diff options
| -rw-r--r-- | Documentation/devicetree/bindings/net/nfc/nxp-nci.txt | 2 | ||||
| -rw-r--r-- | drivers/nfc/nxp-nci/i2c.c | 2 |
2 files changed, 2 insertions, 2 deletions
diff --git a/Documentation/devicetree/bindings/net/nfc/nxp-nci.txt b/Documentation/devicetree/bindings/net/nfc/nxp-nci.txt index cfaf88998918..cb2385c277d0 100644 --- a/Documentation/devicetree/bindings/net/nfc/nxp-nci.txt +++ b/Documentation/devicetree/bindings/net/nfc/nxp-nci.txt @@ -6,11 +6,11 @@ Required properties: - reg: address on the bus - interrupts: GPIO interrupt to which the chip is connected - enable-gpios: Output GPIO pin used for enabling/disabling the chip -- firmware-gpios: Output GPIO pin used to enter firmware download mode Optional SoC Specific Properties: - pinctrl-names: Contains only one value - "default". - pintctrl-0: Specifies the pin control groups used for this controller. +- firmware-gpios: Output GPIO pin used to enter firmware download mode Example (for ARM-based BeagleBone with NPC100 NFC controller on I2C2): diff --git a/drivers/nfc/nxp-nci/i2c.c b/drivers/nfc/nxp-nci/i2c.c index 9f60e4dc5a90..7e451c10985d 100644 --- a/drivers/nfc/nxp-nci/i2c.c +++ b/drivers/nfc/nxp-nci/i2c.c @@ -286,7 +286,7 @@ static int nxp_nci_i2c_probe(struct i2c_client *client, return PTR_ERR(phy->gpiod_en); } - phy->gpiod_fw = devm_gpiod_get(dev, "firmware", GPIOD_OUT_LOW); + phy->gpiod_fw = devm_gpiod_get_optional(dev, "firmware", GPIOD_OUT_LOW); if (IS_ERR(phy->gpiod_fw)) { nfc_err(dev, "Failed to get FW gpio\n"); return PTR_ERR(phy->gpiod_fw); |