diff options
| -rw-r--r-- | drivers/pci/quirks.c | 18 |
1 files changed, 9 insertions, 9 deletions
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 2a7521677541..993cec88c5b4 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -253,7 +253,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C576, quirk_vsfx) * workaround applied too * [Info kindly provided by ALi] */ -static void __init quirk_alimagik(struct pci_dev *dev) +static void __devinit quirk_alimagik(struct pci_dev *dev) { if ((pci_pci_problems&PCIPCI_ALIMAGIK)==0) { dev_info(&dev->dev, "Limiting direct PCI/PCI transfers\n"); @@ -789,7 +789,7 @@ static void __devinit quirk_amd_ioapic(struct pci_dev *dev) } DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_VIPER_7410, quirk_amd_ioapic); -static void __init quirk_ioapic_rmw(struct pci_dev *dev) +static void __devinit quirk_ioapic_rmw(struct pci_dev *dev) { if (dev->devfn == 0 && dev->bus->number == 0) sis_apic_bug = 1; @@ -801,7 +801,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SI, PCI_ANY_ID, quirk_ioapic_rmw); * Some settings of MMRBC can lead to data corruption so block changes. * See AMD 8131 HyperTransport PCI-X Tunnel Revision Guide */ -static void __init quirk_amd_8131_mmrbc(struct pci_dev *dev) +static void __devinit quirk_amd_8131_mmrbc(struct pci_dev *dev) { if (dev->subordinate && dev->revision <= 0x12) { dev_info(&dev->dev, "AMD8131 rev %x detected; " @@ -1082,7 +1082,7 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB /* * Intel 82801CAM ICH3-M datasheet says IDE modes must be the same */ -static void __init quirk_ide_samemode(struct pci_dev *pdev) +static void __devinit quirk_ide_samemode(struct pci_dev *pdev) { u8 prog; @@ -1121,7 +1121,7 @@ DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_VIA, PCI_ANY_ID, /* This was originally an Alpha specific thing, but it really fits here. * The i82375 PCI/EISA bridge appears as non-classified. Fix that. */ -static void __init quirk_eisa_bridge(struct pci_dev *dev) +static void __devinit quirk_eisa_bridge(struct pci_dev *dev) { dev->class = PCI_CLASS_BRIDGE_EISA << 8; } @@ -1155,7 +1155,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82375, quirk_e */ static int asus_hides_smbus; -static void __init asus_hides_smbus_hostbridge(struct pci_dev *dev) +static void __devinit asus_hides_smbus_hostbridge(struct pci_dev *dev) { if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_ASUSTEK)) { if (dev->device == PCI_DEVICE_ID_INTEL_82845_HB) @@ -1538,7 +1538,7 @@ DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB3 #endif #ifdef CONFIG_X86_IO_APIC -static void __init quirk_alder_ioapic(struct pci_dev *pdev) +static void __devinit quirk_alder_ioapic(struct pci_dev *pdev) { int i; @@ -1777,7 +1777,7 @@ DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_SMBUS, qui * but the PIO transfers won't work if BAR0 falls at the odd 8 bytes. * Re-allocate the region if needed... */ -static void __init quirk_tc86c001_ide(struct pci_dev *dev) +static void __devinit quirk_tc86c001_ide(struct pci_dev *dev) { struct resource *r = &dev->resource[0]; @@ -2169,7 +2169,7 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8624, quirk_tile_plx_gen1); * aware of it. Instead of setting the flag on all busses in the * machine, simply disable MSI globally. */ -static void __init quirk_disable_all_msi(struct pci_dev *dev) +static void __devinit quirk_disable_all_msi(struct pci_dev *dev) { pci_no_msi(); dev_warn(&dev->dev, "MSI quirk detected; MSI disabled\n"); |