diff options
| -rw-r--r-- | Documentation/networking/bonding.txt | 30 | ||||
| -rw-r--r-- | drivers/net/bonding/bond_main.c | 89 |
2 files changed, 88 insertions, 31 deletions
diff --git a/Documentation/networking/bonding.txt b/Documentation/networking/bonding.txt index 6b1c7110534e..10a015c384b8 100644 --- a/Documentation/networking/bonding.txt +++ b/Documentation/networking/bonding.txt @@ -752,12 +752,22 @@ xmit_hash_policy protocol information to generate the hash. Uses XOR of hardware MAC addresses and IP addresses to - generate the hash. The formula is + generate the hash. The IPv4 formula is (((source IP XOR dest IP) AND 0xffff) XOR ( source MAC XOR destination MAC )) modulo slave count + The IPv6 formula is + + hash = (source ip quad 2 XOR dest IP quad 2) XOR + (source ip quad 3 XOR dest IP quad 3) XOR + (source ip quad 4 XOR dest IP quad 4) + + (((hash >> 24) XOR (hash >> 16) XOR (hash >> 8) XOR hash) + XOR (source MAC XOR destination MAC)) + modulo slave count + This algorithm will place all traffic to a particular network peer on the same slave. For non-IP traffic, the formula is the same as for the layer2 transmit @@ -778,19 +788,29 @@ xmit_hash_policy slaves, although a single connection will not span multiple slaves. - The formula for unfragmented TCP and UDP packets is + The formula for unfragmented IPv4 TCP and UDP packets is ((source port XOR dest port) XOR ((source IP XOR dest IP) AND 0xffff) modulo slave count - For fragmented TCP or UDP packets and all other IP - protocol traffic, the source and destination port + The formula for unfragmented IPv6 TCP and UDP packets is + + hash = (source port XOR dest port) XOR + ((source ip quad 2 XOR dest IP quad 2) XOR + (source ip quad 3 XOR dest IP quad 3) XOR + (source ip quad 4 XOR dest IP quad 4)) + + ((hash >> 24) XOR (hash >> 16) XOR (hash >> 8) XOR hash) + modulo slave count + + For fragmented TCP or UDP packets and all other IPv4 and + IPv6 protocol traffic, the source and destination port information is omitted. For non-IP traffic, the formula is the same as for the layer2 transmit hash policy. - This policy is intended to mimic the behavior of + The IPv4 policy is intended to mimic the behavior of certain switches, notably Cisco switches with PFC2 as well as some Foundry and IBM products. diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index a86174c9fed1..b24ce257ac7b 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -3352,56 +3352,93 @@ static struct notifier_block bond_netdev_notifier = { /*---------------------------- Hashing Policies -----------------------------*/ /* + * Hash for the output device based upon layer 2 data + */ +static int bond_xmit_hash_policy_l2(struct sk_buff *skb, int count) +{ + struct ethhdr *data = (struct ethhdr *)skb->data; + + if (skb_headlen(skb) >= offsetof(struct ethhdr, h_proto)) + return (data->h_dest[5] ^ data->h_source[5]) % count; + + return 0; +} + +/* * Hash for the output device based upon layer 2 and layer 3 data. If - * the packet is not IP mimic bond_xmit_hash_policy_l2() + * the packet is not IP, fall back on bond_xmit_hash_policy_l2() */ static int bond_xmit_hash_policy_l23(struct sk_buff *skb, int count) { struct ethhdr *data = (struct ethhdr *)skb->data; - struct iphdr *iph = ip_hdr(skb); - - if (skb->protocol == htons(ETH_P_IP)) { + struct iphdr *iph; + struct ipv6hdr *ipv6h; + u32 v6hash; + __be32 *s, *d; + + if (skb->protocol == htons(ETH_P_IP) && + skb_network_header_len(skb) >= sizeof(*iph)) { + iph = ip_hdr(skb); return ((ntohl(iph->saddr ^ iph->daddr) & 0xffff) ^ (data->h_dest[5] ^ data->h_source[5])) % count; + } else if (skb->protocol == htons(ETH_P_IPV6) && + skb_network_header_len(skb) >= sizeof(*ipv6h)) { + ipv6h = ipv6_hdr(skb); + s = &ipv6h->saddr.s6_addr32[0]; + d = &ipv6h->daddr.s6_addr32[0]; + v6hash = (s[1] ^ d[1]) ^ (s[2] ^ d[2]) ^ (s[3] ^ d[3]); + v6hash ^= (v6hash >> 24) ^ (v6hash >> 16) ^ (v6hash >> 8); + return (v6hash ^ data->h_dest[5] ^ data->h_source[5]) % count; } - return (data->h_dest[5] ^ data->h_source[5]) % count; + return bond_xmit_hash_policy_l2(skb, count); } /* * Hash for the output device based upon layer 3 and layer 4 data. If * the packet is a frag or not TCP or UDP, just use layer 3 data. If it is - * altogether not IP, mimic bond_xmit_hash_policy_l2() + * altogether not IP, fall back on bond_xmit_hash_policy_l2() */ static int bond_xmit_hash_policy_l34(struct sk_buff *skb, int count) { - struct ethhdr *data = (struct ethhdr *)skb->data; - struct iphdr *iph = ip_hdr(skb); - __be16 *layer4hdr = (__be16 *)((u32 *)iph + iph->ihl); - int layer4_xor = 0; - - if (skb->protocol == htons(ETH_P_IP)) { + u32 layer4_xor = 0; + struct iphdr *iph; + struct ipv6hdr *ipv6h; + __be32 *s, *d; + __be16 *layer4hdr; + + if (skb->protocol == htons(ETH_P_IP) && + skb_network_header_len(skb) >= sizeof(*iph)) { + iph = ip_hdr(skb); if (!ip_is_fragment(iph) && (iph->protocol == IPPROTO_TCP || - iph->protocol == IPPROTO_UDP)) { - layer4_xor = ntohs((*layer4hdr ^ *(layer4hdr + 1))); + iph->protocol == IPPROTO_UDP) && + (skb_headlen(skb) - skb_network_offset(skb) >= + iph->ihl * sizeof(u32) + sizeof(*layer4hdr) * 2)) { + layer4hdr = (__be16 *)((u32 *)iph + iph->ihl); + layer4_xor = ntohs(*layer4hdr ^ *(layer4hdr + 1)); } return (layer4_xor ^ ((ntohl(iph->saddr ^ iph->daddr)) & 0xffff)) % count; - + } else if (skb->protocol == htons(ETH_P_IPV6) && + skb_network_header_len(skb) >= sizeof(*ipv6h)) { + ipv6h = ipv6_hdr(skb); + if ((ipv6h->nexthdr == IPPROTO_TCP || + ipv6h->nexthdr == IPPROTO_UDP) && + (skb_headlen(skb) - skb_network_offset(skb) >= + sizeof(*ipv6h) + sizeof(*layer4hdr) * 2)) { + layer4hdr = (__be16 *)(ipv6h + 1); + layer4_xor = ntohs(*layer4hdr ^ *(layer4hdr + 1)); + } + s = &ipv6h->saddr.s6_addr32[0]; + d = &ipv6h->daddr.s6_addr32[0]; + layer4_xor ^= (s[1] ^ d[1]) ^ (s[2] ^ d[2]) ^ (s[3] ^ d[3]); + layer4_xor ^= (layer4_xor >> 24) ^ (layer4_xor >> 16) ^ + (layer4_xor >> 8); + return layer4_xor % count; } - return (data->h_dest[5] ^ data->h_source[5]) % count; -} - -/* - * Hash for the output device based upon layer 2 data - */ -static int bond_xmit_hash_policy_l2(struct sk_buff *skb, int count) -{ - struct ethhdr *data = (struct ethhdr *)skb->data; - - return (data->h_dest[5] ^ data->h_source[5]) % count; + return bond_xmit_hash_policy_l2(skb, count); } /*-------------------------- Device entry points ----------------------------*/ |