diff options
| -rw-r--r-- | drivers/thermal/devfreq_cooling.c | 307 | ||||
| -rw-r--r-- | include/linux/devfreq_cooling.h | 17 |
2 files changed, 97 insertions, 227 deletions
diff --git a/drivers/thermal/devfreq_cooling.c b/drivers/thermal/devfreq_cooling.c index 6cea027d89a3..df1049a34777 100644 --- a/drivers/thermal/devfreq_cooling.c +++ b/drivers/thermal/devfreq_cooling.c @@ -34,20 +34,17 @@ static DEFINE_IDA(devfreq_ida); * @cdev: Pointer to associated thermal cooling device. * @devfreq: Pointer to associated devfreq device. * @cooling_state: Current cooling state. - * @power_table: Pointer to table with maximum power draw for each - * cooling state. State is the index into the table, and - * the power is in mW. * @freq_table: Pointer to a table with the frequencies sorted in descending * order. You can index the table by cooling device state - * @freq_table_size: Size of the @freq_table and @power_table - * @power_ops: Pointer to devfreq_cooling_power, used to generate the - * @power_table. + * @max_state: It is the last index, that is, one less than the number of the + * OPPs + * @power_ops: Pointer to devfreq_cooling_power, a more precised model. * @res_util: Resource utilization scaling factor for the power. * It is multiplied by 100 to minimize the error. It is used * for estimation of the power budget instead of using - * 'utilization' (which is 'busy_time / 'total_time'). - * The 'res_util' range is from 100 to (power_table[state] * 100) - * for the corresponding 'state'. + * 'utilization' (which is 'busy_time' / 'total_time'). + * The 'res_util' range is from 100 to power * 100 for the + * corresponding 'state'. * @capped_state: index to cooling state with in dynamic power budget * @req_max_freq: PM QoS request for limiting the maximum frequency * of the devfreq device. @@ -57,9 +54,8 @@ struct devfreq_cooling_device { struct thermal_cooling_device *cdev; struct devfreq *devfreq; unsigned long cooling_state; - u32 *power_table; u32 *freq_table; - size_t freq_table_size; + size_t max_state; struct devfreq_cooling_power *power_ops; u32 res_util; int capped_state; @@ -71,7 +67,7 @@ static int devfreq_cooling_get_max_state(struct thermal_cooling_device *cdev, { struct devfreq_cooling_device *dfc = cdev->devdata; - *state = dfc->freq_table_size - 1; + *state = dfc->max_state; return 0; } @@ -93,16 +89,22 @@ static int devfreq_cooling_set_cur_state(struct thermal_cooling_device *cdev, struct devfreq *df = dfc->devfreq; struct device *dev = df->dev.parent; unsigned long freq; + int perf_idx; if (state == dfc->cooling_state) return 0; dev_dbg(dev, "Setting cooling state %lu\n", state); - if (state >= dfc->freq_table_size) + if (state > dfc->max_state) return -EINVAL; - freq = dfc->freq_table[state]; + if (dev->em_pd) { + perf_idx = dfc->max_state - state; + freq = dev->em_pd->table[perf_idx].frequency * 1000; + } else { + freq = dfc->freq_table[state]; + } dev_pm_qos_update_request(&dfc->req_max_freq, DIV_ROUND_UP(freq, HZ_PER_KHZ)); @@ -113,24 +115,23 @@ static int devfreq_cooling_set_cur_state(struct thermal_cooling_device *cdev, } /** - * freq_get_state() - get the cooling state corresponding to a frequency - * @dfc: Pointer to devfreq cooling device - * @freq: frequency in Hz + * get_perf_idx() - get the performance index corresponding to a frequency + * @em_pd: Pointer to device's Energy Model + * @freq: frequency in kHz * - * Return: the cooling state associated with the @freq, or - * THERMAL_CSTATE_INVALID if it wasn't found. + * Return: the performance index associated with the @freq, or + * -EINVAL if it wasn't found. */ -static unsigned long -freq_get_state(struct devfreq_cooling_device *dfc, unsigned long freq) +static int get_perf_idx(struct em_perf_domain *em_pd, unsigned long freq) { int i; - for (i = 0; i < dfc->freq_table_size; i++) { - if (dfc->freq_table[i] == freq) + for (i = 0; i < em_pd->nr_perf_states; i++) { + if (em_pd->table[i].frequency == freq) return i; } - return THERMAL_CSTATE_INVALID; + return -EINVAL; } static unsigned long get_voltage(struct devfreq *df, unsigned long freq) @@ -161,73 +162,6 @@ static unsigned long get_voltage(struct devfreq *df, unsigned long freq) return voltage; } -/** - * get_static_power() - calculate the static power - * @dfc: Pointer to devfreq cooling device - * @freq: Frequency in Hz - * - * Calculate the static power in milliwatts using the supplied - * get_static_power(). The current voltage is calculated using the - * OPP library. If no get_static_power() was supplied, assume the - * static power is negligible. - */ -static unsigned long -get_static_power(struct devfreq_cooling_device *dfc, unsigned long freq) -{ - struct devfreq *df = dfc->devfreq; - unsigned long voltage; - - if (!dfc->power_ops->get_static_power) - return 0; - - voltage = get_voltage(df, freq); - - if (voltage == 0) - return 0; - - return dfc->power_ops->get_static_power(df, voltage); -} - -/** - * get_dynamic_power - calculate the dynamic power - * @dfc: Pointer to devfreq cooling device - * @freq: Frequency in Hz - * @voltage: Voltage in millivolts - * - * Calculate the dynamic power in milliwatts consumed by the device at - * frequency @freq and voltage @voltage. If the get_dynamic_power() - * was supplied as part of the devfreq_cooling_power struct, then that - * function is used. Otherwise, a simple power model (Pdyn = Coeff * - * Voltage^2 * Frequency) is used. - */ -static unsigned long -get_dynamic_power(struct devfreq_cooling_device *dfc, unsigned long freq, - unsigned long voltage) -{ - u64 power; - u32 freq_mhz; - struct devfreq_cooling_power *dfc_power = dfc->power_ops; - - if (dfc_power->get_dynamic_power) - return dfc_power->get_dynamic_power(dfc->devfreq, freq, - voltage); - - freq_mhz = freq / 1000000; - power = (u64)dfc_power->dyn_power_coeff * freq_mhz * voltage * voltage; - do_div(power, 1000000000); - - return power; -} - - -static inline unsigned long get_total_power(struct devfreq_cooling_device *dfc, - unsigned long freq, - unsigned long voltage) -{ - return get_static_power(dfc, freq) + get_dynamic_power(dfc, freq, - voltage); -} - static void _normalize_load(struct devfreq_dev_status *status) { if (status->total_time > 0xfffff) { @@ -247,13 +181,12 @@ static int devfreq_cooling_get_requested_power(struct thermal_cooling_device *cd { struct devfreq_cooling_device *dfc = cdev->devdata; struct devfreq *df = dfc->devfreq; + struct device *dev = df->dev.parent; struct devfreq_dev_status status; unsigned long state; unsigned long freq; unsigned long voltage; - u32 dyn_power = 0; - u32 static_power = 0; - int res; + int res, perf_idx; mutex_lock(&df->lock); status = df->last_status; @@ -261,13 +194,7 @@ static int devfreq_cooling_get_requested_power(struct thermal_cooling_device *cd freq = status.current_frequency; - state = freq_get_state(dfc, freq); - if (state == THERMAL_CSTATE_INVALID) { - res = -EAGAIN; - goto fail; - } - - if (dfc->power_ops->get_real_power) { + if (dfc->power_ops && dfc->power_ops->get_real_power) { voltage = get_voltage(df, freq); if (voltage == 0) { res = -EINVAL; @@ -277,7 +204,7 @@ static int devfreq_cooling_get_requested_power(struct thermal_cooling_device *cd res = dfc->power_ops->get_real_power(df, power, freq, voltage); if (!res) { state = dfc->capped_state; - dfc->res_util = dfc->power_table[state]; + dfc->res_util = dev->em_pd->table[state].power; dfc->res_util *= SCALE_ERROR_MITIGATION; if (*power > 1) @@ -286,17 +213,19 @@ static int devfreq_cooling_get_requested_power(struct thermal_cooling_device *cd goto fail; } } else { - dyn_power = dfc->power_table[state]; + /* Energy Model frequencies are in kHz */ + perf_idx = get_perf_idx(dev->em_pd, freq / 1000); + if (perf_idx < 0) { + res = -EAGAIN; + goto fail; + } _normalize_load(&status); - /* Scale dynamic power for utilization */ - dyn_power *= status.busy_time; - dyn_power >>= 10; - /* Get static power */ - static_power = get_static_power(dfc, freq); - - *power = dyn_power + static_power; + /* Scale power for utilization */ + *power = dev->em_pd->table[perf_idx].power; + *power *= status.busy_time; + *power >>= 10; } trace_thermal_power_devfreq_get_power(cdev, &status, freq, *power); @@ -309,20 +238,19 @@ fail: } static int devfreq_cooling_state2power(struct thermal_cooling_device *cdev, - unsigned long state, - u32 *power) + unsigned long state, u32 *power) { struct devfreq_cooling_device *dfc = cdev->devdata; - unsigned long freq; - u32 static_power; + struct devfreq *df = dfc->devfreq; + struct device *dev = df->dev.parent; + int perf_idx; - if (state >= dfc->freq_table_size) + if (state > dfc->max_state) return -EINVAL; - freq = dfc->freq_table[state]; - static_power = get_static_power(dfc, freq); + perf_idx = dfc->max_state - state; + *power = dev->em_pd->table[perf_idx].power; - *power = dfc->power_table[state] + static_power; return 0; } @@ -331,10 +259,9 @@ static int devfreq_cooling_power2state(struct thermal_cooling_device *cdev, { struct devfreq_cooling_device *dfc = cdev->devdata; struct devfreq *df = dfc->devfreq; + struct device *dev = df->dev.parent; struct devfreq_dev_status status; unsigned long freq; - s32 dyn_power; - u32 static_power; s32 est_power; int i; @@ -344,32 +271,28 @@ static int devfreq_cooling_power2state(struct thermal_cooling_device *cdev, freq = status.current_frequency; - if (dfc->power_ops->get_real_power) { + if (dfc->power_ops && dfc->power_ops->get_real_power) { /* Scale for resource utilization */ est_power = power * dfc->res_util; est_power /= SCALE_ERROR_MITIGATION; } else { - static_power = get_static_power(dfc, freq); - - dyn_power = power - static_power; - dyn_power = dyn_power > 0 ? dyn_power : 0; - /* Scale dynamic power for utilization */ _normalize_load(&status); - dyn_power <<= 10; - est_power = dyn_power / status.busy_time; + est_power = power << 10; + est_power /= status.busy_time; } /* * Find the first cooling state that is within the power - * budget for dynamic power. + * budget. The EM power table is sorted ascending. */ - for (i = 0; i < dfc->freq_table_size - 1; i++) - if (est_power >= dfc->power_table[i]) + for (i = dfc->max_state; i > 0; i--) + if (est_power >= dev->em_pd->table[i].power) break; - *state = i; - dfc->capped_state = i; + *state = dfc->max_state - i; + dfc->capped_state = *state; + trace_thermal_power_devfreq_limit(cdev, freq, *state, power); return 0; } @@ -381,91 +304,43 @@ static struct thermal_cooling_device_ops devfreq_cooling_ops = { }; /** - * devfreq_cooling_gen_tables() - Generate power and freq tables. - * @dfc: Pointer to devfreq cooling device. - * - * Generate power and frequency tables: the power table hold the - * device's maximum power usage at each cooling state (OPP). The - * static and dynamic power using the appropriate voltage and - * frequency for the state, is acquired from the struct - * devfreq_cooling_power, and summed to make the maximum power draw. - * - * The frequency table holds the frequencies in descending order. - * That way its indexed by cooling device state. + * devfreq_cooling_gen_tables() - Generate frequency table. + * @dfc: Pointer to devfreq cooling device. + * @num_opps: Number of OPPs * - * The tables are malloced, and pointers put in dfc. They must be - * freed when unregistering the devfreq cooling device. + * Generate frequency table which holds the frequencies in descending + * order. That way its indexed by cooling device state. This is for + * compatibility with drivers which do not register Energy Model. * * Return: 0 on success, negative error code on failure. */ -static int devfreq_cooling_gen_tables(struct devfreq_cooling_device *dfc) +static int devfreq_cooling_gen_tables(struct devfreq_cooling_device *dfc, + int num_opps) { struct devfreq *df = dfc->devfreq; struct device *dev = df->dev.parent; - int ret, num_opps; unsigned long freq; - u32 *power_table = NULL; - u32 *freq_table; int i; - num_opps = dev_pm_opp_get_opp_count(dev); - - if (dfc->power_ops) { - power_table = kcalloc(num_opps, sizeof(*power_table), - GFP_KERNEL); - if (!power_table) - return -ENOMEM; - } - - freq_table = kcalloc(num_opps, sizeof(*freq_table), + dfc->freq_table = kcalloc(num_opps, sizeof(*dfc->freq_table), GFP_KERNEL); - if (!freq_table) { - ret = -ENOMEM; - goto free_power_table; - } + if (!dfc->freq_table) + return -ENOMEM; for (i = 0, freq = ULONG_MAX; i < num_opps; i++, freq--) { - unsigned long power, voltage; struct dev_pm_opp *opp; opp = dev_pm_opp_find_freq_floor(dev, &freq); if (IS_ERR(opp)) { - ret = PTR_ERR(opp); - goto free_tables; + kfree(dfc->freq_table); + return PTR_ERR(opp); } - voltage = dev_pm_opp_get_voltage(opp) / 1000; /* mV */ dev_pm_opp_put(opp); - - if (dfc->power_ops) { - if (dfc->power_ops->get_real_power) - power = get_total_power(dfc, freq, voltage); - else - power = get_dynamic_power(dfc, freq, voltage); - - dev_dbg(dev, "Power table: %lu MHz @ %lu mV: %lu = %lu mW\n", - freq / 1000000, voltage, power, power); - - power_table[i] = power; - } - - freq_table[i] = freq; + dfc->freq_table[i] = freq; } - if (dfc->power_ops) - dfc->power_table = power_table; - - dfc->freq_table = freq_table; - dfc->freq_table_size = num_opps; - return 0; - -free_tables: - kfree(freq_table); -free_power_table: - kfree(power_table); - - return ret; } /** @@ -488,9 +363,10 @@ of_devfreq_cooling_register_power(struct device_node *np, struct devfreq *df, struct devfreq_cooling_power *dfc_power) { struct thermal_cooling_device *cdev; + struct device *dev = df->dev.parent; struct devfreq_cooling_device *dfc; char dev_name[THERMAL_NAME_LENGTH]; - int err; + int err, num_opps; dfc = kzalloc(sizeof(*dfc), GFP_KERNEL); if (!dfc) @@ -498,28 +374,44 @@ of_devfreq_cooling_register_power(struct device_node *np, struct devfreq *df, dfc->devfreq = df; - if (dfc_power) { - dfc->power_ops = dfc_power; - + if (dev->em_pd) { devfreq_cooling_ops.get_requested_power = devfreq_cooling_get_requested_power; devfreq_cooling_ops.state2power = devfreq_cooling_state2power; devfreq_cooling_ops.power2state = devfreq_cooling_power2state; + + dfc->power_ops = dfc_power; + + num_opps = em_pd_nr_perf_states(dev->em_pd); + } else { + /* Backward compatibility for drivers which do not use IPA */ + dev_dbg(dev, "missing EM for cooling device\n"); + + num_opps = dev_pm_opp_get_opp_count(dev); + + err = devfreq_cooling_gen_tables(dfc, num_opps); + if (err) + goto free_dfc; } - err = devfreq_cooling_gen_tables(dfc); - if (err) + if (num_opps <= 0) { + err = -EINVAL; goto free_dfc; + } + + /* max_state is an index, not a counter */ + dfc->max_state = num_opps - 1; - err = dev_pm_qos_add_request(df->dev.parent, &dfc->req_max_freq, + err = dev_pm_qos_add_request(dev, &dfc->req_max_freq, DEV_PM_QOS_MAX_FREQUENCY, PM_QOS_MAX_FREQUENCY_DEFAULT_VALUE); if (err < 0) - goto free_tables; + goto free_table; err = ida_simple_get(&devfreq_ida, 0, 0, GFP_KERNEL); if (err < 0) goto remove_qos_req; + dfc->id = err; snprintf(dev_name, sizeof(dev_name), "thermal-devfreq-%d", dfc->id); @@ -528,7 +420,7 @@ of_devfreq_cooling_register_power(struct device_node *np, struct devfreq *df, &devfreq_cooling_ops); if (IS_ERR(cdev)) { err = PTR_ERR(cdev); - dev_err(df->dev.parent, + dev_err(dev, "Failed to register devfreq cooling device (%d)\n", err); goto release_ida; @@ -540,12 +432,9 @@ of_devfreq_cooling_register_power(struct device_node *np, struct devfreq *df, release_ida: ida_simple_remove(&devfreq_ida, dfc->id); - remove_qos_req: dev_pm_qos_remove_request(&dfc->req_max_freq); - -free_tables: - kfree(dfc->power_table); +free_table: kfree(dfc->freq_table); free_dfc: kfree(dfc); @@ -644,9 +533,7 @@ void devfreq_cooling_unregister(struct thermal_cooling_device *cdev) em_dev_unregister_perf_domain(dev); - kfree(dfc->power_table); kfree(dfc->freq_table); - kfree(dfc); } EXPORT_SYMBOL_GPL(devfreq_cooling_unregister); diff --git a/include/linux/devfreq_cooling.h b/include/linux/devfreq_cooling.h index 7a9fbcc7b265..14baa73fc2de 100644 --- a/include/linux/devfreq_cooling.h +++ b/include/linux/devfreq_cooling.h @@ -16,17 +16,6 @@ /** * struct devfreq_cooling_power - Devfreq cooling power ops - * @get_static_power: Take voltage, in mV, and return the static power - * in mW. If NULL, the static power is assumed - * to be 0. - * @get_dynamic_power: Take voltage, in mV, and frequency, in HZ, and - * return the dynamic power draw in mW. If NULL, - * a simple power model is used. - * @dyn_power_coeff: Coefficient for the simple dynamic power model in - * mW/(MHz mV mV). - * If get_dynamic_power() is NULL, then the - * dynamic power is calculated as - * @dyn_power_coeff * frequency * voltage^2 * @get_real_power: When this is set, the framework uses it to ask the * device driver for the actual power. * Some devices have more sophisticated methods @@ -46,14 +35,8 @@ * max total (static + dynamic) power value for each OPP. */ struct devfreq_cooling_power { - unsigned long (*get_static_power)(struct devfreq *devfreq, - unsigned long voltage); - unsigned long (*get_dynamic_power)(struct devfreq *devfreq, - unsigned long freq, - unsigned long voltage); int (*get_real_power)(struct devfreq *df, u32 *power, unsigned long freq, unsigned long voltage); - unsigned long dyn_power_coeff; }; #ifdef CONFIG_DEVFREQ_THERMAL |