diff options
| -rw-r--r-- | Documentation/devicetree/bindings/spi/spi-uniphier.txt | 14 | ||||
| -rw-r--r-- | drivers/spi/spi-mt65xx.c | 4 | ||||
| -rw-r--r-- | drivers/spi/spi-omap2-mcspi.c | 37 |
3 files changed, 35 insertions, 20 deletions
diff --git a/Documentation/devicetree/bindings/spi/spi-uniphier.txt b/Documentation/devicetree/bindings/spi/spi-uniphier.txt index 504a4ecfc7b1..b04e66a52de5 100644 --- a/Documentation/devicetree/bindings/spi/spi-uniphier.txt +++ b/Documentation/devicetree/bindings/spi/spi-uniphier.txt @@ -5,18 +5,20 @@ UniPhier SoCs have SCSSI which supports SPI single channel. Required properties: - compatible: should be "socionext,uniphier-scssi" - reg: address and length of the spi master registers - - #address-cells: must be <1>, see spi-bus.txt - - #size-cells: must be <0>, see spi-bus.txt - - clocks: A phandle to the clock for the device. - - resets: A phandle to the reset control for the device. + - interrupts: a single interrupt specifier + - pinctrl-names: should be "default" + - pinctrl-0: pin control state for the default mode + - clocks: a phandle to the clock for the device + - resets: a phandle to the reset control for the device Example: spi0: spi@54006000 { compatible = "socionext,uniphier-scssi"; reg = <0x54006000 0x100>; - #address-cells = <1>; - #size-cells = <0>; + interrupts = <0 39 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi0>; clocks = <&peri_clk 11>; resets = <&peri_rst 11>; }; diff --git a/drivers/spi/spi-mt65xx.c b/drivers/spi/spi-mt65xx.c index 3dc31627c655..0c2867deb36f 100644 --- a/drivers/spi/spi-mt65xx.c +++ b/drivers/spi/spi-mt65xx.c @@ -522,11 +522,11 @@ static irqreturn_t mtk_spi_interrupt(int irq, void *dev_id) mdata->xfer_len = min(MTK_SPI_MAX_FIFO_SIZE, len); mtk_spi_setup_packet(master); - cnt = len / 4; + cnt = mdata->xfer_len / 4; iowrite32_rep(mdata->base + SPI_TX_DATA_REG, trans->tx_buf + mdata->num_xfered, cnt); - remainder = len % 4; + remainder = mdata->xfer_len % 4; if (remainder > 0) { reg_val = 0; memcpy(®_val, diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c index f024c3fc3679..2fd8881fcd65 100644 --- a/drivers/spi/spi-omap2-mcspi.c +++ b/drivers/spi/spi-omap2-mcspi.c @@ -1540,13 +1540,26 @@ static int omap2_mcspi_remove(struct platform_device *pdev) /* work with hotplug and coldplug */ MODULE_ALIAS("platform:omap2_mcspi"); -#ifdef CONFIG_SUSPEND -static int omap2_mcspi_suspend_noirq(struct device *dev) +static int __maybe_unused omap2_mcspi_suspend(struct device *dev) { - return pinctrl_pm_select_sleep_state(dev); + struct spi_master *master = dev_get_drvdata(dev); + struct omap2_mcspi *mcspi = spi_master_get_devdata(master); + int error; + + error = pinctrl_pm_select_sleep_state(dev); + if (error) + dev_warn(mcspi->dev, "%s: failed to set pins: %i\n", + __func__, error); + + error = spi_master_suspend(master); + if (error) + dev_warn(mcspi->dev, "%s: master suspend failed: %i\n", + __func__, error); + + return pm_runtime_force_suspend(dev); } -static int omap2_mcspi_resume_noirq(struct device *dev) +static int __maybe_unused omap2_mcspi_resume(struct device *dev) { struct spi_master *master = dev_get_drvdata(dev); struct omap2_mcspi *mcspi = spi_master_get_devdata(master); @@ -1557,17 +1570,17 @@ static int omap2_mcspi_resume_noirq(struct device *dev) dev_warn(mcspi->dev, "%s: failed to set pins: %i\n", __func__, error); - return 0; -} + error = spi_master_resume(master); + if (error) + dev_warn(mcspi->dev, "%s: master resume failed: %i\n", + __func__, error); -#else -#define omap2_mcspi_suspend_noirq NULL -#define omap2_mcspi_resume_noirq NULL -#endif + return pm_runtime_force_resume(dev); +} static const struct dev_pm_ops omap2_mcspi_pm_ops = { - .suspend_noirq = omap2_mcspi_suspend_noirq, - .resume_noirq = omap2_mcspi_resume_noirq, + SET_SYSTEM_SLEEP_PM_OPS(omap2_mcspi_suspend, + omap2_mcspi_resume) .runtime_resume = omap_mcspi_runtime_resume, }; |