diff options
| -rw-r--r-- | Documentation/devicetree/bindings/net/fsl-fec.txt | 1 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/net/mdio.yaml | 6 | ||||
| -rw-r--r-- | drivers/net/ethernet/freescale/fec_main.c | 11 |
3 files changed, 15 insertions, 3 deletions
diff --git a/Documentation/devicetree/bindings/net/fsl-fec.txt b/Documentation/devicetree/bindings/net/fsl-fec.txt index ff8b0f211aa1..26c492a2e0e1 100644 --- a/Documentation/devicetree/bindings/net/fsl-fec.txt +++ b/Documentation/devicetree/bindings/net/fsl-fec.txt @@ -82,6 +82,7 @@ ethernet@83fec000 { phy-supply = <®_fec_supply>; phy-handle = <ðphy>; mdio { + clock-frequency = <5000000>; ethphy: ethernet-phy@6 { compatible = "ethernet-phy-ieee802.3-c22"; reg = <6>; diff --git a/Documentation/devicetree/bindings/net/mdio.yaml b/Documentation/devicetree/bindings/net/mdio.yaml index 50c3397a82bc..ab4a9df8b8e2 100644 --- a/Documentation/devicetree/bindings/net/mdio.yaml +++ b/Documentation/devicetree/bindings/net/mdio.yaml @@ -39,6 +39,12 @@ properties: and must therefore be appropriately determined based on all PHY requirements (maximum value of all per-PHY RESET pulse widths). + clock-frequency: + description: + Desired MDIO bus clock frequency in Hz. Values greater than IEEE 802.3 + defined 2.5MHz should only be used when all devices on the bus support + the given clock speed. + patternProperties: "^ethernet-phy@[0-9a-f]+$": type: object diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c index 2267bf75784e..832a24e2805c 100644 --- a/drivers/net/ethernet/freescale/fec_main.c +++ b/drivers/net/ethernet/freescale/fec_main.c @@ -2067,6 +2067,7 @@ static int fec_enet_mii_init(struct platform_device *pdev) struct device_node *node; int err = -ENXIO; u32 mii_speed, holdtime; + u32 bus_freq; /* * The i.MX28 dual fec interfaces are not equal. @@ -2094,15 +2095,20 @@ static int fec_enet_mii_init(struct platform_device *pdev) return -ENOENT; } + bus_freq = 2500000; /* 2.5MHz by default */ + node = of_get_child_by_name(pdev->dev.of_node, "mdio"); + if (node) + of_property_read_u32(node, "clock-frequency", &bus_freq); + /* - * Set MII speed to 2.5 MHz (= clk_get_rate() / 2 * phy_speed) + * Set MII speed (= clk_get_rate() / 2 * phy_speed) * * The formula for FEC MDC is 'ref_freq / (MII_SPEED x 2)' while * for ENET-MAC is 'ref_freq / ((MII_SPEED + 1) x 2)'. The i.MX28 * Reference Manual has an error on this, and gets fixed on i.MX6Q * document. */ - mii_speed = DIV_ROUND_UP(clk_get_rate(fep->clk_ipg), 5000000); + mii_speed = DIV_ROUND_UP(clk_get_rate(fep->clk_ipg), bus_freq * 2); if (fep->quirks & FEC_QUIRK_ENET_MAC) mii_speed--; if (mii_speed > 63) { @@ -2148,7 +2154,6 @@ static int fec_enet_mii_init(struct platform_device *pdev) fep->mii_bus->priv = fep; fep->mii_bus->parent = &pdev->dev; - node = of_get_child_by_name(pdev->dev.of_node, "mdio"); err = of_mdiobus_register(fep->mii_bus, node); of_node_put(node); if (err) |