diff options
| -rw-r--r-- | drivers/power/supply/max17042_battery.c | 60 | ||||
| -rw-r--r-- | include/linux/power/max17042_battery.h | 6 |
2 files changed, 58 insertions, 8 deletions
diff --git a/drivers/power/supply/max17042_battery.c b/drivers/power/supply/max17042_battery.c index a51b2965cd5c..f0ff6e880ff2 100644 --- a/drivers/power/supply/max17042_battery.c +++ b/drivers/power/supply/max17042_battery.c @@ -150,12 +150,12 @@ static int max17042_get_battery_health(struct max17042_chip *chip, int *health) if (ret < 0) goto health_error; - if (temp <= chip->pdata->temp_min) { + if (temp < chip->pdata->temp_min) { *health = POWER_SUPPLY_HEALTH_COLD; goto out; } - if (temp >= chip->pdata->temp_max) { + if (temp > chip->pdata->temp_max) { *health = POWER_SUPPLY_HEALTH_OVERHEAT; goto out; } @@ -772,8 +772,9 @@ static void max17042_init_worker(struct work_struct *work) #ifdef CONFIG_OF static struct max17042_platform_data * -max17042_get_pdata(struct device *dev) +max17042_get_pdata(struct max17042_chip *chip) { + struct device *dev = &chip->client->dev; struct device_node *np = dev->of_node; u32 prop; struct max17042_platform_data *pdata; @@ -806,10 +807,55 @@ max17042_get_pdata(struct device *dev) return pdata; } #else +static struct max17042_reg_data max17047_default_pdata_init_regs[] = { + /* + * Some firmwares do not set FullSOCThr, Enable End-of-Charge Detection + * when the voltage FG reports 95%, as recommended in the datasheet. + */ + { MAX17047_FullSOCThr, MAX17042_BATTERY_FULL << 8 }, +}; + static struct max17042_platform_data * -max17042_get_pdata(struct device *dev) +max17042_get_pdata(struct max17042_chip *chip) { - return dev->platform_data; + struct device *dev = &chip->client->dev; + struct max17042_platform_data *pdata; + int ret, misc_cfg; + + if (dev->platform_data) + return dev->platform_data; + + /* + * The MAX17047 gets used on x86 where we might not have pdata, assume + * the firmware will already have initialized the fuel-gauge and provide + * default values for the non init bits to make things work. + */ + pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) + return pdata; + + if (chip->chip_type != MAXIM_DEVICE_TYPE_MAX17042) { + pdata->init_data = max17047_default_pdata_init_regs; + pdata->num_init_data = + ARRAY_SIZE(max17047_default_pdata_init_regs); + } + + ret = regmap_read(chip->regmap, MAX17042_MiscCFG, &misc_cfg); + if (ret < 0) + return NULL; + + /* If bits 0-1 are set to 3 then only Voltage readings are used */ + if ((misc_cfg & 0x3) == 0x3) + pdata->enable_current_sense = false; + else + pdata->enable_current_sense = true; + + pdata->vmin = MAX17042_DEFAULT_VMIN; + pdata->vmax = MAX17042_DEFAULT_VMAX; + pdata->temp_min = MAX17042_DEFAULT_TEMP_MIN; + pdata->temp_max = MAX17042_DEFAULT_TEMP_MAX; + + return pdata; } #endif @@ -858,20 +904,20 @@ static int max17042_probe(struct i2c_client *client, return -ENOMEM; chip->client = client; + chip->chip_type = id->driver_data; chip->regmap = devm_regmap_init_i2c(client, &max17042_regmap_config); if (IS_ERR(chip->regmap)) { dev_err(&client->dev, "Failed to initialize regmap\n"); return -EINVAL; } - chip->pdata = max17042_get_pdata(&client->dev); + chip->pdata = max17042_get_pdata(chip); if (!chip->pdata) { dev_err(&client->dev, "no platform data provided\n"); return -EINVAL; } i2c_set_clientdata(client, chip); - chip->chip_type = id->driver_data; psy_cfg.drv_data = chip; /* When current is not measured, diff --git a/include/linux/power/max17042_battery.h b/include/linux/power/max17042_battery.h index 522757ac9cd4..3489fb0f9099 100644 --- a/include/linux/power/max17042_battery.h +++ b/include/linux/power/max17042_battery.h @@ -24,8 +24,12 @@ #define __MAX17042_BATTERY_H_ #define MAX17042_STATUS_BattAbsent (1 << 3) -#define MAX17042_BATTERY_FULL (100) +#define MAX17042_BATTERY_FULL (95) /* Recommend. FullSOCThr value */ #define MAX17042_DEFAULT_SNS_RESISTOR (10000) +#define MAX17042_DEFAULT_VMIN (3000) +#define MAX17042_DEFAULT_VMAX (4500) /* LiHV cell max */ +#define MAX17042_DEFAULT_TEMP_MIN (0) /* For sys without temp sensor */ +#define MAX17042_DEFAULT_TEMP_MAX (700) /* 70 degrees Celcius */ #define MAX17042_CHARACTERIZATION_DATA_SIZE 48 |