aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/ABI/testing/sysfs-driver-hid-wiimote39
-rw-r--r--drivers/hid/Kconfig63
-rw-r--r--drivers/hid/Makefile9
-rw-r--r--drivers/hid/hid-core.c12
-rw-r--r--drivers/hid/hid-elo.c273
-rw-r--r--drivers/hid/hid-holtek-mouse.c77
-rw-r--r--drivers/hid/hid-huion.c177
-rw-r--r--drivers/hid/hid-hyperv.c4
-rw-r--r--drivers/hid/hid-ids.h22
-rw-r--r--drivers/hid/hid-input.c11
-rw-r--r--drivers/hid/hid-kye.c21
-rw-r--r--drivers/hid/hid-multitouch.c34
-rw-r--r--drivers/hid/hid-ps3remote.c204
-rw-r--r--drivers/hid/hid-roccat.c16
-rw-r--r--drivers/hid/hid-sony.c473
-rw-r--r--drivers/hid/hid-wacom.c14
-rw-r--r--drivers/hid/hid-wiimote-core.c1658
-rw-r--r--drivers/hid/hid-wiimote-debug.c14
-rw-r--r--drivers/hid/hid-wiimote-ext.c849
-rw-r--r--drivers/hid/hid-wiimote-modules.c2086
-rw-r--r--drivers/hid/hid-wiimote.h217
-rw-r--r--drivers/hid/i2c-hid/i2c-hid.c20
-rw-r--r--include/uapi/linux/input.h17
-rw-r--r--net/bluetooth/hidp/core.c56
-rw-r--r--net/bluetooth/hidp/hidp.h2
25 files changed, 4640 insertions, 1728 deletions
diff --git a/Documentation/ABI/testing/sysfs-driver-hid-wiimote b/Documentation/ABI/testing/sysfs-driver-hid-wiimote
index 3d98009f447a..ed5dd567d397 100644
--- a/Documentation/ABI/testing/sysfs-driver-hid-wiimote
+++ b/Documentation/ABI/testing/sysfs-driver-hid-wiimote
@@ -12,7 +12,7 @@ Description: Make it possible to set/get current led state. Reading from it
What: /sys/bus/hid/drivers/wiimote/<dev>/extension
Date: August 2011
KernelVersion: 3.2
-Contact: David Herrmann <dh.herrmann@googlemail.com>
+Contact: David Herrmann <dh.herrmann@gmail.com>
Description: This file contains the currently connected and initialized
extensions. It can be one of: none, motionp, nunchuck, classic,
motionp+nunchuck, motionp+classic
@@ -20,3 +20,40 @@ Description: This file contains the currently connected and initialized
the official Nintendo Nunchuck extension and classic is the
Nintendo Classic Controller extension. The motionp extension can
be combined with the other two.
+ Starting with kernel-version 3.11 Motion Plus hotplugging is
+ supported and if detected, it's no longer reported as static
+ extension. You will get uevent notifications for the motion-plus
+ device then.
+
+What: /sys/bus/hid/drivers/wiimote/<dev>/devtype
+Date: May 2013
+KernelVersion: 3.11
+Contact: David Herrmann <dh.herrmann@gmail.com>
+Description: While a device is initialized by the wiimote driver, we perform
+ a device detection and signal a "change" uevent after it is
+ done. This file shows the detected device type. "pending" means
+ that the detection is still ongoing, "unknown" means, that the
+ device couldn't be detected or loaded. "generic" means, that the
+ device couldn't be detected but supports basic Wii Remote
+ features and can be used.
+ Other strings for each device-type are available and may be
+ added if new device-specific detections are added.
+ Currently supported are:
+ gen10: First Wii Remote generation
+ gen20: Second Wii Remote Plus generation (builtin MP)
+ balanceboard: Wii Balance Board
+
+What: /sys/bus/hid/drivers/wiimote/<dev>/bboard_calib
+Date: May 2013
+KernelVersion: 3.11
+Contact: David Herrmann <dh.herrmann@gmail.com>
+Description: This attribute is only provided if the device was detected as a
+ balance board. It provides a single line with 3 calibration
+ values for all 4 sensors. The values are separated by colons and
+ are each 2 bytes long (encoded as 4 digit hexadecimal value).
+ First, 0kg values for all 4 sensors are written, followed by the
+ 17kg values for all 4 sensors and last the 34kg values for all 4
+ sensors.
+ Calibration data is already applied by the kernel to all input
+ values but may be used by user-space to perform other
+ transformations.
diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
index fb52f3f6de80..14ef6ab69790 100644
--- a/drivers/hid/Kconfig
+++ b/drivers/hid/Kconfig
@@ -217,6 +217,13 @@ config HID_ELECOM
---help---
Support for the ELECOM BM084 (bluetooth mouse).
+config HID_ELO
+ tristate "ELO USB 4000/4500 touchscreen"
+ depends on USB_HID
+ ---help---
+ Support for the ELO USB 4000/4500 touchscreens. Note that this is for
+ different devices than those handled by CONFIG_TOUCHSCREEN_USB_ELO.
+
config HID_EZKEY
tristate "Ezkey BTC 8193 keyboard" if EXPERT
depends on HID
@@ -231,6 +238,9 @@ config HID_HOLTEK
Support for Holtek based devices:
- Holtek On Line Grip based game controller
- Trust GXT 18 Gaming Keyboard
+ - Sharkoon Drakonia / Perixx MX-2000 gaming mice
+ - Tracer Sniper TRM-503 / NOVA Gaming Slider X200 /
+ Zalman ZM-GM1
config HOLTEK_FF
bool "Holtek On Line Grip force feedback support"
@@ -240,6 +250,12 @@ config HOLTEK_FF
Say Y here if you have a Holtek On Line Grip based game controller
and want to have force feedback support for it.
+config HID_HUION
+ tristate "Huion tablets"
+ depends on USB_HID
+ ---help---
+ Support for Huion 580 tablet.
+
config HID_KEYTOUCH
tristate "Keytouch HID devices"
depends on HID
@@ -561,15 +577,6 @@ config HID_PRIMAX
Support for Primax devices that are not fully compliant with the
HID standard.
-config HID_PS3REMOTE
- tristate "Sony PS3 BD Remote Control"
- depends on HID
- ---help---
- Support for the Sony PS3 Blue-ray Disk Remote Control and Logitech
- Harmony Adapter for PS3, which connect over Bluetooth.
-
- Support for the 6-axis controllers is provided by HID_SONY.
-
config HID_ROCCAT
tristate "Roccat device support"
depends on USB_HID
@@ -594,12 +601,17 @@ config HID_SAMSUNG
Support for Samsung InfraRed remote control or keyboards.
config HID_SONY
- tristate "Sony PS3 controller"
+ tristate "Sony PS2/3 accessories"
depends on USB_HID
+ depends on NEW_LEDS
+ depends on LEDS_CLASS
---help---
- Support for Sony PS3 6-axis controllers.
+ Support for
- Support for the Sony PS3 BD Remote is provided by HID_PS3REMOTE.
+ * Sony PS3 6-axis controllers
+ * Buzz controllers
+ * Sony PS3 Blue-ray Disk Remote Control (Bluetooth)
+ * Logitech Harmony adapter for Sony Playstation 3 (Bluetooth)
config HID_SPEEDLINK
tristate "Speedlink VAD Cezanne mouse support"
@@ -707,22 +719,29 @@ config HID_WACOM
Support for Wacom Graphire Bluetooth and Intuos4 WL tablets.
config HID_WIIMOTE
- tristate "Nintendo Wii Remote support"
+ tristate "Nintendo Wii / Wii U peripherals"
depends on HID
depends on LEDS_CLASS
select POWER_SUPPLY
select INPUT_FF_MEMLESS
---help---
- Support for the Nintendo Wii Remote bluetooth device.
+ Support for Nintendo Wii and Wii U Bluetooth peripherals. Supported
+ devices are the Wii Remote and its extension devices, but also devices
+ based on the Wii Remote like the Wii U Pro Controller or the
+ Wii Balance Board.
-config HID_WIIMOTE_EXT
- bool "Nintendo Wii Remote Extension support"
- depends on HID_WIIMOTE
- default HID_WIIMOTE
- ---help---
- Support for extension controllers of the Nintendo Wii Remote. Say yes
- here if you want to use the Nintendo Motion+, Nunchuck or Classic
- extension controllers with your Wii Remote.
+ Support for all official Nintendo extensions is available, however, 3rd
+ party extensions might not be supported. Please report these devices to:
+ http://github.com/dvdhrm/xwiimote/issues
+
+ Other Nintendo Wii U peripherals that are IEEE 802.11 based (including
+ the Wii U Gamepad) might be supported in the future. But currently
+ support is limited to Bluetooth based devices.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called hid-wiimote.
config HID_ZEROPLUS
tristate "Zeroplus based game controller support"
diff --git a/drivers/hid/Makefile b/drivers/hid/Makefile
index 2065694f57ab..6f687287e212 100644
--- a/drivers/hid/Makefile
+++ b/drivers/hid/Makefile
@@ -28,10 +28,7 @@ ifdef CONFIG_LOGIWHEELS_FF
hid-logitech-y += hid-lg4ff.o
endif
-hid-wiimote-y := hid-wiimote-core.o
-ifdef CONFIG_HID_WIIMOTE_EXT
- hid-wiimote-y += hid-wiimote-ext.o
-endif
+hid-wiimote-y := hid-wiimote-core.o hid-wiimote-modules.o
ifdef CONFIG_DEBUG_FS
hid-wiimote-y += hid-wiimote-debug.o
endif
@@ -48,10 +45,13 @@ obj-$(CONFIG_HID_CYPRESS) += hid-cypress.o
obj-$(CONFIG_HID_DRAGONRISE) += hid-dr.o
obj-$(CONFIG_HID_EMS_FF) += hid-emsff.o
obj-$(CONFIG_HID_ELECOM) += hid-elecom.o
+obj-$(CONFIG_HID_ELO) += hid-elo.o
obj-$(CONFIG_HID_EZKEY) += hid-ezkey.o
obj-$(CONFIG_HID_GYRATION) += hid-gyration.o
obj-$(CONFIG_HID_HOLTEK) += hid-holtek-kbd.o
+obj-$(CONFIG_HID_HOLTEK) += hid-holtek-mouse.o
obj-$(CONFIG_HID_HOLTEK) += hid-holtekff.o
+obj-$(CONFIG_HID_HUION) += hid-huion.o
obj-$(CONFIG_HID_HYPERV_MOUSE) += hid-hyperv.o
obj-$(CONFIG_HID_ICADE) += hid-icade.o
obj-$(CONFIG_HID_KENSINGTON) += hid-kensington.o
@@ -92,7 +92,6 @@ hid-picolcd-y += hid-picolcd_debugfs.o
endif
obj-$(CONFIG_HID_PRIMAX) += hid-primax.o
-obj-$(CONFIG_HID_PS3REMOTE) += hid-ps3remote.o
obj-$(CONFIG_HID_ROCCAT) += hid-roccat.o hid-roccat-common.o \
hid-roccat-arvo.o hid-roccat-isku.o hid-roccat-kone.o \
hid-roccat-koneplus.o hid-roccat-konepure.o hid-roccat-kovaplus.o \
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index 264f55099940..e39dac68063c 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -1293,7 +1293,7 @@ int hid_input_report(struct hid_device *hid, int type, u8 *data, int size, int i
if (hdrv && hdrv->raw_event && hid_match_report(hid, report)) {
ret = hdrv->raw_event(hid, report, data, size);
- if (ret != 0) {
+ if (ret < 0) {
ret = ret < 0 ? ret : 0;
goto unlock;
}
@@ -1573,6 +1573,8 @@ static const struct hid_device_id hid_have_special_driver[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_DRAGONRISE, 0x0006) },
{ HID_USB_DEVICE(USB_VENDOR_ID_DRAGONRISE, 0x0011) },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_ELECOM, USB_DEVICE_ID_ELECOM_BM084) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_ELO, 0x0009) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_ELO, 0x0030) },
{ HID_USB_DEVICE(USB_VENDOR_ID_EMS, USB_DEVICE_ID_EMS_TRIO_LINKER_PLUS_II) },
{ HID_USB_DEVICE(USB_VENDOR_ID_EZKEY, USB_DEVICE_ID_BTC_8193) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GAMERON, USB_DEVICE_ID_GAMERON_DUAL_PSX_ADAPTOR) },
@@ -1584,10 +1586,14 @@ static const struct hid_device_id hid_have_special_driver[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_GYRATION, USB_DEVICE_ID_GYRATION_REMOTE_3) },
{ HID_USB_DEVICE(USB_VENDOR_ID_HOLTEK, USB_DEVICE_ID_HOLTEK_ON_LINE_GRIP) },
{ HID_USB_DEVICE(USB_VENDOR_ID_HOLTEK_ALT, USB_DEVICE_ID_HOLTEK_ALT_KEYBOARD) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_HOLTEK_ALT, USB_DEVICE_ID_HOLTEK_ALT_MOUSE_A04A) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_HOLTEK_ALT, USB_DEVICE_ID_HOLTEK_ALT_MOUSE_A067) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_HUION, USB_DEVICE_ID_HUION_580) },
{ HID_USB_DEVICE(USB_VENDOR_ID_JESS2, USB_DEVICE_ID_JESS2_COLOR_RUMBLE_PAD) },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_ION, USB_DEVICE_ID_ICADE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_KENSINGTON, USB_DEVICE_ID_KS_SLIMBLADE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_KEYTOUCH, USB_DEVICE_ID_KEYTOUCH_IEC) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_GENIUS_GILA_GAMING_MOUSE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_ERGO_525V) },
{ HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_EASYPEN_I405X) },
{ HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_MOUSEPEN_I608X) },
@@ -1680,6 +1686,8 @@ static const struct hid_device_id hid_have_special_driver[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_SAMSUNG, USB_DEVICE_ID_SAMSUNG_IR_REMOTE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_SAMSUNG, USB_DEVICE_ID_SAMSUNG_WIRELESS_KBD_MOUSE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_SKYCABLE, USB_DEVICE_ID_SKYCABLE_WIRELESS_PRESENTER) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_BUZZ_CONTROLLER) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_WIRELESS_BUZZ_CONTROLLER) },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_BDREMOTE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER) },
{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_NAVIGATION_CONTROLLER) },
@@ -2042,6 +2050,8 @@ static const struct hid_device_id hid_ignore_list[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_1006) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_1007) },
{ HID_USB_DEVICE(USB_VENDOR_ID_IMATION, USB_DEVICE_ID_DISC_STAKKA) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_JABRA, USB_DEVICE_ID_JABRA_SPEAK_410) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_JABRA, USB_DEVICE_ID_JABRA_SPEAK_510) },
{ HID_USB_DEVICE(USB_VENDOR_ID_KBGEAR, USB_DEVICE_ID_KBGEAR_JAMSTUDIO) },
{ HID_USB_DEVICE(USB_VENDOR_ID_KWORLD, USB_DEVICE_ID_KWORLD_RADIO_FM700) },
{ HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_GPEN_560) },
diff --git a/drivers/hid/hid-elo.c b/drivers/hid/hid-elo.c
new file mode 100644
index 000000000000..f042a6cf8b18
--- /dev/null
+++ b/drivers/hid/hid-elo.c
@@ -0,0 +1,273 @@
+/*
+ * HID driver for ELO usb touchscreen 4000/4500
+ *
+ * Copyright (c) 2013 Jiri Slaby
+ *
+ * Data parsing taken from elousb driver by Vojtech Pavlik.
+ *
+ * This driver is licensed under the terms of GPLv2.
+ */
+
+#include <linux/hid.h>
+#include <linux/input.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/workqueue.h>
+
+#include "hid-ids.h"
+
+#define ELO_PERIODIC_READ_INTERVAL HZ
+#define ELO_SMARTSET_CMD_TIMEOUT 2000 /* msec */
+
+/* Elo SmartSet commands */
+#define ELO_FLUSH_SMARTSET_RESPONSES 0x02 /* Flush all pending smartset responses */
+#define ELO_SEND_SMARTSET_COMMAND 0x05 /* Send a smartset command */
+#define ELO_GET_SMARTSET_RESPONSE 0x06 /* Get a smartset response */
+#define ELO_DIAG 0x64 /* Diagnostics command */
+#define ELO_SMARTSET_PACKET_SIZE 8
+
+struct elo_priv {
+ struct usb_device *usbdev;
+ struct delayed_work work;
+ unsigned char buffer[ELO_SMARTSET_PACKET_SIZE];
+};
+
+static struct workqueue_struct *wq;
+static bool use_fw_quirk = true;
+module_param(use_fw_quirk, bool, S_IRUGO);
+MODULE_PARM_DESC(use_fw_quirk, "Do periodic pokes for broken M firmwares (default = true)");
+
+static void elo_input_configured(struct hid_device *hdev,
+ struct hid_input *hidinput)
+{
+ struct input_dev *input = hidinput->input;
+
+ set_bit(BTN_TOUCH, input->keybit);
+ set_bit(ABS_PRESSURE, input->absbit);
+ input_set_abs_params(input, ABS_PRESSURE, 0, 256, 0, 0);
+}
+
+static void elo_process_data(struct input_dev *input, const u8 *data, int size)
+{
+ int press;
+
+ input_report_abs(input, ABS_X, (data[3] << 8) | data[2]);
+ input_report_abs(input, ABS_Y, (data[5] << 8) | data[4]);
+
+ press = 0;
+ if (data[1] & 0x80)
+ press = (data[7] << 8) | data[6];
+ input_report_abs(input, ABS_PRESSURE, press);
+
+ if (data[1] & 0x03) {
+ input_report_key(input, BTN_TOUCH, 1);
+ input_sync(input);
+ }
+
+ if (data[1] & 0x04)
+ input_report_key(input, BTN_TOUCH, 0);
+
+ input_sync(input);
+}
+
+static int elo_raw_event(struct hid_device *hdev, struct hid_report *report,
+ u8 *data, int size)
+{
+ struct hid_input *hidinput;
+
+ if (!(hdev->claimed & HID_CLAIMED_INPUT) || list_empty(&hdev->inputs))
+ return 0;
+
+ hidinput = list_first_entry(&hdev->inputs, struct hid_input, list);
+
+ switch (report->id) {
+ case 0:
+ if (data[0] == 'T') { /* Mandatory ELO packet marker */
+ elo_process_data(hidinput->input, data, size);
+ return 1;
+ }
+ break;
+ default: /* unknown report */
+ /* Unknown report type; pass upstream */
+ hid_info(hdev, "unknown report type %d\n", report->id);
+ break;
+ }
+
+ return 0;
+}
+
+static int elo_smartset_send_get(struct usb_device *dev, u8 command,
+ void *data)
+{
+ unsigned int pipe;
+ u8 dir;
+
+ if (command == ELO_SEND_SMARTSET_COMMAND) {
+ pipe = usb_sndctrlpipe(dev, 0);
+ dir = USB_DIR_OUT;
+ } else if (command == ELO_GET_SMARTSET_RESPONSE) {
+ pipe = usb_rcvctrlpipe(dev, 0);
+ dir = USB_DIR_IN;
+ } else
+ return -EINVAL;
+
+ return usb_control_msg(dev, pipe, command,
+ dir | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ 0, 0, data, ELO_SMARTSET_PACKET_SIZE,
+ ELO_SMARTSET_CMD_TIMEOUT);
+}
+
+static int elo_flush_smartset_responses(struct usb_device *dev)
+{
+ return usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+ ELO_FLUSH_SMARTSET_RESPONSES,
+ USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ 0, 0, NULL, 0, USB_CTRL_SET_TIMEOUT);
+}
+
+static void elo_work(struct work_struct *work)
+{
+ struct elo_priv *priv = container_of(work, struct elo_priv, work.work);
+ struct usb_device *dev = priv->usbdev;
+ unsigned char *buffer = priv->buffer;
+ int ret;
+
+ ret = elo_flush_smartset_responses(dev);
+ if (ret < 0) {
+ dev_err(&dev->dev, "initial FLUSH_SMARTSET_RESPONSES failed, error %d\n",
+ ret);
+ goto fail;
+ }
+
+ /* send Diagnostics command */
+ *buffer = ELO_DIAG;
+ ret = elo_smartset_send_get(dev, ELO_SEND_SMARTSET_COMMAND, buffer);
+ if (ret < 0) {
+ dev_err(&dev->dev, "send Diagnostics Command failed, error %d\n",
+ ret);
+ goto fail;
+ }
+
+ /* get the result */
+ ret = elo_smartset_send_get(dev, ELO_GET_SMARTSET_RESPONSE, buffer);
+ if (ret < 0) {
+ dev_err(&dev->dev, "get Diagnostics Command response failed, error %d\n",
+ ret);
+ goto fail;
+ }
+
+ /* read the ack */
+ if (*buffer != 'A') {
+ ret = elo_smartset_send_get(dev, ELO_GET_SMARTSET_RESPONSE,
+ buffer);
+ if (ret < 0) {
+ dev_err(&dev->dev, "get acknowledge response failed, error %d\n",
+ ret);
+ goto fail;
+ }
+ }
+
+fail:
+ ret = elo_flush_smartset_responses(dev);
+ if (ret < 0)
+ dev_err(&dev->dev, "final FLUSH_SMARTSET_RESPONSES failed, error %d\n",
+ ret);
+ queue_delayed_work(wq, &priv->work, ELO_PERIODIC_READ_INTERVAL);
+}
+
+/*
+ * Not all Elo devices need the periodic HID descriptor reads.
+ * Only firmware version M needs this.
+ */
+static bool elo_broken_firmware(struct usb_device *dev)
+{
+ return use_fw_quirk && le16_to_cpu(dev->descriptor.bcdDevice) == 0x10d;
+}
+
+static int elo_probe(struct hid_device *hdev, const struct hid_device_id *id)
+{
+ struct elo_priv *priv;
+ int ret;
+
+ priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ INIT_DELAYED_WORK(&priv->work, elo_work);
+ priv->usbdev = interface_to_usbdev(to_usb_interface(hdev->dev.parent));
+
+ hid_set_drvdata(hdev, priv);
+
+ ret = hid_parse(hdev);
+ if (ret) {
+ hid_err(hdev, "parse failed\n");
+ goto err_free;
+ }
+
+ ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
+ if (ret) {
+ hid_err(hdev, "hw start failed\n");
+ goto err_free;
+ }
+
+ if (elo_broken_firmware(priv->usbdev)) {
+ hid_info(hdev, "broken firmware found, installing workaround\n");
+ queue_delayed_work(wq, &priv->work, ELO_PERIODIC_READ_INTERVAL);
+ }
+
+ return 0;
+err_free:
+ kfree(priv);
+ return ret;
+}
+
+static void elo_remove(struct hid_device *hdev)
+{
+ struct elo_priv *priv = hid_get_drvdata(hdev);
+
+ hid_hw_stop(hdev);
+ flush_workqueue(wq);
+ kfree(priv);
+}
+
+static const struct hid_device_id elo_devices[] = {
+ { HID_USB_DEVICE(USB_VENDOR_ID_ELO, 0x0009), },
+ { HID_USB_DEVICE(USB_VENDOR_ID_ELO, 0x0030), },
+ { }
+};
+MODULE_DEVICE_TABLE(hid, elo_devices);
+
+static struct hid_driver elo_driver = {
+ .name = "elo",
+ .id_table = elo_devices,
+ .probe = elo_probe,
+ .remove = elo_remove,
+ .raw_event = elo_raw_event,
+ .input_configured = elo_input_configured,
+};
+
+static int __init elo_driver_init(void)
+{
+ int ret;
+
+ wq = create_singlethread_workqueue("elousb");
+ if (!wq)
+ return -ENOMEM;
+
+ ret = hid_register_driver(&elo_driver);
+ if (ret)
+ destroy_workqueue(wq);
+
+ return ret;
+}
+module_init(elo_driver_init);
+
+static void __exit elo_driver_exit(void)
+{
+ hid_unregister_driver(&elo_driver);
+ destroy_workqueue(wq);
+}
+module_exit(elo_driver_exit);
+
+MODULE_AUTHOR("Jiri Slaby <jslaby@suse.cz>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/hid/hid-holtek-mouse.c b/drivers/hid/hid-holtek-mouse.c
new file mode 100644
index 000000000000..7e6db3cf46f9
--- /dev/null
+++ b/drivers/hid/hid-holtek-mouse.c
@@ -0,0 +1,77 @@
+/*
+ * HID driver for Holtek gaming mice
+ * Copyright (c) 2013 Christian Ohm
+ * Heavily inspired by various other HID drivers that adjust the report
+ * descriptor.
+*/
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#include <linux/hid.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+
+#include "hid-ids.h"
+
+/*
+ * The report descriptor of some Holtek based gaming mice specifies an
+ * excessively large number of consumer usages (2^15), which is more than
+ * HID_MAX_USAGES. This prevents proper parsing of the report descriptor.
+ *
+ * This driver fixes the report descriptor for:
+ * - USB ID 04d9:a067, sold as Sharkoon Drakonia and Perixx MX-2000
+ * - USB ID 04d9:a04a, sold as Tracer Sniper TRM-503, NOVA Gaming Slider X200
+ * and Zalman ZM-GM1
+ */
+
+static __u8 *holtek_mouse_report_fixup(struct hid_device *hdev, __u8 *rdesc,
+ unsigned int *rsize)
+{
+ struct usb_interface *intf = to_usb_interface(hdev->dev.parent);
+
+ if (intf->cur_altsetting->desc.bInterfaceNumber == 1) {
+ /* Change usage maximum and logical maximum from 0x7fff to
+ * 0x2fff, so they don't exceed HID_MAX_USAGES */
+ switch (hdev->product) {
+ case USB_DEVICE_ID_HOLTEK_ALT_MOUSE_A067:
+ if (*rsize >= 122 && rdesc[115] == 0xff && rdesc[116] == 0x7f
+ && rdesc[120] == 0xff && rdesc[121] == 0x7f) {
+ hid_info(hdev, "Fixing up report descriptor\n");
+ rdesc[116] = rdesc[121] = 0x2f;
+ }
+ break;
+ case USB_DEVICE_ID_HOLTEK_ALT_MOUSE_A04A:
+ if (*rsize >= 113 && rdesc[106] == 0xff && rdesc[107] == 0x7f
+ && rdesc[111] == 0xff && rdesc[112] == 0x7f) {
+ hid_info(hdev, "Fixing up report descriptor\n");
+ rdesc[107] = rdesc[112] = 0x2f;
+ }
+ break;
+ }
+
+ }
+ return rdesc;
+}
+
+static const struct hid_device_id holtek_mouse_devices[] = {
+ { HID_USB_DEVICE(USB_VENDOR_ID_HOLTEK_ALT,
+ USB_DEVICE_ID_HOLTEK_ALT_MOUSE_A067) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_HOLTEK_ALT,
+ USB_DEVICE_ID_HOLTEK_ALT_MOUSE_A04A) },
+ { }
+};
+MODULE_DEVICE_TABLE(hid, holtek_mouse_devices);
+
+static struct hid_driver holtek_mouse_driver = {
+ .name = "holtek_mouse",
+ .id_table = holtek_mouse_devices,
+ .report_fixup = holtek_mouse_report_fixup,
+};
+
+module_hid_driver(holtek_mouse_driver);
+MODULE_LICENSE("GPL");
diff --git a/drivers/hid/hid-huion.c b/drivers/hid/hid-huion.c
new file mode 100644
index 000000000000..cbf4da4689ba
--- /dev/null
+++ b/drivers/hid/hid-huion.c
@@ -0,0 +1,177 @@
+/*
+ * HID driver for Huion devices not fully compliant with HID standard
+ *
+ * Copyright (c) 2013 Martin Rusko
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#include <linux/device.h>
+#include <linux/hid.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include "usbhid/usbhid.h"
+
+#include "hid-ids.h"
+
+/* Original Huion 580 report descriptor size */
+#define HUION_580_RDESC_ORIG_SIZE 177
+
+/* Fixed Huion 580 report descriptor */
+static __u8 huion_580_rdesc_fixed[] = {
+ 0x05, 0x0D, /* Usage Page (Digitizer), */
+ 0x09, 0x02, /* Usage (Pen), */
+ 0xA1, 0x01, /* Collection (Application), */
+ 0x85, 0x07, /* Report ID (7), */
+ 0x09, 0x20, /* Usage (Stylus), */
+ 0xA0, /* Collection (Physical), */
+ 0x14, /* Logical Minimum (0), */
+ 0x25, 0x01, /* Logical Maximum (1), */
+ 0x75, 0x01, /* Report Size (1), */
+ 0x09, 0x42, /* Usage (Tip Switch), */
+ 0x09, 0x44, /* Usage (Barrel Switch), */
+ 0x09, 0x46, /* Usage (Tablet Pick), */
+ 0x95, 0x03, /* Report Count (3), */
+ 0x81, 0x02, /* Input (Variable), */
+ 0x95, 0x03, /* Report Count (3), */
+ 0x81, 0x03, /* Input (Constant, Variable), */
+ 0x09, 0x32, /* Usage (In Range), */
+ 0x95, 0x01, /* Report Count (1), */
+ 0x81, 0x02, /* Input (Variable), */
+ 0x95, 0x01, /* Report Count (1), */
+ 0x81, 0x03, /* Input (Constant, Variable), */
+ 0x75, 0x10, /* Report Size (16), */
+ 0x95, 0x01, /* Report Count (1), */
+ 0xA4, /* Push, */
+ 0x05, 0x01, /* Usage Page (Desktop), */
+ 0x65, 0x13, /* Unit (Inch), */
+ 0x55, 0xFD, /* Unit Exponent (-3), */
+ 0x34, /* Physical Minimum (0), */
+ 0x09, 0x30, /* Usage (X), */
+ 0x46, 0x40, 0x1F, /* Physical Maximum (8000), */
+ 0x26, 0x00, 0x7D, /* Logical Maximum (32000), */
+ 0x81, 0x02, /* Input (Variable), */
+ 0x09, 0x31, /* Usage (Y), */
+ 0x46, 0x88, 0x13, /* Physical Maximum (5000), */
+ 0x26, 0x20, 0x4E, /* Logical Maximum (20000), */
+ 0x81, 0x02, /* Input (Variable), */
+ 0xB4, /* Pop, */
+ 0x09, 0x30, /* Usage (Tip Pressure), */
+ 0x26, 0xFF, 0x07, /* Logical Maximum (2047), */
+ 0x81, 0x02, /* Input (Variable), */
+ 0xC0, /* End Collection, */
+ 0xC0 /* End Collection */
+};
+
+static __u8 *huion_report_fixup(struct hid_device *hdev, __u8 *rdesc,
+ unsigned int *rsize)
+{
+ switch (hdev->product) {
+ case USB_DEVICE_ID_HUION_580:
+ if (*rsize == HUION_580_RDESC_ORIG_SIZE) {
+ rdesc = huion_580_rdesc_fixed;
+ *rsize = sizeof(huion_580_rdesc_fixed);
+ }
+ break;
+ }
+ return rdesc;
+}
+
+/**
+ * Enable fully-functional tablet mode by reading special string
+ * descriptor.
+ *
+ * @hdev: HID device
+ *
+ * The specific string descriptor and data were discovered by sniffing
+ * the Windows driver traffic.
+ */
+static int huion_tablet_enable(struct hid_device *hdev)
+{
+ int rc;
+ char buf[22];
+
+ rc = usb_string(hid_to_usb_dev(hdev), 0x64, buf, sizeof(buf));
+ if (rc < 0)
+ return rc;
+
+ return 0;
+}
+
+static int huion_probe(struct hid_device *hdev, const struct hid_device_id *id)
+{
+ int ret;
+ struct usb_interface *intf = to_usb_interface(hdev->dev.parent);
+
+ /* Ignore interfaces 1 (mouse) and 2 (keyboard) for Huion 580 tablet,
+ * as they are not used
+ */
+ switch (id->product) {
+ case USB_DEVICE_ID_HUION_580:
+ if (intf->cur_altsetting->desc.bInterfaceNumber != 0x00)
+ return -ENODEV;
+ break;
+ }
+
+ ret = hid_parse(hdev);
+ if (ret) {
+ hid_err(hdev, "parse failed\n");
+ goto err;
+ }
+
+ ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
+ if (ret) {
+ hid_err(hdev, "hw start failed\n");
+ goto err;
+ }
+
+ switch (id->product) {
+ case USB_DEVICE_ID_HUION_580:
+ ret = huion_tablet_enable(hdev);
+ if (ret) {
+ hid_err(hdev, "tablet enabling failed\n");
+ goto enabling_err;
+ }
+ break;
+ }
+
+ return 0;
+enabling_err:
+ hid_hw_stop(hdev);
+err:
+ return ret;
+}
+
+static int huion_raw_event(struct hid_device *hdev, struct hid_report *report,
+ u8 *data, int size)
+{
+ /* If this is a pen input report then invert the in-range bit */
+ if (report->type == HID_INPUT_REPORT && report->id == 0x07 && size >= 2)
+ data[1] ^= 0x40;
+
+ return 0;
+}
+
+static const struct hid_device_id huion_devices[] = {
+ { HID_USB_DEVICE(USB_VENDOR_ID_HUION, USB_DEVICE_ID_HUION_580) },
+ { }
+};
+MODULE_DEVICE_TABLE(hid, huion_devices);
+
+static struct hid_driver huion_driver = {
+ .name = "huion",
+ .id_table = huion_devices,
+ .probe = huion_probe,
+ .report_fixup = huion_report_fixup,
+ .raw_event = huion_raw_event,
+};
+module_hid_driver(huion_driver);
+
+MODULE_AUTHOR("Martin Rusko");
+MODULE_DESCRIPTION("Huion HID driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/hid/hid-hyperv.c b/drivers/hid/hid-hyperv.c
index aa3fec0d9dc6..713217380b44 100644
--- a/drivers/hid/hid-hyperv.c
+++ b/drivers/hid/hid-hyperv.c
@@ -199,13 +199,11 @@ static void mousevsc_on_receive_device_info(struct mousevsc_dev *input_device,
if (desc->bLength == 0)
goto cleanup;
- input_device->hid_desc = kzalloc(desc->bLength, GFP_ATOMIC);
+ input_device->hid_desc = kmemdup(desc, desc->bLength, GFP_ATOMIC);
if (!input_device->hid_desc)
goto cleanup;
- memcpy(input_device->hid_desc, desc, desc->bLength);
-
input_device->report_desc_size = desc->desc[0].wDescriptorLength;
if (input_device->report_desc_size == 0) {
input_device->dev_info_status = -EINVAL;
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 38535c9243d5..c5aea29f164f 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -248,6 +248,9 @@
#define USB_DEVICE_ID_CYPRESS_BARCODE_4 0xed81
#define USB_DEVICE_ID_CYPRESS_TRUETOUCH 0xc001
+#define USB_VENDOR_ID_DATA_MODUL 0x7374
+#define USB_VENDOR_ID_DATA_MODUL_EASYMAXTOUCH 0x1201
+
#define USB_VENDOR_ID_DEALEXTREAME 0x10c5
#define USB_DEVICE_ID_DEALEXTREAME_RADIO_SI4701 0x819a
@@ -272,16 +275,15 @@
#define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_725E 0x725e
#define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_7262 0x7262
#define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_726B 0x726b
-#define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_72AA 0x72aa
#define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_72A1 0x72a1
+#define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_72AA 0x72aa
+#define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_72C4 0x72c4
+#define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_72D0 0x72d0
#define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_72FA 0x72fa
#define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_7302 0x7302
#define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_7349 0x7349
#define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_73F7 0x73f7
#define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_A001 0xa001
-#define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_7224 0x7224
-#define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_72D0 0x72d0
-#define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_72C4 0x72c4
#define USB_VENDOR_ID_ELECOM 0x056e
#define USB_DEVICE_ID_ELECOM_BM084 0x0061
@@ -425,6 +427,9 @@
#define USB_DEVICE_ID_UGCI_FLYING 0x0020
#define USB_DEVICE_ID_UGCI_FIGHTING 0x0030
+#define USB_VENDOR_ID_HUION 0x256c
+#define USB_DEVICE_ID_HUION_580 0x006e
+
#define USB_VENDOR_ID_IDEACOM 0x1cb6
#define USB_DEVICE_ID_IDEACOM_IDC6650 0x6650
#define USB_DEVICE_ID_IDEACOM_IDC6651 0x6651
@@ -440,6 +445,8 @@
#define USB_VENDOR_ID_HOLTEK_ALT 0x04d9
#define USB_DEVICE_ID_HOLTEK_ALT_KEYBOARD 0xa055
+#define USB_DEVICE_ID_HOLTEK_ALT_MOUSE_A067 0xa067
+#define USB_DEVICE_ID_HOLTEK_ALT_MOUSE_A04A 0xa04a
#define USB_VENDOR_ID_IMATION 0x0718
#define USB_DEVICE_ID_DISC_STAKKA 0xd000
@@ -447,6 +454,10 @@
#define USB_VENDOR_ID_IRTOUCHSYSTEMS 0x6615
#define USB_DEVICE_ID_IRTOUCH_INFRARED_USB 0x0070
+#define USB_VENDOR_ID_JABRA 0x0b0e
+#define USB_DEVICE_ID_JABRA_SPEAK_410 0x0412
+#define USB_DEVICE_ID_JABRA_SPEAK_510 0x0420
+
#define USB_VENDOR_ID_JESS 0x0c45
#define USB_DEVICE_ID_JESS_YUREX 0x1010
@@ -467,6 +478,7 @@
#define USB_VENDOR_ID_KYE 0x0458
#define USB_DEVICE_ID_KYE_ERGO_525V 0x0087
+#define USB_DEVICE_ID_GENIUS_GILA_GAMING_MOUSE 0x0138
#define USB_DEVICE_ID_KYE_GPEN_560 0x5003
#define USB_DEVICE_ID_KYE_EASYPEN_I405X 0x5010
#define USB_DEVICE_ID_KYE_MOUSEPEN_I608X 0x5011
@@ -734,6 +746,8 @@
#define USB_DEVICE_ID_SONY_PS3_BDREMOTE 0x0306
#define USB_DEVICE_ID_SONY_PS3_CONTROLLER 0x0268
#define USB_DEVICE_ID_SONY_NAVIGATION_CONTROLLER 0x042f
+#define USB_DEVICE_ID_SONY_BUZZ_CONTROLLER 0x0002
+#define USB_DEVICE_ID_SONY_WIRELESS_BUZZ_CONTROLLER 0x1000
#define USB_VENDOR_ID_SOUNDGRAPH 0x15c2
#define USB_DEVICE_ID_SOUNDGRAPH_IMON_FIRST 0x0034
diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c
index 945b8158ec4c..7480799e535c 100644
--- a/drivers/hid/hid-input.c
+++ b/drivers/hid/hid-input.c
@@ -354,10 +354,10 @@ static int hidinput_get_battery_property(struct power_supply *psy,
dev->battery_report_type);
if (ret != 2) {
- if (ret >= 0)
- ret = -EINVAL;
+ ret = -ENODATA;
break;
}
+ ret = 0;
if (dev->battery_min < dev->battery_max &&
buf[1] >= dev->battery_min &&
@@ -1042,9 +1042,14 @@ void hidinput_hid_event(struct hid_device *hid, struct hid_field *field, struct
/*
* Ignore out-of-range values as per HID specification,
- * section 5.10 and 6.2.25
+ * section 5.10 and 6.2.25.
+ *
+ * The logical_minimum < logical_maximum check is done so that we
+ * don't unintentionally discard values sent by devices which
+ * don't specify logical min and max.
*/
if ((field->flags & HID_MAIN_ITEM_VARIABLE) &&
+ (field->logical_minimum < field->logical_maximum) &&
(value < field->logical_minimum ||
value > field->logical_maximum)) {
dbg_hid("Ignoring out-of-range value %x\n", value);
diff --git a/drivers/hid/hid-kye.c b/drivers/hid/hid-kye.c
index 6af90dbdc3d4..1e2ee2aa84a0 100644
--- a/drivers/hid/hid-kye.c
+++ b/drivers/hid/hid-kye.c
@@ -314,6 +314,25 @@ static __u8 *kye_report_fixup(struct hid_device *hdev, __u8 *rdesc,
*rsize = sizeof(easypen_m610x_rdesc_fixed);
}
break;
+ case USB_DEVICE_ID_GENIUS_GILA_GAMING_MOUSE:
+ /*
+ * the fixup that need to be done:
+ * - change Usage Maximum in the Comsumer Control
+ * (report ID 3) to a reasonable value
+ */
+ if (*rsize >= 135 &&
+ /* Usage Page (Consumer Devices) */
+ rdesc[104] == 0x05 && rdesc[105] == 0x0c &&
+ /* Usage (Consumer Control) */
+ rdesc[106] == 0x09 && rdesc[107] == 0x01 &&
+ /* Usage Maximum > 12287 */
+ rdesc[114] == 0x2a && rdesc[116] > 0x2f) {
+ hid_info(hdev,
+ "fixing up Genius Gila Gaming Mouse "
+ "report descriptor\n");
+ rdesc[116] = 0x2f;
+ }
+ break;
}
return rdesc;
}
@@ -407,6 +426,8 @@ static const struct hid_device_id kye_devices[] = {
USB_DEVICE_ID_KYE_MOUSEPEN_I608X) },
{ HID_USB_DEVICE(USB_VENDOR_ID_KYE,
USB_DEVICE_ID_KYE_EASYPEN_M610X) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_KYE,
+ USB_DEVICE_ID_GENIUS_GILA_GAMING_MOUSE) },
{ }
};
MODULE_DEVICE_TABLE(hid, kye_devices);
diff --git a/drivers/hid/hid-multitouch.c b/drivers/hid/hid-multitouch.c
index d39a5cede0b0..cb0e361d7a4b 100644
--- a/drivers/hid/hid-multitouch.c
+++ b/drivers/hid/hid-multitouch.c
@@ -1111,6 +1111,11 @@ static const struct hid_device_id mt_devices[] = {
HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS,
USB_DEVICE_ID_CYPRESS_TRUETOUCH) },
+ /* Data Modul easyMaxTouch */
+ { .driver_data = MT_CLS_DEFAULT,
+ MT_USB_DEVICE(USB_VENDOR_ID_DATA_MODUL,
+ USB_VENDOR_ID_DATA_MODUL_EASYMAXTOUCH) },
+
/* eGalax devices (resistive) */
{ .driver_data = MT_CLS_EGALAX,
MT_USB_DEVICE(USB_VENDOR_ID_DWAV,
@@ -1120,34 +1125,40 @@ static const struct hid_device_id mt_devices[] = {
USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_480E) },
/* eGalax devices (capacitive) */
- { .driver_data = MT_CLS_EGALAX,
- MT_USB_DEVICE(USB_VENDOR_ID_DWAV,
- USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_720C) },
{ .driver_data = MT_CLS_EGALAX_SERIAL,
MT_USB_DEVICE(USB_VENDOR_ID_DWAV,
USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_7207) },
- { .driver_data = MT_CLS_EGALAX_SERIAL,
+ { .driver_data = MT_CLS_EGALAX,
MT_USB_DEVICE(USB_VENDOR_ID_DWAV,
- USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_725E) },
+ USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_720C) },
{ .driver_data = MT_CLS_EGALAX_SERIAL,
MT_USB_DEVICE(USB_VENDOR_ID_DWAV,
USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_7224) },
{ .driver_data = MT_CLS_EGALAX_SERIAL,
MT_USB_DEVICE(USB_VENDOR_ID_DWAV,
USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_722A) },
- { .driver_data = MT_CLS_EGALAX,
+ { .driver_data = MT_CLS_EGALAX_SERIAL,
MT_USB_DEVICE(USB_VENDOR_ID_DWAV,
- USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_726B) },
+ USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_725E) },
{ .driver_data = MT_CLS_EGALAX_SERIAL,
MT_USB_DEVICE(USB_VENDOR_ID_DWAV,
USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_7262) },
{ .driver_data = MT_CLS_EGALAX,
MT_USB_DEVICE(USB_VENDOR_ID_DWAV,
+ USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_726B) },
+ { .driver_data = MT_CLS_EGALAX,
+ MT_USB_DEVICE(USB_VENDOR_ID_DWAV,
USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_72A1) },
{ .driver_data = MT_CLS_EGALAX_SERIAL,
MT_USB_DEVICE(USB_VENDOR_ID_DWAV,
USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_72AA) },
{ .driver_data = MT_CLS_EGALAX,
+ HID_USB_DEVICE(USB_VENDOR_ID_DWAV,
+ USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_72C4) },
+ { .driver_data = MT_CLS_EGALAX,
+ HID_USB_DEVICE(USB_VENDOR_ID_DWAV,
+ USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_72D0) },
+ { .driver_data = MT_CLS_EGALAX,
MT_USB_DEVICE(USB_VENDOR_ID_DWAV,
USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_72FA) },
{ .driver_data = MT_CLS_EGALAX,
@@ -1162,15 +1173,6 @@ static const struct hid_device_id mt_devices[] = {
{ .driver_data = MT_CLS_EGALAX_SERIAL,
MT_USB_DEVICE(USB_VENDOR_ID_DWAV,
USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_A001) },
- { .driver_data = MT_CLS_EGALAX,
- HID_USB_DEVICE(USB_VENDOR_ID_DWAV,
- USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_7224) },
- { .driver_data = MT_CLS_EGALAX,
- HID_USB_DEVICE(USB_VENDOR_ID_DWAV,
- USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_72D0) },
- { .driver_data = MT_CLS_EGALAX,
- HID_USB_DEVICE(USB_VENDOR_ID_DWAV,
- USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_72C4) },
/* Elo TouchSystems IntelliTouch Plus panel */
{ .driver_data = MT_CLS_DUAL_CONTACT_ID,
diff --git a/drivers/hid/hid-ps3remote.c b/drivers/hid/hid-ps3remote.c
deleted file mode 100644
index f1239d3c5b14..000000000000
--- a/drivers/hid/hid-ps3remote.c
+++ /dev/null
@@ -1,204 +0,0 @@
-/*
- * HID driver for Sony PS3 BD Remote Control
- *
- * Copyright (c) 2012 David Dillow <dave@thedillows.org>
- * Based on a blend of the bluez fakehid user-space code by Marcel Holtmann
- * and other kernel HID drivers.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the Free
- * Software Foundation; either version 2 of the License, or (at your option)
- * any later version.
- */
-
-/* NOTE: in order for the Sony PS3 BD Remote Control to be found by
- * a Bluetooth host, the key combination Start+Enter has to be kept pressed
- * for about 7 seconds with the Bluetooth Host Controller in discovering mode.
- *
- * There will be no PIN request from the device.
- */
-
-#include <linux/device.h>
-#include <linux/hid.h>
-#include <linux/module.h>
-
-#include "hid-ids.h"
-
-static __u8 ps3remote_rdesc[] = {
- 0x05, 0x01, /* GUsagePage Generic Desktop */
- 0x09, 0x05, /* LUsage 0x05 [Game Pad] */
- 0xA1, 0x01, /* MCollection Application (mouse, keyboard) */
-
- /* Use collection 1 for joypad buttons */
- 0xA1, 0x02, /* MCollection Logical (interrelated data) */
-
- /* Ignore the 1st byte, maybe it is used for a controller
- * number but it's not needed for correct operation */
- 0x75, 0x08, /* GReportSize 0x08 [8] */
- 0x95, 0x01, /* GReportCount 0x01 [1] */
- 0x81, 0x01, /* MInput 0x01 (Const[0] Arr[1] Abs[2]) */
-
- /* Bytes from 2nd to 4th are a bitmap for joypad buttons, for these
- * buttons multiple keypresses are allowed */
- 0x05, 0x09, /* GUsagePage Button */
- 0x19, 0x01, /* LUsageMinimum 0x01 [Button 1 (primary/trigger)] */
- 0x29, 0x18, /* LUsageMaximum 0x18 [Button 24] */
- 0x14, /* GLogicalMinimum [0] */
- 0x25, 0x01, /* GLogicalMaximum 0x01 [1] */
- 0x75, 0x01, /* GReportSize 0x01 [1] */
- 0x95, 0x18, /* GReportCount 0x18 [24] */
- 0x81, 0x02, /* MInput 0x02 (Data[0] Var[1] Abs[2]) */
-
- 0xC0, /* MEndCollection */
-
- /* Use collection 2 for remote control buttons */
- 0xA1, 0x02, /* MCollection Logical (interrelated data) */
-
- /* 5th byte is used for remote control buttons */
- 0x05, 0x09, /* GUsagePage Button */
- 0x18, /* LUsageMinimum [No button pressed] */
- 0x29, 0xFE, /* LUsageMaximum 0xFE [Button 254] */
- 0x14, /* GLogicalMinimum [0] */
- 0x26, 0xFE, 0x00, /* GLogicalMaximum 0x00FE [254] */
- 0x75, 0x08, /* GReportSize 0x08 [8] */
- 0x95, 0x01, /* GReportCount 0x01 [1] */
- 0x80, /* MInput */
-
- /* Ignore bytes from 6th to 11th, 6th to 10th are always constant at
- * 0xff and 11th is for press indication */
- 0x75, 0x08, /* GReportSize 0x08 [8] */
- 0x95, 0x06, /* GReportCount 0x06 [6] */
- 0x81, 0x01, /* MInput 0x01 (Const[0] Arr[1] Abs[2]) */
-
- /* 12th byte is for battery strength */
- 0x05, 0x06, /* GUsagePage Generic Device Controls */
- 0x09, 0x20, /* LUsage 0x20 [Battery Strength] */
- 0x14, /* GLogicalMinimum [0] */
- 0x25, 0x05, /* GLogicalMaximum 0x05 [5] */
- 0x75, 0x08, /* GReportSize 0x08 [8] */
- 0x95, 0x01, /* GReportCount 0x01 [1] */
- 0x81, 0x02, /* MInput 0x02 (Data[0] Var[1] Abs[2]) */
-
- 0xC0, /* MEndCollection */
-
- 0xC0 /* MEndCollection [Game Pad] */
-};
-
-static const unsigned int ps3remote_keymap_joypad_buttons[] = {
- [0x01] = KEY_SELECT,
- [0x02] = BTN_THUMBL, /* L3 */
- [0x03] = BTN_THUMBR, /* R3 */
- [0x04] = BTN_START,
- [0x05] = KEY_UP,
- [0x06] = KEY_RIGHT,
- [0x07] = KEY_DOWN,
- [0x08] = KEY_LEFT,
- [0x09] = BTN_TL2, /* L2 */
- [0x0a] = BTN_TR2, /* R2 */
- [0x0b] = BTN_TL, /* L1 */
- [0x0c] = BTN_TR, /* R1 */
- [0x0d] = KEY_OPTION, /* options/triangle */
- [0x0e] = KEY_BACK, /* back/circle */
- [0x0f] = BTN_0, /* cross */
- [0x10] = KEY_SCREEN, /* view/square */
- [0x11] = KEY_HOMEPAGE, /* PS button */
- [0x14] = KEY_ENTER,
-};
-static const unsigned int ps3remote_keymap_remote_buttons[] = {
- [0x00] = KEY_1,
- [0x01] = KEY_2,
- [0x02] = KEY_3,
- [0x03] = KEY_4,
- [0x04] = KEY_5,
- [0x05] = KEY_6,
- [0x06] = KEY_7,
- [0x07] = KEY_8,
- [0x08] = KEY_9,
- [0x09] = KEY_0,
- [0x0e] = KEY_ESC, /* return */
- [0x0f] = KEY_CLEAR,
- [0x16] = KEY_EJECTCD,
- [0x1a] = KEY_MENU, /* top menu */
- [0x28] = KEY_TIME,
- [0x30] = KEY_PREVIOUS,
- [0x31] = KEY_NEXT,
- [0x32] = KEY_PLAY,
- [0x33] = KEY_REWIND, /* scan back */
- [0x34] = KEY_FORWARD, /* scan forward */
- [0x38] = KEY_STOP,
- [0x39] = KEY_PAUSE,
- [0x40] = KEY_CONTEXT_MENU, /* pop up/menu */
- [0x60] = KEY_FRAMEBACK, /* slow/step back */
- [0x61] = KEY_FRAMEFORWARD, /* slow/step forward */
- [0x63] = KEY_SUBTITLE,
- [0x64] = KEY_AUDIO,
- [0x65] = KEY_ANGLE,
- [0x70] = KEY_INFO, /* display */
- [0x80] = KEY_BLUE,
- [0x81] = KEY_RED,
- [0x82] = KEY_GREEN,
- [0x83] = KEY_YELLOW,
-};
-
-static __u8 *ps3remote_fixup(struct hid_device *hdev, __u8 *rdesc,
- unsigned int *rsize)
-{
- *rsize = sizeof(ps3remote_rdesc);
- return ps3remote_rdesc;
-}
-
-static int ps3remote_mapping(struct hid_device *hdev, struct hid_input *hi,
- struct hid_field *field, struct hid_usage *usage,
- unsigned long **bit, int *max)
-{
- unsigned int key = usage->hid & HID_USAGE;
-
- if ((usage->hid & HID_USAGE_PAGE) != HID_UP_BUTTON)
- return -1;
-
- switch (usage->collection_index) {
- case 1:
- if (key >= ARRAY_SIZE(ps3remote_keymap_joypad_buttons))
- return -1;
-
- key = ps3remote_keymap_joypad_buttons[key];
- if (!key)
- return -1;
- break;
- case 2:
- if (key >= ARRAY_SIZE(ps3remote_keymap_remote_buttons))
- return -1;
-
- key = ps3remote_keymap_remote_buttons[key];
- if (!key)
- return -1;
- break;
- default:
- return -1;
- }
-
- hid_map_usage_clear(hi, usage, bit, max, EV_KEY, key);
- return 1;
-}
-
-static const struct hid_device_id ps3remote_devices[] = {
- /* PS3 BD Remote Control */
- { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_BDREMOTE) },
- /* Logitech Harmony Adapter for PS3 */
- { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_HARMONY_PS3) },
- { }
-};
-MODULE_DEVICE_TABLE(hid, ps3remote_devices);
-
-static struct hid_driver ps3remote_driver = {
- .name = "ps3_remote",
- .id_table = ps3remote_devices,
- .report_fixup = ps3remote_fixup,
- .input_mapping = ps3remote_mapping,
-};
-module_hid_driver(ps3remote_driver);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("David Dillow <dave@thedillows.org>, Antonio Ospite <ospite@studenti.unina.it>");
diff --git a/drivers/hid/hid-roccat.c b/drivers/hid/hid-roccat.c
index b59b3df9ca95..65c4ccfcbd29 100644
--- a/drivers/hid/hid-roccat.c
+++ b/drivers/hid/hid-roccat.c
@@ -366,7 +366,7 @@ void roccat_disconnect(int minor)
mutex_lock(&devices_lock);
devices[minor] = NULL;
mutex_unlock(&devices_lock);
-
+
if (device->open) {
hid_hw_close(device->hid);
wake_up_interruptible(&device->wait);
@@ -426,13 +426,23 @@ static int __init roccat_init(void)
if (retval < 0) {
pr_warn("can't get major number\n");
- return retval;
+ goto error;
}
cdev_init(&roccat_cdev, &roccat_ops);
- cdev_add(&roccat_cdev, dev_id, ROCCAT_MAX_DEVICES);
+ retval = cdev_add(&roccat_cdev, dev_id, ROCCAT_MAX_DEVICES);
+ if (retval < 0) {
+ pr_warn("cannot add cdev\n");
+ goto cleanup_alloc_chrdev_region;
+ }
return 0;
+
+
+ cleanup_alloc_chrdev_region:
+ unregister_chrdev_region(dev_id, ROCCAT_MAX_DEVICES);
+ error:
+ return retval;
}
static void __exit roccat_exit(void)
diff --git a/drivers/hid/hid-sony.c b/drivers/hid/hid-sony.c
index 312098e4af4f..ecbc74923d06 100644
--- a/drivers/hid/hid-sony.c
+++ b/drivers/hid/hid-sony.c
@@ -1,11 +1,13 @@
/*
- * HID driver for some sony "special" devices
+ * HID driver for Sony / PS2 / PS3 BD devices.
*
* Copyright (c) 1999 Andreas Gal
* Copyright (c) 2000-2005 Vojtech Pavlik <vojtech@suse.cz>
* Copyright (c) 2005 Michael Haboustak <mike-@cinci.rr.com> for Concept2, Inc
* Copyright (c) 2008 Jiri Slaby
- * Copyright (c) 2006-2008 Jiri Kosina
+ * Copyright (c) 2012 David Dillow <dave@thedillows.org>
+ * Copyright (c) 2006-2013 Jiri Kosina
+ * Copyright (c) 2013 Colin Leitner <colin.leitner@gmail.com>
*/
/*
@@ -15,17 +17,27 @@
* any later version.
*/
+/* NOTE: in order for the Sony PS3 BD Remote Control to be found by
+ * a Bluetooth host, the key combination Start+Enter has to be kept pressed
+ * for about 7 seconds with the Bluetooth Host Controller in discovering mode.
+ *
+ * There will be no PIN request from the device.
+ */
+
#include <linux/device.h>
#include <linux/hid.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/usb.h>
+#include <linux/leds.h>
#include "hid-ids.h"
#define VAIO_RDESC_CONSTANT (1 << 0)
#define SIXAXIS_CONTROLLER_USB (1 << 1)
#define SIXAXIS_CONTROLLER_BT (1 << 2)
+#define BUZZ_CONTROLLER (1 << 3)
+#define PS3REMOTE (1 << 4)
static const u8 sixaxis_rdesc_fixup[] = {
0x95, 0x13, 0x09, 0x01, 0x81, 0x02, 0x95, 0x0C,
@@ -55,10 +67,214 @@ static const u8 sixaxis_rdesc_fixup2[] = {
0xb1, 0x02, 0xc0, 0xc0,
};
+static __u8 ps3remote_rdesc[] = {
+ 0x05, 0x01, /* GUsagePage Generic Desktop */
+ 0x09, 0x05, /* LUsage 0x05 [Game Pad] */
+ 0xA1, 0x01, /* MCollection Application (mouse, keyboard) */
+
+ /* Use collection 1 for joypad buttons */
+ 0xA1, 0x02, /* MCollection Logical (interrelated data) */
+
+ /* Ignore the 1st byte, maybe it is used for a controller
+ * number but it's not needed for correct operation */
+ 0x75, 0x08, /* GReportSize 0x08 [8] */
+ 0x95, 0x01, /* GReportCount 0x01 [1] */
+ 0x81, 0x01, /* MInput 0x01 (Const[0] Arr[1] Abs[2]) */
+
+ /* Bytes from 2nd to 4th are a bitmap for joypad buttons, for these
+ * buttons multiple keypresses are allowed */
+ 0x05, 0x09, /* GUsagePage Button */
+ 0x19, 0x01, /* LUsageMinimum 0x01 [Button 1 (primary/trigger)] */
+ 0x29, 0x18, /* LUsageMaximum 0x18 [Button 24] */
+ 0x14, /* GLogicalMinimum [0] */
+ 0x25, 0x01, /* GLogicalMaximum 0x01 [1] */
+ 0x75, 0x01, /* GReportSize 0x01 [1] */
+ 0x95, 0x18, /* GReportCount 0x18 [24] */
+ 0x81, 0x02, /* MInput 0x02 (Data[0] Var[1] Abs[2]) */
+
+ 0xC0, /* MEndCollection */
+
+ /* Use collection 2 for remote control buttons */
+ 0xA1, 0x02, /* MCollection Logical (interrelated data) */
+
+ /* 5th byte is used for remote control buttons */
+ 0x05, 0x09, /* GUsagePage Button */
+ 0x18, /* LUsageMinimum [No button pressed] */
+ 0x29, 0xFE, /* LUsageMaximum 0xFE [Button 254] */
+ 0x14, /* GLogicalMinimum [0] */
+ 0x26, 0xFE, 0x00, /* GLogicalMaximum 0x00FE [254] */
+ 0x75, 0x08, /* GReportSize 0x08 [8] */
+ 0x95, 0x01, /* GReportCount 0x01 [1] */
+ 0x80, /* MInput */
+
+ /* Ignore bytes from 6th to 11th, 6th to 10th are always constant at
+ * 0xff and 11th is for press indication */
+ 0x75, 0x08, /* GReportSize 0x08 [8] */
+ 0x95, 0x06, /* GReportCount 0x06 [6] */
+ 0x81, 0x01, /* MInput 0x01 (Const[0] Arr[1] Abs[2]) */
+
+ /* 12th byte is for battery strength */
+ 0x05, 0x06, /* GUsagePage Generic Device Controls */
+ 0x09, 0x20, /* LUsage 0x20 [Battery Strength] */
+ 0x14, /* GLogicalMinimum [0] */
+ 0x25, 0x05, /* GLogicalMaximum 0x05 [5] */
+ 0x75, 0x08, /* GReportSize 0x08 [8] */
+ 0x95, 0x01, /* GReportCount 0x01 [1] */
+ 0x81, 0x02, /* MInput 0x02 (Data[0] Var[1] Abs[2]) */
+
+ 0xC0, /* MEndCollection */
+
+ 0xC0 /* MEndCollection [Game Pad] */
+};
+
+static const unsigned int ps3remote_keymap_joypad_buttons[] = {
+ [0x01] = KEY_SELECT,
+ [0x02] = BTN_THUMBL, /* L3 */
+ [0x03] = BTN_THUMBR, /* R3 */
+ [0x04] = BTN_START,
+ [0x05] = KEY_UP,
+ [0x06] = KEY_RIGHT,
+ [0x07] = KEY_DOWN,
+ [0x08] = KEY_LEFT,
+ [0x09] = BTN_TL2, /* L2 */
+ [0x0a] = BTN_TR2, /* R2 */
+ [0x0b] = BTN_TL, /* L1 */
+ [0x0c] = BTN_TR, /* R1 */
+ [0x0d] = KEY_OPTION, /* options/triangle */
+ [0x0e] = KEY_BACK, /* back/circle */
+ [0x0f] = BTN_0, /* cross */
+ [0x10] = KEY_SCREEN, /* view/square */
+ [0x11] = KEY_HOMEPAGE, /* PS button */
+ [0x14] = KEY_ENTER,
+};
+static const unsigned int ps3remote_keymap_remote_buttons[] = {
+ [0x00] = KEY_1,
+ [0x01] = KEY_2,
+ [0x02] = KEY_3,
+ [0x03] = KEY_4,
+ [0x04] = KEY_5,
+ [0x05] = KEY_6,
+ [0x06] = KEY_7,
+ [0x07] = KEY_8,
+ [0x08] = KEY_9,
+ [0x09] = KEY_0,
+ [0x0e] = KEY_ESC, /* return */
+ [0x0f] = KEY_CLEAR,
+ [0x16] = KEY_EJECTCD,
+ [0x1a] = KEY_MENU, /* top menu */
+ [0x28] = KEY_TIME,
+ [0x30] = KEY_PREVIOUS,
+ [0x31] = KEY_NEXT,
+ [0x32] = KEY_PLAY,
+ [0x33] = KEY_REWIND, /* scan back */
+ [0x34] = KEY_FORWARD, /* scan forward */
+ [0x38] = KEY_STOP,
+ [0x39] = KEY_PAUSE,
+ [0x40] = KEY_CONTEXT_MENU, /* pop up/menu */
+ [0x60] = KEY_FRAMEBACK, /* slow/step back */
+ [0x61] = KEY_FRAMEFORWARD, /* slow/step forward */
+ [0x63] = KEY_SUBTITLE,
+ [0x64] = KEY_AUDIO,
+ [0x65] = KEY_ANGLE,
+ [0x70] = KEY_INFO, /* display */
+ [0x80] = KEY_BLUE,
+ [0x81] = KEY_RED,
+ [0x82] = KEY_GREEN,
+ [0x83] = KEY_YELLOW,
+};
+
+static const unsigned int buzz_keymap[] = {
+ /* The controller has 4 remote buzzers, each with one LED and 5
+ * buttons.
+ *
+ * We use the mapping chosen by the controller, which is:
+ *
+ * Key Offset
+ * -------------------
+ * Buzz 1
+ * Blue 5
+ * Orange 4
+ * Green 3
+ * Yellow 2
+ *
+ * So, for example, the orange button on the third buzzer is mapped to
+ * BTN_TRIGGER_HAPPY14
+ */
+ [ 1] = BTN_TRIGGER_HAPPY1,
+ [ 2] = BTN_TRIGGER_HAPPY2,
+ [ 3] = BTN_TRIGGER_HAPPY3,
+ [ 4] = BTN_TRIGGER_HAPPY4,
+ [ 5] = BTN_TRIGGER_HAPPY5,
+ [ 6] = BTN_TRIGGER_HAPPY6,
+ [ 7] = BTN_TRIGGER_HAPPY7,
+ [ 8] = BTN_TRIGGER_HAPPY8,
+ [ 9] = BTN_TRIGGER_HAPPY9,
+ [10] = BTN_TRIGGER_HAPPY10,
+ [11] = BTN_TRIGGER_HAPPY11,
+ [12] = BTN_TRIGGER_HAPPY12,
+ [13] = BTN_TRIGGER_HAPPY13,
+ [14] = BTN_TRIGGER_HAPPY14,
+ [15] = BTN_TRIGGER_HAPPY15,
+ [16] = BTN_TRIGGER_HAPPY16,
+ [17] = BTN_TRIGGER_HAPPY17,
+ [18] = BTN_TRIGGER_HAPPY18,
+ [19] = BTN_TRIGGER_HAPPY19,
+ [20] = BTN_TRIGGER_HAPPY20,
+};
+
struct sony_sc {
unsigned long quirks;
+
+ void *extra;
};
+struct buzz_extra {
+ int led_state;
+ struct led_classdev *leds[4];
+};
+
+static __u8 *ps3remote_fixup(struct hid_device *hdev, __u8 *rdesc,
+ unsigned int *rsize)
+{
+ *rsize = sizeof(ps3remote_rdesc);
+ return ps3remote_rdesc;
+}
+
+static int ps3remote_mapping(struct hid_device *hdev, struct hid_input *hi,
+ struct hid_field *field, struct hid_usage *usage,
+ unsigned long **bit, int *max)
+{
+ unsigned int key = usage->hid & HID_USAGE;
+
+ if ((usage->hid & HID_USAGE_PAGE) != HID_UP_BUTTON)
+ return -1;
+
+ switch (usage->collection_index) {
+ case 1:
+ if (key >= ARRAY_SIZE(ps3remote_keymap_joypad_buttons))
+ return -1;
+
+ key = ps3remote_keymap_joypad_buttons[key];
+ if (!key)
+ return -1;
+ break;
+ case 2:
+ if (key >= ARRAY_SIZE(ps3remote_keymap_remote_buttons))
+ return -1;
+
+ key = ps3remote_keymap_remote_buttons[key];
+ if (!key)
+ return -1;
+ break;
+ default:
+ return -1;
+ }
+
+ hid_map_usage_clear(hi, usage, bit, max, EV_KEY, key);
+ return 1;
+}
+
+
/* Sony Vaio VGX has wrongly mouse pointer declared as constant */
static __u8 *sony_report_fixup(struct hid_device *hdev, __u8 *rdesc,
unsigned int *rsize)
@@ -95,6 +311,10 @@ static __u8 *sony_report_fixup(struct hid_device *hdev, __u8 *rdesc,
*rsize = sizeof(sixaxis_rdesc_fixup2);
memcpy(rdesc, &sixaxis_rdesc_fixup2, *rsize);
}
+
+ if (sc->quirks & PS3REMOTE)
+ return ps3remote_fixup(hdev, rdesc, rsize);
+
return rdesc;
}
@@ -117,6 +337,41 @@ static int sony_raw_event(struct hid_device *hdev, struct hid_report *report,
return 0;
}
+static int sony_mapping(struct hid_device *hdev, struct hid_input *hi,
+ struct hid_field *field, struct hid_usage *usage,
+ unsigned long **bit, int *max)
+{
+ struct sony_sc *sc = hid_get_drvdata(hdev);
+
+ if (sc->quirks & BUZZ_CONTROLLER) {
+ unsigned int key = usage->hid & HID_USAGE;
+
+ if ((usage->hid & HID_USAGE_PAGE) != HID_UP_BUTTON)
+ return -1;
+
+ switch (usage->collection_index) {
+ case 1:
+ if (key >= ARRAY_SIZE(buzz_keymap))
+ return -1;
+
+ key = buzz_keymap[key];
+ if (!key)
+ return -1;
+ break;
+ default:
+ return -1;
+ }
+
+ hid_map_usage_clear(hi, usage, bit, max, EV_KEY, key);
+ return 1;
+ }
+
+ if (sc->quirks & PS3REMOTE)
+ return ps3remote_mapping(hdev, hi, field, usage, bit, max);
+
+ return -1;
+}
+
/*
* The Sony Sixaxis does not handle HID Output Reports on the Interrupt EP
* like it should according to usbhid/hid-core.c::usbhid_output_raw_report()
@@ -192,11 +447,181 @@ static int sixaxis_set_operational_bt(struct hid_device *hdev)
return hdev->hid_output_raw_report(hdev, buf, sizeof(buf), HID_FEATURE_REPORT);
}
+static void buzz_set_leds(struct hid_device *hdev, int leds)
+{
+ struct list_head *report_list =
+ &hdev->report_enum[HID_OUTPUT_REPORT].report_list;
+ struct hid_report *report = list_entry(report_list->next,
+ struct hid_report, list);
+ __s32 *value = report->field[0]->value;
+
+ value[0] = 0x00;
+ value[1] = (leds & 1) ? 0xff : 0x00;
+ value[2] = (leds & 2) ? 0xff : 0x00;
+ value[3] = (leds & 4) ? 0xff : 0x00;
+ value[4] = (leds & 8) ? 0xff : 0x00;
+ value[5] = 0x00;
+ value[6] = 0x00;
+ hid_hw_request(hdev, report, HID_REQ_SET_REPORT);
+}
+
+static void buzz_led_set_brightness(struct led_classdev *led,
+ enum led_brightness value)
+{
+ struct device *dev = led->dev->parent;
+ struct hid_device *hdev = container_of(dev, struct hid_device, dev);
+ struct sony_sc *drv_data;
+ struct buzz_extra *buzz;
+
+ int n;
+
+ drv_data = hid_get_drvdata(hdev);
+ if (!drv_data || !drv_data->extra) {
+ hid_err(hdev, "No device data\n");
+ return;
+ }
+ buzz = drv_data->extra;
+
+ for (n = 0; n < 4; n++) {
+ if (led == buzz->leds[n]) {
+ int on = !! (buzz->led_state & (1 << n));
+ if (value == LED_OFF && on) {
+ buzz->led_state &= ~(1 << n);
+ buzz_set_leds(hdev, buzz->led_state);
+ } else if (value != LED_OFF && !on) {
+ buzz->led_state |= (1 << n);
+ buzz_set_leds(hdev, buzz->led_state);
+ }
+ break;
+ }
+ }
+}
+
+static enum led_brightness buzz_led_get_brightness(struct led_classdev *led)
+{
+ struct device *dev = led->dev->parent;
+ struct hid_device *hdev = container_of(dev, struct hid_device, dev);
+ struct sony_sc *drv_data;
+ struct buzz_extra *buzz;
+
+ int n;
+ int on = 0;
+
+ drv_data = hid_get_drvdata(hdev);
+ if (!drv_data || !drv_data->extra) {
+ hid_err(hdev, "No device data\n");
+ return LED_OFF;
+ }
+ buzz = drv_data->extra;
+
+ for (n = 0; n < 4; n++) {
+ if (led == buzz->leds[n]) {
+ on = !! (buzz->led_state & (1 << n));
+ break;
+ }
+ }
+
+ return on ? LED_FULL : LED_OFF;
+}
+
+static int buzz_init(struct hid_device *hdev)
+{
+ struct sony_sc *drv_data;
+ struct buzz_extra *buzz;
+ int n, ret = 0;
+ struct led_classdev *led;
+ size_t name_sz;
+ char *name;
+
+ drv_data = hid_get_drvdata(hdev);
+ BUG_ON(!(drv_data->quirks & BUZZ_CONTROLLER));
+
+ buzz = kzalloc(sizeof(*buzz), GFP_KERNEL);
+ if (!buzz) {
+ hid_err(hdev, "Insufficient memory, cannot allocate driver data\n");
+ return -ENOMEM;
+ }
+ drv_data->extra = buzz;
+
+ /* Clear LEDs as we have no way of reading their initial state. This is
+ * only relevant if the driver is loaded after somebody actively set the
+ * LEDs to on */
+ buzz_set_leds(hdev, 0x00);
+
+ name_sz = strlen(dev_name(&hdev->dev)) + strlen("::buzz#") + 1;
+
+ for (n = 0; n < 4; n++) {
+ led = kzalloc(sizeof(struct led_classdev) + name_sz, GFP_KERNEL);
+ if (!led) {
+ hid_err(hdev, "Couldn't allocate memory for LED %d\n", n);
+ goto error_leds;
+ }
+
+ name = (void *)(&led[1]);
+ snprintf(name, name_sz, "%s::buzz%d", dev_name(&hdev->dev), n + 1);
+ led->name = name;
+ led->brightness = 0;
+ led->max_brightness = 1;
+ led->brightness_get = buzz_led_get_brightness;
+ led->brightness_set = buzz_led_set_brightness;
+
+ if (led_classdev_register(&hdev->dev, led)) {
+ hid_err(hdev, "Failed to register LED %d\n", n);
+ kfree(led);
+ goto error_leds;
+ }
+
+ buzz->leds[n] = led;
+ }
+
+ return ret;
+
+error_leds:
+ for (n = 0; n < 4; n++) {
+ led = buzz->leds[n];
+ buzz->leds[n] = NULL;
+ if (!led)
+ continue;
+ led_classdev_unregister(led);
+ kfree(led);
+ }
+
+ kfree(drv_data->extra);
+ drv_data->extra = NULL;
+ return ret;
+}
+
+static void buzz_remove(struct hid_device *hdev)
+{
+ struct sony_sc *drv_data;
+ struct buzz_extra *buzz;
+ struct led_classdev *led;
+ int n;
+
+ drv_data = hid_get_drvdata(hdev);
+ BUG_ON(!(drv_data->quirks & BUZZ_CONTROLLER));
+
+ buzz = drv_data->extra;
+
+ for (n = 0; n < 4; n++) {
+ led = buzz->leds[n];
+ buzz->leds[n] = NULL;
+ if (!led)
+ continue;
+ led_classdev_unregister(led);
+ kfree(led);
+ }
+
+ kfree(drv_data->extra);
+ drv_data->extra = NULL;
+}
+
static int sony_probe(struct hid_device *hdev, const struct hid_device_id *id)
{
int ret;
unsigned long quirks = id->driver_data;
struct sony_sc *sc;
+ unsigned int connect_mask = HID_CONNECT_DEFAULT;
sc = kzalloc(sizeof(*sc), GFP_KERNEL);
if (sc == NULL) {
@@ -213,8 +638,14 @@ static int sony_probe(struct hid_device *hdev, const struct hid_device_id *id)
goto err_free;
}
- ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT |
- HID_CONNECT_HIDDEV_FORCE);
+ if (sc->quirks & VAIO_RDESC_CONSTANT)
+ connect_mask |= HID_CONNECT_HIDDEV_FORCE;
+ else if (sc->quirks & SIXAXIS_CONTROLLER_USB)
+ connect_mask |= HID_CONNECT_HIDDEV_FORCE;
+ else if (sc->quirks & SIXAXIS_CONTROLLER_BT)
+ connect_mask |= HID_CONNECT_HIDDEV_FORCE;
+
+ ret = hid_hw_start(hdev, connect_mask);
if (ret) {
hid_err(hdev, "hw start failed\n");
goto err_free;
@@ -226,6 +657,8 @@ static int sony_probe(struct hid_device *hdev, const struct hid_device_id *id)
}
else if (sc->quirks & SIXAXIS_CONTROLLER_BT)
ret = sixaxis_set_operational_bt(hdev);
+ else if (sc->quirks & BUZZ_CONTROLLER)
+ ret = buzz_init(hdev);
else
ret = 0;
@@ -242,8 +675,13 @@ err_free:
static void sony_remove(struct hid_device *hdev)
{
+ struct sony_sc *sc = hid_get_drvdata(hdev);
+
+ if (sc->quirks & BUZZ_CONTROLLER)
+ buzz_remove(hdev);
+
hid_hw_stop(hdev);
- kfree(hid_get_drvdata(hdev));
+ kfree(sc);
}
static const struct hid_device_id sony_devices[] = {
@@ -257,17 +695,30 @@ static const struct hid_device_id sony_devices[] = {
.driver_data = VAIO_RDESC_CONSTANT },
{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_VAIO_VGP_MOUSE),
.driver_data = VAIO_RDESC_CONSTANT },
+ /* Wired Buzz Controller. Reported as Sony Hub from its USB ID and as
+ * Logitech joystick from the device descriptor. */
+ { HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_BUZZ_CONTROLLER),
+ .driver_data = BUZZ_CONTROLLER },
+ { HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_WIRELESS_BUZZ_CONTROLLER),
+ .driver_data = BUZZ_CONTROLLER },
+ /* PS3 BD Remote Control */
+ { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_BDREMOTE),
+ .driver_data = PS3REMOTE },
+ /* Logitech Harmony Adapter for PS3 */
+ { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_HARMONY_PS3),
+ .driver_data = PS3REMOTE },
{ }
};
MODULE_DEVICE_TABLE(hid, sony_devices);
static struct hid_driver sony_driver = {
- .name = "sony",
- .id_table = sony_devices,
- .probe = sony_probe,
- .remove = sony_remove,
- .report_fixup = sony_report_fixup,
- .raw_event = sony_raw_event
+ .name = "sony",
+ .id_table = sony_devices,
+ .input_mapping = sony_mapping,
+ .probe = sony_probe,
+ .remove = sony_remove,
+ .report_fixup = sony_report_fixup,
+ .raw_event = sony_raw_event
};
module_hid_driver(sony_driver);
diff --git a/drivers/hid/hid-wacom.c b/drivers/hid/hid-wacom.c
index a4a8bb0da688..60c75dcbbdb8 100644
--- a/drivers/hid/hid-wacom.c
+++ b/drivers/hid/hid-wacom.c
@@ -46,6 +46,7 @@ struct wacom_data {
__u8 battery_capacity;
__u8 power_raw;
__u8 ps_connected;
+ __u8 bat_charging;
struct power_supply battery;
struct power_supply ac;
__u8 led_selector;
@@ -62,6 +63,7 @@ static enum power_supply_property wacom_battery_props[] = {
POWER_SUPPLY_PROP_PRESENT,
POWER_SUPPLY_PROP_CAPACITY,
POWER_SUPPLY_PROP_SCOPE,
+ POWER_SUPPLY_PROP_STATUS,
};
static enum power_supply_property wacom_ac_props[] = {
@@ -287,6 +289,15 @@ static int wacom_battery_get_property(struct power_supply *psy,
case POWER_SUPPLY_PROP_CAPACITY:
val->intval = wdata->battery_capacity;
break;
+ case POWER_SUPPLY_PROP_STATUS:
+ if (wdata->bat_charging)
+ val->intval = POWER_SUPPLY_STATUS_CHARGING;
+ else
+ if (wdata->battery_capacity == 100 && wdata->ps_connected)
+ val->intval = POWER_SUPPLY_STATUS_FULL;
+ else
+ val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+ break;
default:
ret = -EINVAL;
break;
@@ -727,7 +738,8 @@ static int wacom_raw_event(struct hid_device *hdev, struct hid_report *report,
if (power_raw != wdata->power_raw) {
wdata->power_raw = power_raw;
wdata->battery_capacity = batcap_i4[power_raw & 0x07];
- wdata->ps_connected = power_raw & 0x08;
+ wdata->bat_charging = (power_raw & 0x08) ? 1 : 0;
+ wdata->ps_connected = (power_raw & 0x10) ? 1 : 0;
}
break;
diff --git a/drivers/hid/hid-wiimote-core.c b/drivers/hid/hid-wiimote-core.c
index e5ee1f20bbd9..0c06054cab8f 100644
--- a/drivers/hid/hid-wiimote-core.c
+++ b/drivers/hid/hid-wiimote-core.c
@@ -1,6 +1,6 @@
/*
- * HID driver for Nintendo Wiimote devices
- * Copyright (c) 2011 David Herrmann
+ * HID driver for Nintendo Wii / Wii U peripherals
+ * Copyright (c) 2011-2013 David Herrmann <dh.herrmann@gmail.com>
*/
/*
@@ -14,53 +14,19 @@
#include <linux/device.h>
#include <linux/hid.h>
#include <linux/input.h>
-#include <linux/leds.h>
#include <linux/module.h>
#include <linux/mutex.h>
-#include <linux/power_supply.h>
#include <linux/spinlock.h>
#include "hid-ids.h"
#include "hid-wiimote.h"
-enum wiiproto_keys {
- WIIPROTO_KEY_LEFT,
- WIIPROTO_KEY_RIGHT,
- WIIPROTO_KEY_UP,
- WIIPROTO_KEY_DOWN,
- WIIPROTO_KEY_PLUS,
- WIIPROTO_KEY_MINUS,
- WIIPROTO_KEY_ONE,
- WIIPROTO_KEY_TWO,
- WIIPROTO_KEY_A,
- WIIPROTO_KEY_B,
- WIIPROTO_KEY_HOME,
- WIIPROTO_KEY_COUNT
-};
-
-static __u16 wiiproto_keymap[] = {
- KEY_LEFT, /* WIIPROTO_KEY_LEFT */
- KEY_RIGHT, /* WIIPROTO_KEY_RIGHT */
- KEY_UP, /* WIIPROTO_KEY_UP */
- KEY_DOWN, /* WIIPROTO_KEY_DOWN */
- KEY_NEXT, /* WIIPROTO_KEY_PLUS */
- KEY_PREVIOUS, /* WIIPROTO_KEY_MINUS */
- BTN_1, /* WIIPROTO_KEY_ONE */
- BTN_2, /* WIIPROTO_KEY_TWO */
- BTN_A, /* WIIPROTO_KEY_A */
- BTN_B, /* WIIPROTO_KEY_B */
- BTN_MODE, /* WIIPROTO_KEY_HOME */
-};
+/* output queue handling */
-static enum power_supply_property wiimote_battery_props[] = {
- POWER_SUPPLY_PROP_CAPACITY,
- POWER_SUPPLY_PROP_SCOPE,
-};
-
-static ssize_t wiimote_hid_send(struct hid_device *hdev, __u8 *buffer,
- size_t count)
+static int wiimote_hid_send(struct hid_device *hdev, __u8 *buffer,
+ size_t count)
{
__u8 *buf;
- ssize_t ret;
+ int ret;
if (!hdev->hid_output_raw_report)
return -ENODEV;
@@ -75,24 +41,33 @@ static ssize_t wiimote_hid_send(struct hid_device *hdev, __u8 *buffer,
return ret;
}
-static void wiimote_worker(struct work_struct *work)
+static void wiimote_queue_worker(struct work_struct *work)
{
- struct wiimote_data *wdata = container_of(work, struct wiimote_data,
- worker);
+ struct wiimote_queue *queue = container_of(work, struct wiimote_queue,
+ worker);
+ struct wiimote_data *wdata = container_of(queue, struct wiimote_data,
+ queue);
unsigned long flags;
+ int ret;
- spin_lock_irqsave(&wdata->qlock, flags);
+ spin_lock_irqsave(&wdata->queue.lock, flags);
- while (wdata->head != wdata->tail) {
- spin_unlock_irqrestore(&wdata->qlock, flags);
- wiimote_hid_send(wdata->hdev, wdata->outq[wdata->tail].data,
- wdata->outq[wdata->tail].size);
- spin_lock_irqsave(&wdata->qlock, flags);
+ while (wdata->queue.head != wdata->queue.tail) {
+ spin_unlock_irqrestore(&wdata->queue.lock, flags);
+ ret = wiimote_hid_send(wdata->hdev,
+ wdata->queue.outq[wdata->queue.tail].data,
+ wdata->queue.outq[wdata->queue.tail].size);
+ if (ret < 0) {
+ spin_lock_irqsave(&wdata->state.lock, flags);
+ wiimote_cmd_abort(wdata);
+ spin_unlock_irqrestore(&wdata->state.lock, flags);
+ }
+ spin_lock_irqsave(&wdata->queue.lock, flags);
- wdata->tail = (wdata->tail + 1) % WIIMOTE_BUFSIZE;
+ wdata->queue.tail = (wdata->queue.tail + 1) % WIIMOTE_BUFSIZE;
}
- spin_unlock_irqrestore(&wdata->qlock, flags);
+ spin_unlock_irqrestore(&wdata->queue.lock, flags);
}
static void wiimote_queue(struct wiimote_data *wdata, const __u8 *buffer,
@@ -103,7 +78,9 @@ static void wiimote_queue(struct wiimote_data *wdata, const __u8 *buffer,
if (count > HID_MAX_BUFFER_SIZE) {
hid_warn(wdata->hdev, "Sending too large output report\n");
- return;
+
+ spin_lock_irqsave(&wdata->queue.lock, flags);
+ goto out_error;
}
/*
@@ -116,22 +93,28 @@ static void wiimote_queue(struct wiimote_data *wdata, const __u8 *buffer,
* will reschedule itself until the queue is empty.
*/
- spin_lock_irqsave(&wdata->qlock, flags);
+ spin_lock_irqsave(&wdata->queue.lock, flags);
- memcpy(wdata->outq[wdata->head].data, buffer, count);
- wdata->outq[wdata->head].size = count;
- newhead = (wdata->head + 1) % WIIMOTE_BUFSIZE;
+ memcpy(wdata->queue.outq[wdata->queue.head].data, buffer, count);
+ wdata->queue.outq[wdata->queue.head].size = count;
+ newhead = (wdata->queue.head + 1) % WIIMOTE_BUFSIZE;
- if (wdata->head == wdata->tail) {
- wdata->head = newhead;
- schedule_work(&wdata->worker);
- } else if (newhead != wdata->tail) {
- wdata->head = newhead;
+ if (wdata->queue.head == wdata->queue.tail) {
+ wdata->queue.head = newhead;
+ schedule_work(&wdata->queue.worker);
+ } else if (newhead != wdata->queue.tail) {
+ wdata->queue.head = newhead;
} else {
hid_warn(wdata->hdev, "Output queue is full");
+ goto out_error;
}
- spin_unlock_irqrestore(&wdata->qlock, flags);
+ goto out_unlock;
+
+out_error:
+ wiimote_cmd_abort(wdata);
+out_unlock:
+ spin_unlock_irqrestore(&wdata->queue.lock, flags);
}
/*
@@ -147,7 +130,7 @@ static inline void wiiproto_keep_rumble(struct wiimote_data *wdata, __u8 *cmd1)
*cmd1 |= 0x01;
}
-static void wiiproto_req_rumble(struct wiimote_data *wdata, __u8 rumble)
+void wiiproto_req_rumble(struct wiimote_data *wdata, __u8 rumble)
{
__u8 cmd[2];
@@ -167,7 +150,7 @@ static void wiiproto_req_rumble(struct wiimote_data *wdata, __u8 rumble)
wiimote_queue(wdata, cmd, sizeof(cmd));
}
-static void wiiproto_req_leds(struct wiimote_data *wdata, int leds)
+void wiiproto_req_leds(struct wiimote_data *wdata, int leds)
{
__u8 cmd[2];
@@ -196,17 +179,46 @@ static void wiiproto_req_leds(struct wiimote_data *wdata, int leds)
* Check what peripherals of the wiimote are currently
* active and select a proper DRM that supports all of
* the requested data inputs.
+ *
+ * Not all combinations are actually supported. The following
+ * combinations work only with limitations:
+ * - IR cam in extended or full mode disables any data transmission
+ * of extension controllers. There is no DRM mode that supports
+ * extension bytes plus extended/full IR.
+ * - IR cam with accelerometer and extension *_EXT8 is not supported.
+ * However, all extensions that need *_EXT8 are devices that don't
+ * support IR cameras. Hence, this shouldn't happen under normal
+ * operation.
+ * - *_EXT16 is only supported in combination with buttons and
+ * accelerometer. No IR or similar can be active simultaneously. As
+ * above, all modules that require it are mutually exclusive with
+ * IR/etc. so this doesn't matter.
*/
static __u8 select_drm(struct wiimote_data *wdata)
{
__u8 ir = wdata->state.flags & WIIPROTO_FLAGS_IR;
- bool ext = wiiext_active(wdata);
+ bool ext;
- if (ir == WIIPROTO_FLAG_IR_BASIC) {
- if (wdata->state.flags & WIIPROTO_FLAG_ACCEL)
- return WIIPROTO_REQ_DRM_KAIE;
+ ext = (wdata->state.flags & WIIPROTO_FLAG_EXT_USED) ||
+ (wdata->state.flags & WIIPROTO_FLAG_MP_USED);
+
+ /* some 3rd-party balance-boards are hard-coded to KEE, *sigh* */
+ if (wdata->state.devtype == WIIMOTE_DEV_BALANCE_BOARD) {
+ if (ext)
+ return WIIPROTO_REQ_DRM_KEE;
else
+ return WIIPROTO_REQ_DRM_K;
+ }
+
+ if (ir == WIIPROTO_FLAG_IR_BASIC) {
+ if (wdata->state.flags & WIIPROTO_FLAG_ACCEL) {
+ if (ext)
+ return WIIPROTO_REQ_DRM_KAIE;
+ else
+ return WIIPROTO_REQ_DRM_KAI;
+ } else {
return WIIPROTO_REQ_DRM_KIE;
+ }
} else if (ir == WIIPROTO_FLAG_IR_EXT) {
return WIIPROTO_REQ_DRM_KAI;
} else if (ir == WIIPROTO_FLAG_IR_FULL) {
@@ -219,7 +231,7 @@ static __u8 select_drm(struct wiimote_data *wdata)
return WIIPROTO_REQ_DRM_KA;
} else {
if (ext)
- return WIIPROTO_REQ_DRM_KE;
+ return WIIPROTO_REQ_DRM_KEE;
else
return WIIPROTO_REQ_DRM_K;
}
@@ -230,7 +242,9 @@ void wiiproto_req_drm(struct wiimote_data *wdata, __u8 drm)
{
__u8 cmd[3];
- if (drm == WIIPROTO_REQ_NULL)
+ if (wdata->state.flags & WIIPROTO_FLAG_DRM_LOCKED)
+ drm = wdata->state.drm;
+ else if (drm == WIIPROTO_REQ_NULL)
drm = select_drm(wdata);
cmd[0] = WIIPROTO_REQ_DRM;
@@ -242,7 +256,7 @@ void wiiproto_req_drm(struct wiimote_data *wdata, __u8 drm)
wiimote_queue(wdata, cmd, sizeof(cmd));
}
-static void wiiproto_req_status(struct wiimote_data *wdata)
+void wiiproto_req_status(struct wiimote_data *wdata)
{
__u8 cmd[2];
@@ -253,7 +267,7 @@ static void wiiproto_req_status(struct wiimote_data *wdata)
wiimote_queue(wdata, cmd, sizeof(cmd));
}
-static void wiiproto_req_accel(struct wiimote_data *wdata, __u8 accel)
+void wiiproto_req_accel(struct wiimote_data *wdata, __u8 accel)
{
accel = !!accel;
if (accel == !!(wdata->state.flags & WIIPROTO_FLAG_ACCEL))
@@ -267,7 +281,7 @@ static void wiiproto_req_accel(struct wiimote_data *wdata, __u8 accel)
wiiproto_req_drm(wdata, WIIPROTO_REQ_NULL);
}
-static void wiiproto_req_ir1(struct wiimote_data *wdata, __u8 flags)
+void wiiproto_req_ir1(struct wiimote_data *wdata, __u8 flags)
{
__u8 cmd[2];
@@ -278,7 +292,7 @@ static void wiiproto_req_ir1(struct wiimote_data *wdata, __u8 flags)
wiimote_queue(wdata, cmd, sizeof(cmd));
}
-static void wiiproto_req_ir2(struct wiimote_data *wdata, __u8 flags)
+void wiiproto_req_ir2(struct wiimote_data *wdata, __u8 flags)
{
__u8 cmd[2];
@@ -394,399 +408,998 @@ ssize_t wiimote_cmd_read(struct wiimote_data *wdata, __u32 offset, __u8 *rmem,
return ret;
}
-static int wiimote_battery_get_property(struct power_supply *psy,
- enum power_supply_property psp,
- union power_supply_propval *val)
+/* requires the cmd-mutex to be held */
+static int wiimote_cmd_init_ext(struct wiimote_data *wdata)
{
- struct wiimote_data *wdata = container_of(psy,
- struct wiimote_data, battery);
- int ret = 0, state;
- unsigned long flags;
+ __u8 wmem;
+ int ret;
- if (psp == POWER_SUPPLY_PROP_SCOPE) {
- val->intval = POWER_SUPPLY_SCOPE_DEVICE;
- return 0;
- }
+ /* initialize extension */
+ wmem = 0x55;
+ ret = wiimote_cmd_write(wdata, 0xa400f0, &wmem, sizeof(wmem));
+ if (ret)
+ return ret;
- ret = wiimote_cmd_acquire(wdata);
+ /* disable default encryption */
+ wmem = 0x0;
+ ret = wiimote_cmd_write(wdata, 0xa400fb, &wmem, sizeof(wmem));
if (ret)
return ret;
- spin_lock_irqsave(&wdata->state.lock, flags);
- wiimote_cmd_set(wdata, WIIPROTO_REQ_SREQ, 0);
- wiiproto_req_status(wdata);
- spin_unlock_irqrestore(&wdata->state.lock, flags);
+ return 0;
+}
- ret = wiimote_cmd_wait(wdata);
- state = wdata->state.cmd_battery;
- wiimote_cmd_release(wdata);
+/* requires the cmd-mutex to be held */
+static __u8 wiimote_cmd_read_ext(struct wiimote_data *wdata, __u8 *rmem)
+{
+ int ret;
+
+ /* read extension ID */
+ ret = wiimote_cmd_read(wdata, 0xa400fa, rmem, 6);
+ if (ret != 6)
+ return WIIMOTE_EXT_NONE;
+
+ hid_dbg(wdata->hdev, "extension ID: %02x:%02x %02x:%02x %02x:%02x\n",
+ rmem[0], rmem[1], rmem[2], rmem[3], rmem[4], rmem[5]);
+ if (rmem[0] == 0xff && rmem[1] == 0xff && rmem[2] == 0xff &&
+ rmem[3] == 0xff && rmem[4] == 0xff && rmem[5] == 0xff)
+ return WIIMOTE_EXT_NONE;
+
+ if (rmem[4] == 0x00 && rmem[5] == 0x00)
+ return WIIMOTE_EXT_NUNCHUK;
+ if (rmem[4] == 0x01 && rmem[5] == 0x01)
+ return WIIMOTE_EXT_CLASSIC_CONTROLLER;
+ if (rmem[4] == 0x04 && rmem[5] == 0x02)
+ return WIIMOTE_EXT_BALANCE_BOARD;
+ if (rmem[4] == 0x01 && rmem[5] == 0x20)
+ return WIIMOTE_EXT_PRO_CONTROLLER;
+
+ return WIIMOTE_EXT_UNKNOWN;
+}
+
+/* requires the cmd-mutex to be held */
+static int wiimote_cmd_init_mp(struct wiimote_data *wdata)
+{
+ __u8 wmem;
+ int ret;
+
+ /* initialize MP */
+ wmem = 0x55;
+ ret = wiimote_cmd_write(wdata, 0xa600f0, &wmem, sizeof(wmem));
if (ret)
return ret;
- switch (psp) {
- case POWER_SUPPLY_PROP_CAPACITY:
- val->intval = state * 100 / 255;
- break;
- default:
- ret = -EINVAL;
- break;
+ /* disable default encryption */
+ wmem = 0x0;
+ ret = wiimote_cmd_write(wdata, 0xa600fb, &wmem, sizeof(wmem));
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+/* requires the cmd-mutex to be held */
+static bool wiimote_cmd_map_mp(struct wiimote_data *wdata, __u8 exttype)
+{
+ __u8 wmem;
+
+ /* map MP with correct pass-through mode */
+ switch (exttype) {
+ case WIIMOTE_EXT_CLASSIC_CONTROLLER:
+ wmem = 0x07;
+ break;
+ case WIIMOTE_EXT_NUNCHUK:
+ wmem = 0x05;
+ break;
+ default:
+ wmem = 0x04;
+ break;
}
- return ret;
+ return wiimote_cmd_write(wdata, 0xa600fe, &wmem, sizeof(wmem));
}
-static int wiimote_init_ir(struct wiimote_data *wdata, __u16 mode)
+/* requires the cmd-mutex to be held */
+static bool wiimote_cmd_read_mp(struct wiimote_data *wdata, __u8 *rmem)
{
int ret;
- unsigned long flags;
- __u8 format = 0;
- static const __u8 data_enable[] = { 0x01 };
- static const __u8 data_sens1[] = { 0x02, 0x00, 0x00, 0x71, 0x01,
- 0x00, 0xaa, 0x00, 0x64 };
- static const __u8 data_sens2[] = { 0x63, 0x03 };
- static const __u8 data_fin[] = { 0x08 };
- spin_lock_irqsave(&wdata->state.lock, flags);
+ /* read motion plus ID */
+ ret = wiimote_cmd_read(wdata, 0xa600fa, rmem, 6);
+ if (ret != 6)
+ return false;
- if (mode == (wdata->state.flags & WIIPROTO_FLAGS_IR)) {
- spin_unlock_irqrestore(&wdata->state.lock, flags);
- return 0;
- }
+ hid_dbg(wdata->hdev, "motion plus ID: %02x:%02x %02x:%02x %02x:%02x\n",
+ rmem[0], rmem[1], rmem[2], rmem[3], rmem[4], rmem[5]);
- if (mode == 0) {
- wdata->state.flags &= ~WIIPROTO_FLAGS_IR;
- wiiproto_req_ir1(wdata, 0);
- wiiproto_req_ir2(wdata, 0);
- wiiproto_req_drm(wdata, WIIPROTO_REQ_NULL);
- spin_unlock_irqrestore(&wdata->state.lock, flags);
- return 0;
- }
+ if (rmem[5] == 0x05)
+ return true;
- spin_unlock_irqrestore(&wdata->state.lock, flags);
+ hid_info(wdata->hdev, "unknown motion plus ID: %02x:%02x %02x:%02x %02x:%02x\n",
+ rmem[0], rmem[1], rmem[2], rmem[3], rmem[4], rmem[5]);
- ret = wiimote_cmd_acquire(wdata);
- if (ret)
- return ret;
+ return false;
+}
- /* send PIXEL CLOCK ENABLE cmd first */
- spin_lock_irqsave(&wdata->state.lock, flags);
- wiimote_cmd_set(wdata, WIIPROTO_REQ_IR1, 0);
- wiiproto_req_ir1(wdata, 0x06);
- spin_unlock_irqrestore(&wdata->state.lock, flags);
+/* requires the cmd-mutex to be held */
+static __u8 wiimote_cmd_read_mp_mapped(struct wiimote_data *wdata)
+{
+ int ret;
+ __u8 rmem[6];
- ret = wiimote_cmd_wait(wdata);
- if (ret)
- goto unlock;
- if (wdata->state.cmd_err) {
- ret = -EIO;
- goto unlock;
+ /* read motion plus ID */
+ ret = wiimote_cmd_read(wdata, 0xa400fa, rmem, 6);
+ if (ret != 6)
+ return WIIMOTE_MP_NONE;
+
+ hid_dbg(wdata->hdev, "mapped motion plus ID: %02x:%02x %02x:%02x %02x:%02x\n",
+ rmem[0], rmem[1], rmem[2], rmem[3], rmem[4], rmem[5]);
+
+ if (rmem[0] == 0xff && rmem[1] == 0xff && rmem[2] == 0xff &&
+ rmem[3] == 0xff && rmem[4] == 0xff && rmem[5] == 0xff)
+ return WIIMOTE_MP_NONE;
+
+ if (rmem[4] == 0x04 && rmem[5] == 0x05)
+ return WIIMOTE_MP_SINGLE;
+ else if (rmem[4] == 0x05 && rmem[5] == 0x05)
+ return WIIMOTE_MP_PASSTHROUGH_NUNCHUK;
+ else if (rmem[4] == 0x07 && rmem[5] == 0x05)
+ return WIIMOTE_MP_PASSTHROUGH_CLASSIC;
+
+ return WIIMOTE_MP_UNKNOWN;
+}
+
+/* device module handling */
+
+static const __u8 * const wiimote_devtype_mods[WIIMOTE_DEV_NUM] = {
+ [WIIMOTE_DEV_PENDING] = (const __u8[]){
+ WIIMOD_NULL,
+ },
+ [WIIMOTE_DEV_UNKNOWN] = (const __u8[]){
+ WIIMOD_NO_MP,
+ WIIMOD_NULL,
+ },
+ [WIIMOTE_DEV_GENERIC] = (const __u8[]){
+ WIIMOD_KEYS,
+ WIIMOD_RUMBLE,
+ WIIMOD_BATTERY,
+ WIIMOD_LED1,
+ WIIMOD_LED2,
+ WIIMOD_LED3,
+ WIIMOD_LED4,
+ WIIMOD_ACCEL,
+ WIIMOD_IR,
+ WIIMOD_NULL,
+ },
+ [WIIMOTE_DEV_GEN10] = (const __u8[]){
+ WIIMOD_KEYS,
+ WIIMOD_RUMBLE,
+ WIIMOD_BATTERY,
+ WIIMOD_LED1,
+ WIIMOD_LED2,
+ WIIMOD_LED3,
+ WIIMOD_LED4,
+ WIIMOD_ACCEL,
+ WIIMOD_IR,
+ WIIMOD_NULL,
+ },
+ [WIIMOTE_DEV_GEN20] = (const __u8[]){
+ WIIMOD_KEYS,
+ WIIMOD_RUMBLE,
+ WIIMOD_BATTERY,
+ WIIMOD_LED1,
+ WIIMOD_LED2,
+ WIIMOD_LED3,
+ WIIMOD_LED4,
+ WIIMOD_ACCEL,
+ WIIMOD_IR,
+ WIIMOD_BUILTIN_MP,
+ WIIMOD_NULL,
+ },
+ [WIIMOTE_DEV_BALANCE_BOARD] = (const __u8[]) {
+ WIIMOD_BATTERY,
+ WIIMOD_LED1,
+ WIIMOD_NO_MP,
+ WIIMOD_NULL,
+ },
+ [WIIMOTE_DEV_PRO_CONTROLLER] = (const __u8[]) {
+ WIIMOD_BATTERY,
+ WIIMOD_LED1,
+ WIIMOD_LED2,
+ WIIMOD_LED3,
+ WIIMOD_LED4,
+ WIIMOD_NO_MP,
+ WIIMOD_NULL,
+ },
+};
+
+static void wiimote_modules_load(struct wiimote_data *wdata,
+ unsigned int devtype)
+{
+ bool need_input = false;
+ const __u8 *mods, *iter;
+ const struct wiimod_ops *ops;
+ int ret;
+
+ mods = wiimote_devtype_mods[devtype];
+
+ for (iter = mods; *iter != WIIMOD_NULL; ++iter) {
+ if (wiimod_table[*iter]->flags & WIIMOD_FLAG_INPUT) {
+ need_input = true;
+ break;
+ }
}
- /* enable IR LOGIC */
- spin_lock_irqsave(&wdata->state.lock, flags);
- wiimote_cmd_set(wdata, WIIPROTO_REQ_IR2, 0);
- wiiproto_req_ir2(wdata, 0x06);
- spin_unlock_irqrestore(&wdata->state.lock, flags);
+ if (need_input) {
+ wdata->input = input_allocate_device();
+ if (!wdata->input)
+ return;
+
+ input_set_drvdata(wdata->input, wdata);
+ wdata->input->dev.parent = &wdata->hdev->dev;
+ wdata->input->id.bustype = wdata->hdev->bus;
+ wdata->input->id.vendor = wdata->hdev->vendor;
+ wdata->input->id.product = wdata->hdev->product;
+ wdata->input->id.version = wdata->hdev->version;
+ wdata->input->name = WIIMOTE_NAME;
+ }
- ret = wiimote_cmd_wait(wdata);
- if (ret)
- goto unlock;
- if (wdata->state.cmd_err) {
- ret = -EIO;
- goto unlock;
+ for (iter = mods; *iter != WIIMOD_NULL; ++iter) {
+ ops = wiimod_table[*iter];
+ if (!ops->probe)
+ continue;
+
+ ret = ops->probe(ops, wdata);
+ if (ret)
+ goto error;
}
- /* enable IR cam but do not make it send data, yet */
- ret = wiimote_cmd_write(wdata, 0xb00030, data_enable,
- sizeof(data_enable));
- if (ret)
- goto unlock;
+ if (wdata->input) {
+ ret = input_register_device(wdata->input);
+ if (ret)
+ goto error;
+ }
- /* write first sensitivity block */
- ret = wiimote_cmd_write(wdata, 0xb00000, data_sens1,
- sizeof(data_sens1));
- if (ret)
- goto unlock;
+ spin_lock_irq(&wdata->state.lock);
+ wdata->state.devtype = devtype;
+ spin_unlock_irq(&wdata->state.lock);
+ return;
- /* write second sensitivity block */
- ret = wiimote_cmd_write(wdata, 0xb0001a, data_sens2,
- sizeof(data_sens2));
- if (ret)
- goto unlock;
+error:
+ for ( ; iter-- != mods; ) {
+ ops = wiimod_table[*iter];
+ if (ops->remove)
+ ops->remove(ops, wdata);
+ }
- /* put IR cam into desired state */
- switch (mode) {
- case WIIPROTO_FLAG_IR_FULL:
- format = 5;
- break;
- case WIIPROTO_FLAG_IR_EXT:
- format = 3;
- break;
- case WIIPROTO_FLAG_IR_BASIC:
- format = 1;
- break;
+ if (wdata->input) {
+ input_free_device(wdata->input);
+ wdata->input = NULL;
}
- ret = wiimote_cmd_write(wdata, 0xb00033, &format, sizeof(format));
- if (ret)
- goto unlock;
+}
- /* make IR cam send data */
- ret = wiimote_cmd_write(wdata, 0xb00030, data_fin, sizeof(data_fin));
- if (ret)
- goto unlock;
+static void wiimote_modules_unload(struct wiimote_data *wdata)
+{
+ const __u8 *mods, *iter;
+ const struct wiimod_ops *ops;
+ unsigned long flags;
+
+ mods = wiimote_devtype_mods[wdata->state.devtype];
- /* request new DRM mode compatible to IR mode */
spin_lock_irqsave(&wdata->state.lock, flags);
- wdata->state.flags &= ~WIIPROTO_FLAGS_IR;
- wdata->state.flags |= mode & WIIPROTO_FLAGS_IR;
- wiiproto_req_drm(wdata, WIIPROTO_REQ_NULL);
+ wdata->state.devtype = WIIMOTE_DEV_UNKNOWN;
spin_unlock_irqrestore(&wdata->state.lock, flags);
-unlock:
- wiimote_cmd_release(wdata);
- return ret;
+ /* find end of list */
+ for (iter = mods; *iter != WIIMOD_NULL; ++iter)
+ /* empty */ ;
+
+ if (wdata->input) {
+ input_get_device(wdata->input);
+ input_unregister_device(wdata->input);
+ }
+
+ for ( ; iter-- != mods; ) {
+ ops = wiimod_table[*iter];
+ if (ops->remove)
+ ops->remove(ops, wdata);
+ }
+
+ if (wdata->input) {
+ input_put_device(wdata->input);
+ wdata->input = NULL;
+ }
}
-static enum led_brightness wiimote_leds_get(struct led_classdev *led_dev)
+/* device extension handling */
+
+static void wiimote_ext_load(struct wiimote_data *wdata, unsigned int ext)
{
- struct wiimote_data *wdata;
- struct device *dev = led_dev->dev->parent;
- int i;
unsigned long flags;
- bool value = false;
+ const struct wiimod_ops *ops;
+ int ret;
- wdata = hid_get_drvdata(container_of(dev, struct hid_device, dev));
+ ops = wiimod_ext_table[ext];
- for (i = 0; i < 4; ++i) {
- if (wdata->leds[i] == led_dev) {
- spin_lock_irqsave(&wdata->state.lock, flags);
- value = wdata->state.flags & WIIPROTO_FLAG_LED(i + 1);
- spin_unlock_irqrestore(&wdata->state.lock, flags);
- break;
- }
+ if (ops->probe) {
+ ret = ops->probe(ops, wdata);
+ if (ret)
+ ext = WIIMOTE_EXT_UNKNOWN;
}
- return value ? LED_FULL : LED_OFF;
+ spin_lock_irqsave(&wdata->state.lock, flags);
+ wdata->state.exttype = ext;
+ spin_unlock_irqrestore(&wdata->state.lock, flags);
}
-static void wiimote_leds_set(struct led_classdev *led_dev,
- enum led_brightness value)
+static void wiimote_ext_unload(struct wiimote_data *wdata)
{
- struct wiimote_data *wdata;
- struct device *dev = led_dev->dev->parent;
- int i;
unsigned long flags;
- __u8 state, flag;
+ const struct wiimod_ops *ops;
- wdata = hid_get_drvdata(container_of(dev, struct hid_device, dev));
+ ops = wiimod_ext_table[wdata->state.exttype];
- for (i = 0; i < 4; ++i) {
- if (wdata->leds[i] == led_dev) {
- flag = WIIPROTO_FLAG_LED(i + 1);
- spin_lock_irqsave(&wdata->state.lock, flags);
- state = wdata->state.flags;
- if (value == LED_OFF)
- wiiproto_req_leds(wdata, state & ~flag);
- else
- wiiproto_req_leds(wdata, state | flag);
- spin_unlock_irqrestore(&wdata->state.lock, flags);
- break;
- }
+ spin_lock_irqsave(&wdata->state.lock, flags);
+ wdata->state.exttype = WIIMOTE_EXT_UNKNOWN;
+ wdata->state.flags &= ~WIIPROTO_FLAG_EXT_USED;
+ spin_unlock_irqrestore(&wdata->state.lock, flags);
+
+ if (ops->remove)
+ ops->remove(ops, wdata);
+}
+
+static void wiimote_mp_load(struct wiimote_data *wdata)
+{
+ unsigned long flags;
+ const struct wiimod_ops *ops;
+ int ret;
+ __u8 mode = 2;
+
+ ops = &wiimod_mp;
+ if (ops->probe) {
+ ret = ops->probe(ops, wdata);
+ if (ret)
+ mode = 1;
}
+
+ spin_lock_irqsave(&wdata->state.lock, flags);
+ wdata->state.mp = mode;
+ spin_unlock_irqrestore(&wdata->state.lock, flags);
}
-static int wiimote_ff_play(struct input_dev *dev, void *data,
- struct ff_effect *eff)
+static void wiimote_mp_unload(struct wiimote_data *wdata)
{
- struct wiimote_data *wdata = input_get_drvdata(dev);
- __u8 value;
unsigned long flags;
+ const struct wiimod_ops *ops;
- /*
- * The wiimote supports only a single rumble motor so if any magnitude
- * is set to non-zero then we start the rumble motor. If both are set to
- * zero, we stop the rumble motor.
- */
+ if (wdata->state.mp < 2)
+ return;
- if (eff->u.rumble.strong_magnitude || eff->u.rumble.weak_magnitude)
- value = 1;
- else
- value = 0;
+ ops = &wiimod_mp;
spin_lock_irqsave(&wdata->state.lock, flags);
- wiiproto_req_rumble(wdata, value);
+ wdata->state.mp = 0;
+ wdata->state.flags &= ~WIIPROTO_FLAG_MP_USED;
spin_unlock_irqrestore(&wdata->state.lock, flags);
- return 0;
+ if (ops->remove)
+ ops->remove(ops, wdata);
}
-static int wiimote_input_open(struct input_dev *dev)
-{
- struct wiimote_data *wdata = input_get_drvdata(dev);
+/* device (re-)initialization and detection */
- return hid_hw_open(wdata->hdev);
-}
+static const char *wiimote_devtype_names[WIIMOTE_DEV_NUM] = {
+ [WIIMOTE_DEV_PENDING] = "Pending",
+ [WIIMOTE_DEV_UNKNOWN] = "Unknown",
+ [WIIMOTE_DEV_GENERIC] = "Generic",
+ [WIIMOTE_DEV_GEN10] = "Nintendo Wii Remote (Gen 1)",
+ [WIIMOTE_DEV_GEN20] = "Nintendo Wii Remote Plus (Gen 2)",
+ [WIIMOTE_DEV_BALANCE_BOARD] = "Nintendo Wii Balance Board",
+ [WIIMOTE_DEV_PRO_CONTROLLER] = "Nintendo Wii U Pro Controller",
+};
-static void wiimote_input_close(struct input_dev *dev)
+/* Try to guess the device type based on all collected information. We
+ * first try to detect by static extension types, then VID/PID and the
+ * device name. If we cannot detect the device, we use
+ * WIIMOTE_DEV_GENERIC so all modules will get probed on the device. */
+static void wiimote_init_set_type(struct wiimote_data *wdata,
+ __u8 exttype)
{
- struct wiimote_data *wdata = input_get_drvdata(dev);
+ __u8 devtype = WIIMOTE_DEV_GENERIC;
+ __u16 vendor, product;
+ const char *name;
+
+ vendor = wdata->hdev->vendor;
+ product = wdata->hdev->product;
+ name = wdata->hdev->name;
+
+ if (exttype == WIIMOTE_EXT_BALANCE_BOARD) {
+ devtype = WIIMOTE_DEV_BALANCE_BOARD;
+ goto done;
+ } else if (exttype == WIIMOTE_EXT_PRO_CONTROLLER) {
+ devtype = WIIMOTE_DEV_PRO_CONTROLLER;
+ goto done;
+ }
- hid_hw_close(wdata->hdev);
+ if (!strcmp(name, "Nintendo RVL-CNT-01")) {
+ devtype = WIIMOTE_DEV_GEN10;
+ goto done;
+ } else if (!strcmp(name, "Nintendo RVL-CNT-01-TR")) {
+ devtype = WIIMOTE_DEV_GEN20;
+ goto done;
+ } else if (!strcmp(name, "Nintendo RVL-WBC-01")) {
+ devtype = WIIMOTE_DEV_BALANCE_BOARD;
+ goto done;
+ } else if (!strcmp(name, "Nintendo RVL-CNT-01-UC")) {
+ devtype = WIIMOTE_DEV_PRO_CONTROLLER;
+ goto done;
+ }
+
+ if (vendor == USB_VENDOR_ID_NINTENDO) {
+ if (product == USB_DEVICE_ID_NINTENDO_WIIMOTE) {
+ devtype = WIIMOTE_DEV_GEN10;
+ goto done;
+ } else if (product == USB_DEVICE_ID_NINTENDO_WIIMOTE2) {
+ devtype = WIIMOTE_DEV_GEN20;
+ goto done;
+ }
+ }
+
+done:
+ if (devtype == WIIMOTE_DEV_GENERIC)
+ hid_info(wdata->hdev, "cannot detect device; NAME: %s VID: %04x PID: %04x EXT: %04x\n",
+ name, vendor, product, exttype);
+ else
+ hid_info(wdata->hdev, "detected device: %s\n",
+ wiimote_devtype_names[devtype]);
+
+ wiimote_modules_load(wdata, devtype);
}
-static int wiimote_accel_open(struct input_dev *dev)
+static void wiimote_init_detect(struct wiimote_data *wdata)
{
- struct wiimote_data *wdata = input_get_drvdata(dev);
+ __u8 exttype = WIIMOTE_EXT_NONE, extdata[6];
+ bool ext;
int ret;
- unsigned long flags;
- ret = hid_hw_open(wdata->hdev);
+ wiimote_cmd_acquire_noint(wdata);
+
+ spin_lock_irq(&wdata->state.lock);
+ wdata->state.devtype = WIIMOTE_DEV_UNKNOWN;
+ wiimote_cmd_set(wdata, WIIPROTO_REQ_SREQ, 0);
+ wiiproto_req_status(wdata);
+ spin_unlock_irq(&wdata->state.lock);
+
+ ret = wiimote_cmd_wait_noint(wdata);
if (ret)
- return ret;
+ goto out_release;
- spin_lock_irqsave(&wdata->state.lock, flags);
- wiiproto_req_accel(wdata, true);
- spin_unlock_irqrestore(&wdata->state.lock, flags);
+ spin_lock_irq(&wdata->state.lock);
+ ext = wdata->state.flags & WIIPROTO_FLAG_EXT_PLUGGED;
+ spin_unlock_irq(&wdata->state.lock);
- return 0;
+ if (!ext)
+ goto out_release;
+
+ wiimote_cmd_init_ext(wdata);
+ exttype = wiimote_cmd_read_ext(wdata, extdata);
+
+out_release:
+ wiimote_cmd_release(wdata);
+ wiimote_init_set_type(wdata, exttype);
+
+ /* schedule MP timer */
+ spin_lock_irq(&wdata->state.lock);
+ if (!(wdata->state.flags & WIIPROTO_FLAG_BUILTIN_MP) &&
+ !(wdata->state.flags & WIIPROTO_FLAG_NO_MP))
+ mod_timer(&wdata->timer, jiffies + HZ * 4);
+ spin_unlock_irq(&wdata->state.lock);
}
-static void wiimote_accel_close(struct input_dev *dev)
+/*
+ * MP hotplug events are not generated by the wiimote. Therefore, we need
+ * polling to detect it. We use a 4s interval for polling MP registers. This
+ * seems reasonable considering applications can trigger it manually via
+ * sysfs requests.
+ */
+static void wiimote_init_poll_mp(struct wiimote_data *wdata)
{
- struct wiimote_data *wdata = input_get_drvdata(dev);
- unsigned long flags;
+ bool mp;
+ __u8 mpdata[6];
- spin_lock_irqsave(&wdata->state.lock, flags);
- wiiproto_req_accel(wdata, false);
- spin_unlock_irqrestore(&wdata->state.lock, flags);
+ wiimote_cmd_acquire_noint(wdata);
+ wiimote_cmd_init_mp(wdata);
+ mp = wiimote_cmd_read_mp(wdata, mpdata);
+ wiimote_cmd_release(wdata);
- hid_hw_close(wdata->hdev);
+ /* load/unload MP module if it changed */
+ if (mp) {
+ if (!wdata->state.mp) {
+ hid_info(wdata->hdev, "detected extension: Nintendo Wii Motion Plus\n");
+ wiimote_mp_load(wdata);
+ }
+ } else if (wdata->state.mp) {
+ wiimote_mp_unload(wdata);
+ }
+
+ mod_timer(&wdata->timer, jiffies + HZ * 4);
}
-static int wiimote_ir_open(struct input_dev *dev)
+/*
+ * Check whether the wiimote is in the expected state. The extension registers
+ * may change during hotplug and initialization so we might get hotplug events
+ * that we caused by remapping some memory.
+ * We use some heuristics here to check known states. If the wiimote is in the
+ * expected state, we can ignore the hotplug event.
+ *
+ * Returns "true" if the device is in expected state, "false" if we should
+ * redo hotplug handling and extension initialization.
+ */
+static bool wiimote_init_check(struct wiimote_data *wdata)
{
- struct wiimote_data *wdata = input_get_drvdata(dev);
- int ret;
+ __u32 flags;
+ __u8 type, data[6];
+ bool ret, poll_mp;
- ret = hid_hw_open(wdata->hdev);
- if (ret)
- return ret;
+ spin_lock_irq(&wdata->state.lock);
+ flags = wdata->state.flags;
+ spin_unlock_irq(&wdata->state.lock);
- ret = wiimote_init_ir(wdata, WIIPROTO_FLAG_IR_BASIC);
- if (ret) {
- hid_hw_close(wdata->hdev);
- return ret;
+ wiimote_cmd_acquire_noint(wdata);
+
+ /* If MP is used and active, but the extension is not, we expect:
+ * read_mp_mapped() == WIIMOTE_MP_SINGLE
+ * state.flags == !EXT_ACTIVE && !MP_PLUGGED && MP_ACTIVE
+ * We do not check EXT_PLUGGED because it might change during
+ * initialization of MP without extensions.
+ * - If MP is unplugged/replugged, read_mp_mapped() fails
+ * - If EXT is plugged, MP_PLUGGED will get set */
+ if (wdata->state.exttype == WIIMOTE_EXT_NONE &&
+ wdata->state.mp > 0 && (flags & WIIPROTO_FLAG_MP_USED)) {
+ type = wiimote_cmd_read_mp_mapped(wdata);
+ ret = type == WIIMOTE_MP_SINGLE;
+
+ spin_lock_irq(&wdata->state.lock);
+ ret = ret && !(wdata->state.flags & WIIPROTO_FLAG_EXT_ACTIVE);
+ ret = ret && !(wdata->state.flags & WIIPROTO_FLAG_MP_PLUGGED);
+ ret = ret && (wdata->state.flags & WIIPROTO_FLAG_MP_ACTIVE);
+ spin_unlock_irq(&wdata->state.lock);
+
+ if (!ret)
+ hid_dbg(wdata->hdev, "state left: !EXT && MP\n");
+
+ /* while MP is mapped, we get EXT_PLUGGED events */
+ poll_mp = false;
+
+ goto out_release;
}
- return 0;
+ /* If MP is unused, but the extension port is used, we expect:
+ * read_ext == state.exttype
+ * state.flags == !MP_ACTIVE && EXT_ACTIVE
+ * - If MP is plugged/unplugged, our timer detects it
+ * - If EXT is unplugged/replugged, EXT_ACTIVE will become unset */
+ if (!(flags & WIIPROTO_FLAG_MP_USED) &&
+ wdata->state.exttype != WIIMOTE_EXT_NONE) {
+ type = wiimote_cmd_read_ext(wdata, data);
+ ret = type == wdata->state.exttype;
+
+ spin_lock_irq(&wdata->state.lock);
+ ret = ret && !(wdata->state.flags & WIIPROTO_FLAG_MP_ACTIVE);
+ ret = ret && (wdata->state.flags & WIIPROTO_FLAG_EXT_ACTIVE);
+ spin_unlock_irq(&wdata->state.lock);
+
+ if (!ret)
+ hid_dbg(wdata->hdev, "state left: EXT && !MP\n");
+
+ /* poll MP for hotplug events */
+ poll_mp = true;
+
+ goto out_release;
+ }
+
+ /* If neither MP nor an extension are used, we expect:
+ * read_ext() == WIIMOTE_EXT_NONE
+ * state.flags == !MP_ACTIVE && !EXT_ACTIVE && !EXT_PLUGGED
+ * No need to perform any action in this case as everything is
+ * disabled already.
+ * - If MP is plugged/unplugged, our timer detects it
+ * - If EXT is plugged, EXT_PLUGGED will be set */
+ if (!(flags & WIIPROTO_FLAG_MP_USED) &&
+ wdata->state.exttype == WIIMOTE_EXT_NONE) {
+ type = wiimote_cmd_read_ext(wdata, data);
+ ret = type == wdata->state.exttype;
+
+ spin_lock_irq(&wdata->state.lock);
+ ret = ret && !(wdata->state.flags & WIIPROTO_FLAG_EXT_ACTIVE);
+ ret = ret && !(wdata->state.flags & WIIPROTO_FLAG_MP_ACTIVE);
+ ret = ret && !(wdata->state.flags & WIIPROTO_FLAG_EXT_PLUGGED);
+ spin_unlock_irq(&wdata->state.lock);
+
+ if (!ret)
+ hid_dbg(wdata->hdev, "state left: !EXT && !MP\n");
+
+ /* poll MP for hotplug events */
+ poll_mp = true;
+
+ goto out_release;
+ }
+
+ /* The trickiest part is if both EXT and MP are active. We cannot read
+ * the EXT ID, anymore, because MP is mapped over it. However, we use
+ * a handy trick here:
+ * - EXT_ACTIVE is unset whenever !MP_PLUGGED is sent
+ * MP_PLUGGED might be re-sent again before we are scheduled, but
+ * EXT_ACTIVE will stay unset.
+ * So it is enough to check for mp_mapped() and MP_ACTIVE and
+ * EXT_ACTIVE. EXT_PLUGGED is a sanity check. */
+ if (wdata->state.exttype != WIIMOTE_EXT_NONE &&
+ wdata->state.mp > 0 && (flags & WIIPROTO_FLAG_MP_USED)) {
+ type = wiimote_cmd_read_mp_mapped(wdata);
+ ret = type != WIIMOTE_MP_NONE;
+ ret = ret && type != WIIMOTE_MP_UNKNOWN;
+ ret = ret && type != WIIMOTE_MP_SINGLE;
+
+ spin_lock_irq(&wdata->state.lock);
+ ret = ret && (wdata->state.flags & WIIPROTO_FLAG_EXT_PLUGGED);
+ ret = ret && (wdata->state.flags & WIIPROTO_FLAG_EXT_ACTIVE);
+ ret = ret && (wdata->state.flags & WIIPROTO_FLAG_MP_ACTIVE);
+ spin_unlock_irq(&wdata->state.lock);
+
+ if (!ret)
+ hid_dbg(wdata->hdev, "state left: EXT && MP\n");
+
+ /* while MP is mapped, we get EXT_PLUGGED events */
+ poll_mp = false;
+
+ goto out_release;
+ }
+
+ /* unknown state */
+ ret = false;
+
+out_release:
+ wiimote_cmd_release(wdata);
+
+ /* only poll for MP if requested and if state didn't change */
+ if (ret && poll_mp && !(flags & WIIPROTO_FLAG_BUILTIN_MP) &&
+ !(flags & WIIPROTO_FLAG_NO_MP))
+ wiimote_init_poll_mp(wdata);
+
+ return ret;
}
-static void wiimote_ir_close(struct input_dev *dev)
+static const char *wiimote_exttype_names[WIIMOTE_EXT_NUM] = {
+ [WIIMOTE_EXT_NONE] = "None",
+ [WIIMOTE_EXT_UNKNOWN] = "Unknown",
+ [WIIMOTE_EXT_NUNCHUK] = "Nintendo Wii Nunchuk",
+ [WIIMOTE_EXT_CLASSIC_CONTROLLER] = "Nintendo Wii Classic Controller",
+ [WIIMOTE_EXT_BALANCE_BOARD] = "Nintendo Wii Balance Board",
+ [WIIMOTE_EXT_PRO_CONTROLLER] = "Nintendo Wii U Pro Controller",
+};
+
+/*
+ * Handle hotplug events
+ * If we receive an hotplug event and the device-check failed, we deinitialize
+ * the extension ports, re-read all extension IDs and set the device into
+ * the desired state. This involves mapping MP into the main extension
+ * registers, setting up extension passthrough modes and initializing the
+ * requested extensions.
+ */
+static void wiimote_init_hotplug(struct wiimote_data *wdata)
{
- struct wiimote_data *wdata = input_get_drvdata(dev);
+ __u8 exttype, extdata[6], mpdata[6];
+ __u32 flags;
+ bool mp;
- wiimote_init_ir(wdata, 0);
- hid_hw_close(wdata->hdev);
+ hid_dbg(wdata->hdev, "detect extensions..\n");
+
+ wiimote_cmd_acquire_noint(wdata);
+
+ spin_lock_irq(&wdata->state.lock);
+
+ /* get state snapshot that we will then work on */
+ flags = wdata->state.flags;
+
+ /* disable event forwarding temporarily */
+ wdata->state.flags &= ~WIIPROTO_FLAG_EXT_ACTIVE;
+ wdata->state.flags &= ~WIIPROTO_FLAG_MP_ACTIVE;
+
+ spin_unlock_irq(&wdata->state.lock);
+
+ /* init extension and MP (deactivates current extension or MP) */
+ wiimote_cmd_init_ext(wdata);
+ if (flags & WIIPROTO_FLAG_NO_MP) {
+ mp = false;
+ } else {
+ wiimote_cmd_init_mp(wdata);
+ mp = wiimote_cmd_read_mp(wdata, mpdata);
+ }
+ exttype = wiimote_cmd_read_ext(wdata, extdata);
+
+ wiimote_cmd_release(wdata);
+
+ /* load/unload extension module if it changed */
+ if (exttype != wdata->state.exttype) {
+ /* unload previous extension */
+ wiimote_ext_unload(wdata);
+
+ if (exttype == WIIMOTE_EXT_UNKNOWN) {
+ hid_info(wdata->hdev, "cannot detect extension; %02x:%02x %02x:%02x %02x:%02x\n",
+ extdata[0], extdata[1], extdata[2],
+ extdata[3], extdata[4], extdata[5]);
+ } else if (exttype == WIIMOTE_EXT_NONE) {
+ spin_lock_irq(&wdata->state.lock);
+ wdata->state.exttype = WIIMOTE_EXT_NONE;
+ spin_unlock_irq(&wdata->state.lock);
+ } else {
+ hid_info(wdata->hdev, "detected extension: %s\n",
+ wiimote_exttype_names[exttype]);
+ /* try loading new extension */
+ wiimote_ext_load(wdata, exttype);
+ }
+ }
+
+ /* load/unload MP module if it changed */
+ if (mp) {
+ if (!wdata->state.mp) {
+ hid_info(wdata->hdev, "detected extension: Nintendo Wii Motion Plus\n");
+ wiimote_mp_load(wdata);
+ }
+ } else if (wdata->state.mp) {
+ wiimote_mp_unload(wdata);
+ }
+
+ /* if MP is not used, do not map or activate it */
+ if (!(flags & WIIPROTO_FLAG_MP_USED))
+ mp = false;
+
+ /* map MP into main extension registers if used */
+ if (mp) {
+ wiimote_cmd_acquire_noint(wdata);
+ wiimote_cmd_map_mp(wdata, exttype);
+ wiimote_cmd_release(wdata);
+
+ /* delete MP hotplug timer */
+ del_timer_sync(&wdata->timer);
+ } else {
+ /* reschedule MP hotplug timer */
+ if (!(flags & WIIPROTO_FLAG_BUILTIN_MP) &&
+ !(flags & WIIPROTO_FLAG_NO_MP))
+ mod_timer(&wdata->timer, jiffies + HZ * 4);
+ }
+
+ spin_lock_irq(&wdata->state.lock);
+
+ /* enable data forwarding again and set expected hotplug state */
+ if (mp) {
+ wdata->state.flags |= WIIPROTO_FLAG_MP_ACTIVE;
+ if (wdata->state.exttype == WIIMOTE_EXT_NONE) {
+ wdata->state.flags &= ~WIIPROTO_FLAG_EXT_PLUGGED;
+ wdata->state.flags &= ~WIIPROTO_FLAG_MP_PLUGGED;
+ } else {
+ wdata->state.flags &= ~WIIPROTO_FLAG_EXT_PLUGGED;
+ wdata->state.flags |= WIIPROTO_FLAG_MP_PLUGGED;
+ wdata->state.flags |= WIIPROTO_FLAG_EXT_ACTIVE;
+ }
+ } else if (wdata->state.exttype != WIIMOTE_EXT_NONE) {
+ wdata->state.flags |= WIIPROTO_FLAG_EXT_ACTIVE;
+ }
+
+ /* request status report for hotplug state updates */
+ wiiproto_req_status(wdata);
+
+ spin_unlock_irq(&wdata->state.lock);
+
+ hid_dbg(wdata->hdev, "detected extensions: MP: %d EXT: %d\n",
+ wdata->state.mp, wdata->state.exttype);
}
-static void handler_keys(struct wiimote_data *wdata, const __u8 *payload)
+static void wiimote_init_worker(struct work_struct *work)
+{
+ struct wiimote_data *wdata = container_of(work, struct wiimote_data,
+ init_worker);
+ bool changed = false;
+
+ if (wdata->state.devtype == WIIMOTE_DEV_PENDING) {
+ wiimote_init_detect(wdata);
+ changed = true;
+ }
+
+ if (changed || !wiimote_init_check(wdata))
+ wiimote_init_hotplug(wdata);
+
+ if (changed)
+ kobject_uevent(&wdata->hdev->dev.kobj, KOBJ_CHANGE);
+}
+
+void __wiimote_schedule(struct wiimote_data *wdata)
{
- input_report_key(wdata->input, wiiproto_keymap[WIIPROTO_KEY_LEFT],
- !!(payload[0] & 0x01));
- input_report_key(wdata->input, wiiproto_keymap[WIIPROTO_KEY_RIGHT],
- !!(payload[0] & 0x02));
- input_report_key(wdata->input, wiiproto_keymap[WIIPROTO_KEY_DOWN],
- !!(payload[0] & 0x04));
- input_report_key(wdata->input, wiiproto_keymap[WIIPROTO_KEY_UP],
- !!(payload[0] & 0x08));
- input_report_key(wdata->input, wiiproto_keymap[WIIPROTO_KEY_PLUS],
- !!(payload[0] & 0x10));
- input_report_key(wdata->input, wiiproto_keymap[WIIPROTO_KEY_TWO],
- !!(payload[1] & 0x01));
- input_report_key(wdata->input, wiiproto_keymap[WIIPROTO_KEY_ONE],
- !!(payload[1] & 0x02));
- input_report_key(wdata->input, wiiproto_keymap[WIIPROTO_KEY_B],
- !!(payload[1] & 0x04));
- input_report_key(wdata->input, wiiproto_keymap[WIIPROTO_KEY_A],
- !!(payload[1] & 0x08));
- input_report_key(wdata->input, wiiproto_keymap[WIIPROTO_KEY_MINUS],
- !!(payload[1] & 0x10));
- input_report_key(wdata->input, wiiproto_keymap[WIIPROTO_KEY_HOME],
- !!(payload[1] & 0x80));
- input_sync(wdata->input);
+ if (!(wdata->state.flags & WIIPROTO_FLAG_EXITING))
+ schedule_work(&wdata->init_worker);
}
-static void handler_accel(struct wiimote_data *wdata, const __u8 *payload)
+static void wiimote_schedule(struct wiimote_data *wdata)
{
- __u16 x, y, z;
+ unsigned long flags;
- if (!(wdata->state.flags & WIIPROTO_FLAG_ACCEL))
- return;
+ spin_lock_irqsave(&wdata->state.lock, flags);
+ __wiimote_schedule(wdata);
+ spin_unlock_irqrestore(&wdata->state.lock, flags);
+}
- /*
- * payload is: BB BB XX YY ZZ
- * Accelerometer data is encoded into 3 10bit values. XX, YY and ZZ
- * contain the upper 8 bits of each value. The lower 2 bits are
- * contained in the buttons data BB BB.
- * Bits 6 and 7 of the first buttons byte BB is the lower 2 bits of the
- * X accel value. Bit 5 of the second buttons byte is the 2nd bit of Y
- * accel value and bit 6 is the second bit of the Z value.
- * The first bit of Y and Z values is not available and always set to 0.
- * 0x200 is returned on no movement.
- */
+static void wiimote_init_timeout(unsigned long arg)
+{
+ struct wiimote_data *wdata = (void*)arg;
- x = payload[2] << 2;
- y = payload[3] << 2;
- z = payload[4] << 2;
+ wiimote_schedule(wdata);
+}
+
+/* protocol handlers */
+
+static void handler_keys(struct wiimote_data *wdata, const __u8 *payload)
+{
+ const __u8 *iter, *mods;
+ const struct wiimod_ops *ops;
- x |= (payload[0] >> 5) & 0x3;
- y |= (payload[1] >> 4) & 0x2;
- z |= (payload[1] >> 5) & 0x2;
+ ops = wiimod_ext_table[wdata->state.exttype];
+ if (ops->in_keys) {
+ ops->in_keys(wdata, payload);
+ return;
+ }
- input_report_abs(wdata->accel, ABS_RX, x - 0x200);
- input_report_abs(wdata->accel, ABS_RY, y - 0x200);
- input_report_abs(wdata->accel, ABS_RZ, z - 0x200);
- input_sync(wdata->accel);
+ mods = wiimote_devtype_mods[wdata->state.devtype];
+ for (iter = mods; *iter != WIIMOD_NULL; ++iter) {
+ ops = wiimod_table[*iter];
+ if (ops->in_keys) {
+ ops->in_keys(wdata, payload);
+ break;
+ }
+ }
}
-#define ir_to_input0(wdata, ir, packed) __ir_to_input((wdata), (ir), (packed), \
- ABS_HAT0X, ABS_HAT0Y)
-#define ir_to_input1(wdata, ir, packed) __ir_to_input((wdata), (ir), (packed), \
- ABS_HAT1X, ABS_HAT1Y)
-#define ir_to_input2(wdata, ir, packed) __ir_to_input((wdata), (ir), (packed), \
- ABS_HAT2X, ABS_HAT2Y)
-#define ir_to_input3(wdata, ir, packed) __ir_to_input((wdata), (ir), (packed), \
- ABS_HAT3X, ABS_HAT3Y)
+static void handler_accel(struct wiimote_data *wdata, const __u8 *payload)
+{
+ const __u8 *iter, *mods;
+ const struct wiimod_ops *ops;
+
+ ops = wiimod_ext_table[wdata->state.exttype];
+ if (ops->in_accel) {
+ ops->in_accel(wdata, payload);
+ return;
+ }
-static void __ir_to_input(struct wiimote_data *wdata, const __u8 *ir,
- bool packed, __u8 xid, __u8 yid)
+ mods = wiimote_devtype_mods[wdata->state.devtype];
+ for (iter = mods; *iter != WIIMOD_NULL; ++iter) {
+ ops = wiimod_table[*iter];
+ if (ops->in_accel) {
+ ops->in_accel(wdata, payload);
+ break;
+ }
+ }
+}
+
+static bool valid_ext_handler(const struct wiimod_ops *ops, size_t len)
{
- __u16 x, y;
+ if (!ops->in_ext)
+ return false;
+ if ((ops->flags & WIIMOD_FLAG_EXT8) && len < 8)
+ return false;
+ if ((ops->flags & WIIMOD_FLAG_EXT16) && len < 16)
+ return false;
+
+ return true;
+}
- if (!(wdata->state.flags & WIIPROTO_FLAGS_IR))
+static void handler_ext(struct wiimote_data *wdata, const __u8 *payload,
+ size_t len)
+{
+ static const __u8 invalid[21] = { 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0xff,
+ 0xff };
+ const __u8 *iter, *mods;
+ const struct wiimod_ops *ops;
+ bool is_mp;
+
+ if (len > 21)
+ len = 21;
+ if (len < 6 || !memcmp(payload, invalid, len))
return;
- /*
- * Basic IR data is encoded into 3 bytes. The first two bytes are the
- * lower 8 bit of the X/Y data, the 3rd byte contains the upper 2 bits
- * of both.
- * If data is packed, then the 3rd byte is put first and slightly
- * reordered. This allows to interleave packed and non-packed data to
- * have two IR sets in 5 bytes instead of 6.
- * The resulting 10bit X/Y values are passed to the ABS_HATXY input dev.
- */
+ /* if MP is active, track MP slot hotplugging */
+ if (wdata->state.flags & WIIPROTO_FLAG_MP_ACTIVE) {
+ /* this bit is set for invalid events (eg. during hotplug) */
+ if (payload[5] & 0x01)
+ return;
+
+ if (payload[4] & 0x01) {
+ if (!(wdata->state.flags & WIIPROTO_FLAG_MP_PLUGGED)) {
+ hid_dbg(wdata->hdev, "MP hotplug: 1\n");
+ wdata->state.flags |= WIIPROTO_FLAG_MP_PLUGGED;
+ __wiimote_schedule(wdata);
+ }
+ } else {
+ if (wdata->state.flags & WIIPROTO_FLAG_MP_PLUGGED) {
+ hid_dbg(wdata->hdev, "MP hotplug: 0\n");
+ wdata->state.flags &= ~WIIPROTO_FLAG_MP_PLUGGED;
+ wdata->state.flags &= ~WIIPROTO_FLAG_EXT_ACTIVE;
+ __wiimote_schedule(wdata);
+ }
+ }
- if (packed) {
- x = ir[1] | ((ir[0] & 0x03) << 8);
- y = ir[2] | ((ir[0] & 0x0c) << 6);
+ /* detect MP data that is sent interleaved with EXT data */
+ is_mp = payload[5] & 0x02;
} else {
- x = ir[0] | ((ir[2] & 0x30) << 4);
- y = ir[1] | ((ir[2] & 0xc0) << 2);
+ is_mp = false;
+ }
+
+ /* ignore EXT events if no extension is active */
+ if (!(wdata->state.flags & WIIPROTO_FLAG_EXT_ACTIVE) && !is_mp)
+ return;
+
+ /* try forwarding to extension handler, first */
+ ops = wiimod_ext_table[wdata->state.exttype];
+ if (is_mp && ops->in_mp) {
+ ops->in_mp(wdata, payload);
+ return;
+ } else if (!is_mp && valid_ext_handler(ops, len)) {
+ ops->in_ext(wdata, payload);
+ return;
+ }
+
+ /* try forwarding to MP handler */
+ ops = &wiimod_mp;
+ if (is_mp && ops->in_mp) {
+ ops->in_mp(wdata, payload);
+ return;
+ } else if (!is_mp && valid_ext_handler(ops, len)) {
+ ops->in_ext(wdata, payload);
+ return;
}
- input_report_abs(wdata->ir, xid, x);
- input_report_abs(wdata->ir, yid, y);
+ /* try forwarding to loaded modules */
+ mods = wiimote_devtype_mods[wdata->state.devtype];
+ for (iter = mods; *iter != WIIMOD_NULL; ++iter) {
+ ops = wiimod_table[*iter];
+ if (is_mp && ops->in_mp) {
+ ops->in_mp(wdata, payload);
+ return;
+ } else if (!is_mp && valid_ext_handler(ops, len)) {
+ ops->in_ext(wdata, payload);
+ return;
+ }
+ }
+}
+
+#define ir_to_input0(wdata, ir, packed) handler_ir((wdata), (ir), (packed), 0)
+#define ir_to_input1(wdata, ir, packed) handler_ir((wdata), (ir), (packed), 1)
+#define ir_to_input2(wdata, ir, packed) handler_ir((wdata), (ir), (packed), 2)
+#define ir_to_input3(wdata, ir, packed) handler_ir((wdata), (ir), (packed), 3)
+
+static void handler_ir(struct wiimote_data *wdata, const __u8 *payload,
+ bool packed, unsigned int id)
+{
+ const __u8 *iter, *mods;
+ const struct wiimod_ops *ops;
+
+ ops = wiimod_ext_table[wdata->state.exttype];
+ if (ops->in_ir) {
+ ops->in_ir(wdata, payload, packed, id);
+ return;
+ }
+
+ mods = wiimote_devtype_mods[wdata->state.devtype];
+ for (iter = mods; *iter != WIIMOD_NULL; ++iter) {
+ ops = wiimod_table[*iter];
+ if (ops->in_ir) {
+ ops->in_ir(wdata, payload, packed, id);
+ break;
+ }
+ }
}
/* reduced status report with "BB BB" key data only */
@@ -804,12 +1417,27 @@ static void handler_status(struct wiimote_data *wdata, const __u8 *payload)
{
handler_status_K(wdata, payload);
- wiiext_event(wdata, payload[2] & 0x02);
+ /* update extension status */
+ if (payload[2] & 0x02) {
+ if (!(wdata->state.flags & WIIPROTO_FLAG_EXT_PLUGGED)) {
+ hid_dbg(wdata->hdev, "EXT hotplug: 1\n");
+ wdata->state.flags |= WIIPROTO_FLAG_EXT_PLUGGED;
+ __wiimote_schedule(wdata);
+ }
+ } else {
+ if (wdata->state.flags & WIIPROTO_FLAG_EXT_PLUGGED) {
+ hid_dbg(wdata->hdev, "EXT hotplug: 0\n");
+ wdata->state.flags &= ~WIIPROTO_FLAG_EXT_PLUGGED;
+ wdata->state.flags &= ~WIIPROTO_FLAG_MP_PLUGGED;
+ wdata->state.flags &= ~WIIPROTO_FLAG_EXT_ACTIVE;
+ wdata->state.flags &= ~WIIPROTO_FLAG_MP_ACTIVE;
+ __wiimote_schedule(wdata);
+ }
+ }
- if (wiimote_cmd_pending(wdata, WIIPROTO_REQ_SREQ, 0)) {
- wdata->state.cmd_battery = payload[5];
+ wdata->state.cmd_battery = payload[5];
+ if (wiimote_cmd_pending(wdata, WIIPROTO_REQ_SREQ, 0))
wiimote_cmd_complete(wdata);
- }
}
/* reduced generic report with "BB BB" key data only */
@@ -864,7 +1492,7 @@ static void handler_drm_KA(struct wiimote_data *wdata, const __u8 *payload)
static void handler_drm_KE(struct wiimote_data *wdata, const __u8 *payload)
{
handler_keys(wdata, payload);
- wiiext_handle(wdata, &payload[2]);
+ handler_ext(wdata, &payload[2], 8);
}
static void handler_drm_KAI(struct wiimote_data *wdata, const __u8 *payload)
@@ -875,13 +1503,12 @@ static void handler_drm_KAI(struct wiimote_data *wdata, const __u8 *payload)
ir_to_input1(wdata, &payload[8], false);
ir_to_input2(wdata, &payload[11], false);
ir_to_input3(wdata, &payload[14], false);
- input_sync(wdata->ir);
}
static void handler_drm_KEE(struct wiimote_data *wdata, const __u8 *payload)
{
handler_keys(wdata, payload);
- wiiext_handle(wdata, &payload[2]);
+ handler_ext(wdata, &payload[2], 19);
}
static void handler_drm_KIE(struct wiimote_data *wdata, const __u8 *payload)
@@ -891,15 +1518,14 @@ static void handler_drm_KIE(struct wiimote_data *wdata, const __u8 *payload)
ir_to_input1(wdata, &payload[4], true);
ir_to_input2(wdata, &payload[7], false);
ir_to_input3(wdata, &payload[9], true);
- input_sync(wdata->ir);
- wiiext_handle(wdata, &payload[12]);
+ handler_ext(wdata, &payload[12], 9);
}
static void handler_drm_KAE(struct wiimote_data *wdata, const __u8 *payload)
{
handler_keys(wdata, payload);
handler_accel(wdata, payload);
- wiiext_handle(wdata, &payload[5]);
+ handler_ext(wdata, &payload[5], 16);
}
static void handler_drm_KAIE(struct wiimote_data *wdata, const __u8 *payload)
@@ -910,13 +1536,12 @@ static void handler_drm_KAIE(struct wiimote_data *wdata, const __u8 *payload)
ir_to_input1(wdata, &payload[7], true);
ir_to_input2(wdata, &payload[10], false);
ir_to_input3(wdata, &payload[12], true);
- input_sync(wdata->ir);
- wiiext_handle(wdata, &payload[15]);
+ handler_ext(wdata, &payload[15], 6);
}
static void handler_drm_E(struct wiimote_data *wdata, const __u8 *payload)
{
- wiiext_handle(wdata, payload);
+ handler_ext(wdata, payload, 21);
}
static void handler_drm_SKAI1(struct wiimote_data *wdata, const __u8 *payload)
@@ -929,7 +1554,6 @@ static void handler_drm_SKAI1(struct wiimote_data *wdata, const __u8 *payload)
ir_to_input0(wdata, &payload[3], false);
ir_to_input1(wdata, &payload[12], false);
- input_sync(wdata->ir);
}
static void handler_drm_SKAI2(struct wiimote_data *wdata, const __u8 *payload)
@@ -950,7 +1574,6 @@ static void handler_drm_SKAI2(struct wiimote_data *wdata, const __u8 *payload)
ir_to_input2(wdata, &payload[3], false);
ir_to_input3(wdata, &payload[12], false);
- input_sync(wdata->ir);
}
struct wiiproto_handler {
@@ -1017,177 +1640,136 @@ static int wiimote_hid_event(struct hid_device *hdev, struct hid_report *report,
return 0;
}
-static void wiimote_leds_destroy(struct wiimote_data *wdata)
+static ssize_t wiimote_ext_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
{
- int i;
- struct led_classdev *led;
-
- for (i = 0; i < 4; ++i) {
- if (wdata->leds[i]) {
- led = wdata->leds[i];
- wdata->leds[i] = NULL;
- led_classdev_unregister(led);
- kfree(led);
- }
+ struct wiimote_data *wdata = dev_to_wii(dev);
+ __u8 type;
+ unsigned long flags;
+
+ spin_lock_irqsave(&wdata->state.lock, flags);
+ type = wdata->state.exttype;
+ spin_unlock_irqrestore(&wdata->state.lock, flags);
+
+ switch (type) {
+ case WIIMOTE_EXT_NONE:
+ return sprintf(buf, "none\n");
+ case WIIMOTE_EXT_NUNCHUK:
+ return sprintf(buf, "nunchuk\n");
+ case WIIMOTE_EXT_CLASSIC_CONTROLLER:
+ return sprintf(buf, "classic\n");
+ case WIIMOTE_EXT_BALANCE_BOARD:
+ return sprintf(buf, "balanceboard\n");
+ case WIIMOTE_EXT_PRO_CONTROLLER:
+ return sprintf(buf, "procontroller\n");
+ case WIIMOTE_EXT_UNKNOWN:
+ /* fallthrough */
+ default:
+ return sprintf(buf, "unknown\n");
}
}
-static int wiimote_leds_create(struct wiimote_data *wdata)
+static ssize_t wiimote_ext_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
{
- int i, ret;
- struct device *dev = &wdata->hdev->dev;
- size_t namesz = strlen(dev_name(dev)) + 9;
- struct led_classdev *led;
- char *name;
+ struct wiimote_data *wdata = dev_to_wii(dev);
- for (i = 0; i < 4; ++i) {
- led = kzalloc(sizeof(struct led_classdev) + namesz, GFP_KERNEL);
- if (!led) {
- ret = -ENOMEM;
- goto err;
- }
- name = (void*)&led[1];
- snprintf(name, namesz, "%s:blue:p%d", dev_name(dev), i);
- led->name = name;
- led->brightness = 0;
- led->max_brightness = 1;
- led->brightness_get = wiimote_leds_get;
- led->brightness_set = wiimote_leds_set;
-
- ret = led_classdev_register(dev, led);
- if (ret) {
- kfree(led);
- goto err;
- }
- wdata->leds[i] = led;
+ if (!strcmp(buf, "scan")) {
+ wiimote_schedule(wdata);
+ } else {
+ return -EINVAL;
}
- return 0;
+ return strnlen(buf, PAGE_SIZE);
+}
-err:
- wiimote_leds_destroy(wdata);
- return ret;
+static DEVICE_ATTR(extension, S_IRUGO | S_IWUSR | S_IWGRP, wiimote_ext_show,
+ wiimote_ext_store);
+
+static ssize_t wiimote_dev_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct wiimote_data *wdata = dev_to_wii(dev);
+ __u8 type;
+ unsigned long flags;
+
+ spin_lock_irqsave(&wdata->state.lock, flags);
+ type = wdata->state.devtype;
+ spin_unlock_irqrestore(&wdata->state.lock, flags);
+
+ switch (type) {
+ case WIIMOTE_DEV_GENERIC:
+ return sprintf(buf, "generic\n");
+ case WIIMOTE_DEV_GEN10:
+ return sprintf(buf, "gen10\n");
+ case WIIMOTE_DEV_GEN20:
+ return sprintf(buf, "gen20\n");
+ case WIIMOTE_DEV_BALANCE_BOARD:
+ return sprintf(buf, "balanceboard\n");
+ case WIIMOTE_DEV_PRO_CONTROLLER:
+ return sprintf(buf, "procontroller\n");
+ case WIIMOTE_DEV_PENDING:
+ return sprintf(buf, "pending\n");
+ case WIIMOTE_DEV_UNKNOWN:
+ /* fallthrough */
+ default:
+ return sprintf(buf, "unknown\n");
+ }
}
+static DEVICE_ATTR(devtype, S_IRUGO, wiimote_dev_show, NULL);
+
static struct wiimote_data *wiimote_create(struct hid_device *hdev)
{
struct wiimote_data *wdata;
- int i;
wdata = kzalloc(sizeof(*wdata), GFP_KERNEL);
if (!wdata)
return NULL;
- wdata->input = input_allocate_device();
- if (!wdata->input)
- goto err;
-
wdata->hdev = hdev;
hid_set_drvdata(hdev, wdata);
- input_set_drvdata(wdata->input, wdata);
- wdata->input->open = wiimote_input_open;
- wdata->input->close = wiimote_input_close;
- wdata->input->dev.parent = &wdata->hdev->dev;
- wdata->input->id.bustype = wdata->hdev->bus;
- wdata->input->id.vendor = wdata->hdev->vendor;
- wdata->input->id.product = wdata->hdev->product;
- wdata->input->id.version = wdata->hdev->version;
- wdata->input->name = WIIMOTE_NAME;
-
- set_bit(EV_KEY, wdata->input->evbit);
- for (i = 0; i < WIIPROTO_KEY_COUNT; ++i)
- set_bit(wiiproto_keymap[i], wdata->input->keybit);
-
- set_bit(FF_RUMBLE, wdata->input->ffbit);
- if (input_ff_create_memless(wdata->input, NULL, wiimote_ff_play))
- goto err_input;
-
- wdata->accel = input_allocate_device();
- if (!wdata->accel)
- goto err_input;
-
- input_set_drvdata(wdata->accel, wdata);
- wdata->accel->open = wiimote_accel_open;
- wdata->accel->close = wiimote_accel_close;
- wdata->accel->dev.parent = &wdata->hdev->dev;
- wdata->accel->id.bustype = wdata->hdev->bus;
- wdata->accel->id.vendor = wdata->hdev->vendor;
- wdata->accel->id.product = wdata->hdev->product;
- wdata->accel->id.version = wdata->hdev->version;
- wdata->accel->name = WIIMOTE_NAME " Accelerometer";
-
- set_bit(EV_ABS, wdata->accel->evbit);
- set_bit(ABS_RX, wdata->accel->absbit);
- set_bit(ABS_RY, wdata->accel->absbit);
- set_bit(ABS_RZ, wdata->accel->absbit);
- input_set_abs_params(wdata->accel, ABS_RX, -500, 500, 2, 4);
- input_set_abs_params(wdata->accel, ABS_RY, -500, 500, 2, 4);
- input_set_abs_params(wdata->accel, ABS_RZ, -500, 500, 2, 4);
-
- wdata->ir = input_allocate_device();
- if (!wdata->ir)
- goto err_ir;
-
- input_set_drvdata(wdata->ir, wdata);
- wdata->ir->open = wiimote_ir_open;
- wdata->ir->close = wiimote_ir_close;
- wdata->ir->dev.parent = &wdata->hdev->dev;
- wdata->ir->id.bustype = wdata->hdev->bus;
- wdata->ir->id.vendor = wdata->hdev->vendor;
- wdata->ir->id.product = wdata->hdev->product;
- wdata->ir->id.version = wdata->hdev->version;
- wdata->ir->name = WIIMOTE_NAME " IR";
-
- set_bit(EV_ABS, wdata->ir->evbit);
- set_bit(ABS_HAT0X, wdata->ir->absbit);
- set_bit(ABS_HAT0Y, wdata->ir->absbit);
- set_bit(ABS_HAT1X, wdata->ir->absbit);
- set_bit(ABS_HAT1Y, wdata->ir->absbit);
- set_bit(ABS_HAT2X, wdata->ir->absbit);
- set_bit(ABS_HAT2Y, wdata->ir->absbit);
- set_bit(ABS_HAT3X, wdata->ir->absbit);
- set_bit(ABS_HAT3Y, wdata->ir->absbit);
- input_set_abs_params(wdata->ir, ABS_HAT0X, 0, 1023, 2, 4);
- input_set_abs_params(wdata->ir, ABS_HAT0Y, 0, 767, 2, 4);
- input_set_abs_params(wdata->ir, ABS_HAT1X, 0, 1023, 2, 4);
- input_set_abs_params(wdata->ir, ABS_HAT1Y, 0, 767, 2, 4);
- input_set_abs_params(wdata->ir, ABS_HAT2X, 0, 1023, 2, 4);
- input_set_abs_params(wdata->ir, ABS_HAT2Y, 0, 767, 2, 4);
- input_set_abs_params(wdata->ir, ABS_HAT3X, 0, 1023, 2, 4);
- input_set_abs_params(wdata->ir, ABS_HAT3Y, 0, 767, 2, 4);
-
- spin_lock_init(&wdata->qlock);
- INIT_WORK(&wdata->worker, wiimote_worker);
+ spin_lock_init(&wdata->queue.lock);
+ INIT_WORK(&wdata->queue.worker, wiimote_queue_worker);
spin_lock_init(&wdata->state.lock);
init_completion(&wdata->state.ready);
mutex_init(&wdata->state.sync);
wdata->state.drm = WIIPROTO_REQ_DRM_K;
+ wdata->state.cmd_battery = 0xff;
- return wdata;
+ INIT_WORK(&wdata->init_worker, wiimote_init_worker);
+ setup_timer(&wdata->timer, wiimote_init_timeout, (long)wdata);
-err_ir:
- input_free_device(wdata->accel);
-err_input:
- input_free_device(wdata->input);
-err:
- kfree(wdata);
- return NULL;
+ return wdata;
}
static void wiimote_destroy(struct wiimote_data *wdata)
{
+ unsigned long flags;
+
wiidebug_deinit(wdata);
- wiiext_deinit(wdata);
- wiimote_leds_destroy(wdata);
-
- power_supply_unregister(&wdata->battery);
- kfree(wdata->battery.name);
- input_unregister_device(wdata->accel);
- input_unregister_device(wdata->ir);
- input_unregister_device(wdata->input);
- cancel_work_sync(&wdata->worker);
+
+ /* prevent init_worker from being scheduled again */
+ spin_lock_irqsave(&wdata->state.lock, flags);
+ wdata->state.flags |= WIIPROTO_FLAG_EXITING;
+ spin_unlock_irqrestore(&wdata->state.lock, flags);
+
+ cancel_work_sync(&wdata->init_worker);
+ del_timer_sync(&wdata->timer);
+
+ device_remove_file(&wdata->hdev->dev, &dev_attr_devtype);
+ device_remove_file(&wdata->hdev->dev, &dev_attr_extension);
+
+ wiimote_mp_unload(wdata);
+ wiimote_ext_unload(wdata);
+ wiimote_modules_unload(wdata);
+ cancel_work_sync(&wdata->queue.worker);
+ hid_hw_close(wdata->hdev);
hid_hw_stop(wdata->hdev);
kfree(wdata);
@@ -1219,62 +1801,32 @@ static int wiimote_hid_probe(struct hid_device *hdev,
goto err;
}
- ret = input_register_device(wdata->accel);
+ ret = hid_hw_open(hdev);
if (ret) {
- hid_err(hdev, "Cannot register input device\n");
+ hid_err(hdev, "cannot start hardware I/O\n");
goto err_stop;
}
- ret = input_register_device(wdata->ir);
- if (ret) {
- hid_err(hdev, "Cannot register input device\n");
- goto err_ir;
- }
-
- ret = input_register_device(wdata->input);
+ ret = device_create_file(&hdev->dev, &dev_attr_extension);
if (ret) {
- hid_err(hdev, "Cannot register input device\n");
- goto err_input;
- }
-
- wdata->battery.properties = wiimote_battery_props;
- wdata->battery.num_properties = ARRAY_SIZE(wiimote_battery_props);
- wdata->battery.get_property = wiimote_battery_get_property;
- wdata->battery.type = POWER_SUPPLY_TYPE_BATTERY;
- wdata->battery.use_for_apm = 0;
- wdata->battery.name = kasprintf(GFP_KERNEL, "wiimote_battery_%s",
- wdata->hdev->uniq);
- if (!wdata->battery.name) {
- ret = -ENOMEM;
- goto err_battery_name;
+ hid_err(hdev, "cannot create sysfs attribute\n");
+ goto err_close;
}
- ret = power_supply_register(&wdata->hdev->dev, &wdata->battery);
+ ret = device_create_file(&hdev->dev, &dev_attr_devtype);
if (ret) {
- hid_err(hdev, "Cannot register battery device\n");
- goto err_battery;
+ hid_err(hdev, "cannot create sysfs attribute\n");
+ goto err_ext;
}
- power_supply_powers(&wdata->battery, &hdev->dev);
-
- ret = wiimote_leds_create(wdata);
- if (ret)
- goto err_free;
-
- ret = wiiext_init(wdata);
- if (ret)
- goto err_free;
-
ret = wiidebug_init(wdata);
if (ret)
goto err_free;
hid_info(hdev, "New device registered\n");
- /* by default set led1 after device initialization */
- spin_lock_irq(&wdata->state.lock);
- wiiproto_req_leds(wdata, WIIPROTO_FLAG_LED1);
- spin_unlock_irq(&wdata->state.lock);
+ /* schedule device detection */
+ wiimote_schedule(wdata);
return 0;
@@ -1282,23 +1834,15 @@ err_free:
wiimote_destroy(wdata);
return ret;
-err_battery:
- kfree(wdata->battery.name);
-err_battery_name:
- input_unregister_device(wdata->input);
- wdata->input = NULL;
-err_input:
- input_unregister_device(wdata->ir);
- wdata->ir = NULL;
-err_ir:
- input_unregister_device(wdata->accel);
- wdata->accel = NULL;
+err_ext:
+ device_remove_file(&wdata->hdev->dev, &dev_attr_extension);
+err_close:
+ hid_hw_close(hdev);
err_stop:
hid_hw_stop(hdev);
err:
input_free_device(wdata->ir);
input_free_device(wdata->accel);
- input_free_device(wdata->input);
kfree(wdata);
return ret;
}
@@ -1331,4 +1875,4 @@ module_hid_driver(wiimote_hid_driver);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("David Herrmann <dh.herrmann@gmail.com>");
-MODULE_DESCRIPTION(WIIMOTE_NAME " Device Driver");
+MODULE_DESCRIPTION("Driver for Nintendo Wii / Wii U peripherals");
diff --git a/drivers/hid/hid-wiimote-debug.c b/drivers/hid/hid-wiimote-debug.c
index 90124ffaa2a5..c13fb5bd79e8 100644
--- a/drivers/hid/hid-wiimote-debug.c
+++ b/drivers/hid/hid-wiimote-debug.c
@@ -1,6 +1,6 @@
/*
- * Debug support for HID Nintendo Wiimote devices
- * Copyright (c) 2011 David Herrmann
+ * Debug support for HID Nintendo Wii / Wii U peripherals
+ * Copyright (c) 2011-2013 David Herrmann <dh.herrmann@gmail.com>
*/
/*
@@ -127,7 +127,8 @@ static int wiidebug_drm_open(struct inode *i, struct file *f)
static ssize_t wiidebug_drm_write(struct file *f, const char __user *u,
size_t s, loff_t *off)
{
- struct wiimote_debug *dbg = f->private_data;
+ struct seq_file *sf = f->private_data;
+ struct wiimote_debug *dbg = sf->private;
unsigned long flags;
char buf[16];
ssize_t len;
@@ -140,7 +141,7 @@ static ssize_t wiidebug_drm_write(struct file *f, const char __user *u,
if (copy_from_user(buf, u, len))
return -EFAULT;
- buf[15] = 0;
+ buf[len] = 0;
for (i = 0; i < WIIPROTO_REQ_MAX; ++i) {
if (!wiidebug_drmmap[i])
@@ -150,10 +151,13 @@ static ssize_t wiidebug_drm_write(struct file *f, const char __user *u,
}
if (i == WIIPROTO_REQ_MAX)
- i = simple_strtoul(buf, NULL, 10);
+ i = simple_strtoul(buf, NULL, 16);
spin_lock_irqsave(&dbg->wdata->state.lock, flags);
+ dbg->wdata->state.flags &= ~WIIPROTO_FLAG_DRM_LOCKED;
wiiproto_req_drm(dbg->wdata, (__u8) i);
+ if (i != WIIPROTO_REQ_NULL)
+ dbg->wdata->state.flags |= WIIPROTO_FLAG_DRM_LOCKED;
spin_unlock_irqrestore(&dbg->wdata->state.lock, flags);
return len;
diff --git a/drivers/hid/hid-wiimote-ext.c b/drivers/hid/hid-wiimote-ext.c
deleted file mode 100644
index 0472191d4a72..000000000000
--- a/drivers/hid/hid-wiimote-ext.c
+++ /dev/null
@@ -1,849 +0,0 @@
-/*
- * HID driver for Nintendo Wiimote extension devices
- * Copyright (c) 2011 David Herrmann
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the Free
- * Software Foundation; either version 2 of the License, or (at your option)
- * any later version.
- */
-
-#include <linux/atomic.h>
-#include <linux/module.h>
-#include <linux/spinlock.h>
-#include <linux/workqueue.h>
-#include "hid-wiimote.h"
-
-struct wiimote_ext {
- struct wiimote_data *wdata;
- struct work_struct worker;
- struct input_dev *input;
- struct input_dev *mp_input;
-
- atomic_t opened;
- atomic_t mp_opened;
- bool plugged;
- bool mp_plugged;
- bool motionp;
- __u8 ext_type;
- __u16 calib[4][3];
-};
-
-enum wiiext_type {
- WIIEXT_NONE, /* placeholder */
- WIIEXT_CLASSIC, /* Nintendo classic controller */
- WIIEXT_NUNCHUCK, /* Nintendo nunchuck controller */
- WIIEXT_BALANCE_BOARD, /* Nintendo balance board controller */
-};
-
-enum wiiext_keys {
- WIIEXT_KEY_C,
- WIIEXT_KEY_Z,
- WIIEXT_KEY_A,
- WIIEXT_KEY_B,
- WIIEXT_KEY_X,
- WIIEXT_KEY_Y,
- WIIEXT_KEY_ZL,
- WIIEXT_KEY_ZR,
- WIIEXT_KEY_PLUS,
- WIIEXT_KEY_MINUS,
- WIIEXT_KEY_HOME,
- WIIEXT_KEY_LEFT,
- WIIEXT_KEY_RIGHT,
- WIIEXT_KEY_UP,
- WIIEXT_KEY_DOWN,
- WIIEXT_KEY_LT,
- WIIEXT_KEY_RT,
- WIIEXT_KEY_COUNT
-};
-
-static __u16 wiiext_keymap[] = {
- BTN_C, /* WIIEXT_KEY_C */
- BTN_Z, /* WIIEXT_KEY_Z */
- BTN_A, /* WIIEXT_KEY_A */
- BTN_B, /* WIIEXT_KEY_B */
- BTN_X, /* WIIEXT_KEY_X */
- BTN_Y, /* WIIEXT_KEY_Y */
- BTN_TL2, /* WIIEXT_KEY_ZL */
- BTN_TR2, /* WIIEXT_KEY_ZR */
- KEY_NEXT, /* WIIEXT_KEY_PLUS */
- KEY_PREVIOUS, /* WIIEXT_KEY_MINUS */
- BTN_MODE, /* WIIEXT_KEY_HOME */
- KEY_LEFT, /* WIIEXT_KEY_LEFT */
- KEY_RIGHT, /* WIIEXT_KEY_RIGHT */
- KEY_UP, /* WIIEXT_KEY_UP */
- KEY_DOWN, /* WIIEXT_KEY_DOWN */
- BTN_TL, /* WIIEXT_KEY_LT */
- BTN_TR, /* WIIEXT_KEY_RT */
-};
-
-/* disable all extensions */
-static void ext_disable(struct wiimote_ext *ext)
-{
- unsigned long flags;
- __u8 wmem = 0x55;
-
- if (!wiimote_cmd_acquire(ext->wdata)) {
- wiimote_cmd_write(ext->wdata, 0xa400f0, &wmem, sizeof(wmem));
- wiimote_cmd_release(ext->wdata);
- }
-
- spin_lock_irqsave(&ext->wdata->state.lock, flags);
- ext->motionp = false;
- ext->ext_type = WIIEXT_NONE;
- wiiproto_req_drm(ext->wdata, WIIPROTO_REQ_NULL);
- spin_unlock_irqrestore(&ext->wdata->state.lock, flags);
-}
-
-static bool motionp_read(struct wiimote_ext *ext)
-{
- __u8 rmem[2], wmem;
- ssize_t ret;
- bool avail = false;
-
- if (!atomic_read(&ext->mp_opened))
- return false;
-
- if (wiimote_cmd_acquire(ext->wdata))
- return false;
-
- /* initialize motion plus */
- wmem = 0x55;
- ret = wiimote_cmd_write(ext->wdata, 0xa600f0, &wmem, sizeof(wmem));
- if (ret)
- goto error;
-
- /* read motion plus ID */
- ret = wiimote_cmd_read(ext->wdata, 0xa600fe, rmem, 2);
- if (ret == 2 || rmem[1] == 0x5)
- avail = true;
-
-error:
- wiimote_cmd_release(ext->wdata);
- return avail;
-}
-
-static __u8 ext_read(struct wiimote_ext *ext)
-{
- ssize_t ret;
- __u8 buf[24], i, j, offs = 0;
- __u8 rmem[2], wmem;
- __u8 type = WIIEXT_NONE;
-
- if (!ext->plugged || !atomic_read(&ext->opened))
- return WIIEXT_NONE;
-
- if (wiimote_cmd_acquire(ext->wdata))
- return WIIEXT_NONE;
-
- /* initialize extension */
- wmem = 0x55;
- ret = wiimote_cmd_write(ext->wdata, 0xa400f0, &wmem, sizeof(wmem));
- if (!ret) {
- /* disable encryption */
- wmem = 0x0;
- wiimote_cmd_write(ext->wdata, 0xa400fb, &wmem, sizeof(wmem));
- }
-
- /* read extension ID */
- ret = wiimote_cmd_read(ext->wdata, 0xa400fe, rmem, 2);
- if (ret == 2) {
- if (rmem[0] == 0 && rmem[1] == 0)
- type = WIIEXT_NUNCHUCK;
- else if (rmem[0] == 0x01 && rmem[1] == 0x01)
- type = WIIEXT_CLASSIC;
- else if (rmem[0] == 0x04 && rmem[1] == 0x02)
- type = WIIEXT_BALANCE_BOARD;
- }
-
- /* get balance board calibration data */
- if (type == WIIEXT_BALANCE_BOARD) {
- ret = wiimote_cmd_read(ext->wdata, 0xa40024, buf, 12);
- ret += wiimote_cmd_read(ext->wdata, 0xa40024 + 12,
- buf + 12, 12);
-
- if (ret != 24) {
- type = WIIEXT_NONE;
- } else {
- for (i = 0; i < 3; i++) {
- for (j = 0; j < 4; j++) {
- ext->calib[j][i] = buf[offs];
- ext->calib[j][i] <<= 8;
- ext->calib[j][i] |= buf[offs + 1];
- offs += 2;
- }
- }
- }
- }
-
- wiimote_cmd_release(ext->wdata);
-
- return type;
-}
-
-static void ext_enable(struct wiimote_ext *ext, bool motionp, __u8 ext_type)
-{
- unsigned long flags;
- __u8 wmem;
- int ret;
-
- if (motionp) {
- if (wiimote_cmd_acquire(ext->wdata))
- return;
-
- if (ext_type == WIIEXT_CLASSIC)
- wmem = 0x07;
- else if (ext_type == WIIEXT_NUNCHUCK)
- wmem = 0x05;
- else
- wmem = 0x04;
-
- ret = wiimote_cmd_write(ext->wdata, 0xa600fe, &wmem, sizeof(wmem));
- wiimote_cmd_release(ext->wdata);
- if (ret)
- return;
- }
-
- spin_lock_irqsave(&ext->wdata->state.lock, flags);
- ext->motionp = motionp;
- ext->ext_type = ext_type;
- wiiproto_req_drm(ext->wdata, WIIPROTO_REQ_NULL);
- spin_unlock_irqrestore(&ext->wdata->state.lock, flags);
-}
-
-static void wiiext_worker(struct work_struct *work)
-{
- struct wiimote_ext *ext = container_of(work, struct wiimote_ext,
- worker);
- bool motionp;
- __u8 ext_type;
-
- ext_disable(ext);
- motionp = motionp_read(ext);
- ext_type = ext_read(ext);
- ext_enable(ext, motionp, ext_type);
-}
-
-/* schedule work only once, otherwise mark for reschedule */
-static void wiiext_schedule(struct wiimote_ext *ext)
-{
- schedule_work(&ext->worker);
-}
-
-/*
- * Reacts on extension port events
- * Whenever the driver gets an event from the wiimote that an extension has been
- * plugged or unplugged, this funtion shall be called. It checks what extensions
- * are connected and initializes and activates them.
- * This can be called in atomic context. The initialization is done in a
- * separate worker thread. The state.lock spinlock must be held by the caller.
- */
-void wiiext_event(struct wiimote_data *wdata, bool plugged)
-{
- if (!wdata->ext)
- return;
-
- if (wdata->ext->plugged == plugged)
- return;
-
- wdata->ext->plugged = plugged;
-
- if (!plugged)
- wdata->ext->mp_plugged = false;
-
- /*
- * We need to call wiiext_schedule(wdata->ext) here, however, the
- * extension initialization logic is not fully understood and so
- * automatic initialization is not supported, yet.
- */
-}
-
-/*
- * Returns true if the current DRM mode should contain extension data and false
- * if there is no interest in extension data.
- * All supported extensions send 6 byte extension data so any DRM that contains
- * extension bytes is fine.
- * The caller must hold the state.lock spinlock.
- */
-bool wiiext_active(struct wiimote_data *wdata)
-{
- if (!wdata->ext)
- return false;
-
- return wdata->ext->motionp || wdata->ext->ext_type;
-}
-
-static void handler_motionp(struct wiimote_ext *ext, const __u8 *payload)
-{
- __s32 x, y, z;
- bool plugged;
-
- /* | 8 7 6 5 4 3 | 2 | 1 |
- * -----+------------------------------+-----+-----+
- * 1 | Yaw Speed <7:0> |
- * 2 | Roll Speed <7:0> |
- * 3 | Pitch Speed <7:0> |
- * -----+------------------------------+-----+-----+
- * 4 | Yaw Speed <13:8> | Yaw |Pitch|
- * -----+------------------------------+-----+-----+
- * 5 | Roll Speed <13:8> |Roll | Ext |
- * -----+------------------------------+-----+-----+
- * 6 | Pitch Speed <13:8> | 1 | 0 |
- * -----+------------------------------+-----+-----+
- * The single bits Yaw, Roll, Pitch in the lower right corner specify
- * whether the wiimote is rotating fast (0) or slow (1). Speed for slow
- * roation is 440 deg/s and for fast rotation 2000 deg/s. To get a
- * linear scale we multiply by 2000/440 = ~4.5454 which is 18 for fast
- * and 9 for slow.
- * If the wiimote is not rotating the sensor reports 2^13 = 8192.
- * Ext specifies whether an extension is connected to the motionp.
- */
-
- x = payload[0];
- y = payload[1];
- z = payload[2];
-
- x |= (((__u16)payload[3]) << 6) & 0xff00;
- y |= (((__u16)payload[4]) << 6) & 0xff00;
- z |= (((__u16)payload[5]) << 6) & 0xff00;
-
- x -= 8192;
- y -= 8192;
- z -= 8192;
-
- if (!(payload[3] & 0x02))
- x *= 18;
- else
- x *= 9;
- if (!(payload[4] & 0x02))
- y *= 18;
- else
- y *= 9;
- if (!(payload[3] & 0x01))
- z *= 18;
- else
- z *= 9;
-
- input_report_abs(ext->mp_input, ABS_RX, x);
- input_report_abs(ext->mp_input, ABS_RY, y);
- input_report_abs(ext->mp_input, ABS_RZ, z);
- input_sync(ext->mp_input);
-
- plugged = payload[5] & 0x01;
- if (plugged != ext->mp_plugged)
- ext->mp_plugged = plugged;
-}
-
-static void handler_nunchuck(struct wiimote_ext *ext, const __u8 *payload)
-{
- __s16 x, y, z, bx, by;
-
- /* Byte | 8 7 | 6 5 | 4 3 | 2 | 1 |
- * -----+----------+---------+---------+----+-----+
- * 1 | Button X <7:0> |
- * 2 | Button Y <7:0> |
- * -----+----------+---------+---------+----+-----+
- * 3 | Speed X <9:2> |
- * 4 | Speed Y <9:2> |
- * 5 | Speed Z <9:2> |
- * -----+----------+---------+---------+----+-----+
- * 6 | Z <1:0> | Y <1:0> | X <1:0> | BC | BZ |
- * -----+----------+---------+---------+----+-----+
- * Button X/Y is the analog stick. Speed X, Y and Z are the
- * accelerometer data in the same format as the wiimote's accelerometer.
- * The 6th byte contains the LSBs of the accelerometer data.
- * BC and BZ are the C and Z buttons: 0 means pressed
- *
- * If reported interleaved with motionp, then the layout changes. The
- * 5th and 6th byte changes to:
- * -----+-----------------------------------+-----+
- * 5 | Speed Z <9:3> | EXT |
- * -----+--------+-----+-----+----+----+----+-----+
- * 6 |Z <2:1> |Y <1>|X <1>| BC | BZ | 0 | 0 |
- * -----+--------+-----+-----+----+----+----+-----+
- * All three accelerometer values lose their LSB. The other data is
- * still available but slightly moved.
- *
- * Center data for button values is 128. Center value for accelerometer
- * values it 512 / 0x200
- */
-
- bx = payload[0];
- by = payload[1];
- bx -= 128;
- by -= 128;
-
- x = payload[2] << 2;
- y = payload[3] << 2;
- z = payload[4] << 2;
-
- if (ext->motionp) {
- x |= (payload[5] >> 3) & 0x02;
- y |= (payload[5] >> 4) & 0x02;
- z &= ~0x4;
- z |= (payload[5] >> 5) & 0x06;
- } else {
- x |= (payload[5] >> 2) & 0x03;
- y |= (payload[5] >> 4) & 0x03;
- z |= (payload[5] >> 6) & 0x03;
- }
-
- x -= 0x200;
- y -= 0x200;
- z -= 0x200;
-
- input_report_abs(ext->input, ABS_HAT0X, bx);
- input_report_abs(ext->input, ABS_HAT0Y, by);
-
- input_report_abs(ext->input, ABS_RX, x);
- input_report_abs(ext->input, ABS_RY, y);
- input_report_abs(ext->input, ABS_RZ, z);
-
- if (ext->motionp) {
- input_report_key(ext->input,
- wiiext_keymap[WIIEXT_KEY_Z], !(payload[5] & 0x04));
- input_report_key(ext->input,
- wiiext_keymap[WIIEXT_KEY_C], !(payload[5] & 0x08));
- } else {
- input_report_key(ext->input,
- wiiext_keymap[WIIEXT_KEY_Z], !(payload[5] & 0x01));
- input_report_key(ext->input,
- wiiext_keymap[WIIEXT_KEY_C], !(payload[5] & 0x02));
- }
-
- input_sync(ext->input);
-}
-
-static void handler_classic(struct wiimote_ext *ext, const __u8 *payload)
-{
- __s8 rx, ry, lx, ly, lt, rt;
-
- /* Byte | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 |
- * -----+-----+-----+-----+-----+-----+-----+-----+-----+
- * 1 | RX <5:4> | LX <5:0> |
- * 2 | RX <3:2> | LY <5:0> |
- * -----+-----+-----+-----+-----------------------------+
- * 3 |RX<1>| LT <5:4> | RY <5:1> |
- * -----+-----+-----------+-----------------------------+
- * 4 | LT <3:1> | RT <5:1> |
- * -----+-----+-----+-----+-----+-----+-----+-----+-----+
- * 5 | BDR | BDD | BLT | B- | BH | B+ | BRT | 1 |
- * -----+-----+-----+-----+-----+-----+-----+-----+-----+
- * 6 | BZL | BB | BY | BA | BX | BZR | BDL | BDU |
- * -----+-----+-----+-----+-----+-----+-----+-----+-----+
- * All buttons are 0 if pressed
- * RX and RY are right analog stick
- * LX and LY are left analog stick
- * LT is left trigger, RT is right trigger
- * BLT is 0 if left trigger is fully pressed
- * BRT is 0 if right trigger is fully pressed
- * BDR, BDD, BDL, BDU form the D-Pad with right, down, left, up buttons
- * BZL is left Z button and BZR is right Z button
- * B-, BH, B+ are +, HOME and - buttons
- * BB, BY, BA, BX are A, B, X, Y buttons
- * LSB of RX, RY, LT, and RT are not transmitted and always 0.
- *
- * With motionp enabled it changes slightly to this:
- * Byte | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 |
- * -----+-----+-----+-----+-----+-----+-----+-----+-----+
- * 1 | RX <4:3> | LX <5:1> | BDU |
- * 2 | RX <2:1> | LY <5:1> | BDL |
- * -----+-----+-----+-----+-----------------------+-----+
- * 3 |RX<0>| LT <4:3> | RY <4:0> |
- * -----+-----+-----------+-----------------------------+
- * 4 | LT <2:0> | RT <4:0> |
- * -----+-----+-----+-----+-----+-----+-----+-----+-----+
- * 5 | BDR | BDD | BLT | B- | BH | B+ | BRT | EXT |
- * -----+-----+-----+-----+-----+-----+-----+-----+-----+
- * 6 | BZL | BB | BY | BA | BX | BZR | 0 | 0 |
- * -----+-----+-----+-----+-----+-----+-----+-----+-----+
- * Only the LSBs of LX and LY are lost. BDU and BDL are moved, the rest
- * is the same as before.
- */
-
- if (ext->motionp) {
- lx = payload[0] & 0x3e;
- ly = payload[0] & 0x3e;
- } else {
- lx = payload[0] & 0x3f;
- ly = payload[0] & 0x3f;
- }
-
- rx = (payload[0] >> 3) & 0x14;
- rx |= (payload[1] >> 5) & 0x06;
- rx |= (payload[2] >> 7) & 0x01;
- ry = payload[2] & 0x1f;
-
- rt = payload[3] & 0x1f;
- lt = (payload[2] >> 2) & 0x18;
- lt |= (payload[3] >> 5) & 0x07;
-
- rx <<= 1;
- ry <<= 1;
- rt <<= 1;
- lt <<= 1;
-
- input_report_abs(ext->input, ABS_HAT1X, lx - 0x20);
- input_report_abs(ext->input, ABS_HAT1Y, ly - 0x20);
- input_report_abs(ext->input, ABS_HAT2X, rx - 0x20);
- input_report_abs(ext->input, ABS_HAT2Y, ry - 0x20);
- input_report_abs(ext->input, ABS_HAT3X, rt - 0x20);
- input_report_abs(ext->input, ABS_HAT3Y, lt - 0x20);
-
- input_report_key(ext->input, wiiext_keymap[WIIEXT_KEY_RIGHT],
- !!(payload[4] & 0x80));
- input_report_key(ext->input, wiiext_keymap[WIIEXT_KEY_DOWN],
- !!(payload[4] & 0x40));
- input_report_key(ext->input, wiiext_keymap[WIIEXT_KEY_LT],
- !!(payload[4] & 0x20));
- input_report_key(ext->input, wiiext_keymap[WIIEXT_KEY_MINUS],
- !!(payload[4] & 0x10));
- input_report_key(ext->input, wiiext_keymap[WIIEXT_KEY_HOME],
- !!(payload[4] & 0x08));
- input_report_key(ext->input, wiiext_keymap[WIIEXT_KEY_PLUS],
- !!(payload[4] & 0x04));
- input_report_key(ext->input, wiiext_keymap[WIIEXT_KEY_RT],
- !!(payload[4] & 0x02));
- input_report_key(ext->input, wiiext_keymap[WIIEXT_KEY_ZL],
- !!(payload[5] & 0x80));
- input_report_key(ext->input, wiiext_keymap[WIIEXT_KEY_B],
- !!(payload[5] & 0x40));
- input_report_key(ext->input, wiiext_keymap[WIIEXT_KEY_Y],
- !!(payload[5] & 0x20));
- input_report_key(ext->input, wiiext_keymap[WIIEXT_KEY_A],
- !!(payload[5] & 0x10));
- input_report_key(ext->input, wiiext_keymap[WIIEXT_KEY_X],
- !!(payload[5] & 0x08));
- input_report_key(ext->input, wiiext_keymap[WIIEXT_KEY_ZR],
- !!(payload[5] & 0x04));
-
- if (ext->motionp) {
- input_report_key(ext->input, wiiext_keymap[WIIEXT_KEY_UP],
- !!(payload[0] & 0x01));
- input_report_key(ext->input, wiiext_keymap[WIIEXT_KEY_LEFT],
- !!(payload[1] & 0x01));
- } else {
- input_report_key(ext->input, wiiext_keymap[WIIEXT_KEY_UP],
- !!(payload[5] & 0x01));
- input_report_key(ext->input, wiiext_keymap[WIIEXT_KEY_LEFT],
- !!(payload[5] & 0x02));
- }
-
- input_sync(ext->input);
-}
-
-static void handler_balance_board(struct wiimote_ext *ext, const __u8 *payload)
-{
- __s32 val[4], tmp;
- unsigned int i;
-
- /* Byte | 8 7 6 5 4 3 2 1 |
- * -----+--------------------------+
- * 1 | Top Right <15:8> |
- * 2 | Top Right <7:0> |
- * -----+--------------------------+
- * 3 | Bottom Right <15:8> |
- * 4 | Bottom Right <7:0> |
- * -----+--------------------------+
- * 5 | Top Left <15:8> |
- * 6 | Top Left <7:0> |
- * -----+--------------------------+
- * 7 | Bottom Left <15:8> |
- * 8 | Bottom Left <7:0> |
- * -----+--------------------------+
- *
- * These values represent the weight-measurements of the Wii-balance
- * board with 16bit precision.
- *
- * The balance-board is never reported interleaved with motionp.
- */
-
- val[0] = payload[0];
- val[0] <<= 8;
- val[0] |= payload[1];
-
- val[1] = payload[2];
- val[1] <<= 8;
- val[1] |= payload[3];
-
- val[2] = payload[4];
- val[2] <<= 8;
- val[2] |= payload[5];
-
- val[3] = payload[6];
- val[3] <<= 8;
- val[3] |= payload[7];
-
- /* apply calibration data */
- for (i = 0; i < 4; i++) {
- if (val[i] < ext->calib[i][1]) {
- tmp = val[i] - ext->calib[i][0];
- tmp *= 1700;
- tmp /= ext->calib[i][1] - ext->calib[i][0];
- } else {
- tmp = val[i] - ext->calib[i][1];
- tmp *= 1700;
- tmp /= ext->calib[i][2] - ext->calib[i][1];
- tmp += 1700;
- }
- val[i] = tmp;
- }
-
- input_report_abs(ext->input, ABS_HAT0X, val[0]);
- input_report_abs(ext->input, ABS_HAT0Y, val[1]);
- input_report_abs(ext->input, ABS_HAT1X, val[2]);
- input_report_abs(ext->input, ABS_HAT1Y, val[3]);
-
- input_sync(ext->input);
-}
-
-/* call this with state.lock spinlock held */
-void wiiext_handle(struct wiimote_data *wdata, const __u8 *payload)
-{
- struct wiimote_ext *ext = wdata->ext;
-
- if (!ext)
- return;
-
- if (ext->motionp && (payload[5] & 0x02)) {
- handler_motionp(ext, payload);
- } else if (ext->ext_type == WIIEXT_NUNCHUCK) {
- handler_nunchuck(ext, payload);
- } else if (ext->ext_type == WIIEXT_CLASSIC) {
- handler_classic(ext, payload);
- } else if (ext->ext_type == WIIEXT_BALANCE_BOARD) {
- handler_balance_board(ext, payload);
- }
-}
-
-static ssize_t wiiext_show(struct device *dev, struct device_attribute *attr,
- char *buf)
-{
- struct wiimote_data *wdata = dev_to_wii(dev);
- __u8 type = WIIEXT_NONE;
- bool motionp = false;
- unsigned long flags;
-
- spin_lock_irqsave(&wdata->state.lock, flags);
- if (wdata->ext) {
- motionp = wdata->ext->motionp;
- type = wdata->ext->ext_type;
- }
- spin_unlock_irqrestore(&wdata->state.lock, flags);
-
- if (type == WIIEXT_NUNCHUCK) {
- if (motionp)
- return sprintf(buf, "motionp+nunchuck\n");
- else
- return sprintf(buf, "nunchuck\n");
- } else if (type == WIIEXT_CLASSIC) {
- if (motionp)
- return sprintf(buf, "motionp+classic\n");
- else
- return sprintf(buf, "classic\n");
- } else if (type == WIIEXT_BALANCE_BOARD) {
- if (motionp)
- return sprintf(buf, "motionp+balanceboard\n");
- else
- return sprintf(buf, "balanceboard\n");
- } else {
- if (motionp)
- return sprintf(buf, "motionp\n");
- else
- return sprintf(buf, "none\n");
- }
-}
-
-static DEVICE_ATTR(extension, S_IRUGO, wiiext_show, NULL);
-
-static int wiiext_input_open(struct input_dev *dev)
-{
- struct wiimote_ext *ext = input_get_drvdata(dev);
- int ret;
-
- ret = hid_hw_open(ext->wdata->hdev);
- if (ret)
- return ret;
-
- atomic_inc(&ext->opened);
- wiiext_schedule(ext);
-
- return 0;
-}
-
-static void wiiext_input_close(struct input_dev *dev)
-{
- struct wiimote_ext *ext = input_get_drvdata(dev);
-
- atomic_dec(&ext->opened);
- wiiext_schedule(ext);
- hid_hw_close(ext->wdata->hdev);
-}
-
-static int wiiext_mp_open(struct input_dev *dev)
-{
- struct wiimote_ext *ext = input_get_drvdata(dev);
- int ret;
-
- ret = hid_hw_open(ext->wdata->hdev);
- if (ret)
- return ret;
-
- atomic_inc(&ext->mp_opened);
- wiiext_schedule(ext);
-
- return 0;
-}
-
-static void wiiext_mp_close(struct input_dev *dev)
-{
- struct wiimote_ext *ext = input_get_drvdata(dev);
-
- atomic_dec(&ext->mp_opened);
- wiiext_schedule(ext);
- hid_hw_close(ext->wdata->hdev);
-}
-
-/* Initializes the extension driver of a wiimote */
-int wiiext_init(struct wiimote_data *wdata)
-{
- struct wiimote_ext *ext;
- unsigned long flags;
- int ret, i;
-
- ext = kzalloc(sizeof(*ext), GFP_KERNEL);
- if (!ext)
- return -ENOMEM;
-
- ext->wdata = wdata;
- INIT_WORK(&ext->worker, wiiext_worker);
-
- ext->input = input_allocate_device();
- if (!ext->input) {
- ret = -ENOMEM;
- goto err_input;
- }
-
- input_set_drvdata(ext->input, ext);
- ext->input->open = wiiext_input_open;
- ext->input->close = wiiext_input_close;
- ext->input->dev.parent = &wdata->hdev->dev;
- ext->input->id.bustype = wdata->hdev->bus;
- ext->input->id.vendor = wdata->hdev->vendor;
- ext->input->id.product = wdata->hdev->product;
- ext->input->id.version = wdata->hdev->version;
- ext->input->name = WIIMOTE_NAME " Extension";
-
- set_bit(EV_KEY, ext->input->evbit);
- for (i = 0; i < WIIEXT_KEY_COUNT; ++i)
- set_bit(wiiext_keymap[i], ext->input->keybit);
-
- set_bit(EV_ABS, ext->input->evbit);
- set_bit(ABS_HAT0X, ext->input->absbit);
- set_bit(ABS_HAT0Y, ext->input->absbit);
- set_bit(ABS_HAT1X, ext->input->absbit);
- set_bit(ABS_HAT1Y, ext->input->absbit);
- set_bit(ABS_HAT2X, ext->input->absbit);
- set_bit(ABS_HAT2Y, ext->input->absbit);
- set_bit(ABS_HAT3X, ext->input->absbit);
- set_bit(ABS_HAT3Y, ext->input->absbit);
- input_set_abs_params(ext->input, ABS_HAT0X, -120, 120, 2, 4);
- input_set_abs_params(ext->input, ABS_HAT0Y, -120, 120, 2, 4);
- input_set_abs_params(ext->input, ABS_HAT1X, -30, 30, 1, 1);
- input_set_abs_params(ext->input, ABS_HAT1Y, -30, 30, 1, 1);
- input_set_abs_params(ext->input, ABS_HAT2X, -30, 30, 1, 1);
- input_set_abs_params(ext->input, ABS_HAT2Y, -30, 30, 1, 1);
- input_set_abs_params(ext->input, ABS_HAT3X, -30, 30, 1, 1);
- input_set_abs_params(ext->input, ABS_HAT3Y, -30, 30, 1, 1);
- set_bit(ABS_RX, ext->input->absbit);
- set_bit(ABS_RY, ext->input->absbit);
- set_bit(ABS_RZ, ext->input->absbit);
- input_set_abs_params(ext->input, ABS_RX, -500, 500, 2, 4);
- input_set_abs_params(ext->input, ABS_RY, -500, 500, 2, 4);
- input_set_abs_params(ext->input, ABS_RZ, -500, 500, 2, 4);
-
- ret = input_register_device(ext->input);
- if (ret) {
- input_free_device(ext->input);
- goto err_input;
- }
-
- ext->mp_input = input_allocate_device();
- if (!ext->mp_input) {
- ret = -ENOMEM;
- goto err_mp;
- }
-
- input_set_drvdata(ext->mp_input, ext);
- ext->mp_input->open = wiiext_mp_open;
- ext->mp_input->close = wiiext_mp_close;
- ext->mp_input->dev.parent = &wdata->hdev->dev;
- ext->mp_input->id.bustype = wdata->hdev->bus;
- ext->mp_input->id.vendor = wdata->hdev->vendor;
- ext->mp_input->id.product = wdata->hdev->product;
- ext->mp_input->id.version = wdata->hdev->version;
- ext->mp_input->name = WIIMOTE_NAME " Motion+";
-
- set_bit(EV_ABS, ext->mp_input->evbit);
- set_bit(ABS_RX, ext->mp_input->absbit);
- set_bit(ABS_RY, ext->mp_input->absbit);
- set_bit(ABS_RZ, ext->mp_input->absbit);
- input_set_abs_params(ext->mp_input, ABS_RX, -160000, 160000, 4, 8);
- input_set_abs_params(ext->mp_input, ABS_RY, -160000, 160000, 4, 8);
- input_set_abs_params(ext->mp_input, ABS_RZ, -160000, 160000, 4, 8);
-
- ret = input_register_device(ext->mp_input);
- if (ret) {
- input_free_device(ext->mp_input);
- goto err_mp;
- }
-
- ret = device_create_file(&wdata->hdev->dev, &dev_attr_extension);
- if (ret)
- goto err_dev;
-
- spin_lock_irqsave(&wdata->state.lock, flags);
- wdata->ext = ext;
- spin_unlock_irqrestore(&wdata->state.lock, flags);
-
- return 0;
-
-err_dev:
- input_unregister_device(ext->mp_input);
-err_mp:
- input_unregister_device(ext->input);
-err_input:
- kfree(ext);
- return ret;
-}
-
-/* Deinitializes the extension driver of a wiimote */
-void wiiext_deinit(struct wiimote_data *wdata)
-{
- struct wiimote_ext *ext = wdata->ext;
- unsigned long flags;
-
- if (!ext)
- return;
-
- /*
- * We first unset wdata->ext to avoid further input from the wiimote
- * core. The worker thread does not access this pointer so it is not
- * affected by this.
- * We kill the worker after this so it does not get respawned during
- * deinitialization.
- */
-
- spin_lock_irqsave(&wdata->state.lock, flags);
- wdata->ext = NULL;
- spin_unlock_irqrestore(&wdata->state.lock, flags);
-
- device_remove_file(&wdata->hdev->dev, &dev_attr_extension);
- input_unregister_device(ext->mp_input);
- input_unregister_device(ext->input);
-
- cancel_work_sync(&ext->worker);
- kfree(ext);
-}
diff --git a/drivers/hid/hid-wiimote-modules.c b/drivers/hid/hid-wiimote-modules.c
new file mode 100644
index 000000000000..2e7d644dba18
--- /dev/null
+++ b/drivers/hid/hid-wiimote-modules.c
@@ -0,0 +1,2086 @@
+/*
+ * Device Modules for Nintendo Wii / Wii U HID Driver
+ * Copyright (c) 2011-2013 David Herrmann <dh.herrmann@gmail.com>
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+/*
+ * Wiimote Modules
+ * Nintendo devices provide different peripherals and many new devices lack
+ * initial features like the IR camera. Therefore, each peripheral device is
+ * implemented as an independent module and we probe on each device only the
+ * modules for the hardware that really is available.
+ *
+ * Module registration is sequential. Unregistration is done in reverse order.
+ * After device detection, the needed modules are loaded. Users can trigger
+ * re-detection which causes all modules to be unloaded and then reload the
+ * modules for the new detected device.
+ *
+ * wdata->input is a shared input device. It is always initialized prior to
+ * module registration. If at least one registered module is marked as
+ * WIIMOD_FLAG_INPUT, then the input device will get registered after all
+ * modules were registered.
+ * Please note that it is unregistered _before_ the "remove" callbacks are
+ * called. This guarantees that no input interaction is done, anymore. However,
+ * the wiimote core keeps a reference to the input device so it is freed only
+ * after all modules were removed. It is safe to send events to unregistered
+ * input devices.
+ */
+
+#include <linux/device.h>
+#include <linux/hid.h>
+#include <linux/input.h>
+#include <linux/spinlock.h>
+#include "hid-wiimote.h"
+
+/*
+ * Keys
+ * The initial Wii Remote provided a bunch of buttons that are reported as
+ * part of the core protocol. Many later devices dropped these and report
+ * invalid data in the core button reports. Load this only on devices which
+ * correctly send button reports.
+ * It uses the shared input device.
+ */
+
+static const __u16 wiimod_keys_map[] = {
+ KEY_LEFT, /* WIIPROTO_KEY_LEFT */
+ KEY_RIGHT, /* WIIPROTO_KEY_RIGHT */
+ KEY_UP, /* WIIPROTO_KEY_UP */
+ KEY_DOWN, /* WIIPROTO_KEY_DOWN */
+ KEY_NEXT, /* WIIPROTO_KEY_PLUS */
+ KEY_PREVIOUS, /* WIIPROTO_KEY_MINUS */
+ BTN_1, /* WIIPROTO_KEY_ONE */
+ BTN_2, /* WIIPROTO_KEY_TWO */
+ BTN_A, /* WIIPROTO_KEY_A */
+ BTN_B, /* WIIPROTO_KEY_B */
+ BTN_MODE, /* WIIPROTO_KEY_HOME */
+};
+
+static void wiimod_keys_in_keys(struct wiimote_data *wdata, const __u8 *keys)
+{
+ input_report_key(wdata->input, wiimod_keys_map[WIIPROTO_KEY_LEFT],
+ !!(keys[0] & 0x01));
+ input_report_key(wdata->input, wiimod_keys_map[WIIPROTO_KEY_RIGHT],
+ !!(keys[0] & 0x02));
+ input_report_key(wdata->input, wiimod_keys_map[WIIPROTO_KEY_DOWN],
+ !!(keys[0] & 0x04));
+ input_report_key(wdata->input, wiimod_keys_map[WIIPROTO_KEY_UP],
+ !!(keys[0] & 0x08));
+ input_report_key(wdata->input, wiimod_keys_map[WIIPROTO_KEY_PLUS],
+ !!(keys[0] & 0x10));
+ input_report_key(wdata->input, wiimod_keys_map[WIIPROTO_KEY_TWO],
+ !!(keys[1] & 0x01));
+ input_report_key(wdata->input, wiimod_keys_map[WIIPROTO_KEY_ONE],
+ !!(keys[1] & 0x02));
+ input_report_key(wdata->input, wiimod_keys_map[WIIPROTO_KEY_B],
+ !!(keys[1] & 0x04));
+ input_report_key(wdata->input, wiimod_keys_map[WIIPROTO_KEY_A],
+ !!(keys[1] & 0x08));
+ input_report_key(wdata->input, wiimod_keys_map[WIIPROTO_KEY_MINUS],
+ !!(keys[1] & 0x10));
+ input_report_key(wdata->input, wiimod_keys_map[WIIPROTO_KEY_HOME],
+ !!(keys[1] & 0x80));
+ input_sync(wdata->input);
+}
+
+static int wiimod_keys_probe(const struct wiimod_ops *ops,
+ struct wiimote_data *wdata)
+{
+ unsigned int i;
+
+ set_bit(EV_KEY, wdata->input->evbit);
+ for (i = 0; i < WIIPROTO_KEY_COUNT; ++i)
+ set_bit(wiimod_keys_map[i], wdata->input->keybit);
+
+ return 0;
+}
+
+static const struct wiimod_ops wiimod_keys = {
+ .flags = WIIMOD_FLAG_INPUT,
+ .arg = 0,
+ .probe = wiimod_keys_probe,
+ .remove = NULL,
+ .in_keys = wiimod_keys_in_keys,
+};
+
+/*
+ * Rumble
+ * Nearly all devices provide a rumble feature. A small motor for
+ * force-feedback effects. We provide an FF_RUMBLE memless ff device on the
+ * shared input device if this module is loaded.
+ * The rumble motor is controlled via a flag on almost every output report so
+ * the wiimote core handles the rumble flag. But if a device doesn't provide
+ * the rumble motor, this flag shouldn't be set.
+ */
+
+static int wiimod_rumble_play(struct input_dev *dev, void *data,
+ struct ff_effect *eff)
+{
+ struct wiimote_data *wdata = input_get_drvdata(dev);
+ __u8 value;
+ unsigned long flags;
+
+ /*
+ * The wiimote supports only a single rumble motor so if any magnitude
+ * is set to non-zero then we start the rumble motor. If both are set to
+ * zero, we stop the rumble motor.
+ */
+
+ if (eff->u.rumble.strong_magnitude || eff->u.rumble.weak_magnitude)
+ value = 1;
+ else
+ value = 0;
+
+ spin_lock_irqsave(&wdata->state.lock, flags);
+ wiiproto_req_rumble(wdata, value);
+ spin_unlock_irqrestore(&wdata->state.lock, flags);
+
+ return 0;
+}
+
+static int wiimod_rumble_probe(const struct wiimod_ops *ops,
+ struct wiimote_data *wdata)
+{
+ set_bit(FF_RUMBLE, wdata->input->ffbit);
+ if (input_ff_create_memless(wdata->input, NULL, wiimod_rumble_play))
+ return -ENOMEM;
+
+ return 0;
+}
+
+static void wiimod_rumble_remove(const struct wiimod_ops *ops,
+ struct wiimote_data *wdata)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&wdata->state.lock, flags);
+ wiiproto_req_rumble(wdata, 0);
+ spin_unlock_irqrestore(&wdata->state.lock, flags);
+}
+
+static const struct wiimod_ops wiimod_rumble = {
+ .flags = WIIMOD_FLAG_INPUT,
+ .arg = 0,
+ .probe = wiimod_rumble_probe,
+ .remove = wiimod_rumble_remove,
+};
+
+/*
+ * Battery
+ * 1 byte of battery capacity information is sent along every protocol status
+ * report. The wiimote core caches it but we try to update it on every
+ * user-space request.
+ * This is supported by nearly every device so it's almost always enabled.
+ */
+
+static enum power_supply_property wiimod_battery_props[] = {
+ POWER_SUPPLY_PROP_CAPACITY,
+ POWER_SUPPLY_PROP_SCOPE,
+};
+
+static int wiimod_battery_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct wiimote_data *wdata = container_of(psy, struct wiimote_data,
+ battery);
+ int ret = 0, state;
+ unsigned long flags;
+
+ if (psp == POWER_SUPPLY_PROP_SCOPE) {
+ val->intval = POWER_SUPPLY_SCOPE_DEVICE;
+ return 0;
+ } else if (psp != POWER_SUPPLY_PROP_CAPACITY) {
+ return -EINVAL;
+ }
+
+ ret = wiimote_cmd_acquire(wdata);
+ if (ret)
+ return ret;
+
+ spin_lock_irqsave(&wdata->state.lock, flags);
+ wiimote_cmd_set(wdata, WIIPROTO_REQ_SREQ, 0);
+ wiiproto_req_status(wdata);
+ spin_unlock_irqrestore(&wdata->state.lock, flags);
+
+ wiimote_cmd_wait(wdata);
+ wiimote_cmd_release(wdata);
+
+ spin_lock_irqsave(&wdata->state.lock, flags);
+ state = wdata->state.cmd_battery;
+ spin_unlock_irqrestore(&wdata->state.lock, flags);
+
+ val->intval = state * 100 / 255;
+ return ret;
+}
+
+static int wiimod_battery_probe(const struct wiimod_ops *ops,
+ struct wiimote_data *wdata)
+{
+ int ret;
+
+ wdata->battery.properties = wiimod_battery_props;
+ wdata->battery.num_properties = ARRAY_SIZE(wiimod_battery_props);
+ wdata->battery.get_property = wiimod_battery_get_property;
+ wdata->battery.type = POWER_SUPPLY_TYPE_BATTERY;
+ wdata->battery.use_for_apm = 0;
+ wdata->battery.name = kasprintf(GFP_KERNEL, "wiimote_battery_%s",
+ wdata->hdev->uniq);
+ if (!wdata->battery.name)
+ return -ENOMEM;
+
+ ret = power_supply_register(&wdata->hdev->dev, &wdata->battery);
+ if (ret) {
+ hid_err(wdata->hdev, "cannot register battery device\n");
+ goto err_free;
+ }
+
+ power_supply_powers(&wdata->battery, &wdata->hdev->dev);
+ return 0;
+
+err_free:
+ kfree(wdata->battery.name);
+ wdata->battery.name = NULL;
+ return ret;
+}
+
+static void wiimod_battery_remove(const struct wiimod_ops *ops,
+ struct wiimote_data *wdata)
+{
+ if (!wdata->battery.name)
+ return;
+
+ power_supply_unregister(&wdata->battery);
+ kfree(wdata->battery.name);
+ wdata->battery.name = NULL;
+}
+
+static const struct wiimod_ops wiimod_battery = {
+ .flags = 0,
+ .arg = 0,
+ .probe = wiimod_battery_probe,
+ .remove = wiimod_battery_remove,
+};
+
+/*
+ * LED
+ * 0 to 4 player LEDs are supported by devices. The "arg" field of the
+ * wiimod_ops structure specifies which LED this module controls. This allows
+ * to register a limited number of LEDs.
+ * State is managed by wiimote core.
+ */
+
+static enum led_brightness wiimod_led_get(struct led_classdev *led_dev)
+{
+ struct wiimote_data *wdata;
+ struct device *dev = led_dev->dev->parent;
+ int i;
+ unsigned long flags;
+ bool value = false;
+
+ wdata = hid_get_drvdata(container_of(dev, struct hid_device, dev));
+
+ for (i = 0; i < 4; ++i) {
+ if (wdata->leds[i] == led_dev) {
+ spin_lock_irqsave(&wdata->state.lock, flags);
+ value = wdata->state.flags & WIIPROTO_FLAG_LED(i + 1);
+ spin_unlock_irqrestore(&wdata->state.lock, flags);
+ break;
+ }
+ }
+
+ return value ? LED_FULL : LED_OFF;
+}
+
+static void wiimod_led_set(struct led_classdev *led_dev,
+ enum led_brightness value)
+{
+ struct wiimote_data *wdata;
+ struct device *dev = led_dev->dev->parent;
+ int i;
+ unsigned long flags;
+ __u8 state, flag;
+
+ wdata = hid_get_drvdata(container_of(dev, struct hid_device, dev));
+
+ for (i = 0; i < 4; ++i) {
+ if (wdata->leds[i] == led_dev) {
+ flag = WIIPROTO_FLAG_LED(i + 1);
+ spin_lock_irqsave(&wdata->state.lock, flags);
+ state = wdata->state.flags;
+ if (value == LED_OFF)
+ wiiproto_req_leds(wdata, state & ~flag);
+ else
+ wiiproto_req_leds(wdata, state | flag);
+ spin_unlock_irqrestore(&wdata->state.lock, flags);
+ break;
+ }
+ }
+}
+
+static int wiimod_led_probe(const struct wiimod_ops *ops,
+ struct wiimote_data *wdata)
+{
+ struct device *dev = &wdata->hdev->dev;
+ size_t namesz = strlen(dev_name(dev)) + 9;
+ struct led_classdev *led;
+ unsigned long flags;
+ char *name;
+ int ret;
+
+ led = kzalloc(sizeof(struct led_classdev) + namesz, GFP_KERNEL);
+ if (!led)
+ return -ENOMEM;
+
+ name = (void*)&led[1];
+ snprintf(name, namesz, "%s:blue:p%lu", dev_name(dev), ops->arg);
+ led->name = name;
+ led->brightness = 0;
+ led->max_brightness = 1;
+ led->brightness_get = wiimod_led_get;
+ led->brightness_set = wiimod_led_set;
+
+ wdata->leds[ops->arg] = led;
+ ret = led_classdev_register(dev, led);
+ if (ret)
+ goto err_free;
+
+ /* enable LED1 to stop initial LED-blinking */
+ if (ops->arg == 0) {
+ spin_lock_irqsave(&wdata->state.lock, flags);
+ wiiproto_req_leds(wdata, WIIPROTO_FLAG_LED1);
+ spin_unlock_irqrestore(&wdata->state.lock, flags);
+ }
+
+ return 0;
+
+err_free:
+ wdata->leds[ops->arg] = NULL;
+ kfree(led);
+ return ret;
+}
+
+static void wiimod_led_remove(const struct wiimod_ops *ops,
+ struct wiimote_data *wdata)
+{
+ if (!wdata->leds[ops->arg])
+ return;
+
+ led_classdev_unregister(wdata->leds[ops->arg]);
+ kfree(wdata->leds[ops->arg]);
+ wdata->leds[ops->arg] = NULL;
+}
+
+static const struct wiimod_ops wiimod_leds[4] = {
+ {
+ .flags = 0,
+ .arg = 0,
+ .probe = wiimod_led_probe,
+ .remove = wiimod_led_remove,
+ },
+ {
+ .flags = 0,
+ .arg = 1,
+ .probe = wiimod_led_probe,
+ .remove = wiimod_led_remove,
+ },
+ {
+ .flags = 0,
+ .arg = 2,
+ .probe = wiimod_led_probe,
+ .remove = wiimod_led_remove,
+ },
+ {
+ .flags = 0,
+ .arg = 3,
+ .probe = wiimod_led_probe,
+ .remove = wiimod_led_remove,
+ },
+};
+
+/*
+ * Accelerometer
+ * 3 axis accelerometer data is part of nearly all DRMs. If not supported by a
+ * device, it's mostly cleared to 0. This module parses this data and provides
+ * it via a separate input device.
+ */
+
+static void wiimod_accel_in_accel(struct wiimote_data *wdata,
+ const __u8 *accel)
+{
+ __u16 x, y, z;
+
+ if (!(wdata->state.flags & WIIPROTO_FLAG_ACCEL))
+ return;
+
+ /*
+ * payload is: BB BB XX YY ZZ
+ * Accelerometer data is encoded into 3 10bit values. XX, YY and ZZ
+ * contain the upper 8 bits of each value. The lower 2 bits are
+ * contained in the buttons data BB BB.
+ * Bits 6 and 7 of the first buttons byte BB is the lower 2 bits of the
+ * X accel value. Bit 5 of the second buttons byte is the 2nd bit of Y
+ * accel value and bit 6 is the second bit of the Z value.
+ * The first bit of Y and Z values is not available and always set to 0.
+ * 0x200 is returned on no movement.
+ */
+
+ x = accel[2] << 2;
+ y = accel[3] << 2;
+ z = accel[4] << 2;
+
+ x |= (accel[0] >> 5) & 0x3;
+ y |= (accel[1] >> 4) & 0x2;
+ z |= (accel[1] >> 5) & 0x2;
+
+ input_report_abs(wdata->accel, ABS_RX, x - 0x200);
+ input_report_abs(wdata->accel, ABS_RY, y - 0x200);
+ input_report_abs(wdata->accel, ABS_RZ, z - 0x200);
+ input_sync(wdata->accel);
+}
+
+static int wiimod_accel_open(struct input_dev *dev)
+{
+ struct wiimote_data *wdata = input_get_drvdata(dev);
+ unsigned long flags;
+
+ spin_lock_irqsave(&wdata->state.lock, flags);
+ wiiproto_req_accel(wdata, true);
+ spin_unlock_irqrestore(&wdata->state.lock, flags);
+
+ return 0;
+}
+
+static void wiimod_accel_close(struct input_dev *dev)
+{
+ struct wiimote_data *wdata = input_get_drvdata(dev);
+ unsigned long flags;
+
+ spin_lock_irqsave(&wdata->state.lock, flags);
+ wiiproto_req_accel(wdata, false);
+ spin_unlock_irqrestore(&wdata->state.lock, flags);
+}
+
+static int wiimod_accel_probe(const struct wiimod_ops *ops,
+ struct wiimote_data *wdata)
+{
+ int ret;
+
+ wdata->accel = input_allocate_device();
+ if (!wdata->accel)
+ return -ENOMEM;
+
+ input_set_drvdata(wdata->accel, wdata);
+ wdata->accel->open = wiimod_accel_open;
+ wdata->accel->close = wiimod_accel_close;
+ wdata->accel->dev.parent = &wdata->hdev->dev;
+ wdata->accel->id.bustype = wdata->hdev->bus;
+ wdata->accel->id.vendor = wdata->hdev->vendor;
+ wdata->accel->id.product = wdata->hdev->product;
+ wdata->accel->id.version = wdata->hdev->version;
+ wdata->accel->name = WIIMOTE_NAME " Accelerometer";
+
+ set_bit(EV_ABS, wdata->accel->evbit);
+ set_bit(ABS_RX, wdata->accel->absbit);
+ set_bit(ABS_RY, wdata->accel->absbit);
+ set_bit(ABS_RZ, wdata->accel->absbit);
+ input_set_abs_params(wdata->accel, ABS_RX, -500, 500, 2, 4);
+ input_set_abs_params(wdata->accel, ABS_RY, -500, 500, 2, 4);
+ input_set_abs_params(wdata->accel, ABS_RZ, -500, 500, 2, 4);
+
+ ret = input_register_device(wdata->accel);
+ if (ret) {
+ hid_err(wdata->hdev, "cannot register input device\n");
+ goto err_free;
+ }
+
+ return 0;
+
+err_free:
+ input_free_device(wdata->accel);
+ wdata->accel = NULL;
+ return ret;
+}
+
+static void wiimod_accel_remove(const struct wiimod_ops *ops,
+ struct wiimote_data *wdata)
+{
+ if (!wdata->accel)
+ return;
+
+ input_unregister_device(wdata->accel);
+ wdata->accel = NULL;
+}
+
+static const struct wiimod_ops wiimod_accel = {
+ .flags = 0,
+ .arg = 0,
+ .probe = wiimod_accel_probe,
+ .remove = wiimod_accel_remove,
+ .in_accel = wiimod_accel_in_accel,
+};
+
+/*
+ * IR Cam
+ * Up to 4 IR sources can be tracked by a normal Wii Remote. The IR cam needs
+ * to be initialized with a fairly complex procedure and consumes a lot of
+ * power. Therefore, as long as no application uses the IR input device, it is
+ * kept offline.
+ * Nearly no other device than the normal Wii Remotes supports the IR cam so
+ * you can disable this module for these devices.
+ */
+
+static void wiimod_ir_in_ir(struct wiimote_data *wdata, const __u8 *ir,
+ bool packed, unsigned int id)
+{
+ __u16 x, y;
+ __u8 xid, yid;
+ bool sync = false;
+
+ if (!(wdata->state.flags & WIIPROTO_FLAGS_IR))
+ return;
+
+ switch (id) {
+ case 0:
+ xid = ABS_HAT0X;
+ yid = ABS_HAT0Y;
+ break;
+ case 1:
+ xid = ABS_HAT1X;
+ yid = ABS_HAT1Y;
+ break;
+ case 2:
+ xid = ABS_HAT2X;
+ yid = ABS_HAT2Y;
+ break;
+ case 3:
+ xid = ABS_HAT3X;
+ yid = ABS_HAT3Y;
+ sync = true;
+ break;
+ default:
+ return;
+ }
+
+ /*
+ * Basic IR data is encoded into 3 bytes. The first two bytes are the
+ * lower 8 bit of the X/Y data, the 3rd byte contains the upper 2 bits
+ * of both.
+ * If data is packed, then the 3rd byte is put first and slightly
+ * reordered. This allows to interleave packed and non-packed data to
+ * have two IR sets in 5 bytes instead of 6.
+ * The resulting 10bit X/Y values are passed to the ABS_HAT? input dev.
+ */
+
+ if (packed) {
+ x = ir[1] | ((ir[0] & 0x03) << 8);
+ y = ir[2] | ((ir[0] & 0x0c) << 6);
+ } else {
+ x = ir[0] | ((ir[2] & 0x30) << 4);
+ y = ir[1] | ((ir[2] & 0xc0) << 2);
+ }
+
+ input_report_abs(wdata->ir, xid, x);
+ input_report_abs(wdata->ir, yid, y);
+
+ if (sync)
+ input_sync(wdata->ir);
+}
+
+static int wiimod_ir_change(struct wiimote_data *wdata, __u16 mode)
+{
+ int ret;
+ unsigned long flags;
+ __u8 format = 0;
+ static const __u8 data_enable[] = { 0x01 };
+ static const __u8 data_sens1[] = { 0x02, 0x00, 0x00, 0x71, 0x01,
+ 0x00, 0xaa, 0x00, 0x64 };
+ static const __u8 data_sens2[] = { 0x63, 0x03 };
+ static const __u8 data_fin[] = { 0x08 };
+
+ spin_lock_irqsave(&wdata->state.lock, flags);
+
+ if (mode == (wdata->state.flags & WIIPROTO_FLAGS_IR)) {
+ spin_unlock_irqrestore(&wdata->state.lock, flags);
+ return 0;
+ }
+
+ if (mode == 0) {
+ wdata->state.flags &= ~WIIPROTO_FLAGS_IR;
+ wiiproto_req_ir1(wdata, 0);
+ wiiproto_req_ir2(wdata, 0);
+ wiiproto_req_drm(wdata, WIIPROTO_REQ_NULL);
+ spin_unlock_irqrestore(&wdata->state.lock, flags);
+ return 0;
+ }
+
+ spin_unlock_irqrestore(&wdata->state.lock, flags);
+
+ ret = wiimote_cmd_acquire(wdata);
+ if (ret)
+ return ret;
+
+ /* send PIXEL CLOCK ENABLE cmd first */
+ spin_lock_irqsave(&wdata->state.lock, flags);
+ wiimote_cmd_set(wdata, WIIPROTO_REQ_IR1, 0);
+ wiiproto_req_ir1(wdata, 0x06);
+ spin_unlock_irqrestore(&wdata->state.lock, flags);
+
+ ret = wiimote_cmd_wait(wdata);
+ if (ret)
+ goto unlock;
+ if (wdata->state.cmd_err) {
+ ret = -EIO;
+ goto unlock;
+ }
+
+ /* enable IR LOGIC */
+ spin_lock_irqsave(&wdata->state.lock, flags);
+ wiimote_cmd_set(wdata, WIIPROTO_REQ_IR2, 0);
+ wiiproto_req_ir2(wdata, 0x06);
+ spin_unlock_irqrestore(&wdata->state.lock, flags);
+
+ ret = wiimote_cmd_wait(wdata);
+ if (ret)
+ goto unlock;
+ if (wdata->state.cmd_err) {
+ ret = -EIO;
+ goto unlock;
+ }
+
+ /* enable IR cam but do not make it send data, yet */
+ ret = wiimote_cmd_write(wdata, 0xb00030, data_enable,
+ sizeof(data_enable));
+ if (ret)
+ goto unlock;
+
+ /* write first sensitivity block */
+ ret = wiimote_cmd_write(wdata, 0xb00000, data_sens1,
+ sizeof(data_sens1));
+ if (ret)
+ goto unlock;
+
+ /* write second sensitivity block */
+ ret = wiimote_cmd_write(wdata, 0xb0001a, data_sens2,
+ sizeof(data_sens2));
+ if (ret)
+ goto unlock;
+
+ /* put IR cam into desired state */
+ switch (mode) {
+ case WIIPROTO_FLAG_IR_FULL:
+ format = 5;
+ break;
+ case WIIPROTO_FLAG_IR_EXT:
+ format = 3;
+ break;
+ case WIIPROTO_FLAG_IR_BASIC:
+ format = 1;
+ break;
+ }
+ ret = wiimote_cmd_write(wdata, 0xb00033, &format, sizeof(format));
+ if (ret)
+ goto unlock;
+
+ /* make IR cam send data */
+ ret = wiimote_cmd_write(wdata, 0xb00030, data_fin, sizeof(data_fin));
+ if (ret)
+ goto unlock;
+
+ /* request new DRM mode compatible to IR mode */
+ spin_lock_irqsave(&wdata->state.lock, flags);
+ wdata->state.flags &= ~WIIPROTO_FLAGS_IR;
+ wdata->state.flags |= mode & WIIPROTO_FLAGS_IR;
+ wiiproto_req_drm(wdata, WIIPROTO_REQ_NULL);
+ spin_unlock_irqrestore(&wdata->state.lock, flags);
+
+unlock:
+ wiimote_cmd_release(wdata);
+ return ret;
+}
+
+static int wiimod_ir_open(struct input_dev *dev)
+{
+ struct wiimote_data *wdata = input_get_drvdata(dev);
+
+ return wiimod_ir_change(wdata, WIIPROTO_FLAG_IR_BASIC);
+}
+
+static void wiimod_ir_close(struct input_dev *dev)
+{
+ struct wiimote_data *wdata = input_get_drvdata(dev);
+
+ wiimod_ir_change(wdata, 0);
+}
+
+static int wiimod_ir_probe(const struct wiimod_ops *ops,
+ struct wiimote_data *wdata)
+{
+ int ret;
+
+ wdata->ir = input_allocate_device();
+ if (!wdata->ir)
+ return -ENOMEM;
+
+ input_set_drvdata(wdata->ir, wdata);
+ wdata->ir->open = wiimod_ir_open;
+ wdata->ir->close = wiimod_ir_close;
+ wdata->ir->dev.parent = &wdata->hdev->dev;
+ wdata->ir->id.bustype = wdata->hdev->bus;
+ wdata->ir->id.vendor = wdata->hdev->vendor;
+ wdata->ir->id.product = wdata->hdev->product;
+ wdata->ir->id.version = wdata->hdev->version;
+ wdata->ir->name = WIIMOTE_NAME " IR";
+
+ set_bit(EV_ABS, wdata->ir->evbit);
+ set_bit(ABS_HAT0X, wdata->ir->absbit);
+ set_bit(ABS_HAT0Y, wdata->ir->absbit);
+ set_bit(ABS_HAT1X, wdata->ir->absbit);
+ set_bit(ABS_HAT1Y, wdata->ir->absbit);
+ set_bit(ABS_HAT2X, wdata->ir->absbit);
+ set_bit(ABS_HAT2Y, wdata->ir->absbit);
+ set_bit(ABS_HAT3X, wdata->ir->absbit);
+ set_bit(ABS_HAT3Y, wdata->ir->absbit);
+ input_set_abs_params(wdata->ir, ABS_HAT0X, 0, 1023, 2, 4);
+ input_set_abs_params(wdata->ir, ABS_HAT0Y, 0, 767, 2, 4);
+ input_set_abs_params(wdata->ir, ABS_HAT1X, 0, 1023, 2, 4);
+ input_set_abs_params(wdata->ir, ABS_HAT1Y, 0, 767, 2, 4);
+ input_set_abs_params(wdata->ir, ABS_HAT2X, 0, 1023, 2, 4);
+ input_set_abs_params(wdata->ir, ABS_HAT2Y, 0, 767, 2, 4);
+ input_set_abs_params(wdata->ir, ABS_HAT3X, 0, 1023, 2, 4);
+ input_set_abs_params(wdata->ir, ABS_HAT3Y, 0, 767, 2, 4);
+
+ ret = input_register_device(wdata->ir);
+ if (ret) {
+ hid_err(wdata->hdev, "cannot register input device\n");
+ goto err_free;
+ }
+
+ return 0;
+
+err_free:
+ input_free_device(wdata->ir);
+ wdata->ir = NULL;
+ return ret;
+}
+
+static void wiimod_ir_remove(const struct wiimod_ops *ops,
+ struct wiimote_data *wdata)
+{
+ if (!wdata->ir)
+ return;
+
+ input_unregister_device(wdata->ir);
+ wdata->ir = NULL;
+}
+
+static const struct wiimod_ops wiimod_ir = {
+ .flags = 0,
+ .arg = 0,
+ .probe = wiimod_ir_probe,
+ .remove = wiimod_ir_remove,
+ .in_ir = wiimod_ir_in_ir,
+};
+
+/*
+ * Nunchuk Extension
+ * The Nintendo Wii Nunchuk was the first official extension published by
+ * Nintendo. It provides two additional keys and a separate accelerometer. It
+ * can be hotplugged to standard Wii Remotes.
+ */
+
+enum wiimod_nunchuk_keys {
+ WIIMOD_NUNCHUK_KEY_C,
+ WIIMOD_NUNCHUK_KEY_Z,
+ WIIMOD_NUNCHUK_KEY_NUM,
+};
+
+static const __u16 wiimod_nunchuk_map[] = {
+ BTN_C, /* WIIMOD_NUNCHUK_KEY_C */
+ BTN_Z, /* WIIMOD_NUNCHUK_KEY_Z */
+};
+
+static void wiimod_nunchuk_in_ext(struct wiimote_data *wdata, const __u8 *ext)
+{
+ __s16 x, y, z, bx, by;
+
+ /* Byte | 8 7 | 6 5 | 4 3 | 2 | 1 |
+ * -----+----------+---------+---------+----+-----+
+ * 1 | Button X <7:0> |
+ * 2 | Button Y <7:0> |
+ * -----+----------+---------+---------+----+-----+
+ * 3 | Speed X <9:2> |
+ * 4 | Speed Y <9:2> |
+ * 5 | Speed Z <9:2> |
+ * -----+----------+---------+---------+----+-----+
+ * 6 | Z <1:0> | Y <1:0> | X <1:0> | BC | BZ |
+ * -----+----------+---------+---------+----+-----+
+ * Button X/Y is the analog stick. Speed X, Y and Z are the
+ * accelerometer data in the same format as the wiimote's accelerometer.
+ * The 6th byte contains the LSBs of the accelerometer data.
+ * BC and BZ are the C and Z buttons: 0 means pressed
+ *
+ * If reported interleaved with motionp, then the layout changes. The
+ * 5th and 6th byte changes to:
+ * -----+-----------------------------------+-----+
+ * 5 | Speed Z <9:3> | EXT |
+ * -----+--------+-----+-----+----+----+----+-----+
+ * 6 |Z <2:1> |Y <1>|X <1>| BC | BZ | 0 | 0 |
+ * -----+--------+-----+-----+----+----+----+-----+
+ * All three accelerometer values lose their LSB. The other data is
+ * still available but slightly moved.
+ *
+ * Center data for button values is 128. Center value for accelerometer
+ * values it 512 / 0x200
+ */
+
+ bx = ext[0];
+ by = ext[1];
+ bx -= 128;
+ by -= 128;
+
+ x = ext[2] << 2;
+ y = ext[3] << 2;
+ z = ext[4] << 2;
+
+ if (wdata->state.flags & WIIPROTO_FLAG_MP_ACTIVE) {
+ x |= (ext[5] >> 3) & 0x02;
+ y |= (ext[5] >> 4) & 0x02;
+ z &= ~0x4;
+ z |= (ext[5] >> 5) & 0x06;
+ } else {
+ x |= (ext[5] >> 2) & 0x03;
+ y |= (ext[5] >> 4) & 0x03;
+ z |= (ext[5] >> 6) & 0x03;
+ }
+
+ x -= 0x200;
+ y -= 0x200;
+ z -= 0x200;
+
+ input_report_abs(wdata->extension.input, ABS_HAT0X, bx);
+ input_report_abs(wdata->extension.input, ABS_HAT0Y, by);
+
+ input_report_abs(wdata->extension.input, ABS_RX, x);
+ input_report_abs(wdata->extension.input, ABS_RY, y);
+ input_report_abs(wdata->extension.input, ABS_RZ, z);
+
+ if (wdata->state.flags & WIIPROTO_FLAG_MP_ACTIVE) {
+ input_report_key(wdata->extension.input,
+ wiimod_nunchuk_map[WIIMOD_NUNCHUK_KEY_Z],
+ !(ext[5] & 0x04));
+ input_report_key(wdata->extension.input,
+ wiimod_nunchuk_map[WIIMOD_NUNCHUK_KEY_C],
+ !(ext[5] & 0x08));
+ } else {
+ input_report_key(wdata->extension.input,
+ wiimod_nunchuk_map[WIIMOD_NUNCHUK_KEY_Z],
+ !(ext[5] & 0x01));
+ input_report_key(wdata->extension.input,
+ wiimod_nunchuk_map[WIIMOD_NUNCHUK_KEY_C],
+ !(ext[5] & 0x02));
+ }
+
+ input_sync(wdata->extension.input);
+}
+
+static int wiimod_nunchuk_open(struct input_dev *dev)
+{
+ struct wiimote_data *wdata = input_get_drvdata(dev);
+ unsigned long flags;
+
+ spin_lock_irqsave(&wdata->state.lock, flags);
+ wdata->state.flags |= WIIPROTO_FLAG_EXT_USED;
+ wiiproto_req_drm(wdata, WIIPROTO_REQ_NULL);
+ spin_unlock_irqrestore(&wdata->state.lock, flags);
+
+ return 0;
+}
+
+static void wiimod_nunchuk_close(struct input_dev *dev)
+{
+ struct wiimote_data *wdata = input_get_drvdata(dev);
+ unsigned long flags;
+
+ spin_lock_irqsave(&wdata->state.lock, flags);
+ wdata->state.flags &= ~WIIPROTO_FLAG_EXT_USED;
+ wiiproto_req_drm(wdata, WIIPROTO_REQ_NULL);
+ spin_unlock_irqrestore(&wdata->state.lock, flags);
+}
+
+static int wiimod_nunchuk_probe(const struct wiimod_ops *ops,
+ struct wiimote_data *wdata)
+{
+ int ret, i;
+
+ wdata->extension.input = input_allocate_device();
+ if (!wdata->extension.input)
+ return -ENOMEM;
+
+ input_set_drvdata(wdata->extension.input, wdata);
+ wdata->extension.input->open = wiimod_nunchuk_open;
+ wdata->extension.input->close = wiimod_nunchuk_close;
+ wdata->extension.input->dev.parent = &wdata->hdev->dev;
+ wdata->extension.input->id.bustype = wdata->hdev->bus;
+ wdata->extension.input->id.vendor = wdata->hdev->vendor;
+ wdata->extension.input->id.product = wdata->hdev->product;
+ wdata->extension.input->id.version = wdata->hdev->version;
+ wdata->extension.input->name = WIIMOTE_NAME " Nunchuk";
+
+ set_bit(EV_KEY, wdata->extension.input->evbit);
+ for (i = 0; i < WIIMOD_NUNCHUK_KEY_NUM; ++i)
+ set_bit(wiimod_nunchuk_map[i],
+ wdata->extension.input->keybit);
+
+ set_bit(EV_ABS, wdata->extension.input->evbit);
+ set_bit(ABS_HAT0X, wdata->extension.input->absbit);
+ set_bit(ABS_HAT0Y, wdata->extension.input->absbit);
+ input_set_abs_params(wdata->extension.input,
+ ABS_HAT0X, -120, 120, 2, 4);
+ input_set_abs_params(wdata->extension.input,
+ ABS_HAT0Y, -120, 120, 2, 4);
+ set_bit(ABS_RX, wdata->extension.input->absbit);
+ set_bit(ABS_RY, wdata->extension.input->absbit);
+ set_bit(ABS_RZ, wdata->extension.input->absbit);
+ input_set_abs_params(wdata->extension.input,
+ ABS_RX, -500, 500, 2, 4);
+ input_set_abs_params(wdata->extension.input,
+ ABS_RY, -500, 500, 2, 4);
+ input_set_abs_params(wdata->extension.input,
+ ABS_RZ, -500, 500, 2, 4);
+
+ ret = input_register_device(wdata->extension.input);
+ if (ret)
+ goto err_free;
+
+ return 0;
+
+err_free:
+ input_free_device(wdata->extension.input);
+ wdata->extension.input = NULL;
+ return ret;
+}
+
+static void wiimod_nunchuk_remove(const struct wiimod_ops *ops,
+ struct wiimote_data *wdata)
+{
+ if (!wdata->extension.input)
+ return;
+
+ input_unregister_device(wdata->extension.input);
+ wdata->extension.input = NULL;
+}
+
+static const struct wiimod_ops wiimod_nunchuk = {
+ .flags = 0,
+ .arg = 0,
+ .probe = wiimod_nunchuk_probe,
+ .remove = wiimod_nunchuk_remove,
+ .in_ext = wiimod_nunchuk_in_ext,
+};
+
+/*
+ * Classic Controller
+ * Another official extension from Nintendo. It provides a classic
+ * gamecube-like controller that can be hotplugged on the Wii Remote.
+ * It has several hardware buttons and switches that are all reported via
+ * a normal extension device.
+ */
+
+enum wiimod_classic_keys {
+ WIIMOD_CLASSIC_KEY_A,
+ WIIMOD_CLASSIC_KEY_B,
+ WIIMOD_CLASSIC_KEY_X,
+ WIIMOD_CLASSIC_KEY_Y,
+ WIIMOD_CLASSIC_KEY_ZL,
+ WIIMOD_CLASSIC_KEY_ZR,
+ WIIMOD_CLASSIC_KEY_PLUS,
+ WIIMOD_CLASSIC_KEY_MINUS,
+ WIIMOD_CLASSIC_KEY_HOME,
+ WIIMOD_CLASSIC_KEY_LEFT,
+ WIIMOD_CLASSIC_KEY_RIGHT,
+ WIIMOD_CLASSIC_KEY_UP,
+ WIIMOD_CLASSIC_KEY_DOWN,
+ WIIMOD_CLASSIC_KEY_LT,
+ WIIMOD_CLASSIC_KEY_RT,
+ WIIMOD_CLASSIC_KEY_NUM,
+};
+
+static const __u16 wiimod_classic_map[] = {
+ BTN_A, /* WIIMOD_CLASSIC_KEY_A */
+ BTN_B, /* WIIMOD_CLASSIC_KEY_B */
+ BTN_X, /* WIIMOD_CLASSIC_KEY_X */
+ BTN_Y, /* WIIMOD_CLASSIC_KEY_Y */
+ BTN_TL2, /* WIIMOD_CLASSIC_KEY_ZL */
+ BTN_TR2, /* WIIMOD_CLASSIC_KEY_ZR */
+ KEY_NEXT, /* WIIMOD_CLASSIC_KEY_PLUS */
+ KEY_PREVIOUS, /* WIIMOD_CLASSIC_KEY_MINUS */
+ BTN_MODE, /* WIIMOD_CLASSIC_KEY_HOME */
+ KEY_LEFT, /* WIIMOD_CLASSIC_KEY_LEFT */
+ KEY_RIGHT, /* WIIMOD_CLASSIC_KEY_RIGHT */
+ KEY_UP, /* WIIMOD_CLASSIC_KEY_UP */
+ KEY_DOWN, /* WIIMOD_CLASSIC_KEY_DOWN */
+ BTN_TL, /* WIIMOD_CLASSIC_KEY_LT */
+ BTN_TR, /* WIIMOD_CLASSIC_KEY_RT */
+};
+
+static void wiimod_classic_in_ext(struct wiimote_data *wdata, const __u8 *ext)
+{
+ __s8 rx, ry, lx, ly, lt, rt;
+
+ /* Byte | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 |
+ * -----+-----+-----+-----+-----+-----+-----+-----+-----+
+ * 1 | RX <5:4> | LX <5:0> |
+ * 2 | RX <3:2> | LY <5:0> |
+ * -----+-----+-----+-----+-----------------------------+
+ * 3 |RX<1>| LT <5:4> | RY <5:1> |
+ * -----+-----+-----------+-----------------------------+
+ * 4 | LT <3:1> | RT <5:1> |
+ * -----+-----+-----+-----+-----+-----+-----+-----+-----+
+ * 5 | BDR | BDD | BLT | B- | BH | B+ | BRT | 1 |
+ * -----+-----+-----+-----+-----+-----+-----+-----+-----+
+ * 6 | BZL | BB | BY | BA | BX | BZR | BDL | BDU |
+ * -----+-----+-----+-----+-----+-----+-----+-----+-----+
+ * All buttons are 0 if pressed
+ * RX and RY are right analog stick
+ * LX and LY are left analog stick
+ * LT is left trigger, RT is right trigger
+ * BLT is 0 if left trigger is fully pressed
+ * BRT is 0 if right trigger is fully pressed
+ * BDR, BDD, BDL, BDU form the D-Pad with right, down, left, up buttons
+ * BZL is left Z button and BZR is right Z button
+ * B-, BH, B+ are +, HOME and - buttons
+ * BB, BY, BA, BX are A, B, X, Y buttons
+ * LSB of RX, RY, LT, and RT are not transmitted and always 0.
+ *
+ * With motionp enabled it changes slightly to this:
+ * Byte | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 |
+ * -----+-----+-----+-----+-----+-----+-----+-----+-----+
+ * 1 | RX <5:4> | LX <5:1> | BDU |
+ * 2 | RX <3:2> | LY <5:1> | BDL |
+ * -----+-----+-----+-----+-----------------------+-----+
+ * 3 |RX<1>| LT <5:4> | RY <5:1> |
+ * -----+-----+-----------+-----------------------------+
+ * 4 | LT <3:1> | RT <5:1> |
+ * -----+-----+-----+-----+-----+-----+-----+-----+-----+
+ * 5 | BDR | BDD | BLT | B- | BH | B+ | BRT | EXT |
+ * -----+-----+-----+-----+-----+-----+-----+-----+-----+
+ * 6 | BZL | BB | BY | BA | BX | BZR | 0 | 0 |
+ * -----+-----+-----+-----+-----+-----+-----+-----+-----+
+ * Only the LSBs of LX and LY are lost. BDU and BDL are moved, the rest
+ * is the same as before.
+ */
+
+ if (wdata->state.flags & WIIPROTO_FLAG_MP_ACTIVE) {
+ lx = ext[0] & 0x3e;
+ ly = ext[1] & 0x3e;
+ } else {
+ lx = ext[0] & 0x3f;
+ ly = ext[1] & 0x3f;
+ }
+
+ rx = (ext[0] >> 3) & 0x18;
+ rx |= (ext[1] >> 5) & 0x06;
+ rx |= (ext[2] >> 7) & 0x01;
+ ry = ext[2] & 0x1f;
+
+ rt = ext[3] & 0x1f;
+ lt = (ext[2] >> 2) & 0x18;
+ lt |= (ext[3] >> 5) & 0x07;
+
+ rx <<= 1;
+ ry <<= 1;
+ rt <<= 1;
+ lt <<= 1;
+
+ input_report_abs(wdata->extension.input, ABS_HAT1X, lx - 0x20);
+ input_report_abs(wdata->extension.input, ABS_HAT1Y, ly - 0x20);
+ input_report_abs(wdata->extension.input, ABS_HAT2X, rx - 0x20);
+ input_report_abs(wdata->extension.input, ABS_HAT2Y, ry - 0x20);
+ input_report_abs(wdata->extension.input, ABS_HAT3X, rt);
+ input_report_abs(wdata->extension.input, ABS_HAT3Y, lt);
+
+ input_report_key(wdata->extension.input,
+ wiimod_classic_map[WIIMOD_CLASSIC_KEY_RIGHT],
+ !(ext[4] & 0x80));
+ input_report_key(wdata->extension.input,
+ wiimod_classic_map[WIIMOD_CLASSIC_KEY_DOWN],
+ !(ext[4] & 0x40));
+ input_report_key(wdata->extension.input,
+ wiimod_classic_map[WIIMOD_CLASSIC_KEY_LT],
+ !(ext[4] & 0x20));
+ input_report_key(wdata->extension.input,
+ wiimod_classic_map[WIIMOD_CLASSIC_KEY_MINUS],
+ !(ext[4] & 0x10));
+ input_report_key(wdata->extension.input,
+ wiimod_classic_map[WIIMOD_CLASSIC_KEY_HOME],
+ !(ext[4] & 0x08));
+ input_report_key(wdata->extension.input,
+ wiimod_classic_map[WIIMOD_CLASSIC_KEY_PLUS],
+ !(ext[4] & 0x04));
+ input_report_key(wdata->extension.input,
+ wiimod_classic_map[WIIMOD_CLASSIC_KEY_RT],
+ !(ext[4] & 0x02));
+ input_report_key(wdata->extension.input,
+ wiimod_classic_map[WIIMOD_CLASSIC_KEY_ZL],
+ !(ext[5] & 0x80));
+ input_report_key(wdata->extension.input,
+ wiimod_classic_map[WIIMOD_CLASSIC_KEY_B],
+ !(ext[5] & 0x40));
+ input_report_key(wdata->extension.input,
+ wiimod_classic_map[WIIMOD_CLASSIC_KEY_Y],
+ !(ext[5] & 0x20));
+ input_report_key(wdata->extension.input,
+ wiimod_classic_map[WIIMOD_CLASSIC_KEY_A],
+ !(ext[5] & 0x10));
+ input_report_key(wdata->extension.input,
+ wiimod_classic_map[WIIMOD_CLASSIC_KEY_X],
+ !(ext[5] & 0x08));
+ input_report_key(wdata->extension.input,
+ wiimod_classic_map[WIIMOD_CLASSIC_KEY_ZR],
+ !(ext[5] & 0x04));
+
+ if (wdata->state.flags & WIIPROTO_FLAG_MP_ACTIVE) {
+ input_report_key(wdata->extension.input,
+ wiimod_classic_map[WIIMOD_CLASSIC_KEY_LEFT],
+ !(ext[1] & 0x01));
+ input_report_key(wdata->extension.input,
+ wiimod_classic_map[WIIMOD_CLASSIC_KEY_UP],
+ !(ext[0] & 0x01));
+ } else {
+ input_report_key(wdata->extension.input,
+ wiimod_classic_map[WIIMOD_CLASSIC_KEY_LEFT],
+ !(ext[5] & 0x02));
+ input_report_key(wdata->extension.input,
+ wiimod_classic_map[WIIMOD_CLASSIC_KEY_UP],
+ !(ext[5] & 0x01));
+ }
+
+ input_sync(wdata->extension.input);
+}
+
+static int wiimod_classic_open(struct input_dev *dev)
+{
+ struct wiimote_data *wdata = input_get_drvdata(dev);
+ unsigned long flags;
+
+ spin_lock_irqsave(&wdata->state.lock, flags);
+ wdata->state.flags |= WIIPROTO_FLAG_EXT_USED;
+ wiiproto_req_drm(wdata, WIIPROTO_REQ_NULL);
+ spin_unlock_irqrestore(&wdata->state.lock, flags);
+
+ return 0;
+}
+
+static void wiimod_classic_close(struct input_dev *dev)
+{
+ struct wiimote_data *wdata = input_get_drvdata(dev);
+ unsigned long flags;
+
+ spin_lock_irqsave(&wdata->state.lock, flags);
+ wdata->state.flags &= ~WIIPROTO_FLAG_EXT_USED;
+ wiiproto_req_drm(wdata, WIIPROTO_REQ_NULL);
+ spin_unlock_irqrestore(&wdata->state.lock, flags);
+}
+
+static int wiimod_classic_probe(const struct wiimod_ops *ops,
+ struct wiimote_data *wdata)
+{
+ int ret, i;
+
+ wdata->extension.input = input_allocate_device();
+ if (!wdata->extension.input)
+ return -ENOMEM;
+
+ input_set_drvdata(wdata->extension.input, wdata);
+ wdata->extension.input->open = wiimod_classic_open;
+ wdata->extension.input->close = wiimod_classic_close;
+ wdata->extension.input->dev.parent = &wdata->hdev->dev;
+ wdata->extension.input->id.bustype = wdata->hdev->bus;
+ wdata->extension.input->id.vendor = wdata->hdev->vendor;
+ wdata->extension.input->id.product = wdata->hdev->product;
+ wdata->extension.input->id.version = wdata->hdev->version;
+ wdata->extension.input->name = WIIMOTE_NAME " Classic Controller";
+
+ set_bit(EV_KEY, wdata->extension.input->evbit);
+ for (i = 0; i < WIIMOD_CLASSIC_KEY_NUM; ++i)
+ set_bit(wiimod_classic_map[i],
+ wdata->extension.input->keybit);
+
+ set_bit(EV_ABS, wdata->extension.input->evbit);
+ set_bit(ABS_HAT1X, wdata->extension.input->absbit);
+ set_bit(ABS_HAT1Y, wdata->extension.input->absbit);
+ set_bit(ABS_HAT2X, wdata->extension.input->absbit);
+ set_bit(ABS_HAT2Y, wdata->extension.input->absbit);
+ set_bit(ABS_HAT3X, wdata->extension.input->absbit);
+ set_bit(ABS_HAT3Y, wdata->extension.input->absbit);
+ input_set_abs_params(wdata->extension.input,
+ ABS_HAT1X, -30, 30, 1, 1);
+ input_set_abs_params(wdata->extension.input,
+ ABS_HAT1Y, -30, 30, 1, 1);
+ input_set_abs_params(wdata->extension.input,
+ ABS_HAT2X, -30, 30, 1, 1);
+ input_set_abs_params(wdata->extension.input,
+ ABS_HAT2Y, -30, 30, 1, 1);
+ input_set_abs_params(wdata->extension.input,
+ ABS_HAT3X, -30, 30, 1, 1);
+ input_set_abs_params(wdata->extension.input,
+ ABS_HAT3Y, -30, 30, 1, 1);
+
+ ret = input_register_device(wdata->extension.input);
+ if (ret)
+ goto err_free;
+
+ return 0;
+
+err_free:
+ input_free_device(wdata->extension.input);
+ wdata->extension.input = NULL;
+ return ret;
+}
+
+static void wiimod_classic_remove(const struct wiimod_ops *ops,
+ struct wiimote_data *wdata)
+{
+ if (!wdata->extension.input)
+ return;
+
+ input_unregister_device(wdata->extension.input);
+ wdata->extension.input = NULL;
+}
+
+static const struct wiimod_ops wiimod_classic = {
+ .flags = 0,
+ .arg = 0,
+ .probe = wiimod_classic_probe,
+ .remove = wiimod_classic_remove,
+ .in_ext = wiimod_classic_in_ext,
+};
+
+/*
+ * Balance Board Extension
+ * The Nintendo Wii Balance Board provides four hardware weight sensor plus a
+ * single push button. No other peripherals are available. However, the
+ * balance-board data is sent via a standard Wii Remote extension. All other
+ * data for non-present hardware is zeroed out.
+ * Some 3rd party devices react allergic if we try to access normal Wii Remote
+ * hardware, so this extension module should be the only module that is loaded
+ * on balance boards.
+ * The balance board needs 8 bytes extension data instead of basic 6 bytes so
+ * it needs the WIIMOD_FLAG_EXT8 flag.
+ */
+
+static void wiimod_bboard_in_keys(struct wiimote_data *wdata, const __u8 *keys)
+{
+ input_report_key(wdata->extension.input, BTN_A,
+ !!(keys[1] & 0x08));
+ input_sync(wdata->extension.input);
+}
+
+static void wiimod_bboard_in_ext(struct wiimote_data *wdata,
+ const __u8 *ext)
+{
+ __s32 val[4], tmp, div;
+ unsigned int i;
+ struct wiimote_state *s = &wdata->state;
+
+ /*
+ * Balance board data layout:
+ *
+ * Byte | 8 7 6 5 4 3 2 1 |
+ * -----+--------------------------+
+ * 1 | Top Right <15:8> |
+ * 2 | Top Right <7:0> |
+ * -----+--------------------------+
+ * 3 | Bottom Right <15:8> |
+ * 4 | Bottom Right <7:0> |
+ * -----+--------------------------+
+ * 5 | Top Left <15:8> |
+ * 6 | Top Left <7:0> |
+ * -----+--------------------------+
+ * 7 | Bottom Left <15:8> |
+ * 8 | Bottom Left <7:0> |
+ * -----+--------------------------+
+ *
+ * These values represent the weight-measurements of the Wii-balance
+ * board with 16bit precision.
+ *
+ * The balance-board is never reported interleaved with motionp.
+ */
+
+ val[0] = ext[0];
+ val[0] <<= 8;
+ val[0] |= ext[1];
+
+ val[1] = ext[2];
+ val[1] <<= 8;
+ val[1] |= ext[3];
+
+ val[2] = ext[4];
+ val[2] <<= 8;
+ val[2] |= ext[5];
+
+ val[3] = ext[6];
+ val[3] <<= 8;
+ val[3] |= ext[7];
+
+ /* apply calibration data */
+ for (i = 0; i < 4; i++) {
+ if (val[i] <= s->calib_bboard[i][0]) {
+ tmp = 0;
+ } else if (val[i] < s->calib_bboard[i][1]) {
+ tmp = val[i] - s->calib_bboard[i][0];
+ tmp *= 1700;
+ div = s->calib_bboard[i][1] - s->calib_bboard[i][0];
+ tmp /= div ? div : 1;
+ } else {
+ tmp = val[i] - s->calib_bboard[i][1];
+ tmp *= 1700;
+ div = s->calib_bboard[i][2] - s->calib_bboard[i][1];
+ tmp /= div ? div : 1;
+ tmp += 1700;
+ }
+ val[i] = tmp;
+ }
+
+ input_report_abs(wdata->extension.input, ABS_HAT0X, val[0]);
+ input_report_abs(wdata->extension.input, ABS_HAT0Y, val[1]);
+ input_report_abs(wdata->extension.input, ABS_HAT1X, val[2]);
+ input_report_abs(wdata->extension.input, ABS_HAT1Y, val[3]);
+ input_sync(wdata->extension.input);
+}
+
+static int wiimod_bboard_open(struct input_dev *dev)
+{
+ struct wiimote_data *wdata = input_get_drvdata(dev);
+ unsigned long flags;
+
+ spin_lock_irqsave(&wdata->state.lock, flags);
+ wdata->state.flags |= WIIPROTO_FLAG_EXT_USED;
+ wiiproto_req_drm(wdata, WIIPROTO_REQ_NULL);
+ spin_unlock_irqrestore(&wdata->state.lock, flags);
+
+ return 0;
+}
+
+static void wiimod_bboard_close(struct input_dev *dev)
+{
+ struct wiimote_data *wdata = input_get_drvdata(dev);
+ unsigned long flags;
+
+ spin_lock_irqsave(&wdata->state.lock, flags);
+ wdata->state.flags &= ~WIIPROTO_FLAG_EXT_USED;
+ wiiproto_req_drm(wdata, WIIPROTO_REQ_NULL);
+ spin_unlock_irqrestore(&wdata->state.lock, flags);
+}
+
+static ssize_t wiimod_bboard_calib_show(struct device *dev,
+ struct device_attribute *attr,
+ char *out)
+{
+ struct wiimote_data *wdata = dev_to_wii(dev);
+ int i, j, ret;
+ __u16 val;
+ __u8 buf[24], offs;
+
+ ret = wiimote_cmd_acquire(wdata);
+ if (ret)
+ return ret;
+
+ ret = wiimote_cmd_read(wdata, 0xa40024, buf, 12);
+ if (ret != 12) {
+ wiimote_cmd_release(wdata);
+ return ret < 0 ? ret : -EIO;
+ }
+ ret = wiimote_cmd_read(wdata, 0xa40024 + 12, buf + 12, 12);
+ if (ret != 12) {
+ wiimote_cmd_release(wdata);
+ return ret < 0 ? ret : -EIO;
+ }
+
+ wiimote_cmd_release(wdata);
+
+ spin_lock_irq(&wdata->state.lock);
+ offs = 0;
+ for (i = 0; i < 3; ++i) {
+ for (j = 0; j < 4; ++j) {
+ wdata->state.calib_bboard[j][i] = buf[offs];
+ wdata->state.calib_bboard[j][i] <<= 8;
+ wdata->state.calib_bboard[j][i] |= buf[offs + 1];
+ offs += 2;
+ }
+ }
+ spin_unlock_irq(&wdata->state.lock);
+
+ ret = 0;
+ for (i = 0; i < 3; ++i) {
+ for (j = 0; j < 4; ++j) {
+ val = wdata->state.calib_bboard[j][i];
+ if (i == 2 && j == 3)
+ ret += sprintf(&out[ret], "%04x\n", val);
+ else
+ ret += sprintf(&out[ret], "%04x:", val);
+ }
+ }
+
+ return ret;
+}
+
+static DEVICE_ATTR(bboard_calib, S_IRUGO, wiimod_bboard_calib_show, NULL);
+
+static int wiimod_bboard_probe(const struct wiimod_ops *ops,
+ struct wiimote_data *wdata)
+{
+ int ret, i, j;
+ __u8 buf[24], offs;
+
+ wiimote_cmd_acquire_noint(wdata);
+
+ ret = wiimote_cmd_read(wdata, 0xa40024, buf, 12);
+ if (ret != 12) {
+ wiimote_cmd_release(wdata);
+ return ret < 0 ? ret : -EIO;
+ }
+ ret = wiimote_cmd_read(wdata, 0xa40024 + 12, buf + 12, 12);
+ if (ret != 12) {
+ wiimote_cmd_release(wdata);
+ return ret < 0 ? ret : -EIO;
+ }
+
+ wiimote_cmd_release(wdata);
+
+ offs = 0;
+ for (i = 0; i < 3; ++i) {
+ for (j = 0; j < 4; ++j) {
+ wdata->state.calib_bboard[j][i] = buf[offs];
+ wdata->state.calib_bboard[j][i] <<= 8;
+ wdata->state.calib_bboard[j][i] |= buf[offs + 1];
+ offs += 2;
+ }
+ }
+
+ wdata->extension.input = input_allocate_device();
+ if (!wdata->extension.input)
+ return -ENOMEM;
+
+ ret = device_create_file(&wdata->hdev->dev,
+ &dev_attr_bboard_calib);
+ if (ret) {
+ hid_err(wdata->hdev, "cannot create sysfs attribute\n");
+ goto err_free;
+ }
+
+ input_set_drvdata(wdata->extension.input, wdata);
+ wdata->extension.input->open = wiimod_bboard_open;
+ wdata->extension.input->close = wiimod_bboard_close;
+ wdata->extension.input->dev.parent = &wdata->hdev->dev;
+ wdata->extension.input->id.bustype = wdata->hdev->bus;
+ wdata->extension.input->id.vendor = wdata->hdev->vendor;
+ wdata->extension.input->id.product = wdata->hdev->product;
+ wdata->extension.input->id.version = wdata->hdev->version;
+ wdata->extension.input->name = WIIMOTE_NAME " Balance Board";
+
+ set_bit(EV_KEY, wdata->extension.input->evbit);
+ set_bit(BTN_A, wdata->extension.input->keybit);
+
+ set_bit(EV_ABS, wdata->extension.input->evbit);
+ set_bit(ABS_HAT0X, wdata->extension.input->absbit);
+ set_bit(ABS_HAT0Y, wdata->extension.input->absbit);
+ set_bit(ABS_HAT1X, wdata->extension.input->absbit);
+ set_bit(ABS_HAT1Y, wdata->extension.input->absbit);
+ input_set_abs_params(wdata->extension.input,
+ ABS_HAT0X, 0, 65535, 2, 4);
+ input_set_abs_params(wdata->extension.input,
+ ABS_HAT0Y, 0, 65535, 2, 4);
+ input_set_abs_params(wdata->extension.input,
+ ABS_HAT1X, 0, 65535, 2, 4);
+ input_set_abs_params(wdata->extension.input,
+ ABS_HAT1Y, 0, 65535, 2, 4);
+
+ ret = input_register_device(wdata->extension.input);
+ if (ret)
+ goto err_file;
+
+ return 0;
+
+err_file:
+ device_remove_file(&wdata->hdev->dev,
+ &dev_attr_bboard_calib);
+err_free:
+ input_free_device(wdata->extension.input);
+ wdata->extension.input = NULL;
+ return ret;
+}
+
+static void wiimod_bboard_remove(const struct wiimod_ops *ops,
+ struct wiimote_data *wdata)
+{
+ if (!wdata->extension.input)
+ return;
+
+ input_unregister_device(wdata->extension.input);
+ wdata->extension.input = NULL;
+ device_remove_file(&wdata->hdev->dev,
+ &dev_attr_bboard_calib);
+}
+
+static const struct wiimod_ops wiimod_bboard = {
+ .flags = WIIMOD_FLAG_EXT8,
+ .arg = 0,
+ .probe = wiimod_bboard_probe,
+ .remove = wiimod_bboard_remove,
+ .in_keys = wiimod_bboard_in_keys,
+ .in_ext = wiimod_bboard_in_ext,
+};
+
+/*
+ * Pro Controller
+ * Released with the Wii U was the Nintendo Wii U Pro Controller. It does not
+ * work together with the classic Wii, but only with the new Wii U. However, it
+ * uses the same protocol and provides a builtin "classic controller pro"
+ * extension, few standard buttons, a rumble motor, 4 LEDs and a battery.
+ * We provide all these via a standard extension device as the device doesn't
+ * feature an extension port.
+ */
+
+enum wiimod_pro_keys {
+ WIIMOD_PRO_KEY_A,
+ WIIMOD_PRO_KEY_B,
+ WIIMOD_PRO_KEY_X,
+ WIIMOD_PRO_KEY_Y,
+ WIIMOD_PRO_KEY_PLUS,
+ WIIMOD_PRO_KEY_MINUS,
+ WIIMOD_PRO_KEY_HOME,
+ WIIMOD_PRO_KEY_LEFT,
+ WIIMOD_PRO_KEY_RIGHT,
+ WIIMOD_PRO_KEY_UP,
+ WIIMOD_PRO_KEY_DOWN,
+ WIIMOD_PRO_KEY_TL,
+ WIIMOD_PRO_KEY_TR,
+ WIIMOD_PRO_KEY_ZL,
+ WIIMOD_PRO_KEY_ZR,
+ WIIMOD_PRO_KEY_THUMBL,
+ WIIMOD_PRO_KEY_THUMBR,
+ WIIMOD_PRO_KEY_NUM,
+};
+
+static const __u16 wiimod_pro_map[] = {
+ BTN_EAST, /* WIIMOD_PRO_KEY_A */
+ BTN_SOUTH, /* WIIMOD_PRO_KEY_B */
+ BTN_NORTH, /* WIIMOD_PRO_KEY_X */
+ BTN_WEST, /* WIIMOD_PRO_KEY_Y */
+ BTN_START, /* WIIMOD_PRO_KEY_PLUS */
+ BTN_SELECT, /* WIIMOD_PRO_KEY_MINUS */
+ BTN_MODE, /* WIIMOD_PRO_KEY_HOME */
+ BTN_DPAD_LEFT, /* WIIMOD_PRO_KEY_LEFT */
+ BTN_DPAD_RIGHT, /* WIIMOD_PRO_KEY_RIGHT */
+ BTN_DPAD_UP, /* WIIMOD_PRO_KEY_UP */
+ BTN_DPAD_DOWN, /* WIIMOD_PRO_KEY_DOWN */
+ BTN_TL, /* WIIMOD_PRO_KEY_TL */
+ BTN_TR, /* WIIMOD_PRO_KEY_TR */
+ BTN_TL2, /* WIIMOD_PRO_KEY_ZL */
+ BTN_TR2, /* WIIMOD_PRO_KEY_ZR */
+ BTN_THUMBL, /* WIIMOD_PRO_KEY_THUMBL */
+ BTN_THUMBR, /* WIIMOD_PRO_KEY_THUMBR */
+};
+
+static void wiimod_pro_in_ext(struct wiimote_data *wdata, const __u8 *ext)
+{
+ __s16 rx, ry, lx, ly;
+
+ /* Byte | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 |
+ * -----+-----+-----+-----+-----+-----+-----+-----+-----+
+ * 1 | LX <7:0> |
+ * -----+-----------------------+-----------------------+
+ * 2 | 0 0 0 0 | LX <11:8> |
+ * -----+-----------------------+-----------------------+
+ * 3 | RX <7:0> |
+ * -----+-----------------------+-----------------------+
+ * 4 | 0 0 0 0 | RX <11:8> |
+ * -----+-----------------------+-----------------------+
+ * 5 | LY <7:0> |
+ * -----+-----------------------+-----------------------+
+ * 6 | 0 0 0 0 | LY <11:8> |
+ * -----+-----------------------+-----------------------+
+ * 7 | RY <7:0> |
+ * -----+-----------------------+-----------------------+
+ * 8 | 0 0 0 0 | RY <11:8> |
+ * -----+-----+-----+-----+-----+-----+-----+-----+-----+
+ * 9 | BDR | BDD | BLT | B- | BH | B+ | BRT | 1 |
+ * -----+-----+-----+-----+-----+-----+-----+-----+-----+
+ * 10 | BZL | BB | BY | BA | BX | BZR | BDL | BDU |
+ * -----+-----+-----+-----+-----+-----+-----+-----+-----+
+ * 11 | 1 | BATTERY | USB |CHARG|LTHUM|RTHUM|
+ * -----+-----+-----------------+-----------+-----+-----+
+ * All buttons are low-active (0 if pressed)
+ * RX and RY are right analog stick
+ * LX and LY are left analog stick
+ * BLT is left trigger, BRT is right trigger.
+ * BDR, BDD, BDL, BDU form the D-Pad with right, down, left, up buttons
+ * BZL is left Z button and BZR is right Z button
+ * B-, BH, B+ are +, HOME and - buttons
+ * BB, BY, BA, BX are A, B, X, Y buttons
+ *
+ * Bits marked as 0/1 are unknown and never changed during tests.
+ *
+ * Not entirely verified:
+ * CHARG: 1 if uncharging, 0 if charging
+ * USB: 1 if not connected, 0 if connected
+ * BATTERY: battery capacity from 000 (empty) to 100 (full)
+ */
+
+ lx = (ext[0] & 0xff) | ((ext[1] & 0x0f) << 8);
+ rx = (ext[2] & 0xff) | ((ext[3] & 0x0f) << 8);
+ ly = (ext[4] & 0xff) | ((ext[5] & 0x0f) << 8);
+ ry = (ext[6] & 0xff) | ((ext[7] & 0x0f) << 8);
+
+ input_report_abs(wdata->extension.input, ABS_X, lx - 0x800);
+ input_report_abs(wdata->extension.input, ABS_Y, ly - 0x800);
+ input_report_abs(wdata->extension.input, ABS_RX, rx - 0x800);
+ input_report_abs(wdata->extension.input, ABS_RY, ry - 0x800);
+
+ input_report_key(wdata->extension.input,
+ wiimod_pro_map[WIIMOD_PRO_KEY_RIGHT],
+ !(ext[8] & 0x80));
+ input_report_key(wdata->extension.input,
+ wiimod_pro_map[WIIMOD_PRO_KEY_DOWN],
+ !(ext[8] & 0x40));
+ input_report_key(wdata->extension.input,
+ wiimod_pro_map[WIIMOD_PRO_KEY_TL],
+ !(ext[8] & 0x20));
+ input_report_key(wdata->extension.input,
+ wiimod_pro_map[WIIMOD_PRO_KEY_MINUS],
+ !(ext[8] & 0x10));
+ input_report_key(wdata->extension.input,
+ wiimod_pro_map[WIIMOD_PRO_KEY_HOME],
+ !(ext[8] & 0x08));
+ input_report_key(wdata->extension.input,
+ wiimod_pro_map[WIIMOD_PRO_KEY_PLUS],
+ !(ext[8] & 0x04));
+ input_report_key(wdata->extension.input,
+ wiimod_pro_map[WIIMOD_PRO_KEY_TR],
+ !(ext[8] & 0x02));
+
+ input_report_key(wdata->extension.input,
+ wiimod_pro_map[WIIMOD_PRO_KEY_ZL],
+ !(ext[9] & 0x80));
+ input_report_key(wdata->extension.input,
+ wiimod_pro_map[WIIMOD_PRO_KEY_B],
+ !(ext[9] & 0x40));
+ input_report_key(wdata->extension.input,
+ wiimod_pro_map[WIIMOD_PRO_KEY_Y],
+ !(ext[9] & 0x20));
+ input_report_key(wdata->extension.input,
+ wiimod_pro_map[WIIMOD_PRO_KEY_A],
+ !(ext[9] & 0x10));
+ input_report_key(wdata->extension.input,
+ wiimod_pro_map[WIIMOD_PRO_KEY_X],
+ !(ext[9] & 0x08));
+ input_report_key(wdata->extension.input,
+ wiimod_pro_map[WIIMOD_PRO_KEY_ZR],
+ !(ext[9] & 0x04));
+ input_report_key(wdata->extension.input,
+ wiimod_pro_map[WIIMOD_PRO_KEY_LEFT],
+ !(ext[9] & 0x02));
+ input_report_key(wdata->extension.input,
+ wiimod_pro_map[WIIMOD_PRO_KEY_UP],
+ !(ext[9] & 0x01));
+
+ input_report_key(wdata->extension.input,
+ wiimod_pro_map[WIIMOD_PRO_KEY_THUMBL],
+ !(ext[10] & 0x02));
+ input_report_key(wdata->extension.input,
+ wiimod_pro_map[WIIMOD_PRO_KEY_THUMBR],
+ !(ext[10] & 0x01));
+
+ input_sync(wdata->extension.input);
+}
+
+static int wiimod_pro_open(struct input_dev *dev)
+{
+ struct wiimote_data *wdata = input_get_drvdata(dev);
+ unsigned long flags;
+
+ spin_lock_irqsave(&wdata->state.lock, flags);
+ wdata->state.flags |= WIIPROTO_FLAG_EXT_USED;
+ wiiproto_req_drm(wdata, WIIPROTO_REQ_NULL);
+ spin_unlock_irqrestore(&wdata->state.lock, flags);
+
+ return 0;
+}
+
+static void wiimod_pro_close(struct input_dev *dev)
+{
+ struct wiimote_data *wdata = input_get_drvdata(dev);
+ unsigned long flags;
+
+ spin_lock_irqsave(&wdata->state.lock, flags);
+ wdata->state.flags &= ~WIIPROTO_FLAG_EXT_USED;
+ wiiproto_req_drm(wdata, WIIPROTO_REQ_NULL);
+ spin_unlock_irqrestore(&wdata->state.lock, flags);
+}
+
+static int wiimod_pro_play(struct input_dev *dev, void *data,
+ struct ff_effect *eff)
+{
+ struct wiimote_data *wdata = input_get_drvdata(dev);
+ __u8 value;
+ unsigned long flags;
+
+ /*
+ * The wiimote supports only a single rumble motor so if any magnitude
+ * is set to non-zero then we start the rumble motor. If both are set to
+ * zero, we stop the rumble motor.
+ */
+
+ if (eff->u.rumble.strong_magnitude || eff->u.rumble.weak_magnitude)
+ value = 1;
+ else
+ value = 0;
+
+ spin_lock_irqsave(&wdata->state.lock, flags);
+ wiiproto_req_rumble(wdata, value);
+ spin_unlock_irqrestore(&wdata->state.lock, flags);
+
+ return 0;
+}
+
+static int wiimod_pro_probe(const struct wiimod_ops *ops,
+ struct wiimote_data *wdata)
+{
+ int ret, i;
+
+ wdata->extension.input = input_allocate_device();
+ if (!wdata->extension.input)
+ return -ENOMEM;
+
+ set_bit(FF_RUMBLE, wdata->extension.input->ffbit);
+ input_set_drvdata(wdata->extension.input, wdata);
+
+ if (input_ff_create_memless(wdata->extension.input, NULL,
+ wiimod_pro_play)) {
+ ret = -ENOMEM;
+ goto err_free;
+ }
+
+ wdata->extension.input->open = wiimod_pro_open;
+ wdata->extension.input->close = wiimod_pro_close;
+ wdata->extension.input->dev.parent = &wdata->hdev->dev;
+ wdata->extension.input->id.bustype = wdata->hdev->bus;
+ wdata->extension.input->id.vendor = wdata->hdev->vendor;
+ wdata->extension.input->id.product = wdata->hdev->product;
+ wdata->extension.input->id.version = wdata->hdev->version;
+ wdata->extension.input->name = WIIMOTE_NAME " Pro Controller";
+
+ set_bit(EV_KEY, wdata->extension.input->evbit);
+ for (i = 0; i < WIIMOD_PRO_KEY_NUM; ++i)
+ set_bit(wiimod_pro_map[i],
+ wdata->extension.input->keybit);
+
+ set_bit(EV_ABS, wdata->extension.input->evbit);
+ set_bit(ABS_X, wdata->extension.input->absbit);
+ set_bit(ABS_Y, wdata->extension.input->absbit);
+ set_bit(ABS_RX, wdata->extension.input->absbit);
+ set_bit(ABS_RY, wdata->extension.input->absbit);
+ input_set_abs_params(wdata->extension.input,
+ ABS_X, -0x800, 0x800, 2, 4);
+ input_set_abs_params(wdata->extension.input,
+ ABS_Y, -0x800, 0x800, 2, 4);
+ input_set_abs_params(wdata->extension.input,
+ ABS_RX, -0x800, 0x800, 2, 4);
+ input_set_abs_params(wdata->extension.input,
+ ABS_RY, -0x800, 0x800, 2, 4);
+
+ ret = input_register_device(wdata->extension.input);
+ if (ret)
+ goto err_free;
+
+ return 0;
+
+err_free:
+ input_free_device(wdata->extension.input);
+ wdata->extension.input = NULL;
+ return ret;
+}
+
+static void wiimod_pro_remove(const struct wiimod_ops *ops,
+ struct wiimote_data *wdata)
+{
+ unsigned long flags;
+
+ if (!wdata->extension.input)
+ return;
+
+ spin_lock_irqsave(&wdata->state.lock, flags);
+ wiiproto_req_rumble(wdata, 0);
+ spin_unlock_irqrestore(&wdata->state.lock, flags);
+
+ input_unregister_device(wdata->extension.input);
+ wdata->extension.input = NULL;
+}
+
+static const struct wiimod_ops wiimod_pro = {
+ .flags = WIIMOD_FLAG_EXT16,
+ .arg = 0,
+ .probe = wiimod_pro_probe,
+ .remove = wiimod_pro_remove,
+ .in_ext = wiimod_pro_in_ext,
+};
+
+/*
+ * Builtin Motion Plus
+ * This module simply sets the WIIPROTO_FLAG_BUILTIN_MP protocol flag which
+ * disables polling for Motion-Plus. This should be set only for devices which
+ * don't allow MP hotplugging.
+ */
+
+static int wiimod_builtin_mp_probe(const struct wiimod_ops *ops,
+ struct wiimote_data *wdata)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&wdata->state.lock, flags);
+ wdata->state.flags |= WIIPROTO_FLAG_BUILTIN_MP;
+ spin_unlock_irqrestore(&wdata->state.lock, flags);
+
+ return 0;
+}
+
+static void wiimod_builtin_mp_remove(const struct wiimod_ops *ops,
+ struct wiimote_data *wdata)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&wdata->state.lock, flags);
+ wdata->state.flags |= WIIPROTO_FLAG_BUILTIN_MP;
+ spin_unlock_irqrestore(&wdata->state.lock, flags);
+}
+
+static const struct wiimod_ops wiimod_builtin_mp = {
+ .flags = 0,
+ .arg = 0,
+ .probe = wiimod_builtin_mp_probe,
+ .remove = wiimod_builtin_mp_remove,
+};
+
+/*
+ * No Motion Plus
+ * This module simply sets the WIIPROTO_FLAG_NO_MP protocol flag which
+ * disables motion-plus. This is needed for devices that advertise this but we
+ * don't know how to use it (or whether it is actually present).
+ */
+
+static int wiimod_no_mp_probe(const struct wiimod_ops *ops,
+ struct wiimote_data *wdata)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&wdata->state.lock, flags);
+ wdata->state.flags |= WIIPROTO_FLAG_NO_MP;
+ spin_unlock_irqrestore(&wdata->state.lock, flags);
+
+ return 0;
+}
+
+static void wiimod_no_mp_remove(const struct wiimod_ops *ops,
+ struct wiimote_data *wdata)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&wdata->state.lock, flags);
+ wdata->state.flags |= WIIPROTO_FLAG_NO_MP;
+ spin_unlock_irqrestore(&wdata->state.lock, flags);
+}
+
+static const struct wiimod_ops wiimod_no_mp = {
+ .flags = 0,
+ .arg = 0,
+ .probe = wiimod_no_mp_probe,
+ .remove = wiimod_no_mp_remove,
+};
+
+/*
+ * Motion Plus
+ * The Motion Plus extension provides rotation sensors (gyro) as a small
+ * extension device for Wii Remotes. Many devices have them built-in so
+ * you cannot see them from the outside.
+ * Motion Plus extensions are special because they are on a separate extension
+ * port and allow other extensions to be used simultaneously. This is all
+ * handled by the Wiimote Core so we don't have to deal with it.
+ */
+
+static void wiimod_mp_in_mp(struct wiimote_data *wdata, const __u8 *ext)
+{
+ __s32 x, y, z;
+
+ /* | 8 7 6 5 4 3 | 2 | 1 |
+ * -----+------------------------------+-----+-----+
+ * 1 | Yaw Speed <7:0> |
+ * 2 | Roll Speed <7:0> |
+ * 3 | Pitch Speed <7:0> |
+ * -----+------------------------------+-----+-----+
+ * 4 | Yaw Speed <13:8> | Yaw |Pitch|
+ * -----+------------------------------+-----+-----+
+ * 5 | Roll Speed <13:8> |Roll | Ext |
+ * -----+------------------------------+-----+-----+
+ * 6 | Pitch Speed <13:8> | 1 | 0 |
+ * -----+------------------------------+-----+-----+
+ * The single bits Yaw, Roll, Pitch in the lower right corner specify
+ * whether the wiimote is rotating fast (0) or slow (1). Speed for slow
+ * roation is 440 deg/s and for fast rotation 2000 deg/s. To get a
+ * linear scale we multiply by 2000/440 = ~4.5454 which is 18 for fast
+ * and 9 for slow.
+ * If the wiimote is not rotating the sensor reports 2^13 = 8192.
+ * Ext specifies whether an extension is connected to the motionp.
+ * which is parsed by wiimote-core.
+ */
+
+ x = ext[0];
+ y = ext[1];
+ z = ext[2];
+
+ x |= (((__u16)ext[3]) << 6) & 0xff00;
+ y |= (((__u16)ext[4]) << 6) & 0xff00;
+ z |= (((__u16)ext[5]) << 6) & 0xff00;
+
+ x -= 8192;
+ y -= 8192;
+ z -= 8192;
+
+ if (!(ext[3] & 0x02))
+ x *= 18;
+ else
+ x *= 9;
+ if (!(ext[4] & 0x02))
+ y *= 18;
+ else
+ y *= 9;
+ if (!(ext[3] & 0x01))
+ z *= 18;
+ else
+ z *= 9;
+
+ input_report_abs(wdata->mp, ABS_RX, x);
+ input_report_abs(wdata->mp, ABS_RY, y);
+ input_report_abs(wdata->mp, ABS_RZ, z);
+ input_sync(wdata->mp);
+}
+
+static int wiimod_mp_open(struct input_dev *dev)
+{
+ struct wiimote_data *wdata = input_get_drvdata(dev);
+ unsigned long flags;
+
+ spin_lock_irqsave(&wdata->state.lock, flags);
+ wdata->state.flags |= WIIPROTO_FLAG_MP_USED;
+ wiiproto_req_drm(wdata, WIIPROTO_REQ_NULL);
+ __wiimote_schedule(wdata);
+ spin_unlock_irqrestore(&wdata->state.lock, flags);
+
+ return 0;
+}
+
+static void wiimod_mp_close(struct input_dev *dev)
+{
+ struct wiimote_data *wdata = input_get_drvdata(dev);
+ unsigned long flags;
+
+ spin_lock_irqsave(&wdata->state.lock, flags);
+ wdata->state.flags &= ~WIIPROTO_FLAG_MP_USED;
+ wiiproto_req_drm(wdata, WIIPROTO_REQ_NULL);
+ __wiimote_schedule(wdata);
+ spin_unlock_irqrestore(&wdata->state.lock, flags);
+}
+
+static int wiimod_mp_probe(const struct wiimod_ops *ops,
+ struct wiimote_data *wdata)
+{
+ int ret;
+
+ wdata->mp = input_allocate_device();
+ if (!wdata->mp)
+ return -ENOMEM;
+
+ input_set_drvdata(wdata->mp, wdata);
+ wdata->mp->open = wiimod_mp_open;
+ wdata->mp->close = wiimod_mp_close;
+ wdata->mp->dev.parent = &wdata->hdev->dev;
+ wdata->mp->id.bustype = wdata->hdev->bus;
+ wdata->mp->id.vendor = wdata->hdev->vendor;
+ wdata->mp->id.product = wdata->hdev->product;
+ wdata->mp->id.version = wdata->hdev->version;
+ wdata->mp->name = WIIMOTE_NAME " Motion Plus";
+
+ set_bit(EV_ABS, wdata->mp->evbit);
+ set_bit(ABS_RX, wdata->mp->absbit);
+ set_bit(ABS_RY, wdata->mp->absbit);
+ set_bit(ABS_RZ, wdata->mp->absbit);
+ input_set_abs_params(wdata->mp,
+ ABS_RX, -16000, 16000, 4, 8);
+ input_set_abs_params(wdata->mp,
+ ABS_RY, -16000, 16000, 4, 8);
+ input_set_abs_params(wdata->mp,
+ ABS_RZ, -16000, 16000, 4, 8);
+
+ ret = input_register_device(wdata->mp);
+ if (ret)
+ goto err_free;
+
+ return 0;
+
+err_free:
+ input_free_device(wdata->mp);
+ wdata->mp = NULL;
+ return ret;
+}
+
+static void wiimod_mp_remove(const struct wiimod_ops *ops,
+ struct wiimote_data *wdata)
+{
+ if (!wdata->mp)
+ return;
+
+ input_unregister_device(wdata->mp);
+ wdata->mp = NULL;
+}
+
+const struct wiimod_ops wiimod_mp = {
+ .flags = 0,
+ .arg = 0,
+ .probe = wiimod_mp_probe,
+ .remove = wiimod_mp_remove,
+ .in_mp = wiimod_mp_in_mp,
+};
+
+/* module table */
+
+static const struct wiimod_ops wiimod_dummy;
+
+const struct wiimod_ops *wiimod_table[WIIMOD_NUM] = {
+ [WIIMOD_KEYS] = &wiimod_keys,
+ [WIIMOD_RUMBLE] = &wiimod_rumble,
+ [WIIMOD_BATTERY] = &wiimod_battery,
+ [WIIMOD_LED1] = &wiimod_leds[0],
+ [WIIMOD_LED2] = &wiimod_leds[1],
+ [WIIMOD_LED3] = &wiimod_leds[2],
+ [WIIMOD_LED4] = &wiimod_leds[3],
+ [WIIMOD_ACCEL] = &wiimod_accel,
+ [WIIMOD_IR] = &wiimod_ir,
+ [WIIMOD_BUILTIN_MP] = &wiimod_builtin_mp,
+ [WIIMOD_NO_MP] = &wiimod_no_mp,
+};
+
+const struct wiimod_ops *wiimod_ext_table[WIIMOTE_EXT_NUM] = {
+ [WIIMOTE_EXT_NONE] = &wiimod_dummy,
+ [WIIMOTE_EXT_UNKNOWN] = &wiimod_dummy,
+ [WIIMOTE_EXT_NUNCHUK] = &wiimod_nunchuk,
+ [WIIMOTE_EXT_CLASSIC_CONTROLLER] = &wiimod_classic,
+ [WIIMOTE_EXT_BALANCE_BOARD] = &wiimod_bboard,
+ [WIIMOTE_EXT_PRO_CONTROLLER] = &wiimod_pro,
+};
diff --git a/drivers/hid/hid-wiimote.h b/drivers/hid/hid-wiimote.h
index c81dbeb086c5..f1474f372c0b 100644
--- a/drivers/hid/hid-wiimote.h
+++ b/drivers/hid/hid-wiimote.h
@@ -2,8 +2,8 @@
#define __HID_WIIMOTE_H
/*
- * HID driver for Nintendo Wiimote devices
- * Copyright (c) 2011 David Herrmann
+ * HID driver for Nintendo Wii / Wii U peripherals
+ * Copyright (c) 2011-2013 David Herrmann <dh.herrmann@gmail.com>
*/
/*
@@ -22,6 +22,7 @@
#include <linux/mutex.h>
#include <linux/power_supply.h>
#include <linux/spinlock.h>
+#include <linux/timer.h>
#define WIIMOTE_NAME "Nintendo Wii Remote"
#define WIIMOTE_BUFSIZE 32
@@ -35,6 +36,17 @@
#define WIIPROTO_FLAG_IR_BASIC 0x40
#define WIIPROTO_FLAG_IR_EXT 0x80
#define WIIPROTO_FLAG_IR_FULL 0xc0 /* IR_BASIC | IR_EXT */
+#define WIIPROTO_FLAG_EXT_PLUGGED 0x0100
+#define WIIPROTO_FLAG_EXT_USED 0x0200
+#define WIIPROTO_FLAG_EXT_ACTIVE 0x0400
+#define WIIPROTO_FLAG_MP_PLUGGED 0x0800
+#define WIIPROTO_FLAG_MP_USED 0x1000
+#define WIIPROTO_FLAG_MP_ACTIVE 0x2000
+#define WIIPROTO_FLAG_EXITING 0x4000
+#define WIIPROTO_FLAG_DRM_LOCKED 0x8000
+#define WIIPROTO_FLAG_BUILTIN_MP 0x010000
+#define WIIPROTO_FLAG_NO_MP 0x020000
+
#define WIIPROTO_FLAGS_LEDS (WIIPROTO_FLAG_LED1 | WIIPROTO_FLAG_LED2 | \
WIIPROTO_FLAG_LED3 | WIIPROTO_FLAG_LED4)
#define WIIPROTO_FLAGS_IR (WIIPROTO_FLAG_IR_BASIC | WIIPROTO_FLAG_IR_EXT | \
@@ -43,16 +55,71 @@
/* return flag for led \num */
#define WIIPROTO_FLAG_LED(num) (WIIPROTO_FLAG_LED1 << (num - 1))
+enum wiiproto_keys {
+ WIIPROTO_KEY_LEFT,
+ WIIPROTO_KEY_RIGHT,
+ WIIPROTO_KEY_UP,
+ WIIPROTO_KEY_DOWN,
+ WIIPROTO_KEY_PLUS,
+ WIIPROTO_KEY_MINUS,
+ WIIPROTO_KEY_ONE,
+ WIIPROTO_KEY_TWO,
+ WIIPROTO_KEY_A,
+ WIIPROTO_KEY_B,
+ WIIPROTO_KEY_HOME,
+ WIIPROTO_KEY_COUNT
+};
+
+enum wiimote_devtype {
+ WIIMOTE_DEV_PENDING,
+ WIIMOTE_DEV_UNKNOWN,
+ WIIMOTE_DEV_GENERIC,
+ WIIMOTE_DEV_GEN10,
+ WIIMOTE_DEV_GEN20,
+ WIIMOTE_DEV_BALANCE_BOARD,
+ WIIMOTE_DEV_PRO_CONTROLLER,
+ WIIMOTE_DEV_NUM,
+};
+
+enum wiimote_exttype {
+ WIIMOTE_EXT_NONE,
+ WIIMOTE_EXT_UNKNOWN,
+ WIIMOTE_EXT_NUNCHUK,
+ WIIMOTE_EXT_CLASSIC_CONTROLLER,
+ WIIMOTE_EXT_BALANCE_BOARD,
+ WIIMOTE_EXT_PRO_CONTROLLER,
+ WIIMOTE_EXT_NUM,
+};
+
+enum wiimote_mptype {
+ WIIMOTE_MP_NONE,
+ WIIMOTE_MP_UNKNOWN,
+ WIIMOTE_MP_SINGLE,
+ WIIMOTE_MP_PASSTHROUGH_NUNCHUK,
+ WIIMOTE_MP_PASSTHROUGH_CLASSIC,
+};
+
struct wiimote_buf {
__u8 data[HID_MAX_BUFFER_SIZE];
size_t size;
};
+struct wiimote_queue {
+ spinlock_t lock;
+ struct work_struct worker;
+ __u8 head;
+ __u8 tail;
+ struct wiimote_buf outq[WIIMOTE_BUFSIZE];
+};
+
struct wiimote_state {
spinlock_t lock;
- __u8 flags;
+ __u32 flags;
__u8 accel_split[2];
__u8 drm;
+ __u8 devtype;
+ __u8 exttype;
+ __u8 mp;
/* synchronous cmd requests */
struct mutex sync;
@@ -65,6 +132,9 @@ struct wiimote_state {
__u8 cmd_err;
__u8 *cmd_read_buf;
__u8 cmd_read_size;
+
+ /* calibration data */
+ __u16 calib_bboard[4][3];
};
struct wiimote_data {
@@ -74,18 +144,63 @@ struct wiimote_data {
struct input_dev *accel;
struct input_dev *ir;
struct power_supply battery;
- struct wiimote_ext *ext;
+ struct input_dev *mp;
+ struct timer_list timer;
struct wiimote_debug *debug;
- spinlock_t qlock;
- __u8 head;
- __u8 tail;
- struct wiimote_buf outq[WIIMOTE_BUFSIZE];
- struct work_struct worker;
+ union {
+ struct input_dev *input;
+ } extension;
+ struct wiimote_queue queue;
struct wiimote_state state;
+ struct work_struct init_worker;
+};
+
+/* wiimote modules */
+
+enum wiimod_module {
+ WIIMOD_KEYS,
+ WIIMOD_RUMBLE,
+ WIIMOD_BATTERY,
+ WIIMOD_LED1,
+ WIIMOD_LED2,
+ WIIMOD_LED3,
+ WIIMOD_LED4,
+ WIIMOD_ACCEL,
+ WIIMOD_IR,
+ WIIMOD_BUILTIN_MP,
+ WIIMOD_NO_MP,
+ WIIMOD_NUM,
+ WIIMOD_NULL = WIIMOD_NUM,
+};
+
+#define WIIMOD_FLAG_INPUT 0x0001
+#define WIIMOD_FLAG_EXT8 0x0002
+#define WIIMOD_FLAG_EXT16 0x0004
+
+struct wiimod_ops {
+ __u16 flags;
+ unsigned long arg;
+ int (*probe) (const struct wiimod_ops *ops,
+ struct wiimote_data *wdata);
+ void (*remove) (const struct wiimod_ops *ops,
+ struct wiimote_data *wdata);
+
+ void (*in_keys) (struct wiimote_data *wdata, const __u8 *keys);
+ void (*in_accel) (struct wiimote_data *wdata, const __u8 *accel);
+ void (*in_ir) (struct wiimote_data *wdata, const __u8 *ir, bool packed,
+ unsigned int id);
+ void (*in_mp) (struct wiimote_data *wdata, const __u8 *mp);
+ void (*in_ext) (struct wiimote_data *wdata, const __u8 *ext);
};
+extern const struct wiimod_ops *wiimod_table[WIIMOD_NUM];
+extern const struct wiimod_ops *wiimod_ext_table[WIIMOTE_EXT_NUM];
+extern const struct wiimod_ops wiimod_mp;
+
+/* wiimote requests */
+
enum wiiproto_reqs {
WIIPROTO_REQ_NULL = 0x0,
WIIPROTO_REQ_RUMBLE = 0x10,
@@ -99,24 +214,55 @@ enum wiiproto_reqs {
WIIPROTO_REQ_STATUS = 0x20,
WIIPROTO_REQ_DATA = 0x21,
WIIPROTO_REQ_RETURN = 0x22,
+
+ /* DRM_K: BB*2 */
WIIPROTO_REQ_DRM_K = 0x30,
+
+ /* DRM_KA: BB*2 AA*3 */
WIIPROTO_REQ_DRM_KA = 0x31,
+
+ /* DRM_KE: BB*2 EE*8 */
WIIPROTO_REQ_DRM_KE = 0x32,
+
+ /* DRM_KAI: BB*2 AA*3 II*12 */
WIIPROTO_REQ_DRM_KAI = 0x33,
+
+ /* DRM_KEE: BB*2 EE*19 */
WIIPROTO_REQ_DRM_KEE = 0x34,
+
+ /* DRM_KAE: BB*2 AA*3 EE*16 */
WIIPROTO_REQ_DRM_KAE = 0x35,
+
+ /* DRM_KIE: BB*2 II*10 EE*9 */
WIIPROTO_REQ_DRM_KIE = 0x36,
+
+ /* DRM_KAIE: BB*2 AA*3 II*10 EE*6 */
WIIPROTO_REQ_DRM_KAIE = 0x37,
+
+ /* DRM_E: EE*21 */
WIIPROTO_REQ_DRM_E = 0x3d,
+
+ /* DRM_SKAI1: BB*2 AA*1 II*18 */
WIIPROTO_REQ_DRM_SKAI1 = 0x3e,
+
+ /* DRM_SKAI2: BB*2 AA*1 II*18 */
WIIPROTO_REQ_DRM_SKAI2 = 0x3f,
+
WIIPROTO_REQ_MAX
};
#define dev_to_wii(pdev) hid_get_drvdata(container_of(pdev, struct hid_device, \
dev))
+void __wiimote_schedule(struct wiimote_data *wdata);
+
extern void wiiproto_req_drm(struct wiimote_data *wdata, __u8 drm);
+extern void wiiproto_req_rumble(struct wiimote_data *wdata, __u8 rumble);
+extern void wiiproto_req_leds(struct wiimote_data *wdata, int leds);
+extern void wiiproto_req_status(struct wiimote_data *wdata);
+extern void wiiproto_req_accel(struct wiimote_data *wdata, __u8 accel);
+extern void wiiproto_req_ir1(struct wiimote_data *wdata, __u8 flags);
+extern void wiiproto_req_ir2(struct wiimote_data *wdata, __u8 flags);
extern int wiimote_cmd_write(struct wiimote_data *wdata, __u32 offset,
const __u8 *wmem, __u8 size);
extern ssize_t wiimote_cmd_read(struct wiimote_data *wdata, __u32 offset,
@@ -129,24 +275,6 @@ extern ssize_t wiimote_cmd_read(struct wiimote_data *wdata, __u32 offset,
extern void wiiproto_req_rmem(struct wiimote_data *wdata, bool eeprom,
__u32 offset, __u16 size);
-#ifdef CONFIG_HID_WIIMOTE_EXT
-
-extern int wiiext_init(struct wiimote_data *wdata);
-extern void wiiext_deinit(struct wiimote_data *wdata);
-extern void wiiext_event(struct wiimote_data *wdata, bool plugged);
-extern bool wiiext_active(struct wiimote_data *wdata);
-extern void wiiext_handle(struct wiimote_data *wdata, const __u8 *payload);
-
-#else
-
-static inline int wiiext_init(void *u) { return 0; }
-static inline void wiiext_deinit(void *u) { }
-static inline void wiiext_event(void *u, bool p) { }
-static inline bool wiiext_active(void *u) { return false; }
-static inline void wiiext_handle(void *u, const __u8 *p) { }
-
-#endif
-
#ifdef CONFIG_DEBUG_FS
extern int wiidebug_init(struct wiimote_data *wdata);
@@ -173,11 +301,26 @@ static inline void wiimote_cmd_complete(struct wiimote_data *wdata)
complete(&wdata->state.ready);
}
+/* requires the state.lock spinlock to be held */
+static inline void wiimote_cmd_abort(struct wiimote_data *wdata)
+{
+ /* Abort synchronous request by waking up the sleeping caller. But
+ * reset the state.cmd field to an invalid value so no further event
+ * handlers will work with it. */
+ wdata->state.cmd = WIIPROTO_REQ_MAX;
+ complete(&wdata->state.ready);
+}
+
static inline int wiimote_cmd_acquire(struct wiimote_data *wdata)
{
return mutex_lock_interruptible(&wdata->state.sync) ? -ERESTARTSYS : 0;
}
+static inline void wiimote_cmd_acquire_noint(struct wiimote_data *wdata)
+{
+ mutex_lock(&wdata->state.sync);
+}
+
/* requires the state.lock spinlock to be held */
static inline void wiimote_cmd_set(struct wiimote_data *wdata, int cmd,
__u32 opt)
@@ -196,11 +339,31 @@ static inline int wiimote_cmd_wait(struct wiimote_data *wdata)
{
int ret;
+ /* The completion acts as implicit memory barrier so we can safely
+ * assume that state.cmd is set on success/failure and isn't accessed
+ * by any other thread, anymore. */
+
ret = wait_for_completion_interruptible_timeout(&wdata->state.ready, HZ);
if (ret < 0)
return -ERESTARTSYS;
else if (ret == 0)
return -EIO;
+ else if (wdata->state.cmd != WIIPROTO_REQ_NULL)
+ return -EIO;
+ else
+ return 0;
+}
+
+static inline int wiimote_cmd_wait_noint(struct wiimote_data *wdata)
+{
+ unsigned long ret;
+
+ /* no locking needed; see wiimote_cmd_wait() */
+ ret = wait_for_completion_timeout(&wdata->state.ready, HZ);
+ if (!ret)
+ return -EIO;
+ else if (wdata->state.cmd != WIIPROTO_REQ_NULL)
+ return -EIO;
else
return 0;
}
diff --git a/drivers/hid/i2c-hid/i2c-hid.c b/drivers/hid/i2c-hid/i2c-hid.c
index 2b1799a3b212..879b0ed701a3 100644
--- a/drivers/hid/i2c-hid/i2c-hid.c
+++ b/drivers/hid/i2c-hid/i2c-hid.c
@@ -108,6 +108,7 @@ static const struct i2c_hid_cmd hid_reset_cmd = { I2C_HID_CMD(0x01),
static const struct i2c_hid_cmd hid_get_report_cmd = { I2C_HID_CMD(0x02) };
static const struct i2c_hid_cmd hid_set_report_cmd = { I2C_HID_CMD(0x03) };
static const struct i2c_hid_cmd hid_set_power_cmd = { I2C_HID_CMD(0x08) };
+static const struct i2c_hid_cmd hid_no_cmd = { .length = 0 };
/*
* These definitions are not used here, but are defined by the spec.
@@ -259,8 +260,11 @@ static int i2c_hid_set_report(struct i2c_client *client, u8 reportType,
{
struct i2c_hid *ihid = i2c_get_clientdata(client);
u8 *args = ihid->argsbuf;
+ const struct i2c_hid_cmd * hidcmd = &hid_set_report_cmd;
int ret;
u16 dataRegister = le16_to_cpu(ihid->hdesc.wDataRegister);
+ u16 outputRegister = le16_to_cpu(ihid->hdesc.wOutputRegister);
+ u16 maxOutputLength = le16_to_cpu(ihid->hdesc.wMaxOutputLength);
/* hidraw already checked that data_len < HID_MAX_BUFFER_SIZE */
u16 size = 2 /* size */ +
@@ -278,8 +282,18 @@ static int i2c_hid_set_report(struct i2c_client *client, u8 reportType,
reportID = 0x0F;
}
- args[index++] = dataRegister & 0xFF;
- args[index++] = dataRegister >> 8;
+ /*
+ * use the data register for feature reports or if the device does not
+ * support the output register
+ */
+ if (reportType == 0x03 || maxOutputLength == 0) {
+ args[index++] = dataRegister & 0xFF;
+ args[index++] = dataRegister >> 8;
+ } else {
+ args[index++] = outputRegister & 0xFF;
+ args[index++] = outputRegister >> 8;
+ hidcmd = &hid_no_cmd;
+ }
args[index++] = size & 0xFF;
args[index++] = size >> 8;
@@ -289,7 +303,7 @@ static int i2c_hid_set_report(struct i2c_client *client, u8 reportType,
memcpy(&args[index], buf, data_len);
- ret = __i2c_hid_command(client, &hid_set_report_cmd, reportID,
+ ret = __i2c_hid_command(client, hidcmd, reportID,
reportType, args, args_len, NULL, 0);
if (ret) {
dev_err(&client->dev, "failed to set a report to device.\n");
diff --git a/include/uapi/linux/input.h b/include/uapi/linux/input.h
index 4649ee35b605..d584047b072b 100644
--- a/include/uapi/linux/input.h
+++ b/include/uapi/linux/input.h
@@ -506,11 +506,15 @@ struct input_keymap_entry {
#define BTN_DEAD 0x12f
#define BTN_GAMEPAD 0x130
-#define BTN_A 0x130
-#define BTN_B 0x131
+#define BTN_SOUTH 0x130
+#define BTN_A BTN_SOUTH
+#define BTN_EAST 0x131
+#define BTN_B BTN_EAST
#define BTN_C 0x132
-#define BTN_X 0x133
-#define BTN_Y 0x134
+#define BTN_NORTH 0x133
+#define BTN_X BTN_NORTH
+#define BTN_WEST 0x134
+#define BTN_Y BTN_WEST
#define BTN_Z 0x135
#define BTN_TL 0x136
#define BTN_TR 0x137
@@ -707,6 +711,11 @@ struct input_keymap_entry {
#define KEY_ATTENDANT_TOGGLE 0x21d /* Attendant call on or off */
#define KEY_LIGHTS_TOGGLE 0x21e /* Reading light on or off */
+#define BTN_DPAD_UP 0x220
+#define BTN_DPAD_DOWN 0x221
+#define BTN_DPAD_LEFT 0x222
+#define BTN_DPAD_RIGHT 0x223
+
#define BTN_TRIGGER_HAPPY 0x2c0
#define BTN_TRIGGER_HAPPY1 0x2c0
#define BTN_TRIGGER_HAPPY2 0x2c1
diff --git a/net/bluetooth/hidp/core.c b/net/bluetooth/hidp/core.c
index 940f5acb6694..46c6a148f0b3 100644
--- a/net/bluetooth/hidp/core.c
+++ b/net/bluetooth/hidp/core.c
@@ -851,6 +851,29 @@ static void hidp_session_dev_del(struct hidp_session *session)
}
/*
+ * Asynchronous device registration
+ * HID device drivers might want to perform I/O during initialization to
+ * detect device types. Therefore, call device registration in a separate
+ * worker so the HIDP thread can schedule I/O operations.
+ * Note that this must be called after the worker thread was initialized
+ * successfully. This will then add the devices and increase session state
+ * on success, otherwise it will terminate the session thread.
+ */
+static void hidp_session_dev_work(struct work_struct *work)
+{
+ struct hidp_session *session = container_of(work,
+ struct hidp_session,
+ dev_init);
+ int ret;
+
+ ret = hidp_session_dev_add(session);
+ if (!ret)
+ atomic_inc(&session->state);
+ else
+ hidp_session_terminate(session);
+}
+
+/*
* Create new session object
* Allocate session object, initialize static fields, copy input data into the
* object and take a reference to all sub-objects.
@@ -897,6 +920,7 @@ static int hidp_session_new(struct hidp_session **out, const bdaddr_t *bdaddr,
session->idle_to = req->idle_to;
/* device management */
+ INIT_WORK(&session->dev_init, hidp_session_dev_work);
setup_timer(&session->timer, hidp_idle_timeout,
(unsigned long)session);
@@ -1035,8 +1059,8 @@ static void hidp_session_terminate(struct hidp_session *session)
* Probe HIDP session
* This is called from the l2cap_conn core when our l2cap_user object is bound
* to the hci-connection. We get the session via the \user object and can now
- * start the session thread, register the HID/input devices and link it into
- * the global session list.
+ * start the session thread, link it into the global session list and
+ * schedule HID/input device registration.
* The global session-list owns its own reference to the session object so you
* can drop your own reference after registering the l2cap_user object.
*/
@@ -1058,21 +1082,30 @@ static int hidp_session_probe(struct l2cap_conn *conn,
goto out_unlock;
}
+ if (session->input) {
+ ret = hidp_session_dev_add(session);
+ if (ret)
+ goto out_unlock;
+ }
+
ret = hidp_session_start_sync(session);
if (ret)
- goto out_unlock;
+ goto out_del;
- ret = hidp_session_dev_add(session);
- if (ret)
- goto out_stop;
+ /* HID device registration is async to allow I/O during probe */
+ if (session->input)
+ atomic_inc(&session->state);
+ else
+ schedule_work(&session->dev_init);
hidp_session_get(session);
list_add(&session->list, &hidp_session_list);
ret = 0;
goto out_unlock;
-out_stop:
- hidp_session_terminate(session);
+out_del:
+ if (session->input)
+ hidp_session_dev_del(session);
out_unlock:
up_write(&hidp_session_sem);
return ret;
@@ -1102,7 +1135,12 @@ static void hidp_session_remove(struct l2cap_conn *conn,
down_write(&hidp_session_sem);
hidp_session_terminate(session);
- hidp_session_dev_del(session);
+
+ cancel_work_sync(&session->dev_init);
+ if (session->input ||
+ atomic_read(&session->state) > HIDP_SESSION_PREPARING)
+ hidp_session_dev_del(session);
+
list_del(&session->list);
up_write(&hidp_session_sem);
diff --git a/net/bluetooth/hidp/hidp.h b/net/bluetooth/hidp/hidp.h
index 6162ce8606ac..9e6cc3553105 100644
--- a/net/bluetooth/hidp/hidp.h
+++ b/net/bluetooth/hidp/hidp.h
@@ -128,6 +128,7 @@ int hidp_get_conninfo(struct hidp_conninfo *ci);
enum hidp_session_state {
HIDP_SESSION_IDLING,
+ HIDP_SESSION_PREPARING,
HIDP_SESSION_RUNNING,
};
@@ -156,6 +157,7 @@ struct hidp_session {
unsigned long idle_to;
/* device management */
+ struct work_struct dev_init;
struct input_dev *input;
struct hid_device *hid;
struct timer_list timer;