diff options
| -rw-r--r-- | Documentation/admin-guide/kernel-parameters.txt | 11 | ||||
| -rw-r--r-- | include/linux/dma-contiguous.h | 6 | ||||
| -rw-r--r-- | kernel/dma/Kconfig | 11 | ||||
| -rw-r--r-- | kernel/dma/contiguous.c | 100 | ||||
| -rw-r--r-- | mm/Kconfig | 3 |
5 files changed, 120 insertions, 11 deletions
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index a1068742a6df..e464cf0b5025 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -599,6 +599,17 @@ altogether. For more information, see include/linux/dma-contiguous.h + cma_pernuma=nn[MG] + [ARM64,KNL] + Sets the size of kernel per-numa memory area for + contiguous memory allocations. A value of 0 disables + per-numa CMA altogether. And If this option is not + specificed, the default value is 0. + With per-numa CMA enabled, DMA users on node nid will + first try to allocate buffer from the pernuma area + which is located in node nid, if the allocation fails, + they will fallback to the global default memory area. + cmo_free_hint= [PPC] Format: { yes | no } Specify whether pages are marked as being inactive when they are freed. This is used in CMO environments diff --git a/include/linux/dma-contiguous.h b/include/linux/dma-contiguous.h index 03f8e98e3bcc..fe55e004f1f4 100644 --- a/include/linux/dma-contiguous.h +++ b/include/linux/dma-contiguous.h @@ -171,6 +171,12 @@ static inline void dma_free_contiguous(struct device *dev, struct page *page, #endif +#ifdef CONFIG_DMA_PERNUMA_CMA +void dma_pernuma_cma_reserve(void); +#else +static inline void dma_pernuma_cma_reserve(void) { } +#endif + #endif #endif diff --git a/kernel/dma/Kconfig b/kernel/dma/Kconfig index 847a9d1fa634..0ddfb5510fe4 100644 --- a/kernel/dma/Kconfig +++ b/kernel/dma/Kconfig @@ -118,6 +118,17 @@ config DMA_CMA If unsure, say "n". if DMA_CMA + +config DMA_PERNUMA_CMA + bool "Enable separate DMA Contiguous Memory Area for each NUMA Node" + default NUMA && ARM64 + help + Enable this option to get pernuma CMA areas so that devices like + ARM64 SMMU can get local memory by DMA coherent APIs. + + You can set the size of pernuma CMA by specifying "cma_pernuma=size" + on the kernel's command line. + comment "Default contiguous memory area size:" config CMA_SIZE_MBYTES diff --git a/kernel/dma/contiguous.c b/kernel/dma/contiguous.c index cff7e60968b9..aa53384fd7dc 100644 --- a/kernel/dma/contiguous.c +++ b/kernel/dma/contiguous.c @@ -69,6 +69,19 @@ static int __init early_cma(char *p) } early_param("cma", early_cma); +#ifdef CONFIG_DMA_PERNUMA_CMA + +static struct cma *dma_contiguous_pernuma_area[MAX_NUMNODES]; +static phys_addr_t pernuma_size_bytes __initdata; + +static int __init early_cma_pernuma(char *p) +{ + pernuma_size_bytes = memparse(p, &p); + return 0; +} +early_param("cma_pernuma", early_cma_pernuma); +#endif + #ifdef CONFIG_CMA_SIZE_PERCENTAGE static phys_addr_t __init __maybe_unused cma_early_percent_memory(void) @@ -96,6 +109,34 @@ static inline __maybe_unused phys_addr_t cma_early_percent_memory(void) #endif +#ifdef CONFIG_DMA_PERNUMA_CMA +void __init dma_pernuma_cma_reserve(void) +{ + int nid; + + if (!pernuma_size_bytes) + return; + + for_each_online_node(nid) { + int ret; + char name[20]; + struct cma **cma = &dma_contiguous_pernuma_area[nid]; + + snprintf(name, sizeof(name), "pernuma%d", nid); + ret = cma_declare_contiguous_nid(0, pernuma_size_bytes, 0, 0, + 0, false, name, cma, nid); + if (ret) { + pr_warn("%s: reservation failed: err %d, node %d", __func__, + ret, nid); + continue; + } + + pr_debug("%s: reserved %llu MiB on node %d\n", __func__, + (unsigned long long)pernuma_size_bytes / SZ_1M, nid); + } +} +#endif + /** * dma_contiguous_reserve() - reserve area(s) for contiguous memory handling * @limit: End address of the reserved memory (optional, 0 for any). @@ -228,23 +269,44 @@ static struct page *cma_alloc_aligned(struct cma *cma, size_t size, gfp_t gfp) * @size: Requested allocation size. * @gfp: Allocation flags. * - * This function allocates contiguous memory buffer for specified device. It - * tries to use device specific contiguous memory area if available, or the - * default global one. + * tries to use device specific contiguous memory area if available, or it + * tries to use per-numa cma, if the allocation fails, it will fallback to + * try default global one. * - * Note that it byapss one-page size of allocations from the global area as - * the addresses within one page are always contiguous, so there is no need - * to waste CMA pages for that kind; it also helps reduce fragmentations. + * Note that it bypass one-page size of allocations from the per-numa and + * global area as the addresses within one page are always contiguous, so + * there is no need to waste CMA pages for that kind; it also helps reduce + * fragmentations. */ struct page *dma_alloc_contiguous(struct device *dev, size_t size, gfp_t gfp) { +#ifdef CONFIG_DMA_PERNUMA_CMA + int nid = dev_to_node(dev); +#endif + /* CMA can be used only in the context which permits sleeping */ if (!gfpflags_allow_blocking(gfp)) return NULL; if (dev->cma_area) return cma_alloc_aligned(dev->cma_area, size, gfp); - if (size <= PAGE_SIZE || !dma_contiguous_default_area) + if (size <= PAGE_SIZE) + return NULL; + +#ifdef CONFIG_DMA_PERNUMA_CMA + if (nid != NUMA_NO_NODE && !(gfp & (GFP_DMA | GFP_DMA32))) { + struct cma *cma = dma_contiguous_pernuma_area[nid]; + struct page *page; + + if (cma) { + page = cma_alloc_aligned(cma, size, gfp); + if (page) + return page; + } + } +#endif + if (!dma_contiguous_default_area) return NULL; + return cma_alloc_aligned(dma_contiguous_default_area, size, gfp); } @@ -261,9 +323,27 @@ struct page *dma_alloc_contiguous(struct device *dev, size_t size, gfp_t gfp) */ void dma_free_contiguous(struct device *dev, struct page *page, size_t size) { - if (!cma_release(dev_get_cma_area(dev), page, - PAGE_ALIGN(size) >> PAGE_SHIFT)) - __free_pages(page, get_order(size)); + unsigned int count = PAGE_ALIGN(size) >> PAGE_SHIFT; + + /* if dev has its own cma, free page from there */ + if (dev->cma_area) { + if (cma_release(dev->cma_area, page, count)) + return; + } else { + /* + * otherwise, page is from either per-numa cma or default cma + */ +#ifdef CONFIG_DMA_PERNUMA_CMA + if (cma_release(dma_contiguous_pernuma_area[page_to_nid(page)], + page, count)) + return; +#endif + if (cma_release(dma_contiguous_default_area, page, count)) + return; + } + + /* not in any cma, free from buddy */ + __free_pages(page, get_order(size)); } /* diff --git a/mm/Kconfig b/mm/Kconfig index 6c974888f86f..d75a0107f61f 100644 --- a/mm/Kconfig +++ b/mm/Kconfig @@ -516,13 +516,14 @@ config CMA_DEBUGFS config CMA_AREAS int "Maximum count of the CMA areas" depends on CMA + default 19 if NUMA default 7 help CMA allows to create CMA areas for particular purpose, mainly, used as device private area. This parameter sets the maximum number of CMA area in the system. - If unsure, leave the default value "7". + If unsure, leave the default value "7" in UMA and "19" in NUMA. config MEM_SOFT_DIRTY bool "Track memory changes" |