diff options
| -rw-r--r-- | arch/powerpc/platforms/powermac/feature.c | 6 | ||||
| -rw-r--r-- | drivers/net/sungem.c | 55 |
2 files changed, 27 insertions, 34 deletions
diff --git a/arch/powerpc/platforms/powermac/feature.c b/arch/powerpc/platforms/powermac/feature.c index 2296f3d46ca8..558dd0692092 100644 --- a/arch/powerpc/platforms/powermac/feature.c +++ b/arch/powerpc/platforms/powermac/feature.c @@ -910,18 +910,16 @@ core99_gmac_phy_reset(struct device_node *node, long param, long value) macio->type != macio_intrepid) return -ENODEV; - printk(KERN_DEBUG "Hard reset of PHY chip ...\n"); - LOCK(flags); MACIO_OUT8(KL_GPIO_ETH_PHY_RESET, KEYLARGO_GPIO_OUTPUT_ENABLE); (void)MACIO_IN8(KL_GPIO_ETH_PHY_RESET); UNLOCK(flags); - msleep(10); + mdelay(10); LOCK(flags); MACIO_OUT8(KL_GPIO_ETH_PHY_RESET, /*KEYLARGO_GPIO_OUTPUT_ENABLE | */ KEYLARGO_GPIO_OUTOUT_DATA); UNLOCK(flags); - msleep(10); + mdelay(10); return 0; } diff --git a/drivers/net/sungem.c b/drivers/net/sungem.c index 55f3b856236e..28ce47a02408 100644 --- a/drivers/net/sungem.c +++ b/drivers/net/sungem.c @@ -1653,40 +1653,36 @@ static void gem_init_rings(struct gem *gp) /* Init PHY interface and start link poll state machine */ static void gem_init_phy(struct gem *gp) { - u32 mif_cfg; + u32 mifcfg; /* Revert MIF CFG setting done on stop_phy */ - mif_cfg = readl(gp->regs + MIF_CFG); - mif_cfg &= ~(MIF_CFG_PSELECT|MIF_CFG_POLL|MIF_CFG_BBMODE|MIF_CFG_MDI1); - mif_cfg |= MIF_CFG_MDI0; - writel(mif_cfg, gp->regs + MIF_CFG); - writel(PCS_DMODE_MGM, gp->regs + PCS_DMODE); - writel(MAC_XIFCFG_OE, gp->regs + MAC_XIFCFG); + mifcfg = readl(gp->regs + MIF_CFG); + mifcfg &= ~MIF_CFG_BBMODE; + writel(mifcfg, gp->regs + MIF_CFG); if (gp->pdev->vendor == PCI_VENDOR_ID_APPLE) { int i; - u16 ctrl; + /* Those delay sucks, the HW seem to love them though, I'll + * serisouly consider breaking some locks here to be able + * to schedule instead + */ + for (i = 0; i < 3; i++) { #ifdef CONFIG_PPC_PMAC - pmac_call_feature(PMAC_FTR_GMAC_PHY_RESET, gp->of_node, 0, 0); + pmac_call_feature(PMAC_FTR_GMAC_PHY_RESET, gp->of_node, 0, 0); + msleep(20); #endif - - /* Some PHYs used by apple have problem getting back - * to us, we do an additional reset here - */ - phy_write(gp, MII_BMCR, BMCR_RESET); - for (i = 0; i < 50; i++) { - if ((phy_read(gp, MII_BMCR) & BMCR_RESET) == 0) + /* Some PHYs used by apple have problem getting back to us, + * we do an additional reset here + */ + phy_write(gp, MII_BMCR, BMCR_RESET); + msleep(20); + if (phy_read(gp, MII_BMCR) != 0xffff) break; - msleep(10); + if (i == 2) + printk(KERN_WARNING "%s: GMAC PHY not responding !\n", + gp->dev->name); } - if (i == 50) - printk(KERN_WARNING "%s: GMAC PHY not responding !\n", - gp->dev->name); - /* Make sure isolate is off */ - ctrl = phy_read(gp, MII_BMCR); - if (ctrl & BMCR_ISOLATE) - phy_write(gp, MII_BMCR, ctrl & ~BMCR_ISOLATE); } if (gp->pdev->vendor == PCI_VENDOR_ID_SUN && @@ -2123,7 +2119,7 @@ static void gem_reinit_chip(struct gem *gp) /* Must be invoked with no lock held. */ static void gem_stop_phy(struct gem *gp, int wol) { - u32 mif_cfg; + u32 mifcfg; unsigned long flags; /* Let the chip settle down a bit, it seems that helps @@ -2134,9 +2130,9 @@ static void gem_stop_phy(struct gem *gp, int wol) /* Make sure we aren't polling PHY status change. We * don't currently use that feature though */ - mif_cfg = readl(gp->regs + MIF_CFG); - mif_cfg &= ~MIF_CFG_POLL; - writel(mif_cfg, gp->regs + MIF_CFG); + mifcfg = readl(gp->regs + MIF_CFG); + mifcfg &= ~MIF_CFG_POLL; + writel(mifcfg, gp->regs + MIF_CFG); if (wol && gp->has_wol) { unsigned char *e = &gp->dev->dev_addr[0]; @@ -2186,8 +2182,7 @@ static void gem_stop_phy(struct gem *gp, int wol) /* According to Apple, we must set the MDIO pins to this begnign * state or we may 1) eat more current, 2) damage some PHYs */ - mif_cfg = 0; - writel(mif_cfg | MIF_CFG_BBMODE, gp->regs + MIF_CFG); + writel(mifcfg | MIF_CFG_BBMODE, gp->regs + MIF_CFG); writel(0, gp->regs + MIF_BBCLK); writel(0, gp->regs + MIF_BBDATA); writel(0, gp->regs + MIF_BBOENAB); |