aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--Documentation/devicetree/bindings/net/btusb.txt3
-rw-r--r--Documentation/devicetree/bindings/net/mediatek-bluetooth.txt64
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi13
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi46
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi13
-rw-r--r--drivers/bluetooth/btmtkuart.c281
-rw-r--r--drivers/bluetooth/btqcomsmd.c31
-rw-r--r--drivers/bluetooth/btusb.c2
-rw-r--r--drivers/bluetooth/hci_ldisc.c3
-rw-r--r--drivers/bluetooth/hci_qca.c50
-rw-r--r--include/net/bluetooth/hci.h12
-rw-r--r--net/bluetooth/hci_core.c43
-rw-r--r--net/bluetooth/mgmt.c14
13 files changed, 478 insertions, 97 deletions
diff --git a/Documentation/devicetree/bindings/net/btusb.txt b/Documentation/devicetree/bindings/net/btusb.txt
index 37d67926dd6d..b1ad6ee68e90 100644
--- a/Documentation/devicetree/bindings/net/btusb.txt
+++ b/Documentation/devicetree/bindings/net/btusb.txt
@@ -9,6 +9,9 @@ Required properties:
(more may be added later) are:
"usb1286,204e" (Marvell 8997)
+ "usbcf3,e300" (Qualcomm QCA6174A)
+ "usb4ca,301a" (Qualcomm QCA6174A (Lite-On))
+
Also, vendors that use btusb may have device additional properties, e.g:
Documentation/devicetree/bindings/net/marvell-bt-8xxx.txt
diff --git a/Documentation/devicetree/bindings/net/mediatek-bluetooth.txt b/Documentation/devicetree/bindings/net/mediatek-bluetooth.txt
index 14ceb2a5b4e8..41a7dcc80f5b 100644
--- a/Documentation/devicetree/bindings/net/mediatek-bluetooth.txt
+++ b/Documentation/devicetree/bindings/net/mediatek-bluetooth.txt
@@ -33,3 +33,67 @@ Example:
clock-names = "ref";
};
};
+
+MediaTek UART based Bluetooth Devices
+==================================
+
+This device is a serial attached device to UART device and thus it must be a
+child node of the serial node with UART.
+
+Please refer to the following documents for generic properties:
+
+ Documentation/devicetree/bindings/serial/slave-device.txt
+
+Required properties:
+
+- compatible: Must be
+ "mediatek,mt7663u-bluetooth": for MT7663U device
+ "mediatek,mt7668u-bluetooth": for MT7668U device
+- vcc-supply: Main voltage regulator
+- pinctrl-names: Should be "default", "runtime"
+- pinctrl-0: Should contain UART RXD low when the device is powered up to
+ enter proper bootstrap mode.
+- pinctrl-1: Should contain UART mode pin ctrl
+
+Optional properties:
+
+- reset-gpios: GPIO used to reset the device whose initial state keeps low,
+ if the GPIO is missing, then board-level design should be
+ guaranteed.
+- current-speed: Current baud rate of the device whose defaults to 921600
+
+Example:
+
+ uart1_pins_boot: uart1-default {
+ pins-dat {
+ pinmux = <MT7623_PIN_81_URXD1_FUNC_GPIO81>;
+ output-low;
+ };
+ };
+
+ uart1_pins_runtime: uart1-runtime {
+ pins-dat {
+ pinmux = <MT7623_PIN_81_URXD1_FUNC_URXD1>,
+ <MT7623_PIN_82_UTXD1_FUNC_UTXD1>;
+ };
+ };
+
+ uart1: serial@11003000 {
+ compatible = "mediatek,mt7623-uart",
+ "mediatek,mt6577-uart";
+ reg = <0 0x11003000 0 0x400>;
+ interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&pericfg CLK_PERI_UART1_SEL>,
+ <&pericfg CLK_PERI_UART1>;
+ clock-names = "baud", "bus";
+
+ bluetooth {
+ compatible = "mediatek,mt7663u-bluetooth";
+ vcc-supply = <&reg_5v>;
+ reset-gpios = <&pio 24 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default", "runtime";
+ pinctrl-0 = <&uart1_pins_boot>;
+ pinctrl-1 = <&uart1_pins_runtime>;
+ current-speed = <921600>;
+ };
+ };
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi
index c400be64170e..931640e9aed4 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi
@@ -200,6 +200,19 @@
pinctrl-0 = <&bl_en>;
pwm-delay-us = <10000>;
};
+
+ gpio_keys: gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&bt_host_wake_l>;
+
+ wake_on_bt: wake-on-bt {
+ label = "Wake-on-Bluetooth";
+ gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WAKEUP>;
+ wakeup-source;
+ };
+ };
};
&ppvar_bigcpu {
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi
index fc50b3ef758c..62ea7d6a7d4a 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi
@@ -175,6 +175,21 @@
pinctrl-0 = <&dmic_en>;
wakeup-delay-ms = <250>;
};
+
+ gpio_keys: gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pen_eject_odl>;
+
+ pen-insert {
+ label = "Pen Insert";
+ /* Insert = low, eject = high */
+ gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+ linux,code = <SW_PEN_INSERTED>;
+ linux,input-type = <EV_SW>;
+ wakeup-source;
+ };
+ };
};
/* pp900_s0 aliases */
@@ -328,20 +343,6 @@ camera: &i2c7 {
<400000000>;
};
-&gpio_keys {
- pinctrl-names = "default";
- pinctrl-0 = <&bt_host_wake_l>, <&pen_eject_odl>;
-
- pen-insert {
- label = "Pen Insert";
- /* Insert = low, eject = high */
- gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
- linux,code = <SW_PEN_INSERTED>;
- linux,input-type = <EV_SW>;
- wakeup-source;
- };
-};
-
&i2c_tunnel {
google,remote-bus = <0>;
};
@@ -437,8 +438,19 @@ camera: &i2c7 {
status = "okay";
};
-&wake_on_bt {
- gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+&usb_host0_ohci {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ qca_bt: bluetooth@1 {
+ compatible = "usbcf3,e300", "usb4ca,301a";
+ reg = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&bt_host_wake_l>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "wakeup";
+ };
};
/* PINCTRL OVERRIDES */
@@ -455,7 +467,7 @@ camera: &i2c7 {
};
&bt_host_wake_l {
- rockchip,pins = <1 2 RK_FUNC_GPIO &pcfg_pull_up>;
+ rockchip,pins = <1 2 RK_FUNC_GPIO &pcfg_pull_none>;
};
&ec_ap_int_l {
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
index ea607a601a86..da03fa9c5662 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
@@ -269,19 +269,6 @@
#clock-cells = <0>;
};
- gpio_keys: gpio-keys {
- compatible = "gpio-keys";
- pinctrl-names = "default";
- pinctrl-0 = <&bt_host_wake_l>;
-
- wake_on_bt: wake-on-bt {
- label = "Wake-on-Bluetooth";
- gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WAKEUP>;
- wakeup-source;
- };
- };
-
max98357a: max98357a {
compatible = "maxim,max98357a";
pinctrl-names = "default";
diff --git a/drivers/bluetooth/btmtkuart.c b/drivers/bluetooth/btmtkuart.c
index e73b1013ba73..b0b680dd69f4 100644
--- a/drivers/bluetooth/btmtkuart.c
+++ b/drivers/bluetooth/btmtkuart.c
@@ -12,11 +12,15 @@
#include <linux/atomic.h>
#include <linux/clk.h>
#include <linux/firmware.h>
+#include <linux/gpio/consumer.h>
#include <linux/iopoll.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/pinctrl/consumer.h>
#include <linux/pm_runtime.h>
+#include <linux/regulator/consumer.h>
#include <linux/serdev.h>
#include <linux/skbuff.h>
@@ -25,18 +29,26 @@
#include "h4_recv.h"
-#define VERSION "0.1"
+#define VERSION "0.2"
#define FIRMWARE_MT7622 "mediatek/mt7622pr2h.bin"
+#define FIRMWARE_MT7663 "mediatek/mt7663pr2h.bin"
+#define FIRMWARE_MT7668 "mediatek/mt7668pr2h.bin"
#define MTK_STP_TLR_SIZE 2
#define BTMTKUART_TX_STATE_ACTIVE 1
#define BTMTKUART_TX_STATE_WAKEUP 2
#define BTMTKUART_TX_WAIT_VND_EVT 3
+#define BTMTKUART_REQUIRED_WAKEUP 4
+
+#define BTMTKUART_FLAG_STANDALONE_HW BIT(0)
enum {
MTK_WMT_PATCH_DWNLD = 0x1,
+ MTK_WMT_TEST = 0x2,
+ MTK_WMT_WAKEUP = 0x3,
+ MTK_WMT_HIF = 0x4,
MTK_WMT_FUNC_CTRL = 0x6,
MTK_WMT_RST = 0x7,
MTK_WMT_SEMAPHORE = 0x17,
@@ -57,6 +69,11 @@ struct mtk_stp_hdr {
u8 cs;
} __packed;
+struct btmtkuart_data {
+ unsigned int flags;
+ const char *fwname;
+};
+
struct mtk_wmt_hdr {
u8 dir;
u8 op;
@@ -100,6 +117,14 @@ struct btmtkuart_dev {
struct serdev_device *serdev;
struct clk *clk;
+ struct regulator *vcc;
+ struct gpio_desc *reset;
+ struct pinctrl *pinctrl;
+ struct pinctrl_state *pins_runtime;
+ struct pinctrl_state *pins_boot;
+ speed_t desired_speed;
+ speed_t curr_speed;
+
struct work_struct tx_work;
unsigned long tx_state;
struct sk_buff_head txq;
@@ -110,8 +135,15 @@ struct btmtkuart_dev {
u8 stp_pad[6];
u8 stp_cursor;
u16 stp_dlen;
+
+ const struct btmtkuart_data *data;
};
+#define btmtkuart_is_standalone(bdev) \
+ ((bdev)->data->flags & BTMTKUART_FLAG_STANDALONE_HW)
+#define btmtkuart_is_builtin_soc(bdev) \
+ !((bdev)->data->flags & BTMTKUART_FLAG_STANDALONE_HW)
+
static int mtk_hci_wmt_sync(struct hci_dev *hdev,
struct btmtk_hci_wmt_params *wmt_params)
{
@@ -202,7 +234,7 @@ err_free_skb:
return err;
}
-static int mtk_setup_fw(struct hci_dev *hdev)
+static int mtk_setup_firmware(struct hci_dev *hdev, const char *fwname)
{
struct btmtk_hci_wmt_params wmt_params;
const struct firmware *fw;
@@ -211,7 +243,7 @@ static int mtk_setup_fw(struct hci_dev *hdev)
int err, dlen;
u8 flag;
- err = request_firmware(&fw, FIRMWARE_MT7622, &hdev->dev);
+ err = request_firmware(&fw, fwname, &hdev->dev);
if (err < 0) {
bt_dev_err(hdev, "Failed to load firmware file (%d)", err);
return err;
@@ -523,6 +555,23 @@ static int btmtkuart_open(struct hci_dev *hdev)
goto err_open;
}
+ if (btmtkuart_is_standalone(bdev)) {
+ if (bdev->curr_speed != bdev->desired_speed)
+ err = serdev_device_set_baudrate(bdev->serdev,
+ 115200);
+ else
+ err = serdev_device_set_baudrate(bdev->serdev,
+ bdev->desired_speed);
+
+ if (err < 0) {
+ bt_dev_err(hdev, "Unable to set baudrate UART device %s",
+ dev_name(&bdev->serdev->dev));
+ goto err_serdev_close;
+ }
+
+ serdev_device_set_flow_control(bdev->serdev, false);
+ }
+
bdev->stp_cursor = 2;
bdev->stp_dlen = 0;
@@ -546,6 +595,8 @@ err_put_rpm:
pm_runtime_put_sync(dev);
err_disable_rpm:
pm_runtime_disable(dev);
+err_serdev_close:
+ serdev_device_close(bdev->serdev);
err_open:
return err;
}
@@ -606,8 +657,74 @@ static int btmtkuart_func_query(struct hci_dev *hdev)
return status;
}
+static int btmtkuart_change_baudrate(struct hci_dev *hdev)
+{
+ struct btmtkuart_dev *bdev = hci_get_drvdata(hdev);
+ struct btmtk_hci_wmt_params wmt_params;
+ u32 baudrate;
+ u8 param;
+ int err;
+
+ /* Indicate the device to enter the probe state the host is
+ * ready to change a new baudrate.
+ */
+ baudrate = cpu_to_le32(bdev->desired_speed);
+ wmt_params.op = MTK_WMT_HIF;
+ wmt_params.flag = 1;
+ wmt_params.dlen = 4;
+ wmt_params.data = &baudrate;
+ wmt_params.status = NULL;
+
+ err = mtk_hci_wmt_sync(hdev, &wmt_params);
+ if (err < 0) {
+ bt_dev_err(hdev, "Failed to device baudrate (%d)", err);
+ return err;
+ }
+
+ err = serdev_device_set_baudrate(bdev->serdev,
+ bdev->desired_speed);
+ if (err < 0) {
+ bt_dev_err(hdev, "Failed to set up host baudrate (%d)",
+ err);
+ return err;
+ }
+
+ serdev_device_set_flow_control(bdev->serdev, false);
+
+ /* Send a dummy byte 0xff to activate the new baudrate */
+ param = 0xff;
+ err = serdev_device_write(bdev->serdev, &param, sizeof(param),
+ MAX_SCHEDULE_TIMEOUT);
+ if (err < 0 || err < sizeof(param))
+ return err;
+
+ serdev_device_wait_until_sent(bdev->serdev, 0);
+
+ /* Wait some time for the device changing baudrate done */
+ usleep_range(20000, 22000);
+
+ /* Test the new baudrate */
+ wmt_params.op = MTK_WMT_TEST;
+ wmt_params.flag = 7;
+ wmt_params.dlen = 0;
+ wmt_params.data = NULL;
+ wmt_params.status = NULL;
+
+ err = mtk_hci_wmt_sync(hdev, &wmt_params);
+ if (err < 0) {
+ bt_dev_err(hdev, "Failed to test new baudrate (%d)",
+ err);
+ return err;
+ }
+
+ bdev->curr_speed = bdev->desired_speed;
+
+ return 0;
+}
+
static int btmtkuart_setup(struct hci_dev *hdev)
{
+ struct btmtkuart_dev *bdev = hci_get_drvdata(hdev);
struct btmtk_hci_wmt_params wmt_params;
ktime_t calltime, delta, rettime;
struct btmtk_tci_sleep tci_sleep;
@@ -618,6 +735,28 @@ static int btmtkuart_setup(struct hci_dev *hdev)
calltime = ktime_get();
+ /* Wakeup MCUSYS is required for certain devices before we start to
+ * do any setups.
+ */
+ if (test_bit(BTMTKUART_REQUIRED_WAKEUP, &bdev->tx_state)) {
+ wmt_params.op = MTK_WMT_WAKEUP;
+ wmt_params.flag = 3;
+ wmt_params.dlen = 0;
+ wmt_params.data = NULL;
+ wmt_params.status = NULL;
+
+ err = mtk_hci_wmt_sync(hdev, &wmt_params);
+ if (err < 0) {
+ bt_dev_err(hdev, "Failed to wakeup the chip (%d)", err);
+ return err;
+ }
+
+ clear_bit(BTMTKUART_REQUIRED_WAKEUP, &bdev->tx_state);
+ }
+
+ if (btmtkuart_is_standalone(bdev))
+ btmtkuart_change_baudrate(hdev);
+
/* Query whether the firmware is already download */
wmt_params.op = MTK_WMT_SEMAPHORE;
wmt_params.flag = 1;
@@ -637,7 +776,7 @@ static int btmtkuart_setup(struct hci_dev *hdev)
}
/* Setup a firmware which the device definitely requires */
- err = mtk_setup_fw(hdev);
+ err = mtk_setup_firmware(hdev, bdev->data->fwname);
if (err < 0)
return err;
@@ -754,24 +893,82 @@ static int btmtkuart_send_frame(struct hci_dev *hdev, struct sk_buff *skb)
return 0;
}
+static int btmtkuart_parse_dt(struct serdev_device *serdev)
+{
+ struct btmtkuart_dev *bdev = serdev_device_get_drvdata(serdev);
+ struct device_node *node = serdev->dev.of_node;
+ u32 speed = 921600;
+ int err;
+
+ if (btmtkuart_is_standalone(bdev)) {
+ of_property_read_u32(node, "current-speed", &speed);
+
+ bdev->desired_speed = speed;
+
+ bdev->vcc = devm_regulator_get(&serdev->dev, "vcc");
+ if (IS_ERR(bdev->vcc)) {
+ err = PTR_ERR(bdev->vcc);
+ return err;
+ }
+
+ bdev->pinctrl = devm_pinctrl_get(&serdev->dev);
+ if (IS_ERR(bdev->pinctrl)) {
+ err = PTR_ERR(bdev->pinctrl);
+ return err;
+ }
+
+ bdev->pins_boot = pinctrl_lookup_state(bdev->pinctrl,
+ "default");
+ if (IS_ERR(bdev->pins_boot)) {
+ err = PTR_ERR(bdev->pins_boot);
+ return err;
+ }
+
+ bdev->pins_runtime = pinctrl_lookup_state(bdev->pinctrl,
+ "runtime");
+ if (IS_ERR(bdev->pins_runtime)) {
+ err = PTR_ERR(bdev->pins_runtime);
+ return err;
+ }
+
+ bdev->reset = devm_gpiod_get_optional(&serdev->dev, "reset",
+ GPIOD_OUT_LOW);
+ if (IS_ERR(bdev->reset)) {
+ err = PTR_ERR(bdev->reset);
+ return err;
+ }
+ } else if (btmtkuart_is_builtin_soc(bdev)) {
+ bdev->clk = devm_clk_get(&serdev->dev, "ref");
+ if (IS_ERR(bdev->clk))
+ return PTR_ERR(bdev->clk);
+ }
+
+ return 0;
+}
+
static int btmtkuart_probe(struct serdev_device *serdev)
{
struct btmtkuart_dev *bdev;
struct hci_dev *hdev;
+ int err;
bdev = devm_kzalloc(&serdev->dev, sizeof(*bdev), GFP_KERNEL);
if (!bdev)
return -ENOMEM;
- bdev->clk = devm_clk_get(&serdev->dev, "ref");
- if (IS_ERR(bdev->clk))
- return PTR_ERR(bdev->clk);
+ bdev->data = of_device_get_match_data(&serdev->dev);
+ if (!bdev->data)
+ return -ENODEV;
bdev->serdev = serdev;
serdev_device_set_drvdata(serdev, bdev);
serdev_device_set_client_ops(serdev, &btmtkuart_client_ops);
+ err = btmtkuart_parse_dt(serdev);
+ if (err < 0)
+ return err;
+
INIT_WORK(&bdev->tx_work, btmtkuart_tx_work);
skb_queue_head_init(&bdev->txq);
@@ -798,13 +995,54 @@ static int btmtkuart_probe(struct serdev_device *serdev)
hdev->manufacturer = 70;
set_bit(HCI_QUIRK_NON_PERSISTENT_SETUP, &hdev->quirks);
- if (hci_register_dev(hdev) < 0) {
+ if (btmtkuart_is_standalone(bdev)) {
+ /* Switch to the specific pin state for the booting requires */
+ pinctrl_select_state(bdev->pinctrl, bdev->pins_boot);
+
+ /* Power on */
+ err = regulator_enable(bdev->vcc);
+ if (err < 0)
+ return err;
+
+ /* Reset if the reset-gpios is available otherwise the board
+ * -level design should be guaranteed.
+ */
+ if (bdev->reset) {
+ gpiod_set_value_cansleep(bdev->reset, 1);
+ usleep_range(1000, 2000);
+ gpiod_set_value_cansleep(bdev->reset, 0);
+ }
+
+ /* Wait some time until device got ready and switch to the pin
+ * mode the device requires for UART transfers.
+ */
+ msleep(50);
+ pinctrl_select_state(bdev->pinctrl, bdev->pins_runtime);
+
+ /* A standalone device doesn't depends on power domain on SoC,
+ * so mark it as no callbacks.
+ */
+ pm_runtime_no_callbacks(&serdev->dev);
+
+ set_bit(BTMTKUART_REQUIRED_WAKEUP, &bdev->tx_state);
+ }
+
+ err = hci_register_dev(hdev);
+ if (err < 0) {
dev_err(&serdev->dev, "Can't register HCI device\n");
hci_free_dev(hdev);
- return -ENODEV;
+ goto err_regulator_disable;
}
return 0;
+
+err_regulator_disable:
+ if (btmtkuart_is_standalone(bdev)) {
+ pinctrl_select_state(bdev->pinctrl, bdev->pins_boot);
+ regulator_disable(bdev->vcc);
+ }
+
+ return err;
}
static void btmtkuart_remove(struct serdev_device *serdev)
@@ -812,13 +1050,34 @@ static void btmtkuart_remove(struct serdev_device *serdev)
struct btmtkuart_dev *bdev = serdev_device_get_drvdata(serdev);
struct hci_dev *hdev = bdev->hdev;
+ if (btmtkuart_is_standalone(bdev)) {
+ pinctrl_select_state(bdev->pinctrl, bdev->pins_boot);
+ regulator_disable(bdev->vcc);
+ }
+
hci_unregister_dev(hdev);
hci_free_dev(hdev);
}
+static const struct btmtkuart_data mt7622_data = {
+ .fwname = FIRMWARE_MT7622,
+};
+
+static const struct btmtkuart_data mt7663_data = {
+ .flags = BTMTKUART_FLAG_STANDALONE_HW,
+ .fwname = FIRMWARE_MT7663,
+};
+
+static const struct btmtkuart_data mt7668_data = {
+ .flags = BTMTKUART_FLAG_STANDALONE_HW,
+ .fwname = FIRMWARE_MT7668,
+};
+
#ifdef CONFIG_OF
static const struct of_device_id mtk_of_match_table[] = {
- { .compatible = "mediatek,mt7622-bluetooth"},
+ { .compatible = "mediatek,mt7622-bluetooth", .data = &mt7622_data},
+ { .compatible = "mediatek,mt7663u-bluetooth", .data = &mt7663_data},
+ { .compatible = "mediatek,mt7668u-bluetooth", .data = &mt7668_data},
{ }
};
MODULE_DEVICE_TABLE(of, mtk_of_match_table);
@@ -840,3 +1099,5 @@ MODULE_DESCRIPTION("MediaTek Bluetooth Serial driver ver " VERSION);
MODULE_VERSION(VERSION);
MODULE_LICENSE("GPL");
MODULE_FIRMWARE(FIRMWARE_MT7622);
+MODULE_FIRMWARE(FIRMWARE_MT7663);
+MODULE_FIRMWARE(FIRMWARE_MT7668);
diff --git a/drivers/bluetooth/btqcomsmd.c b/drivers/bluetooth/btqcomsmd.c
index 7df3eed1ef5e..e0d4c6f1d3ab 100644
--- a/drivers/bluetooth/btqcomsmd.c
+++ b/drivers/bluetooth/btqcomsmd.c
@@ -28,7 +28,6 @@
struct btqcomsmd {
struct hci_dev *hdev;
- bdaddr_t bdaddr;
struct rpmsg_endpoint *acl_channel;
struct rpmsg_endpoint *cmd_channel;
};
@@ -116,32 +115,17 @@ static int btqcomsmd_close(struct hci_dev *hdev)
static int btqcomsmd_setup(struct hci_dev *hdev)
{
- struct btqcomsmd *btq = hci_get_drvdata(hdev);
struct sk_buff *skb;
- int err;
skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_INIT_TIMEOUT);
if (IS_ERR(skb))
return PTR_ERR(skb);
kfree_skb(skb);
- /* Devices do not have persistent storage for BD address. If no
- * BD address has been retrieved during probe, mark the device
- * as having an invalid BD address.
- */
- if (!bacmp(&btq->bdaddr, BDADDR_ANY)) {
- set_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks);
- return 0;
- }
-
- /* When setting a configured BD address fails, mark the device
- * as having an invalid BD address.
+ /* Devices do not have persistent storage for BD address. Retrieve
+ * it from the firmware node property.
*/
- err = qca_set_bdaddr_rome(hdev, &btq->bdaddr);
- if (err) {
- set_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks);
- return 0;
- }
+ set_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks);
return 0;
}
@@ -169,15 +153,6 @@ static int btqcomsmd_probe(struct platform_device *pdev)
if (IS_ERR(btq->cmd_channel))
return PTR_ERR(btq->cmd_channel);
- /* The local-bd-address property is usually injected by the
- * bootloader which has access to the allocated BD address.
- */
- if (!of_property_read_u8_array(pdev->dev.of_node, "local-bd-address",
- (u8 *)&btq->bdaddr, sizeof(bdaddr_t))) {
- dev_info(&pdev->dev, "BD address %pMR retrieved from device-tree",
- &btq->bdaddr);
- }
-
hdev = hci_alloc_dev();
if (!hdev)
return -ENOMEM;
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index d4c8d989e714..ded198328f21 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -2917,6 +2917,8 @@ static irqreturn_t btusb_oob_wake_handler(int irq, void *priv)
static const struct of_device_id btusb_match_table[] = {
{ .compatible = "usb1286,204e" },
+ { .compatible = "usbcf3,e300" }, /* QCA6174A */
+ { .compatible = "usb4ca,301a" }, /* QCA6174A (Lite-On) */
{ }
};
MODULE_DEVICE_TABLE(of, btusb_match_table);
diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c
index 4918fefc4a6f..9562e72c1ae5 100644
--- a/drivers/bluetooth/hci_ldisc.c
+++ b/drivers/bluetooth/hci_ldisc.c
@@ -696,14 +696,13 @@ static int hci_uart_set_proto(struct hci_uart *hu, int id)
return -EPROTONOSUPPORT;
hu->proto = p;
- set_bit(HCI_UART_PROTO_READY, &hu->flags);
err = hci_uart_register_dev(hu);
if (err) {
- clear_bit(HCI_UART_PROTO_READY, &hu->flags);
return err;
}
+ set_bit(HCI_UART_PROTO_READY, &hu->flags);
return 0;
}
diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index 5e03504c4e0c..237aea34b69f 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -59,8 +59,7 @@
#define IBS_WAKE_RETRANS_TIMEOUT_MS 100
#define IBS_TX_IDLE_TIMEOUT_MS 2000
-#define BAUDRATE_SETTLE_TIMEOUT_MS 300
-#define POWER_PULSE_TRANS_TIMEOUT_MS 100
+#define CMD_TRANS_TIMEOUT_MS 100
/* susclk rate */
#define SUSCLK_RATE_32KHZ 32768
@@ -964,6 +963,7 @@ static int qca_set_baudrate(struct hci_dev *hdev, uint8_t baudrate)
{
struct hci_uart *hu = hci_get_drvdata(hdev);
struct qca_data *qca = hu->priv;
+ struct qca_serdev *qcadev;
struct sk_buff *skb;
u8 cmd[] = { 0x01, 0x48, 0xFC, 0x01, 0x00 };
@@ -985,13 +985,21 @@ static int qca_set_baudrate(struct hci_dev *hdev, uint8_t baudrate)
skb_queue_tail(&qca->txq, skb);
hci_uart_tx_wakeup(hu);
- /* wait 300ms to change new baudrate on controller side
- * controller will come back after they receive this HCI command
- * then host can communicate with new baudrate to controller
- */
- set_current_state(TASK_UNINTERRUPTIBLE);
- schedule_timeout(msecs_to_jiffies(BAUDRATE_SETTLE_TIMEOUT_MS));
- set_current_state(TASK_RUNNING);
+ qcadev = serdev_device_get_drvdata(hu->serdev);
+
+ /* Wait for the baudrate change request to be sent */
+
+ while (!skb_queue_empty(&qca->txq))
+ usleep_range(100, 200);
+
+ serdev_device_wait_until_sent(hu->serdev,
+ msecs_to_jiffies(CMD_TRANS_TIMEOUT_MS));
+
+ /* Give the controller time to process the request */
+ if (qcadev->btsoc_type == QCA_WCN3990)
+ msleep(10);
+ else
+ msleep(300);
return 0;
}
@@ -1004,10 +1012,11 @@ static inline void host_set_baudrate(struct hci_uart *hu, unsigned int speed)
hci_uart_set_baudrate(hu, speed);
}
-static int qca_send_power_pulse(struct hci_uart *hu, u8 cmd)
+static int qca_send_power_pulse(struct hci_uart *hu, bool on)
{
int ret;
- int timeout = msecs_to_jiffies(POWER_PULSE_TRANS_TIMEOUT_MS);
+ int timeout = msecs_to_jiffies(CMD_TRANS_TIMEOUT_MS);
+ u8 cmd = on ? QCA_WCN3990_POWERON_PULSE : QCA_WCN3990_POWEROFF_PULSE;
/* These power pulses are single byte command which are sent
* at required baudrate to wcn3990. On wcn3990, we have an external
@@ -1030,11 +1039,14 @@ static int qca_send_power_pulse(struct hci_uart *hu, u8 cmd)
}
serdev_device_wait_until_sent(hu->serdev, timeout);
-
- /* Wait for 100 uS for SoC to settle down */
- usleep_range(100, 200);
hci_uart_set_flow_control(hu, false);
+ /* Give to controller time to boot/shutdown */
+ if (on)
+ msleep(100);
+ else
+ msleep(10);
+
return 0;
}
@@ -1138,18 +1150,15 @@ static int qca_wcn3990_init(struct hci_uart *hu)
/* Forcefully enable wcn3990 to enter in to boot mode. */
host_set_baudrate(hu, 2400);
- ret = qca_send_power_pulse(hu, QCA_WCN3990_POWEROFF_PULSE);
+ ret = qca_send_power_pulse(hu, false);
if (ret)
return ret;
qca_set_speed(hu, QCA_INIT_SPEED);
- ret = qca_send_power_pulse(hu, QCA_WCN3990_POWERON_PULSE);
+ ret = qca_send_power_pulse(hu, true);
if (ret)
return ret;
- /* Wait for 100 ms for SoC to boot */
- msleep(100);
-
/* Now the device is in ready state to communicate with host.
* To sync host with device we need to reopen port.
* Without this, we will have RTS and CTS synchronization
@@ -1192,6 +1201,7 @@ static int qca_setup(struct hci_uart *hu)
* setup for every hci up.
*/
set_bit(HCI_QUIRK_NON_PERSISTENT_SETUP, &hdev->quirks);
+ set_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks);
hu->hdev->shutdown = qca_power_off;
ret = qca_wcn3990_init(hu);
if (ret)
@@ -1289,7 +1299,7 @@ static void qca_power_shutdown(struct hci_uart *hu)
spin_unlock_irqrestore(&qca->hci_ibs_lock, flags);
host_set_baudrate(hu, 2400);
- qca_send_power_pulse(hu, QCA_WCN3990_POWEROFF_PULSE);
+ qca_send_power_pulse(hu, false);
qca_power_setup(hu, false);
}
diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h
index c36dc1e20556..fbba43e9bef5 100644
--- a/include/net/bluetooth/hci.h
+++ b/include/net/bluetooth/hci.h
@@ -158,6 +158,18 @@ enum {
*/
HCI_QUIRK_INVALID_BDADDR,
+ /* When this quirk is set, the public Bluetooth address
+ * initially reported by HCI Read BD Address command
+ * is considered invalid. The public BD Address can be
+ * specified in the fwnode property 'local-bd-address'.
+ * If this property does not exist or is invalid controller
+ * configuration is required before this device can be used.
+ *
+ * This quirk can be set before hci_register_dev is called or
+ * during the hdev->setup vendor callback.
+ */
+ HCI_QUIRK_USE_BDADDR_PROPERTY,
+
/* When this quirk is set, the duplicate filtering during
* scanning is based on Bluetooth devices addresses. To allow
* RSSI based updates, restart scanning if needed.
diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index 26e3d36aee29..d6b2540ba7f8 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -30,6 +30,7 @@
#include <linux/rfkill.h>
#include <linux/debugfs.h>
#include <linux/crypto.h>
+#include <linux/property.h>
#include <asm/unaligned.h>
#include <net/bluetooth/bluetooth.h>
@@ -1355,6 +1356,32 @@ done:
return err;
}
+/**
+ * hci_dev_get_bd_addr_from_property - Get the Bluetooth Device Address
+ * (BD_ADDR) for a HCI device from
+ * a firmware node property.
+ * @hdev: The HCI device
+ *
+ * Search the firmware node for 'local-bd-address'.
+ *
+ * All-zero BD addresses are rejected, because those could be properties
+ * that exist in the firmware tables, but were not updated by the firmware. For
+ * example, the DTS could define 'local-bd-address', with zero BD addresses.
+ */
+static void hci_dev_get_bd_addr_from_property(struct hci_dev *hdev)
+{
+ struct fwnode_handle *fwnode = dev_fwnode(hdev->dev.parent);
+ bdaddr_t ba;
+ int ret;
+
+ ret = fwnode_property_read_u8_array(fwnode, "local-bd-address",
+ (u8 *)&ba, sizeof(ba));
+ if (ret < 0 || !bacmp(&ba, BDADDR_ANY))
+ return;
+
+ bacpy(&hdev->public_addr, &ba);
+}
+
static int hci_dev_do_open(struct hci_dev *hdev)
{
int ret = 0;
@@ -1422,6 +1449,22 @@ static int hci_dev_do_open(struct hci_dev *hdev)
if (hdev->setup)
ret = hdev->setup(hdev);
+ if (ret)
+ goto setup_failed;
+
+ if (test_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks)) {
+ if (!bacmp(&hdev->public_addr, BDADDR_ANY))
+ hci_dev_get_bd_addr_from_property(hdev);
+
+ if (bacmp(&hdev->public_addr, BDADDR_ANY) &&
+ hdev->set_bdaddr)
+ ret = hdev->set_bdaddr(hdev,
+ &hdev->public_addr);
+ else
+ ret = -EADDRNOTAVAIL;
+ }
+
+setup_failed:
/* The transport driver can set these quirks before
* creating the HCI device or in its setup callback.
*
diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c
index ccce954f8146..2457f408d17d 100644
--- a/net/bluetooth/mgmt.c
+++ b/net/bluetooth/mgmt.c
@@ -474,7 +474,6 @@ static int read_ext_index_list(struct sock *sk, struct hci_dev *hdev,
{
struct mgmt_rp_read_ext_index_list *rp;
struct hci_dev *d;
- size_t rp_len;
u16 count;
int err;
@@ -488,8 +487,7 @@ static int read_ext_index_list(struct sock *sk, struct hci_dev *hdev,
count++;
}
- rp_len = sizeof(*rp) + (sizeof(rp->entry[0]) * count);
- rp = kmalloc(rp_len, GFP_ATOMIC);
+ rp = kmalloc(struct_size(rp, entry, count), GFP_ATOMIC);
if (!rp) {
read_unlock(&hci_dev_list_lock);
return -ENOMEM;
@@ -525,7 +523,6 @@ static int read_ext_index_list(struct sock *sk, struct hci_dev *hdev,
}
rp->num_controllers = cpu_to_le16(count);
- rp_len = sizeof(*rp) + (sizeof(rp->entry[0]) * count);
read_unlock(&hci_dev_list_lock);
@@ -538,7 +535,8 @@ static int read_ext_index_list(struct sock *sk, struct hci_dev *hdev,
hci_sock_clear_flag(sk, HCI_MGMT_UNCONF_INDEX_EVENTS);
err = mgmt_cmd_complete(sk, MGMT_INDEX_NONE,
- MGMT_OP_READ_EXT_INDEX_LIST, 0, rp, rp_len);
+ MGMT_OP_READ_EXT_INDEX_LIST, 0, rp,
+ struct_size(rp, entry, count));
kfree(rp);
@@ -551,7 +549,8 @@ static bool is_configured(struct hci_dev *hdev)
!hci_dev_test_flag(hdev, HCI_EXT_CONFIGURED))
return false;
- if (test_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks) &&
+ if ((test_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks) ||
+ test_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks)) &&
!bacmp(&hdev->public_addr, BDADDR_ANY))
return false;
@@ -566,7 +565,8 @@ static __le32 get_missing_options(struct hci_dev *hdev)
!hci_dev_test_flag(hdev, HCI_EXT_CONFIGURED))
options |= MGMT_OPTION_EXTERNAL_CONFIG;
- if (test_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks) &&
+ if ((test_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks) ||
+ test_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks)) &&
!bacmp(&hdev->public_addr, BDADDR_ANY))
options |= MGMT_OPTION_PUBLIC_ADDRESS;
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.