diff options
| -rw-r--r-- | Documentation/networking/phy.rst | 5 | ||||
| -rw-r--r-- | drivers/net/phy/sfp-bus.c | 9 | ||||
| -rw-r--r-- | include/linux/phy.h | 4 |
3 files changed, 18 insertions, 0 deletions
diff --git a/Documentation/networking/phy.rst b/Documentation/networking/phy.rst index b2f7ec794bc8..399f17976a6c 100644 --- a/Documentation/networking/phy.rst +++ b/Documentation/networking/phy.rst @@ -286,6 +286,11 @@ Some of the interface modes are described below: Note: due to legacy usage, some 10GBASE-R usage incorrectly makes use of this definition. +``PHY_INTERFACE_MODE_100BASEX`` + This defines IEEE 802.3 Clause 24. The link operates at a fixed data + rate of 125Mpbs using a 4B/5B encoding scheme, resulting in an underlying + data rate of 100Mpbs. + Pause frames / flow control =========================== diff --git a/drivers/net/phy/sfp-bus.c b/drivers/net/phy/sfp-bus.c index cdfa0a190962..3c67ad9951ab 100644 --- a/drivers/net/phy/sfp-bus.c +++ b/drivers/net/phy/sfp-bus.c @@ -265,6 +265,12 @@ void sfp_parse_support(struct sfp_bus *bus, const struct sfp_eeprom_id *id, br_min <= 1300 && br_max >= 1200) phylink_set(modes, 1000baseX_Full); + /* 100Base-FX, 100Base-LX, 100Base-PX, 100Base-BX10 */ + if (id->base.e100_base_fx || id->base.e100_base_lx) + phylink_set(modes, 100baseFX_Full); + if ((id->base.e_base_px || id->base.e_base_bx10) && br_nom == 100) + phylink_set(modes, 100baseFX_Full); + /* For active or passive cables, select the link modes * based on the bit rates and the cable compliance bytes. */ @@ -389,6 +395,9 @@ phy_interface_t sfp_select_interface(struct sfp_bus *bus, if (phylink_test(link_modes, 1000baseX_Full)) return PHY_INTERFACE_MODE_1000BASEX; + if (phylink_test(link_modes, 100baseFX_Full)) + return PHY_INTERFACE_MODE_100BASEX; + dev_warn(bus->sfp_dev, "Unable to ascertain link mode\n"); return PHY_INTERFACE_MODE_NA; diff --git a/include/linux/phy.h b/include/linux/phy.h index 9effb511acde..24fcc6456a9e 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -104,6 +104,7 @@ extern const int phy_10gbit_features_array[1]; * @PHY_INTERFACE_MODE_MOCA: Multimedia over Coax * @PHY_INTERFACE_MODE_QSGMII: Quad SGMII * @PHY_INTERFACE_MODE_TRGMII: Turbo RGMII + * @PHY_INTERFACE_MODE_100BASEX: 100 BaseX * @PHY_INTERFACE_MODE_1000BASEX: 1000 BaseX * @PHY_INTERFACE_MODE_2500BASEX: 2500 BaseX * @PHY_INTERFACE_MODE_RXAUI: Reduced XAUI @@ -135,6 +136,7 @@ typedef enum { PHY_INTERFACE_MODE_MOCA, PHY_INTERFACE_MODE_QSGMII, PHY_INTERFACE_MODE_TRGMII, + PHY_INTERFACE_MODE_100BASEX, PHY_INTERFACE_MODE_1000BASEX, PHY_INTERFACE_MODE_2500BASEX, PHY_INTERFACE_MODE_RXAUI, @@ -217,6 +219,8 @@ static inline const char *phy_modes(phy_interface_t interface) return "usxgmii"; case PHY_INTERFACE_MODE_10GKR: return "10gbase-kr"; + case PHY_INTERFACE_MODE_100BASEX: + return "100base-x"; default: return "unknown"; } |