diff options
| -rw-r--r-- | arch/i386/kernel/acpi/boot.c | 76 | ||||
| -rw-r--r-- | arch/i386/kernel/apic.c | 15 | ||||
| -rw-r--r-- | arch/i386/kernel/io_apic.c | 24 | ||||
| -rw-r--r-- | arch/i386/kernel/machine_kexec.c | 23 | ||||
| -rw-r--r-- | arch/i386/kernel/setup.c | 350 | ||||
| -rw-r--r-- | arch/i386/kernel/smpboot.c | 13 | ||||
| -rw-r--r-- | arch/i386/mach-generic/probe.c | 58 | ||||
| -rw-r--r-- | arch/i386/mm/init.c | 18 | ||||
| -rw-r--r-- | include/asm-i386/acpi.h | 14 | ||||
| -rw-r--r-- | include/asm-i386/apic.h | 4 | ||||
| -rw-r--r-- | include/asm-i386/io_apic.h | 11 | ||||
| -rw-r--r-- | include/asm-i386/pgtable.h | 2 |
12 files changed, 319 insertions, 289 deletions
diff --git a/arch/i386/kernel/acpi/boot.c b/arch/i386/kernel/acpi/boot.c index ee003bc0e8b1..87e2ab50b694 100644 --- a/arch/i386/kernel/acpi/boot.c +++ b/arch/i386/kernel/acpi/boot.c @@ -36,6 +36,8 @@ #include <asm/io.h> #include <asm/mpspec.h> +int __initdata acpi_force = 0; + #ifdef CONFIG_X86_64 extern void __init clustered_apic_check(void); @@ -860,8 +862,6 @@ static void __init acpi_process_madt(void) return; } -extern int acpi_force; - #ifdef __i386__ static int __init disable_acpi_irq(struct dmi_system_id *d) @@ -1163,3 +1163,75 @@ int __init acpi_boot_init(void) return 0; } + +static int __init parse_acpi(char *arg) +{ + if (!arg) + return -EINVAL; + + /* "acpi=off" disables both ACPI table parsing and interpreter */ + if (strcmp(arg, "off") == 0) { + disable_acpi(); + } + /* acpi=force to over-ride black-list */ + else if (strcmp(arg, "force") == 0) { + acpi_force = 1; + acpi_ht = 1; + acpi_disabled = 0; + } + /* acpi=strict disables out-of-spec workarounds */ + else if (strcmp(arg, "strict") == 0) { + acpi_strict = 1; + } + /* Limit ACPI just to boot-time to enable HT */ + else if (strcmp(arg, "ht") == 0) { + if (!acpi_force) + disable_acpi(); + acpi_ht = 1; + } + /* "acpi=noirq" disables ACPI interrupt routing */ + else if (strcmp(arg, "noirq") == 0) { + acpi_noirq_set(); + } else { + /* Core will printk when we return error. */ + return -EINVAL; + } + return 0; +} +early_param("acpi", parse_acpi); + +/* FIXME: Using pci= for an ACPI parameter is a travesty. */ +static int __init parse_pci(char *arg) +{ + if (arg && strcmp(arg, "noacpi") == 0) + acpi_disable_pci(); + return 0; +} +early_param("pci", parse_pci); + +#ifdef CONFIG_X86_IO_APIC +static int __init parse_acpi_skip_timer_override(char *arg) +{ + acpi_skip_timer_override = 1; + return 0; +} +early_param("acpi_skip_timer_override", parse_acpi_skip_timer_override); +#endif /* CONFIG_X86_IO_APIC */ + +static int __init setup_acpi_sci(char *s) +{ + if (!s) + return -EINVAL; + if (!strcmp(s, "edge")) + acpi_sci_flags.trigger = 1; + else if (!strcmp(s, "level")) + acpi_sci_flags.trigger = 3; + else if (!strcmp(s, "high")) + acpi_sci_flags.polarity = 1; + else if (!strcmp(s, "low")) + acpi_sci_flags.polarity = 3; + else + return -EINVAL; + return 0; +} +early_param("acpi_sci", setup_acpi_sci); diff --git a/arch/i386/kernel/apic.c b/arch/i386/kernel/apic.c index 1a34fc57800b..ce75e71b694f 100644 --- a/arch/i386/kernel/apic.c +++ b/arch/i386/kernel/apic.c @@ -1372,3 +1372,18 @@ int __init APIC_init_uniprocessor (void) return 0; } + +static int __init parse_lapic(char *arg) +{ + lapic_enable(); + return 0; +} +early_param("lapic", parse_lapic); + +static int __init parse_nolapic(char *arg) +{ + lapic_disable(); + return 0; +} +early_param("nolapic", parse_nolapic); + diff --git a/arch/i386/kernel/io_apic.c b/arch/i386/kernel/io_apic.c index b713f27d7e86..fd0df75cfbda 100644 --- a/arch/i386/kernel/io_apic.c +++ b/arch/i386/kernel/io_apic.c @@ -66,7 +66,7 @@ int sis_apic_bug = -1; */ int nr_ioapic_registers[MAX_IO_APICS]; -int disable_timer_pin_1 __initdata; +static int disable_timer_pin_1 __initdata; /* * Rough estimation of how many shared IRQs there are, can @@ -2691,3 +2691,25 @@ int io_apic_set_pci_routing (int ioapic, int pin, int irq, int edge_level, int a } #endif /* CONFIG_ACPI */ + +static int __init parse_disable_timer_pin_1(char *arg) +{ + disable_timer_pin_1 = 1; + return 0; +} +early_param("disable_timer_pin_1", parse_disable_timer_pin_1); + +static int __init parse_enable_timer_pin_1(char *arg) +{ + disable_timer_pin_1 = -1; + return 0; +} +early_param("enable_timer_pin_1", parse_enable_timer_pin_1); + +static int __init parse_noapic(char *arg) +{ + /* disable IO-APIC */ + disable_ioapic_setup(); + return 0; +} +early_param("noapic", parse_noapic); diff --git a/arch/i386/kernel/machine_kexec.c b/arch/i386/kernel/machine_kexec.c index 6b1ae6ba76f0..66c3dc99a655 100644 --- a/arch/i386/kernel/machine_kexec.c +++ b/arch/i386/kernel/machine_kexec.c @@ -9,6 +9,7 @@ #include <linux/mm.h> #include <linux/kexec.h> #include <linux/delay.h> +#include <linux/init.h> #include <asm/pgtable.h> #include <asm/pgalloc.h> #include <asm/tlbflush.h> @@ -209,3 +210,25 @@ NORET_TYPE void machine_kexec(struct kimage *image) rnk = (relocate_new_kernel_t) reboot_code_buffer; (*rnk)(page_list, reboot_code_buffer, image->start, cpu_has_pae); } + +/* crashkernel=size@addr specifies the location to reserve for + * a crash kernel. By reserving this memory we guarantee + * that linux never sets it up as a DMA target. + * Useful for holding code to do something appropriate + * after a kernel panic. + */ +static int __init parse_crashkernel(char *arg) +{ + unsigned long size, base; + size = memparse(arg, &arg); + if (*arg == '@') { + base = memparse(arg+1, &arg); + /* FIXME: Do I want a sanity check + * to validate the memory range? + */ + crashk_res.start = base; + crashk_res.end = base + size - 1; + } + return 0; +} +early_param("crashkernel", parse_crashkernel); diff --git a/arch/i386/kernel/setup.c b/arch/i386/kernel/setup.c index 71a540362b78..c6e31ed386f5 100644 --- a/arch/i386/kernel/setup.c +++ b/arch/i386/kernel/setup.c @@ -96,11 +96,6 @@ unsigned long mmu_cr4_features; #endif EXPORT_SYMBOL(acpi_disabled); -#ifdef CONFIG_ACPI -int __initdata acpi_force = 0; -extern acpi_interrupt_flags acpi_sci_flags; -#endif - /* for MCA, but anyone else can use it if they want */ unsigned int machine_id; #ifdef CONFIG_MCA @@ -148,7 +143,6 @@ EXPORT_SYMBOL(ist_info); struct e820map e820; extern void early_cpu_init(void); -extern void generic_apic_probe(char *); extern int root_mountflags; unsigned long saved_videomode; @@ -700,238 +694,132 @@ static inline void copy_edd(void) } #endif -static void __init parse_cmdline_early (char ** cmdline_p) -{ - char c = ' ', *to = command_line, *from = saved_command_line; - int len = 0; - int userdef = 0; +static int __initdata user_defined_memmap = 0; - /* Save unparsed command line copy for /proc/cmdline */ - saved_command_line[COMMAND_LINE_SIZE-1] = '\0'; +/* + * "mem=nopentium" disables the 4MB page tables. + * "mem=XXX[kKmM]" defines a memory region from HIGH_MEM + * to <mem>, overriding the bios size. + * "memmap=XXX[KkmM]@XXX[KkmM]" defines a memory region from + * <start> to <start>+<mem>, overriding the bios size. + * + * HPA tells me bootloaders need to parse mem=, so no new + * option should be mem= [also see Documentation/i386/boot.txt] + */ +static int __init parse_mem(char *arg) +{ + if (!arg) + return -EINVAL; - for (;;) { - if (c != ' ') - goto next_char; - /* - * "mem=nopentium" disables the 4MB page tables. - * "mem=XXX[kKmM]" defines a memory region from HIGH_MEM - * to <mem>, overriding the bios size. - * "memmap=XXX[KkmM]@XXX[KkmM]" defines a memory region from - * <start> to <start>+<mem>, overriding the bios size. - * - * HPA tells me bootloaders need to parse mem=, so no new - * option should be mem= [also see Documentation/i386/boot.txt] + if (strcmp(arg, "nopentium") == 0) { + clear_bit(X86_FEATURE_PSE, boot_cpu_data.x86_capability); + disable_pse = 1; + } else { + /* If the user specifies memory size, we + * limit the BIOS-provided memory map to + * that size. exactmap can be used to specify + * the exact map. mem=number can be used to + * trim the existing memory map. */ - if (!memcmp(from, "mem=", 4)) { - if (to != command_line) - to--; - if (!memcmp(from+4, "nopentium", 9)) { - from += 9+4; - clear_bit(X86_FEATURE_PSE, boot_cpu_data.x86_capability); - disable_pse = 1; - } else { - /* If the user specifies memory size, we - * limit the BIOS-provided memory map to - * that size. exactmap can be used to specify - * the exact map. mem=number can be used to - * trim the existing memory map. - */ - unsigned long long mem_size; + unsigned long long mem_size; - mem_size = memparse(from+4, &from); - limit_regions(mem_size); - userdef=1; - } - } - - else if (!memcmp(from, "memmap=", 7)) { - if (to != command_line) - to--; - if (!memcmp(from+7, "exactmap", 8)) { -#ifdef CONFIG_CRASH_DUMP - /* If we are doing a crash dump, we - * still need to know the real mem - * size before original memory map is - * reset. - */ - find_max_pfn(); - saved_max_pfn = max_pfn; -#endif - from += 8+7; - e820.nr_map = 0; - userdef = 1; - } else { - /* If the user specifies memory size, we - * limit the BIOS-provided memory map to - * that size. exactmap can be used to specify - * the exact map. mem=number can be used to - * trim the existing memory map. - */ - unsigned long long start_at, mem_size; - - mem_size = memparse(from+7, &from); - if (*from == '@') { - start_at = memparse(from+1, &from); - add_memory_region(start_at, mem_size, E820_RAM); - } else if (*from == '#') { - start_at = memparse(from+1, &from); - add_memory_region(start_at, mem_size, E820_ACPI); - } else if (*from == '$') { - start_at = memparse(from+1, &from); - add_memory_region(start_at, mem_size, E820_RESERVED); - } else { - limit_regions(mem_size); - userdef=1; - } - } - } - - else if (!memcmp(from, "noexec=", 7)) - noexec_setup(from + 7); + mem_size = memparse(arg, &arg); + limit_regions(mem_size); + user_defined_memmap = 1; + } + return 0; +} +early_param("mem", parse_mem); +static int __init parse_memmap(char *arg) +{ + if (!arg) + return -EINVAL; -#ifdef CONFIG_X86_SMP - /* - * If the BIOS enumerates physical processors before logical, - * maxcpus=N at enumeration-time can be used to disable HT. + if (strcmp(arg, "exactmap") == 0) { +#ifdef CONFIG_CRASH_DUMP + /* If we are doing a crash dump, we + * still need to know the real mem + * size before original memory map is + * reset. */ - else if (!memcmp(from, "maxcpus=", 8)) { - extern unsigned int maxcpus; - - maxcpus = simple_strtoul(from + 8, NULL, 0); - } + find_max_pfn(); + saved_max_pfn = max_pfn; #endif - -#ifdef CONFIG_ACPI - /* "acpi=off" disables both ACPI table parsing and interpreter */ - else if (!memcmp(from, "acpi=off", 8)) { - disable_acpi(); - } - - /* acpi=force to over-ride black-list */ - else if (!memcmp(from, "acpi=force", 10)) { - acpi_force = 1; - acpi_ht = 1; - acpi_disabled = 0; - } - - /* acpi=strict disables out-of-spec workarounds */ - else if (!memcmp(from, "acpi=strict", 11)) { - acpi_strict = 1; - } - - /* Limit ACPI just to boot-time to enable HT */ - else if (!memcmp(from, "acpi=ht", 7)) { - if (!acpi_force) - disable_acpi(); - acpi_ht = 1; - } - - /* "pci=noacpi" disable ACPI IRQ routing and PCI scan */ - else if (!memcmp(from, "pci=noacpi", 10)) { - acpi_disable_pci(); - } - /* "acpi=noirq" disables ACPI interrupt routing */ - else if (!memcmp(from, "acpi=noirq", 10)) { - acpi_noirq_set(); + e820.nr_map = 0; + user_defined_memmap = 1; + } else { + /* If the user specifies memory size, we + * limit the BIOS-provided memory map to + * that size. exactmap can be used to specify + * the exact map. mem=number can be used to + * trim the existing memory map. + */ + unsigned long long start_at, mem_size; + + mem_size = memparse(arg, &arg); + if (*arg == '@') { + start_at = memparse(arg+1, &arg); + add_memory_region(start_at, mem_size, E820_RAM); + } else if (*arg == '#') { + start_at = memparse(arg+1, &arg); + add_memory_region(start_at, mem_size, E820_ACPI); + } else if (*arg == '$') { + start_at = memparse(arg+1, &arg); + add_memory_region(start_at, mem_size, E820_RESERVED); + } else { + limit_regions(mem_size); + user_defined_memmap = 1; } + } + return 0; +} +early_param("memmap", parse_memmap); - else if (!memcmp(from, "acpi_sci=edge", 13)) - acpi_sci_flags.trigger = 1; - - else if (!memcmp(from, "acpi_sci=level", 14)) - acpi_sci_flags.trigger = 3; - - else if (!memcmp(from, "acpi_sci=high", 13)) - acpi_sci_flags.polarity = 1; - - else if (!memcmp(from, "acpi_sci=low", 12)) - acpi_sci_flags.polarity = 3; - -#ifdef CONFIG_X86_IO_APIC - else if (!memcmp(from, "acpi_skip_timer_override", 24)) - acpi_skip_timer_override = 1; - - if (!memcmp(from, "disable_timer_pin_1", 19)) - disable_timer_pin_1 = 1; - if (!memcmp(from, "enable_timer_pin_1", 18)) - disable_timer_pin_1 = -1; +#ifdef CONFIG_PROC_VMCORE +/* elfcorehdr= specifies the location of elf core header + * stored by the crashed kernel. + */ +static int __init parse_elfcorehdr(char *arg) +{ + if (!arg) + return -EINVAL; - /* disable IO-APIC */ - else if (!memcmp(from, "noapic", 6)) - disable_ioapic_setup(); -#endif /* CONFIG_X86_IO_APIC */ -#endif /* CONFIG_ACPI */ + elfcorehdr_addr = memparse(arg, &arg); + return 0; +} +early_param("elfcorehdr", parse_elfcorehdr); +#endif /* CONFIG_PROC_VMCORE */ -#ifdef CONFIG_X86_LOCAL_APIC - /* enable local APIC */ - else if (!memcmp(from, "lapic", 5)) - lapic_enable(); +/* + * highmem=size forces highmem to be exactly 'size' bytes. + * This works even on boxes that have no highmem otherwise. + * This also works to reduce highmem size on bigger boxes. + */ +static int __init parse_highmem(char *arg) +{ + if (!arg) + return -EINVAL; - /* disable local APIC */ - else if (!memcmp(from, "nolapic", 6)) - lapic_disable(); -#endif /* CONFIG_X86_LOCAL_APIC */ + highmem_pages = memparse(arg, &arg) >> PAGE_SHIFT; + return 0; +} +early_param("highmem", parse_highmem); -#ifdef CONFIG_KEXEC - /* crashkernel=size@addr specifies the location to reserve for - * a crash kernel. By reserving this memory we guarantee - * that linux never set's it up as a DMA target. - * Useful for holding code to do something appropriate - * after a kernel panic. - */ - else if (!memcmp(from, "crashkernel=", 12)) { - unsigned long size, base; - size = memparse(from+12, &from); - if (*from == '@') { - base = memparse(from+1, &from); - /* FIXME: Do I want a sanity check - * to validate the memory range? - */ - crashk_res.start = base; - crashk_res.end = base + size - 1; - } - } -#endif -#ifdef CONFIG_PROC_VMCORE - /* elfcorehdr= specifies the location of elf core header - * stored by the crashed kernel. - */ - else if (!memcmp(from, "elfcorehdr=", 11)) - elfcorehdr_addr = memparse(from+11, &from); -#endif +/* + * vmalloc=size forces the vmalloc area to be exactly 'size' + * bytes. This can be used to increase (or decrease) the + * vmalloc area - the default is 128m. + */ +static int __init parse_vmalloc(char *arg) +{ + if (!arg) + return -EINVAL; - /* - * highmem=size forces highmem to be exactly 'size' bytes. - * This works even on boxes that have no highmem otherwise. - * This also works to reduce highmem size on bigger boxes. - */ - else if (!memcmp(from, "highmem=", 8)) - highmem_pages = memparse(from+8, &from) >> PAGE_SHIFT; - - /* - * vmalloc=size forces the vmalloc area to be exactly 'size' - * bytes. This can be used to increase (or decrease) the - * vmalloc area - the default is 128m. - */ - else if (!memcmp(from, "vmalloc=", 8)) - __VMALLOC_RESERVE = memparse(from+8, &from); - - next_char: - c = *(from++); - if (!c) - break; - if (COMMAND_LINE_SIZE <= ++len) - break; - *(to++) = c; - } - *to = '\0'; - *cmdline_p = command_line; - if (userdef) { - printk(KERN_INFO "user-defined physical RAM map:\n"); - print_memory_map("user"); - } + __VMALLOC_RESERVE = memparse(arg, &arg); + return 0; } +early_param("vmalloc", parse_vmalloc); /* * Callback for efi_memory_walk. @@ -1507,17 +1395,15 @@ void __init setup_arch(char **cmdline_p) data_resource.start = virt_to_phys(_etext); data_resource.end = virt_to_phys(_edata)-1; - parse_cmdline_early(cmdline_p); + parse_early_param(); -#ifdef CONFIG_EARLY_PRINTK - { - char *s = strstr(*cmdline_p, "earlyprintk="); - if (s) { - setup_early_printk(strchr(s, '=') + 1); - printk("early console enabled\n"); - } + if (user_defined_memmap) { + printk(KERN_INFO "user-defined physical RAM map:\n"); + print_memory_map("user"); } -#endif + + strlcpy(command_line, saved_command_line, COMMAND_LINE_SIZE); + *cmdline_p = command_line; max_low_pfn = setup_memory(); @@ -1546,7 +1432,7 @@ void __init setup_arch(char **cmdline_p) dmi_scan_machine(); #ifdef CONFIG_X86_GENERICARCH - generic_apic_probe(*cmdline_p); + generic_apic_probe(); #endif if (efi_enabled) efi_map_memmap(); diff --git a/arch/i386/kernel/smpboot.c b/arch/i386/kernel/smpboot.c index 9367af76ce37..517eb3874550 100644 --- a/arch/i386/kernel/smpboot.c +++ b/arch/i386/kernel/smpboot.c @@ -1491,3 +1491,16 @@ void __init smp_intr_init(void) /* IPI for generic function call */ set_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt); } + +/* + * If the BIOS enumerates physical processors before logical, + * maxcpus=N at enumeration-time can be used to disable HT. + */ +static int __init parse_maxcpus(char *arg) +{ + extern unsigned int maxcpus; + + maxcpus = simple_strtoul(arg, NULL, 0); + return 0; +} +early_param("maxcpus", parse_maxcpus); diff --git a/arch/i386/mach-generic/probe.c b/arch/i386/mach-generic/probe.c index 793d1b473251..94b1fd9cbe3c 100644 --- a/arch/i386/mach-generic/probe.c +++ b/arch/i386/mach-generic/probe.c @@ -9,6 +9,7 @@ #include <linux/kernel.h> #include <linux/ctype.h> #include <linux/init.h> +#include <linux/errno.h> #include <asm/fixmap.h> #include <asm/mpspec.h> #include <asm/apicdef.h> @@ -29,7 +30,24 @@ struct genapic *apic_probe[] __initdata = { NULL, }; -static int cmdline_apic; +static int cmdline_apic __initdata; +static int __init parse_apic(char *arg) +{ + int i; + + if (!arg) + return -EINVAL; + + for (i = 0; apic_probe[i]; i++) { + if (!strcmp(apic_probe[i]->name, arg)) { + genapic = apic_probe[i]; + cmdline_apic = 1; + return 0; + } + } + return -ENOENT; +} +early_param("apic", parse_apic); void __init generic_bigsmp_probe(void) { @@ -48,40 +66,20 @@ void __init generic_bigsmp_probe(void) } } -void __init generic_apic_probe(char *command_line) +void __init generic_apic_probe(void) { - char *s; - int i; - int changed = 0; - - s = strstr(command_line, "apic="); - if (s && (s == command_line || isspace(s[-1]))) { - char *p = strchr(s, ' '), old; - if (!p) - p = strchr(s, '\0'); - old = *p; - *p = 0; - for (i = 0; !changed && apic_probe[i]; i++) { - if (!strcmp(apic_probe[i]->name, s+5)) { - changed = 1; + if (!cmdline_apic) { + int i; + for (i = 0; apic_probe[i]; i++) { + if (apic_probe[i]->probe()) { genapic = apic_probe[i]; + break; } } - if (!changed) - printk(KERN_ERR "Unknown genapic `%s' specified.\n", s); - *p = old; - cmdline_apic = changed; - } - for (i = 0; !changed && apic_probe[i]; i++) { - if (apic_probe[i]->probe()) { - changed = 1; - genapic = apic_probe[i]; - } + /* Not visible without early console */ + if (!apic_probe[i]) + panic("Didn't find an APIC driver"); } - /* Not visible without early console */ - if (!changed) - panic("Didn't find an APIC driver"); - printk(KERN_INFO "Using APIC driver %s\n", genapic->name); } diff --git a/arch/i386/mm/init.c b/arch/i386/mm/init.c index d0c2fdf6a4d7..951386606d09 100644 --- a/arch/i386/mm/init.c +++ b/arch/i386/mm/init.c @@ -435,16 +435,22 @@ u64 __supported_pte_mask __read_mostly = ~_PAGE_NX; * on Enable * off Disable */ -void __init noexec_setup(const char *str) +static int __init noexec_setup(char *str) { - if (!strncmp(str, "on",2) && cpu_has_nx) { - __supported_pte_mask |= _PAGE_NX; - disable_nx = 0; - } else if (!strncmp(str,"off",3)) { + if (!str || !strcmp(str, "on")) { + if (cpu_has_nx) { + __supported_pte_mask |= _PAGE_NX; + disable_nx = 0; + } + } else if (!strcmp(str,"off")) { disable_nx = 1; __supported_pte_mask &= ~_PAGE_NX; - } + } else + return -EINVAL; + + return 0; } +early_param("noexec", noexec_setup); int nx_enabled = 0; #ifdef CONFIG_X86_PAE diff --git a/include/asm-i386/acpi.h b/include/asm-i386/acpi.h index 20f523954218..6016632d032f 100644 --- a/include/asm-i386/acpi.h +++ b/include/asm-i386/acpi.h @@ -131,21 +131,7 @@ static inline void disable_acpi(void) extern int acpi_gsi_to_irq(u32 gsi, unsigned int *irq); #ifdef CONFIG_X86_IO_APIC -extern int skip_ioapic_setup; extern int acpi_skip_timer_override; - -static inline void disable_ioapic_setup(void) -{ - skip_ioapic_setup = 1; -} - -static inline int ioapic_setup_disabled(void) -{ - return skip_ioapic_setup; -} - -#else -static inline void disable_ioapic_setup(void) { } #endif static inline void acpi_noirq_set(void) { acpi_noirq = 1; } diff --git a/include/asm-i386/apic.h b/include/asm-i386/apic.h index 2c1e371cebb6..8c5331ceca7b 100644 --- a/include/asm-i386/apic.h +++ b/include/asm-i386/apic.h @@ -42,6 +42,8 @@ static inline void lapic_enable(void) } while (0) +extern void generic_apic_probe(void); + #ifdef CONFIG_X86_LOCAL_APIC /* @@ -117,8 +119,6 @@ extern void enable_APIC_timer(void); extern void enable_NMI_through_LVT0 (void * dummy); -extern int disable_timer_pin_1; - void smp_send_timer_broadcast_ipi(struct pt_regs *regs); void switch_APIC_timer_to_ipi(void *cpumask); void switch_ipi_to_APIC_timer(void *cpumask); diff --git a/include/asm-i386/io_apic.h b/include/asm-i386/io_apic.h index 5092e819b8a2..5d309275a1dc 100644 --- a/include/asm-i386/io_apic.h +++ b/include/asm-i386/io_apic.h @@ -188,6 +188,16 @@ static inline void io_apic_modify(unsigned int apic, unsigned int reg, unsigned /* 1 if "noapic" boot option passed */ extern int skip_ioapic_setup; +static inline void disable_ioapic_setup(void) +{ + skip_ioapic_setup = 1; +} + +static inline int ioapic_setup_disabled(void) +{ + return skip_ioapic_setup; +} + /* * If we use the IO-APIC for IRQ routing, disable automatic * assignment of PCI IRQ's. @@ -206,6 +216,7 @@ extern int (*ioapic_renumber_irq)(int ioapic, int irq); #else /* !CONFIG_X86_IO_APIC */ #define io_apic_assign_pci_irqs 0 +static inline void disable_ioapic_setup(void) { } #endif extern int assign_irq_vector(int irq); diff --git a/include/asm-i386/pgtable.h b/include/asm-i386/pgtable.h index 09697fec3d2b..64140f2f1b95 100644 --- a/include/asm-i386/pgtable.h +++ b/include/asm-i386/pgtable.h @@ -391,8 +391,6 @@ extern pte_t *lookup_address(unsigned long address); static inline int set_kernel_exec(unsigned long vaddr, int enable) { return 0;} #endif -extern void noexec_setup(const char *str); - #if defined(CONFIG_HIGHPTE) #define pte_offset_map(dir, address) \ ((pte_t *)kmap_atomic(pmd_page(*(dir)),KM_PTE0) + pte_index(address)) |