aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--arch/arm/mach-imx/mach-mx21ads.c13
-rw-r--r--arch/arm/mach-imx/mach-mx27ads.c12
-rw-r--r--arch/arm/mach-mmp/brownstone.c12
-rw-r--r--arch/arm/mach-omap1/board-ams-delta.c14
-rw-r--r--arch/arm/mach-omap2/pdata-quirks.c16
-rw-r--r--arch/arm/mach-pxa/em-x270.c1
-rw-r--r--arch/arm/mach-pxa/ezx.c33
-rw-r--r--arch/arm/mach-pxa/magician.c2
-rw-r--r--arch/arm/mach-pxa/raumfeld.c12
-rw-r--r--arch/arm/mach-pxa/zeus.c23
-rw-r--r--arch/arm/mach-s3c64xx/mach-crag6410.c1
-rw-r--r--arch/arm/mach-s3c64xx/mach-smdk6410.c1
-rw-r--r--arch/arm/mach-sa1100/assabet.c21
-rw-r--r--arch/arm/mach-sa1100/generic.c5
-rw-r--r--arch/arm/mach-sa1100/generic.h3
-rw-r--r--arch/arm/mach-sa1100/shannon.c4
-rw-r--r--arch/sh/boards/mach-ecovec24/setup.c22
-rw-r--r--arch/x86/platform/intel-mid/device_libs/platform_bcm43xx.c17
-rw-r--r--drivers/regulator/fixed-helper.c1
-rw-r--r--drivers/regulator/fixed.c33
-rw-r--r--include/linux/regulator/fixed.h3
21 files changed, 187 insertions, 62 deletions
diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c
index 5e366824814f..5d3b6b4fe6db 100644
--- a/arch/arm/mach-imx/mach-mx21ads.c
+++ b/arch/arm/mach-imx/mach-mx21ads.c
@@ -18,6 +18,7 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/physmap.h>
#include <linux/gpio/driver.h>
+#include <linux/gpio/machine.h>
#include <linux/gpio.h>
#include <linux/regulator/fixed.h>
#include <linux/regulator/machine.h>
@@ -175,6 +176,7 @@ static struct resource mx21ads_mmgpio_resource =
DEFINE_RES_MEM_NAMED(MX21ADS_IO_REG, SZ_2, "dat");
static struct bgpio_pdata mx21ads_mmgpio_pdata = {
+ .label = "mx21ads-mmgpio",
.base = MX21ADS_MMGPIO_BASE,
.ngpio = 16,
};
@@ -203,7 +205,6 @@ static struct regulator_init_data mx21ads_lcd_regulator_init_data = {
static struct fixed_voltage_config mx21ads_lcd_regulator_pdata = {
.supply_name = "LCD",
.microvolts = 3300000,
- .gpio = MX21ADS_IO_LCDON,
.enable_high = 1,
.init_data = &mx21ads_lcd_regulator_init_data,
};
@@ -216,6 +217,15 @@ static struct platform_device mx21ads_lcd_regulator = {
},
};
+static struct gpiod_lookup_table mx21ads_lcd_regulator_gpiod_table = {
+ .dev_id = "reg-fixed-voltage.0", /* Let's hope ID 0 is what we get */
+ .table = {
+ GPIO_LOOKUP("mx21ads-mmgpio", 9,
+ "enable", GPIO_ACTIVE_HIGH),
+ { },
+ },
+};
+
/*
* Connected is a portrait Sharp-QVGA display
* of type: LQ035Q7DB02
@@ -311,6 +321,7 @@ static void __init mx21ads_late_init(void)
{
imx21_add_mxc_mmc(0, &mx21ads_sdhc_pdata);
+ gpiod_add_lookup_table(&mx21ads_lcd_regulator_gpiod_table);
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
mx21ads_cs8900_resources[1].start =
diff --git a/arch/arm/mach-imx/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c
index a04bb094ded1..0fdb88db0cbd 100644
--- a/arch/arm/mach-imx/mach-mx27ads.c
+++ b/arch/arm/mach-imx/mach-mx27ads.c
@@ -16,6 +16,7 @@
#include <linux/gpio/driver.h>
/* Needed for gpio_to_irq() */
#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/map.h>
@@ -230,10 +231,17 @@ static struct regulator_init_data mx27ads_lcd_regulator_init_data = {
static struct fixed_voltage_config mx27ads_lcd_regulator_pdata = {
.supply_name = "LCD",
.microvolts = 3300000,
- .gpio = MX27ADS_LCD_GPIO,
.init_data = &mx27ads_lcd_regulator_init_data,
};
+static struct gpiod_lookup_table mx27ads_lcd_regulator_gpiod_table = {
+ .dev_id = "reg-fixed-voltage.0", /* Let's hope ID 0 is what we get */
+ .table = {
+ GPIO_LOOKUP("LCD", 0, "enable", GPIO_ACTIVE_HIGH),
+ { },
+ },
+};
+
static void __init mx27ads_regulator_init(void)
{
struct gpio_chip *vchip;
@@ -247,6 +255,8 @@ static void __init mx27ads_regulator_init(void)
vchip->set = vgpio_set;
gpiochip_add_data(vchip, NULL);
+ gpiod_add_lookup_table(&mx27ads_lcd_regulator_gpiod_table);
+
platform_device_register_data(NULL, "reg-fixed-voltage",
PLATFORM_DEVID_AUTO,
&mx27ads_lcd_regulator_pdata,
diff --git a/arch/arm/mach-mmp/brownstone.c b/arch/arm/mach-mmp/brownstone.c
index d1613b954926..563b5a278d65 100644
--- a/arch/arm/mach-mmp/brownstone.c
+++ b/arch/arm/mach-mmp/brownstone.c
@@ -15,6 +15,7 @@
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/gpio-pxa.h>
+#include <linux/gpio/machine.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/max8649.h>
#include <linux/regulator/fixed.h>
@@ -148,7 +149,6 @@ static struct regulator_init_data brownstone_v_5vp_data = {
static struct fixed_voltage_config brownstone_v_5vp = {
.supply_name = "v_5vp",
.microvolts = 5000000,
- .gpio = GPIO_5V_ENABLE,
.enable_high = 1,
.enabled_at_boot = 1,
.init_data = &brownstone_v_5vp_data,
@@ -162,6 +162,15 @@ static struct platform_device brownstone_v_5vp_device = {
},
};
+static struct gpiod_lookup_table brownstone_v_5vp_gpiod_table = {
+ .dev_id = "reg-fixed-voltage.1", /* .id set to 1 above */
+ .table = {
+ GPIO_LOOKUP("gpio-pxa", GPIO_5V_ENABLE,
+ "enable", GPIO_ACTIVE_HIGH),
+ { },
+ },
+};
+
static struct max8925_platform_data brownstone_max8925_info = {
.irq_base = MMP_NR_IRQS,
};
@@ -217,6 +226,7 @@ static void __init brownstone_init(void)
mmp2_add_isram(&mmp2_isram_platdata);
/* enable 5v regulator */
+ gpiod_add_lookup_table(&brownstone_v_5vp_gpiod_table);
platform_device_register(&brownstone_v_5vp_device);
}
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index 52e8e53ca154..759fa18f6ab4 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -12,6 +12,7 @@
* published by the Free Software Foundation.
*/
#include <linux/gpio/driver.h>
+#include <linux/gpio/machine.h>
#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
@@ -203,6 +204,7 @@ static struct resource latch2_resources[] = {
};
static struct bgpio_pdata latch2_pdata = {
+ .label = "ams-delta-latch2",
.base = AMS_DELTA_LATCH2_GPIO_BASE,
.ngpio = AMS_DELTA_LATCH2_NGPIO,
};
@@ -272,7 +274,6 @@ static struct regulator_init_data modem_nreset_data = {
static struct fixed_voltage_config modem_nreset_config = {
.supply_name = "modem_nreset",
.microvolts = 3300000,
- .gpio = AMS_DELTA_GPIO_PIN_MODEM_NRESET,
.startup_delay = 25000,
.enable_high = 1,
.enabled_at_boot = 1,
@@ -287,6 +288,16 @@ static struct platform_device modem_nreset_device = {
},
};
+static struct gpiod_lookup_table modem_nreset_gpiod_table = {
+ .dev_id = "reg-fixed-voltage",
+ .table = {
+ /* The AMS_DELTA_GPIO_PIN_MODEM_NRESET is at offset 12 */
+ GPIO_LOOKUP("ams-delta-latch2", 12,
+ "enable", GPIO_ACTIVE_HIGH),
+ { },
+ },
+};
+
struct modem_private_data {
struct regulator *regulator;
};
@@ -570,6 +581,7 @@ static int __init late_init(void)
platform_add_devices(late_devices, ARRAY_SIZE(late_devices));
+ gpiod_add_lookup_table(&modem_nreset_gpiod_table);
err = platform_device_register(&modem_nreset_device);
if (err) {
pr_err("Couldn't register the modem regulator device\n");
diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c
index 6459816c2879..7d1447204fb8 100644
--- a/arch/arm/mach-omap2/pdata-quirks.c
+++ b/arch/arm/mach-omap2/pdata-quirks.c
@@ -10,6 +10,7 @@
#include <linux/clk.h>
#include <linux/davinci_emac.h>
#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/of_platform.h>
@@ -330,7 +331,6 @@ static struct regulator_init_data pandora_vmmc3 = {
static struct fixed_voltage_config pandora_vwlan = {
.supply_name = "vwlan",
.microvolts = 1800000, /* 1.8V */
- .gpio = PANDORA_WIFI_NRESET_GPIO,
.startup_delay = 50000, /* 50ms */
.enable_high = 1,
.init_data = &pandora_vmmc3,
@@ -344,6 +344,19 @@ static struct platform_device pandora_vwlan_device = {
},
};
+static struct gpiod_lookup_table pandora_vwlan_gpiod_table = {
+ .dev_id = "reg-fixed-voltage.1",
+ .table = {
+ /*
+ * As this is a low GPIO number it should be at the first
+ * GPIO bank.
+ */
+ GPIO_LOOKUP("gpio-0-31", PANDORA_WIFI_NRESET_GPIO,
+ "enable", GPIO_ACTIVE_HIGH),
+ { },
+ },
+};
+
static void pandora_wl1251_init_card(struct mmc_card *card)
{
/*
@@ -405,6 +418,7 @@ fail:
static void __init omap3_pandora_legacy_init(void)
{
platform_device_register(&pandora_backlight);
+ gpiod_add_lookup_table(&pandora_vwlan_gpiod_table);
platform_device_register(&pandora_vwlan_device);
omap_hsmmc_init(pandora_mmc3);
omap_hsmmc_late_init(pandora_mmc3);
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index 49022ad338e9..6d7d93981098 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -987,7 +987,6 @@ static struct fixed_voltage_config camera_dummy_config = {
.supply_name = "camera_vdd",
.input_supply = "vcc cam",
.microvolts = 2800000,
- .gpio = -1,
.enable_high = 0,
.init_data = &camera_dummy_initdata,
};
diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c
index 2c90b58f347d..2b4bd6d94855 100644
--- a/arch/arm/mach-pxa/ezx.c
+++ b/arch/arm/mach-pxa/ezx.c
@@ -21,6 +21,7 @@
#include <linux/regulator/fixed.h>
#include <linux/input.h>
#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
#include <linux/gpio_keys.h>
#include <linux/leds-lp3944.h>
#include <linux/platform_data/i2c-pxa.h>
@@ -698,31 +699,39 @@ static struct pxa27x_keypad_platform_data e2_keypad_platform_data = {
#if defined(CONFIG_MACH_EZX_A780) || defined(CONFIG_MACH_EZX_A910)
/* camera */
-static struct regulator_consumer_supply camera_dummy_supplies[] = {
+static struct regulator_consumer_supply camera_regulator_supplies[] = {
REGULATOR_SUPPLY("vdd", "0-005d"),
};
-static struct regulator_init_data camera_dummy_initdata = {
- .consumer_supplies = camera_dummy_supplies,
- .num_consumer_supplies = ARRAY_SIZE(camera_dummy_supplies),
+static struct regulator_init_data camera_regulator_initdata = {
+ .consumer_supplies = camera_regulator_supplies,
+ .num_consumer_supplies = ARRAY_SIZE(camera_regulator_supplies),
.constraints = {
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
},
};
-static struct fixed_voltage_config camera_dummy_config = {
+static struct fixed_voltage_config camera_regulator_config = {
.supply_name = "camera_vdd",
.microvolts = 2800000,
- .gpio = GPIO50_nCAM_EN,
.enable_high = 0,
- .init_data = &camera_dummy_initdata,
+ .init_data = &camera_regulator_initdata,
};
-static struct platform_device camera_supply_dummy_device = {
+static struct platform_device camera_supply_regulator_device = {
.name = "reg-fixed-voltage",
.id = 1,
.dev = {
- .platform_data = &camera_dummy_config,
+ .platform_data = &camera_regulator_config,
+ },
+};
+
+static struct gpiod_lookup_table camera_supply_gpiod_table = {
+ .dev_id = "reg-fixed-voltage.1",
+ .table = {
+ GPIO_LOOKUP("gpio-pxa", GPIO50_nCAM_EN,
+ "enable", GPIO_ACTIVE_HIGH),
+ { },
},
};
#endif
@@ -800,7 +809,7 @@ static struct i2c_board_info a780_i2c_board_info[] = {
static struct platform_device *a780_devices[] __initdata = {
&a780_gpio_keys,
- &camera_supply_dummy_device,
+ &camera_supply_regulator_device,
};
static void __init a780_init(void)
@@ -823,6 +832,7 @@ static void __init a780_init(void)
if (a780_camera_init() == 0)
pxa_set_camera_info(&a780_pxacamera_platform_data);
+ gpiod_add_lookup_table(&camera_supply_gpiod_table);
pwm_add_table(ezx_pwm_lookup, ARRAY_SIZE(ezx_pwm_lookup));
platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
platform_add_devices(ARRAY_AND_SIZE(a780_devices));
@@ -892,6 +902,7 @@ static void __init e680_init(void)
pxa_set_keypad_info(&e680_keypad_platform_data);
+ gpiod_add_lookup_table(&camera_supply_gpiod_table);
pwm_add_table(ezx_pwm_lookup, ARRAY_SIZE(ezx_pwm_lookup));
platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
platform_add_devices(ARRAY_AND_SIZE(e680_devices));
@@ -1098,7 +1109,7 @@ static struct i2c_board_info __initdata a910_i2c_board_info[] = {
static struct platform_device *a910_devices[] __initdata = {
&a910_gpio_keys,
- &camera_supply_dummy_device,
+ &camera_supply_regulator_device,
};
static void __init a910_init(void)
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index c5325d1ae77b..14c0f80bc9e7 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -18,6 +18,7 @@
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
#include <linux/gpio_keys.h>
#include <linux/input.h>
#include <linux/mfd/htc-pasic3.h>
@@ -696,7 +697,6 @@ static struct regulator_init_data vads7846_regulator = {
static struct fixed_voltage_config vads7846 = {
.supply_name = "vads7846",
.microvolts = 3300000, /* probably */
- .gpio = -EINVAL,
.startup_delay = 0,
.init_data = &vads7846_regulator,
};
diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c
index 034345546f84..ee766e4ebddc 100644
--- a/arch/arm/mach-pxa/raumfeld.c
+++ b/arch/arm/mach-pxa/raumfeld.c
@@ -886,7 +886,6 @@ static struct regulator_init_data audio_va_initdata = {
static struct fixed_voltage_config audio_va_config = {
.supply_name = "audio_va",
.microvolts = 5000000,
- .gpio = GPIO_AUDIO_VA_ENABLE,
.enable_high = 1,
.enabled_at_boot = 0,
.init_data = &audio_va_initdata,
@@ -900,6 +899,15 @@ static struct platform_device audio_va_device = {
},
};
+static struct gpiod_lookup_table audio_va_gpiod_table = {
+ .dev_id = "reg-fixed-voltage.0",
+ .table = {
+ GPIO_LOOKUP("gpio-pxa", GPIO_AUDIO_VA_ENABLE,
+ "enable", GPIO_ACTIVE_HIGH),
+ { },
+ },
+};
+
/* Dummy supplies for Codec's VD/VLC */
static struct regulator_consumer_supply audio_dummy_supplies[] = {
@@ -918,7 +926,6 @@ static struct regulator_init_data audio_dummy_initdata = {
static struct fixed_voltage_config audio_dummy_config = {
.supply_name = "audio_vd",
.microvolts = 3300000,
- .gpio = -1,
.init_data = &audio_dummy_initdata,
};
@@ -1033,6 +1040,7 @@ static void __init raumfeld_audio_init(void)
else
gpio_direction_output(GPIO_MCLK_RESET, 1);
+ gpiod_add_lookup_table(&audio_va_gpiod_table);
platform_add_devices(ARRAY_AND_SIZE(audio_regulator_devices));
}
diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c
index e3851795d6d7..58e05afcece0 100644
--- a/arch/arm/mach-pxa/zeus.c
+++ b/arch/arm/mach-pxa/zeus.c
@@ -17,6 +17,7 @@
#include <linux/irq.h>
#include <linux/pm.h>
#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
#include <linux/serial_8250.h>
#include <linux/dm9000.h>
#include <linux/mmc/host.h>
@@ -410,7 +411,6 @@ static struct regulator_init_data can_regulator_init_data = {
static struct fixed_voltage_config can_regulator_pdata = {
.supply_name = "CAN_SHDN",
.microvolts = 3300000,
- .gpio = ZEUS_CAN_SHDN_GPIO,
.init_data = &can_regulator_init_data,
};
@@ -422,6 +422,15 @@ static struct platform_device can_regulator_device = {
},
};
+static struct gpiod_lookup_table can_regulator_gpiod_table = {
+ .dev_id = "reg-fixed-voltage.0",
+ .table = {
+ GPIO_LOOKUP("gpio-pxa", ZEUS_CAN_SHDN_GPIO,
+ "enable", GPIO_ACTIVE_HIGH),
+ { },
+ },
+};
+
static struct mcp251x_platform_data zeus_mcp2515_pdata = {
.oscillator_frequency = 16*1000*1000,
};
@@ -538,7 +547,6 @@ static struct regulator_init_data zeus_ohci_regulator_data = {
static struct fixed_voltage_config zeus_ohci_regulator_config = {
.supply_name = "vbus2",
.microvolts = 5000000, /* 5.0V */
- .gpio = ZEUS_USB2_PWREN_GPIO,
.enable_high = 1,
.startup_delay = 0,
.init_data = &zeus_ohci_regulator_data,
@@ -552,6 +560,15 @@ static struct platform_device zeus_ohci_regulator_device = {
},
};
+static struct gpiod_lookup_table zeus_ohci_regulator_gpiod_table = {
+ .dev_id = "reg-fixed-voltage.0",
+ .table = {
+ GPIO_LOOKUP("gpio-pxa", ZEUS_USB2_PWREN_GPIO,
+ "enable", GPIO_ACTIVE_HIGH),
+ { },
+ },
+};
+
static struct pxaohci_platform_data zeus_ohci_platform_data = {
.port_mode = PMM_NPS_MODE,
/* Clear Power Control Polarity Low and set Power Sense
@@ -855,6 +872,8 @@ static void __init zeus_init(void)
pxa2xx_mfp_config(ARRAY_AND_SIZE(zeus_pin_config));
+ gpiod_add_lookup_table(&can_regulator_gpiod_table);
+ gpiod_add_lookup_table(&zeus_ohci_regulator_gpiod_table);
platform_add_devices(zeus_devices, ARRAY_SIZE(zeus_devices));
zeus_register_ohci();
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c
index f04650297487..379424d72ae7 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410.c
@@ -352,7 +352,6 @@ static struct fixed_voltage_config wallvdd_pdata = {
.supply_name = "WALLVDD",
.microvolts = 5000000,
.init_data = &wallvdd_data,
- .gpio = -EINVAL,
};
static struct platform_device wallvdd_device = {
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c
index c46fa5dfd2e0..908e5aa831c8 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6410.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c
@@ -222,7 +222,6 @@ static struct fixed_voltage_config smdk6410_b_pwr_5v_pdata = {
.supply_name = "B_PWR_5V",
.microvolts = 5000000,
.init_data = &smdk6410_b_pwr_5v_data,
- .gpio = -EINVAL,
};
static struct platform_device smdk6410_b_pwr_5v = {
diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c
index 575ec085cffa..dbb53c520165 100644
--- a/arch/arm/mach-sa1100/assabet.c
+++ b/arch/arm/mach-sa1100/assabet.c
@@ -101,7 +101,7 @@ static int __init assabet_init_gpio(void __iomem *reg, u32 def_val)
assabet_bcr_gc = gc;
- return gc->base;
+ return 0;
}
/*
@@ -471,6 +471,14 @@ static struct fixed_voltage_config assabet_cf_vcc_pdata __initdata = {
.enable_high = 1,
};
+static struct gpiod_lookup_table assabet_cf_vcc_gpio_table = {
+ .dev_id = "reg-fixed-voltage.0",
+ .table = {
+ GPIO_LOOKUP("assabet", 0, "enable", GPIO_ACTIVE_HIGH),
+ { },
+ },
+};
+
static void __init assabet_init(void)
{
/*
@@ -517,9 +525,11 @@ static void __init assabet_init(void)
neponset_resources, ARRAY_SIZE(neponset_resources));
#endif
} else {
+ gpiod_add_lookup_table(&assabet_cf_vcc_gpio_table);
sa11x0_register_fixed_regulator(0, &assabet_cf_vcc_pdata,
- assabet_cf_vcc_consumers,
- ARRAY_SIZE(assabet_cf_vcc_consumers));
+ assabet_cf_vcc_consumers,
+ ARRAY_SIZE(assabet_cf_vcc_consumers),
+ true);
}
@@ -802,7 +812,6 @@ fs_initcall(assabet_leds_init);
void __init assabet_init_irq(void)
{
- unsigned int assabet_gpio_base;
u32 def_val;
sa1100_init_irq();
@@ -817,9 +826,7 @@ void __init assabet_init_irq(void)
*
* This must precede any driver calls to BCR_set() or BCR_clear().
*/
- assabet_gpio_base = assabet_init_gpio((void *)&ASSABET_BCR, def_val);
-
- assabet_cf_vcc_pdata.gpio = assabet_gpio_base + 0;
+ assabet_init_gpio((void *)&ASSABET_BCR, def_val);
}
MACHINE_START(ASSABET, "Intel-Assabet")
diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c
index 7167ddf84a0e..800321c6cbd8 100644
--- a/arch/arm/mach-sa1100/generic.c
+++ b/arch/arm/mach-sa1100/generic.c
@@ -348,7 +348,8 @@ void __init sa11x0_init_late(void)
int __init sa11x0_register_fixed_regulator(int n,
struct fixed_voltage_config *cfg,
- struct regulator_consumer_supply *supplies, unsigned num_supplies)
+ struct regulator_consumer_supply *supplies, unsigned num_supplies,
+ bool uses_gpio)
{
struct regulator_init_data *id;
@@ -356,7 +357,7 @@ int __init sa11x0_register_fixed_regulator(int n,
if (!cfg->init_data)
return -ENOMEM;
- if (cfg->gpio < 0)
+ if (!uses_gpio)
id->constraints.always_on = 1;
id->constraints.name = cfg->supply_name;
id->constraints.min_uV = cfg->microvolts;
diff --git a/arch/arm/mach-sa1100/generic.h b/arch/arm/mach-sa1100/generic.h
index 5f3cb52fa6ab..158a4fd5ca24 100644
--- a/arch/arm/mach-sa1100/generic.h
+++ b/arch/arm/mach-sa1100/generic.h
@@ -54,4 +54,5 @@ void sa11x0_register_pcmcia(int socket, struct gpiod_lookup_table *);
struct fixed_voltage_config;
struct regulator_consumer_supply;
int sa11x0_register_fixed_regulator(int n, struct fixed_voltage_config *cfg,
- struct regulator_consumer_supply *supplies, unsigned num_supplies);
+ struct regulator_consumer_supply *supplies, unsigned num_supplies,
+ bool uses_gpio);
diff --git a/arch/arm/mach-sa1100/shannon.c b/arch/arm/mach-sa1100/shannon.c
index 22f7fe0b809f..5bc82e2671c6 100644
--- a/arch/arm/mach-sa1100/shannon.c
+++ b/arch/arm/mach-sa1100/shannon.c
@@ -102,14 +102,14 @@ static struct fixed_voltage_config shannon_cf_vcc_pdata __initdata = {
.supply_name = "cf-power",
.microvolts = 3300000,
.enabled_at_boot = 1,
- .gpio = -EINVAL,
};
static void __init shannon_init(void)
{
sa11x0_register_fixed_regulator(0, &shannon_cf_vcc_pdata,
shannon_cf_vcc_consumers,
- ARRAY_SIZE(shannon_cf_vcc_consumers));
+ ARRAY_SIZE(shannon_cf_vcc_consumers),
+ false);
sa11x0_register_pcmcia(0, &shannon_pcmcia0_gpio_table);
sa11x0_register_pcmcia(1, &shannon_pcmcia1_gpio_table);
sa11x0_ppc_configure_mcp();
diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
index adc61d14172c..c296b5c399b7 100644
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -633,7 +633,6 @@ static struct regulator_init_data cn12_power_init_data = {
static struct fixed_voltage_config cn12_power_info = {
.supply_name = "CN12 SD/MMC Vdd",
.microvolts = 3300000,
- .gpio = GPIO_PTB7,
.enable_high = 1,
.init_data = &cn12_power_init_data,
};
@@ -646,6 +645,16 @@ static struct platform_device cn12_power = {
},
};
+static struct gpiod_lookup_table cn12_power_gpiod_table = {
+ .dev_id = "reg-fixed-voltage.0",
+ .table = {
+ /* Offset 7 on port B */
+ GPIO_LOOKUP("sh7724_pfc", GPIO_PTB7,
+ "enable", GPIO_ACTIVE_HIGH),
+ { },
+ },
+};
+
#if defined(CONFIG_MMC_SDHI) || defined(CONFIG_MMC_SDHI_MODULE)
/* SDHI0 */
static struct regulator_consumer_supply sdhi0_power_consumers[] =
@@ -665,7 +674,6 @@ static struct regulator_init_data sdhi0_power_init_data = {
static struct fixed_voltage_config sdhi0_power_info = {
.supply_name = "CN11 SD/MMC Vdd",
.microvolts = 3300000,
- .gpio = GPIO_PTB6,
.enable_high = 1,
.init_data = &sdhi0_power_init_data,
};
@@ -678,6 +686,16 @@ static struct platform_device sdhi0_power = {
},
};
+static struct gpiod_lookup_table sdhi0_power_gpiod_table = {
+ .dev_id = "reg-fixed-voltage.1",
+ .table = {
+ /* Offset 6 on port B */
+ GPIO_LOOKUP("sh7724_pfc", GPIO_PTB6,
+ "enable", GPIO_ACTIVE_HIGH),
+ { },
+ },
+};
+
static struct tmio_mmc_data sdhi0_info = {
.chan_priv_tx = (void *)SHDMA_SLAVE_SDHI0_TX,
.chan_priv_rx = (void *)SHDMA_SLAVE_SDHI0_RX,
diff --git a/arch/x86/platform/intel-mid/device_libs/platform_bcm43xx.c b/arch/x86/platform/intel-mid/device_libs/platform_bcm43xx.c
index 4392c15ed9e0..fc77d69e51d7 100644
--- a/arch/x86/platform/intel-mid/device_libs/platform_bcm43xx.c
+++ b/arch/x86/platform/intel-mid/device_libs/platform_bcm43xx.c
@@ -10,7 +10,7 @@
* of the License.
*/
-#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
#include <linux/platform_device.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/fixed.h>
@@ -43,7 +43,6 @@ static struct fixed_voltage_config bcm43xx_vmmc = {
* real voltage and signaling are still 1.8V.
*/
.microvolts = 2000000, /* 1.8V */
- .gpio = -EINVAL,
.startup_delay = 250 * 1000, /* 250ms */
.enable_high = 1, /* active high */
.enabled_at_boot = 0, /* disabled at boot */
@@ -58,11 +57,23 @@ static struct platform_device bcm43xx_vmmc_regulator = {
},
};
+static struct gpiod_lookup_table bcm43xx_vmmc_gpio_table = {
+ .dev_id = "reg-fixed-voltage.0",
+ .table = {
+ GPIO_LOOKUP("0000:00:0c.0", -1, "enable", GPIO_ACTIVE_LOW),
+ {}
+ },
+};
+
static int __init bcm43xx_regulator_register(void)
{
+ struct gpiod_lookup_table *table = &bcm43xx_vmmc_gpio_table;
+ struct gpiod_lookup *lookup = table->table;
int ret;
- bcm43xx_vmmc.gpio = get_gpio_by_name(WLAN_SFI_GPIO_ENABLE_NAME);
+ lookup[0].chip_hwnum = get_gpio_by_name(WLAN_SFI_GPIO_ENABLE_NAME);
+ gpiod_add_lookup_table(table);
+
ret = platform_device_register(&bcm43xx_vmmc_regulator);
if (ret) {
pr_err("%s: vmmc regulator register failed\n", __func__);
diff --git a/drivers/regulator/fixed-helper.c b/drivers/regulator/fixed-helper.c
index 777fac6fb4cb..2c6098e6f4bc 100644
--- a/drivers/regulator/fixed-helper.c
+++ b/drivers/regulator/fixed-helper.c
@@ -43,7 +43,6 @@ struct platform_device *regulator_register_always_on(int id, const char *name,
}
data->cfg.microvolts = uv;
- data->cfg.gpio = -EINVAL;
data->cfg.enabled_at_boot = 1;
data->cfg.init_data = &data->init_data;
diff --git a/drivers/regulator/fixed.c b/drivers/regulator/fixed.c
index 988a7472c2ab..1142f195529b 100644
--- a/drivers/regulator/fixed.c
+++ b/drivers/regulator/fixed.c
@@ -24,10 +24,9 @@
#include <linux/platform_device.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/fixed.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/slab.h>
#include <linux/of.h>
-#include <linux/of_gpio.h>
#include <linux/regulator/of_regulator.h>
#include <linux/regulator/machine.h>
@@ -78,10 +77,6 @@ of_get_fixed_voltage_config(struct device *dev,
if (init_data->constraints.boot_on)
config->enabled_at_boot = true;
- config->gpio = of_get_named_gpio(np, "gpio", 0);
- if ((config->gpio < 0) && (config->gpio != -ENOENT))
- return ERR_PTR(config->gpio);
-
of_property_read_u32(np, "startup-delay-us", &config->startup_delay);
config->enable_high = of_property_read_bool(np, "enable-active-high");
@@ -102,6 +97,7 @@ static int reg_fixed_voltage_probe(struct platform_device *pdev)
struct fixed_voltage_config *config;
struct fixed_voltage_data *drvdata;
struct regulator_config cfg = { };
+ enum gpiod_flags gflags;
int ret;
drvdata = devm_kzalloc(&pdev->dev, sizeof(struct fixed_voltage_data),
@@ -150,25 +146,28 @@ static int reg_fixed_voltage_probe(struct platform_device *pdev)
drvdata->desc.fixed_uV = config->microvolts;
- if (gpio_is_valid(config->gpio)) {
- cfg.ena_gpio = config->gpio;
- if (pdev->dev.of_node)
- cfg.ena_gpio_initialized = true;
- }
cfg.ena_gpio_invert = !config->enable_high;
if (config->enabled_at_boot) {
if (config->enable_high)
- cfg.ena_gpio_flags |= GPIOF_OUT_INIT_HIGH;
+ gflags = GPIOD_OUT_HIGH;
else
- cfg.ena_gpio_flags |= GPIOF_OUT_INIT_LOW;
+ gflags = GPIOD_OUT_LOW;
} else {
if (config->enable_high)
- cfg.ena_gpio_flags |= GPIOF_OUT_INIT_LOW;
+ gflags = GPIOD_OUT_LOW;
else
- cfg.ena_gpio_flags |= GPIOF_OUT_INIT_HIGH;
+ gflags = GPIOD_OUT_HIGH;
}
- if (config->gpio_is_open_drain)
- cfg.ena_gpio_flags |= GPIOF_OPEN_DRAIN;
+ if (config->gpio_is_open_drain) {
+ if (gflags == GPIOD_OUT_HIGH)
+ gflags = GPIOD_OUT_HIGH_OPEN_DRAIN;
+ else
+ gflags = GPIOD_OUT_LOW_OPEN_DRAIN;
+ }
+
+ cfg.ena_gpiod = devm_gpiod_get_optional(&pdev->dev, NULL, gflags);
+ if (IS_ERR(cfg.ena_gpiod))
+ return PTR_ERR(cfg.ena_gpiod);
cfg.dev = &pdev->dev;
cfg.init_data = config->init_data;
diff --git a/include/linux/regulator/fixed.h b/include/linux/regulator/fixed.h
index 48918be649d4..1a4340ed8e2b 100644
--- a/include/linux/regulator/fixed.h
+++ b/include/linux/regulator/fixed.h
@@ -24,8 +24,6 @@ struct regulator_init_data;
* @supply_name: Name of the regulator supply
* @input_supply: Name of the input regulator supply
* @microvolts: Output voltage of regulator
- * @gpio: GPIO to use for enable control
- * set to -EINVAL if not used
* @startup_delay: Start-up time in microseconds
* @gpio_is_open_drain: Gpio pin is open drain or normal type.
* If it is open drain type then HIGH will be set
@@ -49,7 +47,6 @@ struct fixed_voltage_config {
const char *supply_name;
const char *input_supply;
int microvolts;
- int gpio;
unsigned startup_delay;
unsigned gpio_is_open_drain:1;
unsigned enable_high:1;
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.