diff options
59 files changed, 1198 insertions, 686 deletions
diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt index 9201a7d8d7b0..540c65ed9cba 100644 --- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt +++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt @@ -15,6 +15,7 @@ Required properties: "fsl,imx6q-usdhc" "fsl,imx6sl-usdhc" "fsl,imx6sx-usdhc" + "fsl,imx6ull-usdhc" "fsl,imx7d-usdhc" "fsl,imx8qxp-usdhc" diff --git a/Documentation/devicetree/bindings/mmc/mmc.txt b/Documentation/devicetree/bindings/mmc/mmc.txt index f5a0923b34ca..cdbcfd3a4ff2 100644 --- a/Documentation/devicetree/bindings/mmc/mmc.txt +++ b/Documentation/devicetree/bindings/mmc/mmc.txt @@ -62,6 +62,8 @@ Optional properties: be referred to mmc-pwrseq-simple.txt. But now it's reused as a tunable delay waiting for I/O signalling and card power supply to be stable, regardless of whether pwrseq-simple is used. Default to 10ms if no available. +- supports-cqe : The presence of this property indicates that the corresponding + MMC host controller supports HW command queue feature. *NOTE* on CD and WP polarity. To use common for all SD/MMC host controllers line polarity properties, we have to fix the meaning of the "normal" and "inverted" diff --git a/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt b/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt index 32b4b4e41923..2cecdc71d94c 100644 --- a/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt +++ b/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt @@ -39,12 +39,16 @@ sdhci@c8000200 { bus-width = <8>; }; -Optional properties for Tegra210 and Tegra186: +Optional properties for Tegra210, Tegra186 and Tegra194: - pinctrl-names, pinctrl-0, pinctrl-1 : Specify pad voltage configurations. Valid pinctrl-names are "sdmmc-3v3" and "sdmmc-1v8" for controllers supporting multiple voltage levels. The order of names should correspond to the pin configuration states in pinctrl-0 and pinctrl-1. +- pinctrl-names : "sdmmc-3v3-drv" and "sdmmc-1v8-drv" are applicable for + Tegra210 where pad config registers are in the pinmux register domain + for pull-up-strength and pull-down-strength values configuration when + using pads at 3V3 and 1V8 levels. - nvidia,only-1-8-v : The presence of this property indicates that the controller operates at a 1.8 V fixed I/O voltage. - nvidia,pad-autocal-pull-up-offset-3v3, diff --git a/Documentation/devicetree/bindings/mmc/ti-omap.txt b/Documentation/devicetree/bindings/mmc/ti-omap.txt index 8de579969763..02fd31cf361d 100644 --- a/Documentation/devicetree/bindings/mmc/ti-omap.txt +++ b/Documentation/devicetree/bindings/mmc/ti-omap.txt @@ -24,31 +24,3 @@ Examples: dmas = <&sdma 61 &sdma 62>; dma-names = "tx", "rx"; }; - -* TI MMC host controller for OMAP1 and 2420 - -The MMC Host Controller on TI OMAP1 and 2420 family provides -an interface for MMC, SD, and SDIO types of memory cards. - -This file documents differences between the core properties described -by mmc.txt and the properties used by the omap mmc driver. - -Note that this driver will not work with omap2430 or later omaps, -please see the omap hsmmc driver for the current omaps. - -Required properties: -- compatible: Must be "ti,omap2420-mmc", for OMAP2420 controllers -- ti,hwmods: For 2420, must be "msdi<n>", where n is controller - instance starting 1 - -Examples: - - msdi1: mmc@4809c000 { - compatible = "ti,omap2420-mmc"; - ti,hwmods = "msdi1"; - reg = <0x4809c000 0x80>; - interrupts = <83>; - dmas = <&sdma 61 &sdma 62>; - dma-names = "tx", "rx"; - }; - diff --git a/MAINTAINERS b/MAINTAINERS index f1050734d909..84857bc78a61 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -13616,11 +13616,18 @@ F: drivers/mmc/host/sdhci-brcmstb* SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) DRIVER M: Adrian Hunter <adrian.hunter@intel.com> L: linux-mmc@vger.kernel.org -T: git git://git.infradead.org/users/ahunter/linux-sdhci.git S: Maintained F: drivers/mmc/host/sdhci* F: include/linux/mmc/sdhci* +EMMC CMDQ HOST CONTROLLER INTERFACE (CQHCI) DRIVER +M: Adrian Hunter <adrian.hunter@intel.com> +M: Ritesh Harjani <riteshh@codeaurora.org> +M: Asutosh Das <asutoshd@codeaurora.org> +L: linux-mmc@vger.kernel.org +S: Maintained +F: drivers/mmc/host/cqhci* + SYNOPSYS SDHCI COMPLIANT DWC MSHC DRIVER M: Prabu Thangamuthu <prabu.t@synopsys.com> M: Manjunath M B <manjumb@synopsys.com> diff --git a/drivers/mmc/core/Makefile b/drivers/mmc/core/Makefile index abba078f7f49..95ffe008ebdf 100644 --- a/drivers/mmc/core/Makefile +++ b/drivers/mmc/core/Makefile @@ -8,7 +8,7 @@ mmc_core-y := core.o bus.o host.o \ mmc.o mmc_ops.o sd.o sd_ops.o \ sdio.o sdio_ops.o sdio_bus.o \ sdio_cis.o sdio_io.o sdio_irq.o \ - slot-gpio.o + slot-gpio.o regulator.o mmc_core-$(CONFIG_OF) += pwrseq.o obj-$(CONFIG_PWRSEQ_SIMPLE) += pwrseq_simple.o obj-$(CONFIG_PWRSEQ_SD8787) += pwrseq_sd8787.o diff --git a/drivers/mmc/core/block.c b/drivers/mmc/core/block.c index 9ce8eb51a60f..2c71a434c915 100644 --- a/drivers/mmc/core/block.c +++ b/drivers/mmc/core/block.c @@ -1124,7 +1124,7 @@ static void mmc_blk_issue_discard_rq(struct mmc_queue *mq, struct request *req) { struct mmc_blk_data *md = mq->blkdata; struct mmc_card *card = md->queue.card; - unsigned int from, nr, arg; + unsigned int from, nr; int err = 0, type = MMC_BLK_DISCARD; blk_status_t status = BLK_STS_OK; @@ -1136,24 +1136,18 @@ static void mmc_blk_issue_discard_rq(struct mmc_queue *mq, struct request *req) from = blk_rq_pos(req); nr = blk_rq_sectors(req); - if (mmc_can_discard(card)) - arg = MMC_DISCARD_ARG; - else if (mmc_can_trim(card)) - arg = MMC_TRIM_ARG; - else - arg = MMC_ERASE_ARG; do { err = 0; if (card->quirks & MMC_QUIRK_INAND_CMD38) { err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, INAND_CMD38_ARG_EXT_CSD, - arg == MMC_TRIM_ARG ? + card->erase_arg == MMC_TRIM_ARG ? INAND_CMD38_ARG_TRIM : INAND_CMD38_ARG_ERASE, 0); } if (!err) - err = mmc_erase(card, from, nr, arg); + err = mmc_erase(card, from, nr, card->erase_arg); } while (err == -EIO && !mmc_blk_reset(md, card->host, type)); if (err) status = BLK_STS_IOERR; @@ -2768,8 +2762,8 @@ static int mmc_dbg_card_status_get(void *data, u64 *val) return ret; } -DEFINE_SIMPLE_ATTRIBUTE(mmc_dbg_card_status_fops, mmc_dbg_card_status_get, - NULL, "%08llx\n"); +DEFINE_DEBUGFS_ATTRIBUTE(mmc_dbg_card_status_fops, mmc_dbg_card_status_get, + NULL, "%08llx\n"); /* That is two digits * 512 + 1 for newline */ #define EXT_CSD_STR_LEN 1025 @@ -2857,8 +2851,9 @@ static int mmc_blk_add_debugfs(struct mmc_card *card, struct mmc_blk_data *md) if (mmc_card_mmc(card) || mmc_card_sd(card)) { md->status_dentry = - debugfs_create_file("status", S_IRUSR, root, card, - &mmc_dbg_card_status_fops); + debugfs_create_file_unsafe("status", 0400, root, + card, + &mmc_dbg_card_status_fops); if (!md->status_dentry) return -EIO; } diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index b27a1e620233..6db36dc870b5 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -21,7 +21,6 @@ #include <linux/leds.h> #include <linux/scatterlist.h> #include <linux/log2.h> -#include <linux/regulator/consumer.h> #include <linux/pm_runtime.h> #include <linux/pm_wakeup.h> #include <linux/suspend.h> @@ -52,6 +51,7 @@ /* The max erase timeout, used when host->max_busy_timeout isn't specified */ #define MMC_ERASE_TIMEOUT_MS (60 * 1000) /* 60 s */ +#define SD_DISCARD_TIMEOUT_MS (250) static const unsigned freqs[] = { 400000, 300000, 200000, 100000 }; @@ -758,33 +758,6 @@ void mmc_set_data_timeout(struct mmc_data *data, const struct mmc_card *card) } EXPORT_SYMBOL(mmc_set_data_timeout); -/** - * mmc_align_data_size - pads a transfer size to a more optimal value - * @card: the MMC card associated with the data transfer - * @sz: original transfer size - * - * Pads the original data size with a number of extra bytes in - * order to avoid controller bugs and/or performance hits - * (e.g. some controllers revert to PIO for certain sizes). - * - * Returns the improved size, which might be unmodified. - * - * Note that this function is only relevant when issuing a - * single scatter gather entry. - */ -unsigned int mmc_align_data_size(struct mmc_card *card, unsigned int sz) -{ - /* - * FIXME: We don't have a system for the controller to tell - * the core about its problems yet, so for now we just 32-bit - * align the size. - */ - sz = ((sz + 3) / 4) * 4; - - return sz; -} -EXPORT_SYMBOL(mmc_align_data_size); - /* * Allow claiming an already claimed host if the context is the same or there is * no context but the task is the same. @@ -1112,55 +1085,6 @@ u32 mmc_vddrange_to_ocrmask(int vdd_min, int vdd_max) return mask; } -EXPORT_SYMBOL(mmc_vddrange_to_ocrmask); - -#ifdef CONFIG_OF - -/** - * mmc_of_parse_voltage - return mask of supported voltages - * @np: The device node need to be parsed. - * @mask: mask of voltages available for MMC/SD/SDIO - * - * Parse the "voltage-ranges" DT property, returning zero if it is not - * found, negative errno if the voltage-range specification is invalid, - * or one if the voltage-range is specified and successfully parsed. - */ -int mmc_of_parse_voltage(struct device_node *np, u32 *mask) -{ - const u32 *voltage_ranges; - int num_ranges, i; - - voltage_ranges = of_get_property(np, "voltage-ranges", &num_ranges); - num_ranges = num_ranges / sizeof(*voltage_ranges) / 2; - if (!voltage_ranges) { - pr_debug("%pOF: voltage-ranges unspecified\n", np); - return 0; - } - if (!num_ranges) { - pr_err("%pOF: voltage-ranges empty\n", np); - return -EINVAL; - } - - for (i = 0; i < num_ranges; i++) { - const int j = i * 2; - u32 ocr_mask; - - ocr_mask = mmc_vddrange_to_ocrmask( - be32_to_cpu(voltage_ranges[j]), - be32_to_cpu(voltage_ranges[j + 1])); - if (!ocr_mask) { - pr_err("%pOF: voltage-range #%d is invalid\n", - np, i); - return -EINVAL; - } - *mask |= ocr_mask; - } - - return 1; -} -EXPORT_SYMBOL(mmc_of_parse_voltage); - -#endif /* CONFIG_OF */ static int mmc_of_get_func_num(struct device_node *node) { @@ -1190,246 +1114,6 @@ struct device_node *mmc_of_find_child_device(struct mmc_host *host, return NULL; } -#ifdef CONFIG_REGULATOR - -/** - * mmc_ocrbitnum_to_vdd - Convert a OCR bit number to its voltage - * @vdd_bit: OCR bit number - * @min_uV: minimum voltage value (mV) - * @max_uV: maximum voltage value (mV) - * - * This function returns the voltage range according to the provided OCR - * bit number. If conversion is not possible a negative errno value returned. - */ -static int mmc_ocrbitnum_to_vdd(int vdd_bit, int *min_uV, int *max_uV) -{ - int tmp; - - if (!vdd_bit) - return -EINVAL; - - /* - * REVISIT mmc_vddrange_to_ocrmask() may have set some - * bits this regulator doesn't quite support ... don't - * be too picky, most cards and regulators are OK with - * a 0.1V range goof (it's a small error percentage). - */ - tmp = vdd_bit - ilog2(MMC_VDD_165_195); - if (tmp == 0) { - *min_uV = 1650 * 1000; - *max_uV = 1950 * 1000; - } else { - *min_uV = 1900 * 1000 + tmp * 100 * 1000; - *max_uV = *min_uV + 100 * 1000; - } - - return 0; -} - -/** - * mmc_regulator_get_ocrmask - return mask of supported voltages - * @supply: regulator to use - * - * This returns either a negative errno, or a mask of voltages that - * can be provided to MMC/SD/SDIO devices using the specified voltage - * regulator. This would normally be called before registering the - * MMC host adapter. - */ -int mmc_regulator_get_ocrmask(struct regulator *supply) -{ - int result = 0; - int count; - int i; - int vdd_uV; - int vdd_mV; - - count = regulator_count_voltages(supply); - if (count < 0) - return count; - - for (i = 0; i < count; i++) { - vdd_uV = regulator_list_voltage(supply, i); - if (vdd_uV <= 0) - continue; - - vdd_mV = vdd_uV / 1000; - result |= mmc_vddrange_to_ocrmask(vdd_mV, vdd_mV); - } - - if (!result) { - vdd_uV = regulator_get_voltage(supply); - if (vdd_uV <= 0) - return vdd_uV; - - vdd_mV = vdd_uV / 1000; - result = mmc_vddrange_to_ocrmask(vdd_mV, vdd_mV); - } - - return result; -} -EXPORT_SYMBOL_GPL(mmc_regulator_get_ocrmask); - -/** - * mmc_regulator_set_ocr - set regulator to match host->ios voltage - * @mmc: the host to regulate - * @supply: regulator to use - * @vdd_bit: zero for power off, else a bit number (host->ios.vdd) - * - * Returns zero on success, else negative errno. - * - * MMC host drivers may use this to enable or disable a regulator using - * a particular supply voltage. This would normally be called from the - * set_ios() method. - */ -int mmc_regulator_set_ocr(struct mmc_host *mmc, - struct regulator *supply, - unsigned short vdd_bit) -{ - int result = 0; - int min_uV, max_uV; - - if (vdd_bit) { - mmc_ocrbitnum_to_vdd(vdd_bit, &min_uV, &max_uV); - - result = regulator_set_voltage(supply, min_uV, max_uV); - if (result == 0 && !mmc->regulator_enabled) { - result = regulator_enable(supply); - if (!result) - mmc->regulator_enabled = true; - } - } else if (mmc->regulator_enabled) { - result = regulator_disable(supply); - if (result == 0) - mmc->regulator_enabled = false; - } - - if (result) - dev_err(mmc_dev(mmc), - "could not set regulator OCR (%d)\n", result); - return result; -} -EXPORT_SYMBOL_GPL(mmc_regulator_set_ocr); - -static int mmc_regulator_set_voltage_if_supported(struct regulator *regulator, - int min_uV, int target_uV, - int max_uV) -{ - /* - * Check if supported first to avoid errors since we may try several - * signal levels during power up and don't want to show errors. - */ - if (!regulator_is_supported_voltage(regulator, min_uV, max_uV)) - return -EINVAL; - - return regulator_set_voltage_triplet(regulator, min_uV, target_uV, - max_uV); -} - -/** - * mmc_regulator_set_vqmmc - Set VQMMC as per the ios - * - * For 3.3V signaling, we try to match VQMMC to VMMC as closely as possible. - * That will match the behavior of old boards where VQMMC and VMMC were supplied - * by the same supply. The Bus Operating conditions for 3.3V signaling in the - * SD card spec also define VQMMC in terms of VMMC. - * If this is not possible we'll try the full 2.7-3.6V of the spec. - * - * For 1.2V and 1.8V signaling we'll try to get as close as possible to the - * requested voltage. This is definitely a good idea for UHS where there's a - * separate regulator on the card that's trying to make 1.8V and it's best if - * we match. - * - * This function is expected to be used by a controller's - * start_signal_voltage_switch() function. - */ -int mmc_regulator_set_vqmmc(struct mmc_host *mmc, struct mmc_ios *ios) -{ - struct device *dev = mmc_dev(mmc); - int ret, volt, min_uV, max_uV; - - /* If no vqmmc supply then we can't change the voltage */ - if (IS_ERR(mmc->supply.vqmmc)) - return -EINVAL; - - switch (ios->signal_voltage) { - case MMC_SIGNAL_VOLTAGE_120: - return mmc_regulator_set_voltage_if_supported(mmc->supply.vqmmc, - 1100000, 1200000, 1300000); - case MMC_SIGNAL_VOLTAGE_180: - return mmc_regulator_set_voltage_if_supported(mmc->supply.vqmmc, - 1700000, 1800000, 1950000); - case MMC_SIGNAL_VOLTAGE_330: - ret = mmc_ocrbitnum_to_vdd(mmc->ios.vdd, &volt, &max_uV); - if (ret < 0) - return ret; - - dev_dbg(dev, "%s: found vmmc voltage range of %d-%duV\n", - __func__, volt, max_uV); - - min_uV = max(volt - 300000, 2700000); - max_uV = min(max_uV + 200000, 3600000); - - /* - * Due to a limitation in the current implementation of - * regulator_set_voltage_triplet() which is taking the lowest - * voltage possible if below the target, search for a suitable - * voltage in two steps and try to stay close to vmmc - * with a 0.3V tolerance at first. - */ - if (!mmc_regulator_set_voltage_if_supported(mmc->supply.vqmmc, - min_uV, volt, max_uV)) - return 0; - - return mmc_regulator_set_voltage_if_supported(mmc->supply.vqmmc, - 2700000, volt, 3600000); - default: - return -EINVAL; - } -} -EXPORT_SYMBOL_GPL(mmc_regulator_set_vqmmc); - -#endif /* CONFIG_REGULATOR */ - -/** - * mmc_regulator_get_supply - try to get VMMC and VQMMC regulators for a host - * @mmc: the host to regulate - * - * Returns 0 or errno. errno should be handled, it is either a critical error - * or -EPROBE_DEFER. 0 means no critical error but it does not mean all - * regulators have been found because they all are optional. If you require - * certain regulators, you need to check separately in your driver if they got - * populated after calling this function. - */ -int mmc_regulator_get_supply(struct mmc_host *mmc) -{ - struct device *dev = mmc_dev(mmc); - int ret; - - mmc->supply.vmmc = devm_regulator_get_optional(dev, "vmmc"); - mmc->supply.vqmmc = devm_regulator_get_optional(dev, "vqmmc"); - - if (IS_ERR(mmc->supply.vmmc)) { - if (PTR_ERR(mmc->supply.vmmc) == -EPROBE_DEFER) - return -EPROBE_DEFER; - dev_dbg(dev, "No vmmc regulator found\n"); - } else { - ret = mmc_regulator_get_ocrmask(mmc->supply.vmmc); - if (ret > 0) - mmc->ocr_avail = ret; - else - dev_warn(dev, "Failed getting OCR mask: %d\n", ret); - } - - if (IS_ERR(mmc->supply.vqmmc)) { - if (PTR_ERR(mmc->supply.vqmmc) == -EPROBE_DEFER) - return -EPROBE_DEFER; - dev_dbg(dev, "No vqmmc regulator found\n"); - } - - return 0; -} -EXPORT_SYMBOL_GPL(mmc_regulator_get_supply); - /* * Mask off any voltages we don't support and select * the lowest voltage @@ -1936,6 +1620,12 @@ static unsigned int mmc_sd_erase_timeout(struct mmc_card *card, { unsigned int erase_timeout; + /* for DISCARD none of the below calculation applies. + * the busy timeout is 250msec per discard command. + */ + if (arg == SD_DISCARD_ARG) + return SD_DISCARD_TIMEOUT_MS; + if (card->ssr.erase_timeout) { /* Erase timeout specified in SD Status Register (SSR) */ erase_timeout = card->ssr.erase_timeout * qty + @@ -2164,7 +1854,7 @@ static unsigned int mmc_align_erase_size(struct mmc_card *card, * @card: card to erase * @from: first sector to erase * @nr: number of sectors to erase - * @arg: erase command argument (SD supports only %MMC_ERASE_ARG) + * @arg: erase command argument * * Caller must claim host before calling this function. */ @@ -2181,14 +1871,14 @@ int mmc_erase(struct mmc_card *card, unsigned int from, unsigned int nr, if (!card->erase_size) return -EOPNOTSUPP; - if (mmc_card_sd(card) && arg != MMC_ERASE_ARG) + if (mmc_card_sd(card) && arg != SD_ERASE_ARG && arg != SD_DISCARD_ARG) return -EOPNOTSUPP; - if ((arg & MMC_SECURE_ARGS) && + if (mmc_card_mmc(card) && (arg & MMC_SECURE_ARGS) && !(card->ext_csd.sec_feature_support & EXT_CSD_SEC_ER_EN)) return -EOPNOTSUPP; - if ((arg & MMC_TRIM_ARGS) && + if (mmc_card_mmc(card) && (arg & MMC_TRIM_ARGS) && !(card->ext_csd.sec_feature_support & EXT_CSD_SEC_GB_CL_EN)) return -EOPNOTSUPP; @@ -2381,9 +2071,9 @@ unsigned int mmc_calc_max_discard(struct mmc_card *card) return card->pref_erase; max_discard = mmc_do_calc_max_discard(card, MMC_ERASE_ARG); - if (max_discard && mmc_can_trim(card)) { + if (mmc_can_trim(card)) { max_trim = mmc_do_calc_max_discard(card, MMC_TRIM_ARG); - if (max_trim < max_discard) + if (max_trim < max_discard || max_discard == 0) max_discard = max_trim; } else if (max_discard < card->erase_size) { max_discard = 0; diff --git a/drivers/mmc/core/core.h b/drivers/mmc/core/core.h index 8fb6bc37f808..b5083b13d594 100644 --- a/drivers/mmc/core/core.h +++ b/drivers/mmc/core/core.h @@ -59,6 +59,7 @@ void mmc_power_up(struct mmc_host *host, u32 ocr); void mmc_power_off(struct mmc_host *host); void mmc_power_cycle(struct mmc_host *host, u32 ocr); void mmc_set_initial_state(struct mmc_host *host); +u32 mmc_vddrange_to_ocrmask(int vdd_min, int vdd_max); static inline void mmc_delay(unsigned int ms) { diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c index cf58ccaf22d5..3a4402a79904 100644 --- a/drivers/mmc/core/host.c +++ b/drivers/mmc/core/host.c @@ -194,7 +194,7 @@ int mmc_of_parse(struct mmc_host *host) switch (bus_width) { case 8: host->caps |= MMC_CAP_8_BIT_DATA; - /* Hosts capable of 8-bit transfers can also do 4 bits */ + /* fall through - Hosts capable of 8-bit can also do 4 bits */ case 4: host->caps |= MMC_CAP_4_BIT_DATA; break; @@ -260,7 +260,7 @@ int mmc_of_parse(struct mmc_host *host) /* Parse Write Protection */ ro_cap_invert = device_property_read_bool(dev, "wp-inverted"); - ret = mmc_gpiod_request_ro(host, "wp", 0, false, 0, &ro_gpio_invert); + ret = mmc_gpiod_request_ro(host, "wp", 0, 0, &ro_gpio_invert); if (!ret) dev_info(host->parent, "Got WP GPIO\n"); else if (ret != -ENOENT && ret != -ENOSYS) @@ -349,6 +349,50 @@ int mmc_of_parse(struct mmc_host *host) EXPORT_SYMBOL(mmc_of_parse); /** + * mmc_of_parse_voltage - return mask of supported voltages + * @np: The device node need to be parsed. + * @mask: mask of voltages available for MMC/SD/SDIO + * + * Parse the "voltage-ranges" DT property, returning zero if it is not + * found, negative errno if the voltage-range specification is invalid, + * or one if the voltage-range is specified and successfully parsed. + */ +int mmc_of_parse_voltage(struct device_node *np, u32 *mask) +{ + const u32 *voltage_ranges; + int num_ranges, i; + + voltage_ranges = of_get_property(np, "voltage-ranges", &num_ranges); + num_ranges = num_ranges / sizeof(*voltage_ranges) / 2; + if (!voltage_ranges) { + pr_debug("%pOF: voltage-ranges unspecified\n", np); + return 0; + } + if (!num_ranges) { + pr_err("%pOF: voltage-ranges empty\n", np); + return -EINVAL; + } + + for (i = 0; i < num_ranges; i++) { + const int j = i * 2; + u32 ocr_mask; + + ocr_mask = mmc_vddrange_to_ocrmask( + be32_to_cpu(voltage_ranges[j]), + be32_to_cpu(voltage_ranges[j + 1])); + if (!ocr_mask) { + pr_err("%pOF: voltage-range #%d is invalid\n", + np, i); + return -EINVAL; + } + *mask |= ocr_mask; + } + + return 1; +} +EXPORT_SYMBOL(mmc_of_parse_voltage); + +/** * mmc_alloc_host - initialise the per-host structure. * @extra: sizeof private data structure * @dev: pointer to host device model structure diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index da892a599524..3e786ba204c3 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -1594,6 +1594,8 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, if (oldcard) { if (memcmp(cid, oldcard->raw_cid, sizeof(cid)) != 0) { + pr_debug("%s: Perhaps the card was replaced\n", + mmc_hostname(host)); err = -ENOENT; goto err; } @@ -1743,6 +1745,14 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, card->ext_csd.power_off_notification = EXT_CSD_POWER_ON; } + /* set erase_arg */ + if (mmc_can_discard(card)) + card->erase_arg = MMC_DISCARD_ARG; + else if (mmc_can_trim(card)) + card->erase_arg = MMC_TRIM_ARG; + else + card->erase_arg = MMC_ERASE_ARG; + /* * Select timing interface */ diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c index 9054329fe903..c5208fb312ae 100644 --- a/drivers/mmc/core/mmc_ops.c +++ b/drivers/mmc/core/mmc_ops.c @@ -562,7 +562,7 @@ int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value, if (index == EXT_CSD_SANITIZE_START) cmd.sanitize_busy = true; - err = mmc_wait_for_cmd(host, &cmd, MMC_CMD_RETRIES); + err = mmc_wait_for_cmd(host, &cmd, 0); if (err) goto out; diff --git a/drivers/mmc/core/regulator.c b/drivers/mmc/core/regulator.c new file mode 100644 index 000000000000..b6febbcf8978 --- /dev/null +++ b/drivers/mmc/core/regulator.c @@ -0,0 +1,260 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Helper functions for MMC regulators. + */ + +#include <linux/device.h> +#include <linux/err.h> +#include <linux/log2.h> +#include <linux/regulator/consumer.h> + +#include <linux/mmc/host.h> + +#include "core.h" +#include "host.h" + +#ifdef CONFIG_REGULATOR + +/** + * mmc_ocrbitnum_to_vdd - Convert a OCR bit number to its voltage + * @vdd_bit: OCR bit number + * @min_uV: minimum voltage value (mV) + * @max_uV: maximum voltage value (mV) + * + * This function returns the voltage range according to the provided OCR + * bit number. If conversion is not possible a negative errno value returned. + */ +static int mmc_ocrbitnum_to_vdd(int vdd_bit, int *min_uV, int *max_uV) +{ + int tmp; + + if (!vdd_bit) + return -EINVAL; + + /* + * REVISIT mmc_vddrange_to_ocrmask() may have set some + * bits this regulator doesn't quite support ... don't + * be too picky, most cards and regulators are OK with + * a 0.1V range goof (it's a small error percentage). + */ + tmp = vdd_bit - ilog2(MMC_VDD_165_195); + if (tmp == 0) { + *min_uV = 1650 * 1000; + *max_uV = 1950 * 1000; + } else { + *min_uV = 1900 * 1000 + tmp * 100 * 1000; + *max_uV = *min_uV + 100 * 1000; + } + + return 0; +} + +/** + * mmc_regulator_get_ocrmask - return mask of supported voltages + * @supply: regulator to use + * + * This returns either a negative errno, or a mask of voltages that + * can be provided to MMC/SD/SDIO devices using the specified voltage + * regulator. This would normally be called before registering the + * MMC host adapter. + */ +static int mmc_regulator_get_ocrmask(struct regulator *supply) +{ + int result = 0; + int count; + int i; + int vdd_uV; + int vdd_mV; + + count = regulator_count_voltages(supply); + if (count < 0) + return count; + + for (i = 0; i < count; i++) { + vdd_uV = regulator_list_voltage(supply, i); + if (vdd_uV <= 0) + continue; + + vdd_mV = vdd_uV / 1000; + result |= mmc_vddrange_to_ocrmask(vdd_mV, vdd_mV); + } + + if (!result) { + vdd_uV = regulator_get_voltage(supply); + if (vdd_uV <= 0) + return vdd_uV; + + vdd_mV = vdd_uV / 1000; + result = mmc_vddrange_to_ocrmask(vdd_mV, vdd_mV); + } + + return result; +} + +/** + * mmc_regulator_set_ocr - set regulator to match host->ios voltage + * @mmc: the host to regulate + * @supply: regulator to use + * @vdd_bit: zero for power off, else a bit number (host->ios.vdd) + * + * Returns zero on success, else negative errno. + * + * MMC host drivers may use this to enable or disable a regulator using + * a particular supply voltage. This would normally be called from the + * set_ios() method. + */ +int mmc_regulator_set_ocr(struct mmc_host *mmc, + struct regulator *supply, + unsigned short vdd_bit) +{ + int result = 0; + int min_uV, max_uV; + + if (vdd_bit) { + mmc_ocrbitnum_to_vdd(vdd_bit, &min_uV, &max_uV); + + result = regulator_set_voltage(supply, min_uV, max_uV); + if (result == 0 && !mmc->regulator_enabled) { + result = regulator_enable(supply); + if (!result) + mmc->regulator_enabled = true; + } + } else if (mmc->regulator_enabled) { + result = regulator_disable(supply); + if (result == 0) + mmc->regulator_enabled = false; + } + + if (result) + dev_err(mmc_dev(mmc), + "could not set regulator OCR (%d)\n", result); + return result; +} +EXPORT_SYMBOL_GPL(mmc_regulator_set_ocr); + +static int mmc_regulator_set_voltage_if_supported(struct regulator *regulator, + int min_uV, int target_uV, + int max_uV) +{ + /* + * Check if supported first to avoid errors since we may try several + * signal levels during power up and don't want to show errors. + */ + if (!regulator_is_supported_voltage(regulator, min_uV, max_uV)) + return -EINVAL; + + return regulator_set_voltage_triplet(regulator, min_uV, target_uV, + max_uV); +} + +/** + * mmc_regulator_set_vqmmc - Set VQMMC as per the ios + * + * For 3.3V signaling, we try to match VQMMC to VMMC as closely as possible. + * That will match the behavior of old boards where VQMMC and VMMC were supplied + * by the same supply. The Bus Operating conditions for 3.3V signaling in the + * SD card spec also define VQMMC in terms of VMMC. + * If this is not possible we'll try the full 2.7-3.6V of the spec. + * + * For 1.2V and 1.8V signaling we'll try to get as close as possible to the + * requested voltage. This is definitely a good idea for UHS where there's a + * separate regulator on the card that's trying to make 1.8V and it's best if + * we match. + * + * This function is expected to be used by a controller's + * start_signal_voltage_switch() function. + */ +int mmc_regulator_set_vqmmc(struct mmc_host *mmc, struct mmc_ios *ios) +{ + struct device *dev = mmc_dev(mmc); + int ret, volt, min_uV, max_uV; + + /* If no vqmmc supply then we can't change the voltage */ + if (IS_ERR(mmc->supply.vqmmc)) + return -EINVAL; + + switch (ios->signal_voltage) { + case MMC_SIGNAL_VOLTAGE_120: + return mmc_regulator_set_voltage_if_supported(mmc->supply.vqmmc, + 1100000, 1200000, 1300000); + case MMC_SIGNAL_VOLTAGE_180: + return mmc_regulator_set_voltage_if_supported(mmc->supply.vqmmc, + 1700000, 1800000, 1950000); + case MMC_SIGNAL_VOLTAGE_330: + ret = mmc_ocrbitnum_to_vdd(mmc->ios.vdd, &volt, &max_uV); + if (ret < 0) + return ret; + + dev_dbg(dev, "%s: found vmmc voltage range of %d-%duV\n", + __func__, volt, max_uV); + + min_uV = max(volt - 300000, 2700000); + max_uV = min(max_uV + 200000, 3600000); + + /* + * Due to a limitation in the current implementation of + * regulator_set_voltage_triplet() which is taking the lowest + * voltage possible if below the target, search for a suitable + * voltage in two steps and try to stay close to vmmc + * with a 0.3V tolerance at first. + */ + if (!mmc_regulator_set_voltage_if_supported(mmc->supply.vqmmc, + min_uV, volt, max_uV)) + return 0; + + return mmc_regulator_set_voltage_if_supported(mmc->supply.vqmmc, + 2700000, volt, 3600000); + default: + return -EINVAL; + } +} +EXPORT_SYMBOL_GPL(mmc_regulator_set_vqmmc); + +#else + +static inline int mmc_regulator_get_ocrmask(struct regulator *supply) +{ + return 0; +} + +#endif /* CONFIG_REGULATOR */ + +/** + * mmc_regulator_get_supply - try to get VMMC and VQMMC regulators for a host + * @mmc: the host to regulate + * + * Returns 0 or errno. errno should be handled, it is either a critical error + * or -EPROBE_DEFER. 0 means no critical error but it does not mean all + * regulators have been found because they all are optional. If you require + * certain regulators, you need to check separately in your driver if they got + * populated after calling this function. + */ +int mmc_regulator_get_supply(struct mmc_host *mmc) +{ + struct device *dev = mmc_dev(mmc); + int ret; + + mmc->supply.vmmc = devm_regulator_get_optional(dev, "vmmc"); + mmc->supply.vqmmc = devm_regulator_get_optional(dev, "vqmmc"); + + if (IS_ERR(mmc->supply.vmmc)) { + if (PTR_ERR(mmc->supply.vmmc) == -EPROBE_DEFER) + return -EPROBE_DEFER; + dev_dbg(dev, "No vmmc regulator found\n"); + } else { + ret = mmc_regulator_get_ocrmask(mmc->supply.vmmc); + if (ret > 0) + mmc->ocr_avail = ret; + else + dev_warn(dev, "Failed getting OCR mask: %d\n", ret); + } + + if (IS_ERR(mmc->supply.vqmmc)) { + if (PTR_ERR(mmc->supply.vqmmc) == -EPROBE_DEFER) + return -EPROBE_DEFER; + dev_dbg(dev, "No vqmmc regulator found\n"); + } + + return 0; +} +EXPORT_SYMBOL_GPL(mmc_regulator_get_supply); diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c index d0d9f90e7cdf..265e1aeeb9d8 100644 --- a/drivers/mmc/core/sd.c +++ b/drivers/mmc/core/sd.c @@ -209,6 +209,11 @@ static int mmc_decode_scr(struct mmc_card *card) /* Check if Physical Layer Spec v3.0 is supported */ scr->sda_spec3 = UNSTUFF_BITS(resp, 47, 1); + if (scr->sda_spec3) { + scr->sda_spec4 = UNSTUFF_BITS(resp, 42, 1); + scr->sda_specx = UNSTUFF_BITS(resp, 38, 4); + } + if (UNSTUFF_BITS(resp, 55, 1)) card->erased_byte = 0xFF; else @@ -226,6 +231,8 @@ static int mmc_read_ssr(struct mmc_card *card) { unsigned int au, es, et, eo; __be32 *raw_ssr; + u32 resp[4] = {}; + u8 discard_support; int i; if (!(card->csd.cmdclass & CCC_APP_SPEC)) { @@ -271,6 +278,14 @@ static int mmc_read_ssr(struct mmc_card *card) } } + /* + * starting SD5.1 discard is supported if DISCARD_SUPPORT (b313) is set + */ + resp[3] = card->raw_ssr[6]; + discard_support = UNSTUFF_BITS(resp, 313 - 288, 1); + card->erase_arg = (card->scr.sda_specx && discard_support) ? + SD_DISCARD_ARG : SD_ERASE_ARG; + return 0; } @@ -936,8 +951,11 @@ retry: return err; if (oldcard) { - if (memcmp(cid, oldcard->raw_cid, sizeof(cid)) != 0) + if (memcmp(cid, oldcard->raw_cid, sizeof(cid)) != 0) { + pr_debug("%s: Perhaps the card was replaced\n", + mmc_hostname(host)); return -ENOENT; + } card = oldcard; } else { diff --git a/drivers/mmc/core/sd_ops.c b/drivers/mmc/core/sd_ops.c index 47056d8d1bac..0bb0b8419016 100644 --- a/drivers/mmc/core/sd_ops.c +++ b/drivers/mmc/core/sd_ops.c @@ -52,36 +52,17 @@ int mmc_app_cmd(struct mmc_host *host, struct mmc_card *card) } EXPORT_SYMBOL_GPL(mmc_app_cmd); -/** - * mmc_wait_for_app_cmd - start an application command and wait for - completion - * @host: MMC host to start command - * @card: Card to send MMC_APP_CMD to - * @cmd: MMC command to start - * @retries: maximum number of retries - * - * Sends a MMC_APP_CMD, checks the card response, sends the command - * in the parameter and waits for it to complete. Return any error - * that occurred while the command was executing. Do not attempt to - * parse the response. - */ -int mmc_wait_for_app_cmd(struct mmc_host *host, struct mmc_card *card, - struct mmc_command *cmd, int retries) +static int mmc_wait_for_app_cmd(struct mmc_host *host, struct mmc_card *card, + struct mmc_command *cmd) { struct mmc_request mrq = {}; - - int i, err; - - if (retries < 0) - retries = MMC_CMD_RETRIES; - - err = -EIO; + int i, err = -EIO; /* * We have to resend MMC_APP_CMD for each attempt so * we cannot use the retries field in mmc_command. */ - for (i = 0;i <= retries;i++) { + for (i = 0; i <= MMC_CMD_RETRIES; i++) { err = mmc_app_cmd(host, card); if (err) { /* no point in retrying; no APP commands allowed */ @@ -116,8 +97,6 @@ int mmc_wait_for_app_cmd(struct mmc_host *host, struct mmc_card *card, return err; } -EXPORT_SYMBOL(mmc_wait_for_app_cmd); - int mmc_app_set_bus_width(struct mmc_card *card, int width) { struct mmc_command cmd = {}; @@ -136,7 +115,7 @@ int mmc_app_set_bus_width(struct mmc_card *card, int width) return -EINVAL; } - return mmc_wait_for_app_cmd(card->host, card, &cmd, MMC_CMD_RETRIES); + return mmc_wait_for_app_cmd(card->host, card, &cmd); } int mmc_send_app_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr) @@ -152,7 +131,7 @@ int mmc_send_app_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr) cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R3 | MMC_CMD_BCR; for (i = 100; i; i--) { - err = mmc_wait_for_app_cmd(host, NULL, &cmd, MMC_CMD_RETRIES); + err = mmc_wait_for_app_cmd(host, NULL, &cmd); if (err) break; diff --git a/drivers/mmc/core/sd_ops.h b/drivers/mmc/core/sd_ops.h index 0e6c3d51e66d..ffaed5cacc88 100644 --- a/drivers/mmc/core/sd_ops.h +++ b/drivers/mmc/core/sd_ops.h @@ -16,7 +16,6 @@ struct mmc_card; struct mmc_host; -struct mmc_command; int mmc_app_set_bus_width(struct mmc_card *card, int width); int mmc_send_app_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr); @@ -27,8 +26,6 @@ int mmc_sd_switch(struct mmc_card *card, int mode, int group, u8 value, u8 *resp); int mmc_app_sd_status(struct mmc_card *card, void *ssr); int mmc_app_cmd(struct mmc_host *host, struct mmc_card *card); -int mmc_wait_for_app_cmd(struct mmc_host *host, struct mmc_card *card, - struct mmc_command *cmd, int retries); #endif diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c index d8e17ea6126d..6718fc8bb40f 100644 --- a/drivers/mmc/core/sdio.c +++ b/drivers/mmc/core/sdio.c @@ -617,6 +617,8 @@ try_again: if (oldcard && (oldcard->type != MMC_TYPE_SD_COMBO || memcmp(card->raw_cid, oldcard->raw_cid, sizeof(card->raw_cid)) != 0)) { mmc_remove_card(card); + pr_debug("%s: Perhaps the card was replaced\n", + mmc_hostname(host)); return -ENOENT; } } else { @@ -624,6 +626,8 @@ try_again: if (oldcard && oldcard->type != MMC_TYPE_SDIO) { mmc_remove_card(card); + pr_debug("%s: Perhaps the card was replaced\n", + mmc_hostname(host)); return -ENOENT; } } @@ -736,8 +740,11 @@ try_again: int same = (card->cis.vendor == oldcard->cis.vendor && card->cis.device == oldcard->cis.device); mmc_remove_card(card); - if (!same) + if (!same) { + pr_debug("%s: Perhaps the card was replaced\n", + mmc_hostname(host)); return -ENOENT; + } card = oldcard; } diff --git a/drivers/mmc/core/sdio_bus.c b/drivers/mmc/core/sdio_bus.c index b6d8203e46eb..62b0f5ecc7f7 100644 --- a/drivers/mmc/core/sdio_bus.c +++ b/drivers/mmc/core/sdio_bus.c @@ -179,7 +179,6 @@ static int sdio_bus_remove(struct device *dev) { struct sdio_driver *drv = to_sdio_driver(dev->driver); struct sdio_func *func = dev_to_sdio_func(dev); - int ret = 0; /* Make sure card is powered before invoking ->remove() */ if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD) @@ -205,7 +204,7 @@ static int sdio_bus_remove(struct device *dev) dev_pm_domain_detach(dev, false); - return ret; + return 0; } static const struct dev_pm_ops sdio_bus_pm_ops = { diff --git a/drivers/mmc/core/sdio_io.c b/drivers/mmc/core/sdio_io.c index d40744bbafa9..3f67fbbe0d75 100644 --- a/drivers/mmc/core/sdio_io.c +++ b/drivers/mmc/core/sdio_io.c @@ -10,6 +10,7 @@ */ #include <linux/export.h> +#include <linux/kernel.h> #include <linux/mmc/host.h> #include <linux/mmc/card.h> #include <linux/mmc/sdio.h> @@ -203,6 +204,21 @@ static inline unsigned int sdio_max_byte_size(struct sdio_func *func) return min(mval, 512u); /* maximum size for byte mode */ } +/* + * This is legacy code, which needs to be re-worked some day. Basically we need + * to take into account the properties of the host, as to enable the SDIO func + * driver layer to allocate optimal buffers. + */ +static inline unsigned int _sdio_align_size(unsigned int sz) +{ + /* + * FIXME: We don't have a system for the controller to tell + * the core about its problems yet, so for now we just 32-bit + * align the size. + */ + return ALIGN(sz, 4); +} + /** * sdio_align_size - pads a transfer size to a more optimal value * @func: SDIO function @@ -230,7 +246,7 @@ unsigned int sdio_align_size(struct sdio_func *func, unsigned int sz) * wants to increase the size up to a point where it * might need more than one block. */ - sz = mmc_align_data_size(func->card, sz); + sz = _sdio_align_size(sz); /* * If we can still do this with just a byte transfer, then @@ -252,7 +268,7 @@ unsigned int sdio_align_size(struct sdio_func *func, unsigned int sz) */ blk_sz = ((sz + func->cur_blksize - 1) / func->cur_blksize) * func->cur_blksize; - blk_sz = mmc_align_data_size(func->card, blk_sz); + blk_sz = _sdio_align_size(blk_sz); /* * This value is only good if it is still just @@ -265,8 +281,7 @@ unsigned int sdio_align_size(struct sdio_func *func, unsigned int sz) * We failed to do one request, but at least try to * pad the remainder properly. */ - byte_sz = mmc_align_data_size(func->card, - sz % func->cur_blksize); + byte_sz = _sdio_align_size(sz % func->cur_blksize); if (byte_sz <= sdio_max_byte_size(func)) { blk_sz = sz / func->cur_blksize; return blk_sz * func->cur_blksize + byte_sz; @@ -276,16 +291,14 @@ unsigned int sdio_align_size(struct sdio_func *func, unsigned int sz) * We need multiple requests, so first check that the * controller can handle the chunk size; */ - chunk_sz = mmc_align_data_size(func->card, - sdio_max_byte_size(func)); + chunk_sz = _sdio_align_size(sdio_max_byte_size(func)); if (chunk_sz == sdio_max_byte_size(func)) { /* * Fix up the size of the remainder (if any) */ byte_sz = orig_sz % chunk_sz; if (byte_sz) { - byte_sz = mmc_align_data_size(func->card, - byte_sz); + byte_sz = _sdio_align_size(byte_sz); } return (orig_sz / chunk_sz) * chunk_sz + byte_sz; diff --git a/drivers/mmc/core/sdio_ops.h b/drivers/mmc/core/sdio_ops.h index 96945cafbf0b..1f6d0447ea0f 100644 --- a/drivers/mmc/core/sdio_ops.h +++ b/drivers/mmc/core/sdio_ops.h @@ -25,7 +25,6 @@ int mmc_io_rw_direct(struct mmc_card *card, int write, unsigned fn, int mmc_io_rw_extended(struct mmc_card *card, int write, unsigned fn, unsigned addr, int incr_addr, u8 *buf, unsigned blocks, unsigned blksz); int sdio_reset(struct mmc_host *host); -unsigned int mmc_align_data_size(struct mmc_card *card, unsigned int sz); void sdio_irq_work(struct work_struct *work); static inline bool sdio_is_io_busy(u32 opcode, u32 arg) diff --git a/drivers/mmc/core/slot-gpio.c b/drivers/mmc/core/slot-gpio.c index 319ccd93383d..4afc6b87b465 100644 --- a/drivers/mmc/core/slot-gpio.c +++ b/drivers/mmc/core/slot-gpio.c @@ -22,7 +22,6 @@ struct mmc_gpio { struct gpio_desc *ro_gpio; struct gpio_desc *cd_gpio; - bool override_ro_active_level; bool override_cd_active_level; irqreturn_t (*cd_gpio_isr)(int irq, void *dev_id); char *ro_label; @@ -71,10 +70,6 @@ int mmc_gpio_get_ro(struct mmc_host *host) if (!ctx || !ctx->ro_gpio) return -ENOSYS; - if (ctx->override_ro_active_level) - return !gpiod_get_raw_value_cansleep(ctx->ro_gpio) ^ - !!(host->caps2 & MMC_CAP2_RO_ACTIVE_HIGH); - return gpiod_get_value_cansleep(ctx->ro_gpio); } EXPORT_SYMBOL(mmc_gpio_get_ro); @@ -225,7 +220,6 @@ EXPORT_SYMBOL(mmc_can_gpio_cd); * @host: mmc host * @con_id: function within the GPIO consumer * @idx: index of the GPIO to obtain in the consumer - * @override_active_level: ignore %GPIO_ACTIVE_LOW flag * @debounce: debounce time in microseconds * @gpio_invert: will return whether the GPIO line is inverted or not, * set to NULL to ignore @@ -233,7 +227,7 @@ EXPORT_SYMBOL(mmc_can_gpio_cd); * Returns zero on success, else an error. */ int mmc_gpiod_request_ro(struct mmc_host *host, const char *con_id, - unsigned int idx, bool override_active_level, + unsigned int idx, unsigned int debounce, bool *gpio_invert) { struct mmc_gpio *ctx = host->slot.handler_priv; @@ -253,7 +247,6 @@ int mmc_gpiod_request_ro(struct mmc_host *host, const char *con_id, if (gpio_invert) *gpio_invert = !gpiod_is_active_low(desc); - ctx->override_ro_active_level = override_active_level; ctx->ro_gpio = desc; return 0; diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index a44ec8bb5418..28fcd8f580a1 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -224,6 +224,7 @@ config MMC_SDHCI_ESDHC_IMX depends on ARCH_MXC depends on MMC_SDHCI_PLTFM select MMC_SDHCI_IO_ACCESSORS + select MMC_CQHCI help This selects the Freescale eSDHC/uSDHC controller support found on i.MX25, i.MX35 i.MX5x and i.MX6x. @@ -250,6 +251,7 @@ config MMC_SDHCI_TEGRA depends on ARCH_TEGRA depends on MMC_SDHCI_PLTFM select MMC_SDHCI_IO_ACCESSORS + select MMC_CQHCI help This selects the Tegra SD/MMC controller. If you have a Tegra platform with SD or MMC devices, say Y or M here. diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c index 47189f9ed4e2..735aa5871358 100644 --- a/drivers/mmc/host/atmel-mci.c +++ b/drivers/mmc/host/atmel-mci.c @@ -1410,6 +1410,9 @@ static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) case MMC_BUS_WIDTH_4: slot->sdc_reg |= ATMCI_SDCBUS_4BIT; break; + case MMC_BUS_WIDTH_8: + slot->sdc_reg |= ATMCI_SDCBUS_8BIT; + break; } if (ios->clock) { @@ -2275,8 +2278,11 @@ static int atmci_init_slot(struct atmel_mci *host, * use only one bit for data to prevent fifo underruns and overruns * which will corrupt data. */ - if ((slot_data->bus_width >= 4) && host->caps.has_rwproof) + if ((slot_data->bus_width >= 4) && host->caps.has_rwproof) { mmc->caps |= MMC_CAP_4_BIT_DATA; + if (slot_data->bus_width >= 8) + mmc->caps |= MMC_CAP_8_BIT_DATA; + } if (atmci_get_version(host) < 0x200) { mmc->max_segs = 256; diff --git a/drivers/mmc/host/bcm2835.c b/drivers/mmc/host/bcm2835.c index c9e7aa50bb0a..7e0d3a49c06d 100644 --- a/drivers/mmc/host/bcm2835.c +++ b/drivers/mmc/host/bcm2835.c @@ -148,7 +148,6 @@ struct bcm2835_host { void __iomem *ioaddr; u32 phys_addr; - struct mmc_host *mmc; struct platform_device *pdev; int clock; /* Current clock speed */ @@ -618,7 +617,7 @@ static void bcm2835_finish_request(struct bcm2835_host *host) "failed to terminate DMA (%d)\n", err); } - mmc_request_done(host->mmc, mrq); + mmc_request_done(mmc_from_priv(host), mrq); } static @@ -837,7 +836,7 @@ static void bcm2835_timeout(struct work_struct *work) dev_err(dev, "timeout waiting for hardware interrupt.\n"); bcm2835_dumpregs(host); - bcm2835_reset(host->mmc); + bcm2835_reset(mmc_from_priv(host)); if (host->data) { host->data->error = -ETIMEDOUT; @@ -1100,6 +1099,7 @@ static void bcm2835_dma_complete_work(struct work_struct *work) static void bcm2835_set_clock(struct bcm2835_host *host, unsigned int clock) { + struct mmc_host *mmc = mmc_from_priv(host); int div; /* The SDCDIV register has 11 bits, and holds (div - 2). But @@ -1143,18 +1143,18 @@ static void bcm2835_set_clock(struct bcm2835_host *host, unsigned int clock) div = SDCDIV_MAX_CDIV; clock = host->max_clk / (div + 2); - host->mmc->actual_clock = clock; + mmc->actual_clock = clock; /* Calibrate some delays */ host->ns_per_fifo_word = (1000000000 / clock) * - ((host->mmc->caps & MMC_CAP_4_BIT_DATA) ? 8 : 32); + ((mmc->caps & MMC_CAP_4_BIT_DATA) ? 8 : 32); host->cdiv = div; writel(host->cdiv, host->ioaddr + SDCDIV); /* Set the timeout to 500ms */ - writel(host->mmc->actual_clock / 2, host->ioaddr + SDTOUT); + writel(mmc->actual_clock / 2, host->ioaddr + SDTOUT); } static void bcm2835_request(struct mmc_host *mmc, struct mmc_request *mrq) @@ -1264,7 +1264,7 @@ static const struct mmc_host_ops bcm2835_ops = { static int bcm2835_add_host(struct bcm2835_host *host) { - struct mmc_host *mmc = host->mmc; + struct mmc_host *mmc = mmc_from_priv(host); struct device *dev = &host->pdev->dev; char pio_limit_string[20]; int ret; @@ -1286,7 +1286,7 @@ static int bcm2835_add_host(struct bcm2835_host *host) spin_lock_init(&host->lock); mutex_init(&host->mutex); - if (IS_ERR_OR_NULL(host->dma_chan_rxtx)) { + if (!host->dma_chan_rxtx) { dev_warn(dev, "unable to initialise DMA channel. Falling back to PIO\n"); host->use_dma = false; } else { @@ -1370,7 +1370,6 @@ static int bcm2835_probe(struct platform_device *pdev) mmc->ops = &bcm2835_ops; host = mmc_priv(mmc); - host->mmc = mmc; host->pdev = pdev; spin_lock_init(&host->lock); @@ -1441,8 +1440,9 @@ err: static int bcm2835_remove(struct platform_device *pdev) { struct bcm2835_host *host = platform_get_drvdata(pdev); + struct mmc_host *mmc = mmc_from_priv(host); - mmc_remove_host(host->mmc); + mmc_remove_host(mmc); writel(SDVDD_POWER_OFF, host->ioaddr + SDVDD); @@ -1454,8 +1454,7 @@ static int bcm2835_remove(struct platform_device *pdev) if (host->dma_chan_rxtx) dma_release_channel(host->dma_chan_rxtx); - mmc_free_host(host->mmc); - platform_set_drvdata(pdev, NULL); + mmc_free_host(mmc); return 0; } diff --git a/drivers/mmc/host/cb710-mmc.c b/drivers/mmc/host/cb710-mmc.c index 1087b4c79cd6..4c477dcd2ada 100644 --- a/drivers/mmc/host/cb710-mmc.c +++ b/drivers/mmc/host/cb710-mmc.c @@ -566,30 +566,32 @@ static void cb710_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) cb710_mmc_select_clock_divider(mmc, ios->clock); - if (ios->power_mode != reader->last_power_mode) - switch (ios->power_mode) { - case MMC_POWER_ON: - err = cb710_mmc_powerup(slot); - if (err) { - dev_warn(cb710_slot_dev(slot), - "powerup failed (%d)- retrying\n", err); - cb710_mmc_powerdown(slot); - udelay(1); + if (ios->power_mode != reader->last_power_mode) { + switch (ios->power_mode) { + case MMC_POWER_ON: err = cb710_mmc_powerup(slot); - if (err) + if (err) { dev_warn(cb710_slot_dev(slot), - "powerup retry failed (%d) - expect errors\n", + "powerup failed (%d)- retrying\n", err); + cb710_mmc_powerdown(slot); + udelay(1); + err = cb710_mmc_powerup(slot); + if (err) + dev_warn(cb710_slot_dev(slot), + "powerup retry failed (%d) - expect errors\n", err); + } + reader->last_power_mode = MMC_POWER_ON; + break; + case MMC_POWER_OFF: + cb710_mmc_powerdown(slot); + reader->last_power_mode = MMC_POWER_OFF; + break; + case MMC_POWER_UP: + default: + /* ignore */ + break; } - reader->last_power_mode = MMC_POWER_ON; - break; - case MMC_POWER_OFF: - cb710_mmc_powerdown(slot); - reader->last_power_mode = MMC_POWER_OFF; - break; - case MMC_POWER_UP: - default: - /* ignore */; } cb710_mmc_enable_4bit_data(slot, ios->bus_width != MMC_BUS_WIDTH_1); diff --git a/drivers/mmc/host/davinci_mmc.c b/drivers/mmc/host/davinci_mmc.c index 9e68c3645e22..49e0daf2ef5e 100644 --- a/drivers/mmc/host/davinci_mmc.c +++ b/drivers/mmc/host/davinci_mmc.c @@ -1193,7 +1193,7 @@ static int mmc_davinci_parse_pdata(struct mmc_host *mmc) else if (ret) mmc->caps |= MMC_CAP_NEEDS_POLL; - ret = mmc_gpiod_request_ro(mmc, "wp", 0, false, 0, NULL); + ret = mmc_gpiod_request_ro(mmc, "wp", 0, 0, NULL); if (ret == -EPROBE_DEFER) return ret; diff --git a/drivers/mmc/host/jz4740_mmc.c b/drivers/mmc/host/jz4740_mmc.c index 33215d66afa2..63303022669c 100644 --- a/drivers/mmc/host/jz4740_mmc.c +++ b/drivers/mmc/host/jz4740_mmc.c @@ -21,7 +21,6 @@ #include <linux/dmaengine.h> #include <linux/dma-mapping.h> #include <linux/err.h> -#include <linux/gpio/consumer.h> #include <linux/interrupt.h> #include <linux/io.h> #include <linux/irq.h> @@ -36,7 +35,6 @@ #include <asm/cacheflush.h> #include <asm/mach-jz4740/dma.h> -#include <asm/mach-jz4740/jz4740_mmc.h> #define JZ_REG_MMC_STRPCL 0x00 #define JZ_REG_MMC_STATUS 0x04 @@ -148,9 +146,7 @@ enum jz4780_cookie { struct jz4740_mmc_host { struct mmc_host *mmc; struct platform_device *pdev; - struct jz4740_mmc_platform_data *pdata; struct clk *clk; - struct gpio_desc *power; enum jz4740_mmc_version version; @@ -743,6 +739,7 @@ static irqreturn_t jz_mmc_irq_worker(int irq, void *devid) break; jz_mmc_prepare_data_transfer(host); + /* fall through */ case JZ4740_MMC_STATE_TRANSFER_DATA: if (host->use_dma) { @@ -777,6 +774,7 @@ static irqreturn_t jz_mmc_irq_worker(int irq, void *devid) break; } jz4740_mmc_write_irq_reg(host, JZ_MMC_IRQ_DATA_TRAN_DONE); + /* fall through */ case JZ4740_MMC_STATE_SEND_STOP: if (!req->stop) @@ -894,16 +892,16 @@ static void jz4740_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) switch (ios->power_mode) { case MMC_POWER_UP: jz4740_mmc_reset(host); - if (host->power) - gpiod_set_value(host->power, 1); + if (!IS_ERR(mmc->supply.vmmc)) + mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, ios->vdd); host->cmdat |= JZ_MMC_CMDAT_INIT; clk_prepare_enable(host->clk); break; case MMC_POWER_ON: break; default: - if (host->power) - gpiod_set_value(host->power, 0); + if (!IS_ERR(mmc->supply.vmmc)) + mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0); clk_disable_unprepare(host->clk); break; } @@ -936,38 +934,6 @@ static const struct mmc_host_ops jz4740_mmc_ops = { .enable_sdio_irq = jz4740_mmc_enable_sdio_irq, }; -static int jz4740_mmc_request_gpios(struct jz4740_mmc_host *host, - struct mmc_host *mmc, - struct platform_device *pdev) -{ - struct jz4740_mmc_platform_data *pdata = dev_get_platdata(&pdev->dev); - int ret = 0; - - if (!pdata) - return 0; - - if (!pdata->card_detect_active_low) - mmc->caps2 |= MMC_CAP2_CD_ACTIVE_HIGH; - if (!pdata->read_only_active_low) - mmc->caps2 |= MMC_CAP2_RO_ACTIVE_HIGH; - - /* - * Get optional card detect and write protect GPIOs, - * only back out on probe deferral. - */ - ret = mmc_gpiod_request_cd(mmc, "cd", 0, false, 0, NULL); - if (ret == -EPROBE_DEFER) - return ret; - - ret = mmc_gpiod_request_ro(mmc, "wp", 0, false, 0, NULL); - if (ret == -EPROBE_DEFER) - return ret; - - host->power = devm_gpiod_get_optional(&pdev->dev, "power", - GPIOD_OUT_HIGH); - return PTR_ERR_OR_ZERO(host->power); -} - static const struct of_device_id jz4740_mmc_of_match[] = { { .compatible = "ingenic,jz4740-mmc", .data = (void *) JZ_MMC_JZ4740 }, { .compatible = "ingenic,jz4725b-mmc", .data = (void *)JZ_MMC_JZ4725B }, @@ -982,9 +948,6 @@ static int jz4740_mmc_probe(struct platform_device* pdev) struct mmc_host *mmc; struct jz4740_mmc_host *host; const struct of_device_id *match; - struct jz4740_mmc_platform_data *pdata; - - pdata = dev_get_platdata(&pdev->dev); mmc = mmc_alloc_host(sizeof(struct jz4740_mmc_host), &pdev->dev); if (!mmc) { @@ -993,29 +956,25 @@ static int jz4740_mmc_probe(struct platform_device* pdev) } host = mmc_priv(mmc); - host->pdata = pdata; match = of_match_device(jz4740_mmc_of_match, &pdev->dev); if (match) { host->version = (enum jz4740_mmc_version)match->data; - ret = mmc_of_parse(mmc); - if (ret) { - if (ret != -EPROBE_DEFER) - dev_err(&pdev->dev, - "could not parse of data: %d\n", ret); - goto err_free_host; - } } else { /* JZ4740 should be the only one using legacy probe */ host->version = JZ_MMC_JZ4740; - mmc->caps |= MMC_CAP_SDIO_IRQ; - if (!(pdata && pdata->data_1bit)) - mmc->caps |= MMC_CAP_4_BIT_DATA; - ret = jz4740_mmc_request_gpios(host, mmc, pdev); - if (ret) - goto err_free_host; } + ret = mmc_of_parse(mmc); + if (ret) { + if (ret != -EPROBE_DEFER) + dev_err(&pdev->dev, + "could not parse device properties: %d\n", ret); + goto err_free_host; + } + + mmc_regulator_get_supply(mmc); + host->irq = platform_get_irq(pdev, 0); if (host->irq < 0) { ret = host->irq; diff --git a/drivers/mmc/host/mmc_spi.c b/drivers/mmc/host/mmc_spi.c index 8ade14fb2148..1b1498805972 100644 --- a/drivers/mmc/host/mmc_spi.c +++ b/drivers/mmc/host/mmc_spi.c @@ -1453,7 +1453,7 @@ static int mmc_spi_probe(struct spi_device *spi) mmc_detect_change(mmc, 0); /* Index 1 is write protect/read only */ - status = mmc_gpiod_request_ro(mmc, NULL, 1, false, 0, NULL); + status = mmc_gpiod_request_ro(mmc, NULL, 1, 0, NULL); if (status == -EPROBE_DEFER) goto fail_add_host; if (!status) diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index e352f5ad5801..387ff14587b8 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -1127,6 +1127,12 @@ mmci_start_command(struct mmci_host *host, struct mmc_command *cmd, u32 c) writel(c, base + MMCICOMMAND); } +static void mmci_stop_command(struct mmci_host *host) +{ + host->stop_abort.error = 0; + mmci_start_command(host, &host->stop_abort, 0); +} + static void mmci_data_irq(struct mmci_host *host, struct mmc_data *data, unsigned int status) @@ -1196,10 +1202,16 @@ mmci_data_irq(struct mmci_host *host, struct mmc_data *data, /* The error clause is handled above, success! */ data->bytes_xfered = data->blksz * data->blocks; - if (!data->stop || (host->mrq->sbc && !data->error)) + if (!data->stop) { + if (host->variant->cmdreg_stop && data->error) + mmci_stop_command(host); + else + mmci_request_end(host, data->mrq); + } else if (host->mrq->sbc && !data->error) { mmci_request_end(host, data->mrq); - else + } else { mmci_start_command(host, data->stop, 0); + } } } @@ -1298,6 +1310,10 @@ mmci_cmd_irq(struct mmci_host *host, struct mmc_command *cmd, mmci_dma_error(host); mmci_stop_data(host); + if (host->variant->cmdreg_stop && cmd->error) { + mmci_stop_command(host); + return; + } } mmci_request_end(host, host->mrq); } else if (sbc) { @@ -1956,6 +1972,11 @@ static int mmci_probe(struct amba_device *dev, mmc->max_busy_timeout = 0; } + /* Prepare a CMD12 - needed to clear the DPSM on some variants. */ + host->stop_abort.opcode = MMC_STOP_TRANSMISSION; + host->stop_abort.arg = 0; + host->stop_abort.flags = MMC_RSP_R1B | MMC_CMD_AC; + mmc->ops = &mmci_ops; /* We support these PM capabilities. */ @@ -2011,7 +2032,7 @@ static int mmci_probe(struct amba_device *dev, if (ret == -EPROBE_DEFER) goto clk_disable; - ret = mmc_gpiod_request_ro(mmc, "wp", 0, false, 0, NULL); + ret = mmc_gpiod_request_ro(mmc, "wp", 0, 0, NULL); if (ret == -EPROBE_DEFER) goto clk_disable; } diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h index 24229097d05c..14df81054438 100644 --- a/drivers/mmc/host/mmci.h +++ b/drivers/mmc/host/mmci.h @@ -377,6 +377,7 @@ struct mmci_host { void __iomem *base; struct mmc_request *mrq; struct mmc_command *cmd; + struct mmc_command stop_abort; struct mmc_data *data; struct mmc_host *mmc; struct clk *clk; diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c index 4d17032d15ee..d54612257b06 100644 --- a/drivers/mmc/host/mxcmmc.c +++ b/drivers/mmc/host/mxcmmc.c @@ -31,14 +31,12 @@ #include <linux/delay.h> #include <linux/clk.h> #include <linux/io.h> -#include <linux/gpio.h> #include <linux/regulator/consumer.h> #include <linux/dmaengine.h> #include <linux/types.h> #include <linux/of.h> #include <linux/of_device.h> #include <linux/of_dma.h> -#include <linux/of_gpio.h> #include <linux/mmc/slot-gpio.h> #include <asm/dma.h> diff --git a/drivers/mmc/host/mxs-mmc.c b/drivers/mmc/host/mxs-mmc.c index add1e70195ea..4f06fb03c0a2 100644 --- a/drivers/mmc/host/mxs-mmc.c +++ b/drivers/mmc/host/mxs-mmc.c @@ -25,7 +25,6 @@ #include <linux/ioport.h> #include <linux/of.h> #include <linux/of_device.h> -#include <linux/of_gpio.h> #include <linux/platform_device.h> #include <linux/delay.h> #include <linux/interrupt.h> @@ -39,7 +38,6 @@ #include <linux/mmc/mmc.h> #include <linux/mmc/sdio.h> #include <linux/mmc/slot-gpio.h> -#include <linux/gpio.h> #include <linux/regulator/consumer.h> #include <linux/module.h> #include <linux/stmp_device.h> diff --git a/drivers/mmc/host/of_mmc_spi.c b/drivers/mmc/host/of_mmc_spi.c index b294b221f225..8a274b91804e 100644 --- a/drivers/mmc/host/of_mmc_spi.c +++ b/drivers/mmc/host/of_mmc_spi.c @@ -61,9 +61,6 @@ struct mmc_spi_platform_data *mmc_spi_get_pdata(struct spi_device *spi) struct device *dev = &spi->dev; struct device_node *np = dev->of_node; struct of_mmc_spi *oms; - const __be32 *voltage_ranges; - int num_ranges; - int i; if (dev->platform_data || !np) return dev->platform_data; @@ -72,25 +69,8 @@ struct mmc_spi_platform_data *mmc_spi_get_pdata(struct spi_device *spi) if (!oms) return NULL; - voltage_ranges = of_get_property(np, "voltage-ranges", &num_ranges); - num_ranges = num_ranges / sizeof(*voltage_ranges) / 2; - if (!voltage_ranges || !num_ranges) { - dev_err(dev, "OF: voltage-ranges unspecified\n"); + if (mmc_of_parse_voltage(np, &oms->pdata.ocr_mask) <= 0) goto err_ocr; - } - - for (i = 0; i < num_ranges; i++) { - const int j = i * 2; - u32 mask; - - mask = mmc_vddrange_to_ocrmask(be32_to_cpu(voltage_ranges[j]), - be32_to_cpu(voltage_ranges[j + 1])); - if (!mask) { - dev_err(dev, "OF: voltage-range #%d is invalid\n", i); - goto err_ocr; - } - oms->pdata.ocr_mask |= mask; - } oms->detect_irq = irq_of_parse_and_map(np, 0); if (oms->detect_irq != 0) { diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c index c60a7625b1fa..b2873a2432b6 100644 --- a/drivers/mmc/host/omap.c +++ b/drivers/mmc/host/omap.c @@ -920,7 +920,7 @@ static inline void set_cmd_timeout(struct mmc_omap_host *host, struct mmc_reques reg &= ~(1 << 5); OMAP_MMC_WRITE(host, SDIO, reg); /* Set maximum timeout */ - OMAP_MMC_WRITE(host, CTO, 0xff); + OMAP_MMC_WRITE(host, CTO, 0xfd); } static inline void set_data_timeout(struct mmc_omap_host *host, struct mmc_request *req) diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c index 8779bbaa6b69..c907bf502a12 100644 --- a/drivers/mmc/host/pxamci.c +++ b/drivers/mmc/host/pxamci.c @@ -743,7 +743,7 @@ static int pxamci_probe(struct platform_device *pdev) goto out; } - ret = mmc_gpiod_request_ro(mmc, "wp", 0, false, 0, NULL); + ret = mmc_gpiod_request_ro(mmc, "wp", 0, 0, NULL); if (ret && ret != -ENOENT) { dev_err(dev, "Failed requesting gpio_ro\n"); goto out; diff --git a/drivers/mmc/host/renesas_sdhi.h b/drivers/mmc/host/renesas_sdhi.h index da1e49c45bec..8394a7bb1fc1 100644 --- a/drivers/mmc/host/renesas_sdhi.h +++ b/drivers/mmc/host/renesas_sdhi.h @@ -15,6 +15,7 @@ struct renesas_sdhi_scc { unsigned long clk_rate; /* clock rate for SDR104 */ u32 tap; /* sampling clock position for SDR104 */ + u32 tap_hs400; /* sampling clock position for HS400 */ }; struct renesas_sdhi_of_data { @@ -49,6 +50,7 @@ struct renesas_sdhi { struct pinctrl_state *pins_default, *pins_uhs; void __iomem *scc_ctl; u32 scc_tappos; + u32 scc_tappos_hs400; }; #define host_to_priv(host) \ diff --git a/drivers/mmc/host/renesas_sdhi_core.c b/drivers/mmc/host/renesas_sdhi_core.c index 31a351a20dc0..71e13844df6c 100644 --- a/drivers/mmc/host/renesas_sdhi_core.c +++ b/drivers/mmc/host/renesas_sdhi_core.c @@ -337,6 +337,10 @@ static void renesas_sdhi_hs400_complete(struct tmio_mmc_host *host) /* Set HS400 mode */ sd_ctrl_write16(host, CTL_SDIF_MODE, 0x0001 | sd_ctrl_read16(host, CTL_SDIF_MODE)); + + sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_DT2FF, + priv->scc_tappos_hs400); + sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_TMPPORT2, (SH_MOBILE_SDHI_SCC_TMPPORT2_HS400EN | SH_MOBILE_SDHI_SCC_TMPPORT2_HS400OSEL) | @@ -396,6 +400,9 @@ static void renesas_sdhi_reset_hs400_mode(struct tmio_mmc_host *host, /* Reset HS400 mode */ sd_ctrl_write16(host, CTL_SDIF_MODE, ~0x0001 & sd_ctrl_read16(host, CTL_SDIF_MODE)); + + sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_DT2FF, priv->scc_tappos); + sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_TMPPORT2, ~(SH_MOBILE_SDHI_SCC_TMPPORT2_HS400EN | SH_MOBILE_SDHI_SCC_TMPPORT2_HS400OSEL) & @@ -723,6 +730,13 @@ int renesas_sdhi_probe(struct platform_device *pdev, host->ops.start_signal_voltage_switch = renesas_sdhi_start_signal_voltage_switch; host->sdcard_irq_setbit_mask = TMIO_STAT_ALWAYS_SET_27; + + /* SDR and HS200/400 registers requires HW reset */ + if (of_data && of_data->scc_offset) { + priv->scc_ctl = host->ctl + of_data->scc_offset; + host->mmc->caps |= MMC_CAP_HW_RESET; + host->hw_reset = renesas_sdhi_hw_reset; + } } /* Orginally registers were 16 bit apart, could be 32 or 64 nowadays */ @@ -775,12 +789,11 @@ int renesas_sdhi_probe(struct platform_device *pdev, const struct renesas_sdhi_scc *taps = of_data->taps; bool hit = false; - host->mmc->caps |= MMC_CAP_HW_RESET; - for (i = 0; i < of_data->taps_num; i++) { if (taps[i].clk_rate == 0 || taps[i].clk_rate == host->mmc->f_max) { priv->scc_tappos = taps->tap; + priv->scc_tappos_hs400 = taps->tap_hs400; hit = true; break; } @@ -789,12 +802,10 @@ int renesas_sdhi_probe(struct platform_device *pdev, if (!hit) dev_warn(&host->pdev->dev, "Unknown clock rate for SDR104\n"); - priv->scc_ctl = host->ctl + of_data->scc_offset; host->init_tuning = renesas_sdhi_init_tuning; host->prepare_tuning = renesas_sdhi_prepare_tuning; host->select_tuning = renesas_sdhi_select_tuning; host->check_scc_error = renesas_sdhi_check_scc_error; - host->hw_reset = renesas_sdhi_hw_reset; host->prepare_hs400_tuning = renesas_sdhi_prepare_hs400_tuning; host->hs400_downgrade = renesas_sdhi_disable_scc; diff --git a/drivers/mmc/host/renesas_sdhi_internal_dmac.c b/drivers/mmc/host/renesas_sdhi_internal_dmac.c index 92c9b15252da..9dfafa2a90a3 100644 --- a/drivers/mmc/host/renesas_sdhi_internal_dmac.c +++ b/drivers/mmc/host/renesas_sdhi_internal_dmac.c @@ -81,6 +81,7 @@ static struct renesas_sdhi_scc rcar_gen3_scc_taps[] = { { .clk_rate = 0, .tap = 0x00000300, + .tap_hs400 = 0x00000704, }, }; diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c index 10f5219b3b40..f31333e831a7 100644 --- a/drivers/mmc/host/s3cmci.c +++ b/drivers/mmc/host/s3cmci.c @@ -1530,7 +1530,7 @@ static int s3cmci_probe_pdata(struct s3cmci_host *host) return ret; } - ret = mmc_gpiod_request_ro(host->mmc, "wp", 0, false, 0, NULL); + ret = mmc_gpiod_request_ro(host->mmc, "wp", 0, 0, NULL); if (ret != -ENOENT) { dev_err(&pdev->dev, "error requesting GPIO for WP %d\n", ret); diff --git a/drivers/mmc/host/sdhci-bcm-kona.c b/drivers/mmc/host/sdhci-bcm-kona.c index bdbd4897c0f7..a6c2bd202b45 100644 --- a/drivers/mmc/host/sdhci-bcm-kona.c +++ b/drivers/mmc/host/sdhci-bcm-kona.c @@ -18,12 +18,10 @@ #include <linux/platform_device.h> #include <linux/mmc/host.h> #include <linux/io.h> -#include <linux/gpio.h> #include <linux/clk.h> #include <linux/regulator/consumer.h> #include <linux/of.h> #include <linux/of_device.h> -#include <linux/of_gpio.h> #include <linux/mmc/slot-gpio.h> #include "sdhci-pltfm.h" diff --git a/drivers/mmc/host/sdhci-brcmstb.c b/drivers/mmc/host/sdhci-brcmstb.c index 552bddc5096c..1cd10356fc14 100644 --- a/drivers/mmc/host/sdhci-brcmstb.c +++ b/drivers/mmc/host/sdhci-brcmstb.c @@ -55,7 +55,9 @@ static int sdhci_brcmstb_probe(struct platform_device *pdev) } sdhci_get_of_property(pdev); - mmc_of_parse(host->mmc); + res = mmc_of_parse(host->mmc); + if (res) + goto err; /* * Supply the existing CAPS, but clear the UHS modes. This diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c index 00d41b312c79..8dbbc1f62b70 100644 --- a/drivers/mmc/host/sdhci-esdhc-imx.c +++ b/drivers/mmc/host/sdhci-esdhc-imx.c @@ -25,6 +25,7 @@ #include <linux/pm_runtime.h> #include "sdhci-pltfm.h" #include "sdhci-esdhc.h" +#include "cqhci.h" #define ESDHC_SYS_CTRL_DTOCV_MASK 0x0f #define ESDHC_CTRL_D3CD 0x08 @@ -50,6 +51,7 @@ #define ESDHC_MIX_CTRL_AUTO_TUNE_EN (1 << 24) #define ESDHC_MIX_CTRL_FBCLK_SEL (1 << 25) #define ESDHC_MIX_CTRL_HS400_EN (1 << 26) +#define ESDHC_MIX_CTRL_HS400_ES_EN (1 << 27) /* Bits 3 and 6 are not SDHCI standard definitions */ #define ESDHC_MIX_CTRL_SDHCI_MASK 0xb7 /* Tuning bits */ @@ -76,6 +78,9 @@ #define ESDHC_STROBE_DLL_STS_REF_LOCK (1 << 1) #define ESDHC_STROBE_DLL_STS_SLV_LOCK 0x1 +#define ESDHC_VEND_SPEC2 0xc8 +#define ESDHC_VEND_SPEC2_EN_BUSY_IRQ (1 << 8) + #define ESDHC_TUNING_CTRL 0xcc #define ESDHC_STD_TUNING_EN (1 << 24) /* NOTE: the minimum valid tuning start tap for mx6sl is 1 */ @@ -103,6 +108,9 @@ */ #define ESDHC_INT_VENDOR_SPEC_DMA_ERR (1 << 28) +/* the address offset of CQHCI */ +#define ESDHC_CQHCI_ADDR_OFFSET 0x100 + /* * The CMDTYPE of the CMD register (offset 0xE) should be set to * "11" when the STOP CMD12 is issued on imx53 to abort one @@ -138,51 +146,71 @@ #define ESDHC_FLAG_HS200 BIT(8) /* The IP supports HS400 mode */ #define ESDHC_FLAG_HS400 BIT(9) - -/* A clock frequency higher than this rate requires strobe dll control */ -#define ESDHC_STROBE_DLL_CLK_FREQ 100000000 +/* + * The IP has errata ERR010450 + * uSDHC: Due to the I/O timing limit, for SDR mode, SD card clock can't + * exceed 150MHz, for DDR mode, SD card clock can't exceed 45MHz. + */ +#define ESDHC_FLAG_ERR010450 BIT(10) +/* The IP supports HS400ES mode */ +#define ESDHC_FLAG_HS400_ES BIT(11) +/* The IP has Host Controller Interface for Command Queuing */ +#define ESDHC_FLAG_CQHCI BIT(12) struct esdhc_soc_data { u32 flags; }; -static struct esdhc_soc_data esdhc_imx25_data = { +static const struct esdhc_soc_data esdhc_imx25_data = { .flags = ESDHC_FLAG_ERR004536, }; -static struct esdhc_soc_data esdhc_imx35_data = { +static const struct esdhc_soc_data esdhc_imx35_data = { .flags = ESDHC_FLAG_ERR004536, }; -static struct esdhc_soc_data esdhc_imx51_data = { +static const struct esdhc_soc_data esdhc_imx51_data = { .flags = 0, }; -static struct esdhc_soc_data esdhc_imx53_data = { +static const struct esdhc_soc_data esdhc_imx53_data = { .flags = ESDHC_FLAG_MULTIBLK_NO_INT, }; -static struct esdhc_soc_data usdhc_imx6q_data = { +static const struct esdhc_soc_data usdhc_imx6q_data = { .flags = ESDHC_FLAG_USDHC | ESDHC_FLAG_MAN_TUNING, }; -static struct esdhc_soc_data usdhc_imx6sl_data = { +static const struct esdhc_soc_data usdhc_imx6sl_data = { .flags = ESDHC_FLAG_USDHC | ESDHC_FLAG_STD_TUNING | ESDHC_FLAG_HAVE_CAP1 | ESDHC_FLAG_ERR004536 | ESDHC_FLAG_HS200, }; -static struct esdhc_soc_data usdhc_imx6sx_data = { +static const struct esdhc_soc_data usdhc_imx6sx_data = { .flags = ESDHC_FLAG_USDHC | ESDHC_FLAG_STD_TUNING | ESDHC_FLAG_HAVE_CAP1 | ESDHC_FLAG_HS200, }; -static struct esdhc_soc_data usdhc_imx7d_data = { +static const struct esdhc_soc_data usdhc_imx6ull_data = { + .flags = ESDHC_FLAG_USDHC | ESDHC_FLAG_STD_TUNING + | ESDHC_FLAG_HAVE_CAP1 | ESDHC_FLAG_HS200 + | ESDHC_FLAG_ERR010450, +}; + +static const struct esdhc_soc_data usdhc_imx7d_data = { .flags = ESDHC_FLAG_USDHC | ESDHC_FLAG_STD_TUNING | ESDHC_FLAG_HAVE_CAP1 | ESDHC_FLAG_HS200 | ESDHC_FLAG_HS400, }; +static struct esdhc_soc_data usdhc_imx8qxp_data = { + .flags = ESDHC_FLAG_USDHC | ESDHC_FLAG_STD_TUNING + | ESDHC_FLAG_HAVE_CAP1 | ESDHC_FLAG_HS200 + | ESDHC_FLAG_HS400 | ESDHC_FLAG_HS400_ES + | ESDHC_FLAG_CQHCI, +}; + struct pltfm_imx_data { u32 scratchpad; struct pinctrl *pinctrl; @@ -227,7 +255,9 @@ static const struct of_device_id imx_esdhc_dt_ids[] = { { .compatible = "fsl,imx6sx-usdhc", .data = &usdhc_imx6sx_data, }, { .compatible = "fsl,imx6sl-usdhc", .data = &usdhc_imx6sl_data, }, { .compatible = "fsl,imx6q-usdhc", .data = &usdhc_imx6q_data, }, + { .compatible = "fsl,imx6ull-usdhc", .data = &usdhc_imx6ull_data, }, { .compatible = "fsl,imx7d-usdhc", .data = &usdhc_imx7d_data, }, + { .compatible = "fsl,imx8qxp-usdhc", .data = &usdhc_imx8qxp_data, }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, imx_esdhc_dt_ids); @@ -733,6 +763,14 @@ static inline void esdhc_pltfm_set_clock(struct sdhci_host *host, | ESDHC_CLOCK_MASK); sdhci_writel(host, temp, ESDHC_SYSTEM_CONTROL); + if (imx_data->socdata->flags & ESDHC_FLAG_ERR010450) { + unsigned int max_clock; + + max_clock = imx_data->is_ddr ? 45000000 : 150000000; + + clock = min(clock, max_clock); + } + while (host_clock / (16 * pre_div * ddr_pre_div) > clock && pre_div < 256) pre_div *= 2; @@ -801,6 +839,20 @@ static void esdhc_pltfm_set_bus_width(struct sdhci_host *host, int width) SDHCI_HOST_CONTROL); } +static int usdhc_execute_tuning(struct mmc_host *mmc, u32 opcode) +{ + struct sdhci_host *host = mmc_priv(mmc); + + /* + * i.MX uSDHC internally already uses a fixed optimized timing for + * DDR50, normally does not require tuning for DDR50 mode. + */ + if (host->timing == MMC_TIMING_UHS_DDR50) + return 0; + + return sdhci_execute_tuning(mmc, opcode); +} + static void esdhc_prepare_tuning(struct sdhci_host *host, u32 val) { u32 reg; @@ -864,6 +916,19 @@ static int esdhc_executing_tuning(struct sdhci_host *host, u32 opcode) return ret; } +static void esdhc_hs400_enhanced_strobe(struct mmc_host *mmc, struct mmc_ios *ios) +{ + struct sdhci_host *host = mmc_priv(mmc); + u32 m; + + m = readl(host->ioaddr + ESDHC_MIX_CTRL); + if (ios->enhanced_strobe) + m |= ESDHC_MIX_CTRL_HS400_ES_EN; + else + m &= ~ESDHC_MIX_CTRL_HS400_ES_EN; + writel(m, host->ioaddr + ESDHC_MIX_CTRL); +} + static int esdhc_change_pinstate(struct sdhci_host *host, unsigned int uhs) { @@ -905,39 +970,35 @@ static int esdhc_change_pinstate(struct sdhci_host *host, * edge of data_strobe line. Due to the time delay between CLK line and * data_strobe line, if the delay time is larger than one clock cycle, * then CLK and data_strobe line will be misaligned, read error shows up. - * So when the CLK is higher than 100MHz, each clock cycle is short enough, - * host should configure the delay target. */ static void esdhc_set_strobe_dll(struct sdhci_host *host) { u32 v; - if (host->mmc->actual_clock > ESDHC_STROBE_DLL_CLK_FREQ) { - /* disable clock before enabling strobe dll */ - writel(readl(host->ioaddr + ESDHC_VENDOR_SPEC) & - ~ESDHC_VENDOR_SPEC_FRC_SDCLK_ON, - host->ioaddr + ESDHC_VENDOR_SPEC); + /* disable clock before enabling strobe dll */ + writel(readl(host->ioaddr + ESDHC_VENDOR_SPEC) & + ~ESDHC_VENDOR_SPEC_FRC_SDCLK_ON, + host->ioaddr + ESDHC_VENDOR_SPEC); - /* force a reset on strobe dll */ - writel(ESDHC_STROBE_DLL_CTRL_RESET, - host->ioaddr + ESDHC_STROBE_DLL_CTRL); - /* - * enable strobe dll ctrl and adjust the delay target - * for the uSDHC loopback read clock - */ - v = ESDHC_STROBE_DLL_CTRL_ENABLE | - (7 << ESDHC_STROBE_DLL_CTRL_SLV_DLY_TARGET_SHIFT); - writel(v, host->ioaddr + ESDHC_STROBE_DLL_CTRL); - /* wait 1us to make sure strobe dll status register stable */ - udelay(1); - v = readl(host->ioaddr + ESDHC_STROBE_DLL_STATUS); - if (!(v & ESDHC_STROBE_DLL_STS_REF_LOCK)) - dev_warn(mmc_dev(host->mmc), - "warning! HS400 strobe DLL status REF not lock!\n"); - if (!(v & ESDHC_STROBE_DLL_STS_SLV_LOCK)) - dev_warn(mmc_dev(host->mmc), - "warning! HS400 strobe DLL status SLV not lock!\n"); - } + /* force a reset on strobe dll */ + writel(ESDHC_STROBE_DLL_CTRL_RESET, + host->ioaddr + ESDHC_STROBE_DLL_CTRL); + /* + * enable strobe dll ctrl and adjust the delay target + * for the uSDHC loopback read clock + */ + v = ESDHC_STROBE_DLL_CTRL_ENABLE | + (7 << ESDHC_STROBE_DLL_CTRL_SLV_DLY_TARGET_SHIFT); + writel(v, host->ioaddr + ESDHC_STROBE_DLL_CTRL); + /* wait 1us to make sure strobe dll status register stable */ + udelay(1); + v = readl(host->ioaddr + ESDHC_STROBE_DLL_STATUS); + if (!(v & ESDHC_STROBE_DLL_STS_REF_LOCK)) + dev_warn(mmc_dev(host->mmc), + "warning! HS400 strobe DLL status REF not lock!\n"); + if (!(v & ESDHC_STROBE_DLL_STS_SLV_LOCK)) + dev_warn(mmc_dev(host->mmc), + "warning! HS400 strobe DLL status SLV not lock!\n"); } static void esdhc_reset_tuning(struct sdhci_host *host) @@ -979,6 +1040,7 @@ static void esdhc_set_uhs_signaling(struct sdhci_host *host, unsigned timing) case MMC_TIMING_UHS_SDR25: case MMC_TIMING_UHS_SDR50: case MMC_TIMING_UHS_SDR104: + case MMC_TIMING_MMC_HS: case MMC_TIMING_MMC_HS200: writel(m, host->ioaddr + ESDHC_MIX_CTRL); break; @@ -1042,6 +1104,19 @@ static void esdhc_set_timeout(struct sdhci_host *host, struct mmc_command *cmd) SDHCI_TIMEOUT_CONTROL); } +static u32 esdhc_cqhci_irq(struct sdhci_host *host, u32 intmask) +{ + int cmd_error = 0; + int data_error = 0; + + if (!sdhci_cqe_irq(host, intmask, &cmd_error, &data_error)) + return intmask; + + cqhci_irq(host->mmc, intmask, cmd_error, data_error); + + return 0; +} + static struct sdhci_ops sdhci_esdhc_ops = { .read_l = esdhc_readl_le, .read_w = esdhc_readw_le, @@ -1058,6 +1133,7 @@ static struct sdhci_ops sdhci_esdhc_ops = { .set_bus_width = esdhc_pltfm_set_bus_width, .set_uhs_signaling = esdhc_set_uhs_signaling, .reset = esdhc_reset, + .irq = esdhc_cqhci_irq, }; static const struct sdhci_pltfm_data sdhci_esdhc_imx_pdata = { @@ -1106,6 +1182,23 @@ static void sdhci_esdhc_imx_hwinit(struct sdhci_host *host) /* disable DLL_CTRL delay line settings */ writel(0x0, host->ioaddr + ESDHC_DLL_CTRL); + /* + * For the case of command with busy, if set the bit + * ESDHC_VEND_SPEC2_EN_BUSY_IRQ, USDHC will generate a + * transfer complete interrupt when busy is deasserted. + * When CQHCI use DCMD to send a CMD need R1b respons, + * CQHCI require to set ESDHC_VEND_SPEC2_EN_BUSY_IRQ, + * otherwise DCMD will always meet timeout waiting for + * hardware interrupt issue. + */ + if (imx_data->socdata->flags & ESDHC_FLAG_CQHCI) { + tmp = readl(host->ioaddr + ESDHC_VEND_SPEC2); + tmp |= ESDHC_VEND_SPEC2_EN_BUSY_IRQ; + writel(tmp, host->ioaddr + ESDHC_VEND_SPEC2); + + host->quirks &= ~SDHCI_QUIRK_NO_BUSY_IRQ; + } + if (imx_data->socdata->flags & ESDHC_FLAG_STD_TUNING) { tmp = readl(host->ioaddr + ESDHC_TUNING_CTRL); tmp |= ESDHC_STD_TUNING_EN | @@ -1121,10 +1214,81 @@ static void sdhci_esdhc_imx_hwinit(struct sdhci_host *host) << ESDHC_TUNING_STEP_SHIFT; } writel(tmp, host->ioaddr + ESDHC_TUNING_CTRL); + } else if (imx_data->socdata->flags & ESDHC_FLAG_MAN_TUNING) { + /* + * ESDHC_STD_TUNING_EN may be configed in bootloader + * or ROM code, so clear this bit here to make sure + * the manual tuning can work. + */ + tmp = readl(host->ioaddr + ESDHC_TUNING_CTRL); + tmp &= ~ESDHC_STD_TUNING_EN; + writel(tmp, host->ioaddr + ESDHC_TUNING_CTRL); } } } +static void esdhc_cqe_enable(struct mmc_host *mmc) +{ + struct sdhci_host *host = mmc_priv(mmc); + struct cqhci_host *cq_host = mmc->cqe_private; + u32 reg; + u16 mode; + int count = 10; + + /* + * CQE gets stuck if it sees Buffer Read Enable bit set, which can be + * the case after tuning, so ensure the buffer is drained. + */ + reg = sdhci_readl(host, SDHCI_PRESENT_STATE); + while (reg & SDHCI_DATA_AVAILABLE) { + sdhci_readl(host, SDHCI_BUFFER); + reg = sdhci_readl(host, SDHCI_PRESENT_STATE); + if (count-- == 0) { + dev_warn(mmc_dev(host->mmc), + "CQE may get stuck because the Buffer Read Enable bit is set\n"); + break; + } + mdelay(1); + } + + /* + * Runtime resume will reset the entire host controller, which + * will also clear the DMAEN/BCEN of register ESDHC_MIX_CTRL. + * Here set DMAEN and BCEN when enable CMDQ. + */ + mode = sdhci_readw(host, SDHCI_TRANSFER_MODE); + if (host->flags & SDHCI_REQ_USE_DMA) + mode |= SDHCI_TRNS_DMA; + if (!(host->quirks2 & SDHCI_QUIRK2_SUPPORT_SINGLE)) + mode |= SDHCI_TRNS_BLK_CNT_EN; + sdhci_writew(host, mode, SDHCI_TRANSFER_MODE); + + /* + * Though Runtime resume reset the entire host controller, + * but do not impact the CQHCI side, need to clear the + * HALT bit, avoid CQHCI stuck in the first request when + * system resume back. + */ + cqhci_writel(cq_host, 0, CQHCI_CTL); + if (cqhci_readl(cq_host, CQHCI_CTL) && CQHCI_HALT) + dev_err(mmc_dev(host->mmc), + "failed to exit halt state when enable CQE\n"); + + + sdhci_cqe_enable(mmc); +} + +static void esdhc_sdhci_dumpregs(struct mmc_host *mmc) +{ + sdhci_dumpregs(mmc_priv(mmc)); +} + +static const struct cqhci_host_ops esdhc_cqhci_ops = { + .enable = esdhc_cqe_enable, + .disable = sdhci_cqe_disable, + .dumpregs = esdhc_sdhci_dumpregs, +}; + #ifdef CONFIG_OF static int sdhci_esdhc_imx_probe_dt(struct platform_device *pdev, @@ -1201,7 +1365,7 @@ static int sdhci_esdhc_imx_probe_nondt(struct platform_device *pdev, host->mmc->parent->platform_data); /* write_protect */ if (boarddata->wp_type == ESDHC_WP_GPIO) { - err = mmc_gpiod_request_ro(host->mmc, "wp", 0, false, 0, NULL); + err = mmc_gpiod_request_ro(host->mmc, "wp", 0, 0, NULL); if (err) { dev_err(mmc_dev(host->mmc), "failed to request write-protect gpio!\n"); @@ -1256,6 +1420,7 @@ static int sdhci_esdhc_imx_probe(struct platform_device *pdev) of_match_device(imx_esdhc_dt_ids, &pdev->dev); struct sdhci_pltfm_host *pltfm_host; struct sdhci_host *host; + struct cqhci_host *cq_host; int err; struct pltfm_imx_data *imx_data; @@ -1322,6 +1487,12 @@ static int sdhci_esdhc_imx_probe(struct platform_device *pdev) writel(0x0, host->ioaddr + ESDHC_MIX_CTRL); writel(0x0, host->ioaddr + SDHCI_AUTO_CMD_STATUS); writel(0x0, host->ioaddr + ESDHC_TUNE_CTRL_STATUS); + + /* + * Link usdhc specific mmc_host_ops execute_tuning function, + * to replace the standard one in sdhci_ops. + */ + host->mmc_host_ops.execute_tuning = usdhc_execute_tuning; } if (imx_data->socdata->flags & ESDHC_FLAG_MAN_TUNING) @@ -1334,6 +1505,28 @@ static int sdhci_esdhc_imx_probe(struct platform_device *pdev) if (imx_data->socdata->flags & ESDHC_FLAG_HS400) host->quirks2 |= SDHCI_QUIRK2_CAPS_BIT63_FOR_HS400; + if (imx_data->socdata->flags & ESDHC_FLAG_HS400_ES) { + host->mmc->caps2 |= MMC_CAP2_HS400_ES; + host->mmc_host_ops.hs400_enhanced_strobe = + esdhc_hs400_enhanced_strobe; + } + + if (imx_data->socdata->flags & ESDHC_FLAG_CQHCI) { + host->mmc->caps2 |= MMC_CAP2_CQE | MMC_CAP2_CQE_DCMD; + cq_host = devm_kzalloc(&pdev->dev, sizeof(*cq_host), GFP_KERNEL); + if (!cq_host) { + err = -ENOMEM; + goto disable_ahb_clk; + } + + cq_host->mmio = host->ioaddr + ESDHC_CQHCI_ADDR_OFFSET; + cq_host->ops = &esdhc_cqhci_ops; + + err = cqhci_init(cq_host, host->mmc, false); + if (err) + goto disable_ahb_clk; + } + if (of_id) err = sdhci_esdhc_imx_probe_dt(pdev, host, imx_data); else @@ -1341,6 +1534,8 @@ static int sdhci_esdhc_imx_probe(struct platform_device *pdev) if (err) goto disable_ahb_clk; + host->tuning_delay = 1; + sdhci_esdhc_imx_hwinit(host); err = sdhci_add_host(host); @@ -1392,6 +1587,13 @@ static int sdhci_esdhc_imx_remove(struct platform_device *pdev) static int sdhci_esdhc_suspend(struct device *dev) { struct sdhci_host *host = dev_get_drvdata(dev); + int ret; + + if (host->mmc->caps2 & MMC_CAP2_CQE) { + ret = cqhci_suspend(host->mmc); + if (ret) + return ret; + } if (host->tuning_mode != SDHCI_TUNING_MODE_3) mmc_retune_needed(host->mmc); @@ -1402,11 +1604,19 @@ static int sdhci_esdhc_suspend(struct device *dev) static int sdhci_esdhc_resume(struct device *dev) { struct sdhci_host *host = dev_get_drvdata(dev); + int ret; /* re-initialize hw state in case it's lost in low power mode */ sdhci_esdhc_imx_hwinit(host); - return sdhci_resume_host(host); + ret = sdhci_resume_host(host); + if (ret) + return ret; + + if (host->mmc->caps2 & MMC_CAP2_CQE) + ret = cqhci_resume(host->mmc); + + return ret; } #endif @@ -1418,6 +1628,12 @@ static int sdhci_esdhc_runtime_suspend(struct device *dev) struct pltfm_imx_data *imx_data = sdhci_pltfm_priv(pltfm_host); int ret; + if (host->mmc->caps2 & MMC_CAP2_CQE) { + ret = cqhci_suspend(host->mmc); + if (ret) + return ret; + } + ret = sdhci_runtime_suspend_host(host); if (ret) return ret; @@ -1461,7 +1677,10 @@ static int sdhci_esdhc_runtime_resume(struct device *dev) if (err) goto disable_ipg_clk; - return 0; + if (host->mmc->caps2 & MMC_CAP2_CQE) + err = cqhci_resume(host->mmc); + + return err; disable_ipg_clk: if (!sdhci_sdio_irq_enabled(host)) diff --git a/drivers/mmc/host/sdhci-omap.c b/drivers/mmc/host/sdhci-omap.c index c11c18a9aacb..b1a66ca3821a 100644 --- a/drivers/mmc/host/sdhci-omap.c +++ b/drivers/mmc/host/sdhci-omap.c @@ -1097,7 +1097,6 @@ static int sdhci_omap_probe(struct platform_device *pdev) goto err_put_sync; } - host->mmc_host_ops.get_ro = mmc_gpio_get_ro; host->mmc_host_ops.start_signal_voltage_switch = sdhci_omap_start_signal_voltage_switch; host->mmc_host_ops.set_ios = sdhci_omap_set_ios; diff --git a/drivers/mmc/host/sdhci-pci-core.c b/drivers/mmc/host/sdhci-pci-core.c index 2a6eba74b94e..99b0fec2836b 100644 --- a/drivers/mmc/host/sdhci-pci-core.c +++ b/drivers/mmc/host/sdhci-pci-core.c @@ -1257,16 +1257,6 @@ static int jmicron_resume(struct sdhci_pci_chip *chip) } #endif -static const struct sdhci_pci_fixes sdhci_o2 = { - .probe = sdhci_pci_o2_probe, - .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC, - .quirks2 = SDHCI_QUIRK2_CLEAR_TRANSFERMODE_REG_BEFORE_CMD, - .probe_slot = sdhci_pci_o2_probe_slot, -#ifdef CONFIG_PM_SLEEP - .resume = sdhci_pci_o2_resume, -#endif -}; - static const struct sdhci_pci_fixes sdhci_jmicron = { .probe = jmicron_probe, diff --git a/drivers/mmc/host/sdhci-pci-o2micro.c b/drivers/mmc/host/sdhci-pci-o2micro.c index cc3ffeffd7a2..05a012a694b2 100644 --- a/drivers/mmc/host/sdhci-pci-o2micro.c +++ b/drivers/mmc/host/sdhci-pci-o2micro.c @@ -60,6 +60,13 @@ #define O2_SD_VENDOR_SETTING2 0x1C8 #define O2_SD_HW_TUNING_DISABLE BIT(4) +#define O2_PLL_WDT_CONTROL1 0x1CC +#define O2_PLL_FORCE_ACTIVE BIT(18) +#define O2_PLL_LOCK_STATUS BIT(14) +#define O2_PLL_SOFT_RESET BIT(12) + +#define O2_SD_DETECT_SETTING 0x324 + static void sdhci_o2_set_tuning_mode(struct sdhci_host *host) { u16 reg; @@ -283,6 +290,113 @@ static void sdhci_pci_o2_enable_msi(struct sdhci_pci_chip *chip, host->irq = pci_irq_vector(chip->pdev, 0); } +static void sdhci_o2_wait_card_detect_stable(struct sdhci_host *host) +{ + ktime_t timeout; + u32 scratch32; + + /* Wait max 50 ms */ + timeout = ktime_add_ms(ktime_get(), 50); + while (1) { + bool timedout = ktime_after(ktime_get(), timeout); + + scratch32 = sdhci_readl(host, SDHCI_PRESENT_STATE); + if ((scratch32 & SDHCI_CARD_PRESENT) >> SDHCI_CARD_PRES_SHIFT + == (scratch32 & SDHCI_CD_LVL) >> SDHCI_CD_LVL_SHIFT) + break; + + if (timedout) { + pr_err("%s: Card Detect debounce never finished.\n", + mmc_hostname(host->mmc)); + sdhci_dumpregs(host); + return; + } + udelay(10); + } +} + +static void sdhci_o2_enable_internal_clock(struct sdhci_host *host) +{ + ktime_t timeout; + u16 scratch; + u32 scratch32; + + /* PLL software reset */ + scratch32 = sdhci_readl(host, O2_PLL_WDT_CONTROL1); + scratch32 |= O2_PLL_SOFT_RESET; + sdhci_writel(host, scratch32, O2_PLL_WDT_CONTROL1); + udelay(1); + scratch32 &= ~(O2_PLL_SOFT_RESET); + sdhci_writel(host, scratch32, O2_PLL_WDT_CONTROL1); + + /* PLL force active */ + scratch32 |= O2_PLL_FORCE_ACTIVE; + sdhci_writel(host, scratch32, O2_PLL_WDT_CONTROL1); + + /* Wait max 20 ms */ + timeout = ktime_add_ms(ktime_get(), 20); + while (1) { + bool timedout = ktime_after(ktime_get(), timeout); + + scratch = sdhci_readw(host, O2_PLL_WDT_CONTROL1); + if (scratch & O2_PLL_LOCK_STATUS) + break; + if (timedout) { + pr_err("%s: Internal clock never stabilised.\n", + mmc_hostname(host->mmc)); + sdhci_dumpregs(host); + goto out; + } + udelay(10); + } + + /* Wait for card detect finish */ + udelay(1); + sdhci_o2_wait_card_detect_stable(host); + +out: + /* Cancel PLL force active */ + scratch32 = sdhci_readl(host, O2_PLL_WDT_CONTROL1); + scratch32 &= ~O2_PLL_FORCE_ACTIVE; + sdhci_writel(host, scratch32, O2_PLL_WDT_CONTROL1); +} + +static int sdhci_o2_get_cd(struct mmc_host *mmc) +{ + struct sdhci_host *host = mmc_priv(mmc); + + sdhci_o2_enable_internal_clock(host); + + return !!(sdhci_readl(host, SDHCI_PRESENT_STATE) & SDHCI_CARD_PRESENT); +} + +static void sdhci_o2_enable_clk(struct sdhci_host *host, u16 clk) +{ + /* Enable internal clock */ + clk |= SDHCI_CLOCK_INT_EN; + sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL); + + if (sdhci_o2_get_cd(host->mmc)) { + clk |= SDHCI_CLOCK_CARD_EN; + sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL); + } +} + +void sdhci_pci_o2_set_clock(struct sdhci_host *host, unsigned int clock) +{ + u16 clk; + + host->mmc->actual_clock = 0; + + sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL); + + if (clock == 0) + return; + + clk = sdhci_calc_clk(host, clock, &host->mmc->actual_clock); + sdhci_o2_enable_clk(host, clk); +} + int sdhci_pci_o2_probe_slot(struct sdhci_pci_slot *slot) { struct sdhci_pci_chip *chip; @@ -314,9 +428,14 @@ int sdhci_pci_o2_probe_slot(struct sdhci_pci_slot *slot) mmc_hostname(host->mmc)); host->flags &= ~SDHCI_SIGNALING_330; host->flags |= SDHCI_SIGNALING_180; + host->quirks2 |= SDHCI_QUIRK2_CLEAR_TRANSFERMODE_REG_BEFORE_CMD; host->mmc->caps2 |= MMC_CAP2_NO_SD; host->mmc->caps2 |= MMC_CAP2_NO_SDIO; + pci_write_config_dword(chip->pdev, + O2_SD_DETECT_SETTING, 3); } + + slot->host->mmc_host_ops.get_cd = sdhci_o2_get_cd; } host->mmc_host_ops.execute_tuning = sdhci_o2_execute_tuning; @@ -490,9 +609,6 @@ int sdhci_pci_o2_probe(struct sdhci_pci_chip *chip) pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch); break; case PCI_DEVICE_ID_O2_SEABIRD0: - if (chip->pdev->revision == 0x01) - chip->quirks |= SDHCI_QUIRK_DELAY_AFTER_POWER; - /* fall through */ case PCI_DEVICE_ID_O2_SEABIRD1: /* UnLock WP */ ret = pci_read_config_byte(chip->pdev, @@ -550,3 +666,21 @@ int sdhci_pci_o2_resume(struct sdhci_pci_chip *chip) return sdhci_pci_resume_host(chip); } #endif + +static const struct sdhci_ops sdhci_pci_o2_ops = { + .set_clock = sdhci_pci_o2_set_clock, + .enable_dma = sdhci_pci_enable_dma, + .set_bus_width = sdhci_set_bus_width, + .reset = sdhci_reset, + .set_uhs_signaling = sdhci_set_uhs_signaling, +}; + +const struct sdhci_pci_fixes sdhci_o2 = { + .probe = sdhci_pci_o2_probe, + .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC, + .probe_slot = sdhci_pci_o2_probe_slot, +#ifdef CONFIG_PM_SLEEP + .resume = sdhci_pci_o2_resume, +#endif + .ops = &sdhci_pci_o2_ops, +}; diff --git a/drivers/mmc/host/sdhci-pci.h b/drivers/mmc/host/sdhci-pci.h index 2ef0bdca9197..4ddb69a15cd7 100644 --- a/drivers/mmc/host/sdhci-pci.h +++ b/drivers/mmc/host/sdhci-pci.h @@ -179,13 +179,9 @@ static inline void *sdhci_pci_priv(struct sdhci_pci_slot *slot) int sdhci_pci_resume_host(struct sdhci_pci_chip *chip); #endif int sdhci_pci_enable_dma(struct sdhci_host *host); -int sdhci_pci_o2_probe_slot(struct sdhci_pci_slot *slot); -int sdhci_pci_o2_probe(struct sdhci_pci_chip *chip); -#ifdef CONFIG_PM_SLEEP -int sdhci_pci_o2_resume(struct sdhci_pci_chip *chip); -#endif extern const struct sdhci_pci_fixes sdhci_arasan; extern const struct sdhci_pci_fixes sdhci_snps; +extern const struct sdhci_pci_fixes sdhci_o2; #endif /* __SDHCI_PCI_H */ diff --git a/drivers/mmc/host/sdhci-pxav2.c b/drivers/mmc/host/sdhci-pxav2.c index 2c3827f54927..cdc8e16b4567 100644 --- a/drivers/mmc/host/sdhci-pxav2.c +++ b/drivers/mmc/host/sdhci-pxav2.c @@ -23,7 +23,6 @@ #include <linux/clk.h> #include <linux/module.h> #include <linux/io.h> -#include <linux/gpio.h> #include <linux/mmc/card.h> #include <linux/mmc/host.h> #include <linux/platform_data/pxa_sdhci.h> diff --git a/drivers/mmc/host/sdhci-tegra.c b/drivers/mmc/host/sdhci-tegra.c index e6ace31e2a41..32e62904c0d3 100644 --- a/drivers/mmc/host/sdhci-tegra.c +++ b/drivers/mmc/host/sdhci-tegra.c @@ -33,6 +33,7 @@ #include <linux/ktime.h> #include "sdhci-pltfm.h" +#include "cqhci.h" /* Tegra SDHOST controller vendor register definitions */ #define SDHCI_TEGRA_VENDOR_CLOCK_CTRL 0x100 @@ -75,6 +76,7 @@ #define SDHCI_TEGRA_SDMEM_COMP_PADCTRL_VREF_SEL_MASK 0x0000000f #define SDHCI_TEGRA_SDMEM_COMP_PADCTRL_VREF_SEL_VAL 0x7 #define SDHCI_TEGRA_SDMEM_COMP_PADCTRL_E_INPUT_E_PWRD BIT(31) +#define SDHCI_COMP_PADCTRL_DRVUPDN_OFFSET_MASK 0x07FFF000 #define SDHCI_TEGRA_AUTO_CAL_STATUS 0x1ec #define SDHCI_TEGRA_AUTO_CAL_ACTIVE BIT(31) @@ -89,6 +91,9 @@ #define NVQUIRK_NEEDS_PAD_CONTROL BIT(7) #define NVQUIRK_DIS_CARD_CLK_CONFIG_TAP BIT(8) +/* SDMMC CQE Base Address for Tegra Host Ver 4.1 and Higher */ +#define SDHCI_TEGRA_CQE_BASE_ADDR 0xF000 + struct sdhci_tegra_soc_data { const struct sdhci_pltfm_data *pdata; u32 nvquirks; @@ -121,6 +126,8 @@ struct sdhci_tegra { struct pinctrl *pinctrl_sdmmc; struct pinctrl_state *pinctrl_state_3v3; struct pinctrl_state *pinctrl_state_1v8; + struct pinctrl_state *pinctrl_state_3v3_drv; + struct pinctrl_state *pinctrl_state_1v8_drv; struct sdhci_tegra_autocal_offsets autocal_offsets; ktime_t last_calib; @@ -128,6 +135,7 @@ struct sdhci_tegra { u32 default_tap; u32 default_trim; u32 dqs_trim; + bool enable_hwcq; }; static u16 tegra_sdhci_readw(struct sdhci_host *host, int reg) @@ -237,11 +245,6 @@ static void tegra210_sdhci_writew(struct sdhci_host *host, u16 val, int reg) } } -static unsigned int tegra_sdhci_get_ro(struct sdhci_host *host) -{ - return mmc_gpio_get_ro(host->mmc); -} - static bool tegra_sdhci_is_pad_and_regulator_valid(struct sdhci_host *host) { struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); @@ -411,6 +414,76 @@ static void tegra_sdhci_set_pad_autocal_offset(struct sdhci_host *host, sdhci_writel(host, reg, SDHCI_TEGRA_AUTO_CAL_CONFIG); } +static int tegra_sdhci_set_padctrl(struct sdhci_host *host, int voltage, + bool state_drvupdn) +{ + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct sdhci_tegra *tegra_host = sdhci_pltfm_priv(pltfm_host); + struct sdhci_tegra_autocal_offsets *offsets = + &tegra_host->autocal_offsets; + struct pinctrl_state *pinctrl_drvupdn = NULL; + int ret = 0; + u8 drvup = 0, drvdn = 0; + u32 reg; + + if (!state_drvupdn) { + /* PADS Drive Strength */ + if (voltage == MMC_SIGNAL_VOLTAGE_180) { + if (tegra_host->pinctrl_state_1v8_drv) { + pinctrl_drvupdn = + tegra_host->pinctrl_state_1v8_drv; + } else { + drvup = offsets->pull_up_1v8_timeout; + drvdn = offsets->pull_down_1v8_timeout; + } + } else { + if (tegra_host->pinctrl_state_3v3_drv) { + pinctrl_drvupdn = + tegra_host->pinctrl_state_3v3_drv; + } else { + drvup = offsets->pull_up_3v3_timeout; + drvdn = offsets->pull_down_3v3_timeout; + } + } + + if (pinctrl_drvupdn != NULL) { + ret = pinctrl_select_state(tegra_host->pinctrl_sdmmc, + pinctrl_drvupdn); + if (ret < 0) + dev_err(mmc_dev(host->mmc), + "failed pads drvupdn, ret: %d\n", ret); + } else if ((drvup) || (drvdn)) { + reg = sdhci_readl(host, + SDHCI_TEGRA_SDMEM_COMP_PADCTRL); + reg &= ~SDHCI_COMP_PADCTRL_DRVUPDN_OFFSET_MASK; + reg |= (drvup << 20) | (drvdn << 12); + sdhci_writel(host, reg, + SDHCI_TEGRA_SDMEM_COMP_PADCTRL); + } + + } else { + /* Dual Voltage PADS Voltage selection */ + if (!tegra_host->pad_control_available) + return 0; + + if (voltage == MMC_SIGNAL_VOLTAGE_180) { + ret = pinctrl_select_state(tegra_host->pinctrl_sdmmc, + tegra_host->pinctrl_state_1v8); + if (ret < 0) + dev_err(mmc_dev(host->mmc), + "setting 1.8V failed, ret: %d\n", ret); + } else { + ret = pinctrl_select_state(tegra_host->pinctrl_sdmmc, + tegra_host->pinctrl_state_3v3); + if (ret < 0) + dev_err(mmc_dev(host->mmc), + "setting 3.3V failed, ret: %d\n", ret); + } + } + + return ret; +} + static void tegra_sdhci_pad_autocalib(struct sdhci_host *host) { struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); @@ -437,6 +510,7 @@ static void tegra_sdhci_pad_autocalib(struct sdhci_host *host) pdpu = offsets.pull_down_3v3 << 8 | offsets.pull_up_3v3; } + /* Set initial offset before auto-calibration */ tegra_sdhci_set_pad_autocal_offset(host, pdpu); card_clk_enabled = tegra_sdhci_configure_card_clk(host, false); @@ -460,19 +534,15 @@ static void tegra_sdhci_pad_autocalib(struct sdhci_host *host) if (ret) { dev_err(mmc_dev(host->mmc), "Pad autocal timed out\n"); - if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_180) - pdpu = offsets.pull_down_1v8_timeout << 8 | - offsets.pull_up_1v8_timeout; - else - pdpu = offsets.pull_down_3v3_timeout << 8 | - offsets.pull_up_3v3_timeout; - - /* Disable automatic calibration and use fixed offsets */ + /* Disable automatic cal and use fixed Drive Strengths */ reg = sdhci_readl(host, SDHCI_TEGRA_AUTO_CAL_CONFIG); reg &= ~SDHCI_AUTO_CAL_ENABLE; sdhci_writel(host, reg, SDHCI_TEGRA_AUTO_CAL_CONFIG); - tegra_sdhci_set_pad_autocal_offset(host, pdpu); + ret = tegra_sdhci_set_padctrl(host, ios->signal_voltage, false); + if (ret < 0) + dev_err(mmc_dev(host->mmc), + "Setting drive strengths failed: %d\n", ret); } } @@ -511,26 +581,46 @@ static void tegra_sdhci_parse_pad_autocal_dt(struct sdhci_host *host) err = device_property_read_u32(host->mmc->parent, "nvidia,pad-autocal-pull-up-offset-3v3-timeout", &autocal->pull_up_3v3_timeout); - if (err) + if (err) { + if (!IS_ERR(tegra_host->pinctrl_state_3v3) && + (tegra_host->pinctrl_state_3v3_drv == NULL)) + pr_warn("%s: Missing autocal timeout 3v3-pad drvs\n", + mmc_hostname(host->mmc)); autocal->pull_up_3v3_timeout = 0; + } err = device_property_read_u32(host->mmc->parent, "nvidia,pad-autocal-pull-down-offset-3v3-timeout", &autocal->pull_down_3v3_timeout); - if (err) + if (err) { + if (!IS_ERR(tegra_host->pinctrl_state_3v3) && + (tegra_host->pinctrl_state_3v3_drv == NULL)) + pr_warn("%s: Missing autocal timeout 3v3-pad drvs\n", + mmc_hostname(host->mmc)); autocal->pull_down_3v3_timeout = 0; + } err = device_property_read_u32(host->mmc->parent, "nvidia,pad-autocal-pull-up-offset-1v8-timeout", &autocal->pull_up_1v8_timeout); - if (err) + if (err) { + if (!IS_ERR(tegra_host->pinctrl_state_1v8) && + (tegra_host->pinctrl_state_1v8_drv == NULL)) + pr_warn("%s: Missing autocal timeout 1v8-pad drvs\n", + mmc_hostname(host->mmc)); autocal->pull_up_1v8_timeout = 0; + } err = device_property_read_u32(host->mmc->parent, "nvidia,pad-autocal-pull-down-offset-1v8-timeout", &autocal->pull_down_1v8_timeout); - if (err) + if (err) { + if (!IS_ERR(tegra_host->pinctrl_state_1v8) && + (tegra_host->pinctrl_state_1v8_drv == NULL)) + pr_warn("%s: Missing autocal timeout 1v8-pad drvs\n", + mmc_hostname(host->mmc)); autocal->pull_down_1v8_timeout = 0; + } err = device_property_read_u32(host->mmc->parent, "nvidia,pad-autocal-pull-up-offset-sdr104", @@ -595,6 +685,20 @@ static void tegra_sdhci_parse_tap_and_trim(struct sdhci_host *host) tegra_host->dqs_trim = 0x11; } +static void tegra_sdhci_parse_dt(struct sdhci_host *host) +{ + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct sdhci_tegra *tegra_host = sdhci_pltfm_priv(pltfm_host); + + if (device_property_read_bool(host->mmc->parent, "supports-cqe")) + tegra_host->enable_hwcq = true; + else + tegra_host->enable_hwcq = false; + + tegra_sdhci_parse_pad_autocal_dt(host); + tegra_sdhci_parse_tap_and_trim(host); +} + static void tegra_sdhci_set_clock(struct sdhci_host *host, unsigned int clock) { struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); @@ -743,32 +847,6 @@ static int tegra_sdhci_execute_tuning(struct sdhci_host *host, u32 opcode) return mmc_send_tuning(host->mmc, opcode, NULL); } -static int tegra_sdhci_set_padctrl(struct sdhci_host *host, int voltage) -{ - struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); - struct sdhci_tegra *tegra_host = sdhci_pltfm_priv(pltfm_host); - int ret; - - if (!tegra_host->pad_control_available) - return 0; - - if (voltage == MMC_SIGNAL_VOLTAGE_180) { - ret = pinctrl_select_state(tegra_host->pinctrl_sdmmc, - tegra_host->pinctrl_state_1v8); - if (ret < 0) - dev_err(mmc_dev(host->mmc), - "setting 1.8V failed, ret: %d\n", ret); - } else { - ret = pinctrl_select_state(tegra_host->pinctrl_sdmmc, - tegra_host->pinctrl_state_3v3); - if (ret < 0) - dev_err(mmc_dev(host->mmc), - "setting 3.3V failed, ret: %d\n", ret); - } - - return ret; -} - static int sdhci_tegra_start_signal_voltage_switch(struct mmc_host *mmc, struct mmc_ios *ios) { @@ -778,7 +856,7 @@ static int sdhci_tegra_start_signal_voltage_switch(struct mmc_host *mmc, int ret = 0; if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_330) { - ret = tegra_sdhci_set_padctrl(host, ios->signal_voltage); + ret = tegra_sdhci_set_padctrl(host, ios->signal_voltage, true); if (ret < 0) return ret; ret = sdhci_start_signal_voltage_switch(mmc, ios); @@ -786,7 +864,7 @@ static int sdhci_tegra_start_signal_voltage_switch(struct mmc_host *mmc, ret = sdhci_start_signal_voltage_switch(mmc, ios); if (ret < 0) return ret; - ret = tegra_sdhci_set_padctrl(host, ios->signal_voltage); + ret = tegra_sdhci_set_padctrl(host, ios->signal_voltage, true); } if (tegra_host->pad_calib_required) @@ -805,6 +883,20 @@ static int tegra_sdhci_init_pinctrl_info(struct device *dev, return -1; } + tegra_host->pinctrl_state_1v8_drv = pinctrl_lookup_state( + tegra_host->pinctrl_sdmmc, "sdmmc-1v8-drv"); + if (IS_ERR(tegra_host->pinctrl_state_1v8_drv)) { + if (PTR_ERR(tegra_host->pinctrl_state_1v8_drv) == -ENODEV) + tegra_host->pinctrl_state_1v8_drv = NULL; + } + + tegra_host->pinctrl_state_3v3_drv = pinctrl_lookup_state( + tegra_host->pinctrl_sdmmc, "sdmmc-3v3-drv"); + if (IS_ERR(tegra_host->pinctrl_state_3v3_drv)) { + if (PTR_ERR(tegra_host->pinctrl_state_3v3_drv) == -ENODEV) + tegra_host->pinctrl_state_3v3_drv = NULL; + } + tegra_host->pinctrl_state_3v3 = pinctrl_lookup_state(tegra_host->pinctrl_sdmmc, "sdmmc-3v3"); if (IS_ERR(tegra_host->pinctrl_state_3v3)) { @@ -836,8 +928,50 @@ static void tegra_sdhci_voltage_switch(struct sdhci_host *host) tegra_host->pad_calib_required = true; } +static void sdhci_tegra_cqe_enable(struct mmc_host *mmc) +{ + struct cqhci_host *cq_host = mmc->cqe_private; + u32 cqcfg = 0; + + /* + * Tegra SDMMC Controller design prevents write access to BLOCK_COUNT + * registers when CQE is enabled. + */ + cqcfg = cqhci_readl(cq_host, CQHCI_CFG); + if (cqcfg & CQHCI_ENABLE) + cqhci_writel(cq_host, (cqcfg & ~CQHCI_ENABLE), CQHCI_CFG); + + sdhci_cqe_enable(mmc); + + if (cqcfg & CQHCI_ENABLE) + cqhci_writel(cq_host, cqcfg, CQHCI_CFG); +} + +static void sdhci_tegra_dumpregs(struct mmc_host *mmc) +{ + sdhci_dumpregs(mmc_priv(mmc)); +} + +static u32 sdhci_tegra_cqhci_irq(struct sdhci_host *host, u32 intmask) +{ + int cmd_error = 0; + int data_error = 0; + + if (!sdhci_cqe_irq(host, intmask, &cmd_error, &data_error)) + return intmask; + + cqhci_irq(host->mmc, intmask, cmd_error, data_error); + + return 0; +} + +static const struct cqhci_host_ops sdhci_tegra_cqhci_ops = { + .enable = sdhci_tegra_cqe_enable, + .disable = sdhci_cqe_disable, + .dumpregs = sdhci_tegra_dumpregs, +}; + static const struct sdhci_ops tegra_sdhci_ops = { - .get_ro = tegra_sdhci_get_ro, .read_w = tegra_sdhci_readw, .write_l = tegra_sdhci_writel, .set_clock = tegra_sdhci_set_clock, @@ -893,7 +1027,6 @@ static const struct sdhci_tegra_soc_data soc_data_tegra30 = { }; static const struct sdhci_ops tegra114_sdhci_ops = { - .get_ro = tegra_sdhci_get_ro, .read_w = tegra_sdhci_readw, .write_w = tegra_sdhci_writew, .write_l = tegra_sdhci_writel, @@ -947,7 +1080,6 @@ static const struct sdhci_tegra_soc_data soc_data_tegra124 = { }; static const struct sdhci_ops tegra210_sdhci_ops = { - .get_ro = tegra_sdhci_get_ro, .read_w = tegra_sdhci_readw, .write_w = tegra210_sdhci_writew, .write_l = tegra_sdhci_writel, @@ -980,7 +1112,6 @@ static const struct sdhci_tegra_soc_data soc_data_tegra210 = { }; static const struct sdhci_ops tegra186_sdhci_ops = { - .get_ro = tegra_sdhci_get_ro, .read_w = tegra_sdhci_readw, .write_l = tegra_sdhci_writel, .set_clock = tegra_sdhci_set_clock, @@ -989,6 +1120,7 @@ static const struct sdhci_ops tegra186_sdhci_ops = { .set_uhs_signaling = tegra_sdhci_set_uhs_signaling, .voltage_switch = tegra_sdhci_voltage_switch, .get_max_clock = tegra_sdhci_get_max_clock, + .irq = sdhci_tegra_cqhci_irq, }; static const struct sdhci_pltfm_data sdhci_tegra186_pdata = { @@ -1030,6 +1162,54 @@ static const struct of_device_id sdhci_tegra_dt_match[] = { }; MODULE_DEVICE_TABLE(of, sdhci_tegra_dt_match); +static int sdhci_tegra_add_host(struct sdhci_host *host) +{ + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct sdhci_tegra *tegra_host = sdhci_pltfm_priv(pltfm_host); + struct cqhci_host *cq_host; + bool dma64; + int ret; + + if (!tegra_host->enable_hwcq) + return sdhci_add_host(host); + + sdhci_enable_v4_mode(host); + + ret = sdhci_setup_host(host); + if (ret) + return ret; + + host->mmc->caps2 |= MMC_CAP2_CQE | MMC_CAP2_CQE_DCMD; + + cq_host = devm_kzalloc(host->mmc->parent, + sizeof(*cq_host), GFP_KERNEL); + if (!cq_host) { + ret = -ENOMEM; + goto cleanup; + } + + cq_host->mmio = host->ioaddr + SDHCI_TEGRA_CQE_BASE_ADDR; + cq_host->ops = &sdhci_tegra_cqhci_ops; + + dma64 = host->flags & SDHCI_USE_64_BIT_DMA; + if (dma64) + cq_host->caps |= CQHCI_TASK_DESC_SZ_128; + + ret = cqhci_init(cq_host, host->mmc, dma64); + if (ret) + goto cleanup; + + ret = __sdhci_add_host(host); + if (ret) + goto cleanup; + + return 0; + +cleanup: + sdhci_cleanup_host(host); + return ret; +} + static int sdhci_tegra_probe(struct platform_device *pdev) { const struct of_device_id *match; @@ -1077,9 +1257,7 @@ static int sdhci_tegra_probe(struct platform_device *pdev) if (tegra_host->soc_data->nvquirks & NVQUIRK_ENABLE_DDR50) host->mmc->caps |= MMC_CAP_1_8V_DDR; - tegra_sdhci_parse_pad_autocal_dt(host); - - tegra_sdhci_parse_tap_and_trim(host); + tegra_sdhci_parse_dt(host); tegra_host->power_gpio = devm_gpiod_get_optional(&pdev->dev, "power", GPIOD_OUT_HIGH); @@ -1117,7 +1295,7 @@ static int sdhci_tegra_probe(struct platform_device *pdev) usleep_range(2000, 4000); - rc = sdhci_add_host(host); + rc = sdhci_tegra_add_host(host); if (rc) goto err_add_host; diff --git a/drivers/mmc/host/sdhci-xenon-phy.c b/drivers/mmc/host/sdhci-xenon-phy.c index 5b5eb53a63d2..8d07ee1b8f08 100644 --- a/drivers/mmc/host/sdhci-xenon-phy.c +++ b/drivers/mmc/host/sdhci-xenon-phy.c @@ -530,7 +530,7 @@ static bool xenon_emmc_phy_slow_mode(struct sdhci_host *host, ret = true; break; } - /* else: fall through */ + /* fall through */ default: reg &= ~XENON_TIMING_ADJUST_SLOW_MODE; ret = false; diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index eba9bcc92ad3..a8141ff9be03 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -883,7 +883,7 @@ static u8 sdhci_calc_timeout(struct sdhci_host *host, struct mmc_command *cmd, bool *too_big) { u8 count; - struct mmc_data *data = cmd->data; + struct mmc_data *data; unsigned target_timeout, current_timeout; *too_big = true; @@ -897,6 +897,11 @@ static u8 sdhci_calc_timeout(struct sdhci_host *host, struct mmc_command *cmd, if (host->quirks & SDHCI_QUIRK_BROKEN_TIMEOUT_VAL) return 0xE; + /* Unspecified command, asume max */ + if (cmd == NULL) + return 0xE; + + data = cmd->data; /* Unspecified timeout, assume max */ if (!data && !cmd->busy_timeout) return 0xE; @@ -2048,6 +2053,8 @@ static int sdhci_check_ro(struct sdhci_host *host) is_readonly = 0; else if (host->ops->get_ro) is_readonly = host->ops->get_ro(host); + else if (mmc_can_gpio_ro(host->mmc)) + is_readonly = mmc_gpio_get_ro(host->mmc); else is_readonly = !(sdhci_readl(host, SDHCI_PRESENT_STATE) & SDHCI_WRITE_PROTECT); @@ -2376,6 +2383,10 @@ static int __sdhci_execute_tuning(struct sdhci_host *host, u32 opcode) return -ETIMEDOUT; } + /* Spec does not require a delay between tuning cycles */ + if (host->tuning_delay > 0) + mdelay(host->tuning_delay); + ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2); if (!(ctrl & SDHCI_CTRL_EXEC_TUNING)) { if (ctrl & SDHCI_CTRL_TUNED_CLK) @@ -2383,9 +2394,6 @@ static int __sdhci_execute_tuning(struct sdhci_host *host, u32 opcode) break; } - /* Spec does not require a delay between tuning cycles */ - if (host->tuning_delay > 0) - mdelay(host->tuning_delay); } pr_info("%s: Tuning failed, falling back to fixed sampling clock\n", @@ -3353,7 +3361,14 @@ void sdhci_cqe_enable(struct mmc_host *mmc) ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL); ctrl &= ~SDHCI_CTRL_DMA_MASK; - if (host->flags & SDHCI_USE_64_BIT_DMA) + /* + * Host from V4.10 supports ADMA3 DMA type. + * ADMA3 performs integrated descriptor which is more suitable + * for cmd queuing to fetch both command and transfer descriptors. + */ + if (host->v4_mode && (host->caps1 & SDHCI_CAN_DO_ADMA3)) + ctrl |= SDHCI_CTRL_ADMA3; + else if (host->flags & SDHCI_USE_64_BIT_DMA) ctrl |= SDHCI_CTRL_ADMA64; else ctrl |= SDHCI_CTRL_ADMA32; @@ -3363,7 +3378,7 @@ void sdhci_cqe_enable(struct mmc_host *mmc) SDHCI_BLOCK_SIZE); /* Set maximum timeout */ - sdhci_writeb(host, 0xE, SDHCI_TIMEOUT_CONTROL); + sdhci_set_timeout(host, NULL); host->ier = host->cqe_ier; diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h index 6cc9a3c2ac66..01002cba1359 100644 --- a/drivers/mmc/host/sdhci.h +++ b/drivers/mmc/host/sdhci.h @@ -73,6 +73,10 @@ #define SDHCI_SPACE_AVAILABLE 0x00000400 #define SDHCI_DATA_AVAILABLE 0x00000800 #define SDHCI_CARD_PRESENT 0x00010000 +#define SDHCI_CARD_PRES_SHIFT 16 +#define SDHCI_CD_STABLE 0x00020000 +#define SDHCI_CD_LVL 0x00040000 +#define SDHCI_CD_LVL_SHIFT 18 #define SDHCI_WRITE_PROTECT 0x00080000 #define SDHCI_DATA_LVL_MASK 0x00F00000 #define SDHCI_DATA_LVL_SHIFT 20 @@ -88,6 +92,7 @@ #define SDHCI_CTRL_ADMA1 0x08 #define SDHCI_CTRL_ADMA32 0x10 #define SDHCI_CTRL_ADMA64 0x18 +#define SDHCI_CTRL_ADMA3 0x18 #define SDHCI_CTRL_8BITBUS 0x20 #define SDHCI_CTRL_CDTEST_INS 0x40 #define SDHCI_CTRL_CDTEST_EN 0x80 @@ -230,6 +235,7 @@ #define SDHCI_RETUNING_MODE_SHIFT 14 #define SDHCI_CLOCK_MUL_MASK 0x00FF0000 #define SDHCI_CLOCK_MUL_SHIFT 16 +#define SDHCI_CAN_DO_ADMA3 0x08000000 #define SDHCI_SUPPORT_HS400 0x80000000 /* Non-standard */ #define SDHCI_CAPABILITIES_1 0x44 diff --git a/drivers/mmc/host/sdhci_am654.c b/drivers/mmc/host/sdhci_am654.c index 8c05879850a0..eea183e90f1b 100644 --- a/drivers/mmc/host/sdhci_am654.c +++ b/drivers/mmc/host/sdhci_am654.c @@ -158,7 +158,7 @@ static void sdhci_am654_set_power(struct sdhci_host *host, unsigned char mode, sdhci_set_power_noreg(host, mode, vdd); } -struct sdhci_ops sdhci_am654_ops = { +static struct sdhci_ops sdhci_am654_ops = { .get_max_clock = sdhci_pltfm_clk_get_max_clock, .get_timeout_clock = sdhci_pltfm_clk_get_max_clock, .set_uhs_signaling = sdhci_set_uhs_signaling, diff --git a/drivers/mmc/host/sunxi-mmc.c b/drivers/mmc/host/sunxi-mmc.c index 70fadc976795..2901a5773d83 100644 --- a/drivers/mmc/host/sunxi-mmc.c +++ b/drivers/mmc/host/sunxi-mmc.c @@ -19,7 +19,6 @@ #include <linux/device.h> #include <linux/dma-mapping.h> #include <linux/err.h> -#include <linux/gpio.h> #include <linux/interrupt.h> #include <linux/io.h> #include <linux/kernel.h> @@ -32,7 +31,6 @@ #include <linux/mmc/slot-gpio.h> #include <linux/module.h> #include <linux/of_address.h> -#include <linux/of_gpio.h> #include <linux/of_platform.h> #include <linux/platform_device.h> #include <linux/pm_runtime.h> diff --git a/drivers/mmc/host/tmio_mmc_core.c b/drivers/mmc/host/tmio_mmc_core.c index f7a6f005899a..595949f1f001 100644 --- a/drivers/mmc/host/tmio_mmc_core.c +++ b/drivers/mmc/host/tmio_mmc_core.c @@ -1073,7 +1073,7 @@ static int tmio_mmc_init_ocr(struct tmio_mmc_host *host) /* use ocr_mask if no regulator */ if (!mmc->ocr_avail) - mmc->ocr_avail = pdata->ocr_mask; + mmc->ocr_avail = pdata->ocr_mask; /* * try again. @@ -1294,6 +1294,7 @@ void tmio_mmc_host_remove(struct tmio_mmc_host *host) cancel_delayed_work_sync(&host->delayed_reset_work); tmio_mmc_release_dma(host); + pm_runtime_dont_use_autosuspend(&pdev->dev); pm_runtime_put_sync(&pdev->dev); pm_runtime_disable(&pdev->dev); } diff --git a/drivers/mmc/host/wmt-sdmmc.c b/drivers/mmc/host/wmt-sdmmc.c index 3ba42f508014..4fd6da29489e 100644 --- a/drivers/mmc/host/wmt-sdmmc.c +++ b/drivers/mmc/host/wmt-sdmmc.c @@ -19,7 +19,6 @@ #include <linux/io.h> #include <linux/irq.h> #include <linux/clk.h> -#include <linux/gpio.h> #include <linux/interrupt.h> #include <linux/of.h> diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h index 8ef330027b13..19566ab9decb 100644 --- a/include/linux/mmc/card.h +++ b/include/linux/mmc/card.h @@ -133,6 +133,8 @@ struct mmc_ext_csd { struct sd_scr { unsigned char sda_vsn; unsigned char sda_spec3; + unsigned char sda_spec4; + unsigned char sda_specx; unsigned char bus_widths; #define SD_SCR_BUS_WIDTH_1 (1<<0) #define SD_SCR_BUS_WIDTH_4 (1<<2) @@ -277,6 +279,7 @@ struct mmc_card { unsigned int erase_shift; /* if erase unit is power 2 */ unsigned int pref_erase; /* in sectors */ unsigned int eg_boundary; /* don't cross erase-group boundaries */ + unsigned int erase_arg; /* erase / trim / discard */ u8 erased_byte; /* value of erased bytes */ u32 raw_cid[4]; /* raw card CID */ diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index 4d35ff36ceff..43d0f0c496f6 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -478,6 +478,11 @@ static inline void *mmc_priv(struct mmc_host *host) return (void *)host->private; } +static inline struct mmc_host *mmc_from_priv(void *priv) +{ + return container_of(priv, struct mmc_host, private); +} + #define mmc_host_is_spi(host) ((host)->caps & MMC_CAP_SPI) #define mmc_dev(x) ((x)->parent) @@ -502,17 +507,11 @@ void sdio_run_irqs(struct mmc_host *host); void sdio_signal_irq(struct mmc_host *host); #ifdef CONFIG_REGULATOR -int mmc_regulator_get_ocrmask(struct regulator *supply); int mmc_regulator_set_ocr(struct mmc_host *mmc, struct regulator *supply, unsigned short vdd_bit); int mmc_regulator_set_vqmmc(struct mmc_host *mmc, struct mmc_ios *ios); #else -static inline int mmc_regulator_get_ocrmask(struct regulator *supply) -{ - return 0; -} - static inline int mmc_regulator_set_ocr(struct mmc_host *mmc, struct regulator *supply, unsigned short vdd_bit) @@ -527,7 +526,6 @@ static inline int mmc_regulator_set_vqmmc(struct mmc_host *mmc, } #endif -u32 mmc_vddrange_to_ocrmask(int vdd_min, int vdd_max); int mmc_regulator_get_supply(struct mmc_host *mmc); static inline int mmc_card_is_removable(struct mmc_host *host) diff --git a/include/linux/mmc/sd.h b/include/linux/mmc/sd.h index 1ebcf9ba1256..ec94a5aa02bb 100644 --- a/include/linux/mmc/sd.h +++ b/include/linux/mmc/sd.h @@ -91,4 +91,10 @@ #define SD_SWITCH_ACCESS_DEF 0 #define SD_SWITCH_ACCESS_HS 1 +/* + * Erase/discard + */ +#define SD_ERASE_ARG 0x00000000 +#define SD_DISCARD_ARG 0x00000001 + #endif /* LINUX_MMC_SD_H */ diff --git a/include/linux/mmc/slot-gpio.h b/include/linux/mmc/slot-gpio.h index feebd7aa6f5c..9fd3ce64a885 100644 --- a/include/linux/mmc/slot-gpio.h +++ b/include/linux/mmc/slot-gpio.h @@ -22,7 +22,7 @@ int mmc_gpiod_request_cd(struct mmc_host *host, const char *con_id, unsigned int idx, bool override_active_level, unsigned int debounce, bool *gpio_invert); int mmc_gpiod_request_ro(struct mmc_host *host, const char *con_id, - unsigned int idx, bool override_active_level, + unsigned int idx, unsigned int debounce, bool *gpio_invert); void mmc_gpio_set_cd_isr(struct mmc_host *host, irqreturn_t (*isr)(int irq, void *dev_id)); |