diff options
| -rw-r--r-- | drivers/net/usb/lan78xx.c | 29 |
1 files changed, 28 insertions, 1 deletions
diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c index 0460b81a8784..f64778ad9753 100644 --- a/drivers/net/usb/lan78xx.c +++ b/drivers/net/usb/lan78xx.c @@ -1804,7 +1804,34 @@ static void lan78xx_remove_mdio(struct lan78xx_net *dev) static void lan78xx_link_status_change(struct net_device *net) { - /* nothing to do */ + struct phy_device *phydev = net->phydev; + int ret, temp; + + /* At forced 100 F/H mode, chip may fail to set mode correctly + * when cable is switched between long(~50+m) and short one. + * As workaround, set to 10 before setting to 100 + * at forced 100 F/H mode. + */ + if (!phydev->autoneg && (phydev->speed == 100)) { + /* disable phy interrupt */ + temp = phy_read(phydev, LAN88XX_INT_MASK); + temp &= ~LAN88XX_INT_MASK_MDINTPIN_EN_; + ret = phy_write(phydev, LAN88XX_INT_MASK, temp); + + temp = phy_read(phydev, MII_BMCR); + temp &= ~(BMCR_SPEED100 | BMCR_SPEED1000); + phy_write(phydev, MII_BMCR, temp); /* set to 10 first */ + temp |= BMCR_SPEED100; + phy_write(phydev, MII_BMCR, temp); /* set to 100 later */ + + /* clear pending interrupt generated while workaround */ + temp = phy_read(phydev, LAN88XX_INT_STS); + + /* enable phy interrupt back */ + temp = phy_read(phydev, LAN88XX_INT_MASK); + temp |= LAN88XX_INT_MASK_MDINTPIN_EN_; + ret = phy_write(phydev, LAN88XX_INT_MASK, temp); + } } static int lan78xx_phy_init(struct lan78xx_net *dev) |