diff options
| -rw-r--r-- | Documentation/devicetree/bindings/serial/sirf-uart.txt | 15 | ||||
| -rw-r--r-- | drivers/tty/serial/sirfsoc_uart.c | 34 | ||||
| -rw-r--r-- | drivers/tty/serial/sirfsoc_uart.h | 4 |
3 files changed, 8 insertions, 45 deletions
diff --git a/Documentation/devicetree/bindings/serial/sirf-uart.txt b/Documentation/devicetree/bindings/serial/sirf-uart.txt index f0c39261c5d4..67e2a0aeb042 100644 --- a/Documentation/devicetree/bindings/serial/sirf-uart.txt +++ b/Documentation/devicetree/bindings/serial/sirf-uart.txt @@ -2,8 +2,7 @@ Required properties: - compatible : Should be "sirf,prima2-uart", "sirf, prima2-usp-uart", - "sirf,atlas7-uart" or "sirf,atlas7-bt-uart" which means - uart located in BT module and used for BT. + "sirf,atlas7-uart" or "sirf,atlas7-usp-uart". - reg : Offset and length of the register set for the device - interrupts : Should contain uart interrupt - fifosize : Should define hardware rx/tx fifo size @@ -33,15 +32,3 @@ usp@b0090000 { rts-gpios = <&gpio 15 0>; cts-gpios = <&gpio 46 0>; }; - -for uart use in BT module, -uart6: uart@11000000 { - cell-index = <6>; - compatible = "sirf,atlas7-bt-uart", "sirf,atlas7-uart"; - reg = <0x11000000 0x1000>; - interrupts = <0 100 0>; - clocks = <&clks 138>, <&clks 140>, <&clks 141>; - clock-names = "uart", "general", "noc"; - fifosize = <128>; - status = "disabled"; -} diff --git a/drivers/tty/serial/sirfsoc_uart.c b/drivers/tty/serial/sirfsoc_uart.c index 9de3eabe5737..8081cdba8778 100644 --- a/drivers/tty/serial/sirfsoc_uart.c +++ b/drivers/tty/serial/sirfsoc_uart.c @@ -1032,19 +1032,10 @@ static void sirfsoc_uart_pm(struct uart_port *port, unsigned int state, unsigned int oldstate) { struct sirfsoc_uart_port *sirfport = to_sirfport(port); - if (!state) { - if (sirfport->is_bt_uart) { - clk_prepare_enable(sirfport->clk_noc); - clk_prepare_enable(sirfport->clk_general); - } + if (!state) clk_prepare_enable(sirfport->clk); - } else { + else clk_disable_unprepare(sirfport->clk); - if (sirfport->is_bt_uart) { - clk_disable_unprepare(sirfport->clk_general); - clk_disable_unprepare(sirfport->clk_noc); - } - } } static int sirfsoc_uart_startup(struct uart_port *port) @@ -1387,26 +1378,12 @@ usp_no_flow_control: } port->irq = res->start; - sirfport->clk = devm_clk_get(&pdev->dev, NULL); + sirfport->clk = clk_get(&pdev->dev, NULL); if (IS_ERR(sirfport->clk)) { ret = PTR_ERR(sirfport->clk); goto err; } port->uartclk = clk_get_rate(sirfport->clk); - if (of_device_is_compatible(pdev->dev.of_node, "sirf,atlas7-bt-uart")) { - sirfport->clk_general = devm_clk_get(&pdev->dev, "general"); - if (IS_ERR(sirfport->clk_general)) { - ret = PTR_ERR(sirfport->clk_general); - goto err; - } - sirfport->clk_noc = devm_clk_get(&pdev->dev, "noc"); - if (IS_ERR(sirfport->clk_noc)) { - ret = PTR_ERR(sirfport->clk_noc); - goto err; - } - sirfport->is_bt_uart = true; - } else - sirfport->is_bt_uart = false; port->ops = &sirfsoc_uart_ops; spin_lock_init(&port->lock); @@ -1415,7 +1392,7 @@ usp_no_flow_control: ret = uart_add_one_port(&sirfsoc_uart_drv, port); if (ret != 0) { dev_err(&pdev->dev, "Cannot add UART port(%d).\n", pdev->id); - goto err; + goto port_err; } sirfport->rx_dma_chan = dma_request_slave_channel(port->dev, "rx"); @@ -1444,6 +1421,8 @@ alloc_coherent_err: sirfport->rx_dma_items[j].xmit.buf, sirfport->rx_dma_items[j].dma_addr); dma_release_channel(sirfport->rx_dma_chan); +port_err: + clk_put(sirfport->clk); err: return ret; } @@ -1452,6 +1431,7 @@ static int sirfsoc_uart_remove(struct platform_device *pdev) { struct sirfsoc_uart_port *sirfport = platform_get_drvdata(pdev); struct uart_port *port = &sirfport->port; + clk_put(sirfport->clk); uart_remove_one_port(&sirfsoc_uart_drv, port); if (sirfport->rx_dma_chan) { int i; diff --git a/drivers/tty/serial/sirfsoc_uart.h b/drivers/tty/serial/sirfsoc_uart.h index 727eb6b88fff..11fd6814f76d 100644 --- a/drivers/tty/serial/sirfsoc_uart.h +++ b/drivers/tty/serial/sirfsoc_uart.h @@ -417,10 +417,6 @@ struct sirfsoc_uart_port { struct uart_port port; struct clk *clk; - /* UART6 for BT usage in A7DA platform need multi-clock source */ - bool is_bt_uart; - struct clk *clk_general; - struct clk *clk_noc; /* for SiRFatlas7, there are SET/CLR for UART_INT_EN */ bool is_atlas7; struct sirfsoc_uart_register *uart_reg; |