diff options
| -rw-r--r-- | drivers/mmc/core/sd.c | 46 |
1 files changed, 18 insertions, 28 deletions
diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c index cee4c0b59f43..06aa62ce0ed1 100644 --- a/drivers/mmc/core/sd.c +++ b/drivers/mmc/core/sd.c @@ -949,16 +949,17 @@ int mmc_sd_setup_card(struct mmc_host *host, struct mmc_card *card, /* Erase init depends on CSD and SSR */ mmc_init_erase(card); - - /* - * Fetch switch information from card. - */ - err = mmc_read_switch(card); - if (err) - return err; } /* + * Fetch switch information from card. Note, sd3_bus_mode can change if + * voltage switch outcome changes, so do this always. + */ + err = mmc_read_switch(card); + if (err) + return err; + + /* * For SPI, enable CRC as appropriate. * This CRC enable is located AFTER the reading of the * card registers because some SDHC cards are not able @@ -1480,26 +1481,15 @@ retry: if (!v18_fixup_failed && !mmc_host_is_spi(host) && mmc_host_uhs(host) && mmc_sd_card_using_v18(card) && host->ios.signal_voltage != MMC_SIGNAL_VOLTAGE_180) { - /* - * Re-read switch information in case it has changed since - * oldcard was initialized. - */ - if (oldcard) { - err = mmc_read_switch(card); - if (err) - goto free_card; - } - if (mmc_sd_card_using_v18(card)) { - if (mmc_host_set_uhs_voltage(host) || - mmc_sd_init_uhs_card(card)) { - v18_fixup_failed = true; - mmc_power_cycle(host, ocr); - if (!oldcard) - mmc_remove_card(card); - goto retry; - } - goto done; + if (mmc_host_set_uhs_voltage(host) || + mmc_sd_init_uhs_card(card)) { + v18_fixup_failed = true; + mmc_power_cycle(host, ocr); + if (!oldcard) + mmc_remove_card(card); + goto retry; } + goto cont; } /* Initialization sequence for UHS-I cards */ @@ -1534,7 +1524,7 @@ retry: mmc_set_bus_width(host, MMC_BUS_WIDTH_4); } } - +cont: if (!oldcard) { /* Read/parse the extension registers. */ err = sd_read_ext_regs(card); @@ -1566,7 +1556,7 @@ retry: err = -EINVAL; goto free_card; } -done: + host->card = card; return 0; |