diff options
578 files changed, 32659 insertions, 30108 deletions
diff --git a/include/linux/Kbuild b/include/linux/Kbuild index e2a1346514a6..5b57367e28db 100644 --- a/include/linux/Kbuild +++ b/include/linux/Kbuild @@ -22,389 +22,10 @@ header-y += wimax/ ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/a.out.h \ $(srctree)/arch/$(SRCARCH)/include/uapi/asm/a.out.h),) -header-y += a.out.h endif ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/kvm.h \ $(srctree)/arch/$(SRCARCH)/include/uapi/asm/kvm.h),) -header-y += kvm.h endif ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/kvm_para.h \ $(srctree)/arch/$(SRCARCH)/include/uapi/asm/kvm_para.h),) -header-y += kvm_para.h endif - -header-y += acct.h -header-y += adb.h -header-y += adfs_fs.h -header-y += affs_hardblocks.h -header-y += agpgart.h -header-y += aio_abi.h -header-y += apm_bios.h -header-y += arcfb.h -header-y += atalk.h -header-y += atm.h -header-y += atm_eni.h -header-y += atm_he.h -header-y += atm_idt77105.h -header-y += atm_nicstar.h -header-y += atm_tcp.h -header-y += atm_zatm.h -header-y += atmapi.h -header-y += atmarp.h -header-y += atmbr2684.h -header-y += atmclip.h -header-y += atmdev.h -header-y += atmioc.h -header-y += atmlec.h -header-y += atmmpc.h -header-y += atmppp.h -header-y += atmsap.h -header-y += atmsvc.h -header-y += audit.h -header-y += auto_fs.h -header-y += auto_fs4.h -header-y += auxvec.h -header-y += ax25.h -header-y += b1lli.h -header-y += baycom.h -header-y += bfs_fs.h -header-y += binfmts.h -header-y += blkpg.h -header-y += blktrace_api.h -header-y += bpqether.h -header-y += bsg.h -header-y += can.h -header-y += capability.h -header-y += capi.h -header-y += cciss_defs.h -header-y += cciss_ioctl.h -header-y += cdrom.h -header-y += cgroupstats.h -header-y += chio.h -header-y += cm4000_cs.h -header-y += cn_proc.h -header-y += coda.h -header-y += coda_psdev.h -header-y += coff.h -header-y += connector.h -header-y += const.h -header-y += cramfs_fs.h -header-y += cuda.h -header-y += cyclades.h -header-y += cycx_cfm.h -header-y += dcbnl.h -header-y += dccp.h -header-y += dlm.h -header-y += dlm_device.h -header-y += dlm_netlink.h -header-y += dlm_plock.h -header-y += dlmconstants.h -header-y += dm-ioctl.h -header-y += dm-log-userspace.h -header-y += dn.h -header-y += dqblk_xfs.h -header-y += edd.h -header-y += efs_fs_sb.h -header-y += elf-em.h -header-y += elf-fdpic.h -header-y += elf.h -header-y += elfcore.h -header-y += errno.h -header-y += errqueue.h -header-y += ethtool.h -header-y += eventpoll.h -header-y += fadvise.h -header-y += falloc.h -header-y += fanotify.h -header-y += fb.h -header-y += fcntl.h -header-y += fd.h -header-y += fdreg.h -header-y += fib_rules.h -header-y += fiemap.h -header-y += filter.h -header-y += firewire-cdev.h -header-y += firewire-constants.h -header-y += flat.h -header-y += fs.h -header-y += fsl_hypervisor.h -header-y += fuse.h -header-y += futex.h -header-y += gameport.h -header-y += gen_stats.h -header-y += genetlink.h -header-y += gfs2_ondisk.h -header-y += gigaset_dev.h -header-y += hdlc.h -header-y += hdlcdrv.h -header-y += hdreg.h -header-y += hid.h -header-y += hiddev.h -header-y += hidraw.h -header-y += hpet.h -header-y += hysdn_if.h -header-y += i2c-dev.h -header-y += i2c.h -header-y += i2o-dev.h -header-y += i8k.h -header-y += icmp.h -header-y += icmpv6.h -header-y += if.h -header-y += if_addr.h -header-y += if_addrlabel.h -header-y += if_alg.h -header-y += if_arcnet.h -header-y += if_arp.h -header-y += if_bonding.h -header-y += if_bridge.h -header-y += if_cablemodem.h -header-y += if_eql.h -header-y += if_ether.h -header-y += if_fc.h -header-y += if_fddi.h -header-y += if_frad.h -header-y += if_hippi.h -header-y += if_infiniband.h -header-y += if_link.h -header-y += if_ltalk.h -header-y += if_packet.h -header-y += if_phonet.h -header-y += if_plip.h -header-y += if_ppp.h -header-y += if_pppol2tp.h -header-y += if_pppox.h -header-y += if_slip.h -header-y += if_team.h -header-y += if_tun.h -header-y += if_tunnel.h -header-y += if_vlan.h -header-y += if_x25.h -header-y += igmp.h -header-y += in.h -header-y += in6.h -header-y += in_route.h -header-y += sock_diag.h -header-y += inet_diag.h -header-y += unix_diag.h -header-y += packet_diag.h -header-y += inotify.h -header-y += input.h -header-y += ioctl.h -header-y += ip.h -header-y += ip6_tunnel.h -header-y += ip_vs.h -header-y += ipc.h -header-y += ipmi.h -header-y += ipmi_msgdefs.h -header-y += ipsec.h -header-y += ipv6.h -header-y += ipv6_route.h -header-y += ipx.h -header-y += irda.h -header-y += irqnr.h -header-y += isdn.h -header-y += isdn_divertif.h -header-y += isdn_ppp.h -header-y += isdnif.h -header-y += iso_fs.h -header-y += ivtv.h -header-y += ivtvfb.h -header-y += ixjuser.h -header-y += jffs2.h -header-y += joystick.h -header-y += kd.h -header-y += kdev_t.h -header-y += kernel.h -header-y += kernelcapi.h -header-y += kernel-page-flags.h -header-y += kexec.h -header-y += keyboard.h -header-y += keyctl.h -header-y += l2tp.h -header-y += limits.h -header-y += llc.h -header-y += loop.h -header-y += lp.h -header-y += magic.h -header-y += major.h -header-y += map_to_7segment.h -header-y += matroxfb.h -header-y += mdio.h -header-y += media.h -header-y += mei.h -header-y += mempolicy.h -header-y += meye.h -header-y += mii.h -header-y += minix_fs.h -header-y += mman.h -header-y += mmtimer.h -header-y += mqueue.h -header-y += mroute.h -header-y += mroute6.h -header-y += msdos_fs.h -header-y += msg.h -header-y += mtio.h -header-y += n_r3964.h -header-y += nbd.h -header-y += ncp.h -header-y += ncp_fs.h -header-y += ncp_mount.h -header-y += ncp_no.h -header-y += neighbour.h -header-y += net.h -header-y += net_dropmon.h -header-y += net_tstamp.h -header-y += netdevice.h -header-y += netfilter.h -header-y += netfilter_arp.h -header-y += netfilter_bridge.h -header-y += netfilter_decnet.h -header-y += netfilter_ipv4.h -header-y += netfilter_ipv6.h -header-y += netlink.h -header-y += netrom.h -header-y += nfc.h -header-y += nfs.h -header-y += nfs2.h -header-y += nfs3.h -header-y += nfs4.h -header-y += nfs4_mount.h -header-y += nfs_fs.h -header-y += nfs_idmap.h -header-y += nfs_mount.h -header-y += nfsacl.h -header-y += nl80211.h -header-y += nubus.h -header-y += nvram.h -header-y += omap3isp.h -header-y += omapfb.h -header-y += oom.h -header-y += param.h -header-y += parport.h -header-y += patchkey.h -header-y += pci.h -header-y += pci_regs.h -header-y += perf_event.h -header-y += personality.h -header-y += pfkeyv2.h -header-y += pg.h -header-y += phantom.h -header-y += phonet.h -header-y += pkt_cls.h -header-y += pkt_sched.h -header-y += pktcdvd.h -header-y += pmu.h -header-y += poll.h -header-y += posix_types.h -header-y += ppdev.h -header-y += ppp-comp.h -header-y += ppp-ioctl.h -header-y += ppp_defs.h -header-y += pps.h -header-y += prctl.h -header-y += ptp_clock.h -header-y += ptrace.h -header-y += qnx4_fs.h -header-y += qnxtypes.h -header-y += quota.h -header-y += radeonfb.h -header-y += random.h -header-y += raw.h -header-y += rds.h -header-y += reboot.h -header-y += reiserfs_fs.h -header-y += reiserfs_xattr.h -header-y += resource.h -header-y += rfkill.h -header-y += romfs_fs.h -header-y += rose.h -header-y += route.h -header-y += rtc.h -header-y += rtnetlink.h -header-y += scc.h -header-y += sched.h -header-y += screen_info.h -header-y += sdla.h -header-y += seccomp.h -header-y += securebits.h -header-y += selinux_netlink.h -header-y += sem.h -header-y += serial.h -header-y += serial_core.h -header-y += serial_reg.h -header-y += serio.h -header-y += shm.h -header-y += signal.h -header-y += signalfd.h -header-y += snmp.h -header-y += socket.h -header-y += sockios.h -header-y += som.h -header-y += sonet.h -header-y += sonypi.h -header-y += sound.h -header-y += soundcard.h -header-y += stat.h -header-y += stddef.h -header-y += string.h -header-y += suspend_ioctls.h -header-y += swab.h -header-y += synclink.h -header-y += sysctl.h -header-y += sysinfo.h -header-y += taskstats.h -header-y += tcp.h -header-y += tcp_metrics.h -header-y += telephony.h -header-y += termios.h -header-y += time.h -header-y += times.h -header-y += timex.h -header-y += tiocl.h -header-y += tipc.h -header-y += tipc_config.h -header-y += toshiba.h -header-y += tty.h -header-y += tty_flags.h -header-y += types.h -header-y += udf_fs_i.h -header-y += udp.h -header-y += uhid.h -header-y += uinput.h -header-y += uio.h -header-y += ultrasound.h -header-y += un.h -header-y += unistd.h -header-y += usbdevice_fs.h -header-y += utime.h -header-y += utsname.h -header-y += uuid.h -header-y += uvcvideo.h -header-y += v4l2-common.h -header-y += v4l2-controls.h -header-y += v4l2-dv-timings.h -header-y += v4l2-mediabus.h -header-y += v4l2-subdev.h -header-y += veth.h -header-y += vfio.h -header-y += vhost.h -header-y += videodev2.h -header-y += virtio_9p.h -header-y += virtio_balloon.h -header-y += virtio_blk.h -header-y += virtio_config.h -header-y += virtio_console.h -header-y += virtio_ids.h -header-y += virtio_net.h -header-y += virtio_pci.h -header-y += virtio_ring.h -header-y += virtio_rng.h -header-y += vt.h -header-y += wait.h -header-y += wanrouter.h -header-y += watchdog.h -header-y += wimax.h -header-y += wireless.h -header-y += x25.h -header-y += xattr.h -header-y += xfrm.h diff --git a/include/linux/a.out.h b/include/linux/a.out.h index e86dfca44589..220f14338895 100644 --- a/include/linux/a.out.h +++ b/include/linux/a.out.h @@ -1,278 +1,84 @@ #ifndef __A_OUT_GNU_H__ #define __A_OUT_GNU_H__ -#define __GNU_EXEC_MACROS__ - -#ifndef __STRUCT_EXEC_OVERRIDE__ - -#include <asm/a.out.h> - -#endif /* __STRUCT_EXEC_OVERRIDE__ */ +#include <uapi/linux/a.out.h> #ifndef __ASSEMBLY__ - -/* these go in the N_MACHTYPE field */ -enum machine_type { #if defined (M_OLDSUN2) - M__OLDSUN2 = M_OLDSUN2, #else - M_OLDSUN2 = 0, #endif #if defined (M_68010) - M__68010 = M_68010, #else - M_68010 = 1, #endif #if defined (M_68020) - M__68020 = M_68020, #else - M_68020 = 2, #endif #if defined (M_SPARC) - M__SPARC = M_SPARC, #else - M_SPARC = 3, #endif - /* skip a bunch so we don't run into any of sun's numbers */ - M_386 = 100, - M_MIPS1 = 151, /* MIPS R3000/R3000 binary */ - M_MIPS2 = 152 /* MIPS R6000/R4000 binary */ -}; - #if !defined (N_MAGIC) -#define N_MAGIC(exec) ((exec).a_info & 0xffff) #endif -#define N_MACHTYPE(exec) ((enum machine_type)(((exec).a_info >> 16) & 0xff)) -#define N_FLAGS(exec) (((exec).a_info >> 24) & 0xff) -#define N_SET_INFO(exec, magic, type, flags) \ - ((exec).a_info = ((magic) & 0xffff) \ - | (((int)(type) & 0xff) << 16) \ - | (((flags) & 0xff) << 24)) -#define N_SET_MAGIC(exec, magic) \ - ((exec).a_info = (((exec).a_info & 0xffff0000) | ((magic) & 0xffff))) - -#define N_SET_MACHTYPE(exec, machtype) \ - ((exec).a_info = \ - ((exec).a_info&0xff00ffff) | ((((int)(machtype))&0xff) << 16)) - -#define N_SET_FLAGS(exec, flags) \ - ((exec).a_info = \ - ((exec).a_info&0x00ffffff) | (((flags) & 0xff) << 24)) - -/* Code indicating object file or impure executable. */ -#define OMAGIC 0407 -/* Code indicating pure executable. */ -#define NMAGIC 0410 -/* Code indicating demand-paged executable. */ -#define ZMAGIC 0413 -/* This indicates a demand-paged executable with the header in the text. - The first page is unmapped to help trap NULL pointer references */ -#define QMAGIC 0314 - -/* Code indicating core file. */ -#define CMAGIC 0421 - #if !defined (N_BADMAG) -#define N_BADMAG(x) (N_MAGIC(x) != OMAGIC \ - && N_MAGIC(x) != NMAGIC \ - && N_MAGIC(x) != ZMAGIC \ - && N_MAGIC(x) != QMAGIC) #endif - -#define _N_HDROFF(x) (1024 - sizeof (struct exec)) - #if !defined (N_TXTOFF) -#define N_TXTOFF(x) \ - (N_MAGIC(x) == ZMAGIC ? _N_HDROFF((x)) + sizeof (struct exec) : \ - (N_MAGIC(x) == QMAGIC ? 0 : sizeof (struct exec))) #endif - #if !defined (N_DATOFF) -#define N_DATOFF(x) (N_TXTOFF(x) + (x).a_text) #endif - #if !defined (N_TRELOFF) -#define N_TRELOFF(x) (N_DATOFF(x) + (x).a_data) #endif - #if !defined (N_DRELOFF) -#define N_DRELOFF(x) (N_TRELOFF(x) + N_TRSIZE(x)) #endif - #if !defined (N_SYMOFF) -#define N_SYMOFF(x) (N_DRELOFF(x) + N_DRSIZE(x)) #endif - #if !defined (N_STROFF) -#define N_STROFF(x) (N_SYMOFF(x) + N_SYMSIZE(x)) #endif - -/* Address of text segment in memory after it is loaded. */ #if !defined (N_TXTADDR) -#define N_TXTADDR(x) (N_MAGIC(x) == QMAGIC ? PAGE_SIZE : 0) #endif - -/* Address of data segment in memory after it is loaded. - Note that it is up to you to define SEGMENT_SIZE - on machines not listed here. */ #if defined(vax) || defined(hp300) || defined(pyr) -#define SEGMENT_SIZE page_size #endif #ifdef sony -#define SEGMENT_SIZE 0x2000 #endif /* Sony. */ #ifdef is68k -#define SEGMENT_SIZE 0x20000 #endif #if defined(m68k) && defined(PORTAR) -#define PAGE_SIZE 0x400 -#define SEGMENT_SIZE PAGE_SIZE #endif - #ifdef linux -#ifdef __KERNEL__ #include <asm/page.h> -#else -#include <unistd.h> -#endif #if defined(__i386__) || defined(__mc68000__) -#define SEGMENT_SIZE 1024 #else #ifndef SEGMENT_SIZE -#ifdef __KERNEL__ #define SEGMENT_SIZE PAGE_SIZE -#else -#define SEGMENT_SIZE getpagesize() -#endif #endif #endif #endif - -#define _N_SEGMENT_ROUND(x) ALIGN(x, SEGMENT_SIZE) - -#define _N_TXTENDADDR(x) (N_TXTADDR(x)+(x).a_text) - #ifndef N_DATADDR -#define N_DATADDR(x) \ - (N_MAGIC(x)==OMAGIC? (_N_TXTENDADDR(x)) \ - : (_N_SEGMENT_ROUND (_N_TXTENDADDR(x)))) #endif - -/* Address of bss segment in memory after it is loaded. */ #if !defined (N_BSSADDR) -#define N_BSSADDR(x) (N_DATADDR(x) + (x).a_data) #endif - #if !defined (N_NLIST_DECLARED) -struct nlist { - union { - char *n_name; - struct nlist *n_next; - long n_strx; - } n_un; - unsigned char n_type; - char n_other; - short n_desc; - unsigned long n_value; -}; #endif /* no N_NLIST_DECLARED. */ - #if !defined (N_UNDF) -#define N_UNDF 0 #endif #if !defined (N_ABS) -#define N_ABS 2 #endif #if !defined (N_TEXT) -#define N_TEXT 4 #endif #if !defined (N_DATA) -#define N_DATA 6 #endif #if !defined (N_BSS) -#define N_BSS 8 #endif #if !defined (N_FN) -#define N_FN 15 #endif - #if !defined (N_EXT) -#define N_EXT 1 #endif #if !defined (N_TYPE) -#define N_TYPE 036 #endif #if !defined (N_STAB) -#define N_STAB 0340 #endif - -/* The following type indicates the definition of a symbol as being - an indirect reference to another symbol. The other symbol - appears as an undefined reference, immediately following this symbol. - - Indirection is asymmetrical. The other symbol's value will be used - to satisfy requests for the indirect symbol, but not vice versa. - If the other symbol does not have a definition, libraries will - be searched to find a definition. */ -#define N_INDR 0xa - -/* The following symbols refer to set elements. - All the N_SET[ATDB] symbols with the same name form one set. - Space is allocated for the set in the text section, and each set - element's value is stored into one word of the space. - The first word of the space is the length of the set (number of elements). - - The address of the set is made into an N_SETV symbol - whose name is the same as the name of the set. - This symbol acts like a N_DATA global symbol - in that it can satisfy undefined external references. */ - -/* These appear as input to LD, in a .o file. */ -#define N_SETA 0x14 /* Absolute set element symbol */ -#define N_SETT 0x16 /* Text set element symbol */ -#define N_SETD 0x18 /* Data set element symbol */ -#define N_SETB 0x1A /* Bss set element symbol */ - -/* This is output from LD. */ -#define N_SETV 0x1C /* Pointer to set vector in data area. */ - #if !defined (N_RELOCATION_INFO_DECLARED) -/* This structure describes a single relocation to be performed. - The text-relocation section of the file is a vector of these structures, - all of which apply to the text section. - Likewise, the data-relocation section applies to the data section. */ - -struct relocation_info -{ - /* Address (within segment) to be relocated. */ - int r_address; - /* The meaning of r_symbolnum depends on r_extern. */ - unsigned int r_symbolnum:24; - /* Nonzero means value is a pc-relative offset - and it should be relocated for changes in its own address - as well as for changes in the symbol or section specified. */ - unsigned int r_pcrel:1; - /* Length (as exponent of 2) of the field to be relocated. - Thus, a value of 2 indicates 1<<2 bytes. */ - unsigned int r_length:2; - /* 1 => relocate with value of symbol. - r_symbolnum is the index of the symbol - in file's the symbol table. - 0 => relocate with the address of a segment. - r_symbolnum is N_TEXT, N_DATA, N_BSS or N_ABS - (the N_EXT bit may be set also, but signifies nothing). */ - unsigned int r_extern:1; - /* Four bits that aren't used, but when writing an object file - it is desirable to clear them. */ #ifdef NS32K - unsigned r_bsr:1; - unsigned r_disp:1; - unsigned r_pad:2; #else - unsigned int r_pad:4; #endif -}; #endif /* no N_RELOCATION_INFO_DECLARED. */ - #endif /*__ASSEMBLY__ */ #endif /* __A_OUT_GNU_H__ */ diff --git a/include/linux/acct.h b/include/linux/acct.h index d537aa0ec414..4a5b7cb56079 100644 --- a/include/linux/acct.h +++ b/include/linux/acct.h @@ -11,109 +11,11 @@ * Copyright (C) 1995 - 1997 Marco van Wieringen - ELM Consultancy B.V. * */ - #ifndef _LINUX_ACCT_H #define _LINUX_ACCT_H -#include <linux/types.h> - -#include <asm/param.h> -#include <asm/byteorder.h> - -/* - * comp_t is a 16-bit "floating" point number with a 3-bit base 8 - * exponent and a 13-bit fraction. - * comp2_t is 24-bit with 5-bit base 2 exponent and 20 bit fraction - * (leading 1 not stored). - * See linux/kernel/acct.c for the specific encoding systems used. - */ - -typedef __u16 comp_t; -typedef __u32 comp2_t; - -/* - * accounting file record - * - * This structure contains all of the information written out to the - * process accounting file whenever a process exits. - */ +#include <uapi/linux/acct.h> -#define ACCT_COMM 16 - -struct acct -{ - char ac_flag; /* Flags */ - char ac_version; /* Always set to ACCT_VERSION */ - /* for binary compatibility back until 2.0 */ - __u16 ac_uid16; /* LSB of Real User ID */ - __u16 ac_gid16; /* LSB of Real Group ID */ - __u16 ac_tty; /* Control Terminal */ - __u32 ac_btime; /* Process Creation Time */ - comp_t ac_utime; /* User Time */ - comp_t ac_stime; /* System Time */ - comp_t ac_etime; /* Elapsed Time */ - comp_t ac_mem; /* Average Memory Usage */ - comp_t ac_io; /* Chars Transferred */ - comp_t ac_rw; /* Blocks Read or Written */ - comp_t ac_minflt; /* Minor Pagefaults */ - comp_t ac_majflt; /* Major Pagefaults */ - comp_t ac_swaps; /* Number of Swaps */ -/* m68k had no padding here. */ -#if !defined(CONFIG_M68K) || !defined(__KERNEL__) - __u16 ac_ahz; /* AHZ */ -#endif - __u32 ac_exitcode; /* Exitcode */ - char ac_comm[ACCT_COMM + 1]; /* Command Name */ - __u8 ac_etime_hi; /* Elapsed Time MSB */ - __u16 ac_etime_lo; /* Elapsed Time LSB */ - __u32 ac_uid; /* Real User ID */ - __u32 ac_gid; /* Real Group ID */ -}; - -struct acct_v3 -{ - char ac_flag; /* Flags */ - char ac_version; /* Always set to ACCT_VERSION */ - __u16 ac_tty; /* Control Terminal */ - __u32 ac_exitcode; /* Exitcode */ - __u32 ac_uid; /* Real User ID */ - __u32 ac_gid; /* Real Group ID */ - __u32 ac_pid; /* Process ID */ - __u32 ac_ppid; /* Parent Process ID */ - __u32 ac_btime; /* Process Creation Time */ -#ifdef __KERNEL__ - __u32 ac_etime; /* Elapsed Time */ -#else - float ac_etime; /* Elapsed Time */ -#endif - comp_t ac_utime; /* User Time */ - comp_t ac_stime; /* System Time */ - comp_t ac_mem; /* Average Memory Usage */ - comp_t ac_io; /* Chars Transferred */ - comp_t ac_rw; /* Blocks Read or Written */ - comp_t ac_minflt; /* Minor Pagefaults */ - comp_t ac_majflt; /* Major Pagefaults */ - comp_t ac_swaps; /* Number of Swaps */ - char ac_comm[ACCT_COMM]; /* Command Name */ -}; - -/* - * accounting flags - */ - /* bit set when the process ... */ -#define AFORK 0x01 /* ... executed fork, but did not exec */ -#define ASU 0x02 /* ... used super-user privileges */ -#define ACOMPAT 0x04 /* ... used compatibility mode (VAX only not used) */ -#define ACORE 0x08 /* ... dumped core */ -#define AXSIG 0x10 /* ... was killed by a signal */ - -#ifdef __BIG_ENDIAN -#define ACCT_BYTEORDER 0x80 /* accounting file is big endian */ -#else -#define ACCT_BYTEORDER 0x00 /* accounting file is little endian */ -#endif - -#ifdef __KERNEL__ #ifdef CONFIG_BSD_PROCESS_ACCT @@ -163,12 +65,6 @@ typedef struct acct_v3 acct_t; typedef struct acct acct_t; #endif -#else -#define ACCT_VERSION 2 -#define AHZ (HZ) -#endif /* __KERNEL */ - -#ifdef __KERNEL__ #include <linux/jiffies.h> /* * Yet another set of HZ to *HZ helper functions. @@ -210,6 +106,4 @@ static inline u64 nsec_to_AHZ(u64 x) return x; } -#endif /* __KERNEL */ - #endif /* _LINUX_ACCT_H */ diff --git a/include/linux/adb.h b/include/linux/adb.h index 63bca502fa55..cde41300c7ad 100644 --- a/include/linux/adb.h +++ b/include/linux/adb.h @@ -4,43 +4,8 @@ #ifndef __ADB_H #define __ADB_H -/* ADB commands */ -#define ADB_BUSRESET 0 -#define ADB_FLUSH(id) (0x01 | ((id) << 4)) -#define ADB_WRITEREG(id, reg) (0x08 | (reg) | ((id) << 4)) -#define ADB_READREG(id, reg) (0x0C | (reg) | ((id) << 4)) +#include <uapi/linux/adb.h> -/* ADB default device IDs (upper 4 bits of ADB command byte) */ -#define ADB_DONGLE 1 /* "software execution control" devices */ -#define ADB_KEYBOARD 2 -#define ADB_MOUSE 3 -#define ADB_TABLET 4 -#define ADB_MODEM 5 -#define ADB_MISC 7 /* maybe a monitor */ - -#define ADB_RET_OK 0 -#define ADB_RET_TIMEOUT 3 - -/* The kind of ADB request. The controller may emulate some - or all of those CUDA/PMU packet kinds */ -#define ADB_PACKET 0 -#define CUDA_PACKET 1 -#define ERROR_PACKET 2 -#define TIMER_PACKET 3 -#define POWER_PACKET 4 -#define MACIIC_PACKET 5 -#define PMU_PACKET 6 -#define ADB_QUERY 7 - -/* ADB queries */ - -/* ADB_QUERY_GETDEVINFO - * Query ADB slot for device presence - * data[2] = id, rep[0] = orig addr, rep[1] = handler_id - */ -#define ADB_QUERY_GETDEVINFO 1 - -#ifdef __KERNEL__ struct adb_request { unsigned char data[32]; @@ -98,6 +63,4 @@ int adb_reset_bus(void); int adb_try_handler_change(int address, int new_id); int adb_get_infos(int address, int *original_address, int *handler_id); -#endif /* __KERNEL__ */ - #endif /* __ADB_H */ diff --git a/include/linux/adfs_fs.h b/include/linux/adfs_fs.h index b19801f73890..0d991071a9d4 100644 --- a/include/linux/adfs_fs.h +++ b/include/linux/adfs_fs.h @@ -1,47 +1,9 @@ #ifndef _ADFS_FS_H #define _ADFS_FS_H -#include <linux/types.h> -#include <linux/magic.h> +#include <uapi/linux/adfs_fs.h> /* - * Disc Record at disc address 0xc00 - */ -struct adfs_discrecord { - __u8 log2secsize; - __u8 secspertrack; - __u8 heads; - __u8 density; - __u8 idlen; - __u8 log2bpmb; - __u8 skew; - __u8 bootoption; - __u8 lowsector; - __u8 nzones; - __le16 zone_spare; - __le32 root; - __le32 disc_size; - __le16 disc_id; - __u8 disc_name[10]; - __le32 disc_type; - __le32 disc_size_high; - __u8 log2sharesize:4; - __u8 unused40:4; - __u8 big_flag:1; - __u8 unused41:1; - __u8 nzones_high; - __le32 format_version; - __le32 root_size; - __u8 unused52[60 - 52]; -}; - -#define ADFS_DISCRECORD (0xc00) -#define ADFS_DR_OFFSET (0x1c0) -#define ADFS_DR_SIZE 60 -#define ADFS_DR_SIZE_BITS (ADFS_DR_SIZE << 3) - -#ifdef __KERNEL__ -/* * Calculate the boot block checksum on an ADFS drive. Note that this will * appear to be correct if the sector contains all zeros, so also check that * the disk size is non-zero!!! @@ -59,5 +21,3 @@ static inline int adfs_checkbblk(unsigned char *ptr) return (result & 0xff) != ptr[511]; } #endif - -#endif diff --git a/include/linux/agpgart.h b/include/linux/agpgart.h index f6778eceb8f4..c6b61ca97053 100644 --- a/include/linux/agpgart.h +++ b/include/linux/agpgart.h @@ -23,94 +23,12 @@ * OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. * */ - #ifndef _AGP_H #define _AGP_H 1 -#define AGPIOC_BASE 'A' -#define AGPIOC_INFO _IOR (AGPIOC_BASE, 0, struct agp_info*) -#define AGPIOC_ACQUIRE _IO (AGPIOC_BASE, 1) -#define AGPIOC_RELEASE _IO (AGPIOC_BASE, 2) -#define AGPIOC_SETUP _IOW (AGPIOC_BASE, 3, struct agp_setup*) -#define AGPIOC_RESERVE _IOW (AGPIOC_BASE, 4, struct agp_region*) -#define AGPIOC_PROTECT _IOW (AGPIOC_BASE, 5, struct agp_region*) -#define AGPIOC_ALLOCATE _IOWR(AGPIOC_BASE, 6, struct agp_allocate*) -#define AGPIOC_DEALLOCATE _IOW (AGPIOC_BASE, 7, int) -#define AGPIOC_BIND _IOW (AGPIOC_BASE, 8, struct agp_bind*) -#define AGPIOC_UNBIND _IOW (AGPIOC_BASE, 9, struct agp_unbind*) -#define AGPIOC_CHIPSET_FLUSH _IO (AGPIOC_BASE, 10) - -#define AGP_DEVICE "/dev/agpgart" - -#ifndef TRUE -#define TRUE 1 -#endif - -#ifndef FALSE -#define FALSE 0 -#endif - -#ifndef __KERNEL__ -#include <linux/types.h> - -struct agp_version { - __u16 major; - __u16 minor; -}; - -typedef struct _agp_info { - struct agp_version version; /* version of the driver */ - __u32 bridge_id; /* bridge vendor/device */ - __u32 agp_mode; /* mode info of bridge */ - unsigned long aper_base;/* base of aperture */ - size_t aper_size; /* size of aperture */ - size_t pg_total; /* max pages (swap + system) */ - size_t pg_system; /* max pages (system) */ - size_t pg_used; /* current pages used */ -} agp_info; - -typedef struct _agp_setup { - __u32 agp_mode; /* mode info of bridge */ -} agp_setup; - -/* - * The "prot" down below needs still a "sleep" flag somehow ... - */ -typedef struct _agp_segment { - __kernel_off_t pg_start; /* starting page to populate */ - __kernel_size_t pg_count; /* number of pages */ - int prot; /* prot flags for mmap */ -} agp_segment; - -typedef struct _agp_region { - __kernel_pid_t pid; /* pid of process */ - __kernel_size_t seg_count; /* number of segments */ - struct _agp_segment *seg_list; -} agp_region; - -typedef struct _agp_allocate { - int key; /* tag of allocation */ - __kernel_size_t pg_count;/* number of pages */ - __u32 type; /* 0 == normal, other devspec */ - __u32 physical; /* device specific (some devices - * need a phys address of the - * actual page behind the gatt - * table) */ -} agp_allocate; - -typedef struct _agp_bind { - int key; /* tag of allocation */ - __kernel_off_t pg_start;/* starting page to populate */ -} agp_bind; - -typedef struct _agp_unbind { - int key; /* tag of allocation */ - __u32 priority; /* priority for paging out */ -} agp_unbind; - -#else /* __KERNEL__ */ #include <linux/mutex.h> #include <linux/agp_backend.h> +#include <uapi/linux/agpgart.h> #define AGPGART_MINOR 175 @@ -209,6 +127,4 @@ struct agp_front_data { bool backend_acquired; }; -#endif /* __KERNEL__ */ - #endif /* _AGP_H */ diff --git a/include/linux/apm_bios.h b/include/linux/apm_bios.h index 01a6244c9bc9..9c3a87184f48 100644 --- a/include/linux/apm_bios.h +++ b/include/linux/apm_bios.h @@ -1,6 +1,3 @@ -#ifndef _LINUX_APM_H -#define _LINUX_APM_H - /* * Include file for the interface to an APM BIOS * Copyright 1994-2001 Stephen Rothwell (sfr@canb.auug.org.au) @@ -15,25 +12,11 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * General Public License for more details. */ +#ifndef _LINUX_APM_H +#define _LINUX_APM_H -#include <linux/types.h> - -typedef unsigned short apm_event_t; -typedef unsigned short apm_eventinfo_t; - -struct apm_bios_info { - __u16 version; - __u16 cseg; - __u32 offset; - __u16 cseg_16; - __u16 dseg; - __u16 flags; - __u16 cseg_len; - __u16 cseg_16_len; - __u16 dseg_len; -}; +#include <uapi/linux/apm_bios.h> -#ifdef __KERNEL__ #define APM_CS (GDT_ENTRY_APMBIOS_BASE * 8) #define APM_CS_16 (APM_CS + 8) @@ -110,111 +93,9 @@ struct apm_info { */ extern struct apm_info apm_info; -#endif /* __KERNEL__ */ - -/* - * Power states - */ -#define APM_STATE_READY 0x0000 -#define APM_STATE_STANDBY 0x0001 -#define APM_STATE_SUSPEND 0x0002 -#define APM_STATE_OFF 0x0003 -#define APM_STATE_BUSY 0x0004 -#define APM_STATE_REJECT 0x0005 -#define APM_STATE_OEM_SYS 0x0020 -#define APM_STATE_OEM_DEV 0x0040 - -#define APM_STATE_DISABLE 0x0000 -#define APM_STATE_ENABLE 0x0001 - -#define APM_STATE_DISENGAGE 0x0000 -#define APM_STATE_ENGAGE 0x0001 - -/* - * Events (results of Get PM Event) - */ -#define APM_SYS_STANDBY 0x0001 -#define APM_SYS_SUSPEND 0x0002 -#define APM_NORMAL_RESUME 0x0003 -#define APM_CRITICAL_RESUME 0x0004 -#define APM_LOW_BATTERY 0x0005 -#define APM_POWER_STATUS_CHANGE 0x0006 -#define APM_UPDATE_TIME 0x0007 -#define APM_CRITICAL_SUSPEND 0x0008 -#define APM_USER_STANDBY 0x0009 -#define APM_USER_SUSPEND 0x000a -#define APM_STANDBY_RESUME 0x000b -#define APM_CAPABILITY_CHANGE 0x000c - -/* - * Error codes - */ -#define APM_SUCCESS 0x00 -#define APM_DISABLED 0x01 -#define APM_CONNECTED 0x02 -#define APM_NOT_CONNECTED 0x03 -#define APM_16_CONNECTED 0x05 -#define APM_16_UNSUPPORTED 0x06 -#define APM_32_CONNECTED 0x07 -#define APM_32_UNSUPPORTED 0x08 -#define APM_BAD_DEVICE 0x09 -#define APM_BAD_PARAM 0x0a -#define APM_NOT_ENGAGED 0x0b -#define APM_BAD_FUNCTION 0x0c -#define APM_RESUME_DISABLED 0x0d -#define APM_NO_ERROR 0x53 -#define APM_BAD_STATE 0x60 -#define APM_NO_EVENTS 0x80 -#define APM_NOT_PRESENT 0x86 - -/* - * APM Device IDs - */ -#define APM_DEVICE_BIOS 0x0000 -#define APM_DEVICE_ALL 0x0001 -#define APM_DEVICE_DISPLAY 0x0100 -#define APM_DEVICE_STORAGE 0x0200 -#define APM_DEVICE_PARALLEL 0x0300 -#define APM_DEVICE_SERIAL 0x0400 -#define APM_DEVICE_NETWORK 0x0500 -#define APM_DEVICE_PCMCIA 0x0600 -#define APM_DEVICE_BATTERY 0x8000 -#define APM_DEVICE_OEM 0xe000 -#define APM_DEVICE_OLD_ALL 0xffff -#define APM_DEVICE_CLASS 0x00ff -#define APM_DEVICE_MASK 0xff00 - -#ifdef __KERNEL__ /* * This is the "All Devices" ID communicated to the BIOS */ #define APM_DEVICE_BALL ((apm_info.connection_version > 0x0100) ? \ APM_DEVICE_ALL : APM_DEVICE_OLD_ALL) -#endif - -/* - * Battery status - */ -#define APM_MAX_BATTERIES 2 - -/* - * APM defined capability bit flags - */ -#define APM_CAP_GLOBAL_STANDBY 0x0001 -#define APM_CAP_GLOBAL_SUSPEND 0x0002 -#define APM_CAP_RESUME_STANDBY_TIMER 0x0004 /* Timer resume from standby */ -#define APM_CAP_RESUME_SUSPEND_TIMER 0x0008 /* Timer resume from suspend */ -#define APM_CAP_RESUME_STANDBY_RING 0x0010 /* Resume on Ring fr standby */ -#define APM_CAP_RESUME_SUSPEND_RING 0x0020 /* Resume on Ring fr suspend */ -#define APM_CAP_RESUME_STANDBY_PCMCIA 0x0040 /* Resume on PCMCIA Ring */ -#define APM_CAP_RESUME_SUSPEND_PCMCIA 0x0080 /* Resume on PCMCIA Ring */ - -/* - * ioctl operations - */ -#include <linux/ioctl.h> - -#define APM_IOC_STANDBY _IO('A', 1) -#define APM_IOC_SUSPEND _IO('A', 2) - #endif /* LINUX_APM_H */ diff --git a/include/linux/atalk.h b/include/linux/atalk.h index f57c36881c48..73fd8b7e9534 100644 --- a/include/linux/atalk.h +++ b/include/linux/atalk.h @@ -1,49 +1,9 @@ #ifndef __LINUX_ATALK_H__ #define __LINUX_ATALK_H__ -#include <linux/types.h> -#include <asm/byteorder.h> -#include <linux/socket.h> - -/* - * AppleTalk networking structures - * - * The following are directly referenced from the University Of Michigan - * netatalk for compatibility reasons. - */ -#define ATPORT_FIRST 1 -#define ATPORT_RESERVED 128 -#define ATPORT_LAST 254 /* 254 is only legal on localtalk */ -#define ATADDR_ANYNET (__u16)0 -#define ATADDR_ANYNODE (__u8)0 -#define ATADDR_ANYPORT (__u8)0 -#define ATADDR_BCAST (__u8)255 -#define DDP_MAXSZ 587 -#define DDP_MAXHOPS 15 /* 4 bits of hop counter */ - -#define SIOCATALKDIFADDR (SIOCPROTOPRIVATE + 0) - -struct atalk_addr { - __be16 s_net; - __u8 s_node; -}; - -struct sockaddr_at { - __kernel_sa_family_t sat_family; - __u8 sat_port; - struct atalk_addr sat_addr; - char sat_zero[8]; -}; - -struct atalk_netrange { - __u8 nr_phase; - __be16 nr_firstnet; - __be16 nr_lastnet; -}; - -#ifdef __KERNEL__ #include <net/sock.h> +#include <uapi/linux/atalk.h> struct atalk_route { struct net_device *dev; @@ -205,5 +165,4 @@ extern void atalk_proc_exit(void); #define atalk_proc_exit() do { } while(0) #endif /* CONFIG_PROC_FS */ -#endif /* __KERNEL__ */ #endif /* __LINUX_ATALK_H__ */ diff --git a/include/linux/atm.h b/include/linux/atm.h index d3b292174aeb..30006c435951 100644 --- a/include/linux/atm.h +++ b/include/linux/atm.h @@ -1,242 +1,9 @@ /* atm.h - general ATM declarations */ - -/* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */ - - -/* - * WARNING: User-space programs should not #include <linux/atm.h> directly. - * Instead, #include <atm.h> - */ - #ifndef _LINUX_ATM_H #define _LINUX_ATM_H -/* - * BEGIN_xx and END_xx markers are used for automatic generation of - * documentation. Do not change them. - */ - -#include <linux/compiler.h> -#include <linux/atmapi.h> -#include <linux/atmsap.h> -#include <linux/atmioc.h> -#include <linux/types.h> - - -/* general ATM constants */ -#define ATM_CELL_SIZE 53 /* ATM cell size incl. header */ -#define ATM_CELL_PAYLOAD 48 /* ATM payload size */ -#define ATM_AAL0_SDU 52 /* AAL0 SDU size */ -#define ATM_MAX_AAL34_PDU 65535 /* maximum AAL3/4 PDU payload */ -#define ATM_AAL5_TRAILER 8 /* AAL5 trailer size */ -#define ATM_MAX_AAL5_PDU 65535 /* maximum AAL5 PDU payload */ -#define ATM_MAX_CDV 9999 /* maximum (default) CDV */ -#define ATM_NOT_RSV_VCI 32 /* first non-reserved VCI value */ - -#define ATM_MAX_VPI 255 /* maximum VPI at the UNI */ -#define ATM_MAX_VPI_NNI 4096 /* maximum VPI at the NNI */ -#define ATM_MAX_VCI 65535 /* maximum VCI */ - - -/* "protcol" values for the socket system call */ -#define ATM_NO_AAL 0 /* AAL not specified */ -#define ATM_AAL0 13 /* "raw" ATM cells */ -#define ATM_AAL1 1 /* AAL1 (CBR) */ -#define ATM_AAL2 2 /* AAL2 (VBR) */ -#define ATM_AAL34 3 /* AAL3/4 (data) */ -#define ATM_AAL5 5 /* AAL5 (data) */ - -/* - * socket option name coding functions - * - * Note that __SO_ENCODE and __SO_LEVEL are somewhat a hack since the - * << 22 only reserves 9 bits for the level. On some architectures - * SOL_SOCKET is 0xFFFF, so that's a bit of a problem - */ - -#define __SO_ENCODE(l,n,t) ((((l) & 0x1FF) << 22) | ((n) << 16) | \ - sizeof(t)) -#define __SO_LEVEL_MATCH(c,m) (((c) >> 22) == ((m) & 0x1FF)) -#define __SO_NUMBER(c) (((c) >> 16) & 0x3f) -#define __SO_SIZE(c) ((c) & 0x3fff) - -/* - * ATM layer - */ - -#define SO_SETCLP __SO_ENCODE(SOL_ATM,0,int) - /* set CLP bit value - TODO */ -#define SO_CIRANGE __SO_ENCODE(SOL_ATM,1,struct atm_cirange) - /* connection identifier range; socket must be - bound or connected */ -#define SO_ATMQOS __SO_ENCODE(SOL_ATM,2,struct atm_qos) - /* Quality of Service setting */ -#define SO_ATMSAP __SO_ENCODE(SOL_ATM,3,struct atm_sap) - /* Service Access Point */ -#define SO_ATMPVC __SO_ENCODE(SOL_ATM,4,struct sockaddr_atmpvc) - /* "PVC" address (also for SVCs); get only */ -#define SO_MULTIPOINT __SO_ENCODE(SOL_ATM, 5, int) - /* make this vc a p2mp */ - - -/* - * Note @@@: since the socket layers don't really distinguish the control and - * the data plane but generally seems to be data plane-centric, any layer is - * about equally wrong for the SAP. If you have a better idea about this, - * please speak up ... - */ - - -/* ATM cell header (for AAL0) */ - -/* BEGIN_CH */ -#define ATM_HDR_GFC_MASK 0xf0000000 -#define ATM_HDR_GFC_SHIFT 28 -#define ATM_HDR_VPI_MASK 0x0ff00000 -#define ATM_HDR_VPI_SHIFT 20 -#define ATM_HDR_VCI_MASK 0x000ffff0 -#define ATM_HDR_VCI_SHIFT 4 -#define ATM_HDR_PTI_MASK 0x0000000e -#define ATM_HDR_PTI_SHIFT 1 -#define ATM_HDR_CLP 0x00000001 -/* END_CH */ - - -/* PTI codings */ - -/* BEGIN_PTI */ -#define ATM_PTI_US0 0 /* user data cell, congestion not exp, SDU-type 0 */ -#define ATM_PTI_US1 1 /* user data cell, congestion not exp, SDU-type 1 */ -#define ATM_PTI_UCES0 2 /* user data cell, cong. experienced, SDU-type 0 */ -#define ATM_PTI_UCES1 3 /* user data cell, cong. experienced, SDU-type 1 */ -#define ATM_PTI_SEGF5 4 /* segment OAM F5 flow related cell */ -#define ATM_PTI_E2EF5 5 /* end-to-end OAM F5 flow related cell */ -#define ATM_PTI_RSV_RM 6 /* reserved for traffic control/resource mgmt */ -#define ATM_PTI_RSV 7 /* reserved */ -/* END_PTI */ - - -/* - * The following items should stay in linux/atm.h, which should be linked to - * netatm/atm.h - */ - -/* Traffic description */ - -#define ATM_NONE 0 /* no traffic */ -#define ATM_UBR 1 -#define ATM_CBR 2 -#define ATM_VBR 3 -#define ATM_ABR 4 -#define ATM_ANYCLASS 5 /* compatible with everything */ - -#define ATM_MAX_PCR -1 /* maximum available PCR */ - -struct atm_trafprm { - unsigned char traffic_class; /* traffic class (ATM_UBR, ...) */ - int max_pcr; /* maximum PCR in cells per second */ - int pcr; /* desired PCR in cells per second */ - int min_pcr; /* minimum PCR in cells per second */ - int max_cdv; /* maximum CDV in microseconds */ - int max_sdu; /* maximum SDU in bytes */ - /* extra params for ABR */ - unsigned int icr; /* Initial Cell Rate (24-bit) */ - unsigned int tbe; /* Transient Buffer Exposure (24-bit) */ - unsigned int frtt : 24; /* Fixed Round Trip Time (24-bit) */ - unsigned int rif : 4; /* Rate Increment Factor (4-bit) */ - unsigned int rdf : 4; /* Rate Decrease Factor (4-bit) */ - unsigned int nrm_pres :1; /* nrm present bit */ - unsigned int trm_pres :1; /* rm present bit */ - unsigned int adtf_pres :1; /* adtf present bit */ - unsigned int cdf_pres :1; /* cdf present bit*/ - unsigned int nrm :3; /* Max # of Cells for each forward RM cell (3-bit) */ - unsigned int trm :3; /* Time between forward RM cells (3-bit) */ - unsigned int adtf :10; /* ACR Decrease Time Factor (10-bit) */ - unsigned int cdf :3; /* Cutoff Decrease Factor (3-bit) */ - unsigned int spare :9; /* spare bits */ -}; - -struct atm_qos { - struct atm_trafprm txtp; /* parameters in TX direction */ - struct atm_trafprm rxtp __ATM_API_ALIGN; - /* parameters in RX direction */ - unsigned char aal __ATM_API_ALIGN; -}; - -/* PVC addressing */ - -#define ATM_ITF_ANY -1 /* "magic" PVC address values */ -#define ATM_VPI_ANY -1 -#define ATM_VCI_ANY -1 -#define ATM_VPI_UNSPEC -2 -#define ATM_VCI_UNSPEC -2 - - -struct sockaddr_atmpvc { - unsigned short sap_family; /* address family, AF_ATMPVC */ - struct { /* PVC address */ - short itf; /* ATM interface */ - short vpi; /* VPI (only 8 bits at UNI) */ - int vci; /* VCI (only 16 bits at UNI) */ - } sap_addr __ATM_API_ALIGN; /* PVC address */ -}; - -/* SVC addressing */ - -#define ATM_ESA_LEN 20 /* ATM End System Address length */ -#define ATM_E164_LEN 12 /* maximum E.164 number length */ - -#define ATM_AFI_DCC 0x39 /* DCC ATM Format */ -#define ATM_AFI_ICD 0x47 /* ICD ATM Format */ -#define ATM_AFI_E164 0x45 /* E.164 ATM Format */ -#define ATM_AFI_LOCAL 0x49 /* Local ATM Format */ - -#define ATM_AFI_DCC_GROUP 0xBD /* DCC ATM Group Format */ -#define ATM_AFI_ICD_GROUP 0xC5 /* ICD ATM Group Format */ -#define ATM_AFI_E164_GROUP 0xC3 /* E.164 ATM Group Format */ -#define ATM_AFI_LOCAL_GROUP 0xC7 /* Local ATM Group Format */ +#include <uapi/linux/atm.h> -#define ATM_LIJ_NONE 0 /* no leaf-initiated join */ -#define ATM_LIJ 1 /* request joining */ -#define ATM_LIJ_RPJ 2 /* set to root-prompted join */ -#define ATM_LIJ_NJ 3 /* set to network join */ - - -struct sockaddr_atmsvc { - unsigned short sas_family; /* address family, AF_ATMSVC */ - struct { /* SVC address */ - unsigned char prv[ATM_ESA_LEN];/* private ATM address */ - char pub[ATM_E164_LEN+1]; /* public address (E.164) */ - /* unused addresses must be bzero'ed */ - char lij_type; /* role in LIJ call; one of ATM_LIJ* */ - __u32 lij_id; /* LIJ call identifier */ - } sas_addr __ATM_API_ALIGN; /* SVC address */ -}; - - -static __inline__ int atmsvc_addr_in_use(struct sockaddr_atmsvc addr) -{ - return *addr.sas_addr.prv || *addr.sas_addr.pub; -} - - -static __inline__ int atmpvc_addr_in_use(struct sockaddr_atmpvc addr) -{ - return addr.sap_addr.itf || addr.sap_addr.vpi || addr.sap_addr.vci; -} - - -/* - * Some stuff for linux/sockios.h - */ - -struct atmif_sioc { - int number; - int length; - void __user *arg; -}; - -#ifdef __KERNEL__ #ifdef CONFIG_COMPAT #include <linux/compat.h> struct compat_atmif_sioc { @@ -246,6 +13,3 @@ struct compat_atmif_sioc { }; #endif #endif - -typedef unsigned short atm_backend_t; -#endif diff --git a/include/linux/atm_tcp.h b/include/linux/atm_tcp.h index 375638f8554b..db6b65fc0aec 100644 --- a/include/linux/atm_tcp.h +++ b/include/linux/atm_tcp.h @@ -3,61 +3,11 @@ /* Written 1997-2000 by Werner Almesberger, EPFL LRC/ICA */ - #ifndef LINUX_ATM_TCP_H #define LINUX_ATM_TCP_H -#include <linux/atmapi.h> -#include <linux/atm.h> -#include <linux/atmioc.h> -#include <linux/types.h> - - -/* - * All values in struct atmtcp_hdr are in network byte order - */ - -struct atmtcp_hdr { - __u16 vpi; - __u16 vci; - __u32 length; /* ... of data part */ -}; - -/* - * All values in struct atmtcp_command are in host byte order - */ - -#define ATMTCP_HDR_MAGIC (~0) /* this length indicates a command */ -#define ATMTCP_CTRL_OPEN 1 /* request/reply */ -#define ATMTCP_CTRL_CLOSE 2 /* request/reply */ +#include <uapi/linux/atm_tcp.h> -struct atmtcp_control { - struct atmtcp_hdr hdr; /* must be first */ - int type; /* message type; both directions */ - atm_kptr_t vcc; /* both directions */ - struct sockaddr_atmpvc addr; /* suggested value from kernel */ - struct atm_qos qos; /* both directions */ - int result; /* to kernel only */ -} __ATM_API_ALIGN; - -/* - * Field usage: - * Messge type dir. hdr.v?i type addr qos vcc result - * ----------- ---- ------- ---- ---- --- --- ------ - * OPEN K->D Y Y Y Y Y 0 - * OPEN D->K - Y Y Y Y Y - * CLOSE K->D - - Y - Y 0 - * CLOSE D->K - - - - Y Y - */ - -#define SIOCSIFATMTCP _IO('a',ATMIOC_ITF) /* set ATMTCP mode */ -#define ATMTCP_CREATE _IO('a',ATMIOC_ITF+14) /* create persistent ATMTCP - interface */ -#define ATMTCP_REMOVE _IO('a',ATMIOC_ITF+15) /* destroy persistent ATMTCP - interface */ - - -#ifdef __KERNEL__ struct atm_tcp_ops { int (*attach)(struct atm_vcc *vcc,int itf); @@ -69,5 +19,3 @@ struct atm_tcp_ops { extern struct atm_tcp_ops atm_tcp_ops; #endif - -#endif diff --git a/include/linux/atmdev.h b/include/linux/atmdev.h index 06fd4bbc58f6..22ef21c33d0c 100644 --- a/include/linux/atmdev.h +++ b/include/linux/atmdev.h @@ -1,218 +1,8 @@ /* atmdev.h - ATM device driver declarations and various related items */ - -/* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */ - - #ifndef LINUX_ATMDEV_H #define LINUX_ATMDEV_H -#include <linux/atmapi.h> -#include <linux/atm.h> -#include <linux/atmioc.h> - - -#define ESI_LEN 6 - -#define ATM_OC3_PCR (155520000/270*260/8/53) - /* OC3 link rate: 155520000 bps - SONET overhead: /270*260 (9 section, 1 path) - bits per cell: /8/53 - max cell rate: 353207.547 cells/sec */ -#define ATM_25_PCR ((25600000/8-8000)/54) - /* 25 Mbps ATM cell rate (59111) */ -#define ATM_OC12_PCR (622080000/1080*1040/8/53) - /* OC12 link rate: 622080000 bps - SONET overhead: /1080*1040 - bits per cell: /8/53 - max cell rate: 1412830.188 cells/sec */ -#define ATM_DS3_PCR (8000*12) - /* DS3: 12 cells in a 125 usec time slot */ - - -#define __AAL_STAT_ITEMS \ - __HANDLE_ITEM(tx); /* TX okay */ \ - __HANDLE_ITEM(tx_err); /* TX errors */ \ - __HANDLE_ITEM(rx); /* RX okay */ \ - __HANDLE_ITEM(rx_err); /* RX errors */ \ - __HANDLE_ITEM(rx_drop); /* RX out of memory */ - -struct atm_aal_stats { -#define __HANDLE_ITEM(i) int i - __AAL_STAT_ITEMS -#undef __HANDLE_ITEM -}; - - -struct atm_dev_stats { - struct atm_aal_stats aal0; - struct atm_aal_stats aal34; - struct atm_aal_stats aal5; -} __ATM_API_ALIGN; - - -#define ATM_GETLINKRATE _IOW('a',ATMIOC_ITF+1,struct atmif_sioc) - /* get link rate */ -#define ATM_GETNAMES _IOW('a',ATMIOC_ITF+3,struct atm_iobuf) - /* get interface names (numbers) */ -#define ATM_GETTYPE _IOW('a',ATMIOC_ITF+4,struct atmif_sioc) - /* get interface type name */ -#define ATM_GETESI _IOW('a',ATMIOC_ITF+5,struct atmif_sioc) - /* get interface ESI */ -#define ATM_GETADDR _IOW('a',ATMIOC_ITF+6,struct atmif_sioc) - /* get itf's local ATM addr. list */ -#define ATM_RSTADDR _IOW('a',ATMIOC_ITF+7,struct atmif_sioc) - /* reset itf's ATM address list */ -#define ATM_ADDADDR _IOW('a',ATMIOC_ITF+8,struct atmif_sioc) - /* add a local ATM address */ -#define ATM_DELADDR _IOW('a',ATMIOC_ITF+9,struct atmif_sioc) - /* remove a local ATM address */ -#define ATM_GETCIRANGE _IOW('a',ATMIOC_ITF+10,struct atmif_sioc) - /* get connection identifier range */ -#define ATM_SETCIRANGE _IOW('a',ATMIOC_ITF+11,struct atmif_sioc) - /* set connection identifier range */ -#define ATM_SETESI _IOW('a',ATMIOC_ITF+12,struct atmif_sioc) - /* set interface ESI */ -#define ATM_SETESIF _IOW('a',ATMIOC_ITF+13,struct atmif_sioc) - /* force interface ESI */ -#define ATM_ADDLECSADDR _IOW('a', ATMIOC_ITF+14, struct atmif_sioc) - /* register a LECS address */ -#define ATM_DELLECSADDR _IOW('a', ATMIOC_ITF+15, struct atmif_sioc) - /* unregister a LECS address */ -#define ATM_GETLECSADDR _IOW('a', ATMIOC_ITF+16, struct atmif_sioc) - /* retrieve LECS address(es) */ - -#define ATM_GETSTAT _IOW('a',ATMIOC_SARCOM+0,struct atmif_sioc) - /* get AAL layer statistics */ -#define ATM_GETSTATZ _IOW('a',ATMIOC_SARCOM+1,struct atmif_sioc) - /* get AAL layer statistics and zero */ -#define ATM_GETLOOP _IOW('a',ATMIOC_SARCOM+2,struct atmif_sioc) - /* get loopback mode */ -#define ATM_SETLOOP _IOW('a',ATMIOC_SARCOM+3,struct atmif_sioc) - /* set loopback mode */ -#define ATM_QUERYLOOP _IOW('a',ATMIOC_SARCOM+4,struct atmif_sioc) - /* query supported loopback modes */ -#define ATM_SETSC _IOW('a',ATMIOC_SPECIAL+1,int) - /* enable or disable single-copy */ -#define ATM_SETBACKEND _IOW('a',ATMIOC_SPECIAL+2,atm_backend_t) - /* set backend handler */ -#define ATM_NEWBACKENDIF _IOW('a',ATMIOC_SPECIAL+3,atm_backend_t) - /* use backend to make new if */ -#define ATM_ADDPARTY _IOW('a', ATMIOC_SPECIAL+4,struct atm_iobuf) - /* add party to p2mp call */ -#ifdef CONFIG_COMPAT -/* It actually takes struct sockaddr_atmsvc, not struct atm_iobuf */ -#define COMPAT_ATM_ADDPARTY _IOW('a', ATMIOC_SPECIAL+4,struct compat_atm_iobuf) -#endif -#define ATM_DROPPARTY _IOW('a', ATMIOC_SPECIAL+5,int) - /* drop party from p2mp call */ - -/* - * These are backend handkers that can be set via the ATM_SETBACKEND call - * above. In the future we may support dynamic loading of these - for now, - * they're just being used to share the ATMIOC_BACKEND ioctls - */ -#define ATM_BACKEND_RAW 0 -#define ATM_BACKEND_PPP 1 /* PPPoATM - RFC2364 */ -#define ATM_BACKEND_BR2684 2 /* Bridged RFC1483/2684 */ - -/* for ATM_GETTYPE */ -#define ATM_ITFTYP_LEN 8 /* maximum length of interface type name */ - -/* - * Loopback modes for ATM_{PHY,SAR}_{GET,SET}LOOP - */ - -/* Point of loopback CPU-->SAR-->PHY-->line--> ... */ -#define __ATM_LM_NONE 0 /* no loop back ^ ^ ^ ^ */ -#define __ATM_LM_AAL 1 /* loop back PDUs --' | | | */ -#define __ATM_LM_ATM 2 /* loop back ATM cells ---' | | */ -/* RESERVED 4 loop back on PHY side ---' */ -#define __ATM_LM_PHY 8 /* loop back bits (digital) ----' | */ -#define __ATM_LM_ANALOG 16 /* loop back the analog signal --------' */ - -/* Direction of loopback */ -#define __ATM_LM_MKLOC(n) ((n)) /* Local (i.e. loop TX to RX) */ -#define __ATM_LM_MKRMT(n) ((n) << 8) /* Remote (i.e. loop RX to TX) */ - -#define __ATM_LM_XTLOC(n) ((n) & 0xff) -#define __ATM_LM_XTRMT(n) (((n) >> 8) & 0xff) - -#define ATM_LM_NONE 0 /* no loopback */ - -#define ATM_LM_LOC_AAL __ATM_LM_MKLOC(__ATM_LM_AAL) -#define ATM_LM_LOC_ATM __ATM_LM_MKLOC(__ATM_LM_ATM) -#define ATM_LM_LOC_PHY __ATM_LM_MKLOC(__ATM_LM_PHY) -#define ATM_LM_LOC_ANALOG __ATM_LM_MKLOC(__ATM_LM_ANALOG) - -#define ATM_LM_RMT_AAL __ATM_LM_MKRMT(__ATM_LM_AAL) -#define ATM_LM_RMT_ATM __ATM_LM_MKRMT(__ATM_LM_ATM) -#define ATM_LM_RMT_PHY __ATM_LM_MKRMT(__ATM_LM_PHY) -#define ATM_LM_RMT_ANALOG __ATM_LM_MKRMT(__ATM_LM_ANALOG) - -/* - * Note: ATM_LM_LOC_* and ATM_LM_RMT_* can be combined, provided that - * __ATM_LM_XTLOC(x) <= __ATM_LM_XTRMT(x) - */ - - -struct atm_iobuf { - int length; - void __user *buffer; -}; - -/* for ATM_GETCIRANGE / ATM_SETCIRANGE */ - -#define ATM_CI_MAX -1 /* use maximum range of VPI/VCI */ - -struct atm_cirange { - signed char vpi_bits; /* 1..8, ATM_CI_MAX (-1) for maximum */ - signed char vci_bits; /* 1..16, ATM_CI_MAX (-1) for maximum */ -}; - -/* for ATM_SETSC; actually taken from the ATM_VF number space */ - -#define ATM_SC_RX 1024 /* enable RX single-copy */ -#define ATM_SC_TX 2048 /* enable TX single-copy */ - -#define ATM_BACKLOG_DEFAULT 32 /* if we get more, we're likely to time out - anyway */ - -/* MF: change_qos (Modify) flags */ - -#define ATM_MF_IMMED 1 /* Block until change is effective */ -#define ATM_MF_INC_RSV 2 /* Change reservation on increase */ -#define ATM_MF_INC_SHP 4 /* Change shaping on increase */ -#define ATM_MF_DEC_RSV 8 /* Change reservation on decrease */ -#define ATM_MF_DEC_SHP 16 /* Change shaping on decrease */ -#define ATM_MF_BWD 32 /* Set the backward direction parameters */ - -#define ATM_MF_SET (ATM_MF_INC_RSV | ATM_MF_INC_SHP | ATM_MF_DEC_RSV | \ - ATM_MF_DEC_SHP | ATM_MF_BWD) - -/* - * ATM_VS_* are used to express VC state in a human-friendly way. - */ - -#define ATM_VS_IDLE 0 /* VC is not used */ -#define ATM_VS_CONNECTED 1 /* VC is connected */ -#define ATM_VS_CLOSING 2 /* VC is closing */ -#define ATM_VS_LISTEN 3 /* VC is listening for incoming setups */ -#define ATM_VS_INUSE 4 /* VC is in use (registered with atmsigd) */ -#define ATM_VS_BOUND 5 /* VC is bound */ - -#define ATM_VS2TXT_MAP \ - "IDLE", "CONNECTED", "CLOSING", "LISTEN", "INUSE", "BOUND" - -#define ATM_VF2TXT_MAP \ - "ADDR", "READY", "PARTIAL", "REGIS", \ - "RELEASED", "HASQOS", "LISTEN", "META", \ - "256", "512", "1024", "2048", \ - "SESSION", "HASSAP", "BOUND", "CLOSE" - - -#ifdef __KERNEL__ - #include <linux/wait.h> /* wait_queue_head_t */ #include <linux/time.h> /* struct timeval */ #include <linux/net.h> @@ -221,6 +11,7 @@ struct atm_cirange { #include <linux/uio.h> #include <net/sock.h> #include <linux/atomic.h> +#include <uapi/linux/atmdev.h> #ifdef CONFIG_PROC_FS #include <linux/proc_fs.h> @@ -521,6 +312,4 @@ void deregister_atm_ioctl(struct atm_ioctl *); int register_atmdevice_notifier(struct notifier_block *nb); void unregister_atmdevice_notifier(struct notifier_block *nb); -#endif /* __KERNEL__ */ - #endif diff --git a/include/linux/audit.h b/include/linux/audit.h index b889fa64b0e0..bce729afbcf9 100644 --- a/include/linux/audit.h +++ b/include/linux/audit.h @@ -20,389 +20,11 @@ * Written by Rickard E. (Rik) Faith <faith@redhat.com> * */ - #ifndef _LINUX_AUDIT_H_ #define _LINUX_AUDIT_H_ -#include <linux/types.h> -#include <linux/elf-em.h> -#include <linux/ptrace.h> - -/* The netlink messages for the audit system is divided into blocks: - * 1000 - 1099 are for commanding the audit system - * 1100 - 1199 user space trusted application messages - * 1200 - 1299 messages internal to the audit daemon - * 1300 - 1399 audit event messages - * 1400 - 1499 SE Linux use - * 1500 - 1599 kernel LSPP events - * 1600 - 1699 kernel crypto events - * 1700 - 1799 kernel anomaly records - * 1800 - 1899 kernel integrity events - * 1900 - 1999 future kernel use - * 2000 is for otherwise unclassified kernel audit messages (legacy) - * 2001 - 2099 unused (kernel) - * 2100 - 2199 user space anomaly records - * 2200 - 2299 user space actions taken in response to anomalies - * 2300 - 2399 user space generated LSPP events - * 2400 - 2499 user space crypto events - * 2500 - 2999 future user space (maybe integrity labels and related events) - * - * Messages from 1000-1199 are bi-directional. 1200-1299 & 2100 - 2999 are - * exclusively user space. 1300-2099 is kernel --> user space - * communication. - */ -#define AUDIT_GET 1000 /* Get status */ -#define AUDIT_SET 1001 /* Set status (enable/disable/auditd) */ -#define AUDIT_LIST 1002 /* List syscall rules -- deprecated */ -#define AUDIT_ADD 1003 /* Add syscall rule -- deprecated */ -#define AUDIT_DEL 1004 /* Delete syscall rule -- deprecated */ -#define AUDIT_USER 1005 /* Message from userspace -- deprecated */ -#define AUDIT_LOGIN 1006 /* Define the login id and information */ -#define AUDIT_WATCH_INS 1007 /* Insert file/dir watch entry */ -#define AUDIT_WATCH_REM 1008 /* Remove file/dir watch entry */ -#define AUDIT_WATCH_LIST 1009 /* List all file/dir watches */ -#define AUDIT_SIGNAL_INFO 1010 /* Get info about sender of signal to auditd */ -#define AUDIT_ADD_RULE 1011 /* Add syscall filtering rule */ -#define AUDIT_DEL_RULE 1012 /* Delete syscall filtering rule */ -#define AUDIT_LIST_RULES 1013 /* List syscall filtering rules */ -#define AUDIT_TRIM 1014 /* Trim junk from watched tree */ -#define AUDIT_MAKE_EQUIV 1015 /* Append to watched tree */ -#define AUDIT_TTY_GET 1016 /* Get TTY auditing status */ -#define AUDIT_TTY_SET 1017 /* Set TTY auditing status */ - -#define AUDIT_FIRST_USER_MSG 1100 /* Userspace messages mostly uninteresting to kernel */ -#define AUDIT_USER_AVC 1107 /* We filter this differently */ -#define AUDIT_USER_TTY 1124 /* Non-ICANON TTY input meaning */ -#define AUDIT_LAST_USER_MSG 1199 -#define AUDIT_FIRST_USER_MSG2 2100 /* More user space messages */ -#define AUDIT_LAST_USER_MSG2 2999 - -#define AUDIT_DAEMON_START 1200 /* Daemon startup record */ -#define AUDIT_DAEMON_END 1201 /* Daemon normal stop record */ -#define AUDIT_DAEMON_ABORT 1202 /* Daemon error stop record */ -#define AUDIT_DAEMON_CONFIG 1203 /* Daemon config change */ - -#define AUDIT_SYSCALL 1300 /* Syscall event */ -/* #define AUDIT_FS_WATCH 1301 * Deprecated */ -#define AUDIT_PATH 1302 /* Filename path information */ -#define AUDIT_IPC 1303 /* IPC record */ -#define AUDIT_SOCKETCALL 1304 /* sys_socketcall arguments */ -#define AUDIT_CONFIG_CHANGE 1305 /* Audit system configuration change */ -#define AUDIT_SOCKADDR 1306 /* sockaddr copied as syscall arg */ -#define AUDIT_CWD 1307 /* Current working directory */ -#define AUDIT_EXECVE 1309 /* execve arguments */ -#define AUDIT_IPC_SET_PERM 1311 /* IPC new permissions record type */ -#define AUDIT_MQ_OPEN 1312 /* POSIX MQ open record type */ -#define AUDIT_MQ_SENDRECV 1313 /* POSIX MQ send/receive record type */ -#define AUDIT_MQ_NOTIFY 1314 /* POSIX MQ notify record type */ -#define AUDIT_MQ_GETSETATTR 1315 /* POSIX MQ get/set attribute record type */ -#define AUDIT_KERNEL_OTHER 1316 /* For use by 3rd party modules */ -#define AUDIT_FD_PAIR 1317 /* audit record for pipe/socketpair */ -#define AUDIT_OBJ_PID 1318 /* ptrace target */ -#define AUDIT_TTY 1319 /* Input on an administrative TTY */ -#define AUDIT_EOE 1320 /* End of multi-record event */ -#define AUDIT_BPRM_FCAPS 1321 /* Information about fcaps increasing perms */ -#define AUDIT_CAPSET 1322 /* Record showing argument to sys_capset */ -#define AUDIT_MMAP 1323 /* Record showing descriptor and flags in mmap */ -#define AUDIT_NETFILTER_PKT 1324 /* Packets traversing netfilter chains */ -#define AUDIT_NETFILTER_CFG 1325 /* Netfilter chain modifications */ - -#define AUDIT_AVC 1400 /* SE Linux avc denial or grant */ -#define AUDIT_SELINUX_ERR 1401 /* Internal SE Linux Errors */ -#define AUDIT_AVC_PATH 1402 /* dentry, vfsmount pair from avc */ -#define AUDIT_MAC_POLICY_LOAD 1403 /* Policy file load */ -#define AUDIT_MAC_STATUS 1404 /* Changed enforcing,permissive,off */ -#define AUDIT_MAC_CONFIG_CHANGE 1405 /* Changes to booleans */ -#define AUDIT_MAC_UNLBL_ALLOW 1406 /* NetLabel: allow unlabeled traffic */ -#define AUDIT_MAC_CIPSOV4_ADD 1407 /* NetLabel: add CIPSOv4 DOI entry */ -#define AUDIT_MAC_CIPSOV4_DEL 1408 /* NetLabel: del CIPSOv4 DOI entry */ -#define AUDIT_MAC_MAP_ADD 1409 /* NetLabel: add LSM domain mapping */ -#define AUDIT_MAC_MAP_DEL 1410 /* NetLabel: del LSM domain mapping */ -#define AUDIT_MAC_IPSEC_ADDSA 1411 /* Not used */ -#define AUDIT_MAC_IPSEC_DELSA 1412 /* Not used */ -#define AUDIT_MAC_IPSEC_ADDSPD 1413 /* Not used */ -#define AUDIT_MAC_IPSEC_DELSPD 1414 /* Not used */ -#define AUDIT_MAC_IPSEC_EVENT 1415 /* Audit an IPSec event */ -#define AUDIT_MAC_UNLBL_STCADD 1416 /* NetLabel: add a static label */ -#define AUDIT_MAC_UNLBL_STCDEL 1417 /* NetLabel: del a static label */ - -#define AUDIT_FIRST_KERN_ANOM_MSG 1700 -#define AUDIT_LAST_KERN_ANOM_MSG 1799 -#define AUDIT_ANOM_PROMISCUOUS 1700 /* Device changed promiscuous mode */ -#define AUDIT_ANOM_ABEND 1701 /* Process ended abnormally */ -#define AUDIT_ANOM_LINK 1702 /* Suspicious use of file links */ -#define AUDIT_INTEGRITY_DATA 1800 /* Data integrity verification */ -#define AUDIT_INTEGRITY_METADATA 1801 /* Metadata integrity verification */ -#define AUDIT_INTEGRITY_STATUS 1802 /* Integrity enable status */ -#define AUDIT_INTEGRITY_HASH 1803 /* Integrity HASH type */ -#define AUDIT_INTEGRITY_PCR 1804 /* PCR invalidation msgs */ -#define AUDIT_INTEGRITY_RULE 1805 /* policy rule */ - -#define AUDIT_KERNEL 2000 /* Asynchronous audit record. NOT A REQUEST. */ - -/* Rule flags */ -#define AUDIT_FILTER_USER 0x00 /* Apply rule to user-generated messages */ -#define AUDIT_FILTER_TASK 0x01 /* Apply rule at task creation (not syscall) */ -#define AUDIT_FILTER_ENTRY 0x02 /* Apply rule at syscall entry */ -#define AUDIT_FILTER_WATCH 0x03 /* Apply rule to file system watches */ -#define AUDIT_FILTER_EXIT 0x04 /* Apply rule at syscall exit */ -#define AUDIT_FILTER_TYPE 0x05 /* Apply rule at audit_log_start */ - -#define AUDIT_NR_FILTERS 6 - -#define AUDIT_FILTER_PREPEND 0x10 /* Prepend to front of list */ - -/* Rule actions */ -#define AUDIT_NEVER 0 /* Do not build context if rule matches */ -#define AUDIT_POSSIBLE 1 /* Build context if rule matches */ -#define AUDIT_ALWAYS 2 /* Generate audit record if rule matches */ - -/* Rule structure sizes -- if these change, different AUDIT_ADD and - * AUDIT_LIST commands must be implemented. */ -#define AUDIT_MAX_FIELDS 64 -#define AUDIT_MAX_KEY_LEN 256 -#define AUDIT_BITMASK_SIZE 64 -#define AUDIT_WORD(nr) ((__u32)((nr)/32)) -#define AUDIT_BIT(nr) (1 << ((nr) - AUDIT_WORD(nr)*32)) - -#define AUDIT_SYSCALL_CLASSES 16 -#define AUDIT_CLASS_DIR_WRITE 0 -#define AUDIT_CLASS_DIR_WRITE_32 1 -#define AUDIT_CLASS_CHATTR 2 -#define AUDIT_CLASS_CHATTR_32 3 -#define AUDIT_CLASS_READ 4 -#define AUDIT_CLASS_READ_32 5 -#define AUDIT_CLASS_WRITE 6 -#define AUDIT_CLASS_WRITE_32 7 -#define AUDIT_CLASS_SIGNAL 8 -#define AUDIT_CLASS_SIGNAL_32 9 - -/* This bitmask is used to validate user input. It represents all bits that - * are currently used in an audit field constant understood by the kernel. - * If you are adding a new #define AUDIT_<whatever>, please ensure that - * AUDIT_UNUSED_BITS is updated if need be. */ -#define AUDIT_UNUSED_BITS 0x07FFFC00 - -/* AUDIT_FIELD_COMPARE rule list */ -#define AUDIT_COMPARE_UID_TO_OBJ_UID 1 -#define AUDIT_COMPARE_GID_TO_OBJ_GID 2 -#define AUDIT_COMPARE_EUID_TO_OBJ_UID 3 -#define AUDIT_COMPARE_EGID_TO_OBJ_GID 4 -#define AUDIT_COMPARE_AUID_TO_OBJ_UID 5 -#define AUDIT_COMPARE_SUID_TO_OBJ_UID 6 -#define AUDIT_COMPARE_SGID_TO_OBJ_GID 7 -#define AUDIT_COMPARE_FSUID_TO_OBJ_UID 8 -#define AUDIT_COMPARE_FSGID_TO_OBJ_GID 9 - -#define AUDIT_COMPARE_UID_TO_AUID 10 -#define AUDIT_COMPARE_UID_TO_EUID 11 -#define AUDIT_COMPARE_UID_TO_FSUID 12 -#define AUDIT_COMPARE_UID_TO_SUID 13 - -#define AUDIT_COMPARE_AUID_TO_FSUID 14 -#define AUDIT_COMPARE_AUID_TO_SUID 15 -#define AUDIT_COMPARE_AUID_TO_EUID 16 - -#define AUDIT_COMPARE_EUID_TO_SUID 17 -#define AUDIT_COMPARE_EUID_TO_FSUID 18 - -#define AUDIT_COMPARE_SUID_TO_FSUID 19 - -#define AUDIT_COMPARE_GID_TO_EGID 20 -#define AUDIT_COMPARE_GID_TO_FSGID 21 -#define AUDIT_COMPARE_GID_TO_SGID 22 - -#define AUDIT_COMPARE_EGID_TO_FSGID 23 -#define AUDIT_COMPARE_EGID_TO_SGID 24 -#define AUDIT_COMPARE_SGID_TO_FSGID 25 - -#define AUDIT_MAX_FIELD_COMPARE AUDIT_COMPARE_SGID_TO_FSGID - -/* Rule fields */ - /* These are useful when checking the - * task structure at task creation time - * (AUDIT_PER_TASK). */ -#define AUDIT_PID 0 -#define AUDIT_UID 1 -#define AUDIT_EUID 2 -#define AUDIT_SUID 3 -#define AUDIT_FSUID 4 -#define AUDIT_GID 5 -#define AUDIT_EGID 6 -#define AUDIT_SGID 7 -#define AUDIT_FSGID 8 -#define AUDIT_LOGINUID 9 -#define AUDIT_PERS 10 -#define AUDIT_ARCH 11 -#define AUDIT_MSGTYPE 12 -#define AUDIT_SUBJ_USER 13 /* security label user */ -#define AUDIT_SUBJ_ROLE 14 /* security label role */ -#define AUDIT_SUBJ_TYPE 15 /* security label type */ -#define AUDIT_SUBJ_SEN 16 /* security label sensitivity label */ -#define AUDIT_SUBJ_CLR 17 /* security label clearance label */ -#define AUDIT_PPID 18 -#define AUDIT_OBJ_USER 19 -#define AUDIT_OBJ_ROLE 20 -#define AUDIT_OBJ_TYPE 21 -#define AUDIT_OBJ_LEV_LOW 22 -#define AUDIT_OBJ_LEV_HIGH 23 - - /* These are ONLY useful when checking - * at syscall exit time (AUDIT_AT_EXIT). */ -#define AUDIT_DEVMAJOR 100 -#define AUDIT_DEVMINOR 101 -#define AUDIT_INODE 102 -#define AUDIT_EXIT 103 -#define AUDIT_SUCCESS 104 /* exit >= 0; value ignored */ -#define AUDIT_WATCH 105 -#define AUDIT_PERM 106 -#define AUDIT_DIR 107 -#define AUDIT_FILETYPE 108 -#define AUDIT_OBJ_UID 109 -#define AUDIT_OBJ_GID 110 -#define AUDIT_FIELD_COMPARE 111 - -#define AUDIT_ARG0 200 -#define AUDIT_ARG1 (AUDIT_ARG0+1) -#define AUDIT_ARG2 (AUDIT_ARG0+2) -#define AUDIT_ARG3 (AUDIT_ARG0+3) - -#define AUDIT_FILTERKEY 210 - -#define AUDIT_NEGATE 0x80000000 - -/* These are the supported operators. - * 4 2 1 8 - * = > < ? - * ---------- - * 0 0 0 0 00 nonsense - * 0 0 0 1 08 & bit mask - * 0 0 1 0 10 < - * 0 1 0 0 20 > - * 0 1 1 0 30 != - * 1 0 0 0 40 = - * 1 0 0 1 48 &= bit test - * 1 0 1 0 50 <= - * 1 1 0 0 60 >= - * 1 1 1 1 78 all operators - */ -#define AUDIT_BIT_MASK 0x08000000 -#define AUDIT_LESS_THAN 0x10000000 -#define AUDIT_GREATER_THAN 0x20000000 -#define AUDIT_NOT_EQUAL 0x30000000 -#define AUDIT_EQUAL 0x40000000 -#define AUDIT_BIT_TEST (AUDIT_BIT_MASK|AUDIT_EQUAL) -#define AUDIT_LESS_THAN_OR_EQUAL (AUDIT_LESS_THAN|AUDIT_EQUAL) -#define AUDIT_GREATER_THAN_OR_EQUAL (AUDIT_GREATER_THAN|AUDIT_EQUAL) -#define AUDIT_OPERATORS (AUDIT_EQUAL|AUDIT_NOT_EQUAL|AUDIT_BIT_MASK) - -enum { - Audit_equal, - Audit_not_equal, - Audit_bitmask, - Audit_bittest, - Audit_lt, - Audit_gt, - Audit_le, - Audit_ge, - Audit_bad -}; - -/* Status symbols */ - /* Mask values */ -#define AUDIT_STATUS_ENABLED 0x0001 -#define AUDIT_STATUS_FAILURE 0x0002 -#define AUDIT_STATUS_PID 0x0004 -#define AUDIT_STATUS_RATE_LIMIT 0x0008 -#define AUDIT_STATUS_BACKLOG_LIMIT 0x0010 - /* Failure-to-log actions */ -#define AUDIT_FAIL_SILENT 0 -#define AUDIT_FAIL_PRINTK 1 -#define AUDIT_FAIL_PANIC 2 - -/* distinguish syscall tables */ -#define __AUDIT_ARCH_64BIT 0x80000000 -#define __AUDIT_ARCH_LE 0x40000000 -#define AUDIT_ARCH_ALPHA (EM_ALPHA|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE) -#define AUDIT_ARCH_ARM (EM_ARM|__AUDIT_ARCH_LE) -#define AUDIT_ARCH_ARMEB (EM_ARM) -#define AUDIT_ARCH_CRIS (EM_CRIS|__AUDIT_ARCH_LE) -#define AUDIT_ARCH_FRV (EM_FRV) -#define AUDIT_ARCH_H8300 (EM_H8_300) -#define AUDIT_ARCH_I386 (EM_386|__AUDIT_ARCH_LE) -#define AUDIT_ARCH_IA64 (EM_IA_64|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE) -#define AUDIT_ARCH_M32R (EM_M32R) -#define AUDIT_ARCH_M68K (EM_68K) -#define AUDIT_ARCH_MIPS (EM_MIPS) -#define AUDIT_ARCH_MIPSEL (EM_MIPS|__AUDIT_ARCH_LE) -#define AUDIT_ARCH_MIPS64 (EM_MIPS|__AUDIT_ARCH_64BIT) -#define AUDIT_ARCH_MIPSEL64 (EM_MIPS|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE) -#define AUDIT_ARCH_OPENRISC (EM_OPENRISC) -#define AUDIT_ARCH_PARISC (EM_PARISC) -#define AUDIT_ARCH_PARISC64 (EM_PARISC|__AUDIT_ARCH_64BIT) -#define AUDIT_ARCH_PPC (EM_PPC) -#define AUDIT_ARCH_PPC64 (EM_PPC64|__AUDIT_ARCH_64BIT) -#define AUDIT_ARCH_S390 (EM_S390) -#define AUDIT_ARCH_S390X (EM_S390|__AUDIT_ARCH_64BIT) -#define AUDIT_ARCH_SH (EM_SH) -#define AUDIT_ARCH_SHEL (EM_SH|__AUDIT_ARCH_LE) -#define AUDIT_ARCH_SH64 (EM_SH|__AUDIT_ARCH_64BIT) -#define AUDIT_ARCH_SHEL64 (EM_SH|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE) -#define AUDIT_ARCH_SPARC (EM_SPARC) -#define AUDIT_ARCH_SPARC64 (EM_SPARCV9|__AUDIT_ARCH_64BIT) -#define AUDIT_ARCH_X86_64 (EM_X86_64|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE) - -#define AUDIT_PERM_EXEC 1 -#define AUDIT_PERM_WRITE 2 -#define AUDIT_PERM_READ 4 -#define AUDIT_PERM_ATTR 8 - -struct audit_status { - __u32 mask; /* Bit mask for valid entries */ - __u32 enabled; /* 1 = enabled, 0 = disabled */ - __u32 failure; /* Failure-to-log action */ - __u32 pid; /* pid of auditd process */ - __u32 rate_limit; /* messages rate limit (per second) */ - __u32 backlog_limit; /* waiting messages limit */ - __u32 lost; /* messages lost */ - __u32 backlog; /* messages waiting in queue */ -}; - -struct audit_tty_status { - __u32 enabled; /* 1 = enabled, 0 = disabled */ -}; - -/* audit_rule_data supports filter rules with both integer and string - * fields. It corresponds with AUDIT_ADD_RULE, AUDIT_DEL_RULE and - * AUDIT_LIST_RULES requests. - */ -struct audit_rule_data { - __u32 flags; /* AUDIT_PER_{TASK,CALL}, AUDIT_PREPEND */ - __u32 action; /* AUDIT_NEVER, AUDIT_POSSIBLE, AUDIT_ALWAYS */ - __u32 field_count; - __u32 mask[AUDIT_BITMASK_SIZE]; /* syscall(s) affected */ - __u32 fields[AUDIT_MAX_FIELDS]; - __u32 values[AUDIT_MAX_FIELDS]; - __u32 fieldflags[AUDIT_MAX_FIELDS]; - __u32 buflen; /* total length of string fields */ - char buf[0]; /* string fields buffer */ -}; - -/* audit_rule is supported to maintain backward compatibility with - * userspace. It supports integer fields only and corresponds to - * AUDIT_ADD, AUDIT_DEL and AUDIT_LIST requests. - */ -struct audit_rule { /* for AUDIT_LIST, AUDIT_ADD, and AUDIT_DEL */ - __u32 flags; /* AUDIT_PER_{TASK,CALL}, AUDIT_PREPEND */ - __u32 action; /* AUDIT_NEVER, AUDIT_POSSIBLE, AUDIT_ALWAYS */ - __u32 field_count; - __u32 mask[AUDIT_BITMASK_SIZE]; - __u32 fields[AUDIT_MAX_FIELDS]; - __u32 values[AUDIT_MAX_FIELDS]; -}; - -#ifdef __KERNEL__ #include <linux/sched.h> +#include <uapi/linux/audit.h> struct audit_sig_info { uid_t uid; @@ -860,4 +482,3 @@ static inline void audit_log_string(struct audit_buffer *ab, const char *buf) } #endif -#endif diff --git a/include/linux/auto_fs.h b/include/linux/auto_fs.h index da64e15004b6..fcd704d354c4 100644 --- a/include/linux/auto_fs.h +++ b/include/linux/auto_fs.h @@ -10,77 +10,11 @@ * * ----------------------------------------------------------------------- */ - #ifndef _LINUX_AUTO_FS_H #define _LINUX_AUTO_FS_H -#include <linux/types.h> -#ifdef __KERNEL__ #include <linux/fs.h> #include <linux/limits.h> #include <linux/ioctl.h> -#else -#include <sys/ioctl.h> -#endif /* __KERNEL__ */ - -/* This file describes autofs v3 */ -#define AUTOFS_PROTO_VERSION 3 - -/* Range of protocol versions defined */ -#define AUTOFS_MAX_PROTO_VERSION AUTOFS_PROTO_VERSION -#define AUTOFS_MIN_PROTO_VERSION AUTOFS_PROTO_VERSION - -/* - * Architectures where both 32- and 64-bit binaries can be executed - * on 64-bit kernels need this. This keeps the structure format - * uniform, and makes sure the wait_queue_token isn't too big to be - * passed back down to the kernel. - * - * This assumes that on these architectures: - * mode 32 bit 64 bit - * ------------------------- - * int 32 bit 32 bit - * long 32 bit 64 bit - * - * If so, 32-bit user-space code should be backwards compatible. - */ - -#if defined(__sparc__) || defined(__mips__) || defined(__x86_64__) \ - || defined(__powerpc__) || defined(__s390__) -typedef unsigned int autofs_wqt_t; -#else -typedef unsigned long autofs_wqt_t; -#endif - -/* Packet types */ -#define autofs_ptype_missing 0 /* Missing entry (mount request) */ -#define autofs_ptype_expire 1 /* Expire entry (umount request) */ - -struct autofs_packet_hdr { - int proto_version; /* Protocol version */ - int type; /* Type of packet */ -}; - -struct autofs_packet_missing { - struct autofs_packet_hdr hdr; - autofs_wqt_t wait_queue_token; - int len; - char name[NAME_MAX+1]; -}; - -/* v3 expire (via ioctl) */ -struct autofs_packet_expire { - struct autofs_packet_hdr hdr; - int len; - char name[NAME_MAX+1]; -}; - -#define AUTOFS_IOC_READY _IO(0x93,0x60) -#define AUTOFS_IOC_FAIL _IO(0x93,0x61) -#define AUTOFS_IOC_CATATONIC _IO(0x93,0x62) -#define AUTOFS_IOC_PROTOVER _IOR(0x93,0x63,int) -#define AUTOFS_IOC_SETTIMEOUT32 _IOWR(0x93,0x64,compat_ulong_t) -#define AUTOFS_IOC_SETTIMEOUT _IOWR(0x93,0x64,unsigned long) -#define AUTOFS_IOC_EXPIRE _IOR(0x93,0x65,struct autofs_packet_expire) - +#include <uapi/linux/auto_fs.h> #endif /* _LINUX_AUTO_FS_H */ diff --git a/include/linux/auxvec.h b/include/linux/auxvec.h index f3b5d4e3a2ac..669fef5c745a 100644 --- a/include/linux/auxvec.h +++ b/include/linux/auxvec.h @@ -1,39 +1,8 @@ #ifndef _LINUX_AUXVEC_H #define _LINUX_AUXVEC_H -#include <asm/auxvec.h> +#include <uapi/linux/auxvec.h> -/* Symbolic values for the entries in the auxiliary table - put on the initial stack */ -#define AT_NULL 0 /* end of vector */ -#define AT_IGNORE 1 /* entry should be ignored */ -#define AT_EXECFD 2 /* file descriptor of program */ -#define AT_PHDR 3 /* program headers for program */ -#define AT_PHENT 4 /* size of program header entry */ -#define AT_PHNUM 5 /* number of program headers */ -#define AT_PAGESZ 6 /* system page size */ -#define AT_BASE 7 /* base address of interpreter */ -#define AT_FLAGS 8 /* flags */ -#define AT_ENTRY 9 /* entry point of program */ -#define AT_NOTELF 10 /* program is not ELF */ -#define AT_UID 11 /* real uid */ -#define AT_EUID 12 /* effective uid */ -#define AT_GID 13 /* real gid */ -#define AT_EGID 14 /* effective gid */ -#define AT_PLATFORM 15 /* string identifying CPU for optimizations */ -#define AT_HWCAP 16 /* arch dependent hints at CPU capabilities */ -#define AT_CLKTCK 17 /* frequency at which times() increments */ -/* AT_* values 18 through 22 are reserved */ -#define AT_SECURE 23 /* secure mode boolean */ -#define AT_BASE_PLATFORM 24 /* string identifying real platform, may - * differ from AT_PLATFORM. */ -#define AT_RANDOM 25 /* address of 16 random bytes */ - -#define AT_EXECFN 31 /* filename of program */ - -#ifdef __KERNEL__ #define AT_VECTOR_SIZE_BASE 19 /* NEW_AUX_ENT entries in auxiliary table */ /* number of "#define AT_.*" above, minus {AT_NULL, AT_IGNORE, AT_NOTELF} */ -#endif - #endif /* _LINUX_AUXVEC_H */ diff --git a/include/linux/binfmts.h b/include/linux/binfmts.h index 26531f32bbb2..cfcc6bfcaec0 100644 --- a/include/linux/binfmts.h +++ b/include/linux/binfmts.h @@ -1,26 +1,10 @@ #ifndef _LINUX_BINFMTS_H #define _LINUX_BINFMTS_H -#include <linux/capability.h> - -struct pt_regs; - -/* - * These are the maximum length and maximum number of strings passed to the - * execve() system call. MAX_ARG_STRLEN is essentially random but serves to - * prevent the kernel from being unduly impacted by misaddressed pointers. - * MAX_ARG_STRINGS is chosen to fit in a signed 32-bit integer. - */ -#define MAX_ARG_STRLEN (PAGE_SIZE * 32) -#define MAX_ARG_STRINGS 0x7FFFFFFF - -/* sizeof(linux_binprm->buf) */ -#define BINPRM_BUF_SIZE 128 - -#ifdef __KERNEL__ #include <linux/sched.h> #include <linux/unistd.h> #include <asm/exec.h> +#include <uapi/linux/binfmts.h> #define CORENAME_MAX_SIZE 128 @@ -141,5 +125,4 @@ extern void free_bprm(struct linux_binprm *); extern void ret_from_kernel_execve(struct pt_regs *normal) __noreturn; #endif -#endif /* __KERNEL__ */ #endif /* _LINUX_BINFMTS_H */ diff --git a/include/linux/blktrace_api.h b/include/linux/blktrace_api.h index 4d1a0748eaf8..7c2e030e72f1 100644 --- a/include/linux/blktrace_api.h +++ b/include/linux/blktrace_api.h @@ -1,150 +1,11 @@ #ifndef BLKTRACE_H #define BLKTRACE_H -#include <linux/types.h> -#ifdef __KERNEL__ #include <linux/blkdev.h> #include <linux/relay.h> #include <linux/compat.h> -#endif - -/* - * Trace categories - */ -enum blktrace_cat { - BLK_TC_READ = 1 << 0, /* reads */ - BLK_TC_WRITE = 1 << 1, /* writes */ - BLK_TC_FLUSH = 1 << 2, /* flush */ - BLK_TC_SYNC = 1 << 3, /* sync IO */ - BLK_TC_SYNCIO = BLK_TC_SYNC, - BLK_TC_QUEUE = 1 << 4, /* queueing/merging */ - BLK_TC_REQUEUE = 1 << 5, /* requeueing */ - BLK_TC_ISSUE = 1 << 6, /* issue */ - BLK_TC_COMPLETE = 1 << 7, /* completions */ - BLK_TC_FS = 1 << 8, /* fs requests */ - BLK_TC_PC = 1 << 9, /* pc requests */ - BLK_TC_NOTIFY = 1 << 10, /* special message */ - BLK_TC_AHEAD = 1 << 11, /* readahead */ - BLK_TC_META = 1 << 12, /* metadata */ - BLK_TC_DISCARD = 1 << 13, /* discard requests */ - BLK_TC_DRV_DATA = 1 << 14, /* binary per-driver data */ - BLK_TC_FUA = 1 << 15, /* fua requests */ - - BLK_TC_END = 1 << 15, /* we've run out of bits! */ -}; - -#define BLK_TC_SHIFT (16) -#define BLK_TC_ACT(act) ((act) << BLK_TC_SHIFT) - -/* - * Basic trace actions - */ -enum blktrace_act { - __BLK_TA_QUEUE = 1, /* queued */ - __BLK_TA_BACKMERGE, /* back merged to existing rq */ - __BLK_TA_FRONTMERGE, /* front merge to existing rq */ - __BLK_TA_GETRQ, /* allocated new request */ - __BLK_TA_SLEEPRQ, /* sleeping on rq allocation */ - __BLK_TA_REQUEUE, /* request requeued */ - __BLK_TA_ISSUE, /* sent to driver */ - __BLK_TA_COMPLETE, /* completed by driver */ - __BLK_TA_PLUG, /* queue was plugged */ - __BLK_TA_UNPLUG_IO, /* queue was unplugged by io */ - __BLK_TA_UNPLUG_TIMER, /* queue was unplugged by timer */ - __BLK_TA_INSERT, /* insert request */ - __BLK_TA_SPLIT, /* bio was split */ - __BLK_TA_BOUNCE, /* bio was bounced */ - __BLK_TA_REMAP, /* bio was remapped */ - __BLK_TA_ABORT, /* request aborted */ - __BLK_TA_DRV_DATA, /* driver-specific binary data */ -}; - -/* - * Notify events. - */ -enum blktrace_notify { - __BLK_TN_PROCESS = 0, /* establish pid/name mapping */ - __BLK_TN_TIMESTAMP, /* include system clock */ - __BLK_TN_MESSAGE, /* Character string message */ -}; - - -/* - * Trace actions in full. Additionally, read or write is masked - */ -#define BLK_TA_QUEUE (__BLK_TA_QUEUE | BLK_TC_ACT(BLK_TC_QUEUE)) -#define BLK_TA_BACKMERGE (__BLK_TA_BACKMERGE | BLK_TC_ACT(BLK_TC_QUEUE)) -#define BLK_TA_FRONTMERGE (__BLK_TA_FRONTMERGE | BLK_TC_ACT(BLK_TC_QUEUE)) -#define BLK_TA_GETRQ (__BLK_TA_GETRQ | BLK_TC_ACT(BLK_TC_QUEUE)) -#define BLK_TA_SLEEPRQ (__BLK_TA_SLEEPRQ | BLK_TC_ACT(BLK_TC_QUEUE)) -#define BLK_TA_REQUEUE (__BLK_TA_REQUEUE | BLK_TC_ACT(BLK_TC_REQUEUE)) -#define BLK_TA_ISSUE (__BLK_TA_ISSUE | BLK_TC_ACT(BLK_TC_ISSUE)) -#define BLK_TA_COMPLETE (__BLK_TA_COMPLETE| BLK_TC_ACT(BLK_TC_COMPLETE)) -#define BLK_TA_PLUG (__BLK_TA_PLUG | BLK_TC_ACT(BLK_TC_QUEUE)) -#define BLK_TA_UNPLUG_IO (__BLK_TA_UNPLUG_IO | BLK_TC_ACT(BLK_TC_QUEUE)) -#define BLK_TA_UNPLUG_TIMER (__BLK_TA_UNPLUG_TIMER | BLK_TC_ACT(BLK_TC_QUEUE)) -#define BLK_TA_INSERT (__BLK_TA_INSERT | BLK_TC_ACT(BLK_TC_QUEUE)) -#define BLK_TA_SPLIT (__BLK_TA_SPLIT) -#define BLK_TA_BOUNCE (__BLK_TA_BOUNCE) -#define BLK_TA_REMAP (__BLK_TA_REMAP | BLK_TC_ACT(BLK_TC_QUEUE)) -#define BLK_TA_ABORT (__BLK_TA_ABORT | BLK_TC_ACT(BLK_TC_QUEUE)) -#define BLK_TA_DRV_DATA (__BLK_TA_DRV_DATA | BLK_TC_ACT(BLK_TC_DRV_DATA)) - -#define BLK_TN_PROCESS (__BLK_TN_PROCESS | BLK_TC_ACT(BLK_TC_NOTIFY)) -#define BLK_TN_TIMESTAMP (__BLK_TN_TIMESTAMP | BLK_TC_ACT(BLK_TC_NOTIFY)) -#define BLK_TN_MESSAGE (__BLK_TN_MESSAGE | BLK_TC_ACT(BLK_TC_NOTIFY)) - -#define BLK_IO_TRACE_MAGIC 0x65617400 -#define BLK_IO_TRACE_VERSION 0x07 - -/* - * The trace itself - */ -struct blk_io_trace { - __u32 magic; /* MAGIC << 8 | version */ - __u32 sequence; /* event number */ - __u64 time; /* in microseconds */ - __u64 sector; /* disk offset */ - __u32 bytes; /* transfer length */ - __u32 action; /* what happened */ - __u32 pid; /* who did it */ - __u32 device; /* device number */ - __u32 cpu; /* on what cpu did it happen */ - __u16 error; /* completion error */ - __u16 pdu_len; /* length of data after this trace */ -}; - -/* - * The remap event - */ -struct blk_io_trace_remap { - __be32 device_from; - __be32 device_to; - __be64 sector_from; -}; - -enum { - Blktrace_setup = 1, - Blktrace_running, - Blktrace_stopped, -}; - -#define BLKTRACE_BDEV_SIZE 32 - -/* - * User setup structure passed with BLKTRACESTART - */ -struct blk_user_trace_setup { - char name[BLKTRACE_BDEV_SIZE]; /* output */ - __u16 act_mask; /* input */ - __u32 buf_size; /* input */ - __u32 buf_nr; /* input */ - __u64 start_lba; - __u64 end_lba; - __u32 pid; -}; +#include <uapi/linux/blktrace_api.h> -#ifdef __KERNEL__ #if defined(CONFIG_BLK_DEV_IO_TRACE) #include <linux/sysfs.h> @@ -250,5 +111,4 @@ extern void blk_fill_rwbs(char *rwbs, u32 rw, int bytes); #endif /* CONFIG_EVENT_TRACING && CONFIG_BLOCK */ -#endif /* __KERNEL__ */ #endif diff --git a/include/linux/bsg.h b/include/linux/bsg.h index ecb4730d0868..7173f6e9d2dd 100644 --- a/include/linux/bsg.h +++ b/include/linux/bsg.h @@ -1,67 +1,8 @@ #ifndef BSG_H #define BSG_H -#include <linux/types.h> +#include <uapi/linux/bsg.h> -#define BSG_PROTOCOL_SCSI 0 - -#define BSG_SUB_PROTOCOL_SCSI_CMD 0 -#define BSG_SUB_PROTOCOL_SCSI_TMF 1 -#define BSG_SUB_PROTOCOL_SCSI_TRANSPORT 2 - -/* - * For flags member below - * sg.h sg_io_hdr also has bits defined for it's flags member. However - * none of these bits are implemented/used by bsg. The bits below are - * allocated to not conflict with sg.h ones anyway. - */ -#define BSG_FLAG_Q_AT_TAIL 0x10 /* default, == 0 at this bit, is Q_AT_HEAD */ - -struct sg_io_v4 { - __s32 guard; /* [i] 'Q' to differentiate from v3 */ - __u32 protocol; /* [i] 0 -> SCSI , .... */ - __u32 subprotocol; /* [i] 0 -> SCSI command, 1 -> SCSI task - management function, .... */ - - __u32 request_len; /* [i] in bytes */ - __u64 request; /* [i], [*i] {SCSI: cdb} */ - __u64 request_tag; /* [i] {SCSI: task tag (only if flagged)} */ - __u32 request_attr; /* [i] {SCSI: task attribute} */ - __u32 request_priority; /* [i] {SCSI: task priority} */ - __u32 request_extra; /* [i] {spare, for padding} */ - __u32 max_response_len; /* [i] in bytes */ - __u64 response; /* [i], [*o] {SCSI: (auto)sense data} */ - - /* "dout_": data out (to device); "din_": data in (from device) */ - __u32 dout_iovec_count; /* [i] 0 -> "flat" dout transfer else - dout_xfer points to array of iovec */ - __u32 dout_xfer_len; /* [i] bytes to be transferred to device */ - __u32 din_iovec_count; /* [i] 0 -> "flat" din transfer */ - __u32 din_xfer_len; /* [i] bytes to be transferred from device */ - __u64 dout_xferp; /* [i], [*i] */ - __u64 din_xferp; /* [i], [*o] */ - - __u32 timeout; /* [i] units: millisecond */ - __u32 flags; /* [i] bit mask */ - __u64 usr_ptr; /* [i->o] unused internally */ - __u32 spare_in; /* [i] */ - - __u32 driver_status; /* [o] 0 -> ok */ - __u32 transport_status; /* [o] 0 -> ok */ - __u32 device_status; /* [o] {SCSI: command completion status} */ - __u32 retry_delay; /* [o] {SCSI: status auxiliary information} */ - __u32 info; /* [o] additional information */ - __u32 duration; /* [o] time to complete, in milliseconds */ - __u32 response_len; /* [o] bytes of response actually written */ - __s32 din_resid; /* [o] din_xfer_len - actual_din_xfer_len */ - __s32 dout_resid; /* [o] dout_xfer_len - actual_dout_xfer_len */ - __u64 generated_tag; /* [o] {SCSI: transport generated task tag} */ - __u32 spare_out; /* [o] */ - - __u32 padding; -}; - -#ifdef __KERNEL__ #if defined(CONFIG_BLK_DEV_BSG) struct bsg_class_device { @@ -89,6 +30,4 @@ static inline void bsg_unregister_queue(struct request_queue *q) } #endif -#endif /* __KERNEL__ */ - #endif diff --git a/include/linux/capability.h b/include/linux/capability.h index d10b7ed595b1..98503b792369 100644 --- a/include/linux/capability.h +++ b/include/linux/capability.h @@ -9,82 +9,11 @@ * * ftp://www.kernel.org/pub/linux/libs/security/linux-privs/kernel-2.6/ */ - #ifndef _LINUX_CAPABILITY_H #define _LINUX_CAPABILITY_H -#include <linux/types.h> - -struct task_struct; - -/* User-level do most of the mapping between kernel and user - capabilities based on the version tag given by the kernel. The - kernel might be somewhat backwards compatible, but don't bet on - it. */ - -/* Note, cap_t, is defined by POSIX (draft) to be an "opaque" pointer to - a set of three capability sets. The transposition of 3*the - following structure to such a composite is better handled in a user - library since the draft standard requires the use of malloc/free - etc.. */ - -#define _LINUX_CAPABILITY_VERSION_1 0x19980330 -#define _LINUX_CAPABILITY_U32S_1 1 - -#define _LINUX_CAPABILITY_VERSION_2 0x20071026 /* deprecated - use v3 */ -#define _LINUX_CAPABILITY_U32S_2 2 - -#define _LINUX_CAPABILITY_VERSION_3 0x20080522 -#define _LINUX_CAPABILITY_U32S_3 2 - -typedef struct __user_cap_header_struct { - __u32 version; - int pid; -} __user *cap_user_header_t; - -typedef struct __user_cap_data_struct { - __u32 effective; - __u32 permitted; - __u32 inheritable; -} __user *cap_user_data_t; - - -#define VFS_CAP_REVISION_MASK 0xFF000000 -#define VFS_CAP_REVISION_SHIFT 24 -#define VFS_CAP_FLAGS_MASK ~VFS_CAP_REVISION_MASK -#define VFS_CAP_FLAGS_EFFECTIVE 0x000001 - -#define VFS_CAP_REVISION_1 0x01000000 -#define VFS_CAP_U32_1 1 -#define XATTR_CAPS_SZ_1 (sizeof(__le32)*(1 + 2*VFS_CAP_U32_1)) - -#define VFS_CAP_REVISION_2 0x02000000 -#define VFS_CAP_U32_2 2 -#define XATTR_CAPS_SZ_2 (sizeof(__le32)*(1 + 2*VFS_CAP_U32_2)) +#include <uapi/linux/capability.h> -#define XATTR_CAPS_SZ XATTR_CAPS_SZ_2 -#define VFS_CAP_U32 VFS_CAP_U32_2 -#define VFS_CAP_REVISION VFS_CAP_REVISION_2 - -struct vfs_cap_data { - __le32 magic_etc; /* Little endian */ - struct { - __le32 permitted; /* Little endian */ - __le32 inheritable; /* Little endian */ - } data[VFS_CAP_U32]; -}; - -#ifndef __KERNEL__ - -/* - * Backwardly compatible definition for source code - trapped in a - * 32-bit world. If you find you need this, please consider using - * libcap to untrap yourself... - */ -#define _LINUX_CAPABILITY_VERSION _LINUX_CAPABILITY_VERSION_1 -#define _LINUX_CAPABILITY_U32S _LINUX_CAPABILITY_U32S_1 - -#else #define _KERNEL_CAPABILITY_VERSION _LINUX_CAPABILITY_VERSION_3 #define _KERNEL_CAPABILITY_U32S _LINUX_CAPABILITY_U32S_3 @@ -105,277 +34,6 @@ struct cpu_vfs_cap_data { #define _USER_CAP_HEADER_SIZE (sizeof(struct __user_cap_header_struct)) #define _KERNEL_CAP_T_SIZE (sizeof(kernel_cap_t)) -#endif - - -/** - ** POSIX-draft defined capabilities. - **/ - -/* In a system with the [_POSIX_CHOWN_RESTRICTED] option defined, this - overrides the restriction of changing file ownership and group - ownership. */ - -#define CAP_CHOWN 0 - -/* Override all DAC access, including ACL execute access if - [_POSIX_ACL] is defined. Excluding DAC access covered by - CAP_LINUX_IMMUTABLE. */ - -#define CAP_DAC_OVERRIDE 1 - -/* Overrides all DAC restrictions regarding read and search on files - and directories, including ACL restrictions if [_POSIX_ACL] is - defined. Excluding DAC access covered by CAP_LINUX_IMMUTABLE. */ - -#define CAP_DAC_READ_SEARCH 2 - -/* Overrides all restrictions about allowed operations on files, where - file owner ID must be equal to the user ID, except where CAP_FSETID - is applicable. It doesn't override MAC and DAC restrictions. */ - -#define CAP_FOWNER 3 - -/* Overrides the following restrictions that the effective user ID - shall match the file owner ID when setting the S_ISUID and S_ISGID - bits on that file; that the effective group ID (or one of the - supplementary group IDs) shall match the file owner ID when setting - the S_ISGID bit on that file; that the S_ISUID and S_ISGID bits are - cleared on successful return from chown(2) (not implemented). */ - -#define CAP_FSETID 4 - -/* Overrides the restriction that the real or effective user ID of a - process sending a signal must match the real or effective user ID - of the process receiving the signal. */ - -#define CAP_KILL 5 - -/* Allows setgid(2) manipulation */ -/* Allows setgroups(2) */ -/* Allows forged gids on socket credentials passing. */ - -#define CAP_SETGID 6 - -/* Allows set*uid(2) manipulation (including fsuid). */ -/* Allows forged pids on socket credentials passing. */ - -#define CAP_SETUID 7 - - -/** - ** Linux-specific capabilities - **/ - -/* Without VFS support for capabilities: - * Transfer any capability in your permitted set to any pid, - * remove any capability in your permitted set from any pid - * With VFS support for capabilities (neither of above, but) - * Add any capability from current's capability bounding set - * to the current process' inheritable set - * Allow taking bits out of capability bounding set - * Allow modification of the securebits for a process - */ - -#define CAP_SETPCAP 8 - -/* Allow modification of S_IMMUTABLE and S_APPEND file attributes */ - -#define CAP_LINUX_IMMUTABLE 9 - -/* Allows binding to TCP/UDP sockets below 1024 */ -/* Allows binding to ATM VCIs below 32 */ - -#define CAP_NET_BIND_SERVICE 10 - -/* Allow broadcasting, listen to multicast */ - -#define CAP_NET_BROADCAST 11 - -/* Allow interface configuration */ -/* Allow administration of IP firewall, masquerading and accounting */ -/* Allow setting debug option on sockets */ -/* Allow modification of routing tables */ -/* Allow setting arbitrary process / process group ownership on - sockets */ -/* Allow binding to any address for transparent proxying (also via NET_RAW) */ -/* Allow setting TOS (type of service) */ -/* Allow setting promiscuous mode */ -/* Allow clearing driver statistics */ -/* Allow multicasting */ -/* Allow read/write of device-specific registers */ -/* Allow activation of ATM control sockets */ - -#define CAP_NET_ADMIN 12 - -/* Allow use of RAW sockets */ -/* Allow use of PACKET sockets */ -/* Allow binding to any address for transparent proxying (also via NET_ADMIN) */ - -#define CAP_NET_RAW 13 - -/* Allow locking of shared memory segments */ -/* Allow mlock and mlockall (which doesn't really have anything to do - with IPC) */ - -#define CAP_IPC_LOCK 14 - -/* Override IPC ownership checks */ - -#define CAP_IPC_OWNER 15 - -/* Insert and remove kernel modules - modify kernel without limit */ -#define CAP_SYS_MODULE 16 - -/* Allow ioperm/iopl access */ -/* Allow sending USB messages to any device via /proc/bus/usb */ - -#define CAP_SYS_RAWIO 17 - -/* Allow use of chroot() */ - -#define CAP_SYS_CHROOT 18 - -/* Allow ptrace() of any process */ - -#define CAP_SYS_PTRACE 19 - -/* Allow configuration of process accounting */ - -#define CAP_SYS_PACCT 20 - -/* Allow configuration of the secure attention key */ -/* Allow administration of the random device */ -/* Allow examination and configuration of disk quotas */ -/* Allow setting the domainname */ -/* Allow setting the hostname */ -/* Allow calling bdflush() */ -/* Allow mount() and umount(), setting up new smb connection */ -/* Allow some autofs root ioctls */ -/* Allow nfsservctl */ -/* Allow VM86_REQUEST_IRQ */ -/* Allow to read/write pci config on alpha */ -/* Allow irix_prctl on mips (setstacksize) */ -/* Allow flushing all cache on m68k (sys_cacheflush) */ -/* Allow removing semaphores */ -/* Used instead of CAP_CHOWN to "chown" IPC message queues, semaphores - and shared memory */ -/* Allow locking/unlocking of shared memory segment */ -/* Allow turning swap on/off */ -/* Allow forged pids on socket credentials passing */ -/* Allow setting readahead and flushing buffers on block devices */ -/* Allow setting geometry in floppy driver */ -/* Allow turning DMA on/off in xd driver */ -/* Allow administration of md devices (mostly the above, but some - extra ioctls) */ -/* Allow tuning the ide driver */ -/* Allow access to the nvram device */ -/* Allow administration of apm_bios, serial and bttv (TV) device */ -/* Allow manufacturer commands in isdn CAPI support driver */ -/* Allow reading non-standardized portions of pci configuration space */ -/* Allow DDI debug ioctl on sbpcd driver */ -/* Allow setting up serial ports */ -/* Allow sending raw qic-117 commands */ -/* Allow enabling/disabling tagged queuing on SCSI controllers and sending - arbitrary SCSI commands */ -/* Allow setting encryption key on loopback filesystem */ -/* Allow setting zone reclaim policy */ - -#define CAP_SYS_ADMIN 21 - -/* Allow use of reboot() */ - -#define CAP_SYS_BOOT 22 - -/* Allow raising priority and setting priority on other (different - UID) processes */ -/* Allow use of FIFO and round-robin (realtime) scheduling on own - processes and setting the scheduling algorithm used by another - process. */ -/* Allow setting cpu affinity on other processes */ - -#define CAP_SYS_NICE 23 - -/* Override resource limits. Set resource limits. */ -/* Override quota limits. */ -/* Override reserved space on ext2 filesystem */ -/* Modify data journaling mode on ext3 filesystem (uses journaling - resources) */ -/* NOTE: ext2 honors fsuid when checking for resource overrides, so - you can override using fsuid too */ -/* Override size restrictions on IPC message queues */ -/* Allow more than 64hz interrupts from the real-time clock */ -/* Override max number of consoles on console allocation */ -/* Override max number of keymaps */ - -#define CAP_SYS_RESOURCE 24 - -/* Allow manipulation of system clock */ -/* Allow irix_stime on mips */ -/* Allow setting the real-time clock */ - -#define CAP_SYS_TIME 25 - -/* Allow configuration of tty devices */ -/* Allow vhangup() of tty */ - -#define CAP_SYS_TTY_CONFIG 26 - -/* Allow the privileged aspects of mknod() */ - -#define CAP_MKNOD 27 - -/* Allow taking of leases on files */ - -#define CAP_LEASE 28 - -#define CAP_AUDIT_WRITE 29 - -#define CAP_AUDIT_CONTROL 30 - -#define CAP_SETFCAP 31 - -/* Override MAC access. - The base kernel enforces no MAC policy. - An LSM may enforce a MAC policy, and if it does and it chooses - to implement capability based overrides of that policy, this is - the capability it should use to do so. */ - -#define CAP_MAC_OVERRIDE 32 - -/* Allow MAC configuration or state changes. - The base kernel requires no MAC configuration. - An LSM may enforce a MAC policy, and if it does and it chooses - to implement capability based checks on modifications to that - policy or the data required to maintain it, this is the - capability it should use to do so. */ - -#define CAP_MAC_ADMIN 33 - -/* Allow configuring the kernel's syslog (printk behaviour) */ - -#define CAP_SYSLOG 34 - -/* Allow triggering something that will wake the system */ - -#define CAP_WAKE_ALARM 35 - -/* Allow preventing system suspends */ - -#define CAP_BLOCK_SUSPEND 36 - -#define CAP_LAST_CAP CAP_BLOCK_SUSPEND - -#define cap_valid(x) ((x) >= 0 && (x) <= CAP_LAST_CAP) - -/* - * Bit location of each capability (used by user-space library and kernel) - */ - -#define CAP_TO_INDEX(x) ((x) >> 5) /* 1 << 5 == bits in __u32 */ -#define CAP_TO_MASK(x) (1 << ((x) & 31)) /* mask for indexed __u32 */ - -#ifdef __KERNEL__ struct inode; struct dentry; @@ -557,6 +215,4 @@ extern bool inode_capable(const struct inode *inode, int cap); /* audit system wants to get cap info from files as well */ extern int get_vfs_caps_from_disk(const struct dentry *dentry, struct cpu_vfs_cap_data *cpu_caps); -#endif /* __KERNEL__ */ - #endif /* !_LINUX_CAPABILITY_H */ diff --git a/include/linux/cciss_ioctl.h b/include/linux/cciss_ioctl.h index 986493f5b92b..84b6e2d0f44d 100644 --- a/include/linux/cciss_ioctl.h +++ b/include/linux/cciss_ioctl.h @@ -1,91 +1,8 @@ #ifndef CCISS_IOCTLH #define CCISS_IOCTLH -#include <linux/types.h> -#include <linux/ioctl.h> -#include <linux/cciss_defs.h> +#include <uapi/linux/cciss_ioctl.h> -#define CCISS_IOC_MAGIC 'B' - - -typedef struct _cciss_pci_info_struct -{ - unsigned char bus; - unsigned char dev_fn; - unsigned short domain; - __u32 board_id; -} cciss_pci_info_struct; - -typedef struct _cciss_coalint_struct -{ - __u32 delay; - __u32 count; -} cciss_coalint_struct; - -typedef char NodeName_type[16]; - -typedef __u32 Heartbeat_type; - -#define CISS_PARSCSIU2 0x0001 -#define CISS_PARCSCIU3 0x0002 -#define CISS_FIBRE1G 0x0100 -#define CISS_FIBRE2G 0x0200 -typedef __u32 BusTypes_type; - -typedef char FirmwareVer_type[4]; -typedef __u32 DriverVer_type; - -#define MAX_KMALLOC_SIZE 128000 - -typedef struct _IOCTL_Command_struct { - LUNAddr_struct LUN_info; - RequestBlock_struct Request; - ErrorInfo_struct error_info; - WORD buf_size; /* size in bytes of the buf */ - BYTE __user *buf; -} IOCTL_Command_struct; - -typedef struct _BIG_IOCTL_Command_struct { - LUNAddr_struct LUN_info; - RequestBlock_struct Request; - ErrorInfo_struct error_info; - DWORD malloc_size; /* < MAX_KMALLOC_SIZE in cciss.c */ - DWORD buf_size; /* size in bytes of the buf */ - /* < malloc_size * MAXSGENTRIES */ - BYTE __user *buf; -} BIG_IOCTL_Command_struct; - -typedef struct _LogvolInfo_struct{ - __u32 LunID; - int num_opens; /* number of opens on the logical volume */ - int num_parts; /* number of partitions configured on logvol */ -} LogvolInfo_struct; - -#define CCISS_GETPCIINFO _IOR(CCISS_IOC_MAGIC, 1, cciss_pci_info_struct) - -#define CCISS_GETINTINFO _IOR(CCISS_IOC_MAGIC, 2, cciss_coalint_struct) -#define CCISS_SETINTINFO _IOW(CCISS_IOC_MAGIC, 3, cciss_coalint_struct) - -#define CCISS_GETNODENAME _IOR(CCISS_IOC_MAGIC, 4, NodeName_type) -#define CCISS_SETNODENAME _IOW(CCISS_IOC_MAGIC, 5, NodeName_type) - -#define CCISS_GETHEARTBEAT _IOR(CCISS_IOC_MAGIC, 6, Heartbeat_type) -#define CCISS_GETBUSTYPES _IOR(CCISS_IOC_MAGIC, 7, BusTypes_type) -#define CCISS_GETFIRMVER _IOR(CCISS_IOC_MAGIC, 8, FirmwareVer_type) -#define CCISS_GETDRIVVER _IOR(CCISS_IOC_MAGIC, 9, DriverVer_type) -#define CCISS_REVALIDVOLS _IO(CCISS_IOC_MAGIC, 10) -#define CCISS_PASSTHRU _IOWR(CCISS_IOC_MAGIC, 11, IOCTL_Command_struct) -#define CCISS_DEREGDISK _IO(CCISS_IOC_MAGIC, 12) - -/* no longer used... use REGNEWD instead */ -#define CCISS_REGNEWDISK _IOW(CCISS_IOC_MAGIC, 13, int) - -#define CCISS_REGNEWD _IO(CCISS_IOC_MAGIC, 14) -#define CCISS_RESCANDISK _IO(CCISS_IOC_MAGIC, 16) -#define CCISS_GETLUNINFO _IOR(CCISS_IOC_MAGIC, 17, LogvolInfo_struct) -#define CCISS_BIG_PASSTHRU _IOWR(CCISS_IOC_MAGIC, 18, BIG_IOCTL_Command_struct) - -#ifdef __KERNEL__ #ifdef CONFIG_COMPAT /* 32 bit compatible ioctl structs */ @@ -111,5 +28,4 @@ typedef struct _BIG_IOCTL32_Command_struct { #define CCISS_BIG_PASSTHRU32 _IOWR(CCISS_IOC_MAGIC, 18, BIG_IOCTL32_Command_struct) #endif /* CONFIG_COMPAT */ -#endif /* __KERNEL__ */ #endif diff --git a/include/linux/cdrom.h b/include/linux/cdrom.h index dfd7f187c351..8609d577bb66 100644 --- a/include/linux/cdrom.h +++ b/include/linux/cdrom.h @@ -7,910 +7,12 @@ * 1997, 1998 Erik Andersen, andersee@debian.org * 1998-2002 Jens Axboe, axboe@suse.de */ - #ifndef _LINUX_CDROM_H #define _LINUX_CDROM_H -#include <linux/types.h> -#include <asm/byteorder.h> - -/******************************************************* - * As of Linux 2.1.x, all Linux CD-ROM application programs will use this - * (and only this) include file. It is my hope to provide Linux with - * a uniform interface between software accessing CD-ROMs and the various - * device drivers that actually talk to the drives. There may still be - * 23 different kinds of strange CD-ROM drives, but at least there will - * now be one, and only one, Linux CD-ROM interface. - * - * Additionally, as of Linux 2.1.x, all Linux application programs - * should use the O_NONBLOCK option when opening a CD-ROM device - * for subsequent ioctl commands. This allows for neat system errors - * like "No medium found" or "Wrong medium type" upon attempting to - * mount or play an empty slot, mount an audio disc, or play a data disc. - * Generally, changing an application program to support O_NONBLOCK - * is as easy as the following: - * - drive = open("/dev/cdrom", O_RDONLY); - * + drive = open("/dev/cdrom", O_RDONLY | O_NONBLOCK); - * It is worth the small change. - * - * Patches for many common CD programs (provided by David A. van Leeuwen) - * can be found at: ftp://ftp.gwdg.de/pub/linux/cdrom/drivers/cm206/ - * - *******************************************************/ - -/* When a driver supports a certain function, but the cdrom drive we are - * using doesn't, we will return the error EDRIVE_CANT_DO_THIS. We will - * borrow the "Operation not supported" error from the network folks to - * accomplish this. Maybe someday we will get a more targeted error code, - * but this will do for now... */ -#define EDRIVE_CANT_DO_THIS EOPNOTSUPP - -/******************************************************* - * The CD-ROM IOCTL commands -- these should be supported by - * all the various cdrom drivers. For the CD-ROM ioctls, we - * will commandeer byte 0x53, or 'S'. - *******************************************************/ -#define CDROMPAUSE 0x5301 /* Pause Audio Operation */ -#define CDROMRESUME 0x5302 /* Resume paused Audio Operation */ -#define CDROMPLAYMSF 0x5303 /* Play Audio MSF (struct cdrom_msf) */ -#define CDROMPLAYTRKIND 0x5304 /* Play Audio Track/index - (struct cdrom_ti) */ -#define CDROMREADTOCHDR 0x5305 /* Read TOC header - (struct cdrom_tochdr) */ -#define CDROMREADTOCENTRY 0x5306 /* Read TOC entry - (struct cdrom_tocentry) */ -#define CDROMSTOP 0x5307 /* Stop the cdrom drive */ -#define CDROMSTART 0x5308 /* Start the cdrom drive */ -#define CDROMEJECT 0x5309 /* Ejects the cdrom media */ -#define CDROMVOLCTRL 0x530a /* Control output volume - (struct cdrom_volctrl) */ -#define CDROMSUBCHNL 0x530b /* Read subchannel data - (struct cdrom_subchnl) */ -#define CDROMREADMODE2 0x530c /* Read CDROM mode 2 data (2336 Bytes) - (struct cdrom_read) */ -#define CDROMREADMODE1 0x530d /* Read CDROM mode 1 data (2048 Bytes) - (struct cdrom_read) */ -#define CDROMREADAUDIO 0x530e /* (struct cdrom_read_audio) */ -#define CDROMEJECT_SW 0x530f /* enable(1)/disable(0) auto-ejecting */ -#define CDROMMULTISESSION 0x5310 /* Obtain the start-of-last-session - address of multi session disks - (struct cdrom_multisession) */ -#define CDROM_GET_MCN 0x5311 /* Obtain the "Universal Product Code" - if available (struct cdrom_mcn) */ -#define CDROM_GET_UPC CDROM_GET_MCN /* This one is deprecated, - but here anyway for compatibility */ -#define CDROMRESET 0x5312 /* hard-reset the drive */ -#define CDROMVOLREAD 0x5313 /* Get the drive's volume setting - (struct cdrom_volctrl) */ -#define CDROMREADRAW 0x5314 /* read data in raw mode (2352 Bytes) - (struct cdrom_read) */ -/* - * These ioctls are used only used in aztcd.c and optcd.c - */ -#define CDROMREADCOOKED 0x5315 /* read data in cooked mode */ -#define CDROMSEEK 0x5316 /* seek msf address */ - -/* - * This ioctl is only used by the scsi-cd driver. - It is for playing audio in logical block addressing mode. - */ -#define CDROMPLAYBLK 0x5317 /* (struct cdrom_blk) */ - -/* - * These ioctls are only used in optcd.c - */ -#define CDROMREADALL 0x5318 /* read all 2646 bytes */ - -/* - * These ioctls are (now) only in ide-cd.c for controlling - * drive spindown time. They should be implemented in the - * Uniform driver, via generic packet commands, GPCMD_MODE_SELECT_10, - * GPCMD_MODE_SENSE_10 and the GPMODE_POWER_PAGE... - * -Erik - */ -#define CDROMGETSPINDOWN 0x531d -#define CDROMSETSPINDOWN 0x531e - -/* - * These ioctls are implemented through the uniform CD-ROM driver - * They _will_ be adopted by all CD-ROM drivers, when all the CD-ROM - * drivers are eventually ported to the uniform CD-ROM driver interface. - */ -#define CDROMCLOSETRAY 0x5319 /* pendant of CDROMEJECT */ -#define CDROM_SET_OPTIONS 0x5320 /* Set behavior options */ -#define CDROM_CLEAR_OPTIONS 0x5321 /* Clear behavior options */ -#define CDROM_SELECT_SPEED 0x5322 /* Set the CD-ROM speed */ -#define CDROM_SELECT_DISC 0x5323 /* Select disc (for juke-boxes) */ -#define CDROM_MEDIA_CHANGED 0x5325 /* Check is media changed */ -#define CDROM_DRIVE_STATUS 0x5326 /* Get tray position, etc. */ -#define CDROM_DISC_STATUS 0x5327 /* Get disc type, etc. */ -#define CDROM_CHANGER_NSLOTS 0x5328 /* Get number of slots */ -#define CDROM_LOCKDOOR 0x5329 /* lock or unlock door */ -#define CDROM_DEBUG 0x5330 /* Turn debug messages on/off */ -#define CDROM_GET_CAPABILITY 0x5331 /* get capabilities */ - -/* Note that scsi/scsi_ioctl.h also uses 0x5382 - 0x5386. - * Future CDROM ioctls should be kept below 0x537F - */ - -/* This ioctl is only used by sbpcd at the moment */ -#define CDROMAUDIOBUFSIZ 0x5382 /* set the audio buffer size */ - /* conflict with SCSI_IOCTL_GET_IDLUN */ - -/* DVD-ROM Specific ioctls */ -#define DVD_READ_STRUCT 0x5390 /* Read structure */ -#define DVD_WRITE_STRUCT 0x5391 /* Write structure */ -#define DVD_AUTH 0x5392 /* Authentication */ - -#define CDROM_SEND_PACKET 0x5393 /* send a packet to the drive */ -#define CDROM_NEXT_WRITABLE 0x5394 /* get next writable block */ -#define CDROM_LAST_WRITTEN 0x5395 /* get last block written on disc */ - -/******************************************************* - * CDROM IOCTL structures - *******************************************************/ - -/* Address in MSF format */ -struct cdrom_msf0 -{ - __u8 minute; - __u8 second; - __u8 frame; -}; - -/* Address in either MSF or logical format */ -union cdrom_addr -{ - struct cdrom_msf0 msf; - int lba; -}; - -/* This struct is used by the CDROMPLAYMSF ioctl */ -struct cdrom_msf -{ - __u8 cdmsf_min0; /* start minute */ - __u8 cdmsf_sec0; /* start second */ - __u8 cdmsf_frame0; /* start frame */ - __u8 cdmsf_min1; /* end minute */ - __u8 cdmsf_sec1; /* end second */ - __u8 cdmsf_frame1; /* end frame */ -}; - -/* This struct is used by the CDROMPLAYTRKIND ioctl */ -struct cdrom_ti -{ - __u8 cdti_trk0; /* start track */ - __u8 cdti_ind0; /* start index */ - __u8 cdti_trk1; /* end track */ - __u8 cdti_ind1; /* end index */ -}; - -/* This struct is used by the CDROMREADTOCHDR ioctl */ -struct cdrom_tochdr -{ - __u8 cdth_trk0; /* start track */ - __u8 cdth_trk1; /* end track */ -}; - -/* This struct is used by the CDROMVOLCTRL and CDROMVOLREAD ioctls */ -struct cdrom_volctrl -{ - __u8 channel0; - __u8 channel1; - __u8 channel2; - __u8 channel3; -}; - -/* This struct is used by the CDROMSUBCHNL ioctl */ -struct cdrom_subchnl -{ - __u8 cdsc_format; - __u8 cdsc_audiostatus; - __u8 cdsc_adr: 4; - __u8 cdsc_ctrl: 4; - __u8 cdsc_trk; - __u8 cdsc_ind; - union cdrom_addr cdsc_absaddr; - union cdrom_addr cdsc_reladdr; -}; - - -/* This struct is used by the CDROMREADTOCENTRY ioctl */ -struct cdrom_tocentry -{ - __u8 cdte_track; - __u8 cdte_adr :4; - __u8 cdte_ctrl :4; - __u8 cdte_format; - union cdrom_addr cdte_addr; - __u8 cdte_datamode; -}; - -/* This struct is used by the CDROMREADMODE1, and CDROMREADMODE2 ioctls */ -struct cdrom_read -{ - int cdread_lba; - char *cdread_bufaddr; - int cdread_buflen; -}; - -/* This struct is used by the CDROMREADAUDIO ioctl */ -struct cdrom_read_audio -{ - union cdrom_addr addr; /* frame address */ - __u8 addr_format; /* CDROM_LBA or CDROM_MSF */ - int nframes; /* number of 2352-byte-frames to read at once */ - __u8 __user *buf; /* frame buffer (size: nframes*2352 bytes) */ -}; - -/* This struct is used with the CDROMMULTISESSION ioctl */ -struct cdrom_multisession -{ - union cdrom_addr addr; /* frame address: start-of-last-session - (not the new "frame 16"!). Only valid - if the "xa_flag" is true. */ - __u8 xa_flag; /* 1: "is XA disk" */ - __u8 addr_format; /* CDROM_LBA or CDROM_MSF */ -}; - -/* This struct is used with the CDROM_GET_MCN ioctl. - * Very few audio discs actually have Universal Product Code information, - * which should just be the Medium Catalog Number on the box. Also note - * that the way the codeis written on CD is _not_ uniform across all discs! - */ -struct cdrom_mcn -{ - __u8 medium_catalog_number[14]; /* 13 ASCII digits, null-terminated */ -}; - -/* This is used by the CDROMPLAYBLK ioctl */ -struct cdrom_blk -{ - unsigned from; - unsigned short len; -}; - -#define CDROM_PACKET_SIZE 12 - -#define CGC_DATA_UNKNOWN 0 -#define CGC_DATA_WRITE 1 -#define CGC_DATA_READ 2 -#define CGC_DATA_NONE 3 - -/* for CDROM_PACKET_COMMAND ioctl */ -struct cdrom_generic_command -{ - unsigned char cmd[CDROM_PACKET_SIZE]; - unsigned char __user *buffer; - unsigned int buflen; - int stat; - struct request_sense __user *sense; - unsigned char data_direction; - int quiet; - int timeout; - void __user *reserved[1]; /* unused, actually */ -}; - -/* - * A CD-ROM physical sector size is 2048, 2052, 2056, 2324, 2332, 2336, - * 2340, or 2352 bytes long. - -* Sector types of the standard CD-ROM data formats: - * - * format sector type user data size (bytes) - * ----------------------------------------------------------------------------- - * 1 (Red Book) CD-DA 2352 (CD_FRAMESIZE_RAW) - * 2 (Yellow Book) Mode1 Form1 2048 (CD_FRAMESIZE) - * 3 (Yellow Book) Mode1 Form2 2336 (CD_FRAMESIZE_RAW0) - * 4 (Green Book) Mode2 Form1 2048 (CD_FRAMESIZE) - * 5 (Green Book) Mode2 Form2 2328 (2324+4 spare bytes) - * - * - * The layout of the standard CD-ROM data formats: - * ----------------------------------------------------------------------------- - * - audio (red): | audio_sample_bytes | - * | 2352 | - * - * - data (yellow, mode1): | sync - head - data - EDC - zero - ECC | - * | 12 - 4 - 2048 - 4 - 8 - 276 | - * - * - data (yellow, mode2): | sync - head - data | - * | 12 - 4 - 2336 | - * - * - XA data (green, mode2 form1): | sync - head - sub - data - EDC - ECC | - * | 12 - 4 - 8 - 2048 - 4 - 276 | - * - * - XA data (green, mode2 form2): | sync - head - sub - data - Spare | - * | 12 - 4 - 8 - 2324 - 4 | - * - */ - -/* Some generally useful CD-ROM information -- mostly based on the above */ -#define CD_MINS 74 /* max. minutes per CD, not really a limit */ -#define CD_SECS 60 /* seconds per minute */ -#define CD_FRAMES 75 /* frames per second */ -#define CD_SYNC_SIZE 12 /* 12 sync bytes per raw data frame */ -#define CD_MSF_OFFSET 150 /* MSF numbering offset of first frame */ -#define CD_CHUNK_SIZE 24 /* lowest-level "data bytes piece" */ -#define CD_NUM_OF_CHUNKS 98 /* chunks per frame */ -#define CD_FRAMESIZE_SUB 96 /* subchannel data "frame" size */ -#define CD_HEAD_SIZE 4 /* header (address) bytes per raw data frame */ -#define CD_SUBHEAD_SIZE 8 /* subheader bytes per raw XA data frame */ -#define CD_EDC_SIZE 4 /* bytes EDC per most raw data frame types */ -#define CD_ZERO_SIZE 8 /* bytes zero per yellow book mode 1 frame */ -#define CD_ECC_SIZE 276 /* bytes ECC per most raw data frame types */ -#define CD_FRAMESIZE 2048 /* bytes per frame, "cooked" mode */ -#define CD_FRAMESIZE_RAW 2352 /* bytes per frame, "raw" mode */ -#define CD_FRAMESIZE_RAWER 2646 /* The maximum possible returned bytes */ -/* most drives don't deliver everything: */ -#define CD_FRAMESIZE_RAW1 (CD_FRAMESIZE_RAW-CD_SYNC_SIZE) /*2340*/ -#define CD_FRAMESIZE_RAW0 (CD_FRAMESIZE_RAW-CD_SYNC_SIZE-CD_HEAD_SIZE) /*2336*/ - -#define CD_XA_HEAD (CD_HEAD_SIZE+CD_SUBHEAD_SIZE) /* "before data" part of raw XA frame */ -#define CD_XA_TAIL (CD_EDC_SIZE+CD_ECC_SIZE) /* "after data" part of raw XA frame */ -#define CD_XA_SYNC_HEAD (CD_SYNC_SIZE+CD_XA_HEAD) /* sync bytes + header of XA frame */ - -/* CD-ROM address types (cdrom_tocentry.cdte_format) */ -#define CDROM_LBA 0x01 /* "logical block": first frame is #0 */ -#define CDROM_MSF 0x02 /* "minute-second-frame": binary, not bcd here! */ - -/* bit to tell whether track is data or audio (cdrom_tocentry.cdte_ctrl) */ -#define CDROM_DATA_TRACK 0x04 - -/* The leadout track is always 0xAA, regardless of # of tracks on disc */ -#define CDROM_LEADOUT 0xAA - -/* audio states (from SCSI-2, but seen with other drives, too) */ -#define CDROM_AUDIO_INVALID 0x00 /* audio status not supported */ -#define CDROM_AUDIO_PLAY 0x11 /* audio play operation in progress */ -#define CDROM_AUDIO_PAUSED 0x12 /* audio play operation paused */ -#define CDROM_AUDIO_COMPLETED 0x13 /* audio play successfully completed */ -#define CDROM_AUDIO_ERROR 0x14 /* audio play stopped due to error */ -#define CDROM_AUDIO_NO_STATUS 0x15 /* no current audio status to return */ - -/* capability flags used with the uniform CD-ROM driver */ -#define CDC_CLOSE_TRAY 0x1 /* caddy systems _can't_ close */ -#define CDC_OPEN_TRAY 0x2 /* but _can_ eject. */ -#define CDC_LOCK 0x4 /* disable manual eject */ -#define CDC_SELECT_SPEED 0x8 /* programmable speed */ -#define CDC_SELECT_DISC 0x10 /* select disc from juke-box */ -#define CDC_MULTI_SESSION 0x20 /* read sessions>1 */ -#define CDC_MCN 0x40 /* Medium Catalog Number */ -#define CDC_MEDIA_CHANGED 0x80 /* media changed */ -#define CDC_PLAY_AUDIO 0x100 /* audio functions */ -#define CDC_RESET 0x200 /* hard reset device */ -#define CDC_DRIVE_STATUS 0x800 /* driver implements drive status */ -#define CDC_GENERIC_PACKET 0x1000 /* driver implements generic packets */ -#define CDC_CD_R 0x2000 /* drive is a CD-R */ -#define CDC_CD_RW 0x4000 /* drive is a CD-RW */ -#define CDC_DVD 0x8000 /* drive is a DVD */ -#define CDC_DVD_R 0x10000 /* drive can write DVD-R */ -#define CDC_DVD_RAM 0x20000 /* drive can write DVD-RAM */ -#define CDC_MO_DRIVE 0x40000 /* drive is an MO device */ -#define CDC_MRW 0x80000 /* drive can read MRW */ -#define CDC_MRW_W 0x100000 /* drive can write MRW */ -#define CDC_RAM 0x200000 /* ok to open for WRITE */ - -/* drive status possibilities returned by CDROM_DRIVE_STATUS ioctl */ -#define CDS_NO_INFO 0 /* if not implemented */ -#define CDS_NO_DISC 1 -#define CDS_TRAY_OPEN 2 -#define CDS_DRIVE_NOT_READY 3 -#define CDS_DISC_OK 4 - -/* return values for the CDROM_DISC_STATUS ioctl */ -/* can also return CDS_NO_[INFO|DISC], from above */ -#define CDS_AUDIO 100 -#define CDS_DATA_1 101 -#define CDS_DATA_2 102 -#define CDS_XA_2_1 103 -#define CDS_XA_2_2 104 -#define CDS_MIXED 105 - -/* User-configurable behavior options for the uniform CD-ROM driver */ -#define CDO_AUTO_CLOSE 0x1 /* close tray on first open() */ -#define CDO_AUTO_EJECT 0x2 /* open tray on last release() */ -#define CDO_USE_FFLAGS 0x4 /* use O_NONBLOCK information on open */ -#define CDO_LOCK 0x8 /* lock tray on open files */ -#define CDO_CHECK_TYPE 0x10 /* check type on open for data */ - -/* Special codes used when specifying changer slots. */ -#define CDSL_NONE (INT_MAX-1) -#define CDSL_CURRENT INT_MAX - -/* For partition based multisession access. IDE can handle 64 partitions - * per drive - SCSI CD-ROM's use minors to differentiate between the - * various drives, so we can't do multisessions the same way there. - * Use the -o session=x option to mount on them. - */ -#define CD_PART_MAX 64 -#define CD_PART_MASK (CD_PART_MAX - 1) - -/********************************************************************* - * Generic Packet commands, MMC commands, and such - *********************************************************************/ - - /* The generic packet command opcodes for CD/DVD Logical Units, - * From Table 57 of the SFF8090 Ver. 3 (Mt. Fuji) draft standard. */ -#define GPCMD_BLANK 0xa1 -#define GPCMD_CLOSE_TRACK 0x5b -#define GPCMD_FLUSH_CACHE 0x35 -#define GPCMD_FORMAT_UNIT 0x04 -#define GPCMD_GET_CONFIGURATION 0x46 -#define GPCMD_GET_EVENT_STATUS_NOTIFICATION 0x4a -#define GPCMD_GET_PERFORMANCE 0xac -#define GPCMD_INQUIRY 0x12 -#define GPCMD_LOAD_UNLOAD 0xa6 -#define GPCMD_MECHANISM_STATUS 0xbd -#define GPCMD_MODE_SELECT_10 0x55 -#define GPCMD_MODE_SENSE_10 0x5a -#define GPCMD_PAUSE_RESUME 0x4b -#define GPCMD_PLAY_AUDIO_10 0x45 -#define GPCMD_PLAY_AUDIO_MSF 0x47 -#define GPCMD_PLAY_AUDIO_TI 0x48 -#define GPCMD_PLAY_CD 0xbc -#define GPCMD_PREVENT_ALLOW_MEDIUM_REMOVAL 0x1e -#define GPCMD_READ_10 0x28 -#define GPCMD_READ_12 0xa8 -#define GPCMD_READ_BUFFER 0x3c -#define GPCMD_READ_BUFFER_CAPACITY 0x5c -#define GPCMD_READ_CDVD_CAPACITY 0x25 -#define GPCMD_READ_CD 0xbe -#define GPCMD_READ_CD_MSF 0xb9 -#define GPCMD_READ_DISC_INFO 0x51 -#define GPCMD_READ_DVD_STRUCTURE 0xad -#define GPCMD_READ_FORMAT_CAPACITIES 0x23 -#define GPCMD_READ_HEADER 0x44 -#define GPCMD_READ_TRACK_RZONE_INFO 0x52 -#define GPCMD_READ_SUBCHANNEL 0x42 -#define GPCMD_READ_TOC_PMA_ATIP 0x43 -#define GPCMD_REPAIR_RZONE_TRACK 0x58 -#define GPCMD_REPORT_KEY 0xa4 -#define GPCMD_REQUEST_SENSE 0x03 -#define GPCMD_RESERVE_RZONE_TRACK 0x53 -#define GPCMD_SEND_CUE_SHEET 0x5d -#define GPCMD_SCAN 0xba -#define GPCMD_SEEK 0x2b -#define GPCMD_SEND_DVD_STRUCTURE 0xbf -#define GPCMD_SEND_EVENT 0xa2 -#define GPCMD_SEND_KEY 0xa3 -#define GPCMD_SEND_OPC 0x54 -#define GPCMD_SET_READ_AHEAD 0xa7 -#define GPCMD_SET_STREAMING 0xb6 -#define GPCMD_START_STOP_UNIT 0x1b -#define GPCMD_STOP_PLAY_SCAN 0x4e -#define GPCMD_TEST_UNIT_READY 0x00 -#define GPCMD_VERIFY_10 0x2f -#define GPCMD_WRITE_10 0x2a -#define GPCMD_WRITE_12 0xaa -#define GPCMD_WRITE_AND_VERIFY_10 0x2e -#define GPCMD_WRITE_BUFFER 0x3b -/* This is listed as optional in ATAPI 2.6, but is (curiously) - * missing from Mt. Fuji, Table 57. It _is_ mentioned in Mt. Fuji - * Table 377 as an MMC command for SCSi devices though... Most ATAPI - * drives support it. */ -#define GPCMD_SET_SPEED 0xbb -/* This seems to be a SCSI specific CD-ROM opcode - * to play data at track/index */ -#define GPCMD_PLAYAUDIO_TI 0x48 -/* - * From MS Media Status Notification Support Specification. For - * older drives only. - */ -#define GPCMD_GET_MEDIA_STATUS 0xda - -/* Mode page codes for mode sense/set */ -#define GPMODE_VENDOR_PAGE 0x00 -#define GPMODE_R_W_ERROR_PAGE 0x01 -#define GPMODE_WRITE_PARMS_PAGE 0x05 -#define GPMODE_WCACHING_PAGE 0x08 -#define GPMODE_AUDIO_CTL_PAGE 0x0e -#define GPMODE_POWER_PAGE 0x1a -#define GPMODE_FAULT_FAIL_PAGE 0x1c -#define GPMODE_TO_PROTECT_PAGE 0x1d -#define GPMODE_CAPABILITIES_PAGE 0x2a -#define GPMODE_ALL_PAGES 0x3f -/* Not in Mt. Fuji, but in ATAPI 2.6 -- deprecated now in favor - * of MODE_SENSE_POWER_PAGE */ -#define GPMODE_CDROM_PAGE 0x0d - - - -/* DVD struct types */ -#define DVD_STRUCT_PHYSICAL 0x00 -#define DVD_STRUCT_COPYRIGHT 0x01 -#define DVD_STRUCT_DISCKEY 0x02 -#define DVD_STRUCT_BCA 0x03 -#define DVD_STRUCT_MANUFACT 0x04 - -struct dvd_layer { - __u8 book_version : 4; - __u8 book_type : 4; - __u8 min_rate : 4; - __u8 disc_size : 4; - __u8 layer_type : 4; - __u8 track_path : 1; - __u8 nlayers : 2; - __u8 track_density : 4; - __u8 linear_density : 4; - __u8 bca : 1; - __u32 start_sector; - __u32 end_sector; - __u32 end_sector_l0; -}; - -#define DVD_LAYERS 4 - -struct dvd_physical { - __u8 type; - __u8 layer_num; - struct dvd_layer layer[DVD_LAYERS]; -}; - -struct dvd_copyright { - __u8 type; - - __u8 layer_num; - __u8 cpst; - __u8 rmi; -}; - -struct dvd_disckey { - __u8 type; - - unsigned agid : 2; - __u8 value[2048]; -}; - -struct dvd_bca { - __u8 type; - - int len; - __u8 value[188]; -}; - -struct dvd_manufact { - __u8 type; - - __u8 layer_num; - int len; - __u8 value[2048]; -}; - -typedef union { - __u8 type; - - struct dvd_physical physical; - struct dvd_copyright copyright; - struct dvd_disckey disckey; - struct dvd_bca bca; - struct dvd_manufact manufact; -} dvd_struct; - -/* - * DVD authentication ioctl - */ - -/* Authentication states */ -#define DVD_LU_SEND_AGID 0 -#define DVD_HOST_SEND_CHALLENGE 1 -#define DVD_LU_SEND_KEY1 2 -#define DVD_LU_SEND_CHALLENGE 3 -#define DVD_HOST_SEND_KEY2 4 - -/* Termination states */ -#define DVD_AUTH_ESTABLISHED 5 -#define DVD_AUTH_FAILURE 6 - -/* Other functions */ -#define DVD_LU_SEND_TITLE_KEY 7 -#define DVD_LU_SEND_ASF 8 -#define DVD_INVALIDATE_AGID 9 -#define DVD_LU_SEND_RPC_STATE 10 -#define DVD_HOST_SEND_RPC_STATE 11 - -/* State data */ -typedef __u8 dvd_key[5]; /* 40-bit value, MSB is first elem. */ -typedef __u8 dvd_challenge[10]; /* 80-bit value, MSB is first elem. */ - -struct dvd_lu_send_agid { - __u8 type; - unsigned agid : 2; -}; - -struct dvd_host_send_challenge { - __u8 type; - unsigned agid : 2; - - dvd_challenge chal; -}; - -struct dvd_send_key { - __u8 type; - unsigned agid : 2; - - dvd_key key; -}; - -struct dvd_lu_send_challenge { - __u8 type; - unsigned agid : 2; - - dvd_challenge chal; -}; - -#define DVD_CPM_NO_COPYRIGHT 0 -#define DVD_CPM_COPYRIGHTED 1 - -#define DVD_CP_SEC_NONE 0 -#define DVD_CP_SEC_EXIST 1 - -#define DVD_CGMS_UNRESTRICTED 0 -#define DVD_CGMS_SINGLE 2 -#define DVD_CGMS_RESTRICTED 3 - -struct dvd_lu_send_title_key { - __u8 type; - unsigned agid : 2; - - dvd_key title_key; - int lba; - unsigned cpm : 1; - unsigned cp_sec : 1; - unsigned cgms : 2; -}; - -struct dvd_lu_send_asf { - __u8 type; - unsigned agid : 2; - - unsigned asf : 1; -}; - -struct dvd_host_send_rpcstate { - __u8 type; - __u8 pdrc; -}; - -struct dvd_lu_send_rpcstate { - __u8 type : 2; - __u8 vra : 3; - __u8 ucca : 3; - __u8 region_mask; - __u8 rpc_scheme; -}; - -typedef union { - __u8 type; - - struct dvd_lu_send_agid lsa; - struct dvd_host_send_challenge hsc; - struct dvd_send_key lsk; - struct dvd_lu_send_challenge lsc; - struct dvd_send_key hsk; - struct dvd_lu_send_title_key lstk; - struct dvd_lu_send_asf lsasf; - struct dvd_host_send_rpcstate hrpcs; - struct dvd_lu_send_rpcstate lrpcs; -} dvd_authinfo; - -struct request_sense { -#if defined(__BIG_ENDIAN_BITFIELD) - __u8 valid : 1; - __u8 error_code : 7; -#elif defined(__LITTLE_ENDIAN_BITFIELD) - __u8 error_code : 7; - __u8 valid : 1; -#endif - __u8 segment_number; -#if defined(__BIG_ENDIAN_BITFIELD) - __u8 reserved1 : 2; - __u8 ili : 1; - __u8 reserved2 : 1; - __u8 sense_key : 4; -#elif defined(__LITTLE_ENDIAN_BITFIELD) - __u8 sense_key : 4; - __u8 reserved2 : 1; - __u8 ili : 1; - __u8 reserved1 : 2; -#endif - __u8 information[4]; - __u8 add_sense_len; - __u8 command_info[4]; - __u8 asc; - __u8 ascq; - __u8 fruc; - __u8 sks[3]; - __u8 asb[46]; -}; - -/* - * feature profile - */ -#define CDF_RWRT 0x0020 /* "Random Writable" */ -#define CDF_HWDM 0x0024 /* "Hardware Defect Management" */ -#define CDF_MRW 0x0028 - -/* - * media status bits - */ -#define CDM_MRW_NOTMRW 0 -#define CDM_MRW_BGFORMAT_INACTIVE 1 -#define CDM_MRW_BGFORMAT_ACTIVE 2 -#define CDM_MRW_BGFORMAT_COMPLETE 3 - -/* - * mrw address spaces - */ -#define MRW_LBA_DMA 0 -#define MRW_LBA_GAA 1 - -/* - * mrw mode pages (first is deprecated) -- probed at init time and - * cdi->mrw_mode_page is set - */ -#define MRW_MODE_PC_PRE1 0x2c -#define MRW_MODE_PC 0x03 - -struct mrw_feature_desc { - __be16 feature_code; -#if defined(__BIG_ENDIAN_BITFIELD) - __u8 reserved1 : 2; - __u8 feature_version : 4; - __u8 persistent : 1; - __u8 curr : 1; -#elif defined(__LITTLE_ENDIAN_BITFIELD) - __u8 curr : 1; - __u8 persistent : 1; - __u8 feature_version : 4; - __u8 reserved1 : 2; -#endif - __u8 add_len; -#if defined(__BIG_ENDIAN_BITFIELD) - __u8 reserved2 : 7; - __u8 write : 1; -#elif defined(__LITTLE_ENDIAN_BITFIELD) - __u8 write : 1; - __u8 reserved2 : 7; -#endif - __u8 reserved3; - __u8 reserved4; - __u8 reserved5; -}; - -/* cf. mmc4r02g.pdf 5.3.10 Random Writable Feature (0020h) pg 197 of 635 */ -struct rwrt_feature_desc { - __be16 feature_code; -#if defined(__BIG_ENDIAN_BITFIELD) - __u8 reserved1 : 2; - __u8 feature_version : 4; - __u8 persistent : 1; - __u8 curr : 1; -#elif defined(__LITTLE_ENDIAN_BITFIELD) - __u8 curr : 1; - __u8 persistent : 1; - __u8 feature_version : 4; - __u8 reserved1 : 2; -#endif - __u8 add_len; - __u32 last_lba; - __u32 block_size; - __u16 blocking; -#if defined(__BIG_ENDIAN_BITFIELD) - __u8 reserved2 : 7; - __u8 page_present : 1; -#elif defined(__LITTLE_ENDIAN_BITFIELD) - __u8 page_present : 1; - __u8 reserved2 : 7; -#endif - __u8 reserved3; -}; - -typedef struct { - __be16 disc_information_length; -#if defined(__BIG_ENDIAN_BITFIELD) - __u8 reserved1 : 3; - __u8 erasable : 1; - __u8 border_status : 2; - __u8 disc_status : 2; -#elif defined(__LITTLE_ENDIAN_BITFIELD) - __u8 disc_status : 2; - __u8 border_status : 2; - __u8 erasable : 1; - __u8 reserved1 : 3; -#else -#error "Please fix <asm/byteorder.h>" -#endif - __u8 n_first_track; - __u8 n_sessions_lsb; - __u8 first_track_lsb; - __u8 last_track_lsb; -#if defined(__BIG_ENDIAN_BITFIELD) - __u8 did_v : 1; - __u8 dbc_v : 1; - __u8 uru : 1; - __u8 reserved2 : 2; - __u8 dbit : 1; - __u8 mrw_status : 2; -#elif defined(__LITTLE_ENDIAN_BITFIELD) - __u8 mrw_status : 2; - __u8 dbit : 1; - __u8 reserved2 : 2; - __u8 uru : 1; - __u8 dbc_v : 1; - __u8 did_v : 1; -#endif - __u8 disc_type; - __u8 n_sessions_msb; - __u8 first_track_msb; - __u8 last_track_msb; - __u32 disc_id; - __u32 lead_in; - __u32 lead_out; - __u8 disc_bar_code[8]; - __u8 reserved3; - __u8 n_opc; -} disc_information; - -typedef struct { - __be16 track_information_length; - __u8 track_lsb; - __u8 session_lsb; - __u8 reserved1; -#if defined(__BIG_ENDIAN_BITFIELD) - __u8 reserved2 : 2; - __u8 damage : 1; - __u8 copy : 1; - __u8 track_mode : 4; - __u8 rt : 1; - __u8 blank : 1; - __u8 packet : 1; - __u8 fp : 1; - __u8 data_mode : 4; - __u8 reserved3 : 6; - __u8 lra_v : 1; - __u8 nwa_v : 1; -#elif defined(__LITTLE_ENDIAN_BITFIELD) - __u8 track_mode : 4; - __u8 copy : 1; - __u8 damage : 1; - __u8 reserved2 : 2; - __u8 data_mode : 4; - __u8 fp : 1; - __u8 packet : 1; - __u8 blank : 1; - __u8 rt : 1; - __u8 nwa_v : 1; - __u8 lra_v : 1; - __u8 reserved3 : 6; -#endif - __be32 track_start; - __be32 next_writable; - __be32 free_blocks; - __be32 fixed_packet_size; - __be32 track_size; - __be32 last_rec_address; -} track_information; - -struct feature_header { - __u32 data_len; - __u8 reserved1; - __u8 reserved2; - __u16 curr_profile; -}; - -struct mode_page_header { - __be16 mode_data_length; - __u8 medium_type; - __u8 reserved1; - __u8 reserved2; - __u8 reserved3; - __be16 desc_length; -}; - -#ifdef __KERNEL__ #include <linux/fs.h> /* not really needed, later.. */ #include <linux/list.h> +#include <uapi/linux/cdrom.h> struct packet_command { @@ -1209,6 +311,4 @@ static inline int msf_to_lba(u8 m, u8 s, u8 f) { return (((m * CD_SECS) + s) * CD_FRAMES + f) - CD_MSF_OFFSET; } -#endif /* End of kernel only stuff */ - #endif /* _LINUX_CDROM_H */ diff --git a/include/linux/cm4000_cs.h b/include/linux/cm4000_cs.h index 3c4aac406175..88bee3a33090 100644 --- a/include/linux/cm4000_cs.h +++ b/include/linux/cm4000_cs.h @@ -1,68 +1,10 @@ #ifndef _CM4000_H_ #define _CM4000_H_ -#include <linux/types.h> +#include <uapi/linux/cm4000_cs.h> -#define MAX_ATR 33 - -#define CM4000_MAX_DEV 4 - -/* those two structures are passed via ioctl() from/to userspace. They are - * used by existing userspace programs, so I kepth the awkward "bIFSD" naming - * not to break compilation of userspace apps. -HW */ - -typedef struct atreq { - __s32 atr_len; - unsigned char atr[64]; - __s32 power_act; - unsigned char bIFSD; - unsigned char bIFSC; -} atreq_t; - - -/* what is particularly stupid in the original driver is the arch-dependent - * member sizes. This leads to CONFIG_COMPAT breakage, since 32bit userspace - * will lay out the structure members differently than the 64bit kernel. - * - * I've changed "ptsreq.protocol" from "unsigned long" to "__u32". - * On 32bit this will make no difference. With 64bit kernels, it will make - * 32bit apps work, too. - */ - -typedef struct ptsreq { - __u32 protocol; /*T=0: 2^0, T=1: 2^1*/ - unsigned char flags; - unsigned char pts1; - unsigned char pts2; - unsigned char pts3; -} ptsreq_t; - -#define CM_IOC_MAGIC 'c' -#define CM_IOC_MAXNR 255 - -#define CM_IOCGSTATUS _IOR (CM_IOC_MAGIC, 0, unsigned char *) -#define CM_IOCGATR _IOWR(CM_IOC_MAGIC, 1, atreq_t *) -#define CM_IOCSPTS _IOW (CM_IOC_MAGIC, 2, ptsreq_t *) -#define CM_IOCSRDR _IO (CM_IOC_MAGIC, 3) -#define CM_IOCARDOFF _IO (CM_IOC_MAGIC, 4) - -#define CM_IOSDBGLVL _IOW(CM_IOC_MAGIC, 250, int*) - -/* card and device states */ -#define CM_CARD_INSERTED 0x01 -#define CM_CARD_POWERED 0x02 -#define CM_ATR_PRESENT 0x04 -#define CM_ATR_VALID 0x08 -#define CM_STATE_VALID 0x0f -/* extra info only from CM4000 */ -#define CM_NO_READER 0x10 -#define CM_BAD_CARD 0x20 - - -#ifdef __KERNEL__ #define DEVICE_NAME "cmm" #define MODULE_NAME "cm4000_cs" -#endif /* __KERNEL__ */ #endif /* _CM4000_H_ */ diff --git a/include/linux/cn_proc.h b/include/linux/cn_proc.h index d03612b196e1..2c1bc1ea04ee 100644 --- a/include/linux/cn_proc.h +++ b/include/linux/cn_proc.h @@ -14,111 +14,11 @@ * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. */ - #ifndef CN_PROC_H #define CN_PROC_H -#include <linux/types.h> - -/* - * Userspace sends this enum to register with the kernel that it is listening - * for events on the connector. - */ -enum proc_cn_mcast_op { - PROC_CN_MCAST_LISTEN = 1, - PROC_CN_MCAST_IGNORE = 2 -}; - -/* - * From the user's point of view, the process - * ID is the thread group ID and thread ID is the internal - * kernel "pid". So, fields are assigned as follow: - * - * In user space - In kernel space - * - * parent process ID = parent->tgid - * parent thread ID = parent->pid - * child process ID = child->tgid - * child thread ID = child->pid - */ - -struct proc_event { - enum what { - /* Use successive bits so the enums can be used to record - * sets of events as well - */ - PROC_EVENT_NONE = 0x00000000, - PROC_EVENT_FORK = 0x00000001, - PROC_EVENT_EXEC = 0x00000002, - PROC_EVENT_UID = 0x00000004, - PROC_EVENT_GID = 0x00000040, - PROC_EVENT_SID = 0x00000080, - PROC_EVENT_PTRACE = 0x00000100, - PROC_EVENT_COMM = 0x00000200, - /* "next" should be 0x00000400 */ - /* "last" is the last process event: exit */ - PROC_EVENT_EXIT = 0x80000000 - } what; - __u32 cpu; - __u64 __attribute__((aligned(8))) timestamp_ns; - /* Number of nano seconds since system boot */ - union { /* must be last field of proc_event struct */ - struct { - __u32 err; - } ack; - - struct fork_proc_event { - __kernel_pid_t parent_pid; - __kernel_pid_t parent_tgid; - __kernel_pid_t child_pid; - __kernel_pid_t child_tgid; - } fork; - - struct exec_proc_event { - __kernel_pid_t process_pid; - __kernel_pid_t process_tgid; - } exec; - - struct id_proc_event { - __kernel_pid_t process_pid; - __kernel_pid_t process_tgid; - union { - __u32 ruid; /* task uid */ - __u32 rgid; /* task gid */ - } r; - union { - __u32 euid; - __u32 egid; - } e; - } id; - - struct sid_proc_event { - __kernel_pid_t process_pid; - __kernel_pid_t process_tgid; - } sid; - - struct ptrace_proc_event { - __kernel_pid_t process_pid; - __kernel_pid_t process_tgid; - __kernel_pid_t tracer_pid; - __kernel_pid_t tracer_tgid; - } ptrace; - - struct comm_proc_event { - __kernel_pid_t process_pid; - __kernel_pid_t process_tgid; - char comm[16]; - } comm; - - struct exit_proc_event { - __kernel_pid_t process_pid; - __kernel_pid_t process_tgid; - __u32 exit_code, exit_signal; - } exit; - } event_data; -}; +#include <uapi/linux/cn_proc.h> -#ifdef __KERNEL__ #ifdef CONFIG_PROC_EVENTS void proc_fork_connector(struct task_struct *task); void proc_exec_connector(struct task_struct *task); @@ -151,5 +51,4 @@ static inline void proc_ptrace_connector(struct task_struct *task, static inline void proc_exit_connector(struct task_struct *task) {} #endif /* CONFIG_PROC_EVENTS */ -#endif /* __KERNEL__ */ #endif /* CN_PROC_H */ diff --git a/include/linux/coda.h b/include/linux/coda.h index 96c87693800b..cff544f81105 100644 --- a/include/linux/coda.h +++ b/include/linux/coda.h @@ -55,690 +55,12 @@ Mellon the rights to redistribute these changes without encumbrance. * Linux modifications by * Peter Braam, Aug 1996 */ - #ifndef _CODA_HEADER_ #define _CODA_HEADER_ - -/* Catch new _KERNEL defn for NetBSD and DJGPP/__CYGWIN32__ */ -#if defined(__NetBSD__) || \ - ((defined(DJGPP) || defined(__CYGWIN32__)) && !defined(KERNEL)) -#include <sys/types.h> -#endif - -#ifndef CODA_MAXSYMLINKS -#define CODA_MAXSYMLINKS 10 -#endif - -#if defined(DJGPP) || defined(__CYGWIN32__) -#ifdef KERNEL -typedef unsigned long u_long; -typedef unsigned int u_int; -typedef unsigned short u_short; -typedef u_long ino_t; -typedef u_long dev_t; -typedef void * caddr_t; -#ifdef DOS -typedef unsigned __int64 u_quad_t; -#else -typedef unsigned long long u_quad_t; -#endif - -#define inline - -struct timespec { - long ts_sec; - long ts_nsec; -}; -#else /* DJGPP but not KERNEL */ -#include <sys/time.h> -typedef unsigned long long u_quad_t; -#endif /* !KERNEL */ -#endif /* !DJGPP */ - - #if defined(__linux__) -#include <linux/time.h> -#define cdev_t u_quad_t -#ifndef __KERNEL__ -#if !defined(_UQUAD_T_) && (!defined(__GLIBC__) || __GLIBC__ < 2) -#define _UQUAD_T_ 1 typedef unsigned long long u_quad_t; -#endif -#else /*__KERNEL__ */ -typedef unsigned long long u_quad_t; -#endif /* __KERNEL__ */ #else -#define cdev_t dev_t -#endif - -#ifdef __CYGWIN32__ -struct timespec { - time_t tv_sec; /* seconds */ - long tv_nsec; /* nanoseconds */ -}; -#endif - -#ifndef __BIT_TYPES_DEFINED__ -#define __BIT_TYPES_DEFINED__ -typedef signed char int8_t; -typedef unsigned char u_int8_t; -typedef short int16_t; -typedef unsigned short u_int16_t; -typedef int int32_t; -typedef unsigned int u_int32_t; -#endif - - -/* - * Cfs constants - */ -#define CODA_MAXNAMLEN 255 -#define CODA_MAXPATHLEN 1024 -#define CODA_MAXSYMLINK 10 - -/* these are Coda's version of O_RDONLY etc combinations - * to deal with VFS open modes - */ -#define C_O_READ 0x001 -#define C_O_WRITE 0x002 -#define C_O_TRUNC 0x010 -#define C_O_EXCL 0x100 -#define C_O_CREAT 0x200 - -/* these are to find mode bits in Venus */ -#define C_M_READ 00400 -#define C_M_WRITE 00200 - -/* for access Venus will use */ -#define C_A_C_OK 8 /* Test for writing upon create. */ -#define C_A_R_OK 4 /* Test for read permission. */ -#define C_A_W_OK 2 /* Test for write permission. */ -#define C_A_X_OK 1 /* Test for execute permission. */ -#define C_A_F_OK 0 /* Test for existence. */ - - - -#ifndef _VENUS_DIRENT_T_ -#define _VENUS_DIRENT_T_ 1 -struct venus_dirent { - u_int32_t d_fileno; /* file number of entry */ - u_int16_t d_reclen; /* length of this record */ - u_int8_t d_type; /* file type, see below */ - u_int8_t d_namlen; /* length of string in d_name */ - char d_name[CODA_MAXNAMLEN + 1];/* name must be no longer than this */ -}; -#undef DIRSIZ -#define DIRSIZ(dp) ((sizeof (struct venus_dirent) - (CODA_MAXNAMLEN+1)) + \ - (((dp)->d_namlen+1 + 3) &~ 3)) - -/* - * File types - */ -#define CDT_UNKNOWN 0 -#define CDT_FIFO 1 -#define CDT_CHR 2 -#define CDT_DIR 4 -#define CDT_BLK 6 -#define CDT_REG 8 -#define CDT_LNK 10 -#define CDT_SOCK 12 -#define CDT_WHT 14 - -/* - * Convert between stat structure types and directory types. - */ -#define IFTOCDT(mode) (((mode) & 0170000) >> 12) -#define CDTTOIF(dirtype) ((dirtype) << 12) - #endif - -#ifndef _VUID_T_ -#define _VUID_T_ -typedef u_int32_t vuid_t; -typedef u_int32_t vgid_t; -#endif /*_VUID_T_ */ - -struct CodaFid { - u_int32_t opaque[4]; -}; - -#define coda_f2i(fid)\ - (fid ? (fid->opaque[3] ^ (fid->opaque[2]<<10) ^ (fid->opaque[1]<<20) ^ fid->opaque[0]) : 0) - -#ifndef _VENUS_VATTR_T_ -#define _VENUS_VATTR_T_ -/* - * Vnode types. VNON means no type. - */ -enum coda_vtype { C_VNON, C_VREG, C_VDIR, C_VBLK, C_VCHR, C_VLNK, C_VSOCK, C_VFIFO, C_VBAD }; - -struct coda_vattr { - long va_type; /* vnode type (for create) */ - u_short va_mode; /* files access mode and type */ - short va_nlink; /* number of references to file */ - vuid_t va_uid; /* owner user id */ - vgid_t va_gid; /* owner group id */ - long va_fileid; /* file id */ - u_quad_t va_size; /* file size in bytes */ - long va_blocksize; /* blocksize preferred for i/o */ - struct timespec va_atime; /* time of last access */ - struct timespec va_mtime; /* time of last modification */ - struct timespec va_ctime; /* time file changed */ - u_long va_gen; /* generation number of file */ - u_long va_flags; /* flags defined for file */ - cdev_t va_rdev; /* device special file represents */ - u_quad_t va_bytes; /* bytes of disk space held by file */ - u_quad_t va_filerev; /* file modification number */ -}; - +#include <uapi/linux/coda.h> #endif - -/* structure used by CODA_STATFS for getting cache information from venus */ -struct coda_statfs { - int32_t f_blocks; - int32_t f_bfree; - int32_t f_bavail; - int32_t f_files; - int32_t f_ffree; -}; - -/* - * Kernel <--> Venus communications. - */ - -#define CODA_ROOT 2 -#define CODA_OPEN_BY_FD 3 -#define CODA_OPEN 4 -#define CODA_CLOSE 5 -#define CODA_IOCTL 6 -#define CODA_GETATTR 7 -#define CODA_SETATTR 8 -#define CODA_ACCESS 9 -#define CODA_LOOKUP 10 -#define CODA_CREATE 11 -#define CODA_REMOVE 12 -#define CODA_LINK 13 -#define CODA_RENAME 14 -#define CODA_MKDIR 15 -#define CODA_RMDIR 16 -#define CODA_SYMLINK 18 -#define CODA_READLINK 19 -#define CODA_FSYNC 20 -#define CODA_VGET 22 -#define CODA_SIGNAL 23 -#define CODA_REPLACE 24 /* DOWNCALL */ -#define CODA_FLUSH 25 /* DOWNCALL */ -#define CODA_PURGEUSER 26 /* DOWNCALL */ -#define CODA_ZAPFILE 27 /* DOWNCALL */ -#define CODA_ZAPDIR 28 /* DOWNCALL */ -#define CODA_PURGEFID 30 /* DOWNCALL */ -#define CODA_OPEN_BY_PATH 31 -#define CODA_RESOLVE 32 -#define CODA_REINTEGRATE 33 -#define CODA_STATFS 34 -#define CODA_STORE 35 -#define CODA_RELEASE 36 -#define CODA_NCALLS 37 - -#define DOWNCALL(opcode) (opcode >= CODA_REPLACE && opcode <= CODA_PURGEFID) - -#define VC_MAXDATASIZE 8192 -#define VC_MAXMSGSIZE sizeof(union inputArgs)+sizeof(union outputArgs) +\ - VC_MAXDATASIZE - -#define CIOC_KERNEL_VERSION _IOWR('c', 10, size_t) - -#define CODA_KERNEL_VERSION 3 /* 128-bit file identifiers */ - -/* - * Venus <-> Coda RPC arguments - */ -struct coda_in_hdr { - u_int32_t opcode; - u_int32_t unique; /* Keep multiple outstanding msgs distinct */ - pid_t pid; - pid_t pgid; - vuid_t uid; -}; - -/* Really important that opcode and unique are 1st two fields! */ -struct coda_out_hdr { - u_int32_t opcode; - u_int32_t unique; - u_int32_t result; -}; - -/* coda_root: NO_IN */ -struct coda_root_out { - struct coda_out_hdr oh; - struct CodaFid VFid; -}; - -struct coda_root_in { - struct coda_in_hdr in; -}; - -/* coda_open: */ -struct coda_open_in { - struct coda_in_hdr ih; - struct CodaFid VFid; - int flags; -}; - -struct coda_open_out { - struct coda_out_hdr oh; - cdev_t dev; - ino_t inode; -}; - - -/* coda_store: */ -struct coda_store_in { - struct coda_in_hdr ih; - struct CodaFid VFid; - int flags; -}; - -struct coda_store_out { - struct coda_out_hdr out; -}; - -/* coda_release: */ -struct coda_release_in { - struct coda_in_hdr ih; - struct CodaFid VFid; - int flags; -}; - -struct coda_release_out { - struct coda_out_hdr out; -}; - -/* coda_close: */ -struct coda_close_in { - struct coda_in_hdr ih; - struct CodaFid VFid; - int flags; -}; - -struct coda_close_out { - struct coda_out_hdr out; -}; - -/* coda_ioctl: */ -struct coda_ioctl_in { - struct coda_in_hdr ih; - struct CodaFid VFid; - int cmd; - int len; - int rwflag; - char *data; /* Place holder for data. */ -}; - -struct coda_ioctl_out { - struct coda_out_hdr oh; - int len; - caddr_t data; /* Place holder for data. */ -}; - - -/* coda_getattr: */ -struct coda_getattr_in { - struct coda_in_hdr ih; - struct CodaFid VFid; -}; - -struct coda_getattr_out { - struct coda_out_hdr oh; - struct coda_vattr attr; -}; - - -/* coda_setattr: NO_OUT */ -struct coda_setattr_in { - struct coda_in_hdr ih; - struct CodaFid VFid; - struct coda_vattr attr; -}; - -struct coda_setattr_out { - struct coda_out_hdr out; -}; - -/* coda_access: NO_OUT */ -struct coda_access_in { - struct coda_in_hdr ih; - struct CodaFid VFid; - int flags; -}; - -struct coda_access_out { - struct coda_out_hdr out; -}; - - -/* lookup flags */ -#define CLU_CASE_SENSITIVE 0x01 -#define CLU_CASE_INSENSITIVE 0x02 - -/* coda_lookup: */ -struct coda_lookup_in { - struct coda_in_hdr ih; - struct CodaFid VFid; - int name; /* Place holder for data. */ - int flags; -}; - -struct coda_lookup_out { - struct coda_out_hdr oh; - struct CodaFid VFid; - int vtype; -}; - - -/* coda_create: */ -struct coda_create_in { - struct coda_in_hdr ih; - struct CodaFid VFid; - struct coda_vattr attr; - int excl; - int mode; - int name; /* Place holder for data. */ -}; - -struct coda_create_out { - struct coda_out_hdr oh; - struct CodaFid VFid; - struct coda_vattr attr; -}; - - -/* coda_remove: NO_OUT */ -struct coda_remove_in { - struct coda_in_hdr ih; - struct CodaFid VFid; - int name; /* Place holder for data. */ -}; - -struct coda_remove_out { - struct coda_out_hdr out; -}; - -/* coda_link: NO_OUT */ -struct coda_link_in { - struct coda_in_hdr ih; - struct CodaFid sourceFid; /* cnode to link *to* */ - struct CodaFid destFid; /* Directory in which to place link */ - int tname; /* Place holder for data. */ -}; - -struct coda_link_out { - struct coda_out_hdr out; -}; - - -/* coda_rename: NO_OUT */ -struct coda_rename_in { - struct coda_in_hdr ih; - struct CodaFid sourceFid; - int srcname; - struct CodaFid destFid; - int destname; -}; - -struct coda_rename_out { - struct coda_out_hdr out; -}; - -/* coda_mkdir: */ -struct coda_mkdir_in { - struct coda_in_hdr ih; - struct CodaFid VFid; - struct coda_vattr attr; - int name; /* Place holder for data. */ -}; - -struct coda_mkdir_out { - struct coda_out_hdr oh; - struct CodaFid VFid; - struct coda_vattr attr; -}; - - -/* coda_rmdir: NO_OUT */ -struct coda_rmdir_in { - struct coda_in_hdr ih; - struct CodaFid VFid; - int name; /* Place holder for data. */ -}; - -struct coda_rmdir_out { - struct coda_out_hdr out; -}; - -/* coda_symlink: NO_OUT */ -struct coda_symlink_in { - struct coda_in_hdr ih; - struct CodaFid VFid; /* Directory to put symlink in */ - int srcname; - struct coda_vattr attr; - int tname; -}; - -struct coda_symlink_out { - struct coda_out_hdr out; -}; - -/* coda_readlink: */ -struct coda_readlink_in { - struct coda_in_hdr ih; - struct CodaFid VFid; -}; - -struct coda_readlink_out { - struct coda_out_hdr oh; - int count; - caddr_t data; /* Place holder for data. */ -}; - - -/* coda_fsync: NO_OUT */ -struct coda_fsync_in { - struct coda_in_hdr ih; - struct CodaFid VFid; -}; - -struct coda_fsync_out { - struct coda_out_hdr out; -}; - -/* coda_vget: */ -struct coda_vget_in { - struct coda_in_hdr ih; - struct CodaFid VFid; -}; - -struct coda_vget_out { - struct coda_out_hdr oh; - struct CodaFid VFid; - int vtype; -}; - - -/* CODA_SIGNAL is out-of-band, doesn't need data. */ -/* CODA_INVALIDATE is a venus->kernel call */ -/* CODA_FLUSH is a venus->kernel call */ - -/* coda_purgeuser: */ -/* CODA_PURGEUSER is a venus->kernel call */ -struct coda_purgeuser_out { - struct coda_out_hdr oh; - vuid_t uid; -}; - -/* coda_zapfile: */ -/* CODA_ZAPFILE is a venus->kernel call */ -struct coda_zapfile_out { - struct coda_out_hdr oh; - struct CodaFid CodaFid; -}; - -/* coda_zapdir: */ -/* CODA_ZAPDIR is a venus->kernel call */ -struct coda_zapdir_out { - struct coda_out_hdr oh; - struct CodaFid CodaFid; -}; - -/* coda_purgefid: */ -/* CODA_PURGEFID is a venus->kernel call */ -struct coda_purgefid_out { - struct coda_out_hdr oh; - struct CodaFid CodaFid; -}; - -/* coda_replace: */ -/* CODA_REPLACE is a venus->kernel call */ -struct coda_replace_out { /* coda_replace is a venus->kernel call */ - struct coda_out_hdr oh; - struct CodaFid NewFid; - struct CodaFid OldFid; -}; - -/* coda_open_by_fd: */ -struct coda_open_by_fd_in { - struct coda_in_hdr ih; - struct CodaFid VFid; - int flags; -}; - -struct coda_open_by_fd_out { - struct coda_out_hdr oh; - int fd; - -#ifdef __KERNEL__ - struct file *fh; /* not passed from userspace but used in-kernel only */ -#endif -}; - -/* coda_open_by_path: */ -struct coda_open_by_path_in { - struct coda_in_hdr ih; - struct CodaFid VFid; - int flags; -}; - -struct coda_open_by_path_out { - struct coda_out_hdr oh; - int path; -}; - -/* coda_statfs: NO_IN */ -struct coda_statfs_in { - struct coda_in_hdr in; -}; - -struct coda_statfs_out { - struct coda_out_hdr oh; - struct coda_statfs stat; -}; - -/* - * Occasionally, we don't cache the fid returned by CODA_LOOKUP. - * For instance, if the fid is inconsistent. - * This case is handled by setting the top bit of the type result parameter. - */ -#define CODA_NOCACHE 0x80000000 - -union inputArgs { - struct coda_in_hdr ih; /* NB: every struct below begins with an ih */ - struct coda_open_in coda_open; - struct coda_store_in coda_store; - struct coda_release_in coda_release; - struct coda_close_in coda_close; - struct coda_ioctl_in coda_ioctl; - struct coda_getattr_in coda_getattr; - struct coda_setattr_in coda_setattr; - struct coda_access_in coda_access; - struct coda_lookup_in coda_lookup; - struct coda_create_in coda_create; - struct coda_remove_in coda_remove; - struct coda_link_in coda_link; - struct coda_rename_in coda_rename; - struct coda_mkdir_in coda_mkdir; - struct coda_rmdir_in coda_rmdir; - struct coda_symlink_in coda_symlink; - struct coda_readlink_in coda_readlink; - struct coda_fsync_in coda_fsync; - struct coda_vget_in coda_vget; - struct coda_open_by_fd_in coda_open_by_fd; - struct coda_open_by_path_in coda_open_by_path; - struct coda_statfs_in coda_statfs; -}; - -union outputArgs { - struct coda_out_hdr oh; /* NB: every struct below begins with an oh */ - struct coda_root_out coda_root; - struct coda_open_out coda_open; - struct coda_ioctl_out coda_ioctl; - struct coda_getattr_out coda_getattr; - struct coda_lookup_out coda_lookup; - struct coda_create_out coda_create; - struct coda_mkdir_out coda_mkdir; - struct coda_readlink_out coda_readlink; - struct coda_vget_out coda_vget; - struct coda_purgeuser_out coda_purgeuser; - struct coda_zapfile_out coda_zapfile; - struct coda_zapdir_out coda_zapdir; - struct coda_purgefid_out coda_purgefid; - struct coda_replace_out coda_replace; - struct coda_open_by_fd_out coda_open_by_fd; - struct coda_open_by_path_out coda_open_by_path; - struct coda_statfs_out coda_statfs; -}; - -union coda_downcalls { - /* CODA_INVALIDATE is a venus->kernel call */ - /* CODA_FLUSH is a venus->kernel call */ - struct coda_purgeuser_out purgeuser; - struct coda_zapfile_out zapfile; - struct coda_zapdir_out zapdir; - struct coda_purgefid_out purgefid; - struct coda_replace_out replace; -}; - - -/* - * Used for identifying usage of "Control" and pioctls - */ - -#define PIOCPARM_MASK 0x0000ffff -struct ViceIoctl { - void __user *in; /* Data to be transferred in */ - void __user *out; /* Data to be transferred out */ - u_short in_size; /* Size of input buffer <= 2K */ - u_short out_size; /* Maximum size of output buffer, <= 2K */ -}; - -struct PioctlData { - const char __user *path; - int follow; - struct ViceIoctl vi; -}; - -#define CODA_CONTROL ".CONTROL" -#define CODA_CONTROLLEN 8 -#define CTL_INO -1 - -/* Data passed to mount */ - -#define CODA_MOUNT_VERSION 1 - -struct coda_mount_data { - int version; - int fd; /* Opened device */ -}; - -#endif - diff --git a/include/linux/coda_psdev.h b/include/linux/coda_psdev.h index 72f2d2f0af91..8031d6eef102 100644 --- a/include/linux/coda_psdev.h +++ b/include/linux/coda_psdev.h @@ -1,14 +1,9 @@ #ifndef __CODA_PSDEV_H #define __CODA_PSDEV_H -#include <linux/magic.h> - -#define CODA_PSDEV_MAJOR 67 -#define MAX_CODADEVS 5 /* how many do we allow */ - -#ifdef __KERNEL__ #include <linux/backing-dev.h> #include <linux/mutex.h> +#include <uapi/linux/coda_psdev.h> struct kstatfs; @@ -74,23 +69,4 @@ int venus_statfs(struct dentry *dentry, struct kstatfs *sfs); */ extern struct venus_comm coda_comms[]; -#endif /* __KERNEL__ */ - -/* messages between coda filesystem in kernel and Venus */ -struct upc_req { - struct list_head uc_chain; - caddr_t uc_data; - u_short uc_flags; - u_short uc_inSize; /* Size is at most 5000 bytes */ - u_short uc_outSize; - u_short uc_opcode; /* copied from data to save lookup */ - int uc_unique; - wait_queue_head_t uc_sleep; /* process' wait queue */ -}; - -#define CODA_REQ_ASYNC 0x1 -#define CODA_REQ_READ 0x2 -#define CODA_REQ_WRITE 0x4 -#define CODA_REQ_ABORT 0x8 - #endif diff --git a/include/linux/connector.h b/include/linux/connector.h index 76384074262d..b2b5a41b6a24 100644 --- a/include/linux/connector.h +++ b/include/linux/connector.h @@ -18,63 +18,9 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ - #ifndef __CONNECTOR_H #define __CONNECTOR_H -#include <linux/types.h> - -/* - * Process Events connector unique ids -- used for message routing - */ -#define CN_IDX_PROC 0x1 -#define CN_VAL_PROC 0x1 -#define CN_IDX_CIFS 0x2 -#define CN_VAL_CIFS 0x1 -#define CN_W1_IDX 0x3 /* w1 communication */ -#define CN_W1_VAL 0x1 -#define CN_IDX_V86D 0x4 -#define CN_VAL_V86D_UVESAFB 0x1 -#define CN_IDX_BB 0x5 /* BlackBoard, from the TSP GPL sampling framework */ -#define CN_DST_IDX 0x6 -#define CN_DST_VAL 0x1 -#define CN_IDX_DM 0x7 /* Device Mapper */ -#define CN_VAL_DM_USERSPACE_LOG 0x1 -#define CN_IDX_DRBD 0x8 -#define CN_VAL_DRBD 0x1 -#define CN_KVP_IDX 0x9 /* HyperV KVP */ -#define CN_KVP_VAL 0x1 /* queries from the kernel */ - -#define CN_NETLINK_USERS 10 /* Highest index + 1 */ - -/* - * Maximum connector's message size. - */ -#define CONNECTOR_MAX_MSG_SIZE 16384 - -/* - * idx and val are unique identifiers which - * are used for message routing and - * must be registered in connector.h for in-kernel usage. - */ - -struct cb_id { - __u32 idx; - __u32 val; -}; - -struct cn_msg { - struct cb_id id; - - __u32 seq; - __u32 ack; - - __u16 len; /* Length of the following data */ - __u16 flags; - __u8 data[0]; -}; - -#ifdef __KERNEL__ #include <linux/atomic.h> @@ -82,6 +28,7 @@ struct cn_msg { #include <linux/workqueue.h> #include <net/sock.h> +#include <uapi/linux/connector.h> #define CN_CBQ_NAMELEN 32 @@ -137,5 +84,4 @@ void cn_queue_free_dev(struct cn_queue_dev *dev); int cn_cb_equal(struct cb_id *, struct cb_id *); -#endif /* __KERNEL__ */ #endif /* __CONNECTOR_H */ diff --git a/include/linux/cramfs_fs.h b/include/linux/cramfs_fs.h index 0e7bf272ec2f..133789609f23 100644 --- a/include/linux/cramfs_fs.h +++ b/include/linux/cramfs_fs.h @@ -1,94 +1,10 @@ #ifndef __CRAMFS_H #define __CRAMFS_H -#include <linux/types.h> -#include <linux/magic.h> +#include <uapi/linux/cramfs_fs.h> -#define CRAMFS_SIGNATURE "Compressed ROMFS" - -/* - * Width of various bitfields in struct cramfs_inode. - * Primarily used to generate warnings in mkcramfs. - */ -#define CRAMFS_MODE_WIDTH 16 -#define CRAMFS_UID_WIDTH 16 -#define CRAMFS_SIZE_WIDTH 24 -#define CRAMFS_GID_WIDTH 8 -#define CRAMFS_NAMELEN_WIDTH 6 -#define CRAMFS_OFFSET_WIDTH 26 - -/* - * Since inode.namelen is a unsigned 6-bit number, the maximum cramfs - * path length is 63 << 2 = 252. - */ -#define CRAMFS_MAXPATHLEN (((1 << CRAMFS_NAMELEN_WIDTH) - 1) << 2) - -/* - * Reasonably terse representation of the inode data. - */ -struct cramfs_inode { - __u32 mode:CRAMFS_MODE_WIDTH, uid:CRAMFS_UID_WIDTH; - /* SIZE for device files is i_rdev */ - __u32 size:CRAMFS_SIZE_WIDTH, gid:CRAMFS_GID_WIDTH; - /* NAMELEN is the length of the file name, divided by 4 and - rounded up. (cramfs doesn't support hard links.) */ - /* OFFSET: For symlinks and non-empty regular files, this - contains the offset (divided by 4) of the file data in - compressed form (starting with an array of block pointers; - see README). For non-empty directories it is the offset - (divided by 4) of the inode of the first file in that - directory. For anything else, offset is zero. */ - __u32 namelen:CRAMFS_NAMELEN_WIDTH, offset:CRAMFS_OFFSET_WIDTH; -}; - -struct cramfs_info { - __u32 crc; - __u32 edition; - __u32 blocks; - __u32 files; -}; - -/* - * Superblock information at the beginning of the FS. - */ -struct cramfs_super { - __u32 magic; /* 0x28cd3d45 - random number */ - __u32 size; /* length in bytes */ - __u32 flags; /* feature flags */ - __u32 future; /* reserved for future use */ - __u8 signature[16]; /* "Compressed ROMFS" */ - struct cramfs_info fsid; /* unique filesystem info */ - __u8 name[16]; /* user-defined name */ - struct cramfs_inode root; /* root inode data */ -}; - -/* - * Feature flags - * - * 0x00000000 - 0x000000ff: features that work for all past kernels - * 0x00000100 - 0xffffffff: features that don't work for past kernels - */ -#define CRAMFS_FLAG_FSID_VERSION_2 0x00000001 /* fsid version #2 */ -#define CRAMFS_FLAG_SORTED_DIRS 0x00000002 /* sorted dirs */ -#define CRAMFS_FLAG_HOLES 0x00000100 /* support for holes */ -#define CRAMFS_FLAG_WRONG_SIGNATURE 0x00000200 /* reserved */ -#define CRAMFS_FLAG_SHIFTED_ROOT_OFFSET 0x00000400 /* shifted root fs */ - -/* - * Valid values in super.flags. Currently we refuse to mount - * if (flags & ~CRAMFS_SUPPORTED_FLAGS). Maybe that should be - * changed to test super.future instead. - */ -#define CRAMFS_SUPPORTED_FLAGS ( 0x000000ff \ - | CRAMFS_FLAG_HOLES \ - | CRAMFS_FLAG_WRONG_SIGNATURE \ - | CRAMFS_FLAG_SHIFTED_ROOT_OFFSET ) - -#ifdef __KERNEL__ /* Uncompression interfaces to the underlying zlib */ int cramfs_uncompress_block(void *dst, int dstlen, void *src, int srclen); int cramfs_uncompress_init(void); void cramfs_uncompress_exit(void); -#endif /* __KERNEL__ */ - #endif diff --git a/include/linux/cuda.h b/include/linux/cuda.h index 9f9865ff781e..b72332823807 100644 --- a/include/linux/cuda.h +++ b/include/linux/cuda.h @@ -4,38 +4,15 @@ * * Copyright (C) 1996 Paul Mackerras. */ - #ifndef _LINUX_CUDA_H #define _LINUX_CUDA_H -/* CUDA commands (2nd byte) */ -#define CUDA_WARM_START 0 -#define CUDA_AUTOPOLL 1 -#define CUDA_GET_6805_ADDR 2 -#define CUDA_GET_TIME 3 -#define CUDA_GET_PRAM 7 -#define CUDA_SET_6805_ADDR 8 -#define CUDA_SET_TIME 9 -#define CUDA_POWERDOWN 0xa -#define CUDA_POWERUP_TIME 0xb -#define CUDA_SET_PRAM 0xc -#define CUDA_MS_RESET 0xd -#define CUDA_SEND_DFAC 0xe -#define CUDA_RESET_SYSTEM 0x11 -#define CUDA_SET_IPL 0x12 -#define CUDA_SET_AUTO_RATE 0x14 -#define CUDA_GET_AUTO_RATE 0x16 -#define CUDA_SET_DEVICE_LIST 0x19 -#define CUDA_GET_DEVICE_LIST 0x1a -#define CUDA_GET_SET_IIC 0x22 +#include <uapi/linux/cuda.h> -#ifdef __KERNEL__ extern int find_via_cuda(void); extern int cuda_request(struct adb_request *req, void (*done)(struct adb_request *), int nbytes, ...); extern void cuda_poll(void); -#endif /* __KERNEL */ - #endif /* _LINUX_CUDA_H */ diff --git a/include/linux/cyclades.h b/include/linux/cyclades.h index a5049eaf782d..19ae518f5471 100644 --- a/include/linux/cyclades.h +++ b/include/linux/cyclades.h @@ -63,434 +63,11 @@ * * */ - #ifndef _LINUX_CYCLADES_H #define _LINUX_CYCLADES_H -#include <linux/types.h> - -struct cyclades_monitor { - unsigned long int_count; - unsigned long char_count; - unsigned long char_max; - unsigned long char_last; -}; - -/* - * These stats all reflect activity since the device was last initialized. - * (i.e., since the port was opened with no other processes already having it - * open) - */ -struct cyclades_idle_stats { - __kernel_time_t in_use; /* Time device has been in use (secs) */ - __kernel_time_t recv_idle; /* Time since last char received (secs) */ - __kernel_time_t xmit_idle; /* Time since last char transmitted (secs) */ - unsigned long recv_bytes; /* Bytes received */ - unsigned long xmit_bytes; /* Bytes transmitted */ - unsigned long overruns; /* Input overruns */ - unsigned long frame_errs; /* Input framing errors */ - unsigned long parity_errs; /* Input parity errors */ -}; - -#define CYCLADES_MAGIC 0x4359 - -#define CYGETMON 0x435901 -#define CYGETTHRESH 0x435902 -#define CYSETTHRESH 0x435903 -#define CYGETDEFTHRESH 0x435904 -#define CYSETDEFTHRESH 0x435905 -#define CYGETTIMEOUT 0x435906 -#define CYSETTIMEOUT 0x435907 -#define CYGETDEFTIMEOUT 0x435908 -#define CYSETDEFTIMEOUT 0x435909 -#define CYSETRFLOW 0x43590a -#define CYGETRFLOW 0x43590b -#define CYSETRTSDTR_INV 0x43590c -#define CYGETRTSDTR_INV 0x43590d -#define CYZSETPOLLCYCLE 0x43590e -#define CYZGETPOLLCYCLE 0x43590f -#define CYGETCD1400VER 0x435910 -#define CYSETWAIT 0x435912 -#define CYGETWAIT 0x435913 - -/*************** CYCLOM-Z ADDITIONS ***************/ - -#define CZIOC ('M' << 8) -#define CZ_NBOARDS (CZIOC|0xfa) -#define CZ_BOOT_START (CZIOC|0xfb) -#define CZ_BOOT_DATA (CZIOC|0xfc) -#define CZ_BOOT_END (CZIOC|0xfd) -#define CZ_TEST (CZIOC|0xfe) - -#define CZ_DEF_POLL (HZ/25) - -#define MAX_BOARD 4 /* Max number of boards */ -#define MAX_DEV 256 /* Max number of ports total */ -#define CYZ_MAX_SPEED 921600 - -#define CYZ_FIFO_SIZE 16 - -#define CYZ_BOOT_NWORDS 0x100 -struct CYZ_BOOT_CTRL { - unsigned short nboard; - int status[MAX_BOARD]; - int nchannel[MAX_BOARD]; - int fw_rev[MAX_BOARD]; - unsigned long offset; - unsigned long data[CYZ_BOOT_NWORDS]; -}; - - -#ifndef DP_WINDOW_SIZE -/* - * Memory Window Sizes - */ - -#define DP_WINDOW_SIZE (0x00080000) /* window size 512 Kb */ -#define ZE_DP_WINDOW_SIZE (0x00100000) /* window size 1 Mb (Ze and - 8Zo V.2 */ -#define CTRL_WINDOW_SIZE (0x00000080) /* runtime regs 128 bytes */ - -/* - * CUSTOM_REG - Cyclom-Z/PCI Custom Registers Set. The driver - * normally will access only interested on the fpga_id, fpga_version, - * start_cpu and stop_cpu. - */ - -struct CUSTOM_REG { - __u32 fpga_id; /* FPGA Identification Register */ - __u32 fpga_version; /* FPGA Version Number Register */ - __u32 cpu_start; /* CPU start Register (write) */ - __u32 cpu_stop; /* CPU stop Register (write) */ - __u32 misc_reg; /* Miscellaneous Register */ - __u32 idt_mode; /* IDT mode Register */ - __u32 uart_irq_status; /* UART IRQ status Register */ - __u32 clear_timer0_irq; /* Clear timer interrupt Register */ - __u32 clear_timer1_irq; /* Clear timer interrupt Register */ - __u32 clear_timer2_irq; /* Clear timer interrupt Register */ - __u32 test_register; /* Test Register */ - __u32 test_count; /* Test Count Register */ - __u32 timer_select; /* Timer select register */ - __u32 pr_uart_irq_status; /* Prioritized UART IRQ stat Reg */ - __u32 ram_wait_state; /* RAM wait-state Register */ - __u32 uart_wait_state; /* UART wait-state Register */ - __u32 timer_wait_state; /* timer wait-state Register */ - __u32 ack_wait_state; /* ACK wait State Register */ -}; - -/* - * RUNTIME_9060 - PLX PCI9060ES local configuration and shared runtime - * registers. This structure can be used to access the 9060 registers - * (memory mapped). - */ - -struct RUNTIME_9060 { - __u32 loc_addr_range; /* 00h - Local Address Range */ - __u32 loc_addr_base; /* 04h - Local Address Base */ - __u32 loc_arbitr; /* 08h - Local Arbitration */ - __u32 endian_descr; /* 0Ch - Big/Little Endian Descriptor */ - __u32 loc_rom_range; /* 10h - Local ROM Range */ - __u32 loc_rom_base; /* 14h - Local ROM Base */ - __u32 loc_bus_descr; /* 18h - Local Bus descriptor */ - __u32 loc_range_mst; /* 1Ch - Local Range for Master to PCI */ - __u32 loc_base_mst; /* 20h - Local Base for Master PCI */ - __u32 loc_range_io; /* 24h - Local Range for Master IO */ - __u32 pci_base_mst; /* 28h - PCI Base for Master PCI */ - __u32 pci_conf_io; /* 2Ch - PCI configuration for Master IO */ - __u32 filler1; /* 30h */ - __u32 filler2; /* 34h */ - __u32 filler3; /* 38h */ - __u32 filler4; /* 3Ch */ - __u32 mail_box_0; /* 40h - Mail Box 0 */ - __u32 mail_box_1; /* 44h - Mail Box 1 */ - __u32 mail_box_2; /* 48h - Mail Box 2 */ - __u32 mail_box_3; /* 4Ch - Mail Box 3 */ - __u32 filler5; /* 50h */ - __u32 filler6; /* 54h */ - __u32 filler7; /* 58h */ - __u32 filler8; /* 5Ch */ - __u32 pci_doorbell; /* 60h - PCI to Local Doorbell */ - __u32 loc_doorbell; /* 64h - Local to PCI Doorbell */ - __u32 intr_ctrl_stat; /* 68h - Interrupt Control/Status */ - __u32 init_ctrl; /* 6Ch - EEPROM control, Init Control, etc */ -}; - -/* Values for the Local Base Address re-map register */ - -#define WIN_RAM 0x00000001L /* set the sliding window to RAM */ -#define WIN_CREG 0x14000001L /* set the window to custom Registers */ - -/* Values timer select registers */ - -#define TIMER_BY_1M 0x00 /* clock divided by 1M */ -#define TIMER_BY_256K 0x01 /* clock divided by 256k */ -#define TIMER_BY_128K 0x02 /* clock divided by 128k */ -#define TIMER_BY_32K 0x03 /* clock divided by 32k */ - -/****************** ****************** *******************/ -#endif - -#ifndef ZFIRM_ID -/* #include "zfwint.h" */ -/****************** ****************** *******************/ -/* - * This file contains the definitions for interfacing with the - * Cyclom-Z ZFIRM Firmware. - */ - -/* General Constant definitions */ - -#define MAX_CHAN 64 /* max number of channels per board */ - -/* firmware id structure (set after boot) */ - -#define ID_ADDRESS 0x00000180L /* signature/pointer address */ -#define ZFIRM_ID 0x5557465AL /* ZFIRM/U signature */ -#define ZFIRM_HLT 0x59505B5CL /* ZFIRM needs external power supply */ -#define ZFIRM_RST 0x56040674L /* RST signal (due to FW reset) */ - -#define ZF_TINACT_DEF 1000 /* default inactivity timeout - (1000 ms) */ -#define ZF_TINACT ZF_TINACT_DEF - -struct FIRM_ID { - __u32 signature; /* ZFIRM/U signature */ - __u32 zfwctrl_addr; /* pointer to ZFW_CTRL structure */ -}; - -/* Op. System id */ - -#define C_OS_LINUX 0x00000030 /* generic Linux system */ - -/* channel op_mode */ - -#define C_CH_DISABLE 0x00000000 /* channel is disabled */ -#define C_CH_TXENABLE 0x00000001 /* channel Tx enabled */ -#define C_CH_RXENABLE 0x00000002 /* channel Rx enabled */ -#define C_CH_ENABLE 0x00000003 /* channel Tx/Rx enabled */ -#define C_CH_LOOPBACK 0x00000004 /* Loopback mode */ - -/* comm_parity - parity */ - -#define C_PR_NONE 0x00000000 /* None */ -#define C_PR_ODD 0x00000001 /* Odd */ -#define C_PR_EVEN 0x00000002 /* Even */ -#define C_PR_MARK 0x00000004 /* Mark */ -#define C_PR_SPACE 0x00000008 /* Space */ -#define C_PR_PARITY 0x000000ff - -#define C_PR_DISCARD 0x00000100 /* discard char with frame/par error */ -#define C_PR_IGNORE 0x00000200 /* ignore frame/par error */ - -/* comm_data_l - data length and stop bits */ - -#define C_DL_CS5 0x00000001 -#define C_DL_CS6 0x00000002 -#define C_DL_CS7 0x00000004 -#define C_DL_CS8 0x00000008 -#define C_DL_CS 0x0000000f -#define C_DL_1STOP 0x00000010 -#define C_DL_15STOP 0x00000020 -#define C_DL_2STOP 0x00000040 -#define C_DL_STOP 0x000000f0 - -/* interrupt enabling/status */ - -#define C_IN_DISABLE 0x00000000 /* zero, disable interrupts */ -#define C_IN_TXBEMPTY 0x00000001 /* tx buffer empty */ -#define C_IN_TXLOWWM 0x00000002 /* tx buffer below LWM */ -#define C_IN_RXHIWM 0x00000010 /* rx buffer above HWM */ -#define C_IN_RXNNDT 0x00000020 /* rx no new data timeout */ -#define C_IN_MDCD 0x00000100 /* modem DCD change */ -#define C_IN_MDSR 0x00000200 /* modem DSR change */ -#define C_IN_MRI 0x00000400 /* modem RI change */ -#define C_IN_MCTS 0x00000800 /* modem CTS change */ -#define C_IN_RXBRK 0x00001000 /* Break received */ -#define C_IN_PR_ERROR 0x00002000 /* parity error */ -#define C_IN_FR_ERROR 0x00004000 /* frame error */ -#define C_IN_OVR_ERROR 0x00008000 /* overrun error */ -#define C_IN_RXOFL 0x00010000 /* RX buffer overflow */ -#define C_IN_IOCTLW 0x00020000 /* I/O control w/ wait */ -#define C_IN_MRTS 0x00040000 /* modem RTS drop */ -#define C_IN_ICHAR 0x00080000 - -/* flow control */ - -#define C_FL_OXX 0x00000001 /* output Xon/Xoff flow control */ -#define C_FL_IXX 0x00000002 /* output Xon/Xoff flow control */ -#define C_FL_OIXANY 0x00000004 /* output Xon/Xoff (any xon) */ -#define C_FL_SWFLOW 0x0000000f - -/* flow status */ - -#define C_FS_TXIDLE 0x00000000 /* no Tx data in the buffer or UART */ -#define C_FS_SENDING 0x00000001 /* UART is sending data */ -#define C_FS_SWFLOW 0x00000002 /* Tx is stopped by received Xoff */ - -/* rs_control/rs_status RS-232 signals */ - -#define C_RS_PARAM 0x80000000 /* Indicates presence of parameter in - IOCTLM command */ -#define C_RS_RTS 0x00000001 /* RTS */ -#define C_RS_DTR 0x00000004 /* DTR */ -#define C_RS_DCD 0x00000100 /* CD */ -#define C_RS_DSR 0x00000200 /* DSR */ -#define C_RS_RI 0x00000400 /* RI */ -#define C_RS_CTS 0x00000800 /* CTS */ - -/* commands Host <-> Board */ - -#define C_CM_RESET 0x01 /* reset/flush buffers */ -#define C_CM_IOCTL 0x02 /* re-read CH_CTRL */ -#define C_CM_IOCTLW 0x03 /* re-read CH_CTRL, intr when done */ -#define C_CM_IOCTLM 0x04 /* RS-232 outputs change */ -#define C_CM_SENDXOFF 0x10 /* send Xoff */ -#define C_CM_SENDXON 0x11 /* send Xon */ -#define C_CM_CLFLOW 0x12 /* Clear flow control (resume) */ -#define C_CM_SENDBRK 0x41 /* send break */ -#define C_CM_INTBACK 0x42 /* Interrupt back */ -#define C_CM_SET_BREAK 0x43 /* Tx break on */ -#define C_CM_CLR_BREAK 0x44 /* Tx break off */ -#define C_CM_CMD_DONE 0x45 /* Previous command done */ -#define C_CM_INTBACK2 0x46 /* Alternate Interrupt back */ -#define C_CM_TINACT 0x51 /* set inactivity detection */ -#define C_CM_IRQ_ENBL 0x52 /* enable generation of interrupts */ -#define C_CM_IRQ_DSBL 0x53 /* disable generation of interrupts */ -#define C_CM_ACK_ENBL 0x54 /* enable acknowledged interrupt mode */ -#define C_CM_ACK_DSBL 0x55 /* disable acknowledged intr mode */ -#define C_CM_FLUSH_RX 0x56 /* flushes Rx buffer */ -#define C_CM_FLUSH_TX 0x57 /* flushes Tx buffer */ -#define C_CM_Q_ENABLE 0x58 /* enables queue access from the - driver */ -#define C_CM_Q_DISABLE 0x59 /* disables queue access from the - driver */ - -#define C_CM_TXBEMPTY 0x60 /* Tx buffer is empty */ -#define C_CM_TXLOWWM 0x61 /* Tx buffer low water mark */ -#define C_CM_RXHIWM 0x62 /* Rx buffer high water mark */ -#define C_CM_RXNNDT 0x63 /* rx no new data timeout */ -#define C_CM_TXFEMPTY 0x64 -#define C_CM_ICHAR 0x65 -#define C_CM_MDCD 0x70 /* modem DCD change */ -#define C_CM_MDSR 0x71 /* modem DSR change */ -#define C_CM_MRI 0x72 /* modem RI change */ -#define C_CM_MCTS 0x73 /* modem CTS change */ -#define C_CM_MRTS 0x74 /* modem RTS drop */ -#define C_CM_RXBRK 0x84 /* Break received */ -#define C_CM_PR_ERROR 0x85 /* Parity error */ -#define C_CM_FR_ERROR 0x86 /* Frame error */ -#define C_CM_OVR_ERROR 0x87 /* Overrun error */ -#define C_CM_RXOFL 0x88 /* RX buffer overflow */ -#define C_CM_CMDERROR 0x90 /* command error */ -#define C_CM_FATAL 0x91 /* fatal error */ -#define C_CM_HW_RESET 0x92 /* reset board */ - -/* - * CH_CTRL - This per port structure contains all parameters - * that control an specific port. It can be seen as the - * configuration registers of a "super-serial-controller". - */ - -struct CH_CTRL { - __u32 op_mode; /* operation mode */ - __u32 intr_enable; /* interrupt masking */ - __u32 sw_flow; /* SW flow control */ - __u32 flow_status; /* output flow status */ - __u32 comm_baud; /* baud rate - numerically specified */ - __u32 comm_parity; /* parity */ - __u32 comm_data_l; /* data length/stop */ - __u32 comm_flags; /* other flags */ - __u32 hw_flow; /* HW flow control */ - __u32 rs_control; /* RS-232 outputs */ - __u32 rs_status; /* RS-232 inputs */ - __u32 flow_xon; /* xon char */ - __u32 flow_xoff; /* xoff char */ - __u32 hw_overflow; /* hw overflow counter */ - __u32 sw_overflow; /* sw overflow counter */ - __u32 comm_error; /* frame/parity error counter */ - __u32 ichar; - __u32 filler[7]; -}; - - -/* - * BUF_CTRL - This per channel structure contains - * all Tx and Rx buffer control for a given channel. - */ - -struct BUF_CTRL { - __u32 flag_dma; /* buffers are in Host memory */ - __u32 tx_bufaddr; /* address of the tx buffer */ - __u32 tx_bufsize; /* tx buffer size */ - __u32 tx_threshold; /* tx low water mark */ - __u32 tx_get; /* tail index tx buf */ - __u32 tx_put; /* head index tx buf */ - __u32 rx_bufaddr; /* address of the rx buffer */ - __u32 rx_bufsize; /* rx buffer size */ - __u32 rx_threshold; /* rx high water mark */ - __u32 rx_get; /* tail index rx buf */ - __u32 rx_put; /* head index rx buf */ - __u32 filler[5]; /* filler to align structures */ -}; - -/* - * BOARD_CTRL - This per board structure contains all global - * control fields related to the board. - */ - -struct BOARD_CTRL { - - /* static info provided by the on-board CPU */ - __u32 n_channel; /* number of channels */ - __u32 fw_version; /* firmware version */ - - /* static info provided by the driver */ - __u32 op_system; /* op_system id */ - __u32 dr_version; /* driver version */ - - /* board control area */ - __u32 inactivity; /* inactivity control */ - - /* host to FW commands */ - __u32 hcmd_channel; /* channel number */ - __u32 hcmd_param; /* pointer to parameters */ - - /* FW to Host commands */ - __u32 fwcmd_channel; /* channel number */ - __u32 fwcmd_param; /* pointer to parameters */ - __u32 zf_int_queue_addr; /* offset for INT_QUEUE structure */ - - /* filler so the structures are aligned */ - __u32 filler[6]; -}; - -/* Host Interrupt Queue */ - -#define QUEUE_SIZE (10*MAX_CHAN) - -struct INT_QUEUE { - unsigned char intr_code[QUEUE_SIZE]; - unsigned long channel[QUEUE_SIZE]; - unsigned long param[QUEUE_SIZE]; - unsigned long put; - unsigned long get; -}; - -/* - * ZFW_CTRL - This is the data structure that includes all other - * data structures used by the Firmware. - */ - -struct ZFW_CTRL { - struct BOARD_CTRL board_ctrl; - struct CH_CTRL ch_ctrl[MAX_CHAN]; - struct BUF_CTRL buf_ctrl[MAX_CHAN]; -}; - -/****************** ****************** *******************/ -#endif +#include <uapi/linux/cyclades.h> -#ifdef __KERNEL__ /* Per card data structure */ struct cyclades_card { @@ -780,5 +357,4 @@ struct cyclades_port { /***************************************************************************/ -#endif /* __KERNEL__ */ #endif /* _LINUX_CYCLADES_H */ diff --git a/include/linux/dccp.h b/include/linux/dccp.h index d16294e2a118..439ff698000a 100644 --- a/include/linux/dccp.h +++ b/include/linux/dccp.h @@ -1,239 +1,6 @@ #ifndef _LINUX_DCCP_H #define _LINUX_DCCP_H -#include <linux/types.h> -#include <asm/byteorder.h> - -/** - * struct dccp_hdr - generic part of DCCP packet header - * - * @dccph_sport - Relevant port on the endpoint that sent this packet - * @dccph_dport - Relevant port on the other endpoint - * @dccph_doff - Data Offset from the start of the DCCP header, in 32-bit words - * @dccph_ccval - Used by the HC-Sender CCID - * @dccph_cscov - Parts of the packet that are covered by the Checksum field - * @dccph_checksum - Internet checksum, depends on dccph_cscov - * @dccph_x - 0 = 24 bit sequence number, 1 = 48 - * @dccph_type - packet type, see DCCP_PKT_ prefixed macros - * @dccph_seq - sequence number high or low order 24 bits, depends on dccph_x - */ -struct dccp_hdr { - __be16 dccph_sport, - dccph_dport; - __u8 dccph_doff; -#if defined(__LITTLE_ENDIAN_BITFIELD) - __u8 dccph_cscov:4, - dccph_ccval:4; -#elif defined(__BIG_ENDIAN_BITFIELD) - __u8 dccph_ccval:4, - dccph_cscov:4; -#else -#error "Adjust your <asm/byteorder.h> defines" -#endif - __sum16 dccph_checksum; -#if defined(__LITTLE_ENDIAN_BITFIELD) - __u8 dccph_x:1, - dccph_type:4, - dccph_reserved:3; -#elif defined(__BIG_ENDIAN_BITFIELD) - __u8 dccph_reserved:3, - dccph_type:4, - dccph_x:1; -#else -#error "Adjust your <asm/byteorder.h> defines" -#endif - __u8 dccph_seq2; - __be16 dccph_seq; -}; - -/** - * struct dccp_hdr_ext - the low bits of a 48 bit seq packet - * - * @dccph_seq_low - low 24 bits of a 48 bit seq packet - */ -struct dccp_hdr_ext { - __be32 dccph_seq_low; -}; - -/** - * struct dccp_hdr_request - Connection initiation request header - * - * @dccph_req_service - Service to which the client app wants to connect - */ -struct dccp_hdr_request { - __be32 dccph_req_service; -}; -/** - * struct dccp_hdr_ack_bits - acknowledgment bits common to most packets - * - * @dccph_resp_ack_nr_high - 48 bit ack number high order bits, contains GSR - * @dccph_resp_ack_nr_low - 48 bit ack number low order bits, contains GSR - */ -struct dccp_hdr_ack_bits { - __be16 dccph_reserved1; - __be16 dccph_ack_nr_high; - __be32 dccph_ack_nr_low; -}; -/** - * struct dccp_hdr_response - Connection initiation response header - * - * @dccph_resp_ack - 48 bit Acknowledgment Number Subheader (5.3) - * @dccph_resp_service - Echoes the Service Code on a received DCCP-Request - */ -struct dccp_hdr_response { - struct dccp_hdr_ack_bits dccph_resp_ack; - __be32 dccph_resp_service; -}; - -/** - * struct dccp_hdr_reset - Unconditionally shut down a connection - * - * @dccph_reset_ack - 48 bit Acknowledgment Number Subheader (5.6) - * @dccph_reset_code - one of %dccp_reset_codes - * @dccph_reset_data - the Data 1 ... Data 3 fields from 5.6 - */ -struct dccp_hdr_reset { - struct dccp_hdr_ack_bits dccph_reset_ack; - __u8 dccph_reset_code, - dccph_reset_data[3]; -}; - -enum dccp_pkt_type { - DCCP_PKT_REQUEST = 0, - DCCP_PKT_RESPONSE, - DCCP_PKT_DATA, - DCCP_PKT_ACK, - DCCP_PKT_DATAACK, - DCCP_PKT_CLOSEREQ, - DCCP_PKT_CLOSE, - DCCP_PKT_RESET, - DCCP_PKT_SYNC, - DCCP_PKT_SYNCACK, - DCCP_PKT_INVALID, -}; - -#define DCCP_NR_PKT_TYPES DCCP_PKT_INVALID - -static inline unsigned int dccp_packet_hdr_len(const __u8 type) -{ - if (type == DCCP_PKT_DATA) - return 0; - if (type == DCCP_PKT_DATAACK || - type == DCCP_PKT_ACK || - type == DCCP_PKT_SYNC || - type == DCCP_PKT_SYNCACK || - type == DCCP_PKT_CLOSE || - type == DCCP_PKT_CLOSEREQ) - return sizeof(struct dccp_hdr_ack_bits); - if (type == DCCP_PKT_REQUEST) - return sizeof(struct dccp_hdr_request); - if (type == DCCP_PKT_RESPONSE) - return sizeof(struct dccp_hdr_response); - return sizeof(struct dccp_hdr_reset); -} -enum dccp_reset_codes { - DCCP_RESET_CODE_UNSPECIFIED = 0, - DCCP_RESET_CODE_CLOSED, - DCCP_RESET_CODE_ABORTED, - DCCP_RESET_CODE_NO_CONNECTION, - DCCP_RESET_CODE_PACKET_ERROR, - DCCP_RESET_CODE_OPTION_ERROR, - DCCP_RESET_CODE_MANDATORY_ERROR, - DCCP_RESET_CODE_CONNECTION_REFUSED, - DCCP_RESET_CODE_BAD_SERVICE_CODE, - DCCP_RESET_CODE_TOO_BUSY, - DCCP_RESET_CODE_BAD_INIT_COOKIE, - DCCP_RESET_CODE_AGGRESSION_PENALTY, - - DCCP_MAX_RESET_CODES /* Leave at the end! */ -}; - -/* DCCP options */ -enum { - DCCPO_PADDING = 0, - DCCPO_MANDATORY = 1, - DCCPO_MIN_RESERVED = 3, - DCCPO_MAX_RESERVED = 31, - DCCPO_CHANGE_L = 32, - DCCPO_CONFIRM_L = 33, - DCCPO_CHANGE_R = 34, - DCCPO_CONFIRM_R = 35, - DCCPO_NDP_COUNT = 37, - DCCPO_ACK_VECTOR_0 = 38, - DCCPO_ACK_VECTOR_1 = 39, - DCCPO_TIMESTAMP = 41, - DCCPO_TIMESTAMP_ECHO = 42, - DCCPO_ELAPSED_TIME = 43, - DCCPO_MAX = 45, - DCCPO_MIN_RX_CCID_SPECIFIC = 128, /* from sender to receiver */ - DCCPO_MAX_RX_CCID_SPECIFIC = 191, - DCCPO_MIN_TX_CCID_SPECIFIC = 192, /* from receiver to sender */ - DCCPO_MAX_TX_CCID_SPECIFIC = 255, -}; -/* maximum size of a single TLV-encoded DCCP option (sans type/len bytes) */ -#define DCCP_SINGLE_OPT_MAXLEN 253 - -/* DCCP CCIDS */ -enum { - DCCPC_CCID2 = 2, - DCCPC_CCID3 = 3, -}; - -/* DCCP features (RFC 4340 section 6.4) */ -enum dccp_feature_numbers { - DCCPF_RESERVED = 0, - DCCPF_CCID = 1, - DCCPF_SHORT_SEQNOS = 2, - DCCPF_SEQUENCE_WINDOW = 3, - DCCPF_ECN_INCAPABLE = 4, - DCCPF_ACK_RATIO = 5, - DCCPF_SEND_ACK_VECTOR = 6, - DCCPF_SEND_NDP_COUNT = 7, - DCCPF_MIN_CSUM_COVER = 8, - DCCPF_DATA_CHECKSUM = 9, - /* 10-127 reserved */ - DCCPF_MIN_CCID_SPECIFIC = 128, - DCCPF_SEND_LEV_RATE = 192, /* RFC 4342, sec. 8.4 */ - DCCPF_MAX_CCID_SPECIFIC = 255, -}; - -/* DCCP socket control message types for cmsg */ -enum dccp_cmsg_type { - DCCP_SCM_PRIORITY = 1, - DCCP_SCM_QPOLICY_MAX = 0xFFFF, - /* ^-- Up to here reserved exclusively for qpolicy parameters */ - DCCP_SCM_MAX -}; - -/* DCCP priorities for outgoing/queued packets */ -enum dccp_packet_dequeueing_policy { - DCCPQ_POLICY_SIMPLE, - DCCPQ_POLICY_PRIO, - DCCPQ_POLICY_MAX -}; - -/* DCCP socket options */ -#define DCCP_SOCKOPT_PACKET_SIZE 1 /* XXX deprecated, without effect */ -#define DCCP_SOCKOPT_SERVICE 2 -#define DCCP_SOCKOPT_CHANGE_L 3 -#define DCCP_SOCKOPT_CHANGE_R 4 -#define DCCP_SOCKOPT_GET_CUR_MPS 5 -#define DCCP_SOCKOPT_SERVER_TIMEWAIT 6 -#define DCCP_SOCKOPT_SEND_CSCOV 10 -#define DCCP_SOCKOPT_RECV_CSCOV 11 -#define DCCP_SOCKOPT_AVAILABLE_CCIDS 12 -#define DCCP_SOCKOPT_CCID 13 -#define DCCP_SOCKOPT_TX_CCID 14 -#define DCCP_SOCKOPT_RX_CCID 15 -#define DCCP_SOCKOPT_QPOLICY_ID 16 -#define DCCP_SOCKOPT_QPOLICY_TXQLEN 17 -#define DCCP_SOCKOPT_CCID_RX_INFO 128 -#define DCCP_SOCKOPT_CCID_TX_INFO 192 - -/* maximum number of services provided on the same listening port */ -#define DCCP_SERVICE_LIST_MAX_LEN 32 - -#ifdef __KERNEL__ #include <linux/in.h> #include <linux/interrupt.h> @@ -246,6 +13,7 @@ enum dccp_packet_dequeueing_policy { #include <net/inet_sock.h> #include <net/inet_timewait_sock.h> #include <net/tcp_states.h> +#include <uapi/linux/dccp.h> enum dccp_state { DCCP_OPEN = TCP_ESTABLISHED, @@ -551,6 +319,4 @@ static inline const char *dccp_role(const struct sock *sk) extern void dccp_syn_ack_timeout(struct sock *sk, struct request_sock *req); -#endif /* __KERNEL__ */ - #endif /* _LINUX_DCCP_H */ diff --git a/include/linux/dlm.h b/include/linux/dlm.h index 520152411cd1..1d47dcce11e1 100644 --- a/include/linux/dlm.h +++ b/include/linux/dlm.h @@ -10,68 +10,11 @@ ** ******************************************************************************* ******************************************************************************/ - #ifndef __DLM_DOT_H__ #define __DLM_DOT_H__ -/* - * Interface to Distributed Lock Manager (DLM) - * routines and structures to use DLM lockspaces - */ - -/* Lock levels and flags are here */ -#include <linux/dlmconstants.h> -#include <linux/types.h> - -typedef void dlm_lockspace_t; - -/* - * Lock status block - * - * Use this structure to specify the contents of the lock value block. For a - * conversion request, this structure is used to specify the lock ID of the - * lock. DLM writes the status of the lock request and the lock ID assigned - * to the request in the lock status block. - * - * sb_lkid: the returned lock ID. It is set on new (non-conversion) requests. - * It is available when dlm_lock returns. - * - * sb_lvbptr: saves or returns the contents of the lock's LVB according to rules - * shown for the DLM_LKF_VALBLK flag. - * - * sb_flags: DLM_SBF_DEMOTED is returned if in the process of promoting a lock, - * it was first demoted to NL to avoid conversion deadlock. - * DLM_SBF_VALNOTVALID is returned if the resource's LVB is marked invalid. - * - * sb_status: the returned status of the lock request set prior to AST - * execution. Possible return values: - * - * 0 if lock request was successful - * -EAGAIN if request would block and is flagged DLM_LKF_NOQUEUE - * -DLM_EUNLOCK if unlock request was successful - * -DLM_ECANCEL if a cancel completed successfully - * -EDEADLK if a deadlock was detected - * -ETIMEDOUT if the lock request was canceled due to a timeout - */ - -#define DLM_SBF_DEMOTED 0x01 -#define DLM_SBF_VALNOTVALID 0x02 -#define DLM_SBF_ALTMODE 0x04 +#include <uapi/linux/dlm.h> -struct dlm_lksb { - int sb_status; - __u32 sb_lkid; - char sb_flags; - char * sb_lvbptr; -}; - -/* dlm_new_lockspace() flags */ - -#define DLM_LSFL_TIMEWARN 0x00000002 -#define DLM_LSFL_FS 0x00000004 -#define DLM_LSFL_NEWEXCL 0x00000008 - -#ifdef __KERNEL__ struct dlm_slot { int nodeid; /* 1 to MAX_INT */ @@ -226,7 +169,4 @@ int dlm_unlock(dlm_lockspace_t *lockspace, struct dlm_lksb *lksb, void *astarg); -#endif /* __KERNEL__ */ - #endif /* __DLM_DOT_H__ */ - diff --git a/include/linux/dlm_plock.h b/include/linux/dlm_plock.h index 3b1cc1be419f..95ad387a7769 100644 --- a/include/linux/dlm_plock.h +++ b/include/linux/dlm_plock.h @@ -5,50 +5,15 @@ * modify, copy, or redistribute it subject to the terms and conditions * of the GNU General Public License v.2. */ - #ifndef __DLM_PLOCK_DOT_H__ #define __DLM_PLOCK_DOT_H__ -#include <linux/types.h> - -#define DLM_PLOCK_MISC_NAME "dlm_plock" - -#define DLM_PLOCK_VERSION_MAJOR 1 -#define DLM_PLOCK_VERSION_MINOR 2 -#define DLM_PLOCK_VERSION_PATCH 0 - -enum { - DLM_PLOCK_OP_LOCK = 1, - DLM_PLOCK_OP_UNLOCK, - DLM_PLOCK_OP_GET, -}; +#include <uapi/linux/dlm_plock.h> -#define DLM_PLOCK_FL_CLOSE 1 - -struct dlm_plock_info { - __u32 version[3]; - __u8 optype; - __u8 ex; - __u8 wait; - __u8 flags; - __u32 pid; - __s32 nodeid; - __s32 rv; - __u32 fsid; - __u64 number; - __u64 start; - __u64 end; - __u64 owner; -}; - -#ifdef __KERNEL__ int dlm_posix_lock(dlm_lockspace_t *lockspace, u64 number, struct file *file, int cmd, struct file_lock *fl); int dlm_posix_unlock(dlm_lockspace_t *lockspace, u64 number, struct file *file, struct file_lock *fl); int dlm_posix_get(dlm_lockspace_t *lockspace, u64 number, struct file *file, struct file_lock *fl); -#endif /* __KERNEL__ */ - #endif - diff --git a/include/linux/edd.h b/include/linux/edd.h index 4cbd0fe9df08..83d4371ec996 100644 --- a/include/linux/edd.h +++ b/include/linux/edd.h @@ -30,165 +30,9 @@ #ifndef _LINUX_EDD_H #define _LINUX_EDD_H -#include <linux/types.h> - -#define EDDNR 0x1e9 /* addr of number of edd_info structs at EDDBUF - in boot_params - treat this as 1 byte */ -#define EDDBUF 0xd00 /* addr of edd_info structs in boot_params */ -#define EDDMAXNR 6 /* number of edd_info structs starting at EDDBUF */ -#define EDDEXTSIZE 8 /* change these if you muck with the structures */ -#define EDDPARMSIZE 74 -#define CHECKEXTENSIONSPRESENT 0x41 -#define GETDEVICEPARAMETERS 0x48 -#define LEGACYGETDEVICEPARAMETERS 0x08 -#define EDDMAGIC1 0x55AA -#define EDDMAGIC2 0xAA55 - - -#define READ_SECTORS 0x02 /* int13 AH=0x02 is READ_SECTORS command */ -#define EDD_MBR_SIG_OFFSET 0x1B8 /* offset of signature in the MBR */ -#define EDD_MBR_SIG_BUF 0x290 /* addr in boot params */ -#define EDD_MBR_SIG_MAX 16 /* max number of signatures to store */ -#define EDD_MBR_SIG_NR_BUF 0x1ea /* addr of number of MBR signtaures at EDD_MBR_SIG_BUF - in boot_params - treat this as 1 byte */ +#include <uapi/linux/edd.h> #ifndef __ASSEMBLY__ - -#define EDD_EXT_FIXED_DISK_ACCESS (1 << 0) -#define EDD_EXT_DEVICE_LOCKING_AND_EJECTING (1 << 1) -#define EDD_EXT_ENHANCED_DISK_DRIVE_SUPPORT (1 << 2) -#define EDD_EXT_64BIT_EXTENSIONS (1 << 3) - -#define EDD_INFO_DMA_BOUNDARY_ERROR_TRANSPARENT (1 << 0) -#define EDD_INFO_GEOMETRY_VALID (1 << 1) -#define EDD_INFO_REMOVABLE (1 << 2) -#define EDD_INFO_WRITE_VERIFY (1 << 3) -#define EDD_INFO_MEDIA_CHANGE_NOTIFICATION (1 << 4) -#define EDD_INFO_LOCKABLE (1 << 5) -#define EDD_INFO_NO_MEDIA_PRESENT (1 << 6) -#define EDD_INFO_USE_INT13_FN50 (1 << 7) - -struct edd_device_params { - __u16 length; - __u16 info_flags; - __u32 num_default_cylinders; - __u32 num_default_heads; - __u32 sectors_per_track; - __u64 number_of_sectors; - __u16 bytes_per_sector; - __u32 dpte_ptr; /* 0xFFFFFFFF for our purposes */ - __u16 key; /* = 0xBEDD */ - __u8 device_path_info_length; /* = 44 */ - __u8 reserved2; - __u16 reserved3; - __u8 host_bus_type[4]; - __u8 interface_type[8]; - union { - struct { - __u16 base_address; - __u16 reserved1; - __u32 reserved2; - } __attribute__ ((packed)) isa; - struct { - __u8 bus; - __u8 slot; - __u8 function; - __u8 channel; - __u32 reserved; - } __attribute__ ((packed)) pci; - /* pcix is same as pci */ - struct { - __u64 reserved; - } __attribute__ ((packed)) ibnd; - struct { - __u64 reserved; - } __attribute__ ((packed)) xprs; - struct { - __u64 reserved; - } __attribute__ ((packed)) htpt; - struct { - __u64 reserved; - } __attribute__ ((packed)) unknown; - } interface_path; - union { - struct { - __u8 device; - __u8 reserved1; - __u16 reserved2; - __u32 reserved3; - __u64 reserved4; - } __attribute__ ((packed)) ata; - struct { - __u8 device; - __u8 lun; - __u8 reserved1; - __u8 reserved2; - __u32 reserved3; - __u64 reserved4; - } __attribute__ ((packed)) atapi; - struct { - __u16 id; - __u64 lun; - __u16 reserved1; - __u32 reserved2; - } __attribute__ ((packed)) scsi; - struct { - __u64 serial_number; - __u64 reserved; - } __attribute__ ((packed)) usb; - struct { - __u64 eui; - __u64 reserved; - } __attribute__ ((packed)) i1394; - struct { - __u64 wwid; - __u64 lun; - } __attribute__ ((packed)) fibre; - struct { - __u64 identity_tag; - __u64 reserved; - } __attribute__ ((packed)) i2o; - struct { - __u32 array_number; - __u32 reserved1; - __u64 reserved2; - } __attribute__ ((packed)) raid; - struct { - __u8 device; - __u8 reserved1; - __u16 reserved2; - __u32 reserved3; - __u64 reserved4; - } __attribute__ ((packed)) sata; - struct { - __u64 reserved1; - __u64 reserved2; - } __attribute__ ((packed)) unknown; - } device_path; - __u8 reserved4; - __u8 checksum; -} __attribute__ ((packed)); - -struct edd_info { - __u8 device; - __u8 version; - __u16 interface_support; - __u16 legacy_max_cylinder; - __u8 legacy_max_head; - __u8 legacy_sectors_per_track; - struct edd_device_params params; -} __attribute__ ((packed)); - -struct edd { - unsigned int mbr_signature[EDD_MBR_SIG_MAX]; - struct edd_info edd_info[EDDMAXNR]; - unsigned char mbr_signature_nr; - unsigned char edd_info_nr; -}; - -#ifdef __KERNEL__ extern struct edd edd; -#endif /* __KERNEL__ */ #endif /*!__ASSEMBLY__ */ - #endif /* _LINUX_EDD_H */ diff --git a/include/linux/elf.h b/include/linux/elf.h index 59ef40650e1e..8c9048e33463 100644 --- a/include/linux/elf.h +++ b/include/linux/elf.h @@ -1,420 +1,9 @@ #ifndef _LINUX_ELF_H #define _LINUX_ELF_H -#include <linux/types.h> -#include <linux/elf-em.h> -#ifdef __KERNEL__ #include <asm/elf.h> -#endif - -/* 32-bit ELF base types. */ -typedef __u32 Elf32_Addr; -typedef __u16 Elf32_Half; -typedef __u32 Elf32_Off; -typedef __s32 Elf32_Sword; -typedef __u32 Elf32_Word; - -/* 64-bit ELF base types. */ -typedef __u64 Elf64_Addr; -typedef __u16 Elf64_Half; -typedef __s16 Elf64_SHalf; -typedef __u64 Elf64_Off; -typedef __s32 Elf64_Sword; -typedef __u32 Elf64_Word; -typedef __u64 Elf64_Xword; -typedef __s64 Elf64_Sxword; - -/* These constants are for the segment types stored in the image headers */ -#define PT_NULL 0 -#define PT_LOAD 1 -#define PT_DYNAMIC 2 -#define PT_INTERP 3 -#define PT_NOTE 4 -#define PT_SHLIB 5 -#define PT_PHDR 6 -#define PT_TLS 7 /* Thread local storage segment */ -#define PT_LOOS 0x60000000 /* OS-specific */ -#define PT_HIOS 0x6fffffff /* OS-specific */ -#define PT_LOPROC 0x70000000 -#define PT_HIPROC 0x7fffffff -#define PT_GNU_EH_FRAME 0x6474e550 - -#define PT_GNU_STACK (PT_LOOS + 0x474e551) - -/* - * Extended Numbering - * - * If the real number of program header table entries is larger than - * or equal to PN_XNUM(0xffff), it is set to sh_info field of the - * section header at index 0, and PN_XNUM is set to e_phnum - * field. Otherwise, the section header at index 0 is zero - * initialized, if it exists. - * - * Specifications are available in: - * - * - Sun microsystems: Linker and Libraries. - * Part No: 817-1984-17, September 2008. - * URL: http://docs.sun.com/app/docs/doc/817-1984 - * - * - System V ABI AMD64 Architecture Processor Supplement - * Draft Version 0.99., - * May 11, 2009. - * URL: http://www.x86-64.org/ - */ -#define PN_XNUM 0xffff - -/* These constants define the different elf file types */ -#define ET_NONE 0 -#define ET_REL 1 -#define ET_EXEC 2 -#define ET_DYN 3 -#define ET_CORE 4 -#define ET_LOPROC 0xff00 -#define ET_HIPROC 0xffff - -/* This is the info that is needed to parse the dynamic section of the file */ -#define DT_NULL 0 -#define DT_NEEDED 1 -#define DT_PLTRELSZ 2 -#define DT_PLTGOT 3 -#define DT_HASH 4 -#define DT_STRTAB 5 -#define DT_SYMTAB 6 -#define DT_RELA 7 -#define DT_RELASZ 8 -#define DT_RELAENT 9 -#define DT_STRSZ 10 -#define DT_SYMENT 11 -#define DT_INIT 12 -#define DT_FINI 13 -#define DT_SONAME 14 -#define DT_RPATH 15 -#define DT_SYMBOLIC 16 -#define DT_REL 17 -#define DT_RELSZ 18 -#define DT_RELENT 19 -#define DT_PLTREL 20 -#define DT_DEBUG 21 -#define DT_TEXTREL 22 -#define DT_JMPREL 23 -#define DT_ENCODING 32 -#define OLD_DT_LOOS 0x60000000 -#define DT_LOOS 0x6000000d -#define DT_HIOS 0x6ffff000 -#define DT_VALRNGLO 0x6ffffd00 -#define DT_VALRNGHI 0x6ffffdff -#define DT_ADDRRNGLO 0x6ffffe00 -#define DT_ADDRRNGHI 0x6ffffeff -#define DT_VERSYM 0x6ffffff0 -#define DT_RELACOUNT 0x6ffffff9 -#define DT_RELCOUNT 0x6ffffffa -#define DT_FLAGS_1 0x6ffffffb -#define DT_VERDEF 0x6ffffffc -#define DT_VERDEFNUM 0x6ffffffd -#define DT_VERNEED 0x6ffffffe -#define DT_VERNEEDNUM 0x6fffffff -#define OLD_DT_HIOS 0x6fffffff -#define DT_LOPROC 0x70000000 -#define DT_HIPROC 0x7fffffff - -/* This info is needed when parsing the symbol table */ -#define STB_LOCAL 0 -#define STB_GLOBAL 1 -#define STB_WEAK 2 - -#define STT_NOTYPE 0 -#define STT_OBJECT 1 -#define STT_FUNC 2 -#define STT_SECTION 3 -#define STT_FILE 4 -#define STT_COMMON 5 -#define STT_TLS 6 - -#define ELF_ST_BIND(x) ((x) >> 4) -#define ELF_ST_TYPE(x) (((unsigned int) x) & 0xf) -#define ELF32_ST_BIND(x) ELF_ST_BIND(x) -#define ELF32_ST_TYPE(x) ELF_ST_TYPE(x) -#define ELF64_ST_BIND(x) ELF_ST_BIND(x) -#define ELF64_ST_TYPE(x) ELF_ST_TYPE(x) - -typedef struct dynamic{ - Elf32_Sword d_tag; - union{ - Elf32_Sword d_val; - Elf32_Addr d_ptr; - } d_un; -} Elf32_Dyn; - -typedef struct { - Elf64_Sxword d_tag; /* entry tag value */ - union { - Elf64_Xword d_val; - Elf64_Addr d_ptr; - } d_un; -} Elf64_Dyn; - -/* The following are used with relocations */ -#define ELF32_R_SYM(x) ((x) >> 8) -#define ELF32_R_TYPE(x) ((x) & 0xff) - -#define ELF64_R_SYM(i) ((i) >> 32) -#define ELF64_R_TYPE(i) ((i) & 0xffffffff) - -typedef struct elf32_rel { - Elf32_Addr r_offset; - Elf32_Word r_info; -} Elf32_Rel; - -typedef struct elf64_rel { - Elf64_Addr r_offset; /* Location at which to apply the action */ - Elf64_Xword r_info; /* index and type of relocation */ -} Elf64_Rel; - -typedef struct elf32_rela{ - Elf32_Addr r_offset; - Elf32_Word r_info; - Elf32_Sword r_addend; -} Elf32_Rela; - -typedef struct elf64_rela { - Elf64_Addr r_offset; /* Location at which to apply the action */ - Elf64_Xword r_info; /* index and type of relocation */ - Elf64_Sxword r_addend; /* Constant addend used to compute value */ -} Elf64_Rela; - -typedef struct elf32_sym{ - Elf32_Word st_name; - Elf32_Addr st_value; - Elf32_Word st_size; - unsigned char st_info; - unsigned char st_other; - Elf32_Half st_shndx; -} Elf32_Sym; - -typedef struct elf64_sym { - Elf64_Word st_name; /* Symbol name, index in string tbl */ - unsigned char st_info; /* Type and binding attributes */ - unsigned char st_other; /* No defined meaning, 0 */ - Elf64_Half st_shndx; /* Associated section index */ - Elf64_Addr st_value; /* Value of the symbol */ - Elf64_Xword st_size; /* Associated symbol size */ -} Elf64_Sym; - - -#define EI_NIDENT 16 - -typedef struct elf32_hdr{ - unsigned char e_ident[EI_NIDENT]; - Elf32_Half e_type; - Elf32_Half e_machine; - Elf32_Word e_version; - Elf32_Addr e_entry; /* Entry point */ - Elf32_Off e_phoff; - Elf32_Off e_shoff; - Elf32_Word e_flags; - Elf32_Half e_ehsize; - Elf32_Half e_phentsize; - Elf32_Half e_phnum; - Elf32_Half e_shentsize; - Elf32_Half e_shnum; - Elf32_Half e_shstrndx; -} Elf32_Ehdr; - -typedef struct elf64_hdr { - unsigned char e_ident[EI_NIDENT]; /* ELF "magic number" */ - Elf64_Half e_type; - Elf64_Half e_machine; - Elf64_Word e_version; - Elf64_Addr e_entry; /* Entry point virtual address */ - Elf64_Off e_phoff; /* Program header table file offset */ - Elf64_Off e_shoff; /* Section header table file offset */ - Elf64_Word e_flags; - Elf64_Half e_ehsize; - Elf64_Half e_phentsize; - Elf64_Half e_phnum; - Elf64_Half e_shentsize; - Elf64_Half e_shnum; - Elf64_Half e_shstrndx; -} Elf64_Ehdr; - -/* These constants define the permissions on sections in the program - header, p_flags. */ -#define PF_R 0x4 -#define PF_W 0x2 -#define PF_X 0x1 - -typedef struct elf32_phdr{ - Elf32_Word p_type; - Elf32_Off p_offset; - Elf32_Addr p_vaddr; - Elf32_Addr p_paddr; - Elf32_Word p_filesz; - Elf32_Word p_memsz; - Elf32_Word p_flags; - Elf32_Word p_align; -} Elf32_Phdr; - -typedef struct elf64_phdr { - Elf64_Word p_type; - Elf64_Word p_flags; - Elf64_Off p_offset; /* Segment file offset */ - Elf64_Addr p_vaddr; /* Segment virtual address */ - Elf64_Addr p_paddr; /* Segment physical address */ - Elf64_Xword p_filesz; /* Segment size in file */ - Elf64_Xword p_memsz; /* Segment size in memory */ - Elf64_Xword p_align; /* Segment alignment, file & memory */ -} Elf64_Phdr; - -/* sh_type */ -#define SHT_NULL 0 -#define SHT_PROGBITS 1 -#define SHT_SYMTAB 2 -#define SHT_STRTAB 3 -#define SHT_RELA 4 -#define SHT_HASH 5 -#define SHT_DYNAMIC 6 -#define SHT_NOTE 7 -#define SHT_NOBITS 8 -#define SHT_REL 9 -#define SHT_SHLIB 10 -#define SHT_DYNSYM 11 -#define SHT_NUM 12 -#define SHT_LOPROC 0x70000000 -#define SHT_HIPROC 0x7fffffff -#define SHT_LOUSER 0x80000000 -#define SHT_HIUSER 0xffffffff - -/* sh_flags */ -#define SHF_WRITE 0x1 -#define SHF_ALLOC 0x2 -#define SHF_EXECINSTR 0x4 -#define SHF_MASKPROC 0xf0000000 - -/* special section indexes */ -#define SHN_UNDEF 0 -#define SHN_LORESERVE 0xff00 -#define SHN_LOPROC 0xff00 -#define SHN_HIPROC 0xff1f -#define SHN_ABS 0xfff1 -#define SHN_COMMON 0xfff2 -#define SHN_HIRESERVE 0xffff - -typedef struct elf32_shdr { - Elf32_Word sh_name; - Elf32_Word sh_type; - Elf32_Word sh_flags; - Elf32_Addr sh_addr; - Elf32_Off sh_offset; - Elf32_Word sh_size; - Elf32_Word sh_link; - Elf32_Word sh_info; - Elf32_Word sh_addralign; - Elf32_Word sh_entsize; -} Elf32_Shdr; - -typedef struct elf64_shdr { - Elf64_Word sh_name; /* Section name, index in string tbl */ - Elf64_Word sh_type; /* Type of section */ - Elf64_Xword sh_flags; /* Miscellaneous section attributes */ - Elf64_Addr sh_addr; /* Section virtual addr at execution */ - Elf64_Off sh_offset; /* Section file offset */ - Elf64_Xword sh_size; /* Size of section in bytes */ - Elf64_Word sh_link; /* Index of another section */ - Elf64_Word sh_info; /* Additional section information */ - Elf64_Xword sh_addralign; /* Section alignment */ - Elf64_Xword sh_entsize; /* Entry size if section holds table */ -} Elf64_Shdr; - -#define EI_MAG0 0 /* e_ident[] indexes */ -#define EI_MAG1 1 -#define EI_MAG2 2 -#define EI_MAG3 3 -#define EI_CLASS 4 -#define EI_DATA 5 -#define EI_VERSION 6 -#define EI_OSABI 7 -#define EI_PAD 8 - -#define ELFMAG0 0x7f /* EI_MAG */ -#define ELFMAG1 'E' -#define ELFMAG2 'L' -#define ELFMAG3 'F' -#define ELFMAG "\177ELF" -#define SELFMAG 4 - -#define ELFCLASSNONE 0 /* EI_CLASS */ -#define ELFCLASS32 1 -#define ELFCLASS64 2 -#define ELFCLASSNUM 3 - -#define ELFDATANONE 0 /* e_ident[EI_DATA] */ -#define ELFDATA2LSB 1 -#define ELFDATA2MSB 2 - -#define EV_NONE 0 /* e_version, EI_VERSION */ -#define EV_CURRENT 1 -#define EV_NUM 2 - -#define ELFOSABI_NONE 0 -#define ELFOSABI_LINUX 3 - -#ifndef ELF_OSABI -#define ELF_OSABI ELFOSABI_NONE -#endif - -/* - * Notes used in ET_CORE. Architectures export some of the arch register sets - * using the corresponding note types via the PTRACE_GETREGSET and - * PTRACE_SETREGSET requests. - */ -#define NT_PRSTATUS 1 -#define NT_PRFPREG 2 -#define NT_PRPSINFO 3 -#define NT_TASKSTRUCT 4 -#define NT_AUXV 6 -/* - * Note to userspace developers: size of NT_SIGINFO note may increase - * in the future to accomodate more fields, don't assume it is fixed! - */ -#define NT_SIGINFO 0x53494749 -#define NT_FILE 0x46494c45 -#define NT_PRXFPREG 0x46e62b7f /* copied from gdb5.1/include/elf/common.h */ -#define NT_PPC_VMX 0x100 /* PowerPC Altivec/VMX registers */ -#define NT_PPC_SPE 0x101 /* PowerPC SPE/EVR registers */ -#define NT_PPC_VSX 0x102 /* PowerPC VSX registers */ -#define NT_386_TLS 0x200 /* i386 TLS slots (struct user_desc) */ -#define NT_386_IOPERM 0x201 /* x86 io permission bitmap (1=deny) */ -#define NT_X86_XSTATE 0x202 /* x86 extended state using xsave */ -#define NT_S390_HIGH_GPRS 0x300 /* s390 upper register halves */ -#define NT_S390_TIMER 0x301 /* s390 timer register */ -#define NT_S390_TODCMP 0x302 /* s390 TOD clock comparator register */ -#define NT_S390_TODPREG 0x303 /* s390 TOD programmable register */ -#define NT_S390_CTRS 0x304 /* s390 control registers */ -#define NT_S390_PREFIX 0x305 /* s390 prefix register */ -#define NT_S390_LAST_BREAK 0x306 /* s390 breaking event address */ -#define NT_S390_SYSTEM_CALL 0x307 /* s390 system call restart data */ -#define NT_S390_TDB 0x308 /* s390 transaction diagnostic block */ -#define NT_ARM_VFP 0x400 /* ARM VFP/NEON registers */ -#define NT_ARM_TLS 0x401 /* ARM TLS register */ -#define NT_ARM_HW_BREAK 0x402 /* ARM hardware breakpoint registers */ -#define NT_ARM_HW_WATCH 0x403 /* ARM hardware watchpoint registers */ - - -/* Note header in a PT_NOTE section */ -typedef struct elf32_note { - Elf32_Word n_namesz; /* Name size */ - Elf32_Word n_descsz; /* Content size */ - Elf32_Word n_type; /* Content type */ -} Elf32_Nhdr; - -/* Note header in a PT_NOTE section */ -typedef struct elf64_note { - Elf64_Word n_namesz; /* Name size */ - Elf64_Word n_descsz; /* Content size */ - Elf64_Word n_type; /* Content type */ -} Elf64_Nhdr; +#include <uapi/linux/elf.h> -#ifdef __KERNEL__ #ifndef elf_read_implies_exec /* Executables for which elf_read_implies_exec() returns TRUE will have the READ_IMPLIES_EXEC personality flag set automatically. @@ -455,5 +44,4 @@ static inline int elf_coredump_extra_notes_write(struct file *file, extern int elf_coredump_extra_notes_size(void); extern int elf_coredump_extra_notes_write(struct file *file, loff_t *foffset); #endif -#endif /* __KERNEL__ */ #endif /* _LINUX_ELF_H */ diff --git a/include/linux/elfcore.h b/include/linux/elfcore.h index 0698c79fbcb2..cdd3d13efce7 100644 --- a/include/linux/elfcore.h +++ b/include/linux/elfcore.h @@ -1,109 +1,11 @@ #ifndef _LINUX_ELFCORE_H #define _LINUX_ELFCORE_H -#include <linux/types.h> -#include <linux/signal.h> -#include <linux/time.h> -#ifdef __KERNEL__ #include <linux/user.h> #include <linux/bug.h> -#endif -#include <linux/ptrace.h> -#include <linux/elf.h> -#include <linux/fs.h> - -struct elf_siginfo -{ - int si_signo; /* signal number */ - int si_code; /* extra code */ - int si_errno; /* errno */ -}; - -#ifdef __KERNEL__ #include <asm/elf.h> -#endif +#include <uapi/linux/elfcore.h> -#ifndef __KERNEL__ -typedef elf_greg_t greg_t; -typedef elf_gregset_t gregset_t; -typedef elf_fpregset_t fpregset_t; -typedef elf_fpxregset_t fpxregset_t; -#define NGREG ELF_NGREG -#endif - -/* - * Definitions to generate Intel SVR4-like core files. - * These mostly have the same names as the SVR4 types with "elf_" - * tacked on the front to prevent clashes with linux definitions, - * and the typedef forms have been avoided. This is mostly like - * the SVR4 structure, but more Linuxy, with things that Linux does - * not support and which gdb doesn't really use excluded. - * Fields present but not used are marked with "XXX". - */ -struct elf_prstatus -{ -#if 0 - long pr_flags; /* XXX Process flags */ - short pr_why; /* XXX Reason for process halt */ - short pr_what; /* XXX More detailed reason */ -#endif - struct elf_siginfo pr_info; /* Info associated with signal */ - short pr_cursig; /* Current signal */ - unsigned long pr_sigpend; /* Set of pending signals */ - unsigned long pr_sighold; /* Set of held signals */ -#if 0 - struct sigaltstack pr_altstack; /* Alternate stack info */ - struct sigaction pr_action; /* Signal action for current sig */ -#endif - pid_t pr_pid; - pid_t pr_ppid; - pid_t pr_pgrp; - pid_t pr_sid; - struct timeval pr_utime; /* User time */ - struct timeval pr_stime; /* System time */ - struct timeval pr_cutime; /* Cumulative user time */ - struct timeval pr_cstime; /* Cumulative system time */ -#if 0 - long pr_instr; /* Current instruction */ -#endif - elf_gregset_t pr_reg; /* GP registers */ -#ifdef CONFIG_BINFMT_ELF_FDPIC - /* When using FDPIC, the loadmap addresses need to be communicated - * to GDB in order for GDB to do the necessary relocations. The - * fields (below) used to communicate this information are placed - * immediately after ``pr_reg'', so that the loadmap addresses may - * be viewed as part of the register set if so desired. - */ - unsigned long pr_exec_fdpic_loadmap; - unsigned long pr_interp_fdpic_loadmap; -#endif - int pr_fpvalid; /* True if math co-processor being used. */ -}; - -#define ELF_PRARGSZ (80) /* Number of chars for args */ - -struct elf_prpsinfo -{ - char pr_state; /* numeric process state */ - char pr_sname; /* char for pr_state */ - char pr_zomb; /* zombie */ - char pr_nice; /* nice val */ - unsigned long pr_flag; /* flags */ - __kernel_uid_t pr_uid; - __kernel_gid_t pr_gid; - pid_t pr_pid, pr_ppid, pr_pgrp, pr_sid; - /* Lots missing */ - char pr_fname[16]; /* filename of executable */ - char pr_psargs[ELF_PRARGSZ]; /* initial part of arg list */ -}; - -#ifndef __KERNEL__ -typedef struct elf_prstatus prstatus_t; -typedef struct elf_prpsinfo prpsinfo_t; -#define PRARGSZ ELF_PRARGSZ -#endif - -#ifdef __KERNEL__ static inline void elf_core_copy_regs(elf_gregset_t *elfregs, struct pt_regs *regs) { #ifdef ELF_CORE_COPY_REGS @@ -167,6 +69,4 @@ extern int elf_core_write_extra_data(struct file *file, size_t *size, unsigned long limit); extern size_t elf_core_extra_data_size(void); -#endif /* __KERNEL__ */ - #endif /* _LINUX_ELFCORE_H */ diff --git a/include/linux/errno.h b/include/linux/errno.h index e0de516374da..f6bf082d4d4f 100644 --- a/include/linux/errno.h +++ b/include/linux/errno.h @@ -1,9 +1,8 @@ #ifndef _LINUX_ERRNO_H #define _LINUX_ERRNO_H -#include <asm/errno.h> +#include <uapi/linux/errno.h> -#ifdef __KERNEL__ /* * These should never be seen by user programs. To return one of ERESTART* @@ -32,5 +31,3 @@ #define EIOCBRETRY 530 /* iocb queued, will trigger a retry */ #endif - -#endif diff --git a/include/linux/errqueue.h b/include/linux/errqueue.h index fd0628be45ce..9ca23fcfb5d7 100644 --- a/include/linux/errqueue.h +++ b/include/linux/errqueue.h @@ -1,33 +1,12 @@ #ifndef _LINUX_ERRQUEUE_H #define _LINUX_ERRQUEUE_H 1 -#include <linux/types.h> - -struct sock_extended_err { - __u32 ee_errno; - __u8 ee_origin; - __u8 ee_type; - __u8 ee_code; - __u8 ee_pad; - __u32 ee_info; - __u32 ee_data; -}; - -#define SO_EE_ORIGIN_NONE 0 -#define SO_EE_ORIGIN_LOCAL 1 -#define SO_EE_ORIGIN_ICMP 2 -#define SO_EE_ORIGIN_ICMP6 3 -#define SO_EE_ORIGIN_TXSTATUS 4 -#define SO_EE_ORIGIN_TIMESTAMPING SO_EE_ORIGIN_TXSTATUS - -#define SO_EE_OFFENDER(ee) ((struct sockaddr*)((ee)+1)) - -#ifdef __KERNEL__ #include <net/ip.h> #if IS_ENABLED(CONFIG_IPV6) #include <linux/ipv6.h> #endif +#include <uapi/linux/errqueue.h> #define SKB_EXT_ERR(skb) ((struct sock_exterr_skb *) ((skb)->cb)) @@ -44,5 +23,3 @@ struct sock_exterr_skb { }; #endif - -#endif diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h index fcb4f8e60c1c..c8e3e7e39c6b 100644 --- a/include/linux/ethtool.h +++ b/include/linux/ethtool.h @@ -9,596 +9,12 @@ * scott.feldman@intel.com) * Portions Copyright (C) Sun Microsystems 2008 */ - #ifndef _LINUX_ETHTOOL_H #define _LINUX_ETHTOOL_H -#ifdef __KERNEL__ #include <linux/compat.h> -#endif -#include <linux/types.h> -#include <linux/if_ether.h> - -/* This should work for both 32 and 64 bit userland. */ -struct ethtool_cmd { - __u32 cmd; - __u32 supported; /* Features this interface supports */ - __u32 advertising; /* Features this interface advertises */ - __u16 speed; /* The forced speed (lower bits) in - * Mbps. Please use - * ethtool_cmd_speed()/_set() to - * access it */ - __u8 duplex; /* Duplex, half or full */ - __u8 port; /* Which connector port */ - __u8 phy_address; /* MDIO PHY address (PRTAD for clause 45). - * May be read-only or read-write - * depending on the driver. - */ - __u8 transceiver; /* Which transceiver to use */ - __u8 autoneg; /* Enable or disable autonegotiation */ - __u8 mdio_support; /* MDIO protocols supported. Read-only. - * Not set by all drivers. - */ - __u32 maxtxpkt; /* Tx pkts before generating tx int */ - __u32 maxrxpkt; /* Rx pkts before generating rx int */ - __u16 speed_hi; /* The forced speed (upper - * bits) in Mbps. Please use - * ethtool_cmd_speed()/_set() to - * access it */ - __u8 eth_tp_mdix; /* twisted pair MDI-X status */ - __u8 eth_tp_mdix_ctrl; /* twisted pair MDI-X control, when set, - * link should be renegotiated if necessary - */ - __u32 lp_advertising; /* Features the link partner advertises */ - __u32 reserved[2]; -}; - -static inline void ethtool_cmd_speed_set(struct ethtool_cmd *ep, - __u32 speed) -{ - - ep->speed = (__u16)speed; - ep->speed_hi = (__u16)(speed >> 16); -} - -static inline __u32 ethtool_cmd_speed(const struct ethtool_cmd *ep) -{ - return (ep->speed_hi << 16) | ep->speed; -} - -/* Device supports clause 22 register access to PHY or peripherals - * using the interface defined in <linux/mii.h>. This should not be - * set if there are known to be no such peripherals present or if - * the driver only emulates clause 22 registers for compatibility. - */ -#define ETH_MDIO_SUPPORTS_C22 1 - -/* Device supports clause 45 register access to PHY or peripherals - * using the interface defined in <linux/mii.h> and <linux/mdio.h>. - * This should not be set if there are known to be no such peripherals - * present. - */ -#define ETH_MDIO_SUPPORTS_C45 2 - -#define ETHTOOL_FWVERS_LEN 32 -#define ETHTOOL_BUSINFO_LEN 32 -/* these strings are set to whatever the driver author decides... */ -struct ethtool_drvinfo { - __u32 cmd; - char driver[32]; /* driver short name, "tulip", "eepro100" */ - char version[32]; /* driver version string */ - char fw_version[ETHTOOL_FWVERS_LEN]; /* firmware version string */ - char bus_info[ETHTOOL_BUSINFO_LEN]; /* Bus info for this IF. */ - /* For PCI devices, use pci_name(pci_dev). */ - char reserved1[32]; - char reserved2[12]; - /* - * Some struct members below are filled in - * using ops->get_sset_count(). Obtaining - * this info from ethtool_drvinfo is now - * deprecated; Use ETHTOOL_GSSET_INFO - * instead. - */ - __u32 n_priv_flags; /* number of flags valid in ETHTOOL_GPFLAGS */ - __u32 n_stats; /* number of u64's from ETHTOOL_GSTATS */ - __u32 testinfo_len; - __u32 eedump_len; /* Size of data from ETHTOOL_GEEPROM (bytes) */ - __u32 regdump_len; /* Size of data from ETHTOOL_GREGS (bytes) */ -}; - -#define SOPASS_MAX 6 -/* wake-on-lan settings */ -struct ethtool_wolinfo { - __u32 cmd; - __u32 supported; - __u32 wolopts; - __u8 sopass[SOPASS_MAX]; /* SecureOn(tm) password */ -}; - -/* for passing single values */ -struct ethtool_value { - __u32 cmd; - __u32 data; -}; - -/* for passing big chunks of data */ -struct ethtool_regs { - __u32 cmd; - __u32 version; /* driver-specific, indicates different chips/revs */ - __u32 len; /* bytes */ - __u8 data[0]; -}; - -/* for passing EEPROM chunks */ -struct ethtool_eeprom { - __u32 cmd; - __u32 magic; - __u32 offset; /* in bytes */ - __u32 len; /* in bytes */ - __u8 data[0]; -}; - -/** - * struct ethtool_eee - Energy Efficient Ethernet information - * @cmd: ETHTOOL_{G,S}EEE - * @supported: Mask of %SUPPORTED_* flags for the speed/duplex combinations - * for which there is EEE support. - * @advertised: Mask of %ADVERTISED_* flags for the speed/duplex combinations - * advertised as eee capable. - * @lp_advertised: Mask of %ADVERTISED_* flags for the speed/duplex - * combinations advertised by the link partner as eee capable. - * @eee_active: Result of the eee auto negotiation. - * @eee_enabled: EEE configured mode (enabled/disabled). - * @tx_lpi_enabled: Whether the interface should assert its tx lpi, given - * that eee was negotiated. - * @tx_lpi_timer: Time in microseconds the interface delays prior to asserting - * its tx lpi (after reaching 'idle' state). Effective only when eee - * was negotiated and tx_lpi_enabled was set. - */ -struct ethtool_eee { - __u32 cmd; - __u32 supported; - __u32 advertised; - __u32 lp_advertised; - __u32 eee_active; - __u32 eee_enabled; - __u32 tx_lpi_enabled; - __u32 tx_lpi_timer; - __u32 reserved[2]; -}; - -/** - * struct ethtool_modinfo - plugin module eeprom information - * @cmd: %ETHTOOL_GMODULEINFO - * @type: Standard the module information conforms to %ETH_MODULE_SFF_xxxx - * @eeprom_len: Length of the eeprom - * - * This structure is used to return the information to - * properly size memory for a subsequent call to %ETHTOOL_GMODULEEEPROM. - * The type code indicates the eeprom data format - */ -struct ethtool_modinfo { - __u32 cmd; - __u32 type; - __u32 eeprom_len; - __u32 reserved[8]; -}; - -/** - * struct ethtool_coalesce - coalescing parameters for IRQs and stats updates - * @cmd: ETHTOOL_{G,S}COALESCE - * @rx_coalesce_usecs: How many usecs to delay an RX interrupt after - * a packet arrives. - * @rx_max_coalesced_frames: Maximum number of packets to receive - * before an RX interrupt. - * @rx_coalesce_usecs_irq: Same as @rx_coalesce_usecs, except that - * this value applies while an IRQ is being serviced by the host. - * @rx_max_coalesced_frames_irq: Same as @rx_max_coalesced_frames, - * except that this value applies while an IRQ is being serviced - * by the host. - * @tx_coalesce_usecs: How many usecs to delay a TX interrupt after - * a packet is sent. - * @tx_max_coalesced_frames: Maximum number of packets to be sent - * before a TX interrupt. - * @tx_coalesce_usecs_irq: Same as @tx_coalesce_usecs, except that - * this value applies while an IRQ is being serviced by the host. - * @tx_max_coalesced_frames_irq: Same as @tx_max_coalesced_frames, - * except that this value applies while an IRQ is being serviced - * by the host. - * @stats_block_coalesce_usecs: How many usecs to delay in-memory - * statistics block updates. Some drivers do not have an - * in-memory statistic block, and in such cases this value is - * ignored. This value must not be zero. - * @use_adaptive_rx_coalesce: Enable adaptive RX coalescing. - * @use_adaptive_tx_coalesce: Enable adaptive TX coalescing. - * @pkt_rate_low: Threshold for low packet rate (packets per second). - * @rx_coalesce_usecs_low: How many usecs to delay an RX interrupt after - * a packet arrives, when the packet rate is below @pkt_rate_low. - * @rx_max_coalesced_frames_low: Maximum number of packets to be received - * before an RX interrupt, when the packet rate is below @pkt_rate_low. - * @tx_coalesce_usecs_low: How many usecs to delay a TX interrupt after - * a packet is sent, when the packet rate is below @pkt_rate_low. - * @tx_max_coalesced_frames_low: Maximum nuumber of packets to be sent before - * a TX interrupt, when the packet rate is below @pkt_rate_low. - * @pkt_rate_high: Threshold for high packet rate (packets per second). - * @rx_coalesce_usecs_high: How many usecs to delay an RX interrupt after - * a packet arrives, when the packet rate is above @pkt_rate_high. - * @rx_max_coalesced_frames_high: Maximum number of packets to be received - * before an RX interrupt, when the packet rate is above @pkt_rate_high. - * @tx_coalesce_usecs_high: How many usecs to delay a TX interrupt after - * a packet is sent, when the packet rate is above @pkt_rate_high. - * @tx_max_coalesced_frames_high: Maximum number of packets to be sent before - * a TX interrupt, when the packet rate is above @pkt_rate_high. - * @rate_sample_interval: How often to do adaptive coalescing packet rate - * sampling, measured in seconds. Must not be zero. - * - * Each pair of (usecs, max_frames) fields specifies this exit - * condition for interrupt coalescing: - * (usecs > 0 && time_since_first_completion >= usecs) || - * (max_frames > 0 && completed_frames >= max_frames) - * It is illegal to set both usecs and max_frames to zero as this - * would cause interrupts to never be generated. To disable - * coalescing, set usecs = 0 and max_frames = 1. - * - * Some implementations ignore the value of max_frames and use the - * condition: - * time_since_first_completion >= usecs - * This is deprecated. Drivers for hardware that does not support - * counting completions should validate that max_frames == !rx_usecs. - * - * Adaptive RX/TX coalescing is an algorithm implemented by some - * drivers to improve latency under low packet rates and improve - * throughput under high packet rates. Some drivers only implement - * one of RX or TX adaptive coalescing. Anything not implemented by - * the driver causes these values to be silently ignored. - * - * When the packet rate is below @pkt_rate_high but above - * @pkt_rate_low (both measured in packets per second) the - * normal {rx,tx}_* coalescing parameters are used. - */ -struct ethtool_coalesce { - __u32 cmd; - __u32 rx_coalesce_usecs; - __u32 rx_max_coalesced_frames; - __u32 rx_coalesce_usecs_irq; - __u32 rx_max_coalesced_frames_irq; - __u32 tx_coalesce_usecs; - __u32 tx_max_coalesced_frames; - __u32 tx_coalesce_usecs_irq; - __u32 tx_max_coalesced_frames_irq; - __u32 stats_block_coalesce_usecs; - __u32 use_adaptive_rx_coalesce; - __u32 use_adaptive_tx_coalesce; - __u32 pkt_rate_low; - __u32 rx_coalesce_usecs_low; - __u32 rx_max_coalesced_frames_low; - __u32 tx_coalesce_usecs_low; - __u32 tx_max_coalesced_frames_low; - __u32 pkt_rate_high; - __u32 rx_coalesce_usecs_high; - __u32 rx_max_coalesced_frames_high; - __u32 tx_coalesce_usecs_high; - __u32 tx_max_coalesced_frames_high; - __u32 rate_sample_interval; -}; - -/* for configuring RX/TX ring parameters */ -struct ethtool_ringparam { - __u32 cmd; /* ETHTOOL_{G,S}RINGPARAM */ - - /* Read only attributes. These indicate the maximum number - * of pending RX/TX ring entries the driver will allow the - * user to set. - */ - __u32 rx_max_pending; - __u32 rx_mini_max_pending; - __u32 rx_jumbo_max_pending; - __u32 tx_max_pending; - - /* Values changeable by the user. The valid values are - * in the range 1 to the "*_max_pending" counterpart above. - */ - __u32 rx_pending; - __u32 rx_mini_pending; - __u32 rx_jumbo_pending; - __u32 tx_pending; -}; - -/** - * struct ethtool_channels - configuring number of network channel - * @cmd: ETHTOOL_{G,S}CHANNELS - * @max_rx: Read only. Maximum number of receive channel the driver support. - * @max_tx: Read only. Maximum number of transmit channel the driver support. - * @max_other: Read only. Maximum number of other channel the driver support. - * @max_combined: Read only. Maximum number of combined channel the driver - * support. Set of queues RX, TX or other. - * @rx_count: Valid values are in the range 1 to the max_rx. - * @tx_count: Valid values are in the range 1 to the max_tx. - * @other_count: Valid values are in the range 1 to the max_other. - * @combined_count: Valid values are in the range 1 to the max_combined. - * - * This can be used to configure RX, TX and other channels. - */ - -struct ethtool_channels { - __u32 cmd; - __u32 max_rx; - __u32 max_tx; - __u32 max_other; - __u32 max_combined; - __u32 rx_count; - __u32 tx_count; - __u32 other_count; - __u32 combined_count; -}; - -/* for configuring link flow control parameters */ -struct ethtool_pauseparam { - __u32 cmd; /* ETHTOOL_{G,S}PAUSEPARAM */ - - /* If the link is being auto-negotiated (via ethtool_cmd.autoneg - * being true) the user may set 'autoneg' here non-zero to have the - * pause parameters be auto-negotiated too. In such a case, the - * {rx,tx}_pause values below determine what capabilities are - * advertised. - * - * If 'autoneg' is zero or the link is not being auto-negotiated, - * then {rx,tx}_pause force the driver to use/not-use pause - * flow control. - */ - __u32 autoneg; - __u32 rx_pause; - __u32 tx_pause; -}; - -#define ETH_GSTRING_LEN 32 -enum ethtool_stringset { - ETH_SS_TEST = 0, - ETH_SS_STATS, - ETH_SS_PRIV_FLAGS, - ETH_SS_NTUPLE_FILTERS, /* Do not use, GRXNTUPLE is now deprecated */ - ETH_SS_FEATURES, -}; - -/* for passing string sets for data tagging */ -struct ethtool_gstrings { - __u32 cmd; /* ETHTOOL_GSTRINGS */ - __u32 string_set; /* string set id e.c. ETH_SS_TEST, etc*/ - __u32 len; /* number of strings in the string set */ - __u8 data[0]; -}; - -struct ethtool_sset_info { - __u32 cmd; /* ETHTOOL_GSSET_INFO */ - __u32 reserved; - __u64 sset_mask; /* input: each bit selects an sset to query */ - /* output: each bit a returned sset */ - __u32 data[0]; /* ETH_SS_xxx count, in order, based on bits - in sset_mask. One bit implies one - __u32, two bits implies two - __u32's, etc. */ -}; - -/** - * enum ethtool_test_flags - flags definition of ethtool_test - * @ETH_TEST_FL_OFFLINE: if set perform online and offline tests, otherwise - * only online tests. - * @ETH_TEST_FL_FAILED: Driver set this flag if test fails. - * @ETH_TEST_FL_EXTERNAL_LB: Application request to perform external loopback - * test. - * @ETH_TEST_FL_EXTERNAL_LB_DONE: Driver performed the external loopback test - */ - -enum ethtool_test_flags { - ETH_TEST_FL_OFFLINE = (1 << 0), - ETH_TEST_FL_FAILED = (1 << 1), - ETH_TEST_FL_EXTERNAL_LB = (1 << 2), - ETH_TEST_FL_EXTERNAL_LB_DONE = (1 << 3), -}; - -/* for requesting NIC test and getting results*/ -struct ethtool_test { - __u32 cmd; /* ETHTOOL_TEST */ - __u32 flags; /* ETH_TEST_FL_xxx */ - __u32 reserved; - __u32 len; /* result length, in number of u64 elements */ - __u64 data[0]; -}; - -/* for dumping NIC-specific statistics */ -struct ethtool_stats { - __u32 cmd; /* ETHTOOL_GSTATS */ - __u32 n_stats; /* number of u64's being returned */ - __u64 data[0]; -}; - -struct ethtool_perm_addr { - __u32 cmd; /* ETHTOOL_GPERMADDR */ - __u32 size; - __u8 data[0]; -}; - -/* boolean flags controlling per-interface behavior characteristics. - * When reading, the flag indicates whether or not a certain behavior - * is enabled/present. When writing, the flag indicates whether - * or not the driver should turn on (set) or off (clear) a behavior. - * - * Some behaviors may read-only (unconditionally absent or present). - * If such is the case, return EINVAL in the set-flags operation if the - * flag differs from the read-only value. - */ -enum ethtool_flags { - ETH_FLAG_TXVLAN = (1 << 7), /* TX VLAN offload enabled */ - ETH_FLAG_RXVLAN = (1 << 8), /* RX VLAN offload enabled */ - ETH_FLAG_LRO = (1 << 15), /* LRO is enabled */ - ETH_FLAG_NTUPLE = (1 << 27), /* N-tuple filters enabled */ - ETH_FLAG_RXHASH = (1 << 28), -}; +#include <uapi/linux/ethtool.h> -/* The following structures are for supporting RX network flow - * classification and RX n-tuple configuration. Note, all multibyte - * fields, e.g., ip4src, ip4dst, psrc, pdst, spi, etc. are expected to - * be in network byte order. - */ - -/** - * struct ethtool_tcpip4_spec - flow specification for TCP/IPv4 etc. - * @ip4src: Source host - * @ip4dst: Destination host - * @psrc: Source port - * @pdst: Destination port - * @tos: Type-of-service - * - * This can be used to specify a TCP/IPv4, UDP/IPv4 or SCTP/IPv4 flow. - */ -struct ethtool_tcpip4_spec { - __be32 ip4src; - __be32 ip4dst; - __be16 psrc; - __be16 pdst; - __u8 tos; -}; - -/** - * struct ethtool_ah_espip4_spec - flow specification for IPsec/IPv4 - * @ip4src: Source host - * @ip4dst: Destination host - * @spi: Security parameters index - * @tos: Type-of-service - * - * This can be used to specify an IPsec transport or tunnel over IPv4. - */ -struct ethtool_ah_espip4_spec { - __be32 ip4src; - __be32 ip4dst; - __be32 spi; - __u8 tos; -}; - -#define ETH_RX_NFC_IP4 1 - -/** - * struct ethtool_usrip4_spec - general flow specification for IPv4 - * @ip4src: Source host - * @ip4dst: Destination host - * @l4_4_bytes: First 4 bytes of transport (layer 4) header - * @tos: Type-of-service - * @ip_ver: Value must be %ETH_RX_NFC_IP4; mask must be 0 - * @proto: Transport protocol number; mask must be 0 - */ -struct ethtool_usrip4_spec { - __be32 ip4src; - __be32 ip4dst; - __be32 l4_4_bytes; - __u8 tos; - __u8 ip_ver; - __u8 proto; -}; - -union ethtool_flow_union { - struct ethtool_tcpip4_spec tcp_ip4_spec; - struct ethtool_tcpip4_spec udp_ip4_spec; - struct ethtool_tcpip4_spec sctp_ip4_spec; - struct ethtool_ah_espip4_spec ah_ip4_spec; - struct ethtool_ah_espip4_spec esp_ip4_spec; - struct ethtool_usrip4_spec usr_ip4_spec; - struct ethhdr ether_spec; - __u8 hdata[60]; -}; - -struct ethtool_flow_ext { - __be16 vlan_etype; - __be16 vlan_tci; - __be32 data[2]; -}; - -/** - * struct ethtool_rx_flow_spec - classification rule for RX flows - * @flow_type: Type of match to perform, e.g. %TCP_V4_FLOW - * @h_u: Flow fields to match (dependent on @flow_type) - * @h_ext: Additional fields to match - * @m_u: Masks for flow field bits to be matched - * @m_ext: Masks for additional field bits to be matched - * Note, all additional fields must be ignored unless @flow_type - * includes the %FLOW_EXT flag. - * @ring_cookie: RX ring/queue index to deliver to, or %RX_CLS_FLOW_DISC - * if packets should be discarded - * @location: Location of rule in the table. Locations must be - * numbered such that a flow matching multiple rules will be - * classified according to the first (lowest numbered) rule. - */ -struct ethtool_rx_flow_spec { - __u32 flow_type; - union ethtool_flow_union h_u; - struct ethtool_flow_ext h_ext; - union ethtool_flow_union m_u; - struct ethtool_flow_ext m_ext; - __u64 ring_cookie; - __u32 location; -}; - -/** - * struct ethtool_rxnfc - command to get or set RX flow classification rules - * @cmd: Specific command number - %ETHTOOL_GRXFH, %ETHTOOL_SRXFH, - * %ETHTOOL_GRXRINGS, %ETHTOOL_GRXCLSRLCNT, %ETHTOOL_GRXCLSRULE, - * %ETHTOOL_GRXCLSRLALL, %ETHTOOL_SRXCLSRLDEL or %ETHTOOL_SRXCLSRLINS - * @flow_type: Type of flow to be affected, e.g. %TCP_V4_FLOW - * @data: Command-dependent value - * @fs: Flow classification rule - * @rule_cnt: Number of rules to be affected - * @rule_locs: Array of used rule locations - * - * For %ETHTOOL_GRXFH and %ETHTOOL_SRXFH, @data is a bitmask indicating - * the fields included in the flow hash, e.g. %RXH_IP_SRC. The following - * structure fields must not be used. - * - * For %ETHTOOL_GRXRINGS, @data is set to the number of RX rings/queues - * on return. - * - * For %ETHTOOL_GRXCLSRLCNT, @rule_cnt is set to the number of defined - * rules on return. If @data is non-zero on return then it is the - * size of the rule table, plus the flag %RX_CLS_LOC_SPECIAL if the - * driver supports any special location values. If that flag is not - * set in @data then special location values should not be used. - * - * For %ETHTOOL_GRXCLSRULE, @fs.@location specifies the location of an - * existing rule on entry and @fs contains the rule on return. - * - * For %ETHTOOL_GRXCLSRLALL, @rule_cnt specifies the array size of the - * user buffer for @rule_locs on entry. On return, @data is the size - * of the rule table, @rule_cnt is the number of defined rules, and - * @rule_locs contains the locations of the defined rules. Drivers - * must use the second parameter to get_rxnfc() instead of @rule_locs. - * - * For %ETHTOOL_SRXCLSRLINS, @fs specifies the rule to add or update. - * @fs.@location either specifies the location to use or is a special - * location value with %RX_CLS_LOC_SPECIAL flag set. On return, - * @fs.@location is the actual rule location. - * - * For %ETHTOOL_SRXCLSRLDEL, @fs.@location specifies the location of an - * existing rule on entry. - * - * A driver supporting the special location values for - * %ETHTOOL_SRXCLSRLINS may add the rule at any suitable unused - * location, and may remove a rule at a later location (lower - * priority) that matches exactly the same set of flows. The special - * values are: %RX_CLS_LOC_ANY, selecting any location; - * %RX_CLS_LOC_FIRST, selecting the first suitable location (maximum - * priority); and %RX_CLS_LOC_LAST, selecting the last suitable - * location (minimum priority). Additional special values may be - * defined in future and drivers must return -%EINVAL for any - * unrecognised value. - */ -struct ethtool_rxnfc { - __u32 cmd; - __u32 flow_type; - __u64 data; - struct ethtool_rx_flow_spec fs; - __u32 rule_cnt; - __u32 rule_locs[0]; -}; - -#ifdef __KERNEL__ #ifdef CONFIG_COMPAT struct compat_ethtool_rx_flow_spec { @@ -621,223 +37,6 @@ struct compat_ethtool_rxnfc { }; #endif /* CONFIG_COMPAT */ -#endif /* __KERNEL__ */ - -/** - * struct ethtool_rxfh_indir - command to get or set RX flow hash indirection - * @cmd: Specific command number - %ETHTOOL_GRXFHINDIR or %ETHTOOL_SRXFHINDIR - * @size: On entry, the array size of the user buffer, which may be zero. - * On return from %ETHTOOL_GRXFHINDIR, the array size of the hardware - * indirection table. - * @ring_index: RX ring/queue index for each hash value - * - * For %ETHTOOL_GRXFHINDIR, a @size of zero means that only the size - * should be returned. For %ETHTOOL_SRXFHINDIR, a @size of zero means - * the table should be reset to default values. This last feature - * is not supported by the original implementations. - */ -struct ethtool_rxfh_indir { - __u32 cmd; - __u32 size; - __u32 ring_index[0]; -}; - -/** - * struct ethtool_rx_ntuple_flow_spec - specification for RX flow filter - * @flow_type: Type of match to perform, e.g. %TCP_V4_FLOW - * @h_u: Flow field values to match (dependent on @flow_type) - * @m_u: Masks for flow field value bits to be ignored - * @vlan_tag: VLAN tag to match - * @vlan_tag_mask: Mask for VLAN tag bits to be ignored - * @data: Driver-dependent data to match - * @data_mask: Mask for driver-dependent data bits to be ignored - * @action: RX ring/queue index to deliver to (non-negative) or other action - * (negative, e.g. %ETHTOOL_RXNTUPLE_ACTION_DROP) - * - * For flow types %TCP_V4_FLOW, %UDP_V4_FLOW and %SCTP_V4_FLOW, where - * a field value and mask are both zero this is treated as if all mask - * bits are set i.e. the field is ignored. - */ -struct ethtool_rx_ntuple_flow_spec { - __u32 flow_type; - union { - struct ethtool_tcpip4_spec tcp_ip4_spec; - struct ethtool_tcpip4_spec udp_ip4_spec; - struct ethtool_tcpip4_spec sctp_ip4_spec; - struct ethtool_ah_espip4_spec ah_ip4_spec; - struct ethtool_ah_espip4_spec esp_ip4_spec; - struct ethtool_usrip4_spec usr_ip4_spec; - struct ethhdr ether_spec; - __u8 hdata[72]; - } h_u, m_u; - - __u16 vlan_tag; - __u16 vlan_tag_mask; - __u64 data; - __u64 data_mask; - - __s32 action; -#define ETHTOOL_RXNTUPLE_ACTION_DROP (-1) /* drop packet */ -#define ETHTOOL_RXNTUPLE_ACTION_CLEAR (-2) /* clear filter */ -}; - -/** - * struct ethtool_rx_ntuple - command to set or clear RX flow filter - * @cmd: Command number - %ETHTOOL_SRXNTUPLE - * @fs: Flow filter specification - */ -struct ethtool_rx_ntuple { - __u32 cmd; - struct ethtool_rx_ntuple_flow_spec fs; -}; - -#define ETHTOOL_FLASH_MAX_FILENAME 128 -enum ethtool_flash_op_type { - ETHTOOL_FLASH_ALL_REGIONS = 0, -}; - -/* for passing firmware flashing related parameters */ -struct ethtool_flash { - __u32 cmd; - __u32 region; - char data[ETHTOOL_FLASH_MAX_FILENAME]; -}; - -/** - * struct ethtool_dump - used for retrieving, setting device dump - * @cmd: Command number - %ETHTOOL_GET_DUMP_FLAG, %ETHTOOL_GET_DUMP_DATA, or - * %ETHTOOL_SET_DUMP - * @version: FW version of the dump, filled in by driver - * @flag: driver dependent flag for dump setting, filled in by driver during - * get and filled in by ethtool for set operation. - * flag must be initialized by macro ETH_FW_DUMP_DISABLE value when - * firmware dump is disabled. - * @len: length of dump data, used as the length of the user buffer on entry to - * %ETHTOOL_GET_DUMP_DATA and this is returned as dump length by driver - * for %ETHTOOL_GET_DUMP_FLAG command - * @data: data collected for get dump data operation - */ - -#define ETH_FW_DUMP_DISABLE 0 - -struct ethtool_dump { - __u32 cmd; - __u32 version; - __u32 flag; - __u32 len; - __u8 data[0]; -}; - -/* for returning and changing feature sets */ - -/** - * struct ethtool_get_features_block - block with state of 32 features - * @available: mask of changeable features - * @requested: mask of features requested to be enabled if possible - * @active: mask of currently enabled features - * @never_changed: mask of features not changeable for any device - */ -struct ethtool_get_features_block { - __u32 available; - __u32 requested; - __u32 active; - __u32 never_changed; -}; - -/** - * struct ethtool_gfeatures - command to get state of device's features - * @cmd: command number = %ETHTOOL_GFEATURES - * @size: in: number of elements in the features[] array; - * out: number of elements in features[] needed to hold all features - * @features: state of features - */ -struct ethtool_gfeatures { - __u32 cmd; - __u32 size; - struct ethtool_get_features_block features[0]; -}; - -/** - * struct ethtool_set_features_block - block with request for 32 features - * @valid: mask of features to be changed - * @requested: values of features to be changed - */ -struct ethtool_set_features_block { - __u32 valid; - __u32 requested; -}; - -/** - * struct ethtool_sfeatures - command to request change in device's features - * @cmd: command number = %ETHTOOL_SFEATURES - * @size: array size of the features[] array - * @features: feature change masks - */ -struct ethtool_sfeatures { - __u32 cmd; - __u32 size; - struct ethtool_set_features_block features[0]; -}; - -/** - * struct ethtool_ts_info - holds a device's timestamping and PHC association - * @cmd: command number = %ETHTOOL_GET_TS_INFO - * @so_timestamping: bit mask of the sum of the supported SO_TIMESTAMPING flags - * @phc_index: device index of the associated PHC, or -1 if there is none - * @tx_types: bit mask of the supported hwtstamp_tx_types enumeration values - * @rx_filters: bit mask of the supported hwtstamp_rx_filters enumeration values - * - * The bits in the 'tx_types' and 'rx_filters' fields correspond to - * the 'hwtstamp_tx_types' and 'hwtstamp_rx_filters' enumeration values, - * respectively. For example, if the device supports HWTSTAMP_TX_ON, - * then (1 << HWTSTAMP_TX_ON) in 'tx_types' will be set. - */ -struct ethtool_ts_info { - __u32 cmd; - __u32 so_timestamping; - __s32 phc_index; - __u32 tx_types; - __u32 tx_reserved[3]; - __u32 rx_filters; - __u32 rx_reserved[3]; -}; - -/* - * %ETHTOOL_SFEATURES changes features present in features[].valid to the - * values of corresponding bits in features[].requested. Bits in .requested - * not set in .valid or not changeable are ignored. - * - * Returns %EINVAL when .valid contains undefined or never-changeable bits - * or size is not equal to required number of features words (32-bit blocks). - * Returns >= 0 if request was completed; bits set in the value mean: - * %ETHTOOL_F_UNSUPPORTED - there were bits set in .valid that are not - * changeable (not present in %ETHTOOL_GFEATURES' features[].available) - * those bits were ignored. - * %ETHTOOL_F_WISH - some or all changes requested were recorded but the - * resulting state of bits masked by .valid is not equal to .requested. - * Probably there are other device-specific constraints on some features - * in the set. When %ETHTOOL_F_UNSUPPORTED is set, .valid is considered - * here as though ignored bits were cleared. - * %ETHTOOL_F_COMPAT - some or all changes requested were made by calling - * compatibility functions. Requested offload state cannot be properly - * managed by kernel. - * - * Meaning of bits in the masks are obtained by %ETHTOOL_GSSET_INFO (number of - * bits in the arrays - always multiple of 32) and %ETHTOOL_GSTRINGS commands - * for ETH_SS_FEATURES string set. First entry in the table corresponds to least - * significant bit in features[0] fields. Empty strings mark undefined features. - */ -enum ethtool_sfeatures_retval_bits { - ETHTOOL_F_UNSUPPORTED__BIT, - ETHTOOL_F_WISH__BIT, - ETHTOOL_F_COMPAT__BIT, -}; - -#define ETHTOOL_F_UNSUPPORTED (1 << ETHTOOL_F_UNSUPPORTED__BIT) -#define ETHTOOL_F_WISH (1 << ETHTOOL_F_WISH__BIT) -#define ETHTOOL_F_COMPAT (1 << ETHTOOL_F_COMPAT__BIT) - -#ifdef __KERNEL__ #include <linux/rculist.h> @@ -1049,277 +248,4 @@ struct ethtool_ops { }; -#endif /* __KERNEL__ */ - -/* CMDs currently supported */ -#define ETHTOOL_GSET 0x00000001 /* Get settings. */ -#define ETHTOOL_SSET 0x00000002 /* Set settings. */ -#define ETHTOOL_GDRVINFO 0x00000003 /* Get driver info. */ -#define ETHTOOL_GREGS 0x00000004 /* Get NIC registers. */ -#define ETHTOOL_GWOL 0x00000005 /* Get wake-on-lan options. */ -#define ETHTOOL_SWOL 0x00000006 /* Set wake-on-lan options. */ -#define ETHTOOL_GMSGLVL 0x00000007 /* Get driver message level */ -#define ETHTOOL_SMSGLVL 0x00000008 /* Set driver msg level. */ -#define ETHTOOL_NWAY_RST 0x00000009 /* Restart autonegotiation. */ -/* Get link status for host, i.e. whether the interface *and* the - * physical port (if there is one) are up (ethtool_value). */ -#define ETHTOOL_GLINK 0x0000000a -#define ETHTOOL_GEEPROM 0x0000000b /* Get EEPROM data */ -#define ETHTOOL_SEEPROM 0x0000000c /* Set EEPROM data. */ -#define ETHTOOL_GCOALESCE 0x0000000e /* Get coalesce config */ -#define ETHTOOL_SCOALESCE 0x0000000f /* Set coalesce config. */ -#define ETHTOOL_GRINGPARAM 0x00000010 /* Get ring parameters */ -#define ETHTOOL_SRINGPARAM 0x00000011 /* Set ring parameters. */ -#define ETHTOOL_GPAUSEPARAM 0x00000012 /* Get pause parameters */ -#define ETHTOOL_SPAUSEPARAM 0x00000013 /* Set pause parameters. */ -#define ETHTOOL_GRXCSUM 0x00000014 /* Get RX hw csum enable (ethtool_value) */ -#define ETHTOOL_SRXCSUM 0x00000015 /* Set RX hw csum enable (ethtool_value) */ -#define ETHTOOL_GTXCSUM 0x00000016 /* Get TX hw csum enable (ethtool_value) */ -#define ETHTOOL_STXCSUM 0x00000017 /* Set TX hw csum enable (ethtool_value) */ -#define ETHTOOL_GSG 0x00000018 /* Get scatter-gather enable - * (ethtool_value) */ -#define ETHTOOL_SSG 0x00000019 /* Set scatter-gather enable - * (ethtool_value). */ -#define ETHTOOL_TEST 0x0000001a /* execute NIC self-test. */ -#define ETHTOOL_GSTRINGS 0x0000001b /* get specified string set */ -#define ETHTOOL_PHYS_ID 0x0000001c /* identify the NIC */ -#define ETHTOOL_GSTATS 0x0000001d /* get NIC-specific statistics */ -#define ETHTOOL_GTSO 0x0000001e /* Get TSO enable (ethtool_value) */ -#define ETHTOOL_STSO 0x0000001f /* Set TSO enable (ethtool_value) */ -#define ETHTOOL_GPERMADDR 0x00000020 /* Get permanent hardware address */ -#define ETHTOOL_GUFO 0x00000021 /* Get UFO enable (ethtool_value) */ -#define ETHTOOL_SUFO 0x00000022 /* Set UFO enable (ethtool_value) */ -#define ETHTOOL_GGSO 0x00000023 /* Get GSO enable (ethtool_value) */ -#define ETHTOOL_SGSO 0x00000024 /* Set GSO enable (ethtool_value) */ -#define ETHTOOL_GFLAGS 0x00000025 /* Get flags bitmap(ethtool_value) */ -#define ETHTOOL_SFLAGS 0x00000026 /* Set flags bitmap(ethtool_value) */ -#define ETHTOOL_GPFLAGS 0x00000027 /* Get driver-private flags bitmap */ -#define ETHTOOL_SPFLAGS 0x00000028 /* Set driver-private flags bitmap */ - -#define ETHTOOL_GRXFH 0x00000029 /* Get RX flow hash configuration */ -#define ETHTOOL_SRXFH 0x0000002a /* Set RX flow hash configuration */ -#define ETHTOOL_GGRO 0x0000002b /* Get GRO enable (ethtool_value) */ -#define ETHTOOL_SGRO 0x0000002c /* Set GRO enable (ethtool_value) */ -#define ETHTOOL_GRXRINGS 0x0000002d /* Get RX rings available for LB */ -#define ETHTOOL_GRXCLSRLCNT 0x0000002e /* Get RX class rule count */ -#define ETHTOOL_GRXCLSRULE 0x0000002f /* Get RX classification rule */ -#define ETHTOOL_GRXCLSRLALL 0x00000030 /* Get all RX classification rule */ -#define ETHTOOL_SRXCLSRLDEL 0x00000031 /* Delete RX classification rule */ -#define ETHTOOL_SRXCLSRLINS 0x00000032 /* Insert RX classification rule */ -#define ETHTOOL_FLASHDEV 0x00000033 /* Flash firmware to device */ -#define ETHTOOL_RESET 0x00000034 /* Reset hardware */ -#define ETHTOOL_SRXNTUPLE 0x00000035 /* Add an n-tuple filter to device */ -#define ETHTOOL_GRXNTUPLE 0x00000036 /* deprecated */ -#define ETHTOOL_GSSET_INFO 0x00000037 /* Get string set info */ -#define ETHTOOL_GRXFHINDIR 0x00000038 /* Get RX flow hash indir'n table */ -#define ETHTOOL_SRXFHINDIR 0x00000039 /* Set RX flow hash indir'n table */ - -#define ETHTOOL_GFEATURES 0x0000003a /* Get device offload settings */ -#define ETHTOOL_SFEATURES 0x0000003b /* Change device offload settings */ -#define ETHTOOL_GCHANNELS 0x0000003c /* Get no of channels */ -#define ETHTOOL_SCHANNELS 0x0000003d /* Set no of channels */ -#define ETHTOOL_SET_DUMP 0x0000003e /* Set dump settings */ -#define ETHTOOL_GET_DUMP_FLAG 0x0000003f /* Get dump settings */ -#define ETHTOOL_GET_DUMP_DATA 0x00000040 /* Get dump data */ -#define ETHTOOL_GET_TS_INFO 0x00000041 /* Get time stamping and PHC info */ -#define ETHTOOL_GMODULEINFO 0x00000042 /* Get plug-in module information */ -#define ETHTOOL_GMODULEEEPROM 0x00000043 /* Get plug-in module eeprom */ -#define ETHTOOL_GEEE 0x00000044 /* Get EEE settings */ -#define ETHTOOL_SEEE 0x00000045 /* Set EEE settings */ - -/* compatibility with older code */ -#define SPARC_ETH_GSET ETHTOOL_GSET -#define SPARC_ETH_SSET ETHTOOL_SSET - -/* Indicates what features are supported by the interface. */ -#define SUPPORTED_10baseT_Half (1 << 0) -#define SUPPORTED_10baseT_Full (1 << 1) -#define SUPPORTED_100baseT_Half (1 << 2) -#define SUPPORTED_100baseT_Full (1 << 3) -#define SUPPORTED_1000baseT_Half (1 << 4) -#define SUPPORTED_1000baseT_Full (1 << 5) -#define SUPPORTED_Autoneg (1 << 6) -#define SUPPORTED_TP (1 << 7) -#define SUPPORTED_AUI (1 << 8) -#define SUPPORTED_MII (1 << 9) -#define SUPPORTED_FIBRE (1 << 10) -#define SUPPORTED_BNC (1 << 11) -#define SUPPORTED_10000baseT_Full (1 << 12) -#define SUPPORTED_Pause (1 << 13) -#define SUPPORTED_Asym_Pause (1 << 14) -#define SUPPORTED_2500baseX_Full (1 << 15) -#define SUPPORTED_Backplane (1 << 16) -#define SUPPORTED_1000baseKX_Full (1 << 17) -#define SUPPORTED_10000baseKX4_Full (1 << 18) -#define SUPPORTED_10000baseKR_Full (1 << 19) -#define SUPPORTED_10000baseR_FEC (1 << 20) -#define SUPPORTED_20000baseMLD2_Full (1 << 21) -#define SUPPORTED_20000baseKR2_Full (1 << 22) -#define SUPPORTED_40000baseKR4_Full (1 << 23) -#define SUPPORTED_40000baseCR4_Full (1 << 24) -#define SUPPORTED_40000baseSR4_Full (1 << 25) -#define SUPPORTED_40000baseLR4_Full (1 << 26) - -/* Indicates what features are advertised by the interface. */ -#define ADVERTISED_10baseT_Half (1 << 0) -#define ADVERTISED_10baseT_Full (1 << 1) -#define ADVERTISED_100baseT_Half (1 << 2) -#define ADVERTISED_100baseT_Full (1 << 3) -#define ADVERTISED_1000baseT_Half (1 << 4) -#define ADVERTISED_1000baseT_Full (1 << 5) -#define ADVERTISED_Autoneg (1 << 6) -#define ADVERTISED_TP (1 << 7) -#define ADVERTISED_AUI (1 << 8) -#define ADVERTISED_MII (1 << 9) -#define ADVERTISED_FIBRE (1 << 10) -#define ADVERTISED_BNC (1 << 11) -#define ADVERTISED_10000baseT_Full (1 << 12) -#define ADVERTISED_Pause (1 << 13) -#define ADVERTISED_Asym_Pause (1 << 14) -#define ADVERTISED_2500baseX_Full (1 << 15) -#define ADVERTISED_Backplane (1 << 16) -#define ADVERTISED_1000baseKX_Full (1 << 17) -#define ADVERTISED_10000baseKX4_Full (1 << 18) -#define ADVERTISED_10000baseKR_Full (1 << 19) -#define ADVERTISED_10000baseR_FEC (1 << 20) -#define ADVERTISED_20000baseMLD2_Full (1 << 21) -#define ADVERTISED_20000baseKR2_Full (1 << 22) -#define ADVERTISED_40000baseKR4_Full (1 << 23) -#define ADVERTISED_40000baseCR4_Full (1 << 24) -#define ADVERTISED_40000baseSR4_Full (1 << 25) -#define ADVERTISED_40000baseLR4_Full (1 << 26) - -/* The following are all involved in forcing a particular link - * mode for the device for setting things. When getting the - * devices settings, these indicate the current mode and whether - * it was forced up into this mode or autonegotiated. - */ - -/* The forced speed, 10Mb, 100Mb, gigabit, 2.5Gb, 10GbE. */ -#define SPEED_10 10 -#define SPEED_100 100 -#define SPEED_1000 1000 -#define SPEED_2500 2500 -#define SPEED_10000 10000 -#define SPEED_UNKNOWN -1 - -/* Duplex, half or full. */ -#define DUPLEX_HALF 0x00 -#define DUPLEX_FULL 0x01 -#define DUPLEX_UNKNOWN 0xff - -/* Which connector port. */ -#define PORT_TP 0x00 -#define PORT_AUI 0x01 -#define PORT_MII 0x02 -#define PORT_FIBRE 0x03 -#define PORT_BNC 0x04 -#define PORT_DA 0x05 -#define PORT_NONE 0xef -#define PORT_OTHER 0xff - -/* Which transceiver to use. */ -#define XCVR_INTERNAL 0x00 -#define XCVR_EXTERNAL 0x01 -#define XCVR_DUMMY1 0x02 -#define XCVR_DUMMY2 0x03 -#define XCVR_DUMMY3 0x04 - -/* Enable or disable autonegotiation. If this is set to enable, - * the forced link modes above are completely ignored. - */ -#define AUTONEG_DISABLE 0x00 -#define AUTONEG_ENABLE 0x01 - -/* MDI or MDI-X status/control - if MDI/MDI_X/AUTO is set then - * the driver is required to renegotiate link - */ -#define ETH_TP_MDI_INVALID 0x00 /* status: unknown; control: unsupported */ -#define ETH_TP_MDI 0x01 /* status: MDI; control: force MDI */ -#define ETH_TP_MDI_X 0x02 /* status: MDI-X; control: force MDI-X */ -#define ETH_TP_MDI_AUTO 0x03 /* control: auto-select */ - -/* Wake-On-Lan options. */ -#define WAKE_PHY (1 << 0) -#define WAKE_UCAST (1 << 1) -#define WAKE_MCAST (1 << 2) -#define WAKE_BCAST (1 << 3) -#define WAKE_ARP (1 << 4) -#define WAKE_MAGIC (1 << 5) -#define WAKE_MAGICSECURE (1 << 6) /* only meaningful if WAKE_MAGIC */ - -/* L2-L4 network traffic flow types */ -#define TCP_V4_FLOW 0x01 /* hash or spec (tcp_ip4_spec) */ -#define UDP_V4_FLOW 0x02 /* hash or spec (udp_ip4_spec) */ -#define SCTP_V4_FLOW 0x03 /* hash or spec (sctp_ip4_spec) */ -#define AH_ESP_V4_FLOW 0x04 /* hash only */ -#define TCP_V6_FLOW 0x05 /* hash only */ -#define UDP_V6_FLOW 0x06 /* hash only */ -#define SCTP_V6_FLOW 0x07 /* hash only */ -#define AH_ESP_V6_FLOW 0x08 /* hash only */ -#define AH_V4_FLOW 0x09 /* hash or spec (ah_ip4_spec) */ -#define ESP_V4_FLOW 0x0a /* hash or spec (esp_ip4_spec) */ -#define AH_V6_FLOW 0x0b /* hash only */ -#define ESP_V6_FLOW 0x0c /* hash only */ -#define IP_USER_FLOW 0x0d /* spec only (usr_ip4_spec) */ -#define IPV4_FLOW 0x10 /* hash only */ -#define IPV6_FLOW 0x11 /* hash only */ -#define ETHER_FLOW 0x12 /* spec only (ether_spec) */ -/* Flag to enable additional fields in struct ethtool_rx_flow_spec */ -#define FLOW_EXT 0x80000000 - -/* L3-L4 network traffic flow hash options */ -#define RXH_L2DA (1 << 1) -#define RXH_VLAN (1 << 2) -#define RXH_L3_PROTO (1 << 3) -#define RXH_IP_SRC (1 << 4) -#define RXH_IP_DST (1 << 5) -#define RXH_L4_B_0_1 (1 << 6) /* src port in case of TCP/UDP/SCTP */ -#define RXH_L4_B_2_3 (1 << 7) /* dst port in case of TCP/UDP/SCTP */ -#define RXH_DISCARD (1 << 31) - -#define RX_CLS_FLOW_DISC 0xffffffffffffffffULL - -/* Special RX classification rule insert location values */ -#define RX_CLS_LOC_SPECIAL 0x80000000 /* flag */ -#define RX_CLS_LOC_ANY 0xffffffff -#define RX_CLS_LOC_FIRST 0xfffffffe -#define RX_CLS_LOC_LAST 0xfffffffd - -/* EEPROM Standards for plug in modules */ -#define ETH_MODULE_SFF_8079 0x1 -#define ETH_MODULE_SFF_8079_LEN 256 -#define ETH_MODULE_SFF_8472 0x2 -#define ETH_MODULE_SFF_8472_LEN 512 - -/* Reset flags */ -/* The reset() operation must clear the flags for the components which - * were actually reset. On successful return, the flags indicate the - * components which were not reset, either because they do not exist - * in the hardware or because they cannot be reset independently. The - * driver must never reset any components that were not requested. - */ -enum ethtool_reset_flags { - /* These flags represent components dedicated to the interface - * the command is addressed to. Shift any flag left by - * ETH_RESET_SHARED_SHIFT to reset a shared component of the - * same type. - */ - ETH_RESET_MGMT = 1 << 0, /* Management processor */ - ETH_RESET_IRQ = 1 << 1, /* Interrupt requester */ - ETH_RESET_DMA = 1 << 2, /* DMA engine */ - ETH_RESET_FILTER = 1 << 3, /* Filtering/flow direction */ - ETH_RESET_OFFLOAD = 1 << 4, /* Protocol offload */ - ETH_RESET_MAC = 1 << 5, /* Media access controller */ - ETH_RESET_PHY = 1 << 6, /* Transceiver/PHY */ - ETH_RESET_RAM = 1 << 7, /* RAM shared between - * multiple components */ - - ETH_RESET_DEDICATED = 0x0000ffff, /* All components dedicated to - * this interface */ - ETH_RESET_ALL = 0xffffffff, /* All components used by this - * interface, even if shared */ -}; -#define ETH_RESET_SHARED_SHIFT 16 - #endif /* _LINUX_ETHTOOL_H */ diff --git a/include/linux/eventpoll.h b/include/linux/eventpoll.h index 41085d0f3955..6daf6d4971f6 100644 --- a/include/linux/eventpoll.h +++ b/include/linux/eventpoll.h @@ -10,59 +10,11 @@ * Davide Libenzi <davidel@xmailserver.org> * */ - #ifndef _LINUX_EVENTPOLL_H #define _LINUX_EVENTPOLL_H -/* For O_CLOEXEC */ -#include <linux/fcntl.h> -#include <linux/types.h> - -/* Flags for epoll_create1. */ -#define EPOLL_CLOEXEC O_CLOEXEC - -/* Valid opcodes to issue to sys_epoll_ctl() */ -#define EPOLL_CTL_ADD 1 -#define EPOLL_CTL_DEL 2 -#define EPOLL_CTL_MOD 3 -#define EPOLL_CTL_DISABLE 4 - -/* - * Request the handling of system wakeup events so as to prevent system suspends - * from happening while those events are being processed. - * - * Assuming neither EPOLLET nor EPOLLONESHOT is set, system suspends will not be - * re-allowed until epoll_wait is called again after consuming the wakeup - * event(s). - * - * Requires CAP_BLOCK_SUSPEND - */ -#define EPOLLWAKEUP (1 << 29) - -/* Set the One Shot behaviour for the target file descriptor */ -#define EPOLLONESHOT (1 << 30) +#include <uapi/linux/eventpoll.h> -/* Set the Edge Triggered behaviour for the target file descriptor */ -#define EPOLLET (1 << 31) - -/* - * On x86-64 make the 64bit structure have the same alignment as the - * 32bit structure. This makes 32bit emulation easier. - * - * UML/x86_64 needs the same packing as x86_64 - */ -#ifdef __x86_64__ -#define EPOLL_PACKED __attribute__((packed)) -#else -#define EPOLL_PACKED -#endif - -struct epoll_event { - __u32 events; - __u64 data; -} EPOLL_PACKED; - -#ifdef __KERNEL__ /* Forward declarations to avoid compiler errors */ struct file; @@ -116,7 +68,4 @@ static inline void eventpoll_release(struct file *file) {} #endif -#endif /* #ifdef __KERNEL__ */ - #endif /* #ifndef _LINUX_EVENTPOLL_H */ - diff --git a/include/linux/falloc.h b/include/linux/falloc.h index d39b824a780c..31591686ac2d 100644 --- a/include/linux/falloc.h +++ b/include/linux/falloc.h @@ -1,11 +1,8 @@ #ifndef _FALLOC_H_ #define _FALLOC_H_ -#define FALLOC_FL_KEEP_SIZE 0x01 /* default is extend size */ -#define FALLOC_FL_PUNCH_HOLE 0x02 /* de-allocates range */ -#define FALLOC_FL_NO_HIDE_STALE 0x04 /* reserved codepoint */ +#include <uapi/linux/falloc.h> -#ifdef __KERNEL__ /* * Space reservation ioctls and argument structure @@ -24,6 +21,4 @@ struct space_resv { #define FS_IOC_RESVSP _IOW('X', 40, struct space_resv) #define FS_IOC_RESVSP64 _IOW('X', 42, struct space_resv) -#endif /* __KERNEL__ */ - #endif /* _FALLOC_H_ */ diff --git a/include/linux/fanotify.h b/include/linux/fanotify.h index 6c6133f76e16..cef93ddcc5a0 100644 --- a/include/linux/fanotify.h +++ b/include/linux/fanotify.h @@ -1,120 +1,8 @@ #ifndef _LINUX_FANOTIFY_H #define _LINUX_FANOTIFY_H -#include <linux/types.h> +#include <uapi/linux/fanotify.h> -/* the following events that user-space can register for */ -#define FAN_ACCESS 0x00000001 /* File was accessed */ -#define FAN_MODIFY 0x00000002 /* File was modified */ -#define FAN_CLOSE_WRITE 0x00000008 /* Writtable file closed */ -#define FAN_CLOSE_NOWRITE 0x00000010 /* Unwrittable file closed */ -#define FAN_OPEN 0x00000020 /* File was opened */ - -#define FAN_Q_OVERFLOW 0x00004000 /* Event queued overflowed */ - -#define FAN_OPEN_PERM 0x00010000 /* File open in perm check */ -#define FAN_ACCESS_PERM 0x00020000 /* File accessed in perm check */ - -#define FAN_ONDIR 0x40000000 /* event occurred against dir */ - -#define FAN_EVENT_ON_CHILD 0x08000000 /* interested in child events */ - -/* helper events */ -#define FAN_CLOSE (FAN_CLOSE_WRITE | FAN_CLOSE_NOWRITE) /* close */ - -/* flags used for fanotify_init() */ -#define FAN_CLOEXEC 0x00000001 -#define FAN_NONBLOCK 0x00000002 - -/* These are NOT bitwise flags. Both bits are used togther. */ -#define FAN_CLASS_NOTIF 0x00000000 -#define FAN_CLASS_CONTENT 0x00000004 -#define FAN_CLASS_PRE_CONTENT 0x00000008 -#define FAN_ALL_CLASS_BITS (FAN_CLASS_NOTIF | FAN_CLASS_CONTENT | \ - FAN_CLASS_PRE_CONTENT) - -#define FAN_UNLIMITED_QUEUE 0x00000010 -#define FAN_UNLIMITED_MARKS 0x00000020 - -#define FAN_ALL_INIT_FLAGS (FAN_CLOEXEC | FAN_NONBLOCK | \ - FAN_ALL_CLASS_BITS | FAN_UNLIMITED_QUEUE |\ - FAN_UNLIMITED_MARKS) - -/* flags used for fanotify_modify_mark() */ -#define FAN_MARK_ADD 0x00000001 -#define FAN_MARK_REMOVE 0x00000002 -#define FAN_MARK_DONT_FOLLOW 0x00000004 -#define FAN_MARK_ONLYDIR 0x00000008 -#define FAN_MARK_MOUNT 0x00000010 -#define FAN_MARK_IGNORED_MASK 0x00000020 -#define FAN_MARK_IGNORED_SURV_MODIFY 0x00000040 -#define FAN_MARK_FLUSH 0x00000080 -#ifdef __KERNEL__ /* not valid from userspace, only kernel internal */ #define FAN_MARK_ONDIR 0x00000100 -#endif - -#define FAN_ALL_MARK_FLAGS (FAN_MARK_ADD |\ - FAN_MARK_REMOVE |\ - FAN_MARK_DONT_FOLLOW |\ - FAN_MARK_ONLYDIR |\ - FAN_MARK_MOUNT |\ - FAN_MARK_IGNORED_MASK |\ - FAN_MARK_IGNORED_SURV_MODIFY |\ - FAN_MARK_FLUSH) - -/* - * All of the events - we build the list by hand so that we can add flags in - * the future and not break backward compatibility. Apps will get only the - * events that they originally wanted. Be sure to add new events here! - */ -#define FAN_ALL_EVENTS (FAN_ACCESS |\ - FAN_MODIFY |\ - FAN_CLOSE |\ - FAN_OPEN) - -/* - * All events which require a permission response from userspace - */ -#define FAN_ALL_PERM_EVENTS (FAN_OPEN_PERM |\ - FAN_ACCESS_PERM) - -#define FAN_ALL_OUTGOING_EVENTS (FAN_ALL_EVENTS |\ - FAN_ALL_PERM_EVENTS |\ - FAN_Q_OVERFLOW) - -#define FANOTIFY_METADATA_VERSION 3 - -struct fanotify_event_metadata { - __u32 event_len; - __u8 vers; - __u8 reserved; - __u16 metadata_len; - __aligned_u64 mask; - __s32 fd; - __s32 pid; -}; - -struct fanotify_response { - __s32 fd; - __u32 response; -}; - -/* Legit userspace responses to a _PERM event */ -#define FAN_ALLOW 0x01 -#define FAN_DENY 0x02 -/* No fd set in event */ -#define FAN_NOFD -1 - -/* Helper functions to deal with fanotify_event_metadata buffers */ -#define FAN_EVENT_METADATA_LEN (sizeof(struct fanotify_event_metadata)) - -#define FAN_EVENT_NEXT(meta, len) ((len) -= (meta)->event_len, \ - (struct fanotify_event_metadata*)(((char *)(meta)) + \ - (meta)->event_len)) - -#define FAN_EVENT_OK(meta, len) ((long)(len) >= (long)FAN_EVENT_METADATA_LEN && \ - (long)(meta)->event_len >= (long)FAN_EVENT_METADATA_LEN && \ - (long)(meta)->event_len <= (long)(len)) - #endif /* _LINUX_FANOTIFY_H */ diff --git a/include/linux/fb.h b/include/linux/fb.h index ac3f1c605843..c7a95714b1fe 100644 --- a/include/linux/fb.h +++ b/include/linux/fb.h @@ -1,409 +1,10 @@ #ifndef _LINUX_FB_H #define _LINUX_FB_H -#include <linux/types.h> -#include <linux/i2c.h> -#ifdef __KERNEL__ #include <linux/kgdb.h> -#endif /* __KERNEL__ */ +#include <uapi/linux/fb.h> -/* Definitions of frame buffers */ - -#define FB_MAX 32 /* sufficient for now */ - -/* ioctls - 0x46 is 'F' */ -#define FBIOGET_VSCREENINFO 0x4600 -#define FBIOPUT_VSCREENINFO 0x4601 -#define FBIOGET_FSCREENINFO 0x4602 -#define FBIOGETCMAP 0x4604 -#define FBIOPUTCMAP 0x4605 -#define FBIOPAN_DISPLAY 0x4606 -#ifdef __KERNEL__ #define FBIO_CURSOR _IOWR('F', 0x08, struct fb_cursor_user) -#else -#define FBIO_CURSOR _IOWR('F', 0x08, struct fb_cursor) -#endif -/* 0x4607-0x460B are defined below */ -/* #define FBIOGET_MONITORSPEC 0x460C */ -/* #define FBIOPUT_MONITORSPEC 0x460D */ -/* #define FBIOSWITCH_MONIBIT 0x460E */ -#define FBIOGET_CON2FBMAP 0x460F -#define FBIOPUT_CON2FBMAP 0x4610 -#define FBIOBLANK 0x4611 /* arg: 0 or vesa level + 1 */ -#define FBIOGET_VBLANK _IOR('F', 0x12, struct fb_vblank) -#define FBIO_ALLOC 0x4613 -#define FBIO_FREE 0x4614 -#define FBIOGET_GLYPH 0x4615 -#define FBIOGET_HWCINFO 0x4616 -#define FBIOPUT_MODEINFO 0x4617 -#define FBIOGET_DISPINFO 0x4618 -#define FBIO_WAITFORVSYNC _IOW('F', 0x20, __u32) - -#define FB_TYPE_PACKED_PIXELS 0 /* Packed Pixels */ -#define FB_TYPE_PLANES 1 /* Non interleaved planes */ -#define FB_TYPE_INTERLEAVED_PLANES 2 /* Interleaved planes */ -#define FB_TYPE_TEXT 3 /* Text/attributes */ -#define FB_TYPE_VGA_PLANES 4 /* EGA/VGA planes */ -#define FB_TYPE_FOURCC 5 /* Type identified by a V4L2 FOURCC */ - -#define FB_AUX_TEXT_MDA 0 /* Monochrome text */ -#define FB_AUX_TEXT_CGA 1 /* CGA/EGA/VGA Color text */ -#define FB_AUX_TEXT_S3_MMIO 2 /* S3 MMIO fasttext */ -#define FB_AUX_TEXT_MGA_STEP16 3 /* MGA Millenium I: text, attr, 14 reserved bytes */ -#define FB_AUX_TEXT_MGA_STEP8 4 /* other MGAs: text, attr, 6 reserved bytes */ -#define FB_AUX_TEXT_SVGA_GROUP 8 /* 8-15: SVGA tileblit compatible modes */ -#define FB_AUX_TEXT_SVGA_MASK 7 /* lower three bits says step */ -#define FB_AUX_TEXT_SVGA_STEP2 8 /* SVGA text mode: text, attr */ -#define FB_AUX_TEXT_SVGA_STEP4 9 /* SVGA text mode: text, attr, 2 reserved bytes */ -#define FB_AUX_TEXT_SVGA_STEP8 10 /* SVGA text mode: text, attr, 6 reserved bytes */ -#define FB_AUX_TEXT_SVGA_STEP16 11 /* SVGA text mode: text, attr, 14 reserved bytes */ -#define FB_AUX_TEXT_SVGA_LAST 15 /* reserved up to 15 */ - -#define FB_AUX_VGA_PLANES_VGA4 0 /* 16 color planes (EGA/VGA) */ -#define FB_AUX_VGA_PLANES_CFB4 1 /* CFB4 in planes (VGA) */ -#define FB_AUX_VGA_PLANES_CFB8 2 /* CFB8 in planes (VGA) */ - -#define FB_VISUAL_MONO01 0 /* Monochr. 1=Black 0=White */ -#define FB_VISUAL_MONO10 1 /* Monochr. 1=White 0=Black */ -#define FB_VISUAL_TRUECOLOR 2 /* True color */ -#define FB_VISUAL_PSEUDOCOLOR 3 /* Pseudo color (like atari) */ -#define FB_VISUAL_DIRECTCOLOR 4 /* Direct color */ -#define FB_VISUAL_STATIC_PSEUDOCOLOR 5 /* Pseudo color readonly */ -#define FB_VISUAL_FOURCC 6 /* Visual identified by a V4L2 FOURCC */ - -#define FB_ACCEL_NONE 0 /* no hardware accelerator */ -#define FB_ACCEL_ATARIBLITT 1 /* Atari Blitter */ -#define FB_ACCEL_AMIGABLITT 2 /* Amiga Blitter */ -#define FB_ACCEL_S3_TRIO64 3 /* Cybervision64 (S3 Trio64) */ -#define FB_ACCEL_NCR_77C32BLT 4 /* RetinaZ3 (NCR 77C32BLT) */ -#define FB_ACCEL_S3_VIRGE 5 /* Cybervision64/3D (S3 ViRGE) */ -#define FB_ACCEL_ATI_MACH64GX 6 /* ATI Mach 64GX family */ -#define FB_ACCEL_DEC_TGA 7 /* DEC 21030 TGA */ -#define FB_ACCEL_ATI_MACH64CT 8 /* ATI Mach 64CT family */ -#define FB_ACCEL_ATI_MACH64VT 9 /* ATI Mach 64CT family VT class */ -#define FB_ACCEL_ATI_MACH64GT 10 /* ATI Mach 64CT family GT class */ -#define FB_ACCEL_SUN_CREATOR 11 /* Sun Creator/Creator3D */ -#define FB_ACCEL_SUN_CGSIX 12 /* Sun cg6 */ -#define FB_ACCEL_SUN_LEO 13 /* Sun leo/zx */ -#define FB_ACCEL_IMS_TWINTURBO 14 /* IMS Twin Turbo */ -#define FB_ACCEL_3DLABS_PERMEDIA2 15 /* 3Dlabs Permedia 2 */ -#define FB_ACCEL_MATROX_MGA2064W 16 /* Matrox MGA2064W (Millenium) */ -#define FB_ACCEL_MATROX_MGA1064SG 17 /* Matrox MGA1064SG (Mystique) */ -#define FB_ACCEL_MATROX_MGA2164W 18 /* Matrox MGA2164W (Millenium II) */ -#define FB_ACCEL_MATROX_MGA2164W_AGP 19 /* Matrox MGA2164W (Millenium II) */ -#define FB_ACCEL_MATROX_MGAG100 20 /* Matrox G100 (Productiva G100) */ -#define FB_ACCEL_MATROX_MGAG200 21 /* Matrox G200 (Myst, Mill, ...) */ -#define FB_ACCEL_SUN_CG14 22 /* Sun cgfourteen */ -#define FB_ACCEL_SUN_BWTWO 23 /* Sun bwtwo */ -#define FB_ACCEL_SUN_CGTHREE 24 /* Sun cgthree */ -#define FB_ACCEL_SUN_TCX 25 /* Sun tcx */ -#define FB_ACCEL_MATROX_MGAG400 26 /* Matrox G400 */ -#define FB_ACCEL_NV3 27 /* nVidia RIVA 128 */ -#define FB_ACCEL_NV4 28 /* nVidia RIVA TNT */ -#define FB_ACCEL_NV5 29 /* nVidia RIVA TNT2 */ -#define FB_ACCEL_CT_6555x 30 /* C&T 6555x */ -#define FB_ACCEL_3DFX_BANSHEE 31 /* 3Dfx Banshee */ -#define FB_ACCEL_ATI_RAGE128 32 /* ATI Rage128 family */ -#define FB_ACCEL_IGS_CYBER2000 33 /* CyberPro 2000 */ -#define FB_ACCEL_IGS_CYBER2010 34 /* CyberPro 2010 */ -#define FB_ACCEL_IGS_CYBER5000 35 /* CyberPro 5000 */ -#define FB_ACCEL_SIS_GLAMOUR 36 /* SiS 300/630/540 */ -#define FB_ACCEL_3DLABS_PERMEDIA3 37 /* 3Dlabs Permedia 3 */ -#define FB_ACCEL_ATI_RADEON 38 /* ATI Radeon family */ -#define FB_ACCEL_I810 39 /* Intel 810/815 */ -#define FB_ACCEL_SIS_GLAMOUR_2 40 /* SiS 315, 650, 740 */ -#define FB_ACCEL_SIS_XABRE 41 /* SiS 330 ("Xabre") */ -#define FB_ACCEL_I830 42 /* Intel 830M/845G/85x/865G */ -#define FB_ACCEL_NV_10 43 /* nVidia Arch 10 */ -#define FB_ACCEL_NV_20 44 /* nVidia Arch 20 */ -#define FB_ACCEL_NV_30 45 /* nVidia Arch 30 */ -#define FB_ACCEL_NV_40 46 /* nVidia Arch 40 */ -#define FB_ACCEL_XGI_VOLARI_V 47 /* XGI Volari V3XT, V5, V8 */ -#define FB_ACCEL_XGI_VOLARI_Z 48 /* XGI Volari Z7 */ -#define FB_ACCEL_OMAP1610 49 /* TI OMAP16xx */ -#define FB_ACCEL_TRIDENT_TGUI 50 /* Trident TGUI */ -#define FB_ACCEL_TRIDENT_3DIMAGE 51 /* Trident 3DImage */ -#define FB_ACCEL_TRIDENT_BLADE3D 52 /* Trident Blade3D */ -#define FB_ACCEL_TRIDENT_BLADEXP 53 /* Trident BladeXP */ -#define FB_ACCEL_CIRRUS_ALPINE 53 /* Cirrus Logic 543x/544x/5480 */ -#define FB_ACCEL_NEOMAGIC_NM2070 90 /* NeoMagic NM2070 */ -#define FB_ACCEL_NEOMAGIC_NM2090 91 /* NeoMagic NM2090 */ -#define FB_ACCEL_NEOMAGIC_NM2093 92 /* NeoMagic NM2093 */ -#define FB_ACCEL_NEOMAGIC_NM2097 93 /* NeoMagic NM2097 */ -#define FB_ACCEL_NEOMAGIC_NM2160 94 /* NeoMagic NM2160 */ -#define FB_ACCEL_NEOMAGIC_NM2200 95 /* NeoMagic NM2200 */ -#define FB_ACCEL_NEOMAGIC_NM2230 96 /* NeoMagic NM2230 */ -#define FB_ACCEL_NEOMAGIC_NM2360 97 /* NeoMagic NM2360 */ -#define FB_ACCEL_NEOMAGIC_NM2380 98 /* NeoMagic NM2380 */ -#define FB_ACCEL_PXA3XX 99 /* PXA3xx */ - -#define FB_ACCEL_SAVAGE4 0x80 /* S3 Savage4 */ -#define FB_ACCEL_SAVAGE3D 0x81 /* S3 Savage3D */ -#define FB_ACCEL_SAVAGE3D_MV 0x82 /* S3 Savage3D-MV */ -#define FB_ACCEL_SAVAGE2000 0x83 /* S3 Savage2000 */ -#define FB_ACCEL_SAVAGE_MX_MV 0x84 /* S3 Savage/MX-MV */ -#define FB_ACCEL_SAVAGE_MX 0x85 /* S3 Savage/MX */ -#define FB_ACCEL_SAVAGE_IX_MV 0x86 /* S3 Savage/IX-MV */ -#define FB_ACCEL_SAVAGE_IX 0x87 /* S3 Savage/IX */ -#define FB_ACCEL_PROSAVAGE_PM 0x88 /* S3 ProSavage PM133 */ -#define FB_ACCEL_PROSAVAGE_KM 0x89 /* S3 ProSavage KM133 */ -#define FB_ACCEL_S3TWISTER_P 0x8a /* S3 Twister */ -#define FB_ACCEL_S3TWISTER_K 0x8b /* S3 TwisterK */ -#define FB_ACCEL_SUPERSAVAGE 0x8c /* S3 Supersavage */ -#define FB_ACCEL_PROSAVAGE_DDR 0x8d /* S3 ProSavage DDR */ -#define FB_ACCEL_PROSAVAGE_DDRK 0x8e /* S3 ProSavage DDR-K */ - -#define FB_ACCEL_PUV3_UNIGFX 0xa0 /* PKUnity-v3 Unigfx */ - -#define FB_CAP_FOURCC 1 /* Device supports FOURCC-based formats */ - -struct fb_fix_screeninfo { - char id[16]; /* identification string eg "TT Builtin" */ - unsigned long smem_start; /* Start of frame buffer mem */ - /* (physical address) */ - __u32 smem_len; /* Length of frame buffer mem */ - __u32 type; /* see FB_TYPE_* */ - __u32 type_aux; /* Interleave for interleaved Planes */ - __u32 visual; /* see FB_VISUAL_* */ - __u16 xpanstep; /* zero if no hardware panning */ - __u16 ypanstep; /* zero if no hardware panning */ - __u16 ywrapstep; /* zero if no hardware ywrap */ - __u32 line_length; /* length of a line in bytes */ - unsigned long mmio_start; /* Start of Memory Mapped I/O */ - /* (physical address) */ - __u32 mmio_len; /* Length of Memory Mapped I/O */ - __u32 accel; /* Indicate to driver which */ - /* specific chip/card we have */ - __u16 capabilities; /* see FB_CAP_* */ - __u16 reserved[2]; /* Reserved for future compatibility */ -}; - -/* Interpretation of offset for color fields: All offsets are from the right, - * inside a "pixel" value, which is exactly 'bits_per_pixel' wide (means: you - * can use the offset as right argument to <<). A pixel afterwards is a bit - * stream and is written to video memory as that unmodified. - * - * For pseudocolor: offset and length should be the same for all color - * components. Offset specifies the position of the least significant bit - * of the pallette index in a pixel value. Length indicates the number - * of available palette entries (i.e. # of entries = 1 << length). - */ -struct fb_bitfield { - __u32 offset; /* beginning of bitfield */ - __u32 length; /* length of bitfield */ - __u32 msb_right; /* != 0 : Most significant bit is */ - /* right */ -}; - -#define FB_NONSTD_HAM 1 /* Hold-And-Modify (HAM) */ -#define FB_NONSTD_REV_PIX_IN_B 2 /* order of pixels in each byte is reversed */ - -#define FB_ACTIVATE_NOW 0 /* set values immediately (or vbl)*/ -#define FB_ACTIVATE_NXTOPEN 1 /* activate on next open */ -#define FB_ACTIVATE_TEST 2 /* don't set, round up impossible */ -#define FB_ACTIVATE_MASK 15 - /* values */ -#define FB_ACTIVATE_VBL 16 /* activate values on next vbl */ -#define FB_CHANGE_CMAP_VBL 32 /* change colormap on vbl */ -#define FB_ACTIVATE_ALL 64 /* change all VCs on this fb */ -#define FB_ACTIVATE_FORCE 128 /* force apply even when no change*/ -#define FB_ACTIVATE_INV_MODE 256 /* invalidate videomode */ - -#define FB_ACCELF_TEXT 1 /* (OBSOLETE) see fb_info.flags and vc_mode */ - -#define FB_SYNC_HOR_HIGH_ACT 1 /* horizontal sync high active */ -#define FB_SYNC_VERT_HIGH_ACT 2 /* vertical sync high active */ -#define FB_SYNC_EXT 4 /* external sync */ -#define FB_SYNC_COMP_HIGH_ACT 8 /* composite sync high active */ -#define FB_SYNC_BROADCAST 16 /* broadcast video timings */ - /* vtotal = 144d/288n/576i => PAL */ - /* vtotal = 121d/242n/484i => NTSC */ -#define FB_SYNC_ON_GREEN 32 /* sync on green */ - -#define FB_VMODE_NONINTERLACED 0 /* non interlaced */ -#define FB_VMODE_INTERLACED 1 /* interlaced */ -#define FB_VMODE_DOUBLE 2 /* double scan */ -#define FB_VMODE_ODD_FLD_FIRST 4 /* interlaced: top line first */ -#define FB_VMODE_MASK 255 - -#define FB_VMODE_YWRAP 256 /* ywrap instead of panning */ -#define FB_VMODE_SMOOTH_XPAN 512 /* smooth xpan possible (internally used) */ -#define FB_VMODE_CONUPDATE 512 /* don't update x/yoffset */ - -/* - * Display rotation support - */ -#define FB_ROTATE_UR 0 -#define FB_ROTATE_CW 1 -#define FB_ROTATE_UD 2 -#define FB_ROTATE_CCW 3 - -#define PICOS2KHZ(a) (1000000000UL/(a)) -#define KHZ2PICOS(a) (1000000000UL/(a)) - -struct fb_var_screeninfo { - __u32 xres; /* visible resolution */ - __u32 yres; - __u32 xres_virtual; /* virtual resolution */ - __u32 yres_virtual; - __u32 xoffset; /* offset from virtual to visible */ - __u32 yoffset; /* resolution */ - - __u32 bits_per_pixel; /* guess what */ - __u32 grayscale; /* 0 = color, 1 = grayscale, */ - /* >1 = FOURCC */ - struct fb_bitfield red; /* bitfield in fb mem if true color, */ - struct fb_bitfield green; /* else only length is significant */ - struct fb_bitfield blue; - struct fb_bitfield transp; /* transparency */ - - __u32 nonstd; /* != 0 Non standard pixel format */ - - __u32 activate; /* see FB_ACTIVATE_* */ - - __u32 height; /* height of picture in mm */ - __u32 width; /* width of picture in mm */ - - __u32 accel_flags; /* (OBSOLETE) see fb_info.flags */ - - /* Timing: All values in pixclocks, except pixclock (of course) */ - __u32 pixclock; /* pixel clock in ps (pico seconds) */ - __u32 left_margin; /* time from sync to picture */ - __u32 right_margin; /* time from picture to sync */ - __u32 upper_margin; /* time from sync to picture */ - __u32 lower_margin; - __u32 hsync_len; /* length of horizontal sync */ - __u32 vsync_len; /* length of vertical sync */ - __u32 sync; /* see FB_SYNC_* */ - __u32 vmode; /* see FB_VMODE_* */ - __u32 rotate; /* angle we rotate counter clockwise */ - __u32 colorspace; /* colorspace for FOURCC-based modes */ - __u32 reserved[4]; /* Reserved for future compatibility */ -}; - -struct fb_cmap { - __u32 start; /* First entry */ - __u32 len; /* Number of entries */ - __u16 *red; /* Red values */ - __u16 *green; - __u16 *blue; - __u16 *transp; /* transparency, can be NULL */ -}; - -struct fb_con2fbmap { - __u32 console; - __u32 framebuffer; -}; - -/* VESA Blanking Levels */ -#define VESA_NO_BLANKING 0 -#define VESA_VSYNC_SUSPEND 1 -#define VESA_HSYNC_SUSPEND 2 -#define VESA_POWERDOWN 3 - - -enum { - /* screen: unblanked, hsync: on, vsync: on */ - FB_BLANK_UNBLANK = VESA_NO_BLANKING, - - /* screen: blanked, hsync: on, vsync: on */ - FB_BLANK_NORMAL = VESA_NO_BLANKING + 1, - - /* screen: blanked, hsync: on, vsync: off */ - FB_BLANK_VSYNC_SUSPEND = VESA_VSYNC_SUSPEND + 1, - - /* screen: blanked, hsync: off, vsync: on */ - FB_BLANK_HSYNC_SUSPEND = VESA_HSYNC_SUSPEND + 1, - - /* screen: blanked, hsync: off, vsync: off */ - FB_BLANK_POWERDOWN = VESA_POWERDOWN + 1 -}; - -#define FB_VBLANK_VBLANKING 0x001 /* currently in a vertical blank */ -#define FB_VBLANK_HBLANKING 0x002 /* currently in a horizontal blank */ -#define FB_VBLANK_HAVE_VBLANK 0x004 /* vertical blanks can be detected */ -#define FB_VBLANK_HAVE_HBLANK 0x008 /* horizontal blanks can be detected */ -#define FB_VBLANK_HAVE_COUNT 0x010 /* global retrace counter is available */ -#define FB_VBLANK_HAVE_VCOUNT 0x020 /* the vcount field is valid */ -#define FB_VBLANK_HAVE_HCOUNT 0x040 /* the hcount field is valid */ -#define FB_VBLANK_VSYNCING 0x080 /* currently in a vsync */ -#define FB_VBLANK_HAVE_VSYNC 0x100 /* verical syncs can be detected */ - -struct fb_vblank { - __u32 flags; /* FB_VBLANK flags */ - __u32 count; /* counter of retraces since boot */ - __u32 vcount; /* current scanline position */ - __u32 hcount; /* current scandot position */ - __u32 reserved[4]; /* reserved for future compatibility */ -}; - -/* Internal HW accel */ -#define ROP_COPY 0 -#define ROP_XOR 1 - -struct fb_copyarea { - __u32 dx; - __u32 dy; - __u32 width; - __u32 height; - __u32 sx; - __u32 sy; -}; - -struct fb_fillrect { - __u32 dx; /* screen-relative */ - __u32 dy; - __u32 width; - __u32 height; - __u32 color; - __u32 rop; -}; - -struct fb_image { - __u32 dx; /* Where to place image */ - __u32 dy; - __u32 width; /* Size of image */ - __u32 height; - __u32 fg_color; /* Only used when a mono bitmap */ - __u32 bg_color; - __u8 depth; /* Depth of the image */ - const char *data; /* Pointer to image data */ - struct fb_cmap cmap; /* color map info */ -}; - -/* - * hardware cursor control - */ - -#define FB_CUR_SETIMAGE 0x01 -#define FB_CUR_SETPOS 0x02 -#define FB_CUR_SETHOT 0x04 -#define FB_CUR_SETCMAP 0x08 -#define FB_CUR_SETSHAPE 0x10 -#define FB_CUR_SETSIZE 0x20 -#define FB_CUR_SETALL 0xFF - -struct fbcurpos { - __u16 x, y; -}; - -struct fb_cursor { - __u16 set; /* what to set */ - __u16 enable; /* cursor on/off */ - __u16 rop; /* bitop operation */ - const char *mask; /* cursor mask bits */ - struct fbcurpos hot; /* cursor hot spot */ - struct fb_image image; /* Cursor image */ -}; - -#ifdef CONFIG_FB_BACKLIGHT -/* Settings for the generic backlight code */ -#define FB_BACKLIGHT_LEVELS 128 -#define FB_BACKLIGHT_MAX 0xFF -#endif - -#ifdef __KERNEL__ #include <linux/fs.h> #include <linux/init.h> @@ -1181,6 +782,4 @@ extern int fb_find_mode(struct fb_var_screeninfo *var, const struct fb_videomode *default_mode, unsigned int default_bpp); -#endif /* __KERNEL__ */ - #endif /* _LINUX_FB_H */ diff --git a/include/linux/fcntl.h b/include/linux/fcntl.h index f550f894ba15..76ce329e656d 100644 --- a/include/linux/fcntl.h +++ b/include/linux/fcntl.h @@ -1,54 +1,8 @@ #ifndef _LINUX_FCNTL_H #define _LINUX_FCNTL_H -#include <asm/fcntl.h> +#include <uapi/linux/fcntl.h> -#define F_SETLEASE (F_LINUX_SPECIFIC_BASE + 0) -#define F_GETLEASE (F_LINUX_SPECIFIC_BASE + 1) - -/* - * Cancel a blocking posix lock; internal use only until we expose an - * asynchronous lock api to userspace: - */ -#define F_CANCELLK (F_LINUX_SPECIFIC_BASE + 5) - -/* Create a file descriptor with FD_CLOEXEC set. */ -#define F_DUPFD_CLOEXEC (F_LINUX_SPECIFIC_BASE + 6) - -/* - * Request nofications on a directory. - * See below for events that may be notified. - */ -#define F_NOTIFY (F_LINUX_SPECIFIC_BASE+2) - -/* - * Set and get of pipe page size array - */ -#define F_SETPIPE_SZ (F_LINUX_SPECIFIC_BASE + 7) -#define F_GETPIPE_SZ (F_LINUX_SPECIFIC_BASE + 8) - -/* - * Types of directory notifications that may be requested. - */ -#define DN_ACCESS 0x00000001 /* File accessed */ -#define DN_MODIFY 0x00000002 /* File modified */ -#define DN_CREATE 0x00000004 /* File created */ -#define DN_DELETE 0x00000008 /* File removed */ -#define DN_RENAME 0x00000010 /* File renamed */ -#define DN_ATTRIB 0x00000020 /* File changed attibutes */ -#define DN_MULTISHOT 0x80000000 /* Don't remove notifier */ - -#define AT_FDCWD -100 /* Special value used to indicate - openat should use the current - working directory. */ -#define AT_SYMLINK_NOFOLLOW 0x100 /* Do not follow symbolic links. */ -#define AT_REMOVEDIR 0x200 /* Remove directory instead of - unlinking file. */ -#define AT_SYMLINK_FOLLOW 0x400 /* Follow symbolic links. */ -#define AT_NO_AUTOMOUNT 0x800 /* Suppress terminal automount traversal */ -#define AT_EMPTY_PATH 0x1000 /* Allow empty relative pathname */ - -#ifdef __KERNEL__ #ifndef force_o_largefile #define force_o_largefile() (BITS_PER_LONG != 32) @@ -74,6 +28,4 @@ #define IS_SETLK(cmd) (IS_SETLK32(cmd) || IS_SETLK64(cmd)) #define IS_SETLKW(cmd) (IS_SETLKW32(cmd) || IS_SETLKW64(cmd)) -#endif /* __KERNEL__ */ - #endif diff --git a/include/linux/fd.h b/include/linux/fd.h index 72202b1b9a6a..69275bccc3e4 100644 --- a/include/linux/fd.h +++ b/include/linux/fd.h @@ -1,384 +1,8 @@ #ifndef _LINUX_FD_H #define _LINUX_FD_H -#include <linux/ioctl.h> -#include <linux/compiler.h> +#include <uapi/linux/fd.h> -/* New file layout: Now the ioctl definitions immediately follow the - * definitions of the structures that they use */ - -/* - * Geometry - */ -struct floppy_struct { - unsigned int size, /* nr of sectors total */ - sect, /* sectors per track */ - head, /* nr of heads */ - track, /* nr of tracks */ - stretch; /* bit 0 !=0 means double track steps */ - /* bit 1 != 0 means swap sides */ - /* bits 2..9 give the first sector */ - /* number (the LSB is flipped) */ -#define FD_STRETCH 1 -#define FD_SWAPSIDES 2 -#define FD_ZEROBASED 4 -#define FD_SECTBASEMASK 0x3FC -#define FD_MKSECTBASE(s) (((s) ^ 1) << 2) -#define FD_SECTBASE(floppy) ((((floppy)->stretch & FD_SECTBASEMASK) >> 2) ^ 1) - - unsigned char gap, /* gap1 size */ - - rate, /* data rate. |= 0x40 for perpendicular */ -#define FD_2M 0x4 -#define FD_SIZECODEMASK 0x38 -#define FD_SIZECODE(floppy) (((((floppy)->rate&FD_SIZECODEMASK)>> 3)+ 2) %8) -#define FD_SECTSIZE(floppy) ( (floppy)->rate & FD_2M ? \ - 512 : 128 << FD_SIZECODE(floppy) ) -#define FD_PERP 0x40 - - spec1, /* stepping rate, head unload time */ - fmt_gap; /* gap2 size */ - const char * name; /* used only for predefined formats */ -}; - - -/* commands needing write access have 0x40 set */ -/* commands needing super user access have 0x80 set */ - -#define FDCLRPRM _IO(2, 0x41) -/* clear user-defined parameters */ - -#define FDSETPRM _IOW(2, 0x42, struct floppy_struct) -#define FDSETMEDIAPRM FDSETPRM -/* set user-defined parameters for current media */ - -#define FDDEFPRM _IOW(2, 0x43, struct floppy_struct) -#define FDGETPRM _IOR(2, 0x04, struct floppy_struct) -#define FDDEFMEDIAPRM FDDEFPRM -#define FDGETMEDIAPRM FDGETPRM -/* set/get disk parameters */ - - -#define FDMSGON _IO(2,0x45) -#define FDMSGOFF _IO(2,0x46) -/* issue/don't issue kernel messages on media type change */ - - -/* - * Formatting (obsolete) - */ -#define FD_FILL_BYTE 0xF6 /* format fill byte. */ - -struct format_descr { - unsigned int device,head,track; -}; - -#define FDFMTBEG _IO(2,0x47) -/* begin formatting a disk */ -#define FDFMTTRK _IOW(2,0x48, struct format_descr) -/* format the specified track */ -#define FDFMTEND _IO(2,0x49) -/* end formatting a disk */ - - -/* - * Error thresholds - */ -struct floppy_max_errors { - unsigned int - abort, /* number of errors to be reached before aborting */ - read_track, /* maximal number of errors permitted to read an - * entire track at once */ - reset, /* maximal number of errors before a reset is tried */ - recal, /* maximal number of errors before a recalibrate is - * tried */ - - /* - * Threshold for reporting FDC errors to the console. - * Setting this to zero may flood your screen when using - * ultra cheap floppies ;-) - */ - reporting; - -}; - -#define FDSETEMSGTRESH _IO(2,0x4a) -/* set fdc error reporting threshold */ - -#define FDFLUSH _IO(2,0x4b) -/* flush buffers for media; either for verifying media, or for - * handling a media change without closing the file descriptor */ - -#define FDSETMAXERRS _IOW(2, 0x4c, struct floppy_max_errors) -#define FDGETMAXERRS _IOR(2, 0x0e, struct floppy_max_errors) -/* set/get abortion and read_track threshold. See also floppy_drive_params - * structure */ - - -typedef char floppy_drive_name[16]; -#define FDGETDRVTYP _IOR(2, 0x0f, floppy_drive_name) -/* get drive type: 5 1/4 or 3 1/2 */ - - -/* - * Drive parameters (user modifiable) - */ -struct floppy_drive_params { - signed char cmos; /* CMOS type */ - - /* Spec2 is (HLD<<1 | ND), where HLD is head load time (1=2ms, 2=4 ms - * etc) and ND is set means no DMA. Hardcoded to 6 (HLD=6ms, use DMA). - */ - unsigned long max_dtr; /* Step rate, usec */ - unsigned long hlt; /* Head load/settle time, msec */ - unsigned long hut; /* Head unload time (remnant of - * 8" drives) */ - unsigned long srt; /* Step rate, usec */ - - unsigned long spinup; /* time needed for spinup (expressed - * in jiffies) */ - unsigned long spindown; /* timeout needed for spindown */ - unsigned char spindown_offset; /* decides in which position the disk - * will stop */ - unsigned char select_delay; /* delay to wait after select */ - unsigned char rps; /* rotations per second */ - unsigned char tracks; /* maximum number of tracks */ - unsigned long timeout; /* timeout for interrupt requests */ - - unsigned char interleave_sect; /* if there are more sectors, use - * interleave */ - - struct floppy_max_errors max_errors; - - char flags; /* various flags, including ftd_msg */ -/* - * Announce successful media type detection and media information loss after - * disk changes. - * Also used to enable/disable printing of overrun warnings. - */ - -#define FTD_MSG 0x10 -#define FD_BROKEN_DCL 0x20 -#define FD_DEBUG 0x02 -#define FD_SILENT_DCL_CLEAR 0x4 -#define FD_INVERTED_DCL 0x80 /* must be 0x80, because of hardware - considerations */ - - char read_track; /* use readtrack during probing? */ - -/* - * Auto-detection. Each drive type has eight formats which are - * used in succession to try to read the disk. If the FDC cannot lock onto - * the disk, the next format is tried. This uses the variable 'probing'. - */ - short autodetect[8]; /* autodetected formats */ - - int checkfreq; /* how often should the drive be checked for disk - * changes */ - int native_format; /* native format of this drive */ -}; - -enum { - FD_NEED_TWADDLE_BIT, /* more magic */ - FD_VERIFY_BIT, /* inquire for write protection */ - FD_DISK_NEWCHANGE_BIT, /* change detected, and no action undertaken yet - * to clear media change status */ - FD_UNUSED_BIT, - FD_DISK_CHANGED_BIT, /* disk has been changed since last i/o */ - FD_DISK_WRITABLE_BIT /* disk is writable */ -}; - -#define FDSETDRVPRM _IOW(2, 0x90, struct floppy_drive_params) -#define FDGETDRVPRM _IOR(2, 0x11, struct floppy_drive_params) -/* set/get drive parameters */ - - -/* - * Current drive state (not directly modifiable by user, readonly) - */ -struct floppy_drive_struct { - unsigned long flags; -/* values for these flags */ -#define FD_NEED_TWADDLE (1 << FD_NEED_TWADDLE_BIT) -#define FD_VERIFY (1 << FD_VERIFY_BIT) -#define FD_DISK_NEWCHANGE (1 << FD_DISK_NEWCHANGE_BIT) -#define FD_DISK_CHANGED (1 << FD_DISK_CHANGED_BIT) -#define FD_DISK_WRITABLE (1 << FD_DISK_WRITABLE_BIT) - - unsigned long spinup_date; - unsigned long select_date; - unsigned long first_read_date; - short probed_format; - short track; /* current track */ - short maxblock; /* id of highest block read */ - short maxtrack; /* id of highest half track read */ - int generation; /* how many diskchanges? */ - -/* - * (User-provided) media information is _not_ discarded after a media change - * if the corresponding keep_data flag is non-zero. Positive values are - * decremented after each probe. - */ - int keep_data; - - /* Prevent "aliased" accesses. */ - int fd_ref; - int fd_device; - unsigned long last_checked; /* when was the drive last checked for a disk - * change? */ - - char *dmabuf; - int bufblocks; -}; - -#define FDGETDRVSTAT _IOR(2, 0x12, struct floppy_drive_struct) -#define FDPOLLDRVSTAT _IOR(2, 0x13, struct floppy_drive_struct) -/* get drive state: GET returns the cached state, POLL polls for new state */ - - -/* - * reset FDC - */ -enum reset_mode { - FD_RESET_IF_NEEDED, /* reset only if the reset flags is set */ - FD_RESET_IF_RAWCMD, /* obsolete */ - FD_RESET_ALWAYS /* reset always */ -}; -#define FDRESET _IO(2, 0x54) - - -/* - * FDC state - */ -struct floppy_fdc_state { - int spec1; /* spec1 value last used */ - int spec2; /* spec2 value last used */ - int dtr; - unsigned char version; /* FDC version code */ - unsigned char dor; - unsigned long address; /* io address */ - unsigned int rawcmd:2; - unsigned int reset:1; - unsigned int need_configure:1; - unsigned int perp_mode:2; - unsigned int has_fifo:1; - unsigned int driver_version; /* version code for floppy driver */ -#define FD_DRIVER_VERSION 0x100 -/* user programs using the floppy API should use floppy_fdc_state to - * get the version number of the floppy driver that they are running - * on. If this version number is bigger than the one compiled into the - * user program (the FD_DRIVER_VERSION define), it should be prepared - * to bigger structures - */ - - unsigned char track[4]; - /* Position of the heads of the 4 units attached to this FDC, - * as stored on the FDC. In the future, the position as stored - * on the FDC might not agree with the actual physical - * position of these drive heads. By allowing such - * disagreement, it will be possible to reset the FDC without - * incurring the expensive cost of repositioning all heads. - * Right now, these positions are hard wired to 0. */ - -}; - -#define FDGETFDCSTAT _IOR(2, 0x15, struct floppy_fdc_state) - - -/* - * Asynchronous Write error tracking - */ -struct floppy_write_errors { - /* Write error logging. - * - * These fields can be cleared with the FDWERRORCLR ioctl. - * Only writes that were attempted but failed due to a physical media - * error are logged. write(2) calls that fail and return an error code - * to the user process are not counted. - */ - - unsigned int write_errors; /* number of physical write errors - * encountered */ - - /* position of first and last write errors */ - unsigned long first_error_sector; - int first_error_generation; - unsigned long last_error_sector; - int last_error_generation; - - unsigned int badness; /* highest retry count for a read or write - * operation */ -}; - -#define FDWERRORCLR _IO(2, 0x56) -/* clear write error and badness information */ -#define FDWERRORGET _IOR(2, 0x17, struct floppy_write_errors) -/* get write error and badness information */ - - -/* - * Raw commands - */ -/* new interface flag: now we can do them in batches */ -#define FDHAVEBATCHEDRAWCMD - -struct floppy_raw_cmd { - unsigned int flags; -#define FD_RAW_READ 1 -#define FD_RAW_WRITE 2 -#define FD_RAW_NO_MOTOR 4 -#define FD_RAW_DISK_CHANGE 4 /* out: disk change flag was set */ -#define FD_RAW_INTR 8 /* wait for an interrupt */ -#define FD_RAW_SPIN 0x10 /* spin up the disk for this command */ -#define FD_RAW_NO_MOTOR_AFTER 0x20 /* switch the motor off after command - * completion */ -#define FD_RAW_NEED_DISK 0x40 /* this command needs a disk to be present */ -#define FD_RAW_NEED_SEEK 0x80 /* this command uses an implied seek (soft) */ - -/* more "in" flags */ -#define FD_RAW_MORE 0x100 /* more records follow */ -#define FD_RAW_STOP_IF_FAILURE 0x200 /* stop if we encounter a failure */ -#define FD_RAW_STOP_IF_SUCCESS 0x400 /* stop if command successful */ -#define FD_RAW_SOFTFAILURE 0x800 /* consider the return value for failure - * detection too */ - -/* more "out" flags */ -#define FD_RAW_FAILURE 0x10000 /* command sent to fdc, fdc returned error */ -#define FD_RAW_HARDFAILURE 0x20000 /* fdc had to be reset, or timed out */ - - void __user *data; - char *kernel_data; /* location of data buffer in the kernel */ - struct floppy_raw_cmd *next; /* used for chaining of raw cmd's - * within the kernel */ - long length; /* in: length of dma transfer. out: remaining bytes */ - long phys_length; /* physical length, if different from dma length */ - int buffer_length; /* length of allocated buffer */ - - unsigned char rate; - unsigned char cmd_count; - unsigned char cmd[16]; - unsigned char reply_count; - unsigned char reply[16]; - int track; - int resultcode; - - int reserved1; - int reserved2; -}; - -#define FDRAWCMD _IO(2, 0x58) -/* send a raw command to the fdc. Structure size not included, because of - * batches */ - -#define FDTWADDLE _IO(2, 0x59) -/* flicker motor-on bit before reading a sector. Experimental */ - - -#define FDEJECT _IO(2, 0x5a) -/* eject the disk */ - - -#ifdef __KERNEL__ #ifdef CONFIG_COMPAT #include <linux/compat.h> @@ -398,5 +22,3 @@ struct compat_floppy_struct { #define FDGETPRM32 _IOR(2, 0x04, struct compat_floppy_struct) #endif #endif - -#endif diff --git a/include/linux/filter.h b/include/linux/filter.h index 2ded090e10f4..24d251f3bab0 100644 --- a/include/linux/filter.h +++ b/include/linux/filter.h @@ -1,141 +1,12 @@ /* * Linux Socket Filter Data Structures */ - #ifndef __LINUX_FILTER_H__ #define __LINUX_FILTER_H__ -#include <linux/compiler.h> -#include <linux/types.h> - -#ifdef __KERNEL__ #include <linux/atomic.h> #include <linux/compat.h> -#endif - -/* - * Current version of the filter code architecture. - */ -#define BPF_MAJOR_VERSION 1 -#define BPF_MINOR_VERSION 1 - -/* - * Try and keep these values and structures similar to BSD, especially - * the BPF code definitions which need to match so you can share filters - */ - -struct sock_filter { /* Filter block */ - __u16 code; /* Actual filter code */ - __u8 jt; /* Jump true */ - __u8 jf; /* Jump false */ - __u32 k; /* Generic multiuse field */ -}; - -struct sock_fprog { /* Required for SO_ATTACH_FILTER. */ - unsigned short len; /* Number of filter blocks */ - struct sock_filter __user *filter; -}; - -/* - * Instruction classes - */ - -#define BPF_CLASS(code) ((code) & 0x07) -#define BPF_LD 0x00 -#define BPF_LDX 0x01 -#define BPF_ST 0x02 -#define BPF_STX 0x03 -#define BPF_ALU 0x04 -#define BPF_JMP 0x05 -#define BPF_RET 0x06 -#define BPF_MISC 0x07 - -/* ld/ldx fields */ -#define BPF_SIZE(code) ((code) & 0x18) -#define BPF_W 0x00 -#define BPF_H 0x08 -#define BPF_B 0x10 -#define BPF_MODE(code) ((code) & 0xe0) -#define BPF_IMM 0x00 -#define BPF_ABS 0x20 -#define BPF_IND 0x40 -#define BPF_MEM 0x60 -#define BPF_LEN 0x80 -#define BPF_MSH 0xa0 - -/* alu/jmp fields */ -#define BPF_OP(code) ((code) & 0xf0) -#define BPF_ADD 0x00 -#define BPF_SUB 0x10 -#define BPF_MUL 0x20 -#define BPF_DIV 0x30 -#define BPF_OR 0x40 -#define BPF_AND 0x50 -#define BPF_LSH 0x60 -#define BPF_RSH 0x70 -#define BPF_NEG 0x80 -#define BPF_MOD 0x90 -#define BPF_XOR 0xa0 - -#define BPF_JA 0x00 -#define BPF_JEQ 0x10 -#define BPF_JGT 0x20 -#define BPF_JGE 0x30 -#define BPF_JSET 0x40 -#define BPF_SRC(code) ((code) & 0x08) -#define BPF_K 0x00 -#define BPF_X 0x08 - -/* ret - BPF_K and BPF_X also apply */ -#define BPF_RVAL(code) ((code) & 0x18) -#define BPF_A 0x10 - -/* misc */ -#define BPF_MISCOP(code) ((code) & 0xf8) -#define BPF_TAX 0x00 -#define BPF_TXA 0x80 - -#ifndef BPF_MAXINSNS -#define BPF_MAXINSNS 4096 -#endif - -/* - * Macros for filter block array initializers. - */ -#ifndef BPF_STMT -#define BPF_STMT(code, k) { (unsigned short)(code), 0, 0, k } -#endif -#ifndef BPF_JUMP -#define BPF_JUMP(code, k, jt, jf) { (unsigned short)(code), jt, jf, k } -#endif - -/* - * Number of scratch memory words for: BPF_ST and BPF_STX - */ -#define BPF_MEMWORDS 16 - -/* RATIONALE. Negative offsets are invalid in BPF. - We use them to reference ancillary data. - Unlike introduction new instructions, it does not break - existing compilers/optimizers. - */ -#define SKF_AD_OFF (-0x1000) -#define SKF_AD_PROTOCOL 0 -#define SKF_AD_PKTTYPE 4 -#define SKF_AD_IFINDEX 8 -#define SKF_AD_NLATTR 12 -#define SKF_AD_NLATTR_NEST 16 -#define SKF_AD_MARK 20 -#define SKF_AD_QUEUE 24 -#define SKF_AD_HATYPE 28 -#define SKF_AD_RXHASH 32 -#define SKF_AD_CPU 36 -#define SKF_AD_ALU_XOR_X 40 -#define SKF_AD_MAX 44 -#define SKF_NET_OFF (-0x100000) -#define SKF_LL_OFF (-0x200000) - -#ifdef __KERNEL__ +#include <uapi/linux/filter.h> #ifdef CONFIG_COMPAT /* @@ -254,6 +125,4 @@ enum { BPF_S_ANC_SECCOMP_LD_W, }; -#endif /* __KERNEL__ */ - #endif /* __LINUX_FILTER_H__ */ diff --git a/include/linux/flat.h b/include/linux/flat.h index ec56852e2659..2c1eb15c4ba4 100644 --- a/include/linux/flat.h +++ b/include/linux/flat.h @@ -6,58 +6,12 @@ * This file provides the definitions and structures needed to * support uClinux flat-format executables. */ - #ifndef _LINUX_FLAT_H #define _LINUX_FLAT_H -#ifdef __KERNEL__ #include <asm/flat.h> -#endif - -#define FLAT_VERSION 0x00000004L - -#ifdef CONFIG_BINFMT_SHARED_FLAT -#define MAX_SHARED_LIBS (4) -#else -#define MAX_SHARED_LIBS (1) -#endif - -/* - * To make everything easier to port and manage cross platform - * development, all fields are in network byte order. - */ +#include <uapi/linux/flat.h> -struct flat_hdr { - char magic[4]; - unsigned long rev; /* version (as above) */ - unsigned long entry; /* Offset of first executable instruction - with text segment from beginning of file */ - unsigned long data_start; /* Offset of data segment from beginning of - file */ - unsigned long data_end; /* Offset of end of data segment - from beginning of file */ - unsigned long bss_end; /* Offset of end of bss segment from beginning - of file */ - - /* (It is assumed that data_end through bss_end forms the bss segment.) */ - - unsigned long stack_size; /* Size of stack, in bytes */ - unsigned long reloc_start; /* Offset of relocation records from - beginning of file */ - unsigned long reloc_count; /* Number of relocation records */ - unsigned long flags; - unsigned long build_date; /* When the program/library was built */ - unsigned long filler[5]; /* Reservered, set to zero */ -}; - -#define FLAT_FLAG_RAM 0x0001 /* load program entirely into RAM */ -#define FLAT_FLAG_GOTPIC 0x0002 /* program is PIC with GOT */ -#define FLAT_FLAG_GZIP 0x0004 /* all but the header is compressed */ -#define FLAT_FLAG_GZDATA 0x0008 /* only data/relocs are compressed (for XIP) */ -#define FLAT_FLAG_KTRACE 0x0010 /* output useful kernel trace for debugging */ - - -#ifdef __KERNEL__ /* so systems without linux headers can compile the apps */ /* * While it would be nice to keep this header clean, users of older * tools still need this support in the kernel. So this section is @@ -95,6 +49,4 @@ typedef union { } reloc; } flat_v2_reloc_t; -#endif /* __KERNEL__ */ - #endif /* _LINUX_FLAT_H */ diff --git a/include/linux/fs.h b/include/linux/fs.h index 8cb86cfc9719..001c7cff2d48 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -1,337 +1,6 @@ #ifndef _LINUX_FS_H #define _LINUX_FS_H -/* - * This file has definitions for some important file table - * structures etc. - */ - -#include <linux/limits.h> -#include <linux/ioctl.h> -#include <linux/types.h> - -/* - * It's silly to have NR_OPEN bigger than NR_FILE, but you can change - * the file limit at runtime and only root can increase the per-process - * nr_file rlimit, so it's safe to set up a ridiculously high absolute - * upper limit on files-per-process. - * - * Some programs (notably those using select()) may have to be - * recompiled to take full advantage of the new limits.. - */ - -/* Fixed constants first: */ -#undef NR_OPEN -#define INR_OPEN_CUR 1024 /* Initial setting for nfile rlimits */ -#define INR_OPEN_MAX 4096 /* Hard limit for nfile rlimits */ - -#define BLOCK_SIZE_BITS 10 -#define BLOCK_SIZE (1<<BLOCK_SIZE_BITS) - -#define SEEK_SET 0 /* seek relative to beginning of file */ -#define SEEK_CUR 1 /* seek relative to current file position */ -#define SEEK_END 2 /* seek relative to end of file */ -#define SEEK_DATA 3 /* seek to the next data */ -#define SEEK_HOLE 4 /* seek to the next hole */ -#define SEEK_MAX SEEK_HOLE - -struct fstrim_range { - __u64 start; - __u64 len; - __u64 minlen; -}; - -/* And dynamically-tunable limits and defaults: */ -struct files_stat_struct { - unsigned long nr_files; /* read only */ - unsigned long nr_free_files; /* read only */ - unsigned long max_files; /* tunable */ -}; - -struct inodes_stat_t { - int nr_inodes; - int nr_unused; - int dummy[5]; /* padding for sysctl ABI compatibility */ -}; - - -#define NR_FILE 8192 /* this can well be larger on a larger system */ - -#define MAY_EXEC 0x00000001 -#define MAY_WRITE 0x00000002 -#define MAY_READ 0x00000004 -#define MAY_APPEND 0x00000008 -#define MAY_ACCESS 0x00000010 -#define MAY_OPEN 0x00000020 -#define MAY_CHDIR 0x00000040 -/* called from RCU mode, don't block */ -#define MAY_NOT_BLOCK 0x00000080 - -/* - * flags in file.f_mode. Note that FMODE_READ and FMODE_WRITE must correspond - * to O_WRONLY and O_RDWR via the strange trick in __dentry_open() - */ - -/* file is open for reading */ -#define FMODE_READ ((__force fmode_t)0x1) -/* file is open for writing */ -#define FMODE_WRITE ((__force fmode_t)0x2) -/* file is seekable */ -#define FMODE_LSEEK ((__force fmode_t)0x4) -/* file can be accessed using pread */ -#define FMODE_PREAD ((__force fmode_t)0x8) -/* file can be accessed using pwrite */ -#define FMODE_PWRITE ((__force fmode_t)0x10) -/* File is opened for execution with sys_execve / sys_uselib */ -#define FMODE_EXEC ((__force fmode_t)0x20) -/* File is opened with O_NDELAY (only set for block devices) */ -#define FMODE_NDELAY ((__force fmode_t)0x40) -/* File is opened with O_EXCL (only set for block devices) */ -#define FMODE_EXCL ((__force fmode_t)0x80) -/* File is opened using open(.., 3, ..) and is writeable only for ioctls - (specialy hack for floppy.c) */ -#define FMODE_WRITE_IOCTL ((__force fmode_t)0x100) -/* 32bit hashes as llseek() offset (for directories) */ -#define FMODE_32BITHASH ((__force fmode_t)0x200) -/* 64bit hashes as llseek() offset (for directories) */ -#define FMODE_64BITHASH ((__force fmode_t)0x400) - -/* - * Don't update ctime and mtime. - * - * Currently a special hack for the XFS open_by_handle ioctl, but we'll - * hopefully graduate it to a proper O_CMTIME flag supported by open(2) soon. - */ -#define FMODE_NOCMTIME ((__force fmode_t)0x800) - -/* Expect random access pattern */ -#define FMODE_RANDOM ((__force fmode_t)0x1000) - -/* File is huge (eg. /dev/kmem): treat loff_t as unsigned */ -#define FMODE_UNSIGNED_OFFSET ((__force fmode_t)0x2000) - -/* File is opened with O_PATH; almost nothing can be done with it */ -#define FMODE_PATH ((__force fmode_t)0x4000) - -/* File was opened by fanotify and shouldn't generate fanotify events */ -#define FMODE_NONOTIFY ((__force fmode_t)0x1000000) - -/* - * Flag for rw_copy_check_uvector and compat_rw_copy_check_uvector - * that indicates that they should check the contents of the iovec are - * valid, but not check the memory that the iovec elements - * points too. - */ -#define CHECK_IOVEC_ONLY -1 - -#define SEL_IN 1 -#define SEL_OUT 2 -#define SEL_EX 4 - -/* public flags for file_system_type */ -#define FS_REQUIRES_DEV 1 -#define FS_BINARY_MOUNTDATA 2 -#define FS_HAS_SUBTYPE 4 -#define FS_REVAL_DOT 16384 /* Check the paths ".", ".." for staleness */ -#define FS_RENAME_DOES_D_MOVE 32768 /* FS will handle d_move() - * during rename() internally. - */ - -/* - * These are the fs-independent mount-flags: up to 32 flags are supported - */ -#define MS_RDONLY 1 /* Mount read-only */ -#define MS_NOSUID 2 /* Ignore suid and sgid bits */ -#define MS_NODEV 4 /* Disallow access to device special files */ -#define MS_NOEXEC 8 /* Disallow program execution */ -#define MS_SYNCHRONOUS 16 /* Writes are synced at once */ -#define MS_REMOUNT 32 /* Alter flags of a mounted FS */ -#define MS_MANDLOCK 64 /* Allow mandatory locks on an FS */ -#define MS_DIRSYNC 128 /* Directory modifications are synchronous */ -#define MS_NOATIME 1024 /* Do not update access times. */ -#define MS_NODIRATIME 2048 /* Do not update directory access times */ -#define MS_BIND 4096 -#define MS_MOVE 8192 -#define MS_REC 16384 -#define MS_VERBOSE 32768 /* War is peace. Verbosity is silence. - MS_VERBOSE is deprecated. */ -#define MS_SILENT 32768 -#define MS_POSIXACL (1<<16) /* VFS does not apply the umask */ -#define MS_UNBINDABLE (1<<17) /* change to unbindable */ -#define MS_PRIVATE (1<<18) /* change to private */ -#define MS_SLAVE (1<<19) /* change to slave */ -#define MS_SHARED (1<<20) /* change to shared */ -#define MS_RELATIME (1<<21) /* Update atime relative to mtime/ctime. */ -#define MS_KERNMOUNT (1<<22) /* this is a kern_mount call */ -#define MS_I_VERSION (1<<23) /* Update inode I_version field */ -#define MS_STRICTATIME (1<<24) /* Always perform atime updates */ -#define MS_NOSEC (1<<28) -#define MS_BORN (1<<29) -#define MS_ACTIVE (1<<30) -#define MS_NOUSER (1<<31) - -/* - * Superblock flags that can be altered by MS_REMOUNT - */ -#define MS_RMT_MASK (MS_RDONLY|MS_SYNCHRONOUS|MS_MANDLOCK|MS_I_VERSION) - -/* - * Old magic mount flag and mask - */ -#define MS_MGC_VAL 0xC0ED0000 -#define MS_MGC_MSK 0xffff0000 - -/* Inode flags - they have nothing to superblock flags now */ - -#define S_SYNC 1 /* Writes are synced at once */ -#define S_NOATIME 2 /* Do not update access times */ -#define S_APPEND 4 /* Append-only file */ -#define S_IMMUTABLE 8 /* Immutable file */ -#define S_DEAD 16 /* removed, but still open directory */ -#define S_NOQUOTA 32 /* Inode is not counted to quota */ -#define S_DIRSYNC 64 /* Directory modifications are synchronous */ -#define S_NOCMTIME 128 /* Do not update file c/mtime */ -#define S_SWAPFILE 256 /* Do not truncate: swapon got its bmaps */ -#define S_PRIVATE 512 /* Inode is fs-internal */ -#define S_IMA 1024 /* Inode has an associated IMA struct */ -#define S_AUTOMOUNT 2048 /* Automount/referral quasi-directory */ -#define S_NOSEC 4096 /* no suid or xattr security attributes */ - -/* - * Note that nosuid etc flags are inode-specific: setting some file-system - * flags just means all the inodes inherit those flags by default. It might be - * possible to override it selectively if you really wanted to with some - * ioctl() that is not currently implemented. - * - * Exception: MS_RDONLY is always applied to the entire file system. - * - * Unfortunately, it is possible to change a filesystems flags with it mounted - * with files in use. This means that all of the inodes will not have their - * i_flags updated. Hence, i_flags no longer inherit the superblock mount - * flags, so these have to be checked separately. -- rmk@arm.uk.linux.org - */ -#define __IS_FLG(inode,flg) ((inode)->i_sb->s_flags & (flg)) - -#define IS_RDONLY(inode) ((inode)->i_sb->s_flags & MS_RDONLY) -#define IS_SYNC(inode) (__IS_FLG(inode, MS_SYNCHRONOUS) || \ - ((inode)->i_flags & S_SYNC)) -#define IS_DIRSYNC(inode) (__IS_FLG(inode, MS_SYNCHRONOUS|MS_DIRSYNC) || \ - ((inode)->i_flags & (S_SYNC|S_DIRSYNC))) -#define IS_MANDLOCK(inode) __IS_FLG(inode, MS_MANDLOCK) -#define IS_NOATIME(inode) __IS_FLG(inode, MS_RDONLY|MS_NOATIME) -#define IS_I_VERSION(inode) __IS_FLG(inode, MS_I_VERSION) - -#define IS_NOQUOTA(inode) ((inode)->i_flags & S_NOQUOTA) -#define IS_APPEND(inode) ((inode)->i_flags & S_APPEND) -#define IS_IMMUTABLE(inode) ((inode)->i_flags & S_IMMUTABLE) -#define IS_POSIXACL(inode) __IS_FLG(inode, MS_POSIXACL) - -#define IS_DEADDIR(inode) ((inode)->i_flags & S_DEAD) -#define IS_NOCMTIME(inode) ((inode)->i_flags & S_NOCMTIME) -#define IS_SWAPFILE(inode) ((inode)->i_flags & S_SWAPFILE) -#define IS_PRIVATE(inode) ((inode)->i_flags & S_PRIVATE) -#define IS_IMA(inode) ((inode)->i_flags & S_IMA) -#define IS_AUTOMOUNT(inode) ((inode)->i_flags & S_AUTOMOUNT) -#define IS_NOSEC(inode) ((inode)->i_flags & S_NOSEC) - -/* the read-only stuff doesn't really belong here, but any other place is - probably as bad and I don't want to create yet another include file. */ - -#define BLKROSET _IO(0x12,93) /* set device read-only (0 = read-write) */ -#define BLKROGET _IO(0x12,94) /* get read-only status (0 = read_write) */ -#define BLKRRPART _IO(0x12,95) /* re-read partition table */ -#define BLKGETSIZE _IO(0x12,96) /* return device size /512 (long *arg) */ -#define BLKFLSBUF _IO(0x12,97) /* flush buffer cache */ -#define BLKRASET _IO(0x12,98) /* set read ahead for block device */ -#define BLKRAGET _IO(0x12,99) /* get current read ahead setting */ -#define BLKFRASET _IO(0x12,100)/* set filesystem (mm/filemap.c) read-ahead */ -#define BLKFRAGET _IO(0x12,101)/* get filesystem (mm/filemap.c) read-ahead */ -#define BLKSECTSET _IO(0x12,102)/* set max sectors per request (ll_rw_blk.c) */ -#define BLKSECTGET _IO(0x12,103)/* get max sectors per request (ll_rw_blk.c) */ -#define BLKSSZGET _IO(0x12,104)/* get block device sector size */ -#if 0 -#define BLKPG _IO(0x12,105)/* See blkpg.h */ - -/* Some people are morons. Do not use sizeof! */ - -#define BLKELVGET _IOR(0x12,106,size_t)/* elevator get */ -#define BLKELVSET _IOW(0x12,107,size_t)/* elevator set */ -/* This was here just to show that the number is taken - - probably all these _IO(0x12,*) ioctls should be moved to blkpg.h. */ -#endif -/* A jump here: 108-111 have been used for various private purposes. */ -#define BLKBSZGET _IOR(0x12,112,size_t) -#define BLKBSZSET _IOW(0x12,113,size_t) -#define BLKGETSIZE64 _IOR(0x12,114,size_t) /* return device size in bytes (u64 *arg) */ -#define BLKTRACESETUP _IOWR(0x12,115,struct blk_user_trace_setup) -#define BLKTRACESTART _IO(0x12,116) -#define BLKTRACESTOP _IO(0x12,117) -#define BLKTRACETEARDOWN _IO(0x12,118) -#define BLKDISCARD _IO(0x12,119) -#define BLKIOMIN _IO(0x12,120) -#define BLKIOOPT _IO(0x12,121) -#define BLKALIGNOFF _IO(0x12,122) -#define BLKPBSZGET _IO(0x12,123) -#define BLKDISCARDZEROES _IO(0x12,124) -#define BLKSECDISCARD _IO(0x12,125) -#define BLKROTATIONAL _IO(0x12,126) -#define BLKZEROOUT _IO(0x12,127) - -#define BMAP_IOCTL 1 /* obsolete - kept for compatibility */ -#define FIBMAP _IO(0x00,1) /* bmap access */ -#define FIGETBSZ _IO(0x00,2) /* get the block size used for bmap */ -#define FIFREEZE _IOWR('X', 119, int) /* Freeze */ -#define FITHAW _IOWR('X', 120, int) /* Thaw */ -#define FITRIM _IOWR('X', 121, struct fstrim_range) /* Trim */ - -#define FS_IOC_GETFLAGS _IOR('f', 1, long) -#define FS_IOC_SETFLAGS _IOW('f', 2, long) -#define FS_IOC_GETVERSION _IOR('v', 1, long) -#define FS_IOC_SETVERSION _IOW('v', 2, long) -#define FS_IOC_FIEMAP _IOWR('f', 11, struct fiemap) -#define FS_IOC32_GETFLAGS _IOR('f', 1, int) -#define FS_IOC32_SETFLAGS _IOW('f', 2, int) -#define FS_IOC32_GETVERSION _IOR('v', 1, int) -#define FS_IOC32_SETVERSION _IOW('v', 2, int) - -/* - * Inode flags (FS_IOC_GETFLAGS / FS_IOC_SETFLAGS) - */ -#define FS_SECRM_FL 0x00000001 /* Secure deletion */ -#define FS_UNRM_FL 0x00000002 /* Undelete */ -#define FS_COMPR_FL 0x00000004 /* Compress file */ -#define FS_SYNC_FL 0x00000008 /* Synchronous updates */ -#define FS_IMMUTABLE_FL 0x00000010 /* Immutable file */ -#define FS_APPEND_FL 0x00000020 /* writes to file may only append */ -#define FS_NODUMP_FL 0x00000040 /* do not dump file */ -#define FS_NOATIME_FL 0x00000080 /* do not update atime */ -/* Reserved for compression usage... */ -#define FS_DIRTY_FL 0x00000100 -#define FS_COMPRBLK_FL 0x00000200 /* One or more compressed clusters */ -#define FS_NOCOMP_FL 0x00000400 /* Don't compress */ -#define FS_ECOMPR_FL 0x00000800 /* Compression error */ -/* End compression flags --- maybe not all used */ -#define FS_BTREE_FL 0x00001000 /* btree format dir */ -#define FS_INDEX_FL 0x00001000 /* hash-indexed directory */ -#define FS_IMAGIC_FL 0x00002000 /* AFS directory */ -#define FS_JOURNAL_DATA_FL 0x00004000 /* Reserved for ext3 */ -#define FS_NOTAIL_FL 0x00008000 /* file tail should not be merged */ -#define FS_DIRSYNC_FL 0x00010000 /* dirsync behaviour (directories only) */ -#define FS_TOPDIR_FL 0x00020000 /* Top of directory hierarchies*/ -#define FS_EXTENT_FL 0x00080000 /* Extents */ -#define FS_DIRECTIO_FL 0x00100000 /* Use direct i/o */ -#define FS_NOCOW_FL 0x00800000 /* Do not cow file */ -#define FS_RESERVED_FL 0x80000000 /* reserved for ext2 lib */ - -#define FS_FL_USER_VISIBLE 0x0003DFFF /* User visible flags */ -#define FS_FL_USER_MODIFIABLE 0x000380FF /* User modifiable flags */ - - -#define SYNC_FILE_RANGE_WAIT_BEFORE 1 -#define SYNC_FILE_RANGE_WRITE 2 -#define SYNC_FILE_RANGE_WAIT_AFTER 4 - -#ifdef __KERNEL__ #include <linux/linkage.h> #include <linux/wait.h> @@ -360,6 +29,7 @@ struct inodes_stat_t { #include <linux/blk_types.h> #include <asm/byteorder.h> +#include <uapi/linux/fs.h> struct export_operations; struct hd_geometry; @@ -2876,5 +2546,4 @@ static inline void inode_has_no_xattr(struct inode *inode) inode->i_flags |= S_NOSEC; } -#endif /* __KERNEL__ */ #endif /* _LINUX_FS_H */ diff --git a/include/linux/fsl_hypervisor.h b/include/linux/fsl_hypervisor.h index 1cebaeeeef57..2a707d7fb32c 100644 --- a/include/linux/fsl_hypervisor.h +++ b/include/linux/fsl_hypervisor.h @@ -36,187 +36,11 @@ * also be included by applications that need to communicate with the driver * via the ioctl interface. */ - #ifndef FSL_HYPERVISOR_H #define FSL_HYPERVISOR_H -#include <linux/types.h> - -/** - * struct fsl_hv_ioctl_restart - restart a partition - * @ret: return error code from the hypervisor - * @partition: the ID of the partition to restart, or -1 for the - * calling partition - * - * Used by FSL_HV_IOCTL_PARTITION_RESTART - */ -struct fsl_hv_ioctl_restart { - __u32 ret; - __u32 partition; -}; +#include <uapi/linux/fsl_hypervisor.h> -/** - * struct fsl_hv_ioctl_status - get a partition's status - * @ret: return error code from the hypervisor - * @partition: the ID of the partition to query, or -1 for the - * calling partition - * @status: The returned status of the partition - * - * Used by FSL_HV_IOCTL_PARTITION_GET_STATUS - * - * Values of 'status': - * 0 = Stopped - * 1 = Running - * 2 = Starting - * 3 = Stopping - */ -struct fsl_hv_ioctl_status { - __u32 ret; - __u32 partition; - __u32 status; -}; - -/** - * struct fsl_hv_ioctl_start - start a partition - * @ret: return error code from the hypervisor - * @partition: the ID of the partition to control - * @entry_point: The offset within the guest IMA to start execution - * @load: If non-zero, reload the partition's images before starting - * - * Used by FSL_HV_IOCTL_PARTITION_START - */ -struct fsl_hv_ioctl_start { - __u32 ret; - __u32 partition; - __u32 entry_point; - __u32 load; -}; - -/** - * struct fsl_hv_ioctl_stop - stop a partition - * @ret: return error code from the hypervisor - * @partition: the ID of the partition to stop, or -1 for the calling - * partition - * - * Used by FSL_HV_IOCTL_PARTITION_STOP - */ -struct fsl_hv_ioctl_stop { - __u32 ret; - __u32 partition; -}; - -/** - * struct fsl_hv_ioctl_memcpy - copy memory between partitions - * @ret: return error code from the hypervisor - * @source: the partition ID of the source partition, or -1 for this - * partition - * @target: the partition ID of the target partition, or -1 for this - * partition - * @reserved: reserved, must be set to 0 - * @local_addr: user-space virtual address of a buffer in the local - * partition - * @remote_addr: guest physical address of a buffer in the - * remote partition - * @count: the number of bytes to copy. Both the local and remote - * buffers must be at least 'count' bytes long - * - * Used by FSL_HV_IOCTL_MEMCPY - * - * The 'local' partition is the partition that calls this ioctl. The - * 'remote' partition is a different partition. The data is copied from - * the 'source' paritition' to the 'target' partition. - * - * The buffer in the remote partition must be guest physically - * contiguous. - * - * This ioctl does not support copying memory between two remote - * partitions or within the same partition, so either 'source' or - * 'target' (but not both) must be -1. In other words, either - * - * source == local and target == remote - * or - * source == remote and target == local - */ -struct fsl_hv_ioctl_memcpy { - __u32 ret; - __u32 source; - __u32 target; - __u32 reserved; /* padding to ensure local_vaddr is aligned */ - __u64 local_vaddr; - __u64 remote_paddr; - __u64 count; -}; - -/** - * struct fsl_hv_ioctl_doorbell - ring a doorbell - * @ret: return error code from the hypervisor - * @doorbell: the handle of the doorbell to ring doorbell - * - * Used by FSL_HV_IOCTL_DOORBELL - */ -struct fsl_hv_ioctl_doorbell { - __u32 ret; - __u32 doorbell; -}; - -/** - * struct fsl_hv_ioctl_prop - get/set a device tree property - * @ret: return error code from the hypervisor - * @handle: handle of partition whose tree to access - * @path: virtual address of path name of node to access - * @propname: virtual address of name of property to access - * @propval: virtual address of property data buffer - * @proplen: Size of property data buffer - * @reserved: reserved, must be set to 0 - * - * Used by FSL_HV_IOCTL_DOORBELL - */ -struct fsl_hv_ioctl_prop { - __u32 ret; - __u32 handle; - __u64 path; - __u64 propname; - __u64 propval; - __u32 proplen; - __u32 reserved; /* padding to ensure structure is aligned */ -}; - -/* The ioctl type, documented in ioctl-number.txt */ -#define FSL_HV_IOCTL_TYPE 0xAF - -/* Restart another partition */ -#define FSL_HV_IOCTL_PARTITION_RESTART \ - _IOWR(FSL_HV_IOCTL_TYPE, 1, struct fsl_hv_ioctl_restart) - -/* Get a partition's status */ -#define FSL_HV_IOCTL_PARTITION_GET_STATUS \ - _IOWR(FSL_HV_IOCTL_TYPE, 2, struct fsl_hv_ioctl_status) - -/* Boot another partition */ -#define FSL_HV_IOCTL_PARTITION_START \ - _IOWR(FSL_HV_IOCTL_TYPE, 3, struct fsl_hv_ioctl_start) - -/* Stop this or another partition */ -#define FSL_HV_IOCTL_PARTITION_STOP \ - _IOWR(FSL_HV_IOCTL_TYPE, 4, struct fsl_hv_ioctl_stop) - -/* Copy data from one partition to another */ -#define FSL_HV_IOCTL_MEMCPY \ - _IOWR(FSL_HV_IOCTL_TYPE, 5, struct fsl_hv_ioctl_memcpy) - -/* Ring a doorbell */ -#define FSL_HV_IOCTL_DOORBELL \ - _IOWR(FSL_HV_IOCTL_TYPE, 6, struct fsl_hv_ioctl_doorbell) - -/* Get a property from another guest's device tree */ -#define FSL_HV_IOCTL_GETPROP \ - _IOWR(FSL_HV_IOCTL_TYPE, 7, struct fsl_hv_ioctl_prop) - -/* Set a property in another guest's device tree */ -#define FSL_HV_IOCTL_SETPROP \ - _IOWR(FSL_HV_IOCTL_TYPE, 8, struct fsl_hv_ioctl_prop) - -#ifdef __KERNEL__ /** * fsl_hv_event_register() - register a callback for failover events @@ -237,5 +61,3 @@ int fsl_hv_failover_register(struct notifier_block *nb); int fsl_hv_failover_unregister(struct notifier_block *nb); #endif - -#endif diff --git a/include/linux/futex.h b/include/linux/futex.h index 1e5a26d79232..b0d95cac826e 100644 --- a/include/linux/futex.h +++ b/include/linux/futex.h @@ -1,129 +1,8 @@ #ifndef _LINUX_FUTEX_H #define _LINUX_FUTEX_H -#include <linux/compiler.h> -#include <linux/types.h> +#include <uapi/linux/futex.h> -/* Second argument to futex syscall */ - - -#define FUTEX_WAIT 0 -#define FUTEX_WAKE 1 -#define FUTEX_FD 2 -#define FUTEX_REQUEUE 3 -#define FUTEX_CMP_REQUEUE 4 -#define FUTEX_WAKE_OP 5 -#define FUTEX_LOCK_PI 6 -#define FUTEX_UNLOCK_PI 7 -#define FUTEX_TRYLOCK_PI 8 -#define FUTEX_WAIT_BITSET 9 -#define FUTEX_WAKE_BITSET 10 -#define FUTEX_WAIT_REQUEUE_PI 11 -#define FUTEX_CMP_REQUEUE_PI 12 - -#define FUTEX_PRIVATE_FLAG 128 -#define FUTEX_CLOCK_REALTIME 256 -#define FUTEX_CMD_MASK ~(FUTEX_PRIVATE_FLAG | FUTEX_CLOCK_REALTIME) - -#define FUTEX_WAIT_PRIVATE (FUTEX_WAIT | FUTEX_PRIVATE_FLAG) -#define FUTEX_WAKE_PRIVATE (FUTEX_WAKE | FUTEX_PRIVATE_FLAG) -#define FUTEX_REQUEUE_PRIVATE (FUTEX_REQUEUE | FUTEX_PRIVATE_FLAG) -#define FUTEX_CMP_REQUEUE_PRIVATE (FUTEX_CMP_REQUEUE | FUTEX_PRIVATE_FLAG) -#define FUTEX_WAKE_OP_PRIVATE (FUTEX_WAKE_OP | FUTEX_PRIVATE_FLAG) -#define FUTEX_LOCK_PI_PRIVATE (FUTEX_LOCK_PI | FUTEX_PRIVATE_FLAG) -#define FUTEX_UNLOCK_PI_PRIVATE (FUTEX_UNLOCK_PI | FUTEX_PRIVATE_FLAG) -#define FUTEX_TRYLOCK_PI_PRIVATE (FUTEX_TRYLOCK_PI | FUTEX_PRIVATE_FLAG) -#define FUTEX_WAIT_BITSET_PRIVATE (FUTEX_WAIT_BITSET | FUTEX_PRIVATE_FLAG) -#define FUTEX_WAKE_BITSET_PRIVATE (FUTEX_WAKE_BITSET | FUTEX_PRIVATE_FLAG) -#define FUTEX_WAIT_REQUEUE_PI_PRIVATE (FUTEX_WAIT_REQUEUE_PI | \ - FUTEX_PRIVATE_FLAG) -#define FUTEX_CMP_REQUEUE_PI_PRIVATE (FUTEX_CMP_REQUEUE_PI | \ - FUTEX_PRIVATE_FLAG) - -/* - * Support for robust futexes: the kernel cleans up held futexes at - * thread exit time. - */ - -/* - * Per-lock list entry - embedded in user-space locks, somewhere close - * to the futex field. (Note: user-space uses a double-linked list to - * achieve O(1) list add and remove, but the kernel only needs to know - * about the forward link) - * - * NOTE: this structure is part of the syscall ABI, and must not be - * changed. - */ -struct robust_list { - struct robust_list __user *next; -}; - -/* - * Per-thread list head: - * - * NOTE: this structure is part of the syscall ABI, and must only be - * changed if the change is first communicated with the glibc folks. - * (When an incompatible change is done, we'll increase the structure - * size, which glibc will detect) - */ -struct robust_list_head { - /* - * The head of the list. Points back to itself if empty: - */ - struct robust_list list; - - /* - * This relative offset is set by user-space, it gives the kernel - * the relative position of the futex field to examine. This way - * we keep userspace flexible, to freely shape its data-structure, - * without hardcoding any particular offset into the kernel: - */ - long futex_offset; - - /* - * The death of the thread may race with userspace setting - * up a lock's links. So to handle this race, userspace first - * sets this field to the address of the to-be-taken lock, - * then does the lock acquire, and then adds itself to the - * list, and then clears this field. Hence the kernel will - * always have full knowledge of all locks that the thread - * _might_ have taken. We check the owner TID in any case, - * so only truly owned locks will be handled. - */ - struct robust_list __user *list_op_pending; -}; - -/* - * Are there any waiters for this robust futex: - */ -#define FUTEX_WAITERS 0x80000000 - -/* - * The kernel signals via this bit that a thread holding a futex - * has exited without unlocking the futex. The kernel also does - * a FUTEX_WAKE on such futexes, after setting the bit, to wake - * up any possible waiters: - */ -#define FUTEX_OWNER_DIED 0x40000000 - -/* - * The rest of the robust-futex field is for the TID: - */ -#define FUTEX_TID_MASK 0x3fffffff - -/* - * This limit protects against a deliberately circular list. - * (Not worth introducing an rlimit for it) - */ -#define ROBUST_LIST_LIMIT 2048 - -/* - * bitset with all bits set for the FUTEX_xxx_BITSET OPs to request a - * match of any bit. - */ -#define FUTEX_BITSET_MATCH_ANY 0xffffffff - -#ifdef __KERNEL__ struct inode; struct mm_struct; struct task_struct; @@ -185,31 +64,4 @@ static inline void exit_pi_state_list(struct task_struct *curr) { } #endif -#endif /* __KERNEL__ */ - -#define FUTEX_OP_SET 0 /* *(int *)UADDR2 = OPARG; */ -#define FUTEX_OP_ADD 1 /* *(int *)UADDR2 += OPARG; */ -#define FUTEX_OP_OR 2 /* *(int *)UADDR2 |= OPARG; */ -#define FUTEX_OP_ANDN 3 /* *(int *)UADDR2 &= ~OPARG; */ -#define FUTEX_OP_XOR 4 /* *(int *)UADDR2 ^= OPARG; */ - -#define FUTEX_OP_OPARG_SHIFT 8 /* Use (1 << OPARG) instead of OPARG. */ - -#define FUTEX_OP_CMP_EQ 0 /* if (oldval == CMPARG) wake */ -#define FUTEX_OP_CMP_NE 1 /* if (oldval != CMPARG) wake */ -#define FUTEX_OP_CMP_LT 2 /* if (oldval < CMPARG) wake */ -#define FUTEX_OP_CMP_LE 3 /* if (oldval <= CMPARG) wake */ -#define FUTEX_OP_CMP_GT 4 /* if (oldval > CMPARG) wake */ -#define FUTEX_OP_CMP_GE 5 /* if (oldval >= CMPARG) wake */ - -/* FUTEX_WAKE_OP will perform atomically - int oldval = *(int *)UADDR2; - *(int *)UADDR2 = oldval OP OPARG; - if (oldval CMP CMPARG) - wake UADDR2; */ - -#define FUTEX_OP(op, oparg, cmp, cmparg) \ - (((op & 0xf) << 28) | ((cmp & 0xf) << 24) \ - | ((oparg & 0xfff) << 12) | (cmparg & 0xfff)) - #endif diff --git a/include/linux/gameport.h b/include/linux/gameport.h index b986be513406..bb7de09e8d57 100644 --- a/include/linux/gameport.h +++ b/include/linux/gameport.h @@ -1,6 +1,3 @@ -#ifndef _GAMEPORT_H -#define _GAMEPORT_H - /* * Copyright (c) 1999-2002 Vojtech Pavlik * @@ -8,8 +5,9 @@ * under the terms of the GNU General Public License version 2 as published by * the Free Software Foundation. */ +#ifndef _GAMEPORT_H +#define _GAMEPORT_H -#ifdef __KERNEL__ #include <asm/io.h> #include <linux/types.h> #include <linux/list.h> @@ -17,6 +15,7 @@ #include <linux/device.h> #include <linux/timer.h> #include <linux/slab.h> +#include <uapi/linux/gameport.h> struct gameport { @@ -166,24 +165,6 @@ void gameport_unregister_driver(struct gameport_driver *drv); module_driver(__gameport_driver, gameport_register_driver, \ gameport_unregister_driver) -#endif /* __KERNEL__ */ - -#define GAMEPORT_MODE_DISABLED 0 -#define GAMEPORT_MODE_RAW 1 -#define GAMEPORT_MODE_COOKED 2 - -#define GAMEPORT_ID_VENDOR_ANALOG 0x0001 -#define GAMEPORT_ID_VENDOR_MADCATZ 0x0002 -#define GAMEPORT_ID_VENDOR_LOGITECH 0x0003 -#define GAMEPORT_ID_VENDOR_CREATIVE 0x0004 -#define GAMEPORT_ID_VENDOR_GENIUS 0x0005 -#define GAMEPORT_ID_VENDOR_INTERACT 0x0006 -#define GAMEPORT_ID_VENDOR_MICROSOFT 0x0007 -#define GAMEPORT_ID_VENDOR_THRUSTMASTER 0x0008 -#define GAMEPORT_ID_VENDOR_GRAVIS 0x0009 -#define GAMEPORT_ID_VENDOR_GUILLEMOT 0x000a - -#ifdef __KERNEL__ static inline void gameport_trigger(struct gameport *gameport) { @@ -235,5 +216,4 @@ static inline void gameport_set_poll_interval(struct gameport *gameport, unsigne void gameport_start_polling(struct gameport *gameport); void gameport_stop_polling(struct gameport *gameport); -#endif /* __KERNEL__ */ #endif diff --git a/include/linux/genetlink.h b/include/linux/genetlink.h index 5ab61c1eb6bf..55b685719d52 100644 --- a/include/linux/genetlink.h +++ b/include/linux/genetlink.h @@ -1,86 +1,8 @@ #ifndef __LINUX_GENERIC_NETLINK_H #define __LINUX_GENERIC_NETLINK_H -#include <linux/types.h> -#include <linux/netlink.h> +#include <uapi/linux/genetlink.h> -#define GENL_NAMSIZ 16 /* length of family name */ - -#define GENL_MIN_ID NLMSG_MIN_TYPE -#define GENL_MAX_ID 1023 - -struct genlmsghdr { - __u8 cmd; - __u8 version; - __u16 reserved; -}; - -#define GENL_HDRLEN NLMSG_ALIGN(sizeof(struct genlmsghdr)) - -#define GENL_ADMIN_PERM 0x01 -#define GENL_CMD_CAP_DO 0x02 -#define GENL_CMD_CAP_DUMP 0x04 -#define GENL_CMD_CAP_HASPOL 0x08 - -/* - * List of reserved static generic netlink identifiers: - */ -#define GENL_ID_GENERATE 0 -#define GENL_ID_CTRL NLMSG_MIN_TYPE - -/************************************************************************** - * Controller - **************************************************************************/ - -enum { - CTRL_CMD_UNSPEC, - CTRL_CMD_NEWFAMILY, - CTRL_CMD_DELFAMILY, - CTRL_CMD_GETFAMILY, - CTRL_CMD_NEWOPS, - CTRL_CMD_DELOPS, - CTRL_CMD_GETOPS, - CTRL_CMD_NEWMCAST_GRP, - CTRL_CMD_DELMCAST_GRP, - CTRL_CMD_GETMCAST_GRP, /* unused */ - __CTRL_CMD_MAX, -}; - -#define CTRL_CMD_MAX (__CTRL_CMD_MAX - 1) - -enum { - CTRL_ATTR_UNSPEC, - CTRL_ATTR_FAMILY_ID, - CTRL_ATTR_FAMILY_NAME, - CTRL_ATTR_VERSION, - CTRL_ATTR_HDRSIZE, - CTRL_ATTR_MAXATTR, - CTRL_ATTR_OPS, - CTRL_ATTR_MCAST_GROUPS, - __CTRL_ATTR_MAX, -}; - -#define CTRL_ATTR_MAX (__CTRL_ATTR_MAX - 1) - -enum { - CTRL_ATTR_OP_UNSPEC, - CTRL_ATTR_OP_ID, - CTRL_ATTR_OP_FLAGS, - __CTRL_ATTR_OP_MAX, -}; - -#define CTRL_ATTR_OP_MAX (__CTRL_ATTR_OP_MAX - 1) - -enum { - CTRL_ATTR_MCAST_GRP_UNSPEC, - CTRL_ATTR_MCAST_GRP_NAME, - CTRL_ATTR_MCAST_GRP_ID, - __CTRL_ATTR_MCAST_GRP_MAX, -}; - -#define CTRL_ATTR_MCAST_GRP_MAX (__CTRL_ATTR_MCAST_GRP_MAX - 1) - -#ifdef __KERNEL__ /* All generic netlink requests are serialized by a global lock. */ extern void genl_lock(void); @@ -113,6 +35,4 @@ extern int lockdep_genl_is_held(void); #define MODULE_ALIAS_GENL_FAMILY(family)\ MODULE_ALIAS_NET_PF_PROTO_NAME(PF_NETLINK, NETLINK_GENERIC, "-family-" family) -#endif /* __KERNEL__ */ - #endif /* __LINUX_GENERIC_NETLINK_H */ diff --git a/include/linux/hdlc.h b/include/linux/hdlc.h index ee275c8b3df1..1acb1445e05f 100644 --- a/include/linux/hdlc.h +++ b/include/linux/hdlc.h @@ -7,24 +7,14 @@ * under the terms of version 2 of the GNU General Public License * as published by the Free Software Foundation. */ - #ifndef __HDLC_H #define __HDLC_H -#define HDLC_MAX_MTU 1500 /* Ethernet 1500 bytes */ -#if 0 -#define HDLC_MAX_MRU (HDLC_MAX_MTU + 10 + 14 + 4) /* for ETH+VLAN over FR */ -#else -#define HDLC_MAX_MRU 1600 /* as required for FR network */ -#endif - - -#ifdef __KERNEL__ - #include <linux/skbuff.h> #include <linux/netdevice.h> #include <linux/hdlc/ioctl.h> +#include <uapi/linux/hdlc.h> /* This structure is a private property of HDLC protocols. Hardware drivers have no interest here */ @@ -127,5 +117,4 @@ static __inline__ __be16 hdlc_type_trans(struct sk_buff *skb, return htons(ETH_P_HDLC); } -#endif /* __KERNEL */ #endif /* __HDLC_H */ diff --git a/include/linux/hdlcdrv.h b/include/linux/hdlcdrv.h index c010b4a785b8..be3be25bb898 100644 --- a/include/linux/hdlcdrv.h +++ b/include/linux/hdlcdrv.h @@ -3,110 +3,14 @@ * The Linux soundcard driver for 1200 baud and 9600 baud packet radio * (C) 1996-1998 by Thomas Sailer, HB9JNX/AE4WA */ - #ifndef _HDLCDRV_H #define _HDLCDRV_H -/* -------------------------------------------------------------------- */ -/* - * structs for the IOCTL commands - */ - -struct hdlcdrv_params { - int iobase; - int irq; - int dma; - int dma2; - int seriobase; - int pariobase; - int midiiobase; -}; - -struct hdlcdrv_channel_params { - int tx_delay; /* the transmitter keyup delay in 10ms units */ - int tx_tail; /* the transmitter keyoff delay in 10ms units */ - int slottime; /* the slottime in 10ms; usually 10 = 100ms */ - int ppersist; /* the p-persistence 0..255 */ - int fulldup; /* some driver do not support full duplex, setting */ - /* this just makes them send even if DCD is on */ -}; - -struct hdlcdrv_old_channel_state { - int ptt; - int dcd; - int ptt_keyed; -}; - -struct hdlcdrv_channel_state { - int ptt; - int dcd; - int ptt_keyed; - unsigned long tx_packets; - unsigned long tx_errors; - unsigned long rx_packets; - unsigned long rx_errors; -}; - -struct hdlcdrv_ioctl { - int cmd; - union { - struct hdlcdrv_params mp; - struct hdlcdrv_channel_params cp; - struct hdlcdrv_channel_state cs; - struct hdlcdrv_old_channel_state ocs; - unsigned int calibrate; - unsigned char bits; - char modename[128]; - char drivername[32]; - } data; -}; - -/* -------------------------------------------------------------------- */ - -/* - * ioctl values - */ -#define HDLCDRVCTL_GETMODEMPAR 0 -#define HDLCDRVCTL_SETMODEMPAR 1 -#define HDLCDRVCTL_MODEMPARMASK 2 /* not handled by hdlcdrv */ -#define HDLCDRVCTL_GETCHANNELPAR 10 -#define HDLCDRVCTL_SETCHANNELPAR 11 -#define HDLCDRVCTL_OLDGETSTAT 20 -#define HDLCDRVCTL_CALIBRATE 21 -#define HDLCDRVCTL_GETSTAT 22 - -/* - * these are mainly for debugging purposes - */ -#define HDLCDRVCTL_GETSAMPLES 30 -#define HDLCDRVCTL_GETBITS 31 - -/* - * not handled by hdlcdrv, but by its depending drivers - */ -#define HDLCDRVCTL_GETMODE 40 -#define HDLCDRVCTL_SETMODE 41 -#define HDLCDRVCTL_MODELIST 42 -#define HDLCDRVCTL_DRIVERNAME 43 - -/* - * mask of needed modem parameters, returned by HDLCDRVCTL_MODEMPARMASK - */ -#define HDLCDRV_PARMASK_IOBASE (1<<0) -#define HDLCDRV_PARMASK_IRQ (1<<1) -#define HDLCDRV_PARMASK_DMA (1<<2) -#define HDLCDRV_PARMASK_DMA2 (1<<3) -#define HDLCDRV_PARMASK_SERIOBASE (1<<4) -#define HDLCDRV_PARMASK_PARIOBASE (1<<5) -#define HDLCDRV_PARMASK_MIDIIOBASE (1<<6) - -/* -------------------------------------------------------------------- */ - -#ifdef __KERNEL__ #include <linux/netdevice.h> #include <linux/if.h> #include <linux/spinlock.h> +#include <uapi/linux/hdlcdrv.h> #define HDLCDRV_MAGIC 0x5ac6e778 #define HDLCDRV_HDLCBUFFER 32 /* should be a power of 2 for speed reasons */ @@ -368,10 +272,4 @@ void hdlcdrv_unregister(struct net_device *dev); -#endif /* __KERNEL__ */ - -/* -------------------------------------------------------------------- */ - #endif /* _HDLCDRV_H */ - -/* -------------------------------------------------------------------- */ diff --git a/include/linux/hid.h b/include/linux/hid.h index 7e1f37db7582..c076041a069e 100644 --- a/include/linux/hid.h +++ b/include/linux/hid.h @@ -1,12 +1,8 @@ -#ifndef __HID_H -#define __HID_H - /* * Copyright (c) 1999 Andreas Gal * Copyright (c) 2000-2001 Vojtech Pavlik * Copyright (c) 2006-2007 Jiri Kosina */ - /* * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -26,43 +22,9 @@ * e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail: * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic */ +#ifndef __HID_H +#define __HID_H -/* - * USB HID (Human Interface Device) interface class code - */ - -#define USB_INTERFACE_CLASS_HID 3 - -/* - * USB HID interface subclass and protocol codes - */ - -#define USB_INTERFACE_SUBCLASS_BOOT 1 -#define USB_INTERFACE_PROTOCOL_KEYBOARD 1 -#define USB_INTERFACE_PROTOCOL_MOUSE 2 - -/* - * HID class requests - */ - -#define HID_REQ_GET_REPORT 0x01 -#define HID_REQ_GET_IDLE 0x02 -#define HID_REQ_GET_PROTOCOL 0x03 -#define HID_REQ_SET_REPORT 0x09 -#define HID_REQ_SET_IDLE 0x0A -#define HID_REQ_SET_PROTOCOL 0x0B - -/* - * HID class descriptor types - */ - -#define HID_DT_HID (USB_TYPE_CLASS | 0x01) -#define HID_DT_REPORT (USB_TYPE_CLASS | 0x02) -#define HID_DT_PHYSICAL (USB_TYPE_CLASS | 0x03) - -#define HID_MAX_DESCRIPTOR_SIZE 4096 - -#ifdef __KERNEL__ #include <linux/types.h> #include <linux/slab.h> @@ -73,6 +35,7 @@ #include <linux/input.h> #include <linux/semaphore.h> #include <linux/power_supply.h> +#include <uapi/linux/hid.h> /* * We parse each description item into this structure. Short items data @@ -943,7 +906,4 @@ do { \ #define hid_dbg(hid, fmt, arg...) \ dev_dbg(&(hid)->dev, fmt, ##arg) -#endif /* __KERNEL__ */ - #endif - diff --git a/include/linux/hiddev.h b/include/linux/hiddev.h index a3f481a3063b..a5dd8148660b 100644 --- a/include/linux/hiddev.h +++ b/include/linux/hiddev.h @@ -1,12 +1,8 @@ -#ifndef _HIDDEV_H -#define _HIDDEV_H - /* * Copyright (c) 1999-2000 Vojtech Pavlik * * Sponsored by SuSE */ - /* * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -26,190 +22,11 @@ * e-mail - mail your message to <vojtech@suse.cz>, or by paper mail: * Vojtech Pavlik, Ucitelska 1576, Prague 8, 182 00 Czech Republic */ +#ifndef _HIDDEV_H +#define _HIDDEV_H -#include <linux/types.h> - -/* - * The event structure itself - */ - -struct hiddev_event { - unsigned hid; - signed int value; -}; - -struct hiddev_devinfo { - __u32 bustype; - __u32 busnum; - __u32 devnum; - __u32 ifnum; - __s16 vendor; - __s16 product; - __s16 version; - __u32 num_applications; -}; - -struct hiddev_collection_info { - __u32 index; - __u32 type; - __u32 usage; - __u32 level; -}; - -#define HID_STRING_SIZE 256 -struct hiddev_string_descriptor { - __s32 index; - char value[HID_STRING_SIZE]; -}; - -struct hiddev_report_info { - __u32 report_type; - __u32 report_id; - __u32 num_fields; -}; - -/* To do a GUSAGE/SUSAGE, fill in at least usage_code, report_type and - * report_id. Set report_id to REPORT_ID_UNKNOWN if the rest of the fields - * are unknown. Otherwise use a usage_ref struct filled in from a previous - * successful GUSAGE call to save time. To actually send a value to the - * device, perform a SUSAGE first, followed by a SREPORT. An INITREPORT or a - * GREPORT isn't necessary for a GUSAGE to return valid data. - */ -#define HID_REPORT_ID_UNKNOWN 0xffffffff -#define HID_REPORT_ID_FIRST 0x00000100 -#define HID_REPORT_ID_NEXT 0x00000200 -#define HID_REPORT_ID_MASK 0x000000ff -#define HID_REPORT_ID_MAX 0x000000ff - -#define HID_REPORT_TYPE_INPUT 1 -#define HID_REPORT_TYPE_OUTPUT 2 -#define HID_REPORT_TYPE_FEATURE 3 -#define HID_REPORT_TYPE_MIN 1 -#define HID_REPORT_TYPE_MAX 3 - -struct hiddev_field_info { - __u32 report_type; - __u32 report_id; - __u32 field_index; - __u32 maxusage; - __u32 flags; - __u32 physical; /* physical usage for this field */ - __u32 logical; /* logical usage for this field */ - __u32 application; /* application usage for this field */ - __s32 logical_minimum; - __s32 logical_maximum; - __s32 physical_minimum; - __s32 physical_maximum; - __u32 unit_exponent; - __u32 unit; -}; - -/* Fill in report_type, report_id and field_index to get the information on a - * field. - */ -#define HID_FIELD_CONSTANT 0x001 -#define HID_FIELD_VARIABLE 0x002 -#define HID_FIELD_RELATIVE 0x004 -#define HID_FIELD_WRAP 0x008 -#define HID_FIELD_NONLINEAR 0x010 -#define HID_FIELD_NO_PREFERRED 0x020 -#define HID_FIELD_NULL_STATE 0x040 -#define HID_FIELD_VOLATILE 0x080 -#define HID_FIELD_BUFFERED_BYTE 0x100 - -struct hiddev_usage_ref { - __u32 report_type; - __u32 report_id; - __u32 field_index; - __u32 usage_index; - __u32 usage_code; - __s32 value; -}; - -/* hiddev_usage_ref_multi is used for sending multiple bytes to a control. - * It really manifests itself as setting the value of consecutive usages */ -#define HID_MAX_MULTI_USAGES 1024 -struct hiddev_usage_ref_multi { - struct hiddev_usage_ref uref; - __u32 num_values; - __s32 values[HID_MAX_MULTI_USAGES]; -}; - -/* FIELD_INDEX_NONE is returned in read() data from the kernel when flags - * is set to (HIDDEV_FLAG_UREF | HIDDEV_FLAG_REPORT) and a new report has - * been sent by the device - */ -#define HID_FIELD_INDEX_NONE 0xffffffff - -/* - * Protocol version. - */ - -#define HID_VERSION 0x010004 - -/* - * IOCTLs (0x00 - 0x7f) - */ - -#define HIDIOCGVERSION _IOR('H', 0x01, int) -#define HIDIOCAPPLICATION _IO('H', 0x02) -#define HIDIOCGDEVINFO _IOR('H', 0x03, struct hiddev_devinfo) -#define HIDIOCGSTRING _IOR('H', 0x04, struct hiddev_string_descriptor) -#define HIDIOCINITREPORT _IO('H', 0x05) -#define HIDIOCGNAME(len) _IOC(_IOC_READ, 'H', 0x06, len) -#define HIDIOCGREPORT _IOW('H', 0x07, struct hiddev_report_info) -#define HIDIOCSREPORT _IOW('H', 0x08, struct hiddev_report_info) -#define HIDIOCGREPORTINFO _IOWR('H', 0x09, struct hiddev_report_info) -#define HIDIOCGFIELDINFO _IOWR('H', 0x0A, struct hiddev_field_info) -#define HIDIOCGUSAGE _IOWR('H', 0x0B, struct hiddev_usage_ref) -#define HIDIOCSUSAGE _IOW('H', 0x0C, struct hiddev_usage_ref) -#define HIDIOCGUCODE _IOWR('H', 0x0D, struct hiddev_usage_ref) -#define HIDIOCGFLAG _IOR('H', 0x0E, int) -#define HIDIOCSFLAG _IOW('H', 0x0F, int) -#define HIDIOCGCOLLECTIONINDEX _IOW('H', 0x10, struct hiddev_usage_ref) -#define HIDIOCGCOLLECTIONINFO _IOWR('H', 0x11, struct hiddev_collection_info) -#define HIDIOCGPHYS(len) _IOC(_IOC_READ, 'H', 0x12, len) - -/* For writing/reading to multiple/consecutive usages */ -#define HIDIOCGUSAGES _IOWR('H', 0x13, struct hiddev_usage_ref_multi) -#define HIDIOCSUSAGES _IOW('H', 0x14, struct hiddev_usage_ref_multi) - -/* - * Flags to be used in HIDIOCSFLAG - */ -#define HIDDEV_FLAG_UREF 0x1 -#define HIDDEV_FLAG_REPORT 0x2 -#define HIDDEV_FLAGS 0x3 - -/* To traverse the input report descriptor info for a HID device, perform the - * following: - * - * rinfo.report_type = HID_REPORT_TYPE_INPUT; - * rinfo.report_id = HID_REPORT_ID_FIRST; - * ret = ioctl(fd, HIDIOCGREPORTINFO, &rinfo); - * - * while (ret >= 0) { - * for (i = 0; i < rinfo.num_fields; i++) { - * finfo.report_type = rinfo.report_type; - * finfo.report_id = rinfo.report_id; - * finfo.field_index = i; - * ioctl(fd, HIDIOCGFIELDINFO, &finfo); - * for (j = 0; j < finfo.maxusage; j++) { - * uref.report_type = rinfo.report_type; - * uref.report_id = rinfo.report_id; - * uref.field_index = i; - * uref.usage_index = j; - * ioctl(fd, HIDIOCGUCODE, &uref); - * ioctl(fd, HIDIOCGUSAGE, &uref); - * } - * } - * rinfo.report_id |= HID_REPORT_ID_NEXT; - * ret = ioctl(fd, HIDIOCGREPORTINFO, &rinfo); - * } - */ - +#include <uapi/linux/hiddev.h> -#ifdef __KERNEL__ /* * In-kernel definitions. @@ -237,4 +54,3 @@ static inline void hiddev_report_event(struct hid_device *hid, struct hid_report #endif #endif -#endif diff --git a/include/linux/hidraw.h b/include/linux/hidraw.h index 45e9fcb8d877..2451662c728a 100644 --- a/include/linux/hidraw.h +++ b/include/linux/hidraw.h @@ -1,10 +1,6 @@ -#ifndef _HIDRAW_H -#define _HIDRAW_H - /* * Copyright (c) 2007 Jiri Kosina */ - /* * This program is free software; you can redistribute it and/or modify it * under the terms and conditions of the GNU General Public License, @@ -14,39 +10,11 @@ * this program; if not, write to the Free Software Foundation, Inc., * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. */ +#ifndef _HIDRAW_H +#define _HIDRAW_H -#include <linux/hid.h> -#include <linux/types.h> - -struct hidraw_report_descriptor { - __u32 size; - __u8 value[HID_MAX_DESCRIPTOR_SIZE]; -}; - -struct hidraw_devinfo { - __u32 bustype; - __s16 vendor; - __s16 product; -}; - -/* ioctl interface */ -#define HIDIOCGRDESCSIZE _IOR('H', 0x01, int) -#define HIDIOCGRDESC _IOR('H', 0x02, struct hidraw_report_descriptor) -#define HIDIOCGRAWINFO _IOR('H', 0x03, struct hidraw_devinfo) -#define HIDIOCGRAWNAME(len) _IOC(_IOC_READ, 'H', 0x04, len) -#define HIDIOCGRAWPHYS(len) _IOC(_IOC_READ, 'H', 0x05, len) -/* The first byte of SFEATURE and GFEATURE is the report number */ -#define HIDIOCSFEATURE(len) _IOC(_IOC_WRITE|_IOC_READ, 'H', 0x06, len) -#define HIDIOCGFEATURE(len) _IOC(_IOC_WRITE|_IOC_READ, 'H', 0x07, len) - -#define HIDRAW_FIRST_MINOR 0 -#define HIDRAW_MAX_DEVICES 64 -/* number of reports to buffer */ -#define HIDRAW_BUFFER_SIZE 64 - +#include <uapi/linux/hidraw.h> -/* kernel-only API declarations */ -#ifdef __KERNEL__ struct hidraw { unsigned int minor; @@ -88,5 +56,3 @@ static inline void hidraw_disconnect(struct hid_device *hid) { } #endif #endif - -#endif diff --git a/include/linux/hpet.h b/include/linux/hpet.h index 219ca4f6bea6..9427ab4e01c3 100644 --- a/include/linux/hpet.h +++ b/include/linux/hpet.h @@ -1,9 +1,8 @@ #ifndef __HPET__ #define __HPET__ 1 -#include <linux/compiler.h> +#include <uapi/linux/hpet.h> -#ifdef __KERNEL__ /* * Offsets into HPET Registers @@ -108,24 +107,4 @@ static inline void hpet_reserve_timer(struct hpet_data *hd, int timer) int hpet_alloc(struct hpet_data *); -#endif /* __KERNEL__ */ - -struct hpet_info { - unsigned long hi_ireqfreq; /* Hz */ - unsigned long hi_flags; /* information */ - unsigned short hi_hpet; - unsigned short hi_timer; -}; - -#define HPET_INFO_PERIODIC 0x0010 /* periodic-capable comparator */ - -#define HPET_IE_ON _IO('h', 0x01) /* interrupt on */ -#define HPET_IE_OFF _IO('h', 0x02) /* interrupt off */ -#define HPET_INFO _IOR('h', 0x03, struct hpet_info) -#define HPET_EPI _IO('h', 0x04) /* enable periodic */ -#define HPET_DPI _IO('h', 0x05) /* disable periodic */ -#define HPET_IRQFREQ _IOW('h', 0x6, unsigned long) /* IRQFREQ usec */ - -#define MAX_HPET_TBS 8 /* maximum hpet timer blocks */ - #endif /* !__HPET__ */ diff --git a/include/linux/i2c-dev.h b/include/linux/i2c-dev.h index 8a7406b2114d..79727144c5cd 100644 --- a/include/linux/i2c-dev.h +++ b/include/linux/i2c-dev.h @@ -19,57 +19,10 @@ Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. */ - #ifndef _LINUX_I2C_DEV_H #define _LINUX_I2C_DEV_H -#include <linux/types.h> -#include <linux/compiler.h> - -/* /dev/i2c-X ioctl commands. The ioctl's parameter is always an - * unsigned long, except for: - * - I2C_FUNCS, takes pointer to an unsigned long - * - I2C_RDWR, takes pointer to struct i2c_rdwr_ioctl_data - * - I2C_SMBUS, takes pointer to struct i2c_smbus_ioctl_data - */ -#define I2C_RETRIES 0x0701 /* number of times a device address should - be polled when not acknowledging */ -#define I2C_TIMEOUT 0x0702 /* set timeout in units of 10 ms */ - -/* NOTE: Slave address is 7 or 10 bits, but 10-bit addresses - * are NOT supported! (due to code brokenness) - */ -#define I2C_SLAVE 0x0703 /* Use this slave address */ -#define I2C_SLAVE_FORCE 0x0706 /* Use this slave address, even if it - is already in use by a driver! */ -#define I2C_TENBIT 0x0704 /* 0 for 7 bit addrs, != 0 for 10 bit */ - -#define I2C_FUNCS 0x0705 /* Get the adapter functionality mask */ - -#define I2C_RDWR 0x0707 /* Combined R/W transfer (one STOP only) */ - -#define I2C_PEC 0x0708 /* != 0 to use PEC with SMBus */ -#define I2C_SMBUS 0x0720 /* SMBus transfer */ +#include <uapi/linux/i2c-dev.h> - -/* This is the structure as used in the I2C_SMBUS ioctl call */ -struct i2c_smbus_ioctl_data { - __u8 read_write; - __u8 command; - __u32 size; - union i2c_smbus_data __user *data; -}; - -/* This is the structure as used in the I2C_RDWR ioctl call */ -struct i2c_rdwr_ioctl_data { - struct i2c_msg __user *msgs; /* pointers to i2c_msgs */ - __u32 nmsgs; /* number of i2c_msgs */ -}; - -#define I2C_RDRW_IOCTL_MAX_MSGS 42 - -#ifdef __KERNEL__ #define I2C_MAJOR 89 /* Device major number */ -#endif - #endif /* _LINUX_I2C_DEV_H */ diff --git a/include/linux/i2c.h b/include/linux/i2c.h index 94aed0c85bb0..800de224336b 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -23,18 +23,16 @@ /* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and Frodo Looijaard <frodol@dds.nl> */ - #ifndef _LINUX_I2C_H #define _LINUX_I2C_H -#include <linux/types.h> -#ifdef __KERNEL__ #include <linux/mod_devicetable.h> #include <linux/device.h> /* for struct device */ #include <linux/sched.h> /* for completion */ #include <linux/mutex.h> #include <linux/of.h> /* for struct device_node */ #include <linux/swab.h> /* for swab16 */ +#include <uapi/linux/i2c.h> extern struct bus_type i2c_bus_type; extern struct device_type i2c_adapter_type; @@ -503,125 +501,4 @@ static inline int i2c_adapter_id(struct i2c_adapter *adap) i2c_del_driver) #endif /* I2C */ -#endif /* __KERNEL__ */ - -/** - * struct i2c_msg - an I2C transaction segment beginning with START - * @addr: Slave address, either seven or ten bits. When this is a ten - * bit address, I2C_M_TEN must be set in @flags and the adapter - * must support I2C_FUNC_10BIT_ADDR. - * @flags: I2C_M_RD is handled by all adapters. No other flags may be - * provided unless the adapter exported the relevant I2C_FUNC_* - * flags through i2c_check_functionality(). - * @len: Number of data bytes in @buf being read from or written to the - * I2C slave address. For read transactions where I2C_M_RECV_LEN - * is set, the caller guarantees that this buffer can hold up to - * 32 bytes in addition to the initial length byte sent by the - * slave (plus, if used, the SMBus PEC); and this value will be - * incremented by the number of block data bytes received. - * @buf: The buffer into which data is read, or from which it's written. - * - * An i2c_msg is the low level representation of one segment of an I2C - * transaction. It is visible to drivers in the @i2c_transfer() procedure, - * to userspace from i2c-dev, and to I2C adapter drivers through the - * @i2c_adapter.@master_xfer() method. - * - * Except when I2C "protocol mangling" is used, all I2C adapters implement - * the standard rules for I2C transactions. Each transaction begins with a - * START. That is followed by the slave address, and a bit encoding read - * versus write. Then follow all the data bytes, possibly including a byte - * with SMBus PEC. The transfer terminates with a NAK, or when all those - * bytes have been transferred and ACKed. If this is the last message in a - * group, it is followed by a STOP. Otherwise it is followed by the next - * @i2c_msg transaction segment, beginning with a (repeated) START. - * - * Alternatively, when the adapter supports I2C_FUNC_PROTOCOL_MANGLING then - * passing certain @flags may have changed those standard protocol behaviors. - * Those flags are only for use with broken/nonconforming slaves, and with - * adapters which are known to support the specific mangling options they - * need (one or more of IGNORE_NAK, NO_RD_ACK, NOSTART, and REV_DIR_ADDR). - */ -struct i2c_msg { - __u16 addr; /* slave address */ - __u16 flags; -#define I2C_M_TEN 0x0010 /* this is a ten bit chip address */ -#define I2C_M_RD 0x0001 /* read data, from slave to master */ -#define I2C_M_STOP 0x8000 /* if I2C_FUNC_PROTOCOL_MANGLING */ -#define I2C_M_NOSTART 0x4000 /* if I2C_FUNC_NOSTART */ -#define I2C_M_REV_DIR_ADDR 0x2000 /* if I2C_FUNC_PROTOCOL_MANGLING */ -#define I2C_M_IGNORE_NAK 0x1000 /* if I2C_FUNC_PROTOCOL_MANGLING */ -#define I2C_M_NO_RD_ACK 0x0800 /* if I2C_FUNC_PROTOCOL_MANGLING */ -#define I2C_M_RECV_LEN 0x0400 /* length will be first received byte */ - __u16 len; /* msg length */ - __u8 *buf; /* pointer to msg data */ -}; - -/* To determine what functionality is present */ - -#define I2C_FUNC_I2C 0x00000001 -#define I2C_FUNC_10BIT_ADDR 0x00000002 -#define I2C_FUNC_PROTOCOL_MANGLING 0x00000004 /* I2C_M_IGNORE_NAK etc. */ -#define I2C_FUNC_SMBUS_PEC 0x00000008 -#define I2C_FUNC_NOSTART 0x00000010 /* I2C_M_NOSTART */ -#define I2C_FUNC_SMBUS_BLOCK_PROC_CALL 0x00008000 /* SMBus 2.0 */ -#define I2C_FUNC_SMBUS_QUICK 0x00010000 -#define I2C_FUNC_SMBUS_READ_BYTE 0x00020000 -#define I2C_FUNC_SMBUS_WRITE_BYTE 0x00040000 -#define I2C_FUNC_SMBUS_READ_BYTE_DATA 0x00080000 -#define I2C_FUNC_SMBUS_WRITE_BYTE_DATA 0x00100000 -#define I2C_FUNC_SMBUS_READ_WORD_DATA 0x00200000 -#define I2C_FUNC_SMBUS_WRITE_WORD_DATA 0x00400000 -#define I2C_FUNC_SMBUS_PROC_CALL 0x00800000 -#define I2C_FUNC_SMBUS_READ_BLOCK_DATA 0x01000000 -#define I2C_FUNC_SMBUS_WRITE_BLOCK_DATA 0x02000000 -#define I2C_FUNC_SMBUS_READ_I2C_BLOCK 0x04000000 /* I2C-like block xfer */ -#define I2C_FUNC_SMBUS_WRITE_I2C_BLOCK 0x08000000 /* w/ 1-byte reg. addr. */ - -#define I2C_FUNC_SMBUS_BYTE (I2C_FUNC_SMBUS_READ_BYTE | \ - I2C_FUNC_SMBUS_WRITE_BYTE) -#define I2C_FUNC_SMBUS_BYTE_DATA (I2C_FUNC_SMBUS_READ_BYTE_DATA | \ - I2C_FUNC_SMBUS_WRITE_BYTE_DATA) -#define I2C_FUNC_SMBUS_WORD_DATA (I2C_FUNC_SMBUS_READ_WORD_DATA | \ - I2C_FUNC_SMBUS_WRITE_WORD_DATA) -#define I2C_FUNC_SMBUS_BLOCK_DATA (I2C_FUNC_SMBUS_READ_BLOCK_DATA | \ - I2C_FUNC_SMBUS_WRITE_BLOCK_DATA) -#define I2C_FUNC_SMBUS_I2C_BLOCK (I2C_FUNC_SMBUS_READ_I2C_BLOCK | \ - I2C_FUNC_SMBUS_WRITE_I2C_BLOCK) - -#define I2C_FUNC_SMBUS_EMUL (I2C_FUNC_SMBUS_QUICK | \ - I2C_FUNC_SMBUS_BYTE | \ - I2C_FUNC_SMBUS_BYTE_DATA | \ - I2C_FUNC_SMBUS_WORD_DATA | \ - I2C_FUNC_SMBUS_PROC_CALL | \ - I2C_FUNC_SMBUS_WRITE_BLOCK_DATA | \ - I2C_FUNC_SMBUS_I2C_BLOCK | \ - I2C_FUNC_SMBUS_PEC) - -/* - * Data for SMBus Messages - */ -#define I2C_SMBUS_BLOCK_MAX 32 /* As specified in SMBus standard */ -union i2c_smbus_data { - __u8 byte; - __u16 word; - __u8 block[I2C_SMBUS_BLOCK_MAX + 2]; /* block[0] is used for length */ - /* and one more for user-space compatibility */ -}; - -/* i2c_smbus_xfer read or write markers */ -#define I2C_SMBUS_READ 1 -#define I2C_SMBUS_WRITE 0 - -/* SMBus transaction types (size parameter in the above functions) - Note: these no longer correspond to the (arbitrary) PIIX4 internal codes! */ -#define I2C_SMBUS_QUICK 0 -#define I2C_SMBUS_BYTE 1 -#define I2C_SMBUS_BYTE_DATA 2 -#define I2C_SMBUS_WORD_DATA 3 -#define I2C_SMBUS_PROC_CALL 4 -#define I2C_SMBUS_BLOCK_DATA 5 -#define I2C_SMBUS_I2C_BLOCK_BROKEN 6 -#define I2C_SMBUS_BLOCK_PROC_CALL 7 /* SMBus 2.0 */ -#define I2C_SMBUS_I2C_BLOCK_DATA 8 - #endif /* _LINUX_I2C_H */ diff --git a/include/linux/icmp.h b/include/linux/icmp.h index 474f2a51cf0a..efc18490627a 100644 --- a/include/linux/icmp.h +++ b/include/linux/icmp.h @@ -17,89 +17,11 @@ #ifndef _LINUX_ICMP_H #define _LINUX_ICMP_H -#include <linux/types.h> - -#define ICMP_ECHOREPLY 0 /* Echo Reply */ -#define ICMP_DEST_UNREACH 3 /* Destination Unreachable */ -#define ICMP_SOURCE_QUENCH 4 /* Source Quench */ -#define ICMP_REDIRECT 5 /* Redirect (change route) */ -#define ICMP_ECHO 8 /* Echo Request */ -#define ICMP_TIME_EXCEEDED 11 /* Time Exceeded */ -#define ICMP_PARAMETERPROB 12 /* Parameter Problem */ -#define ICMP_TIMESTAMP 13 /* Timestamp Request */ -#define ICMP_TIMESTAMPREPLY 14 /* Timestamp Reply */ -#define ICMP_INFO_REQUEST 15 /* Information Request */ -#define ICMP_INFO_REPLY 16 /* Information Reply */ -#define ICMP_ADDRESS 17 /* Address Mask Request */ -#define ICMP_ADDRESSREPLY 18 /* Address Mask Reply */ -#define NR_ICMP_TYPES 18 - - -/* Codes for UNREACH. */ -#define ICMP_NET_UNREACH 0 /* Network Unreachable */ -#define ICMP_HOST_UNREACH 1 /* Host Unreachable */ -#define ICMP_PROT_UNREACH 2 /* Protocol Unreachable */ -#define ICMP_PORT_UNREACH 3 /* Port Unreachable */ -#define ICMP_FRAG_NEEDED 4 /* Fragmentation Needed/DF set */ -#define ICMP_SR_FAILED 5 /* Source Route failed */ -#define ICMP_NET_UNKNOWN 6 -#define ICMP_HOST_UNKNOWN 7 -#define ICMP_HOST_ISOLATED 8 -#define ICMP_NET_ANO 9 -#define ICMP_HOST_ANO 10 -#define ICMP_NET_UNR_TOS 11 -#define ICMP_HOST_UNR_TOS 12 -#define ICMP_PKT_FILTERED 13 /* Packet filtered */ -#define ICMP_PREC_VIOLATION 14 /* Precedence violation */ -#define ICMP_PREC_CUTOFF 15 /* Precedence cut off */ -#define NR_ICMP_UNREACH 15 /* instead of hardcoding immediate value */ - -/* Codes for REDIRECT. */ -#define ICMP_REDIR_NET 0 /* Redirect Net */ -#define ICMP_REDIR_HOST 1 /* Redirect Host */ -#define ICMP_REDIR_NETTOS 2 /* Redirect Net for TOS */ -#define ICMP_REDIR_HOSTTOS 3 /* Redirect Host for TOS */ - -/* Codes for TIME_EXCEEDED. */ -#define ICMP_EXC_TTL 0 /* TTL count exceeded */ -#define ICMP_EXC_FRAGTIME 1 /* Fragment Reass time exceeded */ - - -struct icmphdr { - __u8 type; - __u8 code; - __sum16 checksum; - union { - struct { - __be16 id; - __be16 sequence; - } echo; - __be32 gateway; - struct { - __be16 __unused; - __be16 mtu; - } frag; - } un; -}; - -#ifdef __KERNEL__ #include <linux/skbuff.h> +#include <uapi/linux/icmp.h> static inline struct icmphdr *icmp_hdr(const struct sk_buff *skb) { return (struct icmphdr *)skb_transport_header(skb); } -#endif - -/* - * constants for (set|get)sockopt - */ - -#define ICMP_FILTER 1 - -struct icmp_filter { - __u32 data; -}; - - #endif /* _LINUX_ICMP_H */ diff --git a/include/linux/icmpv6.h b/include/linux/icmpv6.h index ba45e6bc0764..b4f6c29caced 100644 --- a/include/linux/icmpv6.h +++ b/include/linux/icmpv6.h @@ -1,174 +1,13 @@ #ifndef _LINUX_ICMPV6_H #define _LINUX_ICMPV6_H -#include <linux/types.h> -#include <asm/byteorder.h> - -struct icmp6hdr { - - __u8 icmp6_type; - __u8 icmp6_code; - __sum16 icmp6_cksum; - - - union { - __be32 un_data32[1]; - __be16 un_data16[2]; - __u8 un_data8[4]; - - struct icmpv6_echo { - __be16 identifier; - __be16 sequence; - } u_echo; - - struct icmpv6_nd_advt { -#if defined(__LITTLE_ENDIAN_BITFIELD) - __u32 reserved:5, - override:1, - solicited:1, - router:1, - reserved2:24; -#elif defined(__BIG_ENDIAN_BITFIELD) - __u32 router:1, - solicited:1, - override:1, - reserved:29; -#else -#error "Please fix <asm/byteorder.h>" -#endif - } u_nd_advt; - - struct icmpv6_nd_ra { - __u8 hop_limit; -#if defined(__LITTLE_ENDIAN_BITFIELD) - __u8 reserved:3, - router_pref:2, - home_agent:1, - other:1, - managed:1; - -#elif defined(__BIG_ENDIAN_BITFIELD) - __u8 managed:1, - other:1, - home_agent:1, - router_pref:2, - reserved:3; -#else -#error "Please fix <asm/byteorder.h>" -#endif - __be16 rt_lifetime; - } u_nd_ra; - - } icmp6_dataun; - -#define icmp6_identifier icmp6_dataun.u_echo.identifier -#define icmp6_sequence icmp6_dataun.u_echo.sequence -#define icmp6_pointer icmp6_dataun.un_data32[0] -#define icmp6_mtu icmp6_dataun.un_data32[0] -#define icmp6_unused icmp6_dataun.un_data32[0] -#define icmp6_maxdelay icmp6_dataun.un_data16[0] -#define icmp6_router icmp6_dataun.u_nd_advt.router -#define icmp6_solicited icmp6_dataun.u_nd_advt.solicited -#define icmp6_override icmp6_dataun.u_nd_advt.override -#define icmp6_ndiscreserved icmp6_dataun.u_nd_advt.reserved -#define icmp6_hop_limit icmp6_dataun.u_nd_ra.hop_limit -#define icmp6_addrconf_managed icmp6_dataun.u_nd_ra.managed -#define icmp6_addrconf_other icmp6_dataun.u_nd_ra.other -#define icmp6_rt_lifetime icmp6_dataun.u_nd_ra.rt_lifetime -#define icmp6_router_pref icmp6_dataun.u_nd_ra.router_pref -}; - -#ifdef __KERNEL__ #include <linux/skbuff.h> +#include <uapi/linux/icmpv6.h> static inline struct icmp6hdr *icmp6_hdr(const struct sk_buff *skb) { return (struct icmp6hdr *)skb_transport_header(skb); } -#endif - -#define ICMPV6_ROUTER_PREF_LOW 0x3 -#define ICMPV6_ROUTER_PREF_MEDIUM 0x0 -#define ICMPV6_ROUTER_PREF_HIGH 0x1 -#define ICMPV6_ROUTER_PREF_INVALID 0x2 - -#define ICMPV6_DEST_UNREACH 1 -#define ICMPV6_PKT_TOOBIG 2 -#define ICMPV6_TIME_EXCEED 3 -#define ICMPV6_PARAMPROB 4 - -#define ICMPV6_INFOMSG_MASK 0x80 - -#define ICMPV6_ECHO_REQUEST 128 -#define ICMPV6_ECHO_REPLY 129 -#define ICMPV6_MGM_QUERY 130 -#define ICMPV6_MGM_REPORT 131 -#define ICMPV6_MGM_REDUCTION 132 - -#define ICMPV6_NI_QUERY 139 -#define ICMPV6_NI_REPLY 140 - -#define ICMPV6_MLD2_REPORT 143 - -#define ICMPV6_DHAAD_REQUEST 144 -#define ICMPV6_DHAAD_REPLY 145 -#define ICMPV6_MOBILE_PREFIX_SOL 146 -#define ICMPV6_MOBILE_PREFIX_ADV 147 - -/* - * Codes for Destination Unreachable - */ -#define ICMPV6_NOROUTE 0 -#define ICMPV6_ADM_PROHIBITED 1 -#define ICMPV6_NOT_NEIGHBOUR 2 -#define ICMPV6_ADDR_UNREACH 3 -#define ICMPV6_PORT_UNREACH 4 - -/* - * Codes for Time Exceeded - */ -#define ICMPV6_EXC_HOPLIMIT 0 -#define ICMPV6_EXC_FRAGTIME 1 - -/* - * Codes for Parameter Problem - */ -#define ICMPV6_HDR_FIELD 0 -#define ICMPV6_UNK_NEXTHDR 1 -#define ICMPV6_UNK_OPTION 2 - -/* - * constants for (set|get)sockopt - */ - -#define ICMPV6_FILTER 1 - -/* - * ICMPV6 filter - */ - -#define ICMPV6_FILTER_BLOCK 1 -#define ICMPV6_FILTER_PASS 2 -#define ICMPV6_FILTER_BLOCKOTHERS 3 -#define ICMPV6_FILTER_PASSONLY 4 - -struct icmp6_filter { - __u32 data[8]; -}; - -/* - * Definitions for MLDv2 - */ -#define MLD2_MODE_IS_INCLUDE 1 -#define MLD2_MODE_IS_EXCLUDE 2 -#define MLD2_CHANGE_TO_INCLUDE 3 -#define MLD2_CHANGE_TO_EXCLUDE 4 -#define MLD2_ALLOW_NEW_SOURCES 5 -#define MLD2_BLOCK_OLD_SOURCES 6 - -#define MLD2_ALL_MCR_INIT { { { 0xff,0x02,0,0,0,0,0,0,0,0,0,0,0,0,0,0x16 } } } - -#ifdef __KERNEL__ #include <linux/netdevice.h> @@ -192,5 +31,3 @@ extern void icmpv6_flow_init(struct sock *sk, const struct in6_addr *daddr, int oif); #endif - -#endif diff --git a/include/linux/if_arp.h b/include/linux/if_arp.h index 9adcc29f084a..89b4614a4722 100644 --- a/include/linux/if_arp.h +++ b/include/linux/if_arp.h @@ -23,140 +23,8 @@ #ifndef _LINUX_IF_ARP_H #define _LINUX_IF_ARP_H -#include <linux/netdevice.h> - -/* ARP protocol HARDWARE identifiers. */ -#define ARPHRD_NETROM 0 /* from KA9Q: NET/ROM pseudo */ -#define ARPHRD_ETHER 1 /* Ethernet 10Mbps */ -#define ARPHRD_EETHER 2 /* Experimental Ethernet */ -#define ARPHRD_AX25 3 /* AX.25 Level 2 */ -#define ARPHRD_PRONET 4 /* PROnet token ring */ -#define ARPHRD_CHAOS 5 /* Chaosnet */ -#define ARPHRD_IEEE802 6 /* IEEE 802.2 Ethernet/TR/TB */ -#define ARPHRD_ARCNET 7 /* ARCnet */ -#define ARPHRD_APPLETLK 8 /* APPLEtalk */ -#define ARPHRD_DLCI 15 /* Frame Relay DLCI */ -#define ARPHRD_ATM 19 /* ATM */ -#define ARPHRD_METRICOM 23 /* Metricom STRIP (new IANA id) */ -#define ARPHRD_IEEE1394 24 /* IEEE 1394 IPv4 - RFC 2734 */ -#define ARPHRD_EUI64 27 /* EUI-64 */ -#define ARPHRD_INFINIBAND 32 /* InfiniBand */ - -/* Dummy types for non ARP hardware */ -#define ARPHRD_SLIP 256 -#define ARPHRD_CSLIP 257 -#define ARPHRD_SLIP6 258 -#define ARPHRD_CSLIP6 259 -#define ARPHRD_RSRVD 260 /* Notional KISS type */ -#define ARPHRD_ADAPT 264 -#define ARPHRD_ROSE 270 -#define ARPHRD_X25 271 /* CCITT X.25 */ -#define ARPHRD_HWX25 272 /* Boards with X.25 in firmware */ -#define ARPHRD_CAN 280 /* Controller Area Network */ -#define ARPHRD_PPP 512 -#define ARPHRD_CISCO 513 /* Cisco HDLC */ -#define ARPHRD_HDLC ARPHRD_CISCO -#define ARPHRD_LAPB 516 /* LAPB */ -#define ARPHRD_DDCMP 517 /* Digital's DDCMP protocol */ -#define ARPHRD_RAWHDLC 518 /* Raw HDLC */ - -#define ARPHRD_TUNNEL 768 /* IPIP tunnel */ -#define ARPHRD_TUNNEL6 769 /* IP6IP6 tunnel */ -#define ARPHRD_FRAD 770 /* Frame Relay Access Device */ -#define ARPHRD_SKIP 771 /* SKIP vif */ -#define ARPHRD_LOOPBACK 772 /* Loopback device */ -#define ARPHRD_LOCALTLK 773 /* Localtalk device */ -#define ARPHRD_FDDI 774 /* Fiber Distributed Data Interface */ -#define ARPHRD_BIF 775 /* AP1000 BIF */ -#define ARPHRD_SIT 776 /* sit0 device - IPv6-in-IPv4 */ -#define ARPHRD_IPDDP 777 /* IP over DDP tunneller */ -#define ARPHRD_IPGRE 778 /* GRE over IP */ -#define ARPHRD_PIMREG 779 /* PIMSM register interface */ -#define ARPHRD_HIPPI 780 /* High Performance Parallel Interface */ -#define ARPHRD_ASH 781 /* Nexus 64Mbps Ash */ -#define ARPHRD_ECONET 782 /* Acorn Econet */ -#define ARPHRD_IRDA 783 /* Linux-IrDA */ -/* ARP works differently on different FC media .. so */ -#define ARPHRD_FCPP 784 /* Point to point fibrechannel */ -#define ARPHRD_FCAL 785 /* Fibrechannel arbitrated loop */ -#define ARPHRD_FCPL 786 /* Fibrechannel public loop */ -#define ARPHRD_FCFABRIC 787 /* Fibrechannel fabric */ - /* 787->799 reserved for fibrechannel media types */ -#define ARPHRD_IEEE802_TR 800 /* Magic type ident for TR */ -#define ARPHRD_IEEE80211 801 /* IEEE 802.11 */ -#define ARPHRD_IEEE80211_PRISM 802 /* IEEE 802.11 + Prism2 header */ -#define ARPHRD_IEEE80211_RADIOTAP 803 /* IEEE 802.11 + radiotap header */ -#define ARPHRD_IEEE802154 804 -#define ARPHRD_IEEE802154_MONITOR 805 /* IEEE 802.15.4 network monitor */ - -#define ARPHRD_PHONET 820 /* PhoNet media type */ -#define ARPHRD_PHONET_PIPE 821 /* PhoNet pipe header */ -#define ARPHRD_CAIF 822 /* CAIF media type */ -#define ARPHRD_IP6GRE 823 /* GRE over IPv6 */ - -#define ARPHRD_VOID 0xFFFF /* Void type, nothing is known */ -#define ARPHRD_NONE 0xFFFE /* zero header length */ - -/* ARP protocol opcodes. */ -#define ARPOP_REQUEST 1 /* ARP request */ -#define ARPOP_REPLY 2 /* ARP reply */ -#define ARPOP_RREQUEST 3 /* RARP request */ -#define ARPOP_RREPLY 4 /* RARP reply */ -#define ARPOP_InREQUEST 8 /* InARP request */ -#define ARPOP_InREPLY 9 /* InARP reply */ -#define ARPOP_NAK 10 /* (ATM)ARP NAK */ - - -/* ARP ioctl request. */ -struct arpreq { - struct sockaddr arp_pa; /* protocol address */ - struct sockaddr arp_ha; /* hardware address */ - int arp_flags; /* flags */ - struct sockaddr arp_netmask; /* netmask (only for proxy arps) */ - char arp_dev[16]; -}; - -struct arpreq_old { - struct sockaddr arp_pa; /* protocol address */ - struct sockaddr arp_ha; /* hardware address */ - int arp_flags; /* flags */ - struct sockaddr arp_netmask; /* netmask (only for proxy arps) */ -}; - -/* ARP Flag values. */ -#define ATF_COM 0x02 /* completed entry (ha valid) */ -#define ATF_PERM 0x04 /* permanent entry */ -#define ATF_PUBL 0x08 /* publish entry */ -#define ATF_USETRAILERS 0x10 /* has requested trailers */ -#define ATF_NETMASK 0x20 /* want to use a netmask (only - for proxy entries) */ -#define ATF_DONTPUB 0x40 /* don't answer this addresses */ - -/* - * This structure defines an ethernet arp header. - */ - -struct arphdr { - __be16 ar_hrd; /* format of hardware address */ - __be16 ar_pro; /* format of protocol address */ - unsigned char ar_hln; /* length of hardware address */ - unsigned char ar_pln; /* length of protocol address */ - __be16 ar_op; /* ARP opcode (command) */ - -#if 0 - /* - * Ethernet looks like this : This bit is variable sized however... - */ - unsigned char ar_sha[ETH_ALEN]; /* sender hardware address */ - unsigned char ar_sip[4]; /* sender IP address */ - unsigned char ar_tha[ETH_ALEN]; /* target hardware address */ - unsigned char ar_tip[4]; /* target IP address */ -#endif - -}; - -#ifdef __KERNEL__ #include <linux/skbuff.h> +#include <uapi/linux/if_arp.h> static inline struct arphdr *arp_hdr(const struct sk_buff *skb) { @@ -168,6 +36,4 @@ static inline int arp_hdr_len(struct net_device *dev) /* ARP header, plus 2 device addresses, plus 2 IP addresses. */ return sizeof(struct arphdr) + (dev->addr_len + sizeof(u32)) * 2; } -#endif - #endif /* _LINUX_IF_ARP_H */ diff --git a/include/linux/if_bridge.h b/include/linux/if_bridge.h index dd3f20139640..1085ffeef956 100644 --- a/include/linux/if_bridge.h +++ b/include/linux/if_bridge.h @@ -9,97 +9,12 @@ * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. */ - #ifndef _LINUX_IF_BRIDGE_H #define _LINUX_IF_BRIDGE_H -#include <linux/types.h> - -#define SYSFS_BRIDGE_ATTR "bridge" -#define SYSFS_BRIDGE_FDB "brforward" -#define SYSFS_BRIDGE_PORT_SUBDIR "brif" -#define SYSFS_BRIDGE_PORT_ATTR "brport" -#define SYSFS_BRIDGE_PORT_LINK "bridge" - -#define BRCTL_VERSION 1 - -#define BRCTL_GET_VERSION 0 -#define BRCTL_GET_BRIDGES 1 -#define BRCTL_ADD_BRIDGE 2 -#define BRCTL_DEL_BRIDGE 3 -#define BRCTL_ADD_IF 4 -#define BRCTL_DEL_IF 5 -#define BRCTL_GET_BRIDGE_INFO 6 -#define BRCTL_GET_PORT_LIST 7 -#define BRCTL_SET_BRIDGE_FORWARD_DELAY 8 -#define BRCTL_SET_BRIDGE_HELLO_TIME 9 -#define BRCTL_SET_BRIDGE_MAX_AGE 10 -#define BRCTL_SET_AGEING_TIME 11 -#define BRCTL_SET_GC_INTERVAL 12 -#define BRCTL_GET_PORT_INFO 13 -#define BRCTL_SET_BRIDGE_STP_STATE 14 -#define BRCTL_SET_BRIDGE_PRIORITY 15 -#define BRCTL_SET_PORT_PRIORITY 16 -#define BRCTL_SET_PATH_COST 17 -#define BRCTL_GET_FDB_ENTRIES 18 - -#define BR_STATE_DISABLED 0 -#define BR_STATE_LISTENING 1 -#define BR_STATE_LEARNING 2 -#define BR_STATE_FORWARDING 3 -#define BR_STATE_BLOCKING 4 - -struct __bridge_info { - __u64 designated_root; - __u64 bridge_id; - __u32 root_path_cost; - __u32 max_age; - __u32 hello_time; - __u32 forward_delay; - __u32 bridge_max_age; - __u32 bridge_hello_time; - __u32 bridge_forward_delay; - __u8 topology_change; - __u8 topology_change_detected; - __u8 root_port; - __u8 stp_enabled; - __u32 ageing_time; - __u32 gc_interval; - __u32 hello_timer_value; - __u32 tcn_timer_value; - __u32 topology_change_timer_value; - __u32 gc_timer_value; -}; - -struct __port_info { - __u64 designated_root; - __u64 designated_bridge; - __u16 port_id; - __u16 designated_port; - __u32 path_cost; - __u32 designated_cost; - __u8 state; - __u8 top_change_ack; - __u8 config_pending; - __u8 unused0; - __u32 message_age_timer_value; - __u32 forward_delay_timer_value; - __u32 hold_timer_value; -}; - -struct __fdb_entry { - __u8 mac_addr[6]; - __u8 port_no; - __u8 is_local; - __u32 ageing_timer_value; - __u8 port_hi; - __u8 pad0; - __u16 unused; -}; - -#ifdef __KERNEL__ #include <linux/netdevice.h> +#include <uapi/linux/if_bridge.h> extern void brioctl_set(int (*ioctl_hook)(struct net *, unsigned int, void __user *)); @@ -107,5 +22,3 @@ typedef int br_should_route_hook_t(struct sk_buff *skb); extern br_should_route_hook_t __rcu *br_should_route_hook; #endif - -#endif diff --git a/include/linux/if_eql.h b/include/linux/if_eql.h index 18a5d02a8644..d984694c384d 100644 --- a/include/linux/if_eql.h +++ b/include/linux/if_eql.h @@ -15,28 +15,13 @@ * McLean VA 22101 * Phone: 1-703-847-0040 ext 103 */ - #ifndef _LINUX_IF_EQL_H #define _LINUX_IF_EQL_H -#define EQL_DEFAULT_SLAVE_PRIORITY 28800 -#define EQL_DEFAULT_MAX_SLAVES 4 -#define EQL_DEFAULT_MTU 576 -#define EQL_DEFAULT_RESCHED_IVAL HZ - -#define EQL_ENSLAVE (SIOCDEVPRIVATE) -#define EQL_EMANCIPATE (SIOCDEVPRIVATE + 1) - -#define EQL_GETSLAVECFG (SIOCDEVPRIVATE + 2) -#define EQL_SETSLAVECFG (SIOCDEVPRIVATE + 3) - -#define EQL_GETMASTRCFG (SIOCDEVPRIVATE + 4) -#define EQL_SETMASTRCFG (SIOCDEVPRIVATE + 5) - -#ifdef __KERNEL__ #include <linux/timer.h> #include <linux/spinlock.h> +#include <uapi/linux/if_eql.h> typedef struct slave { struct list_head list; @@ -61,23 +46,4 @@ typedef struct equalizer { struct timer_list timer; } equalizer_t; -#endif /* __KERNEL__ */ - -typedef struct master_config { - char master_name[16]; - int max_slaves; - int min_slaves; -} master_config_t; - -typedef struct slave_config { - char slave_name[16]; - long priority; -} slave_config_t; - -typedef struct slaving_request { - char slave_name[16]; - long priority; -} slaving_request_t; - - #endif /* _LINUX_EQL_H */ diff --git a/include/linux/if_ether.h b/include/linux/if_ether.h index 167ce5b363d2..12b4d55a02af 100644 --- a/include/linux/if_ether.h +++ b/include/linux/if_ether.h @@ -17,122 +17,11 @@ * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. */ - #ifndef _LINUX_IF_ETHER_H #define _LINUX_IF_ETHER_H -#include <linux/types.h> - -/* - * IEEE 802.3 Ethernet magic constants. The frame sizes omit the preamble - * and FCS/CRC (frame check sequence). - */ - -#define ETH_ALEN 6 /* Octets in one ethernet addr */ -#define ETH_HLEN 14 /* Total octets in header. */ -#define ETH_ZLEN 60 /* Min. octets in frame sans FCS */ -#define ETH_DATA_LEN 1500 /* Max. octets in payload */ -#define ETH_FRAME_LEN 1514 /* Max. octets in frame sans FCS */ -#define ETH_FCS_LEN 4 /* Octets in the FCS */ - -/* - * These are the defined Ethernet Protocol ID's. - */ - -#define ETH_P_LOOP 0x0060 /* Ethernet Loopback packet */ -#define ETH_P_PUP 0x0200 /* Xerox PUP packet */ -#define ETH_P_PUPAT 0x0201 /* Xerox PUP Addr Trans packet */ -#define ETH_P_IP 0x0800 /* Internet Protocol packet */ -#define ETH_P_X25 0x0805 /* CCITT X.25 */ -#define ETH_P_ARP 0x0806 /* Address Resolution packet */ -#define ETH_P_BPQ 0x08FF /* G8BPQ AX.25 Ethernet Packet [ NOT AN OFFICIALLY REGISTERED ID ] */ -#define ETH_P_IEEEPUP 0x0a00 /* Xerox IEEE802.3 PUP packet */ -#define ETH_P_IEEEPUPAT 0x0a01 /* Xerox IEEE802.3 PUP Addr Trans packet */ -#define ETH_P_DEC 0x6000 /* DEC Assigned proto */ -#define ETH_P_DNA_DL 0x6001 /* DEC DNA Dump/Load */ -#define ETH_P_DNA_RC 0x6002 /* DEC DNA Remote Console */ -#define ETH_P_DNA_RT 0x6003 /* DEC DNA Routing */ -#define ETH_P_LAT 0x6004 /* DEC LAT */ -#define ETH_P_DIAG 0x6005 /* DEC Diagnostics */ -#define ETH_P_CUST 0x6006 /* DEC Customer use */ -#define ETH_P_SCA 0x6007 /* DEC Systems Comms Arch */ -#define ETH_P_TEB 0x6558 /* Trans Ether Bridging */ -#define ETH_P_RARP 0x8035 /* Reverse Addr Res packet */ -#define ETH_P_ATALK 0x809B /* Appletalk DDP */ -#define ETH_P_AARP 0x80F3 /* Appletalk AARP */ -#define ETH_P_8021Q 0x8100 /* 802.1Q VLAN Extended Header */ -#define ETH_P_IPX 0x8137 /* IPX over DIX */ -#define ETH_P_IPV6 0x86DD /* IPv6 over bluebook */ -#define ETH_P_PAUSE 0x8808 /* IEEE Pause frames. See 802.3 31B */ -#define ETH_P_SLOW 0x8809 /* Slow Protocol. See 802.3ad 43B */ -#define ETH_P_WCCP 0x883E /* Web-cache coordination protocol - * defined in draft-wilson-wrec-wccp-v2-00.txt */ -#define ETH_P_PPP_DISC 0x8863 /* PPPoE discovery messages */ -#define ETH_P_PPP_SES 0x8864 /* PPPoE session messages */ -#define ETH_P_MPLS_UC 0x8847 /* MPLS Unicast traffic */ -#define ETH_P_MPLS_MC 0x8848 /* MPLS Multicast traffic */ -#define ETH_P_ATMMPOA 0x884c /* MultiProtocol Over ATM */ -#define ETH_P_LINK_CTL 0x886c /* HPNA, wlan link local tunnel */ -#define ETH_P_ATMFATE 0x8884 /* Frame-based ATM Transport - * over Ethernet - */ -#define ETH_P_PAE 0x888E /* Port Access Entity (IEEE 802.1X) */ -#define ETH_P_AOE 0x88A2 /* ATA over Ethernet */ -#define ETH_P_8021AD 0x88A8 /* 802.1ad Service VLAN */ -#define ETH_P_802_EX1 0x88B5 /* 802.1 Local Experimental 1. */ -#define ETH_P_TIPC 0x88CA /* TIPC */ -#define ETH_P_8021AH 0x88E7 /* 802.1ah Backbone Service Tag */ -#define ETH_P_1588 0x88F7 /* IEEE 1588 Timesync */ -#define ETH_P_FCOE 0x8906 /* Fibre Channel over Ethernet */ -#define ETH_P_TDLS 0x890D /* TDLS */ -#define ETH_P_FIP 0x8914 /* FCoE Initialization Protocol */ -#define ETH_P_QINQ1 0x9100 /* deprecated QinQ VLAN [ NOT AN OFFICIALLY REGISTERED ID ] */ -#define ETH_P_QINQ2 0x9200 /* deprecated QinQ VLAN [ NOT AN OFFICIALLY REGISTERED ID ] */ -#define ETH_P_QINQ3 0x9300 /* deprecated QinQ VLAN [ NOT AN OFFICIALLY REGISTERED ID ] */ -#define ETH_P_EDSA 0xDADA /* Ethertype DSA [ NOT AN OFFICIALLY REGISTERED ID ] */ -#define ETH_P_AF_IUCV 0xFBFB /* IBM af_iucv [ NOT AN OFFICIALLY REGISTERED ID ] */ - -/* - * Non DIX types. Won't clash for 1500 types. - */ - -#define ETH_P_802_3 0x0001 /* Dummy type for 802.3 frames */ -#define ETH_P_AX25 0x0002 /* Dummy protocol id for AX.25 */ -#define ETH_P_ALL 0x0003 /* Every packet (be careful!!!) */ -#define ETH_P_802_2 0x0004 /* 802.2 frames */ -#define ETH_P_SNAP 0x0005 /* Internal only */ -#define ETH_P_DDCMP 0x0006 /* DEC DDCMP: Internal only */ -#define ETH_P_WAN_PPP 0x0007 /* Dummy type for WAN PPP frames*/ -#define ETH_P_PPP_MP 0x0008 /* Dummy type for PPP MP frames */ -#define ETH_P_LOCALTALK 0x0009 /* Localtalk pseudo type */ -#define ETH_P_CAN 0x000C /* CAN: Controller Area Network */ -#define ETH_P_CANFD 0x000D /* CANFD: CAN flexible data rate*/ -#define ETH_P_PPPTALK 0x0010 /* Dummy type for Atalk over PPP*/ -#define ETH_P_TR_802_2 0x0011 /* 802.2 frames */ -#define ETH_P_MOBITEX 0x0015 /* Mobitex (kaz@cafe.net) */ -#define ETH_P_CONTROL 0x0016 /* Card specific control frames */ -#define ETH_P_IRDA 0x0017 /* Linux-IrDA */ -#define ETH_P_ECONET 0x0018 /* Acorn Econet */ -#define ETH_P_HDLC 0x0019 /* HDLC frames */ -#define ETH_P_ARCNET 0x001A /* 1A for ArcNet :-) */ -#define ETH_P_DSA 0x001B /* Distributed Switch Arch. */ -#define ETH_P_TRAILER 0x001C /* Trailer switch tagging */ -#define ETH_P_PHONET 0x00F5 /* Nokia Phonet frames */ -#define ETH_P_IEEE802154 0x00F6 /* IEEE802.15.4 frame */ -#define ETH_P_CAIF 0x00F7 /* ST-Ericsson CAIF protocol */ - -/* - * This is an Ethernet frame header. - */ - -struct ethhdr { - unsigned char h_dest[ETH_ALEN]; /* destination eth addr */ - unsigned char h_source[ETH_ALEN]; /* source ether addr */ - __be16 h_proto; /* packet type ID field */ -} __attribute__((packed)); - -#ifdef __KERNEL__ #include <linux/skbuff.h> +#include <uapi/linux/if_ether.h> static inline struct ethhdr *eth_hdr(const struct sk_buff *skb) { @@ -144,6 +33,4 @@ int eth_header_parse(const struct sk_buff *skb, unsigned char *haddr); int mac_pton(const char *s, u8 *mac); extern ssize_t sysfs_format_mac(char *buf, const unsigned char *addr, int len); -#endif - #endif /* _LINUX_IF_ETHER_H */ diff --git a/include/linux/if_fddi.h b/include/linux/if_fddi.h index e6dc11e7f9a5..f5550b3eeeab 100644 --- a/include/linux/if_fddi.h +++ b/include/linux/if_fddi.h @@ -24,84 +24,8 @@ #ifndef _LINUX_IF_FDDI_H #define _LINUX_IF_FDDI_H -#include <linux/types.h> - -/* - * Define max and min legal sizes. The frame sizes do not include - * 4 byte FCS/CRC (frame check sequence). - */ -#define FDDI_K_ALEN 6 /* Octets in one FDDI address */ -#define FDDI_K_8022_HLEN 16 /* Total octets in 802.2 header */ -#define FDDI_K_SNAP_HLEN 21 /* Total octets in 802.2 SNAP header */ -#define FDDI_K_8022_ZLEN 16 /* Min octets in 802.2 frame sans FCS */ -#define FDDI_K_SNAP_ZLEN 21 /* Min octets in 802.2 SNAP frame sans FCS */ -#define FDDI_K_8022_DLEN 4475 /* Max octets in 802.2 payload */ -#define FDDI_K_SNAP_DLEN 4470 /* Max octets in 802.2 SNAP payload */ -#define FDDI_K_LLC_ZLEN 13 /* Min octets in LLC frame sans FCS */ -#define FDDI_K_LLC_LEN 4491 /* Max octets in LLC frame sans FCS */ - -/* Define FDDI Frame Control (FC) Byte values */ -#define FDDI_FC_K_VOID 0x00 -#define FDDI_FC_K_NON_RESTRICTED_TOKEN 0x80 -#define FDDI_FC_K_RESTRICTED_TOKEN 0xC0 -#define FDDI_FC_K_SMT_MIN 0x41 -#define FDDI_FC_K_SMT_MAX 0x4F -#define FDDI_FC_K_MAC_MIN 0xC1 -#define FDDI_FC_K_MAC_MAX 0xCF -#define FDDI_FC_K_ASYNC_LLC_MIN 0x50 -#define FDDI_FC_K_ASYNC_LLC_DEF 0x54 -#define FDDI_FC_K_ASYNC_LLC_MAX 0x5F -#define FDDI_FC_K_SYNC_LLC_MIN 0xD0 -#define FDDI_FC_K_SYNC_LLC_MAX 0xD7 -#define FDDI_FC_K_IMPLEMENTOR_MIN 0x60 -#define FDDI_FC_K_IMPLEMENTOR_MAX 0x6F -#define FDDI_FC_K_RESERVED_MIN 0x70 -#define FDDI_FC_K_RESERVED_MAX 0x7F - -/* Define LLC and SNAP constants */ -#define FDDI_EXTENDED_SAP 0xAA -#define FDDI_UI_CMD 0x03 - -/* Define 802.2 Type 1 header */ -struct fddi_8022_1_hdr { - __u8 dsap; /* destination service access point */ - __u8 ssap; /* source service access point */ - __u8 ctrl; /* control byte #1 */ -} __attribute__((packed)); - -/* Define 802.2 Type 2 header */ -struct fddi_8022_2_hdr { - __u8 dsap; /* destination service access point */ - __u8 ssap; /* source service access point */ - __u8 ctrl_1; /* control byte #1 */ - __u8 ctrl_2; /* control byte #2 */ -} __attribute__((packed)); - -/* Define 802.2 SNAP header */ -#define FDDI_K_OUI_LEN 3 -struct fddi_snap_hdr { - __u8 dsap; /* always 0xAA */ - __u8 ssap; /* always 0xAA */ - __u8 ctrl; /* always 0x03 */ - __u8 oui[FDDI_K_OUI_LEN]; /* organizational universal id */ - __be16 ethertype; /* packet type ID field */ -} __attribute__((packed)); - -/* Define FDDI LLC frame header */ -struct fddihdr { - __u8 fc; /* frame control */ - __u8 daddr[FDDI_K_ALEN]; /* destination address */ - __u8 saddr[FDDI_K_ALEN]; /* source address */ - union - { - struct fddi_8022_1_hdr llc_8022_1; - struct fddi_8022_2_hdr llc_8022_2; - struct fddi_snap_hdr llc_snap; - } hdr; -} __attribute__((packed)); - -#ifdef __KERNEL__ #include <linux/netdevice.h> +#include <uapi/linux/if_fddi.h> /* Define FDDI statistics structure */ struct fddi_statistics { @@ -194,6 +118,4 @@ struct fddi_statistics { __u32 port_ler_flag[2]; __u32 port_hardware_present[2]; }; -#endif /* __KERNEL__ */ - #endif /* _LINUX_IF_FDDI_H */ diff --git a/include/linux/if_frad.h b/include/linux/if_frad.h index 191ee0869bc1..4316aa173dde 100644 --- a/include/linux/if_frad.h +++ b/include/linux/if_frad.h @@ -20,105 +20,11 @@ * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. */ - #ifndef _FRAD_H_ #define _FRAD_H_ -#include <linux/if.h> - -/* Structures and constants associated with the DLCI device driver */ - -struct dlci_add -{ - char devname[IFNAMSIZ]; - short dlci; -}; - -#define DLCI_GET_CONF (SIOCDEVPRIVATE + 2) -#define DLCI_SET_CONF (SIOCDEVPRIVATE + 3) - -/* - * These are related to the Sangoma SDLA and should remain in order. - * Code within the SDLA module is based on the specifics of this - * structure. Change at your own peril. - */ -struct dlci_conf { - short flags; - short CIR_fwd; - short Bc_fwd; - short Be_fwd; - short CIR_bwd; - short Bc_bwd; - short Be_bwd; - -/* these are part of the status read */ - short Tc_fwd; - short Tc_bwd; - short Tf_max; - short Tb_max; - -/* add any new fields here above is a mirror of sdla_dlci_conf */ -}; - -#define DLCI_GET_SLAVE (SIOCDEVPRIVATE + 4) - -/* configuration flags for DLCI */ -#define DLCI_IGNORE_CIR_OUT 0x0001 -#define DLCI_ACCOUNT_CIR_IN 0x0002 -#define DLCI_BUFFER_IF 0x0008 - -#define DLCI_VALID_FLAGS 0x000B +#include <uapi/linux/if_frad.h> -/* defines for the actual Frame Relay hardware */ -#define FRAD_GET_CONF (SIOCDEVPRIVATE) -#define FRAD_SET_CONF (SIOCDEVPRIVATE + 1) - -#define FRAD_LAST_IOCTL FRAD_SET_CONF - -/* - * Based on the setup for the Sangoma SDLA. If changes are - * necessary to this structure, a routine will need to be - * added to that module to copy fields. - */ -struct frad_conf -{ - short station; - short flags; - short kbaud; - short clocking; - short mtu; - short T391; - short T392; - short N391; - short N392; - short N393; - short CIR_fwd; - short Bc_fwd; - short Be_fwd; - short CIR_bwd; - short Bc_bwd; - short Be_bwd; - -/* Add new fields here, above is a mirror of the sdla_conf */ - -}; - -#define FRAD_STATION_CPE 0x0000 -#define FRAD_STATION_NODE 0x0001 - -#define FRAD_TX_IGNORE_CIR 0x0001 -#define FRAD_RX_ACCOUNT_CIR 0x0002 -#define FRAD_DROP_ABORTED 0x0004 -#define FRAD_BUFFERIF 0x0008 -#define FRAD_STATS 0x0010 -#define FRAD_MCI 0x0100 -#define FRAD_AUTODLCI 0x8000 -#define FRAD_VALID_FLAGS 0x811F - -#define FRAD_CLOCK_INT 0x0001 -#define FRAD_CLOCK_EXT 0x0000 - -#ifdef __KERNEL__ #if defined(CONFIG_DLCI) || defined(CONFIG_DLCI_MODULE) @@ -188,6 +94,4 @@ struct frad_local extern void dlci_ioctl_set(int (*hook)(unsigned int, void __user *)); -#endif /* __KERNEL__ */ - #endif diff --git a/include/linux/if_link.h b/include/linux/if_link.h index 3265f332998a..c3f817c3eb45 100644 --- a/include/linux/if_link.h +++ b/include/linux/if_link.h @@ -1,341 +1,8 @@ #ifndef _LINUX_IF_LINK_H #define _LINUX_IF_LINK_H -#include <linux/types.h> -#include <linux/netlink.h> +#include <uapi/linux/if_link.h> -/* This struct should be in sync with struct rtnl_link_stats64 */ -struct rtnl_link_stats { - __u32 rx_packets; /* total packets received */ - __u32 tx_packets; /* total packets transmitted */ - __u32 rx_bytes; /* total bytes received */ - __u32 tx_bytes; /* total bytes transmitted */ - __u32 rx_errors; /* bad packets received */ - __u32 tx_errors; /* packet transmit problems */ - __u32 rx_dropped; /* no space in linux buffers */ - __u32 tx_dropped; /* no space available in linux */ - __u32 multicast; /* multicast packets received */ - __u32 collisions; - - /* detailed rx_errors: */ - __u32 rx_length_errors; - __u32 rx_over_errors; /* receiver ring buff overflow */ - __u32 rx_crc_errors; /* recved pkt with crc error */ - __u32 rx_frame_errors; /* recv'd frame alignment error */ - __u32 rx_fifo_errors; /* recv'r fifo overrun */ - __u32 rx_missed_errors; /* receiver missed packet */ - - /* detailed tx_errors */ - __u32 tx_aborted_errors; - __u32 tx_carrier_errors; - __u32 tx_fifo_errors; - __u32 tx_heartbeat_errors; - __u32 tx_window_errors; - - /* for cslip etc */ - __u32 rx_compressed; - __u32 tx_compressed; -}; - -/* The main device statistics structure */ -struct rtnl_link_stats64 { - __u64 rx_packets; /* total packets received */ - __u64 tx_packets; /* total packets transmitted */ - __u64 rx_bytes; /* total bytes received */ - __u64 tx_bytes; /* total bytes transmitted */ - __u64 rx_errors; /* bad packets received */ - __u64 tx_errors; /* packet transmit problems */ - __u64 rx_dropped; /* no space in linux buffers */ - __u64 tx_dropped; /* no space available in linux */ - __u64 multicast; /* multicast packets received */ - __u64 collisions; - - /* detailed rx_errors: */ - __u64 rx_length_errors; - __u64 rx_over_errors; /* receiver ring buff overflow */ - __u64 rx_crc_errors; /* recved pkt with crc error */ - __u64 rx_frame_errors; /* recv'd frame alignment error */ - __u64 rx_fifo_errors; /* recv'r fifo overrun */ - __u64 rx_missed_errors; /* receiver missed packet */ - - /* detailed tx_errors */ - __u64 tx_aborted_errors; - __u64 tx_carrier_errors; - __u64 tx_fifo_errors; - __u64 tx_heartbeat_errors; - __u64 tx_window_errors; - - /* for cslip etc */ - __u64 rx_compressed; - __u64 tx_compressed; -}; - -/* The struct should be in sync with struct ifmap */ -struct rtnl_link_ifmap { - __u64 mem_start; - __u64 mem_end; - __u64 base_addr; - __u16 irq; - __u8 dma; - __u8 port; -}; - -/* - * IFLA_AF_SPEC - * Contains nested attributes for address family specific attributes. - * Each address family may create a attribute with the address family - * number as type and create its own attribute structure in it. - * - * Example: - * [IFLA_AF_SPEC] = { - * [AF_INET] = { - * [IFLA_INET_CONF] = ..., - * }, - * [AF_INET6] = { - * [IFLA_INET6_FLAGS] = ..., - * [IFLA_INET6_CONF] = ..., - * } - * } - */ - -enum { - IFLA_UNSPEC, - IFLA_ADDRESS, - IFLA_BROADCAST, - IFLA_IFNAME, - IFLA_MTU, - IFLA_LINK, - IFLA_QDISC, - IFLA_STATS, - IFLA_COST, -#define IFLA_COST IFLA_COST - IFLA_PRIORITY, -#define IFLA_PRIORITY IFLA_PRIORITY - IFLA_MASTER, -#define IFLA_MASTER IFLA_MASTER - IFLA_WIRELESS, /* Wireless Extension event - see wireless.h */ -#define IFLA_WIRELESS IFLA_WIRELESS - IFLA_PROTINFO, /* Protocol specific information for a link */ -#define IFLA_PROTINFO IFLA_PROTINFO - IFLA_TXQLEN, -#define IFLA_TXQLEN IFLA_TXQLEN - IFLA_MAP, -#define IFLA_MAP IFLA_MAP - IFLA_WEIGHT, -#define IFLA_WEIGHT IFLA_WEIGHT - IFLA_OPERSTATE, - IFLA_LINKMODE, - IFLA_LINKINFO, -#define IFLA_LINKINFO IFLA_LINKINFO - IFLA_NET_NS_PID, - IFLA_IFALIAS, - IFLA_NUM_VF, /* Number of VFs if device is SR-IOV PF */ - IFLA_VFINFO_LIST, - IFLA_STATS64, - IFLA_VF_PORTS, - IFLA_PORT_SELF, - IFLA_AF_SPEC, - IFLA_GROUP, /* Group the device belongs to */ - IFLA_NET_NS_FD, - IFLA_EXT_MASK, /* Extended info mask, VFs, etc */ - IFLA_PROMISCUITY, /* Promiscuity count: > 0 means acts PROMISC */ -#define IFLA_PROMISCUITY IFLA_PROMISCUITY - IFLA_NUM_TX_QUEUES, - IFLA_NUM_RX_QUEUES, - __IFLA_MAX -}; - - -#define IFLA_MAX (__IFLA_MAX - 1) - -/* backwards compatibility for userspace */ -#ifndef __KERNEL__ -#define IFLA_RTA(r) ((struct rtattr*)(((char*)(r)) + NLMSG_ALIGN(sizeof(struct ifinfomsg)))) -#define IFLA_PAYLOAD(n) NLMSG_PAYLOAD(n,sizeof(struct ifinfomsg)) -#endif - -enum { - IFLA_INET_UNSPEC, - IFLA_INET_CONF, - __IFLA_INET_MAX, -}; - -#define IFLA_INET_MAX (__IFLA_INET_MAX - 1) - -/* ifi_flags. - - IFF_* flags. - - The only change is: - IFF_LOOPBACK, IFF_BROADCAST and IFF_POINTOPOINT are - more not changeable by user. They describe link media - characteristics and set by device driver. - - Comments: - - Combination IFF_BROADCAST|IFF_POINTOPOINT is invalid - - If neither of these three flags are set; - the interface is NBMA. - - - IFF_MULTICAST does not mean anything special: - multicasts can be used on all not-NBMA links. - IFF_MULTICAST means that this media uses special encapsulation - for multicast frames. Apparently, all IFF_POINTOPOINT and - IFF_BROADCAST devices are able to use multicasts too. - */ - -/* IFLA_LINK. - For usual devices it is equal ifi_index. - If it is a "virtual interface" (f.e. tunnel), ifi_link - can point to real physical interface (f.e. for bandwidth calculations), - or maybe 0, what means, that real media is unknown (usual - for IPIP tunnels, when route to endpoint is allowed to change) - */ - -/* Subtype attributes for IFLA_PROTINFO */ -enum { - IFLA_INET6_UNSPEC, - IFLA_INET6_FLAGS, /* link flags */ - IFLA_INET6_CONF, /* sysctl parameters */ - IFLA_INET6_STATS, /* statistics */ - IFLA_INET6_MCAST, /* MC things. What of them? */ - IFLA_INET6_CACHEINFO, /* time values and max reasm size */ - IFLA_INET6_ICMP6STATS, /* statistics (icmpv6) */ - __IFLA_INET6_MAX -}; - -#define IFLA_INET6_MAX (__IFLA_INET6_MAX - 1) - -struct ifla_cacheinfo { - __u32 max_reasm_len; - __u32 tstamp; /* ipv6InterfaceTable updated timestamp */ - __u32 reachable_time; - __u32 retrans_time; -}; - -enum { - IFLA_INFO_UNSPEC, - IFLA_INFO_KIND, - IFLA_INFO_DATA, - IFLA_INFO_XSTATS, - __IFLA_INFO_MAX, -}; - -#define IFLA_INFO_MAX (__IFLA_INFO_MAX - 1) - -/* VLAN section */ - -enum { - IFLA_VLAN_UNSPEC, - IFLA_VLAN_ID, - IFLA_VLAN_FLAGS, - IFLA_VLAN_EGRESS_QOS, - IFLA_VLAN_INGRESS_QOS, - __IFLA_VLAN_MAX, -}; - -#define IFLA_VLAN_MAX (__IFLA_VLAN_MAX - 1) - -struct ifla_vlan_flags { - __u32 flags; - __u32 mask; -}; - -enum { - IFLA_VLAN_QOS_UNSPEC, - IFLA_VLAN_QOS_MAPPING, - __IFLA_VLAN_QOS_MAX -}; - -#define IFLA_VLAN_QOS_MAX (__IFLA_VLAN_QOS_MAX - 1) - -struct ifla_vlan_qos_mapping { - __u32 from; - __u32 to; -}; - -/* MACVLAN section */ -enum { - IFLA_MACVLAN_UNSPEC, - IFLA_MACVLAN_MODE, - IFLA_MACVLAN_FLAGS, - __IFLA_MACVLAN_MAX, -}; - -#define IFLA_MACVLAN_MAX (__IFLA_MACVLAN_MAX - 1) - -enum macvlan_mode { - MACVLAN_MODE_PRIVATE = 1, /* don't talk to other macvlans */ - MACVLAN_MODE_VEPA = 2, /* talk to other ports through ext bridge */ - MACVLAN_MODE_BRIDGE = 4, /* talk to bridge ports directly */ - MACVLAN_MODE_PASSTHRU = 8,/* take over the underlying device */ -}; - -#define MACVLAN_FLAG_NOPROMISC 1 - -/* VXLAN section */ -enum { - IFLA_VXLAN_UNSPEC, - IFLA_VXLAN_ID, - IFLA_VXLAN_GROUP, - IFLA_VXLAN_LINK, - IFLA_VXLAN_LOCAL, - IFLA_VXLAN_TTL, - IFLA_VXLAN_TOS, - IFLA_VXLAN_LEARNING, - IFLA_VXLAN_AGEING, - IFLA_VXLAN_LIMIT, - IFLA_VXLAN_PORT_RANGE, - __IFLA_VXLAN_MAX -}; -#define IFLA_VXLAN_MAX (__IFLA_VXLAN_MAX - 1) - -struct ifla_vxlan_port_range { - __be16 low; - __be16 high; -}; - -/* SR-IOV virtual function management section */ - -enum { - IFLA_VF_INFO_UNSPEC, - IFLA_VF_INFO, - __IFLA_VF_INFO_MAX, -}; - -#define IFLA_VF_INFO_MAX (__IFLA_VF_INFO_MAX - 1) - -enum { - IFLA_VF_UNSPEC, - IFLA_VF_MAC, /* Hardware queue specific attributes */ - IFLA_VF_VLAN, - IFLA_VF_TX_RATE, /* TX Bandwidth Allocation */ - IFLA_VF_SPOOFCHK, /* Spoof Checking on/off switch */ - __IFLA_VF_MAX, -}; - -#define IFLA_VF_MAX (__IFLA_VF_MAX - 1) - -struct ifla_vf_mac { - __u32 vf; - __u8 mac[32]; /* MAX_ADDR_LEN */ -}; - -struct ifla_vf_vlan { - __u32 vf; - __u32 vlan; /* 0 - 4095, 0 disables VLAN filter */ - __u32 qos; -}; - -struct ifla_vf_tx_rate { - __u32 vf; - __u32 rate; /* Max TX bandwidth in Mbps, 0 disables throttling */ -}; - -struct ifla_vf_spoofchk { - __u32 vf; - __u32 setting; -}; -#ifdef __KERNEL__ /* We don't want this structure exposed to user space */ struct ifla_vf_info { @@ -346,96 +13,4 @@ struct ifla_vf_info { __u32 tx_rate; __u32 spoofchk; }; -#endif - -/* VF ports management section - * - * Nested layout of set/get msg is: - * - * [IFLA_NUM_VF] - * [IFLA_VF_PORTS] - * [IFLA_VF_PORT] - * [IFLA_PORT_*], ... - * [IFLA_VF_PORT] - * [IFLA_PORT_*], ... - * ... - * [IFLA_PORT_SELF] - * [IFLA_PORT_*], ... - */ - -enum { - IFLA_VF_PORT_UNSPEC, - IFLA_VF_PORT, /* nest */ - __IFLA_VF_PORT_MAX, -}; - -#define IFLA_VF_PORT_MAX (__IFLA_VF_PORT_MAX - 1) - -enum { - IFLA_PORT_UNSPEC, - IFLA_PORT_VF, /* __u32 */ - IFLA_PORT_PROFILE, /* string */ - IFLA_PORT_VSI_TYPE, /* 802.1Qbg (pre-)standard VDP */ - IFLA_PORT_INSTANCE_UUID, /* binary UUID */ - IFLA_PORT_HOST_UUID, /* binary UUID */ - IFLA_PORT_REQUEST, /* __u8 */ - IFLA_PORT_RESPONSE, /* __u16, output only */ - __IFLA_PORT_MAX, -}; - -#define IFLA_PORT_MAX (__IFLA_PORT_MAX - 1) - -#define PORT_PROFILE_MAX 40 -#define PORT_UUID_MAX 16 -#define PORT_SELF_VF -1 - -enum { - PORT_REQUEST_PREASSOCIATE = 0, - PORT_REQUEST_PREASSOCIATE_RR, - PORT_REQUEST_ASSOCIATE, - PORT_REQUEST_DISASSOCIATE, -}; - -enum { - PORT_VDP_RESPONSE_SUCCESS = 0, - PORT_VDP_RESPONSE_INVALID_FORMAT, - PORT_VDP_RESPONSE_INSUFFICIENT_RESOURCES, - PORT_VDP_RESPONSE_UNUSED_VTID, - PORT_VDP_RESPONSE_VTID_VIOLATION, - PORT_VDP_RESPONSE_VTID_VERSION_VIOALTION, - PORT_VDP_RESPONSE_OUT_OF_SYNC, - /* 0x08-0xFF reserved for future VDP use */ - PORT_PROFILE_RESPONSE_SUCCESS = 0x100, - PORT_PROFILE_RESPONSE_INPROGRESS, - PORT_PROFILE_RESPONSE_INVALID, - PORT_PROFILE_RESPONSE_BADSTATE, - PORT_PROFILE_RESPONSE_INSUFFICIENT_RESOURCES, - PORT_PROFILE_RESPONSE_ERROR, -}; - -struct ifla_port_vsi { - __u8 vsi_mgr_id; - __u8 vsi_type_id[3]; - __u8 vsi_type_version; - __u8 pad[3]; -}; - - -/* IPoIB section */ - -enum { - IFLA_IPOIB_UNSPEC, - IFLA_IPOIB_PKEY, - IFLA_IPOIB_MODE, - IFLA_IPOIB_UMCAST, - __IFLA_IPOIB_MAX -}; - -enum { - IPOIB_MODE_DATAGRAM = 0, /* using unreliable datagram QPs */ - IPOIB_MODE_CONNECTED = 1, /* using connected QPs */ -}; - -#define IFLA_IPOIB_MAX (__IFLA_IPOIB_MAX - 1) - #endif /* _LINUX_IF_LINK_H */ diff --git a/include/linux/if_ltalk.h b/include/linux/if_ltalk.h index 76525760ba48..81e434c50790 100644 --- a/include/linux/if_ltalk.h +++ b/include/linux/if_ltalk.h @@ -1,12 +1,7 @@ #ifndef __LINUX_LTALK_H #define __LINUX_LTALK_H -#define LTALK_HLEN 1 -#define LTALK_MTU 600 -#define LTALK_ALEN 1 +#include <uapi/linux/if_ltalk.h> -#ifdef __KERNEL__ extern struct net_device *alloc_ltalkdev(int sizeof_priv); #endif - -#endif diff --git a/include/linux/if_phonet.h b/include/linux/if_phonet.h index d70034bcec05..bbcdb0a767d8 100644 --- a/include/linux/if_phonet.h +++ b/include/linux/if_phonet.h @@ -8,12 +8,7 @@ #ifndef LINUX_IF_PHONET_H #define LINUX_IF_PHONET_H -#define PHONET_MIN_MTU 6 /* pn_length = 0 */ -#define PHONET_MAX_MTU 65541 /* pn_length = 0xffff */ -#define PHONET_DEV_MTU PHONET_MAX_MTU +#include <uapi/linux/if_phonet.h> -#ifdef __KERNEL__ extern struct header_ops phonet_header_ops; #endif - -#endif diff --git a/include/linux/if_pppol2tp.h b/include/linux/if_pppol2tp.h index b4775418d525..0fb71e532b2c 100644 --- a/include/linux/if_pppol2tp.h +++ b/include/linux/if_pppol2tp.h @@ -11,98 +11,11 @@ * 2 of the License, or (at your option) any later version. * */ - #ifndef __LINUX_IF_PPPOL2TP_H #define __LINUX_IF_PPPOL2TP_H -#include <linux/types.h> - -#ifdef __KERNEL__ #include <linux/in.h> #include <linux/in6.h> -#endif - -/* Structure used to connect() the socket to a particular tunnel UDP - * socket over IPv4. - */ -struct pppol2tp_addr { - __kernel_pid_t pid; /* pid that owns the fd. - * 0 => current */ - int fd; /* FD of UDP socket to use */ - - struct sockaddr_in addr; /* IP address and port to send to */ - - __u16 s_tunnel, s_session; /* For matching incoming packets */ - __u16 d_tunnel, d_session; /* For sending outgoing packets */ -}; - -/* Structure used to connect() the socket to a particular tunnel UDP - * socket over IPv6. - */ -struct pppol2tpin6_addr { - __kernel_pid_t pid; /* pid that owns the fd. - * 0 => current */ - int fd; /* FD of UDP socket to use */ - - __u16 s_tunnel, s_session; /* For matching incoming packets */ - __u16 d_tunnel, d_session; /* For sending outgoing packets */ - - struct sockaddr_in6 addr; /* IP address and port to send to */ -}; - -/* The L2TPv3 protocol changes tunnel and session ids from 16 to 32 - * bits. So we need a different sockaddr structure. - */ -struct pppol2tpv3_addr { - __kernel_pid_t pid; /* pid that owns the fd. - * 0 => current */ - int fd; /* FD of UDP or IP socket to use */ - - struct sockaddr_in addr; /* IP address and port to send to */ - - __u32 s_tunnel, s_session; /* For matching incoming packets */ - __u32 d_tunnel, d_session; /* For sending outgoing packets */ -}; - -struct pppol2tpv3in6_addr { - __kernel_pid_t pid; /* pid that owns the fd. - * 0 => current */ - int fd; /* FD of UDP or IP socket to use */ - - __u32 s_tunnel, s_session; /* For matching incoming packets */ - __u32 d_tunnel, d_session; /* For sending outgoing packets */ - - struct sockaddr_in6 addr; /* IP address and port to send to */ -}; - -/* Socket options: - * DEBUG - bitmask of debug message categories - * SENDSEQ - 0 => don't send packets with sequence numbers - * 1 => send packets with sequence numbers - * RECVSEQ - 0 => receive packet sequence numbers are optional - * 1 => drop receive packets without sequence numbers - * LNSMODE - 0 => act as LAC. - * 1 => act as LNS. - * REORDERTO - reorder timeout (in millisecs). If 0, don't try to reorder. - */ -enum { - PPPOL2TP_SO_DEBUG = 1, - PPPOL2TP_SO_RECVSEQ = 2, - PPPOL2TP_SO_SENDSEQ = 3, - PPPOL2TP_SO_LNSMODE = 4, - PPPOL2TP_SO_REORDERTO = 5, -}; - -/* Debug message categories for the DEBUG socket option */ -enum { - PPPOL2TP_MSG_DEBUG = (1 << 0), /* verbose debug (if - * compiled in) */ - PPPOL2TP_MSG_CONTROL = (1 << 1), /* userspace - kernel - * interface */ - PPPOL2TP_MSG_SEQ = (1 << 2), /* sequence numbers */ - PPPOL2TP_MSG_DATA = (1 << 3), /* data packets */ -}; - - +#include <uapi/linux/if_pppol2tp.h> #endif diff --git a/include/linux/if_pppox.h b/include/linux/if_pppox.h index 09c474c480cd..aff7ad8a4ea3 100644 --- a/include/linux/if_pppox.h +++ b/include/linux/if_pppox.h @@ -12,153 +12,14 @@ * 2 of the License, or (at your option) any later version. * */ - #ifndef __LINUX_IF_PPPOX_H #define __LINUX_IF_PPPOX_H - -#include <linux/types.h> -#include <asm/byteorder.h> - -#include <linux/socket.h> -#include <linux/if_ether.h> -#ifdef __KERNEL__ #include <linux/if.h> #include <linux/netdevice.h> #include <linux/ppp_channel.h> -#endif /* __KERNEL__ */ -#include <linux/if_pppol2tp.h> - -/* For user-space programs to pick up these definitions - * which they wouldn't get otherwise without defining __KERNEL__ - */ -#ifndef AF_PPPOX -#define AF_PPPOX 24 -#define PF_PPPOX AF_PPPOX -#endif /* !(AF_PPPOX) */ - -/************************************************************************ - * PPPoE addressing definition - */ -typedef __be16 sid_t; -struct pppoe_addr { - sid_t sid; /* Session identifier */ - unsigned char remote[ETH_ALEN]; /* Remote address */ - char dev[IFNAMSIZ]; /* Local device to use */ -}; - -/************************************************************************ - * PPTP addressing definition - */ -struct pptp_addr { - __be16 call_id; - struct in_addr sin_addr; -}; - -/************************************************************************ - * Protocols supported by AF_PPPOX - */ -#define PX_PROTO_OE 0 /* Currently just PPPoE */ -#define PX_PROTO_OL2TP 1 /* Now L2TP also */ -#define PX_PROTO_PPTP 2 -#define PX_MAX_PROTO 3 - -struct sockaddr_pppox { - __kernel_sa_family_t sa_family; /* address family, AF_PPPOX */ - unsigned int sa_protocol; /* protocol identifier */ - union { - struct pppoe_addr pppoe; - struct pptp_addr pptp; - } sa_addr; -} __packed; - -/* The use of the above union isn't viable because the size of this - * struct must stay fixed over time -- applications use sizeof(struct - * sockaddr_pppox) to fill it. We use a protocol specific sockaddr - * type instead. - */ -struct sockaddr_pppol2tp { - __kernel_sa_family_t sa_family; /* address family, AF_PPPOX */ - unsigned int sa_protocol; /* protocol identifier */ - struct pppol2tp_addr pppol2tp; -} __packed; - -struct sockaddr_pppol2tpin6 { - __kernel_sa_family_t sa_family; /* address family, AF_PPPOX */ - unsigned int sa_protocol; /* protocol identifier */ - struct pppol2tpin6_addr pppol2tp; -} __packed; - -/* The L2TPv3 protocol changes tunnel and session ids from 16 to 32 - * bits. So we need a different sockaddr structure. - */ -struct sockaddr_pppol2tpv3 { - __kernel_sa_family_t sa_family; /* address family, AF_PPPOX */ - unsigned int sa_protocol; /* protocol identifier */ - struct pppol2tpv3_addr pppol2tp; -} __packed; - -struct sockaddr_pppol2tpv3in6 { - __kernel_sa_family_t sa_family; /* address family, AF_PPPOX */ - unsigned int sa_protocol; /* protocol identifier */ - struct pppol2tpv3in6_addr pppol2tp; -} __packed; - -/********************************************************************* - * - * ioctl interface for defining forwarding of connections - * - ********************************************************************/ - -#define PPPOEIOCSFWD _IOW(0xB1 ,0, size_t) -#define PPPOEIOCDFWD _IO(0xB1 ,1) -/*#define PPPOEIOCGFWD _IOWR(0xB1,2, size_t)*/ - -/* Codes to identify message types */ -#define PADI_CODE 0x09 -#define PADO_CODE 0x07 -#define PADR_CODE 0x19 -#define PADS_CODE 0x65 -#define PADT_CODE 0xa7 -struct pppoe_tag { - __be16 tag_type; - __be16 tag_len; - char tag_data[0]; -} __attribute__ ((packed)); - -/* Tag identifiers */ -#define PTT_EOL __cpu_to_be16(0x0000) -#define PTT_SRV_NAME __cpu_to_be16(0x0101) -#define PTT_AC_NAME __cpu_to_be16(0x0102) -#define PTT_HOST_UNIQ __cpu_to_be16(0x0103) -#define PTT_AC_COOKIE __cpu_to_be16(0x0104) -#define PTT_VENDOR __cpu_to_be16(0x0105) -#define PTT_RELAY_SID __cpu_to_be16(0x0110) -#define PTT_SRV_ERR __cpu_to_be16(0x0201) -#define PTT_SYS_ERR __cpu_to_be16(0x0202) -#define PTT_GEN_ERR __cpu_to_be16(0x0203) - -struct pppoe_hdr { -#if defined(__LITTLE_ENDIAN_BITFIELD) - __u8 ver : 4; - __u8 type : 4; -#elif defined(__BIG_ENDIAN_BITFIELD) - __u8 type : 4; - __u8 ver : 4; -#else -#error "Please fix <asm/byteorder.h>" -#endif - __u8 code; - __be16 sid; - __be16 length; - struct pppoe_tag tag[0]; -} __packed; - -/* Length of entire PPPoE + PPP header */ -#define PPPOE_SES_HLEN 8 - -#ifdef __KERNEL__ #include <linux/skbuff.h> +#include <uapi/linux/if_pppox.h> static inline struct pppoe_hdr *pppoe_hdr(const struct sk_buff *skb) { @@ -232,6 +93,4 @@ enum { PPPOX_DEAD = 16 /* dead, useless, please clean me up!*/ }; -#endif /* __KERNEL__ */ - #endif /* !(__LINUX_IF_PPPOX_H) */ diff --git a/include/linux/if_team.h b/include/linux/if_team.h index 6d88a7f57680..0245def2aa93 100644 --- a/include/linux/if_team.h +++ b/include/linux/if_team.h @@ -7,14 +7,13 @@ * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. */ - #ifndef _LINUX_IF_TEAM_H_ #define _LINUX_IF_TEAM_H_ -#ifdef __KERNEL__ #include <linux/netpoll.h> #include <net/sch_generic.h> +#include <uapi/linux/if_team.h> struct team_pcpu_stats { u64 rx_packets; @@ -251,98 +250,4 @@ extern void team_mode_unregister(const struct team_mode *mode); #define TEAM_DEFAULT_NUM_TX_QUEUES 16 #define TEAM_DEFAULT_NUM_RX_QUEUES 16 -#endif /* __KERNEL__ */ - -#define TEAM_STRING_MAX_LEN 32 - -/********************************** - * NETLINK_GENERIC netlink family. - **********************************/ - -enum { - TEAM_CMD_NOOP, - TEAM_CMD_OPTIONS_SET, - TEAM_CMD_OPTIONS_GET, - TEAM_CMD_PORT_LIST_GET, - - __TEAM_CMD_MAX, - TEAM_CMD_MAX = (__TEAM_CMD_MAX - 1), -}; - -enum { - TEAM_ATTR_UNSPEC, - TEAM_ATTR_TEAM_IFINDEX, /* u32 */ - TEAM_ATTR_LIST_OPTION, /* nest */ - TEAM_ATTR_LIST_PORT, /* nest */ - - __TEAM_ATTR_MAX, - TEAM_ATTR_MAX = __TEAM_ATTR_MAX - 1, -}; - -/* Nested layout of get/set msg: - * - * [TEAM_ATTR_LIST_OPTION] - * [TEAM_ATTR_ITEM_OPTION] - * [TEAM_ATTR_OPTION_*], ... - * [TEAM_ATTR_ITEM_OPTION] - * [TEAM_ATTR_OPTION_*], ... - * ... - * [TEAM_ATTR_LIST_PORT] - * [TEAM_ATTR_ITEM_PORT] - * [TEAM_ATTR_PORT_*], ... - * [TEAM_ATTR_ITEM_PORT] - * [TEAM_ATTR_PORT_*], ... - * ... - */ - -enum { - TEAM_ATTR_ITEM_OPTION_UNSPEC, - TEAM_ATTR_ITEM_OPTION, /* nest */ - - __TEAM_ATTR_ITEM_OPTION_MAX, - TEAM_ATTR_ITEM_OPTION_MAX = __TEAM_ATTR_ITEM_OPTION_MAX - 1, -}; - -enum { - TEAM_ATTR_OPTION_UNSPEC, - TEAM_ATTR_OPTION_NAME, /* string */ - TEAM_ATTR_OPTION_CHANGED, /* flag */ - TEAM_ATTR_OPTION_TYPE, /* u8 */ - TEAM_ATTR_OPTION_DATA, /* dynamic */ - TEAM_ATTR_OPTION_REMOVED, /* flag */ - TEAM_ATTR_OPTION_PORT_IFINDEX, /* u32 */ /* for per-port options */ - TEAM_ATTR_OPTION_ARRAY_INDEX, /* u32 */ /* for array options */ - - __TEAM_ATTR_OPTION_MAX, - TEAM_ATTR_OPTION_MAX = __TEAM_ATTR_OPTION_MAX - 1, -}; - -enum { - TEAM_ATTR_ITEM_PORT_UNSPEC, - TEAM_ATTR_ITEM_PORT, /* nest */ - - __TEAM_ATTR_ITEM_PORT_MAX, - TEAM_ATTR_ITEM_PORT_MAX = __TEAM_ATTR_ITEM_PORT_MAX - 1, -}; - -enum { - TEAM_ATTR_PORT_UNSPEC, - TEAM_ATTR_PORT_IFINDEX, /* u32 */ - TEAM_ATTR_PORT_CHANGED, /* flag */ - TEAM_ATTR_PORT_LINKUP, /* flag */ - TEAM_ATTR_PORT_SPEED, /* u32 */ - TEAM_ATTR_PORT_DUPLEX, /* u8 */ - TEAM_ATTR_PORT_REMOVED, /* flag */ - - __TEAM_ATTR_PORT_MAX, - TEAM_ATTR_PORT_MAX = __TEAM_ATTR_PORT_MAX - 1, -}; - -/* - * NETLINK_GENERIC related info - */ -#define TEAM_GENL_NAME "team" -#define TEAM_GENL_VERSION 0x1 -#define TEAM_GENL_CHANGE_EVENT_MC_GRP_NAME "change_event" - #endif /* _LINUX_IF_TEAM_H_ */ diff --git a/include/linux/if_tun.h b/include/linux/if_tun.h index 06b1829731fd..ed6da2e6df90 100644 --- a/include/linux/if_tun.h +++ b/include/linux/if_tun.h @@ -12,86 +12,11 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ - #ifndef __IF_TUN_H #define __IF_TUN_H -#include <linux/types.h> -#include <linux/if_ether.h> -#include <linux/filter.h> - -/* Read queue size */ -#define TUN_READQ_SIZE 500 - -/* TUN device flags */ -#define TUN_TUN_DEV 0x0001 -#define TUN_TAP_DEV 0x0002 -#define TUN_TYPE_MASK 0x000f - -#define TUN_FASYNC 0x0010 -#define TUN_NOCHECKSUM 0x0020 -#define TUN_NO_PI 0x0040 -#define TUN_ONE_QUEUE 0x0080 -#define TUN_PERSIST 0x0100 -#define TUN_VNET_HDR 0x0200 - -/* Ioctl defines */ -#define TUNSETNOCSUM _IOW('T', 200, int) -#define TUNSETDEBUG _IOW('T', 201, int) -#define TUNSETIFF _IOW('T', 202, int) -#define TUNSETPERSIST _IOW('T', 203, int) -#define TUNSETOWNER _IOW('T', 204, int) -#define TUNSETLINK _IOW('T', 205, int) -#define TUNSETGROUP _IOW('T', 206, int) -#define TUNGETFEATURES _IOR('T', 207, unsigned int) -#define TUNSETOFFLOAD _IOW('T', 208, unsigned int) -#define TUNSETTXFILTER _IOW('T', 209, unsigned int) -#define TUNGETIFF _IOR('T', 210, unsigned int) -#define TUNGETSNDBUF _IOR('T', 211, int) -#define TUNSETSNDBUF _IOW('T', 212, int) -#define TUNATTACHFILTER _IOW('T', 213, struct sock_fprog) -#define TUNDETACHFILTER _IOW('T', 214, struct sock_fprog) -#define TUNGETVNETHDRSZ _IOR('T', 215, int) -#define TUNSETVNETHDRSZ _IOW('T', 216, int) - -/* TUNSETIFF ifr flags */ -#define IFF_TUN 0x0001 -#define IFF_TAP 0x0002 -#define IFF_NO_PI 0x1000 -#define IFF_ONE_QUEUE 0x2000 -#define IFF_VNET_HDR 0x4000 -#define IFF_TUN_EXCL 0x8000 - -/* Features for GSO (TUNSETOFFLOAD). */ -#define TUN_F_CSUM 0x01 /* You can hand me unchecksummed packets. */ -#define TUN_F_TSO4 0x02 /* I can handle TSO for IPv4 packets */ -#define TUN_F_TSO6 0x04 /* I can handle TSO for IPv6 packets */ -#define TUN_F_TSO_ECN 0x08 /* I can handle TSO with ECN bits. */ -#define TUN_F_UFO 0x10 /* I can handle UFO packets */ - -/* Protocol info prepended to the packets (when IFF_NO_PI is not set) */ -#define TUN_PKT_STRIP 0x0001 -struct tun_pi { - __u16 flags; - __be16 proto; -}; - -/* - * Filter spec (used for SETXXFILTER ioctls) - * This stuff is applicable only to the TAP (Ethernet) devices. - * If the count is zero the filter is disabled and the driver accepts - * all packets (promisc mode). - * If the filter is enabled in order to accept broadcast packets - * broadcast addr must be explicitly included in the addr list. - */ -#define TUN_FLT_ALLMULTI 0x0001 /* Accept all multicast packets */ -struct tun_filter { - __u16 flags; /* TUN_FLT_ flags see above */ - __u16 count; /* Number of addresses */ - __u8 addr[0][ETH_ALEN]; -}; +#include <uapi/linux/if_tun.h> -#ifdef __KERNEL__ #if defined(CONFIG_TUN) || defined(CONFIG_TUN_MODULE) struct socket *tun_get_socket(struct file *); #else @@ -104,5 +29,4 @@ static inline struct socket *tun_get_socket(struct file *f) return ERR_PTR(-EINVAL); } #endif /* CONFIG_TUN */ -#endif /* __KERNEL__ */ #endif /* __IF_TUN_H */ diff --git a/include/linux/if_tunnel.h b/include/linux/if_tunnel.h index 8c5035ac3142..1cc595a67cc9 100644 --- a/include/linux/if_tunnel.h +++ b/include/linux/if_tunnel.h @@ -1,100 +1,8 @@ #ifndef _IF_TUNNEL_H_ #define _IF_TUNNEL_H_ -#include <linux/types.h> -#include <asm/byteorder.h> - -#ifdef __KERNEL__ #include <linux/ip.h> #include <linux/in6.h> -#endif - -#define SIOCGETTUNNEL (SIOCDEVPRIVATE + 0) -#define SIOCADDTUNNEL (SIOCDEVPRIVATE + 1) -#define SIOCDELTUNNEL (SIOCDEVPRIVATE + 2) -#define SIOCCHGTUNNEL (SIOCDEVPRIVATE + 3) -#define SIOCGETPRL (SIOCDEVPRIVATE + 4) -#define SIOCADDPRL (SIOCDEVPRIVATE + 5) -#define SIOCDELPRL (SIOCDEVPRIVATE + 6) -#define SIOCCHGPRL (SIOCDEVPRIVATE + 7) -#define SIOCGET6RD (SIOCDEVPRIVATE + 8) -#define SIOCADD6RD (SIOCDEVPRIVATE + 9) -#define SIOCDEL6RD (SIOCDEVPRIVATE + 10) -#define SIOCCHG6RD (SIOCDEVPRIVATE + 11) - -#define GRE_CSUM __cpu_to_be16(0x8000) -#define GRE_ROUTING __cpu_to_be16(0x4000) -#define GRE_KEY __cpu_to_be16(0x2000) -#define GRE_SEQ __cpu_to_be16(0x1000) -#define GRE_STRICT __cpu_to_be16(0x0800) -#define GRE_REC __cpu_to_be16(0x0700) -#define GRE_FLAGS __cpu_to_be16(0x00F8) -#define GRE_VERSION __cpu_to_be16(0x0007) - -struct ip_tunnel_parm { - char name[IFNAMSIZ]; - int link; - __be16 i_flags; - __be16 o_flags; - __be32 i_key; - __be32 o_key; - struct iphdr iph; -}; - -/* SIT-mode i_flags */ -#define SIT_ISATAP 0x0001 - -struct ip_tunnel_prl { - __be32 addr; - __u16 flags; - __u16 __reserved; - __u32 datalen; - __u32 __reserved2; - /* data follows */ -}; - -/* PRL flags */ -#define PRL_DEFAULT 0x0001 - -struct ip_tunnel_6rd { - struct in6_addr prefix; - __be32 relay_prefix; - __u16 prefixlen; - __u16 relay_prefixlen; -}; - -enum { - IFLA_GRE_UNSPEC, - IFLA_GRE_LINK, - IFLA_GRE_IFLAGS, - IFLA_GRE_OFLAGS, - IFLA_GRE_IKEY, - IFLA_GRE_OKEY, - IFLA_GRE_LOCAL, - IFLA_GRE_REMOTE, - IFLA_GRE_TTL, - IFLA_GRE_TOS, - IFLA_GRE_PMTUDISC, - IFLA_GRE_ENCAP_LIMIT, - IFLA_GRE_FLOWINFO, - IFLA_GRE_FLAGS, - __IFLA_GRE_MAX, -}; - -#define IFLA_GRE_MAX (__IFLA_GRE_MAX - 1) - -/* VTI-mode i_flags */ -#define VTI_ISVTI 0x0001 - -enum { - IFLA_VTI_UNSPEC, - IFLA_VTI_LINK, - IFLA_VTI_IKEY, - IFLA_VTI_OKEY, - IFLA_VTI_LOCAL, - IFLA_VTI_REMOTE, - __IFLA_VTI_MAX, -}; +#include <uapi/linux/if_tunnel.h> -#define IFLA_VTI_MAX (__IFLA_VTI_MAX - 1) #endif /* _IF_TUNNEL_H_ */ diff --git a/include/linux/if_vlan.h b/include/linux/if_vlan.h index c0ff748d0aa5..d06cc5c8f58c 100644 --- a/include/linux/if_vlan.h +++ b/include/linux/if_vlan.h @@ -9,15 +9,14 @@ * 2 of the License, or (at your option) any later version. * */ - #ifndef _LINUX_IF_VLAN_H_ #define _LINUX_IF_VLAN_H_ -#ifdef __KERNEL__ #include <linux/netdevice.h> #include <linux/etherdevice.h> #include <linux/rtnetlink.h> #include <linux/bug.h> +#include <uapi/linux/if_vlan.h> #define VLAN_HLEN 4 /* The additional bytes required by VLAN * (in addition to the Ethernet header) @@ -361,52 +360,4 @@ static inline void vlan_set_encap_proto(struct sk_buff *skb, */ skb->protocol = htons(ETH_P_802_2); } -#endif /* __KERNEL__ */ - -/* VLAN IOCTLs are found in sockios.h */ - -/* Passed in vlan_ioctl_args structure to determine behaviour. */ -enum vlan_ioctl_cmds { - ADD_VLAN_CMD, - DEL_VLAN_CMD, - SET_VLAN_INGRESS_PRIORITY_CMD, - SET_VLAN_EGRESS_PRIORITY_CMD, - GET_VLAN_INGRESS_PRIORITY_CMD, - GET_VLAN_EGRESS_PRIORITY_CMD, - SET_VLAN_NAME_TYPE_CMD, - SET_VLAN_FLAG_CMD, - GET_VLAN_REALDEV_NAME_CMD, /* If this works, you know it's a VLAN device, btw */ - GET_VLAN_VID_CMD /* Get the VID of this VLAN (specified by name) */ -}; - -enum vlan_flags { - VLAN_FLAG_REORDER_HDR = 0x1, - VLAN_FLAG_GVRP = 0x2, - VLAN_FLAG_LOOSE_BINDING = 0x4, -}; - -enum vlan_name_types { - VLAN_NAME_TYPE_PLUS_VID, /* Name will look like: vlan0005 */ - VLAN_NAME_TYPE_RAW_PLUS_VID, /* name will look like: eth1.0005 */ - VLAN_NAME_TYPE_PLUS_VID_NO_PAD, /* Name will look like: vlan5 */ - VLAN_NAME_TYPE_RAW_PLUS_VID_NO_PAD, /* Name will look like: eth0.5 */ - VLAN_NAME_TYPE_HIGHEST -}; - -struct vlan_ioctl_args { - int cmd; /* Should be one of the vlan_ioctl_cmds enum above. */ - char device1[24]; - - union { - char device2[24]; - int VID; - unsigned int skb_priority; - unsigned int name_type; - unsigned int bind_type; - unsigned int flag; /* Matches vlan_dev_priv flags */ - } u; - - short vlan_qos; -}; - #endif /* !(_LINUX_IF_VLAN_H_) */ diff --git a/include/linux/igmp.h b/include/linux/igmp.h index 82de336b8155..7f2bf1518480 100644 --- a/include/linux/igmp.h +++ b/include/linux/igmp.h @@ -12,123 +12,13 @@ * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. */ - #ifndef _LINUX_IGMP_H #define _LINUX_IGMP_H -#include <linux/types.h> -#include <asm/byteorder.h> - -/* - * IGMP protocol structures - */ - -/* - * Header in on cable format - */ - -struct igmphdr { - __u8 type; - __u8 code; /* For newer IGMP */ - __sum16 csum; - __be32 group; -}; - -/* V3 group record types [grec_type] */ -#define IGMPV3_MODE_IS_INCLUDE 1 -#define IGMPV3_MODE_IS_EXCLUDE 2 -#define IGMPV3_CHANGE_TO_INCLUDE 3 -#define IGMPV3_CHANGE_TO_EXCLUDE 4 -#define IGMPV3_ALLOW_NEW_SOURCES 5 -#define IGMPV3_BLOCK_OLD_SOURCES 6 - -struct igmpv3_grec { - __u8 grec_type; - __u8 grec_auxwords; - __be16 grec_nsrcs; - __be32 grec_mca; - __be32 grec_src[0]; -}; - -struct igmpv3_report { - __u8 type; - __u8 resv1; - __be16 csum; - __be16 resv2; - __be16 ngrec; - struct igmpv3_grec grec[0]; -}; - -struct igmpv3_query { - __u8 type; - __u8 code; - __be16 csum; - __be32 group; -#if defined(__LITTLE_ENDIAN_BITFIELD) - __u8 qrv:3, - suppress:1, - resv:4; -#elif defined(__BIG_ENDIAN_BITFIELD) - __u8 resv:4, - suppress:1, - qrv:3; -#else -#error "Please fix <asm/byteorder.h>" -#endif - __u8 qqic; - __be16 nsrcs; - __be32 srcs[0]; -}; - -#define IGMP_HOST_MEMBERSHIP_QUERY 0x11 /* From RFC1112 */ -#define IGMP_HOST_MEMBERSHIP_REPORT 0x12 /* Ditto */ -#define IGMP_DVMRP 0x13 /* DVMRP routing */ -#define IGMP_PIM 0x14 /* PIM routing */ -#define IGMP_TRACE 0x15 -#define IGMPV2_HOST_MEMBERSHIP_REPORT 0x16 /* V2 version of 0x12 */ -#define IGMP_HOST_LEAVE_MESSAGE 0x17 -#define IGMPV3_HOST_MEMBERSHIP_REPORT 0x22 /* V3 version of 0x12 */ - -#define IGMP_MTRACE_RESP 0x1e -#define IGMP_MTRACE 0x1f - - -/* - * Use the BSD names for these for compatibility - */ - -#define IGMP_DELAYING_MEMBER 0x01 -#define IGMP_IDLE_MEMBER 0x02 -#define IGMP_LAZY_MEMBER 0x03 -#define IGMP_SLEEPING_MEMBER 0x04 -#define IGMP_AWAKENING_MEMBER 0x05 - -#define IGMP_MINLEN 8 - -#define IGMP_MAX_HOST_REPORT_DELAY 10 /* max delay for response to */ - /* query (in seconds) */ - -#define IGMP_TIMER_SCALE 10 /* denotes that the igmphdr->timer field */ - /* specifies time in 10th of seconds */ - -#define IGMP_AGE_THRESHOLD 400 /* If this host don't hear any IGMP V1 */ - /* message in this period of time, */ - /* revert to IGMP v2 router. */ - -#define IGMP_ALL_HOSTS htonl(0xE0000001L) -#define IGMP_ALL_ROUTER htonl(0xE0000002L) -#define IGMPV3_ALL_MCR htonl(0xE0000016L) -#define IGMP_LOCAL_GROUP htonl(0xE0000000L) -#define IGMP_LOCAL_GROUP_MASK htonl(0xFFFFFF00L) - -/* - * struct for keeping the multicast list in - */ - -#ifdef __KERNEL__ #include <linux/skbuff.h> #include <linux/timer.h> #include <linux/in.h> +#include <uapi/linux/igmp.h> static inline struct igmphdr *igmp_hdr(const struct sk_buff *skb) { @@ -241,4 +131,3 @@ extern void ip_mc_inc_group(struct in_device *in_dev, __be32 addr); extern void ip_mc_rejoin_groups(struct in_device *in_dev); #endif -#endif diff --git a/include/linux/in.h b/include/linux/in.h index e0337f11d92e..31b493734763 100644 --- a/include/linux/in.h +++ b/include/linux/in.h @@ -18,240 +18,9 @@ #ifndef _LINUX_IN_H #define _LINUX_IN_H -#include <linux/types.h> -#include <linux/socket.h> - -/* Standard well-defined IP protocols. */ -enum { - IPPROTO_IP = 0, /* Dummy protocol for TCP */ - IPPROTO_ICMP = 1, /* Internet Control Message Protocol */ - IPPROTO_IGMP = 2, /* Internet Group Management Protocol */ - IPPROTO_IPIP = 4, /* IPIP tunnels (older KA9Q tunnels use 94) */ - IPPROTO_TCP = 6, /* Transmission Control Protocol */ - IPPROTO_EGP = 8, /* Exterior Gateway Protocol */ - IPPROTO_PUP = 12, /* PUP protocol */ - IPPROTO_UDP = 17, /* User Datagram Protocol */ - IPPROTO_IDP = 22, /* XNS IDP protocol */ - IPPROTO_DCCP = 33, /* Datagram Congestion Control Protocol */ - IPPROTO_RSVP = 46, /* RSVP protocol */ - IPPROTO_GRE = 47, /* Cisco GRE tunnels (rfc 1701,1702) */ - - IPPROTO_IPV6 = 41, /* IPv6-in-IPv4 tunnelling */ - - IPPROTO_ESP = 50, /* Encapsulation Security Payload protocol */ - IPPROTO_AH = 51, /* Authentication Header protocol */ - IPPROTO_BEETPH = 94, /* IP option pseudo header for BEET */ - IPPROTO_PIM = 103, /* Protocol Independent Multicast */ - - IPPROTO_COMP = 108, /* Compression Header protocol */ - IPPROTO_SCTP = 132, /* Stream Control Transport Protocol */ - IPPROTO_UDPLITE = 136, /* UDP-Lite (RFC 3828) */ - - IPPROTO_RAW = 255, /* Raw IP packets */ - IPPROTO_MAX -}; - - -/* Internet address. */ -struct in_addr { - __be32 s_addr; -}; - -#define IP_TOS 1 -#define IP_TTL 2 -#define IP_HDRINCL 3 -#define IP_OPTIONS 4 -#define IP_ROUTER_ALERT 5 -#define IP_RECVOPTS 6 -#define IP_RETOPTS 7 -#define IP_PKTINFO 8 -#define IP_PKTOPTIONS 9 -#define IP_MTU_DISCOVER 10 -#define IP_RECVERR 11 -#define IP_RECVTTL 12 -#define IP_RECVTOS 13 -#define IP_MTU 14 -#define IP_FREEBIND 15 -#define IP_IPSEC_POLICY 16 -#define IP_XFRM_POLICY 17 -#define IP_PASSSEC 18 -#define IP_TRANSPARENT 19 - -/* BSD compatibility */ -#define IP_RECVRETOPTS IP_RETOPTS - -/* TProxy original addresses */ -#define IP_ORIGDSTADDR 20 -#define IP_RECVORIGDSTADDR IP_ORIGDSTADDR - -#define IP_MINTTL 21 -#define IP_NODEFRAG 22 - -/* IP_MTU_DISCOVER values */ -#define IP_PMTUDISC_DONT 0 /* Never send DF frames */ -#define IP_PMTUDISC_WANT 1 /* Use per route hints */ -#define IP_PMTUDISC_DO 2 /* Always DF */ -#define IP_PMTUDISC_PROBE 3 /* Ignore dst pmtu */ - -#define IP_MULTICAST_IF 32 -#define IP_MULTICAST_TTL 33 -#define IP_MULTICAST_LOOP 34 -#define IP_ADD_MEMBERSHIP 35 -#define IP_DROP_MEMBERSHIP 36 -#define IP_UNBLOCK_SOURCE 37 -#define IP_BLOCK_SOURCE 38 -#define IP_ADD_SOURCE_MEMBERSHIP 39 -#define IP_DROP_SOURCE_MEMBERSHIP 40 -#define IP_MSFILTER 41 -#define MCAST_JOIN_GROUP 42 -#define MCAST_BLOCK_SOURCE 43 -#define MCAST_UNBLOCK_SOURCE 44 -#define MCAST_LEAVE_GROUP 45 -#define MCAST_JOIN_SOURCE_GROUP 46 -#define MCAST_LEAVE_SOURCE_GROUP 47 -#define MCAST_MSFILTER 48 -#define IP_MULTICAST_ALL 49 -#define IP_UNICAST_IF 50 - -#define MCAST_EXCLUDE 0 -#define MCAST_INCLUDE 1 - -/* These need to appear somewhere around here */ -#define IP_DEFAULT_MULTICAST_TTL 1 -#define IP_DEFAULT_MULTICAST_LOOP 1 - -/* Request struct for multicast socket ops */ - -struct ip_mreq { - struct in_addr imr_multiaddr; /* IP multicast address of group */ - struct in_addr imr_interface; /* local IP address of interface */ -}; - -struct ip_mreqn { - struct in_addr imr_multiaddr; /* IP multicast address of group */ - struct in_addr imr_address; /* local IP address of interface */ - int imr_ifindex; /* Interface index */ -}; - -struct ip_mreq_source { - __be32 imr_multiaddr; - __be32 imr_interface; - __be32 imr_sourceaddr; -}; - -struct ip_msfilter { - __be32 imsf_multiaddr; - __be32 imsf_interface; - __u32 imsf_fmode; - __u32 imsf_numsrc; - __be32 imsf_slist[1]; -}; - -#define IP_MSFILTER_SIZE(numsrc) \ - (sizeof(struct ip_msfilter) - sizeof(__u32) \ - + (numsrc) * sizeof(__u32)) - -struct group_req { - __u32 gr_interface; /* interface index */ - struct __kernel_sockaddr_storage gr_group; /* group address */ -}; - -struct group_source_req { - __u32 gsr_interface; /* interface index */ - struct __kernel_sockaddr_storage gsr_group; /* group address */ - struct __kernel_sockaddr_storage gsr_source; /* source address */ -}; - -struct group_filter { - __u32 gf_interface; /* interface index */ - struct __kernel_sockaddr_storage gf_group; /* multicast address */ - __u32 gf_fmode; /* filter mode */ - __u32 gf_numsrc; /* number of sources */ - struct __kernel_sockaddr_storage gf_slist[1]; /* interface index */ -}; - -#define GROUP_FILTER_SIZE(numsrc) \ - (sizeof(struct group_filter) - sizeof(struct __kernel_sockaddr_storage) \ - + (numsrc) * sizeof(struct __kernel_sockaddr_storage)) - -struct in_pktinfo { - int ipi_ifindex; - struct in_addr ipi_spec_dst; - struct in_addr ipi_addr; -}; - -/* Structure describing an Internet (IP) socket address. */ -#define __SOCK_SIZE__ 16 /* sizeof(struct sockaddr) */ -struct sockaddr_in { - __kernel_sa_family_t sin_family; /* Address family */ - __be16 sin_port; /* Port number */ - struct in_addr sin_addr; /* Internet address */ - - /* Pad to size of `struct sockaddr'. */ - unsigned char __pad[__SOCK_SIZE__ - sizeof(short int) - - sizeof(unsigned short int) - sizeof(struct in_addr)]; -}; -#define sin_zero __pad /* for BSD UNIX comp. -FvK */ - - -/* - * Definitions of the bits in an Internet address integer. - * On subnets, host and network parts are found according - * to the subnet mask, not these masks. - */ -#define IN_CLASSA(a) ((((long int) (a)) & 0x80000000) == 0) -#define IN_CLASSA_NET 0xff000000 -#define IN_CLASSA_NSHIFT 24 -#define IN_CLASSA_HOST (0xffffffff & ~IN_CLASSA_NET) -#define IN_CLASSA_MAX 128 - -#define IN_CLASSB(a) ((((long int) (a)) & 0xc0000000) == 0x80000000) -#define IN_CLASSB_NET 0xffff0000 -#define IN_CLASSB_NSHIFT 16 -#define IN_CLASSB_HOST (0xffffffff & ~IN_CLASSB_NET) -#define IN_CLASSB_MAX 65536 - -#define IN_CLASSC(a) ((((long int) (a)) & 0xe0000000) == 0xc0000000) -#define IN_CLASSC_NET 0xffffff00 -#define IN_CLASSC_NSHIFT 8 -#define IN_CLASSC_HOST (0xffffffff & ~IN_CLASSC_NET) - -#define IN_CLASSD(a) ((((long int) (a)) & 0xf0000000) == 0xe0000000) -#define IN_MULTICAST(a) IN_CLASSD(a) -#define IN_MULTICAST_NET 0xF0000000 - -#define IN_EXPERIMENTAL(a) ((((long int) (a)) & 0xf0000000) == 0xf0000000) -#define IN_BADCLASS(a) IN_EXPERIMENTAL((a)) - -/* Address to accept any incoming messages. */ -#define INADDR_ANY ((unsigned long int) 0x00000000) - -/* Address to send to all hosts. */ -#define INADDR_BROADCAST ((unsigned long int) 0xffffffff) - -/* Address indicating an error return. */ -#define INADDR_NONE ((unsigned long int) 0xffffffff) - -/* Network number for local host loopback. */ -#define IN_LOOPBACKNET 127 - -/* Address to loopback in software to local host. */ -#define INADDR_LOOPBACK 0x7f000001 /* 127.0.0.1 */ -#define IN_LOOPBACK(a) ((((long int) (a)) & 0xff000000) == 0x7f000000) - -/* Defines for Multicast INADDR */ -#define INADDR_UNSPEC_GROUP 0xe0000000U /* 224.0.0.0 */ -#define INADDR_ALLHOSTS_GROUP 0xe0000001U /* 224.0.0.1 */ -#define INADDR_ALLRTRS_GROUP 0xe0000002U /* 224.0.0.2 */ -#define INADDR_MAX_LOCAL_GROUP 0xe00000ffU /* 224.0.0.255 */ - - -/* <asm/byteorder.h> contains the htonl type stuff.. */ -#include <asm/byteorder.h> - -#ifdef __KERNEL__ #include <linux/errno.h> +#include <uapi/linux/in.h> static inline int proto_ports_offset(int proto) { @@ -332,6 +101,4 @@ static inline bool ipv4_is_test_198(__be32 addr) { return (addr & htonl(0xfffe0000)) == htonl(0xc6120000); } -#endif - #endif /* _LINUX_IN_H */ diff --git a/include/linux/in6.h b/include/linux/in6.h index cba469ba11a4..9e2ae26fb598 100644 --- a/include/linux/in6.h +++ b/include/linux/in6.h @@ -17,32 +17,11 @@ * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. */ - #ifndef _LINUX_IN6_H #define _LINUX_IN6_H -#include <linux/types.h> - -/* - * IPv6 address structure - */ - -struct in6_addr { - union { - __u8 u6_addr8[16]; - __be16 u6_addr16[8]; - __be32 u6_addr32[4]; - } in6_u; -#define s6_addr in6_u.u6_addr8 -#define s6_addr16 in6_u.u6_addr16 -#define s6_addr32 in6_u.u6_addr32 -}; +#include <uapi/linux/in6.h> -/* IPv6 Wildcard Address (::) and Loopback Address (::1) defined in RFC2553 - * NOTE: Be aware the IN6ADDR_* constants and in6addr_* externals are defined - * in network byte order, not in host byte order as are the IPv4 equivalents - */ -#ifdef __KERNEL__ extern const struct in6_addr in6addr_any; #define IN6ADDR_ANY_INIT { { { 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 } } } extern const struct in6_addr in6addr_loopback; @@ -54,238 +33,3 @@ extern const struct in6_addr in6addr_linklocal_allrouters; #define IN6ADDR_LINKLOCAL_ALLROUTERS_INIT \ { { { 0xff,2,0,0,0,0,0,0,0,0,0,0,0,0,0,2 } } } #endif - -struct sockaddr_in6 { - unsigned short int sin6_family; /* AF_INET6 */ - __be16 sin6_port; /* Transport layer port # */ - __be32 sin6_flowinfo; /* IPv6 flow information */ - struct in6_addr sin6_addr; /* IPv6 address */ - __u32 sin6_scope_id; /* scope id (new in RFC2553) */ -}; - -struct ipv6_mreq { - /* IPv6 multicast address of group */ - struct in6_addr ipv6mr_multiaddr; - - /* local IPv6 address of interface */ - int ipv6mr_ifindex; -}; - -#define ipv6mr_acaddr ipv6mr_multiaddr - -struct in6_flowlabel_req { - struct in6_addr flr_dst; - __be32 flr_label; - __u8 flr_action; - __u8 flr_share; - __u16 flr_flags; - __u16 flr_expires; - __u16 flr_linger; - __u32 __flr_pad; - /* Options in format of IPV6_PKTOPTIONS */ -}; - -#define IPV6_FL_A_GET 0 -#define IPV6_FL_A_PUT 1 -#define IPV6_FL_A_RENEW 2 - -#define IPV6_FL_F_CREATE 1 -#define IPV6_FL_F_EXCL 2 - -#define IPV6_FL_S_NONE 0 -#define IPV6_FL_S_EXCL 1 -#define IPV6_FL_S_PROCESS 2 -#define IPV6_FL_S_USER 3 -#define IPV6_FL_S_ANY 255 - - -/* - * Bitmask constant declarations to help applications select out the - * flow label and priority fields. - * - * Note that this are in host byte order while the flowinfo field of - * sockaddr_in6 is in network byte order. - */ - -#define IPV6_FLOWINFO_FLOWLABEL 0x000fffff -#define IPV6_FLOWINFO_PRIORITY 0x0ff00000 - -/* These definitions are obsolete */ -#define IPV6_PRIORITY_UNCHARACTERIZED 0x0000 -#define IPV6_PRIORITY_FILLER 0x0100 -#define IPV6_PRIORITY_UNATTENDED 0x0200 -#define IPV6_PRIORITY_RESERVED1 0x0300 -#define IPV6_PRIORITY_BULK 0x0400 -#define IPV6_PRIORITY_RESERVED2 0x0500 -#define IPV6_PRIORITY_INTERACTIVE 0x0600 -#define IPV6_PRIORITY_CONTROL 0x0700 -#define IPV6_PRIORITY_8 0x0800 -#define IPV6_PRIORITY_9 0x0900 -#define IPV6_PRIORITY_10 0x0a00 -#define IPV6_PRIORITY_11 0x0b00 -#define IPV6_PRIORITY_12 0x0c00 -#define IPV6_PRIORITY_13 0x0d00 -#define IPV6_PRIORITY_14 0x0e00 -#define IPV6_PRIORITY_15 0x0f00 - -/* - * IPV6 extension headers - */ -#define IPPROTO_HOPOPTS 0 /* IPv6 hop-by-hop options */ -#define IPPROTO_ROUTING 43 /* IPv6 routing header */ -#define IPPROTO_FRAGMENT 44 /* IPv6 fragmentation header */ -#define IPPROTO_ICMPV6 58 /* ICMPv6 */ -#define IPPROTO_NONE 59 /* IPv6 no next header */ -#define IPPROTO_DSTOPTS 60 /* IPv6 destination options */ -#define IPPROTO_MH 135 /* IPv6 mobility header */ - -/* - * IPv6 TLV options. - */ -#define IPV6_TLV_PAD1 0 -#define IPV6_TLV_PADN 1 -#define IPV6_TLV_ROUTERALERT 5 -#define IPV6_TLV_JUMBO 194 -#define IPV6_TLV_HAO 201 /* home address option */ - -/* - * IPV6 socket options - */ - -#define IPV6_ADDRFORM 1 -#define IPV6_2292PKTINFO 2 -#define IPV6_2292HOPOPTS 3 -#define IPV6_2292DSTOPTS 4 -#define IPV6_2292RTHDR 5 -#define IPV6_2292PKTOPTIONS 6 -#define IPV6_CHECKSUM 7 -#define IPV6_2292HOPLIMIT 8 -#define IPV6_NEXTHOP 9 -#define IPV6_AUTHHDR 10 /* obsolete */ -#define IPV6_FLOWINFO 11 - -#define IPV6_UNICAST_HOPS 16 -#define IPV6_MULTICAST_IF 17 -#define IPV6_MULTICAST_HOPS 18 -#define IPV6_MULTICAST_LOOP 19 -#define IPV6_ADD_MEMBERSHIP 20 -#define IPV6_DROP_MEMBERSHIP 21 -#define IPV6_ROUTER_ALERT 22 -#define IPV6_MTU_DISCOVER 23 -#define IPV6_MTU 24 -#define IPV6_RECVERR 25 -#define IPV6_V6ONLY 26 -#define IPV6_JOIN_ANYCAST 27 -#define IPV6_LEAVE_ANYCAST 28 - -/* IPV6_MTU_DISCOVER values */ -#define IPV6_PMTUDISC_DONT 0 -#define IPV6_PMTUDISC_WANT 1 -#define IPV6_PMTUDISC_DO 2 -#define IPV6_PMTUDISC_PROBE 3 - -/* Flowlabel */ -#define IPV6_FLOWLABEL_MGR 32 -#define IPV6_FLOWINFO_SEND 33 - -#define IPV6_IPSEC_POLICY 34 -#define IPV6_XFRM_POLICY 35 - -/* - * Multicast: - * Following socket options are shared between IPv4 and IPv6. - * - * MCAST_JOIN_GROUP 42 - * MCAST_BLOCK_SOURCE 43 - * MCAST_UNBLOCK_SOURCE 44 - * MCAST_LEAVE_GROUP 45 - * MCAST_JOIN_SOURCE_GROUP 46 - * MCAST_LEAVE_SOURCE_GROUP 47 - * MCAST_MSFILTER 48 - */ - -/* - * Advanced API (RFC3542) (1) - * - * Note: IPV6_RECVRTHDRDSTOPTS does not exist. see net/ipv6/datagram.c. - */ - -#define IPV6_RECVPKTINFO 49 -#define IPV6_PKTINFO 50 -#define IPV6_RECVHOPLIMIT 51 -#define IPV6_HOPLIMIT 52 -#define IPV6_RECVHOPOPTS 53 -#define IPV6_HOPOPTS 54 -#define IPV6_RTHDRDSTOPTS 55 -#define IPV6_RECVRTHDR 56 -#define IPV6_RTHDR 57 -#define IPV6_RECVDSTOPTS 58 -#define IPV6_DSTOPTS 59 -#define IPV6_RECVPATHMTU 60 -#define IPV6_PATHMTU 61 -#define IPV6_DONTFRAG 62 -#if 0 /* not yet */ -#define IPV6_USE_MIN_MTU 63 -#endif - -/* - * Netfilter (1) - * - * Following socket options are used in ip6_tables; - * see include/linux/netfilter_ipv6/ip6_tables.h. - * - * IP6T_SO_SET_REPLACE / IP6T_SO_GET_INFO 64 - * IP6T_SO_SET_ADD_COUNTERS / IP6T_SO_GET_ENTRIES 65 - */ - -/* - * Advanced API (RFC3542) (2) - */ -#define IPV6_RECVTCLASS 66 -#define IPV6_TCLASS 67 - -/* - * Netfilter (2) - * - * Following socket options are used in ip6_tables; - * see include/linux/netfilter_ipv6/ip6_tables.h. - * - * IP6T_SO_GET_REVISION_MATCH 68 - * IP6T_SO_GET_REVISION_TARGET 69 - */ - -/* RFC5014: Source address selection */ -#define IPV6_ADDR_PREFERENCES 72 - -#define IPV6_PREFER_SRC_TMP 0x0001 -#define IPV6_PREFER_SRC_PUBLIC 0x0002 -#define IPV6_PREFER_SRC_PUBTMP_DEFAULT 0x0100 -#define IPV6_PREFER_SRC_COA 0x0004 -#define IPV6_PREFER_SRC_HOME 0x0400 -#define IPV6_PREFER_SRC_CGA 0x0008 -#define IPV6_PREFER_SRC_NONCGA 0x0800 - -/* RFC5082: Generalized Ttl Security Mechanism */ -#define IPV6_MINHOPCOUNT 73 - -#define IPV6_ORIGDSTADDR 74 -#define IPV6_RECVORIGDSTADDR IPV6_ORIGDSTADDR -#define IPV6_TRANSPARENT 75 -#define IPV6_UNICAST_IF 76 - -/* - * Multicast Routing: - * see include/linux/mroute6.h. - * - * MRT6_INIT 200 - * MRT6_DONE 201 - * MRT6_ADD_MIF 202 - * MRT6_DEL_MIF 203 - * MRT6_ADD_MFC 204 - * MRT6_DEL_MFC 205 - * MRT6_VERSION 206 - * MRT6_ASSERT 207 - * MRT6_PIM 208 - * (reserved) 209 - */ -#endif diff --git a/include/linux/inet_diag.h b/include/linux/inet_diag.h index e788c186ed3a..46da02410a09 100644 --- a/include/linux/inet_diag.h +++ b/include/linux/inet_diag.h @@ -1,138 +1,8 @@ #ifndef _INET_DIAG_H_ #define _INET_DIAG_H_ 1 -#include <linux/types.h> +#include <uapi/linux/inet_diag.h> -/* Just some random number */ -#define TCPDIAG_GETSOCK 18 -#define DCCPDIAG_GETSOCK 19 - -#define INET_DIAG_GETSOCK_MAX 24 - -/* Socket identity */ -struct inet_diag_sockid { - __be16 idiag_sport; - __be16 idiag_dport; - __be32 idiag_src[4]; - __be32 idiag_dst[4]; - __u32 idiag_if; - __u32 idiag_cookie[2]; -#define INET_DIAG_NOCOOKIE (~0U) -}; - -/* Request structure */ - -struct inet_diag_req { - __u8 idiag_family; /* Family of addresses. */ - __u8 idiag_src_len; - __u8 idiag_dst_len; - __u8 idiag_ext; /* Query extended information */ - - struct inet_diag_sockid id; - - __u32 idiag_states; /* States to dump */ - __u32 idiag_dbs; /* Tables to dump (NI) */ -}; - -struct inet_diag_req_v2 { - __u8 sdiag_family; - __u8 sdiag_protocol; - __u8 idiag_ext; - __u8 pad; - __u32 idiag_states; - struct inet_diag_sockid id; -}; - -enum { - INET_DIAG_REQ_NONE, - INET_DIAG_REQ_BYTECODE, -}; - -#define INET_DIAG_REQ_MAX INET_DIAG_REQ_BYTECODE - -/* Bytecode is sequence of 4 byte commands followed by variable arguments. - * All the commands identified by "code" are conditional jumps forward: - * to offset cc+"yes" or to offset cc+"no". "yes" is supposed to be - * length of the command and its arguments. - */ - -struct inet_diag_bc_op { - unsigned char code; - unsigned char yes; - unsigned short no; -}; - -enum { - INET_DIAG_BC_NOP, - INET_DIAG_BC_JMP, - INET_DIAG_BC_S_GE, - INET_DIAG_BC_S_LE, - INET_DIAG_BC_D_GE, - INET_DIAG_BC_D_LE, - INET_DIAG_BC_AUTO, - INET_DIAG_BC_S_COND, - INET_DIAG_BC_D_COND, -}; - -struct inet_diag_hostcond { - __u8 family; - __u8 prefix_len; - int port; - __be32 addr[0]; -}; - -/* Base info structure. It contains socket identity (addrs/ports/cookie) - * and, alas, the information shown by netstat. */ -struct inet_diag_msg { - __u8 idiag_family; - __u8 idiag_state; - __u8 idiag_timer; - __u8 idiag_retrans; - - struct inet_diag_sockid id; - - __u32 idiag_expires; - __u32 idiag_rqueue; - __u32 idiag_wqueue; - __u32 idiag_uid; - __u32 idiag_inode; -}; - -/* Extensions */ - -enum { - INET_DIAG_NONE, - INET_DIAG_MEMINFO, - INET_DIAG_INFO, - INET_DIAG_VEGASINFO, - INET_DIAG_CONG, - INET_DIAG_TOS, - INET_DIAG_TCLASS, - INET_DIAG_SKMEMINFO, -}; - -#define INET_DIAG_MAX INET_DIAG_SKMEMINFO - - -/* INET_DIAG_MEM */ - -struct inet_diag_meminfo { - __u32 idiag_rmem; - __u32 idiag_wmem; - __u32 idiag_fmem; - __u32 idiag_tmem; -}; - -/* INET_DIAG_VEGASINFO */ - -struct tcpvegas_info { - __u32 tcpv_enabled; - __u32 tcpv_rttcnt; - __u32 tcpv_rtt; - __u32 tcpv_minrtt; -}; - -#ifdef __KERNEL__ struct sock; struct inet_hashinfo; struct nlattr; @@ -173,6 +43,4 @@ int inet_diag_bc_sk(const struct nlattr *_bc, struct sock *sk); extern int inet_diag_register(const struct inet_diag_handler *handler); extern void inet_diag_unregister(const struct inet_diag_handler *handler); -#endif /* __KERNEL__ */ - #endif /* _INET_DIAG_H_ */ diff --git a/include/linux/inotify.h b/include/linux/inotify.h index d33041e2a42a..23aede0b5843 100644 --- a/include/linux/inotify.h +++ b/include/linux/inotify.h @@ -3,75 +3,12 @@ * * Copyright (C) 2005 John McCutchan */ - #ifndef _LINUX_INOTIFY_H #define _LINUX_INOTIFY_H -/* For O_CLOEXEC and O_NONBLOCK */ -#include <linux/fcntl.h> -#include <linux/types.h> - -/* - * struct inotify_event - structure read from the inotify device for each event - * - * When you are watching a directory, you will receive the filename for events - * such as IN_CREATE, IN_DELETE, IN_OPEN, IN_CLOSE, ..., relative to the wd. - */ -struct inotify_event { - __s32 wd; /* watch descriptor */ - __u32 mask; /* watch mask */ - __u32 cookie; /* cookie to synchronize two events */ - __u32 len; /* length (including nulls) of name */ - char name[0]; /* stub for possible name */ -}; - -/* the following are legal, implemented events that user-space can watch for */ -#define IN_ACCESS 0x00000001 /* File was accessed */ -#define IN_MODIFY 0x00000002 /* File was modified */ -#define IN_ATTRIB 0x00000004 /* Metadata changed */ -#define IN_CLOSE_WRITE 0x00000008 /* Writtable file was closed */ -#define IN_CLOSE_NOWRITE 0x00000010 /* Unwrittable file closed */ -#define IN_OPEN 0x00000020 /* File was opened */ -#define IN_MOVED_FROM 0x00000040 /* File was moved from X */ -#define IN_MOVED_TO 0x00000080 /* File was moved to Y */ -#define IN_CREATE 0x00000100 /* Subfile was created */ -#define IN_DELETE 0x00000200 /* Subfile was deleted */ -#define IN_DELETE_SELF 0x00000400 /* Self was deleted */ -#define IN_MOVE_SELF 0x00000800 /* Self was moved */ - -/* the following are legal events. they are sent as needed to any watch */ -#define IN_UNMOUNT 0x00002000 /* Backing fs was unmounted */ -#define IN_Q_OVERFLOW 0x00004000 /* Event queued overflowed */ -#define IN_IGNORED 0x00008000 /* File was ignored */ - -/* helper events */ -#define IN_CLOSE (IN_CLOSE_WRITE | IN_CLOSE_NOWRITE) /* close */ -#define IN_MOVE (IN_MOVED_FROM | IN_MOVED_TO) /* moves */ - -/* special flags */ -#define IN_ONLYDIR 0x01000000 /* only watch the path if it is a directory */ -#define IN_DONT_FOLLOW 0x02000000 /* don't follow a sym link */ -#define IN_EXCL_UNLINK 0x04000000 /* exclude events on unlinked objects */ -#define IN_MASK_ADD 0x20000000 /* add to the mask of an already existing watch */ -#define IN_ISDIR 0x40000000 /* event occurred against dir */ -#define IN_ONESHOT 0x80000000 /* only send event once */ - -/* - * All of the events - we build the list by hand so that we can add flags in - * the future and not break backward compatibility. Apps will get only the - * events that they originally wanted. Be sure to add new events here! - */ -#define IN_ALL_EVENTS (IN_ACCESS | IN_MODIFY | IN_ATTRIB | IN_CLOSE_WRITE | \ - IN_CLOSE_NOWRITE | IN_OPEN | IN_MOVED_FROM | \ - IN_MOVED_TO | IN_DELETE | IN_CREATE | IN_DELETE_SELF | \ - IN_MOVE_SELF) - -/* Flags for sys_inotify_init1. */ -#define IN_CLOEXEC O_CLOEXEC -#define IN_NONBLOCK O_NONBLOCK - -#ifdef __KERNEL__ #include <linux/sysctl.h> +#include <uapi/linux/inotify.h> + extern struct ctl_table inotify_table[]; /* for sysctl */ #define ALL_INOTIFY_BITS (IN_ACCESS | IN_MODIFY | IN_ATTRIB | IN_CLOSE_WRITE | \ @@ -82,6 +19,4 @@ extern struct ctl_table inotify_table[]; /* for sysctl */ IN_DONT_FOLLOW | IN_EXCL_UNLINK | IN_MASK_ADD | \ IN_ISDIR | IN_ONESHOT) -#endif - #endif /* _LINUX_INOTIFY_H */ diff --git a/include/linux/input.h b/include/linux/input.h index 15464ba6bf53..cab994ba6d91 100644 --- a/include/linux/input.h +++ b/include/linux/input.h @@ -1,6 +1,3 @@ -#ifndef _INPUT_H -#define _INPUT_H - /* * Copyright (c) 1999-2002 Vojtech Pavlik * @@ -8,1156 +5,15 @@ * under the terms of the GNU General Public License version 2 as published by * the Free Software Foundation. */ +#ifndef _INPUT_H +#define _INPUT_H -#ifdef __KERNEL__ #include <linux/time.h> #include <linux/list.h> -#else -#include <sys/time.h> -#include <sys/ioctl.h> -#include <sys/types.h> -#include <linux/types.h> -#endif - -/* - * The event structure itself - */ - -struct input_event { - struct timeval time; - __u16 type; - __u16 code; - __s32 value; -}; - -/* - * Protocol version. - */ - -#define EV_VERSION 0x010001 - -/* - * IOCTLs (0x00 - 0x7f) - */ - -struct input_id { - __u16 bustype; - __u16 vendor; - __u16 product; - __u16 version; -}; - -/** - * struct input_absinfo - used by EVIOCGABS/EVIOCSABS ioctls - * @value: latest reported value for the axis. - * @minimum: specifies minimum value for the axis. - * @maximum: specifies maximum value for the axis. - * @fuzz: specifies fuzz value that is used to filter noise from - * the event stream. - * @flat: values that are within this value will be discarded by - * joydev interface and reported as 0 instead. - * @resolution: specifies resolution for the values reported for - * the axis. - * - * Note that input core does not clamp reported values to the - * [minimum, maximum] limits, such task is left to userspace. - * - * Resolution for main axes (ABS_X, ABS_Y, ABS_Z) is reported in - * units per millimeter (units/mm), resolution for rotational axes - * (ABS_RX, ABS_RY, ABS_RZ) is reported in units per radian. - */ -struct input_absinfo { - __s32 value; - __s32 minimum; - __s32 maximum; - __s32 fuzz; - __s32 flat; - __s32 resolution; -}; - -/** - * struct input_keymap_entry - used by EVIOCGKEYCODE/EVIOCSKEYCODE ioctls - * @scancode: scancode represented in machine-endian form. - * @len: length of the scancode that resides in @scancode buffer. - * @index: index in the keymap, may be used instead of scancode - * @flags: allows to specify how kernel should handle the request. For - * example, setting INPUT_KEYMAP_BY_INDEX flag indicates that kernel - * should perform lookup in keymap by @index instead of @scancode - * @keycode: key code assigned to this scancode - * - * The structure is used to retrieve and modify keymap data. Users have - * option of performing lookup either by @scancode itself or by @index - * in keymap entry. EVIOCGKEYCODE will also return scancode or index - * (depending on which element was used to perform lookup). - */ -struct input_keymap_entry { -#define INPUT_KEYMAP_BY_INDEX (1 << 0) - __u8 flags; - __u8 len; - __u16 index; - __u32 keycode; - __u8 scancode[32]; -}; - -#define EVIOCGVERSION _IOR('E', 0x01, int) /* get driver version */ -#define EVIOCGID _IOR('E', 0x02, struct input_id) /* get device ID */ -#define EVIOCGREP _IOR('E', 0x03, unsigned int[2]) /* get repeat settings */ -#define EVIOCSREP _IOW('E', 0x03, unsigned int[2]) /* set repeat settings */ - -#define EVIOCGKEYCODE _IOR('E', 0x04, unsigned int[2]) /* get keycode */ -#define EVIOCGKEYCODE_V2 _IOR('E', 0x04, struct input_keymap_entry) -#define EVIOCSKEYCODE _IOW('E', 0x04, unsigned int[2]) /* set keycode */ -#define EVIOCSKEYCODE_V2 _IOW('E', 0x04, struct input_keymap_entry) - -#define EVIOCGNAME(len) _IOC(_IOC_READ, 'E', 0x06, len) /* get device name */ -#define EVIOCGPHYS(len) _IOC(_IOC_READ, 'E', 0x07, len) /* get physical location */ -#define EVIOCGUNIQ(len) _IOC(_IOC_READ, 'E', 0x08, len) /* get unique identifier */ -#define EVIOCGPROP(len) _IOC(_IOC_READ, 'E', 0x09, len) /* get device properties */ - -/** - * EVIOCGMTSLOTS(len) - get MT slot values - * @len: size of the data buffer in bytes - * - * The ioctl buffer argument should be binary equivalent to - * - * struct input_mt_request_layout { - * __u32 code; - * __s32 values[num_slots]; - * }; - * - * where num_slots is the (arbitrary) number of MT slots to extract. - * - * The ioctl size argument (len) is the size of the buffer, which - * should satisfy len = (num_slots + 1) * sizeof(__s32). If len is - * too small to fit all available slots, the first num_slots are - * returned. - * - * Before the call, code is set to the wanted ABS_MT event type. On - * return, values[] is filled with the slot values for the specified - * ABS_MT code. - * - * If the request code is not an ABS_MT value, -EINVAL is returned. - */ -#define EVIOCGMTSLOTS(len) _IOC(_IOC_READ, 'E', 0x0a, len) - -#define EVIOCGKEY(len) _IOC(_IOC_READ, 'E', 0x18, len) /* get global key state */ -#define EVIOCGLED(len) _IOC(_IOC_READ, 'E', 0x19, len) /* get all LEDs */ -#define EVIOCGSND(len) _IOC(_IOC_READ, 'E', 0x1a, len) /* get all sounds status */ -#define EVIOCGSW(len) _IOC(_IOC_READ, 'E', 0x1b, len) /* get all switch states */ - -#define EVIOCGBIT(ev,len) _IOC(_IOC_READ, 'E', 0x20 + (ev), len) /* get event bits */ -#define EVIOCGABS(abs) _IOR('E', 0x40 + (abs), struct input_absinfo) /* get abs value/limits */ -#define EVIOCSABS(abs) _IOW('E', 0xc0 + (abs), struct input_absinfo) /* set abs value/limits */ - -#define EVIOCSFF _IOC(_IOC_WRITE, 'E', 0x80, sizeof(struct ff_effect)) /* send a force effect to a force feedback device */ -#define EVIOCRMFF _IOW('E', 0x81, int) /* Erase a force effect */ -#define EVIOCGEFFECTS _IOR('E', 0x84, int) /* Report number of effects playable at the same time */ - -#define EVIOCGRAB _IOW('E', 0x90, int) /* Grab/Release device */ - -#define EVIOCSCLOCKID _IOW('E', 0xa0, int) /* Set clockid to be used for timestamps */ - -/* - * Device properties and quirks - */ - -#define INPUT_PROP_POINTER 0x00 /* needs a pointer */ -#define INPUT_PROP_DIRECT 0x01 /* direct input devices */ -#define INPUT_PROP_BUTTONPAD 0x02 /* has button(s) under pad */ -#define INPUT_PROP_SEMI_MT 0x03 /* touch rectangle only */ - -#define INPUT_PROP_MAX 0x1f -#define INPUT_PROP_CNT (INPUT_PROP_MAX + 1) - -/* - * Event types - */ - -#define EV_SYN 0x00 -#define EV_KEY 0x01 -#define EV_REL 0x02 -#define EV_ABS 0x03 -#define EV_MSC 0x04 -#define EV_SW 0x05 -#define EV_LED 0x11 -#define EV_SND 0x12 -#define EV_REP 0x14 -#define EV_FF 0x15 -#define EV_PWR 0x16 -#define EV_FF_STATUS 0x17 -#define EV_MAX 0x1f -#define EV_CNT (EV_MAX+1) - -/* - * Synchronization events. - */ - -#define SYN_REPORT 0 -#define SYN_CONFIG 1 -#define SYN_MT_REPORT 2 -#define SYN_DROPPED 3 - -/* - * Keys and buttons - * - * Most of the keys/buttons are modeled after USB HUT 1.12 - * (see http://www.usb.org/developers/hidpage). - * Abbreviations in the comments: - * AC - Application Control - * AL - Application Launch Button - * SC - System Control - */ - -#define KEY_RESERVED 0 -#define KEY_ESC 1 -#define KEY_1 2 -#define KEY_2 3 -#define KEY_3 4 -#define KEY_4 5 -#define KEY_5 6 -#define KEY_6 7 -#define KEY_7 8 -#define KEY_8 9 -#define KEY_9 10 -#define KEY_0 11 -#define KEY_MINUS 12 -#define KEY_EQUAL 13 -#define KEY_BACKSPACE 14 -#define KEY_TAB 15 -#define KEY_Q 16 -#define KEY_W 17 -#define KEY_E 18 -#define KEY_R 19 -#define KEY_T 20 -#define KEY_Y 21 -#define KEY_U 22 -#define KEY_I 23 -#define KEY_O 24 -#define KEY_P 25 -#define KEY_LEFTBRACE 26 -#define KEY_RIGHTBRACE 27 -#define KEY_ENTER 28 -#define KEY_LEFTCTRL 29 -#define KEY_A 30 -#define KEY_S 31 -#define KEY_D 32 -#define KEY_F 33 -#define KEY_G 34 -#define KEY_H 35 -#define KEY_J 36 -#define KEY_K 37 -#define KEY_L 38 -#define KEY_SEMICOLON 39 -#define KEY_APOSTROPHE 40 -#define KEY_GRAVE 41 -#define KEY_LEFTSHIFT 42 -#define KEY_BACKSLASH 43 -#define KEY_Z 44 -#define KEY_X 45 -#define KEY_C 46 -#define KEY_V 47 -#define KEY_B 48 -#define KEY_N 49 -#define KEY_M 50 -#define KEY_COMMA 51 -#define KEY_DOT 52 -#define KEY_SLASH 53 -#define KEY_RIGHTSHIFT 54 -#define KEY_KPASTERISK 55 -#define KEY_LEFTALT 56 -#define KEY_SPACE 57 -#define KEY_CAPSLOCK 58 -#define KEY_F1 59 -#define KEY_F2 60 -#define KEY_F3 61 -#define KEY_F4 62 -#define KEY_F5 63 -#define KEY_F6 64 -#define KEY_F7 65 -#define KEY_F8 66 -#define KEY_F9 67 -#define KEY_F10 68 -#define KEY_NUMLOCK 69 -#define KEY_SCROLLLOCK 70 -#define KEY_KP7 71 -#define KEY_KP8 72 -#define KEY_KP9 73 -#define KEY_KPMINUS 74 -#define KEY_KP4 75 -#define KEY_KP5 76 -#define KEY_KP6 77 -#define KEY_KPPLUS 78 -#define KEY_KP1 79 -#define KEY_KP2 80 -#define KEY_KP3 81 -#define KEY_KP0 82 -#define KEY_KPDOT 83 - -#define KEY_ZENKAKUHANKAKU 85 -#define KEY_102ND 86 -#define KEY_F11 87 -#define KEY_F12 88 -#define KEY_RO 89 -#define KEY_KATAKANA 90 -#define KEY_HIRAGANA 91 -#define KEY_HENKAN 92 -#define KEY_KATAKANAHIRAGANA 93 -#define KEY_MUHENKAN 94 -#define KEY_KPJPCOMMA 95 -#define KEY_KPENTER 96 -#define KEY_RIGHTCTRL 97 -#define KEY_KPSLASH 98 -#define KEY_SYSRQ 99 -#define KEY_RIGHTALT 100 -#define KEY_LINEFEED 101 -#define KEY_HOME 102 -#define KEY_UP 103 -#define KEY_PAGEUP 104 -#define KEY_LEFT 105 -#define KEY_RIGHT 106 -#define KEY_END 107 -#define KEY_DOWN 108 -#define KEY_PAGEDOWN 109 -#define KEY_INSERT 110 -#define KEY_DELETE 111 -#define KEY_MACRO 112 -#define KEY_MUTE 113 -#define KEY_VOLUMEDOWN 114 -#define KEY_VOLUMEUP 115 -#define KEY_POWER 116 /* SC System Power Down */ -#define KEY_KPEQUAL 117 -#define KEY_KPPLUSMINUS 118 -#define KEY_PAUSE 119 -#define KEY_SCALE 120 /* AL Compiz Scale (Expose) */ - -#define KEY_KPCOMMA 121 -#define KEY_HANGEUL 122 -#define KEY_HANGUEL KEY_HANGEUL -#define KEY_HANJA 123 -#define KEY_YEN 124 -#define KEY_LEFTMETA 125 -#define KEY_RIGHTMETA 126 -#define KEY_COMPOSE 127 - -#define KEY_STOP 128 /* AC Stop */ -#define KEY_AGAIN 129 -#define KEY_PROPS 130 /* AC Properties */ -#define KEY_UNDO 131 /* AC Undo */ -#define KEY_FRONT 132 -#define KEY_COPY 133 /* AC Copy */ -#define KEY_OPEN 134 /* AC Open */ -#define KEY_PASTE 135 /* AC Paste */ -#define KEY_FIND 136 /* AC Search */ -#define KEY_CUT 137 /* AC Cut */ -#define KEY_HELP 138 /* AL Integrated Help Center */ -#define KEY_MENU 139 /* Menu (show menu) */ -#define KEY_CALC 140 /* AL Calculator */ -#define KEY_SETUP 141 -#define KEY_SLEEP 142 /* SC System Sleep */ -#define KEY_WAKEUP 143 /* System Wake Up */ -#define KEY_FILE 144 /* AL Local Machine Browser */ -#define KEY_SENDFILE 145 -#define KEY_DELETEFILE 146 -#define KEY_XFER 147 -#define KEY_PROG1 148 -#define KEY_PROG2 149 -#define KEY_WWW 150 /* AL Internet Browser */ -#define KEY_MSDOS 151 -#define KEY_COFFEE 152 /* AL Terminal Lock/Screensaver */ -#define KEY_SCREENLOCK KEY_COFFEE -#define KEY_DIRECTION 153 -#define KEY_CYCLEWINDOWS 154 -#define KEY_MAIL 155 -#define KEY_BOOKMARKS 156 /* AC Bookmarks */ -#define KEY_COMPUTER 157 -#define KEY_BACK 158 /* AC Back */ -#define KEY_FORWARD 159 /* AC Forward */ -#define KEY_CLOSECD 160 -#define KEY_EJECTCD 161 -#define KEY_EJECTCLOSECD 162 -#define KEY_NEXTSONG 163 -#define KEY_PLAYPAUSE 164 -#define KEY_PREVIOUSSONG 165 -#define KEY_STOPCD 166 -#define KEY_RECORD 167 -#define KEY_REWIND 168 -#define KEY_PHONE 169 /* Media Select Telephone */ -#define KEY_ISO 170 -#define KEY_CONFIG 171 /* AL Consumer Control Configuration */ -#define KEY_HOMEPAGE 172 /* AC Home */ -#define KEY_REFRESH 173 /* AC Refresh */ -#define KEY_EXIT 174 /* AC Exit */ -#define KEY_MOVE 175 -#define KEY_EDIT 176 -#define KEY_SCROLLUP 177 -#define KEY_SCROLLDOWN 178 -#define KEY_KPLEFTPAREN 179 -#define KEY_KPRIGHTPAREN 180 -#define KEY_NEW 181 /* AC New */ -#define KEY_REDO 182 /* AC Redo/Repeat */ - -#define KEY_F13 183 -#define KEY_F14 184 -#define KEY_F15 185 -#define KEY_F16 186 -#define KEY_F17 187 -#define KEY_F18 188 -#define KEY_F19 189 -#define KEY_F20 190 -#define KEY_F21 191 -#define KEY_F22 192 -#define KEY_F23 193 -#define KEY_F24 194 - -#define KEY_PLAYCD 200 -#define KEY_PAUSECD 201 -#define KEY_PROG3 202 -#define KEY_PROG4 203 -#define KEY_DASHBOARD 204 /* AL Dashboard */ -#define KEY_SUSPEND 205 -#define KEY_CLOSE 206 /* AC Close */ -#define KEY_PLAY 207 -#define KEY_FASTFORWARD 208 -#define KEY_BASSBOOST 209 -#define KEY_PRINT 210 /* AC Print */ -#define KEY_HP 211 -#define KEY_CAMERA 212 -#define KEY_SOUND 213 -#define KEY_QUESTION 214 -#define KEY_EMAIL 215 -#define KEY_CHAT 216 -#define KEY_SEARCH 217 -#define KEY_CONNECT 218 -#define KEY_FINANCE 219 /* AL Checkbook/Finance */ -#define KEY_SPORT 220 -#define KEY_SHOP 221 -#define KEY_ALTERASE 222 -#define KEY_CANCEL 223 /* AC Cancel */ -#define KEY_BRIGHTNESSDOWN 224 -#define KEY_BRIGHTNESSUP 225 -#define KEY_MEDIA 226 - -#define KEY_SWITCHVIDEOMODE 227 /* Cycle between available video - outputs (Monitor/LCD/TV-out/etc) */ -#define KEY_KBDILLUMTOGGLE 228 -#define KEY_KBDILLUMDOWN 229 -#define KEY_KBDILLUMUP 230 - -#define KEY_SEND 231 /* AC Send */ -#define KEY_REPLY 232 /* AC Reply */ -#define KEY_FORWARDMAIL 233 /* AC Forward Msg */ -#define KEY_SAVE 234 /* AC Save */ -#define KEY_DOCUMENTS 235 - -#define KEY_BATTERY 236 - -#define KEY_BLUETOOTH 237 -#define KEY_WLAN 238 -#define KEY_UWB 239 - -#define KEY_UNKNOWN 240 - -#define KEY_VIDEO_NEXT 241 /* drive next video source */ -#define KEY_VIDEO_PREV 242 /* drive previous video source */ -#define KEY_BRIGHTNESS_CYCLE 243 /* brightness up, after max is min */ -#define KEY_BRIGHTNESS_ZERO 244 /* brightness off, use ambient */ -#define KEY_DISPLAY_OFF 245 /* display device to off state */ - -#define KEY_WIMAX 246 -#define KEY_RFKILL 247 /* Key that controls all radios */ - -#define KEY_MICMUTE 248 /* Mute / unmute the microphone */ - -/* Code 255 is reserved for special needs of AT keyboard driver */ - -#define BTN_MISC 0x100 -#define BTN_0 0x100 -#define BTN_1 0x101 -#define BTN_2 0x102 -#define BTN_3 0x103 -#define BTN_4 0x104 -#define BTN_5 0x105 -#define BTN_6 0x106 -#define BTN_7 0x107 -#define BTN_8 0x108 -#define BTN_9 0x109 - -#define BTN_MOUSE 0x110 -#define BTN_LEFT 0x110 -#define BTN_RIGHT 0x111 -#define BTN_MIDDLE 0x112 -#define BTN_SIDE 0x113 -#define BTN_EXTRA 0x114 -#define BTN_FORWARD 0x115 -#define BTN_BACK 0x116 -#define BTN_TASK 0x117 - -#define BTN_JOYSTICK 0x120 -#define BTN_TRIGGER 0x120 -#define BTN_THUMB 0x121 -#define BTN_THUMB2 0x122 -#define BTN_TOP 0x123 -#define BTN_TOP2 0x124 -#define BTN_PINKIE 0x125 -#define BTN_BASE 0x126 -#define BTN_BASE2 0x127 -#define BTN_BASE3 0x128 -#define BTN_BASE4 0x129 -#define BTN_BASE5 0x12a -#define BTN_BASE6 0x12b -#define BTN_DEAD 0x12f - -#define BTN_GAMEPAD 0x130 -#define BTN_A 0x130 -#define BTN_B 0x131 -#define BTN_C 0x132 -#define BTN_X 0x133 -#define BTN_Y 0x134 -#define BTN_Z 0x135 -#define BTN_TL 0x136 -#define BTN_TR 0x137 -#define BTN_TL2 0x138 -#define BTN_TR2 0x139 -#define BTN_SELECT 0x13a -#define BTN_START 0x13b -#define BTN_MODE 0x13c -#define BTN_THUMBL 0x13d -#define BTN_THUMBR 0x13e - -#define BTN_DIGI 0x140 -#define BTN_TOOL_PEN 0x140 -#define BTN_TOOL_RUBBER 0x141 -#define BTN_TOOL_BRUSH 0x142 -#define BTN_TOOL_PENCIL 0x143 -#define BTN_TOOL_AIRBRUSH 0x144 -#define BTN_TOOL_FINGER 0x145 -#define BTN_TOOL_MOUSE 0x146 -#define BTN_TOOL_LENS 0x147 -#define BTN_TOOL_QUINTTAP 0x148 /* Five fingers on trackpad */ -#define BTN_TOUCH 0x14a -#define BTN_STYLUS 0x14b -#define BTN_STYLUS2 0x14c -#define BTN_TOOL_DOUBLETAP 0x14d -#define BTN_TOOL_TRIPLETAP 0x14e -#define BTN_TOOL_QUADTAP 0x14f /* Four fingers on trackpad */ - -#define BTN_WHEEL 0x150 -#define BTN_GEAR_DOWN 0x150 -#define BTN_GEAR_UP 0x151 - -#define KEY_OK 0x160 -#define KEY_SELECT 0x161 -#define KEY_GOTO 0x162 -#define KEY_CLEAR 0x163 -#define KEY_POWER2 0x164 -#define KEY_OPTION 0x165 -#define KEY_INFO 0x166 /* AL OEM Features/Tips/Tutorial */ -#define KEY_TIME 0x167 -#define KEY_VENDOR 0x168 -#define KEY_ARCHIVE 0x169 -#define KEY_PROGRAM 0x16a /* Media Select Program Guide */ -#define KEY_CHANNEL 0x16b -#define KEY_FAVORITES 0x16c -#define KEY_EPG 0x16d -#define KEY_PVR 0x16e /* Media Select Home */ -#define KEY_MHP 0x16f -#define KEY_LANGUAGE 0x170 -#define KEY_TITLE 0x171 -#define KEY_SUBTITLE 0x172 -#define KEY_ANGLE 0x173 -#define KEY_ZOOM 0x174 -#define KEY_MODE 0x175 -#define KEY_KEYBOARD 0x176 -#define KEY_SCREEN 0x177 -#define KEY_PC 0x178 /* Media Select Computer */ -#define KEY_TV 0x179 /* Media Select TV */ -#define KEY_TV2 0x17a /* Media Select Cable */ -#define KEY_VCR 0x17b /* Media Select VCR */ -#define KEY_VCR2 0x17c /* VCR Plus */ -#define KEY_SAT 0x17d /* Media Select Satellite */ -#define KEY_SAT2 0x17e -#define KEY_CD 0x17f /* Media Select CD */ -#define KEY_TAPE 0x180 /* Media Select Tape */ -#define KEY_RADIO 0x181 -#define KEY_TUNER 0x182 /* Media Select Tuner */ -#define KEY_PLAYER 0x183 -#define KEY_TEXT 0x184 -#define KEY_DVD 0x185 /* Media Select DVD */ -#define KEY_AUX 0x186 -#define KEY_MP3 0x187 -#define KEY_AUDIO 0x188 /* AL Audio Browser */ -#define KEY_VIDEO 0x189 /* AL Movie Browser */ -#define KEY_DIRECTORY 0x18a -#define KEY_LIST 0x18b -#define KEY_MEMO 0x18c /* Media Select Messages */ -#define KEY_CALENDAR 0x18d -#define KEY_RED 0x18e -#define KEY_GREEN 0x18f -#define KEY_YELLOW 0x190 -#define KEY_BLUE 0x191 -#define KEY_CHANNELUP 0x192 /* Channel Increment */ -#define KEY_CHANNELDOWN 0x193 /* Channel Decrement */ -#define KEY_FIRST 0x194 -#define KEY_LAST 0x195 /* Recall Last */ -#define KEY_AB 0x196 -#define KEY_NEXT 0x197 -#define KEY_RESTART 0x198 -#define KEY_SLOW 0x199 -#define KEY_SHUFFLE 0x19a -#define KEY_BREAK 0x19b -#define KEY_PREVIOUS 0x19c -#define KEY_DIGITS 0x19d -#define KEY_TEEN 0x19e -#define KEY_TWEN 0x19f -#define KEY_VIDEOPHONE 0x1a0 /* Media Select Video Phone */ -#define KEY_GAMES 0x1a1 /* Media Select Games */ -#define KEY_ZOOMIN 0x1a2 /* AC Zoom In */ -#define KEY_ZOOMOUT 0x1a3 /* AC Zoom Out */ -#define KEY_ZOOMRESET 0x1a4 /* AC Zoom */ -#define KEY_WORDPROCESSOR 0x1a5 /* AL Word Processor */ -#define KEY_EDITOR 0x1a6 /* AL Text Editor */ -#define KEY_SPREADSHEET 0x1a7 /* AL Spreadsheet */ -#define KEY_GRAPHICSEDITOR 0x1a8 /* AL Graphics Editor */ -#define KEY_PRESENTATION 0x1a9 /* AL Presentation App */ -#define KEY_DATABASE 0x1aa /* AL Database App */ -#define KEY_NEWS 0x1ab /* AL Newsreader */ -#define KEY_VOICEMAIL 0x1ac /* AL Voicemail */ -#define KEY_ADDRESSBOOK 0x1ad /* AL Contacts/Address Book */ -#define KEY_MESSENGER 0x1ae /* AL Instant Messaging */ -#define KEY_DISPLAYTOGGLE 0x1af /* Turn display (LCD) on and off */ -#define KEY_SPELLCHECK 0x1b0 /* AL Spell Check */ -#define KEY_LOGOFF 0x1b1 /* AL Logoff */ - -#define KEY_DOLLAR 0x1b2 -#define KEY_EURO 0x1b3 - -#define KEY_FRAMEBACK 0x1b4 /* Consumer - transport controls */ -#define KEY_FRAMEFORWARD 0x1b5 -#define KEY_CONTEXT_MENU 0x1b6 /* GenDesc - system context menu */ -#define KEY_MEDIA_REPEAT 0x1b7 /* Consumer - transport control */ -#define KEY_10CHANNELSUP 0x1b8 /* 10 channels up (10+) */ -#define KEY_10CHANNELSDOWN 0x1b9 /* 10 channels down (10-) */ -#define KEY_IMAGES 0x1ba /* AL Image Browser */ - -#define KEY_DEL_EOL 0x1c0 -#define KEY_DEL_EOS 0x1c1 -#define KEY_INS_LINE 0x1c2 -#define KEY_DEL_LINE 0x1c3 - -#define KEY_FN 0x1d0 -#define KEY_FN_ESC 0x1d1 -#define KEY_FN_F1 0x1d2 -#define KEY_FN_F2 0x1d3 -#define KEY_FN_F3 0x1d4 -#define KEY_FN_F4 0x1d5 -#define KEY_FN_F5 0x1d6 -#define KEY_FN_F6 0x1d7 -#define KEY_FN_F7 0x1d8 -#define KEY_FN_F8 0x1d9 -#define KEY_FN_F9 0x1da -#define KEY_FN_F10 0x1db -#define KEY_FN_F11 0x1dc -#define KEY_FN_F12 0x1dd -#define KEY_FN_1 0x1de -#define KEY_FN_2 0x1df -#define KEY_FN_D 0x1e0 -#define KEY_FN_E 0x1e1 -#define KEY_FN_F 0x1e2 -#define KEY_FN_S 0x1e3 -#define KEY_FN_B 0x1e4 - -#define KEY_BRL_DOT1 0x1f1 -#define KEY_BRL_DOT2 0x1f2 -#define KEY_BRL_DOT3 0x1f3 -#define KEY_BRL_DOT4 0x1f4 -#define KEY_BRL_DOT5 0x1f5 -#define KEY_BRL_DOT6 0x1f6 -#define KEY_BRL_DOT7 0x1f7 -#define KEY_BRL_DOT8 0x1f8 -#define KEY_BRL_DOT9 0x1f9 -#define KEY_BRL_DOT10 0x1fa - -#define KEY_NUMERIC_0 0x200 /* used by phones, remote controls, */ -#define KEY_NUMERIC_1 0x201 /* and other keypads */ -#define KEY_NUMERIC_2 0x202 -#define KEY_NUMERIC_3 0x203 -#define KEY_NUMERIC_4 0x204 -#define KEY_NUMERIC_5 0x205 -#define KEY_NUMERIC_6 0x206 -#define KEY_NUMERIC_7 0x207 -#define KEY_NUMERIC_8 0x208 -#define KEY_NUMERIC_9 0x209 -#define KEY_NUMERIC_STAR 0x20a -#define KEY_NUMERIC_POUND 0x20b - -#define KEY_CAMERA_FOCUS 0x210 -#define KEY_WPS_BUTTON 0x211 /* WiFi Protected Setup key */ - -#define KEY_TOUCHPAD_TOGGLE 0x212 /* Request switch touchpad on or off */ -#define KEY_TOUCHPAD_ON 0x213 -#define KEY_TOUCHPAD_OFF 0x214 - -#define KEY_CAMERA_ZOOMIN 0x215 -#define KEY_CAMERA_ZOOMOUT 0x216 -#define KEY_CAMERA_UP 0x217 -#define KEY_CAMERA_DOWN 0x218 -#define KEY_CAMERA_LEFT 0x219 -#define KEY_CAMERA_RIGHT 0x21a - -#define BTN_TRIGGER_HAPPY 0x2c0 -#define BTN_TRIGGER_HAPPY1 0x2c0 -#define BTN_TRIGGER_HAPPY2 0x2c1 -#define BTN_TRIGGER_HAPPY3 0x2c2 -#define BTN_TRIGGER_HAPPY4 0x2c3 -#define BTN_TRIGGER_HAPPY5 0x2c4 -#define BTN_TRIGGER_HAPPY6 0x2c5 -#define BTN_TRIGGER_HAPPY7 0x2c6 -#define BTN_TRIGGER_HAPPY8 0x2c7 -#define BTN_TRIGGER_HAPPY9 0x2c8 -#define BTN_TRIGGER_HAPPY10 0x2c9 -#define BTN_TRIGGER_HAPPY11 0x2ca -#define BTN_TRIGGER_HAPPY12 0x2cb -#define BTN_TRIGGER_HAPPY13 0x2cc -#define BTN_TRIGGER_HAPPY14 0x2cd -#define BTN_TRIGGER_HAPPY15 0x2ce -#define BTN_TRIGGER_HAPPY16 0x2cf -#define BTN_TRIGGER_HAPPY17 0x2d0 -#define BTN_TRIGGER_HAPPY18 0x2d1 -#define BTN_TRIGGER_HAPPY19 0x2d2 -#define BTN_TRIGGER_HAPPY20 0x2d3 -#define BTN_TRIGGER_HAPPY21 0x2d4 -#define BTN_TRIGGER_HAPPY22 0x2d5 -#define BTN_TRIGGER_HAPPY23 0x2d6 -#define BTN_TRIGGER_HAPPY24 0x2d7 -#define BTN_TRIGGER_HAPPY25 0x2d8 -#define BTN_TRIGGER_HAPPY26 0x2d9 -#define BTN_TRIGGER_HAPPY27 0x2da -#define BTN_TRIGGER_HAPPY28 0x2db -#define BTN_TRIGGER_HAPPY29 0x2dc -#define BTN_TRIGGER_HAPPY30 0x2dd -#define BTN_TRIGGER_HAPPY31 0x2de -#define BTN_TRIGGER_HAPPY32 0x2df -#define BTN_TRIGGER_HAPPY33 0x2e0 -#define BTN_TRIGGER_HAPPY34 0x2e1 -#define BTN_TRIGGER_HAPPY35 0x2e2 -#define BTN_TRIGGER_HAPPY36 0x2e3 -#define BTN_TRIGGER_HAPPY37 0x2e4 -#define BTN_TRIGGER_HAPPY38 0x2e5 -#define BTN_TRIGGER_HAPPY39 0x2e6 -#define BTN_TRIGGER_HAPPY40 0x2e7 - -/* We avoid low common keys in module aliases so they don't get huge. */ -#define KEY_MIN_INTERESTING KEY_MUTE -#define KEY_MAX 0x2ff -#define KEY_CNT (KEY_MAX+1) - -/* - * Relative axes - */ - -#define REL_X 0x00 -#define REL_Y 0x01 -#define REL_Z 0x02 -#define REL_RX 0x03 -#define REL_RY 0x04 -#define REL_RZ 0x05 -#define REL_HWHEEL 0x06 -#define REL_DIAL 0x07 -#define REL_WHEEL 0x08 -#define REL_MISC 0x09 -#define REL_MAX 0x0f -#define REL_CNT (REL_MAX+1) - -/* - * Absolute axes - */ - -#define ABS_X 0x00 -#define ABS_Y 0x01 -#define ABS_Z 0x02 -#define ABS_RX 0x03 -#define ABS_RY 0x04 -#define ABS_RZ 0x05 -#define ABS_THROTTLE 0x06 -#define ABS_RUDDER 0x07 -#define ABS_WHEEL 0x08 -#define ABS_GAS 0x09 -#define ABS_BRAKE 0x0a -#define ABS_HAT0X 0x10 -#define ABS_HAT0Y 0x11 -#define ABS_HAT1X 0x12 -#define ABS_HAT1Y 0x13 -#define ABS_HAT2X 0x14 -#define ABS_HAT2Y 0x15 -#define ABS_HAT3X 0x16 -#define ABS_HAT3Y 0x17 -#define ABS_PRESSURE 0x18 -#define ABS_DISTANCE 0x19 -#define ABS_TILT_X 0x1a -#define ABS_TILT_Y 0x1b -#define ABS_TOOL_WIDTH 0x1c - -#define ABS_VOLUME 0x20 - -#define ABS_MISC 0x28 - -#define ABS_MT_SLOT 0x2f /* MT slot being modified */ -#define ABS_MT_TOUCH_MAJOR 0x30 /* Major axis of touching ellipse */ -#define ABS_MT_TOUCH_MINOR 0x31 /* Minor axis (omit if circular) */ -#define ABS_MT_WIDTH_MAJOR 0x32 /* Major axis of approaching ellipse */ -#define ABS_MT_WIDTH_MINOR 0x33 /* Minor axis (omit if circular) */ -#define ABS_MT_ORIENTATION 0x34 /* Ellipse orientation */ -#define ABS_MT_POSITION_X 0x35 /* Center X touch position */ -#define ABS_MT_POSITION_Y 0x36 /* Center Y touch position */ -#define ABS_MT_TOOL_TYPE 0x37 /* Type of touching device */ -#define ABS_MT_BLOB_ID 0x38 /* Group a set of packets as a blob */ -#define ABS_MT_TRACKING_ID 0x39 /* Unique ID of initiated contact */ -#define ABS_MT_PRESSURE 0x3a /* Pressure on contact area */ -#define ABS_MT_DISTANCE 0x3b /* Contact hover distance */ -#define ABS_MT_TOOL_X 0x3c /* Center X tool position */ -#define ABS_MT_TOOL_Y 0x3d /* Center Y tool position */ - -#ifdef __KERNEL__ +#include <uapi/linux/input.h> /* Implementation details, userspace should not care about these */ #define ABS_MT_FIRST ABS_MT_TOUCH_MAJOR #define ABS_MT_LAST ABS_MT_TOOL_Y -#endif - -#define ABS_MAX 0x3f -#define ABS_CNT (ABS_MAX+1) - -/* - * Switch events - */ - -#define SW_LID 0x00 /* set = lid shut */ -#define SW_TABLET_MODE 0x01 /* set = tablet mode */ -#define SW_HEADPHONE_INSERT 0x02 /* set = inserted */ -#define SW_RFKILL_ALL 0x03 /* rfkill master switch, type "any" - set = radio enabled */ -#define SW_RADIO SW_RFKILL_ALL /* deprecated */ -#define SW_MICROPHONE_INSERT 0x04 /* set = inserted */ -#define SW_DOCK 0x05 /* set = plugged into dock */ -#define SW_LINEOUT_INSERT 0x06 /* set = inserted */ -#define SW_JACK_PHYSICAL_INSERT 0x07 /* set = mechanical switch set */ -#define SW_VIDEOOUT_INSERT 0x08 /* set = inserted */ -#define SW_CAMERA_LENS_COVER 0x09 /* set = lens covered */ -#define SW_KEYPAD_SLIDE 0x0a /* set = keypad slide out */ -#define |