diff options
107 files changed, 20749 insertions, 4115 deletions
@@ -1572,12 +1572,12 @@ S: Wantage, New Jersey 07461 S: USA N: Harald Hoyer -E: harald.hoyer@parzelle.de -W: http://parzelle.de/ +E: harald@redhat.com +W: http://www.harald-hoyer.de D: ip_masq_quake D: md boot support -S: Hohe Strasse 30 -S: D-70176 Stuttgart +S: Am Strand 5 +S: D-19063 Schwerin S: Germany N: Jan Hubicka diff --git a/Documentation/DocBook/uio-howto.tmpl b/Documentation/DocBook/uio-howto.tmpl index ddb05e98af0d..95618159e29b 100644 --- a/Documentation/DocBook/uio-howto.tmpl +++ b/Documentation/DocBook/uio-howto.tmpl @@ -984,7 +984,7 @@ int main() return errno; } configfd = open("/sys/class/uio/uio0/device/config", O_RDWR); - if (uiofd < 0) { + if (configfd < 0) { perror("config open:"); return errno; } diff --git a/Documentation/w1/slaves/w1_therm b/Documentation/w1/slaves/w1_therm index 874a8ca93feb..cc62a95e4776 100644 --- a/Documentation/w1/slaves/w1_therm +++ b/Documentation/w1/slaves/w1_therm @@ -34,9 +34,16 @@ currently supported. The driver also doesn't support reduced precision (which would also reduce the conversion time). The module parameter strong_pullup can be set to 0 to disable the -strong pullup or 1 to enable. If enabled the 5V strong pullup will be -enabled when the conversion is taking place provided the master driver -must support the strong pullup (or it falls back to a pullup +strong pullup, 1 to enable autodetection or 2 to force strong pullup. +In case of autodetection, the driver will use the "READ POWER SUPPLY" +command to check if there are pariste powered devices on the bus. +If so, it will activate the master's strong pullup. +In case the detection of parasite devices using this command fails +(seems to be the case with some DS18S20) the strong pullup can +be force-enabled. +If the strong pullup is enabled, the master's strong pullup will be +driven when the conversion is taking place, provided the master driver +does support the strong pullup (or it falls back to a pullup resistor). The DS18b20 temperature sensor specification lists a maximum current draw of 1.5mA and that a 5k pullup resistor is not sufficient. The strong pullup is designed to provide the additional diff --git a/MAINTAINERS b/MAINTAINERS index eac5eda52640..f5b9851755a2 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5405,6 +5405,13 @@ S: Maintained F: Documentation/scsi/NinjaSCSI.txt F: drivers/scsi/nsp32* +NTB DRIVER +M: Jon Mason <jon.mason@intel.com> +S: Supported +F: drivers/ntb/ +F: drivers/net/ntb_netdev.c +F: include/linux/ntb.h + NTFS FILESYSTEM M: Anton Altaparmakov <anton@tuxera.com> L: linux-ntfs-dev@lists.sourceforge.net diff --git a/drivers/Kconfig b/drivers/Kconfig index 2b4e89ba15ad..202fa6d051b9 100644 --- a/drivers/Kconfig +++ b/drivers/Kconfig @@ -152,6 +152,8 @@ source "drivers/memory/Kconfig" source "drivers/iio/Kconfig" +source "drivers/ntb/Kconfig" + source "drivers/vme/Kconfig" source "drivers/pwm/Kconfig" diff --git a/drivers/Makefile b/drivers/Makefile index a8d32f1094b4..b359948fc02b 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -147,3 +147,4 @@ obj-$(CONFIG_MEMORY) += memory/ obj-$(CONFIG_IIO) += iio/ obj-$(CONFIG_VME_BUS) += vme/ obj-$(CONFIG_IPACK_BUS) += ipack/ +obj-$(CONFIG_NTB) += ntb/ diff --git a/drivers/char/hw_random/exynos-rng.c b/drivers/char/hw_random/exynos-rng.c index 4673fc4ad931..ac47631ab34f 100644 --- a/drivers/char/hw_random/exynos-rng.c +++ b/drivers/char/hw_random/exynos-rng.c @@ -163,7 +163,7 @@ static int exynos_rng_runtime_resume(struct device *dev) } -UNIVERSAL_DEV_PM_OPS(exynos_rng_pm_ops, exynos_rng_runtime_suspend, +static UNIVERSAL_DEV_PM_OPS(exynos_rng_pm_ops, exynos_rng_runtime_suspend, exynos_rng_runtime_resume, NULL); static struct platform_driver exynos_rng_driver = { diff --git a/drivers/char/mem.c b/drivers/char/mem.c index c6fa3bc2baa8..6f6e92a3102d 100644 --- a/drivers/char/mem.c +++ b/drivers/char/mem.c @@ -399,7 +399,7 @@ static ssize_t read_kmem(struct file *file, char __user *buf, { unsigned long p = *ppos; ssize_t low_count, read, sz; - char * kbuf; /* k-addr because vread() takes vmlist_lock rwlock */ + char *kbuf; /* k-addr because vread() takes vmlist_lock rwlock */ int err = 0; read = 0; @@ -527,7 +527,7 @@ static ssize_t write_kmem(struct file *file, const char __user *buf, unsigned long p = *ppos; ssize_t wrote = 0; ssize_t virtr = 0; - char * kbuf; /* k-addr because vwrite() takes vmlist_lock rwlock */ + char *kbuf; /* k-addr because vwrite() takes vmlist_lock rwlock */ int err = 0; if (p < (unsigned long) high_memory) { @@ -595,7 +595,7 @@ static ssize_t write_port(struct file *file, const char __user *buf, size_t count, loff_t *ppos) { unsigned long i = *ppos; - const char __user * tmp = buf; + const char __user *tmp = buf; if (!access_ok(VERIFY_READ, buf, count)) return -EFAULT; @@ -729,7 +729,7 @@ static loff_t memory_lseek(struct file *file, loff_t offset, int orig) return ret; } -static int open_port(struct inode * inode, struct file * filp) +static int open_port(struct inode *inode, struct file *filp) { return capable(CAP_SYS_RAWIO) ? 0 : -EPERM; } @@ -898,7 +898,7 @@ static int __init chr_dev_init(void) continue; /* - * Create /dev/port? + * Create /dev/port? */ if ((minor == DEVPORT_MINOR) && !arch_has_dev_port()) continue; diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c index d0c9852ab875..5c5cc00ebb07 100644 --- a/drivers/char/pcmcia/synclink_cs.c +++ b/drivers/char/pcmcia/synclink_cs.c @@ -102,8 +102,7 @@ static MGSL_PARAMS default_params = { ASYNC_PARITY_NONE /* unsigned char parity; */ }; -typedef struct -{ +typedef struct { int count; unsigned char status; char data[1]; @@ -326,10 +325,10 @@ typedef struct _mgslpc_info { #define write_reg16(info, reg, val) outw((val), (info)->io_base + (reg)) #define set_reg_bits(info, reg, mask) \ - write_reg(info, (reg), \ + write_reg(info, (reg), \ (unsigned char) (read_reg(info, (reg)) | (mask))) #define clear_reg_bits(info, reg, mask) \ - write_reg(info, (reg), \ + write_reg(info, (reg), \ (unsigned char) (read_reg(info, (reg)) & ~(mask))) /* * interrupt enable/disable routines @@ -356,10 +355,10 @@ static void irq_enable(MGSLPC_INFO *info, unsigned char channel, unsigned short } #define port_irq_disable(info, mask) \ - { info->pim_value |= (mask); write_reg(info, PIM, info->pim_value); } + { info->pim_value |= (mask); write_reg(info, PIM, info->pim_value); } #define port_irq_enable(info, mask) \ - { info->pim_value &= ~(mask); write_reg(info, PIM, info->pim_value); } + { info->pim_value &= ~(mask); write_reg(info, PIM, info->pim_value); } static void rx_start(MGSLPC_INFO *info); static void rx_stop(MGSLPC_INFO *info); @@ -397,7 +396,7 @@ static int adapter_test(MGSLPC_INFO *info); static int claim_resources(MGSLPC_INFO *info); static void release_resources(MGSLPC_INFO *info); -static void mgslpc_add_device(MGSLPC_INFO *info); +static int mgslpc_add_device(MGSLPC_INFO *info); static void mgslpc_remove_device(MGSLPC_INFO *info); static bool rx_get_frame(MGSLPC_INFO *info, struct tty_struct *tty); @@ -514,49 +513,56 @@ static const struct tty_port_operations mgslpc_port_ops = { static int mgslpc_probe(struct pcmcia_device *link) { - MGSLPC_INFO *info; - int ret; - - if (debug_level >= DEBUG_LEVEL_INFO) - printk("mgslpc_attach\n"); - - info = kzalloc(sizeof(MGSLPC_INFO), GFP_KERNEL); - if (!info) { - printk("Error can't allocate device instance data\n"); - return -ENOMEM; - } - - info->magic = MGSLPC_MAGIC; - tty_port_init(&info->port); - info->port.ops = &mgslpc_port_ops; - INIT_WORK(&info->task, bh_handler); - info->max_frame_size = 4096; - info->port.close_delay = 5*HZ/10; - info->port.closing_wait = 30*HZ; - init_waitqueue_head(&info->status_event_wait_q); - init_waitqueue_head(&info->event_wait_q); - spin_lock_init(&info->lock); - spin_lock_init(&info->netlock); - memcpy(&info->params,&default_params,sizeof(MGSL_PARAMS)); - info->idle_mode = HDLC_TXIDLE_FLAGS; - info->imra_value = 0xffff; - info->imrb_value = 0xffff; - info->pim_value = 0xff; - - info->p_dev = link; - link->priv = info; - - /* Initialize the struct pcmcia_device structure */ - - ret = mgslpc_config(link); - if (ret) { - tty_port_destroy(&info->port); - return ret; - } - - mgslpc_add_device(info); - - return 0; + MGSLPC_INFO *info; + int ret; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("mgslpc_attach\n"); + + info = kzalloc(sizeof(MGSLPC_INFO), GFP_KERNEL); + if (!info) { + printk("Error can't allocate device instance data\n"); + return -ENOMEM; + } + + info->magic = MGSLPC_MAGIC; + tty_port_init(&info->port); + info->port.ops = &mgslpc_port_ops; + INIT_WORK(&info->task, bh_handler); + info->max_frame_size = 4096; + info->port.close_delay = 5*HZ/10; + info->port.closing_wait = 30*HZ; + init_waitqueue_head(&info->status_event_wait_q); + init_waitqueue_head(&info->event_wait_q); + spin_lock_init(&info->lock); + spin_lock_init(&info->netlock); + memcpy(&info->params,&default_params,sizeof(MGSL_PARAMS)); + info->idle_mode = HDLC_TXIDLE_FLAGS; + info->imra_value = 0xffff; + info->imrb_value = 0xffff; + info->pim_value = 0xff; + + info->p_dev = link; + link->priv = info; + + /* Initialize the struct pcmcia_device structure */ + + ret = mgslpc_config(link); + if (ret != 0) + goto failed; + + ret = mgslpc_add_device(info); + if (ret != 0) + goto failed_release; + + return 0; + +failed_release: + mgslpc_release((u_long)link); +failed: + tty_port_destroy(&info->port); + kfree(info); + return ret; } /* Card has been inserted. @@ -569,35 +575,35 @@ static int mgslpc_ioprobe(struct pcmcia_device *p_dev, void *priv_data) static int mgslpc_config(struct pcmcia_device *link) { - MGSLPC_INFO *info = link->priv; - int ret; + MGSLPC_INFO *info = link->priv; + int ret; - if (debug_level >= DEBUG_LEVEL_INFO) - printk("mgslpc_config(0x%p)\n", link); + if (debug_level >= DEBUG_LEVEL_INFO) + printk("mgslpc_config(0x%p)\n", link); - link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; - ret = pcmcia_loop_config(link, mgslpc_ioprobe, NULL); - if (ret != 0) - goto failed; + ret = pcmcia_loop_config(link, mgslpc_ioprobe, NULL); + if (ret != 0) + goto failed; - link->config_index = 8; - link->config_regs = PRESENT_OPTION; + link->config_index = 8; + link->config_regs = PRESENT_OPTION; - ret = pcmcia_request_irq(link, mgslpc_isr); - if (ret) - goto failed; - ret = pcmcia_enable_device(link); - if (ret) - goto failed; + ret = pcmcia_request_irq(link, mgslpc_isr); + if (ret) + goto failed; + ret = pcmcia_enable_device(link); + if (ret) + goto failed; - info->io_base = link->resource[0]->start; - info->irq_level = link->irq; - return 0; + info->io_base = link->resource[0]->start; + info->irq_level = link->irq; + return 0; failed: - mgslpc_release((u_long)link); - return -ENODEV; + mgslpc_release((u_long)link); + return -ENODEV; } /* Card has been removed. @@ -703,12 +709,12 @@ static void tx_pause(struct tty_struct *tty) if (mgslpc_paranoia_check(info, tty->name, "tx_pause")) return; if (debug_level >= DEBUG_LEVEL_INFO) - printk("tx_pause(%s)\n",info->device_name); + printk("tx_pause(%s)\n", info->device_name); - spin_lock_irqsave(&info->lock,flags); + spin_lock_irqsave(&info->lock, flags); if (info->tx_enabled) - tx_stop(info); - spin_unlock_irqrestore(&info->lock,flags); + tx_stop(info); + spin_unlock_irqrestore(&info->lock, flags); } static void tx_release(struct tty_struct *tty) @@ -719,12 +725,12 @@ static void tx_release(struct tty_struct *tty) if (mgslpc_paranoia_check(info, tty->name, "tx_release")) return; if (debug_level >= DEBUG_LEVEL_INFO) - printk("tx_release(%s)\n",info->device_name); + printk("tx_release(%s)\n", info->device_name); - spin_lock_irqsave(&info->lock,flags); + spin_lock_irqsave(&info->lock, flags); if (!info->tx_enabled) - tx_start(info, tty); - spin_unlock_irqrestore(&info->lock,flags); + tx_start(info, tty); + spin_unlock_irqrestore(&info->lock, flags); } /* Return next bottom half action to perform. @@ -735,7 +741,7 @@ static int bh_action(MGSLPC_INFO *info) unsigned long flags; int rc = 0; - spin_lock_irqsave(&info->lock,flags); + spin_lock_irqsave(&info->lock, flags); if (info->pending_bh & BH_RECEIVE) { info->pending_bh &= ~BH_RECEIVE; @@ -754,7 +760,7 @@ static int bh_action(MGSLPC_INFO *info) info->bh_requested = false; } - spin_unlock_irqrestore(&info->lock,flags); + spin_unlock_irqrestore(&info->lock, flags); return rc; } @@ -766,7 +772,7 @@ static void bh_handler(struct work_struct *work) int action; if (debug_level >= DEBUG_LEVEL_BH) - printk( "%s(%d):bh_handler(%s) entry\n", + printk("%s(%d):bh_handler(%s) entry\n", __FILE__,__LINE__,info->device_name); info->bh_running = true; @@ -775,8 +781,8 @@ static void bh_handler(struct work_struct *work) while((action = bh_action(info)) != 0) { /* Process work item */ - if ( debug_level >= DEBUG_LEVEL_BH ) - printk( "%s(%d):bh_handler() work item action=%d\n", + if (debug_level >= DEBUG_LEVEL_BH) + printk("%s(%d):bh_handler() work item action=%d\n", __FILE__,__LINE__,action); switch (action) { @@ -799,7 +805,7 @@ static void bh_handler(struct work_struct *work) tty_kref_put(tty); if (debug_level >= DEBUG_LEVEL_BH) - printk( "%s(%d):bh_handler(%s) exit\n", + printk("%s(%d):bh_handler(%s) exit\n", __FILE__,__LINE__,info->device_name); } @@ -828,7 +834,7 @@ static void rx_ready_hdlc(MGSLPC_INFO *info, int eom) RXBUF *buf = (RXBUF*)(info->rx_buf + (info->rx_put * info->rx_buf_size)); if (debug_level >= DEBUG_LEVEL_ISR) - printk("%s(%d):rx_ready_hdlc(eom=%d)\n",__FILE__,__LINE__,eom); + printk("%s(%d):rx_ready_hdlc(eom=%d)\n", __FILE__, __LINE__, eom); if (!info->rx_enabled) return; @@ -844,7 +850,8 @@ static void rx_ready_hdlc(MGSLPC_INFO *info, int eom) if (eom) { /* end of frame, get FIFO count from RBCL register */ - if (!(fifo_count = (unsigned char)(read_reg(info, CHA+RBCL) & 0x1f))) + fifo_count = (unsigned char)(read_reg(info, CHA+RBCL) & 0x1f); + if (fifo_count == 0) fifo_count = 32; } else fifo_count = 32; @@ -889,7 +896,7 @@ static void rx_ready_async(MGSLPC_INFO *info, int tcd) unsigned char data, status, flag; int fifo_count; int work = 0; - struct mgsl_icount *icount = &info->icount; + struct mgsl_icount *icount = &info->icount; if (tcd) { /* early termination, get FIFO count from RBCL register */ @@ -994,7 +1001,7 @@ static void tx_ready(MGSLPC_INFO *info, struct tty_struct *tty) int c; if (debug_level >= DEBUG_LEVEL_ISR) - printk("%s(%d):tx_ready(%s)\n", __FILE__,__LINE__,info->device_name); + printk("%s(%d):tx_ready(%s)\n", __FILE__, __LINE__, info->device_name); if (info->params.mode == MGSL_MODE_HDLC) { if (!info->tx_active) @@ -1239,7 +1246,7 @@ static irqreturn_t mgslpc_isr(int dummy, void *dev_id) */ if (info->pending_bh && !info->bh_running && !info->bh_requested) { - if ( debug_level >= DEBUG_LEVEL_ISR ) + if (debug_level >= DEBUG_LEVEL_ISR) printk("%s(%d):%s queueing bh task.\n", __FILE__,__LINE__,info->device_name); schedule_work(&info->task); @@ -1263,7 +1270,7 @@ static int startup(MGSLPC_INFO * info, struct tty_struct *tty) int retval = 0; if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):startup(%s)\n",__FILE__,__LINE__,info->device_name); + printk("%s(%d):startup(%s)\n", __FILE__, __LINE__, info->device_name); if (info->port.flags & ASYNC_INITIALIZED) return 0; @@ -1273,7 +1280,7 @@ static int startup(MGSLPC_INFO * info, struct tty_struct *tty) info->tx_buf = (unsigned char *)get_zeroed_page(GFP_KERNEL); if (!info->tx_buf) { printk(KERN_ERR"%s(%d):%s can't allocate transmit buffer\n", - __FILE__,__LINE__,info->device_name); + __FILE__, __LINE__, info->device_name); return -ENOMEM; } } @@ -1288,15 +1295,15 @@ static int startup(MGSLPC_INFO * info, struct tty_struct *tty) retval = claim_resources(info); /* perform existence check and diagnostics */ - if ( !retval ) + if (!retval) retval = adapter_test(info); - if ( retval ) { - if (capable(CAP_SYS_ADMIN) && tty) + if (retval) { + if (capable(CAP_SYS_ADMIN) && tty) set_bit(TTY_IO_ERROR, &tty->flags); release_resources(info); - return retval; - } + return retval; + } /* program hardware for current parameters */ mgslpc_change_params(info, tty); @@ -1320,7 +1327,7 @@ static void shutdown(MGSLPC_INFO * info, struct tty_struct *tty) if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):mgslpc_shutdown(%s)\n", - __FILE__,__LINE__, info->device_name ); + __FILE__, __LINE__, info->device_name); /* clear status wait queue because status changes */ /* can't happen after shutting down the hardware */ @@ -1334,7 +1341,7 @@ static void shutdown(MGSLPC_INFO * info, struct tty_struct *tty) info->tx_buf = NULL; } - spin_lock_irqsave(&info->lock,flags); + spin_lock_irqsave(&info->lock, flags); rx_stop(info); tx_stop(info); @@ -1342,12 +1349,12 @@ static void shutdown(MGSLPC_INFO * info, struct tty_struct *tty) /* TODO:disable interrupts instead of reset to preserve signal states */ reset_device(info); - if (!tty || tty->termios.c_cflag & HUPCL) { + if (!tty || tty->termios.c_cflag & HUPCL) { info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR); set_signals(info); } - spin_unlock_irqrestore(&info->lock,flags); + spin_unlock_irqrestore(&info->lock, flags); release_resources(info); @@ -1361,7 +1368,7 @@ static void mgslpc_program_hw(MGSLPC_INFO *info, struct tty_struct *tty) { unsigned long flags; - spin_lock_irqsave(&info->lock,flags); + spin_lock_irqsave(&info->lock, flags); rx_stop(info); tx_stop(info); @@ -1386,7 +1393,7 @@ static void mgslpc_program_hw(MGSLPC_INFO *info, struct tty_struct *tty) if (info->netcount || (tty && (tty->termios.c_cflag & CREAD))) rx_start(info); - spin_unlock_irqrestore(&info->lock,flags); + spin_unlock_irqrestore(&info->lock, flags); } /* Reconfigure adapter based on new parameters @@ -1401,13 +1408,13 @@ static void mgslpc_change_params(MGSLPC_INFO *info, struct tty_struct *tty) if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):mgslpc_change_params(%s)\n", - __FILE__,__LINE__, info->device_name ); + __FILE__, __LINE__, info->device_name); cflag = tty->termios.c_cflag; /* if B0 rate (hangup) specified then negate RTS and DTR */ /* otherwise assert RTS and DTR */ - if (cflag & CBAUD) + if (cflag & CBAUD) info->serial_signals |= SerialSignal_RTS | SerialSignal_DTR; else info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR); @@ -1453,7 +1460,7 @@ static void mgslpc_change_params(MGSLPC_INFO *info, struct tty_struct *tty) info->params.data_rate = tty_get_baud_rate(tty); } - if ( info->params.data_rate ) { + if (info->params.data_rate) { info->timeout = (32*HZ*bits_per_char) / info->params.data_rate; } @@ -1488,8 +1495,8 @@ static int mgslpc_put_char(struct tty_struct *tty, unsigned char ch) unsigned long flags; if (debug_level >= DEBUG_LEVEL_INFO) { - printk( "%s(%d):mgslpc_put_char(%d) on %s\n", - __FILE__,__LINE__,ch,info->device_name); + printk("%s(%d):mgslpc_put_char(%d) on %s\n", + __FILE__, __LINE__, ch, info->device_name); } if (mgslpc_paranoia_check(info, tty->name, "mgslpc_put_char")) @@ -1498,7 +1505,7 @@ static int mgslpc_put_char(struct tty_struct *tty, unsigned char ch) if (!info->tx_buf) return 0; - spin_lock_irqsave(&info->lock,flags); + spin_lock_irqsave(&info->lock, flags); if (info->params.mode == MGSL_MODE_ASYNC || !info->tx_active) { if (info->tx_count < TXBUFSIZE - 1) { @@ -1508,7 +1515,7 @@ static int mgslpc_put_char(struct tty_struct *tty, unsigned char ch) } } - spin_unlock_irqrestore(&info->lock,flags); + spin_unlock_irqrestore(&info->lock, flags); return 1; } @@ -1521,8 +1528,8 @@ static void mgslpc_flush_chars(struct tty_struct *tty) unsigned long flags; if (debug_level >= DEBUG_LEVEL_INFO) - printk( "%s(%d):mgslpc_flush_chars() entry on %s tx_count=%d\n", - __FILE__,__LINE__,info->device_name,info->tx_count); + printk("%s(%d):mgslpc_flush_chars() entry on %s tx_count=%d\n", + __FILE__, __LINE__, info->device_name, info->tx_count); if (mgslpc_paranoia_check(info, tty->name, "mgslpc_flush_chars")) return; @@ -1532,13 +1539,13 @@ static void mgslpc_flush_chars(struct tty_struct *tty) return; if (debug_level >= DEBUG_LEVEL_INFO) - printk( "%s(%d):mgslpc_flush_chars() entry on %s starting transmitter\n", - __FILE__,__LINE__,info->device_name); + printk("%s(%d):mgslpc_flush_chars() entry on %s starting transmitter\n", + __FILE__, __LINE__, info->device_name); - spin_lock_irqsave(&info->lock,flags); + spin_lock_irqsave(&info->lock, flags); if (!info->tx_active) - tx_start(info, tty); - spin_unlock_irqrestore(&info->lock,flags); + tx_start(info, tty); + spin_unlock_irqrestore(&info->lock, flags); } /* Send a block of data @@ -1559,8 +1566,8 @@ static int mgslpc_write(struct tty_struct * tty, unsigned long flags; if (debug_level >= DEBUG_LEVEL_INFO) - printk( "%s(%d):mgslpc_write(%s) count=%d\n", - __FILE__,__LINE__,info->device_name,count); + printk("%s(%d):mgslpc_write(%s) count=%d\n", + __FILE__, __LINE__, info->device_name, count); if (mgslpc_paranoia_check(info, tty->name, "mgslpc_write") || !info->tx_buf) @@ -1586,26 +1593,26 @@ static int mgslpc_write(struct tty_struct * tty, memcpy(info->tx_buf + info->tx_put, buf, c); - spin_lock_irqsave(&info->lock,flags); + spin_lock_irqsave(&info->lock, flags); info->tx_put = (info->tx_put + c) & (TXBUFSIZE-1); info->tx_count += c; - spin_unlock_irqrestore(&info->lock,flags); + spin_unlock_irqrestore(&info->lock, flags); buf += c; count -= c; ret += c; } start: - if (info->tx_count && !tty->stopped && !tty->hw_stopped) { - spin_lock_irqsave(&info->lock,flags); + if (info->tx_count && !tty->stopped && !tty->hw_stopped) { + spin_lock_irqsave(&info->lock, flags); if (!info->tx_active) - tx_start(info, tty); - spin_unlock_irqrestore(&info->lock,flags); - } + tx_start(info, tty); + spin_unlock_irqrestore(&info->lock, flags); + } cleanup: if (debug_level >= DEBUG_LEVEL_INFO) - printk( "%s(%d):mgslpc_write(%s) returning=%d\n", - __FILE__,__LINE__,info->device_name,ret); + printk("%s(%d):mgslpc_write(%s) returning=%d\n", + __FILE__, __LINE__, info->device_name, ret); return ret; } @@ -1633,7 +1640,7 @@ static int mgslpc_write_room(struct tty_struct *tty) if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):mgslpc_write_room(%s)=%d\n", - __FILE__,__LINE__, info->device_name, ret); + __FILE__, __LINE__, info->device_name, ret); return ret; } @@ -1646,7 +1653,7 @@ static int mgslpc_chars_in_buffer(struct tty_struct *tty) if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):mgslpc_chars_in_buffer(%s)\n", - __FILE__,__LINE__, info->device_name ); + __FILE__, __LINE__, info->device_name); if (mgslpc_paranoia_check(info, tty->name, "mgslpc_chars_in_buffer")) return 0; @@ -1658,7 +1665,7 @@ static int mgslpc_chars_in_buffer(struct tty_struct *tty) if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):mgslpc_chars_in_buffer(%s)=%d\n", - __FILE__,__LINE__, info->device_name, rc); + __FILE__, __LINE__, info->device_name, rc); return rc; } @@ -1672,15 +1679,15 @@ static void mgslpc_flush_buffer(struct tty_struct *tty) if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):mgslpc_flush_buffer(%s) entry\n", - __FILE__,__LINE__, info->device_name ); + __FILE__, __LINE__, info->device_name); if (mgslpc_paranoia_check(info, tty->name, "mgslpc_flush_buffer")) return; - spin_lock_irqsave(&info->lock,flags); + spin_lock_irqsave(&info->lock, flags); info->tx_count = info->tx_put = info->tx_get = 0; del_timer(&info->tx_timer); - spin_unlock_irqrestore(&info->lock,flags); + spin_unlock_irqrestore(&info->lock, flags); wake_up_interruptible(&tty->write_wait); tty_wakeup(tty); @@ -1695,17 +1702,17 @@ static void mgslpc_send_xchar(struct tty_struct *tty, char ch) if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):mgslpc_send_xchar(%s,%d)\n", - __FILE__,__LINE__, info->device_name, ch ); + __FILE__, __LINE__, info->device_name, ch); if (mgslpc_paranoia_check(info, tty->name, "mgslpc_send_xchar")) return; info->x_char = ch; if (ch) { - spin_lock_irqsave(&info->lock,flags); + spin_lock_irqsave(&info->lock, flags); if (!info->tx_enabled) - tx_start(info, tty); - spin_unlock_irqrestore(&info->lock,flags); + tx_start(info, tty); + spin_unlock_irqrestore(&info->lock, flags); } } @@ -1718,7 +1725,7 @@ static void mgslpc_throttle(struct tty_struct * tty) if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):mgslpc_throttle(%s) entry\n", - __FILE__,__LINE__, info->device_name ); + __FILE__, __LINE__, info->device_name); if (mgslpc_paranoia_check(info, tty->name, "mgslpc_throttle")) return; @@ -1726,11 +1733,11 @@ static void mgslpc_throttle(struct tty_struct * tty) if (I_IXOFF(tty)) mgslpc_send_xchar(tty, STOP_CHAR(tty)); - if (tty->termios.c_cflag & CRTSCTS) { - spin_lock_irqsave(&info->lock,flags); + if (tty->termios.c_cflag & CRTSCTS) { + spin_lock_irqsave(&info->lock, flags); info->serial_signals &= ~SerialSignal_RTS; - set_signals(info); - spin_unlock_irqrestore(&info->lock,flags); + set_signals(info); + spin_unlock_irqrestore(&info->lock, flags); } } @@ -1743,7 +1750,7 @@ static void mgslpc_unthrottle(struct tty_struct * tty) if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):mgslpc_unthrottle(%s) entry\n", - __FILE__,__LINE__, info->device_name ); + __FILE__, __LINE__, info->device_name); if (mgslpc_paranoia_check(info, tty->name, "mgslpc_unthrottle")) return; @@ -1755,11 +1762,11 @@ static void mgslpc_unthrottle(struct tty_struct * tty) mgslpc_send_xchar(tty, START_CHAR(tty)); } - if (tty->termios.c_cflag & CRTSCTS) { - spin_lock_irqsave(&info->lock,flags); + if (tty->termios.c_cflag & CRTSCTS) { + spin_lock_irqsave(&info->lock, flags); info->serial_signals |= SerialSignal_RTS; - set_signals(info); - spin_unlock_irqrestore(&info->lock,flags); + set_signals(info); + spin_unlock_irqrestore(&info->lock, flags); } } @@ -1797,33 +1804,33 @@ static int get_params(MGSLPC_INFO * info, MGSL_PARAMS __user *user_params) * * Arguments: * - * info pointer to device instance data - * new_params user buffer containing new serial params + * info pointer to device instance data + * new_params user buffer containing new serial params * * Returns: 0 if success, otherwise error code */ static int set_params(MGSLPC_INFO * info, MGSL_PARAMS __user *new_params, struct tty_struct *tty) { - unsigned long flags; + unsigned long flags; MGSL_PARAMS tmp_params; int err; if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):set_params %s\n", __FILE__,__LINE__, - info->device_name ); + info->device_name); COPY_FROM_USER(err,&tmp_params, new_params, sizeof(MGSL_PARAMS)); if (err) { - if ( debug_level >= DEBUG_LEVEL_INFO ) - printk( "%s(%d):set_params(%s) user buffer copy failed\n", - __FILE__,__LINE__,info->device_name); + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):set_params(%s) user buffer copy failed\n", + __FILE__, __LINE__, info->device_name); return -EFAULT; } - spin_lock_irqsave(&info->lock,flags); + spin_lock_irqsave(&info->lock, flags); memcpy(&info->params,&tmp_params,sizeof(MGSL_PARAMS)); - spin_unlock_irqrestore(&info->lock,flags); + spin_unlock_irqrestore(&info->lock, flags); - mgslpc_change_params(info, tty); + mgslpc_change_params(info, tty); return 0; } @@ -1841,13 +1848,13 @@ static int get_txidle(MGSLPC_INFO * info, int __user *idle_mode) static int set_txidle(MGSLPC_INFO * info, int idle_mode) { - unsigned long flags; + unsigned long flags; if (debug_level >= DEBUG_LEVEL_INFO) printk("set_txidle(%s,%d)\n", info->device_name, idle_mode); - spin_lock_irqsave(&info->lock,flags); + spin_lock_irqsave(&info->lock, flags); info->idle_mode = idle_mode; tx_set_idle(info); - spin_unlock_irqrestore(&info->lock,flags); + spin_unlock_irqrestore(&info->lock, flags); return 0; } @@ -1864,11 +1871,11 @@ static int get_interface(MGSLPC_INFO * info, int __user *if_mode) static int set_interface(MGSLPC_INFO * info, int if_mode) { - unsigned long flags; + unsigned long flags; unsigned char val; if (debug_level >= DEBUG_LEVEL_INFO) printk("set_interface(%s,%d)\n", info->device_name, if_mode); - spin_lock_irqsave(&info->lock,flags); + spin_lock_irqsave(&info->lock, flags); info->if_mode = if_mode; val = read_reg(info, PVR) & 0x0f; @@ -1880,18 +1887,18 @@ static int set_interface(MGSLPC_INFO * info, int if_mode) } write_reg(info, PVR, val); - spin_unlock_irqrestore(&info->lock,flags); + spin_unlock_irqrestore(&info->lock, flags); return 0; } static int set_txenable(MGSLPC_INFO * info, int enable, struct tty_struct *tty) { - unsigned long flags; + unsigned long flags; if (debug_level >= DEBUG_LEVEL_INFO) printk("set_txenable(%s,%d)\n", info->device_name, enable); - spin_lock_irqsave(&info->lock,flags); + spin_lock_irqsave(&info->lock, flags); if (enable) { if (!info->tx_enabled) tx_start(info, tty); @@ -1899,18 +1906,18 @@ static int set_txenable(MGSLPC_INFO * info, int enable, struct tty_struct *tty) if (info->tx_enabled) tx_stop(info); } - spin_unlock_irqrestore(&info->lock,flags); + spin_unlock_irqrestore(&info->lock, flags); return 0; } static int tx_abort(MGSLPC_INFO * info) { - unsigned long flags; + unsigned long flags; if (debug_level >= DEBUG_LEVEL_INFO) printk("tx_abort(%s)\n", info->device_name); - spin_lock_irqsave(&info->lock,flags); + spin_lock_irqsave(&info->lock, flags); if (info->tx_active && info->tx_count && info->params.mode == MGSL_MODE_HDLC) { /* clear data count so FIFO is not filled on next IRQ. @@ -1919,18 +1926,18 @@ static int tx_abort(MGSLPC_INFO * info) info->tx_count = info->tx_put = info->tx_get = 0; info->tx_aborting = true; } - spin_unlock_irqrestore(&info->lock,flags); + spin_unlock_irqrestore(&info->lock, flags); return 0; } static int set_rxenable(MGSLPC_INFO * info, int enable) { - unsigned long flags; + unsigned long flags; if (debug_level >= DEBUG_LEVEL_INFO) printk("set_rxenable(%s,%d)\n", info->device_name, enable); - spin_lock_irqsave(&info->lock,flags); + spin_lock_irqsave(&info->lock, flags); if (enable) { if (!info->rx_enabled) rx_start(info); @@ -1938,21 +1945,21 @@ static int set_rxenable(MGSLPC_INFO * info, int enable) if (info->rx_enabled) rx_stop(info); } - spin_unlock_irqrestore(&info->lock,flags); + spin_unlock_irqrestore(&info->lock, flags); return 0; } /* wait for specified event to occur * - * Arguments: info pointer to device instance data - * mask pointer to bitmask of events to wait for - * Return Value: 0 if successful and bit mask updated with + * Arguments: info pointer to device instance data + * mask pointer to bitmask of events to wait for + * Return Value: 0 if successful and bit mask updated with * of events triggerred, - * otherwise error code + * otherwise error code */ static int wait_events(MGSLPC_INFO * info, int __user *mask_ptr) { - unsigned long flags; + unsigned long flags; int s; int rc=0; struct mgsl_icount cprev, cnow; @@ -1968,18 +1975,18 @@ static int wait_events(MGSLPC_INFO * info, int __user *mask_ptr) if (debug_level >= DEBUG_LEVEL_INFO) printk("wait_events(%s,%d)\n", info->device_name, mask); - spin_lock_irqsave(&info->lock,flags); + spin_lock_irqsave(&info->lock, flags); /* return immediately if state matches requested events */ get_signals(info); s = info->serial_signals; events = mask & ( ((s & SerialSignal_DSR) ? MgslEvent_DsrActive:MgslEvent_DsrInactive) + - ((s & SerialSignal_DCD) ? MgslEvent_DcdActive:MgslEvent_DcdInactive) + + ((s & SerialSignal_DCD) ? MgslEvent_DcdActive:MgslEvent_DcdInactive) + ((s & SerialSignal_CTS) ? MgslEvent_CtsActive:MgslEvent_CtsInactive) + ((s & SerialSignal_RI) ? MgslEvent_RiActive :MgslEvent_RiInactive) ); if (events) { - spin_unlock_irqrestore(&info->lock,flags); + spin_unlock_irqrestore(&info->lock, flags); goto exit; } @@ -1994,7 +2001,7 @@ static int wait_events(MGSLPC_INFO * info, int __user *mask_ptr) set_current_state(TASK_INTERRUPTIBLE); add_wait_queue(&info->event_wait_q, &wait); - spin_unlock_irqrestore(&info->lock,flags); + spin_unlock_irqrestore(&info->lock, flags); for(;;) { @@ -2005,11 +2012,11 @@ static int wait_events(MGSLPC_INFO * info, int __user *mask_ptr) } /* get current irq counts */ - spin_lock_irqsave(&info->lock,flags); + spin_lock_irqsave(&info->lock, flags); cnow = info->icount; newsigs = info->input_signal_events; set_current_state(TASK_INTERRUPTIBLE); - spin_unlock_irqrestore(&info->lock,flags); + spin_unlock_irqrestore(&info->lock, flags); /* if no change, wait aborted for some reason */ if (newsigs.dsr_up == oldsigs.dsr_up && @@ -2048,10 +2055,10 @@ static int wait_events(MGSLPC_INFO * info, int __user *mask_ptr) set_current_state(TASK_RUNNING); if (mask & MgslEvent_ExitHuntMode) { - spin_lock_irqsave(&info->lock,flags); + spin_lock_irqsave(&info->lock, flags); if (!waitqueue_active(&info->event_wait_q)) irq_disable(info, CHA, IRQ_EXITHUNT); - spin_unlock_irqrestore(&info->lock,flags); + spin_unlock_irqrestore(&info->lock, flags); } exit: if (rc == 0) @@ -2061,17 +2068,17 @@ exit: static int modem_input_wait(MGSLPC_INFO *info,int arg) { - unsigned long flags; + unsigned long flags; int rc; struct mgsl_icount cprev, cnow; DECLARE_WAITQUEUE(wait, current); /* save current irq counts */ - spin_lock_irqsave(&info->lock,flags); + spin_lock_irqsave(&info->lock, flags); cprev = info->icount; add_wait_queue(&info->status_event_wait_q, &wait); set_current_state(TASK_INTERRUPTIBLE); - spin_unlock_irqrestore(&info->lock,flags); + spin_unlock_irqrestore(&info->lock, flags); for(;;) { schedule(); @@ -2081,10 +2088,10 @@ static int modem_input_wait(MGSLPC_INFO *info,int arg) } /* get new irq counts */ - spin_lock_irqsave(&info->lock,flags); + spin_lock_irqsave(&info->lock, flags); cnow = info->icount; set_current_state(TASK_INTERRUPTIBLE); - spin_unlock_irqrestore(&info->lock,flags); + spin_unlock_irqrestore(&info->lock, flags); /* if no change, wait aborted for some reason */ if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr && @@ -2115,11 +2122,11 @@ static int tiocmget(struct tty_struct *tty) { MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data; unsigned int result; - unsigned long flags; + unsigned long flags; - spin_lock_irqsave(&info->lock,flags); - get_signals(info); - spin_unlock_irqrestore(&info->lock,flags); + spin_lock_irqsave(&info->lock, flags); + get_signals(info); + spin_unlock_irqrestore(&info->lock, flags); result = ((info->serial_signals & SerialSignal_RTS) ? TIOCM_RTS:0) + ((info->serial_signals & SerialSignal_DTR) ? TIOCM_DTR:0) + @@ -2130,7 +2137,7 @@ static int tiocmget(struct tty_struct *tty) if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):%s tiocmget() value=%08X\n", - __FILE__,__LINE__, info->device_name, result ); + __FILE__, __LINE__, info->device_name, result); return result; } @@ -2140,11 +2147,11 @@ static int tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear) { MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data; - unsigned long flags; + unsigned long flags; if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):%s tiocmset(%x,%x)\n", - __FILE__,__LINE__,info->device_name, set, clear); + __FILE__, __LINE__, info->device_name, set, clear); if (set & TIOCM_RTS) info->serial_signals |= SerialSignal_RTS; @@ -2155,9 +2162,9 @@ static int tiocmset(struct tty_struct *tty, if (clear & TIOCM_DTR) info->serial_signals &= ~SerialSignal_DTR; - spin_lock_irqsave(&info->lock,flags); - set_signals(info); - spin_unlock_irqrestore(&info->lock,flags); + spin_lock_irqsave(&info->lock, flags); + set_signals(info); + spin_unlock_irqrestore(&info->lock, flags); return 0; } @@ -2174,17 +2181,17 @@ static int mgslpc_break(struct tty_struct *tty, int break_state) if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):mgslpc_break(%s,%d)\n", - __FILE__,__LINE__, info->device_name, break_state); + __FILE__, __LINE__, info->device_name, break_state); if (mgslpc_paranoia_check(info, tty->name, "mgslpc_break")) return -EINVAL; - spin_lock_irqsave(&info->lock,flags); - if (break_state == -1) + spin_lock_irqsave(&info->lock, flags); + if (break_state == -1) set_reg_bits(info, CHA+DAFO, BIT6); else clear_reg_bits(info, CHA+DAFO, BIT6); - spin_unlock_irqrestore(&info->lock,flags); + spin_unlock_irqrestore(&info->lock, flags); return 0; } @@ -2195,9 +2202,9 @@ static int mgslpc_get_icount(struct tty_struct *tty, struct mgsl_icount cnow; /* kernel counter temps */ unsigned long flags; - spin_lock_irqsave(&info->lock,flags); + spin_lock_irqsave(&info->lock, flags); cnow = info->icount; - spin_unlock_irqrestore(&info->lock,flags); + spin_unlock_irqrestore(&info->lock, flags); icount->cts = cnow.cts; icount->dsr = cnow.dsr; @@ -2218,9 +2225,9 @@ static int mgslpc_get_icount(struct tty_struct *tty, * * Arguments: * - * tty pointer to tty instance data - * cmd IOCTL command code - * arg command argument/context + * tty pointer to tty instance data + * cmd IOCTL command code + * arg command argument/context * * Return Value: 0 if success, otherwise error code */ @@ -2231,8 +2238,8 @@ static int mgslpc_ioctl(struct tty_struct *tty, void __user *argp = (void __user *)arg; if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):mgslpc_ioctl %s cmd=%08X\n", __FILE__,__LINE__, - info->device_name, cmd ); + printk("%s(%d):mgslpc_ioctl %s cmd=%08X\n", __FILE__, __LINE__, + info->device_name, cmd); if (mgslpc_paranoia_check(info, tty->name, "mgslpc_ioctl")) return -ENODEV; @@ -2278,8 +2285,8 @@ static int mgslpc_ioctl(struct tty_struct *tty, * * Arguments: * - * tty pointer to tty structure - * termios pointer to buffer to hold returned old termios + * tty pointer to tty structure + * termios pointer to buffer to hold returned old termios */ static void mgslpc_set_termios(struct tty_struct *tty, struct ktermios *old_termios) { @@ -2287,8 +2294,8 @@ static void mgslpc_set_termios(struct tty_struct *tty, struct ktermios *old_term unsigned long flags; if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):mgslpc_set_termios %s\n", __FILE__,__LINE__, - tty->driver->name ); + printk("%s(%d):mgslpc_set_termios %s\n", __FILE__, __LINE__, + tty->driver->name); /* just return if nothing has changed */ if ((tty->termios.c_cflag == old_termios->c_cflag) @@ -2302,22 +2309,22 @@ static void mgslpc_set_termios(struct tty_struct *tty, struct ktermios *old_term if (old_termios->c_cflag & CBAUD && !(tty->termios.c_cflag & CBAUD)) { info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR); - spin_lock_irqsave(&info->lock,flags); - set_signals(info); - spin_unlock_irqrestore(&info->lock,flags); + spin_lock_irqsave(&info->lock, flags); + set_signals(info); + spin_unlock_irqrestore(&info->lock, flags); } /* Handle transition away from B0 status */ if (!(old_termios->c_cflag & CBAUD) && tty->termios.c_cflag & CBAUD) { info->serial_signals |= SerialSignal_DTR; - if (!(tty->termios.c_cflag & CRTSCTS) || - !test_bit(TTY_THROTTLED, &tty->flags)) { + if (!(tty->termios.c_cflag & CRTSCTS) || + !test_bit(TTY_THROTTLED, &tty->flags)) { info->serial_signals |= SerialSignal_RTS; - } - spin_lock_irqsave(&info->lock,flags); - set_signals(info); - spin_unlock_irqrestore(&info->lock,flags); + } + spin_lock_irqsave(&info->lock, flags); + set_signals(info); + spin_unlock_irqrestore(&info->lock, flags); } /* Handle turning off CRTSCTS */ @@ -2338,15 +2345,15 @@ static void mgslpc_close(struct tty_struct *tty, struct file * filp) if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):mgslpc_close(%s) entry, count=%d\n", - __FILE__,__LINE__, info->device_name, port->count); + __FILE__, __LINE__, info->device_name, port->count); WARN_ON(!port->count); if (tty_port_close_start(port, tty, filp) == 0) goto cleanup; - if (port->flags & ASYNC_INITIALIZED) - mgslpc_wait_until_sent(tty, info->timeout); + if (port->flags & ASYNC_INITIALIZED) + mgslpc_wait_until_sent(tty, info->timeout); mgslpc_flush_buffer(tty); @@ -2357,7 +2364,7 @@ static void mgslpc_close(struct tty_struct *tty, struct file * filp) tty_port_tty_set(port, NULL); cleanup: if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s(%d):mgslpc_close(%s) exit, count=%d\n", __FILE__,__LINE__, + printk("%s(%d):mgslpc_close(%s) exit, count=%d\n", __FILE__, __LINE__, tty->driver->name, port->count); } @@ -2368,12 +2375,12 @@ static void mgslpc_wait_until_sent(struct tty_struct *tty, int timeout) MGSLPC_INFO * info = (MGSLPC_INFO *)tty->driver_data; unsigned long orig_jiffies, char_time; - if (!info ) + if (!info) return; if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):mgslpc_wait_until_sent(%s) entry\n", - __FILE__,__LINE__, info->device_name ); + __FILE__, __LINE__, info->device_name); if (mgslpc_paranoia_check(info, tty->name, "mgslpc_wait_until_sent")) return; @@ -2389,8 +2396,8 @@ static void mgslpc_wait_until_sent(struct tty_struct *tty, int timeout) * Note: use tight timings here to satisfy the NIST-PCTS. */ - if ( info->params.data_rate ) { - char_time = info->timeout/(32 * 5); + if (info->params.data_rate) { + char_time = info->timeout/(32 * 5); if (!char_time) char_time++; } else @@ -2421,7 +2428,7 @@ static void mgslpc_wait_until_sent(struct tty_struct *tty, int timeout) exit: if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):mgslpc_wait_until_sent(%s) exit\n", - __FILE__,__LINE__, info->device_name ); + __FILE__, __LINE__, info->device_name); } /* Called by tty_hangup() when a hangup is signaled. @@ -2433,7 +2440,7 @@ static void mgslpc_hangup(struct tty_struct *tty) if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):mgslpc_hangup(%s)\n", - __FILE__,__LINE__, info->device_name ); + __FILE__, __LINE__, info->device_name); if (mgslpc_paranoia_check(info, tty->name, "mgslpc_hangup")) return; @@ -2448,9 +2455,9 @@ static int carrier_raised(struct tty_port *port) MGSLPC_INFO *info = container_of(port, MGSLPC_INFO, port); unsigned long flags; - spin_lock_irqsave(&info->lock,flags); - get_signals(info); - spin_unlock_irqrestore(&info->lock,flags); + spin_lock_irqsave(&info->lock, flags); + get_signals(info); + spin_unlock_irqrestore(&info->lock, flags); if (info->serial_signals & SerialSignal_DCD) return 1; @@ -2462,13 +2469,13 @@ static void dtr_rts(struct tty_port *port, int onoff) MGSLPC_INFO *info = container_of(port, MGSLPC_INFO, port); unsigned long flags; - spin_lock_irqsave(&info->lock,flags); + spin_lock_irqsave(&info->lock, flags); if (onoff) info->serial_signals |= SerialSignal_RTS | SerialSignal_DTR; else info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR); set_signals(info); - spin_unlock_irqrestore(&info->lock,flags); + spin_unlock_irqrestore(&info->lock, flags); } @@ -2476,14 +2483,14 @@ static int mgslpc_open(struct tty_struct *tty, struct file * filp) { MGSLPC_INFO *info; struct tty_port *port; - int retval, line; - unsigned long flags; + int retval, line; + unsigned long flags; /* verify range of specified line number */ line = tty->index; if (line >= mgslpc_device_count) { printk("%s(%d):mgslpc_open with invalid line #%d.\n", - __FILE__,__LINE__,line); + __FILE__, __LINE__, line); return -ENODEV; } @@ -2500,7 +2507,7 @@ static int mgslpc_open(struct tty_struct *tty, struct file * filp) if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):mgslpc_open(%s), old ref count = %d\n", - __FILE__,__LINE__,tty->driver->name, port->count); + __FILE__, __LINE__, tty->driver->name, port->count); /* If port is closing, signal caller to try again */ if (tty_hung_up_p(filp) || port->flags & ASYNC_CLOSING){ @@ -2535,13 +2542,13 @@ static int mgslpc_open(struct tty_struct *tty, struct file * filp) if (retval) { if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):block_til_ready(%s) returned %d\n", - __FILE__,__LINE__, info->device_name, retval); + __FILE__, __LINE__, info->device_name, retval); goto cleanup; } if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):mgslpc_open(%s) success\n", - __FILE__,__LINE__, info->device_name); + __FILE__, __LINE__, info->device_name); retval = 0; cleanup: @@ -2561,9 +2568,9 @@ static inline void line_info(struct seq_file *m, MGSLPC_INFO *info) info->device_name, info->io_base, info->irq_level); /* output current serial signal states */ - spin_lock_irqsave(&info->lock,flags); - get_signals(info); - spin_unlock_irqrestore(&info->lock,flags); + spin_lock_irqsave(&info->lock, flags); + get_signals(info); + spin_unlock_irqrestore(&info->lock, flags); stat_buf[0] = 0; stat_buf[1] = 0; @@ -2625,7 +2632,7 @@ static int mgslpc_proc_show(struct seq_file *m, void *v) seq_printf(m, "synclink driver:%s\n", driver_version); info = mgslpc_device_list; - while( info ) { + while (info) { line_info(m, info); info = info->next_device; } @@ -2686,8 +2693,8 @@ static void rx_free_buffers(MGSLPC_INFO *info) static int claim_resources(MGSLPC_INFO *info) { - if (rx_alloc_buffers(info) < 0 ) { - printk( "Can't allocate rx buffer %s\n", info->device_name); + if (rx_alloc_buffers(info) < 0) { + printk("Can't allocate rx buffer %s\n", info->device_name); release_resources(info); return -ENODEV; } @@ -2706,8 +2713,12 @@ static void release_resources(MGSLPC_INFO *info) * * Arguments: info pointer to device instance data */ -static void mgslpc_add_device(MGSLPC_INFO *info) +static int mgslpc_add_device(MGSLPC_INFO *info) { + MGSLPC_INFO *current_dev = NULL; + struct device *tty_dev; + int ret; + info->next_device = NULL; info->line = mgslpc_device_count; sprintf(info->device_name,"ttySLP%d",info->line); @@ -2722,8 +2733,8 @@ static void mgslpc_add_device(MGSLPC_INFO *info) if (!mgslpc_device_list) mgslpc_device_list = info; else { - MGSLPC_INFO *current_dev = mgslpc_device_list; - while( current_dev->next_device ) + current_dev = mgslpc_device_list; + while (current_dev->next_device) current_dev = current_dev->next_device; current_dev->next_device = info; } @@ -2733,14 +2744,34 @@ static void mgslpc_add_device(MGSLPC_INFO *info) else if (info->max_frame_size > 65535) info->max_frame_size = 65535; - printk( "SyncLink PC Card %s:IO=%04X IRQ=%d\n", + printk("SyncLink PC Card %s:IO=%04X IRQ=%d\n", info->device_name, info->io_base, info->irq_level); #if SYNCLINK_GENERIC_HDLC - hdlcdev_init(info); + ret = hdlcdev_init(info); + if (ret != 0) + goto failed; #endif - tty_port_register_device(&info->port, serial_driver, info->line, + + tty_dev = tty_port_register_device(&info->port, serial_driver, info->line, &info->p_dev->dev); + if (IS_ERR(tty_dev)) { + ret = PTR_ERR(tty_dev); +#if SYNCLINK_GENERIC_HDLC + hdlcdev_exit(info); +#endif + goto failed; + } + + return 0; + +failed: + if (current_dev) + current_dev->next_device = NULL; + else + mgslpc_device_list = NULL; + mgslpc_device_count--; + return ret; } static void mgslpc_remove_device(MGSLPC_INFO *remove_info) @@ -3262,7 +3293,7 @@ static void rx_stop(MGSLPC_INFO *info) { if (debug_level >= DEBUG_LEVEL_ISR) printk("%s(%d):rx_stop(%s)\n", - __FILE__,__LINE__, info->device_name ); + __FILE__, __LINE__, info->device_name); /* MODE:03 RAC Receiver Active, 0=inactive */ clear_reg_bits(info, CHA + MODE, BIT3); @@ -3275,7 +3306,7 @@ static void rx_start(MGSLPC_INFO *info) { if (debug_level >= DEBUG_LEVEL_ISR) printk("%s(%d):rx_start(%s)\n", - __FILE__,__LINE__, info->device_name ); + __FILE__, __LINE__, info->device_name); rx_reset_buffers(info); info->rx_enabled = false; @@ -3291,7 +3322,7 @@ static void tx_start(MGSLPC_INFO *info, struct tty_struct *tty) { if (debug_level >= DEBUG_LEVEL_ISR) printk("%s(%d):tx_start(%s)\n", - __FILE__,__LINE__, info->device_name ); + __FILE__, __LINE__, info->device_name); if (info->tx_count) { /* If auto RTS enabled and RTS is inactive, then assert */ @@ -3329,7 +3360,7 @@ static void tx_stop(MGSLPC_INFO *info) { if (debug_level >= DEBUG_LEVEL_ISR) printk("%s(%d):tx_stop(%s)\n", - __FILE__,__LINE__, info->device_name ); + __FILE__, __LINE__, info->device_name); del_timer(&info->tx_timer); @@ -3681,7 +3712,7 @@ static bool rx_get_frame(MGSLPC_INFO *info, struct tty_struct *tty) if (debug_level >= DEBUG_LEVEL_BH) printk("%s(%d):rx_get_frame(%s) status=%04X size=%d\n", - __FILE__,__LINE__,info->device_name,status,framesize); + __FILE__, __LINE__, info->device_name, status, framesize); if (debug_level >= DEBUG_LEVEL_DATA) trace_block(info, buf->data, framesize, 0); @@ -3709,13 +3740,13 @@ static bool rx_get_frame(MGSLPC_INFO *info, struct tty_struct *tty) } } - spin_lock_irqsave(&info->lock,flags); + spin_lock_irqsave(&info->lock, flags); buf->status = buf->count = 0; info->rx_frame_count--; info->rx_get++; if (info->rx_get >= info->rx_buf_count) info->rx_get = 0; - spin_unlock_irqrestore(&info->lock,flags); + spin_unlock_irqrestore(&info->lock, flags); return true; } @@ -3729,7 +3760,7 @@ static bool register_test(MGSLPC_INFO *info) bool rc = true; unsigned long flags; - spin_lock_irqsave(&info->lock,flags); + spin_lock_irqsave(&info->lock, flags); reset_device(info); for (i = 0; i < count; i++) { @@ -3742,7 +3773,7 @@ static bool register_test(MGSLPC_INFO *info) } } - spin_unlock_irqrestore(&info->lock,flags); + spin_unlock_irqrestore(&info->lock, flags); return rc; } @@ -3751,7 +3782,7 @@ static bool irq_test(MGSLPC_INFO *info) unsigned long end_time; unsigned long flags; - spin_lock_irqsave(&info->lock,flags); + spin_lock_irqsave(&info->lock, flags); reset_device(info); info->testing_irq = true; @@ -3765,7 +3796,7 @@ static bool irq_test(MGSLPC_INFO *info) write_reg(info, CHA + TIMR, 0); /* 512 cycles */ issue_command(info, CHA, CMD_START_TIMER); - spin_unlock_irqrestore(&info->lock,flags); + spin_unlock_irqrestore(&info->lock, flags); end_time=100; while(end_time-- && !info->irq_occurred) { @@ -3774,9 +3805,9 @@ static bool irq_test(MGSLPC_INFO *info) info->testing_irq = false; - spin_lock_irqsave(&info->lock,flags); + spin_lock_irqsave(&info->lock, flags); reset_device(info); - spin_unlock_irqrestore(&info->lock,flags); + spin_unlock_irqrestore(&info->lock, flags); return info->irq_occurred; } @@ -3785,21 +3816,21 @@ static int adapter_test(MGSLPC_INFO *info) { if (!register_test(info)) { info->init_error = DiagStatus_AddressFailure; - printk( "%s(%d):Register test failure for device %s Addr=%04X\n", - __FILE__,__LINE__,info->device_name, (unsigned short)(info->io_base) ); + printk("%s(%d):Register test failure for device %s Addr=%04X\n", + __FILE__, __LINE__, info->device_name, (unsigned short)(info->io_base)); return -ENODEV; } if (!irq_test(info)) { info->init_error = DiagStatus_IrqFailure; - printk( "%s(%d):Interrupt test failure for device %s IRQ=%d\n", - __FILE__,__LINE__,info->device_name, (unsigned short)(info->irq_level) ); + printk("%s(%d):Interrupt test failure for device %s IRQ=%d\n", + __FILE__, __LINE__, info->device_name, (unsigned short)(info->irq_level)); return -ENODEV; } if (debug_level >= DEBUG_LEVEL_INFO) printk("%s(%d):device %s passed diagnostics\n", - __FILE__,__LINE__,info->device_name); + __FILE__, __LINE__, info->device_name); return 0; } @@ -3808,9 +3839,9 @@ static void trace_block(MGSLPC_INFO *info,const char* data, int count, int xmit) int i; int linecount; if (xmit) - printk("%s tx data:\n",info->device_name); + printk("%s tx data:\n", info->device_name); else - printk("%s rx data:\n",info->device_name); + printk("%s rx data:\n", info->device_name); while(count) { if (count > 16) @@ -3819,12 +3850,12 @@ static void trace_block(MGSLPC_INFO *info,const char* data, int count, int xmit) linecount = count; for(i=0;i<linecount;i++) - printk("%02X ",(unsigned char)data[i]); + printk("%02X ", (unsigned char)data[i]); for(;i<17;i++) printk(" "); for(i=0;i<linecount;i++) { if (data[i]>=040 && data[i]<=0176) - printk("%c",data[i]); + printk("%c", data[i]); else printk("."); } @@ -3843,18 +3874,18 @@ static void tx_timeout(unsigned long context) MGSLPC_INFO *info = (MGSLPC_INFO*)context; unsigned long flags; - if ( debug_level >= DEBUG_LEVEL_INFO ) - printk( "%s(%d):tx_timeout(%s)\n", - __FILE__,__LINE__,info->device_name); - if(info->tx_active && - info->params.mode == MGSL_MODE_HDLC) { + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):tx_timeout(%s)\n", + __FILE__, __LINE__, info->device_name); + if (info->tx_active && + info->params.mode == MGSL_MODE_HDLC) { info->icount.txtimeout++; } - spin_lock_irqsave(&info->lock,flags); + spin_lock_irqsave(&info->lock, flags); info->tx_active = false; info->tx_count = info->tx_put = info->tx_get = 0; - spin_unlock_irqrestore(&info->lock,flags); + spin_unlock_irqrestore(&info->lock, flags); #if SYNCLINK_GENERIC_HDLC if (info->netcount) @@ -3936,7 +3967,7 @@ static netdev_tx_t hdlcdev_xmit(struct sk_buff *skb, unsigned long flags; if (debug_level >= DEBUG_LEVEL_INFO) - printk(KERN_INFO "%s:hdlc_xmit(%s)\n",__FILE__,dev->name); + printk(KERN_INFO "%s:hdlc_xmit(%s)\n", __FILE__, dev->name); /* stop sending until this frame completes */ netif_stop_queue(dev); @@ -3957,13 +3988,13 @@ static netdev_tx_t hdlcdev_xmit(struct sk_buff *skb, dev->trans_start = jiffies; /* start hardware transmitter if necessary */ - spin_lock_irqsave(&info->lock,flags); + spin_lock_irqsave(&info->lock, flags); if (!info->tx_active) { struct tty_struct *tty = tty_port_tty_get(&info->port); - tx_start(info, tty); - tty_kref_put(tty); + tx_start(info, tty); + tty_kref_put(tty); } - spin_unlock_irqrestore(&info->lock,flags); + spin_unlock_irqrestore(&info->lock, flags); return NETDEV_TX_OK; } @@ -3984,10 +4015,11 @@ static int hdlcdev_open(struct net_device *dev) unsigned long flags; if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s:hdlcdev_open(%s)\n",__FILE__,dev->name); + printk("%s:hdlcdev_open(%s)\n", __FILE__, dev->name); /* generic HDLC layer open processing */ - if ((rc = hdlc_open(dev))) + rc = hdlc_open(dev); + if (rc != 0) return rc; /* arbitrate between network and tty opens */ @@ -4002,7 +4034,8 @@ static int hdlcdev_open(struct net_device *dev) tty = tty_port_tty_get(&info->port); /* claim resources and init adapter */ - if ((rc = startup(info, tty)) != 0) { + rc = startup(info, tty); + if (rc != 0) { tty_kref_put(tty); spin_lock_irqsave(&info->netlock, flags); info->netcount=0; @@ -4044,7 +4077,7 @@ static int hdlcdev_close(struct net_device *dev) unsigned long flags; if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s:hdlcdev_close(%s)\n",__FILE__,dev->name); + printk("%s:hdlcdev_close(%s)\n", __FILE__, dev->name); netif_stop_queue(dev); @@ -4078,7 +4111,7 @@ static int hdlcdev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) unsigned int flags; if (debug_level >= DEBUG_LEVEL_INFO) - printk("%s:hdlcdev_ioctl(%s)\n",__FILE__,dev->name); + printk("%s:hdlcdev_ioctl(%s)\n", __FILE__, dev->name); /* return error if TTY interface open */ if (info->port.count) @@ -4179,14 +4212,14 @@ static void hdlcdev_tx_timeout(struct net_device *dev) unsigned long flags; if (debug_level >= DEBUG_LEVEL_INFO) - printk("hdlcdev_tx_timeout(%s)\n",dev->name); + printk("hdlcdev_tx_timeout(%s)\n", dev->name); dev->stats.tx_errors++; dev->stats.tx_aborted_errors++; - spin_lock_irqsave(&info->lock,flags); + spin_lock_irqsave(&info->lock, flags); tx_stop(info); - spin_unlock_irqrestore(&info->lock,flags); + spin_unlock_irqrestore(&info->lock, flags); netif_wake_queue(dev); } @@ -4217,7 +4250,7 @@ static void hdlcdev_rx(MGSLPC_INFO *info, char *buf, int size) struct net_device *dev = info->netdev; if (debug_level >= DEBUG_LEVEL_INFO) - printk("hdlcdev_rx(%s)\n",dev->name); + printk("hdlcdev_rx(%s)\n", dev->name); if (skb == NULL) { printk(KERN_NOTICE "%s: can't alloc skb, dropping packet\n", dev->name); @@ -4260,8 +4293,9 @@ static int hdlcdev_init(MGSLPC_INFO *info) /* allocate and initialize network and HDLC layer objects */ - if (!(dev = alloc_hdlcdev(info))) { - printk(KERN_ERR "%s:hdlc device allocation failure\n",__FILE__); + dev = alloc_hdlcdev(info); + if (dev == NULL) { + printk(KERN_ERR "%s:hdlc device allocation failure\n", __FILE__); return -ENOMEM; } @@ -4280,8 +4314,9 @@ static int hdlcdev_init(MGSLPC_INFO *info) hdlc->xmit = hdlcdev_xmit; /* register objects with HDLC layer */ - if ((rc = register_hdlc_device(dev))) { - printk(KERN_WARNING "%s:unable to register hdlc device\n",__FILE__); + rc = register_hdlc_device(dev); + if (rc) { + printk(KERN_WARNING "%s:unable to register hdlc device\n", __FILE__); free_netdev(dev); return rc; } diff --git a/drivers/extcon/Kconfig b/drivers/extcon/Kconfig index 07122a9ef36e..5168a1324a65 100644 --- a/drivers/extcon/Kconfig +++ b/drivers/extcon/Kconfig @@ -29,7 +29,7 @@ config EXTCON_ADC_JACK config EXTCON_MAX77693 tristate "MAX77693 EXTCON Support" - depends on MFD_MAX77693 + depends on MFD_MAX77693 && INPUT select IRQ_DOMAIN select REGMAP_I2C help @@ -47,7 +47,7 @@ config EXTCON_MAX8997 config EXTCON_ARIZONA tristate "Wolfson Arizona EXTCON support" - depends on MFD_ARIZONA && INPUT + depends on MFD_ARIZONA && INPUT && SND_SOC help Say Y here to enable support for external accessory detection with Wolfson Arizona devices. These are audio CODECs with diff --git a/drivers/extcon/extcon-arizona.c b/drivers/extcon/extcon-arizona.c index 414aed50b1bc..dc357a4051f6 100644 --- a/drivers/extcon/extcon-arizona.c +++ b/drivers/extcon/extcon-arizona.c @@ -27,12 +27,18 @@ #include <linux/regulator/consumer.h> #include <linux/extcon.h> +#include <sound/soc.h> + #include <linux/mfd/arizona/core.h> #include <linux/mfd/arizona/pdata.h> #include <linux/mfd/arizona/registers.h> #define ARIZONA_NUM_BUTTONS 6 +#define ARIZONA_ACCDET_MODE_MIC 0 +#define ARIZONA_ACCDET_MODE_HPL 1 +#define ARIZONA_ACCDET_MODE_HPR 2 + struct arizona_extcon_info { struct device *dev; struct arizona *arizona; @@ -45,17 +51,28 @@ struct arizona_extcon_info { int micd_num_modes; bool micd_reva; + bool micd_clamp; + + struct delayed_work hpdet_work; + + bool hpdet_active; + bool hpdet_done; + + int num_hpdet_res; + unsigned int hpdet_res[3]; bool mic; bool detecting; int jack_flips; + int hpdet_ip; + struct extcon_dev edev; }; static const struct arizona_micd_config micd_default_modes[] = { - { ARIZONA_ACCDET_SRC, 1 << ARIZONA_MICD_BIAS_SRC_SHIFT, 0 }, { 0, 2 << ARIZONA_MICD_BIAS_SRC_SHIFT, 1 }, + { ARIZONA_ACCDET_SRC, 1 << ARIZONA_MICD_BIAS_SRC_SHIFT, 0 }, }; static struct { @@ -73,11 +90,13 @@ static struct { #define ARIZONA_CABLE_MECHANICAL 0 #define ARIZONA_CABLE_MICROPHONE 1 #define ARIZONA_CABLE_HEADPHONE 2 +#define ARIZONA_CABLE_LINEOUT 3 static const char *arizona_cable[] = { "Mechanical", "Microphone", "Headphone", + "Line-out", NULL, }; @@ -85,8 +104,9 @@ static void arizona_extcon_set_mode(struct arizona_extcon_info *info, int mode) { struct arizona *arizona = info->arizona; - gpio_set_value_cansleep(arizona->pdata.micd_pol_gpio, - info->micd_modes[mode].gpio); + if (arizona->pdata.micd_pol_gpio > 0) + gpio_set_value_cansleep(arizona->pdata.micd_pol_gpio, + info->micd_modes[mode].gpio); regmap_update_bits(arizona->regmap, ARIZONA_MIC_DETECT_1, ARIZONA_MICD_BIAS_SRC_MASK, info->micd_modes[mode].bias); @@ -98,19 +118,70 @@ static void arizona_extcon_set_mode(struct arizona_extcon_info *info, int mode) dev_dbg(arizona->dev, "Set jack polarity to %d\n", mode); } +static const char *arizona_extcon_get_micbias(struct arizona_extcon_info *info) +{ + switch (info->micd_modes[0].bias >> ARIZONA_MICD_BIAS_SRC_SHIFT) { + case 1: + return "MICBIAS1"; + case 2: + return "MICBIAS2"; + case 3: + return "MICBIAS3"; + default: + return "MICVDD"; + } +} + +static void arizona_extcon_pulse_micbias(struct arizona_extcon_info *info) +{ + struct arizona *arizona = info->arizona; + const char *widget = arizona_extcon_get_micbias(info); + struct snd_soc_dapm_context *dapm = arizona->dapm; + int ret; + + mutex_lock(&dapm->card->dapm_mutex); + + ret = snd_soc_dapm_force_enable_pin(dapm, widget); + if (ret != 0) + dev_warn(arizona->dev, "Failed to enable %s: %d\n", + widget, ret); + + mutex_unlock(&dapm->card->dapm_mutex); + + snd_soc_dapm_sync(dapm); + + if (!arizona->pdata.micd_force_micbias) { + mutex_lock(&dapm->card->dapm_mutex); + + ret = snd_soc_dapm_disable_pin(arizona->dapm, widget); + if (ret != 0) + dev_warn(arizona->dev, "Failed to disable %s: %d\n", + widget, ret); + + mutex_unlock(&dapm->card->dapm_mutex); + + snd_soc_dapm_sync(dapm); + } +} + static void arizona_start_mic(struct arizona_extcon_info *info) { struct arizona *arizona = info->arizona; bool change; int ret; - info->detecting = true; - info->mic = false; - info->jack_flips = 0; - /* Microphone detection can't use idle mode */ pm_runtime_get(info->dev); + if (info->detecting) { + ret = regulator_allow_bypass(info->micvdd, false); + if (ret != 0) { + dev_err(arizona->dev, + "Failed to regulate MICVDD: %d\n", + ret); + } + } + ret = regulator_enable(info->micvdd); if (ret != 0) { dev_err(arizona->dev, "Failed to enable MICVDD: %d\n", @@ -123,6 +194,12 @@ static void arizona_start_mic(struct arizona_extcon_info *info) regmap_write(arizona->regmap, 0x80, 0x0); } + regmap_update_bits(arizona->regmap, + ARIZONA_ACCESSORY_DETECT_MODE_1, + ARIZONA_ACCDET_MODE_MASK, ARIZONA_ACCDET_MODE_MIC); + + arizona_extcon_pulse_micbias(info); + regmap_update_bits_check(arizona->regmap, ARIZONA_MIC_DETECT_1, ARIZONA_MICD_ENA, ARIZONA_MICD_ENA, &change); @@ -135,18 +212,39 @@ static void arizona_start_mic(struct arizona_extcon_info *info) static void arizona_stop_mic(struct arizona_extcon_info *info) { struct arizona *arizona = info->arizona; + const char *widget = arizona_extcon_get_micbias(info); + struct snd_soc_dapm_context *dapm = arizona->dapm; bool change; + int ret; regmap_update_bits_check(arizona->regmap, ARIZONA_MIC_DETECT_1, ARIZONA_MICD_ENA, 0, &change); + mutex_lock(&dapm->card->dapm_mutex); + + ret = snd_soc_dapm_disable_pin(dapm, widget); + if (ret != 0) + dev_warn(arizona->dev, + "Failed to disable %s: %d\n", + widget, ret); + + mutex_unlock(&dapm->card->dapm_mutex); + + snd_soc_dapm_sync(dapm); + if (info->micd_reva) { regmap_write(arizona->regmap, 0x80, 0x3); regmap_write(arizona->regmap, 0x294, 2); regmap_write(arizona->regmap, 0x80, 0x0); } + ret = regulator_allow_bypass(info->micvdd, true); + if (ret != 0) { + dev_err(arizona->dev, "Failed to bypass MICVDD: %d\n", + ret); + } + if (change) { regulator_disable(info->micvdd); pm_runtime_mark_last_busy(info->dev); @@ -154,6 +252,478 @@ static void arizona_stop_mic(struct arizona_extcon_info *info) } } +static struct { + unsigned int factor_a; + unsigned int factor_b; +} arizona_hpdet_b_ranges[] = { + { 5528, 362464 }, + { 11084, 6186851 }, + { 11065, 65460395 }, +}; + +static struct { + int min; + int max; +} arizona_hpdet_c_ranges[] = { + { 0, 30 }, + { 8, 100 }, + { 100, 1000 }, + { 1000, 10000 }, +}; + +static int arizona_hpdet_read(struct arizona_extcon_info *info) +{ + struct arizona *arizona = info->arizona; + unsigned int val, range; + int ret; + + ret = regmap_read(arizona->regmap, ARIZONA_HEADPHONE_DETECT_2, &val); + if (ret != 0) { + dev_err(arizona->dev, "Failed to read HPDET status: %d\n", + ret); + return ret; + } + + switch (info->hpdet_ip) { + case 0: + if (!(val & ARIZONA_HP_DONE)) { + dev_err(arizona->dev, "HPDET did not complete: %x\n", + val); + return -EAGAIN; + } + + val &= ARIZONA_HP_LVL_MASK; + break; + + case 1: + if (!(val & ARIZONA_HP_DONE_B)) { + dev_err(arizona->dev, "HPDET did not complete: %x\n", + val); + return -EAGAIN; + } + + ret = regmap_read(arizona->regmap, ARIZONA_HP_DACVAL, &val); + if (ret != 0) { + dev_err(arizona->dev, "Failed to read HP value: %d\n", + ret); + return -EAGAIN; + } + + regmap_read(arizona->regmap, ARIZONA_HEADPHONE_DETECT_1, + &range); + range = (range & ARIZONA_HP_IMPEDANCE_RANGE_MASK) + >> ARIZONA_HP_IMPEDANCE_RANGE_SHIFT; + + if (range < ARRAY_SIZE(arizona_hpdet_b_ranges) - 1 && + (val < 100 || val > 0x3fb)) { + range++; + dev_dbg(arizona->dev, "Moving to HPDET range %d\n", + range); + regmap_update_bits(arizona->regmap, + ARIZONA_HEADPHONE_DETECT_1, + ARIZONA_HP_IMPEDANCE_RANGE_MASK, + range << + ARIZONA_HP_IMPEDANCE_RANGE_SHIFT); + return -EAGAIN; + } + + /* If we go out of range report top of range */ + if (val < 100 || val > 0x3fb) { + dev_dbg(arizona->dev, "Measurement out of range\n"); + return 10000; + } + + dev_dbg(arizona->dev, "HPDET read %d in range %d\n", + val, range); + + val = arizona_hpdet_b_ranges[range].factor_b + / ((val * 100) - + arizona_hpdet_b_ranges[range].factor_a); + break; + + default: + dev_warn(arizona->dev, "Unknown HPDET IP revision %d\n", + info->hpdet_ip); + case 2: + if (!(val & ARIZONA_HP_DONE_B)) { + dev_err(arizona->dev, "HPDET did not complete: %x\n", + val); + return -EAGAIN; + } + + val &= ARIZONA_HP_LVL_B_MASK; + + regmap_read(arizona->regmap, ARIZONA_HEADPHONE_DETECT_1, + &range); + range = (range & ARIZONA_HP_IMPEDANCE_RANGE_MASK) + >> ARIZONA_HP_IMPEDANCE_RANGE_SHIFT; + + /* Skip up or down a range? */ + if (range && (val < arizona_hpdet_c_ranges[range].min)) { + range--; + dev_dbg(arizona->dev, "Moving to HPDET range %d-%d\n", + arizona_hpdet_c_ranges[range].min, + arizona_hpdet_c_ranges[range].max); + regmap_update_bits(arizona->regmap, + ARIZONA_HEADPHONE_DETECT_1, + ARIZONA_HP_IMPEDANCE_RANGE_MASK, + range << + ARIZONA_HP_IMPEDANCE_RANGE_SHIFT); + return -EAGAIN; + } + + if (range < ARRAY_SIZE(arizona_hpdet_c_ranges) - 1 && + (val >= arizona_hpdet_c_ranges[range].max)) { + range++; + dev_dbg(arizona->dev, "Moving to HPDET range %d-%d\n", + arizona_hpdet_c_ranges[range].min, + arizona_hpdet_c_ranges[range].max); + regmap_update_bits(arizona->regmap, + ARIZONA_HEADPHONE_DETECT_1, + ARIZONA_HP_IMPEDANCE_RANGE_MASK, + range << + ARIZONA_HP_IMPEDANCE_RANGE_SHIFT); + return -EAGAIN; + } + } + + dev_dbg(arizona->dev, "HP impedance %d ohms\n", val); + return val; +} + +static int arizona_hpdet_do_id(struct arizona_extcon_info *info, int *reading) +{ + struct arizona *arizona = info->arizona; + int id_gpio = arizona->pdata.hpdet_id_gpio; + + /* + * If we're using HPDET for accessory identification we need + * to take multiple measurements, step through them in sequence. + */ + if (arizona->pdata.hpdet_acc_id) { + info->hpdet_res[info->num_hpdet_res++] = *reading; + + /* + * If the impedence is too high don't measure the + * second ground. + */ + if (info->num_hpdet_res == 1 && *reading >= 45) { + dev_dbg(arizona->dev, "Skipping ground flip\n"); + info->hpdet_res[info->num_hpdet_res++] = *reading; + } + + if (info->num_hpdet_res == 1) { + dev_dbg(arizona->dev, "Flipping ground\n"); + + regmap_update_bits(arizona->regmap, + ARIZONA_ACCESSORY_DETECT_MODE_1, + ARIZONA_ACCDET_SRC, + ~info->micd_modes[0].src); + + regmap_update_bits(arizona->regmap, + ARIZONA_HEADPHONE_DETECT_1, + ARIZONA_HP_POLL, ARIZONA_HP_POLL); + return -EAGAIN; + } + + /* Only check the mic directly if we didn't already ID it */ + if (id_gpio && info->num_hpdet_res == 2 && + !((info->hpdet_res[0] > info->hpdet_res[1] * 2))) { + dev_dbg(arizona->dev, "Measuring mic\n"); + + regmap_update_bits(arizona->regmap, + ARIZONA_ACCESSORY_DETECT_MODE_1, + ARIZONA_ACCDET_MODE_MASK | + ARIZONA_ACCDET_SRC, + ARIZONA_ACCDET_MODE_HPR | + info->micd_modes[0].src); + + gpio_set_value_cansleep(id_gpio, 1); + + regmap_update_bits(arizona->regmap, + ARIZONA_HEADPHONE_DETECT_1, + ARIZONA_HP_POLL, ARIZONA_HP_POLL); + return -EAGAIN; + } + + /* OK, got both. Now, compare... */ + dev_dbg(arizona->dev, "HPDET measured %d %d %d\n", + info->hpdet_res[0], info->hpdet_res[1], + info->hpdet_res[2]); + + + /* Take the headphone impedance for the main report */ + *reading = info->hpdet_res[0]; + + /* + * Either the two grounds measure differently or we + * measure the mic as high impedance. + */ + if ((info->hpdet_res[0] > info->hpdet_res[1] * 2) || + (id_gpio && info->hpdet_res[2] > 10)) { + dev_dbg(arizona->dev, "Detected mic\n"); + info->mic = true; + info->detecting = true; + } else { + dev_dbg(arizona->dev, "Detected headphone\n"); + } + + /* Make sure everything is reset back to the real polarity */ + regmap_update_bits(arizona->regmap, + ARIZONA_ACCESSORY_DETECT_MODE_1, + ARIZONA_ACCDET_SRC, + info->micd_modes[0].src); + } + + return 0; +} + +static irqreturn_t arizona_hpdet_irq(int irq, void *data) +{ + struct arizona_extcon_info *info = data; + struct arizona *arizona = info->arizona; + int id_gpio = arizona->pdata.hpdet_id_gpio; + int report = ARIZONA_CABLE_HEADPHONE; + unsigned int val; + int ret, reading; + + mutex_lock(&info->lock); + + /* If we got a spurious IRQ for some reason then ignore it */ + if (!info->hpdet_active) { + dev_warn(arizona->dev, "Spurious HPDET IRQ\n"); + mutex_unlock(&info->lock); + return IRQ_NONE; + } + + /* If the cable was removed while measuring ignore the result */ + ret = extcon_get_cable_state_(&info->edev, ARIZONA_CABLE_MECHANICAL); + if (ret < 0) { + dev_err(arizona->dev, "Failed to check cable state: %d\n", + ret); + goto out; + } else if (!ret) { + dev_dbg(arizona->dev, "Ignoring HPDET for removed cable\n"); + goto done; + } + + ret = arizona_hpdet_read(info); + if (ret == -EAGAIN) { + goto out; + } else if (ret < 0) { + goto done; + } + reading = ret; + + /* Reset back to starting range */ + regmap_update_bits(arizona->regmap, + ARIZONA_HEADPHONE_DETECT_1, + ARIZONA_HP_IMPEDANCE_RANGE_MASK | ARIZONA_HP_POLL, + 0); + + ret = arizona_hpdet_do_id(info, &reading); + if (ret == -EAGAIN) { + goto out; + } else if (ret < 0) { + goto done; + } + + /* Report high impedence cables as line outputs */ + if (reading >= 5000) + report = ARIZONA_CABLE_LINEOUT; + else + report = ARIZONA_CABLE_HEADPHONE; + + ret = extcon_set_cable_state_(&info->edev, report, true); + if (ret != 0) + dev_err(arizona->dev, "Failed to report HP/line: %d\n", + ret); + + mutex_lock(&arizona->dapm->card->dapm_mutex); + + ret = regmap_read(arizona->regmap, ARIZONA_OUTPUT_ENABLES_1, &val); + if (ret != 0) { + dev_err(arizona->dev, "Failed to read output enables: %d\n", + ret); + val = 0; + } + + if (!(val & (ARIZONA_OUT1L_ENA | ARIZONA_OUT1R_ENA))) { + ret = regmap_update_bits(arizona->regmap, 0x225, 0x4000, 0); + if (ret != 0) + dev_warn(arizona->dev, "Failed to undo magic: %d\n", + ret); + + ret = regmap_update_bits(arizona->regmap, 0x226, 0x4000, 0); + if (ret != 0) + dev_warn(arizona->dev, "Failed to undo magic: %d\n", + ret); + } + + mutex_unlock(&arizona->dapm->card->dapm_mutex); + +done: + if (id_gpio) + gpio_set_value_cansleep(id_gpio, 0); + + /* Revert back to MICDET mode */ + regmap_update_bits(arizona->regmap, + ARIZONA_ACCESSORY_DETECT_MODE_1, + ARIZONA_ACCDET_MODE_MASK, ARIZONA_ACCDET_MODE_MIC); + + /* If we have a mic then reenable MICDET */ + if (info->mic) + arizona_start_mic(info); + + if (info->hpdet_active) { + pm_runtime_put_autosuspend(info->dev); + info->hpdet_active = false; + } + + info->hpdet_done = true; + +out: + mutex_unlock(&info->lock); + + return IRQ_HANDLED; +} + +static void arizona_identify_headphone(struct arizona_extcon_info *info) +{ + struct arizona *arizona = info->arizona; + int ret; + + if (info->hpdet_done) + return; + + dev_dbg(arizona->dev, "Starting HPDET\n"); + + /* Make sure we keep the device enabled during the measurement */ + pm_runtime_get(info->dev); + + info->hpdet_active = true; + + if (info->mic) + arizona_stop_mic(info); + + ret = regmap_update_bits(arizona->regmap, 0x225, 0x4000, 0x4000); + if (ret != 0) + dev_warn(arizona->dev, "Failed to do magic: %d\n", ret); + + ret = regmap_update_bits(arizona->regmap, 0x226, 0x4000, 0x4000); + if (ret != 0) + dev_warn(arizona->dev, "Failed to do magic: %d\n", ret); + + ret = regmap_update_bits(arizona->regmap, + ARIZONA_ACCESSORY_DETECT_MODE_1, + ARIZONA_ACCDET_MODE_MASK, + ARIZONA_ACCDET_MODE_HPL); + if (ret != 0) { + dev_err(arizona->dev, "Failed to set HPDETL mode: %d\n", ret); + goto err; + } + + ret = regmap_update_bits(arizona->regmap, ARIZONA_HEADPHONE_DETECT_1, + ARIZONA_HP_POLL, ARIZONA_HP_POLL); + if (ret != 0) { + dev_err(arizona->dev, "Can't start HPDETL measurement: %d\n", + ret); + goto err; + } + + return; + +err: + regmap_update_bits(arizona->regmap, ARIZONA_ACCESSORY_DETECT_MODE_1, + ARIZONA_ACCDET_MODE_MASK, ARIZONA_ACCDET_MODE_MIC); + + /* Just report headphone */ + ret = extcon_update_state(&info->edev, + 1 << ARIZONA_CABLE_HEADPHONE, + 1 << ARIZONA_CABLE_HEADPHONE); + if (ret != 0) + dev_err(arizona->dev, "Failed to report headphone: %d\n", ret); + + if (info->mic) + arizona_start_mic(info); + + info->hpdet_active = false; +} + +static void arizona_start_hpdet_acc_id(struct arizona_extcon_info *info) +{ + struct arizona *arizona = info->arizona; + unsigned int val; + int ret; + + dev_dbg(arizona->dev, "Starting identification via HPDET\n"); + + /* Make sure we keep the device enabled during the measurement */ + pm_runtime_get_sync(info->dev); + + info->hpdet_active = true; + + arizona_extcon_pulse_micbias(info); + + mutex_lock(&arizona->dapm->card->dapm_mutex); + + ret = regmap_read(arizona->regmap, ARIZONA_OUTPUT_ENABLES_1, &val); + if (ret != 0) { + dev_err(arizona->dev, "Failed to read output enables: %d\n", + ret); + val = 0; + } + + if (!(val & (ARIZONA_OUT1L_ENA | ARIZONA_OUT1R_ENA))) { + ret = regmap_update_bits(arizona->regmap, 0x225, 0x4000, + 0x4000); + if (ret != 0) + dev_warn(arizona->dev, "Failed to do magic: %d\n", + ret); + + ret = regmap_update_bits(arizona->regmap, 0x226, 0x4000, + 0x4000); + if (ret != 0) + dev_warn(arizona->dev, "Failed to do magic: %d\n", + ret); + } + + mutex_unlock(&arizona->dapm->card->dapm_mutex); + + ret = regmap_update_bits(arizona->regmap, + ARIZONA_ACCESSORY_DETECT_MODE_1, + ARIZONA_ACCDET_SRC | ARIZONA_ACCDET_MODE_MASK, + info->micd_modes[0].src | + ARIZONA_ACCDET_MODE_HPL); + if (ret != 0) { + dev_err(arizona->dev, "Failed to set HPDETL mode: %d\n", ret); + goto err; + } + + ret = regmap_update_bits(arizona->regmap, ARIZONA_HEADPHONE_DETECT_1, + ARIZONA_HP_POLL, ARIZONA_HP_POLL); + if (ret != 0) { + dev_err(arizona->dev, "Can't start HPDETL measurement: %d\n", + ret); + goto err; + } + + return; + +err: + regmap_update_bits(arizona->regmap, ARIZONA_ACCESSORY_DETECT_MODE_1, + ARIZONA_ACCDET_MODE_MASK, ARIZONA_ACCDET_MODE_MIC); + + /* Just report headphone */ + ret = extcon_update_state(&info->edev, + 1 << ARIZONA_CABLE_HEADPHONE, + 1 << ARIZONA_CABLE_HEADPHONE); + if (ret != 0) + dev_err(arizona->dev, "Failed to report headphone: %d\n", ret); + + info->hpdet_active = false; +} + static irqreturn_t arizona_micdet(int irq, void *data) { struct arizona_extcon_info *info = data; @@ -187,16 +757,23 @@ static irqreturn_t arizona_micdet(int irq, void *data) /* If we got a high impedence we should have a headset, report it. */ if (info->detecting && (val & 0x400)) { + arizona_identify_headphone(info); + ret = extcon_update_state(&info->edev, - 1 << ARIZONA_CABLE_MICROPHONE | - 1 << ARIZONA_CABLE_HEADPHONE, - 1 << ARIZONA_CABLE_MICROPHONE | - 1 << ARIZONA_CABLE_HEADPHONE); + 1 << ARIZONA_CABLE_MICROPHONE, + 1 << ARIZONA_CABLE_MICROPHONE); if (ret != 0) dev_err(arizona->dev, "Headset report failed: %d\n", ret); + /* Don't need to regulate for button detection */ + ret = regulator_allow_bypass(info->micvdd, false); + if (ret != 0) { + dev_err(arizona->dev, "Failed to bypass MICVDD: %d\n", + ret); + } + info->mic = true; info->detecting = false; goto handled; @@ -209,20 +786,13 @@ static irqreturn_t arizona_micdet(int irq, void *data) * impedence then give up and report headphones. */ if (info->detecting && (val & 0x3f8)) { - info->jack_flips++; - if (info->jack_flips >= info->micd_num_modes) { - dev_dbg(arizona->dev, "Detected headphone\n"); + dev_dbg(arizona->dev, "Detected HP/line\n"); + arizona_identify_headphone(info); + info->detecting = false; - arizona_stop_mic(info); - ret = extcon_set_cable_state_(&info->edev, - ARIZONA_CABLE_HEADPHONE, - true); - if (ret != 0) - dev_err(arizona->dev, - "Headphone report failed: %d\n", - ret); + arizona_stop_mic(info); } else { info->micd_mode++; if (info->micd_mode == info->micd_num_modes) @@ -258,13 +828,7 @@ static irqreturn_t arizona_micdet(int irq, void *data) info->detecting = false; arizona_stop_mic(info); - ret = extcon_set_cable_state_(&info->edev, - ARIZONA_CABLE_HEADPHONE, - true); - if (ret != 0) - dev_err(arizona->dev, - "Headphone report failed: %d\n", - ret); + arizona_identify_headphone(info); } else { dev_warn(arizona->dev, "Button with no mic: %x\n", val); @@ -275,6 +839,7 @@ static irqreturn_t arizona_micdet(int irq, void *data) input_report_key(info->input, arizona_lvl_to_key[i].report, 0); input_sync(info->input); + arizona_extcon_pulse_micbias(info); } handled: @@ -284,17 +849,38 @@ handled: return IRQ_HANDLED; } +static void arizona_hpdet_work(struct work_struct *work) +{ + struct arizona_extcon_info *info = container_of(work, + struct arizona_extcon_info, + hpdet_work.work); + + mutex_lock(&info->lock); + arizona_start_hpdet_acc_id(info); + mutex_unlock(&info->lock); +} + static irqreturn_t arizona_jackdet(int irq, void *data) { struct arizona_extcon_info *info = data; struct arizona *arizona = info->arizona; - unsigned int val; + unsigned int val, present, mask; int ret, i; pm_runtime_get_sync(info->dev); + cancel_delayed_work_sync(&info->hpdet_work); + mutex_lock(&info->lock); + if (arizona->pdata.jd_gpio5) { + mask = ARIZONA_MICD_CLAMP_STS; + present = 0; + } else { + mask = ARIZONA_JD1_STS; + present = ARIZONA_JD1_STS; + } + ret = regmap_read(arizona->regmap, ARIZONA_AOD_IRQ_RAW_STATUS, &val); if (ret != 0) { dev_err(arizona->dev, "Failed to read jackdet status: %d\n", @@ -304,7 +890,7 @@ static irqreturn_t arizona_jackdet(int irq, void *data) return IRQ_NONE; } - if (val & ARIZONA_JD1_STS) { + if ((val & mask) == present) { dev_dbg(arizona->dev, "Detected jack\n"); ret = extcon_set_cable_state_(&info->edev, ARIZONA_CABLE_MECHANICAL, true); @@ -313,12 +899,31 @@ static irqreturn_t arizona_jackdet(int irq, void *data) dev_err(arizona->dev, "Mechanical report failed: %d\n", ret); - arizona_start_mic(info); + if (!arizona->pdata.hpdet_acc_id) { + info->detecting = true; + info->mic = false; + info->jack_flips = 0; + + arizona_start_mic(info); + } else { + schedule_delayed_work(&info->hpdet_work, + msecs_to_jiffies(250)); + } + + regmap_update_bits(arizona->regmap, + ARIZONA_JACK_DETECT_DEBOUNCE, + ARIZONA_MICD_CLAMP_DB | ARIZONA_JD1_DB, 0); } else { dev_dbg(arizona->dev, "Detected jack removal\n"); arizona_stop_mic(info); + info->num_hpdet_res = 0; + for (i = 0; i < ARRAY_SIZE(info->hpdet_res); i++) + info->hpdet_res[i] = 0; + info->mic = false; + info->hpdet_done = false; + for (i = 0; i < ARIZONA_NUM_BUTTONS; i++) input_report_key(info->input, arizona_lvl_to_key[i].report, 0); @@ -328,8 +933,20 @@ static irqreturn_t arizona_jackdet(int irq, void *data) if (ret != 0) dev_err(arizona->dev, "Removal report failed: %d\n", ret); + + regmap_update_bits(arizona->regmap, + ARIZONA_JACK_DETECT_DEBOUNCE, + ARIZONA_MICD_CLAMP_DB | ARIZONA_JD1_DB, + ARIZONA_MICD_CLAMP_DB | ARIZONA_JD1_DB); } + /* Clear trig_sts to make sure DCVDD is not forced up */ + regmap_write(arizona->regmap, ARIZONA_AOD_WKUP_AND_TRIG, + ARIZONA_MICD_CLAMP_FALL_TRIG_STS | + ARIZONA_MICD_CLAMP_RISE_TRIG_STS | + ARIZONA_JD1_FALL_TRIG_STS | + ARIZONA_JD1_RISE_TRIG_STS); + mutex_unlock(&info->lock); pm_runtime_mark_last_busy(info->dev); @@ -343,8 +960,12 @@ static int arizona_extcon_probe(struct platform_device *pdev) struct arizona *arizona = dev_get_drvdata(pdev->dev.parent); struct arizona_pdata *pdata; struct arizona_extcon_info *info; + int jack_irq_fall, jack_irq_rise; int ret, mode, i; + if (!arizona->dapm || !arizona->dapm->card) + return -EPROBE_DEFER; + pdata = dev_get_platdata(arizona->dev); info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL); @@ -364,7 +985,7 @@ static int arizona_extcon_probe(struct platform_device *pdev) mutex_init(&info->lock); info->arizona = arizona; info->dev = &pdev->dev; - info->detecting = true; + INIT_DELAYED_WORK(&info->hpdet_work, arizona_hpdet_work); platform_set_drvdata(pdev, info); switch (arizona->type) { @@ -374,6 +995,8 @@ static int arizona_extcon_probe(struct platform_device *pdev) info->micd_reva = true; break; default: + info->micd_clamp = true; + info->hpdet_ip = 1; break; } break; @@ -416,9 +1039,64 @@ static int arizona_extcon_probe(struct platform_device *pdev) } } + if (arizona->pdata.hpdet_id_gpio > 0) { + ret = devm_gpio_request_one(&pdev->dev, + arizona->pdata.hpdet_id_gpio, + GPIOF_OUT_INIT_LOW, + "HPDET"); + if (ret != 0) { + dev_err(arizona->dev, "Failed to request GPIO%d: %d\n", + arizona->pdata.hpdet_id_gpio, ret); + goto err_register; + } + } + + if (arizona->pdata.micd_bias_start_time) + regmap_update_bits(arizona->regmap, ARIZONA_MIC_DETECT_1, + ARIZONA_MICD_BIAS_STARTTIME_MASK, + arizona->pdata.micd_bias_start_time + << ARIZONA_MICD_BIAS_STARTTIME_SHIFT); + + if (arizona->pdata.micd_rate) + regmap_update_bits(arizona->regmap, ARIZONA_MIC_DETECT_1, + ARIZONA_MICD_RATE_MASK, + arizona->pdata.micd_rate + << ARIZONA_MICD_RATE_SHIFT); + + if (arizona->pdata.micd_dbtime) + regmap_update_bits(arizona->regmap, ARIZONA_MIC_DETECT_1, + ARIZONA_MICD_DBTIME_MASK, + arizona->pdata.micd_dbtime + << ARIZONA_MICD_DBTIME_SHIFT); + + /* + * If we have a clamp use it, activating in conjunction with + * GPIO5 if that is connected for jack detect operation. + */ + if (info->micd_clamp) { + if (arizona->pdata.jd_gpio5) { + /* Put the GPIO into input mode */ + regmap_write(arizona->regmap, ARIZONA_GPIO5_CTRL, + 0xc101); + + regmap_update_bits(arizona->regmap, + ARIZONA_MICD_CLAMP_CONTROL, + ARIZONA_MICD_CLAMP_MODE_MASK, 0x9); + } else { + regmap_update_bits(arizona->regmap, + ARIZONA_MICD_CLAMP_CONTROL, + ARIZONA_MICD_CLAMP_MODE_MASK, 0x4); + } + + regmap_update_bits(arizona->regmap, + ARIZONA_JACK_DETECT_DEBOUNCE, + ARIZONA_MICD_CLAMP_DB, + ARIZONA_MICD_CLAMP_DB); + } + arizona_extcon_set_mode(info, 0); - info->input = input_allocate_device(); + info->input = devm_input_allocate_device(&pdev->dev); if (!info->input) { dev_err(arizona->dev, "Can't allocate input dev\n"); ret = -ENOMEM; @@ -436,7 +1114,15 @@ static int arizona_extcon_probe(struct platform_device *pdev) pm_runtime_idle(&pdev->dev); pm_runtime_get_sync(&pdev->dev); - ret = arizona_request_irq(arizona, ARIZONA_IRQ_JD_RISE, + if (arizona->pdata.jd_gpio5) { + jack_irq_rise = ARIZONA_IRQ_MICD_CLAMP_RISE; + jack_irq_fall = ARIZONA_IRQ_MICD_CLAMP_FALL; + } else { + jack_irq_rise = ARIZONA_IRQ_JD_RISE; + jack_irq_fall = ARIZONA_IRQ_JD_FALL; + } + + ret = arizona_request_irq(arizona, jack_irq_rise, "JACKDET rise", arizona_jackdet, info); if (ret != 0) { dev_err(&pdev->dev, "Failed to get JACKDET rise IRQ: %d\n", @@ -444,21 +1130,21 @@ static int arizona_extcon_probe(struct platform_device *pdev) goto err_input; } - ret = arizona_set_irq_wake(arizona, ARIZONA_IRQ_JD_RISE, 1); + ret = arizona_set_irq_wake(arizona, jack_irq_rise, 1); if (ret != 0) { dev_err(&pdev->dev, "Failed to set JD rise IRQ wake: %d\n", ret); goto err_rise; } - ret = arizona_request_irq(arizona, ARIZONA_IRQ_JD_FALL, + ret = arizona_request_irq(arizona, jack_irq_fall, "JACKDET fall", arizona_jackdet, info); if (ret != 0) { dev_err(&pdev->dev, "Failed to get JD fall IRQ: %d\n", ret); goto err_rise_wake; } - ret = arizona_set_irq_wake(arizona, ARIZONA_IRQ_JD_FALL, 1); + ret = arizona_set_irq_wake(arizona, jack_irq_fall, 1); if (ret != 0) { dev_err(&pdev->dev, "Failed to set JD fall IRQ wake: %d\n", ret); @@ -472,11 +1158,12 @@ static int arizona_extcon_probe(struct platform_device *pdev) goto err_fall_wake; } - regmap_update_bits(arizona->regmap, ARIZONA_MIC_DETECT_1, - ARIZONA_MICD_BIAS_STARTTIME_MASK | - ARIZONA_MICD_RATE_MASK, - 7 << ARIZONA_MICD_BIAS_STARTTIME_SHIFT | - 8 << ARIZONA_MICD_RATE_SHIFT); + ret = arizona_request_irq(arizona, ARIZONA_IRQ_HPDET, + "HPDET", arizona_hpdet_irq, info); + if (ret != 0) { + dev_err(&pdev->dev, "Failed to get HPDET IRQ: %d\n", ret); + goto err_micdet; + } arizona_clk32k_enable(arizona); regmap_update_bits(arizona->regmap, ARIZONA_JACK_DETECT_DEBOUNCE, @@ -494,23 +1181,24 @@ static int arizona_extcon_probe(struct platform_device *pdev) ret = input_register_device(info->input); if (ret) { dev_err(&pdev->dev, "Can't register input device: %d\n", ret); - goto err_micdet; + goto err_hpdet; } return 0; +err_hpdet: + arizona_free_irq(arizona, ARIZONA_IRQ_HPDET, info); err_micdet: arizona_free_irq(arizona, ARIZONA_IRQ_MICDET, info); err_fall_wake: - arizona_set_irq_wake(arizona, ARIZONA_IRQ_JD_FALL, 0); + arizona_set_irq_wake(arizona, jack_irq_fall, 0); err_fall: - arizona_free_irq(arizona, ARIZONA_IRQ_JD_FALL, info); + arizona_free_irq(arizona, jack_irq_fall, info); err_rise_wake: - arizona_set_irq_wake(arizona, ARIZONA_IRQ_JD_RISE, 0); + arizona_set_irq_wake(arizona, jack_irq_rise, 0); err_rise: - arizona_free_irq(arizona, ARIZONA_IRQ_JD_RISE, info); + arizona_free_irq(arizona, jack_irq_rise, info); err_input: - input_free_device(info->input); err_register: pm_runtime_disable(&pdev->dev); extcon_dev_unregister(&info->edev); @@ -522,18 +1210,32 @@ static int arizona_extcon_remove(struct platform_device *pdev) { struct arizona_extcon_info *info = platform_get_drvdata(pdev); struct arizona *arizona = info->arizona; + int jack_irq_rise, jack_irq_fall; pm_runtime_disable(&pdev->dev); - arizona_set_irq_wake(arizona, ARIZONA_IRQ_JD_RISE, 0); - arizona_set_irq_wake(arizona, ARIZONA_IRQ_JD_FALL, 0); + regmap_update_bits(arizona->regmap, + ARIZONA_MICD_CLAMP_CONTROL, + ARIZONA_MICD_CLAMP_MODE_MASK, 0); + + if (arizona->pdata.jd_gpio5) { + jack_irq_rise = ARIZONA_IRQ_MICD_CLAMP_RISE; + jack_irq_fall = ARIZONA_IRQ_MICD_CLAMP_FALL; + } else { + jack_irq_rise = ARIZONA_IRQ_JD_RISE; + jack_irq_fall = ARIZONA_IRQ_JD_FALL; + } + + arizona_set_irq_wake(arizona, jack_irq_rise, 0); + arizona_set_irq_wake(arizona, jack_irq_fall, 0); + arizona_free_irq(arizona, ARIZONA_IRQ_HPDET, info); arizona_free_irq(arizona, ARIZONA_IRQ_MICDET, info); - arizona_free_irq(arizona, ARIZONA_IRQ_JD_RISE, info); - arizona_free_irq(arizona, ARIZONA_IRQ_JD_FALL, info); + arizona_free_irq(arizona, jack_irq_rise, info); + arizona_free_irq(arizona, jack_irq_fall, info); + cancel_delayed_work_sync(&info->hpdet_work); regmap_update_bits(arizona->regmap, ARIZONA_JACK_DETECT_ANALOGUE, ARIZONA_JD1_ENA, 0); arizona_clk32k_disable(arizona); - input_unregister_device(info->input); extcon_dev_unregister(&info->edev); return 0; diff --git a/drivers/extcon/extcon-gpio.c b/drivers/extcon/extcon-gpio.c index 1b14bfcdc176..02bec32adde4 100644 --- a/drivers/extcon/extcon-gpio.c +++ b/drivers/extcon/extcon-gpio.c @@ -29,7 +29,7 @@ #include <linux/workqueue.h> #include <linux/gpio.h> #include <linux/extcon.h> -#include <linux/extcon/extcon_gpio.h> +#include <linux/extcon/extcon-gpio.h> struct gpio_extcon_data { struct extcon_dev edev; diff --git a/drivers/extcon/extcon-max77693.c b/drivers/extcon/extcon-max77693.c index 8c17b65eb74d..b70e3815c459 100644 --- a/drivers/extcon/extcon-max77693.c +++ b/drivers/extcon/extcon-max77693.c @@ -19,6 +19,7 @@ #include <linux/module.h> #include <linux/i2c.h> #include <linux/slab.h> +#include <linux/input.h> #include <linux/interrupt.h> #include <linux/err.h> #include <linux/platform_device.h> @@ -29,92 +30,7 @@ #include <linux/irqdomain.h> #define DEV_NAME "max77693-muic" - -/* MAX77693 MUIC - STATUS1~3 Register */ -#define STATUS1_ADC_SHIFT (0) -#define STATUS1_ADCLOW_SHIFT (5) -#define STATUS1_ADCERR_SHIFT (6) -#define STATUS1_ADC1K_SHIFT (7) -#define STATUS1_ADC_MASK (0x1f << STATUS1_ADC_SHIFT) -#define STATUS1_ADCLOW_MASK (0x1 << STATUS1_ADCLOW_SHIFT) -#define STATUS1_ADCERR_MASK (0x1 << STATUS1_ADCERR_SHIFT) -#define STATUS1_ADC1K_MASK (0x1 << STATUS1_ADC1K_SHIFT) - -#define STATUS2_CHGTYP_SHIFT (0) -#define STATUS2_CHGDETRUN_SHIFT (3) -#define STATUS2_DCDTMR_SHIFT (4) -#define STATUS2_DXOVP_SHIFT (5) -#define STATUS2_VBVOLT_SHIFT (6) -#define STATUS2_VIDRM_SHIFT (7) -#define STATUS2_CHGTYP_MASK (0x7 << STATUS2_CHGTYP_SHIFT) -#define STATUS2_CHGDETRUN_MASK (0x1 << STATUS2_CHGDETRUN_SHIFT) -#define STATUS2_DCDTMR_MASK (0x1 << STATUS2_DCDTMR_SHIFT) -#define STATUS2_DXOVP_MASK (0x1 << STATUS2_DXOVP_SHIFT) -#define STATUS2_VBVOLT_MASK (0x1 << STATUS2_VBVOLT_SHIFT) -#define STATUS2_VIDRM_MASK (0x1 << STATUS2_VIDRM_SHIFT) - -#define STATUS3_OVP_SHIFT (2) -#define STATUS3_OVP_MASK (0x1 << STATUS3_OVP_SHIFT) - -/* MAX77693 CDETCTRL1~2 register */ -#define CDETCTRL1_CHGDETEN_SHIFT (0) -#define CDETCTRL1_CHGTYPMAN_SHIFT (1) -#define CDETCTRL1_DCDEN_SHIFT (2) -#define CDETCTRL1_DCD2SCT_SHIFT (3) -#define CDETCTRL1_CDDELAY_SHIFT (4) -#define CDETCTRL1_DCDCPL_SHIFT (5) -#define CDETCTRL1_CDPDET_SHIFT (7) -#define CDETCTRL1_CHGDETEN_MASK (0x1 << CDETCTRL1_CHGDETEN_SHIFT) -#define CDETCTRL1_CHGTYPMAN_MASK (0x1 << CDETCTRL1_CHGTYPMAN_SHIFT) -#define CDETCTRL1_DCDEN_MASK (0x1 << CDETCTRL1_DCDEN_SHIFT) -#define CDETCTRL1_DCD2SCT_MASK (0x1 << CDETCTRL1_DCD2SCT_SHIFT) -#define CDETCTRL1_CDDELAY_MASK (0x1 << CDETCTRL1_CDDELAY_SHIFT) -#define CDETCTRL1_DCDCPL_MASK (0x1 << CDETCTRL1_DCDCPL_SHIFT) -#define CDETCTRL1_CDPDET_MASK (0x1 << CDETCTRL1_CDPDET_SHIFT) - -#define CDETCTRL2_VIDRMEN_SHIFT (1) -#define CDETCTRL2_DXOVPEN_SHIFT (3) -#define CDETCTRL2_VIDRMEN_MASK (0x1 << CDETCTRL2_VIDRMEN_SHIFT) -#define CDETCTRL2_DXOVPEN_MASK (0x1 << CDETCTRL2_DXOVPEN_SHIFT) - -/* MAX77693 MUIC - CONTROL1~3 register */ -#define COMN1SW_SHIFT (0) -#define COMP2SW_SHIFT (3) -#define COMN1SW_MASK (0x7 << COMN1SW_SHIFT) -#define COMP2SW_MASK (0x7 << COMP2SW_SHIFT) -#define COMP_SW_MASK (COMP2SW_MASK | COMN1SW_MASK) -#define CONTROL1_SW_USB ((1 << COMP2SW_SHIFT) \ - | (1 << COMN1SW_SHIFT)) -#define CONTROL1_SW_AUDIO ((2 << COMP2SW_SHIFT) \ - | (2 << COMN1SW_SHIFT)) -#define CONTROL1_SW_UART ((3 << COMP2SW_SHIFT) \ - | (3 << COMN1SW_SHIFT)) -#define CONTROL1_SW_OPEN ((0 << COMP2SW_SHIFT) \ - | (0 << COMN1SW_SHIFT)) - -#define CONTROL2_LOWPWR_SHIFT (0) -#define CONTROL2_ADCEN_SHIFT (1) -#define CONTROL2_CPEN_SHIFT (2) -#define CONTROL2_SFOUTASRT_SHIFT (3) -#define CONTROL2_SFOUTORD_SHIFT (4) -#define CONTROL2_ACCDET_SHIFT (5) -#define CONTROL2_USBCPINT_SHIFT (6) -#define CONTROL2_RCPS_SHIFT (7) -#define CONTROL2_LOWPWR_MASK (0x1 << CONTROL2_LOWPWR_SHIFT) -#define CONTROL2_ADCEN_MASK (0x1 << CONTROL2_ADCEN_SHIFT) -#define CONTROL2_CPEN_MASK (0x1 << CONTROL2_CPEN_SHIFT) -#define CONTROL2_SFOUTASRT_MASK (0x1 << CONTROL2_SFOUTASRT_SHIFT) -#define CONTROL2_SFOUTORD_MASK (0x1 << CONTROL2_SFOUTORD_SHIFT) -#define CONTROL2_ACCDET_MASK (0x1 << CONTROL2_ACCDET_SHIFT) -#define CONTROL2_USBCPINT_MASK (0x1 << CONTROL2_USBCPINT_SHIFT) -#define CONTROL2_RCPS_MASK (0x1 << CONTROL2_RCPS_SHIFT) - -#define CONTROL3_JIGSET_SHIFT (0) -#define CONTROL3_BTLDSET_SHIFT (2) -#define CONTROL3_ADCDBSET_SHIFT (4) -#define CONTROL3_JIGSET_MASK (0x3 << CONTROL3_JIGSET_SHIFT) -#define CONTROL3_BTLDSET_MASK (0x3 << CONTROL3_BTLDSET_SHIFT) -#define CONTROL3_ADCDBSET_MASK (0x3 << CONTROL3_ADCDBSET_SHIFT) +#define DELAY_MS_DEFAULT 20000 /* unit: millisecond */ enum max77693_muic_adc_debounce_time { ADC_DEBOUNCE_TIME_5MS = 0, @@ -127,14 +43,40 @@ struct max77693_muic_info { struct device *dev; struct max77693_dev *max77693; struct extcon_dev *edev; - int prev_adc; - int prev_adc_gnd; + int prev_cable_type; + int prev_cable_type_gnd; int prev_chg_type; + int prev_button_type; u8 status[2]; int irq; struct work_struct irq_work; struct mutex mutex; + + /* + * Use delayed workqueue to detect cable state and then + * notify cable state to notifiee/platform through uevent. + * After completing the booting of platform, the extcon provider + * driver should notify cable state to upper layer. + */ + struct delayed_work wq_detcable; + + /* Button of dock device */ + struct input_dev *dock; + + /* + * Default usb/uart path whether UART/USB or AUX_UART/AUX_USB + * h/w path of COMP2/COMN1 on CONTROL1 register. + */ + int path_usb; + int path_uart; +}; + +enum max77693_muic_cable_group { + MAX77693_CABLE_GROUP_ADC = 0, + MAX77693_CABLE_GROUP_ADC_GND, + MAX77693_CABLE_GROUP_CHG, + MAX77693_CABLE_GROUP_VBVOLT, }; enum max77693_muic_charger_type { @@ -215,27 +157,59 @@ enum max77693_muic_acc_type { /* The below accessories have same ADC value so ADCLow and ADC1K bit is used to separate specific accessory */ - MAX77693_MUIC_GND_USB_OTG = 0x100, /* ADC:0x0, ADCLow:0, ADC1K:0 */ - MAX77693_MUIC_GND_AV_CABLE_LOAD = 0x102,/* ADC:0x0, ADCLow:1, ADC1K:0 */ - MAX77693_MUIC_GND_MHL_CABLE = 0x103, /* ADC:0x0, ADCLow:1, ADC1K:1 */ + MAX77693_MUIC_GND_USB_OTG = 0x100, /* ADC:0x0, VBVolot:0, ADCLow:0, ADC1K:0 */ + MAX77693_MUIC_GND_USB_OTG_VB = 0x104, /* ADC:0x0, VBVolot:1, ADCLow:0, ADC1K:0 */ + MAX77693_MUIC_GND_AV_CABLE_LOAD = 0x102,/* ADC:0x0, VBVolot:0, ADCLow:1, ADC1K:0 */ + MAX77693_MUIC_GND_MHL = 0x103, /* ADC:0x0, VBVolot:0, ADCLow:1, ADC1K:1 */ + MAX77693_MUIC_GND_MHL_VB = 0x107, /* ADC:0x0, VBVolot:1, ADCLow:1, ADC1K:1 */ }; /* MAX77693 MUIC device support below list of accessories(external connector) */ -const char *max77693_extcon_cable[] = { - [0] = "USB", - [1] = "USB-Host", - [2] = "TA", - [3] = "Fast-charger", - [4] = "Slow-charger", - [5] = "Charge-downstream", - [6] = "MHL", - [7] = "Audio-video-load", - [8] = "Audio-video-noload", - [9] = "JIG", +enum { + EXTCON_CABLE_USB = 0, + EXTCON_CABLE_USB_HOST, + EXTCON_CABLE_TA, + EXTCON_CABLE_FAST_CHARGER, + EXTCON_CABLE_SLOW_CHARGER, + EXTCON_CABLE_CHARGE_DOWNSTREAM, + EXTCON_CABLE_MHL, + EXTCON_CABLE_MHL_TA, + EXTCON_CABLE_JIG_USB_ON, + EXTCON_CABLE_JIG_USB_OFF, + EXTCON_CABLE_JIG_UART_OFF, + EXTCON_CABLE_JIG_UART_ON, + EXTCON_CABLE_DOCK_SMART, + EXTCON_CABLE_DOCK_DESK, + EXTCON_CABLE_DOCK_AUDIO, + + _EXTCON_CABLE_NUM, +}; + +static const char *max77693_extcon_cable[] = { + [EXTCON_CABLE_USB] = "USB", + [EXTCON_CABLE_USB_HOST] = "USB-Host", + [EXTCON_CABLE_TA] = "TA", + [EXTCON_CABLE_FAST_CHARGER] = "Fast-charger", + [EXTCON_CABLE_SLOW_CHARGER] = "Slow-charger", + [EXTCON_CABLE_CHARGE_DOWNSTREAM] = "Charge-downstream", + [EXTCON_CABLE_MHL] = "MHL", + [EXTCON_CABLE_MHL_TA] = "MHL_TA", + [EXTCON_CABLE_JIG_USB_ON] = "JIG-USB-ON", + [EXTCON_CABLE_JIG_USB_OFF] = "JIG-USB-OFF", + [EXTCON_CABLE_JIG_UART_OFF] = "JIG-UART-OFF", + [EXTCON_CABLE_JIG_UART_ON] = "Dock-Car", + [EXTCON_CABLE_DOCK_SMART] = "Dock-Smart", + [EXTCON_CABLE_DOCK_DESK] = "Dock-Desk", + [EXTCON_CABLE_DOCK_AUDIO] = "Dock-Audio", NULL, }; +/* + * max77693_muic_set_debounce_time - Set the debounce time of ADC + * @info: the instance including private data of max77693 MUIC + * @time: the debounce time of ADC + */ static int max77693_muic_set_debounce_time(struct max77693_muic_info *info, enum max77693_muic_adc_debounce_time time) { @@ -250,18 +224,29 @@ static int max77693_muic_set_debounce_time(struct max77693_muic_info *info, MAX77693_MUIC_REG_CTRL3, time << CONTROL3_ADCDBSET_SHIFT, CONTROL3_ADCDBSET_MASK); - if (ret) + if (ret) { dev_err(info->dev, "failed to set ADC debounce time\n"); + return -EAGAIN; + } break; default: dev_err(info->dev, "invalid ADC debounce time\n"); - ret = -EINVAL; - break; + return -EINVAL; } - return ret; + return 0; }; +/* + * max77693_muic_set_path - Set hardware line according to attached cable + * @info: the instance including private data of max77693 MUIC + * @value: the path according to attached cable + * @attached: the state of cable (true:attached, false:detached) + * + * The max77693 MUIC device share outside H/W line among a varity of cables + * so, this function set internal path of H/W line according to the type of + * attached cable. + */ static int max77693_muic_set_path(struct max77693_muic_info *info, u8 val, bool attached) { @@ -277,7 +262,7 @@ static int max77693_muic_set_path(struct max77693_muic_info *info, MAX77693_MUIC_REG_CTRL1, ctrl1, COMP_SW_MASK); if (ret < 0) { dev_err(info->dev, "failed to update MUIC register\n"); - goto out; + return -EAGAIN; } if (attached) @@ -290,141 +275,457 @@ static int max77693_muic_set_path(struct max77693_muic_info *info, CONTROL2_LOWPWR_MASK | CONTROL2_CPEN_MASK); if (ret < 0) { dev_err(info->dev, "failed to update MUIC register\n"); - goto out; + return -EAGAIN; } dev_info(info->dev, "CONTROL1 : 0x%02x, CONTROL2 : 0x%02x, state : %s\n", ctrl1, ctrl2, attached ? "attached" : "detached"); -out: - return ret; + + return 0; } -static int max77693_muic_adc_ground_handler(struct max77693_muic_info *info, - bool attached) +/* + * max77693_muic_get_cable_type - Return cable type and check cable state + * @info: the instance including private data of max77693 MUIC + * @group: the path according to attached cable + * @attached: store cable state and return + * + * This function check the cable state either attached or detached, + * and then divide precise type of cable according to cable group. + * - MAX77693_CABLE_GROUP_ADC + * - MAX77693_CABLE_GROUP_ADC_GND + * - MAX77693_CABLE_GROUP_CHG + * - MAX77693_CABLE_GROUP_VBVOLT + */ +static int max77693_muic_get_cable_type(struct max77693_muic_info *info, + enum max77693_muic_cable_group group, bool *attached) { - int ret = 0; - int type; - int adc, adc1k, adclow; + int cable_type = 0; + int adc; + int adc1k; + int adclow; + int vbvolt; + int chg_type; + + switch (group) { + case MAX77693_CABLE_GROUP_ADC: + /* + * Read ADC value to check cable type and decide cable state + * according to cable type + */ + adc = info->status[0] & STATUS1_ADC_MASK; + adc >>= STATUS1_ADC_SHIFT; + + /* + * Check current cable state/cable type and store cable type + * (info->prev_cable_type) for handling cable when cable is + * detached. + */ + if (adc == MAX77693_MUIC_ADC_OPEN) { + *attached = false; + + cable_type = info->prev_cable_type; + info->prev_cable_type = MAX77693_MUIC_ADC_OPEN; + } else { + *attached = true; + + cable_type = info->prev_cable_type = adc; + } + break; + case MAX77693_CABLE_GROUP_ADC_GND: + /* + * Read ADC value to check cable type and decide cable state + * according to cable type + */ + adc = info->status[0] & STATUS1_ADC_MASK; + adc >>= STATUS1_ADC_SHIFT; + + /* + * Check current cable state/cable type and store cable type + * (info->prev_cable_type/_gnd) for handling cable when cable + * is detached. + */ + if (adc == MAX77693_MUIC_ADC_OPEN) { + *attached = false; + + cable_type = info->prev_cable_type_gnd; + info->prev_cable_type_gnd = MAX77693_MUIC_ADC_OPEN; + } else { + *attached = true; + + adclow = info->status[0] & STATUS1_ADCLOW_MASK; + adclow >>= STATUS1_ADCLOW_SHIFT; + adc1k = info->status[0] & STATUS1_ADC1K_MASK; + adc1k >>= STATUS1_ADC1K_SHIFT; + + vbvolt = info->status[1] & STATUS2_VBVOLT_MASK; + vbvolt >>= STATUS2_VBVOLT_SHIFT; + + /** + * [0x1][VBVolt][ADCLow][ADC1K] + * [0x1 0 0 0 ] : USB_OTG + * [0x1 1 0 0 ] : USB_OTG_VB + * [0x1 0 1 0 ] : Audio Video Cable with load + * [0x1 0 1 1 ] : MHL without charging connector + * [0x1 1 1 1 ] : MHL with charging connector + */ + cable_type = ((0x1 << 8) + | (vbvolt << 2) + | (adclow << 1) + | adc1k); + + info->prev_cable_type = adc; + info->prev_cable_type_gnd = cable_type; + } - if (attached) { + break; + case MAX77693_CABLE_GROUP_CHG: + /* + * Read charger type to check cable type and decide cable state + * according to type of charger cable. + */ + chg_type = info->status[1] & STATUS2_CHGTYP_MASK; + chg_type >>= STATUS2_CHGTYP_SHIFT; + + if (chg_type == MAX77693_CHARGER_TYPE_NONE) { + *attached = false; + + cable_type = info->prev_chg_type; + info->prev_chg_type = MAX77693_CHARGER_TYPE_NONE; + } else { + *attached = true; + + /* + * Check current cable state/cable type and store cable + * type(info->prev_chg_type) for handling cable when + * charger cable is detached. + */ + cable_type = info->prev_chg_type = chg_type; + } + + break; + case MAX77693_CABLE_GROUP_VBVOLT: + /* + * Read ADC value to check cable type and decide cable state + * according to cable type + */ adc = info->status[0] & STATUS1_ADC_MASK; - adclow = info->status[0] & STATUS1_ADCLOW_MASK; - adclow >>= STATUS1_ADCLOW_SHIFT; - adc1k = info->status[0] & STATUS1_ADC1K_MASK; - adc1k >>= STATUS1_ADC1K_SHIFT; - - /** - * [0x1][ADCLow][ADC1K] - * [0x1 0 0 ] : USB_OTG - * [0x1 1 0 ] : Audio Video Cable with load - * [0x1 1 1 ] : MHL + adc >>= STATUS1_ADC_SHIFT; + chg_type = info->status[1] & STATUS2_CHGTYP_MASK; + chg_type >>= STATUS2_CHGTYP_SHIFT; + + if (adc == MAX77693_MUIC_ADC_OPEN + && chg_type == MAX77693_CHARGER_TYPE_NONE) + *attached = false; + else + *attached = true; + + /* + * Read vbvolt field, if vbvolt is 1, + * this cable is used for charging. + */ + vbvolt = info->status[1] & STATUS2_VBVOLT_MASK; + vbvolt >>= STATUS2_VBVOLT_SHIFT; + + cable_type = vbvolt; + break; + default: + dev_err(info->dev, "Unknown cable group (%d)\n", group); + cable_type = -EINVAL; + break; + } + + return cable_type; +} + +static int max77693_muic_dock_handler(struct max77693_muic_info *info, + int cable_type, bool attached) +{ + int ret = 0; + int vbvolt; + bool cable_attached; + char dock_name[CABLE_NAME_MAX]; + + dev_info(info->dev, + "external connector is %s (adc:0x%02x)\n", + attached ? "attached" : "detached", cable_type); + + switch (cable_type) { + case MAX77693_MUIC_ADC_RESERVED_ACC_3: /* Dock-Smart */ + /* + * Check power cable whether attached or detached state. + * The Dock-Smart device need surely external power supply. + * If power cable(USB/TA) isn't connected to Dock device, + * user can't use Dock-Smart for desktop mode. + */ + vbvolt = max77693_muic_get_cable_type(info, + MAX77693_CABLE_GROUP_VBVOLT, &cable_attached); + if (attached && !vbvolt) { + dev_warn(info->dev, + "Cannot detect external power supply\n"); + return 0; + } + + /* + * Notify Dock-Smart/MHL state. + * - Dock-Smart device include three type of cable which + * are HDMI, USB for mouse/keyboard and micro-usb port + * for USB/TA cable. Dock-Smart device need always exteranl + * power supply(USB/TA cable through micro-usb cable). Dock- + * Smart device support screen output of target to separate + * monitor and mouse/keyboard for desktop mode. + * + * Features of 'USB/TA cable with Dock-Smart device' + * - Support MHL + * - Support external output feature of audio + * - Support charging through micro-usb port without data + * connection if TA cable is connected to target. + * - Support charging and data connection through micro-usb port + * if USB cable is connected between target and host + * device. + * - Support OTG device (Mouse/Keyboard) */ - type = ((0x1 << 8) | (adclow << 1) | adc1k); + ret = max77693_muic_set_path(info, info->path_usb, attached); + if (ret < 0) + return ret; + + extcon_set_cable_state(info->edev, "Dock-Smart", attached); + extcon_set_cable_state(info->edev, "MHL", attached); + goto out; + case MAX77693_MUIC_ADC_FACTORY_MODE_UART_ON: /* Dock-Car */ + strcpy(dock_name, "Dock-Car"); + break; + case MAX77693_MUIC_ADC_AUDIO_MODE_REMOTE: /* Dock-Desk */ + strcpy(dock_name, "Dock-Desk"); + break; + case MAX77693_MUIC_ADC_AV_CABLE_NOLOAD: /* Dock-Audio */ + strcpy(dock_name, "Dock-Audio"); + if (!attached) + extcon_set_cable_state(info->edev, "USB", false); + break; + default: + dev_err(info->dev, "failed to detect %s dock device\n", + attached ? "attached" : "detached"); + return -EINVAL; + } + + /* Dock-Car/Desk/Audio, PATH:AUDIO */ + ret = max77693_muic_set_path(info, CONTROL1_SW_AUDIO, attached); + if (ret < 0) + return ret; + extcon_set_cable_state(info->edev, dock_name, attached); + +out: + return 0; +} + +static int max77693_muic_dock_button_handler(struct max77693_muic_info *info, + int button_type, bool attached) +{ + struct input_dev *dock = info->dock; + unsigned int code; + + switch (button_type) { + case MAX77693_MUIC_ADC_REMOTE_S3_BUTTON-1 + ... MAX77693_MUIC_ADC_REMOTE_S3_BUTTON+1: + /* DOCK_KEY_PREV */ + code = KEY_PREVIOUSSONG; + break; + case MAX77693_MUIC_ADC_REMOTE_S7_BUTTON-1 + ... MAX77693_MUIC_ADC_REMOTE_S7_BUTTON+1: + /* DOCK_KEY_NEXT */ + code = KEY_NEXTSONG; + break; + case MAX77693_MUIC_ADC_REMOTE_S9_BUTTON: + /* DOCK_VOL_DOWN */ + code = KEY_VOLUMEDOWN; + break; + case MAX77693_MUIC_ADC_REMOTE_S10_BUTTON: + /* DOCK_VOL_UP */ + code = KEY_VOLUMEUP; + break; + case MAX77693_MUIC_ADC_REMOTE_S12_BUTTON-1 + ... MAX77693_MUIC_ADC_REMOTE_S12_BUTTON+1: + /* DOCK_KEY_PLAY_PAUSE */ + code = KEY_PLAYPAUSE; + break; + default: + dev_err(info->dev, + "failed to detect %s key (adc:0x%x)\n", + attached ? "pressed" : "released", button_type); + return -EINVAL; + } + + input_event(dock, EV_KEY, code, attached); + input_sync(dock); + + return 0; +} - /* Store previous ADC value to handle accessory - when accessory will be detached */ - info->prev_adc = adc; - info->prev_adc_gnd = type; - } else - type = info->prev_adc_gnd; +static int max77693_muic_adc_ground_handler(struct max77693_muic_info *info) +{ + int cable_type_gnd; + int ret = 0; + bool attached; - switch (type) { + cable_type_gnd = max77693_muic_get_cable_type(info, + MAX77693_CABLE_GROUP_ADC_GND, &attached); + + switch (cable_type_gnd) { case MAX77693_MUIC_GND_USB_OTG: - /* USB_OTG */ + case MAX77693_MUIC_GND_USB_OTG_VB: + /* USB_OTG, PATH: AP_USB */ ret = max77693_muic_set_path(info, CONTROL1_SW_USB, attached); if (ret < 0) - goto out; + return ret; extcon_set_cable_state(info->edev, "USB-Host", attached); break; case MAX77693_MUIC_GND_AV_CABLE_LOAD: - /* Audio Video Cable with load */ + /* Audio Video Cable with load, PATH:AUDIO */ ret = max77693_muic_set_path(info, CONTROL1_SW_AUDIO, attached); if (ret < 0) - goto out; + return ret; extcon_set_cable_state(info->edev, "Audio-video-load", attached); break; - case MAX77693_MUIC_GND_MHL_CABLE: - /* MHL */ + case MAX77693_MUIC_GND_MHL: + case MAX77693_MUIC_GND_MHL_VB: + /* MHL or MHL with USB/TA cable */ extcon_set_cable_state(info->edev, "MHL", attached); break; default: - dev_err(info->dev, "failed to detect %s accessory\n", + dev_err(info->dev, "failed to detect %s cable of gnd type\n", attached ? "attached" : "detached"); - dev_err(info->dev, "- adc:0x%x, adclow:0x%x, adc1k:0x%x\n", - adc, adclow, adc1k); - ret = -EINVAL; + return -EINVAL; + } + + return 0; +} + +static int max77693_muic_jig_handler(struct max77693_muic_info *info, + int cable_type, bool attached) +{ + char cable_name[32]; + int ret = 0; + u8 path = CONTROL1_SW_OPEN; + + dev_info(info->dev, + "external connector is %s (adc:0x%02x)\n", + attached ? "attached" : "detached", cable_type); + + switch (cable_type) { + case MAX77693_MUIC_ADC_FACTORY_MODE_USB_OFF: /* ADC_JIG_USB_OFF */ + /* PATH:AP_USB */ + strcpy(cable_name, "JIG-USB-OFF"); + path = CONTROL1_SW_USB; + break; + case MAX77693_MUIC_ADC_FACTORY_MODE_USB_ON: /* ADC_JIG_USB_ON */ + /* PATH:AP_USB */ + strcpy(cable_name, "JIG-USB-ON"); + path = CONTROL1_SW_USB; break; + case MAX77693_MUIC_ADC_FACTORY_MODE_UART_OFF: /* ADC_JIG_UART_OFF */ + /* PATH:AP_UART */ + strcpy(cable_name, "JIG-UART-OFF"); + path = CONTROL1_SW_UART; + break; + default: + dev_err(info->dev, "failed to detect %s jig cable\n", + attached ? "attached" : "detached"); + return -EINVAL; } -out: - return ret; + ret = max77693_muic_set_path(info, path, attached); + if (ret < 0) + return ret; + + extcon_set_cable_state(info->edev, cable_name, attached); + + return 0; } -static int max77693_muic_adc_handler(struct max77693_muic_info *info, - int curr_adc, bool attached) +static int max77693_muic_adc_handler(struct max77693_muic_info *info) { + int cable_type; + int button_type; + bool attached; int ret = 0; - int adc; - if (attached) { - /* Store ADC value to handle accessory - when accessory will be detached */ - info->prev_adc = curr_adc; - adc = curr_adc; - } else - adc = info->prev_adc; + /* Check accessory state which is either detached or attached */ + cable_type = max77693_muic_get_cable_type(info, + MAX77693_CABLE_GROUP_ADC, &attached); dev_info(info->dev, "external connector is %s (adc:0x%02x, prev_adc:0x%x)\n", - attached ? "attached" : "detached", curr_adc, info->prev_adc); + attached ? "attached" : "detached", cable_type, + info->prev_cable_type); - switch (adc) { + switch (cable_type) { case MAX77693_MUIC_ADC_GROUND: /* USB_OTG/MHL/Audio */ - max77693_muic_adc_ground_handler(info, attached); + max77693_muic_adc_ground_handler(info); break; case MAX77693_MUIC_ADC_FACTORY_MODE_USB_OFF: case MAX77693_MUIC_ADC_FACTORY_MODE_USB_ON: - /* USB */ - ret = max77693_muic_set_path(info, CONTROL1_SW_USB, attached); - if (ret < 0) - goto out; - extcon_set_cable_state(info->edev, "USB", attached); - break; case MAX77693_MUIC_ADC_FACTORY_MODE_UART_OFF: - case MAX77693_MUIC_ADC_FACTORY_MODE_UART_ON: /* JIG */ - ret = max77693_muic_set_path(info, CONTROL1_SW_UART, attached); + ret = max77693_muic_jig_handler(info, cable_type, attached); if (ret < 0) - goto out; - extcon_set_cable_state(info->edev, "JIG", attached); + return ret; break; - case MAX77693_MUIC_ADC_AUDIO_MODE_REMOTE: - /* Audio Video cable with no-load */ - ret = max77693_muic_set_path(info, CONTROL1_SW_AUDIO, attached); + case MAX77693_MUIC_ADC_RESERVED_ACC_3: /* Dock-Smart */ + case MAX77693_MUIC_ADC_FACTORY_MODE_UART_ON: /* Dock-Car */ + case MAX77693_MUIC_ADC_AUDIO_MODE_REMOTE: /* Dock-Desk */ + case MAX77693_MUIC_ADC_AV_CABLE_NOLOAD: /* Dock-Audio */ + /* + * DOCK device + * + * The MAX77693 MUIC device can detect total 34 cable type + * except of charger cable and MUIC device didn't define + * specfic role of cable in the range of from 0x01 to 0x12 + * of ADC value. So, can use/define cable with no role according + * to schema of hardware board. + */ + ret = max77693_muic_dock_handler(info, cable_type, attached); if (ret < 0) - goto out; - extcon_set_cable_state(info->edev, - "Audio-video-noload", attached); + return ret; + break; + case MAX77693_MUIC_ADC_REMOTE_S3_BUTTON: /* DOCK_KEY_PREV */ + case MAX77693_MUIC_ADC_REMOTE_S7_BUTTON: /* DOCK_KEY_NEXT */ + case MAX77693_MUIC_ADC_REMOTE_S9_BUTTON: /* DOCK_VOL_DOWN */ + case MAX77693_MUIC_ADC_REMOTE_S10_BUTTON: /* DOCK_VOL_UP */ + case MAX77693_MUIC_ADC_REMOTE_S12_BUTTON: /* DOCK_KEY_PLAY_PAUSE */ + /* + * Button of DOCK device + * - the Prev/Next/Volume Up/Volume Down/Play-Pause button + * + * The MAX77693 MUIC device can detect total 34 cable type + * except of charger cable and MUIC device didn't define + * specfic role of cable in the range of from 0x01 to 0x12 + * of ADC value. So, can use/define cable with no role according + * to schema of hardware board. + */ + if (attached) + button_type = info->prev_button_type = cable_type; + else + button_type = info->prev_button_type; + + ret = max77693_muic_dock_button_handler(info, button_type, + attached); + if (ret < 0) + return ret; break; case MAX77693_MUIC_ADC_SEND_END_BUTTON: case MAX77693_MUIC_ADC_REMOTE_S1_BUTTON: case MAX77693_MUIC_ADC_REMOTE_S2_BUTTON: - case MAX77693_MUIC_ADC_REMOTE_S3_BUTTON: case MAX77693_MUIC_ADC_REMOTE_S4_BUTTON: case MAX77693_MUIC_ADC_REMOTE_S5_BUTTON: case MAX77693_MUIC_ADC_REMOTE_S6_BUTTON: - case MAX77693_MUIC_ADC_REMOTE_S7_BUTTON: case MAX77693_MUIC_ADC_REMOTE_S8_BUTTON: - case MAX77693_MUIC_ADC_REMOTE_S9_BUTTON: - case MAX77693_MUIC_ADC_REMOTE_S10_BUTTON: case MAX77693_MUIC_ADC_REMOTE_S11_BUTTON: - case MAX77693_MUIC_ADC_REMOTE_S12_BUTTON: case MAX77693_MUIC_ADC_RESERVED_ACC_1: case MAX77693_MUIC_ADC_RESERVED_ACC_2: - case MAX77693_MUIC_ADC_RESERVED_ACC_3: case MAX77693_MUIC_ADC_RESERVED_ACC_4: case MAX77693_MUIC_ADC_RESERVED_ACC_5: case MAX77693_MUIC_ADC_CEA936_AUDIO: @@ -432,60 +733,164 @@ static int max77693_muic_adc_handler(struct max77693_muic_info *info, case MAX77693_MUIC_ADC_TTY_CONVERTER: case MAX77693_MUIC_ADC_UART_CABLE: case MAX77693_MUIC_ADC_CEA936A_TYPE1_CHG: - case MAX77693_MUIC_ADC_AV_CABLE_NOLOAD: case MAX77693_MUIC_ADC_CEA936A_TYPE2_CHG: - /* This accessory isn't used in general case if it is specially - needed to detect additional accessory, should implement - proper operation when this accessory is attached/detached. */ + /* + * This accessory isn't used in general case if it is specially + * needed to detect additional accessory, should implement + * proper operation when this accessory is attached/detached. + */ dev_info(info->dev, "accessory is %s but it isn't used (adc:0x%x)\n", - attached ? "attached" : "detached", adc); - goto out; + attached ? "attached" : "detached", cable_type); + return -EAGAIN; default: dev_err(info->dev, "failed to detect %s accessory (adc:0x%x)\n", - attached ? "attached" : "detached", adc); - ret = -EINVAL; - goto out; + attached ? "attached" : "detached", cable_type); + return -EINVAL; } -out: - return ret; + return 0; } -static int max77693_muic_chg_handler(struct max77693_muic_info *info, - int curr_chg_type, bool attached) +static int max77693_muic_chg_handler(struct max77693_muic_info *info) { - int ret = 0; int chg_type; + int cable_type_gnd; + int cable_type; + bool attached; + bool cable_attached; + int ret = 0; - if (attached) { - /* Store previous charger type to control - when charger accessory will be detached */ - info->prev_chg_type = curr_chg_type; - chg_type = curr_chg_type; - } else - chg_type = info->prev_chg_type; + chg_type = max77693_muic_get_cable_type(info, + MAX77693_CABLE_GROUP_CHG, &attached); dev_info(info->dev, "external connector is %s(chg_type:0x%x, prev_chg_type:0x%x)\n", attached ? "attached" : "detached", - curr_chg_type, info->prev_chg_type); + chg_type, info->prev_chg_type); switch (chg_type) { case MAX77693_CHARGER_TYPE_USB: - ret = max77693_muic_set_path(info, CONTROL1_SW_USB, attached); - if (ret < 0) - goto out; - extcon_set_cable_state(info->edev, "USB", attached); + case MAX77693_CHARGER_TYPE_DEDICATED_CHG: + case MAX77693_CHARGER_TYPE_NONE: + /* Check MAX77693_CABLE_GROUP_ADC_GND type */ + cable_type_gnd = max77693_muic_get_cable_type(info, + MAX77693_CABLE_GROUP_ADC_GND, + &cable_attached); + switch (cable_type_gnd) { + case MAX77693_MUIC_GND_MHL: + case MAX77693_MUIC_GND_MHL_VB: + /* + * MHL cable with MHL_TA(USB/TA) cable + * - MHL cable include two port(HDMI line and separate micro- + * usb port. When the target connect MHL cable, extcon driver + * check whether MHL_TA(USB/TA) cable is connected. If MHL_TA + * cable is connected, extcon driver notify state to notifiee + * for charging battery. + * + * Features of 'MHL_TA(USB/TA) with MHL cable' + * - Support MHL + * - Support charging through micro-usb port without data connection + */ + extcon_set_cable_state(info->edev, "MHL_TA", attached); + if (!cable_attached) + extcon_set_cable_state(info->edev, "MHL", cable_attached); + break; + } + + /* Check MAX77693_CABLE_GROUP_ADC type */ + cable_type = max77693_muic_get_cable_type(info, + MAX77693_CABLE_GROUP_ADC, + &cable_attached); + switch (cable_type) { + case MAX77693_MUIC_ADC_AV_CABLE_NOLOAD: /* Dock-Audio */ + /* + * Dock-Audio device with USB/TA cable + * - Dock device include two port(Dock-Audio and micro-usb + * port). When the target connect Dock-Audio device, extcon + * driver check whether USB/TA cable is connected. If USB/TA + * cable is connected, extcon driver notify state to notifiee + * for charging battery. + * + * Features of 'USB/TA cable with Dock-Audio device' + * - Support external output feature of audio. + * - Support charging through micro-usb port without data + * connection. + */ + extcon_set_cable_state(info->edev, "USB", attached); + + if (!cable_attached) + extcon_set_cable_state(info->edev, "Dock-Audio", cable_attached); + break; + case MAX77693_MUIC_ADC_RESERVED_ACC_3: /* Dock-Smart */ + /* + * Dock-Smart device with USB/TA cable + * - Dock-Desk device include three type of cable which + * are HDMI, USB for mouse/keyboard and micro-usb port + * for USB/TA cable. Dock-Smart device need always exteranl + * power supply(USB/TA cable through micro-usb cable). Dock- + * Smart device support screen output of target to separate + * monitor and mouse/keyboard for desktop mode. + * + * Features of 'USB/TA cable with Dock-Smart device' + * - Support MHL + * - Support external output feature of audio + * - Support charging through micro-usb port without data + * connection if TA cable is connected to target. + * - Support charging and data connection through micro-usb port + * if USB cable is connected between target and host + * device. + * - Support OTG device (Mouse/Keyboard) + */ + ret = max77693_muic_set_path(info, info->path_usb, attached); + if (ret < 0) + return ret; + + extcon_set_cable_state(info->edev, "Dock-Smart", attached); + extcon_set_cable_state(info->edev, "MHL", attached); + + break; + } + + /* Check MAX77693_CABLE_GROUP_CHG type */ + switch (chg_type) { + case MAX77693_CHARGER_TYPE_NONE: + /* + * When MHL(with USB/TA cable) or Dock-Audio with USB/TA cable + * is attached, muic device happen below two interrupt. + * - 'MAX77693_MUIC_IRQ_INT1_ADC' for detecting MHL/Dock-Audio. + * - 'MAX77693_MUIC_IRQ_INT2_CHGTYP' for detecting USB/TA cable + * connected to MHL or Dock-Audio. + * Always, happen eariler MAX77693_MUIC_IRQ_INT1_ADC interrupt + * than MAX77693_MUIC_IRQ_INT2_CHGTYP interrupt. + * + * If user attach MHL (with USB/TA cable and immediately detach + * MHL with USB/TA cable before MAX77693_MUIC_IRQ_INT2_CHGTYP + * interrupt is happened, USB/TA cable remain connected state to + * target. But USB/TA cable isn't connected to target. The user + * be face with unusual action. So, driver should check this + * situation in spite of, that previous charger type is N/A. + */ + break; + case MAX77693_CHARGER_TYPE_USB: + /* Only USB cable, PATH:AP_USB */ + ret = max77693_muic_set_path(info, info->path_usb, attached); + if (ret < 0) + return ret; + + extcon_set_cable_state(info->edev, "USB", attached); + break; + case MAX77693_CHARGER_TYPE_DEDICATED_CHG: + /* Only TA cable */ + extcon_set_cable_state(info->edev, "TA", attached); + break; + } break; case MAX77693_CHARGER_TYPE_DOWNSTREAM_PORT: extcon_set_cable_state(info->edev, "Charge-downstream", attached); break; - case MAX77693_CHARGER_TYPE_DEDICATED_CHG: - extcon_set_cable_state(info->edev, "TA", attached); - break; case MAX77693_CHARGER_TYPE_APPLE_500MA: extcon_set_cable_state(info->edev, "Slow-charger", attached); break; @@ -498,22 +903,18 @@ static int max77693_muic_chg_handler(struct max77693_muic_info *info, dev_err(info->dev, "failed to detect %s accessory (chg_type:0x%x)\n", attached ? "attached" : "detached", chg_type); - ret = -EINVAL; - goto out; + return -EINVAL; } -out: - return ret; + return 0; } static void max77693_muic_irq_work(struct work_struct *work) { struct max77693_muic_info *info = container_of(work, struct max77693_muic_info, irq_work); - int curr_adc, curr_chg_type; int irq_type = -1; int i, ret = 0; - bool attached = true; if (!info->edev) return; @@ -539,14 +940,7 @@ static void max77693_muic_irq_work(struct work_struct *work) case MAX77693_MUIC_IRQ_INT1_ADC1K: /* Handle all of accessory except for type of charger accessory */ - curr_adc = info->status[0] & STATUS1_ADC_MASK; - curr_adc >>= STATUS1_ADC_SHIFT; - - /* Check accessory state which is either detached or attached */ - if (curr_adc == MAX77693_MUIC_ADC_OPEN) - attached = false; - - ret = max77693_muic_adc_handler(info, curr_adc, attached); + ret = max77693_muic_adc_handler(info); break; case MAX77693_MUIC_IRQ_INT2_CHGTYP: case MAX77693_MUIC_IRQ_INT2_CHGDETREUN: @@ -555,15 +949,7 @@ static void max77693_muic_irq_work(struct work_struct *work) case MAX77693_MUIC_IRQ_INT2_VBVOLT: case MAX77693_MUIC_IRQ_INT2_VIDRM: /* Handle charger accessory */ - curr_chg_type = info->status[1] & STATUS2_CHGTYP_MASK; - curr_chg_type >>= STATUS2_CHGTYP_SHIFT; - - /* Check charger accessory state which - is either detached or attached */ - if (curr_chg_type == MAX77693_CHARGER_TYPE_NONE) - attached = false; - - ret = max77693_muic_chg_handler(info, curr_chg_type, attached); + ret = max77693_muic_chg_handler(info); break; case MAX77693_MUIC_IRQ_INT3_EOC: case MAX77693_MUIC_IRQ_INT3_CGMBC: @@ -575,7 +961,8 @@ static void max77693_muic_irq_work(struct work_struct *work) default: dev_err(info->dev, "muic interrupt: irq %d occurred\n", irq_type); - break; + mutex_unlock(&info->mutex); + return; } if (ret < 0) @@ -604,7 +991,9 @@ static struct regmap_config max77693_muic_regmap_config = { static int max77693_muic_detect_accessory(struct max77693_muic_info *info) { int ret = 0; - int adc, chg_type; + int adc; + int chg_type; + bool attached; mutex_lock(&info->mutex); @@ -617,35 +1006,39 @@ static int max77693_muic_detect_accessory(struct max77693_muic_info *info) return -EINVAL; } - adc = info->status[0] & STATUS1_ADC_MASK; - adc >>= STATUS1_ADC_SHIFT; - - if (adc != MAX77693_MUIC_ADC_OPEN) { - dev_info(info->dev, - "external connector is attached (adc:0x%02x)\n", adc); + adc = max77693_muic_get_cable_type(info, MAX77693_CABLE_GROUP_ADC, + &attached); + if (attached && adc != MAX77693_MUIC_ADC_OPEN) { + ret = max77693_muic_adc_handler(info); + if (ret < 0) { + dev_err(info->dev, "Cannot detect accessory\n"); + mutex_unlock(&info->mutex); + return ret; + } + } - ret = max77693_muic_adc_handler(info, adc, true); - if (ret < 0) - dev_err(info->dev, "failed to detect accessory\n"); - goto out; + chg_type = max77693_muic_get_cable_type(info, MAX77693_CABLE_GROUP_CHG, + &attached); + if (attached && chg_type != MAX77693_CHARGER_TYPE_NONE) { + ret = max77693_muic_chg_handler(info); + if (ret < 0) { + dev_err(info->dev, "Cannot detect charger accessory\n"); + mutex_unlock(&info->mutex); + return ret; + } } - chg_type = info->status[1] & STATUS2_CHGTYP_MASK; - chg_type >>= STATUS2_CHGTYP_SHIFT; + mutex_unlock(&info->mutex); - if (chg_type != MAX77693_CHARGER_TYPE_NONE) { - dev_info(info->dev, - "external connector is attached (chg_type:0x%x)\n", - chg_type); + return 0; +} - max77693_muic_chg_handler(info, chg_type, true); - if (ret < 0) - dev_err(info->dev, "failed to detect charger accessory\n"); - } +static void max77693_muic_detect_cable_wq(struct work_struct *work) +{ + struct max77693_muic_info *info = container_of(to_delayed_work(work), + struct max77693_muic_info, wq_detcable); -out: - mutex_unlock(&info->mutex); - return ret; + max77693_muic_detect_accessory(info); } static int max77693_muic_probe(struct platform_device *pdev) @@ -654,7 +1047,9 @@ static int max77693_muic_probe(struct platform_device *pdev) struct max77693_platform_data *pdata = dev_get_platdata(max77693->dev); struct max77693_muic_platform_data *muic_pdata = pdata->muic_data; struct max77693_muic_info *info; - int ret, i; + int delay_jiffies; + int ret; + int i; u8 id; info = devm_kzalloc(&pdev->dev, sizeof(struct max77693_muic_info), @@ -678,6 +1073,32 @@ static int max77693_muic_probe(struct platform_device *pdev) return ret; } } + + /* Register input device for button of dock device */ + info->dock = devm_input_allocate_device(&pdev->dev); + if (!info->dock) { + dev_err(&pdev->dev, "%s: failed to allocate input\n", __func__); + return -ENOMEM; + } + info->dock->name = "max77693-muic/dock"; + info->dock->phys = "max77693-muic/extcon"; + info->dock->dev.parent = &pdev->dev; + + __set_bit(EV_REP, info->dock->evbit); + + input_set_capability(info->dock, EV_KEY, KEY_VOLUMEUP); + input_set_capability(info->dock, EV_KEY, KEY_VOLUMEDOWN); + input_set_capability(info->dock, EV_KEY, KEY_PLAYPAUSE); + input_set_capability(info->dock, EV_KEY, KEY_PREVIOUSSONG); + input_set_capability(info->dock, EV_KEY, KEY_NEXTSONG); + + ret = input_register_device(info->dock); + if (ret < 0) { + dev_err(&pdev->dev, "Cannot register input device error(%d)\n", + ret); + return ret; + } + platform_set_drvdata(pdev, info); mutex_init(&info->mutex); @@ -697,13 +1118,13 @@ static int max77693_muic_probe(struct platform_device *pdev) ret = request_threaded_irq(virq, NULL, max77693_muic_irq_handler, - IRQF_ONESHOT, muic_irq->name, info); + IRQF_NO_SUSPEND, + muic_irq->name, info); if (ret) { dev_err(&pdev->dev, "failed: irq request (IRQ: %d," " error :%d)\n", muic_irq->irq, ret); - goto err_irq; } } @@ -749,23 +1170,54 @@ static int max77693_muic_probe(struct platform_device *pdev) = muic_pdata->init_data[i].data; } + /* + * Default usb/uart path whether UART/USB or AUX_UART/AUX_USB + * h/w path of COMP2/COMN1 on CONTROL1 register. + */ + if (muic_pdata->path_uart) + info->path_uart = muic_pdata->path_uart; + else + info->path_uart = CONTROL1_SW_UART; + + if (muic_pdata->path_usb) + info->path_usb = muic_pdata->path_usb; + else + info->path_usb = CONTROL1_SW_USB; + + /* Set initial path for UART */ + max77693_muic_set_path(info, info->path_uart, true); + /* Check revision number of MUIC device*/ ret = max77693_read_reg(info->max77693->regmap_muic, MAX77693_MUIC_REG_ID, &id); if (ret < 0) { dev_err(&pdev->dev, "failed to read revision number\n"); - goto err_irq; + goto err_extcon; } dev_info(info->dev, "device ID : 0x%x\n", id); /* Set ADC debounce time */ max77693_muic_set_debounce_time(info, ADC_DEBOUNCE_TIME_25MS); - /* Detect accessory on boot */ - max77693_muic_detect_accessory(info); + /* + * Detect accessory after completing the initialization of platform + * + * - Use delayed workqueue to detect cable state and then + * notify cable state to notifiee/platform through uevent. + * After completing the booting of platform, the extcon provider + * driver should notify cable state to upper layer. + */ + INIT_DELAYED_WORK(&info->wq_detcable, max77693_muic_detect_cable_wq); + if (muic_pdata->detcable_delay_ms) + delay_jiffies = msecs_to_jiffies(muic_pdata->detcable_delay_ms); + else + delay_jiffies = msecs_to_jiffies(DELAY_MS_DEFAULT); + schedule_delayed_work(&info->wq_detcable, delay_jiffies); return ret; +err_extcon: + extcon_dev_unregister(info->edev); err_irq: while (--i >= 0) free_irq(muic_irqs[i].virq, info); @@ -780,6 +1232,7 @@ static int max77693_muic_remove(struct platform_device *pdev) for (i = 0; i < ARRAY_SIZE(muic_irqs); i++) free_irq(muic_irqs[i].virq, info); cancel_work_sync(&info->irq_work); + input_unregister_device(info->dock); extcon_dev_unregister(info->edev); return 0; diff --git a/drivers/extcon/extcon-max8997.c b/drivers/extcon/extcon-max8997.c index 93009fe6ef05..e636d950ad6c 100644 --- a/drivers/extcon/extcon-max8997.c +++ b/drivers/extcon/extcon-max8997.c @@ -29,51 +29,14 @@ #include <linux/irqdomain.h> #define DEV_NAME "max8997-muic" +#define DELAY_MS_DEFAULT 20000 /* unit: millisecond */ -/* MAX8997-MUIC STATUS1 register */ -#define STATUS1_ADC_SHIFT 0 -#define STATUS1_ADCLOW_SHIFT 5 -#define STATUS1_ADCERR_SHIFT 6 -#define STATUS1_ADC_MASK (0x1f << STATUS1_ADC_SHIFT) -#define STATUS1_ADCLOW_MASK (0x1 << STATUS1_ADCLOW_SHIFT) -#define STATUS1_ADCERR_MASK (0x1 << STATUS1_ADCERR_SHIFT) - -/* MAX8997-MUIC STATUS2 register */ -#define STATUS2_CHGTYP_SHIFT 0 -#define STATUS2_CHGDETRUN_SHIFT 3 -#define STATUS2_DCDTMR_SHIFT 4 -#define STATUS2_DBCHG_SHIFT 5 -#define STATUS2_VBVOLT_SHIFT 6 -#define STATUS2_CHGTYP_MASK (0x7 << STATUS2_CHGTYP_SHIFT) -#define STATUS2_CHGDETRUN_MASK (0x1 << STATUS2_CHGDETRUN_SHIFT) -#define STATUS2_DCDTMR_MASK (0x1 << STATUS2_DCDTMR_SHIFT) -#define STATUS2_DBCHG_MASK (0x1 << STATUS2_DBCHG_SHIFT) -#define STATUS2_VBVOLT_MASK (0x1 << STATUS2_VBVOLT_SHIFT) - -/* MAX8997-MUIC STATUS3 register */ -#define STATUS3_OVP_SHIFT 2 -#define STATUS3_OVP_MASK (0x1 << STATUS3_OVP_SHIFT) - -/* MAX8997-MUIC CONTROL1 register */ -#define COMN1SW_SHIFT 0 -#define COMP2SW_SHIFT 3 -#define COMN1SW_MASK (0x7 << COMN1SW_SHIFT) -#define COMP2SW_MASK (0x7 << COMP2SW_SHIFT) -#define SW_MASK (COMP2SW_MASK | COMN1SW_MASK) - -#define MAX8997_SW_USB ((1 << COMP2SW_SHIFT) | (1 << COMN1SW_SHIFT)) -#define MAX8997_SW_AUDIO ((2 << COMP2SW_SHIFT) | (2 << COMN1SW_SHIFT)) -#define MAX8997_SW_UART ((3 << COMP2SW_SHIFT) | (3 << COMN1SW_SHIFT)) -#define MAX8997_SW_OPEN ((0 << COMP2SW_SHIFT) | (0 << COMN1SW_SHIFT)) - -#define MAX8997_ADC_GROUND 0x00 -#define MAX8997_ADC_MHL 0x01 -#define MAX8997_ADC_JIG_USB_1 0x18 -#define MAX8997_ADC_JIG_USB_2 0x19 -#define MAX8997_ADC_DESKDOCK 0x1a -#define MAX8997_ADC_JIG_UART 0x1c -#define MAX8997_ADC_CARDOCK 0x1d -#define MAX8997_ADC_OPEN 0x1f +enum max8997_muic_adc_debounce_time { + ADC_DEBOUNCE_TIME_0_5MS = 0, /* 0.5ms */ + ADC_DEBOUNCE_TIME_10MS, /* 10ms */ + ADC_DEBOUNCE_TIME_25MS, /* 25ms */ + ADC_DEBOUNCE_TIME_38_62MS, /* 38.62ms */ +}; struct max8997_muic_irq { unsigned int irq; @@ -82,61 +45,303 @@ struct max8997_muic_irq { }; static struct max8997_muic_irq muic_irqs[] = { - { MAX8997_MUICIRQ_ADCError, "muic-ADC_error" }, - { MAX8997_MUICIRQ_ADCLow, "muic-ADC_low" }, - { MAX8997_MUICIRQ_ADC, "muic-ADC" }, - { MAX8997_MUICIRQ_VBVolt, "muic-VB_voltage" }, - { MAX8997_MUICIRQ_DBChg, "muic-DB_charger" }, - { MAX8997_MUICIRQ_DCDTmr, "muic-DCD_timer" }, - { MAX8997_MUICIRQ_ChgDetRun, "muic-CDR_status" }, - { MAX8997_MUICIRQ_ChgTyp, "muic-charger_type" }, - { MAX8997_MUICIRQ_OVP, "muic-over_voltage" }, + { MAX8997_MUICIRQ_ADCError, "muic-ADCERROR" }, + { MAX8997_MUICIRQ_ADCLow, "muic-ADCLOW" }, + { MAX8997_MUICIRQ_ADC, "muic-ADC" }, + { MAX8997_MUICIRQ_VBVolt, "muic-VBVOLT" }, + { MAX8997_MUICIRQ_DBChg, "muic-DBCHG" }, + { MAX8997_MUICIRQ_DCDTmr, "muic-DCDTMR" }, + { MAX8997_MUICIRQ_ChgDetRun, "muic-CHGDETRUN" }, + { MAX8997_MUICIRQ_ChgTyp, "muic-CHGTYP" }, + { MAX8997_MUICIRQ_OVP, "muic-OVP" }, +}; + +/* Define supported cable type */ +enum max8997_muic_acc_type { + MAX8997_MUIC_ADC_GROUND = 0x0, + MAX8997_MUIC_ADC_MHL, /* MHL*/ + MAX8997_MUIC_ADC_REMOTE_S1_BUTTON, + MAX8997_MUIC_ADC_REMOTE_S2_BUTTON, + MAX8997_MUIC_ADC_REMOTE_S3_BUTTON, + MAX8997_MUIC_ADC_REMOTE_S4_BUTTON, + MAX8997_MUIC_ADC_REMOTE_S5_BUTTON, + MAX8997_MUIC_ADC_REMOTE_S6_BUTTON, + MAX8997_MUIC_ADC_REMOTE_S7_BUTTON, + MAX8997_MUIC_ADC_REMOTE_S8_BUTTON, + MAX8997_MUIC_ADC_REMOTE_S9_BUTTON, + MAX8997_MUIC_ADC_REMOTE_S10_BUTTON, + MAX8997_MUIC_ADC_REMOTE_S11_BUTTON, + MAX8997_MUIC_ADC_REMOTE_S12_BUTTON, + MAX8997_MUIC_ADC_RESERVED_ACC_1, + MAX8997_MUIC_ADC_RESERVED_ACC_2, + MAX8997_MUIC_ADC_RESERVED_ACC_3, + MAX8997_MUIC_ADC_RESERVED_ACC_4, + MAX8997_MUIC_ADC_RESERVED_ACC_5, + MAX8997_MUIC_ADC_CEA936_AUDIO, + MAX8997_MUIC_ADC_PHONE_POWERED_DEV, + MAX8997_MUIC_ADC_TTY_CONVERTER, + MAX8997_MUIC_ADC_UART_CABLE, + MAX8997_MUIC_ADC_CEA936A_TYPE1_CHG, + MAX8997_MUIC_ADC_FACTORY_MODE_USB_OFF, /* JIG-USB-OFF */ + MAX8997_MUIC_ADC_FACTORY_MODE_USB_ON, /* JIG-USB-ON */ + MAX8997_MUIC_ADC_AV_CABLE_NOLOAD, /* DESKDOCK */ + MAX8997_MUIC_ADC_CEA936A_TYPE2_CHG, + MAX8997_MUIC_ADC_FACTORY_MODE_UART_OFF, /* JIG-UART */ + MAX8997_MUIC_ADC_FACTORY_MODE_UART_ON, /* CARDOCK */ + MAX8997_MUIC_ADC_AUDIO_MODE_REMOTE, + MAX8997_MUIC_ADC_OPEN, /* OPEN */ +}; + +enum max8997_muic_cable_group { + MAX8997_CABLE_GROUP_ADC = 0, + MAX8997_CABLE_GROUP_ADC_GND, + MAX8997_CABLE_GROUP_CHG, + MAX8997_CABLE_GROUP_VBVOLT, +}; + +enum max8997_muic_usb_type { + MAX8997_USB_HOST, + MAX8997_USB_DEVICE, +}; + +enum max8997_muic_charger_type { + MAX8997_CHARGER_TYPE_NONE = 0, + MAX8997_CHARGER_TYPE_USB, + MAX8997_CHARGER_TYPE_DOWNSTREAM_PORT, + MAX8997_CHARGER_TYPE_DEDICATED_CHG, + MAX8997_CHARGER_TYPE_500MA, + MAX8997_CHARGER_TYPE_1A, + MAX8997_CHARGER_TYPE_DEAD_BATTERY = 7, }; struct max8997_muic_info { struct device *dev; struct i2c_client *muic; - struct max8997_muic_platform_data *muic_pdata; + struct extcon_dev *edev; + int prev_cable_type; + int prev_chg_type; + u8 status[2]; int irq; struct work_struct irq_work; + struct mutex mutex; + struct max8997_muic_platform_data *muic_pdata; enum max8997_muic_charger_type pre_charger_type; - int pre_adc; - struct mutex mutex; + /* + * Use delayed workqueue to detect cable state and then + * notify cable state to notifiee/platform through uevent. + * After completing the booting of platform, the extcon provider + * driver should notify cable state to upper layer. + */ + struct delayed_work wq_detcable; + + /* + * Default usb/uart path whether UART/USB or AUX_UART/AUX_USB + * h/w path of COMP2/COMN1 on CONTROL1 register. + */ + int path_usb; + int path_uart; +}; - struct extcon_dev *edev; +enum { + EXTCON_CABLE_USB = 0, + EXTCON_CABLE_USB_HOST, + EXTCON_CABLE_TA, + EXTCON_CABLE_FAST_CHARGER, + EXTCON_CABLE_SLOW_CHARGER, + EXTCON_CABLE_CHARGE_DOWNSTREAM, + EXTCON_CABLE_MHL, + EXTCON_CABLE_DOCK_DESK, + EXTCON_CABLE_DOCK_CARD, + EXTCON_CABLE_JIG, + + _EXTCON_CABLE_NUM, }; -const char *max8997_extcon_cable[] = { - [0] = "USB", - [1] = "USB-Host", - [2] = "TA", - [3] = "Fast-charger", - [4] = "Slow-charger", - [5] = "Charge-downstream", - [6] = "MHL", - [7] = "Dock-desk", - [8] = "Dock-card", - [9] = "JIG", +static const char *max8997_extcon_cable[] = { + [EXTCON_CABLE_USB] = "USB", + [EXTCON_CABLE_USB_HOST] = "USB-Host", + [EXTCON_CABLE_TA] = "TA", + [EXTCON_CABLE_FAST_CHARGER] = "Fast-charger", + [EXTCON_CABLE_SLOW_CHARGER] = "Slow-charger", + [EXTCON_CABLE_CHARGE_DOWNSTREAM] = "Charge-downstream", + [EXTCON_CABLE_MHL] = "MHL", + [EXTCON_CABLE_DOCK_DESK] = "Dock-Desk", + [EXTCON_CABLE_DOCK_CARD] = "Dock-Card", + [EXTCON_CABLE_JIG] = "JIG", NULL, }; +/* + * max8997_muic_set_debounce_time - Set the debounce time of ADC + * @info: the instance including private data of max8997 MUIC + * @time: the debounce time of ADC + */ +static int max8997_muic_set_debounce_time(struct max8997_muic_info *info, + enum max8997_muic_adc_debounce_time time) +{ + int ret; + + switch (time) { + case ADC_DEBOUNCE_TIME_0_5MS: + case ADC_DEBOUNCE_TIME_10MS: + case ADC_DEBOUNCE_TIME_25MS: + case ADC_DEBOUNCE_TIME_38_62MS: + ret = max8997_update_reg(info->muic, + MAX8997_MUIC_REG_CONTROL3, + time << CONTROL3_ADCDBSET_SHIFT, + CONTROL3_ADCDBSET_MASK); + if (ret) { + dev_err(info->dev, "failed to set ADC debounce time\n"); + return -EAGAIN; + } + break; + default: + dev_err(info->dev, "invalid ADC debounce time\n"); + return -EINVAL; + } + + return 0; +}; + +/* + * max8997_muic_set_path - Set hardware line according to attached cable + * @info: the instance including private data of max8997 MUIC + * @value: the path according to attached cable + * @attached: the state of cable (true:attached, false:detached) + * + * The max8997 MUIC device share outside H/W line among a varity of cables, + * so this function set internal path of H/W line according to the type of + * attached cable. + */ +static int max8997_muic_set_path(struct max8997_muic_info *info, + u8 val, bool attached) +{ + int ret = 0; + u8 ctrl1, ctrl2 = 0; + + if (attached) + ctrl1 = val; + else + ctrl1 = CONTROL1_SW_OPEN; + + ret = max8997_update_reg(info->muic, + MAX8997_MUIC_REG_CONTROL1, ctrl1, COMP_SW_MASK); + if (ret < 0) { + dev_err(info->dev, "failed to update MUIC register\n"); + return -EAGAIN; + } + + if (attached) + ctrl2 |= CONTROL2_CPEN_MASK; /* LowPwr=0, CPEn=1 */ + else + ctrl2 |= CONTROL2_LOWPWR_MASK; /* LowPwr=1, CPEn=0 */ + + ret = max8997_update_reg(info->muic, + MAX8997_MUIC_REG_CONTROL2, ctrl2, + CONTROL2_LOWPWR_MASK | CONTROL2_CPEN_MASK); + if (ret < 0) { + dev_err(info->dev, "failed to update MUIC register\n"); + return -EAGAIN; + } + + dev_info(info->dev, + "CONTROL1 : 0x%02x, CONTROL2 : 0x%02x, state : %s\n", + ctrl1, ctrl2, attached ? "attached" : "detached"); + + return 0; +} + +/* + * max8997_muic_get_cable_type - Return cable type and check cable state + * @info: the instance including private data of max8997 MUIC + * @group: the path according to attached cable + * @attached: store cable state and return + * + * This function check the cable state either attached or detached, + * and then divide precise type of cable according to cable group. + * - MAX8997_CABLE_GROUP_ADC + * - MAX8997_CABLE_GROUP_CHG + */ +static int max8997_muic_get_cable_type(struct max8997_muic_info *info, + enum max8997_muic_cable_group group, bool *attached) +{ + int cable_type = 0; + int adc; + int chg_type; + + switch (group) { + case MAX8997_CABLE_GROUP_ADC: + /* + * Read ADC value to check cable type and decide cable state + * according to cable type + */ + adc = info->status[0] & STATUS1_ADC_MASK; + adc >>= STATUS1_ADC_SHIFT; + + /* + * Check current cable state/cable type and store cable type + * (info->prev_cable_type) for handling cable when cable is + * detached. + */ + if (adc == MAX8997_MUIC_ADC_OPEN) { + *attached = false; + + cable_type = info->prev_cable_type; + info->prev_cable_type = MAX8997_MUIC_ADC_OPEN; + } else { + *attached = true; + + cable_type = info->prev_cable_type = adc; + } + break; + case MAX8997_CABLE_GROUP_CHG: + /* + * Read charger type to check cable type and decide cable state + * according to type of charger cable. + */ + chg_type = info->status[1] & STATUS2_CHGTYP_MASK; + chg_type >>= STATUS2_CHGTYP_SHIFT; + + if (chg_type == MAX8997_CHARGER_TYPE_NONE) { + *attached = false; + + cable_type = info->prev_chg_type; + info->prev_chg_type = MAX8997_CHARGER_TYPE_NONE; + } else { + *attached = true; + + /* + * Check current cable state/cable type and store cable + * type(info->prev_chg_type) for handling cable when + * charger cable is detached. + */ + cable_type = info->prev_chg_type = chg_type; + } + + break; + default: + dev_err(info->dev, "Unknown cable group (%d)\n", group); + cable_type = -EINVAL; + break; + } + + return cable_type; +} + static int max8997_muic_handle_usb(struct max8997_muic_info *info, enum max8997_muic_usb_type usb_type, bool attached) { int ret = 0; if (usb_type == MAX8997_USB_HOST) { - /* switch to USB */ - ret = max8997_update_reg(info->muic, MAX8997_MUIC_REG_CONTROL1, - attached ? MAX8997_SW_USB : MAX8997_SW_OPEN, - SW_MASK); - if (ret) { + ret = max8997_muic_set_path(info, info->path_usb, attached); + if (ret < 0) { dev_err(info->dev, "failed to update muic register\n"); - goto out; + return ret; } } @@ -148,41 +353,39 @@ static int max8997_muic_handle_usb(struct max8997_muic_info *info, extcon_set_cable_state(info->edev, "USB", attached); break; default: - ret = -EINVAL; - break; + dev_err(info->dev, "failed to detect %s usb cable\n", + attached ? "attached" : "detached"); + return -EINVAL; } -out: - return ret; + return 0; } static int max8997_muic_handle_dock(struct max8997_muic_info *info, - int adc, bool attached) + int cable_type, bool attached) { int ret = 0; - /* switch to AUDIO */ - ret = max8997_update_reg(info->muic, MAX8997_MUIC_REG_CONTROL1, - attached ? MAX8997_SW_AUDIO : MAX8997_SW_OPEN, - SW_MASK); + ret = max8997_muic_set_path(info, CONTROL1_SW_AUDIO, attached); if (ret) { dev_err(info->dev, "failed to update muic register\n"); - goto out; + return ret; } - switch (adc) { - case MAX8997_ADC_DESKDOCK: + switch (cable_type) { + case MAX8997_MUIC_ADC_AV_CABLE_NOLOAD: extcon_set_cable_state(info->edev, "Dock-desk", attached); break; - case MAX8997_ADC_CARDOCK: + case MAX8997_MUIC_ADC_FACTORY_MODE_UART_ON: extcon_set_cable_state(info->edev, "Dock-card", attached); break; default: - ret = -EINVAL; - break; + dev_err(info->dev, "failed to detect %s dock device\n", + attached ? "attached" : "detached"); + return -EINVAL; } -out: - return ret; + + return 0; } static int max8997_muic_handle_jig_uart(struct max8997_muic_info *info, @@ -191,199 +394,188 @@ static int max8997_muic_handle_jig_uart(struct max8997_muic_info *info, int ret = 0; /* switch to UART */ - ret = max8997_update_reg(info->muic, MAX8997_MUIC_REG_CONTROL1, - attached ? MAX8997_SW_UART : MAX8997_SW_OPEN, - SW_MASK); + ret = max8997_muic_set_path(info, info->path_uart, attached); if (ret) { dev_err(info->dev, "failed to update muic register\n"); - goto out; + return -EINVAL; } extcon_set_cable_state(info->edev, "JIG", attached); -out: - return ret; -} - -static int max8997_muic_handle_adc_detach(struct max8997_muic_info *info) -{ - int ret = 0; - switch (info->pre_adc) { - case MAX8997_ADC_GROUND: - ret = max8997_muic_handle_usb(info, MAX8997_USB_HOST, false); - break; - case MAX8997_ADC_MHL: - extcon_set_cable_state(info->edev, "MHL", false); - break; - case MAX8997_ADC_JIG_USB_1: - case MAX8997_ADC_JIG_USB_2: - ret = max8997_muic_handle_usb(info, MAX8997_USB_DEVICE, false); - break; - case MAX8997_ADC_DESKDOCK: - case MAX8997_ADC_CARDOCK: - ret = max8997_muic_handle_dock(info, info->pre_adc, false); - break; - case MAX8997_ADC_JIG_UART: - ret = max8997_muic_handle_jig_uart(info, false); - break; - default: - break; - } - - return ret; + return 0; } -static int max8997_muic_handle_adc(struct max8997_muic_info *info, int adc) +static int max8997_muic_adc_handler(struct max8997_muic_info *info) { + int cable_type; + bool attached; int ret = 0; - switch (adc) { - case MAX8997_ADC_GROUND: - ret = max8997_muic_handle_usb(info, MAX8997_USB_HOST, true); - break; - case MAX8997_ADC_MHL: - extcon_set_cable_state(info->edev, "MHL", true); - break; - case MAX8997_ADC_JIG_USB_1: - case MAX8997_ADC_JIG_USB_2: - ret = max8997_muic_handle_usb(info, MAX8997_USB_DEVICE, true); - break; - case MAX8997_ADC_DESKDOCK: - case MAX8997_ADC_CARDOCK: - ret = max8997_muic_handle_dock(info, adc, true); - break; - case MAX8997_ADC_JIG_UART: - ret = max8997_muic_handle_jig_uart(info, true); - break; - case MAX8997_ADC_OPEN: - ret = max8997_muic_handle_adc_detach(info); - break; - default: - ret = -EINVAL; - goto out; - } - - info->pre_adc = adc; -out: - return ret; -} - -static int max8997_muic_handle_charger_type_detach( - struct max8997_muic_info *info) -{ - switch (info->pre_charger_type) { - case MAX8997_CHARGER_TYPE_USB: - extcon_set_cable_state(info->edev, "USB", false); - break; - case MAX8997_CHARGER_TYPE_DOWNSTREAM_PORT: - extcon_set_cable_state(info->edev, "Charge-downstream", false); - break; - case MAX8997_CHARGER_TYPE_DEDICATED_CHG: - extcon_set_cable_state(info->edev, "TA", false); - break; - case MAX8997_CHARGER_TYPE_500MA: - extcon_set_cable_state(info->edev, "Slow-charger", false); - break; - case MAX8997_CHARGER_TYPE_1A: - extcon_set_cable_state(info->edev, "Fast-charger", false); - break; + /* Check cable state which is either detached or attached */ + cable_type = max8997_muic_get_cable_type(info, + MAX8997_CABLE_GROUP_ADC, &attached); + + switch (cable_type) { + case MAX8997_MUIC_ADC_GROUND: + ret = max8997_muic_handle_usb(info, MAX8997_USB_HOST, attached); + if (ret < 0) + return ret; + break; + case MAX8997_MUIC_ADC_MHL: + extcon_set_cable_state(info->edev, "MHL", attached); + break; + case MAX8997_MUIC_ADC_FACTORY_MODE_USB_OFF: + case MAX8997_MUIC_ADC_FACTORY_MODE_USB_ON: + ret = max8997_muic_handle_usb(info, MAX8997_USB_DEVICE, attached); + if (ret < 0) + return ret; + break; + case MAX8997_MUIC_ADC_AV_CABLE_NOLOAD: + case MAX8997_MUIC_ADC_FACTORY_MODE_UART_ON: + ret = max8997_muic_handle_dock(info, cable_type, attached); + if (ret < 0) + return ret; + break; + case MAX8997_MUIC_ADC_FACTORY_MODE_UART_OFF: + ret = max8997_muic_handle_jig_uart(info, attached); + break; + case MAX8997_MUIC_ADC_REMOTE_S1_BUTTON: + case MAX8997_MUIC_ADC_REMOTE_S2_BUTTON: + case MAX8997_MUIC_ADC_REMOTE_S3_BUTTON: + case MAX8997_MUIC_ADC_REMOTE_S4_BUTTON: + case MAX8997_MUIC_ADC_REMOTE_S5_BUTTON: + case MAX8997_MUIC_ADC_REMOTE_S6_BUTTON: + case MAX8997_MUIC_ADC_REMOTE_S7_BUTTON: + case MAX8997_MUIC_ADC_REMOTE_S8_BUTTON: + case MAX8997_MUIC_ADC_REMOTE_S9_BUTTON: + case MAX8997_MUIC_ADC_REMOTE_S10_BUTTON: + case MAX8997_MUIC_ADC_REMOTE_S11_BUTTON: + case MAX8997_MUIC_ADC_REMOTE_S12_BUTTON: + case MAX8997_MUIC_ADC_RESERVED_ACC_1: + case MAX8997_MUIC_ADC_RESERVED_ACC_2: + case MAX8997_MUIC_ADC_RESERVED_ACC_3: + case MAX8997_MUIC_ADC_RESERVED_ACC_4: + case MAX8997_MUIC_ADC_RESERVED_ACC_5: + case MAX8997_MUIC_ADC_CEA936_AUDIO: + case MAX8997_MUIC_ADC_PHONE_POWERED_DEV: + case MAX8997_MUIC_ADC_TTY_CONVERTER: + case MAX8997_MUIC_ADC_UART_CABLE: + case MAX8997_MUIC_ADC_CEA936A_TYPE1_CHG: + case MAX8997_MUIC_ADC_CEA936A_TYPE2_CHG: + case MAX8997_MUIC_ADC_AUDIO_MODE_REMOTE: + /* + * This cable isn't used in general case if it is specially + * needed to detect additional cable, should implement + * proper operation when this cable is attached/detached. + */ + dev_info(info->dev, + "cable is %s but it isn't used (type:0x%x)\n", + attached ? "attached" : "detached", cable_type); + return -EAGAIN; default: + dev_err(info->dev, + "failed to detect %s unknown cable (type:0x%x)\n", + attached ? "attached" : "detached", cable_type); return -EINVAL; - break; } return 0; } -static int max8997_muic_handle_charger_type(struct max8997_muic_info *info, - enum max8997_muic_charger_type charger_type) +static int max8997_muic_chg_handler(struct max8997_muic_info *info) { - u8 adc; - int ret; + int chg_type; + bool attached; + int adc; - ret = max8997_read_reg(info->muic, MAX8997_MUIC_REG_STATUS1, &adc); - if (ret) { - dev_err(info->dev, "failed to read muic register\n"); - goto out; - } + chg_type = max8997_muic_get_cable_type(info, + MAX8997_CABLE_GROUP_CHG, &attached); - switch (charger_type) { + switch (chg_type) { case MAX8997_CHARGER_TYPE_NONE: - ret = max8997_muic_handle_charger_type_detach(info); break; case MAX8997_CHARGER_TYPE_USB: - if ((adc & STATUS1_ADC_MASK) == MAX8997_ADC_OPEN) { + adc = info->status[0] & STATUS1_ADC_MASK; + adc >>= STATUS1_ADC_SHIFT; + + if ((adc & STATUS1_ADC_MASK) == MAX8997_MUIC_ADC_OPEN) { max8997_muic_handle_usb(info, - MAX8997_USB_DEVICE, true); + MAX8997_USB_DEVICE, attached); } break; case MAX8997_CHARGER_TYPE_DOWNSTREAM_PORT: - extcon_set_cable_state(info->edev, "Charge-downstream", true); + extcon_set_cable_state(info->edev, "Charge-downstream", attached); break; case MAX8997_CHARGER_TYPE_DEDICATED_CHG: - extcon_set_cable_state(info->edev, "TA", true); + extcon_set_cable_state(info->edev, "TA", attached); break; case MAX8997_CHARGER_TYPE_500MA: - extcon_set_cable_state(info->edev, "Slow-charger", true); + extcon_set_cable_state(info->edev, "Slow-charger", attached); break; case MAX8997_CHARGER_TYPE_1A: - extcon_set_cable_state(info->edev, "Fast-charger", true); + extcon_set_cable_state(info->edev, "Fast-charger", attached); break; default: - ret = -EINVAL; - goto out; + dev_err(info->dev, + "failed to detect %s unknown chg cable (type:0x%x)\n", + attached ? "attached" : "detached", chg_type); + return -EINVAL; } - info->pre_charger_type = charger_type; -out: - return ret; + return 0; } static void max8997_muic_irq_work(struct work_struct *work) { struct max8997_muic_info *info = container_of(work, struct max8997_muic_info, irq_work); - u8 status[2]; - u8 adc, chg_type; int irq_type = 0; int i, ret; + if (!info->edev) + return; + mutex_lock(&info->mutex); + for (i = 0 ; i < ARRAY_SIZE(muic_irqs) ; i++) + if (info->irq == muic_irqs[i].virq) + irq_type = muic_irqs[i].irq; + ret = max8997_bulk_read(info->muic, MAX8997_MUIC_REG_STATUS1, - 2, status); + 2, info->status); if (ret) { dev_err(info->dev, "failed to read muic register\n"); mutex_unlock(&info->mutex); return; } - dev_dbg(info->dev, "%s: STATUS1:0x%x, 2:0x%x\n", __func__, - status[0], status[1]); - - for (i = 0 ; i < ARRAY_SIZE(muic_irqs) ; i++) - if (info->irq == muic_irqs[i].virq) - irq_type = muic_irqs[i].irq; - switch (irq_type) { + case MAX8997_MUICIRQ_ADCError: + case MAX8997_MUICIRQ_ADCLow: case MAX8997_MUICIRQ_ADC: - adc = status[0] & STATUS1_ADC_MASK; - adc >>= STATUS1_ADC_SHIFT; - - max8997_muic_handle_adc(info, adc); + /* Handle all of cable except for charger cable */ + ret = max8997_muic_adc_handler(info); break; + case MAX8997_MUICIRQ_VBVolt: + case MAX8997_MUICIRQ_DBChg: + case MAX8997_MUICIRQ_DCDTmr: + case MAX8997_MUICIRQ_ChgDetRun: case MAX8997_MUICIRQ_ChgTyp: - chg_type = status[1] & STATUS2_CHGTYP_MASK; - chg_type >>= STATUS2_CHGTYP_SHIFT; - - max8997_muic_handle_charger_type(info, chg_type); + /* Handle charger cable */ + ret = max8997_muic_chg_handler(info); + break; + case MAX8997_MUICIRQ_OVP: break; default: dev_info(info->dev, "misc interrupt: irq %d occurred\n", irq_type); - break; + mutex_unlock(&info->mutex); + return; } + if (ret < 0) + dev_err(info->dev, "failed to handle MUIC interrupt\n"); + mutex_unlock(&info->mutex); return; @@ -401,29 +593,60 @@ static irqreturn_t max8997_muic_irq_handler(int irq, void *data) return IRQ_HANDLED; } -static void max8997_muic_detect_dev(struct max8997_muic_info *info) +static int max8997_muic_detect_dev(struct max8997_muic_info *info) { - int ret; - u8 status[2], adc, chg_type; + int ret = 0; + int adc; + int chg_type; + bool attached; - ret = max8997_bulk_read(info->muic, MAX8997_MUIC_REG_STATUS1, - 2, status); + mutex_lock(&info->mutex); + + /* Read STATUSx register to detect accessory */ + ret = max8997_bulk_read(info->muic, + MAX8997_MUIC_REG_STATUS1, 2, info->status); if (ret) { - dev_err(info->dev, "failed to read muic register\n"); - return; + dev_err(info->dev, "failed to read MUIC register\n"); + mutex_unlock(&info->mutex); + return -EINVAL; } - dev_info(info->dev, "STATUS1:0x%x, STATUS2:0x%x\n", - status[0], status[1]); + adc = max8997_muic_get_cable_type(info, MAX8997_CABLE_GROUP_ADC, + &attached); + if (attached && adc != MAX8997_MUIC_ADC_OPEN) { + ret = max8997_muic_adc_handler(info); + if (ret < 0) { + dev_err(info->dev, "Cannot detect ADC cable\n"); + mutex_unlock(&info->mutex); + return ret; + } + } - adc = status[0] & STATUS1_ADC_MASK; - adc >>= STATUS1_ADC_SHIFT; + chg_type = max8997_muic_get_cable_type(info, MAX8997_CABLE_GROUP_CHG, + &attached); + if (attached && chg_type != MAX8997_CHARGER_TYPE_NONE) { + ret = max8997_muic_chg_handler(info); + if (ret < 0) { + dev_err(info->dev, "Cannot detect charger cable\n"); + mutex_unlock(&info->mutex); + return ret; + } + } + + mutex_unlock(&info->mutex); + + return 0; +} - chg_type = status[1] & STATUS2_CHGTYP_MASK; - chg_type >>= STATUS2_CHGTYP_SHIFT; +static void max8997_muic_detect_cable_wq(struct work_struct *work) +{ + struct max8997_muic_info *info = container_of(to_delayed_work(work), + struct max8997_muic_info, wq_detcable); + int ret; - max8997_muic_handle_adc(info, adc); - max8997_muic_handle_charger_type(info, chg_type); + ret = max8997_muic_detect_dev(info); + if (ret < 0) + pr_err("failed to detect cable type\n"); } static int max8997_muic_probe(struct platform_device *pdev) @@ -431,6 +654,7 @@ static int max8997_muic_probe(struct platform_device *pdev) struct max8997_dev *max8997 = dev_get_drvdata(pdev->dev.parent); struct max8997_platform_data *pdata = dev_get_platdata(max8997->dev); struct max8997_muic_info *info; + int delay_jiffies; int ret, i; info = devm_kzalloc(&pdev->dev, sizeof(struct max8997_muic_info), @@ -459,8 +683,10 @@ static int max8997_muic_probe(struct platform_device *pdev) } muic_irq->virq = virq; - ret = request_threaded_irq(virq, NULL, max8997_muic_irq_handler, - 0, muic_irq->name, info); + ret = request_threaded_irq(virq, NULL, + max8997_muic_irq_handler, + IRQF_NO_SUSPEND, + muic_irq->name, info); if (ret) { dev_err(&pdev->dev, "failed: irq request (IRQ: %d," @@ -496,10 +722,42 @@ static int max8997_muic_probe(struct platform_device *pdev) } } - /* Initial device detection */ - max8997_muic_detect_dev(info); + /* + * Default usb/uart path whether UART/USB or AUX_UART/AUX_USB + * h/w path of COMP2/COMN1 on CONTROL1 register. + */ + if (pdata->muic_pdata->path_uart) + info->path_uart = pdata->muic_pdata->path_uart; + else + info->path_uart = CONTROL1_SW_UART; + + if (pdata->muic_pdata->path_usb) + info->path_usb = pdata->muic_pdata->path_usb; + else + info->path_usb = CONTROL1_SW_USB; + + /* Set initial path for UART */ + max8997_muic_set_path(info, info->path_uart, true); + + /* Set ADC debounce time */ + max8997_muic_set_debounce_time(info, ADC_DEBOUNCE_TIME_25MS); + + /* + * Detect accessory after completing the initialization of platform + * + * - Use delayed workqueue to detect cable state and then + * notify cable state to notifiee/platform through uevent. + * After completing the booting of platform, the extcon provider + * driver should notify cable state to upper layer. + */ + INIT_DELAYED_WORK(&info->wq_detcable, max8997_muic_detect_cable_wq); + if (pdata->muic_pdata->detcable_delay_ms) + delay_jiffies = msecs_to_jiffies(pdata->muic_pdata->detcable_delay_ms); + else + delay_jiffies = msecs_to_jiffies(DELAY_MS_DEFAULT); + schedule_delayed_work(&info->wq_detcable, delay_jiffies); - return ret; + return 0; err_irq: while (--i >= 0) diff --git a/drivers/hid/hid-hyperv.c b/drivers/hid/hid-hyperv.c index 3d62781b8993..aa3fec0d9dc6 100644 --- a/drivers/hid/hid-hyperv.c +++ b/drivers/hid/hid-hyperv.c @@ -568,8 +568,7 @@ static int mousevsc_remove(struct hv_device *dev) static const struct hv_vmbus_device_id id_table[] = { /* Mouse guid */ - { VMBUS_DEVICE(0x9E, 0xB6, 0xA8, 0xCF, 0x4A, 0x5B, 0xc0, 0x4c, - 0xB9, 0x8B, 0x8B, 0xA1, 0xA1, 0xF3, 0xF9, 0x5A) }, + { HV_MOUSE_GUID, }, { }, }; diff --git a/drivers/hv/channel.c b/drivers/hv/channel.c index 773a2f25a8f0..0b122f8c7005 100644 --- a/drivers/hv/channel.c +++ b/drivers/hv/channel.c @@ -55,7 +55,7 @@ static void vmbus_setevent(struct vmbus_channel *channel) [channel->monitor_grp].pending); } else { - vmbus_set_event(channel->offermsg.child_relid); + vmbus_set_event(channel); } } @@ -181,7 +181,7 @@ int vmbus_open(struct vmbus_channel *newchannel, u32 send_ringbuffer_size, open_msg->ringbuffer_gpadlhandle = newchannel->ringbuffer_gpadlhandle; open_msg->downstream_ringbuffer_pageoffset = send_ringbuffer_size >> PAGE_SHIFT; - open_msg->server_contextarea_gpadlhandle = 0; + open_msg->target_vp = newchannel->target_vp; if (userdatalen > MAX_USER_DEFINED_BYTES) { err = -EINVAL; @@ -564,6 +564,7 @@ int vmbus_sendpacket(struct vmbus_channel *channel, const void *buffer, struct scatterlist bufferlist[3]; u64 aligned_data = 0; int ret; + bool signal = false; /* Setup the descriptor */ @@ -580,9 +581,9 @@ int vmbus_sendpacket(struct vmbus_channel *channel, const void *buffer, sg_set_buf(&bufferlist[2], &aligned_data, packetlen_aligned - packetlen); - ret = hv_ringbuffer_write(&channel->outbound, bufferlist, 3); + ret = hv_ringbuffer_write(&channel->outbound, bufferlist, 3, &signal); - if (ret == 0 && !hv_get_ringbuffer_interrupt_mask(&channel->outbound)) + if (ret == 0 && signal) vmbus_setevent(channel); return ret; @@ -606,6 +607,7 @@ int vmbus_sendpacket_pagebuffer(struct vmbus_channel *channel, u32 packetlen_aligned; struct scatterlist bufferlist[3]; u64 aligned_data = 0; + bool signal = false; if (pagecount > MAX_PAGE_BUFFER_COUNT) return -EINVAL; @@ -641,9 +643,9 @@ int vmbus_sendpacket_pagebuffer(struct vmbus_channel *channel, sg_set_buf(&bufferlist[2], &aligned_data, packetlen_aligned - packetlen); - ret = hv_ringbuffer_write(&channel->outbound, bufferlist, 3); + ret = hv_ringbuffer_write(&channel->outbound, bufferlist, 3, &signal); - if (ret == 0 && !hv_get_ringbuffer_interrupt_mask(&channel->outbound)) + if (ret == 0 && signal) vmbus_setevent(channel); return ret; @@ -665,6 +667,7 @@ int vmbus_sendpacket_multipagebuffer(struct vmbus_channel *channel, u32 packetlen_aligned; struct scatterlist bufferlist[3]; u64 aligned_data = 0; + bool signal = false; u32 pfncount = NUM_PAGES_SPANNED(multi_pagebuffer->offset, multi_pagebuffer->len); @@ -703,9 +706,9 @@ int vmbus_sendpacket_multipagebuffer(struct vmbus_channel *channel, sg_set_buf(&bufferlist[2], &aligned_data, packetlen_aligned - packetlen); - ret = hv_ringbuffer_write(&channel->outbound, bufferlist, 3); + ret = hv_ringbuffer_write(&channel->outbound, bufferlist, 3, &signal); - if (ret == 0 && !hv_get_ringbuffer_interrupt_mask(&channel->outbound)) + if (ret == 0 && signal) vmbus_setevent(channel); return ret; @@ -732,6 +735,7 @@ int vmbus_recvpacket(struct vmbus_channel *channel, void *buffer, u32 packetlen; u32 userlen; int ret; + bool signal = false; *buffer_actual_len = 0; *requestid = 0; @@ -758,8 +762,10 @@ int vmbus_recvpacket(struct vmbus_channel *channel, void *buffer, /* Copy over the packet to the user buffer */ ret = hv_ringbuffer_read(&channel->inbound, buffer, userlen, - (desc.offset8 << 3)); + (desc.offset8 << 3), &signal); + if (signal) + vmbus_setevent(channel); return 0; } @@ -774,8 +780,8 @@ int vmbus_recvpacket_raw(struct vmbus_channel *channel, void *buffer, { struct vmpacket_descriptor desc; u32 packetlen; - u32 userlen; int ret; + bool signal = false; *buffer_actual_len = 0; *requestid = 0; @@ -788,7 +794,6 @@ int vmbus_recvpacket_raw(struct vmbus_channel *channel, void *buffer, packetlen = desc.len8 << 3; - userlen = packetlen - (desc.offset8 << 3); *buffer_actual_len = packetlen; @@ -802,7 +807,11 @@ int vmbus_recvpacket_raw(struct vmbus_channel *channel, void *buffer, *requestid = desc.trans_id; /* Copy over the entire packet to the user buffer */ - ret = hv_ringbuffer_read(&channel->inbound, buffer, packetlen, 0); + ret = hv_ringbuffer_read(&channel->inbound, buffer, packetlen, 0, + &signal); + + if (signal) + vmbus_setevent(channel); return 0; } diff --git a/drivers/hv/channel_mgmt.c b/drivers/hv/channel_mgmt.c index 2f84c5cff8d4..53a8600162a5 100644 --- a/drivers/hv/channel_mgmt.c +++ b/drivers/hv/channel_mgmt.c @@ -257,6 +257,70 @@ static void vmbus_process_offer(struct work_struct *work) } } +enum { + IDE = 0, + SCSI, + NIC, + MAX_PERF_CHN, +}; + +/* + * This is an array of device_ids (device types) that are performance critical. + * We attempt to distribute the interrupt load for these devices across + * all available CPUs. + */ +static const struct hv_vmbus_device_id hp_devs[] = { + /* IDE */ + { HV_IDE_GUID, }, + /* Storage - SCSI */ + { HV_SCSI_GUID, }, + /* Network */ + { HV_NIC_GUID, }, +}; + + +/* + * We use this state to statically distribute the channel interrupt load. + */ +static u32 next_vp; + +/* + * Starting with Win8, we can statically distribute the incoming + * channel interrupt load by binding a channel to VCPU. We + * implement here a simple round robin scheme for distributing + * the interrupt load. + * We will bind channels that are not performance critical to cpu 0 and + * performance critical channels (IDE, SCSI and Network) will be uniformly + * distributed across all available CPUs. + */ +static u32 get_vp_index(uuid_le *type_guid) +{ + u32 cur_cpu; + int i; + bool perf_chn = false; + u32 max_cpus = num_online_cpus(); + + for (i = IDE; i < MAX_PERF_CHN; i++) { + if (!memcmp(type_guid->b, hp_devs[i].guid, + sizeof(uuid_le))) { + perf_chn = true; + break; + } + } + if ((vmbus_proto_version == VERSION_WS2008) || + (vmbus_proto_version == VERSION_WIN7) || (!perf_chn)) { + /* + * Prior to win8, all channel interrupts are + * delivered on cpu 0. + * Also if the channel is not a performance critical + * channel, bind it to cpu 0. + */ + return 0; + } + cur_cpu = (++next_vp % max_cpus); + return 0; +} + /* * vmbus_onoffer - Handler for channel offers from vmbus in parent partition. * @@ -275,6 +339,35 @@ static void vmbus_onoffer(struct vmbus_channel_message_header *hdr) return; } + /* + * By default we setup state to enable batched + * reading. A specific service can choose to + * disable this prior to opening the channel. + */ + newchannel->batched_reading = true; + + /* + * Setup state for signalling the host. + */ + newchannel->sig_event = (struct hv_input_signal_event *) + (ALIGN((unsigned long) + &newchannel->sig_buf, + HV_HYPERCALL_PARAM_ALIGN)); + + newchannel->sig_event->connectionid.asu32 = 0; + newchannel->sig_event->connectionid.u.id = VMBUS_EVENT_CONNECTION_ID; + newchannel->sig_event->flag_number = 0; + newchannel->sig_event->rsvdz = 0; + + if (vmbus_proto_version != VERSION_WS2008) { + newchannel->is_dedicated_interrupt = + (offer->is_dedicated_interrupt != 0); + newchannel->sig_event->connectionid.u.id = + offer->connection_id; + } + + newchannel->target_vp = get_vp_index(&offer->offer.if_type); + memcpy(&newchannel->offermsg, offer, sizeof(struct vmbus_channel_offer_channel)); newchannel->monitor_grp = (u8)offer->monitorid / 32; diff --git a/drivers/hv/connection.c b/drivers/hv/connection.c index 650c9f0b6642..253a74ba245c 100644 --- a/drivers/hv/connection.c +++ b/drivers/hv/connection.c @@ -30,6 +30,7 @@ #include <linux/slab.h> #include <linux/vmalloc.h> #include <linux/hyperv.h> +#include <linux/export.h> #include <asm/hyperv.h> #include "hyperv_vmbus.h" @@ -40,15 +41,99 @@ struct vmbus_connection vmbus_connection = { }; /* + * Negotiated protocol version with the host. + */ +__u32 vmbus_proto_version; +EXPORT_SYMBOL_GPL(vmbus_proto_version); + +static __u32 vmbus_get_next_version(__u32 current_version) +{ + switch (current_version) { + case (VERSION_WIN7): + return VERSION_WS2008; + + case (VERSION_WIN8): + return VERSION_WIN7; + + case (VERSION_WS2008): + default: + return VERSION_INVAL; + } +} + +static int vmbus_negotiate_version(struct vmbus_channel_msginfo *msginfo, + __u32 version) +{ + int ret = 0; + struct vmbus_channel_initiate_contact *msg; + unsigned long flags; + int t; + + init_completion(&msginfo->waitevent); + + msg = (struct vmbus_channel_initiate_contact *)msginfo->msg; + + msg->header.msgtype = CHANNELMSG_INITIATE_CONTACT; + msg->vmbus_version_requested = version; + msg->interrupt_page = virt_to_phys(vmbus_connection.int_page); + msg->monitor_page1 = virt_to_phys(vmbus_connection.monitor_pages); + msg->monitor_page2 = virt_to_phys( + (void *)((unsigned long)vmbus_connection.monitor_pages + + PAGE_SIZE)); + + /* + * Add to list before we send the request since we may + * receive the response before returning from this routine + */ + spin_lock_irqsave(&vmbus_connection.channelmsg_lock, flags); + list_add_tail(&msginfo->msglistentry, + &vmbus_connection.chn_msg_list); + + spin_unlock_irqrestore(&vmbus_connection.channelmsg_lock, flags); + + ret = vmbus_post_msg(msg, + sizeof(struct vmbus_channel_initiate_contact)); + if (ret != 0) { + spin_lock_irqsave(&vmbus_connection.channelmsg_lock, flags); + list_del(&msginfo->msglistentry); + spin_unlock_irqrestore(&vmbus_connection.channelmsg_lock, + flags); + return ret; + } + + /* Wait for the connection response */ + t = wait_for_completion_timeout(&msginfo->waitevent, 5*HZ); + if (t == 0) { + spin_lock_irqsave(&vmbus_connection.channelmsg_lock, + flags); + list_del(&msginfo->msglistentry); + spin_unlock_irqrestore(&vmbus_connection.channelmsg_lock, + flags); + return -ETIMEDOUT; + } + + spin_lock_irqsave(&vmbus_connection.channelmsg_lock, flags); + list_del(&msginfo->msglistentry); + spin_unlock_irqrestore(&vmbus_connection.channelmsg_lock, flags); + + /* Check if successful */ + if (msginfo->response.version_response.version_supported) { + vmbus_connection.conn_state = CONNECTED; + } else { + return -ECONNREFUSED; + } + + return ret; +} + +/* * vmbus_connect - Sends a connect request on the partition service connection */ int vmbus_connect(void) { int ret = 0; - int t; struct vmbus_channel_msginfo *msginfo = NULL; - struct vmbus_channel_initiate_contact *msg; - unsigned long flags; + __u32 version; /* Initialize the vmbus connection */ vmbus_connection.conn_state = CONNECTING; @@ -99,69 +184,38 @@ int vmbus_connect(void) goto cleanup; } - init_completion(&msginfo->waitevent); - - msg = (struct vmbus_channel_initiate_contact *)msginfo->msg; - - msg->header.msgtype = CHANNELMSG_INITIATE_CONTACT; - msg->vmbus_version_requested = VMBUS_REVISION_NUMBER; - msg->interrupt_page = virt_to_phys(vmbus_connection.int_page); - msg->monitor_page1 = virt_to_phys(vmbus_connection.monitor_pages); - msg->monitor_page2 = virt_to_phys( - (void *)((unsigned long)vmbus_connection.monitor_pages + - PAGE_SIZE)); - /* - * Add to list before we send the request since we may - * receive the response before returning from this routine + * Negotiate a compatible VMBUS version number with the + * host. We start with the highest number we can support + * and work our way down until we negotiate a compatible + * version. */ - spin_lock_irqsave(&vmbus_connection.channelmsg_lock, flags); - list_add_tail(&msginfo->msglistentry, - &vmbus_connection.chn_msg_list); - spin_unlock_irqrestore(&vmbus_connection.channelmsg_lock, flags); + version = VERSION_CURRENT; - ret = vmbus_post_msg(msg, - sizeof(struct vmbus_channel_initiate_contact)); - if (ret != 0) { - spin_lock_irqsave(&vmbus_connection.channelmsg_lock, flags); - list_del(&msginfo->msglistentry); - spin_unlock_irqrestore(&vmbus_connection.channelmsg_lock, - flags); - goto cleanup; - } + do { + ret = vmbus_negotiate_version(msginfo, version); + if (ret == 0) + break; - /* Wait for the connection response */ - t = wait_for_completion_timeout(&msginfo->waitevent, 5*HZ); - if (t == 0) { - spin_lock_irqsave(&vmbus_connection.channelmsg_lock, - flags); - list_del(&msginfo->msglistentry); - spin_unlock_irqrestore(&vmbus_connection.channelmsg_lock, - flags); - ret = -ETIMEDOUT; - goto cleanup; - } + version = vmbus_get_next_version(version); + } while (version != VERSION_INVAL); - spin_lock_irqsave(&vmbus_connection.channelmsg_lock, flags); - list_del(&msginfo->msglistentry); - spin_unlock_irqrestore(&vmbus_connection.channelmsg_lock, flags); - - /* Check if successful */ - if (msginfo->response.version_response.version_supported) { - vmbus_connection.conn_state = CONNECTED; - } else { - pr_err("Unable to connect, " - "Version %d not supported by Hyper-V\n", - VMBUS_REVISION_NUMBER); - ret = -ECONNREFUSED; + if (version == VERSION_INVAL) goto cleanup; - } + + vmbus_proto_version = version; + pr_info("Hyper-V Host Build:%d-%d.%d-%d-%d.%d; Vmbus version:%d.%d\n", + host_info_eax, host_info_ebx >> 16, + host_info_ebx & 0xFFFF, host_info_ecx, + host_info_edx >> 24, host_info_edx & 0xFFFFFF, + version >> 16, version & 0xFFFF); kfree(msginfo); return 0; cleanup: + pr_err("Unable to connect to host\n"); vmbus_connection.conn_state = DISCONNECTED; if (vmbus_connection.work_queue) @@ -212,6 +266,9 @@ static void process_chn_event(u32 relid) { struct vmbus_channel *channel; unsigned long flags; + void *arg; + bool read_state; + u32 bytes_to_read; /* * Find the channel based on this relid and invokes the @@ -234,10 +291,29 @@ static void process_chn_event(u32 relid) */ spin_lock_irqsave(&channel->inbound_lock, flags); - if (channel->onchannel_callback != NULL) - channel->onchannel_callback(channel->channel_callback_context); - else + if (channel->onchannel_callback != NULL) { + arg = channel->channel_callback_context; + read_state = channel->batched_reading; + /* + * This callback reads the messages sent by the host. + * We can optimize host to guest signaling by ensuring: + * 1. While reading the channel, we disable interrupts from + * host. + * 2. Ensure that we process all posted messages from the host + * before returning from this callback. + * 3. Once we return, enable signaling from the host. Once this + * state is set we check to see if additional packets are + * available to read. In this case we repeat the process. + */ + + do { + hv_begin_read(&channel->inbound); + channel->onchannel_callback(arg); + bytes_to_read = hv_end_read(&channel->inbound); + } while (read_state && (bytes_to_read != 0)); + } else { pr_err("no channel callback for relid - %u\n", relid); + } spin_unlock_irqrestore(&channel->inbound_lock, flags); } @@ -248,10 +324,32 @@ static void process_chn_event(u32 relid) void vmbus_on_event(unsigned long data) { u32 dword; - u32 maxdword = MAX_NUM_CHANNELS_SUPPORTED >> 5; + u32 maxdword; int bit; u32 relid; - u32 *recv_int_page = vmbus_connection.recv_int_page; + u32 *recv_int_page = NULL; + void *page_addr; + int cpu = smp_processor_id(); + union hv_synic_event_flags *event; + + if ((vmbus_proto_version == VERSION_WS2008) || + (vmbus_proto_version == VERSION_WIN7)) { + maxdword = MAX_NUM_CHANNELS_SUPPORTED >> 5; + recv_int_page = vmbus_connection.recv_int_page; + } else { + /* + * When the host is win8 and beyond, the event page + * can be directly checked to get the id of the channel + * that has the interrupt pending. + */ + maxdword = HV_EVENT_FLAGS_DWORD_COUNT; + page_addr = hv_context.synic_event_page[cpu]; + event = (union hv_synic_event_flags *)page_addr + + VMBUS_MESSAGE_SINT; + recv_int_page = event->flags32; + } + + /* Check events */ if (!recv_int_page) @@ -307,12 +405,16 @@ int vmbus_post_msg(void *buffer, size_t buflen) /* * vmbus_set_event - Send an event notification to the parent */ -int vmbus_set_event(u32 child_relid) +int vmbus_set_event(struct vmbus_channel *channel) { - /* Each u32 represents 32 channels */ - sync_set_bit(child_relid & 31, - (unsigned long *)vmbus_connection.send_int_page + - (child_relid >> 5)); + u32 child_relid = channel->offermsg.child_relid; + + if (!channel->is_dedicated_interrupt) { + /* Each u32 represents 32 channels */ + sync_set_bit(child_relid & 31, + (unsigned long *)vmbus_connection.send_int_page + + (child_relid >> 5)); + } - return hv_signal_event(); + return hv_signal_event(channel->sig_event); } diff --git a/drivers/hv/hv.c b/drivers/hv/hv.c index 3648f8f0f368..1c5481da6e4a 100644 --- a/drivers/hv/hv.c +++ b/drivers/hv/hv.c @@ -27,6 +27,7 @@ #include <linux/vmalloc.h> #include <linux/hyperv.h> #include <linux/version.h> +#include <linux/interrupt.h> #include <asm/hyperv.h> #include "hyperv_vmbus.h" @@ -34,13 +35,16 @@ struct hv_context hv_context = { .synic_initialized = false, .hypercall_page = NULL, - .signal_event_param = NULL, - .signal_event_buffer = NULL, }; /* * query_hypervisor_info - Get version info of the windows hypervisor */ +unsigned int host_info_eax; +unsigned int host_info_ebx; +unsigned int host_info_ecx; +unsigned int host_info_edx; + static int query_hypervisor_info(void) { unsigned int eax; @@ -70,13 +74,10 @@ static int query_hypervisor_info(void) edx = 0; op = HVCPUID_VERSION; cpuid(op, &eax, &ebx, &ecx, &edx); - pr_info("Hyper-V Host OS Build:%d-%d.%d-%d-%d.%d\n", - eax, - ebx >> 16, - ebx & 0xFFFF, - ecx, - edx >> 24, - edx & 0xFFFFFF); + host_info_eax = eax; + host_info_ebx = ebx; + host_info_ecx = ecx; + host_info_edx = edx; } return max_leaf; } @@ -137,6 +138,10 @@ int hv_init(void) memset(hv_context.synic_event_page, 0, sizeof(void *) * NR_CPUS); memset(hv_context.synic_message_page, 0, sizeof(void *) * NR_CPUS); + memset(hv_context.vp_index, 0, + sizeof(int) * NR_CPUS); + memset(hv_context.event_dpc, 0, + sizeof(void *) * NR_CPUS); max_leaf = query_hypervisor_info(); @@ -168,24 +173,6 @@ int hv_init(void) hv_context.hypercall_page = virtaddr; - /* Setup the global signal event param for the signal event hypercall */ - hv_context.signal_event_buffer = - kmalloc(sizeof(struct hv_input_signal_event_buffer), - GFP_KERNEL); - if (!hv_context.signal_event_buffer) - goto cleanup; - - hv_context.signal_event_param = - (struct hv_input_signal_event *) - (ALIGN((unsigned long) - hv_context.signal_event_buffer, - HV_HYPERCALL_PARAM_ALIGN)); - hv_context.signal_event_param->connectionid.asu32 = 0; - hv_context.signal_event_param->connectionid.u.id = - VMBUS_EVENT_CONNECTION_ID; - hv_context.signal_event_param->flag_number = 0; - hv_context.signal_event_param->rsvdz = 0; - return 0; cleanup: @@ -213,10 +200,6 @@ void hv_cleanup(void) /* Reset our OS id */ wrmsrl(HV_X64_MSR_GUEST_OS_ID, 0); - kfree(hv_context.signal_event_buffer); - hv_context.signal_event_buffer = NULL; - hv_context.signal_event_param = NULL; - if (hv_context.hypercall_page) { hypercall_msr.as_uint64 = 0; wrmsrl(HV_X64_MSR_HYPERCALL, hypercall_msr.as_uint64); @@ -273,13 +256,12 @@ int hv_post_message(union hv_connection_id connection_id, * * This involves a hypercall. */ -u16 hv_signal_event(void) +u16 hv_signal_event(void *con_id) { u16 status; - status = do_hypercall(HVCALL_SIGNAL_EVENT, - hv_context.signal_event_param, - NULL) & 0xFFFF; + status = (do_hypercall(HVCALL_SIGNAL_EVENT, con_id, NULL) & 0xFFFF); + return status; } @@ -297,6 +279,7 @@ void hv_synic_init(void *irqarg) union hv_synic_siefp siefp; union hv_synic_sint shared_sint; union hv_synic_scontrol sctrl; + u64 vp_index; u32 irq_vector = *((u32 *)(irqarg)); int cpu = smp_processor_id(); @@ -307,6 +290,15 @@ void hv_synic_init(void *irqarg) /* Check the version */ rdmsrl(HV_X64_MSR_SVERSION, version); + hv_context.event_dpc[cpu] = (struct tasklet_struct *) + kmalloc(sizeof(struct tasklet_struct), + GFP_ATOMIC); + if (hv_context.event_dpc[cpu] == NULL) { + pr_err("Unable to allocate event dpc\n"); + goto cleanup; + } + tasklet_init(hv_context.event_dpc[cpu], vmbus_on_event, cpu); + hv_context.synic_message_page[cpu] = (void *)get_zeroed_page(GFP_ATOMIC); @@ -345,7 +337,7 @@ void hv_synic_init(void *irqarg) shared_sint.as_uint64 = 0; shared_sint.vector = irq_vector; /* HV_SHARED_SINT_IDT_VECTOR + 0x20; */ shared_sint.masked = false; - shared_sint.auto_eoi = false; + shared_sint.auto_eoi = true; wrmsrl(HV_X64_MSR_SINT0 + VMBUS_MESSAGE_SINT, shared_sint.as_uint64); @@ -356,6 +348,14 @@ void hv_synic_init(void *irqarg) wrmsrl(HV_X64_MSR_SCONTROL, sctrl.as_uint64); hv_context.synic_initialized = true; + + /* + * Setup the mapping between Hyper-V's notion + * of cpuid and Linux' notion of cpuid. + * This array will be indexed using Linux cpuid. + */ + rdmsrl(HV_X64_MSR_VP_INDEX, vp_index); + hv_context.vp_index[cpu] = (u32)vp_index; return; cleanup: diff --git a/drivers/hv/hv_balloon.c b/drivers/hv/hv_balloon.c index dd289fd179ca..37873213e24f 100644 --- a/drivers/hv/hv_balloon.c +++ b/drivers/hv/hv_balloon.c @@ -29,7 +29,6 @@ #include <linux/memory_hotplug.h> #include <linux/memory.h> #include <linux/notifier.h> -#include <linux/mman.h> #include <linux/percpu_counter.h> #include <linux/hyperv.h> @@ -415,10 +414,17 @@ struct dm_info_msg { static bool hot_add; static bool do_hot_add; +/* + * Delay reporting memory pressure by + * the specified number of seconds. + */ +static uint pressure_report_delay = 30; module_param(hot_add, bool, (S_IRUGO | S_IWUSR)); MODULE_PARM_DESC(hot_add, "If set attempt memory hot_add"); +module_param(pressure_report_delay, uint, (S_IRUGO | S_IWUSR)); +MODULE_PARM_DESC(pressure_report_delay, "Delay in secs in reporting pressure"); static atomic_t trans_id = ATOMIC_INIT(0); static int dm_ring_size = (5 * PAGE_SIZE); @@ -517,6 +523,34 @@ static void process_info(struct hv_dynmem_device *dm, struct dm_info_msg *msg) } } +unsigned long compute_balloon_floor(void) +{ + unsigned long min_pages; +#define MB2PAGES(mb) ((mb) << (20 - PAGE_SHIFT)) + /* Simple continuous piecewiese linear function: + * max MiB -> min MiB gradient + * 0 0 + * 16 16 + * 32 24 + * 128 72 (1/2) + * 512 168 (1/4) + * 2048 360 (1/8) + * 8192 552 (1/32) + * 32768 1320 + * 131072 4392 + */ + if (totalram_pages < MB2PAGES(128)) + min_pages = MB2PAGES(8) + (totalram_pages >> 1); + else if (totalram_pages < MB2PAGES(512)) + min_pages = MB2PAGES(40) + (totalram_pages >> 2); + else if (totalram_pages < MB2PAGES(2048)) + min_pages = MB2PAGES(104) + (totalram_pages >> 3); + else + min_pages = MB2PAGES(296) + (totalram_pages >> 5); +#undef MB2PAGES + return min_pages; +} + /* * Post our status as it relates memory pressure to the * host. Host expects the guests to post this status @@ -530,15 +564,30 @@ static void process_info(struct hv_dynmem_device *dm, struct dm_info_msg *msg) static void post_status(struct hv_dynmem_device *dm) { struct dm_status status; + struct sysinfo val; - + if (pressure_report_delay > 0) { + --pressure_report_delay; + return; + } + si_meminfo(&val); memset(&status, 0, sizeof(struct dm_status)); status.hdr.type = DM_STATUS_REPORT; status.hdr.size = sizeof(struct dm_status); status.hdr.trans_id = atomic_inc_return(&trans_id); - - status.num_committed = vm_memory_committed(); + /* + * The host expects the guest to report free memory. + * Further, the host expects the pressure information to + * include the ballooned out pages. + * For a given amount of memory that we are managing, we + * need to compute a floor below which we should not balloon. + * Compute this and add it to the pressure report. + */ + status.num_avail = val.freeram; + status.num_committed = vm_memory_committed() + + dm->num_pages_ballooned + + compute_balloon_floor(); vmbus_sendpacket(dm->dev->channel, &status, sizeof(struct dm_status), @@ -547,8 +596,6 @@ static void post_status(struct hv_dynmem_device *dm) } - - static void free_balloon_pages(struct hv_dynmem_device *dm, union dm_mem_page_range *range_array) { @@ -1013,9 +1060,7 @@ static int balloon_remove(struct hv_device *dev) static const struct hv_vmbus_device_id id_table[] = { /* Dynamic Memory Class ID */ /* 525074DC-8985-46e2-8057-A307DC18A502 */ - { VMBUS_DEVICE(0xdc, 0x74, 0x50, 0X52, 0x85, 0x89, 0xe2, 0x46, - 0x80, 0x57, 0xa3, 0x07, 0xdc, 0x18, 0xa5, 0x02) - }, + { HV_DM_GUID, }, { }, }; diff --git a/drivers/hv/hv_util.c b/drivers/hv/hv_util.c index a0667de7a04c..1d4cbd8e8261 100644 --- a/drivers/hv/hv_util.c +++ b/drivers/hv/hv_util.c @@ -49,6 +49,16 @@ static struct hv_util_service util_kvp = { .util_deinit = hv_kvp_deinit, }; +static void perform_shutdown(struct work_struct *dummy) +{ + orderly_poweroff(true); +} + +/* + * Perform the shutdown operation in a thread context. + */ +static DECLARE_WORK(shutdown_work, perform_shutdown); + static void shutdown_onchannelcallback(void *context) { struct vmbus_channel *channel = context; @@ -106,7 +116,7 @@ static void shutdown_onchannelcallback(void *context) } if (execute_shutdown == true) - orderly_poweroff(true); + schedule_work(&shutdown_work); } /* @@ -274,6 +284,16 @@ static int util_probe(struct hv_device *dev, } } + /* + * The set of services managed by the util driver are not performance + * critical and do not need batched reading. Furthermore, some services + * such as KVP can only handle one message from the host at a time. + * Turn off batched reading for all util drivers before we open the + * channel. + */ + + set_channel_read_state(dev->channel, false); + ret = vmbus_open(dev->channel, 4 * PAGE_SIZE, 4 * PAGE_SIZE, NULL, 0, srv->util_cb, dev->channel); if (ret) @@ -304,21 +324,21 @@ static int util_remove(struct hv_device *dev) static const struct hv_vmbus_device_id id_table[] = { /* Shutdown guid */ - { VMBUS_DEVICE(0x31, 0x60, 0x0B, 0X0E, 0x13, 0x52, 0x34, 0x49, - 0x81, 0x8B, 0x38, 0XD9, 0x0C, 0xED, 0x39, 0xDB) - .driver_data = (unsigned long)&util_shutdown }, + { HV_SHUTDOWN_GUID, + .driver_data = (unsigned long)&util_shutdown + }, /* Time synch guid */ - { VMBUS_DEVICE(0x30, 0xe6, 0x27, 0x95, 0xae, 0xd0, 0x7b, 0x49, - 0xad, 0xce, 0xe8, 0x0a, 0xb0, 0x17, 0x5c, 0xaf) - .driver_data = (unsigned long)&util_timesynch }, + { HV_TS_GUID, + .driver_data = (unsigned long)&util_timesynch + }, /* Heartbeat guid */ - { VMBUS_DEVICE(0x39, 0x4f, 0x16, 0x57, 0x15, 0x91, 0x78, 0x4e, - 0xab, 0x55, 0x38, 0x2f, 0x3b, 0xd5, 0x42, 0x2d) - .driver_data = (unsigned long)&util_heartbeat }, + { HV_HEART_BEAT_GUID, + .driver_data = (unsigned long)&util_heartbeat + }, /* KVP guid */ - { VMBUS_DEVICE(0xe7, 0xf4, 0xa0, 0xa9, 0x45, 0x5a, 0x96, 0x4d, - 0xb8, 0x27, 0x8a, 0x84, 0x1e, 0x8c, 0x3, 0xe6) - .driver_data = (unsigned long)&util_kvp }, + { HV_KVP_GUID, + .driver_data = (unsigned long)&util_kvp + }, { }, }; diff --git a/drivers/hv/hyperv_vmbus.h b/drivers/hv/hyperv_vmbus.h index d8d1fadb398a..12f2f9e989f7 100644 --- a/drivers/hv/hyperv_vmbus.h +++ b/drivers/hv/hyperv_vmbus.h @@ -101,15 +101,6 @@ enum hv_message_type { /* Define invalid partition identifier. */ #define HV_PARTITION_ID_INVALID ((u64)0x0) -/* Define connection identifier type. */ -union hv_connection_id { - u32 asu32; - struct { - u32 id:24; - u32 reserved:8; - } u; -}; - /* Define port identifier type. */ union hv_port_id { u32 asu32; @@ -338,13 +329,6 @@ struct hv_input_post_message { u64 payload[HV_MESSAGE_PAYLOAD_QWORD_COUNT]; }; -/* Definition of the hv_signal_event hypercall input structure. */ -struct hv_input_signal_event { - union hv_connection_id connectionid; - u16 flag_number; - u16 rsvdz; -}; - /* * Versioning definitions used for guests reporting themselves to the * hypervisor, and visa versa. @@ -498,11 +482,6 @@ static const uuid_le VMBUS_SERVICE_ID = { -struct hv_input_signal_event_buffer { - u64 align8; - struct hv_input_signal_event event; -}; - struct hv_context { /* We only support running on top of Hyper-V * So at this point this really can only contain the Hyper-V ID @@ -513,16 +492,24 @@ struct hv_context { bool synic_initialized; - /* - * This is used as an input param to HvCallSignalEvent hypercall. The - * input param is immutable in our usage and must be dynamic mem (vs - * stack or global). */ - struct hv_input_signal_event_buffer *signal_event_buffer; - /* 8-bytes aligned of the buffer above */ - struct hv_input_signal_event *signal_event_param; - void *synic_message_page[NR_CPUS]; void *synic_event_page[NR_CPUS]; + /* + * Hypervisor's notion of virtual processor ID is different from + * Linux' notion of CPU ID. This information can only be retrieved + * in the context of the calling CPU. Setup a map for easy access + * to this information: + * + * vp_index[a] is the Hyper-V's processor ID corresponding to + * Linux cpuid 'a'. + */ + u32 vp_index[NR_CPUS]; + /* + * Starting with win8, we can take channel interrupts on any CPU; + * we will manage the tasklet that handles events on a per CPU + * basis. + */ + struct tasklet_struct *event_dpc[NR_CPUS]; }; extern struct hv_context hv_context; @@ -538,12 +525,19 @@ extern int hv_post_message(union hv_connection_id connection_id, enum hv_message_type message_type, void *payload, size_t payload_size); -extern u16 hv_signal_event(void); +extern u16 hv_signal_event(void *con_id); extern void hv_synic_init(void *irqarg); extern void hv_synic_cleanup(void *arg); +/* + * Host version information. + */ +extern unsigned int host_info_eax; +extern unsigned int host_info_ebx; +extern unsigned int host_info_ecx; +extern unsigned int host_info_edx; /* Interface */ @@ -555,7 +549,7 @@ void hv_ringbuffer_cleanup(struct hv_ring_buffer_info *ring_info); int hv_ringbuffer_write(struct hv_ring_buffer_info *ring_info, struct scatterlist *sglist, - u32 sgcount); + u32 sgcount, bool *signal); int hv_ringbuffer_peek(struct hv_ring_buffer_info *ring_info, void *buffer, u32 buflen); @@ -563,13 +557,16 @@ int hv_ringbuffer_peek(struct hv_ring_buffer_info *ring_info, void *buffer, int hv_ringbuffer_read(struct hv_ring_buffer_info *ring_info, void *buffer, u32 buflen, - u32 offset); + u32 offset, bool *signal); -u32 hv_get_ringbuffer_interrupt_mask(struct hv_ring_buffer_info *ring_info); void hv_ringbuffer_get_debuginfo(struct hv_ring_buffer_info *ring_info, struct hv_ring_buffer_debug_info *debug_info); +void hv_begin_read(struct hv_ring_buffer_info *rbi); + +u32 hv_end_read(struct hv_ring_buffer_info *rbi); + /* * Maximum channels is determined by the size of the interrupt page * which is PAGE_SIZE. 1/2 of PAGE_SIZE is for send endpoint interrupt @@ -657,7 +654,7 @@ int vmbus_connect(void); int vmbus_post_msg(void *buffer, size_t buflen); -int vmbus_set_event(u32 child_relid); +int vmbus_set_event(struct vmbus_channel *channel); void vmbus_on_event(unsigned long data); diff --git a/drivers/hv/ring_buffer.c b/drivers/hv/ring_buffer.c index 7233c88f01b8..cafa72ffdc30 100644 --- a/drivers/hv/ring_buffer.c +++ b/drivers/hv/ring_buffer.c @@ -29,6 +29,105 @@ #include "hyperv_vmbus.h" +void hv_begin_read(struct hv_ring_buffer_info *rbi) +{ + rbi->ring_buffer->interrupt_mask = 1; + smp_mb(); +} + +u32 hv_end_read(struct hv_ring_buffer_info *rbi) +{ + u32 read; + u32 write; + + rbi->ring_buffer->interrupt_mask = 0; + smp_mb(); + + /* + * Now check to see if the ring buffer is still empty. + * If it is not, we raced and we need to process new + * incoming messages. + */ + hv_get_ringbuffer_availbytes(rbi, &read, &write); + + return read; +} + +/* + * When we write to the ring buffer, check if the host needs to + * be signaled. Here is the details of this protocol: + * + * 1. The host guarantees that while it is draining the + * ring buffer, it will set the interrupt_mask to + * indicate it does not need to be interrupted when + * new data is placed. + * + * 2. The host guarantees that it will completely drain + * the ring buffer before exiting the read loop. Further, + * once the ring buffer is empty, it will clear the + * interrupt_mask and re-check to see if new data has + * arrived. + */ + +static bool hv_need_to_signal(u32 old_write, struct hv_ring_buffer_info *rbi) +{ + if (rbi->ring_buffer->interrupt_mask) + return false; + + /* + * This is the only case we need to signal when the + * ring transitions from being empty to non-empty. + */ + if (old_write == rbi->ring_buffer->read_index) + return true; + + return false; +} + +/* + * To optimize the flow management on the send-side, + * when the sender is blocked because of lack of + * sufficient space in the ring buffer, potential the + * consumer of the ring buffer can signal the producer. + * This is controlled by the following parameters: + * + * 1. pending_send_sz: This is the size in bytes that the + * producer is trying to send. + * 2. The feature bit feat_pending_send_sz set to indicate if + * the consumer of the ring will signal when the ring + * state transitions from being full to a state where + * there is room for the producer to send the pending packet. + */ + +static bool hv_need_to_signal_on_read(u32 old_rd, + struct hv_ring_buffer_info *rbi) +{ + u32 prev_write_sz; + u32 cur_write_sz; + u32 r_size; + u32 write_loc = rbi->ring_buffer->write_index; + u32 read_loc = rbi->ring_buffer->read_index; + u32 pending_sz = rbi->ring_buffer->pending_send_sz; + + /* + * If the other end is not blocked on write don't bother. + */ + if (pending_sz == 0) + return false; + + r_size = rbi->ring_datasize; + cur_write_sz = write_loc >= read_loc ? r_size - (write_loc - read_loc) : + read_loc - write_loc; + + prev_write_sz = write_loc >= old_rd ? r_size - (write_loc - old_rd) : + old_rd - write_loc; + + + if ((prev_write_sz < pending_sz) && (cur_write_sz >= pending_sz)) + return true; + + return false; +} /* * hv_get_next_write_location() @@ -239,19 +338,6 @@ void hv_ringbuffer_get_debuginfo(struct hv_ring_buffer_info *ring_info, } } - -/* - * - * hv_get_ringbuffer_interrupt_mask() - * - * Get the interrupt mask for the specified ring buffer - * - */ -u32 hv_get_ringbuffer_interrupt_mask(struct hv_ring_buffer_info *rbi) -{ - return rbi->ring_buffer->interrupt_mask; -} - /* * * hv_ringbuffer_init() @@ -298,7 +384,7 @@ void hv_ringbuffer_cleanup(struct hv_ring_buffer_info *ring_info) * */ int hv_ringbuffer_write(struct hv_ring_buffer_info *outring_info, - struct scatterlist *sglist, u32 sgcount) + struct scatterlist *sglist, u32 sgcount, bool *signal) { int i = 0; u32 bytes_avail_towrite; @@ -307,6 +393,7 @@ int hv_ringbuffer_write(struct hv_ring_buffer_info *outring_info, struct scatterlist *sg; u32 next_write_location; + u32 old_write; u64 prev_indices = 0; unsigned long flags; @@ -335,6 +422,8 @@ int hv_ringbuffer_write(struct hv_ring_buffer_info *outring_info, /* Write to the ring buffer */ next_write_location = hv_get_next_write_location(outring_info); + old_write = next_write_location; + for_each_sg(sglist, sg, sgcount, i) { next_write_location = hv_copyto_ringbuffer(outring_info, @@ -351,14 +440,16 @@ int hv_ringbuffer_write(struct hv_ring_buffer_info *outring_info, &prev_indices, sizeof(u64)); - /* Make sure we flush all writes before updating the writeIndex */ - smp_wmb(); + /* Issue a full memory barrier before updating the write index */ + smp_mb(); /* Now, update the write location */ hv_set_next_write_location(outring_info, next_write_location); spin_unlock_irqrestore(&outring_info->ring_lock, flags); + + *signal = hv_need_to_signal(old_write, outring_info); return 0; } @@ -414,13 +505,14 @@ int hv_ringbuffer_peek(struct hv_ring_buffer_info *Inring_info, * */ int hv_ringbuffer_read(struct hv_ring_buffer_info *inring_info, void *buffer, - u32 buflen, u32 offset) + u32 buflen, u32 offset, bool *signal) { u32 bytes_avail_towrite; u32 bytes_avail_toread; u32 next_read_location = 0; u64 prev_indices = 0; unsigned long flags; + u32 old_read; if (buflen <= 0) return -EINVAL; @@ -431,6 +523,8 @@ int hv_ringbuffer_read(struct hv_ring_buffer_info *inring_info, void *buffer, &bytes_avail_toread, &bytes_avail_towrite); + old_read = bytes_avail_toread; + /* Make sure there is something to read */ if (bytes_avail_toread < buflen) { spin_unlock_irqrestore(&inring_info->ring_lock, flags); @@ -461,5 +555,7 @@ int hv_ringbuffer_read(struct hv_ring_buffer_info *inring_info, void *buffer, spin_unlock_irqrestore(&inring_info->ring_lock, flags); + *signal = hv_need_to_signal_on_read(old_read, inring_info); + return 0; } diff --git a/drivers/hv/vmbus_drv.c b/drivers/hv/vmbus_drv.c index 8e1a9ec53003..cf19dfa5ead1 100644 --- a/drivers/hv/vmbus_drv.c +++ b/drivers/hv/vmbus_drv.c @@ -33,6 +33,7 @@ #include <acpi/acpi_bus.h> #include <linux/completion.h> #include <linux/hyperv.h> +#include <linux/kernel_stat.h> #include <asm/hyperv.h> #include <asm/hypervisor.h> #include "hyperv_vmbus.h" @@ -41,7 +42,6 @@ static struct acpi_device *hv_acpi_dev; static struct tasklet_struct msg_dpc; -static struct tasklet_struct event_dpc; static struct completion probe_event; static int irq; @@ -454,21 +454,40 @@ static irqreturn_t vmbus_isr(int irq, void *dev_id) union hv_synic_event_flags *event; bool handled = false; + page_addr = hv_context.synic_event_page[cpu]; + if (page_addr == NULL) + return IRQ_NONE; + + event = (union hv_synic_event_flags *)page_addr + + VMBUS_MESSAGE_SINT; /* * Check for events before checking for messages. This is the order * in which events and messages are checked in Windows guests on * Hyper-V, and the Windows team suggested we do the same. */ - page_addr = hv_context.synic_event_page[cpu]; - event = (union hv_synic_event_flags *)page_addr + VMBUS_MESSAGE_SINT; + if ((vmbus_proto_version == VERSION_WS2008) || + (vmbus_proto_version == VERSION_WIN7)) { - /* Since we are a child, we only need to check bit 0 */ - if (sync_test_and_clear_bit(0, (unsigned long *) &event->flags32[0])) { + /* Since we are a child, we only need to check bit 0 */ + if (sync_test_and_clear_bit(0, + (unsigned long *) &event->flags32[0])) { + handled = true; + } + } else { + /* + * Our host is win8 or above. The signaling mechanism + * has changed and we can directly look at the event page. + * If bit n is set then we have an interrup on the channel + * whose id is n. + */ handled = true; - tasklet_schedule(&event_dpc); } + if (handled) + tasklet_schedule(hv_context.event_dpc[cpu]); + + page_addr = hv_context.synic_message_page[cpu]; msg = (struct hv_message *)page_addr + VMBUS_MESSAGE_SINT; @@ -485,6 +504,19 @@ static irqreturn_t vmbus_isr(int irq, void *dev_id) } /* + * vmbus interrupt flow handler: + * vmbus interrupts can concurrently occur on multiple CPUs and + * can be handled concurrently. + */ + +static void vmbus_flow_handler(unsigned int irq, struct irq_desc *desc) +{ + kstat_incr_irqs_this_cpu(irq, desc); + + desc->action->handler(irq, desc->action->dev_id); +} + +/* * vmbus_bus_init -Main vmbus driver initialization routine. * * Here, we @@ -506,7 +538,6 @@ static int vmbus_bus_init(int irq) } tasklet_init(&msg_dpc, vmbus_on_msg_dpc, 0); - tasklet_init(&event_dpc, vmbus_on_event, 0); ret = bus_register(&hv_bus); if (ret) @@ -520,6 +551,13 @@ static int vmbus_bus_init(int irq) goto err_unregister; } + /* + * Vmbus interrupts can be handled concurrently on + * different CPUs. Establish an appropriate interrupt flow + * handler that can support this model. + */ + irq_set_handler(irq, vmbus_flow_handler); + vector = IRQ0_VECTOR + irq; /* @@ -575,8 +613,6 @@ int __vmbus_driver_register(struct hv_driver *hv_driver, struct module *owner, c ret = driver_register(&hv_driver->driver); - vmbus_request_offers(); - return ret; } EXPORT_SYMBOL_GPL(__vmbus_driver_register); diff --git a/drivers/ipack/devices/ipoctal.c b/drivers/ipack/devices/ipoctal.c index ab20a0851dd2..141094e7c06e 100644 --- a/drivers/ipack/devices/ipoctal.c +++ b/drivers/ipack/devices/ipoctal.c @@ -20,7 +20,6 @@ #include <linux/serial.h> #include <linux/tty_flip.h> #include <linux/slab.h> -#include <linux/atomic.h> #include <linux/io.h> #include <linux/ipack.h> #include "ipoctal.h" @@ -38,21 +37,19 @@ struct ipoctal_channel { spinlock_t lock; unsigned int pointer_read; unsigned int pointer_write; - atomic_t open; struct tty_port tty_port; union scc2698_channel __iomem *regs; union scc2698_block __iomem *block_regs; unsigned int board_id; - unsigned char *board_write; u8 isr_rx_rdy_mask; u8 isr_tx_rdy_mask; + unsigned int rx_enable; }; struct ipoctal { struct ipack_device *dev; unsigned int board_id; struct ipoctal_channel channel[NR_CHANNELS]; - unsigned char write; struct tty_driver *tty_drv; u8 __iomem *mem8_space; u8 __iomem *int_space; @@ -64,28 +61,23 @@ static int ipoctal_port_activate(struct tty_port *port, struct tty_struct *tty) channel = dev_get_drvdata(tty->dev); + /* + * Enable RX. TX will be enabled when + * there is something to send + */ iowrite8(CR_ENABLE_RX, &channel->regs->w.cr); + channel->rx_enable = 1; return 0; } static int ipoctal_open(struct tty_struct *tty, struct file *file) { - int res; struct ipoctal_channel *channel; channel = dev_get_drvdata(tty->dev); - - if (atomic_read(&channel->open)) - return -EBUSY; - tty->driver_data = channel; - res = tty_port_open(&channel->tty_port, tty, file); - if (res) - return res; - - atomic_inc(&channel->open); - return 0; + return tty_port_open(&channel->tty_port, tty, file); } static void ipoctal_reset_stats(struct ipoctal_stats *stats) @@ -111,9 +103,7 @@ static void ipoctal_close(struct tty_struct *tty, struct file *filp) struct ipoctal_channel *channel = tty->driver_data; tty_port_close(&channel->tty_port, tty, filp); - - if (atomic_dec_and_test(&channel->open)) - ipoctal_free_channel(channel); + ipoctal_free_channel(channel); } static int ipoctal_get_icount(struct tty_struct *tty, @@ -137,11 +127,12 @@ static void ipoctal_irq_rx(struct ipoctal_channel *channel, u8 sr) { struct tty_port *port = &channel->tty_port; unsigned char value; - unsigned char flag = TTY_NORMAL; + unsigned char flag; u8 isr; do { value = ioread8(&channel->regs->r.rhr); + flag = TTY_NORMAL; /* Error: count statistics */ if (sr & SR_ERROR) { iowrite8(CR_CMD_RESET_ERR_STATUS, &channel->regs->w.cr); @@ -183,10 +174,8 @@ static void ipoctal_irq_tx(struct ipoctal_channel *channel) unsigned char value; unsigned int *pointer_write = &channel->pointer_write; - if (channel->nb_bytes <= 0) { - channel->nb_bytes = 0; + if (channel->nb_bytes == 0) return; - } value = channel->tty_port.xmit_buf[*pointer_write]; iowrite8(value, &channel->regs->w.thr); @@ -194,39 +183,27 @@ static void ipoctal_irq_tx(struct ipoctal_channel *channel) (*pointer_write)++; *pointer_write = *pointer_write % PAGE_SIZE; channel->nb_bytes--; - - if ((channel->nb_bytes == 0) && - (waitqueue_active(&channel->queue))) { - - if (channel->board_id != IPACK1_DEVICE_ID_SBS_OCTAL_485) { - *channel->board_write = 1; - wake_up_interruptible(&channel->queue); - } - } } static void ipoctal_irq_channel(struct ipoctal_channel *channel) { u8 isr, sr; - /* If there is no client, skip the check */ - if (!atomic_read(&channel->open)) - return; - + spin_lock(&channel->lock); /* The HW is organized in pair of channels. See which register we need * to read from */ isr = ioread8(&channel->block_regs->r.isr); sr = ioread8(&channel->regs->r.sr); - /* In case of RS-485, change from TX to RX when finishing TX. - * Half-duplex. */ - if ((channel->board_id == IPACK1_DEVICE_ID_SBS_OCTAL_485) && - (sr & SR_TX_EMPTY) && (channel->nb_bytes == 0)) { + if ((sr & SR_TX_EMPTY) && (channel->nb_bytes == 0)) { iowrite8(CR_DISABLE_TX, &channel->regs->w.cr); - iowrite8(CR_CMD_NEGATE_RTSN, &channel->regs->w.cr); - iowrite8(CR_ENABLE_RX, &channel->regs->w.cr); - *channel->board_write = 1; - wake_up_interruptible(&channel->queue); + /* In case of RS-485, change from TX to RX when finishing TX. + * Half-duplex. */ + if (channel->board_id == IPACK1_DEVICE_ID_SBS_OCTAL_485) { + iowrite8(CR_CMD_NEGATE_RTSN, &channel->regs->w.cr); + iowrite8(CR_ENABLE_RX, &channel->regs->w.cr); + channel->rx_enable = 1; + } } /* RX data */ @@ -237,7 +214,7 @@ static void ipoctal_irq_channel(struct ipoctal_channel *channel) if ((isr & channel->isr_tx_rdy_mask) && (sr & SR_TX_READY)) ipoctal_irq_tx(channel); - tty_flip_buffer_push(&channel->tty_port); + spin_unlock(&channel->lock); } static irqreturn_t ipoctal_irq_handler(void *arg) @@ -245,14 +222,14 @@ static irqreturn_t ipoctal_irq_handler(void *arg) unsigned int i; struct ipoctal *ipoctal = (struct ipoctal *) arg; - /* Check all channels */ - for (i = 0; i < NR_CHANNELS; i++) - ipoctal_irq_channel(&ipoctal->channel[i]); - /* Clear the IPack device interrupt */ readw(ipoctal->int_space + ACK_INT_REQ0); readw(ipoctal->int_space + ACK_INT_REQ1); + /* Check all channels */ + for (i = 0; i < NR_CHANNELS; i++) + ipoctal_irq_channel(&ipoctal->channel[i]); + return IRQ_HANDLED; } @@ -306,7 +283,7 @@ static int ipoctal_inst_slot(struct ipoctal *ipoctal, unsigned int bus_nr, ipoctal->mem8_space = devm_ioremap_nocache(&ipoctal->dev->dev, region->start, 0x8000); - if (!addr) { + if (!ipoctal->mem8_space) { dev_err(&ipoctal->dev->dev, "Unable to map slot [%d:%d] MEM8 space!\n", bus_nr, slot); @@ -319,7 +296,6 @@ static int ipoctal_inst_slot(struct ipoctal *ipoctal, unsigned int bus_nr, struct ipoctal_channel *channel = &ipoctal->channel[i]; channel->regs = chan_regs + i; channel->block_regs = block_regs + (i >> 1); - channel->board_write = &ipoctal->write; channel->board_id = ipoctal->board_id; if (i & 1) { channel->isr_tx_rdy_mask = ISR_TxRDY_B; @@ -330,6 +306,7 @@ static int ipoctal_inst_slot(struct ipoctal *ipoctal, unsigned int bus_nr, } iowrite8(CR_DISABLE_RX | CR_DISABLE_TX, &channel->regs->w.cr); + channel->rx_enable = 0; iowrite8(CR_CMD_RESET_RX, &channel->regs->w.cr); iowrite8(CR_CMD_RESET_TX, &channel->regs->w.cr); iowrite8(MR1_CHRL_8_BITS | MR1_ERROR_CHAR | MR1_RxINT_RxRDY, @@ -402,8 +379,6 @@ static int ipoctal_inst_slot(struct ipoctal *ipoctal, unsigned int bus_nr, ipoctal_reset_stats(&channel->stats); channel->nb_bytes = 0; - init_waitqueue_head(&channel->queue); - spin_lock_init(&channel->lock); channel->pointer_read = 0; channel->pointer_write = 0; @@ -414,12 +389,6 @@ static int ipoctal_inst_slot(struct ipoctal *ipoctal, unsigned int bus_nr, continue; } dev_set_drvdata(tty_dev, channel); - - /* - * Enable again the RX. TX will be enabled when - * there is something to send - */ - iowrite8(CR_ENABLE_RX, &channel->regs->w.cr); } return 0; @@ -459,6 +428,7 @@ static int ipoctal_write_tty(struct tty_struct *tty, /* As the IP-OCTAL 485 only supports half duplex, do it manually */ if (channel->board_id == IPACK1_DEVICE_ID_SBS_OCTAL_485) { iowrite8(CR_DISABLE_RX, &channel->regs->w.cr); + channel->rx_enable = 0; iowrite8(CR_CMD_ASSERT_RTSN, &channel->regs->w.cr); } @@ -467,10 +437,6 @@ static int ipoctal_write_tty(struct tty_struct *tty, * operations */ iowrite8(CR_ENABLE_TX, &channel->regs->w.cr); - wait_event_interruptible(channel->queue, *channel->board_write); - iowrite8(CR_DISABLE_TX, &channel->regs->w.cr); - - *channel->board_write = 0; return char_copied; } @@ -622,8 +588,9 @@ static void ipoctal_set_termios(struct tty_struct *tty, iowrite8(mr2, &channel->regs->w.mr); iowrite8(csr, &channel->regs->w.csr); - /* Enable again the RX */ - iowrite8(CR_ENABLE_RX, &channel->regs->w.cr); + /* Enable again the RX, if it was before */ + if (channel->rx_enable) + iowrite8(CR_ENABLE_RX, &channel->regs->w.cr); } static void ipoctal_hangup(struct tty_struct *tty) @@ -643,6 +610,7 @@ static void ipoctal_hangup(struct tty_struct *tty) tty_port_hangup(&channel->tty_port); iowrite8(CR_DISABLE_RX | CR_DISABLE_TX, &channel->regs->w.cr); + channel->rx_enable = 0; iowrite8(CR_CMD_RESET_RX, &channel->regs->w.cr); iowrite8(CR_CMD_RESET_TX, &channel->regs->w.cr); iowrite8(CR_CMD_RESET_ERR_STATUS, &channel->regs->w.cr); @@ -652,6 +620,22 @@ static void ipoctal_hangup(struct tty_struct *tty) wake_up_interruptible(&channel->tty_port.open_wait); } +static void ipoctal_shutdown(struct tty_struct *tty) +{ + struct ipoctal_channel *channel = tty->driver_data; + + if (channel == NULL) + return; + + iowrite8(CR_DISABLE_RX | CR_DISABLE_TX, &channel->regs->w.cr); + channel->rx_enable = 0; + iowrite8(CR_CMD_RESET_RX, &channel->regs->w.cr); + iowrite8(CR_CMD_RESET_TX, &channel->regs->w.cr); + iowrite8(CR_CMD_RESET_ERR_STATUS, &channel->regs->w.cr); + iowrite8(CR_CMD_RESET_MR, &channel->regs->w.cr); + clear_bit(ASYNCB_INITIALIZED, &channel->tty_port.flags); +} + static const struct tty_operations ipoctal_fops = { .ioctl = NULL, .open = ipoctal_open, @@ -662,6 +646,7 @@ static const struct tty_operations ipoctal_fops = { .chars_in_buffer = ipoctal_chars_in_buffer, .get_icount = ipoctal_get_icount, .hangup = ipoctal_hangup, + .shutdown = ipoctal_shutdown, }; static int ipoctal_probe(struct ipack_device *dev) diff --git a/drivers/mfd/wm5102-tables.c b/drivers/mfd/wm5102-tables.c index f6fcb87b3504..a9d9d41d95d3 100644 --- a/drivers/mfd/wm5102-tables.c +++ b/drivers/mfd/wm5102-tables.c @@ -84,6 +84,12 @@ int wm5102_patch(struct arizona *arizona) } static const struct regmap_irq wm5102_aod_irqs[ARIZONA_NUM_IRQ] = { + [ARIZONA_IRQ_MICD_CLAMP_FALL] = { + .mask = ARIZONA_MICD_CLAMP_FALL_EINT1 + }, + [ARIZONA_IRQ_MICD_CLAMP_RISE] = { + .mask = ARIZONA_MICD_CLAMP_RISE_EINT1 + }, [ARIZONA_IRQ_GP5_FALL] = { .mask = ARIZONA_GP5_FALL_EINT1 }, [ARIZONA_IRQ_GP5_RISE] = { .mask = ARIZONA_GP5_RISE_EINT1 }, [ARIZONA_IRQ_JD_FALL] = { .mask = ARIZONA_JD1_FALL_EINT1 }, @@ -313,6 +319,7 @@ static const struct reg_default wm5102_reg_default[] = { { 0x0000021A, 0x01A6 }, /* R538 - Mic Bias Ctrl 3 */ { 0x00000293, 0x0000 }, /* R659 - Accessory Detect Mode 1 */ { 0x0000029B, 0x0020 }, /* R667 - Headphone Detect 1 */ + { 0x000002A2, 0x0000 }, /* R674 - Micd clamp control */ { 0x000002A3, 0x1102 }, /* R675 - Mic Detect 1 */ { 0x000002A4, 0x009F }, /* R676 - Mic Detect 2 */ { 0x000002A5, 0x0000 }, /* R677 - Mic Detect 3 */ @@ -1107,6 +1114,8 @@ static bool wm5102_readable_register(struct device *dev, unsigned int reg) case ARIZONA_ACCESSORY_DETECT_MODE_1: case ARIZONA_HEADPHONE_DETECT_1: case ARIZONA_HEADPHONE_DETECT_2: + case ARIZONA_HP_DACVAL: + case ARIZONA_MICD_CLAMP_CONTROL: case ARIZONA_MIC_DETECT_1: case ARIZONA_MIC_DETECT_2: case ARIZONA_MIC_DETECT_3: @@ -1876,6 +1885,7 @@ static bool wm5102_volatile_register(struct device *dev, unsigned int reg) case ARIZONA_DSP1_STATUS_2: case ARIZONA_DSP1_STATUS_3: case ARIZONA_HEADPHONE_DETECT_2: + case ARIZONA_HP_DACVAL: case ARIZONA_MIC_DETECT_3: return true; default: diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 668a5822ab4e..e83fdfe0c8ca 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -499,6 +499,17 @@ config USB_SWITCH_FSA9480 stereo and mono audio, video, microphone and UART data to use a common connector port. +config LATTICE_ECP3_CONFIG + tristate "Lattice ECP3 FPGA bitstream configuration via SPI" + depends on SPI && SYSFS + select FW_LOADER + default n + help + This option enables support for bitstream configuration (programming + or loading) of the Lattice ECP3 FPGA family via SPI. + + If unsure, say N. + source "drivers/misc/c2port/Kconfig" source "drivers/misc/eeprom/Kconfig" source "drivers/misc/cb710/Kconfig" @@ -507,4 +518,5 @@ source "drivers/misc/lis3lv02d/Kconfig" source "drivers/misc/carma/Kconfig" source "drivers/misc/altera-stapl/Kconfig" source "drivers/misc/mei/Kconfig" +source "drivers/misc/vmw_vmci/Kconfig" endmenu diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index 2129377c0de6..35a1463c72d9 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -49,3 +49,6 @@ obj-y += carma/ obj-$(CONFIG_USB_SWITCH_FSA9480) += fsa9480.o obj-$(CONFIG_ALTERA_STAPL) +=altera-stapl/ obj-$(CONFIG_INTEL_MEI) += mei/ +obj-$(CONFIG_MAX8997_MUIC) += max8997-muic.o +obj-$(CONFIG_VMWARE_VMCI) += vmw_vmci/ +obj-$(CONFIG_LATTICE_ECP3_CONFIG) += lattice-ecp3-config.o diff --git a/drivers/misc/cb710/Kconfig b/drivers/misc/cb710/Kconfig index 22429b8b1068..5acb9c5b49c4 100644 --- a/drivers/misc/cb710/Kconfig +++ b/drivers/misc/cb710/Kconfig @@ -1,6 +1,6 @@ config CB710_CORE tristate "ENE CB710/720 Flash memory card reader support" - depends on PCI + depends on PCI && GENERIC_HARDIRQS help This option enables support for PCI ENE CB710/720 Flash memory card reader found in some laptops (ie. some versions of HP Compaq nx9500). diff --git a/drivers/misc/lattice-ecp3-config.c b/drivers/misc/lattice-ecp3-config.c new file mode 100644 index 000000000000..155700bfd2b6 --- /dev/null +++ b/drivers/misc/lattice-ecp3-config.c @@ -0,0 +1,243 @@ +/* + * Copyright (C) 2012 Stefan Roese <sr@denx.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/device.h> +#include <linux/firmware.h> +#include <linux/module.h> +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/spi/spi.h> +#include <linux/platform_device.h> +#include <linux/delay.h> + +#define FIRMWARE_NAME "lattice-ecp3.bit" + +/* + * The JTAG ID's of the supported FPGA's. The ID is 32bit wide + * reversed as noted in the manual. + */ +#define ID_ECP3_17 0xc2088080 +#define ID_ECP3_35 0xc2048080 + +/* FPGA commands */ +#define FPGA_CMD_READ_ID 0x07 /* plus 24 bits */ +#define FPGA_CMD_READ_STATUS 0x09 /* plus 24 bits */ +#define FPGA_CMD_CLEAR 0x70 +#define FPGA_CMD_REFRESH 0x71 +#define FPGA_CMD_WRITE_EN 0x4a /* plus 2 bits */ +#define FPGA_CMD_WRITE_DIS 0x4f /* plus 8 bits */ +#define FPGA_CMD_WRITE_INC 0x41 /* plus 0 bits */ + +/* + * The status register is 32bit revered, DONE is bit 17 from the TN1222.pdf + * (LatticeECP3 Slave SPI Port User's Guide) + */ +#define FPGA_STATUS_DONE 0x00004000 +#define FPGA_STATUS_CLEARED 0x00010000 + +#define FPGA_CLEAR_TIMEOUT 5000 /* max. 5000ms for FPGA clear */ +#define FPGA_CLEAR_MSLEEP 10 +#define FPGA_CLEAR_LOOP_COUNT (FPGA_CLEAR_TIMEOUT / FPGA_CLEAR_MSLEEP) + +struct fpga_data { + struct completion fw_loaded; +}; + +struct ecp3_dev { + u32 jedec_id; + char *name; +}; + +static const struct ecp3_dev ecp3_dev[] = { + { + .jedec_id = ID_ECP3_17, + .name = "Lattice ECP3-17", + }, + { + .jedec_id = ID_ECP3_35, + .name = "Lattice ECP3-35", + }, +}; + +static void firmware_load(const struct firmware *fw, void *context) +{ + struct spi_device *spi = (struct spi_device *)context; + struct fpga_data *data = dev_get_drvdata(&spi->dev); + u8 *buffer; + int ret; + u8 txbuf[8]; + u8 rxbuf[8]; + int rx_len = 8; + int i; + u32 jedec_id; + u32 status; + + if (fw->size == 0) { + dev_err(&spi->dev, "Error: Firmware size is 0!\n"); + return; + } + + /* Fill dummy data (24 stuffing bits for commands) */ + txbuf[1] = 0x00; + txbuf[2] = 0x00; + txbuf[3] = 0x00; + + /* Trying to speak with the FPGA via SPI... */ + txbuf[0] = FPGA_CMD_READ_ID; + ret = spi_write_then_read(spi, txbuf, 8, rxbuf, rx_len); + dev_dbg(&spi->dev, "FPGA JTAG ID=%08x\n", *(u32 *)&rxbuf[4]); + jedec_id = *(u32 *)&rxbuf[4]; + + for (i = 0; i < ARRAY_SIZE(ecp3_dev); i++) { + if (jedec_id == ecp3_dev[i].jedec_id) + break; + } + if (i == ARRAY_SIZE(ecp3_dev)) { + dev_err(&spi->dev, + "Error: No supported FPGA detected (JEDEC_ID=%08x)!\n", + jedec_id); + return; + } + + dev_info(&spi->dev, "FPGA %s detected\n", ecp3_dev[i].name); + + txbuf[0] = FPGA_CMD_READ_STATUS; + ret = spi_write_then_read(spi, txbuf, 8, rxbuf, rx_len); + dev_dbg(&spi->dev, "FPGA Status=%08x\n", *(u32 *)&rxbuf[4]); + + buffer = kzalloc(fw->size + 8, GFP_KERNEL); + if (!buffer) { + dev_err(&spi->dev, "Error: Can't allocate memory!\n"); + return; + } + + /* + * Insert WRITE_INC command into stream (one SPI frame) + */ + buffer[0] = FPGA_CMD_WRITE_INC; + buffer[1] = 0xff; + buffer[2] = 0xff; + buffer[3] = 0xff; + memcpy(buffer + 4, fw->data, fw->size); + + txbuf[0] = FPGA_CMD_REFRESH; + ret = spi_write(spi, txbuf, 4); + + txbuf[0] = FPGA_CMD_WRITE_EN; + ret = spi_write(spi, txbuf, 4); + + txbuf[0] = FPGA_CMD_CLEAR; + ret = spi_write(spi, txbuf, 4); + + /* + * Wait for FPGA memory to become cleared + */ + for (i = 0; i < FPGA_CLEAR_LOOP_COUNT; i++) { + txbuf[0] = FPGA_CMD_READ_STATUS; + ret = spi_write_then_read(spi, txbuf, 8, rxbuf, rx_len); + status = *(u32 *)&rxbuf[4]; + if (status == FPGA_STATUS_CLEARED) + break; + + msleep(FPGA_CLEAR_MSLEEP); + } + + if (i == FPGA_CLEAR_LOOP_COUNT) { + dev_err(&spi->dev, + "Error: Timeout waiting for FPGA to clear (status=%08x)!\n", + status); + kfree(buffer); + return; + } + + dev_info(&spi->dev, "Configuring the FPGA...\n"); + ret = spi_write(spi, buffer, fw->size + 8); + + txbuf[0] = FPGA_CMD_WRITE_DIS; + ret = spi_write(spi, txbuf, 4); + + txbuf[0] = FPGA_CMD_READ_STATUS; + ret = spi_write_then_read(spi, txbuf, 8, rxbuf, rx_len); + dev_dbg(&spi->dev, "FPGA Status=%08x\n", *(u32 *)&rxbuf[4]); + status = *(u32 *)&rxbuf[4]; + + /* Check result */ + if (status & FPGA_STATUS_DONE) + dev_info(&spi->dev, "FPGA succesfully configured!\n"); + else + dev_info(&spi->dev, "FPGA not configured (DONE not set)\n"); + + /* + * Don't forget to release the firmware again + */ + release_firmware(fw); + + kfree(buffer); + + complete(&data->fw_loaded); +} + +static int lattice_ecp3_probe(struct spi_device *spi) +{ + struct fpga_data *data; + int err; + + data = devm_kzalloc(&spi->dev, sizeof(*data), GFP_KERNEL); + if (!data) { + dev_err(&spi->dev, "Memory allocation for fpga_data failed\n"); + return -ENOMEM; + } + spi_set_drvdata(spi, data); + + init_completion(&data->fw_loaded); + err = request_firmware_nowait(THIS_MODULE, FW_ACTION_NOHOTPLUG, + FIRMWARE_NAME, &spi->dev, + GFP_KERNEL, spi, firmware_load); + if (err) { + dev_err(&spi->dev, "Firmware loading failed with %d!\n", err); + return err; + } + + dev_info(&spi->dev, "FPGA bitstream configuration driver registered\n"); + + return 0; +} + +static int lattice_ecp3_remove(struct spi_device *spi) +{ + struct fpga_data *data = spi_get_drvdata(spi); + + wait_for_completion(&data->fw_loaded); + + return 0; +} + +static const struct spi_device_id lattice_ecp3_id[] = { + { "ecp3-17", 0 }, + { "ecp3-35", 0 }, + { } +}; +MODULE_DEVICE_TABLE(spi, lattice_ecp3_id); + +static struct spi_driver lattice_ecp3_driver = { + .driver = { + .name = "lattice-ecp3", + .owner = THIS_MODULE, + }, + .probe = lattice_ecp3_probe, + .remove = lattice_ecp3_remove, + .id_table = lattice_ecp3_id, +}; + +module_spi_driver(lattice_ecp3_driver); + +MODULE_AUTHOR("Stefan Roese <sr@denx.de>"); +MODULE_DESCRIPTION("Lattice ECP3 FPGA configuration via SPI"); +MODULE_LICENSE("GPL"); diff --git a/drivers/misc/mei/Kconfig b/drivers/misc/mei/Kconfig index 5a79ccde2fdf..d21b4d006a55 100644 --- a/drivers/misc/mei/Kconfig +++ b/drivers/misc/mei/Kconfig @@ -1,11 +1,22 @@ config INTEL_MEI - tristate "Intel Management Engine Interface (Intel MEI)" + tristate "Intel Management Engine Interface" depends on X86 && PCI && WATCHDOG_CORE help The Intel Management Engine (Intel ME) provides Manageability, Security and Media services for system containing Intel chipsets. if selected /dev/mei misc device will be created. + For more information see + <http://software.intel.com/en-us/manageability/> + +config INTEL_MEI_ME + bool "ME Enabled Intel Chipsets" + depends on INTEL_MEI + depends on X86 && PCI && WATCHDOG_CORE + default y + help + MEI support for ME Enabled Intel chipsets. + Supported Chipsets are: 7 Series Chipset Family 6 Series Chipset Family @@ -24,5 +35,3 @@ config INTEL_MEI 82Q33 Express 82X38/X48 Express - For more information see - <http://software.intel.com/en-us/manageability/> diff --git a/drivers/misc/mei/Makefile b/drivers/misc/mei/Makefile index 0017842e166c..040af6c7b147 100644 --- a/drivers/misc/mei/Makefile +++ b/drivers/misc/mei/Makefile @@ -4,9 +4,11 @@ # obj-$(CONFIG_INTEL_MEI) += mei.o mei-objs := init.o +mei-objs += hbm.o mei-objs += interrupt.o -mei-objs += interface.o -mei-objs += iorw.o +mei-objs += client.o mei-objs += main.o mei-objs += amthif.o mei-objs += wd.o +mei-$(CONFIG_INTEL_MEI_ME) += pci-me.o +mei-$(CONFIG_INTEL_MEI_ME) += hw-me.o diff --git a/drivers/misc/mei/amthif.c b/drivers/misc/mei/amthif.c index e40ffd9502d1..c86d7e3839a4 100644 --- a/drivers/misc/mei/amthif.c +++ b/drivers/misc/mei/amthif.c @@ -31,15 +31,16 @@ #include <linux/jiffies.h> #include <linux/uaccess.h> +#include <linux/mei.h> #include "mei_dev.h" -#include "hw.h" -#include <linux/mei.h> -#include "interface.h" +#include "hbm.h" +#include "hw-me.h" +#include "client.h" -const uuid_le mei_amthi_guid = UUID_LE(0x12f80028, 0xb4b7, 0x4b2d, 0xac, - 0xa8, 0x46, 0xe0, 0xff, 0x65, - 0x81, 0x4c); +const uuid_le mei_amthif_guid = UUID_LE(0x12f80028, 0xb4b7, 0x4b2d, + 0xac, 0xa8, 0x46, 0xe0, + 0xff, 0x65, 0x81, 0x4c); /** * mei_amthif_reset_params - initializes mei device iamthif @@ -64,22 +65,24 @@ void mei_amthif_reset_params(struct mei_device *dev) * @dev: the device structure * */ -void mei_amthif_host_init(struct mei_device *dev) +int mei_amthif_host_init(struct mei_device *dev) { - int i; + struct mei_cl *cl = &dev->iamthif_cl; unsigned char *msg_buf; + int ret, i; + + dev->iamthif_state = MEI_IAMTHIF_IDLE; - mei_cl_init(&dev->iamthif_cl, dev); - dev->iamthif_cl.state = MEI_FILE_DISCONNECTED; + mei_cl_init(cl, dev); - /* find ME amthi client */ - i = mei_me_cl_link(dev, &dev->iamthif_cl, - &mei_amthi_guid, MEI_IAMTHIF_HOST_CLIENT_ID); + i = mei_me_cl_by_uuid(dev, &mei_amthif_guid); if (i < 0) { - dev_info(&dev->pdev->dev, "failed to find iamthif client.\n"); - return; + dev_info(&dev->pdev->dev, "amthif: failed to find the client\n"); + return -ENOENT; } + cl->me_client_id = dev->me_clients[i].client_id; + /* Assign iamthif_mtu to the value received from ME */ dev->iamthif_mtu = dev->me_clients[i].props.max_msg_length; @@ -93,19 +96,29 @@ void mei_amthif_host_init(struct mei_device *dev) msg_buf = kcalloc(dev->iamthif_mtu, sizeof(unsigned char), GFP_KERNEL); if (!msg_buf) { - dev_dbg(&dev->pdev->dev, "memory allocation for ME message buffer failed.\n"); - return; + dev_err(&dev->pdev->dev, "amthif: memory allocation for ME message buffer failed.\n"); + return -ENOMEM; } dev->iamthif_msg_buf = msg_buf; - if (mei_connect(dev, &dev->iamthif_cl)) { - dev_dbg(&dev->pdev->dev, "Failed to connect to AMTHI client\n"); - dev->iamthif_cl.state = MEI_FILE_DISCONNECTED; - dev->iamthif_cl.host_client_id = 0; + ret = mei_cl_link(cl, MEI_IAMTHIF_HOST_CLIENT_ID); + + if (ret < 0) { + dev_err(&dev->pdev->dev, "amthif: failed link client\n"); + return -ENOENT; + } + + cl->state = MEI_FILE_CONNECTING; + + if (mei_hbm_cl_connect_req(dev, cl)) { + dev_dbg(&dev->pdev->dev, "amthif: Failed to connect to ME client\n"); + cl->state = MEI_FILE_DISCONNECTED; + cl->host_client_id = 0; } else { - dev->iamthif_cl.timer_count = MEI_CONNECT_TIMEOUT; + cl->timer_count = MEI_CONNECT_TIMEOUT; } + return 0; } /** @@ -168,10 +181,10 @@ int mei_amthif_read(struct mei_device *dev, struct file *file, i = mei_me_cl_by_id(dev, dev->iamthif_cl.me_client_id); if (i < 0) { - dev_dbg(&dev->pdev->dev, "amthi client not found.\n"); + dev_dbg(&dev->pdev->dev, "amthif client not found.\n"); return -ENODEV; } - dev_dbg(&dev->pdev->dev, "checking amthi data\n"); + dev_dbg(&dev->pdev->dev, "checking amthif data\n"); cb = mei_amthif_find_read_list_entry(dev, file); /* Check for if we can block or not*/ @@ -179,7 +192,7 @@ int mei_amthif_read(struct mei_device *dev, struct file *file, return -EAGAIN; - dev_dbg(&dev->pdev->dev, "waiting for amthi data\n"); + dev_dbg(&dev->pdev->dev, "waiting for amthif data\n"); while (cb == NULL) { /* unlock the Mutex */ mutex_unlock(&dev->device_lock); @@ -197,17 +210,17 @@ int mei_amthif_read(struct mei_device *dev, struct file *file, } - dev_dbg(&dev->pdev->dev, "Got amthi data\n"); + dev_dbg(&dev->pdev->dev, "Got amthif data\n"); dev->iamthif_timer = 0; if (cb) { timeout = cb->read_time + mei_secs_to_jiffies(MEI_IAMTHIF_READ_TIMER); - dev_dbg(&dev->pdev->dev, "amthi timeout = %lud\n", + dev_dbg(&dev->pdev->dev, "amthif timeout = %lud\n", timeout); if (time_after(jiffies, timeout)) { - dev_dbg(&dev->pdev->dev, "amthi Time out\n"); + dev_dbg(&dev->pdev->dev, "amthif Time out\n"); /* 15 sec for the message has expired */ list_del(&cb->list); rets = -ETIMEDOUT; @@ -227,9 +240,9 @@ int mei_amthif_read(struct mei_device *dev, struct file *file, * remove message from deletion list */ - dev_dbg(&dev->pdev->dev, "amthi cb->response_buffer size - %d\n", + dev_dbg(&dev->pdev->dev, "amthif cb->response_buffer size - %d\n", cb->response_buffer.size); - dev_dbg(&dev->pdev->dev, "amthi cb->buf_idx - %lu\n", cb->buf_idx); + dev_dbg(&dev->pdev->dev, "amthif cb->buf_idx - %lu\n", cb->buf_idx); /* length is being turncated to PAGE_SIZE, however, * the buf_idx may point beyond */ @@ -245,7 +258,7 @@ int mei_amthif_read(struct mei_device *dev, struct file *file, } } free: - dev_dbg(&dev->pdev->dev, "free amthi cb memory.\n"); + dev_dbg(&dev->pdev->dev, "free amthif cb memory.\n"); *offset = 0; mei_io_cb_free(cb); out: @@ -269,7 +282,7 @@ static int mei_amthif_send_cmd(struct mei_device *dev, struct mei_cl_cb *cb) if (!dev || !cb) return -ENODEV; - dev_dbg(&dev->pdev->dev, "write data to amthi client.\n"); + dev_dbg(&dev->pdev->dev, "write data to amthif client.\n"); dev->iamthif_state = MEI_IAMTHIF_WRITING; dev->iamthif_current_cb = cb; @@ -280,15 +293,15 @@ static int mei_amthif_send_cmd(struct mei_device *dev, struct mei_cl_cb *cb) memcpy(dev->iamthif_msg_buf, cb->request_buffer.data, cb->request_buffer.size); - ret = mei_flow_ctrl_creds(dev, &dev->iamthif_cl); + ret = mei_cl_flow_ctrl_creds(&dev->iamthif_cl); if (ret < 0) return ret; - if (ret && dev->mei_host_buffer_is_empty) { + if (ret && dev->hbuf_is_ready) { ret = 0; - dev->mei_host_buffer_is_empty = false; - if (cb->request_buffer.size > mei_hbuf_max_data(dev)) { - mei_hdr.length = mei_hbuf_max_data(dev); + dev->hbuf_is_ready = false; + if (cb->request_buffer.size > mei_hbuf_max_len(dev)) { + mei_hdr.length = mei_hbuf_max_len(dev); mei_hdr.msg_complete = 0; } else { mei_hdr.length = cb->request_buffer.size; @@ -300,25 +313,24 @@ static int mei_amthif_send_cmd(struct mei_device *dev, struct mei_cl_cb *cb) mei_hdr.reserved = 0; dev->iamthif_msg_buf_index += mei_hdr.length; if (mei_write_message(dev, &mei_hdr, - (unsigned char *)(dev->iamthif_msg_buf), - mei_hdr.length)) + (unsigned char *)dev->iamthif_msg_buf)) return -ENODEV; if (mei_hdr.msg_complete) { - if (mei_flow_ctrl_reduce(dev, &dev->iamthif_cl)) + if (mei_cl_flow_ctrl_reduce(&dev->iamthif_cl)) return -ENODEV; dev->iamthif_flow_control_pending = true; dev->iamthif_state = MEI_IAMTHIF_FLOW_CONTROL; - dev_dbg(&dev->pdev->dev, "add amthi cb to write waiting list\n"); + dev_dbg(&dev->pdev->dev, "add amthif cb to write waiting list\n"); dev->iamthif_current_cb = cb; dev->iamthif_file_object = cb->file_object; list_add_tail(&cb->list, &dev->write_waiting_list.list); } else { - dev_dbg(&dev->pdev->dev, "message does not complete, so add amthi cb to write list.\n"); + dev_dbg(&dev->pdev->dev, "message does not complete, so add amthif cb to write list.\n"); list_add_tail(&cb->list, &dev->write_list.list); } } else { - if (!(dev->mei_host_buffer_is_empty)) + if (!dev->hbuf_is_ready) dev_dbg(&dev->pdev->dev, "host buffer is not empty"); dev_dbg(&dev->pdev->dev, "No flow control credentials, so add iamthif cb to write list.\n"); @@ -383,7 +395,7 @@ void mei_amthif_run_next_cmd(struct mei_device *dev) dev->iamthif_timer = 0; dev->iamthif_file_object = NULL; - dev_dbg(&dev->pdev->dev, "complete amthi cmd_list cb.\n"); + dev_dbg(&dev->pdev->dev, "complete amthif cmd_list cb.\n"); list_for_each_entry_safe(pos, next, &dev->amthif_cmd_list.list, list) { list_del(&pos->list); @@ -392,7 +404,7 @@ void mei_amthif_run_next_cmd(struct mei_device *dev) status = mei_amthif_send_cmd(dev, pos); if (status) { dev_dbg(&dev->pdev->dev, - "amthi write failed status = %d\n", + "amthif write failed status = %d\n", status); return; } @@ -412,7 +424,7 @@ unsigned int mei_amthif_poll(struct mei_device *dev, if (dev->iamthif_state == MEI_IAMTHIF_READ_COMPLETE && dev->iamthif_file_object == file) { mask |= (POLLIN | POLLRDNORM); - dev_dbg(&dev->pdev->dev, "run next amthi cb\n"); + dev_dbg(&dev->pdev->dev, "run next amthif cb\n"); mei_amthif_run_next_cmd(dev); } return mask; @@ -434,54 +446,51 @@ unsigned int mei_amthif_poll(struct mei_device *dev, int mei_amthif_irq_write_complete(struct mei_device *dev, s32 *slots, struct mei_cl_cb *cb, struct mei_cl_cb *cmpl_list) { - struct mei_msg_hdr *mei_hdr; + struct mei_msg_hdr mei_hdr; struct mei_cl *cl = cb->cl; size_t len = dev->iamthif_msg_buf_size - dev->iamthif_msg_buf_index; size_t msg_slots = mei_data2slots(len); - mei_hdr = (struct mei_msg_hdr *)&dev->wr_msg_buf[0]; - mei_hdr->host_addr = cl->host_client_id; - mei_hdr->me_addr = cl->me_client_id; - mei_hdr->reserved = 0; + mei_hdr.host_addr = cl->host_client_id; + mei_hdr.me_addr = cl->me_client_id; + mei_hdr.reserved = 0; if (*slots >= msg_slots) { - mei_hdr->length = len; - mei_hdr->msg_complete = 1; + mei_hdr.length = len; + mei_hdr.msg_complete = 1; /* Split the message only if we can write the whole host buffer */ } else if (*slots == dev->hbuf_depth) { msg_slots = *slots; len = (*slots * sizeof(u32)) - sizeof(struct mei_msg_hdr); - mei_hdr->length = len; - mei_hdr->msg_complete = 0; + mei_hdr.length = len; + mei_hdr.msg_complete = 0; } else { /* wait for next time the host buffer is empty */ return 0; } - dev_dbg(&dev->pdev->dev, "msg: len = %d complete = %d\n", - mei_hdr->length, mei_hdr->msg_complete); + dev_dbg(&dev->pdev->dev, MEI_HDR_FMT, MEI_HDR_PRM(&mei_hdr)); *slots -= msg_slots; - if (mei_write_message(dev, mei_hdr, - dev->iamthif_msg_buf + dev->iamthif_msg_buf_index, - mei_hdr->length)) { + if (mei_write_message(dev, &mei_hdr, + dev->iamthif_msg_buf + dev->iamthif_msg_buf_index)) { dev->iamthif_state = MEI_IAMTHIF_IDLE; cl->status = -ENODEV; list_del(&cb->list); return -ENODEV; } - if (mei_flow_ctrl_reduce(dev, cl)) + if (mei_cl_flow_ctrl_reduce(cl)) return -ENODEV; - dev->iamthif_msg_buf_index += mei_hdr->length; + dev->iamthif_msg_buf_index += mei_hdr.length; cl->status = 0; - if (mei_hdr->msg_complete) { + if (mei_hdr.msg_complete) { dev->iamthif_state = MEI_IAMTHIF_FLOW_CONTROL; dev->iamthif_flow_control_pending = true; - /* save iamthif cb sent to amthi client */ + /* save iamthif cb sent to amthif client */ cb->buf_idx = dev->iamthif_msg_buf_index; dev->iamthif_current_cb = cb; @@ -494,11 +503,11 @@ int mei_amthif_irq_write_complete(struct mei_device *dev, s32 *slots, /** * mei_amthif_irq_read_message - read routine after ISR to - * handle the read amthi message + * handle the read amthif message * * @complete_list: An instance of our list structure * @dev: the device structure - * @mei_hdr: header of amthi message + * @mei_hdr: header of amthif message * * returns 0 on success, <0 on failure. */ @@ -522,10 +531,10 @@ int mei_amthif_irq_read_message(struct mei_cl_cb *complete_list, return 0; dev_dbg(&dev->pdev->dev, - "amthi_message_buffer_index =%d\n", + "amthif_message_buffer_index =%d\n", mei_hdr->length); - dev_dbg(&dev->pdev->dev, "completed amthi read.\n "); + dev_dbg(&dev->pdev->dev, "completed amthif read.\n "); if (!dev->iamthif_current_cb) return -ENODEV; @@ -540,8 +549,8 @@ int mei_amthif_irq_read_message(struct mei_cl_cb *complete_list, cb->read_time = jiffies; if (dev->iamthif_ioctl && cb->cl == &dev->iamthif_cl) { /* found the iamthif cb */ - dev_dbg(&dev->pdev->dev, "complete the amthi read cb.\n "); - dev_dbg(&dev->pdev->dev, "add the amthi read cb to complete.\n "); + dev_dbg(&dev->pdev->dev, "complete the amthif read cb.\n "); + dev_dbg(&dev->pdev->dev, "add the amthif read cb to complete.\n "); list_add_tail(&cb->list, &complete_list->list); } return 0; @@ -563,7 +572,7 @@ int mei_amthif_irq_read(struct mei_device *dev, s32 *slots) return -EMSGSIZE; } *slots -= mei_data2slots(sizeof(struct hbm_flow_control)); - if (mei_send_flow_control(dev, &dev->iamthif_cl)) { + if (mei_hbm_cl_flow_control_req(dev, &dev->iamthif_cl)) { dev_dbg(&dev->pdev->dev, "iamthif flow control failed\n"); return -EIO; } @@ -574,7 +583,7 @@ int mei_amthif_irq_read(struct mei_device *dev, s32 *slots) dev->iamthif_msg_buf_index = 0; dev->iamthif_msg_buf_size = 0; dev->iamthif_stall_timer = MEI_IAMTHIF_STALL_TIMER; - dev->mei_host_buffer_is_empty = mei_hbuf_is_empty(dev); + dev->hbuf_is_ready = mei_hbuf_is_ready(dev); return 0; } @@ -593,7 +602,7 @@ void mei_amthif_complete(struct mei_device *dev, struct mei_cl_cb *cb) dev->iamthif_msg_buf, dev->iamthif_msg_buf_index); list_add_tail(&cb->list, &dev->amthif_rd_complete_list.list); - dev_dbg(&dev->pdev->dev, "amthi read completed\n"); + dev_dbg(&dev->pdev->dev, "amthif read completed\n"); dev->iamthif_timer = jiffies; dev_dbg(&dev->pdev->dev, "dev->iamthif_timer = %ld\n", dev->iamthif_timer); @@ -601,7 +610,7 @@ void mei_amthif_complete(struct mei_device *dev, struct mei_cl_cb *cb) mei_amthif_run_next_cmd(dev); } - dev_dbg(&dev->pdev->dev, "completing amthi call back.\n"); + dev_dbg(&dev->pdev->dev, "completing amthif call back.\n"); wake_up_interruptible(&dev->iamthif_cl.wait); } @@ -635,7 +644,8 @@ static bool mei_clear_list(struct mei_device *dev, if (dev->iamthif_current_cb == cb_pos) { dev->iamthif_current_cb = NULL; /* send flow control to iamthif client */ - mei_send_flow_control(dev, &dev->iamthif_cl); + mei_hbm_cl_flow_control_req(dev, + &dev->iamthif_cl); } /* free all allocated buffers */ mei_io_cb_free(cb_pos); @@ -706,11 +716,11 @@ int mei_amthif_release(struct mei_device *dev, struct file *file) if (dev->iamthif_file_object == file && dev->iamthif_state != MEI_IAMTHIF_IDLE) { - dev_dbg(&dev->pdev->dev, "amthi canceled iamthif state %d\n", + dev_dbg(&dev->pdev->dev, "amthif canceled iamthif state %d\n", dev->iamthif_state); dev->iamthif_canceled = true; if (dev->iamthif_state == MEI_IAMTHIF_READ_COMPLETE) { - dev_dbg(&dev->pdev->dev, "run next amthi iamthif cb\n"); + dev_dbg(&dev->pdev->dev, "run next amthif iamthif cb\n"); mei_amthif_run_next_cmd(dev); } } diff --git a/drivers/misc/mei/client.c b/drivers/misc/mei/client.c new file mode 100644 index 000000000000..1569afe935de --- /dev/null +++ b/drivers/misc/mei/client.c @@ -0,0 +1,729 @@ +/* + * + * Intel Management Engine Interface (Intel MEI) Linux driver + * Copyright (c) 2003-2012, Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + */ + +#include <linux/pci.h> +#include <linux/sched.h> +#include <linux/wait.h> +#include <linux/delay.h> + +#include <linux/mei.h> + +#include "mei_dev.h" +#include "hbm.h" +#include "client.h" + +/** + * mei_me_cl_by_uuid - locate index of me client + * + * @dev: mei device + * returns me client index or -ENOENT if not found + */ +int mei_me_cl_by_uuid(const struct mei_device *dev, const uuid_le *uuid) +{ + int i, res = -ENOENT; + + for (i = 0; i < dev->me_clients_num; ++i) + if (uuid_le_cmp(*uuid, + dev->me_clients[i].props.protocol_name) == 0) { + res = i; + break; + } + + return res; +} + + +/** + * mei_me_cl_by_id return index to me_clients for client_id + * + * @dev: the device structure + * @client_id: me client id + * + * Locking: called under "dev->device_lock" lock + * + * returns index on success, -ENOENT on failure. + */ + +int mei_me_cl_by_id(struct mei_device *dev, u8 client_id) +{ + int i; + for (i = 0; i < dev->me_clients_num; i++) + if (dev->me_clients[i].client_id == client_id) + break; + if (WARN_ON(dev->me_clients[i].client_id != client_id)) + return -ENOENT; + + if (i == dev->me_clients_num) + return -ENOENT; + + return i; +} + + +/** + * mei_io_list_flush - removes list entry belonging to cl. + * + * @list: An instance of our list structure + * @cl: host client + */ +void mei_io_list_flush(struct mei_cl_cb *list, struct mei_cl *cl) +{ + struct mei_cl_cb *cb; + struct mei_cl_cb *next; + + list_for_each_entry_safe(cb, next, &list->list, list) { + if (cb->cl && mei_cl_cmp_id(cl, cb->cl)) + list_del(&cb->list); + } +} + +/** + * mei_io_cb_free - free mei_cb_private related memory + * + * @cb: mei callback struct + */ +void mei_io_cb_free(struct mei_cl_cb *cb) +{ + if (cb == NULL) + return; + + kfree(cb->request_buffer.data); + kfree(cb->response_buffer.data); + kfree(cb); +} + +/** + * mei_io_cb_init - allocate and initialize io callback + * + * @cl - mei client + * @file: pointer to file structure + * + * returns mei_cl_cb pointer or NULL; + */ +struct mei_cl_cb *mei_io_cb_init(struct mei_cl *cl, struct file *fp) +{ + struct mei_cl_cb *cb; + + cb = kzalloc(sizeof(struct mei_cl_cb), GFP_KERNEL); + if (!cb) + return NULL; + + mei_io_list_init(cb); + + cb->file_object = fp; + cb->cl = cl; + cb->buf_idx = 0; + return cb; +} + +/** + * mei_io_cb_alloc_req_buf - allocate request buffer + * + * @cb - io callback structure + * @size: size of the buffer + * + * returns 0 on success + * -EINVAL if cb is NULL + * -ENOMEM if allocation failed + */ +int mei_io_cb_alloc_req_buf(struct mei_cl_cb *cb, size_t length) +{ + if (!cb) + return -EINVAL; + + if (length == 0) + return 0; + + cb->request_buffer.data = kmalloc(length, GFP_KERNEL); + if (!cb->request_buffer.data) + return -ENOMEM; + cb->request_buffer.size = length; + return 0; +} +/** + * mei_io_cb_alloc_req_buf - allocate respose buffer + * + * @cb - io callback structure + * @size: size of the buffer + * + * returns 0 on success + * -EINVAL if cb is NULL + * -ENOMEM if allocation failed + */ +int mei_io_cb_alloc_resp_buf(struct mei_cl_cb *cb, size_t length) +{ + if (!cb) + return -EINVAL; + + if (length == 0) + return 0; + + cb->response_buffer.data = kmalloc(length, GFP_KERNEL); + if (!cb->response_buffer.data) + return -ENOMEM; + cb->response_buffer.size = length; + return 0; +} + + + +/** + * mei_cl_flush_queues - flushes queue lists belonging to cl. + * + * @dev: the device structure + * @cl: host client + */ +int mei_cl_flush_queues(struct mei_cl *cl) +{ + if (WARN_ON(!cl || !cl->dev)) + return -EINVAL; + + dev_dbg(&cl->dev->pdev->dev, "remove list entry belonging to cl\n"); + mei_io_list_flush(&cl->dev->read_list, cl); + mei_io_list_flush(&cl->dev->write_list, cl); + mei_io_list_flush(&cl->dev->write_waiting_list, cl); + mei_io_list_flush(&cl->dev->ctrl_wr_list, cl); + mei_io_list_flush(&cl->dev->ctrl_rd_list, cl); + mei_io_list_flush(&cl->dev->amthif_cmd_list, cl); + mei_io_list_flush(&cl->dev->amthif_rd_complete_list, cl); + return 0; +} + + +/** + * mei_cl_init - initializes intialize cl. + * + * @cl: host client to be initialized + * @dev: mei device + */ +void mei_cl_init(struct mei_cl *cl, struct mei_device *dev) +{ + memset(cl, 0, sizeof(struct mei_cl)); + init_waitqueue_head(&cl->wait); + init_waitqueue_head(&cl->rx_wait); + init_waitqueue_head(&cl->tx_wait); + INIT_LIST_HEAD(&cl->link); + cl->reading_state = MEI_IDLE; + cl->writing_state = MEI_IDLE; + cl->dev = dev; +} + +/** + * mei_cl_allocate - allocates cl structure and sets it up. + * + * @dev: mei device + * returns The allocated file or NULL on failure + */ +struct mei_cl *mei_cl_allocate(struct mei_device *dev) +{ + struct mei_cl *cl; + + cl = kmalloc(sizeof(struct mei_cl), GFP_KERNEL); + if (!cl) + return NULL; + + mei_cl_init(cl, dev); + + return cl; +} + +/** + * mei_cl_find_read_cb - find this cl's callback in the read list + * + * @dev: device structure + * returns cb on success, NULL on error + */ +struct mei_cl_cb *mei_cl_find_read_cb(struct mei_cl *cl) +{ + struct mei_device *dev = cl->dev; + struct mei_cl_cb *cb = NULL; + struct mei_cl_cb *next = NULL; + + list_for_each_entry_safe(cb, next, &dev->read_list.list, list) + if (mei_cl_cmp_id(cl, cb->cl)) + return cb; + return NULL; +} + +/** mei_cl_link: allocte host id in the host map + * + * @cl - host client + * @id - fixed host id or -1 for genereting one + * returns 0 on success + * -EINVAL on incorrect values + * -ENONET if client not found + */ +int mei_cl_link(struct mei_cl *cl, int id) +{ + struct mei_device *dev; + + if (WARN_ON(!cl || !cl->dev)) + return -EINVAL; + + dev = cl->dev; + + /* If Id is not asigned get one*/ + if (id == MEI_HOST_CLIENT_ID_ANY) + id = find_first_zero_bit(dev->host_clients_map, + MEI_CLIENTS_MAX); + + if (id >= MEI_CLIENTS_MAX) { + dev_err(&dev->pdev->dev, "id exceded %d", MEI_CLIENTS_MAX) ; + return -ENOENT; + } + + dev->open_handle_count++; + + cl->host_client_id = id; + list_add_tail(&cl->link, &dev->file_list); + + set_bit(id, dev->host_clients_map); + + cl->state = MEI_FILE_INITIALIZING; + + dev_dbg(&dev->pdev->dev, "link cl host id = %d\n", cl->host_client_id); + return 0; +} + +/** + * mei_cl_unlink - remove me_cl from the list + * + * @dev: the device structure + */ +int mei_cl_unlink(struct mei_cl *cl) +{ + struct mei_device *dev; + struct mei_cl *pos, *next; + + /* don't shout on error exit path */ + if (!cl) + return 0; + + /* wd and amthif might not be initialized */ + if (!cl->dev) + return 0; + + dev = cl->dev; + + list_for_each_entry_safe(pos, next, &dev->file_list, link) { + if (cl->host_client_id == pos->host_client_id) { + dev_dbg(&dev->pdev->dev, "remove host client = %d, ME client = %d\n", + pos->host_client_id, pos->me_client_id); + list_del_init(&pos->link); + break; + } + } + return 0; +} + + +void mei_host_client_init(struct work_struct *work) +{ + struct mei_device *dev = container_of(work, + struct mei_device, init_work); + struct mei_client_properties *client_props; + int i; + + mutex_lock(&dev->device_lock); + + bitmap_zero(dev->host_clients_map, MEI_CLIENTS_MAX); + dev->open_handle_count = 0; + + /* + * Reserving the first three client IDs + * 0: Reserved for MEI Bus Message communications + * 1: Reserved for Watchdog + * 2: Reserved for AMTHI + */ + bitmap_set(dev->host_clients_map, 0, 3); + + for (i = 0; i < dev->me_clients_num; i++) { + client_props = &dev->me_clients[i].props; + + if (!uuid_le_cmp(client_props->protocol_name, mei_amthif_guid)) + mei_amthif_host_init(dev); + else if (!uuid_le_cmp(client_props->protocol_name, mei_wd_guid)) + mei_wd_host_init(dev); + } + + dev->dev_state = MEI_DEV_ENABLED; + + mutex_unlock(&dev->device_lock); +} + + +/** + * mei_cl_disconnect - disconnect host clinet form the me one + * + * @cl: host client + * + * Locking: called under "dev->device_lock" lock + * + * returns 0 on success, <0 on failure. + */ +int mei_cl_disconnect(struct mei_cl *cl) +{ + struct mei_device *dev; + struct mei_cl_cb *cb; + int rets, err; + + if (WARN_ON(!cl || !cl->dev)) + return -ENODEV; + + dev = cl->dev; + + if (cl->state != MEI_FILE_DISCONNECTING) + return 0; + + cb = mei_io_cb_init(cl, NULL); + if (!cb) + return -ENOMEM; + + cb->fop_type = MEI_FOP_CLOSE; + if (dev->hbuf_is_ready) { + dev->hbuf_is_ready = false; + if (mei_hbm_cl_disconnect_req(dev, cl)) { + rets = -ENODEV; + dev_err(&dev->pdev->dev, "failed to disconnect.\n"); + goto free; + } + mdelay(10); /* Wait for hardware disconnection ready */ + list_add_tail(&cb->list, &dev->ctrl_rd_list.list); + } else { + dev_dbg(&dev->pdev->dev, "add disconnect cb to control write list\n"); + list_add_tail(&cb->list, &dev->ctrl_wr_list.list); + + } + mutex_unlock(&dev->device_lock); + + err = wait_event_timeout(dev->wait_recvd_msg, + MEI_FILE_DISCONNECTED == cl->state, + mei_secs_to_jiffies(MEI_CL_CONNECT_TIMEOUT)); + + mutex_lock(&dev->device_lock); + if (MEI_FILE_DISCONNECTED == cl->state) { + rets = 0; + dev_dbg(&dev->pdev->dev, "successfully disconnected from FW client.\n"); + } else { + rets = -ENODEV; + if (MEI_FILE_DISCONNECTED != cl->state) + dev_dbg(&dev->pdev->dev, "wrong status client disconnect.\n"); + + if (err) + dev_dbg(&dev->pdev->dev, + "wait failed disconnect err=%08x\n", + err); + + dev_dbg(&dev->pdev->dev, "failed to disconnect from FW client.\n"); + } + + mei_io_list_flush(&dev->ctrl_rd_list, cl); + mei_io_list_flush(&dev->ctrl_wr_list, cl); +free: + mei_io_cb_free(cb); + return rets; +} + + +/** + * mei_cl_is_other_connecting - checks if other + * client with the same me client id is connecting + * + * @cl: private data of the file object + * + * returns ture if other client is connected, 0 - otherwise. + */ +bool mei_cl_is_other_connecting(struct mei_cl *cl) +{ + struct mei_device *dev; + struct mei_cl *pos; + struct mei_cl *next; + + if (WARN_ON(!cl || !cl->dev)) + return false; + + dev = cl->dev; + + list_for_each_entry_safe(pos, next, &dev->file_list, link) { + if ((pos->state == MEI_FILE_CONNECTING) && + (pos != cl) && cl->me_client_id == pos->me_client_id) + return true; + + } + + return false; +} + +/** + * mei_cl_connect - connect host clinet to the me one + * + * @cl: host client + * + * Locking: called under "dev->device_lock" lock + * + * returns 0 on success, <0 on failure. + */ +int mei_cl_connect(struct mei_cl *cl, struct file *file) +{ + struct mei_device *dev; + struct mei_cl_cb *cb; + long timeout = mei_secs_to_jiffies(MEI_CL_CONNECT_TIMEOUT); + int rets; + + if (WARN_ON(!cl || !cl->dev)) + return -ENODEV; + + dev = cl->dev; + + cb = mei_io_cb_init(cl, file); + if (!cb) { + rets = -ENOMEM; + goto out; + } + + cb->fop_type = MEI_FOP_IOCTL; + + if (dev->hbuf_is_ready && !mei_cl_is_other_connecting(cl)) { + dev->hbuf_is_ready = false; + + if (mei_hbm_cl_connect_req(dev, cl)) { + rets = -ENODEV; + goto out; + } + cl->timer_count = MEI_CONNECT_TIMEOUT; + list_add_tail(&cb->list, &dev->ctrl_rd_list.list); + } else { + list_add_tail(&cb->list, &dev->ctrl_wr_list.list); + } + + mutex_unlock(&dev->device_lock); + rets = wait_event_timeout(dev->wait_recvd_msg, + (cl->state == MEI_FILE_CONNECTED || + cl->state == MEI_FILE_DISCONNECTED), + timeout * HZ); + mutex_lock(&dev->device_lock); + + if (cl->state != MEI_FILE_CONNECTED) { + rets = -EFAULT; + + mei_io_list_flush(&dev->ctrl_rd_list, cl); + mei_io_list_flush(&dev->ctrl_wr_list, cl); + goto out; + } + + rets = cl->status; + +out: + mei_io_cb_free(cb); + return rets; +} + +/** + * mei_cl_flow_ctrl_creds - checks flow_control credits for cl. + * + * @dev: the device structure + * @cl: private data of the file object + * + * returns 1 if mei_flow_ctrl_creds >0, 0 - otherwise. + * -ENOENT if mei_cl is not present + * -EINVAL if single_recv_buf == 0 + */ +int mei_cl_flow_ctrl_creds(struct mei_cl *cl) +{ + struct mei_device *dev; + int i; + + if (WARN_ON(!cl || !cl->dev)) + return -EINVAL; + + dev = cl->dev; + + if (!dev->me_clients_num) + return 0; + + if (cl->mei_flow_ctrl_creds > 0) + return 1; + + for (i = 0; i < dev->me_clients_num; i++) { + struct mei_me_client *me_cl = &dev->me_clients[i]; + if (me_cl->client_id == cl->me_client_id) { + if (me_cl->mei_flow_ctrl_creds) { + if (WARN_ON(me_cl->props.single_recv_buf == 0)) + return -EINVAL; + return 1; + } else { + return 0; + } + } + } + return -ENOENT; +} + +/** + * mei_cl_flow_ctrl_reduce - reduces flow_control. + * + * @dev: the device structure + * @cl: private data of the file object + * @returns + * 0 on success + * -ENOENT when me client is not found + * -EINVAL when ctrl credits are <= 0 + */ +int mei_cl_flow_ctrl_reduce(struct mei_cl *cl) +{ + struct mei_device *dev; + int i; + + if (WARN_ON(!cl || !cl->dev)) + return -EINVAL; + + dev = cl->dev; + + if (!dev->me_clients_num) + return -ENOENT; + + for (i = 0; i < dev->me_clients_num; i++) { + struct mei_me_client *me_cl = &dev->me_clients[i]; + if (me_cl->client_id == cl->me_client_id) { + if (me_cl->props.single_recv_buf != 0) { + if (WARN_ON(me_cl->mei_flow_ctrl_creds <= 0)) + return -EINVAL; + dev->me_clients[i].mei_flow_ctrl_creds--; + } else { + if (WARN_ON(cl->mei_flow_ctrl_creds <= 0)) + return -EINVAL; + cl->mei_flow_ctrl_creds--; + } + return 0; + } + } + return -ENOENT; +} + +/** + * mei_cl_start_read - the start read client message function. + * + * @cl: host client + * + * returns 0 on success, <0 on failure. + */ +int mei_cl_read_start(struct mei_cl *cl) +{ + struct mei_device *dev; + struct mei_cl_cb *cb; + int rets; + int i; + + if (WARN_ON(!cl || !cl->dev)) + return -ENODEV; + + dev = cl->dev; + + if (cl->state != MEI_FILE_CONNECTED) + return -ENODEV; + + if (dev->dev_state != MEI_DEV_ENABLED) + return -ENODEV; + + if (cl->read_cb) { + dev_dbg(&dev->pdev->dev, "read is pending.\n"); + return -EBUSY; + } + i = mei_me_cl_by_id(dev, cl->me_client_id); + if (i < 0) { + dev_err(&dev->pdev->dev, "no such me client %d\n", + cl->me_client_id); + return -ENODEV; + } + + cb = mei_io_cb_init(cl, NULL); + if (!cb) + return -ENOMEM; + + rets = mei_io_cb_alloc_resp_buf(cb, + dev->me_clients[i].props.max_msg_length); + if (rets) + goto err; + + cb->fop_type = MEI_FOP_READ; + cl->read_cb = cb; + if (dev->hbuf_is_ready) { + dev->hbuf_is_ready = false; + if (mei_hbm_cl_flow_control_req(dev, cl)) { + rets = -ENODEV; + goto err; + } + list_add_tail(&cb->list, &dev->read_list.list); + } else { + list_add_tail(&cb->list, &dev->ctrl_wr_list.list); + } + return rets; +err: + mei_io_cb_free(cb); + return rets; +} + +/** + * mei_cl_all_disconnect - disconnect forcefully all connected clients + * + * @dev - mei device + */ + +void mei_cl_all_disconnect(struct mei_device *dev) +{ + struct mei_cl *cl, *next; + + list_for_each_entry_safe(cl, next, &dev->file_list, link) { + cl->state = MEI_FILE_DISCONNECTED; + cl->mei_flow_ctrl_creds = 0; + cl->read_cb = NULL; + cl->timer_count = 0; + } +} + + +/** + * mei_cl_all_read_wakeup - wake up all readings so they can be interrupted + * + * @dev - mei device + */ +void mei_cl_all_read_wakeup(struct mei_device *dev) +{ + struct mei_cl *cl, *next; + list_for_each_entry_safe(cl, next, &dev->file_list, link) { + if (waitqueue_active(&cl->rx_wait)) { + dev_dbg(&dev->pdev->dev, "Waking up client!\n"); + wake_up_interruptible(&cl->rx_wait); + } + } +} + +/** + * mei_cl_all_write_clear - clear all pending writes + + * @dev - mei device + */ +void mei_cl_all_write_clear(struct mei_device *dev) +{ + struct mei_cl_cb *cb, *next; + + list_for_each_entry_safe(cb, next, &dev->write_list.list, list) { + list_del(&cb->list); + mei_io_cb_free(cb); + } +} + + diff --git a/drivers/misc/mei/client.h b/drivers/misc/mei/client.h new file mode 100644 index 000000000000..214b2397ec3e --- /dev/null +++ b/drivers/misc/mei/client.h @@ -0,0 +1,102 @@ +/* + * + * Intel Management Engine Interface (Intel MEI) Linux driver + * Copyright (c) 2003-2012, Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + */ + +#ifndef _MEI_CLIENT_H_ +#define _MEI_CLIENT_H_ + +#include <linux/types.h> +#include <linux/watchdog.h> +#include <linux/poll.h> +#include <linux/mei.h> + +#include "mei_dev.h" + +int mei_me_cl_by_uuid(const struct mei_device *dev, const uuid_le *cuuid); +int mei_me_cl_by_id(struct mei_device *dev, u8 client_id); + +/* + * MEI IO Functions + */ +struct mei_cl_cb *mei_io_cb_init(struct mei_cl *cl, struct file *fp); +void mei_io_cb_free(struct mei_cl_cb *priv_cb); +int mei_io_cb_alloc_req_buf(struct mei_cl_cb *cb, size_t length); +int mei_io_cb_alloc_resp_buf(struct mei_cl_cb *cb, size_t length); + + +/** + * mei_io_list_init - Sets up a queue list. + * + * @list: An instance cl callback structure + */ +static inline void mei_io_list_init(struct mei_cl_cb *list) +{ + INIT_LIST_HEAD(&list->list); +} +void mei_io_list_flush(struct mei_cl_cb *list, struct mei_cl *cl); + +/* + * MEI Host Client Functions + */ + +struct mei_cl *mei_cl_allocate(struct mei_device *dev); +void mei_cl_init(struct mei_cl *cl, struct mei_device *dev); + + +int mei_cl_link(struct mei_cl *cl, int id); +int mei_cl_unlink(struct mei_cl *cl); + +int mei_cl_flush_queues(struct mei_cl *cl); +struct mei_cl_cb *mei_cl_find_read_cb(struct mei_cl *cl); + +/** + * mei_cl_cmp_id - tells if file private data have same id + * + * @fe1: private data of 1. file object + * @fe2: private data of 2. file object + * + * returns true - if ids are the same and not NULL + */ +static inline bool mei_cl_cmp_id(const struct mei_cl *cl1, + const struct mei_cl *cl2) +{ + return cl1 && cl2 && + (cl1->host_client_id == cl2->host_client_id) && + (cl1->me_client_id == cl2->me_client_id); +} + + +int mei_cl_flow_ctrl_creds(struct mei_cl *cl); + +int mei_cl_flow_ctrl_reduce(struct mei_cl *cl); +/* + * MEI input output function prototype + */ +bool mei_cl_is_other_connecting(struct mei_cl *cl); +int mei_cl_disconnect(struct mei_cl *cl); + +int mei_cl_read_start(struct mei_cl *cl); + +int mei_cl_connect(struct mei_cl *cl, struct file *file); + +void mei_host_client_init(struct work_struct *work); + + +void mei_cl_all_disconnect(struct mei_device *dev); +void mei_cl_all_read_wakeup(struct mei_device *dev); +void mei_cl_all_write_clear(struct mei_device *dev); + + +#endif /* _MEI_CLIENT_H_ */ diff --git a/drivers/misc/mei/hbm.c b/drivers/misc/mei/hbm.c new file mode 100644 index 000000000000..fb9e63ba3bb1 --- /dev/null +++ b/drivers/misc/mei/hbm.c @@ -0,0 +1,669 @@ +/* + * + * Intel Management Engine Interface (Intel MEI) Linux driver + * Copyright (c) 2003-2012, Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + */ + +#include <linux/pci.h> +#include <linux/sched.h> +#include <linux/wait.h> +#include <linux/mei.h> + +#include "mei_dev.h" +#include "hbm.h" +#include "hw-me.h" + +/** + * mei_hbm_me_cl_allocate - allocates storage for me clients + * + * @dev: the device structure + * + * returns none. + */ +static void mei_hbm_me_cl_allocate(struct mei_device *dev) +{ + struct mei_me_client *clients; + int b; + + /* count how many ME clients we have */ + for_each_set_bit(b, dev->me_clients_map, MEI_CLIENTS_MAX) + dev->me_clients_num++; + + if (dev->me_clients_num <= 0) + return; + + kfree(dev->me_clients); + dev->me_clients = NULL; + + dev_dbg(&dev->pdev->dev, "memory allocation for ME clients size=%zd.\n", + dev->me_clients_num * sizeof(struct mei_me_client)); + /* allocate storage for ME clients representation */ + clients = kcalloc(dev->me_clients_num, + sizeof(struct mei_me_client), GFP_KERNEL); + if (!clients) { + dev_err(&dev->pdev->dev, "memory allocation for ME clients failed.\n"); + dev->dev_state = MEI_DEV_RESETING; + mei_reset(dev, 1); + return; + } + dev->me_clients = clients; + return; +} + +/** + * mei_hbm_cl_hdr - construct client hbm header + * @cl: - client + * @hbm_cmd: host bus message command + * @buf: buffer for cl header + * @len: buffer length + */ +static inline +void mei_hbm_cl_hdr(struct mei_cl *cl, u8 hbm_cmd, void *buf, size_t len) +{ + struct mei_hbm_cl_cmd *cmd = buf; + + memset(cmd, 0, len); + + cmd->hbm_cmd = hbm_cmd; + cmd->host_addr = cl->host_client_id; + cmd->me_addr = cl->me_client_id; +} + +/** + * same_disconn_addr - tells if they have the same address + * + * @file: private data of the file object. + * @disconn: disconnection request. + * + * returns true if addres are same + */ +static inline +bool mei_hbm_cl_addr_equal(struct mei_cl *cl, void *buf) +{ + struct mei_hbm_cl_cmd *cmd = buf; + return cl->host_client_id == cmd->host_addr && + cl->me_client_id == cmd->me_addr; +} + + +/** + * is_treat_specially_client - checks if the message belongs + * to the file private data. + * + * @cl: private data of the file object + * @rs: connect response bus message + * + */ +static bool is_treat_specially_client(struct mei_cl *cl, + struct hbm_client_connect_response *rs) +{ + if (mei_hbm_cl_addr_equal(cl, rs)) { + if (!rs->status) { + cl->state = MEI_FILE_CONNECTED; + cl->status = 0; + + } else { + cl->state = MEI_FILE_DISCONNECTED; + cl->status = -ENODEV; + } + cl->timer_count = 0; + + return true; + } + return false; +} + +/** + * mei_hbm_start_req - sends start request message. + * + * @dev: the device structure + */ +void mei_hbm_start_req(struct mei_device *dev) +{ + struct mei_msg_hdr *mei_hdr = &dev->wr_msg.hdr; + struct hbm_host_version_request *start_req; + const size_t len = sizeof(struct hbm_host_version_request); + + mei_hbm_hdr(mei_hdr, len); + + /* host start message */ + start_req = (struct hbm_host_version_request *)dev->wr_msg.data; + memset(start_req, 0, len); + start_req->hbm_cmd = HOST_START_REQ_CMD; + start_req->host_version.major_version = HBM_MAJOR_VERSION; + start_req->host_version.minor_version = HBM_MINOR_VERSION; + + dev->recvd_msg = false; + if (mei_write_message(dev, mei_hdr, dev->wr_msg.data)) { + dev_dbg(&dev->pdev->dev, "write send version message to FW fail.\n"); + dev->dev_state = MEI_DEV_RESETING; + mei_reset(dev, 1); + } + dev->init_clients_state = MEI_START_MESSAGE; + dev->init_clients_timer = MEI_CLIENTS_INIT_TIMEOUT; + return ; +} + +/** + * mei_hbm_enum_clients_req - sends enumeration client request message. + * + * @dev: the device structure + * + * returns none. + */ +static void mei_hbm_enum_clients_req(struct mei_device *dev) +{ + struct mei_msg_hdr *mei_hdr = &dev->wr_msg.hdr; + struct hbm_host_enum_request *enum_req; + const size_t len = sizeof(struct hbm_host_enum_request); + /* enumerate clients */ + mei_hbm_hdr(mei_hdr, len); + + enum_req = (struct hbm_host_enum_request *)dev->wr_msg.data; + memset(enum_req, 0, len); + enum_req->hbm_cmd = HOST_ENUM_REQ_CMD; + + if (mei_write_message(dev, mei_hdr, dev->wr_msg.data)) { + dev->dev_state = MEI_DEV_RESETING; + dev_dbg(&dev->pdev->dev, "write send enumeration request message to FW fail.\n"); + mei_reset(dev, 1); + } + dev->init_clients_state = MEI_ENUM_CLIENTS_MESSAGE; + dev->init_clients_timer = MEI_CLIENTS_INIT_TIMEOUT; + return; +} + +/** + * mei_hbm_prop_requsest - request property for a single client + * + * @dev: the device structure + * + * returns none. + */ + +static int mei_hbm_prop_req(struct mei_device *dev) +{ + + struct mei_msg_hdr *mei_hdr = &dev->wr_msg.hdr; + struct hbm_props_request *prop_req; + const size_t len = sizeof(struct hbm_props_request); + unsigned long next_client_index; + u8 client_num; + + + client_num = dev->me_client_presentation_num; + + next_client_index = find_next_bit(dev->me_clients_map, MEI_CLIENTS_MAX, + dev->me_client_index); + + /* We got all client properties */ + if (next_client_index == MEI_CLIENTS_MAX) { + schedule_work(&dev->init_work); + + return 0; + } + + dev->me_clients[client_num].client_id = next_client_index; + dev->me_clients[client_num].mei_flow_ctrl_creds = 0; + + mei_hbm_hdr(mei_hdr, len); + prop_req = (struct hbm_props_request *)dev->wr_msg.data; + + memset(prop_req, 0, sizeof(struct hbm_props_request)); + + + prop_req->hbm_cmd = HOST_CLIENT_PROPERTIES_REQ_CMD; + prop_req->address = next_client_index; + + if (mei_write_message(dev, mei_hdr, dev->wr_msg.data)) { + dev->dev_state = MEI_DEV_RESETING; + dev_err(&dev->pdev->dev, "Properties request command failed\n"); + mei_reset(dev, 1); + + return -EIO; + } + + dev->init_clients_timer = MEI_CLIENTS_INIT_TIMEOUT; + dev->me_client_index = next_client_index; + + return 0; +} + +/** + * mei_hbm_stop_req_prepare - perpare stop request message + * + * @dev - mei device + * @mei_hdr - mei message header + * @data - hbm message body buffer + */ +static void mei_hbm_stop_req_prepare(struct mei_device *dev, + struct mei_msg_hdr *mei_hdr, unsigned char *data) +{ + struct hbm_host_stop_request *req = + (struct hbm_host_stop_request *)data; + const size_t len = sizeof(struct hbm_host_stop_request); + + mei_hbm_hdr(mei_hdr, len); + + memset(req, 0, len); + req->hbm_cmd = HOST_STOP_REQ_CMD; + req->reason = DRIVER_STOP_REQUEST; +} + +/** + * mei_hbm_cl_flow_control_req - sends flow control requst. + * + * @dev: the device structure + * @cl: client info + * + * This function returns -EIO on write failure + */ +int mei_hbm_cl_flow_control_req(struct mei_device *dev, struct mei_cl *cl) +{ + struct mei_msg_hdr *mei_hdr = &dev->wr_msg.hdr; + const size_t len = sizeof(struct hbm_flow_control); + + mei_hbm_hdr(mei_hdr, len); + mei_hbm_cl_hdr(cl, MEI_FLOW_CONTROL_CMD, dev->wr_msg.data, len); + + dev_dbg(&dev->pdev->dev, "sending flow control host client = %d, ME client = %d\n", + cl->host_client_id, cl->me_client_id); + + return mei_write_message(dev, mei_hdr, dev->wr_msg.data); +} + +/** + * add_single_flow_creds - adds single buffer credentials. + * + * @file: private data ot the file object. + * @flow: flow control. + */ +static void mei_hbm_add_single_flow_creds(struct mei_device *dev, + struct hbm_flow_control *flow) +{ + struct mei_me_client *client; + int i; + + for (i = 0; i < dev->me_clients_num; i++) { + client = &dev->me_clients[i]; + if (client && flow->me_addr == client->client_id) { + if (client->props.single_recv_buf) { + client->mei_flow_ctrl_creds++; + dev_dbg(&dev->pdev->dev, "recv flow ctrl msg ME %d (single).\n", + flow->me_addr); + dev_dbg(&dev->pdev->dev, "flow control credentials =%d.\n", + client->mei_flow_ctrl_creds); + } else { + BUG(); /* error in flow control */ + } + } + } +} + +/** + * mei_hbm_cl_flow_control_res - flow control response from me + * + * @dev: the device structure + * @flow_control: flow control response bus message + */ +static void mei_hbm_cl_flow_control_res(struct mei_device *dev, + struct hbm_flow_control *flow_control) +{ + struct mei_cl *cl = NULL; + struct mei_cl *next = NULL; + + if (!flow_control->host_addr) { + /* single receive buffer */ + mei_hbm_add_single_flow_creds(dev, flow_control); + return; + } + + /* normal connection */ + list_for_each_entry_safe(cl, next, &dev->file_list, link) { + if (mei_hbm_cl_addr_equal(cl, flow_control)) { + cl->mei_flow_ctrl_creds++; + dev_dbg(&dev->pdev->dev, "flow ctrl msg for host %d ME %d.\n", + flow_control->host_addr, flow_control->me_addr); + dev_dbg(&dev->pdev->dev, "flow control credentials = %d.\n", + cl->mei_flow_ctrl_creds); + break; + } + } +} + + +/** + * mei_hbm_cl_disconnect_req - sends disconnect message to fw. + * + * @dev: the device structure + * @cl: a client to disconnect from + * + * This function returns -EIO on write failure + */ +int mei_hbm_cl_disconnect_req(struct mei_device *dev, struct mei_cl *cl) +{ + struct mei_msg_hdr *mei_hdr = &dev->wr_msg.hdr; + const size_t len = sizeof(struct hbm_client_connect_request); + + mei_hbm_hdr(mei_hdr, len); + mei_hbm_cl_hdr(cl, CLIENT_DISCONNECT_REQ_CMD, dev->wr_msg.data, len); + + return mei_write_message(dev, mei_hdr, dev->wr_msg.data); +} + +/** + * mei_hbm_cl_disconnect_res - disconnect response from ME + * + * @dev: the device structure + * @rs: disconnect response bus message + */ +static void mei_hbm_cl_disconnect_res(struct mei_device *dev, + struct hbm_client_connect_response *rs) +{ + struct mei_cl *cl; + struct mei_cl_cb *pos = NULL, *next = NULL; + + dev_dbg(&dev->pdev->dev, + "disconnect_response:\n" + "ME Client = %d\n" + "Host Client = %d\n" + "Status = %d\n", + rs->me_addr, + rs->host_addr, + rs->status); + + list_for_each_entry_safe(pos, next, &dev->ctrl_rd_list.list, list) { + cl = pos->cl; + + if (!cl) { + list_del(&pos->list); + return; + } + + dev_dbg(&dev->pdev->dev, "list_for_each_entry_safe in ctrl_rd_list.\n"); + if (mei_hbm_cl_addr_equal(cl, rs)) { + list_del(&pos->list); + if (!rs->status) + cl->state = MEI_FILE_DISCONNECTED; + + cl->status = 0; + cl->timer_count = 0; + break; + } + } +} + +/** + * mei_hbm_cl_connect_req - send connection request to specific me client + * + * @dev: the device structure + * @cl: a client to connect to + * + * returns -EIO on write failure + */ +int mei_hbm_cl_connect_req(struct mei_device *dev, struct mei_cl *cl) +{ + struct mei_msg_hdr *mei_hdr = &dev->wr_msg.hdr; + const size_t len = sizeof(struct hbm_client_connect_request); + + mei_hbm_hdr(mei_hdr, len); + mei_hbm_cl_hdr(cl, CLIENT_CONNECT_REQ_CMD, dev->wr_msg.data, len); + + return mei_write_message(dev, mei_hdr, dev->wr_msg.data); +} + +/** + * mei_hbm_cl_connect_res - connect resposne from the ME + * + * @dev: the device structure + * @rs: connect response bus message + */ +static void mei_hbm_cl_connect_res(struct mei_device *dev, + struct hbm_client_connect_response *rs) +{ + + struct mei_cl *cl; + struct mei_cl_cb *pos = NULL, *next = NULL; + + dev_dbg(&dev->pdev->dev, + "connect_response:\n" + "ME Client = %d\n" + "Host Client = %d\n" + "Status = %d\n", + rs->me_addr, + rs->host_addr, + rs->status); + + /* if WD or iamthif client treat specially */ + + if (is_treat_specially_client(&dev->wd_cl, rs)) { + dev_dbg(&dev->pdev->dev, "successfully connected to WD client.\n"); + mei_watchdog_register(dev); + + return; + } + + if (is_treat_specially_client(&dev->iamthif_cl, rs)) { + dev->iamthif_state = MEI_IAMTHIF_IDLE; + return; + } + list_for_each_entry_safe(pos, next, &dev->ctrl_rd_list.list, list) { + + cl = pos->cl; + if (!cl) { + list_del(&pos->list); + return; + } + if (pos->fop_type == MEI_FOP_IOCTL) { + if (is_treat_specially_client(cl, rs)) { + list_del(&pos->list); + cl->status = 0; + cl->timer_count = 0; + break; + } + } + } +} + + +/** + * mei_client_disconnect_request - disconnect request initiated by me + * host sends disoconnect response + * + * @dev: the device structure. + * @disconnect_req: disconnect request bus message from the me + */ +static void mei_hbm_fw_disconnect_req(struct mei_device *dev, + struct hbm_client_connect_request *disconnect_req) +{ + struct mei_cl *cl, *next; + const size_t len = sizeof(struct hbm_client_connect_response); + + list_for_each_entry_safe(cl, next, &dev->file_list, link) { + if (mei_hbm_cl_addr_equal(cl, disconnect_req)) { + dev_dbg(&dev->pdev->dev, "disconnect request host client %d ME client %d.\n", + disconnect_req->host_addr, + disconnect_req->me_addr); + cl->state = MEI_FILE_DISCONNECTED; + cl->timer_count = 0; + if (cl == &dev->wd_cl) + dev->wd_pending = false; + else if (cl == &dev->iamthif_cl) + dev->iamthif_timer = 0; + + /* prepare disconnect response */ + mei_hbm_hdr(&dev->wr_ext_msg.hdr, len); + mei_hbm_cl_hdr(cl, CLIENT_DISCONNECT_RES_CMD, + dev->wr_ext_msg.data, len); + break; + } + } +} + + +/** + * mei_hbm_dispatch - bottom half read routine after ISR to + * handle the read bus message cmd processing. + * + * @dev: the device structure + * @mei_hdr: header of bus message + */ +void mei_hbm_dispatch(struct mei_device *dev, struct mei_msg_hdr *hdr) +{ + struct mei_bus_message *mei_msg; + struct mei_me_client *me_client; + struct hbm_host_version_response *version_res; + struct hbm_client_connect_response *connect_res; + struct hbm_client_connect_response *disconnect_res; + struct hbm_client_connect_request *disconnect_req; + struct hbm_flow_control *flow_control; + struct hbm_props_response *props_res; + struct hbm_host_enum_response *enum_res; + + /* read the message to our buffer */ + BUG_ON(hdr->length >= sizeof(dev->rd_msg_buf)); + mei_read_slots(dev, dev->rd_msg_buf, hdr->length); + mei_msg = (struct mei_bus_message *)dev->rd_msg_buf; + + switch (mei_msg->hbm_cmd) { + case HOST_START_RES_CMD: + version_res = (struct hbm_host_version_response *)mei_msg; + if (!version_res->host_version_supported) { + dev->version = version_res->me_max_version; + dev_dbg(&dev->pdev->dev, "version mismatch.\n"); + + mei_hbm_stop_req_prepare(dev, &dev->wr_msg.hdr, + dev->wr_msg.data); + mei_write_message(dev, &dev->wr_msg.hdr, + dev->wr_msg.data); + return; + } + + dev->version.major_version = HBM_MAJOR_VERSION; + dev->version.minor_version = HBM_MINOR_VERSION; + if (dev->dev_state == MEI_DEV_INIT_CLIENTS && + dev->init_clients_state == MEI_START_MESSAGE) { + dev->init_clients_timer = 0; + mei_hbm_enum_clients_req(dev); + } else { + dev->recvd_msg = false; + dev_dbg(&dev->pdev->dev, "reset due to received hbm: host start\n"); + mei_reset(dev, 1); + return; + } + + dev->recvd_msg = true; + dev_dbg(&dev->pdev->dev, "host start response message received.\n"); + break; + + case CLIENT_CONNECT_RES_CMD: + connect_res = (struct hbm_client_connect_response *) mei_msg; + mei_hbm_cl_connect_res(dev, connect_res); + dev_dbg(&dev->pdev->dev, "client connect response message received.\n"); + wake_up(&dev->wait_recvd_msg); + break; + + case CLIENT_DISCONNECT_RES_CMD: + disconnect_res = (struct hbm_client_connect_response *) mei_msg; + mei_hbm_cl_disconnect_res(dev, disconnect_res); + dev_dbg(&dev->pdev->dev, "client disconnect response message received.\n"); + wake_up(&dev->wait_recvd_msg); + break; + + case MEI_FLOW_CONTROL_CMD: + flow_control = (struct hbm_flow_control *) mei_msg; + mei_hbm_cl_flow_control_res(dev, flow_control); + dev_dbg(&dev->pdev->dev, "client flow control response message received.\n"); + break; + + case HOST_CLIENT_PROPERTIES_RES_CMD: + props_res = (struct hbm_props_response *)mei_msg; + me_client = &dev->me_clients[dev->me_client_presentation_num]; + + if (props_res->status || !dev->me_clients) { + dev_dbg(&dev->pdev->dev, "reset due to received host client properties response bus message wrong status.\n"); + mei_reset(dev, 1); + return; + } + + if (me_client->client_id != props_res->address) { + dev_err(&dev->pdev->dev, + "Host client properties reply mismatch\n"); + mei_reset(dev, 1); + + return; + } + + if (dev->dev_state != MEI_DEV_INIT_CLIENTS || + dev->init_clients_state != MEI_CLIENT_PROPERTIES_MESSAGE) { + dev_err(&dev->pdev->dev, + "Unexpected client properties reply\n"); + mei_reset(dev, 1); + + return; + } + + me_client->props = props_res->client_properties; + dev->me_client_index++; + dev->me_client_presentation_num++; + + /* request property for the next client */ + mei_hbm_prop_req(dev); + + break; + + case HOST_ENUM_RES_CMD: + enum_res = (struct hbm_host_enum_response *) mei_msg; + memcpy(dev->me_clients_map, enum_res->valid_addresses, 32); + if (dev->dev_state == MEI_DEV_INIT_CLIENTS && + dev->init_clients_state == MEI_ENUM_CLIENTS_MESSAGE) { + dev->init_clients_timer = 0; + dev->me_client_presentation_num = 0; + dev->me_client_index = 0; + mei_hbm_me_cl_allocate(dev); + dev->init_clients_state = + MEI_CLIENT_PROPERTIES_MESSAGE; + + /* first property reqeust */ + mei_hbm_prop_req(dev); + } else { + dev_dbg(&dev->pdev->dev, "reset due to received host enumeration clients response bus message.\n"); + mei_reset(dev, 1); + return; + } + break; + + case HOST_STOP_RES_CMD: + dev->dev_state = MEI_DEV_DISABLED; + dev_dbg(&dev->pdev->dev, "resetting because of FW stop response.\n"); + mei_reset(dev, 1); + break; + + case CLIENT_DISCONNECT_REQ_CMD: + /* search for client */ + disconnect_req = (struct hbm_client_connect_request *)mei_msg; + mei_hbm_fw_disconnect_req(dev, disconnect_req); + break; + + case ME_STOP_REQ_CMD: + + mei_hbm_stop_req_prepare(dev, &dev->wr_ext_msg.hdr, + dev->wr_ext_msg.data); + break; + default: + BUG(); + break; + + } +} + diff --git a/drivers/misc/mei/hbm.h b/drivers/misc/mei/hbm.h new file mode 100644 index 000000000000..b552afbaf85c --- /dev/null +++ b/drivers/misc/mei/hbm.h @@ -0,0 +1,39 @@ +/* + * + * Intel Management Engine Interface (Intel MEI) Linux driver + * Copyright (c) 2003-2012, Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + */ + +#ifndef _MEI_HBM_H_ +#define _MEI_HBM_H_ + +void mei_hbm_dispatch(struct mei_device *dev, struct mei_msg_hdr *hdr); + +static inline void mei_hbm_hdr(struct mei_msg_hdr *hdr, size_t length) +{ + hdr->host_addr = 0; + hdr->me_addr = 0; + hdr->length = length; + hdr->msg_complete = 1; + hdr->reserved = 0; +} + +void mei_hbm_start_req(struct mei_device *dev); + +int mei_hbm_cl_flow_control_req(struct mei_device *dev, struct mei_cl *cl); +int mei_hbm_cl_disconnect_req(struct mei_device *dev, struct mei_cl *cl); +int mei_hbm_cl_connect_req(struct mei_device *dev, struct mei_cl *cl); + + +#endif /* _MEI_HBM_H_ */ + diff --git a/drivers/misc/mei/hw-me-regs.h b/drivers/misc/mei/hw-me-regs.h new file mode 100644 index 000000000000..6a203b6e8346 --- /dev/null +++ b/drivers/misc/mei/hw-me-regs.h @@ -0,0 +1,167 @@ +/****************************************************************************** + * Intel Management Engine Interface (Intel MEI) Linux driver + * Intel MEI Interface Header + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2003 - 2012 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, + * USA + * + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * Contact Information: + * Intel Corporation. + * linux-mei@linux.intel.com + * http://www.intel.com + * + * BSD LICENSE + * + * Copyright(c) 2003 - 2012 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + *****************************************************************************/ +#ifndef _MEI_HW_MEI_REGS_H_ +#define _MEI_HW_MEI_REGS_H_ + +/* + * MEI device IDs + */ +#define MEI_DEV_ID_82946GZ 0x2974 /* 82946GZ/GL */ +#define MEI_DEV_ID_82G35 0x2984 /* 82G35 Express */ +#define MEI_DEV_ID_82Q965 0x2994 /* 82Q963/Q965 */ +#define MEI_DEV_ID_82G965 0x29A4 /* 82P965/G965 */ + +#define MEI_DEV_ID_82GM965 0x2A04 /* Mobile PM965/GM965 */ +#define MEI_DEV_ID_82GME965 0x2A14 /* Mobile GME965/GLE960 */ + +#define MEI_DEV_ID_ICH9_82Q35 0x29B4 /* 82Q35 Express */ +#define MEI_DEV_ID_ICH9_82G33 0x29C4 /* 82G33/G31/P35/P31 Express */ +#define MEI_DEV_ID_ICH9_82Q33 0x29D4 /* 82Q33 Express */ +#define MEI_DEV_ID_ICH9_82X38 0x29E4 /* 82X38/X48 Express */ +#define MEI_DEV_ID_ICH9_3200 0x29F4 /* 3200/3210 Server */ + +#define MEI_DEV_ID_ICH9_6 0x28B4 /* Bearlake */ +#define MEI_DEV_ID_ICH9_7 0x28C4 /* Bearlake */ +#define MEI_DEV_ID_ICH9_8 0x28D4 /* Bearlake */ +#define MEI_DEV_ID_ICH9_9 0x28E4 /* Bearlake */ +#define MEI_DEV_ID_ICH9_10 0x28F4 /* Bearlake */ + +#define MEI_DEV_ID_ICH9M_1 0x2A44 /* Cantiga */ +#define MEI_DEV_ID_ICH9M_2 0x2A54 /* Cantiga */ +#define MEI_DEV_ID_ICH9M_3 0x2A64 /* Cantiga */ +#define MEI_DEV_ID_ICH9M_4 0x2A74 /* Cantiga */ + +#define MEI_DEV_ID_ICH10_1 0x2E04 /* Eaglelake */ +#define MEI_DEV_ID_ICH10_2 0x2E14 /* Eaglelake */ +#define MEI_DEV_ID_ICH10_3 0x2E24 /* Eaglelake */ +#define MEI_DEV_ID_ICH10_4 0x2E34 /* Eaglelake */ + +#define MEI_DEV_ID_IBXPK_1 0x3B64 /* Calpella */ +#define MEI_DEV_ID_IBXPK_2 0x3B65 /* Calpella */ + +#define MEI_DEV_ID_CPT_1 0x1C3A /* Couger Point */ +#define MEI_DEV_ID_PBG_1 0x1D3A /* C600/X79 Patsburg */ + +#define MEI_DEV_ID_PPT_1 0x1E3A /* Panther Point */ +#define MEI_DEV_ID_PPT_2 0x1CBA /* Panther Point */ +#define MEI_DEV_ID_PPT_3 0x1DBA /* Panther Point */ + +#define MEI_DEV_ID_LPT 0x8C3A /* Lynx Point */ +#define MEI_DEV_ID_LPT_LP 0x9C3A /* Lynx Point LP */ +/* + * MEI HW Section + */ + +/* MEI registers */ +/* H_CB_WW - Host Circular Buffer (CB) Write Window register */ +#define H_CB_WW 0 +/* H_CSR - Host Control Status register */ +#define H_CSR 4 +/* ME_CB_RW - ME Circular Buffer Read Window register (read only) */ +#define ME_CB_RW 8 +/* ME_CSR_HA - ME Control Status Host Access register (read only) */ +#define ME_CSR_HA 0xC + + +/* register bits of H_CSR (Host Control Status register) */ +/* Host Circular Buffer Depth - maximum number of 32-bit entries in CB */ +#define H_CBD 0xFF000000 +/* Host Circular Buffer Write Pointer */ +#define H_CBWP 0x00FF0000 +/* Host Circular Buffer Read Pointer */ +#define H_CBRP 0x0000FF00 +/* Host Reset */ +#define H_RST 0x00000010 +/* Host Ready */ +#define H_RDY 0x00000008 +/* Host Interrupt Generate */ +#define H_IG 0x00000004 +/* Host Interrupt Status */ +#define H_IS 0x00000002 +/* Host Interrupt Enable */ +#define H_IE 0x00000001 + + +/* register bits of ME_CSR_HA (ME Control Status Host Access register) */ +/* ME CB (Circular Buffer) Depth HRA (Host Read Access) - host read only +access to ME_CBD */ +#define ME_CBD_HRA 0xFF000000 +/* ME CB Write Pointer HRA - host read only access to ME_CBWP */ +#define ME_CBWP_HRA 0x00FF0000 +/* ME CB Read Pointer HRA - host read only access to ME_CBRP */ +#define ME_CBRP_HRA 0x0000FF00 +/* ME Reset HRA - host read only access to ME_RST */ +#define ME_RST_HRA 0x00000010 +/* ME Ready HRA - host read only access to ME_RDY */ +#define ME_RDY_HRA 0x00000008 +/* ME Interrupt Generate HRA - host read only access to ME_IG */ +#define ME_IG_HRA 0x00000004 +/* ME Interrupt Status HRA - host read only access to ME_IS */ +#define ME_IS_HRA 0x00000002 +/* ME Interrupt Enable HRA - host read only access to ME_IE */ +#define ME_IE_HRA 0x00000001 + +#endif /* _MEI_HW_MEI_REGS_H_ */ diff --git a/drivers/misc/mei/hw-me.c b/drivers/misc/mei/hw-me.c new file mode 100644 index 000000000000..45ea7185c003 --- /dev/null +++ b/drivers/misc/mei/hw-me.c @@ -0,0 +1,576 @@ +/* + * + * Intel Management Engine Interface (Intel MEI) Linux driver + * Copyright (c) 2003-2012, Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + */ + +#include <linux/pci.h> + +#include <linux/kthread.h> +#include <linux/interrupt.h> + +#include "mei_dev.h" +#include "hw-me.h" + +#include "hbm.h" + + +/** + * mei_reg_read - Reads 32bit data from the mei device + * + * @dev: the device structure + * @offset: offset from which to read the data + * + * returns register value (u32) + */ +static inline u32 mei_reg_read(const struct mei_me_hw *hw, + unsigned long offset) +{ + return ioread32(hw->mem_addr + offset); +} + + +/** + * mei_reg_write - Writes 32bit data to the mei device + * + * @dev: the device structure + * @offset: offset from which to write the data + * @value: register value to write (u32) + */ +static inline void mei_reg_write(const struct mei_me_hw *hw, + unsigned long offset, u32 value) +{ + iowrite32(value, hw->mem_addr + offset); +} + +/** + * mei_mecbrw_read - Reads 32bit data from ME circular buffer + * read window register + * + * @dev: the device structure + * + * returns ME_CB_RW register value (u32) + */ +static u32 mei_me_mecbrw_read(const struct mei_device *dev) +{ + return mei_reg_read(to_me_hw(dev), ME_CB_RW); +} +/** + * mei_mecsr_read - Reads 32bit data from the ME CSR + * + * @dev: the device structure + * + * returns ME_CSR_HA register value (u32) + */ +static inline u32 mei_mecsr_read(const struct mei_me_hw *hw) +{ + return mei_reg_read(hw, ME_CSR_HA); +} + +/** + * mei_hcsr_read - Reads 32bit data from the host CSR + * + * @dev: the device structure + * + * returns H_CSR register value (u32) + */ +static inline u32 mei_hcsr_read(const struct mei_me_hw *hw) +{ + return mei_reg_read(hw, H_CSR); +} + +/** + * mei_hcsr_set - writes H_CSR register to the mei device, + * and ignores the H_IS bit for it is write-one-to-zero. + * + * @dev: the device structure + */ +static inline void mei_hcsr_set(struct mei_me_hw *hw, u32 hcsr) +{ + hcsr &= ~H_IS; + mei_reg_write(hw, H_CSR, hcsr); +} + + +/** + * me_hw_config - configure hw dependent settings + * + * @dev: mei device + */ +static void mei_me_hw_config(struct mei_device *dev) +{ + u32 hcsr = mei_hcsr_read(to_me_hw(dev)); + /* Doesn't change in runtime */ + dev->hbuf_depth = (hcsr & H_CBD) >> 24; +} +/** + * mei_clear_interrupts - clear and stop interrupts + * + * @dev: the device structure + */ +static void mei_me_intr_clear(struct mei_device *dev) +{ + struct mei_me_hw *hw = to_me_hw(dev); + u32 hcsr = mei_hcsr_read(hw); + if ((hcsr & H_IS) == H_IS) + mei_reg_write(hw, H_CSR, hcsr); +} +/** + * mei_me_intr_enable - enables mei device interrupts + * + * @dev: the device structure + */ +static void mei_me_intr_enable(struct mei_device *dev) +{ + struct mei_me_hw *hw = to_me_hw(dev); + u32 hcsr = mei_hcsr_read(hw); + hcsr |= H_IE; + mei_hcsr_set(hw, hcsr); +} + +/** + * mei_disable_interrupts - disables mei device interrupts + * + * @dev: the device structure + */ +static void mei_me_intr_disable(struct mei_device *dev) +{ + struct mei_me_hw *hw = to_me_hw(dev); + u32 hcsr = mei_hcsr_read(hw); + hcsr &= ~H_IE; + mei_hcsr_set(hw, hcsr); +} + +/** + * mei_me_hw_reset - resets fw via mei csr register. + * + * @dev: the device structure + * @interrupts_enabled: if interrupt should be enabled after reset. + */ +static void mei_me_hw_reset(struct mei_device *dev, bool intr_enable) +{ + struct mei_me_hw *hw = to_me_hw(dev); + u32 hcsr = mei_hcsr_read(hw); + + dev_dbg(&dev->pdev->dev, "before reset HCSR = 0x%08x.\n", hcsr); + + hcsr |= (H_RST | H_IG); + + if (intr_enable) + hcsr |= H_IE; + else + hcsr &= ~H_IE; + + mei_hcsr_set(hw, hcsr); + + hcsr = mei_hcsr_read(hw) | H_IG; + hcsr &= ~H_RST; + + mei_hcsr_set(hw, hcsr); + + hcsr = mei_hcsr_read(hw); + + dev_dbg(&dev->pdev->dev, "current HCSR = 0x%08x.\n", hcsr); +} + +/** + * mei_me_host_set_ready - enable device + * + * @dev - mei device + * returns bool + */ + +static void mei_me_host_set_ready(struct mei_device *dev) +{ + struct mei_me_hw *hw = to_me_hw(dev); + hw->host_hw_state |= H_IE | H_IG | H_RDY; + mei_hcsr_set(hw, hw->host_hw_state); +} +/** + * mei_me_host_is_ready - check whether the host has turned ready + * + * @dev - mei device + * returns bool + */ +static bool mei_me_host_is_ready(struct mei_device *dev) +{ + struct mei_me_hw *hw = to_me_hw(dev); + hw->host_hw_state = mei_hcsr_read(hw); + return (hw->host_hw_state & H_RDY) == H_RDY; +} + +/** + * mei_me_hw_is_ready - check whether the me(hw) has turned ready + * + * @dev - mei device + * returns bool + */ +static bool mei_me_hw_is_ready(struct mei_device *dev) +{ + struct mei_me_hw *hw = to_me_hw(dev); + hw->me_hw_state = mei_mecsr_read(hw); + return (hw->me_hw_state & ME_RDY_HRA) == ME_RDY_HRA; +} + +/** + * mei_hbuf_filled_slots - gets number of device filled buffer slots + * + * @dev: the device structure + * + * returns number of filled slots + */ +static unsigned char mei_hbuf_filled_slots(struct mei_device *dev) +{ + struct mei_me_hw *hw = to_me_hw(dev); + char read_ptr, write_ptr; + + hw->host_hw_state = mei_hcsr_read(hw); + + read_ptr = (char) ((hw->host_hw_state & H_CBRP) >> 8); + write_ptr = (char) ((hw->host_hw_state & H_CBWP) >> 16); + + return (unsigned char) (write_ptr - read_ptr); +} + +/** + * mei_hbuf_is_empty - checks if host buffer is empty. + * + * @dev: the device structure + * + * returns true if empty, false - otherwise. + */ +static bool mei_me_hbuf_is_empty(struct mei_device *dev) +{ + return mei_hbuf_filled_slots(dev) == 0; +} + +/** + * mei_me_hbuf_empty_slots - counts write empty slots. + * + * @dev: the device structure + * + * returns -1(ESLOTS_OVERFLOW) if overflow, otherwise empty slots count + */ +static int mei_me_hbuf_empty_slots(struct mei_device *dev) +{ + unsigned char filled_slots, empty_slots; + + filled_slots = mei_hbuf_filled_slots(dev); + empty_slots = dev->hbuf_depth - filled_slots; + + /* check for overflow */ + if (filled_slots > dev->hbuf_depth) + return -EOVERFLOW; + + return empty_slots; +} + +static size_t mei_me_hbuf_max_len(const struct mei_device *dev) +{ + return dev->hbuf_depth * sizeof(u32) - sizeof(struct mei_msg_hdr); +} + + +/** + * mei_write_message - writes a message to mei device. + * + * @dev: the device structure + * @header: mei HECI header of message + * @buf: message payload will be written + * + * This function returns -EIO if write has failed + */ +static int mei_me_write_message(struct mei_device *dev, + struct mei_msg_hdr *header, + unsigned char *buf) +{ + struct mei_me_hw *hw = to_me_hw(dev); + unsigned long rem, dw_cnt; + unsigned long length = header->length; + u32 *reg_buf = (u32 *)buf; + u32 hcsr; + int i; + int empty_slots; + + dev_dbg(&dev->pdev->dev, MEI_HDR_FMT, MEI_HDR_PRM(header)); + + empty_slots = mei_hbuf_empty_slots(dev); + dev_dbg(&dev->pdev->dev, "empty slots = %hu.\n", empty_slots); + + dw_cnt = mei_data2slots(length); + if (empty_slots < 0 || dw_cnt > empty_slots) + return -EIO; + + mei_reg_write(hw, H_CB_WW, *((u32 *) header)); + + for (i = 0; i < length / 4; i++) + mei_reg_write(hw, H_CB_WW, reg_buf[i]); + + rem = length & 0x3; + if (rem > 0) { + u32 reg = 0; + memcpy(®, &buf[length - rem], rem); + mei_reg_write(hw, H_CB_WW, reg); + } + + hcsr = mei_hcsr_read(hw) | H_IG; + mei_hcsr_set(hw, hcsr); + if (!mei_me_hw_is_ready(dev)) + return -EIO; + + return 0; +} + +/** + * mei_me_count_full_read_slots - counts read full slots. + * + * @dev: the device structure + * + * returns -1(ESLOTS_OVERFLOW) if overflow, otherwise filled slots count + */ +static int mei_me_count_full_read_slots(struct mei_device *dev) +{ + struct mei_me_hw *hw = to_me_hw(dev); + char read_ptr, write_ptr; + unsigned char buffer_depth, filled_slots; + + hw->me_hw_state = mei_mecsr_read(hw); + buffer_depth = (unsigned char)((hw->me_hw_state & ME_CBD_HRA) >> 24); + read_ptr = (char) ((hw->me_hw_state & ME_CBRP_HRA) >> 8); + write_ptr = (char) ((hw->me_hw_state & ME_CBWP_HRA) >> 16); + filled_slots = (unsigned char) (write_ptr - read_ptr); + + /* check for overflow */ + if (filled_slots > buffer_depth) + return -EOVERFLOW; + + dev_dbg(&dev->pdev->dev, "filled_slots =%08x\n", filled_slots); + return (int)filled_slots; +} + +/** + * mei_me_read_slots - reads a message from mei device. + * + * @dev: the device structure + * @buffer: message buffer will be written + * @buffer_length: message size will be read + */ +static int mei_me_read_slots(struct mei_device *dev, unsigned char *buffer, + unsigned long buffer_length) +{ + struct mei_me_hw *hw = to_me_hw(dev); + u32 *reg_buf = (u32 *)buffer; + u32 hcsr; + + for (; buffer_length >= sizeof(u32); buffer_length -= sizeof(u32)) + *reg_buf++ = mei_me_mecbrw_read(dev); + + if (buffer_length > 0) { + u32 reg = mei_me_mecbrw_read(dev); + memcpy(reg_buf, ®, buffer_length); + } + + hcsr = mei_hcsr_read(hw) | H_IG; + mei_hcsr_set(hw, hcsr); + return 0; +} + +/** + * mei_me_irq_quick_handler - The ISR of the MEI device + * + * @irq: The irq number + * @dev_id: pointer to the device structure + * + * returns irqreturn_t + */ + +irqreturn_t mei_me_irq_quick_handler(int irq, void *dev_id) +{ + struct mei_device *dev = (struct mei_device *) dev_id; + struct mei_me_hw *hw = to_me_hw(dev); + u32 csr_reg = mei_hcsr_read(hw); + + if ((csr_reg & H_IS) != H_IS) + return IRQ_NONE; + + /* clear H_IS bit in H_CSR */ + mei_reg_write(hw, H_CSR, csr_reg); + + return IRQ_WAKE_THREAD; +} + +/** + * mei_me_irq_thread_handler - function called after ISR to handle the interrupt + * processing. + * + * @irq: The irq number + * @dev_id: pointer to the device structure + * + * returns irqreturn_t + * + */ +irqreturn_t mei_me_irq_thread_handler(int irq, void *dev_id) +{ + struct mei_device *dev = (struct mei_device *) dev_id; + struct mei_cl_cb complete_list; + struct mei_cl_cb *cb_pos = NULL, *cb_next = NULL; + struct mei_cl *cl; + s32 slots; + int rets; + bool bus_message_received; + + + dev_dbg(&dev->pdev->dev, "function called after ISR to handle the interrupt processing.\n"); + /* initialize our complete list */ + mutex_lock(&dev->device_lock); + mei_io_list_init(&complete_list); + + /* Ack the interrupt here + * In case of MSI we don't go through the quick handler */ + if (pci_dev_msi_enabled(dev->pdev)) + mei_clear_interrupts(dev); + + /* check if ME wants a reset */ + if (!mei_hw_is_ready(dev) && + dev->dev_state != MEI_DEV_RESETING && + dev->dev_state != MEI_DEV_INITIALIZING) { + dev_dbg(&dev->pdev->dev, "FW not ready.\n"); + mei_reset(dev, 1); + mutex_unlock(&dev->device_lock); + return IRQ_HANDLED; + } + + /* check if we need to start the dev */ + if (!mei_host_is_ready(dev)) { + if (mei_hw_is_ready(dev)) { + dev_dbg(&dev->pdev->dev, "we need to start the dev.\n"); + + mei_host_set_ready(dev); + + dev_dbg(&dev->pdev->dev, "link is established start sending messages.\n"); + /* link is established * start sending messages. */ + + dev->dev_state = MEI_DEV_INIT_CLIENTS; + + mei_hbm_start_req(dev); + mutex_unlock(&dev->device_lock); + return IRQ_HANDLED; + } else { + dev_dbg(&dev->pdev->dev, "FW not ready.\n"); + mutex_unlock(&dev->device_lock); + return IRQ_HANDLED; + } + } + /* check slots available for reading */ + slots = mei_count_full_read_slots(dev); + while (slots > 0) { + /* we have urgent data to send so break the read */ + if (dev->wr_ext_msg.hdr.length) + break; + dev_dbg(&dev->pdev->dev, "slots =%08x\n", slots); + dev_dbg(&dev->pdev->dev, "call mei_irq_read_handler.\n"); + rets = mei_irq_read_handler(dev, &complete_list, &slots); + if (rets) + goto end; + } + rets = mei_irq_write_handler(dev, &complete_list); +end: + dev_dbg(&dev->pdev->dev, "end of bottom half function.\n"); + dev->hbuf_is_ready = mei_hbuf_is_ready(dev); + + bus_message_received = false; + if (dev->recvd_msg && waitqueue_active(&dev->wait_recvd_msg)) { + dev_dbg(&dev->pdev->dev, "received waiting bus message\n"); + bus_message_received = true; + } + mutex_unlock(&dev->device_lock); + if (bus_message_received) { + dev_dbg(&dev->pdev->dev, "wake up dev->wait_recvd_msg\n"); + wake_up_interruptible(&dev->wait_recvd_msg); + bus_message_received = false; + } + if (list_empty(&complete_list.list)) + return IRQ_HANDLED; + + + list_for_each_entry_safe(cb_pos, cb_next, &complete_list.list, list) { + cl = cb_pos->cl; + list_del(&cb_pos->list); + if (cl) { + if (cl != &dev->iamthif_cl) { + dev_dbg(&dev->pdev->dev, "completing call back.\n"); + mei_irq_complete_handler(cl, cb_pos); + cb_pos = NULL; + } else if (cl == &dev->iamthif_cl) { + mei_amthif_complete(dev, cb_pos); + } + } + } + return IRQ_HANDLED; +} +static const struct mei_hw_ops mei_me_hw_ops = { + + .host_set_ready = mei_me_host_set_ready, + .host_is_ready = mei_me_host_is_ready, + + .hw_is_ready = mei_me_hw_is_ready, + .hw_reset = mei_me_hw_reset, + .hw_config = mei_me_hw_config, + + .intr_clear = mei_me_intr_clear, + .intr_enable = mei_me_intr_enable, + .intr_disable = mei_me_intr_disable, + + .hbuf_free_slots = mei_me_hbuf_empty_slots, + .hbuf_is_ready = mei_me_hbuf_is_empty, + .hbuf_max_len = mei_me_hbuf_max_len, + + .write = mei_me_write_message, + + .rdbuf_full_slots = mei_me_count_full_read_slots, + .read_hdr = mei_me_mecbrw_read, + .read = mei_me_read_slots +}; + +/** + * init_mei_device - allocates and initializes the mei device structure + * + * @pdev: The pci device structure + * + * returns The mei_device_device pointer on success, NULL on failure. + */ +struct mei_device *mei_me_dev_init(struct pci_dev *pdev) +{ + struct mei_device *dev; + + dev = kzalloc(sizeof(struct mei_device) + + sizeof(struct mei_me_hw), GFP_KERNEL); + if (!dev) + return NULL; + + mei_device_init(dev); + + INIT_LIST_HEAD(&dev->wd_cl.link); + INIT_LIST_HEAD(&dev->iamthif_cl.link); + mei_io_list_init(&dev->amthif_cmd_list); + mei_io_list_init(&dev->amthif_rd_complete_list); + + INIT_DELAYED_WORK(&dev->timer_work, mei_timer); + INIT_WORK(&dev->init_work, mei_host_client_init); + + dev->ops = &mei_me_hw_ops; + + dev->pdev = pdev; + return dev; +} + diff --git a/drivers/misc/mei/hw-me.h b/drivers/misc/mei/hw-me.h new file mode 100644 index 000000000000..8518d3eeb838 --- /dev/null +++ b/drivers/misc/mei/hw-me.h @@ -0,0 +1,48 @@ +/* + * + * Intel Management Engine Interface (Intel MEI) Linux driver + * Copyright (c) 2003-2012, Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + */ + + + +#ifndef _MEI_INTERFACE_H_ +#define _MEI_INTERFACE_H_ + +#include <linux/mei.h> +#include "mei_dev.h" +#include "client.h" + +struct mei_me_hw { + void __iomem *mem_addr; + /* + * hw states of host and fw(ME) + */ + u32 host_hw_state; + u32 me_hw_state; +}; + +#define to_me_hw(dev) (struct mei_me_hw *)((dev)->hw) + +struct mei_device *mei_me_dev_init(struct pci_dev *pdev); + +/* get slots (dwords) from a message length + header (bytes) */ +static inline unsigned char mei_data2slots(size_t length) +{ + return DIV_ROUND_UP(sizeof(struct mei_msg_hdr) + length, 4); +} + +irqreturn_t mei_me_irq_quick_handler(int irq, void *dev_id); +irqreturn_t mei_me_irq_thread_handler(int irq, void *dev_id); + +#endif /* _MEI_INTERFACE_H_ */ diff --git a/drivers/misc/mei/hw.h b/drivers/misc/mei/hw.h index be8ca6b333ca..cb2f556b4252 100644 --- a/drivers/misc/mei/hw.h +++ b/drivers/misc/mei/hw.h @@ -31,109 +31,6 @@ #define MEI_IAMTHIF_STALL_TIMER 12 /* HPS */ #define MEI_IAMTHIF_READ_TIMER 10 /* HPS */ -/* - * Internal Clients Number - */ -#define MEI_WD_HOST_CLIENT_ID 1 -#define MEI_IAMTHIF_HOST_CLIENT_ID 2 - -/* - * MEI device IDs - */ -#define MEI_DEV_ID_82946GZ 0x2974 /* 82946GZ/GL */ -#define MEI_DEV_ID_82G35 0x2984 /* 82G35 Express */ -#define MEI_DEV_ID_82Q965 0x2994 /* 82Q963/Q965 */ -#define MEI_DEV_ID_82G965 0x29A4 /* 82P965/G965 */ - -#define MEI_DEV_ID_82GM965 0x2A04 /* Mobile PM965/GM965 */ -#define MEI_DEV_ID_82GME965 0x2A14 /* Mobile GME965/GLE960 */ - -#define MEI_DEV_ID_ICH9_82Q35 0x29B4 /* 82Q35 Express */ -#define MEI_DEV_ID_ICH9_82G33 0x29C4 /* 82G33/G31/P35/P31 Express */ -#define MEI_DEV_ID_ICH9_82Q33 0x29D4 /* 82Q33 Express */ -#define MEI_DEV_ID_ICH9_82X38 0x29E4 /* 82X38/X48 Express */ -#define MEI_DEV_ID_ICH9_3200 0x29F4 /* 3200/3210 Server */ - -#define MEI_DEV_ID_ICH9_6 0x28B4 /* Bearlake */ -#define MEI_DEV_ID_ICH9_7 0x28C4 /* Bearlake */ -#define MEI_DEV_ID_ICH9_8 0x28D4 /* Bearlake */ -#define MEI_DEV_ID_ICH9_9 0x28E4 /* Bearlake */ -#define MEI_DEV_ID_ICH9_10 0x28F4 /* Bearlake */ - -#define MEI_DEV_ID_ICH9M_1 0x2A44 /* Cantiga */ -#define MEI_DEV_ID_ICH9M_2 0x2A54 /* Cantiga */ -#define MEI_DEV_ID_ICH9M_3 0x2A64 /* Cantiga */ -#define MEI_DEV_ID_ICH9M_4 0x2A74 /* Cantiga */ - -#define MEI_DEV_ID_ICH10_1 0x2E04 /* Eaglelake */ -#define MEI_DEV_ID_ICH10_2 0x2E14 /* Eaglelake */ -#define MEI_DEV_ID_ICH10_3 0x2E24 /* Eaglelake */ -#define MEI_DEV_ID_ICH10_4 0x2E34 /* Eaglelake */ - -#define MEI_DEV_ID_IBXPK_1 0x3B64 /* Calpella */ -#define MEI_DEV_ID_IBXPK_2 0x3B65 /* Calpella */ - -#define MEI_DEV_ID_CPT_1 0x1C3A /* Couger Point */ -#define MEI_DEV_ID_PBG_1 0x1D3A /* C600/X79 Patsburg */ - -#define MEI_DEV_ID_PPT_1 0x1E3A /* Panther Point */ -#define MEI_DEV_ID_PPT_2 0x1CBA /* Panther Point */ -#define MEI_DEV_ID_PPT_3 0x1DBA /* Panther Point */ - -#define MEI_DEV_ID_LPT 0x8C3A /* Lynx Point */ -#define MEI_DEV_ID_LPT_LP 0x9C3A /* Lynx Point LP */ -/* - * MEI HW Section - */ - -/* MEI registers */ -/* H_CB_WW - Host Circular Buffer (CB) Write Window register */ -#define H_CB_WW 0 -/* H_CSR - Host Control Status register */ -#define H_CSR 4 -/* ME_CB_RW - ME Circular Buffer Read Window register (read only) */ -#define ME_CB_RW 8 -/* ME_CSR_HA - ME Control Status Host Access register (read only) */ -#define ME_CSR_HA 0xC - - -/* register bits of H_CSR (Host Control Status register) */ -/* Host Circular Buffer Depth - maximum number of 32-bit entries in CB */ -#define H_CBD 0xFF000000 -/* Host Circular Buffer Write Pointer */ -#define H_CBWP 0x00FF0000 -/* Host Circular Buffer Read Pointer */ -#define H_CBRP 0x0000FF00 -/* Host Reset */ -#define H_RST 0x00000010 -/* Host Ready */ -#define H_RDY 0x00000008 -/* Host Interrupt Generate */ -#define H_IG 0x00000004 -/* Host Interrupt Status */ -#define H_IS 0x00000002 -/* Host Interrupt Enable */ -#define H_IE 0x00000001 - - -/* register bits of ME_CSR_HA (ME Control Status Host Access register) */ -/* ME CB (Circular Buffer) Depth HRA (Host Read Access) - host read only -access to ME_CBD */ -#define ME_CBD_HRA 0xFF000000 -/* ME CB Write Pointer HRA - host read only access to ME_CBWP */ -#define ME_CBWP_HRA 0x00FF0000 -/* ME CB Read Pointer HRA - host read only access to ME_CBRP */ -#define ME_CBRP_HRA 0x0000FF00 -/* ME Reset HRA - host read only access to ME_RST */ -#define ME_RST_HRA 0x00000010 -/* ME Ready HRA - host read only access to ME_RDY */ -#define ME_RDY_HRA 0x00000008 -/* ME Interrupt Generate HRA - host read only access to ME_IG */ -#define ME_IG_HRA 0x00000004 -/* ME Interrupt Status HRA - host read only access to ME_IS */ -#define ME_IS_HRA 0x00000002 -/* ME Interrupt Enable HRA - host read only access to ME_IE */ -#define ME_IE_HRA 0x00000001 /* * MEI Version @@ -224,6 +121,22 @@ struct mei_bus_message { u8 data[0]; } __packed; +/** + * struct hbm_cl_cmd - client specific host bus command + * CONNECT, DISCONNECT, and FlOW CONTROL + * + * @hbm_cmd - bus message command header + * @me_addr - address of the client in ME + * @host_addr - address of the client in the driver + * @data + */ +struct mei_hbm_cl_cmd { + u8 hbm_cmd; + u8 me_addr; + u8 host_addr; + u8 data; +}; + struct hbm_version { u8 minor_version; u8 major_version; @@ -333,11 +246,5 @@ struct hbm_flow_control { u8 reserved[MEI_FC_MESSAGE_RESERVED_LENGTH]; } __packed; -struct mei_me_client { - struct mei_client_properties props; - u8 client_id; - u8 mei_flow_ctrl_creds; -} __packed; - #endif diff --git a/drivers/misc/mei/init.c b/drivers/misc/mei/init.c index a54cd5567ca2..6ec530168afb 100644 --- a/drivers/misc/mei/init.c +++ b/drivers/misc/mei/init.c @@ -19,11 +19,11 @@ #include <linux/wait.h> #include <linux/delay.h> -#include "mei_dev.h" -#include "hw.h" -#include "interface.h" #include <linux/mei.h> +#include "mei_dev.h" +#include "client.h" + const char *mei_dev_state_str(int state) { #define MEI_DEV_STATE(state) case MEI_DEV_##state: return #state @@ -42,84 +42,20 @@ const char *mei_dev_state_str(int state) #undef MEI_DEV_STATE } - - -/** - * mei_io_list_flush - removes list entry belonging to cl. - * - * @list: An instance of our list structure - * @cl: private data of the file object - */ -void mei_io_list_flush(struct mei_cl_cb *list, struct mei_cl *cl) -{ - struct mei_cl_cb *pos; - struct mei_cl_cb *next; - - list_for_each_entry_safe(pos, next, &list->list, list) { - if (pos->cl) { - if (mei_cl_cmp_id(cl, pos->cl)) - list_del(&pos->list); - } - } -} -/** - * mei_cl_flush_queues - flushes queue lists belonging to cl. - * - * @dev: the device structure - * @cl: private data of the file object - */ -int mei_cl_flush_queues(struct mei_cl *cl) +void mei_device_init(struct mei_device *dev) { - if (!cl || !cl->dev) - return -EINVAL; - - dev_dbg(&cl->dev->pdev->dev, "remove list entry belonging to cl\n"); - mei_io_list_flush(&cl->dev->read_list, cl); - mei_io_list_flush(&cl->dev->write_list, cl); - mei_io_list_flush(&cl->dev->write_waiting_list, cl); - mei_io_list_flush(&cl->dev->ctrl_wr_list, cl); - mei_io_list_flush(&cl->dev->ctrl_rd_list, cl); - mei_io_list_flush(&cl->dev->amthif_cmd_list, cl); - mei_io_list_flush(&cl->dev->amthif_rd_complete_list, cl); - return 0; -} - - - -/** - * init_mei_device - allocates and initializes the mei device structure - * - * @pdev: The pci device structure - * - * returns The mei_device_device pointer on success, NULL on failure. - */ -struct mei_device *mei_device_init(struct pci_dev *pdev) -{ - struct mei_device *dev; - - dev = kzalloc(sizeof(struct mei_device), GFP_KERNEL); - if (!dev) - return NULL; - /* setup our list array */ INIT_LIST_HEAD(&dev->file_list); - INIT_LIST_HEAD(&dev->wd_cl.link); - INIT_LIST_HEAD(&dev->iamthif_cl.link); mutex_init(&dev->device_lock); init_waitqueue_head(&dev->wait_recvd_msg); init_waitqueue_head(&dev->wait_stop_wd); dev->dev_state = MEI_DEV_INITIALIZING; - dev->iamthif_state = MEI_IAMTHIF_IDLE; mei_io_list_init(&dev->read_list); mei_io_list_init(&dev->write_list); mei_io_list_init(&dev->write_waiting_list); mei_io_list_init(&dev->ctrl_wr_list); mei_io_list_init(&dev->ctrl_rd_list); - mei_io_list_init(&dev->amthif_cmd_list); - mei_io_list_init(&dev->amthif_rd_complete_list); - dev->pdev = pdev; - return dev; } /** @@ -131,101 +67,64 @@ struct mei_device *mei_device_init(struct pci_dev *pdev) */ int mei_hw_init(struct mei_device *dev) { - int err = 0; - int ret; + int ret = 0; mutex_lock(&dev->device_lock); - dev->host_hw_state = mei_hcsr_read(dev); - dev->me_hw_state = mei_mecsr_read(dev); - dev_dbg(&dev->pdev->dev, "host_hw_state = 0x%08x, mestate = 0x%08x.\n", - dev->host_hw_state, dev->me_hw_state); - /* acknowledge interrupt and stop interupts */ - if ((dev->host_hw_state & H_IS) == H_IS) - mei_reg_write(dev, H_CSR, dev->host_hw_state); + mei_clear_interrupts(dev); - /* Doesn't change in runtime */ - dev->hbuf_depth = (dev->host_hw_state & H_CBD) >> 24; + mei_hw_config(dev); dev->recvd_msg = false; dev_dbg(&dev->pdev->dev, "reset in start the mei device.\n"); mei_reset(dev, 1); - dev_dbg(&dev->pdev->dev, "host_hw_state = 0x%08x, me_hw_state = 0x%08x.\n", - dev->host_hw_state, dev->me_hw_state); - /* wait for ME to turn on ME_RDY */ if (!dev->recvd_msg) { mutex_unlock(&dev->device_lock); - err = wait_event_interruptible_timeout(dev->wait_recvd_msg, + ret = wait_event_interruptible_timeout(dev->wait_recvd_msg, dev->recvd_msg, mei_secs_to_jiffies(MEI_INTEROP_TIMEOUT)); mutex_lock(&dev->device_lock); } - if (err <= 0 && !dev->recvd_msg) { + if (ret <= 0 && !dev->recvd_msg) { dev->dev_state = MEI_DEV_DISABLED; dev_dbg(&dev->pdev->dev, "wait_event_interruptible_timeout failed" "on wait for ME to turn on ME_RDY.\n"); - ret = -ENODEV; - goto out; + goto err; } - if (!(((dev->host_hw_state & H_RDY) == H_RDY) && - ((dev->me_hw_state & ME_RDY_HRA) == ME_RDY_HRA))) { - dev->dev_state = MEI_DEV_DISABLED; - dev_dbg(&dev->pdev->dev, - "host_hw_state = 0x%08x, me_hw_state = 0x%08x.\n", - dev->host_hw_state, dev->me_hw_state); - - if (!(dev->host_hw_state & H_RDY)) - dev_dbg(&dev->pdev->dev, "host turn off H_RDY.\n"); - if (!(dev->me_hw_state & ME_RDY_HRA)) - dev_dbg(&dev->pdev->dev, "ME turn off ME_RDY.\n"); + if (!mei_host_is_ready(dev)) { + dev_err(&dev->pdev->dev, "host is not ready.\n"); + goto err; + } - dev_err(&dev->pdev->dev, "link layer initialization failed.\n"); - ret = -ENODEV; - goto out; + if (!mei_hw_is_ready(dev)) { + dev_err(&dev->pdev->dev, "ME is not ready.\n"); + goto err; } if (dev->version.major_version != HBM_MAJOR_VERSION || dev->version.minor_version != HBM_MINOR_VERSION) { dev_dbg(&dev->pdev->dev, "MEI start failed.\n"); - ret = -ENODEV; - goto out; + goto err; } dev->recvd_msg = false; - dev_dbg(&dev->pdev->dev, "host_hw_state = 0x%08x, me_hw_state = 0x%08x.\n", - dev->host_hw_state, dev->me_hw_state); - dev_dbg(&dev->pdev->dev, "ME turn on ME_RDY and host turn on H_RDY.\n"); dev_dbg(&dev->pdev->dev, "link layer has been established.\n"); - dev_dbg(&dev->pdev->dev, "MEI start success.\n"); - ret = 0; -out: mutex_unlock(&dev->device_lock); - return ret; -} - -/** - * mei_hw_reset - resets fw via mei csr register. - * - * @dev: the device structure - * @interrupts_enabled: if interrupt should be enabled after reset. - */ -static void mei_hw_reset(struct mei_device *dev, int interrupts_enabled) -{ - dev->host_hw_state |= (H_RST | H_IG); - - if (interrupts_enabled) - mei_enable_interrupts(dev); - else - mei_disable_interrupts(dev); + return 0; +err: + dev_err(&dev->pdev->dev, "link layer initialization failed.\n"); + dev->dev_state = MEI_DEV_DISABLED; + mutex_unlock(&dev->device_lock); + return -ENODEV; } /** @@ -236,56 +135,34 @@ static void mei_hw_reset(struct mei_device *dev, int interrupts_enabled) */ void mei_reset(struct mei_device *dev, int interrupts_enabled) { - struct mei_cl *cl_pos = NULL; - struct mei_cl *cl_next = NULL; - struct mei_cl_cb *cb_pos = NULL; - struct mei_cl_cb *cb_next = NULL; bool unexpected; - if (dev->dev_state == MEI_DEV_RECOVERING_FROM_RESET) { - dev->need_reset = true; + if (dev->dev_state == MEI_DEV_RECOVERING_FROM_RESET) return; - } unexpected = (dev->dev_state != MEI_DEV_INITIALIZING && dev->dev_state != MEI_DEV_DISABLED && dev->dev_state != MEI_DEV_POWER_DOWN && dev->dev_state != MEI_DEV_POWER_UP); - dev->host_hw_state = mei_hcsr_read(dev); - - dev_dbg(&dev->pdev->dev, "before reset host_hw_state = 0x%08x.\n", - dev->host_hw_state); - mei_hw_reset(dev, interrupts_enabled); - dev->host_hw_state &= ~H_RST; - dev->host_hw_state |= H_IG; - - mei_hcsr_set(dev); - - dev_dbg(&dev->pdev->dev, "currently saved host_hw_state = 0x%08x.\n", - dev->host_hw_state); - - dev->need_reset = false; if (dev->dev_state != MEI_DEV_INITIALIZING) { if (dev->dev_state != MEI_DEV_DISABLED && dev->dev_state != MEI_DEV_POWER_DOWN) dev->dev_state = MEI_DEV_RESETING; - list_for_each_entry_safe(cl_pos, - cl_next, &dev->file_list, link) { - cl_pos->state = MEI_FILE_DISCONNECTED; - cl_pos->mei_flow_ctrl_creds = 0; - cl_pos->read_cb = NULL; - cl_pos->timer_count = 0; - } + mei_cl_all_disconnect(dev); + /* remove entry if already in list */ dev_dbg(&dev->pdev->dev, "remove iamthif and wd from the file list.\n"); - mei_me_cl_unlink(dev, &dev->wd_cl); - - mei_me_cl_unlink(dev, &dev->iamthif_cl); + mei_cl_unlink(&dev->wd_cl); + if (dev->open_handle_count > 0) + dev->open_handle_count--; + mei_cl_unlink(&dev->iamthif_cl); + if (dev->open_handle_count > 0) + dev->open_handle_count--; mei_amthif_reset_params(dev); memset(&dev->wr_ext_msg, 0, sizeof(dev->wr_ext_msg)); @@ -295,392 +172,17 @@ void mei_reset(struct mei_device *dev, int interrupts_enabled) dev->rd_msg_hdr = 0; dev->wd_pending = false; - /* update the state of the registers after reset */ - dev->host_hw_state = mei_hcsr_read(dev); - dev->me_hw_state = mei_mecsr_read(dev); - - dev_dbg(&dev->pdev->dev, "after reset host_hw_state = 0x%08x, me_hw_state = 0x%08x.\n", - dev->host_hw_state, dev->me_hw_state); - if (unexpected) dev_warn(&dev->pdev->dev, "unexpected reset: dev_state = %s\n", mei_dev_state_str(dev->dev_state)); - /* Wake up all readings so they can be interrupted */ - list_for_each_entry_safe(cl_pos, cl_next, &dev->file_list, link) { - if (waitqueue_active(&cl_pos->rx_wait)) { - dev_dbg(&dev->pdev->dev, "Waking up client!\n"); - wake_up_interruptible(&cl_pos->rx_wait); - } - } - /* remove all waiting requests */ - list_for_each_entry_safe(cb_pos, cb_next, &dev->write_list.list, list) { - list_del(&cb_pos->list); - mei_io_cb_free(cb_pos); - } -} - - - -/** - * host_start_message - mei host sends start message. - * - * @dev: the device structure - * - * returns none. - */ -void mei_host_start_message(struct mei_device *dev) -{ - struct mei_msg_hdr *mei_hdr; - struct hbm_host_version_request *start_req; - const size_t len = sizeof(struct hbm_host_version_request); - - mei_hdr = mei_hbm_hdr(&dev->wr_msg_buf[0], len); - - /* host start message */ - start_req = (struct hbm_host_version_request *)&dev->wr_msg_buf[1]; - memset(start_req, 0, len); - start_req->hbm_cmd = HOST_START_REQ_CMD; - start_req->host_version.major_version = HBM_MAJOR_VERSION; - start_req->host_version.minor_version = HBM_MINOR_VERSION; - - dev->recvd_msg = false; - if (mei_write_message(dev, mei_hdr, (unsigned char *)start_req, len)) { - dev_dbg(&dev->pdev->dev, "write send version message to FW fail.\n"); - dev->dev_state = MEI_DEV_RESETING; - mei_reset(dev, 1); - } - dev->init_clients_state = MEI_START_MESSAGE; - dev->init_clients_timer = MEI_CLIENTS_INIT_TIMEOUT; - return ; -} - -/** - * host_enum_clients_message - host sends enumeration client request message. - * - * @dev: the device structure - * - * returns none. - */ -void mei_host_enum_clients_message(struct mei_device *dev) -{ - struct mei_msg_hdr *mei_hdr; - struct hbm_host_enum_request *enum_req; - const size_t len = sizeof(struct hbm_host_enum_request); - /* enumerate clients */ - mei_hdr = mei_hbm_hdr(&dev->wr_msg_buf[0], len); - - enum_req = (struct hbm_host_enum_request *) &dev->wr_msg_buf[1]; - memset(enum_req, 0, sizeof(struct hbm_host_enum_request)); - enum_req->hbm_cmd = HOST_ENUM_REQ_CMD; - - if (mei_write_message(dev, mei_hdr, (unsigned char *)enum_req, len)) { - dev->dev_state = MEI_DEV_RESETING; - dev_dbg(&dev->pdev->dev, "write send enumeration request message to FW fail.\n"); - mei_reset(dev, 1); - } - dev->init_clients_state = MEI_ENUM_CLIENTS_MESSAGE; - dev->init_clients_timer = MEI_CLIENTS_INIT_TIMEOUT; - return; -} - - -/** - * allocate_me_clients_storage - allocates storage for me clients - * - * @dev: the device structure - * - * returns none. - */ -void mei_allocate_me_clients_storage(struct mei_device *dev) -{ - struct mei_me_client *clients; - int b; - - /* count how many ME clients we have */ - for_each_set_bit(b, dev->me_clients_map, MEI_CLIENTS_MAX) - dev->me_clients_num++; - - if (dev->me_clients_num <= 0) - return ; - - - if (dev->me_clients != NULL) { - kfree(dev->me_clients); - dev->me_clients = NULL; - } - dev_dbg(&dev->pdev->dev, "memory allocation for ME clients size=%zd.\n", - dev->me_clients_num * sizeof(struct mei_me_client)); - /* allocate storage for ME clients representation */ - clients = kcalloc(dev->me_clients_num, - sizeof(struct mei_me_client), GFP_KERNEL); - if (!clients) { - dev_dbg(&dev->pdev->dev, "memory allocation for ME clients failed.\n"); - dev->dev_state = MEI_DEV_RESETING; - mei_reset(dev, 1); - return ; - } - dev->me_clients = clients; - return ; -} - -void mei_host_client_init(struct work_struct *work) -{ - struct mei_device *dev = container_of(work, - struct mei_device, init_work); - struct mei_client_properties *client_props; - int i; - - mutex_lock(&dev->device_lock); - - bitmap_zero(dev->host_clients_map, MEI_CLIENTS_MAX); - dev->open_handle_count = 0; - - /* - * Reserving the first three client IDs - * 0: Reserved for MEI Bus Message communications - * 1: Reserved for Watchdog - * 2: Reserved for AMTHI - */ - bitmap_set(dev->host_clients_map, 0, 3); - - for (i = 0; i < dev->me_clients_num; i++) { - client_props = &dev->me_clients[i].props; - - if (!uuid_le_cmp(client_props->protocol_name, mei_amthi_guid)) - mei_amthif_host_init(dev); - else if (!uuid_le_cmp(client_props->protocol_name, mei_wd_guid)) - mei_wd_host_init(dev); - } - - dev->dev_state = MEI_DEV_ENABLED; - - mutex_unlock(&dev->device_lock); -} - -int mei_host_client_enumerate(struct mei_device *dev) -{ - - struct mei_msg_hdr *mei_hdr; - struct hbm_props_request *prop_req; - const size_t len = sizeof(struct hbm_props_request); - unsigned long next_client_index; - u8 client_num; - - - client_num = dev->me_client_presentation_num; - - next_client_index = find_next_bit(dev->me_clients_map, MEI_CLIENTS_MAX, - dev->me_client_index); - - /* We got all client properties */ - if (next_client_index == MEI_CLIENTS_MAX) { - schedule_work(&dev->init_work); - - return 0; - } - - dev->me_clients[client_num].client_id = next_client_index; - dev->me_clients[client_num].mei_flow_ctrl_creds = 0; - - mei_hdr = mei_hbm_hdr(&dev->wr_msg_buf[0], len); - prop_req = (struct hbm_props_request *)&dev->wr_msg_buf[1]; - - memset(prop_req, 0, sizeof(struct hbm_props_request)); - - - prop_req->hbm_cmd = HOST_CLIENT_PROPERTIES_REQ_CMD; - prop_req->address = next_client_index; - - if (mei_write_message(dev, mei_hdr, (unsigned char *) prop_req, - mei_hdr->length)) { - dev->dev_state = MEI_DEV_RESETING; - dev_err(&dev->pdev->dev, "Properties request command failed\n"); - mei_reset(dev, 1); - - return -EIO; - } - - dev->init_clients_timer = MEI_CLIENTS_INIT_TIMEOUT; - dev->me_client_index = next_client_index; - - return 0; -} - -/** - * mei_init_file_private - initializes private file structure. - * - * @priv: private file structure to be initialized - * @file: the file structure - */ -void mei_cl_init(struct mei_cl *priv, struct mei_device *dev) -{ - memset(priv, 0, sizeof(struct mei_cl)); - init_waitqueue_head(&priv->wait); - init_waitqueue_head(&priv->rx_wait); - init_waitqueue_head(&priv->tx_wait); - INIT_LIST_HEAD(&priv->link); - priv->reading_state = MEI_IDLE; - priv->writing_state = MEI_IDLE; - priv->dev = dev; -} - -int mei_me_cl_by_uuid(const struct mei_device *dev, const uuid_le *cuuid) -{ - int i, res = -ENOENT; - - for (i = 0; i < dev->me_clients_num; ++i) - if (uuid_le_cmp(*cuuid, - dev->me_clients[i].props.protocol_name) == 0) { - res = i; - break; - } - - return res; -} - - -/** - * mei_me_cl_link - create link between host and me clinet and add - * me_cl to the list - * - * @dev: the device structure - * @cl: link between me and host client assocated with opened file descriptor - * @cuuid: uuid of ME client - * @client_id: id of the host client - * - * returns ME client index if ME client - * -EINVAL on incorrect values - * -ENONET if client not found - */ -int mei_me_cl_link(struct mei_device *dev, struct mei_cl *cl, - const uuid_le *cuuid, u8 host_cl_id) -{ - int i; - - if (!dev || !cl || !cuuid) - return -EINVAL; - - /* check for valid client id */ - i = mei_me_cl_by_uuid(dev, cuuid); - if (i >= 0) { - cl->me_client_id = dev->me_clients[i].client_id; - cl->state = MEI_FILE_CONNECTING; - cl->host_client_id = host_cl_id; - - list_add_tail(&cl->link, &dev->file_list); - return (u8)i; - } - - return -ENOENT; -} -/** - * mei_me_cl_unlink - remove me_cl from the list - * - * @dev: the device structure - * @host_client_id: host client id to be removed - */ -void mei_me_cl_unlink(struct mei_device *dev, struct mei_cl *cl) -{ - struct mei_cl *pos, *next; - list_for_each_entry_safe(pos, next, &dev->file_list, link) { - if (cl->host_client_id == pos->host_client_id) { - dev_dbg(&dev->pdev->dev, "remove host client = %d, ME client = %d\n", - pos->host_client_id, pos->me_client_id); - list_del_init(&pos->link); - break; - } - } -} + /* wake up all readings so they can be interrupted */ + mei_cl_all_read_wakeup(dev); -/** - * mei_alloc_file_private - allocates a private file structure and sets it up. - * @file: the file structure - * - * returns The allocated file or NULL on failure - */ -struct mei_cl *mei_cl_allocate(struct mei_device *dev) -{ - struct mei_cl *cl; - - cl = kmalloc(sizeof(struct mei_cl), GFP_KERNEL); - if (!cl) - return NULL; - - mei_cl_init(cl, dev); - - return cl; + /* remove all waiting requests */ + mei_cl_all_write_clear(dev); } -/** - * mei_disconnect_host_client - sends disconnect message to fw from host client. - * - * @dev: the device structure - * @cl: private data of the file object - * - * Locking: called under "dev->device_lock" lock - * - * returns 0 on success, <0 on failure. - */ -int mei_disconnect_host_client(struct mei_device *dev, struct mei_cl *cl) -{ - struct mei_cl_cb *cb; - int rets, err; - - if (!dev || !cl) - return -ENODEV; - - if (cl->state != MEI_FILE_DISCONNECTING) - return 0; - - cb = mei_io_cb_init(cl, NULL); - if (!cb) - return -ENOMEM; - - cb->fop_type = MEI_FOP_CLOSE; - if (dev->mei_host_buffer_is_empty) { - dev->mei_host_buffer_is_empty = false; - if (mei_disconnect(dev, cl)) { - rets = -ENODEV; - dev_dbg(&dev->pdev->dev, "failed to call mei_disconnect.\n"); - goto free; - } - mdelay(10); /* Wait for hardware disconnection ready */ - list_add_tail(&cb->list, &dev->ctrl_rd_list.list); - } else { - dev_dbg(&dev->pdev->dev, "add disconnect cb to control write list\n"); - list_add_tail(&cb->list, &dev->ctrl_wr_list.list); - - } - mutex_unlock(&dev->device_lock); - - err = wait_event_timeout(dev->wait_recvd_msg, - MEI_FILE_DISCONNECTED == cl->state, - mei_secs_to_jiffies(MEI_CL_CONNECT_TIMEOUT)); - - mutex_lock(&dev->device_lock); - if (MEI_FILE_DISCONNECTED == cl->state) { - rets = 0; - dev_dbg(&dev->pdev->dev, "successfully disconnected from FW client.\n"); - } else { - rets = -ENODEV; - if (MEI_FILE_DISCONNECTED != cl->state) - dev_dbg(&dev->pdev->dev, "wrong status client disconnect.\n"); - - if (err) - dev_dbg(&dev->pdev->dev, - "wait failed disconnect err=%08x\n", - err); - - dev_dbg(&dev->pdev->dev, "failed to disconnect from FW client.\n"); - } - - mei_io_list_flush(&dev->ctrl_rd_list, cl); - mei_io_list_flush(&dev->ctrl_wr_list, cl); -free: - mei_io_cb_free(cb); - return rets; -} diff --git a/drivers/misc/mei/interface.c b/drivers/misc/mei/interface.c deleted file mode 100644 index 8de854785960..000000000000 --- a/drivers/misc/mei/interface.c +++ /dev/null @@ -1,388 +0,0 @@ -/* - * - * Intel Management Engine Interface (Intel MEI) Linux driver - * Copyright (c) 2003-2012, Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - */ - -#include <linux/pci.h> -#include "mei_dev.h" -#include <linux/mei.h> -#include "interface.h" - - - -/** - * mei_set_csr_register - writes H_CSR register to the mei device, - * and ignores the H_IS bit for it is write-one-to-zero. - * - * @dev: the device structure - */ -void mei_hcsr_set(struct mei_device *dev) -{ - if ((dev->host_hw_state & H_IS) == H_IS) - dev->host_hw_state &= ~H_IS; - mei_reg_write(dev, H_CSR, dev->host_hw_state); - dev->host_hw_state = mei_hcsr_read(dev); -} - -/** - * mei_csr_enable_interrupts - enables mei device interrupts - * - * @dev: the device structure - */ -void mei_enable_interrupts(struct mei_device *dev) -{ - dev->host_hw_state |= H_IE; - mei_hcsr_set(dev); -} - -/** - * mei_csr_disable_interrupts - disables mei device interrupts - * - * @dev: the device structure - */ -void mei_disable_interrupts(struct mei_device *dev) -{ - dev->host_hw_state &= ~H_IE; - mei_hcsr_set(dev); -} - -/** - * mei_hbuf_filled_slots - gets number of device filled buffer slots - * - * @device: the device structure - * - * returns number of filled slots - */ -static unsigned char mei_hbuf_filled_slots(struct mei_device *dev) -{ - char read_ptr, write_ptr; - - dev->host_hw_state = mei_hcsr_read(dev); - - read_ptr = (char) ((dev->host_hw_state & H_CBRP) >> 8); - write_ptr = (char) ((dev->host_hw_state & H_CBWP) >> 16); - - return (unsigned char) (write_ptr - read_ptr); -} - -/** - * mei_hbuf_is_empty - checks if host buffer is empty. - * - * @dev: the device structure - * - * returns true if empty, false - otherwise. - */ -bool mei_hbuf_is_empty(struct mei_device *dev) -{ - return mei_hbuf_filled_slots(dev) == 0; -} - -/** - * mei_hbuf_empty_slots - counts write empty slots. - * - * @dev: the device structure - * - * returns -1(ESLOTS_OVERFLOW) if overflow, otherwise empty slots count - */ -int mei_hbuf_empty_slots(struct mei_device *dev) -{ - unsigned char filled_slots, empty_slots; - - filled_slots = mei_hbuf_filled_slots(dev); - empty_slots = dev->hbuf_depth - filled_slots; - - /* check for overflow */ - if (filled_slots > dev->hbuf_depth) - return -EOVERFLOW; - - return empty_slots; -} - -/** - * mei_write_message - writes a message to mei device. - * - * @dev: the device structure - * @header: header of message - * @write_buffer: message buffer will be written - * @write_length: message size will be written - * - * This function returns -EIO if write has failed - */ -int mei_write_message(struct mei_device *dev, struct mei_msg_hdr *header, - unsigned char *buf, unsigned long length) -{ - unsigned long rem, dw_cnt; - u32 *reg_buf = (u32 *)buf; - int i; - int empty_slots; - - - dev_dbg(&dev->pdev->dev, - "mei_write_message header=%08x.\n", - *((u32 *) header)); - - empty_slots = mei_hbuf_empty_slots(dev); - dev_dbg(&dev->pdev->dev, "empty slots = %hu.\n", empty_slots); - - dw_cnt = mei_data2slots(length); - if (empty_slots < 0 || dw_cnt > empty_slots) - return -EIO; - - mei_reg_write(dev, H_CB_WW, *((u32 *) header)); - - for (i = 0; i < length / 4; i++) - mei_reg_write(dev, H_CB_WW, reg_buf[i]); - - rem = length & 0x3; - if (rem > 0) { - u32 reg = 0; - memcpy(®, &buf[length - rem], rem); - mei_reg_write(dev, H_CB_WW, reg); - } - - dev->host_hw_state = mei_hcsr_read(dev); - dev->host_hw_state |= H_IG; - mei_hcsr_set(dev); - dev->me_hw_state = mei_mecsr_read(dev); - if ((dev->me_hw_state & ME_RDY_HRA) != ME_RDY_HRA) - return -EIO; - - return 0; -} - -/** - * mei_count_full_read_slots - counts read full slots. - * - * @dev: the device structure - * - * returns -1(ESLOTS_OVERFLOW) if overflow, otherwise filled slots count - */ -int mei_count_full_read_slots(struct mei_device *dev) -{ - char read_ptr, write_ptr; - unsigned char buffer_depth, filled_slots; - - dev->me_hw_state = mei_mecsr_read(dev); - buffer_depth = (unsigned char)((dev->me_hw_state & ME_CBD_HRA) >> 24); - read_ptr = (char) ((dev->me_hw_state & ME_CBRP_HRA) >> 8); - write_ptr = (char) ((dev->me_hw_state & ME_CBWP_HRA) >> 16); - filled_slots = (unsigned char) (write_ptr - read_ptr); - - /* check for overflow */ - if (filled_slots > buffer_depth) - return -EOVERFLOW; - - dev_dbg(&dev->pdev->dev, "filled_slots =%08x\n", filled_slots); - return (int)filled_slots; -} - -/** - * mei_read_slots - reads a message from mei device. - * - * @dev: the device structure - * @buffer: message buffer will be written - * @buffer_length: message size will be read - */ -void mei_read_slots(struct mei_device *dev, unsigned char *buffer, - unsigned long buffer_length) -{ - u32 *reg_buf = (u32 *)buffer; - - for (; buffer_length >= sizeof(u32); buffer_length -= sizeof(u32)) - *reg_buf++ = mei_mecbrw_read(dev); - - if (buffer_length > 0) { - u32 reg = mei_mecbrw_read(dev); - memcpy(reg_buf, ®, buffer_length); - } - - dev->host_hw_state |= H_IG; - mei_hcsr_set(dev); -} - -/** - * mei_flow_ctrl_creds - checks flow_control credentials. - * - * @dev: the device structure - * @cl: private data of the file object - * - * returns 1 if mei_flow_ctrl_creds >0, 0 - otherwise. - * -ENOENT if mei_cl is not present - * -EINVAL if single_recv_buf == 0 - */ -int mei_flow_ctrl_creds(struct mei_device *dev, struct mei_cl *cl) -{ - int i; - - if (!dev->me_clients_num) - return 0; - - if (cl->mei_flow_ctrl_creds > 0) - return 1; - - for (i = 0; i < dev->me_clients_num; i++) { - struct mei_me_client *me_cl = &dev->me_clients[i]; - if (me_cl->client_id == cl->me_client_id) { - if (me_cl->mei_flow_ctrl_creds) { - if (WARN_ON(me_cl->props.single_recv_buf == 0)) - return -EINVAL; - return 1; - } else { - return 0; - } - } - } - return -ENOENT; -} - -/** - * mei_flow_ctrl_reduce - reduces flow_control. - * - * @dev: the device structure - * @cl: private data of the file object - * @returns - * 0 on success - * -ENOENT when me client is not found - * -EINVAL when ctrl credits are <= 0 - */ -int mei_flow_ctrl_reduce(struct mei_device *dev, struct mei_cl *cl) -{ - int i; - - if (!dev->me_clients_num) - return -ENOENT; - - for (i = 0; i < dev->me_clients_num; i++) { - struct mei_me_client *me_cl = &dev->me_clients[i]; - if (me_cl->client_id == cl->me_client_id) { - if (me_cl->props.single_recv_buf != 0) { - if (WARN_ON(me_cl->mei_flow_ctrl_creds <= 0)) - return -EINVAL; - dev->me_clients[i].mei_flow_ctrl_creds--; - } else { - if (WARN_ON(cl->mei_flow_ctrl_creds <= 0)) - return -EINVAL; - cl->mei_flow_ctrl_creds--; - } - return 0; - } - } - return -ENOENT; -} - -/** - * mei_send_flow_control - sends flow control to fw. - * - * @dev: the device structure - * @cl: private data of the file object - * - * This function returns -EIO on write failure - */ -int mei_send_flow_control(struct mei_device *dev, struct mei_cl *cl) -{ - struct mei_msg_hdr *mei_hdr; - struct hbm_flow_control *flow_ctrl; - const size_t len = sizeof(struct hbm_flow_control); - - mei_hdr = mei_hbm_hdr(&dev->wr_msg_buf[0], len); - - flow_ctrl = (struct hbm_flow_control *)&dev->wr_msg_buf[1]; - memset(flow_ctrl, 0, len); - flow_ctrl->hbm_cmd = MEI_FLOW_CONTROL_CMD; - flow_ctrl->host_addr = cl->host_client_id; - flow_ctrl->me_addr = cl->me_client_id; - /* FIXME: reserved !? */ - memset(flow_ctrl->reserved, 0, sizeof(flow_ctrl->reserved)); - dev_dbg(&dev->pdev->dev, "sending flow control host client = %d, ME client = %d\n", - cl->host_client_id, cl->me_client_id); - - return mei_write_message(dev, mei_hdr, - (unsigned char *) flow_ctrl, len); -} - -/** - * mei_other_client_is_connecting - checks if other - * client with the same client id is connected. - * - * @dev: the device structure - * @cl: private data of the file object - * - * returns 1 if other client is connected, 0 - otherwise. - */ -int mei_other_client_is_connecting(struct mei_device *dev, - struct mei_cl *cl) -{ - struct mei_cl *cl_pos = NULL; - struct mei_cl *cl_next = NULL; - - list_for_each_entry_safe(cl_pos, cl_next, &dev->file_list, link) { - if ((cl_pos->state == MEI_FILE_CONNECTING) && - (cl_pos != cl) && - cl->me_client_id == cl_pos->me_client_id) - return 1; - - } - return 0; -} - -/** - * mei_disconnect - sends disconnect message to fw. - * - * @dev: the device structure - * @cl: private data of the file object - * - * This function returns -EIO on write failure - */ -int mei_disconnect(struct mei_device *dev, struct mei_cl *cl) -{ - struct mei_msg_hdr *mei_hdr; - struct hbm_client_connect_request *req; - const size_t len = sizeof(struct hbm_client_connect_request); - - mei_hdr = mei_hbm_hdr(&dev->wr_msg_buf[0], len); - - req = (struct hbm_client_connect_request *)&dev->wr_msg_buf[1]; - memset(req, 0, len); - req->hbm_cmd = CLIENT_DISCONNECT_REQ_CMD; - req->host_addr = cl->host_client_id; - req->me_addr = cl->me_client_id; - req->reserved = 0; - - return mei_write_message(dev, mei_hdr, (unsigned char *)req, len); -} - -/** - * mei_connect - sends connect message to fw. - * - * @dev: the device structure - * @cl: private data of the file object - * - * This function returns -EIO on write failure - */ -int mei_connect(struct mei_device *dev, struct mei_cl *cl) -{ - struct mei_msg_hdr *mei_hdr; - struct hbm_client_connect_request *req; - const size_t len = sizeof(struct hbm_client_connect_request); - - mei_hdr = mei_hbm_hdr(&dev->wr_msg_buf[0], len); - - req = (struct hbm_client_connect_request *) &dev->wr_msg_buf[1]; - req->hbm_cmd = CLIENT_CONNECT_REQ_CMD; - req->host_addr = cl->host_client_id; - req->me_addr = cl->me_client_id; - req->reserved = 0; - - return mei_write_message(dev, mei_hdr, (unsigned char *) req, len); -} diff --git a/drivers/misc/mei/interface.h b/drivers/misc/mei/interface.h deleted file mode 100644 index ec6c785a3961..000000000000 --- a/drivers/misc/mei/interface.h +++ /dev/null @@ -1,81 +0,0 @@ -/* - * - * Intel Management Engine Interface (Intel MEI) Linux driver - * Copyright (c) 2003-2012, Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - */ - - - -#ifndef _MEI_INTERFACE_H_ -#define _MEI_INTERFACE_H_ - -#include <linux/mei.h> -#include "mei_dev.h" - - - -void mei_read_slots(struct mei_device *dev, - unsigned char *buffer, - unsigned long buffer_length); - -int mei_write_message(struct mei_device *dev, - struct mei_msg_hdr *header, - unsigned char *write_buffer, - unsigned long write_length); - -bool mei_hbuf_is_empty(struct mei_device *dev); - -int mei_hbuf_empty_slots(struct mei_device *dev); - -static inline size_t mei_hbuf_max_data(const struct mei_device *dev) -{ - return dev->hbuf_depth * sizeof(u32) - sizeof(struct mei_msg_hdr); -} - -/* get slots (dwords) from a message length + header (bytes) */ -static inline unsigned char mei_data2slots(size_t length) -{ - return DIV_ROUND_UP(sizeof(struct mei_msg_hdr) + length, 4); -} - -int mei_count_full_read_slots(struct mei_device *dev); - - -int mei_flow_ctrl_creds(struct mei_device *dev, struct mei_cl *cl); - - - -int mei_wd_send(struct mei_device *dev); -int mei_wd_stop(struct mei_device *dev); -int mei_wd_host_init(struct mei_device *dev); -/* - * mei_watchdog_register - Registering watchdog interface - * once we got connection to the WD Client - * @dev - mei device - */ -void mei_watchdog_register(struct mei_device *dev); -/* - * mei_watchdog_unregister - Unregistering watchdog interface - * @dev - mei device - */ -void mei_watchdog_unregister(struct mei_device *dev); - -int mei_flow_ctrl_reduce(struct mei_device *dev, struct mei_cl *cl); - -int mei_send_flow_control(struct mei_device *dev, struct mei_cl *cl); - -int mei_disconnect(struct mei_device *dev, struct mei_cl *cl); -int mei_other_client_is_connecting(struct mei_device *dev, struct mei_cl *cl); -int mei_connect(struct mei_device *dev, struct mei_cl *cl); - -#endif /* _MEI_INTERFACE_H_ */ diff --git a/drivers/misc/mei/interrupt.c b/drivers/misc/mei/interrupt.c index 04fa2134615e..3535b2676c97 100644 --- a/drivers/misc/mei/interrupt.c +++ b/drivers/misc/mei/interrupt.c @@ -21,41 +21,21 @@ #include <linux/fs.h> #include <linux/jiffies.h> -#include "mei_dev.h" #include <linux/mei.h> -#include "hw.h" -#include "interface.h" - - -/** - * mei_interrupt_quick_handler - The ISR of the MEI device - * - * @irq: The irq number - * @dev_id: pointer to the device structure - * - * returns irqreturn_t - */ -irqreturn_t mei_interrupt_quick_handler(int irq, void *dev_id) -{ - struct mei_device *dev = (struct mei_device *) dev_id; - u32 csr_reg = mei_hcsr_read(dev); - - if ((csr_reg & H_IS) != H_IS) - return IRQ_NONE; - /* clear H_IS bit in H_CSR */ - mei_reg_write(dev, H_CSR, csr_reg); +#include "mei_dev.h" +#include "hbm.h" +#include "hw-me.h" +#include "client.h" - return IRQ_WAKE_THREAD; -} /** - * _mei_cmpl - processes completed operation. + * mei_complete_handler - processes completed operation. * * @cl: private data of the file object. * @cb_pos: callback block. */ -static void _mei_cmpl(struct mei_cl *cl, struct mei_cl_cb *cb_pos) +void mei_irq_complete_handler(struct mei_cl *cl, struct mei_cl_cb *cb_pos) { if (cb_pos->fop_type == MEI_FOP_WRITE) { mei_io_cb_free(cb_pos); @@ -150,8 +130,8 @@ quit: dev_dbg(&dev->pdev->dev, "message read\n"); if (!buffer) { mei_read_slots(dev, dev->rd_msg_buf, mei_hdr->length); - dev_dbg(&dev->pdev->dev, "discarding message, header =%08x.\n", - *(u32 *) dev->rd_msg_buf); + dev_dbg(&dev->pdev->dev, "discarding message " MEI_HDR_FMT "\n", + MEI_HDR_PRM(mei_hdr)); } return 0; @@ -179,7 +159,7 @@ static int _mei_irq_thread_close(struct mei_device *dev, s32 *slots, *slots -= mei_data2slots(sizeof(struct hbm_client_connect_request)); - if (mei_disconnect(dev, cl)) { + if (mei_hbm_cl_disconnect_req(dev, cl)) { cl->status = 0; cb_pos->buf_idx = 0; list_move_tail(&cb_pos->list, &cmpl_list->list); @@ -195,440 +175,6 @@ static int _mei_irq_thread_close(struct mei_device *dev, s32 *slots, return 0; } -/** - * is_treat_specially_client - checks if the message belongs - * to the file private data. - * - * @cl: private data of the file object - * @rs: connect response bus message - * - */ -static bool is_treat_specially_client(struct mei_cl *cl, - struct hbm_client_connect_response *rs) -{ - - if (cl->host_client_id == rs->host_addr && - cl->me_client_id == rs->me_addr) { - if (!rs->status) { - cl->state = MEI_FILE_CONNECTED; - cl->status = 0; - - } else { - cl->state = MEI_FILE_DISCONNECTED; - cl->status = -ENODEV; - } - cl->timer_count = 0; - - return true; - } - return false; -} - -/** - * mei_client_connect_response - connects to response irq routine - * - * @dev: the device structure - * @rs: connect response bus message - */ -static void mei_client_connect_response(struct mei_device *dev, - struct hbm_client_connect_response *rs) -{ - - struct mei_cl *cl; - struct mei_cl_cb *pos = NULL, *next = NULL; - - dev_dbg(&dev->pdev->dev, - "connect_response:\n" - "ME Client = %d\n" - "Host Client = %d\n" - "Status = %d\n", - rs->me_addr, - rs->host_addr, - rs->status); - - /* if WD or iamthif client treat specially */ - - if (is_treat_specially_client(&(dev->wd_cl), rs)) { - dev_dbg(&dev->pdev->dev, "successfully connected to WD client.\n"); - mei_watchdog_register(dev); - - return; - } - - if (is_treat_specially_client(&(dev->iamthif_cl), rs)) { - dev->iamthif_state = MEI_IAMTHIF_IDLE; - return; - } - list_for_each_entry_safe(pos, next, &dev->ctrl_rd_list.list, list) { - - cl = pos->cl; - if (!cl) { - list_del(&pos->list); - return; - } - if (pos->fop_type == MEI_FOP_IOCTL) { - if (is_treat_specially_client(cl, rs)) { - list_del(&pos->list); - cl->status = 0; - cl->timer_count = 0; - break; - } - } - } -} - -/** - * mei_client_disconnect_response - disconnects from response irq routine - * - * @dev: the device structure - * @rs: disconnect response bus message - */ -static void mei_client_disconnect_response(struct mei_device *dev, - struct hbm_client_connect_response *rs) -{ - struct mei_cl *cl; - struct mei_cl_cb *pos = NULL, *next = NULL; - - dev_dbg(&dev->pdev->dev, - "disconnect_response:\n" - "ME Client = %d\n" - "Host Client = %d\n" - "Status = %d\n", - rs->me_addr, - rs->host_addr, - rs->status); - - list_for_each_entry_safe(pos, next, &dev->ctrl_rd_list.list, list) { - cl = pos->cl; - - if (!cl) { - list_del(&pos->list); - return; - } - - dev_dbg(&dev->pdev->dev, "list_for_each_entry_safe in ctrl_rd_list.\n"); - if (cl->host_client_id == rs->host_addr && - cl->me_client_id == rs->me_addr) { - - list_del(&pos->list); - if (!rs->status) - cl->state = MEI_FILE_DISCONNECTED; - - cl->status = 0; - cl->timer_count = 0; - break; - } - } -} - -/** - * same_flow_addr - tells if they have the same address. - * - * @file: private data of the file object. - * @flow: flow control. - * - * returns !=0, same; 0,not. - */ -static int same_flow_addr(struct mei_cl *cl, struct hbm_flow_control *flow) -{ - return (cl->host_client_id == flow->host_addr && - cl->me_client_id == flow->me_addr); -} - -/** - * add_single_flow_creds - adds single buffer credentials. - * - * @file: private data ot the file object. - * @flow: flow control. - */ -static void add_single_flow_creds(struct mei_device *dev, - struct hbm_flow_control *flow) -{ - struct mei_me_client *client; - int i; - - for (i = 0; i < dev->me_clients_num; i++) { - client = &dev->me_clients[i]; - if (client && flow->me_addr == client->client_id) { - if (client->props.single_recv_buf) { - client->mei_flow_ctrl_creds++; - dev_dbg(&dev->pdev->dev, "recv flow ctrl msg ME %d (single).\n", - flow->me_addr); - dev_dbg(&dev->pdev->dev, "flow control credentials =%d.\n", - client->mei_flow_ctrl_creds); - } else { - BUG(); /* error in flow control */ - } - } - } -} - -/** - * mei_client_flow_control_response - flow control response irq routine - * - * @dev: the device structure - * @flow_control: flow control response bus message - */ -static void mei_client_flow_control_response(struct mei_device *dev, - struct hbm_flow_control *flow_control) -{ - struct mei_cl *cl_pos = NULL; - struct mei_cl *cl_next = NULL; - - if (!flow_control->host_addr) { - /* single receive buffer */ - add_single_flow_creds(dev, flow_control); - } else { - /* normal connection */ - list_for_each_entry_safe(cl_pos, cl_next, - &dev->file_list, link) { - dev_dbg(&dev->pdev->dev, "list_for_each_entry_safe in file_list\n"); - - dev_dbg(&dev->pdev->dev, "cl of host client %d ME client %d.\n", - cl_pos->host_client_id, - cl_pos->me_client_id); - dev_dbg(&dev->pdev->dev, "flow ctrl msg for host %d ME %d.\n", - flow_control->host_addr, - flow_control->me_addr); - if (same_flow_addr(cl_pos, flow_control)) { - dev_dbg(&dev->pdev->dev, "recv ctrl msg for host %d ME %d.\n", - flow_control->host_addr, - flow_control->me_addr); - cl_pos->mei_flow_ctrl_creds++; - dev_dbg(&dev->pdev->dev, "flow control credentials = %d.\n", - cl_pos->mei_flow_ctrl_creds); - break; - } - } - } -} - -/** - * same_disconn_addr - tells if they have the same address - * - * @file: private data of the file object. - * @disconn: disconnection request. - * - * returns !=0, same; 0,not. - */ -static int same_disconn_addr(struct mei_cl *cl, - struct hbm_client_connect_request *req) -{ - return (cl->host_client_id == req->host_addr && - cl->me_client_id == req->me_addr); -} - -/** - * mei_client_disconnect_request - disconnects from request irq routine - * - * @dev: the device structure. - * @disconnect_req: disconnect request bus message. - */ -static void mei_client_disconnect_request(struct mei_device *dev, - struct hbm_client_connect_request *disconnect_req) -{ - struct hbm_client_connect_response *disconnect_res; - struct mei_cl *pos, *next; - const size_t len = sizeof(struct hbm_client_connect_response); - - list_for_each_entry_safe(pos, next, &dev->file_list, link) { - if (same_disconn_addr(pos, disconnect_req)) { - dev_dbg(&dev->pdev->dev, "disconnect request host client %d ME client %d.\n", - disconnect_req->host_addr, - disconnect_req->me_addr); - pos->state = MEI_FILE_DISCONNECTED; - pos->timer_count = 0; - if (pos == &dev->wd_cl) - dev->wd_pending = false; - else if (pos == &dev->iamthif_cl) - dev->iamthif_timer = 0; - - /* prepare disconnect response */ - (void)mei_hbm_hdr((u32 *)&dev->wr_ext_msg.hdr, len); - disconnect_res = - (struct hbm_client_connect_response *) - &dev->wr_ext_msg.data; - disconnect_res->hbm_cmd = CLIENT_DISCONNECT_RES_CMD; - disconnect_res->host_addr = pos->host_client_id; - disconnect_res->me_addr = pos->me_client_id; - disconnect_res->status = 0; - break; - } - } -} - -/** - * mei_irq_thread_read_bus_message - bottom half read routine after ISR to - * handle the read bus message cmd processing. - * - * @dev: the device structure - * @mei_hdr: header of bus message - */ -static void mei_irq_thread_read_bus_message(struct mei_device *dev, - struct mei_msg_hdr *mei_hdr) -{ - struct mei_bus_message *mei_msg; - struct mei_me_client *me_client; - struct hbm_host_version_response *version_res; - struct hbm_client_connect_response *connect_res; - struct hbm_client_connect_response *disconnect_res; - struct hbm_client_connect_request *disconnect_req; - struct hbm_flow_control *flow_control; - struct hbm_props_response *props_res; - struct hbm_host_enum_response *enum_res; - struct hbm_host_stop_request *stop_req; - - /* read the message to our buffer */ - BUG_ON(mei_hdr->length >= sizeof(dev->rd_msg_buf)); - mei_read_slots(dev, dev->rd_msg_buf, mei_hdr->length); - mei_msg = (struct mei_bus_message *)dev->rd_msg_buf; - - switch (mei_msg->hbm_cmd) { - case HOST_START_RES_CMD: - version_res = (struct hbm_host_version_response *) mei_msg; - if (version_res->host_version_supported) { - dev->version.major_version = HBM_MAJOR_VERSION; - dev->version.minor_version = HBM_MINOR_VERSION; - if (dev->dev_state == MEI_DEV_INIT_CLIENTS && - dev->init_clients_state == MEI_START_MESSAGE) { - dev->init_clients_timer = 0; - mei_host_enum_clients_message(dev); - } else { - dev->recvd_msg = false; - dev_dbg(&dev->pdev->dev, "IMEI reset due to received host start response bus message.\n"); - mei_reset(dev, 1); - return; - } - } else { - u32 *buf = dev->wr_msg_buf; - const size_t len = sizeof(struct hbm_host_stop_request); - - dev->version = version_res->me_max_version; - - /* send stop message */ - mei_hdr = mei_hbm_hdr(&buf[0], len); - stop_req = (struct hbm_host_stop_request *)&buf[1]; - memset(stop_req, 0, len); - stop_req->hbm_cmd = HOST_STOP_REQ_CMD; - stop_req->reason = DRIVER_STOP_REQUEST; - - mei_write_message(dev, mei_hdr, - (unsigned char *)stop_req, len); - dev_dbg(&dev->pdev->dev, "version mismatch.\n"); - return; - } - - dev->recvd_msg = true; - dev_dbg(&dev->pdev->dev, "host start response message received.\n"); - break; - - case CLIENT_CONNECT_RES_CMD: - connect_res = (struct hbm_client_connect_response *) mei_msg; - mei_client_connect_response(dev, connect_res); - dev_dbg(&dev->pdev->dev, "client connect response message received.\n"); - wake_up(&dev->wait_recvd_msg); - break; - - case CLIENT_DISCONNECT_RES_CMD: - disconnect_res = (struct hbm_client_connect_response *) mei_msg; - mei_client_disconnect_response(dev, disconnect_res); - dev_dbg(&dev->pdev->dev, "client disconnect response message received.\n"); - wake_up(&dev->wait_recvd_msg); - break; - - case MEI_FLOW_CONTROL_CMD: - flow_control = (struct hbm_flow_control *) mei_msg; - mei_client_flow_control_response(dev, flow_control); - dev_dbg(&dev->pdev->dev, "client flow control response message received.\n"); - break; - - case HOST_CLIENT_PROPERTIES_RES_CMD: - props_res = (struct hbm_props_response *)mei_msg; - me_client = &dev->me_clients[dev->me_client_presentation_num]; - - if (props_res->status || !dev->me_clients) { - dev_dbg(&dev->pdev->dev, "reset due to received host client properties response bus message wrong status.\n"); - mei_reset(dev, 1); - return; - } - - if (me_client->client_id != props_res->address) { - dev_err(&dev->pdev->dev, - "Host client properties reply mismatch\n"); - mei_reset(dev, 1); - - return; - } - - if (dev->dev_state != MEI_DEV_INIT_CLIENTS || - dev->init_clients_state != MEI_CLIENT_PROPERTIES_MESSAGE) { - dev_err(&dev->pdev->dev, - "Unexpected client properties reply\n"); - mei_reset(dev, 1); - - return; - } - - me_client->props = props_res->client_properties; - dev->me_client_index++; - dev->me_client_presentation_num++; - - mei_host_client_enumerate(dev); - - break; - - case HOST_ENUM_RES_CMD: - enum_res = (struct hbm_host_enum_response *) mei_msg; - memcpy(dev->me_clients_map, enum_res->valid_addresses, 32); - if (dev->dev_state == MEI_DEV_INIT_CLIENTS && - dev->init_clients_state == MEI_ENUM_CLIENTS_MESSAGE) { - dev->init_clients_timer = 0; - dev->me_client_presentation_num = 0; - dev->me_client_index = 0; - mei_allocate_me_clients_storage(dev); - dev->init_clients_state = - MEI_CLIENT_PROPERTIES_MESSAGE; - - mei_host_client_enumerate(dev); - } else { - dev_dbg(&dev->pdev->dev, "reset due to received host enumeration clients response bus message.\n"); - mei_reset(dev, 1); - return; - } - break; - - case HOST_STOP_RES_CMD: - dev->dev_state = MEI_DEV_DISABLED; - dev_dbg(&dev->pdev->dev, "resetting because of FW stop response.\n"); - mei_reset(dev, 1); - break; - - case CLIENT_DISCONNECT_REQ_CMD: - /* search for client */ - disconnect_req = (struct hbm_client_connect_request *)mei_msg; - mei_client_disconnect_request(dev, disconnect_req); - break; - - case ME_STOP_REQ_CMD: - { - /* prepare stop request: sent in next interrupt event */ - - const size_t len = sizeof(struct hbm_host_stop_request); - - mei_hdr = mei_hbm_hdr((u32 *)&dev->wr_ext_msg.hdr, len); - stop_req = (struct hbm_host_stop_request *)&dev->wr_ext_msg.data; - memset(stop_req, 0, len); - stop_req->hbm_cmd = HOST_STOP_REQ_CMD; - stop_req->reason = DRIVER_STOP_REQUEST; - break; - } - default: - BUG(); - break; - - } -} - /** * _mei_hb_read - processes read related operation. @@ -655,7 +201,7 @@ static int _mei_irq_thread_read(struct mei_device *dev, s32 *slots, *slots -= mei_data2slots(sizeof(struct hbm_flow_control)); - if (mei_send_flow_control(dev, cl)) { + if (mei_hbm_cl_flow_control_req(dev, cl)) { cl->status = -ENODEV; cb_pos->buf_idx = 0; list_move_tail(&cb_pos->list, &cmpl_list->list); @@ -691,8 +237,8 @@ static int _mei_irq_thread_ioctl(struct mei_device *dev, s32 *slots, } cl->state = MEI_FILE_CONNECTING; - *slots -= mei_data2slots(sizeof(struct hbm_client_connect_request)); - if (mei_connect(dev, cl)) { + *slots -= mei_data2slots(sizeof(struct hbm_client_connect_request)); + if (mei_hbm_cl_connect_req(dev, cl)) { cl->status = -ENODEV; cb_pos->buf_idx = 0; list_del(&cb_pos->list); @@ -717,25 +263,24 @@ static int _mei_irq_thread_ioctl(struct mei_device *dev, s32 *slots, static int mei_irq_thread_write_complete(struct mei_device *dev, s32 *slots, struct mei_cl_cb *cb, struct mei_cl_cb *cmpl_list) { - struct mei_msg_hdr *mei_hdr; + struct mei_msg_hdr mei_hdr; struct mei_cl *cl = cb->cl; size_t len = cb->request_buffer.size - cb->buf_idx; size_t msg_slots = mei_data2slots(len); - mei_hdr = (struct mei_msg_hdr *)&dev->wr_msg_buf[0]; - mei_hdr->host_addr = cl->host_client_id; - mei_hdr->me_addr = cl->me_client_id; - mei_hdr->reserved = 0; + mei_hdr.host_addr = cl->host_client_id; + mei_hdr.me_addr = cl->me_client_id; + mei_hdr.reserved = 0; if (*slots >= msg_slots) { - mei_hdr->length = len; - mei_hdr->msg_complete = 1; + mei_hdr.length = len; + mei_hdr.msg_complete = 1; /* Split the message only if we can write the whole host buffer */ } else if (*slots == dev->hbuf_depth) { msg_slots = *slots; len = (*slots * sizeof(u32)) - sizeof(struct mei_msg_hdr); - mei_hdr->length = len; - mei_hdr->msg_complete = 0; + mei_hdr.length = len; + mei_hdr.msg_complete = 0; } else { /* wait for next time the host buffer is empty */ return 0; @@ -743,23 +288,22 @@ static int mei_irq_thread_write_complete(struct mei_device *dev, s32 *slots, dev_dbg(&dev->pdev->dev, "buf: size = %d idx = %lu\n", cb->request_buffer.size, cb->buf_idx); - dev_dbg(&dev->pdev->dev, "msg: len = %d complete = %d\n", - mei_hdr->length, mei_hdr->msg_complete); + dev_dbg(&dev->pdev->dev, MEI_HDR_FMT, MEI_HDR_PRM(&mei_hdr)); *slots -= msg_slots; - if (mei_write_message(dev, mei_hdr, - cb->request_buffer.data + cb->buf_idx, len)) { + if (mei_write_message(dev, &mei_hdr, + cb->request_buffer.data + cb->buf_idx)) { cl->status = -ENODEV; list_move_tail(&cb->list, &cmpl_list->list); return -ENODEV; } - if (mei_flow_ctrl_reduce(dev, cl)) + if (mei_cl_flow_ctrl_reduce(cl)) return -ENODEV; cl->status = 0; - cb->buf_idx += mei_hdr->length; - if (mei_hdr->msg_complete) + cb->buf_idx += mei_hdr.length; + if (mei_hdr.msg_complete) list_move_tail(&cb->list, &dev->write_waiting_list.list); return 0; @@ -769,15 +313,14 @@ static int mei_irq_thread_write_complete(struct mei_device *dev, s32 *slots, * mei_irq_thread_read_handler - bottom half read routine after ISR to * handle the read processing. * - * @cmpl_list: An instance of our list structure * @dev: the device structure + * @cmpl_list: An instance of our list structure * @slots: slots to read. * * returns 0 on success, <0 on failure. */ -static int mei_irq_thread_read_handler(struct mei_cl_cb *cmpl_list, - struct mei_device *dev, - s32 *slots) +int mei_irq_read_handler(struct mei_device *dev, + struct mei_cl_cb *cmpl_list, s32 *slots) { struct mei_msg_hdr *mei_hdr; struct mei_cl *cl_pos = NULL; @@ -785,13 +328,13 @@ static int mei_irq_thread_read_handler(struct mei_cl_cb *cmpl_list, int ret = 0; if (!dev->rd_msg_hdr) { - dev->rd_msg_hdr = mei_mecbrw_read(dev); + dev->rd_msg_hdr = mei_read_hdr(dev); dev_dbg(&dev->pdev->dev, "slots =%08x.\n", *slots); (*slots)--; dev_dbg(&dev->pdev->dev, "slots =%08x.\n", *slots); } mei_hdr = (struct mei_msg_hdr *) &dev->rd_msg_hdr; - dev_dbg(&dev->pdev->dev, "mei_hdr->length =%d\n", mei_hdr->length); + dev_dbg(&dev->pdev->dev, MEI_HDR_FMT, MEI_HDR_PRM(mei_hdr)); if (mei_hdr->reserved || !dev->rd_msg_hdr) { dev_dbg(&dev->pdev->dev, "corrupted message header.\n"); @@ -830,19 +373,18 @@ static int mei_irq_thread_read_handler(struct mei_cl_cb *cmpl_list, /* decide where to read the message too */ if (!mei_hdr->host_addr) { dev_dbg(&dev->pdev->dev, "call mei_irq_thread_read_bus_message.\n"); - mei_irq_thread_read_bus_message(dev, mei_hdr); + mei_hbm_dispatch(dev, mei_hdr); dev_dbg(&dev->pdev->dev, "end mei_irq_thread_read_bus_message.\n"); } else if (mei_hdr->host_addr == dev->iamthif_cl.host_client_id && (MEI_FILE_CONNECTED == dev->iamthif_cl.state) && (dev->iamthif_state == MEI_IAMTHIF_READING)) { dev_dbg(&dev->pdev->dev, "call mei_irq_thread_read_iamthif_message.\n"); - dev_dbg(&dev->pdev->dev, "mei_hdr->length =%d\n", - mei_hdr->length); + + dev_dbg(&dev->pdev->dev, MEI_HDR_FMT, MEI_HDR_PRM(mei_hdr)); ret = mei_amthif_irq_read_message(cmpl_list, dev, mei_hdr); if (ret) goto end; - } else { dev_dbg(&dev->pdev->dev, "call mei_irq_thread_read_client_message.\n"); ret = mei_irq_thread_read_client_message(cmpl_list, @@ -869,15 +411,15 @@ end: /** - * mei_irq_thread_write_handler - bottom half write routine after - * ISR to handle the write processing. + * mei_irq_write_handler - dispatch write requests + * after irq received * * @dev: the device structure * @cmpl_list: An instance of our list structure * * returns 0 on success, <0 on failure. */ -static int mei_irq_thread_write_handler(struct mei_device *dev, +int mei_irq_write_handler(struct mei_device *dev, struct mei_cl_cb *cmpl_list) { @@ -887,7 +429,7 @@ static int mei_irq_thread_write_handler(struct mei_device *dev, s32 slots; int ret; - if (!mei_hbuf_is_empty(dev)) { + if (!mei_hbuf_is_ready(dev)) { dev_dbg(&dev->pdev->dev, "host buffer is not empty.\n"); return 0; } @@ -930,16 +472,16 @@ static int mei_irq_thread_write_handler(struct mei_device *dev, if (dev->wr_ext_msg.hdr.length) { mei_write_message(dev, &dev->wr_ext_msg.hdr, - dev->wr_ext_msg.data, dev->wr_ext_msg.hdr.length); + dev->wr_ext_msg.data); slots -= mei_data2slots(dev->wr_ext_msg.hdr.length); dev->wr_ext_msg.hdr.length = 0; } if (dev->dev_state == MEI_DEV_ENABLED) { if (dev->wd_pending && - mei_flow_ctrl_creds(dev, &dev->wd_cl) > 0) { + mei_cl_flow_ctrl_creds(&dev->wd_cl) > 0) { if (mei_wd_send(dev)) dev_dbg(&dev->pdev->dev, "wd send failed.\n"); - else if (mei_flow_ctrl_reduce(dev, &dev->wd_cl)) + else if (mei_cl_flow_ctrl_reduce(&dev->wd_cl)) return -ENODEV; dev->wd_pending = false; @@ -978,7 +520,7 @@ static int mei_irq_thread_write_handler(struct mei_device *dev, break; case MEI_FOP_IOCTL: /* connect message */ - if (mei_other_client_is_connecting(dev, cl)) + if (mei_cl_is_other_connecting(cl)) continue; ret = _mei_irq_thread_ioctl(dev, &slots, pos, cl, cmpl_list); @@ -998,7 +540,7 @@ static int mei_irq_thread_write_handler(struct mei_device *dev, cl = pos->cl; if (cl == NULL) continue; - if (mei_flow_ctrl_creds(dev, cl) <= 0) { + if (mei_cl_flow_ctrl_creds(cl) <= 0) { dev_dbg(&dev->pdev->dev, "No flow control credentials for client %d, not sending.\n", cl->host_client_id); @@ -1123,115 +665,3 @@ out: mutex_unlock(&dev->device_lock); } -/** - * mei_interrupt_thread_handler - function called after ISR to handle the interrupt - * processing. - * - * @irq: The irq number - * @dev_id: pointer to the device structure - * - * returns irqreturn_t - * - */ -irqreturn_t mei_interrupt_thread_handler(int irq, void *dev_id) -{ - struct mei_device *dev = (struct mei_device *) dev_id; - struct mei_cl_cb complete_list; - struct mei_cl_cb *cb_pos = NULL, *cb_next = NULL; - struct mei_cl *cl; - s32 slots; - int rets; - bool bus_message_received; - - - dev_dbg(&dev->pdev->dev, "function called after ISR to handle the interrupt processing.\n"); - /* initialize our complete list */ - mutex_lock(&dev->device_lock); - mei_io_list_init(&complete_list); - dev->host_hw_state = mei_hcsr_read(dev); - - /* Ack the interrupt here - * In case of MSI we don't go through the quick handler */ - if (pci_dev_msi_enabled(dev->pdev)) - mei_reg_write(dev, H_CSR, dev->host_hw_state); - - dev->me_hw_state = mei_mecsr_read(dev); - - /* check if ME wants a reset */ - if ((dev->me_hw_state & ME_RDY_HRA) == 0 && - dev->dev_state != MEI_DEV_RESETING && - dev->dev_state != MEI_DEV_INITIALIZING) { - dev_dbg(&dev->pdev->dev, "FW not ready.\n"); - mei_reset(dev, 1); - mutex_unlock(&dev->device_lock); - return IRQ_HANDLED; - } - - /* check if we need to start the dev */ - if ((dev->host_hw_state & H_RDY) == 0) { - if ((dev->me_hw_state & ME_RDY_HRA) == ME_RDY_HRA) { - dev_dbg(&dev->pdev->dev, "we need to start the dev.\n"); - dev->host_hw_state |= (H_IE | H_IG | H_RDY); - mei_hcsr_set(dev); - dev->dev_state = MEI_DEV_INIT_CLIENTS; - dev_dbg(&dev->pdev->dev, "link is established start sending messages.\n"); - /* link is established - * start sending messages. - */ - mei_host_start_message(dev); - mutex_unlock(&dev->device_lock); - return IRQ_HANDLED; - } else { - dev_dbg(&dev->pdev->dev, "FW not ready.\n"); - mutex_unlock(&dev->device_lock); - return IRQ_HANDLED; - } - } - /* check slots available for reading */ - slots = mei_count_full_read_slots(dev); - while (slots > 0) { - /* we have urgent data to send so break the read */ - if (dev->wr_ext_msg.hdr.length) - break; - dev_dbg(&dev->pdev->dev, "slots =%08x\n", slots); - dev_dbg(&dev->pdev->dev, "call mei_irq_thread_read_handler.\n"); - rets = mei_irq_thread_read_handler(&complete_list, dev, &slots); - if (rets) - goto end; - } - rets = mei_irq_thread_write_handler(dev, &complete_list); -end: - dev_dbg(&dev->pdev->dev, "end of bottom half function.\n"); - dev->host_hw_state = mei_hcsr_read(dev); - dev->mei_host_buffer_is_empty = mei_hbuf_is_empty(dev); - - bus_message_received = false; - if (dev->recvd_msg && waitqueue_active(&dev->wait_recvd_msg)) { - dev_dbg(&dev->pdev->dev, "received waiting bus message\n"); - bus_message_received = true; - } - mutex_unlock(&dev->device_lock); - if (bus_message_received) { - dev_dbg(&dev->pdev->dev, "wake up dev->wait_recvd_msg\n"); - wake_up_interruptible(&dev->wait_recvd_msg); - bus_message_received = false; - } - if (list_empty(&complete_list.list)) - return IRQ_HANDLED; - - - list_for_each_entry_safe(cb_pos, cb_next, &complete_list.list, list) { - cl = cb_pos->cl; - list_del(&cb_pos->list); - if (cl) { - if (cl != &dev->iamthif_cl) { - dev_dbg(&dev->pdev->dev, "completing call back.\n"); - _mei_cmpl(cl, cb_pos); - cb_pos = NULL; - } else if (cl == &dev->iamthif_cl) { - mei_amthif_complete(dev, cb_pos); - } - } - } - return IRQ_HANDLED; -} diff --git a/drivers/misc/mei/iorw.c b/drivers/misc/mei/iorw.c deleted file mode 100644 index eb93a1b53b9b..000000000000 --- a/drivers/misc/mei/iorw.c +++ /dev/null @@ -1,366 +0,0 @@ -/* - * - * Intel Management Engine Interface (Intel MEI) Linux driver - * Copyright (c) 2003-2012, Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - */ - - -#include <linux/kernel.h> -#include <linux/fs.h> -#include <linux/errno.h> -#include <linux/types.h> -#include <linux/fcntl.h> -#include <linux/aio.h> -#include <linux/pci.h> -#include <linux/init.h> -#include <linux/ioctl.h> -#include <linux/cdev.h> -#include <linux/list.h> -#include <linux/delay.h> -#include <linux/sched.h> -#include <linux/uuid.h> -#include <linux/jiffies.h> -#include <linux/uaccess.h> - - -#include "mei_dev.h" -#include "hw.h" -#include <linux/mei.h> -#include "interface.h" - -/** - * mei_io_cb_free - free mei_cb_private related memory - * - * @cb: mei callback struct - */ -void mei_io_cb_free(struct mei_cl_cb *cb) -{ - if (cb == NULL) - return; - - kfree(cb->request_buffer.data); - kfree(cb->response_buffer.data); - kfree(cb); -} -/** - * mei_io_cb_init - allocate and initialize io callback - * - * @cl - mei client - * @file: pointer to file structure - * - * returns mei_cl_cb pointer or NULL; - */ -struct mei_cl_cb *mei_io_cb_init(struct mei_cl *cl, struct file *fp) -{ - struct mei_cl_cb *cb; - - cb = kzalloc(sizeof(struct mei_cl_cb), GFP_KERNEL); - if (!cb) - return NULL; - - mei_io_list_init(cb); - - cb->file_object = fp; - cb->cl = cl; - cb->buf_idx = 0; - return cb; -} - - -/** - * mei_io_cb_alloc_req_buf - allocate request buffer - * - * @cb - io callback structure - * @size: size of the buffer - * - * returns 0 on success - * -EINVAL if cb is NULL - * -ENOMEM if allocation failed - */ -int mei_io_cb_alloc_req_buf(struct mei_cl_cb *cb, size_t length) -{ - if (!cb) - return -EINVAL; - - if (length == 0) - return 0; - - cb->request_buffer.data = kmalloc(length, GFP_KERNEL); - if (!cb->request_buffer.data) - return -ENOMEM; - cb->request_buffer.size = length; - return 0; -} -/** - * mei_io_cb_alloc_req_buf - allocate respose buffer - * - * @cb - io callback structure - * @size: size of the buffer - * - * returns 0 on success - * -EINVAL if cb is NULL - * -ENOMEM if allocation failed - */ -int mei_io_cb_alloc_resp_buf(struct mei_cl_cb *cb, size_t length) -{ - if (!cb) - return -EINVAL; - - if (length == 0) - return 0; - - cb->response_buffer.data = kmalloc(length, GFP_KERNEL); - if (!cb->response_buffer.data) - return -ENOMEM; - cb->response_buffer.size = length; - return 0; -} - - -/** - * mei_me_cl_by_id return index to me_clients for client_id - * - * @dev: the device structure - * @client_id: me client id - * - * Locking: called under "dev->device_lock" lock - * - * returns index on success, -ENOENT on failure. - */ - -int mei_me_cl_by_id(struct mei_device *dev, u8 client_id) -{ - int i; - for (i = 0; i < dev->me_clients_num; i++) - if (dev->me_clients[i].client_id == client_id) - break; - if (WARN_ON(dev->me_clients[i].client_id != client_id)) - return -ENOENT; - - if (i == dev->me_clients_num) - return -ENOENT; - - return i; -} - -/** - * mei_ioctl_connect_client - the connect to fw client IOCTL function - * - * @dev: the device structure - * @data: IOCTL connect data, input and output parameters - * @file: private data of the file object - * - * Locking: called under "dev->device_lock" lock - * - * returns 0 on success, <0 on failure. - */ -int mei_ioctl_connect_client(struct file *file, - struct mei_connect_client_data *data) -{ - struct mei_device *dev; - struct mei_cl_cb *cb; - struct mei_client *client; - struct mei_cl *cl; - long timeout = mei_secs_to_jiffies(MEI_CL_CONNECT_TIMEOUT); - int i; - int err; - int rets; - - cl = file->private_data; - if (WARN_ON(!cl || !cl->dev)) - return -ENODEV; - - dev = cl->dev; - - dev_dbg(&dev->pdev->dev, "mei_ioctl_connect_client() Entry\n"); - - /* buffered ioctl cb */ - cb = mei_io_cb_init(cl, file); - if (!cb) { - rets = -ENOMEM; - goto end; - } - - cb->fop_type = MEI_FOP_IOCTL; - - if (dev->dev_state != MEI_DEV_ENABLED) { - rets = -ENODEV; - goto end; - } - if (cl->state != MEI_FILE_INITIALIZING && - cl->state != MEI_FILE_DISCONNECTED) { - rets = -EBUSY; - goto end; - } - - /* find ME client we're trying to connect to */ - i = mei_me_cl_by_uuid(dev, &data->in_client_uuid); - if (i >= 0 && !dev->me_clients[i].props.fixed_address) { - cl->me_client_id = dev->me_clients[i].client_id; - cl->state = MEI_FILE_CONNECTING; - } - - dev_dbg(&dev->pdev->dev, "Connect to FW Client ID = %d\n", - cl->me_client_id); - dev_dbg(&dev->pdev->dev, "FW Client - Protocol Version = %d\n", - dev->me_clients[i].props.protocol_version); - dev_dbg(&dev->pdev->dev, "FW Client - Max Msg Len = %d\n", - dev->me_clients[i].props.max_msg_length); - - /* if we're connecting to amthi client then we will use the - * existing connection - */ - if (uuid_le_cmp(data->in_client_uuid, mei_amthi_guid) == 0) { - dev_dbg(&dev->pdev->dev, "FW Client is amthi\n"); - if (dev->iamthif_cl.state != MEI_FILE_CONNECTED) { - rets = -ENODEV; - goto end; - } - clear_bit(cl->host_client_id, dev->host_clients_map); - mei_me_cl_unlink(dev, cl); - - kfree(cl); - cl = NULL; - file->private_data = &dev->iamthif_cl; - - client = &data->out_client_properties; - client->max_msg_length = - dev->me_clients[i].props.max_msg_length; - client->protocol_version = - dev->me_clients[i].props.protocol_version; - rets = dev->iamthif_cl.status; - - goto end; - } - - if (cl->state != MEI_FILE_CONNECTING) { - rets = -ENODEV; - goto end; - } - - - /* prepare the output buffer */ - client = &data->out_client_properties; - client->max_msg_length = dev->me_clients[i].props.max_msg_length; - client->protocol_version = dev->me_clients[i].props.protocol_version; - dev_dbg(&dev->pdev->dev, "Can connect?\n"); - if (dev->mei_host_buffer_is_empty - && !mei_other_client_is_connecting(dev, cl)) { - dev_dbg(&dev->pdev->dev, "Sending Connect Message\n"); - dev->mei_host_buffer_is_empty = false; - if (mei_connect(dev, cl)) { - dev_dbg(&dev->pdev->dev, "Sending connect message - failed\n"); - rets = -ENODEV; - goto end; - } else { - dev_dbg(&dev->pdev->dev, "Sending connect message - succeeded\n"); - cl->timer_count = MEI_CONNECT_TIMEOUT; - list_add_tail(&cb->list, &dev->ctrl_rd_list.list); - } - - - } else { - dev_dbg(&dev->pdev->dev, "Queuing the connect request due to device busy\n"); - dev_dbg(&dev->pdev->dev, "add connect cb to control write list.\n"); - list_add_tail(&cb->list, &dev->ctrl_wr_list.list); - } - mutex_unlock(&dev->device_lock); - err = wait_event_timeout(dev->wait_recvd_msg, - (MEI_FILE_CONNECTED == cl->state || - MEI_FILE_DISCONNECTED == cl->state), timeout); - - mutex_lock(&dev->device_lock); - if (MEI_FILE_CONNECTED == cl->state) { - dev_dbg(&dev->pdev->dev, "successfully connected to FW client.\n"); - rets = cl->status; - goto end; - } else { - dev_dbg(&dev->pdev->dev, "failed to connect to FW client.cl->state = %d.\n", - cl->state); - if (!err) { - dev_dbg(&dev->pdev->dev, - "wait_event_interruptible_timeout failed on client" - " connect message fw response message.\n"); - } - rets = -EFAULT; - - mei_io_list_flush(&dev->ctrl_rd_list, cl); - mei_io_list_flush(&dev->ctrl_wr_list, cl); - goto end; - } - rets = 0; -end: - dev_dbg(&dev->pdev->dev, "free connect cb memory."); - mei_io_cb_free(cb); - return rets; -} - -/** - * mei_start_read - the start read client message function. - * - * @dev: the device structure - * @if_num: minor number - * @cl: private data of the file object - * - * returns 0 on success, <0 on failure. - */ -int mei_start_read(struct mei_device *dev, struct mei_cl *cl) -{ - struct mei_cl_cb *cb; - int rets; - int i; - - if (cl->state != MEI_FILE_CONNECTED) - return -ENODEV; - - if (dev->dev_state != MEI_DEV_ENABLED) - return -ENODEV; - - if (cl->read_pending || cl->read_cb) { - dev_dbg(&dev->pdev->dev, "read is pending.\n"); - return -EBUSY; - } - i = mei_me_cl_by_id(dev, cl->me_client_id); - if (i < 0) { - dev_err(&dev->pdev->dev, "no such me client %d\n", - cl->me_client_id); - return -ENODEV; - } - - cb = mei_io_cb_init(cl, NULL); - if (!cb) - return -ENOMEM; - - rets = mei_io_cb_alloc_resp_buf(cb, - dev->me_clients[i].props.max_msg_length); - if (rets) - goto err; - - cb->fop_type = MEI_FOP_READ; - cl->read_cb = cb; - if (dev->mei_host_buffer_is_empty) { - dev->mei_host_buffer_is_empty = false; - if (mei_send_flow_control(dev, cl)) { - rets = -ENODEV; - goto err; - } - list_add_tail(&cb->list, &dev->read_list.list); - } else { - list_add_tail(&cb->list, &dev->ctrl_wr_list.list); - } - return rets; -err: - mei_io_cb_free(cb); - return rets; -} - diff --git a/drivers/misc/mei/main.c b/drivers/misc/mei/main.c index 43fb52ff98ad..903f809b21f7 100644 --- a/drivers/misc/mei/main.c +++ b/drivers/misc/mei/main.c @@ -37,79 +37,11 @@ #include <linux/interrupt.h> #include <linux/miscdevice.h> -#include "mei_dev.h" #include <linux/mei.h> -#include "interface.h" - -/* AMT device is a singleton on the platform */ -static struct pci_dev *mei_pdev; - -/* mei_pci_tbl - PCI Device ID Table */ -static DEFINE_PCI_DEVICE_TABLE(mei_pci_tbl) = { - {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_82946GZ)}, - {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_82G35)}, - {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_82Q965)}, - {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_82G965)}, - {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_82GM965)}, - {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_82GME965)}, - {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_ICH9_82Q35)}, - {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_ICH9_82G33)}, - {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_ICH9_82Q33)}, - {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_ICH9_82X38)}, - {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_ICH9_3200)}, - {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_ICH9_6)}, - {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_ICH9_7)}, - {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_ICH9_8)}, - {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_ICH9_9)}, - {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_ICH9_10)}, - {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_ICH9M_1)}, - {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_ICH9M_2)}, - {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_ICH9M_3)}, - {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_ICH9M_4)}, - {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_ICH10_1)}, - {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_ICH10_2)}, - {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_ICH10_3)}, - {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_ICH10_4)}, - {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_IBXPK_1)}, - {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_IBXPK_2)}, - {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_CPT_1)}, - {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_PBG_1)}, - {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_PPT_1)}, - {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_PPT_2)}, - {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_PPT_3)}, - {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_LPT)}, - {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_LPT_LP)}, - - /* required last entry */ - {0, } -}; - -MODULE_DEVICE_TABLE(pci, mei_pci_tbl); -static DEFINE_MUTEX(mei_mutex); - - -/** - * find_read_list_entry - find read list entry - * - * @dev: device structure - * @file: pointer to file structure - * - * returns cb on success, NULL on error - */ -static struct mei_cl_cb *find_read_list_entry( - struct mei_device *dev, - struct mei_cl *cl) -{ - struct mei_cl_cb *pos = NULL; - struct mei_cl_cb *next = NULL; - - dev_dbg(&dev->pdev->dev, "remove read_list CB\n"); - list_for_each_entry_safe(pos, next, &dev->read_list.list, list) - if (mei_cl_cmp_id(cl, pos->cl)) - return pos; - return NULL; -} +#include "mei_dev.h" +#include "hw-me.h" +#include "client.h" /** * mei_open - the open function @@ -121,16 +53,20 @@ static struct mei_cl_cb *find_read_list_entry( */ static int mei_open(struct inode *inode, struct file *file) { + struct miscdevice *misc = file->private_data; + struct pci_dev *pdev; struct mei_cl *cl; struct mei_device *dev; - unsigned long cl_id; + int err; err = -ENODEV; - if (!mei_pdev) + if (!misc->parent) goto out; - dev = pci_get_drvdata(mei_pdev); + pdev = container_of(misc->parent, struct pci_dev, dev); + + dev = pci_get_drvdata(pdev); if (!dev) goto out; @@ -153,24 +89,9 @@ static int mei_open(struct inode *inode, struct file *file) goto out_unlock; } - cl_id = find_first_zero_bit(dev->host_clients_map, MEI_CLIENTS_MAX); - if (cl_id >= MEI_CLIENTS_MAX) { - dev_err(&dev->pdev->dev, "client_id exceded %d", - MEI_CLIENTS_MAX) ; + err = mei_cl_link(cl, MEI_HOST_CLIENT_ID_ANY); + if (err) goto out_unlock; - } - - cl->host_client_id = cl_id; - - dev_dbg(&dev->pdev->dev, "client_id = %d\n", cl->host_client_id); - - dev->open_handle_count++; - - list_add_tail(&cl->link, &dev->file_list); - - set_bit(cl->host_client_id, dev->host_clients_map); - cl->state = MEI_FILE_INITIALIZING; - cl->sm_state = 0; file->private_data = cl; mutex_unlock(&dev->device_lock); @@ -216,7 +137,7 @@ static int mei_release(struct inode *inode, struct file *file) "ME client = %d\n", cl->host_client_id, cl->me_client_id); - rets = mei_disconnect_host_client(dev, cl); + rets = mei_cl_disconnect(cl); } mei_cl_flush_queues(cl); dev_dbg(&dev->pdev->dev, "remove client host client = %d, ME client = %d\n", @@ -227,12 +148,13 @@ static int mei_release(struct inode *inode, struct file *file) clear_bit(cl->host_client_id, dev->host_clients_map); dev->open_handle_count--; } - mei_me_cl_unlink(dev, cl); + mei_cl_unlink(cl); + /* free read cb */ cb = NULL; if (cl->read_cb) { - cb = find_read_list_entry(dev, cl); + cb = mei_cl_find_read_cb(cl); /* Remove entry from read list */ if (cb) list_del(&cb->list); @@ -322,7 +244,7 @@ static ssize_t mei_read(struct file *file, char __user *ubuf, goto out; } - err = mei_start_read(dev, cl); + err = mei_cl_read_start(cl); if (err && err != -EBUSY) { dev_dbg(&dev->pdev->dev, "mei start read failure with status = %d\n", err); @@ -393,14 +315,13 @@ copy_buffer: goto out; free: - cb_pos = find_read_list_entry(dev, cl); + cb_pos = mei_cl_find_read_cb(cl); /* Remove entry from read list */ if (cb_pos) list_del(&cb_pos->list); mei_io_cb_free(cb); cl->reading_state = MEI_IDLE; cl->read_cb = NULL; - cl->read_pending = 0; out: dev_dbg(&dev->pdev->dev, "end mei read rets= %d\n", rets); mutex_unlock(&dev->device_lock); @@ -475,16 +396,15 @@ static ssize_t mei_write(struct file *file, const char __user *ubuf, /* free entry used in read */ if (cl->reading_state == MEI_READ_COMPLETE) { *offset = 0; - write_cb = find_read_list_entry(dev, cl); + write_cb = mei_cl_find_read_cb(cl); if (write_cb) { list_del(&write_cb->list); mei_io_cb_free(write_cb); write_cb = NULL; cl->reading_state = MEI_IDLE; cl->read_cb = NULL; - cl->read_pending = 0; } - } else if (cl->reading_state == MEI_IDLE && !cl->read_pending) + } else if (cl->reading_state == MEI_IDLE) *offset = 0; @@ -519,7 +439,7 @@ static ssize_t mei_write(struct file *file, const char __user *ubuf, if (rets) { dev_err(&dev->pdev->dev, - "amthi write failed with status = %d\n", rets); + "amthif write failed with status = %d\n", rets); goto err; } mutex_unlock(&dev->device_lock); @@ -530,20 +450,20 @@ static ssize_t mei_write(struct file *file, const char __user *ubuf, dev_dbg(&dev->pdev->dev, "host client = %d, ME client = %d\n", cl->host_client_id, cl->me_client_id); - rets = mei_flow_ctrl_creds(dev, cl); + rets = mei_cl_flow_ctrl_creds(cl); if (rets < 0) goto err; - if (rets == 0 || dev->mei_host_buffer_is_empty == false) { + if (rets == 0 || !dev->hbuf_is_ready) { write_cb->buf_idx = 0; mei_hdr.msg_complete = 0; cl->writing_state = MEI_WRITING; goto out; } - dev->mei_host_buffer_is_empty = false; - if (length > mei_hbuf_max_data(dev)) { - mei_hdr.length = mei_hbuf_max_data(dev); + dev->hbuf_is_ready = false; + if (length > mei_hbuf_max_len(dev)) { + mei_hdr.length = mei_hbuf_max_len(dev); mei_hdr.msg_complete = 0; } else { mei_hdr.length = length; @@ -552,10 +472,10 @@ static ssize_t mei_write(struct file *file, const char __user *ubuf, mei_hdr.host_addr = cl->host_client_id; mei_hdr.me_addr = cl->me_client_id; mei_hdr.reserved = 0; - dev_dbg(&dev->pdev->dev, "call mei_write_message header=%08x.\n", - *((u32 *) &mei_hdr)); - if (mei_write_message(dev, &mei_hdr, - write_cb->request_buffer.data, mei_hdr.length)) { + + dev_dbg(&dev->pdev->dev, "write " MEI_HDR_FMT "\n", + MEI_HDR_PRM(&mei_hdr)); + if (mei_write_message(dev, &mei_hdr, write_cb->request_buffer.data)) { rets = -ENODEV; goto err; } @@ -564,7 +484,7 @@ static ssize_t mei_write(struct file *file, const char __user *ubuf, out: if (mei_hdr.msg_complete) { - if (mei_flow_ctrl_reduce(dev, cl)) { + if (mei_cl_flow_ctrl_reduce(cl)) { rets = -ENODEV; goto err; } @@ -582,6 +502,103 @@ err: return rets; } +/** + * mei_ioctl_connect_client - the connect to fw client IOCTL function + * + * @dev: the device structure + * @data: IOCTL connect data, input and output parameters + * @file: private data of the file object + * + * Locking: called under "dev->device_lock" lock + * + * returns 0 on success, <0 on failure. + */ +static int mei_ioctl_connect_client(struct file *file, + struct mei_connect_client_data *data) +{ + struct mei_device *dev; + struct mei_client *client; + struct mei_cl *cl; + int i; + int rets; + + cl = file->private_data; + if (WARN_ON(!cl || !cl->dev)) + return -ENODEV; + + dev = cl->dev; + + if (dev->dev_state != MEI_DEV_ENABLED) { + rets = -ENODEV; + goto end; + } + + if (cl->state != MEI_FILE_INITIALIZING && + cl->state != MEI_FILE_DISCONNECTED) { + rets = -EBUSY; + goto end; + } + + /* find ME client we're trying to connect to */ + i = mei_me_cl_by_uuid(dev, &data->in_client_uuid); + if (i >= 0 && !dev->me_clients[i].props.fixed_address) { + cl->me_client_id = dev->me_clients[i].client_id; + cl->state = MEI_FILE_CONNECTING; + } + + dev_dbg(&dev->pdev->dev, "Connect to FW Client ID = %d\n", + cl->me_client_id); + dev_dbg(&dev->pdev->dev, "FW Client - Protocol Version = %d\n", + dev->me_clients[i].props.protocol_version); + dev_dbg(&dev->pdev->dev, "FW Client - Max Msg Len = %d\n", + dev->me_clients[i].props.max_msg_length); + + /* if we're connecting to amthif client then we will use the + * existing connection + */ + if (uuid_le_cmp(data->in_client_uuid, mei_amthif_guid) == 0) { + dev_dbg(&dev->pdev->dev, "FW Client is amthi\n"); + if (dev->iamthif_cl.state != MEI_FILE_CONNECTED) { + rets = -ENODEV; + goto end; + } + clear_bit(cl->host_client_id, dev->host_clients_map); + mei_cl_unlink(cl); + + kfree(cl); + cl = NULL; + file->private_data = &dev->iamthif_cl; + + client = &data->out_client_properties; + client->max_msg_length = + dev->me_clients[i].props.max_msg_length; + client->protocol_version = + dev->me_clients[i].props.protocol_version; + rets = dev->iamthif_cl.status; + + goto end; + } + + if (cl->state != MEI_FILE_CONNECTING) { + rets = -ENODEV; + goto end; + } + + + /* prepare the output buffer */ + client = &data->out_client_properties; + client->max_msg_length = dev->me_clients[i].props.max_msg_length; + client->protocol_version = dev->me_clients[i].props.protocol_version; + dev_dbg(&dev->pdev->dev, "Can connect?\n"); + + + rets = mei_cl_connect(cl, file); + +end: + dev_dbg(&dev->pdev->dev, "free connect cb memory."); + return rets; +} + /** * mei_ioctl - the IOCTL function @@ -630,6 +647,7 @@ static long mei_ioctl(struct file *file, unsigned int cmd, unsigned long data) rets = -EFAULT; goto out; } + rets = mei_ioctl_connect_client(file, connect_data); /* if all is ok, copying the data back to user. */ @@ -726,7 +744,6 @@ static const struct file_operations mei_fops = { .llseek = no_llseek }; - /* * Misc Device Struct */ @@ -736,300 +753,17 @@ static struct miscdevice mei_misc_device = { .minor = MISC_DYNAMIC_MINOR, }; -/** - * mei_quirk_probe - probe for devices that doesn't valid ME interface - * @pdev: PCI device structure - * @ent: entry into pci_device_table - * - * returns true if ME Interface is valid, false otherwise - */ -static bool mei_quirk_probe(struct pci_dev *pdev, - const struct pci_device_id *ent) +int mei_register(struct device *dev) { - u32 reg; - if (ent->device == MEI_DEV_ID_PBG_1) { - pci_read_config_dword(pdev, 0x48, ®); - /* make sure that bit 9 is up and bit 10 is down */ - if ((reg & 0x600) == 0x200) { - dev_info(&pdev->dev, "Device doesn't have valid ME Interface\n"); - return false; - } - } - return true; -} -/** - * mei_probe - Device Initialization Routine - * - * @pdev: PCI device structure - * @ent: entry in kcs_pci_tbl - * - * returns 0 on success, <0 on failure. - */ -static int mei_probe(struct pci_dev *pdev, - const struct pci_device_id *ent) -{ - struct mei_device *dev; - int err; - - mutex_lock(&mei_mutex); - - if (!mei_quirk_probe(pdev, ent)) { - err = -ENODEV; - goto end; - } - - if (mei_pdev) { - err = -EEXIST; - goto end; - } - /* enable pci dev */ - err = pci_enable_device(pdev); - if (err) { - dev_err(&pdev->dev, "failed to enable pci device.\n"); - goto end; - } - /* set PCI host mastering */ - pci_set_master(pdev); - /* pci request regions for mei driver */ - err = pci_request_regions(pdev, KBUILD_MODNAME); - if (err) { - dev_err(&pdev->dev, "failed to get pci regions.\n"); - goto disable_device; - } - /* allocates and initializes the mei dev structure */ - dev = mei_device_init(pdev); - if (!dev) { - err = -ENOMEM; - goto release_regions; - } - /* mapping IO device memory */ - dev->mem_addr = pci_iomap(pdev, 0, 0); - if (!dev->mem_addr) { - dev_err(&pdev->dev, "mapping I/O device memory failure.\n"); - err = -ENOMEM; - goto free_device; - } - pci_enable_msi(pdev); - - /* request and enable interrupt */ - if (pci_dev_msi_enabled(pdev)) - err = request_threaded_irq(pdev->irq, - NULL, - mei_interrupt_thread_handler, - IRQF_ONESHOT, KBUILD_MODNAME, dev); - else - err = request_threaded_irq(pdev->irq, - mei_interrupt_quick_handler, - mei_interrupt_thread_handler, - IRQF_SHARED, KBUILD_MODNAME, dev); - - if (err) { - dev_err(&pdev->dev, "request_threaded_irq failure. irq = %d\n", - pdev->irq); - goto disable_msi; - } - INIT_DELAYED_WORK(&dev->timer_work, mei_timer); - INIT_WORK(&dev->init_work, mei_host_client_init); - - if (mei_hw_init(dev)) { - dev_err(&pdev->dev, "init hw failure.\n"); - err = -ENODEV; - goto release_irq; - } - - err = misc_register(&mei_misc_device); - if (err) - goto release_irq; - - mei_pdev = pdev; - pci_set_drvdata(pdev, dev); - - - schedule_delayed_work(&dev->timer_work, HZ); - - mutex_unlock(&mei_mutex); - - pr_debug("initialization successful.\n"); - - return 0; - -release_irq: - /* disable interrupts */ - dev->host_hw_state = mei_hcsr_read(dev); - mei_disable_interrupts(dev); - flush_scheduled_work(); - free_irq(pdev->irq, dev); -disable_msi: - pci_disable_msi(pdev); - pci_iounmap(pdev, dev->mem_addr); -free_device: - kfree(dev); -release_regions: - pci_release_regions(pdev); -disable_device: - pci_disable_device(pdev); -end: - mutex_unlock(&mei_mutex); - dev_err(&pdev->dev, "initialization failed.\n"); - return err; + mei_misc_device.parent = dev; + return misc_register(&mei_misc_device); } -/** - * mei_remove - Device Removal Routine - * - * @pdev: PCI device structure - * - * mei_remove is called by the PCI subsystem to alert the driver - * that it should release a PCI device. - */ -static void mei_remove(struct pci_dev *pdev) +void mei_deregister(void) { - struct mei_device *dev; - - if (mei_pdev != pdev) - return; - - dev = pci_get_drvdata(pdev); - if (!dev) - return; - - mutex_lock(&dev->device_lock); - - cancel_delayed_work(&dev->timer_work); - - mei_wd_stop(dev); - - mei_pdev = NULL; - - if (dev->iamthif_cl.state == MEI_FILE_CONNECTED) { - dev->iamthif_cl.state = MEI_FILE_DISCONNECTING; - mei_disconnect_host_client(dev, &dev->iamthif_cl); - } - if (dev->wd_cl.state == MEI_FILE_CONNECTED) { - dev->wd_cl.state = MEI_FILE_DISCONNECTING; - mei_disconnect_host_client(dev, &dev->wd_cl); - } - - /* Unregistering watchdog device */ - mei_watchdog_unregister(dev); - - /* remove entry if already in list */ - dev_dbg(&pdev->dev, "list del iamthif and wd file list.\n"); - mei_me_cl_unlink(dev, &dev->wd_cl); - mei_me_cl_unlink(dev, &dev->iamthif_cl); - - dev->iamthif_current_cb = NULL; - dev->me_clients_num = 0; - - mutex_unlock(&dev->device_lock); - - flush_scheduled_work(); - - /* disable interrupts */ - mei_disable_interrupts(dev); - - free_irq(pdev->irq, dev); - pci_disable_msi(pdev); - pci_set_drvdata(pdev, NULL); - - if (dev->mem_addr) - pci_iounmap(pdev, dev->mem_addr); - - kfree(dev); - - pci_release_regions(pdev); - pci_disable_device(pdev); - misc_deregister(&mei_misc_device); -} -#ifdef CONFIG_PM -static int mei_pci_suspend(struct device *device) -{ - struct pci_dev *pdev = to_pci_dev(device); - struct mei_device *dev = pci_get_drvdata(pdev); - int err; - - if (!dev) - return -ENODEV; - mutex_lock(&dev->device_lock); - - cancel_delayed_work(&dev->timer_work); - - /* Stop watchdog if exists */ - err = mei_wd_stop(dev); - /* Set new mei state */ - if (dev->dev_state == MEI_DEV_ENABLED || - dev->dev_state == MEI_DEV_RECOVERING_FROM_RESET) { - dev->dev_state = MEI_DEV_POWER_DOWN; - mei_reset(dev, 0); - } - mutex_unlock(&dev->device_lock); - - free_irq(pdev->irq, dev); - pci_disable_msi(pdev); - - return err; + mei_misc_device.parent = NULL; } -static int mei_pci_resume(struct device *device) -{ - struct pci_dev *pdev = to_pci_dev(device); - struct mei_device *dev; - int err; - - dev = pci_get_drvdata(pdev); - if (!dev) - return -ENODEV; - - pci_enable_msi(pdev); - - /* request and enable interrupt */ - if (pci_dev_msi_enabled(pdev)) - err = request_threaded_irq(pdev->irq, - NULL, - mei_interrupt_thread_handler, - IRQF_ONESHOT, KBUILD_MODNAME, dev); - else - err = request_threaded_irq(pdev->irq, - mei_interrupt_quick_handler, - mei_interrupt_thread_handler, - IRQF_SHARED, KBUILD_MODNAME, dev); - - if (err) { - dev_err(&pdev->dev, "request_threaded_irq failed: irq = %d.\n", - pdev->irq); - return err; - } - - mutex_lock(&dev->device_lock); - dev->dev_state = MEI_DEV_POWER_UP; - mei_reset(dev, 1); - mutex_unlock(&dev->device_lock); - - /* Start timer if stopped in suspend */ - schedule_delayed_work(&dev->timer_work, HZ); - - return err; -} -static SIMPLE_DEV_PM_OPS(mei_pm_ops, mei_pci_suspend, mei_pci_resume); -#define MEI_PM_OPS (&mei_pm_ops) -#else -#define MEI_PM_OPS NULL -#endif /* CONFIG_PM */ -/* - * PCI driver structure - */ -static struct pci_driver mei_driver = { - .name = KBUILD_MODNAME, - .id_table = mei_pci_tbl, - .probe = mei_probe, - .remove = mei_remove, - .shutdown = mei_remove, - .driver.pm = MEI_PM_OPS, -}; - -module_pci_driver(mei_driver); - -MODULE_AUTHOR("Intel Corporation"); -MODULE_DESCRIPTION("Intel(R) Management Engine Interface"); MODULE_LICENSE("GPL v2"); + diff --git a/drivers/misc/mei/mei_dev.h b/drivers/misc/mei/mei_dev.h index 25da04549d04..cb80166161f0 100644 --- a/drivers/misc/mei/mei_dev.h +++ b/drivers/misc/mei/mei_dev.h @@ -21,7 +21,9 @@ #include <linux/watchdog.h> #include <linux/poll.h> #include <linux/mei.h> + #include "hw.h" +#include "hw-me-regs.h" /* * watch dog definition @@ -44,7 +46,7 @@ /* * AMTHI Client UUID */ -extern const uuid_le mei_amthi_guid; +extern const uuid_le mei_amthif_guid; /* * Watchdog Client UUID @@ -65,12 +67,18 @@ extern const u8 mei_wd_state_independence_msg[3][4]; * Number of File descriptors/handles * that can be opened to the driver. * - * Limit to 253: 256 Total Clients + * Limit to 255: 256 Total Clients * minus internal client for MEI Bus Messags - * minus internal client for AMTHI - * minus internal client for Watchdog */ -#define MEI_MAX_OPEN_HANDLE_COUNT (MEI_CLIENTS_MAX - 3) +#define MEI_MAX_OPEN_HANDLE_COUNT (MEI_CLIENTS_MAX - 1) + +/* + * Internal Clients Number + */ +#define MEI_HOST_CLIENT_ID_ANY (-1) +#define MEI_HBM_HOST_CLIENT_ID 0 /* not used, just for documentation */ +#define MEI_WD_HOST_CLIENT_ID 1 +#define MEI_IAMTHIF_HOST_CLIENT_ID 2 /* File state */ @@ -150,6 +158,19 @@ struct mei_message_data { unsigned char *data; }; +/** + * struct mei_me_client - representation of me (fw) client + * + * @props - client properties + * @client_id - me client id + * @mei_flow_ctrl_creds - flow control credits + */ +struct mei_me_client { + struct mei_client_properties props; + u8 client_id; + u8 mei_flow_ctrl_creds; +}; + struct mei_cl; @@ -178,7 +199,6 @@ struct mei_cl { wait_queue_head_t tx_wait; wait_queue_head_t rx_wait; wait_queue_head_t wait; - int read_pending; int status; /* ID of client connected */ u8 host_client_id; @@ -191,10 +211,67 @@ struct mei_cl { struct mei_cl_cb *read_cb; }; +/** struct mei_hw_ops + * + * @host_set_ready - notify FW that host side is ready + * @host_is_ready - query for host readiness + + * @hw_is_ready - query if hw is ready + * @hw_reset - reset hw + * @hw_config - configure hw + + * @intr_clear - clear pending interrupts + * @intr_enable - enable interrupts + * @intr_disable - disable interrupts + + * @hbuf_free_slots - query for write buffer empty slots + * @hbuf_is_ready - query if write buffer is empty + * @hbuf_max_len - query for write buffer max len + + * @write - write a message to FW + + * @rdbuf_full_slots - query how many slots are filled + + * @read_hdr - get first 4 bytes (header) + * @read - read a buffer from the FW + */ +struct mei_hw_ops { + + void (*host_set_ready) (struct mei_device *dev); + bool (*host_is_ready) (struct mei_device *dev); + + bool (*hw_is_ready) (struct mei_device *dev); + void (*hw_reset) (struct mei_device *dev, bool enable); + void (*hw_config) (struct mei_device *dev); + + void (*intr_clear) (struct mei_device *dev); + void (*intr_enable) (struct mei_device *dev); + void (*intr_disable) (struct mei_device *dev); + + int (*hbuf_free_slots) (struct mei_device *dev); + bool (*hbuf_is_ready) (struct mei_device *dev); + size_t (*hbuf_max_len) (const struct mei_device *dev); + + int (*write)(struct mei_device *dev, + struct mei_msg_hdr *hdr, + unsigned char *buf); + + int (*rdbuf_full_slots)(struct mei_device *dev); + + u32 (*read_hdr)(const struct mei_device *dev); + int (*read) (struct mei_device *dev, + unsigned char *buf, unsigned long len); +}; + /** * struct mei_device - MEI private device struct - * @hbuf_depth - depth of host(write) buffer - * @wr_ext_msg - buffer for hbm control responses (set in read cycle) + + * @mem_addr - mem mapped base register address + + * @hbuf_depth - depth of hardware host/write buffer is slots + * @hbuf_is_ready - query if the host host/write buffer is ready + * @wr_msg - the buffer for hbm control messages + * @wr_ext_msg - the buffer for hbm control responses (set in read cycle) */ struct mei_device { struct pci_dev *pdev; /* pointer to pci device struct */ @@ -213,24 +290,14 @@ struct mei_device { */ struct list_head file_list; long open_handle_count; - /* - * memory of device - */ - unsigned int mem_base; - unsigned int mem_length; - void __iomem *mem_addr; + /* * lock for the device */ struct mutex device_lock; /* device lock */ struct delayed_work timer_work; /* MEI timer delayed work (timeouts) */ bool recvd_msg; - /* - * hw states of host and fw(ME) - */ - u32 host_hw_state; - u32 me_hw_state; - u8 hbuf_depth; + /* * waiting queue for receive message from FW */ @@ -243,11 +310,20 @@ struct mei_device { enum mei_dev_state dev_state; enum mei_init_clients_states init_clients_state; u16 init_clients_timer; - bool need_reset; unsigned char rd_msg_buf[MEI_RD_MSG_BUF_SIZE]; /* control messages */ u32 rd_msg_hdr; - u32 wr_msg_buf[128]; /* used for control messages */ + + /* write buffer */ + u8 hbuf_depth; + bool hbuf_is_ready; + + /* used for control messages */ + struct { + struct mei_msg_hdr hdr; + unsigned char data[128]; + } wr_msg; + struct { struct mei_msg_hdr hdr; unsigned char data[4]; /* All HBM messages are 4 bytes */ @@ -261,7 +337,6 @@ struct mei_device { u8 me_clients_num; u8 me_client_presentation_num; u8 me_client_index; - bool mei_host_buffer_is_empty; struct mei_cl wd_cl; enum mei_wd_states wd_state; @@ -289,6 +364,9 @@ struct mei_device { bool iamthif_canceled; struct work_struct init_work; + + const struct mei_hw_ops *ops; + char hw[0] __aligned(sizeof(void *)); }; static inline unsigned long mei_secs_to_jiffies(unsigned long sec) @@ -300,96 +378,28 @@ static inline unsigned long mei_secs_to_jiffies(unsigned long sec) /* * mei init function prototypes */ -struct mei_device *mei_device_init(struct pci_dev *pdev); +void mei_device_init(struct mei_device *dev); void mei_reset(struct mei_device *dev, int interrupts); int mei_hw_init(struct mei_device *dev); -int mei_task_initialize_clients(void *data); -int mei_initialize_clients(struct mei_device *dev); -int mei_disconnect_host_client(struct mei_device *dev, struct mei_cl *cl); -void mei_allocate_me_clients_storage(struct mei_device *dev); - - -int mei_me_cl_link(struct mei_device *dev, struct mei_cl *cl, - const uuid_le *cguid, u8 host_client_id); -void mei_me_cl_unlink(struct mei_device *dev, struct mei_cl *cl); -int mei_me_cl_by_uuid(const struct mei_device *dev, const uuid_le *cuuid); -int mei_me_cl_by_id(struct mei_device *dev, u8 client_id); - -/* - * MEI IO Functions - */ -struct mei_cl_cb *mei_io_cb_init(struct mei_cl *cl, struct file *fp); -void mei_io_cb_free(struct mei_cl_cb *priv_cb); -int mei_io_cb_alloc_req_buf(struct mei_cl_cb *cb, size_t length); -int mei_io_cb_alloc_resp_buf(struct mei_cl_cb *cb, size_t length); - - -/** - * mei_io_list_init - Sets up a queue list. - * - * @list: An instance cl callback structure - */ -static inline void mei_io_list_init(struct mei_cl_cb *list) -{ - INIT_LIST_HEAD(&list->list); -} -void mei_io_list_flush(struct mei_cl_cb *list, struct mei_cl *cl); - -/* - * MEI ME Client Functions - */ - -struct mei_cl *mei_cl_allocate(struct mei_device *dev); -void mei_cl_init(struct mei_cl *cl, struct mei_device *dev); -int mei_cl_flush_queues(struct mei_cl *cl); -/** - * mei_cl_cmp_id - tells if file private data have same id - * - * @fe1: private data of 1. file object - * @fe2: private data of 2. file object - * - * returns true - if ids are the same and not NULL - */ -static inline bool mei_cl_cmp_id(const struct mei_cl *cl1, - const struct mei_cl *cl2) -{ - return cl1 && cl2 && - (cl1->host_client_id == cl2->host_client_id) && - (cl1->me_client_id == cl2->me_client_id); -} - - - -/* - * MEI Host Client Functions - */ -void mei_host_start_message(struct mei_device *dev); -void mei_host_enum_clients_message(struct mei_device *dev); -int mei_host_client_enumerate(struct mei_device *dev); -void mei_host_client_init(struct work_struct *work); /* * MEI interrupt functions prototype */ -irqreturn_t mei_interrupt_quick_handler(int irq, void *dev_id); -irqreturn_t mei_interrupt_thread_handler(int irq, void *dev_id); -void mei_timer(struct work_struct *work); -/* - * MEI input output function prototype - */ -int mei_ioctl_connect_client(struct file *file, - struct mei_connect_client_data *data); +void mei_timer(struct work_struct *work); +int mei_irq_read_handler(struct mei_device *dev, + struct mei_cl_cb *cmpl_list, s32 *slots); -int mei_start_read(struct mei_device *dev, struct mei_cl *cl); +int mei_irq_write_handler(struct mei_device *dev, struct mei_cl_cb *cmpl_list); +void mei_irq_complete_handler(struct mei_cl *cl, struct mei_cl_cb *cb_pos); /* * AMTHIF - AMT Host Interface Functions */ void mei_amthif_reset_params(struct mei_device *dev); -void mei_amthif_host_init(struct mei_device *dev); +int mei_amthif_host_init(struct mei_device *dev); int mei_amthif_write(struct mei_device *dev, struct mei_cl_cb *priv_cb); @@ -407,9 +417,6 @@ struct mei_cl_cb *mei_amthif_find_read_list_entry(struct mei_device *dev, void mei_amthif_run_next_cmd(struct mei_device *dev); -int mei_amthif_read_message(struct mei_cl_cb *complete_list, - struct mei_device *dev, struct mei_msg_hdr *mei_hdr); - int mei_amthif_irq_write_complete(struct mei_device *dev, s32 *slots, struct mei_cl_cb *cb, struct mei_cl_cb *cmpl_list); @@ -418,92 +425,107 @@ int mei_amthif_irq_read_message(struct mei_cl_cb *complete_list, struct mei_device *dev, struct mei_msg_hdr *mei_hdr); int mei_amthif_irq_read(struct mei_device *dev, s32 *slots); + +int mei_wd_send(struct mei_device *dev); +int mei_wd_stop(struct mei_device *dev); +int mei_wd_host_init(struct mei_device *dev); /* - * Register Access Function + * mei_watchdog_register - Registering watchdog interface + * once we got connection to the WD Client + * @dev - mei device + */ +void mei_watchdog_register(struct mei_device *dev); +/* + * mei_watchdog_unregister - Unregistering watchdog interface + * @dev - mei device */ +void mei_watchdog_unregister(struct mei_device *dev); -/** - * mei_reg_read - Reads 32bit data from the mei device - * - * @dev: the device structure - * @offset: offset from which to read the data - * - * returns register value (u32) +/* + * Register Access Function */ -static inline u32 mei_reg_read(const struct mei_device *dev, - unsigned long offset) + +static inline void mei_hw_config(struct mei_device *dev) +{ + dev->ops->hw_config(dev); +} +static inline void mei_hw_reset(struct mei_device *dev, bool enable) { - return ioread32(dev->mem_addr + offset); + dev->ops->hw_reset(dev, enable); } -/** - * mei_reg_write - Writes 32bit data to the mei device - * - * @dev: the device structure - * @offset: offset from which to write the data - * @value: register value to write (u32) - */ -static inline void mei_reg_write(const struct mei_device *dev, - unsigned long offset, u32 value) +static inline void mei_clear_interrupts(struct mei_device *dev) { - iowrite32(value, dev->mem_addr + offset); + dev->ops->intr_clear(dev); } -/** - * mei_hcsr_read - Reads 32bit data from the host CSR - * - * @dev: the device structure - * - * returns the byte read. - */ -static inline u32 mei_hcsr_read(const struct mei_device *dev) +static inline void mei_enable_interrupts(struct mei_device *dev) { - return mei_reg_read(dev, H_CSR); + dev->ops->intr_enable(dev); } -/** - * mei_mecsr_read - Reads 32bit data from the ME CSR - * - * @dev: the device structure - * - * returns ME_CSR_HA register value (u32) - */ -static inline u32 mei_mecsr_read(const struct mei_device *dev) +static inline void mei_disable_interrupts(struct mei_device *dev) { - return mei_reg_read(dev, ME_CSR_HA); + dev->ops->intr_disable(dev); } -/** - * get_me_cb_rw - Reads 32bit data from the mei ME_CB_RW register - * - * @dev: the device structure - * - * returns ME_CB_RW register value (u32) - */ -static inline u32 mei_mecbrw_read(const struct mei_device *dev) +static inline void mei_host_set_ready(struct mei_device *dev) { - return mei_reg_read(dev, ME_CB_RW); + dev->ops->host_set_ready(dev); +} +static inline bool mei_host_is_ready(struct mei_device *dev) +{ + return dev->ops->host_is_ready(dev); +} +static inline bool mei_hw_is_ready(struct mei_device *dev) +{ + return dev->ops->hw_is_ready(dev); } +static inline bool mei_hbuf_is_ready(struct mei_device *dev) +{ + return dev->ops->hbuf_is_ready(dev); +} -/* - * mei interface function prototypes - */ -void mei_hcsr_set(struct mei_device *dev); -void mei_csr_clear_his(struct mei_device *dev); +static inline int mei_hbuf_empty_slots(struct mei_device *dev) +{ + return dev->ops->hbuf_free_slots(dev); +} + +static inline size_t mei_hbuf_max_len(const struct mei_device *dev) +{ + return dev->ops->hbuf_max_len(dev); +} -void mei_enable_interrupts(struct mei_device *dev); -void mei_disable_interrupts(struct mei_device *dev); +static inline int mei_write_message(struct mei_device *dev, + struct mei_msg_hdr *hdr, + unsigned char *buf) +{ + return dev->ops->write(dev, hdr, buf); +} -static inline struct mei_msg_hdr *mei_hbm_hdr(u32 *buf, size_t length) +static inline u32 mei_read_hdr(const struct mei_device *dev) { - struct mei_msg_hdr *hdr = (struct mei_msg_hdr *)buf; - hdr->host_addr = 0; - hdr->me_addr = 0; - hdr->length = length; - hdr->msg_complete = 1; - hdr->reserved = 0; - return hdr; + return dev->ops->read_hdr(dev); } +static inline void mei_read_slots(struct mei_device *dev, + unsigned char *buf, unsigned long len) +{ + dev->ops->read(dev, buf, len); +} + +static inline int mei_count_full_read_slots(struct mei_device *dev) +{ + return dev->ops->rdbuf_full_slots(dev); +} + +int mei_register(struct device *dev); +void mei_deregister(void); + +#define MEI_HDR_FMT "hdr:host=%02d me=%02d len=%d comp=%1d" +#define MEI_HDR_PRM(hdr) \ + (hdr)->host_addr, (hdr)->me_addr, \ + (hdr)->length, (hdr)->msg_complete + #endif diff --git a/drivers/misc/mei/pci-me.c b/drivers/misc/mei/pci-me.c new file mode 100644 index 000000000000..b40ec0601ab0 --- /dev/null +++ b/drivers/misc/mei/pci-me.c @@ -0,0 +1,396 @@ +/* + * + * Intel Management Engine Interface (Intel MEI) Linux driver + * Copyright (c) 2003-2012, Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/kernel.h> +#include <linux/device.h> +#include <linux/fs.h> +#include <linux/errno.h> +#include <linux/types.h> +#include <linux/fcntl.h> +#include <linux/aio.h> +#include <linux/pci.h> +#include <linux/poll.h> +#include <linux/init.h> +#include <linux/ioctl.h> +#include <linux/cdev.h> +#include <linux/sched.h> +#include <linux/uuid.h> +#include <linux/compat.h> +#include <linux/jiffies.h> +#include <linux/interrupt.h> +#include <linux/miscdevice.h> + +#include <linux/mei.h> + +#include "mei_dev.h" +#include "hw-me.h" +#include "client.h" + +/* AMT device is a singleton on the platform */ +static struct pci_dev *mei_pdev; + +/* mei_pci_tbl - PCI Device ID Table */ +static DEFINE_PCI_DEVICE_TABLE(mei_pci_tbl) = { + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_82946GZ)}, + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_82G35)}, + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_82Q965)}, + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_82G965)}, + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_82GM965)}, + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_82GME965)}, + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_ICH9_82Q35)}, + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_ICH9_82G33)}, + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_ICH9_82Q33)}, + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_ICH9_82X38)}, + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_ICH9_3200)}, + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_ICH9_6)}, + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_ICH9_7)}, + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_ICH9_8)}, + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_ICH9_9)}, + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_ICH9_10)}, + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_ICH9M_1)}, + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_ICH9M_2)}, + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_ICH9M_3)}, + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_ICH9M_4)}, + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_ICH10_1)}, + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_ICH10_2)}, + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_ICH10_3)}, + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_ICH10_4)}, + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_IBXPK_1)}, + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_IBXPK_2)}, + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_CPT_1)}, + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_PBG_1)}, + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_PPT_1)}, + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_PPT_2)}, + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_PPT_3)}, + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_LPT)}, + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MEI_DEV_ID_LPT_LP)}, + + /* required last entry */ + {0, } +}; + +MODULE_DEVICE_TABLE(pci, mei_pci_tbl); + +static DEFINE_MUTEX(mei_mutex); + +/** + * mei_quirk_probe - probe for devices that doesn't valid ME interface + * @pdev: PCI device structure + * @ent: entry into pci_device_table + * + * returns true if ME Interface is valid, false otherwise + */ +static bool mei_quirk_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + u32 reg; + if (ent->device == MEI_DEV_ID_PBG_1) { + pci_read_config_dword(pdev, 0x48, ®); + /* make sure that bit 9 is up and bit 10 is down */ + if ((reg & 0x600) == 0x200) { + dev_info(&pdev->dev, "Device doesn't have valid ME Interface\n"); + return false; + } + } + return true; +} +/** + * mei_probe - Device Initialization Routine + * + * @pdev: PCI device structure + * @ent: entry in kcs_pci_tbl + * + * returns 0 on success, <0 on failure. + */ +static int mei_probe(struct pci_dev *pdev, const struct pci_device_id *ent) +{ + struct mei_device *dev; + struct mei_me_hw *hw; + int err; + + mutex_lock(&mei_mutex); + + if (!mei_quirk_probe(pdev, ent)) { + err = -ENODEV; + goto end; + } + + if (mei_pdev) { + err = -EEXIST; + goto end; + } + /* enable pci dev */ + err = pci_enable_device(pdev); + if (err) { + dev_err(&pdev->dev, "failed to enable pci device.\n"); + goto end; + } + /* set PCI host mastering */ + pci_set_master(pdev); + /* pci request regions for mei driver */ + err = pci_request_regions(pdev, KBUILD_MODNAME); + if (err) { + dev_err(&pdev->dev, "failed to get pci regions.\n"); + goto disable_device; + } + /* allocates and initializes the mei dev structure */ + dev = mei_me_dev_init(pdev); + if (!dev) { + err = -ENOMEM; + goto release_regions; + } + hw = to_me_hw(dev); + /* mapping IO device memory */ + hw->mem_addr = pci_iomap(pdev, 0, 0); + if (!hw->mem_addr) { + dev_err(&pdev->dev, "mapping I/O device memory failure.\n"); + err = -ENOMEM; + goto free_device; + } + pci_enable_msi(pdev); + + /* request and enable interrupt */ + if (pci_dev_msi_enabled(pdev)) + err = request_threaded_irq(pdev->irq, + NULL, + mei_me_irq_thread_handler, + IRQF_ONESHOT, KBUILD_MODNAME, dev); + else + err = request_threaded_irq(pdev->irq, + mei_me_irq_quick_handler, + mei_me_irq_thread_handler, + IRQF_SHARED, KBUILD_MODNAME, dev); + + if (err) { + dev_err(&pdev->dev, "request_threaded_irq failure. irq = %d\n", + pdev->irq); + goto disable_msi; + } + + if (mei_hw_init(dev)) { + dev_err(&pdev->dev, "init hw failure.\n"); + err = -ENODEV; + goto release_irq; + } + + err = mei_register(&pdev->dev); + if (err) + goto release_irq; + + mei_pdev = pdev; + pci_set_drvdata(pdev, dev); + + + schedule_delayed_work(&dev->timer_work, HZ); + + mutex_unlock(&mei_mutex); + + pr_debug("initialization successful.\n"); + + return 0; + +release_irq: + mei_disable_interrupts(dev); + flush_scheduled_work(); + free_irq(pdev->irq, dev); +disable_msi: + pci_disable_msi(pdev); + pci_iounmap(pdev, hw->mem_addr); +free_device: + kfree(dev); +release_regions: + pci_release_regions(pdev); +disable_device: + pci_disable_device(pdev); +end: + mutex_unlock(&mei_mutex); + dev_err(&pdev->dev, "initialization failed.\n"); + return err; +} + +/** + * mei_remove - Device Removal Routine + * + * @pdev: PCI device structure + * + * mei_remove is called by the PCI subsystem to alert the driver + * that it should release a PCI device. + */ +static void mei_remove(struct pci_dev *pdev) +{ + struct mei_device *dev; + struct mei_me_hw *hw; + + if (mei_pdev != pdev) + return; + + dev = pci_get_drvdata(pdev); + if (!dev) + return; + + hw = to_me_hw(dev); + + mutex_lock(&dev->device_lock); + + cancel_delayed_work(&dev->timer_work); + + mei_wd_stop(dev); + + mei_pdev = NULL; + + if (dev->iamthif_cl.state == MEI_FILE_CONNECTED) { + dev->iamthif_cl.state = MEI_FILE_DISCONNECTING; + mei_cl_disconnect(&dev->iamthif_cl); + } + if (dev->wd_cl.state == MEI_FILE_CONNECTED) { + dev->wd_cl.state = MEI_FILE_DISCONNECTING; + mei_cl_disconnect(&dev->wd_cl); + } + + /* Unregistering watchdog device */ + mei_watchdog_unregister(dev); + + /* remove entry if already in list */ + dev_dbg(&pdev->dev, "list del iamthif and wd file list.\n"); + + if (dev->open_handle_count > 0) + dev->open_handle_count--; + mei_cl_unlink(&dev->wd_cl); + + if (dev->open_handle_count > 0) + dev->open_handle_count--; + mei_cl_unlink(&dev->iamthif_cl); + + dev->iamthif_current_cb = NULL; + dev->me_clients_num = 0; + + mutex_unlock(&dev->device_lock); + + flush_scheduled_work(); + + /* disable interrupts */ + mei_disable_interrupts(dev); + + free_irq(pdev->irq, dev); + pci_disable_msi(pdev); + pci_set_drvdata(pdev, NULL); + + if (hw->mem_addr) + pci_iounmap(pdev, hw->mem_addr); + + kfree(dev); + + pci_release_regions(pdev); + pci_disable_device(pdev); + + mei_deregister(); + +} +#ifdef CONFIG_PM +static int mei_pci_suspend(struct device *device) +{ + struct pci_dev *pdev = to_pci_dev(device); + struct mei_device *dev = pci_get_drvdata(pdev); + int err; + + if (!dev) + return -ENODEV; + mutex_lock(&dev->device_lock); + + cancel_delayed_work(&dev->timer_work); + + /* Stop watchdog if exists */ + err = mei_wd_stop(dev); + /* Set new mei state */ + if (dev->dev_state == MEI_DEV_ENABLED || + dev->dev_state == MEI_DEV_RECOVERING_FROM_RESET) { + dev->dev_state = MEI_DEV_POWER_DOWN; + mei_reset(dev, 0); + } + mutex_unlock(&dev->device_lock); + + free_irq(pdev->irq, dev); + pci_disable_msi(pdev); + + return err; +} + +static int mei_pci_resume(struct device *device) +{ + struct pci_dev *pdev = to_pci_dev(device); + struct mei_device *dev; + int err; + + dev = pci_get_drvdata(pdev); + if (!dev) + return -ENODEV; + + pci_enable_msi(pdev); + + /* request and enable interrupt */ + if (pci_dev_msi_enabled(pdev)) + err = request_threaded_irq(pdev->irq, + NULL, + mei_me_irq_thread_handler, + IRQF_ONESHOT, KBUILD_MODNAME, dev); + else + err = request_threaded_irq(pdev->irq, + mei_me_irq_quick_handler, + mei_me_irq_thread_handler, + IRQF_SHARED, KBUILD_MODNAME, dev); + + if (err) { + dev_err(&pdev->dev, "request_threaded_irq failed: irq = %d.\n", + pdev->irq); + return err; + } + + mutex_lock(&dev->device_lock); + dev->dev_state = MEI_DEV_POWER_UP; + mei_reset(dev, 1); + mutex_unlock(&dev->device_lock); + + /* Start timer if stopped in suspend */ + schedule_delayed_work(&dev->timer_work, HZ); + + return err; +} +static SIMPLE_DEV_PM_OPS(mei_pm_ops, mei_pci_suspend, mei_pci_resume); +#define MEI_PM_OPS (&mei_pm_ops) +#else +#define MEI_PM_OPS NULL +#endif /* CONFIG_PM */ +/* + * PCI driver structure + */ +static struct pci_driver mei_driver = { + .name = KBUILD_MODNAME, + .id_table = mei_pci_tbl, + .probe = mei_probe, + .remove = mei_remove, + .shutdown = mei_remove, + .driver.pm = MEI_PM_OPS, +}; + +module_pci_driver(mei_driver); + +MODULE_AUTHOR("Intel Corporation"); +MODULE_DESCRIPTION("Intel(R) Management Engine Interface"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/misc/mei/wd.c b/drivers/misc/mei/wd.c index 9299a8c29a6f..2413247fc392 100644 --- a/drivers/misc/mei/wd.c +++ b/drivers/misc/mei/wd.c @@ -21,11 +21,13 @@ #include <linux/sched.h> #include <linux/watchdog.h> -#include "mei_dev.h" -#include "hw.h" -#include "interface.h" #include <linux/mei.h> +#include "mei_dev.h" +#include "hbm.h" +#include "hw-me.h" +#include "client.h" + static const u8 mei_start_wd_params[] = { 0x02, 0x12, 0x13, 0x10 }; static const u8 mei_stop_wd_params[] = { 0x02, 0x02, 0x14, 0x10 }; @@ -62,30 +64,41 @@ static void mei_wd_set_start_timeout(struct mei_device *dev, u16 timeout) */ int mei_wd_host_init(struct mei_device *dev) { - int id; - mei_cl_init(&dev->wd_cl, dev); + struct mei_cl *cl = &dev->wd_cl; + int i; + int ret; + + mei_cl_init(cl, dev); - /* look for WD client and connect to it */ - dev->wd_cl.state = MEI_FILE_DISCONNECTED; dev->wd_timeout = MEI_WD_DEFAULT_TIMEOUT; dev->wd_state = MEI_WD_IDLE; - /* Connect WD ME client to the host client */ - id = mei_me_cl_link(dev, &dev->wd_cl, - &mei_wd_guid, MEI_WD_HOST_CLIENT_ID); - if (id < 0) { + /* check for valid client id */ + i = mei_me_cl_by_uuid(dev, &mei_wd_guid); + if (i < 0) { dev_info(&dev->pdev->dev, "wd: failed to find the client\n"); return -ENOENT; } - if (mei_connect(dev, &dev->wd_cl)) { + cl->me_client_id = dev->me_clients[i].client_id; + + ret = mei_cl_link(cl, MEI_WD_HOST_CLIENT_ID); + + if (ret < 0) { + dev_info(&dev->pdev->dev, "wd: failed link client\n"); + return -ENOENT; + } + + cl->state = MEI_FILE_CONNECTING; + + if (mei_hbm_cl_connect_req(dev, cl)) { dev_err(&dev->pdev->dev, "wd: failed to connect to the client\n"); - dev->wd_cl.state = MEI_FILE_DISCONNECTED; - dev->wd_cl.host_client_id = 0; + cl->state = MEI_FILE_DISCONNECTED; + cl->host_client_id = 0; return -EIO; } - dev->wd_cl.timer_count = MEI_CONNECT_TIMEOUT; + cl->timer_count = MEI_CONNECT_TIMEOUT; return 0; } @@ -101,22 +114,21 @@ int mei_wd_host_init(struct mei_device *dev) */ int mei_wd_send(struct mei_device *dev) { - struct mei_msg_hdr *mei_hdr; + struct mei_msg_hdr hdr; - mei_hdr = (struct mei_msg_hdr *) &dev->wr_msg_buf[0]; - mei_hdr->host_addr = dev->wd_cl.host_client_id; - mei_hdr->me_addr = dev->wd_cl.me_client_id; - mei_hdr->msg_complete = 1; - mei_hdr->reserved = 0; + hdr.host_addr = dev->wd_cl.host_client_id; + hdr.me_addr = dev->wd_cl.me_client_id; + hdr.msg_complete = 1; + hdr.reserved = 0; if (!memcmp(dev->wd_data, mei_start_wd_params, MEI_WD_HDR_SIZE)) - mei_hdr->length = MEI_WD_START_MSG_SIZE; + hdr.length = MEI_WD_START_MSG_SIZE; else if (!memcmp(dev->wd_data, mei_stop_wd_params, MEI_WD_HDR_SIZE)) - mei_hdr->length = MEI_WD_STOP_MSG_SIZE; + hdr.length = MEI_WD_STOP_MSG_SIZE; else return -EINVAL; - return mei_write_message(dev, mei_hdr, dev->wd_data, mei_hdr->length); + return mei_write_message(dev, &hdr, dev->wd_data); } /** @@ -141,16 +153,16 @@ int mei_wd_stop(struct mei_device *dev) dev->wd_state = MEI_WD_STOPPING; - ret = mei_flow_ctrl_creds(dev, &dev->wd_cl); + ret = mei_cl_flow_ctrl_creds(&dev->wd_cl); if (ret < 0) goto out; - if (ret && dev->mei_host_buffer_is_empty) { + if (ret && dev->hbuf_is_ready) { ret = 0; - dev->mei_host_buffer_is_empty = false; + dev->hbuf_is_ready = false; if (!mei_wd_send(dev)) { - ret = mei_flow_ctrl_reduce(dev, &dev->wd_cl); + ret = mei_cl_flow_ctrl_reduce(&dev->wd_cl); if (ret) goto out; } else { @@ -270,10 +282,9 @@ static int mei_wd_ops_ping(struct watchdog_device *wd_dev) dev->wd_state = MEI_WD_RUNNING; /* Check if we can send the ping to HW*/ - if (dev->mei_host_buffer_is_empty && - mei_flow_ctrl_creds(dev, &dev->wd_cl) > 0) { + if (dev->hbuf_is_ready && mei_cl_flow_ctrl_creds(&dev->wd_cl) > 0) { - dev->mei_host_buffer_is_empty = false; + dev->hbuf_is_ready = false; dev_dbg(&dev->pdev->dev, "wd: sending ping\n"); if (mei_wd_send(dev)) { @@ -282,9 +293,9 @@ static int mei_wd_ops_ping(struct watchdog_device *wd_dev) goto end; } - if (mei_flow_ctrl_reduce(dev, &dev->wd_cl)) { + if (mei_cl_flow_ctrl_reduce(&dev->wd_cl)) { dev_err(&dev->pdev->dev, - "wd: mei_flow_ctrl_reduce() failed.\n"); + "wd: mei_cl_flow_ctrl_reduce() failed.\n"); ret = -EIO; goto end; } diff --git a/drivers/misc/ti-st/st_core.c b/drivers/misc/ti-st/st_core.c index b90a2241d79c..0a1428016350 100644 --- a/drivers/misc/ti-st/st_core.c +++ b/drivers/misc/ti-st/st_core.c @@ -240,7 +240,8 @@ void st_int_recv(void *disc_data, char *ptr; struct st_proto_s *proto; unsigned short payload_len = 0; - int len = 0, type = 0; + int len = 0; + unsigned char type = 0; unsigned char *plen; struct st_data_s *st_gdata = (struct st_data_s *)disc_data; unsigned long flags; diff --git a/drivers/misc/vmw_vmci/Kconfig b/drivers/misc/vmw_vmci/Kconfig new file mode 100644 index 000000000000..39c2ecadb273 --- /dev/null +++ b/drivers/misc/vmw_vmci/Kconfig @@ -0,0 +1,16 @@ +# +# VMware VMCI device +# + +config VMWARE_VMCI + tristate "VMware VMCI Driver" + depends on X86 && PCI + help + This is VMware's Virtual Machine Communication Interface. It enables + high-speed communication between host and guest in a virtual + environment via the VMCI virtual device. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called vmw_vmci. diff --git a/drivers/misc/vmw_vmci/Makefile b/drivers/misc/vmw_vmci/Makefile new file mode 100644 index 000000000000..4da9893c3942 --- /dev/null +++ b/drivers/misc/vmw_vmci/Makefile @@ -0,0 +1,4 @@ +obj-$(CONFIG_VMWARE_VMCI) += vmw_vmci.o +vmw_vmci-y += vmci_context.o vmci_datagram.o vmci_doorbell.o \ + vmci_driver.o vmci_event.o vmci_guest.o vmci_handle_array.o \ + vmci_host.o vmci_queue_pair.o vmci_resource.o vmci_route.o diff --git a/drivers/misc/vmw_vmci/vmci_context.c b/drivers/misc/vmw_vmci/vmci_context.c new file mode 100644 index 000000000000..f866a4baecb5 --- /dev/null +++ b/drivers/misc/vmw_vmci/vmci_context.c @@ -0,0 +1,1214 @@ +/* + * VMware VMCI Driver + * + * Copyright (C) 2012 VMware, Inc. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation version 2 and no later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY + * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#include <linux/vmw_vmci_defs.h> +#include <linux/vmw_vmci_api.h> +#include <linux/highmem.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/sched.h> +#include <linux/slab.h> + +#include "vmci_queue_pair.h" +#include "vmci_datagram.h" +#include "vmci_doorbell.h" +#include "vmci_context.h" +#include "vmci_driver.h" +#include "vmci_event.h" + +/* + * List of current VMCI contexts. Contexts can be added by + * vmci_ctx_create() and removed via vmci_ctx_destroy(). + * These, along with context lookup, are protected by the + * list structure's lock. + */ +static struct { + struct list_head head; + spinlock_t lock; /* Spinlock for context list operations */ +} ctx_list = { + .head = LIST_HEAD_INIT(ctx_list.head), + .lock = __SPIN_LOCK_UNLOCKED(ctx_list.lock), +}; + +/* Used by contexts that did not set up notify flag pointers */ +static bool ctx_dummy_notify; + +static void ctx_signal_notify(struct vmci_ctx *context) +{ + *context->notify = true; +} + +static void ctx_clear_notify(struct vmci_ctx *context) +{ + *context->notify = false; +} + +/* + * If nothing requires the attention of the guest, clears both + * notify flag and call. + */ +static void ctx_clear_notify_call(struct vmci_ctx *context) +{ + if (context->pending_datagrams == 0 && + vmci_handle_arr_get_size(context->pending_doorbell_array) == 0) + ctx_clear_notify(context); +} + +/* + * Sets the context's notify flag iff datagrams are pending for this + * context. Called from vmci_setup_notify(). + */ +void vmci_ctx_check_signal_notify(struct vmci_ctx *context) +{ + spin_lock(&context->lock); + if (context->pending_datagrams) + ctx_signal_notify(context); + spin_unlock(&context->lock); +} + +/* + * Allocates and initializes a VMCI context. + */ +struct vmci_ctx *vmci_ctx_create(u32 cid, u32 priv_flags, + uintptr_t event_hnd, + int user_version, + const struct cred *cred) +{ + struct vmci_ctx *context; + int error; + + if (cid == VMCI_INVALID_ID) { + pr_devel("Invalid context ID for VMCI context\n"); + error = -EINVAL; + goto err_out; + } + + if (priv_flags & ~VMCI_PRIVILEGE_ALL_FLAGS) { + pr_devel("Invalid flag (flags=0x%x) for VMCI context\n", + priv_flags); + error = -EINVAL; + goto err_out; + } + + if (user_version == 0) { + pr_devel("Invalid suer_version %d\n", user_version); + error = -EINVAL; + goto err_out; + } + + context = kzalloc(sizeof(*context), GFP_KERNEL); + if (!context) { + pr_warn("Failed to allocate memory for VMCI context\n"); + error = -EINVAL; + goto err_out; + } + + kref_init(&context->kref); + spin_lock_init(&context->lock); + INIT_LIST_HEAD(&context->list_item); + INIT_LIST_HEAD(&context->datagram_queue); + INIT_LIST_HEAD(&context->notifier_list); + + /* Initialize host-specific VMCI context. */ + init_waitqueue_head(&context->host_context.wait_queue); + + context->queue_pair_array = vmci_handle_arr_create(0); + if (!context->queue_pair_array) { + error = -ENOMEM; + goto err_free_ctx; + } + + context->doorbell_array = vmci_handle_arr_create(0); + if (!context->doorbell_array) { + error = -ENOMEM; + goto err_free_qp_array; + } + + context->pending_doorbell_array = vmci_handle_arr_create(0); + if (!context->pending_doorbell_array) { + error = -ENOMEM; + goto err_free_db_array; + } + + context->user_version = user_version; + + context->priv_flags = priv_flags; + + if (cred) + context->cred = get_cred(cred); + + context->notify = &ctx_dummy_notify; + context->notify_page = NULL; + + /* + * If we collide with an existing context we generate a new + * and use it instead. The VMX will determine if regeneration + * is okay. Since there isn't 4B - 16 VMs running on a given + * host, the below loop will terminate. + */ + spin_lock(&ctx_list.lock); + + while (vmci_ctx_exists(cid)) { + /* We reserve the lowest 16 ids for fixed contexts. */ + cid = max(cid, VMCI_RESERVED_CID_LIMIT - 1) + 1; + if (cid == VMCI_INVALID_ID) + cid = VMCI_RESERVED_CID_LIMIT; + } + context->cid = cid; + + list_add_tail_rcu(&context->list_item, &ctx_list.head); + spin_unlock(&ctx_list.lock); + + return context; + + err_free_db_array: + vmci_handle_arr_destroy(context->doorbell_array); + err_free_qp_array: + vmci_handle_arr_destroy(context->queue_pair_array); + err_free_ctx: + kfree(context); + err_out: + return ERR_PTR(error); +} + +/* + * Destroy VMCI context. + */ +void vmci_ctx_destroy(struct vmci_ctx *context) +{ + spin_lock(&ctx_list.lock); + list_del_rcu(&context->list_item); + spin_unlock(&ctx_list.lock); + synchronize_rcu(); + + vmci_ctx_put(context); +} + +/* + * Fire notification for all contexts interested in given cid. + */ +static int ctx_fire_notification(u32 context_id, u32 priv_flags) +{ + u32 i, array_size; + struct vmci_ctx *sub_ctx; + struct vmci_handle_arr *subscriber_array; + struct vmci_handle context_handle = + vmci_make_handle(context_id, VMCI_EVENT_HANDLER); + + /* + * We create an array to hold the subscribers we find when + * scanning through all contexts. + */ + subscriber_array = vmci_handle_arr_create(0); + if (subscriber_array == NULL) + return VMCI_ERROR_NO_MEM; + + /* + * Scan all contexts to find who is interested in being + * notified about given contextID. + */ + rcu_read_lock(); + list_for_each_entry_rcu(sub_ctx, &ctx_list.head, list_item) { + struct vmci_handle_list *node; + + /* + * We only deliver notifications of the removal of + * contexts, if the two contexts are allowed to + * interact. + */ + if (vmci_deny_interaction(priv_flags, sub_ctx->priv_flags)) + continue; + + list_for_each_entry_rcu(node, &sub_ctx->notifier_list, node) { + if (!vmci_handle_is_equal(node->handle, context_handle)) + continue; + + vmci_handle_arr_append_entry(&subscriber_array, + vmci_make_handle(sub_ctx->cid, + VMCI_EVENT_HANDLER)); + } + } + rcu_read_unlock(); + + /* Fire event to all subscribers. */ + array_size = vmci_handle_arr_get_size(subscriber_array); + for (i = 0; i < array_size; i++) { + int result; + struct vmci_event_ctx ev; + + ev.msg.hdr.dst = vmci_handle_arr_get_entry(subscriber_array, i); + ev.msg.hdr.src = vmci_make_handle(VMCI_HYPERVISOR_CONTEXT_ID, + VMCI_CONTEXT_RESOURCE_ID); + ev.msg.hdr.payload_size = sizeof(ev) - sizeof(ev.msg.hdr); + ev.msg.event_data.event = VMCI_EVENT_CTX_REMOVED; + ev.payload.context_id = context_id; + + result = vmci_datagram_dispatch(VMCI_HYPERVISOR_CONTEXT_ID, + &ev.msg.hdr, false); + if (result < VMCI_SUCCESS) { + pr_devel("Failed to enqueue event datagram (type=%d) for context (ID=0x%x)\n", + ev.msg.event_data.event, + ev.msg.hdr.dst.context); + /* We continue to enqueue on next subscriber. */ + } + } + vmci_handle_arr_destroy(subscriber_array); + + return VMCI_SUCCESS; +} + +/* + * Returns the current number of pending datagrams. The call may + * also serve as a synchronization point for the datagram queue, + * as no enqueue operations can occur concurrently. + */ +int vmci_ctx_pending_datagrams(u32 cid, u32 *pending) +{ + struct vmci_ctx *context; + + context = vmci_ctx_get(cid); + if (context == NULL) + return VMCI_ERROR_INVALID_ARGS; + + spin_lock(&context->lock); + if (pending) + *pending = context->pending_datagrams; + spin_unlock(&context->lock); + vmci_ctx_put(context); + + return VMCI_SUCCESS; +} + +/* + * Queues a VMCI datagram for the appropriate target VM context. + */ +int vmci_ctx_enqueue_datagram(u32 cid, struct vmci_datagram *dg) +{ + struct vmci_datagram_queue_entry *dq_entry; + struct vmci_ctx *context; + struct vmci_handle dg_src; + size_t vmci_dg_size; + + vmci_dg_size = VMCI_DG_SIZE(dg); + if (vmci_dg_size > VMCI_MAX_DG_SIZE) { + pr_devel("Datagram too large (bytes=%Zu)\n", vmci_dg_size); + return VMCI_ERROR_INVALID_ARGS; + } + + /* Get the target VM's VMCI context. */ + context = vmci_ctx_get(cid); + if (!context) { + pr_devel("Invalid context (ID=0x%x)\n", cid); + return VMCI_ERROR_INVALID_ARGS; + } + + /* Allocate guest call entry and add it to the target VM's queue. */ + dq_entry = kmalloc(sizeof(*dq_entry), GFP_KERNEL); + if (dq_entry == NULL) { + pr_warn("Failed to allocate memory for datagram\n"); + vmci_ctx_put(context); + return VMCI_ERROR_NO_MEM; + } + dq_entry->dg = dg; + dq_entry->dg_size = vmci_dg_size; + dg_src = dg->src; + INIT_LIST_HEAD(&dq_entry->list_item); + + spin_lock(&context->lock); + + /* + * We put a higher limit on datagrams from the hypervisor. If + * the pending datagram is not from hypervisor, then we check + * if enqueueing it would exceed the + * VMCI_MAX_DATAGRAM_QUEUE_SIZE limit on the destination. If + * the pending datagram is from hypervisor, we allow it to be + * queued at the destination side provided we don't reach the + * VMCI_MAX_DATAGRAM_AND_EVENT_QUEUE_SIZE limit. + */ + if (context->datagram_queue_size + vmci_dg_size >= + VMCI_MAX_DATAGRAM_QUEUE_SIZE && + (!vmci_handle_is_equal(dg_src, + vmci_make_handle + (VMCI_HYPERVISOR_CONTEXT_ID, + VMCI_CONTEXT_RESOURCE_ID)) || + context->datagram_queue_size + vmci_dg_size >= + VMCI_MAX_DATAGRAM_AND_EVENT_QUEUE_SIZE)) { + spin_unlock(&context->lock); + vmci_ctx_put(context); + kfree(dq_entry); + pr_devel("Context (ID=0x%x) receive queue is full\n", cid); + return VMCI_ERROR_NO_RESOURCES; + } + + list_add(&dq_entry->list_item, &context->datagram_queue); + context->pending_datagrams++; + context->datagram_queue_size += vmci_dg_size; + ctx_signal_notify(context); + wake_up(&context->host_context.wait_queue); + spin_unlock(&context->lock); + vmci_ctx_put(context); + + return vmci_dg_size; +} + +/* + * Verifies whether a context with the specified context ID exists. + * FIXME: utility is dubious as no decisions can be reliably made + * using this data as context can appear and disappear at any time. + */ +bool vmci_ctx_exists(u32 cid) +{ + struct vmci_ctx *context; + bool exists = false; + + rcu_read_lock(); + + list_for_each_entry_rcu(context, &ctx_list.head, list_item) { + if (context->cid == cid) { + exists = true; + break; + } + } + + rcu_read_unlock(); + return exists; +} + +/* + * Retrieves VMCI context corresponding to the given cid. + */ +struct vmci_ctx *vmci_ctx_get(u32 cid) +{ + struct vmci_ctx *c, *context = NULL; + + if (cid == VMCI_INVALID_ID) + return NULL; + + rcu_read_lock(); + list_for_each_entry_rcu(c, &ctx_list.head, list_item) { + if (c->cid == cid) { + /* + * The context owner drops its own reference to the + * context only after removing it from the list and + * waiting for RCU grace period to expire. This + * means that we are not about to increase the + * reference count of something that is in the + * process of being destroyed. + */ + context = c; + kref_get(&context->kref); + break; + } + } + rcu_read_unlock(); + + return context; +} + +/* + * Deallocates all parts of a context data structure. This + * function doesn't lock the context, because it assumes that + * the caller was holding the last reference to context. + */ +static void ctx_free_ctx(struct kref *kref) +{ + struct vmci_ctx *context = container_of(kref, struct vmci_ctx, kref); + struct vmci_datagram_queue_entry *dq_entry, *dq_entry_tmp; + struct vmci_handle temp_handle; + struct vmci_handle_list *notifier, *tmp; + + /* + * Fire event to all contexts interested in knowing this + * context is dying. + */ + ctx_fire_notification(context->cid, context->priv_flags); + + /* + * Cleanup all queue pair resources attached to context. If + * the VM dies without cleaning up, this code will make sure + * that no resources are leaked. + */ + temp_handle = vmci_handle_arr_get_entry(context->queue_pair_array, 0); + while (!vmci_handle_is_equal(temp_handle, VMCI_INVALID_HANDLE)) { + if (vmci_qp_broker_detach(temp_handle, + context) < VMCI_SUCCESS) { + /* + * When vmci_qp_broker_detach() succeeds it + * removes the handle from the array. If + * detach fails, we must remove the handle + * ourselves. + */ + vmci_handle_arr_remove_entry(context->queue_pair_array, + temp_handle); + } + temp_handle = + vmci_handle_arr_get_entry(context->queue_pair_array, 0); + } + + /* + * It is fine to destroy this without locking the callQueue, as + * this is the only thread having a reference to the context. + */ + list_for_each_entry_safe(dq_entry, dq_entry_tmp, + &context->datagram_queue, list_item) { + WARN_ON(dq_entry->dg_size != VMCI_DG_SIZE(dq_entry->dg)); + list_del(&dq_entry->list_item); + kfree(dq_entry->dg); + kfree(dq_entry); + } + + list_for_each_entry_safe(notifier, tmp, + &context->notifier_list, node) { + list_del(¬ifier->node); + kfree(notifier); + } + + vmci_handle_arr_destroy(context->queue_pair_array); + vmci_handle_arr_destroy(context->doorbell_array); + vmci_handle_arr_destroy(context->pending_doorbell_array); + vmci_ctx_unset_notify(context); + if (context->cred) + put_cred(context->cred); + kfree(context); +} + +/* + * Drops reference to VMCI context. If this is the last reference to + * the context it will be deallocated. A context is created with + * a reference count of one, and on destroy, it is removed from + * the context list before its reference count is decremented. Thus, + * if we reach zero, we are sure that nobody else are about to increment + * it (they need the entry in the context list for that), and so there + * is no need for locking. + */ +void vmci_ctx_put(struct vmci_ctx *context) +{ + kref_put(&context->kref, ctx_free_ctx); +} + +/* + * Dequeues the next datagram and returns it to caller. + * The caller passes in a pointer to the max size datagram + * it can handle and the datagram is only unqueued if the + * size is less than max_size. If larger max_size is set to + * the size of the datagram to give the caller a chance to + * set up a larger buffer for the guestcall. + */ +int vmci_ctx_dequeue_datagram(struct vmci_ctx *context, + size_t *max_size, + struct vmci_datagram **dg) +{ + struct vmci_datagram_queue_entry *dq_entry; + struct list_head *list_item; + int rv; + + /* Dequeue the next datagram entry. */ + spin_lock(&context->lock); + if (context->pending_datagrams == 0) { + ctx_clear_notify_call(context); + spin_unlock(&context->lock); + pr_devel("No datagrams pending\n"); + return VMCI_ERROR_NO_MORE_DATAGRAMS; + } + + list_item = context->datagram_queue.next; + + dq_entry = + list_entry(list_item, struct vmci_datagram_queue_entry, list_item); + + /* Check size of caller's buffer. */ + if (*max_size < dq_entry->dg_size) { + *max_size = dq_entry->dg_size; + spin_unlock(&context->lock); + pr_devel("Caller's buffer should be at least (size=%u bytes)\n", + (u32) *max_size); + return VMCI_ERROR_NO_MEM; + } + + list_del(list_item); + context->pending_datagrams--; + context->datagram_queue_size -= dq_entry->dg_size; + if (context->pending_datagrams == 0) { + ctx_clear_notify_call(context); + rv = VMCI_SUCCESS; + } else { + /* + * Return the size of the next datagram. + */ + struct vmci_datagram_queue_entry *next_entry; + + list_item = context->datagram_queue.next; + next_entry = + list_entry(list_item, struct vmci_datagram_queue_entry, + list_item); + + /* + * The following size_t -> int truncation is fine as + * the maximum size of a (routable) datagram is 68KB. + */ + rv = (int)next_entry->dg_size; + } + spin_unlock(&context->lock); + + /* Caller must free datagram. */ + *dg = dq_entry->dg; + dq_entry->dg = NULL; + kfree(dq_entry); + + return rv; +} + +/* + * Reverts actions set up by vmci_setup_notify(). Unmaps and unlocks the + * page mapped/locked by vmci_setup_notify(). + */ +void vmci_ctx_unset_notify(struct vmci_ctx *context) +{ + struct page *notify_page; + + spin_lock(&context->lock); + + notify_page = context->notify_page; + context->notify = &ctx_dummy_notify; + context->notify_page = NULL; + + spin_unlock(&context->lock); + + if (notify_page) { + kunmap(notify_page); + put_page(notify_page); + } +} + +/* + * Add remote_cid to list of contexts current contexts wants + * notifications from/about. + */ +int vmci_ctx_add_notification(u32 context_id, u32 remote_cid) +{ + struct vmci_ctx *context; + struct vmci_handle_list *notifier, *n; + int result; + bool exists = false; + + context = vmci_ctx_get(context_id); + if (!context) + return VMCI_ERROR_NOT_FOUND; + + if (VMCI_CONTEXT_IS_VM(context_id) && VMCI_CONTEXT_IS_VM(remote_cid)) { + pr_devel("Context removed notifications for other VMs not supported (src=0x%x, remote=0x%x)\n", + context_id, remote_cid); + result = VMCI_ERROR_DST_UNREACHABLE; + goto out; + } + + if (context->priv_flags & VMCI_PRIVILEGE_FLAG_RESTRICTED) { + result = VMCI_ERROR_NO_ACCESS; + goto out; + } + + notifier = kmalloc(sizeof(struct vmci_handle_list), GFP_KERNEL); + if (!notifier) { + result = VMCI_ERROR_NO_MEM; + goto out; + } + + INIT_LIST_HEAD(¬ifier->node); + notifier->handle = vmci_make_handle(remote_cid, VMCI_EVENT_HANDLER); + + spin_lock(&context->lock); + + list_for_each_entry(n, &context->notifier_list, node) { + if (vmci_handle_is_equal(n->handle, notifier->handle)) { + exists = true; + break; + } + } + + if (exists) { + kfree(notifier); + result = VMCI_ERROR_ALREADY_EXISTS; + } else { + list_add_tail_rcu(¬ifier->node, &context->notifier_list); + context->n_notifiers++; + result = VMCI_SUCCESS; + } + + spin_unlock(&context->lock); + + out: + vmci_ctx_put(context); + return result; +} + +/* + * Remove remote_cid from current context's list of contexts it is + * interested in getting notifications from/about. + */ +int vmci_ctx_remove_notification(u32 context_id, u32 remote_cid) +{ + struct vmci_ctx *context; + struct vmci_handle_list *notifier, *tmp; + struct vmci_handle handle; + bool found = false; + + context = vmci_ctx_get(context_id); + if (!context) + return VMCI_ERROR_NOT_FOUND; + + handle = vmci_make_handle(remote_cid, VMCI_EVENT_HANDLER); + + spin_lock(&context->lock); + list_for_each_entry_safe(notifier, tmp, + &context->notifier_list, node) { + if (vmci_handle_is_equal(notifier->handle, handle)) { + list_del_rcu(¬ifier->node); + context->n_notifiers--; + found = true; + break; + } + } + spin_unlock(&context->lock); + + if (found) { + synchronize_rcu(); + kfree(notifier); + } + + vmci_ctx_put(context); + + return found ? VMCI_SUCCESS : VMCI_ERROR_NOT_FOUND; +} + +static int vmci_ctx_get_chkpt_notifiers(struct vmci_ctx *context, + u32 *buf_size, void **pbuf) +{ + u32 *notifiers; + size_t data_size; + struct vmci_handle_list *entry; + int i = 0; + + if (context->n_notifiers == 0) { + *buf_size = 0; + *pbuf = NULL; + return VMCI_SUCCESS; + } + + data_size = context->n_notifiers * sizeof(*notifiers); + if (*buf_size < data_size) { + *buf_size = data_size; + return VMCI_ERROR_MORE_DATA; + } + + notifiers = kmalloc(data_size, GFP_ATOMIC); /* FIXME: want GFP_KERNEL */ + if (!notifiers) + return VMCI_ERROR_NO_MEM; + + list_for_each_entry(entry, &context->notifier_list, node) + notifiers[i++] = entry->handle.context; + + *buf_size = data_size; + *pbuf = notifiers; + return VMCI_SUCCESS; +} + +static int vmci_ctx_get_chkpt_doorbells(struct vmci_ctx *context, + u32 *buf_size, void **pbuf) +{ + struct dbell_cpt_state *dbells; + size_t n_doorbells; + int i; + + n_doorbells = vmci_handle_arr_get_size(context->doorbell_array); + if (n_doorbells > 0) { + size_t data_size = n_doorbells * sizeof(*dbells); + if (*buf_size < data_size) { + *buf_size = data_size; + return VMCI_ERROR_MORE_DATA; + } + + dbells = kmalloc(data_size, GFP_ATOMIC); + if (!dbells) + return VMCI_ERROR_NO_MEM; + + for (i = 0; i < n_doorbells; i++) + dbells[i].handle = vmci_handle_arr_get_entry( + context->doorbell_array, i); + + *buf_size = data_size; + *pbuf = dbells; + } else { + *buf_size = 0; + *pbuf = NULL; + } + + return VMCI_SUCCESS; +} + +/* + * Get current context's checkpoint state of given type. + */ +int vmci_ctx_get_chkpt_state(u32 context_id, + u32 cpt_type, + u32 *buf_size, + void **pbuf) +{ + struct vmci_ctx *context; + int result; + + context = vmci_ctx_get(context_id); + if (!context) + return VMCI_ERROR_NOT_FOUND; + + spin_lock(&context->lock); + + switch (cpt_type) { + case VMCI_NOTIFICATION_CPT_STATE: + result = vmci_ctx_get_chkpt_notifiers(context, buf_size, pbuf); + break; + + case VMCI_WELLKNOWN_CPT_STATE: + /* + * For compatibility with VMX'en with VM to VM communication, we + * always return zero wellknown handles. + */ + + *buf_size = 0; + *pbuf = NULL; + result = VMCI_SUCCESS; + break; + + case VMCI_DOORBELL_CPT_STATE: + result = vmci_ctx_get_chkpt_doorbells(context, buf_size, pbuf); + break; + + default: + pr_devel("Invalid cpt state (type=%d)\n", cpt_type); + result = VMCI_ERROR_INVALID_ARGS; + break; + } + + spin_unlock(&context->lock); + vmci_ctx_put(context); + + return result; +} + +/* + * Set current context's checkpoint state of given type. + */ +int vmci_ctx_set_chkpt_state(u32 context_id, + u32 cpt_type, + u32 buf_size, + void *cpt_buf) +{ + u32 i; + u32 current_id; + int result = VMCI_SUCCESS; + u32 num_ids = buf_size / sizeof(u32); + + if (cpt_type == VMCI_WELLKNOWN_CPT_STATE && num_ids > 0) { + /* + * We would end up here if VMX with VM to VM communication + * attempts to restore a checkpoint with wellknown handles. + */ + pr_warn("Attempt to restore checkpoint with obsolete wellknown handles\n"); + return VMCI_ERROR_OBSOLETE; + } + + if (cpt_type != VMCI_NOTIFICATION_CPT_STATE) { + pr_devel("Invalid cpt state (type=%d)\n", cpt_type); + return VMCI_ERROR_INVALID_ARGS; + } + + for (i = 0; i < num_ids && result == VMCI_SUCCESS; i++) { + current_id = ((u32 *)cpt_buf)[i]; + result = vmci_ctx_add_notification(context_id, current_id); + if (result != VMCI_SUCCESS) + break; + } + if (result != VMCI_SUCCESS) + pr_devel("Failed to set cpt state (type=%d) (error=%d)\n", + cpt_type, result); + + return result; +} + +/* + * Retrieves the specified context's pending notifications in the + * form of a handle array. The handle arrays returned are the + * actual data - not a copy and should not be modified by the + * caller. They must be released using + * vmci_ctx_rcv_notifications_release. + */ +int vmci_ctx_rcv_notifications_get(u32 context_id, + struct vmci_handle_arr **db_handle_array, + struct vmci_handle_arr **qp_handle_array) +{ + struct vmci_ctx *context; + int result = VMCI_SUCCESS; + + context = vmci_ctx_get(context_id); + if (context == NULL) + return VMCI_ERROR_NOT_FOUND; + + spin_lock(&context->lock); + + *db_handle_array = context->pending_doorbell_array; + context->pending_doorbell_array = vmci_handle_arr_create(0); + if (!context->pending_doorbell_array) { + context->pending_doorbell_array = *db_handle_array; + *db_handle_array = NULL; + result = VMCI_ERROR_NO_MEM; + } + *qp_handle_array = NULL; + + spin_unlock(&context->lock); + vmci_ctx_put(context); + + return result; +} + +/* + * Releases handle arrays with pending notifications previously + * retrieved using vmci_ctx_rcv_notifications_get. If the + * notifications were not successfully handed over to the guest, + * success must be false. + */ +void vmci_ctx_rcv_notifications_release(u32 context_id, + struct vmci_handle_arr *db_handle_array, + struct vmci_handle_arr *qp_handle_array, + bool success) +{ + struct vmci_ctx *context = vmci_ctx_get(context_id); + + spin_lock(&context->lock); + if (!success) { + struct vmci_handle handle; + + /* + * New notifications may have been added while we were not + * holding the context lock, so we transfer any new pending + * doorbell notifications to the old array, and reinstate the + * old array. + */ + + handle = vmci_handle_arr_remove_tail( + context->pending_doorbell_array); + while (!vmci_handle_is_invalid(handle)) { + if (!vmci_handle_arr_has_entry(db_handle_array, + handle)) { + vmci_handle_arr_append_entry( + &db_handle_array, handle); + } + handle = vmci_handle_arr_remove_tail( + context->pending_doorbell_array); + } + vmci_handle_arr_destroy(context->pending_doorbell_array); + context->pending_doorbell_array = db_handle_array; + db_handle_array = NULL; + } else { + ctx_clear_notify_call(context); + } + spin_unlock(&context->lock); + vmci_ctx_put(context); + + if (db_handle_array) + vmci_handle_arr_destroy(db_handle_array); + + if (qp_handle_array) + vmci_handle_arr_destroy(qp_handle_array); +} + +/* + * Registers that a new doorbell handle has been allocated by the + * context. Only doorbell handles registered can be notified. + */ +int vmci_ctx_dbell_create(u32 context_id, struct vmci_handle handle) +{ + struct vmci_ctx *context; + int result; + + if (context_id == VMCI_INVALID_ID || vmci_handle_is_invalid(handle)) + return VMCI_ERROR_INVALID_ARGS; + + context = vmci_ctx_get(context_id); + if (context == NULL) + return VMCI_ERROR_NOT_FOUND; + + spin_lock(&context->lock); + if (!vmci_handle_arr_has_entry(context->doorbell_array, handle)) { + vmci_handle_arr_append_entry(&context->doorbell_array, handle); + result = VMCI_SUCCESS; + } else { + result = VMCI_ERROR_DUPLICATE_ENTRY; + } + + spin_unlock(&context->lock); + vmci_ctx_put(context); + + return result; +} + +/* + * Unregisters a doorbell handle that was previously registered + * with vmci_ctx_dbell_create. + */ +int vmci_ctx_dbell_destroy(u32 context_id, struct vmci_handle handle) +{ + struct vmci_ctx *context; + struct vmci_handle removed_handle; + + if (context_id == VMCI_INVALID_ID || vmci_handle_is_invalid(handle)) + return VMCI_ERROR_INVALID_ARGS; + + context = vmci_ctx_get(context_id); + if (context == NULL) + return VMCI_ERROR_NOT_FOUND; + + spin_lock(&context->lock); + removed_handle = + vmci_handle_arr_remove_entry(context->doorbell_array, handle); + vmci_handle_arr_remove_entry(context->pending_doorbell_array, handle); + spin_unlock(&context->lock); + + vmci_ctx_put(context); + + return vmci_handle_is_invalid(removed_handle) ? + VMCI_ERROR_NOT_FOUND : VMCI_SUCCESS; +} + +/* + * Unregisters all doorbell handles that were previously + * registered with vmci_ctx_dbell_create. + */ +int vmci_ctx_dbell_destroy_all(u32 context_id) +{ + struct vmci_ctx *context; + struct vmci_handle handle; + + if (context_id == VMCI_INVALID_ID) + return VMCI_ERROR_INVALID_ARGS; + + context = vmci_ctx_get(context_id); + if (context == NULL) + return VMCI_ERROR_NOT_FOUND; + + spin_lock(&context->lock); + do { + struct vmci_handle_arr *arr = context->doorbell_array; + handle = vmci_handle_arr_remove_tail(arr); + } while (!vmci_handle_is_invalid(handle)); + do { + struct vmci_handle_arr *arr = context->pending_doorbell_array; + handle = vmci_handle_arr_remove_tail(arr); + } while (!vmci_handle_is_invalid(handle)); + spin_unlock(&context->lock); + + vmci_ctx_put(context); + + return VMCI_SUCCESS; +} + +/* + * Registers a notification of a doorbell handle initiated by the + * specified source context. The notification of doorbells are + * subject to the same isolation rules as datagram delivery. To + * allow host side senders of notifications a finer granularity + * of sender rights than those assigned to the sending context + * itself, the host context is required to specify a different + * set of privilege flags that will override the privileges of + * the source context. + */ +int vmci_ctx_notify_dbell(u32 src_cid, + struct vmci_handle handle, + u32 src_priv_flags) +{ + struct vmci_ctx *dst_context; + int result; + + if (vmci_handle_is_invalid(handle)) + return VMCI_ERROR_INVALID_ARGS; + + /* Get the target VM's VMCI context. */ + dst_context = vmci_ctx_get(handle.context); + if (!dst_context) { + pr_devel("Invalid context (ID=0x%x)\n", handle.context); + return VMCI_ERROR_NOT_FOUND; + } + + if (src_cid != handle.context) { + u32 dst_priv_flags; + + if (VMCI_CONTEXT_IS_VM(src_cid) && + VMCI_CONTEXT_IS_VM(handle.context)) { + pr_devel("Doorbell notification from VM to VM not supported (src=0x%x, dst=0x%x)\n", + src_cid, handle.context); + result = VMCI_ERROR_DST_UNREACHABLE; + goto out; + } + + result = vmci_dbell_get_priv_flags(handle, &dst_priv_flags); + if (result < VMCI_SUCCESS) { + pr_warn("Failed to get privilege flags for destination (handle=0x%x:0x%x)\n", + handle.context, handle.resource); + goto out; + } + + if (src_cid != VMCI_HOST_CONTEXT_ID || + src_priv_flags == VMCI_NO_PRIVILEGE_FLAGS) { + src_priv_flags = vmci_context_get_priv_flags(src_cid); + } + + if (vmci_deny_interaction(src_priv_flags, dst_priv_flags)) { + result = VMCI_ERROR_NO_ACCESS; + goto out; + } + } + + if (handle.context == VMCI_HOST_CONTEXT_ID) { + result = vmci_dbell_host_context_notify(src_cid, handle); + } else { + spin_lock(&dst_context->lock); + + if (!vmci_handle_arr_has_entry(dst_context->doorbell_array, + handle)) { + result = VMCI_ERROR_NOT_FOUND; + } else { + if (!vmci_handle_arr_has_entry( + dst_context->pending_doorbell_array, + handle)) { + vmci_handle_arr_append_entry( + &dst_context->pending_doorbell_array, + handle); + + ctx_signal_notify(dst_context); + wake_up(&dst_context->host_context.wait_queue); + + } + result = VMCI_SUCCESS; + } + spin_unlock(&dst_context->lock); + } + + out: + vmci_ctx_put(dst_context); + + return result; +} + +bool vmci_ctx_supports_host_qp(struct vmci_ctx *context) +{ + return context && context->user_version >= VMCI_VERSION_HOSTQP; +} + +/* + * Registers that a new queue pair handle has been allocated by + * the context. + */ +int vmci_ctx_qp_create(struct vmci_ctx *context, struct vmci_handle handle) +{ + int result; + + if (context == NULL || vmci_handle_is_invalid(handle)) + return VMCI_ERROR_INVALID_ARGS; + + if (!vmci_handle_arr_has_entry(context->queue_pair_array, handle)) { + vmci_handle_arr_append_entry(&context->queue_pair_array, + handle); + result = VMCI_SUCCESS; + } else { + result = VMCI_ERROR_DUPLICATE_ENTRY; + } + + return result; +} + +/* + * Unregisters a queue pair handle that was previously registered + * with vmci_ctx_qp_create. + */ +int vmci_ctx_qp_destroy(struct vmci_ctx *context, struct vmci_handle handle) +{ + struct vmci_handle hndl; + + if (context == NULL || vmci_handle_is_invalid(handle)) + return VMCI_ERROR_INVALID_ARGS; + + hndl = vmci_handle_arr_remove_entry(context->queue_pair_array, handle); + + return vmci_handle_is_invalid(hndl) ? + VMCI_ERROR_NOT_FOUND : VMCI_SUCCESS; +} + +/* + * Determines whether a given queue pair handle is registered + * with the given context. + */ +bool vmci_ctx_qp_exists(struct vmci_ctx *context, struct vmci_handle handle) +{ + if (context == NULL || vmci_handle_is_invalid(handle)) + return false; + + return vmci_handle_arr_has_entry(context->queue_pair_array, handle); +} + +/* + * vmci_context_get_priv_flags() - Retrieve privilege flags. + * @context_id: The context ID of the VMCI context. + * + * Retrieves privilege flags of the given VMCI context ID. + */ +u32 vmci_context_get_priv_flags(u32 context_id) +{ + if (vmci_host_code_active()) { + u32 flags; + struct vmci_ctx *context; + + context = vmci_ctx_get(context_id); + if (!context) + return VMCI_LEAST_PRIVILEGE_FLAGS; + + flags = context->priv_flags; + vmci_ctx_put(context); + return flags; + } + return VMCI_NO_PRIVILEGE_FLAGS; +} +EXPORT_SYMBOL_GPL(vmci_context_get_priv_flags); + +/* + * vmci_is_context_owner() - Determimnes if user is the context owner + * @context_id: The context ID of the VMCI context. + * @uid: The host user id (real kernel value). + * + * Determines whether a given UID is the owner of given VMCI context. + */ +bool vmci_is_context_owner(u32 context_id, kuid_t uid) +{ + bool is_owner = false; + + if (vmci_host_code_active()) { + struct vmci_ctx *context = vmci_ctx_get(context_id); + if (context) { + if (context->cred) + is_owner = uid_eq(context->cred->uid, uid); + vmci_ctx_put(context); + } + } + + return is_owner; +} +EXPORT_SYMBOL_GPL(vmci_is_context_owner); diff --git a/drivers/misc/vmw_vmci/vmci_context.h b/drivers/misc/vmw_vmci/vmci_context.h new file mode 100644 index 000000000000..24a88e68a1e6 --- /dev/null +++ b/drivers/misc/vmw_vmci/vmci_context.h @@ -0,0 +1,182 @@ +/* + * VMware VMCI driver (vmciContext.h) + * + * Copyright (C) 2012 VMware, Inc. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation version 2 and no later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY + * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#ifndef _VMCI_CONTEXT_H_ +#define _VMCI_CONTEXT_H_ + +#include <linux/vmw_vmci_defs.h> +#include <linux/atomic.h> +#include <linux/kref.h> +#include <linux/types.h> +#include <linux/wait.h> + +#include "vmci_handle_array.h" +#include "vmci_datagram.h" + +/* Used to determine what checkpoint state to get and set. */ +enum { + VMCI_NOTIFICATION_CPT_STATE = 1, + VMCI_WELLKNOWN_CPT_STATE = 2, + VMCI_DG_OUT_STATE = 3, + VMCI_DG_IN_STATE = 4, + VMCI_DG_IN_SIZE_STATE = 5, + VMCI_DOORBELL_CPT_STATE = 6, +}; + +/* Host specific struct used for signalling */ +struct vmci_host { + wait_queue_head_t wait_queue; +}; + +struct vmci_handle_list { + struct list_head node; + struct vmci_handle handle; +}; + +struct vmci_ctx { + struct list_head list_item; /* For global VMCI list. */ + u32 cid; + struct kref kref; + struct list_head datagram_queue; /* Head of per VM queue. */ + u32 pending_datagrams; + size_t datagram_queue_size; /* Size of datagram queue in bytes. */ + + /* + * Version of the code that created + * this context; e.g., VMX. + */ + int user_version; + spinlock_t lock; /* Locks callQueue and handle_arrays. */ + + /* + * queue_pairs attached to. The array of + * handles for queue pairs is accessed + * from the code for QP API, and there + * it is protected by the QP lock. It + * is also accessed from the context + * clean up path, which does not + * require a lock. VMCILock is not + * used to protect the QP array field. + */ + struct vmci_handle_arr *queue_pair_array; + + /* Doorbells created by context. */ + struct vmci_handle_arr *doorbell_array; + + /* Doorbells pending for context. */ + struct vmci_handle_arr *pending_doorbell_array; + + /* Contexts current context is subscribing to. */ + struct list_head notifier_list; + unsigned int n_notifiers; + + struct vmci_host host_context; + u32 priv_flags; + + const struct cred *cred; + bool *notify; /* Notify flag pointer - hosted only. */ + struct page *notify_page; /* Page backing the notify UVA. */ +}; + +/* VMCINotifyAddRemoveInfo: Used to add/remove remote context notifications. */ +struct vmci_ctx_info { + u32 remote_cid; + int result; +}; + +/* VMCICptBufInfo: Used to set/get current context's checkpoint state. */ +struct vmci_ctx_chkpt_buf_info { + u64 cpt_buf; + u32 cpt_type; + u32 buf_size; + s32 result; + u32 _pad; +}; + +/* + * VMCINotificationReceiveInfo: Used to recieve pending notifications + * for doorbells and queue pairs. + */ +struct vmci_ctx_notify_recv_info { + u64 db_handle_buf_uva; + u64 db_handle_buf_size; + u64 qp_handle_buf_uva; + u64 qp_handle_buf_size; + s32 result; + u32 _pad; +}; + +/* + * Utilility function that checks whether two entities are allowed + * to interact. If one of them is restricted, the other one must + * be trusted. + */ +static inline bool vmci_deny_interaction(u32 part_one, u32 part_two) +{ + return ((part_one & VMCI_PRIVILEGE_FLAG_RESTRICTED) && + !(part_two & VMCI_PRIVILEGE_FLAG_TRUSTED)) || + ((part_two & VMCI_PRIVILEGE_FLAG_RESTRICTED) && + !(part_one & VMCI_PRIVILEGE_FLAG_TRUSTED)); +} + +struct vmci_ctx *vmci_ctx_create(u32 cid, u32 flags, + uintptr_t event_hnd, int version, + const struct cred *cred); +void vmci_ctx_destroy(struct vmci_ctx *context); + +bool vmci_ctx_supports_host_qp(struct vmci_ctx *context); +int vmci_ctx_enqueue_datagram(u32 cid, struct vmci_datagram *dg); +int vmci_ctx_dequeue_datagram(struct vmci_ctx *context, + size_t *max_size, struct vmci_datagram **dg); +int vmci_ctx_pending_datagrams(u32 cid, u32 *pending); +struct vmci_ctx *vmci_ctx_get(u32 cid); +void vmci_ctx_put(struct vmci_ctx *context); +bool vmci_ctx_exists(u32 cid); + +int vmci_ctx_add_notification(u32 context_id, u32 remote_cid); +int vmci_ctx_remove_notification(u32 context_id, u32 remote_cid); +int vmci_ctx_get_chkpt_state(u32 context_id, u32 cpt_type, + u32 *num_cids, void **cpt_buf_ptr); +int vmci_ctx_set_chkpt_state(u32 context_id, u32 cpt_type, + u32 num_cids, void *cpt_buf); + +int vmci_ctx_qp_create(struct vmci_ctx *context, struct vmci_handle handle); +int vmci_ctx_qp_destroy(struct vmci_ctx *context, struct vmci_handle handle); +bool vmci_ctx_qp_exists(struct vmci_ctx *context, struct vmci_handle handle); + +void vmci_ctx_check_signal_notify(struct vmci_ctx *context); +void vmci_ctx_unset_notify(struct vmci_ctx *context); + +int vmci_ctx_dbell_create(u32 context_id, struct vmci_handle handle); +int vmci_ctx_dbell_destroy(u32 context_id, struct vmci_handle handle); +int vmci_ctx_dbell_destroy_all(u32 context_id); +int vmci_ctx_notify_dbell(u32 cid, struct vmci_handle handle, + u32 src_priv_flags); + +int vmci_ctx_rcv_notifications_get(u32 context_id, struct vmci_handle_arr + **db_handle_array, struct vmci_handle_arr + **qp_handle_array); +void vmci_ctx_rcv_notifications_release(u32 context_id, struct vmci_handle_arr + *db_handle_array, struct vmci_handle_arr + *qp_handle_array, bool success); + +static inline u32 vmci_ctx_get_id(struct vmci_ctx *context) +{ + if (!context) + return VMCI_INVALID_ID; + return context->cid; +} + +#endif /* _VMCI_CONTEXT_H_ */ diff --git a/drivers/misc/vmw_vmci/vmci_datagram.c b/drivers/misc/vmw_vmci/vmci_datagram.c new file mode 100644 index 000000000000..ed5c433cd493 --- /dev/null +++ b/drivers/misc/vmw_vmci/vmci_datagram.c @@ -0,0 +1,500 @@ +/* + * VMware VMCI Driver + * + * Copyright (C) 2012 VMware, Inc. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation version 2 and no later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY + * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#include <linux/vmw_vmci_defs.h> +#include <linux/vmw_vmci_api.h> +#include <linux/module.h> +#include <linux/sched.h> +#include <linux/slab.h> +#include <linux/bug.h> + +#include "vmci_datagram.h" +#include "vmci_resource.h" +#include "vmci_context.h" +#include "vmci_driver.h" +#include "vmci_event.h" +#include "vmci_route.h" + +/* + * struct datagram_entry describes the datagram entity. It is used for datagram + * entities created only on the host. + */ +struct datagram_entry { + struct vmci_resource resource; + u32 flags; + bool run_delayed; + vmci_datagram_recv_cb recv_cb; + void *client_data; + u32 priv_flags; +}; + +struct delayed_datagram_info { + struct datagram_entry *entry; + struct vmci_datagram msg; + struct work_struct work; + bool in_dg_host_queue; +}; + +/* Number of in-flight host->host datagrams */ +static atomic_t delayed_dg_host_queue_size = ATOMIC_INIT(0); + +/* + * Create a datagram entry given a handle pointer. + */ +static int dg_create_handle(u32 resource_id, + u32 flags, + u32 priv_flags, + vmci_datagram_recv_cb recv_cb, + void *client_data, struct vmci_handle *out_handle) +{ + int result; + u32 context_id; + struct vmci_handle handle; + struct datagram_entry *entry; + + if ((flags & VMCI_FLAG_WELLKNOWN_DG_HND) != 0) + return VMCI_ERROR_INVALID_ARGS; + + if ((flags & VMCI_FLAG_ANYCID_DG_HND) != 0) { + context_id = VMCI_INVALID_ID; + } else { + context_id = vmci_get_context_id(); + if (context_id == VMCI_INVALID_ID) + return VMCI_ERROR_NO_RESOURCES; + } + + handle = vmci_make_handle(context_id, resource_id); + + entry = kmalloc(sizeof(*entry), GFP_KERNEL); + if (!entry) { + pr_warn("Failed allocating memory for datagram entry\n"); + return VMCI_ERROR_NO_MEM; + } + + entry->run_delayed = (flags & VMCI_FLAG_DG_DELAYED_CB) ? true : false; + entry->flags = flags; + entry->recv_cb = recv_cb; + entry->client_data = client_data; + entry->priv_flags = priv_flags; + + /* Make datagram resource live. */ + result = vmci_resource_add(&entry->resource, + VMCI_RESOURCE_TYPE_DATAGRAM, + handle); + if (result != VMCI_SUCCESS) { + pr_warn("Failed to add new resource (handle=0x%x:0x%x), error: %d\n", + handle.context, handle.resource, result); + kfree(entry); + return result; + } + + *out_handle = vmci_resource_handle(&entry->resource); + return VMCI_SUCCESS; +} + +/* + * Internal utility function with the same purpose as + * vmci_datagram_get_priv_flags that also takes a context_id. + */ +static int vmci_datagram_get_priv_flags(u32 context_id, + struct vmci_handle handle, + u32 *priv_flags) +{ + if (context_id == VMCI_INVALID_ID) + return VMCI_ERROR_INVALID_ARGS; + + if (context_id == VMCI_HOST_CONTEXT_ID) { + struct datagram_entry *src_entry; + struct vmci_resource *resource; + + resource = vmci_resource_by_handle(handle, + VMCI_RESOURCE_TYPE_DATAGRAM); + if (!resource) + return VMCI_ERROR_INVALID_ARGS; + + src_entry = container_of(resource, struct datagram_entry, + resource); + *priv_flags = src_entry->priv_flags; + vmci_resource_put(resource); + } else if (context_id == VMCI_HYPERVISOR_CONTEXT_ID) + *priv_flags = VMCI_MAX_PRIVILEGE_FLAGS; + else + *priv_flags = vmci_context_get_priv_flags(context_id); + + return VMCI_SUCCESS; +} + +/* + * Calls the specified callback in a delayed context. + */ +static void dg_delayed_dispatch(struct work_struct *work) +{ + struct delayed_datagram_info *dg_info = + container_of(work, struct delayed_datagram_info, work); + + dg_info->entry->recv_cb(dg_info->entry->client_data, &dg_info->msg); + + vmci_resource_put(&dg_info->entry->resource); + + if (dg_info->in_dg_host_queue) + atomic_dec(&delayed_dg_host_queue_size); + + kfree(dg_info); +} + +/* + * Dispatch datagram as a host, to the host, or other vm context. This + * function cannot dispatch to hypervisor context handlers. This should + * have been handled before we get here by vmci_datagram_dispatch. + * Returns number of bytes sent on success, error code otherwise. + */ +static int dg_dispatch_as_host(u32 context_id, struct vmci_datagram *dg) +{ + int retval; + size_t dg_size; + u32 src_priv_flags; + + dg_size = VMCI_DG_SIZE(dg); + + /* Host cannot send to the hypervisor. */ + if (dg->dst.context == VMCI_HYPERVISOR_CONTEXT_ID) + return VMCI_ERROR_DST_UNREACHABLE; + + /* Check that source handle matches sending context. */ + if (dg->src.context != context_id) { + pr_devel("Sender context (ID=0x%x) is not owner of src datagram entry (handle=0x%x:0x%x)\n", + context_id, dg->src.context, dg->src.resource); + return VMCI_ERROR_NO_ACCESS; + } + + /* Get hold of privileges of sending endpoint. */ + retval = vmci_datagram_get_priv_flags(context_id, dg->src, + &src_priv_flags); + if (retval != VMCI_SUCCESS) { + pr_warn("Couldn't get privileges (handle=0x%x:0x%x)\n", + dg->src.context, dg->src.resource); + return retval; + } + + /* Determine if we should route to host or guest destination. */ + if (dg->dst.context == VMCI_HOST_CONTEXT_ID) { + /* Route to host datagram entry. */ + struct datagram_entry *dst_entry; + struct vmci_resource *resource; + + if (dg->src.context == VMCI_HYPERVISOR_CONTEXT_ID && + dg->dst.resource == VMCI_EVENT_HANDLER) { + return vmci_event_dispatch(dg); + } + + resource = vmci_resource_by_handle(dg->dst, + VMCI_RESOURCE_TYPE_DATAGRAM); + if (!resource) { + pr_devel("Sending to invalid destination (handle=0x%x:0x%x)\n", + dg->dst.context, dg->dst.resource); + return VMCI_ERROR_INVALID_RESOURCE; + } + dst_entry = container_of(resource, struct datagram_entry, + resource); + if (vmci_deny_interaction(src_priv_flags, + dst_entry->priv_flags)) { + vmci_resource_put(resource); + return VMCI_ERROR_NO_ACCESS; + } + + /* + * If a VMCI datagram destined for the host is also sent by the + * host, we always run it delayed. This ensures that no locks + * are held when the datagram callback runs. + */ + if (dst_entry->run_delayed || + dg->src.context == VMCI_HOST_CONTEXT_ID) { + struct delayed_datagram_info *dg_info; + + if (atomic_add_return(1, &delayed_dg_host_queue_size) + == VMCI_MAX_DELAYED_DG_HOST_QUEUE_SIZE) { + atomic_dec(&delayed_dg_host_queue_size); + vmci_resource_put(resource); + return VMCI_ERROR_NO_MEM; + } + + dg_info = kmalloc(sizeof(*dg_info) + + (size_t) dg->payload_size, GFP_ATOMIC); + if (!dg_info) { + atomic_dec(&delayed_dg_host_queue_size); + vmci_resource_put(resource); + return VMCI_ERROR_NO_MEM; + } + + dg_info->in_dg_host_queue = true; + dg_info->entry = dst_entry; + memcpy(&dg_info->msg, dg, dg_size); + + INIT_WORK(&dg_info->work, dg_delayed_dispatch); + schedule_work(&dg_info->work); + retval = VMCI_SUCCESS; + + } else { + retval = dst_entry->recv_cb(dst_entry->client_data, dg); + vmci_resource_put(resource); + if (retval < VMCI_SUCCESS) + return retval; + } + } else { + /* Route to destination VM context. */ + struct vmci_datagram *new_dg; + + if (context_id != dg->dst.context) { + if (vmci_deny_interaction(src_priv_flags, + vmci_context_get_priv_flags + (dg->dst.context))) { + return VMCI_ERROR_NO_ACCESS; + } else if (VMCI_CONTEXT_IS_VM(context_id)) { + /* + * If the sending context is a VM, it + * cannot reach another VM. + */ + + pr_devel("Datagram communication between VMs not supported (src=0x%x, dst=0x%x)\n", + context_id, dg->dst.context); + return VMCI_ERROR_DST_UNREACHABLE; + } + } + + /* We make a copy to enqueue. */ + new_dg = kmalloc(dg_size, GFP_KERNEL); + if (new_dg == NULL) + return VMCI_ERROR_NO_MEM; + + memcpy(new_dg, dg, dg_size); + retval = vmci_ctx_enqueue_datagram(dg->dst.context, new_dg); + if (retval < VMCI_SUCCESS) { + kfree(new_dg); + return retval; + } + } + + /* + * We currently truncate the size to signed 32 bits. This doesn't + * matter for this handler as it only support 4Kb messages. + */ + return (int)dg_size; +} + +/* + * Dispatch datagram as a guest, down through the VMX and potentially to + * the host. + * Returns number of bytes sent on success, error code otherwise. + */ +static int dg_dispatch_as_guest(struct vmci_datagram *dg) +{ + int retval; + struct vmci_resource *resource; + + resource = vmci_resource_by_handle(dg->src, + VMCI_RESOURCE_TYPE_DATAGRAM); + if (!resource) + return VMCI_ERROR_NO_HANDLE; + + retval = vmci_send_datagram(dg); + vmci_resource_put(resource); + return retval; +} + +/* + * Dispatch datagram. This will determine the routing for the datagram + * and dispatch it accordingly. + * Returns number of bytes sent on success, error code otherwise. + */ +int vmci_datagram_dispatch(u32 context_id, + struct vmci_datagram *dg, bool from_guest) +{ + int retval; + enum vmci_route route; + + BUILD_BUG_ON(sizeof(struct vmci_datagram) != 24); + + if (VMCI_DG_SIZE(dg) > VMCI_MAX_DG_SIZE) { + pr_devel("Payload (size=%llu bytes) too big to send\n", + (unsigned long long)dg->payload_size); + return VMCI_ERROR_INVALID_ARGS; + } + + retval = vmci_route(&dg->src, &dg->dst, from_guest, &route); + if (retval < VMCI_SUCCESS) { + pr_devel("Failed to route datagram (src=0x%x, dst=0x%x, err=%d)\n", + dg->src.context, dg->dst.context, retval); + return retval; + } + + if (VMCI_ROUTE_AS_HOST == route) { + if (VMCI_INVALID_ID == context_id) + context_id = VMCI_HOST_CONTEXT_ID; + return dg_dispatch_as_host(context_id, dg); + } + + if (VMCI_ROUTE_AS_GUEST == route) + return dg_dispatch_as_guest(dg); + + pr_warn("Unknown route (%d) for datagram\n", route); + return VMCI_ERROR_DST_UNREACHABLE; +} + +/* + * Invoke the handler for the given datagram. This is intended to be + * called only when acting as a guest and receiving a datagram from the + * virtual device. + */ +int vmci_datagram_invoke_guest_handler(struct vmci_datagram *dg) +{ + struct vmci_resource *resource; + struct datagram_entry *dst_entry; + + resource = vmci_resource_by_handle(dg->dst, + VMCI_RESOURCE_TYPE_DATAGRAM); + if (!resource) { + pr_devel("destination (handle=0x%x:0x%x) doesn't exist\n", + dg->dst.context, dg->dst.resource); + return VMCI_ERROR_NO_HANDLE; + } + + dst_entry = container_of(resource, struct datagram_entry, resource); + if (dst_entry->run_delayed) { + struct delayed_datagram_info *dg_info; + + dg_info = kmalloc(sizeof(*dg_info) + (size_t)dg->payload_size, + GFP_ATOMIC); + if (!dg_info) { + vmci_resource_put(resource); + return VMCI_ERROR_NO_MEM; + } + + dg_info->in_dg_host_queue = false; + dg_info->entry = dst_entry; + memcpy(&dg_info->msg, dg, VMCI_DG_SIZE(dg)); + + INIT_WORK(&dg_info->work, dg_delayed_dispatch); + schedule_work(&dg_info->work); + } else { + dst_entry->recv_cb(dst_entry->client_data, dg); + vmci_resource_put(resource); + } + + return VMCI_SUCCESS; +} + +/* + * vmci_datagram_create_handle_priv() - Create host context datagram endpoint + * @resource_id: The resource ID. + * @flags: Datagram Flags. + * @priv_flags: Privilege Flags. + * @recv_cb: Callback when receiving datagrams. + * @client_data: Pointer for a datagram_entry struct + * @out_handle: vmci_handle that is populated as a result of this function. + * + * Creates a host context datagram endpoint and returns a handle to it. + */ +int vmci_datagram_create_handle_priv(u32 resource_id, + u32 flags, + u32 priv_flags, + vmci_datagram_recv_cb recv_cb, + void *client_data, + struct vmci_handle *out_handle) +{ + if (out_handle == NULL) + return VMCI_ERROR_INVALID_ARGS; + + if (recv_cb == NULL) { + pr_devel("Client callback needed when creating datagram\n"); + return VMCI_ERROR_INVALID_ARGS; + } + + if (priv_flags & ~VMCI_PRIVILEGE_ALL_FLAGS) + return VMCI_ERROR_INVALID_ARGS; + + return dg_create_handle(resource_id, flags, priv_flags, recv_cb, + client_data, out_handle); +} +EXPORT_SYMBOL_GPL(vmci_datagram_create_handle_priv); + +/* + * vmci_datagram_create_handle() - Create host context datagram endpoint + * @resource_id: Resource ID. + * @flags: Datagram Flags. + * @recv_cb: Callback when receiving datagrams. + * @client_ata: Pointer for a datagram_entry struct + * @out_handle: vmci_handle that is populated as a result of this function. + * + * Creates a host context datagram endpoint and returns a handle to + * it. Same as vmci_datagram_create_handle_priv without the priviledge + * flags argument. + */ +int vmci_datagram_create_handle(u32 resource_id, + u32 flags, + vmci_datagram_recv_cb recv_cb, + void *client_data, + struct vmci_handle *out_handle) +{ + return vmci_datagram_create_handle_priv( + resource_id, flags, + VMCI_DEFAULT_PROC_PRIVILEGE_FLAGS, + recv_cb, client_data, + out_handle); +} +EXPORT_SYMBOL_GPL(vmci_datagram_create_handle); + +/* + * vmci_datagram_destroy_handle() - Destroys datagram handle + * @handle: vmci_handle to be destroyed and reaped. + * + * Use this function to destroy any datagram handles created by + * vmci_datagram_create_handle{,Priv} functions. + */ +int vmci_datagram_destroy_handle(struct vmci_handle handle) +{ + struct datagram_entry *entry; + struct vmci_resource *resource; + + resource = vmci_resource_by_handle(handle, VMCI_RESOURCE_TYPE_DATAGRAM); + if (!resource) { + pr_devel("Failed to destroy datagram (handle=0x%x:0x%x)\n", + handle.context, handle.resource); + return VMCI_ERROR_NOT_FOUND; + } + + entry = container_of(resource, struct datagram_entry, resource); + + vmci_resource_put(&entry->resource); + vmci_resource_remove(&entry->resource); + kfree(entry); + + return VMCI_SUCCESS; +} +EXPORT_SYMBOL_GPL(vmci_datagram_destroy_handle); + +/* + * vmci_datagram_send() - Send a datagram + * @msg: The datagram to send. + * + * Sends the provided datagram on its merry way. + */ +int vmci_datagram_send(struct vmci_datagram *msg) +{ + if (msg == NULL) + return VMCI_ERROR_INVALID_ARGS; + + return vmci_datagram_dispatch(VMCI_INVALID_ID, msg, false); +} +EXPORT_SYMBOL_GPL(vmci_datagram_send); diff --git a/drivers/misc/vmw_vmci/vmci_datagram.h b/drivers/misc/vmw_vmci/vmci_datagram.h new file mode 100644 index 000000000000..eb4aab7f64ec --- /dev/null +++ b/drivers/misc/vmw_vmci/vmci_datagram.h @@ -0,0 +1,52 @@ +/* + * VMware VMCI Driver + * + * Copyright (C) 2012 VMware, Inc. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation version 2 and no later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY + * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#ifndef _VMCI_DATAGRAM_H_ +#define _VMCI_DATAGRAM_H_ + +#include <linux/types.h> +#include <linux/list.h> + +#include "vmci_context.h" + +#define VMCI_MAX_DELAYED_DG_HOST_QUEUE_SIZE 256 + +/* + * The struct vmci_datagram_queue_entry is a queue header for the in-kernel VMCI + * datagram queues. It is allocated in non-paged memory, as the + * content is accessed while holding a spinlock. The pending datagram + * itself may be allocated from paged memory. We shadow the size of + * the datagram in the non-paged queue entry as this size is used + * while holding the same spinlock as above. + */ +struct vmci_datagram_queue_entry { + struct list_head list_item; /* For queuing. */ + size_t dg_size; /* Size of datagram. */ + struct vmci_datagram *dg; /* Pending datagram. */ +}; + +/* VMCIDatagramSendRecvInfo */ +struct vmci_datagram_snd_rcv_info { + u64 addr; + u32 len; + s32 result; +}; + +/* Datagram API for non-public use. */ +int vmci_datagram_dispatch(u32 context_id, struct vmci_datagram *dg, + bool from_guest); +int vmci_datagram_invoke_guest_handler(struct vmci_datagram *dg); + +#endif /* _VMCI_DATAGRAM_H_ */ diff --git a/drivers/misc/vmw_vmci/vmci_doorbell.c b/drivers/misc/vmw_vmci/vmci_doorbell.c new file mode 100644 index 000000000000..c3e8397f62ed --- /dev/null +++ b/drivers/misc/vmw_vmci/vmci_doorbell.c @@ -0,0 +1,604 @@ +/* + * VMware VMCI Driver + * + * Copyright (C) 2012 VMware, Inc. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation version 2 and no later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY + * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#include <linux/vmw_vmci_defs.h> +#include <linux/vmw_vmci_api.h> +#include <linux/completion.h> +#include <linux/hash.h> +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/module.h> +#include <linux/sched.h> +#include <linux/slab.h> + +#include "vmci_datagram.h" +#include "vmci_doorbell.h" +#include "vmci_resource.h" +#include "vmci_driver.h" +#include "vmci_route.h" + + +#define VMCI_DOORBELL_INDEX_BITS 6 +#define VMCI_DOORBELL_INDEX_TABLE_SIZE (1 << VMCI_DOORBELL_INDEX_BITS) +#define VMCI_DOORBELL_HASH(_idx) hash_32(_idx, VMCI_DOORBELL_INDEX_BITS) + +/* + * DoorbellEntry describes the a doorbell notification handle allocated by the + * host. + */ +struct dbell_entry { + struct vmci_resource resource; + struct hlist_node node; + struct work_struct work; + vmci_callback notify_cb; + void *client_data; + u32 idx; + u32 priv_flags; + bool run_delayed; + atomic_t active; /* Only used by guest personality */ +}; + +/* The VMCI index table keeps track of currently registered doorbells. */ +struct dbell_index_table { + spinlock_t lock; /* Index table lock */ + struct hlist_head entries[VMCI_DOORBELL_INDEX_TABLE_SIZE]; +}; + +static struct dbell_index_table vmci_doorbell_it = { + .lock = __SPIN_LOCK_UNLOCKED(vmci_doorbell_it.lock), +}; + +/* + * The max_notify_idx is one larger than the currently known bitmap index in + * use, and is used to determine how much of the bitmap needs to be scanned. + */ +static u32 max_notify_idx; + +/* + * The notify_idx_count is used for determining whether there are free entries + * within the bitmap (if notify_idx_count + 1 < max_notify_idx). + */ +static u32 notify_idx_count; + +/* + * The last_notify_idx_reserved is used to track the last index handed out - in + * the case where multiple handles share a notification index, we hand out + * indexes round robin based on last_notify_idx_reserved. + */ +static u32 last_notify_idx_reserved; + +/* This is a one entry cache used to by the index allocation. */ +static u32 last_notify_idx_released = PAGE_SIZE; + + +/* + * Utility function that retrieves the privilege flags associated + * with a given doorbell handle. For guest endpoints, the + * privileges are determined by the context ID, but for host + * endpoints privileges are associated with the complete + * handle. Hypervisor endpoints are not yet supported. + */ +int vmci_dbell_get_priv_flags(struct vmci_handle handle, u32 *priv_flags) +{ + if (priv_flags == NULL || handle.context == VMCI_INVALID_ID) + return VMCI_ERROR_INVALID_ARGS; + + if (handle.context == VMCI_HOST_CONTEXT_ID) { + struct dbell_entry *entry; + struct vmci_resource *resource; + + resource = vmci_resource_by_handle(handle, + VMCI_RESOURCE_TYPE_DOORBELL); + if (!resource) + return VMCI_ERROR_NOT_FOUND; + + entry = container_of(resource, struct dbell_entry, resource); + *priv_flags = entry->priv_flags; + vmci_resource_put(resource); + } else if (handle.context == VMCI_HYPERVISOR_CONTEXT_ID) { + /* + * Hypervisor endpoints for notifications are not + * supported (yet). + */ + return VMCI_ERROR_INVALID_ARGS; + } else { + *priv_flags = vmci_context_get_priv_flags(handle.context); + } + + return VMCI_SUCCESS; +} + +/* + * Find doorbell entry by bitmap index. + */ +static struct dbell_entry *dbell_index_table_find(u32 idx) +{ + u32 bucket = VMCI_DOORBELL_HASH(idx); + struct dbell_entry *dbell; + struct hlist_node *node; + + hlist_for_each_entry(dbell, node, &vmci_doorbell_it.entries[bucket], + node) { + if (idx == dbell->idx) + return dbell; + } + + return NULL; +} + +/* + * Add the given entry to the index table. This willi take a reference to the + * entry's resource so that the entry is not deleted before it is removed from + * the * table. + */ +static void dbell_index_table_add(struct dbell_entry *entry) +{ + u32 bucket; + u32 new_notify_idx; + + vmci_resource_get(&entry->resource); + + spin_lock_bh(&vmci_doorbell_it.lock); + + /* + * Below we try to allocate an index in the notification + * bitmap with "not too much" sharing between resources. If we + * use less that the full bitmap, we either add to the end if + * there are no unused flags within the currently used area, + * or we search for unused ones. If we use the full bitmap, we + * allocate the index round robin. + */ + if (max_notify_idx < PAGE_SIZE || notify_idx_count < PAGE_SIZE) { + if (last_notify_idx_released < max_notify_idx && + !dbell_index_table_find(last_notify_idx_released)) { + new_notify_idx = last_notify_idx_released; + last_notify_idx_released = PAGE_SIZE; + } else { + bool reused = false; + new_notify_idx = last_notify_idx_reserved; + if (notify_idx_count + 1 < max_notify_idx) { + do { + if (!dbell_index_table_find + (new_notify_idx)) { + reused = true; + break; + } + new_notify_idx = (new_notify_idx + 1) % + max_notify_idx; + } while (new_notify_idx != + last_notify_idx_released); + } + if (!reused) { + new_notify_idx = max_notify_idx; + max_notify_idx++; + } + } + } else { + new_notify_idx = (last_notify_idx_reserved + 1) % PAGE_SIZE; + } + + last_notify_idx_reserved = new_notify_idx; + notify_idx_count++; + + entry->idx = new_notify_idx; + bucket = VMCI_DOORBELL_HASH(entry->idx); + hlist_add_head(&entry->node, &vmci_doorbell_it.entries[bucket]); + + spin_unlock_bh(&vmci_doorbell_it.lock); +} + +/* + * Remove the given entry from the index table. This will release() the + * entry's resource. + */ +static void dbell_index_table_remove(struct dbell_entry *entry) +{ + spin_lock_bh(&vmci_doorbell_it.lock); + + hlist_del_init(&entry->node); + + notify_idx_count--; + if (entry->idx == max_notify_idx - 1) { + /* + * If we delete an entry with the maximum known + * notification index, we take the opportunity to + * prune the current max. As there might be other + * unused indices immediately below, we lower the + * maximum until we hit an index in use. + */ + while (max_notify_idx > 0 && + !dbell_index_table_find(max_notify_idx - 1)) + max_notify_idx--; + } + + last_notify_idx_released = entry->idx; + + spin_unlock_bh(&vmci_doorbell_it.lock); + + vmci_resource_put(&entry->resource); +} + +/* + * Creates a link between the given doorbell handle and the given + * index in the bitmap in the device backend. A notification state + * is created in hypervisor. + */ +static int dbell_link(struct vmci_handle handle, u32 notify_idx) +{ + struct vmci_doorbell_link_msg link_msg; + + link_msg.hdr.dst = vmci_make_handle(VMCI_HYPERVISOR_CONTEXT_ID, + VMCI_DOORBELL_LINK); + link_msg.hdr.src = VMCI_ANON_SRC_HANDLE; + link_msg.hdr.payload_size = sizeof(link_msg) - VMCI_DG_HEADERSIZE; + link_msg.handle = handle; + link_msg.notify_idx = notify_idx; + + return vmci_send_datagram(&link_msg.hdr); +} + +/* + * Unlinks the given doorbell handle from an index in the bitmap in + * the device backend. The notification state is destroyed in hypervisor. + */ +static int dbell_unlink(struct vmci_handle handle) +{ + struct vmci_doorbell_unlink_msg unlink_msg; + + unlink_msg.hdr.dst = vmci_make_handle(VMCI_HYPERVISOR_CONTEXT_ID, + VMCI_DOORBELL_UNLINK); + unlink_msg.hdr.src = VMCI_ANON_SRC_HANDLE; + unlink_msg.hdr.payload_size = sizeof(unlink_msg) - VMCI_DG_HEADERSIZE; + unlink_msg.handle = handle; + + return vmci_send_datagram(&unlink_msg.hdr); +} + +/* + * Notify another guest or the host. We send a datagram down to the + * host via the hypervisor with the notification info. + */ +static int dbell_notify_as_guest(struct vmci_handle handle, u32 priv_flags) +{ + struct vmci_doorbell_notify_msg notify_msg; + + notify_msg.hdr.dst = vmci_make_handle(VMCI_HYPERVISOR_CONTEXT_ID, + VMCI_DOORBELL_NOTIFY); + notify_msg.hdr.src = VMCI_ANON_SRC_HANDLE; + notify_msg.hdr.payload_size = sizeof(notify_msg) - VMCI_DG_HEADERSIZE; + notify_msg.handle = handle; + + return vmci_send_datagram(¬ify_msg.hdr); +} + +/* + * Calls the specified callback in a delayed context. + */ +static void dbell_delayed_dispatch(struct work_struct *work) +{ + struct dbell_entry *entry = container_of(work, + struct dbell_entry, work); + + entry->notify_cb(entry->client_data); + vmci_resource_put(&entry->resource); +} + +/* + * Dispatches a doorbell notification to the host context. + */ +int vmci_dbell_host_context_notify(u32 src_cid, struct vmci_handle handle) +{ + struct dbell_entry *entry; + struct vmci_resource *resource; + + if (vmci_handle_is_invalid(handle)) { + pr_devel("Notifying an invalid doorbell (handle=0x%x:0x%x)\n", + handle.context, handle.resource); + return VMCI_ERROR_INVALID_ARGS; + } + + resource = vmci_resource_by_handle(handle, + VMCI_RESOURCE_TYPE_DOORBELL); + if (!resource) { + pr_devel("Notifying an unknown doorbell (handle=0x%x:0x%x)\n", + handle.context, handle.resource); + return VMCI_ERROR_NOT_FOUND; + } + + entry = container_of(resource, struct dbell_entry, resource); + if (entry->run_delayed) { + schedule_work(&entry->work); + } else { + entry->notify_cb(entry->client_data); + vmci_resource_put(resource); + } + + return VMCI_SUCCESS; +} + +/* + * Register the notification bitmap with the host. + */ +bool vmci_dbell_register_notification_bitmap(u32 bitmap_ppn) +{ + int result; + struct vmci_notify_bm_set_msg bitmap_set_msg; + + bitmap_set_msg.hdr.dst = vmci_make_handle(VMCI_HYPERVISOR_CONTEXT_ID, + VMCI_SET_NOTIFY_BITMAP); + bitmap_set_msg.hdr.src = VMCI_ANON_SRC_HANDLE; + bitmap_set_msg.hdr.payload_size = sizeof(bitmap_set_msg) - + VMCI_DG_HEADERSIZE; + bitmap_set_msg.bitmap_ppn = bitmap_ppn; + + result = vmci_send_datagram(&bitmap_set_msg.hdr); + if (result != VMCI_SUCCESS) { + pr_devel("Failed to register (PPN=%u) as notification bitmap (error=%d)\n", + bitmap_ppn, result); + return false; + } + return true; +} + +/* + * Executes or schedules the handlers for a given notify index. + */ +static void dbell_fire_entries(u32 notify_idx) +{ + u32 bucket = VMCI_DOORBELL_HASH(notify_idx); + struct dbell_entry *dbell; + struct hlist_node *node; + + spin_lock_bh(&vmci_doorbell_it.lock); + + hlist_for_each_entry(dbell, node, + &vmci_doorbell_it.entries[bucket], node) { + if (dbell->idx == notify_idx && + atomic_read(&dbell->active) == 1) { + if (dbell->run_delayed) { + vmci_resource_get(&dbell->resource); + schedule_work(&dbell->work); + } else { + dbell->notify_cb(dbell->client_data); + } + } + } + + spin_unlock_bh(&vmci_doorbell_it.lock); +} + +/* + * Scans the notification bitmap, collects pending notifications, + * resets the bitmap and invokes appropriate callbacks. + */ +void vmci_dbell_scan_notification_entries(u8 *bitmap) +{ + u32 idx; + + for (idx = 0; idx < max_notify_idx; idx++) { + if (bitmap[idx] & 0x1) { + bitmap[idx] &= ~1; + dbell_fire_entries(idx); + } + } +} + +/* + * vmci_doorbell_create() - Creates a doorbell + * @handle: A handle used to track the resource. Can be invalid. + * @flags: Flag that determines context of callback. + * @priv_flags: Privileges flags. + * @notify_cb: The callback to be ivoked when the doorbell fires. + * @client_data: A parameter to be passed to the callback. + * + * Creates a doorbell with the given callback. If the handle is + * VMCI_INVALID_HANDLE, a free handle will be assigned, if + * possible. The callback can be run immediately (potentially with + * locks held - the default) or delayed (in a kernel thread) by + * specifying the flag VMCI_FLAG_DELAYED_CB. If delayed execution + * is selected, a given callback may not be run if the kernel is + * unable to allocate memory for the delayed execution (highly + * unlikely). + */ +int vmci_doorbell_create(struct vmci_handle *handle, + u32 flags, + u32 priv_flags, + vmci_callback notify_cb, void *client_data) +{ + struct dbell_entry *entry; + struct vmci_handle new_handle; + int result; + + if (!handle || !notify_cb || flags & ~VMCI_FLAG_DELAYED_CB || + priv_flags & ~VMCI_PRIVILEGE_ALL_FLAGS) + return VMCI_ERROR_INVALID_ARGS; + + entry = kmalloc(sizeof(*entry), GFP_KERNEL); + if (entry == NULL) { + pr_warn("Failed allocating memory for datagram entry\n"); + return VMCI_ERROR_NO_MEM; + } + + if (vmci_handle_is_invalid(*handle)) { + u32 context_id = vmci_get_context_id(); + + /* Let resource code allocate a free ID for us */ + new_handle = vmci_make_handle(context_id, VMCI_INVALID_ID); + } else { + bool valid_context = false; + + /* + * Validate the handle. We must do both of the checks below + * because we can be acting as both a host and a guest at the + * same time. We always allow the host context ID, since the + * host functionality is in practice always there with the + * unified driver. + */ + if (handle->context == VMCI_HOST_CONTEXT_ID || + (vmci_guest_code_active() && + vmci_get_context_id() == handle->context)) { + valid_context = true; + } + + if (!valid_context || handle->resource == VMCI_INVALID_ID) { + pr_devel("Invalid argument (handle=0x%x:0x%x)\n", + handle->context, handle->resource); + result = VMCI_ERROR_INVALID_ARGS; + goto free_mem; + } + + new_handle = *handle; + } + + entry->idx = 0; + INIT_HLIST_NODE(&entry->node); + entry->priv_flags = priv_flags; + INIT_WORK(&entry->work, dbell_delayed_dispatch); + entry->run_delayed = flags & VMCI_FLAG_DELAYED_CB; + entry->notify_cb = notify_cb; + entry->client_data = client_data; + atomic_set(&entry->active, 0); + + result = vmci_resource_add(&entry->resource, + VMCI_RESOURCE_TYPE_DOORBELL, + new_handle); + if (result != VMCI_SUCCESS) { + pr_warn("Failed to add new resource (handle=0x%x:0x%x), error: %d\n", + new_handle.context, new_handle.resource, result); + goto free_mem; + } + + new_handle = vmci_resource_handle(&entry->resource); + if (vmci_guest_code_active()) { + dbell_index_table_add(entry); + result = dbell_link(new_handle, entry->idx); + if (VMCI_SUCCESS != result) + goto destroy_resource; + + atomic_set(&entry->active, 1); + } + + *handle = new_handle; + + return result; + + destroy_resource: + dbell_index_table_remove(entry); + vmci_resource_remove(&entry->resource); + free_mem: + kfree(entry); + return result; +} +EXPORT_SYMBOL_GPL(vmci_doorbell_create); + +/* + * vmci_doorbell_destroy() - Destroy a doorbell. + * @handle: The handle tracking the resource. + * + * Destroys a doorbell previously created with vmcii_doorbell_create. This + * operation may block waiting for a callback to finish. + */ +int vmci_doorbell_destroy(struct vmci_handle handle) +{ + struct dbell_entry *entry; + struct vmci_resource *resource; + + if (vmci_handle_is_invalid(handle)) + return VMCI_ERROR_INVALID_ARGS; + + resource = vmci_resource_by_handle(handle, + VMCI_RESOURCE_TYPE_DOORBELL); + if (!resource) { + pr_devel("Failed to destroy doorbell (handle=0x%x:0x%x)\n", + handle.context, handle.resource); + return VMCI_ERROR_NOT_FOUND; + } + + entry = container_of(resource, struct dbell_entry, resource); + + if (vmci_guest_code_active()) { + int result; + + dbell_index_table_remove(entry); + + result = dbell_unlink(handle); + if (VMCI_SUCCESS != result) { + + /* + * The only reason this should fail would be + * an inconsistency between guest and + * hypervisor state, where the guest believes + * it has an active registration whereas the + * hypervisor doesn't. One case where this may + * happen is if a doorbell is unregistered + * following a hibernation at a time where the + * doorbell state hasn't been restored on the + * hypervisor side yet. Since the handle has + * now been removed in the guest, we just + * print a warning and return success. + */ + pr_devel("Unlink of doorbell (handle=0x%x:0x%x) unknown by hypervisor (error=%d)\n", + handle.context, handle.resource, result); + } + } + + /* + * Now remove the resource from the table. It might still be in use + * after this, in a callback or still on the delayed work queue. + */ + vmci_resource_put(&entry->resource); + vmci_resource_remove(&entry->resource); + + kfree(entry); + + return VMCI_SUCCESS; +} +EXPORT_SYMBOL_GPL(vmci_doorbell_destroy); + +/* + * vmci_doorbell_notify() - Ring the doorbell (and hide in the bushes). + * @dst: The handlle identifying the doorbell resource + * @priv_flags: Priviledge flags. + * + * Generates a notification on the doorbell identified by the + * handle. For host side generation of notifications, the caller + * can specify what the privilege of the calling side is. + */ +int vmci_doorbell_notify(struct vmci_handle dst, u32 priv_flags) +{ + int retval; + enum vmci_route route; + struct vmci_handle src; + + if (vmci_handle_is_invalid(dst) || + (priv_flags & ~VMCI_PRIVILEGE_ALL_FLAGS)) + return VMCI_ERROR_INVALID_ARGS; + + src = VMCI_INVALID_HANDLE; + retval = vmci_route(&src, &dst, false, &route); + if (retval < VMCI_SUCCESS) + return retval; + + if (VMCI_ROUTE_AS_HOST == route) + return vmci_ctx_notify_dbell(VMCI_HOST_CONTEXT_ID, + dst, priv_flags); + + if (VMCI_ROUTE_AS_GUEST == route) + return dbell_notify_as_guest(dst, priv_flags); + + pr_warn("Unknown route (%d) for doorbell\n", route); + return VMCI_ERROR_DST_UNREACHABLE; +} +EXPORT_SYMBOL_GPL(vmci_doorbell_notify); diff --git a/drivers/misc/vmw_vmci/vmci_doorbell.h b/drivers/misc/vmw_vmci/vmci_doorbell.h new file mode 100644 index 000000000000..e4c0b17486a5 --- /dev/null +++ b/drivers/misc/vmw_vmci/vmci_doorbell.h @@ -0,0 +1,51 @@ +/* + * VMware VMCI Driver + * + * Copyright (C) 2012 VMware, Inc. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation version 2 and no later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY + * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#ifndef VMCI_DOORBELL_H +#define VMCI_DOORBELL_H + +#include <linux/vmw_vmci_defs.h> +#include <linux/types.h> + +#include "vmci_driver.h" + +/* + * VMCINotifyResourceInfo: Used to create and destroy doorbells, and + * generate a notification for a doorbell or queue pair. + */ +struct vmci_dbell_notify_resource_info { + struct vmci_handle handle; + u16 resource; + u16 action; + s32 result; +}; + +/* + * Structure used for checkpointing the doorbell mappings. It is + * written to the checkpoint as is, so changing this structure will + * break checkpoint compatibility. + */ +struct dbell_cpt_state { + struct vmci_handle handle; + u64 bitmap_idx; +}; + +int vmci_dbell_host_context_notify(u32 src_cid, struct vmci_handle handle); +int vmci_dbell_get_priv_flags(struct vmci_handle handle, u32 *priv_flags); + +bool vmci_dbell_register_notification_bitmap(u32 bitmap_ppn); +void vmci_dbell_scan_notification_entries(u8 *bitmap); + +#endif /* VMCI_DOORBELL_H */ diff --git a/drivers/misc/vmw_vmci/vmci_driver.c b/drivers/misc/vmw_vmci/vmci_driver.c new file mode 100644 index 000000000000..7b3fce2da6c3 --- /dev/null +++ b/drivers/misc/vmw_vmci/vmci_driver.c @@ -0,0 +1,117 @@ +/* + * VMware VMCI Driver + * + * Copyright (C) 2012 VMware, Inc. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation version 2 and no later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY + * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#include <linux/vmw_vmci_defs.h> +#include <linux/vmw_vmci_api.h> +#include <linux/atomic.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> + +#include "vmci_driver.h" +#include "vmci_event.h" + +static bool vmci_disable_host; +module_param_named(disable_host, vmci_disable_host, bool, 0); +MODULE_PARM_DESC(disable_host, + "Disable driver host personality (default=enabled)"); + +static bool vmci_disable_guest; +module_param_named(disable_guest, vmci_disable_guest, bool, 0); +MODULE_PARM_DESC(disable_guest, + "Disable driver guest personality (default=enabled)"); + +static bool vmci_guest_personality_initialized; +static bool vmci_host_personality_initialized; + +/* + * vmci_get_context_id() - Gets the current context ID. + * + * Returns the current context ID. Note that since this is accessed only + * from code running in the host, this always returns the host context ID. + */ +u32 vmci_get_context_id(void) +{ + if (vmci_guest_code_active()) + return vmci_get_vm_context_id(); + else if (vmci_host_code_active()) + return VMCI_HOST_CONTEXT_ID; + + return VMCI_INVALID_ID; +} +EXPORT_SYMBOL_GPL(vmci_get_context_id); + +static int __init vmci_drv_init(void) +{ + int vmci_err; + int error; + + vmci_err = vmci_event_init(); + if (vmci_err < VMCI_SUCCESS) { + pr_err("Failed to initialize VMCIEvent (result=%d)\n", + vmci_err); + return -EINVAL; + } + + if (!vmci_disable_guest) { + error = vmci_guest_init(); + if (error) { + pr_warn("Failed to initialize guest personality (err=%d)\n", + error); + } else { + vmci_guest_personality_initialized = true; + pr_info("Guest personality initialized and is %s\n", + vmci_guest_code_active() ? + "active" : "inactive"); + } + } + + if (!vmci_disable_host) { + error = vmci_host_init(); + if (error) { + pr_warn("Unable to initialize host personality (err=%d)\n", + error); + } else { + vmci_host_personality_initialized = true; + pr_info("Initialized host personality\n"); + } + } + + if (!vmci_guest_personality_initialized && + !vmci_host_personality_initialized) { + vmci_event_exit(); + return -ENODEV; + } + + return 0; +} +module_init(vmci_drv_init); + +static void __exit vmci_drv_exit(void) +{ + if (vmci_guest_personality_initialized) + vmci_guest_exit(); + + if (vmci_host_personality_initialized) + vmci_host_exit(); + + vmci_event_exit(); +} +module_exit(vmci_drv_exit); + +MODULE_AUTHOR("VMware, Inc."); +MODULE_DESCRIPTION("VMware Virtual Machine Communication Interface."); +MODULE_VERSION("1.0.0.0-k"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/misc/vmw_vmci/vmci_driver.h b/drivers/misc/vmw_vmci/vmci_driver.h new file mode 100644 index 000000000000..f69156a1f30c --- /dev/null +++ b/drivers/misc/vmw_vmci/vmci_driver.h @@ -0,0 +1,50 @@ +/* + * VMware VMCI Driver + * + * Copyright (C) 2012 VMware, Inc. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation version 2 and no later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY + * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#ifndef _VMCI_DRIVER_H_ +#define _VMCI_DRIVER_H_ + +#include <linux/vmw_vmci_defs.h> +#include <linux/wait.h> + +#include "vmci_queue_pair.h" +#include "vmci_context.h" + +enum vmci_obj_type { + VMCIOBJ_VMX_VM = 10, + VMCIOBJ_CONTEXT, + VMCIOBJ_SOCKET, + VMCIOBJ_NOT_SET, +}; + +/* For storing VMCI structures in file handles. */ +struct vmci_obj { + void *ptr; + enum vmci_obj_type type; +}; + +u32 vmci_get_context_id(void); +int vmci_send_datagram(struct vmci_datagram *dg); + +int vmci_host_init(void); +void vmci_host_exit(void); +bool vmci_host_code_active(void); + +int vmci_guest_init(void); +void vmci_guest_exit(void); +bool vmci_guest_code_active(void); +u32 vmci_get_vm_context_id(void); + +#endif /* _VMCI_DRIVER_H_ */ diff --git a/drivers/misc/vmw_vmci/vmci_event.c b/drivers/misc/vmw_vmci/vmci_event.c new file mode 100644 index 000000000000..8449516d6ac6 --- /dev/null +++ b/drivers/misc/vmw_vmci/vmci_event.c @@ -0,0 +1,224 @@ +/* + * VMware VMCI Driver + * + * Copyright (C) 2012 VMware, Inc. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation version 2 and no later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY + * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#include <linux/vmw_vmci_defs.h> +#include <linux/vmw_vmci_api.h> +#include <linux/list.h> +#include <linux/module.h> +#include <linux/sched.h> +#include <linux/slab.h> + +#include "vmci_driver.h" +#include "vmci_event.h" + +#define EVENT_MAGIC 0xEABE0000 +#define VMCI_EVENT_MAX_ATTEMPTS 10 + +struct vmci_subscription { + u32 id; + u32 event; + vmci_event_cb callback; + void *callback_data; + struct list_head node; /* on one of subscriber lists */ +}; + +static struct list_head subscriber_array[VMCI_EVENT_MAX]; +static DEFINE_MUTEX(subscriber_mutex); + +int __init vmci_event_init(void) +{ + int i; + + for (i = 0; i < VMCI_EVENT_MAX; i++) + INIT_LIST_HEAD(&subscriber_array[i]); + + return VMCI_SUCCESS; +} + +void vmci_event_exit(void) +{ + int e; + + /* We free all memory at exit. */ + for (e = 0; e < VMCI_EVENT_MAX; e++) { + struct vmci_subscription *cur, *p2; + list_for_each_entry_safe(cur, p2, &subscriber_array[e], node) { + + /* + * We should never get here because all events + * should have been unregistered before we try + * to unload the driver module. + */ + pr_warn("Unexpected free events occurring\n"); + list_del(&cur->node); + kfree(cur); + } + } +} + +/* + * Find entry. Assumes subscriber_mutex is held. + */ +static struct vmci_subscription *event_find(u32 sub_id) +{ + int e; + + for (e = 0; e < VMCI_EVENT_MAX; e++) { + struct vmci_subscription *cur; + list_for_each_entry(cur, &subscriber_array[e], node) { + if (cur->id == sub_id) + return cur; + } + } + return NULL; +} + +/* + * Actually delivers the events to the subscribers. + * The callback function for each subscriber is invoked. + */ +static void event_deliver(struct vmci_event_msg *event_msg) +{ + struct vmci_subscription *cur; + struct list_head *subscriber_list; + + rcu_read_lock(); + subscriber_list = &subscriber_array[event_msg->event_data.event]; + list_for_each_entry_rcu(cur, subscriber_list, node) { + cur->callback(cur->id, &event_msg->event_data, + cur->callback_data); + } + rcu_read_unlock(); +} + +/* + * Dispatcher for the VMCI_EVENT_RECEIVE datagrams. Calls all + * subscribers for given event. + */ +int vmci_event_dispatch(struct vmci_datagram *msg) +{ + struct vmci_event_msg *event_msg = (struct vmci_event_msg *)msg; + + if (msg->payload_size < sizeof(u32) || + msg->payload_size > sizeof(struct vmci_event_data_max)) + return VMCI_ERROR_INVALID_ARGS; + + if (!VMCI_EVENT_VALID(event_msg->event_data.event)) + return VMCI_ERROR_EVENT_UNKNOWN; + + event_deliver(event_msg); + return VMCI_SUCCESS; +} + +/* + * vmci_event_subscribe() - Subscribe to a given event. + * @event: The event to subscribe to. + * @callback: The callback to invoke upon the event. + * @callback_data: Data to pass to the callback. + * @subscription_id: ID used to track subscription. Used with + * vmci_event_unsubscribe() + * + * Subscribes to the provided event. The callback specified will be + * fired from RCU critical section and therefore must not sleep. + */ +int vmci_event_subscribe(u32 event, + vmci_event_cb callback, + void *callback_data, + u32 *new_subscription_id) +{ + struct vmci_subscription *sub; + int attempts; + int retval; + bool have_new_id = false; + + if (!new_subscription_id) { + pr_devel("%s: Invalid subscription (NULL)\n", __func__); + return VMCI_ERROR_INVALID_ARGS; + } + + if (!VMCI_EVENT_VALID(event) || !callback) { + pr_devel("%s: Failed to subscribe to event (type=%d) (callback=%p) (data=%p)\n", + __func__, event, callback, callback_data); + return VMCI_ERROR_INVALID_ARGS; + } + + sub = kzalloc(sizeof(*sub), GFP_KERNEL); + if (!sub) + return VMCI_ERROR_NO_MEM; + + sub->id = VMCI_EVENT_MAX; + sub->event = event; + sub->callback = callback; + sub->callback_data = callback_data; + INIT_LIST_HEAD(&sub->node); + + mutex_lock(&subscriber_mutex); + + /* Creation of a new event is always allowed. */ + for (attempts = 0; attempts < VMCI_EVENT_MAX_ATTEMPTS; attempts++) { + static u32 subscription_id; + /* + * We try to get an id a couple of time before + * claiming we are out of resources. + */ + + /* Test for duplicate id. */ + if (!event_find(++subscription_id)) { + sub->id = subscription_id; + have_new_id = true; + break; + } + } + + if (have_new_id) { + list_add_rcu(&sub->node, &subscriber_array[event]); + retval = VMCI_SUCCESS; + } else { + retval = VMCI_ERROR_NO_RESOURCES; + } + + mutex_unlock(&subscriber_mutex); + + *new_subscription_id = sub->id; + return retval; +} +EXPORT_SYMBOL_GPL(vmci_event_subscribe); + +/* + * vmci_event_unsubscribe() - unsubscribe from an event. + * @sub_id: A subscription ID as provided by vmci_event_subscribe() + * + * Unsubscribe from given event. Removes it from list and frees it. + * Will return callback_data if requested by caller. + */ +int vmci_event_unsubscribe(u32 sub_id) +{ + struct vmci_subscription *s; + + mutex_lock(&subscriber_mutex); + s = event_find(sub_id); + if (s) + list_del_rcu(&s->node); + mutex_unlock(&subscriber_mutex); + + if (!s) + return VMCI_ERROR_NOT_FOUND; + + synchronize_rcu(); + kfree(s); + + return VMCI_SUCCESS; +} +EXPORT_SYMBOL_GPL(vmci_event_unsubscribe); diff --git a/drivers/misc/vmw_vmci/vmci_event.h b/drivers/misc/vmw_vmci/vmci_event.h new file mode 100644 index 000000000000..7df9b1c0a96c --- /dev/null +++ b/drivers/misc/vmw_vmci/vmci_event.h @@ -0,0 +1,25 @@ +/* + * VMware VMCI Driver + * + * Copyright (C) 2012 VMware, Inc. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation version 2 and no later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY + * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#ifndef __VMCI_EVENT_H__ +#define __VMCI_EVENT_H__ + +#include <linux/vmw_vmci_api.h> + +int vmci_event_init(void); +void vmci_event_exit(void); +int vmci_event_dispatch(struct vmci_datagram *msg); + +#endif /*__VMCI_EVENT_H__ */ diff --git a/drivers/misc/vmw_vmci/vmci_guest.c b/drivers/misc/vmw_vmci/vmci_guest.c new file mode 100644 index 000000000000..60c01999f489 --- /dev/null +++ b/drivers/misc/vmw_vmci/vmci_guest.c @@ -0,0 +1,759 @@ +/* + * VMware VMCI Driver + * + * Copyright (C) 2012 VMware, Inc. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation version 2 and no later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY + * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#include <linux/vmw_vmci_defs.h> +#include <linux/vmw_vmci_api.h> +#include <linux/moduleparam.h> +#include <linux/interrupt.h> +#include <linux/highmem.h> +#include <linux/kernel.h> +#include <linux/mm.h> +#include <linux/module.h> +#include <linux/sched.h> +#include <linux/slab.h> +#include <linux/init.h> +#include <linux/pci.h> +#include <linux/smp.h> +#include <linux/io.h> +#include <linux/vmalloc.h> + +#include "vmci_datagram.h" +#include "vmci_doorbell.h" +#include "vmci_context.h" +#include "vmci_driver.h" +#include "vmci_event.h" + +#define PCI_VENDOR_ID_VMWARE 0x15AD +#define PCI_DEVICE_ID_VMWARE_VMCI 0x0740 + +#define VMCI_UTIL_NUM_RESOURCES 1 + +static bool vmci_disable_msi; +module_param_named(disable_msi, vmci_disable_msi, bool, 0); +MODULE_PARM_DESC(disable_msi, "Disable MSI use in driver - (default=0)"); + +static bool vmci_disable_msix; +module_param_named(disable_msix, vmci_disable_msix, bool, 0); +MODULE_PARM_DESC(disable_msix, "Disable MSI-X use in driver - (default=0)"); + +static u32 ctx_update_sub_id = VMCI_INVALID_ID; +static u32 vm_context_id = VMCI_INVALID_ID; + +struct vmci_guest_device { + struct device *dev; /* PCI device we are attached to */ + void __iomem *iobase; + + unsigned int irq; + unsigned int intr_type; + bool exclusive_vectors; + struct msix_entry msix_entries[VMCI_MAX_INTRS]; + + struct tasklet_struct datagram_tasklet; + struct tasklet_struct bm_tasklet; + + void *data_buffer; + void *notification_bitmap; +}; + +/* vmci_dev singleton device and supporting data*/ +static struct vmci_guest_device *vmci_dev_g; +static DEFINE_SPINLOCK(vmci_dev_spinlock); + +static atomic_t vmci_num_guest_devices = ATOMIC_INIT(0); + +bool vmci_guest_code_active(void) +{ + return atomic_read(&vmci_num_guest_devices) != 0; +} + +u32 vmci_get_vm_context_id(void) +{ + if (vm_context_id == VMCI_INVALID_ID) { + struct vmci_datagram get_cid_msg; + get_cid_msg.dst = + vmci_make_handle(VMCI_HYPERVISOR_CONTEXT_ID, + VMCI_GET_CONTEXT_ID); + get_cid_msg.src = VMCI_ANON_SRC_HANDLE; + get_cid_msg.payload_size = 0; + vm_context_id = vmci_send_datagram(&get_cid_msg); + } + return vm_context_id; +} + +/* + * VM to hypervisor call mechanism. We use the standard VMware naming + * convention since shared code is calling this function as well. + */ +int vmci_send_datagram(struct vmci_datagram *dg) +{ + unsigned long flags; + int result; + + /* Check args. */ + if (dg == NULL) + return VMCI_ERROR_INVALID_ARGS; + + /* + * Need to acquire spinlock on the device because the datagram + * data may be spread over multiple pages and the monitor may + * interleave device user rpc calls from multiple + * VCPUs. Acquiring the spinlock precludes that + * possibility. Disabling interrupts to avoid incoming + * datagrams during a "rep out" and possibly landing up in + * this function. + */ + spin_lock_irqsave(&vmci_dev_spinlock, flags); + + if (vmci_dev_g) { + iowrite8_rep(vmci_dev_g->iobase + VMCI_DATA_OUT_ADDR, + dg, VMCI_DG_SIZE(dg)); + result = ioread32(vmci_dev_g->iobase + VMCI_RESULT_LOW_ADDR); + } else { + result = VMCI_ERROR_UNAVAILABLE; + } + + spin_unlock_irqrestore(&vmci_dev_spinlock, flags); + + return result; +} +EXPORT_SYMBOL_GPL(vmci_send_datagram); + +/* + * Gets called with the new context id if updated or resumed. + * Context id. + */ +static void vmci_guest_cid_update(u32 sub_id, + const struct vmci_event_data *event_data, + void *client_data) +{ + const struct vmci_event_payld_ctx *ev_payload = + vmci_event_data_const_payload(event_data); + + if (sub_id != ctx_update_sub_id) { + pr_devel("Invalid subscriber (ID=0x%x)\n", sub_id); + return; + } + + if (!event_data || ev_payload->context_id == VMCI_INVALID_ID) { + pr_devel("Invalid event data\n"); + return; + } + + pr_devel("Updating context from (ID=0x%x) to (ID=0x%x) on event (type=%d)\n", + vm_context_id, ev_payload->context_id, event_data->event); + + vm_context_id = ev_payload->context_id; +} + +/* + * Verify that the host supports the hypercalls we need. If it does not, + * try to find fallback hypercalls and use those instead. Returns + * true if required hypercalls (or fallback hypercalls) are + * supported by the host, false otherwise. + */ +static bool vmci_check_host_caps(struct pci_dev *pdev) +{ + bool result; + struct vmci_resource_query_msg *msg; + u32 msg_size = sizeof(struct vmci_resource_query_hdr) + + VMCI_UTIL_NUM_RESOURCES * sizeof(u32); + struct vmci_datagram *check_msg; + + check_msg = kmalloc(msg_size, GFP_KERNEL); + if (!check_msg) { + dev_err(&pdev->dev, "%s: Insufficient memory\n", __func__); + return false; + } + + check_msg->dst = vmci_make_handle(VMCI_HYPERVISOR_CONTEXT_ID, + VMCI_RESOURCES_QUERY); + check_msg->src = VMCI_ANON_SRC_HANDLE; + check_msg->payload_size = msg_size - VMCI_DG_HEADERSIZE; + msg = (struct vmci_resource_query_msg *)VMCI_DG_PAYLOAD(check_msg); + + msg->num_resources = VMCI_UTIL_NUM_RESOURCES; + msg->resources[0] = VMCI_GET_CONTEXT_ID; + + /* Checks that hyper calls are supported */ + result = vmci_send_datagram(check_msg) == 0x01; + kfree(check_msg); + + dev_dbg(&pdev->dev, "%s: Host capability check: %s\n", + __func__, result ? "PASSED" : "FAILED"); + + /* We need the vector. There are no fallbacks. */ + return result; +} + +/* + * Reads datagrams from the data in port and dispatches them. We + * always start reading datagrams into only the first page of the + * datagram buffer. If the datagrams don't fit into one page, we + * use the maximum datagram buffer size for the remainder of the + * invocation. This is a simple heuristic for not penalizing + * small datagrams. + * + * This function assumes that it has exclusive access to the data + * in port for the duration of the call. + */ +static void vmci_dispatch_dgs(unsigned long data) +{ + struct vmci_guest_device *vmci_dev = (struct vmci_guest_device *)data; + u8 *dg_in_buffer = vmci_dev->data_buffer; + struct vmci_datagram *dg; + size_t dg_in_buffer_size = VMCI_MAX_DG_SIZE; + size_t current_dg_in_buffer_size = PAGE_SIZE; + size_t remaining_bytes; + + BUILD_BUG_ON(VMCI_MAX_DG_SIZE < PAGE_SIZE); + + ioread8_rep(vmci_dev->iobase + VMCI_DATA_IN_ADDR, + vmci_dev->data_buffer, current_dg_in_buffer_size); + dg = (struct vmci_datagram *)dg_in_buffer; + remaining_bytes = current_dg_in_buffer_size; + + while (dg->dst.resource != VMCI_INVALID_ID || + remaining_bytes > PAGE_SIZE) { + unsigned dg_in_size; + + /* + * When the input buffer spans multiple pages, a datagram can + * start on any page boundary in the buffer. + */ + if (dg->dst.resource == VMCI_INVALID_ID) { + dg = (struct vmci_datagram *)roundup( + (uintptr_t)dg + 1, PAGE_SIZE); + remaining_bytes = + (size_t)(dg_in_buffer + + current_dg_in_buffer_size - + (u8 *)dg); + continue; + } + + dg_in_size = VMCI_DG_SIZE_ALIGNED(dg); + + if (dg_in_size <= dg_in_buffer_size) { + int result; + + /* + * If the remaining bytes in the datagram + * buffer doesn't contain the complete + * datagram, we first make sure we have enough + * room for it and then we read the reminder + * of the datagram and possibly any following + * datagrams. + */ + if (dg_in_size > remaining_bytes) { + if (remaining_bytes != + current_dg_in_buffer_size) { + + /* + * We move the partial + * datagram to the front and + * read the reminder of the + * datagram and possibly + * following calls into the + * following bytes. + */ + memmove(dg_in_buffer, dg_in_buffer + + current_dg_in_buffer_size - + remaining_bytes, + remaining_bytes); + dg = (struct vmci_datagram *) + dg_in_buffer; + } + + if (current_dg_in_buffer_size != + dg_in_buffer_size) + current_dg_in_buffer_size = + dg_in_buffer_size; + + ioread8_rep(vmci_dev->iobase + + VMCI_DATA_IN_ADDR, + vmci_dev->data_buffer + + remaining_bytes, + current_dg_in_buffer_size - + remaining_bytes); + } + + /* + * We special case event datagrams from the + * hypervisor. + */ + if (dg->src.context == VMCI_HYPERVISOR_CONTEXT_ID && + dg->dst.resource == VMCI_EVENT_HANDLER) { + result = vmci_event_dispatch(dg); + } else { + result = vmci_datagram_invoke_guest_handler(dg); + } + if (result < VMCI_SUCCESS) + dev_dbg(vmci_dev->dev, + "Datagram with resource (ID=0x%x) failed (err=%d)\n", + dg->dst.resource, result); + + /* On to the next datagram. */ + dg = (struct vmci_datagram *)((u8 *)dg + + dg_in_size); + } else { + size_t bytes_to_skip; + + /* + * Datagram doesn't fit in datagram buffer of maximal + * size. We drop it. + */ + dev_dbg(vmci_dev->dev, + "Failed to receive datagram (size=%u bytes)\n", + dg_in_size); + + bytes_to_skip = dg_in_size - remaining_bytes; + if (current_dg_in_buffer_size != dg_in_buffer_size) + current_dg_in_buffer_size = dg_in_buffer_size; + + for (;;) { + ioread8_rep(vmci_dev->iobase + + VMCI_DATA_IN_ADDR, + vmci_dev->data_buffer, + current_dg_in_buffer_size); + if (bytes_to_skip <= current_dg_in_buffer_size) + break; + + bytes_to_skip -= current_dg_in_buffer_size; + } + dg = (struct vmci_datagram *)(dg_in_buffer + + bytes_to_skip); + } + + remaining_bytes = + (size_t) (dg_in_buffer + current_dg_in_buffer_size - + (u8 *)dg); + + if (remaining_bytes < VMCI_DG_HEADERSIZE) { + /* Get the next batch of datagrams. */ + + ioread8_rep(vmci_dev->iobase + VMCI_DATA_IN_ADDR, + vmci_dev->data_buffer, + current_dg_in_buffer_size); + dg = (struct vmci_datagram *)dg_in_buffer; + remaining_bytes = current_dg_in_buffer_size; + } + } +} + +/* + * Scans the notification bitmap for raised flags, clears them + * and handles the notifications. + */ +static void vmci_process_bitmap(unsigned long data) +{ + struct vmci_guest_device *dev = (struct vmci_guest_device *)data; + + if (!dev->notification_bitmap) { + dev_dbg(dev->dev, "No bitmap present in %s\n", __func__); + return; + } + + vmci_dbell_scan_notification_entries(dev->notification_bitmap); +} + +/* + * Enable MSI-X. Try exclusive vectors first, then shared vectors. + */ +static int vmci_enable_msix(struct pci_dev *pdev, + struct vmci_guest_device *vmci_dev) +{ + int i; + int result; + + for (i = 0; i < VMCI_MAX_INTRS; ++i) { + vmci_dev->msix_entries[i].entry = i; + vmci_dev->msix_entries[i].vector = i; + } + + result = pci_enable_msix(pdev, vmci_dev->msix_entries, VMCI_MAX_INTRS); + if (result == 0) + vmci_dev->exclusive_vectors = true; + else if (result > 0) + result = pci_enable_msix(pdev, vmci_dev->msix_entries, 1); + + return result; +} + +/* + * Interrupt handler for legacy or MSI interrupt, or for first MSI-X + * interrupt (vector VMCI_INTR_DATAGRAM). + */ +static irqreturn_t vmci_interrupt(int irq, void *_dev) +{ + struct vmci_guest_device *dev = _dev; + + /* + * If we are using MSI-X with exclusive vectors then we simply schedule + * the datagram tasklet, since we know the interrupt was meant for us. + * Otherwise we must read the ICR to determine what to do. + */ + + if (dev->intr_type == VMCI_INTR_TYPE_MSIX && dev->exclusive_vectors) { + tasklet_schedule(&dev->datagram_tasklet); + } else { + unsigned int icr; + + /* Acknowledge interrupt and determine what needs doing. */ + icr = ioread32(dev->iobase + VMCI_ICR_ADDR); + if (icr == 0 || icr == ~0) + return IRQ_NONE; + + if (icr & VMCI_ICR_DATAGRAM) { + tasklet_schedule(&dev->datagram_tasklet); + icr &= ~VMCI_ICR_DATAGRAM; + } + + if (icr & VMCI_ICR_NOTIFICATION) { + tasklet_schedule(&dev->bm_tasklet); + icr &= ~VMCI_ICR_NOTIFICATION; + } + + if (icr != 0) + dev_warn(dev->dev, + "Ignoring unknown interrupt cause (%d)\n", + icr); + } + + return IRQ_HANDLED; +} + +/* + * Interrupt handler for MSI-X interrupt vector VMCI_INTR_NOTIFICATION, + * which is for the notification bitmap. Will only get called if we are + * using MSI-X with exclusive vectors. + */ +static irqreturn_t vmci_interrupt_bm(int irq, void *_dev) +{ + struct vmci_guest_device *dev = _dev; + + /* For MSI-X we can just assume it was meant for us. */ + tasklet_schedule(&dev->bm_tasklet); + + return IRQ_HANDLED; +} + +/* + * Most of the initialization at module load time is done here. + */ +static int vmci_guest_probe_device(struct pci_dev *pdev, + const struct pci_device_id *id) +{ + struct vmci_guest_device *vmci_dev; + void __iomem *iobase; + unsigned int capabilities; + unsigned long cmd; + int vmci_err; + int error; + + dev_dbg(&pdev->dev, "Probing for vmci/PCI guest device\n"); + + error = pcim_enable_device(pdev); + if (error) { + dev_err(&pdev->dev, + "Failed to enable VMCI device: %d\n", error); + return error; + } + + error = pcim_iomap_regions(pdev, 1 << 0, KBUILD_MODNAME); + if (error) { + dev_err(&pdev->dev, "Failed to reserve/map IO regions\n"); + return error; + } + + iobase = pcim_iomap_table(pdev)[0]; + + dev_info(&pdev->dev, "Found VMCI PCI device at %#lx, irq %u\n", + (unsigned long)iobase, pdev->irq); + + vmci_dev = devm_kzalloc(&pdev->dev, sizeof(*vmci_dev), GFP_KERNEL); + if (!vmci_dev) { + dev_err(&pdev->dev, + "Can't allocate memory for VMCI device\n"); + return -ENOMEM; + } + + vmci_dev->dev = &pdev->dev; + vmci_dev->intr_type = VMCI_INTR_TYPE_INTX; + vmci_dev->exclusive_vectors = false; + vmci_dev->iobase = iobase; + + tasklet_init(&vmci_dev->datagram_tasklet, + vmci_dispatch_dgs, (unsigned long)vmci_dev); + tasklet_init(&vmci_dev->bm_tasklet, + vmci_process_bitmap, (unsigned long)vmci_dev); + + vmci_dev->data_buffer = vmalloc(VMCI_MAX_DG_SIZE); + if (!vmci_dev->data_buffer) { + dev_err(&pdev->dev, + "Can't allocate memory for datagram buffer\n"); + return -ENOMEM; + } + + pci_set_master(pdev); /* To enable queue_pair functionality. */ + + /* + * Verify that the VMCI Device supports the capabilities that + * we need. If the device is missing capabilities that we would + * like to use, check for fallback capabilities and use those + * instead (so we can run a new VM on old hosts). Fail the load if + * a required capability is missing and there is no fallback. + * + * Right now, we need datagrams. There are no fallbacks. + */ + capabilities = ioread32(vmci_dev->iobase + VMCI_CAPS_ADDR); + if (!(capabilities & VMCI_CAPS_DATAGRAM)) { + dev_err(&pdev->dev, "Device does not support datagrams\n"); + error = -ENXIO; + goto err_free_data_buffer; + } + + /* + * If the hardware supports notifications, we will use that as + * well. + */ + if (capabilities & VMCI_CAPS_NOTIFICATIONS) { + vmci_dev->notification_bitmap = vmalloc(PAGE_SIZE); + if (!vmci_dev->notification_bitmap) { + dev_warn(&pdev->dev, + "Unable to allocate notification bitmap\n"); + } else { + memset(vmci_dev->notification_bitmap, 0, PAGE_SIZE); + capabilities |= VMCI_CAPS_NOTIFICATIONS; + } + } + + dev_info(&pdev->dev, "Using capabilities 0x%x\n", capabilities); + + /* Let the host know which capabilities we intend to use. */ + iowrite32(capabilities, vmci_dev->iobase + VMCI_CAPS_ADDR); + + /* Set up global device so that we can start sending datagrams */ + spin_lock_irq(&vmci_dev_spinlock); + vmci_dev_g = vmci_dev; + spin_unlock_irq(&vmci_dev_spinlock); + + /* + * Register notification bitmap with device if that capability is + * used. + */ + if (capabilities & VMCI_CAPS_NOTIFICATIONS) { + struct page *page = + vmalloc_to_page(vmci_dev->notification_bitmap); + unsigned long bitmap_ppn = page_to_pfn(page); + if (!vmci_dbell_register_notification_bitmap(bitmap_ppn)) { + dev_warn(&pdev->dev, + "VMCI device unable to register notification bitmap with PPN 0x%x\n", + (u32) bitmap_ppn); + goto err_remove_vmci_dev_g; + } + } + + /* Check host capabilities. */ + if (!vmci_check_host_caps(pdev)) + goto err_remove_bitmap; + + /* Enable device. */ + + /* + * We subscribe to the VMCI_EVENT_CTX_ID_UPDATE here so we can + * update the internal context id when needed. + */ + vmci_err = vmci_event_subscribe(VMCI_EVENT_CTX_ID_UPDATE, + vmci_guest_cid_update, NULL, + &ctx_update_sub_id); + if (vmci_err < VMCI_SUCCESS) + dev_warn(&pdev->dev, + "Failed to subscribe to event (type=%d): %d\n", + VMCI_EVENT_CTX_ID_UPDATE, vmci_err); + + /* + * Enable interrupts. Try MSI-X first, then MSI, and then fallback on + * legacy interrupts. + */ + if (!vmci_disable_msix && !vmci_enable_msix(pdev, vmci_dev)) { + vmci_dev->intr_type = VMCI_INTR_TYPE_MSIX; + vmci_dev->irq = vmci_dev->msix_entries[0].vector; + } else if (!vmci_disable_msi && !pci_enable_msi(pdev)) { + vmci_dev->intr_type = VMCI_INTR_TYPE_MSI; + vmci_dev->irq = pdev->irq; + } else { + vmci_dev->intr_type = VMCI_INTR_TYPE_INTX; + vmci_dev->irq = pdev->irq; + } + + /* + * Request IRQ for legacy or MSI interrupts, or for first + * MSI-X vector. + */ + error = request_irq(vmci_dev->irq, vmci_interrupt, IRQF_SHARED, + KBUILD_MODNAME, vmci_dev); + if (error) { + dev_err(&pdev->dev, "Irq %u in use: %d\n", + vmci_dev->irq, error); + goto err_disable_msi; + } + + /* + * For MSI-X with exclusive vectors we need to request an + * interrupt for each vector so that we get a separate + * interrupt handler routine. This allows us to distinguish + * between the vectors. + */ + if (vmci_dev->exclusive_vectors) { + error = request_irq(vmci_dev->msix_entries[1].vector, + vmci_interrupt_bm, 0, KBUILD_MODNAME, + vmci_dev); + if (error) { + dev_err(&pdev->dev, + "Failed to allocate irq %u: %d\n", + vmci_dev->msix_entries[1].vector, error); + goto err_free_irq; + } + } + + dev_dbg(&pdev->dev, "Registered device\n"); + + atomic_inc(&vmci_num_guest_devices); + + /* Enable specific interrupt bits. */ + cmd = VMCI_IMR_DATAGRAM; + if (capabilities & VMCI_CAPS_NOTIFICATIONS) + cmd |= VMCI_IMR_NOTIFICATION; + iowrite32(cmd, vmci_dev->iobase + VMCI_IMR_ADDR); + + /* Enable interrupts. */ + iowrite32(VMCI_CONTROL_INT_ENABLE, + vmci_dev->iobase + VMCI_CONTROL_ADDR); + + pci_set_drvdata(pdev, vmci_dev); + return 0; + +err_free_irq: + free_irq(vmci_dev->irq, &vmci_dev); + tasklet_kill(&vmci_dev->datagram_tasklet); + tasklet_kill(&vmci_dev->bm_tasklet); + +err_disable_msi: + if (vmci_dev->intr_type == VMCI_INTR_TYPE_MSIX) + pci_disable_msix(pdev); + else if (vmci_dev->intr_type == VMCI_INTR_TYPE_MSI) + pci_disable_msi(pdev); + + vmci_err = vmci_event_unsubscribe(ctx_update_sub_id); + if (vmci_err < VMCI_SUCCESS) + dev_warn(&pdev->dev, + "Failed to unsubscribe from event (type=%d) with subscriber (ID=0x%x): %d\n", + VMCI_EVENT_CTX_ID_UPDATE, ctx_update_sub_id, vmci_err); + +err_remove_bitmap: + if (vmci_dev->notification_bitmap) { + iowrite32(VMCI_CONTROL_RESET, + vmci_dev->iobase + VMCI_CONTROL_ADDR); + vfree(vmci_dev->notification_bitmap); + } + +err_remove_vmci_dev_g: + spin_lock_irq(&vmci_dev_spinlock); + vmci_dev_g = NULL; + spin_unlock_irq(&vmci_dev_spinlock); + +err_free_data_buffer: + vfree(vmci_dev->data_buffer); + + /* The rest are managed resources and will be freed by PCI core */ + return error; +} + +static void vmci_guest_remove_device(struct pci_dev *pdev) +{ + struct vmci_guest_device *vmci_dev = pci_get_drvdata(pdev); + int vmci_err; + + dev_dbg(&pdev->dev, "Removing device\n"); + + atomic_dec(&vmci_num_guest_devices); + + vmci_qp_guest_endpoints_exit(); + + vmci_err = vmci_event_unsubscribe(ctx_update_sub_id); + if (vmci_err < VMCI_SUCCESS) + dev_warn(&pdev->dev, + "Failed to unsubscribe from event (type=%d) with subscriber (ID=0x%x): %d\n", + VMCI_EVENT_CTX_ID_UPDATE, ctx_update_sub_id, vmci_err); + + spin_lock_irq(&vmci_dev_spinlock); + vmci_dev_g = NULL; + spin_unlock_irq(&vmci_dev_spinlock); + + dev_dbg(&pdev->dev, "Resetting vmci device\n"); + iowrite32(VMCI_CONTROL_RESET, vmci_dev->iobase + VMCI_CONTROL_ADDR); + + /* + * Free IRQ and then disable MSI/MSI-X as appropriate. For + * MSI-X, we might have multiple vectors, each with their own + * IRQ, which we must free too. + */ + free_irq(vmci_dev->irq, vmci_dev); + if (vmci_dev->intr_type == VMCI_INTR_TYPE_MSIX) { + if (vmci_dev->exclusive_vectors) + free_irq(vmci_dev->msix_entries[1].vector, vmci_dev); + pci_disable_msix(pdev); + } else if (vmci_dev->intr_type == VMCI_INTR_TYPE_MSI) { + pci_disable_msi(pdev); + } + + tasklet_kill(&vmci_dev->datagram_tasklet); + tasklet_kill(&vmci_dev->bm_tasklet); + + if (vmci_dev->notification_bitmap) { + /* + * The device reset above cleared the bitmap state of the + * device, so we can safely free it here. + */ + + vfree(vmci_dev->notification_bitmap); + } + + vfree(vmci_dev->data_buffer); + + /* The rest are managed resources and will be freed by PCI core */ +} + +static DEFINE_PCI_DEVICE_TABLE(vmci_ids) = { + { PCI_DEVICE(PCI_VENDOR_ID_VMWARE, PCI_DEVICE_ID_VMWARE_VMCI), }, + { 0 }, +}; +MODULE_DEVICE_TABLE(pci, vmci_ids); + +static struct pci_driver vmci_guest_driver = { + .name = KBUILD_MODNAME, + .id_table = vmci_ids, + .probe = vmci_guest_probe_device, + .remove = vmci_guest_remove_device, +}; + +int __init vmci_guest_init(void) +{ + return pci_register_driver(&vmci_guest_driver); +} + +void __exit vmci_guest_exit(void) +{ + pci_unregister_driver(&vmci_guest_driver); +} diff --git a/drivers/misc/vmw_vmci/vmci_handle_array.c b/drivers/misc/vmw_vmci/vmci_handle_array.c new file mode 100644 index 000000000000..344973a0fb0a --- /dev/null +++ b/drivers/misc/vmw_vmci/vmci_handle_array.c @@ -0,0 +1,142 @@ +/* + * VMware VMCI Driver + * + * Copyright (C) 2012 VMware, Inc. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation version 2 and no later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY + * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#include <linux/slab.h> +#include "vmci_handle_array.h" + +static size_t handle_arr_calc_size(size_t capacity) +{ + return sizeof(struct vmci_handle_arr) + + capacity * sizeof(struct vmci_handle); +} + +struct vmci_handle_arr *vmci_handle_arr_create(size_t capacity) +{ + struct vmci_handle_arr *array; + + if (capacity == 0) + capacity = VMCI_HANDLE_ARRAY_DEFAULT_SIZE; + + array = kmalloc(handle_arr_calc_size(capacity), GFP_ATOMIC); + if (!array) + return NULL; + + array->capacity = capacity; + array->size = 0; + + return array; +} + +void vmci_handle_arr_destroy(struct vmci_handle_arr *array) +{ + kfree(array); +} + +void vmci_handle_arr_append_entry(struct vmci_handle_arr **array_ptr, + struct vmci_handle handle) +{ + struct vmci_handle_arr *array = *array_ptr; + + if (unlikely(array->size >= array->capacity)) { + /* reallocate. */ + struct vmci_handle_arr *new_array; + size_t new_capacity = array->capacity * VMCI_ARR_CAP_MULT; + size_t new_size = handle_arr_calc_size(new_capacity); + + new_array = krealloc(array, new_size, GFP_ATOMIC); + if (!new_array) + return; + + new_array->capacity = new_capacity; + *array_ptr = array = new_array; + } + + array->entries[array->size] = handle; + array->size++; +} + +/* + * Handle that was removed, VMCI_INVALID_HANDLE if entry not found. + */ +struct vmci_handle vmci_handle_arr_remove_entry(struct vmci_handle_arr *array, + struct vmci_handle entry_handle) +{ + struct vmci_handle handle = VMCI_INVALID_HANDLE; + size_t i; + + for (i = 0; i < array->size; i++) { + if (vmci_handle_is_equal(array->entries[i], entry_handle)) { + handle = array->entries[i]; + array->size--; + array->entries[i] = array->entries[array->size]; + array->entries[array->size] = VMCI_INVALID_HANDLE; + break; + } + } + + return handle; +} + +/* + * Handle that was removed, VMCI_INVALID_HANDLE if array was empty. + */ +struct vmci_handle vmci_handle_arr_remove_tail(struct vmci_handle_arr *array) +{ + struct vmci_handle handle = VMCI_INVALID_HANDLE; + + if (array->size) { + array->size--; + handle = array->entries[array->size]; + array->entries[array->size] = VMCI_INVALID_HANDLE; + } + + return handle; +} + +/* + * Handle at given index, VMCI_INVALID_HANDLE if invalid index. + */ +struct vmci_handle +vmci_handle_arr_get_entry(const struct vmci_handle_arr *array, size_t index) +{ + if (unlikely(index >= array->size)) + return VMCI_INVALID_HANDLE; + + return array->entries[index]; +} + +bool vmci_handle_arr_has_entry(const struct vmci_handle_arr *array, + struct vmci_handle entry_handle) +{ + size_t i; + + for (i = 0; i < array->size; i++) + if (vmci_handle_is_equal(array->entries[i], entry_handle)) + return true; + + return false; +} + +/* + * NULL if the array is empty. Otherwise, a pointer to the array + * of VMCI handles in the handle array. + */ +struct vmci_handle *vmci_handle_arr_get_handles(struct vmci_handle_arr *array) +{ + if (array->size) + return array->entries; + + return NULL; +} diff --git a/drivers/misc/vmw_vmci/vmci_handle_array.h b/drivers/misc/vmw_vmci/vmci_handle_array.h new file mode 100644 index 000000000000..b5f3a7f98cf1 --- /dev/null +++ b/drivers/misc/vmw_vmci/vmci_handle_array.h @@ -0,0 +1,52 @@ +/* + * VMware VMCI Driver + * + * Copyright (C) 2012 VMware, Inc. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation version 2 and no later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY + * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#ifndef _VMCI_HANDLE_ARRAY_H_ +#define _VMCI_HANDLE_ARRAY_H_ + +#include <linux/vmw_vmci_defs.h> +#include <linux/types.h> + +#define VMCI_HANDLE_ARRAY_DEFAULT_SIZE 4 +#define VMCI_ARR_CAP_MULT 2 /* Array capacity multiplier */ + +struct vmci_handle_arr { + size_t capacity; + size_t size; + struct vmci_handle entries[]; +}; + +struct vmci_handle_arr *vmci_handle_arr_create(size_t capacity); +void vmci_handle_arr_destroy(struct vmci_handle_arr *array); +void vmci_handle_arr_append_entry(struct vmci_handle_arr **array_ptr, + struct vmci_handle handle); +struct vmci_handle vmci_handle_arr_remove_entry(struct vmci_handle_arr *array, + struct vmci_handle + entry_handle); +struct vmci_handle vmci_handle_arr_remove_tail(struct vmci_handle_arr *array); +struct vmci_handle +vmci_handle_arr_get_entry(const struct vmci_handle_arr *array, size_t index); +bool vmci_handle_arr_has_entry(const struct vmci_handle_arr *array, + struct vmci_handle entry_handle); +struct vmci_handle *vmci_handle_arr_get_handles(struct vmci_handle_arr *array); + +static inline size_t vmci_handle_arr_get_size( + const struct vmci_handle_arr *array) +{ + return array->size; +} + + +#endif /* _VMCI_HANDLE_ARRAY_H_ */ diff --git a/drivers/misc/vmw_vmci/vmci_host.c b/drivers/misc/vmw_vmci/vmci_host.c new file mode 100644 index 000000000000..d4722b3dc8ec --- /dev/null +++ b/drivers/misc/vmw_vmci/vmci_host.c @@ -0,0 +1,1043 @@ +/* + * VMware VMCI Driver + * + * Copyright (C) 2012 VMware, Inc. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation version 2 and no later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY + * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#include <linux/vmw_vmci_defs.h> +#include <linux/vmw_vmci_api.h> +#include <linux/moduleparam.h> +#include <linux/miscdevice.h> +#include <linux/interrupt.h> +#include <linux/highmem.h> +#include <linux/atomic.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/sched.h> +#include <linux/slab.h> +#include <linux/file.h> +#include <linux/init.h> +#include <linux/poll.h> +#include <linux/pci.h> +#include <linux/smp.h> +#include <linux/fs.h> +#include <linux/io.h> + +#include "vmci_handle_array.h" +#include "vmci_queue_pair.h" +#include "vmci_datagram.h" +#include "vmci_doorbell.h" +#include "vmci_resource.h" +#include "vmci_context.h" +#include "vmci_driver.h" +#include "vmci_event.h" + +#define VMCI_UTIL_NUM_RESOURCES 1 + +enum { + VMCI_NOTIFY_RESOURCE_QUEUE_PAIR = 0, + VMCI_NOTIFY_RESOURCE_DOOR_BELL = 1, +}; + +enum { + VMCI_NOTIFY_RESOURCE_ACTION_NOTIFY = 0, + VMCI_NOTIFY_RESOURCE_ACTION_CREATE = 1, + VMCI_NOTIFY_RESOURCE_ACTION_DESTROY = 2, +}; + +/* + * VMCI driver initialization. This block can also be used to + * pass initial group membership etc. + */ +struct vmci_init_blk { + u32 cid; + u32 flags; +}; + +/* VMCIqueue_pairAllocInfo_VMToVM */ +struct vmci_qp_alloc_info_vmvm { + struct vmci_handle handle; + u32 peer; + u32 flags; + u64 produce_size; + u64 consume_size; + u64 produce_page_file; /* User VA. */ + u64 consume_page_file; /* User VA. */ + u64 produce_page_file_size; /* Size of the file name array. */ + u64 consume_page_file_size; /* Size of the file name array. */ + s32 result; + u32 _pad; +}; + +/* VMCISetNotifyInfo: Used to pass notify flag's address to the host driver. */ +struct vmci_set_notify_info { + u64 notify_uva; + s32 result; + u32 _pad; +}; + +/* + * Per-instance host state + */ +struct vmci_host_dev { + struct vmci_ctx *context; + int user_version; + enum vmci_obj_type ct_type; + struct mutex lock; /* Mutex lock for vmci context access */ +}; + +static struct vmci_ctx *host_context; +static bool vmci_host_device_initialized; +static atomic_t vmci_host_active_users = ATOMIC_INIT(0); + +/* + * Determines whether the VMCI host personality is + * available. Since the core functionality of the host driver is + * always present, all guests could possibly use the host + * personality. However, to minimize the deviation from the + * pre-unified driver state of affairs, we only consider the host + * device active if there is no active guest device or if there + * are VMX'en with active VMCI contexts using the host device. + */ +bool vmci_host_code_active(void) +{ + return vmci_host_device_initialized && + (!vmci_guest_code_active() || + atomic_read(&vmci_host_active_users) > 0); +} + +/* + * Called on open of /dev/vmci. + */ +static int vmci_host_open(struct inode *inode, struct file *filp) +{ + struct vmci_host_dev *vmci_host_dev; + + vmci_host_dev = kzalloc(sizeof(struct vmci_host_dev), GFP_KERNEL); + if (vmci_host_dev == NULL) + return -ENOMEM; + + vmci_host_dev->ct_type = VMCIOBJ_NOT_SET; + mutex_init(&vmci_host_dev->lock); + filp->private_data = vmci_host_dev; + + return 0; +} + +/* + * Called on close of /dev/vmci, most often when the process + * exits. + */ +static int vmci_host_close(struct inode *inode, struct file *filp) +{ + struct vmci_host_dev *vmci_host_dev = filp->private_data; + + if (vmci_host_dev->ct_type == VMCIOBJ_CONTEXT) { + vmci_ctx_destroy(vmci_host_dev->context); + vmci_host_dev->context = NULL; + + /* + * The number of active contexts is used to track whether any + * VMX'en are using the host personality. It is incremented when + * a context is created through the IOCTL_VMCI_INIT_CONTEXT + * ioctl. + */ + atomic_dec(&vmci_host_active_users); + } + vmci_host_dev->ct_type = VMCIOBJ_NOT_SET; + + kfree(vmci_host_dev); + filp->private_data = NULL; + return 0; +} + +/* + * This is used to wake up the VMX when a VMCI call arrives, or + * to wake up select() or poll() at the next clock tick. + */ +static unsigned int vmci_host_poll(struct file *filp, poll_table *wait) +{ + struct vmci_host_dev *vmci_host_dev = filp->private_data; + struct vmci_ctx *context = vmci_host_dev->context; + unsigned int mask = 0; + + if (vmci_host_dev->ct_type == VMCIOBJ_CONTEXT) { + /* Check for VMCI calls to this VM context. */ + if (wait) + poll_wait(filp, &context->host_context.wait_queue, + wait); + + spin_lock(&context->lock); + if (context->pending_datagrams > 0 || + vmci_handle_arr_get_size( + context->pending_doorbell_array) > 0) { + mask = POLLIN; + } + spin_unlock(&context->lock); + } + return mask; +} + +/* + * Copies the handles of a handle array into a user buffer, and + * returns the new length in userBufferSize. If the copy to the + * user buffer fails, the functions still returns VMCI_SUCCESS, + * but retval != 0. + */ +static int drv_cp_harray_to_user(void __user *user_buf_uva, + u64 *user_buf_size, + struct vmci_handle_arr *handle_array, + int *retval) +{ + u32 array_size = 0; + struct vmci_handle *handles; + + if (handle_array) + array_size = vmci_handle_arr_get_size(handle_array); + + if (array_size * sizeof(*handles) > *user_buf_size) + return VMCI_ERROR_MORE_DATA; + + *user_buf_size = array_size * sizeof(*handles); + if (*user_buf_size) + *retval = copy_to_user(user_buf_uva, + vmci_handle_arr_get_handles + (handle_array), *user_buf_size); + + return VMCI_SUCCESS; +} + +/* + * Sets up a given context for notify to work. Calls drv_map_bool_ptr() + * which maps the notify boolean in user VA in kernel space. + */ +static int vmci_host_setup_notify(struct vmci_ctx *context, + unsigned long uva) +{ + struct page *page; + int retval; + + if (context->notify_page) { + pr_devel("%s: Notify mechanism is already set up\n", __func__); + return VMCI_ERROR_DUPLICATE_ENTRY; + } + + /* + * We are using 'bool' internally, but let's make sure we explicit + * about the size. + */ + BUILD_BUG_ON(sizeof(bool) != sizeof(u8)); + if (!access_ok(VERIFY_WRITE, (void __user *)uva, sizeof(u8))) + return VMCI_ERROR_GENERIC; + + /* + * Lock physical page backing a given user VA. + */ + down_read(¤t->mm->mmap_sem); + retval = get_user_pages(current, current->mm, + PAGE_ALIGN(uva), + 1, 1, 0, &page, NULL); + up_read(¤t->mm->mmap_sem); + if (retval != 1) + return VMCI_ERROR_GENERIC; + + /* + * Map the locked page and set up notify pointer. + */ + context->notify = kmap(page) + (uva & (PAGE_SIZE - 1)); + vmci_ctx_check_signal_notify(context); + + return VMCI_SUCCESS; +} + +static int vmci_host_get_version(struct vmci_host_dev *vmci_host_dev, + unsigned int cmd, void __user *uptr) +{ + if (cmd == IOCTL_VMCI_VERSION2) { + int __user *vptr = uptr; + if (get_user(vmci_host_dev->user_version, vptr)) + return -EFAULT; + } + + /* + * The basic logic here is: + * + * If the user sends in a version of 0 tell it our version. + * If the user didn't send in a version, tell it our version. + * If the user sent in an old version, tell it -its- version. + * If the user sent in an newer version, tell it our version. + * + * The rationale behind telling the caller its version is that + * Workstation 6.5 required that VMX and VMCI kernel module were + * version sync'd. All new VMX users will be programmed to + * handle the VMCI kernel module version. + */ + + if (vmci_host_dev->user_version > 0 && + vmci_host_dev->user_version < VMCI_VERSION_HOSTQP) { + return vmci_host_dev->user_version; + } + + return VMCI_VERSION; +} + +#define vmci_ioctl_err(fmt, ...) \ + pr_devel("%s: " fmt, ioctl_name, ##__VA_ARGS__) + +static int vmci_host_do_init_context(struct vmci_host_dev *vmci_host_dev, + const char *ioctl_name, + void __user *uptr) +{ + struct vmci_init_blk init_block; + const struct cred *cred; + int retval; + + if (copy_from_user(&init_block, uptr, sizeof(init_block))) { + vmci_ioctl_err("error reading init block\n"); + return -EFAULT; + } + + mutex_lock(&vmci_host_dev->lock); + + if (vmci_host_dev->ct_type != VMCIOBJ_NOT_SET) { + vmci_ioctl_err("received VMCI init on initialized handle\n"); + retval = -EINVAL; + goto out; + } + + if (init_block.flags & ~VMCI_PRIVILEGE_FLAG_RESTRICTED) { + vmci_ioctl_err("unsupported VMCI restriction flag\n"); + retval = -EINVAL; + goto out; + } + + cred = get_current_cred(); + vmci_host_dev->context = vmci_ctx_create(init_block.cid, + init_block.flags, 0, + vmci_host_dev->user_version, + cred); + put_cred(cred); + if (IS_ERR(vmci_host_dev->context)) { + retval = PTR_ERR(vmci_host_dev->context); + vmci_ioctl_err("error initializing context\n"); + goto out; + } + + /* + * Copy cid to userlevel, we do this to allow the VMX + * to enforce its policy on cid generation. + */ + init_block.cid = vmci_ctx_get_id(vmci_host_dev->context); + if (copy_to_user(uptr, &init_block, sizeof(init_block))) { + vmci_ctx_destroy(vmci_host_dev->context); + vmci_host_dev->context = NULL; + vmci_ioctl_err("error writing init block\n"); + retval = -EFAULT; + goto out; + } + + vmci_host_dev->ct_type = VMCIOBJ_CONTEXT; + atomic_inc(&vmci_host_active_users); + + retval = 0; + +out: + mutex_unlock(&vmci_host_dev->lock); + return retval; +} + +static int vmci_host_do_send_datagram(struct vmci_host_dev *vmci_host_dev, + const char *ioctl_name, + void __user *uptr) +{ + struct vmci_datagram_snd_rcv_info send_info; + struct vmci_datagram *dg = NULL; + u32 cid; + + if (vmci_host_dev->ct_type != VMCIOBJ_CONTEXT) { + vmci_ioctl_err("only valid for contexts\n"); + return -EINVAL; + } + + if (copy_from_user(&send_info, uptr, sizeof(send_info))) + return -EFAULT; + + if (send_info.len > VMCI_MAX_DG_SIZE) { + vmci_ioctl_err("datagram is too big (size=%d)\n", + send_info.len); + return -EINVAL; + } + + if (send_info.len < sizeof(*dg)) { + vmci_ioctl_err("datagram is too small (size=%d)\n", + send_info.len); + return -EINVAL; + } + + dg = kmalloc(send_info.len, GFP_KERNEL); + if (!dg) { + vmci_ioctl_err( + "cannot allocate memory to dispatch datagram\n"); + return -ENOMEM; + } + + if (copy_from_user(dg, (void __user *)(uintptr_t)send_info.addr, + send_info.len)) { + vmci_ioctl_err("error getting datagram\n"); + kfree(dg); + return -EFAULT; + } + + pr_devel("Datagram dst (handle=0x%x:0x%x) src (handle=0x%x:0x%x), payload (size=%llu bytes)\n", + dg->dst.context, dg->dst.resource, + dg->src.context, dg->src.resource, + (unsigned long long)dg->payload_size); + + /* Get source context id. */ + cid = vmci_ctx_get_id(vmci_host_dev->context); + send_info.result = vmci_datagram_dispatch(cid, dg, true); + kfree(dg); + + return copy_to_user(uptr, &send_info, sizeof(send_info)) ? -EFAULT : 0; +} + +static int vmci_host_do_receive_datagram(struct vmci_host_dev *vmci_host_dev, + const char *ioctl_name, + void __user *uptr) +{ + struct vmci_datagram_snd_rcv_info recv_info; + struct vmci_datagram *dg = NULL; + int retval; + size_t size; + + if (vmci_host_dev->ct_type != VMCIOBJ_CONTEXT) { + vmci_ioctl_err("only valid for contexts\n"); + return -EINVAL; + } + + if (copy_from_user(&recv_info, uptr, sizeof(recv_info))) + return -EFAULT; + + size = recv_info.len; + recv_info.result = vmci_ctx_dequeue_datagram(vmci_host_dev->context, + &size, &dg); + + if (recv_info.result >= VMCI_SUCCESS) { + void __user *ubuf = (void __user *)(uintptr_t)recv_info.addr; + retval = copy_to_user(ubuf, dg, VMCI_DG_SIZE(dg)); + kfree(dg); + if (retval != 0) + return -EFAULT; + } + + return copy_to_user(uptr, &recv_info, sizeof(recv_info)) ? -EFAULT : 0; +} + +static int vmci_host_do_alloc_queuepair(struct vmci_host_dev *vmci_host_dev, + const char *ioctl_name, + void __user *uptr) +{ + struct vmci_handle handle; + int vmci_status; + int __user *retptr; + u32 cid; + + if (vmci_host_dev->ct_type != VMCIOBJ_CONTEXT) { + vmci_ioctl_err("only valid for contexts\n"); + return -EINVAL; + } + + cid = vmci_ctx_get_id(vmci_host_dev->context); + + if (vmci_host_dev->user_version < VMCI_VERSION_NOVMVM) { + struct vmci_qp_alloc_info_vmvm alloc_info; + struct vmci_qp_alloc_info_vmvm __user *info = uptr; + + if (copy_from_user(&alloc_info, uptr, sizeof(alloc_info))) + return -EFAULT; + + handle = alloc_info.handle; + retptr = &info->result; + + vmci_status = vmci_qp_broker_alloc(alloc_info.handle, + alloc_info.peer, + alloc_info.flags, + VMCI_NO_PRIVILEGE_FLAGS, + alloc_info.produce_size, + alloc_info.consume_size, + NULL, + vmci_host_dev->context); + + if (vmci_status == VMCI_SUCCESS) + vmci_status = VMCI_SUCCESS_QUEUEPAIR_CREATE; + } else { + struct vmci_qp_alloc_info alloc_info; + struct vmci_qp_alloc_info __user *info = uptr; + struct vmci_qp_page_store page_store; + + if (copy_from_user(&alloc_info, uptr, sizeof(alloc_info))) + return -EFAULT; + + handle = alloc_info.handle; + retptr = &info->result; + + page_store.pages = alloc_info.ppn_va; + page_store.len = alloc_info.num_ppns; + + vmci_status = vmci_qp_broker_alloc(alloc_info.handle, + alloc_info.peer, + alloc_info.flags, + VMCI_NO_PRIVILEGE_FLAGS, + alloc_info.produce_size, + alloc_info.consume_size, + &page_store, + vmci_host_dev->context); + } + + if (put_user(vmci_status, retptr)) { + if (vmci_status >= VMCI_SUCCESS) { + vmci_status = vmci_qp_broker_detach(handle, + vmci_host_dev->context); + } + return -EFAULT; + } + + return 0; +} + +static int vmci_host_do_queuepair_setva(struct vmci_host_dev *vmci_host_dev, + const char *ioctl_name, + void __user *uptr) +{ + struct vmci_qp_set_va_info set_va_info; + struct vmci_qp_set_va_info __user *info = uptr; + s32 result; + + if (vmci_host_dev->ct_type != VMCIOBJ_CONTEXT) { + vmci_ioctl_err("only valid for contexts\n"); + return -EINVAL; + } + + if (vmci_host_dev->user_version < VMCI_VERSION_NOVMVM) { + vmci_ioctl_err("is not allowed\n"); + return -EINVAL; + } + + if (copy_from_user(&set_va_info, uptr, sizeof(set_va_info))) + return -EFAULT; + + if (set_va_info.va) { + /* + * VMX is passing down a new VA for the queue + * pair mapping. + */ + result = vmci_qp_broker_map(set_va_info.handle, + vmci_host_dev->context, + set_va_info.va); + } else { + /* + * The queue pair is about to be unmapped by + * the VMX. + */ + result = vmci_qp_broker_unmap(set_va_info.handle, + vmci_host_dev->context, 0); + } + + return put_user(result, &info->result) ? -EFAULT : 0; +} + +static int vmci_host_do_queuepair_setpf(struct vmci_host_dev *vmci_host_dev, + const char *ioctl_name, + void __user *uptr) +{ + struct vmci_qp_page_file_info page_file_info; + struct vmci_qp_page_file_info __user *info = uptr; + s32 result; + + if (vmci_host_dev->user_version < VMCI_VERSION_HOSTQP || + vmci_host_dev->user_version >= VMCI_VERSION_NOVMVM) { + vmci_ioctl_err("not supported on this VMX (version=%d)\n", + vmci_host_dev->user_version); + return -EINVAL; + } + + if (vmci_host_dev->ct_type != VMCIOBJ_CONTEXT) { + vmci_ioctl_err("only valid for contexts\n"); + return -EINVAL; + } + + if (copy_from_user(&page_file_info, uptr, sizeof(*info))) + return -EFAULT; + + /* + * Communicate success pre-emptively to the caller. Note that the + * basic premise is that it is incumbent upon the caller not to look at + * the info.result field until after the ioctl() returns. And then, + * only if the ioctl() result indicates no error. We send up the + * SUCCESS status before calling SetPageStore() store because failing + * to copy up the result code means unwinding the SetPageStore(). + * + * It turns out the logic to unwind a SetPageStore() opens a can of + * worms. For example, if a host had created the queue_pair and a + * guest attaches and SetPageStore() is successful but writing success + * fails, then ... the host has to be stopped from writing (anymore) + * data into the queue_pair. That means an additional test in the + * VMCI_Enqueue() code path. Ugh. + */ + + if (put_user(VMCI_SUCCESS, &info->result)) { + /* + * In this case, we can't write a result field of the + * caller's info block. So, we don't even try to + * SetPageStore(). + */ + return -EFAULT; + } + + result = vmci_qp_broker_set_page_store(page_file_info.handle, + page_file_info.produce_va, + page_file_info.consume_va, + vmci_host_dev->context); + if (result < VMCI_SUCCESS) { + if (put_user(result, &info->result)) { + /* + * Note that in this case the SetPageStore() + * call failed but we were unable to + * communicate that to the caller (because the + * copy_to_user() call failed). So, if we + * simply return an error (in this case + * -EFAULT) then the caller will know that the + * SetPageStore failed even though we couldn't + * put the result code in the result field and + * indicate exactly why it failed. + * + * That says nothing about the issue where we + * were once able to write to the caller's info + * memory and now can't. Something more + * serious is probably going on than the fact + * that SetPageStore() didn't work. + */ + return -EFAULT; + } + } + + return 0; +} + +static int vmci_host_do_qp_detach(struct vmci_host_dev *vmci_host_dev, + const char *ioctl_name, + void __user *uptr) +{ + struct vmci_qp_dtch_info detach_info; + struct vmci_qp_dtch_info __user *info = uptr; + s32 result; + + if (vmci_host_dev->ct_type != VMCIOBJ_CONTEXT) { + vmci_ioctl_err("only valid for contexts\n"); + return -EINVAL; + } + + if (copy_from_user(&detach_info, uptr, sizeof(detach_info))) + return -EFAULT; + + result = vmci_qp_broker_detach(detach_info.handle, + vmci_host_dev->context); + if (result == VMCI_SUCCESS && + vmci_host_dev->user_version < VMCI_VERSION_NOVMVM) { + result = VMCI_SUCCESS_LAST_DETACH; + } + + return put_user(result, &info->result) ? -EFAULT : 0; +} + +static int vmci_host_do_ctx_add_notify(struct vmci_host_dev *vmci_host_dev, + const char *ioctl_name, + void __user *uptr) +{ + struct vmci_ctx_info ar_info; + struct vmci_ctx_info __user *info = uptr; + s32 result; + u32 cid; + + if (vmci_host_dev->ct_type != VMCIOBJ_CONTEXT) { + vmci_ioctl_err("only valid for contexts\n"); + return -EINVAL; + } + + if (copy_from_user(&ar_info, uptr, sizeof(ar_info))) + return -EFAULT; + + cid = vmci_ctx_get_id(vmci_host_dev->context); + result = vmci_ctx_add_notification(cid, ar_info.remote_cid); + + return put_user(result, &info->result) ? -EFAULT : 0; +} + +static int vmci_host_do_ctx_remove_notify(struct vmci_host_dev *vmci_host_dev, + const char *ioctl_name, + void __user *uptr) +{ + struct vmci_ctx_info ar_info; + struct vmci_ctx_info __user *info = uptr; + u32 cid; + int result; + + if (vmci_host_dev->ct_type != VMCIOBJ_CONTEXT) { + vmci_ioctl_err("only valid for contexts\n"); + return -EINVAL; + } + + if (copy_from_user(&ar_info, uptr, sizeof(ar_info))) + return -EFAULT; + + cid = vmci_ctx_get_id(vmci_host_dev->context); + result = vmci_ctx_remove_notification(cid, + ar_info.remote_cid); + + return put_user(result, &info->result) ? -EFAULT : 0; +} + +static int vmci_host_do_ctx_get_cpt_state(struct vmci_host_dev *vmci_host_dev, + const char *ioctl_name, + void __user *uptr) +{ + struct vmci_ctx_chkpt_buf_info get_info; + u32 cid; + void *cpt_buf; + int retval; + + if (vmci_host_dev->ct_type != VMCIOBJ_CONTEXT) { + vmci_ioctl_err("only valid for contexts\n"); + return -EINVAL; + } + + if (copy_from_user(&get_info, uptr, sizeof(get_info))) + return -EFAULT; + + cid = vmci_ctx_get_id(vmci_host_dev->context); + get_info.result = vmci_ctx_get_chkpt_state(cid, get_info.cpt_type, + &get_info.buf_size, &cpt_buf); + if (get_info.result == VMCI_SUCCESS && get_info.buf_size) { + void __user *ubuf = (void __user *)(uintptr_t)get_info.cpt_buf; + retval = copy_to_user(ubuf, cpt_buf, get_info.buf_size); + kfree(cpt_buf); + + if (retval) + return -EFAULT; + } + + return copy_to_user(uptr, &get_info, sizeof(get_info)) ? -EFAULT : 0; +} + +static int vmci_host_do_ctx_set_cpt_state(struct vmci_host_dev *vmci_host_dev, + const char *ioctl_name, + void __user *uptr) +{ + struct vmci_ctx_chkpt_buf_info set_info; + u32 cid; + void *cpt_buf; + int retval; + + if (vmci_host_dev->ct_type != VMCIOBJ_CONTEXT) { + vmci_ioctl_err("only valid for contexts\n"); + return -EINVAL; + } + + if (copy_from_user(&set_info, uptr, sizeof(set_info))) + return -EFAULT; + + cpt_buf = kmalloc(set_info.buf_size, GFP_KERNEL); + if (!cpt_buf) { + vmci_ioctl_err( + "cannot allocate memory to set cpt state (type=%d)\n", + set_info.cpt_type); + return -ENOMEM; + } + + if (copy_from_user(cpt_buf, (void __user *)(uintptr_t)set_info.cpt_buf, + set_info.buf_size)) { + retval = -EFAULT; + goto out; + } + + cid = vmci_ctx_get_id(vmci_host_dev->context); + set_info.result = vmci_ctx_set_chkpt_state(cid, set_info.cpt_type, + set_info.buf_size, cpt_buf); + + retval = copy_to_user(uptr, &set_info, sizeof(set_info)) ? -EFAULT : 0; + +out: + kfree(cpt_buf); + return retval; +} + +static int vmci_host_do_get_context_id(struct vmci_host_dev *vmci_host_dev, + const char *ioctl_name, + void __user *uptr) +{ + u32 __user *u32ptr = uptr; + + return put_user(VMCI_HOST_CONTEXT_ID, u32ptr) ? -EFAULT : 0; +} + +static int vmci_host_do_set_notify(struct vmci_host_dev *vmci_host_dev, + const char *ioctl_name, + void __user *uptr) +{ + struct vmci_set_notify_info notify_info; + + if (vmci_host_dev->ct_type != VMCIOBJ_CONTEXT) { + vmci_ioctl_err("only valid for contexts\n"); + return -EINVAL; + } + + if (copy_from_user(¬ify_info, uptr, sizeof(notify_info))) + return -EFAULT; + + if (notify_info.notify_uva) { + notify_info.result = + vmci_host_setup_notify(vmci_host_dev->context, + notify_info.notify_uva); + } else { + vmci_ctx_unset_notify(vmci_host_dev->context); + notify_info.result = VMCI_SUCCESS; + } + + return copy_to_user(uptr, ¬ify_info, sizeof(notify_info)) ? + -EFAULT : 0; +} + +static int vmci_host_do_notify_resource(struct vmci_host_dev *vmci_host_dev, + const char *ioctl_name, + void __user *uptr) +{ + struct vmci_dbell_notify_resource_info info; + u32 cid; + + if (vmci_host_dev->user_version < VMCI_VERSION_NOTIFY) { + vmci_ioctl_err("invalid for current VMX versions\n"); + return -EINVAL; + } + + if (vmci_host_dev->ct_type != VMCIOBJ_CONTEXT) { + vmci_ioctl_err("only valid for contexts\n"); + return -EINVAL; + } + + if (copy_from_user(&info, uptr, sizeof(info))) + return -EFAULT; + + cid = vmci_ctx_get_id(vmci_host_dev->context); + + switch (info.action) { + case VMCI_NOTIFY_RESOURCE_ACTION_NOTIFY: + if (info.resource == VMCI_NOTIFY_RESOURCE_DOOR_BELL) { + u32 flags = VMCI_NO_PRIVILEGE_FLAGS; + info.result = vmci_ctx_notify_dbell(cid, info.handle, + flags); + } else { + info.result = VMCI_ERROR_UNAVAILABLE; + } + break; + + case VMCI_NOTIFY_RESOURCE_ACTION_CREATE: + info.result = vmci_ctx_dbell_create(cid, info.handle); + break; + + case VMCI_NOTIFY_RESOURCE_ACTION_DESTROY: + info.result = vmci_ctx_dbell_destroy(cid, info.handle); + break; + + default: + vmci_ioctl_err("got unknown action (action=%d)\n", + info.action); + info.result = VMCI_ERROR_INVALID_ARGS; + } + + return copy_to_user(uptr, &info, sizeof(info)) ? -EFAULT : 0; +} + +static int vmci_host_do_recv_notifications(struct vmci_host_dev *vmci_host_dev, + const char *ioctl_name, + void __user *uptr) +{ + struct vmci_ctx_notify_recv_info info; + struct vmci_handle_arr *db_handle_array; + struct vmci_handle_arr *qp_handle_array; + void __user *ubuf; + u32 cid; + int retval = 0; + + if (vmci_host_dev->ct_type != VMCIOBJ_CONTEXT) { + vmci_ioctl_err("only valid for contexts\n"); + return -EINVAL; + } + + if (vmci_host_dev->user_version < VMCI_VERSION_NOTIFY) { + vmci_ioctl_err("not supported for the current vmx version\n"); + return -EINVAL; + } + + if (copy_from_user(&info, uptr, sizeof(info))) + return -EFAULT; + + if ((info.db_handle_buf_size && !info.db_handle_buf_uva) || + (info.qp_handle_buf_size && !info.qp_handle_buf_uva)) { + return -EINVAL; + } + + cid = vmci_ctx_get_id(vmci_host_dev->context); + + info.result = vmci_ctx_rcv_notifications_get(cid, + &db_handle_array, &qp_handle_array); + if (info.result != VMCI_SUCCESS) + return copy_to_user(uptr, &info, sizeof(info)) ? -EFAULT : 0; + + ubuf = (void __user *)(uintptr_t)info.db_handle_buf_uva; + info.result = drv_cp_harray_to_user(ubuf, &info.db_handle_buf_size, + db_handle_array, &retval); + if (info.result == VMCI_SUCCESS && !retval) { + ubuf = (void __user *)(uintptr_t)info.qp_handle_buf_uva; + info.result = drv_cp_harray_to_user(ubuf, + &info.qp_handle_buf_size, + qp_handle_array, &retval); + } + + if (!retval && copy_to_user(uptr, &info, sizeof(info))) + retval = -EFAULT; + + vmci_ctx_rcv_notifications_release(cid, + db_handle_array, qp_handle_array, + info.result == VMCI_SUCCESS && !retval); + + return retval; +} + +static long vmci_host_unlocked_ioctl(struct file *filp, + unsigned int iocmd, unsigned long ioarg) +{ +#define VMCI_DO_IOCTL(ioctl_name, ioctl_fn) do { \ + char *name = __stringify(IOCTL_VMCI_ ## ioctl_name); \ + return vmci_host_do_ ## ioctl_fn( \ + vmci_host_dev, name, uptr); \ + } while (0) + + struct vmci_host_dev *vmci_host_dev = filp->private_data; + void __user *uptr = (void __user *)ioarg; + + switch (iocmd) { + case IOCTL_VMCI_INIT_CONTEXT: + VMCI_DO_IOCTL(INIT_CONTEXT, init_context); + case IOCTL_VMCI_DATAGRAM_SEND: + VMCI_DO_IOCTL(DATAGRAM_SEND, send_datagram); + case IOCTL_VMCI_DATAGRAM_RECEIVE: + VMCI_DO_IOCTL(DATAGRAM_RECEIVE, receive_datagram); + case IOCTL_VMCI_QUEUEPAIR_ALLOC: + VMCI_DO_IOCTL(QUEUEPAIR_ALLOC, alloc_queuepair); + case IOCTL_VMCI_QUEUEPAIR_SETVA: + VMCI_DO_IOCTL(QUEUEPAIR_SETVA, queuepair_setva); + case IOCTL_VMCI_QUEUEPAIR_SETPAGEFILE: + VMCI_DO_IOCTL(QUEUEPAIR_SETPAGEFILE, queuepair_setpf); + case IOCTL_VMCI_QUEUEPAIR_DETACH: + VMCI_DO_IOCTL(QUEUEPAIR_DETACH, qp_detach); + case IOCTL_VMCI_CTX_ADD_NOTIFICATION: + VMCI_DO_IOCTL(CTX_ADD_NOTIFICATION, ctx_add_notify); + case IOCTL_VMCI_CTX_REMOVE_NOTIFICATION: + VMCI_DO_IOCTL(CTX_REMOVE_NOTIFICATION, ctx_remove_notify); + case IOCTL_VMCI_CTX_GET_CPT_STATE: + VMCI_DO_IOCTL(CTX_GET_CPT_STATE, ctx_get_cpt_state); + case IOCTL_VMCI_CTX_SET_CPT_STATE: + VMCI_DO_IOCTL(CTX_SET_CPT_STATE, ctx_set_cpt_state); + case IOCTL_VMCI_GET_CONTEXT_ID: + VMCI_DO_IOCTL(GET_CONTEXT_ID, get_context_id); + case IOCTL_VMCI_SET_NOTIFY: + VMCI_DO_IOCTL(SET_NOTIFY, set_notify); + case IOCTL_VMCI_NOTIFY_RESOURCE: + VMCI_DO_IOCTL(NOTIFY_RESOURCE, notify_resource); + case IOCTL_VMCI_NOTIFICATIONS_RECEIVE: + VMCI_DO_IOCTL(NOTIFICATIONS_RECEIVE, recv_notifications); + + case IOCTL_VMCI_VERSION: + case IOCTL_VMCI_VERSION2: + return vmci_host_get_version(vmci_host_dev, iocmd, uptr); + + default: + pr_devel("%s: Unknown ioctl (iocmd=%d)\n", __func__, iocmd); + return -EINVAL; + } + +#undef VMCI_DO_IOCTL +} + +static const struct file_operations vmuser_fops = { + .owner = THIS_MODULE, + .open = vmci_host_open, + .release = vmci_host_close, + .poll = vmci_host_poll, + .unlocked_ioctl = vmci_host_unlocked_ioctl, + .compat_ioctl = vmci_host_unlocked_ioctl, +}; + +static struct miscdevice vmci_host_miscdev = { + .name = "vmci", + .minor = MISC_DYNAMIC_MINOR, + .fops = &vmuser_fops, +}; + +int __init vmci_host_init(void) +{ + int error; + + host_context = vmci_ctx_create(VMCI_HOST_CONTEXT_ID, + VMCI_DEFAULT_PROC_PRIVILEGE_FLAGS, + -1, VMCI_VERSION, NULL); + if (IS_ERR(host_context)) { + error = PTR_ERR(host_context); + pr_warn("Failed to initialize VMCIContext (error%d)\n", + error); + return error; + } + + error = misc_register(&vmci_host_miscdev); + if (error) { + pr_warn("Module registration error (name=%s, major=%d, minor=%d, err=%d)\n", + vmci_host_miscdev.name, + MISC_MAJOR, vmci_host_miscdev.minor, + error); + pr_warn("Unable to initialize host personality\n"); + vmci_ctx_destroy(host_context); + return error; + } + + pr_info("VMCI host device registered (name=%s, major=%d, minor=%d)\n", + vmci_host_miscdev.name, MISC_MAJOR, vmci_host_miscdev.minor); + + vmci_host_device_initialized = true; + return 0; +} + +void __exit vmci_host_exit(void) +{ + int error; + + vmci_host_device_initialized = false; + + error = misc_deregister(&vmci_host_miscdev); + if (error) + pr_warn("Error unregistering character device: %d\n", error); + + vmci_ctx_destroy(host_context); + vmci_qp_broker_exit(); + + pr_debug("VMCI host driver module unloaded\n"); +} diff --git a/drivers/misc/vmw_vmci/vmci_queue_pair.c b/drivers/misc/vmw_vmci/vmci_queue_pair.c new file mode 100644 index 000000000000..d94245dbd765 --- /dev/null +++ b/drivers/misc/vmw_vmci/vmci_queue_pair.c @@ -0,0 +1,3425 @@ +/* + * VMware VMCI Driver + * + * Copyright (C) 2012 VMware, Inc. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation version 2 and no later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY + * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#include <linux/vmw_vmci_defs.h> +#include <linux/vmw_vmci_api.h> +#include <linux/highmem.h> +#include <linux/kernel.h> +#include <linux/mm.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/pagemap.h> +#include <linux/sched.h> +#include <linux/slab.h> +#include <linux/socket.h> +#include <linux/wait.h> +#include <linux/vmalloc.h> + +#include "vmci_handle_array.h" +#include "vmci_queue_pair.h" +#include "vmci_datagram.h" +#include "vmci_resource.h" +#include "vmci_context.h" +#include "vmci_driver.h" +#include "vmci_event.h" +#include "vmci_route.h" + +/* + * In the following, we will distinguish between two kinds of VMX processes - + * the ones with versions lower than VMCI_VERSION_NOVMVM that use specialized + * VMCI page files in the VMX and supporting VM to VM communication and the + * newer ones that use the guest memory directly. We will in the following + * refer to the older VMX versions as old-style VMX'en, and the newer ones as + * new-style VMX'en. + * + * The state transition datagram is as follows (the VMCIQPB_ prefix has been + * removed for readability) - see below for more details on the transtions: + * + * -------------- NEW ------------- + * | | + * \_/ \_/ + * CREATED_NO_MEM <-----------------> CREATED_MEM + * | | | + * | o-----------------------o | + * | | | + * \_/ \_/ \_/ + * ATTACHED_NO_MEM <----------------> ATTACHED_MEM + * | | | + * | o----------------------o | + * | | | + * \_/ \_/ \_/ + * SHUTDOWN_NO_MEM <----------------> SHUTDOWN_MEM + * | | + * | | + * -------------> gone <------------- + * + * In more detail. When a VMCI queue pair is first created, it will be in the + * VMCIQPB_NEW state. It will then move into one of the following states: + * + * - VMCIQPB_CREATED_NO_MEM: this state indicates that either: + * + * - the created was performed by a host endpoint, in which case there is + * no backing memory yet. + * + * - the create was initiated by an old-style VMX, that uses + * vmci_qp_broker_set_page_store to specify the UVAs of the queue pair at + * a later point in time. This state can be distinguished from the one + * above by the context ID of the creator. A host side is not allowed to + * attach until the page store has been set. + * + * - VMCIQPB_CREATED_MEM: this state is the result when the queue pair + * is created by a VMX using the queue pair device backend that + * sets the UVAs of the queue pair immediately and stores the + * information for later attachers. At this point, it is ready for + * the host side to attach to it. + * + * Once the queue pair is in one of the created states (with the exception of + * the case mentioned for older VMX'en above), it is possible to attach to the + * queue pair. Again we have two new states possible: + * + * - VMCIQPB_ATTACHED_MEM: this state can be reached through the following + * paths: + * + * - from VMCIQPB_CREATED_NO_MEM when a new-style VMX allocates a queue + * pair, and attaches to a queue pair previously created by the host side. + * + * - from VMCIQPB_CREATED_MEM when the host side attaches to a queue pair + * already created by a guest. + * + * - from VMCIQPB_ATTACHED_NO_MEM, when an old-style VMX calls + * vmci_qp_broker_set_page_store (see below). + * + * - VMCIQPB_ATTACHED_NO_MEM: If the queue pair already was in the + * VMCIQPB_CREATED_NO_MEM due to a host side create, an old-style VMX will + * bring the queue pair into this state. Once vmci_qp_broker_set_page_store + * is called to register the user memory, the VMCIQPB_ATTACH_MEM state + * will be entered. + * + * From the attached queue pair, the queue pair can enter the shutdown states + * when either side of the queue pair detaches. If the guest side detaches + * first, the queue pair will enter the VMCIQPB_SHUTDOWN_NO_MEM state, where + * the content of the queue pair will no longer be available. If the host + * side detaches first, the queue pair will either enter the + * VMCIQPB_SHUTDOWN_MEM, if the guest memory is currently mapped, or + * VMCIQPB_SHUTDOWN_NO_MEM, if the guest memory is not mapped + * (e.g., the host detaches while a guest is stunned). + * + * New-style VMX'en will also unmap guest memory, if the guest is + * quiesced, e.g., during a snapshot operation. In that case, the guest + * memory will no longer be available, and the queue pair will transition from + * *_MEM state to a *_NO_MEM state. The VMX may later map the memory once more, + * in which case the queue pair will transition from the *_NO_MEM state at that + * point back to the *_MEM state. Note that the *_NO_MEM state may have changed, + * since the peer may have either attached or detached in the meantime. The + * values are laid out such that ++ on a state will move from a *_NO_MEM to a + * *_MEM state, and vice versa. + */ + +/* + * VMCIMemcpy{To,From}QueueFunc() prototypes. Functions of these + * types are passed around to enqueue and dequeue routines. Note that + * often the functions passed are simply wrappers around memcpy + * itself. + * + * Note: In order for the memcpy typedefs to be compatible with the VMKernel, + * there's an unused last parameter for the hosted side. In + * ESX, that parameter holds a buffer type. + */ +typedef int vmci_memcpy_to_queue_func(struct vmci_queue *queue, + u64 queue_offset, const void *src, + size_t src_offset, size_t size); +typedef int vmci_memcpy_from_queue_func(void *dest, size_t dest_offset, + const struct vmci_queue *queue, + u64 queue_offset, size_t size); + +/* The Kernel specific component of the struct vmci_queue structure. */ +struct vmci_queue_kern_if { + struct page **page; + struct page **header_page; + void *va; + struct mutex __mutex; /* Protects the queue. */ + struct mutex *mutex; /* Shared by producer and consumer queues. */ + bool host; + size_t num_pages; + bool mapped; +}; + +/* + * This structure is opaque to the clients. + */ +struct vmci_qp { + struct vmci_handle handle; + struct vmci_queue *produce_q; + struct vmci_queue *consume_q; + u64 produce_q_size; + u64 consume_q_size; + u32 peer; + u32 flags; + u32 priv_flags; + bool guest_endpoint; + unsigned int blocked; + unsigned int generation; + wait_queue_head_t event; +}; + +enum qp_broker_state { + VMCIQPB_NEW, + VMCIQPB_CREATED_NO_MEM, + VMCIQPB_CREATED_MEM, + VMCIQPB_ATTACHED_NO_MEM, + VMCIQPB_ATTACHED_MEM, + VMCIQPB_SHUTDOWN_NO_MEM, + VMCIQPB_SHUTDOWN_MEM, + VMCIQPB_GONE +}; + +#define QPBROKERSTATE_HAS_MEM(_qpb) (_qpb->state == VMCIQPB_CREATED_MEM || \ + _qpb->state == VMCIQPB_ATTACHED_MEM || \ + _qpb->state == VMCIQPB_SHUTDOWN_MEM) + +/* + * In the queue pair broker, we always use the guest point of view for + * the produce and consume queue values and references, e.g., the + * produce queue size stored is the guests produce queue size. The + * host endpoint will need to swap these around. The only exception is + * the local queue pairs on the host, in which case the host endpoint + * that creates the queue pair will have the right orientation, and + * the attaching host endpoint will need to swap. + */ +struct qp_entry { + struct list_head list_item; + struct vmci_handle handle; + u32 peer; + u32 flags; + u64 produce_size; + u64 consume_size; + u32 ref_count; +}; + +struct qp_broker_entry { + struct vmci_resource resource; + struct qp_entry qp; + u32 create_id; + u32 attach_id; + enum qp_broker_state state; + bool require_trusted_attach; + bool created_by_trusted; + bool vmci_page_files; /* Created by VMX using VMCI page files */ + struct vmci_queue *produce_q; + struct vmci_queue *consume_q; + struct vmci_queue_header saved_produce_q; + struct vmci_queue_header saved_consume_q; + vmci_event_release_cb wakeup_cb; + void *client_data; + void *local_mem; /* Kernel memory for local queue pair */ +}; + +struct qp_guest_endpoint { + struct vmci_resource resource; + struct qp_entry qp; + u64 num_ppns; + void *produce_q; + void *consume_q; + struct ppn_set ppn_set; +}; + +struct qp_list { + struct list_head head; + struct mutex mutex; /* Protect queue list. */ +}; + +static struct qp_list qp_broker_list = { + .head = LIST_HEAD_INIT(qp_broker_list.head), + .mutex = __MUTEX_INITIALIZER(qp_broker_list.mutex), +}; + +static struct qp_list qp_guest_endpoints = { + .head = LIST_HEAD_INIT(qp_guest_endpoints.head), + .mutex = __MUTEX_INITIALIZER(qp_guest_endpoints.mutex), +}; + +#define INVALID_VMCI_GUEST_MEM_ID 0 +#define QPE_NUM_PAGES(_QPE) ((u32) \ + (DIV_ROUND_UP(_QPE.produce_size, PAGE_SIZE) + \ + DIV_ROUND_UP(_QPE.consume_size, PAGE_SIZE) + 2)) + + +/* + * Frees kernel VA space for a given queue and its queue header, and + * frees physical data pages. + */ +static void qp_free_queue(void *q, u64 size) +{ + struct vmci_queue *queue = q; + + if (queue) { + u64 i = DIV_ROUND_UP(size, PAGE_SIZE); + + if (queue->kernel_if->mapped) { + vunmap(queue->kernel_if->va); + queue->kernel_if->va = NULL; + } + + while (i) + __free_page(queue->kernel_if->page[--i]); + + vfree(queue->q_header); + } +} + +/* + * Allocates kernel VA space of specified size, plus space for the + * queue structure/kernel interface and the queue header. Allocates + * physical pages for the queue data pages. + * + * PAGE m: struct vmci_queue_header (struct vmci_queue->q_header) + * PAGE m+1: struct vmci_queue + * PAGE m+1+q: struct vmci_queue_kern_if (struct vmci_queue->kernel_if) + * PAGE n-size: Data pages (struct vmci_queue->kernel_if->page[]) + */ +static void *qp_alloc_queue(u64 size, u32 flags) +{ + u64 i; + struct vmci_queue *queue; + struct vmci_queue_header *q_header; + const u64 num_data_pages = DIV_ROUND_UP(size, PAGE_SIZE); + const uint queue_size = + PAGE_SIZE + + sizeof(*queue) + sizeof(*(queue->kernel_if)) + + num_data_pages * sizeof(*(queue->kernel_if->page)); + + q_header = vmalloc(queue_size); + if (!q_header) + return NULL; + + queue = (void *)q_header + PAGE_SIZE; + queue->q_header = q_header; + queue->saved_header = NULL; + queue->kernel_if = (struct vmci_queue_kern_if *)(queue + 1); + queue->kernel_if->header_page = NULL; /* Unused in guest. */ + queue->kernel_if->page = (struct page **)(queue->kernel_if + 1); + queue->kernel_if->host = false; + queue->kernel_if->va = NULL; + queue->kernel_if->mapped = false; + + for (i = 0; i < num_data_pages; i++) { + queue->kernel_if->page[i] = alloc_pages(GFP_KERNEL, 0); + if (!queue->kernel_if->page[i]) + goto fail; + } + + if (vmci_qp_pinned(flags)) { + queue->kernel_if->va = + vmap(queue->kernel_if->page, num_data_pages, VM_MAP, + PAGE_KERNEL); + if (!queue->kernel_if->va) + goto fail; + + queue->kernel_if->mapped = true; + } + + return (void *)queue; + + fail: + qp_free_queue(queue, i * PAGE_SIZE); + return NULL; +} + +/* + * Copies from a given buffer or iovector to a VMCI Queue. Uses + * kmap()/kunmap() to dynamically map/unmap required portions of the queue + * by traversing the offset -> page translation structure for the queue. + * Assumes that offset + size does not wrap around in the queue. + */ +static int __qp_memcpy_to_queue(struct vmci_queue *queue, + u64 queue_offset, + const void *src, + size_t size, + bool is_iovec) +{ + struct vmci_queue_kern_if *kernel_if = queue->kernel_if; + size_t bytes_copied = 0; + + while (bytes_copied < size) { + u64 page_index = (queue_offset + bytes_copied) / PAGE_SIZE; + size_t page_offset = + (queue_offset + bytes_copied) & (PAGE_SIZE - 1); + void *va; + size_t to_copy; + + if (!kernel_if->mapped) + va = kmap(kernel_if->page[page_index]); + else + va = (void *)((u8 *)kernel_if->va + + (page_index * PAGE_SIZE)); + + if (size - bytes_copied > PAGE_SIZE - page_offset) + /* Enough payload to fill up from this page. */ + to_copy = PAGE_SIZE - page_offset; + else + to_copy = size - bytes_copied; + + if (is_iovec) { + struct iovec *iov = (struct iovec *)src; + int err; + + /* The iovec will track bytes_copied internally. */ + err = memcpy_fromiovec((u8 *)va + page_offset, + iov, to_copy); + if (err != 0) { + kunmap(kernel_if->page[page_index]); + return VMCI_ERROR_INVALID_ARGS; + } + } else { + memcpy((u8 *)va + page_offset, + (u8 *)src + bytes_copied, to_copy); + } + + bytes_copied += to_copy; + if (!kernel_if->mapped) + kunmap(kernel_if->page[page_index]); + } + + return VMCI_SUCCESS; +} + +/* + * Copies to a given buffer or iovector from a VMCI Queue. Uses + * kmap()/kunmap() to dynamically map/unmap required portions of the queue + * by traversing the offset -> page translation structure for the queue. + * Assumes that offset + size does not wrap around in the queue. + */ +static int __qp_memcpy_from_queue(void *dest, + const struct vmci_queue *queue, + u64 queue_offset, + size_t size, + bool is_iovec) +{ + struct vmci_queue_kern_if *kernel_if = queue->kernel_if; + size_t bytes_copied = 0; + + while (bytes_copied < size) { + u64 page_index = (queue_offset + bytes_copied) / PAGE_SIZE; + size_t page_offset = + (queue_offset + bytes_copied) & (PAGE_SIZE - 1); + void *va; + size_t to_copy; + + if (!kernel_if->mapped) + va = kmap(kernel_if->page[page_index]); + else + va = (void *)((u8 *)kernel_if->va + + (page_index * PAGE_SIZE)); + + if (size - bytes_copied > PAGE_SIZE - page_offset) + /* Enough payload to fill up this page. */ + to_copy = PAGE_SIZE - page_offset; + else + to_copy = size - bytes_copied; + + if (is_iovec) { + struct iovec *iov = (struct iovec *)dest; + int err; + + /* The iovec will track bytes_copied internally. */ + err = memcpy_toiovec(iov, (u8 *)va + page_offset, + to_copy); + if (err != 0) { + kunmap(kernel_if->page[page_index]); + return VMCI_ERROR_INVALID_ARGS; + } + } else { + memcpy((u8 *)dest + bytes_copied, + (u8 *)va + page_offset, to_copy); + } + + bytes_copied += to_copy; + if (!kernel_if->mapped) + kunmap(kernel_if->page[page_index]); + } + + return VMCI_SUCCESS; +} + +/* + * Allocates two list of PPNs --- one for the pages in the produce queue, + * and the other for the pages in the consume queue. Intializes the list + * of PPNs with the page frame numbers of the KVA for the two queues (and + * the queue headers). + */ +static int qp_alloc_ppn_set(void *prod_q, + u64 num_produce_pages, + void *cons_q, + u64 num_consume_pages, struct ppn_set *ppn_set) +{ + u32 *produce_ppns; + u32 *consume_ppns; + struct vmci_queue *produce_q = prod_q; + struct vmci_queue *consume_q = cons_q; + u64 i; + + if (!produce_q || !num_produce_pages || !consume_q || + !num_consume_pages || !ppn_set) + return VMCI_ERROR_INVALID_ARGS; + + if (ppn_set->initialized) + return VMCI_ERROR_ALREADY_EXISTS; + + produce_ppns = + kmalloc(num_produce_pages * sizeof(*produce_ppns), GFP_KERNEL); + if (!produce_ppns) + return VMCI_ERROR_NO_MEM; + + consume_ppns = + kmalloc(num_consume_pages * sizeof(*consume_ppns), GFP_KERNEL); + if (!consume_ppns) { + kfree(produce_ppns); + return VMCI_ERROR_NO_MEM; + } + + produce_ppns[0] = page_to_pfn(vmalloc_to_page(produce_q->q_header)); + for (i = 1; i < num_produce_pages; i++) { + unsigned long pfn; + + produce_ppns[i] = + page_to_pfn(produce_q->kernel_if->page[i - 1]); + pfn = produce_ppns[i]; + + /* Fail allocation if PFN isn't supported by hypervisor. */ + if (sizeof(pfn) > sizeof(*produce_ppns) + && pfn != produce_ppns[i]) + goto ppn_error; + } + + consume_ppns[0] = page_to_pfn(vmalloc_to_page(consume_q->q_header)); + for (i = 1; i < num_consume_pages; i++) { + unsigned long pfn; + + consume_ppns[i] = + page_to_pfn(consume_q->kernel_if->page[i - 1]); + pfn = consume_ppns[i]; + + /* Fail allocation if PFN isn't supported by hypervisor. */ + if (sizeof(pfn) > sizeof(*consume_ppns) + && pfn != consume_ppns[i]) + goto ppn_error; + } + + ppn_set->num_produce_pages = num_produce_pages; + ppn_set->num_consume_pages = num_consume_pages; + ppn_set->produce_ppns = produce_ppns; + ppn_set->consume_ppns = consume_ppns; + ppn_set->initialized = true; + return VMCI_SUCCESS; + + ppn_error: + kfree(produce_ppns); + kfree(consume_ppns); + return VMCI_ERROR_INVALID_ARGS; +} + +/* + * Frees the two list of PPNs for a queue pair. + */ +static void qp_free_ppn_set(struct ppn_set *ppn_set) +{ + if (ppn_set->initialized) { + /* Do not call these functions on NULL inputs. */ + kfree(ppn_set->produce_ppns); + kfree(ppn_set->consume_ppns); + } + memset(ppn_set, 0, sizeof(*ppn_set)); +} + +/* + * Populates the list of PPNs in the hypercall structure with the PPNS + * of the produce queue and the consume queue. + */ +static int qp_populate_ppn_set(u8 *call_buf, const struct ppn_set *ppn_set) +{ + memcpy(call_buf, ppn_set->produce_ppns, + ppn_set->num_produce_pages * sizeof(*ppn_set->produce_ppns)); + memcpy(call_buf + + ppn_set->num_produce_pages * sizeof(*ppn_set->produce_ppns), + ppn_set->consume_ppns, + ppn_set->num_consume_pages * sizeof(*ppn_set->consume_ppns)); + + return VMCI_SUCCESS; +} + +static int qp_memcpy_to_queue(struct vmci_queue *queue, + u64 queue_offset, + const void *src, size_t src_offset, size_t size) +{ + return __qp_memcpy_to_queue(queue, queue_offset, + (u8 *)src + src_offset, size, false); +} + +static int qp_memcpy_from_queue(void *dest, + size_t dest_offset, + const struct vmci_queue *queue, + u64 queue_offset, size_t size) +{ + return __qp_memcpy_from_queue((u8 *)dest + dest_offset, + queue, queue_offset, size, false); +} + +/* + * Copies from a given iovec from a VMCI Queue. + */ +static int qp_memcpy_to_queue_iov(struct vmci_queue *queue, + u64 queue_offset, + const void *src, + size_t src_offset, size_t size) +{ + + /* + * We ignore src_offset because src is really a struct iovec * and will + * maintain offset internally. + */ + return __qp_memcpy_to_queue(queue, queue_offset, src, size, true); +} + +/* + * Copies to a given iovec from a VMCI Queue. + */ +static int qp_memcpy_from_queue_iov(void *dest, + size_t dest_offset, + const struct vmci_queue *queue, + u64 queue_offset, size_t size) +{ + /* + * We ignore dest_offset because dest is really a struct iovec * and + * will maintain offset internally. + */ + return __qp_memcpy_from_queue(dest, queue, queue_offset, size, true); +} + +/* + * Allocates kernel VA space of specified size plus space for the queue + * and kernel interface. This is different from the guest queue allocator, + * because we do not allocate our own queue header/data pages here but + * share those of the guest. + */ +static struct vmci_queue *qp_host_alloc_queue(u64 size) +{ + struct vmci_queue *queue; + const size_t num_pages = DIV_ROUND_UP(size, PAGE_SIZE) + 1; + const size_t queue_size = sizeof(*queue) + sizeof(*(queue->kernel_if)); + const size_t queue_page_size = + num_pages * sizeof(*queue->kernel_if->page); + + queue = kzalloc(queue_size + queue_page_size, GFP_KERNEL); + if (queue) { + queue->q_header = NULL; + queue->saved_header = NULL; + queue->kernel_if = + (struct vmci_queue_kern_if *)((u8 *)queue + + sizeof(*queue)); + queue->kernel_if->host = true; + queue->kernel_if->mutex = NULL; + queue->kernel_if->num_pages = num_pages; + queue->kernel_if->header_page = + (struct page **)((u8 *)queue + queue_size); + queue->kernel_if->page = &queue->kernel_if->header_page[1]; + queue->kernel_if->va = NULL; + queue->kernel_if->mapped = false; + } + + return queue; +} + +/* + * Frees kernel memory for a given queue (header plus translation + * structure). + */ +static void qp_host_free_queue(struct vmci_queue *queue, u64 queue_size) +{ + kfree(queue); +} + +/* + * Initialize the mutex for the pair of queues. This mutex is used to + * protect the q_header and the buffer from changing out from under any + * users of either queue. Of course, it's only any good if the mutexes + * are actually acquired. Queue structure must lie on non-paged memory + * or we cannot guarantee access to the mutex. + */ +static void qp_init_queue_mutex(struct vmci_queue *produce_q, + struct vmci_queue *consume_q) +{ + /* + * Only the host queue has shared state - the guest queues do not + * need to synchronize access using a queue mutex. + */ + + if (produce_q->kernel_if->host) { + produce_q->kernel_if->mutex = &produce_q->kernel_if->__mutex; + consume_q->kernel_if->mutex = &produce_q->kernel_if->__mutex; + mutex_init(produce_q->kernel_if->mutex); + } +} + +/* + * Cleans up the mutex for the pair of queues. + */ +static void qp_cleanup_queue_mutex(struct vmci_queue *produce_q, + struct vmci_queue *consume_q) +{ + if (produce_q->kernel_if->host) { + produce_q->kernel_if->mutex = NULL; + consume_q->kernel_if->mutex = NULL; + } +} + +/* + * Acquire the mutex for the queue. Note that the produce_q and + * the consume_q share a mutex. So, only one of the two need to + * be passed in to this routine. Either will work just fine. + */ +static void qp_acquire_queue_mutex(struct vmci_queue *queue) +{ + if (queue->kernel_if->host) + mutex_lock(queue->kernel_if->mutex); +} + +/* + * Release the mutex for the queue. Note that the produce_q and + * the consume_q share a mutex. So, only one of the two need to + * be passed in to this routine. Either will work just fine. + */ +static void qp_release_queue_mutex(struct vmci_queue *queue) +{ + if (queue->kernel_if->host) + mutex_unlock(queue->kernel_if->mutex); +} + +/* + * Helper function to release pages in the PageStoreAttachInfo + * previously obtained using get_user_pages. + */ +static void qp_release_pages(struct page **pages, + u64 num_pages, bool dirty) +{ + int i; + + for (i = 0; i < num_pages; i++) { + if (dirty) + set_page_dirty(pages[i]); + + page_cache_release(pages[i]); + pages[i] = NULL; + } +} + +/* + * Lock the user pages referenced by the {produce,consume}Buffer + * struct into memory and populate the {produce,consume}Pages + * arrays in the attach structure with them. + */ +static int qp_host_get_user_memory(u64 produce_uva, + u64 consume_uva, + struct vmci_queue *produce_q, + struct vmci_queue *consume_q) +{ + int retval; + int err = VMCI_SUCCESS; + + down_write(¤t->mm->mmap_sem); + retval = get_user_pages(current, + current->mm, + (uintptr_t) produce_uva, + produce_q->kernel_if->num_pages, + 1, 0, produce_q->kernel_if->header_page, NULL); + if (retval < produce_q->kernel_if->num_pages) { + pr_warn("get_user_pages(produce) failed (retval=%d)", retval); + qp_release_pages(produce_q->kernel_if->header_page, retval, + false); + err = VMCI_ERROR_NO_MEM; + goto out; + } + + retval = get_user_pages(current, + current->mm, + (uintptr_t) consume_uva, + consume_q->kernel_if->num_pages, + 1, 0, consume_q->kernel_if->header_page, NULL); + if (retval < consume_q->kernel_if->num_pages) { + pr_warn("get_user_pages(consume) failed (retval=%d)", retval); + qp_release_pages(consume_q->kernel_if->header_page, retval, + false); + qp_release_pages(produce_q->kernel_if->header_page, + produce_q->kernel_if->num_pages, false); + err = VMCI_ERROR_NO_MEM; + } + + out: + up_write(¤t->mm->mmap_sem); + + return err; +} + +/* + * Registers the specification of the user pages used for backing a queue + * pair. Enough information to map in pages is stored in the OS specific + * part of the struct vmci_queue structure. + */ +static int qp_host_register_user_memory(struct vmci_qp_page_store *page_store, + struct vmci_queue *produce_q, + struct vmci_queue *consume_q) +{ + u64 produce_uva; + u64 consume_uva; + + /* + * The new style and the old style mapping only differs in + * that we either get a single or two UVAs, so we split the + * single UVA range at the appropriate spot. + */ + produce_uva = page_store->pages; + consume_uva = page_store->pages + + produce_q->kernel_if->num_pages * PAGE_SIZE; + return qp_host_get_user_memory(produce_uva, consume_uva, produce_q, + consume_q); +} + +/* + * Releases and removes the references to user pages stored in the attach + * struct. Pages are released from the page cache and may become + * swappable again. + */ +static void qp_host_unregister_user_memory(struct vmci_queue *produce_q, + struct vmci_queue *consume_q) +{ + qp_release_pages(produce_q->kernel_if->header_page, + produce_q->kernel_if->num_pages, true); + memset(produce_q->kernel_if->header_page, 0, + sizeof(*produce_q->kernel_if->header_page) * + produce_q->kernel_if->num_pages); + qp_release_pages(consume_q->kernel_if->header_page, + consume_q->kernel_if->num_pages, true); + memset(consume_q->kernel_if->header_page, 0, + sizeof(*consume_q->kernel_if->header_page) * + consume_q->kernel_if->num_pages); +} + +/* + * Once qp_host_register_user_memory has been performed on a + * queue, the queue pair headers can be mapped into the + * kernel. Once mapped, they must be unmapped with + * qp_host_unmap_queues prior to calling + * qp_host_unregister_user_memory. + * Pages are pinned. + */ +static int qp_host_map_queues(struct vmci_queue *produce_q, + struct vmci_queue *consume_q) +{ + int result; + + if (!produce_q->q_header || !consume_q->q_header) { + struct page *headers[2]; + + if (produce_q->q_header != consume_q->q_header) + return VMCI_ERROR_QUEUEPAIR_MISMATCH; + + if (produce_q->kernel_if->header_page == NULL || + *produce_q->kernel_if->header_page == NULL) + return VMCI_ERROR_UNAVAILABLE; + + headers[0] = *produce_q->kernel_if->header_page; + headers[1] = *consume_q->kernel_if->header_page; + + produce_q->q_header = vmap(headers, 2, VM_MAP, PAGE_KERNEL); + if (produce_q->q_header != NULL) { + consume_q->q_header = + (struct vmci_queue_header *)((u8 *) + produce_q->q_header + + PAGE_SIZE); + result = VMCI_SUCCESS; + } else { + pr_warn("vmap failed\n"); + result = VMCI_ERROR_NO_MEM; + } + } else { + result = VMCI_SUCCESS; + } + + return result; +} + +/* + * Unmaps previously mapped queue pair headers from the kernel. + * Pages are unpinned. + */ +static int qp_host_unmap_queues(u32 gid, + struct vmci_queue *produce_q, + struct vmci_queue *consume_q) +{ + if (produce_q->q_header) { + if (produce_q->q_header < consume_q->q_header) + vunmap(produce_q->q_header); + else + vunmap(consume_q->q_header); + + produce_q->q_header = NULL; + consume_q->q_header = NULL; + } + + return VMCI_SUCCESS; +} + +/* + * Finds the entry in the list corresponding to a given handle. Assumes + * that the list is locked. + */ +static struct qp_entry *qp_list_find(struct qp_list *qp_list, + struct vmci_handle handle) +{ + struct qp_entry *entry; + + if (vmci_handle_is_invalid(handle)) + return NULL; + + list_for_each_entry(entry, &qp_list->head, list_item) { + if (vmci_handle_is_equal(entry->handle, handle)) + return entry; + } + + return NULL; +} + +/* + * Finds the entry in the list corresponding to a given handle. + */ +static struct qp_guest_endpoint * +qp_guest_handle_to_entry(struct vmci_handle handle) +{ + struct qp_guest_endpoint *entry; + struct qp_entry *qp = qp_list_find(&qp_guest_endpoints, handle); + + entry = qp ? container_of( + qp, struct qp_guest_endpoint, qp) : NULL; + return entry; +} + +/* + * Finds the entry in the list corresponding to a given handle. + */ +static struct qp_broker_entry * +qp_broker_handle_to_entry(struct vmci_handle handle) +{ + struct qp_broker_entry *entry; + struct qp_entry *qp = qp_list_find(&qp_broker_list, handle); + + entry = qp ? container_of( + qp, struct qp_broker_entry, qp) : NULL; + return entry; +} + +/* + * Dispatches a queue pair event message directly into the local event + * queue. + */ +static int qp_notify_peer_local(bool attach, struct vmci_handle handle) +{ + u32 context_id = vmci_get_context_id(); + struct vmci_event_qp ev; + + ev.msg.hdr.dst = vmci_make_handle(context_id, VMCI_EVENT_HANDLER); + ev.msg.hdr.src = vmci_make_handle(VMCI_HYPERVISOR_CONTEXT_ID, + VMCI_CONTEXT_RESOURCE_ID); + ev.msg.hdr.payload_size = sizeof(ev) - sizeof(ev.msg.hdr); + ev.msg.event_data.event = + attach ? VMCI_EVENT_QP_PEER_ATTACH : VMCI_EVENT_QP_PEER_DETACH; + ev.payload.peer_id = context_id; + ev.payload.handle = handle; + + return vmci_event_dispatch(&ev.msg.hdr); +} + +/* + * Allocates and initializes a qp_guest_endpoint structure. + * Allocates a queue_pair rid (and handle) iff the given entry has + * an invalid handle. 0 through VMCI_RESERVED_RESOURCE_ID_MAX + * are reserved handles. Assumes that the QP list mutex is held + * by the caller. + */ +static struct qp_guest_endpoint * +qp_guest_endpoint_create(struct vmci_handle handle, + u32 peer, + u32 flags, + u64 produce_size, + u64 consume_size, + void *produce_q, + void *consume_q) +{ + int result; + struct qp_guest_endpoint *entry; + /* One page each for the queue headers. */ + const u64 num_ppns = DIV_ROUND_UP(produce_size, PAGE_SIZE) + + DIV_ROUND_UP(consume_size, PAGE_SIZE) + 2; + + if (vmci_handle_is_invalid(handle)) { + u32 context_id = vmci_get_context_id(); + + handle = vmci_make_handle(context_id, VMCI_INVALID_ID); + } + + entry = kzalloc(sizeof(*entry), GFP_KERNEL); + if (entry) { + entry->qp.peer = peer; + entry->qp.flags = flags; + entry->qp.produce_size = produce_size; + entry->qp.consume_size = consume_size; + entry->qp.ref_count = 0; + entry->num_ppns = num_ppns; + entry->produce_q = produce_q; + entry->consume_q = consume_q; + INIT_LIST_HEAD(&entry->qp.list_item); + + /* Add resource obj */ + result = vmci_resource_add(&entry->resource, + VMCI_RESOURCE_TYPE_QPAIR_GUEST, + handle); + entry->qp.handle = vmci_resource_handle(&entry->resource); + if ((result != VMCI_SUCCESS) || + qp_list_find(&qp_guest_endpoints, entry->qp.handle)) { + pr_warn("Failed to add new resource (handle=0x%x:0x%x), error: %d", + handle.context, handle.resource, result); + kfree(entry); + entry = NULL; + } + } + return entry; +} + +/* + * Frees a qp_guest_endpoint structure. + */ +static void qp_guest_endpoint_destroy(struct qp_guest_endpoint *entry) +{ + qp_free_ppn_set(&entry->ppn_set); + qp_cleanup_queue_mutex(entry->produce_q, entry->consume_q); + qp_free_queue(entry->produce_q, entry->qp.produce_size); + qp_free_queue(entry->consume_q, entry->qp.consume_size); + /* Unlink from resource hash table and free callback */ + vmci_resource_remove(&entry->resource); + + kfree(entry); +} + +/* + * Helper to make a queue_pairAlloc hypercall when the driver is + * supporting a guest device. + */ +static int qp_alloc_hypercall(const struct qp_guest_endpoint *entry) +{ + struct vmci_qp_alloc_msg *alloc_msg; + size_t msg_size; + int result; + + if (!entry || entry->num_ppns <= 2) + return VMCI_ERROR_INVALID_ARGS; + + msg_size = sizeof(*alloc_msg) + + (size_t) entry->num_ppns * sizeof(u32); + alloc_msg = kmalloc(msg_size, GFP_KERNEL); + if (!alloc_msg) + return VMCI_ERROR_NO_MEM; + + alloc_msg->hdr.dst = vmci_make_handle(VMCI_HYPERVISOR_CONTEXT_ID, + VMCI_QUEUEPAIR_ALLOC); + alloc_msg->hdr.src = VMCI_ANON_SRC_HANDLE; + alloc_msg->hdr.payload_size = msg_size - VMCI_DG_HEADERSIZE; + alloc_msg->handle = entry->qp.handle; + alloc_msg->peer = entry->qp.peer; + alloc_msg->flags = entry->qp.flags; + alloc_msg->produce_size = entry->qp.produce_size; + alloc_msg->consume_size = entry->qp.consume_size; + alloc_msg->num_ppns = entry->num_ppns; + + result = qp_populate_ppn_set((u8 *)alloc_msg + sizeof(*alloc_msg), + &entry->ppn_set); + if (result == VMCI_SUCCESS) + result = vmci_send_datagram(&alloc_msg->hdr); + + kfree(alloc_msg); + + return result; +} + +/* + * Helper to make a queue_pairDetach hypercall when the driver is + * supporting a guest device. + */ +static int qp_detatch_hypercall(struct vmci_handle handle) +{ + struct vmci_qp_detach_msg detach_msg; + + detach_msg.hdr.dst = vmci_make_handle(VMCI_HYPERVISOR_CONTEXT_ID, + VMCI_QUEUEPAIR_DETACH); + detach_msg.hdr.src = VMCI_ANON_SRC_HANDLE; + detach_msg.hdr.payload_size = sizeof(handle); + detach_msg.handle = handle; + + return vmci_send_datagram(&detach_msg.hdr); +} + +/* + * Adds the given entry to the list. Assumes that the list is locked. + */ +static void qp_list_add_entry(struct qp_list *qp_list, struct qp_entry *entry) +{ + if (entry) + list_add(&entry->list_item, &qp_list->head); +} + +/* + * Removes the given entry from the list. Assumes that the list is locked. + */ +static void qp_list_remove_entry(struct qp_list *qp_list, + struct qp_entry *entry) +{ + if (entry) + list_del(&entry->list_item); +} + +/* + * Helper for VMCI queue_pair detach interface. Frees the physical + * pages for the queue pair. + */ +static int qp_detatch_guest_work(struct vmci_handle handle) +{ + int result; + struct qp_guest_endpoint *entry; + u32 ref_count = ~0; /* To avoid compiler warning below */ + + mutex_lock(&qp_guest_endpoints.mutex); + + entry = qp_guest_handle_to_entry(handle); + if (!entry) { + mutex_unlock(&qp_guest_endpoints.mutex); + return VMCI_ERROR_NOT_FOUND; + } + + if (entry->qp.flags & VMCI_QPFLAG_LOCAL) { + result = VMCI_SUCCESS; + + if (entry->qp.ref_count > 1) { + result = qp_notify_peer_local(false, handle); + /* + * We can fail to notify a local queuepair + * because we can't allocate. We still want + * to release the entry if that happens, so + * don't bail out yet. + */ + } + } else { + result = qp_detatch_hypercall(handle); + if (result < VMCI_SUCCESS) { + /* + * We failed to notify a non-local queuepair. + * That other queuepair might still be + * accessing the shared memory, so don't + * release the entry yet. It will get cleaned + * up by VMCIqueue_pair_Exit() if necessary + * (assuming we are going away, otherwise why + * did this fail?). + */ + + mutex_unlock(&qp_guest_endpoints.mutex); + return result; + } + } + + /* + * If we get here then we either failed to notify a local queuepair, or + * we succeeded in all cases. Release the entry if required. + */ + + entry->qp.ref_count--; + if (entry->qp.ref_count == 0) + qp_list_remove_entry(&qp_guest_endpoints, &entry->qp); + + /* If we didn't remove the entry, this could change once we unlock. */ + if (entry) + ref_count = entry->qp.ref_count; + + mutex_unlock(&qp_guest_endpoints.mutex); + + if (ref_count == 0) + qp_guest_endpoint_destroy(entry); + + return result; +} + +/* + * This functions handles the actual allocation of a VMCI queue + * pair guest endpoint. Allocates physical pages for the queue + * pair. It makes OS dependent calls through generic wrappers. + */ +static int qp_alloc_guest_work(struct vmci_handle *handle, + struct vmci_queue **produce_q, + u64 produce_size, + struct vmci_queue **consume_q, + u64 consume_size, + u32 peer, + u32 flags, + u32 priv_flags) +{ + const u64 num_produce_pages = + DIV_ROUND_UP(produce_size, PAGE_SIZE) + 1; + const u64 num_consume_pages = + DIV_ROUND_UP(consume_size, PAGE_SIZE) + 1; + void *my_produce_q = NULL; + void *my_consume_q = NULL; + int result; + struct qp_guest_endpoint *queue_pair_entry = NULL; + + if (priv_flags != VMCI_NO_PRIVILEGE_FLAGS) + return VMCI_ERROR_NO_ACCESS; + + mutex_lock(&qp_guest_endpoints.mutex); + + queue_pair_entry = qp_guest_handle_to_entry(*handle); + if (queue_pair_entry) { + if (queue_pair_entry->qp.flags & VMCI_QPFLAG_LOCAL) { + /* Local attach case. */ + if (queue_pair_entry->qp.ref_count > 1) { + pr_devel("Error attempting to attach more than once\n"); + result = VMCI_ERROR_UNAVAILABLE; + goto error_keep_entry; + } + + if (queue_pair_entry->qp.produce_size != consume_size || + queue_pair_entry->qp.consume_size != + produce_size || + queue_pair_entry->qp.flags != + (flags & ~VMCI_QPFLAG_ATTACH_ONLY)) { + pr_devel("Error mismatched queue pair in local attach\n"); + result = VMCI_ERROR_QUEUEPAIR_MISMATCH; + goto error_keep_entry; + } + + /* + * Do a local attach. We swap the consume and + * produce queues for the attacher and deliver + * an attach event. + */ + result = qp_notify_peer_local(true, *handle); + if (result < VMCI_SUCCESS) + goto error_keep_entry; + + my_produce_q = queue_pair_entry->consume_q; + my_consume_q = queue_pair_entry->produce_q; + goto out; + } + + result = VMCI_ERROR_ALREADY_EXISTS; + goto error_keep_entry; + } + + my_produce_q = qp_alloc_queue(produce_size, flags); + if (!my_produce_q) { + pr_warn("Error allocating pages for produce queue\n"); + result = VMCI_ERROR_NO_MEM; + goto error; + } + + my_consume_q = qp_alloc_queue(consume_size, flags); + if (!my_consume_q) { + pr_warn("Error allocating pages for consume queue\n"); + result = VMCI_ERROR_NO_MEM; + goto error; + } + + queue_pair_entry = qp_guest_endpoint_create(*handle, peer, flags, + produce_size, consume_size, + my_produce_q, my_consume_q); + if (!queue_pair_entry) { + pr_warn("Error allocating memory in %s\n", __func__); + result = VMCI_ERROR_NO_MEM; + goto error; + } + + result = qp_alloc_ppn_set(my_produce_q, num_produce_pages, my_consume_q, + num_consume_pages, + &queue_pair_entry->ppn_set); + if (result < VMCI_SUCCESS) { + pr_warn("qp_alloc_ppn_set failed\n"); + goto error; + } + + /* + * It's only necessary to notify the host if this queue pair will be + * attached to from another context. + */ + if (queue_pair_entry->qp.flags & VMCI_QPFLAG_LOCAL) { + /* Local create case. */ + u32 context_id = vmci_get_context_id(); + + /* + * Enforce similar checks on local queue pairs as we + * do for regular ones. The handle's context must + * match the creator or attacher context id (here they + * are both the current context id) and the + * attach-only flag cannot exist during create. We + * also ensure specified peer is this context or an + * invalid one. + */ + if (queue_pair_entry->qp.handle.context != context_id || + (queue_pair_entry->qp.peer != VMCI_INVALID_ID && + queue_pair_entry->qp.peer != context_id)) { + result = VMCI_ERROR_NO_ACCESS; + goto error; + } + + if (queue_pair_entry->qp.flags & VMCI_QPFLAG_ATTACH_ONLY) { + result = VMCI_ERROR_NOT_FOUND; + goto error; + } + } else { + result = qp_alloc_hypercall(queue_pair_entry); + if (result < VMCI_SUCCESS) { + pr_warn("qp_alloc_hypercall result = %d\n", result); + goto error; + } + } + + qp_init_queue_mutex((struct vmci_queue *)my_produce_q, + (struct vmci_queue *)my_consume_q); + + qp_list_add_entry(&qp_guest_endpoints, &queue_pair_entry->qp); + + out: + queue_pair_entry->qp.ref_count++; + *handle = queue_pair_entry->qp.handle; + *produce_q = (struct vmci_queue *)my_produce_q; + *consume_q = (struct vmci_queue *)my_consume_q; + + /* + * We should initialize the queue pair header pages on a local + * queue pair create. For non-local queue pairs, the + * hypervisor initializes the header pages in the create step. + */ + if ((queue_pair_entry->qp.flags & VMCI_QPFLAG_LOCAL) && + queue_pair_entry->qp.ref_count == 1) { + vmci_q_header_init((*produce_q)->q_header, *handle); + vmci_q_header_init((*consume_q)->q_header, *handle); + } + + mutex_unlock(&qp_guest_endpoints.mutex); + + return VMCI_SUCCESS; + + error: + mutex_unlock(&qp_guest_endpoints.mutex); + if (queue_pair_entry) { + /* The queues will be freed inside the destroy routine. */ + qp_guest_endpoint_destroy(queue_pair_entry); + } else { + qp_free_queue(my_produce_q, produce_size); + qp_free_queue(my_consume_q, consume_size); + } + return result; + + error_keep_entry: + /* This path should only be used when an existing entry was found. */ + mutex_unlock(&qp_guest_endpoints.mutex); + return result; +} + +/* + * The first endpoint issuing a queue pair allocation will create the state + * of the queue pair in the queue pair broker. + * + * If the creator is a guest, it will associate a VMX virtual address range + * with the queue pair as specified by the page_store. For compatibility with + * older VMX'en, that would use a separate step to set the VMX virtual + * address range, the virtual address range can be registered later using + * vmci_qp_broker_set_page_store. In that case, a page_store of NULL should be + * used. + * + * If the creator is the host, a page_store of NULL should be used as well, + * since the host is not able to supply a page store for the queue pair. + * + * For older VMX and host callers, the queue pair will be created in the + * VMCIQPB_CREATED_NO_MEM state, and for current VMX callers, it will be + * created in VMCOQPB_CREATED_MEM state. + */ +static int qp_broker_create(struct vmci_handle handle, + u32 peer, + u32 flags, + u32 priv_flags, + u64 produce_size, + u64 consume_size, + struct vmci_qp_page_store *page_store, + struct vmci_ctx *context, + vmci_event_release_cb wakeup_cb, + void *client_data, struct qp_broker_entry **ent) +{ + struct qp_broker_entry *entry = NULL; + const u32 context_id = vmci_ctx_get_id(context); + bool is_local = flags & VMCI_QPFLAG_LOCAL; + int result; + u64 guest_produce_size; + u64 guest_consume_size; + + /* Do not create if the caller asked not to. */ + if (flags & VMCI_QPFLAG_ATTACH_ONLY) + return VMCI_ERROR_NOT_FOUND; + + /* + * Creator's context ID should match handle's context ID or the creator + * must allow the context in handle's context ID as the "peer". + */ + if (handle.context != context_id && handle.context != peer) + return VMCI_ERROR_NO_ACCESS; + + if (VMCI_CONTEXT_IS_VM(context_id) && VMCI_CONTEXT_IS_VM(peer)) + return VMCI_ERROR_DST_UNREACHABLE; + + /* + * Creator's context ID for local queue pairs should match the + * peer, if a peer is specified. + */ + if (is_local && peer != VMCI_INVALID_ID && context_id != peer) + return VMCI_ERROR_NO_ACCESS; + + entry = kzalloc(sizeof(*entry), GFP_ATOMIC); + if (!entry) + return VMCI_ERROR_NO_MEM; + + if (vmci_ctx_get_id(context) == VMCI_HOST_CONTEXT_ID && !is_local) { + /* + * The queue pair broker entry stores values from the guest + * point of view, so a creating host side endpoint should swap + * produce and consume values -- unless it is a local queue + * pair, in which case no swapping is necessary, since the local + * attacher will swap queues. + */ + + guest_produce_size = consume_size; + guest_consume_size = produce_size; + } else { + guest_produce_size = produce_size; + guest_consume_size = consume_size; + } + + entry->qp.handle = handle; + entry->qp.peer = peer; + entry->qp.flags = flags; + entry->qp.produce_size = guest_produce_size; + entry->qp.consume_size = guest_consume_size; + entry->qp.ref_count = 1; + entry->create_id = context_id; + entry->attach_id = VMCI_INVALID_ID; + entry->state = VMCIQPB_NEW; + entry->require_trusted_attach = + !!(context->priv_flags & VMCI_PRIVILEGE_FLAG_RESTRICTED); + entry->created_by_trusted = + !!(priv_flags & VMCI_PRIVILEGE_FLAG_TRUSTED); + entry->vmci_page_files = false; + entry->wakeup_cb = wakeup_cb; + entry->client_data = client_data; + entry->produce_q = qp_host_alloc_queue(guest_produce_size); + if (entry->produce_q == NULL) { + result = VMCI_ERROR_NO_MEM; + goto error; + } + entry->consume_q = qp_host_alloc_queue(guest_consume_size); + if (entry->consume_q == NULL) { + result = VMCI_ERROR_NO_MEM; + goto error; + } + + qp_init_queue_mutex(entry->produce_q, entry->consume_q); + + INIT_LIST_HEAD(&entry->qp.list_item); + + if (is_local) { + u8 *tmp; + + entry->local_mem = kcalloc(QPE_NUM_PAGES(entry->qp), + PAGE_SIZE, GFP_KERNEL); + if (entry->local_mem == NULL) { + result = VMCI_ERROR_NO_MEM; + goto error; + } + entry->state = VMCIQPB_CREATED_MEM; + entry->produce_q->q_header = entry->local_mem; + tmp = (u8 *)entry->local_mem + PAGE_SIZE * + (DIV_ROUND_UP(entry->qp.produce_size, PAGE_SIZE) + 1); + entry->consume_q->q_header = (struct vmci_queue_header *)tmp; + } else if (page_store) { + /* + * The VMX already initialized the queue pair headers, so no + * need for the kernel side to do that. + */ + result = qp_host_register_user_memory(page_store, + entry->produce_q, + entry->consume_q); + if (result < VMCI_SUCCESS) + goto error; + + entry->state = VMCIQPB_CREATED_MEM; + } else { + /* + * A create without a page_store may be either a host + * side create (in which case we are waiting for the + * guest side to supply the memory) or an old style + * queue pair create (in which case we will expect a + * set page store call as the next step). + */ + entry->state = VMCIQPB_CREATED_NO_MEM; + } + + qp_list_add_entry(&qp_broker_list, &entry->qp); + if (ent != NULL) + *ent = entry; + + /* Add to resource obj */ + result = vmci_resource_add(&entry->resource, + VMCI_RESOURCE_TYPE_QPAIR_HOST, + handle); + if (result != VMCI_SUCCESS) { + pr_warn("Failed to add new resource (handle=0x%x:0x%x), error: %d", + handle.context, handle.resource, result); + goto error; + } + + entry->qp.handle = vmci_resource_handle(&entry->resource); + if (is_local) { + vmci_q_header_init(entry->produce_q->q_header, + entry->qp.handle); + vmci_q_header_init(entry->consume_q->q_header, + entry->qp.handle); + } + + vmci_ctx_qp_create(context, entry->qp.handle); + + return VMCI_SUCCESS; + + error: + if (entry != NULL) { + qp_host_free_queue(entry->produce_q, guest_produce_size); + qp_host_free_queue(entry->consume_q, guest_consume_size); + kfree(entry); + } + + return result; +} + +/* + * Enqueues an event datagram to notify the peer VM attached to + * the given queue pair handle about attach/detach event by the + * given VM. Returns Payload size of datagram enqueued on + * success, error code otherwise. + */ +static int qp_notify_peer(bool attach, + struct vmci_handle handle, + u32 my_id, + u32 peer_id) +{ + int rv; + struct vmci_event_qp ev; + + if (vmci_handle_is_invalid(handle) || my_id == VMCI_INVALID_ID || + peer_id == VMCI_INVALID_ID) + return VMCI_ERROR_INVALID_ARGS; + + /* + * In vmci_ctx_enqueue_datagram() we enforce the upper limit on + * number of pending events from the hypervisor to a given VM + * otherwise a rogue VM could do an arbitrary number of attach + * and detach operations causing memory pressure in the host + * kernel. + */ + + ev.msg.hdr.dst = vmci_make_handle(peer_id, VMCI_EVENT_HANDLER); + ev.msg.hdr.src = vmci_make_handle(VMCI_HYPERVISOR_CONTEXT_ID, + VMCI_CONTEXT_RESOURCE_ID); + ev.msg.hdr.payload_size = sizeof(ev) - sizeof(ev.msg.hdr); + ev.msg.event_data.event = attach ? + VMCI_EVENT_QP_PEER_ATTACH : VMCI_EVENT_QP_PEER_DETACH; + ev.payload.handle = handle; + ev.payload.peer_id = my_id; + + rv = vmci_datagram_dispatch(VMCI_HYPERVISOR_CONTEXT_ID, + &ev.msg.hdr, false); + if (rv < VMCI_SUCCESS) + pr_warn("Failed to enqueue queue_pair %s event datagram for context (ID=0x%x)\n", + attach ? "ATTACH" : "DETACH", peer_id); + + return rv; +} + +/* + * The second endpoint issuing a queue pair allocation will attach to + * the queue pair registered with the queue pair broker. + * + * If the attacher is a guest, it will associate a VMX virtual address + * range with the queue pair as specified by the page_store. At this + * point, the already attach host endpoint may start using the queue + * pair, and an attach event is sent to it. For compatibility with + * older VMX'en, that used a separate step to set the VMX virtual + * address range, the virtual address range can be registered later + * using vmci_qp_broker_set_page_store. In that case, a page_store of + * NULL should be used, and the attach event will be generated once + * the actual page store has been set. + * + * If the attacher is the host, a page_store of NULL should be used as + * well, since the page store information is already set by the guest. + * + * For new VMX and host callers, the queue pair will be moved to the + * VMCIQPB_ATTACHED_MEM state, and for older VMX callers, it will be + * moved to the VMCOQPB_ATTACHED_NO_MEM state. + */ +static int qp_broker_attach(struct qp_broker_entry *entry, + u32 peer, + u32 flags, + u32 priv_flags, + u64 produce_size, + u64 consume_size, + struct vmci_qp_page_store *page_store, + struct vmci_ctx *context, + vmci_event_release_cb wakeup_cb, + void *client_data, + struct qp_broker_entry **ent) +{ + const u32 context_id = vmci_ctx_get_id(context); + bool is_local = flags & VMCI_QPFLAG_LOCAL; + int result; + + if (entry->state != VMCIQPB_CREATED_NO_MEM && + entry->state != VMCIQPB_CREATED_MEM) + return VMCI_ERROR_UNAVAILABLE; + + if (is_local) { + if (!(entry->qp.flags & VMCI_QPFLAG_LOCAL) || + context_id != entry->create_id) { + return VMCI_ERROR_INVALID_ARGS; + } + } else if (context_id == entry->create_id || + context_id == entry->attach_id) { + return VMCI_ERROR_ALREADY_EXISTS; + } + + if (VMCI_CONTEXT_IS_VM(context_id) && + VMCI_CONTEXT_IS_VM(entry->create_id)) + return VMCI_ERROR_DST_UNREACHABLE; + + /* + * If we are attaching from a restricted context then the queuepair + * must have been created by a trusted endpoint. + */ + if ((context->priv_flags & VMCI_PRIVILEGE_FLAG_RESTRICTED) && + !entry->created_by_trusted) + return VMCI_ERROR_NO_ACCESS; + + /* + * If we are attaching to a queuepair that was created by a restricted + * context then we must be trusted. + */ + if (entry->require_trusted_attach && + (!(priv_flags & VMCI_PRIVILEGE_FLAG_TRUSTED))) + return VMCI_ERROR_NO_ACCESS; + + /* + * If the creator specifies VMCI_INVALID_ID in "peer" field, access + * control check is not performed. + */ + if (entry->qp.peer != VMCI_INVALID_ID && entry->qp.peer != context_id) + return VMCI_ERROR_NO_ACCESS; + + if (entry->create_id == VMCI_HOST_CONTEXT_ID) { + /* + * Do not attach if the caller doesn't support Host Queue Pairs + * and a host created this queue pair. + */ + + if (!vmci_ctx_supports_host_qp(context)) + return VMCI_ERROR_INVALID_RESOURCE; + + } else if (context_id == VMCI_HOST_CONTEXT_ID) { + struct vmci_ctx *create_context; + bool supports_host_qp; + + /* + * Do not attach a host to a user created queue pair if that + * user doesn't support host queue pair end points. + */ + + create_context = vmci_ctx_get(entry->create_id); + supports_host_qp = vmci_ctx_supports_host_qp(create_context); + vmci_ctx_put(create_context); + + if (!supports_host_qp) + return VMCI_ERROR_INVALID_RESOURCE; + } + + if ((entry->qp.flags & ~VMCI_QP_ASYMM) != (flags & ~VMCI_QP_ASYMM_PEER)) + return VMCI_ERROR_QUEUEPAIR_MISMATCH; + + if (context_id != VMCI_HOST_CONTEXT_ID) { + /* + * The queue pair broker entry stores values from the guest + * point of view, so an attaching guest should match the values + * stored in the entry. + */ + + if (entry->qp.produce_size != produce_size || + entry->qp.consume_size != consume_size) { + return VMCI_ERROR_QUEUEPAIR_MISMATCH; + } + } else if (entry->qp.produce_size != consume_size || + entry->qp.consume_size != produce_size) { + return VMCI_ERROR_QUEUEPAIR_MISMATCH; + } + + if (context_id != VMCI_HOST_CONTEXT_ID) { + /* + * If a guest attached to a queue pair, it will supply + * the backing memory. If this is a pre NOVMVM vmx, + * the backing memory will be supplied by calling + * vmci_qp_broker_set_page_store() following the + * return of the vmci_qp_broker_alloc() call. If it is + * a vmx of version NOVMVM or later, the page store + * must be supplied as part of the + * vmci_qp_broker_alloc call. Under all circumstances + * must the initially created queue pair not have any + * memory associated with it already. + */ + + if (entry->state != VMCIQPB_CREATED_NO_MEM) + return VMCI_ERROR_INVALID_ARGS; + + if (page_store != NULL) { + /* + * Patch up host state to point to guest + * supplied memory. The VMX already + * initialized the queue pair headers, so no + * need for the kernel side to do that. + */ + + result = qp_host_register_user_memory(page_store, + entry->produce_q, + entry->consume_q); + if (result < VMCI_SUCCESS) + return result; + + /* + * Preemptively load in the headers if non-blocking to + * prevent blocking later. + */ + if (entry->qp.flags & VMCI_QPFLAG_NONBLOCK) { + result = qp_host_map_queues(entry->produce_q, + entry->consume_q); + if (result < VMCI_SUCCESS) { + qp_host_unregister_user_memory( + entry->produce_q, + entry->consume_q); + return result; + } + } + + entry->state = VMCIQPB_ATTACHED_MEM; + } else { + entry->state = VMCIQPB_ATTACHED_NO_MEM; + } + } else if (entry->state == VMCIQPB_CREATED_NO_MEM) { + /* + * The host side is attempting to attach to a queue + * pair that doesn't have any memory associated with + * it. This must be a pre NOVMVM vmx that hasn't set + * the page store information yet, or a quiesced VM. + */ + + return VMCI_ERROR_UNAVAILABLE; + } else { + /* + * For non-blocking queue pairs, we cannot rely on + * enqueue/dequeue to map in the pages on the + * host-side, since it may block, so we make an + * attempt here. + */ + + if (flags & VMCI_QPFLAG_NONBLOCK) { + result = + qp_host_map_queues(entry->produce_q, + entry->consume_q); + if (result < VMCI_SUCCESS) + return result; + + entry->qp.flags |= flags & + (VMCI_QPFLAG_NONBLOCK | VMCI_QPFLAG_PINNED); + } + + /* The host side has successfully attached to a queue pair. */ + entry->state = VMCIQPB_ATTACHED_MEM; + } + + if (entry->state == VMCIQPB_ATTACHED_MEM) { + result = + qp_notify_peer(true, entry->qp.handle, context_id, + entry->create_id); + if (result < VMCI_SUCCESS) + pr_warn("Failed to notify peer (ID=0x%x) of attach to queue pair (handle=0x%x:0x%x)\n", + entry->create_id, entry->qp.handle.context, + entry->qp.handle.resource); + } + + entry->attach_id = context_id; + entry->qp.ref_count++; + if (wakeup_cb) { + entry->wakeup_cb = wakeup_cb; + entry->client_data = client_data; + } + + /* + * When attaching to local queue pairs, the context already has + * an entry tracking the queue pair, so don't add another one. + */ + if (!is_local) + vmci_ctx_qp_create(context, entry->qp.handle); + + if (ent != NULL) + *ent = entry; + + return VMCI_SUCCESS; +} + +/* + * queue_pair_Alloc for use when setting up queue pair endpoints + * on the host. + */ +static int qp_broker_alloc(struct vmci_handle handle, + u32 peer, + u32 flags, + u32 priv_flags, + u64 produce_size, + u64 consume_size, + struct vmci_qp_page_store *page_store, + struct vmci_ctx *context, + vmci_event_release_cb wakeup_cb, + void *client_data, + struct qp_broker_entry **ent, + bool *swap) +{ + const u32 context_id = vmci_ctx_get_id(context); + bool create; + struct qp_broker_entry *entry = NULL; + bool is_local = flags & VMCI_QPFLAG_LOCAL; + int result; + + if (vmci_handle_is_invalid(handle) || + (flags & ~VMCI_QP_ALL_FLAGS) || is_local || + !(produce_size || consume_size) || + !context || context_id == VMCI_INVALID_ID || + handle.context == VMCI_INVALID_ID) { + return VMCI_ERROR_INVALID_ARGS; + } + + if (page_store && !VMCI_QP_PAGESTORE_IS_WELLFORMED(page_store)) + return VMCI_ERROR_INVALID_ARGS; + + /* + * In the initial argument check, we ensure that non-vmkernel hosts + * are not allowed to create local queue pairs. + */ + + mutex_lock(&qp_broker_list.mutex); + + if (!is_local && vmci_ctx_qp_exists(context, handle)) { + pr_devel("Context (ID=0x%x) already attached to queue pair (handle=0x%x:0x%x)\n", + context_id, handle.context, handle.resource); + mutex_unlock(&qp_broker_list.mutex); + return VMCI_ERROR_ALREADY_EXISTS; + } + + if (handle.resource != VMCI_INVALID_ID) + entry = qp_broker_handle_to_entry(handle); + + if (!entry) { + create = true; + result = + qp_broker_create(handle, peer, flags, priv_flags, + produce_size, consume_size, page_store, + context, wakeup_cb, client_data, ent); + } else { + create = false; + result = + qp_broker_attach(entry, peer, flags, priv_flags, + produce_size, consume_size, page_store, + context, wakeup_cb, client_data, ent); + } + + mutex_unlock(&qp_broker_list.mutex); + + if (swap) + *swap = (context_id == VMCI_HOST_CONTEXT_ID) && + !(create && is_local); + + return result; +} + +/* + * This function implements the kernel API for allocating a queue + * pair. + */ +static int qp_alloc_host_work(struct vmci_handle *handle, + struct vmci_queue **produce_q, + u64 produce_size, + struct vmci_queue **consume_q, + u64 consume_size, + u32 peer, + u32 flags, + u32 priv_flags, + vmci_event_release_cb wakeup_cb, + void *client_data) +{ + struct vmci_handle new_handle; + struct vmci_ctx *context; + struct qp_broker_entry *entry; + int result; + bool swap; + + if (vmci_handle_is_invalid(*handle)) { + new_handle = vmci_make_handle( + VMCI_HOST_CONTEXT_ID, VMCI_INVALID_ID); + } else + new_handle = *handle; + + context = vmci_ctx_get(VMCI_HOST_CONTEXT_ID); + entry = NULL; + result = + qp_broker_alloc(new_handle, peer, flags, priv_flags, + produce_size, consume_size, NULL, context, + wakeup_cb, client_data, &entry, &swap); + if (result == VMCI_SUCCESS) { + if (swap) { + /* + * If this is a local queue pair, the attacher + * will swap around produce and consume + * queues. + */ + + *produce_q = entry->consume_q; + *consume_q = entry->produce_q; + } else { + *produce_q = entry->produce_q; + *consume_q = entry->consume_q; + } + + *handle = vmci_resource_handle(&entry->resource); + } else { + *handle = VMCI_INVALID_HANDLE; + pr_devel("queue pair broker failed to alloc (result=%d)\n", + result); + } + vmci_ctx_put(context); + return result; +} + +/* + * Allocates a VMCI queue_pair. Only checks validity of input + * arguments. The real work is done in the host or guest + * specific function. + */ +int vmci_qp_alloc(struct vmci_handle *handle, + struct vmci_queue **produce_q, + u64 produce_size, + struct vmci_queue **consume_q, + u64 consume_size, + u32 peer, + u32 flags, + u32 priv_flags, + bool guest_endpoint, + vmci_event_release_cb wakeup_cb, + void *client_data) +{ + if (!handle || !produce_q || !consume_q || + (!produce_size && !consume_size) || (flags & ~VMCI_QP_ALL_FLAGS)) + return VMCI_ERROR_INVALID_ARGS; + + if (guest_endpoint) { + return qp_alloc_guest_work(handle, produce_q, + produce_size, consume_q, + consume_size, peer, + flags, priv_flags); + } else { + return qp_alloc_host_work(handle, produce_q, + produce_size, consume_q, + consume_size, peer, flags, + priv_flags, wakeup_cb, client_data); + } +} + +/* + * This function implements the host kernel API for detaching from + * a queue pair. + */ +static int qp_detatch_host_work(struct vmci_handle handle) +{ + int result; + struct vmci_ctx *context; + + context = vmci_ctx_get(VMCI_HOST_CONTEXT_ID); + + result = vmci_qp_broker_detach(handle, context); + + vmci_ctx_put(context); + return result; +} + +/* + * Detaches from a VMCI queue_pair. Only checks validity of input argument. + * Real work is done in the host or guest specific function. + */ +static int qp_detatch(struct vmci_handle handle, bool guest_endpoint) +{ + if (vmci_handle_is_invalid(handle)) + return VMCI_ERROR_INVALID_ARGS; + + if (guest_endpoint) + return qp_detatch_guest_work(handle); + else + return qp_detatch_host_work(handle); +} + +/* + * Returns the entry from the head of the list. Assumes that the list is + * locked. + */ +static struct qp_entry *qp_list_get_head(struct qp_list *qp_list) +{ + if (!list_empty(&qp_list->head)) { + struct qp_entry *entry = + list_first_entry(&qp_list->head, struct qp_entry, + list_item); + return entry; + } + + return NULL; +} + +void vmci_qp_broker_exit(void) +{ + struct qp_entry *entry; + struct qp_broker_entry *be; + + mutex_lock(&qp_broker_list.mutex); + + while ((entry = qp_list_get_head(&qp_broker_list))) { + be = (struct qp_broker_entry *)entry; + + qp_list_remove_entry(&qp_broker_list, entry); + kfree(be); + } + + mutex_unlock(&qp_broker_list.mutex); +} + +/* + * Requests that a queue pair be allocated with the VMCI queue + * pair broker. Allocates a queue pair entry if one does not + * exist. Attaches to one if it exists, and retrieves the page + * files backing that queue_pair. Assumes that the queue pair + * broker lock is held. + */ +int vmci_qp_broker_alloc(struct vmci_handle handle, + u32 peer, + u32 flags, + u32 priv_flags, + u64 produce_size, + u64 consume_size, + struct vmci_qp_page_store *page_store, + struct vmci_ctx *context) +{ + return qp_broker_alloc(handle, peer, flags, priv_flags, + produce_size, consume_size, + page_store, context, NULL, NULL, NULL, NULL); +} + +/* + * VMX'en with versions lower than VMCI_VERSION_NOVMVM use a separate + * step to add the UVAs of the VMX mapping of the queue pair. This function + * provides backwards compatibility with such VMX'en, and takes care of + * registering the page store for a queue pair previously allocated by the + * VMX during create or attach. This function will move the queue pair state + * to either from VMCIQBP_CREATED_NO_MEM to VMCIQBP_CREATED_MEM or + * VMCIQBP_ATTACHED_NO_MEM to VMCIQBP_ATTACHED_MEM. If moving to the + * attached state with memory, the queue pair is ready to be used by the + * host peer, and an attached event will be generated. + * + * Assumes that the queue pair broker lock is held. + * + * This function is only used by the hosted platform, since there is no + * issue with backwards compatibility for vmkernel. + */ +int vmci_qp_broker_set_page_store(struct vmci_handle handle, + u64 produce_uva, + u64 consume_uva, + struct vmci_ctx *context) +{ + struct qp_broker_entry *entry; + int result; + const u32 context_id = vmci_ctx_get_id(context); + + if (vmci_handle_is_invalid(handle) || !context || + context_id == VMCI_INVALID_ID) + return VMCI_ERROR_INVALID_ARGS; + + /* + * We only support guest to host queue pairs, so the VMX must + * supply UVAs for the mapped page files. + */ + + if (produce_uva == 0 || consume_uva == 0) + return VMCI_ERROR_INVALID_ARGS; + + mutex_lock(&qp_broker_list.mutex); + + if (!vmci_ctx_qp_exists(context, handle)) { + pr_warn("Context (ID=0x%x) not attached to queue pair (handle=0x%x:0x%x)\n", + context_id, handle.context, handle.resource); + result = VMCI_ERROR_NOT_FOUND; + goto out; + } + + entry = qp_broker_handle_to_entry(handle); + if (!entry) { + result = VMCI_ERROR_NOT_FOUND; + goto out; + } + + /* + * If I'm the owner then I can set the page store. + * + * Or, if a host created the queue_pair and I'm the attached peer + * then I can set the page store. + */ + if (entry->create_id != context_id && + (entry->create_id != VMCI_HOST_CONTEXT_ID || + entry->attach_id != context_id)) { + result = VMCI_ERROR_QUEUEPAIR_NOTOWNER; + goto out; + } + + if (entry->state != VMCIQPB_CREATED_NO_MEM && + entry->state != VMCIQPB_ATTACHED_NO_MEM) { + result = VMCI_ERROR_UNAVAILABLE; + goto out; + } + + result = qp_host_get_user_memory(produce_uva, consume_uva, + entry->produce_q, entry->consume_q); + if (result < VMCI_SUCCESS) + goto out; + + result = qp_host_map_queues(entry->produce_q, entry->consume_q); + if (result < VMCI_SUCCESS) { + qp_host_unregister_user_memory(entry->produce_q, + entry->consume_q); + goto out; + } + + if (entry->state == VMCIQPB_CREATED_NO_MEM) + entry->state = VMCIQPB_CREATED_MEM; + else + entry->state = VMCIQPB_ATTACHED_MEM; + + entry->vmci_page_files = true; + + if (entry->state == VMCIQPB_ATTACHED_MEM) { + result = + qp_notify_peer(true, handle, context_id, entry->create_id); + if (result < VMCI_SUCCESS) { + pr_warn("Failed to notify peer (ID=0x%x) of attach to queue pair (handle=0x%x:0x%x)\n", + entry->create_id, entry->qp.handle.context, + entry->qp.handle.resource); + } + } + + result = VMCI_SUCCESS; + out: + mutex_unlock(&qp_broker_list.mutex); + return result; +} + +/* + * Resets saved queue headers for the given QP broker + * entry. Should be used when guest memory becomes available + * again, or the guest detaches. + */ +static void qp_reset_saved_headers(struct qp_broker_entry *entry) +{ + entry->produce_q->saved_header = NULL; + entry->consume_q->saved_header = NULL; +} + +/* + * The main entry point for detaching from a queue pair registered with the + * queue pair broker. If more than one endpoint is attached to the queue + * pair, the first endpoint will mainly decrement a reference count and + * generate a notification to its peer. The last endpoint will clean up + * the queue pair state registered with the broker. + * + * When a guest endpoint detaches, it will unmap and unregister the guest + * memory backing the queue pair. If the host is still attached, it will + * no longer be able to access the queue pair content. + * + * If the queue pair is already in a state where there is no memory + * registered for the queue pair (any *_NO_MEM state), it will transition to + * the VMCIQPB_SHUTDOWN_NO_MEM state. This will also happen, if a guest + * endpoint is the first of two endpoints to detach. If the host endpoint is + * the first out of two to detach, the queue pair will move to the + * VMCIQPB_SHUTDOWN_MEM state. + */ +int vmci_qp_broker_detach(struct vmci_handle handle, struct vmci_ctx *context) +{ + struct qp_broker_entry *entry; + const u32 context_id = vmci_ctx_get_id(context); + u32 peer_id; + bool is_local = false; + int result; + + if (vmci_handle_is_invalid(handle) || !context || + context_id == VMCI_INVALID_ID) { + return VMCI_ERROR_INVALID_ARGS; + } + + mutex_lock(&qp_broker_list.mutex); + + if (!vmci_ctx_qp_exists(context, handle)) { + pr_devel("Context (ID=0x%x) not attached to queue pair (handle=0x%x:0x%x)\n", + context_id, handle.context, handle.resource); + result = VMCI_ERROR_NOT_FOUND; + goto out; + } + + entry = qp_broker_handle_to_entry(handle); + if (!entry) { + pr_devel("Context (ID=0x%x) reports being attached to queue pair(handle=0x%x:0x%x) that isn't present in broker\n", + context_id, handle.context, handle.resource); + result = VMCI_ERROR_NOT_FOUND; + goto out; + } + + if (context_id != entry->create_id && context_id != entry->attach_id) { + result = VMCI_ERROR_QUEUEPAIR_NOTATTACHED; + goto out; + } + + if (context_id == entry->create_id) { + peer_id = entry->attach_id; + entry->create_id = VMCI_INVALID_ID; + } else { + peer_id = entry->create_id; + entry->attach_id = VMCI_INVALID_ID; + } + entry->qp.ref_count--; + + is_local = entry->qp.flags & VMCI_QPFLAG_LOCAL; + + if (context_id != VMCI_HOST_CONTEXT_ID) { + bool headers_mapped; + + /* + * Pre NOVMVM vmx'en may detach from a queue pair + * before setting the page store, and in that case + * there is no user memory to detach from. Also, more + * recent VMX'en may detach from a queue pair in the + * quiesced state. + */ + + qp_acquire_queue_mutex(entry->produce_q); + headers_mapped = entry->produce_q->q_header || + entry->consume_q->q_header; + if (QPBROKERSTATE_HAS_MEM(entry)) { + result = + qp_host_unmap_queues(INVALID_VMCI_GUEST_MEM_ID, + entry->produce_q, + entry->consume_q); + if (result < VMCI_SUCCESS) + pr_warn("Failed to unmap queue headers for queue pair (handle=0x%x:0x%x,result=%d)\n", + handle.context, handle.resource, + result); + + if (entry->vmci_page_files) + qp_host_unregister_user_memory(entry->produce_q, + entry-> + consume_q); + else + qp_host_unregister_user_memory(entry->produce_q, + entry-> + consume_q); + + } + + if (!headers_mapped) + qp_reset_saved_headers(entry); + + qp_release_queue_mutex(entry->produce_q); + + if (!headers_mapped && entry->wakeup_cb) + entry->wakeup_cb(entry->client_data); + + } else { + if (entry->wakeup_cb) { + entry->wakeup_cb = NULL; + entry->client_data = NULL; + } + } + + if (entry->qp.ref_count == 0) { + qp_list_remove_entry(&qp_broker_list, &entry->qp); + + if (is_local) + kfree(entry->local_mem); + + qp_cleanup_queue_mutex(entry->produce_q, entry->consume_q); + qp_host_free_queue(entry->produce_q, entry->qp.produce_size); + qp_host_free_queue(entry->consume_q, entry->qp.consume_size); + /* Unlink from resource hash table and free callback */ + vmci_resource_remove(&entry->resource); + + kfree(entry); + + vmci_ctx_qp_destroy(context, handle); + } else { + qp_notify_peer(false, handle, context_id, peer_id); + if (context_id == VMCI_HOST_CONTEXT_ID && + QPBROKERSTATE_HAS_MEM(entry)) { + entry->state = VMCIQPB_SHUTDOWN_MEM; + } else { + entry->state = VMCIQPB_SHUTDOWN_NO_MEM; + } + + if (!is_local) + vmci_ctx_qp_destroy(context, handle); + + } + result = VMCI_SUCCESS; + out: + mutex_unlock(&qp_broker_list.mutex); + return result; +} + +/* + * Establishes the necessary mappings for a queue pair given a + * reference to the queue pair guest memory. This is usually + * called when a guest is unquiesced and the VMX is allowed to + * map guest memory once again. + */ +int vmci_qp_broker_map(struct vmci_handle handle, + struct vmci_ctx *context, + u64 guest_mem) +{ + struct qp_broker_entry *entry; + const u32 context_id = vmci_ctx_get_id(context); + bool is_local = false; + int result; + + if (vmci_handle_is_invalid(handle) || !context || + context_id == VMCI_INVALID_ID) + return VMCI_ERROR_INVALID_ARGS; + + mutex_lock(&qp_broker_list.mutex); + + if (!vmci_ctx_qp_exists(context, handle)) { + pr_devel("Context (ID=0x%x) not attached to queue pair (handle=0x%x:0x%x)\n", + context_id, handle.context, handle.resource); + result = VMCI_ERROR_NOT_FOUND; + goto out; + } + + entry = qp_broker_handle_to_entry(handle); + if (!entry) { + pr_devel("Context (ID=0x%x) reports being attached to queue pair (handle=0x%x:0x%x) that isn't present in broker\n", + context_id, handle.context, handle.resource); + result = VMCI_ERROR_NOT_FOUND; + goto out; + } + + if (context_id != entry->create_id && context_id != entry->attach_id) { + result = VMCI_ERROR_QUEUEPAIR_NOTATTACHED; + goto out; + } + + is_local = entry->qp.flags & VMCI_QPFLAG_LOCAL; + result = VMCI_SUCCESS; + + if (context_id != VMCI_HOST_CONTEXT_ID) { + struct vmci_qp_page_store page_store; + + page_store.pages = guest_mem; + page_store.len = QPE_NUM_PAGES(entry->qp); + + qp_acquire_queue_mutex(entry->produce_q); + qp_reset_saved_headers(entry); + result = + qp_host_register_user_memory(&page_store, + entry->produce_q, + entry->consume_q); + qp_release_queue_mutex(entry->produce_q); + if (result == VMCI_SUCCESS) { + /* Move state from *_NO_MEM to *_MEM */ + + entry->state++; + + if (entry->wakeup_cb) + entry->wakeup_cb(entry->client_data); + } + } + + out: + mutex_unlock(&qp_broker_list.mutex); + return result; +} + +/* + * Saves a snapshot of the queue headers for the given QP broker + * entry. Should be used when guest memory is unmapped. + * Results: + * VMCI_SUCCESS on success, appropriate error code if guest memory + * can't be accessed.. + */ +static int qp_save_headers(struct qp_broker_entry *entry) +{ + int result; + + if (entry->produce_q->saved_header != NULL && + entry->consume_q->saved_header != NULL) { + /* + * If the headers have already been saved, we don't need to do + * it again, and we don't want to map in the headers + * unnecessarily. + */ + + return VMCI_SUCCESS; + } + + if (NULL == entry->produce_q->q_header || + NULL == entry->consume_q->q_header) { + result = qp_host_map_queues(entry->produce_q, entry->consume_q); + if (result < VMCI_SUCCESS) + return result; + } + + memcpy(&entry->saved_produce_q, entry->produce_q->q_header, + sizeof(entry->saved_produce_q)); + entry->produce_q->saved_header = &entry->saved_produce_q; + memcpy(&entry->saved_consume_q, entry->consume_q->q_header, + sizeof(entry->saved_consume_q)); + entry->consume_q->saved_header = &entry->saved_consume_q; + + return VMCI_SUCCESS; +} + +/* + * Removes all references to the guest memory of a given queue pair, and + * will move the queue pair from state *_MEM to *_NO_MEM. It is usually + * called when a VM is being quiesced where access to guest memory should + * avoided. + */ +int vmci_qp_broker_unmap(struct vmci_handle handle, + struct vmci_ctx *context, + u32 gid) +{ + struct qp_broker_entry *entry; + const u32 context_id = vmci_ctx_get_id(context); + bool is_local = false; + int result; + + if (vmci_handle_is_invalid(handle) || !context || + context_id == VMCI_INVALID_ID) + return VMCI_ERROR_INVALID_ARGS; + + mutex_lock(&qp_broker_list.mutex); + + if (!vmci_ctx_qp_exists(context, handle)) { + pr_devel("Context (ID=0x%x) not attached to queue pair (handle=0x%x:0x%x)\n", + context_id, handle.context, handle.resource); + result = VMCI_ERROR_NOT_FOUND; + goto out; + } + + entry = qp_broker_handle_to_entry(handle); + if (!entry) { + pr_devel("Context (ID=0x%x) reports being attached to queue pair (handle=0x%x:0x%x) that isn't present in broker\n", + context_id, handle.context, handle.resource); + result = VMCI_ERROR_NOT_FOUND; + goto out; + } + + if (context_id != entry->create_id && context_id != entry->attach_id) { + result = VMCI_ERROR_QUEUEPAIR_NOTATTACHED; + goto out; + } + + is_local = entry->qp.flags & VMCI_QPFLAG_LOCAL; + + if (context_id != VMCI_HOST_CONTEXT_ID) { + qp_acquire_queue_mutex(entry->produce_q); + result = qp_save_headers(entry); + if (result < VMCI_SUCCESS) + pr_warn("Failed to save queue headers for queue pair (handle=0x%x:0x%x,result=%d)\n", + handle.context, handle.resource, result); + + qp_host_unmap_queues(gid, entry->produce_q, entry->consume_q); + + /* + * On hosted, when we unmap queue pairs, the VMX will also + * unmap the guest memory, so we invalidate the previously + * registered memory. If the queue pair is mapped again at a + * later point in time, we will need to reregister the user + * memory with a possibly new user VA. + */ + qp_host_unregister_user_memory(entry->produce_q, + entry->consume_q); + + /* + * Move state from *_MEM to *_NO_MEM. + */ + entry->state--; + + qp_release_queue_mutex(entry->produce_q); + } + + result = VMCI_SUCCESS; + + out: + mutex_unlock(&qp_broker_list.mutex); + return result; +} + +/* + * Destroys all guest queue pair endpoints. If active guest queue + * pairs still exist, hypercalls to attempt detach from these + * queue pairs will be made. Any failure to detach is silently + * ignored. + */ +void vmci_qp_guest_endpoints_exit(void) +{ + struct qp_entry *entry; + struct qp_guest_endpoint *ep; + + mutex_lock(&qp_guest_endpoints.mutex); + + while ((entry = qp_list_get_head(&qp_guest_endpoints))) { + ep = (struct qp_guest_endpoint *)entry; + + /* Don't make a hypercall for local queue_pairs. */ + if (!(entry->flags & VMCI_QPFLAG_LOCAL)) + qp_detatch_hypercall(entry->handle); + + /* We cannot fail the exit, so let's reset ref_count. */ + entry->ref_count = 0; + qp_list_remove_entry(&qp_guest_endpoints, entry); + + qp_guest_endpoint_destroy(ep); + } + + mutex_unlock(&qp_guest_endpoints.mutex); +} + +/* + * Helper routine that will lock the queue pair before subsequent + * operations. + * Note: Non-blocking on the host side is currently only implemented in ESX. + * Since non-blocking isn't yet implemented on the host personality we + * have no reason to acquire a spin lock. So to avoid the use of an + * unnecessary lock only acquire the mutex if we can block. + * Note: It is assumed that QPFLAG_PINNED implies QPFLAG_NONBLOCK. Therefore + * we can use the same locking function for access to both the queue + * and the queue headers as it is the same logic. Assert this behvior. + */ +static void qp_lock(const struct vmci_qp *qpair) +{ + if (vmci_can_block(qpair->flags)) + qp_acquire_queue_mutex(qpair->produce_q); +} + +/* + * Helper routine that unlocks the queue pair after calling + * qp_lock. Respects non-blocking and pinning flags. + */ +static void qp_unlock(const struct vmci_qp *qpair) +{ + if (vmci_can_block(qpair->flags)) + qp_release_queue_mutex(qpair->produce_q); +} + +/* + * The queue headers may not be mapped at all times. If a queue is + * currently not mapped, it will be attempted to do so. + */ +static int qp_map_queue_headers(struct vmci_queue *produce_q, + struct vmci_queue *consume_q, + bool can_block) +{ + int result; + + if (NULL == produce_q->q_header || NULL == consume_q->q_header) { + if (can_block) + result = qp_host_map_queues(produce_q, consume_q); + else + result = VMCI_ERROR_QUEUEPAIR_NOT_READY; + + if (result < VMCI_SUCCESS) + return (produce_q->saved_header && + consume_q->saved_header) ? + VMCI_ERROR_QUEUEPAIR_NOT_READY : + VMCI_ERROR_QUEUEPAIR_NOTATTACHED; + } + + return VMCI_SUCCESS; +} + +/* + * Helper routine that will retrieve the produce and consume + * headers of a given queue pair. If the guest memory of the + * queue pair is currently not available, the saved queue headers + * will be returned, if these are available. + */ +static int qp_get_queue_headers(const struct vmci_qp *qpair, + struct vmci_queue_header **produce_q_header, + struct vmci_queue_header **consume_q_header) +{ + int result; + + result = qp_map_queue_headers(qpair->produce_q, qpair->consume_q, + vmci_can_block(qpair->flags)); + if (result == VMCI_SUCCESS) { + *produce_q_header = qpair->produce_q->q_header; + *consume_q_header = qpair->consume_q->q_header; + } else if (qpair->produce_q->saved_header && + qpair->consume_q->saved_header) { + *produce_q_header = qpair->produce_q->saved_header; + *consume_q_header = qpair->consume_q->saved_header; + result = VMCI_SUCCESS; + } + + return result; +} + +/* + * Callback from VMCI queue pair broker indicating that a queue + * pair that was previously not ready, now either is ready or + * gone forever. + */ +static int qp_wakeup_cb(void *client_data) +{ + struct vmci_qp *qpair = (struct vmci_qp *)client_data; + + qp_lock(qpair); + while (qpair->blocked > 0) { + qpair->blocked--; + qpair->generation++; + wake_up(&qpair->event); + } + qp_unlock(qpair); + + return VMCI_SUCCESS; +} + +/* + * Makes the calling thread wait for the queue pair to become + * ready for host side access. Returns true when thread is + * woken up after queue pair state change, false otherwise. + */ +static bool qp_wait_for_ready_queue(struct vmci_qp *qpair) +{ + unsigned int generation; + + if (qpair->flags & VMCI_QPFLAG_NONBLOCK) + return false; + + qpair->blocked++; + generation = qpair->generation; + qp_unlock(qpair); + wait_event(qpair->event, generation != qpair->generation); + qp_lock(qpair); + + return true; +} + +/* + * Enqueues a given buffer to the produce queue using the provided + * function. As many bytes as possible (space available in the queue) + * are enqueued. Assumes the queue->mutex has been acquired. Returns + * VMCI_ERROR_QUEUEPAIR_NOSPACE if no space was available to enqueue + * data, VMCI_ERROR_INVALID_SIZE, if any queue pointer is outside the + * queue (as defined by the queue size), VMCI_ERROR_INVALID_ARGS, if + * an error occured when accessing the buffer, + * VMCI_ERROR_QUEUEPAIR_NOTATTACHED, if the queue pair pages aren't + * available. Otherwise, the number of bytes written to the queue is + * returned. Updates the tail pointer of the produce queue. + */ +static ssize_t qp_enqueue_locked(struct vmci_queue *produce_q, + struct vmci_queue *consume_q, + const u64 produce_q_size, + const void *buf, + size_t buf_size, + vmci_memcpy_to_queue_func memcpy_to_queue, + bool can_block) +{ + s64 free_space; + u64 tail; + size_t written; + ssize_t result; + + result = qp_map_queue_headers(produce_q, consume_q, can_block); + if (unlikely(result != VMCI_SUCCESS)) + return result; + + free_space = vmci_q_header_free_space(produce_q->q_header, + consume_q->q_header, + produce_q_size); + if (free_space == 0) + return VMCI_ERROR_QUEUEPAIR_NOSPACE; + + if (free_space < VMCI_SUCCESS) + return (ssize_t) free_space; + + written = (size_t) (free_space > buf_size ? buf_size : free_space); + tail = vmci_q_header_producer_tail(produce_q->q_header); + if (likely(tail + written < produce_q_size)) { + result = memcpy_to_queue(produce_q, tail, buf, 0, written); + } else { + /* Tail pointer wraps around. */ + + const size_t tmp = (size_t) (produce_q_size - tail); + + result = memcpy_to_queue(produce_q, tail, buf, 0, tmp); + if (result >= VMCI_SUCCESS) + result = memcpy_to_queue(produce_q, 0, buf, tmp, + written - tmp); + } + + if (result < VMCI_SUCCESS) + return result; + + vmci_q_header_add_producer_tail(produce_q->q_header, written, + produce_q_size); + return written; +} + +/* + * Dequeues data (if available) from the given consume queue. Writes data + * to the user provided buffer using the provided function. + * Assumes the queue->mutex has been acquired. + * Results: + * VMCI_ERROR_QUEUEPAIR_NODATA if no data was available to dequeue. + * VMCI_ERROR_INVALID_SIZE, if any queue pointer is outside the queue + * (as defined by the queue size). + * VMCI_ERROR_INVALID_ARGS, if an error occured when accessing the buffer. + * Otherwise the number of bytes dequeued is returned. + * Side effects: + * Updates the head pointer of the consume queue. + */ +static ssize_t qp_dequeue_locked(struct vmci_queue *produce_q, + struct vmci_queue *consume_q, + const u64 consume_q_size, + void *buf, + size_t buf_size, + vmci_memcpy_from_queue_func memcpy_from_queue, + bool update_consumer, + bool can_block) +{ + s64 buf_ready; + u64 head; + size_t read; + ssize_t result; + + result = qp_map_queue_headers(produce_q, consume_q, can_block); + if (unlikely(result != VMCI_SUCCESS)) + return result; + + buf_ready = vmci_q_header_buf_ready(consume_q->q_header, + produce_q->q_header, + consume_q_size); + if (buf_ready == 0) + return VMCI_ERROR_QUEUEPAIR_NODATA; + + if (buf_ready < VMCI_SUCCESS) + return (ssize_t) buf_ready; + + read = (size_t) (buf_ready > buf_size ? buf_size : buf_ready); + head = vmci_q_header_consumer_head(produce_q->q_header); + if (likely(head + read < consume_q_size)) { + result = memcpy_from_queue(buf, 0, consume_q, head, read); + } else { + /* Head pointer wraps around. */ + + const size_t tmp = (size_t) (consume_q_size - head); + + result = memcpy_from_queue(buf, 0, consume_q, head, tmp); + if (result >= VMCI_SUCCESS) + result = memcpy_from_queue(buf, tmp, consume_q, 0, + read - tmp); + + } + + if (result < VMCI_SUCCESS) + return result; + + if (update_consumer) + vmci_q_header_add_consumer_head(produce_q->q_header, + read, consume_q_size); + + return read; +} + +/* + * vmci_qpair_alloc() - Allocates a queue pair. + * @qpair: Pointer for the new vmci_qp struct. + * @handle: Handle to track the resource. + * @produce_qsize: Desired size of the producer queue. + * @consume_qsize: Desired size of the consumer queue. + * @peer: ContextID of the peer. + * @flags: VMCI flags. + * @priv_flags: VMCI priviledge flags. + * + * This is the client interface for allocating the memory for a + * vmci_qp structure and then attaching to the underlying + * queue. If an error occurs allocating the memory for the + * vmci_qp structure no attempt is made to attach. If an + * error occurs attaching, then the structure is freed. + */ +int vmci_qpair_alloc(struct vmci_qp **qpair, + struct vmci_handle *handle, + u64 produce_qsize, + u64 consume_qsize, + u32 peer, + u32 flags, + u32 priv_flags) +{ + struct vmci_qp *my_qpair; + int retval; + struct vmci_handle src = VMCI_INVALID_HANDLE; + struct vmci_handle dst = vmci_make_handle(peer, VMCI_INVALID_ID); + enum vmci_route route; + vmci_event_release_cb wakeup_cb; + void *client_data; + + /* + * Restrict the size of a queuepair. The device already + * enforces a limit on the total amount of memory that can be + * allocated to queuepairs for a guest. However, we try to + * allocate this memory before we make the queuepair + * allocation hypercall. On Linux, we allocate each page + * separately, which means rather than fail, the guest will + * thrash while it tries to allocate, and will become + * increasingly unresponsive to the point where it appears to + * be hung. So we place a limit on the size of an individual + * queuepair here, and leave the device to enforce the + * restriction on total queuepair memory. (Note that this + * doesn't prevent all cases; a user with only this much + * physical memory could still get into trouble.) The error + * used by the device is NO_RESOURCES, so use that here too. + */ + + if (produce_qsize + consume_qsize < max(produce_qsize, consume_qsize) || + produce_qsize + consume_qsize > VMCI_MAX_GUEST_QP_MEMORY) + return VMCI_ERROR_NO_RESOURCES; + + retval = vmci_route(&src, &dst, false, &route); + if (retval < VMCI_SUCCESS) + route = vmci_guest_code_active() ? + VMCI_ROUTE_AS_GUEST : VMCI_ROUTE_AS_HOST; + + /* If NONBLOCK or PINNED is set, we better be the guest personality. */ + if ((!vmci_can_block(flags) || vmci_qp_pinned(flags)) && + VMCI_ROUTE_AS_GUEST != route) { + pr_devel("Not guest personality w/ NONBLOCK OR PINNED set"); + return VMCI_ERROR_INVALID_ARGS; + } + + /* + * Limit the size of pinned QPs and check sanity. + * + * Pinned pages implies non-blocking mode. Mutexes aren't acquired + * when the NONBLOCK flag is set in qpair code; and also should not be + * acquired when the PINNED flagged is set. Since pinning pages + * implies we want speed, it makes no sense not to have NONBLOCK + * set if PINNED is set. Hence enforce this implication. + */ + if (vmci_qp_pinned(flags)) { + if (vmci_can_block(flags)) { + pr_err("Attempted to enable pinning w/o non-blocking"); + return VMCI_ERROR_INVALID_ARGS; + } + + if (produce_qsize + consume_qsize > VMCI_MAX_PINNED_QP_MEMORY) + return VMCI_ERROR_NO_RESOURCES; + } + + my_qpair = kzalloc(sizeof(*my_qpair), GFP_KERNEL); + if (!my_qpair) + return VMCI_ERROR_NO_MEM; + + my_qpair->produce_q_size = produce_qsize; + my_qpair->consume_q_size = consume_qsize; + my_qpair->peer = peer; + my_qpair->flags = flags; + my_qpair->priv_flags = priv_flags; + + wakeup_cb = NULL; + client_data = NULL; + + if (VMCI_ROUTE_AS_HOST == route) { + my_qpair->guest_endpoint = false; + if (!(flags & VMCI_QPFLAG_LOCAL)) { + my_qpair->blocked = 0; + my_qpair->generation = 0; + init_waitqueue_head(&my_qpair->event); + wakeup_cb = qp_wakeup_cb; + client_data = (void *)my_qpair; + } + } else { + my_qpair->guest_endpoint = true; + } + + retval = vmci_qp_alloc(handle, + &my_qpair->produce_q, + my_qpair->produce_q_size, + &my_qpair->consume_q, + my_qpair->consume_q_size, + my_qpair->peer, + my_qpair->flags, + my_qpair->priv_flags, + my_qpair->guest_endpoint, + wakeup_cb, client_data); + + if (retval < VMCI_SUCCESS) { + kfree(my_qpair); + return retval; + } + + *qpair = my_qpair; + my_qpair->handle = *handle; + + return retval; +} +EXPORT_SYMBOL_GPL(vmci_qpair_alloc); + +/* + * vmci_qpair_detach() - Detatches the client from a queue pair. + * @qpair: Reference of a pointer to the qpair struct. + * + * This is the client interface for detaching from a VMCIQPair. + * Note that this routine will free the memory allocated for the + * vmci_qp structure too. + */ +int vmci_qpair_detach(struct vmci_qp **qpair) +{ + int result; + struct vmci_qp *old_qpair; + + if (!qpair || !(*qpair)) + return VMCI_ERROR_INVALID_ARGS; + + old_qpair = *qpair; + result = qp_detatch(old_qpair->handle, old_qpair->guest_endpoint); + + /* + * The guest can fail to detach for a number of reasons, and + * if it does so, it will cleanup the entry (if there is one). + * The host can fail too, but it won't cleanup the entry + * immediately, it will do that later when the context is + * freed. Either way, we need to release the qpair struct + * here; there isn't much the caller can do, and we don't want + * to leak. + */ + + memset(old_qpair, 0, sizeof(*old_qpair)); + old_qpair->handle = VMCI_INVALID_HANDLE; + old_qpair->peer = VMCI_INVALID_ID; + kfree(old_qpair); + *qpair = NULL; + + return result; +} +EXPORT_SYMBOL_GPL(vmci_qpair_detach); + +/* + * vmci_qpair_get_produce_indexes() - Retrieves the indexes of the producer. + * @qpair: Pointer to the queue pair struct. + * @producer_tail: Reference used for storing producer tail index. + * @consumer_head: Reference used for storing the consumer head index. + * + * This is the client interface for getting the current indexes of the + * QPair from the point of the view of the caller as the producer. + */ +int vmci_qpair_get_produce_indexes(const struct vmci_qp *qpair, + u64 *producer_tail, + u64 *consumer_head) +{ + struct vmci_queue_header *produce_q_header; + struct vmci_queue_header *consume_q_header; + int result; + + if (!qpair) + return VMCI_ERROR_INVALID_ARGS; + + qp_lock(qpair); + result = + qp_get_queue_headers(qpair, &produce_q_header, &consume_q_header); + if (result == VMCI_SUCCESS) + vmci_q_header_get_pointers(produce_q_header, consume_q_header, + producer_tail, consumer_head); + qp_unlock(qpair); + + if (result == VMCI_SUCCESS && + ((producer_tail && *producer_tail >= qpair->produce_q_size) || + (consumer_head && *consumer_head >= qpair->produce_q_size))) + return VMCI_ERROR_INVALID_SIZE; + + return result; +} +EXPORT_SYMBOL_GPL(vmci_qpair_get_produce_indexes); + +/* + * vmci_qpair_get_consume_indexes() - Retrieves the indexes of the comsumer. + * @qpair: Pointer to the queue pair struct. + * @consumer_tail: Reference used for storing consumer tail index. + * @producer_head: Reference used for storing the producer head index. + * + * This is the client interface for getting the current indexes of the + * QPair from the point of the view of the caller as the consumer. + */ +int vmci_qpair_get_consume_indexes(const struct vmci_qp *qpair, + u64 *consumer_tail, + u64 *producer_head) +{ + struct vmci_queue_header *produce_q_header; + struct vmci_queue_header *consume_q_header; + int result; + + if (!qpair) + return VMCI_ERROR_INVALID_ARGS; + + qp_lock(qpair); + result = + qp_get_queue_headers(qpair, &produce_q_header, &consume_q_header); + if (result == VMCI_SUCCESS) + vmci_q_header_get_pointers(consume_q_header, produce_q_header, + consumer_tail, producer_head); + qp_unlock(qpair); + + if (result == VMCI_SUCCESS && + ((consumer_tail && *consumer_tail >= qpair->consume_q_size) || + (producer_head && *producer_head >= qpair->consume_q_size))) + return VMCI_ERROR_INVALID_SIZE; + + return result; +} +EXPORT_SYMBOL_GPL(vmci_qpair_get_consume_indexes); + +/* + * vmci_qpair_produce_free_space() - Retrieves free space in producer queue. + * @qpair: Pointer to the queue pair struct. + * + * This is the client interface for getting the amount of free + * space in the QPair from the point of the view of the caller as + * the producer which is the common case. Returns < 0 if err, else + * available bytes into which data can be enqueued if > 0. + */ +s64 vmci_qpair_produce_free_space(const struct vmci_qp *qpair) +{ + struct vmci_queue_header *produce_q_header; + struct vmci_queue_header *consume_q_header; + s64 result; + + if (!qpair) + return VMCI_ERROR_INVALID_ARGS; + + qp_lock(qpair); + result = + qp_get_queue_headers(qpair, &produce_q_header, &consume_q_header); + if (result == VMCI_SUCCESS) + result = vmci_q_header_free_space(produce_q_header, + consume_q_header, + qpair->produce_q_size); + else + result = 0; + + qp_unlock(qpair); + + return result; +} +EXPORT_SYMBOL_GPL(vmci_qpair_produce_free_space); + +/* + * vmci_qpair_consume_free_space() - Retrieves free space in consumer queue. + * @qpair: Pointer to the queue pair struct. + * + * This is the client interface for getting the amount of free + * space in the QPair from the point of the view of the caller as + * the consumer which is not the common case. Returns < 0 if err, else + * available bytes into which data can be enqueued if > 0. + */ +s64 vmci_qpair_consume_free_space(const struct vmci_qp *qpair) +{ + struct vmci_queue_header *produce_q_header; + struct vmci_queue_header *consume_q_header; + s64 result; + + if (!qpair) + return VMCI_ERROR_INVALID_ARGS; + + qp_lock(qpair); + result = + qp_get_queue_headers(qpair, &produce_q_header, &consume_q_header); + if (result == VMCI_SUCCESS) + result = vmci_q_header_free_space(consume_q_header, + produce_q_header, + qpair->consume_q_size); + else + result = 0; + + qp_unlock(qpair); + + return result; +} +EXPORT_SYMBOL_GPL(vmci_qpair_consume_free_space); + +/* + * vmci_qpair_produce_buf_ready() - Gets bytes ready to read from + * producer queue. + * @qpair: Pointer to the queue pair struct. + * + * This is the client interface for getting the amount of + * enqueued data in the QPair from the point of the view of the + * caller as the producer which is not the common case. Returns < 0 if err, + * else available bytes that may be read. + */ +s64 vmci_qpair_produce_buf_ready(const struct vmci_qp *qpair) +{ + struct vmci_queue_header *produce_q_header; + struct vmci_queue_header *consume_q_header; + s64 result; + + if (!qpair) + return VMCI_ERROR_INVALID_ARGS; + + qp_lock(qpair); + result = + qp_get_queue_headers(qpair, &produce_q_header, &consume_q_header); + if (result == VMCI_SUCCESS) + result = vmci_q_header_buf_ready(produce_q_header, + consume_q_header, + qpair->produce_q_size); + else + result = 0; + + qp_unlock(qpair); + + return result; +} +EXPORT_SYMBOL_GPL(vmci_qpair_produce_buf_ready); + +/* + * vmci_qpair_consume_buf_ready() - Gets bytes ready to read from + * consumer queue. + * @qpair: Pointer to the queue pair struct. + * + * This is the client interface for getting the amount of + * enqueued data in the QPair from the point of the view of the + * caller as the consumer which is the normal case. Returns < 0 if err, + * else available bytes that may be read. + */ +s64 vmci_qpair_consume_buf_ready(const struct vmci_qp *qpair) +{ + struct vmci_queue_header *produce_q_header; + struct vmci_queue_header *consume_q_header; + s64 result; + + if (!qpair) + return VMCI_ERROR_INVALID_ARGS; + + qp_lock(qpair); + result = + qp_get_queue_headers(qpair, &produce_q_header, &consume_q_header); + if (result == VMCI_SUCCESS) + result = vmci_q_header_buf_ready(consume_q_header, + produce_q_header, + qpair->consume_q_size); + else + result = 0; + + qp_unlock(qpair); + + return result; +} +EXPORT_SYMBOL_GPL(vmci_qpair_consume_buf_ready); + +/* + * vmci_qpair_enqueue() - Throw data on the queue. + * @qpair: Pointer to the queue pair struct. + * @buf: Pointer to buffer containing data + * @buf_size: Length of buffer. + * @buf_type: Buffer type (Unused). + * + * This is the client interface for enqueueing data into the queue. + * Returns number of bytes enqueued or < 0 on error. + */ +ssize_t vmci_qpair_enqueue(struct vmci_qp *qpair, + const void *buf, + size_t buf_size, + int buf_type) +{ + ssize_t result; + + if (!qpair || !buf) + return VMCI_ERROR_INVALID_ARGS; + + qp_lock(qpair); + + do { + result = qp_enqueue_locked(qpair->produce_q, + qpair->consume_q, + qpair->produce_q_size, + buf, buf_size, + qp_memcpy_to_queue, + vmci_can_block(qpair->flags)); + + if (result == VMCI_ERROR_QUEUEPAIR_NOT_READY && + !qp_wait_for_ready_queue(qpair)) + result = VMCI_ERROR_WOULD_BLOCK; + + } while (result == VMCI_ERROR_QUEUEPAIR_NOT_READY); + + qp_unlock(qpair); + + return result; +} +EXPORT_SYMBOL_GPL(vmci_qpair_enqueue); + +/* + * vmci_qpair_dequeue() - Get data from the queue. + * @qpair: Pointer to the queue pair struct. + * @buf: Pointer to buffer for the data + * @buf_size: Length of buffer. + * @buf_type: Buffer type (Unused). + * + * This is the client interface for dequeueing data from the queue. + * Returns number of bytes dequeued or < 0 on error. + */ +ssize_t vmci_qpair_dequeue(struct vmci_qp *qpair, + void *buf, + size_t buf_size, + int buf_type) +{ + ssize_t result; + + if (!qpair || !buf) + return VMCI_ERROR_INVALID_ARGS; + + qp_lock(qpair); + + do { + result = qp_dequeue_locked(qpair->produce_q, + qpair->consume_q, + qpair->consume_q_size, + buf, buf_size, + qp_memcpy_from_queue, true, + vmci_can_block(qpair->flags)); + + if (result == VMCI_ERROR_QUEUEPAIR_NOT_READY && + !qp_wait_for_ready_queue(qpair)) + result = VMCI_ERROR_WOULD_BLOCK; + + } while (result == VMCI_ERROR_QUEUEPAIR_NOT_READY); + + qp_unlock(qpair); + + return result; +} +EXPORT_SYMBOL_GPL(vmci_qpair_dequeue); + +/* + * vmci_qpair_peek() - Peek at the data in the queue. + * @qpair: Pointer to the queue pair struct. + * @buf: Pointer to buffer for the data + * @buf_size: Length of buffer. + * @buf_type: Buffer type (Unused on Linux). + * + * This is the client interface for peeking into a queue. (I.e., + * copy data from the queue without updating the head pointer.) + * Returns number of bytes dequeued or < 0 on error. + */ +ssize_t vmci_qpair_peek(struct vmci_qp *qpair, + void *buf, + size_t buf_size, + int buf_type) +{ + ssize_t result; + + if (!qpair || !buf) + return VMCI_ERROR_INVALID_ARGS; + + qp_lock(qpair); + + do { + result = qp_dequeue_locked(qpair->produce_q, + qpair->consume_q, + qpair->consume_q_size, + buf, buf_size, + qp_memcpy_from_queue, false, + vmci_can_block(qpair->flags)); + + if (result == VMCI_ERROR_QUEUEPAIR_NOT_READY && + !qp_wait_for_ready_queue(qpair)) + result = VMCI_ERROR_WOULD_BLOCK; + + } while (result == VMCI_ERROR_QUEUEPAIR_NOT_READY); + + qp_unlock(qpair); + + return result; +} +EXPORT_SYMBOL_GPL(vmci_qpair_peek); + +/* + * vmci_qpair_enquev() - Throw data on the queue using iov. + * @qpair: Pointer to the queue pair struct. + * @iov: Pointer to buffer containing data + * @iov_size: Length of buffer. + * @buf_type: Buffer type (Unused). + * + * This is the client interface for enqueueing data into the queue. + * This function uses IO vectors to handle the work. Returns number + * of bytes enqueued or < 0 on error. + */ +ssize_t vmci_qpair_enquev(struct vmci_qp *qpair, + void *iov, + size_t iov_size, + int buf_type) +{ + ssize_t result; + + if (!qpair || !iov) + return VMCI_ERROR_INVALID_ARGS; + + qp_lock(qpair); + + do { + result = qp_enqueue_locked(qpair->produce_q, + qpair->consume_q, + qpair->produce_q_size, + iov, iov_size, + qp_memcpy_to_queue_iov, + vmci_can_block(qpair->flags)); + + if (result == VMCI_ERROR_QUEUEPAIR_NOT_READY && + !qp_wait_for_ready_queue(qpair)) + result = VMCI_ERROR_WOULD_BLOCK; + + } while (result == VMCI_ERROR_QUEUEPAIR_NOT_READY); + + qp_unlock(qpair); + + return result; +} +EXPORT_SYMBOL_GPL(vmci_qpair_enquev); + +/* + * vmci_qpair_dequev() - Get data from the queue using iov. + * @qpair: Pointer to the queue pair struct. + * @iov: Pointer to buffer for the data + * @iov_size: Length of buffer. + * @buf_type: Buffer type (Unused). + * + * This is the client interface for dequeueing data from the queue. + * This function uses IO vectors to handle the work. Returns number + * of bytes dequeued or < 0 on error. + */ +ssize_t vmci_qpair_dequev(struct vmci_qp *qpair, + void *iov, + size_t iov_size, + int buf_type) +{ + ssize_t result; + + if (!qpair || !iov) + return VMCI_ERROR_INVALID_ARGS; + + qp_lock(qpair); + + do { + result = qp_dequeue_locked(qpair->produce_q, + qpair->consume_q, + qpair->consume_q_size, + iov, iov_size, + qp_memcpy_from_queue_iov, + true, vmci_can_block(qpair->flags)); + + if (result == VMCI_ERROR_QUEUEPAIR_NOT_READY && + !qp_wait_for_ready_queue(qpair)) + result = VMCI_ERROR_WOULD_BLOCK; + + } while (result == VMCI_ERROR_QUEUEPAIR_NOT_READY); + + qp_unlock(qpair); + + return result; +} +EXPORT_SYMBOL_GPL(vmci_qpair_dequev); + +/* + * vmci_qpair_peekv() - Peek at the data in the queue using iov. + * @qpair: Pointer to the queue pair struct. + * @iov: Pointer to buffer for the data + * @iov_size: Length of buffer. + * @buf_type: Buffer type (Unused on Linux). + * + * This is the client interface for peeking into a queue. (I.e., + * copy data from the queue without updating the head pointer.) + * This function uses IO vectors to handle the work. Returns number + * of bytes peeked or < 0 on error. + */ +ssize_t vmci_qpair_peekv(struct vmci_qp *qpair, + void *iov, + size_t iov_size, + int buf_type) +{ + ssize_t result; + + if (!qpair || !iov) + return VMCI_ERROR_INVALID_ARGS; + + qp_lock(qpair); + + do { + result = qp_dequeue_locked(qpair->produce_q, + qpair->consume_q, + qpair->consume_q_size, + iov, iov_size, + qp_memcpy_from_queue_iov, + false, vmci_can_block(qpair->flags)); + + if (result == VMCI_ERROR_QUEUEPAIR_NOT_READY && + !qp_wait_for_ready_queue(qpair)) + result = VMCI_ERROR_WOULD_BLOCK; + + } while (result == VMCI_ERROR_QUEUEPAIR_NOT_READY); + + qp_unlock(qpair); + return result; +} +EXPORT_SYMBOL_GPL(vmci_qpair_peekv); diff --git a/drivers/misc/vmw_vmci/vmci_queue_pair.h b/drivers/misc/vmw_vmci/vmci_queue_pair.h new file mode 100644 index 000000000000..58c6959f6b6d --- /dev/null +++ b/drivers/misc/vmw_vmci/vmci_queue_pair.h @@ -0,0 +1,191 @@ +/* + * VMware VMCI Driver + * + * Copyright (C) 2012 VMware, Inc. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation version 2 and no later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY + * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#ifndef _VMCI_QUEUE_PAIR_H_ +#define _VMCI_QUEUE_PAIR_H_ + +#include <linux/vmw_vmci_defs.h> +#include <linux/types.h> + +#include "vmci_context.h" + +/* Callback needed for correctly waiting on events. */ +typedef int (*vmci_event_release_cb) (void *client_data); + +/* Guest device port I/O. */ +struct ppn_set { + u64 num_produce_pages; + u64 num_consume_pages; + u32 *produce_ppns; + u32 *consume_ppns; + bool initialized; +}; + +/* VMCIqueue_pairAllocInfo */ +struct vmci_qp_alloc_info { + struct vmci_handle handle; + u32 peer; + u32 flags; + u64 produce_size; + u64 consume_size; + u64 ppn_va; /* Start VA of queue pair PPNs. */ + u64 num_ppns; + s32 result; + u32 version; +}; + +/* VMCIqueue_pairSetVAInfo */ +struct vmci_qp_set_va_info { + struct vmci_handle handle; + u64 va; /* Start VA of queue pair PPNs. */ + u64 num_ppns; + u32 version; + s32 result; +}; + +/* + * For backwards compatibility, here is a version of the + * VMCIqueue_pairPageFileInfo before host support end-points was added. + * Note that the current version of that structure requires VMX to + * pass down the VA of the mapped file. Before host support was added + * there was nothing of the sort. So, when the driver sees the ioctl + * with a parameter that is the sizeof + * VMCIqueue_pairPageFileInfo_NoHostQP then it can infer that the version + * of VMX running can't attach to host end points because it doesn't + * provide the VA of the mapped files. + * + * The Linux driver doesn't get an indication of the size of the + * structure passed down from user space. So, to fix a long standing + * but unfiled bug, the _pad field has been renamed to version. + * Existing versions of VMX always initialize the PageFileInfo + * structure so that _pad, er, version is set to 0. + * + * A version value of 1 indicates that the size of the structure has + * been increased to include two UVA's: produce_uva and consume_uva. + * These UVA's are of the mmap()'d queue contents backing files. + * + * In addition, if when VMX is sending down the + * VMCIqueue_pairPageFileInfo structure it gets an error then it will + * try again with the _NoHostQP version of the file to see if an older + * VMCI kernel module is running. + */ + +/* VMCIqueue_pairPageFileInfo */ +struct vmci_qp_page_file_info { + struct vmci_handle handle; + u64 produce_page_file; /* User VA. */ + u64 consume_page_file; /* User VA. */ + u64 produce_page_file_size; /* Size of the file name array. */ + u64 consume_page_file_size; /* Size of the file name array. */ + s32 result; + u32 version; /* Was _pad. */ + u64 produce_va; /* User VA of the mapped file. */ + u64 consume_va; /* User VA of the mapped file. */ +}; + +/* vmci queuepair detach info */ +struct vmci_qp_dtch_info { + struct vmci_handle handle; + s32 result; + u32 _pad; +}; + +/* + * struct vmci_qp_page_store describes how the memory of a given queue pair + * is backed. When the queue pair is between the host and a guest, the + * page store consists of references to the guest pages. On vmkernel, + * this is a list of PPNs, and on hosted, it is a user VA where the + * queue pair is mapped into the VMX address space. + */ +struct vmci_qp_page_store { + /* Reference to pages backing the queue pair. */ + u64 pages; + /* Length of pageList/virtual addres range (in pages). */ + u32 len; +}; + +/* + * This data type contains the information about a queue. + * There are two queues (hence, queue pairs) per transaction model between a + * pair of end points, A & B. One queue is used by end point A to transmit + * commands and responses to B. The other queue is used by B to transmit + * commands and responses. + * + * struct vmci_queue_kern_if is a per-OS defined Queue structure. It contains + * either a direct pointer to the linear address of the buffer contents or a + * pointer to structures which help the OS locate those data pages. See + * vmciKernelIf.c for each platform for its definition. + */ +struct vmci_queue { + struct vmci_queue_header *q_header; + struct vmci_queue_header *saved_header; + struct vmci_queue_kern_if *kernel_if; +}; + +/* + * Utility function that checks whether the fields of the page + * store contain valid values. + * Result: + * true if the page store is wellformed. false otherwise. + */ +static inline bool +VMCI_QP_PAGESTORE_IS_WELLFORMED(struct vmci_qp_page_store *page_store) +{ + return page_store->len >= 2; +} + +/* + * Helper function to check if the non-blocking flag + * is set for a given queue pair. + */ +static inline bool vmci_can_block(u32 flags) +{ + return !(flags & VMCI_QPFLAG_NONBLOCK); +} + +/* + * Helper function to check if the queue pair is pinned + * into memory. + */ +static inline bool vmci_qp_pinned(u32 flags) +{ + return flags & VMCI_QPFLAG_PINNED; +} + +void vmci_qp_broker_exit(void); +int vmci_qp_broker_alloc(struct vmci_handle handle, u32 peer, + u32 flags, u32 priv_flags, + u64 produce_size, u64 consume_size, + struct vmci_qp_page_store *page_store, + struct vmci_ctx *context); +int vmci_qp_broker_set_page_store(struct vmci_handle handle, + u64 produce_uva, u64 consume_uva, + struct vmci_ctx *context); +int vmci_qp_broker_detach(struct vmci_handle handle, struct vmci_ctx *context); + +void vmci_qp_guest_endpoints_exit(void); + +int vmci_qp_alloc(struct vmci_handle *handle, + struct vmci_queue **produce_q, u64 produce_size, + struct vmci_queue **consume_q, u64 consume_size, + u32 peer, u32 flags, u32 priv_flags, + bool guest_endpoint, vmci_event_release_cb wakeup_cb, + void *client_data); +int vmci_qp_broker_map(struct vmci_handle handle, + struct vmci_ctx *context, u64 guest_mem); +int vmci_qp_broker_unmap(struct vmci_handle handle, + struct vmci_ctx *context, u32 gid); + +#endif /* _VMCI_QUEUE_PAIR_H_ */ diff --git a/drivers/misc/vmw_vmci/vmci_resource.c b/drivers/misc/vmw_vmci/vmci_resource.c new file mode 100644 index 000000000000..a196f84a4fd2 --- /dev/null +++ b/drivers/misc/vmw_vmci/vmci_resource.c @@ -0,0 +1,229 @@ +/* + * VMware VMCI Driver + * + * Copyright (C) 2012 VMware, Inc. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation version 2 and no later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY + * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#include <linux/vmw_vmci_defs.h> +#include <linux/hash.h> +#include <linux/types.h> +#include <linux/rculist.h> + +#include "vmci_resource.h" +#include "vmci_driver.h" + + +#define VMCI_RESOURCE_HASH_BITS 7 +#define VMCI_RESOURCE_HASH_BUCKETS (1 << VMCI_RESOURCE_HASH_BITS) + +struct vmci_hash_table { + spinlock_t lock; + struct hlist_head entries[VMCI_RESOURCE_HASH_BUCKETS]; +}; + +static struct vmci_hash_table vmci_resource_table = { + .lock = __SPIN_LOCK_UNLOCKED(vmci_resource_table.lock), +}; + +static unsigned int vmci_resource_hash(struct vmci_handle handle) +{ + return hash_32(handle.resource, VMCI_RESOURCE_HASH_BITS); +} + +/* + * Gets a resource (if one exists) matching given handle from the hash table. + */ +static struct vmci_resource *vmci_resource_lookup(struct vmci_handle handle, + enum vmci_resource_type type) +{ + struct vmci_resource *r, *resource = NULL; + struct hlist_node *node; + unsigned int idx = vmci_resource_hash(handle); + + rcu_read_lock(); + hlist_for_each_entry_rcu(r, node, + &vmci_resource_table.entries[idx], node) { + u32 cid = r->handle.context; + u32 rid = r->handle.resource; + + if (r->type == type && + rid == handle.resource && + (cid == handle.context || cid == VMCI_INVALID_ID)) { + resource = r; + break; + } + } + rcu_read_unlock(); + + return resource; +} + +/* + * Find an unused resource ID and return it. The first + * VMCI_RESERVED_RESOURCE_ID_MAX are reserved so we start from + * its value + 1. + * Returns VMCI resource id on success, VMCI_INVALID_ID on failure. + */ +static u32 vmci_resource_find_id(u32 context_id, + enum vmci_resource_type resource_type) +{ + static u32 resource_id = VMCI_RESERVED_RESOURCE_ID_MAX + 1; + u32 old_rid = resource_id; + u32 current_rid; + + /* + * Generate a unique resource ID. Keep on trying until we wrap around + * in the RID space. + */ + do { + struct vmci_handle handle; + + current_rid = resource_id; + resource_id++; + if (unlikely(resource_id == VMCI_INVALID_ID)) { + /* Skip the reserved rids. */ + resource_id = VMCI_RESERVED_RESOURCE_ID_MAX + 1; + } + + handle = vmci_make_handle(context_id, current_rid); + if (!vmci_resource_lookup(handle, resource_type)) + return current_rid; + } while (resource_id != old_rid); + + return VMCI_INVALID_ID; +} + + +int vmci_resource_add(struct vmci_resource *resource, + enum vmci_resource_type resource_type, + struct vmci_handle handle) + +{ + unsigned int idx; + int result; + + spin_lock(&vmci_resource_table.lock); + + if (handle.resource == VMCI_INVALID_ID) { + handle.resource = vmci_resource_find_id(handle.context, + resource_type); + if (handle.resource == VMCI_INVALID_ID) { + result = VMCI_ERROR_NO_HANDLE; + goto out; + } + } else if (vmci_resource_lookup(handle, resource_type)) { + result = VMCI_ERROR_ALREADY_EXISTS; + goto out; + } + + resource->handle = handle; + resource->type = resource_type; + INIT_HLIST_NODE(&resource->node); + kref_init(&resource->kref); + init_completion(&resource->done); + + idx = vmci_resource_hash(resource->handle); + hlist_add_head_rcu(&resource->node, &vmci_resource_table.entries[idx]); + + result = VMCI_SUCCESS; + +out: + spin_unlock(&vmci_resource_table.lock); + return result; +} + +void vmci_resource_remove(struct vmci_resource *resource) +{ + struct vmci_handle handle = resource->handle; + unsigned int idx = vmci_resource_hash(handle); + struct vmci_resource *r; + struct hlist_node *node; + + /* Remove resource from hash table. */ + spin_lock(&vmci_resource_table.lock); + + hlist_for_each_entry(r, node, &vmci_resource_table.entries[idx], node) { + if (vmci_handle_is_equal(r->handle, resource->handle)) { + hlist_del_init_rcu(&r->node); + break; + } + } + + spin_unlock(&vmci_resource_table.lock); + synchronize_rcu(); + + vmci_resource_put(resource); + wait_for_completion(&resource->done); +} + +struct vmci_resource * +vmci_resource_by_handle(struct vmci_handle resource_handle, + enum vmci_resource_type resource_type) +{ + struct vmci_resource *r, *resource = NULL; + + rcu_read_lock(); + + r = vmci_resource_lookup(resource_handle, resource_type); + if (r && + (resource_type == r->type || + resource_type == VMCI_RESOURCE_TYPE_ANY)) { + resource = vmci_resource_get(r); + } + + rcu_read_unlock(); + + return resource; +} + +/* + * Get a reference to given resource. + */ +struct vmci_resource *vmci_resource_get(struct vmci_resource *resource) +{ + kref_get(&resource->kref); + + return resource; +} + +static void vmci_release_resource(struct kref *kref) +{ + struct vmci_resource *resource = + container_of(kref, struct vmci_resource, kref); + + /* Verify the resource has been unlinked from hash table */ + WARN_ON(!hlist_unhashed(&resource->node)); + + /* Signal that container of this resource can now be destroyed */ + complete(&resource->done); +} + +/* + * Resource's release function will get called if last reference. + * If it is the last reference, then we are sure that nobody else + * can increment the count again (it's gone from the resource hash + * table), so there's no need for locking here. + */ +int vmci_resource_put(struct vmci_resource *resource) +{ + /* + * We propagate the information back to caller in case it wants to know + * whether entry was freed. + */ + return kref_put(&resource->kref, vmci_release_resource) ? + VMCI_SUCCESS_ENTRY_DEAD : VMCI_SUCCESS; +} + +struct vmci_handle vmci_resource_handle(struct vmci_resource *resource) +{ + return resource->handle; +} diff --git a/drivers/misc/vmw_vmci/vmci_resource.h b/drivers/misc/vmw_vmci/vmci_resource.h new file mode 100644 index 000000000000..9190cd298bee --- /dev/null +++ b/drivers/misc/vmw_vmci/vmci_resource.h @@ -0,0 +1,59 @@ +/* + * VMware VMCI Driver + * + * Copyright (C) 2012 VMware, Inc. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation version 2 and no later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY + * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#ifndef _VMCI_RESOURCE_H_ +#define _VMCI_RESOURCE_H_ + +#include <linux/vmw_vmci_defs.h> +#include <linux/types.h> + +#include "vmci_context.h" + + +enum vmci_resource_type { + VMCI_RESOURCE_TYPE_ANY, + VMCI_RESOURCE_TYPE_API, + VMCI_RESOURCE_TYPE_GROUP, + VMCI_RESOURCE_TYPE_DATAGRAM, + VMCI_RESOURCE_TYPE_DOORBELL, + VMCI_RESOURCE_TYPE_QPAIR_GUEST, + VMCI_RESOURCE_TYPE_QPAIR_HOST +}; + +struct vmci_resource { + struct vmci_handle handle; + enum vmci_resource_type type; + struct hlist_node node; + struct kref kref; + struct completion done; +}; + + +int vmci_resource_add(struct vmci_resource *resource, + enum vmci_resource_type resource_type, + struct vmci_handle handle); + +void vmci_resource_remove(struct vmci_resource *resource); + +struct vmci_resource * +vmci_resource_by_handle(struct vmci_handle resource_handle, + enum vmci_resource_type resource_type); + +struct vmci_resource *vmci_resource_get(struct vmci_resource *resource); +int vmci_resource_put(struct vmci_resource *resource); + +struct vmci_handle vmci_resource_handle(struct vmci_resource *resource); + +#endif /* _VMCI_RESOURCE_H_ */ diff --git a/drivers/misc/vmw_vmci/vmci_route.c b/drivers/misc/vmw_vmci/vmci_route.c new file mode 100644 index 000000000000..91090658b929 --- /dev/null +++ b/drivers/misc/vmw_vmci/vmci_route.c @@ -0,0 +1,226 @@ +/* + * VMware VMCI Driver + * + * Copyright (C) 2012 VMware, Inc. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation version 2 and no later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY + * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#include <linux/vmw_vmci_defs.h> +#include <linux/vmw_vmci_api.h> + +#include "vmci_context.h" +#include "vmci_driver.h" +#include "vmci_route.h" + +/* + * Make a routing decision for the given source and destination handles. + * This will try to determine the route using the handles and the available + * devices. Will set the source context if it is invalid. + */ +int vmci_route(struct vmci_handle *src, + const struct vmci_handle *dst, + bool from_guest, + enum vmci_route *route) +{ + bool has_host_device = vmci_host_code_active(); + bool has_guest_device = vmci_guest_code_active(); + + *route = VMCI_ROUTE_NONE; + + /* + * "from_guest" is only ever set to true by + * IOCTL_VMCI_DATAGRAM_SEND (or by the vmkernel equivalent), + * which comes from the VMX, so we know it is coming from a + * guest. + * + * To avoid inconsistencies, test these once. We will test + * them again when we do the actual send to ensure that we do + * not touch a non-existent device. + */ + + /* Must have a valid destination context. */ + if (VMCI_INVALID_ID == dst->context) + return VMCI_ERROR_INVALID_ARGS; + + /* Anywhere to hypervisor. */ + if (VMCI_HYPERVISOR_CONTEXT_ID == dst->context) { + + /* + * If this message already came from a guest then we + * cannot send it to the hypervisor. It must come + * from a local client. + */ + if (from_guest) + return VMCI_ERROR_DST_UNREACHABLE; + + /* + * We must be acting as a guest in order to send to + * the hypervisor. + */ + if (!has_guest_device) + return VMCI_ERROR_DEVICE_NOT_FOUND; + + /* And we cannot send if the source is the host context. */ + if (VMCI_HOST_CONTEXT_ID == src->context) + return VMCI_ERROR_INVALID_ARGS; + + /* + * If the client passed the ANON source handle then + * respect it (both context and resource are invalid). + * However, if they passed only an invalid context, + * then they probably mean ANY, in which case we + * should set the real context here before passing it + * down. + */ + if (VMCI_INVALID_ID == src->context && + VMCI_INVALID_ID != src->resource) + src->context = vmci_get_context_id(); + + /* Send from local client down to the hypervisor. */ + *route = VMCI_ROUTE_AS_GUEST; + return VMCI_SUCCESS; + } + + /* Anywhere to local client on host. */ + if (VMCI_HOST_CONTEXT_ID == dst->context) { + /* + * If it is not from a guest but we are acting as a + * guest, then we need to send it down to the host. + * Note that if we are also acting as a host then this + * will prevent us from sending from local client to + * local client, but we accept that restriction as a + * way to remove any ambiguity from the host context. + */ + if (src->context == VMCI_HYPERVISOR_CONTEXT_ID) { + /* + * If the hypervisor is the source, this is + * host local communication. The hypervisor + * may send vmci event datagrams to the host + * itself, but it will never send datagrams to + * an "outer host" through the guest device. + */ + + if (has_host_device) { + *route = VMCI_ROUTE_AS_HOST; + return VMCI_SUCCESS; + } else { + return VMCI_ERROR_DEVICE_NOT_FOUND; + } + } + + if (!from_guest && has_guest_device) { + /* If no source context then use the current. */ + if (VMCI_INVALID_ID == src->context) + src->context = vmci_get_context_id(); + + /* Send it from local client down to the host. */ + *route = VMCI_ROUTE_AS_GUEST; + return VMCI_SUCCESS; + } + + /* + * Otherwise we already received it from a guest and + * it is destined for a local client on this host, or + * it is from another local client on this host. We + * must be acting as a host to service it. + */ + if (!has_host_device) + return VMCI_ERROR_DEVICE_NOT_FOUND; + + if (VMCI_INVALID_ID == src->context) { + /* + * If it came from a guest then it must have a + * valid context. Otherwise we can use the + * host context. + */ + if (from_guest) + return VMCI_ERROR_INVALID_ARGS; + + src->context = VMCI_HOST_CONTEXT_ID; + } + + /* Route to local client. */ + *route = VMCI_ROUTE_AS_HOST; + return VMCI_SUCCESS; + } + + /* + * If we are acting as a host then this might be destined for + * a guest. + */ + if (has_host_device) { + /* It will have a context if it is meant for a guest. */ + if (vmci_ctx_exists(dst->context)) { + if (VMCI_INVALID_ID == src->context) { + /* + * If it came from a guest then it + * must have a valid context. + * Otherwise we can use the host + * context. + */ + + if (from_guest) + return VMCI_ERROR_INVALID_ARGS; + + src->context = VMCI_HOST_CONTEXT_ID; + } else if (VMCI_CONTEXT_IS_VM(src->context) && + src->context != dst->context) { + /* + * VM to VM communication is not + * allowed. Since we catch all + * communication destined for the host + * above, this must be destined for a + * VM since there is a valid context. + */ + + return VMCI_ERROR_DST_UNREACHABLE; + } + + /* Pass it up to the guest. */ + *route = VMCI_ROUTE_AS_HOST; + return VMCI_SUCCESS; + } else if (!has_guest_device) { + /* + * The host is attempting to reach a CID + * without an active context, and we can't + * send it down, since we have no guest + * device. + */ + + return VMCI_ERROR_DST_UNREACHABLE; + } + } + + /* + * We must be a guest trying to send to another guest, which means + * we need to send it down to the host. We do not filter out VM to + * VM communication here, since we want to be able to use the guest + * driver on older versions that do support VM to VM communication. + */ + if (!has_guest_device) { + /* + * Ending up here means we have neither guest nor host + * device. + */ + return VMCI_ERROR_DEVICE_NOT_FOUND; + } + + /* If no source context then use the current context. */ + if (VMCI_INVALID_ID == src->context) + src->context = vmci_get_context_id(); + + /* + * Send it from local client down to the host, which will + * route it to the other guest for us. + */ + *route = VMCI_ROUTE_AS_GUEST; + return VMCI_SUCCESS; +} diff --git a/drivers/misc/vmw_vmci/vmci_route.h b/drivers/misc/vmw_vmci/vmci_route.h new file mode 100644 index 000000000000..3b30e82419c3 --- /dev/null +++ b/drivers/misc/vmw_vmci/vmci_route.h @@ -0,0 +1,30 @@ +/* + * VMware VMCI Driver + * + * Copyright (C) 2012 VMware, Inc. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation version 2 and no later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY + * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#ifndef _VMCI_ROUTE_H_ +#define _VMCI_ROUTE_H_ + +#include <linux/vmw_vmci_defs.h> + +enum vmci_route { + VMCI_ROUTE_NONE, + VMCI_ROUTE_AS_HOST, + VMCI_ROUTE_AS_GUEST, +}; + +int vmci_route(struct vmci_handle *src, const struct vmci_handle *dst, + bool from_guest, enum vmci_route *route); + +#endif /* _VMCI_ROUTE_H_ */ diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index cc8a8fad455a..3be8b94d7914 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -457,7 +457,7 @@ config MMC_SDHI config MMC_CB710 tristate "ENE CB710 MMC/SD Interface support" - depends on PCI + depends on PCI && GENERIC_HARDIRQS select CB710_CORE help This option enables support for MMC/SD part of ENE CB710/720 Flash diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 2334190ff8d2..56c2d75a63d4 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -188,6 +188,10 @@ config NETPOLL_TRAP config NET_POLL_CONTROLLER def_bool NETPOLL +config NTB_NETDEV + tristate "Virtual Ethernet over NTB" + depends on NTB + config RIONET tristate "RapidIO Ethernet over messaging driver support" depends on RAPIDIO diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 335db78fd987..ef3d090efedf 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -71,3 +71,4 @@ obj-$(CONFIG_USB_IPHETH) += usb/ obj-$(CONFIG_USB_CDC_PHONET) += usb/ obj-$(CONFIG_HYPERV_NET) += hyperv/ +obj-$(CONFIG_NTB_NETDEV) += ntb_netdev.o diff --git a/drivers/net/hyperv/netvsc_drv.c b/drivers/net/hyperv/netvsc_drv.c index d5202a4b0877..5f85205cd12b 100644 --- a/drivers/net/hyperv/netvsc_drv.c +++ b/drivers/net/hyperv/netvsc_drv.c @@ -498,8 +498,7 @@ static int netvsc_remove(struct hv_device *dev) static const struct hv_vmbus_device_id id_table[] = { /* Network guid */ - { VMBUS_DEVICE(0x63, 0x51, 0x61, 0xF8, 0x3E, 0xDF, 0xc5, 0x46, - 0x91, 0x3F, 0xF2, 0xD2, 0xF9, 0x65, 0xED, 0x0E) }, + { HV_NIC_GUID, }, { }, }; diff --git a/drivers/net/ntb_netdev.c b/drivers/net/ntb_netdev.c new file mode 100644 index 000000000000..ed947dd76fbd --- /dev/null +++ b/drivers/net/ntb_netdev.c @@ -0,0 +1,408 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2012 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * BSD LICENSE + * + * Copyright(c) 2012 Intel Corporation. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copy + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * Intel PCIe NTB Network Linux driver + * + * Contact Information: + * Jon Mason <jon.mason@intel.com> + */ +#include <linux/etherdevice.h> +#include <linux/ethtool.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/ntb.h> + +#define NTB_NETDEV_VER "0.7" + +MODULE_DESCRIPTION(KBUILD_MODNAME); +MODULE_VERSION(NTB_NETDEV_VER); +MODULE_LICENSE("Dual BSD/GPL"); +MODULE_AUTHOR("Intel Corporation"); + +struct ntb_netdev { + struct list_head list; + struct pci_dev *pdev; + struct net_device *ndev; + struct ntb_transport_qp *qp; +}; + +#define NTB_TX_TIMEOUT_MS 1000 +#define NTB_RXQ_SIZE 100 + +static LIST_HEAD(dev_list); + +static void ntb_netdev_event_handler(void *data, int status) +{ + struct net_device *ndev = data; + struct ntb_netdev *dev = netdev_priv(ndev); + + netdev_dbg(ndev, "Event %x, Link %x\n", status, + ntb_transport_link_query(dev->qp)); + + /* Currently, only link status event is supported */ + if (status) + netif_carrier_on(ndev); + else + netif_carrier_off(ndev); +} + +static void ntb_netdev_rx_handler(struct ntb_transport_qp *qp, void *qp_data, + void *data, int len) +{ + struct net_device *ndev = qp_data; + struct sk_buff *skb; + int rc; + + skb = data; + if (!skb) + return; + + netdev_dbg(ndev, "%s: %d byte payload received\n", __func__, len); + + skb_put(skb, len); + skb->protocol = eth_type_trans(skb, ndev); + skb->ip_summed = CHECKSUM_NONE; + + if (netif_rx(skb) == NET_RX_DROP) { + ndev->stats.rx_errors++; + ndev->stats.rx_dropped++; + } else { + ndev->stats.rx_packets++; + ndev->stats.rx_bytes += len; + } + + skb = netdev_alloc_skb(ndev, ndev->mtu + ETH_HLEN); + if (!skb) { + ndev->stats.rx_errors++; + ndev->stats.rx_frame_errors++; + return; + } + + rc = ntb_transport_rx_enqueue(qp, skb, skb->data, ndev->mtu + ETH_HLEN); + if (rc) { + dev_kfree_skb(skb); + ndev->stats.rx_errors++; + ndev->stats.rx_fifo_errors++; + } +} + +static void ntb_netdev_tx_handler(struct ntb_transport_qp *qp, void *qp_data, + void *data, int len) +{ + struct net_device *ndev = qp_data; + struct sk_buff *skb; + + skb = data; + if (!skb || !ndev) + return; + + if (len > 0) { + ndev->stats.tx_packets++; + ndev->stats.tx_bytes += skb->len; + } else { + ndev->stats.tx_errors++; + ndev->stats.tx_aborted_errors++; + } + + dev_kfree_skb(skb); +} + +static netdev_tx_t ntb_netdev_start_xmit(struct sk_buff *skb, + struct net_device *ndev) +{ + struct ntb_netdev *dev = netdev_priv(ndev); + int rc; + + netdev_dbg(ndev, "%s: skb len %d\n", __func__, skb->len); + + rc = ntb_transport_tx_enqueue(dev->qp, skb, skb->data, skb->len); + if (rc) + goto err; + + return NETDEV_TX_OK; + +err: + ndev->stats.tx_dropped++; + ndev->stats.tx_errors++; + return NETDEV_TX_BUSY; +} + +static int ntb_netdev_open(struct net_device *ndev) +{ + struct ntb_netdev *dev = netdev_priv(ndev); + struct sk_buff *skb; + int rc, i, len; + + /* Add some empty rx bufs */ + for (i = 0; i < NTB_RXQ_SIZE; i++) { + skb = netdev_alloc_skb(ndev, ndev->mtu + ETH_HLEN); + if (!skb) { + rc = -ENOMEM; + goto err; + } + + rc = ntb_transport_rx_enqueue(dev->qp, skb, skb->data, + ndev->mtu + ETH_HLEN); + if (rc == -EINVAL) + goto err; + } + + netif_carrier_off(ndev); + ntb_transport_link_up(dev->qp); + + return 0; + +err: + while ((skb = ntb_transport_rx_remove(dev->qp, &len))) + dev_kfree_skb(skb); + return rc; +} + +static int ntb_netdev_close(struct net_device *ndev) +{ + struct ntb_netdev *dev = netdev_priv(ndev); + struct sk_buff *skb; + int len; + + ntb_transport_link_down(dev->qp); + + while ((skb = ntb_transport_rx_remove(dev->qp, &len))) + dev_kfree_skb(skb); + + return 0; +} + +static int ntb_netdev_change_mtu(struct net_device *ndev, int new_mtu) +{ + struct ntb_netdev *dev = netdev_priv(ndev); + struct sk_buff *skb; + int len, rc; + + if (new_mtu > ntb_transport_max_size(dev->qp) - ETH_HLEN) + return -EINVAL; + + if (!netif_running(ndev)) { + ndev->mtu = new_mtu; + return 0; + } + + /* Bring down the link and dispose of posted rx entries */ + ntb_transport_link_down(dev->qp); + + if (ndev->mtu < new_mtu) { + int i; + + for (i = 0; (skb = ntb_transport_rx_remove(dev->qp, &len)); i++) + dev_kfree_skb(skb); + + for (; i; i--) { + skb = netdev_alloc_skb(ndev, new_mtu + ETH_HLEN); + if (!skb) { + rc = -ENOMEM; + goto err; + } + + rc = ntb_transport_rx_enqueue(dev->qp, skb, skb->data, + new_mtu + ETH_HLEN); + if (rc) { + dev_kfree_skb(skb); + goto err; + } + } + } + + ndev->mtu = new_mtu; + + ntb_transport_link_up(dev->qp); + + return 0; + +err: + ntb_transport_link_down(dev->qp); + + while ((skb = ntb_transport_rx_remove(dev->qp, &len))) + dev_kfree_skb(skb); + + netdev_err(ndev, "Error changing MTU, device inoperable\n"); + return rc; +} + +static const struct net_device_ops ntb_netdev_ops = { + .ndo_open = ntb_netdev_open, + .ndo_stop = ntb_netdev_close, + .ndo_start_xmit = ntb_netdev_start_xmit, + .ndo_change_mtu = ntb_netdev_change_mtu, + .ndo_set_mac_address = eth_mac_addr, +}; + +static void ntb_get_drvinfo(struct net_device *ndev, + struct ethtool_drvinfo *info) +{ + struct ntb_netdev *dev = netdev_priv(ndev); + + strlcpy(info->driver, KBUILD_MODNAME, sizeof(info->driver)); + strlcpy(info->version, NTB_NETDEV_VER, sizeof(info->version)); + strlcpy(info->bus_info, pci_name(dev->pdev), sizeof(info->bus_info)); +} + +static int ntb_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + cmd->supported = SUPPORTED_Backplane; + cmd->advertising = ADVERTISED_Backplane; + cmd->speed = SPEED_UNKNOWN; + ethtool_cmd_speed_set(cmd, SPEED_UNKNOWN); + cmd->duplex = DUPLEX_FULL; + cmd->port = PORT_OTHER; + cmd->phy_address = 0; + cmd->transceiver = XCVR_DUMMY1; + cmd->autoneg = AUTONEG_ENABLE; + cmd->maxtxpkt = 0; + cmd->maxrxpkt = 0; + + return 0; +} + +static const struct ethtool_ops ntb_ethtool_ops = { + .get_drvinfo = ntb_get_drvinfo, + .get_link = ethtool_op_get_link, + .get_settings = ntb_get_settings, +}; + +static const struct ntb_queue_handlers ntb_netdev_handlers = { + .tx_handler = ntb_netdev_tx_handler, + .rx_handler = ntb_netdev_rx_handler, + .event_handler = ntb_netdev_event_handler, +}; + +static int ntb_netdev_probe(struct pci_dev *pdev) +{ + struct net_device *ndev; + struct ntb_netdev *dev; + int rc; + + ndev = alloc_etherdev(sizeof(struct ntb_netdev)); + if (!ndev) + return -ENOMEM; + + dev = netdev_priv(ndev); + dev->ndev = ndev; + dev->pdev = pdev; + BUG_ON(!dev->pdev); + ndev->features = NETIF_F_HIGHDMA; + + ndev->priv_flags |= IFF_LIVE_ADDR_CHANGE; + + ndev->hw_features = ndev->features; + ndev->watchdog_timeo = msecs_to_jiffies(NTB_TX_TIMEOUT_MS); + + random_ether_addr(ndev->perm_addr); + memcpy(ndev->dev_addr, ndev->perm_addr, ndev->addr_len); + + ndev->netdev_ops = &ntb_netdev_ops; + SET_ETHTOOL_OPS(ndev, &ntb_ethtool_ops); + + dev->qp = ntb_transport_create_queue(ndev, pdev, &ntb_netdev_handlers); + if (!dev->qp) { + rc = -EIO; + goto err; + } + + ndev->mtu = ntb_transport_max_size(dev->qp) - ETH_HLEN; + + rc = register_netdev(ndev); + if (rc) + goto err1; + + list_add(&dev->list, &dev_list); + dev_info(&pdev->dev, "%s created\n", ndev->name); + return 0; + +err1: + ntb_transport_free_queue(dev->qp); +err: + free_netdev(ndev); + return rc; +} + +static void ntb_netdev_remove(struct pci_dev *pdev) +{ + struct net_device *ndev; + struct ntb_netdev *dev; + + list_for_each_entry(dev, &dev_list, list) { + if (dev->pdev == pdev) + break; + } + if (dev == NULL) + return; + + ndev = dev->ndev; + + unregister_netdev(ndev); + ntb_transport_free_queue(dev->qp); + free_netdev(ndev); +} + +static struct ntb_client ntb_netdev_client = { + .driver.name = KBUILD_MODNAME, + .driver.owner = THIS_MODULE, + .probe = ntb_netdev_probe, + .remove = ntb_netdev_remove, +}; + +static int __init ntb_netdev_init_module(void) +{ + int rc; + + rc = ntb_register_client_dev(KBUILD_MODNAME); + if (rc) + return rc; + return ntb_register_client(&ntb_netdev_client); +} +module_init(ntb_netdev_init_module); + +static void __exit ntb_netdev_exit_module(void) +{ + ntb_unregister_client(&ntb_netdev_client); + ntb_unregister_client_dev(KBUILD_MODNAME); +} +module_exit(ntb_netdev_exit_module); diff --git a/drivers/ntb/Kconfig b/drivers/ntb/Kconfig new file mode 100644 index 000000000000..37ee6495acc1 --- /dev/null +++ b/drivers/ntb/Kconfig @@ -0,0 +1,13 @@ +config NTB + tristate "Intel Non-Transparent Bridge support" + depends on PCI + depends on X86_64 + help + The PCI-E Non-transparent bridge hardware is a point-to-point PCI-E bus + connecting 2 systems. When configured, writes to the device's PCI + mapped memory will be mirrored to a buffer on the remote system. The + ntb Linux driver uses this point-to-point communication as a method to + transfer data from one system to the other. + + If unsure, say N. + diff --git a/drivers/ntb/Makefile b/drivers/ntb/Makefile new file mode 100644 index 000000000000..15cb59fd354e --- /dev/null +++ b/drivers/ntb/Makefile @@ -0,0 +1,3 @@ +obj-$(CONFIG_NTB) += ntb.o + +ntb-objs := ntb_hw.o ntb_transport.o diff --git a/drivers/ntb/ntb_hw.c b/drivers/ntb/ntb_hw.c new file mode 100644 index 000000000000..f802e7c92356 --- /dev/null +++ b/drivers/ntb/ntb_hw.c @@ -0,0 +1,1141 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2012 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * BSD LICENSE + * + * Copyright(c) 2012 Intel Corporation. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copy + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * Intel PCIe NTB Linux driver + * + * Contact Information: + * Jon Mason <jon.mason@intel.com> + */ +#include <linux/debugfs.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/slab.h> +#include "ntb_hw.h" +#include "ntb_regs.h" + +#define NTB_NAME "Intel(R) PCI-E Non-Transparent Bridge Driver" +#define NTB_VER "0.25" + +MODULE_DESCRIPTION(NTB_NAME); +MODULE_VERSION(NTB_VER); +MODULE_LICENSE("Dual BSD/GPL"); +MODULE_AUTHOR("Intel Corporation"); + +enum { + NTB_CONN_CLASSIC = 0, + NTB_CONN_B2B, + NTB_CONN_RP, +}; + +enum { + NTB_DEV_USD = 0, + NTB_DEV_DSD, +}; + +enum { + SNB_HW = 0, + BWD_HW, +}; + +/* Translate memory window 0,1 to BAR 2,4 */ +#define MW_TO_BAR(mw) (mw * 2 + 2) + +static DEFINE_PCI_DEVICE_TABLE(ntb_pci_tbl) = { + {PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_NTB_B2B_BWD)}, + {PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_NTB_B2B_JSF)}, + {PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_NTB_CLASSIC_JSF)}, + {PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_NTB_RP_JSF)}, + {PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_NTB_RP_SNB)}, + {PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_NTB_B2B_SNB)}, + {PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_NTB_CLASSIC_SNB)}, + {0} +}; +MODULE_DEVICE_TABLE(pci, ntb_pci_tbl); + +/** + * ntb_register_event_callback() - register event callback + * @ndev: pointer to ntb_device instance + * @func: callback function to register + * + * This function registers a callback for any HW driver events such as link + * up/down, power management notices and etc. + * + * RETURNS: An appropriate -ERRNO error value on error, or zero for success. + */ +int ntb_register_event_callback(struct ntb_device *ndev, + void (*func)(void *handle, enum ntb_hw_event event)) +{ + if (ndev->event_cb) + return -EINVAL; + + ndev->event_cb = func; + + return 0; +} + +/** + * ntb_unregister_event_callback() - unregisters the event callback + * @ndev: pointer to ntb_device instance + * + * This function unregisters the existing callback from transport + */ +void ntb_unregister_event_callback(struct ntb_device *ndev) +{ + ndev->event_cb = NULL; +} + +/** + * ntb_register_db_callback() - register a callback for doorbell interrupt + * @ndev: pointer to ntb_device instance + * @idx: doorbell index to register callback, zero based + * @func: callback function to register + * + * This function registers a callback function for the doorbell interrupt + * on the primary side. The function will unmask the doorbell as well to + * allow interrupt. + * + * RETURNS: An appropriate -ERRNO error value on error, or zero for success. + */ +int ntb_register_db_callback(struct ntb_device *ndev, unsigned int idx, + void *data, void (*func)(void *data, int db_num)) +{ + unsigned long mask; + + if (idx >= ndev->max_cbs || ndev->db_cb[idx].callback) { + dev_warn(&ndev->pdev->dev, "Invalid Index.\n"); + return -EINVAL; + } + + ndev->db_cb[idx].callback = func; + ndev->db_cb[idx].data = data; + + /* unmask interrupt */ + mask = readw(ndev->reg_ofs.pdb_mask); + clear_bit(idx * ndev->bits_per_vector, &mask); + writew(mask, ndev->reg_ofs.pdb_mask); + + return 0; +} + +/** + * ntb_unregister_db_callback() - unregister a callback for doorbell interrupt + * @ndev: pointer to ntb_device instance + * @idx: doorbell index to register callback, zero based + * + * This function unregisters a callback function for the doorbell interrupt + * on the primary side. The function will also mask the said doorbell. + */ +void ntb_unregister_db_callback(struct ntb_device *ndev, unsigned int idx) +{ + unsigned long mask; + + if (idx >= ndev->max_cbs || !ndev->db_cb[idx].callback) + return; + + mask = readw(ndev->reg_ofs.pdb_mask); + set_bit(idx * ndev->bits_per_vector, &mask); + writew(mask, ndev->reg_ofs.pdb_mask); + + ndev->db_cb[idx].callback = NULL; +} + +/** + * ntb_find_transport() - find the transport pointer + * @transport: pointer to pci device + * + * Given the pci device pointer, return the transport pointer passed in when + * the transport attached when it was inited. + * + * RETURNS: pointer to transport. + */ +void *ntb_find_transport(struct pci_dev *pdev) +{ + struct ntb_device *ndev = pci_get_drvdata(pdev); + return ndev->ntb_transport; +} + +/** + * ntb_register_transport() - Register NTB transport with NTB HW driver + * @transport: transport identifier + * + * This function allows a transport to reserve the hardware driver for + * NTB usage. + * + * RETURNS: pointer to ntb_device, NULL on error. + */ +struct ntb_device *ntb_register_transport(struct pci_dev *pdev, void *transport) +{ + struct ntb_device *ndev = pci_get_drvdata(pdev); + + if (ndev->ntb_transport) + return NULL; + + ndev->ntb_transport = transport; + return ndev; +} + +/** + * ntb_unregister_transport() - Unregister the transport with the NTB HW driver + * @ndev - ntb_device of the transport to be freed + * + * This function unregisters the transport from the HW driver and performs any + * necessary cleanups. + */ +void ntb_unregister_transport(struct ntb_device *ndev) +{ + int i; + + if (!ndev->ntb_transport) + return; + + for (i = 0; i < ndev->max_cbs; i++) + ntb_unregister_db_callback(ndev, i); + + ntb_unregister_event_callback(ndev); + ndev->ntb_transport = NULL; +} + +/** + * ntb_write_local_spad() - write to the secondary scratchpad register + * @ndev: pointer to ntb_device instance + * @idx: index to the scratchpad register, 0 based + * @val: the data value to put into the register + * + * This function allows writing of a 32bit value to the indexed scratchpad + * register. This writes over the data mirrored to the local scratchpad register + * by the remote system. + * + * RETURNS: An appropriate -ERRNO error value on error, or zero for success. + */ +int ntb_write_local_spad(struct ntb_device *ndev, unsigned int idx, u32 val) +{ + if (idx >= ndev->limits.max_spads) + return -EINVAL; + + dev_dbg(&ndev->pdev->dev, "Writing %x to local scratch pad index %d\n", + val, idx); + writel(val, ndev->reg_ofs.spad_read + idx * 4); + + return 0; +} + +/** + * ntb_read_local_spad() - read from the primary scratchpad register + * @ndev: pointer to ntb_device instance + * @idx: index to scratchpad register, 0 based + * @val: pointer to 32bit integer for storing the register value + * + * This function allows reading of the 32bit scratchpad register on + * the primary (internal) side. This allows the local system to read data + * written and mirrored to the scratchpad register by the remote system. + * + * RETURNS: An appropriate -ERRNO error value on error, or zero for success. + */ +int ntb_read_local_spad(struct ntb_device *ndev, unsigned int idx, u32 *val) +{ + if (idx >= ndev->limits.max_spads) + return -EINVAL; + + *val = readl(ndev->reg_ofs.spad_write + idx * 4); + dev_dbg(&ndev->pdev->dev, + "Reading %x from local scratch pad index %d\n", *val, idx); + + return 0; +} + +/** + * ntb_write_remote_spad() - write to the secondary scratchpad register + * @ndev: pointer to ntb_device instance + * @idx: index to the scratchpad register, 0 based + * @val: the data value to put into the register + * + * This function allows writing of a 32bit value to the indexed scratchpad + * register. The register resides on the secondary (external) side. This allows + * the local system to write data to be mirrored to the remote systems + * scratchpad register. + * + * RETURNS: An appropriate -ERRNO error value on error, or zero for success. + */ +int ntb_write_remote_spad(struct ntb_device *ndev, unsigned int idx, u32 val) +{ + if (idx >= ndev->limits.max_spads) + return -EINVAL; + + dev_dbg(&ndev->pdev->dev, "Writing %x to remote scratch pad index %d\n", + val, idx); + writel(val, ndev->reg_ofs.spad_write + idx * 4); + + return 0; +} + +/** + * ntb_read_remote_spad() - read from the primary scratchpad register + * @ndev: pointer to ntb_device instance + * @idx: index to scratchpad register, 0 based + * @val: pointer to 32bit integer for storing the register value + * + * This function allows reading of the 32bit scratchpad register on + * the primary (internal) side. This alloows the local system to read the data + * it wrote to be mirrored on the remote system. + * + * RETURNS: An appropriate -ERRNO error value on error, or zero for success. + */ +int ntb_read_remote_spad(struct ntb_device *ndev, unsigned int idx, u32 *val) +{ + if (idx >= ndev->limits.max_spads) + return -EINVAL; + + *val = readl(ndev->reg_ofs.spad_read + idx * 4); + dev_dbg(&ndev->pdev->dev, + "Reading %x from remote scratch pad index %d\n", *val, idx); + + return 0; +} + +/** + * ntb_get_mw_vbase() - get virtual addr for the NTB memory window + * @ndev: pointer to ntb_device instance + * @mw: memory window number + * + * This function provides the base virtual address of the memory window + * specified. + * + * RETURNS: pointer to virtual address, or NULL on error. + */ +void __iomem *ntb_get_mw_vbase(struct ntb_device *ndev, unsigned int mw) +{ + if (mw > NTB_NUM_MW) + return NULL; + + return ndev->mw[mw].vbase; +} + +/** + * ntb_get_mw_size() - return size of NTB memory window + * @ndev: pointer to ntb_device instance + * @mw: memory window number + * + * This function provides the physical size of the memory window specified + * + * RETURNS: the size of the memory window or zero on error + */ +resource_size_t ntb_get_mw_size(struct ntb_device *ndev, unsigned int mw) +{ + if (mw > NTB_NUM_MW) + return 0; + + return ndev->mw[mw].bar_sz; +} + +/** + * ntb_set_mw_addr - set the memory window address + * @ndev: pointer to ntb_device instance + * @mw: memory window number + * @addr: base address for data + * + * This function sets the base physical address of the memory window. This + * memory address is where data from the remote system will be transfered into + * or out of depending on how the transport is configured. + */ +void ntb_set_mw_addr(struct ntb_device *ndev, unsigned int mw, u64 addr) +{ + if (mw > NTB_NUM_MW) + return; + + dev_dbg(&ndev->pdev->dev, "Writing addr %Lx to BAR %d\n", addr, + MW_TO_BAR(mw)); + + ndev->mw[mw].phys_addr = addr; + + switch (MW_TO_BAR(mw)) { + case NTB_BAR_23: + writeq(addr, ndev->reg_ofs.sbar2_xlat); + break; + case NTB_BAR_45: + writeq(addr, ndev->reg_ofs.sbar4_xlat); + break; + } +} + +/** + * ntb_ring_sdb() - Set the doorbell on the secondary/external side + * @ndev: pointer to ntb_device instance + * @db: doorbell to ring + * + * This function allows triggering of a doorbell on the secondary/external + * side that will initiate an interrupt on the remote host + * + * RETURNS: An appropriate -ERRNO error value on error, or zero for success. + */ +void ntb_ring_sdb(struct ntb_device *ndev, unsigned int db) +{ + dev_dbg(&ndev->pdev->dev, "%s: ringing doorbell %d\n", __func__, db); + + if (ndev->hw_type == BWD_HW) + writeq((u64) 1 << db, ndev->reg_ofs.sdb); + else + writew(((1 << ndev->bits_per_vector) - 1) << + (db * ndev->bits_per_vector), ndev->reg_ofs.sdb); +} + +static void ntb_link_event(struct ntb_device *ndev, int link_state) +{ + unsigned int event; + + if (ndev->link_status == link_state) + return; + + if (link_state == NTB_LINK_UP) { + u16 status; + + dev_info(&ndev->pdev->dev, "Link Up\n"); + ndev->link_status = NTB_LINK_UP; + event = NTB_EVENT_HW_LINK_UP; + + if (ndev->hw_type == BWD_HW) + status = readw(ndev->reg_ofs.lnk_stat); + else { + int rc = pci_read_config_word(ndev->pdev, + SNB_LINK_STATUS_OFFSET, + &status); + if (rc) + return; + } + dev_info(&ndev->pdev->dev, "Link Width %d, Link Speed %d\n", + (status & NTB_LINK_WIDTH_MASK) >> 4, + (status & NTB_LINK_SPEED_MASK)); + } else { + dev_info(&ndev->pdev->dev, "Link Down\n"); + ndev->link_status = NTB_LINK_DOWN; + event = NTB_EVENT_HW_LINK_DOWN; + } + + /* notify the upper layer if we have an event change */ + if (ndev->event_cb) + ndev->event_cb(ndev->ntb_transport, event); +} + +static int ntb_link_status(struct ntb_device *ndev) +{ + int link_state; + + if (ndev->hw_type == BWD_HW) { + u32 ntb_cntl; + + ntb_cntl = readl(ndev->reg_ofs.lnk_cntl); + if (ntb_cntl & BWD_CNTL_LINK_DOWN) + link_state = NTB_LINK_DOWN; + else + link_state = NTB_LINK_UP; + } else { + u16 status; + int rc; + + rc = pci_read_config_word(ndev->pdev, SNB_LINK_STATUS_OFFSET, + &status); + if (rc) + return rc; + + if (status & NTB_LINK_STATUS_ACTIVE) + link_state = NTB_LINK_UP; + else + link_state = NTB_LINK_DOWN; + } + + ntb_link_event(ndev, link_state); + + return 0; +} + +/* BWD doesn't have link status interrupt, poll on that platform */ +static void bwd_link_poll(struct work_struct *work) +{ + struct ntb_device *ndev = container_of(work, struct ntb_device, + hb_timer.work); + unsigned long ts = jiffies; + + /* If we haven't gotten an interrupt in a while, check the BWD link + * status bit + */ + if (ts > ndev->last_ts + NTB_HB_TIMEOUT) { + int rc = ntb_link_status(ndev); + if (rc) + dev_err(&ndev->pdev->dev, + "Error determining link status\n"); + } + + schedule_delayed_work(&ndev->hb_timer, NTB_HB_TIMEOUT); +} + +static int ntb_xeon_setup(struct ntb_device *ndev) +{ + int rc; + u8 val; + + ndev->hw_type = SNB_HW; + + rc = pci_read_config_byte(ndev->pdev, NTB_PPD_OFFSET, &val); + if (rc) + return rc; + + switch (val & SNB_PPD_CONN_TYPE) { + case NTB_CONN_B2B: + ndev->conn_type = NTB_CONN_B2B; + break; + case NTB_CONN_CLASSIC: + case NTB_CONN_RP: + default: + dev_err(&ndev->pdev->dev, "Only B2B supported at this time\n"); + return -EINVAL; + } + + if (val & SNB_PPD_DEV_TYPE) + ndev->dev_type = NTB_DEV_DSD; + else + ndev->dev_type = NTB_DEV_USD; + + ndev->reg_ofs.pdb = ndev->reg_base + SNB_PDOORBELL_OFFSET; + ndev->reg_ofs.pdb_mask = ndev->reg_base + SNB_PDBMSK_OFFSET; + ndev->reg_ofs.sbar2_xlat = ndev->reg_base + SNB_SBAR2XLAT_OFFSET; + ndev->reg_ofs.sbar4_xlat = ndev->reg_base + SNB_SBAR4XLAT_OFFSET; + ndev->reg_ofs.lnk_cntl = ndev->reg_base + SNB_NTBCNTL_OFFSET; + ndev->reg_ofs.lnk_stat = ndev->reg_base + SNB_LINK_STATUS_OFFSET; + ndev->reg_ofs.spad_read = ndev->reg_base + SNB_SPAD_OFFSET; + ndev->reg_ofs.spci_cmd = ndev->reg_base + SNB_PCICMD_OFFSET; + + if (ndev->conn_type == NTB_CONN_B2B) { + ndev->reg_ofs.sdb = ndev->reg_base + SNB_B2B_DOORBELL_OFFSET; + ndev->reg_ofs.spad_write = ndev->reg_base + SNB_B2B_SPAD_OFFSET; + ndev->limits.max_spads = SNB_MAX_SPADS; + } else { + ndev->reg_ofs.sdb = ndev->reg_base + SNB_SDOORBELL_OFFSET; + ndev->reg_ofs.spad_write = ndev->reg_base + SNB_SPAD_OFFSET; + ndev->limits.max_spads = SNB_MAX_COMPAT_SPADS; + } + + ndev->limits.max_db_bits = SNB_MAX_DB_BITS; + ndev->limits.msix_cnt = SNB_MSIX_CNT; + ndev->bits_per_vector = SNB_DB_BITS_PER_VEC; + + return 0; +} + +static int ntb_bwd_setup(struct ntb_device *ndev) +{ + int rc; + u32 val; + + ndev->hw_type = BWD_HW; + + rc = pci_read_config_dword(ndev->pdev, NTB_PPD_OFFSET, &val); + if (rc) + return rc; + + switch ((val & BWD_PPD_CONN_TYPE) >> 8) { + case NTB_CONN_B2B: + ndev->conn_type = NTB_CONN_B2B; + break; + case NTB_CONN_RP: + default: + dev_err(&ndev->pdev->dev, "Only B2B supported at this time\n"); + return -EINVAL; + } + + if (val & BWD_PPD_DEV_TYPE) + ndev->dev_type = NTB_DEV_DSD; + else + ndev->dev_type = NTB_DEV_USD; + + /* Initiate PCI-E link training */ + rc = pci_write_config_dword(ndev->pdev, NTB_PPD_OFFSET, + val | BWD_PPD_INIT_LINK); + if (rc) + return rc; + + ndev->reg_ofs.pdb = ndev->reg_base + BWD_PDOORBELL_OFFSET; + ndev->reg_ofs.pdb_mask = ndev->reg_base + BWD_PDBMSK_OFFSET; + ndev->reg_ofs.sbar2_xlat = ndev->reg_base + BWD_SBAR2XLAT_OFFSET; + ndev->reg_ofs.sbar4_xlat = ndev->reg_base + BWD_SBAR4XLAT_OFFSET; + ndev->reg_ofs.lnk_cntl = ndev->reg_base + BWD_NTBCNTL_OFFSET; + ndev->reg_ofs.lnk_stat = ndev->reg_base + BWD_LINK_STATUS_OFFSET; + ndev->reg_ofs.spad_read = ndev->reg_base + BWD_SPAD_OFFSET; + ndev->reg_ofs.spci_cmd = ndev->reg_base + BWD_PCICMD_OFFSET; + + if (ndev->conn_type == NTB_CONN_B2B) { + ndev->reg_ofs.sdb = ndev->reg_base + BWD_B2B_DOORBELL_OFFSET; + ndev->reg_ofs.spad_write = ndev->reg_base + BWD_B2B_SPAD_OFFSET; + ndev->limits.max_spads = BWD_MAX_SPADS; + } else { + ndev->reg_ofs.sdb = ndev->reg_base + BWD_PDOORBELL_OFFSET; + ndev->reg_ofs.spad_write = ndev->reg_base + BWD_SPAD_OFFSET; + ndev->limits.max_spads = BWD_MAX_COMPAT_SPADS; + } + + ndev->limits.max_db_bits = BWD_MAX_DB_BITS; + ndev->limits.msix_cnt = BWD_MSIX_CNT; + ndev->bits_per_vector = BWD_DB_BITS_PER_VEC; + + /* Since bwd doesn't have a link interrupt, setup a poll timer */ + INIT_DELAYED_WORK(&ndev->hb_timer, bwd_link_poll); + schedule_delayed_work(&ndev->hb_timer, NTB_HB_TIMEOUT); + + return 0; +} + +static int ntb_device_setup(struct ntb_device *ndev) +{ + int rc; + + switch (ndev->pdev->device) { + case PCI_DEVICE_ID_INTEL_NTB_2ND_SNB: + case PCI_DEVICE_ID_INTEL_NTB_RP_JSF: + case PCI_DEVICE_ID_INTEL_NTB_RP_SNB: + case PCI_DEVICE_ID_INTEL_NTB_CLASSIC_JSF: + case PCI_DEVICE_ID_INTEL_NTB_CLASSIC_SNB: + case PCI_DEVICE_ID_INTEL_NTB_B2B_JSF: + case PCI_DEVICE_ID_INTEL_NTB_B2B_SNB: + rc = ntb_xeon_setup(ndev); + break; + case PCI_DEVICE_ID_INTEL_NTB_B2B_BWD: + rc = ntb_bwd_setup(ndev); + break; + default: + rc = -ENODEV; + } + + /* Enable Bus Master and Memory Space on the secondary side */ + writew(PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER, ndev->reg_ofs.spci_cmd); + + return rc; +} + +static void ntb_device_free(struct ntb_device *ndev) +{ + if (ndev->hw_type == BWD_HW) + cancel_delayed_work_sync(&ndev->hb_timer); +} + +static irqreturn_t bwd_callback_msix_irq(int irq, void *data) +{ + struct ntb_db_cb *db_cb = data; + struct ntb_device *ndev = db_cb->ndev; + + dev_dbg(&ndev->pdev->dev, "MSI-X irq %d received for DB %d\n", irq, + db_cb->db_num); + + if (db_cb->callback) + db_cb->callback(db_cb->data, db_cb->db_num); + + /* No need to check for the specific HB irq, any interrupt means + * we're connected. + */ + ndev->last_ts = jiffies; + + writeq((u64) 1 << db_cb->db_num, ndev->reg_ofs.pdb); + + return IRQ_HANDLED; +} + +static irqreturn_t xeon_callback_msix_irq(int irq, void *data) +{ + struct ntb_db_cb *db_cb = data; + struct ntb_device *ndev = db_cb->ndev; + + dev_dbg(&ndev->pdev->dev, "MSI-X irq %d received for DB %d\n", irq, + db_cb->db_num); + + if (db_cb->callback) + db_cb->callback(db_cb->data, db_cb->db_num); + + /* On Sandybridge, there are 16 bits in the interrupt register + * but only 4 vectors. So, 5 bits are assigned to the first 3 + * vectors, with the 4th having a single bit for link + * interrupts. + */ + writew(((1 << ndev->bits_per_vector) - 1) << + (db_cb->db_num * ndev->bits_per_vector), ndev->reg_ofs.pdb); + + return IRQ_HANDLED; +} + +/* Since we do not have a HW doorbell in BWD, this is only used in JF/JT */ +static irqreturn_t xeon_event_msix_irq(int irq, void *dev) +{ + struct ntb_device *ndev = dev; + int rc; + + dev_dbg(&ndev->pdev->dev, "MSI-X irq %d received for Events\n", irq); + + rc = ntb_link_status(ndev); + if (rc) + dev_err(&ndev->pdev->dev, "Error determining link status\n"); + + /* bit 15 is always the link bit */ + writew(1 << ndev->limits.max_db_bits, ndev->reg_ofs.pdb); + + return IRQ_HANDLED; +} + +static irqreturn_t ntb_interrupt(int irq, void *dev) +{ + struct ntb_device *ndev = dev; + unsigned int i = 0; + + if (ndev->hw_type == BWD_HW) { + u64 pdb = readq(ndev->reg_ofs.pdb); + + dev_dbg(&ndev->pdev->dev, "irq %d - pdb = %Lx\n", irq, pdb); + + while (pdb) { + i = __ffs(pdb); + pdb &= pdb - 1; + bwd_callback_msix_irq(irq, &ndev->db_cb[i]); + } + } else { + u16 pdb = readw(ndev->reg_ofs.pdb); + + dev_dbg(&ndev->pdev->dev, "irq %d - pdb = %x sdb %x\n", irq, + pdb, readw(ndev->reg_ofs.sdb)); + + if (pdb & SNB_DB_HW_LINK) { + xeon_event_msix_irq(irq, dev); + pdb &= ~SNB_DB_HW_LINK; + } + + while (pdb) { + i = __ffs(pdb); + pdb &= pdb - 1; + xeon_callback_msix_irq(irq, &ndev->db_cb[i]); + } + } + + return IRQ_HANDLED; +} + +static int ntb_setup_msix(struct ntb_device *ndev) +{ + struct pci_dev *pdev = ndev->pdev; + struct msix_entry *msix; + int msix_entries; + int rc, i, pos; + u16 val; + + pos = pci_find_capability(pdev, PCI_CAP_ID_MSIX); + if (!pos) { + rc = -EIO; + goto err; + } + + rc = pci_read_config_word(pdev, pos + PCI_MSIX_FLAGS, &val); + if (rc) + goto err; + + msix_entries = msix_table_size(val); + if (msix_entries > ndev->limits.msix_cnt) { + rc = -EINVAL; + goto err; + } + + ndev->msix_entries = kmalloc(sizeof(struct msix_entry) * msix_entries, + GFP_KERNEL); + if (!ndev->msix_entries) { + rc = -ENOMEM; + goto err; + } + + for (i = 0; i < msix_entries; i++) + ndev->msix_entries[i].entry = i; + + rc = pci_enable_msix(pdev, ndev->msix_entries, msix_entries); + if (rc < 0) + goto err1; + if (rc > 0) { + /* On SNB, the link interrupt is always tied to 4th vector. If + * we can't get all 4, then we can't use MSI-X. + */ + if (ndev->hw_type != BWD_HW) { + rc = -EIO; + goto err1; + } + + dev_warn(&pdev->dev, + "Only %d MSI-X vectors. Limiting the number of queues to that number.\n", + rc); + msix_entries = rc; + } + + for (i = 0; i < msix_entries; i++) { + msix = &ndev->msix_entries[i]; + WARN_ON(!msix->vector); + + /* Use the last MSI-X vector for Link status */ + if (ndev->hw_type == BWD_HW) { + rc = request_irq(msix->vector, bwd_callback_msix_irq, 0, + "ntb-callback-msix", &ndev->db_cb[i]); + if (rc) + goto err2; + } else { + if (i == msix_entries - 1) { + rc = request_irq(msix->vector, + xeon_event_msix_irq, 0, + "ntb-event-msix", ndev); + if (rc) + goto err2; + } else { + rc = request_irq(msix->vector, + xeon_callback_msix_irq, 0, + "ntb-callback-msix", + &ndev->db_cb[i]); + if (rc) + goto err2; + } + } + } + + ndev->num_msix = msix_entries; + if (ndev->hw_type == BWD_HW) + ndev->max_cbs = msix_entries; + else + ndev->max_cbs = msix_entries - 1; + + return 0; + +err2: + while (--i >= 0) { + msix = &ndev->msix_entries[i]; + if (ndev->hw_type != BWD_HW && i == ndev->num_msix - 1) + free_irq(msix->vector, ndev); + else + free_irq(msix->vector, &ndev->db_cb[i]); + } + pci_disable_msix(pdev); +err1: + kfree(ndev->msix_entries); + dev_err(&pdev->dev, "Error allocating MSI-X interrupt\n"); +err: + ndev->num_msix = 0; + return rc; +} + +static int ntb_setup_msi(struct ntb_device *ndev) +{ + struct pci_dev *pdev = ndev->pdev; + int rc; + + rc = pci_enable_msi(pdev); + if (rc) + return rc; + + rc = request_irq(pdev->irq, ntb_interrupt, 0, "ntb-msi", ndev); + if (rc) { + pci_disable_msi(pdev); + dev_err(&pdev->dev, "Error allocating MSI interrupt\n"); + return rc; + } + + return 0; +} + +static int ntb_setup_intx(struct ntb_device *ndev) +{ + struct pci_dev *pdev = ndev->pdev; + int rc; + + pci_msi_off(pdev); + + /* Verify intx is enabled */ + pci_intx(pdev, 1); + + rc = request_irq(pdev->irq, ntb_interrupt, IRQF_SHARED, "ntb-intx", + ndev); + if (rc) + return rc; + + return 0; +} + +static int ntb_setup_interrupts(struct ntb_device *ndev) +{ + int rc; + + /* On BWD, disable all interrupts. On SNB, disable all but Link + * Interrupt. The rest will be unmasked as callbacks are registered. + */ + if (ndev->hw_type == BWD_HW) + writeq(~0, ndev->reg_ofs.pdb_mask); + else + writew(~(1 << ndev->limits.max_db_bits), + ndev->reg_ofs.pdb_mask); + + rc = ntb_setup_msix(ndev); + if (!rc) + goto done; + + ndev->bits_per_vector = 1; + ndev->max_cbs = ndev->limits.max_db_bits; + + rc = ntb_setup_msi(ndev); + if (!rc) + goto done; + + rc = ntb_setup_intx(ndev); + if (rc) { + dev_err(&ndev->pdev->dev, "no usable interrupts\n"); + return rc; + } + +done: + return 0; +} + +static void ntb_free_interrupts(struct ntb_device *ndev) +{ + struct pci_dev *pdev = ndev->pdev; + + /* mask interrupts */ + if (ndev->hw_type == BWD_HW) + writeq(~0, ndev->reg_ofs.pdb_mask); + else + writew(~0, ndev->reg_ofs.pdb_mask); + + if (ndev->num_msix) { + struct msix_entry *msix; + u32 i; + + for (i = 0; i < ndev->num_msix; i++) { + msix = &ndev->msix_entries[i]; + if (ndev->hw_type != BWD_HW && i == ndev->num_msix - 1) + free_irq(msix->vector, ndev); + else + free_irq(msix->vector, &ndev->db_cb[i]); + } + pci_disable_msix(pdev); + } else { + free_irq(pdev->irq, ndev); + + if (pci_dev_msi_enabled(pdev)) + pci_disable_msi(pdev); + } +} + +static int ntb_create_callbacks(struct ntb_device *ndev) +{ + int i; + + /* Checken-egg issue. We won't know how many callbacks are necessary + * until we see how many MSI-X vectors we get, but these pointers need + * to be passed into the MSI-X register fucntion. So, we allocate the + * max, knowing that they might not all be used, to work around this. + */ + ndev->db_cb = kcalloc(ndev->limits.max_db_bits, + sizeof(struct ntb_db_cb), + GFP_KERNEL); + if (!ndev->db_cb) + return -ENOMEM; + + for (i = 0; i < ndev->limits.max_db_bits; i++) { + ndev->db_cb[i].db_num = i; + ndev->db_cb[i].ndev = ndev; + } + + return 0; +} + +static void ntb_free_callbacks(struct ntb_device *ndev) +{ + int i; + + for (i = 0; i < ndev->limits.max_db_bits; i++) + ntb_unregister_db_callback(ndev, i); + + kfree(ndev->db_cb); +} + +static int ntb_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) +{ + struct ntb_device *ndev; + int rc, i; + + ndev = kzalloc(sizeof(struct ntb_device), GFP_KERNEL); + if (!ndev) + return -ENOMEM; + + ndev->pdev = pdev; + ndev->link_status = NTB_LINK_DOWN; + pci_set_drvdata(pdev, ndev); + + rc = pci_enable_device(pdev); + if (rc) + goto err; + + pci_set_master(ndev->pdev); + + rc = pci_request_selected_regions(pdev, NTB_BAR_MASK, KBUILD_MODNAME); + if (rc) + goto err1; + + ndev->reg_base = pci_ioremap_bar(pdev, NTB_BAR_MMIO); + if (!ndev->reg_base) { + dev_warn(&pdev->dev, "Cannot remap BAR 0\n"); + rc = -EIO; + goto err2; + } + + for (i = 0; i < NTB_NUM_MW; i++) { + ndev->mw[i].bar_sz = pci_resource_len(pdev, MW_TO_BAR(i)); + ndev->mw[i].vbase = + ioremap_wc(pci_resource_start(pdev, MW_TO_BAR(i)), + ndev->mw[i].bar_sz); + dev_info(&pdev->dev, "MW %d size %d\n", i, + (u32) pci_resource_len(pdev, MW_TO_BAR(i))); + if (!ndev->mw[i].vbase) { + dev_warn(&pdev->dev, "Cannot remap BAR %d\n", + MW_TO_BAR(i)); + rc = -EIO; + goto err3; + } + } + + rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(64)); + if (rc) { + rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); + if (rc) + goto err3; + + dev_warn(&pdev->dev, "Cannot DMA highmem\n"); + } + + rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64)); + if (rc) { + rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)); + if (rc) + goto err3; + + dev_warn(&pdev->dev, "Cannot DMA consistent highmem\n"); + } + + rc = ntb_device_setup(ndev); + if (rc) + goto err3; + + rc = ntb_create_callbacks(ndev); + if (rc) + goto err4; + + rc = ntb_setup_interrupts(ndev); + if (rc) + goto err5; + + /* The scratchpad registers keep the values between rmmod/insmod, + * blast them now + */ + for (i = 0; i < ndev->limits.max_spads; i++) { + ntb_write_local_spad(ndev, i, 0); + ntb_write_remote_spad(ndev, i, 0); + } + + rc = ntb_transport_init(pdev); + if (rc) + goto err6; + + /* Let's bring the NTB link up */ + writel(NTB_CNTL_BAR23_SNOOP | NTB_CNTL_BAR45_SNOOP, + ndev->reg_ofs.lnk_cntl); + + return 0; + +err6: + ntb_free_interrupts(ndev); +err5: + ntb_free_callbacks(ndev); +err4: + ntb_device_free(ndev); +err3: + for (i--; i >= 0; i--) + iounmap(ndev->mw[i].vbase); + iounmap(ndev->reg_base); +err2: + pci_release_selected_regions(pdev, NTB_BAR_MASK); +err1: + pci_disable_device(pdev); +err: + kfree(ndev); + + dev_err(&pdev->dev, "Error loading %s module\n", KBUILD_MODNAME); + return rc; +} + +static void ntb_pci_remove(struct pci_dev *pdev) +{ + struct ntb_device *ndev = pci_get_drvdata(pdev); + int i; + u32 ntb_cntl; + + /* Bring NTB link down */ + ntb_cntl = readl(ndev->reg_ofs.lnk_cntl); + ntb_cntl |= NTB_LINK_DISABLE; + writel(ntb_cntl, ndev->reg_ofs.lnk_cntl); + + ntb_transport_free(ndev->ntb_transport); + + ntb_free_interrupts(ndev); + ntb_free_callbacks(ndev); + ntb_device_free(ndev); + + for (i = 0; i < NTB_NUM_MW; i++) + iounmap(ndev->mw[i].vbase); + + iounmap(ndev->reg_base); + pci_release_selected_regions(pdev, NTB_BAR_MASK); + pci_disable_device(pdev); + kfree(ndev); +} + +static struct pci_driver ntb_pci_driver = { + .name = KBUILD_MODNAME, + .id_table = ntb_pci_tbl, + .probe = ntb_pci_probe, + .remove = ntb_pci_remove, +}; +module_pci_driver(ntb_pci_driver); diff --git a/drivers/ntb/ntb_hw.h b/drivers/ntb/ntb_hw.h new file mode 100644 index 000000000000..3a3038ca83e6 --- /dev/null +++ b/drivers/ntb/ntb_hw.h @@ -0,0 +1,181 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2012 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * BSD LICENSE + * + * Copyright(c) 2012 Intel Corporation. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copy + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * Intel PCIe NTB Linux driver + * + * Contact Information: + * Jon Mason <jon.mason@intel.com> + */ + +#define PCI_DEVICE_ID_INTEL_NTB_B2B_JSF 0x3725 +#define PCI_DEVICE_ID_INTEL_NTB_CLASSIC_JSF 0x3726 +#define PCI_DEVICE_ID_INTEL_NTB_RP_JSF 0x3727 +#define PCI_DEVICE_ID_INTEL_NTB_RP_SNB 0x3C08 +#define PCI_DEVICE_ID_INTEL_NTB_B2B_SNB 0x3C0D +#define PCI_DEVICE_ID_INTEL_NTB_CLASSIC_SNB 0x3C0E +#define PCI_DEVICE_ID_INTEL_NTB_2ND_SNB 0x3C0F +#define PCI_DEVICE_ID_INTEL_NTB_B2B_BWD 0x0C4E + +#define msix_table_size(control) ((control & PCI_MSIX_FLAGS_QSIZE)+1) + +#define NTB_BAR_MMIO 0 +#define NTB_BAR_23 2 +#define NTB_BAR_45 4 +#define NTB_BAR_MASK ((1 << NTB_BAR_MMIO) | (1 << NTB_BAR_23) |\ + (1 << NTB_BAR_45)) + +#define NTB_LINK_DOWN 0 +#define NTB_LINK_UP 1 + +#define NTB_HB_TIMEOUT msecs_to_jiffies(1000) + +#define NTB_NUM_MW 2 + +enum ntb_hw_event { + NTB_EVENT_SW_EVENT0 = 0, + NTB_EVENT_SW_EVENT1, + NTB_EVENT_SW_EVENT2, + NTB_EVENT_HW_ERROR, + NTB_EVENT_HW_LINK_UP, + NTB_EVENT_HW_LINK_DOWN, +}; + +struct ntb_mw { + dma_addr_t phys_addr; + void __iomem *vbase; + resource_size_t bar_sz; +}; + +struct ntb_db_cb { + void (*callback) (void *data, int db_num); + unsigned int db_num; + void *data; + struct ntb_device *ndev; +}; + +struct ntb_device { + struct pci_dev *pdev; + struct msix_entry *msix_entries; + void __iomem *reg_base; + struct ntb_mw mw[NTB_NUM_MW]; + struct { + unsigned int max_spads; + unsigned int max_db_bits; + unsigned int msix_cnt; + } limits; + struct { + void __iomem *pdb; + void __iomem *pdb_mask; + void __iomem *sdb; + void __iomem *sbar2_xlat; + void __iomem *sbar4_xlat; + void __iomem *spad_write; + void __iomem *spad_read; + void __iomem *lnk_cntl; + void __iomem *lnk_stat; + void __iomem *spci_cmd; + } reg_ofs; + struct ntb_transport *ntb_transport; + void (*event_cb)(void *handle, enum ntb_hw_event event); + + struct ntb_db_cb *db_cb; + unsigned char hw_type; + unsigned char conn_type; + unsigned char dev_type; + unsigned char num_msix; + unsigned char bits_per_vector; + unsigned char max_cbs; + unsigned char link_status; + struct delayed_work hb_timer; + unsigned long last_ts; +}; + +/** + * ntb_hw_link_status() - return the hardware link status + * @ndev: pointer to ntb_device instance + * + * Returns true if the hardware is connected to the remote system + * + * RETURNS: true or false based on the hardware link state + */ +static inline bool ntb_hw_link_status(struct ntb_device *ndev) +{ + return ndev->link_status == NTB_LINK_UP; +} + +/** + * ntb_query_pdev() - return the pci_dev pointer + * @ndev: pointer to ntb_device instance + * + * Given the ntb pointer return the pci_dev pointerfor the NTB hardware device + * + * RETURNS: a pointer to the ntb pci_dev + */ +static inline struct pci_dev *ntb_query_pdev(struct ntb_device *ndev) +{ + return ndev->pdev; +} + +struct ntb_device *ntb_register_transport(struct pci_dev *pdev, + void *transport); +void ntb_unregister_transport(struct ntb_device *ndev); +void ntb_set_mw_addr(struct ntb_device *ndev, unsigned int mw, u64 addr); +int ntb_register_db_callback(struct ntb_device *ndev, unsigned int idx, + void *data, void (*db_cb_func) (void *data, + int db_num)); +void ntb_unregister_db_callback(struct ntb_device *ndev, unsigned int idx); +int ntb_register_event_callback(struct ntb_device *ndev, + void (*event_cb_func) (void *handle, + enum ntb_hw_event event)); +void ntb_unregister_event_callback(struct ntb_device *ndev); +int ntb_get_max_spads(struct ntb_device *ndev); +int ntb_write_local_spad(struct ntb_device *ndev, unsigned int idx, u32 val); +int ntb_read_local_spad(struct ntb_device *ndev, unsigned int idx, u32 *val); +int ntb_write_remote_spad(struct ntb_device *ndev, unsigned int idx, u32 val); +int ntb_read_remote_spad(struct ntb_device *ndev, unsigned int idx, u32 *val); +void __iomem *ntb_get_mw_vbase(struct ntb_device *ndev, unsigned int mw); +resource_size_t ntb_get_mw_size(struct ntb_device *ndev, unsigned int mw); +void ntb_ring_sdb(struct ntb_device *ndev, unsigned int idx); +void *ntb_find_transport(struct pci_dev *pdev); + +int ntb_transport_init(struct pci_dev *pdev); +void ntb_transport_free(void *transport); diff --git a/drivers/ntb/ntb_regs.h b/drivers/ntb/ntb_regs.h new file mode 100644 index 000000000000..5bfa8c06c059 --- /dev/null +++ b/drivers/ntb/ntb_regs.h @@ -0,0 +1,139 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2012 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * BSD LICENSE + * + * Copyright(c) 2012 Intel Corporation. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copy + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * Intel PCIe NTB Linux driver + * + * Contact Information: + * Jon Mason <jon.mason@intel.com> + */ + +#define NTB_LINK_ENABLE 0x0000 +#define NTB_LINK_DISABLE 0x0002 +#define NTB_LINK_STATUS_ACTIVE 0x2000 +#define NTB_LINK_SPEED_MASK 0x000f +#define NTB_LINK_WIDTH_MASK 0x03f0 + +#define SNB_MSIX_CNT 4 +#define SNB_MAX_SPADS 16 +#define SNB_MAX_COMPAT_SPADS 8 +/* Reserve the uppermost bit for link interrupt */ +#define SNB_MAX_DB_BITS 15 +#define SNB_DB_BITS_PER_VEC 5 + +#define SNB_DB_HW_LINK 0x8000 + +#define SNB_PCICMD_OFFSET 0x0504 +#define SNB_DEVCTRL_OFFSET 0x0598 +#define SNB_LINK_STATUS_OFFSET 0x01A2 + +#define SNB_PBAR2LMT_OFFSET 0x0000 +#define SNB_PBAR4LMT_OFFSET 0x0008 +#define SNB_PBAR2XLAT_OFFSET 0x0010 +#define SNB_PBAR4XLAT_OFFSET 0x0018 +#define SNB_SBAR2LMT_OFFSET 0x0020 +#define SNB_SBAR4LMT_OFFSET 0x0028 +#define SNB_SBAR2XLAT_OFFSET 0x0030 +#define SNB_SBAR4XLAT_OFFSET 0x0038 +#define SNB_SBAR0BASE_OFFSET 0x0040 +#define SNB_SBAR2BASE_OFFSET 0x0048 +#define SNB_SBAR4BASE_OFFSET 0x0050 +#define SNB_NTBCNTL_OFFSET 0x0058 +#define SNB_SBDF_OFFSET 0x005C +#define SNB_PDOORBELL_OFFSET 0x0060 +#define SNB_PDBMSK_OFFSET 0x0062 +#define SNB_SDOORBELL_OFFSET 0x0064 +#define SNB_SDBMSK_OFFSET 0x0066 +#define SNB_USMEMMISS 0x0070 +#define SNB_SPAD_OFFSET 0x0080 +#define SNB_SPADSEMA4_OFFSET 0x00c0 +#define SNB_WCCNTRL_OFFSET 0x00e0 +#define SNB_B2B_SPAD_OFFSET 0x0100 +#define SNB_B2B_DOORBELL_OFFSET 0x0140 +#define SNB_B2B_XLAT_OFFSET 0x0144 + +#define BWD_MSIX_CNT 34 +#define BWD_MAX_SPADS 16 +#define BWD_MAX_COMPAT_SPADS 16 +#define BWD_MAX_DB_BITS 34 +#define BWD_DB_BITS_PER_VEC 1 + +#define BWD_PCICMD_OFFSET 0xb004 +#define BWD_MBAR23_OFFSET 0xb018 +#define BWD_MBAR45_OFFSET 0xb020 +#define BWD_DEVCTRL_OFFSET 0xb048 +#define BWD_LINK_STATUS_OFFSET 0xb052 + +#define BWD_SBAR2XLAT_OFFSET 0x0008 +#define BWD_SBAR4XLAT_OFFSET 0x0010 +#define BWD_PDOORBELL_OFFSET 0x0020 +#define BWD_PDBMSK_OFFSET 0x0028 +#define BWD_NTBCNTL_OFFSET 0x0060 +#define BWD_EBDF_OFFSET 0x0064 +#define BWD_SPAD_OFFSET 0x0080 +#define BWD_SPADSEMA_OFFSET 0x00c0 +#define BWD_STKYSPAD_OFFSET 0x00c4 +#define BWD_PBAR2XLAT_OFFSET 0x8008 +#define BWD_PBAR4XLAT_OFFSET 0x8010 +#define BWD_B2B_DOORBELL_OFFSET 0x8020 +#define BWD_B2B_SPAD_OFFSET 0x8080 +#define BWD_B2B_SPADSEMA_OFFSET 0x80c0 +#define BWD_B2B_STKYSPAD_OFFSET 0x80c4 + +#define NTB_CNTL_BAR23_SNOOP (1 << 2) +#define NTB_CNTL_BAR45_SNOOP (1 << 6) +#define BWD_CNTL_LINK_DOWN (1 << 16) + +#define NTB_PPD_OFFSET 0x00D4 +#define SNB_PPD_CONN_TYPE 0x0003 +#define SNB_PPD_DEV_TYPE 0x0010 +#define BWD_PPD_INIT_LINK 0x0008 +#define BWD_PPD_CONN_TYPE 0x0300 +#define BWD_PPD_DEV_TYPE 0x1000 + +#define BWD_PBAR2XLAT_USD_ADDR 0x0000004000000000 +#define BWD_PBAR4XLAT_USD_ADDR 0x0000008000000000 +#define BWD_MBAR23_USD_ADDR 0x000000410000000C +#define BWD_MBAR45_USD_ADDR 0x000000810000000C +#define BWD_PBAR2XLAT_DSD_ADDR 0x0000004100000000 +#define BWD_PBAR4XLAT_DSD_ADDR 0x0000008100000000 +#define BWD_MBAR23_DSD_ADDR 0x000000400000000C +#define BWD_MBAR45_DSD_ADDR 0x000000800000000C diff --git a/drivers/ntb/ntb_transport.c b/drivers/ntb/ntb_transport.c new file mode 100644 index 000000000000..e0bdfd7f9930 --- /dev/null +++ b/drivers/ntb/ntb_transport.c @@ -0,0 +1,1441 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2012 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * BSD LICENSE + * + * Copyright(c) 2012 Intel Corporation. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copy + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * Intel PCIe NTB Linux driver + * + * Contact Information: + * Jon Mason <jon.mason@intel.com> + */ +#include <linux/debugfs.h> +#include <linux/delay.h> +#include <linux/dma-mapping.h> +#include <linux/errno.h> +#include <linux/export.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/slab.h> +#include <linux/types.h> +#include <linux/ntb.h> +#include "ntb_hw.h" + +#define NTB_TRANSPORT_VERSION 2 + +static unsigned int transport_mtu = 0x401E; +module_param(transport_mtu, uint, 0644); +MODULE_PARM_DESC(transport_mtu, "Maximum size of NTB transport packets"); + +static unsigned char max_num_clients = 2; +module_param(max_num_clients, byte, 0644); +MODULE_PARM_DESC(max_num_clients, "Maximum number of NTB transport clients"); + +struct ntb_queue_entry { + /* ntb_queue list reference */ + struct list_head entry; + /* pointers to data to be transfered */ + void *cb_data; + void *buf; + unsigned int len; + unsigned int flags; +}; + +struct ntb_rx_info { + unsigned int entry; +}; + +struct ntb_transport_qp { + struct ntb_transport *transport; + struct ntb_device *ndev; + void *cb_data; + + bool client_ready; + bool qp_link; + u8 qp_num; /* Only 64 QP's are allowed. 0-63 */ + + struct ntb_rx_info __iomem *rx_info; + struct ntb_rx_info *remote_rx_info; + + void (*tx_handler) (struct ntb_transport_qp *qp, void *qp_data, + void *data, int len); + struct list_head tx_free_q; + spinlock_t ntb_tx_free_q_lock; + void __iomem *tx_mw; + unsigned int tx_index; + unsigned int tx_max_entry; + unsigned int tx_max_frame; + + void (*rx_handler) (struct ntb_transport_qp *qp, void *qp_data, + void *data, int len); + struct tasklet_struct rx_work; + struct list_head rx_pend_q; + struct list_head rx_free_q; + spinlock_t ntb_rx_pend_q_lock; + spinlock_t ntb_rx_free_q_lock; + void *rx_buff; + unsigned int rx_index; + unsigned int rx_max_entry; + unsigned int rx_max_frame; + + void (*event_handler) (void *data, int status); + struct delayed_work link_work; + struct work_struct link_cleanup; + + struct dentry *debugfs_dir; + struct dentry *debugfs_stats; + + /* Stats */ + u64 rx_bytes; + u64 rx_pkts; + u64 rx_ring_empty; + u64 rx_err_no_buf; + u64 rx_err_oflow; + u64 rx_err_ver; + u64 tx_bytes; + u64 tx_pkts; + u64 tx_ring_full; +}; + +struct ntb_transport_mw { + size_t size; + void *virt_addr; + dma_addr_t dma_addr; +}; + +struct ntb_transport_client_dev { + struct list_head entry; + struct device dev; +}; + +struct ntb_transport { + struct list_head entry; + struct list_head client_devs; + + struct ntb_device *ndev; + struct ntb_transport_mw mw[NTB_NUM_MW]; + struct ntb_transport_qp *qps; + unsigned int max_qps; + unsigned long qp_bitmap; + bool transport_link; + struct delayed_work link_work; + struct work_struct link_cleanup; + struct dentry *debugfs_dir; +}; + +enum { + DESC_DONE_FLAG = 1 << 0, + LINK_DOWN_FLAG = 1 << 1, +}; + +struct ntb_payload_header { + unsigned int ver; + unsigned int len; + unsigned int flags; +}; + +enum { + VERSION = 0, + MW0_SZ, + MW1_SZ, + NUM_QPS, + QP_LINKS, + MAX_SPAD, +}; + +#define QP_TO_MW(qp) ((qp) % NTB_NUM_MW) +#define NTB_QP_DEF_NUM_ENTRIES 100 +#define NTB_LINK_DOWN_TIMEOUT 10 + +static int ntb_match_bus(struct device *dev, struct device_driver *drv) +{ + return !strncmp(dev_name(dev), drv->name, strlen(drv->name)); +} + +static int ntb_client_probe(struct device *dev) +{ + const struct ntb_client *drv = container_of(dev->driver, + struct ntb_client, driver); + struct pci_dev *pdev = container_of(dev->parent, struct pci_dev, dev); + int rc = -EINVAL; + + get_device(dev); + if (drv && drv->probe) + rc = drv->probe(pdev); + if (rc) + put_device(dev); + + return rc; +} + +static int ntb_client_remove(struct device *dev) +{ + const struct ntb_client *drv = container_of(dev->driver, + struct ntb_client, driver); + struct pci_dev *pdev = container_of(dev->parent, struct pci_dev, dev); + + if (drv && drv->remove) + drv->remove(pdev); + + put_device(dev); + + return 0; +} + +static struct bus_type ntb_bus_type = { + .name = "ntb_bus", + .match = ntb_match_bus, + .probe = ntb_client_probe, + .remove = ntb_client_remove, +}; + +static LIST_HEAD(ntb_transport_list); + +static int ntb_bus_init(struct ntb_transport *nt) +{ + if (list_empty(&ntb_transport_list)) { + int rc = bus_register(&ntb_bus_type); + if (rc) + return rc; + } + + list_add(&nt->entry, &ntb_transport_list); + + return 0; +} + +static void ntb_bus_remove(struct ntb_transport *nt) +{ + struct ntb_transport_client_dev *client_dev, *cd; + + list_for_each_entry_safe(client_dev, cd, &nt->client_devs, entry) { + dev_err(client_dev->dev.parent, "%s still attached to bus, removing\n", + dev_name(&client_dev->dev)); + list_del(&client_dev->entry); + device_unregister(&client_dev->dev); + } + + list_del(&nt->entry); + + if (list_empty(&ntb_transport_list)) + bus_unregister(&ntb_bus_type); +} + +static void ntb_client_release(struct device *dev) +{ + struct ntb_transport_client_dev *client_dev; + client_dev = container_of(dev, struct ntb_transport_client_dev, dev); + + kfree(client_dev); +} + +/** + * ntb_unregister_client_dev - Unregister NTB client device + * @device_name: Name of NTB client device + * + * Unregister an NTB client device with the NTB transport layer + */ +void ntb_unregister_client_dev(char *device_name) +{ + struct ntb_transport_client_dev *client, *cd; + struct ntb_transport *nt; + + list_for_each_entry(nt, &ntb_transport_list, entry) + list_for_each_entry_safe(client, cd, &nt->client_devs, entry) + if (!strncmp(dev_name(&client->dev), device_name, + strlen(device_name))) { + list_del(&client->entry); + device_unregister(&client->dev); + } +} +EXPORT_SYMBOL_GPL(ntb_unregister_client_dev); + +/** + * ntb_register_client_dev - Register NTB client device + * @device_name: Name of NTB client device + * + * Register an NTB client device with the NTB transport layer + */ +int ntb_register_client_dev(char *device_name) +{ + struct ntb_transport_client_dev *client_dev; + struct ntb_transport *nt; + int rc; + + if (list_empty(&ntb_transport_list)) + return -ENODEV; + + list_for_each_entry(nt, &ntb_transport_list, entry) { + struct device *dev; + + client_dev = kzalloc(sizeof(struct ntb_transport_client_dev), + GFP_KERNEL); + if (!client_dev) { + rc = -ENOMEM; + goto err; + } + + dev = &client_dev->dev; + + /* setup and register client devices */ + dev_set_name(dev, "%s", device_name); + dev->bus = &ntb_bus_type; + dev->release = ntb_client_release; + dev->parent = &ntb_query_pdev(nt->ndev)->dev; + + rc = device_register(dev); + if (rc) { + kfree(client_dev); + goto err; + } + + list_add_tail(&client_dev->entry, &nt->client_devs); + } + + return 0; + +err: + ntb_unregister_client_dev(device_name); + + return rc; +} +EXPORT_SYMBOL_GPL(ntb_register_client_dev); + +/** + * ntb_register_client - Register NTB client driver + * @drv: NTB client driver to be registered + * + * Register an NTB client driver with the NTB transport layer + * + * RETURNS: An appropriate -ERRNO error value on error, or zero for success. + */ +int ntb_register_client(struct ntb_client *drv) +{ + drv->driver.bus = &ntb_bus_type; + + if (list_empty(&ntb_transport_list)) + return -ENODEV; + + return driver_register(&drv->driver); +} +EXPORT_SYMBOL_GPL(ntb_register_client); + +/** + * ntb_unregister_client - Unregister NTB client driver + * @drv: NTB client driver to be unregistered + * + * Unregister an NTB client driver with the NTB transport layer + * + * RETURNS: An appropriate -ERRNO error value on error, or zero for success. + */ +void ntb_unregister_client(struct ntb_client *drv) +{ + driver_unregister(&drv->driver); +} +EXPORT_SYMBOL_GPL(ntb_unregister_client); + +static ssize_t debugfs_read(struct file *filp, char __user *ubuf, size_t count, + loff_t *offp) +{ + struct ntb_transport_qp *qp; + char *buf; + ssize_t ret, out_offset, out_count; + + out_count = 600; + + buf = kmalloc(out_count, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + qp = filp->private_data; + out_offset = 0; + out_offset += snprintf(buf + out_offset, out_count - out_offset, + "NTB QP stats\n"); + out_offset += snprintf(buf + out_offset, out_count - out_offset, + "rx_bytes - \t%llu\n", qp->rx_bytes); + out_offset += snprintf(buf + out_offset, out_count - out_offset, + "rx_pkts - \t%llu\n", qp->rx_pkts); + out_offset += snprintf(buf + out_offset, out_count - out_offset, + "rx_ring_empty - %llu\n", qp->rx_ring_empty); + out_offset += snprintf(buf + out_offset, out_count - out_offset, + "rx_err_no_buf - %llu\n", qp->rx_err_no_buf); + out_offset += snprintf(buf + out_offset, out_count - out_offset, + "rx_err_oflow - \t%llu\n", qp->rx_err_oflow); + out_offset += snprintf(buf + out_offset, out_count - out_offset, + "rx_err_ver - \t%llu\n", qp->rx_err_ver); + out_offset += snprintf(buf + out_offset, out_count - out_offset, + "rx_buff - \t%p\n", qp->rx_buff); + out_offset += snprintf(buf + out_offset, out_count - out_offset, + "rx_index - \t%u\n", qp->rx_index); + out_offset += snprintf(buf + out_offset, out_count - out_offset, + "rx_max_entry - \t%u\n", qp->rx_max_entry); + + out_offset += snprintf(buf + out_offset, out_count - out_offset, + "tx_bytes - \t%llu\n", qp->tx_bytes); + out_offset += snprintf(buf + out_offset, out_count - out_offset, + "tx_pkts - \t%llu\n", qp->tx_pkts); + out_offset += snprintf(buf + out_offset, out_count - out_offset, + "tx_ring_full - \t%llu\n", qp->tx_ring_full); + out_offset += snprintf(buf + out_offset, out_count - out_offset, + "tx_mw - \t%p\n", qp->tx_mw); + out_offset += snprintf(buf + out_offset, out_count - out_offset, + "tx_index - \t%u\n", qp->tx_index); + out_offset += snprintf(buf + out_offset, out_count - out_offset, + "tx_max_entry - \t%u\n", qp->tx_max_entry); + + out_offset += snprintf(buf + out_offset, out_count - out_offset, + "\nQP Link %s\n", (qp->qp_link == NTB_LINK_UP) ? + "Up" : "Down"); + if (out_offset > out_count) + out_offset = out_count; + + ret = simple_read_from_buffer(ubuf, count, offp, buf, out_offset); + kfree(buf); + return ret; +} + +static const struct file_operations ntb_qp_debugfs_stats = { + .owner = THIS_MODULE, + .open = simple_open, + .read = debugfs_read, +}; + +static void ntb_list_add(spinlock_t *lock, struct list_head *entry, + struct list_head *list) +{ + unsigned long flags; + + spin_lock_irqsave(lock, flags); + list_add_tail(entry, list); + spin_unlock_irqrestore(lock, flags); +} + +static struct ntb_queue_entry *ntb_list_rm(spinlock_t *lock, + struct list_head *list) +{ + struct ntb_queue_entry *entry; + unsigned long flags; + + spin_lock_irqsave(lock, flags); + if (list_empty(list)) { + entry = NULL; + goto out; + } + entry = list_first_entry(list, struct ntb_queue_entry, entry); + list_del(&entry->entry); +out: + spin_unlock_irqrestore(lock, flags); + + return entry; +} + +static void ntb_transport_setup_qp_mw(struct ntb_transport *nt, + unsigned int qp_num) +{ + struct ntb_transport_qp *qp = &nt->qps[qp_num]; + unsigned int rx_size, num_qps_mw; + u8 mw_num = QP_TO_MW(qp_num); + unsigned int i; + + WARN_ON(nt->mw[mw_num].virt_addr == NULL); + + if (nt->max_qps % NTB_NUM_MW && mw_num < nt->max_qps % NTB_NUM_MW) + num_qps_mw = nt->max_qps / NTB_NUM_MW + 1; + else + num_qps_mw = nt->max_qps / NTB_NUM_MW; + + rx_size = (unsigned int) nt->mw[mw_num].size / num_qps_mw; + qp->remote_rx_info = nt->mw[mw_num].virt_addr + + (qp_num / NTB_NUM_MW * rx_size); + rx_size -= sizeof(struct ntb_rx_info); + + qp->rx_buff = qp->remote_rx_info + sizeof(struct ntb_rx_info); + qp->rx_max_frame = min(transport_mtu, rx_size); + qp->rx_max_entry = rx_size / qp->rx_max_frame; + qp->rx_index = 0; + + qp->remote_rx_info->entry = qp->rx_max_entry; + + /* setup the hdr offsets with 0's */ + for (i = 0; i < qp->rx_max_entry; i++) { + void *offset = qp->rx_buff + qp->rx_max_frame * (i + 1) - + sizeof(struct ntb_payload_header); + memset(offset, 0, sizeof(struct ntb_payload_header)); + } + + qp->rx_pkts = 0; + qp->tx_pkts = 0; +} + +static int ntb_set_mw(struct ntb_transport *nt, int num_mw, unsigned int size) +{ + struct ntb_transport_mw *mw = &nt->mw[num_mw]; + struct pci_dev *pdev = ntb_query_pdev(nt->ndev); + + /* Alloc memory for receiving data. Must be 4k aligned */ + mw->size = ALIGN(size, 4096); + + mw->virt_addr = dma_alloc_coherent(&pdev->dev, mw->size, &mw->dma_addr, + GFP_KERNEL); + if (!mw->virt_addr) { + dev_err(&pdev->dev, "Unable to allocate MW buffer of size %d\n", + (int) mw->size); + return -ENOMEM; + } + + /* Notify HW the memory location of the receive buffer */ + ntb_set_mw_addr(nt->ndev, num_mw, mw->dma_addr); + + return 0; +} + +static void ntb_qp_link_cleanup(struct work_struct *work) +{ + struct ntb_transport_qp *qp = container_of(work, + struct ntb_transport_qp, + link_cleanup); + struct ntb_transport *nt = qp->transport; + struct pci_dev *pdev = ntb_query_pdev(nt->ndev); + + if (qp->qp_link == NTB_LINK_DOWN) { + cancel_delayed_work_sync(&qp->link_work); + return; + } + + if (qp->event_handler) + qp->event_handler(qp->cb_data, NTB_LINK_DOWN); + + dev_info(&pdev->dev, "qp %d: Link Down\n", qp->qp_num); + qp->qp_link = NTB_LINK_DOWN; + + if (nt->transport_link == NTB_LINK_UP) + schedule_delayed_work(&qp->link_work, + msecs_to_jiffies(NTB_LINK_DOWN_TIMEOUT)); +} + +static void ntb_qp_link_down(struct ntb_transport_qp *qp) +{ + schedule_work(&qp->link_cleanup); +} + +static void ntb_transport_link_cleanup(struct work_struct *work) +{ + struct ntb_transport *nt = container_of(work, struct ntb_transport, + link_cleanup); + int i; + + if (nt->transport_link == NTB_LINK_DOWN) + cancel_delayed_work_sync(&nt->link_work); + else + nt->transport_link = NTB_LINK_DOWN; + + /* Pass along the info to any clients */ + for (i = 0; i < nt->max_qps; i++) + if (!test_bit(i, &nt->qp_bitmap)) + ntb_qp_link_down(&nt->qps[i]); + + /* The scratchpad registers keep the values if the remote side + * goes down, blast them now to give them a sane value the next + * time they are accessed + */ + for (i = 0; i < MAX_SPAD; i++) + ntb_write_local_spad(nt->ndev, i, 0); +} + +static void ntb_transport_event_callback(void *data, enum ntb_hw_event event) +{ + struct ntb_transport *nt = data; + + switch (event) { + case NTB_EVENT_HW_LINK_UP: + schedule_delayed_work(&nt->link_work, 0); + break; + case NTB_EVENT_HW_LINK_DOWN: + schedule_work(&nt->link_cleanup); + break; + default: + BUG(); + } +} + +static void ntb_transport_link_work(struct work_struct *work) +{ + struct ntb_transport *nt = container_of(work, struct ntb_transport, + link_work.work); + struct ntb_device *ndev = nt->ndev; + struct pci_dev *pdev = ntb_query_pdev(ndev); + u32 val; + int rc, i; + + /* send the local info */ + rc = ntb_write_remote_spad(ndev, VERSION, NTB_TRANSPORT_VERSION); + if (rc) { + dev_err(&pdev->dev, "Error writing %x to remote spad %d\n", + 0, VERSION); + goto out; + } + + rc = ntb_write_remote_spad(ndev, MW0_SZ, ntb_get_mw_size(ndev, 0)); + if (rc) { + dev_err(&pdev->dev, "Error writing %x to remote spad %d\n", + (u32) ntb_get_mw_size(ndev, 0), MW0_SZ); + goto out; + } + + rc = ntb_write_remote_spad(ndev, MW1_SZ, ntb_get_mw_size(ndev, 1)); + if (rc) { + dev_err(&pdev->dev, "Error writing %x to remote spad %d\n", + (u32) ntb_get_mw_size(ndev, 1), MW1_SZ); + goto out; + } + + rc = ntb_write_remote_spad(ndev, NUM_QPS, nt->max_qps); + if (rc) { + dev_err(&pdev->dev, "Error writing %x to remote spad %d\n", + nt->max_qps, NUM_QPS); + goto out; + } + + rc = ntb_read_local_spad(nt->ndev, QP_LINKS, &val); + if (rc) { + dev_err(&pdev->dev, "Error reading spad %d\n", QP_LINKS); + goto out; + } + + rc = ntb_write_remote_spad(ndev, QP_LINKS, val); + if (rc) { + dev_err(&pdev->dev, "Error writing %x to remote spad %d\n", + val, QP_LINKS); + goto out; + } + + /* Query the remote side for its info */ + rc = ntb_read_remote_spad(ndev, VERSION, &val); + if (rc) { + dev_err(&pdev->dev, "Error reading remote spad %d\n", VERSION); + goto out; + } + + if (val != NTB_TRANSPORT_VERSION) + goto out; + dev_dbg(&pdev->dev, "Remote version = %d\n", val); + + rc = ntb_read_remote_spad(ndev, NUM_QPS, &val); + if (rc) { + dev_err(&pdev->dev, "Error reading remote spad %d\n", NUM_QPS); + goto out; + } + + if (val != nt->max_qps) + goto out; + dev_dbg(&pdev->dev, "Remote max number of qps = %d\n", val); + + rc = ntb_read_remote_spad(ndev, MW0_SZ, &val); + if (rc) { + dev_err(&pdev->dev, "Error reading remote spad %d\n", MW0_SZ); + goto out; + } + + if (!val) + goto out; + dev_dbg(&pdev->dev, "Remote MW0 size = %d\n", val); + + rc = ntb_set_mw(nt, 0, val); + if (rc) + goto out; + + rc = ntb_read_remote_spad(ndev, MW1_SZ, &val); + if (rc) { + dev_err(&pdev->dev, "Error reading remote spad %d\n", MW1_SZ); + goto out; + } + + if (!val) + goto out; + dev_dbg(&pdev->dev, "Remote MW1 size = %d\n", val); + + rc = ntb_set_mw(nt, 1, val); + if (rc) + goto out; + + nt->transport_link = NTB_LINK_UP; + + for (i = 0; i < nt->max_qps; i++) { + struct ntb_transport_qp *qp = &nt->qps[i]; + + ntb_transport_setup_qp_mw(nt, i); + + if (qp->client_ready == NTB_LINK_UP) + schedule_delayed_work(&qp->link_work, 0); + } + + return; + +out: + if (ntb_hw_link_status(ndev)) + schedule_delayed_work(&nt->link_work, + msecs_to_jiffies(NTB_LINK_DOWN_TIMEOUT)); +} + +static void ntb_qp_link_work(struct work_struct *work) +{ + struct ntb_transport_qp *qp = container_of(work, + struct ntb_transport_qp, + link_work.work); + struct pci_dev *pdev = ntb_query_pdev(qp->ndev); + struct ntb_transport *nt = qp->transport; + int rc, val; + + WARN_ON(nt->transport_link != NTB_LINK_UP); + + rc = ntb_read_local_spad(nt->ndev, QP_LINKS, &val); + if (rc) { + dev_err(&pdev->dev, "Error reading spad %d\n", QP_LINKS); + return; + } + + rc = ntb_write_remote_spad(nt->ndev, QP_LINKS, val | 1 << qp->qp_num); + if (rc) + dev_err(&pdev->dev, "Error writing %x to remote spad %d\n", + val | 1 << qp->qp_num, QP_LINKS); + + /* query remote spad for qp ready bits */ + rc = ntb_read_remote_spad(nt->ndev, QP_LINKS, &val); + if (rc) + dev_err(&pdev->dev, "Error reading remote spad %d\n", QP_LINKS); + + dev_dbg(&pdev->dev, "Remote QP link status = %x\n", val); + + /* See if the remote side is up */ + if (1 << qp->qp_num & val) { + qp->qp_link = NTB_LINK_UP; + + dev_info(&pdev->dev, "qp %d: Link Up\n", qp->qp_num); + if (qp->event_handler) + qp->event_handler(qp->cb_data, NTB_LINK_UP); + } else if (nt->transport_link == NTB_LINK_UP) + schedule_delayed_work(&qp->link_work, + msecs_to_jiffies(NTB_LINK_DOWN_TIMEOUT)); +} + +static void ntb_transport_init_queue(struct ntb_transport *nt, + unsigned int qp_num) +{ + struct ntb_transport_qp *qp; + unsigned int num_qps_mw, tx_size; + u8 mw_num = QP_TO_MW(qp_num); + + qp = &nt->qps[qp_num]; + qp->qp_num = qp_num; + qp->transport = nt; + qp->ndev = nt->ndev; + qp->qp_link = NTB_LINK_DOWN; + qp->client_ready = NTB_LINK_DOWN; + qp->event_handler = NULL; + + if (nt->max_qps % NTB_NUM_MW && mw_num < nt->max_qps % NTB_NUM_MW) + num_qps_mw = nt->max_qps / NTB_NUM_MW + 1; + else + num_qps_mw = nt->max_qps / NTB_NUM_MW; + + tx_size = (unsigned int) ntb_get_mw_size(qp->ndev, mw_num) / num_qps_mw; + qp->rx_info = ntb_get_mw_vbase(nt->ndev, mw_num) + + (qp_num / NTB_NUM_MW * tx_size); + tx_size -= sizeof(struct ntb_rx_info); + + qp->tx_mw = qp->rx_info + sizeof(struct ntb_rx_info); + qp->tx_max_frame = min(transport_mtu, tx_size); + qp->tx_max_entry = tx_size / qp->tx_max_frame; + qp->tx_index = 0; + + if (nt->debugfs_dir) { + char debugfs_name[4]; + + snprintf(debugfs_name, 4, "qp%d", qp_num); + qp->debugfs_dir = debugfs_create_dir(debugfs_name, + nt->debugfs_dir); + + qp->debugfs_stats = debugfs_create_file("stats", S_IRUSR, + qp->debugfs_dir, qp, + &ntb_qp_debugfs_stats); + } + + INIT_DELAYED_WORK(&qp->link_work, ntb_qp_link_work); + INIT_WORK(&qp->link_cleanup, ntb_qp_link_cleanup); + + spin_lock_init(&qp->ntb_rx_pend_q_lock); + spin_lock_init(&qp->ntb_rx_free_q_lock); + spin_lock_init(&qp->ntb_tx_free_q_lock); + + INIT_LIST_HEAD(&qp->rx_pend_q); + INIT_LIST_HEAD(&qp->rx_free_q); + INIT_LIST_HEAD(&qp->tx_free_q); +} + +int ntb_transport_init(struct pci_dev *pdev) +{ + struct ntb_transport *nt; + int rc, i; + + nt = kzalloc(sizeof(struct ntb_transport), GFP_KERNEL); + if (!nt) + return -ENOMEM; + + if (debugfs_initialized()) + nt->debugfs_dir = debugfs_create_dir(KBUILD_MODNAME, NULL); + else + nt->debugfs_dir = NULL; + + nt->ndev = ntb_register_transport(pdev, nt); + if (!nt->ndev) { + rc = -EIO; + goto err; + } + + nt->max_qps = min(nt->ndev->max_cbs, max_num_clients); + + nt->qps = kcalloc(nt->max_qps, sizeof(struct ntb_transport_qp), + GFP_KERNEL); + if (!nt->qps) { + rc = -ENOMEM; + goto err1; + } + + nt->qp_bitmap = ((u64) 1 << nt->max_qps) - 1; + + for (i = 0; i < nt->max_qps; i++) + ntb_transport_init_queue(nt, i); + + INIT_DELAYED_WORK(&nt->link_work, ntb_transport_link_work); + INIT_WORK(&nt->link_cleanup, ntb_transport_link_cleanup); + + rc = ntb_register_event_callback(nt->ndev, + ntb_transport_event_callback); + if (rc) + goto err2; + + INIT_LIST_HEAD(&nt->client_devs); + rc = ntb_bus_init(nt); + if (rc) + goto err3; + + if (ntb_hw_link_status(nt->ndev)) + schedule_delayed_work(&nt->link_work, 0); + + return 0; + +err3: + ntb_unregister_event_callback(nt->ndev); +err2: + kfree(nt->qps); +err1: + ntb_unregister_transport(nt->ndev); +err: + debugfs_remove_recursive(nt->debugfs_dir); + kfree(nt); + return rc; +} + +void ntb_transport_free(void *transport) +{ + struct ntb_transport *nt = transport; + struct pci_dev *pdev; + int i; + + nt->transport_link = NTB_LINK_DOWN; + + /* verify that all the qp's are freed */ + for (i = 0; i < nt->max_qps; i++) + if (!test_bit(i, &nt->qp_bitmap)) + ntb_transport_free_queue(&nt->qps[i]); + + ntb_bus_remove(nt); + + cancel_delayed_work_sync(&nt->link_work); + + debugfs_remove_recursive(nt->debugfs_dir); + + ntb_unregister_event_callback(nt->ndev); + + pdev = ntb_query_pdev(nt->ndev); + + for (i = 0; i < NTB_NUM_MW; i++) + if (nt->mw[i].virt_addr) + dma_free_coherent(&pdev->dev, nt->mw[i].size, + nt->mw[i].virt_addr, + nt->mw[i].dma_addr); + + kfree(nt->qps); + ntb_unregister_transport(nt->ndev); + kfree(nt); +} + +static void ntb_rx_copy_task(struct ntb_transport_qp *qp, + struct ntb_queue_entry *entry, void *offset) +{ + void *cb_data = entry->cb_data; + unsigned int len = entry->len; + + memcpy(entry->buf, offset, entry->len); + + ntb_list_add(&qp->ntb_rx_free_q_lock, &entry->entry, &qp->rx_free_q); + + if (qp->rx_handler && qp->client_ready == NTB_LINK_UP) + qp->rx_handler(qp, qp->cb_data, cb_data, len); +} + +static int ntb_process_rxc(struct ntb_transport_qp *qp) +{ + struct ntb_payload_header *hdr; + struct ntb_queue_entry *entry; + void *offset; + + offset = qp->rx_buff + qp->rx_max_frame * qp->rx_index; + hdr = offset + qp->rx_max_frame - sizeof(struct ntb_payload_header); + + entry = ntb_list_rm(&qp->ntb_rx_pend_q_lock, &qp->rx_pend_q); + if (!entry) { + dev_dbg(&ntb_query_pdev(qp->ndev)->dev, + "no buffer - HDR ver %u, len %d, flags %x\n", + hdr->ver, hdr->len, hdr->flags); + qp->rx_err_no_buf++; + return -ENOMEM; + } + + if (!(hdr->flags & DESC_DONE_FLAG)) { + ntb_list_add(&qp->ntb_rx_pend_q_lock, &entry->entry, + &qp->rx_pend_q); + qp->rx_ring_empty++; + return -EAGAIN; + } + + if (hdr->ver != (u32) qp->rx_pkts) { + dev_dbg(&ntb_query_pdev(qp->ndev)->dev, + "qp %d: version mismatch, expected %llu - got %u\n", + qp->qp_num, qp->rx_pkts, hdr->ver); + ntb_list_add(&qp->ntb_rx_pend_q_lock, &entry->entry, + &qp->rx_pend_q); + qp->rx_err_ver++; + return -EIO; + } + + if (hdr->flags & LINK_DOWN_FLAG) { + ntb_qp_link_down(qp); + + ntb_list_add(&qp->ntb_rx_pend_q_lock, &entry->entry, + &qp->rx_pend_q); + goto out; + } + + dev_dbg(&ntb_query_pdev(qp->ndev)->dev, + "rx offset %u, ver %u - %d payload received, buf size %d\n", + qp->rx_index, hdr->ver, hdr->len, entry->len); + + if (hdr->len <= entry->len) { + entry->len = hdr->len; + ntb_rx_copy_task(qp, entry, offset); + } else { + ntb_list_add(&qp->ntb_rx_pend_q_lock, &entry->entry, + &qp->rx_pend_q); + + qp->rx_err_oflow++; + dev_dbg(&ntb_query_pdev(qp->ndev)->dev, + "RX overflow! Wanted %d got %d\n", + hdr->len, entry->len); + } + + qp->rx_bytes += hdr->len; + qp->rx_pkts++; + +out: + /* Ensure that the data is fully copied out before clearing the flag */ + wmb(); + hdr->flags = 0; + iowrite32(qp->rx_index, &qp->rx_info->entry); + + qp->rx_index++; + qp->rx_index %= qp->rx_max_entry; + + return 0; +} + +static void ntb_transport_rx(unsigned long data) +{ + struct ntb_transport_qp *qp = (struct ntb_transport_qp *)data; + int rc; + + do { + rc = ntb_process_rxc(qp); + } while (!rc); +} + +static void ntb_transport_rxc_db(void *data, int db_num) +{ + struct ntb_transport_qp *qp = data; + + dev_dbg(&ntb_query_pdev(qp->ndev)->dev, "%s: doorbell %d received\n", + __func__, db_num); + + tasklet_schedule(&qp->rx_work); +} + +static void ntb_tx_copy_task(struct ntb_transport_qp *qp, + struct ntb_queue_entry *entry, + void __iomem *offset) +{ + struct ntb_payload_header __iomem *hdr; + + memcpy_toio(offset, entry->buf, entry->len); + + hdr = offset + qp->tx_max_frame - sizeof(struct ntb_payload_header); + iowrite32(entry->len, &hdr->len); + iowrite32((u32) qp->tx_pkts, &hdr->ver); + + /* Ensure that the data is fully copied out before setting the flag */ + wmb(); + iowrite32(entry->flags | DESC_DONE_FLAG, &hdr->flags); + + ntb_ring_sdb(qp->ndev, qp->qp_num); + + /* The entry length can only be zero if the packet is intended to be a + * "link down" or similar. Since no payload is being sent in these + * cases, there is nothing to add to the completion queue. + */ + if (entry->len > 0) { + qp->tx_bytes += entry->len; + + if (qp->tx_handler) + qp->tx_handler(qp, qp->cb_data, entry->cb_data, + entry->len); + } + + ntb_list_add(&qp->ntb_tx_free_q_lock, &entry->entry, &qp->tx_free_q); +} + +static int ntb_process_tx(struct ntb_transport_qp *qp, + struct ntb_queue_entry *entry) +{ + void __iomem *offset; + + offset = qp->tx_mw + qp->tx_max_frame * qp->tx_index; + + dev_dbg(&ntb_query_pdev(qp->ndev)->dev, "%lld - offset %p, tx %u, entry len %d flags %x buff %p\n", + qp->tx_pkts, offset, qp->tx_index, entry->len, entry->flags, + entry->buf); + if (qp->tx_index == qp->remote_rx_info->entry) { + qp->tx_ring_full++; + return -EAGAIN; + } + + if (entry->len > qp->tx_max_frame - sizeof(struct ntb_payload_header)) { + if (qp->tx_handler) + qp->tx_handler(qp->cb_data, qp, NULL, -EIO); + + ntb_list_add(&qp->ntb_tx_free_q_lock, &entry->entry, + &qp->tx_free_q); + return 0; + } + + ntb_tx_copy_task(qp, entry, offset); + + qp->tx_index++; + qp->tx_index %= qp->tx_max_entry; + + qp->tx_pkts++; + + return 0; +} + +static void ntb_send_link_down(struct ntb_transport_qp *qp) +{ + struct pci_dev *pdev = ntb_query_pdev(qp->ndev); + struct ntb_queue_entry *entry; + int i, rc; + + if (qp->qp_link == NTB_LINK_DOWN) + return; + + qp->qp_link = NTB_LINK_DOWN; + dev_info(&pdev->dev, "qp %d: Link Down\n", qp->qp_num); + + for (i = 0; i < NTB_LINK_DOWN_TIMEOUT; i++) { + entry = ntb_list_rm(&qp->ntb_tx_free_q_lock, &qp->tx_free_q); + if (entry) + break; + msleep(100); + } + + if (!entry) + return; + + entry->cb_data = NULL; + entry->buf = NULL; + entry->len = 0; + entry->flags = LINK_DOWN_FLAG; + + rc = ntb_process_tx(qp, entry); + if (rc) + dev_err(&pdev->dev, "ntb: QP%d unable to send linkdown msg\n", + qp->qp_num); +} + +/** + * ntb_transport_create_queue - Create a new NTB transport layer queue + * @rx_handler: receive callback function + * @tx_handler: transmit callback function + * @event_handler: event callback function + * + * Create a new NTB transport layer queue and provide the queue with a callback + * routine for both transmit and receive. The receive callback routine will be + * used to pass up data when the transport has received it on the queue. The + * transmit callback routine will be called when the transport has completed the + * transmission of the data on the queue and the data is ready to be freed. + * + * RETURNS: pointer to newly created ntb_queue, NULL on error. + */ +struct ntb_transport_qp * +ntb_transport_create_queue(void *data, struct pci_dev *pdev, + const struct ntb_queue_handlers *handlers) +{ + struct ntb_queue_entry *entry; + struct ntb_transport_qp *qp; + struct ntb_transport *nt; + unsigned int free_queue; + int rc, i; + + nt = ntb_find_transport(pdev); + if (!nt) + goto err; + + free_queue = ffs(nt->qp_bitmap); + if (!free_queue) + goto err; + + /* decrement free_queue to make it zero based */ + free_queue--; + + clear_bit(free_queue, &nt->qp_bitmap); + + qp = &nt->qps[free_queue]; + qp->cb_data = data; + qp->rx_handler = handlers->rx_handler; + qp->tx_handler = handlers->tx_handler; + qp->event_handler = handlers->event_handler; + + for (i = 0; i < NTB_QP_DEF_NUM_ENTRIES; i++) { + entry = kzalloc(sizeof(struct ntb_queue_entry), GFP_ATOMIC); + if (!entry) + goto err1; + + ntb_list_add(&qp->ntb_rx_free_q_lock, &entry->entry, + &qp->rx_free_q); + } + + for (i = 0; i < NTB_QP_DEF_NUM_ENTRIES; i++) { + entry = kzalloc(sizeof(struct ntb_queue_entry), GFP_ATOMIC); + if (!entry) + goto err2; + + ntb_list_add(&qp->ntb_tx_free_q_lock, &entry->entry, + &qp->tx_free_q); + } + + tasklet_init(&qp->rx_work, ntb_transport_rx, (unsigned long) qp); + + rc = ntb_register_db_callback(qp->ndev, free_queue, qp, + ntb_transport_rxc_db); + if (rc) + goto err3; + + dev_info(&pdev->dev, "NTB Transport QP %d created\n", qp->qp_num); + + return qp; + +err3: + tasklet_disable(&qp->rx_work); +err2: + while ((entry = ntb_list_rm(&qp->ntb_tx_free_q_lock, &qp->tx_free_q))) + kfree(entry); +err1: + while ((entry = ntb_list_rm(&qp->ntb_rx_free_q_lock, &qp->rx_free_q))) + kfree(entry); + set_bit(free_queue, &nt->qp_bitmap); +err: + return NULL; +} +EXPORT_SYMBOL_GPL(ntb_transport_create_queue); + +/** + * ntb_transport_free_queue - Frees NTB transport queue + * @qp: NTB queue to be freed + * + * Frees NTB transport queue + */ +void ntb_transport_free_queue(struct ntb_transport_qp *qp) +{ + struct pci_dev *pdev = ntb_query_pdev(qp->ndev); + struct ntb_queue_entry *entry; + + if (!qp) + return; + + cancel_delayed_work_sync(&qp->link_work); + + ntb_unregister_db_callback(qp->ndev, qp->qp_num); + tasklet_disable(&qp->rx_work); + + while ((entry = ntb_list_rm(&qp->ntb_rx_free_q_lock, &qp->rx_free_q))) + kfree(entry); + + while ((entry = ntb_list_rm(&qp->ntb_rx_pend_q_lock, &qp->rx_pend_q))) { + dev_warn(&pdev->dev, "Freeing item from a non-empty queue\n"); + kfree(entry); + } + + while ((entry = ntb_list_rm(&qp->ntb_tx_free_q_lock, &qp->tx_free_q))) + kfree(entry); + + set_bit(qp->qp_num, &qp->transport->qp_bitmap); + + dev_info(&pdev->dev, "NTB Transport QP %d freed\n", qp->qp_num); +} +EXPORT_SYMBOL_GPL(ntb_transport_free_queue); + +/** + * ntb_transport_rx_remove - Dequeues enqueued rx packet + * @qp: NTB queue to be freed + * @len: pointer to variable to write enqueued buffers length + * + * Dequeues unused buffers from receive queue. Should only be used during + * shutdown of qp. + * + * RETURNS: NULL error value on error, or void* for success. + */ +void *ntb_transport_rx_remove(struct ntb_transport_qp *qp, unsigned int *len) +{ + struct ntb_queue_entry *entry; + void *buf; + + if (!qp || qp->client_ready == NTB_LINK_UP) + return NULL; + + entry = ntb_list_rm(&qp->ntb_rx_pend_q_lock, &qp->rx_pend_q); + if (!entry) + return NULL; + + buf = entry->cb_data; + *len = entry->len; + + ntb_list_add(&qp->ntb_rx_free_q_lock, &entry->entry, &qp->rx_free_q); + + return buf; +} +EXPORT_SYMBOL_GPL(ntb_transport_rx_remove); + +/** + * ntb_transport_rx_enqueue - Enqueue a new NTB queue entry + * @qp: NTB transport layer queue the entry is to be enqueued on + * @cb: per buffer pointer for callback function to use + * @data: pointer to data buffer that incoming packets will be copied into + * @len: length of the data buffer + * + * Enqueue a new receive buffer onto the transport queue into which a NTB + * payload can be received into. + * + * RETURNS: An appropriate -ERRNO error value on error, or zero for success. + */ +int ntb_transport_rx_enqueue(struct ntb_transport_qp *qp, void *cb, void *data, + unsigned int len) +{ + struct ntb_queue_entry *entry; + + if (!qp) + return -EINVAL; + + entry = ntb_list_rm(&qp->ntb_rx_free_q_lock, &qp->rx_free_q); + if (!entry) + return -ENOMEM; + + entry->cb_data = cb; + entry->buf = data; + entry->len = len; + + ntb_list_add(&qp->ntb_rx_pend_q_lock, &entry->entry, &qp->rx_pend_q); + + return 0; +} +EXPORT_SYMBOL_GPL(ntb_transport_rx_enqueue); + +/** + * ntb_transport_tx_enqueue - Enqueue a new NTB queue entry + * @qp: NTB transport layer queue the entry is to be enqueued on + * @cb: per buffer pointer for callback function to use + * @data: pointer to data buffer that will be sent + * @len: length of the data buffer + * + * Enqueue a new transmit buffer onto the transport queue from which a NTB + * payload will be transmitted. This assumes that a lock is behing held to + * serialize access to the qp. + * + * RETURNS: An appropriate -ERRNO error value on error, or zero for success. + */ +int ntb_transport_tx_enqueue(struct ntb_transport_qp *qp, void *cb, void *data, + unsigned int len) +{ + struct ntb_queue_entry *entry; + int rc; + + if (!qp || qp->qp_link != NTB_LINK_UP || !len) + return -EINVAL; + + entry = ntb_list_rm(&qp->ntb_tx_free_q_lock, &qp->tx_free_q); + if (!entry) + return -ENOMEM; + + entry->cb_data = cb; + entry->buf = data; + entry->len = len; + entry->flags = 0; + + rc = ntb_process_tx(qp, entry); + if (rc) + ntb_list_add(&qp->ntb_tx_free_q_lock, &entry->entry, + &qp->tx_free_q); + + return rc; +} +EXPORT_SYMBOL_GPL(ntb_transport_tx_enqueue); + +/** + * ntb_transport_link_up - Notify NTB transport of client readiness to use queue + * @qp: NTB transport layer queue to be enabled + * + * Notify NTB transport layer of client readiness to use queue + */ +void ntb_transport_link_up(struct ntb_transport_qp *qp) +{ + if (!qp) + return; + + qp->client_ready = NTB_LINK_UP; + + if (qp->transport->transport_link == NTB_LINK_UP) + schedule_delayed_work(&qp->link_work, 0); +} +EXPORT_SYMBOL_GPL(ntb_transport_link_up); + +/** + * ntb_transport_link_down - Notify NTB transport to no longer enqueue data + * @qp: NTB transport layer queue to be disabled + * + * Notify NTB transport layer of client's desire to no longer receive data on + * transport queue specified. It is the client's responsibility to ensure all + * entries on queue are purged or otherwise handled appropraitely. + */ +void ntb_transport_link_down(struct ntb_transport_qp *qp) +{ + struct pci_dev *pdev = ntb_query_pdev(qp->ndev); + int rc, val; + + if (!qp) + return; + + qp->client_ready = NTB_LINK_DOWN; + + rc = ntb_read_local_spad(qp->ndev, QP_LINKS, &val); + if (rc) { + dev_err(&pdev->dev, "Error reading spad %d\n", QP_LINKS); + return; + } + + rc = ntb_write_remote_spad(qp->ndev, QP_LINKS, + val & ~(1 << qp->qp_num)); + if (rc) + dev_err(&pdev->dev, "Error writing %x to remote spad %d\n", + val & ~(1 << qp->qp_num), QP_LINKS); + + if (qp->qp_link == NTB_LINK_UP) + ntb_send_link_down(qp); + else + cancel_delayed_work_sync(&qp->link_work); +} +EXPORT_SYMBOL_GPL(ntb_transport_link_down); + +/** + * ntb_transport_link_query - Query transport link state + * @qp: NTB transport layer queue to be queried + * + * Query connectivity to the remote system of the NTB transport queue + * + * RETURNS: true for link up or false for link down + */ +bool ntb_transport_link_query(struct ntb_transport_qp *qp) +{ + return qp->qp_link == NTB_LINK_UP; +} +EXPORT_SYMBOL_GPL(ntb_transport_link_query); + +/** + * ntb_transport_qp_num - Query the qp number + * @qp: NTB transport layer queue to be queried + * + * Query qp number of the NTB transport queue + * + * RETURNS: a zero based number specifying the qp number + */ +unsigned char ntb_transport_qp_num(struct ntb_transport_qp *qp) +{ + return qp->qp_num; +} +EXPORT_SYMBOL_GPL(ntb_transport_qp_num); + +/** + * ntb_transport_max_size - Query the max payload size of a qp + * @qp: NTB transport layer queue to be queried + * + * Query the maximum payload size permissible on the given qp + * + * RETURNS: the max payload size of a qp + */ +unsigned int ntb_transport_max_size(struct ntb_transport_qp *qp) +{ + return qp->tx_max_frame - sizeof(struct ntb_payload_header); +} +EXPORT_SYMBOL_GPL(ntb_transport_max_size); diff --git a/drivers/pcmcia/i82092.c b/drivers/pcmcia/i82092.c index 3578e1ca97a0..519c4d6003a6 100644 --- a/drivers/pcmcia/i82092.c +++ b/drivers/pcmcia/i82092.c @@ -133,8 +133,6 @@ static int i82092aa_pci_probe(struct pci_dev *dev, const struct pci_device_id *i goto err_out_free_res; } - pci_set_drvdata(dev, &sockets[i].socket); - for (i = 0; i<socket_count; i++) { sockets[i].socket.dev.parent = &dev->dev; sockets[i].socket.ops = &i82092aa_operations; @@ -164,14 +162,14 @@ err_out_disable: static void i82092aa_pci_remove(struct pci_dev *dev) { - struct pcmcia_socket *socket = pci_get_drvdata(dev); + int i; enter("i82092aa_pci_remove"); free_irq(dev->irq, i82092aa_interrupt); - if (socket) - pcmcia_unregister_socket(socket); + for (i = 0; i < socket_count; i++) + pcmcia_unregister_socket(&sockets[i].socket); leave("i82092aa_pci_remove"); } diff --git a/drivers/pcmcia/vrc4171_card.c b/drivers/pcmcia/vrc4171_card.c index 75806be344e5..d98a08612492 100644 --- a/drivers/pcmcia/vrc4171_card.c +++ b/drivers/pcmcia/vrc4171_card.c @@ -246,6 +246,7 @@ static int pccard_init(struct pcmcia_socket *sock) socket = &vrc4171_sockets[slot]; socket->csc_irq = search_nonuse_irq(); socket->io_irq = search_nonuse_irq(); + spin_lock_init(&socket->lock); return 0; } diff --git a/drivers/scsi/storvsc_drv.c b/drivers/scsi/storvsc_drv.c index 01440782feb2..270b3cf6f372 100644 --- a/drivers/scsi/storvsc_drv.c +++ b/drivers/scsi/storvsc_drv.c @@ -1410,13 +1410,13 @@ enum { static const struct hv_vmbus_device_id id_table[] = { /* SCSI guid */ - { VMBUS_DEVICE(0xd9, 0x63, 0x61, 0xba, 0xa1, 0x04, 0x29, 0x4d, - 0xb6, 0x05, 0x72, 0xe2, 0xff, 0xb1, 0xdc, 0x7f) - .driver_data = SCSI_GUID }, + { HV_SCSI_GUID, + .driver_data = SCSI_GUID + }, /* IDE guid */ - { VMBUS_DEVICE(0x32, 0x26, 0x41, 0x32, 0xcb, 0x86, 0xa2, 0x44, - 0x9b, 0x5c, 0x50, 0xd1, 0x41, 0x73, 0x54, 0xf5) - .driver_data = IDE_GUID }, + { HV_IDE_GUID, + .driver_data = IDE_GUID + }, { }, }; diff --git a/drivers/vme/vme.c b/drivers/vme/vme.c index 95a9f71d793e..5e6c7d74e19f 100644 --- a/drivers/vme/vme.c +++ b/drivers/vme/vme.c @@ -1376,6 +1376,7 @@ static int __vme_register_driver_bus(struct vme_driver *drv, return 0; err_reg: + put_device(&vdev->dev); kfree(vdev); err_devalloc: list_for_each_entry_safe(vdev, tmp, &drv->devices, drv_list) { diff --git a/drivers/w1/masters/ds1wm.c b/drivers/w1/masters/ds1wm.c index 7c294f4dc0ed..96cab6ac2b4e 100644 --- a/drivers/w1/masters/ds1wm.c +++ b/drivers/w1/masters/ds1wm.c @@ -13,6 +13,7 @@ #include <linux/module.h> #include <linux/interrupt.h> +#include <linux/io.h> #include <linux/irq.h> #include <linux/pm.h> #include <linux/platform_device.h> @@ -459,43 +460,34 @@ static int ds1wm_probe(struct platform_device *pdev) if (!pdev) return -ENODEV; - ds1wm_data = kzalloc(sizeof(*ds1wm_data), GFP_KERNEL); + ds1wm_data = devm_kzalloc(&pdev->dev, sizeof(*ds1wm_data), GFP_KERNEL); if (!ds1wm_data) return -ENOMEM; platform_set_drvdata(pdev, ds1wm_data); res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - ret = -ENXIO; - goto err0; - } - ds1wm_data->map = ioremap(res->start, resource_size(res)); - if (!ds1wm_data->map) { - ret = -ENOMEM; - goto err0; - } + if (!res) + return -ENXIO; + ds1wm_data->map = devm_ioremap(&pdev->dev, res->start, + resource_size(res)); + if (!ds1wm_data->map) + return -ENOMEM; /* calculate bus shift from mem resource */ ds1wm_data->bus_shift = resource_size(res) >> 3; ds1wm_data->pdev = pdev; ds1wm_data->cell = mfd_get_cell(pdev); - if (!ds1wm_data->cell) { - ret = -ENODEV; - goto err1; - } + if (!ds1wm_data->cell) + return -ENODEV; plat = pdev->dev.platform_data; - if (!plat) { - ret = -ENODEV; - goto err1; - } + if (!plat) + return -ENODEV; res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); - if (!res) { - ret = -ENXIO; - goto err1; - } + if (!res) + return -ENXIO; ds1wm_data->irq = res->start; ds1wm_data->int_en_reg_none = (plat->active_high ? DS1WM_INTEN_IAS : 0); ds1wm_data->reset_recover_delay = plat->reset_recover_delay; @@ -505,10 +497,10 @@ static int ds1wm_probe(struct platform_device *pdev) if (res->flags & IORESOURCE_IRQ_LOWEDGE) irq_set_irq_type(ds1wm_data->irq, IRQ_TYPE_EDGE_FALLING); - ret = request_irq(ds1wm_data->irq, ds1wm_isr, + ret = devm_request_irq(&pdev->dev, ds1wm_data->irq, ds1wm_isr, IRQF_DISABLED | IRQF_SHARED, "ds1wm", ds1wm_data); if (ret) - goto err1; + return ret; ds1wm_up(ds1wm_data); @@ -516,17 +508,12 @@ static int ds1wm_probe(struct platform_device *pdev) ret = w1_add_master_device(&ds1wm_master); if (ret) - goto err2; + goto err; return 0; -err2: +err: ds1wm_down(ds1wm_data); - free_irq(ds1wm_data->irq, ds1wm_data); -err1: - iounmap(ds1wm_data->map); -err0: - kfree(ds1wm_data); return ret; } @@ -560,9 +547,6 @@ static int ds1wm_remove(struct platform_device *pdev) w1_remove_master_device(&ds1wm_master); ds1wm_down(ds1wm_data); - free_irq(ds1wm_data->irq, ds1wm_data); - iounmap(ds1wm_data->map); - kfree(ds1wm_data); return 0; } diff --git a/drivers/w1/masters/ds2482.c b/drivers/w1/masters/ds2482.c index 6429b9e9fb82..e033491fe308 100644 --- a/drivers/w1/masters/ds2482.c +++ b/drivers/w1/masters/ds2482.c @@ -51,10 +51,10 @@ * The top 4 bits always read 0. * To write, the top nibble must be the 1's compl. of the low nibble. */ -#define DS2482_REG_CFG_1WS 0x08 -#define DS2482_REG_CFG_SPU 0x04 -#define DS2482_REG_CFG_PPM 0x02 -#define DS2482_REG_CFG_APU 0x01 +#define DS2482_REG_CFG_1WS 0x08 /* 1-wire speed */ +#define DS2482_REG_CFG_SPU 0x04 /* strong pull-up */ +#define DS2482_REG_CFG_PPM 0x02 /* presence pulse masking */ +#define DS2482_REG_CFG_APU 0x01 /* active pull-up */ /** @@ -132,6 +132,17 @@ struct ds2482_data { /** + * Helper to calculate values for configuration register + * @param conf the raw config value + * @return the value w/ complements that can be written to register + */ +static inline u8 ds2482_calculate_config(u8 conf) +{ + return conf | ((~conf & 0x0f) << 4); +} + + +/** * Sets the read pointer. * @param pdev The ds2482 client pointer * @param read_ptr see DS2482_PTR_CODE_xxx above @@ -399,7 +410,7 @@ static u8 ds2482_w1_reset_bus(void *data) /* If the chip did reset since detect, re-config it */ if (err & DS2482_REG_STS_RST) ds2482_send_cmd_data(pdev, DS2482_CMD_WRITE_CONFIG, - 0xF0); + ds2482_calculate_config(0x00)); } mutex_unlock(&pdev->access_lock); @@ -407,6 +418,32 @@ static u8 ds2482_w1_reset_bus(void *data) return retval; } +static u8 ds2482_w1_set_pullup(void *data, int delay) +{ + struct ds2482_w1_chan *pchan = data; + struct ds2482_data *pdev = pchan->pdev; + u8 retval = 1; + + /* if delay is non-zero activate the pullup, + * the strong pullup will be automatically deactivated + * by the master, so do not explicitly deactive it + */ + if (delay) { + /* both waits are crucial, otherwise devices might not be + * powered long enough, causing e.g. a w1_therm sensor to + * provide wrong conversion results + */ + ds2482_wait_1wire_idle(pdev); + /* note: it seems like both SPU and APU have to be set! */ + retval = ds2482_send_cmd_data(pdev, DS2482_CMD_WRITE_CONFIG, + ds2482_calculate_config(DS2482_REG_CFG_SPU | + DS2482_REG_CFG_APU)); + ds2482_wait_1wire_idle(pdev); + } + + return retval; +} + static int ds2482_probe(struct i2c_client *client, const struct i2c_device_id *id) @@ -452,7 +489,8 @@ static int ds2482_probe(struct i2c_client *client, data->w1_count = 8; /* Set all config items to 0 (off) */ - ds2482_send_cmd_data(data, DS2482_CMD_WRITE_CONFIG, 0xF0); + ds2482_send_cmd_data(data, DS2482_CMD_WRITE_CONFIG, + ds2482_calculate_config(0x00)); mutex_init(&data->access_lock); @@ -468,6 +506,7 @@ static int ds2482_probe(struct i2c_client *client, data->w1_ch[idx].w1_bm.touch_bit = ds2482_w1_touch_bit; data->w1_ch[idx].w1_bm.triplet = ds2482_w1_triplet; data->w1_ch[idx].w1_bm.reset_bus = ds2482_w1_reset_bus; + data->w1_ch[idx].w1_bm.set_pullup = ds2482_w1_set_pullup; err = w1_add_master_device(&data->w1_ch[idx].w1_bm); if (err) { diff --git a/drivers/w1/masters/mxc_w1.c b/drivers/w1/masters/mxc_w1.c index 708a25fc9961..372c8c0d54a0 100644 --- a/drivers/w1/masters/mxc_w1.c +++ b/drivers/w1/masters/mxc_w1.c @@ -109,34 +109,21 @@ static int mxc_w1_probe(struct platform_device *pdev) struct resource *res; int err = 0; - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) - return -ENODEV; - - mdev = kzalloc(sizeof(struct mxc_w1_device), GFP_KERNEL); + mdev = devm_kzalloc(&pdev->dev, sizeof(struct mxc_w1_device), + GFP_KERNEL); if (!mdev) return -ENOMEM; - mdev->clk = clk_get(&pdev->dev, NULL); - if (IS_ERR(mdev->clk)) { - err = PTR_ERR(mdev->clk); - goto failed_clk; - } + mdev->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(mdev->clk)) + return PTR_ERR(mdev->clk); mdev->clkdiv = (clk_get_rate(mdev->clk) / 1000000) - 1; - res = request_mem_region(res->start, resource_size(res), - "mxc_w1"); - if (!res) { - err = -EBUSY; - goto failed_req; - } - - mdev->regs = ioremap(res->start, resource_size(res)); - if (!mdev->regs) { - dev_err(&pdev->dev, "Cannot map mxc_w1 registers\n"); - goto failed_ioremap; - } + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + mdev->regs = devm_request_and_ioremap(&pdev->dev, res); + if (!mdev->regs) + return -EBUSY; clk_prepare_enable(mdev->clk); __raw_writeb(mdev->clkdiv, mdev->regs + MXC_W1_TIME_DIVIDER); @@ -148,20 +135,10 @@ static int mxc_w1_probe(struct platform_device *pdev) err = w1_add_master_device(&mdev->bus_master); if (err) - goto failed_add; + return err; platform_set_drvdata(pdev, mdev); return 0; - -failed_add: - iounmap(mdev->regs); -failed_ioremap: - release_mem_region(res->start, resource_size(res)); -failed_req: - clk_put(mdev->clk); -failed_clk: - kfree(mdev); - return err; } /* @@ -170,16 +147,10 @@ failed_clk: static int mxc_w1_remove(struct platform_device *pdev) { struct mxc_w1_device *mdev = platform_get_drvdata(pdev); - struct resource *res; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); w1_remove_master_device(&mdev->bus_master); - iounmap(mdev->regs); - release_mem_region(res->start, resource_size(res)); clk_disable_unprepare(mdev->clk); - clk_put(mdev->clk); platform_set_drvdata(pdev, NULL); diff --git a/drivers/w1/masters/w1-gpio.c b/drivers/w1/masters/w1-gpio.c index 85b363a5bd0f..d39dfa4cc235 100644 --- a/drivers/w1/masters/w1-gpio.c +++ b/drivers/w1/masters/w1-gpio.c @@ -72,7 +72,7 @@ static int w1_gpio_probe_dt(struct platform_device *pdev) return 0; } -static int __init w1_gpio_probe(struct platform_device *pdev) +static int w1_gpio_probe(struct platform_device *pdev) { struct w1_bus_master *master; struct w1_gpio_platform_data *pdata; diff --git a/drivers/w1/slaves/w1_therm.c b/drivers/w1/slaves/w1_therm.c index 92d08e7fcba2..c1a702f8c803 100644 --- a/drivers/w1/slaves/w1_therm.c +++ b/drivers/w1/slaves/w1_therm.c @@ -41,14 +41,18 @@ MODULE_DESCRIPTION("Driver for 1-wire Dallas network protocol, temperature famil * If it was disabled a parasite powered device might not get the require * current to do a temperature conversion. If it is enabled parasite powered * devices have a better chance of getting the current required. + * In case the parasite power-detection is not working (seems to be the case + * for some DS18S20) the strong pullup can also be forced, regardless of the + * power state of the devices. + * + * Summary of options: + * - strong_pullup = 0 Disable strong pullup completely + * - strong_pullup = 1 Enable automatic strong pullup detection + * - strong_pullup = 2 Force strong pullup */ static int w1_strong_pullup = 1; module_param_named(strong_pullup, w1_strong_pullup, int, 0); -static u8 bad_roms[][9] = { - {0xaa, 0x00, 0x4b, 0x46, 0xff, 0xff, 0x0c, 0x10, 0x87}, - {} - }; static ssize_t w1_therm_read(struct device *device, struct device_attribute *attr, char *buf); @@ -168,16 +172,6 @@ static inline int w1_convert_temp(u8 rom[9], u8 fid) return 0; } -static int w1_therm_check_rom(u8 rom[9]) -{ - int i; - - for (i=0; i<sizeof(bad_roms)/9; ++i) - if (!memcmp(bad_roms[i], rom, 9)) - return 1; - - return 0; -} static ssize_t w1_therm_read(struct device *device, struct device_attribute *attr, char *buf) @@ -194,10 +188,11 @@ static ssize_t w1_therm_read(struct device *device, memset(rom, 0, sizeof(rom)); - verdict = 0; - crc = 0; - while (max_trying--) { + + verdict = 0; + crc = 0; + if (!w1_reset_select_slave(sl)) { int count = 0; unsigned int tm = 750; @@ -210,7 +205,8 @@ static ssize_t w1_therm_read(struct device *device, continue; /* 750ms strong pullup (or delay) after the convert */ - if (!external_power && w1_strong_pullup) + if (w1_strong_pullup == 2 || + (!external_power && w1_strong_pullup)) w1_next_pullup(dev, tm); w1_write_8(dev, W1_CONVERT_TEMP); @@ -249,7 +245,7 @@ static ssize_t w1_therm_read(struct device *device, } } - if (!w1_therm_check_rom(rom)) + if (verdict) break; } @@ -260,7 +256,7 @@ static ssize_t w1_therm_read(struct device *device, if (verdict) memcpy(sl->rom, rom, sizeof(sl->rom)); else - dev_warn(device, "18S20 doesn't respond to CONVERT_TEMP.\n"); + dev_warn(device, "Read failed CRC check\n"); for (i = 0; i < 9; ++i) c -= snprintf(buf + PAGE_SIZE - c, c, "%02x ", sl->rom[i]); diff --git a/include/linux/extcon/extcon_gpio.h b/include/linux/extcon/extcon-gpio.h index 2d8307f7d67d..2d8307f7d67d 100644 --- a/include/linux/extcon/extcon_gpio.h +++ b/include/linux/extcon/extcon-gpio.h diff --git a/include/linux/hyperv.h b/include/linux/hyperv.h index e73b852156b1..df77ba9a8166 100644 --- a/include/linux/hyperv.h +++ b/include/linux/hyperv.h @@ -325,14 +325,28 @@ struct hv_ring_buffer { u32 interrupt_mask; - /* Pad it to PAGE_SIZE so that data starts on page boundary */ - u8 reserved[4084]; - - /* NOTE: - * The interrupt_mask field is used only for channels but since our - * vmbus connection also uses this data structure and its data starts - * here, we commented out this field. + /* + * Win8 uses some of the reserved bits to implement + * interrupt driven flow management. On the send side + * we can request that the receiver interrupt the sender + * when the ring transitions from being full to being able + * to handle a message of size "pending_send_sz". + * + * Add necessary state for this enhancement. */ + u32 pending_send_sz; + + u32 reserved1[12]; + + union { + struct { + u32 feat_pending_send_sz:1; + }; + u32 value; + } feature_bits; + + /* Pad it to PAGE_SIZE so that data starts on page boundary */ + u8 reserved2[4028]; /* * Ring data starts here + RingDataStartOffset @@ -405,12 +419,22 @@ hv_get_ringbuffer_availbytes(struct hv_ring_buffer_info *rbi, */ #define HV_DRV_VERSION "3.1" - /* - * A revision number of vmbus that is used for ensuring both ends on a - * partition are using compatible versions. + * VMBUS version is 32 bit entity broken up into + * two 16 bit quantities: major_number. minor_number. + * + * 0 . 13 (Windows Server 2008) + * 1 . 1 (Windows 7) + * 2 . 4 (Windows 8) */ -#define VMBUS_REVISION_NUMBER 13 + +#define VERSION_WS2008 ((0 << 16) | (13)) +#define VERSION_WIN7 ((1 << 16) | (1)) +#define VERSION_WIN8 ((2 << 16) | (4)) + +#define VERSION_INVAL -1 + +#define VERSION_CURRENT VERSION_WIN8 /* Make maximum size of pipe payload of 16K */ #define MAX_PIPE_DATA_PAYLOAD (sizeof(u8) * 16384) @@ -432,9 +456,13 @@ hv_get_ringbuffer_availbytes(struct hv_ring_buffer_info *rbi, struct vmbus_channel_offer { uuid_le if_type; uuid_le if_instance; - u64 int_latency; /* in 100ns units */ - u32 if_revision; - u32 server_ctx_size; /* in bytes */ + + /* + * These two fields are not currently used. + */ + u64 reserved1; + u64 reserved2; + u16 chn_flags; u16 mmio_megabytes; /* in bytes * 1024 * 1024 */ @@ -456,7 +484,11 @@ struct vmbus_channel_offer { unsigned char user_def[MAX_PIPE_USER_DEFINED_BYTES]; } pipe; } u; - u32 padding; + /* + * The sub_channel_index is defined in win8. + */ + u16 sub_channel_index; + u16 reserved3; } __packed; /* Server Flags */ @@ -652,7 +684,25 @@ struct vmbus_channel_offer_channel { struct vmbus_channel_offer offer; u32 child_relid; u8 monitorid; - u8 monitor_allocated; + /* + * win7 and beyond splits this field into a bit field. + */ + u8 monitor_allocated:1; + u8 reserved:7; + /* + * These are new fields added in win7 and later. + * Do not access these fields without checking the + * negotiated protocol. + * + * If "is_dedicated_interrupt" is set, we must not set the + * associated bit in the channel bitmap while sending the + * interrupt to the host. + * + * connection_id is to be used in signaling the host. + */ + u16 is_dedicated_interrupt:1; + u16 reserved1:15; + u32 connection_id; } __packed; /* Rescind Offer parameters */ @@ -683,8 +733,15 @@ struct vmbus_channel_open_channel { /* GPADL for the channel's ring buffer. */ u32 ringbuffer_gpadlhandle; - /* GPADL for the channel's server context save area. */ - u32 server_contextarea_gpadlhandle; + /* + * Starting with win8, this field will be used to specify + * the target virtual processor on which to deliver the interrupt for + * the host to guest communication. + * Prior to win8, incoming channel interrupts would only + * be delivered on cpu 0. Setting this value to 0 would + * preserve the earlier behavior. + */ + u32 target_vp; /* * The upstream ring buffer begins at offset zero in the memory @@ -848,6 +905,27 @@ struct vmbus_close_msg { struct vmbus_channel_close_channel msg; }; +/* Define connection identifier type. */ +union hv_connection_id { + u32 asu32; + struct { + u32 id:24; + u32 reserved:8; + } u; +}; + +/* Definition of the hv_signal_event hypercall input structure. */ +struct hv_input_signal_event { + union hv_connection_id connectionid; + u16 flag_number; + u16 rsvdz; +}; + +struct hv_input_signal_event_buffer { + u64 align8; + struct hv_input_signal_event event; +}; + struct vmbus_channel { struct list_head listentry; @@ -882,8 +960,42 @@ struct vmbus_channel { void (*onchannel_callback)(void *context); void *channel_callback_context; + + /* + * A channel can be marked for efficient (batched) + * reading: + * If batched_reading is set to "true", we read until the + * channel is empty and hold off interrupts from the host + * during the entire read process. + * If batched_reading is set to "false", the client is not + * going to perform batched reading. + * + * By default we will enable batched reading; specific + * drivers that don't want this behavior can turn it off. + */ + + bool batched_reading; + + bool is_dedicated_interrupt; + struct hv_input_signal_event_buffer sig_buf; + struct hv_input_signal_event *sig_event; + + /* + * Starting with win8, this field will be used to specify + * the target virtual processor on which to deliver the interrupt for + * the host to guest communication. + * Prior to win8, incoming channel interrupts would only + * be delivered on cpu 0. Setting this value to 0 would + * preserve the earlier behavior. + */ + u32 target_vp; }; +static inline void set_channel_read_state(struct vmbus_channel *c, bool state) +{ + c->batched_reading = state; +} + void vmbus_onmessage(void *context); int vmbus_request_offers(void); @@ -1047,6 +1159,100 @@ void vmbus_driver_unregister(struct hv_driver *hv_driver); g8, g9, ga, gb, gc, gd, ge, gf }, /* + * GUID definitions of various offer types - services offered to the guest. + */ + +/* + * Network GUID + * {f8615163-df3e-46c5-913f-f2d2f965ed0e} + */ +#define HV_NIC_GUID \ + .guid = { \ + 0x63, 0x51, 0x61, 0xf8, 0x3e, 0xdf, 0xc5, 0x46, \ + 0x91, 0x3f, 0xf2, 0xd2, 0xf9, 0x65, 0xed, 0x0e \ + } + +/* + * IDE GUID + * {32412632-86cb-44a2-9b5c-50d1417354f5} + */ +#define HV_IDE_GUID \ + .guid = { \ + 0x32, 0x26, 0x41, 0x32, 0xcb, 0x86, 0xa2, 0x44, \ + 0x9b, 0x5c, 0x50, 0xd1, 0x41, 0x73, 0x54, 0xf5 \ + } + +/* + * SCSI GUID + * {ba6163d9-04a1-4d29-b605-72e2ffb1dc7f} + */ +#define HV_SCSI_GUID \ + .guid = { \ + 0xd9, 0x63, 0x61, 0xba, 0xa1, 0x04, 0x29, 0x4d, \ + 0xb6, 0x05, 0x72, 0xe2, 0xff, 0xb1, 0xdc, 0x7f \ + } + +/* + * Shutdown GUID + * {0e0b6031-5213-4934-818b-38d90ced39db} + */ +#define HV_SHUTDOWN_GUID \ + .guid = { \ + 0x31, 0x60, 0x0b, 0x0e, 0x13, 0x52, 0x34, 0x49, \ + 0x81, 0x8b, 0x38, 0xd9, 0x0c, 0xed, 0x39, 0xdb \ + } + +/* + * Time Synch GUID + * {9527E630-D0AE-497b-ADCE-E80AB0175CAF} + */ +#define HV_TS_GUID \ + .guid = { \ + 0x30, 0xe6, 0x27, 0x95, 0xae, 0xd0, 0x7b, 0x49, \ + 0xad, 0xce, 0xe8, 0x0a, 0xb0, 0x17, 0x5c, 0xaf \ + } + +/* + * Heartbeat GUID + * {57164f39-9115-4e78-ab55-382f3bd5422d} + */ +#define HV_HEART_BEAT_GUID \ + .guid = { \ + 0x39, 0x4f, 0x16, 0x57, 0x15, 0x91, 0x78, 0x4e, \ + 0xab, 0x55, 0x38, 0x2f, 0x3b, 0xd5, 0x42, 0x2d \ + } + +/* + * KVP GUID + * {a9a0f4e7-5a45-4d96-b827-8a841e8c03e6} + */ +#define HV_KVP_GUID \ + .guid = { \ + 0xe7, 0xf4, 0xa0, 0xa9, 0x45, 0x5a, 0x96, 0x4d, \ + 0xb8, 0x27, 0x8a, 0x84, 0x1e, 0x8c, 0x3, 0xe6 \ + } + +/* + * Dynamic memory GUID + * {525074dc-8985-46e2-8057-a307dc18a502} + */ +#define HV_DM_GUID \ + .guid = { \ + 0xdc, 0x74, 0x50, 0X52, 0x85, 0x89, 0xe2, 0x46, \ + 0x80, 0x57, 0xa3, 0x07, 0xdc, 0x18, 0xa5, 0x02 \ + } + +/* + * Mouse GUID + * {cfa8b69e-5b4a-4cc0-b98b-8ba1a1f3f95a} + */ +#define HV_MOUSE_GUID \ + .guid = { \ + 0x9e, 0xb6, 0xa8, 0xcf, 0x4a, 0x5b, 0xc0, 0x4c, \ + 0xb9, 0x8b, 0x8b, 0xa1, 0xa1, 0xf3, 0xf9, 0x5a \ + } + +/* * Common header for Hyper-V ICs */ @@ -1150,5 +1356,11 @@ int hv_kvp_init(struct hv_util_service *); void hv_kvp_deinit(void); void hv_kvp_onchannelcallback(void *); +/* + * Negotiated version with the Host. + */ + +extern __u32 vmbus_proto_version; + #endif /* __KERNEL__ */ #endif /* _HYPERV_H */ diff --git a/include/linux/mfd/arizona/core.h b/include/linux/mfd/arizona/core.h index a580363a7d29..a710255528d7 100644 --- a/include/linux/mfd/arizona/core.h +++ b/include/linux/mfd/arizona/core.h @@ -75,8 +75,10 @@ enum arizona_type { #define ARIZONA_IRQ_DCS_HP_DONE 47 #define ARIZONA_IRQ_FLL2_CLOCK_OK 48 #define ARIZONA_IRQ_FLL1_CLOCK_OK 49 +#define ARIZONA_IRQ_MICD_CLAMP_RISE 50 +#define ARIZONA_IRQ_MICD_CLAMP_FALL 51 -#define ARIZONA_NUM_IRQ 50 +#define ARIZONA_NUM_IRQ 52 struct snd_soc_dapm_context; diff --git a/include/linux/mfd/arizona/pdata.h b/include/linux/mfd/arizona/pdata.h index ec3e2a2a6d77..96d64f2b8d78 100644 --- a/include/linux/mfd/arizona/pdata.h +++ b/include/linux/mfd/arizona/pdata.h @@ -105,9 +105,30 @@ struct arizona_pdata { */ int max_channels_clocked[ARIZONA_MAX_AIF]; + /** GPIO5 is used for jack detection */ + bool jd_gpio5; + + /** Use the headphone detect circuit to identify the accessory */ + bool hpdet_acc_id; + + /** GPIO used for mic isolation with HPDET */ + int hpdet_id_gpio; + /** GPIO for mic detection polarity */ int micd_pol_gpio; + /** Mic detect ramp rate */ + int micd_bias_start_time; + + /** Mic detect sample rate */ + int micd_rate; + + /** Mic detect debounce level */ + int micd_dbtime; + + /** Force MICBIAS on for mic detect */ + bool micd_force_micbias; + /** Headset polarity configurations */ struct arizona_micd_config *micd_configs; int num_micd_configs; diff --git a/include/linux/mfd/arizona/registers.h b/include/linux/mfd/arizona/registers.h index 1f6fe31a4d5c..188d89abd963 100644 --- a/include/linux/mfd/arizona/registers.h +++ b/include/linux/mfd/arizona/registers.h @@ -119,6 +119,8 @@ #define ARIZONA_ACCESSORY_DETECT_MODE_1 0x293 #define ARIZONA_HEADPHONE_DETECT_1 0x29B #define ARIZONA_HEADPHONE_DETECT_2 0x29C +#define ARIZONA_HP_DACVAL 0x29F +#define ARIZONA_MICD_CLAMP_CONTROL 0x2A2 #define ARIZONA_MIC_DETECT_1 0x2A3 #define ARIZONA_MIC_DETECT_2 0x2A4 #define ARIZONA_MIC_DETECT_3 0x2A5 @@ -1194,6 +1196,14 @@ /* * R64 (0x40) - Wake control */ +#define ARIZONA_WKUP_MICD_CLAMP_FALL 0x0080 /* WKUP_MICD_CLAMP_FALL */ +#define ARIZONA_WKUP_MICD_CLAMP_FALL_MASK 0x0080 /* WKUP_MICD_CLAMP_FALL */ +#define ARIZONA_WKUP_MICD_CLAMP_FALL_SHIFT 7 /* WKUP_MICD_CLAMP_FALL */ +#define ARIZONA_WKUP_MICD_CLAMP_FALL_WIDTH 1 /* WKUP_MICD_CLAMP_FALL */ +#define ARIZONA_WKUP_MICD_CLAMP_RISE 0x0040 /* WKUP_MICD_CLAMP_RISE */ +#define ARIZONA_WKUP_MICD_CLAMP_RISE_MASK 0x0040 /* WKUP_MICD_CLAMP_RISE */ +#define ARIZONA_WKUP_MICD_CLAMP_RISE_SHIFT 6 /* WKUP_MICD_CLAMP_RISE */ +#define ARIZONA_WKUP_MICD_CLAMP_RISE_WIDTH 1 /* WKUP_MICD_CLAMP_RISE */ #define ARIZONA_WKUP_GP5_FALL 0x0020 /* WKUP_GP5_FALL */ #define ARIZONA_WKUP_GP5_FALL_MASK 0x0020 /* WKUP_GP5_FALL */ #define ARIZONA_WKUP_GP5_FALL_SHIFT 5 /* WKUP_GP5_FALL */ @@ -2035,6 +2045,9 @@ /* * R667 (0x29B) - Headphone Detect 1 */ +#define ARIZONA_HP_IMPEDANCE_RANGE_MASK 0x0600 /* HP_IMPEDANCE_RANGE - [10:9] */ +#define ARIZONA_HP_IMPEDANCE_RANGE_SHIFT 9 /* HP_IMPEDANCE_RANGE - [10:9] */ +#define ARIZONA_HP_IMPEDANCE_RANGE_WIDTH 2 /* HP_IMPEDANCE_RANGE - [10:9] */ #define ARIZONA_HP_STEP_SIZE 0x0100 /* HP_STEP_SIZE */ #define ARIZONA_HP_STEP_SIZE_MASK 0x0100 /* HP_STEP_SIZE */ #define ARIZONA_HP_STEP_SIZE_SHIFT 8 /* HP_STEP_SIZE */ @@ -2069,6 +2082,21 @@ #define ARIZONA_HP_LVL_SHIFT 0 /* HP_LVL - [6:0] */ #define ARIZONA_HP_LVL_WIDTH 7 /* HP_LVL - [6:0] */ +#define ARIZONA_HP_DONE_B 0x8000 /* HP_DONE */ +#define ARIZONA_HP_DONE_B_MASK 0x8000 /* HP_DONE */ +#define ARIZONA_HP_DONE_B_SHIFT 15 /* HP_DONE */ +#define ARIZONA_HP_DONE_B_WIDTH 1 /* HP_DONE */ +#define ARIZONA_HP_LVL_B_MASK 0x7FFF /* HP_LVL - [14:0] */ +#define ARIZONA_HP_LVL_B_SHIFT 0 /* HP_LVL - [14:0] */ +#define ARIZONA_HP_LVL_B_WIDTH 15 /* HP_LVL - [14:0] */ + +/* + * R674 (0x2A2) - MICD clamp control + */ +#define ARIZONA_MICD_CLAMP_MODE_MASK 0x000F /* MICD_CLAMP_MODE - [3:0] */ +#define ARIZONA_MICD_CLAMP_MODE_SHIFT 0 /* MICD_CLAMP_MODE - [3:0] */ +#define ARIZONA_MICD_CLAMP_MODE_WIDTH 4 /* MICD_CLAMP_MODE - [3:0] */ + /* * R675 (0x2A3) - Mic Detect 1 */ @@ -5239,6 +5267,14 @@ /* * R3408 (0xD50) - AOD wkup and trig */ +#define ARIZONA_MICD_CLAMP_FALL_TRIG_STS 0x0080 /* MICD_CLAMP_FALL_TRIG_STS */ +#define ARIZONA_MICD_CLAMP_FALL_TRIG_STS_MASK 0x0080 /* MICD_CLAMP_FALL_TRIG_STS */ +#define ARIZONA_MICD_CLAMP_FALL_TRIG_STS_SHIFT 7 /* MICD_CLAMP_FALL_TRIG_STS */ +#define ARIZONA_MICD_CLAMP_FALL_TRIG_STS_WIDTH 1 /* MICD_CLAMP_FALL_TRIG_STS */ +#define ARIZONA_MICD_CLAMP_RISE_TRIG_STS 0x0040 /* MICD_CLAMP_RISE_TRIG_STS */ +#define ARIZONA_MICD_CLAMP_RISE_TRIG_STS_MASK 0x0040 /* MICD_CLAMP_RISE_TRIG_STS */ +#define ARIZONA_MICD_CLAMP_RISE_TRIG_STS_SHIFT 6 /* MICD_CLAMP_RISE_TRIG_STS */ +#define ARIZONA_MICD_CLAMP_RISE_TRIG_STS_WIDTH 1 /* MICD_CLAMP_RISE_TRIG_STS */ #define ARIZONA_GP5_FALL_TRIG_STS 0x0020 /* GP5_FALL_TRIG_STS */ #define ARIZONA_GP5_FALL_TRIG_STS_MASK 0x0020 /* GP5_FALL_TRIG_STS */ #define ARIZONA_GP5_FALL_TRIG_STS_SHIFT 5 /* GP5_FALL_TRIG_STS */ @@ -5267,6 +5303,12 @@ /* * R3409 (0xD51) - AOD IRQ1 */ +#define ARIZONA_MICD_CLAMP_FALL_EINT1 0x0080 /* MICD_CLAMP_FALL_EINT1 */ +#define ARIZONA_MICD_CLAMP_FALL_EINT1_MASK 0x0080 /* MICD_CLAMP_FALL_EINT1 */ +#define ARIZONA_MICD_CLAMP_FALL_EINT1_SHIFT 7 /* MICD_CLAMP_FALL_EINT1 */ +#define ARIZONA_MICD_CLAMP_RISE_EINT1 0x0040 /* MICD_CLAMP_RISE_EINT1 */ +#define ARIZONA_MICD_CLAMP_RISE_EINT1_MASK 0x0040 /* MICD_CLAMP_RISE_EINT1 */ +#define ARIZONA_MICD_CLAMP_RISE_EINT1_SHIFT 6 /* MICD_CLAMP_RISE_EINT1 */ #define ARIZONA_GP5_FALL_EINT1 0x0020 /* GP5_FALL_EINT1 */ #define ARIZONA_GP5_FALL_EINT1_MASK 0x0020 /* GP5_FALL_EINT1 */ #define ARIZONA_GP5_FALL_EINT1_SHIFT 5 /* GP5_FALL_EINT1 */ @@ -5295,6 +5337,12 @@ /* * R3410 (0xD52) - AOD IRQ2 */ +#define ARIZONA_MICD_CLAMP_FALL_EINT2 0x0080 /* MICD_CLAMP_FALL_EINT2 */ +#define ARIZONA_MICD_CLAMP_FALL_EINT2_MASK 0x0080 /* MICD_CLAMP_FALL_EINT2 */ +#define ARIZONA_MICD_CLAMP_FALL_EINT2_SHIFT 7 /* MICD_CLAMP_FALL_EINT2 */ +#define ARIZONA_MICD_CLAMP_RISE_EINT2 0x0040 /* MICD_CLAMP_RISE_EINT2 */ +#define ARIZONA_MICD_CLAMP_RISE_EINT2_MASK 0x0040 /* MICD_CLAMP_RISE_EINT2 */ +#define ARIZONA_MICD_CLAMP_RISE_EINT2_SHIFT 6 /* MICD_CLAMP_RISE_EINT2 */ #define ARIZONA_GP5_FALL_EINT2 0x0020 /* GP5_FALL_EINT2 */ #define ARIZONA_GP5_FALL_EINT2_MASK 0x0020 /* GP5_FALL_EINT2 */ #define ARIZONA_GP5_FALL_EINT2_SHIFT 5 /* GP5_FALL_EINT2 */ @@ -5379,6 +5427,10 @@ /* * R3413 (0xD55) - AOD IRQ Raw Status */ +#define ARIZONA_MICD_CLAMP_STS 0x0008 /* MICD_CLAMP_STS */ +#define ARIZONA_MICD_CLAMP_STS_MASK 0x0008 /* MICD_CLAMP_STS */ +#define ARIZONA_MICD_CLAMP_STS_SHIFT 3 /* MICD_CLAMP_STS */ +#define ARIZONA_MICD_CLAMP_STS_WIDTH 1 /* MICD_CLAMP_STS */ #define ARIZONA_GP5_STS 0x0004 /* GP5_STS */ #define ARIZONA_GP5_STS_MASK 0x0004 /* GP5_STS */ #define ARIZONA_GP5_STS_SHIFT 2 /* GP5_STS */ @@ -5395,6 +5447,10 @@ /* * R3414 (0xD56) - Jack detect debounce */ +#define ARIZONA_MICD_CLAMP_DB 0x0008 /* MICD_CLAMP_DB */ +#define ARIZONA_MICD_CLAMP_DB_MASK 0x0008 /* MICD_CLAMP_DB */ +#define ARIZONA_MICD_CLAMP_DB_SHIFT 3 /* MICD_CLAMP_DB */ +#define ARIZONA_MICD_CLAMP_DB_WIDTH 1 /* MICD_CLAMP_DB */ #define ARIZONA_JD2_DB 0x0002 /* JD2_DB */ #define ARIZONA_JD2_DB_MASK 0x0002 /* JD2_DB */ #define ARIZONA_JD2_DB_SHIFT 1 /* JD2_DB */ diff --git a/include/linux/mfd/max77693-private.h b/include/linux/mfd/max77693-private.h index 1eeae5c07915..5b18ecde69b5 100644 --- a/include/linux/mfd/max77693-private.h +++ b/include/linux/mfd/max77693-private.h @@ -106,6 +106,92 @@ enum max77693_muic_reg { MAX77693_MUIC_REG_END, }; +/* MAX77693 MUIC - STATUS1~3 Register */ +#define STATUS1_ADC_SHIFT (0) +#define STATUS1_ADCLOW_SHIFT (5) +#define STATUS1_ADCERR_SHIFT (6) +#define STATUS1_ADC1K_SHIFT (7) +#define STATUS1_ADC_MASK (0x1f << STATUS1_ADC_SHIFT) +#define STATUS1_ADCLOW_MASK (0x1 << STATUS1_ADCLOW_SHIFT) +#define STATUS1_ADCERR_MASK (0x1 << STATUS1_ADCERR_SHIFT) +#define STATUS1_ADC1K_MASK (0x1 << STATUS1_ADC1K_SHIFT) + +#define STATUS2_CHGTYP_SHIFT (0) +#define STATUS2_CHGDETRUN_SHIFT (3) +#define STATUS2_DCDTMR_SHIFT (4) +#define STATUS2_DXOVP_SHIFT (5) +#define STATUS2_VBVOLT_SHIFT (6) +#define STATUS2_VIDRM_SHIFT (7) +#define STATUS2_CHGTYP_MASK (0x7 << STATUS2_CHGTYP_SHIFT) +#define STATUS2_CHGDETRUN_MASK (0x1 << STATUS2_CHGDETRUN_SHIFT) +#define STATUS2_DCDTMR_MASK (0x1 << STATUS2_DCDTMR_SHIFT) +#define STATUS2_DXOVP_MASK (0x1 << STATUS2_DXOVP_SHIFT) +#define STATUS2_VBVOLT_MASK (0x1 << STATUS2_VBVOLT_SHIFT) +#define STATUS2_VIDRM_MASK (0x1 << STATUS2_VIDRM_SHIFT) + +#define STATUS3_OVP_SHIFT (2) +#define STATUS3_OVP_MASK (0x1 << STATUS3_OVP_SHIFT) + +/* MAX77693 CDETCTRL1~2 register */ +#define CDETCTRL1_CHGDETEN_SHIFT (0) +#define CDETCTRL1_CHGTYPMAN_SHIFT (1) +#define CDETCTRL1_DCDEN_SHIFT (2) +#define CDETCTRL1_DCD2SCT_SHIFT (3) +#define CDETCTRL1_CDDELAY_SHIFT (4) +#define CDETCTRL1_DCDCPL_SHIFT (5) +#define CDETCTRL1_CDPDET_SHIFT (7) +#define CDETCTRL1_CHGDETEN_MASK (0x1 << CDETCTRL1_CHGDETEN_SHIFT) +#define CDETCTRL1_CHGTYPMAN_MASK (0x1 << CDETCTRL1_CHGTYPMAN_SHIFT) +#define CDETCTRL1_DCDEN_MASK (0x1 << CDETCTRL1_DCDEN_SHIFT) +#define CDETCTRL1_DCD2SCT_MASK (0x1 << CDETCTRL1_DCD2SCT_SHIFT) +#define CDETCTRL1_CDDELAY_MASK (0x1 << CDETCTRL1_CDDELAY_SHIFT) +#define CDETCTRL1_DCDCPL_MASK (0x1 << CDETCTRL1_DCDCPL_SHIFT) +#define CDETCTRL1_CDPDET_MASK (0x1 << CDETCTRL1_CDPDET_SHIFT) + +#define CDETCTRL2_VIDRMEN_SHIFT (1) +#define CDETCTRL2_DXOVPEN_SHIFT (3) +#define CDETCTRL2_VIDRMEN_MASK (0x1 << CDETCTRL2_VIDRMEN_SHIFT) +#define CDETCTRL2_DXOVPEN_MASK (0x1 << CDETCTRL2_DXOVPEN_SHIFT) + +/* MAX77693 MUIC - CONTROL1~3 register */ +#define COMN1SW_SHIFT (0) +#define COMP2SW_SHIFT (3) +#define COMN1SW_MASK (0x7 << COMN1SW_SHIFT) +#define COMP2SW_MASK (0x7 << COMP2SW_SHIFT) +#define COMP_SW_MASK (COMP2SW_MASK | COMN1SW_MASK) +#define CONTROL1_SW_USB ((1 << COMP2SW_SHIFT) \ + | (1 << COMN1SW_SHIFT)) +#define CONTROL1_SW_AUDIO ((2 << COMP2SW_SHIFT) \ + | (2 << COMN1SW_SHIFT)) +#define CONTROL1_SW_UART ((3 << COMP2SW_SHIFT) \ + | (3 << COMN1SW_SHIFT)) +#define CONTROL1_SW_OPEN ((0 << COMP2SW_SHIFT) \ + | (0 << COMN1SW_SHIFT)) + +#define CONTROL2_LOWPWR_SHIFT (0) +#define CONTROL2_ADCEN_SHIFT (1) +#define CONTROL2_CPEN_SHIFT (2) +#define CONTROL2_SFOUTASRT_SHIFT (3) +#define CONTROL2_SFOUTORD_SHIFT (4) +#define CONTROL2_ACCDET_SHIFT (5) +#define CONTROL2_USBCPINT_SHIFT (6) +#define CONTROL2_RCPS_SHIFT (7) +#define CONTROL2_LOWPWR_MASK (0x1 << CONTROL2_LOWPWR_SHIFT) +#define CONTROL2_ADCEN_MASK (0x1 << CONTROL2_ADCEN_SHIFT) +#define CONTROL2_CPEN_MASK (0x1 << CONTROL2_CPEN_SHIFT) +#define CONTROL2_SFOUTASRT_MASK (0x1 << CONTROL2_SFOUTASRT_SHIFT) +#define CONTROL2_SFOUTORD_MASK (0x1 << CONTROL2_SFOUTORD_SHIFT) +#define CONTROL2_ACCDET_MASK (0x1 << CONTROL2_ACCDET_SHIFT) +#define CONTROL2_USBCPINT_MASK (0x1 << CONTROL2_USBCPINT_SHIFT) +#define CONTROL2_RCPS_MASK (0x1 << CONTROL2_RCPS_SHIFT) + +#define CONTROL3_JIGSET_SHIFT (0) +#define CONTROL3_BTLDSET_SHIFT (2) +#define CONTROL3_ADCDBSET_SHIFT (4) +#define CONTROL3_JIGSET_MASK (0x3 << CONTROL3_JIGSET_SHIFT) +#define CONTROL3_BTLDSET_MASK (0x3 << CONTROL3_BTLDSET_SHIFT) +#define CONTROL3_ADCDBSET_MASK (0x3 << CONTROL3_ADCDBSET_SHIFT) + /* Slave addr = 0x90: Haptic */ enum max77693_haptic_reg { MAX77693_HAPTIC_REG_STATUS = 0x00, diff --git a/include/linux/mfd/max77693.h b/include/linux/mfd/max77693.h index fe03b2d35d4f..3109a6c5c948 100644 --- a/include/linux/mfd/max77693.h +++ b/include/linux/mfd/max77693.h @@ -38,6 +38,15 @@ struct max77693_reg_data { struct max77693_muic_platform_data { struct max77693_reg_data *init_data; int num_init_data; + + int detcable_delay_ms; + + /* + * Default usb/uart path whether UART/USB or AUX_UART/AUX_USB + * h/w path of COMP2/COMN1 on CONTROL1 register. + */ + int path_usb; + int path_uart; }; struct max77693_platform_data { diff --git a/include/linux/mfd/max8997-private.h b/include/linux/mfd/max8997-private.h index 6ae21bf47d64..fb465dfbb59e 100644 --- a/include/linux/mfd/max8997-private.h +++ b/include/linux/mfd/max8997-private.h @@ -194,6 +194,70 @@ enum max8997_muic_reg { MAX8997_MUIC_REG_END = 0xf, }; +/* MAX8997-MUIC STATUS1 register */ +#define STATUS1_ADC_SHIFT 0 +#define STATUS1_ADCLOW_SHIFT 5 +#define STATUS1_ADCERR_SHIFT 6 +#define STATUS1_ADC_MASK (0x1f << STATUS1_ADC_SHIFT) +#define STATUS1_ADCLOW_MASK (0x1 << STATUS1_ADCLOW_SHIFT) +#define STATUS1_ADCERR_MASK (0x1 << STATUS1_ADCERR_SHIFT) + +/* MAX8997-MUIC STATUS2 register */ +#define STATUS2_CHGTYP_SHIFT 0 +#define STATUS2_CHGDETRUN_SHIFT 3 +#define STATUS2_DCDTMR_SHIFT 4 +#define STATUS2_DBCHG_SHIFT 5 +#define STATUS2_VBVOLT_SHIFT 6 +#define STATUS2_CHGTYP_MASK (0x7 << STATUS2_CHGTYP_SHIFT) +#define STATUS2_CHGDETRUN_MASK (0x1 << STATUS2_CHGDETRUN_SHIFT) +#define STATUS2_DCDTMR_MASK (0x1 << STATUS2_DCDTMR_SHIFT) +#define STATUS2_DBCHG_MASK (0x1 << STATUS2_DBCHG_SHIFT) +#define STATUS2_VBVOLT_MASK (0x1 << STATUS2_VBVOLT_SHIFT) + +/* MAX8997-MUIC STATUS3 register */ +#define STATUS3_OVP_SHIFT 2 +#define STATUS3_OVP_MASK (0x1 << STATUS3_OVP_SHIFT) + +/* MAX8997-MUIC CONTROL1 register */ +#define COMN1SW_SHIFT 0 +#define COMP2SW_SHIFT 3 +#define COMN1SW_MASK (0x7 << COMN1SW_SHIFT) +#define COMP2SW_MASK (0x7 << COMP2SW_SHIFT) +#define COMP_SW_MASK (COMP2SW_MASK | COMN1SW_MASK) + +#define CONTROL1_SW_USB ((1 << COMP2SW_SHIFT) \ + | (1 << COMN1SW_SHIFT)) +#define CONTROL1_SW_AUDIO ((2 << COMP2SW_SHIFT) \ + | (2 << COMN1SW_SHIFT)) +#define CONTROL1_SW_UART ((3 << COMP2SW_SHIFT) \ + | (3 << COMN1SW_SHIFT)) +#define CONTROL1_SW_OPEN ((0 << COMP2SW_SHIFT) \ + | (0 << COMN1SW_SHIFT)) + +#define CONTROL2_LOWPWR_SHIFT (0) +#define CONTROL2_ADCEN_SHIFT (1) +#define CONTROL2_CPEN_SHIFT (2) +#define CONTROL2_SFOUTASRT_SHIFT (3) +#define CONTROL2_SFOUTORD_SHIFT (4) +#define CONTROL2_ACCDET_SHIFT (5) +#define CONTROL2_USBCPINT_SHIFT (6) +#define CONTROL2_RCPS_SHIFT (7) +#define CONTROL2_LOWPWR_MASK (0x1 << CONTROL2_LOWPWR_SHIFT) +#define CONTROL2_ADCEN_MASK (0x1 << CONTROL2_ADCEN_SHIFT) +#define CONTROL2_CPEN_MASK (0x1 << CONTROL2_CPEN_SHIFT) +#define CONTROL2_SFOUTASRT_MASK (0x1 << CONTROL2_SFOUTASRT_SHIFT) +#define CONTROL2_SFOUTORD_MASK (0x1 << CONTROL2_SFOUTORD_SHIFT) +#define CONTROL2_ACCDET_MASK (0x1 << CONTROL2_ACCDET_SHIFT) +#define CONTROL2_USBCPINT_MASK (0x1 << CONTROL2_USBCPINT_SHIFT) +#define CONTROL2_RCPS_MASK (0x1 << CONTROL2_RCPS_SHIFT) + +#define CONTROL3_JIGSET_SHIFT (0) +#define CONTROL3_BTLDSET_SHIFT (2) +#define CONTROL3_ADCDBSET_SHIFT (4) +#define CONTROL3_JIGSET_MASK (0x3 << CONTROL3_JIGSET_SHIFT) +#define CONTROL3_BTLDSET_MASK (0x3 << CONTROL3_BTLDSET_SHIFT) +#define CONTROL3_ADCDBSET_MASK (0x3 << CONTROL3_ADCDBSET_SHIFT) + enum max8997_haptic_reg { MAX8997_HAPTIC_REG_GENERAL = 0x00, MAX8997_HAPTIC_REG_CONF1 = 0x01, diff --git a/include/linux/mfd/max8997.h b/include/linux/mfd/max8997.h index 1d4a4fe6ac33..cf815577bd68 100644 --- a/include/linux/mfd/max8997.h +++ b/include/linux/mfd/max8997.h @@ -78,21 +78,6 @@ struct max8997_regulator_data { struct device_node *reg_node; }; -enum max8997_muic_usb_type { - MAX8997_USB_HOST, - MAX8997_USB_DEVICE, -}; - -enum max8997_muic_charger_type { - MAX8997_CHARGER_TYPE_NONE = 0, - MAX8997_CHARGER_TYPE_USB, - MAX8997_CHARGER_TYPE_DOWNSTREAM_PORT, - MAX8997_CHARGER_TYPE_DEDICATED_CHG, - MAX8997_CHARGER_TYPE_500MA, - MAX8997_CHARGER_TYPE_1A, - MAX8997_CHARGER_TYPE_DEAD_BATTERY = 7, -}; - struct max8997_muic_reg_data { u8 addr; u8 data; @@ -107,6 +92,16 @@ struct max8997_muic_reg_data { struct max8997_muic_platform_data { struct max8997_muic_reg_data *init_data; int num_init_data; + + /* Check cable state after certain delay */ + int detcable_delay_ms; + + /* + * Default usb/uart path whether UART/USB or AUX_UART/AUX_USB + * h/w path of COMP2/COMN1 on CONTROL1 register. + */ + int path_usb; + int path_uart; }; enum max8997_haptic_motor_type { diff --git a/include/linux/ntb.h b/include/linux/ntb.h new file mode 100644 index 000000000000..f6a15205853b --- /dev/null +++ b/include/linux/ntb.h @@ -0,0 +1,83 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2012 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * BSD LICENSE + * + * Copyright(c) 2012 Intel Corporation. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copy + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * Intel PCIe NTB Linux driver + * + * Contact Information: + * Jon Mason <jon.mason@intel.com> + */ + +struct ntb_transport_qp; + +struct ntb_client { + struct device_driver driver; + int (*probe) (struct pci_dev *pdev); + void (*remove) (struct pci_dev *pdev); +}; + +int ntb_register_client(struct ntb_client *drvr); +void ntb_unregister_client(struct ntb_client *drvr); +int ntb_register_client_dev(char *device_name); +void ntb_unregister_client_dev(char *device_name); + +struct ntb_queue_handlers { + void (*rx_handler) (struct ntb_transport_qp *qp, void *qp_data, + void *data, int len); + void (*tx_handler) (struct ntb_transport_qp *qp, void *qp_data, + void *data, int len); + void (*event_handler) (void *data, int status); +}; + +unsigned char ntb_transport_qp_num(struct ntb_transport_qp *qp); +unsigned int ntb_transport_max_size(struct ntb_transport_qp *qp); +struct ntb_transport_qp * +ntb_transport_create_queue(void *data, struct pci_dev *pdev, + const struct ntb_queue_handlers *handlers); +void ntb_transport_free_queue(struct ntb_transport_qp *qp); +int ntb_transport_rx_enqueue(struct ntb_transport_qp *qp, void *cb, void *data, + unsigned int len); +int ntb_transport_tx_enqueue(struct ntb_transport_qp *qp, void *cb, void *data, + unsigned int len); +void *ntb_transport_rx_remove(struct ntb_transport_qp *qp, unsigned int *len); +void ntb_transport_link_up(struct ntb_transport_qp *qp); +void ntb_transport_link_down(struct ntb_transport_qp *qp); +bool ntb_transport_link_query(struct ntb_transport_qp *qp); diff --git a/include/linux/vmw_vmci_api.h b/include/linux/vmw_vmci_api.h new file mode 100644 index 000000000000..023430e265fe --- /dev/null +++ b/include/linux/vmw_vmci_api.h @@ -0,0 +1,82 @@ +/* + * VMware VMCI Driver + * + * Copyright (C) 2012 VMware, Inc. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation version 2 and no later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY + * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#ifndef __VMW_VMCI_API_H__ +#define __VMW_VMCI_API_H__ + +#include <linux/uidgid.h> +#include <linux/vmw_vmci_defs.h> + +#undef VMCI_KERNEL_API_VERSION +#define VMCI_KERNEL_API_VERSION_1 1 +#define VMCI_KERNEL_API_VERSION_2 2 +#define VMCI_KERNEL_API_VERSION VMCI_KERNEL_API_VERSION_2 + +typedef void (vmci_device_shutdown_fn) (void *device_registration, + void *user_data); + +int vmci_datagram_create_handle(u32 resource_id, u32 flags, + vmci_datagram_recv_cb recv_cb, + void *client_data, + struct vmci_handle *out_handle); +int vmci_datagram_create_handle_priv(u32 resource_id, u32 flags, u32 priv_flags, + vmci_datagram_recv_cb recv_cb, + void *client_data, + struct vmci_handle *out_handle); +int vmci_datagram_destroy_handle(struct vmci_handle handle); +int vmci_datagram_send(struct vmci_datagram *msg); +int vmci_doorbell_create(struct vmci_handle *handle, u32 flags, + u32 priv_flags, + vmci_callback notify_cb, void *client_data); +int vmci_doorbell_destroy(struct vmci_handle handle); +int vmci_doorbell_notify(struct vmci_handle handle, u32 priv_flags); +u32 vmci_get_context_id(void); +bool vmci_is_context_owner(u32 context_id, kuid_t uid); + +int vmci_event_subscribe(u32 event, + vmci_event_cb callback, void *callback_data, + u32 *subid); +int vmci_event_unsubscribe(u32 subid); +u32 vmci_context_get_priv_flags(u32 context_id); +int vmci_qpair_alloc(struct vmci_qp **qpair, + struct vmci_handle *handle, + u64 produce_qsize, + u64 consume_qsize, + u32 peer, u32 flags, u32 priv_flags); +int vmci_qpair_detach(struct vmci_qp **qpair); +int vmci_qpair_get_produce_indexes(const struct vmci_qp *qpair, + u64 *producer_tail, + u64 *consumer_head); +int vmci_qpair_get_consume_indexes(const struct vmci_qp *qpair, + u64 *consumer_tail, + u64 *producer_head); +s64 vmci_qpair_produce_free_space(const struct vmci_qp *qpair); +s64 vmci_qpair_produce_buf_ready(const struct vmci_qp *qpair); +s64 vmci_qpair_consume_free_space(const struct vmci_qp *qpair); +s64 vmci_qpair_consume_buf_ready(const struct vmci_qp *qpair); +ssize_t vmci_qpair_enqueue(struct vmci_qp *qpair, + const void *buf, size_t buf_size, int mode); +ssize_t vmci_qpair_dequeue(struct vmci_qp *qpair, + void *buf, size_t buf_size, int mode); +ssize_t vmci_qpair_peek(struct vmci_qp *qpair, void *buf, size_t buf_size, + int mode); +ssize_t vmci_qpair_enquev(struct vmci_qp *qpair, + void *iov, size_t iov_size, int mode); +ssize_t vmci_qpair_dequev(struct vmci_qp *qpair, + void *iov, size_t iov_size, int mode); +ssize_t vmci_qpair_peekv(struct vmci_qp *qpair, void *iov, size_t iov_size, + int mode); + +#endif /* !__VMW_VMCI_API_H__ */ diff --git a/include/linux/vmw_vmci_defs.h b/include/linux/vmw_vmci_defs.h new file mode 100644 index 000000000000..65ac54c61c18 --- /dev/null +++ b/include/linux/vmw_vmci_defs.h @@ -0,0 +1,880 @@ +/* + * VMware VMCI Driver + * + * Copyright (C) 2012 VMware, Inc. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation version 2 and no later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY + * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#ifndef _VMW_VMCI_DEF_H_ +#define _VMW_VMCI_DEF_H_ + +#include <linux/atomic.h> + +/* Register offsets. */ +#define VMCI_STATUS_ADDR 0x00 +#define VMCI_CONTROL_ADDR 0x04 +#define VMCI_ICR_ADDR 0x08 +#define VMCI_IMR_ADDR 0x0c +#define VMCI_DATA_OUT_ADDR 0x10 +#define VMCI_DATA_IN_ADDR 0x14 +#define VMCI_CAPS_ADDR 0x18 +#define VMCI_RESULT_LOW_ADDR 0x1c +#define VMCI_RESULT_HIGH_ADDR 0x20 + +/* Max number of devices. */ +#define VMCI_MAX_DEVICES 1 + +/* Status register bits. */ +#define VMCI_STATUS_INT_ON 0x1 + +/* Control register bits. */ +#define VMCI_CONTROL_RESET 0x1 +#define VMCI_CONTROL_INT_ENABLE 0x2 +#define VMCI_CONTROL_INT_DISABLE 0x4 + +/* Capabilities register bits. */ +#define VMCI_CAPS_HYPERCALL 0x1 +#define VMCI_CAPS_GUESTCALL 0x2 +#define VMCI_CAPS_DATAGRAM 0x4 +#define VMCI_CAPS_NOTIFICATIONS 0x8 + +/* Interrupt Cause register bits. */ +#define VMCI_ICR_DATAGRAM 0x1 +#define VMCI_ICR_NOTIFICATION 0x2 + +/* Interrupt Mask register bits. */ +#define VMCI_IMR_DATAGRAM 0x1 +#define VMCI_IMR_NOTIFICATION 0x2 + +/* Interrupt type. */ +enum { + VMCI_INTR_TYPE_INTX = 0, + VMCI_INTR_TYPE_MSI = 1, + VMCI_INTR_TYPE_MSIX = 2, +}; + +/* Maximum MSI/MSI-X interrupt vectors in the device. */ +#define VMCI_MAX_INTRS 2 + +/* + * Supported interrupt vectors. There is one for each ICR value above, + * but here they indicate the position in the vector array/message ID. + */ +enum { + VMCI_INTR_DATAGRAM = 0, + VMCI_INTR_NOTIFICATION = 1, +}; + +/* + * A single VMCI device has an upper limit of 128MB on the amount of + * memory that can be used for queue pairs. + */ +#define VMCI_MAX_GUEST_QP_MEMORY (128 * 1024 * 1024) + +/* + * Queues with pre-mapped data pages must be small, so that we don't pin + * too much kernel memory (especially on vmkernel). We limit a queuepair to + * 32 KB, or 16 KB per queue for symmetrical pairs. + */ +#define VMCI_MAX_PINNED_QP_MEMORY (32 * 1024) + +/* + * We have a fixed set of resource IDs available in the VMX. + * This allows us to have a very simple implementation since we statically + * know how many will create datagram handles. If a new caller arrives and + * we have run out of slots we can manually increment the maximum size of + * available resource IDs. + * + * VMCI reserved hypervisor datagram resource IDs. + */ +enum { + VMCI_RESOURCES_QUERY = 0, + VMCI_GET_CONTEXT_ID = 1, + VMCI_SET_NOTIFY_BITMAP = 2, + VMCI_DOORBELL_LINK = 3, + VMCI_DOORBELL_UNLINK = 4, + VMCI_DOORBELL_NOTIFY = 5, + /* + * VMCI_DATAGRAM_REQUEST_MAP and VMCI_DATAGRAM_REMOVE_MAP are + * obsoleted by the removal of VM to VM communication. + */ + VMCI_DATAGRAM_REQUEST_MAP = 6, + VMCI_DATAGRAM_REMOVE_MAP = 7, + VMCI_EVENT_SUBSCRIBE = 8, + VMCI_EVENT_UNSUBSCRIBE = 9, + VMCI_QUEUEPAIR_ALLOC = 10, + VMCI_QUEUEPAIR_DETACH = 11, + + /* + * VMCI_VSOCK_VMX_LOOKUP was assigned to 12 for Fusion 3.0/3.1, + * WS 7.0/7.1 and ESX 4.1 + */ + VMCI_HGFS_TRANSPORT = 13, + VMCI_UNITY_PBRPC_REGISTER = 14, + VMCI_RPC_PRIVILEGED = 15, + VMCI_RPC_UNPRIVILEGED = 16, + VMCI_RESOURCE_MAX = 17, +}; + +/* + * struct vmci_handle - Ownership information structure + * @context: The VMX context ID. + * @resource: The resource ID (used for locating in resource hash). + * + * The vmci_handle structure is used to track resources used within + * vmw_vmci. + */ +struct vmci_handle { + u32 context; + u32 resource; +}; + +#define vmci_make_handle(_cid, _rid) \ + (struct vmci_handle){ .context = _cid, .resource = _rid } + +static inline bool vmci_handle_is_equal(struct vmci_handle h1, + struct vmci_handle h2) +{ + return h1.context == h2.context && h1.resource == h2.resource; +} + +#define VMCI_INVALID_ID ~0 +static const struct vmci_handle VMCI_INVALID_HANDLE = { + .context = VMCI_INVALID_ID, + .resource = VMCI_INVALID_ID +}; + +static inline bool vmci_handle_is_invalid(struct vmci_handle h) +{ + return vmci_handle_is_equal(h, VMCI_INVALID_HANDLE); +} + +/* + * The below defines can be used to send anonymous requests. + * This also indicates that no response is expected. + */ +#define VMCI_ANON_SRC_CONTEXT_ID VMCI_INVALID_ID +#define VMCI_ANON_SRC_RESOURCE_ID VMCI_INVALID_ID +static const struct vmci_handle VMCI_ANON_SRC_HANDLE = { + .context = VMCI_ANON_SRC_CONTEXT_ID, + .resource = VMCI_ANON_SRC_RESOURCE_ID +}; + +/* The lowest 16 context ids are reserved for internal use. */ +#define VMCI_RESERVED_CID_LIMIT ((u32) 16) + +/* + * Hypervisor context id, used for calling into hypervisor + * supplied services from the VM. + */ +#define VMCI_HYPERVISOR_CONTEXT_ID 0 + +/* + * Well-known context id, a logical context that contains a set of + * well-known services. This context ID is now obsolete. + */ +#define VMCI_WELL_KNOWN_CONTEXT_ID 1 + +/* + * Context ID used by host endpoints. + */ +#define VMCI_HOST_CONTEXT_ID 2 + +#define VMCI_CONTEXT_IS_VM(_cid) (VMCI_INVALID_ID != (_cid) && \ + (_cid) > VMCI_HOST_CONTEXT_ID) + +/* + * The VMCI_CONTEXT_RESOURCE_ID is used together with vmci_make_handle to make + * handles that refer to a specific context. + */ +#define VMCI_CONTEXT_RESOURCE_ID 0 + +/* + * VMCI error codes. + */ +enum { + VMCI_SUCCESS_QUEUEPAIR_ATTACH = 5, + VMCI_SUCCESS_QUEUEPAIR_CREATE = 4, + VMCI_SUCCESS_LAST_DETACH = 3, + VMCI_SUCCESS_ACCESS_GRANTED = 2, + VMCI_SUCCESS_ENTRY_DEAD = 1, + VMCI_SUCCESS = 0, + VMCI_ERROR_INVALID_RESOURCE = (-1), + VMCI_ERROR_INVALID_ARGS = (-2), + VMCI_ERROR_NO_MEM = (-3), + VMCI_ERROR_DATAGRAM_FAILED = (-4), + VMCI_ERROR_MORE_DATA = (-5), + VMCI_ERROR_NO_MORE_DATAGRAMS = (-6), + VMCI_ERROR_NO_ACCESS = (-7), + VMCI_ERROR_NO_HANDLE = (-8), + VMCI_ERROR_DUPLICATE_ENTRY = (-9), + VMCI_ERROR_DST_UNREACHABLE = (-10), + VMCI_ERROR_PAYLOAD_TOO_LARGE = (-11), + VMCI_ERROR_INVALID_PRIV = (-12), + VMCI_ERROR_GENERIC = (-13), + VMCI_ERROR_PAGE_ALREADY_SHARED = (-14), + VMCI_ERROR_CANNOT_SHARE_PAGE = (-15), + VMCI_ERROR_CANNOT_UNSHARE_PAGE = (-16), + VMCI_ERROR_NO_PROCESS = (-17), + VMCI_ERROR_NO_DATAGRAM = (-18), + VMCI_ERROR_NO_RESOURCES = (-19), + VMCI_ERROR_UNAVAILABLE = (-20), + VMCI_ERROR_NOT_FOUND = (-21), + VMCI_ERROR_ALREADY_EXISTS = (-22), + VMCI_ERROR_NOT_PAGE_ALIGNED = (-23), + VMCI_ERROR_INVALID_SIZE = (-24), + VMCI_ERROR_REGION_ALREADY_SHARED = (-25), + VMCI_ERROR_TIMEOUT = (-26), + VMCI_ERROR_DATAGRAM_INCOMPLETE = (-27), + VMCI_ERROR_INCORRECT_IRQL = (-28), + VMCI_ERROR_EVENT_UNKNOWN = (-29), + VMCI_ERROR_OBSOLETE = (-30), + VMCI_ERROR_QUEUEPAIR_MISMATCH = (-31), + VMCI_ERROR_QUEUEPAIR_NOTSET = (-32), + VMCI_ERROR_QUEUEPAIR_NOTOWNER = (-33), + VMCI_ERROR_QUEUEPAIR_NOTATTACHED = (-34), + VMCI_ERROR_QUEUEPAIR_NOSPACE = (-35), + VMCI_ERROR_QUEUEPAIR_NODATA = (-36), + VMCI_ERROR_BUSMEM_INVALIDATION = (-37), + VMCI_ERROR_MODULE_NOT_LOADED = (-38), + VMCI_ERROR_DEVICE_NOT_FOUND = (-39), + VMCI_ERROR_QUEUEPAIR_NOT_READY = (-40), + VMCI_ERROR_WOULD_BLOCK = (-41), + + /* VMCI clients should return error code within this range */ + VMCI_ERROR_CLIENT_MIN = (-500), + VMCI_ERROR_CLIENT_MAX = (-550), + + /* Internal error codes. */ + VMCI_SHAREDMEM_ERROR_BAD_CONTEXT = (-1000), +}; + +/* VMCI reserved events. */ +enum { + /* Only applicable to guest endpoints */ + VMCI_EVENT_CTX_ID_UPDATE = 0, + + /* Applicable to guest and host */ + VMCI_EVENT_CTX_REMOVED = 1, + + /* Only applicable to guest endpoints */ + VMCI_EVENT_QP_RESUMED = 2, + + /* Applicable to guest and host */ + VMCI_EVENT_QP_PEER_ATTACH = 3, + + /* Applicable to guest and host */ + VMCI_EVENT_QP_PEER_DETACH = 4, + + /* + * Applicable to VMX and vmk. On vmk, + * this event has the Context payload type. + */ + VMCI_EVENT_MEM_ACCESS_ON = 5, + + /* + * Applicable to VMX and vmk. Same as + * above for the payload type. + */ + VMCI_EVENT_MEM_ACCESS_OFF = 6, + VMCI_EVENT_MAX = 7, +}; + +/* + * Of the above events, a few are reserved for use in the VMX, and + * other endpoints (guest and host kernel) should not use them. For + * the rest of the events, we allow both host and guest endpoints to + * subscribe to them, to maintain the same API for host and guest + * endpoints. + */ +#define VMCI_EVENT_VALID_VMX(_event) ((_event) == VMCI_EVENT_MEM_ACCESS_ON || \ + (_event) == VMCI_EVENT_MEM_ACCESS_OFF) + +#define VMCI_EVENT_VALID(_event) ((_event) < VMCI_EVENT_MAX && \ + !VMCI_EVENT_VALID_VMX(_event)) + +/* Reserved guest datagram resource ids. */ +#define VMCI_EVENT_HANDLER 0 + +/* + * VMCI coarse-grained privileges (per context or host + * process/endpoint. An entity with the restricted flag is only + * allowed to interact with the hypervisor and trusted entities. + */ +enum { + VMCI_NO_PRIVILEGE_FLAGS = 0, + VMCI_PRIVILEGE_FLAG_RESTRICTED = 1, + VMCI_PRIVILEGE_FLAG_TRUSTED = 2, + VMCI_PRIVILEGE_ALL_FLAGS = (VMCI_PRIVILEGE_FLAG_RESTRICTED | + VMCI_PRIVILEGE_FLAG_TRUSTED), + VMCI_DEFAULT_PROC_PRIVILEGE_FLAGS = VMCI_NO_PRIVILEGE_FLAGS, + VMCI_LEAST_PRIVILEGE_FLAGS = VMCI_PRIVILEGE_FLAG_RESTRICTED, + VMCI_MAX_PRIVILEGE_FLAGS = VMCI_PRIVILEGE_FLAG_TRUSTED, +}; + +/* 0 through VMCI_RESERVED_RESOURCE_ID_MAX are reserved. */ +#define VMCI_RESERVED_RESOURCE_ID_MAX 1023 + +/* + * Driver version. + * + * Increment major version when you make an incompatible change. + * Compatibility goes both ways (old driver with new executable + * as well as new driver with old executable). + */ + +/* Never change VMCI_VERSION_SHIFT_WIDTH */ +#define VMCI_VERSION_SHIFT_WIDTH 16 +#define VMCI_MAKE_VERSION(_major, _minor) \ + ((_major) << VMCI_VERSION_SHIFT_WIDTH | (u16) (_minor)) + +#define VMCI_VERSION_MAJOR(v) ((u32) (v) >> VMCI_VERSION_SHIFT_WIDTH) +#define VMCI_VERSION_MINOR(v) ((u16) (v)) + +/* + * VMCI_VERSION is always the current version. Subsequently listed + * versions are ways of detecting previous versions of the connecting + * application (i.e., VMX). + * + * VMCI_VERSION_NOVMVM: This version removed support for VM to VM + * communication. + * + * VMCI_VERSION_NOTIFY: This version introduced doorbell notification + * support. + * + * VMCI_VERSION_HOSTQP: This version introduced host end point support + * for hosted products. + * + * VMCI_VERSION_PREHOSTQP: This is the version prior to the adoption of + * support for host end-points. + * + * VMCI_VERSION_PREVERS2: This fictional version number is intended to + * represent the version of a VMX which doesn't call into the driver + * with ioctl VERSION2 and thus doesn't establish its version with the + * driver. + */ + +#define VMCI_VERSION VMCI_VERSION_NOVMVM +#define VMCI_VERSION_NOVMVM VMCI_MAKE_VERSION(11, 0) +#define VMCI_VERSION_NOTIFY VMCI_MAKE_VERSION(10, 0) +#define VMCI_VERSION_HOSTQP VMCI_MAKE_VERSION(9, 0) +#define VMCI_VERSION_PREHOSTQP VMCI_MAKE_VERSION(8, 0) +#define VMCI_VERSION_PREVERS2 VMCI_MAKE_VERSION(1, 0) + +#define VMCI_SOCKETS_MAKE_VERSION(_p) \ + ((((_p)[0] & 0xFF) << 24) | (((_p)[1] & 0xFF) << 16) | ((_p)[2])) + +/* + * The VMCI IOCTLs. We use identity code 7, as noted in ioctl-number.h, and + * we start at sequence 9f. This gives us the same values that our shipping + * products use, starting at 1951, provided we leave out the direction and + * structure size. Note that VMMon occupies the block following us, starting + * at 2001. + */ +#define IOCTL_VMCI_VERSION _IO(7, 0x9f) /* 1951 */ +#define IOCTL_VMCI_INIT_CONTEXT _IO(7, 0xa0) +#define IOCTL_VMCI_QUEUEPAIR_SETVA _IO(7, 0xa4) +#define IOCTL_VMCI_NOTIFY_RESOURCE _IO(7, 0xa5) +#define IOCTL_VMCI_NOTIFICATIONS_RECEIVE _IO(7, 0xa6) +#define IOCTL_VMCI_VERSION2 _IO(7, 0xa7) +#define IOCTL_VMCI_QUEUEPAIR_ALLOC _IO(7, 0xa8) +#define IOCTL_VMCI_QUEUEPAIR_SETPAGEFILE _IO(7, 0xa9) +#define IOCTL_VMCI_QUEUEPAIR_DETACH _IO(7, 0xaa) +#define IOCTL_VMCI_DATAGRAM_SEND _IO(7, 0xab) +#define IOCTL_VMCI_DATAGRAM_RECEIVE _IO(7, 0xac) +#define IOCTL_VMCI_CTX_ADD_NOTIFICATION _IO(7, 0xaf) +#define IOCTL_VMCI_CTX_REMOVE_NOTIFICATION _IO(7, 0xb0) +#define IOCTL_VMCI_CTX_GET_CPT_STATE _IO(7, 0xb1) +#define IOCTL_VMCI_CTX_SET_CPT_STATE _IO(7, 0xb2) +#define IOCTL_VMCI_GET_CONTEXT_ID _IO(7, 0xb3) +#define IOCTL_VMCI_SOCKETS_VERSION _IO(7, 0xb4) +#define IOCTL_VMCI_SOCKETS_GET_AF_VALUE _IO(7, 0xb8) +#define IOCTL_VMCI_SOCKETS_GET_LOCAL_CID _IO(7, 0xb9) +#define IOCTL_VMCI_SET_NOTIFY _IO(7, 0xcb) /* 1995 */ +/*IOCTL_VMMON_START _IO(7, 0xd1)*/ /* 2001 */ + +/* + * struct vmci_queue_header - VMCI Queue Header information. + * + * A Queue cannot stand by itself as designed. Each Queue's header + * contains a pointer into itself (the producer_tail) and into its peer + * (consumer_head). The reason for the separation is one of + * accessibility: Each end-point can modify two things: where the next + * location to enqueue is within its produce_q (producer_tail); and + * where the next dequeue location is in its consume_q (consumer_head). + * + * An end-point cannot modify the pointers of its peer (guest to + * guest; NOTE that in the host both queue headers are mapped r/w). + * But, each end-point needs read access to both Queue header + * structures in order to determine how much space is used (or left) + * in the Queue. This is because for an end-point to know how full + * its produce_q is, it needs to use the consumer_head that points into + * the produce_q but -that- consumer_head is in the Queue header for + * that end-points consume_q. + * + * Thoroughly confused? Sorry. + * + * producer_tail: the point to enqueue new entrants. When you approach + * a line in a store, for example, you walk up to the tail. + * + * consumer_head: the point in the queue from which the next element is + * dequeued. In other words, who is next in line is he who is at the + * head of the line. + * + * Also, producer_tail points to an empty byte in the Queue, whereas + * consumer_head points to a valid byte of data (unless producer_tail == + * consumer_head in which case consumer_head does not point to a valid + * byte of data). + * + * For a queue of buffer 'size' bytes, the tail and head pointers will be in + * the range [0, size-1]. + * + * If produce_q_header->producer_tail == consume_q_header->consumer_head + * then the produce_q is empty. + */ +struct vmci_queue_header { + /* All fields are 64bit and aligned. */ + struct vmci_handle handle; /* Identifier. */ + atomic64_t producer_tail; /* Offset in this queue. */ + atomic64_t consumer_head; /* Offset in peer queue. */ +}; + +/* + * struct vmci_datagram - Base struct for vmci datagrams. + * @dst: A vmci_handle that tracks the destination of the datagram. + * @src: A vmci_handle that tracks the source of the datagram. + * @payload_size: The size of the payload. + * + * vmci_datagram structs are used when sending vmci datagrams. They include + * the necessary source and destination information to properly route + * the information along with the size of the package. + */ +struct vmci_datagram { + struct vmci_handle dst; + struct vmci_handle src; + u64 payload_size; +}; + +/* + * Second flag is for creating a well-known handle instead of a per context + * handle. Next flag is for deferring datagram delivery, so that the + * datagram callback is invoked in a delayed context (not interrupt context). + */ +#define VMCI_FLAG_DG_NONE 0 +#define VMCI_FLAG_WELLKNOWN_DG_HND 0x1 +#define VMCI_FLAG_ANYCID_DG_HND 0x2 +#define VMCI_FLAG_DG_DELAYED_CB 0x4 + +/* + * Maximum supported size of a VMCI datagram for routable datagrams. + * Datagrams going to the hypervisor are allowed to be larger. + */ +#define VMCI_MAX_DG_SIZE (17 * 4096) +#define VMCI_MAX_DG_PAYLOAD_SIZE (VMCI_MAX_DG_SIZE - \ + sizeof(struct vmci_datagram)) +#define VMCI_DG_PAYLOAD(_dg) (void *)((char *)(_dg) + \ + sizeof(struct vmci_datagram)) +#define VMCI_DG_HEADERSIZE sizeof(struct vmci_datagram) +#define VMCI_DG_SIZE(_dg) (VMCI_DG_HEADERSIZE + (size_t)(_dg)->payload_size) +#define VMCI_DG_SIZE_ALIGNED(_dg) ((VMCI_DG_SIZE(_dg) + 7) & (~((size_t) 0x7))) +#define VMCI_MAX_DATAGRAM_QUEUE_SIZE (VMCI_MAX_DG_SIZE * 2) + +struct vmci_event_payload_qp { + struct vmci_handle handle; /* queue_pair handle. */ + u32 peer_id; /* Context id of attaching/detaching VM. */ + u32 _pad; +}; + +/* Flags for VMCI queue_pair API. */ +enum { + /* Fail alloc if QP not created by peer. */ + VMCI_QPFLAG_ATTACH_ONLY = 1 << 0, + + /* Only allow attaches from local context. */ + VMCI_QPFLAG_LOCAL = 1 << 1, + + /* Host won't block when guest is quiesced. */ + VMCI_QPFLAG_NONBLOCK = 1 << 2, + + /* Pin data pages in ESX. Used with NONBLOCK */ + VMCI_QPFLAG_PINNED = 1 << 3, + + /* Update the following flag when adding new flags. */ + VMCI_QP_ALL_FLAGS = (VMCI_QPFLAG_ATTACH_ONLY | VMCI_QPFLAG_LOCAL | + VMCI_QPFLAG_NONBLOCK | VMCI_QPFLAG_PINNED), + + /* Convenience flags */ + VMCI_QP_ASYMM = (VMCI_QPFLAG_NONBLOCK | VMCI_QPFLAG_PINNED), + VMCI_QP_ASYMM_PEER = (VMCI_QPFLAG_ATTACH_ONLY | VMCI_QP_ASYMM), +}; + +/* + * We allow at least 1024 more event datagrams from the hypervisor past the + * normally allowed datagrams pending for a given context. We define this + * limit on event datagrams from the hypervisor to guard against DoS attack + * from a malicious VM which could repeatedly attach to and detach from a queue + * pair, causing events to be queued at the destination VM. However, the rate + * at which such events can be generated is small since it requires a VM exit + * and handling of queue pair attach/detach call at the hypervisor. Event + * datagrams may be queued up at the destination VM if it has interrupts + * disabled or if it is not draining events for some other reason. 1024 + * datagrams is a grossly conservative estimate of the time for which + * interrupts may be disabled in the destination VM, but at the same time does + * not exacerbate the memory pressure problem on the host by much (size of each + * event datagram is small). + */ +#define VMCI_MAX_DATAGRAM_AND_EVENT_QUEUE_SIZE \ + (VMCI_MAX_DATAGRAM_QUEUE_SIZE + \ + 1024 * (sizeof(struct vmci_datagram) + \ + sizeof(struct vmci_event_data_max))) + +/* + * Struct used for querying, via VMCI_RESOURCES_QUERY, the availability of + * hypervisor resources. Struct size is 16 bytes. All fields in struct are + * aligned to their natural alignment. + */ +struct vmci_resource_query_hdr { + struct vmci_datagram hdr; + u32 num_resources; + u32 _padding; +}; + +/* + * Convenience struct for negotiating vectors. Must match layout of + * VMCIResourceQueryHdr minus the struct vmci_datagram header. + */ +struct vmci_resource_query_msg { + u32 num_resources; + u32 _padding; + u32 resources[1]; +}; + +/* + * The maximum number of resources that can be queried using + * VMCI_RESOURCE_QUERY is 31, as the result is encoded in the lower 31 + * bits of a positive return value. Negative values are reserved for + * errors. + */ +#define VMCI_RESOURCE_QUERY_MAX_NUM 31 + +/* Maximum size for the VMCI_RESOURCE_QUERY request. */ +#define VMCI_RESOURCE_QUERY_MAX_SIZE \ + (sizeof(struct vmci_resource_query_hdr) + \ + sizeof(u32) * VMCI_RESOURCE_QUERY_MAX_NUM) + +/* + * Struct used for setting the notification bitmap. All fields in + * struct are aligned to their natural alignment. + */ +struct vmci_notify_bm_set_msg { + struct vmci_datagram hdr; + u32 bitmap_ppn; + u32 _pad; +}; + +/* + * Struct used for linking a doorbell handle with an index in the + * notify bitmap. All fields in struct are aligned to their natural + * alignment. + */ +struct vmci_doorbell_link_msg { + struct vmci_datagram hdr; + struct vmci_handle handle; + u64 notify_idx; +}; + +/* + * Struct used for unlinking a doorbell handle from an index in the + * notify bitmap. All fields in struct are aligned to their natural + * alignment. + */ +struct vmci_doorbell_unlink_msg { + struct vmci_datagram hdr; + struct vmci_handle handle; +}; + +/* + * Struct used for generating a notification on a doorbell handle. All + * fields in struct are aligned to their natural alignment. + */ +struct vmci_doorbell_notify_msg { + struct vmci_datagram hdr; + struct vmci_handle handle; +}; + +/* + * This struct is used to contain data for events. Size of this struct is a + * multiple of 8 bytes, and all fields are aligned to their natural alignment. + */ +struct vmci_event_data { + u32 event; /* 4 bytes. */ + u32 _pad; + /* Event payload is put here. */ +}; + +/* + * Define the different VMCI_EVENT payload data types here. All structs must + * be a multiple of 8 bytes, and fields must be aligned to their natural + * alignment. + */ +struct vmci_event_payld_ctx { + u32 context_id; /* 4 bytes. */ + u32 _pad; +}; + +struct vmci_event_payld_qp { + struct vmci_handle handle; /* queue_pair handle. */ + u32 peer_id; /* Context id of attaching/detaching VM. */ + u32 _pad; +}; + +/* + * We define the following struct to get the size of the maximum event + * data the hypervisor may send to the guest. If adding a new event + * payload type above, add it to the following struct too (inside the + * union). + */ +struct vmci_event_data_max { + struct vmci_event_data event_data; + union { + struct vmci_event_payld_ctx context_payload; + struct vmci_event_payld_qp qp_payload; + } ev_data_payload; +}; + +/* + * Struct used for VMCI_EVENT_SUBSCRIBE/UNSUBSCRIBE and + * VMCI_EVENT_HANDLER messages. Struct size is 32 bytes. All fields + * in struct are aligned to their natural alignment. + */ +struct vmci_event_msg { + struct vmci_datagram hdr; + + /* Has event type and payload. */ + struct vmci_event_data event_data; + + /* Payload gets put here. */ +}; + +/* Event with context payload. */ +struct vmci_event_ctx { + struct vmci_event_msg msg; + struct vmci_event_payld_ctx payload; +}; + +/* Event with QP payload. */ +struct vmci_event_qp { + struct vmci_event_msg msg; + struct vmci_event_payld_qp payload; +}; + +/* + * Structs used for queue_pair alloc and detach messages. We align fields of + * these structs to 64bit boundaries. + */ +struct vmci_qp_alloc_msg { + struct vmci_datagram hdr; + struct vmci_handle handle; + u32 peer; + u32 flags; + u64 produce_size; + u64 consume_size; + u64 num_ppns; + + /* List of PPNs placed here. */ +}; + +struct vmci_qp_detach_msg { + struct vmci_datagram hdr; + struct vmci_handle handle; +}; + +/* VMCI Doorbell API. */ +#define VMCI_FLAG_DELAYED_CB 0x01 + +typedef void (*vmci_callback) (void *client_data); + +/* + * struct vmci_qp - A vmw_vmci queue pair handle. + * + * This structure is used as a handle to a queue pair created by + * VMCI. It is intentionally left opaque to clients. + */ +struct vmci_qp; + +/* Callback needed for correctly waiting on events. */ +typedef int (*vmci_datagram_recv_cb) (void *client_data, + struct vmci_datagram *msg); + +/* VMCI Event API. */ +typedef void (*vmci_event_cb) (u32 sub_id, const struct vmci_event_data *ed, + void *client_data); + +/* + * We use the following inline function to access the payload data + * associated with an event data. + */ +static inline const void * +vmci_event_data_const_payload(const struct vmci_event_data *ev_data) +{ + return (const char *)ev_data + sizeof(*ev_data); +} + +static inline void *vmci_event_data_payload(struct vmci_event_data *ev_data) +{ + return (void *)vmci_event_data_const_payload(ev_data); +} + +/* + * Helper to add a given offset to a head or tail pointer. Wraps the + * value of the pointer around the max size of the queue. + */ +static inline void vmci_qp_add_pointer(atomic64_t *var, + size_t add, + u64 size) +{ + u64 new_val = atomic64_read(var); + + if (new_val >= size - add) + new_val -= size; + + new_val += add; + + atomic64_set(var, new_val); +} + +/* + * Helper routine to get the Producer Tail from the supplied queue. + */ +static inline u64 +vmci_q_header_producer_tail(const struct vmci_queue_header *q_header) +{ + struct vmci_queue_header *qh = (struct vmci_queue_header *)q_header; + return atomic64_read(&qh->producer_tail); +} + +/* + * Helper routine to get the Consumer Head from the supplied queue. + */ +static inline u64 +vmci_q_header_consumer_head(const struct vmci_queue_header *q_header) +{ + struct vmci_queue_header *qh = (struct vmci_queue_header *)q_header; + return atomic64_read(&qh->consumer_head); +} + +/* + * Helper routine to increment the Producer Tail. Fundamentally, + * vmci_qp_add_pointer() is used to manipulate the tail itself. + */ +static inline void +vmci_q_header_add_producer_tail(struct vmci_queue_header *q_header, + size_t add, + u64 queue_size) +{ + vmci_qp_add_pointer(&q_header->producer_tail, add, queue_size); +} + +/* + * Helper routine to increment the Consumer Head. Fundamentally, + * vmci_qp_add_pointer() is used to manipulate the head itself. + */ +static inline void +vmci_q_header_add_consumer_head(struct vmci_queue_header *q_header, + size_t add, + u64 queue_size) +{ + vmci_qp_add_pointer(&q_header->consumer_head, add, queue_size); +} + +/* + * Helper routine for getting the head and the tail pointer for a queue. + * Both the VMCIQueues are needed to get both the pointers for one queue. + */ +static inline void +vmci_q_header_get_pointers(const struct vmci_queue_header *produce_q_header, + const struct vmci_queue_header *consume_q_header, + u64 *producer_tail, + u64 *consumer_head) +{ + if (producer_tail) + *producer_tail = vmci_q_header_producer_tail(produce_q_header); + + if (consumer_head) + *consumer_head = vmci_q_header_consumer_head(consume_q_header); +} + +static inline void vmci_q_header_init(struct vmci_queue_header *q_header, + const struct vmci_handle handle) +{ + q_header->handle = handle; + atomic64_set(&q_header->producer_tail, 0); + atomic64_set(&q_header->consumer_head, 0); +} + +/* + * Finds available free space in a produce queue to enqueue more + * data or reports an error if queue pair corruption is detected. + */ +static s64 +vmci_q_header_free_space(const struct vmci_queue_header *produce_q_header, + const struct vmci_queue_header *consume_q_header, + const u64 produce_q_size) +{ + u64 tail; + u64 head; + u64 free_space; + + tail = vmci_q_header_producer_tail(produce_q_header); + head = vmci_q_header_consumer_head(consume_q_header); + + if (tail >= produce_q_size || head >= produce_q_size) + return VMCI_ERROR_INVALID_SIZE; + + /* + * Deduct 1 to avoid tail becoming equal to head which causes + * ambiguity. If head and tail are equal it means that the + * queue is empty. + */ + if (tail >= head) + free_space = produce_q_size - (tail - head) - 1; + else + free_space = head - tail - 1; + + return free_space; +} + +/* + * vmci_q_header_free_space() does all the heavy lifting of + * determing the number of free bytes in a Queue. This routine, + * then subtracts that size from the full size of the Queue so + * the caller knows how many bytes are ready to be dequeued. + * Results: + * On success, available data size in bytes (up to MAX_INT64). + * On failure, appropriate error code. + */ +static inline s64 +vmci_q_header_buf_ready(const struct vmci_queue_header *consume_q_header, + const struct vmci_queue_header *produce_q_header, + const u64 consume_q_size) +{ + s64 free_space; + + free_space = vmci_q_header_free_space(consume_q_header, + produce_q_header, consume_q_size); + if (free_space < VMCI_SUCCESS) + return free_space; + + return consume_q_size - free_space - 1; +} + + +#endif /* _VMW_VMCI_DEF_H_ */ diff --git a/tools/hv/hv_kvp_daemon.c b/tools/hv/hv_kvp_daemon.c index d25a46925e61..c800ea4c8bf9 100644 --- a/tools/hv/hv_kvp_daemon.c +++ b/tools/hv/hv_kvp_daemon.c @@ -97,7 +97,7 @@ static struct utsname uts_buf; * The location of the interface configuration file. */ -#define KVP_CONFIG_LOC "/var/opt/" +#define KVP_CONFIG_LOC "/var/lib/hyperv" #define MAX_FILE_NAME 100 #define ENTRIES_PER_BLOCK 50 @@ -151,7 +151,7 @@ static void kvp_update_file(int pool) */ kvp_acquire_lock(pool); - filep = fopen(kvp_file_info[pool].fname, "w"); + filep = fopen(kvp_file_info[pool].fname, "we"); if (!filep) { kvp_release_lock(pool); syslog(LOG_ERR, "Failed to open file, pool: %d", pool); @@ -182,7 +182,7 @@ static void kvp_update_mem_state(int pool) kvp_acquire_lock(pool); - filep = fopen(kvp_file_info[pool].fname, "r"); + filep = fopen(kvp_file_info[pool].fname, "re"); if (!filep) { kvp_release_lock(pool); syslog(LOG_ERR, "Failed to open file, pool: %d", pool); @@ -234,9 +234,9 @@ static int kvp_file_init(void) int i; int alloc_unit = sizeof(struct kvp_record) * ENTRIES_PER_BLOCK; - if (access("/var/opt/hyperv", F_OK)) { - if (mkdir("/var/opt/hyperv", S_IRUSR | S_IWUSR | S_IROTH)) { - syslog(LOG_ERR, " Failed to create /var/opt/hyperv"); + if (access(KVP_CONFIG_LOC, F_OK)) { + if (mkdir(KVP_CONFIG_LOC, 0755 /* rwxr-xr-x */)) { + syslog(LOG_ERR, " Failed to create %s", KVP_CONFIG_LOC); exit(EXIT_FAILURE); } } @@ -245,14 +245,14 @@ static int kvp_file_init(void) fname = kvp_file_info[i].fname; records_read = 0; num_blocks = 1; - sprintf(fname, "/var/opt/hyperv/.kvp_pool_%d", i); - fd = open(fname, O_RDWR | O_CREAT, S_IRUSR | S_IWUSR | S_IROTH); + sprintf(fname, "%s/.kvp_pool_%d", KVP_CONFIG_LOC, i); + fd = open(fname, O_RDWR | O_CREAT | O_CLOEXEC, 0644 /* rw-r--r-- */); if (fd == -1) return 1; - filep = fopen(fname, "r"); + filep = fopen(fname, "re"); if (!filep) return 1; @@ -1162,16 +1162,13 @@ static int process_ip_string(FILE *f, char *ip_string, int type) snprintf(str, sizeof(str), "%s", "DNS"); break; } - if (i != 0) { - if (type != DNS) { - snprintf(sub_str, sizeof(sub_str), - "_%d", i++); - } else { - snprintf(sub_str, sizeof(sub_str), - "%d", ++i); - } - } else if (type == DNS) { + + if (type == DNS) { snprintf(sub_str, sizeof(sub_str), "%d", ++i); + } else if (type == GATEWAY && i == 0) { + ++i; + } else { + snprintf(sub_str, sizeof(sub_str), "%d", i++); } @@ -1191,17 +1188,13 @@ static int process_ip_string(FILE *f, char *ip_string, int type) snprintf(str, sizeof(str), "%s", "DNS"); break; } - if ((j != 0) || (type == DNS)) { - if (type != DNS) { - snprintf(sub_str, sizeof(sub_str), - "_%d", j++); - } else { - snprintf(sub_str, sizeof(sub_str), - "%d", ++i); - } - } else if (type == DNS) { - snprintf(sub_str, sizeof(sub_str), - "%d", ++i); + + if (type == DNS) { + snprintf(sub_str, sizeof(sub_str), "%d", ++i); + } else if (j == 0) { + ++j; + } else { + snprintf(sub_str, sizeof(sub_str), "_%d", j++); } } else { return HV_INVALIDARG; @@ -1244,18 +1237,19 @@ static int kvp_set_ip_info(char *if_name, struct hv_kvp_ipaddr_value *new_val) * Here is the format of the ip configuration file: * * HWADDR=macaddr - * IF_NAME=interface name - * DHCP=yes (This is optional; if yes, DHCP is configured) + * DEVICE=interface name + * BOOTPROTO=<protocol> (where <protocol> is "dhcp" if DHCP is configured + * or "none" if no boot-time protocol should be used) * - * IPADDR=ipaddr1 - * IPADDR_1=ipaddr2 - * IPADDR_x=ipaddry (where y = x + 1) + * IPADDR0=ipaddr1 + * IPADDR1=ipaddr2 + * IPADDRx=ipaddry (where y = x + 1) * - * NETMASK=netmask1 - * NETMASK_x=netmasky (where y = x + 1) + * NETMASK0=netmask1 + * NETMASKx=netmasky (where y = x + 1) * * GATEWAY=ipaddr1 - * GATEWAY_x=ipaddry (where y = x + 1) + * GATEWAYx=ipaddry (where y = x + 1) * * DNSx=ipaddrx (where first DNS address is tagged as DNS1 etc) * @@ -1271,7 +1265,7 @@ static int kvp_set_ip_info(char *if_name, struct hv_kvp_ipaddr_value *new_val) */ snprintf(if_file, sizeof(if_file), "%s%s%s", KVP_CONFIG_LOC, - "hyperv/ifcfg-", if_name); + "/ifcfg-", if_name); file = fopen(if_file, "w"); @@ -1294,12 +1288,12 @@ static int kvp_set_ip_info(char *if_name, struct hv_kvp_ipaddr_value *new_val) if (error) goto setval_error; - error = kvp_write_file(file, "IF_NAME", "", if_name); + error = kvp_write_file(file, "DEVICE", "", if_name); if (error) goto setval_error; if (new_val->dhcp_enabled) { - error = kvp_write_file(file, "DHCP", "", "yes"); + error = kvp_write_file(file, "BOOTPROTO", "", "dhcp"); if (error) goto setval_error; @@ -1307,6 +1301,11 @@ static int kvp_set_ip_info(char *if_name, struct hv_kvp_ipaddr_value *new_val) * We are done!. */ goto setval_done; + + } else { + error = kvp_write_file(file, "BOOTPROTO", "", "none"); + if (error) + goto setval_error; } /* diff --git a/tools/hv/hv_set_ifconfig.sh b/tools/hv/hv_set_ifconfig.sh index 3e9427e08d80..735aafd64a3f 100755 --- a/tools/hv/hv_set_ifconfig.sh +++ b/tools/hv/hv_set_ifconfig.sh @@ -20,18 +20,19 @@ # Here is the format of the ip configuration file: # # HWADDR=macaddr -# IF_NAME=interface name -# DHCP=yes (This is optional; if yes, DHCP is configured) +# DEVICE=interface name +# BOOTPROTO=<protocol> (where <protocol> is "dhcp" if DHCP is configured +# or "none" if no boot-time protocol should be used) # -# IPADDR=ipaddr1 -# IPADDR_1=ipaddr2 -# IPADDR_x=ipaddry (where y = x + 1) +# IPADDR0=ipaddr1 +# IPADDR1=ipaddr2 +# IPADDRx=ipaddry (where y = x + 1) # -# NETMASK=netmask1 -# NETMASK_x=netmasky (where y = x + 1) +# NETMASK0=netmask1 +# NETMASKx=netmasky (where y = x + 1) # # GATEWAY=ipaddr1 -# GATEWAY_x=ipaddry (where y = x + 1) +# GATEWAYx=ipaddry (where y = x + 1) # # DNSx=ipaddrx (where first DNS address is tagged as DNS1 etc) # @@ -53,11 +54,6 @@ echo "NM_CONTROLLED=no" >> $1 echo "PEERDNS=yes" >> $1 echo "ONBOOT=yes" >> $1 -dhcp=$(grep "DHCP" $1 2>/dev/null) -if [ "$dhcp" != "" ]; -then -echo "BOOTPROTO=dhcp" >> $1; -fi cp $1 /etc/sysconfig/network-scripts/ @@ -65,4 +61,4 @@ cp $1 /etc/sysconfig/network-scripts/ interface=$(echo $1 | awk -F - '{ print $2 }') /sbin/ifdown $interface 2>/dev/null -/sbin/ifup $interfac 2>/dev/null +/sbin/ifup $interface 2>/dev/null |