aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--Documentation/devicetree/bindings/usb/usb251xb.txt6
-rw-r--r--drivers/usb/core/hcd.c4
-rw-r--r--drivers/usb/host/ehci-pci.c4
-rw-r--r--drivers/usb/host/hwa-hc.c2
-rw-r--r--drivers/usb/host/ohci-pci.c2
-rw-r--r--drivers/usb/host/pci-quirks.c45
-rw-r--r--drivers/usb/host/pci-quirks.h2
-rw-r--r--drivers/usb/host/xhci-pci.c2
-rw-r--r--drivers/usb/host/xhci.h3
-rw-r--r--drivers/usb/misc/usb251xb.c15
-rw-r--r--drivers/usb/storage/scsiglue.c11
11 files changed, 57 insertions, 39 deletions
diff --git a/Documentation/devicetree/bindings/usb/usb251xb.txt b/Documentation/devicetree/bindings/usb/usb251xb.txt
index bc7945e9dbfe..17915f64b8ee 100644
--- a/Documentation/devicetree/bindings/usb/usb251xb.txt
+++ b/Documentation/devicetree/bindings/usb/usb251xb.txt
@@ -64,10 +64,8 @@ Optional properties :
- power-on-time-ms : Specifies the time it takes from the time the host
initiates the power-on sequence to a port until the port has adequate
power. The value is given in ms in a 0 - 510 range (default is 100ms).
- - swap-dx-lanes : Specifies the downstream ports which will swap the
- differential-pair (D+/D-), default is not-swapped.
- - swap-us-lanes : Selects the upstream port differential-pair (D+/D-)
- swapping (boolean, default is not-swapped)
+ - swap-dx-lanes : Specifies the ports which will swap the differential-pair
+ (D+/D-), default is not-swapped.
Examples:
usb2512b@2c {
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 88533938ce19..9320787ac2e6 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -3052,8 +3052,8 @@ int usb_hcd_setup_local_mem(struct usb_hcd *hcd, phys_addr_t phys_addr,
local_mem = devm_memremap(hcd->self.sysdev, phys_addr,
size, MEMREMAP_WC);
- if (!local_mem)
- return -ENOMEM;
+ if (IS_ERR(local_mem))
+ return PTR_ERR(local_mem);
/*
* Here we pass a dma_addr_t but the arg type is a phys_addr_t.
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index fe9422d3bcdc..b0882c13a1d1 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -149,7 +149,7 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
break;
case PCI_VENDOR_ID_AMD:
/* AMD PLL quirk */
- if (usb_amd_find_chipset_info())
+ if (usb_amd_quirk_pll_check())
ehci->amd_pll_fix = 1;
/* AMD8111 EHCI doesn't work, according to AMD errata */
if (pdev->device == 0x7463) {
@@ -186,7 +186,7 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
break;
case PCI_VENDOR_ID_ATI:
/* AMD PLL quirk */
- if (usb_amd_find_chipset_info())
+ if (usb_amd_quirk_pll_check())
ehci->amd_pll_fix = 1;
/*
diff --git a/drivers/usb/host/hwa-hc.c b/drivers/usb/host/hwa-hc.c
index 09a8ebd95588..6968b9f2b76b 100644
--- a/drivers/usb/host/hwa-hc.c
+++ b/drivers/usb/host/hwa-hc.c
@@ -159,7 +159,7 @@ out:
return result;
error_set_cluster_id:
- wusb_cluster_id_put(wusbhc->cluster_id);
+ wusb_cluster_id_put(addr);
error_cluster_id_get:
goto out;
diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c
index a033f7d855e0..f4e13a3fddee 100644
--- a/drivers/usb/host/ohci-pci.c
+++ b/drivers/usb/host/ohci-pci.c
@@ -152,7 +152,7 @@ static int ohci_quirk_amd700(struct usb_hcd *hcd)
{
struct ohci_hcd *ohci = hcd_to_ohci(hcd);
- if (usb_amd_find_chipset_info())
+ if (usb_amd_quirk_pll_check())
ohci->flags |= OHCI_QUIRK_AMD_PLL;
/* SB800 needs pre-fetch fix */
diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index 3ce71cbfbb58..f6d04491df60 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -132,7 +132,7 @@ static struct amd_chipset_info {
struct amd_chipset_type sb_type;
int isoc_reqs;
int probe_count;
- int probe_result;
+ bool need_pll_quirk;
} amd_chipset;
static DEFINE_SPINLOCK(amd_lock);
@@ -201,11 +201,11 @@ void sb800_prefetch(struct device *dev, int on)
}
EXPORT_SYMBOL_GPL(sb800_prefetch);
-int usb_amd_find_chipset_info(void)
+static void usb_amd_find_chipset_info(void)
{
unsigned long flags;
struct amd_chipset_info info;
- int ret;
+ info.need_pll_quirk = 0;
spin_lock_irqsave(&amd_lock, flags);
@@ -213,27 +213,34 @@ int usb_amd_find_chipset_info(void)
if (amd_chipset.probe_count > 0) {
amd_chipset.probe_count++;
spin_unlock_irqrestore(&amd_lock, flags);
- return amd_chipset.probe_result;
+ return;
}
memset(&info, 0, sizeof(info));
spin_unlock_irqrestore(&amd_lock, flags);
if (!amd_chipset_sb_type_init(&info)) {
- ret = 0;
goto commit;
}
- /* Below chipset generations needn't enable AMD PLL quirk */
- if (info.sb_type.gen == AMD_CHIPSET_UNKNOWN ||
- info.sb_type.gen == AMD_CHIPSET_SB600 ||
- info.sb_type.gen == AMD_CHIPSET_YANGTZE ||
- (info.sb_type.gen == AMD_CHIPSET_SB700 &&
- info.sb_type.rev > 0x3b)) {
+ switch (info.sb_type.gen) {
+ case AMD_CHIPSET_SB700:
+ info.need_pll_quirk = info.sb_type.rev <= 0x3B;
+ break;
+ case AMD_CHIPSET_SB800:
+ case AMD_CHIPSET_HUDSON2:
+ case AMD_CHIPSET_BOLTON:
+ info.need_pll_quirk = 1;
+ break;
+ default:
+ info.need_pll_quirk = 0;
+ break;
+ }
+
+ if (!info.need_pll_quirk) {
if (info.smbus_dev) {
pci_dev_put(info.smbus_dev);
info.smbus_dev = NULL;
}
- ret = 0;
goto commit;
}
@@ -252,7 +259,6 @@ int usb_amd_find_chipset_info(void)
}
}
- ret = info.probe_result = 1;
printk(KERN_DEBUG "QUIRK: Enable AMD PLL fix\n");
commit:
@@ -263,7 +269,6 @@ commit:
/* Mark that we where here */
amd_chipset.probe_count++;
- ret = amd_chipset.probe_result;
spin_unlock_irqrestore(&amd_lock, flags);
@@ -276,10 +281,7 @@ commit:
amd_chipset = info;
spin_unlock_irqrestore(&amd_lock, flags);
}
-
- return ret;
}
-EXPORT_SYMBOL_GPL(usb_amd_find_chipset_info);
int usb_hcd_amd_remote_wakeup_quirk(struct pci_dev *pdev)
{
@@ -315,6 +317,13 @@ bool usb_amd_prefetch_quirk(void)
}
EXPORT_SYMBOL_GPL(usb_amd_prefetch_quirk);
+bool usb_amd_quirk_pll_check(void)
+{
+ usb_amd_find_chipset_info();
+ return amd_chipset.need_pll_quirk;
+}
+EXPORT_SYMBOL_GPL(usb_amd_quirk_pll_check);
+
/*
* The hardware normally enables the A-link power management feature, which
* lets the system lower the power consumption in idle states.
@@ -520,7 +529,7 @@ void usb_amd_dev_put(void)
amd_chipset.nb_type = 0;
memset(&amd_chipset.sb_type, 0, sizeof(amd_chipset.sb_type));
amd_chipset.isoc_reqs = 0;
- amd_chipset.probe_result = 0;
+ amd_chipset.need_pll_quirk = 0;
spin_unlock_irqrestore(&amd_lock, flags);
diff --git a/drivers/usb/host/pci-quirks.h b/drivers/usb/host/pci-quirks.h
index 63c633077d9e..e729de21fad7 100644
--- a/drivers/usb/host/pci-quirks.h
+++ b/drivers/usb/host/pci-quirks.h
@@ -5,11 +5,11 @@
#ifdef CONFIG_USB_PCI
void uhci_reset_hc(struct pci_dev *pdev, unsigned long base);
int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base);
-int usb_amd_find_chipset_info(void);
int usb_hcd_amd_remote_wakeup_quirk(struct pci_dev *pdev);
bool usb_amd_hang_symptom_quirk(void);
bool usb_amd_prefetch_quirk(void);
void usb_amd_dev_put(void);
+bool usb_amd_quirk_pll_check(void);
void usb_amd_quirk_pll_disable(void);
void usb_amd_quirk_pll_enable(void);
void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev);
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index c2fe218e051f..1e0236e90687 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -130,7 +130,7 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
xhci->quirks |= XHCI_AMD_0x96_HOST;
/* AMD PLL quirk */
- if (pdev->vendor == PCI_VENDOR_ID_AMD && usb_amd_find_chipset_info())
+ if (pdev->vendor == PCI_VENDOR_ID_AMD && usb_amd_quirk_pll_check())
xhci->quirks |= XHCI_AMD_PLL_FIX;
if (pdev->vendor == PCI_VENDOR_ID_AMD &&
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 7a264962a1a9..f5c41448d067 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -2175,7 +2175,8 @@ static inline bool xhci_urb_suitable_for_idt(struct urb *urb)
if (!usb_endpoint_xfer_isoc(&urb->ep->desc) && usb_urb_dir_out(urb) &&
usb_endpoint_maxp(&urb->ep->desc) >= TRB_IDT_MAX_SIZE &&
urb->transfer_buffer_length <= TRB_IDT_MAX_SIZE &&
- !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP))
+ !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP) &&
+ !urb->num_sgs)
return true;
return false;
diff --git a/drivers/usb/misc/usb251xb.c b/drivers/usb/misc/usb251xb.c
index 4d6ae3795a88..6ca9111d150a 100644
--- a/drivers/usb/misc/usb251xb.c
+++ b/drivers/usb/misc/usb251xb.c
@@ -375,7 +375,8 @@ out_err:
#ifdef CONFIG_OF
static void usb251xb_get_ports_field(struct usb251xb *hub,
- const char *prop_name, u8 port_cnt, u8 *fld)
+ const char *prop_name, u8 port_cnt,
+ bool ds_only, u8 *fld)
{
struct device *dev = hub->dev;
struct property *prop;
@@ -383,7 +384,7 @@ static void usb251xb_get_ports_field(struct usb251xb *hub,
u32 port;
of_property_for_each_u32(dev->of_node, prop_name, prop, p, port) {
- if ((port >= 1) && (port <= port_cnt))
+ if ((port >= ds_only ? 1 : 0) && (port <= port_cnt))
*fld |= BIT(port);
else
dev_warn(dev, "port %u doesn't exist\n", port);
@@ -501,15 +502,15 @@ static int usb251xb_get_ofdata(struct usb251xb *hub,
hub->non_rem_dev = USB251XB_DEF_NON_REMOVABLE_DEVICES;
usb251xb_get_ports_field(hub, "non-removable-ports", data->port_cnt,
- &hub->non_rem_dev);
+ true, &hub->non_rem_dev);
hub->port_disable_sp = USB251XB_DEF_PORT_DISABLE_SELF;
usb251xb_get_ports_field(hub, "sp-disabled-ports", data->port_cnt,
- &hub->port_disable_sp);
+ true, &hub->port_disable_sp);
hub->port_disable_bp = USB251XB_DEF_PORT_DISABLE_BUS;
usb251xb_get_ports_field(hub, "bp-disabled-ports", data->port_cnt,
- &hub->port_disable_bp);
+ true, &hub->port_disable_bp);
hub->max_power_sp = USB251XB_DEF_MAX_POWER_SELF;
if (!of_property_read_u32(np, "sp-max-total-current-microamp",
@@ -573,9 +574,7 @@ static int usb251xb_get_ofdata(struct usb251xb *hub,
*/
hub->port_swap = USB251XB_DEF_PORT_SWAP;
usb251xb_get_ports_field(hub, "swap-dx-lanes", data->port_cnt,
- &hub->port_swap);
- if (of_get_property(np, "swap-us-lanes", NULL))
- hub->port_swap |= BIT(0);
+ false, &hub->port_swap);
/* The following parameters are currently not exposed to devicetree, but
* may be as soon as needed.
diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c
index 30790240aec6..05b80211290d 100644
--- a/drivers/usb/storage/scsiglue.c
+++ b/drivers/usb/storage/scsiglue.c
@@ -28,6 +28,8 @@
* status of a command.
*/
+#include <linux/blkdev.h>
+#include <linux/dma-mapping.h>
#include <linux/module.h>
#include <linux/mutex.h>
@@ -99,6 +101,7 @@ static int slave_alloc (struct scsi_device *sdev)
static int slave_configure(struct scsi_device *sdev)
{
struct us_data *us = host_to_us(sdev->host);
+ struct device *dev = us->pusb_dev->bus->sysdev;
/*
* Many devices have trouble transferring more than 32KB at a time,
@@ -129,6 +132,14 @@ static int slave_configure(struct scsi_device *sdev)
}
/*
+ * The max_hw_sectors should be up to maximum size of a mapping for
+ * the device. Otherwise, a DMA API might fail on swiotlb environment.
+ */
+ blk_queue_max_hw_sectors(sdev->request_queue,
+ min_t(size_t, queue_max_hw_sectors(sdev->request_queue),
+ dma_max_mapping_size(dev) >> SECTOR_SHIFT));
+
+ /*
* Some USB host controllers can't do DMA; they have to use PIO.
* They indicate this by setting their dma_mask to NULL. For
* such controllers we need to make sure the block layer sets
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.