diff options
-rw-r--r-- | drivers/net/phy/lxt.c | 24 | ||||
-rw-r--r-- | drivers/net/phy/marvell.c | 209 | ||||
-rw-r--r-- | drivers/net/phy/mscc.c | 6 | ||||
-rw-r--r-- | drivers/net/phy/phy_device.c | 98 | ||||
-rw-r--r-- | drivers/net/phy/uPD60620.c | 7 | ||||
-rw-r--r-- | include/linux/phy.h | 2 |
6 files changed, 129 insertions, 217 deletions
diff --git a/drivers/net/phy/lxt.c b/drivers/net/phy/lxt.c index 356bd6472f49..fec58ad69e02 100644 --- a/drivers/net/phy/lxt.c +++ b/drivers/net/phy/lxt.c @@ -190,27 +190,11 @@ static int lxt973a2_read_status(struct phy_device *phydev) phydev->duplex = DUPLEX_FULL; } - if (phydev->duplex == DUPLEX_FULL) { - phydev->pause = lpa & LPA_PAUSE_CAP ? 1 : 0; - phydev->asym_pause = lpa & LPA_PAUSE_ASYM ? 1 : 0; - } + phy_resolve_aneg_pause(phydev); } else { - int bmcr = phy_read(phydev, MII_BMCR); - - if (bmcr < 0) - return bmcr; - - if (bmcr & BMCR_FULLDPLX) - phydev->duplex = DUPLEX_FULL; - else - phydev->duplex = DUPLEX_HALF; - - if (bmcr & BMCR_SPEED1000) - phydev->speed = SPEED_1000; - else if (bmcr & BMCR_SPEED100) - phydev->speed = SPEED_100; - else - phydev->speed = SPEED_10; + err = genphy_read_status_fixed(phydev); + if (err < 0) + return err; phydev->pause = phydev->asym_pause = 0; linkmode_zero(phydev->lp_advertising); diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c index b1fbd1937328..28e33ece4ce1 100644 --- a/drivers/net/phy/marvell.c +++ b/drivers/net/phy/marvell.c @@ -162,19 +162,9 @@ #define MII_88E1510_GEN_CTRL_REG_1_MODE_SGMII 0x1 /* SGMII to copper */ #define MII_88E1510_GEN_CTRL_REG_1_RESET 0x8000 /* Soft reset */ -#define LPA_FIBER_1000HALF 0x40 -#define LPA_FIBER_1000FULL 0x20 - #define LPA_PAUSE_FIBER 0x180 #define LPA_PAUSE_ASYM_FIBER 0x100 -#define ADVERTISE_FIBER_1000HALF 0x40 -#define ADVERTISE_FIBER_1000FULL 0x20 - -#define ADVERTISE_PAUSE_FIBER 0x180 -#define ADVERTISE_PAUSE_ASYM_FIBER 0x100 - -#define REGISTER_LINK_STATUS 0x400 #define NB_FIBER_STATS 1 MODULE_DESCRIPTION("Marvell PHY driver"); @@ -497,16 +487,15 @@ static inline u32 linkmode_adv_to_fiber_adv_t(unsigned long *advertise) u32 result = 0; if (linkmode_test_bit(ETHTOOL_LINK_MODE_1000baseT_Half_BIT, advertise)) - result |= ADVERTISE_FIBER_1000HALF; + result |= ADVERTISE_1000XHALF; if (linkmode_test_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT, advertise)) - result |= ADVERTISE_FIBER_1000FULL; + result |= ADVERTISE_1000XFULL; if (linkmode_test_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, advertise) && linkmode_test_bit(ETHTOOL_LINK_MODE_Pause_BIT, advertise)) - result |= LPA_PAUSE_ASYM_FIBER; + result |= ADVERTISE_1000XPSE_ASYM; else if (linkmode_test_bit(ETHTOOL_LINK_MODE_Pause_BIT, advertise)) - result |= (ADVERTISE_PAUSE_FIBER - & (~ADVERTISE_PAUSE_ASYM_FIBER)); + result |= ADVERTISE_1000XPAUSE; return result; } @@ -524,7 +513,7 @@ static int marvell_config_aneg_fiber(struct phy_device *phydev) { int changed = 0; int err; - int adv, oldadv; + u16 adv; if (phydev->autoneg != AUTONEG_ENABLE) return genphy_setup_forced(phydev); @@ -533,44 +522,19 @@ static int marvell_config_aneg_fiber(struct phy_device *phydev) linkmode_and(phydev->advertising, phydev->advertising, phydev->supported); - /* Setup fiber advertisement */ - adv = phy_read(phydev, MII_ADVERTISE); - if (adv < 0) - return adv; - - oldadv = adv; - adv &= ~(ADVERTISE_FIBER_1000HALF | ADVERTISE_FIBER_1000FULL - | LPA_PAUSE_FIBER); - adv |= linkmode_adv_to_fiber_adv_t(phydev->advertising); - - if (adv != oldadv) { - err = phy_write(phydev, MII_ADVERTISE, adv); - if (err < 0) - return err; + adv = linkmode_adv_to_fiber_adv_t(phydev->advertising); + /* Setup fiber advertisement */ + err = phy_modify_changed(phydev, MII_ADVERTISE, + ADVERTISE_1000XHALF | ADVERTISE_1000XFULL | + ADVERTISE_1000XPAUSE | ADVERTISE_1000XPSE_ASYM, + adv); + if (err < 0) + return err; + if (err > 0) changed = 1; - } - - if (changed == 0) { - /* Advertisement hasn't changed, but maybe aneg was never on to - * begin with? Or maybe phy was isolated? - */ - int ctl = phy_read(phydev, MII_BMCR); - - if (ctl < 0) - return ctl; - - if (!(ctl & BMCR_ANENABLE) || (ctl & BMCR_ISOLATE)) - changed = 1; /* do restart aneg */ - } - /* Only restart aneg if we are advertising something different - * than we were before. - */ - if (changed > 0) - changed = genphy_restart_aneg(phydev); - - return changed; + return genphy_check_and_restart_aneg(phydev, changed); } static int m88e1510_config_aneg(struct phy_device *phydev) @@ -1302,93 +1266,29 @@ static int m88e6390_config_aneg(struct phy_device *phydev) static void fiber_lpa_mod_linkmode_lpa_t(unsigned long *advertising, u32 lpa) { linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseT_Half_BIT, - advertising, lpa & LPA_FIBER_1000HALF); + advertising, lpa & LPA_1000XHALF); linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT, - advertising, lpa & LPA_FIBER_1000FULL); -} - -/** - * marvell_update_link - update link status in real time in @phydev - * @phydev: target phy_device struct - * - * Description: Update the value in phydev->link to reflect the - * current link value. - */ -static int marvell_update_link(struct phy_device *phydev, int fiber) -{ - int status; - - /* Use the generic register for copper link, or specific - * register for fiber case - */ - if (fiber) { - status = phy_read(phydev, MII_M1011_PHY_STATUS); - if (status < 0) - return status; - - if ((status & REGISTER_LINK_STATUS) == 0) - phydev->link = 0; - else - phydev->link = 1; - } else { - return genphy_update_link(phydev); - } - - return 0; + advertising, lpa & LPA_1000XFULL); } static int marvell_read_status_page_an(struct phy_device *phydev, - int fiber) + int fiber, int status) { - int status; int lpa; - int lpagb; - - status = phy_read(phydev, MII_M1011_PHY_STATUS); - if (status < 0) - return status; - - lpa = phy_read(phydev, MII_LPA); - if (lpa < 0) - return lpa; - - lpagb = phy_read(phydev, MII_STAT1000); - if (lpagb < 0) - return lpagb; - - if (status & MII_M1011_PHY_STATUS_FULLDUPLEX) - phydev->duplex = DUPLEX_FULL; - else - phydev->duplex = DUPLEX_HALF; - - status = status & MII_M1011_PHY_STATUS_SPD_MASK; - phydev->pause = 0; - phydev->asym_pause = 0; - - switch (status) { - case MII_M1011_PHY_STATUS_1000: - phydev->speed = SPEED_1000; - break; - - case MII_M1011_PHY_STATUS_100: - phydev->speed = SPEED_100; - break; - - default: - phydev->speed = SPEED_10; - break; - } + int err; if (!fiber) { - mii_lpa_to_linkmode_lpa_t(phydev->lp_advertising, lpa); - mii_stat1000_mod_linkmode_lpa_t(phydev->lp_advertising, lpagb); + err = genphy_read_lpa(phydev); + if (err < 0) + return err; - if (phydev->duplex == DUPLEX_FULL) { - phydev->pause = lpa & LPA_PAUSE_CAP ? 1 : 0; - phydev->asym_pause = lpa & LPA_PAUSE_ASYM ? 1 : 0; - } + phy_resolve_aneg_pause(phydev); } else { + lpa = phy_read(phydev, MII_LPA); + if (lpa < 0) + return lpa; + /* The fiber link is only 1000M capable */ fiber_lpa_mod_linkmode_lpa_t(phydev->lp_advertising, lpa); @@ -1405,31 +1305,25 @@ static int marvell_read_status_page_an(struct phy_device *phydev, } } } - return 0; -} -static int marvell_read_status_page_fixed(struct phy_device *phydev) -{ - int bmcr = phy_read(phydev, MII_BMCR); - - if (bmcr < 0) - return bmcr; - - if (bmcr & BMCR_FULLDPLX) + if (status & MII_M1011_PHY_STATUS_FULLDUPLEX) phydev->duplex = DUPLEX_FULL; else phydev->duplex = DUPLEX_HALF; - if (bmcr & BMCR_SPEED1000) + switch (status & MII_M1011_PHY_STATUS_SPD_MASK) { + case MII_M1011_PHY_STATUS_1000: phydev->speed = SPEED_1000; - else if (bmcr & BMCR_SPEED100) + break; + + case MII_M1011_PHY_STATUS_100: phydev->speed = SPEED_100; - else - phydev->speed = SPEED_10; + break; - phydev->pause = 0; - phydev->asym_pause = 0; - linkmode_zero(phydev->lp_advertising); + default: + phydev->speed = SPEED_10; + break; + } return 0; } @@ -1444,25 +1338,38 @@ static int marvell_read_status_page_fixed(struct phy_device *phydev) */ static int marvell_read_status_page(struct phy_device *phydev, int page) { + int status; int fiber; int err; - /* Detect and update the link, but return if there - * was an error + status = phy_read(phydev, MII_M1011_PHY_STATUS); + if (status < 0) + return status; + + /* Use the generic register for copper link status, + * and the PHY status register for fiber link status. */ + if (page == MII_MARVELL_FIBER_PAGE) { + phydev->link = !!(status & MII_M1011_PHY_STATUS_LINK); + } else { + err = genphy_update_link(phydev); + if (err) + return err; + } + if (page == MII_MARVELL_FIBER_PAGE) fiber = 1; else fiber = 0; - err = marvell_update_link(phydev, fiber); - if (err) - return err; + linkmode_zero(phydev->lp_advertising); + phydev->pause = 0; + phydev->asym_pause = 0; if (phydev->autoneg == AUTONEG_ENABLE) - err = marvell_read_status_page_an(phydev, fiber); + err = marvell_read_status_page_an(phydev, fiber, status); else - err = marvell_read_status_page_fixed(phydev); + err = genphy_read_status_fixed(phydev); return err; } diff --git a/drivers/net/phy/mscc.c b/drivers/net/phy/mscc.c index d5f8f351d9ef..50214c081164 100644 --- a/drivers/net/phy/mscc.c +++ b/drivers/net/phy/mscc.c @@ -2404,7 +2404,6 @@ static struct phy_driver vsc85xx_driver[] = { .soft_reset = &genphy_soft_reset, .config_init = &vsc85xx_config_init, .config_aneg = &vsc85xx_config_aneg, - .aneg_done = &genphy_aneg_done, .read_status = &vsc85xx_read_status, .ack_interrupt = &vsc85xx_ack_interrupt, .config_intr = &vsc85xx_config_intr, @@ -2429,7 +2428,6 @@ static struct phy_driver vsc85xx_driver[] = { .soft_reset = &genphy_soft_reset, .config_init = &vsc85xx_config_init, .config_aneg = &vsc85xx_config_aneg, - .aneg_done = &genphy_aneg_done, .read_status = &vsc85xx_read_status, .ack_interrupt = &vsc85xx_ack_interrupt, .config_intr = &vsc85xx_config_intr, @@ -2454,7 +2452,6 @@ static struct phy_driver vsc85xx_driver[] = { .soft_reset = &genphy_soft_reset, .config_init = &vsc85xx_config_init, .config_aneg = &vsc85xx_config_aneg, - .aneg_done = &genphy_aneg_done, .read_status = &vsc85xx_read_status, .ack_interrupt = &vsc85xx_ack_interrupt, .config_intr = &vsc85xx_config_intr, @@ -2479,7 +2476,6 @@ static struct phy_driver vsc85xx_driver[] = { .soft_reset = &genphy_soft_reset, .config_init = &vsc85xx_config_init, .config_aneg = &vsc85xx_config_aneg, - .aneg_done = &genphy_aneg_done, .read_status = &vsc85xx_read_status, .ack_interrupt = &vsc85xx_ack_interrupt, .config_intr = &vsc85xx_config_intr, @@ -2504,7 +2500,6 @@ static struct phy_driver vsc85xx_driver[] = { .soft_reset = &genphy_soft_reset, .config_init = &vsc8584_config_init, .config_aneg = &vsc85xx_config_aneg, - .aneg_done = &genphy_aneg_done, .read_status = &vsc85xx_read_status, .ack_interrupt = &vsc85xx_ack_interrupt, .config_intr = &vsc85xx_config_intr, @@ -2530,7 +2525,6 @@ static struct phy_driver vsc85xx_driver[] = { .soft_reset = &genphy_soft_reset, .config_init = &vsc8584_config_init, .config_aneg = &vsc85xx_config_aneg, - .aneg_done = &genphy_aneg_done, .read_status = &vsc85xx_read_status, .ack_interrupt = &vsc85xx_ack_interrupt, .config_intr = &vsc85xx_config_intr, diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index 0887ed2bb050..ec19efe7ea99 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -1771,6 +1771,36 @@ int genphy_restart_aneg(struct phy_device *phydev) EXPORT_SYMBOL(genphy_restart_aneg); /** + * genphy_check_and_restart_aneg - Enable and restart auto-negotiation + * @phydev: target phy_device struct + * @restart: whether aneg restart is requested + * + * Check, and restart auto-negotiation if needed. + */ +int genphy_check_and_restart_aneg(struct phy_device *phydev, bool restart) +{ + int ret = 0; + + if (!restart) { + /* Advertisement hasn't changed, but maybe aneg was never on to + * begin with? Or maybe phy was isolated? + */ + ret = phy_read(phydev, MII_BMCR); + if (ret < 0) + return ret; + + if (!(ret & BMCR_ANENABLE) || (ret & BMCR_ISOLATE)) + restart = true; + } + + if (restart) + ret = genphy_restart_aneg(phydev); + + return ret; +} +EXPORT_SYMBOL(genphy_check_and_restart_aneg); + +/** * __genphy_config_aneg - restart auto-negotiation or write BMCR * @phydev: target phy_device struct * @changed: whether autoneg is requested @@ -1795,23 +1825,7 @@ int __genphy_config_aneg(struct phy_device *phydev, bool changed) else if (err) changed = true; - if (!changed) { - /* Advertisement hasn't changed, but maybe aneg was never on to - * begin with? Or maybe phy was isolated? - */ - int ctl = phy_read(phydev, MII_BMCR); - - if (ctl < 0) - return ctl; - - if (!(ctl & BMCR_ANENABLE) || (ctl & BMCR_ISOLATE)) - changed = true; /* do restart aneg */ - } - - /* Only restart aneg if we are advertising something different - * than we were before. - */ - return changed ? genphy_restart_aneg(phydev) : 0; + return genphy_check_and_restart_aneg(phydev, changed); } EXPORT_SYMBOL(__genphy_config_aneg); @@ -1979,6 +1993,36 @@ int genphy_read_lpa(struct phy_device *phydev) EXPORT_SYMBOL(genphy_read_lpa); /** + * genphy_read_status_fixed - read the link parameters for !aneg mode + * @phydev: target phy_device struct + * + * Read the current duplex and speed state for a PHY operating with + * autonegotiation disabled. + */ +int genphy_read_status_fixed(struct phy_device *phydev) +{ + int bmcr = phy_read(phydev, MII_BMCR); + + if (bmcr < 0) + return bmcr; + + if (bmcr & BMCR_FULLDPLX) + phydev->duplex = DUPLEX_FULL; + else + phydev->duplex = DUPLEX_HALF; + + if (bmcr & BMCR_SPEED1000) + phydev->speed = SPEED_1000; + else if (bmcr & BMCR_SPEED100) + phydev->speed = SPEED_100; + else + phydev->speed = SPEED_10; + + return 0; +} +EXPORT_SYMBOL(genphy_read_status_fixed); + +/** * genphy_read_status - check the link status and update current link state * @phydev: target phy_device struct * @@ -2012,22 +2056,9 @@ int genphy_read_status(struct phy_device *phydev) if (phydev->autoneg == AUTONEG_ENABLE && phydev->autoneg_complete) { phy_resolve_aneg_linkmode(phydev); } else if (phydev->autoneg == AUTONEG_DISABLE) { - int bmcr = phy_read(phydev, MII_BMCR); - - if (bmcr < 0) - return bmcr; - - if (bmcr & BMCR_FULLDPLX) - phydev->duplex = DUPLEX_FULL; - else - phydev->duplex = DUPLEX_HALF; - - if (bmcr & BMCR_SPEED1000) - phydev->speed = SPEED_1000; - else if (bmcr & BMCR_SPEED100) - phydev->speed = SPEED_100; - else - phydev->speed = SPEED_10; + err = genphy_read_status_fixed(phydev); + if (err < 0) + return err; } return 0; @@ -2575,7 +2606,6 @@ static struct phy_driver genphy_driver = { .name = "Generic PHY", .soft_reset = genphy_no_soft_reset, .get_features = genphy_read_abilities, - .aneg_done = genphy_aneg_done, .suspend = genphy_suspend, .resume = genphy_resume, .set_loopback = genphy_loopback, diff --git a/drivers/net/phy/uPD60620.c b/drivers/net/phy/uPD60620.c index a32b3fd8a370..38834347a427 100644 --- a/drivers/net/phy/uPD60620.c +++ b/drivers/net/phy/uPD60620.c @@ -68,12 +68,7 @@ static int upd60620_read_status(struct phy_device *phydev) mii_lpa_to_linkmode_lpa_t(phydev->lp_advertising, phy_state); - if (phydev->duplex == DUPLEX_FULL) { - if (phy_state & LPA_PAUSE_CAP) - phydev->pause = 1; - if (phy_state & LPA_PAUSE_ASYM) - phydev->asym_pause = 1; - } + phy_resolve_aneg_pause(phydev); } } return 0; diff --git a/include/linux/phy.h b/include/linux/phy.h index 5032d453ac66..b2105e0d72d3 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -1094,11 +1094,13 @@ void phy_attached_info(struct phy_device *phydev); int genphy_read_abilities(struct phy_device *phydev); int genphy_setup_forced(struct phy_device *phydev); int genphy_restart_aneg(struct phy_device *phydev); +int genphy_check_and_restart_aneg(struct phy_device *phydev, bool restart); int genphy_config_eee_advert(struct phy_device *phydev); int __genphy_config_aneg(struct phy_device *phydev, bool changed); int genphy_aneg_done(struct phy_device *phydev); int genphy_update_link(struct phy_device *phydev); int genphy_read_lpa(struct phy_device *phydev); +int genphy_read_status_fixed(struct phy_device *phydev); int genphy_read_status(struct phy_device *phydev); int genphy_suspend(struct phy_device *phydev); int genphy_resume(struct phy_device *phydev); |