diff options
| -rw-r--r-- | arch/arm/mach-u300/i2c.c | 51 | ||||
| -rw-r--r-- | arch/arm/mach-u300/include/mach/irqs.h | 7 | ||||
| -rw-r--r-- | drivers/mfd/Kconfig | 14 | ||||
| -rw-r--r-- | drivers/mfd/Makefile | 1 | ||||
| -rw-r--r-- | drivers/mfd/ab3550-core.c | 1380 | ||||
| -rw-r--r-- | include/linux/mfd/abx500.h | 48 |
6 files changed, 2 insertions, 1499 deletions
diff --git a/arch/arm/mach-u300/i2c.c b/arch/arm/mach-u300/i2c.c index f0394baa11fa..5140deeddf7b 100644 --- a/arch/arm/mach-u300/i2c.c +++ b/arch/arm/mach-u300/i2c.c @@ -256,57 +256,8 @@ static struct ab3100_platform_data ab3100_plf_data = { }; #endif -#ifdef CONFIG_AB3550_CORE -static struct abx500_init_settings ab3550_init_settings[] = { - { - .bank = 0, - .reg = AB3550_IMR1, - .setting = 0xff - }, - { - .bank = 0, - .reg = AB3550_IMR2, - .setting = 0xff - }, - { - .bank = 0, - .reg = AB3550_IMR3, - .setting = 0xff - }, - { - .bank = 0, - .reg = AB3550_IMR4, - .setting = 0xff - }, - { - .bank = 0, - .reg = AB3550_IMR5, - /* The two most significant bits are not used */ - .setting = 0x3f - }, -}; - -static struct ab3550_platform_data ab3550_plf_data = { - .irq = { - .base = IRQ_AB3550_BASE, - .count = (IRQ_AB3550_END - IRQ_AB3550_BASE + 1), - }, - .dev_data = { - }, - .init_settings = ab3550_init_settings, - .init_settings_sz = ARRAY_SIZE(ab3550_init_settings), -}; -#endif - static struct i2c_board_info __initdata bus0_i2c_board_info[] = { -#if defined(CONFIG_AB3550_CORE) - { - .type = "ab3550", - .addr = 0x4A, - .irq = IRQ_U300_IRQ0_EXT, - .platform_data = &ab3550_plf_data, - }, -#elif defined(CONFIG_AB3100_CORE) +#ifdef CONFIG_AB3100_CORE { .type = "ab3100", .addr = 0x48, diff --git a/arch/arm/mach-u300/include/mach/irqs.h b/arch/arm/mach-u300/include/mach/irqs.h index 09b1b28fa8fd..a6867b12773e 100644 --- a/arch/arm/mach-u300/include/mach/irqs.h +++ b/arch/arm/mach-u300/include/mach/irqs.h @@ -109,13 +109,6 @@ #define U300_NR_IRQS 48 #endif -#ifdef CONFIG_AB3550_CORE -#define IRQ_AB3550_BASE (U300_NR_IRQS) -#define IRQ_AB3550_END (IRQ_AB3550_BASE + 37) - -#define NR_IRQS (IRQ_AB3550_END + 1) -#else #define NR_IRQS U300_NR_IRQS -#endif #endif diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index f22bd2f0ecc3..74d4893a8f21 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -616,20 +616,6 @@ config AB8500_GPADC help AB8500 GPADC driver used to convert Acc and battery/ac/usb voltage -config AB3550_CORE - bool "ST-Ericsson AB3550 Mixed Signal Circuit core functions" - select MFD_CORE - depends on I2C=y && GENERIC_HARDIRQS && ABX500_CORE - help - Select this to enable the AB3550 Mixed Signal IC core - functionality. This connects to a AB3550 on the I2C bus - and expose a number of symbols needed for dependent devices - to read and write registers and subscribe to events from - this multi-functional IC. This is needed to use other features - of the AB3550 such as battery-backed RTC, charging control, - LEDs, vibrator, system power and temperature, power management - and ALSA sound. - config MFD_DB8500_PRCMU bool "ST-Ericsson DB8500 Power Reset Control Management Unit" depends on UX500_SOC_DB8500 diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index 7ed553d8157a..b2292eb75242 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -79,7 +79,6 @@ obj-$(CONFIG_PCF50633_GPIO) += pcf50633-gpio.o obj-$(CONFIG_ABX500_CORE) += abx500-core.o obj-$(CONFIG_AB3100_CORE) += ab3100-core.o obj-$(CONFIG_AB3100_OTP) += ab3100-otp.o -obj-$(CONFIG_AB3550_CORE) += ab3550-core.o obj-$(CONFIG_AB5500_CORE) += ab5500-core.o obj-$(CONFIG_AB5500_DEBUG) += ab5500-debugfs.o obj-$(CONFIG_AB8500_CORE) += ab8500-core.o ab8500-sysctrl.o diff --git a/drivers/mfd/ab3550-core.c b/drivers/mfd/ab3550-core.c deleted file mode 100644 index 882ea7192d8b..000000000000 --- a/drivers/mfd/ab3550-core.c +++ /dev/null @@ -1,1380 +0,0 @@ -/* - * Copyright (C) 2007-2010 ST-Ericsson - * License terms: GNU General Public License (GPL) version 2 - * Low-level core for exclusive access to the AB3550 IC on the I2C bus - * and some basic chip-configuration. - * Author: Bengt Jonsson <bengt.g.jonsson@stericsson.com> - * Author: Mattias Nilsson <mattias.i.nilsson@stericsson.com> - * Author: Mattias Wallin <mattias.wallin@stericsson.com> - * Author: Rickard Andersson <rickard.andersson@stericsson.com> - */ - -#include <linux/i2c.h> -#include <linux/mutex.h> -#include <linux/err.h> -#include <linux/platform_device.h> -#include <linux/slab.h> -#include <linux/device.h> -#include <linux/irq.h> -#include <linux/interrupt.h> -#include <linux/random.h> -#include <linux/workqueue.h> -#include <linux/debugfs.h> -#include <linux/seq_file.h> -#include <linux/uaccess.h> -#include <linux/mfd/abx500.h> -#include <linux/list.h> -#include <linux/bitops.h> -#include <linux/spinlock.h> -#include <linux/mfd/core.h> - -#define AB3550_NAME_STRING "ab3550" -#define AB3550_ID_FORMAT_STRING "AB3550 %s" -#define AB3550_NUM_BANKS 2 -#define AB3550_NUM_EVENT_REG 5 - -/* These are the only registers inside AB3550 used in this main file */ - -/* Chip ID register */ -#define AB3550_CID_REG 0x20 - -/* Interrupt event registers */ -#define AB3550_EVENT_BANK 0 -#define AB3550_EVENT_REG 0x22 - -/* Read/write operation values. */ -#define AB3550_PERM_RD (0x01) -#define AB3550_PERM_WR (0x02) - -/* Read/write permissions. */ -#define AB3550_PERM_RO (AB3550_PERM_RD) -#define AB3550_PERM_RW (AB3550_PERM_RD | AB3550_PERM_WR) - -/** - * struct ab3550 - * @access_mutex: lock out concurrent accesses to the AB registers - * @i2c_client: I2C client for this chip - * @chip_name: name of this chip variant - * @chip_id: 8 bit chip ID for this chip variant - * @mask_work: a worker for writing to mask registers - * @event_lock: a lock to protect the event_mask - * @event_mask: a local copy of the mask event registers - * @startup_events: a copy of the first reading of the event registers - * @startup_events_read: whether the first events have been read - */ -struct ab3550 { - struct mutex access_mutex; - struct i2c_client *i2c_client[AB3550_NUM_BANKS]; - char chip_name[32]; - u8 chip_id; - struct work_struct mask_work; - spinlock_t event_lock; - u8 event_mask[AB3550_NUM_EVENT_REG]; - u8 startup_events[AB3550_NUM_EVENT_REG]; - bool startup_events_read; -#ifdef CONFIG_DEBUG_FS - unsigned int debug_bank; - unsigned int debug_address; -#endif -}; - -/** - * struct ab3550_reg_range - * @first: the first address of the range - * @last: the last address of the range - * @perm: access permissions for the range - */ -struct ab3550_reg_range { - u8 first; - u8 last; - u8 perm; -}; - -/** - * struct ab3550_reg_ranges - * @count: the number of ranges in the list - * @range: the list of register ranges - */ -struct ab3550_reg_ranges { - u8 count; - const struct ab3550_reg_range *range; -}; - -/* - * Permissible register ranges for reading and writing per device and bank. - * - * The ranges must be listed in increasing address order, and no overlaps are - * allowed. It is assumed that write permission implies read permission - * (i.e. only RO and RW permissions should be used). Ranges with write - * permission must not be split up. - */ - -#define NO_RANGE {.count = 0, .range = NULL,} - -static struct -ab3550_reg_ranges ab3550_reg_ranges[AB3550_NUM_DEVICES][AB3550_NUM_BANKS] = { - [AB3550_DEVID_DAC] = { - NO_RANGE, - { - .count = 2, - .range = (struct ab3550_reg_range[]) { - { - .first = 0xb0, - .last = 0xba, - .perm = AB3550_PERM_RW, - }, - { - .first = 0xbc, - .last = 0xc3, - .perm = AB3550_PERM_RW, - }, - }, - }, - }, - [AB3550_DEVID_LEDS] = { - NO_RANGE, - { - .count = 2, - .range = (struct ab3550_reg_range[]) { - { - .first = 0x5a, - .last = 0x88, - .perm = AB3550_PERM_RW, - }, - { - .first = 0x8a, - .last = 0xad, - .perm = AB3550_PERM_RW, - }, - } - }, - }, - [AB3550_DEVID_POWER] = { - { - .count = 1, - .range = (struct ab3550_reg_range[]) { - { - .first = 0x21, - .last = 0x21, - .perm = AB3550_PERM_RO, - }, - } - }, - NO_RANGE, - }, - [AB3550_DEVID_REGULATORS] = { - { - .count = 1, - .range = (struct ab3550_reg_range[]) { - { - .first = 0x69, - .last = 0xa3, - .perm = AB3550_PERM_RW, - }, - } - }, - { - .count = 1, - .range = (struct ab3550_reg_range[]) { - { - .first = 0x14, - .last = 0x16, - .perm = AB3550_PERM_RW, - }, - } - }, - }, - [AB3550_DEVID_SIM] = { - { - .count = 1, - .range = (struct ab3550_reg_range[]) { - { - .first = 0x21, - .last = 0x21, - .perm = AB3550_PERM_RO, - }, - } - }, - { - .count = 1, - .range = (struct ab3550_reg_range[]) { - { - .first = 0x14, - .last = 0x17, - .perm = AB3550_PERM_RW, - }, - } - - }, - }, - [AB3550_DEVID_UART] = { - NO_RANGE, - NO_RANGE, - }, - [AB3550_DEVID_RTC] = { - { - .count = 1, - .range = (struct ab3550_reg_range[]) { - { - .first = 0x00, - .last = 0x0c, - .perm = AB3550_PERM_RW, - }, - } - }, - NO_RANGE, - }, - [AB3550_DEVID_CHARGER] = { - { - .count = 2, - .range = (struct ab3550_reg_range[]) { - { - .first = 0x10, - .last = 0x1a, - .perm = AB3550_PERM_RW, - }, - { - .first = 0x21, - .last = 0x21, - .perm = AB3550_PERM_RO, - }, - } - }, - NO_RANGE, - }, - [AB3550_DEVID_ADC] = { - NO_RANGE, - { - .count = 1, - .range = (struct ab3550_reg_range[]) { - { - .first = 0x20, - .last = 0x56, - .perm = AB3550_PERM_RW, - }, - - } - }, - }, - [AB3550_DEVID_FUELGAUGE] = { - { - .count = 1, - .range = (struct ab3550_reg_range[]) { - { - .first = 0x21, - .last = 0x21, - .perm = AB3550_PERM_RO, - }, - } - }, - { - .count = 1, - .range = (struct ab3550_reg_range[]) { - { - .first = 0x00, - .last = 0x0e, - .perm = AB3550_PERM_RW, - }, - } - }, - }, - [AB3550_DEVID_VIBRATOR] = { - NO_RANGE, - { - .count = 1, - .range = (struct ab3550_reg_range[]) { - { - .first = 0x10, - .last = 0x13, - .perm = AB3550_PERM_RW, - }, - - } - }, - }, - [AB3550_DEVID_CODEC] = { - { - .count = 2, - .range = (struct ab3550_reg_range[]) { - { - .first = 0x31, - .last = 0x63, - .perm = AB3550_PERM_RW, - }, - { - .first = 0x65, - .last = 0x68, - .perm = AB3550_PERM_RW, - }, - } - }, - NO_RANGE, - }, -}; - -static struct mfd_cell ab3550_devs[AB3550_NUM_DEVICES] = { - [AB3550_DEVID_DAC] = { - .name = "ab3550-dac", - .id = AB3550_DEVID_DAC, - .num_resources = 0, - }, - [AB3550_DEVID_LEDS] = { - .name = "ab3550-leds", - .id = AB3550_DEVID_LEDS, - }, - [AB3550_DEVID_POWER] = { - .name = "ab3550-power", - .id = AB3550_DEVID_POWER, - }, - [AB3550_DEVID_REGULATORS] = { - .name = "ab3550-regulators", - .id = AB3550_DEVID_REGULATORS, - }, - [AB3550_DEVID_SIM] = { - .name = "ab3550-sim", - .id = AB3550_DEVID_SIM, - }, - [AB3550_DEVID_UART] = { - .name = "ab3550-uart", - .id = AB3550_DEVID_UART, - }, - [AB3550_DEVID_RTC] = { - .name = "ab3550-rtc", - .id = AB3550_DEVID_RTC, - }, - [AB3550_DEVID_CHARGER] = { - .name = "ab3550-charger", - .id = AB3550_DEVID_CHARGER, - }, - [AB3550_DEVID_ADC] = { - .name = "ab3550-adc", - .id = AB3550_DEVID_ADC, - .num_resources = 10, - .resources = (struct resource[]) { - { - .name = "TRIGGER-0", - .flags = IORESOURCE_IRQ, - .start = 16, - .end = 16, - }, - { - .name = "TRIGGER-1", - .flags = IORESOURCE_IRQ, - .start = 17, - .end = 17, - }, - { - .name = "TRIGGER-2", - .flags = IORESOURCE_IRQ, - .start = 18, - .end = 18, - }, - { - .name = "TRIGGER-3", - .flags = IORESOURCE_IRQ, - .start = 19, - .end = 19, - }, - { - .name = "TRIGGER-4", - .flags = IORESOURCE_IRQ, - .start = 20, - .end = 20, - }, - { - .name = "TRIGGER-5", - .flags = IORESOURCE_IRQ, - .start = 21, - .end = 21, - }, - { - .name = "TRIGGER-6", - .flags = IORESOURCE_IRQ, - .start = 22, - .end = 22, - }, - { - .name = "TRIGGER-7", - .flags = IORESOURCE_IRQ, - .start = 23, - .end = 23, - }, - { - .name = "TRIGGER-VBAT-TXON", - .flags = IORESOURCE_IRQ, - .start = 13, - .end = 13, - }, - { - .name = "TRIGGER-VBAT", - .flags = IORESOURCE_IRQ, - .start = 12, - .end = 12, - }, - }, - }, - [AB3550_DEVID_FUELGAUGE] = { - .name = "ab3550-fuelgauge", - .id = AB3550_DEVID_FUELGAUGE, - }, - [AB3550_DEVID_VIBRATOR] = { - .name = "ab3550-vibrator", - .id = AB3550_DEVID_VIBRATOR, - }, - [AB3550_DEVID_CODEC] = { - .name = "ab3550-codec", - .id = AB3550_DEVID_CODEC, - }, -}; - -/* - * I2C transactions with error messages. - */ -static int ab3550_i2c_master_send(struct ab3550 *ab, u8 bank, u8 *data, - u8 count) -{ - int err; - - err = i2c_master_send(ab->i2c_client[bank], data, count); - if (err < 0) { - dev_err(&ab->i2c_client[0]->dev, "send error: %d\n", err); - return err; - } - return 0; -} - -static int ab3550_i2c_master_recv(struct ab3550 *ab, u8 bank, u8 *data, - u8 count) -{ - int err; - - err = i2c_master_recv(ab->i2c_client[bank], data, count); - if (err < 0) { - dev_err(&ab->i2c_client[0]->dev, "receive error: %d\n", err); - return err; - } - return 0; -} - -/* - * Functionality for getting/setting register values. - */ -static int get_register_interruptible(struct ab3550 *ab, u8 bank, u8 reg, - u8 *value) -{ - int err; - - err = mutex_lock_interruptible(&ab->access_mutex); - if (err) - return err; - - err = ab3550_i2c_master_send(ab, bank, ®, 1); - if (!err) - err = ab3550_i2c_master_recv(ab, bank, value, 1); - - mutex_unlock(&ab->access_mutex); - return err; -} - -static int get_register_page_interruptible(struct ab3550 *ab, u8 bank, - u8 first_reg, u8 *regvals, u8 numregs) -{ - int err; - - err = mutex_lock_interruptible(&ab->access_mutex); - if (err) - return err; - - err = ab3550_i2c_master_send(ab, bank, &first_reg, 1); - if (!err) - err = ab3550_i2c_master_recv(ab, bank, regvals, numregs); - - mutex_unlock(&ab->access_mutex); - return err; -} - -static int mask_and_set_register_interruptible(struct ab3550 *ab, u8 bank, - u8 reg, u8 bitmask, u8 bitvalues) -{ - int err = 0; - - if (likely(bitmask)) { - u8 reg_bits[2] = {reg, 0}; - - err = mutex_lock_interruptible(&ab->access_mutex); - if (err) - return err; - - if (bitmask == 0xFF) /* No need to read in this case. */ - reg_bits[1] = bitvalues; - else { /* Read and modify the register value. */ - u8 bits; - - err = ab3550_i2c_master_send(ab, bank, ®, 1); - if (err) - goto unlock_and_return; - err = ab3550_i2c_master_recv(ab, bank, &bits, 1); - if (err) - goto unlock_and_return; - reg_bits[1] = ((~bitmask & bits) | - (bitmask & bitvalues)); - } - /* Write the new value. */ - err = ab3550_i2c_master_send(ab, bank, reg_bits, 2); -unlock_and_return: - mutex_unlock(&ab->access_mutex); - } - return err; -} - -/* - * Read/write permission checking functions. - */ -static bool page_write_allowed(const struct ab3550_reg_ranges *ranges, - u8 first_reg, u8 last_reg) -{ - u8 i; - - if (last_reg < first_reg) - return false; - - for (i = 0; i < ranges->count; i++) { - if (first_reg < ranges->range[i].first) - break; - if ((last_reg <= ranges->range[i].last) && - (ranges->range[i].perm & AB3550_PERM_WR)) - return true; - } - return false; -} - -static bool reg_write_allowed(const struct ab3550_reg_ranges *ranges, u8 reg) -{ - return page_write_allowed(ranges, reg, reg); -} - -static bool page_read_allowed(const struct ab3550_reg_ranges *ranges, - u8 first_reg, u8 last_reg) -{ - u8 i; - - if (last_reg < first_reg) - return false; - /* Find the range (if it exists in the list) that includes first_reg. */ - for (i = 0; i < ranges->count; i++) { - if (first_reg < ranges->range[i].first) - return false; - if (first_reg <= ranges->range[i].last) - break; - } - /* Make sure that the entire range up to and including last_reg is - * readable. This may span several of the ranges in the list. - */ - while ((i < ranges->count) && - (ranges->range[i].perm & AB3550_PERM_RD)) { - if (last_reg <= ranges->range[i].last) - return true; - if ((++i >= ranges->count) || - (ranges->range[i].first != - (ranges->range[i - 1].last + 1))) { - break; - } - } - return false; -} - -static bool reg_read_allowed(const struct ab3550_reg_ranges *ranges, u8 reg) -{ - return page_read_allowed(ranges, reg, reg); -} - -/* - * The register access functionality. - */ -static int ab3550_get_chip_id(struct device *dev) -{ - struct ab3550 *ab = dev_get_drvdata(dev->parent); - return (int)ab->chip_id; -} - -static int ab3550_mask_and_set_register_interruptible(struct device *dev, - u8 bank, u8 reg, u8 bitmask, u8 bitvalues) -{ - struct ab3550 *ab; - struct platform_device *pdev = to_platform_device(dev); - - if ((AB3550_NUM_BANKS <= bank) || - !reg_write_allowed(&ab3550_reg_ranges[pdev->id][bank], reg)) - return -EINVAL; - - ab = dev_get_drvdata(dev->parent); - return mask_and_set_register_interruptible(ab, bank, reg, - bitmask, bitvalues); -} - -static int ab3550_set_register_interruptible(struct device *dev, u8 bank, - u8 reg, u8 value) -{ - return ab3550_mask_and_set_register_interruptible(dev, bank, reg, 0xFF, - value); -} - -static int ab3550_get_register_interruptible(struct device *dev, u8 bank, - u8 reg, u8 *value) -{ - struct ab3550 *ab; - struct platform_device *pdev = to_platform_device(dev); - - if ((AB3550_NUM_BANKS <= bank) || - !reg_read_allowed(&ab3550_reg_ranges[pdev->id][bank], reg)) - return -EINVAL; - - ab = dev_get_drvdata(dev->parent); - return get_register_interruptible(ab, bank, reg, value); -} - -static int ab3550_get_register_page_interruptible(struct device *dev, u8 bank, - u8 first_reg, u8 *regvals, u8 numregs) -{ - struct ab3550 *ab; - struct platform_device *pdev = to_platform_device(dev); - - if ((AB3550_NUM_BANKS <= bank) || - !page_read_allowed(&ab3550_reg_ranges[pdev->id][bank], - first_reg, (first_reg + numregs - 1))) - return -EINVAL; - - ab = dev_get_drvdata(dev->parent); - return get_register_page_interruptible(ab, bank, first_reg, regvals, - numregs); -} - -static int ab3550_event_registers_startup_state_get(struct device *dev, - u8 *event) -{ - struct ab3550 *ab; - - ab = dev_get_drvdata(dev->parent); - if (!ab->startup_events_read) - return -EAGAIN; /* Try again later */ - - memcpy(event, ab->startup_events, AB3550_NUM_EVENT_REG); - return 0; -} - -static int ab3550_startup_irq_enabled(struct device *dev, unsigned int irq) -{ - struct ab3550 *ab; - struct ab3550_platform_data *plf_data; - bool val; - - ab = irq_get_chip_data(irq); - plf_data = ab->i2c_client[0]->dev.platform_data; - irq -= plf_data->irq.base; - val = ((ab->startup_events[irq / 8] & BIT(irq % 8)) != 0); - - return val; -} - -static struct abx500_ops ab3550_ops = { - .get_chip_id = ab3550_get_chip_id, - .get_register = ab3550_get_register_interruptible, - .set_register = ab3550_set_register_interruptible, - .get_register_page = ab3550_get_register_page_interruptible, - .set_register_page = NULL, - .mask_and_set_register = ab3550_mask_and_set_register_interruptible, - .event_registers_startup_state_get = - ab3550_event_registers_startup_state_get, - .startup_irq_enabled = ab3550_startup_irq_enabled, -}; - -static irqreturn_t ab3550_irq_handler(int irq, void *data) -{ - struct ab3550 *ab = data; - int err; - unsigned int i; - u8 e[AB3550_NUM_EVENT_REG]; - u8 *events; - unsigned long flags; - - events = (ab->startup_events_read ? e : ab->startup_events); - - err = get_register_page_interruptible(ab, AB3550_EVENT_BANK, - AB3550_EVENT_REG, events, AB3550_NUM_EVENT_REG); - if (err) - goto err_event_rd; - - if (!ab->startup_events_read) { - dev_info(&ab->i2c_client[0]->dev, - "startup events 0x%x,0x%x,0x%x,0x%x,0x%x\n", - ab->startup_events[0], ab->startup_events[1], - ab->startup_events[2], ab->startup_events[3], - ab->startup_events[4]); - ab->startup_events_read = true; - goto out; - } - - /* The two highest bits in event[4] are not used. */ - events[4] &= 0x3f; - - spin_lock_irqsave(&ab->event_lock, flags); - for (i = 0; i < AB3550_NUM_EVENT_REG; i++) - events[i] &= ~ab->event_mask[i]; - spin_unlock_irqrestore(&ab->event_lock, flags); - - for (i = 0; i < AB3550_NUM_EVENT_REG; i++) { - u8 bit; - u8 event_reg; - - dev_dbg(&ab->i2c_client[0]->dev, "IRQ Event[%d]: 0x%2x\n", - i, events[i]); - - event_reg = events[i]; - for (bit = 0; event_reg; bit++, event_reg /= 2) { - if (event_reg % 2) { - unsigned int irq; - struct ab3550_platform_data *plf_data; - - plf_data = ab->i2c_client[0]->dev.platform_data; - irq = plf_data->irq.base + (i * 8) + bit; - handle_nested_irq(irq); - } - } - } -out: - return IRQ_HANDLED; - -err_event_rd: - dev_dbg(&ab->i2c_client[0]->dev, "error reading event registers\n"); - return IRQ_HANDLED; -} - -#ifdef CONFIG_DEBUG_FS -static struct ab3550_reg_ranges debug_ranges[AB3550_NUM_BANKS] = { - { - .count = 6, - .range = (struct ab3550_reg_range[]) { - { - .first = 0x00, - .last = 0x0e, - }, - { - .first = 0x10, - .last = 0x1a, - }, - { - .first = 0x1e, - .last = 0x4f, - }, - { - .first = 0x51, - .last = 0x63, - }, - { - .first = 0x65, - .last = 0xa3, - }, - { - .first = 0xa5, - .last = 0xa8, - }, - } - }, - { - .count = 8, - .range = (struct ab3550_reg_range[]) { - { - .first = 0x00, - .last = 0x0e, - }, - { - .first = 0x10, - .last = 0x17, - }, - { - .first = 0x1a, - .last = 0x1c, - }, - { - .first = 0x20, - .last = 0x56, - }, - { - .first = 0x5a, - .last = 0x88, - }, - { - .first = 0x8a, - .last = 0xad, - }, - { - .first = 0xb0, - .last = 0xba, - }, - { - .first = 0xbc, - .last = 0xc3, - }, - } - }, -}; - -static int ab3550_registers_print(struct seq_file *s, void *p) -{ - struct ab3550 *ab = s->private; - int bank; - - seq_printf(s, AB3550_NAME_STRING " register values:\n"); - - for (bank = 0; bank < AB3550_NUM_BANKS; bank++) { - unsigned int i; - - seq_printf(s, " bank %d:\n", bank); - for (i = 0; i < debug_ranges[bank].count; i++) { - u8 reg; - - for (reg = debug_ranges[bank].range[i].first; - reg <= debug_ranges[bank].range[i].last; - reg++) { - u8 value; - - get_register_interruptible(ab, bank, reg, - &value); - seq_printf(s, " [%d/0x%02X]: 0x%02X\n", bank, - reg, value); - } - } - } - return 0; -} - -static int ab3550_registers_open(struct inode *inode, struct file *file) -{ - return single_open(file, ab3550_registers_print, inode->i_private); -} - -static const struct file_operations ab3550_registers_fops = { - .open = ab3550_registers_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, - .owner = THIS_MODULE, -}; - -static int ab3550_bank_print(struct seq_file *s, void *p) -{ - struct ab3550 *ab = s->private; - - seq_printf(s, "%d\n", ab->debug_bank); - return 0; -} - -static int ab3550_bank_open(struct inode *inode, struct file *file) -{ - return single_open(file, ab3550_bank_print, inode->i_private); -} - -static ssize_t ab3550_bank_write(struct file *file, - const char __user *user_buf, - size_t count, loff_t *ppos) -{ - struct ab3550 *ab = ((struct seq_file *)(file->private_data))->private; - unsigned long user_bank; - int err; - - /* Get userspace string and assure termination */ - err = kstrtoul_from_user(user_buf, count, 0, &user_bank); - if (err) - return err; - - if (user_bank >= AB3550_NUM_BANKS) { - dev_err(&ab->i2c_client[0]->dev, - "debugfs error input > number of banks\n"); - return -EINVAL; - } - - ab->debug_bank = user_bank; - - return count; -} - -static int ab3550_address_print(struct seq_file *s, void *p) -{ - struct ab3550 *ab = s->private; - - seq_printf(s, "0x%02X\n", ab->debug_address); - return 0; -} - -static int ab3550_address_open(struct inode *inode, struct file *file) -{ - return single_open(file, ab3550_address_print, inode->i_private); -} - -static ssize_t ab3550_address_write(struct file *file, - const char __user *user_buf, - size_t count, loff_t *ppos) -{ - struct ab3550 *ab = ((struct seq_file *)(file->private_data))->private; - unsigned long user_address; - int err; - - /* Get userspace string and assure termination */ - err = kstrtoul_from_user(user_buf, count, 0, &user_address); - if (err) - return err; - - if (user_address > 0xff) { - dev_err(&ab->i2c_client[0]->dev, - "debugfs error input > 0xff\n"); - return -EINVAL; - } - ab->debug_address = user_address; - return count; -} - -static int ab3550_val_print(struct seq_file *s, void *p) -{ - struct ab3550 *ab = s->private; - int err; - u8 regvalue; - - err = get_register_interruptible(ab, (u8)ab->debug_bank, - (u8)ab->debug_address, ®value); - if (err) - return -EINVAL; - seq_printf(s, "0x%02X\n", regvalue); - - return 0; -} - -static int ab3550_val_open(struct inode *inode, struct file *file) -{ - return single_open(file, ab3550_val_print, inode->i_private); -} - -static ssize_t ab3550_val_write(struct file *file, - const char __user *user_buf, - size_t count, loff_t *ppos) -{ - struct ab3550 *ab = ((struct seq_file *)(file->private_data))->private; - unsigned long user_val; - int err; - u8 regvalue; - - /* Get userspace string and assure termination */ - err = kstrtoul_from_user(user_buf, count, 0, &user_val); - if (err) - return err; - - if (user_val > 0xff) { - dev_err(&ab->i2c_client[0]->dev, - "debugfs error input > 0xff\n"); - return -EINVAL; - } - err = mask_and_set_register_interruptible( - ab, (u8)ab->debug_bank, - (u8)ab->debug_address, 0xFF, (u8)user_val); - if (err) - return -EINVAL; - - get_register_interruptible(ab, (u8)ab->debug_bank, - (u8)ab->debug_address, ®value); - if (err) - return -EINVAL; - - return count; -} - -static const struct file_operations ab3550_bank_fops = { - .open = ab3550_bank_open, - .write = ab3550_bank_write, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, - .owner = THIS_MODULE, -}; - -static const struct file_operations ab3550_address_fops = { - .open = ab3550_address_open, - .write = ab3550_address_write, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, - .owner = THIS_MODULE, -}; - -static const struct file_operations ab3550_val_fops = { - .open = ab3550_val_open, - .write = ab3550_val_write, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, - .owner = THIS_MODULE, -}; - -static struct dentry *ab3550_dir; -static struct dentry *ab3550_reg_file; -static struct dentry *ab3550_bank_file; -static struct dentry *ab3550_address_file; -static struct dentry *ab3550_val_file; - -static inline void ab3550_setup_debugfs(struct ab3550 *ab) -{ - ab->debug_bank = 0; - ab->debug_address = 0x00; - - ab3550_dir = debugfs_create_dir(AB3550_NAME_STRING, NULL); - if (!ab3550_dir) - goto exit_no_debugfs; - - ab3550_reg_file = debugfs_create_file("all-registers", - S_IRUGO, ab3550_dir, ab, &ab3550_registers_fops); - if (!ab3550_reg_file) - goto exit_destroy_dir; - - ab3550_bank_file = debugfs_create_file("register-bank", - (S_IRUGO | S_IWUSR), ab3550_dir, ab, &ab3550_bank_fops); - if (!ab3550_bank_file) - goto exit_destroy_reg; - - ab3550_address_file = debugfs_create_file("register-address", - (S_IRUGO | S_IWUSR), ab3550_dir, ab, &ab3550_address_fops); - if (!ab3550_address_file) - goto exit_destroy_bank; - - ab3550_val_file = debugfs_create_file("register-value", - (S_IRUGO | S_IWUSR), ab3550_dir, ab, &ab3550_val_fops); - if (!ab3550_val_file) - goto exit_destroy_address; - - return; - -exit_destroy_address: - debugfs_remove(ab3550_address_file); -exit_destroy_bank: - debugfs_remove(ab3550_bank_file); -exit_destroy_reg: - debugfs_remove(ab3550_reg_file); -exit_destroy_dir: - debugfs_remove(ab3550_dir); -exit_no_debugfs: - dev_err(&ab->i2c_client[0]->dev, "failed to create debugfs entries.\n"); - return; -} - -static inline void ab3550_remove_debugfs(void) -{ - debugfs_remove(ab3550_val_file); - debugfs_remove(ab3550_address_file); - debugfs_remove(ab3550_bank_file); - debugfs_remove(ab3550_reg_file); - debugfs_remove(ab3550_dir); -} - -#else /* !CONFIG_DEBUG_FS */ -static inline void ab3550_setup_debugfs(struct ab3550 *ab) -{ -} -static inline void ab3550_remove_debugfs(void) -{ -} -#endif - -/* - * Basic set-up, datastructure creation/destruction and I2C interface. - * This sets up a default config in the AB3550 chip so that it - * will work as expected. - */ -static int __devinit ab3550_setup(struct ab3550 *ab) -{ - int err = 0; - int i; - struct ab3550_platform_data *plf_data; - struct abx500_init_settings *settings; - - plf_data = ab->i2c_client[0]->dev.platform_data; - settings = plf_data->init_settings; - - for (i = 0; i < plf_data->init_settings_sz; i++) { - err = mask_and_set_register_interruptible(ab, - settings[i].bank, - settings[i].reg, - 0xFF, settings[i].setting); - if (err) - goto exit_no_setup; - - /* If event mask register update the event mask in ab3550 */ - if ((settings[i].bank == 0) && - (AB3550_IMR1 <= settings[i].reg) && - (settings[i].reg <= AB3550_IMR5)) { - ab->event_mask[settings[i].reg - AB3550_IMR1] = - settings[i].setting; - } - } -exit_no_setup: - return err; -} - -static void ab3550_mask_work(struct work_struct *work) -{ - struct ab3550 *ab = container_of(work, struct ab3550, mask_work); - int i; - unsigned long flags; - u8 mask[AB3550_NUM_EVENT_REG]; - - spin_lock_irqsave(&ab->event_lock, flags); - for (i = 0; i < AB3550_NUM_EVENT_REG; i++) - mask[i] = ab->event_mask[i]; - spin_unlock_irqrestore(&ab->event_lock, flags); - - for (i = 0; i < AB3550_NUM_EVENT_REG; i++) { - int err; - - err = mask_and_set_register_interruptible(ab, 0, - (AB3550_IMR1 + i), ~0, mask[i]); - if (err) - dev_err(&ab->i2c_client[0]->dev, - "ab3550_mask_work failed 0x%x,0x%x\n", - (AB3550_IMR1 + i), mask[i]); - } -} - -static void ab3550_mask(struct irq_data *data) -{ - unsigned long flags; - struct ab3550 *ab; - struct ab3550_platform_data *plf_data; - int irq; - - ab = irq_data_get_irq_chip_data(data); - plf_data = ab->i2c_client[0]->dev.platform_data; - irq = data->irq - plf_data->irq.base; - - spin_lock_irqsave(&ab->event_lock, flags); - ab->event_mask[irq / 8] |= BIT(irq % 8); - spin_unlock_irqrestore(&ab->event_lock, flags); - - schedule_work(&ab->mask_work); -} - -static void ab3550_unmask(struct irq_data *data) -{ - unsigned long flags; - struct ab3550 *ab; - struct ab3550_platform_data *plf_data; - int irq; - - ab = irq_data_get_irq_chip_data(data); - plf_data = ab->i2c_client[0]->dev.platform_data; - irq = data->irq - plf_data->irq.base; - - spin_lock_irqsave(&ab->event_lock, flags); - ab->event_mask[irq / 8] &= ~BIT(irq % 8); - spin_unlock_irqrestore(&ab->event_lock, flags); - - schedule_work(&ab->mask_work); -} - -static void noop(struct irq_data *data) -{ -} - -static struct irq_chip ab3550_irq_chip = { - .name = "ab3550-core", /* Keep the same name as the request */ - .irq_disable = ab3550_mask, /* No default to mask in chip.c */ - .irq_ack = noop, - .irq_mask = ab3550_mask, - .irq_unmask = ab3550_unmask, -}; - -struct ab_family_id { - u8 id; - char *name; -}; - -static const struct ab_family_id ids[] __devinitconst = { - /* AB3550 */ - { - .id = AB3550_P1A, - .name = "P1A" - }, - /* Terminator */ - { - .id = 0x00, - } -}; - -static int __devinit ab3550_probe(struct i2c_client *client, - const struct i2c_device_id *id) -{ - struct ab3550 *ab; - struct ab3550_platform_data *ab3550_plf_data = - client->dev.platform_data; - int err; - int i; - int num_i2c_clients = 0; - - ab = kzalloc(sizeof(struct ab3550), GFP_KERNEL); - if (!ab) { - dev_err(&client->dev, - "could not allocate " AB3550_NAME_STRING " device\n"); - return -ENOMEM; - } - - /* Initialize data structure */ - mutex_init(&ab->access_mutex); - spin_lock_init(&ab->event_lock); - ab->i2c_client[0] = client; - - i2c_set_clientdata(client, ab); - - /* Read chip ID register */ - err = get_register_interruptible(ab, 0, AB3550_CID_REG, &ab->chip_id); - if (err) { - dev_err(&client->dev, "could not communicate with the analog " - "baseband chip\n"); - goto exit_no_detect; - } - - for (i = 0; ids[i].id != 0x0; i++) { - if (ids[i].id == ab->chip_id) { - snprintf(&ab->chip_name[0], sizeof(ab->chip_name) - 1, - AB3550_ID_FORMAT_STRING, ids[i].name); - break; - } - } - - if (ids[i].id == 0x0) { - dev_err(&client->dev, "unknown analog baseband chip id: 0x%x\n", - ab->chip_id); - dev_err(&client->dev, "driver not started!\n"); - goto exit_no_detect; - } - - dev_info(&client->dev, "detected AB chip: %s\n", &ab->chip_name[0]); - - /* Attach other dummy I2C clients. */ - while (++num_i2c_clients < AB3550_NUM_BANKS) { - ab->i2c_client[num_i2c_clients] = - i2c_new_dummy(client->adapter, - (client->addr + num_i2c_clients)); - if (!ab->i2c_client[num_i2c_clients]) { - err = -ENOMEM; - goto exit_no_dummy_client; - } - strlcpy(ab->i2c_client[num_i2c_clients]->name, id->name, - sizeof(ab->i2c_client[num_i2c_clients]->name)); - } - - err = ab3550_setup(ab); - if (err) - goto exit_no_setup; - - INIT_WORK(&ab->mask_work, ab3550_mask_work); - - for (i = 0; i < ab3550_plf_data->irq.count; i++) { - unsigned int irq; - - irq = ab3550_plf_data->irq.base + i; - irq_set_chip_data(irq, ab); - irq_set_chip_and_handler(irq, &ab3550_irq_chip, - handle_simple_irq); - irq_set_nested_thread(irq, 1); -#ifdef CONFIG_ARM - set_irq_flags(irq, IRQF_VALID); -#else - irq_set_noprobe(irq); -#endif - } - - err = request_threaded_irq(client->irq, NULL, ab3550_irq_handler, - IRQF_ONESHOT, "ab3550-core", ab); - /* This real unpredictable IRQ is of course sampled for entropy */ - rand_initialize_irq(client->irq); - - if (err) - goto exit_no_irq; - - err = abx500_register_ops(&client->dev, &ab3550_ops); - if (err) - goto exit_no_ops; - - /* Set up and register the platform devices. */ - for (i = 0; i < AB3550_NUM_DEVICES; i++) { - ab3550_devs[i].platform_data = ab3550_plf_data->dev_data[i]; - ab3550_devs[i].pdata_size = ab3550_plf_data->dev_data_sz[i]; - } - - err = mfd_add_devices(&client->dev, 0, ab3550_devs, - ARRAY_SIZE(ab3550_devs), NULL, - ab3550_plf_data->irq.base); - - ab3550_setup_debugfs(ab); - - return 0; - -exit_no_ops: -exit_no_irq: -exit_no_setup: -exit_no_dummy_client: - /* Unregister the dummy i2c clients. */ - while (--num_i2c_clients) - i2c_unregister_device(ab->i2c_client[num_i2c_clients]); -exit_no_detect: - kfree(ab); - return err; -} - -static int __devexit ab3550_remove(struct i2c_client *client) -{ - struct ab3550 *ab = i2c_get_clientdata(client); - int num_i2c_clients = AB3550_NUM_BANKS; - - mfd_remove_devices(&client->dev); - ab3550_remove_debugfs(); - - while (--num_i2c_clients) - i2c_unregister_device(ab->i2c_client[num_i2c_clients]); - - /* - * At this point, all subscribers should have unregistered - * their notifiers so deactivate IRQ - */ - free_irq(client->irq, ab); - kfree(ab); - return 0; -} - -static const struct i2c_device_id ab3550_id[] = { - {AB3550_NAME_STRING, 0}, - {} -}; -MODULE_DEVICE_TABLE(i2c, ab3550_id); - -static struct i2c_driver ab3550_driver = { - .driver = { - .name = AB3550_NAME_STRING, - .owner = THIS_MODULE, - }, - .id_table = ab3550_id, - .probe = ab3550_probe, - .remove = __devexit_p(ab3550_remove), -}; - -static int __init ab3550_i2c_init(void) -{ - return i2c_add_driver(&ab3550_driver); -} - -static void __exit ab3550_i2c_exit(void) -{ - i2c_del_driver(&ab3550_driver); -} - -subsys_initcall(ab3550_i2c_init); -module_exit(ab3550_i2c_exit); - -MODULE_AUTHOR("Mattias Wallin <mattias.wallin@stericsson.com>"); -MODULE_DESCRIPTION("AB3550 core driver"); -MODULE_LICENSE("GPL"); diff --git a/include/linux/mfd/abx500.h b/include/linux/mfd/abx500.h index 79ec2c7b5fab..6d096e8b7746 100644 --- a/include/linux/mfd/abx500.h +++ b/include/linux/mfd/abx500.h @@ -6,7 +6,7 @@ * * ABX500 core access functions. * The abx500 interface is used for the Analog Baseband chip - * ab3100, ab3550, ab5500, and ab8500. + * ab3100, ab5500, and ab8500. * * Author: Mattias Wallin <mattias.wallin@stericsson.com> * Author: Mattias Nilsson <mattias.i.nilsson@stericsson.com> @@ -29,7 +29,6 @@ #define AB3100_P1G 0xc6 #define AB3100_R2A 0xc7 #define AB3100_R2B 0xc8 -#define AB3550_P1A 0x10 #define AB5500_1_0 0x20 #define AB5500_1_1 0x21 #define AB5500_2_0 0x24 @@ -143,39 +142,6 @@ int ab3100_event_register(struct ab3100 *ab3100, int ab3100_event_unregister(struct ab3100 *ab3100, struct notifier_block *nb); -/* AB3550, STR register flags */ -#define AB3550_STR_ONSWA (0x01) -#define AB3550_STR_ONSWB (0x02) -#define AB3550_STR_ONSWC (0x04) -#define AB3550_STR_DCIO (0x08) -#define AB3550_STR_BOOT_MODE (0x10) -#define AB3550_STR_SIM_OFF (0x20) -#define AB3550_STR_BATT_REMOVAL (0x40) -#define AB3550_STR_VBUS (0x80) - -/* Interrupt mask registers */ -#define AB3550_IMR1 0x29 -#define AB3550_IMR2 0x2a -#define AB3550_IMR3 0x2b -#define AB3550_IMR4 0x2c -#define AB3550_IMR5 0x2d - -enum ab3550_devid { - AB3550_DEVID_ADC, - AB3550_DEVID_DAC, - AB3550_DEVID_LEDS, - AB3550_DEVID_POWER, - AB3550_DEVID_REGULATORS, - AB3550_DEVID_SIM, - AB3550_DEVID_UART, - AB3550_DEVID_RTC, - AB3550_DEVID_CHARGER, - AB3550_DEVID_FUELGAUGE, - AB3550_DEVID_VIBRATOR, - AB3550_DEVID_CODEC, - AB3550_NUM_DEVICES, -}; - /** * struct abx500_init_setting * Initial value of the registers for driver to use during setup. @@ -186,18 +152,6 @@ struct abx500_init_settings { u8 setting; }; -/** - * struct ab3550_platform_data - * Data supplied to initialize board connections to the AB3550 - */ -struct ab3550_platform_data { - struct {unsigned int base; unsigned int count; } irq; - void *dev_data[AB3550_NUM_DEVICES]; - size_t dev_data_sz[AB3550_NUM_DEVICES]; - struct abx500_init_settings *init_settings; - unsigned int init_settings_sz; -}; - int abx500_set_register_interruptible(struct device *dev, u8 bank, u8 reg, u8 value); int abx500_get_register_interruptible(struct device *dev, u8 bank, u8 reg, |