aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--Documentation/devicetree/bindings/leds/leds-lm3692x.txt8
-rw-r--r--Documentation/devicetree/bindings/mfd/tps6105x.txt47
-rw-r--r--drivers/leds/Kconfig10
-rw-r--r--drivers/leds/Makefile1
-rw-r--r--drivers/leds/led-class.c97
-rw-r--r--drivers/leds/leds-bd2802.c27
-rw-r--r--drivers/leds/leds-lm3532.c8
-rw-r--r--drivers/leds/leds-lm3642.c37
-rw-r--r--drivers/leds/leds-lm3692x.c180
-rw-r--r--drivers/leds/leds-pca963x.c8
-rw-r--r--drivers/leds/leds-tps6105x.c89
-rw-r--r--include/linux/leds-bd2802.h1
-rw-r--r--include/linux/leds.h6
13 files changed, 425 insertions, 94 deletions
diff --git a/Documentation/devicetree/bindings/leds/leds-lm3692x.txt b/Documentation/devicetree/bindings/leds/leds-lm3692x.txt
index 4c2d923f8758..501468aa4d38 100644
--- a/Documentation/devicetree/bindings/leds/leds-lm3692x.txt
+++ b/Documentation/devicetree/bindings/leds/leds-lm3692x.txt
@@ -18,6 +18,10 @@ Required properties:
Optional properties:
- enable-gpios : gpio pin to enable/disable the device.
- vled-supply : LED supply
+ - ti,ovp-microvolt: Overvoltage protection in
+ micro-volt, can be 17000000, 21000000, 25000000 or
+ 29000000. If ti,ovp-microvolt is not specified it
+ defaults to 29000000.
Required child properties:
- reg : 0 - Will enable all LED sync paths
@@ -31,6 +35,8 @@ Optional child properties:
- label : see Documentation/devicetree/bindings/leds/common.txt (deprecated)
- linux,default-trigger :
see Documentation/devicetree/bindings/leds/common.txt
+ - led-max-microamp :
+ see Documentation/devicetree/bindings/leds/common.txt
Example:
@@ -44,12 +50,14 @@ led-controller@36 {
enable-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
vled-supply = <&vbatt>;
+ ti,ovp-microvolt = <29000000>;
led@0 {
reg = <0>;
function = LED_FUNCTION_BACKLIGHT;
color = <LED_COLOR_ID_WHITE>;
linux,default-trigger = "backlight";
+ led-max-microamp = <20000>;
};
}
diff --git a/Documentation/devicetree/bindings/mfd/tps6105x.txt b/Documentation/devicetree/bindings/mfd/tps6105x.txt
index 93602c7a19c8..dc448a9d5b4d 100644
--- a/Documentation/devicetree/bindings/mfd/tps6105x.txt
+++ b/Documentation/devicetree/bindings/mfd/tps6105x.txt
@@ -7,11 +7,56 @@ Required properties:
- compatible: "ti,tps61050" or "ti,tps61052"
- reg: Specifies the I2C slave address
-Example:
+Optional sub-node:
+
+This subnode selects the chip's operational mode.
+There can be at most one single available subnode.
+
+- regulator: presence of this sub-node puts the chip in regulator mode.
+ see ../regulator/regulator.yaml
+
+- led: presence of this sub-node puts the chip in led mode.
+ Optional properties:
+ - function : see ../leds/common.txt
+ - color : see ../leds/common.txt
+ - label : see ../leds/common.txt
+ (deprecated)
+
+Example (GPIO operation only):
+
+i2c0 {
+ tps61052@33 {
+ compatible = "ti,tps61052";
+ reg = <0x33>;
+ };
+};
+
+Example (GPIO + regulator operation):
i2c0 {
tps61052@33 {
compatible = "ti,tps61052";
reg = <0x33>;
+
+ regulator {
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+ };
+};
+
+Example (GPIO + led operation):
+
+#include <dt-bindings/leds/common.h>
+
+i2c0 {
+ tps61052@33 {
+ compatible = "ti,tps61052";
+ reg = <0x33>;
+
+ led {
+ color = <LED_COLOR_ID_WHITE>;
+ };
};
};
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 4b68520ac251..d82f1dea3711 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -836,6 +836,16 @@ config LEDS_LM36274
Say Y to enable the LM36274 LED driver for TI LMU devices.
This supports the LED device LM36274.
+config LEDS_TPS6105X
+ tristate "LED support for TI TPS6105X"
+ depends on LEDS_CLASS
+ depends on TPS6105X
+ default y if TPS6105X
+ help
+ This driver supports TPS61050/TPS61052 LED chips.
+ It is a single boost converter primarily for white LEDs and
+ audio amplifiers.
+
comment "LED Triggers"
source "drivers/leds/trigger/Kconfig"
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index 2da39e896ce8..d7e1107753fb 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -85,6 +85,7 @@ obj-$(CONFIG_LEDS_LM3601X) += leds-lm3601x.o
obj-$(CONFIG_LEDS_TI_LMU_COMMON) += leds-ti-lmu-common.o
obj-$(CONFIG_LEDS_LM3697) += leds-lm3697.o
obj-$(CONFIG_LEDS_LM36274) += leds-lm36274.o
+obj-$(CONFIG_LEDS_TPS6105X) += leds-tps6105x.o
# LED SPI Drivers
obj-$(CONFIG_LEDS_CR0014114) += leds-cr0014114.o
diff --git a/drivers/leds/led-class.c b/drivers/leds/led-class.c
index 438774315e6c..1fc40e8af75e 100644
--- a/drivers/leds/led-class.c
+++ b/drivers/leds/led-class.c
@@ -19,6 +19,7 @@
#include <linux/spinlock.h>
#include <linux/timer.h>
#include <uapi/linux/uleds.h>
+#include <linux/of.h>
#include "leds.h"
static struct class *leds_class;
@@ -214,6 +215,98 @@ static int led_resume(struct device *dev)
static SIMPLE_DEV_PM_OPS(leds_class_dev_pm_ops, led_suspend, led_resume);
+/**
+ * of_led_get() - request a LED device via the LED framework
+ * @np: device node to get the LED device from
+ * @index: the index of the LED
+ *
+ * Returns the LED device parsed from the phandle specified in the "leds"
+ * property of a device tree node or a negative error-code on failure.
+ */
+struct led_classdev *of_led_get(struct device_node *np, int index)
+{
+ struct device *led_dev;
+ struct led_classdev *led_cdev;
+ struct device_node *led_node;
+
+ led_node = of_parse_phandle(np, "leds", index);
+ if (!led_node)
+ return ERR_PTR(-ENOENT);
+
+ led_dev = class_find_device_by_of_node(leds_class, led_node);
+ of_node_put(led_node);
+
+ if (!led_dev)
+ return ERR_PTR(-EPROBE_DEFER);
+
+ led_cdev = dev_get_drvdata(led_dev);
+
+ if (!try_module_get(led_cdev->dev->parent->driver->owner))
+ return ERR_PTR(-ENODEV);
+
+ return led_cdev;
+}
+EXPORT_SYMBOL_GPL(of_led_get);
+
+/**
+ * led_put() - release a LED device
+ * @led_cdev: LED device
+ */
+void led_put(struct led_classdev *led_cdev)
+{
+ module_put(led_cdev->dev->parent->driver->owner);
+}
+EXPORT_SYMBOL_GPL(led_put);
+
+static void devm_led_release(struct device *dev, void *res)
+{
+ struct led_classdev **p = res;
+
+ led_put(*p);
+}
+
+/**
+ * devm_of_led_get - Resource-managed request of a LED device
+ * @dev: LED consumer
+ * @index: index of the LED to obtain in the consumer
+ *
+ * The device node of the device is parse to find the request LED device.
+ * The LED device returned from this function is automatically released
+ * on driver detach.
+ *
+ * @return a pointer to a LED device or ERR_PTR(errno) on failure.
+ */
+struct led_classdev *__must_check devm_of_led_get(struct device *dev,
+ int index)
+{
+ struct led_classdev *led;
+ struct led_classdev **dr;
+
+ if (!dev)
+ return ERR_PTR(-EINVAL);
+
+ /* Not using device tree? */
+ if (!IS_ENABLED(CONFIG_OF) || !dev->of_node)
+ return ERR_PTR(-ENOTSUPP);
+
+ led = of_led_get(dev->of_node, index);
+ if (IS_ERR(led))
+ return led;
+
+ dr = devres_alloc(devm_led_release, sizeof(struct led_classdev *),
+ GFP_KERNEL);
+ if (!dr) {
+ led_put(led);
+ return ERR_PTR(-ENOMEM);
+ }
+
+ *dr = led;
+ devres_add(dev, dr);
+
+ return led;
+}
+EXPORT_SYMBOL_GPL(devm_of_led_get);
+
static int led_classdev_next_name(const char *init_name, char *name,
size_t len)
{
@@ -276,8 +369,10 @@ int led_classdev_register_ext(struct device *parent,
mutex_unlock(&led_cdev->led_access);
return PTR_ERR(led_cdev->dev);
}
- if (init_data && init_data->fwnode)
+ if (init_data && init_data->fwnode) {
led_cdev->dev->fwnode = init_data->fwnode;
+ led_cdev->dev->of_node = to_of_node(init_data->fwnode);
+ }
if (ret)
dev_warn(parent, "Led %s renamed to %s due to name collision",
diff --git a/drivers/leds/leds-bd2802.c b/drivers/leds/leds-bd2802.c
index e7ec6bff2b5f..bd61a823d0ca 100644
--- a/drivers/leds/leds-bd2802.c
+++ b/drivers/leds/leds-bd2802.c
@@ -10,7 +10,7 @@
#include <linux/module.h>
#include <linux/i2c.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/delay.h>
#include <linux/leds.h>
#include <linux/leds-bd2802.h>
@@ -67,6 +67,7 @@ struct led_state {
struct bd2802_led {
struct bd2802_led_platform_data *pdata;
struct i2c_client *client;
+ struct gpio_desc *reset;
struct rw_semaphore rwsem;
struct led_state led[2];
@@ -200,7 +201,7 @@ static void bd2802_update_state(struct bd2802_led *led, enum led_ids id,
return;
if (bd2802_is_all_off(led) && !led->adf_on) {
- gpio_set_value(led->pdata->reset_gpio, 0);
+ gpiod_set_value(led->reset, 1);
return;
}
@@ -226,7 +227,7 @@ static void bd2802_configure(struct bd2802_led *led)
static void bd2802_reset_cancel(struct bd2802_led *led)
{
- gpio_set_value(led->pdata->reset_gpio, 1);
+ gpiod_set_value(led->reset, 0);
udelay(100);
bd2802_configure(led);
}
@@ -420,7 +421,7 @@ static void bd2802_disable_adv_conf(struct bd2802_led *led)
bd2802_addr_attributes[i]);
if (bd2802_is_all_off(led))
- gpio_set_value(led->pdata->reset_gpio, 0);
+ gpiod_set_value(led->reset, 1);
led->adf_on = 0;
}
@@ -670,8 +671,16 @@ static int bd2802_probe(struct i2c_client *client,
pdata = led->pdata = dev_get_platdata(&client->dev);
i2c_set_clientdata(client, led);
- /* Configure RESET GPIO (L: RESET, H: RESET cancel) */
- gpio_request_one(pdata->reset_gpio, GPIOF_OUT_INIT_HIGH, "RGB_RESETB");
+ /*
+ * Configure RESET GPIO (L: RESET, H: RESET cancel)
+ *
+ * We request the reset GPIO as OUT_LOW which means de-asserted,
+ * board files specifying this GPIO line in a machine descriptor
+ * table should take care to specify GPIO_ACTIVE_LOW for this line.
+ */
+ led->reset = devm_gpiod_get(&client->dev, "reset", GPIOD_OUT_LOW);
+ if (IS_ERR(led->reset))
+ return PTR_ERR(led->reset);
/* Tacss = min 0.1ms */
udelay(100);
@@ -685,7 +694,7 @@ static int bd2802_probe(struct i2c_client *client,
dev_info(&client->dev, "return 0x%02x\n", ret);
/* To save the power, reset BD2802 after detecting */
- gpio_set_value(led->pdata->reset_gpio, 0);
+ gpiod_set_value(led->reset, 1);
/* Default attributes */
led->wave_pattern = BD2802_PATTERN_HALF;
@@ -720,7 +729,7 @@ static int bd2802_remove(struct i2c_client *client)
struct bd2802_led *led = i2c_get_clientdata(client);
int i;
- gpio_set_value(led->pdata->reset_gpio, 0);
+ gpiod_set_value(led->reset, 1);
bd2802_unregister_led_classdev(led);
if (led->adf_on)
bd2802_disable_adv_conf(led);
@@ -750,7 +759,7 @@ static int bd2802_suspend(struct device *dev)
struct i2c_client *client = to_i2c_client(dev);
struct bd2802_led *led = i2c_get_clientdata(client);
- gpio_set_value(led->pdata->reset_gpio, 0);
+ gpiod_set_value(led->reset, 1);
return 0;
}
diff --git a/drivers/leds/leds-lm3532.c b/drivers/leds/leds-lm3532.c
index 491268bb34a7..188a57da981a 100644
--- a/drivers/leds/leds-lm3532.c
+++ b/drivers/leds/leds-lm3532.c
@@ -578,6 +578,12 @@ static int lm3532_parse_node(struct lm3532_data *priv)
priv->runtime_ramp_down = lm3532_get_ramp_index(ramp_time);
device_for_each_child_node(priv->dev, child) {
+ struct led_init_data idata = {
+ .fwnode = child,
+ .default_label = ":",
+ .devicename = priv->client->name,
+ };
+
led = &priv->leds[i];
ret = fwnode_property_read_u32(child, "reg", &control_bank);
@@ -652,7 +658,7 @@ static int lm3532_parse_node(struct lm3532_data *priv)
led->led_dev.name = led->label;
led->led_dev.brightness_set_blocking = lm3532_brightness_set;
- ret = devm_led_classdev_register(priv->dev, &led->led_dev);
+ ret = devm_led_classdev_register_ext(priv->dev, &led->led_dev, &idata);
if (ret) {
dev_err(&priv->client->dev, "led register err: %d\n",
ret);
diff --git a/drivers/leds/leds-lm3642.c b/drivers/leds/leds-lm3642.c
index 480575442ed8..4232906fcb75 100644
--- a/drivers/leds/leds-lm3642.c
+++ b/drivers/leds/leds-lm3642.c
@@ -106,7 +106,7 @@ static int lm3642_control(struct lm3642_chip_data *chip,
ret = regmap_read(chip->regmap, REG_FLAG, &chip->last_flag);
if (ret < 0) {
dev_err(chip->dev, "Failed to read REG_FLAG Register\n");
- goto out;
+ return ret;
}
if (chip->last_flag)
@@ -146,11 +146,11 @@ static int lm3642_control(struct lm3642_chip_data *chip,
break;
default:
- return ret;
+ return -EINVAL;
}
if (ret < 0) {
dev_err(chip->dev, "Failed to write REG_I_CTRL Register\n");
- goto out;
+ return ret;
}
if (chip->tx_pin)
@@ -159,13 +159,12 @@ static int lm3642_control(struct lm3642_chip_data *chip,
ret = regmap_update_bits(chip->regmap, REG_ENABLE,
MODE_BITS_MASK << MODE_BITS_SHIFT,
opmode << MODE_BITS_SHIFT);
-out:
return ret;
}
/* torch */
-/* torch pin config for lm3642*/
+/* torch pin config for lm3642 */
static ssize_t lm3642_torch_pin_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t size)
@@ -178,7 +177,7 @@ static ssize_t lm3642_torch_pin_store(struct device *dev,
ret = kstrtouint(buf, 10, &state);
if (ret)
- goto out_strtoint;
+ return ret;
if (state != 0)
state = 0x01 << TORCH_PIN_EN_SHIFT;
@@ -186,16 +185,12 @@ static ssize_t lm3642_torch_pin_store(struct device *dev,
ret = regmap_update_bits(chip->regmap, REG_ENABLE,
TORCH_PIN_EN_MASK << TORCH_PIN_EN_SHIFT,
state);
- if (ret < 0)
- goto out;
+ if (ret < 0) {
+ dev_err(chip->dev, "%s:i2c access fail to register\n", __func__);
+ return ret;
+ }
return size;
-out:
- dev_err(chip->dev, "%s:i2c access fail to register\n", __func__);
- return ret;
-out_strtoint:
- dev_err(chip->dev, "%s: fail to change str to int\n", __func__);
- return ret;
}
static DEVICE_ATTR(torch_pin, S_IWUSR, NULL, lm3642_torch_pin_store);
@@ -229,7 +224,7 @@ static ssize_t lm3642_strobe_pin_store(struct device *dev,
ret = kstrtouint(buf, 10, &state);
if (ret)
- goto out_strtoint;
+ return ret;
if (state != 0)
state = 0x01 << STROBE_PIN_EN_SHIFT;
@@ -237,16 +232,12 @@ static ssize_t lm3642_strobe_pin_store(struct device *dev,
ret = regmap_update_bits(chip->regmap, REG_ENABLE,
STROBE_PIN_EN_MASK << STROBE_PIN_EN_SHIFT,
state);
- if (ret < 0)
- goto out;
+ if (ret < 0) {
+ dev_err(chip->dev, "%s:i2c access fail to register\n", __func__);
+ return ret;
+ }
return size;
-out:
- dev_err(chip->dev, "%s:i2c access fail to register\n", __func__);
- return ret;
-out_strtoint:
- dev_err(chip->dev, "%s: fail to change str to int\n", __func__);
- return ret;
}
static DEVICE_ATTR(strobe_pin, S_IWUSR, NULL, lm3642_strobe_pin_store);
diff --git a/drivers/leds/leds-lm3692x.c b/drivers/leds/leds-lm3692x.c
index 8b408102e138..28a51aeb28de 100644
--- a/drivers/leds/leds-lm3692x.c
+++ b/drivers/leds/leds-lm3692x.c
@@ -6,6 +6,7 @@
#include <linux/i2c.h>
#include <linux/init.h>
#include <linux/leds.h>
+#include <linux/log2.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/of.h>
@@ -114,6 +115,9 @@ struct lm3692x_led {
struct regulator *regulator;
int led_enable;
int model_id;
+
+ u8 boost_ctrl, brightness_ctrl;
+ bool enabled;
};
static const struct reg_default lm3692x_reg_defs[] = {
@@ -162,44 +166,14 @@ static int lm3692x_fault_check(struct lm3692x_led *led)
return read_buf;
}
-static int lm3692x_brightness_set(struct led_classdev *led_cdev,
- enum led_brightness brt_val)
-{
- struct lm3692x_led *led =
- container_of(led_cdev, struct lm3692x_led, led_dev);
- int ret;
- int led_brightness_lsb = (brt_val >> 5);
-
- mutex_lock(&led->lock);
-
- ret = lm3692x_fault_check(led);
- if (ret) {
- dev_err(&led->client->dev, "Cannot read/clear faults: %d\n",
- ret);
- goto out;
- }
-
- ret = regmap_write(led->regmap, LM3692X_BRT_MSB, brt_val);
- if (ret) {
- dev_err(&led->client->dev, "Cannot write MSB: %d\n", ret);
- goto out;
- }
-
- ret = regmap_write(led->regmap, LM3692X_BRT_LSB, led_brightness_lsb);
- if (ret) {
- dev_err(&led->client->dev, "Cannot write LSB: %d\n", ret);
- goto out;
- }
-out:
- mutex_unlock(&led->lock);
- return ret;
-}
-
-static int lm3692x_init(struct lm3692x_led *led)
+static int lm3692x_leds_enable(struct lm3692x_led *led)
{
int enable_state;
int ret, reg_ret;
+ if (led->enabled)
+ return 0;
+
if (led->regulator) {
ret = regulator_enable(led->regulator);
if (ret) {
@@ -249,10 +223,7 @@ static int lm3692x_init(struct lm3692x_led *led)
if (ret)
goto out;
- ret = regmap_write(led->regmap, LM3692X_BOOST_CTRL,
- LM3692X_BOOST_SW_1MHZ |
- LM3692X_BOOST_SW_NO_SHIFT |
- LM3692X_OCP_PROT_1_5A);
+ ret = regmap_write(led->regmap, LM3692X_BOOST_CTRL, led->boost_ctrl);
if (ret)
goto out;
@@ -305,6 +276,7 @@ static int lm3692x_init(struct lm3692x_led *led)
ret = regmap_update_bits(led->regmap, LM3692X_EN, LM3692X_ENABLE_MASK,
enable_state | LM3692X_DEVICE_EN);
+ led->enabled = true;
return ret;
out:
dev_err(&led->client->dev, "Fail writing initialization values\n");
@@ -322,10 +294,92 @@ out:
return ret;
}
+static int lm3692x_leds_disable(struct lm3692x_led *led)
+{
+ int ret;
+
+ if (!led->enabled)
+ return 0;
+
+ ret = regmap_update_bits(led->regmap, LM3692X_EN, LM3692X_DEVICE_EN, 0);
+ if (ret) {
+ dev_err(&led->client->dev, "Failed to disable regulator: %d\n",
+ ret);
+ return ret;
+ }
+
+ if (led->enable_gpio)
+ gpiod_direction_output(led->enable_gpio, 0);
+
+ if (led->regulator) {
+ ret = regulator_disable(led->regulator);
+ if (ret)
+ dev_err(&led->client->dev,
+ "Failed to disable regulator: %d\n", ret);
+ }
+
+ led->enabled = false;
+ return ret;
+}
+
+static int lm3692x_brightness_set(struct led_classdev *led_cdev,
+ enum led_brightness brt_val)
+{
+ struct lm3692x_led *led =
+ container_of(led_cdev, struct lm3692x_led, led_dev);
+ int ret;
+ int led_brightness_lsb = (brt_val >> 5);
+
+ mutex_lock(&led->lock);
+
+ if (brt_val == 0) {
+ ret = lm3692x_leds_disable(led);
+ goto out;
+ } else {
+ lm3692x_leds_enable(led);
+ }
+
+ ret = lm3692x_fault_check(led);
+ if (ret) {
+ dev_err(&led->client->dev, "Cannot read/clear faults: %d\n",
+ ret);
+ goto out;
+ }
+
+ ret = regmap_write(led->regmap, LM3692X_BRT_MSB, brt_val);
+ if (ret) {
+ dev_err(&led->client->dev, "Cannot write MSB: %d\n", ret);
+ goto out;
+ }
+
+ ret = regmap_write(led->regmap, LM3692X_BRT_LSB, led_brightness_lsb);
+ if (ret) {
+ dev_err(&led->client->dev, "Cannot write LSB: %d\n", ret);
+ goto out;
+ }
+out:
+ mutex_unlock(&led->lock);
+ return ret;
+}
+
+static enum led_brightness lm3692x_max_brightness(struct lm3692x_led *led,
+ u32 max_cur)
+{
+ u32 max_code;
+
+ /* see p.12 of LM36922 data sheet for brightness formula */
+ max_code = ((max_cur * 1000) - 37806) / 12195;
+ if (max_code > 0x7FF)
+ max_code = 0x7FF;
+
+ return max_code >> 3;
+}
+
static int lm3692x_probe_dt(struct lm3692x_led *led)
{
struct fwnode_handle *child = NULL;
struct led_init_data init_data = {};
+ u32 ovp, max_cur;
int ret;
led->enable_gpio = devm_gpiod_get_optional(&led->client->dev,
@@ -350,6 +404,32 @@ static int lm3692x_probe_dt(struct lm3692x_led *led)
led->regulator = NULL;
}
+ led->boost_ctrl = LM3692X_BOOST_SW_1MHZ |
+ LM3692X_BOOST_SW_NO_SHIFT |
+ LM3692X_OCP_PROT_1_5A;
+ ret = device_property_read_u32(&led->client->dev,
+ "ti,ovp-microvolt", &ovp);
+ if (ret) {
+ led->boost_ctrl |= LM3692X_OVP_29V;
+ } else {
+ switch (ovp) {
+ case 17000000:
+ break;
+ case 21000000:
+ led->boost_ctrl |= LM3692X_OVP_21V;
+ break;
+ case 25000000:
+ led->boost_ctrl |= LM3692X_OVP_25V;
+ break;
+ case 29000000:
+ led->boost_ctrl |= LM3692X_OVP_29V;
+ break;
+ default:
+ dev_err(&led->client->dev, "Invalid OVP %d\n", ovp);
+ return -EINVAL;
+ }
+ }
+
child = device_get_next_child_node(&led->client->dev, child);
if (!child) {
dev_err(&led->client->dev, "No LED Child node\n");
@@ -365,6 +445,10 @@ static int lm3692x_probe_dt(struct lm3692x_led *led)
return ret;
}
+ ret = fwnode_property_read_u32(child, "led-max-microamp", &max_cur);
+ led->led_dev.max_brightness = ret ? LED_FULL :
+ lm3692x_max_brightness(led, max_cur);
+
init_data.fwnode = child;
init_data.devicename = led->client->name;
init_data.default_label = ":";
@@ -407,7 +491,7 @@ static int lm3692x_probe(struct i2c_client *client,
if (ret)
return ret;
- ret = lm3692x_init(led);
+ ret = lm3692x_leds_enable(led);
if (ret)
return ret;
@@ -419,23 +503,9 @@ static int lm3692x_remove(struct i2c_client *client)
struct lm3692x_led *led = i2c_get_clientdata(client);
int ret;
- ret = regmap_update_bits(led->regmap, LM3692X_EN, LM3692X_DEVICE_EN, 0);
- if (ret) {
- dev_err(&led->client->dev, "Failed to disable regulator: %d\n",
- ret);
+ ret = lm3692x_leds_disable(led);
+ if (ret)
return ret;
- }
-
- if (led->enable_gpio)
- gpiod_direction_output(led->enable_gpio, 0);
-
- if (led->regulator) {
- ret = regulator_disable(led->regulator);
- if (ret)
- dev_err(&led->client->dev,
- "Failed to disable regulator: %d\n", ret);
- }
-
mutex_destroy(&led->lock);
return 0;
diff --git a/drivers/leds/leds-pca963x.c b/drivers/leds/leds-pca963x.c
index 4afc317901a8..66cdc003b8f4 100644
--- a/drivers/leds/leds-pca963x.c
+++ b/drivers/leds/leds-pca963x.c
@@ -40,6 +40,8 @@
#define PCA963X_LED_PWM 0x2 /* Controlled through PWM */
#define PCA963X_LED_GRP_PWM 0x3 /* Controlled through PWM/GRPPWM */
+#define PCA963X_MODE2_OUTDRV 0x04 /* Open-drain or totem pole */
+#define PCA963X_MODE2_INVRT 0x10 /* Normal or inverted direction */
#define PCA963X_MODE2_DMBLNK 0x20 /* Enable blinking */
#define PCA963X_MODE1 0x00
@@ -438,12 +440,12 @@ static int pca963x_probe(struct i2c_client *client,
PCA963X_MODE2);
/* Configure output: open-drain or totem pole (push-pull) */
if (pdata->outdrv == PCA963X_OPEN_DRAIN)
- mode2 |= 0x01;
+ mode2 &= ~PCA963X_MODE2_OUTDRV;
else
- mode2 |= 0x05;
+ mode2 |= PCA963X_MODE2_OUTDRV;
/* Configure direction: normal or inverted */
if (pdata->dir == PCA963X_INVERTED)
- mode2 |= 0x10;
+ mode2 |= PCA963X_MODE2_INVRT;
i2c_smbus_write_byte_data(pca963x->chip->client, PCA963X_MODE2,
mode2);
}
diff --git a/drivers/leds/leds-tps6105x.c b/drivers/leds/leds-tps6105x.c
new file mode 100644
index 000000000000..09fd88a6c8f0
--- /dev/null
+++ b/drivers/leds/leds-tps6105x.c
@@ -0,0 +1,89 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2019 Sven Van Asbroeck
+ */
+
+#include <linux/leds.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/tps6105x.h>
+#include <linux/regmap.h>
+
+struct tps6105x_priv {
+ struct regmap *regmap;
+ struct led_classdev cdev;
+ struct fwnode_handle *fwnode;
+};
+
+static void tps6105x_handle_put(void *data)
+{
+ struct tps6105x_priv *priv = data;
+
+ fwnode_handle_put(priv->fwnode);
+}
+
+static int tps6105x_brightness_set(struct led_classdev *cdev,
+ enum led_brightness brightness)
+{
+ struct tps6105x_priv *priv = container_of(cdev, struct tps6105x_priv,
+ cdev);
+
+ return regmap_update_bits(priv->regmap, TPS6105X_REG_0,
+ TPS6105X_REG0_TORCHC_MASK,
+ brightness << TPS6105X_REG0_TORCHC_SHIFT);
+}
+
+static int tps6105x_led_probe(struct platform_device *pdev)
+{
+ struct tps6105x *tps6105x = dev_get_platdata(&pdev->dev);
+ struct tps6105x_platform_data *pdata = tps6105x->pdata;
+ struct led_init_data init_data = { };
+ struct tps6105x_priv *priv;
+ int ret;
+
+ /* This instance is not set for torch mode so bail out */
+ if (pdata->mode != TPS6105X_MODE_TORCH) {
+ dev_info(&pdev->dev,
+ "chip not in torch mode, exit probe");
+ return -EINVAL;
+ }
+
+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+ /* fwnode/devicetree is optional. NULL is allowed for priv->fwnode */
+ priv->fwnode = device_get_next_child_node(pdev->dev.parent, NULL);
+ ret = devm_add_action_or_reset(&pdev->dev, tps6105x_handle_put, priv);
+ if (ret)
+ return ret;
+ priv->regmap = tps6105x->regmap;
+ priv->cdev.brightness_set_blocking = tps6105x_brightness_set;
+ priv->cdev.max_brightness = 7;
+ init_data.devicename = "tps6105x";
+ init_data.default_label = ":torch";
+ init_data.fwnode = priv->fwnode;
+
+ ret = regmap_update_bits(tps6105x->regmap, TPS6105X_REG_0,
+ TPS6105X_REG0_MODE_MASK |
+ TPS6105X_REG0_TORCHC_MASK,
+ TPS6105X_REG0_MODE_TORCH <<
+ TPS6105X_REG0_MODE_SHIFT);
+ if (ret)
+ return ret;
+
+ return devm_led_classdev_register_ext(&pdev->dev, &priv->cdev,
+ &init_data);
+}
+
+static struct platform_driver led_driver = {
+ .probe = tps6105x_led_probe,
+ .driver = {
+ .name = "tps6105x-leds",
+ },
+};
+
+module_platform_driver(led_driver);
+
+MODULE_DESCRIPTION("TPS6105x LED driver");
+MODULE_AUTHOR("Sven Van Asbroeck <TheSven73@gmail.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/leds-bd2802.h b/include/linux/leds-bd2802.h
index dd93c8d787b4..ec577f5f8707 100644
--- a/include/linux/leds-bd2802.h
+++ b/include/linux/leds-bd2802.h
@@ -11,7 +11,6 @@
#define _LEDS_BD2802_H_
struct bd2802_led_platform_data{
- int reset_gpio;
u8 rgb_time;
};
diff --git a/include/linux/leds.h b/include/linux/leds.h
index 242258f7d837..75353e5f9d13 100644
--- a/include/linux/leds.h
+++ b/include/linux/leds.h
@@ -20,6 +20,7 @@
struct device;
struct led_pattern;
+struct device_node;
/*
* LED Core
*/
@@ -196,6 +197,11 @@ void devm_led_classdev_unregister(struct device *parent,
void led_classdev_suspend(struct led_classdev *led_cdev);
void led_classdev_resume(struct led_classdev *led_cdev);
+extern struct led_classdev *of_led_get(struct device_node *np, int index);
+extern void led_put(struct led_classdev *led_cdev);
+struct led_classdev *__must_check devm_of_led_get(struct device *dev,
+ int index);
+
/**
* led_blink_set - set blinking with software fallback
* @led_cdev: the LED to start blinking
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.