diff options
87 files changed, 2490 insertions, 1358 deletions
diff --git a/Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml b/Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml new file mode 100644 index 000000000000..660005601a7f --- /dev/null +++ b/Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml @@ -0,0 +1,88 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/memory-controllers/renesas,rpc-if.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas Reduced Pin Count Interface (RPC-IF) + +maintainers: + - Sergei Shtylyov <sergei.shtylyov@gmail.com> + +description: | + Renesas RPC-IF allows a SPI flash or HyperFlash connected to the SoC to + be accessed via the external address space read mode or the manual mode. + + The flash chip itself should be represented by a subnode of the RPC-IF node. + The flash interface is selected based on the "compatible" property of this + subnode: + - if it contains "jedec,spi-nor", then SPI is used; + - if it contains "cfi-flash", then HyperFlash is used. + +allOf: + - $ref: "/schemas/spi/spi-controller.yaml#" + +properties: + compatible: + items: + - enum: + - renesas,r8a77970-rpc-if # R-Car V3M + - renesas,r8a77980-rpc-if # R-Car V3H + - renesas,r8a77995-rpc-if # R-Car D3 + - const: renesas,rcar-gen3-rpc-if # a generic R-Car gen3 device + + reg: + items: + - description: RPC-IF registers + - description: direct mapping read mode area + - description: write buffer area + + reg-names: + items: + - const: regs + - const: dirmap + - const: wbuf + + clocks: + maxItems: 1 + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + +patternProperties: + "flash@[0-9a-f]+$": + type: object + properties: + compatible: + enum: + - cfi-flash + - jedec,spi-nor + +examples: + - | + #include <dt-bindings/clock/renesas-cpg-mssr.h> + #include <dt-bindings/power/r8a77995-sysc.h> + + spi@ee200000 { + compatible = "renesas,r8a77995-rpc-if", "renesas,rcar-gen3-rpc-if"; + reg = <0xee200000 0x200>, + <0x08000000 0x4000000>, + <0xee208000 0x100>; + reg-names = "regs", "dirmap", "wbuf"; + clocks = <&cpg CPG_MOD 917>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 917>; + #address-cells = <1>; + #size-cells = <0>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <40000000>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <1>; + }; + }; diff --git a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt deleted file mode 100644 index 33bc58f4cf4b..000000000000 --- a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt +++ /dev/null @@ -1,56 +0,0 @@ -* Freescale (Enhanced) Configurable Serial Peripheral Interface - (CSPI/eCSPI) for i.MX - -Required properties: -- compatible : - - "fsl,imx1-cspi" for SPI compatible with the one integrated on i.MX1 - - "fsl,imx21-cspi" for SPI compatible with the one integrated on i.MX21 - - "fsl,imx27-cspi" for SPI compatible with the one integrated on i.MX27 - - "fsl,imx31-cspi" for SPI compatible with the one integrated on i.MX31 - - "fsl,imx35-cspi" for SPI compatible with the one integrated on i.MX35 - - "fsl,imx51-ecspi" for SPI compatible with the one integrated on i.MX51 - - "fsl,imx53-ecspi" for SPI compatible with the one integrated on i.MX53 and later Soc - - "fsl,imx8mq-ecspi" for SPI compatible with the one integrated on i.MX8MQ - - "fsl,imx8mm-ecspi" for SPI compatible with the one integrated on i.MX8MM - - "fsl,imx8mn-ecspi" for SPI compatible with the one integrated on i.MX8MN - - "fsl,imx8mp-ecspi" for SPI compatible with the one integrated on i.MX8MP -- reg : Offset and length of the register set for the device -- interrupts : Should contain CSPI/eCSPI interrupt -- clocks : Clock specifiers for both ipg and per clocks. -- clock-names : Clock names should include both "ipg" and "per" -See the clock consumer binding, - Documentation/devicetree/bindings/clock/clock-bindings.txt - -Recommended properties: -- cs-gpios : GPIOs to use as chip selects, see spi-bus.txt. While the native chip -select lines can be used, they appear to always generate a pulse between each -word of a transfer. Most use cases will require GPIO based chip selects to -generate a valid transaction. - -Optional properties: -- num-cs : Number of total chip selects, see spi-bus.txt. -- dmas: DMA specifiers for tx and rx dma. See the DMA client binding, -Documentation/devicetree/bindings/dma/dma.txt. -- dma-names: DMA request names, if present, should include "tx" and "rx". -- fsl,spi-rdy-drctl: Integer, representing the value of DRCTL, the register -controlling the SPI_READY handling. Note that to enable the DRCTL consideration, -the SPI_READY mode-flag needs to be set too. -Valid values are: 0 (disabled), 1 (edge-triggered burst) and 2 (level-triggered burst). - -Obsolete properties: -- fsl,spi-num-chipselects : Contains the number of the chipselect - -Example: - -ecspi@70010000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx51-ecspi"; - reg = <0x70010000 0x4000>; - interrupts = <36>; - cs-gpios = <&gpio3 24 0>, /* GPIO3_24 */ - <&gpio3 25 0>; /* GPIO3_25 */ - dmas = <&sdma 3 7 1>, <&sdma 4 7 2>; - dma-names = "rx", "tx"; - fsl,spi-rdy-drctl = <1>; -}; diff --git a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.yaml b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.yaml new file mode 100644 index 000000000000..6e44c9c2aeba --- /dev/null +++ b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.yaml @@ -0,0 +1,97 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/fsl-imx-cspi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale (Enhanced) Configurable Serial Peripheral Interface (CSPI/eCSPI) for i.MX + +maintainers: + - Shawn Guo <shawn.guo@linaro.org> + +allOf: + - $ref: "/schemas/spi/spi-controller.yaml#" + +properties: + compatible: + oneOf: + - const: fsl,imx1-cspi + - const: fsl,imx21-cspi + - const: fsl,imx27-cspi + - const: fsl,imx31-cspi + - const: fsl,imx35-cspi + - const: fsl,imx51-ecspi + - const: fsl,imx53-ecspi + - items: + - enum: + - fsl,imx50-ecspi + - fsl,imx6q-ecspi + - fsl,imx6sx-ecspi + - fsl,imx6sl-ecspi + - fsl,imx6sll-ecspi + - fsl,imx6ul-ecspi + - fsl,imx7d-ecspi + - fsl,imx8mq-ecspi + - fsl,imx8mm-ecspi + - fsl,imx8mn-ecspi + - fsl,imx8mp-ecspi + - const: fsl,imx51-ecspi + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: SoC SPI ipg clock + - description: SoC SPI per clock + + clock-names: + items: + - const: ipg + - const: per + + dmas: + items: + - description: DMA controller phandle and request line for RX + - description: DMA controller phandle and request line for TX + + dma-names: + items: + - const: rx + - const: tx + + fsl,spi-rdy-drctl: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Integer, representing the value of DRCTL, the register controlling + the SPI_READY handling. Note that to enable the DRCTL consideration, + the SPI_READY mode-flag needs to be set too. + Valid values are: 0 (disabled), 1 (edge-triggered burst) and 2 (level-triggered burst). + enum: [0, 1, 2] + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/imx5-clock.h> + + spi@70010000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx51-ecspi"; + reg = <0x70010000 0x4000>; + interrupts = <36>; + clocks = <&clks IMX5_CLK_ECSPI1_IPG_GATE>, + <&clks IMX5_CLK_ECSPI1_PER_GATE>; + clock-names = "ipg", "per"; + }; diff --git a/Documentation/devicetree/bindings/spi/mxs-spi.txt b/Documentation/devicetree/bindings/spi/mxs-spi.txt deleted file mode 100644 index 3499b73293c2..000000000000 --- a/Documentation/devicetree/bindings/spi/mxs-spi.txt +++ /dev/null @@ -1,26 +0,0 @@ -* Freescale MX233/MX28 SSP/SPI - -Required properties: -- compatible: Should be "fsl,<soc>-spi", where soc is "imx23" or "imx28" -- reg: Offset and length of the register set for the device -- interrupts: Should contain SSP ERROR interrupt -- dmas: DMA specifier, consisting of a phandle to DMA controller node - and SSP DMA channel ID. - Refer to dma.txt and fsl-mxs-dma.txt for details. -- dma-names: Must be "rx-tx". - -Optional properties: -- clock-frequency : Input clock frequency to the SPI block in Hz. - Default is 160000000 Hz. - -Example: - -ssp0: ssp@80010000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx28-spi"; - reg = <0x80010000 0x2000>; - interrupts = <96>; - dmas = <&dma_apbh 0>; - dma-names = "rx-tx"; -}; diff --git a/Documentation/devicetree/bindings/spi/mxs-spi.yaml b/Documentation/devicetree/bindings/spi/mxs-spi.yaml new file mode 100644 index 000000000000..51f8c664323e --- /dev/null +++ b/Documentation/devicetree/bindings/spi/mxs-spi.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/mxs-spi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale MX233/MX28 SSP/SPI + +maintainers: + - Marek Vasut <marex@denx.de> + +allOf: + - $ref: "/schemas/spi/spi-controller.yaml#" + +properties: + compatible: + enum: + - fsl,imx23-spi + - fsl,imx28-spi + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + dmas: + maxItems: 1 + + dma-names: + const: rx-tx + + clock-frequency: + description: input clock frequency to the SPI block in Hz. + default: 160000000 + +required: + - compatible + - reg + - interrupts + - dmas + - dma-names + +unevaluatedProperties: false + +examples: + - | + spi@80010000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx28-spi"; + reg = <0x80010000 0x2000>; + interrupts = <96>; + dmas = <&dma_apbh 0>; + dma-names = "rx-tx"; + }; diff --git a/Documentation/devicetree/bindings/spi/renesas,sh-msiof.yaml b/Documentation/devicetree/bindings/spi/renesas,sh-msiof.yaml index e84edcf8b332..9f7b118adcaf 100644 --- a/Documentation/devicetree/bindings/spi/renesas,sh-msiof.yaml +++ b/Documentation/devicetree/bindings/spi/renesas,sh-msiof.yaml @@ -21,6 +21,7 @@ properties: # device - items: - enum: + - renesas,msiof-r8a7742 # RZ/G1H - renesas,msiof-r8a7743 # RZ/G1M - renesas,msiof-r8a7744 # RZ/G1N - renesas,msiof-r8a7745 # RZ/G1E @@ -37,6 +38,7 @@ properties: - renesas,msiof-r8a774a1 # RZ/G2M - renesas,msiof-r8a774b1 # RZ/G2N - renesas,msiof-r8a774c0 # RZ/G2E + - renesas,msiof-r8a774e1 # RZ/G2H - renesas,msiof-r8a7795 # R-Car H3 - renesas,msiof-r8a7796 # R-Car M3-W - renesas,msiof-r8a77965 # R-Car M3-N diff --git a/Documentation/devicetree/bindings/spi/spi-davinci.txt b/Documentation/devicetree/bindings/spi/spi-davinci.txt index 9f5b4c7c0c08..e2198a389484 100644 --- a/Documentation/devicetree/bindings/spi/spi-davinci.txt +++ b/Documentation/devicetree/bindings/spi/spi-davinci.txt @@ -1,8 +1,8 @@ Davinci SPI controller device bindings Links on DM: -Keystone 2 - http://www.ti.com/lit/ug/sprugp2a/sprugp2a.pdf -dm644x - http://www.ti.com/lit/ug/sprue32a/sprue32a.pdf +Keystone 2 - https://www.ti.com/lit/ug/sprugp2a/sprugp2a.pdf +dm644x - https://www.ti.com/lit/ug/sprue32a/sprue32a.pdf OMAP-L138/da830 - http://www.ti.com/lit/ug/spruh77a/spruh77a.pdf Required properties: diff --git a/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.txt b/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.txt deleted file mode 100644 index e71b81a41ac0..000000000000 --- a/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.txt +++ /dev/null @@ -1,29 +0,0 @@ -* Freescale Low Power SPI (LPSPI) for i.MX - -Required properties: -- compatible : - - "fsl,imx7ulp-spi" for LPSPI compatible with the one integrated on i.MX7ULP soc - - "fsl,imx8qxp-spi" for LPSPI compatible with the one integrated on i.MX8QXP soc -- reg : address and length of the lpspi master registers -- interrupt-parent : core interrupt controller -- interrupts : lpspi interrupt -- clocks : lpspi clock specifier. Its number and order need to correspond to the - value in clock-names. -- clock-names : Corresponding to per clock and ipg clock in "clocks" - respectively. In i.MX7ULP, it only has per clk, so use CLK_DUMMY - to fill the "ipg" blank. -- spi-slave : spi slave mode support. In slave mode, add this attribute without - value. In master mode, remove it. - -Examples: - -lpspi2: lpspi@40290000 { - compatible = "fsl,imx7ulp-spi"; - reg = <0x40290000 0x10000>; - interrupt-parent = <&intc>; - interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7ULP_CLK_LPSPI2>, - <&clks IMX7ULP_CLK_DUMMY>; - clock-names = "per", "ipg"; - spi-slave; -}; diff --git a/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.yaml b/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.yaml new file mode 100644 index 000000000000..22882e769e26 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.yaml @@ -0,0 +1,67 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/spi-fsl-lpspi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale Low Power SPI (LPSPI) for i.MX + +maintainers: + - Anson Huang <Anson.Huang@nxp.com> + +allOf: + - $ref: "/schemas/spi/spi-controller.yaml#" + +properties: + compatible: + enum: + - fsl,imx7ulp-spi + - fsl,imx8qxp-spi + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: SoC SPI per clock + - description: SoC SPI ipg clock + + clock-names: + items: + - const: per + - const: ipg + + fsl,spi-only-use-cs1-sel: + description: + spi common code does not support use of CS signals discontinuously. + i.MX8DXL-EVK board only uses CS1 without using CS0. Therefore, add + this property to re-config the chipselect value in the LPSPI driver. + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/imx7ulp-clock.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + spi@40290000 { + compatible = "fsl,imx7ulp-spi"; + reg = <0x40290000 0x10000>; + interrupt-parent = <&intc>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7ULP_CLK_LPSPI2>, + <&clks IMX7ULP_CLK_DUMMY>; + clock-names = "per", "ipg"; + spi-slave; + fsl,spi-only-use-cs1-sel; + }; diff --git a/Documentation/devicetree/bindings/spi/spi-lantiq-ssc.txt b/Documentation/devicetree/bindings/spi/spi-lantiq-ssc.txt index ce3230c8e28d..76a3dd35f796 100644 --- a/Documentation/devicetree/bindings/spi/spi-lantiq-ssc.txt +++ b/Documentation/devicetree/bindings/spi/spi-lantiq-ssc.txt @@ -1,11 +1,17 @@ Lantiq Synchronous Serial Controller (SSC) SPI master driver Required properties: -- compatible: "lantiq,ase-spi", "lantiq,falcon-spi", "lantiq,xrx100-spi" +- compatible: "lantiq,ase-spi", "lantiq,falcon-spi", "lantiq,xrx100-spi", + "intel,lgm-spi" - #address-cells: see spi-bus.txt - #size-cells: see spi-bus.txt - reg: address and length of the spi master registers -- interrupts: should contain the "spi_rx", "spi_tx" and "spi_err" interrupt. +- interrupts: + For compatible "intel,lgm-ssc" - the common interrupt number for + all of tx rx & err interrupts. + or + For rest of the compatibles, should contain the "spi_rx", "spi_tx" and + "spi_err" interrupt. Optional properties: @@ -27,3 +33,14 @@ spi: spi@e100800 { num-cs = <6>; base-cs = <1>; }; + +ssc0: spi@e0800000 { + compatible = "intel,lgm-spi"; + reg = <0xe0800000 0x400>; + interrupt-parent = <&ioapic1>; + interrupts = <35 1>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cgu0 LGM_CLK_NGI>, <&cgu0 LGM_GCLK_SSC0>; + clock-names = "freq", "gate"; +}; diff --git a/Documentation/devicetree/bindings/spi/spi-mt65xx.txt b/Documentation/devicetree/bindings/spi/spi-mt65xx.txt index 3a8079eb18c8..9e43721fa7d6 100644 --- a/Documentation/devicetree/bindings/spi/spi-mt65xx.txt +++ b/Documentation/devicetree/bindings/spi/spi-mt65xx.txt @@ -11,6 +11,7 @@ Required properties: - mediatek,mt8135-spi: for mt8135 platforms - mediatek,mt8173-spi: for mt8173 platforms - mediatek,mt8183-spi: for mt8183 platforms + - "mediatek,mt8192-spi", "mediatek,mt6765-spi": for mt8192 platforms - "mediatek,mt8516-spi", "mediatek,mt2712-spi": for mt8516 platforms - #address-cells: should be 1. diff --git a/Documentation/spi/spi-sc18is602.rst b/Documentation/spi/spi-sc18is602.rst index 2a31dc722321..4ab9ca346b44 100644 --- a/Documentation/spi/spi-sc18is602.rst +++ b/Documentation/spi/spi-sc18is602.rst @@ -6,7 +6,7 @@ Supported chips: * NXP SI18IS602/602B/603 - Datasheet: http://www.nxp.com/documents/data_sheet/SC18IS602_602B_603.pdf + Datasheet: https://www.nxp.com/documents/data_sheet/SC18IS602_602B_603.pdf Author: Guenter Roeck <linux@roeck-us.net> diff --git a/arch/arm/mach-imx/devices-imx27.h b/arch/arm/mach-imx/devices-imx27.h index f89f4ae0e1ca..583a1d773d68 100644 --- a/arch/arm/mach-imx/devices-imx27.h +++ b/arch/arm/mach-imx/devices-imx27.h @@ -75,11 +75,11 @@ extern const struct imx_mxc_w1_data imx27_mxc_w1_data; imx_add_mxc_w1(&imx27_mxc_w1_data) extern const struct imx_spi_imx_data imx27_cspi_data[]; -#define imx27_add_cspi(id, pdata) \ - imx_add_spi_imx(&imx27_cspi_data[id], pdata) -#define imx27_add_spi_imx0(pdata) imx27_add_cspi(0, pdata) -#define imx27_add_spi_imx1(pdata) imx27_add_cspi(1, pdata) -#define imx27_add_spi_imx2(pdata) imx27_add_cspi(2, pdata) +#define imx27_add_cspi(id, gtable) \ + imx_add_spi_imx(&imx27_cspi_data[id], gtable) +#define imx27_add_spi_imx0(gtable) imx27_add_cspi(0, gtable) +#define imx27_add_spi_imx1(gtable) imx27_add_cspi(1, gtable) +#define imx27_add_spi_imx2(gtable) imx27_add_cspi(2, gtable) extern const struct imx_pata_imx_data imx27_pata_imx_data; #define imx27_add_pata_imx() \ diff --git a/arch/arm/mach-imx/devices-imx31.h b/arch/arm/mach-imx/devices-imx31.h index 5a4ba35a47ed..f7cc62372532 100644 --- a/arch/arm/mach-imx/devices-imx31.h +++ b/arch/arm/mach-imx/devices-imx31.h @@ -69,11 +69,11 @@ extern const struct imx_mxc_w1_data imx31_mxc_w1_data; imx_add_mxc_w1(&imx31_mxc_w1_data) extern const struct imx_spi_imx_data imx31_cspi_data[]; -#define imx31_add_cspi(id, pdata) \ - imx_add_spi_imx(&imx31_cspi_data[id], pdata) -#define imx31_add_spi_imx0(pdata) imx31_add_cspi(0, pdata) -#define imx31_add_spi_imx1(pdata) imx31_add_cspi(1, pdata) -#define imx31_add_spi_imx2(pdata) imx31_add_cspi(2, pdata) +#define imx31_add_cspi(id, gtable) \ + imx_add_spi_imx(&imx31_cspi_data[id], gtable) +#define imx31_add_spi_imx0(gtable) imx31_add_cspi(0, gtable) +#define imx31_add_spi_imx1(gtable) imx31_add_cspi(1, gtable) +#define imx31_add_spi_imx2(gtable) imx31_add_cspi(2, gtable) extern const struct imx_pata_imx_data imx31_pata_imx_data; #define imx31_add_pata_imx() \ diff --git a/arch/arm/mach-imx/devices/devices-common.h b/arch/arm/mach-imx/devices/devices-common.h index ae84c08e11fa..327a1de7dce1 100644 --- a/arch/arm/mach-imx/devices/devices-common.h +++ b/arch/arm/mach-imx/devices/devices-common.h @@ -6,6 +6,7 @@ #include <linux/kernel.h> #include <linux/platform_device.h> #include <linux/init.h> +#include <linux/gpio/machine.h> #include <linux/platform_data/dma-imx-sdma.h> extern struct device mxc_aips_bus; @@ -276,7 +277,6 @@ struct platform_device *__init imx_add_sdhci_esdhc_imx( const struct imx_sdhci_esdhc_imx_data *data, const struct esdhc_platform_data *pdata); -#include <linux/platform_data/spi-imx.h> struct imx_spi_imx_data { const char *devid; int id; @@ -285,8 +285,7 @@ struct imx_spi_imx_data { int irq; }; struct platform_device *__init imx_add_spi_imx( - const struct imx_spi_imx_data *data, - const struct spi_imx_master *pdata); + const struct imx_spi_imx_data *data, struct gpiod_lookup_table *gtable); struct platform_device *imx_add_imx_dma(char *name, resource_size_t iobase, int irq); diff --git a/arch/arm/mach-imx/devices/platform-spi_imx.c b/arch/arm/mach-imx/devices/platform-spi_imx.c index f2cafa52c187..27747bf628a3 100644 --- a/arch/arm/mach-imx/devices/platform-spi_imx.c +++ b/arch/arm/mach-imx/devices/platform-spi_imx.c @@ -3,6 +3,7 @@ * Copyright (C) 2009-2010 Pengutronix * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> */ +#include <linux/gpio/machine.h> #include "../hardware.h" #include "devices-common.h" @@ -57,8 +58,7 @@ const struct imx_spi_imx_data imx35_cspi_data[] __initconst = { #endif /* ifdef CONFIG_SOC_IMX35 */ struct platform_device *__init imx_add_spi_imx( - const struct imx_spi_imx_data *data, - const struct spi_imx_master *pdata) + const struct imx_spi_imx_data *data, struct gpiod_lookup_table *gtable) { struct resource res[] = { { @@ -71,7 +71,8 @@ struct platform_device *__init imx_add_spi_imx( .flags = IORESOURCE_IRQ, }, }; - + if (gtable) + gpiod_add_lookup_table(gtable); return imx_add_platform_device(data->devid, data->id, - res, ARRAY_SIZE(res), pdata, sizeof(*pdata)); + res, ARRAY_SIZE(res), NULL, 0); } diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c index 1da5f07952ac..2db4475b7f85 100644 --- a/arch/arm/mach-imx/mach-mx27_3ds.c +++ b/arch/arm/mach-imx/mach-mx27_3ds.c @@ -303,18 +303,34 @@ static struct imx_ssi_platform_data mx27_3ds_ssi_pdata = { }; /* SPI */ -static int spi1_chipselect[] = {SPI1_SS0}; - -static const struct spi_imx_master spi1_pdata __initconst = { - .chipselect = spi1_chipselect, - .num_chipselect = ARRAY_SIZE(spi1_chipselect), +static struct gpiod_lookup_table mx27_spi1_gpiod_table = { + .dev_id = "imx27-cspi.0", /* Actual device name for spi1 */ + .table = { + /* + * The i.MX27 has the i.MX21 GPIO controller, the SPI1 CS GPIO + * SPI1_SS0 is numbered IMX_GPIO_NR(4, 28). + * + * This is in "bank 4" which is subtracted by one in the macro + * so this is actually bank 3 on "imx21-gpio.3". + */ + GPIO_LOOKUP_IDX("imx21-gpio.3", 28, "cs", 0, GPIO_ACTIVE_LOW), + { }, + }, }; -static int spi2_chipselect[] = {SPI2_SS0}; - -static const struct spi_imx_master spi2_pdata __initconst = { - .chipselect = spi2_chipselect, - .num_chipselect = ARRAY_SIZE(spi2_chipselect), +static struct gpiod_lookup_table mx27_spi2_gpiod_table = { + .dev_id = "imx27-cspi.1", /* Actual device name for spi2 */ + .table = { + /* + * The i.MX27 has the i.MX21 GPIO controller, the SPI2 CS GPIO + * SPI2_SS0 is numbered IMX_GPIO_NR(4, 21). + * + * This is in "bank 4" which is subtracted by one in the macro + * so this is actually bank 3 on "imx21-gpio.3". + */ + GPIO_LOOKUP_IDX("imx21-gpio.3", 21, "cs", 0, GPIO_ACTIVE_LOW), + { }, + }, }; static struct imx_fb_videomode mx27_3ds_modes[] = { @@ -397,8 +413,8 @@ static void __init mx27pdk_init(void) imx27_add_imx_keypad(&mx27_3ds_keymap_data); imx27_add_imx2_wdt(); - imx27_add_spi_imx1(&spi2_pdata); - imx27_add_spi_imx0(&spi1_pdata); + imx27_add_spi_imx1(&mx27_spi2_gpiod_table); + imx27_add_spi_imx0(&mx27_spi1_gpiod_table); imx27_add_imx_i2c(0, &mx27_3ds_i2c0_data); imx27_add_imx_fb(&mx27_3ds_fb_data); diff --git a/arch/arm/mach-imx/mach-mx31_3ds.c b/arch/arm/mach-imx/mach-mx31_3ds.c index e81386190479..23e63d3b4c6a 100644 --- a/arch/arm/mach-imx/mach-mx31_3ds.c +++ b/arch/arm/mach-imx/mach-mx31_3ds.c @@ -378,15 +378,6 @@ static struct imx_ssi_platform_data mx31_3ds_ssi_pdata = { .flags = IMX_SSI_DMA | IMX_SSI_NET, }; -/* SPI */ -static const struct spi_imx_master spi0_pdata __initconst = { - .num_chipselect = 3, -}; - -static const struct spi_imx_master spi1_pdata __initconst = { - .num_chipselect = 3, -}; - static struct spi_board_info mx31_3ds_spi_devs[] __initdata = { { .modalias = "mc13783", @@ -561,14 +552,14 @@ static void __init mx31_3ds_init(void) imx31_add_imx_uart0(&uart_pdata); imx31_add_mxc_nand(&mx31_3ds_nand_board_info); - imx31_add_spi_imx1(&spi1_pdata); + imx31_add_spi_imx1(NULL); imx31_add_imx_keypad(&mx31_3ds_keymap_data); imx31_add_imx2_wdt(); imx31_add_imx_i2c0(&mx31_3ds_i2c0_data); - imx31_add_spi_imx0(&spi0_pdata); + imx31_add_spi_imx0(NULL); imx31_add_ipu_core(); imx31_add_mx3_sdc_fb(&mx3fb_pdata); diff --git a/arch/arm/mach-imx/mach-mx31lilly.c b/arch/arm/mach-imx/mach-mx31lilly.c index 8f725248299e..4b955ccc92cd 100644 --- a/arch/arm/mach-imx/mach-mx31lilly.c +++ b/arch/arm/mach-imx/mach-mx31lilly.c @@ -215,16 +215,6 @@ static void __init lilly1131_usb_init(void) imx31_add_mxc_ehci_hs(2, &usbh2_pdata); } -/* SPI */ - -static const struct spi_imx_master spi0_pdata __initconst = { - .num_chipselect = 3, -}; - -static const struct spi_imx_master spi1_pdata __initconst = { - .num_chipselect = 3, -}; - static struct mc13xxx_platform_data mc13783_pdata __initdata = { .flags = MC13XXX_USE_RTC | MC13XXX_USE_TOUCHSCREEN, }; @@ -281,8 +271,8 @@ static void __init mx31lilly_board_init(void) mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SS1__SS1, "SPI2_SS1"); mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SS2__SS2, "SPI2_SS2"); - imx31_add_spi_imx0(&spi0_pdata); - imx31_add_spi_imx1(&spi1_pdata); + imx31_add_spi_imx0(NULL); + imx31_add_spi_imx1(NULL); regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); } diff --git a/arch/arm/mach-imx/mach-mx31lite.c b/arch/arm/mach-imx/mach-mx31lite.c index c0055f57c02d..aaccf52f7ac1 100644 --- a/arch/arm/mach-imx/mach-mx31lite.c +++ b/arch/arm/mach-imx/mach-mx31lite.c @@ -73,11 +73,6 @@ static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; -/* SPI */ -static const struct spi_imx_master spi0_pdata __initconst = { - .num_chipselect = 3, -}; - static const struct mxc_nand_platform_data mx31lite_nand_board_info __initconst = { .width = 1, @@ -111,16 +106,6 @@ static struct platform_device smsc911x_device = { }, }; -/* - * SPI - * - * The MC13783 is the only hard-wired SPI device on the module. - */ - -static const struct spi_imx_master spi1_pdata __initconst = { - .num_chipselect = 1, -}; - static struct mc13xxx_platform_data mc13783_pdata __initdata = { .flags = MC13XXX_USE_RTC, }; @@ -246,13 +231,13 @@ static void __init mx31lite_init(void) "mx31lite"); imx31_add_imx_uart0(&uart_pdata); - imx31_add_spi_imx0(&spi0_pdata); + imx31_add_spi_imx0(NULL); /* NOR and NAND flash */ platform_device_register(&physmap_flash_device); imx31_add_mxc_nand(&mx31lite_nand_board_info); - imx31_add_spi_imx1(&spi1_pdata); + imx31_add_spi_imx1(NULL); regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); } diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c index 36f08f45b0ca..96845a4eaf57 100644 --- a/arch/arm/mach-imx/mach-mx31moboard.c +++ b/arch/arm/mach-imx/mach-mx31moboard.c @@ -143,10 +143,6 @@ static const struct imxi2c_platform_data moboard_i2c1_data __initconst = { .bitrate = 100000, }; -static const struct spi_imx_master moboard_spi1_pdata __initconst = { - .num_chipselect = 3, -}; - static struct regulator_consumer_supply sdhc_consumers[] = { { .dev_name = "imx31-mmc.0", @@ -287,10 +283,6 @@ static struct spi_board_info moboard_spi_board_info[] __initdata = { }, }; -static const struct spi_imx_master moboard_spi2_pdata __initconst = { - .num_chipselect = 2, -}; - #define SDHC1_CD IOMUX_TO_GPIO(MX31_PIN_ATA_CS0) #define SDHC1_WP IOMUX_TO_GPIO(MX31_PIN_ATA_CS1) @@ -514,8 +506,8 @@ static void __init mx31moboard_init(void) imx31_add_imx_i2c0(&moboard_i2c0_data); imx31_add_imx_i2c1(&moboard_i2c1_data); - imx31_add_spi_imx1(&moboard_spi1_pdata); - imx31_add_spi_imx2(&moboard_spi2_pdata); + imx31_add_spi_imx1(NULL); + imx31_add_spi_imx2(NULL); mx31moboard_init_cam(); diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c index 2e28e1b5cddf..27a3678e0658 100644 --- a/arch/arm/mach-imx/mach-pca100.c +++ b/arch/arm/mach-imx/mach-pca100.c @@ -14,6 +14,7 @@ #include <linux/irq.h> #include <linux/delay.h> #include <linux/gpio.h> +#include <linux/gpio/machine.h> #include <linux/usb/otg.h> #include <linux/usb/ulpi.h> @@ -188,11 +189,19 @@ static struct spi_board_info pca100_spi_board_info[] __initdata = { }, }; -static int pca100_spi_cs[] = {SPI1_SS0, SPI1_SS1}; - -static const struct spi_imx_master pca100_spi0_data __initconst = { - .chipselect = pca100_spi_cs, - .num_chipselect = ARRAY_SIZE(pca100_spi_cs), +static struct gpiod_lookup_table pca100_spi0_gpiod_table = { + .dev_id = "imx27-cspi.0", /* Actual device name for spi0 */ + .table = { + /* + * The i.MX27 has the i.MX21 GPIO controller, port D is + * bank 3 and thus named "imx21-gpio.3". + * SPI1_SS0 is GPIO_PORTD + 28 + * SPI1_SS1 is GPIO_PORTD + 27 + */ + GPIO_LOOKUP_IDX("imx21-gpio.3", 28, "cs", 0, GPIO_ACTIVE_LOW), + GPIO_LOOKUP_IDX("imx21-gpio.3", 27, "cs", 1, GPIO_ACTIVE_LOW), + { }, + }, }; static void pca100_ac97_warm_reset(struct snd_ac97 *ac97) @@ -362,7 +371,7 @@ static void __init pca100_init(void) mxc_gpio_mode(GPIO_PORTD | 27 | GPIO_GPIO | GPIO_IN); spi_register_board_info(pca100_spi_board_info, ARRAY_SIZE(pca100_spi_board_info)); - imx27_add_spi_imx0(&pca100_spi0_data); + imx27_add_spi_imx0(&pca100_spi0_gpiod_table); imx27_add_imx_fb(&pca100_fb_data); diff --git a/arch/arm/mach-imx/mach-pcm037_eet.c b/arch/arm/mach-imx/mach-pcm037_eet.c index 51f5142920cf..8b0e03a595c1 100644 --- a/arch/arm/mach-imx/mach-pcm037_eet.c +++ b/arch/arm/mach-imx/mach-pcm037_eet.c @@ -52,11 +52,6 @@ static struct spi_board_info pcm037_spi_dev[] = { }, }; -/* Platform Data for MXC CSPI */ -static const struct spi_imx_master pcm037_spi1_pdata __initconst = { - .num_chipselect = 2, -}; - /* GPIO-keys input device */ static struct gpio_keys_button pcm037_gpio_keys[] = { { @@ -163,7 +158,7 @@ int __init pcm037_eet_init_devices(void) /* SPI */ spi_register_board_info(pcm037_spi_dev, ARRAY_SIZE(pcm037_spi_dev)); - imx31_add_spi_imx0(&pcm037_spi1_pdata); + imx31_add_spi_imx0(NULL); imx_add_gpio_keys(&pcm037_gpio_keys_platform_data); diff --git a/drivers/gpio/gpiolib-of.c b/drivers/gpio/gpiolib-of.c index 219eb0054233..e3e88510aec7 100644 --- a/drivers/gpio/gpiolib-of.c +++ b/drivers/gpio/gpiolib-of.c @@ -26,7 +26,7 @@ /** * of_gpio_spi_cs_get_count() - special GPIO counting for SPI * Some elder GPIO controllers need special quirks. Currently we handle - * the Freescale GPIO controller with bindings that doesn't use the + * the Freescale and PPC GPIO controller with bindings that doesn't use the * established "cs-gpios" for chip selects but instead rely on * "gpios" for the chip select lines. If we detect this, we redirect * the counting of "cs-gpios" to count "gpios" transparent to the @@ -41,7 +41,8 @@ static int of_gpio_spi_cs_get_count(struct device *dev, const char *con_id) if (!con_id || strcmp(con_id, "cs")) return 0; if (!of_device_is_compatible(np, "fsl,spi") && - !of_device_is_compatible(np, "aeroflexgaisler,spictrl")) + !of_device_is_compatible(np, "aeroflexgaisler,spictrl") && + !of_device_is_compatible(np, "ibm,ppc4xx-spi")) return 0; return of_gpio_named_count(np, "gpios"); } @@ -405,9 +406,10 @@ static struct gpio_desc *of_find_spi_cs_gpio(struct device *dev, if (!IS_ENABLED(CONFIG_SPI_MASTER)) return ERR_PTR(-ENOENT); - /* Allow this specifically for Freescale devices */ + /* Allow this specifically for Freescale and PPC devices */ if (!of_device_is_compatible(np, "fsl,spi") && - !of_device_is_compatible(np, "aeroflexgaisler,spictrl")) + !of_device_is_compatible(np, "aeroflexgaisler,spictrl") && + !of_device_is_compatible(np, "ibm,ppc4xx-spi")) return ERR_PTR(-ENOENT); /* Allow only if asking for "cs-gpios" */ if (!con_id || strcmp(con_id, "cs")) diff --git a/drivers/memory/Kconfig b/drivers/memory/Kconfig index 04368ee2a809..e438d79857da 100644 --- a/drivers/memory/Kconfig +++ b/drivers/memory/Kconfig @@ -174,6 +174,15 @@ config PL353_SMC This driver is for the ARM PL351/PL353 Static Memory Controller(SMC) module. +config RENESAS_RPCIF + tristate "Renesas RPC-IF driver" + depends on ARCH_RENESAS + select REGMAP_MMIO + help + This supports Renesas R-Car Gen3 RPC-IF which provides either SPI + host or HyperFlash. You'll have to select individual components + under the corresponding menu. + source "drivers/memory/samsung/Kconfig" source "drivers/memory/tegra/Kconfig" diff --git a/drivers/memory/Makefile b/drivers/memory/Makefile index 6d7e3e64ba62..d105f8ebe8b8 100644 --- a/drivers/memory/Makefile +++ b/drivers/memory/Makefile @@ -22,6 +22,7 @@ obj-$(CONFIG_JZ4780_NEMC) += jz4780-nemc.o obj-$(CONFIG_MTK_SMI) += mtk-smi.o obj-$(CONFIG_DA8XX_DDRCTL) += da8xx-ddrctl.o obj-$(CONFIG_PL353_SMC) += pl353-smc.o +obj-$(CONFIG_RENESAS_RPCIF) += renesas-rpc-if.o obj-$(CONFIG_SAMSUNG_MC) += samsung/ obj-$(CONFIG_TEGRA_MC) += tegra/ diff --git a/drivers/memory/renesas-rpc-if.c b/drivers/memory/renesas-rpc-if.c new file mode 100644 index 000000000000..88f51ec8f1d1 --- /dev/null +++ b/drivers/memory/renesas-rpc-if.c @@ -0,0 +1,603 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Renesas RPC-IF core driver + * + * Copyright (C) 2018-2019 Renesas Solutions Corp. + * Copyright (C) 2019 Macronix International Co., Ltd. + * Copyright (C) 2019-2020 Cogent Embedded, Inc. + */ + +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/of.h> +#include <linux/pm_runtime.h> +#include <linux/regmap.h> +#include <linux/reset.h> + +#include <memory/renesas-rpc-if.h> + +#define RPCIF_CMNCR 0x0000 /* R/W */ +#define RPCIF_CMNCR_MD BIT(31) +#define RPCIF_CMNCR_SFDE BIT(24) /* undocumented but must be set */ +#define RPCIF_CMNCR_MOIIO3(val) (((val) & 0x3) << 22) +#define RPCIF_CMNCR_MOIIO2(val) (((val) & 0x3) << 20) +#define RPCIF_CMNCR_MOIIO1(val) (((val) & 0x3) << 18) +#define RPCIF_CMNCR_MOIIO0(val) (((val) & 0x3) << 16) +#define RPCIF_CMNCR_MOIIO_HIZ (RPCIF_CMNCR_MOIIO0(3) | \ + RPCIF_CMNCR_MOIIO1(3) | \ + RPCIF_CMNCR_MOIIO2(3) | RPCIF_CMNCR_MOIIO3(3)) +#define RPCIF_CMNCR_IO3FV(val) (((val) & 0x3) << 14) /* undocumented */ +#define RPCIF_CMNCR_IO2FV(val) (((val) & 0x3) << 12) /* undocumented */ +#define RPCIF_CMNCR_IO0FV(val) (((val) & 0x3) << 8) +#define RPCIF_CMNCR_IOFV_HIZ (RPCIF_CMNCR_IO0FV(3) | RPCIF_CMNCR_IO2FV(3) | \ + RPCIF_CMNCR_IO3FV(3)) +#define RPCIF_CMNCR_BSZ(val) (((val) & 0x3) << 0) + +#define RPCIF_SSLDR 0x0004 /* R/W */ +#define RPCIF_SSLDR_SPNDL(d) (((d) & 0x7) << 16) +#define RPCIF_SSLDR_SLNDL(d) (((d) & 0x7) << 8) +#define RPCIF_SSLDR_SCKDL(d) (((d) & 0x7) << 0) + +#define RPCIF_DRCR 0x000C /* R/W */ +#define RPCIF_DRCR_SSLN BIT(24) +#define RPCIF_DRCR_RBURST(v) ((((v) - 1) & 0x1F) << 16) +#define RPCIF_DRCR_RCF BIT(9) +#define RPCIF_DRCR_RBE BIT(8) +#define RPCIF_DRCR_SSLE BIT(0) + +#define RPCIF_DRCMR 0x0010 /* R/W */ +#define RPCIF_DRCMR_CMD(c) (((c) & 0xFF) << 16) +#define RPCIF_DRCMR_OCMD(c) (((c) & 0xFF) << 0) + +#define RPCIF_DREAR 0x0014 /* R/W */ +#define RPCIF_DREAR_EAV(c) (((c) & 0xF) << 16) +#define RPCIF_DREAR_EAC(c) (((c) & 0x7) << 0) + +#define RPCIF_DROPR 0x0018 /* R/W */ + +#define RPCIF_DRENR 0x001C /* R/W */ +#define RPCIF_DRENR_CDB(o) (u32)((((o) & 0x3) << 30)) +#define RPCIF_DRENR_OCDB(o) (((o) & 0x3) << 28) +#define RPCIF_DRENR_ADB(o) (((o) & 0x3) << 24) +#define RPCIF_DRENR_OPDB(o) (((o) & 0x3) << 20) +#define RPCIF_DRENR_DRDB(o) (((o) & 0x3) << 16) +#define RPCIF_DRENR_DME BIT(15) +#define RPCIF_DRENR_CDE BIT(14) +#define RPCIF_DRENR_OCDE BIT(12) +#define RPCIF_DRENR_ADE(v) (((v) & 0xF) << 8) +#define RPCIF_DRENR_OPDE(v) (((v) & 0xF) << 4) + +#define RPCIF_SMCR 0x0020 /* R/W */ +#define RPCIF_SMCR_SSLKP BIT(8) +#define RPCIF_SMCR_SPIRE BIT(2) +#define RPCIF_SMCR_SPIWE BIT(1) +#define RPCIF_SMCR_SPIE BIT(0) + +#define RPCIF_SMCMR 0x0024 /* R/W */ +#define RPCIF_SMCMR_CMD(c) (((c) & 0xFF) << 16) +#define RPCIF_SMCMR_OCMD(c) (((c) & 0xFF) << 0) + +#define RPCIF_SMADR 0x0028 /* R/W */ + +#define RPCIF_SMOPR 0x002C /* R/W */ +#define RPCIF_SMOPR_OPD3(o) (((o) & 0xFF) << 24) +#define RPCIF_SMOPR_OPD2(o) (((o) & 0xFF) << 16) +#define RPCIF_SMOPR_OPD1(o) (((o) & 0xFF) << 8) +#define RPCIF_SMOPR_OPD0(o) (((o) & 0xFF) << 0) + +#define RPCIF_SMENR 0x0030 /* R/W */ +#define RPCIF_SMENR_CDB(o) (((o) & 0x3) << 30) +#define RPCIF_SMENR_OCDB(o) (((o) & 0x3) << 28) +#define RPCIF_SMENR_ADB(o) (((o) & 0x3) << 24) +#define RPCIF_SMENR_OPDB(o) (((o) & 0x3) << 20) +#define RPCIF_SMENR_SPIDB(o) (((o) & 0x3) << 16) +#define RPCIF_SMENR_DME BIT(15) +#define RPCIF_SMENR_CDE BIT(14) +#define RPCIF_SMENR_OCDE BIT(12) +#define RPCIF_SMENR_ADE(v) (((v) & 0xF) << 8) +#define RPCIF_SMENR_OPDE(v) (((v) & 0xF) << 4) +#define RPCIF_SMENR_SPIDE(v) (((v) & 0xF) << 0) + +#define RPCIF_SMRDR0 0x0038 /* R */ +#define RPCIF_SMRDR1 0x003C /* R */ +#define RPCIF_SMWDR0 0x0040 /* W */ +#define RPCIF_SMWDR1 0x0044 /* W */ + +#define RPCIF_CMNSR 0x0048 /* R */ +#define RPCIF_CMNSR_SSLF BIT(1) +#define RPCIF_CMNSR_TEND BIT(0) + +#define RPCIF_DRDMCR 0x0058 /* R/W */ +#define RPCIF_DMDMCR_DMCYC(v) ((((v) - 1) & 0x1F) << 0) + +#define RPCIF_DRDRENR 0x005C /* R/W */ +#define RPCIF_DRDRENR_HYPE(v) (((v) & 0x7) << 12) +#define RPCIF_DRDRENR_ADDRE BIT(8) +#define RPCIF_DRDRENR_OPDRE BIT(4) +#define RPCIF_DRDRENR_DRDRE BIT(0) + +#define RPCIF_SMDMCR 0x0060 /* R/W */ +#define RPCIF_SMDMCR_DMCYC(v) ((((v) - 1) & 0x1F) << 0) + +#define RPCIF_SMDRENR 0x0064 /* R/W */ +#define RPCIF_SMDRENR_HYPE(v) (((v) & 0x7) << 12) +#define RPCIF_SMDRENR_ADDRE BIT(8) +#define RPCIF_SMDRENR_OPDRE BIT(4) +#define RPCIF_SMDRENR_SPIDRE BIT(0) + +#define RPCIF_PHYCNT 0x007C /* R/W */ +#define RPCIF_PHYCNT_CAL BIT(31) +#define RPCIF_PHYCNT_OCTA(v) (((v) & 0x3) << 22) +#define RPCIF_PHYCNT_EXDS BIT(21) +#define RPCIF_PHYCNT_OCT BIT(20) +#define RPCIF_PHYCNT_DDRCAL BIT(19) +#define RPCIF_PHYCNT_HS BIT(18) +#define RPCIF_PHYCNT_STRTIM(v) (((v) & 0x7) << 15) +#define RPCIF_PHYCNT_WBUF2 BIT(4) +#define RPCIF_PHYCNT_WBUF BIT(2) +#define RPCIF_PHYCNT_PHYMEM(v) (((v) & 0x3) << 0) + +#define RPCIF_PHYOFFSET1 0x0080 /* R/W */ +#define RPCIF_PHYOFFSET1_DDRTMG(v) (((v) & 0x3) << 28) + +#define RPCIF_PHYOFFSET2 0x0084 /* R/W */ +#define RPCIF_PHYOFFSET2_OCTTMG(v) (((v) & 0x7) << 8) + +#define RPCIF_PHYINT 0x0088 /* R/W */ +#define RPCIF_PHYINT_WPVAL BIT(1) + +#define RPCIF_DIRMAP_SIZE 0x4000000 + +static const struct regmap_range rpcif_volatile_ranges[] = { + regmap_reg_range(RPCIF_SMRDR0, RPCIF_SMRDR1), + regmap_reg_range(RPCIF_SMWDR0, RPCIF_SMWDR1), + regmap_reg_range(RPCIF_CMNSR, RPCIF_CMNSR), +}; + +static const struct regmap_access_table rpcif_volatile_table = { + .yes_ranges = rpcif_volatile_ranges, + .n_yes_ranges = ARRAY_SIZE(rpcif_volatile_ranges), +}; + +static const struct regmap_config rpcif_regmap_config = { + .reg_bits = 32, + .val_bits = 32, + .reg_stride = 4, + .fast_io = true, + .max_register = RPCIF_PHYINT, + .volatile_table = &rpcif_volatile_table, +}; + +int rpcif_sw_init(struct rpcif *rpc, struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct resource *res; + void __iomem *base; + + rpc->dev = dev; + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs"); + base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(base)) + return PTR_ERR(base); + + rpc->regmap = devm_regmap_init_mmio(&pdev->dev, base, + &rpcif_regmap_config); + if (IS_ERR(rpc->regmap)) { + dev_err(&pdev->dev, + "failed to init regmap for rpcif, error %ld\n", + PTR_ERR(rpc->regmap)); + return PTR_ERR(rpc->regmap); + } + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dirmap"); + rpc->size = resource_size(res); + rpc->dirmap = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(rpc->dirmap)) + rpc->dirmap = NULL; + + rpc->rstc = devm_reset_control_get_exclusive(&pdev->dev, NULL); + if (IS_ERR(rpc->rstc)) + return PTR_ERR(rpc->rstc); + + return 0; +} +EXPORT_SYMBOL(rpcif_sw_init); + +void rpcif_enable_rpm(struct rpcif *rpc) +{ + pm_runtime_enable(rpc->dev); +} +EXPORT_SYMBOL(rpcif_enable_rpm); + +void rpcif_disable_rpm(struct rpcif *rpc) +{ + pm_runtime_put_sync(rpc->dev); +} +EXPORT_SYMBOL(rpcif_disable_rpm); + +void rpcif_hw_init(struct rpcif *rpc, bool hyperflash) +{ + u32 dummy; + + pm_runtime_get_sync(rpc->dev); + + /* + * NOTE: The 0x260 are undocumented bits, but they must be set. + * RPCIF_PHYCNT_STRTIM is strobe timing adjustment bits, + * 0x0 : the delay is biggest, + * 0x1 : the delay is 2nd biggest, + * On H3 ES1.x, the value should be 0, while on others, + * the value should be 7. + */ + regmap_write(rpc->regmap, RPCIF_PHYCNT, RPCIF_PHYCNT_STRTIM(7) | + RPCIF_PHYCNT_PHYMEM(hyperflash ? 3 : 0) | 0x260); + + /* + * NOTE: The 0x1511144 are undocumented bits, but they must be set + * for RPCIF_PHYOFFSET1. + * The 0x31 are undocumented bits, but they must be set + * for RPCIF_PHYOFFSET2. + */ + regmap_write(rpc->regmap, RPCIF_PHYOFFSET1, 0x1511144 | + RPCIF_PHYOFFSET1_DDRTMG(3)); + regmap_write(rpc->regmap, RPCIF_PHYOFFSET2, 0x31 | + RPCIF_PHYOFFSET2_OCTTMG(4)); + + if (hyperflash) + regmap_update_bits(rpc->regmap, RPCIF_PHYINT, + RPCIF_PHYINT_WPVAL, 0); + + regmap_write(rpc->regmap, RPCIF_CMNCR, RPCIF_CMNCR_SFDE | + RPCIF_CMNCR_MOIIO_HIZ | RPCIF_CMNCR_IOFV_HIZ | + RPCIF_CMNCR_BSZ(hyperflash ? 1 : 0)); + /* Set RCF after BSZ update */ + regmap_write(rpc->regmap, RPCIF_DRCR, RPCIF_DRCR_RCF); + /* Dummy read according to spec */ + regmap_read(rpc->regmap, RPCIF_DRCR, &dummy); + regmap_write(rpc->regmap, RPCIF_SSLDR, RPCIF_SSLDR_SPNDL(7) | + RPCIF_SSLDR_SLNDL(7) | RPCIF_SSLDR_SCKDL(7)); + + pm_runtime_put(rpc->dev); + + rpc->bus_size = hyperflash ? 2 : 1; +} +EXPORT_SYMBOL(rpcif_hw_init); + +static int wait_msg_xfer_end(struct rpcif *rpc) +{ + u32 sts; + + return regmap_read_poll_timeout(rpc->regmap, RPCIF_CMNSR, sts, + sts & RPCIF_CMNSR_TEND, 0, + USEC_PER_SEC); +} + +static u8 rpcif_bits_set(struct rpcif *rpc, u32 nbytes) +{ + if (rpc->bus_size == 2) + nbytes /= 2; + nbytes = clamp(nbytes, 1U, 4U); + return GENMASK(3, 4 - nbytes); +} + +static u8 rpcif_bit_size(u8 buswidth) +{ + return buswidth > 4 ? 2 : ilog2(buswidth); +} + +void rpcif_prepare(struct rpcif *rpc, const struct rpcif_op *op, u64 *offs, + size_t *len) +{ + rpc->smcr = 0; + rpc->smadr = 0; + rpc->enable = 0; + rpc->command = 0; + rpc->option = 0; + rpc->dummy = 0; + rpc->ddr = 0; + rpc->xferlen = 0; + + if (op->cmd.buswidth) { + rpc->enable = RPCIF_SMENR_CDE | + RPCIF_SMENR_CDB(rpcif_bit_size(op->cmd.buswidth)); + rpc->command = RPCIF_SMCMR_CMD(op->cmd.opcode); + if (op->cmd.ddr) + rpc->ddr = RPCIF_SMDRENR_HYPE(0x5); + } + if (op->ocmd.buswidth) { + rpc->enable |= RPCIF_SMENR_OCDE | + RPCIF_SMENR_OCDB(rpcif_bit_size(op->ocmd.buswidth)); + rpc->command |= RPCIF_SMCMR_OCMD(op->ocmd.opcode); + } + + if (op->addr.buswidth) { + rpc->enable |= + RPCIF_SMENR_ADB(rpcif_bit_size(op->addr.buswidth)); + if (op->addr.nbytes == 4) + rpc->enable |= RPCIF_SMENR_ADE(0xF); + else + rpc->enable |= RPCIF_SMENR_ADE(GENMASK( + 2, 3 - op->addr.nbytes)); + if (op->addr.ddr) + rpc->ddr |= RPCIF_SMDRENR_ADDRE; + + if (offs && len) + rpc->smadr = *offs; + else + rpc->smadr = op->addr.val; + } + + if (op->dummy.buswidth) { + rpc->enable |= RPCIF_SMENR_DME; + rpc->dummy = RPCIF_SMDMCR_DMCYC(op->dummy.ncycles / + op->dummy.buswidth); + } + + if (op->option.buswidth) { + rpc->enable |= RPCIF_SMENR_OPDE( + rpcif_bits_set(rpc, op->option.nbytes)) | + RPCIF_SMENR_OPDB(rpcif_bit_size(op->option.buswidth)); + if (op->option.ddr) + rpc->ddr |= RPCIF_SMDRENR_OPDRE; + rpc->option = op->option.val; + } + + rpc->dir = op->data.dir; + if (op->data.buswidth) { + u32 nbytes; + + rpc->buffer = op->data.buf.in; + switch (op->data.dir) { + case RPCIF_DATA_IN: + rpc->smcr = RPCIF_SMCR_SPIRE; + break; + case RPCIF_DATA_OUT: + rpc->smcr = RPCIF_SMCR_SPIWE; + break; + default: + break; + } + if (op->data.ddr) + rpc->ddr |= RPCIF_SMDRENR_SPIDRE; + + if (offs && len) + nbytes = *len; + else + nbytes = op->data.nbytes; + rpc->xferlen = nbytes; + + rpc->enable |= RPCIF_SMENR_SPIDE(rpcif_bits_set(rpc, nbytes)) | + RPCIF_SMENR_SPIDB(rpcif_bit_size(op->data.buswidth)); + } +} +EXPORT_SYMBOL(rpcif_prepare); + +int rpcif_manual_xfer(struct rpcif *rpc) +{ + u32 smenr, smcr, pos = 0, max = 4; + int ret = 0; + + if (rpc->bus_size == 2) + max = 8; + + pm_runtime_get_sync(rpc->dev); + + regmap_update_bits(rpc->regmap, RPCIF_PHYCNT, + RPCIF_PHYCNT_CAL, RPCIF_PHYCNT_CAL); + regmap_update_bits(rpc->regmap, RPCIF_CMNCR, + RPCIF_CMNCR_MD, RPCIF_CMNCR_MD); + regmap_write(rpc->regmap, RPCIF_SMCMR, rpc->command); + regmap_write(rpc->regmap, RPCIF_SMOPR, rpc->option); + regmap_write(rpc->regmap, RPCIF_SMDMCR, rpc->dummy); + regmap_write(rpc->regmap, RPCIF_SMDRENR, rpc->ddr); + smenr = rpc->enable; + + switch (rpc->dir) { + case RPCIF_DATA_OUT: + while (pos < rpc->xferlen) { + u32 nbytes = rpc->xferlen - pos; + u32 data[2]; + + smcr = rpc->smcr | RPCIF_SMCR_SPIE; + if (nbytes > max) { + nbytes = max; + smcr |= RPCIF_SMCR_SSLKP; + } + + memcpy(data, rpc->buffer + pos, nbytes); + if (nbytes > 4) { + regmap_write(rpc->regmap, RPCIF_SMWDR1, + data[0]); + regmap_write(rpc->regmap, RPCIF_SMWDR0, + data[1]); + } else if (nbytes > 2) { + regmap_write(rpc->regmap, RPCIF_SMWDR0, + data[0]); + } else { + regmap_write(rpc->regmap, RPCIF_SMWDR0, + data[0] << 16); + } + + regmap_write(rpc->regmap, RPCIF_SMADR, + rpc->smadr + pos); + regmap_write(rpc->regmap, RPCIF_SMENR, smenr); + regmap_write(rpc->regmap, RPCIF_SMCR, smcr); + ret = wait_msg_xfer_end(rpc); + if (ret) + goto err_out; + + pos += nbytes; + smenr = rpc->enable & + ~RPCIF_SMENR_CDE & ~RPCIF_SMENR_ADE(0xF); + } + break; + case RPCIF_DATA_IN: + /* + * RPC-IF spoils the data for the commands without an address + * phase (like RDID) in the manual mode, so we'll have to work + * around this issue by using the external address space read + * mode instead. + */ + if (!(smenr & RPCIF_SMENR_ADE(0xF)) && rpc->dirmap) { + u32 dummy; + + regmap_update_bits(rpc->regmap, RPCIF_CMNCR, + RPCIF_CMNCR_MD, 0); + regmap_write(rpc->regmap, RPCIF_DRCR, + RPCIF_DRCR_RBURST(32) | RPCIF_DRCR_RBE); + regmap_write(rpc->regmap, RPCIF_DRCMR, rpc->command); + regmap_write(rpc->regmap, RPCIF_DREAR, + RPCIF_DREAR_EAC(1)); + regmap_write(rpc->regmap, RPCIF_DROPR, rpc->option); + regmap_write(rpc->regmap, RPCIF_DRENR, + smenr & ~RPCIF_SMENR_SPIDE(0xF)); + regmap_write(rpc->regmap, RPCIF_DRDMCR, rpc->dummy); + regmap_write(rpc->regmap, RPCIF_DRDRENR, rpc->ddr); + memcpy_fromio(rpc->buffer, rpc->dirmap, rpc->xferlen); + regmap_write(rpc->regmap, RPCIF_DRCR, RPCIF_DRCR_RCF); + /* Dummy read according to spec */ + regmap_read(rpc->regmap, RPCIF_DRCR, &dummy); + break; + } + while (pos < rpc->xferlen) { + u32 nbytes = rpc->xferlen - pos; + u32 data[2]; + + if (nbytes > max) + nbytes = max; + + regmap_write(rpc->regmap, RPCIF_SMADR, + rpc->smadr + pos); + regmap_write(rpc->regmap, RPCIF_SMENR, smenr); + regmap_write(rpc->regmap, RPCIF_SMCR, + rpc->smcr | RPCIF_SMCR_SPIE); + ret = wait_msg_xfer_end(rpc); + if (ret) + goto err_out; + + if (nbytes > 4) { + regmap_read(rpc->regmap, RPCIF_SMRDR1, + &data[0]); + regmap_read(rpc->regmap, RPCIF_SMRDR0, + &data[1]); + } else if (nbytes > 2) { + regmap_read(rpc->regmap, RPCIF_SMRDR0, + &data[0]); + } else { + regmap_read(rpc->regmap, RPCIF_SMRDR0, + &data[0]); + data[0] >>= 16; + } + memcpy(rpc->buffer + pos, data, nbytes); + + pos += nbytes; + } + break; + default: + regmap_write(rpc->regmap, RPCIF_SMENR, rpc->enable); + regmap_write(rpc->regmap, RPCIF_SMCR, + rpc->smcr | RPCIF_SMCR_SPIE); + ret = wait_msg_xfer_end(rpc); + if (ret) + goto err_out; + } + +exit: + pm_runtime_put(rpc->dev); + return ret; + +err_out: + ret = reset_control_reset(rpc->rstc); + rpcif_hw_init(rpc, rpc->bus_size == 2); + goto exit; +} +EXPORT_SYMBOL(rpcif_manual_xfer); + +ssize_t rpcif_dirmap_read(struct rpcif *rpc, u64 offs, size_t len, void *buf) +{ + loff_t from = offs & (RPCIF_DIRMAP_SIZE - 1); + size_t size = RPCIF_DIRMAP_SIZE - from; + + if (len > size) + len = size; + + pm_runtime_get_sync(rpc->dev); + + regmap_update_bits(rpc->regmap, RPCIF_CMNCR, RPCIF_CMNCR_MD, 0); + regmap_write(rpc->regmap, RPCIF_DRCR, 0); + regmap_write(rpc->regmap, RPCIF_DRCMR, rpc->command); + regmap_write(rpc->regmap, RPCIF_DREAR, + RPCIF_DREAR_EAV(offs >> 25) | RPCIF_DREAR_EAC(1)); + regmap_write(rpc->regmap, RPCIF_DROPR, rpc->option); + regmap_write(rpc->regmap, RPCIF_DRENR, + rpc->enable & ~RPCIF_SMENR_SPIDE(0xF)); + regmap_write(rpc->regmap, RPCIF_DRDMCR, rpc->dummy); + regmap_write(rpc->regmap, RPCIF_DRDRENR, rpc->ddr); + + memcpy_fromio(buf, rpc->dirmap + from, len); + + pm_runtime_put(rpc->dev); + + return len; +} +EXPORT_SYMBOL(rpcif_dirmap_read); + +static int rpcif_probe(struct platform_device *pdev) +{ + struct platform_device *vdev; + struct device_node *flash; + const char *name; + + flash = of_get_next_child(pdev->dev.of_node, NULL); + if (!flash) { + dev_warn(&pdev->dev, "no flash node found\n"); + return -ENODEV; + } + + if (of_device_is_compatible(flash, "jedec,spi-nor")) { + name = "rpc-if-spi"; + } else if (of_device_is_compatible(flash, "cfi-flash")) { + name = "rpc-if-hyperflash"; + } else { + dev_warn(&pdev->dev, "unknown flash type\n"); + return -ENODEV; + } + + vdev = platform_device_alloc(name, pdev->id); + if (!vdev) + return -ENOMEM; + vdev->dev.parent = &pdev->dev; + platform_set_drvdata(pdev, vdev); + return platform_device_add(vdev); +} + +static int rpcif_remove(struct platform_device *pdev) +{ + struct platform_device *vdev = platform_get_drvdata(pdev); + + platform_device_unregister(vdev); + + return 0; +} + +static const struct of_device_id rpcif_of_match[] = { + { .compatible = "renesas,rcar-gen3-rpc-if", }, + {}, +}; +MODULE_DEVICE_TABLE(of, rpcif_of_match); + +static struct platform_driver rpcif_driver = { + .probe = rpcif_probe, + .remove = rpcif_remove, + .driver = { + .name = "rpc-if", + .of_match_table = rpcif_of_match, + }, +}; +module_platform_driver(rpcif_driver); + +MODULE_DESCRIPTION("Renesas RPC-IF core driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/mtd/spi-nor/controllers/Kconfig b/drivers/mtd/spi-nor/controllers/Kconfig index d89a5ea9446a..5c0e0ec2e6d1 100644 --- a/drivers/mtd/spi-nor/controllers/Kconfig +++ b/drivers/mtd/spi-nor/controllers/Kconfig @@ -9,17 +9,6 @@ config SPI_ASPEED_SMC and support for the SPI flash memory controller (SPI) for the host firmware. The implementation only supports SPI NOR. -config SPI_CADENCE_QUADSPI - tristate "Cadence Quad SPI controller" - depends on OF && (ARM || ARM64 || COMPILE_TEST) - help - Enable support for the Cadence Quad SPI Flash controller. - - Cadence QSPI is a specialized controller for connecting an SPI - Flash over 1/2/4-bit wide bus. Enable this option if you have a - device with a Cadence QSPI controller and want to access the - Flash as an MTD device. - config SPI_HISI_SFC tristate "Hisilicon FMC SPI NOR Flash Controller(SFC)" depends on ARCH_HISI || COMPILE_TEST diff --git a/drivers/mtd/spi-nor/controllers/Makefile b/drivers/mtd/spi-nor/controllers/Makefile index 46e6fbe586e3..e7abba491d98 100644 --- a/drivers/mtd/spi-nor/controllers/Makefile +++ b/drivers/mtd/spi-nor/controllers/Makefile @@ -1,6 +1,5 @@ # SPDX-License-Identifier: GPL-2.0 obj-$(CONFIG_SPI_ASPEED_SMC) += aspeed-smc.o -obj-$(CONFIG_SPI_CADENCE_QUADSPI) += cadence-quadspi.o obj-$(CONFIG_SPI_HISI_SFC) += hisi-sfc.o obj-$(CONFIG_SPI_NXP_SPIFI) += nxp-spifi.o obj-$(CONFIG_SPI_INTEL_SPI) += intel-spi.o diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 8f1f8fca79e3..c3008e423f59 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -59,6 +59,7 @@ comment "SPI Master Controller Drivers" config SPI_ALTERA tristate "Altera SPI Controller" + select REGMAP_MMIO help This is the driver for the Altera SPI Controller. @@ -102,7 +103,7 @@ config SPI_AT91_USART config SPI_ATMEL_QUADSPI tristate "Atmel Quad SPI Controller" - depends on ARCH_AT91 || (ARM && COMPILE_TEST && !ARCH_EBSA110) + depends on ARCH_AT91 || COMPILE_TEST depends on OF && HAS_IOMEM help This enables support for the Quad SPI controller in master mode. @@ -149,13 +150,13 @@ config SPI_BCM2835AUX config SPI_BCM63XX tristate "Broadcom BCM63xx SPI controller" - depends on BCM63XX || COMPILE_TEST + depends on BCM63XX || BMIPS_GENERIC || COMPILE_TEST help Enable support for the SPI controller on the Broadcom BCM63xx SoCs. config SPI_BCM63XX_HSSPI tristate "Broadcom BCM63XX HS SPI controller driver" - depends on BCM63XX || ARCH_BCM_63XX || COMPILE_TEST + depends on BCM63XX || BMIPS_GENERIC || ARCH_BCM_63XX || COMPILE_TEST help This enables support for the High Speed SPI controller present on newer Broadcom BCM63XX SoCs. @@ -168,7 +169,7 @@ config SPI_BCM_QSPI help Enables support for the Broadcom SPI flash and MSPI controller. Select this option for any one of BRCMSTB, iProc NSP and NS2 SoCs - based platforms. This driver works for both SPI master for spi-nor + based platforms. This driver works for both SPI master for SPI NOR flash device as well as MSPI device. config SPI_BITBANG @@ -200,6 +201,17 @@ config SPI_CADENCE This selects the Cadence SPI controller master driver used by Xilinx Zynq and ZynqMP. +config SPI_CADENCE_QUADSPI + tristate "Cadence Quad SPI controller" + depends on OF && (ARM || ARM64 || COMPILE_TEST) + help + Enable support for the Cadence Quad SPI Flash controller. + + Cadence QSPI is a specialized controller for connecting an SPI + Flash over 1/2/4-bit wide bus. Enable this option if you have a + device with a Cadence QSPI controller and want to access the + Flash as an MTD device. + config SPI_CLPS711X tristate "CLPS711X host SPI controller" depends on ARCH_CLPS711X || COMPILE_TEST @@ -299,11 +311,11 @@ config SPI_FSL_QUADSPI supports the high-level SPI memory interface. config SPI_HISI_SFC_V3XX - tristate "HiSilicon SPI-NOR Flash Controller for Hi16XX chipsets" + tristate "HiSilicon SPI NOR Flash Controller for Hi16XX chipsets" depends on (ARM64 && ACPI) || COMPILE_TEST depends on HAS_IOMEM help - This enables support for HiSilicon v3xx SPI-NOR flash controller + This enables support for HiSilicon v3xx SPI NOR flash controller found in hi16xx chipsets. config SPI_NXP_FLEXSPI @@ -465,9 +477,9 @@ config SPI_MTK_NOR depends on ARCH_MEDIATEK || COMPILE_TEST help This enables support for SPI NOR controller found on MediaTek - ARM SoCs. This is a controller specifically for SPI-NOR flash. + ARM SoCs. This is a controller specifically for SPI NOR flash. It can perform generic SPI transfers up to 6 bytes via generic - SPI interface as well as several SPI-NOR specific instructions + SPI interface as well as several SPI NOR specific instructions via SPI MEM interface. config SPI_NPCM_FIU @@ -489,11 +501,11 @@ config SPI_NPCM_PSPI config SPI_LANTIQ_SSC tristate "Lantiq SSC SPI controller" - depends on LANTIQ || COMPILE_TEST + depends on LANTIQ || X86 || COMPILE_TEST help This driver supports the Lantiq SSC SPI controller in master mode. This controller is found on Intel (former Lantiq) SoCs like - the Danube, Falcon, xRX200, xRX300. + the Danube, Falcon, xRX200, xRX300, Lightning Mountain. config SPI_OC_TINY tristate "OpenCores tiny SPI" @@ -605,6 +617,12 @@ config SPI_RB4XX help SPI controller driver for the Mikrotik RB4xx series boards. +config SPI_RPCIF + tristate "Renesas RPC-IF SPI driver" + depends on RENESAS_RPCIF + help + SPI driver for Renesas R-Car Gen3 RPC-IF. + config SPI_RSPI tristate "Renesas RSPI/QSPI controller" depends on SUPERH || ARCH_RENESAS || COMPILE_TEST diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index d2e41d3d464a..cf955ea803cd 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -31,6 +31,7 @@ obj-$(CONFIG_SPI_BCM_QSPI) += spi-iproc-qspi.o spi-brcmstb-qspi.o spi-bcm-qspi. obj-$(CONFIG_SPI_BITBANG) += spi-bitbang.o obj-$(CONFIG_SPI_BUTTERFLY) += spi-butterfly.o obj-$(CONFIG_SPI_CADENCE) += spi-cadence.o +obj-$(CONFIG_SPI_CADENCE_QUADSPI) += spi-cadence-quadspi.o obj-$(CONFIG_SPI_CLPS711X) += spi-clps711x.o obj-$(CONFIG_SPI_COLDFIRE_QSPI) += spi-coldfire-qspi.o obj-$(CONFIG_SPI_DAVINCI) += spi-davinci.o @@ -92,6 +93,7 @@ obj-$(CONFIG_SPI_QCOM_QSPI) += spi-qcom-qspi.o obj-$(CONFIG_SPI_QUP) += spi-qup.o obj-$(CONFIG_SPI_ROCKCHIP) += spi-rockchip.o obj-$(CONFIG_SPI_RB4XX) += spi-rb4xx.o +obj-$(CONFIG_SPI_RPCIF) += spi-rpc-if.o obj-$(CONFIG_SPI_RSPI) += spi-rspi.o obj-$(CONFIG_SPI_S3C24XX) += spi-s3c24xx-hw.o spi-s3c24xx-hw-y := spi-s3c24xx.o diff --git a/drivers/spi/atmel-quadspi.c b/drivers/spi/atmel-quadspi.c index cb44d1e169aa..8c009c175f2c 100644 --- a/drivers/spi/atmel-quadspi.c +++ b/drivers/spi/atmel-quadspi.c @@ -285,6 +285,12 @@ static bool atmel_qspi_supports_op(struct spi_mem *mem, op->dummy.nbytes == 0) return false; + /* DTR ops not supported. */ + if (op->cmd.dtr || op->addr.dtr || op->dummy.dtr || op->data.dtr) + return false; + if (op->cmd.nbytes != 1) + return false; + return true; } @@ -424,11 +430,11 @@ static int atmel_qspi_exec_op(struct spi_mem *mem, const struct spi_mem_op *op) /* Send/Receive data */ if (op->data.dir == SPI_MEM_DATA_IN) - _memcpy_fromio(op->data.buf.in, aq->mem + offset, - op->data.nbytes); + memcpy_fromio(op->data.buf.in, aq->mem + offset, + op->data.nbytes); else - _memcpy_toio(aq->mem + offset, op->data.buf.out, - op->data.nbytes); + memcpy_toio(aq->mem + offset, op->data.buf.out, + op->data.nbytes); /* Release the chip-select */ atmel_qspi_write(QSPI_CR_LASTXFER, aq, QSPI_CR); diff --git a/drivers/spi/spi-altera.c b/drivers/spi/spi-altera.c index 41d71ba7fd32..809bfff3690a 100644 --- a/drivers/spi/spi-altera.c +++ b/drivers/spi/spi-altera.c @@ -14,6 +14,7 @@ #include <linux/errno.h> #include <linux/module.h> #include <linux/platform_device.h> +#include <linux/spi/altera.h> #include <linux/spi/spi.h> #include <linux/io.h> #include <linux/of.h> @@ -40,19 +41,61 @@ #define ALTERA_SPI_CONTROL_IE_MSK 0x100 #define ALTERA_SPI_CONTROL_SSO_MSK 0x400 +#define ALTERA_SPI_MAX_CS 32 + +enum altera_spi_type { + ALTERA_SPI_TYPE_UNKNOWN, + ALTERA_SPI_TYPE_SUBDEV, +}; + struct altera_spi { - void __iomem *base; int irq; int len; int count; int bytes_per_word; - unsigned long imr; + u32 imr; /* data buffers */ const unsigned char *tx; unsigned char *rx; + + struct regmap *regmap; + u32 regoff; + struct device *dev; +}; + +static const struct regmap_config spi_altera_config = { + .reg_bits = 32, + .reg_stride = 4, + .val_bits = 32, + .fast_io = true, }; +static int altr_spi_writel(struct altera_spi *hw, unsigned int reg, + unsigned int val) +{ + int ret; + + ret = regmap_write(hw->regmap, hw->regoff + reg, val); + if (ret) + dev_err(hw->dev, "fail to write reg 0x%x val 0x%x: %d\n", + reg, val, ret); + + return ret; +} + +static int altr_spi_readl(struct altera_spi *hw, unsigned int reg, + unsigned int *val) +{ + int ret; + + ret = regmap_read(hw->regmap, hw->regoff + reg, val); + if (ret) + dev_err(hw->dev, "fail to read reg 0x%x: %d\n", reg, ret); + + return ret; +} + static inline struct altera_spi *altera_spi_to_hw(struct spi_device *sdev) { return spi_master_get_devdata(sdev->master); @@ -64,12 +107,13 @@ static void altera_spi_set_cs(struct spi_device *spi, bool is_high) if (is_high) { hw->imr &= ~ALTERA_SPI_CONTROL_SSO_MSK; - writel(hw->imr, hw->base + ALTERA_SPI_CONTROL); - writel(0, hw->base + ALTERA_SPI_SLAVE_SEL); + altr_spi_writel(hw, ALTERA_SPI_CONTROL, hw->imr); + altr_spi_writel(hw, ALTERA_SPI_SLAVE_SEL, 0); } else { - writel(BIT(spi->chip_select), hw->base + ALTERA_SPI_SLAVE_SEL); + altr_spi_writel(hw, ALTERA_SPI_SLAVE_SEL, + BIT(spi->chip_select)); hw->imr |= ALTERA_SPI_CONTROL_SSO_MSK; - writel(hw->imr, hw->base + ALTERA_SPI_CONTROL); + altr_spi_writel(hw, ALTERA_SPI_CONTROL, hw->imr); } } @@ -86,17 +130,24 @@ static void altera_spi_tx_word(struct altera_spi *hw) txd = (hw->tx[hw->count * 2] | (hw->tx[hw->count * 2 + 1] << 8)); break; + case 4: + txd = (hw->tx[hw->count * 4] + | (hw->tx[hw->count * 4 + 1] << 8) + | (hw->tx[hw->count * 4 + 2] << 16) + | (hw->tx[hw->count * 4 + 3] << 24)); + break; + } } - writel(txd, hw->base + ALTERA_SPI_TXDATA); + altr_spi_writel(hw, ALTERA_SPI_TXDATA, txd); } static void altera_spi_rx_word(struct altera_spi *hw) { unsigned int rxd; - rxd = readl(hw->base + ALTERA_SPI_RXDATA); + altr_spi_readl(hw, ALTERA_SPI_RXDATA, &rxd); if (hw->rx) { switch (hw->bytes_per_word) { case 1: @@ -106,6 +157,13 @@ static void altera_spi_rx_word(struct altera_spi *hw) hw->rx[hw->count * 2] = rxd; hw->rx[hw->count * 2 + 1] = rxd >> 8; break; + case 4: + hw->rx[hw->count * 4] = rxd; + hw->rx[hw->count * 4 + 1] = rxd >> 8; + hw->rx[hw->count * 4 + 2] = rxd >> 16; + hw->rx[hw->count * 4 + 3] = rxd >> 24; + break; + } } @@ -116,6 +174,7 @@ static int altera_spi_txrx(struct spi_master *master, struct spi_device *spi, struct spi_transfer *t) { struct altera_spi *hw = spi_master_get_devdata(master); + u32 val; hw->tx = t->tx_buf; hw->rx = t->rx_buf; @@ -126,7 +185,7 @@ static int altera_spi_txrx(struct spi_master *master, if (hw->irq >= 0) { /* enable receive interrupt */ hw->imr |= ALTERA_SPI_CONTROL_IRRDY_MSK; - writel(hw->imr, hw->base + ALTERA_SPI_CONTROL); + altr_spi_writel(hw, ALTERA_SPI_CONTROL, hw->imr); /* send the first byte */ altera_spi_tx_word(hw); @@ -134,9 +193,13 @@ static int altera_spi_txrx(struct spi_master *master, while (hw->count < hw->len) { altera_spi_tx_word(hw); - while (!(readl(hw->base + ALTERA_SPI_STATUS) & - ALTERA_SPI_STATUS_RRDY_MSK)) + for (;;) { + altr_spi_readl(hw, ALTERA_SPI_STATUS, &val); + if (val & ALTERA_SPI_STATUS_RRDY_MSK) + break; + cpu_relax(); + } altera_spi_rx_word(hw); } @@ -158,7 +221,7 @@ static irqreturn_t altera_spi_irq(int irq, void *dev) } else { /* disable receive interrupt */ hw->imr &= ~ALTERA_SPI_CONTROL_IRRDY_MSK; - writel(hw->imr, hw->base + ALTERA_SPI_CONTROL); + altr_spi_writel(hw, ALTERA_SPI_CONTROL, hw->imr); spi_finalize_current_transfer(master); } @@ -168,9 +231,14 @@ static irqreturn_t altera_spi_irq(int irq, void *dev) static int altera_spi_probe(struct platform_device *pdev) { + const struct platform_device_id *platid = platform_get_device_id(pdev); + struct altera_spi_platform_data *pdata = dev_get_platdata(&pdev->dev); + enum altera_spi_type type = ALTERA_SPI_TYPE_UNKNOWN; struct altera_spi *hw; struct spi_master *master; int err = -ENODEV; + u32 val; + u16 i; master = spi_alloc_master(&pdev->dev, sizeof(struct altera_spi)); if (!master) @@ -178,27 +246,72 @@ static int altera_spi_probe(struct platform_device *pdev) /* setup the master state. */ master->bus_num = pdev->id; - master->num_chipselect = 16; - master->mode_bits = SPI_CS_HIGH; - master->bits_per_word_mask = SPI_BPW_RANGE_MASK(1, 16); + + if (pdata) { + if (pdata->num_chipselect > ALTERA_SPI_MAX_CS) { + dev_err(&pdev->dev, + "Invalid number of chipselect: %hu\n", + pdata->num_chipselect); + return -EINVAL; + } + + master->num_chipselect = pdata->num_chipselect; + master->mode_bits = pdata->mode_bits; + master->bits_per_word_mask = pdata->bits_per_word_mask; + } else { + master->num_chipselect = 16; + master->mode_bits = SPI_CS_HIGH; + master->bits_per_word_mask = SPI_BPW_RANGE_MASK(1, 16); + } + master->dev.of_node = pdev->dev.of_node; master->transfer_one = altera_spi_txrx; master->set_cs = altera_spi_set_cs; hw = spi_master_get_devdata(master); + hw->dev = &pdev->dev; + + if (platid) + type = platid->driver_data; /* find and map our resources */ - hw->base = devm_platform_ioremap_resource(pdev, 0); - if (IS_ERR(hw->base)) { - err = PTR_ERR(hw->base); - goto exit; + if (type == ALTERA_SPI_TYPE_SUBDEV) { + struct resource *regoff; + + hw->regmap = dev_get_regmap(pdev->dev.parent, NULL); + if (!hw->regmap) { + dev_err(&pdev->dev, "get regmap failed\n"); + goto exit; + } + + regoff = platform_get_resource(pdev, IORESOURCE_REG, 0); + if (regoff) + hw->regoff = regoff->start; + } else { + void __iomem *res; + + res = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(res)) { + err = PTR_ERR(res); + goto exit; + } + + hw->regmap = devm_regmap_init_mmio(&pdev->dev, res, + &spi_altera_config); + if (IS_ERR(hw->regmap)) { + dev_err(&pdev->dev, "regmap mmio init failed\n"); + err = PTR_ERR(hw->regmap); + goto exit; + } } + /* program defaults into the registers */ hw->imr = 0; /* disable spi interrupts */ - writel(hw->imr, hw->base + ALTERA_SPI_CONTROL); - writel(0, hw->base + ALTERA_SPI_STATUS); /* clear status reg */ - if (readl(hw->base + ALTERA_SPI_STATUS) & ALTERA_SPI_STATUS_RRDY_MSK) - readl(hw->base + ALTERA_SPI_RXDATA); /* flush rxdata */ + altr_spi_writel(hw, ALTERA_SPI_CONTROL, hw->imr); + altr_spi_writel(hw, ALTERA_SPI_STATUS, 0); /* clear status reg */ + altr_spi_readl(hw, ALTERA_SPI_STATUS, &val); + if (val & ALTERA_SPI_STATUS_RRDY_MSK) + altr_spi_readl(hw, ALTERA_SPI_RXDATA, &val); /* flush rxdata */ /* irq is optional */ hw->irq = platform_get_irq(pdev, 0); if (hw->irq >= 0) { @@ -211,7 +324,17 @@ static int altera_spi_probe(struct platform_device *pdev) err = devm_spi_register_master(&pdev->dev, master); if (err) goto exit; - dev_info(&pdev->dev, "base %p, irq %d\n", hw->base, hw->irq); + + if (pdata) { + for (i = 0; i < pdata->num_devices; i++) { + if (!spi_new_device(master, pdata->devices + i)) + dev_warn(&pdev->dev, + "unable to create SPI device: %s\n", + pdata->devices[i].modalias); + } + } + + dev_info(&pdev->dev, "regoff %u, irq %d\n", hw->regoff, hw->irq); return 0; exit: @@ -228,6 +351,13 @@ static const struct of_device_id altera_spi_match[] = { MODULE_DEVICE_TABLE(of, altera_spi_match); #endif /* CONFIG_OF */ +static const struct platform_device_id altera_spi_ids[] = { + { DRV_NAME, ALTERA_SPI_TYPE_UNKNOWN }, + { "subdev_spi_altera", ALTERA_SPI_TYPE_SUBDEV }, + { } +}; +MODULE_DEVICE_TABLE(platform, altera_spi_ids); + static struct platform_driver altera_spi_driver = { .probe = altera_spi_probe, .driver = { @@ -235,6 +365,7 @@ static struct platform_driver altera_spi_driver = { .pm = NULL, .of_match_table = of_match_ptr(altera_spi_match), }, + .id_table = altera_spi_ids, }; module_platform_driver(altera_spi_driver); diff --git a/drivers/spi/spi-amd.c b/drivers/spi/spi-amd.c index d0aacd4de1b9..7f629544060d 100644 --- a/drivers/spi/spi-amd.c +++ b/drivers/spi/spi-amd.c @@ -294,11 +294,13 @@ err_free_master: return err; } +#ifdef CONFIG_ACPI static const struct acpi_device_id spi_acpi_match[] = { { "AMDI0061", 0 }, {}, }; MODULE_DEVICE_TABLE(acpi, spi_acpi_match); +#endif static struct platform_driver amd_spi_driver = { .driver = { diff --git a/drivers/spi/spi-at91-usart.c b/drivers/spi/spi-at91-usart.c index 88033422a42a..8c8352625d23 100644 --- a/drivers/spi/spi-at91-usart.c +++ b/drivers/spi/spi-at91-usart.c @@ -681,13 +681,6 @@ static const struct dev_pm_ops at91_usart_spi_pm_ops = { at91_usart_spi_runtime_resume, NULL) }; -static const struct of_device_id at91_usart_spi_dt_ids[] = { - { .compatible = "microchip,at91sam9g45-usart-spi"}, - { /* sentinel */} -}; - -MODULE_DEVICE_TABLE(of, at91_usart_spi_dt_ids); - static struct platform_driver at91_usart_spi_driver = { .driver = { .name = "at91_usart_spi", diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c index 57ee8c3b7972..2cfe6253a784 100644 --- a/drivers/spi/spi-atmel.c +++ b/drivers/spi/spi-atmel.c @@ -1546,10 +1546,9 @@ static int atmel_spi_probe(struct platform_device *pdev) return PTR_ERR(clk); /* setup spi core then atmel-specific driver state */ - ret = -ENOMEM; master = spi_alloc_master(&pdev->dev, sizeof(*as)); if (!master) - goto out_free; + return -ENOMEM; /* the spi->mode bits understood by this driver: */ master->use_gpio_descriptors = true; @@ -1678,7 +1677,6 @@ out_free_dma: clk_disable_unprepare(clk); out_free_irq: out_unmap_regs: -out_free: spi_master_put(master); return ret; } diff --git a/drivers/spi/spi-bcm2835.c b/drivers/spi/spi-bcm2835.c index 237bd306c268..c45d76c848c8 100644 --- a/drivers/spi/spi-bcm2835.c +++ b/drivers/spi/spi-bcm2835.c @@ -86,6 +86,7 @@ MODULE_PARM_DESC(polling_limit_us, * @clk: core clock, divided to calculate serial clock * @irq: interrupt, signals TX FIFO empty or RX FIFO ¾ full * @tfr: SPI transfer currently processed + * @ctlr: SPI controller reverse lookup * @tx_buf: pointer whence next transmitted byte is read * @rx_buf: pointer where next received byte is written * @tx_len: remaining bytes to transmit @@ -125,6 +126,7 @@ struct bcm2835_spi { struct clk *clk; int irq; struct spi_transfer *tfr; + struct spi_controller *ctlr; const u8 *tx_buf; u8 *rx_buf; int tx_len; @@ -243,13 +245,13 @@ static inline void bcm2835_rd_fifo_count(struct bcm2835_spi *bs, int count) bs->rx_len -= count; - while (count > 0) { + do { val = bcm2835_rd(bs, BCM2835_SPI_FIFO); len = min(count, 4); memcpy(bs->rx_buf, &val, len); bs->rx_buf += len; count -= 4; - } + } while (count > 0); } /** @@ -269,7 +271,7 @@ static inline void bcm2835_wr_fifo_count(struct bcm2835_spi *bs, int count) bs->tx_len -= count; - while (count > 0) { + do { if (bs->tx_buf) { len = min(count, 4); memcpy(&val, bs->tx_buf, len); @@ -279,7 +281,7 @@ static inline void bcm2835_wr_fifo_count(struct bcm2835_spi *bs, int count) } bcm2835_wr(bs, BCM2835_SPI_FIFO, val); count -= 4; - } + } while (count > 0); } /** @@ -308,12 +310,11 @@ static inline void bcm2835_rd_fifo_blind(struct bcm2835_spi *bs, int count) count = min(count, bs->rx_len); bs->rx_len -= count; - while (count) { + do { val = bcm2835_rd(bs, BCM2835_SPI_FIFO); if (bs->rx_buf) *bs->rx_buf++ = val; - count--; - } + } while (--count); } /** @@ -328,16 +329,14 @@ static inline void bcm2835_wr_fifo_blind(struct bcm2835_spi *bs, int count) count = min(count, bs->tx_len); bs->tx_len -= count; - while (count) { + do { val = bs->tx_buf ? *bs->tx_buf++ : 0; bcm2835_wr(bs, BCM2835_SPI_FIFO, val); - count--; - } + } while (--count); } -static void bcm2835_spi_reset_hw(struct spi_controller *ctlr) +static void bcm2835_spi_reset_hw(struct bcm2835_spi *bs) { - struct bcm2835_spi *bs = spi_controller_get_devdata(ctlr); u32 cs = bcm2835_rd(bs, BCM2835_SPI_CS); /* Disable SPI interrupts and transfer */ @@ -363,8 +362,7 @@ static void bcm2835_spi_reset_hw(struct spi_controller *ctlr) static irqreturn_t bcm2835_spi_interrupt(int irq, void *dev_id) { - struct spi_controller *ctlr = dev_id; - struct bcm2835_spi *bs = spi_controller_get_devdata(ctlr); + struct bcm2835_spi *bs = dev_id; u32 cs = bcm2835_rd(bs, BCM2835_SPI_CS); /* @@ -386,9 +384,9 @@ static irqreturn_t bcm2835_spi_interrupt(int irq, void *dev_id) if (!bs->rx_len) { /* Transfer complete - reset SPI HW */ - bcm2835_spi_reset_hw(ctlr); + bcm2835_spi_reset_hw(bs); /* wake up the framework */ - complete(&ctlr->xfer_completion); + complete(&bs->ctlr->xfer_completion); } return IRQ_HANDLED; @@ -607,7 +605,7 @@ static void bcm2835_spi_dma_rx_done(void *data) bcm2835_spi_undo_prologue(bs); /* reset fifo and HW */ - bcm2835_spi_reset_hw(ctlr); + bcm2835_spi_reset_hw(bs); /* and mark as completed */; complete(&ctlr->xfer_completion); @@ -641,7 +639,7 @@ static void bcm2835_spi_dma_tx_done(void *data) dmaengine_terminate_async(ctlr->dma_rx); bcm2835_spi_undo_prologue(bs); - bcm2835_spi_reset_hw(ctlr); + bcm2835_spi_reset_hw(bs); complete(&ctlr->xfer_completion); } @@ -825,14 +823,14 @@ static int bcm2835_spi_transfer_one_dma(struct spi_controller *ctlr, if (!bs->rx_buf && !bs->tx_dma_active && cmpxchg(&bs->rx_dma_active, true, false)) { dmaengine_terminate_async(ctlr->dma_rx); - bcm2835_spi_reset_hw(ctlr); + bcm2835_spi_reset_hw(bs); } /* wait for wakeup in framework */ return 1; err_reset_hw: - bcm2835_spi_reset_hw(ctlr); + bcm2835_spi_reset_hw(bs); bcm2835_spi_undo_prologue(bs); return ret; } @@ -1074,7 +1072,7 @@ static int bcm2835_spi_transfer_one_poll(struct spi_controller *ctlr, } /* Transfer complete - reset SPI HW */ - bcm2835_spi_reset_hw(ctlr); + bcm2835_spi_reset_hw(bs); /* and return without waiting for completion */ return 0; } @@ -1084,7 +1082,7 @@ static int bcm2835_spi_transfer_one(struct spi_controller *ctlr, struct spi_transfer *tfr) { struct bcm2835_spi *bs = spi_controller_get_devdata(ctlr); - unsigned long spi_hz, clk_hz, cdiv, spi_used_hz; + unsigned long spi_hz, clk_hz, cdiv; unsigned long hz_per_byte, byte_limit; u32 cs = bs->prepare_cs[spi->chip_select]; @@ -1104,7 +1102,7 @@ static int bcm2835_spi_transfer_one(struct spi_controller *ctlr, } else { cdiv = 0; /* 0 is the slowest we can go */ } - spi_used_hz = cdiv ? (clk_hz / cdiv) : (clk_hz / 65536); + tfr->effective_speed_hz = cdiv ? (clk_hz / cdiv) : (clk_hz / 65536); bcm2835_wr(bs, BCM2835_SPI_CLK, cdiv); /* handle all the 3-wire mode */ @@ -1124,7 +1122,7 @@ static int bcm2835_spi_transfer_one(struct spi_controller *ctlr, * per 300,000 Hz of bus clock. */ hz_per_byte = polling_limit_us ? (9 * 1000000) / polling_limit_us : 0; - byte_limit = hz_per_byte ? spi_used_hz / hz_per_byte : 1; + byte_limit = hz_per_byte ? tfr->effective_speed_hz / hz_per_byte : 1; /* run in polling mode for short transfers */ if (tfr->len < byte_limit) @@ -1182,7 +1180,7 @@ static void bcm2835_spi_handle_err(struct spi_controller *ctlr, bcm2835_spi_undo_prologue(bs); /* and reset */ - bcm2835_spi_reset_hw(ctlr); + bcm2835_spi_reset_hw(bs); } static int chip_match_name(struct gpio_chip *chip, void *data) @@ -1311,6 +1309,7 @@ static int bcm2835_spi_probe(struct platform_device *pdev) ctlr->dev.of_node = pdev->dev.of_node; bs = spi_controller_get_devdata(ctlr); + bs->ctlr = ctlr; bs->regs = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(bs->regs)) { @@ -1345,7 +1344,7 @@ static int bcm2835_spi_probe(struct platform_device *pdev) BCM2835_SPI_CS_CLEAR_RX | BCM2835_SPI_CS_CLEAR_TX); err = devm_request_irq(&pdev->dev, bs->irq, bcm2835_spi_interrupt, 0, - dev_name(&pdev->dev), ctlr); + dev_name(&pdev->dev), bs); if (err) { dev_err(&pdev->dev, "could not request IRQ: %d\n", err); goto out_dma_release; diff --git a/drivers/spi/spi-bcm2835aux.c b/drivers/spi/spi-bcm2835aux.c index c331efd6e86b..2f717812c766 100644 --- a/drivers/spi/spi-bcm2835aux.c +++ b/drivers/spi/spi-bcm2835aux.c @@ -345,7 +345,7 @@ static int bcm2835aux_spi_transfer_one(struct spi_master *master, struct spi_transfer *tfr) { struct bcm2835aux_spi *bs = spi_master_get_devdata(master); - unsigned long spi_hz, clk_hz, speed, spi_used_hz; + unsigned long spi_hz, clk_hz, speed; unsigned long hz_per_byte, byte_limit; /* calculate the registers to handle @@ -374,7 +374,7 @@ static int bcm2835aux_spi_transfer_one(struct spi_master *master, /* set the new speed */ bs->cntl[0] |= speed << BCM2835_AUX_SPI_CNTL0_SPEED_SHIFT; - spi_used_hz = clk_hz / (2 * (speed + 1)); + tfr->effective_speed_hz = clk_hz / (2 * (speed + 1)); /* set transmit buffers and length */ bs->tx_buf = tfr->tx_buf; @@ -391,7 +391,7 @@ static int bcm2835aux_spi_transfer_one(struct spi_master *master, * 30 µs per 300,000 Hz of bus clock. */ hz_per_byte = polling_limit_us ? (9 * 1000000) / polling_limit_us : 0; - byte_limit = hz_per_byte ? spi_used_hz / hz_per_byte : 1; + byte_limit = hz_per_byte ? tfr->effective_speed_hz / hz_per_byte : 1; /* run in polling mode for short transfers */ if (tfr->len < byte_limit) diff --git a/drivers/spi/spi-bcm63xx-hsspi.c b/drivers/spi/spi-bcm63xx-hsspi.c index 6c235306c0e4..9909b18f3c5a 100644 --- a/drivers/spi/spi-bcm63xx-hsspi.c +++ b/drivers/spi/spi-bcm63xx-hsspi.c @@ -20,6 +20,7 @@ #include <linux/spi/spi.h> #include <linux/mutex.h> #include <linux/of.h> +#include <linux/reset.h> #define HSSPI_GLOBAL_CTRL_REG 0x0 #define GLOBAL_CTRL_CS_POLARITY_SHIFT 0 @@ -334,6 +335,7 @@ static int bcm63xx_hsspi_probe(struct platform_device *pdev) struct clk *clk, *pll_clk = NULL; int irq, ret; u32 reg, rate, num_cs = HSSPI_SPI_MAX_CS; + struct reset_control *reset; irq = platform_get_irq(pdev, 0); if (irq < 0) @@ -348,10 +350,20 @@ static int bcm63xx_hsspi_probe(struct platform_device *pdev) if (IS_ERR(clk)) return PTR_ERR(clk); + reset = devm_reset_control_get_optional_exclusive(dev, NULL); + if (IS_ERR(reset)) + return PTR_ERR(reset); + ret = clk_prepare_enable(clk); if (ret) return ret; + ret = reset_control_reset(reset); + if (ret) { + dev_err(dev, "unable to reset device: %d\n", ret); + goto out_disable_clk; + } + rate = clk_get_rate(clk); if (!rate) { pll_clk = devm_clk_get(dev, "pll"); diff --git a/drivers/spi/spi-bcm63xx.c b/drivers/spi/spi-bcm63xx.c index 0f1b10a4ef0c..96d075e633f4 100644 --- a/drivers/spi/spi-bcm63xx.c +++ b/drivers/spi/spi-bcm63xx.c @@ -18,6 +18,7 @@ #include <linux/err.h> #include <linux/pm_runtime.h> #include <linux/of.h> +#include <linux/reset.h> /* BCM 6338/6348 SPI core */ #define SPI_6348_RSET_SIZE 64 @@ -493,6 +494,7 @@ static int bcm63xx_spi_probe(struct platform_device *pdev) struct bcm63xx_spi *bs; int ret; u32 num_cs = BCM63XX_SPI_MAX_CS; + struct reset_control *reset; if (dev->of_node) { const struct of_device_id *match; @@ -529,6 +531,10 @@ static int bcm63xx_spi_probe(struct platform_device *pdev) return PTR_ERR(clk); } + reset = devm_reset_control_get_optional_exclusive(dev, NULL); + if (IS_ERR(reset)) + return PTR_ERR(reset); + master = spi_alloc_master(dev, sizeof(*bs)); if (!master) { dev_err(dev, "out of memory\n"); @@ -579,6 +585,12 @@ static int bcm63xx_spi_probe(struct platform_device *pdev) if (ret) goto out_err; + ret = reset_control_reset(reset); + if (ret) { + dev_err(dev, "unable to reset device: %d\n", ret); + goto out_clk_disable; + } + bcm_spi_writeb(bs, SPI_INTR_CLEAR_ALL, SPI_INT_STATUS); /* register and we are done */ diff --git a/drivers/spi/spi-bitbang.c b/drivers/spi/spi-bitbang.c index 68491a8bf7b5..1a7352abd878 100644 --- a/drivers/spi/spi-bitbang.c +++ b/drivers/spi/spi-bitbang.c @@ -174,7 +174,7 @@ int spi_bitbang_setup_transfer(struct spi_device *spi, struct spi_transfer *t) } EXPORT_SYMBOL_GPL(spi_bitbang_setup_transfer); -/** +/* * spi_bitbang_setup - default setup for per-word I/O loops */ int spi_bitbang_setup(struct spi_device *spi) @@ -208,7 +208,7 @@ int spi_bitbang_setup(struct spi_device *spi) } EXPORT_SYMBOL_GPL(spi_bitbang_setup); -/** +/* * spi_bitbang_cleanup - default cleanup for per-word I/O loops */ void spi_bitbang_cleanup(struct spi_device *spi) @@ -427,7 +427,7 @@ int spi_bitbang_start(struct spi_bitbang *bitbang) } EXPORT_SYMBOL_GPL(spi_bitbang_start); -/** +/* * spi_bitbang_stop - stops the task providing spi communication */ void spi_bitbang_stop(struct spi_bitbang *bitbang) diff --git a/drivers/mtd/spi-nor/controllers/cadence-quadspi.c b/drivers/spi/spi-cadence-quadspi.c index 494dcab4aaaa..1c1a9d17eec0 100644 --- a/drivers/mtd/spi-nor/controllers/cadence-quadspi.c +++ b/drivers/spi/spi-cadence-quadspi.c @@ -1,9 +1,11 @@ // SPDX-License-Identifier: GPL-2.0-only -/* - * Driver for Cadence QSPI Controller - * - * Copyright Altera Corporation (C) 2012-2014. All rights reserved. - */ +// +// Driver for Cadence QSPI Controller +// +// Copyright Altera Corporation (C) 2012-2014. All rights reserved. +// Copyright Intel Corporation (C) 2019-2020. All rights reserved. +// Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com + #include <linux/clk.h> #include <linux/completion.h> #include <linux/delay.h> @@ -17,9 +19,6 @@ #include <linux/jiffies.h> #include <linux/kernel.h> #include <linux/module.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/mtd/spi-nor.h> #include <linux/of_device.h> #include <linux/of.h> #include <linux/platform_device.h> @@ -27,6 +26,7 @@ #include <linux/reset.h> #include <linux/sched.h> #include <linux/spi/spi.h> +#include <linux/spi/spi-mem.h> #include <linux/timer.h> #define CQSPI_NAME "cadence-qspi" @@ -34,17 +34,14 @@ /* Quirks */ #define CQSPI_NEEDS_WR_DELAY BIT(0) +#define CQSPI_DISABLE_DAC_MODE BIT(1) -/* Capabilities mask */ -#define CQSPI_BASE_HWCAPS_MASK \ - (SNOR_HWCAPS_READ | SNOR_HWCAPS_READ_FAST | \ - SNOR_HWCAPS_READ_1_1_2 | SNOR_HWCAPS_READ_1_1_4 | \ - SNOR_HWCAPS_PP) +/* Capabilities */ +#define CQSPI_SUPPORTS_OCTAL BIT(0) struct cqspi_st; struct cqspi_flash_pdata { - struct spi_nor nor; struct cqspi_st *cqspi; u32 clk_rate; u32 read_delay; @@ -56,8 +53,6 @@ struct cqspi_flash_pdata { u8 addr_width; u8 data_width; u8 cs; - bool registered; - bool use_direct_mode; }; struct cqspi_st { @@ -70,16 +65,12 @@ struct cqspi_st { void __iomem *ahb_base; resource_size_t ahb_size; struct completion transfer_complete; - struct mutex bus_mutex; struct dma_chan *rx_chan; struct completion rx_dma_complete; dma_addr_t mmap_phys_base; int current_cs; - int current_page_size; - int current_erase_size; - int current_addr_width; unsigned long master_ref_clk_hz; bool is_decoded_cs; u32 fifo_depth; @@ -87,6 +78,7 @@ struct cqspi_st { bool rclk_en; u32 trigger_address; u32 wr_delay; + bool use_direct_mode; struct cqspi_flash_pdata f_pdata[CQSPI_MAX_CHIPSELECT]; }; @@ -285,9 +277,8 @@ static irqreturn_t cqspi_irq_handler(int this_irq, void *dev) return IRQ_HANDLED; } -static unsigned int cqspi_calc_rdreg(struct spi_nor *nor) +static unsigned int cqspi_calc_rdreg(struct cqspi_flash_pdata *f_pdata) { - struct cqspi_flash_pdata *f_pdata = nor->priv; u32 rdreg = 0; rdreg |= f_pdata->inst_width << CQSPI_REG_RD_INSTR_TYPE_INSTR_LSB; @@ -354,19 +345,21 @@ static int cqspi_exec_flash_cmd(struct cqspi_st *cqspi, unsigned int reg) return cqspi_wait_idle(cqspi); } -static int cqspi_command_read(struct spi_nor *nor, u8 opcode, - u8 *rxbuf, size_t n_rx) +static int cqspi_command_read(struct cqspi_flash_pdata *f_pdata, + const struct spi_mem_op *op) { - struct cqspi_flash_pdata *f_pdata = nor->priv; struct cqspi_st *cqspi = f_pdata->cqspi; void __iomem *reg_base = cqspi->iobase; + u8 *rxbuf = op->data.buf.in; + u8 opcode = op->cmd.opcode; + size_t n_rx = op->data.nbytes; unsigned int rdreg; unsigned int reg; size_t read_len; int status; if (!n_rx || n_rx > CQSPI_STIG_DATA_LEN_MAX || !rxbuf) { - dev_err(nor->dev, + dev_err(&cqspi->pdev->dev, "Invalid input argument, len %zu rxbuf 0x%p\n", n_rx, rxbuf); return -EINVAL; @@ -374,7 +367,7 @@ static int cqspi_command_read(struct spi_nor *nor, u8 opcode, reg = opcode << CQSPI_REG_CMDCTRL_OPCODE_LSB; - rdreg = cqspi_calc_rdreg(nor); + rdreg = cqspi_calc_rdreg(f_pdata); writel(rdreg, reg_base + CQSPI_REG_RD_INSTR); reg |= (0x1 << CQSPI_REG_CMDCTRL_RD_EN_LSB); @@ -403,25 +396,36 @@ static int cqspi_command_read(struct spi_nor *nor, u8 opcode, return 0; } -static int cqspi_command_write(struct spi_nor *nor, const u8 opcode, - const u8 *txbuf, size_t n_tx) +static int cqspi_command_write(struct cqspi_flash_pdata *f_pdata, + const struct spi_mem_op *op) { - struct cqspi_flash_pdata *f_pdata = nor->priv; struct cqspi_st *cqspi = f_pdata->cqspi; void __iomem *reg_base = cqspi->iobase; + const u8 opcode = op->cmd.opcode; + const u8 *txbuf = op->data.buf.out; + size_t n_tx = op->data.nbytes; unsigned int reg; unsigned int data; size_t write_len; - int ret; if (n_tx > CQSPI_STIG_DATA_LEN_MAX || (n_tx && !txbuf)) { - dev_err(nor->dev, + dev_err(&cqspi->pdev->dev, "Invalid input argument, cmdlen %zu txbuf 0x%p\n", n_tx, txbuf); return -EINVAL; } reg = opcode << CQSPI_REG_CMDCTRL_OPCODE_LSB; + + if (op->addr.nbytes) { + reg |= (0x1 << CQSPI_REG_CMDCTRL_ADDR_EN_LSB); + reg |= ((op->addr.nbytes - 1) & + CQSPI_REG_CMDCTRL_ADD_BYTES_MASK) + << CQSPI_REG_CMDCTRL_ADD_BYTES_LSB; + + writel(op->addr.val, reg_base + CQSPI_REG_CMDADDRESS); + } + if (n_tx) { reg |= (0x1 << CQSPI_REG_CMDCTRL_WR_EN_LSB); reg |= ((n_tx - 1) & CQSPI_REG_CMDCTRL_WR_BYTES_MASK) @@ -439,73 +443,46 @@ static int cqspi_command_write(struct spi_nor *nor, const u8 opcode, writel(data, reg_base + CQSPI_REG_CMDWRITEDATAUPPER); } } - ret = cqspi_exec_flash_cmd(cqspi, reg); - return ret; -} - -static int cqspi_command_write_addr(struct spi_nor *nor, - const u8 opcode, const unsigned int addr) -{ - struct cqspi_flash_pdata *f_pdata = nor->priv; - struct cqspi_st *cqspi = f_pdata->cqspi; - void __iomem *reg_base = cqspi->iobase; - unsigned int reg; - - reg = opcode << CQSPI_REG_CMDCTRL_OPCODE_LSB; - reg |= (0x1 << CQSPI_REG_CMDCTRL_ADDR_EN_LSB); - reg |= ((nor->addr_width - 1) & CQSPI_REG_CMDCTRL_ADD_BYTES_MASK) - << CQSPI_REG_CMDCTRL_ADD_BYTES_LSB; - - writel(addr, reg_base + CQSPI_REG_CMDADDRESS); return cqspi_exec_flash_cmd(cqspi, reg); } -static int cqspi_read_setup(struct spi_nor *nor) +static int cqspi_read_setup(struct cqspi_flash_pdata *f_pdata, + const struct spi_mem_op *op) { - struct cqspi_flash_pdata *f_pdata = nor->priv; struct cqspi_st *cqspi = f_pdata->cqspi; void __iomem *reg_base = cqspi->iobase; unsigned int dummy_clk = 0; unsigned int reg; - reg = nor->read_opcode << CQSPI_REG_RD_INSTR_OPCODE_LSB; - reg |= cqspi_calc_rdreg(nor); + reg = op->cmd.opcode << CQSPI_REG_RD_INSTR_OPCODE_LSB; + reg |= cqspi_calc_rdreg(f_pdata); /* Setup dummy clock cycles */ - dummy_clk = nor->read_dummy; + dummy_clk = op->dummy.nbytes * 8; if (dummy_clk > CQSPI_DUMMY_CLKS_MAX) dummy_clk = CQSPI_DUMMY_CLKS_MAX; - if (dummy_clk / 8) { - reg |= (1 << CQSPI_REG_RD_INSTR_MODE_EN_LSB); - /* Set mode bits high to ensure chip doesn't enter XIP */ - writel(0xFF, reg_base + CQSPI_REG_MODE_BIT); - - /* Need to subtract the mode byte (8 clocks). */ - if (f_pdata->inst_width != CQSPI_INST_TYPE_QUAD) - dummy_clk -= 8; - - if (dummy_clk) - reg |= (dummy_clk & CQSPI_REG_RD_INSTR_DUMMY_MASK) - << CQSPI_REG_RD_INSTR_DUMMY_LSB; - } + if (dummy_clk) + reg |= (dummy_clk & CQSPI_REG_RD_INSTR_DUMMY_MASK) + << CQSPI_REG_RD_INSTR_DUMMY_LSB; writel(reg, reg_base + CQSPI_REG_RD_INSTR); /* Set address width */ reg = readl(reg_base + CQSPI_REG_SIZE); reg &= ~CQSPI_REG_SIZE_ADDRESS_MASK; - reg |= (nor->addr_width - 1); + reg |= (op->addr.nbytes - 1); writel(reg, reg_base + CQSPI_REG_SIZE); return 0; } -static int cqspi_indirect_read_execute(struct spi_nor *nor, u8 *rxbuf, - loff_t from_addr, const size_t n_rx) +static int cqspi_indirect_read_execute(struct cqspi_flash_pdata *f_pdata, + u8 *rxbuf, loff_t from_addr, + const size_t n_rx) { - struct cqspi_flash_pdata *f_pdata = nor->priv; struct cqspi_st *cqspi = f_pdata->cqspi; + struct device *dev = &cqspi->pdev->dev; void __iomem *reg_base = cqspi->iobase; void __iomem *ahb_base = cqspi->ahb_base; unsigned int remaining = n_rx; @@ -528,13 +505,13 @@ static int cqspi_indirect_read_execute(struct spi_nor *nor, u8 *rxbuf, while (remaining > 0) { if (!wait_for_completion_timeout(&cqspi->transfer_complete, - msecs_to_jiffies(CQSPI_READ_TIMEOUT_MS))) + msecs_to_jiffies(CQSPI_READ_TIMEOUT_MS))) ret = -ETIMEDOUT; bytes_to_read = cqspi_get_rd_sram_level(cqspi); if (ret && bytes_to_read == 0) { - dev_err(nor->dev, "Indirect read timeout, no bytes\n"); + dev_err(dev, "Indirect read timeout, no bytes\n"); goto failrd; } @@ -570,8 +547,7 @@ static int cqspi_indirect_read_execute(struct spi_nor *nor, u8 *rxbuf, ret = cqspi_wait_for_bit(reg_base + CQSPI_REG_INDIRECTRD, CQSPI_REG_INDIRECTRD_DONE_MASK, 0); if (ret) { - dev_err(nor->dev, - "Indirect read completion error (%i)\n", ret); + dev_err(dev, "Indirect read completion error (%i)\n", ret); goto failrd; } @@ -593,32 +569,32 @@ failrd: return ret; } -static int cqspi_write_setup(struct spi_nor *nor) +static int cqspi_write_setup(struct cqspi_flash_pdata *f_pdata, + const struct spi_mem_op *op) { unsigned int reg; - struct cqspi_flash_pdata *f_pdata = nor->priv; struct cqspi_st *cqspi = f_pdata->cqspi; void __iomem *reg_base = cqspi->iobase; /* Set opcode. */ - reg = nor->program_opcode << CQSPI_REG_WR_INSTR_OPCODE_LSB; + reg = op->cmd.opcode << CQSPI_REG_WR_INSTR_OPCODE_LSB; writel(reg, reg_base + CQSPI_REG_WR_INSTR); - reg = cqspi_calc_rdreg(nor); + reg = cqspi_calc_rdreg(f_pdata); writel(reg, reg_base + CQSPI_REG_RD_INSTR); reg = readl(reg_base + CQSPI_REG_SIZE); reg &= ~CQSPI_REG_SIZE_ADDRESS_MASK; - reg |= (nor->addr_width - 1); + reg |= (op->addr.nbytes - 1); writel(reg, reg_base + CQSPI_REG_SIZE); return 0; } -static int cqspi_indirect_write_execute(struct spi_nor *nor, loff_t to_addr, - const u8 *txbuf, const size_t n_tx) +static int cqspi_indirect_write_execute(struct cqspi_flash_pdata *f_pdata, + loff_t to_addr, const u8 *txbuf, + const size_t n_tx) { - const unsigned int page_size = nor->page_size; - struct cqspi_flash_pdata *f_pdata = nor->priv; struct cqspi_st *cqspi = f_pdata->cqspi; + struct device *dev = &cqspi->pdev->dev; void __iomem *reg_base = cqspi->iobase; unsigned int remaining = n_tx; unsigned int write_bytes; @@ -648,7 +624,7 @@ static int cqspi_indirect_write_execute(struct spi_nor *nor, loff_t to_addr, while (remaining > 0) { size_t write_words, mod_bytes; - write_bytes = remaining > page_size ? page_size : remaining; + write_bytes = remaining; write_words = write_bytes / 4; mod_bytes = write_bytes % 4; /* Write 4 bytes at a time then single bytes. */ @@ -665,8 +641,8 @@ static int cqspi_indirect_write_execute(struct spi_nor *nor, loff_t to_addr, } if (!wait_for_completion_timeout(&cqspi->transfer_complete, - msecs_to_jiffies(CQSPI_TIMEOUT_MS))) { - dev_err(nor->dev, "Indirect write timeout\n"); + msecs_to_jiffies(CQSPI_TIMEOUT_MS))) { + dev_err(dev, "Indirect write timeout\n"); ret = -ETIMEDOUT; goto failwr; } @@ -681,8 +657,7 @@ static int cqspi_indirect_write_execute(struct spi_nor *nor, loff_t to_addr, ret = cqspi_wait_for_bit(reg_base + CQSPI_REG_INDIRECTWR, CQSPI_REG_INDIRECTWR_DONE_MASK, 0); if (ret) { - dev_err(nor->dev, - "Indirect write completion error (%i)\n", ret); + dev_err(dev, "Indirect write completion error (%i)\n", ret); goto failwr; } @@ -706,9 +681,8 @@ failwr: return ret; } -static void cqspi_chipselect(struct spi_nor *nor) +static void cqspi_chipselect(struct cqspi_flash_pdata *f_pdata) { - struct cqspi_flash_pdata *f_pdata = nor->priv; struct cqspi_st *cqspi = f_pdata->cqspi; void __iomem *reg_base = cqspi->iobase; unsigned int chip_select = f_pdata->cs; @@ -736,32 +710,6 @@ static void cqspi_chipselect(struct spi_nor *nor) writel(reg, reg_base + CQSPI_REG_CONFIG); } -static void cqspi_configure_cs_and_sizes(struct spi_nor *nor) -{ - struct cqspi_flash_pdata *f_pdata = nor->priv; - struct cqspi_st *cqspi = f_pdata->cqspi; - void __iomem *iobase = cqspi->iobase; - unsigned int reg; - - /* configure page size and block size. */ - reg = readl(iobase + CQSPI_REG_SIZE); - reg &= ~(CQSPI_REG_SIZE_PAGE_MASK << CQSPI_REG_SIZE_PAGE_LSB); - reg &= ~(CQSPI_REG_SIZE_BLOCK_MASK << CQSPI_REG_SIZE_BLOCK_LSB); - reg &= ~CQSPI_REG_SIZE_ADDRESS_MASK; - reg |= (nor->page_size << CQSPI_REG_SIZE_PAGE_LSB); - reg |= (ilog2(nor->mtd.erasesize) << CQSPI_REG_SIZE_BLOCK_LSB); - reg |= (nor->addr_width - 1); - writel(reg, iobase + CQSPI_REG_SIZE); - - /* configure the chip select */ - cqspi_chipselect(nor); - - /* Store the new configuration of the controller */ - cqspi->current_page_size = nor->page_size; - cqspi->current_erase_size = nor->mtd.erasesize; - cqspi->current_addr_width = nor->addr_width; -} - static unsigned int calculate_ticks_for_ns(const unsigned int ref_clk_hz, const unsigned int ns_val) { @@ -773,9 +721,8 @@ static unsigned int calculate_ticks_for_ns(const unsigned int ref_clk_hz, return ticks; } -static void cqspi_delay(struct spi_nor *nor) +static void cqspi_delay(struct cqspi_flash_pdata *f_pdata) { - struct cqspi_flash_pdata *f_pdata = nor->priv; struct cqspi_st *cqspi = f_pdata->cqspi; void __iomem *iobase = cqspi->iobase; const unsigned int ref_clk_hz = cqspi->master_ref_clk_hz; @@ -859,33 +806,27 @@ static void cqspi_controller_enable(struct cqspi_st *cqspi, bool enable) writel(reg, reg_base + CQSPI_REG_CONFIG); } -static void cqspi_configure(struct spi_nor *nor) +static void cqspi_configure(struct cqspi_flash_pdata *f_pdata, + unsigned long sclk) { - struct cqspi_flash_pdata *f_pdata = nor->priv; struct cqspi_st *cqspi = f_pdata->cqspi; - const unsigned int sclk = f_pdata->clk_rate; int switch_cs = (cqspi->current_cs != f_pdata->cs); int switch_ck = (cqspi->sclk != sclk); - if ((cqspi->current_page_size != nor->page_size) || - (cqspi->current_erase_size != nor->mtd.erasesize) || - (cqspi->current_addr_width != nor->addr_width)) - switch_cs = 1; - if (switch_cs || switch_ck) cqspi_controller_enable(cqspi, 0); /* Switch chip select. */ if (switch_cs) { cqspi->current_cs = f_pdata->cs; - cqspi_configure_cs_and_sizes(nor); + cqspi_chipselect(f_pdata); } /* Setup baudrate divisor and delays */ if (switch_ck) { cqspi->sclk = sclk; cqspi_config_baudrate_div(cqspi); - cqspi_delay(nor); + cqspi_delay(f_pdata); cqspi_readdata_capture(cqspi, !cqspi->rclk_en, f_pdata->read_delay); } @@ -894,26 +835,25 @@ static void cqspi_configure(struct spi_nor *nor) cqspi_controller_enable(cqspi, 1); } -static int cqspi_set_protocol(struct spi_nor *nor, const int read) +static int cqspi_set_protocol(struct cqspi_flash_pdata *f_pdata, + const struct spi_mem_op *op) { - struct cqspi_flash_pdata *f_pdata = nor->priv; - f_pdata->inst_width = CQSPI_INST_TYPE_SINGLE; f_pdata->addr_width = CQSPI_INST_TYPE_SINGLE; f_pdata->data_width = CQSPI_INST_TYPE_SINGLE; - if (read) { - switch (nor->read_proto) { - case SNOR_PROTO_1_1_1: + if (op->data.dir == SPI_MEM_DATA_IN) { + switch (op->data.buswidth) { + case 1: f_pdata->data_width = CQSPI_INST_TYPE_SINGLE; break; - case SNOR_PROTO_1_1_2: + case 2: f_pdata->data_width = CQSPI_INST_TYPE_DUAL; break; - case SNOR_PROTO_1_1_4: + case 4: f_pdata->data_width = CQSPI_INST_TYPE_QUAD; break; - case SNOR_PROTO_1_1_8: + case 8: f_pdata->data_width = CQSPI_INST_TYPE_OCTAL; break; default: @@ -921,36 +861,32 @@ static int cqspi_set_protocol(struct spi_nor *nor, const int read) } } - cqspi_configure(nor); - return 0; } -static ssize_t cqspi_write(struct spi_nor *nor, loff_t to, - size_t len, const u_char *buf) +static ssize_t cqspi_write(struct cqspi_flash_pdata *f_pdata, + const struct spi_mem_op *op) { - struct cqspi_flash_pdata *f_pdata = nor->priv; struct cqspi_st *cqspi = f_pdata->cqspi; + loff_t to = op->addr.val; + size_t len = op->data.nbytes; + const u_char *buf = op->data.buf.out; int ret; - ret = cqspi_set_protocol(nor, 0); + ret = cqspi_set_protocol(f_pdata, op); if (ret) return ret; - ret = cqspi_write_setup(nor); + ret = cqspi_write_setup(f_pdata, op); if (ret) return ret; - if (f_pdata->use_direct_mode) { + if (cqspi->use_direct_mode && ((to + len) <= cqspi->ahb_size)) { memcpy_toio(cqspi->ahb_base + to, buf, len); - ret = cqspi_wait_idle(cqspi); - } else { - ret = cqspi_indirect_write_execute(nor, to, buf, len); + return cqspi_wait_idle(cqspi); } - if (ret) - return ret; - return len; + return cqspi_indirect_write_execute(f_pdata, to, buf, len); } static void cqspi_rx_dma_callback(void *param) @@ -960,11 +896,11 @@ static void cqspi_rx_dma_callback(void *param) complete(&cqspi->rx_dma_complete); } -static int cqspi_direct_read_execute(struct spi_nor *nor, u_char *buf, - loff_t from, size_t len) +static int cqspi_direct_read_execute(struct cqspi_flash_pdata *f_pdata, + u_char *buf, loff_t from, size_t len) { - struct cqspi_flash_pdata *f_pdata = nor->priv; struct cqspi_st *cqspi = f_pdata->cqspi; + struct device *dev = &cqspi->pdev->dev; enum dma_ctrl_flags flags = DMA_CTRL_ACK | DMA_PREP_INTERRUPT; dma_addr_t dma_src = (dma_addr_t)cqspi->mmap_phys_base + from; int ret = 0; @@ -977,15 +913,15 @@ static int cqspi_direct_read_execute(struct spi_nor *nor, u_char *buf, return 0; } - dma_dst = dma_map_single(nor->dev, buf, len, DMA_FROM_DEVICE); - if (dma_mapping_error(nor->dev, dma_dst)) { - dev_err(nor->dev, "dma mapping failed\n"); + dma_dst = dma_map_single(dev, buf, len, DMA_FROM_DEVICE); + if (dma_mapping_error(dev, dma_dst)) { + dev_err(dev, "dma mapping failed\n"); return -ENOMEM; } tx = dmaengine_prep_dma_memcpy(cqspi->rx_chan, dma_dst, dma_src, len, flags); if (!tx) { - dev_err(nor->dev, "device_prep_dma_memcpy error\n"); + dev_err(dev, "device_prep_dma_memcpy error\n"); ret = -EIO; goto err_unmap; } @@ -997,7 +933,7 @@ static int cqspi_direct_read_execute(struct spi_nor *nor, u_char *buf, ret = dma_submit_error(cookie); if (ret) { - dev_err(nor->dev, "dma_submit_error %d\n", cookie); + dev_err(dev, "dma_submit_error %d\n", cookie); ret = -EIO; goto err_unmap; } @@ -1006,99 +942,68 @@ static int cqspi_direct_read_execute(struct spi_nor *nor, u_char *buf, if (!wait_for_completion_timeout(&cqspi->rx_dma_complete, msecs_to_jiffies(len))) { dmaengine_terminate_sync(cqspi->rx_chan); - dev_err(nor->dev, "DMA wait_for_completion_timeout\n"); + dev_err(dev, "DMA wait_for_completion_timeout\n"); ret = -ETIMEDOUT; goto err_unmap; } err_unmap: - dma_unmap_single(nor->dev, dma_dst, len, DMA_FROM_DEVICE); + dma_unmap_single(dev, dma_dst, len, DMA_FROM_DEVICE); return ret; } -static ssize_t cqspi_read(struct spi_nor *nor, loff_t from, - size_t len, u_char *buf) -{ - struct cqspi_flash_pdata *f_pdata = nor->priv; - int ret; - - ret = cqspi_set_protocol(nor, 1); - if (ret) - return ret; - - ret = cqspi_read_setup(nor); - if (ret) - return ret; - - if (f_pdata->use_direct_mode) - ret = cqspi_direct_read_execute(nor, buf, from, len); - else - ret = cqspi_indirect_read_execute(nor, buf, from, len); - if (ret) - return ret; - - return len; -} - -static int cqspi_erase(struct spi_nor *nor, loff_t offs) +static ssize_t cqspi_read(struct cqspi_flash_pdata *f_pdata, + const struct spi_mem_op *op) { + struct cqspi_st *cqspi = f_pdata->cqspi; + loff_t from = op->addr.val; + size_t len = op->data.nbytes; + u_char *buf = op->data.buf.in; int ret; - ret = cqspi_set_protocol(nor, 0); + ret = cqspi_set_protocol(f_pdata, op); if (ret) return ret; - /* Send write enable, then erase commands. */ - ret = nor->controller_ops->write_reg(nor, SPINOR_OP_WREN, NULL, 0); + ret = cqspi_read_setup(f_pdata, op); if (ret) return ret; - /* Set up command buffer. */ - ret = cqspi_command_write_addr(nor, nor->erase_opcode, offs); - if (ret) - return ret; + if (cqspi->use_direct_mode && ((from + len) <= cqspi->ahb_size)) + return cqspi_direct_read_execute(f_pdata, buf, from, len); - return 0; + return cqspi_indirect_read_execute(f_pdata, buf, from, len); } -static int cqspi_prep(struct spi_nor *nor) +static int cqspi_mem_process(struct spi_mem *mem, const struct spi_mem_op *op) { - struct cqspi_flash_pdata *f_pdata = nor->priv; - struct cqspi_st *cqspi = f_pdata->cqspi; - - mutex_lock(&cqspi->bus_mutex); - - return 0; -} + struct cqspi_st *cqspi = spi_master_get_devdata(mem->spi->master); + struct cqspi_flash_pdata *f_pdata; -static void cqspi_unprep(struct spi_nor *nor) -{ - struct cqspi_flash_pdata *f_pdata = nor->priv; - struct cqspi_st *cqspi = f_pdata->cqspi; + f_pdata = &cqspi->f_pdata[mem->spi->chip_select]; + cqspi_configure(f_pdata, mem->spi->max_speed_hz); - mutex_unlock(&cqspi->bus_mutex); -} + if (op->data.dir == SPI_MEM_DATA_IN && op->data.buf.in) { + if (!op->addr.nbytes) + return cqspi_command_read(f_pdata, op); -static int cqspi_read_reg(struct spi_nor *nor, u8 opcode, u8 *buf, size_t len) -{ - int ret; + return cqspi_read(f_pdata, op); + } - ret = cqspi_set_protocol(nor, 0); - if (!ret) - ret = cqspi_command_read(nor, opcode, buf, len); + if (!op->addr.nbytes || !op->data.buf.out) + return cqspi_command_write(f_pdata, op); - return ret; + return cqspi_write(f_pdata, op); } -static int cqspi_write_reg(struct spi_nor *nor, u8 opcode, const u8 *buf, - size_t len) +static int cqspi_exec_mem_op(struct spi_mem *mem, const struct spi_mem_op *op) { int ret; - ret = cqspi_set_protocol(nor, 0); - if (!ret) - ret = cqspi_command_write(nor, opcode, buf, len); + ret = cqspi_mem_process(mem, op); + if (ret) + dev_err(&mem->spi->dev, "operation failed with %d\n", ret); return ret; } @@ -1140,26 +1045,26 @@ static int cqspi_of_get_flash_pdata(struct platform_device *pdev, return 0; } -static int cqspi_of_get_pdata(struct platform_device *pdev) +static int cqspi_of_get_pdata(struct cqspi_st *cqspi) { - struct device_node *np = pdev->dev.of_node; - struct cqspi_st *cqspi = platform_get_drvdata(pdev); + struct device *dev = &cqspi->pdev->dev; + struct device_node *np = dev->of_node; cqspi->is_decoded_cs = of_property_read_bool(np, "cdns,is-decoded-cs"); if (of_property_read_u32(np, "cdns,fifo-depth", &cqspi->fifo_depth)) { - dev_err(&pdev->dev, "couldn't determine fifo-depth\n"); + dev_err(dev, "couldn't determine fifo-depth\n"); return -ENXIO; } if (of_property_read_u32(np, "cdns,fifo-width", &cqspi->fifo_width)) { - dev_err(&pdev->dev, "couldn't determine fifo-width\n"); + dev_err(dev, "couldn't determine fifo-width\n"); return -ENXIO; } if (of_property_read_u32(np, "cdns,trigger-address", &cqspi->trigger_address)) { - dev_err(&pdev->dev, "couldn't determine trigger-address\n"); + dev_err(dev, "couldn't determine trigger-address\n"); return -ENXIO; } @@ -1202,7 +1107,7 @@ static void cqspi_controller_init(struct cqspi_st *cqspi) cqspi_controller_enable(cqspi, 1); } -static void cqspi_request_mmap_dma(struct cqspi_st *cqspi) +static int cqspi_request_mmap_dma(struct cqspi_st *cqspi) { dma_cap_mask_t mask; @@ -1211,53 +1116,42 @@ static void cqspi_request_mmap_dma(struct cqspi_st *cqspi) cqspi->rx_chan = dma_request_chan_by_mask(&mask); if (IS_ERR(cqspi->rx_chan)) { - dev_err(&cqspi->pdev->dev, "No Rx DMA available\n"); + int ret = PTR_ERR(cqspi->rx_chan); + + if (ret != -EPROBE_DEFER) + dev_err(&cqspi->pdev->dev, "No Rx DMA available\n"); cqspi->rx_chan = NULL; + return ret; } init_completion(&cqspi->rx_dma_complete); + + return 0; } -static const struct spi_nor_controller_ops cqspi_controller_ops = { - .prepare = cqspi_prep, - .unprepare = cqspi_unprep, - .read_reg = cqspi_read_reg, - .write_reg = cqspi_write_reg, - .read = cqspi_read, - .write = cqspi_write, - .erase = cqspi_erase, +static const struct spi_controller_mem_ops cqspi_mem_ops = { + .exec_op = cqspi_exec_mem_op, }; -static int cqspi_setup_flash(struct cqspi_st *cqspi, struct device_node *np) +static int cqspi_setup_flash(struct cqspi_st *cqspi) { struct platform_device *pdev = cqspi->pdev; struct device *dev = &pdev->dev; - const struct cqspi_driver_platdata *ddata; - struct spi_nor_hwcaps hwcaps; + struct device_node *np = dev->of_node; struct cqspi_flash_pdata *f_pdata; - struct spi_nor *nor; - struct mtd_info *mtd; unsigned int cs; - int i, ret; - - ddata = of_device_get_match_data(dev); - if (!ddata) { - dev_err(dev, "Couldn't find driver data\n"); - return -EINVAL; - } - hwcaps.mask = ddata->hwcaps_mask; + int ret; /* Get flash device data */ for_each_available_child_of_node(dev->of_node, np) { ret = of_property_read_u32(np, "reg", &cs); if (ret) { dev_err(dev, "Couldn't determine chip select.\n"); - goto err; + return ret; } if (cs >= CQSPI_MAX_CHIPSELECT) { - ret = -EINVAL; dev_err(dev, "Chip select %d out of range.\n", cs); - goto err; + return -EINVAL; } f_pdata = &cqspi->f_pdata[cs]; @@ -1266,86 +1160,51 @@ static int cqspi_setup_flash(struct cqspi_st *cqspi, struct device_node *np) ret = cqspi_of_get_flash_pdata(pdev, f_pdata, np); if (ret) - goto err; - - nor = &f_pdata->nor; - mtd = &nor->mtd; - - mtd->priv = nor; - - nor->dev = dev; - spi_nor_set_flash_node(nor, np); - nor->priv = f_pdata; - nor->controller_ops = &cqspi_controller_ops; - - mtd->name = devm_kasprintf(dev, GFP_KERNEL, "%s.%d", - dev_name(dev), cs); - if (!mtd->name) { - ret = -ENOMEM; - goto err; - } - - ret = spi_nor_scan(nor, NULL, &hwcaps); - if (ret) - goto err; - - ret = mtd_device_register(mtd, NULL, 0); - if (ret) - goto err; - - f_pdata->registered = true; - - if (mtd->size <= cqspi->ahb_size) { - f_pdata->use_direct_mode = true; - dev_dbg(nor->dev, "using direct mode for %s\n", - mtd->name); - - if (!cqspi->rx_chan) - cqspi_request_mmap_dma(cqspi); - } + return ret; } return 0; - -err: - for (i = 0; i < CQSPI_MAX_CHIPSELECT; i++) - if (cqspi->f_pdata[i].registered) - mtd_device_unregister(&cqspi->f_pdata[i].nor.mtd); - return ret; } static int cqspi_probe(struct platform_device *pdev) { - struct device_node *np = pdev->dev.of_node; + const struct cqspi_driver_platdata *ddata; + struct reset_control *rstc, *rstc_ocp; struct device *dev = &pdev->dev; + struct spi_master *master; + struct resource *res_ahb; struct cqspi_st *cqspi; struct resource *res; - struct resource *res_ahb; - struct reset_control *rstc, *rstc_ocp; - const struct cqspi_driver_platdata *ddata; int ret; int irq; - cqspi = devm_kzalloc(dev, sizeof(*cqspi), GFP_KERNEL); - if (!cqspi) + master = spi_alloc_master(&pdev->dev, sizeof(*cqspi)); + if (!master) { + dev_err(&pdev->dev, "spi_alloc_master failed\n"); return -ENOMEM; + } + master->mode_bits = SPI_RX_QUAD | SPI_RX_DUAL; + master->mem_ops = &cqspi_mem_ops; + master->dev.of_node = pdev->dev.of_node; + + cqspi = spi_master_get_devdata(master); - mutex_init(&cqspi->bus_mutex); cqspi->pdev = pdev; - platform_set_drvdata(pdev, cqspi); /* Obtain configuration from OF. */ - ret = cqspi_of_get_pdata(pdev); + ret = cqspi_of_get_pdata(cqspi); if (ret) { dev_err(dev, "Cannot get mandatory OF data.\n"); - return -ENODEV; + ret = -ENODEV; + goto probe_master_put; } /* Obtain QSPI clock. */ cqspi->clk = devm_clk_get(dev, NULL); if (IS_ERR(cqspi->clk)) { dev_err(dev, "Cannot claim QSPI clock.\n"); - return PTR_ERR(cqspi->clk); + ret = PTR_ERR(cqspi->clk); + goto probe_master_put; } /* Obtain and remap controller address. */ @@ -1353,7 +1212,8 @@ static int cqspi_probe(struct platform_device *pdev) cqspi->iobase = devm_ioremap_resource(dev, res); if (IS_ERR(cqspi->iobase)) { dev_err(dev, "Cannot remap controller address.\n"); - return PTR_ERR(cqspi->iobase); + ret = PTR_ERR(cqspi->iobase); + goto probe_master_put; } /* Obtain and remap AHB address. */ @@ -1361,7 +1221,8 @@ static int cqspi_probe(struct platform_device *pdev) cqspi->ahb_base = devm_ioremap_resource(dev, res_ahb); if (IS_ERR(cqspi->ahb_base)) { dev_err(dev, "Cannot remap AHB address.\n"); - return PTR_ERR(cqspi->ahb_base); + ret = PTR_ERR(cqspi->ahb_base); + goto probe_master_put; } cqspi->mmap_phys_base = (dma_addr_t)res_ahb->start; cqspi->ahb_size = resource_size(res_ahb); @@ -1370,14 +1231,16 @@ static int cqspi_probe(struct platform_device *pdev) /* Obtain IRQ line. */ irq = platform_get_irq(pdev, 0); - if (irq < 0) - return -ENXIO; + if (irq < 0) { + ret = -ENXIO; + goto probe_master_put; + } pm_runtime_enable(dev); ret = pm_runtime_get_sync(dev); if (ret < 0) { pm_runtime_put_noidle(dev); - return ret; + goto probe_master_put; } ret = clk_prepare_enable(cqspi->clk); @@ -1390,13 +1253,13 @@ static int cqspi_probe(struct platform_device *pdev) rstc = devm_reset_control_get_optional_exclusive(dev, "qspi"); if (IS_ERR(rstc)) { dev_err(dev, "Cannot get QSPI reset.\n"); - return PTR_ERR(rstc); + goto probe_reset_failed; } rstc_ocp = devm_reset_control_get_optional_exclusive(dev, "qspi-ocp"); if (IS_ERR(rstc_ocp)) { dev_err(dev, "Cannot get QSPI OCP reset.\n"); - return PTR_ERR(rstc_ocp); + goto probe_reset_failed; } reset_control_assert(rstc); @@ -1407,15 +1270,21 @@ static int cqspi_probe(struct platform_device *pdev) cqspi->master_ref_clk_hz = clk_get_rate(cqspi->clk); ddata = of_device_get_match_data(dev); - if (ddata && (ddata->quirks & CQSPI_NEEDS_WR_DELAY)) - cqspi->wr_delay = 5 * DIV_ROUND_UP(NSEC_PER_SEC, - cqspi->master_ref_clk_hz); + if (ddata) { + if (ddata->quirks & CQSPI_NEEDS_WR_DELAY) + cqspi->wr_delay = 5 * DIV_ROUND_UP(NSEC_PER_SEC, + cqspi->master_ref_clk_hz); + if (ddata->hwcaps_mask & CQSPI_SUPPORTS_OCTAL) + master->mode_bits |= SPI_RX_OCTAL; + if (!(ddata->quirks & CQSPI_DISABLE_DAC_MODE)) + cqspi->use_direct_mode = true; + } ret = devm_request_irq(dev, irq, cqspi_irq_handler, 0, pdev->name, cqspi); if (ret) { dev_err(dev, "Cannot request IRQ.\n"); - goto probe_irq_failed; + goto probe_reset_failed; } cqspi_wait_idle(cqspi); @@ -1423,31 +1292,40 @@ static int cqspi_probe(struct platform_device *pdev) cqspi->current_cs = -1; cqspi->sclk = 0; - ret = cqspi_setup_flash(cqspi, np); + ret = cqspi_setup_flash(cqspi); if (ret) { - dev_err(dev, "Cadence QSPI NOR probe failed %d\n", ret); + dev_err(dev, "failed to setup flash parameters %d\n", ret); goto probe_setup_failed; } - return ret; + if (cqspi->use_direct_mode) { + ret = cqspi_request_mmap_dma(cqspi); + if (ret == -EPROBE_DEFER) + goto probe_setup_failed; + } + + ret = devm_spi_register_master(dev, master); + if (ret) { + dev_err(&pdev->dev, "failed to register SPI ctlr %d\n", ret); + goto probe_setup_failed; + } + + return 0; probe_setup_failed: cqspi_controller_enable(cqspi, 0); -probe_irq_failed: +probe_reset_failed: clk_disable_unprepare(cqspi->clk); probe_clk_failed: pm_runtime_put_sync(dev); pm_runtime_disable(dev); +probe_master_put: + spi_master_put(master); return ret; } static int cqspi_remove(struct platform_device *pdev) { struct cqspi_st *cqspi = platform_get_drvdata(pdev); - int i; - - for (i = 0; i < CQSPI_MAX_CHIPSELECT; i++) - if (cqspi->f_pdata[i].registered) - mtd_device_unregister(&cqspi->f_pdata[i].nor.mtd); cqspi_controller_enable(cqspi, 0); @@ -1490,16 +1368,15 @@ static const struct dev_pm_ops cqspi__dev_pm_ops = { #endif static const struct cqspi_driver_platdata cdns_qspi = { - .hwcaps_mask = CQSPI_BASE_HWCAPS_MASK, + .quirks = CQSPI_DISABLE_DAC_MODE, }; static const struct cqspi_driver_platdata k2g_qspi = { - .hwcaps_mask = CQSPI_BASE_HWCAPS_MASK, .quirks = CQSPI_NEEDS_WR_DELAY, }; static const struct cqspi_driver_platdata am654_ospi = { - .hwcaps_mask = CQSPI_BASE_HWCAPS_MASK | SNOR_HWCAPS_READ_1_1_8, + .hwcaps_mask = CQSPI_SUPPORTS_OCTAL, .quirks = CQSPI_NEEDS_WR_DELAY, }; @@ -1538,3 +1415,5 @@ MODULE_LICENSE("GPL v2"); MODULE_ALIAS("platform:" CQSPI_NAME); MODULE_AUTHOR("Ley Foon Tan <lftan@altera.com>"); MODULE_AUTHOR("Graham Moore <grmoore@opensource.altera.com>"); +MODULE_AUTHOR("Vadivel Murugan R <vadivel.muruganx.ramuthevar@intel.com>"); +MODULE_AUTHOR("Vignesh Raghavendra <vigneshr@ti.com>"); diff --git a/drivers/spi/spi-cadence.c b/drivers/spi/spi-cadence.c index 82a0ee09cbe1..2b6b9c1ad9d0 100644 --- a/drivers/spi/spi-cadence.c +++ b/drivers/spi/spi-cadence.c @@ -556,7 +556,7 @@ static int cdns_spi_probe(struct platform_device *pdev) master->unprepare_transfer_hardware = cdns_unprepare_transfer_hardware; master->set_cs = cdns_spi_chipselect; master->auto_runtime_pm = true; - master->mode_bits = SPI_CPOL | SPI_CPHA; + master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH; /* Set to default valid value */ master->max_speed_hz = clk_get_rate(xspi->ref_clk) / 4; diff --git a/drivers/spi/spi-cavium-thunderx.c b/drivers/spi/spi-cavium-thunderx.c index fd6b9caffaf0..60c0d6934654 100644 --- a/drivers/spi/spi-cavium-thunderx.c +++ b/drivers/spi/spi-cavium-thunderx.c @@ -64,6 +64,7 @@ static int thunderx_spi_probe(struct pci_dev *pdev, p->sys_freq = SYS_FREQ_DEFAULT; dev_info(dev, "Set system clock to %u\n", p->sys_freq); + master->flags = SPI_MASTER_HALF_DUPLEX; master->num_chipselect = 4; master->mode_bits = SPI_CPHA | SPI_CPOL | SPI_CS_HIGH | SPI_LSB_FIRST | SPI_3WIRE; diff --git a/drivers/spi/spi-coldfire-qspi.c b/drivers/spi/spi-coldfire-qspi.c index f80e06c87fbe..8996115ce736 100644 --- a/drivers/spi/spi-coldfire-qspi.c +++ b/drivers/spi/spi-coldfire-qspi.c @@ -387,7 +387,7 @@ static int mcfqspi_probe(struct platform_device *pdev) status = PTR_ERR(mcfqspi->clk); goto fail0; } - clk_enable(mcfqspi->clk); + clk_prepare_enable(mcfqspi->clk); master->bus_num = pdata->bus_num; master->num_chipselect = pdata->num_chipselect; @@ -425,7 +425,7 @@ fail2: pm_runtime_disable(&pdev->dev); mcfqspi_cs_teardown(mcfqspi); fail1: - clk_disable(mcfqspi->clk); + clk_disable_unprepare(mcfqspi->clk); fail0: spi_master_put(master); diff --git a/drivers/spi/spi-davinci.c b/drivers/spi/spi-davinci.c index f71c497393a6..c329a27c16ac 100644 --- a/drivers/spi/spi-davinci.c +++ b/drivers/spi/spi-davinci.c @@ -236,7 +236,8 @@ static void davinci_spi_chipselect(struct spi_device *spi, int value) /** * davinci_spi_get_prescale - Calculates the correct prescale value - * @maxspeed_hz: the maximum rate the SPI clock can run at + * @dspi: the controller data + * @max_speed_hz: the maximum rate the SPI clock can run at * * This function calculates the prescale value that generates a clock rate * less than or equal to the specified maximum. @@ -711,7 +712,7 @@ err_desc: /** * dummy_thread_fn - dummy thread function * @irq: IRQ number for this SPI Master - * @context_data: structure for SPI Master controller davinci_spi + * @data: structure for SPI Master controller davinci_spi * * This is to satisfy the request_threaded_irq() API so that the irq * handler is called in interrupt context. @@ -724,7 +725,7 @@ static irqreturn_t dummy_thread_fn(s32 irq, void *data) /** * davinci_spi_irq - Interrupt handler for SPI Master Controller * @irq: IRQ number for this SPI Master - * @context_data: structure for SPI Master controller davinci_spi + * @data: structure for SPI Master controller davinci_spi * * ISR will determine that interrupt arrives either for READ or WRITE command. * According to command it will do the appropriate action. It will check diff --git a/drivers/spi/spi-ep93xx.c b/drivers/spi/spi-ep93xx.c index 8c854b187b1d..aa676559d273 100644 --- a/drivers/spi/spi-ep93xx.c +++ b/drivers/spi/spi-ep93xx.c @@ -10,7 +10,7 @@ * * For more information about the SPI controller see documentation on Cirrus * Logic web site: - * http://www.cirrus.com/en/pubs/manual/EP93xx_Users_Guide_UM1.pdf + * https://www.cirrus.com/en/pubs/manual/EP93xx_Users_Guide_UM1.pdf */ #include <linux/io.h> @@ -214,7 +214,7 @@ static void ep93xx_do_read(struct spi_master *master) /** * ep93xx_spi_read_write() - perform next RX/TX transfer - * @espi: ep93xx SPI controller struct + * @master: SPI master * * This function transfers next bytes (or half-words) to/from RX/TX FIFOs. If * called several times, the whole transfer will be completed. Returns diff --git a/drivers/spi/spi-fsl-lpspi.c b/drivers/spi/spi-fsl-lpspi.c index 1552b28b9515..85a5c952389a 100644 --- a/drivers/spi/spi-fsl-lpspi.c +++ b/drivers/spi/spi-fsl-lpspi.c @@ -11,7 +11,6 @@ #include <linux/dmaengine.h> #include <linux/dma-mapping.h> #include <linux/err.h> -#include <linux/gpio.h> #include <linux/interrupt.h> #include <linux/io.h> #include <linux/irq.h> @@ -19,11 +18,9 @@ #include <linux/module.h> #include <linux/of.h> #include <linux/of_device.h> -#include <linux/of_gpio.h> #include <linux/pinctrl/consumer.h> #include <linux/platform_device.h> #include <linux/platform_data/dma-imx.h> -#include <linux/platform_data/spi-imx.h> #include <linux/pm_runtime.h> #include <linux/slab.h> #include <linux/spi/spi.h> @@ -101,6 +98,7 @@ struct fsl_lpspi_data { struct clk *clk_ipg; struct clk *clk_per; bool is_slave; + bool is_only_cs1; bool is_first_byte; void *rx_buf; @@ -122,8 +120,6 @@ struct fsl_lpspi_data { bool usedma; struct completion dma_rx_completion; struct completion dma_tx_completion; - - int chipselect[]; }; static const struct of_device_id fsl_lpspi_dt_ids[] = { @@ -224,20 +220,6 @@ static int lpspi_unprepare_xfer_hardware(struct spi_controller *controller) return 0; } -static int fsl_lpspi_prepare_message(struct spi_controller *controller, - struct spi_message *msg) -{ - struct fsl_lpspi_data *fsl_lpspi = - spi_controller_get_devdata(controller); - struct spi_device *spi = msg->spi; - int gpio = fsl_lpspi->chipselect[spi->chip_select]; - - if (gpio_is_valid(gpio)) - gpio_direction_output(gpio, spi->mode & SPI_CS_HIGH ? 0 : 1); - - return 0; -} - static void fsl_lpspi_write_tx_fifo(struct fsl_lpspi_data *fsl_lpspi) { u8 txfifo_cnt; @@ -276,10 +258,9 @@ static void fsl_lpspi_set_cmd(struct fsl_lpspi_data *fsl_lpspi) temp |= fsl_lpspi->config.bpw - 1; temp |= (fsl_lpspi->config.mode & 0x3) << 30; + temp |= (fsl_lpspi->config.chip_select & 0x3) << 24; if (!fsl_lpspi->is_slave) { temp |= fsl_lpspi->config.prescale << 27; - temp |= (fsl_lpspi->config.chip_select & 0x3) << 24; - /* * Set TCR_CONT will keep SS asserted after current transfer. * For the first transfer, clear TCR_CONTC to assert SS. @@ -440,7 +421,10 @@ static int fsl_lpspi_setup_transfer(struct spi_controller *controller, fsl_lpspi->config.mode = spi->mode; fsl_lpspi->config.bpw = t->bits_per_word; fsl_lpspi->config.speed_hz = t->speed_hz; - fsl_lpspi->config.chip_select = spi->chip_select; + if (fsl_lpspi->is_only_cs1) + fsl_lpspi->config.chip_select = 1; + else + fsl_lpspi->config.chip_select = spi->chip_select; if (!fsl_lpspi->config.speed_hz) fsl_lpspi->config.speed_hz = spi->max_speed_hz; @@ -831,13 +815,10 @@ static int fsl_lpspi_init_rpm(struct fsl_lpspi_data *fsl_lpspi) static int fsl_lpspi_probe(struct platform_device *pdev) { - struct device_node *np = pdev->dev.of_node; struct fsl_lpspi_data *fsl_lpspi; struct spi_controller *controller; - struct spi_imx_master *lpspi_platform_info = - dev_get_platdata(&pdev->dev); struct resource *res; - int i, ret, irq; + int ret, irq; u32 temp; bool is_slave; @@ -857,6 +838,8 @@ static int fsl_lpspi_probe(struct platform_device *pdev) fsl_lpspi = spi_controller_get_devdata(controller); fsl_lpspi->dev = &pdev->dev; fsl_lpspi->is_slave = is_slave; + fsl_lpspi->is_only_cs1 = of_property_read_bool((&pdev->dev)->of_node, + "fsl,spi-only-use-cs1-sel"); controller->bits_per_word_mask = SPI_BPW_RANGE_MASK(8, 32); controller->transfer_one = fsl_lpspi_transfer_one; @@ -867,35 +850,8 @@ static int fsl_lpspi_probe(struct platform_device *pdev) controller->dev.of_node = pdev->dev.of_node; controller->bus_num = pdev->id; controller->slave_abort = fsl_lpspi_slave_abort; - - ret = devm_spi_register_controller(&pdev->dev, controller); - if (ret < 0) { - dev_err(&pdev->dev, "spi_register_controller error.\n"); - goto out_controller_put; - } - - if (!fsl_lpspi->is_slave) { - for (i = 0; i < controller->num_chipselect; i++) { - int cs_gpio = of_get_named_gpio(np, "cs-gpios", i); - - if (!gpio_is_valid(cs_gpio) && lpspi_platform_info) - cs_gpio = lpspi_platform_info->chipselect[i]; - - fsl_lpspi->chipselect[i] = cs_gpio; - if (!gpio_is_valid(cs_gpio)) - continue; - - ret = devm_gpio_request(&pdev->dev, - fsl_lpspi->chipselect[i], - DRIVER_NAME); - if (ret) { - dev_err(&pdev->dev, "can't get cs gpios\n"); - goto out_controller_put; - } - } - controller->cs_gpios = fsl_lpspi->chipselect; - controller->prepare_message = fsl_lpspi_prepare_message; - } + if (!fsl_lpspi->is_slave) + controller->use_gpio_descriptors = true; init_completion(&fsl_lpspi->xfer_done); @@ -954,10 +910,21 @@ static int fsl_lpspi_probe(struct platform_device *pdev) if (ret < 0) dev_err(&pdev->dev, "dma setup error %d, use pio\n", ret); + ret = devm_spi_register_controller(&pdev->dev, controller); + if (ret < 0) { + dev_err(&pdev->dev, "spi_register_controller error.\n"); + goto out_pm_get; + } + + pm_runtime_mark_last_busy(fsl_lpspi->dev); + pm_runtime_put_autosuspend(fsl_lpspi->dev); + return 0; out_pm_get: - pm_runtime_put_noidle(fsl_lpspi->dev); + pm_runtime_dont_use_autosuspend(fsl_lpspi->dev); + pm_runtime_put_sync(fsl_lpspi->dev); + pm_runtime_disable(fsl_lpspi->dev); out_controller_put: spi_controller_put(controller); diff --git a/drivers/spi/spi-fsl-qspi.c b/drivers/spi/spi-fsl-qspi.c index 6766262d7e75..9851551ebbe0 100644 --- a/drivers/spi/spi-fsl-qspi.c +++ b/drivers/spi/spi-fsl-qspi.c @@ -15,7 +15,7 @@ * Yogesh Gaur <yogeshnarayan.gaur@nxp.com> * Suresh Gupta <suresh.gupta@nxp.com> * - * Based on the original fsl-quadspi.c spi-nor driver: + * Based on the original fsl-quadspi.c SPI NOR driver: * Author: Freescale Semiconductor, Inc. * */ diff --git a/drivers/spi/spi-fsl-spi.c b/drivers/spi/spi-fsl-spi.c index 67f022b8c81d..299e9870cf58 100644 --- a/drivers/spi/spi-fsl-spi.c +++ b/drivers/spi/spi-fsl-spi.c @@ -90,7 +90,7 @@ static void fsl_spi_change_mode(struct spi_device *spi) { struct mpc8xxx_spi *mspi = spi_master_get_devdata(spi->master); struct spi_mpc8xxx_cs *cs = spi->controller_state; - struct fsl_spi_reg *reg_base = mspi->reg_base; + struct fsl_spi_reg __iomem *reg_base = mspi->reg_base; __be32 __iomem *mode = ®_base->mode; unsigned long flags; @@ -291,7 +291,7 @@ static int fsl_spi_cpu_bufs(struct mpc8xxx_spi *mspi, struct spi_transfer *t, unsigned int len) { u32 word; - struct fsl_spi_reg *reg_base = mspi->reg_base; + struct fsl_spi_reg __iomem *reg_base = mspi->reg_base; mspi->count = len; @@ -309,7 +309,7 @@ static int fsl_spi_bufs(struct spi_device *spi, struct spi_transfer *t, bool is_dma_mapped) { struct mpc8xxx_spi *mpc8xxx_spi = spi_master_get_devdata(spi->master); - struct fsl_spi_reg *reg_base; + struct fsl_spi_reg __iomem *reg_base; unsigned int len = t->len; u8 bits_per_word; int ret; @@ -440,7 +440,7 @@ static int fsl_spi_do_one_msg(struct spi_master *master, static int fsl_spi_setup(struct spi_device *spi) { struct mpc8xxx_spi *mpc8xxx_spi; - struct fsl_spi_reg *reg_base; + struct fsl_spi_reg __iomem *reg_base; int retval; u32 hw_mode; struct spi_mpc8xxx_cs *cs = spi_get_ctldata(spi); @@ -495,7 +495,7 @@ static void fsl_spi_cleanup(struct spi_device *spi) static void fsl_spi_cpu_irq(struct mpc8xxx_spi *mspi, u32 events) { - struct fsl_spi_reg *reg_base = mspi->reg_base; + struct fsl_spi_reg __iomem *reg_base = mspi->reg_base; /* We need handle RX first */ if (events & SPIE_NE) { @@ -530,7 +530,7 @@ static irqreturn_t fsl_spi_irq(s32 irq, void *context_data) struct mpc8xxx_spi *mspi = context_data; irqreturn_t ret = IRQ_NONE; u32 events; - struct fsl_spi_reg *reg_base = mspi->reg_base; + struct fsl_spi_reg __iomem *reg_base = mspi->reg_base; /* Get interrupt events(tx/rx) */ events = mpc8xxx_spi_read_reg(®_base->event); @@ -550,7 +550,7 @@ static irqreturn_t fsl_spi_irq(s32 irq, void *context_data) static void fsl_spi_grlib_cs_control(struct spi_device *spi, bool on) { struct mpc8xxx_spi *mpc8xxx_spi = spi_master_get_devdata(spi->master); - struct fsl_spi_reg *reg_base = mpc8xxx_spi->reg_base; + struct fsl_spi_reg __iomem *reg_base = mpc8xxx_spi->reg_base; u32 slvsel; u16 cs = spi->chip_select; @@ -568,7 +568,7 @@ static void fsl_spi_grlib_probe(struct device *dev) struct fsl_spi_platform_data *pdata = dev_get_platdata(dev); struct spi_master *master = dev_get_drvdata(dev); struct mpc8xxx_spi *mpc8xxx_spi = spi_master_get_devdata(master); - struct fsl_spi_reg *reg_base = mpc8xxx_spi->reg_base; + struct fsl_spi_reg __iomem *reg_base = mpc8xxx_spi->reg_base; int mbits; u32 capabilities; @@ -594,7 +594,7 @@ static struct spi_master *fsl_spi_probe(struct device *dev, struct fsl_spi_platform_data *pdata = dev_get_platdata(dev); struct spi_master *master; struct mpc8xxx_spi *mpc8xxx_spi; - struct fsl_spi_reg *reg_base; + struct fsl_spi_reg __iomem *reg_base; u32 regval; int ret = 0; diff --git a/drivers/spi/spi-geni-qcom.c b/drivers/spi/spi-geni-qcom.c index c3972424af71..1d96a7f32fda 100644 --- a/drivers/spi/spi-geni-qcom.c +++ b/drivers/spi/spi-geni-qcom.c @@ -51,7 +51,6 @@ /* M_CMD OP codes for SPI */ #define SPI_TX_ONLY 1 #define SPI_RX_ONLY 2 -#define SPI_FULL_DUPLEX 3 #define SPI_TX_RX 7 #define SPI_CS_ASSERT 8 #define SPI_CS_DEASSERT 9 @@ -63,13 +62,6 @@ #define TIMESTAMP_AFTER BIT(3) #define POST_CMD_DELAY BIT(4) -enum spi_m_cmd_opcode { - CMD_NONE, - CMD_XFER, - CMD_CS, - CMD_CANCEL, -}; - struct spi_geni_master { struct geni_se se; struct device *dev; @@ -81,11 +73,13 @@ struct spi_geni_master { unsigned int tx_rem_bytes; unsigned int rx_rem_bytes; const struct spi_transfer *cur_xfer; - struct completion xfer_done; + struct completion cs_done; + struct completion cancel_done; + struct completion abort_done; unsigned int oversampling; spinlock_t lock; - enum spi_m_cmd_opcode cur_mcmd; int irq; + bool cs_flag; }; static int get_spi_clk_cfg(unsigned int speed_hz, @@ -122,24 +116,26 @@ static void handle_fifo_timeout(struct spi_master *spi, struct spi_message *msg) { struct spi_geni_master *mas = spi_master_get_devdata(spi); - unsigned long time_left, flags; + unsigned long time_left; struct geni_se *se = &mas->se; - spin_lock_irqsave(&mas->lock, flags); - reinit_completion(&mas->xfer_done); - mas->cur_mcmd = CMD_CANCEL; - geni_se_cancel_m_cmd(se); + spin_lock_irq(&mas->lock); + reinit_completion(&mas->cancel_done); writel(0, se->base + SE_GENI_TX_WATERMARK_REG); - spin_unlock_irqrestore(&mas->lock, flags); - time_left = wait_for_completion_timeout(&mas->xfer_done, HZ); + mas->cur_xfer = NULL; + geni_se_cancel_m_cmd(se); + spin_unlock_irq(&mas->lock); + + time_left = wait_for_completion_timeout(&mas->cancel_done, HZ); if (time_left) return; - spin_lock_irqsave(&mas->lock, flags); - reinit_completion(&mas->xfer_done); + spin_lock_irq(&mas->lock); + reinit_completion(&mas->abort_done); geni_se_abort_m_cmd(se); - spin_unlock_irqrestore(&mas->lock, flags); - time_left = wait_for_completion_timeout(&mas->xfer_done, HZ); + spin_unlock_irq(&mas->lock); + + time_left = wait_for_completion_timeout(&mas->abort_done, HZ); if (!time_left) dev_err(mas->dev, "Failed to cancel/abort m_cmd\n"); } @@ -151,18 +147,24 @@ static void spi_geni_set_cs(struct spi_device *slv, bool set_flag) struct geni_se *se = &mas->se; unsigned long time_left; - reinit_completion(&mas->xfer_done); - pm_runtime_get_sync(mas->dev); if (!(slv->mode & SPI_CS_HIGH)) set_flag = !set_flag; - mas->cur_mcmd = CMD_CS; + if (set_flag == mas->cs_flag) + return; + + mas->cs_flag = set_flag; + + pm_runtime_get_sync(mas->dev); + spin_lock_irq(&mas->lock); + reinit_completion(&mas->cs_done); if (set_flag) geni_se_setup_m_cmd(se, SPI_CS_ASSERT, 0); else geni_se_setup_m_cmd(se, SPI_CS_DEASSERT, 0); + spin_unlock_irq(&mas->lock); - time_left = wait_for_completion_timeout(&mas->xfer_done, HZ); + time_left = wait_for_completion_timeout(&mas->cs_done, HZ); if (!time_left) handle_fifo_timeout(spi, NULL); @@ -283,7 +285,7 @@ static int spi_geni_init(struct spi_geni_master *mas) * Hardware programming guide suggests to configure * RX FIFO RFR level to fifo_depth-2. */ - geni_se_init(se, 0x0, mas->tx_fifo_depth - 2); + geni_se_init(se, mas->tx_fifo_depth / 2, mas->tx_fifo_depth - 2); /* Transmit an entire FIFO worth of data per IRQ */ mas->tx_wm = 1; ver = geni_se_get_qup_hw_version(se); @@ -307,6 +309,21 @@ static void setup_fifo_xfer(struct spi_transfer *xfer, u32 spi_tx_cfg, len; struct geni_se *se = &mas->se; + /* + * Ensure that our interrupt handler isn't still running from some + * prior command before we start messing with the hardware behind + * its back. We don't need to _keep_ the lock here since we're only + * worried about racing with out interrupt handler. The SPI core + * already handles making sure that we're not trying to do two + * transfers at once or setting a chip select and doing a transfer + * concurrently. + * + * NOTE: we actually _can't_ hold the lock here because possibly we + * might call clk_set_rate() which needs to be able to sleep. + */ + spin_lock_irq(&mas->lock); + spin_unlock_irq(&mas->lock); + spi_tx_cfg = readl(se->base + SE_SPI_TRANS_CFG); if (xfer->bits_per_word != mas->cur_bits_per_word) { spi_setup_word_len(mas, mode, xfer->bits_per_word); @@ -340,12 +357,6 @@ static void setup_fifo_xfer(struct spi_transfer *xfer, mas->tx_rem_bytes = 0; mas->rx_rem_bytes = 0; - if (xfer->tx_buf && xfer->rx_buf) - m_cmd = SPI_FULL_DUPLEX; - else if (xfer->tx_buf) - m_cmd = SPI_TX_ONLY; - else if (xfer->rx_buf) - m_cmd = SPI_RX_ONLY; spi_tx_cfg &= ~CS_TOGGLE; @@ -356,17 +367,24 @@ static void setup_fifo_xfer(struct spi_transfer *xfer, len &= TRANS_LEN_MSK; mas->cur_xfer = xfer; - if (m_cmd & SPI_TX_ONLY) { + if (xfer->tx_buf) { + m_cmd |= SPI_TX_ONLY; mas->tx_rem_bytes = xfer->len; writel(len, se->base + SE_SPI_TX_TRANS_LEN); } - if (m_cmd & SPI_RX_ONLY) { + if (xfer->rx_buf) { + m_cmd |= SPI_RX_ONLY; writel(len, se->base + SE_SPI_RX_TRANS_LEN); mas->rx_rem_bytes = xfer->len; } writel(spi_tx_cfg, se->base + SE_SPI_TRANS_CFG); - mas->cur_mcmd = CMD_XFER; + + /* + * Lock around right before we start the transfer since our + * interrupt could come in at any time now. + */ + spin_lock_irq(&mas->lock); geni_se_setup_m_cmd(se, m_cmd, FRAGMENTATION); /* @@ -376,6 +394,7 @@ static void setup_fifo_xfer(struct spi_transfer *xfer, */ if (m_cmd & SPI_TX_ONLY) writel(mas->tx_wm, se->base + SE_GENI_TX_WATERMARK_REG); + spin_unlock_irq(&mas->lock); } static int spi_geni_transfer_one(struct spi_master *spi, @@ -477,13 +496,17 @@ static irqreturn_t geni_spi_isr(int irq, void *data) struct spi_geni_master *mas = spi_master_get_devdata(spi); struct geni_se *se = &mas->se; u32 m_irq; - unsigned long flags; - if (mas->cur_mcmd == CMD_NONE) + m_irq = readl(se->base + SE_GENI_M_IRQ_STATUS); + if (!m_irq) return IRQ_NONE; - spin_lock_irqsave(&mas->lock, flags); - m_irq = readl(se->base + SE_GENI_M_IRQ_STATUS); + if (m_irq & (M_CMD_OVERRUN_EN | M_ILLEGAL_CMD_EN | M_CMD_FAILURE_EN | + M_RX_FIFO_RD_ERR_EN | M_RX_FIFO_WR_ERR_EN | + M_TX_FIFO_RD_ERR_EN | M_TX_FIFO_WR_ERR_EN)) + dev_warn(mas->dev, "Unexpected IRQ err status %#010x\n", m_irq); + + spin_lock(&mas->lock); if ((m_irq & M_RX_FIFO_WATERMARK_EN) || (m_irq & M_RX_FIFO_LAST_EN)) geni_spi_handle_rx(mas); @@ -492,39 +515,57 @@ static irqreturn_t geni_spi_isr(int irq, void *data) geni_spi_handle_tx(mas); if (m_irq & M_CMD_DONE_EN) { - if (mas->cur_mcmd == CMD_XFER) + if (mas->cur_xfer) { spi_finalize_current_transfer(spi); - else if (mas->cur_mcmd == CMD_CS) - complete(&mas->xfer_done); - mas->cur_mcmd = CMD_NONE; - /* - * If this happens, then a CMD_DONE came before all the Tx - * buffer bytes were sent out. This is unusual, log this - * condition and disable the WM interrupt to prevent the - * system from stalling due an interrupt storm. - * If this happens when all Rx bytes haven't been received, log - * the condition. - * The only known time this can happen is if bits_per_word != 8 - * and some registers that expect xfer lengths in num spi_words - * weren't written correctly. - */ - if (mas->tx_rem_bytes) { - writel(0, se->base + SE_GENI_TX_WATERMARK_REG); - dev_err(mas->dev, "Premature done. tx_rem = %d bpw%d\n", - mas->tx_rem_bytes, mas->cur_bits_per_word); + mas->cur_xfer = NULL; + /* + * If this happens, then a CMD_DONE came before all the + * Tx buffer bytes were sent out. This is unusual, log + * this condition and disable the WM interrupt to + * prevent the system from stalling due an interrupt + * storm. + * + * If this happens when all Rx bytes haven't been + * received, log the condition. The only known time + * this can happen is if bits_per_word != 8 and some + * registers that expect xfer lengths in num spi_words + * weren't written correctly. + */ + if (mas->tx_rem_bytes) { + writel(0, se->base + SE_GENI_TX_WATERMARK_REG); + dev_err(mas->dev, "Premature done. tx_rem = %d bpw%d\n", + mas->tx_rem_bytes, mas->cur_bits_per_word); + } + if (mas->rx_rem_bytes) + dev_err(mas->dev, "Premature done. rx_rem = %d bpw%d\n", + mas->rx_rem_bytes, mas->cur_bits_per_word); + } else { + complete(&mas->cs_done); } - if (mas->rx_rem_bytes) - dev_err(mas->dev, "Premature done. rx_rem = %d bpw%d\n", - mas->rx_rem_bytes, mas->cur_bits_per_word); } - if ((m_irq & M_CMD_CANCEL_EN) || (m_irq & M_CMD_ABORT_EN)) { - mas->cur_mcmd = CMD_NONE; - complete(&mas->xfer_done); - } + if (m_irq & M_CMD_CANCEL_EN) + complete(&mas->cancel_done); + if (m_irq & M_CMD_ABORT_EN) + complete(&mas->abort_done); + /* + * It's safe or a good idea to Ack all of our our interrupts at the + * end of the function. Specifically: + * - M_CMD_DONE_EN / M_RX_FIFO_LAST_EN: Edge triggered interrupts and + * clearing Acks. Clearing at the end relies on nobody else having + * started a new transfer yet or else we could be clearing _their_ + * done bit, but everyone grabs the spinlock before starting a new + * transfer. + * - M_RX_FIFO_WATERMARK_EN / M_TX_FIFO_WATERMARK_EN: These appear + * to be "latched level" interrupts so it's important to clear them + * _after_ you've handled the condition and always safe to do so + * since they'll re-assert if they're still happening. + */ writel(m_irq, se->base + SE_GENI_M_IRQ_CLEAR); - spin_unlock_irqrestore(&mas->lock, flags); + + spin_unlock(&mas->lock); + return IRQ_HANDLED; } @@ -574,8 +615,12 @@ static int spi_geni_probe(struct platform_device *pdev) spi->handle_err = handle_fifo_timeout; spi->set_cs = spi_geni_set_cs; - init_completion(&mas->xfer_done); + init_completion(&mas->cs_done); + init_completion(&mas->cancel_done); + init_completion(&mas->abort_done); spin_lock_init(&mas->lock); + pm_runtime_use_autosuspend(&pdev->dev); + pm_runtime_set_autosuspend_delay(&pdev->dev, 250); pm_runtime_enable(dev); ret = spi_geni_init(mas); diff --git a/drivers/spi/spi-img-spfi.c b/drivers/spi/spi-img-spfi.c index 8543f5ed1099..b068537375d6 100644 --- a/drivers/spi/spi-img-spfi.c +++ b/drivers/spi/spi-img-spfi.c @@ -9,7 +9,6 @@ #include <linux/clk.h> #include <linux/delay.h> #include <linux/dmaengine.h> -#include <linux/gpio.h> #include <linux/interrupt.h> #include <linux/io.h> #include <linux/irq.h> @@ -102,10 +101,6 @@ struct img_spfi { bool rx_dma_busy; }; -struct img_spfi_device_data { - bool gpio_requested; -}; - static inline u32 spfi_readl(struct img_spfi *spfi, u32 reg) { return readl(spfi->regs + reg); @@ -442,54 +437,6 @@ static int img_spfi_unprepare(struct spi_master *master, return 0; } -static int img_spfi_setup(struct spi_device *spi) -{ - int ret = -EINVAL; - struct img_spfi_device_data *spfi_data = spi_get_ctldata(spi); - - if (!spfi_data) { - spfi_data = kzalloc(sizeof(*spfi_data), GFP_KERNEL); - if (!spfi_data) - return -ENOMEM; - spfi_data->gpio_requested = false; - spi_set_ctldata(spi, spfi_data); - } - if (!spfi_data->gpio_requested) { - ret = gpio_request_one(spi->cs_gpio, - (spi->mode & SPI_CS_HIGH) ? - GPIOF_OUT_INIT_LOW : GPIOF_OUT_INIT_HIGH, - dev_name(&spi->dev)); - if (ret) - dev_err(&spi->dev, "can't request chipselect gpio %d\n", - spi->cs_gpio); - else - spfi_data->gpio_requested = true; - } else { - if (gpio_is_valid(spi->cs_gpio)) { - int mode = ((spi->mode & SPI_CS_HIGH) ? - GPIOF_OUT_INIT_LOW : GPIOF_OUT_INIT_HIGH); - - ret = gpio_direction_output(spi->cs_gpio, mode); - if (ret) - dev_err(&spi->dev, "chipselect gpio %d setup failed (%d)\n", - spi->cs_gpio, ret); - } - } - return ret; -} - -static void img_spfi_cleanup(struct spi_device *spi) -{ - struct img_spfi_device_data *spfi_data = spi_get_ctldata(spi); - - if (spfi_data) { - if (spfi_data->gpio_requested) - gpio_free(spi->cs_gpio); - kfree(spfi_data); - spi_set_ctldata(spi, NULL); - } -} - static void img_spfi_config(struct spi_master *master, struct spi_device *spi, struct spi_transfer *xfer) { @@ -659,12 +606,11 @@ static int img_spfi_probe(struct platform_device *pdev) master->max_speed_hz = max_speed_hz; } - master->setup = img_spfi_setup; - master->cleanup = img_spfi_cleanup; master->transfer_one = img_spfi_transfer_one; master->prepare_message = img_spfi_prepare; master->unprepare_message = img_spfi_unprepare; master->handle_err = img_spfi_handle_err; + master->use_gpio_descriptors = true; spfi->tx_ch = dma_request_chan(spfi->dev, "tx"); if (IS_ERR(spfi->tx_ch)) { diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c index b7a85e3fe1c1..38a5f1304cec 100644 --- a/drivers/spi/spi-imx.c +++ b/drivers/spi/spi-imx.c @@ -8,23 +8,23 @@ #include <linux/dmaengine.h> #include <linux/dma-mapping.h> #include <linux/err.h> -#include <linux/gpio.h> #include <linux/interrupt.h> #include <linux/io.h> #include <linux/irq.h> #include <linux/kernel.h> #include <linux/module.h> +#include <linux/pinctrl/consumer.h> #include <linux/platform_device.h> +#include <linux/pm_runtime.h> #include <linux/slab.h> #include <linux/spi/spi.h> #include <linux/spi/spi_bitbang.h> #include <linux/types.h> #include <linux/of.h> #include <linux/of_device.h> -#include <linux/of_gpio.h> +#include <linux/property.h> #include <linux/platform_data/dma-imx.h> -#include <linux/platform_data/spi-imx.h> #define DRIVER_NAME "spi_imx" @@ -32,6 +32,8 @@ static bool use_dma = true; module_param(use_dma, bool, 0644); MODULE_PARM_DESC(use_dma, "Enable usage of DMA when available (default)"); +#define MXC_RPM_TIMEOUT 2000 /* 2000ms */ + #define MXC_CSPIRXDATA 0x00 #define MXC_CSPITXDATA 0x04 #define MXC_CSPICTRL 0x08 @@ -224,7 +226,7 @@ static bool spi_imx_can_dma(struct spi_master *master, struct spi_device *spi, { struct spi_imx_data *spi_imx = spi_master_get_devdata(master); - if (!use_dma) + if (!use_dma || master->fallback) return false; if (!master->dma_rx) @@ -723,7 +725,7 @@ static int mx31_prepare_transfer(struct spi_imx_data *spi_imx, reg |= MX31_CSPICTRL_POL; if (spi->mode & SPI_CS_HIGH) reg |= MX31_CSPICTRL_SSPOL; - if (!gpio_is_valid(spi->cs_gpio)) + if (!spi->cs_gpiod) reg |= (spi->chip_select) << (is_imx35_cspi(spi_imx) ? MX35_CSPICTRL_CS_SHIFT : MX31_CSPICTRL_CS_SHIFT); @@ -824,7 +826,7 @@ static int mx21_prepare_transfer(struct spi_imx_data *spi_imx, reg |= MX21_CSPICTRL_POL; if (spi->mode & SPI_CS_HIGH) reg |= MX21_CSPICTRL_SSPOL; - if (!gpio_is_valid(spi->cs_gpio)) + if (!spi->cs_gpiod) reg |= spi->chip_select << MX21_CSPICTRL_CS_SHIFT; writel(reg, spi_imx->base + MXC_CSPICTRL); @@ -1056,20 +1058,6 @@ static const struct of_device_id spi_imx_dt_ids[] = { }; MODULE_DEVICE_TABLE(of, spi_imx_dt_ids); -static void spi_imx_chipselect(struct spi_device *spi, int is_active) -{ - int active = is_active != BITBANG_CS_INACTIVE; - int dev_is_lowactive = !(spi->mode & SPI_CS_HIGH); - - if (spi->mode & SPI_NO_CS) - return; - - if (!gpio_is_valid(spi->cs_gpio)) - return; - - gpio_set_value(spi->cs_gpio, dev_is_lowactive ^ active); -} - static void spi_imx_set_burst_len(struct spi_imx_data *spi_imx, int n_bits) { u32 ctrl; @@ -1364,11 +1352,12 @@ static int spi_imx_dma_transfer(struct spi_imx_data *spi_imx, ret = spi_imx_dma_configure(master); if (ret) - return ret; + goto dma_failure_no_start; if (!spi_imx->devtype_data->setup_wml) { dev_err(spi_imx->dev, "No setup_wml()?\n"); - return -EINVAL; + ret = -EINVAL; + goto dma_failure_no_start; } spi_imx->devtype_data->setup_wml(spi_imx); @@ -1379,8 +1368,10 @@ static int spi_imx_dma_transfer(struct spi_imx_data *spi_imx, desc_rx = dmaengine_prep_slave_sg(master->dma_rx, rx->sgl, rx->nents, DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); - if (!desc_rx) - return -EINVAL; + if (!desc_rx) { + ret = -EINVAL; + goto dma_failure_no_start; + } desc_rx->callback = spi_imx_dma_rx_callback; desc_rx->callback_param = (void *)spi_imx; @@ -1425,6 +1416,10 @@ static int spi_imx_dma_transfer(struct spi_imx_data *spi_imx, } return transfer->len; +/* fallback to pio */ +dma_failure_no_start: + transfer->error |= SPI_TRANS_FAIL_NO_START; + return ret; } static int spi_imx_pio_transfer(struct spi_device *spi, @@ -1507,7 +1502,6 @@ static int spi_imx_transfer(struct spi_device *spi, struct spi_transfer *transfer) { struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master); - int ret; /* flush rxfifo before transfer */ while (spi_imx->devtype_data->rx_available(spi_imx)) @@ -1516,21 +1510,8 @@ static int spi_imx_transfer(struct spi_device *spi, if (spi_imx->slave_mode) return spi_imx_pio_transfer_slave(spi, transfer); - /* - * fallback PIO mode if dma setup error happen, for example sdma - * firmware may not be updated as ERR009165 required. - */ - if (spi_imx->usedma) { - ret = spi_imx_dma_transfer(spi_imx, transfer); - if (ret != -EINVAL) - return ret; - - spi_imx->devtype_data->disable_dma(spi_imx); - - spi_imx->usedma = false; - spi_imx->dynamic_burst = spi_imx->devtype_data->dynamic_burst; - dev_dbg(&spi->dev, "Fallback to PIO mode\n"); - } + if (spi_imx->usedma) + return spi_imx_dma_transfer(spi_imx, transfer); return spi_imx_pio_transfer(spi, transfer); } @@ -1540,15 +1521,6 @@ static int spi_imx_setup(struct spi_device *spi) dev_dbg(&spi->dev, "%s: mode %d, %u bpw, %d hz\n", __func__, spi->mode, spi->bits_per_word, spi->max_speed_hz); - if (spi->mode & SPI_NO_CS) - return 0; - - if (gpio_is_valid(spi->cs_gpio)) - gpio_direction_output(spi->cs_gpio, - spi->mode & SPI_CS_HIGH ? 0 : 1); - - spi_imx_chipselect(spi, BITBANG_CS_INACTIVE); - return 0; } @@ -1562,20 +1534,16 @@ spi_imx_prepare_message(struct spi_master *master, struct spi_message *msg) struct spi_imx_data *spi_imx = spi_master_get_devdata(master); int ret; - ret = clk_enable(spi_imx->clk_per); - if (ret) - return ret; - - ret = clk_enable(spi_imx->clk_ipg); - if (ret) { - clk_disable(spi_imx->clk_per); + ret = pm_runtime_get_sync(spi_imx->dev); + if (ret < 0) { + dev_err(spi_imx->dev, "failed to enable clock\n"); return ret; } ret = spi_imx->devtype_data->prepare_message(spi_imx, msg); if (ret) { - clk_disable(spi_imx->clk_ipg); - clk_disable(spi_imx->clk_per); + pm_runtime_mark_last_busy(spi_imx->dev); + pm_runtime_put_autosuspend(spi_imx->dev); } return ret; @@ -1586,8 +1554,8 @@ spi_imx_unprepare_message(struct spi_master *master, struct spi_message *msg) { struct spi_imx_data *spi_imx = spi_master_get_devdata(master); - clk_disable(spi_imx->clk_ipg); - clk_disable(spi_imx->clk_per); + pm_runtime_mark_last_busy(spi_imx->dev); + pm_runtime_put_autosuspend(spi_imx->dev); return 0; } @@ -1606,20 +1574,14 @@ static int spi_imx_probe(struct platform_device *pdev) struct device_node *np = pdev->dev.of_node; const struct of_device_id *of_id = of_match_device(spi_imx_dt_ids, &pdev->dev); - struct spi_imx_master *mxc_platform_info = - dev_get_platdata(&pdev->dev); struct spi_master *master; struct spi_imx_data *spi_imx; struct resource *res; - int i, ret, irq, spi_drctl; + int ret, irq, spi_drctl; const struct spi_imx_devtype_data *devtype_data = of_id ? of_id->data : (struct spi_imx_devtype_data *)pdev->id_entry->driver_data; bool slave_mode; - - if (!np && !mxc_platform_info) { - dev_err(&pdev->dev, "can't get the platform data\n"); - return -EINVAL; - } + u32 val; slave_mode = devtype_data->has_slavemode && of_property_read_bool(np, "spi-slave"); @@ -1642,6 +1604,7 @@ static int spi_imx_probe(struct platform_device *pdev) master->bits_per_word_mask = SPI_BPW_RANGE_MASK(1, 32); master->bus_num = np ? -1 : pdev->id; + master->use_gpio_descriptors = true; spi_imx = spi_master_get_devdata(master); spi_imx->bitbang.master = master; @@ -1650,28 +1613,17 @@ static int spi_imx_probe(struct platform_device *pdev) spi_imx->devtype_data = devtype_data; - /* Get number of chip selects, either platform data or OF */ - if (mxc_platform_info) { - master->num_chipselect = mxc_platform_info->num_chipselect; - if (mxc_platform_info->chipselect) { - master->cs_gpios = devm_kcalloc(&master->dev, - master->num_chipselect, sizeof(int), - GFP_KERNEL); - if (!master->cs_gpios) - return -ENOMEM; - - for (i = 0; i < master->num_chipselect; i++) - master->cs_gpios[i] = mxc_platform_info->chipselect[i]; - } - } else { - u32 num_cs; - - if (!of_property_read_u32(np, "num-cs", &num_cs)) - master->num_chipselect = num_cs; - /* If not preset, default value of 1 is used */ - } + /* + * Get number of chip selects from device properties. This can be + * coming from device tree or boardfiles, if it is not defined, + * a default value of 3 chip selects will be used, as all the legacy + * board files have <= 3 chip selects. + */ + if (!device_property_read_u32(&pdev->dev, "num-cs", &val)) + master->num_chipselect = val; + else + master->num_chipselect = 3; - spi_imx->bitbang.chipselect = spi_imx_chipselect; spi_imx->bitbang.setup_transfer = spi_imx_setupxfer; spi_imx->bitbang.txrx_bufs = spi_imx_transfer; spi_imx->bitbang.master->setup = spi_imx_setup; @@ -1722,13 +1674,15 @@ static int spi_imx_probe(struct platform_device *pdev) goto out_master_put; } - ret = clk_prepare_enable(spi_imx->clk_per); - if (ret) - goto out_master_put; + pm_runtime_enable(spi_imx->dev); + pm_runtime_set_autosuspend_delay(spi_imx->dev, MXC_RPM_TIMEOUT); + pm_runtime_use_autosuspend(spi_imx->dev); - ret = clk_prepare_enable(spi_imx->clk_ipg); - if (ret) - goto out_put_per; + ret = pm_runtime_get_sync(spi_imx->dev); + if (ret < 0) { + dev_err(spi_imx->dev, "failed to enable clock\n"); + goto out_runtime_pm_put; + } spi_imx->spi_clk = clk_get_rate(spi_imx->clk_per); /* @@ -1738,7 +1692,7 @@ static int spi_imx_probe(struct platform_device *pdev) if (spi_imx->devtype_data->has_dmamode) { ret = spi_imx_sdma_init(&pdev->dev, spi_imx, master); if (ret == -EPROBE_DEFER) - goto out_clk_put; + goto out_runtime_pm_put; if (ret < 0) dev_err(&pdev->dev, "dma setup error %d, use pio\n", @@ -1753,38 +1707,20 @@ static int spi_imx_probe(struct platform_device *pdev) ret = spi_bitbang_start(&spi_imx->bitbang); if (ret) { dev_err(&pdev->dev, "bitbang start failed with %d\n", ret); - goto out_clk_put; - } - - /* Request GPIO CS lines, if any */ - if (!spi_imx->slave_mode && master->cs_gpios) { - for (i = 0; i < master->num_chipselect; i++) { - if (!gpio_is_valid(master->cs_gpios[i])) - continue; - - ret = devm_gpio_request(&pdev->dev, - master->cs_gpios[i], - DRIVER_NAME); - if (ret) { - dev_err(&pdev->dev, "Can't get CS GPIO %i\n", - master->cs_gpios[i]); - goto out_spi_bitbang; - } - } + goto out_runtime_pm_put; } dev_info(&pdev->dev, "probed\n"); - clk_disable(spi_imx->clk_ipg); - clk_disable(spi_imx->clk_per); + pm_runtime_mark_last_busy(spi_imx->dev); + pm_runtime_put_autosuspend(spi_imx->dev); + return ret; -out_spi_bitbang: - spi_bitbang_stop(&spi_imx->bitbang); -out_clk_put: - clk_disable_unprepare(spi_imx->clk_ipg); -out_put_per: - clk_disable_unprepare(spi_imx->clk_per); +out_runtime_pm_put: + pm_runtime_dont_use_autosuspend(spi_imx->dev); + pm_runtime_put_sync(spi_imx->dev); + pm_runtime_disable(spi_imx->dev); out_master_put: spi_master_put(master); @@ -1799,30 +1735,82 @@ static int spi_imx_remove(struct platform_device *pdev) spi_bitbang_stop(&spi_imx->bitbang); - ret = clk_enable(spi_imx->clk_per); + ret = pm_runtime_get_sync(spi_imx->dev); + if (ret < 0) { + dev_err(spi_imx->dev, "failed to enable clock\n"); + return ret; + } + + writel(0, spi_imx->base + MXC_CSPICTRL); + + pm_runtime_dont_use_autosuspend(spi_imx->dev); + pm_runtime_put_sync(spi_imx->dev); + pm_runtime_disable(spi_imx->dev); + + spi_imx_sdma_exit(spi_imx); + spi_master_put(master); + + return 0; +} + +static int __maybe_unused spi_imx_runtime_resume(struct device *dev) +{ + struct spi_master *master = dev_get_drvdata(dev); + struct spi_imx_data *spi_imx; + int ret; + + spi_imx = spi_master_get_devdata(master); + + ret = clk_prepare_enable(spi_imx->clk_per); if (ret) return ret; - ret = clk_enable(spi_imx->clk_ipg); + ret = clk_prepare_enable(spi_imx->clk_ipg); if (ret) { - clk_disable(spi_imx->clk_per); + clk_disable_unprepare(spi_imx->clk_per); return ret; } - writel(0, spi_imx->base + MXC_CSPICTRL); - clk_disable_unprepare(spi_imx->clk_ipg); + return 0; +} + +static int __maybe_unused spi_imx_runtime_suspend(struct device *dev) +{ + struct spi_master *master = dev_get_drvdata(dev); + struct spi_imx_data *spi_imx; + + spi_imx = spi_master_get_devdata(master); + clk_disable_unprepare(spi_imx->clk_per); - spi_imx_sdma_exit(spi_imx); - spi_master_put(master); + clk_disable_unprepare(spi_imx->clk_ipg); + + return 0; +} + +static int __maybe_unused spi_imx_suspend(struct device *dev) +{ + pinctrl_pm_select_sleep_state(dev); + return 0; +} +static int __maybe_unused spi_imx_resume(struct device *dev) +{ + pinctrl_pm_select_default_state(dev); return 0; } +static const struct dev_pm_ops imx_spi_pm = { + SET_RUNTIME_PM_OPS(spi_imx_runtime_suspend, + spi_imx_runtime_resume, NULL) + SET_SYSTEM_SLEEP_PM_OPS(spi_imx_suspend, spi_imx_resume) +}; + static struct platform_driver spi_imx_driver = { .driver = { .name = DRIVER_NAME, .of_match_table = spi_imx_dt_ids, - }, + .pm = &imx_spi_pm, + }, .id_table = spi_imx_devtype, .probe = spi_imx_probe, .remove = spi_imx_remove, diff --git a/drivers/spi/spi-lantiq-ssc.c b/drivers/spi/spi-lantiq-ssc.c index 1fd7ee53d451..dccef1dcea32 100644 --- a/drivers/spi/spi-lantiq-ssc.c +++ b/drivers/spi/spi-lantiq-ssc.c @@ -15,7 +15,6 @@ #include <linux/completion.h> #include <linux/spinlock.h> #include <linux/err.h> -#include <linux/gpio.h> #include <linux/pm_runtime.h> #include <linux/spi/spi.h> @@ -50,8 +49,6 @@ #define LTQ_SPI_RXCNT 0x84 #define LTQ_SPI_DMACON 0xec #define LTQ_SPI_IRNEN 0xf4 -#define LTQ_SPI_IRNICR 0xf8 -#define LTQ_SPI_IRNCR 0xfc #define LTQ_SPI_CLC_SMC_S 16 /* Clock divider for sleep mode */ #define LTQ_SPI_CLC_SMC_M (0xFF << LTQ_SPI_CLC_SMC_S) @@ -61,9 +58,7 @@ #define LTQ_SPI_CLC_DISR BIT(0) /* Disable request bit */ #define LTQ_SPI_ID_TXFS_S 24 /* Implemented TX FIFO size */ -#define LTQ_SPI_ID_TXFS_M (0x3F << LTQ_SPI_ID_TXFS_S) #define LTQ_SPI_ID_RXFS_S 16 /* Implemented RX FIFO size */ -#define LTQ_SPI_ID_RXFS_M (0x3F << LTQ_SPI_ID_RXFS_S) #define LTQ_SPI_ID_MOD_S 8 /* Module ID */ #define LTQ_SPI_ID_MOD_M (0xff << LTQ_SPI_ID_MOD_S) #define LTQ_SPI_ID_CFG_S 5 /* DMA interface support */ @@ -126,19 +121,15 @@ LTQ_SPI_WHBSTATE_CLRTUE) #define LTQ_SPI_RXFCON_RXFITL_S 8 /* FIFO interrupt trigger level */ -#define LTQ_SPI_RXFCON_RXFITL_M (0x3F << LTQ_SPI_RXFCON_RXFITL_S) #define LTQ_SPI_RXFCON_RXFLU BIT(1) /* FIFO flush */ #define LTQ_SPI_RXFCON_RXFEN BIT(0) /* FIFO enable */ #define LTQ_SPI_TXFCON_TXFITL_S 8 /* FIFO interrupt trigger level */ -#define LTQ_SPI_TXFCON_TXFITL_M (0x3F << LTQ_SPI_TXFCON_TXFITL_S) #define LTQ_SPI_TXFCON_TXFLU BIT(1) /* FIFO flush */ #define LTQ_SPI_TXFCON_TXFEN BIT(0) /* FIFO enable */ #define LTQ_SPI_FSTAT_RXFFL_S 0 -#define LTQ_SPI_FSTAT_RXFFL_M (0x3f << LTQ_SPI_FSTAT_RXFFL_S) #define LTQ_SPI_FSTAT_TXFFL_S 8 -#define LTQ_SPI_FSTAT_TXFFL_M (0x3f << LTQ_SPI_FSTAT_TXFFL_S) #define LTQ_SPI_GPOCON_ISCSBN_S 8 #define LTQ_SPI_GPOCON_INVOUTN_S 0 @@ -158,9 +149,16 @@ #define LTQ_SPI_IRNEN_T_XRX BIT(0) /* Receive end interrupt request */ #define LTQ_SPI_IRNEN_ALL 0x1F +struct lantiq_ssc_spi; + struct lantiq_ssc_hwcfg { - unsigned int irnen_r; - unsigned int irnen_t; + int (*cfg_irq)(struct platform_device *pdev, struct lantiq_ssc_spi *spi); + unsigned int irnen_r; + unsigned int irnen_t; + unsigned int irncr; + unsigned int irnicr; + bool irq_ack; + u32 fifo_size_mask; }; struct lantiq_ssc_spi { @@ -184,6 +182,7 @@ struct lantiq_ssc_spi { unsigned int tx_fifo_size; unsigned int rx_fifo_size; unsigned int base_cs; + unsigned int fdx_tx_level; }; static u32 lantiq_ssc_readl(const struct lantiq_ssc_spi *spi, u32 reg) @@ -209,16 +208,18 @@ static void lantiq_ssc_maskl(const struct lantiq_ssc_spi *spi, u32 clr, static unsigned int tx_fifo_level(const struct lantiq_ssc_spi *spi) { + const struct lantiq_ssc_hwcfg *hwcfg = spi->hwcfg; u32 fstat = lantiq_ssc_readl(spi, LTQ_SPI_FSTAT); - return (fstat & LTQ_SPI_FSTAT_TXFFL_M) >> LTQ_SPI_FSTAT_TXFFL_S; + return (fstat >> LTQ_SPI_FSTAT_TXFFL_S) & hwcfg->fifo_size_mask; } static unsigned int rx_fifo_level(const struct lantiq_ssc_spi *spi) { + const struct lantiq_ssc_hwcfg *hwcfg = spi->hwcfg; u32 fstat = lantiq_ssc_readl(spi, LTQ_SPI_FSTAT); - return fstat & LTQ_SPI_FSTAT_RXFFL_M; + return (fstat >> LTQ_SPI_FSTAT_RXFFL_S) & hwcfg->fifo_size_mask; } static unsigned int tx_fifo_free(const struct lantiq_ssc_spi *spi) @@ -391,7 +392,7 @@ static int lantiq_ssc_setup(struct spi_device *spidev) u32 gpocon; /* GPIOs are used for CS */ - if (gpio_is_valid(spidev->cs_gpio)) + if (spidev->cs_gpiod) return 0; dev_dbg(spi->dev, "using internal chipselect %u\n", cs); @@ -481,6 +482,7 @@ static void tx_fifo_write(struct lantiq_ssc_spi *spi) u32 data; unsigned int tx_free = tx_fifo_free(spi); + spi->fdx_tx_level = 0; while (spi->tx_todo && tx_free) { switch (spi->bits_per_word) { case 2 ... 8: @@ -509,6 +511,7 @@ static void tx_fifo_write(struct lantiq_ssc_spi *spi) lantiq_ssc_writel(spi, data, LTQ_SPI_TB); tx_free--; + spi->fdx_tx_level++; } } @@ -520,6 +523,13 @@ static void rx_fifo_read_full_duplex(struct lantiq_ssc_spi *spi) u32 data; unsigned int rx_fill = rx_fifo_level(spi); + /* + * Wait until all expected data to be shifted in. + * Otherwise, rx overrun may occur. + */ + while (rx_fill != spi->fdx_tx_level) + rx_fill = rx_fifo_level(spi); + while (rx_fill) { data = lantiq_ssc_readl(spi, LTQ_SPI_RB); @@ -613,6 +623,13 @@ static void rx_request(struct lantiq_ssc_spi *spi) static irqreturn_t lantiq_ssc_xmit_interrupt(int irq, void *data) { struct lantiq_ssc_spi *spi = data; + const struct lantiq_ssc_hwcfg *hwcfg = spi->hwcfg; + u32 val = lantiq_ssc_readl(spi, hwcfg->irncr); + unsigned long flags; + + spin_lock_irqsave(&spi->lock, flags); + if (hwcfg->irq_ack) + lantiq_ssc_writel(spi, val, hwcfg->irncr); if (spi->tx) { if (spi->rx && spi->rx_todo) @@ -635,10 +652,12 @@ static irqreturn_t lantiq_ssc_xmit_interrupt(int irq, void *data) } } + spin_unlock_irqrestore(&spi->lock, flags); return IRQ_HANDLED; completed: queue_work(spi->wq, &spi->work); + spin_unlock_irqrestore(&spi->lock, flags); return IRQ_HANDLED; } @@ -646,11 +665,18 @@ completed: static irqreturn_t lantiq_ssc_err_interrupt(int irq, void *data) { struct lantiq_ssc_spi *spi = data; + const struct lantiq_ssc_hwcfg *hwcfg = spi->hwcfg; u32 stat = lantiq_ssc_readl(spi, LTQ_SPI_STAT); + u32 val = lantiq_ssc_readl(spi, hwcfg->irncr); + unsigned long flags; if (!(stat & LTQ_SPI_STAT_ERRORS)) return IRQ_NONE; + spin_lock_irqsave(&spi->lock, flags); + if (hwcfg->irq_ack) + lantiq_ssc_writel(spi, val, hwcfg->irncr); + if (stat & LTQ_SPI_STAT_RUE) dev_err(spi->dev, "receive underflow error\n"); if (stat & LTQ_SPI_STAT_TUE) @@ -671,6 +697,25 @@ static irqreturn_t lantiq_ssc_err_interrupt(int irq, void *data) if (spi->master->cur_msg) spi->master->cur_msg->status = -EIO; queue_work(spi->wq, &spi->work); + spin_unlock_irqrestore(&spi->lock, flags); + + return IRQ_HANDLED; +} + +static irqreturn_t intel_lgm_ssc_isr(int irq, void *data) +{ + struct lantiq_ssc_spi *spi = data; + const struct lantiq_ssc_hwcfg *hwcfg = spi->hwcfg; + u32 val = lantiq_ssc_readl(spi, hwcfg->irncr); + + if (!(val & LTQ_SPI_IRNEN_ALL)) + return IRQ_NONE; + + if (val & LTQ_SPI_IRNEN_E) + return lantiq_ssc_err_interrupt(irq, data); + + if ((val & hwcfg->irnen_t) || (val & hwcfg->irnen_r)) + return lantiq_ssc_xmit_interrupt(irq, data); return IRQ_HANDLED; } @@ -775,20 +820,84 @@ static int lantiq_ssc_transfer_one(struct spi_master *master, return transfer_start(spi, spidev, t); } +static int intel_lgm_cfg_irq(struct platform_device *pdev, struct lantiq_ssc_spi *spi) +{ + int irq; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + + return devm_request_irq(&pdev->dev, irq, intel_lgm_ssc_isr, 0, "spi", spi); +} + +static int lantiq_cfg_irq(struct platform_device *pdev, struct lantiq_ssc_spi *spi) +{ + int irq, err; + + irq = platform_get_irq_byname(pdev, LTQ_SPI_RX_IRQ_NAME); + if (irq < 0) + return irq; + + err = devm_request_irq(&pdev->dev, irq, lantiq_ssc_xmit_interrupt, + 0, LTQ_SPI_RX_IRQ_NAME, spi); + if (err) + return err; + + irq = platform_get_irq_byname(pdev, LTQ_SPI_TX_IRQ_NAME); + if (irq < 0) + return irq; + + err = devm_request_irq(&pdev->dev, irq, lantiq_ssc_xmit_interrupt, + 0, LTQ_SPI_TX_IRQ_NAME, spi); + + if (err) + return err; + + irq = platform_get_irq_byname(pdev, LTQ_SPI_ERR_IRQ_NAME); + if (irq < 0) + return irq; + + err = devm_request_irq(&pdev->dev, irq, lantiq_ssc_err_interrupt, + 0, LTQ_SPI_ERR_IRQ_NAME, spi); + return err; +} + static const struct lantiq_ssc_hwcfg lantiq_ssc_xway = { - .irnen_r = LTQ_SPI_IRNEN_R_XWAY, - .irnen_t = LTQ_SPI_IRNEN_T_XWAY, + .cfg_irq = lantiq_cfg_irq, + .irnen_r = LTQ_SPI_IRNEN_R_XWAY, + .irnen_t = LTQ_SPI_IRNEN_T_XWAY, + .irnicr = 0xF8, + .irncr = 0xFC, + .fifo_size_mask = GENMASK(5, 0), + .irq_ack = false, }; static const struct lantiq_ssc_hwcfg lantiq_ssc_xrx = { - .irnen_r = LTQ_SPI_IRNEN_R_XRX, - .irnen_t = LTQ_SPI_IRNEN_T_XRX, + .cfg_irq = lantiq_cfg_irq, + .irnen_r = LTQ_SPI_IRNEN_R_XRX, + .irnen_t = LTQ_SPI_IRNEN_T_XRX, + .irnicr = 0xF8, + .irncr = 0xFC, + .fifo_size_mask = GENMASK(5, 0), + .irq_ack = false, +}; + +static const struct lantiq_ssc_hwcfg intel_ssc_lgm = { + .cfg_irq = intel_lgm_cfg_irq, + .irnen_r = LTQ_SPI_IRNEN_R_XRX, + .irnen_t = LTQ_SPI_IRNEN_T_XRX, + .irnicr = 0xFC, + .irncr = 0xF8, + .fifo_size_mask = GENMASK(7, 0), + .irq_ack = true, }; static const struct of_device_id lantiq_ssc_match[] = { { .compatible = "lantiq,ase-spi", .data = &lantiq_ssc_xway, }, { .compatible = "lantiq,falcon-spi", .data = &lantiq_ssc_xrx, }, { .compatible = "lantiq,xrx100-spi", .data = &lantiq_ssc_xrx, }, + { .compatible = "intel,lgm-spi", .data = &intel_ssc_lgm, }, {}, }; MODULE_DEVICE_TABLE(of, lantiq_ssc_match); @@ -800,9 +909,9 @@ static int lantiq_ssc_probe(struct platform_device *pdev) struct lantiq_ssc_spi *spi; const struct lantiq_ssc_hwcfg *hwcfg; const struct of_device_id *match; - int err, rx_irq, tx_irq, err_irq; u32 id, supports_dma, revision; unsigned int num_cs; + int err; match = of_match_device(lantiq_ssc_match, dev); if (!match) { @@ -811,18 +920,6 @@ static int lantiq_ssc_probe(struct platform_device *pdev) } hwcfg = match->data; - rx_irq = platform_get_irq_byname(pdev, LTQ_SPI_RX_IRQ_NAME); - if (rx_irq < 0) - return -ENXIO; - - tx_irq = platform_get_irq_byname(pdev, LTQ_SPI_TX_IRQ_NAME); - if (tx_irq < 0) - return -ENXIO; - - err_irq = platform_get_irq_byname(pdev, LTQ_SPI_ERR_IRQ_NAME); - if (err_irq < 0) - return -ENXIO; - master = spi_alloc_master(dev, sizeof(struct lantiq_ssc_spi)); if (!master) return -ENOMEM; @@ -838,18 +935,7 @@ static int lantiq_ssc_probe(struct platform_device *pdev) goto err_master_put; } - err = devm_request_irq(dev, rx_irq, lantiq_ssc_xmit_interrupt, - 0, LTQ_SPI_RX_IRQ_NAME, spi); - if (err) - goto err_master_put; - - err = devm_request_irq(dev, tx_irq, lantiq_ssc_xmit_interrupt, - 0, LTQ_SPI_TX_IRQ_NAME, spi); - if (err) - goto err_master_put; - - err = devm_request_irq(dev, err_irq, lantiq_ssc_err_interrupt, - 0, LTQ_SPI_ERR_IRQ_NAME, spi); + err = hwcfg->cfg_irq(pdev, spi); if (err) goto err_master_put; @@ -888,6 +974,7 @@ static int lantiq_ssc_probe(struct platform_device *pdev) master->dev.of_node = pdev->dev.of_node; master->num_chipselect = num_cs; + master->use_gpio_descriptors = true; master->setup = lantiq_ssc_setup; master->set_cs = lantiq_ssc_set_cs; master->handle_err = lantiq_ssc_handle_err; @@ -907,8 +994,8 @@ static int lantiq_ssc_probe(struct platform_device *pdev) INIT_WORK(&spi->work, lantiq_ssc_bussy_work); id = lantiq_ssc_readl(spi, LTQ_SPI_ID); - spi->tx_fifo_size = (id & LTQ_SPI_ID_TXFS_M) >> LTQ_SPI_ID_TXFS_S; - spi->rx_fifo_size = (id & LTQ_SPI_ID_RXFS_M) >> LTQ_SPI_ID_RXFS_S; + spi->tx_fifo_size = (id >> LTQ_SPI_ID_TXFS_S) & hwcfg->fifo_size_mask; + spi->rx_fifo_size = (id >> LTQ_SPI_ID_RXFS_S) & hwcfg->fifo_size_mask; supports_dma = (id & LTQ_SPI_ID_CFG_M) >> LTQ_SPI_ID_CFG_S; revision = id & LTQ_SPI_ID_REV_M; diff --git a/drivers/spi/spi-loopback-test.c b/drivers/spi/spi-loopback-test.c index b6d79cd156fb..9522d1b5786d 100644 --- a/drivers/spi/spi-loopback-test.c +++ b/drivers/spi/spi-loopback-test.c @@ -885,10 +885,10 @@ static int spi_test_run_iter(struct spi_device *spi, /** * spi_test_execute_msg - default implementation to run a test * - * spi: @spi_device on which to run the @spi_message - * test: the test to execute, which already contains @msg - * tx: the tx buffer allocated for the test sequence - * rx: the rx buffer allocated for the test sequence + * @spi: @spi_device on which to run the @spi_message + * @test: the test to execute, which already contains @msg + * @tx: the tx buffer allocated for the test sequence + * @rx: the rx buffer allocated for the test sequence * * Returns: error code of spi_sync as well as basic error checking */ @@ -957,10 +957,10 @@ EXPORT_SYMBOL_GPL(spi_test_execute_msg); * including all the relevant iterations on: * length and buffer alignment * - * spi: the spi_device to send the messages to - * test: the test which we need to execute - * tx: the tx buffer allocated for the test sequence - * rx: the rx buffer allocated for the test sequence + * @spi: the spi_device to send the messages to + * @test: the test which we need to execute + * @tx: the tx buffer allocated for the test sequence + * @rx: the rx buffer allocated for the test sequence * * Returns: status code of spi_sync or other failures */ diff --git a/drivers/spi/spi-mem.c b/drivers/spi/spi-mem.c index 9a86cc27fcc0..ef53290b7d24 100644 --- a/drivers/spi/spi-mem.c +++ b/drivers/spi/spi-mem.c @@ -156,6 +156,12 @@ bool spi_mem_default_supports_op(struct spi_mem *mem, op->data.dir == SPI_MEM_DATA_OUT)) return false; + if (op->cmd.dtr || op->addr.dtr || op->dummy.dtr || op->data.dtr) + return false; + + if (op->cmd.nbytes != 1) + return false; + return true; } EXPORT_SYMBOL_GPL(spi_mem_default_supports_op); @@ -170,7 +176,7 @@ static bool spi_mem_buswidth_is_valid(u8 buswidth) static int spi_mem_check_op(const struct spi_mem_op *op) { - if (!op->cmd.buswidth) + if (!op->cmd.buswidth || !op->cmd.nbytes) return -EINVAL; if ((op->addr.nbytes && !op->addr.buswidth) || @@ -306,8 +312,7 @@ int spi_mem_exec_op(struct spi_mem *mem, const struct spi_mem_op *op) return ret; } - tmpbufsize = sizeof(op->cmd.opcode) + op->addr.nbytes + - op->dummy.nbytes; + tmpbufsize = op->cmd.nbytes + op->addr.nbytes + op->dummy.nbytes; /* * Allocate a buffer to transmit the CMD, ADDR cycles with kmalloc() so @@ -322,7 +327,7 @@ int spi_mem_exec_op(struct spi_mem *mem, const struct spi_mem_op *op) tmpbuf[0] = op->cmd.opcode; xfers[xferpos].tx_buf = tmpbuf; - xfers[xferpos].len = sizeof(op->cmd.opcode); + xfers[xferpos].len = op->cmd.nbytes; xfers[xferpos].tx_nbits = op->cmd.buswidth; spi_message_add_tail(&xfers[xferpos], &msg); xferpos++; @@ -424,8 +429,7 @@ int spi_mem_adjust_op_size(struct spi_mem *mem, struct spi_mem_op *op) return ctlr->mem_ops->adjust_op_size(mem, op); if (!ctlr->mem_ops || !ctlr->mem_ops->exec_op) { - len = sizeof(op->cmd.opcode) + op->addr.nbytes + - op->dummy.nbytes; + len = op->cmd.nbytes + op->addr.nbytes + op->dummy.nbytes; if (len > spi_max_transfer_size(mem->spi)) return -EINVAL; diff --git a/drivers/spi/spi-meson-spicc.c b/drivers/spi/spi-meson-spicc.c index 77f7d0e0e46a..ecba6b4a5d85 100644 --- a/drivers/spi/spi-meson-spicc.c +++ b/drivers/spi/spi-meson-spicc.c @@ -362,8 +362,6 @@ static void meson_spicc_setup_xfer(struct meson_spicc_device *spicc, static void meson_spicc_reset_fifo(struct meson_spicc_device *spicc) { - u32 data; - if (spicc->data->has_oen) writel_bits_relaxed(SPICC_ENH_MAIN_CLK_AO, SPICC_ENH_MAIN_CLK_AO, @@ -373,7 +371,7 @@ static void meson_spicc_reset_fifo(struct meson_spicc_device *spicc) spicc->base + SPICC_TESTREG); while (meson_spicc_rxready(spicc)) - data = readl_relaxed(spicc->base + SPICC_RXDATA); + readl_relaxed(spicc->base + SPICC_RXDATA); if (spicc->data->has_oen) writel_bits_relaxed(SPICC_ENH_MAIN_CLK_AO, 0, diff --git a/drivers/spi/spi-meson-spifc.c b/drivers/spi/spi-meson-spifc.c index c7b039980291..8eca6f24cb79 100644 --- a/drivers/spi/spi-meson-spifc.c +++ b/drivers/spi/spi-meson-spifc.c @@ -70,7 +70,7 @@ * @master: the SPI master * @regmap: regmap for device registers * @clk: input clock of the built-in baud rate generator - * @device: the device structure + * @dev: the device structure */ struct meson_spifc { struct spi_master *master; diff --git a/drivers/spi/spi-mt65xx.c b/drivers/spi/spi-mt65xx.c index a556795caeef..5d643051bf3d 100644 --- a/drivers/spi/spi-mt65xx.c +++ b/drivers/spi/spi-mt65xx.c @@ -171,6 +171,9 @@ static const struct of_device_id mtk_spi_of_match[] = { { .compatible = "mediatek,mt8183-spi", .data = (void *)&mt8183_compat, }, + { .compatible = "mediatek,mt8192-spi", + .data = (void *)&mt6765_compat, + }, {} }; MODULE_DEVICE_TABLE(of, mtk_spi_of_match); diff --git a/drivers/spi/spi-mtk-nor.c b/drivers/spi/spi-mtk-nor.c index 7bc302b50396..b08d8e9a8ee9 100644 --- a/drivers/spi/spi-mtk-nor.c +++ b/drivers/spi/spi-mtk-nor.c @@ -195,7 +195,7 @@ static int mtk_nor_adjust_op_size(struct spi_mem *mem, struct spi_mem_op *op) } } - len = MTK_NOR_PRG_MAX_SIZE - sizeof(op->cmd.opcode) - op->addr.nbytes - + len = MTK_NOR_PRG_MAX_SIZE - op->cmd.nbytes - op->addr.nbytes - op->dummy.nbytes; if (op->data.nbytes > len) op->data.nbytes = len; @@ -211,6 +211,12 @@ static bool mtk_nor_supports_op(struct spi_mem *mem, if (op->cmd.buswidth != 1) return false; + /* DTR ops not supported. */ + if (op->cmd.dtr || op->addr.dtr || op->dummy.dtr || op->data.dtr) + return false; + if (op->cmd.nbytes != 1) + return false; + if ((op->addr.nbytes == 3) || (op->addr.nbytes == 4)) { if ((op->data.dir == SPI_MEM_DATA_IN) && mtk_nor_match_read(op)) return true; @@ -219,7 +225,7 @@ static bool mtk_nor_supports_op(struct spi_mem *mem, (op->dummy.buswidth == 0) && (op->data.buswidth == 1); } - len = sizeof(op->cmd.opcode) + op->addr.nbytes + op->dummy.nbytes; + len = op->cmd.nbytes + op->addr.nbytes + op->dummy.nbytes; if ((len > MTK_NOR_PRG_MAX_SIZE) || ((op->data.nbytes) && (len == MTK_NOR_PRG_MAX_SIZE))) return false; diff --git a/drivers/spi/spi-mxic.c b/drivers/spi/spi-mxic.c index 69491f3a515d..8c630acb0110 100644 --- a/drivers/spi/spi-mxic.c +++ b/drivers/spi/spi-mxic.c @@ -356,6 +356,7 @@ static int mxic_spi_mem_exec_op(struct spi_mem *mem, int nio = 1, i, ret; u32 ss_ctrl; u8 addr[8]; + u8 opcode = op->cmd.opcode; ret = mxic_spi_set_freq(mxic, mem->spi->max_speed_hz); if (ret) @@ -393,7 +394,7 @@ static int mxic_spi_mem_exec_op(struct spi_mem *mem, writel(readl(mxic->regs + HC_CFG) | HC_CFG_MAN_CS_ASSERT, mxic->regs + HC_CFG); - ret = mxic_spi_data_xfer(mxic, &op->cmd.opcode, NULL, 1); + ret = mxic_spi_data_xfer(mxic, &opcode, NULL, 1); if (ret) goto out; diff --git a/drivers/spi/spi-npcm-fiu.c b/drivers/spi/spi-npcm-fiu.c index d25ee32862e0..9468e71f03ad 100644 --- a/drivers/spi/spi-npcm-fiu.c +++ b/drivers/spi/spi-npcm-fiu.c @@ -1,6 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 // Copyright (c) 2019 Nuvoton Technology corporation. +#include <linux/bits.h> #include <linux/init.h> #include <linux/kernel.h> #include <linux/device.h> @@ -177,7 +178,6 @@ enum { #define MAP_SIZE_16MB 0x1000000 #define MAP_SIZE_8MB 0x800000 -#define NUM_BITS_IN_BYTE 8 #define FIU_DRD_MAX_DUMMY_NUMBER 3 #define NPCM_MAX_CHIP_NUM 4 #define CHUNK_SIZE 16 @@ -252,8 +252,8 @@ static void npcm_fiu_set_drd(struct npcm_fiu_spi *fiu, fiu->drd_op.addr.buswidth = op->addr.buswidth; regmap_update_bits(fiu->regmap, NPCM_FIU_DRD_CFG, NPCM_FIU_DRD_CFG_DBW, - ((op->dummy.nbytes * ilog2(op->addr.buswidth)) - / NUM_BITS_IN_BYTE) << NPCM_FIU_DRD_DBW_SHIFT); + ((op->dummy.nbytes * ilog2(op->addr.buswidth)) / BITS_PER_BYTE) + << NPCM_FIU_DRD_DBW_SHIFT); fiu->drd_op.dummy.nbytes = op->dummy.nbytes; regmap_update_bits(fiu->regmap, NPCM_FIU_DRD_CFG, NPCM_FIU_DRD_CFG_RDCMD, op->cmd.opcode); diff --git a/drivers/spi/spi-npcm-pspi.c b/drivers/spi/spi-npcm-pspi.c index 87cd0233c60b..56d10c4511db 100644 --- a/drivers/spi/spi-npcm-pspi.c +++ b/drivers/spi/spi-npcm-pspi.c @@ -10,8 +10,6 @@ #include <linux/module.h> #include <linux/platform_device.h> #include <linux/spi/spi.h> -#include <linux/gpio.h> -#include <linux/of_gpio.h> #include <linux/reset.h> #include <asm/unaligned.h> @@ -344,16 +342,9 @@ static int npcm_pspi_probe(struct platform_device *pdev) struct npcm_pspi *priv; struct spi_master *master; unsigned long clk_hz; - struct device_node *np = pdev->dev.of_node; - int num_cs, i; - int csgpio; int irq; int ret; - num_cs = of_gpio_named_count(np, "cs-gpios"); - if (num_cs < 0) - return num_cs; - master = spi_alloc_master(&pdev->dev, sizeof(*priv)); if (!master) return -ENOMEM; @@ -418,24 +409,7 @@ static int npcm_pspi_probe(struct platform_device *pdev) npcm_pspi_prepare_transfer_hardware; master->unprepare_transfer_hardware = npcm_pspi_unprepare_transfer_hardware; - master->num_chipselect = num_cs; - - for (i = 0; i < num_cs; i++) { - csgpio = of_get_named_gpio(np, "cs-gpios", i); - if (csgpio < 0) { - dev_err(&pdev->dev, "failed to get csgpio#%u\n", i); - goto out_disable_clk; - } - dev_dbg(&pdev->dev, "csgpio#%u = %d\n", i, csgpio); - ret = devm_gpio_request_one(&pdev->dev, csgpio, - GPIOF_OUT_INIT_HIGH, DRIVER_NAME); - if (ret < 0) { - dev_err(&pdev->dev, - "failed to configure csgpio#%u %d\n" - , i, csgpio); - goto out_disable_clk; - } - } + master->use_gpio_descriptors = true; /* set to default clock rate */ npcm_pspi_set_baudrate(priv, NPCM_PSPI_DEFAULT_CLK); diff --git a/drivers/spi/spi-oc-tiny.c b/drivers/spi/spi-oc-tiny.c index 9df7c5979c29..f3843f0ff260 100644 --- a/drivers/spi/spi-oc-tiny.c +++ b/drivers/spi/spi-oc-tiny.c @@ -2,7 +2,7 @@ /* * OpenCores tiny SPI master driver * - * http://opencores.org/project,tiny_spi + * https://opencores.org/project,tiny_spi * * Copyright (C) 2011 Thomas Chou <thomas@wytron.com.tw> * diff --git a/drivers/spi/spi-omap-100k.c b/drivers/spi/spi-omap-100k.c index 5c704ba6d8ea..36a4922a134a 100644 --- a/drivers/spi/spi-omap-100k.c +++ b/drivers/spi/spi-omap-100k.c @@ -19,7 +19,6 @@ #include <linux/err.h> #include <linux/clk.h> #include <linux/io.h> -#include <linux/gpio.h> #include <linux/slab.h> #include <linux/spi/spi.h> diff --git a/drivers/spi/spi-omap-uwire.c b/drivers/spi/spi-omap-uwire.c index ce8dbdbce312..71402f71ddd8 100644 --- a/drivers/spi/spi-omap-uwire.c +++ b/drivers/spi/spi-omap-uwire.c @@ -443,7 +443,7 @@ static void uwire_cleanup(struct spi_device *spi) static void uwire_off(struct uwire_spi *uwire) { uwire_write_reg(UWIRE_SR3, 0); - clk_disable(uwire->ck); + clk_disable_unprepare(uwire->ck); spi_master_put(uwire->bitbang.master); } @@ -475,7 +475,7 @@ static int uwire_probe(struct platform_device *pdev) spi_master_put(master); return status; } - clk_enable(uwire->ck); + clk_prepare_enable(uwire->ck); if (cpu_is_omap7xx()) uwire_idx_shift = 1; diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c index e9e256718ef4..1c9478e6e5d9 100644 --- a/drivers/spi/spi-omap2-mcspi.c +++ b/drivers/spi/spi-omap2-mcspi.c @@ -27,7 +27,6 @@ #include <linux/iopoll.h> #include <linux/spi/spi.h> -#include <linux/gpio.h> #include <linux/platform_data/spi-omap2-mcspi.h> @@ -1043,16 +1042,6 @@ static int omap2_mcspi_setup(struct spi_device *spi) spi->controller_state = cs; /* Link this to context save list */ list_add_tail(&cs->node, &ctx->cs); - - if (gpio_is_valid(spi->cs_gpio)) { - ret = gpio_request(spi->cs_gpio, dev_name(&spi->dev)); - if (ret) { - dev_err(&spi->dev, "failed to request gpio\n"); - return ret; - } - gpio_direction_output(spi->cs_gpio, - !(spi->mode & SPI_CS_HIGH)); - } } ret = pm_runtime_get_sync(mcspi->dev); @@ -1080,9 +1069,6 @@ static void omap2_mcspi_cleanup(struct spi_device *spi) kfree(cs); } - - if (gpio_is_valid(spi->cs_gpio)) - gpio_free(spi->cs_gpio); } static irqreturn_t omap2_mcspi_irq_handler(int irq, void *data) @@ -1152,7 +1138,7 @@ static int omap2_mcspi_transfer_one(struct spi_master *master, omap2_mcspi_set_enable(spi, 0); - if (gpio_is_valid(spi->cs_gpio)) + if (spi->cs_gpiod) omap2_mcspi_set_cs(spi, spi->mode & SPI_CS_HIGH); if (par_override || @@ -1241,7 +1227,7 @@ out: omap2_mcspi_set_enable(spi, 0); - if (gpio_is_valid(spi->cs_gpio)) + if (spi->cs_gpiod) omap2_mcspi_set_cs(spi, !(spi->mode & SPI_CS_HIGH)); if (mcspi->fifo_depth > 0 && t) @@ -1431,6 +1417,7 @@ static int omap2_mcspi_probe(struct platform_device *pdev) master->dev.of_node = node; master->max_speed_hz = OMAP2_MCSPI_MAX_FREQ; master->min_speed_hz = OMAP2_MCSPI_MAX_FREQ >> 15; + master->use_gpio_descriptors = true; platform_set_drvdata(pdev, master); diff --git a/drivers/spi/spi-orion.c b/drivers/spi/spi-orion.c index 43f73db22f21..b57b8b3cc26e 100644 --- a/drivers/spi/spi-orion.c +++ b/drivers/spi/spi-orion.c @@ -708,7 +708,7 @@ static int orion_spi_probe(struct platform_device *pdev) /* * Only map one page for direct access. This is enough for the * simple TX transfer which only writes to the first word. - * This needs to get extended for the direct SPI-NOR / SPI-NAND + * This needs to get extended for the direct SPI NOR / SPI NAND * support, once this gets implemented. */ dir_acc = &spi->child[cs].direct_access; diff --git a/drivers/spi/spi-pl022.c b/drivers/spi/spi-pl022.c index 66028ebbc336..d1776fea287e 100644 --- a/drivers/spi/spi-pl022.c +++ b/drivers/spi/spi-pl022.c @@ -298,7 +298,7 @@ enum ssp_reading { READING_U32 }; -/** +/* * The type of writing going on on this chip */ enum ssp_writing { @@ -317,6 +317,7 @@ enum ssp_writing { * @extended_cr: 32 bit wide control register 0 with extra * features and extra features in CR1 as found in the ST variants * @pl023: supports a subset of the ST extensions called "PL023" + * @loopback: supports loopback mode * @internal_cs_ctrl: supports chip select control register */ struct vendor_data { @@ -353,11 +354,14 @@ struct vendor_data { * @read: the type of read currently going on * @write: the type of write currently going on * @exp_fifo_level: expected FIFO level + * @rx_lev_trig: receive FIFO watermark level which triggers IRQ + * @tx_lev_trig: transmit FIFO watermark level which triggers IRQ * @dma_rx_channel: optional channel for RX DMA * @dma_tx_channel: optional channel for TX DMA * @sgt_rx: scattertable for the RX transfer * @sgt_tx: scattertable for the TX transfer * @dummypage: a dummy page used for driving data on the bus with DMA + * @dma_running: indicates whether DMA is in operation * @cur_cs: current chip select (gpio) * @chipselects: list of chipselects (gpios) */ @@ -662,7 +666,7 @@ static void load_ssp_default_config(struct pl022 *pl022) writew(CLEAR_ALL_INTERRUPTS, SSP_ICR(pl022->virtbase)); } -/** +/* * This will write to TX and read from RX according to the parameters * set in pl022. */ @@ -1237,6 +1241,8 @@ static inline void pl022_dma_remove(struct pl022 *pl022) /** * pl022_interrupt_handler - Interrupt handler for SSP controller + * @irq: IRQ number + * @dev_id: Local device data * * This function handles interrupts generated for an interrupt based transfer. * If a receive overrun (ROR) interrupt is there then we disable SSP, flag the @@ -1334,7 +1340,7 @@ static irqreturn_t pl022_interrupt_handler(int irq, void *dev_id) return IRQ_HANDLED; } -/** +/* * This sets up the pointers to memory for the next message to * send out on the SPI bus. */ diff --git a/drivers/spi/spi-ppc4xx.c b/drivers/spi/spi-ppc4xx.c index 0ea2d9a369d9..d8ee363fb714 100644 --- a/drivers/spi/spi-ppc4xx.c +++ b/drivers/spi/spi-ppc4xx.c @@ -28,11 +28,9 @@ #include <linux/of_address.h> #include <linux/of_irq.h> #include <linux/of_platform.h> -#include <linux/of_gpio.h> #include <linux/interrupt.h> #include <linux/delay.h> -#include <linux/gpio.h> #include <linux/spi/spi.h> #include <linux/spi/spi_bitbang.h> @@ -127,8 +125,6 @@ struct ppc4xx_spi { const unsigned char *tx; unsigned char *rx; - int *gpios; - struct spi_ppc4xx_regs __iomem *regs; /* pointer to the registers */ struct spi_master *master; struct device *dev; @@ -260,27 +256,6 @@ static int spi_ppc4xx_setup(struct spi_device *spi) return 0; } -static void spi_ppc4xx_chipsel(struct spi_device *spi, int value) -{ - struct ppc4xx_spi *hw = spi_master_get_devdata(spi->master); - unsigned int cs = spi->chip_select; - unsigned int cspol; - - /* - * If there are no chip selects at all, or if this is the special - * case of a non-existent (dummy) chip select, do nothing. - */ - - if (!hw->master->num_chipselect || hw->gpios[cs] == -EEXIST) - return; - - cspol = spi->mode & SPI_CS_HIGH ? 1 : 0; - if (value == BITBANG_CS_INACTIVE) - cspol = !cspol; - - gpio_set_value(hw->gpios[cs], cspol); -} - static irqreturn_t spi_ppc4xx_int(int irq, void *dev_id) { struct ppc4xx_spi *hw; @@ -359,19 +334,6 @@ static void spi_ppc4xx_enable(struct ppc4xx_spi *hw) dcri_clrset(SDR0, SDR0_PFC1, 0x80000000 >> 14, 0); } -static void free_gpios(struct ppc4xx_spi *hw) -{ - if (hw->master->num_chipselect) { - int i; - for (i = 0; i < hw->master->num_chipselect; i++) - if (gpio_is_valid(hw->gpios[i])) - gpio_free(hw->gpios[i]); - - kfree(hw->gpios); - hw->gpios = NULL; - } -} - /* * platform_device layer stuff... */ @@ -385,7 +347,6 @@ static int spi_ppc4xx_of_probe(struct platform_device *op) struct device *dev = &op->dev; struct device_node *opbnp; int ret; - int num_gpios; const unsigned int *clk; master = spi_alloc_master(dev, sizeof *hw); @@ -399,74 +360,32 @@ static int spi_ppc4xx_of_probe(struct platform_device *op) init_completion(&hw->done); - /* - * A count of zero implies a single SPI device without any chip-select. - * Note that of_gpio_count counts all gpios assigned to this spi master. - * This includes both "null" gpio's and real ones. - */ - num_gpios = of_gpio_count(np); - if (num_gpios > 0) { - int i; - - hw->gpios = kcalloc(num_gpios, sizeof(*hw->gpios), GFP_KERNEL); - if (!hw->gpios) { - ret = -ENOMEM; - goto free_master; - } - - for (i = 0; i < num_gpios; i++) { - int gpio; - enum of_gpio_flags flags; - - gpio = of_get_gpio_flags(np, i, &flags); - hw->gpios[i] = gpio; - - if (gpio_is_valid(gpio)) { - /* Real CS - set the initial state. */ - ret = gpio_request(gpio, np->name); - if (ret < 0) { - dev_err(dev, - "can't request gpio #%d: %d\n", - i, ret); - goto free_gpios; - } - - gpio_direction_output(gpio, - !!(flags & OF_GPIO_ACTIVE_LOW)); - } else if (gpio == -EEXIST) { - ; /* No CS, but that's OK. */ - } else { - dev_err(dev, "invalid gpio #%d: %d\n", i, gpio); - ret = -EINVAL; - goto free_gpios; - } - } - } - /* Setup the state for the bitbang driver */ bbp = &hw->bitbang; bbp->master = hw->master; bbp->setup_transfer = spi_ppc4xx_setupxfer; - bbp->chipselect = spi_ppc4xx_chipsel; bbp->txrx_bufs = spi_ppc4xx_txrx; bbp->use_dma = 0; bbp->master->setup = spi_ppc4xx_setup; bbp->master->cleanup = spi_ppc4xx_cleanup; bbp->master->bits_per_word_mask = SPI_BPW_MASK(8); + bbp->master->use_gpio_descriptors = true; + /* + * The SPI core will count the number of GPIO descriptors to figure + * out the number of chip selects available on the platform. + */ + bbp->master->num_chipselect = 0; /* the spi->mode bits understood by this driver: */ bbp->master->mode_bits = SPI_CPHA | SPI_CPOL | SPI_CS_HIGH | SPI_LSB_FIRST; - /* this many pins in all GPIO controllers */ - bbp->master->num_chipselect = num_gpios > 0 ? num_gpios : 0; - /* Get the clock for the OPB */ opbnp = of_find_compatible_node(NULL, NULL, "ibm,opb"); if (opbnp == NULL) { dev_err(dev, "OPB: cannot find node\n"); ret = -ENODEV; - goto free_gpios; + goto free_master; } /* Get the clock (Hz) for the OPB */ clk = of_get_property(opbnp, "clock-frequency", NULL); @@ -474,7 +393,7 @@ static int spi_ppc4xx_of_probe(struct platform_device *op) dev_err(dev, "OPB: no clock-frequency property set\n"); of_node_put(opbnp); ret = -ENODEV; - goto free_gpios; + goto free_master; } hw->opb_freq = *clk; hw->opb_freq >>= 2; @@ -483,7 +402,7 @@ static int spi_ppc4xx_of_probe(struct platform_device *op) ret = of_address_to_resource(np, 0, &resource); if (ret) { dev_err(dev, "error while parsing device node resource\n"); - goto free_gpios; + goto free_master; } hw->mapbase = resource.start; hw->mapsize = resource_size(&resource); @@ -492,7 +411,7 @@ static int spi_ppc4xx_of_probe(struct platform_device *op) if (hw->mapsize < sizeof(struct spi_ppc4xx_regs)) { dev_err(dev, "too small to map registers\n"); ret = -EINVAL; - goto free_gpios; + goto free_master; } /* Request IRQ */ @@ -501,7 +420,7 @@ static int spi_ppc4xx_of_probe(struct platform_device *op) 0, "spi_ppc4xx_of", (void *)hw); if (ret) { dev_err(dev, "unable to allocate interrupt\n"); - goto free_gpios; + goto free_master; } if (!request_mem_region(hw->mapbase, hw->mapsize, DRIVER_NAME)) { @@ -538,8 +457,6 @@ map_io_error: release_mem_region(hw->mapbase, hw->mapsize); request_mem_error: free_irq(hw->irqnum, hw); -free_gpios: - free_gpios(hw); free_master: spi_master_put(master); @@ -556,7 +473,6 @@ static int spi_ppc4xx_of_remove(struct platform_device *op) release_mem_region(hw->mapbase, hw->mapsize); free_irq(hw->irqnum, hw); iounmap(hw->regs); - free_gpios(hw); spi_master_put(master); return 0; } diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c index 0040362b7162..814268405ab0 100644 --- a/drivers/spi/spi-pxa2xx.c +++ b/drivers/spi/spi-pxa2xx.c @@ -1432,6 +1432,7 @@ static void cleanup(struct spi_device *spi) kfree(chip); } +#ifdef CONFIG_ACPI static const struct acpi_device_id pxa2xx_spi_acpi_match[] = { { "INT33C0", LPSS_LPT_SSP }, { "INT33C1", LPSS_LPT_SSP }, @@ -1442,6 +1443,7 @@ static const struct acpi_device_id pxa2xx_spi_acpi_match[] = { { }, }; MODULE_DEVICE_TABLE(acpi, pxa2xx_spi_acpi_match); +#endif /* * PCI IDs of compound devices that integrate both host controller and private diff --git a/drivers/spi/spi-rockchip.c b/drivers/spi/spi-rockchip.c index 9b8a5e1233c0..75a8a9428ff8 100644 --- a/drivers/spi/spi-rockchip.c +++ b/drivers/spi/spi-rockchip.c @@ -39,8 +39,9 @@ #define ROCKCHIP_SPI_RISR 0x0034 #define ROCKCHIP_SPI_ICR 0x0038 #define ROCKCHIP_SPI_DMACR 0x003c -#define ROCKCHIP_SPI_DMATDLR 0x0040 -#define ROCKCHIP_SPI_DMARDLR 0x0044 +#define ROCKCHIP_SPI_DMATDLR 0x0040 +#define ROCKCHIP_SPI_DMARDLR 0x0044 +#define ROCKCHIP_SPI_VERSION 0x0048 #define ROCKCHIP_SPI_TXDR 0x0400 #define ROCKCHIP_SPI_RXDR 0x0800 @@ -156,6 +157,8 @@ #define ROCKCHIP_SPI_MAX_TRANLEN 0xffff #define ROCKCHIP_SPI_MAX_CS_NUM 2 +#define ROCKCHIP_SPI_VER2_TYPE1 0x05EC0002 +#define ROCKCHIP_SPI_VER2_TYPE2 0x00110002 struct rockchip_spi { struct device *dev; @@ -206,17 +209,17 @@ static inline void wait_for_idle(struct rockchip_spi *rs) static u32 get_fifo_len(struct rockchip_spi *rs) { - u32 fifo; + u32 ver; - for (fifo = 2; fifo < 32; fifo++) { - writel_relaxed(fifo, rs->regs + ROCKCHIP_SPI_TXFTLR); - if (fifo != readl_relaxed(rs->regs + ROCKCHIP_SPI_TXFTLR)) - break; - } - - writel_relaxed(0, rs->regs + ROCKCHIP_SPI_TXFTLR); + ver = readl_relaxed(rs->regs + ROCKCHIP_SPI_VERSION); - return (fifo == 31) ? 0 : fifo; + switch (ver) { + case ROCKCHIP_SPI_VER2_TYPE1: + case ROCKCHIP_SPI_VER2_TYPE2: + return 64; + default: + return 32; + } } static void rockchip_spi_set_cs(struct spi_device *spi, bool enable) @@ -288,7 +291,7 @@ static void rockchip_spi_pio_writer(struct rockchip_spi *rs) static void rockchip_spi_pio_reader(struct rockchip_spi *rs) { u32 words = readl_relaxed(rs->regs + ROCKCHIP_SPI_RXFLR); - u32 rx_left = rs->rx_left - words; + u32 rx_left = (rs->rx_left > words) ? rs->rx_left - words : 0; /* the hardware doesn't allow us to change fifo threshold * level while spi is enabled, so instead make sure to leave @@ -384,6 +387,19 @@ static void rockchip_spi_dma_txcb(void *data) spi_finalize_current_transfer(ctlr); } +static u32 rockchip_spi_calc_burst_size(u32 data_len) +{ + u32 i; + + /* burst size: 1, 2, 4, 8 */ + for (i = 1; i < 8; i <<= 1) { + if (data_len & i) + break; + } + + return i; +} + static int rockchip_spi_prepare_dma(struct rockchip_spi *rs, struct spi_controller *ctlr, struct spi_transfer *xfer) { @@ -397,7 +413,8 @@ static int rockchip_spi_prepare_dma(struct rockchip_spi *rs, .direction = DMA_DEV_TO_MEM, .src_addr = rs->dma_addr_rx, .src_addr_width = rs->n_bytes, - .src_maxburst = 1, + .src_maxburst = rockchip_spi_calc_burst_size(xfer->len / + rs->n_bytes), }; dmaengine_slave_config(ctlr->dma_rx, &rxconf); @@ -525,7 +542,8 @@ static void rockchip_spi_config(struct rockchip_spi *rs, writel_relaxed(rs->fifo_len / 2 - 1, rs->regs + ROCKCHIP_SPI_RXFTLR); writel_relaxed(rs->fifo_len / 2, rs->regs + ROCKCHIP_SPI_DMATDLR); - writel_relaxed(0, rs->regs + ROCKCHIP_SPI_DMARDLR); + writel_relaxed(rockchip_spi_calc_burst_size(xfer->len / rs->n_bytes) - 1, + rs->regs + ROCKCHIP_SPI_DMARDLR); writel_relaxed(dmacr, rs->regs + ROCKCHIP_SPI_DMACR); /* the hardware only supports an even clock divisor, so diff --git a/drivers/spi/spi-rpc-if.c b/drivers/spi/spi-rpc-if.c new file mode 100644 index 000000000000..ed3e548227f4 --- /dev/null +++ b/drivers/spi/spi-rpc-if.c @@ -0,0 +1,216 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// RPC-IF SPI/QSPI/Octa driver +// +// Copyright (C) 2018 ~ 2019 Renesas Solutions Corp. +// Copyright (C) 2019 Macronix International Co., Ltd. +// Copyright (C) 2019 - 2020 Cogent Embedded, Inc. +// + +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/spi/spi.h> +#include <linux/spi/spi-mem.h> + +#include <memory/renesas-rpc-if.h> + +#include <asm/unaligned.h> + +static void rpcif_spi_mem_prepare(struct spi_device *spi_dev, + const struct spi_mem_op *spi_op, + u64 *offs, size_t *len) +{ + struct rpcif *rpc = spi_controller_get_devdata(spi_dev->controller); + struct rpcif_op rpc_op = { }; + + rpc_op.cmd.opcode = spi_op->cmd.opcode; + rpc_op.cmd.buswidth = spi_op->cmd.buswidth; + + if (spi_op->addr.nbytes) { + rpc_op.addr.buswidth = spi_op->addr.buswidth; + rpc_op.addr.nbytes = spi_op->addr.nbytes; + rpc_op.addr.val = spi_op->addr.val; + } + + if (spi_op->dummy.nbytes) { + rpc_op.dummy.buswidth = spi_op->dummy.buswidth; + rpc_op.dummy.ncycles = spi_op->dummy.nbytes * 8 / + spi_op->dummy.buswidth; + } + + if (spi_op->data.nbytes || (offs && len)) { + rpc_op.data.buswidth = spi_op->data.buswidth; + rpc_op.data.nbytes = spi_op->data.nbytes; + switch (spi_op->data.dir) { + case SPI_MEM_DATA_IN: + rpc_op.data.dir = RPCIF_DATA_IN; + rpc_op.data.buf.in = spi_op->data.buf.in; + break; + case SPI_MEM_DATA_OUT: + rpc_op.data.dir = RPCIF_DATA_OUT; + rpc_op.data.buf.out = spi_op->data.buf.out; + break; + case SPI_MEM_NO_DATA: + rpc_op.data.dir = RPCIF_NO_DATA; + break; + } + } else { + rpc_op.data.dir = RPCIF_NO_DATA; + } + + rpcif_prepare(rpc, &rpc_op, offs, len); +} + +static bool rpcif_spi_mem_supports_op(struct spi_mem *mem, + const struct spi_mem_op *op) +{ + if (!spi_mem_default_supports_op(mem, op)) + return false; + + if (op->data.buswidth > 4 || op->addr.buswidth > 4 || + op->dummy.buswidth > 4 || op->cmd.buswidth > 4 || + op->addr.nbytes > 4) + return false; + + return true; +} + +static ssize_t rpcif_spi_mem_dirmap_read(struct spi_mem_dirmap_desc *desc, + u64 offs, size_t len, void *buf) +{ + struct rpcif *rpc = + spi_controller_get_devdata(desc->mem->spi->controller); + + if (offs + desc->info.offset + len > U32_MAX) + return -EINVAL; + + rpcif_spi_mem_prepare(desc->mem->spi, &desc->info.op_tmpl, &offs, &len); + + return rpcif_dirmap_read(rpc, offs, len, buf); +} + +static int rpcif_spi_mem_dirmap_create(struct spi_mem_dirmap_desc *desc) +{ + struct rpcif *rpc = + spi_controller_get_devdata(desc->mem->spi->controller); + + if (desc->info.offset + desc->info.length > U32_MAX) + return -ENOTSUPP; + + if (!rpcif_spi_mem_supports_op(desc->mem, &desc->info.op_tmpl)) + return -ENOTSUPP; + + if (!rpc->dirmap && desc->info.op_tmpl.data.dir == SPI_MEM_DATA_IN) + return -ENOTSUPP; + + if (desc->info.op_tmpl.data.dir == SPI_MEM_DATA_OUT) + return -ENOTSUPP; + + return 0; +} + +static int rpcif_spi_mem_exec_op(struct spi_mem *mem, + const struct spi_mem_op *op) +{ + struct rpcif *rpc = + spi_controller_get_devdata(mem->spi->controller); + + rpcif_spi_mem_prepare(mem->spi, op, NULL, NULL); + + return rpcif_manual_xfer(rpc); +} + +static const struct spi_controller_mem_ops rpcif_spi_mem_ops = { + .supports_op = rpcif_spi_mem_supports_op, + .exec_op = rpcif_spi_mem_exec_op, + .dirmap_create = rpcif_spi_mem_dirmap_create, + .dirmap_read = rpcif_spi_mem_dirmap_read, +}; + +static int rpcif_spi_probe(struct platform_device *pdev) +{ + struct device *parent = pdev->dev.parent; + struct spi_controller *ctlr; + struct rpcif *rpc; + int error; + + ctlr = spi_alloc_master(&pdev->dev, sizeof(*rpc)); + if (!ctlr) + return -ENOMEM; + + rpc = spi_controller_get_devdata(ctlr); + rpcif_sw_init(rpc, parent); + + platform_set_drvdata(pdev, ctlr); + + ctlr->dev.of_node = parent->of_node; + + rpcif_enable_rpm(rpc); + + ctlr->num_chipselect = 1; + ctlr->mem_ops = &rpcif_spi_mem_ops; + + ctlr->bits_per_word_mask = SPI_BPW_MASK(8); + ctlr->mode_bits = SPI_CPOL | SPI_CPHA | SPI_TX_QUAD | SPI_RX_QUAD; + ctlr->flags = SPI_CONTROLLER_HALF_DUPLEX; + + rpcif_hw_init(rpc, false); + + error = spi_register_controller(ctlr); + if (error) { + dev_err(&pdev->dev, "spi_register_controller failed\n"); + goto err_put_ctlr; + } + return 0; + +err_put_ctlr: + rpcif_disable_rpm(rpc); + spi_controller_put(ctlr); + + return error; +} + +static int rpcif_spi_remove(struct platform_device *pdev) +{ + struct spi_controller *ctlr = platform_get_drvdata(pdev); + struct rpcif *rpc = spi_controller_get_devdata(ctlr); + + spi_unregister_controller(ctlr); + rpcif_disable_rpm(rpc); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int rpcif_spi_suspend(struct device *dev) +{ + struct spi_controller *ctlr = dev_get_drvdata(dev); + + return spi_controller_suspend(ctlr); +} + +static int rpcif_spi_resume(struct device *dev) +{ + struct spi_controller *ctlr = dev_get_drvdata(dev); + + return spi_controller_resume(ctlr); +} + +static SIMPLE_DEV_PM_OPS(rpcif_spi_pm_ops, rpcif_spi_suspend, rpcif_spi_resume); +#define DEV_PM_OPS (&rpcif_spi_pm_ops) +#else +#define DEV_PM_OPS NULL +#endif + +static struct platform_driver rpcif_spi_driver = { + .probe = rpcif_spi_probe, + .remove = rpcif_spi_remove, + .driver = { + .name = "rpc-if-spi", + .pm = DEV_PM_OPS, + }, +}; +module_platform_driver(rpcif_spi_driver); + +MODULE_DESCRIPTION("Renesas RPC-IF SPI driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c index cf67ea60dc0e..924b24441789 100644 --- a/drivers/spi/spi-s3c64xx.c +++ b/drivers/spi/spi-s3c64xx.c @@ -130,9 +130,11 @@ struct s3c64xx_spi_dma_data { * @fifo_lvl_mask: Bit-mask for {TX|RX}_FIFO_LVL bits in SPI_STATUS register. * @rx_lvl_offset: Bit offset of RX_FIFO_LVL bits in SPI_STATUS regiter. * @tx_st_done: Bit offset of TX_DONE bit in SPI_STATUS regiter. + * @quirks: Bitmask of known quirks * @high_speed: True, if the controller supports HIGH_SPEED_EN bit. * @clk_from_cmu: True, if the controller does not include a clock mux and * prescaler unit. + * @clk_ioclk: True if clock is present on this device * * The Samsung s3c64xx SPI controller are used on various Samsung SoC's but * differ in some aspects such as the size of the fifo and spi bus clock @@ -154,6 +156,7 @@ struct s3c64xx_spi_port_config { * @clk: Pointer to the spi clock. * @src_clk: Pointer to the clock used to generate SPI signals. * @ioclk: Pointer to the i/o clock between master and slave + * @pdev: Pointer to device's platform device data * @master: Pointer to the SPI Protocol master. * @cntrlr_info: Platform specific data for the controller this driver manages. * @lock: Controller specific lock. @@ -166,7 +169,11 @@ struct s3c64xx_spi_port_config { * @xfer_completion: To indicate completion of xfer task. * @cur_mode: Stores the active configuration of the controller. * @cur_bpw: Stores the active bits per word settings. - * @cur_speed: Stores the active xfer clock speed. + * @cur_speed: Current clock speed + * @rx_dma: Local receive DMA data (e.g. chan and direction) + * @tx_dma: Local transmit DMA data (e.g. chan and direction) + * @port_conf: Local SPI port configuartion data + * @port_id: Port identification number */ struct s3c64xx_spi_driver_data { void __iomem *regs; diff --git a/drivers/spi/spi-sun4i.c b/drivers/spi/spi-sun4i.c index cbfac6596fad..1fdfc6e6691d 100644 --- a/drivers/spi/spi-sun4i.c +++ b/drivers/spi/spi-sun4i.c @@ -198,7 +198,7 @@ static void sun4i_spi_set_cs(struct spi_device *spi, bool enable) static size_t sun4i_spi_max_transfer_size(struct spi_device *spi) { - return SUN4I_FIFO_DEPTH - 1; + return SUN4I_MAX_XFER_SIZE - 1; } static int sun4i_spi_transfer_one(struct spi_master *master, diff --git a/drivers/spi/spi-sun6i.c b/drivers/spi/spi-sun6i.c index fa11cc0e809b..19238e1b76b4 100644 --- a/drivers/spi/spi-sun6i.c +++ b/drivers/spi/spi-sun6i.c @@ -7,6 +7,7 @@ * Maxime Ripard <maxime.ripard@free-electrons.com> */ +#include <linux/bitfield.h> #include <linux/clk.h> #include <linux/delay.h> #include <linux/device.h> @@ -58,10 +59,8 @@ #define SUN6I_FIFO_CTL_TF_RST BIT(31) #define SUN6I_FIFO_STA_REG 0x1c -#define SUN6I_FIFO_STA_RF_CNT_MASK 0x7f -#define SUN6I_FIFO_STA_RF_CNT_BITS 0 -#define SUN6I_FIFO_STA_TF_CNT_MASK 0x7f -#define SUN6I_FIFO_STA_TF_CNT_BITS 16 +#define SUN6I_FIFO_STA_RF_CNT_MASK GENMASK(7, 0) +#define SUN6I_FIFO_STA_TF_CNT_MASK GENMASK(23, 16) #define SUN6I_CLK_CTL_REG 0x24 #define SUN6I_CLK_CTL_CDR2_MASK 0xff @@ -73,13 +72,10 @@ #define SUN6I_MAX_XFER_SIZE 0xffffff #define SUN6I_BURST_CNT_REG 0x30 -#define SUN6I_BURST_CNT(cnt) ((cnt) & SUN6I_MAX_XFER_SIZE) #define SUN6I_XMIT_CNT_REG 0x34 -#define SUN6I_XMIT_CNT(cnt) ((cnt) & SUN6I_MAX_XFER_SIZE) #define SUN6I_BURST_CTL_CNT_REG 0x38 -#define SUN6I_BURST_CTL_CNT_STC(cnt) ((cnt) & SUN6I_MAX_XFER_SIZE) #define SUN6I_TXDATA_REG 0x200 #define SUN6I_RXDATA_REG 0x300 @@ -109,21 +105,18 @@ static inline void sun6i_spi_write(struct sun6i_spi *sspi, u32 reg, u32 value) writel(value, sspi->base_addr + reg); } -static inline u32 sun6i_spi_get_tx_fifo_count(struct sun6i_spi *sspi) +static inline u32 sun6i_spi_get_rx_fifo_count(struct sun6i_spi *sspi) { u32 reg = sun6i_spi_read(sspi, SUN6I_FIFO_STA_REG); - reg >>= SUN6I_FIFO_STA_TF_CNT_BITS; - - return reg & SUN6I_FIFO_STA_TF_CNT_MASK; + return FIELD_GET(SUN6I_FIFO_STA_RF_CNT_MASK, reg); } -static inline void sun6i_spi_enable_interrupt(struct sun6i_spi *sspi, u32 mask) +static inline u32 sun6i_spi_get_tx_fifo_count(struct sun6i_spi *sspi) { - u32 reg = sun6i_spi_read(sspi, SUN6I_INT_CTL_REG); + u32 reg = sun6i_spi_read(sspi, SUN6I_FIFO_STA_REG); - reg |= mask; - sun6i_spi_write(sspi, SUN6I_INT_CTL_REG, reg); + return FIELD_GET(SUN6I_FIFO_STA_TF_CNT_MASK, reg); } static inline void sun6i_spi_disable_interrupt(struct sun6i_spi *sspi, u32 mask) @@ -134,18 +127,13 @@ static inline void sun6i_spi_disable_interrupt(struct sun6i_spi *sspi, u32 mask) sun6i_spi_write(sspi, SUN6I_INT_CTL_REG, reg); } -static inline void sun6i_spi_drain_fifo(struct sun6i_spi *sspi, int len) +static inline void sun6i_spi_drain_fifo(struct sun6i_spi *sspi) { - u32 reg, cnt; + u32 len; u8 byte; /* See how much data is available */ - reg = sun6i_spi_read(sspi, SUN6I_FIFO_STA_REG); - reg &= SUN6I_FIFO_STA_RF_CNT_MASK; - cnt = reg >> SUN6I_FIFO_STA_RF_CNT_BITS; - - if (len > cnt) - len = cnt; + len = sun6i_spi_get_rx_fifo_count(sspi); while (len--) { byte = readb(sspi->base_addr + SUN6I_RXDATA_REG); @@ -154,15 +142,16 @@ static inline void sun6i_spi_drain_fifo(struct sun6i_spi *sspi, int len) } } -static inline void sun6i_spi_fill_fifo(struct sun6i_spi *sspi, int len) +static inline void sun6i_spi_fill_fifo(struct sun6i_spi *sspi) { u32 cnt; + int len; u8 byte; /* See how much data we can fit */ cnt = sspi->fifo_depth - sun6i_spi_get_tx_fifo_count(sspi); - len = min3(len, (int)cnt, sspi->len); + len = min((int)cnt, sspi->len); while (len--) { byte = sspi->tx_buf ? *sspi->tx_buf++ : 0; @@ -201,7 +190,7 @@ static int sun6i_spi_transfer_one(struct spi_master *master, unsigned int mclk_rate, div, div_cdr1, div_cdr2, timeout; unsigned int start, end, tx_time; unsigned int trig_level; - unsigned int tx_len = 0; + unsigned int tx_len = 0, rx_len = 0; int ret = 0; u32 reg; @@ -256,10 +245,12 @@ static int sun6i_spi_transfer_one(struct spi_master *master, * If it's a TX only transfer, we don't want to fill the RX * FIFO with bogus data */ - if (sspi->rx_buf) + if (sspi->rx_buf) { reg &= ~SUN6I_TFR_CTL_DHB; - else + rx_len = tfr->len; + } else { reg |= SUN6I_TFR_CTL_DHB; + } /* We want to control the chip select manually */ reg |= SUN6I_TFR_CTL_CS_MANUAL; @@ -291,9 +282,11 @@ static int sun6i_spi_transfer_one(struct spi_master *master, div_cdr2 = DIV_ROUND_UP(div_cdr1, 2); if (div_cdr2 <= (SUN6I_CLK_CTL_CDR2_MASK + 1)) { reg = SUN6I_CLK_CTL_CDR2(div_cdr2 - 1) | SUN6I_CLK_CTL_DRS; + tfr->effective_speed_hz = mclk_rate / (2 * div_cdr2); } else { div = min(SUN6I_CLK_CTL_CDR1_MASK, order_base_2(div_cdr1)); reg = SUN6I_CLK_CTL_CDR1(div); + tfr->effective_speed_hz = mclk_rate / (1 << div); } sun6i_spi_write(sspi, SUN6I_CLK_CTL_REG, reg); @@ -303,20 +296,22 @@ static int sun6i_spi_transfer_one(struct spi_master *master, tx_len = tfr->len; /* Setup the counters */ - sun6i_spi_write(sspi, SUN6I_BURST_CNT_REG, SUN6I_BURST_CNT(tfr->len)); - sun6i_spi_write(sspi, SUN6I_XMIT_CNT_REG, SUN6I_XMIT_CNT(tx_len)); - sun6i_spi_write(sspi, SUN6I_BURST_CTL_CNT_REG, - SUN6I_BURST_CTL_CNT_STC(tx_len)); + sun6i_spi_write(sspi, SUN6I_BURST_CNT_REG, tfr->len); + sun6i_spi_write(sspi, SUN6I_XMIT_CNT_REG, tx_len); + sun6i_spi_write(sspi, SUN6I_BURST_CTL_CNT_REG, tx_len); /* Fill the TX FIFO */ - sun6i_spi_fill_fifo(sspi, sspi->fifo_depth); + sun6i_spi_fill_fifo(sspi); /* Enable the interrupts */ - sun6i_spi_write(sspi, SUN6I_INT_CTL_REG, SUN6I_INT_CTL_TC); - sun6i_spi_enable_interrupt(sspi, SUN6I_INT_CTL_TC | - SUN6I_INT_CTL_RF_RDY); + reg = SUN6I_INT_CTL_TC; + + if (rx_len > sspi->fifo_depth) + reg |= SUN6I_INT_CTL_RF_RDY; if (tx_len > sspi->fifo_depth) - sun6i_spi_enable_interrupt(sspi, SUN6I_INT_CTL_TF_ERQ); + reg |= SUN6I_INT_CTL_TF_ERQ; + + sun6i_spi_write(sspi, SUN6I_INT_CTL_REG, reg); /* Start the transfer */ reg = sun6i_spi_read(sspi, SUN6I_TFR_CTL_REG); @@ -333,10 +328,8 @@ static int sun6i_spi_transfer_one(struct spi_master *master, dev_name(&spi->dev), tfr->len, tfr->speed_hz, jiffies_to_msecs(end - start), tx_time); ret = -ETIMEDOUT; - goto out; } -out: sun6i_spi_write(sspi, SUN6I_INT_CTL_REG, 0); return ret; @@ -350,14 +343,14 @@ static irqreturn_t sun6i_spi_handler(int irq, void *dev_id) /* Transfer complete */ if (status & SUN6I_INT_CTL_TC) { sun6i_spi_write(sspi, SUN6I_INT_STA_REG, SUN6I_INT_CTL_TC); - sun6i_spi_drain_fifo(sspi, sspi->fifo_depth); + sun6i_spi_drain_fifo(sspi); complete(&sspi->done); return IRQ_HANDLED; } /* Receive FIFO 3/4 full */ if (status & SUN6I_INT_CTL_RF_RDY) { - sun6i_spi_drain_fifo(sspi, SUN6I_FIFO_DEPTH); + sun6i_spi_drain_fifo(sspi); /* Only clear the interrupt _after_ draining the FIFO */ sun6i_spi_write(sspi, SUN6I_INT_STA_REG, SUN6I_INT_CTL_RF_RDY); return IRQ_HANDLED; @@ -365,7 +358,7 @@ static irqreturn_t sun6i_spi_handler(int irq, void *dev_id) /* Transmit FIFO 3/4 empty */ if (status & SUN6I_INT_CTL_TF_ERQ) { - sun6i_spi_fill_fifo(sspi, SUN6I_FIFO_DEPTH); + sun6i_spi_fill_fifo(sspi); if (!sspi->len) /* nothing left to transmit */ diff --git a/drivers/spi/spi-ti-qspi.c b/drivers/spi/spi-ti-qspi.c index 366a3e5cca6b..3c41649698a5 100644 --- a/drivers/spi/spi-ti-qspi.c +++ b/drivers/spi/spi-ti-qspi.c @@ -2,7 +2,7 @@ /* * TI QSPI driver * - * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com + * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com * Author: Sourav Poddar <sourav.poddar@ti.com> */ diff --git a/drivers/spi/spi-topcliff-pch.c b/drivers/spi/spi-topcliff-pch.c index d7ea6af74743..6df2aeff2843 100644 --- a/drivers/spi/spi-topcliff-pch.c +++ b/drivers/spi/spi-topcliff-pch.c @@ -122,6 +122,7 @@ struct pch_spi_dma_ctrl { /** * struct pch_spi_data - Holds the SPI channel specific details * @io_remap_addr: The remapped PCI base address + * @io_base_addr: Base address * @master: Pointer to the SPI master structure * @work: Reference to work queue handler * @wait: Wait queue for waking up upon receiving an @@ -138,8 +139,8 @@ struct pch_spi_dma_ctrl { * transfer * @rx_index: Receive data count; for bookkeeping during * transfer - * @tx_buff: Buffer for data to be transmitted - * @rx_index: Buffer for Received data + * @pkt_tx_buff: Buffer for data to be transmitted + * @pkt_rx_buff: Buffer for received data * @n_curnt_chip: The chip number that this SPI driver currently * operates on * @current_chip: Reference to the current chip that this SPI @@ -151,7 +152,10 @@ struct pch_spi_dma_ctrl { * @board_dat: Reference to the SPI device data structure * @plat_dev: platform_device structure * @ch: SPI channel number + * @dma: Local DMA information + * @use_dma: True if DMA is to be used * @irq_reg_sts: Status of IRQ registration + * @save_total_len: Save length while data is being transferred */ struct pch_spi_data { void __iomem *io_remap_addr; @@ -1631,64 +1635,37 @@ static void pch_spi_remove(struct pci_dev *pdev) kfree(pd_dev_save); } -#ifdef CONFIG_PM -static int pch_spi_suspend(struct pci_dev *pdev, pm_message_t state) +static int __maybe_unused pch_spi_suspend(struct device *dev) { - int retval; - struct pch_pd_dev_save *pd_dev_save = pci_get_drvdata(pdev); + struct pch_pd_dev_save *pd_dev_save = dev_get_drvdata(dev); - dev_dbg(&pdev->dev, "%s ENTRY\n", __func__); + dev_dbg(dev, "%s ENTRY\n", __func__); pd_dev_save->board_dat->suspend_sts = true; - /* save config space */ - retval = pci_save_state(pdev); - if (retval == 0) { - pci_enable_wake(pdev, PCI_D3hot, 0); - pci_disable_device(pdev); - pci_set_power_state(pdev, PCI_D3hot); - } else { - dev_err(&pdev->dev, "%s pci_save_state failed\n", __func__); - } - - return retval; + return 0; } -static int pch_spi_resume(struct pci_dev *pdev) +static int __maybe_unused pch_spi_resume(struct device *dev) { - int retval; - struct pch_pd_dev_save *pd_dev_save = pci_get_drvdata(pdev); - dev_dbg(&pdev->dev, "%s ENTRY\n", __func__); + struct pch_pd_dev_save *pd_dev_save = dev_get_drvdata(dev); - pci_set_power_state(pdev, PCI_D0); - pci_restore_state(pdev); + dev_dbg(dev, "%s ENTRY\n", __func__); - retval = pci_enable_device(pdev); - if (retval < 0) { - dev_err(&pdev->dev, - "%s pci_enable_device failed\n", __func__); - } else { - pci_enable_wake(pdev, PCI_D3hot, 0); - - /* set suspend status to false */ - pd_dev_save->board_dat->suspend_sts = false; - } + /* set suspend status to false */ + pd_dev_save->board_dat->suspend_sts = false; - return retval; + return 0; } -#else -#define pch_spi_suspend NULL -#define pch_spi_resume NULL -#endif +static SIMPLE_DEV_PM_OPS(pch_spi_pm_ops, pch_spi_suspend, pch_spi_resume); static struct pci_driver pch_spi_pcidev_driver = { .name = "pch_spi", .id_table = pch_spi_pcidev_id, .probe = pch_spi_probe, .remove = pch_spi_remove, - .suspend = pch_spi_suspend, - .resume = pch_spi_resume, + .driver.pm = &pch_spi_pm_ops, }; static int __init pch_spi_init(void) diff --git a/drivers/spi/spi-zynq-qspi.c b/drivers/spi/spi-zynq-qspi.c index 17641157354d..5d8a5ee62fa2 100644 --- a/drivers/spi/spi-zynq-qspi.c +++ b/drivers/spi/spi-zynq-qspi.c @@ -119,6 +119,7 @@ /** * struct zynq_qspi - Defines qspi driver instance + * @dev: Pointer to the this device's information * @regs: Virtual address of the QSPI controller registers * @refclk: Pointer to the peripheral clock * @pclk: Pointer to the APB clock @@ -316,7 +317,7 @@ static void zynq_qspi_chipselect(struct spi_device *spi, bool assert) /** * zynq_qspi_config_op - Configure QSPI controller for specified transfer * @xqspi: Pointer to the zynq_qspi structure - * @qspi: Pointer to the spi_device structure + * @spi: Pointer to the spi_device structure * * Sets the operational mode of QSPI controller for the next QSPI transfer and * sets the requested clock frequency. @@ -527,20 +528,21 @@ static int zynq_qspi_exec_mem_op(struct spi_mem *mem, struct zynq_qspi *xqspi = spi_controller_get_devdata(mem->spi->master); int err = 0, i; u8 *tmpbuf; + u8 opcode = op->cmd.opcode; dev_dbg(xqspi->dev, "cmd:%#x mode:%d.%d.%d.%d\n", - op->cmd.opcode, op->cmd.buswidth, op->addr.buswidth, + opcode, op->cmd.buswidth, op->addr.buswidth, op->dummy.buswidth, op->data.buswidth); zynq_qspi_chipselect(mem->spi, true); zynq_qspi_config_op(xqspi, mem->spi); - if (op->cmd.opcode) { + if (op->cmd.nbytes) { reinit_completion(&xqspi->data_completion); - xqspi->txbuf = (u8 *)&op->cmd.opcode; + xqspi->txbuf = &opcode; xqspi->rxbuf = NULL; - xqspi->tx_bytes = sizeof(op->cmd.opcode); - xqspi->rx_bytes = sizeof(op->cmd.opcode); + xqspi->tx_bytes = op->cmd.nbytes; + xqspi->rx_bytes = op->cmd.nbytes; zynq_qspi_write_op(xqspi, ZYNQ_QSPI_FIFO_DEPTH, true); zynq_qspi_write(xqspi, ZYNQ_QSPI_IEN_OFFSET, ZYNQ_QSPI_IXR_RXTX_MASK); diff --git a/drivers/spi/spi-zynqmp-gqspi.c b/drivers/spi/spi-zynqmp-gqspi.c index 811c97a7c858..e17a20125255 100644 --- a/drivers/spi/spi-zynqmp-gqspi.c +++ b/drivers/spi/spi-zynqmp-gqspi.c @@ -197,8 +197,8 @@ static inline void zynqmp_gqspi_write(struct zynqmp_qspi *xqspi, u32 offset, /** * zynqmp_gqspi_selectslave: For selection of slave device * @instanceptr: Pointer to the zynqmp_qspi structure - * @flashcs: For chip select - * @flashbus: To check which bus is selected- upper or lower + * @slavecs: For chip select + * @slavebus: To check which bus is selected- upper or lower */ static void zynqmp_gqspi_selectslave(struct zynqmp_qspi *instanceptr, u8 slavecs, u8 slavebus) @@ -892,7 +892,7 @@ static int zynqmp_qspi_start_transfer(struct spi_master *master, /** * zynqmp_qspi_suspend: Suspend method for the QSPI driver - * @_dev: Address of the platform_device structure + * @dev: Address of the platform_device structure * * This function stops the QSPI driver queue and disables the QSPI controller * diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index 8158e281f354..0b260484b4f5 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -778,6 +778,17 @@ static void spi_set_cs(struct spi_device *spi, bool enable) { bool enable1 = enable; + /* + * Avoid calling into the driver (or doing delays) if the chip select + * isn't actually changing from the last time this was called. + */ + if ((spi->controller->last_cs_enable == enable) && + (spi->controller->last_cs_mode_high == (spi->mode & SPI_CS_HIGH))) + return; + + spi->controller->last_cs_enable = enable; + spi->controller->last_cs_mode_high = spi->mode & SPI_CS_HIGH; + if (!spi->controller->set_cs_timing) { if (enable1) spi_delay_exec(&spi->controller->cs_setup, NULL); @@ -982,6 +993,8 @@ static int __spi_unmap_msg(struct spi_controller *ctlr, struct spi_message *msg) spi_unmap_buf(ctlr, tx_dev, &xfer->tx_sg, DMA_TO_DEVICE); } + ctlr->cur_msg_mapped = false; + return 0; } #else /* !CONFIG_HAS_DMA */ @@ -1234,8 +1247,17 @@ static int spi_transfer_one_message(struct spi_controller *ctlr, if (xfer->tx_buf || xfer->rx_buf) { reinit_completion(&ctlr->xfer_completion); +fallback_pio: ret = ctlr->transfer_one(ctlr, msg->spi, xfer); if (ret < 0) { + if (ctlr->cur_msg_mapped && + (xfer->error & SPI_TRANS_FAIL_NO_START)) { + __spi_unmap_msg(ctlr, msg); + ctlr->fallback = true; + xfer->error &= ~SPI_TRANS_FAIL_NO_START; + goto fallback_pio; + } + SPI_STATISTICS_INCREMENT_FIELD(statm, errors); SPI_STATISTICS_INCREMENT_FIELD(stats, @@ -1314,6 +1336,14 @@ void spi_finalize_current_transfer(struct spi_controller *ctlr) } EXPORT_SYMBOL_GPL(spi_finalize_current_transfer); +static void spi_idle_runtime_pm(struct spi_controller *ctlr) +{ + if (ctlr->auto_runtime_pm) { + pm_runtime_mark_last_busy(ctlr->dev.parent); + pm_runtime_put_autosuspend(ctlr->dev.parent); + } +} + /** * __spi_pump_messages - function which processes spi message queue * @ctlr: controller to process queue for @@ -1346,7 +1376,7 @@ static void __spi_pump_messages(struct spi_controller *ctlr, bool in_kthread) /* If another context is idling the device then defer */ if (ctlr->idling) { - kthread_queue_work(&ctlr->kworker, &ctlr->pump_messages); + kthread_queue_work(ctlr->kworker, &ctlr->pump_messages); spin_unlock_irqrestore(&ctlr->queue_lock, flags); return; } @@ -1358,10 +1388,17 @@ static void __spi_pump_messages(struct spi_controller *ctlr, bool in_kthread) return; } - /* Only do teardown in the thread */ + /* Defer any non-atomic teardown to the thread */ if (!in_kthread) { - kthread_queue_work(&ctlr->kworker, - &ctlr->pump_messages); + if (!ctlr->dummy_rx && !ctlr->dummy_tx && + !ctlr->unprepare_transfer_hardware) { + spi_idle_runtime_pm(ctlr); + ctlr->busy = false; + trace_spi_controller_idle(ctlr); + } else { + kthread_queue_work(ctlr->kworker, + &ctlr->pump_messages); + } spin_unlock_irqrestore(&ctlr->queue_lock, flags); return; } @@ -1378,10 +1415,7 @@ static void __spi_pump_messages(struct spi_controller *ctlr, bool in_kthread) ctlr->unprepare_transfer_hardware(ctlr)) dev_err(&ctlr->dev, "failed to unprepare transfer hardware\n"); - if (ctlr->auto_runtime_pm) { - pm_runtime_mark_last_busy(ctlr->dev.parent); - pm_runtime_put_autosuspend(ctlr->dev.parent); - } + spi_idle_runtime_pm(ctlr); trace_spi_controller_idle(ctlr); spin_lock_irqsave(&ctlr->queue_lock, flags); @@ -1596,7 +1630,7 @@ static void spi_set_thread_rt(struct spi_controller *ctlr) dev_info(&ctlr->dev, "will run message pump with realtime priority\n"); - sched_setscheduler(ctlr->kworker_task, SCHED_FIFO, ¶m); + sched_setscheduler(ctlr->kworker->task, SCHED_FIFO, ¶m); } static int spi_init_queue(struct spi_controller *ctlr) @@ -1604,13 +1638,12 @@ static int spi_init_queue(struct spi_controller *ctlr) ctlr->running = false; ctlr->busy = false; - kthread_init_worker(&ctlr->kworker); - ctlr->kworker_task = kthread_run(kthread_worker_fn, &ctlr->kworker, - "%s", dev_name(&ctlr->dev)); - if (IS_ERR(ctlr->kworker_task)) { - dev_err(&ctlr->dev, "failed to create message pump task\n"); - return PTR_ERR(ctlr->kworker_task); + ctlr->kworker = kthread_create_worker(0, dev_name(&ctlr->dev)); + if (IS_ERR(ctlr->kworker)) { + dev_err(&ctlr->dev, "failed to create message pump kworker\n"); + return PTR_ERR(ctlr->kworker); } + kthread_init_work(&ctlr->pump_messages, spi_pump_messages); /* @@ -1693,7 +1726,8 @@ void spi_finalize_current_message(struct spi_controller *ctlr) spin_lock_irqsave(&ctlr->queue_lock, flags); ctlr->cur_msg = NULL; ctlr->cur_msg_prepared = false; - kthread_queue_work(&ctlr->kworker, &ctlr->pump_messages); + ctlr->fallback = false; + kthread_queue_work(ctlr->kworker, &ctlr->pump_messages); spin_unlock_irqrestore(&ctlr->queue_lock, flags); trace_spi_message_done(mesg); @@ -1719,7 +1753,7 @@ static int spi_start_queue(struct spi_controller *ctlr) ctlr->cur_msg = NULL; spin_unlock_irqrestore(&ctlr->queue_lock, flags); - kthread_queue_work(&ctlr->kworker, &ctlr->pump_messages); + kthread_queue_work(ctlr->kworker, &ctlr->pump_messages); return 0; } @@ -1775,8 +1809,7 @@ static int spi_destroy_queue(struct spi_controller *ctlr) return ret; } - kthread_flush_worker(&ctlr->kworker); - kthread_stop(ctlr->kworker_task); + kthread_destroy_worker(ctlr->kworker); return 0; } @@ -1799,7 +1832,7 @@ static int __spi_queued_transfer(struct spi_device *spi, list_add_tail(&msg->queue, &ctlr->queue); if (!ctlr->busy && need_pump) - kthread_queue_work(&ctlr->kworker, &ctlr->pump_messages); + kthread_queue_work(ctlr->kworker, &ctlr->pump_messages); spin_unlock_irqrestore(&ctlr->queue_lock, flags); return 0; diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c index 59e07675ef86..455e99c4958e 100644 --- a/drivers/spi/spidev.c +++ b/drivers/spi/spidev.c @@ -224,6 +224,11 @@ static int spidev_message(struct spidev_data *spidev, for (n = n_xfers, k_tmp = k_xfers, u_tmp = u_xfers; n; n--, k_tmp++, u_tmp++) { + /* Ensure that also following allocations from rx_buf/tx_buf will meet + * DMA alignment requirements. + */ + unsigned int len_aligned = ALIGN(u_tmp->len, ARCH_KMALLOC_MINALIGN); + k_tmp->len = u_tmp->len; total += k_tmp->len; @@ -239,17 +244,17 @@ static int spidev_message(struct spidev_data *spidev, if (u_tmp->rx_buf) { /* this transfer needs space in RX bounce buffer */ - rx_total += k_tmp->len; + rx_total += len_aligned; if (rx_total > bufsiz) { status = -EMSGSIZE; goto done; } k_tmp->rx_buf = rx_buf; - rx_buf += k_tmp->len; + rx_buf += len_aligned; } if (u_tmp->tx_buf) { /* this transfer needs space in TX bounce buffer */ - tx_total += k_tmp->len; + tx_total += len_aligned; if (tx_total > bufsiz) { status = -EMSGSIZE; goto done; @@ -259,7 +264,7 @@ static int spidev_message(struct spidev_data *spidev, (uintptr_t) u_tmp->tx_buf, u_tmp->len)) goto done; - tx_buf += k_tmp->len; + tx_buf += len_aligned; } k_tmp->cs_change = !!u_tmp->cs_change; @@ -293,16 +298,16 @@ static int spidev_message(struct spidev_data *spidev, goto done; /* copy any rx data out of bounce buffer */ - rx_buf = spidev->rx_buffer; - for (n = n_xfers, u_tmp = u_xfers; n; n--, u_tmp++) { + for (n = n_xfers, k_tmp = k_xfers, u_tmp = u_xfers; + n; + n--, k_tmp++, u_tmp++) { if (u_tmp->rx_buf) { if (copy_to_user((u8 __user *) - (uintptr_t) u_tmp->rx_buf, rx_buf, + (uintptr_t) u_tmp->rx_buf, k_tmp->rx_buf, u_tmp->len)) { status = -EFAULT; goto done; } - rx_buf += u_tmp->len; } } status = total; diff --git a/include/linux/platform_data/spi-imx.h b/include/linux/platform_data/spi-imx.h deleted file mode 100644 index 328f670d10bd..000000000000 --- a/include/linux/platform_data/spi-imx.h +++ /dev/null @@ -1,33 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ - -#ifndef __MACH_SPI_H_ -#define __MACH_SPI_H_ - -/* - * struct spi_imx_master - device.platform_data for SPI controller devices. - * @chipselect: Array of chipselects for this master or NULL. Numbers >= 0 - * mean GPIO pins, -ENOENT means internal CSPI chipselect - * matching the position in the array. E.g., if chipselect[1] = - * -ENOENT then a SPI slave using chip select 1 will use the - * native SS1 line of the CSPI. Omitting the array will use - * all native chip selects. - - * Normally you want to use gpio based chip selects as the CSPI - * module tries to be intelligent about when to assert the - * chipselect: The CSPI module deasserts the chipselect once it - * runs out of input data. The other problem is that it is not - * possible to mix between high active and low active chipselects - * on one single bus using the internal chipselects. - * Unfortunately, on some SoCs, Freescale decided to put some - * chipselects on dedicated pins which are not usable as gpios, - * so we have to support the internal chipselects. - * - * @num_chipselect: If @chipselect is specified, ARRAY_SIZE(chipselect), - * otherwise the number of native chip selects. - */ -struct spi_imx_master { - int *chipselect; - int num_chipselect; -}; - -#endif /* __MACH_SPI_H_*/ diff --git a/include/linux/spi/altera.h b/include/linux/spi/altera.h new file mode 100644 index 000000000000..2d42641499a6 --- /dev/null +++ b/include/linux/spi/altera.h @@ -0,0 +1,29 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Header File for Altera SPI Driver. + */ +#ifndef __LINUX_SPI_ALTERA_H +#define __LINUX_SPI_ALTERA_H + +#include <linux/regmap.h> +#include <linux/spi/spi.h> +#include <linux/types.h> + +/** + * struct altera_spi_platform_data - Platform data of the Altera SPI driver + * @mode_bits: Mode bits of SPI master. + * @num_chipselect: Number of chipselects. + * @bits_per_word_mask: bitmask of supported bits_per_word for transfers. + * @num_devices: Number of devices that shall be added when the driver + * is probed. + * @devices: The devices to add. + */ +struct altera_spi_platform_data { + u16 mode_bits; + u16 num_chipselect; + u32 bits_per_word_mask; + u16 num_devices; + struct spi_board_info *devices; +}; + +#endif /* __LINUX_SPI_ALTERA_H */ diff --git a/include/linux/spi/spi-mem.h b/include/linux/spi/spi-mem.h index af9ff2f0f1b2..159463cc659c 100644 --- a/include/linux/spi/spi-mem.h +++ b/include/linux/spi/spi-mem.h @@ -17,6 +17,7 @@ { \ .buswidth = __buswidth, \ .opcode = __opcode, \ + .nbytes = 1, \ } #define SPI_MEM_OP_ADDR(__nbytes, __val, __buswidth) \ @@ -69,11 +70,15 @@ enum spi_mem_data_dir { /** * struct spi_mem_op - describes a SPI memory operation + * @cmd.nbytes: number of opcode bytes (only 1 or 2 are valid). The opcode is + * sent MSB-first. * @cmd.buswidth: number of IO lines used to transmit the command * @cmd.opcode: operation opcode + * @cmd.dtr: whether the command opcode should be sent in DTR mode or not * @addr.nbytes: number of address bytes to send. Can be zero if the operation * does not need to send an address * @addr.buswidth: number of IO lines used to transmit the address cycles + * @addr.dtr: whether the address should be sent in DTR mode or not * @addr.val: address value. This value is always sent MSB first on the bus. * Note that only @addr.nbytes are taken into account in this * address value, so users should make sure the value fits in the @@ -81,7 +86,9 @@ enum spi_mem_data_dir { * @dummy.nbytes: number of dummy bytes to send after an opcode or address. Can * be zero if the operation does not require dummy bytes * @dummy.buswidth: number of IO lanes used to transmit the dummy bytes + * @dummy.dtr: whether the dummy bytes should be sent in DTR mode or not * @data.buswidth: number of IO lanes used to send/receive the data + * @data.dtr: whether the data should be sent in DTR mode or not * @data.dir: direction of the transfer * @data.nbytes: number of data bytes to send/receive. Can be zero if the * operation does not involve transferring data @@ -90,23 +97,28 @@ enum spi_mem_data_dir { */ struct spi_mem_op { struct { + u8 nbytes; u8 buswidth; - u8 opcode; + u8 dtr : 1; + u16 opcode; } cmd; struct { u8 nbytes; u8 buswidth; + u8 dtr : 1; u64 val; } addr; struct { u8 nbytes; u8 buswidth; + u8 dtr : 1; } dummy; struct { u8 buswidth; + u8 dtr : 1; enum spi_mem_data_dir dir; unsigned int nbytes; union { diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index aac57b5b7c21..99380c0825db 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -329,6 +329,7 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv) * every chipselect is connected to a slave. * @dma_alignment: SPI controller constraint on DMA buffers alignment. * @mode_bits: flags understood by this controller driver + * @buswidth_override_bits: flags to override for this controller driver * @bits_per_word_mask: A mask indicating which values of bits_per_word are * supported by the driver. Bit n indicates that a bits_per_word n+1 is * supported. If set, the SPI core will reject any transfer with an @@ -358,8 +359,7 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv) * @cleanup: frees controller-specific state * @can_dma: determine whether this controller supports DMA * @queued: whether this controller is providing an internal message queue - * @kworker: thread struct for message pump - * @kworker_task: pointer to task for message pump kworker thread + * @kworker: pointer to thread struct for message pump * @pump_messages: work struct for scheduling work to the message pump * @queue_lock: spinlock to syncronise access to message queue * @queue: message queue @@ -368,6 +368,8 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv) * @cur_msg_prepared: spi_prepare_message was called for the currently * in-flight message * @cur_msg_mapped: message has been mapped for DMA + * @last_cs_enable: was enable true on the last call to set_cs. + * @last_cs_mode_high: was (mode & SPI_CS_HIGH) true on the last call to set_cs. * @xfer_completion: used by core transfer_one_message() * @busy: message pump is busy * @running: message pump is running @@ -447,6 +449,8 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv) * If the driver does not set this, the SPI core takes the snapshot as * close to the driver hand-over as possible. * @irq_flags: Interrupt enable state during PTP system timestamping + * @fallback: fallback to pio if dma transfer return failure with + * SPI_TRANS_FAIL_NO_START. * * Each SPI controller can communicate with one or more @spi_device * children. These make a small bus, sharing MOSI, MISO and SCK signals @@ -589,8 +593,7 @@ struct spi_controller { * Over time we expect SPI drivers to be phased over to this API. */ bool queued; - struct kthread_worker kworker; - struct task_struct *kworker_task; + struct kthread_worker *kworker; struct kthread_work pump_messages; spinlock_t queue_lock; struct list_head queue; @@ -602,6 +605,9 @@ struct spi_controller { bool auto_runtime_pm; bool cur_msg_prepared; bool cur_msg_mapped; + bool last_cs_enable; + bool last_cs_mode_high; + bool fallback; struct completion xfer_completion; size_t max_dma_len; @@ -841,12 +847,8 @@ extern void spi_res_release(struct spi_controller *ctlr, * processed the word, i.e. the "pre" timestamp should be taken before * transmitting the "pre" word, and the "post" timestamp after receiving * transmit confirmation from the controller for the "post" word. - * @timestamped_pre: Set by the SPI controller driver to denote it has acted - * upon the @ptp_sts request. Not set when the SPI core has taken care of - * the task. SPI device drivers are free to print a warning if this comes - * back unset and they need the better resolution. - * @timestamped_post: See above. The reason why both exist is that these - * booleans are also used to keep state in the core SPI logic. + * @timestamped: true if the transfer has been timestamped + * @error: Error status logged by spi controller driver. * * SPI transfers always write the same number of bytes as they read. * Protocol drivers should always provide @rx_buf and/or @tx_buf. @@ -940,6 +942,9 @@ struct spi_transfer { bool timestamped; struct list_head transfer_list; + +#define SPI_TRANS_FAIL_NO_START BIT(0) + u16 error; }; /** @@ -962,7 +967,7 @@ struct spi_transfer { * each represented by a struct spi_transfer. The sequence is "atomic" * in the sense that no other spi_message may use that SPI bus until that * sequence completes. On some systems, many such sequences can execute as - * as single programmed DMA transfer. On all systems, these messages are + * a single programmed DMA transfer. On all systems, these messages are * queued, and might complete after transactions to other devices. Messages * sent to a given spi_device are always executed in FIFO order. * @@ -1225,7 +1230,7 @@ extern int spi_bus_unlock(struct spi_controller *ctlr); * * For more specific semantics see spi_sync(). * - * Return: Return: zero on success, else a negative error code. + * Return: zero on success, else a negative error code. */ static inline int spi_sync_transfer(struct spi_device *spi, struct spi_transfer *xfers, diff --git a/include/memory/renesas-rpc-if.h b/include/memory/renesas-rpc-if.h new file mode 100644 index 000000000000..9ad136682c47 --- /dev/null +++ b/include/memory/renesas-rpc-if.h @@ -0,0 +1,87 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Renesas RPC-IF core driver + * + * Copyright (C) 2018~2019 Renesas Solutions Corp. + * Copyright (C) 2019 Macronix International Co., Ltd. + * Copyright (C) 2019-2020 Cogent Embedded, Inc. + */ + +#ifndef __RENESAS_RPC_IF_H +#define __RENESAS_RPC_IF_H + +#include <linux/types.h> + +enum rpcif_data_dir { + RPCIF_NO_DATA, + RPCIF_DATA_IN, + RPCIF_DATA_OUT, +}; + +struct rpcif_op { + struct { + u8 buswidth; + u8 opcode; + bool ddr; + } cmd, ocmd; + + struct { + u8 nbytes; + u8 buswidth; + bool ddr; + u64 val; + } addr; + + struct { + u8 ncycles; + u8 buswidth; + } dummy; + + struct { + u8 nbytes; + u8 buswidth; + bool ddr; + u32 val; + } option; + + struct { + u8 buswidth; + unsigned int nbytes; + enum rpcif_data_dir dir; + bool ddr; + union { + void *in; + const void *out; + } buf; + } data; +}; + +struct rpcif { + struct device *dev; + void __iomem *dirmap; + struct regmap *regmap; + struct reset_control *rstc; + size_t size; + enum rpcif_data_dir dir; + u8 bus_size; + void *buffer; + u32 xferlen; + u32 smcr; + u32 smadr; + u32 command; /* DRCMR or SMCMR */ + u32 option; /* DROPR or SMOPR */ + u32 enable; /* DRENR or SMENR */ + u32 dummy; /* DRDMCR or SMDMCR */ + u32 ddr; /* DRDRENR or SMDRENR */ +}; + +int rpcif_sw_init(struct rpcif *rpc, struct device *dev); +void rpcif_hw_init(struct rpcif *rpc, bool hyperflash); +void rpcif_enable_rpm(struct rpcif *rpc); +void rpcif_disable_rpm(struct rpcif *rpc); +void rpcif_prepare(struct rpcif *rpc, const struct rpcif_op *op, u64 *offs, + size_t *len); +int rpcif_manual_xfer(struct rpcif *rpc); +ssize_t rpcif_dirmap_read(struct rpcif *rpc, u64 offs, size_t len, void *buf); + +#endif // __RENESAS_RPC_IF_H |