aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--drivers/media/pci/cx23885/cx23885-cards.c22
-rw-r--r--drivers/media/pci/cx23885/cx23885-dvb.c99
-rw-r--r--drivers/media/pci/cx23885/cx23885-input.c3
-rw-r--r--drivers/media/pci/cx23885/cx23885.h1
4 files changed, 124 insertions, 1 deletions
diff --git a/drivers/media/pci/cx23885/cx23885-cards.c b/drivers/media/pci/cx23885/cx23885-cards.c
index 4b9cb0795e7e..4bad27d1caa2 100644
--- a/drivers/media/pci/cx23885/cx23885-cards.c
+++ b/drivers/media/pci/cx23885/cx23885-cards.c
@@ -696,6 +696,11 @@ struct cx23885_board cx23885_boards[] = {
.name = "DVBSky S950",
.portb = CX23885_MPEG_DVB,
},
+ [CX23885_BOARD_DVBSKY_S952] = {
+ .name = "DVBSky S952",
+ .portb = CX23885_MPEG_DVB,
+ .portc = CX23885_MPEG_DVB,
+ },
};
const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards);
@@ -971,6 +976,10 @@ struct cx23885_subid cx23885_subids[] = {
.subvendor = 0x4254,
.subdevice = 0x0950,
.card = CX23885_BOARD_DVBSKY_S950,
+ }, {
+ .subvendor = 0x4254,
+ .subdevice = 0x0952,
+ .card = CX23885_BOARD_DVBSKY_S952,
},
};
const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids);
@@ -1566,6 +1575,7 @@ void cx23885_gpio_setup(struct cx23885_dev *dev)
mdelay(60);
break;
case CX23885_BOARD_DVBSKY_T9580:
+ case CX23885_BOARD_DVBSKY_S952:
/* enable GPIO3-18 pins */
cx_write(MC417_CTL, 0x00000037);
cx23885_gpio_enable(dev, GPIO_2 | GPIO_11, 1);
@@ -1697,6 +1707,7 @@ int cx23885_ir_init(struct cx23885_dev *dev)
case CX23885_BOARD_DVBSKY_S950C:
case CX23885_BOARD_TT_CT2_4500_CI:
case CX23885_BOARD_DVBSKY_S950:
+ case CX23885_BOARD_DVBSKY_S952:
if (!enable_885_ir)
break;
dev->sd_ir = cx23885_find_hw(dev, CX23885_HW_AV_CORE);
@@ -1748,6 +1759,7 @@ void cx23885_ir_fini(struct cx23885_dev *dev)
case CX23885_BOARD_DVBSKY_S950C:
case CX23885_BOARD_TT_CT2_4500_CI:
case CX23885_BOARD_DVBSKY_S950:
+ case CX23885_BOARD_DVBSKY_S952:
cx23885_irq_remove(dev, PCI_MSK_AV_CORE);
/* sd_ir is a duplicate pointer to the AV Core, just clear it */
dev->sd_ir = NULL;
@@ -1800,6 +1812,7 @@ void cx23885_ir_pci_int_enable(struct cx23885_dev *dev)
case CX23885_BOARD_DVBSKY_S950C:
case CX23885_BOARD_TT_CT2_4500_CI:
case CX23885_BOARD_DVBSKY_S950:
+ case CX23885_BOARD_DVBSKY_S952:
if (dev->sd_ir)
cx23885_irq_add_enable(dev, PCI_MSK_AV_CORE);
break;
@@ -1962,6 +1975,14 @@ void cx23885_card_setup(struct cx23885_dev *dev)
ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
break;
+ case CX23885_BOARD_DVBSKY_S952:
+ ts1->gen_ctrl_val = 0x5; /* Parallel */
+ ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
+ ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
+ ts2->gen_ctrl_val = 0xe; /* Serial bus */
+ ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
+ ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
+ break;
case CX23885_BOARD_HAUPPAUGE_HVR1250:
case CX23885_BOARD_HAUPPAUGE_HVR1500:
case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
@@ -2029,6 +2050,7 @@ void cx23885_card_setup(struct cx23885_dev *dev)
case CX23885_BOARD_DVBSKY_S950C:
case CX23885_BOARD_TT_CT2_4500_CI:
case CX23885_BOARD_DVBSKY_S950:
+ case CX23885_BOARD_DVBSKY_S952:
dev->sd_cx25840 = v4l2_i2c_new_subdev(&dev->v4l2_dev,
&dev->i2c_bus[2].i2c_adap,
"cx25840", 0x88 >> 1, NULL);
diff --git a/drivers/media/pci/cx23885/cx23885-dvb.c b/drivers/media/pci/cx23885/cx23885-dvb.c
index 3410ab86bcf7..2457b6483a40 100644
--- a/drivers/media/pci/cx23885/cx23885-dvb.c
+++ b/drivers/media/pci/cx23885/cx23885-dvb.c
@@ -617,6 +617,32 @@ static int dvbsky_t9580_set_voltage(struct dvb_frontend *fe,
return 0;
}
+static int dvbsky_s952_portc_set_voltage(struct dvb_frontend *fe,
+ fe_sec_voltage_t voltage)
+{
+ struct cx23885_tsport *port = fe->dvb->priv;
+ struct cx23885_dev *dev = port->dev;
+
+ cx23885_gpio_enable(dev, GPIO_12 | GPIO_13, 1);
+
+ switch (voltage) {
+ case SEC_VOLTAGE_13:
+ cx23885_gpio_set(dev, GPIO_13);
+ cx23885_gpio_clear(dev, GPIO_12);
+ break;
+ case SEC_VOLTAGE_18:
+ cx23885_gpio_set(dev, GPIO_13);
+ cx23885_gpio_set(dev, GPIO_12);
+ break;
+ case SEC_VOLTAGE_OFF:
+ cx23885_gpio_clear(dev, GPIO_13);
+ cx23885_gpio_clear(dev, GPIO_12);
+ break;
+ }
+ /* call the frontend set_voltage function */
+ return port->fe_set_voltage(fe, voltage);
+}
+
static int cx23885_sp2_ci_ctrl(void *priv, u8 read, int addr,
u8 data, int *mem)
{
@@ -878,6 +904,19 @@ static const struct m88ds3103_config dvbsky_s950c_m88ds3103_config = {
.agc = 0x99,
};
+static const struct m88ds3103_config dvbsky_s952_portc_m88ds3103_config = {
+ .i2c_addr = 0x68,
+ .clock = 27000000,
+ .i2c_wr_max = 33,
+ .clock_out = 0,
+ .ts_mode = M88DS3103_TS_SERIAL,
+ .ts_clk = 96000,
+ .ts_clk_pol = 0,
+ .lnb_en_pol = 1,
+ .lnb_hv_pol = 0,
+ .agc = 0x99,
+};
+
static int netup_altera_fpga_rw(void *device, int flag, int data, int read)
{
struct cx23885_dev *dev = (struct cx23885_dev *)device;
@@ -1034,6 +1073,8 @@ static int dvb_register(struct cx23885_tsport *port)
struct i2c_board_info info;
struct i2c_adapter *adapter;
struct i2c_client *client_demod = NULL, *client_tuner = NULL, *client_ci = NULL;
+ const struct m88ds3103_config *p_m88ds3103_config = NULL;
+ int (*p_set_voltage)(struct dvb_frontend *fe, fe_sec_voltage_t voltage) = NULL;
int mfe_shared = 0; /* bus not shared by default */
int ret;
@@ -1849,6 +1890,61 @@ static int dvb_register(struct cx23885_tsport *port)
port->i2c_client_tuner = client_tuner;
break;
+ case CX23885_BOARD_DVBSKY_S952:
+ switch (port->nr) {
+ /* port b */
+ case 1:
+ i2c_bus = &dev->i2c_bus[1];
+ p_m88ds3103_config = &dvbsky_t9580_m88ds3103_config;
+ p_set_voltage = dvbsky_t9580_set_voltage;
+ break;
+ /* port c */
+ case 2:
+ i2c_bus = &dev->i2c_bus[0];
+ p_m88ds3103_config = &dvbsky_s952_portc_m88ds3103_config;
+ p_set_voltage = dvbsky_s952_portc_set_voltage;
+ break;
+ }
+
+ /* attach frontend */
+ fe0->dvb.frontend = dvb_attach(m88ds3103_attach,
+ p_m88ds3103_config,
+ &i2c_bus->i2c_adap, &adapter);
+ if (fe0->dvb.frontend == NULL)
+ break;
+
+ /* attach tuner */
+ memset(&m88ts2022_config, 0, sizeof(m88ts2022_config));
+ m88ts2022_config.fe = fe0->dvb.frontend;
+ m88ts2022_config.clock = 27000000;
+ memset(&info, 0, sizeof(struct i2c_board_info));
+ strlcpy(info.type, "m88ts2022", I2C_NAME_SIZE);
+ info.addr = 0x60;
+ info.platform_data = &m88ts2022_config;
+ request_module(info.type);
+ client_tuner = i2c_new_device(adapter, &info);
+ if (client_tuner == NULL ||
+ client_tuner->dev.driver == NULL)
+ goto frontend_detach;
+ if (!try_module_get(client_tuner->dev.driver->owner)) {
+ i2c_unregister_device(client_tuner);
+ goto frontend_detach;
+ }
+
+ /* delegate signal strength measurement to tuner */
+ fe0->dvb.frontend->ops.read_signal_strength =
+ fe0->dvb.frontend->ops.tuner_ops.get_rf_strength;
+
+ /*
+ * for setting the voltage we need to set GPIOs on
+ * the card.
+ */
+ port->fe_set_voltage =
+ fe0->dvb.frontend->ops.set_voltage;
+ fe0->dvb.frontend->ops.set_voltage = p_set_voltage;
+
+ port->i2c_client_tuner = client_tuner;
+ break;
default:
printk(KERN_INFO "%s: The frontend of your DVB/ATSC card "
" isn't supported yet\n",
@@ -1924,7 +2020,8 @@ static int dvb_register(struct cx23885_tsport *port)
break;
}
case CX23885_BOARD_DVBSKY_T9580:
- case CX23885_BOARD_DVBSKY_S950: {
+ case CX23885_BOARD_DVBSKY_S950:
+ case CX23885_BOARD_DVBSKY_S952: {
u8 eeprom[256]; /* 24C02 i2c eeprom */
if (port->nr > 2)
diff --git a/drivers/media/pci/cx23885/cx23885-input.c b/drivers/media/pci/cx23885/cx23885-input.c
index 7523d0a8ae1d..a1f489444355 100644
--- a/drivers/media/pci/cx23885/cx23885-input.c
+++ b/drivers/media/pci/cx23885/cx23885-input.c
@@ -92,6 +92,7 @@ void cx23885_input_rx_work_handler(struct cx23885_dev *dev, u32 events)
case CX23885_BOARD_DVBSKY_S950C:
case CX23885_BOARD_TT_CT2_4500_CI:
case CX23885_BOARD_DVBSKY_S950:
+ case CX23885_BOARD_DVBSKY_S952:
/*
* The only boards we handle right now. However other boards
* using the CX2388x integrated IR controller should be similar
@@ -149,6 +150,7 @@ static int cx23885_input_ir_start(struct cx23885_dev *dev)
case CX23885_BOARD_DVBSKY_S950C:
case CX23885_BOARD_TT_CT2_4500_CI:
case CX23885_BOARD_DVBSKY_S950:
+ case CX23885_BOARD_DVBSKY_S952:
/*
* The IR controller on this board only returns pulse widths.
* Any other mode setting will fail to set up the device.
@@ -319,6 +321,7 @@ int cx23885_input_init(struct cx23885_dev *dev)
case CX23885_BOARD_DVBSKY_T980C:
case CX23885_BOARD_DVBSKY_S950C:
case CX23885_BOARD_DVBSKY_S950:
+ case CX23885_BOARD_DVBSKY_S952:
/* Integrated CX23885 IR controller */
driver_type = RC_DRIVER_IR_RAW;
allowed_protos = RC_BIT_ALL;
diff --git a/drivers/media/pci/cx23885/cx23885.h b/drivers/media/pci/cx23885/cx23885.h
index f9cd0da72d02..58c5038c816b 100644
--- a/drivers/media/pci/cx23885/cx23885.h
+++ b/drivers/media/pci/cx23885/cx23885.h
@@ -97,6 +97,7 @@
#define CX23885_BOARD_DVBSKY_S950C 47
#define CX23885_BOARD_TT_CT2_4500_CI 48
#define CX23885_BOARD_DVBSKY_S950 49
+#define CX23885_BOARD_DVBSKY_S952 50
#define GPIO_0 0x00000001
#define GPIO_1 0x00000002
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.