diff options
27 files changed, 610 insertions, 204 deletions
diff --git a/Documentation/devicetree/bindings/pci/fsl,pci.txt b/Documentation/devicetree/bindings/pci/fsl,pci.txt new file mode 100644 index 000000000000..d8ac4a768e7e --- /dev/null +++ b/Documentation/devicetree/bindings/pci/fsl,pci.txt @@ -0,0 +1,27 @@ +* Bus Enumeration by Freescale PCI-X Agent + +Typically any Freescale PCI-X bridge hardware strapped into Agent mode +is prevented from enumerating the bus. The PrPMC form-factor requires +all mezzanines to be PCI-X Agents, but one per system may still +enumerate the bus. + +The property defined below will allow a PCI-X bridge to be used for bus +enumeration despite being strapped into Agent mode. + +Required properties: +- fsl,pci-agent-force-enum : There is no value associated with this + property. The property itself is treated as a boolean. + +Example: + + /* PCI-X bridge known to be PrPMC Monarch */ + pci0: pci@ef008000 { + fsl,pci-agent-force-enum; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci"; + device_type = "pci"; + ... + ... + }; diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 56da47247fcc..98ae8b714d31 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -288,6 +288,10 @@ config PPC_EMULATE_SSTEP bool default y if KPROBES || UPROBES || XMON || HAVE_HW_BREAKPOINT +config ZONE_DMA32 + bool + default y if PPC64 + source "init/Kconfig" source "kernel/Kconfig.freezer" diff --git a/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi b/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi index 97479f0ce630..aecee9690a88 100644 --- a/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi @@ -410,7 +410,7 @@ /include/ "qoriq-gpio-3.dtsi" /include/ "qoriq-usb2-mph-0.dtsi" usb0: usb@210000 { - compatible = "fsl-usb2-mph-v2.4", "fsl-usb2-mph"; + compatible = "fsl-usb2-mph-v2.5", "fsl-usb2-mph"; fsl,iommu-parent = <&pamu1>; fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */ phy_type = "utmi"; @@ -418,7 +418,7 @@ }; /include/ "qoriq-usb2-dr-0.dtsi" usb1: usb@211000 { - compatible = "fsl-usb2-dr-v2.4", "fsl-usb2-dr"; + compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr"; fsl,iommu-parent = <&pamu1>; fsl,liodn-reg = <&guts 0x524>; /* USB1LIODNR */ dr_mode = "host"; diff --git a/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi b/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi index a3d582e0361a..7e2fc7cdce48 100644 --- a/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi @@ -498,13 +498,13 @@ /include/ "qoriq-gpio-3.dtsi" /include/ "qoriq-usb2-mph-0.dtsi" usb0: usb@210000 { - compatible = "fsl-usb2-mph-v2.4", "fsl-usb2-mph"; + compatible = "fsl-usb2-mph-v2.5", "fsl-usb2-mph"; phy_type = "utmi"; port0; }; /include/ "qoriq-usb2-dr-0.dtsi" usb1: usb@211000 { - compatible = "fsl-usb2-dr-v2.4", "fsl-usb2-dr"; + compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr"; dr_mode = "host"; phy_type = "utmi"; }; diff --git a/arch/powerpc/boot/dts/t1040rdb.dts b/arch/powerpc/boot/dts/t1040rdb.dts new file mode 100644 index 000000000000..79a0bed04c1a --- /dev/null +++ b/arch/powerpc/boot/dts/t1040rdb.dts @@ -0,0 +1,48 @@ +/* + * T1040RDB Device Tree Source + * + * Copyright 2014 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "fsl/t104xsi-pre.dtsi" +/include/ "t104xrdb.dtsi" + +/ { + model = "fsl,T1040RDB"; + compatible = "fsl,T1040RDB"; + ifc: localbus@ffe124000 { + cpld@3,0 { + compatible = "fsl,t1040rdb-cpld"; + }; + }; +}; + +/include/ "fsl/t1040si-post.dtsi" diff --git a/arch/powerpc/boot/dts/t1042rdb.dts b/arch/powerpc/boot/dts/t1042rdb.dts new file mode 100644 index 000000000000..738c23790e94 --- /dev/null +++ b/arch/powerpc/boot/dts/t1042rdb.dts @@ -0,0 +1,48 @@ +/* + * T1042RDB Device Tree Source + * + * Copyright 2014 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "fsl/t104xsi-pre.dtsi" +/include/ "t104xrdb.dtsi" + +/ { + model = "fsl,T1042RDB"; + compatible = "fsl,T1042RDB"; + ifc: localbus@ffe124000 { + cpld@3,0 { + compatible = "fsl,t1042rdb-cpld"; + }; + }; +}; + +/include/ "fsl/t1042si-post.dtsi" diff --git a/arch/powerpc/boot/dts/t1042rdb_pi.dts b/arch/powerpc/boot/dts/t1042rdb_pi.dts new file mode 100644 index 000000000000..634f751fa6d3 --- /dev/null +++ b/arch/powerpc/boot/dts/t1042rdb_pi.dts @@ -0,0 +1,57 @@ +/* + * T1042RDB_PI Device Tree Source + * + * Copyright 2014 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "fsl/t104xsi-pre.dtsi" +/include/ "t104xrdb.dtsi" + +/ { + model = "fsl,T1042RDB_PI"; + compatible = "fsl,T1042RDB_PI"; + ifc: localbus@ffe124000 { + cpld@3,0 { + compatible = "fsl,t1042rdb_pi-cpld"; + }; + }; + soc: soc@ffe000000 { + i2c@118000 { + rtc@68 { + compatible = "dallas,ds1337"; + reg = <0x68>; + interrupts = <0x2 0x1 0 0>; + }; + }; + }; +}; + +/include/ "fsl/t1042si-post.dtsi" diff --git a/arch/powerpc/boot/dts/t104xrdb.dtsi b/arch/powerpc/boot/dts/t104xrdb.dtsi new file mode 100644 index 000000000000..1cf0f3c5f7e5 --- /dev/null +++ b/arch/powerpc/boot/dts/t104xrdb.dtsi @@ -0,0 +1,156 @@ +/* + * T1040RDB/T1042RDB Device Tree Source + * + * Copyright 2014 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/ { + + ifc: localbus@ffe124000 { + reg = <0xf 0xfe124000 0 0x2000>; + ranges = <0 0 0xf 0xe8000000 0x08000000 + 2 0 0xf 0xff800000 0x00010000 + 3 0 0xf 0xffdf0000 0x00008000>; + + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x8000000>; + bank-width = <2>; + device-width = <1>; + }; + + nand@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,ifc-nand"; + reg = <0x2 0x0 0x10000>; + }; + + cpld@3,0 { + reg = <3 0 0x300>; + }; + }; + + memory { + device_type = "memory"; + }; + + dcsr: dcsr@f00000000 { + ranges = <0x00000000 0xf 0x00000000 0x01072000>; + }; + + soc: soc@ffe000000 { + ranges = <0x00000000 0xf 0xfe000000 0x1000000>; + reg = <0xf 0xfe000000 0 0x00001000>; + + spi@110000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "micron,n25q512a"; + reg = <0>; + spi-max-frequency = <10000000>; /* input clock */ + }; + }; + + i2c@118100 { + pca9546@77 { + compatible = "nxp,pca9546"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + }; + + pci0: pcie@ffe240000 { + reg = <0xf 0xfe240000 0 0x10000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x10000000 + 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x10000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci1: pcie@ffe250000 { + reg = <0xf 0xfe250000 0 0x10000>; + ranges = <0x02000000 0x0 0xe0000000 0xc 0x10000000 0x0 0x10000000 + 0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x10000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci2: pcie@ffe260000 { + reg = <0xf 0xfe260000 0 0x10000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x10000000 + 0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x10000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci3: pcie@ffe270000 { + reg = <0xf 0xfe270000 0 0x10000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x30000000 0 0x10000000 + 0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x10000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; +}; diff --git a/arch/powerpc/configs/corenet32_smp_defconfig b/arch/powerpc/configs/corenet32_smp_defconfig index 6a3c58adf253..688e9e4d29a1 100644 --- a/arch/powerpc/configs/corenet32_smp_defconfig +++ b/arch/powerpc/configs/corenet32_smp_defconfig @@ -165,6 +165,8 @@ CONFIG_NFS_FS=y CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y CONFIG_NFSD=m +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_CODEPAGE_850=y CONFIG_NLS_ISO8859_1=y CONFIG_NLS_UTF8=m CONFIG_MAGIC_SYSRQ=y diff --git a/arch/powerpc/configs/corenet64_smp_defconfig b/arch/powerpc/configs/corenet64_smp_defconfig index 269d6e47c67d..6db97e4414b2 100644 --- a/arch/powerpc/configs/corenet64_smp_defconfig +++ b/arch/powerpc/configs/corenet64_smp_defconfig @@ -50,7 +50,6 @@ CONFIG_NET_IPIP=y CONFIG_IP_MROUTE=y CONFIG_IP_PIMSM_V1=y CONFIG_IP_PIMSM_V2=y -CONFIG_ARPD=y CONFIG_INET_ESP=y # CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_LRO is not set @@ -60,33 +59,17 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y CONFIG_MTD=y -CONFIG_MTD_OF_PARTS=y CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLKDEVS=y CONFIG_MTD_BLOCK=y CONFIG_FTL=y CONFIG_MTD_CFI=y -CONFIG_MTD_GEN_PROBE=y -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y CONFIG_MTD_CFI_INTELEXT=y CONFIG_MTD_CFI_AMDSTD=y CONFIG_MTD_PHYSMAP_OF=y -CONFIG_MTD_M25P80=y -CONFIG_MTD_CFI_UTIL=y -CONFIG_MTD_NAND_ECC=y CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_IDS=y CONFIG_MTD_NAND_FSL_ELBC=y CONFIG_MTD_NAND_FSL_IFC=y CONFIG_MTD_UBI=y -CONFIG_MTD_UBI_WL_THRESHOLD=4096 -CONFIG_MTD_UBI_BEB_RESERVE=1 -CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=131072 @@ -102,6 +85,7 @@ CONFIG_INPUT_FF_MEMLESS=m # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set CONFIG_SERIO_LIBPS2=y +CONFIG_PPC_EPAPR_HV_BYTECHAN=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_MANY_PORTS=y @@ -115,7 +99,6 @@ CONFIG_SPI_GPIO=y CONFIG_SPI_FSL_SPI=y CONFIG_SPI_FSL_ESPI=y # CONFIG_HWMON is not set -CONFIG_VIDEO_OUTPUT_CONTROL=y CONFIG_USB_HID=m CONFIG_USB=y CONFIG_USB_MON=y @@ -124,14 +107,17 @@ CONFIG_USB_EHCI_FSL=y CONFIG_USB_STORAGE=y CONFIG_MMC=y CONFIG_MMC_SDHCI=y +CONFIG_EDAC=y +CONFIG_EDAC_MM_EDAC=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_DS1307=y CONFIG_RTC_DRV_DS1374=y CONFIG_RTC_DRV_DS3232=y -CONFIG_EDAC=y -CONFIG_EDAC_MM_EDAC=y CONFIG_DMADEVICES=y CONFIG_FSL_DMA=y +CONFIG_VIRT_DRIVERS=y +CONFIG_FSL_HV_MANAGER=y +CONFIG_FSL_CORENET_CF=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y CONFIG_ISO9660_FS=m @@ -144,35 +130,24 @@ CONFIG_NTFS_FS=y CONFIG_PROC_KCORE=y CONFIG_TMPFS=y CONFIG_HUGETLBFS=y -CONFIG_MISC_FILESYSTEMS=y CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=1 -CONFIG_JFFS2_FS_WRITEBUFFER=y -CONFIG_JFFS2_ZLIB=y -CONFIG_JFFS2_RTIME=y CONFIG_UBIFS_FS=y -CONFIG_UBIFS_FS_XATTR=y -CONFIG_UBIFS_FS_LZO=y -CONFIG_UBIFS_FS_ZLIB=y CONFIG_NFS_FS=y CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y CONFIG_NFSD=m +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_CODEPAGE_850=y CONFIG_NLS_ISO8859_1=y CONFIG_NLS_UTF8=m CONFIG_CRC_T10DIF=y -CONFIG_CRC16=y -CONFIG_ZLIB_DEFLATE=y -CONFIG_LZO_COMPRESS=y -CONFIG_LZO_DECOMPRESS=y -CONFIG_CRYPTO_DEFLATE=y -CONFIG_CRYPTO_LZO=y +CONFIG_DEBUG_INFO=y CONFIG_FRAME_WARN=1024 -CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_FS=y +CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_SHIRQ=y CONFIG_DETECT_HUNG_TASK=y -CONFIG_DEBUG_INFO=y CONFIG_CRYPTO_NULL=y CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_MD4=y @@ -180,4 +155,3 @@ CONFIG_CRYPTO_SHA256=y CONFIG_CRYPTO_SHA512=y # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_DEV_FSL_CAAM=y -CONFIG_FSL_CORENET_CF=y diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig index fa1bfd37f1ec..d2c415489f72 100644 --- a/arch/powerpc/configs/mpc85xx_defconfig +++ b/arch/powerpc/configs/mpc85xx_defconfig @@ -213,7 +213,6 @@ CONFIG_RTC_DRV_DS1307=y CONFIG_RTC_DRV_DS1374=y CONFIG_RTC_DRV_DS3232=y CONFIG_RTC_DRV_CMOS=y -CONFIG_RTC_DRV_DS1307=y CONFIG_DMADEVICES=y CONFIG_FSL_DMA=y # CONFIG_NET_DMA is not set @@ -227,6 +226,9 @@ CONFIG_UDF_FS=m CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=y CONFIG_NTFS_FS=y +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_CODEPAGE_850=y +CONFIG_NLS_ISO8859_1=y CONFIG_PROC_KCORE=y CONFIG_TMPFS=y CONFIG_HUGETLBFS=y diff --git a/arch/powerpc/configs/mpc85xx_smp_defconfig b/arch/powerpc/configs/mpc85xx_smp_defconfig index 0b452ebd8b3d..87460083dbc7 100644 --- a/arch/powerpc/configs/mpc85xx_smp_defconfig +++ b/arch/powerpc/configs/mpc85xx_smp_defconfig @@ -214,7 +214,6 @@ CONFIG_RTC_DRV_DS1307=y CONFIG_RTC_DRV_DS1374=y CONFIG_RTC_DRV_DS3232=y CONFIG_RTC_DRV_CMOS=y -CONFIG_RTC_DRV_DS1307=y CONFIG_DMADEVICES=y CONFIG_FSL_DMA=y # CONFIG_NET_DMA is not set @@ -228,6 +227,9 @@ CONFIG_UDF_FS=m CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=y CONFIG_NTFS_FS=y +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_CODEPAGE_850=y +CONFIG_NLS_ISO8859_1=y CONFIG_PROC_KCORE=y CONFIG_TMPFS=y CONFIG_HUGETLBFS=y diff --git a/arch/powerpc/configs/mpc86xx_defconfig b/arch/powerpc/configs/mpc86xx_defconfig index 35595ea74ff4..fc58aa8a89e4 100644 --- a/arch/powerpc/configs/mpc86xx_defconfig +++ b/arch/powerpc/configs/mpc86xx_defconfig @@ -145,6 +145,9 @@ CONFIG_UDF_FS=m CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=y CONFIG_NTFS_FS=y +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_CODEPAGE_850=y +CONFIG_NLS_ISO8859_1=y CONFIG_PROC_KCORE=y CONFIG_TMPFS=y CONFIG_ADFS_FS=m diff --git a/arch/powerpc/include/asm/pgtable.h b/arch/powerpc/include/asm/pgtable.h index d98c1ecc3266..6d74167bb6bf 100644 --- a/arch/powerpc/include/asm/pgtable.h +++ b/arch/powerpc/include/asm/pgtable.h @@ -4,6 +4,7 @@ #ifndef __ASSEMBLY__ #include <linux/mmdebug.h> +#include <linux/mmzone.h> #include <asm/processor.h> /* For TASK_SIZE */ #include <asm/mmu.h> #include <asm/page.h> @@ -281,6 +282,8 @@ extern unsigned long empty_zero_page[]; extern pgd_t swapper_pg_dir[]; +void limit_zone_pfn(enum zone_type zone, unsigned long max_pfn); +int dma_pfn_limit_to_zone(u64 pfn_limit); extern void paging_init(void); /* diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h index 0c0505956a29..fe3f9488f321 100644 --- a/arch/powerpc/include/asm/reg.h +++ b/arch/powerpc/include/asm/reg.h @@ -947,7 +947,7 @@ * 32-bit 8xx: * - SPRG0 scratch for exception vectors * - SPRG1 scratch for exception vectors - * - SPRG2 apparently unused but initialized + * - SPRG2 scratch for exception vectors * */ #ifdef CONFIG_PPC64 @@ -1057,6 +1057,7 @@ #ifdef CONFIG_8xx #define SPRN_SPRG_SCRATCH0 SPRN_SPRG0 #define SPRN_SPRG_SCRATCH1 SPRN_SPRG1 +#define SPRN_SPRG_SCRATCH2 SPRN_SPRG2 #endif diff --git a/arch/powerpc/kernel/dma-swiotlb.c b/arch/powerpc/kernel/dma-swiotlb.c index bd1a2aba599f..735979764cd4 100644 --- a/arch/powerpc/kernel/dma-swiotlb.c +++ b/arch/powerpc/kernel/dma-swiotlb.c @@ -106,10 +106,14 @@ int __init swiotlb_setup_bus_notifier(void) return 0; } -void swiotlb_detect_4g(void) +void __init swiotlb_detect_4g(void) { - if ((memblock_end_of_DRAM() - 1) > 0xffffffff) + if ((memblock_end_of_DRAM() - 1) > 0xffffffff) { ppc_swiotlb_enable = 1; +#ifdef CONFIG_ZONE_DMA32 + limit_zone_pfn(ZONE_DMA32, (1ULL << 32) >> PAGE_SHIFT); +#endif + } } static int __init swiotlb_late_init(void) diff --git a/arch/powerpc/kernel/dma.c b/arch/powerpc/kernel/dma.c index 210ff9d3c182..adac9dc54aee 100644 --- a/arch/powerpc/kernel/dma.c +++ b/arch/powerpc/kernel/dma.c @@ -15,6 +15,7 @@ #include <asm/vio.h> #include <asm/bug.h> #include <asm/machdep.h> +#include <asm/swiotlb.h> /* * Generic direct DMA implementation @@ -25,6 +26,18 @@ * default the offset is PCI_DRAM_OFFSET. */ +static u64 __maybe_unused get_pfn_limit(struct device *dev) +{ + u64 pfn = (dev->coherent_dma_mask >> PAGE_SHIFT) + 1; + struct dev_archdata __maybe_unused *sd = &dev->archdata; + +#ifdef CONFIG_SWIOTLB + if (sd->max_direct_dma_addr && sd->dma_ops == &swiotlb_dma_ops) + pfn = min_t(u64, pfn, sd->max_direct_dma_addr >> PAGE_SHIFT); +#endif + + return pfn; +} void *dma_direct_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle, gfp_t flag, @@ -40,6 +53,26 @@ void *dma_direct_alloc_coherent(struct device *dev, size_t size, #else struct page *page; int node = dev_to_node(dev); + u64 pfn = get_pfn_limit(dev); + int zone; + + zone = dma_pfn_limit_to_zone(pfn); + if (zone < 0) { + dev_err(dev, "%s: No suitable zone for pfn %#llx\n", + __func__, pfn); + return NULL; + } + + switch (zone) { + case ZONE_DMA: + flag |= GFP_DMA; + break; +#ifdef CONFIG_ZONE_DMA32 + case ZONE_DMA32: + flag |= GFP_DMA32; + break; +#endif + }; /* ignore region specifiers */ flag &= ~(__GFP_HIGHMEM); diff --git a/arch/powerpc/kernel/head_8xx.S b/arch/powerpc/kernel/head_8xx.S index 7ee876d2adb5..fafff8dbd5d9 100644 --- a/arch/powerpc/kernel/head_8xx.S +++ b/arch/powerpc/kernel/head_8xx.S @@ -104,12 +104,15 @@ turn_on_mmu: * task's thread_struct. */ #define EXCEPTION_PROLOG \ - mtspr SPRN_SPRG_SCRATCH0,r10; \ - mtspr SPRN_SPRG_SCRATCH1,r11; \ - mfcr r10; \ + EXCEPTION_PROLOG_0; \ EXCEPTION_PROLOG_1; \ EXCEPTION_PROLOG_2 +#define EXCEPTION_PROLOG_0 \ + mtspr SPRN_SPRG_SCRATCH0,r10; \ + mtspr SPRN_SPRG_SCRATCH1,r11; \ + mfcr r10 + #define EXCEPTION_PROLOG_1 \ mfspr r11,SPRN_SRR1; /* check whether user or kernel */ \ andi. r11,r11,MSR_PR; \ @@ -145,6 +148,14 @@ turn_on_mmu: SAVE_2GPRS(7, r11) /* + * Exception exit code. + */ +#define EXCEPTION_EPILOG_0 \ + mtcr r10; \ + mfspr r10,SPRN_SPRG_SCRATCH0; \ + mfspr r11,SPRN_SPRG_SCRATCH1 + +/* * Note: code which follows this uses cr0.eq (set if from kernel), * r11, r12 (SRR0), and r9 (SRR1). * @@ -293,16 +304,8 @@ InstructionTLBMiss: #ifdef CONFIG_8xx_CPU6 stw r3, 8(r0) #endif - DO_8xx_CPU6(0x3f80, r3) - mtspr SPRN_M_TW, r10 /* Save a couple of working registers */ - mfcr r10 -#ifdef CONFIG_8xx_CPU6 - stw r10, 0(r0) - stw r11, 4(r0) -#else - mtspr SPRN_DAR, r10 - mtspr SPRN_SPRG2, r11 -#endif + EXCEPTION_PROLOG_0 + mtspr SPRN_SPRG_SCRATCH2, r10 mfspr r10, SPRN_SRR0 /* Get effective address of fault */ #ifdef CONFIG_8xx_CPU15 addi r11, r10, 0x1000 @@ -359,18 +362,11 @@ InstructionTLBMiss: mtspr SPRN_MI_RPN, r10 /* Update TLB entry */ /* Restore registers */ -#ifndef CONFIG_8xx_CPU6 - mfspr r10, SPRN_DAR - mtcr r10 - mtspr SPRN_DAR, r11 /* Tag DAR */ - mfspr r11, SPRN_SPRG2 -#else - lwz r11, 0(r0) - mtcr r11 - lwz r11, 4(r0) +#ifdef CONFIG_8xx_CPU6 lwz r3, 8(r0) #endif - mfspr r10, SPRN_M_TW + mfspr r10, SPRN_SPRG_SCRATCH2 + EXCEPTION_EPILOG_0 rfi 2: mfspr r11, SPRN_SRR1 @@ -381,19 +377,11 @@ InstructionTLBMiss: mtspr SPRN_SRR1, r11 /* Restore registers */ -#ifndef CONFIG_8xx_CPU6 - mfspr r10, SPRN_DAR - mtcr r10 - li r11, 0x00f0 - mtspr SPRN_DAR, r11 /* Tag DAR */ - mfspr r11, SPRN_SPRG2 -#else - lwz r11, 0(r0) - mtcr r11 - lwz r11, 4(r0) +#ifdef CONFIG_8xx_CPU6 lwz r3, 8(r0) #endif - mfspr r10, SPRN_M_TW + mfspr r10, SPRN_SPRG_SCRATCH2 + EXCEPTION_EPILOG_0 b InstructionAccess . = 0x1200 @@ -401,16 +389,8 @@ DataStoreTLBMiss: #ifdef CONFIG_8xx_CPU6 stw r3, 8(r0) #endif - DO_8xx_CPU6(0x3f80, r3) - mtspr SPRN_M_TW, r10 /* Save a couple of working registers */ - mfcr r10 -#ifdef CONFIG_8xx_CPU6 - stw r10, 0(r0) - stw r11, 4(r0) -#else - mtspr SPRN_DAR, r10 - mtspr SPRN_SPRG2, r11 -#endif + EXCEPTION_PROLOG_0 + mtspr SPRN_SPRG_SCRATCH2, r10 mfspr r10, SPRN_M_TWB /* Get level 1 table entry address */ /* If we are faulting a kernel address, we have to use the @@ -483,19 +463,12 @@ DataStoreTLBMiss: mtspr SPRN_MD_RPN, r10 /* Update TLB entry */ /* Restore registers */ -#ifndef CONFIG_8xx_CPU6 - mfspr r10, SPRN_DAR - mtcr r10 - mtspr SPRN_DAR, r11 /* Tag DAR */ - mfspr r11, SPRN_SPRG2 -#else - mtspr SPRN_DAR, r11 /* Tag DAR */ - lwz r11, 0(r0) - mtcr r11 - lwz r11, 4(r0) +#ifdef CONFIG_8xx_CPU6 lwz r3, 8(r0) #endif - mfspr r10, SPRN_M_TW + mtspr SPRN_DAR, r11 /* Tag DAR */ + mfspr r10, SPRN_SPRG_SCRATCH2 + EXCEPTION_EPILOG_0 rfi /* This is an instruction TLB error on the MPC8xx. This could be due @@ -507,35 +480,18 @@ InstructionTLBError: b InstructionAccess /* This is the data TLB error on the MPC8xx. This could be due to - * many reasons, including a dirty update to a pte. We can catch that - * one here, but anything else is an error. First, we track down the - * Linux pte. If it is valid, write access is allowed, but the - * page dirty bit is not set, we will set it and reload the TLB. For - * any other case, we bail out to a higher level function that can - * handle it. + * many reasons, including a dirty update to a pte. We bail out to + * a higher level function that can handle it. */ . = 0x1400 DataTLBError: -#ifdef CONFIG_8xx_CPU6 - stw r3, 8(r0) -#endif - DO_8xx_CPU6(0x3f80, r3) - mtspr SPRN_M_TW, r10 /* Save a couple of working registers */ - mfcr r10 - stw r10, 0(r0) - stw r11, 4(r0) + EXCEPTION_PROLOG_0 - mfspr r10, SPRN_DAR - cmpwi cr0, r10, 0x00f0 + mfspr r11, SPRN_DAR + cmpwi cr0, r11, 0x00f0 beq- FixupDAR /* must be a buggy dcbX, icbi insn. */ -DARFixed:/* Return from dcbx instruction bug workaround, r10 holds value of DAR */ - mfspr r10, SPRN_M_TW /* Restore registers */ - lwz r11, 0(r0) - mtcr r11 - lwz r11, 4(r0) -#ifdef CONFIG_8xx_CPU6 - lwz r3, 8(r0) -#endif +DARFixed:/* Return from dcbx instruction bug workaround */ + EXCEPTION_EPILOG_0 b DataAccess EXCEPTION(0x1500, Trap_15, unknown_exception, EXC_XFER_EE) @@ -559,11 +515,15 @@ DARFixed:/* Return from dcbx instruction bug workaround, r10 holds value of DAR /* This is the procedure to calculate the data EA for buggy dcbx,dcbi instructions * by decoding the registers used by the dcbx instruction and adding them. - * DAR is set to the calculated address and r10 also holds the EA on exit. + * DAR is set to the calculated address. */ /* define if you don't want to use self modifying code */ #define NO_SELF_MODIFYING_CODE FixupDAR:/* Entry point for dcbx workaround. */ +#ifdef CONFIG_8xx_CPU6 + stw r3, 8(r0) +#endif + mtspr SPRN_SPRG_SCRATCH2, r10 /* fetch instruction from memory. */ mfspr r10, SPRN_SRR0 andis. r11, r10, 0x8000 /* Address >= 0x80000000 */ @@ -579,16 +539,17 @@ FixupDAR:/* Entry point for dcbx workaround. */ mtspr SPRN_MD_TWC, r11 /* Load pte table base address */ mfspr r11, SPRN_MD_TWC /* ....and get the pte address */ lwz r11, 0(r11) /* Get the pte */ +#ifdef CONFIG_8xx_CPU6 + lwz r3, 8(r0) /* restore r3 from memory */ +#endif /* concat physical page address(r11) and page offset(r10) */ rlwimi r11, r10, 0, 20, 31 lwz r11,0(r11) /* Check if it really is a dcbx instruction. */ /* dcbt and dcbtst does not generate DTLB Misses/Errors, * no need to include them here */ - srwi r10, r11, 26 /* check if major OP code is 31 */ - cmpwi cr0, r10, 31 - bne- 141f - rlwinm r10, r11, 0, 21, 30 + xoris r10, r11, 0x7c00 /* check if major OP code is 31 */ + rlwinm r10, r10, 0, 21, 5 cmpwi cr0, r10, 2028 /* Is dcbz? */ beq+ 142f cmpwi cr0, r10, 940 /* Is dcbi? */ @@ -599,16 +560,13 @@ FixupDAR:/* Entry point for dcbx workaround. */ beq+ 142f cmpwi cr0, r10, 1964 /* Is icbi? */ beq+ 142f -141: mfspr r10, SPRN_DAR /* r10 must hold DAR at exit */ +141: mfspr r10,SPRN_SPRG_SCRATCH2 b DARFixed /* Nope, go back to normal TLB processing */ 144: mfspr r10, SPRN_DSISR rlwinm r10, r10,0,7,5 /* Clear store bit for buggy dcbst insn */ mtspr SPRN_DSISR, r10 142: /* continue, it was a dcbx, dcbi instruction. */ -#ifdef CONFIG_8xx_CPU6 - lwz r3, 8(r0) /* restore r3 from memory */ -#endif #ifndef NO_SELF_MODIFYING_CODE andis. r10,r11,0x1f /* test if reg RA is r0 */ li r10,modified_instr@l @@ -619,14 +577,15 @@ FixupDAR:/* Entry point for dcbx workaround. */ stw r11,0(r10) /* store add/and instruction */ dcbf 0,r10 /* flush new instr. to memory. */ icbi 0,r10 /* invalidate instr. cache line */ - lwz r11, 4(r0) /* restore r11 from memory */ - mfspr r10, SPRN_M_TW /* restore r10 from M_TW */ + mfspr r11, SPRN_SPRG_SCRATCH1 /* restore r11 */ + mfspr r10, SPRN_SPRG_SCRATCH0 /* restore r10 */ isync /* Wait until new instr is loaded from memory */ modified_instr: .space 4 /* this is where the add instr. is stored */ bne+ 143f subf r10,r0,r10 /* r10=r10-r0, only if reg RA is r0 */ 143: mtdar r10 /* store faulting EA in DAR */ + mfspr r10,SPRN_SPRG_SCRATCH2 b DARFixed /* Go back to normal TLB handling */ #else mfctr r10 @@ -680,13 +639,16 @@ modified_instr: mfdar r11 mtctr r11 /* restore ctr reg from DAR */ mtdar r10 /* save fault EA to DAR */ + mfspr r10,SPRN_SPRG_SCRATCH2 b DARFixed /* Go back to normal TLB handling */ /* special handling for r10,r11 since these are modified already */ -153: lwz r11, 4(r0) /* load r11 from memory */ - b 155f -154: mfspr r11, SPRN_M_TW /* load r10 from M_TW */ -155: add r10, r10, r11 /* add it */ +153: mfspr r11, SPRN_SPRG_SCRATCH1 /* load r11 from SPRN_SPRG_SCRATCH1 */ + add r10, r10, r11 /* add it */ + mfctr r11 /* restore r11 */ + b 151b +154: mfspr r11, SPRN_SPRG_SCRATCH0 /* load r10 from SPRN_SPRG_SCRATCH0 */ + add r10, r10, r11 /* add it */ mfctr r11 /* restore r11 */ b 151b #endif diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c index e0f7a189c48e..8ebaac75c940 100644 --- a/arch/powerpc/mm/mem.c +++ b/arch/powerpc/mm/mem.c @@ -260,6 +260,60 @@ static int __init mark_nonram_nosave(void) } return 0; } +#else /* CONFIG_NEED_MULTIPLE_NODES */ +static int __init mark_nonram_nosave(void) +{ + return 0; +} +#endif + +static bool zone_limits_final; + +static unsigned long max_zone_pfns[MAX_NR_ZONES] = { + [0 ... MAX_NR_ZONES - 1] = ~0UL +}; + +/* + * Restrict the specified zone and all more restrictive zones + * to be below the specified pfn. May not be called after + * paging_init(). + */ +void __init limit_zone_pfn(enum zone_type zone, unsigned long pfn_limit) +{ + int i; + + if (WARN_ON(zone_limits_final)) + return; + + for (i = zone; i >= 0; i--) { + if (max_zone_pfns[i] > pfn_limit) + max_zone_pfns[i] = pfn_limit; + } +} + +/* + * Find the least restrictive zone that is entirely below the + * specified pfn limit. Returns < 0 if no suitable zone is found. + * + * pfn_limit must be u64 because it can exceed 32 bits even on 32-bit + * systems -- the DMA limit can be higher than any possible real pfn. + */ +int dma_pfn_limit_to_zone(u64 pfn_limit) +{ + enum zone_type top_zone = ZONE_NORMAL; + int i; + +#ifdef CONFIG_HIGHMEM + top_zone = ZONE_HIGHMEM; +#endif + + for (i = top_zone; i >= 0; i--) { + if (max_zone_pfns[i] <= pfn_limit) + return i; + } + + return -EPERM; +} /* * paging_init() sets up the page tables - in fact we've already done this. @@ -268,7 +322,7 @@ void __init paging_init(void) { unsigned long long total_ram = memblock_phys_mem_size(); phys_addr_t top_of_ram = memblock_end_of_DRAM(); - unsigned long max_zone_pfns[MAX_NR_ZONES]; + enum zone_type top_zone; #ifdef CONFIG_PPC32 unsigned long v = __fix_to_virt(__end_of_fixed_addresses - 1); @@ -290,18 +344,20 @@ void __init paging_init(void) (unsigned long long)top_of_ram, total_ram); printk(KERN_DEBUG "Memory hole size: %ldMB\n", (long int)((top_of_ram - total_ram) >> 20)); - memset(max_zone_pfns, 0, sizeof(max_zone_pfns)); + #ifdef CONFIG_HIGHMEM - max_zone_pfns[ZONE_DMA] = lowmem_end_addr >> PAGE_SHIFT; - max_zone_pfns[ZONE_HIGHMEM] = top_of_ram >> PAGE_SHIFT; + top_zone = ZONE_HIGHMEM; + limit_zone_pfn(ZONE_NORMAL, lowmem_end_addr >> PAGE_SHIFT); #else - max_zone_pfns[ZONE_DMA] = top_of_ram >> PAGE_SHIFT; + top_zone = ZONE_NORMAL; #endif + + limit_zone_pfn(top_zone, top_of_ram >> PAGE_SHIFT); + zone_limits_final = true; free_area_init_nodes(max_zone_pfns); mark_nonram_nosave(); } -#endif /* ! CONFIG_NEED_MULTIPLE_NODES */ static void __init register_page_bootmem_info(void) { diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c index ec32d463cad9..649666d5d1c2 100644 --- a/arch/powerpc/mm/numa.c +++ b/arch/powerpc/mm/numa.c @@ -1134,14 +1134,6 @@ void __init do_init_bootmem(void) } } -void __init paging_init(void) -{ - unsigned long max_zone_pfns[MAX_NR_ZONES]; - memset(max_zone_pfns, 0, sizeof(max_zone_pfns)); - max_zone_pfns[ZONE_DMA] = memblock_end_of_DRAM() >> PAGE_SHIFT; - free_area_init_nodes(max_zone_pfns); -} - static int __init early_numa(char *p) { if (!p) diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig index 0c1e6903597e..f22635a71d01 100644 --- a/arch/powerpc/platforms/85xx/Kconfig +++ b/arch/powerpc/platforms/85xx/Kconfig @@ -276,7 +276,7 @@ config CORENET_GENERIC For 64bit kernel, the following boards are supported: T208x QDS/RDB, T4240 QDS/RDB and B4 QDS The following boards are supported for both 32bit and 64bit kernel: - P5020 DS, P5040 DS and T104xQDS + P5020 DS, P5040 DS and T104xQDS/RDB endif # FSL_SOC_BOOKE diff --git a/arch/powerpc/platforms/85xx/corenet_generic.c b/arch/powerpc/platforms/85xx/corenet_generic.c index d22dd85e50bf..e56b89a792ed 100644 --- a/arch/powerpc/platforms/85xx/corenet_generic.c +++ b/arch/powerpc/platforms/85xx/corenet_generic.c @@ -20,6 +20,7 @@ #include <asm/time.h> #include <asm/machdep.h> #include <asm/pci-bridge.h> +#include <asm/pgtable.h> #include <asm/ppc-pci.h> #include <mm/mmu_decl.h> #include <asm/prom.h> @@ -67,6 +68,16 @@ void __init corenet_gen_setup_arch(void) swiotlb_detect_4g(); +#if defined(CONFIG_FSL_PCI) && defined(CONFIG_ZONE_DMA32) + /* + * Inbound windows don't cover the full lower 4 GiB + * due to conflicts with PCICSRBAR and outbound windows, + * so limit the DMA32 zone to 2 GiB, to allow consistent + * allocations to succeed. + */ + limit_zone_pfn(ZONE_DMA32, 1UL << (31 - PAGE_SHIFT)); +#endif + pr_info("%s board\n", ppc_md.name); mpc85xx_qe_init(); @@ -129,6 +140,9 @@ static const char * const boards[] __initconst = { "fsl,B4220QDS", "fsl,T1040QDS", "fsl,T1042QDS", + "fsl,T1040RDB", + "fsl,T1042RDB", + "fsl,T1042RDB_PI", "keymile,kmcoge4", NULL }; diff --git a/arch/powerpc/platforms/85xx/qemu_e500.c b/arch/powerpc/platforms/85xx/qemu_e500.c index 7f2673293549..8ad2fe6f200a 100644 --- a/arch/powerpc/platforms/85xx/qemu_e500.c +++ b/arch/powerpc/platforms/85xx/qemu_e500.c @@ -18,6 +18,7 @@ #include <linux/kernel.h> #include <linux/of_fdt.h> #include <asm/machdep.h> +#include <asm/pgtable.h> #include <asm/time.h> #include <asm/udbg.h> #include <asm/mpic.h> @@ -44,6 +45,15 @@ static void __init qemu_e500_setup_arch(void) fsl_pci_assign_primary(); swiotlb_detect_4g(); +#if defined(CONFIG_FSL_PCI) && defined(CONFIG_ZONE_DMA32) + /* + * Inbound windows don't cover the full lower 4 GiB + * due to conflicts with PCICSRBAR and outbound windows, + * so limit the DMA32 zone to 2 GiB, to allow consistent + * allocations to succeed. + */ + limit_zone_pfn(ZONE_DMA32, 1UL << (31 - PAGE_SHIFT)); +#endif mpc85xx_smp_init(); } diff --git a/arch/powerpc/sysdev/fsl_msi.c b/arch/powerpc/sysdev/fsl_msi.c index 77efbaec7b9c..e2ee226464f8 100644 --- a/arch/powerpc/sysdev/fsl_msi.c +++ b/arch/powerpc/sysdev/fsl_msi.c @@ -18,6 +18,8 @@ #include <linux/pci.h> #include <linux/slab.h> #include <linux/of_platform.h> +#include <linux/interrupt.h> +#include <linux/seq_file.h> #include <sysdev/fsl_soc.h> #include <asm/prom.h> #include <asm/hw_irq.h> @@ -50,6 +52,7 @@ struct fsl_msi_feature { struct fsl_msi_cascade_data { struct fsl_msi *msi_data; int index; + int virq; }; static inline u32 fsl_msi_read(u32 __iomem *base, unsigned int reg) @@ -65,11 +68,24 @@ static void fsl_msi_end_irq(struct irq_data *d) { } +static void fsl_msi_print_chip(struct irq_data *irqd, struct seq_file *p) +{ + struct fsl_msi *msi_data = irqd->domain->host_data; + irq_hw_number_t hwirq = irqd_to_hwirq(irqd); + int cascade_virq, srs; + + srs = (hwirq >> msi_data->srs_shift) & MSI_SRS_MASK; + cascade_virq = msi_data->cascade_array[srs]->virq; + + seq_printf(p, " fsl-msi-%d", cascade_virq); +} + + static struct irq_chip fsl_msi_chip = { .irq_mask = mask_msi_irq, .irq_unmask = unmask_msi_irq, .irq_ack = fsl_msi_end_irq, - .name = "FSL-MSI", + .irq_print_chip = fsl_msi_print_chip, }; static int fsl_msi_host_map(struct irq_domain *h, unsigned int virq, @@ -180,7 +196,8 @@ static int fsl_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type) np = of_parse_phandle(hose->dn, "fsl,msi", 0); if (np) { if (of_device_is_compatible(np, "fsl,mpic-msi") || - of_device_is_compatible(np, "fsl,vmpic-msi")) + of_device_is_compatible(np, "fsl,vmpic-msi") || + of_device_is_compatible(np, "fsl,vmpic-msi-v4.3")) phandle = np->phandle; else { dev_err(&pdev->dev, @@ -239,40 +256,24 @@ out_free: return rc; } -static void fsl_msi_cascade(unsigned int irq, struct irq_desc *desc) +static irqreturn_t fsl_msi_cascade(int irq, void *data) { - struct irq_chip *chip = irq_desc_get_chip(desc); - struct irq_data *idata = irq_desc_get_irq_data(desc); unsigned int cascade_irq; struct fsl_msi *msi_data; int msir_index = -1; u32 msir_value = 0; u32 intr_index; u32 have_shift = 0; - struct fsl_msi_cascade_data *cascade_data; + struct fsl_msi_cascade_data *cascade_data = data; + irqreturn_t ret = IRQ_NONE; - cascade_data = irq_get_handler_data(irq); msi_data = cascade_data->msi_data; - raw_spin_lock(&desc->lock); - if ((msi_data->feature & FSL_PIC_IP_MASK) == FSL_PIC_IP_IPIC) { - if (chip->irq_mask_ack) - chip->irq_mask_ack(idata); - else { - chip->irq_mask(idata); - chip->irq_ack(idata); - } - } - - if (unlikely(irqd_irq_inprogress(idata))) - goto unlock; - msir_index = cascade_data->index; if (msir_index >= NR_MSI_REG_MAX) cascade_irq = NO_IRQ; - irqd_set_chained_irq_inprogress(idata); switch (msi_data->feature & FSL_PIC_IP_MASK) { case FSL_PIC_IP_MPIC: msir_value = fsl_msi_read(msi_data->msi_regs, @@ -301,40 +302,32 @@ static void fsl_msi_cascade(unsigned int irq, struct irq_desc *desc) cascade_irq = irq_linear_revmap(msi_data->irqhost, msi_hwirq(msi_data, msir_index, intr_index + have_shift)); - if (cascade_irq != NO_IRQ) + if (cascade_irq != NO_IRQ) { generic_handle_irq(cascade_irq); + ret = IRQ_HANDLED; + } have_shift += intr_index + 1; msir_value = msir_value >> (intr_index + 1); } - irqd_clr_chained_irq_inprogress(idata); - switch (msi_data->feature & FSL_PIC_IP_MASK) { - case FSL_PIC_IP_MPIC: - case FSL_PIC_IP_VMPIC: - chip->irq_eoi(idata); - break; - case FSL_PIC_IP_IPIC: - if (!irqd_irq_disabled(idata) && chip->irq_unmask) - chip->irq_unmask(idata); - break; - } -unlock: - raw_spin_unlock(&desc->lock); + return ret; } static int fsl_of_msi_remove(struct platform_device *ofdev) { struct fsl_msi *msi = platform_get_drvdata(ofdev); int virq, i; - struct fsl_msi_cascade_data *cascade_data; if (msi->list.prev != NULL) list_del(&msi->list); for (i = 0; i < NR_MSI_REG_MAX; i++) { - virq = msi->msi_virqs[i]; - if (virq != NO_IRQ) { - cascade_data = irq_get_handler_data(virq); - kfree(cascade_data); + if (msi->cascade_array[i]) { + virq = msi->cascade_array[i]->virq; + + BUG_ON(virq == NO_IRQ); + + free_irq(virq, msi->cascade_array[i]); + kfree(msi->cascade_array[i]); irq_dispose_mapping(virq); } } @@ -353,7 +346,7 @@ static int fsl_msi_setup_hwirq(struct fsl_msi *msi, struct platform_device *dev, int offset, int irq_index) { struct fsl_msi_cascade_data *cascade_data = NULL; - int virt_msir, i; + int virt_msir, i, ret; virt_msir = irq_of_parse_and_map(dev->dev.of_node, irq_index); if (virt_msir == NO_IRQ) { @@ -368,11 +361,18 @@ static int fsl_msi_setup_hwirq(struct fsl_msi *msi, struct platform_device *dev, return -ENOMEM; } irq_set_lockdep_class(virt_msir, &fsl_msi_irq_class); - msi->msi_virqs[irq_index] = virt_msir; cascade_data->index = offset; cascade_data->msi_data = msi; - irq_set_handler_data(virt_msir, cascade_data); - irq_set_chained_handler(virt_msir, fsl_msi_cascade); + cascade_data->virq = virt_msir; + msi->cascade_array[irq_index] = cascade_data; + + ret = request_irq(virt_msir, fsl_msi_cascade, 0, + "fsl-msi-cascade", cascade_data); + if (ret) { + dev_err(&dev->dev, "failed to request_irq(%d), ret = %d\n", + virt_msir, ret); + return ret; + } /* Release the hwirqs corresponding to this MSI register */ for (i = 0; i < IRQS_PER_MSI_REG; i++) @@ -466,7 +466,8 @@ static int fsl_of_msi_probe(struct platform_device *dev) p = of_get_property(dev->dev.of_node, "msi-available-ranges", &len); - if (of_device_is_compatible(dev->dev.of_node, "fsl,mpic-msi-v4.3")) { + if (of_device_is_compatible(dev->dev.of_node, "fsl,mpic-msi-v4.3") || + of_device_is_compatible(dev->dev.of_node, "fsl,vmpic-msi-v4.3")) { msi->srs_shift = MSIIR1_SRS_SHIFT; msi->ibs_shift = MSIIR1_IBS_SHIFT; if (p) @@ -572,6 +573,10 @@ static const struct of_device_id fsl_of_msi_ids[] = { .compatible = "fsl,vmpic-msi", .data = &vmpic_msi_feature, }, + { + .compatible = "fsl,vmpic-msi-v4.3", + .data = &vmpic_msi_feature, + }, #endif {} }; diff --git a/arch/powerpc/sysdev/fsl_msi.h b/arch/powerpc/sysdev/fsl_msi.h index df9aa9fe0933..420cfcbdac01 100644 --- a/arch/powerpc/sysdev/fsl_msi.h +++ b/arch/powerpc/sysdev/fsl_msi.h @@ -27,6 +27,8 @@ #define FSL_PIC_IP_IPIC 0x00000002 #define FSL_PIC_IP_VMPIC 0x00000003 +struct fsl_msi_cascade_data; + struct fsl_msi { struct irq_domain *irqhost; @@ -37,7 +39,7 @@ struct fsl_msi { u32 srs_shift; /* Shift of the shared interrupt register select */ void __iomem *msi_regs; u32 feature; - int msi_virqs[NR_MSI_REG_MAX]; + struct fsl_msi_cascade_data *cascade_array[NR_MSI_REG_MAX]; struct msi_bitmap bitmap; diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c index c5077673bd94..65d2ed4549e6 100644 --- a/arch/powerpc/sysdev/fsl_pci.c +++ b/arch/powerpc/sysdev/fsl_pci.c @@ -522,7 +522,8 @@ int fsl_add_bridge(struct platform_device *pdev, int is_primary) } else { /* For PCI read PROG to identify controller mode */ early_read_config_byte(hose, 0, 0, PCI_CLASS_PROG, &progif); - if ((progif & 1) == 1) + if ((progif & 1) && + !of_property_read_bool(dev, "fsl,pci-agent-force-enum")) goto no_bridge; } diff --git a/include/linux/fsl_ifc.h b/include/linux/fsl_ifc.h index f49ddb1b2273..84d60cb841b1 100644 --- a/include/linux/fsl_ifc.h +++ b/include/linux/fsl_ifc.h @@ -781,13 +781,13 @@ struct fsl_ifc_regs { __be32 amask; u32 res4[0x2]; } amask_cs[FSL_IFC_BANK_COUNT]; - u32 res5[0x17]; + u32 res5[0x18]; struct { - __be32 csor_ext; __be32 csor; + __be32 csor_ext; u32 res6; } csor_cs[FSL_IFC_BANK_COUNT]; - u32 res7[0x19]; + u32 res7[0x18]; struct { __be32 ftim[4]; u32 res8[0x8]; |