diff options
| -rw-r--r-- | drivers/mmc/core/mmc.c | 24 | ||||
| -rw-r--r-- | drivers/mmc/host/omap_hsmmc.c | 12 | ||||
| -rw-r--r-- | drivers/mmc/host/sdhci-tegra.c | 8 | ||||
| -rw-r--r-- | drivers/mmc/host/sdhci.c | 4 |
4 files changed, 32 insertions, 16 deletions
diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index bc1bd2c25613..55997cf84b39 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -30,6 +30,7 @@ #include "pwrseq.h" #define DEFAULT_CMD6_TIMEOUT_MS 500 +#define MIN_CACHE_EN_TIMEOUT_MS 1600 static const unsigned int tran_exp[] = { 10000, 100000, 1000000, 10000000, @@ -526,8 +527,7 @@ static int mmc_decode_ext_csd(struct mmc_card *card, u8 *ext_csd) card->cid.year += 16; /* check whether the eMMC card supports BKOPS */ - if (!mmc_card_broken_hpi(card) && - ext_csd[EXT_CSD_BKOPS_SUPPORT] & 0x1) { + if (ext_csd[EXT_CSD_BKOPS_SUPPORT] & 0x1) { card->ext_csd.bkops = 1; card->ext_csd.man_bkops_en = (ext_csd[EXT_CSD_BKOPS_EN] & @@ -1782,20 +1782,26 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, if (err) { pr_warn("%s: Enabling HPI failed\n", mmc_hostname(card->host)); + card->ext_csd.hpi_en = 0; err = 0; - } else + } else { card->ext_csd.hpi_en = 1; + } } /* - * If cache size is higher than 0, this indicates - * the existence of cache and it can be turned on. + * If cache size is higher than 0, this indicates the existence of cache + * and it can be turned on. Note that some eMMCs from Micron has been + * reported to need ~800 ms timeout, while enabling the cache after + * sudden power failure tests. Let's extend the timeout to a minimum of + * DEFAULT_CACHE_EN_TIMEOUT_MS and do it for all cards. */ - if (!mmc_card_broken_hpi(card) && - card->ext_csd.cache_size > 0) { + if (card->ext_csd.cache_size > 0) { + unsigned int timeout_ms = MIN_CACHE_EN_TIMEOUT_MS; + + timeout_ms = max(card->ext_csd.generic_cmd6_time, timeout_ms); err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, - EXT_CSD_CACHE_CTRL, 1, - card->ext_csd.generic_cmd6_time); + EXT_CSD_CACHE_CTRL, 1, timeout_ms); if (err && err != -EBADMSG) goto free_card; diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c index 467d889a1638..3f4ea8f624be 100644 --- a/drivers/mmc/host/omap_hsmmc.c +++ b/drivers/mmc/host/omap_hsmmc.c @@ -1909,7 +1909,6 @@ static int omap_hsmmc_probe(struct platform_device *pdev) mmc->max_blk_size = 512; /* Block Length at max can be 1024 */ mmc->max_blk_count = 0xFFFF; /* No. of Blocks is 16 bits */ mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count; - mmc->max_seg_size = mmc->max_req_size; mmc->caps |= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED | MMC_CAP_WAIT_WHILE_BUSY | MMC_CAP_ERASE | MMC_CAP_CMD23; @@ -1939,6 +1938,17 @@ static int omap_hsmmc_probe(struct platform_device *pdev) goto err_irq; } + /* + * Limit the maximum segment size to the lower of the request size + * and the DMA engine device segment size limits. In reality, with + * 32-bit transfers, the DMA engine can do longer segments than this + * but there is no way to represent that in the DMA model - if we + * increase this figure here, we get warnings from the DMA API debug. + */ + mmc->max_seg_size = min3(mmc->max_req_size, + dma_get_max_seg_size(host->rx_chan->device->dev), + dma_get_max_seg_size(host->tx_chan->device->dev)); + /* Request IRQ for MMC operations */ ret = devm_request_irq(&pdev->dev, host->irq, omap_hsmmc_irq, 0, mmc_hostname(mmc), host); diff --git a/drivers/mmc/host/sdhci-tegra.c b/drivers/mmc/host/sdhci-tegra.c index 7b95d088fdef..e6ace31e2a41 100644 --- a/drivers/mmc/host/sdhci-tegra.c +++ b/drivers/mmc/host/sdhci-tegra.c @@ -510,25 +510,25 @@ static void tegra_sdhci_parse_pad_autocal_dt(struct sdhci_host *host) err = device_property_read_u32(host->mmc->parent, "nvidia,pad-autocal-pull-up-offset-3v3-timeout", - &autocal->pull_up_3v3); + &autocal->pull_up_3v3_timeout); if (err) autocal->pull_up_3v3_timeout = 0; err = device_property_read_u32(host->mmc->parent, "nvidia,pad-autocal-pull-down-offset-3v3-timeout", - &autocal->pull_down_3v3); + &autocal->pull_down_3v3_timeout); if (err) autocal->pull_down_3v3_timeout = 0; err = device_property_read_u32(host->mmc->parent, "nvidia,pad-autocal-pull-up-offset-1v8-timeout", - &autocal->pull_up_1v8); + &autocal->pull_up_1v8_timeout); if (err) autocal->pull_up_1v8_timeout = 0; err = device_property_read_u32(host->mmc->parent, "nvidia,pad-autocal-pull-down-offset-1v8-timeout", - &autocal->pull_down_1v8); + &autocal->pull_down_1v8_timeout); if (err) autocal->pull_down_1v8_timeout = 0; diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 451b08a818a9..df05352b6a4a 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -127,12 +127,12 @@ static void sdhci_do_enable_v4_mode(struct sdhci_host *host) { u16 ctrl2; - ctrl2 = sdhci_readb(host, SDHCI_HOST_CONTROL2); + ctrl2 = sdhci_readw(host, SDHCI_HOST_CONTROL2); if (ctrl2 & SDHCI_CTRL_V4_MODE) return; ctrl2 |= SDHCI_CTRL_V4_MODE; - sdhci_writeb(host, ctrl2, SDHCI_HOST_CONTROL); + sdhci_writew(host, ctrl2, SDHCI_HOST_CONTROL2); } /* |