diff options
| -rw-r--r-- | drivers/mmc/core/sd.c | 68 | ||||
| -rw-r--r-- | include/linux/mmc/host.h | 1 |
2 files changed, 40 insertions, 29 deletions
diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c index ff2774128aa9..633975ff2bb3 100644 --- a/drivers/mmc/core/sd.c +++ b/drivers/mmc/core/sd.c @@ -409,52 +409,62 @@ out: static int sd_select_driver_type(struct mmc_card *card, u8 *status) { - int host_drv_type = 0, card_drv_type = 0; + int host_drv_type = SD_DRIVER_TYPE_B; + int card_drv_type = SD_DRIVER_TYPE_B; + int drive_strength; int err; /* * If the host doesn't support any of the Driver Types A,C or D, - * default Driver Type B is used. + * or there is no board specific handler then default Driver + * Type B is used. */ if (!(card->host->caps & (MMC_CAP_DRIVER_TYPE_A | MMC_CAP_DRIVER_TYPE_C | MMC_CAP_DRIVER_TYPE_D))) return 0; - if (card->host->caps & MMC_CAP_DRIVER_TYPE_A) { - host_drv_type = MMC_SET_DRIVER_TYPE_A; - if (card->sw_caps.sd3_drv_type & SD_DRIVER_TYPE_A) - card_drv_type = MMC_SET_DRIVER_TYPE_A; - else if (card->sw_caps.sd3_drv_type & SD_DRIVER_TYPE_B) - card_drv_type = MMC_SET_DRIVER_TYPE_B; - else if (card->sw_caps.sd3_drv_type & SD_DRIVER_TYPE_C) - card_drv_type = MMC_SET_DRIVER_TYPE_C; - } else if (card->host->caps & MMC_CAP_DRIVER_TYPE_C) { - host_drv_type = MMC_SET_DRIVER_TYPE_C; - if (card->sw_caps.sd3_drv_type & SD_DRIVER_TYPE_C) - card_drv_type = MMC_SET_DRIVER_TYPE_C; - } else if (!(card->host->caps & MMC_CAP_DRIVER_TYPE_D)) { - /* - * If we are here, that means only the default driver type - * B is supported by the host. - */ - host_drv_type = MMC_SET_DRIVER_TYPE_B; - if (card->sw_caps.sd3_drv_type & SD_DRIVER_TYPE_B) - card_drv_type = MMC_SET_DRIVER_TYPE_B; - else if (card->sw_caps.sd3_drv_type & SD_DRIVER_TYPE_C) - card_drv_type = MMC_SET_DRIVER_TYPE_C; - } + if (!card->host->ops->select_drive_strength) + return 0; + + if (card->host->caps & MMC_CAP_DRIVER_TYPE_A) + host_drv_type |= SD_DRIVER_TYPE_A; + + if (card->host->caps & MMC_CAP_DRIVER_TYPE_C) + host_drv_type |= SD_DRIVER_TYPE_C; + + if (card->host->caps & MMC_CAP_DRIVER_TYPE_D) + host_drv_type |= SD_DRIVER_TYPE_D; + + if (card->sw_caps.sd3_drv_type & SD_DRIVER_TYPE_A) + card_drv_type |= SD_DRIVER_TYPE_A; + + if (card->sw_caps.sd3_drv_type & SD_DRIVER_TYPE_C) + card_drv_type |= SD_DRIVER_TYPE_C; + + if (card->sw_caps.sd3_drv_type & SD_DRIVER_TYPE_D) + card_drv_type |= SD_DRIVER_TYPE_D; + + /* + * The drive strength that the hardware can support + * depends on the board design. Pass the appropriate + * information and let the hardware specific code + * return what is possible given the options + */ + drive_strength = card->host->ops->select_drive_strength( + card->sw_caps.uhs_max_dtr, + host_drv_type, card_drv_type); - err = mmc_sd_switch(card, 1, 2, card_drv_type, status); + err = mmc_sd_switch(card, 1, 2, drive_strength, status); if (err) return err; - if ((status[15] & 0xF) != card_drv_type) { - printk(KERN_WARNING "%s: Problem setting driver strength!\n", + if ((status[15] & 0xF) != drive_strength) { + printk(KERN_WARNING "%s: Problem setting drive strength!\n", mmc_hostname(card->host)); return 0; } - mmc_set_driver_type(card->host, host_drv_type); + mmc_set_driver_type(card->host, drive_strength); return 0; } diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index 9f9a4c64cde7..0f83858147a6 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -148,6 +148,7 @@ struct mmc_host_ops { int (*start_signal_voltage_switch)(struct mmc_host *host, struct mmc_ios *ios); int (*execute_tuning)(struct mmc_host *host); void (*enable_preset_value)(struct mmc_host *host, bool enable); + int (*select_drive_strength)(unsigned int max_dtr, int host_drv, int card_drv); }; struct mmc_card; |