aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--include/net/mac80211.h35
-rw-r--r--net/mac80211/driver-ops.h17
-rw-r--r--net/mac80211/driver-trace.h22
-rw-r--r--net/mac80211/ieee80211_i.h2
-rw-r--r--net/mac80211/iface.c3
-rw-r--r--net/mac80211/main.c54
-rw-r--r--net/mac80211/mlme.c34
7 files changed, 79 insertions, 88 deletions
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index bbae3d9b1176..3a47877f4965 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -19,7 +19,6 @@
#include <linux/wireless.h>
#include <linux/device.h>
#include <linux/ieee80211.h>
-#include <linux/inetdevice.h>
#include <net/cfg80211.h>
/**
@@ -147,6 +146,7 @@ struct ieee80211_low_level_stats {
* enabled/disabled (beaconing modes)
* @BSS_CHANGED_CQM: Connection quality monitor config changed
* @BSS_CHANGED_IBSS: IBSS join status changed
+ * @BSS_CHANGED_ARP_FILTER: Hardware ARP filter address list or state changed.
*/
enum ieee80211_bss_change {
BSS_CHANGED_ASSOC = 1<<0,
@@ -161,10 +161,18 @@ enum ieee80211_bss_change {
BSS_CHANGED_BEACON_ENABLED = 1<<9,
BSS_CHANGED_CQM = 1<<10,
BSS_CHANGED_IBSS = 1<<11,
+ BSS_CHANGED_ARP_FILTER = 1<<12,
/* when adding here, make sure to change ieee80211_reconfig */
};
+/*
+ * The maximum number of IPv4 addresses listed for ARP filtering. If the number
+ * of addresses for an interface increase beyond this value, hardware ARP
+ * filtering will be disabled.
+ */
+#define IEEE80211_BSS_ARP_ADDR_LIST_LEN 4
+
/**
* struct ieee80211_bss_conf - holds the BSS's changing parameters
*
@@ -200,6 +208,15 @@ enum ieee80211_bss_change {
* @cqm_rssi_thold: Connection quality monitor RSSI threshold, a zero value
* implies disabled
* @cqm_rssi_hyst: Connection quality monitor RSSI hysteresis
+ * @arp_addr_list: List of IPv4 addresses for hardware ARP filtering. The
+ * may filter ARP queries targeted for other addresses than listed here.
+ * The driver must allow ARP queries targeted for all address listed here
+ * to pass through. An empty list implies no ARP queries need to pass.
+ * @arp_addr_cnt: Number of addresses currently on the list.
+ * @arp_filter_enabled: Enable ARP filtering - if enabled, the hardware may
+ * filter ARP queries based on the @arp_addr_list, if disabled, the
+ * hardware must not perform any ARP filtering. Note, that the filter will
+ * be enabled also in promiscuous mode.
*/
struct ieee80211_bss_conf {
const u8 *bssid;
@@ -220,6 +237,9 @@ struct ieee80211_bss_conf {
s32 cqm_rssi_thold;
u32 cqm_rssi_hyst;
enum nl80211_channel_type channel_type;
+ __be32 arp_addr_list[IEEE80211_BSS_ARP_ADDR_LIST_LEN];
+ u8 arp_addr_cnt;
+ bool arp_filter_enabled;
};
/**
@@ -1529,16 +1549,6 @@ enum ieee80211_ampdu_mlme_action {
* of the bss parameters has changed when a call is made. The callback
* can sleep.
*
- * @configure_arp_filter: Configuration function for hardware ARP query filter.
- * This function is called with all the IP addresses configured to the
- * interface as argument - all ARP queries targeted to any of these
- * addresses must pass through. If the hardware filter does not support
- * enought addresses, hardware filtering must be disabled. The ifa_list
- * argument may be NULL, indicating that filtering must be disabled.
- * This function is called upon association complete with current
- * address(es), and while associated whenever the IP address(es) change.
- * The callback can sleep.
- *
* @prepare_multicast: Prepare for multicast filter configuration.
* This callback is optional, and its return value is passed
* to configure_filter(). This callback must be atomic.
@@ -1678,9 +1688,6 @@ struct ieee80211_ops {
struct ieee80211_vif *vif,
struct ieee80211_bss_conf *info,
u32 changed);
- int (*configure_arp_filter)(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif,
- struct in_ifaddr *ifa_list);
u64 (*prepare_multicast)(struct ieee80211_hw *hw,
struct netdev_hw_addr_list *mc_list);
void (*configure_filter)(struct ieee80211_hw *hw,
diff --git a/net/mac80211/driver-ops.h b/net/mac80211/driver-ops.h
index 965d64f68567..c33317320eee 100644
--- a/net/mac80211/driver-ops.h
+++ b/net/mac80211/driver-ops.h
@@ -89,23 +89,6 @@ static inline void drv_bss_info_changed(struct ieee80211_local *local,
trace_drv_return_void(local);
}
-struct in_ifaddr;
-static inline int drv_configure_arp_filter(struct ieee80211_local *local,
- struct ieee80211_vif *vif,
- struct in_ifaddr *ifa_list)
-{
- int ret = 0;
-
- might_sleep();
-
- trace_drv_configure_arp_filter(local, vif_to_sdata(vif));
- if (local->ops->configure_arp_filter)
- ret = local->ops->configure_arp_filter(&local->hw, vif,
- ifa_list);
- trace_drv_return_int(local, ret);
- return ret;
-}
-
static inline u64 drv_prepare_multicast(struct ieee80211_local *local,
struct netdev_hw_addr_list *mc_list)
{
diff --git a/net/mac80211/driver-trace.h b/net/mac80211/driver-trace.h
index 06444ea67bc4..8da31caff931 100644
--- a/net/mac80211/driver-trace.h
+++ b/net/mac80211/driver-trace.h
@@ -251,28 +251,6 @@ TRACE_EVENT(drv_bss_info_changed,
)
);
-TRACE_EVENT(drv_configure_arp_filter,
- TP_PROTO(struct ieee80211_local *local,
- struct ieee80211_sub_if_data *sdata),
-
- TP_ARGS(local, sdata),
-
- TP_STRUCT__entry(
- LOCAL_ENTRY
- VIF_ENTRY
- ),
-
- TP_fast_assign(
- LOCAL_ASSIGN;
- VIF_ASSIGN;
- ),
-
- TP_printk(
- VIF_PR_FMT LOCAL_PR_FMT,
- VIF_PR_ARG, LOCAL_PR_ARG
- )
-);
-
TRACE_EVENT(drv_prepare_multicast,
TP_PROTO(struct ieee80211_local *local, int mc_count),
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index c3c2be3f8a2c..9b3c3f971d28 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -514,6 +514,8 @@ struct ieee80211_sub_if_data {
struct work_struct work;
struct sk_buff_head skb_queue;
+ bool arp_filter_state;
+
/*
* AP this belongs to: self in AP mode and
* corresponding AP in VLAN mode, NULL for
diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c
index 490be2f3af27..910729fc18cd 100644
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -1076,6 +1076,9 @@ int ieee80211_if_add(struct ieee80211_local *local, const char *name,
sdata->wdev.wiphy = local->hw.wiphy;
sdata->local = local;
sdata->dev = ndev;
+#ifdef CONFIG_INET
+ sdata->arp_filter_state = true;
+#endif
for (i = 0; i < IEEE80211_FRAGMENT_MAX; i++)
skb_queue_head_init(&sdata->fragments[i].skb_list);
diff --git a/net/mac80211/main.c b/net/mac80211/main.c
index c2e46e88f3c9..a1bf46c64b93 100644
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -20,6 +20,7 @@
#include <linux/rtnetlink.h>
#include <linux/bitmap.h>
#include <linux/pm_qos_params.h>
+#include <linux/inetdevice.h>
#include <net/net_namespace.h>
#include <net/cfg80211.h>
@@ -317,23 +318,6 @@ static void ieee80211_recalc_smps_work(struct work_struct *work)
}
#ifdef CONFIG_INET
-int ieee80211_set_arp_filter(struct ieee80211_sub_if_data *sdata)
-{
- struct in_device *idev;
- int ret = 0;
-
- BUG_ON(!sdata);
- ASSERT_RTNL();
-
- idev = sdata->dev->ip_ptr;
- if (!idev)
- return 0;
-
- ret = drv_configure_arp_filter(sdata->local, &sdata->vif,
- idev->ifa_list);
- return ret;
-}
-
static int ieee80211_ifa_changed(struct notifier_block *nb,
unsigned long data, void *arg)
{
@@ -343,8 +327,11 @@ static int ieee80211_ifa_changed(struct notifier_block *nb,
ifa_notifier);
struct net_device *ndev = ifa->ifa_dev->dev;
struct wireless_dev *wdev = ndev->ieee80211_ptr;
+ struct in_device *idev;
struct ieee80211_sub_if_data *sdata;
+ struct ieee80211_bss_conf *bss_conf;
struct ieee80211_if_managed *ifmgd;
+ int c = 0;
if (!netif_running(ndev))
return NOTIFY_DONE;
@@ -356,17 +343,44 @@ static int ieee80211_ifa_changed(struct notifier_block *nb,
if (wdev->wiphy != local->hw.wiphy)
return NOTIFY_DONE;
- /* We are concerned about IP addresses only when associated */
sdata = IEEE80211_DEV_TO_SUB_IF(ndev);
+ bss_conf = &sdata->vif.bss_conf;
/* ARP filtering is only supported in managed mode */
if (sdata->vif.type != NL80211_IFTYPE_STATION)
return NOTIFY_DONE;
+ idev = sdata->dev->ip_ptr;
+ if (!idev)
+ return NOTIFY_DONE;
+
ifmgd = &sdata->u.mgd;
mutex_lock(&ifmgd->mtx);
- if (ifmgd->associated)
- ieee80211_set_arp_filter(sdata);
+
+ /* Copy the addresses to the bss_conf list */
+ ifa = idev->ifa_list;
+ while (c < IEEE80211_BSS_ARP_ADDR_LIST_LEN && ifa) {
+ bss_conf->arp_addr_list[c] = ifa->ifa_address;
+ ifa = ifa->ifa_next;
+ c++;
+ }
+
+ /* If not all addresses fit the list, disable filtering */
+ if (ifa) {
+ sdata->arp_filter_state = false;
+ c = 0;
+ } else {
+ sdata->arp_filter_state = true;
+ }
+ bss_conf->arp_addr_cnt = c;
+
+ /* Configure driver only if associated */
+ if (ifmgd->associated) {
+ bss_conf->arp_filter_enabled = sdata->arp_filter_state;
+ ieee80211_bss_info_change_notify(sdata,
+ BSS_CHANGED_ARP_FILTER);
+ }
+
mutex_unlock(&ifmgd->mtx);
return NOTIFY_DONE;
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 583b34686a26..74479c2d12d4 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -806,11 +806,12 @@ static void ieee80211_set_associated(struct ieee80211_sub_if_data *sdata,
{
struct ieee80211_bss *bss = (void *)cbss->priv;
struct ieee80211_local *local = sdata->local;
+ struct ieee80211_bss_conf *bss_conf = &sdata->vif.bss_conf;
bss_info_changed |= BSS_CHANGED_ASSOC;
/* set timing information */
- sdata->vif.bss_conf.beacon_int = cbss->beacon_interval;
- sdata->vif.bss_conf.timestamp = cbss->tsf;
+ bss_conf->beacon_int = cbss->beacon_interval;
+ bss_conf->timestamp = cbss->tsf;
bss_info_changed |= BSS_CHANGED_BEACON_INT;
bss_info_changed |= ieee80211_handle_bss_capability(sdata,
@@ -835,7 +836,7 @@ static void ieee80211_set_associated(struct ieee80211_sub_if_data *sdata,
ieee80211_led_assoc(local, 1);
- sdata->vif.bss_conf.assoc = 1;
+ bss_conf->assoc = 1;
/*
* For now just always ask the driver to update the basic rateset
* when we have associated, we aren't checking whether it actually
@@ -848,9 +849,15 @@ static void ieee80211_set_associated(struct ieee80211_sub_if_data *sdata,
/* Tell the driver to monitor connection quality (if supported) */
if ((local->hw.flags & IEEE80211_HW_SUPPORTS_CQM_RSSI) &&
- sdata->vif.bss_conf.cqm_rssi_thold)
+ bss_conf->cqm_rssi_thold)
bss_info_changed |= BSS_CHANGED_CQM;
+ /* Enable ARP filtering */
+ if (bss_conf->arp_filter_enabled != sdata->arp_filter_state) {
+ bss_conf->arp_filter_enabled = sdata->arp_filter_state;
+ bss_info_changed |= BSS_CHANGED_ARP_FILTER;
+ }
+
ieee80211_bss_info_change_notify(sdata, bss_info_changed);
mutex_lock(&local->iflist_mtx);
@@ -932,6 +939,12 @@ static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata,
ieee80211_hw_config(local, config_changed);
+ /* Disable ARP filtering */
+ if (sdata->vif.bss_conf.arp_filter_enabled) {
+ sdata->vif.bss_conf.arp_filter_enabled = false;
+ changed |= BSS_CHANGED_ARP_FILTER;
+ }
+
/* The BSSID (not really interesting) and HT changed */
changed |= BSS_CHANGED_BSSID | BSS_CHANGED_HT;
ieee80211_bss_info_change_notify(sdata, changed);
@@ -2018,18 +2031,9 @@ static enum work_done_result ieee80211_assoc_done(struct ieee80211_work *wk,
cfg80211_send_assoc_timeout(wk->sdata->dev,
wk->filter_ta);
return WORK_DONE_DESTROY;
- } else {
- mutex_unlock(&wk->sdata->u.mgd.mtx);
-#ifdef CONFIG_INET
- /*
- * configure ARP filter IP addresses to the driver,
- * intentionally outside the mgd mutex.
- */
- rtnl_lock();
- ieee80211_set_arp_filter(wk->sdata);
- rtnl_unlock();
-#endif
}
+
+ mutex_unlock(&wk->sdata->u.mgd.mtx);
}
cfg80211_send_rx_assoc(wk->sdata->dev, skb->data, skb->len);