diff options
51 files changed, 1198 insertions, 499 deletions
diff --git a/Documentation/devicetree/bindings/phy/mxs-usb-phy.txt b/Documentation/devicetree/bindings/phy/mxs-usb-phy.txt index 379b84a567cc..1d25b04cd05e 100644 --- a/Documentation/devicetree/bindings/phy/mxs-usb-phy.txt +++ b/Documentation/devicetree/bindings/phy/mxs-usb-phy.txt @@ -12,6 +12,16 @@ Required properties: - interrupts: Should contain phy interrupt - fsl,anatop: phandle for anatop register, it is only for imx6 SoC series +Optional properties: +- fsl,tx-cal-45-dn-ohms: Integer [30-55]. Resistance (in ohms) of switchable + high-speed trimming resistor connected in parallel with the 45 ohm resistor + that terminates the DN output signal. Default: 45 +- fsl,tx-cal-45-dp-ohms: Integer [30-55]. Resistance (in ohms) of switchable + high-speed trimming resistor connected in parallel with the 45 ohm resistor + that terminates the DP output signal. Default: 45 +- fsl,tx-d-cal: Integer [79-119]. Current trimming value (as a percentage) of + the 17.78mA TX reference current. Default: 100 + Example: usbphy1: usbphy@020c9000 { compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy"; diff --git a/Documentation/devicetree/bindings/usb/dwc2.txt b/Documentation/devicetree/bindings/usb/dwc2.txt index 20a68bf2b4e7..7d16ebfaa5a1 100644 --- a/Documentation/devicetree/bindings/usb/dwc2.txt +++ b/Documentation/devicetree/bindings/usb/dwc2.txt @@ -26,7 +26,10 @@ Refer to phy/phy-bindings.txt for generic phy consumer properties - g-use-dma: enable dma usage in gadget driver. - g-rx-fifo-size: size of rx fifo size in gadget mode. - g-np-tx-fifo-size: size of non-periodic tx fifo size in gadget mode. -- g-tx-fifo-size: size of periodic tx fifo per endpoint (except ep0) in gadget mode. + +Deprecated properties: +- g-tx-fifo-size: size of periodic tx fifo per endpoint (except ep0) + in gadget mode. Example: diff --git a/Documentation/devicetree/bindings/usb/dwc3-cavium.txt b/Documentation/devicetree/bindings/usb/dwc3-cavium.txt new file mode 100644 index 000000000000..710b782ccf65 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/dwc3-cavium.txt @@ -0,0 +1,28 @@ +Cavium SuperSpeed DWC3 USB SoC controller + +Required properties: +- compatible: Should contain "cavium,octeon-7130-usb-uctl" + +Required child node: +A child node must exist to represent the core DWC3 IP block. The name of +the node is not important. The content of the node is defined in dwc3.txt. + +Example device node: + + uctl@1180069000000 { + compatible = "cavium,octeon-7130-usb-uctl"; + reg = <0x00011800 0x69000000 0x00000000 0x00000100>; + ranges; + #address-cells = <0x00000002>; + #size-cells = <0x00000002>; + refclk-frequency = <0x05f5e100>; + refclk-type-ss = "dlmc_ref_clk0"; + refclk-type-hs = "dlmc_ref_clk0"; + power = <0x00000002 0x00000002 0x00000001>; + xhci@1690000000000 { + compatible = "cavium,octeon-7130-xhci", "synopsys,dwc3"; + reg = <0x00016900 0x00000000 0x00000010 0x00000000>; + interrupt-parent = <0x00000010>; + interrupts = <0x00000009 0x00000004>; + }; + }; diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt index 7d7ce089b003..e3e6983288e3 100644 --- a/Documentation/devicetree/bindings/usb/dwc3.txt +++ b/Documentation/devicetree/bindings/usb/dwc3.txt @@ -13,7 +13,8 @@ Optional properties: in the array is expected to be a handle to the USB2/HS PHY and the second element is expected to be a handle to the USB3/SS PHY - phys: from the *Generic PHY* bindings - - phy-names: from the *Generic PHY* bindings + - phy-names: from the *Generic PHY* bindings; supported names are "usb2-phy" + or "usb3-phy". - snps,usb3_lpm_capable: determines if platform is USB3 LPM capable - snps,disable_scramble_quirk: true when SW should disable data scrambling. Only really useful for FPGA builds. @@ -39,6 +40,11 @@ Optional properties: disabling the suspend signal to the PHY. - snps,dis_rxdet_inp3_quirk: when set core will disable receiver detection in PHY P3 power state. + - snps,dis-u2-freeclk-exists-quirk: when set, clear the u2_freeclk_exists + in GUSB2PHYCFG, specify that USB2 PHY doesn't provide + a free-running PHY clock. + - snps,dis-del-phy-power-chg-quirk: when set core will change PHY power + from P0 to P1/P2/P3 without delay. - snps,is-utmi-l1-suspend: true when DWC3 asserts output signal utmi_l1_suspend_n, false when asserts utmi_sleep_n - snps,hird-threshold: HIRD threshold diff --git a/Documentation/devicetree/bindings/usb/generic.txt b/Documentation/devicetree/bindings/usb/generic.txt index bba825711873..bfadeb1c3bab 100644 --- a/Documentation/devicetree/bindings/usb/generic.txt +++ b/Documentation/devicetree/bindings/usb/generic.txt @@ -11,6 +11,11 @@ Optional properties: "peripheral" and "otg". In case this attribute isn't passed via DT, USB DRD controllers should default to OTG. + - phy_type: tells USB controllers that we want to configure the core to support + a UTMI+ PHY with an 8- or 16-bit interface if UTMI+ is + selected. Valid arguments are "utmi" and "utmi_wide". + In case this isn't passed via DT, USB controllers should + default to HW capability. - otg-rev: tells usb driver the release number of the OTG and EH supplement with which the device and its descriptors are compliant, in binary-coded decimal (i.e. 2.0 is 0200H). This @@ -34,6 +39,7 @@ dwc3@4a030000 { usb-phy = <&usb2_phy>, <&usb3,phy>; maximum-speed = "super-speed"; dr_mode = "otg"; + phy_type = "utmi_wide"; otg-rev = <0x0200>; adp-disable; }; diff --git a/Documentation/devicetree/bindings/usb/renesas_usbhs.txt b/Documentation/devicetree/bindings/usb/renesas_usbhs.txt index b6040563e51a..9e18e000339e 100644 --- a/Documentation/devicetree/bindings/usb/renesas_usbhs.txt +++ b/Documentation/devicetree/bindings/usb/renesas_usbhs.txt @@ -9,6 +9,7 @@ Required properties: - "renesas,usbhs-r8a7793" for r8a7793 (R-Car M2-N) compatible device - "renesas,usbhs-r8a7794" for r8a7794 (R-Car E2) compatible device - "renesas,usbhs-r8a7795" for r8a7795 (R-Car H3) compatible device + - "renesas,usbhs-r8a7796" for r8a7796 (R-Car M3-W) compatible device - "renesas,rcar-gen2-usbhs" for R-Car Gen2 compatible device - "renesas,rcar-gen3-usbhs" for R-Car Gen3 compatible device diff --git a/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt b/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt new file mode 100644 index 000000000000..0536a938e3ab --- /dev/null +++ b/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt @@ -0,0 +1,59 @@ +Rockchip SuperSpeed DWC3 USB SoC controller + +Required properties: +- compatible: should contain "rockchip,rk3399-dwc3" for rk3399 SoC +- clocks: A list of phandle + clock-specifier pairs for the + clocks listed in clock-names +- clock-names: Should contain the following: + "ref_clk" Controller reference clk, have to be 24 MHz + "suspend_clk" Controller suspend clk, have to be 24 MHz or 32 KHz + "bus_clk" Master/Core clock, have to be >= 62.5 MHz for SS + operation and >= 30MHz for HS operation + "grf_clk" Controller grf clk + +Required child node: +A child node must exist to represent the core DWC3 IP block. The name of +the node is not important. The content of the node is defined in dwc3.txt. + +Phy documentation is provided in the following places: +Documentation/devicetree/bindings/phy/rockchip,dwc3-usb-phy.txt + +Example device nodes: + + usbdrd3_0: usb@fe800000 { + compatible = "rockchip,rk3399-dwc3"; + clocks = <&cru SCLK_USB3OTG0_REF>, <&cru SCLK_USB3OTG0_SUSPEND>, + <&cru ACLK_USB3OTG0>, <&cru ACLK_USB3_GRF>; + clock-names = "ref_clk", "suspend_clk", + "bus_clk", "grf_clk"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + usbdrd_dwc3_0: dwc3@fe800000 { + compatible = "snps,dwc3"; + reg = <0x0 0xfe800000 0x0 0x100000>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + dr_mode = "otg"; + status = "disabled"; + }; + }; + + usbdrd3_1: usb@fe900000 { + compatible = "rockchip,rk3399-dwc3"; + clocks = <&cru SCLK_USB3OTG1_REF>, <&cru SCLK_USB3OTG1_SUSPEND>, + <&cru ACLK_USB3OTG1>, <&cru ACLK_USB3_GRF>; + clock-names = "ref_clk", "suspend_clk", + "bus_clk", "grf_clk"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + usbdrd_dwc3_1: dwc3@fe900000 { + compatible = "snps,dwc3"; + reg = <0x0 0xfe900000 0x0 0x100000>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + dr_mode = "otg"; + status = "disabled"; + }; + }; diff --git a/drivers/usb/common/ulpi.c b/drivers/usb/common/ulpi.c index e04a34e7a341..8b317702d761 100644 --- a/drivers/usb/common/ulpi.c +++ b/drivers/usb/common/ulpi.c @@ -21,13 +21,13 @@ int ulpi_read(struct ulpi *ulpi, u8 addr) { - return ulpi->ops->read(ulpi->ops, addr); + return ulpi->ops->read(ulpi->dev.parent, addr); } EXPORT_SYMBOL_GPL(ulpi_read); int ulpi_write(struct ulpi *ulpi, u8 addr, u8 val) { - return ulpi->ops->write(ulpi->ops, addr, val); + return ulpi->ops->write(ulpi->dev.parent, addr, val); } EXPORT_SYMBOL_GPL(ulpi_write); @@ -157,6 +157,8 @@ static int ulpi_register(struct device *dev, struct ulpi *ulpi) { int ret; + ulpi->dev.parent = dev; /* needed early for ops */ + /* Test the interface */ ret = ulpi_write(ulpi, ULPI_SCRATCH, 0xaa); if (ret < 0) @@ -175,7 +177,6 @@ static int ulpi_register(struct device *dev, struct ulpi *ulpi) ulpi->id.product = ulpi_read(ulpi, ULPI_PRODUCT_ID_LOW); ulpi->id.product |= ulpi_read(ulpi, ULPI_PRODUCT_ID_HIGH) << 8; - ulpi->dev.parent = dev; ulpi->dev.bus = &ulpi_bus; ulpi->dev.type = &ulpi_dev_type; dev_set_name(&ulpi->dev, "%s.ulpi", dev_name(dev)); @@ -202,7 +203,8 @@ static int ulpi_register(struct device *dev, struct ulpi *ulpi) * Allocates and registers a ULPI device and an interface for it. Called from * the USB controller that provides the ULPI interface. */ -struct ulpi *ulpi_register_interface(struct device *dev, struct ulpi_ops *ops) +struct ulpi *ulpi_register_interface(struct device *dev, + const struct ulpi_ops *ops) { struct ulpi *ulpi; int ret; @@ -212,7 +214,6 @@ struct ulpi *ulpi_register_interface(struct device *dev, struct ulpi_ops *ops) return ERR_PTR(-ENOMEM); ulpi->ops = ops; - ops->dev = dev; ret = ulpi_register(dev, ulpi); if (ret) { diff --git a/drivers/usb/dwc2/core.c b/drivers/usb/dwc2/core.c index 4135a5ff67ca..fa9b26b91507 100644 --- a/drivers/usb/dwc2/core.c +++ b/drivers/usb/dwc2/core.c @@ -238,6 +238,77 @@ int dwc2_enter_hibernation(struct dwc2_hsotg *hsotg) return ret; } +/** + * dwc2_wait_for_mode() - Waits for the controller mode. + * @hsotg: Programming view of the DWC_otg controller. + * @host_mode: If true, waits for host mode, otherwise device mode. + */ +static void dwc2_wait_for_mode(struct dwc2_hsotg *hsotg, + bool host_mode) +{ + ktime_t start; + ktime_t end; + unsigned int timeout = 110; + + dev_vdbg(hsotg->dev, "Waiting for %s mode\n", + host_mode ? "host" : "device"); + + start = ktime_get(); + + while (1) { + s64 ms; + + if (dwc2_is_host_mode(hsotg) == host_mode) { + dev_vdbg(hsotg->dev, "%s mode set\n", + host_mode ? "Host" : "Device"); + break; + } + + end = ktime_get(); + ms = ktime_to_ms(ktime_sub(end, start)); + + if (ms >= (s64)timeout) { + dev_warn(hsotg->dev, "%s: Couldn't set %s mode\n", + __func__, host_mode ? "host" : "device"); + break; + } + + usleep_range(1000, 2000); + } +} + +/** + * dwc2_iddig_filter_enabled() - Returns true if the IDDIG debounce + * filter is enabled. + */ +static bool dwc2_iddig_filter_enabled(struct dwc2_hsotg *hsotg) +{ + u32 gsnpsid; + u32 ghwcfg4; + + if (!dwc2_hw_is_otg(hsotg)) + return false; + + /* Check if core configuration includes the IDDIG filter. */ + ghwcfg4 = dwc2_readl(hsotg->regs + GHWCFG4); + if (!(ghwcfg4 & GHWCFG4_IDDIG_FILT_EN)) + return false; + + /* + * Check if the IDDIG debounce filter is bypassed. Available + * in core version >= 3.10a. + */ + gsnpsid = dwc2_readl(hsotg->regs + GSNPSID); + if (gsnpsid >= DWC2_CORE_REV_3_10a) { + u32 gotgctl = dwc2_readl(hsotg->regs + GOTGCTL); + + if (gotgctl & GOTGCTL_DBNCE_FLTR_BYPASS) + return false; + } + + return true; +} + /* * Do core a soft reset of the core. Be careful with this because it * resets all the internal state machines of the core. @@ -246,9 +317,30 @@ int dwc2_core_reset(struct dwc2_hsotg *hsotg) { u32 greset; int count = 0; + bool wait_for_host_mode = false; dev_vdbg(hsotg->dev, "%s()\n", __func__); + /* + * If the current mode is host, either due to the force mode + * bit being set (which persists after core reset) or the + * connector id pin, a core soft reset will temporarily reset + * the mode to device. A delay from the IDDIG debounce filter + * will occur before going back to host mode. + * + * Determine whether we will go back into host mode after a + * reset and account for this delay after the reset. + */ + if (dwc2_iddig_filter_enabled(hsotg)) { + u32 gotgctl = dwc2_readl(hsotg->regs + GOTGCTL); + u32 gusbcfg = dwc2_readl(hsotg->regs + GUSBCFG); + + if (!(gotgctl & GOTGCTL_CONID_B) || + (gusbcfg & GUSBCFG_FORCEHOSTMODE)) { + wait_for_host_mode = true; + } + } + /* Core Soft Reset */ greset = dwc2_readl(hsotg->regs + GRSTCTL); greset |= GRSTCTL_CSFTRST; @@ -277,6 +369,9 @@ int dwc2_core_reset(struct dwc2_hsotg *hsotg) } } while (!(greset & GRSTCTL_AHBIDLE)); + if (wait_for_host_mode) + dwc2_wait_for_mode(hsotg, true); + return 0; } @@ -300,9 +395,9 @@ int dwc2_core_reset(struct dwc2_hsotg *hsotg) * Checks are done in this function to determine whether doing a force * would be valid or not. * - * If a force is done, it requires a 25ms delay to take effect. - * - * Returns true if the mode was forced. + * If a force is done, it requires a IDDIG debounce filter delay if + * the filter is configured and enabled. We poll the current mode of + * the controller to account for this delay. */ static bool dwc2_force_mode(struct dwc2_hsotg *hsotg, bool host) { @@ -337,12 +432,18 @@ static bool dwc2_force_mode(struct dwc2_hsotg *hsotg, bool host) gusbcfg |= set; dwc2_writel(gusbcfg, hsotg->regs + GUSBCFG); - msleep(25); + dwc2_wait_for_mode(hsotg, host); return true; } -/* - * Clears the force mode bits. +/** + * dwc2_clear_force_mode() - Clears the force mode bits. + * + * After clearing the bits, wait up to 100 ms to account for any + * potential IDDIG filter delay. We can't know if we expect this delay + * or not because the value of the connector ID status is affected by + * the force mode. We only need to call this once during probe if + * dr_mode == OTG. */ static void dwc2_clear_force_mode(struct dwc2_hsotg *hsotg) { @@ -353,11 +454,8 @@ static void dwc2_clear_force_mode(struct dwc2_hsotg *hsotg) gusbcfg &= ~GUSBCFG_FORCEDEVMODE; dwc2_writel(gusbcfg, hsotg->regs + GUSBCFG); - /* - * NOTE: This long sleep is _very_ important, otherwise the core will - * not stay in host mode after a connector ID change! - */ - msleep(25); + if (dwc2_iddig_filter_enabled(hsotg)) + usleep_range(100000, 110000); } /* @@ -380,12 +478,6 @@ void dwc2_force_dr_mode(struct dwc2_hsotg *hsotg) __func__, hsotg->dr_mode); break; } - - /* - * NOTE: This is required for some rockchip soc based - * platforms. - */ - msleep(50); } /* diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h index d64551243789..aad4107ef927 100644 --- a/drivers/usb/dwc2/core.h +++ b/drivers/usb/dwc2/core.h @@ -259,13 +259,6 @@ enum dwc2_lx_state { DWC2_L3, /* Off state */ }; -/* - * Gadget periodic tx fifo sizes as used by legacy driver - * EP0 is not included - */ -#define DWC2_G_P_LEGACY_TX_FIFO_SIZE {256, 256, 256, 256, 768, 768, 768, \ - 768, 0, 0, 0, 0, 0, 0, 0} - /* Gadget ep0 states */ enum dwc2_ep0_state { DWC2_EP0_SETUP, @@ -890,6 +883,7 @@ struct dwc2_hsotg { #define DWC2_CORE_REV_2_92a 0x4f54292a #define DWC2_CORE_REV_2_94a 0x4f54294a #define DWC2_CORE_REV_3_00a 0x4f54300a +#define DWC2_CORE_REV_3_10a 0x4f54310a #if IS_ENABLED(CONFIG_USB_DWC2_HOST) || IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE) union dwc2_hcd_internal_flags { diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c index 2ff03ae08e14..4cd6403a7566 100644 --- a/drivers/usb/dwc2/gadget.c +++ b/drivers/usb/dwc2/gadget.c @@ -186,9 +186,10 @@ static void dwc2_hsotg_ctrl_epint(struct dwc2_hsotg *hsotg, */ static void dwc2_hsotg_init_fifo(struct dwc2_hsotg *hsotg) { - unsigned int ep; + unsigned int fifo; unsigned int addr; int timeout; + u32 dptxfsizn; u32 val; /* Reset fifo map if not correctly cleared during previous session */ @@ -216,16 +217,16 @@ static void dwc2_hsotg_init_fifo(struct dwc2_hsotg *hsotg) * them to endpoints dynamically according to maxpacket size value of * given endpoint. */ - for (ep = 1; ep < MAX_EPS_CHANNELS; ep++) { - if (!hsotg->g_tx_fifo_sz[ep]) - continue; - val = addr; - val |= hsotg->g_tx_fifo_sz[ep] << FIFOSIZE_DEPTH_SHIFT; - WARN_ONCE(addr + hsotg->g_tx_fifo_sz[ep] > hsotg->fifo_mem, - "insufficient fifo memory"); - addr += hsotg->g_tx_fifo_sz[ep]; + for (fifo = 1; fifo < MAX_EPS_CHANNELS; fifo++) { + dptxfsizn = dwc2_readl(hsotg->regs + DPTXFSIZN(fifo)); + + val = (dptxfsizn & FIFOSIZE_DEPTH_MASK) | addr; + addr += dptxfsizn >> FIFOSIZE_DEPTH_SHIFT; + + if (addr > hsotg->fifo_mem) + break; - dwc2_writel(val, hsotg->regs + DPTXFSIZN(ep)); + dwc2_writel(val, hsotg->regs + DPTXFSIZN(fifo)); } /* @@ -388,7 +389,8 @@ static int dwc2_hsotg_write_fifo(struct dwc2_hsotg *hsotg, return -ENOSPC; } } else if (hsotg->dedicated_fifos && hs_ep->index != 0) { - can_write = dwc2_readl(hsotg->regs + DTXFSTS(hs_ep->index)); + can_write = dwc2_readl(hsotg->regs + + DTXFSTS(hs_ep->fifo_index)); can_write &= 0xffff; can_write *= 4; @@ -2432,7 +2434,7 @@ static void kill_all_requests(struct dwc2_hsotg *hsotg, if (!hsotg->dedicated_fifos) return; - size = (dwc2_readl(hsotg->regs + DTXFSTS(ep->index)) & 0xffff) * 4; + size = (dwc2_readl(hsotg->regs + DTXFSTS(ep->fifo_index)) & 0xffff) * 4; if (size < ep->fifo_size) dwc2_hsotg_txfifo_flush(hsotg, ep->fifo_index); } @@ -3041,22 +3043,11 @@ static int dwc2_hsotg_ep_enable(struct usb_ep *ep, break; } - /* If fifo is already allocated for this ep */ - if (hs_ep->fifo_index) { - size = hs_ep->ep.maxpacket * hs_ep->mc; - /* If bigger fifo is required deallocate current one */ - if (size > hs_ep->fifo_size) { - hsotg->fifo_map &= ~(1 << hs_ep->fifo_index); - hs_ep->fifo_index = 0; - hs_ep->fifo_size = 0; - } - } - /* * if the hardware has dedicated fifos, we must give each IN EP * a unique tx-fifo even if it is non-periodic. */ - if (dir_in && hsotg->dedicated_fifos && !hs_ep->fifo_index) { + if (dir_in && hsotg->dedicated_fifos) { u32 fifo_index = 0; u32 fifo_size = UINT_MAX; size = hs_ep->ep.maxpacket*hs_ep->mc; @@ -3129,10 +3120,6 @@ static int dwc2_hsotg_ep_disable(struct usb_ep *ep) spin_lock_irqsave(&hsotg->lock, flags); - hsotg->fifo_map &= ~(1<<hs_ep->fifo_index); - hs_ep->fifo_index = 0; - hs_ep->fifo_size = 0; - ctrl = dwc2_readl(hsotg->regs + epctrl_reg); ctrl &= ~DXEPCTL_EPENA; ctrl &= ~DXEPCTL_USBACTEP; @@ -3147,6 +3134,10 @@ static int dwc2_hsotg_ep_disable(struct usb_ep *ep) /* terminate all requests with shutdown */ kill_all_requests(hsotg, hs_ep, -ESHUTDOWN); + hsotg->fifo_map &= ~(1 << hs_ep->fifo_index); + hs_ep->fifo_index = 0; + hs_ep->fifo_size = 0; + spin_unlock_irqrestore(&hsotg->lock, flags); return 0; } @@ -3475,8 +3466,11 @@ static int dwc2_hsotg_udc_start(struct usb_gadget *gadget, otg_set_peripheral(hsotg->uphy->otg, &hsotg->gadget); spin_lock_irqsave(&hsotg->lock, flags); - dwc2_hsotg_init(hsotg); - dwc2_hsotg_core_init_disconnected(hsotg, false); + if (dwc2_hw_is_device(hsotg)) { + dwc2_hsotg_init(hsotg); + dwc2_hsotg_core_init_disconnected(hsotg, false); + } + hsotg->enabled = 0; spin_unlock_irqrestore(&hsotg->lock, flags); @@ -3813,36 +3807,10 @@ static void dwc2_hsotg_dump(struct dwc2_hsotg *hsotg) static void dwc2_hsotg_of_probe(struct dwc2_hsotg *hsotg) { struct device_node *np = hsotg->dev->of_node; - u32 len = 0; - u32 i = 0; /* Enable dma if requested in device tree */ hsotg->g_using_dma = of_property_read_bool(np, "g-use-dma"); - /* - * Register TX periodic fifo size per endpoint. - * EP0 is excluded since it has no fifo configuration. - */ - if (!of_find_property(np, "g-tx-fifo-size", &len)) - goto rx_fifo; - - len /= sizeof(u32); - - /* Read tx fifo sizes other than ep0 */ - if (of_property_read_u32_array(np, "g-tx-fifo-size", - &hsotg->g_tx_fifo_sz[1], len)) - goto rx_fifo; - - /* Add ep0 */ - len++; - - /* Make remaining TX fifos unavailable */ - if (len < MAX_EPS_CHANNELS) { - for (i = len; i < MAX_EPS_CHANNELS; i++) - hsotg->g_tx_fifo_sz[i] = 0; - } - -rx_fifo: /* Register RX fifo size */ of_property_read_u32(np, "g-rx-fifo-size", &hsotg->g_rx_fifo_sz); @@ -3864,13 +3832,10 @@ int dwc2_gadget_init(struct dwc2_hsotg *hsotg, int irq) struct device *dev = hsotg->dev; int epnum; int ret; - int i; - u32 p_tx_fifo[] = DWC2_G_P_LEGACY_TX_FIFO_SIZE; /* Initialize to legacy fifo configuration values */ hsotg->g_rx_fifo_sz = 2048; hsotg->g_np_g_tx_fifo_sz = 1024; - memcpy(&hsotg->g_tx_fifo_sz[1], p_tx_fifo, sizeof(p_tx_fifo)); /* Device tree specific probe */ dwc2_hsotg_of_probe(hsotg); @@ -3888,9 +3853,6 @@ int dwc2_gadget_init(struct dwc2_hsotg *hsotg, int irq) dev_dbg(dev, "NonPeriodic TXFIFO size: %d\n", hsotg->g_np_g_tx_fifo_sz); dev_dbg(dev, "RXFIFO size: %d\n", hsotg->g_rx_fifo_sz); - for (i = 0; i < MAX_EPS_CHANNELS; i++) - dev_dbg(dev, "Periodic TXFIFO%2d size: %d\n", i, - hsotg->g_tx_fifo_sz[i]); hsotg->gadget.max_speed = USB_SPEED_HIGH; hsotg->gadget.ops = &dwc2_hsotg_gadget_ops; diff --git a/drivers/usb/dwc2/hw.h b/drivers/usb/dwc2/hw.h index efc3bcde2822..91058441e62a 100644 --- a/drivers/usb/dwc2/hw.h +++ b/drivers/usb/dwc2/hw.h @@ -48,6 +48,7 @@ #define GOTGCTL_ASESVLD (1 << 18) #define GOTGCTL_DBNC_SHORT (1 << 17) #define GOTGCTL_CONID_B (1 << 16) +#define GOTGCTL_DBNCE_FLTR_BYPASS (1 << 15) #define GOTGCTL_DEVHNPEN (1 << 11) #define GOTGCTL_HSTSETHNPEN (1 << 10) #define GOTGCTL_HNPREQ (1 << 9) diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 35d092456bec..7287a763cd0c 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -49,6 +49,57 @@ #define DWC3_DEFAULT_AUTOSUSPEND_DELAY 5000 /* ms */ +/** + * dwc3_get_dr_mode - Validates and sets dr_mode + * @dwc: pointer to our context structure + */ +static int dwc3_get_dr_mode(struct dwc3 *dwc) +{ + enum usb_dr_mode mode; + struct device *dev = dwc->dev; + unsigned int hw_mode; + + if (dwc->dr_mode == USB_DR_MODE_UNKNOWN) + dwc->dr_mode = USB_DR_MODE_OTG; + + mode = dwc->dr_mode; + hw_mode = DWC3_GHWPARAMS0_MODE(dwc->hwparams.hwparams0); + + switch (hw_mode) { + case DWC3_GHWPARAMS0_MODE_GADGET: + if (IS_ENABLED(CONFIG_USB_DWC3_HOST)) { + dev_err(dev, + "Controller does not support host mode.\n"); + return -EINVAL; + } + mode = USB_DR_MODE_PERIPHERAL; + break; + case DWC3_GHWPARAMS0_MODE_HOST: + if (IS_ENABLED(CONFIG_USB_DWC3_GADGET)) { + dev_err(dev, + "Controller does not support device mode.\n"); + return -EINVAL; + } + mode = USB_DR_MODE_HOST; + break; + default: + if (IS_ENABLED(CONFIG_USB_DWC3_HOST)) + mode = USB_DR_MODE_HOST; + else if (IS_ENABLED(CONFIG_USB_DWC3_GADGET)) + mode = USB_DR_MODE_PERIPHERAL; + } + + if (mode != dwc->dr_mode) { + dev_warn(dev, + "Configuration mismatch. dr_mode forced to %s\n", + mode == USB_DR_MODE_HOST ? "host" : "gadget"); + + dwc->dr_mode = mode; + } + + return 0; +} + void dwc3_set_mode(struct dwc3 *dwc, u32 mode) { u32 reg; @@ -448,6 +499,9 @@ static int dwc3_phy_setup(struct dwc3 *dwc) if (dwc->dis_u3_susphy_quirk) reg &= ~DWC3_GUSB3PIPECTL_SUSPHY; + if (dwc->dis_del_phy_power_chg_quirk) + reg &= ~DWC3_GUSB3PIPECTL_DEPOCHANGE; + dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg); reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); @@ -485,6 +539,23 @@ static int dwc3_phy_setup(struct dwc3 *dwc) break; } + switch (dwc->hsphy_mode) { + case USBPHY_INTERFACE_MODE_UTMI: + reg &= ~(DWC3_GUSB2PHYCFG_PHYIF_MASK | + DWC3_GUSB2PHYCFG_USBTRDTIM_MASK); + reg |= DWC3_GUSB2PHYCFG_PHYIF(UTMI_PHYIF_8_BIT) | + DWC3_GUSB2PHYCFG_USBTRDTIM(USBTRDTIM_UTMI_8_BIT); + break; + case USBPHY_INTERFACE_MODE_UTMIW: + reg &= ~(DWC3_GUSB2PHYCFG_PHYIF_MASK | + DWC3_GUSB2PHYCFG_USBTRDTIM_MASK); + reg |= DWC3_GUSB2PHYCFG_PHYIF(UTMI_PHYIF_16_BIT) | + DWC3_GUSB2PHYCFG_USBTRDTIM(USBTRDTIM_UTMI_16_BIT); + break; + default: + break; + } + /* * Above 1.94a, it is recommended to set DWC3_GUSB2PHYCFG_SUSPHY to * '0' during coreConsultant configuration. So default value will @@ -500,6 +571,9 @@ static int dwc3_phy_setup(struct dwc3 *dwc) if (dwc->dis_enblslpm_quirk) reg &= ~DWC3_GUSB2PHYCFG_ENBLSLPM; + if (dwc->dis_u2_freeclk_exists_quirk) + reg &= ~DWC3_GUSB2PHYCFG_U2_FREECLK_EXISTS; + dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); return 0; @@ -666,6 +740,32 @@ static int dwc3_core_init(struct dwc3 *dwc) goto err4; } + switch (dwc->dr_mode) { + case USB_DR_MODE_PERIPHERAL: + dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_DEVICE); + break; + case USB_DR_MODE_HOST: + dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_HOST); + break; + case USB_DR_MODE_OTG: + dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_OTG); + break; + default: + dev_warn(dwc->dev, "Unsupported mode %d\n", dwc->dr_mode); + break; + } + + /* + * ENDXFER polling is available on version 3.10a and later of + * the DWC_usb3 controller. It is NOT available in the + * DWC_usb31 controller. + */ + if (!dwc3_is_usb31(dwc) && dwc->revision >= DWC3_REVISION_310A) { + reg = dwc3_readl(dwc->regs, DWC3_GUCTL2); + reg |= DWC3_GUCTL2_RST_ACTBITLATER; + dwc3_writel(dwc->regs, DWC3_GUCTL2, reg); + } + return 0; err4: @@ -763,7 +863,6 @@ static int dwc3_core_init_mode(struct dwc3 *dwc) switch (dwc->dr_mode) { case USB_DR_MODE_PERIPHERAL: - dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_DEVICE); ret = dwc3_gadget_init(dwc); if (ret) { if (ret != -EPROBE_DEFER) @@ -772,7 +871,6 @@ static int dwc3_core_init_mode(struct dwc3 *dwc) } break; case USB_DR_MODE_HOST: - dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_HOST); ret = dwc3_host_init(dwc); if (ret) { if (ret != -EPROBE_DEFER) @@ -781,7 +879,6 @@ static int dwc3_core_init_mode(struct dwc3 *dwc) } break; case USB_DR_MODE_OTG: - dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_OTG); ret = dwc3_host_init(dwc); if (ret) { if (ret != -EPROBE_DEFER) @@ -888,6 +985,7 @@ static int dwc3_probe(struct platform_device *pdev) dwc->maximum_speed = usb_get_maximum_speed(dev); dwc->dr_mode = usb_get_dr_mode(dev); + dwc->hsphy_mode = of_usb_get_phy_mode(dev->of_node); dwc->has_lpm_erratum = device_property_read_bool(dev, "snps,has-lpm-erratum"); @@ -924,6 +1022,10 @@ static int dwc3_probe(struct platform_device *pdev) "snps,dis_enblslpm_quirk"); dwc->dis_rxdet_inp3_quirk = device_property_read_bool(dev, "snps,dis_rxdet_inp3_quirk"); + dwc->dis_u2_freeclk_exists_quirk = device_property_read_bool(dev, + "snps,dis-u2-freeclk-exists-quirk"); + dwc->dis_del_phy_power_chg_quirk = device_property_read_bool(dev, + "snps,dis-del-phy-power-chg-quirk"); dwc->tx_de_emphasis_quirk = device_property_read_bool(dev, "snps,tx_de_emphasis_quirk"); @@ -972,17 +1074,9 @@ static int dwc3_probe(struct platform_device *pdev) goto err2; } - if (IS_ENABLED(CONFIG_USB_DWC3_HOST) && - (dwc->dr_mode == USB_DR_MODE_OTG || - dwc->dr_mode == USB_DR_MODE_UNKNOWN)) - dwc->dr_mode = USB_DR_MODE_HOST; - else if (IS_ENABLED(CONFIG_USB_DWC3_GADGET) && - (dwc->dr_mode == USB_DR_MODE_OTG || - dwc->dr_mode == USB_DR_MODE_UNKNOWN)) - dwc->dr_mode = USB_DR_MODE_PERIPHERAL; - - if (dwc->dr_mode == USB_DR_MODE_UNKNOWN) - dwc->dr_mode = USB_DR_MODE_OTG; + ret = dwc3_get_dr_mode(dwc); + if (ret) + goto err3; ret = dwc3_alloc_scratch_buffers(dwc); if (ret) diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index 45d6de5107c7..6b60e42626a2 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -109,6 +109,7 @@ #define DWC3_GPRTBIMAP_HS1 0xc184 #define DWC3_GPRTBIMAP_FS0 0xc188 #define DWC3_GPRTBIMAP_FS1 0xc18c +#define DWC3_GUCTL2 0xc19c #define DWC3_VER_NUMBER 0xc1a0 #define DWC3_VER_TYPE 0xc1a4 @@ -199,9 +200,18 @@ /* Global USB2 PHY Configuration Register */ #define DWC3_GUSB2PHYCFG_PHYSOFTRST (1 << 31) +#define DWC3_GUSB2PHYCFG_U2_FREECLK_EXISTS (1 << 30) #define DWC3_GUSB2PHYCFG_SUSPHY (1 << 6) #define DWC3_GUSB2PHYCFG_ULPI_UTMI (1 << 4) #define DWC3_GUSB2PHYCFG_ENBLSLPM (1 << 8) +#define DWC3_GUSB2PHYCFG_PHYIF(n) (n << 3) +#define DWC3_GUSB2PHYCFG_PHYIF_MASK DWC3_GUSB2PHYCFG_PHYIF(1) +#define DWC3_GUSB2PHYCFG_USBTRDTIM(n) (n << 10) +#define DWC3_GUSB2PHYCFG_USBTRDTIM_MASK DWC3_GUSB2PHYCFG_USBTRDTIM(0xf) +#define USBTRDTIM_UTMI_8_BIT 9 +#define USBTRDTIM_UTMI_16_BIT 5 +#define UTMI_PHYIF_16_BIT 1 +#define UTMI_PHYIF_8_BIT 0 /* Global USB2 PHY Vendor Control Register */ #define DWC3_GUSB2PHYACC_NEWREGREQ (1 << 25) @@ -235,7 +245,10 @@ #define DWC3_GEVNTSIZ_SIZE(n) ((n) & 0xffff) /* Global HWPARAMS0 Register */ -#define DWC3_GHWPARAMS0_USB3_MODE(n) ((n) & 0x3) +#define DWC3_GHWPARAMS0_MODE(n) ((n) & 0x3) +#define DWC3_GHWPARAMS0_MODE_GADGET 0 +#define DWC3_GHWPARAMS0_MODE_HOST 1 +#define DWC3_GHWPARAMS0_MODE_DRD 2 #define DWC3_GHWPARAMS0_MBUS_TYPE(n) (((n) >> 3) & 0x7) #define DWC3_GHWPARAMS0_SBUS_TYPE(n) (((n) >> 6) & 0x3) #define DWC3_GHWPARAMS0_MDWIDTH(n) (((n) >> 8) & 0xff) @@ -279,6 +292,9 @@ #define DWC3_GFLADJ_30MHZ_SDBND_SEL (1 << 7) #define DWC3_GFLADJ_30MHZ_MASK 0x3f +/* Global User Control Register 2 */ +#define DWC3_GUCTL2_RST_ACTBITLATER (1 << 14) + /* Device Configuration Register */ #define DWC3_DCFG_DEVADDR(addr) ((addr) << 3) #define DWC3_DCFG_DEVADDR_MASK DWC3_DCFG_DEVADDR(0x7f) @@ -685,6 +701,8 @@ struct dwc3_hwparams { * @request: struct usb_request to be transferred * @list: a list_head used for request queueing * @dep: struct dwc3_ep owning this request + * @sg: pointer to first incomplete sg + * @num_pending_sgs: counter to pending sgs * @first_trb_index: index to first trb used by this request * @epnum: endpoint number to which this request refers * @trb: pointer to struct dwc3_trb @@ -697,7 +715,9 @@ struct dwc3_request { struct usb_request request; struct list_head list; struct dwc3_ep *dep; + struct scatterlist *sg; + unsigned num_pending_sgs; u8 first_trb_index; u8 epnum; struct dwc3_trb *trb; @@ -743,6 +763,9 @@ struct dwc3_scratchpad_array { * @maximum_speed: maximum speed requested (mainly for testing purposes) * @revision: revision register contents * @dr_mode: requested mode of operation + * @hsphy_mode: UTMI phy mode, one of following: + * - USBPHY_INTERFACE_MODE_UTMI + * - USBPHY_INTERFACE_MODE_UTMIW * @usb2_phy: pointer to USB2 PHY * @usb3_phy: pointer to USB3 PHY * @usb2_generic_phy: pointer to USB2 PHY @@ -799,6 +822,11 @@ struct dwc3_scratchpad_array { * @dis_u2_susphy_quirk: set if we disable usb2 suspend phy * @dis_enblslpm_quirk: set if we clear enblslpm in GUSB2PHYCFG, * disabling the suspend signal to the PHY. + * @dis_u2_freeclk_exists_quirk : set if we clear u2_freeclk_exists + * in GUSB2PHYCFG, specify that USB2 PHY doesn't + * provide a free-running PHY clock. + * @dis_del_phy_power_chg_quirk: set if we disable delay phy power + * change quirk. * @tx_de_emphasis_quirk: set if we enable Tx de-emphasis quirk * @tx_de_emphasis: Tx de-emphasis value * 0 - -6dB de-emphasis @@ -845,6 +873,7 @@ struct dwc3 { size_t regs_size; enum usb_dr_mode dr_mode; + enum usb_phy_interface hsphy_mode; u32 fladj; u32 irq_gadget; @@ -880,6 +909,8 @@ struct dwc3 { #define DWC3_REVISION_260A 0x5533260a #define DWC3_REVISION_270A 0x5533270a #define DWC3_REVISION_280A 0x5533280a +#define DWC3_REVISION_300A 0x5533300a +#define DWC3_REVISION_310A 0x5533310a /* * NOTICE: we're using bit 31 as a "is usb 3.1" flag. This is really @@ -942,6 +973,8 @@ struct dwc3 { unsigned dis_u2_susphy_quirk:1; unsigned dis_enblslpm_quirk:1; unsigned dis_rxdet_inp3_quirk:1; + unsigned dis_u2_freeclk_exists_quirk:1; + unsigned dis_del_phy_power_chg_quirk:1; unsigned tx_de_emphasis_quirk:1; unsigned tx_de_emphasis:2; diff --git a/drivers/usb/dwc3/dwc3-of-simple.c b/drivers/usb/dwc3/dwc3-of-simple.c index e56d59b19a0e..fe414e7a9c78 100644 --- a/drivers/usb/dwc3/dwc3-of-simple.c +++ b/drivers/usb/dwc3/dwc3-of-simple.c @@ -36,36 +36,25 @@ struct dwc3_of_simple { int num_clocks; }; -static int dwc3_of_simple_probe(struct platform_device *pdev) +static int dwc3_of_simple_clk_init(struct dwc3_of_simple *simple, int count) { - struct dwc3_of_simple *simple; - struct device *dev = &pdev->dev; + struct device *dev = simple->dev; struct device_node *np = dev->of_node; - - unsigned int count; - int ret; int i; - simple = devm_kzalloc(dev, sizeof(*simple), GFP_KERNEL); - if (!simple) - return -ENOMEM; + simple->num_clocks = count; - count = of_clk_get_parent_count(np); if (!count) - return -ENOENT; - - simple->num_clocks = count; + return 0; simple->clks = devm_kcalloc(dev, simple->num_clocks, sizeof(struct clk *), GFP_KERNEL); if (!simple->clks) return -ENOMEM; - platform_set_drvdata(pdev, simple); - simple->dev = dev; - for (i = 0; i < simple->num_clocks; i++) { struct clk *clk; + int ret; clk = of_clk_get(np, i); if (IS_ERR(clk)) { @@ -88,6 +77,29 @@ static int dwc3_of_simple_probe(struct platform_device *pdev) simple->clks[i] = clk; } + return 0; +} + +static int dwc3_of_simple_probe(struct platform_device *pdev) +{ + struct dwc3_of_simple *simple; + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + + int ret; + int i; + + simple = devm_kzalloc(dev, sizeof(*simple), GFP_KERNEL); + if (!simple) + return -ENOMEM; + + platform_set_drvdata(pdev, simple); + simple->dev = dev; + + ret = dwc3_of_simple_clk_init(simple, of_clk_get_parent_count(np)); + if (ret) + return ret; + ret = of_platform_populate(np, NULL, NULL, dev); if (ret) { for (i = 0; i < simple->num_clocks; i++) { @@ -112,7 +124,7 @@ static int dwc3_of_simple_remove(struct platform_device *pdev) int i; for (i = 0; i < simple->num_clocks; i++) { - clk_unprepare(simple->clks[i]); + clk_disable_unprepare(simple->clks[i]); clk_put(simple->clks[i]); } @@ -162,7 +174,9 @@ static const struct dev_pm_ops dwc3_of_simple_dev_pm_ops = { static const struct of_device_id of_dwc3_simple_match[] = { { .compatible = "qcom,dwc3" }, + { .compatible = "rockchip,rk3399-dwc3" }, { .compatible = "xlnx,zynqmp-dwc3" }, + { .compatible = "cavium,octeon-7130-usb-uctl" }, { /* Sentinel */ } }; MODULE_DEVICE_TABLE(of, of_dwc3_simple_match); diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 122e64df2f4d..07cc8929f271 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -174,15 +174,8 @@ void dwc3_gadget_giveback(struct dwc3_ep *dep, struct dwc3_request *req, int status) { struct dwc3 *dwc = dep->dwc; - int i; - if (req->started) { - i = 0; - do { - dwc3_ep_inc_deq(dep); - } while(++i < req->request.num_mapped_sgs); - req->started = false; - } + req->started = false; list_del(&req->list); req->trb = NULL; @@ -348,7 +341,8 @@ static int dwc3_send_clear_stall_ep_cmd(struct dwc3_ep *dep) * IN transfers due to a mishandled error condition. Synopsys * STAR 9000614252. */ - if (dep->direction && (dwc->revision >= DWC3_REVISION_260A)) + if (dep->direction && (dwc->revision >= DWC3_REVISION_260A) && + (dwc->gadget.speed >= USB_SPEED_SUPER)) cmd |= DWC3_DEPCMD_CLEARPENDIN; memset(¶ms, 0, sizeof(params)); @@ -490,7 +484,8 @@ static int dwc3_gadget_set_ep_config(struct dwc3 *dwc, struct dwc3_ep *dep, params.param0 |= DWC3_DEPCFG_ACTION_INIT; } - params.param1 = DWC3_DEPCFG_XFER_COMPLETE_EN; + if (usb_endpoint_xfer_control(desc)) + params.param1 = DWC3_DEPCFG_XFER_COMPLETE_EN; if (dep->number <= 1 || usb_endpoint_xfer_isoc(desc)) params.param1 |= DWC3_DEPCFG_XFER_NOT_READY_EN; @@ -764,6 +759,8 @@ static void dwc3_gadget_ep_free_request(struct usb_ep *ep, kfree(req); } +static u32 dwc3_calc_trbs_left(struct dwc3_ep *dep); + /** * dwc3_prepare_one_trb - setup one TRB from one request * @dep: endpoint for which this request is prepared @@ -771,15 +768,13 @@ static void dwc3_gadget_ep_free_request(struct usb_ep *ep, */ static void dwc3_prepare_one_trb(struct dwc3_ep *dep, struct dwc3_request *req, dma_addr_t dma, - unsigned length, unsigned last, unsigned chain, unsigned node) + unsigned length, unsigned chain, unsigned node) { struct dwc3_trb *trb; - dwc3_trace(trace_dwc3_gadget, "%s: req %p dma %08llx length %d%s%s", + dwc3_trace(trace_dwc3_gadget, "%s: req %p dma %08llx length %d%s", dep->name, req, (unsigned long long) dma, - length, last ? " last" : "", - chain ? " chain" : ""); - + length, chain ? " chain" : ""); trb = &dep->trb_pool[dep->trb_enqueue]; @@ -826,12 +821,10 @@ static void dwc3_prepare_one_trb(struct dwc3_ep *dep, /* always enable Continue on Short Packet */ trb->ctrl |= DWC3_TRB_CTRL_CSP; - if (!req->request.no_interrupt && !chain) + if ((!req->request.no_interrupt && !chain) || + (dwc3_calc_trbs_left(dep) == 0)) trb->ctrl |= DWC3_TRB_CTRL_IOC | DWC3_TRB_CTRL_ISP_IMI; - if (last && !usb_endpoint_xfer_isoc(dep->endpoint.desc)) - trb->ctrl |= DWC3_TRB_CTRL_LST; - if (chain) trb->ctrl |= DWC3_TRB_CTRL_CHN; @@ -856,12 +849,12 @@ static void dwc3_prepare_one_trb(struct dwc3_ep *dep, */ static struct dwc3_trb *dwc3_ep_prev_trb(struct dwc3_ep *dep, u8 index) { - if (!index) - index = DWC3_TRB_NUM - 2; - else - index = dep->trb_enqueue - 1; + u8 tmp = index; - return &dep->trb_pool[index]; + if (!tmp) + tmp = DWC3_TRB_NUM - 1; + + return &dep->trb_pool[tmp - 1]; } static u32 dwc3_calc_trbs_left(struct dwc3_ep *dep) @@ -894,65 +887,42 @@ static u32 dwc3_calc_trbs_left(struct dwc3_ep *dep) } static void dwc3_prepare_one_trb_sg(struct dwc3_ep *dep, - struct dwc3_request *req, unsigned int trbs_left, - unsigned int more_coming) + struct dwc3_request *req) { - struct usb_request *request = &req->request; - struct scatterlist *sg = request->sg; + struct scatterlist *sg = req->sg; struct scatterlist *s; - unsigned int last = false; unsigned int length; dma_addr_t dma; int i; - for_each_sg(sg, s, request->num_mapped_sgs, i) { + for_each_sg(sg, s, req->num_pending_sgs, i) { unsigned chain = true; length = sg_dma_len(s); dma = sg_dma_address(s); - if (sg_is_last(s)) { - if (usb_endpoint_xfer_int(dep->endpoint.desc) || - !more_coming) - last = true; - - chain = false; - } - - if (!trbs_left--) - last = true; - - if (last) + if (sg_is_last(s)) chain = false; dwc3_prepare_one_trb(dep, req, dma, length, - last, chain, i); + chain, i); - if (last) + if (!dwc3_calc_trbs_left(dep)) break; } } static void dwc3_prepare_one_trb_linear(struct dwc3_ep *dep, - struct dwc3_request *req, unsigned int trbs_left, - unsigned int more_coming) + struct dwc3_request *req) { - unsigned int last = false; unsigned int length; dma_addr_t dma; dma = req->request.dma; length = req->request.length; - if (!trbs_left) - last = true; - - /* Is this the last request? */ - if (usb_endpoint_xfer_int(dep->endpoint.desc) || !more_coming) - last = true; - dwc3_prepare_one_trb(dep, req, dma, length, - last, false, 0); + false, 0); } /* @@ -966,26 +936,19 @@ static void dwc3_prepare_one_trb_linear(struct dwc3_ep *dep, static void dwc3_prepare_trbs(struct dwc3_ep *dep) { struct dwc3_request *req, *n; - unsigned int more_coming; - u32 trbs_left; BUILD_BUG_ON_NOT_POWER_OF_2(DWC3_TRB_NUM); - trbs_left = dwc3_calc_trbs_left(dep); - if (!trbs_left) + if (!dwc3_calc_trbs_left(dep)) return; - more_coming = dep->allocated_requests - dep->queued_requests; - list_for_each_entry_safe(req, n, &dep->pending_list, list) { - if (req->request.num_mapped_sgs > 0) - dwc3_prepare_one_trb_sg(dep, req, trbs_left--, - more_coming); + if (req->num_pending_sgs > 0) + dwc3_prepare_one_trb_sg(dep, req); else - dwc3_prepare_one_trb_linear(dep, req, trbs_left--, - more_coming); + dwc3_prepare_one_trb_linear(dep, req); - if (!trbs_left) + if (!dwc3_calc_trbs_left(dep)) return; } } @@ -1101,93 +1064,29 @@ static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req) trace_dwc3_ep_queue(req); - /* - * We only add to our list of requests now and - * start consuming the list once we get XferNotReady - * IRQ. - * - * That way, we avoid doing anything that we don't need - * to do now and defer it until the point we receive a - * particular token from the Host side. - * - * This will also avoid Host cancelling URBs due to too - * many NAKs. - */ ret = usb_gadget_map_request(&dwc->gadget, &req->request, dep->direction); if (ret) return ret; - list_add_tail(&req->list, &dep->pending_list); - - /* - * If there are no pending requests and the endpoint isn't already - * busy, we will just start the request straight away. - * - * This will save one IRQ (XFER_NOT_READY) and possibly make it a - * little bit faster. - */ - if (!usb_endpoint_xfer_isoc(dep->endpoint.desc) && - !usb_endpoint_xfer_int(dep->endpoint.desc)) { - ret = __dwc3_gadget_kick_transfer(dep, 0); - goto out; - } - - /* - * There are a few special cases: - * - * 1. XferNotReady with empty list of requests. We need to kick the - * transfer here in that situation, otherwise we will be NAKing - * forever. If we get XferNotReady before gadget driver has a - * chance to queue a request, we will ACK the IRQ but won't be - * able to receive the data until the next request is queued. - * The following code is handling exactly that. - * - */ - if (dep->flags & DWC3_EP_PENDING_REQUEST) { - /* - * If xfernotready is already elapsed and it is a case - * of isoc transfer, then issue END TRANSFER, so that - * you can receive xfernotready again and can have - * notion of current microframe. - */ - if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) { - if (list_empty(&dep->started_list)) { - dwc3_stop_active_transfer(dwc, dep->number, true); - dep->flags = DWC3_EP_ENABLED; - } - return 0; - } - - ret = __dwc3_gadget_kick_transfer(dep, 0); - if (!ret) - dep->flags &= ~DWC3_EP_PENDING_REQUEST; + req->sg = req->request.sg; + req->num_pending_sgs = req->request.num_mapped_sgs; - goto out; - } + list_add_tail(&req->list, &dep->pending_list); - /* - * 2. XferInProgress on Isoc EP with an active transfer. We need to - * kick the transfer here after queuing a request, otherwise the - * core may not see the modified TRB(s). - */ if (usb_endpoint_xfer_isoc(dep->endpoint.desc) && - (dep->flags & DWC3_EP_BUSY) && - !(dep->flags & DWC3_EP_MISSED_ISOC)) { - WARN_ON_ONCE(!dep->resource_index); - ret = __dwc3_gadget_kick_transfer(dep, dep->resource_index); - goto out; + dep->flags & DWC3_EP_PENDING_REQUEST) { + if (list_empty(&dep->started_list)) { + dwc3_stop_active_transfer(dwc, dep->number, true); + dep->flags = DWC3_EP_ENABLED; + } + return 0; } - /* - * 4. Stream Capable Bulk Endpoints. We need to start the transfer - * right away, otherwise host will not know we have streams to be - * handled. - */ - if (dep->stream_capable) - ret = __dwc3_gadget_kick_transfer(dep, 0); + if (!dwc3_calc_trbs_left(dep)) + return 0; -out: + ret = __dwc3_gadget_kick_transfer(dep, 0); if (ret && ret != -EBUSY) dwc3_trace(trace_dwc3_gadget, "%s: failed to kick transfers", @@ -1963,6 +1862,7 @@ static int __dwc3_cleanup_done_trbs(struct dwc3 *dwc, struct dwc3_ep *dep, unsigned int trb_status; dep->queued_requests--; + dwc3_ep_inc_deq(dep); trace_dwc3_complete_trb(dep, trb); /* @@ -1982,6 +1882,7 @@ static int __dwc3_cleanup_done_trbs(struct dwc3 *dwc, struct dwc3_ep *dep, return 1; count = trb->size & DWC3_TRB_SIZE_MASK; + req->request.actual += count; if (dep->direction) { if (count) { @@ -2021,48 +1922,51 @@ static int __dwc3_cleanup_done_trbs(struct dwc3 *dwc, struct dwc3_ep *dep, if (s_pkt && !chain) return 1; - if ((event->status & DEPEVT_STATUS_LST) && - (trb->ctrl & (DWC3_TRB_CTRL_LST | - DWC3_TRB_CTRL_HWO))) - return 1; + if ((event->status & DEPEVT_STATUS_IOC) && (trb->ctrl & DWC3_TRB_CTRL_IOC)) return 1; + return 0; } static int dwc3_cleanup_done_reqs(struct dwc3 *dwc, struct dwc3_ep *dep, const struct dwc3_event_depevt *event, int status) { - struct dwc3_request *req; + struct dwc3_request *req, *n; struct dwc3_trb *trb; - unsigned int slot; - unsigned int i; - int count = 0; + bool ioc = false; int ret; - do { + list_for_each_entry_safe(req, n, &dep->started_list, list) { + unsigned length; + unsigned actual; int chain; - req = next_request(&dep->started_list); - if (WARN_ON_ONCE(!req)) - return 1; - - chain = req->request.num_mapped_sgs > 0; - i = 0; - do { - slot = req->first_trb_index + i; - if (slot == DWC3_TRB_NUM - 1) - slot++; - slot %= DWC3_TRB_NUM; - trb = &dep->trb_pool[slot]; - count += trb->size & DWC3_TRB_SIZE_MASK; + length = req->request.length; + chain = req->num_pending_sgs > 0; + if (chain) { + struct scatterlist *sg = req->sg; + struct scatterlist *s; + unsigned int pending = req->num_pending_sgs; + unsigned int i; + for_each_sg(sg, s, pending, i) { + trb = &dep->trb_pool[dep->trb_dequeue]; + + req->sg = sg_next(s); + req->num_pending_sgs--; + + ret = __dwc3_cleanup_done_trbs(dwc, dep, req, trb, + event, status, chain); + if (ret) + break; + } + } else { + trb = &dep->trb_pool[dep->trb_dequeue]; ret = __dwc3_cleanup_done_trbs(dwc, dep, req, trb, event, status, chain); - if (ret) - break; - } while (++i < req->request.num_mapped_sgs); + } /* * We assume here we will always receive the entire data block @@ -2071,12 +1975,21 @@ static int dwc3_cleanup_done_reqs(struct dwc3 *dwc, struct dwc3_ep *dep, * should receive and we simply bounce the request back to the * gadget driver for further processing. */ - req->request.actual += req->request.length - count; + actual = length - req->request.actual; + req->request.actual = actual; + + if (ret && chain && (actual < length) && req->num_pending_sgs) + return __dwc3_gadget_kick_transfer(dep, 0); + dwc3_gadget_giveback(dep, req, status); - if (ret) + if (ret) { + if ((event->status & DEPEVT_STATUS_IOC) && + (trb->ctrl & DWC3_TRB_CTRL_IOC)) + ioc = true; break; - } while (1); + } + } /* * Our endpoint might get disabled by another thread during @@ -2103,10 +2016,9 @@ static int dwc3_cleanup_done_reqs(struct dwc3 *dwc, struct dwc3_ep *dep, return 1; } - if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) - if ((event->status & DEPEVT_STATUS_IOC) && - (trb->ctrl & DWC3_TRB_CTRL_IOC)) - return 0; + if (usb_endpoint_xfer_isoc(dep->endpoint.desc) && ioc) + return 0; + return 1; } @@ -2322,6 +2234,18 @@ static void dwc3_stop_active_transfer(struct dwc3 *dwc, u32 epnum, bool force) * * - Issue EndTransfer WITH CMDIOC bit set * - Wait 100us + * + * As of IP version 3.10a of the DWC_usb3 IP, the controller + * supports a mode to work around the above limitation. The + * software can poll the CMDACT bit in the DEPCMD register + * after issuing a EndTransfer command. This mode is enabled + * by writing GUCTL2[14]. This polling is already done in the + * dwc3_send_gadget_ep_cmd() function so if the mode is + * enabled, the EndTransfer command will have completed upon + * returning from this function and we don't need to delay for + * 100us. + * + * This mode is NOT available on the DWC_usb31 IP. */ cmd = DWC3_DEPCMD_ENDTRANSFER; @@ -2333,7 +2257,9 @@ static void dwc3_stop_active_transfer(struct dwc3 *dwc, u32 epnum, bool force) WARN_ON_ONCE(ret); dep->resource_index = 0; dep->flags &= ~DWC3_EP_BUSY; - udelay(100); + + if (dwc3_is_usb31(dwc) || dwc->revision < DWC3_REVISION_310A) + udelay(100); } static void dwc3_stop_active_transfers(struct dwc3 *dwc) diff --git a/drivers/usb/dwc3/ulpi.c b/drivers/usb/dwc3/ulpi.c index ec004c6d76f2..bd86f84f3790 100644 --- a/drivers/usb/dwc3/ulpi.c +++ b/drivers/usb/dwc3/ulpi.c @@ -35,9 +35,9 @@ static int dwc3_ulpi_busyloop(struct dwc3 *dwc) return -ETIMEDOUT; } -static int dwc3_ulpi_read(struct ulpi_ops *ops, u8 addr) +static int dwc3_ulpi_read(struct device *dev, u8 addr) { - struct dwc3 *dwc = dev_get_drvdata(ops->dev); + struct dwc3 *dwc = dev_get_drvdata(dev); u32 reg; int ret; @@ -53,9 +53,9 @@ static int dwc3_ulpi_read(struct ulpi_ops *ops, u8 addr) return DWC3_GUSB2PHYACC_DATA(reg); } -static int dwc3_ulpi_write(struct ulpi_ops *ops, u8 addr, u8 val) +static int dwc3_ulpi_write(struct device *dev, u8 addr, u8 val) { - struct dwc3 *dwc = dev_get_drvdata(ops->dev); + struct dwc3 *dwc = dev_get_drvdata(dev); u32 reg; reg = DWC3_GUSB2PHYACC_NEWREGREQ | DWC3_ULPI_ADDR(addr); @@ -65,7 +65,7 @@ static int dwc3_ulpi_write(struct ulpi_ops *ops, u8 addr, u8 val) return dwc3_ulpi_busyloop(dwc); } -static struct ulpi_ops dwc3_ulpi_ops = { +static const struct ulpi_ops dwc3_ulpi_ops = { .read = dwc3_ulpi_read, .write = dwc3_ulpi_write, }; diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index 3c3f31ceece7..8ad203296079 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -209,25 +209,6 @@ config USB_F_PRINTER config USB_F_TCM tristate -choice - tristate "USB Gadget Drivers" - default USB_ETH - help - A Linux "Gadget Driver" talks to the USB Peripheral Controller - driver through the abstract "gadget" API. Some other operating - systems call these "client" drivers, of which "class drivers" - are a subset (implementing a USB device class specification). - A gadget driver implements one or more USB functions using - the peripheral hardware. - - Gadget drivers are hardware-neutral, or "platform independent", - except that they sometimes must understand quirks or limitations - of the particular controllers they work with. For example, when - a controller doesn't support alternate configurations or provide - enough of the right types of endpoints, the gadget driver might - not be able work with that controller, or might need to implement - a less common variant of a device class protocol. - # this first set of drivers all depend on bulk-capable hardware. config USB_CONFIGFS @@ -439,6 +420,7 @@ config USB_CONFIGFS_F_HID config USB_CONFIGFS_F_UVC bool "USB Webcam function" depends on USB_CONFIGFS + depends on VIDEO_V4L2 depends on VIDEO_DEV select VIDEOBUF2_VMALLOC select USB_F_UVC @@ -475,6 +457,25 @@ config USB_CONFIGFS_F_TCM Both protocols can work on USB2.0 and USB3.0. UAS utilizes the USB 3.0 feature called streams support. +choice + tristate "USB Gadget Drivers" + default USB_ETH + help + A Linux "Gadget Driver" talks to the USB Peripheral Controller + driver through the abstract "gadget" API. Some other operating + systems call these "client" drivers, of which "class drivers" + are a subset (implementing a USB device class specification). + A gadget driver implements one or more USB functions using + the peripheral hardware. + + Gadget drivers are hardware-neutral, or "platform independent", + except that they sometimes must understand quirks or limitations + of the particular controllers they work with. For example, when + a controller doesn't support alternate configurations or provide + enough of the right types of endpoints, the gadget driver might + not be able work with that controller, or might need to implement + a less common variant of a device class protocol. + source "drivers/usb/gadget/legacy/Kconfig" endchoice diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c index 5ebe6af7976e..32176f779861 100644 --- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -1893,17 +1893,21 @@ unknown: /* functions always handle their interfaces and endpoints... * punt other recipients (other, WUSB, ...) to the current * configuration code. - * - * REVISIT it could make sense to let the composite device - * take such requests too, if that's ever needed: to work - * in config 0, etc. */ if (cdev->config) { list_for_each_entry(f, &cdev->config->functions, list) - if (f->req_match && f->req_match(f, ctrl)) + if (f->req_match && + f->req_match(f, ctrl, false)) goto try_fun_setup; - f = NULL; + } else { + struct usb_configuration *c; + list_for_each_entry(c, &cdev->configs, list) + list_for_each_entry(f, &c->functions, list) + if (f->req_match && + f->req_match(f, ctrl, true)) + goto try_fun_setup; } + f = NULL; switch (ctrl->bRequestType & USB_RECIP_MASK) { case USB_RECIP_INTERFACE: diff --git a/drivers/usb/gadget/configfs.c b/drivers/usb/gadget/configfs.c index f9237fe2be05..3984787f8e97 100644 --- a/drivers/usb/gadget/configfs.c +++ b/drivers/usb/gadget/configfs.c @@ -1211,8 +1211,9 @@ static void purge_configs_funcs(struct gadget_info *gi) list_move_tail(&f->list, &cfg->func_list); if (f->unbind) { - dev_err(&gi->cdev.gadget->dev, "unbind function" - " '%s'/%p\n", f->name, f); + dev_dbg(&gi->cdev.gadget->dev, + "unbind function '%s'/%p\n", + f->name, f); f->unbind(c, f); } } diff --git a/drivers/usb/gadget/function/f_fs.c b/drivers/usb/gadget/function/f_fs.c index 5c8429f23a89..0aeed85bb5cb 100644 --- a/drivers/usb/gadget/function/f_fs.c +++ b/drivers/usb/gadget/function/f_fs.c @@ -98,6 +98,9 @@ static int ffs_func_set_alt(struct usb_function *, unsigned, unsigned); static void ffs_func_disable(struct usb_function *); static int ffs_func_setup(struct usb_function *, const struct usb_ctrlrequest *); +static bool ffs_func_req_match(struct usb_function *, + const struct usb_ctrlrequest *, + bool config0); static void ffs_func_suspend(struct usb_function *); static void ffs_func_resume(struct usb_function *); @@ -2243,7 +2246,9 @@ static int __ffs_data_got_descs(struct ffs_data *ffs, FUNCTIONFS_HAS_SS_DESC | FUNCTIONFS_HAS_MS_OS_DESC | FUNCTIONFS_VIRTUAL_ADDR | - FUNCTIONFS_EVENTFD)) { + FUNCTIONFS_EVENTFD | + FUNCTIONFS_ALL_CTRL_RECIP | + FUNCTIONFS_CONFIG0_SETUP)) { ret = -ENOSYS; goto error; } @@ -3094,8 +3099,9 @@ static int ffs_func_setup(struct usb_function *f, * handle them. All other either handled by composite or * passed to usb_configuration->setup() (if one is set). No * matter, we will handle requests directed to endpoint here - * as well (as it's straightforward) but what to do with any - * other request? + * as well (as it's straightforward). Other request recipient + * types are only handled when the user flag FUNCTIONFS_ALL_CTRL_RECIP + * is being used. */ if (ffs->state != FFS_ACTIVE) return -ENODEV; @@ -3116,7 +3122,10 @@ static int ffs_func_setup(struct usb_function *f, break; default: - return -EOPNOTSUPP; + if (func->ffs->user_flags & FUNCTIONFS_ALL_CTRL_RECIP) + ret = le16_to_cpu(creq->wIndex); + else + return -EOPNOTSUPP; } spin_lock_irqsave(&ffs->ev.waitq.lock, flags); @@ -3128,6 +3137,28 @@ static int ffs_func_setup(struct usb_function *f, return 0; } +static bool ffs_func_req_match(struct usb_function *f, + const struct usb_ctrlrequest *creq, + bool config0) +{ + struct ffs_function *func = ffs_func_from_usb(f); + + if (config0 && !(func->ffs->user_flags & FUNCTIONFS_CONFIG0_SETUP)) + return false; + + switch (creq->bRequestType & USB_RECIP_MASK) { + case USB_RECIP_INTERFACE: + return ffs_func_revmap_intf(func, + le16_to_cpu(creq->wIndex) >= 0); + case USB_RECIP_ENDPOINT: + return ffs_func_revmap_ep(func, + le16_to_cpu(creq->wIndex) >= 0); + default: + return (bool) (func->ffs->user_flags & + FUNCTIONFS_ALL_CTRL_RECIP); + } +} + static void ffs_func_suspend(struct usb_function *f) { ENTER(); @@ -3378,6 +3409,7 @@ static struct usb_function *ffs_alloc(struct usb_function_instance *fi) func->function.set_alt = ffs_func_set_alt; func->function.disable = ffs_func_disable; func->function.setup = ffs_func_setup; + func->function.req_match = ffs_func_req_match; func->function.suspend = ffs_func_suspend; func->function.resume = ffs_func_resume; func->function.free_func = ffs_free; @@ -3470,6 +3502,11 @@ static void _ffs_free_dev(struct ffs_dev *dev) list_del(&dev->entry); if (dev->name_allocated) kfree(dev->name); + + /* Clear the private_data pointer to stop incorrect dev access */ + if (dev->ffs_data) + dev->ffs_data->private_data = NULL; + kfree(dev); if (list_empty(&ffs_devices)) functionfs_cleanup(); diff --git a/drivers/usb/gadget/function/f_hid.c b/drivers/usb/gadget/function/f_hid.c index 51980c50546d..e2966f87c860 100644 --- a/drivers/usb/gadget/function/f_hid.c +++ b/drivers/usb/gadget/function/f_hid.c @@ -365,7 +365,7 @@ static int f_hidg_open(struct inode *inode, struct file *fd) static inline struct usb_request *hidg_alloc_ep_req(struct usb_ep *ep, unsigned length) { - return alloc_ep_req(ep, length, length); + return alloc_ep_req(ep, length); } static void hidg_set_report_complete(struct usb_ep *ep, struct usb_request *req) @@ -617,14 +617,10 @@ static int hidg_bind(struct usb_configuration *c, struct usb_function *f) /* preallocate request and buffer */ status = -ENOMEM; - hidg->req = usb_ep_alloc_request(hidg->in_ep, GFP_KERNEL); + hidg->req = alloc_ep_req(hidg->in_ep, hidg->report_length); if (!hidg->req) goto fail; - hidg->req->buf = kmalloc(hidg->report_length, GFP_KERNEL); - if (!hidg->req->buf) - goto fail; - /* set descriptor dynamic values */ hidg_interface_desc.bInterfaceSubClass = hidg->bInterfaceSubClass; hidg_interface_desc.bInterfaceProtocol = hidg->bInterfaceProtocol; @@ -677,11 +673,8 @@ fail_free_descs: usb_free_all_descriptors(f); fail: ERROR(f->config->cdev, "hidg_bind FAILED\n"); - if (hidg->req != NULL) { - kfree(hidg->req->buf); - if (hidg->in_ep != NULL) - usb_ep_free_request(hidg->in_ep, hidg->req); - } + if (hidg->req != NULL) + free_ep_req(hidg->in_ep, hidg->req); return status; } @@ -809,11 +802,21 @@ end: CONFIGFS_ATTR(f_hid_opts_, report_desc); +static ssize_t f_hid_opts_dev_show(struct config_item *item, char *page) +{ + struct f_hid_opts *opts = to_f_hid_opts(item); + + return sprintf(page, "%d:%d\n", major, opts->minor); +} + +CONFIGFS_ATTR_RO(f_hid_opts_, dev); + static struct configfs_attribute *hid_attrs[] = { &f_hid_opts_attr_subclass, &f_hid_opts_attr_protocol, &f_hid_opts_attr_report_length, &f_hid_opts_attr_report_desc, + &f_hid_opts_attr_dev, NULL, }; @@ -910,8 +913,7 @@ static void hidg_unbind(struct usb_configuration *c, struct usb_function *f) /* disable/free request and end point */ usb_ep_disable(hidg->in_ep); - kfree(hidg->req->buf); - usb_ep_free_request(hidg->in_ep, hidg->req); + free_ep_req(hidg->in_ep, hidg->req); usb_free_all_descriptors(f); } diff --git a/drivers/usb/gadget/function/f_loopback.c b/drivers/usb/gadget/function/f_loopback.c index 3a9f8f9c77bd..e70093835e14 100644 --- a/drivers/usb/gadget/function/f_loopback.c +++ b/drivers/usb/gadget/function/f_loopback.c @@ -308,9 +308,7 @@ static void disable_loopback(struct f_loopback *loop) static inline struct usb_request *lb_alloc_ep_req(struct usb_ep *ep, int len) { - struct f_loopback *loop = ep->driver_data; - - return alloc_ep_req(ep, len, loop->buflen); + return alloc_ep_req(ep, len); } static int alloc_requests(struct usb_composite_dev *cdev, @@ -333,7 +331,7 @@ static int alloc_requests(struct usb_composite_dev *cdev, if (!in_req) goto fail; - out_req = lb_alloc_ep_req(loop->out_ep, 0); + out_req = lb_alloc_ep_req(loop->out_ep, loop->buflen); if (!out_req) goto fail_in; @@ -593,13 +591,9 @@ DECLARE_USB_FUNCTION(Loopback, loopback_alloc_instance, loopback_alloc); int __init lb_modinit(void) { - int ret; - - ret = usb_function_register(&Loopbackusb_func); - if (ret) - return ret; - return ret; + return usb_function_register(&Loopbackusb_func); } + void __exit lb_modexit(void) { usb_function_unregister(&Loopbackusb_func); diff --git a/drivers/usb/gadget/function/f_mass_storage.c b/drivers/usb/gadget/function/f_mass_storage.c index 2505117e88e8..8f3659b65f53 100644 --- a/drivers/usb/gadget/function/f_mass_storage.c +++ b/drivers/usb/gadget/function/f_mass_storage.c @@ -311,11 +311,7 @@ struct fsg_common { /* Gadget's private data. */ void *private_data; - /* - * Vendor (8 chars), product (16 chars), release (4 - * hexadecimal digits) and NUL byte - */ - char inquiry_string[8 + 16 + 4 + 1]; + char inquiry_string[INQUIRY_STRING_LEN]; struct kref ref; }; @@ -1107,7 +1103,12 @@ static int do_inquiry(struct fsg_common *common, struct fsg_buffhd *bh) buf[5] = 0; /* No special options */ buf[6] = 0; buf[7] = 0; - memcpy(buf + 8, common->inquiry_string, sizeof common->inquiry_string); + if (curlun->inquiry_string[0]) + memcpy(buf + 8, curlun->inquiry_string, + sizeof(curlun->inquiry_string)); + else + memcpy(buf + 8, common->inquiry_string, + sizeof(common->inquiry_string)); return 36; } @@ -3209,12 +3210,27 @@ static ssize_t fsg_lun_opts_nofua_store(struct config_item *item, CONFIGFS_ATTR(fsg_lun_opts_, nofua); +static ssize_t fsg_lun_opts_inquiry_string_show(struct config_item *item, + char *page) +{ + return fsg_show_inquiry_string(to_fsg_lun_opts(item)->lun, page); +} + +static ssize_t fsg_lun_opts_inquiry_string_store(struct config_item *item, + const char *page, size_t len) +{ + return fsg_store_inquiry_string(to_fsg_lun_opts(item)->lun, page, len); +} + +CONFIGFS_ATTR(fsg_lun_opts_, inquiry_string); + static struct configfs_attribute *fsg_lun_attrs[] = { &fsg_lun_opts_attr_file, &fsg_lun_opts_attr_ro, &fsg_lun_opts_attr_removable, &fsg_lun_opts_attr_cdrom, &fsg_lun_opts_attr_nofua, + &fsg_lun_opts_attr_inquiry_string, NULL, }; diff --git a/drivers/usb/gadget/function/f_mass_storage.h b/drivers/usb/gadget/function/f_mass_storage.h index b6a9918eaefb..d3902313b8ac 100644 --- a/drivers/usb/gadget/function/f_mass_storage.h +++ b/drivers/usb/gadget/function/f_mass_storage.h @@ -100,6 +100,7 @@ struct fsg_lun_config { char removable; char cdrom; char nofua; + char inquiry_string[INQUIRY_STRING_LEN]; }; struct fsg_config { diff --git a/drivers/usb/gadget/function/f_midi.c b/drivers/usb/gadget/function/f_midi.c index 58fc199a18ec..a5719f271bf0 100644 --- a/drivers/usb/gadget/function/f_midi.c +++ b/drivers/usb/gadget/function/f_midi.c @@ -51,6 +51,19 @@ static const char f_midi_longname[] = "MIDI Gadget"; */ #define MAX_PORTS 16 +/* MIDI message states */ +enum { + STATE_INITIAL = 0, /* pseudo state */ + STATE_1PARAM, + STATE_2PARAM_1, + STATE_2PARAM_2, + STATE_SYSEX_0, + STATE_SYSEX_1, + STATE_SYSEX_2, + STATE_REAL_TIME, + STATE_FINISHED, /* pseudo state */ +}; + /* * This is a gadget, and the IN/OUT naming is from the host's perspective. * USB -> OUT endpoint -> rawmidi @@ -61,13 +74,6 @@ struct gmidi_in_port { int active; uint8_t cable; uint8_t state; -#define STATE_UNKNOWN 0 -#define STATE_1PARAM 1 -#define STATE_2PARAM_1 2 -#define STATE_2PARAM_2 3 -#define STATE_SYSEX_0 4 -#define STATE_SYSEX_1 5 -#define STATE_SYSEX_2 6 uint8_t data[2]; }; @@ -205,7 +211,7 @@ static struct usb_gadget_strings *midi_strings[] = { static inline struct usb_request *midi_alloc_ep_req(struct usb_ep *ep, unsigned length) { - return alloc_ep_req(ep, length, length); + return alloc_ep_req(ep, length); } static const uint8_t f_midi_cin_length[] = { @@ -299,6 +305,19 @@ f_midi_complete(struct usb_ep *ep, struct usb_request *req) } } +static void f_midi_drop_out_substreams(struct f_midi *midi) +{ + unsigned int i; + + for (i = 0; i < midi->in_ports; i++) { + struct gmidi_in_port *port = midi->in_ports_array + i; + struct snd_rawmidi_substream *substream = port->substream; + + if (port->active && substream) + snd_rawmidi_drop_output(substream); + } +} + static int f_midi_start_ep(struct f_midi *midi, struct usb_function *f, struct usb_ep *ep) @@ -360,9 +379,8 @@ static int f_midi_set_alt(struct usb_function *f, unsigned intf, unsigned alt) /* allocate a bunch of read buffers and queue them all at once. */ for (i = 0; i < midi->qlen && err == 0; i++) { struct usb_request *req = - midi_alloc_ep_req(midi->out_ep, - max_t(unsigned, midi->buflen, - bulk_out_desc.wMaxPacketSize)); + midi_alloc_ep_req(midi->out_ep, midi->buflen); + if (req == NULL) return -ENOMEM; @@ -397,6 +415,8 @@ static void f_midi_disable(struct usb_function *f) /* release IN requests */ while (kfifo_get(&midi->in_req_fifo, &req)) free_ep_req(midi->in_ep, req); + + f_midi_drop_out_substreams(midi); } static int f_midi_snd_free(struct snd_device *device) @@ -404,130 +424,166 @@ static int f_midi_snd_free(struct snd_device *device) return 0; } -static void f_midi_transmit_packet(struct usb_request *req, uint8_t p0, - uint8_t p1, uint8_t p2, uint8_t p3) -{ - unsigned length = req->length; - u8 *buf = (u8 *)req->buf + length; - - buf[0] = p0; - buf[1] = p1; - buf[2] = p2; - buf[3] = p3; - req->length = length + 4; -} - /* * Converts MIDI commands to USB MIDI packets. */ static void f_midi_transmit_byte(struct usb_request *req, struct gmidi_in_port *port, uint8_t b) { - uint8_t p0 = port->cable << 4; + uint8_t p[4] = { port->cable << 4, 0, 0, 0 }; + uint8_t next_state = STATE_INITIAL; + + switch (b) { + case 0xf8 ... 0xff: + /* System Real-Time Messages */ + p[0] |= 0x0f; + p[1] = b; + next_state = port->state; + port->state = STATE_REAL_TIME; + break; - if (b >= 0xf8) { - f_midi_transmit_packet(req, p0 | 0x0f, b, 0, 0); - } else if (b >= 0xf0) { + case 0xf7: + /* End of SysEx */ + switch (port->state) { + case STATE_SYSEX_0: + p[0] |= 0x05; + p[1] = 0xf7; + next_state = STATE_FINISHED; + break; + case STATE_SYSEX_1: + p[0] |= 0x06; + p[1] = port->data[0]; + p[2] = 0xf7; + next_state = STATE_FINISHED; + break; + case STATE_SYSEX_2: + p[0] |= 0x07; + p[1] = port->data[0]; + p[2] = port->data[1]; + p[3] = 0xf7; + next_state = STATE_FINISHED; + break; + default: + /* Ignore byte */ + next_state = port->state; + port->state = STATE_INITIAL; + } + break; + + case 0xf0 ... 0xf6: + /* System Common Messages */ + port->data[0] = port->data[1] = 0; + port->state = STATE_INITIAL; switch (b) { case 0xf0: port->data[0] = b; - port->state = STATE_SYSEX_1; + port->data[1] = 0; + next_state = STATE_SYSEX_1; break; case 0xf1: case 0xf3: port->data[0] = b; - port->state = STATE_1PARAM; + next_state = STATE_1PARAM; break; case 0xf2: port->data[0] = b; - port->state = STATE_2PARAM_1; + next_state = STATE_2PARAM_1; break; case 0xf4: case 0xf5: - port->state = STATE_UNKNOWN; + next_state = STATE_INITIAL; break; case 0xf6: - f_midi_transmit_packet(req, p0 | 0x05, 0xf6, 0, 0); - port->state = STATE_UNKNOWN; - break; - case 0xf7: - switch (port->state) { - case STATE_SYSEX_0: - f_midi_transmit_packet(req, - p0 | 0x05, 0xf7, 0, 0); - break; - case STATE_SYSEX_1: - f_midi_transmit_packet(req, - p0 | 0x06, port->data[0], 0xf7, 0); - break; - case STATE_SYSEX_2: - f_midi_transmit_packet(req, - p0 | 0x07, port->data[0], - port->data[1], 0xf7); - break; - } - port->state = STATE_UNKNOWN; + p[0] |= 0x05; + p[1] = 0xf6; + next_state = STATE_FINISHED; break; } - } else if (b >= 0x80) { + break; + + case 0x80 ... 0xef: + /* + * Channel Voice Messages, Channel Mode Messages + * and Control Change Messages. + */ port->data[0] = b; + port->data[1] = 0; + port->state = STATE_INITIAL; if (b >= 0xc0 && b <= 0xdf) - port->state = STATE_1PARAM; + next_state = STATE_1PARAM; else - port->state = STATE_2PARAM_1; - } else { /* b < 0x80 */ + next_state = STATE_2PARAM_1; + break; + + case 0x00 ... 0x7f: + /* Message parameters */ switch (port->state) { case STATE_1PARAM: - if (port->data[0] < 0xf0) { - p0 |= port->data[0] >> 4; - } else { - p0 |= 0x02; - port->state = STATE_UNKNOWN; - } - f_midi_transmit_packet(req, p0, port->data[0], b, 0); + if (port->data[0] < 0xf0) + p[0] |= port->data[0] >> 4; + else + p[0] |= 0x02; + + p[1] = port->data[0]; + p[2] = b; + /* This is to allow Running State Messages */ + next_state = STATE_1PARAM; break; case STATE_2PARAM_1: port->data[1] = b; - port->state = STATE_2PARAM_2; + next_state = STATE_2PARAM_2; break; case STATE_2PARAM_2: - if (port->data[0] < 0xf0) { - p0 |= port->data[0] >> 4; - port->state = STATE_2PARAM_1; - } else { - p0 |= 0x03; - port->state = STATE_UNKNOWN; - } - f_midi_transmit_packet(req, - p0, port->data[0], port->data[1], b); + if (port->data[0] < 0xf0) + p[0] |= port->data[0] >> 4; + else + p[0] |= 0x03; + + p[1] = port->data[0]; + p[2] = port->data[1]; + p[3] = b; + /* This is to allow Running State Messages */ + next_state = STATE_2PARAM_1; break; case STATE_SYSEX_0: port->data[0] = b; - port->state = STATE_SYSEX_1; + next_state = STATE_SYSEX_1; break; case STATE_SYSEX_1: port->data[1] = b; - port->state = STATE_SYSEX_2; + next_state = STATE_SYSEX_2; break; case STATE_SYSEX_2: - f_midi_transmit_packet(req, - p0 | 0x04, port->data[0], port->data[1], b); - port->state = STATE_SYSEX_0; + p[0] |= 0x04; + p[1] = port->data[0]; + p[2] = port->data[1]; + p[3] = b; + next_state = STATE_SYSEX_0; break; } + break; } -} -static void f_midi_drop_out_substreams(struct f_midi *midi) -{ - unsigned int i; + /* States where we have to write into the USB request */ + if (next_state == STATE_FINISHED || + port->state == STATE_SYSEX_2 || + port->state == STATE_1PARAM || + port->state == STATE_2PARAM_2 || + port->state == STATE_REAL_TIME) { - for (i = 0; i < midi->in_ports; i++) { - struct gmidi_in_port *port = midi->in_ports_array + i; - struct snd_rawmidi_substream *substream = port->substream; - if (port->active && substream) - snd_rawmidi_drop_output(substream); + unsigned int length = req->length; + u8 *buf = (u8 *)req->buf + length; + + memcpy(buf, p, sizeof(p)); + req->length = length + sizeof(p); + + if (next_state == STATE_FINISHED) { + next_state = STATE_INITIAL; + port->data[0] = port->data[1] = 0; + } } + + port->state = next_state; } static int f_midi_do_transmit(struct f_midi *midi, struct usb_ep *ep) @@ -642,7 +698,7 @@ static int f_midi_in_open(struct snd_rawmidi_substream *substream) VDBG(midi, "%s()\n", __func__); port = midi->in_ports_array + substream->number; port->substream = substream; - port->state = STATE_UNKNOWN; + port->state = STATE_INITIAL; return 0; } @@ -1123,7 +1179,7 @@ static struct usb_function_instance *f_midi_alloc_inst(void) opts->func_inst.free_func_inst = f_midi_free_inst; opts->index = SNDRV_DEFAULT_IDX1; opts->id = SNDRV_DEFAULT_STR1; - opts->buflen = 256; + opts->buflen = 512; opts->qlen = 32; opts->in_ports = 1; opts->out_ports = 1; diff --git a/drivers/usb/gadget/function/f_ncm.c b/drivers/usb/gadget/function/f_ncm.c index 97f0a9bc84df..639603722709 100644 --- a/drivers/usb/gadget/function/f_ncm.c +++ b/drivers/usb/gadget/function/f_ncm.c @@ -90,7 +90,9 @@ static inline struct f_ncm *func_to_ncm(struct usb_function *f) /* peak (theoretical) bulk transfer rate in bits-per-second */ static inline unsigned ncm_bitrate(struct usb_gadget *g) { - if (gadget_is_dualspeed(g) && g->speed == USB_SPEED_HIGH) + if (gadget_is_superspeed(g) && g->speed == USB_SPEED_SUPER) + return 13 * 1024 * 8 * 1000 * 8; + else if (gadget_is_dualspeed(g) && g->speed == USB_SPEED_HIGH) return 13 * 512 * 8 * 1000 * 8; else return 19 * 64 * 1 * 1000 * 8; @@ -333,6 +335,76 @@ static struct usb_descriptor_header *ncm_hs_function[] = { NULL, }; + +/* super speed support: */ + +static struct usb_endpoint_descriptor ss_ncm_notify_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + + .bEndpointAddress = USB_DIR_IN, + .bmAttributes = USB_ENDPOINT_XFER_INT, + .wMaxPacketSize = cpu_to_le16(NCM_STATUS_BYTECOUNT), + .bInterval = USB_MS_TO_HS_INTERVAL(NCM_STATUS_INTERVAL_MS) +}; + +static struct usb_ss_ep_comp_descriptor ss_ncm_notify_comp_desc = { + .bLength = sizeof(ss_ncm_notify_comp_desc), + .bDescriptorType = USB_DT_SS_ENDPOINT_COMP, + + /* the following 3 values can be tweaked if necessary */ + /* .bMaxBurst = 0, */ + /* .bmAttributes = 0, */ + .wBytesPerInterval = cpu_to_le16(NCM_STATUS_BYTECOUNT), +}; + +static struct usb_endpoint_descriptor ss_ncm_in_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + + .bEndpointAddress = USB_DIR_IN, + .bmAttributes = USB_ENDPOINT_XFER_BULK, + .wMaxPacketSize = cpu_to_le16(1024), +}; + +static struct usb_endpoint_descriptor ss_ncm_out_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + + .bEndpointAddress = USB_DIR_OUT, + .bmAttributes = USB_ENDPOINT_XFER_BULK, + .wMaxPacketSize = cpu_to_le16(1024), +}; + +static struct usb_ss_ep_comp_descriptor ss_ncm_bulk_comp_desc = { + .bLength = sizeof(ss_ncm_bulk_comp_desc), + .bDescriptorType = USB_DT_SS_ENDPOINT_COMP, + + /* the following 2 values can be tweaked if necessary */ + /* .bMaxBurst = 0, */ + /* .bmAttributes = 0, */ +}; + +static struct usb_descriptor_header *ncm_ss_function[] = { + (struct usb_descriptor_header *) &ncm_iad_desc, + /* CDC NCM control descriptors */ + (struct usb_descriptor_header *) &ncm_control_intf, + (struct usb_descriptor_header *) &ncm_header_desc, + (struct usb_descriptor_header *) &ncm_union_desc, + (struct usb_descriptor_header *) &ecm_desc, + (struct usb_descriptor_header *) &ncm_desc, + (struct usb_descriptor_header *) &ss_ncm_notify_desc, + (struct usb_descriptor_header *) &ss_ncm_notify_comp_desc, + /* data interface, altsettings 0 and 1 */ + (struct usb_descriptor_header *) &ncm_data_nop_intf, + (struct usb_descriptor_header *) &ncm_data_intf, + (struct usb_descriptor_header *) &ss_ncm_in_desc, + (struct usb_descriptor_header *) &ss_ncm_bulk_comp_desc, + (struct usb_descriptor_header *) &ss_ncm_out_desc, + (struct usb_descriptor_header *) &ss_ncm_bulk_comp_desc, + NULL, +}; + /* string descriptors: */ #define STRING_CTRL_IDX 0 @@ -852,6 +924,8 @@ static int ncm_set_alt(struct usb_function *f, unsigned intf, unsigned alt) */ ncm->port.is_zlp_ok = gadget_is_zlp_supported(cdev->gadget); + ncm->port.no_skb_reserve = + gadget_avoids_skb_reserve(cdev->gadget); ncm->port.cdc_filter = DEFAULT_FILTER; DBG(cdev, "activate ncm\n"); net = gether_connect(&ncm->port); @@ -1431,8 +1505,13 @@ static int ncm_bind(struct usb_configuration *c, struct usb_function *f) hs_ncm_notify_desc.bEndpointAddress = fs_ncm_notify_desc.bEndpointAddress; + ss_ncm_in_desc.bEndpointAddress = fs_ncm_in_desc.bEndpointAddress; + ss_ncm_out_desc.bEndpointAddress = fs_ncm_out_desc.bEndpointAddress; + ss_ncm_notify_desc.bEndpointAddress = + fs_ncm_notify_desc.bEndpointAddress; + status = usb_assign_descriptors(f, ncm_fs_function, ncm_hs_function, - NULL, NULL); + ncm_ss_function, NULL); if (status) goto fail; @@ -1450,6 +1529,7 @@ static int ncm_bind(struct usb_configuration *c, struct usb_function *f) ncm->task_timer.function = ncm_tx_timeout; DBG(cdev, "CDC Network: %s speed IN/%s OUT/%s NOTIFY/%s\n", + gadget_is_superspeed(c->cdev->gadget) ? "super" : gadget_is_dualspeed(c->cdev->gadget) ? "dual" : "full", ncm->port.in_ep->name, ncm->port.out_ep->name, ncm->notify->name); diff --git a/drivers/usb/gadget/function/f_printer.c b/drivers/usb/gadget/function/f_printer.c index 64706a789580..0de36cda6e41 100644 --- a/drivers/usb/gadget/function/f_printer.c +++ b/drivers/usb/gadget/function/f_printer.c @@ -889,13 +889,17 @@ static void printer_soft_reset(struct printer_dev *dev) /*-------------------------------------------------------------------------*/ static bool gprinter_req_match(struct usb_function *f, - const struct usb_ctrlrequest *ctrl) + const struct usb_ctrlrequest *ctrl, + bool config0) { struct printer_dev *dev = func_to_printer(f); u16 w_index = le16_to_cpu(ctrl->wIndex); u16 w_value = le16_to_cpu(ctrl->wValue); u16 w_length = le16_to_cpu(ctrl->wLength); + if (config0) + return false; + if ((ctrl->bRequestType & USB_RECIP_MASK) != USB_RECIP_INTERFACE || (ctrl->bRequestType & USB_TYPE_MASK) != USB_TYPE_CLASS) return false; diff --git a/drivers/usb/gadget/function/f_sourcesink.c b/drivers/usb/gadget/function/f_sourcesink.c index df0189ddfdd5..8784fa12ea2c 100644 --- a/drivers/usb/gadget/function/f_sourcesink.c +++ b/drivers/usb/gadget/function/f_sourcesink.c @@ -293,9 +293,7 @@ static struct usb_gadget_strings *sourcesink_strings[] = { static inline struct usb_request *ss_alloc_ep_req(struct usb_ep *ep, int len) { - struct f_sourcesink *ss = ep->driver_data; - - return alloc_ep_req(ep, len, ss->buflen); + return alloc_ep_req(ep, len); } static void disable_ep(struct usb_composite_dev *cdev, struct usb_ep *ep) @@ -606,7 +604,7 @@ static int source_sink_start_ep(struct f_sourcesink *ss, bool is_in, } else { ep = is_in ? ss->in_ep : ss->out_ep; qlen = ss->bulk_qlen; - size = 0; + size = ss->buflen; } for (i = 0; i < qlen; i++) { diff --git a/drivers/usb/gadget/function/f_uvc.c b/drivers/usb/gadget/function/f_uvc.c index 29b41b5dee04..27ed51b5082f 100644 --- a/drivers/usb/gadget/function/f_uvc.c +++ b/drivers/usb/gadget/function/f_uvc.c @@ -258,6 +258,13 @@ uvc_function_setup(struct usb_function *f, const struct usb_ctrlrequest *ctrl) memcpy(&uvc_event->req, ctrl, sizeof(uvc_event->req)); v4l2_event_queue(&uvc->vdev, &v4l2_event); + /* Pass additional setup data to userspace */ + if (uvc->event_setup_out && uvc->event_length) { + uvc->control_req->length = uvc->event_length; + return usb_ep_queue(uvc->func.config->cdev->gadget->ep0, + uvc->control_req, GFP_ATOMIC); + } + return 0; } diff --git a/drivers/usb/gadget/function/storage_common.c b/drivers/usb/gadget/function/storage_common.c index 990df221c629..8fbf6861690d 100644 --- a/drivers/usb/gadget/function/storage_common.c +++ b/drivers/usb/gadget/function/storage_common.c @@ -369,6 +369,12 @@ ssize_t fsg_show_removable(struct fsg_lun *curlun, char *buf) } EXPORT_SYMBOL_GPL(fsg_show_removable); +ssize_t fsg_show_inquiry_string(struct fsg_lun *curlun, char *buf) +{ + return sprintf(buf, "%s\n", curlun->inquiry_string); +} +EXPORT_SYMBOL_GPL(fsg_show_inquiry_string); + /* * The caller must hold fsg->filesem for reading when calling this function. */ @@ -499,4 +505,22 @@ ssize_t fsg_store_removable(struct fsg_lun *curlun, const char *buf, } EXPORT_SYMBOL_GPL(fsg_store_removable); +ssize_t fsg_store_inquiry_string(struct fsg_lun *curlun, const char *buf, + size_t count) +{ + const size_t len = min(count, sizeof(curlun->inquiry_string)); + + if (len == 0 || buf[0] == '\n') { + curlun->inquiry_string[0] = 0; + } else { + snprintf(curlun->inquiry_string, + sizeof(curlun->inquiry_string), "%-28s", buf); + if (curlun->inquiry_string[len-1] == '\n') + curlun->inquiry_string[len-1] = ' '; + } + + return count; +} +EXPORT_SYMBOL_GPL(fsg_store_inquiry_string); + MODULE_LICENSE("GPL"); diff --git a/drivers/usb/gadget/function/storage_common.h b/drivers/usb/gadget/function/storage_common.h index c3544e61da66..e69848994cb4 100644 --- a/drivers/usb/gadget/function/storage_common.h +++ b/drivers/usb/gadget/function/storage_common.h @@ -88,6 +88,12 @@ do { \ #define ASC(x) ((u8) ((x) >> 8)) #define ASCQ(x) ((u8) (x)) +/* + * Vendor (8 chars), product (16 chars), release (4 hexadecimal digits) and NUL + * byte + */ +#define INQUIRY_STRING_LEN ((size_t) (8 + 16 + 4 + 1)) + struct fsg_lun { struct file *filp; loff_t file_length; @@ -112,6 +118,7 @@ struct fsg_lun { struct device dev; const char *name; /* "lun.name" */ const char **name_pfx; /* "function.name" */ + char inquiry_string[INQUIRY_STRING_LEN]; }; static inline bool fsg_lun_is_open(struct fsg_lun *curlun) @@ -210,6 +217,7 @@ ssize_t fsg_show_ro(struct fsg_lun *curlun, char *buf); ssize_t fsg_show_nofua(struct fsg_lun *curlun, char *buf); ssize_t fsg_show_file(struct fsg_lun *curlun, struct rw_semaphore *filesem, char *buf); +ssize_t fsg_show_inquiry_string(struct fsg_lun *curlun, char *buf); ssize_t fsg_show_cdrom(struct fsg_lun *curlun, char *buf); ssize_t fsg_show_removable(struct fsg_lun *curlun, char *buf); ssize_t fsg_store_ro(struct fsg_lun *curlun, struct rw_semaphore *filesem, @@ -221,5 +229,7 @@ ssize_t fsg_store_cdrom(struct fsg_lun *curlun, struct rw_semaphore *filesem, const char *buf, size_t count); ssize_t fsg_store_removable(struct fsg_lun *curlun, const char *buf, size_t count); +ssize_t fsg_store_inquiry_string(struct fsg_lun *curlun, const char *buf, + size_t count); #endif /* USB_STORAGE_COMMON_H */ diff --git a/drivers/usb/gadget/function/u_ether.c b/drivers/usb/gadget/function/u_ether.c index 5f562c1ec795..8cb08033b7c1 100644 --- a/drivers/usb/gadget/function/u_ether.c +++ b/drivers/usb/gadget/function/u_ether.c @@ -82,6 +82,7 @@ struct eth_dev { #define WORK_RX_MEMORY 0 bool zlp; + bool no_skb_reserve; u8 host_mac[ETH_ALEN]; u8 dev_mac[ETH_ALEN]; }; @@ -233,7 +234,8 @@ rx_submit(struct eth_dev *dev, struct usb_request *req, gfp_t gfp_flags) * but on at least one, checksumming fails otherwise. Note: * RNDIS headers involve variable numbers of LE32 values. */ - skb_reserve(skb, NET_IP_ALIGN); + if (likely(!dev->no_skb_reserve)) + skb_reserve(skb, NET_IP_ALIGN); req->buf = skb->data; req->length = size; @@ -551,14 +553,16 @@ static netdev_tx_t eth_start_xmit(struct sk_buff *skb, spin_lock_irqsave(&dev->lock, flags); if (dev->port_usb) skb = dev->wrap(dev->port_usb, skb); - spin_unlock_irqrestore(&dev->lock, flags); if (!skb) { /* Multi frame CDC protocols may store the frame for * later which is not a dropped frame. */ if (dev->port_usb && - dev->port_usb->supports_multi_frame) + dev->port_usb->supports_multi_frame) { + spin_unlock_irqrestore(&dev->lock, flags); goto multiframe; + } + spin_unlock_irqrestore(&dev->lock, flags); goto drop; } } @@ -569,12 +573,14 @@ static netdev_tx_t eth_start_xmit(struct sk_buff *skb, req->complete = tx_complete; /* NCM requires no zlp if transfer is dwNtbInMaxSize */ - if (dev->port_usb->is_fixed && + if (dev->port_usb && + dev->port_usb->is_fixed && length == dev->port_usb->fixed_in_len && (length % in->maxpacket) == 0) req->zero = 0; else req->zero = 1; + spin_unlock_irqrestore(&dev->lock, flags); /* use zlp framing on tx for strict CDC-Ether conformance, * though any robust network rx path ignores extra padding. @@ -1063,6 +1069,7 @@ struct net_device *gether_connect(struct gether *link) if (result == 0) { dev->zlp = link->is_zlp_ok; + dev->no_skb_reserve = link->no_skb_reserve; DBG(dev, "qlen %d\n", qlen(dev->gadget, dev->qmult)); dev->header_len = link->header_len; diff --git a/drivers/usb/gadget/function/u_ether.h b/drivers/usb/gadget/function/u_ether.h index c77145bd6b5b..81d94a7ae4b4 100644 --- a/drivers/usb/gadget/function/u_ether.h +++ b/drivers/usb/gadget/function/u_ether.h @@ -64,6 +64,7 @@ struct gether { struct usb_ep *out_ep; bool is_zlp_ok; + bool no_skb_reserve; u16 cdc_filter; diff --git a/drivers/usb/gadget/legacy/gmidi.c b/drivers/usb/gadget/legacy/gmidi.c index fc2ac150f5ff..0bf39c3ccdb1 100644 --- a/drivers/usb/gadget/legacy/gmidi.c +++ b/drivers/usb/gadget/legacy/gmidi.c @@ -47,7 +47,7 @@ static char *id = SNDRV_DEFAULT_STR1; module_param(id, charp, S_IRUGO); MODULE_PARM_DESC(id, "ID string for the USB MIDI Gadget adapter."); -static unsigned int buflen = 256; +static unsigned int buflen = 512; module_param(buflen, uint, S_IRUGO); MODULE_PARM_DESC(buflen, "MIDI buffer length"); diff --git a/drivers/usb/gadget/u_f.c b/drivers/usb/gadget/u_f.c index 4bc7eea8bfc8..18839732c840 100644 --- a/drivers/usb/gadget/u_f.c +++ b/drivers/usb/gadget/u_f.c @@ -12,14 +12,16 @@ */ #include "u_f.h" +#include <linux/usb/ch9.h> -struct usb_request *alloc_ep_req(struct usb_ep *ep, int len, int default_len) +struct usb_request *alloc_ep_req(struct usb_ep *ep, size_t len) { struct usb_request *req; req = usb_ep_alloc_request(ep, GFP_ATOMIC); if (req) { - req->length = len ?: default_len; + req->length = usb_endpoint_dir_out(ep->desc) ? + usb_ep_align(ep, len) : len; req->buf = kmalloc(req->length, GFP_ATOMIC); if (!req->buf) { usb_ep_free_request(ep, req); diff --git a/drivers/usb/gadget/u_f.h b/drivers/usb/gadget/u_f.h index 4247cc098a89..7d53a4773d1a 100644 --- a/drivers/usb/gadget/u_f.h +++ b/drivers/usb/gadget/u_f.h @@ -47,8 +47,21 @@ struct usb_ep; struct usb_request; -/* Requests allocated via alloc_ep_req() must be freed by free_ep_req(). */ -struct usb_request *alloc_ep_req(struct usb_ep *ep, int len, int default_len); +/** + * alloc_ep_req - returns a usb_request allocated by the gadget driver and + * allocates the request's buffer. + * + * @ep: the endpoint to allocate a usb_request + * @len: usb_requests's buffer suggested size + * + * In case @ep direction is OUT, the @len will be aligned to ep's + * wMaxPacketSize. In order to avoid memory leaks or drops, *always* use + * usb_requests's length (req->length) to refer to the allocated buffer size. + * Requests allocated via alloc_ep_req() *must* be freed by free_ep_req(). + */ +struct usb_request *alloc_ep_req(struct usb_ep *ep, size_t len); + +/* Frees a usb_request previously allocated by alloc_ep_req() */ static inline void free_ep_req(struct usb_ep *ep, struct usb_request *req) { kfree(req->buf); diff --git a/drivers/usb/gadget/udc/core.c b/drivers/usb/gadget/udc/core.c index 40c04bb25f2f..9483489080f6 100644 --- a/drivers/usb/gadget/udc/core.c +++ b/drivers/usb/gadget/udc/core.c @@ -107,10 +107,8 @@ int usb_ep_enable(struct usb_ep *ep) goto out; ret = ep->ops->enable(ep, ep->desc); - if (ret) { - ret = ret; + if (ret) goto out; - } ep->enabled = true; diff --git a/drivers/usb/gadget/udc/goku_udc.c b/drivers/usb/gadget/udc/goku_udc.c index 1400415fe67a..5107987bd353 100644 --- a/drivers/usb/gadget/udc/goku_udc.c +++ b/drivers/usb/gadget/udc/goku_udc.c @@ -1838,6 +1838,8 @@ static int goku_probe(struct pci_dev *pdev, const struct pci_device_id *id) err: if (dev) goku_remove (pdev); + /* gadget_release is not registered yet, kfree explicitly */ + kfree(dev); return retval; } diff --git a/drivers/usb/gadget/udc/net2280.c b/drivers/usb/gadget/udc/net2280.c index 614ab951a4ae..61c938c36d88 100644 --- a/drivers/usb/gadget/udc/net2280.c +++ b/drivers/usb/gadget/udc/net2280.c @@ -589,7 +589,7 @@ static void net2280_free_request(struct usb_ep *_ep, struct usb_request *_req) ep = container_of(_ep, struct net2280_ep, ep); if (!_ep || !_req) { - dev_err(&ep->dev->pdev->dev, "%s: Inavlid ep=%p or req=%p\n", + dev_err(&ep->dev->pdev->dev, "%s: Invalid ep=%p or req=%p\n", __func__, _ep, _req); return; } @@ -1137,8 +1137,10 @@ dma_done(struct net2280_ep *ep, struct net2280_request *req, u32 dmacount, done(ep, req, status); } -static void scan_dma_completions(struct net2280_ep *ep) +static int scan_dma_completions(struct net2280_ep *ep) { + int num_completed = 0; + /* only look at descriptors that were "naturally" retired, * so fifo and list head state won't matter */ @@ -1166,6 +1168,7 @@ static void scan_dma_completions(struct net2280_ep *ep) break; /* single transfer mode */ dma_done(ep, req, tmp, 0); + num_completed++; break; } else if (!ep->is_in && (req->req.length % ep->ep.maxpacket) && @@ -1194,7 +1197,10 @@ static void scan_dma_completions(struct net2280_ep *ep) } } dma_done(ep, req, tmp, 0); + num_completed++; } + + return num_completed; } static void restart_dma(struct net2280_ep *ep) @@ -1567,6 +1573,44 @@ static struct usb_ep *net2280_match_ep(struct usb_gadget *_gadget, return ep; } + /* USB3380: Only first four endpoints have DMA channels. Allocate + * slower interrupt endpoints from PIO hw endpoints, to allow bulk/isoc + * endpoints use DMA hw endpoints. + */ + if (usb_endpoint_type(desc) == USB_ENDPOINT_XFER_INT && + usb_endpoint_dir_in(desc)) { + ep = gadget_find_ep_by_name(_gadget, "ep2in"); + if (ep && usb_gadget_ep_match_desc(_gadget, ep, desc, ep_comp)) + return ep; + ep = gadget_find_ep_by_name(_gadget, "ep4in"); + if (ep && usb_gadget_ep_match_desc(_gadget, ep, desc, ep_comp)) + return ep; + } else if (usb_endpoint_type(desc) == USB_ENDPOINT_XFER_INT && + !usb_endpoint_dir_in(desc)) { + ep = gadget_find_ep_by_name(_gadget, "ep1out"); + if (ep && usb_gadget_ep_match_desc(_gadget, ep, desc, ep_comp)) + return ep; + ep = gadget_find_ep_by_name(_gadget, "ep3out"); + if (ep && usb_gadget_ep_match_desc(_gadget, ep, desc, ep_comp)) + return ep; + } else if (usb_endpoint_type(desc) != USB_ENDPOINT_XFER_BULK && + usb_endpoint_dir_in(desc)) { + ep = gadget_find_ep_by_name(_gadget, "ep1in"); + if (ep && usb_gadget_ep_match_desc(_gadget, ep, desc, ep_comp)) + return ep; + ep = gadget_find_ep_by_name(_gadget, "ep3in"); + if (ep && usb_gadget_ep_match_desc(_gadget, ep, desc, ep_comp)) + return ep; + } else if (usb_endpoint_type(desc) != USB_ENDPOINT_XFER_BULK && + !usb_endpoint_dir_in(desc)) { + ep = gadget_find_ep_by_name(_gadget, "ep2out"); + if (ep && usb_gadget_ep_match_desc(_gadget, ep, desc, ep_comp)) + return ep; + ep = gadget_find_ep_by_name(_gadget, "ep4out"); + if (ep && usb_gadget_ep_match_desc(_gadget, ep, desc, ep_comp)) + return ep; + } + /* USB3380: use same address for usb and hardware endpoints */ snprintf(name, sizeof(name), "ep%d%s", usb_endpoint_num(desc), usb_endpoint_dir_in(desc) ? "in" : "out"); @@ -2547,8 +2591,11 @@ static void handle_ep_small(struct net2280_ep *ep) /* manual DMA queue advance after short OUT */ if (likely(ep->dma)) { if (t & BIT(SHORT_PACKET_TRANSFERRED_INTERRUPT)) { - u32 count; + struct net2280_request *stuck_req = NULL; int stopped = ep->stopped; + int num_completed; + int stuck = 0; + u32 count; /* TRANSFERRED works around OUT_DONE erratum 0112. * we expect (N <= maxpacket) bytes; host wrote M. @@ -2560,7 +2607,7 @@ static void handle_ep_small(struct net2280_ep *ep) /* any preceding dma transfers must finish. * dma handles (M >= N), may empty the queue */ - scan_dma_completions(ep); + num_completed = scan_dma_completions(ep); if (unlikely(list_empty(&ep->queue) || ep->out_overflow)) { req = NULL; @@ -2580,6 +2627,31 @@ static void handle_ep_small(struct net2280_ep *ep) req = NULL; break; } + + /* Escape loop if no dma transfers completed + * after few retries. + */ + if (num_completed == 0) { + if (stuck_req == req && + readl(&ep->dma->dmadesc) != + req->td_dma && stuck++ > 5) { + count = readl( + &ep->dma->dmacount); + count &= DMA_BYTE_COUNT_MASK; + req = NULL; + ep_dbg(ep->dev, "%s escape stuck %d, count %u\n", + ep->ep.name, stuck, + count); + break; + } else if (stuck_req != req) { + stuck_req = req; + stuck = 0; + } + } else { + stuck_req = NULL; + stuck = 0; + } + udelay(1); } diff --git a/drivers/usb/gadget/udc/pxa27x_udc.c b/drivers/usb/gadget/udc/pxa27x_udc.c index ad140aa00132..7fa60f5b7ae4 100644 --- a/drivers/usb/gadget/udc/pxa27x_udc.c +++ b/drivers/usb/gadget/udc/pxa27x_udc.c @@ -33,6 +33,7 @@ #include <linux/usb.h> #include <linux/usb/ch9.h> #include <linux/usb/gadget.h> +#include <linux/usb/phy.h> #include "pxa27x_udc.h" @@ -1655,6 +1656,37 @@ static int pxa_udc_vbus_draw(struct usb_gadget *_gadget, unsigned mA) return -EOPNOTSUPP; } +/** + * pxa_udc_phy_event - Called by phy upon VBus event + * @nb: notifier block + * @action: phy action, is vbus connect or disconnect + * @data: the usb_gadget structure in pxa_udc + * + * Called by the USB Phy when a cable connect or disconnect is sensed. + * + * Returns 0 + */ +static int pxa_udc_phy_event(struct notifier_block *nb, unsigned long action, + void *data) +{ + struct usb_gadget *gadget = data; + + switch (action) { + case USB_EVENT_VBUS: + usb_gadget_vbus_connect(gadget); + return NOTIFY_OK; + case USB_EVENT_NONE: + usb_gadget_vbus_disconnect(gadget); + return NOTIFY_OK; + default: + return NOTIFY_DONE; + } +} + +static struct notifier_block pxa27x_udc_phy = { + .notifier_call = pxa_udc_phy_event, +}; + static int pxa27x_udc_start(struct usb_gadget *g, struct usb_gadget_driver *driver); static int pxa27x_udc_stop(struct usb_gadget *g); @@ -2432,7 +2464,14 @@ static int pxa_udc_probe(struct platform_device *pdev) return udc->irq; udc->dev = &pdev->dev; - udc->transceiver = usb_get_phy(USB_PHY_TYPE_USB2); + if (of_have_populated_dt()) { + udc->transceiver = + devm_usb_get_phy_by_phandle(udc->dev, "phys", 0); + if (IS_ERR(udc->transceiver)) + return PTR_ERR(udc->transceiver); + } else { + udc->transceiver = usb_get_phy(USB_PHY_TYPE_USB2); + } if (IS_ERR(udc->gpiod)) { dev_err(&pdev->dev, "Couldn't find or request D+ gpio : %ld\n", @@ -2465,14 +2504,20 @@ static int pxa_udc_probe(struct platform_device *pdev) goto err; } + if (!IS_ERR_OR_NULL(udc->transceiver)) + usb_register_notifier(udc->transceiver, &pxa27x_udc_phy); retval = usb_add_gadget_udc(&pdev->dev, &udc->gadget); if (retval) - goto err; + goto err_add_gadget; pxa_init_debugfs(udc); if (should_enable_udc(udc)) udc_enable(udc); return 0; + +err_add_gadget: + if (!IS_ERR_OR_NULL(udc->transceiver)) + usb_unregister_notifier(udc->transceiver, &pxa27x_udc_phy); err: clk_unprepare(udc->clk); return retval; @@ -2489,6 +2534,8 @@ static int pxa_udc_remove(struct platform_device *_dev) usb_del_gadget_udc(&udc->gadget); pxa_cleanup_debugfs(udc); + if (!IS_ERR_OR_NULL(udc->transceiver)) + usb_unregister_notifier(udc->transceiver, &pxa27x_udc_phy); usb_put_phy(udc->transceiver); udc->transceiver = NULL; diff --git a/drivers/usb/phy/phy-ab8500-usb.c b/drivers/usb/phy/phy-ab8500-usb.c index 0c912d3950a5..a03caf4b1327 100644 --- a/drivers/usb/phy/phy-ab8500-usb.c +++ b/drivers/usb/phy/phy-ab8500-usb.c @@ -1248,7 +1248,7 @@ static void ab8500_usb_set_ab8500_tuning_values(struct ab8500_usb *ab) err = abx500_set_register_interruptible(ab->dev, AB8500_DEBUG, AB8500_USB_PHY_TUNE3, 0x78); if (err < 0) - dev_err(ab->dev, "Failed to set PHY_TUNE3 regester err=%d\n", + dev_err(ab->dev, "Failed to set PHY_TUNE3 register err=%d\n", err); /* Switch to normal mode/disable Bank 0x12 access */ @@ -1290,7 +1290,7 @@ static void ab8500_usb_set_ab8505_tuning_values(struct ab8500_usb *ab) 0xFC, 0x80); if (err < 0) - dev_err(ab->dev, "Failed to set PHY_TUNE3 regester err=%d\n", + dev_err(ab->dev, "Failed to set PHY_TUNE3 register err=%d\n", err); /* Switch to normal mode/disable Bank 0x12 access */ @@ -1321,7 +1321,7 @@ static void ab8500_usb_set_ab8540_tuning_values(struct ab8500_usb *ab) err = abx500_set_register_interruptible(ab->dev, AB8540_DEBUG, AB8500_USB_PHY_TUNE3, 0x90); if (err < 0) - dev_err(ab->dev, "Failed to set PHY_TUNE3 regester ret=%d\n", + dev_err(ab->dev, "Failed to set PHY_TUNE3 register ret=%d\n", err); } @@ -1351,7 +1351,7 @@ static void ab8500_usb_set_ab9540_tuning_values(struct ab8500_usb *ab) err = abx500_set_register_interruptible(ab->dev, AB8500_DEBUG, AB8500_USB_PHY_TUNE3, 0x80); if (err < 0) - dev_err(ab->dev, "Failed to set PHY_TUNE3 regester err=%d\n", + dev_err(ab->dev, "Failed to set PHY_TUNE3 register err=%d\n", err); /* Switch to normal mode/disable Bank 0x12 access */ diff --git a/drivers/usb/phy/phy-generic.c b/drivers/usb/phy/phy-generic.c index 427efb5eebae..8311ba2968cd 100644 --- a/drivers/usb/phy/phy-generic.c +++ b/drivers/usb/phy/phy-generic.c @@ -118,8 +118,6 @@ static irqreturn_t nop_gpio_vbus_thread(int irq, void *data) status = USB_EVENT_VBUS; otg->state = OTG_STATE_B_PERIPHERAL; nop->phy.last_event = status; - if (otg->gadget) - usb_gadget_vbus_connect(otg->gadget); /* drawing a "unit load" is *always* OK, except for OTG */ nop_set_vbus_draw(nop, 100); @@ -129,8 +127,6 @@ static irqreturn_t nop_gpio_vbus_thread(int irq, void *data) } else { nop_set_vbus_draw(nop, 0); - if (otg->gadget) - usb_gadget_vbus_disconnect(otg->gadget); status = USB_EVENT_NONE; otg->state = OTG_STATE_B_IDLE; nop->phy.last_event = status; @@ -191,7 +187,8 @@ static int nop_set_peripheral(struct usb_otg *otg, struct usb_gadget *gadget) otg->gadget = gadget; if (otg->state == OTG_STATE_B_PERIPHERAL) - usb_gadget_vbus_connect(gadget); + atomic_notifier_call_chain(&otg->usb_phy->notifier, + USB_EVENT_VBUS, otg->gadget); else otg->state = OTG_STATE_B_IDLE; return 0; @@ -326,6 +323,8 @@ static int usb_phy_generic_probe(struct platform_device *pdev) gpiod_to_irq(nop->gpiod_vbus), err); return err; } + nop->phy.otg->state = gpiod_get_value(nop->gpiod_vbus) ? + OTG_STATE_B_PERIPHERAL : OTG_STATE_B_IDLE; } nop->phy.init = usb_gen_phy_init; diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c index 00bfea01be65..0e2f1a36d315 100644 --- a/drivers/usb/phy/phy-mxs-usb.c +++ b/drivers/usb/phy/phy-mxs-usb.c @@ -27,6 +27,7 @@ #define DRIVER_NAME "mxs_phy" #define HW_USBPHY_PWD 0x00 +#define HW_USBPHY_TX 0x10 #define HW_USBPHY_CTRL 0x30 #define HW_USBPHY_CTRL_SET 0x34 #define HW_USBPHY_CTRL_CLR 0x38 @@ -38,6 +39,10 @@ #define HW_USBPHY_IP_SET 0x94 #define HW_USBPHY_IP_CLR 0x98 +#define GM_USBPHY_TX_TXCAL45DP(x) (((x) & 0xf) << 16) +#define GM_USBPHY_TX_TXCAL45DN(x) (((x) & 0xf) << 8) +#define GM_USBPHY_TX_D_CAL(x) (((x) & 0xf) << 0) + #define BM_USBPHY_CTRL_SFTRST BIT(31) #define BM_USBPHY_CTRL_CLKGATE BIT(30) #define BM_USBPHY_CTRL_OTG_ID_VALUE BIT(27) @@ -115,6 +120,12 @@ */ #define MXS_PHY_NEED_IP_FIX BIT(3) +/* Minimum and maximum values for device tree entries */ +#define MXS_PHY_TX_CAL45_MIN 30 +#define MXS_PHY_TX_CAL45_MAX 55 +#define MXS_PHY_TX_D_CAL_MIN 79 +#define MXS_PHY_TX_D_CAL_MAX 119 + struct mxs_phy_data { unsigned int flags; }; @@ -164,6 +175,8 @@ struct mxs_phy { const struct mxs_phy_data *data; struct regmap *regmap_anatop; int port_id; + u32 tx_reg_set; + u32 tx_reg_mask; }; static inline bool is_imx6q_phy(struct mxs_phy *mxs_phy) @@ -185,6 +198,20 @@ static void mxs_phy_clock_switch_delay(void) usleep_range(300, 400); } +static void mxs_phy_tx_init(struct mxs_phy *mxs_phy) +{ + void __iomem *base = mxs_phy->phy.io_priv; + u32 phytx; + + /* Update TX register if there is anything to write */ + if (mxs_phy->tx_reg_mask) { + phytx = readl(base + HW_USBPHY_TX); + phytx &= ~mxs_phy->tx_reg_mask; + phytx |= mxs_phy->tx_reg_set; + writel(phytx, base + HW_USBPHY_TX); + } +} + static int mxs_phy_hw_init(struct mxs_phy *mxs_phy) { int ret; @@ -214,6 +241,8 @@ static int mxs_phy_hw_init(struct mxs_phy *mxs_phy) if (mxs_phy->data->flags & MXS_PHY_NEED_IP_FIX) writel(BM_USBPHY_IP_FIX, base + HW_USBPHY_IP_SET); + mxs_phy_tx_init(mxs_phy); + return 0; } @@ -459,6 +488,7 @@ static int mxs_phy_probe(struct platform_device *pdev) int ret; const struct of_device_id *of_id; struct device_node *np = pdev->dev.of_node; + u32 val; of_id = of_match_device(mxs_phy_dt_ids, &pdev->dev); if (!of_id) @@ -491,6 +521,37 @@ static int mxs_phy_probe(struct platform_device *pdev) } } + /* Precompute which bits of the TX register are to be updated, if any */ + if (!of_property_read_u32(np, "fsl,tx-cal-45-dn-ohms", &val) && + val >= MXS_PHY_TX_CAL45_MIN && val <= MXS_PHY_TX_CAL45_MAX) { + /* Scale to a 4-bit value */ + val = (MXS_PHY_TX_CAL45_MAX - val) * 0xF + / (MXS_PHY_TX_CAL45_MAX - MXS_PHY_TX_CAL45_MIN); + mxs_phy->tx_reg_mask |= GM_USBPHY_TX_TXCAL45DN(~0); + mxs_phy->tx_reg_set |= GM_USBPHY_TX_TXCAL45DN(val); + } + + if (!of_property_read_u32(np, "fsl,tx-cal-45-dp-ohms", &val) && + val >= MXS_PHY_TX_CAL45_MIN && val <= MXS_PHY_TX_CAL45_MAX) { + /* Scale to a 4-bit value. */ + val = (MXS_PHY_TX_CAL45_MAX - val) * 0xF + / (MXS_PHY_TX_CAL45_MAX - MXS_PHY_TX_CAL45_MIN); + mxs_phy->tx_reg_mask |= GM_USBPHY_TX_TXCAL45DP(~0); + mxs_phy->tx_reg_set |= GM_USBPHY_TX_TXCAL45DP(val); + } + + if (!of_property_read_u32(np, "fsl,tx-d-cal", &val) && + val >= MXS_PHY_TX_D_CAL_MIN && val <= MXS_PHY_TX_D_CAL_MAX) { + /* Scale to a 4-bit value. Round up the values and heavily + * weight the rounding by adding 2/3 of the denominator. + */ + val = ((MXS_PHY_TX_D_CAL_MAX - val) * 0xF + + (MXS_PHY_TX_D_CAL_MAX - MXS_PHY_TX_D_CAL_MIN) * 2/3) + / (MXS_PHY_TX_D_CAL_MAX - MXS_PHY_TX_D_CAL_MIN); + mxs_phy->tx_reg_mask |= GM_USBPHY_TX_D_CAL(~0); + mxs_phy->tx_reg_set |= GM_USBPHY_TX_D_CAL(val); + } + ret = of_alias_get_id(np, "usbphy"); if (ret < 0) dev_dbg(&pdev->dev, "failed to get alias id, errno %d\n", ret); diff --git a/drivers/usb/renesas_usbhs/common.c b/drivers/usb/renesas_usbhs/common.c index ac67bab9124c..012a37aa3e0d 100644 --- a/drivers/usb/renesas_usbhs/common.c +++ b/drivers/usb/renesas_usbhs/common.c @@ -482,6 +482,10 @@ static const struct of_device_id usbhs_of_match[] = { .data = (void *)USBHS_TYPE_RCAR_GEN3, }, { + .compatible = "renesas,usbhs-r8a7796", + .data = (void *)USBHS_TYPE_RCAR_GEN3, + }, + { .compatible = "renesas,rcar-gen2-usbhs", .data = (void *)USBHS_TYPE_RCAR_GEN2, }, diff --git a/drivers/usb/renesas_usbhs/mod_gadget.c b/drivers/usb/renesas_usbhs/mod_gadget.c index 86b37a8eedd4..5bc7a6138855 100644 --- a/drivers/usb/renesas_usbhs/mod_gadget.c +++ b/drivers/usb/renesas_usbhs/mod_gadget.c @@ -1102,6 +1102,8 @@ int usbhs_mod_gadget_probe(struct usbhs_priv *priv) gpriv->gadget.name = "renesas_usbhs_udc"; gpriv->gadget.ops = &usbhsg_gadget_ops; gpriv->gadget.max_speed = USB_SPEED_HIGH; + gpriv->gadget.quirk_avoids_skb_reserve = usbhs_get_dparam(priv, + has_usb_dmac); INIT_LIST_HEAD(&gpriv->gadget.ep_list); diff --git a/include/linux/ulpi/driver.h b/include/linux/ulpi/driver.h index 80b36ca12e80..a7af21a55248 100644 --- a/include/linux/ulpi/driver.h +++ b/include/linux/ulpi/driver.h @@ -15,7 +15,7 @@ struct ulpi_ops; */ struct ulpi { struct ulpi_device_id id; - struct ulpi_ops *ops; + const struct ulpi_ops *ops; struct device dev; }; diff --git a/include/linux/ulpi/interface.h b/include/linux/ulpi/interface.h index 4de8ab491038..a2011a919eb6 100644 --- a/include/linux/ulpi/interface.h +++ b/include/linux/ulpi/interface.h @@ -4,20 +4,19 @@ #include <linux/types.h> struct ulpi; +struct device; /** * struct ulpi_ops - ULPI register access - * @dev: the interface provider * @read: read operation for ULPI register access * @write: write operation for ULPI register access */ struct ulpi_ops { - struct device *dev; - int (*read)(struct ulpi_ops *ops, u8 addr); - int (*write)(struct ulpi_ops *ops, u8 addr, u8 val); + int (*read)(struct device *dev, u8 addr); + int (*write)(struct device *dev, u8 addr, u8 val); }; -struct ulpi *ulpi_register_interface(struct device *, struct ulpi_ops *); +struct ulpi *ulpi_register_interface(struct device *, const struct ulpi_ops *); void ulpi_unregister_interface(struct ulpi *); #endif /* __LINUX_ULPI_INTERFACE_H */ diff --git a/include/linux/usb/composite.h b/include/linux/usb/composite.h index 2b81b24eb5aa..4616a49a1c2e 100644 --- a/include/linux/usb/composite.h +++ b/include/linux/usb/composite.h @@ -220,7 +220,8 @@ struct usb_function { int (*setup)(struct usb_function *, const struct usb_ctrlrequest *); bool (*req_match)(struct usb_function *, - const struct usb_ctrlrequest *); + const struct usb_ctrlrequest *, + bool config0); void (*suspend)(struct usb_function *); void (*resume)(struct usb_function *); diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h index 612dbdfa388e..8e81f9eb95e4 100644 --- a/include/linux/usb/gadget.h +++ b/include/linux/usb/gadget.h @@ -346,6 +346,8 @@ struct usb_gadget_ops { * or B-Peripheral wants to take host role. * @quirk_ep_out_aligned_size: epout requires buffer size to be aligned to * MaxPacketSize. + * @quirk_avoids_skb_reserve: udc/platform wants to avoid skb_reserve() in + * u_ether.c to improve performance. * @is_selfpowered: if the gadget is self-powered. * @deactivated: True if gadget is deactivated - in deactivated state it cannot * be connected. @@ -398,6 +400,7 @@ struct usb_gadget { unsigned quirk_altset_not_supp:1; unsigned quirk_stall_not_supp:1; unsigned quirk_zlp_not_supp:1; + unsigned quirk_avoids_skb_reserve:1; unsigned is_selfpowered:1; unsigned deactivated:1; unsigned connected:1; @@ -418,8 +421,20 @@ static inline struct usb_gadget *dev_to_usb_gadget(struct device *dev) list_for_each_entry(tmp, &(gadget)->ep_list, ep_list) /** + * usb_ep_align - returns @len aligned to ep's maxpacketsize. + * @ep: the endpoint whose maxpacketsize is used to align @len + * @len: buffer size's length to align to @ep's maxpacketsize + * + * This helper is used to align buffer's size to an ep's maxpacketsize. + */ +static inline size_t usb_ep_align(struct usb_ep *ep, size_t len) +{ + return round_up(len, (size_t)le16_to_cpu(ep->desc->wMaxPacketSize)); +} + +/** * usb_ep_align_maybe - returns @len aligned to ep's maxpacketsize if gadget - * requires quirk_ep_out_aligned_size, otherwise reguens len. + * requires quirk_ep_out_aligned_size, otherwise returns len. * @g: controller to check for quirk * @ep: the endpoint whose maxpacketsize is used to align @len * @len: buffer size's length to align to @ep's maxpacketsize @@ -430,8 +445,7 @@ static inline struct usb_gadget *dev_to_usb_gadget(struct device *dev) static inline size_t usb_ep_align_maybe(struct usb_gadget *g, struct usb_ep *ep, size_t len) { - return !g->quirk_ep_out_aligned_size ? len : - round_up(len, (size_t)ep->desc->wMaxPacketSize); + return g->quirk_ep_out_aligned_size ? usb_ep_align(ep, len) : len; } /** @@ -463,6 +477,16 @@ static inline int gadget_is_zlp_supported(struct usb_gadget *g) } /** + * gadget_avoids_skb_reserve - return true iff the hardware would like to avoid + * skb_reserve to improve performance. + * @g: controller to check for quirk + */ +static inline int gadget_avoids_skb_reserve(struct usb_gadget *g) +{ + return g->quirk_avoids_skb_reserve; +} + +/** * gadget_is_dualspeed - return true iff the hardware handles high speed * @g: controller that might support both high and full speeds */ diff --git a/include/uapi/linux/usb/functionfs.h b/include/uapi/linux/usb/functionfs.h index 108dd7997014..acc63697a0cc 100644 --- a/include/uapi/linux/usb/functionfs.h +++ b/include/uapi/linux/usb/functionfs.h @@ -21,6 +21,8 @@ enum functionfs_flags { FUNCTIONFS_HAS_MS_OS_DESC = 8, FUNCTIONFS_VIRTUAL_ADDR = 16, FUNCTIONFS_EVENTFD = 32, + FUNCTIONFS_ALL_CTRL_RECIP = 64, + FUNCTIONFS_CONFIG0_SETUP = 128, }; /* Descriptor of an non-audio endpoint */ |