diff options
| -rw-r--r-- | Documentation/devicetree/bindings/arm/primecell.txt | 19 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/serial/pl011.txt | 17 | ||||
| -rw-r--r-- | drivers/tty/serial/amba-pl011.c | 62 |
3 files changed, 72 insertions, 26 deletions
diff --git a/Documentation/devicetree/bindings/arm/primecell.txt b/Documentation/devicetree/bindings/arm/primecell.txt index 64fc82bc8928..0df6acacfaea 100644 --- a/Documentation/devicetree/bindings/arm/primecell.txt +++ b/Documentation/devicetree/bindings/arm/primecell.txt @@ -16,14 +16,31 @@ Optional properties: - clocks : From common clock binding. First clock is phandle to clock for apb pclk. Additional clocks are optional and specific to those peripherals. - clock-names : From common clock binding. Shall be "apb_pclk" for first clock. +- dmas : From common DMA binding. If present, refers to one or more dma channels. +- dma-names : From common DMA binding, needs to match the 'dmas' property. + Devices with exactly one receive and transmit channel shall name + these "rx" and "tx", respectively. +- pinctrl-<n> : Pinctrl states as described in bindings/pinctrl/pinctrl-bindings.txt +- pinctrl-names : Names corresponding to the numbered pinctrl states +- interrupts : one or more interrupt specifiers +- interrupt-names : names corresponding to the interrupts properties Example: serial@fff36000 { compatible = "arm,pl011", "arm,primecell"; arm,primecell-periphid = <0x00341011>; + clocks = <&pclk>; clock-names = "apb_pclk"; - + + dmas = <&dma-controller 4>, <&dma-controller 5>; + dma-names = "rx", "tx"; + + pinctrl-0 = <&uart0_default_mux>, <&uart0_default_mode>; + pinctrl-1 = <&uart0_sleep_mode>; + pinctrl-names = "default","sleep"; + + interrupts = <0 11 0x4>; }; diff --git a/Documentation/devicetree/bindings/serial/pl011.txt b/Documentation/devicetree/bindings/serial/pl011.txt new file mode 100644 index 000000000000..5d2e840ae65c --- /dev/null +++ b/Documentation/devicetree/bindings/serial/pl011.txt @@ -0,0 +1,17 @@ +* ARM AMBA Primecell PL011 serial UART + +Required properties: +- compatible: must be "arm,primecell", "arm,pl011" +- reg: exactly one register range with length 0x1000 +- interrupts: exactly one interrupt specifier + +Optional properties: +- pinctrl: When present, must have one state named "sleep" + and one state named "default" +- clocks: When present, must refer to exactly one clock named + "apb_pclk" +- dmas: When present, may have one or two dma channels. + The first one must be named "rx", the second one + must be named "tx". + +See also bindings/arm/primecell.txt diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c index 3ea5408fcbeb..c25b00ef9dbb 100644 --- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c @@ -245,7 +245,7 @@ static void pl011_sgbuf_free(struct dma_chan *chan, struct pl011_sgbuf *sg, } } -static void pl011_dma_probe_initcall(struct uart_amba_port *uap) +static void pl011_dma_probe_initcall(struct device *dev, struct uart_amba_port *uap) { /* DMA is the sole user of the platform data right now */ struct amba_pl011_data *plat = uap->port.dev->platform_data; @@ -259,20 +259,25 @@ static void pl011_dma_probe_initcall(struct uart_amba_port *uap) struct dma_chan *chan; dma_cap_mask_t mask; - /* We need platform data */ - if (!plat || !plat->dma_filter) { - dev_info(uap->port.dev, "no DMA platform data\n"); - return; - } + chan = dma_request_slave_channel(dev, "tx"); - /* Try to acquire a generic DMA engine slave TX channel */ - dma_cap_zero(mask); - dma_cap_set(DMA_SLAVE, mask); - - chan = dma_request_channel(mask, plat->dma_filter, plat->dma_tx_param); if (!chan) { - dev_err(uap->port.dev, "no TX DMA channel!\n"); - return; + /* We need platform data */ + if (!plat || !plat->dma_filter) { + dev_info(uap->port.dev, "no DMA platform data\n"); + return; + } + + /* Try to acquire a generic DMA engine slave TX channel */ + dma_cap_zero(mask); + dma_cap_set(DMA_SLAVE, mask); + + chan = dma_request_channel(mask, plat->dma_filter, + plat->dma_tx_param); + if (!chan) { + dev_err(uap->port.dev, "no TX DMA channel!\n"); + return; + } } dmaengine_slave_config(chan, &tx_conf); @@ -282,7 +287,18 @@ static void pl011_dma_probe_initcall(struct uart_amba_port *uap) dma_chan_name(uap->dmatx.chan)); /* Optionally make use of an RX channel as well */ - if (plat->dma_rx_param) { + chan = dma_request_slave_channel(dev, "rx"); + + if (!chan && plat->dma_rx_param) { + chan = dma_request_channel(mask, plat->dma_filter, plat->dma_rx_param); + + if (!chan) { + dev_err(uap->port.dev, "no RX DMA channel!\n"); + return; + } + } + + if (chan) { struct dma_slave_config rx_conf = { .src_addr = uap->port.mapbase + UART01x_DR, .src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE, @@ -291,12 +307,6 @@ static void pl011_dma_probe_initcall(struct uart_amba_port *uap) .device_fc = false, }; - chan = dma_request_channel(mask, plat->dma_filter, plat->dma_rx_param); - if (!chan) { - dev_err(uap->port.dev, "no RX DMA channel!\n"); - return; - } - dmaengine_slave_config(chan, &rx_conf); uap->dmarx.chan = chan; @@ -315,6 +325,7 @@ static void pl011_dma_probe_initcall(struct uart_amba_port *uap) struct dma_uap { struct list_head node; struct uart_amba_port *uap; + struct device *dev; }; static LIST_HEAD(pl011_dma_uarts); @@ -325,7 +336,7 @@ static int __init pl011_dma_initcall(void) list_for_each_safe(node, tmp, &pl011_dma_uarts) { struct dma_uap *dmau = list_entry(node, struct dma_uap, node); - pl011_dma_probe_initcall(dmau->uap); + pl011_dma_probe_initcall(dmau->dev, dmau->uap); list_del(node); kfree(dmau); } @@ -334,18 +345,19 @@ static int __init pl011_dma_initcall(void) device_initcall(pl011_dma_initcall); -static void pl011_dma_probe(struct uart_amba_port *uap) +static void pl011_dma_probe(struct device *dev, struct uart_amba_port *uap) { struct dma_uap *dmau = kzalloc(sizeof(struct dma_uap), GFP_KERNEL); if (dmau) { dmau->uap = uap; + dmau->dev = dev; list_add_tail(&dmau->node, &pl011_dma_uarts); } } #else -static void pl011_dma_probe(struct uart_amba_port *uap) +static void pl011_dma_probe(struct device *dev, struct uart_amba_port *uap) { - pl011_dma_probe_initcall(uap); + pl011_dma_probe_initcall(dev, uap); } #endif @@ -2020,7 +2032,7 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id) uap->port.ops = &amba_pl011_pops; uap->port.flags = UPF_BOOT_AUTOCONF; uap->port.line = i; - pl011_dma_probe(uap); + pl011_dma_probe(&dev->dev, uap); /* Ensure interrupts from this UART are masked and cleared */ writew(0, uap->port.membase + UART011_IMSC); |