diff options
| -rw-r--r-- | arch/arm/plat-omap/include/plat/mcbsp.h | 37 | ||||
| -rw-r--r-- | arch/arm/plat-omap/mcbsp.c | 214 |
2 files changed, 0 insertions, 251 deletions
diff --git a/arch/arm/plat-omap/include/plat/mcbsp.h b/arch/arm/plat-omap/include/plat/mcbsp.h index f8f690ab2997..3fc75a8fe21f 100644 --- a/arch/arm/plat-omap/include/plat/mcbsp.h +++ b/arch/arm/plat-omap/include/plat/mcbsp.h @@ -353,38 +353,6 @@ typedef enum { OMAP_MCBSP_WORD_32, } omap_mcbsp_word_length; -typedef enum { - OMAP_MCBSP_CLK_RISING = 0, - OMAP_MCBSP_CLK_FALLING, -} omap_mcbsp_clk_polarity; - -typedef enum { - OMAP_MCBSP_FS_ACTIVE_HIGH = 0, - OMAP_MCBSP_FS_ACTIVE_LOW, -} omap_mcbsp_fs_polarity; - -typedef enum { - OMAP_MCBSP_CLK_STP_MODE_NO_DELAY = 0, - OMAP_MCBSP_CLK_STP_MODE_DELAY, -} omap_mcbsp_clk_stp_mode; - - -/******* SPI specific mode **********/ -typedef enum { - OMAP_MCBSP_SPI_MASTER = 0, - OMAP_MCBSP_SPI_SLAVE, -} omap_mcbsp_spi_mode; - -struct omap_mcbsp_spi_cfg { - omap_mcbsp_spi_mode spi_mode; - omap_mcbsp_clk_polarity rx_clock_polarity; - omap_mcbsp_clk_polarity tx_clock_polarity; - omap_mcbsp_fs_polarity fsx_polarity; - u8 clk_div; - omap_mcbsp_clk_stp_mode clk_stp_mode; - omap_mcbsp_word_length word_length; -}; - /* Platform specific configuration */ struct omap_mcbsp_ops { void (*request)(unsigned int); @@ -504,14 +472,9 @@ u32 omap_mcbsp_recv_word(unsigned int id); int omap_mcbsp_xmit_buffer(unsigned int id, dma_addr_t buffer, unsigned int length); int omap_mcbsp_recv_buffer(unsigned int id, dma_addr_t buffer, unsigned int length); -int omap_mcbsp_spi_master_xmit_word_poll(unsigned int id, u32 word); -int omap_mcbsp_spi_master_recv_word_poll(unsigned int id, u32 * word); - /* McBSP functional clock source changing function */ extern int omap2_mcbsp_set_clks_src(u8 id, u8 fck_src_id); -/* SPI specific API */ -void omap_mcbsp_set_spi_mode(unsigned int id, const struct omap_mcbsp_spi_cfg * spi_cfg); /* Polled read/write functions */ int omap_mcbsp_pollread(unsigned int id, u16 * buf); diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c index 5587acf0eb2c..1de27243385f 100644 --- a/arch/arm/plat-omap/mcbsp.c +++ b/arch/arm/plat-omap/mcbsp.c @@ -1175,147 +1175,6 @@ u32 omap_mcbsp_recv_word(unsigned int id) } EXPORT_SYMBOL(omap_mcbsp_recv_word); -int omap_mcbsp_spi_master_xmit_word_poll(unsigned int id, u32 word) -{ - struct omap_mcbsp *mcbsp; - omap_mcbsp_word_length tx_word_length; - omap_mcbsp_word_length rx_word_length; - u16 spcr2, spcr1, attempts = 0, word_lsb, word_msb = 0; - - if (!omap_mcbsp_check_valid_id(id)) { - printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); - return -ENODEV; - } - mcbsp = id_to_mcbsp_ptr(id); - tx_word_length = mcbsp->tx_word_length; - rx_word_length = mcbsp->rx_word_length; - - if (tx_word_length != rx_word_length) - return -EINVAL; - - /* First we wait for the transmitter to be ready */ - spcr2 = MCBSP_READ(mcbsp, SPCR2); - while (!(spcr2 & XRDY)) { - spcr2 = MCBSP_READ(mcbsp, SPCR2); - if (attempts++ > 1000) { - /* We must reset the transmitter */ - MCBSP_WRITE(mcbsp, SPCR2, - MCBSP_READ_CACHE(mcbsp, SPCR2) & (~XRST)); - udelay(10); - MCBSP_WRITE(mcbsp, SPCR2, - MCBSP_READ_CACHE(mcbsp, SPCR2) | XRST); - udelay(10); - dev_err(mcbsp->dev, "McBSP%d transmitter not " - "ready\n", mcbsp->id); - return -EAGAIN; - } - } - - /* Now we can push the data */ - if (tx_word_length > OMAP_MCBSP_WORD_16) - MCBSP_WRITE(mcbsp, DXR2, word >> 16); - MCBSP_WRITE(mcbsp, DXR1, word & 0xffff); - - /* We wait for the receiver to be ready */ - spcr1 = MCBSP_READ(mcbsp, SPCR1); - while (!(spcr1 & RRDY)) { - spcr1 = MCBSP_READ(mcbsp, SPCR1); - if (attempts++ > 1000) { - /* We must reset the receiver */ - MCBSP_WRITE(mcbsp, SPCR1, - MCBSP_READ_CACHE(mcbsp, SPCR1) & (~RRST)); - udelay(10); - MCBSP_WRITE(mcbsp, SPCR1, - MCBSP_READ_CACHE(mcbsp, SPCR1) | RRST); - udelay(10); - dev_err(mcbsp->dev, "McBSP%d receiver not " - "ready\n", mcbsp->id); - return -EAGAIN; - } - } - - /* Receiver is ready, let's read the dummy data */ - if (rx_word_length > OMAP_MCBSP_WORD_16) - word_msb = MCBSP_READ(mcbsp, DRR2); - word_lsb = MCBSP_READ(mcbsp, DRR1); - - return 0; -} -EXPORT_SYMBOL(omap_mcbsp_spi_master_xmit_word_poll); - -int omap_mcbsp_spi_master_recv_word_poll(unsigned int id, u32 *word) -{ - struct omap_mcbsp *mcbsp; - u32 clock_word = 0; - omap_mcbsp_word_length tx_word_length; - omap_mcbsp_word_length rx_word_length; - u16 spcr2, spcr1, attempts = 0, word_lsb, word_msb = 0; - - if (!omap_mcbsp_check_valid_id(id)) { - printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); - return -ENODEV; - } - - mcbsp = id_to_mcbsp_ptr(id); - - tx_word_length = mcbsp->tx_word_length; - rx_word_length = mcbsp->rx_word_length; - - if (tx_word_length != rx_word_length) - return -EINVAL; - - /* First we wait for the transmitter to be ready */ - spcr2 = MCBSP_READ(mcbsp, SPCR2); - while (!(spcr2 & XRDY)) { - spcr2 = MCBSP_READ(mcbsp, SPCR2); - if (attempts++ > 1000) { - /* We must reset the transmitter */ - MCBSP_WRITE(mcbsp, SPCR2, - MCBSP_READ_CACHE(mcbsp, SPCR2) & (~XRST)); - udelay(10); - MCBSP_WRITE(mcbsp, SPCR2, - MCBSP_READ_CACHE(mcbsp, SPCR2) | XRST); - udelay(10); - dev_err(mcbsp->dev, "McBSP%d transmitter not " - "ready\n", mcbsp->id); - return -EAGAIN; - } - } - - /* We first need to enable the bus clock */ - if (tx_word_length > OMAP_MCBSP_WORD_16) - MCBSP_WRITE(mcbsp, DXR2, clock_word >> 16); - MCBSP_WRITE(mcbsp, DXR1, clock_word & 0xffff); - - /* We wait for the receiver to be ready */ - spcr1 = MCBSP_READ(mcbsp, SPCR1); - while (!(spcr1 & RRDY)) { - spcr1 = MCBSP_READ(mcbsp, SPCR1); - if (attempts++ > 1000) { - /* We must reset the receiver */ - MCBSP_WRITE(mcbsp, SPCR1, - MCBSP_READ_CACHE(mcbsp, SPCR1) & (~RRST)); - udelay(10); - MCBSP_WRITE(mcbsp, SPCR1, - MCBSP_READ_CACHE(mcbsp, SPCR1) | RRST); - udelay(10); - dev_err(mcbsp->dev, "McBSP%d receiver not " - "ready\n", mcbsp->id); - return -EAGAIN; - } - } - - /* Receiver is ready, there is something for us */ - if (rx_word_length > OMAP_MCBSP_WORD_16) - word_msb = MCBSP_READ(mcbsp, DRR2); - word_lsb = MCBSP_READ(mcbsp, DRR1); - - word[0] = (word_lsb | (word_msb << 16)); - - return 0; -} -EXPORT_SYMBOL(omap_mcbsp_spi_master_recv_word_poll); - /* * Simple DMA based buffer rx/tx routines. * Nothing fancy, just a single buffer tx/rx through DMA. @@ -1449,79 +1308,6 @@ int omap_mcbsp_recv_buffer(unsigned int id, dma_addr_t buffer, } EXPORT_SYMBOL(omap_mcbsp_recv_buffer); -/* - * SPI wrapper. - * Since SPI setup is much simpler than the generic McBSP one, - * this wrapper just need an omap_mcbsp_spi_cfg structure as an input. - * Once this is done, you can call omap_mcbsp_start(). - */ -void omap_mcbsp_set_spi_mode(unsigned int id, - const struct omap_mcbsp_spi_cfg *spi_cfg) -{ - struct omap_mcbsp *mcbsp; - struct omap_mcbsp_reg_cfg mcbsp_cfg; - - if (!omap_mcbsp_check_valid_id(id)) { - printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); - return; - } - mcbsp = id_to_mcbsp_ptr(id); - - memset(&mcbsp_cfg, 0, sizeof(struct omap_mcbsp_reg_cfg)); - - /* SPI has only one frame */ - mcbsp_cfg.rcr1 |= (RWDLEN1(spi_cfg->word_length) | RFRLEN1(0)); - mcbsp_cfg.xcr1 |= (XWDLEN1(spi_cfg->word_length) | XFRLEN1(0)); - - /* Clock stop mode */ - if (spi_cfg->clk_stp_mode == OMAP_MCBSP_CLK_STP_MODE_NO_DELAY) - mcbsp_cfg.spcr1 |= (1 << 12); - else - mcbsp_cfg.spcr1 |= (3 << 11); - - /* Set clock parities */ - if (spi_cfg->rx_clock_polarity == OMAP_MCBSP_CLK_RISING) - mcbsp_cfg.pcr0 |= CLKRP; - else - mcbsp_cfg.pcr0 &= ~CLKRP; - - if (spi_cfg->tx_clock_polarity == OMAP_MCBSP_CLK_RISING) - mcbsp_cfg.pcr0 &= ~CLKXP; - else - mcbsp_cfg.pcr0 |= CLKXP; - - /* Set SCLKME to 0 and CLKSM to 1 */ - mcbsp_cfg.pcr0 &= ~SCLKME; - mcbsp_cfg.srgr2 |= CLKSM; - - /* Set FSXP */ - if (spi_cfg->fsx_polarity == OMAP_MCBSP_FS_ACTIVE_HIGH) - mcbsp_cfg.pcr0 &= ~FSXP; - else - mcbsp_cfg.pcr0 |= FSXP; - - if (spi_cfg->spi_mode == OMAP_MCBSP_SPI_MASTER) { - mcbsp_cfg.pcr0 |= CLKXM; - mcbsp_cfg.srgr1 |= CLKGDV(spi_cfg->clk_div - 1); - mcbsp_cfg.pcr0 |= FSXM; - mcbsp_cfg.srgr2 &= ~FSGM; - mcbsp_cfg.xcr2 |= XDATDLY(1); - mcbsp_cfg.rcr2 |= RDATDLY(1); - } else { - mcbsp_cfg.pcr0 &= ~CLKXM; - mcbsp_cfg.srgr1 |= CLKGDV(1); - mcbsp_cfg.pcr0 &= ~FSXM; - mcbsp_cfg.xcr2 &= ~XDATDLY(3); - mcbsp_cfg.rcr2 &= ~RDATDLY(3); - } - - mcbsp_cfg.xcr2 &= ~XPHASE; - mcbsp_cfg.rcr2 &= ~RPHASE; - - omap_mcbsp_config(id, &mcbsp_cfg); -} -EXPORT_SYMBOL(omap_mcbsp_set_spi_mode); - #ifdef CONFIG_ARCH_OMAP3 #define max_thres(m) (mcbsp->pdata->buffer_size) #define valid_threshold(m, val) ((val) <= max_thres(m)) |