diff options
| -rw-r--r-- | drivers/iio/adc/Kconfig | 22 | ||||
| -rw-r--r-- | drivers/iio/adc/Makefile | 3 | ||||
| -rw-r--r-- | drivers/iio/adc/ad7793.c (renamed from drivers/staging/iio/adc/ad7793.c) | 384 | ||||
| -rw-r--r-- | drivers/iio/adc/ti-adc081c.c | 161 | ||||
| -rw-r--r-- | drivers/iio/gyro/adis16136.c | 5 | ||||
| -rw-r--r-- | drivers/iio/imu/adis16480.c | 5 | ||||
| -rw-r--r-- | drivers/staging/iio/adc/Kconfig | 12 | ||||
| -rw-r--r-- | drivers/staging/iio/adc/Makefile | 1 | ||||
| -rw-r--r-- | drivers/staging/iio/adc/ad7793.h | 115 | ||||
| -rw-r--r-- | include/linux/platform_data/ad7793.h | 112 |
10 files changed, 649 insertions, 171 deletions
diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig index cd5eed60be28..961b8d0a4bac 100644 --- a/drivers/iio/adc/Kconfig +++ b/drivers/iio/adc/Kconfig @@ -42,6 +42,18 @@ config AD7791 To compile this driver as a module, choose M here: the module will be called ad7791. +config AD7793 + tristate "Analog Devices AD7793 and similar ADCs driver" + depends on SPI + select AD_SIGMA_DELTA + help + Say yes here to build support for Analog Devices AD7785, AD7792, AD7793, + AD7794 and AD7795 SPI analog to digital converters (ADC). + If unsure, say N (but it's safe to say "Y"). + + To compile this driver as a module, choose M here: the + module will be called AD7793. + config AD7476 tristate "Analog Devices AD7476 and similar 1-channel ADCs driver" depends on SPI @@ -103,4 +115,14 @@ config MAX1363 max11646, max11647) Provides direct access via sysfs and buffered data via the iio dev interface. +config TI_ADC081C + tristate "Texas Instruments ADC081C021/027" + depends on I2C + help + If you say yes here you get support for Texas Instruments ADC081C021 + and ADC081C027 ADC chips. + + This driver can also be built as a module. If so, the module will be + called ti-adc081c. + endmenu diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile index 3256dc64a466..472fd7cd2417 100644 --- a/drivers/iio/adc/Makefile +++ b/drivers/iio/adc/Makefile @@ -7,7 +7,10 @@ obj-$(CONFIG_AD7266) += ad7266.o obj-$(CONFIG_AD7298) += ad7298.o obj-$(CONFIG_AD7476) += ad7476.o obj-$(CONFIG_AD7791) += ad7791.o +obj-$(CONFIG_AD7793) += ad7793.o obj-$(CONFIG_AD7887) += ad7887.o obj-$(CONFIG_AT91_ADC) += at91_adc.o obj-$(CONFIG_LP8788_ADC) += lp8788_adc.o obj-$(CONFIG_MAX1363) += max1363.o +obj-$(CONFIG_TI_ADC081C) += ti-adc081c.o + diff --git a/drivers/staging/iio/adc/ad7793.c b/drivers/iio/adc/ad7793.c index b0a57e475410..334e31ff7a4e 100644 --- a/drivers/staging/iio/adc/ad7793.c +++ b/drivers/iio/adc/ad7793.c @@ -25,8 +25,106 @@ #include <linux/iio/trigger_consumer.h> #include <linux/iio/triggered_buffer.h> #include <linux/iio/adc/ad_sigma_delta.h> - -#include "ad7793.h" +#include <linux/platform_data/ad7793.h> + +/* Registers */ +#define AD7793_REG_COMM 0 /* Communications Register (WO, 8-bit) */ +#define AD7793_REG_STAT 0 /* Status Register (RO, 8-bit) */ +#define AD7793_REG_MODE 1 /* Mode Register (RW, 16-bit */ +#define AD7793_REG_CONF 2 /* Configuration Register (RW, 16-bit) */ +#define AD7793_REG_DATA 3 /* Data Register (RO, 16-/24-bit) */ +#define AD7793_REG_ID 4 /* ID Register (RO, 8-bit) */ +#define AD7793_REG_IO 5 /* IO Register (RO, 8-bit) */ +#define AD7793_REG_OFFSET 6 /* Offset Register (RW, 16-bit + * (AD7792)/24-bit (AD7793)) */ +#define AD7793_REG_FULLSALE 7 /* Full-Scale Register + * (RW, 16-bit (AD7792)/24-bit (AD7793)) */ + +/* Communications Register Bit Designations (AD7793_REG_COMM) */ +#define AD7793_COMM_WEN (1 << 7) /* Write Enable */ +#define AD7793_COMM_WRITE (0 << 6) /* Write Operation */ +#define AD7793_COMM_READ (1 << 6) /* Read Operation */ +#define AD7793_COMM_ADDR(x) (((x) & 0x7) << 3) /* Register Address */ +#define AD7793_COMM_CREAD (1 << 2) /* Continuous Read of Data Register */ + +/* Status Register Bit Designations (AD7793_REG_STAT) */ +#define AD7793_STAT_RDY (1 << 7) /* Ready */ +#define AD7793_STAT_ERR (1 << 6) /* Error (Overrange, Underrange) */ +#define AD7793_STAT_CH3 (1 << 2) /* Channel 3 */ +#define AD7793_STAT_CH2 (1 << 1) /* Channel 2 */ +#define AD7793_STAT_CH1 (1 << 0) /* Channel 1 */ + +/* Mode Register Bit Designations (AD7793_REG_MODE) */ +#define AD7793_MODE_SEL(x) (((x) & 0x7) << 13) /* Operation Mode Select */ +#define AD7793_MODE_SEL_MASK (0x7 << 13) /* Operation Mode Select mask */ +#define AD7793_MODE_CLKSRC(x) (((x) & 0x3) << 6) /* ADC Clock Source Select */ +#define AD7793_MODE_RATE(x) ((x) & 0xF) /* Filter Update Rate Select */ + +#define AD7793_MODE_CONT 0 /* Continuous Conversion Mode */ +#define AD7793_MODE_SINGLE 1 /* Single Conversion Mode */ +#define AD7793_MODE_IDLE 2 /* Idle Mode */ +#define AD7793_MODE_PWRDN 3 /* Power-Down Mode */ +#define AD7793_MODE_CAL_INT_ZERO 4 /* Internal Zero-Scale Calibration */ +#define AD7793_MODE_CAL_INT_FULL 5 /* Internal Full-Scale Calibration */ +#define AD7793_MODE_CAL_SYS_ZERO 6 /* System Zero-Scale Calibration */ +#define AD7793_MODE_CAL_SYS_FULL 7 /* System Full-Scale Calibration */ + +#define AD7793_CLK_INT 0 /* Internal 64 kHz Clock not + * available at the CLK pin */ +#define AD7793_CLK_INT_CO 1 /* Internal 64 kHz Clock available + * at the CLK pin */ +#define AD7793_CLK_EXT 2 /* External 64 kHz Clock */ +#define AD7793_CLK_EXT_DIV2 3 /* External Clock divided by 2 */ + +/* Configuration Register Bit Designations (AD7793_REG_CONF) */ +#define AD7793_CONF_VBIAS(x) (((x) & 0x3) << 14) /* Bias Voltage + * Generator Enable */ +#define AD7793_CONF_BO_EN (1 << 13) /* Burnout Current Enable */ +#define AD7793_CONF_UNIPOLAR (1 << 12) /* Unipolar/Bipolar Enable */ +#define AD7793_CONF_BOOST (1 << 11) /* Boost Enable */ +#define AD7793_CONF_GAIN(x) (((x) & 0x7) << 8) /* Gain Select */ +#define AD7793_CONF_REFSEL(x) ((x) << 6) /* INT/EXT Reference Select */ +#define AD7793_CONF_BUF (1 << 4) /* Buffered Mode Enable */ +#define AD7793_CONF_CHAN(x) ((x) & 0xf) /* Channel select */ +#define AD7793_CONF_CHAN_MASK 0xf /* Channel select mask */ + +#define AD7793_CH_AIN1P_AIN1M 0 /* AIN1(+) - AIN1(-) */ +#define AD7793_CH_AIN2P_AIN2M 1 /* AIN2(+) - AIN2(-) */ +#define AD7793_CH_AIN3P_AIN3M 2 /* AIN3(+) - AIN3(-) */ +#define AD7793_CH_AIN1M_AIN1M 3 /* AIN1(-) - AIN1(-) */ +#define AD7793_CH_TEMP 6 /* Temp Sensor */ +#define AD7793_CH_AVDD_MONITOR 7 /* AVDD Monitor */ + +#define AD7795_CH_AIN4P_AIN4M 4 /* AIN4(+) - AIN4(-) */ +#define AD7795_CH_AIN5P_AIN5M 5 /* AIN5(+) - AIN5(-) */ +#define AD7795_CH_AIN6P_AIN6M 6 /* AIN6(+) - AIN6(-) */ +#define AD7795_CH_AIN1M_AIN1M 8 /* AIN1(-) - AIN1(-) */ + +/* ID Register Bit Designations (AD7793_REG_ID) */ +#define AD7785_ID 0xB +#define AD7792_ID 0xA +#define AD7793_ID 0xB +#define AD7794_ID 0xF +#define AD7795_ID 0xF +#define AD7796_ID 0xA +#define AD7797_ID 0xB +#define AD7798_ID 0x8 +#define AD7799_ID 0x9 +#define AD7793_ID_MASK 0xF + +/* IO (Excitation Current Sources) Register Bit Designations (AD7793_REG_IO) */ +#define AD7793_IO_IEXC1_IOUT1_IEXC2_IOUT2 0 /* IEXC1 connect to IOUT1, + * IEXC2 connect to IOUT2 */ +#define AD7793_IO_IEXC1_IOUT2_IEXC2_IOUT1 1 /* IEXC1 connect to IOUT2, + * IEXC2 connect to IOUT1 */ +#define AD7793_IO_IEXC1_IEXC2_IOUT1 2 /* Both current sources + * IEXC1,2 connect to IOUT1 */ +#define AD7793_IO_IEXC1_IEXC2_IOUT2 3 /* Both current sources + * IEXC1,2 connect to IOUT2 */ + +#define AD7793_IO_IXCEN_10uA (1 << 0) /* Excitation Current 10uA */ +#define AD7793_IO_IXCEN_210uA (2 << 0) /* Excitation Current 210uA */ +#define AD7793_IO_IXCEN_1mA (3 << 0) /* Excitation Current 1mA */ /* NOTE: * The AD7792/AD7793 features a dual use data out ready DOUT/RDY output. @@ -36,9 +134,21 @@ * The DOUT/RDY output must also be wired to an interrupt capable GPIO. */ +#define AD7793_FLAG_HAS_CLKSEL BIT(0) +#define AD7793_FLAG_HAS_REFSEL BIT(1) +#define AD7793_FLAG_HAS_VBIAS BIT(2) +#define AD7793_HAS_EXITATION_CURRENT BIT(3) +#define AD7793_FLAG_HAS_GAIN BIT(4) +#define AD7793_FLAG_HAS_BUFFER BIT(5) + struct ad7793_chip_info { + unsigned int id; const struct iio_chan_spec *channels; unsigned int num_channels; + unsigned int flags; + + const struct iio_info *iio_info; + const u16 *sample_freq_avail; }; struct ad7793_state { @@ -59,6 +169,10 @@ enum ad7793_supported_device_ids { ID_AD7793, ID_AD7794, ID_AD7795, + ID_AD7796, + ID_AD7797, + ID_AD7798, + ID_AD7799, }; static struct ad7793_state *ad_sigma_delta_to_ad7793(struct ad_sigma_delta *sd) @@ -110,19 +224,52 @@ static int ad7793_calibrate_all(struct ad7793_state *st) ARRAY_SIZE(ad7793_calib_arr)); } -static int ad7793_setup(struct iio_dev *indio_dev, +static int ad7793_check_platform_data(struct ad7793_state *st, const struct ad7793_platform_data *pdata) { + if ((pdata->current_source_direction == AD7793_IEXEC1_IEXEC2_IOUT1 || + pdata->current_source_direction == AD7793_IEXEC1_IEXEC2_IOUT2) && + ((pdata->exitation_current != AD7793_IX_10uA) && + (pdata->exitation_current != AD7793_IX_210uA))) + return -EINVAL; + + if (!(st->chip_info->flags & AD7793_FLAG_HAS_CLKSEL) && + pdata->clock_src != AD7793_CLK_SRC_INT) + return -EINVAL; + + if (!(st->chip_info->flags & AD7793_FLAG_HAS_REFSEL) && + pdata->refsel != AD7793_REFSEL_REFIN1) + return -EINVAL; + + if (!(st->chip_info->flags & AD7793_FLAG_HAS_VBIAS) && + pdata->bias_voltage != AD7793_BIAS_VOLTAGE_DISABLED) + return -EINVAL; + + if (!(st->chip_info->flags & AD7793_HAS_EXITATION_CURRENT) && + pdata->exitation_current != AD7793_IX_DISABLED) + return -EINVAL; + + return 0; +} + +static int ad7793_setup(struct iio_dev *indio_dev, + const struct ad7793_platform_data *pdata, + unsigned int vref_mv) +{ struct ad7793_state *st = iio_priv(indio_dev); int i, ret = -1; unsigned long long scale_uv; u32 id; + ret = ad7793_check_platform_data(st, pdata); + if (ret) + return ret; + /* reset the serial interface */ ret = spi_write(st->sd.spi, (u8 *)&ret, sizeof(ret)); if (ret < 0) goto out; - msleep(1); /* Wait for at least 500us */ + usleep_range(500, 2000); /* Wait for at least 500us */ /* write/read test for device presence */ ret = ad_sd_read_reg(&st->sd, AD7793_REG_ID, 1, &id); @@ -131,13 +278,32 @@ static int ad7793_setup(struct iio_dev *indio_dev, id &= AD7793_ID_MASK; - if (!((id == AD7792_ID) || (id == AD7793_ID) || (id == AD7795_ID))) { + if (id != st->chip_info->id) { dev_err(&st->sd.spi->dev, "device ID query failed\n"); goto out; } - st->mode = pdata->mode; - st->conf = pdata->conf; + st->mode = AD7793_MODE_RATE(1); + st->conf = 0; + + if (st->chip_info->flags & AD7793_FLAG_HAS_CLKSEL) + st->mode |= AD7793_MODE_CLKSRC(pdata->clock_src); + if (st->chip_info->flags & AD7793_FLAG_HAS_REFSEL) + st->conf |= AD7793_CONF_REFSEL(pdata->refsel); + if (st->chip_info->flags & AD7793_FLAG_HAS_VBIAS) + st->conf |= AD7793_CONF_VBIAS(pdata->bias_voltage); + if (pdata->buffered || !(st->chip_info->flags & AD7793_FLAG_HAS_BUFFER)) + st->conf |= AD7793_CONF_BUF; + if (pdata->boost_enable && + (st->chip_info->flags & AD7793_FLAG_HAS_VBIAS)) + st->conf |= AD7793_CONF_BOOST; + if (pdata->burnout_current) + st->conf |= AD7793_CONF_BO_EN; + if (pdata->unipolar) + st->conf |= AD7793_CONF_UNIPOLAR; + + if (!(st->chip_info->flags & AD7793_FLAG_HAS_GAIN)) + st->conf |= AD7793_CONF_GAIN(7); ret = ad7793_set_mode(&st->sd, AD_SD_MODE_IDLE); if (ret) @@ -147,10 +313,13 @@ static int ad7793_setup(struct iio_dev *indio_dev, if (ret) goto out; - ret = ad_sd_write_reg(&st->sd, AD7793_REG_IO, - sizeof(pdata->io), pdata->io); - if (ret) - goto out; + if (st->chip_info->flags & AD7793_HAS_EXITATION_CURRENT) { + ret = ad_sd_write_reg(&st->sd, AD7793_REG_IO, 1, + pdata->exitation_current | + (pdata->current_source_direction << 2)); + if (ret) + goto out; + } ret = ad7793_calibrate_all(st); if (ret) @@ -158,7 +327,7 @@ static int ad7793_setup(struct iio_dev *indio_dev, /* Populate available ADC input ranges */ for (i = 0; i < ARRAY_SIZE(st->scale_avail); i++) { - scale_uv = ((u64)st->int_vref_mv * 100000000) + scale_uv = ((u64)vref_mv * 100000000) >> (st->chip_info->channels[0].scan_type.realbits - (!!(st->conf & AD7793_CONF_UNIPOLAR) ? 0 : 1)); scale_uv >>= i; @@ -173,8 +342,11 @@ out: return ret; } -static const u16 sample_freq_avail[16] = {0, 470, 242, 123, 62, 50, 39, 33, 19, - 17, 16, 12, 10, 8, 6, 4}; +static const u16 ad7793_sample_freq_avail[16] = {0, 470, 242, 123, 62, 50, 39, + 33, 19, 17, 16, 12, 10, 8, 6, 4}; + +static const u16 ad7797_sample_freq_avail[16] = {0, 0, 0, 123, 62, 50, 0, + 33, 0, 17, 16, 12, 10, 8, 6, 4}; static ssize_t ad7793_read_frequency(struct device *dev, struct device_attribute *attr, @@ -184,7 +356,7 @@ static ssize_t ad7793_read_frequency(struct device *dev, struct ad7793_state *st = iio_priv(indio_dev); return sprintf(buf, "%d\n", - sample_freq_avail[AD7793_MODE_RATE(st->mode)]); + st->chip_info->sample_freq_avail[AD7793_MODE_RATE(st->mode)]); } static ssize_t ad7793_write_frequency(struct device *dev, @@ -204,14 +376,17 @@ static ssize_t ad7793_write_frequency(struct device *dev, } mutex_unlock(&indio_dev->mlock); - ret = strict_strtol(buf, 10, &lval); + ret = kstrtol(buf, 10, &lval); if (ret) return ret; + if (lval == 0) + return -EINVAL; + ret = -EINVAL; - for (i = 0; i < ARRAY_SIZE(sample_freq_avail); i++) - if (lval == sample_freq_avail[i]) { + for (i = 0; i < 16; i++) + if (lval == st->chip_info->sample_freq_avail[i]) { mutex_lock(&indio_dev->mlock); st->mode &= ~AD7793_MODE_RATE(-1); st->mode |= AD7793_MODE_RATE(i); @@ -231,6 +406,9 @@ static IIO_DEV_ATTR_SAMP_FREQ(S_IWUSR | S_IRUGO, static IIO_CONST_ATTR_SAMP_FREQ_AVAIL( "470 242 123 62 50 39 33 19 17 16 12 10 8 6 4"); +static IIO_CONST_ATTR_NAMED(sampling_frequency_available_ad7797, + sampling_frequency_available, "123 62 50 33 17 16 12 10 8 6 4"); + static ssize_t ad7793_show_scale_available(struct device *dev, struct device_attribute *attr, char *buf) { @@ -262,6 +440,16 @@ static const struct attribute_group ad7793_attribute_group = { .attrs = ad7793_attributes, }; +static struct attribute *ad7797_attributes[] = { + &iio_dev_attr_sampling_frequency.dev_attr.attr, + &iio_const_attr_sampling_frequency_available_ad7797.dev_attr.attr, + NULL +}; + +static const struct attribute_group ad7797_attribute_group = { + .attrs = ad7797_attributes, +}; + static int ad7793_read_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *chan, int *val, @@ -292,12 +480,12 @@ static int ad7793_read_raw(struct iio_dev *indio_dev, return IIO_VAL_INT_PLUS_NANO; } else { /* 1170mV / 2^23 * 6 */ - scale_uv = (1170ULL * 100000000ULL * 6ULL); + scale_uv = (1170ULL * 1000000000ULL * 6ULL); } break; case IIO_TEMP: /* 1170mV / 0.81 mV/C / 2^23 */ - scale_uv = 1444444444444ULL; + scale_uv = 1444444444444444ULL; break; default: return -EINVAL; @@ -387,6 +575,15 @@ static const struct iio_info ad7793_info = { .driver_module = THIS_MODULE, }; +static const struct iio_info ad7797_info = { + .read_raw = &ad7793_read_raw, + .write_raw = &ad7793_write_raw, + .write_raw_get_fmt = &ad7793_write_raw_get_fmt, + .attrs = &ad7793_attribute_group, + .validate_trigger = ad_sd_validate_trigger, + .driver_module = THIS_MODULE, +}; + #define DECLARE_AD7793_CHANNELS(_name, _b, _sb, _s) \ const struct iio_chan_spec _name##_channels[] = { \ AD_SD_DIFF_CHANNEL(0, 0, 0, AD7793_CH_AIN1P_AIN1M, (_b), (_sb), (_s)), \ @@ -412,32 +609,134 @@ const struct iio_chan_spec _name##_channels[] = { \ IIO_CHAN_SOFT_TIMESTAMP(9), \ } +#define DECLARE_AD7797_CHANNELS(_name, _b, _sb) \ +const struct iio_chan_spec _name##_channels[] = { \ + AD_SD_DIFF_CHANNEL(0, 0, 0, AD7793_CH_AIN1P_AIN1M, (_b), (_sb), 0), \ + AD_SD_SHORTED_CHANNEL(1, 0, AD7793_CH_AIN1M_AIN1M, (_b), (_sb), 0), \ + AD_SD_TEMP_CHANNEL(2, AD7793_CH_TEMP, (_b), (_sb), 0), \ + AD_SD_SUPPLY_CHANNEL(3, 3, AD7793_CH_AVDD_MONITOR, (_b), (_sb), 0), \ + IIO_CHAN_SOFT_TIMESTAMP(4), \ +} + +#define DECLARE_AD7799_CHANNELS(_name, _b, _sb) \ +const struct iio_chan_spec _name##_channels[] = { \ + AD_SD_DIFF_CHANNEL(0, 0, 0, AD7793_CH_AIN1P_AIN1M, (_b), (_sb), 0), \ + AD_SD_DIFF_CHANNEL(1, 1, 1, AD7793_CH_AIN2P_AIN2M, (_b), (_sb), 0), \ + AD_SD_DIFF_CHANNEL(2, 2, 2, AD7793_CH_AIN3P_AIN3M, (_b), (_sb), 0), \ + AD_SD_SHORTED_CHANNEL(3, 0, AD7793_CH_AIN1M_AIN1M, (_b), (_sb), 0), \ + AD_SD_SUPPLY_CHANNEL(4, 3, AD7793_CH_AVDD_MONITOR, (_b), (_sb), 0), \ + IIO_CHAN_SOFT_TIMESTAMP(5), \ +} + static DECLARE_AD7793_CHANNELS(ad7785, 20, 32, 4); static DECLARE_AD7793_CHANNELS(ad7792, 16, 32, 0); static DECLARE_AD7793_CHANNELS(ad7793, 24, 32, 0); static DECLARE_AD7795_CHANNELS(ad7794, 16, 32); static DECLARE_AD7795_CHANNELS(ad7795, 24, 32); +static DECLARE_AD7797_CHANNELS(ad7796, 16, 16); +static DECLARE_AD7797_CHANNELS(ad7797, 24, 32); +static DECLARE_AD7799_CHANNELS(ad7798, 16, 16); +static DECLARE_AD7799_CHANNELS(ad7799, 24, 32); static const struct ad7793_chip_info ad7793_chip_info_tbl[] = { [ID_AD7785] = { + .id = AD7785_ID, .channels = ad7785_channels, .num_channels = ARRAY_SIZE(ad7785_channels), + .iio_info = &ad7793_info, + .sample_freq_avail = ad7793_sample_freq_avail, + .flags = AD7793_FLAG_HAS_CLKSEL | + AD7793_FLAG_HAS_REFSEL | + AD7793_FLAG_HAS_VBIAS | + AD7793_HAS_EXITATION_CURRENT | + AD7793_FLAG_HAS_GAIN | + AD7793_FLAG_HAS_BUFFER, }, [ID_AD7792] = { + .id = AD7792_ID, .channels = ad7792_channels, .num_channels = ARRAY_SIZE(ad7792_channels), + .iio_info = &ad7793_info, + .sample_freq_avail = ad7793_sample_freq_avail, + .flags = AD7793_FLAG_HAS_CLKSEL | + AD7793_FLAG_HAS_REFSEL | + AD7793_FLAG_HAS_VBIAS | + AD7793_HAS_EXITATION_CURRENT | + AD7793_FLAG_HAS_GAIN | + AD7793_FLAG_HAS_BUFFER, }, [ID_AD7793] = { + .id = AD7793_ID, .channels = ad7793_channels, .num_channels = ARRAY_SIZE(ad7793_channels), + .iio_info = &ad7793_info, + .sample_freq_avail = ad7793_sample_freq_avail, + .flags = AD7793_FLAG_HAS_CLKSEL | + AD7793_FLAG_HAS_REFSEL | + AD7793_FLAG_HAS_VBIAS | + AD7793_HAS_EXITATION_CURRENT | + AD7793_FLAG_HAS_GAIN | + AD7793_FLAG_HAS_BUFFER, }, [ID_AD7794] = { + .id = AD7794_ID, .channels = ad7794_channels, .num_channels = ARRAY_SIZE(ad7794_channels), + .iio_info = &ad7793_info, + .sample_freq_avail = ad7793_sample_freq_avail, + .flags = AD7793_FLAG_HAS_CLKSEL | + AD7793_FLAG_HAS_REFSEL | + AD7793_FLAG_HAS_VBIAS | + AD7793_HAS_EXITATION_CURRENT | + AD7793_FLAG_HAS_GAIN | + AD7793_FLAG_HAS_BUFFER, }, [ID_AD7795] = { + .id = AD7795_ID, .channels = ad7795_channels, .num_channels = ARRAY_SIZE(ad7795_channels), + .iio_info = &ad7793_info, + .sample_freq_avail = ad7793_sample_freq_avail, + .flags = AD7793_FLAG_HAS_CLKSEL | + AD7793_FLAG_HAS_REFSEL | + AD7793_FLAG_HAS_VBIAS | + AD7793_HAS_EXITATION_CURRENT | + AD7793_FLAG_HAS_GAIN | + AD7793_FLAG_HAS_BUFFER, + }, + [ID_AD7796] = { + .id = AD7796_ID, + .channels = ad7796_channels, + .num_channels = ARRAY_SIZE(ad7796_channels), + .iio_info = &ad7797_info, + .sample_freq_avail = ad7797_sample_freq_avail, + .flags = AD7793_FLAG_HAS_CLKSEL, + }, + [ID_AD7797] = { + .id = AD7797_ID, + .channels = ad7797_channels, + .num_channels = ARRAY_SIZE(ad7797_channels), + .iio_info = &ad7797_info, + .sample_freq_avail = ad7797_sample_freq_avail, + .flags = AD7793_FLAG_HAS_CLKSEL, + }, + [ID_AD7798] = { + .id = AD7798_ID, + .channels = ad7798_channels, + .num_channels = ARRAY_SIZE(ad7798_channels), + .iio_info = &ad7793_info, + .sample_freq_avail = ad7793_sample_freq_avail, + .flags = AD7793_FLAG_HAS_GAIN | + AD7793_FLAG_HAS_BUFFER, + }, + [ID_AD7799] = { + .id = AD7799_ID, + .channels = ad7799_channels, + .num_channels = ARRAY_SIZE(ad7799_channels), + .iio_info = &ad7793_info, + .sample_freq_avail = ad7793_sample_freq_avail, + .flags = AD7793_FLAG_HAS_GAIN | + AD7793_FLAG_HAS_BUFFER, }, }; @@ -446,7 +745,7 @@ static int ad7793_probe(struct spi_device *spi) const struct ad7793_platform_data *pdata = spi->dev.platform_data; struct ad7793_state *st; struct iio_dev *indio_dev; - int ret, voltage_uv = 0; + int ret, vref_mv = 0; if (!pdata) { dev_err(&spi->dev, "no platform data?\n"); @@ -466,25 +765,31 @@ static int ad7793_probe(struct spi_device *spi) ad_sd_init(&st->sd, indio_dev, spi, &ad7793_sigma_delta_info); - st->reg = regulator_get(&spi->dev, "vcc"); - if (!IS_ERR(st->reg)) { + if (pdata->refsel != AD7793_REFSEL_INTERNAL) { + st->reg = regulator_get(&spi->dev, "refin"); + if (IS_ERR(st->reg)) { + ret = PTR_ERR(st->reg); + goto error_device_free; + } + ret = regulator_enable(st->reg); if (ret) goto error_put_reg; - voltage_uv = regulator_get_voltage(st->reg); + vref_mv = regulator_get_voltage(st->reg); + if (vref_mv < 0) { + ret = vref_mv; + goto error_disable_reg; + } + + vref_mv /= 1000; + } else { + vref_mv = 1170; /* Build-in ref */ } st->chip_info = &ad7793_chip_info_tbl[spi_get_device_id(spi)->driver_data]; - if (pdata && pdata->vref_mv) - st->int_vref_mv = pdata->vref_mv; - else if (voltage_uv) - st->int_vref_mv = voltage_uv / 1000; - else - st->int_vref_mv = 1170; /* Build-in ref */ - spi_set_drvdata(spi, indio_dev); indio_dev->dev.parent = &spi->dev; @@ -492,13 +797,13 @@ static int ad7793_probe(struct spi_device *spi) indio_dev->modes = INDIO_DIRECT_MODE; indio_dev->channels = st->chip_info->channels; indio_dev->num_channels = st->chip_info->num_channels; - indio_dev->info = &ad7793_info; + indio_dev->info = st->chip_info->iio_info; ret = ad_sd_setup_buffer_and_trigger(indio_dev); if (ret) goto error_disable_reg; - ret = ad7793_setup(indio_dev, pdata); + ret = ad7793_setup(indio_dev, pdata, vref_mv); if (ret) goto error_remove_trigger; @@ -511,12 +816,12 @@ static int ad7793_probe(struct spi_device *spi) error_remove_trigger: ad_sd_cleanup_buffer_and_trigger(indio_dev); error_disable_reg: - if (!IS_ERR(st->reg)) + if (pdata->refsel != AD7793_REFSEL_INTERNAL) regulator_disable(st->reg); error_put_reg: - if (!IS_ERR(st->reg)) + if (pdata->refsel != AD7793_REFSEL_INTERNAL) regulator_put(st->reg); - +error_device_free: iio_device_free(indio_dev); return ret; @@ -524,13 +829,14 @@ error_put_reg: static int ad7793_remove(struct spi_device *spi) { + const struct ad7793_platform_data *pdata = spi->dev.platform_data; struct iio_dev *indio_dev = spi_get_drvdata(spi); struct ad7793_state *st = iio_priv(indio_dev); iio_device_unregister(indio_dev); ad_sd_cleanup_buffer_and_trigger(indio_dev); - if (!IS_ERR(st->reg)) { + if (pdata->refsel != AD7793_REFSEL_INTERNAL) { regulator_disable(st->reg); regulator_put(st->reg); } @@ -546,6 +852,10 @@ static const struct spi_device_id ad7793_id[] = { {"ad7793", ID_AD7793}, {"ad7794", ID_AD7794}, {"ad7795", ID_AD7795}, + {"ad7796", ID_AD7796}, + {"ad7797", ID_AD7797}, + {"ad7798", ID_AD7798}, + {"ad7799", ID_AD7799}, {} }; MODULE_DEVICE_TABLE(spi, ad7793_id); diff --git a/drivers/iio/adc/ti-adc081c.c b/drivers/iio/adc/ti-adc081c.c new file mode 100644 index 000000000000..f4a46dd8f43b --- /dev/null +++ b/drivers/iio/adc/ti-adc081c.c @@ -0,0 +1,161 @@ +/* + * Copyright (C) 2012 Avionic Design GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/err.h> +#include <linux/i2c.h> +#include <linux/module.h> + +#include <linux/iio/iio.h> +#include <linux/regulator/consumer.h> + +struct adc081c { + struct i2c_client *i2c; + struct regulator *ref; +}; + +#define REG_CONV_RES 0x00 + +static int adc081c_read_raw(struct iio_dev *iio, + struct iio_chan_spec const *channel, int *value, + int *shift, long mask) +{ + struct adc081c *adc = iio_priv(iio); + int err; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + err = i2c_smbus_read_word_swapped(adc->i2c, REG_CONV_RES); + if (err < 0) + return err; + + *value = (err >> 4) & 0xff; + return IIO_VAL_INT; + + case IIO_CHAN_INFO_SCALE: + err = regulator_get_voltage(adc->ref); + if (err < 0) + return err; + + *value = err / 1000; + *shift = 8; + + return IIO_VAL_FRACTIONAL_LOG2; + + default: + break; + } + + return -EINVAL; +} + +static const struct iio_chan_spec adc081c_channel = { + .type = IIO_VOLTAGE, + .info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT | + IIO_CHAN_INFO_RAW_SEPARATE_BIT, +}; + +static const struct iio_info adc081c_info = { + .read_raw = adc081c_read_raw, + .driver_module = THIS_MODULE, +}; + +static int adc081c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct iio_dev *iio; + struct adc081c *adc; + int err; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA)) + return -ENODEV; + + iio = iio_device_alloc(sizeof(*adc)); + if (!iio) + return -ENOMEM; + + adc = iio_priv(iio); + adc->i2c = client; + + adc->ref = regulator_get(&client->dev, "vref"); + if (IS_ERR(adc->ref)) { + err = PTR_ERR(adc->ref); + goto iio_free; + } + + err = regulator_enable(adc->ref); + if (err < 0) + goto regulator_put; + + iio->dev.parent = &client->dev; + iio->name = dev_name(&client->dev); + iio->modes = INDIO_DIRECT_MODE; + iio->info = &adc081c_info; + + iio->channels = &adc081c_channel; + iio->num_channels = 1; + + err = iio_device_register(iio); + if (err < 0) + goto regulator_disable; + + i2c_set_clientdata(client, iio); + + return 0; + +regulator_disable: + regulator_disable(adc->ref); +regulator_put: + regulator_put(adc->ref); +iio_free: + iio_device_free(iio); + + return err; +} + +static int adc081c_remove(struct i2c_client *client) +{ + struct iio_dev *iio = i2c_get_clientdata(client); + struct adc081c *adc = iio_priv(iio); + + iio_device_unregister(iio); + regulator_disable(adc->ref); + regulator_put(adc->ref); + iio_device_free(iio); + + return 0; +} + +static const struct i2c_device_id adc081c_id[] = { + { "adc081c", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, adc081c_id); + +#ifdef CONFIG_OF +static const struct of_device_id adc081c_of_match[] = { + { .compatible = "ti,adc081c" }, + { } +}; +MODULE_DEVICE_TABLE(of, adc081c_of_match); +#endif + +static struct i2c_driver adc081c_driver = { + .driver = { + .name = "adc081c", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(adc081c_of_match), + }, + .probe = adc081c_probe, + .remove = adc081c_remove, + .id_table = adc081c_id, +}; +module_i2c_driver(adc081c_driver); + +MODULE_AUTHOR("Thierry Reding <thierry.reding@avionic-design.de>"); +MODULE_DESCRIPTION("Texas Instruments ADC081C021/027 driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/gyro/adis16136.c b/drivers/iio/gyro/adis16136.c index 05486dfd721b..8cb0bcbfd609 100644 --- a/drivers/iio/gyro/adis16136.c +++ b/drivers/iio/gyro/adis16136.c @@ -22,7 +22,6 @@ #include <linux/iio/buffer.h> #include <linux/iio/imu/adis.h> -#include <linux/iio/iio.h> #include <linux/debugfs.h> #define ADIS16136_REG_FLASH_CNT 0x00 @@ -203,10 +202,10 @@ static ssize_t adis16136_write_frequency(struct device *dev, { struct iio_dev *indio_dev = dev_to_iio_dev(dev); struct adis16136 *adis16136 = iio_priv(indio_dev); - long val; + unsigned int val; int ret; - ret = kstrtol(buf, 10, &val); + ret = kstrtouint(buf, 10, &val); if (ret) return ret; diff --git a/drivers/iio/imu/adis16480.c b/drivers/iio/imu/adis16480.c index a080b3515015..8c26a5f7cd5d 100644 --- a/drivers/iio/imu/adis16480.c +++ b/drivers/iio/imu/adis16480.c @@ -24,7 +24,6 @@ #include <linux/iio/buffer.h> #include <linux/iio/imu/adis.h> -#include <linux/iio/iio.h> #include <linux/debugfs.h> #define ADIS16480_PAGE_SIZE 0x80 @@ -125,7 +124,7 @@ static ssize_t adis16480_show_firmware_revision(struct file *file, char __user *userbuf, size_t count, loff_t *ppos) { struct adis16480 *adis16480 = file->private_data; - char buf[6]; + char buf[7]; size_t len; u16 rev; int ret; @@ -134,7 +133,7 @@ static ssize_t adis16480_show_firmware_revision(struct file *file, if (ret < 0) return ret; - len = snprintf(buf, sizeof(buf), "%x.%x\n", rev >> 8, rev & 0xff); + len = scnprintf(buf, sizeof(buf), "%x.%x\n", rev >> 8, rev & 0xff); return simple_read_from_buffer(userbuf, count, ppos, buf, len); } diff --git a/drivers/staging/iio/adc/Kconfig b/drivers/staging/iio/adc/Kconfig index dc8582b95b61..fb8c239b0c88 100644 --- a/drivers/staging/iio/adc/Kconfig +++ b/drivers/staging/iio/adc/Kconfig @@ -70,18 +70,6 @@ config AD7780 To compile this driver as a module, choose M here: the module will be called ad7780. -config AD7793 - tristate "Analog Devices AD7793 and similar ADCs driver" - depends on SPI - select AD_SIGMA_DELTA - help - Say yes here to build support for Analog Devices AD7785, AD7792, AD7793, - AD7794 and AD7795 SPI analog to digital converters (ADC). - If unsure, say N (but it's safe to say "Y"). - - To compile this driver as a module, choose M here: the - module will be called AD7793. - config AD7816 tristate "Analog Devices AD7816/7/8 temperature sensor and ADC driver" depends on SPI diff --git a/drivers/staging/iio/adc/Makefile b/drivers/staging/iio/adc/Makefile index 7281451a613a..d285596272a0 100644 --- a/drivers/staging/iio/adc/Makefile +++ b/drivers/staging/iio/adc/Makefile @@ -14,7 +14,6 @@ obj-$(CONFIG_AD799X) += ad799x.o obj-$(CONFIG_AD7291) += ad7291.o obj-$(CONFIG_AD7780) += ad7780.o -obj-$(CONFIG_AD7793) += ad7793.o obj-$(CONFIG_AD7816) += ad7816.o obj-$(CONFIG_AD7192) += ad7192.o obj-$(CONFIG_ADT7410) += adt7410.o diff --git a/drivers/staging/iio/adc/ad7793.h b/drivers/staging/iio/adc/ad7793.h deleted file mode 100644 index 8fdd450a2cd9..000000000000 --- a/drivers/staging/iio/adc/ad7793.h +++ /dev/null @@ -1,115 +0,0 @@ -/* - * AD7792/AD7793 SPI ADC driver - * - * Copyright 2011 Analog Devices Inc. - * - * Licensed under the GPL-2. - */ -#ifndef IIO_ADC_AD7793_H_ -#define IIO_ADC_AD7793_H_ - -/* - * TODO: struct ad7793_platform_data needs to go into include/linux/iio - */ - -/* Registers */ -#define AD7793_REG_COMM 0 /* Communications Register (WO, 8-bit) */ -#define AD7793_REG_STAT 0 /* Status Register (RO, 8-bit) */ -#define AD7793_REG_MODE 1 /* Mode Register (RW, 16-bit */ -#define AD7793_REG_CONF 2 /* Configuration Register (RW, 16-bit) */ -#define AD7793_REG_DATA 3 /* Data Register (RO, 16-/24-bit) */ -#define AD7793_REG_ID 4 /* ID Register (RO, 8-bit) */ -#define AD7793_REG_IO 5 /* IO Register (RO, 8-bit) */ -#define AD7793_REG_OFFSET 6 /* Offset Register (RW, 16-bit - * (AD7792)/24-bit (AD7793)) */ -#define AD7793_REG_FULLSALE 7 /* Full-Scale Register - * (RW, 16-bit (AD7792)/24-bit (AD7793)) */ - -/* Communications Register Bit Designations (AD7793_REG_COMM) */ -#define AD7793_COMM_WEN (1 << 7) /* Write Enable */ -#define AD7793_COMM_WRITE (0 << 6) /* Write Operation */ -#define AD7793_COMM_READ (1 << 6) /* Read Operation */ -#define AD7793_COMM_ADDR(x) (((x) & 0x7) << 3) /* Register Address */ -#define AD7793_COMM_CREAD (1 << 2) /* Continuous Read of Data Register */ - -/* Status Register Bit Designations (AD7793_REG_STAT) */ -#define AD7793_STAT_RDY (1 << 7) /* Ready */ -#define AD7793_STAT_ERR (1 << 6) /* Error (Overrange, Underrange) */ -#define AD7793_STAT_CH3 (1 << 2) /* Channel 3 */ -#define AD7793_STAT_CH2 (1 << 1) /* Channel 2 */ -#define AD7793_STAT_CH1 (1 << 0) /* Channel 1 */ - -/* Mode Register Bit Designations (AD7793_REG_MODE) */ -#define AD7793_MODE_SEL(x) (((x) & 0x7) << 13) /* Operation Mode Select */ -#define AD7793_MODE_SEL_MASK (0x7 << 13) /* Operation Mode Select mask */ -#define AD7793_MODE_CLKSRC(x) (((x) & 0x3) << 6) /* ADC Clock Source Select */ -#define AD7793_MODE_RATE(x) ((x) & 0xF) /* Filter Update Rate Select */ - -#define AD7793_MODE_CONT 0 /* Continuous Conversion Mode */ -#define AD7793_MODE_SINGLE 1 /* Single Conversion Mode */ -#define AD7793_MODE_IDLE 2 /* Idle Mode */ -#define AD7793_MODE_PWRDN 3 /* Power-Down Mode */ -#define AD7793_MODE_CAL_INT_ZERO 4 /* Internal Zero-Scale Calibration */ -#define AD7793_MODE_CAL_INT_FULL 5 /* Internal Full-Scale Calibration */ -#define AD7793_MODE_CAL_SYS_ZERO 6 /* System Zero-Scale Calibration */ -#define AD7793_MODE_CAL_SYS_FULL 7 /* System Full-Scale Calibration */ - -#define AD7793_CLK_INT 0 /* Internal 64 kHz Clock not - * available at the CLK pin */ -#define AD7793_CLK_INT_CO 1 /* Internal 64 kHz Clock available - * at the CLK pin */ -#define AD7793_CLK_EXT 2 /* External 64 kHz Clock */ -#define AD7793_CLK_EXT_DIV2 3 /* External Clock divided by 2 */ - -/* Configuration Register Bit Designations (AD7793_REG_CONF) */ -#define AD7793_CONF_VBIAS(x) (((x) & 0x3) << 14) /* Bias Voltage - * Generator Enable */ -#define AD7793_CONF_BO_EN (1 << 13) /* Burnout Current Enable */ -#define AD7793_CONF_UNIPOLAR (1 << 12) /* Unipolar/Bipolar Enable */ -#define AD7793_CONF_BOOST (1 << 11) /* Boost Enable */ -#define AD7793_CONF_GAIN(x) (((x) & 0x7) << 8) /* Gain Select */ -#define AD7793_CONF_REFSEL (1 << 7) /* INT/EXT Reference Select */ -#define AD7793_CONF_BUF (1 << 4) /* Buffered Mode Enable */ -#define AD7793_CONF_CHAN(x) ((x) & 0xf) /* Channel select */ -#define AD7793_CONF_CHAN_MASK 0xf /* Channel select mask */ - -#define AD7793_CH_AIN1P_AIN1M 0 /* AIN1(+) - AIN1(-) */ -#define AD7793_CH_AIN2P_AIN2M 1 /* AIN2(+) - AIN2(-) */ -#define AD7793_CH_AIN3P_AIN3M 2 /* AIN3(+) - AIN3(-) */ -#define AD7793_CH_AIN1M_AIN1M 3 /* AIN1(-) - AIN1(-) */ -#define AD7793_CH_TEMP 6 /* Temp Sensor */ -#define AD7793_CH_AVDD_MONITOR 7 /* AVDD Monitor */ - -#define AD7795_CH_AIN4P_AIN4M 4 /* AIN4(+) - AIN4(-) */ -#define AD7795_CH_AIN5P_AIN5M 5 /* AIN5(+) - AIN5(-) */ -#define AD7795_CH_AIN6P_AIN6M 6 /* AIN6(+) - AIN6(-) */ -#define AD7795_CH_AIN1M_AIN1M 8 /* AIN1(-) - AIN1(-) */ - -/* ID Register Bit Designations (AD7793_REG_ID) */ -#define AD7792_ID 0xA -#define AD7793_ID 0xB -#define AD7795_ID 0xF -#define AD7793_ID_MASK 0xF - -/* IO (Excitation Current Sources) Register Bit Designations (AD7793_REG_IO) */ -#define AD7793_IO_IEXC1_IOUT1_IEXC2_IOUT2 0 /* IEXC1 connect to IOUT1, - * IEXC2 connect to IOUT2 */ -#define AD7793_IO_IEXC1_IOUT2_IEXC2_IOUT1 1 /* IEXC1 connect to IOUT2, - * IEXC2 connect to IOUT1 */ -#define AD7793_IO_IEXC1_IEXC2_IOUT1 2 /* Both current sources - * IEXC1,2 connect to IOUT1 */ -#define AD7793_IO_IEXC1_IEXC2_IOUT2 3 /* Both current sources - * IEXC1,2 connect to IOUT2 */ - -#define AD7793_IO_IXCEN_10uA (1 << 0) /* Excitation Current 10uA */ -#define AD7793_IO_IXCEN_210uA (2 << 0) /* Excitation Current 210uA */ -#define AD7793_IO_IXCEN_1mA (3 << 0) /* Excitation Current 1mA */ - -struct ad7793_platform_data { - u16 vref_mv; - u16 mode; - u16 conf; - u8 io; -}; - -#endif /* IIO_ADC_AD7793_H_ */ diff --git a/include/linux/platform_data/ad7793.h b/include/linux/platform_data/ad7793.h new file mode 100644 index 000000000000..7ea6751aae6d --- /dev/null +++ b/include/linux/platform_data/ad7793.h @@ -0,0 +1,112 @@ +/* + * AD7792/AD7793 SPI ADC driver + * + * Copyright 2011 Analog Devices Inc. + * + * Licensed under the GPL-2. + */ +#ifndef __LINUX_PLATFORM_DATA_AD7793_H__ +#define __LINUX_PLATFORM_DATA_AD7793_H__ + +/** + * enum ad7793_clock_source - AD7793 clock source selection + * @AD7793_CLK_SRC_INT: Internal 64 kHz clock, not available at the CLK pin. + * @AD7793_CLK_SRC_INT_CO: Internal 64 kHz clock, available at the CLK pin. + * @AD7793_CLK_SRC_EXT: Use external clock. + * @AD7793_CLK_SRC_EXT_DIV2: Use external clock divided by 2. + */ +enum ad7793_clock_source { + AD7793_CLK_SRC_INT, + AD7793_CLK_SRC_INT_CO, + AD7793_CLK_SRC_EXT, + AD7793_CLK_SRC_EXT_DIV2, +}; + +/** + * enum ad7793_bias_voltage - AD7793 bias voltage selection + * @AD7793_BIAS_VOLTAGE_DISABLED: Bias voltage generator disabled + * @AD7793_BIAS_VOLTAGE_AIN1: Bias voltage connected to AIN1(-). + * @AD7793_BIAS_VOLTAGE_AIN2: Bias voltage connected to AIN2(-). + * @AD7793_BIAS_VOLTAGE_AIN3: Bias voltage connected to AIN3(-). + * Only valid for AD7795/AD7796. + */ +enum ad7793_bias_voltage { + AD7793_BIAS_VOLTAGE_DISABLED, + AD7793_BIAS_VOLTAGE_AIN1, + AD7793_BIAS_VOLTAGE_AIN2, + AD7793_BIAS_VOLTAGE_AIN3, +}; + +/** + * enum ad7793_refsel - AD7793 reference voltage selection + * @AD7793_REFSEL_REFIN1: External reference applied between REFIN1(+) + * and REFIN1(-). + * @AD7793_REFSEL_REFIN2: External reference applied between REFIN2(+) and + * and REFIN1(-). Only valid for AD7795/AD7796. + * @AD7793_REFSEL_INTERNAL: Internal 1.17 V reference. + */ +enum ad7793_refsel { + AD7793_REFSEL_REFIN1 = 0, + AD7793_REFSEL_REFIN2 = 1, + AD7793_REFSEL_INTERNAL = 2, +}; + +/** + * enum ad7793_current_source_direction - AD7793 excitation current direction + * @AD7793_IEXEC1_IOUT1_IEXEC2_IOUT2: Current source IEXC1 connected to pin + * IOUT1, current source IEXC2 connected to pin IOUT2. + * @AD7793_IEXEC1_IOUT2_IEXEC2_IOUT1: Current source IEXC2 connected to pin + * IOUT1, current source IEXC1 connected to pin IOUT2. + * @AD7793_IEXEC1_IEXEC2_IOUT1: Both current sources connected to pin IOUT1. + * Only valid when the current sources are set to 10 uA or 210 uA. + * @AD7793_IEXEC1_IEXEC2_IOUT2: Both current sources connected to Pin IOUT2. + * Only valid when the current ources are set to 10 uA or 210 uA. + */ +enum ad7793_current_source_direction { + AD7793_IEXEC1_IOUT1_IEXEC2_IOUT2 = 0, + AD7793_IEXEC1_IOUT2_IEXEC2_IOUT1 = 1, + AD7793_IEXEC1_IEXEC2_IOUT1 = 2, + AD7793_IEXEC1_IEXEC2_IOUT2 = 3, +}; + +/** + * enum ad7793_excitation_current - AD7793 excitation current selection + * @AD7793_IX_DISABLED: Excitation current Disabled. + * @AD7793_IX_10uA: Enable 10 micro-ampere excitation current. + * @AD7793_IX_210uA: Enable 210 micro-ampere excitation current. + * @AD7793_IX_1mA: Enable 1 milli-Ampere excitation current. + */ +enum ad7793_excitation_current { + AD7793_IX_DISABLED = 0, + AD7793_IX_10uA = 1, + AD7793_IX_210uA = 2, + AD7793_IX_1mA = 3, +}; + +/** + * struct ad7793_platform_data - AD7793 platform data + * @clock_src: Clock source selection + * @burnout_current: If set to true the 100nA burnout current is enabled. + * @boost_enable: Enable boost for the bias voltage generator. + * @buffered: If set to true configure the device for buffered input mode. + * @unipolar: If set to true sample in unipolar mode, if set to false sample in + * bipolar mode. + * @refsel: Reference voltage selection + * @bias_voltage: Bias voltage selection + * @exitation_current: Excitation current selection + * @current_source_direction: Excitation current direction selection + */ +struct ad7793_platform_data { + enum ad7793_clock_source clock_src; + bool burnout_current; + bool boost_enable; + bool buffered; + bool unipolar; + + enum ad7793_refsel refsel; + enum ad7793_bias_voltage bias_voltage; + enum ad7793_excitation_current exitation_current; + enum ad7793_current_source_direction current_source_direction; +}; + +#endif /* IIO_ADC_AD7793_H_ */ |