diff options
27 files changed, 2591 insertions, 7 deletions
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 5e001ad588a7..5624fb060d9d 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -699,3 +699,7 @@ source "crypto/Kconfig" config PPC_CLOCK bool default n + +config PPC_LIB_RHEAP + bool + diff --git a/arch/powerpc/boot/dts/lite5200b.dts b/arch/powerpc/boot/dts/lite5200b.dts index a6bb1d0558ef..6582c9a39b27 100644 --- a/arch/powerpc/boot/dts/lite5200b.dts +++ b/arch/powerpc/boot/dts/lite5200b.dts @@ -277,10 +277,26 @@ ethernet@3000 { device_type = "network"; compatible = "mpc5200b-fec","mpc5200-fec"; - reg = <3000 800>; + reg = <3000 400>; mac-address = [ 02 03 04 05 06 07 ]; // Bad! interrupts = <2 5 0>; interrupt-parent = <&mpc5200_pic>; + phy-handle = <&phy0>; + }; + + mdio@3000 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "mdio"; + compatible = "mpc5200b-fec-phy"; + reg = <3000 400>; // fec range, since we need to setup fec interrupts + interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co. + interrupt-parent = <&mpc5200_pic>; + + phy0:ethernet-phy@0 { + device_type = "ethernet-phy"; + reg = <0>; + }; }; ata@3a00 { diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile index 65d492e316a6..4bb023f4c869 100644 --- a/arch/powerpc/lib/Makefile +++ b/arch/powerpc/lib/Makefile @@ -14,7 +14,6 @@ endif obj-$(CONFIG_PPC64) += copypage_64.o copyuser_64.o \ memcpy_64.o usercopy_64.o mem_64.o string.o -obj-$(CONFIG_QUICC_ENGINE) += rheap.o obj-$(CONFIG_XMON) += sstep.o obj-$(CONFIG_KPROBES) += sstep.o obj-$(CONFIG_NOT_COHERENT_CACHE) += dma-noncoherent.o @@ -23,6 +22,4 @@ ifeq ($(CONFIG_PPC64),y) obj-$(CONFIG_SMP) += locks.o endif -# Temporary hack until we have migrated to asm-powerpc -obj-$(CONFIG_8xx) += rheap.o -obj-$(CONFIG_CPM2) += rheap.o +obj-$(CONFIG_PPC_LIB_RHEAP) += rheap.o diff --git a/arch/powerpc/lib/rheap.c b/arch/powerpc/lib/rheap.c index ada5b42dd231..22c3b4f53de7 100644 --- a/arch/powerpc/lib/rheap.c +++ b/arch/powerpc/lib/rheap.c @@ -15,6 +15,7 @@ #include <linux/types.h> #include <linux/errno.h> #include <linux/kernel.h> +#include <linux/module.h> #include <linux/mm.h> #include <linux/err.h> #include <linux/slab.h> @@ -275,6 +276,7 @@ rh_info_t *rh_create(unsigned int alignment) return info; } +EXPORT_SYMBOL_GPL(rh_create); /* * Destroy a dynamically created remote heap. Deallocate only if the areas @@ -288,6 +290,7 @@ void rh_destroy(rh_info_t * info) if ((info->flags & RHIF_STATIC_INFO) == 0) kfree(info); } +EXPORT_SYMBOL_GPL(rh_destroy); /* * Initialize in place a remote heap info block. This is needed to support @@ -320,6 +323,7 @@ void rh_init(rh_info_t * info, unsigned int alignment, int max_blocks, for (i = 0, blk = block; i < max_blocks; i++, blk++) list_add(&blk->list, &info->empty_list); } +EXPORT_SYMBOL_GPL(rh_init); /* Attach a free memory region, coalesces regions if adjuscent */ int rh_attach_region(rh_info_t * info, unsigned long start, int size) @@ -360,6 +364,7 @@ int rh_attach_region(rh_info_t * info, unsigned long start, int size) return 0; } +EXPORT_SYMBOL_GPL(rh_attach_region); /* Detatch given address range, splits free block if needed. */ unsigned long rh_detach_region(rh_info_t * info, unsigned long start, int size) @@ -428,6 +433,7 @@ unsigned long rh_detach_region(rh_info_t * info, unsigned long start, int size) return s; } +EXPORT_SYMBOL_GPL(rh_detach_region); /* Allocate a block of memory at the specified alignment. The value returned * is an offset into the buffer initialized by rh_init(), or a negative number @@ -502,6 +508,7 @@ unsigned long rh_alloc_align(rh_info_t * info, int size, int alignment, const ch return start; } +EXPORT_SYMBOL_GPL(rh_alloc_align); /* Allocate a block of memory at the default alignment. The value returned is * an offset into the buffer initialized by rh_init(), or a negative number if @@ -511,6 +518,7 @@ unsigned long rh_alloc(rh_info_t * info, int size, const char *owner) { return rh_alloc_align(info, size, info->alignment, owner); } +EXPORT_SYMBOL_GPL(rh_alloc); /* Allocate a block of memory at the given offset, rounded up to the default * alignment. The value returned is an offset into the buffer initialized by @@ -594,6 +602,7 @@ unsigned long rh_alloc_fixed(rh_info_t * info, unsigned long start, int size, co return start; } +EXPORT_SYMBOL_GPL(rh_alloc_fixed); /* Deallocate the memory previously allocated by one of the rh_alloc functions. * The return value is the size of the deallocated block, or a negative number @@ -626,6 +635,7 @@ int rh_free(rh_info_t * info, unsigned long start) return size; } +EXPORT_SYMBOL_GPL(rh_free); int rh_get_stats(rh_info_t * info, int what, int max_stats, rh_stats_t * stats) { @@ -663,6 +673,7 @@ int rh_get_stats(rh_info_t * info, int what, int max_stats, rh_stats_t * stats) return nr; } +EXPORT_SYMBOL_GPL(rh_get_stats); int rh_set_owner(rh_info_t * info, unsigned long start, const char *owner) { @@ -687,6 +698,7 @@ int rh_set_owner(rh_info_t * info, unsigned long start, const char *owner) return size; } +EXPORT_SYMBOL_GPL(rh_set_owner); void rh_dump(rh_info_t * info) { @@ -722,6 +734,7 @@ void rh_dump(rh_info_t * info) st[i].size, st[i].owner != NULL ? st[i].owner : ""); printk(KERN_INFO "\n"); } +EXPORT_SYMBOL_GPL(rh_dump); void rh_dump_blk(rh_info_t * info, rh_block_t * blk) { @@ -729,3 +742,5 @@ void rh_dump_blk(rh_info_t * info, rh_block_t * blk) "blk @0x%p: 0x%lx-0x%lx (%u)\n", blk, blk->start, blk->start + blk->size, blk->size); } +EXPORT_SYMBOL_GPL(rh_dump_blk); + diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig index 186397f283bb..229d355ed86a 100644 --- a/arch/powerpc/platforms/Kconfig +++ b/arch/powerpc/platforms/Kconfig @@ -264,6 +264,7 @@ config TAU_AVERAGE config QUICC_ENGINE bool + select PPC_LIB_RHEAP help The QUICC Engine (QE) is a new generation of communications coprocessors on Freescale embedded CPUs (akin to CPM in older chips). @@ -274,6 +275,7 @@ config CPM2 bool default n select CPM + select PPC_LIB_RHEAP help The CPM2 (Communications Processor Module) is a coprocessor on embedded CPUs made by Freescale. Selecting this option means that @@ -313,4 +315,6 @@ config FSL_ULI1575 config CPM bool +source "arch/powerpc/sysdev/bestcomm/Kconfig" + endmenu diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype index 4c315be25015..3c7325ec36ec 100644 --- a/arch/powerpc/platforms/Kconfig.cputype +++ b/arch/powerpc/platforms/Kconfig.cputype @@ -37,6 +37,7 @@ config PPC_8xx select FSL_SOC select 8xx select WANT_DEVICE_TREE + select PPC_LIB_RHEAP config 40x bool "AMCC 40x" diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile index 1a6f5641ebc8..99a77d743d48 100644 --- a/arch/powerpc/sysdev/Makefile +++ b/arch/powerpc/sysdev/Makefile @@ -14,6 +14,7 @@ obj-$(CONFIG_FSL_SOC) += fsl_soc.o obj-$(CONFIG_FSL_PCI) += fsl_pci.o obj-$(CONFIG_TSI108_BRIDGE) += tsi108_pci.o tsi108_dev.o obj-$(CONFIG_QUICC_ENGINE) += qe_lib/ +obj-$(CONFIG_PPC_BESTCOMM) += bestcomm/ mv64x60-$(CONFIG_PCI) += mv64x60_pci.o obj-$(CONFIG_MV64X60) += $(mv64x60-y) mv64x60_pic.o mv64x60_dev.o \ mv64x60_udbg.o diff --git a/arch/powerpc/sysdev/bestcomm/Kconfig b/arch/powerpc/sysdev/bestcomm/Kconfig new file mode 100644 index 000000000000..57cc56562567 --- /dev/null +++ b/arch/powerpc/sysdev/bestcomm/Kconfig @@ -0,0 +1,39 @@ +# +# Kconfig options for Bestcomm +# + +config PPC_BESTCOMM + tristate "Bestcomm DMA engine support" + depends on PPC_MPC52xx + default n + select PPC_LIB_RHEAP + help + BestComm is the name of the communication coprocessor found + on the Freescale MPC5200 family of processor. It's usage is + optionnal for some drivers (like ATA), but required for + others (like FEC). + + If you want to use drivers that require DMA operations, + answer Y or M. Otherwise say N. + +config PPC_BESTCOMM_ATA + tristate "Bestcomm ATA task support" + depends on PPC_BESTCOMM + default n + help + This option enables the support for the ATA task. + +config PPC_BESTCOMM_FEC + tristate "Bestcomm FEC tasks support" + depends on PPC_BESTCOMM + default n + help + This option enables the support for the FEC tasks. + +config PPC_BESTCOMM_GEN_BD + tristate "Bestcomm GenBD tasks support" + depends on PPC_BESTCOMM + default n + help + This option enables the support for the GenBD tasks. + diff --git a/arch/powerpc/sysdev/bestcomm/Makefile b/arch/powerpc/sysdev/bestcomm/Makefile new file mode 100644 index 000000000000..aed2df2a6580 --- /dev/null +++ b/arch/powerpc/sysdev/bestcomm/Makefile @@ -0,0 +1,14 @@ +# +# Makefile for BestComm & co +# + +bestcomm-core-objs := bestcomm.o sram.o +bestcomm-ata-objs := ata.o bcom_ata_task.o +bestcomm-fec-objs := fec.o bcom_fec_rx_task.o bcom_fec_tx_task.o +bestcomm-gen-bd-objs := gen_bd.o bcom_gen_bd_rx_task.o bcom_gen_bd_tx_task.o + +obj-$(CONFIG_PPC_BESTCOMM) += bestcomm-core.o +obj-$(CONFIG_PPC_BESTCOMM_ATA) += bestcomm-ata.o +obj-$(CONFIG_PPC_BESTCOMM_FEC) += bestcomm-fec.o +obj-$(CONFIG_PPC_BESTCOMM_GEN_BD) += bestcomm-gen-bd.o + diff --git a/arch/powerpc/sysdev/bestcomm/ata.c b/arch/powerpc/sysdev/bestcomm/ata.c new file mode 100644 index 000000000000..1f5258fb38c3 --- /dev/null +++ b/arch/powerpc/sysdev/bestcomm/ata.c @@ -0,0 +1,154 @@ +/* + * Bestcomm ATA task driver + * + * + * Patterned after bestcomm/fec.c by Dale Farnsworth <dfarnsworth@mvista.com> + * 2003-2004 (c) MontaVista, Software, Inc. + * + * Copyright (C) 2006-2007 Sylvain Munaut <tnt@246tNt.com> + * Copyright (C) 2006 Freescale - John Rigby + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/types.h> +#include <asm/io.h> + +#include "bestcomm.h" +#include "bestcomm_priv.h" +#include "ata.h" + + +/* ======================================================================== */ +/* Task image/var/inc */ +/* ======================================================================== */ + +/* ata task image */ +extern u32 bcom_ata_task[]; + +/* ata task vars that need to be set before enabling the task */ +struct bcom_ata_var { + u32 enable; /* (u16*) address of task's control register */ + u32 bd_base; /* (struct bcom_bd*) beginning of ring buffer */ + u32 bd_last; /* (struct bcom_bd*) end of ring buffer */ + u32 bd_start; /* (struct bcom_bd*) current bd */ + u32 buffer_size; /* size of receive buffer */ +}; + +/* ata task incs that need to be set before enabling the task */ +struct bcom_ata_inc { + u16 pad0; + s16 incr_bytes; + u16 pad1; + s16 incr_dst; + u16 pad2; + s16 incr_src; +}; + + +/* ======================================================================== */ +/* Task support code */ +/* ======================================================================== */ + +struct bcom_task * +bcom_ata_init(int queue_len, int maxbufsize) +{ + struct bcom_task *tsk; + struct bcom_ata_var *var; + struct bcom_ata_inc *inc; + + tsk = bcom_task_alloc(queue_len, sizeof(struct bcom_ata_bd), 0); + if (!tsk) + return NULL; + + tsk->flags = BCOM_FLAGS_NONE; + + bcom_ata_reset_bd(tsk); + + var = (struct bcom_ata_var *) bcom_task_var(tsk->tasknum); + inc = (struct bcom_ata_inc *) bcom_task_inc(tsk->tasknum); + + if (bcom_load_image(tsk->tasknum, bcom_ata_task)) { + bcom_task_free(tsk); + return NULL; + } + + var->enable = bcom_eng->regs_base + + offsetof(struct mpc52xx_sdma, tcr[tsk->tasknum]); + var->bd_base = tsk->bd_pa; + var->bd_last = tsk->bd_pa + ((tsk->num_bd-1) * tsk->bd_size); + var->bd_start = tsk->bd_pa; + var->buffer_size = maxbufsize; + + /* Configure some stuff */ + bcom_set_task_pragma(tsk->tasknum, BCOM_ATA_PRAGMA); + bcom_set_task_auto_start(tsk->tasknum, tsk->tasknum); + + out_8(&bcom_eng->regs->ipr[BCOM_INITIATOR_ATA_RX], BCOM_IPR_ATA_RX); + out_8(&bcom_eng->regs->ipr[BCOM_INITIATOR_ATA_TX], BCOM_IPR_ATA_TX); + + out_be32(&bcom_eng->regs->IntPend, 1<<tsk->tasknum); /* Clear ints */ + + return tsk; +} +EXPORT_SYMBOL_GPL(bcom_ata_init); + +void bcom_ata_rx_prepare(struct bcom_task *tsk) +{ + struct bcom_ata_inc *inc; + + inc = (struct bcom_ata_inc *) bcom_task_inc(tsk->tasknum); + + inc->incr_bytes = -(s16)sizeof(u32); + inc->incr_src = 0; + inc->incr_dst = sizeof(u32); + + bcom_set_initiator(tsk->tasknum, BCOM_INITIATOR_ATA_RX); +} +EXPORT_SYMBOL_GPL(bcom_ata_rx_prepare); + +void bcom_ata_tx_prepare(struct bcom_task *tsk) +{ + struct bcom_ata_inc *inc; + + inc = (struct bcom_ata_inc *) bcom_task_inc(tsk->tasknum); + + inc->incr_bytes = -(s16)sizeof(u32); + inc->incr_src = sizeof(u32); + inc->incr_dst = 0; + + bcom_set_initiator(tsk->tasknum, BCOM_INITIATOR_ATA_TX); +} +EXPORT_SYMBOL_GPL(bcom_ata_tx_prepare); + +void bcom_ata_reset_bd(struct bcom_task *tsk) +{ + struct bcom_ata_var *var; + + /* Reset all BD */ + memset(tsk->bd, 0x00, tsk->num_bd * tsk->bd_size); + + tsk->index = 0; + tsk->outdex = 0; + + var = (struct bcom_ata_var *) bcom_task_var(tsk->tasknum); + var->bd_start = var->bd_base; +} +EXPORT_SYMBOL_GPL(bcom_ata_reset_bd); + +void bcom_ata_release(struct bcom_task *tsk) +{ + /* Nothing special for the ATA tasks */ + bcom_task_free(tsk); +} +EXPORT_SYMBOL_GPL(bcom_ata_release); + + +MODULE_DESCRIPTION("BestComm ATA task driver"); +MODULE_AUTHOR("John Rigby"); +MODULE_LICENSE("GPL v2"); + diff --git a/arch/powerpc/sysdev/bestcomm/ata.h b/arch/powerpc/sysdev/bestcomm/ata.h new file mode 100644 index 000000000000..10982769c465 --- /dev/null +++ b/arch/powerpc/sysdev/bestcomm/ata.h @@ -0,0 +1,37 @@ +/* + * Header for Bestcomm ATA task driver + * + * + * Copyright (C) 2006 Freescale - John Rigby + * Copyright (C) 2006 Sylvain Munaut <tnt@246tNt.com> + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#ifndef __BESTCOMM_ATA_H__ +#define __BESTCOMM_ATA_H__ + + +struct bcom_ata_bd { + u32 status; + u32 dst_pa; + u32 src_pa; +}; + +extern struct bcom_task * +bcom_ata_init(int queue_len, int maxbufsize); + +extern void +bcom_ata_rx_prepare(struct bcom_task *tsk); + +extern void +bcom_ata_tx_prepare(struct bcom_task *tsk); + +extern void +bcom_ata_reset_bd(struct bcom_task *tsk); + + +#endif /* __BESTCOMM_ATA_H__ */ + diff --git a/arch/powerpc/sysdev/bestcomm/bcom_ata_task.c b/arch/powerpc/sysdev/bestcomm/bcom_ata_task.c new file mode 100644 index 000000000000..cc6049a4e469 --- /dev/null +++ b/arch/powerpc/sysdev/bestcomm/bcom_ata_task.c @@ -0,0 +1,67 @@ +/* + * Bestcomm ATA task microcode + * + * Copyright (c) 2004 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Created based on bestcom/code_dma/image_rtos1/dma_image.hex + */ + +#include <asm/types.h> + +/* + * The header consists of the following fields: + * u32 magic; + * u8 desc_size; + * u8 var_size; + * u8 inc_size; + * u8 first_var; + * u8 reserved[8]; + * + * The size fields contain the number of 32-bit words. + */ + +u32 bcom_ata_task[] = { + /* header */ + 0x4243544b, + 0x0e060709, + 0x00000000, + 0x00000000, + + /* Task descriptors */ + 0x8198009b, /* LCD: idx0 = var3; idx0 <= var2; idx0 += inc3 */ + 0x13e00c08, /* DRD1A: var3 = var1; FN=0 MORE init=31 WS=0 RS=0 */ + 0xb8000264, /* LCD: idx1 = *idx0, idx2 = var0; idx1 < var9; idx1 += inc4, idx2 += inc4 */ + 0x10000f00, /* DRD1A: var3 = idx0; FN=0 MORE init=0 WS=0 RS=0 */ + 0x60140002, /* DRD2A: EU0=0 EU1=0 EU2=0 EU3=2 EXT init=0 WS=2 RS=2 */ + 0x0c8cfc8a, /* DRD2B1: *idx2 = EU3(); EU3(*idx2,var10) */ + 0xd8988240, /* LCDEXT: idx1 = idx1; idx1 > var9; idx1 += inc0 */ + 0xf845e011, /* LCDEXT: idx2 = *(idx0 + var00000015); ; idx2 += inc2 */ + 0xb845e00a, /* LCD: idx3 = *(idx0 + var00000019); ; idx3 += inc1 */ + 0x0bfecf90, /* DRD1A: *idx3 = *idx2; FN=0 TFD init=31 WS=3 RS=3 */ + 0x9898802d, /* LCD: idx1 = idx1; idx1 once var0; idx1 += inc5 */ + 0x64000005, /* DRD2A: EU0=0 EU1=0 EU2=0 EU3=5 INT EXT init=0 WS=0 RS=0 */ + 0x0c0cf849, /* DRD2B1: *idx0 = EU3(); EU3(idx1,var9) */ + 0x000001f8, /* NOP */ + + /* VAR[9]-VAR[14] */ + 0x40000000, + 0x7fff7fff, + 0x00000000, + 0x00000000, + 0x00000000, + 0x00000000, + + /* INC[0]-INC[6] */ + 0x40000000, + 0xe0000000, + 0xe0000000, + 0xa000000c, + 0x20000000, + 0x00000000, + 0x00000000, +}; + diff --git a/arch/powerpc/sysdev/bestcomm/bcom_fec_rx_task.c b/arch/powerpc/sysdev/bestcomm/bcom_fec_rx_task.c new file mode 100644 index 000000000000..a1ad6a02fcef --- /dev/null +++ b/arch/powerpc/sysdev/bestcomm/bcom_fec_rx_task.c @@ -0,0 +1,78 @@ +/* + * Bestcomm FEC RX task microcode + * + * Copyright (c) 2004 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Automatically created based on BestCommAPI-2.2/code_dma/image_rtos1/dma_image.hex + * on Tue Mar 22 11:19:38 2005 GMT + */ + +#include <asm/types.h> + +/* + * The header consists of the following fields: + * u32 magic; + * u8 desc_size; + * u8 var_size; + * u8 inc_size; + * u8 first_var; + * u8 reserved[8]; + * + * The size fields contain the number of 32-bit words. + */ + +u32 bcom_fec_rx_task[] = { + /* header */ + 0x4243544b, + 0x18060709, + 0x00000000, + 0x00000000, + + /* Task descriptors */ + 0x808220e3, /* LCD: idx0 = var1, idx1 = var4; idx1 <= var3; idx0 += inc4, idx1 += inc3 */ + 0x10601010, /* DRD1A: var4 = var2; FN=0 MORE init=3 WS=0 RS=0 */ + 0xb8800264, /* LCD: idx2 = *idx1, idx3 = var0; idx2 < var9; idx2 += inc4, idx3 += inc4 */ + 0x10001308, /* DRD1A: var4 = idx1; FN=0 MORE init=0 WS=0 RS=0 */ + 0x60140002, /* DRD2A: EU0=0 EU1=0 EU2=0 EU3=2 EXT init=0 WS=2 RS=2 */ + 0x0cccfcca, /* DRD2B1: *idx3 = EU3(); EU3(*idx3,var10) */ + 0x80004000, /* LCDEXT: idx2 = 0x00000000; ; */ + 0xb8c58029, /* LCD: idx3 = *(idx1 + var00000015); idx3 once var0; idx3 += inc5 */ + 0x60000002, /* DRD2A: EU0=0 EU1=0 EU2=0 EU3=2 EXT init=0 WS=0 RS=0 */ + 0x088cf8cc, /* DRD2B1: idx2 = EU3(); EU3(idx3,var12) */ + 0x991982f2, /* LCD: idx2 = idx2, idx3 = idx3; idx2 > var11; idx2 += inc6, idx3 += inc2 */ + 0x006acf80, /* DRD1A: *idx3 = *idx0; FN=0 init=3 WS=1 RS=1 */ + 0x80004000, /* LCDEXT: idx2 = 0x00000000; ; */ + 0x9999802d, /* LCD: idx3 = idx3; idx3 once var0; idx3 += inc5 */ + 0x70000002, /* DRD2A: EU0=0 EU1=0 EU2=0 EU3=2 EXT MORE init=0 WS=0 RS=0 */ + 0x034cfc4e, /* DRD2B1: var13 = EU3(); EU3(*idx1,var14) */ + 0x00008868, /* DRD1A: idx2 = var13; FN=0 init=0 WS=0 RS=0 */ + 0x99198341, /* LCD: idx2 = idx2, idx3 = idx3; idx2 > var13; idx2 += inc0, idx3 += inc1 */ + 0x007ecf80, /* DRD1A: *idx3 = *idx0; FN=0 init=3 WS=3 RS=3 */ + 0x99198272, /* LCD: idx2 = idx2, idx3 = idx3; idx2 > var9; idx2 += inc6, idx3 += inc2 */ + 0x046acf80, /* DRD1A: *idx3 = *idx0; FN=0 INT init=3 WS=1 RS=1 */ + 0x9819002d, /* LCD: idx2 = idx0; idx2 once var0; idx2 += inc5 */ + 0x0060c790, /* DRD1A: *idx1 = *idx2; FN=0 init=3 WS=0 RS=0 */ + 0x000001f8, /* NOP */ + + /* VAR[9]-VAR[14] */ + 0x40000000, + 0x7fff7fff, + 0x00000000, + 0x00000003, + 0x40000008, + 0x43ffffff, + + /* INC[0]-INC[6] */ + 0x40000000, + 0xe0000000, + 0xe0000000, + 0xa0000008, + 0x20000000, + 0x00000000, + 0x4000ffff, +}; + diff --git a/arch/powerpc/sysdev/bestcomm/bcom_fec_tx_task.c b/arch/powerpc/sysdev/bestcomm/bcom_fec_tx_task.c new file mode 100644 index 000000000000..b1c495c3a65a --- /dev/null +++ b/arch/powerpc/sysdev/bestcomm/bcom_fec_tx_task.c @@ -0,0 +1,91 @@ +/* + * Bestcomm FEC TX task microcode + * + * Copyright (c) 2004 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Automatically created based on BestCommAPI-2.2/code_dma/image_rtos1/dma_image.hex + * on Tue Mar 22 11:19:29 2005 GMT + */ + +#include <asm/types.h> + +/* + * The header consists of the following fields: + * u32 magic; + * u8 desc_size; + * u8 var_size; + * u8 inc_size; + * u8 first_var; + * u8 reserved[8]; + * + * The size fields contain the number of 32-bit words. + */ + +u32 bcom_fec_tx_task[] = { + /* header */ + 0x4243544b, + 0x2407070d, + 0x00000000, + 0x00000000, + + /* Task descriptors */ + 0x8018001b, /* LCD: idx0 = var0; idx0 <= var0; idx0 += inc3 */ + 0x60000005, /* DRD2A: EU0=0 EU1=0 EU2=0 EU3=5 EXT init=0 WS=0 RS=0 */ + 0x01ccfc0d, /* DRD2B1: var7 = EU3(); EU3(*idx0,var13) */ + 0x8082a123, /* LCD: idx0 = var1, idx1 = var5; idx1 <= var4; idx0 += inc4, idx1 += inc3 */ + 0x10801418, /* DRD1A: var5 = var3; FN=0 MORE init=4 WS=0 RS=0 */ + 0xf88103a4, /* LCDEXT: idx2 = *idx1, idx3 = var2; idx2 < var14; idx2 += inc4, idx3 += inc4 */ + 0x801a6024, /* LCD: idx4 = var0; ; idx4 += inc4 */ + 0x10001708, /* DRD1A: var5 = idx1; FN=0 MORE init=0 WS=0 RS=0 */ + 0x60140002, /* DRD2A: EU0=0 EU1=0 EU2=0 EU3=2 EXT init=0 WS=2 RS=2 */ + 0x0cccfccf, /* DRD2B1: *idx3 = EU3(); EU3(*idx3,var15) */ + 0x991a002c, /* LCD: idx2 = idx2, idx3 = idx4; idx2 once var0; idx2 += inc5, idx3 += inc4 */ + 0x70000002, /* DRD2A: EU0=0 EU1=0 EU2=0 EU3=2 EXT MORE init=0 WS=0 RS=0 */ + 0x024cfc4d, /* DRD2B1: var9 = EU3(); EU3(*idx1,var13) */ + 0x60000003, /* DRD2A: EU0=0 EU1=0 EU2=0 EU3=3 EXT init=0 WS=0 RS=0 */ + 0x0cccf247, /* DRD2B1: *idx3 = EU3(); EU3(var9,var7) */ + 0x80004000, /* LCDEXT: idx2 = 0x00000000; ; */ + 0xb8c80029, /* LCD: idx3 = *(idx1 + var0000001a); idx3 once var0; idx3 += inc5 */ + 0x70000002, /* DRD2A: EU0=0 EU1=0 EU2=0 EU3=2 EXT MORE init=0 WS=0 RS=0 */ + 0x088cf8d1, /* DRD2B1: idx2 = EU3(); EU3(idx3,var17) */ + 0x00002f10, /* DRD1A: var11 = idx2; FN=0 init=0 WS=0 RS=0 */ + 0x99198432, /* LCD: idx2 = idx2, idx3 = idx3; idx2 > var16; idx2 += inc6, idx3 += inc2 */ + 0x008ac398, /* DRD1A: *idx0 = *idx3; FN=0 init=4 WS=1 RS=1 */ + 0x80004000, /* LCDEXT: idx2 = 0x00000000; ; */ + 0x9999802d, /* LCD: idx3 = idx3; idx3 once var0; idx3 += inc5 */ + 0x70000002, /* DRD2A: EU0=0 EU1=0 EU2=0 EU3=2 EXT MORE init=0 WS=0 RS=0 */ + 0x048cfc53, /* DRD2B1: var18 = EU3(); EU3(*idx1,var19) */ + 0x60000008, /* DRD2A: EU0=0 EU1=0 EU2=0 EU3=8 EXT init=0 WS=0 RS=0 */ + 0x088cf48b, /* DRD2B1: idx2 = EU3(); EU3(var18,var11) */ + 0x99198481, /* LCD: idx2 = idx2, idx3 = idx3; idx2 > var18; idx2 += inc0, idx3 += inc1 */ + 0x009ec398, /* DRD1A: *idx0 = *idx3; FN=0 init=4 WS=3 RS=3 */ + 0x991983b2, /* LCD: idx2 = idx2, idx3 = idx3; idx2 > var14; idx2 += inc6, idx3 += inc2 */ + 0x088ac398, /* DRD1A: *idx0 = *idx3; FN=0 TFD init=4 WS=1 RS=1 */ + 0x9919002d, /* LCD: idx2 = idx2; idx2 once var0; idx2 += inc5 */ + 0x60000005, /* DRD2A: EU0=0 EU1=0 EU2=0 EU3=5 EXT init=0 WS=0 RS=0 */ + 0x0c4cf88e, /* DRD2B1: *idx1 = EU3(); EU3(idx2,var14) */ + 0x000001f8, /* NOP */ + + /* VAR[13]-VAR[19] */ + 0x0c000000, + 0x40000000, + 0x7fff7fff, + 0x00000000, + 0x00000003, + 0x40000004, + 0x43ffffff, + + /* INC[0]-INC[6] */ + 0x40000000, + 0xe0000000, + 0xe0000000, + 0xa0000008, + 0x20000000, + 0x00000000, + 0x4000ffff, +}; + diff --git a/arch/powerpc/sysdev/bestcomm/bcom_gen_bd_rx_task.c b/arch/powerpc/sysdev/bestcomm/bcom_gen_bd_rx_task.c new file mode 100644 index 000000000000..efee022b0256 --- /dev/null +++ b/arch/powerpc/sysdev/bestcomm/bcom_gen_bd_rx_task.c @@ -0,0 +1,63 @@ +/* + * Bestcomm GenBD RX task microcode + * + * Copyright (C) 2006 AppSpec Computer Technologies Corp. + * Jeff Gibbons <jeff.gibbons@appspec.com> + * Copyright (c) 2004 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Based on BestCommAPI-2.2/code_dma/image_rtos1/dma_image.hex + * on Tue Mar 4 10:14:12 2006 GMT + * + */ + +#include <asm/types.h> + +/* + * The header consists of the following fields: + * u32 magic; + * u8 desc_size; + * u8 var_size; + * u8 inc_size; + * u8 first_var; + * u8 reserved[8]; + * + * The size fields contain the number of 32-bit words. + */ + +u32 bcom_gen_bd_rx_task[] = { + /* header */ + 0x4243544b, + 0x0d020409, + 0x00000000, + 0x00000000, + + /* Task descriptors */ + 0x808220da, /* LCD: idx0 = var1, idx1 = var4; idx1 <= var3; idx0 += inc3, idx1 += inc2 */ + 0x13e01010, /* DRD1A: var4 = var2; FN=0 MORE init=31 WS=0 RS=0 */ + 0xb880025b, /* LCD: idx2 = *idx1, idx3 = var0; idx2 < var9; idx2 += inc3, idx3 += inc3 */ + 0x10001308, /* DRD1A: var4 = idx1; FN=0 MORE init=0 WS=0 RS=0 */ + 0x60140002, /* DRD2A: EU0=0 EU1=0 EU2=0 EU3=2 EXT init=0 WS=2 RS=2 */ + 0x0cccfcca, /* DRD2B1: *idx3 = EU3(); EU3(*idx3,var10) */ + 0xd9190240, /* LCDEXT: idx2 = idx2; idx2 > var9; idx2 += inc0 */ + 0xb8c5e009, /* LCD: idx3 = *(idx1 + var00000015); ; idx3 += inc1 */ + 0x07fecf80, /* DRD1A: *idx3 = *idx0; FN=0 INT init=31 WS=3 RS=3 */ + 0x99190024, /* LCD: idx2 = idx2; idx2 once var0; idx2 += inc4 */ + 0x60000005, /* DRD2A: EU0=0 EU1=0 EU2=0 EU3=5 EXT init=0 WS=0 RS=0 */ + 0x0c4cf889, /* DRD2B1: *idx1 = EU3(); EU3(idx2,var9) */ + 0x000001f8, /* NOP */ + + /* VAR[9]-VAR[10] */ + 0x40000000, + 0x7fff7fff, + + /* INC[0]-INC[3] */ + 0x40000000, + 0xe0000000, + 0xa0000008, + 0x20000000, +}; + diff --git a/arch/powerpc/sysdev/bestcomm/bcom_gen_bd_tx_task.c b/arch/powerpc/sysdev/bestcomm/bcom_gen_bd_tx_task.c new file mode 100644 index 000000000000..c605aa42ecbb --- /dev/null +++ b/arch/powerpc/sysdev/bestcomm/bcom_gen_bd_tx_task.c @@ -0,0 +1,69 @@ +/* + * Bestcomm GenBD TX task microcode + * + * Copyright (C) 2006 AppSpec Computer Technologies Corp. + * Jeff Gibbons <jeff.gibbons@appspec.com> + * Copyright (c) 2004 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Based on BestCommAPI-2.2/code_dma/image_rtos1/dma_image.hex + * on Tue Mar 4 10:14:12 2006 GMT + * + */ + +#include <asm/types.h> + +/* + * The header consists of the following fields: + * u32 magic; + * u8 desc_size; + * u8 var_size; + * u8 inc_size; + * u8 first_var; + * u8 reserved[8]; + * + * The size fields contain the number of 32-bit words. + */ + +u32 bcom_gen_bd_tx_task[] = { + /* header */ + 0x4243544b, + 0x0f040609, + 0x00000000, + 0x00000000, + + /* Task descriptors */ + 0x800220e3, /* LCD: idx0 = var0, idx1 = var4; idx1 <= var3; idx0 += inc4, idx1 += inc3 */ + 0x13e01010, /* DRD1A: var4 = var2; FN=0 MORE init=31 WS=0 RS=0 */ + 0xb8808264, /* LCD: idx2 = *idx1, idx3 = var1; idx2 < var9; idx2 += inc4, idx3 += inc4 */ + 0x10001308, /* DRD1A: var4 = idx1; FN=0 MORE init=0 WS=0 RS=0 */ + 0x60140002, /* DRD2A: EU0=0 EU1=0 EU2=0 EU3=2 EXT init=0 WS=2 RS=2 */ + 0x0cccfcca, /* DRD2B1: *idx3 = EU3(); EU3(*idx3,var10) */ + 0xd9190300, /* LCDEXT: idx2 = idx2; idx2 > var12; idx2 += inc0 */ + 0xb8c5e009, /* LCD: idx3 = *(idx1 + var00000015); ; idx3 += inc1 */ + 0x03fec398, /* DRD1A: *idx0 = *idx3; FN=0 init=31 WS=3 RS=3 */ + 0x9919826a, /* LCD: idx2 = idx2, idx3 = idx3; idx2 > var9; idx2 += inc5, idx3 += inc2 */ + 0x0feac398, /* DRD1A: *idx0 = *idx3; FN=0 TFD INT init=31 WS=1 RS=1 */ + 0x99190036, /* LCD: idx2 = idx2; idx2 once var0; idx2 += inc6 */ + 0x60000005, /* DRD2A: EU0=0 EU1=0 EU2=0 EU3=5 EXT init=0 WS=0 RS=0 */ + 0x0c4cf889, /* DRD2B1: *idx1 = EU3(); EU3(idx2,var9) */ + 0x000001f8, /* NOP */ + + /* VAR[9]-VAR[12] */ + 0x40000000, + 0x7fff7fff, + 0x00000000, + 0x40000004, + + /* INC[0]-INC[5] */ + 0x40000000, + 0xe0000000, + 0xe0000000, + 0xa0000008, + 0x20000000, + 0x4000ffff, +}; + diff --git a/arch/powerpc/sysdev/bestcomm/bestcomm.c b/arch/powerpc/sysdev/bestcomm/bestcomm.c new file mode 100644 index 000000000000..48492a83e5a7 --- /dev/null +++ b/arch/powerpc/sysdev/bestcomm/bestcomm.c @@ -0,0 +1,528 @@ +/* + * Driver for MPC52xx processor BestComm peripheral controller + * + * + * Copyright (C) 2006-2007 Sylvain Munaut <tnt@246tNt.com> + * Copyright (C) 2005 Varma Electronics Oy, + * ( by Andrey Volkov <avolkov@varma-el.com> ) + * Copyright (C) 2003-2004 MontaVista, Software, Inc. + * ( by Dale Farnsworth <dfarnsworth@mvista.com> ) + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/of_platform.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/mpc52xx.h> + +#include "sram.h" +#include "bestcomm_priv.h" +#include "bestcomm.h" + +#define DRIVER_NAME "bestcomm-core" + + +struct bcom_engine *bcom_eng = NULL; +EXPORT_SYMBOL_GPL(bcom_eng); /* needed for inline functions */ + + +/* ======================================================================== */ +/* Public and private API */ +/* ======================================================================== */ + +/* Private API */ + +struct bcom_task * +bcom_task_alloc(int bd_count, int bd_size, int priv_size) +{ + int i, tasknum = -1; + struct bcom_task *tsk; + + /* Get and reserve a task num */ + spin_lock(&bcom_eng->lock); + + for (i=0; i<BCOM_MAX_TASKS; i++) + if (!bcom_eng->tdt[i].stop) { /* we use stop as a marker */ + bcom_eng->tdt[i].stop = 0xfffffffful; /* dummy addr */ + tasknum = i; + break; + } + + spin_unlock(&bcom_eng->lock); + + if (tasknum < 0) + return NULL; + + /* Allocate our structure */ + tsk = kzalloc(sizeof(struct bcom_task) + priv_size, GFP_KERNEL); + if (!tsk) + goto error; + + tsk->tasknum = tasknum; + if (priv_size) + tsk->priv = (void*)tsk + sizeof(struct bcom_task); + + /* Get IRQ of that task */ + tsk->irq = irq_of_parse_and_map(bcom_eng->ofnode, tsk->tasknum); + if (tsk->irq == NO_IRQ) + goto error; + + /* Init the BDs, if needed */ + if (bd_count) { + tsk->cookie = kmalloc(sizeof(void*) * bd_count, GFP_KERNEL); + if (!tsk->cookie) + goto error; + + tsk->bd = bcom_sram_alloc(bd_count * bd_size, 4, &tsk->bd_pa); + if (!tsk->bd) + goto error; + memset(tsk->bd, 0x00, bd_count * bd_size); + + tsk->num_bd = bd_count; + tsk->bd_size = bd_size; + } + + return tsk; + +error: + if (tsk) { + if (tsk->irq != NO_IRQ) + irq_dispose_mapping(tsk->irq); + bcom_sram_free(tsk->bd); + kfree(tsk->cookie); + kfree(tsk); + } + + bcom_eng->tdt[tasknum].stop = 0; + + return NULL; +} +EXPORT_SYMBOL_GPL(bcom_task_alloc); + +void +bcom_task_free(struct bcom_task *tsk) +{ + /* Stop the task */ + bcom_disable_task(tsk->tasknum); + + /* Clear TDT */ + bcom_eng->tdt[tsk->tasknum].start = 0; + bcom_eng->tdt[tsk->tasknum].stop = 0; + + /* Free everything */ + irq_dispose_mapping(tsk->irq); + bcom_sram_free(tsk->bd); + kfree(tsk->cookie); + kfree(tsk); +} +EXPORT_SYMBOL_GPL(bcom_task_free); + +int +bcom_load_image(int task, u32 *task_image) +{ + struct bcom_task_header *hdr = (struct bcom_task_header *)task_image; + struct bcom_tdt *tdt; + u32 *desc, *var, *inc; + u32 *desc_src, *var_src, *inc_src; + + /* Safety checks */ + if (hdr->magic != BCOM_TASK_MAGIC) { + printk(KERN_ERR DRIVER_NAME + ": Trying to load invalid microcode\n"); + return -EINVAL; + } + + if ((task < 0) || (task >= BCOM_MAX_TASKS)) { + printk(KERN_ERR DRIVER_NAME + ": Trying to load invalid task %d\n", task); + return -EINVAL; + } + + /* Initial load or reload */ + tdt = &bcom_eng->tdt[task]; + + if (tdt->start) { + desc = bcom_task_desc(task); + if (hdr->desc_size != bcom_task_num_descs(task)) { + printk(KERN_ERR DRIVER_NAME + ": Trying to reload wrong task image " + "(%d size %d/%d)!\n", + task, + hdr->desc_size, + bcom_task_num_descs(task)); + return -EINVAL; + } + } else { + phys_addr_t start_pa; + + desc = bcom_sram_alloc(hdr->desc_size * sizeof(u32), 4, &start_pa); + if (!desc) + return -ENOMEM; + + tdt->start = start_pa; + tdt->stop = start_pa + ((hdr->desc_size-1) * sizeof(u32)); + } + + var = bcom_task_var(task); + inc = bcom_task_inc(task); + + /* Clear & copy */ + memset(var, 0x00, BCOM_VAR_SIZE); + memset(inc, 0x00, BCOM_INC_SIZE); + + desc_src = (u32 *)(hdr + 1); + var_src = desc_src + hdr->desc_size; + inc_src = var_src + hdr->var_size; + + memcpy(desc, desc_src, hdr->desc_size * sizeof(u32)); + memcpy(var + hdr->first_var, var_src, hdr->var_size * sizeof(u32)); + memcpy(inc, inc_src, hdr->inc_size * sizeof(u32)); + + return 0; +} +EXPORT_SYMBOL_GPL(bcom_load_image); + +void +bcom_set_initiator(int task, int initiator) +{ + int i; + int num_descs; + u32 *desc; + int next_drd_has_initiator; + + bcom_set_tcr_initiator(task, initiator); + + /* Just setting tcr is apparently not enough due to some problem */ + /* with it. So we just go thru all the microcode and replace in */ + /* the DRD directly */ + + desc = bcom_task_desc(task); + next_drd_has_initiator = 1; + num_descs = bcom_task_num_descs(task); + + for (i=0; i<num_descs; i++, desc++) { + if (!bcom_desc_is_drd(*desc)) + continue; + if (next_drd_has_initiator) + if (bcom_desc_initiator(*desc) != BCOM_INITIATOR_ALWAYS) + bcom_set_desc_initiator(desc, initiator); + next_drd_has_initiator = !bcom_drd_is_extended(*desc); + } +} +EXPORT_SYMBOL_GPL(bcom_set_initiator); + + +/* Public API */ + +void +bcom_enable(struct bcom_task *tsk) +{ + bcom_enable_task(tsk->tasknum); +} +EXPORT_SYMBOL_GPL(bcom_enable); + +void +bcom_disable(struct bcom_task *tsk) +{ + bcom_disable_task(tsk->tasknum); +} +EXPORT_SYMBOL_GPL(bcom_disable); + + +/* ======================================================================== */ +/* Engine init/cleanup */ +/* ======================================================================== */ + +/* Function Descriptor table */ +/* this will need to be updated if Freescale changes their task code FDT */ +static u32 fdt_ops[] = { + 0xa0045670, /* FDT[48] - load_acc() */ + 0x80045670, /* FDT[49] - unload_acc() */ + 0x21800000, /* FDT[50] - and() */ + 0x21e00000, /* FDT[51] - or() */ + 0x21500000, /* FDT[52] - xor() */ + 0x21400000, /* FDT[53] - andn() */ + 0x21500000, /* FDT[54] - not() */ + 0x20400000, /* FDT[55] - add() */ + 0x20500000, /* FDT[56] - sub() */ + 0x20800000, /* FDT[57] - lsh() */ + 0x20a00000, /* FDT[58] - rsh() */ + 0xc0170000, /* FDT[59] - crc8() */ + 0xc0145670, /* FDT[60] - crc16() */ + 0xc0345670, /* FDT[61] - crc32() */ + 0xa0076540, /* FDT[62] - endian32() */ + 0xa0000760, /* FDT[63] - endian16() */ +}; + + +static int __devinit +bcom_engine_init(void) +{ + int task; + phys_addr_t tdt_pa, ctx_pa, var_pa, fdt_pa; + unsigned int tdt_size, ctx_size, var_size, fdt_size; + + /* Allocate & clear SRAM zones for FDT, TDTs, contexts and vars/incs */ + tdt_size = BCOM_MAX_TASKS * sizeof(struct bcom_tdt); + ctx_size = BCOM_MAX_TASKS * BCOM_CTX_SIZE; + var_size = BCOM_MAX_TASKS * (BCOM_VAR_SIZE + BCOM_INC_SIZE); + fdt_size = BCOM_FDT_SIZE; + + bcom_eng->tdt = bcom_sram_alloc(tdt_size, sizeof(u32), &tdt_pa); + bcom_eng->ctx = bcom_sram_alloc(ctx_size, BCOM_CTX_ALIGN, &ctx_pa); + bcom_eng->var = bcom_sram_alloc(var_size, BCOM_VAR_ALIGN, &var_pa); + bcom_eng->fdt = bcom_sram_alloc(fdt_size, BCOM_FDT_ALIGN, &fdt_pa); + + if (!bcom_eng->tdt || !bcom_eng->ctx || !bcom_eng->var || !bcom_eng->fdt) { + printk(KERN_ERR "DMA: SRAM alloc failed in engine init !\n"); + + bcom_sram_free(bcom_eng->tdt); + bcom_sram_free(bcom_eng->ctx); + bcom_sram_free(bcom_eng->var); + bcom_sram_free(bcom_eng->fdt); + + return -ENOMEM; + } + + memset(bcom_eng->tdt, 0x00, tdt_size); + memset(bcom_eng->ctx, 0x00, ctx_size); + memset(bcom_eng->var, 0x00, var_size); + memset(bcom_eng->fdt, 0x00, fdt_size); + + /* Copy the FDT for the EU#3 */ + memcpy(&bcom_eng->fdt[48], fdt_ops, sizeof(fdt_ops)); + + /* Initialize Task base structure */ + for (task=0; task<BCOM_MAX_TASKS; task++) + { + out_be16(&bcom_eng->regs->tcr[task], 0); + out_8(&bcom_eng->regs->ipr[task], 0); + + bcom_eng->tdt[task].context = ctx_pa; + bcom_eng->tdt[task].var = var_pa; + bcom_eng->tdt[task].fdt = fdt_pa; + + var_pa += BCOM_VAR_SIZE + BCOM_INC_SIZE; + ctx_pa += BCOM_CTX_SIZE; + } + + out_be32(&bcom_eng->regs->taskBar, tdt_pa); + + /* Init 'always' initiator */ + out_8(&bcom_eng->regs->ipr[BCOM_INITIATOR_ALWAYS], BCOM_IPR_ALWAYS); + + /* Disable COMM Bus Prefetch, apparently it's not reliable yet */ + /* FIXME: This should be done on 5200 and not 5200B ... */ + out_be16(&bcom_eng->regs->PtdCntrl, in_be16(&bcom_eng->regs->PtdCntrl) | 1); + + /* Init lock */ + spin_lock_init(&bcom_eng->lock); + + return 0; +} + +static void +bcom_engine_cleanup(void) +{ + int task; + + /* Stop all tasks */ + for (task=0; task<BCOM_MAX_TASKS; task++) + { + out_be16(&bcom_eng->regs->tcr[task], 0); + out_8(&bcom_eng->regs->ipr[task], 0); + } + + out_be32(&bcom_eng->regs->taskBar, 0ul); + + /* Release the SRAM zones */ + bcom_sram_free(bcom_eng->tdt); + bcom_sram_free(bcom_eng->ctx); + bcom_sram_free(bcom_eng->var); + bcom_sram_free(bcom_eng->fdt); +} + + +/* ======================================================================== */ +/* OF platform driver */ +/* ======================================================================== */ + +static int __devinit +mpc52xx_bcom_probe(struct of_device *op, const struct of_device_id *match) +{ + struct device_node *ofn_sram; + struct resource res_bcom; + + int rv; + + /* Inform user we're ok so far */ + printk(KERN_INFO "DMA: MPC52xx BestComm driver\n"); + + /* Get the bestcomm node */ + of_node_get(op->node); + + /* Prepare SRAM */ + ofn_sram = of_find_compatible_node(NULL, "sram", "mpc5200-sram"); + if (!ofn_sram) { + printk(KERN_ERR DRIVER_NAME ": " + "No SRAM found in device tree\n"); + rv = -ENODEV; + goto error_ofput; + } + rv = bcom_sram_init(ofn_sram, DRIVER_NAME); + of_node_put(ofn_sram); + + if (rv) { + printk(KERN_ERR DRIVER_NAME ": " + "Error in SRAM init\n"); + goto error_ofput; + } + + /* Get a clean struct */ + bcom_eng = kzalloc(sizeof(struct bcom_engine), GFP_KERNEL); + if (!bcom_eng) { + printk(KERN_ERR DRIVER_NAME ": " + "Can't allocate state structure\n"); + rv = -ENOMEM; + goto error_sramclean; + } + + /* Save the node */ + bcom_eng->ofnode = op->node; + + /* Get, reserve & map io */ + if (of_address_to_resource(op->node, 0, &res_bcom)) { + printk(KERN_ERR DRIVER_NAME ": " + "Can't get resource\n"); + rv = -EINVAL; + goto error_sramclean; + } + + if (!request_mem_region(res_bcom.start, sizeof(struct mpc52xx_sdma), + DRIVER_NAME)) { + printk(KERN_ERR DRIVER_NAME ": " + "Can't request registers region\n"); + rv = -EBUSY; + goto error_sramclean; + } + + bcom_eng->regs_base = res_bcom.start; + bcom_eng->regs = ioremap(res_bcom.start, sizeof(struct mpc52xx_sdma)); + if (!bcom_eng->regs) { + printk(KERN_ERR DRIVER_NAME ": " + "Can't map registers\n"); + rv = -ENOMEM; + goto error_release; + } + + /* Now, do the real init */ + rv = bcom_engine_init(); + if (rv) + goto error_unmap; + + /* Done ! */ + printk(KERN_INFO "DMA: MPC52xx BestComm engine @%08lx ok !\n", + bcom_eng->regs_base); + + return 0; + + /* Error path */ +error_unmap: + iounmap(bcom_eng->regs); +error_release: + release_mem_region(res_bcom.start, sizeof(struct mpc52xx_sdma)); +error_sramclean: + kfree(bcom_eng); + bcom_sram_cleanup(); +error_ofput: + of_node_put(op->node); + + printk(KERN_ERR "DMA: MPC52xx BestComm init failed !\n"); + + return rv; +} + + +static int +mpc52xx_bcom_remove(struct of_device *op) +{ + /* Clean up the engine */ + bcom_engine_cleanup(); + + /* Cleanup SRAM */ + bcom_sram_cleanup(); + + /* Release regs */ + iounmap(bcom_eng->regs); + release_mem_region(bcom_eng->regs_base, sizeof(struct mpc52xx_sdma)); + + /* Release the node */ + of_node_put(bcom_eng->ofnode); + + /* Release memory */ + kfree(bcom_eng); + bcom_eng = NULL; + + return 0; +} + +static struct of_device_id mpc52xx_bcom_of_match[] = { + { + .type = "dma-controller", + .compatible = "mpc5200-bestcomm", + }, + {}, +}; + +MODULE_DEVICE_TABLE(of, mpc52xx_bcom_of_match); + + +static struct of_platform_driver mpc52xx_bcom_of_platform_driver = { + .owner = THIS_MODULE, + .name = DRIVER_NAME, + .match_table = mpc52xx_bcom_of_match, + .probe = mpc52xx_bcom_probe, + .remove = mpc52xx_bcom_remove, + .driver = { + .name = DRIVER_NAME, + .owner = THIS_MODULE, + }, +}; + + +/* ======================================================================== */ +/* Module */ +/* ======================================================================== */ + +static int __init +mpc52xx_bcom_init(void) +{ + return of_register_platform_driver(&mpc52xx_bcom_of_platform_driver); +} + +static void __exit +mpc52xx_bcom_exit(void) +{ + of_unregister_platform_driver(&mpc52xx_bcom_of_platform_driver); +} + +/* If we're not a module, we must make sure everything is setup before */ +/* anyone tries to use us ... that's why we use subsys_initcall instead */ +/* of module_init. */ +subsys_initcall(mpc52xx_bcom_init); +module_exit(mpc52xx_bcom_exit); + +MODULE_DESCRIPTION("Freescale MPC52xx BestComm DMA"); +MODULE_AUTHOR("Sylvain Munaut <tnt@246tNt.com>"); +MODULE_AUTHOR("Andrey Volkov <avolkov@varma-el.com>"); +MODULE_AUTHOR("Dale Farnsworth <dfarnsworth@mvista.com>"); +MODULE_LICENSE("GPL v2"); + diff --git a/arch/powerpc/sysdev/bestcomm/bestcomm.h b/arch/powerpc/sysdev/bestcomm/bestcomm.h new file mode 100644 index 000000000000..e802cb4eb69a --- /dev/null +++ b/arch/powerpc/sysdev/bestcomm/bestcomm.h @@ -0,0 +1,190 @@ +/* + * Public header for the MPC52xx processor BestComm driver + * + * + * Copyright (C) 2006 Sylvain Munaut <tnt@246tNt.com> + * Copyright (C) 2005 Varma Electronics Oy, + * ( by Andrey Volkov <avolkov@varma-el.com> ) + * Copyright (C) 2003-2004 MontaVista, Software, Inc. + * ( by Dale Farnsworth <dfarnsworth@mvista.com> ) + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#ifndef __BESTCOMM_H__ +#define __BESTCOMM_H__ + +struct bcom_bd; /* defined later on ... */ + + +/* ======================================================================== */ +/* Generic task managment */ +/* ======================================================================== */ + +/** + * struct bcom_task - Structure describing a loaded BestComm task + * + * This structure is never built by the driver it self. It's built and + * filled the intermediate layer of the BestComm API, the task dependent + * support code. + * + * Most likely you don't need to poke around inside this structure. The + * fields are exposed in the header just for the sake of inline functions + */ +struct bcom_task { + unsigned int tasknum; + unsigned int flags; + int irq; + + struct bcom_bd *bd; + phys_addr_t bd_pa; + void **cookie; + unsigned short index; + unsigned short outdex; + unsigned int num_bd; + unsigned int bd_size; + + void* priv; +}; + +#define BCOM_FLAGS_NONE 0x00000000ul +#define BCOM_FLAGS_ENABLE_TASK (1ul << 0) + +/** + * bcom_enable - Enable a BestComm task + * @tsk: The BestComm task structure + * + * This function makes sure the given task is enabled and can be run + * by the BestComm engine as needed + */ +extern void bcom_enable(struct bcom_task *tsk); + +/** + * bcom_disable - Disable a BestComm task + * @tsk: The BestComm task structure + * + * This function disable a given task, making sure it's not executed + * by the BestComm engine. + */ +extern void bcom_disable(struct bcom_task *tsk); + + +/** + * bcom_get_task_irq - Returns the irq number of a BestComm task + * @tsk: The BestComm task structure + */ +static inline int +bcom_get_task_irq(struct bcom_task *tsk) { + return tsk->irq; +} + +/* ======================================================================== */ +/* BD based tasks helpers */ +/* ======================================================================== */ + +/** + * struct bcom_bd - Structure describing a generic BestComm buffer descriptor + * @status: The current status of this buffer. Exact meaning depends on the + * task type + * @data: An array of u32 whose meaning depends on the task type. + */ +struct bcom_bd { + u32 status; + u32 data[1]; /* variable, but at least 1 */ +}; + +#define BCOM_BD_READY 0x40000000ul + +/** _bcom_next_index - Get next input index. + * @tsk: pointer to task structure + * + * Support function; Device drivers should not call this + */ +static inline int +_bcom_next_index(struct bcom_task *tsk) +{ + return ((tsk->index + 1) == tsk->num_bd) ? 0 : tsk->index + 1; +} + +/** _bcom_next_outdex - Get next output index. + * @tsk: pointer to task structure + * + * Support function; Device drivers should not call this + */ +static inline int +_bcom_next_outdex(struct bcom_task *tsk) +{ + return ((tsk->outdex + 1) == tsk->num_bd) ? 0 : tsk->outdex + 1; +} + +/** + * bcom_queue_empty - Checks if a BestComm task BD queue is empty + * @tsk: The BestComm task structure + */ +static inline int +bcom_queue_empty(struct bcom_task *tsk) +{ + return tsk->index == tsk->outdex; +} + +/** + * bcom_queue_full - Checks if a BestComm task BD queue is full + * @tsk: The BestComm task structure + */ +static inline int +bcom_queue_full(struct bcom_task *tsk) +{ + return tsk->outdex == _bcom_next_index(tsk); +} + +/** + * bcom_buffer_done - Checks if a BestComm + * @tsk: The BestComm task structure + */ +static inline int +bcom_buffer_done(struct bcom_task *tsk) +{ + if (bcom_queue_empty(tsk)) + return 0; + return !(tsk->bd[tsk->outdex].status & BCOM_BD_READY); +} + +/** + * bcom_prepare_next_buffer - clear status of next available buffer. + * @tsk: The BestComm task structure + * + * Returns pointer to next buffer descriptor + */ +static inline struct bcom_bd * +bcom_prepare_next_buffer(struct bcom_task *tsk) +{ + tsk->bd[tsk->index].status = 0; /* cleanup last status */ + return &tsk->bd[tsk->index]; +} + +static inline void +bcom_submit_next_buffer(struct bcom_task *tsk, void *cookie) +{ + tsk->cookie[tsk->index] = cookie; + mb(); /* ensure the bd is really up-to-date */ + tsk->bd[tsk->index].status |= BCOM_BD_READY; + tsk->index = _bcom_next_index(tsk); + if (tsk->flags & BCOM_FLAGS_ENABLE_TASK) + bcom_enable(tsk); +} + +static inline void * +bcom_retrieve_buffer(struct bcom_task *tsk, u32 *p_status, struct bcom_bd **p_bd) +{ + void *cookie = tsk->cookie[tsk->outdex]; + if (p_status) + *p_status = tsk->bd[tsk->outdex].status; + if (p_bd) + *p_bd = &tsk->bd[tsk->outdex]; + tsk->outdex = _bcom_next_outdex(tsk); + return cookie; +} + +#endif /* __BESTCOMM_H__ */ diff --git a/arch/powerpc/sysdev/bestcomm/bestcomm_priv.h b/arch/powerpc/sysdev/bestcomm/bestcomm_priv.h new file mode 100644 index 000000000000..866a2915ef2f --- /dev/null +++ b/arch/powerpc/sysdev/bestcomm/bestcomm_priv.h @@ -0,0 +1,334 @@ +/* + * Private header for the MPC52xx processor BestComm driver + * + * By private, we mean that driver should not use it directly. It's meant + * to be used by the BestComm engine driver itself and by the intermediate + * layer between the core and the drivers. + * + * Copyright (C) 2006 Sylvain Munaut <tnt@246tNt.com> + * Copyright (C) 2005 Varma Electronics Oy, + * ( by Andrey Volkov <avolkov@varma-el.com> ) + * Copyright (C) 2003-2004 MontaVista, Software, Inc. + * ( by Dale Farnsworth <dfarnsworth@mvista.com> ) + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#ifndef __BESTCOMM_PRIV_H__ +#define __BESTCOMM_PRIV_H__ + +#include <linux/spinlock.h> +#include <linux/of.h> +#include <asm/io.h> +#include <asm/mpc52xx.h> + +#include "sram.h" + + +/* ======================================================================== */ +/* Engine related stuff */ +/* ======================================================================== */ + +/* Zones sizes and needed alignments */ +#define BCOM_MAX_TASKS 16 +#define BCOM_MAX_VAR 24 +#define BCOM_MAX_INC 8 +#define BCOM_MAX_FDT 64 +#define BCOM_MAX_CTX 20 +#define BCOM_CTX_SIZE (BCOM_MAX_CTX * sizeof(u32)) +#define BCOM_CTX_ALIGN 0x100 +#define BCOM_VAR_SIZE (BCOM_MAX_VAR * sizeof(u32)) +#define BCOM_INC_SIZE (BCOM_MAX_INC * sizeof(u32)) +#define BCOM_VAR_ALIGN 0x80 +#define BCOM_FDT_SIZE (BCOM_MAX_FDT * sizeof(u32)) +#define BCOM_FDT_ALIGN 0x100 + +/** + * struct bcom_tdt - Task Descriptor Table Entry + * + */ +struct bcom_tdt { + u32 start; + u32 stop; + u32 var; + u32 fdt; + u32 exec_status; /* used internally by BestComm engine */ + u32 mvtp; /* used internally by BestComm engine */ + u32 context; + u32 litbase; +}; + +/** + * struct bcom_engine + * + * This holds all info needed globaly to handle the engine + */ +struct bcom_engine { + struct device_node *ofnode; + struct mpc52xx_sdma __iomem *regs; + phys_addr_t regs_base; + + struct bcom_tdt *tdt; + u32 *ctx; + u32 *var; + u32 *fdt; + + spinlock_t lock; +}; + +extern struct bcom_engine *bcom_eng; + + +/* ======================================================================== */ +/* Tasks related stuff */ +/* ======================================================================== */ + +/* Tasks image header */ +#define BCOM_TASK_MAGIC 0x4243544B /* 'BCTK' */ + +struct bcom_task_header { + u32 magic; + u8 desc_size; /* the size fields */ + u8 var_size; /* are given in number */ + u8 inc_size; /* of 32-bits words */ + u8 first_var; + u8 reserved[8]; +}; + +/* Descriptors stucture & co */ +#define BCOM_DESC_NOP 0x000001f8 +#define BCOM_LCD_MASK 0x80000000 +#define BCOM_DRD_EXTENDED 0x40000000 +#define BCOM_DRD_INITIATOR_SHIFT 21 + +/* Tasks pragma */ +#define BCOM_PRAGMA_BIT_RSV 7 /* reserved pragma bit */ +#define BCOM_PRAGMA_BIT_PRECISE_INC 6 /* increment 0=when possible, */ + /* 1=iter end */ +#define BCOM_PRAGMA_BIT_RST_ERROR_NO 5 /* don't reset errors on */ + /* task enable */ +#define BCOM_PRAGMA_BIT_PACK 4 /* pack data enable */ +#define BCOM_PRAGMA_BIT_INTEGER 3 /* data alignment */ + /* 0=frac(msb), 1=int(lsb) */ +#define BCOM_PRAGMA_BIT_SPECREAD 2 /* XLB speculative read */ +#define BCOM_PRAGMA_BIT_CW 1 /* write line buffer enable */ +#define BCOM_PRAGMA_BIT_RL 0 /* read line buffer enable */ + + /* Looks like XLB speculative read generates XLB errors when a buffer + * is at the end of the physical memory. i.e. when accessing the + * lasts words, the engine tries to prefetch the next but there is no + * next ... + */ +#define BCOM_STD_PRAGMA ((0 << BCOM_PRAGMA_BIT_RSV) | \ + (0 << BCOM_PRAGMA_BIT_PRECISE_INC) | \ + (0 << BCOM_PRAGMA_BIT_RST_ERROR_NO) | \ + (0 << BCOM_PRAGMA_BIT_PACK) | \ + (0 << BCOM_PRAGMA_BIT_INTEGER) | \ + (0 << BCOM_PRAGMA_BIT_SPECREAD) | \ + (1 << BCOM_PRAGMA_BIT_CW) | \ + (1 << BCOM_PRAGMA_BIT_RL)) + +#define BCOM_PCI_PRAGMA ((0 << BCOM_PRAGMA_BIT_RSV) | \ + (0 << BCOM_PRAGMA_BIT_PRECISE_INC) | \ + (0 << BCOM_PRAGMA_BIT_RST_ERROR_NO) | \ + (0 << BCOM_PRAGMA_BIT_PACK) | \ + (1 << BCOM_PRAGMA_BIT_INTEGER) | \ + (0 << BCOM_PRAGMA_BIT_SPECREAD) | \ + (1 << BCOM_PRAGMA_BIT_CW) | \ + (1 << BCOM_PRAGMA_BIT_RL)) + +#define BCOM_ATA_PRAGMA BCOM_STD_PRAGMA +#define BCOM_CRC16_DP_0_PRAGMA BCOM_STD_PRAGMA +#define BCOM_CRC16_DP_1_PRAGMA BCOM_STD_PRAGMA +#define BCOM_FEC_RX_BD_PRAGMA BCOM_STD_PRAGMA +#define BCOM_FEC_TX_BD_PRAGMA BCOM_STD_PRAGMA +#define BCOM_GEN_DP_0_PRAGMA BCOM_STD_PRAGMA +#define BCOM_GEN_DP_1_PRAGMA BCOM_STD_PRAGMA +#define BCOM_GEN_DP_2_PRAGMA BCOM_STD_PRAGMA +#define BCOM_GEN_DP_3_PRAGMA BCOM_STD_PRAGMA +#define BCOM_GEN_DP_BD_0_PRAGMA BCOM_STD_PRAGMA +#define BCOM_GEN_DP_BD_1_PRAGMA BCOM_STD_PRAGMA +#define BCOM_GEN_RX_BD_PRAGMA BCOM_STD_PRAGMA +#define BCOM_GEN_TX_BD_PRAGMA BCOM_STD_PRAGMA +#define BCOM_GEN_LPC_PRAGMA BCOM_STD_PRAGMA +#define BCOM_PCI_RX_PRAGMA BCOM_PCI_PRAGMA +#define BCOM_PCI_TX_PRAGMA BCOM_PCI_PRAGMA + +/* Initiators number */ +#define BCOM_INITIATOR_ALWAYS 0 +#define BCOM_INITIATOR_SCTMR_0 1 +#define BCOM_INITIATOR_SCTMR_1 2 +#define BCOM_INITIATOR_FEC_RX 3 +#define BCOM_INITIATOR_FEC_TX 4 +#define BCOM_INITIATOR_ATA_RX 5 +#define BCOM_INITIATOR_ATA_TX 6 +#define BCOM_INITIATOR_SCPCI_RX 7 +#define BCOM_INITIATOR_SCPCI_TX 8 +#define BCOM_INITIATOR_PSC3_RX 9 +#define BCOM_INITIATOR_PSC3_TX 10 +#define BCOM_INITIATOR_PSC2_RX 11 +#define BCOM_INITIATOR_PSC2_TX 12 +#define BCOM_INITIATOR_PSC1_RX 13 +#define BCOM_INITIATOR_PSC1_TX 14 +#define BCOM_INITIATOR_SCTMR_2 15 +#define BCOM_INITIATOR_SCLPC 16 +#define BCOM_INITIATOR_PSC5_RX 17 +#define BCOM_INITIATOR_PSC5_TX 18 +#define BCOM_INITIATOR_PSC4_RX 19 +#define BCOM_INITIATOR_PSC4_TX 20 +#define BCOM_INITIATOR_I2C2_RX 21 +#define BCOM_INITIATOR_I2C2_TX 22 +#define BCOM_INITIATOR_I2C1_RX 23 +#define BCOM_INITIATOR_I2C1_TX 24 +#define BCOM_INITIATOR_PSC6_RX 25 +#define BCOM_INITIATOR_PSC6_TX 26 +#define BCOM_INITIATOR_IRDA_RX 25 +#define BCOM_INITIATOR_IRDA_TX 26 +#define BCOM_INITIATOR_SCTMR_3 27 +#define BCOM_INITIATOR_SCTMR_4 28 +#define BCOM_INITIATOR_SCTMR_5 29 +#define BCOM_INITIATOR_SCTMR_6 30 +#define BCOM_INITIATOR_SCTMR_7 31 + +/* Initiators priorities */ +#define BCOM_IPR_ALWAYS 7 +#define BCOM_IPR_SCTMR_0 2 +#define BCOM_IPR_SCTMR_1 2 +#define BCOM_IPR_FEC_RX 6 +#define BCOM_IPR_FEC_TX 5 +#define BCOM_IPR_ATA_RX 4 +#define BCOM_IPR_ATA_TX 3 +#define BCOM_IPR_SCPCI_RX 2 +#define BCOM_IPR_SCPCI_TX 2 +#define BCOM_IPR_PSC3_RX 2 +#define BCOM_IPR_PSC3_TX 2 +#define BCOM_IPR_PSC2_RX 2 +#define BCOM_IPR_PSC2_TX 2 +#define BCOM_IPR_PSC1_RX 2 +#define BCOM_IPR_PSC1_TX 2 +#define BCOM_IPR_SCTMR_2 2 +#define BCOM_IPR_SCLPC 2 +#define BCOM_IPR_PSC5_RX 2 +#define BCOM_IPR_PSC5_TX 2 +#define BCOM_IPR_PSC4_RX 2 +#define BCOM_IPR_PSC4_TX 2 +#define BCOM_IPR_I2C2_RX 2 +#define BCOM_IPR_I2C2_TX 2 +#define BCOM_IPR_I2C1_RX 2 +#define BCOM_IPR_I2C1_TX 2 +#define BCOM_IPR_PSC6_RX 2 +#define BCOM_IPR_PSC6_TX 2 +#define BCOM_IPR_IRDA_RX 2 +#define BCOM_IPR_IRDA_TX 2 +#define BCOM_IPR_SCTMR_3 2 +#define BCOM_IPR_SCTMR_4 2 +#define BCOM_IPR_SCTMR_5 2 +#define BCOM_IPR_SCTMR_6 2 +#define BCOM_IPR_SCTMR_7 2 + + +/* ======================================================================== */ +/* API */ +/* ======================================================================== */ + +extern struct bcom_task *bcom_task_alloc(int bd_count, int bd_size, int priv_size); +extern void bcom_task_free(struct bcom_task *tsk); +extern int bcom_load_image(int task, u32 *task_image); +extern void bcom_set_initiator(int task, int initiator); + + +#define TASK_ENABLE 0x8000 + +static inline void +bcom_enable_task(int task) +{ + u16 reg; + reg = in_be16(&bcom_eng->regs->tcr[task]); + out_be16(&bcom_eng->regs->tcr[task], reg | TASK_ENABLE); +} + +static inline void +bcom_disable_task(int task) +{ + u16 reg = in_be16(&bcom_eng->regs->tcr[task]); + out_be16(&bcom_eng->regs->tcr[task], reg & ~TASK_ENABLE); +} + + +static inline u32 * +bcom_task_desc(int task) +{ + return bcom_sram_pa2va(bcom_eng->tdt[task].start); +} + +static inline int +bcom_task_num_descs(int task) +{ + return (bcom_eng->tdt[task].stop - bcom_eng->tdt[task].start)/sizeof(u32) + 1; +} + +static inline u32 * +bcom_task_var(int task) +{ + return bcom_sram_pa2va(bcom_eng->tdt[task].var); +} + +static inline u32 * +bcom_task_inc(int task) +{ + return &bcom_task_var(task)[BCOM_MAX_VAR]; +} + + +static inline int +bcom_drd_is_extended(u32 desc) +{ + return (desc) & BCOM_DRD_EXTENDED; +} + +static inline int +bcom_desc_is_drd(u32 desc) +{ + return !(desc & BCOM_LCD_MASK) && desc != BCOM_DESC_NOP; +} + +static inline int +bcom_desc_initiator(u32 desc) +{ + return (desc >> BCOM_DRD_INITIATOR_SHIFT) & 0x1f; +} + +static inline void +bcom_set_desc_initiator(u32 *desc, int initiator) +{ + *desc = (*desc & ~(0x1f << BCOM_DRD_INITIATOR_SHIFT)) | + ((initiator & 0x1f) << BCOM_DRD_INITIATOR_SHIFT); +} + + +static inline void +bcom_set_task_pragma(int task, int pragma) +{ + u32 *fdt = &bcom_eng->tdt[task].fdt; + *fdt = (*fdt & ~0xff) | pragma; +} + +static inline void +bcom_set_task_auto_start(int task, int next_task) +{ + u16 __iomem *tcr = &bcom_eng->regs->tcr[task]; + out_be16(tcr, (in_be16(tcr) & ~0xff) | 0x00c0 | next_task); +} + +static inline void +bcom_set_tcr_initiator(int task, int initiator) +{ + u16 __iomem *tcr = &bcom_eng->regs->tcr[task]; + out_be16(tcr, (in_be16(tcr) & ~0x1f00) | ((initiator & 0x1f) << 8)); +} + + +#endif /* __BESTCOMM_PRIV_H__ */ + diff --git a/arch/powerpc/sysdev/bestcomm/fec.c b/arch/powerpc/sysdev/bestcomm/fec.c new file mode 100644 index 000000000000..957a988d23ea --- /dev/null +++ b/arch/powerpc/sysdev/bestcomm/fec.c @@ -0,0 +1,270 @@ +/* + * Bestcomm FEC tasks driver + * + * + * Copyright (C) 2006-2007 Sylvain Munaut <tnt@246tNt.com> + * Copyright (C) 2003-2004 MontaVista, Software, Inc. + * ( by Dale Farnsworth <dfarnsworth@mvista.com> ) + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/types.h> +#include <asm/io.h> + +#include "bestcomm.h" +#include "bestcomm_priv.h" +#include "fec.h" + + +/* ======================================================================== */ +/* Task image/var/inc */ +/* ======================================================================== */ + +/* fec tasks images */ +extern u32 bcom_fec_rx_task[]; +extern u32 bcom_fec_tx_task[]; + +/* rx task vars that need to be set before enabling the task */ +struct bcom_fec_rx_var { + u32 enable; /* (u16*) address of task's control register */ + u32 fifo; /* (u32*) address of fec's fifo */ + u32 bd_base; /* (struct bcom_bd*) beginning of ring buffer */ + u32 bd_last; /* (struct bcom_bd*) end of ring buffer */ + u32 bd_start; /* (struct bcom_bd*) current bd */ + u32 buffer_size; /* size of receive buffer */ +}; + +/* rx task incs that need to be set before enabling the task */ +struct bcom_fec_rx_inc { + u16 pad0; + s16 incr_bytes; + u16 pad1; + s16 incr_dst; + u16 pad2; + s16 incr_dst_ma; +}; + +/* tx task vars that need to be set before enabling the task */ +struct bcom_fec_tx_var { + u32 DRD; /* (u32*) address of self-modified DRD */ + u32 fifo; /* (u32*) address of fec's fifo */ + u32 enable; /* (u16*) address of task's control register */ + u32 bd_base; /* (struct bcom_bd*) beginning of ring buffer */ + u32 bd_last; /* (struct bcom_bd*) end of ring buffer */ + u32 bd_start; /* (struct bcom_bd*) current bd */ + u32 buffer_size; /* set by uCode for each packet */ +}; + +/* tx task incs that need to be set before enabling the task */ +struct bcom_fec_tx_inc { + u16 pad0; + s16 incr_bytes; + u16 pad1; + s16 incr_src; + u16 pad2; + s16 incr_src_ma; +}; + +/* private structure in the task */ +struct bcom_fec_priv { + phys_addr_t fifo; + int maxbufsize; +}; + + +/* ======================================================================== */ +/* Task support code */ +/* ======================================================================== */ + +struct bcom_task * +bcom_fec_rx_init(int queue_len, phys_addr_t fifo, int maxbufsize) +{ + struct bcom_task *tsk; + struct bcom_fec_priv *priv; + + tsk = bcom_task_alloc(queue_len, sizeof(struct bcom_fec_bd), + sizeof(struct bcom_fec_priv)); + if (!tsk) + return NULL; + + tsk->flags = BCOM_FLAGS_NONE; + + priv = tsk->priv; + priv->fifo = fifo; + priv->maxbufsize = maxbufsize; + + if (bcom_fec_rx_reset(tsk)) { + bcom_task_free(tsk); + return NULL; + } + + return tsk; +} +EXPORT_SYMBOL_GPL(bcom_fec_rx_init); + +int +bcom_fec_rx_reset(struct bcom_task *tsk) +{ + struct bcom_fec_priv *priv = tsk->priv; + struct bcom_fec_rx_var *var; + struct bcom_fec_rx_inc *inc; + + /* Shutdown the task */ + bcom_disable_task(tsk->tasknum); + + /* Reset the microcode */ + var = (struct bcom_fec_rx_var *) bcom_task_var(tsk->tasknum); + inc = (struct bcom_fec_rx_inc *) bcom_task_inc(tsk->tasknum); + + if (bcom_load_image(tsk->tasknum, bcom_fec_rx_task)) + return -1; + + var->enable = bcom_eng->regs_base + + offsetof(struct mpc52xx_sdma, tcr[tsk->tasknum]); + var->fifo = (u32) priv->fifo; + var->bd_base = tsk->bd_pa; + var->bd_last = tsk->bd_pa + ((tsk->num_bd-1) * tsk->bd_size); + var->bd_start = tsk->bd_pa; + var->buffer_size = priv->maxbufsize; + + inc->incr_bytes = -(s16)sizeof(u32); /* These should be in the */ + inc->incr_dst = sizeof(u32); /* task image, but we stick */ + inc->incr_dst_ma= sizeof(u8); /* to the official ones */ + + /* Reset the BDs */ + tsk->index = 0; + tsk->outdex = 0; + + memset(tsk->bd, 0x00, tsk->num_bd * tsk->bd_size); + + /* Configure some stuff */ + bcom_set_task_pragma(tsk->tasknum, BCOM_FEC_RX_BD_PRAGMA); + bcom_set_task_auto_start(tsk->tasknum, tsk->tasknum); + + out_8(&bcom_eng->regs->ipr[BCOM_INITIATOR_FEC_RX], BCOM_IPR_FEC_RX); + + out_be32(&bcom_eng->regs->IntPend, 1<<tsk->tasknum); /* Clear ints */ + + return 0; +} +EXPORT_SYMBOL_GPL(bcom_fec_rx_reset); + +void +bcom_fec_rx_release(struct bcom_task *tsk) +{ + /* Nothing special for the FEC tasks */ + bcom_task_free(tsk); +} +EXPORT_SYMBOL_GPL(bcom_fec_rx_release); + + + + /* Return 2nd to last DRD */ + /* This is an ugly hack, but at least it's only done + once at initialization */ +static u32 *self_modified_drd(int tasknum) +{ + u32 *desc; + int num_descs; + int drd_count; + int i; + + num_descs = bcom_task_num_descs(tasknum); + desc = bcom_task_desc(tasknum) + num_descs - 1; + drd_count = 0; + for (i=0; i<num_descs; i++, desc--) + if (bcom_desc_is_drd(*desc) && ++drd_count == 3) + break; + return desc; +} + +struct bcom_task * +bcom_fec_tx_init(int queue_len, phys_addr_t fifo) +{ + struct bcom_task *tsk; + struct bcom_fec_priv *priv; + + tsk = bcom_task_alloc(queue_len, sizeof(struct bcom_fec_bd), + sizeof(struct bcom_fec_priv)); + if (!tsk) + return NULL; + + tsk->flags = BCOM_FLAGS_ENABLE_TASK; + + priv = tsk->priv; + priv->fifo = fifo; + + if (bcom_fec_tx_reset(tsk)) { + bcom_task_free(tsk); + return NULL; + } + + return tsk; +} +EXPORT_SYMBOL_GPL(bcom_fec_tx_init); + +int +bcom_fec_tx_reset(struct bcom_task *tsk) +{ + struct bcom_fec_priv *priv = tsk->priv; + struct bcom_fec_tx_var *var; + struct bcom_fec_tx_inc *inc; + + /* Shutdown the task */ + bcom_disable_task(tsk->tasknum); + + /* Reset the microcode */ + var = (struct bcom_fec_tx_var *) bcom_task_var(tsk->tasknum); + inc = (struct bcom_fec_tx_inc *) bcom_task_inc(tsk->tasknum); + + if (bcom_load_image(tsk->tasknum, bcom_fec_tx_task)) + return -1; + + var->enable = bcom_eng->regs_base + + offsetof(struct mpc52xx_sdma, tcr[tsk->tasknum]); + var->fifo = (u32) priv->fifo; + var->DRD = bcom_sram_va2pa(self_modified_drd(tsk->tasknum)); + var->bd_base = tsk->bd_pa; + var->bd_last = tsk->bd_pa + ((tsk->num_bd-1) * tsk->bd_size); + var->bd_start = tsk->bd_pa; + + inc->incr_bytes = -(s16)sizeof(u32); /* These should be in the */ + inc->incr_src = sizeof(u32); /* task image, but we stick */ + inc->incr_src_ma= sizeof(u8); /* to the official ones */ + + /* Reset the BDs */ + tsk->index = 0; + tsk->outdex = 0; + + memset(tsk->bd, 0x00, tsk->num_bd * tsk->bd_size); + + /* Configure some stuff */ + bcom_set_task_pragma(tsk->tasknum, BCOM_FEC_TX_BD_PRAGMA); + bcom_set_task_auto_start(tsk->tasknum, tsk->tasknum); + + out_8(&bcom_eng->regs->ipr[BCOM_INITIATOR_FEC_TX], BCOM_IPR_FEC_TX); + + out_be32(&bcom_eng->regs->IntPend, 1<<tsk->tasknum); /* Clear ints */ + + return 0; +} +EXPORT_SYMBOL_GPL(bcom_fec_tx_reset); + +void +bcom_fec_tx_release(struct bcom_task *tsk) +{ + /* Nothing special for the FEC tasks */ + bcom_task_free(tsk); +} +EXPORT_SYMBOL_GPL(bcom_fec_tx_release); + + +MODULE_DESCRIPTION("BestComm FEC tasks driver"); +MODULE_AUTHOR("Dale Farnsworth <dfarnsworth@mvista.com>"); +MODULE_LICENSE("GPL v2"); + diff --git a/arch/powerpc/sysdev/bestcomm/fec.h b/arch/powerpc/sysdev/bestcomm/fec.h new file mode 100644 index 000000000000..ee565d94d503 --- /dev/null +++ b/arch/powerpc/sysdev/bestcomm/fec.h @@ -0,0 +1,61 @@ +/* + * Header for Bestcomm FEC tasks driver + * + * + * Copyright (C) 2006-2007 Sylvain Munaut <tnt@246tNt.com> + * Copyright (C) 2003-2004 MontaVista, Software, Inc. + * ( by Dale Farnsworth <dfarnsworth@mvista.com> ) + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#ifndef __BESTCOMM_FEC_H__ +#define __BESTCOMM_FEC_H__ + + +struct bcom_fec_bd { + u32 status; + u32 skb_pa; +}; + +#define BCOM_FEC_TX_BD_TFD 0x08000000ul /* transmit frame done */ +#define BCOM_FEC_TX_BD_TC 0x04000000ul /* transmit CRC */ +#define BCOM_FEC_TX_BD_ABC 0x02000000ul /* append bad CRC */ + +#define BCOM_FEC_RX_BD_L 0x08000000ul /* buffer is last in frame */ +#define BCOM_FEC_RX_BD_BC 0x00800000ul /* DA is broadcast */ +#define BCOM_FEC_RX_BD_MC 0x00400000ul /* DA is multicast and not broadcast */ +#define BCOM_FEC_RX_BD_LG 0x00200000ul /* Rx frame length violation */ +#define BCOM_FEC_RX_BD_NO 0x00100000ul /* Rx non-octet aligned frame */ +#define BCOM_FEC_RX_BD_CR 0x00040000ul /* Rx CRC error */ +#define BCOM_FEC_RX_BD_OV 0x00020000ul /* overrun */ +#define BCOM_FEC_RX_BD_TR 0x00010000ul /* Rx frame truncated */ +#define BCOM_FEC_RX_BD_LEN_MASK 0x000007fful /* mask for length of received frame */ +#define BCOM_FEC_RX_BD_ERRORS (BCOM_FEC_RX_BD_LG | BCOM_FEC_RX_BD_NO | \ + BCOM_FEC_RX_BD_CR | BCOM_FEC_RX_BD_OV | BCOM_FEC_RX_BD_TR) + + +extern struct bcom_task * +bcom_fec_rx_init(int queue_len, phys_addr_t fifo, int maxbufsize); + +extern int +bcom_fec_rx_reset(struct bcom_task *tsk); + +extern void +bcom_fec_rx_release(struct bcom_task *tsk); + + +extern struct bcom_task * +bcom_fec_tx_init(int queue_len, phys_addr_t fifo); + +extern int +bcom_fec_tx_reset(struct bcom_task *tsk); + +extern void +bcom_fec_tx_release(struct bcom_task *tsk); + + +#endif /* __BESTCOMM_FEC_H__ */ + diff --git a/arch/powerpc/sysdev/bestcomm/gen_bd.c b/arch/powerpc/sysdev/bestcomm/gen_bd.c new file mode 100644 index 000000000000..8d33eafbb3f4 --- /dev/null +++ b/arch/powerpc/sysdev/bestcomm/gen_bd.c @@ -0,0 +1,260 @@ +/* + * Driver for MPC52xx processor BestComm General Buffer Descriptor + * + * Copyright (C) 2007 Sylvain Munaut <tnt@246tNt.com> + * Copyright (C) 2006 AppSpec Computer Technologies Corp. + * Jeff Gibbons <jeff.gibbons@appspec.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#include <linux/version.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/types.h> +#include <asm/errno.h> +#include <asm/io.h> + +#include <asm/mpc52xx.h> + +#include "bestcomm.h" +#include "bestcomm_priv.h" +#include "gen_bd.h" + + +/* ======================================================================== */ +/* Task image/var/inc */ +/* ======================================================================== */ + +/* gen_bd tasks images */ +extern u32 bcom_gen_bd_rx_task[]; +extern u32 bcom_gen_bd_tx_task[]; + +/* rx task vars that need to be set before enabling the task */ +struct bcom_gen_bd_rx_var { + u32 enable; /* (u16*) address of task's control register */ + u32 fifo; /* (u32*) address of gen_bd's fifo */ + u32 bd_base; /* (struct bcom_bd*) beginning of ring buffer */ + u32 bd_last; /* (struct bcom_bd*) end of ring buffer */ + u32 bd_start; /* (struct bcom_bd*) current bd */ + u32 buffer_size; /* size of receive buffer */ +}; + +/* rx task incs that need to be set before enabling the task */ +struct bcom_gen_bd_rx_inc { + u16 pad0; + s16 incr_bytes; + u16 pad1; + s16 incr_dst; +}; + +/* tx task vars that need to be set before enabling the task */ +struct bcom_gen_bd_tx_var { + u32 fifo; /* (u32*) address of gen_bd's fifo */ + u32 enable; /* (u16*) address of task's control register */ + u32 bd_base; /* (struct bcom_bd*) beginning of ring buffer */ + u32 bd_last; /* (struct bcom_bd*) end of ring buffer */ + u32 bd_start; /* (struct bcom_bd*) current bd */ + u32 buffer_size; /* set by uCode for each packet */ +}; + +/* tx task incs that need to be set before enabling the task */ +struct bcom_gen_bd_tx_inc { + u16 pad0; + s16 incr_bytes; + u16 pad1; + s16 incr_src; + u16 pad2; + s16 incr_src_ma; +}; + +/* private structure */ +struct bcom_gen_bd_priv { + phys_addr_t fifo; + int initiator; + int ipr; + int maxbufsize; +}; + + +/* ======================================================================== */ +/* Task support code */ +/* ======================================================================== */ + +struct bcom_task * +bcom_gen_bd_rx_init(int queue_len, phys_addr_t fifo, + int initiator, int ipr, int maxbufsize) +{ + struct bcom_task *tsk; + struct bcom_gen_bd_priv *priv; + + tsk = bcom_task_alloc(queue_len, sizeof(struct bcom_gen_bd), + sizeof(struct bcom_gen_bd_priv)); + if (!tsk) + return NULL; + + tsk->flags = BCOM_FLAGS_NONE; + + priv = tsk->priv; + priv->fifo = fifo; + priv->initiator = initiator; + priv->ipr = ipr; + priv->maxbufsize = maxbufsize; + + if (bcom_gen_bd_rx_reset(tsk)) { + bcom_task_free(tsk); + return NULL; + } + + return tsk; +} +EXPORT_SYMBOL_GPL(bcom_gen_bd_rx_init); + +int +bcom_gen_bd_rx_reset(struct bcom_task *tsk) +{ + struct bcom_gen_bd_priv *priv = tsk->priv; + struct bcom_gen_bd_rx_var *var; + struct bcom_gen_bd_rx_inc *inc; + + /* Shutdown the task */ + bcom_disable_task(tsk->tasknum); + + /* Reset the microcode */ + var = (struct bcom_gen_bd_rx_var *) bcom_task_var(tsk->tasknum); + inc = (struct bcom_gen_bd_rx_inc *) bcom_task_inc(tsk->tasknum); + + if (bcom_load_image(tsk->tasknum, bcom_gen_bd_rx_task)) + return -1; + + var->enable = bcom_eng->regs_base + + offsetof(struct mpc52xx_sdma, tcr[tsk->tasknum]); + var->fifo = (u32) priv->fifo; + var->bd_base = tsk->bd_pa; + var->bd_last = tsk->bd_pa + ((tsk->num_bd-1) * tsk->bd_size); + var->bd_start = tsk->bd_pa; + var->buffer_size = priv->maxbufsize; + + inc->incr_bytes = -(s16)sizeof(u32); + inc->incr_dst = sizeof(u32); + + /* Reset the BDs */ + tsk->index = 0; + tsk->outdex = 0; + + memset(tsk->bd, 0x00, tsk->num_bd * tsk->bd_size); + + /* Configure some stuff */ + bcom_set_task_pragma(tsk->tasknum, BCOM_GEN_RX_BD_PRAGMA); + bcom_set_task_auto_start(tsk->tasknum, tsk->tasknum); + + out_8(&bcom_eng->regs->ipr[priv->initiator], priv->ipr); + bcom_set_initiator(tsk->tasknum, priv->initiator); + + out_be32(&bcom_eng->regs->IntPend, 1<<tsk->tasknum); /* Clear ints */ + + return 0; +} +EXPORT_SYMBOL_GPL(bcom_gen_bd_rx_reset); + +void +bcom_gen_bd_rx_release(struct bcom_task *tsk) +{ + /* Nothing special for the GenBD tasks */ + bcom_task_free(tsk); +} +EXPORT_SYMBOL_GPL(bcom_gen_bd_rx_release); + + +extern struct bcom_task * +bcom_gen_bd_tx_init(int queue_len, phys_addr_t fifo, + int initiator, int ipr) +{ + struct bcom_task *tsk; + struct bcom_gen_bd_priv *priv; + + tsk = bcom_task_alloc(queue_len, sizeof(struct bcom_gen_bd), + sizeof(struct bcom_gen_bd_priv)); + if (!tsk) + return NULL; + + tsk->flags = BCOM_FLAGS_NONE; + + priv = tsk->priv; + priv->fifo = fifo; + priv->initiator = initiator; + priv->ipr = ipr; + + if (bcom_gen_bd_tx_reset(tsk)) { + bcom_task_free(tsk); + return NULL; + } + + return tsk; +} +EXPORT_SYMBOL_GPL(bcom_gen_bd_tx_init); + +int +bcom_gen_bd_tx_reset(struct bcom_task *tsk) +{ + struct bcom_gen_bd_priv *priv = tsk->priv; + struct bcom_gen_bd_tx_var *var; + struct bcom_gen_bd_tx_inc *inc; + + /* Shutdown the task */ + bcom_disable_task(tsk->tasknum); + + /* Reset the microcode */ + var = (struct bcom_gen_bd_tx_var *) bcom_task_var(tsk->tasknum); + inc = (struct bcom_gen_bd_tx_inc *) bcom_task_inc(tsk->tasknum); + + if (bcom_load_image(tsk->tasknum, bcom_gen_bd_tx_task)) + return -1; + + var->enable = bcom_eng->regs_base + + offsetof(struct mpc52xx_sdma, tcr[tsk->tasknum]); + var->fifo = (u32) priv->fifo; + var->bd_base = tsk->bd_pa; + var->bd_last = tsk->bd_pa + ((tsk->num_bd-1) * tsk->bd_size); + var->bd_start = tsk->bd_pa; + + inc->incr_bytes = -(s16)sizeof(u32); + inc->incr_src = sizeof(u32); + inc->incr_src_ma = sizeof(u8); + + /* Reset the BDs */ + tsk->index = 0; + tsk->outdex = 0; + + memset(tsk->bd, 0x00, tsk->num_bd * tsk->bd_size); + + /* Configure some stuff */ + bcom_set_task_pragma(tsk->tasknum, BCOM_GEN_TX_BD_PRAGMA); + bcom_set_task_auto_start(tsk->tasknum, tsk->tasknum); + + out_8(&bcom_eng->regs->ipr[priv->initiator], priv->ipr); + bcom_set_initiator(tsk->tasknum, priv->initiator); + + out_be32(&bcom_eng->regs->IntPend, 1<<tsk->tasknum); /* Clear ints */ + + return 0; +} +EXPORT_SYMBOL_GPL(bcom_gen_bd_tx_reset); + +void +bcom_gen_bd_tx_release(struct bcom_task *tsk) +{ + /* Nothing special for the GenBD tasks */ + bcom_task_free(tsk); +} +EXPORT_SYMBOL_GPL(bcom_gen_bd_tx_release); + + +MODULE_DESCRIPTION("BestComm General Buffer Descriptor tasks driver"); +MODULE_AUTHOR("Jeff Gibbons <jeff.gibbons@appspec.com>"); +MODULE_LICENSE("GPL v2"); + diff --git a/arch/powerpc/sysdev/bestcomm/gen_bd.h b/arch/powerpc/sysdev/bestcomm/gen_bd.h new file mode 100644 index 000000000000..5b6fa803c6aa --- /dev/null +++ b/arch/powerpc/sysdev/bestcomm/gen_bd.h @@ -0,0 +1,48 @@ +/* + * Header for Bestcomm General Buffer Descriptor tasks driver + * + * + * Copyright (C) 2007 Sylvain Munaut <tnt@246tNt.com> + * Copyright (C) 2006 AppSpec Computer Technologies Corp. + * Jeff Gibbons <jeff.gibbons@appspec.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * + */ + +#ifndef __BESTCOMM_GEN_BD_H__ +#define __BESTCOMM_GEN_BD_H__ + +struct bcom_gen_bd { + u32 status; + u32 buf_pa; +}; + + +extern struct bcom_task * +bcom_gen_bd_rx_init(int queue_len, phys_addr_t fifo, + int initiator, int ipr, int maxbufsize); + +extern int +bcom_gen_bd_rx_reset(struct bcom_task *tsk); + +extern void +bcom_gen_bd_rx_release(struct bcom_task *tsk); + + +extern struct bcom_task * +bcom_gen_bd_tx_init(int queue_len, phys_addr_t fifo, + int initiator, int ipr); + +extern int +bcom_gen_bd_tx_reset(struct bcom_task *tsk); + +extern void +bcom_gen_bd_tx_release(struct bcom_task *tsk); + + +#endif /* __BESTCOMM_GEN_BD_H__ */ + diff --git a/arch/powerpc/sysdev/bestcomm/sram.c b/arch/powerpc/sysdev/bestcomm/sram.c new file mode 100644 index 000000000000..99784383a843 --- /dev/null +++ b/arch/powerpc/sysdev/bestcomm/sram.c @@ -0,0 +1,177 @@ +/* + * Simple memory allocator for on-board SRAM + * + * + * Maintainer : Sylvain Munaut <tnt@246tNt.com> + * + * Copyright (C) 2005 Sylvain Munaut <tnt@246tNt.com> + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/spinlock.h> +#include <linux/string.h> +#include <linux/ioport.h> +#include <linux/of.h> + +#include <asm/io.h> +#include <asm/mmu.h> + +#include "sram.h" + + +/* Struct keeping our 'state' */ +struct bcom_sram *bcom_sram = NULL; +EXPORT_SYMBOL_GPL(bcom_sram); /* needed for inline functions */ + + +/* ======================================================================== */ +/* Public API */ +/* ======================================================================== */ +/* DO NOT USE in interrupts, if needed in irq handler, we should use the + _irqsave version of the spin_locks */ + +int bcom_sram_init(struct device_node *sram_node, char *owner) +{ + int rv; + const u32 *regaddr_p; + u64 regaddr64, size64; + unsigned int psize; + + /* Create our state struct */ + if (bcom_sram) { + printk(KERN_ERR "%s: bcom_sram_init: " + "Already initialized !\n", owner); + return -EBUSY; + } + + bcom_sram = kmalloc(sizeof(struct bcom_sram), GFP_KERNEL); + if (!bcom_sram) { + printk(KERN_ERR "%s: bcom_sram_init: " + "Couldn't allocate internal state !\n", owner); + return -ENOMEM; + } + + /* Get address and size of the sram */ + regaddr_p = of_get_address(sram_node, 0, &size64, NULL); + if (!regaddr_p) { + printk(KERN_ERR "%s: bcom_sram_init: " + "Invalid device node !\n", owner); + rv = -EINVAL; + goto error_free; + } + + regaddr64 = of_translate_address(sram_node, regaddr_p); + + bcom_sram->base_phys = (phys_addr_t) regaddr64; + bcom_sram->size = (unsigned int) size64; + + /* Request region */ + if (!request_mem_region(bcom_sram->base_phys, bcom_sram->size, owner)) { + printk(KERN_ERR "%s: bcom_sram_init: " + "Couldn't request region !\n", owner); + rv = -EBUSY; + goto error_free; + } + + /* Map SRAM */ + /* sram is not really __iomem */ + bcom_sram->base_virt = (void*) ioremap(bcom_sram->base_phys, bcom_sram->size); + + if (!bcom_sram->base_virt) { + printk(KERN_ERR "%s: bcom_sram_init: " + "Map error SRAM zone 0x%08lx (0x%0x)!\n", + owner, bcom_sram->base_phys, bcom_sram->size ); + rv = -ENOMEM; + goto error_release; + } + + /* Create an rheap (defaults to 32 bits word alignment) */ + bcom_sram->rh = rh_create(4); + + /* Attach the free zones */ +#if 0 + /* Currently disabled ... for future use only */ + reg_addr_p = of_get_property(sram_node, "available", &psize); +#else + regaddr_p = NULL; + psize = 0; +#endif + + if (!regaddr_p || !psize) { + /* Attach the whole zone */ + rh_attach_region(bcom_sram->rh, 0, bcom_sram->size); + } else { + /* Attach each zone independently */ + while (psize >= 2 * sizeof(u32)) { + phys_addr_t zbase = of_translate_address(sram_node, regaddr_p); + rh_attach_region(bcom_sram->rh, zbase - bcom_sram->base_phys, regaddr_p[1]); + regaddr_p += 2; + psize -= 2 * sizeof(u32); + } + } + + /* Init our spinlock */ + spin_lock_init(&bcom_sram->lock); + + return 0; + +error_release: + release_mem_region(bcom_sram->base_phys, bcom_sram->size); +error_free: + kfree(bcom_sram); + bcom_sram = NULL; + + return rv; +} +EXPORT_SYMBOL_GPL(bcom_sram_init); + +void bcom_sram_cleanup(void) +{ + /* Free resources */ + if (bcom_sram) { + rh_destroy(bcom_sram->rh); + iounmap((void __iomem *)bcom_sram->base_virt); + release_mem_region(bcom_sram->base_phys, bcom_sram->size); + kfree(bcom_sram); + bcom_sram = NULL; + } +} +EXPORT_SYMBOL_GPL(bcom_sram_cleanup); + +void* bcom_sram_alloc(int size, int align, phys_addr_t *phys) +{ + unsigned long offset; + + spin_lock(&bcom_sram->lock); + offset = rh_alloc_align(bcom_sram->rh, size, align, NULL); + spin_unlock(&bcom_sram->lock); + + if (IS_ERR_VALUE(offset)) + return NULL; + + *phys = bcom_sram->base_phys + offset; + return bcom_sram->base_virt + offset; +} +EXPORT_SYMBOL_GPL(bcom_sram_alloc); + +void bcom_sram_free(void *ptr) +{ + unsigned long offset; + + if (!ptr) + return; + + offset = ptr - bcom_sram->base_virt; + + spin_lock(&bcom_sram->lock); + rh_free(bcom_sram->rh, offset); + spin_unlock(&bcom_sram->lock); +} +EXPORT_SYMBOL_GPL(bcom_sram_free); + diff --git a/arch/powerpc/sysdev/bestcomm/sram.h b/arch/powerpc/sysdev/bestcomm/sram.h new file mode 100644 index 000000000000..b6d668963cce --- /dev/null +++ b/arch/powerpc/sysdev/bestcomm/sram.h @@ -0,0 +1,54 @@ +/* + * Handling of a sram zone for bestcomm + * + * + * Copyright (C) 2007 Sylvain Munaut <tnt@246tNt.com> + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#ifndef __BESTCOMM_SRAM_H__ +#define __BESTCOMM_SRAM_H__ + +#include <asm/rheap.h> +#include <asm/mmu.h> +#include <linux/spinlock.h> + + +/* Structure used internally */ + /* The internals are here for the inline functions + * sake, certainly not for the user to mess with ! + */ +struct bcom_sram { + phys_addr_t base_phys; + void *base_virt; + unsigned int size; + rh_info_t *rh; + spinlock_t lock; +}; + +extern struct bcom_sram *bcom_sram; + + +/* Public API */ +extern int bcom_sram_init(struct device_node *sram_node, char *owner); +extern void bcom_sram_cleanup(void); + +extern void* bcom_sram_alloc(int size, int align, phys_addr_t *phys); +extern void bcom_sram_free(void *ptr); + +static inline phys_addr_t bcom_sram_va2pa(void *va) { + return bcom_sram->base_phys + + (unsigned long)(va - bcom_sram->base_virt); +} + +static inline void *bcom_sram_pa2va(phys_addr_t pa) { + return bcom_sram->base_virt + + (unsigned long)(pa - bcom_sram->base_phys); +} + + +#endif /* __BESTCOMM_SRAM_H__ */ + diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig index 20dce4681259..607925c8a99e 100644 --- a/arch/ppc/Kconfig +++ b/arch/ppc/Kconfig @@ -102,6 +102,7 @@ config 44x config 8xx bool "8xx" + select PPC_LIB_RHEAP config E200 bool "e200" @@ -798,6 +799,7 @@ config CPM1 config CPM2 bool depends on 8260 || MPC8560 || MPC8555 + select PPC_LIB_RHEAP default y help The CPM2 (Communications Processor Module) is a coprocessor on @@ -1277,6 +1279,10 @@ config BOOT_LOAD config PIN_TLB bool "Pinned Kernel TLBs (860 ONLY)" depends on ADVANCED_OPTIONS && 8xx + +config PPC_LIB_RHEAP + bool + endmenu source "net/Kconfig" diff --git a/include/asm-ppc/mpc52xx_psc.h b/include/asm-ppc/mpc52xx_psc.h index 9d850b2b20b8..c82b8d49a7da 100644 --- a/include/asm-ppc/mpc52xx_psc.h +++ b/include/asm-ppc/mpc52xx_psc.h @@ -28,6 +28,10 @@ #define MPC52xx_PSC_MAXNUM 6 /* Programmable Serial Controller (PSC) status register bits */ +#define MPC52xx_PSC_SR_UNEX_RX 0x0001 +#define MPC52xx_PSC_SR_DATA_VAL 0x0002 +#define MPC52xx_PSC_SR_DATA_OVR 0x0004 +#define MPC52xx_PSC_SR_CMDSEND 0x0008 #define MPC52xx_PSC_SR_CDE 0x0080 #define MPC52xx_PSC_SR_RXRDY 0x0100 #define MPC52xx_PSC_SR_RXFULL 0x0200 @@ -132,8 +136,10 @@ struct mpc52xx_psc { u8 reserved5[3]; u8 ctlr; /* PSC + 0x1c */ u8 reserved6[3]; - u16 ccr; /* PSC + 0x20 */ - u8 reserved7[14]; + u32 ccr; /* PSC + 0x20 */ + u32 ac97_slots; /* PSC + 0x24 */ + u32 ac97_cmd; /* PSC + 0x28 */ + u32 ac97_data; /* PSC + 0x2c */ u8 ivr; /* PSC + 0x30 */ u8 reserved8[3]; u8 ip; /* PSC + 0x34 */ |