1551 files changed, 37075 insertions, 20003 deletions

diff --git a/CREDITS b/CREDITS
index 787564bc248b..9bf714a1c7d9 100644
--- a/CREDITS
+++ b/CREDITS
@@ -1194,15 +1194,9 @@ S: Brecksville, OH  44141-1334
 S: USA
 
 N: Tristan Greaves
-E: Tristan.Greaves@icl.com
-E: tmg296@ecs.soton.ac.uk
-W: http://www.ecs.soton.ac.uk/~tmg296
+E: tristan@extricate.org
+W: http://www.extricate.org/
 D: Miscellaneous ipv4 sysctl patches
-S: 15 Little Mead
-S: Denmead
-S: Hampshire
-S: PO7 6HS
-S: United Kingdom
 
 N: Michael A. Griffith
 E: grif@cs.ucr.edu
@@ -3247,14 +3241,9 @@ S: 12725 SW Millikan Way, Suite 400
 S: Beaverton, Oregon 97005
 S: USA
 
-N: Marcelo W. Tosatti
-E: marcelo.tosatti@cyclades.com
-D: Miscellaneous kernel hacker
+N: Marcelo Tosatti
+E: marcelo@kvack.org
 D: v2.4 kernel maintainer
-D: Current pc300/cyclades maintainer
-S: Cyclades Corporation
-S: Av Cristovao Colombo, 462. Floresta.
-S: Porto Alegre
 S: Brazil
 
 N: Stefan Traby
diff --git a/Documentation/DMA-API.txt b/Documentation/DMA-API.txt
index 1af0f2d50220..2ffb0d62f0fe 100644
--- a/Documentation/DMA-API.txt
+++ b/Documentation/DMA-API.txt
@@ -33,7 +33,9 @@ pci_alloc_consistent(struct pci_dev *dev, size_t size,
 
 Consistent memory is memory for which a write by either the device or
 the processor can immediately be read by the processor or device
-without having to worry about caching effects.
+without having to worry about caching effects.  (You may however need
+to make sure to flush the processor's write buffers before telling
+devices to read that memory.)
 
 This routine allocates a region of <size> bytes of consistent memory.
 it also returns a <dma_handle> which may be cast to an unsigned
@@ -304,12 +306,12 @@ dma address with dma_mapping_error(). A non zero return value means the mapping
 could not be created and the driver should take appropriate action (eg
 reduce current DMA mapping usage or delay and try again later).
 
-int
-dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
-	   enum dma_data_direction direction)
-int
-pci_map_sg(struct pci_dev *hwdev, struct scatterlist *sg,
-	   int nents, int direction)
+	int
+	dma_map_sg(struct device *dev, struct scatterlist *sg,
+		int nents, enum dma_data_direction direction)
+	int
+	pci_map_sg(struct pci_dev *hwdev, struct scatterlist *sg,
+		int nents, int direction)
 
 Maps a scatter gather list from the block layer.
 
@@ -327,12 +329,33 @@ critical that the driver do something, in the case of a block driver
 aborting the request or even oopsing is better than doing nothing and
 corrupting the filesystem.
 
-void
-dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries,
-	     enum dma_data_direction direction)
-void
-pci_unmap_sg(struct pci_dev *hwdev, struct scatterlist *sg,
-	     int nents, int direction)
+With scatterlists, you use the resulting mapping like this:
+
+	int i, count = dma_map_sg(dev, sglist, nents, direction);
+	struct scatterlist *sg;
+
+	for (i = 0, sg = sglist; i < count; i++, sg++) {
+		hw_address[i] = sg_dma_address(sg);
+		hw_len[i] = sg_dma_len(sg);
+	}
+
+where nents is the number of entries in the sglist.
+
+The implementation is free to merge several consecutive sglist entries
+into one (e.g. with an IOMMU, or if several pages just happen to be
+physically contiguous) and returns the actual number of sg entries it
+mapped them to. On failure 0, is returned.
+
+Then you should loop count times (note: this can be less than nents times)
+and use sg_dma_address() and sg_dma_len() macros where you previously
+accessed sg->address and sg->length as shown above.
+
+	void
+	dma_unmap_sg(struct device *dev, struct scatterlist *sg,
+		int nhwentries, enum dma_data_direction direction)
+	void
+	pci_unmap_sg(struct pci_dev *hwdev, struct scatterlist *sg,
+		int nents, int direction)
 
 unmap the previously mapped scatter/gather list.  All the parameters
 must be the same as those and passed in to the scatter/gather mapping
diff --git a/Documentation/DMA-mapping.txt b/Documentation/DMA-mapping.txt
index 10bf4deb96aa..7c717699032c 100644
--- a/Documentation/DMA-mapping.txt
+++ b/Documentation/DMA-mapping.txt
@@ -58,11 +58,15 @@ translating each of those pages back to a kernel address using
 something like __va().  [ EDIT: Update this when we integrate
 Gerd Knorr's generic code which does this. ]
 
-This rule also means that you may not use kernel image addresses
-(ie. items in the kernel's data/text/bss segment, or your driver's)
-nor may you use kernel stack addresses for DMA.  Both of these items
-might be mapped somewhere entirely different than the rest of physical
-memory.
+This rule also means that you may use neither kernel image addresses
+(items in data/text/bss segments), nor module image addresses, nor
+stack addresses for DMA.  These could all be mapped somewhere entirely
+different than the rest of physical memory.  Even if those classes of
+memory could physically work with DMA, you'd need to ensure the I/O
+buffers were cacheline-aligned.  Without that, you'd see cacheline
+sharing problems (data corruption) on CPUs with DMA-incoherent caches.
+(The CPU could write to one word, DMA would write to a different one
+in the same cache line, and one of them could be overwritten.)
 
 Also, this means that you cannot take the return of a kmap()
 call and DMA to/from that.  This is similar to vmalloc().
@@ -284,6 +288,11 @@ There are two types of DMA mappings:
 
              in order to get correct behavior on all platforms.
 
+	     Also, on some platforms your driver may need to flush CPU write
+	     buffers in much the same way as it needs to flush write buffers
+	     found in PCI bridges (such as by reading a register's value
+	     after writing it).
+
 - Streaming DMA mappings which are usually mapped for one DMA transfer,
   unmapped right after it (unless you use pci_dma_sync_* below) and for which
   hardware can optimize for sequential accesses.
@@ -303,6 +312,9 @@ There are two types of DMA mappings:
 
 Neither type of DMA mapping has alignment restrictions that come
 from PCI, although some devices may have such restrictions.
+Also, systems with caches that aren't DMA-coherent will work better
+when the underlying buffers don't share cache lines with other data.
+
 
 		 Using Consistent DMA mappings.
 
diff --git a/Documentation/HOWTO b/Documentation/HOWTO
index 6c9e746267da..915ae8c986c6 100644
--- a/Documentation/HOWTO
+++ b/Documentation/HOWTO
@@ -603,7 +603,8 @@ start exactly where you are now.
 
 
 ----------
-Thanks to Paolo Ciarrocchi who allowed the "Development Process" section
+Thanks to Paolo Ciarrocchi who allowed the "Development Process"
+(http://linux.tar.bz/articles/2.6-development_process) section
 to be based on text he had written, and to Randy Dunlap and Gerrit
 Huizenga for some of the list of things you should and should not say.
 Also thanks to Pat Mochel, Hanna Linder, Randy Dunlap, Kay Sievers,
diff --git a/Documentation/block/switching-sched.txt b/Documentation/block/switching-sched.txt
new file mode 100644
index 000000000000..5fa130a67531
--- /dev/null
+++ b/Documentation/block/switching-sched.txt
@@ -0,0 +1,22 @@
+As of the Linux 2.6.10 kernel, it is now possible to change the
+IO scheduler for a given block device on the fly (thus making it possible,
+for instance, to set the CFQ scheduler for the system default, but
+set a specific device to use the anticipatory or noop schedulers - which
+can improve that device's throughput).
+
+To set a specific scheduler, simply do this:
+
+echo SCHEDNAME > /sys/block/DEV/queue/scheduler
+
+where SCHEDNAME is the name of a defined IO scheduler, and DEV is the
+device name (hda, hdb, sga, or whatever you happen to have).
+
+The list of defined schedulers can be found by simply doing
+a "cat /sys/block/DEV/queue/scheduler" - the list of valid names
+will be displayed, with the currently selected scheduler in brackets:
+
+# cat /sys/block/hda/queue/scheduler
+noop anticipatory deadline [cfq]
+# echo anticipatory > /sys/block/hda/queue/scheduler
+# cat /sys/block/hda/queue/scheduler
+noop [anticipatory] deadline cfq
diff --git a/Documentation/cpu-freq/index.txt b/Documentation/cpu-freq/index.txt
index 5009805f9378..ffdb5323df37 100644
--- a/Documentation/cpu-freq/index.txt
+++ b/Documentation/cpu-freq/index.txt
@@ -53,4 +53,4 @@ the CPUFreq Mailing list:
 * http://lists.linux.org.uk/mailman/listinfo/cpufreq
 
 Clock and voltage scaling for the SA-1100:
-* http://www.lart.tudelft.nl/projects/scaling
+* http://www.lartmaker.nl/projects/scaling
diff --git a/Documentation/devices.txt b/Documentation/devices.txt
index 3c406acd4dfa..b369a8c46a73 100644
--- a/Documentation/devices.txt
+++ b/Documentation/devices.txt
@@ -1721,11 +1721,6 @@ Your cooperation is appreciated.
 		These devices support the same API as the generic SCSI
 		devices.
 
- 97 block	Packet writing for CD/DVD devices
-		  0 = /dev/pktcdvd0	First packet-writing module
-		  1 = /dev/pktcdvd1	Second packet-writing module
-		    ...
-
  98 char	Control and Measurement Device (comedi)
 		  0 = /dev/comedi0	First comedi device
 		  1 = /dev/comedi1	Second comedi device
diff --git a/Documentation/dvb/get_dvb_firmware b/Documentation/dvb/get_dvb_firmware
index 15fc8fbef67e..4820366b6ae8 100644
--- a/Documentation/dvb/get_dvb_firmware
+++ b/Documentation/dvb/get_dvb_firmware
@@ -259,9 +259,9 @@ sub dibusb {
 }
 
 sub nxt2002 {
-    my $sourcefile = "Broadband4PC_4_2_11.zip";
+    my $sourcefile = "Technisat_DVB-PC_4_4_COMPACT.zip";
     my $url = "http://www.bbti.us/download/windows/$sourcefile";
-    my $hash = "c6d2ea47a8f456d887ada0cfb718ff2a";
+    my $hash = "476befae8c7c1bb9648954060b1eec1f";
     my $outfile = "dvb-fe-nxt2002.fw";
     my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1);
 
@@ -269,8 +269,8 @@ sub nxt2002 {
 
     wgetfile($sourcefile, $url);
     unzip($sourcefile, $tmpdir);
-    verify("$tmpdir/SkyNETU.sys", $hash);
-    extract("$tmpdir/SkyNETU.sys", 375832, 5908, $outfile);
+    verify("$tmpdir/SkyNET.sys", $hash);
+    extract("$tmpdir/SkyNET.sys", 331624, 5908, $outfile);
 
     $outfile;
 }
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 293fed113dff..43ab119963d5 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -25,8 +25,9 @@ Who:	Adrian Bunk <bunk@stusta.de>
 
 ---------------------------
 
-What:	drivers depending on OBSOLETE_OSS_DRIVER
-When:	January 2006
+What:	drivers that were depending on OBSOLETE_OSS_DRIVER
+        (config options already removed)
+When:	before 2.6.19
 Why:	OSS drivers with ALSA replacements
 Who:	Adrian Bunk <bunk@stusta.de>
 
@@ -56,6 +57,15 @@ Who:	Jody McIntyre <scjody@steamballoon.com>
 
 ---------------------------
 
+What:	sbp2: module parameter "force_inquiry_hack"
+When:	July 2006
+Why:	Superceded by parameter "workarounds". Both parameters are meant to be
+	used ad-hoc and for single devices only, i.e. not in modprobe.conf,
+	therefore the impact of this feature replacement should be low.
+Who:	Stefan Richter <stefanr@s5r6.in-berlin.de>
+
+---------------------------
+
 What:	Video4Linux API 1 ioctls and video_decoder.h from Video devices.
 When:	July 2006
 Why:	V4L1 AP1 was replaced by V4L2 API. during migration from 2.4 to 2.6
diff --git a/Documentation/filesystems/sysfs.txt b/Documentation/filesystems/sysfs.txt
index c8bce82ddcac..89b1d196ca80 100644
--- a/Documentation/filesystems/sysfs.txt
+++ b/Documentation/filesystems/sysfs.txt
@@ -246,6 +246,7 @@ class/
 devices/
 firmware/
 net/
+fs/
 
 devices/ contains a filesystem representation of the device tree. It maps
 directly to the internal kernel device tree, which is a hierarchy of
@@ -264,6 +265,10 @@ drivers/ contains a directory for each device driver that is loaded
 for devices on that particular bus (this assumes that drivers do not
 span multiple bus types).
 
+fs/ contains a directory for some filesystems.  Currently each
+filesystem wanting to export attributes must create its own hierarchy
+below fs/ (see ./fuse.txt for an example).
+
 
 More information can driver-model specific features can be found in
 Documentation/driver-model/. 
diff --git a/Documentation/firmware_class/README b/Documentation/firmware_class/README
index 43e836c07ae8..e9cc8bb26f7d 100644
--- a/Documentation/firmware_class/README
+++ b/Documentation/firmware_class/README
@@ -105,20 +105,3 @@
    on the setup, so I think that the choice on what firmware to make
    persistent should be left to userspace.
 
- - Why register_firmware()+__init can be useful:
- 	- For boot devices needing firmware.
-	- To make the transition easier:
-		The firmware can be declared __init and register_firmware()
-		called on module_init. Then the firmware is warranted to be
-		there even if "firmware hotplug userspace" is not there yet or
-		it doesn't yet provide the needed firmware.
-		Once the firmware is widely available in userspace, it can be
-		removed from the kernel. Or made optional (CONFIG_.*_FIRMWARE).
-
-	In either case, if firmware hotplug support is there, it can move the
-	firmware out of kernel memory into the real filesystem for later
-	usage.
-
-	Note: If persistence is implemented on top of initramfs,
-	register_firmware() may not be appropriate.
-
diff --git a/Documentation/firmware_class/firmware_sample_driver.c b/Documentation/firmware_class/firmware_sample_driver.c
index ad3edaba4533..87feccdb5c9f 100644
--- a/Documentation/firmware_class/firmware_sample_driver.c
+++ b/Documentation/firmware_class/firmware_sample_driver.c
@@ -5,8 +5,6 @@
  *
  * Sample code on how to use request_firmware() from drivers.
  *
- * Note that register_firmware() is currently useless.
- *
  */
 
 #include <linux/module.h>
@@ -17,11 +15,6 @@
 
 #include "linux/firmware.h"
 
-#define WE_CAN_NEED_FIRMWARE_BEFORE_USERSPACE_IS_AVAILABLE
-#ifdef WE_CAN_NEED_FIRMWARE_BEFORE_USERSPACE_IS_AVAILABLE
-char __init inkernel_firmware[] = "let's say that this is firmware\n";
-#endif
-
 static struct device ghost_device = {
 	.bus_id    = "ghost0",
 };
@@ -104,10 +97,6 @@ static void sample_probe_async(void)
 
 static int sample_init(void)
 {
-#ifdef WE_CAN_NEED_FIRMWARE_BEFORE_USERSPACE_IS_AVAILABLE
-	register_firmware("sample_driver_fw", inkernel_firmware,
-			  sizeof(inkernel_firmware));
-#endif
 	device_initialize(&ghost_device);
 	/* since there is no real hardware insertion I just call the
 	 * sample probe functions here */
diff --git a/Documentation/i2c/busses/i2c-parport b/Documentation/i2c/busses/i2c-parport
index d9f23c0763f1..77b995dfca22 100644
--- a/Documentation/i2c/busses/i2c-parport
+++ b/Documentation/i2c/busses/i2c-parport
@@ -12,18 +12,22 @@ meant as a replacement for the older, individual drivers:
                       teletext adapters)
 
 It currently supports the following devices:
- * Philips adapter
- * home brew teletext adapter
- * Velleman K8000 adapter
- * ELV adapter
- * Analog Devices evaluation boards (ADM1025, ADM1030, ADM1031, ADM1032)
- * Barco LPT->DVI (K5800236) adapter
+ * (type=0) Philips adapter
+ * (type=1) home brew teletext adapter
+ * (type=2) Velleman K8000 adapter
+ * (type=3) ELV adapter
+ * (type=4) Analog Devices ADM1032 evaluation board
+ * (type=5) Analog Devices evaluation boards: ADM1025, ADM1030, ADM1031
+ * (type=6) Barco LPT->DVI (K5800236) adapter
 
 These devices use different pinout configurations, so you have to tell
 the driver what you have, using the type module parameter. There is no
 way to autodetect the devices. Support for different pinout configurations
 can be easily added when needed.
 
+Earlier kernels defaulted to type=0 (Philips).  But now, if the type
+parameter is missing, the driver will simply fail to initialize.
+
 
 Building your own adapter
 -------------------------
diff --git a/Documentation/memory-barriers.txt b/Documentation/memory-barriers.txt
index 92f0056d928c..c61d8b876fdb 100644
--- a/Documentation/memory-barriers.txt
+++ b/Documentation/memory-barriers.txt
@@ -1031,7 +1031,7 @@ conflict on any particular lock.
 LOCKS VS MEMORY ACCESSES
 ------------------------
 
-Consider the following: the system has a pair of spinlocks (N) and (Q), and
+Consider the following: the system has a pair of spinlocks (M) and (Q), and
 three CPUs; then should the following sequence of events occur:
 
 	CPU 1				CPU 2
@@ -1678,7 +1678,7 @@ CPU's caches by some other cache event:
 	smp_wmb();
 	<A:modify v=2>	<C:busy>
 			<C:queue v=2>
-	p = &b;		q = p;
+	p = &v;		q = p;
 			<D:request p>
 	<B:modify p=&v>	<D:commit p=&v>
 		  	<D:read p>
diff --git a/Documentation/networking/operstates.txt b/Documentation/networking/operstates.txt
new file mode 100644
index 000000000000..4a21d9bb836b
--- /dev/null
+++ b/Documentation/networking/operstates.txt
@@ -0,0 +1,161 @@
+
+1. Introduction
+
+Linux distinguishes between administrative and operational state of an
+interface. Admininstrative state is the result of "ip link set dev
+<dev> up or down" and reflects whether the administrator wants to use
+the device for traffic.
+
+However, an interface is not usable just because the admin enabled it
+- ethernet requires to be plugged into the switch and, depending on
+a site's networking policy and configuration, an 802.1X authentication
+to be performed before user data can be transferred. Operational state
+shows the ability of an interface to transmit this user data.
+
+Thanks to 802.1X, userspace must be granted the possibility to
+influence operational state. To accommodate this, operational state is
+split into two parts: Two flags that can be set by the driver only, and
+a RFC2863 compatible state that is derived from these flags, a policy,
+and changeable from userspace under certain rules.
+
+
+2. Querying from userspace
+
+Both admin and operational state can be queried via the netlink
+operation RTM_GETLINK. It is also possible to subscribe to RTMGRP_LINK
+to be notified of updates. This is important for setting from userspace.
+
+These values contain interface state:
+
+ifinfomsg::if_flags & IFF_UP:
+ Interface is admin up
+ifinfomsg::if_flags & IFF_RUNNING:
+ Interface is in RFC2863 operational state UP or UNKNOWN. This is for
+ backward compatibility, routing daemons, dhcp clients can use this
+ flag to determine whether they should use the interface.
+ifinfomsg::if_flags & IFF_LOWER_UP:
+ Driver has signaled netif_carrier_on()
+ifinfomsg::if_flags & IFF_DORMANT:
+ Driver has signaled netif_dormant_on()
+
+These interface flags can also be queried without netlink using the
+SIOCGIFFLAGS ioctl.
+
+TLV IFLA_OPERSTATE
+
+contains RFC2863 state of the interface in numeric representation:
+
+IF_OPER_UNKNOWN (0):
+ Interface is in unknown state, neither driver nor userspace has set
+ operational state. Interface must be considered for user data as
+ setting operational state has not been implemented in every driver.
+IF_OPER_NOTPRESENT (1):
+ Unused in current kernel (notpresent interfaces normally disappear),
+ just a numerical placeholder.
+IF_OPER_DOWN (2):
+ Interface is unable to transfer data on L1, f.e. ethernet is not
+ plugged or interface is ADMIN down.
+IF_OPER_LOWERLAYERDOWN (3):
+ Interfaces stacked on an interface that is IF_OPER_DOWN show this
+ state (f.e. VLAN).
+IF_OPER_TESTING (4):
+ Unused in current kernel.
+IF_OPER_DORMANT (5):
+ Interface is L1 up, but waiting for an external event, f.e. for a
+ protocol to establish. (802.1X)
+IF_OPER_UP (6):
+ Interface is operational up and can be used.
+
+This TLV can also be queried via sysfs.
+
+TLV IFLA_LINKMODE
+
+contains link policy. This is needed for userspace interaction
+described below.
+
+This TLV can also be queried via sysfs.
+
+
+3. Kernel driver API
+
+Kernel drivers have access to two flags that map to IFF_LOWER_UP and
+IFF_DORMANT. These flags can be set from everywhere, even from
+interrupts. It is guaranteed that only the driver has write access,
+however, if different layers of the driver manipulate the same flag,
+the driver has to provide the synchronisation needed.
+
+__LINK_STATE_NOCARRIER, maps to !IFF_LOWER_UP:
+
+The driver uses netif_carrier_on() to clear and netif_carrier_off() to
+set this flag. On netif_carrier_off(), the scheduler stops sending
+packets. The name 'carrier' and the inversion are historical, think of
+it as lower layer.
+
+netif_carrier_ok() can be used to query that bit.
+
+__LINK_STATE_DORMANT, maps to IFF_DORMANT:
+
+Set by the driver to express that the device cannot yet be used
+because some driver controlled protocol establishment has to
+complete. Corresponding functions are netif_dormant_on() to set the
+flag, netif_dormant_off() to clear it and netif_dormant() to query.
+
+On device allocation, networking core sets the flags equivalent to
+netif_carrier_ok() and !netif_dormant().
+
+
+Whenever the driver CHANGES one of these flags, a workqueue event is
+scheduled to translate the flag combination to IFLA_OPERSTATE as
+follows:
+
+!netif_carrier_ok():
+ IF_OPER_LOWERLAYERDOWN if the interface is stacked, IF_OPER_DOWN
+ otherwise. Kernel can recognise stacked interfaces because their
+ ifindex != iflink.
+
+netif_carrier_ok() && netif_dormant():
+ IF_OPER_DORMANT
+
+netif_carrier_ok() && !netif_dormant():
+ IF_OPER_UP if userspace interaction is disabled. Otherwise
+ IF_OPER_DORMANT with the possibility for userspace to initiate the
+ IF_OPER_UP transition afterwards.
+
+
+4. Setting from userspace
+
+Applications have to use the netlink interface to influence the
+RFC2863 operational state of an interface. Setting IFLA_LINKMODE to 1
+via RTM_SETLINK instructs the kernel that an interface should go to
+IF_OPER_DORMANT instead of IF_OPER_UP when the combination
+netif_carrier_ok() && !netif_dormant() is set by the
+driver. Afterwards, the userspace application can set IFLA_OPERSTATE
+to IF_OPER_DORMANT or IF_OPER_UP as long as the driver does not set
+netif_carrier_off() or netif_dormant_on(). Changes made by userspace
+are multicasted on the netlink group RTMGRP_LINK.
+
+So basically a 802.1X supplicant interacts with the kernel like this:
+
+-subscribe to RTMGRP_LINK
+-set IFLA_LINKMODE to 1 via RTM_SETLINK
+-query RTM_GETLINK once to get initial state
+-if initial flags are not (IFF_LOWER_UP && !IFF_DORMANT), wait until
+ netlink multicast signals this state
+-do 802.1X, eventually abort if flags go down again
+-send RTM_SETLINK to set operstate to IF_OPER_UP if authentication
+ succeeds, IF_OPER_DORMANT otherwise
+-see how operstate and IFF_RUNNING is echoed via netlink multicast
+-set interface back to IF_OPER_DORMANT if 802.1X reauthentication
+ fails
+-restart if kernel changes IFF_LOWER_UP or IFF_DORMANT flag
+
+if supplicant goes down, bring back IFLA_LINKMODE to 0 and
+IFLA_OPERSTATE to a sane value.
+
+A routing daemon or dhcp client just needs to care for IFF_RUNNING or
+waiting for operstate to go IF_OPER_UP/IF_OPER_UNKNOWN before
+considering the interface / querying a DHCP address.
+
+
+For technical questions and/or comments please e-mail to Stefan Rompf
+(stefan at loplof.de).
diff --git a/Documentation/networking/xfrm_sync.txt b/Documentation/networking/xfrm_sync.txt
new file mode 100644
index 000000000000..8be626f7c0b8
--- /dev/null
+++ b/Documentation/networking/xfrm_sync.txt
@@ -0,0 +1,166 @@
+
+The sync patches work is based on initial patches from
+Krisztian <hidden@balabit.hu> and others and additional patches
+from Jamal <hadi@cyberus.ca>.
+
+The end goal for syncing is to be able to insert attributes + generate
+events so that the an SA can be safely moved from one machine to another
+for HA purposes.
+The idea is to synchronize the SA so that the takeover machine can do
+the processing of the SA as accurate as possible if it has access to it.
+
+We already have the ability to generate SA add/del/upd events.
+These patches add ability to sync and have accurate lifetime byte (to
+ensure proper decay of SAs) and replay counters to avoid replay attacks
+with as minimal loss at failover time.
+This way a backup stays as closely uptodate as an active member.
+
+Because the above items change for every packet the SA receives,
+it is possible for a lot of the events to be generated.
+For this reason, we also add a nagle-like algorithm to restrict
+the events. i.e we are going to set thresholds to say "let me
+know if the replay sequence threshold is reached or 10 secs have passed"
+These thresholds are set system-wide via sysctls or can be updated
+per SA.
+
+The identified items that need to be synchronized are:
+- the lifetime byte counter
+note that: lifetime time limit is not important if you assume the failover
+machine is known ahead of time since the decay of the time countdown
+is not driven by packet arrival.
+- the replay sequence for both inbound and outbound
+
+1) Message Structure
+----------------------
+
+nlmsghdr:aevent_id:optional-TLVs.
+
+The netlink message types are:
+
+XFRM_MSG_NEWAE and XFRM_MSG_GETAE.
+
+A XFRM_MSG_GETAE does not have TLVs.
+A XFRM_MSG_NEWAE will have at least two TLVs (as is
+discussed further below).
+
+aevent_id structure looks like:
+
+   struct xfrm_aevent_id {
+             struct xfrm_usersa_id           sa_id;
+             __u32                           flags;
+   };
+
+xfrm_usersa_id in this message layout identifies the SA.
+
+flags are used to indicate different things. The possible
+flags are:
+        XFRM_AE_RTHR=1, /* replay threshold*/
+        XFRM_AE_RVAL=2, /* replay value */
+        XFRM_AE_LVAL=4, /* lifetime value */
+        XFRM_AE_ETHR=8, /* expiry timer threshold */
+        XFRM_AE_CR=16, /* Event cause is replay update */
+        XFRM_AE_CE=32, /* Event cause is timer expiry */
+        XFRM_AE_CU=64, /* Event cause is policy update */
+
+How these flags are used is dependent on the direction of the
+message (kernel<->user) as well the cause (config, query or event).
+This is described below in the different messages.
+
+The pid will be set appropriately in netlink to recognize direction
+(0 to the kernel and pid = processid that created the event
+when going from kernel to user space)
+
+A program needs to subscribe to multicast group XFRMNLGRP_AEVENTS
+to get notified of these events.
+
+2) TLVS reflect the different parameters:
+-----------------------------------------
+
+a) byte value (XFRMA_LTIME_VAL)
+This TLV carries the running/current counter for byte lifetime since
+last event.
+
+b)replay value (XFRMA_REPLAY_VAL)
+This TLV carries the running/current counter for replay sequence since
+last event.
+
+c)replay threshold (XFRMA_REPLAY_THRESH)
+This TLV carries the threshold being used by the kernel to trigger events
+when the replay sequence is exceeded.
+
+d) expiry timer (XFRMA_ETIMER_THRESH)
+This is a timer value in milliseconds which is used as the nagle
+value to rate limit the events.
+
+3) Default configurations for the parameters:
+----------------------------------------------
+
+By default these events should be turned off unless there is
+at least one listener registered to listen to the multicast
+group XFRMNLGRP_AEVENTS.
+
+Programs installing SAs will need to specify the two thresholds, however,
+in order to not change existing applications such as racoon
+we also provide default threshold values for these different parameters
+in case they are not specified.
+
+the two sysctls/proc entries are:
+a) /proc/sys/net/core/sysctl_xfrm_aevent_etime
+used to provide default values for the XFRMA_ETIMER_THRESH in incremental
+units of time of 100ms. The default is 10 (1 second)
+
+b) /proc/sys/net/core/sysctl_xfrm_aevent_rseqth
+used to provide default values for XFRMA_REPLAY_THRESH parameter
+in incremental packet count. The default is two packets.
+
+4) Message types
+----------------
+
+a) XFRM_MSG_GETAE issued by user-->kernel.
+XFRM_MSG_GETAE does not carry any TLVs.
+The response is a XFRM_MSG_NEWAE which is formatted based on what
+XFRM_MSG_GETAE queried for.
+The response will always have XFRMA_LTIME_VAL and XFRMA_REPLAY_VAL TLVs.
+*if XFRM_AE_RTHR flag is set, then XFRMA_REPLAY_THRESH is also retrieved
+*if XFRM_AE_ETHR flag is set, then XFRMA_ETIMER_THRESH is also retrieved
+
+b) XFRM_MSG_NEWAE is issued by either user space to configure
+or kernel to announce events or respond to a XFRM_MSG_GETAE.
+
+i) user --> kernel to configure a specific SA.
+any of the values or threshold parameters can be updated by passing the
+appropriate TLV.
+A response is issued back to the sender in user space to indicate success
+or failure.
+In the case of success, additionally an event with
+XFRM_MSG_NEWAE is also issued to any listeners as described in iii).
+
+ii) kernel->user direction as a response to XFRM_MSG_GETAE
+The response will always have XFRMA_LTIME_VAL and XFRMA_REPLAY_VAL TLVs.
+The threshold TLVs will be included if explicitly requested in
+the XFRM_MSG_GETAE message.
+
+iii) kernel->user to report as event if someone sets any values or
+thresholds for an SA using XFRM_MSG_NEWAE (as described in #i above).
+In such a case XFRM_AE_CU flag is set to inform the user that
+the change happened as a result of an update.
+The message will always have XFRMA_LTIME_VAL and XFRMA_REPLAY_VAL TLVs.
+
+iv) kernel->user to report event when replay threshold or a timeout
+is exceeded.
+In such a case either XFRM_AE_CR (replay exceeded) or XFRM_AE_CE (timeout
+happened) is set to inform the user what happened.
+Note the two flags are mutually exclusive.
+The message will always have XFRMA_LTIME_VAL and XFRMA_REPLAY_VAL TLVs.
+
+Exceptions to threshold settings
+--------------------------------
+
+If you have an SA that is getting hit by traffic in bursts such that
+there is a period where the timer threshold expires with no packets
+seen, then an odd behavior is seen as follows:
+The first packet arrival after a timer expiry will trigger a timeout
+aevent; i.e we dont wait for a timeout period or a packet threshold
+to be reached. This is done for simplicity and efficiency reasons.
+
+-JHS
diff --git a/Documentation/pci.txt b/Documentation/pci.txt
index 711210b38f5f..66bbbf1d1ef6 100644
--- a/Documentation/pci.txt
+++ b/Documentation/pci.txt
@@ -259,7 +259,17 @@ on the bus need to be capable of doing it, so this is something which needs
 to be handled by platform and generic code, not individual drivers.
 
 
-8. Obsolete functions
+8. Vendor and device identifications
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+For the future, let's avoid adding device ids to include/linux/pci_ids.h.
+
+PCI_VENDOR_ID_xxx for vendors, and a hex constant for device ids.
+
+Rationale:  PCI_VENDOR_ID_xxx constants are re-used, but device ids are not.
+    Further, device ids are arbitrary hex numbers, normally used only in a
+    single location, the pci_device_id table.
+
+9. Obsolete functions
 ~~~~~~~~~~~~~~~~~~~~~
 There are several functions which you might come across when trying to
 port an old driver to the new PCI interface.  They are no longer present
diff --git a/Documentation/power/video.txt b/Documentation/power/video.txt
index d18a57d1a531..43a889f8f08d 100644
--- a/Documentation/power/video.txt
+++ b/Documentation/power/video.txt
@@ -140,7 +140,7 @@ IBM TP T41p			s3_bios (2), switch to X after resume
 IBM TP T42			s3_bios (2)
 IBM ThinkPad T42p (2373-GTG)	s3_bios (2)
 IBM TP X20			??? (*)
-IBM TP X30			s3_bios (2)
+IBM TP X30			s3_bios, s3_mode (4)
 IBM TP X31 / Type 2672-XXH      none (1), use radeontool (http://fdd.com/software/radeon/) to turn off backlight.
 IBM TP X32			none (1), but backlight is on and video is trashed after long suspend. s3_bios,s3_mode (4) works too. Perhaps that gets better results?
 IBM Thinkpad X40 Type 2371-7JG  s3_bios,s3_mode (4)
diff --git a/Documentation/scsi/ChangeLog.megaraid b/Documentation/scsi/ChangeLog.megaraid
index 09f6300eda4b..c173806c91fa 100644
--- a/Documentation/scsi/ChangeLog.megaraid
+++ b/Documentation/scsi/ChangeLog.megaraid
@@ -1,3 +1,28 @@
+Release Date	: Mon Apr 11 12:27:22 EST 2006 - Seokmann Ju <sju@lsil.com>
+Current Version : 2.20.4.8 (scsi module), 2.20.2.6 (cmm module)
+Older Version	: 2.20.4.7 (scsi module), 2.20.2.6 (cmm module)
+
+1.	Fixed a bug in megaraid_reset_handler().
+	Customer reported "Unable to handle kernel NULL pointer dereference
+	at virtual address 00000000" when system goes to reset condition
+	for some reason. It happened randomly.
+	Root Cause: in the megaraid_reset_handler(), there is possibility not
+	returning pending packets in the pend_list if there are multiple
+	pending packets.
+	Fix: Made the change in the driver so that it will return all packets
+	in the pend_list.
+
+2.	Added change request.
+	As found in the following URL, rmb() only didn't help the
+	problem. I had to increase the loop counter to 0xFFFFFF. (6 F's)
+	http://marc.theaimsgroup.com/?l=linux-scsi&m=110971060502497&w=2
+
+	I attached a patch for your reference, too.
+	Could you check and get this fix in your driver?
+
+	Best Regards,
+	Jun'ichi Nomura
+
 Release Date	: Fri Nov 11 12:27:22 EST 2005 - Seokmann Ju <sju@lsil.com>
 Current Version : 2.20.4.7 (scsi module), 2.20.2.6 (cmm module)
 Older Version	: 2.20.4.6 (scsi module), 2.20.2.6 (cmm module)
diff --git a/Documentation/serial/driver b/Documentation/serial/driver
index 42ef9970bc86..88ad615dd338 100644
--- a/Documentation/serial/driver
+++ b/Documentation/serial/driver
@@ -3,14 +3,11 @@
 			--------------------
 
 
-   $Id: driver,v 1.10 2002/07/22 15:27:30 rmk Exp $
-
-
 This document is meant as a brief overview of some aspects of the new serial
 driver.  It is not complete, any questions you have should be directed to
 <rmk@arm.linux.org.uk>
 
-The reference implementation is contained within serial_amba.c.
+The reference implementation is contained within amba_pl011.c.
 
 
 
@@ -31,6 +28,11 @@ The serial core provides a few helper functions.  This includes identifing
 the correct port structure (via uart_get_console) and decoding command line
 arguments (uart_parse_options).
 
+There is also a helper function (uart_write_console) which performs a
+character by character write, translating newlines to CRLF sequences.
+Driver writers are recommended to use this function rather than implementing
+their own version.
+
 
 Locking
 -------
@@ -86,6 +88,7 @@ hardware.
 		- TIOCM_DTR	DTR signal.
 		- TIOCM_OUT1	OUT1 signal.
 		- TIOCM_OUT2	OUT2 signal.
+		- TIOCM_LOOP	Set the port into loopback mode.
 	If the appropriate bit is set, the signal should be driven
 	active.  If the bit is clear, the signal should be driven
 	inactive.
@@ -141,6 +144,10 @@ hardware.
   enable_ms(port)
 	Enable the modem status interrupts.
 
+	This method may be called multiple times.  Modem status
+	interrupts should be disabled when the shutdown method is
+	called.
+
 	Locking: port->lock taken.
 	Interrupts: locally disabled.
 	This call must not sleep
@@ -160,6 +167,8 @@ hardware.
 	state.  Enable the port for reception.  It should not activate
 	RTS nor DTR; this will be done via a separate call to set_mctrl.
 
+	This method will only be called when the port is initially opened.
+
 	Locking: port_sem taken.
 	Interrupts: globally disabled.
 
@@ -169,6 +178,11 @@ hardware.
 	RTS nor DTR; this will have already been done via a separate
 	call to set_mctrl.
 
+	Drivers must not access port->info once this call has completed.
+
+	This method will only be called when there are no more users of
+	this port.
+
 	Locking: port_sem taken.
 	Interrupts: caller dependent.
 
@@ -200,12 +214,13 @@ hardware.
 	The interaction of the iflag bits is as follows (parity error
 	given as an example):
 	Parity error	INPCK	IGNPAR
-	None		n/a	n/a	character received
-	Yes		n/a	0	character discarded
-	Yes		0	1	character received, marked as
+	n/a		0	n/a	character received, marked as
+					TTY_NORMAL
+	None		1	n/a	character received, marked as
 					TTY_NORMAL
-	Yes		1	1	character received, marked as
+	Yes		1	0	character received, marked as
 					TTY_PARITY
+	Yes		1	1	character discarded
 
 	Other flags may be used (eg, xon/xoff characters) if your
 	hardware supports hardware "soft" flow control.
diff --git a/Documentation/sound/alsa/Audiophile-Usb.txt b/Documentation/sound/alsa/Audiophile-Usb.txt
index 4692c8e77dc1..b535c2a198f8 100644
--- a/Documentation/sound/alsa/Audiophile-Usb.txt
+++ b/Documentation/sound/alsa/Audiophile-Usb.txt
@@ -1,4 +1,4 @@
-	Guide to using M-Audio Audiophile USB with ALSA and Jack	v1.2
+	Guide to using M-Audio Audiophile USB with ALSA and Jack	v1.3
 	========================================================
 
 	    Thibault Le Meur <Thibault.LeMeur@supelec.fr>
@@ -22,16 +22,16 @@ The device has 4 audio interfaces, and 2 MIDI ports:
  * Midi In (Mi)
  * Midi Out (Mo)
 
-The internal DAC/ADC has the following caracteristics:
+The internal DAC/ADC has the following characteristics:
 * sample depth of 16 or 24 bits
 * sample rate from 8kHz to 96kHz
-* Two ports can't use different sample depths at the same time.Moreover, the 
+* Two ports can't use different sample depths at the same time. Moreover, the 
 Audiophile USB documentation gives the following Warning: "Please exit any 
 audio application running before switching between bit depths"
 
 Due to the USB 1.1 bandwidth limitation, a limited number of interfaces can be 
 activated at the same time depending on the audio mode selected:
- * 16-bit/48kHz ==> 4 channels in/ 4 channels out
+ * 16-bit/48kHz ==> 4 channels in/4 channels out
    - Ai+Ao+Di+Do
  * 24-bit/48kHz ==> 4 channels in/2 channels out, 
                     or 2 channels in/4 channels out
@@ -41,8 +41,8 @@ activated at the same time depending on the audio mode selected:
 
 Important facts about the Digital interface:
 --------------------------------------------
- * The Do port additionnaly supports surround-encoded AC-3 and DTS passthrough, 
-though I haven't tested it under linux
+ * The Do port additionally supports surround-encoded AC-3 and DTS passthrough, 
+though I haven't tested it under Linux
    - Note that in this setup only the Do interface can be enabled
  * Apart from recording an audio digital stream, enabling the Di port is a way 
 to synchronize the device to an external sample clock
@@ -60,24 +60,23 @@ synchronization error (for instance sound played at an odd sample rate)
 The Audiophile USB MIDI ports will be automatically supported once the 
 following modules have been loaded:
  * snd-usb-audio
- * snd-seq
  * snd-seq-midi
 
-No additionnal setting is required.
+No additional setting is required.
 
 2.2 - Audio ports
 -----------------
 
 Audio functions of the Audiophile USB device are handled by the snd-usb-audio 
 module. This module can work in a default mode (without any device-specific 
-parameter), or in an advanced mode with the device-specific parameter called 
+parameter), or in an "advanced" mode with the device-specific parameter called 
 "device_setup".
 
 2.2.1 - Default Alsa driver mode
 
-The default behaviour of the snd-usb-audio driver is to parse the device 
+The default behavior of the snd-usb-audio driver is to parse the device 
 capabilities at startup and enable all functions inside the device (including 
-all ports at any sample rates and any sample depths supported). This approach 
+all ports at any supported sample rates and sample depths). This approach 
 has the advantage to let the driver easily switch from sample rates/depths 
 automatically according to the need of the application claiming the device.
 
@@ -114,9 +113,9 @@ gain).
 For people having this problem, the snd-usb-audio module has a new module 
 parameter called "device_setup".
 
-2.2.2.1 - Initializing the working mode of the Audiohile USB
+2.2.2.1 - Initializing the working mode of the Audiophile USB
 
-As far as the Audiohile USB device is concerned, this value let the user 
+As far as the Audiophile USB device is concerned, this value let the user 
 specify:
  * the sample depth
  * the sample rate
@@ -174,20 +173,20 @@ The parameter can be given:
 
 IMPORTANT NOTE WHEN SWITCHING CONFIGURATION:
 -------------------------------------------
- * You may need to _first_ intialize the module with the correct device_setup 
+ * You may need to _first_ initialize the module with the correct device_setup 
    parameter and _only_after_ turn on the Audiophile USB device
  * This is especially true when switching the sample depth:
-   - first trun off the device
-   - de-register the snd-usb-audio module
-   - change the device_setup parameter (by either manually reprobing the module 
-     or changing modprobe.conf)
+   - first turn off the device
+   - de-register the snd-usb-audio module (modprobe -r)
+   - change the device_setup parameter by changing the device_setup
+     option in /etc/modprobe.conf 
    - turn on the device
 
 2.2.2.3 - Audiophile USB's device_setup structure
 
 If you want to understand the device_setup magic numbers for the Audiophile 
 USB, you need some very basic understanding of binary computation. However, 
-this is not required to use the parameter and you may skip thi section.
+this is not required to use the parameter and you may skip this section.
 
 The device_setup is one byte long and its structure is the following:
 
@@ -231,11 +230,11 @@ Caution:
 
 2.2.3 -  USB implementation details for this device
 
-You may safely skip this section if you're not interrested in driver 
+You may safely skip this section if you're not interested in driver 
 development.
 
-This section describes some internals aspect of the device and summarize the 
-data I got by usb-snooping the windows and linux drivers.
+This section describes some internal aspects of the device and summarize the 
+data I got by usb-snooping the windows and Linux drivers.
 
 The M-Audio Audiophile USB has 7 USB Interfaces:
 a "USB interface":
@@ -277,9 +276,9 @@ Here is a short description of the AltSettings capabilities:
   - 16-bit depth, 8-48kHz sample mode
   - Synch playback (Do), audio format type III IEC1937_AC-3
 
-In order to ensure a correct intialization of the device, the driver 
+In order to ensure a correct initialization of the device, the driver 
 _must_know_ how the device will be used:
- * if DTS is choosen, only Interface 2 with AltSet nb.6 must be
+ * if DTS is chosen, only Interface 2 with AltSet nb.6 must be
    registered
  * if 96KHz only AltSets nb.1 of each interface must be selected
  * if samples are using 24bits/48KHz then AltSet 2 must me used if
@@ -290,7 +289,7 @@ _must_know_ how the device will be used:
    is not connected
 
 When device_setup is given as a parameter to the snd-usb-audio module, the 
-parse_audio_enpoint function uses a quirk called 
+parse_audio_endpoints function uses a quirk called 
 "audiophile_skip_setting_quirk" in order to prevent AltSettings not 
 corresponding to device_setup from being registered in the driver.
 
@@ -317,9 +316,8 @@ However you may see the following warning message:
 using the "default" ALSA device. This is less efficient than it could be. 
 Consider using a hardware device instead rather than using the plug layer."
 
-
 3.2 - Patching alsa to use direct pcm device
--------------------------------------------
+--------------------------------------------
 A patch for Jack by Andreas Steinmetz adds support for Big Endian devices. 
 However it has not been included in the CVS tree.
 
@@ -331,3 +329,32 @@ After having applied the patch you can run jackd with the following command
 line:
   % jackd -R -dalsa -Phw:1,0 -r48000 -p128 -n2 -D -Chw:1,1
 
+3.2 - Getting 2 input and/or output interfaces in Jack
+------------------------------------------------------
+
+As you can see, starting the Jack server this way will only enable 1 stereo
+input (Di or Ai) and 1 stereo output (Ao or Do).
+
+This is due to the following restrictions:
+* Jack can only open one capture device and one playback device at a time
+* The Audiophile USB is seen as 2 (or three) Alsa devices: hw:1,0, hw:1,1
+  (and optionally hw:1,2)
+If you want to get Ai+Di and/or Ao+Do support with Jack, you would need to
+combine the Alsa devices into one logical "complex" device.
+
+If you want to give it a try, I recommend reading the information from
+this page: http://www.sound-man.co.uk/linuxaudio/ice1712multi.html
+It is related to another device (ice1712) but can be adapted to suit
+the Audiophile USB.
+
+Enabling multiple Audiophile USB interfaces for Jackd will certainly require:
+* patching Jack with the previously mentioned "Big Endian" patch
+* patching Jackd with the MMAP_COMPLEX patch (see the ice1712 page)
+* patching the alsa-lib/src/pcm/pcm_multi.c file (see the ice1712 page)
+* define a multi device (combination of hw:1,0 and hw:1,1) in your .asoundrc
+  file 
+* start jackd with this device
+
+I had no success in testing this for now, but this may be due to my OS
+configuration. If you have any success with this kind of setup, please
+drop me an email.
diff --git a/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl b/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl
index 68eeebc17ff4..1faf76383bab 100644
--- a/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl
+++ b/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl
@@ -1172,7 +1172,7 @@
   }        
 
   /* PCI IDs */
-  static struct pci_device_id snd_mychip_ids[] = {
+  static struct pci_device_id snd_mychip_ids[] __devinitdata = {
           { PCI_VENDOR_ID_FOO, PCI_DEVICE_ID_BAR,
             PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },
           ....
@@ -1565,7 +1565,7 @@
         <informalexample>
           <programlisting>
 <![CDATA[
-  static struct pci_device_id snd_mychip_ids[] = {
+  static struct pci_device_id snd_mychip_ids[] __devinitdata = {
           { PCI_VENDOR_ID_FOO, PCI_DEVICE_ID_BAR,
             PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },
           ....
diff --git a/Documentation/spi/pxa2xx b/Documentation/spi/pxa2xx
new file mode 100644
index 000000000000..9c45f3df2e18
--- /dev/null
+++ b/Documentation/spi/pxa2xx
@@ -0,0 +1,234 @@
+PXA2xx SPI on SSP driver HOWTO
+===================================================
+This a mini howto on the pxa2xx_spi driver.  The driver turns a PXA2xx
+synchronous serial port into a SPI master controller
+(see Documentation/spi/spi_summary). The driver has the following features
+
+- Support for any PXA2xx SSP
+- SSP PIO and SSP DMA data transfers.
+- External and Internal (SSPFRM) chip selects.
+- Per slave device (chip) configuration.
+- Full suspend, freeze, resume support.
+
+The driver is built around a "spi_message" fifo serviced by workqueue and a
+tasklet. The workqueue, "pump_messages", drives message fifo and the tasklet
+(pump_transfer) is responsible for queuing SPI transactions and setting up and
+launching the dma/interrupt driven transfers.
+
+Declaring PXA2xx Master Controllers
+-----------------------------------
+Typically a SPI master is defined in the arch/.../mach-*/board-*.c as a
+"platform device".  The master configuration is passed to the driver via a table
+found in include/asm-arm/arch-pxa/pxa2xx_spi.h:
+
+struct pxa2xx_spi_master {
+	enum pxa_ssp_type ssp_type;
+	u32 clock_enable;
+	u16 num_chipselect;
+	u8 enable_dma;
+};
+
+The "pxa2xx_spi_master.ssp_type" field must have a value between 1 and 3 and
+informs the driver which features a particular SSP supports.
+
+The "pxa2xx_spi_master.clock_enable" field is used to enable/disable the
+corresponding SSP peripheral block in the "Clock Enable Register (CKEN"). See
+the "PXA2xx Developer Manual" section "Clocks and Power Management".
+
+The "pxa2xx_spi_master.num_chipselect" field is used to determine the number of
+slave device (chips) attached to this SPI master.
+
+The "pxa2xx_spi_master.enable_dma" field informs the driver that SSP DMA should
+be used.  This caused the driver to acquire two DMA channels: rx_channel and
+tx_channel.  The rx_channel has a higher DMA service priority the tx_channel.
+See the "PXA2xx Developer Manual" section "DMA Controller".
+
+NSSP MASTER SAMPLE
+------------------
+Below is a sample configuration using the PXA255 NSSP.
+
+static struct resource pxa_spi_nssp_resources[] = {
+	[0] = {
+		.start	= __PREG(SSCR0_P(2)), /* Start address of NSSP */
+		.end	= __PREG(SSCR0_P(2)) + 0x2c, /* Range of registers */
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_NSSP, /* NSSP IRQ */
+		.end	= IRQ_NSSP,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct pxa2xx_spi_master pxa_nssp_master_info = {
+	.ssp_type = PXA25x_NSSP, /* Type of SSP */
+	.clock_enable = CKEN9_NSSP, /* NSSP Peripheral clock */
+	.num_chipselect = 1, /* Matches the number of chips attached to NSSP */
+	.enable_dma = 1, /* Enables NSSP DMA */
+};
+
+static struct platform_device pxa_spi_nssp = {
+	.name = "pxa2xx-spi", /* MUST BE THIS VALUE, so device match driver */
+	.id = 2, /* Bus number, MUST MATCH SSP number 1..n */
+	.resource = pxa_spi_nssp_resources,
+	.num_resources = ARRAY_SIZE(pxa_spi_nssp_resources),
+	.dev = {
+		.platform_data = &pxa_nssp_master_info, /* Passed to driver */
+	},
+};
+
+static struct platform_device *devices[] __initdata = {
+	&pxa_spi_nssp,
+};
+
+static void __init board_init(void)
+{
+	(void)platform_add_device(devices, ARRAY_SIZE(devices));
+}
+
+Declaring Slave Devices
+-----------------------
+Typically each SPI slave (chip) is defined in the arch/.../mach-*/board-*.c
+using the "spi_board_info" structure found in "linux/spi/spi.h". See
+"Documentation/spi/spi_summary" for additional information.
+
+Each slave device attached to the PXA must provide slave specific configuration
+information via the structure "pxa2xx_spi_chip" found in
+"include/asm-arm/arch-pxa/pxa2xx_spi.h".  The pxa2xx_spi master controller driver
+will uses the configuration whenever the driver communicates with the slave
+device.
+
+struct pxa2xx_spi_chip {
+	u8 tx_threshold;
+	u8 rx_threshold;
+	u8 dma_burst_size;
+	u32 timeout_microsecs;
+	u8 enable_loopback;
+	void (*cs_control)(u32 command);
+};
+
+The "pxa2xx_spi_chip.tx_threshold" and "pxa2xx_spi_chip.rx_threshold" fields are
+used to configure the SSP hardware fifo.  These fields are critical to the
+performance of pxa2xx_spi driver and misconfiguration will result in rx
+fifo overruns (especially in PIO mode transfers). Good default values are
+
+	.tx_threshold = 12,
+	.rx_threshold = 4,
+
+The "pxa2xx_spi_chip.dma_burst_size" field is used to configure PXA2xx DMA
+engine and is related the "spi_device.bits_per_word" field.  Read and understand
+the PXA2xx "Developer Manual" sections on the DMA controller and SSP Controllers
+to determine the correct value. An SSP configured for byte-wide transfers would
+use a value of 8.
+
+The "pxa2xx_spi_chip.timeout_microsecs" fields is used to efficiently handle
+trailing bytes in the SSP receiver fifo.  The correct value for this field is
+dependent on the SPI bus speed ("spi_board_info.max_speed_hz") and the specific
+slave device.  Please note the the PXA2xx SSP 1 does not support trailing byte
+timeouts and must busy-wait any trailing bytes.
+
+The "pxa2xx_spi_chip.enable_loopback" field is used to place the SSP porting
+into internal loopback mode.  In this mode the SSP controller internally
+connects the SSPTX pin the the SSPRX pin.  This is useful for initial setup
+testing.
+
+The "pxa2xx_spi_chip.cs_control" field is used to point to a board specific
+function for asserting/deasserting a slave device chip select.  If the field is
+NULL, the pxa2xx_spi master controller driver assumes that the SSP port is
+configured to use SSPFRM instead.
+
+NSSP SALVE SAMPLE
+-----------------
+The pxa2xx_spi_chip structure is passed to the pxa2xx_spi driver in the
+"spi_board_info.controller_data" field. Below is a sample configuration using
+the PXA255 NSSP.
+
+/* Chip Select control for the CS8415A SPI slave device */
+static void cs8415a_cs_control(u32 command)
+{
+	if (command & PXA2XX_CS_ASSERT)
+		GPCR(2) = GPIO_bit(2);
+	else
+		GPSR(2) = GPIO_bit(2);
+}
+
+/* Chip Select control for the CS8405A SPI slave device */
+static void cs8405a_cs_control(u32 command)
+{
+	if (command & PXA2XX_CS_ASSERT)
+		GPCR(3) = GPIO_bit(3);
+	else
+		GPSR(3) = GPIO_bit(3);
+}
+
+static struct pxa2xx_spi_chip cs8415a_chip_info = {
+	.tx_threshold = 12, /* SSP hardward FIFO threshold */
+	.rx_threshold = 4, /* SSP hardward FIFO threshold */
+	.dma_burst_size = 8, /* Byte wide transfers used so 8 byte bursts */
+	.timeout_microsecs = 64, /* Wait at least 64usec to handle trailing */
+	.cs_control = cs8415a_cs_control, /* Use external chip select */
+};
+
+static struct pxa2xx_spi_chip cs8405a_chip_info = {
+	.tx_threshold = 12, /* SSP hardward FIFO threshold */
+	.rx_threshold = 4, /* SSP hardward FIFO threshold */
+	.dma_burst_size = 8, /* Byte wide transfers used so 8 byte bursts */
+	.timeout_microsecs = 64, /* Wait at least 64usec to handle trailing */
+	.cs_control = cs8405a_cs_control, /* Use external chip select */
+};
+
+static struct spi_board_info streetracer_spi_board_info[] __initdata = {
+	{
+		.modalias = "cs8415a", /* Name of spi_driver for this device */
+		.max_speed_hz = 3686400, /* Run SSP as fast a possbile */
+		.bus_num = 2, /* Framework bus number */
+		.chip_select = 0, /* Framework chip select */
+		.platform_data = NULL; /* No spi_driver specific config */
+		.controller_data = &cs8415a_chip_info, /* Master chip config */
+		.irq = STREETRACER_APCI_IRQ, /* Slave device interrupt */
+	},
+	{
+		.modalias = "cs8405a", /* Name of spi_driver for this device */
+		.max_speed_hz = 3686400, /* Run SSP as fast a possbile */
+		.bus_num = 2, /* Framework bus number */
+		.chip_select = 1, /* Framework chip select */
+		.controller_data = &cs8405a_chip_info, /* Master chip config */
+		.irq = STREETRACER_APCI_IRQ, /* Slave device interrupt */
+	},
+};
+
+static void __init streetracer_init(void)
+{
+	spi_register_board_info(streetracer_spi_board_info,
+				ARRAY_SIZE(streetracer_spi_board_info));
+}
+
+
+DMA and PIO I/O Support
+-----------------------
+The pxa2xx_spi driver support both DMA and interrupt driven PIO message
+transfers.  The driver defaults to PIO mode and DMA transfers must enabled by
+setting the "enable_dma" flag in the "pxa2xx_spi_master" structure and and
+ensuring that the "pxa2xx_spi_chip.dma_burst_size" field is non-zero.  The DMA
+mode support both coherent and stream based DMA mappings.
+
+The following logic is used to determine the type of I/O to be used on
+a per "spi_transfer" basis:
+
+if !enable_dma or dma_burst_size == 0 then
+	always use PIO transfers
+
+if spi_message.is_dma_mapped and rx_dma_buf != 0 and tx_dma_buf != 0 then
+	use coherent DMA mode
+
+if rx_buf and tx_buf are aligned on 8 byte boundary then
+	use streaming DMA mode
+
+otherwise
+	use PIO transfer
+
+THANKS TO
+---------
+
+David Brownell and others for mentoring the development of this driver.
+
diff --git a/Documentation/spi/spi-summary b/Documentation/spi/spi-summary
index a5ffba33a351..068732d32276 100644
--- a/Documentation/spi/spi-summary
+++ b/Documentation/spi/spi-summary
@@ -414,7 +414,33 @@ to get the driver-private data allocated for that device.
 The driver will initialize the fields of that spi_master, including the
 bus number (maybe the same as the platform device ID) and three methods
 used to interact with the SPI core and SPI protocol drivers.  It will
-also initialize its own internal state.
+also initialize its own internal state.  (See below about bus numbering
+and those methods.)
+
+After you initialize the spi_master, then use spi_register_master() to
+publish it to the rest of the system.  At that time, device nodes for
+the controller and any predeclared spi devices will be made available,
+and the driver model core will take care of binding them to drivers.
+
+If you need to remove your SPI controller driver, spi_unregister_master()
+will reverse the effect of spi_register_master().
+
+
+BUS NUMBERING
+
+Bus numbering is important, since that's how Linux identifies a given
+SPI bus (shared SCK, MOSI, MISO).  Valid bus numbers start at zero.  On
+SOC systems, the bus numbers should match the numbers defined by the chip
+manufacturer.  For example, hardware controller SPI2 would be bus number 2,
+and spi_board_info for devices connected to it would use that number.
+
+If you don't have such hardware-assigned bus number, and for some reason
+you can't just assign them, then provide a negative bus number.  That will
+then be replaced by a dynamically assigned number. You'd then need to treat
+this as a non-static configuration (see above).
+
+
+SPI MASTER METHODS
 
     master->setup(struct spi_device *spi)
 	This sets up the device clock rate, SPI mode, and word sizes.
@@ -431,6 +457,9 @@ also initialize its own internal state.
 	state it dynamically associates with that device.  If you do that,
 	be sure to provide the cleanup() method to free that state.
 
+
+SPI MESSAGE QUEUE
+
 The bulk of the driver will be managing the I/O queue fed by transfer().
 
 That queue could be purely conceptual.  For example, a driver used only
@@ -440,6 +469,9 @@ But the queue will probably be very real, using message->queue, PIO,
 often DMA (especially if the root filesystem is in SPI flash), and
 execution contexts like IRQ handlers, tasklets, or workqueues (such
 as keventd).  Your driver can be as fancy, or as simple, as you need.
+Such a transfer() method would normally just add the message to a
+queue, and then start some asynchronous transfer engine (unless it's
+already running).
 
 
 THANKS TO
diff --git a/Documentation/vm/hugetlbpage.txt b/Documentation/vm/hugetlbpage.txt
index 2803f63c1a27..687104bfd09a 100644
--- a/Documentation/vm/hugetlbpage.txt
+++ b/Documentation/vm/hugetlbpage.txt
@@ -32,7 +32,16 @@ The output of "cat /proc/meminfo" will have lines like:
 .....
 HugePages_Total: xxx
 HugePages_Free:  yyy
-Hugepagesize:    zzz KB
+HugePages_Rsvd:  www
+Hugepagesize:    zzz kB
+
+where:
+HugePages_Total is the size of the pool of hugepages.
+HugePages_Free is the number of hugepages in the pool that are not yet
+allocated.
+HugePages_Rsvd is short for "reserved," and is the number of hugepages
+for which a commitment to allocate from the pool has been made, but no
+allocation has yet been made. It's vaguely analogous to overcommit.
 
 /proc/filesystems should also show a filesystem of type "hugetlbfs" configured
 in the kernel.
diff --git a/Documentation/watchdog/watchdog-api.txt b/Documentation/watchdog/watchdog-api.txt
index c5beb548cfc4..21ed51173662 100644
--- a/Documentation/watchdog/watchdog-api.txt
+++ b/Documentation/watchdog/watchdog-api.txt
@@ -36,6 +36,9 @@ timeout or margin.  The simplest way to ping the watchdog is to write
 some data to the device.  So a very simple watchdog daemon would look
 like this:
 
+#include <stdlib.h>
+#include <fcntl.h>
+
 int main(int argc, const char *argv[]) {
 	int fd=open("/dev/watchdog",O_WRONLY);
 	if (fd==-1) {
diff --git a/MAINTAINERS b/MAINTAINERS
index db647bf8830b..07e7fd8f50cf 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -40,11 +40,20 @@ trivial patch so apply some common sense.
 	PLEASE document known bugs. If it doesn't work for everything
 	or does something very odd once a month document it.
 
+	PLEASE remember that submissions must be made under the terms
+	of the OSDL certificate of contribution
+	(http://www.osdl.org/newsroom/press_releases/2004/2004_05_24_dco.html)
+	and should include a Signed-off-by: line.
+
 6.	Make sure you have the right to send any changes you make. If you
 	do changes at work you may find your employer owns the patch
 	not you.
 
-7.	Happy hacking.
+7.	When sending security related changes or reports to a maintainer
+	please Cc: security@kernel.org, especially if the maintainer
+	does not respond.
+
+8.	Happy hacking.
 
  		-----------------------------------
 
@@ -411,6 +420,7 @@ AX.25 NETWORK LAYER
 P:	Ralf Baechle
 M:	ralf@linux-mips.org
 L:	linux-hams@vger.kernel.org
+W:	http://www.linux-ax25.org/
 S:	Maintained
 
 BAYCOM/HDLCDRV DRIVERS FOR AX.25
@@ -420,6 +430,14 @@ L:	linux-hams@vger.kernel.org
 W:	http://www.baycom.org/~tom/ham/ham.html
 S:	Maintained
 
+BCM43XX WIRELESS DRIVER
+P:	Michael Buesch
+M:	mb@bu3sch.de
+P:	Stefano Brivio
+M:	st3@riseup.net
+W:	http://bcm43xx.berlios.de/
+S:	Maintained
+
 BEFS FILE SYSTEM
 P:	Sergey S. Kostyliov
 M:	rathamahata@php4.ru
@@ -547,7 +565,19 @@ BROADBAND PROCESSOR ARCHITECTURE
 P:	Arnd Bergmann
 M:	arnd@arndb.de
 L:	linuxppc-dev@ozlabs.org
-W:	http://linuxppc64.org
+W:	http://www.penguinppc.org/ppc64/
+S:	Supported
+
+BROADCOM BNX2 GIGABIT ETHERNET DRIVER
+P:	Michael Chan
+M:	mchan@broadcom.com
+L:	netdev@vger.kernel.org
+S:	Supported
+
+BROADCOM TG3 GIGABIT ETHERNET DRIVER
+P:	Michael Chan
+M:	mchan@broadcom.com
+L:	netdev@vger.kernel.org
 S:	Supported
 
 BTTV VIDEO4LINUX DRIVER
@@ -960,7 +990,7 @@ S:	Maintained
 EXT3 FILE SYSTEM
 P:	Stephen Tweedie, Andrew Morton
 M:	sct@redhat.com, akpm@osdl.org, adilger@clusterfs.com
-L:	ext3-users@redhat.com
+L:	ext2-devel@lists.sourceforge.net
 S:	Maintained
 
 F71805F HARDWARE MONITORING DRIVER
@@ -1463,6 +1493,13 @@ M:	support@pathscale.com
 L:	openib-general@openib.org
 S:	Supported
 
+IPMI SUBSYSTEM
+P:	Corey Minyard
+M:	minyard@acm.org
+L:	openipmi-developer@lists.sourceforge.net
+W:	http://openipmi.sourceforge.net/
+S:	Supported
+
 IPX NETWORK LAYER
 P:	Arnaldo Carvalho de Melo
 M:	acme@conectiva.com.br
@@ -1470,10 +1507,11 @@ L:	netdev@vger.kernel.org
 S:	Maintained
 
 IRDA SUBSYSTEM
-P:	Jean Tourrilhes
+P:	Samuel Ortiz
+M:	samuel@sortiz.org
 L:	irda-users@lists.sourceforge.net (subscribers-only)
 W:	http://irda.sourceforge.net/
-S:	Odd Fixes
+S:	Maintained
 
 ISAPNP
 P:	Jaroslav Kysela
@@ -1519,12 +1557,28 @@ W:	http://jfs.sourceforge.net/
 T:	git kernel.org:/pub/scm/linux/kernel/git/shaggy/jfs-2.6.git
 S:	Supported
 
+JOURNALLING LAYER FOR BLOCK DEVICS (JBD)
+P:	Stephen Tweedie, Andrew Morton
+M:	sct@redhat.com, akpm@osdl.org
+L:	ext2-devel@lists.sourceforge.net
+S:	Maintained
+
 KCONFIG
 P:	Roman Zippel
 M:	zippel@linux-m68k.org
 L:	kbuild-devel@lists.sourceforge.net
 S:	Maintained
 
+KDUMP
+P:	Vivek Goyal
+M:	vgoyal@in.ibm.com
+P:	Haren Myneni
+M:	hbabu@us.ibm.com
+L:	fastboot@lists.osdl.org
+L:	linux-kernel@vger.kernel.org
+W:	http://lse.sourceforge.net/kdump/
+S:	Maintained
+
 KERNEL AUTOMOUNTER (AUTOFS)
 P:	H. Peter Anvin
 M:	hpa@zytor.com
@@ -1592,6 +1646,11 @@ M:	James.Bottomley@HansenPartnership.com
 L:	linux-scsi@vger.kernel.org
 S:	Maintained
 
+LED SUBSYSTEM
+P:	Richard Purdie
+M:	rpurdie@rpsys.net
+S:	Maintained
+
 LEGO USB Tower driver
 P:	Juergen Stuber
 M:	starblue@users.sourceforge.net
@@ -1651,7 +1710,7 @@ S:	Maintained
 
 LINUX FOR POWERPC EMBEDDED PPC8XX
 P:	Marcelo Tosatti
-M:	marcelo.tosatti@cyclades.com
+M:	marcelo@kvack.org
 W:	http://www.penguinppc.org/
 L:	linuxppc-embedded@ozlabs.org
 S:	Maintained
@@ -1675,7 +1734,7 @@ M:	paulus@au.ibm.com
 P:	Anton Blanchard
 M:	anton@samba.org
 M:	anton@au.ibm.com
-W:	http://linuxppc64.org
+W:	http://www.penguinppc.org/ppc64/
 L:	linuxppc-dev@ozlabs.org
 S:	Supported
 
@@ -1836,6 +1895,11 @@ L:	linux-kernel@vger.kernel.org
 W:	http://www.atnf.csiro.au/~rgooch/linux/kernel-patches.html
 S:	Maintained
 
+MULTIMEDIA CARD SUBSYSTEM
+P:	Russell King
+M:	rmk+mmc@arm.linux.org.uk
+S:	Maintained
+
 MULTISOUND SOUND DRIVER
 P:	Andrew Veliath
 M:	andrewtv@usa.net
@@ -1858,6 +1922,12 @@ M:	James.Bottomley@HansenPartnership.com
 L:	linux-scsi@vger.kernel.org
 S:	Maintained
 
+NETEM NETWORK EMULATOR
+P:	Stephen Hemminger
+M:	shemminger@osdl.org
+L:	netem@osdl.org
+S:	Maintained
+
 NETFILTER/IPTABLES/IPCHAINS
 P:	Rusty Russell
 P:	Marc Boucher
@@ -1875,6 +1945,7 @@ NETROM NETWORK LAYER
 P:	Ralf Baechle
 M:	ralf@linux-mips.org
 L:	linux-hams@vger.kernel.org
+W:	http://www.linux-ax25.org/
 S:	Maintained
 
 NETWORK BLOCK DEVICE
@@ -2062,8 +2133,12 @@ P:	Matthew Wilcox
 M:	matthew@wil.cx
 P:	Grant Grundler
 M:	grundler@parisc-linux.org
+P:	Kyle McMartin
+M:	kyle@parisc-linux.org
 L:	parisc-linux@parisc-linux.org
 W:	http://www.parisc-linux.org/
+T:	git kernel.org:/pub/scm/linux/kernel/git/kyle/parisc-2.6.git
+T:	cvs cvs.parisc-linux.org:/var/cvs/linux-2.6
 S:	Maintained
 
 PCI ERROR RECOVERY
@@ -2266,6 +2341,7 @@ ROSE NETWORK LAYER
 P:	Ralf Baechle
 M:	ralf@linux-mips.org
 L:	linux-hams@vger.kernel.org
+W:	http://www.linux-ax25.org/
 S:	Maintained
 
 RISCOM8 DRIVER
@@ -2496,6 +2572,12 @@ M:	perex@suse.cz
 L:	alsa-devel@alsa-project.org
 S:	Maintained
 
+SPI SUBSYSTEM
+P:	David Brownell
+M:	dbrownell@users.sourceforge.net
+L:	spi-devel-general@lists.sourceforge.net
+S:	Maintained
+
 TPM DEVICE DRIVER
 P:	Kylene Hall
 M:	kjhall@us.ibm.com
diff --git a/Makefile b/Makefile
index fc8e08c419f0..a3a7baad8555 100644
--- a/Makefile
+++ b/Makefile
@@ -1,8 +1,8 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 17
-EXTRAVERSION =-rc1
-NAME=Sliding Snow Leopard
+EXTRAVERSION =-rc6
+NAME=Crazed Snow-Weasel
 
 # *DOCUMENTATION*
 # To see a list of typical targets execute "make help"
@@ -344,16 +344,14 @@ scripts_basic:
 scripts/basic/%: scripts_basic ;
 
 PHONY += outputmakefile
-# outputmakefile generate a Makefile to be placed in output directory, if
-# using a seperate output directory. This allows convinient use
-# of make in output directory
+# outputmakefile generates a Makefile in the output directory, if using a
+# separate output directory. This allows convenient use of make in the
+# output directory.
 outputmakefile:
-	$(Q)if test ! $(srctree) -ef $(objtree); then \
-	$(CONFIG_SHELL) $(srctree)/scripts/mkmakefile              \
-	    $(srctree) $(objtree) $(VERSION) $(PATCHLEVEL)         \
-	    > $(objtree)/Makefile;                                 \
-	    echo '  GEN    $(objtree)/Makefile';                   \
-	fi
+ifneq ($(KBUILD_SRC),)
+	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/mkmakefile \
+	    $(srctree) $(objtree) $(VERSION) $(PATCHLEVEL)
+endif
 
 # To make sure we do not include .config for any of the *config targets
 # catch them early, and hand them over to scripts/kconfig/Makefile
@@ -796,8 +794,8 @@ prepare2: prepare3 outputmakefile
 prepare1: prepare2 include/linux/version.h include/asm \
                    include/config/MARKER
 ifneq ($(KBUILD_MODULES),)
-	$(Q)rm -rf $(MODVERDIR)
 	$(Q)mkdir -p $(MODVERDIR)
+	$(Q)rm -f $(MODVERDIR)/*
 endif
 
 archprepare: prepare1 scripts_basic
@@ -1086,8 +1084,8 @@ else # KBUILD_EXTMOD
 KBUILD_MODULES := 1
 PHONY += crmodverdir
 crmodverdir:
-	$(Q)rm -rf $(MODVERDIR)
 	$(Q)mkdir -p $(MODVERDIR)
+	$(Q)rm -f $(MODVERDIR)/*
 
 PHONY += $(objtree)/Module.symvers
 $(objtree)/Module.symvers:
diff --git a/README b/README
index 05e055530bbb..3e264723b863 100644
--- a/README
+++ b/README
@@ -165,10 +165,31 @@ CONFIGURING the kernel:
 	"make xconfig"     X windows (Qt) based configuration tool.
 	"make gconfig"     X windows (Gtk) based configuration tool.
 	"make oldconfig"   Default all questions based on the contents of
-			   your existing ./.config file.
+			   your existing ./.config file and asking about
+			   new config symbols.
 	"make silentoldconfig"
 			   Like above, but avoids cluttering the screen
 			   with questions already answered.
+	"make defconfig"   Create a ./.config file by using the default
+			   symbol values from arch/$ARCH/defconfig.
+	"make allyesconfig"
+			   Create a ./.config file by setting symbol
+			   values to 'y' as much as possible.
+	"make allmodconfig"
+			   Create a ./.config file by setting symbol
+			   values to 'm' as much as possible.
+	"make allnoconfig" Create a ./.config file by setting symbol
+			   values to 'n' as much as possible.
+	"make randconfig"  Create a ./.config file by setting symbol
+			   values to random values.
+
+   The allyesconfig/allmodconfig/allnoconfig/randconfig variants can
+   also use the environment variable KCONFIG_ALLCONFIG to specify a
+   filename that contains config options that the user requires to be
+   set to a specific value.  If KCONFIG_ALLCONFIG=filename is not used,
+   "make *config" checks for a file named "all{yes/mod/no/random}.config"
+   for symbol values that are to be forced.  If this file is not found,
+   it checks for a file named "all.config" to contain forced values.
    
 	NOTES on "make config":
 	- having unnecessary drivers will make the kernel bigger, and can
diff --git a/arch/alpha/kernel/alpha_ksyms.c b/arch/alpha/kernel/alpha_ksyms.c
index c645c5e14786..2b245ad731ee 100644
--- a/arch/alpha/kernel/alpha_ksyms.c
+++ b/arch/alpha/kernel/alpha_ksyms.c
@@ -182,7 +182,6 @@ EXPORT_SYMBOL(smp_num_cpus);
 EXPORT_SYMBOL(smp_call_function);
 EXPORT_SYMBOL(smp_call_function_on_cpu);
 EXPORT_SYMBOL(_atomic_dec_and_lock);
-EXPORT_SYMBOL(cpu_present_mask);
 #endif /* CONFIG_SMP */
 
 /*
diff --git a/arch/alpha/kernel/process.c b/arch/alpha/kernel/process.c
index 9924fd07743a..c760a831fd1a 100644
--- a/arch/alpha/kernel/process.c
+++ b/arch/alpha/kernel/process.c
@@ -94,7 +94,7 @@ common_shutdown_1(void *generic_ptr)
 	if (cpuid != boot_cpuid) {
 		flags |= 0x00040000UL; /* "remain halted" */
 		*pflags = flags;
-		clear_bit(cpuid, &cpu_present_mask);
+		cpu_clear(cpuid, cpu_present_map);
 		halt();
 	}
 #endif
@@ -120,8 +120,8 @@ common_shutdown_1(void *generic_ptr)
 
 #ifdef CONFIG_SMP
 	/* Wait for the secondaries to halt. */
-	cpu_clear(boot_cpuid, cpu_possible_map);
-	while (cpus_weight(cpu_possible_map))
+	cpu_clear(boot_cpuid, cpu_present_map);
+	while (cpus_weight(cpu_present_map))
 		barrier();
 #endif
 
diff --git a/arch/alpha/kernel/smp.c b/arch/alpha/kernel/smp.c
index 185255416e85..4dc273e537fd 100644
--- a/arch/alpha/kernel/smp.c
+++ b/arch/alpha/kernel/smp.c
@@ -68,7 +68,6 @@ enum ipi_message_type {
 static int smp_secondary_alive __initdata = 0;
 
 /* Which cpus ids came online.  */
-cpumask_t cpu_present_mask;
 cpumask_t cpu_online_map;
 
 EXPORT_SYMBOL(cpu_online_map);
@@ -439,7 +438,7 @@ setup_smp(void)
 			if ((cpu->flags & 0x1cc) == 0x1cc) {
 				smp_num_probed++;
 				/* Assume here that "whami" == index */
-				cpu_set(i, cpu_present_mask);
+				cpu_set(i, cpu_present_map);
 				cpu->pal_revision = boot_cpu_palrev;
 			}
 
@@ -450,11 +449,10 @@ setup_smp(void)
 		}
 	} else {
 		smp_num_probed = 1;
-		cpu_set(boot_cpuid, cpu_present_mask);
 	}
 
-	printk(KERN_INFO "SMP: %d CPUs probed -- cpu_present_mask = %lx\n",
-	       smp_num_probed, cpu_possible_map.bits[0]);
+	printk(KERN_INFO "SMP: %d CPUs probed -- cpu_present_map = %lx\n",
+	       smp_num_probed, cpu_present_map.bits[0]);
 }
 
 /*
@@ -473,7 +471,7 @@ smp_prepare_cpus(unsigned int max_cpus)
 
 	/* Nothing to do on a UP box, or when told not to.  */
 	if (smp_num_probed == 1 || max_cpus == 0) {
-		cpu_present_mask = cpumask_of_cpu(boot_cpuid);
+		cpu_present_map = cpumask_of_cpu(boot_cpuid);
 		printk(KERN_INFO "SMP mode deactivated.\n");
 		return;
 	}
@@ -486,10 +484,6 @@ smp_prepare_cpus(unsigned int max_cpus)
 void __devinit
 smp_prepare_boot_cpu(void)
 {
-	/*
-	 * Mark the boot cpu (current cpu) as online
-	 */ 
-	cpu_set(smp_processor_id(), cpu_online_map);
 }
 
 int __devinit
diff --git a/arch/alpha/kernel/sys_titan.c b/arch/alpha/kernel/sys_titan.c
index 5f84417eeb7b..2551fb49ae09 100644
--- a/arch/alpha/kernel/sys_titan.c
+++ b/arch/alpha/kernel/sys_titan.c
@@ -66,7 +66,7 @@ titan_update_irq_hw(unsigned long mask)
 	register int bcpu = boot_cpuid;
 
 #ifdef CONFIG_SMP
-	cpumask_t cpm = cpu_present_mask;
+	cpumask_t cpm = cpu_present_map;
 	volatile unsigned long *dim0, *dim1, *dim2, *dim3;
 	unsigned long mask0, mask1, mask2, mask3, dummy;
 
diff --git a/arch/alpha/lib/strncpy.S b/arch/alpha/lib/strncpy.S
index 338551c7113c..bbdef1be5f95 100644
--- a/arch/alpha/lib/strncpy.S
+++ b/arch/alpha/lib/strncpy.S
@@ -43,8 +43,8 @@ strncpy:
 
 	.align	4
 $multiword:
-	subq	$24, 1, $2	# clear the final bits in the prev word
-	or	$2, $24, $2
+	subq	$27, 1, $2	# clear the final bits in the prev word
+	or	$2, $27, $2
 	zapnot	$1, $2, $1
 	subq	$18, 1, $18
 
@@ -70,8 +70,8 @@ $multiword:
 	bne	$18, 0b
 
 1:	ldq_u	$1, 0($16)	# clear the leading bits in the final word
-	subq	$27, 1, $2
-	or	$2, $27, $2
+	subq	$24, 1, $2
+	or	$2, $24, $2
 
 	zap	$1, $2, $1
 	stq_u	$1, 0($16)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 1dbf6ddb300d..08b7cc900cae 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -150,8 +150,6 @@ config ARCH_IOP3XX
 
 config ARCH_IXP4XX
 	bool "IXP4xx-based"
-	select DMABOUNCE
-	select PCI
 	help
 	  Support for Intel's IXP4XX (XScale) family of processors.
 
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 5d3acff8c596..d22f38b957db 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -101,7 +101,7 @@ config DEBUG_S3C2410_UART
 	help
 	  Choice for UART for kernel low-level using S3C2410 UARTS,
 	  should be between zero and two. The port must have been
-	  initalised by the boot-loader before use.
+	  initialised by the boot-loader before use.
 
 	  The uncompressor code port configuration is now handled
 	  by CONFIG_S3C2410_LOWLEVEL_UART_PORT.
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 95a96275f88a..6f8e84c1c1f2 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -66,7 +66,7 @@ tune-$(CONFIG_CPU_XSC3)		:=$(call cc-option,-mtune=xscale,-mtune=strongarm110) -
 tune-$(CONFIG_CPU_V6)		:=$(call cc-option,-mtune=arm1136j-s,-mtune=strongarm)
 
 ifeq ($(CONFIG_AEABI),y)
-CFLAGS_ABI	:=-mabi=aapcs -mno-thumb-interwork
+CFLAGS_ABI	:=-mabi=aapcs-linux -mno-thumb-interwork
 else
 CFLAGS_ABI	:=$(call cc-option,-mapcs-32,-mabi=apcs-gnu) $(call cc-option,-mno-thumb-interwork,)
 endif
diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c
index 0af3772efcb7..ace3fb5835d9 100644
--- a/arch/arm/boot/compressed/misc.c
+++ b/arch/arm/boot/compressed/misc.c
@@ -38,10 +38,10 @@ static void icedcc_putc(int ch)
 		if (--i < 0)
 			return;
 
-		asm("mrc p14, 0, %0, c0, c0, 0" : "=r" (status));
+		asm volatile ("mrc p14, 0, %0, c0, c0, 0" : "=r" (status));
 	} while (status & 2);
 
-	asm("mcr p15, 0, %0, c1, c0, 0" : : "r" (ch));
+	asm("mcr p14, 0, %0, c1, c0, 0" : : "r" (ch));
 }
 
 #define putc(ch)	icedcc_putc(ch)
diff --git a/arch/arm/common/scoop.c b/arch/arm/common/scoop.c
index 5e830f444c6c..314ebd3a1d71 100644
--- a/arch/arm/common/scoop.c
+++ b/arch/arm/common/scoop.c
@@ -18,6 +18,18 @@
 #include <asm/io.h>
 #include <asm/hardware/scoop.h>
 
+/* PCMCIA to Scoop linkage
+
+   There is no easy way to link multiple scoop devices into one
+   single entity for the pxa2xx_pcmcia device so this structure
+   is used which is setup by the platform code.
+
+   This file is never modular so this symbol is always
+   accessile to the board support files.
+*/
+struct scoop_pcmcia_config *platform_scoop_config;
+EXPORT_SYMBOL(platform_scoop_config);
+
 #define SCOOP_REG(d,adr) (*(volatile unsigned short*)(d +(adr)))
 
 struct  scoop_dev {
diff --git a/arch/arm/configs/collie_defconfig b/arch/arm/configs/collie_defconfig
index c9aa878e610a..074c47a4fb2e 100644
--- a/arch/arm/configs/collie_defconfig
+++ b/arch/arm/configs/collie_defconfig
@@ -1,21 +1,21 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc3
-# Sun Oct  9 16:55:14 2005
+# Linux kernel version: 2.6.17-rc1
+# Fri Apr 14 19:09:52 2006
 #
 CONFIG_ARM=y
 CONFIG_MMU=y
-CONFIG_UID16=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_VECTORS_BASE=0xffff0000
 
 #
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
@@ -23,45 +23,58 @@ CONFIG_INIT_ENV_ARG_LIMIT=32
 #
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
+# CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 # CONFIG_POSIX_MQUEUE is not set
-CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
+# CONFIG_RELAY is not set
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_UID16=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
-CONFIG_BASE_FULL=y
+CONFIG_ELF_CORE=y
+# CONFIG_BASE_FULL is not set
 CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+# CONFIG_EPOLL is not set
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_SLAB is not set
+CONFIG_DOUBLEFAULT=y
 # CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
+CONFIG_BASE_SMALL=1
+CONFIG_SLOB=y
+CONFIG_OBSOLETE_INTERMODULE=y
 
 #
 # Loadable module support
 #
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
+# CONFIG_MODULES is not set
+
+#
+# Block layer
+#
+# CONFIG_BLK_DEV_IO_TRACE is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
 
 #
 # System Type
@@ -70,11 +83,13 @@ CONFIG_KMOD=y
 # CONFIG_ARCH_CLPS711X is not set
 # CONFIG_ARCH_CO285 is not set
 # CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
 # CONFIG_ARCH_INTEGRATOR is not set
 # CONFIG_ARCH_IOP3XX is not set
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP23XX is not set
 # CONFIG_ARCH_L7200 is not set
 # CONFIG_ARCH_PXA is not set
 # CONFIG_ARCH_RPC is not set
@@ -84,9 +99,11 @@ CONFIG_ARCH_SA1100=y
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_OMAP is not set
 # CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_H720X is not set
 # CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_AT91RM9200 is not set
 
 #
 # SA11x0 Implementations
@@ -128,20 +145,32 @@ CONFIG_SHARP_SCOOP=y
 # Bus support
 #
 CONFIG_ISA=y
-CONFIG_ISA_DMA_API=y
 
 #
 # PCCARD (PCMCIA/CardBus) support
 #
-# CONFIG_PCCARD is not set
+CONFIG_PCCARD=y
+CONFIG_PCMCIA_DEBUG=y
+CONFIG_PCMCIA=y
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
+
+#
+# PC-card bridges
+#
+# CONFIG_I82365 is not set
+# CONFIG_TCIC is not set
+CONFIG_PCMCIA_SA1100=y
 
 #
 # Kernel Features
 #
-# CONFIG_SMP is not set
-CONFIG_PREEMPT=y
+# CONFIG_PREEMPT is not set
 # CONFIG_NO_IDLE_HZ is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
 CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_NODES_SHIFT=2
 CONFIG_SELECT_MEMORY_MODEL=y
 # CONFIG_FLATMEM_MANUAL is not set
 CONFIG_DISCONTIGMEM_MANUAL=y
@@ -150,6 +179,7 @@ CONFIG_DISCONTIGMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_NEED_MULTIPLE_NODES=y
 # CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
 # CONFIG_LEDS is not set
 CONFIG_ALIGNMENT_TRAP=y
 
@@ -158,7 +188,7 @@ CONFIG_ALIGNMENT_TRAP=y
 #
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2   debug"
+CONFIG_CMDLINE="noinitrd root=/dev/mtdblock2 rootfstype=jffs2 fbcon=rotate:1"
 # CONFIG_XIP_KERNEL is not set
 
 #
@@ -181,14 +211,16 @@ CONFIG_FPE_NWFPE=y
 # Userspace binary formats
 #
 CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_AOUT=m
-CONFIG_BINFMT_MISC=m
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
 # CONFIG_ARTHUR is not set
 
 #
 # Power management options
 #
 CONFIG_PM=y
+CONFIG_PM_LEGACY=y
+# CONFIG_PM_DEBUG is not set
 CONFIG_APM=y
 
 #
@@ -199,6 +231,7 @@ CONFIG_NET=y
 #
 # Networking options
 #
+# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -211,16 +244,19 @@ CONFIG_IP_FIB_HASH=y
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
+# CONFIG_SYN_COOKIES is not set
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETFILTER is not set
 
 #
@@ -232,6 +268,11 @@ CONFIG_TCP_CONG_BIC=y
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
@@ -244,8 +285,11 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
 # CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
 
 #
 # Network testing
@@ -265,10 +309,15 @@ CONFIG_TCP_CONG_BIC=y
 #
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
 # CONFIG_DEBUG_DRIVER is not set
 
 #
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
 # Memory Technology Devices (MTD)
 #
 CONFIG_MTD=y
@@ -287,32 +336,49 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
 
 #
 # RAM/ROM/Flash chip drivers
 #
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_2 is not set
 CONFIG_MTD_MAP_BANK_WIDTH_4=y
 # CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
 # CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
 # CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I1 is not set
+# CONFIG_MTD_CFI_I2 is not set
+CONFIG_MTD_CFI_I4=y
 # CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_RAM is not set
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_ABSENT is not set
 CONFIG_MTD_OBSOLETE_CHIPS=y
 CONFIG_MTD_SHARP=y
+# CONFIG_MTD_XIP is not set
 
 #
 # Mapping drivers for chip access
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+CONFIG_MTD_SA1100=y
+# CONFIG_MTD_IMPA7 is not set
 # CONFIG_MTD_PLATRAM is not set
 
 #
@@ -321,7 +387,6 @@ CONFIG_MTD_SHARP=y
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
 # CONFIG_MTD_BLOCK2MTD is not set
 
 #
@@ -337,6 +402,11 @@ CONFIG_MTD_SHARP=y
 # CONFIG_MTD_NAND is not set
 
 #
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
 # Parallel port support
 #
 # CONFIG_PARPORT is not set
@@ -349,7 +419,6 @@ CONFIG_MTD_SHARP=y
 #
 # Block devices
 #
-# CONFIG_BLK_DEV_XD is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
@@ -359,20 +428,35 @@ CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=1024
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
 
 #
-# IO Schedulers
+# ATA/ATAPI/MFM/RLL support
 #
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_ATA_OVER_ETH=m
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
 
 #
-# ATA/ATAPI/MFM/RLL support
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+CONFIG_IDEDISK_MULTI_MODE=y
+CONFIG_BLK_DEV_IDECS=y
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
 #
-# CONFIG_IDE is not set
+CONFIG_IDE_GENERIC=y
+# CONFIG_IDE_ARM is not set
+# CONFIG_IDE_CHIPSETS is not set
+# CONFIG_BLK_DEV_IDEDMA is not set
+# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -402,6 +486,39 @@ CONFIG_ATA_OVER_ETH=m
 # Network device support
 #
 # CONFIG_NETDEVICES is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# PHY device support
+#
+
+#
+# Ethernet (10 or 100Mbit)
+#
+# CONFIG_NET_ETHERNET is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+CONFIG_PPP=y
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=y
+# CONFIG_PPP_SYNC_TTY is not set
+# CONFIG_PPP_DEFLATE is not set
+# CONFIG_PPP_BSDCOMP is not set
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
 
@@ -424,7 +541,7 @@ CONFIG_INPUT_TSDEV=y
 CONFIG_INPUT_TSDEV_SCREEN_X=240
 CONFIG_INPUT_TSDEV_SCREEN_Y=320
 CONFIG_INPUT_EVDEV=y
-CONFIG_INPUT_EVBUG=y
+# CONFIG_INPUT_EVBUG is not set
 
 #
 # Input Device Drivers
@@ -438,7 +555,11 @@ CONFIG_KEYBOARD_LOCOMO=y
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
 # CONFIG_INPUT_MISC is not set
 
 #
@@ -461,7 +582,16 @@ CONFIG_HW_CONSOLE=y
 #
 # Serial drivers
 #
-# CONFIG_SERIAL_8250 is not set
+CONFIG_SERIAL_8250=y
+# CONFIG_SERIAL_8250_CONSOLE is not set
+CONFIG_SERIAL_8250_CS=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+# CONFIG_SERIAL_8250_MANY_PORTS is not set
+# CONFIG_SERIAL_8250_SHARE_IRQ is not set
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_RSA is not set
 
 #
 # Non-8250 serial port support
@@ -483,94 +613,48 @@ CONFIG_UNIX98_PTYS=y
 #
 # CONFIG_WATCHDOG is not set
 # CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 
 #
 # Ftape, the floppy tape device driver
 #
-# CONFIG_RAW_DRIVER is not set
 
 #
-# TPM devices
+# PCMCIA character devices
 #
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_RAW_DRIVER is not set
 
 #
-# I2C support
+# TPM devices
 #
-CONFIG_I2C=m
-# CONFIG_I2C_CHARDEV is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
 
 #
-# I2C Algorithms
+# I2C support
 #
-CONFIG_I2C_ALGOBIT=m
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
+# CONFIG_I2C is not set
 
 #
-# I2C Hardware Bus support
+# SPI support
 #
-# CONFIG_I2C_ELEKTOR is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
 
 #
-# Miscellaneous I2C Chip support
+# Dallas's 1-wire bus
 #
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_W1 is not set
 
 #
 # Hardware Monitoring support
 #
-CONFIG_HWMON=y
+# CONFIG_HWMON is not set
 # CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 
 #
 # Misc devices
@@ -579,42 +663,33 @@ CONFIG_HWMON=y
 #
 # Multimedia Capabilities Port drivers
 #
-# CONFIG_MCP_SA11X0 is not set
+CONFIG_MCP=y
+CONFIG_MCP_SA11X0=y
+CONFIG_MCP_UCB1200=y
+CONFIG_MCP_UCB1200_TS=y
 
 #
-# Multimedia devices
+# LED devices
 #
-CONFIG_VIDEO_DEV=m
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
 
 #
-# Video For Linux
+# LED drivers
 #
+CONFIG_LEDS_LOCOMO=y
 
 #
-# Video Adapters
+# LED Triggers
 #
-# CONFIG_VIDEO_PMS is not set
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_TUNER_3036 is not set
-# CONFIG_VIDEO_OVCAMCHIP is not set
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_IDE_DISK=y
 
 #
-# Radio Adapters
+# Multimedia devices
 #
-# CONFIG_RADIO_CADET is not set
-# CONFIG_RADIO_RTRACK is not set
-# CONFIG_RADIO_RTRACK2 is not set
-# CONFIG_RADIO_AZTECH is not set
-# CONFIG_RADIO_GEMTEK is not set
-# CONFIG_RADIO_MAESTRO is not set
-# CONFIG_RADIO_SF16FMI is not set
-# CONFIG_RADIO_SF16FMR2 is not set
-# CONFIG_RADIO_TERRATEC is not set
-# CONFIG_RADIO_TRUST is not set
-# CONFIG_RADIO_TYPHOON is not set
-# CONFIG_RADIO_ZOLTRIX is not set
+# CONFIG_VIDEO_DEV is not set
 
 #
 # Digital Video Broadcasting Devices
@@ -628,8 +703,8 @@ CONFIG_FB=y
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
 # CONFIG_FB_MACMODES is not set
+# CONFIG_FB_FIRMWARE_EDID is not set
 CONFIG_FB_MODE_HELPERS=y
 # CONFIG_FB_TILEBLITTING is not set
 CONFIG_FB_SA1100=y
@@ -643,14 +718,15 @@ CONFIG_FB_SA1100=y
 # CONFIG_MDA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
 CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
+# CONFIG_FONT_8x8 is not set
 # CONFIG_FONT_8x16 is not set
 # CONFIG_FONT_6x11 is not set
 # CONFIG_FONT_7x14 is not set
 # CONFIG_FONT_PEARL_8x8 is not set
 # CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
+CONFIG_FONT_MINI_4x6=y
 # CONFIG_FONT_SUN8x16 is not set
 # CONFIG_FONT_SUN12x22 is not set
 # CONFIG_FONT_10x18 is not set
@@ -659,7 +735,11 @@ CONFIG_FONT_8x8=y
 # Logo configuration
 #
 # CONFIG_LOGO is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_DEVICE=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_LCD_DEVICE=y
 
 #
 # Sound
@@ -671,20 +751,17 @@ CONFIG_FONT_8x8=y
 #
 CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
 # CONFIG_USB is not set
 
 #
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
 # USB Gadget Support
 #
-CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_GADGET is not set
 
 #
 # MMC/SD Card support
@@ -692,23 +769,24 @@ CONFIG_USB_GADGET=y
 # CONFIG_MMC is not set
 
 #
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
 # File systems
 #
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT2_FS is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
+# CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 CONFIG_ROMFS_FS=y
-CONFIG_INOTIFY=y
+# CONFIG_INOTIFY is not set
 # CONFIG_QUOTA is not set
 # CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
@@ -725,7 +803,7 @@ CONFIG_INOTIFY=y
 # DOS/FAT/NT Filesystems
 #
 CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
+# CONFIG_MSDOS_FS is not set
 CONFIG_VFAT_FS=y
 CONFIG_FAT_DEFAULT_CODEPAGE=437
 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
@@ -739,7 +817,7 @@ CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -755,11 +833,12 @@ CONFIG_RAMFS=y
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
-CONFIG_CRAMFS=y
+# CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
@@ -789,7 +868,7 @@ CONFIG_MSDOS_PARTITION=y
 #
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="cp437"
-CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_437=y
 # CONFIG_NLS_CODEPAGE_737 is not set
 # CONFIG_NLS_CODEPAGE_775 is not set
 # CONFIG_NLS_CODEPAGE_850 is not set
@@ -813,7 +892,7 @@ CONFIG_NLS_CODEPAGE_437=m
 # CONFIG_NLS_CODEPAGE_1250 is not set
 # CONFIG_NLS_CODEPAGE_1251 is not set
 # CONFIG_NLS_ASCII is not set
-CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_1=y
 # CONFIG_NLS_ISO8859_2 is not set
 # CONFIG_NLS_ISO8859_3 is not set
 # CONFIG_NLS_ISO8859_4 is not set
@@ -826,7 +905,7 @@ CONFIG_NLS_ISO8859_1=m
 # CONFIG_NLS_ISO8859_15 is not set
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=m
+# CONFIG_NLS_UTF8 is not set
 
 #
 # Profiling support
@@ -837,20 +916,23 @@ CONFIG_NLS_UTF8=m
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_DETECT_SOFTLOCKUP is not set
 # CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
+CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
 CONFIG_FRAME_POINTER=y
+# CONFIG_UNWIND_INFO is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_DEBUG_USER is not set
 # CONFIG_DEBUG_WAITQ is not set
 CONFIG_DEBUG_ERRORS=y
@@ -874,7 +956,7 @@ CONFIG_DEBUG_ERRORS=y
 #
 # Library routines
 #
-# CONFIG_CRC_CCITT is not set
+CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
diff --git a/arch/arm/configs/ep93xx_defconfig b/arch/arm/configs/ep93xx_defconfig
index 8dcc8e8ec813..b69e88bbc909 100644
--- a/arch/arm/configs/ep93xx_defconfig
+++ b/arch/arm/configs/ep93xx_defconfig
@@ -1,12 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16
-# Mon Mar 20 14:54:51 2006
+# Linux kernel version: 2.6.17-rc2
+# Wed Apr 19 21:21:01 2006
 #
 CONFIG_ARM=y
 CONFIG_MMU=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_VECTORS_BASE=0xffff0000
 
 #
 # Code maturity level options
@@ -28,6 +30,7 @@ CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
+# CONFIG_RELAY is not set
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_UID16=y
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
@@ -43,10 +46,6 @@ CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
 CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -59,7 +58,6 @@ CONFIG_OBSOLETE_INTERMODULE=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
@@ -67,6 +65,7 @@ CONFIG_KMOD=y
 #
 # Block layer
 #
+# CONFIG_BLK_DEV_IO_TRACE is not set
 
 #
 # IO Schedulers
@@ -94,6 +93,7 @@ CONFIG_ARCH_EP93XX=y
 # CONFIG_ARCH_IOP3XX is not set
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP23XX is not set
 # CONFIG_ARCH_L7200 is not set
 # CONFIG_ARCH_PXA is not set
 # CONFIG_ARCH_RPC is not set
@@ -112,7 +112,6 @@ CONFIG_ARCH_EP93XX=y
 #
 # Cirrus EP93xx Implementation Options
 #
-CONFIG_CRUNCH=y
 
 #
 # EP93xx Platforms
@@ -232,12 +231,15 @@ CONFIG_SYN_COOKIES=y
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETFILTER is not set
 
 #
@@ -346,7 +348,6 @@ CONFIG_MTD_CFI_I2=y
 # CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_CFI_AMDSTD_RETRY=0
 CONFIG_MTD_CFI_STAA=y
 CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_RAM is not set
@@ -371,7 +372,6 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=1
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
 # CONFIG_MTD_BLOCK2MTD is not set
 
 #
@@ -412,7 +412,7 @@ CONFIG_MTD_NAND_IDS=y
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_UB is not set
 # CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
+# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 
@@ -576,13 +576,13 @@ CONFIG_WATCHDOG=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
+CONFIG_EP93XX_WATCHDOG=y
 
 #
 # USB-based Watchdog Cards
 #
 # CONFIG_USBPCWATCHDOG is not set
 # CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 
@@ -626,9 +626,7 @@ CONFIG_I2C_ALGOBIT=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
 # CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_RTC_X1205_I2C is not set
 CONFIG_I2C_DEBUG_CORE=y
 CONFIG_I2C_DEBUG_ALGO=y
 CONFIG_I2C_DEBUG_BUS=y
@@ -690,7 +688,16 @@ CONFIG_HWMON=y
 #
 
 #
-# Multimedia Capabilities Port drivers
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
 #
 
 #
@@ -702,6 +709,7 @@ CONFIG_HWMON=y
 # Digital Video Broadcasting Devices
 #
 # CONFIG_DVB is not set
+# CONFIG_USB_DABUSB is not set
 
 #
 # Graphics support
@@ -718,6 +726,7 @@ CONFIG_HWMON=y
 #
 CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
 
@@ -776,15 +785,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_MICROTEK is not set
 
 #
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-
-#
-# Video4Linux support is needed for USB Multimedia device support
-#
-
-#
 # USB Network Adapters
 #
 # CONFIG_USB_CATC is not set
@@ -813,6 +813,7 @@ CONFIG_USB_SERIAL_CONSOLE=y
 # CONFIG_USB_SERIAL_CYPRESS_M8 is not set
 # CONFIG_USB_SERIAL_EMPEG is not set
 # CONFIG_USB_SERIAL_FTDI_SIO is not set
+# CONFIG_USB_SERIAL_FUNSOFT is not set
 # CONFIG_USB_SERIAL_VISOR is not set
 # CONFIG_USB_SERIAL_IPAQ is not set
 # CONFIG_USB_SERIAL_IR is not set
@@ -825,6 +826,7 @@ CONFIG_USB_SERIAL_CONSOLE=y
 # CONFIG_USB_SERIAL_KLSI is not set
 # CONFIG_USB_SERIAL_KOBIL_SCT is not set
 # CONFIG_USB_SERIAL_MCT_U232 is not set
+# CONFIG_USB_SERIAL_NAVMAN is not set
 CONFIG_USB_SERIAL_PL2303=y
 # CONFIG_USB_SERIAL_HP4X is not set
 # CONFIG_USB_SERIAL_SAFE is not set
@@ -865,6 +867,32 @@ CONFIG_USB_SERIAL_PL2303=y
 # CONFIG_MMC is not set
 
 #
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+
+#
+# RTC drivers
+#
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+CONFIG_RTC_DRV_M48T86=y
+CONFIG_RTC_DRV_EP93XX=y
+# CONFIG_RTC_DRV_TEST is not set
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
@@ -912,7 +940,6 @@ CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -1044,6 +1071,7 @@ CONFIG_LOG_BUF_SHIFT=14
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 CONFIG_DEBUG_SLAB=y
+# CONFIG_DEBUG_SLAB_LEAK is not set
 CONFIG_DEBUG_MUTEXES=y
 CONFIG_DEBUG_SPINLOCK=y
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
@@ -1053,6 +1081,7 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_FS is not set
 # CONFIG_DEBUG_VM is not set
 CONFIG_FRAME_POINTER=y
+# CONFIG_UNWIND_INFO is not set
 CONFIG_FORCED_INLINING=y
 # CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_DEBUG_USER=y
diff --git a/arch/arm/configs/ixp2000_defconfig b/arch/arm/configs/ixp2000_defconfig
index 7b02ca04c3ee..e6f3e4873d6c 100644
--- a/arch/arm/configs/ixp2000_defconfig
+++ b/arch/arm/configs/ixp2000_defconfig
@@ -1,18 +1,19 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16-rc2
-# Wed Feb  8 04:49:11 2006
+# Linux kernel version: 2.6.17-rc2
+# Wed Apr 19 21:12:49 2006
 #
 CONFIG_ARM=y
 CONFIG_MMU=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_VECTORS_BASE=0xffff0000
 
 #
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 
@@ -29,6 +30,7 @@ CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+# CONFIG_RELAY is not set
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_UID16=y
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
@@ -44,10 +46,6 @@ CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
 CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -60,7 +58,6 @@ CONFIG_OBSOLETE_INTERMODULE=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
@@ -68,6 +65,7 @@ CONFIG_KMOD=y
 #
 # Block layer
 #
+# CONFIG_BLK_DEV_IO_TRACE is not set
 
 #
 # IO Schedulers
@@ -89,11 +87,13 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_ARCH_CLPS711X is not set
 # CONFIG_ARCH_CO285 is not set
 # CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
 # CONFIG_ARCH_INTEGRATOR is not set
 # CONFIG_ARCH_IOP3XX is not set
 # CONFIG_ARCH_IXP4XX is not set
 CONFIG_ARCH_IXP2000=y
+# CONFIG_ARCH_IXP23XX is not set
 # CONFIG_ARCH_L7200 is not set
 # CONFIG_ARCH_PXA is not set
 # CONFIG_ARCH_RPC is not set
@@ -123,6 +123,7 @@ CONFIG_ARCH_IXDP2800=y
 CONFIG_ARCH_IXDP2X00=y
 CONFIG_ARCH_IXDP2401=y
 CONFIG_ARCH_IXDP2801=y
+CONFIG_MACH_IXDP28X5=y
 CONFIG_ARCH_IXDP2X01=y
 # CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO is not set
 
@@ -147,7 +148,6 @@ CONFIG_XSCALE_PMU=y
 # Bus support
 #
 CONFIG_PCI=y
-CONFIG_PCI_LEGACY_PROC=y
 # CONFIG_PCI_DEBUG is not set
 
 #
@@ -160,6 +160,7 @@ CONFIG_PCI_LEGACY_PROC=y
 #
 # CONFIG_PREEMPT is not set
 # CONFIG_NO_IDLE_HZ is not set
+CONFIG_HZ=100
 # CONFIG_AEABI is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -213,6 +214,7 @@ CONFIG_NET=y
 #
 # Networking options
 #
+# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -232,12 +234,15 @@ CONFIG_SYN_COOKIES=y
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETFILTER is not set
 
 #
@@ -347,7 +352,6 @@ CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_ABSENT is not set
 # CONFIG_MTD_OBSOLETE_CHIPS is not set
-# CONFIG_MTD_XIP is not set
 
 #
 # Mapping drivers for chip access
@@ -366,7 +370,6 @@ CONFIG_MTD_IXP2000=y
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
 # CONFIG_MTD_BLOCK2MTD is not set
 
 #
@@ -614,8 +617,9 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
 CONFIG_SERIAL_8250_NR_UARTS=3
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=3
 # CONFIG_SERIAL_8250_EXTENDED is not set
 
 #
@@ -623,6 +627,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -650,7 +655,6 @@ CONFIG_IXP2000_WATCHDOG=y
 # CONFIG_PCIPCWATCHDOG is not set
 # CONFIG_WDTPCI is not set
 # CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
@@ -696,7 +700,6 @@ CONFIG_I2C_IXP2000=y
 # CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_PROSAVAGE is not set
 # CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
@@ -715,9 +718,7 @@ CONFIG_SENSORS_EEPROM=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
 # CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_RTC_X1205_I2C is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@@ -730,6 +731,11 @@ CONFIG_SENSORS_EEPROM=y
 # CONFIG_SPI_MASTER is not set
 
 #
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
 # Hardware Monitoring support
 #
 CONFIG_HWMON=y
@@ -742,6 +748,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ASB100 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_FSCHER is not set
 # CONFIG_SENSORS_FSCPOS is not set
 # CONFIG_SENSORS_GL518SM is not set
@@ -776,7 +783,16 @@ CONFIG_HWMON=y
 #
 
 #
-# Multimedia Capabilities Port drivers
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
 #
 
 #
@@ -804,6 +820,7 @@ CONFIG_HWMON=y
 #
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
 
 #
@@ -821,6 +838,12 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_MMC is not set
 
 #
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
@@ -870,7 +893,6 @@ CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -972,6 +994,7 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_FS is not set
 # CONFIG_DEBUG_VM is not set
 CONFIG_FRAME_POINTER=y
+# CONFIG_UNWIND_INFO is not set
 CONFIG_FORCED_INLINING=y
 # CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_DEBUG_USER=y
diff --git a/arch/arm/configs/ixp23xx_defconfig b/arch/arm/configs/ixp23xx_defconfig
index 1a2751e9ab05..9ce898a6cf87 100644
--- a/arch/arm/configs/ixp23xx_defconfig
+++ b/arch/arm/configs/ixp23xx_defconfig
@@ -1,12 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16
-# Tue Mar 21 03:27:20 2006
+# Linux kernel version: 2.6.17-rc2
+# Wed Apr 19 21:13:50 2006
 #
 CONFIG_ARM=y
 CONFIG_MMU=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_VECTORS_BASE=0xffff0000
 
 #
 # Code maturity level options
@@ -28,6 +30,7 @@ CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+# CONFIG_RELAY is not set
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_UID16=y
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
@@ -43,10 +46,6 @@ CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
 CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -59,7 +58,6 @@ CONFIG_OBSOLETE_INTERMODULE=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
@@ -67,6 +65,7 @@ CONFIG_KMOD=y
 #
 # Block layer
 #
+# CONFIG_BLK_DEV_IO_TRACE is not set
 
 #
 # IO Schedulers
@@ -143,7 +142,6 @@ CONFIG_CPU_BIG_ENDIAN=y
 # Bus support
 #
 CONFIG_PCI=y
-CONFIG_PCI_LEGACY_PROC=y
 # CONFIG_PCI_DEBUG is not set
 
 #
@@ -230,12 +228,15 @@ CONFIG_SYN_COOKIES=y
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETFILTER is not set
 
 #
@@ -365,7 +366,6 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=1
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
 # CONFIG_MTD_BLOCK2MTD is not set
 
 #
@@ -527,7 +527,6 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_SCSI_INIA100 is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
 # CONFIG_SCSI_QLA_FC is not set
 # CONFIG_SCSI_LPFC is not set
@@ -735,6 +734,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
 CONFIG_SERIAL_8250_NR_UARTS=4
 CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_8250_EXTENDED is not set
@@ -776,7 +776,6 @@ CONFIG_WATCHDOG=y
 #
 # CONFIG_USBPCWATCHDOG is not set
 # CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
@@ -821,7 +820,6 @@ CONFIG_I2C_ALGOBIT=y
 # CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_PROSAVAGE is not set
 # CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
@@ -840,9 +838,7 @@ CONFIG_SENSORS_EEPROM=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
 # CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_RTC_X1205_I2C is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@@ -907,7 +903,16 @@ CONFIG_HWMON=y
 #
 
 #
-# Multimedia Capabilities Port drivers
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
 #
 
 #
@@ -919,6 +924,7 @@ CONFIG_HWMON=y
 # Digital Video Broadcasting Devices
 #
 # CONFIG_DVB is not set
+# CONFIG_USB_DABUSB is not set
 
 #
 # Graphics support
@@ -935,6 +941,7 @@ CONFIG_HWMON=y
 #
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 # CONFIG_USB_DEBUG is not set
 
@@ -1000,9 +1007,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_ACECAD is not set
 # CONFIG_USB_KBTAB is not set
 # CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_TOUCHSCREEN is not set
 # CONFIG_USB_YEALINK is not set
 # CONFIG_USB_XPAD is not set
 # CONFIG_USB_ATI_REMOTE is not set
@@ -1017,15 +1022,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_MICROTEK is not set
 
 #
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-
-#
-# Video4Linux support is needed for USB Multimedia device support
-#
-
-#
 # USB Network Adapters
 #
 # CONFIG_USB_CATC is not set
@@ -1076,6 +1072,12 @@ CONFIG_USB_MON=y
 # CONFIG_MMC is not set
 
 #
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
@@ -1127,7 +1129,6 @@ CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -1268,6 +1269,7 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_FS is not set
 # CONFIG_DEBUG_VM is not set
 CONFIG_FRAME_POINTER=y
+# CONFIG_UNWIND_INFO is not set
 CONFIG_FORCED_INLINING=y
 # CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_DEBUG_USER=y
diff --git a/arch/arm/configs/versatile_defconfig b/arch/arm/configs/versatile_defconfig
index 2687a225aa6a..96b7a7762426 100644
--- a/arch/arm/configs/versatile_defconfig
+++ b/arch/arm/configs/versatile_defconfig
@@ -1,50 +1,55 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Mon Mar 28 00:20:50 2005
+# Linux kernel version: 2.6.17-rc3
+# Mon May  8 20:15:57 2006
 #
 CONFIG_ARM=y
 CONFIG_MMU=y
-CONFIG_UID16=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
+CONFIG_VECTORS_BASE=0xffff0000
 
 #
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
 # General setup
 #
 CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_UID16=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+CONFIG_OBSOLETE_INTERMODULE=y
 
 #
 # Loadable module support
@@ -52,23 +57,42 @@ CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
 
 #
+# Block layer
+#
+# CONFIG_BLK_DEV_IO_TRACE is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
 # System Type
 #
 # CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
 # CONFIG_ARCH_CO285 is not set
 # CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
 # CONFIG_ARCH_INTEGRATOR is not set
 # CONFIG_ARCH_IOP3XX is not set
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP23XX is not set
 # CONFIG_ARCH_L7200 is not set
 # CONFIG_ARCH_PXA is not set
 # CONFIG_ARCH_RPC is not set
@@ -78,14 +102,17 @@ CONFIG_KMOD=y
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_OMAP is not set
 CONFIG_ARCH_VERSATILE=y
+# CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_AT91RM9200 is not set
 
 #
 # Versatile platform type
 #
 CONFIG_ARCH_VERSATILE_PB=y
-# CONFIG_MACH_VERSATILE_AB is not set
+CONFIG_MACH_VERSATILE_AB=y
 
 #
 # Processor Type
@@ -106,12 +133,14 @@ CONFIG_ARM_THUMB=y
 # CONFIG_CPU_DCACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_WRITETHROUGH is not set
 # CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+CONFIG_ARM_VIC=y
 CONFIG_ICST307=y
 
 #
 # Bus support
 #
 CONFIG_ARM_AMBA=y
+# CONFIG_PCI is not set
 
 #
 # PCCARD (PCMCIA/CardBus) support
@@ -122,6 +151,18 @@ CONFIG_ARM_AMBA=y
 # Kernel Features
 #
 # CONFIG_PREEMPT is not set
+# CONFIG_NO_IDLE_HZ is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
 CONFIG_LEDS=y
 CONFIG_LEDS_TIMER=y
 CONFIG_LEDS_CPU=y
@@ -145,7 +186,7 @@ CONFIG_CMDLINE="root=1f03 mem=32M"
 CONFIG_FPE_NWFPE=y
 # CONFIG_FPE_NWFPE_XP is not set
 # CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
+CONFIG_VFP=y
 
 #
 # Userspace binary formats
@@ -159,9 +200,92 @@ CONFIG_BINFMT_ELF=y
 # Power management options
 #
 CONFIG_PM=y
+CONFIG_PM_LEGACY=y
+# CONFIG_PM_DEBUG is not set
 # CONFIG_APM is not set
 
 #
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_DIAG is not set
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
 # Device Drivers
 #
 
@@ -174,6 +298,11 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_DEBUG_DRIVER is not set
 
 #
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
 # Memory Technology Devices (MTD)
 #
 CONFIG_MTD=y
@@ -192,6 +321,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -214,6 +344,7 @@ CONFIG_MTD_CFI_I1=y
 CONFIG_MTD_CFI_I2=y
 # CONFIG_MTD_CFI_I4 is not set
 # CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
 # CONFIG_MTD_CFI_AMDSTD is not set
 # CONFIG_MTD_CFI_STAA is not set
@@ -221,7 +352,7 @@ CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_RAM is not set
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
 
 #
 # Mapping drivers for chip access
@@ -229,7 +360,7 @@ CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
 # CONFIG_MTD_PHYSMAP is not set
 CONFIG_MTD_ARM_INTEGRATOR=y
-# CONFIG_MTD_EDB7312 is not set
+# CONFIG_MTD_PLATRAM is not set
 
 #
 # Self-contained MTD device drivers
@@ -237,7 +368,6 @@ CONFIG_MTD_ARM_INTEGRATOR=y
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
 # CONFIG_MTD_BLOCK2MTD is not set
 
 #
@@ -253,6 +383,11 @@ CONFIG_MTD_ARM_INTEGRATOR=y
 # CONFIG_MTD_NAND is not set
 
 #
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
 # Parallel port support
 #
 # CONFIG_PARPORT is not set
@@ -264,7 +399,6 @@ CONFIG_MTD_ARM_INTEGRATOR=y
 #
 # Block devices
 #
-# CONFIG_BLK_DEV_FD is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
@@ -272,21 +406,13 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 # CONFIG_ATA_OVER_ETH is not set
 
 #
 # SCSI device support
 #
+# CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
 
 #
@@ -297,6 +423,7 @@ CONFIG_IOSCHED_CFQ=y
 #
 # Fusion MPT device support
 #
+# CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -307,71 +434,8 @@ CONFIG_IOSCHED_CFQ=y
 #
 
 #
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
+# Network device support
 #
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
@@ -379,11 +443,17 @@ CONFIG_NETDEVICES=y
 # CONFIG_TUN is not set
 
 #
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
 
 #
 # Ethernet (1000 Mbit)
@@ -410,6 +480,8 @@ CONFIG_SMC91X=y
 # CONFIG_SLIP is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -459,7 +531,6 @@ CONFIG_SERIO_AMBAKMI=y
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
 # CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
 
 #
 # Character devices
@@ -474,17 +545,16 @@ CONFIG_HW_CONSOLE=y
 #
 CONFIG_SERIAL_8250=m
 CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 # CONFIG_SERIAL_8250_DETECT_IRQ is not set
-CONFIG_SERIAL_8250_MULTIPORT=y
 CONFIG_SERIAL_8250_RSA=y
 
 #
 # Non-8250 serial port support
 #
-# CONFIG_SERIAL_AMBA_PL010 is not set
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
 CONFIG_SERIAL_CORE=y
@@ -503,20 +573,19 @@ CONFIG_LEGACY_PTY_COUNT=16
 #
 # CONFIG_WATCHDOG is not set
 # CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 
 #
 # Ftape, the floppy tape device driver
 #
-# CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
 
 #
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -534,60 +603,60 @@ CONFIG_I2C_ALGOBIT=y
 #
 # I2C Hardware Bus support
 #
-# CONFIG_I2C_ISA is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_STUB is not set
 # CONFIG_I2C_PCA_ISA is not set
 
 #
-# Hardware Sensors Chip support
-#
-CONFIG_I2C_SENSOR=m
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-
-#
-# Other I2C Chip support
+# Miscellaneous I2C Chip support
 #
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
 CONFIG_SENSORS_EEPROM=m
 # CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
+# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 
 #
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
 # Misc devices
 #
 
 #
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -604,27 +673,31 @@ CONFIG_FB=y
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_FIRMWARE_EDID is not set
 # CONFIG_FB_MODE_HELPERS is not set
 # CONFIG_FB_TILEBLITTING is not set
 CONFIG_FB_ARMCLCD=y
+# CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
 
 #
 # Console display driver support
 #
-# CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 CONFIG_FONTS=y
 # CONFIG_FONT_8x8 is not set
 # CONFIG_FONT_8x16 is not set
 # CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
 # CONFIG_FONT_PEARL_8x8 is not set
 CONFIG_FONT_ACORN_8x8=y
 # CONFIG_FONT_MINI_4x6 is not set
 # CONFIG_FONT_SUN8x16 is not set
 # CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
 
 #
 # Logo configuration
@@ -647,12 +720,18 @@ CONFIG_SND_PCM=m
 CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
 
 #
 # Generic devices
 #
+CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_AC97_BUS=m
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_MTPAV is not set
 # CONFIG_SND_SERIAL_U16550 is not set
@@ -661,6 +740,7 @@ CONFIG_SND_PCM_OSS=m
 #
 # ALSA ARM devices
 #
+CONFIG_SND_ARMAACI=m
 
 #
 # Open Sound System
@@ -672,9 +752,14 @@ CONFIG_SND_PCM_OSS=m
 #
 CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
 # CONFIG_USB is not set
 
 #
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
 # USB Gadget Support
 #
 # CONFIG_USB_GADGET is not set
@@ -688,25 +773,31 @@ CONFIG_MMC_BLOCK=y
 CONFIG_MMC_ARMMMCI=m
 
 #
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
+# CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
 CONFIG_MINIX_FS=y
 CONFIG_ROMFS_FS=y
+# CONFIG_INOTIFY is not set
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
 
 #
 # CD-ROM/DVD Filesystems
@@ -729,11 +820,10 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 #
 CONFIG_PROC_FS=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -748,8 +838,8 @@ CONFIG_RAMFS=y
 # CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_RTIME=y
@@ -766,16 +856,19 @@ CONFIG_CRAMFS=y
 #
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
 # CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
 # CONFIG_NFSD_TCP is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -784,6 +877,7 @@ CONFIG_SUNRPC=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -803,6 +897,7 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_SGI_PARTITION is not set
 # CONFIG_ULTRIX_PARTITION is not set
 # CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
 # CONFIG_EFI_PARTITION is not set
 
 #
@@ -858,18 +953,24 @@ CONFIG_NLS_ISO8859_1=m
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_MUTEXES is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
 CONFIG_FRAME_POINTER=y
+# CONFIG_UNWIND_INFO is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_DEBUG_USER=y
 # CONFIG_DEBUG_WAITQ is not set
 CONFIG_DEBUG_ERRORS=y
@@ -895,6 +996,7 @@ CONFIG_DEBUG_LL=y
 # Library routines
 #
 # CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index 2ce0e3a27a45..a601b8b55f35 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -29,7 +29,7 @@ ifneq ($(CONFIG_ARCH_EBSA110),y)
   obj-y		+= io.o
 endif
 
-head-y			:= head.o
+head-y			:= head$(MMUEXT).o
 obj-$(CONFIG_DEBUG_LL)	+= debug.o
 
 extra-y := $(head-y) init_task.o vmlinux.lds
diff --git a/arch/arm/kernel/asm-offsets.c b/arch/arm/kernel/asm-offsets.c
index b324dcac1c56..396efba9bacd 100644
--- a/arch/arm/kernel/asm-offsets.c
+++ b/arch/arm/kernel/asm-offsets.c
@@ -95,5 +95,13 @@ int main(void)
   DEFINE(SYS_ERROR0,		0x9f0000);
   BLANK();
   DEFINE(SIZEOF_MACHINE_DESC,	sizeof(struct machine_desc));
+  DEFINE(MACHINFO_TYPE,		offsetof(struct machine_desc, nr));
+  DEFINE(MACHINFO_NAME,		offsetof(struct machine_desc, name));
+  DEFINE(MACHINFO_PHYSIO,	offsetof(struct machine_desc, phys_io));
+  DEFINE(MACHINFO_PGOFFIO,	offsetof(struct machine_desc, io_pg_offst));
+  BLANK();
+  DEFINE(PROC_INFO_SZ,		sizeof(struct proc_info_list));
+  DEFINE(PROCINFO_INITFUNC,	offsetof(struct proc_info_list, __cpu_flush));
+  DEFINE(PROCINFO_MMUFLAGS,	offsetof(struct proc_info_list, __cpu_mmu_flags));
   return 0; 
 }
diff --git a/arch/arm/kernel/dma-isa.c b/arch/arm/kernel/dma-isa.c
index 03532769a97f..0a3e9ad297d8 100644
--- a/arch/arm/kernel/dma-isa.c
+++ b/arch/arm/kernel/dma-isa.c
@@ -143,12 +143,23 @@ static struct dma_ops isa_dma_ops = {
 	.residue	= isa_get_dma_residue,
 };
 
-static struct resource dma_resources[] = {
-	{ "dma1",		0x0000, 0x000f },
-	{ "dma low page", 	0x0080, 0x008f },
-	{ "dma2",		0x00c0, 0x00df },
-	{ "dma high page",	0x0480, 0x048f }
-};
+static struct resource dma_resources[] = { {
+	.name	= "dma1",
+	.start	= 0x0000,
+	.end	= 0x000f
+}, {
+	.name	= "dma low page",
+	.start	= 0x0080,
+	.end 	= 0x008f
+}, {
+	.name	= "dma2",
+	.start	= 0x00c0,
+	.end	= 0x00df
+}, {
+	.name	= "dma high page",
+	.start	= 0x0480,
+	.end	= 0x048f
+} };
 
 void __init isa_init_dma(dma_t *dma)
 {
diff --git a/arch/arm/kernel/head-nommu.S b/arch/arm/kernel/head-nommu.S
index b093ab8738b5..adf62e5eaad7 100644
--- a/arch/arm/kernel/head-nommu.S
+++ b/arch/arm/kernel/head-nommu.S
@@ -20,11 +20,10 @@
 #include <asm/mach-types.h>
 #include <asm/procinfo.h>
 #include <asm/ptrace.h>
-#include <asm/constants.h>
+#include <asm/asm-offsets.h>
+#include <asm/thread_info.h>
 #include <asm/system.h>
 
-#define PROCINFO_INITFUNC       12
-
 /*
  * Kernel startup entry point.
  * ---------------------------
@@ -79,5 +78,6 @@ __after_proc_init:
 
 	mov	pc, r13				@ clear the BSS and jump
 						@ to start_kernel
+	.ltorg
 
 #include "head-common.S"
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index 04b66a9328ef..04f7344e356a 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -24,14 +24,6 @@
 #include <asm/thread_info.h>
 #include <asm/system.h>
 
-#define PROCINFO_MMUFLAGS	8
-#define PROCINFO_INITFUNC	12
-
-#define MACHINFO_TYPE		0
-#define MACHINFO_PHYSIO		4
-#define MACHINFO_PGOFFIO	8
-#define MACHINFO_NAME		12
-
 #define KERNEL_RAM_ADDR	(PAGE_OFFSET + TEXT_OFFSET)
 
 /*
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index 1ff75cee4b0d..7df6e1aaa323 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -264,8 +264,12 @@ void show_fpregs(struct user_fp *regs)
 /*
  * Task structure and kernel stack allocation.
  */
-static unsigned long *thread_info_head;
-static unsigned int nr_thread_info;
+struct thread_info_list {
+	unsigned long *head;
+	unsigned int nr;
+};
+
+static DEFINE_PER_CPU(struct thread_info_list, thread_info_list) = { NULL, 0 };
 
 #define EXTRA_TASK_STRUCT	4
 
@@ -274,12 +278,15 @@ struct thread_info *alloc_thread_info(struct task_struct *task)
 	struct thread_info *thread = NULL;
 
 	if (EXTRA_TASK_STRUCT) {
-		unsigned long *p = thread_info_head;
+		struct thread_info_list *th = &get_cpu_var(thread_info_list);
+		unsigned long *p = th->head;
 
 		if (p) {
-			thread_info_head = (unsigned long *)p[0];
-			nr_thread_info -= 1;
+			th->head = (unsigned long *)p[0];
+			th->nr -= 1;
 		}
+		put_cpu_var(thread_info_list);
+
 		thread = (struct thread_info *)p;
 	}
 
@@ -300,13 +307,19 @@ struct thread_info *alloc_thread_info(struct task_struct *task)
 
 void free_thread_info(struct thread_info *thread)
 {
-	if (EXTRA_TASK_STRUCT && nr_thread_info < EXTRA_TASK_STRUCT) {
-		unsigned long *p = (unsigned long *)thread;
-		p[0] = (unsigned long)thread_info_head;
-		thread_info_head = p;
-		nr_thread_info += 1;
-	} else
-		free_pages((unsigned long)thread, THREAD_SIZE_ORDER);
+	if (EXTRA_TASK_STRUCT) {
+		struct thread_info_list *th = &get_cpu_var(thread_info_list);
+		if (th->nr < EXTRA_TASK_STRUCT) {
+			unsigned long *p = (unsigned long *)thread;
+			p[0] = (unsigned long)th->head;
+			th->head = p;
+			th->nr += 1;
+			put_cpu_var(thread_info_list);
+			return;
+		}
+		put_cpu_var(thread_info_list);
+	}
+	free_pages((unsigned long)thread, THREAD_SIZE_ORDER);
 }
 
 /*
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index 8cff73e668b3..9fc9af88c60c 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -407,7 +407,7 @@ static void __init early_initrd(char **p)
 }
 __early_param("initrd=", early_initrd);
 
-static void __init add_memory(unsigned long start, unsigned long size)
+static void __init arm_add_memory(unsigned long start, unsigned long size)
 {
 	/*
 	 * Ensure that start/size are aligned to a page boundary.
@@ -445,7 +445,7 @@ static void __init early_mem(char **p)
 	if (**p == '@')
 		start = memparse(*p + 1, p);
 
-	add_memory(start, size);
+	arm_add_memory(start, size);
 }
 __early_param("mem=", early_mem);
 
@@ -587,7 +587,7 @@ static int __init parse_tag_mem32(const struct tag *tag)
 			tag->u.mem.start, tag->u.mem.size / 1024);
 		return -EINVAL;
 	}
-	add_memory(tag->u.mem.start, tag->u.mem.size);
+	arm_add_memory(tag->u.mem.start, tag->u.mem.size);
 	return 0;
 }
 
@@ -807,7 +807,7 @@ static int __init topology_init(void)
 {
 	int cpu;
 
-	for_each_cpu(cpu)
+	for_each_possible_cpu(cpu)
 		register_cpu(&per_cpu(cpu_data, cpu).cpu, cpu, NULL);
 
 	return 0;
diff --git a/arch/arm/lib/backtrace.S b/arch/arm/lib/backtrace.S
index 3bdc8c6949c5..16153c86c3f8 100644
--- a/arch/arm/lib/backtrace.S
+++ b/arch/arm/lib/backtrace.S
@@ -122,7 +122,7 @@ ENTRY(c_backtrace)
 #define reg   r5
 #define stack r6
 
-.Ldumpstm:	stmfd	sp!, {instr, reg, stack, r7, lr}
+.Ldumpstm:	stmfd	sp!, {instr, reg, stack, r7, r8, lr}
 		mov	stack, r0
 		mov	instr, r1
 		mov	reg, #9
@@ -145,7 +145,7 @@ ENTRY(c_backtrace)
 		adrne	r0, .Lcr
 		blne	printk
 		mov	r0, stack
-		LOADREGS(fd, sp!, {instr, reg, stack, r7, pc})
+		LOADREGS(fd, sp!, {instr, reg, stack, r7, r8, pc})
 
 .Lfp:		.asciz	" r%d = %08X%c"
 .Lcr:		.asciz	"\n"
diff --git a/arch/arm/lib/div64.S b/arch/arm/lib/div64.S
index ec9a1cd6176f..58eef6607629 100644
--- a/arch/arm/lib/div64.S
+++ b/arch/arm/lib/div64.S
@@ -189,12 +189,12 @@ ENTRY(__do_div64)
 	moveq	pc, lr
 
 	@ Division by 0:
-	str	lr, [sp, #-4]!
+	str	lr, [sp, #-8]!
 	bl	__div0
 
 	@ as wrong as it could be...
 	mov	yl, #0
 	mov	yh, #0
 	mov	xh, #0
-	ldr	pc, [sp], #4
+	ldr	pc, [sp], #8
 
diff --git a/arch/arm/mach-aaec2000/aaed2000.c b/arch/arm/mach-aaec2000/aaed2000.c
index dc5fa8e5ebef..83f57da3184c 100644
--- a/arch/arm/mach-aaec2000/aaed2000.c
+++ b/arch/arm/mach-aaec2000/aaed2000.c
@@ -79,7 +79,12 @@ static void __init aaed2000_init(void)
 }
 
 static struct map_desc aaed2000_io_desc[] __initdata = {
-  { EXT_GPIO_VBASE, EXT_GPIO_PBASE, EXT_GPIO_LENGTH, MT_DEVICE }, /* Ext GPIO */
+	{
+		.virtual	= EXT_GPIO_VBASE,
+		.pfn            = __phys_to_pfn(EXT_GPIO_PBASE),
+		.length         = EXT_GPIO_LENGTH,
+		.type           = MT_DEVICE
+	},
 };
 
 static void __init aaed2000_map_io(void)
diff --git a/arch/arm/mach-aaec2000/core.c b/arch/arm/mach-aaec2000/core.c
index dce4815cf53c..65be5efd633c 100644
--- a/arch/arm/mach-aaec2000/core.c
+++ b/arch/arm/mach-aaec2000/core.c
@@ -20,7 +20,6 @@
 #include <linux/interrupt.h>
 #include <linux/timex.h>
 #include <linux/signal.h>
-#include <linux/amba/bus.h>
 
 #include <asm/hardware.h>
 #include <asm/irq.h>
@@ -50,12 +49,12 @@
 static struct map_desc standard_io_desc[] __initdata = {
 	{
 		.virtual	= VIO_APB_BASE,
-		.physical	= __phys_to_pfn(PIO_APB_BASE),
+		.pfn		= __phys_to_pfn(PIO_APB_BASE),
 		.length		= IO_APB_LENGTH,
 		.type		= MT_DEVICE
 	}, {
 		.virtual	= VIO_AHB_BASE,
-		.physical	= __phys_to_pfn(PIO_AHB_BASE),
+		.pfn		= __phys_to_pfn(PIO_AHB_BASE),
 		.length		= IO_AHB_LENGTH,
 		.type		= MT_DEVICE
 	}
diff --git a/arch/arm/mach-aaec2000/core.h b/arch/arm/mach-aaec2000/core.h
index b6029a95f19c..59501b573167 100644
--- a/arch/arm/mach-aaec2000/core.h
+++ b/arch/arm/mach-aaec2000/core.h
@@ -9,6 +9,7 @@
  *
  */
 
+#include <linux/amba/bus.h>
 #include <linux/amba/clcd.h>
 
 struct sys_timer;
diff --git a/arch/arm/mach-at91rm9200/devices.c b/arch/arm/mach-at91rm9200/devices.c
index 1781b8f342c4..bfe47bd6e50c 100644
--- a/arch/arm/mach-at91rm9200/devices.c
+++ b/arch/arm/mach-at91rm9200/devices.c
@@ -194,13 +194,23 @@ void __init at91_add_device_eth(struct at91_eth_data *data) {}
 #if defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE)
 static struct at91_cf_data cf_data;
 
+static struct resource at91_cf_resources[] = {
+	[0] = {
+		.start	= AT91_CF_BASE,
+		/* ties up CS4, CS5, and CS6 */
+		.end	= AT91_CF_BASE + (0x30000000 - 1),
+		.flags	= IORESOURCE_MEM | IORESOURCE_MEM_8AND16BIT,
+	},
+};
+
 static struct platform_device at91rm9200_cf_device = {
 	.name		= "at91_cf",
 	.id		= -1,
 	.dev		= {
 				.platform_data		= &cf_data,
 	},
-	.num_resources	= 0,
+	.resource	= at91_cf_resources,
+	.num_resources	= ARRAY_SIZE(at91_cf_resources),
 };
 
 void __init at91_add_device_cf(struct at91_cf_data *data)
diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c
index 9be01b0c3f48..e24566b88a78 100644
--- a/arch/arm/mach-ep93xx/ts72xx.c
+++ b/arch/arm/mach-ep93xx/ts72xx.c
@@ -111,21 +111,21 @@ static void __init ts72xx_map_io(void)
 	}
 }
 
-static unsigned char ts72xx_rtc_readb(unsigned long addr)
+static unsigned char ts72xx_rtc_readbyte(unsigned long addr)
 {
 	__raw_writeb(addr, TS72XX_RTC_INDEX_VIRT_BASE);
 	return __raw_readb(TS72XX_RTC_DATA_VIRT_BASE);
 }
 
-static void ts72xx_rtc_writeb(unsigned char value, unsigned long addr)
+static void ts72xx_rtc_writebyte(unsigned char value, unsigned long addr)
 {
 	__raw_writeb(addr, TS72XX_RTC_INDEX_VIRT_BASE);
 	__raw_writeb(value, TS72XX_RTC_DATA_VIRT_BASE);
 }
 
 static struct m48t86_ops ts72xx_rtc_ops = {
-	.readb			= ts72xx_rtc_readb,
-	.writeb			= ts72xx_rtc_writeb,
+	.readbyte		= ts72xx_rtc_readbyte,
+	.writebyte		= ts72xx_rtc_writebyte,
 };
 
 static struct platform_device ts72xx_rtc_device = {
diff --git a/arch/arm/mach-imx/generic.c b/arch/arm/mach-imx/generic.c
index 9d8331be2b58..12ea58a3b84f 100644
--- a/arch/arm/mach-imx/generic.c
+++ b/arch/arm/mach-imx/generic.c
@@ -195,56 +195,6 @@ void __init imx_set_mmc_info(struct imxmmc_platform_data *info)
 }
 EXPORT_SYMBOL(imx_set_mmc_info);
 
-static struct resource imx_uart1_resources[] = {
-	[0] = {
-		.start	= 0x00206000,
-		.end	= 0x002060FF,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= (UART1_MINT_RX),
-		.end	= (UART1_MINT_RX),
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start	= (UART1_MINT_TX),
-		.end	= (UART1_MINT_TX),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device imx_uart1_device = {
-	.name		= "imx-uart",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(imx_uart1_resources),
-	.resource	= imx_uart1_resources,
-};
-
-static struct resource imx_uart2_resources[] = {
-	[0] = {
-		.start	= 0x00207000,
-		.end	= 0x002070FF,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= (UART2_MINT_RX),
-		.end	= (UART2_MINT_RX),
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start	= (UART2_MINT_TX),
-		.end	= (UART2_MINT_TX),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device imx_uart2_device = {
-	.name		= "imx-uart",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(imx_uart2_resources),
-	.resource	= imx_uart2_resources,
-};
-
 static struct imxfb_mach_info imx_fb_info;
 
 void __init set_imx_fb_info(struct imxfb_mach_info *hard_imx_fb_info)
@@ -283,8 +233,6 @@ static struct platform_device imxfb_device = {
 static struct platform_device *devices[] __initdata = {
 	&imx_mmc_device,
 	&imxfb_device,
-	&imx_uart1_device,
-	&imx_uart2_device,
 };
 
 static struct map_desc imx_io_desc[] __initdata = {
diff --git a/arch/arm/mach-imx/mx1ads.c b/arch/arm/mach-imx/mx1ads.c
index e34d0df90aed..da893c80d471 100644
--- a/arch/arm/mach-imx/mx1ads.c
+++ b/arch/arm/mach-imx/mx1ads.c
@@ -26,6 +26,7 @@
 
 #include <asm/mach/arch.h>
 #include <asm/arch/mmc.h>
+#include <asm/arch/imx-uart.h>
 #include <linux/interrupt.h>
 #include "generic.h"
 
@@ -48,8 +49,70 @@ static struct platform_device cs89x0_device = {
 	.resource	= cs89x0_resources,
 };
 
+static struct imxuart_platform_data uart_pdata = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct resource imx_uart1_resources[] = {
+	[0] = {
+		.start	= 0x00206000,
+		.end	= 0x002060FF,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= (UART1_MINT_RX),
+		.end	= (UART1_MINT_RX),
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= (UART1_MINT_TX),
+		.end	= (UART1_MINT_TX),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device imx_uart1_device = {
+	.name		= "imx-uart",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(imx_uart1_resources),
+	.resource	= imx_uart1_resources,
+	.dev = {
+		.platform_data = &uart_pdata,
+	}
+};
+
+static struct resource imx_uart2_resources[] = {
+	[0] = {
+		.start	= 0x00207000,
+		.end	= 0x002070FF,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= (UART2_MINT_RX),
+		.end	= (UART2_MINT_RX),
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= (UART2_MINT_TX),
+		.end	= (UART2_MINT_TX),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device imx_uart2_device = {
+	.name		= "imx-uart",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(imx_uart2_resources),
+	.resource	= imx_uart2_resources,
+	.dev = {
+		.platform_data = &uart_pdata,
+	}
+};
+
 static struct platform_device *devices[] __initdata = {
 	&cs89x0_device,
+	&imx_uart1_device,
+	&imx_uart2_device,
 };
 
 #ifdef CONFIG_MMC_IMX
@@ -75,6 +138,17 @@ mx1ads_init(void)
 	imx_gpio_mode(GPIO_PORTB | GPIO_GIUS | GPIO_IN | 20);
 	imx_set_mmc_info(&mx1ads_mmc_info);
 #endif
+
+	imx_gpio_mode(PC9_PF_UART1_CTS);
+	imx_gpio_mode(PC10_PF_UART1_RTS);
+	imx_gpio_mode(PC11_PF_UART1_TXD);
+	imx_gpio_mode(PC12_PF_UART1_RXD);
+
+	imx_gpio_mode(PB28_PF_UART2_CTS);
+	imx_gpio_mode(PB29_PF_UART2_RTS);
+	imx_gpio_mode(PB30_PF_UART2_TXD);
+	imx_gpio_mode(PB31_PF_UART2_RXD);
+
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 }
 
@@ -87,7 +161,7 @@ mx1ads_map_io(void)
 MACHINE_START(MX1ADS, "Motorola MX1ADS")
 	/* Maintainer: Sascha Hauer, Pengutronix */
 	.phys_io	= 0x00200000,
-	.io_pg_offst	= ((0xe0200000) >> 18) & 0xfffc,
+	.io_pg_offst	= ((0xe0000000) >> 18) & 0xfffc,
 	.boot_params	= 0x08000100,
 	.map_io		= mx1ads_map_io,
 	.init_irq	= imx_init_irq,
diff --git a/arch/arm/mach-ixp23xx/core.c b/arch/arm/mach-ixp23xx/core.c
index 092ee12ced42..affd1d5d7440 100644
--- a/arch/arm/mach-ixp23xx/core.c
+++ b/arch/arm/mach-ixp23xx/core.c
@@ -178,8 +178,12 @@ static int ixp23xx_irq_set_type(unsigned int irq, unsigned int type)
 
 static void ixp23xx_irq_mask(unsigned int irq)
 {
-	volatile unsigned long *intr_reg = IXP23XX_INTR_EN1 + (irq / 32);
+	volatile unsigned long *intr_reg;
 
+	if (irq >= 56)
+		irq += 8;
+
+	intr_reg = IXP23XX_INTR_EN1 + (irq / 32);
 	*intr_reg &= ~(1 << (irq % 32));
 }
 
@@ -199,17 +203,25 @@ static void ixp23xx_irq_ack(unsigned int irq)
  */
 static void ixp23xx_irq_level_unmask(unsigned int irq)
 {
-	volatile unsigned long *intr_reg = IXP23XX_INTR_EN1 + (irq / 32);
+	volatile unsigned long *intr_reg;
 
 	ixp23xx_irq_ack(irq);
 
+	if (irq >= 56)
+		irq += 8;
+
+	intr_reg = IXP23XX_INTR_EN1 + (irq / 32);
 	*intr_reg |= (1 << (irq % 32));
 }
 
 static void ixp23xx_irq_edge_unmask(unsigned int irq)
 {
-	volatile unsigned long *intr_reg = IXP23XX_INTR_EN1 + (irq / 32);
+	volatile unsigned long *intr_reg;
+
+	if (irq >= 56)
+		irq += 8;
 
+	intr_reg = IXP23XX_INTR_EN1 + (irq / 32);
 	*intr_reg |= (1 << (irq % 32));
 }
 
diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig
index 5bf50a2a737d..3b23f43cb160 100644
--- a/arch/arm/mach-ixp4xx/Kconfig
+++ b/arch/arm/mach-ixp4xx/Kconfig
@@ -11,6 +11,7 @@ comment "IXP4xx Platforms"
 config MACH_NSLU2
 	bool
 	prompt "Linksys NSLU2"
+	select PCI
 	help
 	  Say 'Y' here if you want your kernel to support Linksys's
 	  NSLU2 NAS device. For more information on this platform,
@@ -18,6 +19,7 @@ config MACH_NSLU2
 
 config ARCH_AVILA
 	bool "Avila"
+	select PCI
 	help
 	  Say 'Y' here if you want your kernel to support the Gateworks
 	  Avila Network Platform. For more information on this platform,
@@ -25,6 +27,7 @@ config ARCH_AVILA
 
 config ARCH_ADI_COYOTE
 	bool "Coyote"
+	select PCI
 	help
 	  Say 'Y' here if you want your kernel to support the ADI 
 	  Engineering Coyote Gateway Reference Platform. For more
@@ -32,6 +35,7 @@ config ARCH_ADI_COYOTE
 
 config ARCH_IXDP425
 	bool "IXDP425"
+	select PCI
 	help
 	  Say 'Y' here if you want your kernel to support Intel's 
 	  IXDP425 Development Platform (Also known as Richfield).  
@@ -39,6 +43,7 @@ config ARCH_IXDP425
 
 config MACH_IXDPG425
 	bool "IXDPG425"
+	select PCI
 	help
 	  Say 'Y' here if you want your kernel to support Intel's
 	  IXDPG425 Development Platform (Also known as Montajade).
@@ -46,6 +51,7 @@ config MACH_IXDPG425
 
 config MACH_IXDP465
 	bool "IXDP465"
+	select PCI
 	help
 	  Say 'Y' here if you want your kernel to support Intel's
 	  IXDP465 Development Platform (Also known as BMP).
@@ -72,6 +78,7 @@ config ARCH_PRPMC1100
 config MACH_NAS100D
 	bool
 	prompt "NAS100D"
+	select PCI
 	help
 	  Say 'Y' here if you want your kernel to support Iomega's
 	  NAS 100d device. For more information on this platform,
@@ -96,6 +103,7 @@ config CPU_IXP46X
 config MACH_GTWX5715
 	bool "Gemtek WX5715 (Linksys WRV54G)"
 	depends on ARCH_IXP4XX
+	select PCI
 	help
 		This board is currently inside the Linksys WRV54G Gateways.
 
@@ -110,11 +118,16 @@ config MACH_GTWX5715
 		"High Speed" UART is n/c (as far as I can tell)
 		20 Pin ARM/Xscale JTAG interface on J2
 
-
 comment "IXP4xx Options"
 
+config DMABOUNCE
+	bool
+	default y
+	depends on PCI
+
 config IXP4XX_INDIRECT_PCI
 	bool "Use indirect PCI memory access"
+	depends on PCI
 	help
           IXP4xx provides two methods of accessing PCI memory space:
 
@@ -128,7 +141,7 @@ config IXP4XX_INDIRECT_PCI
           2) If > 64MB of memory space is required, the IXP4xx can be 
 	     configured to use indirect registers to access PCI This allows 
 	     for up to 128MB (0x48000000 to 0x4fffffff) of memory on the bus. 
-	     The disadvantadge of this is that every PCI access requires 
+	     The disadvantage of this is that every PCI access requires 
 	     three local register accesses plus a spinlock, but in some 
 	     cases the performance hit is acceptable. In addition, you cannot 
 	     mmap() PCI devices in this case due to the indirect nature
diff --git a/arch/arm/mach-ixp4xx/Makefile b/arch/arm/mach-ixp4xx/Makefile
index 0471044fa179..5a4aaa0e0a09 100644
--- a/arch/arm/mach-ixp4xx/Makefile
+++ b/arch/arm/mach-ixp4xx/Makefile
@@ -2,8 +2,9 @@
 # Makefile for the linux kernel.
 #
 
-obj-y	+= common.o common-pci.o 
+obj-y	+= common.o
 
+obj-$(CONFIG_PCI)		+= common-pci.o
 obj-$(CONFIG_ARCH_IXDP4XX)	+= ixdp425-pci.o ixdp425-setup.o
 obj-$(CONFIG_MACH_IXDPG425)	+= ixdpg425-pci.o coyote-setup.o
 obj-$(CONFIG_ARCH_ADI_COYOTE)	+= coyote-pci.o coyote-setup.o
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index a0888e160e3b..00b761ff0f9c 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -91,7 +91,7 @@ static void ixp4xx_config_irq(unsigned irq, enum ixp4xx_irq_type type);
 /*
  * IRQ -> GPIO mapping table
  */
-static char irq2gpio[32] = {
+static signed char irq2gpio[32] = {
 	-1, -1, -1, -1, -1, -1,  0,  1,
 	-1, -1, -1, -1, -1, -1, -1, -1,
 	-1, -1, -1,  2,  3,  4,  5,  6,
diff --git a/arch/arm/mach-pxa/corgi_ssp.c b/arch/arm/mach-pxa/corgi_ssp.c
index b371d723635f..8a25a1c8019f 100644
--- a/arch/arm/mach-pxa/corgi_ssp.c
+++ b/arch/arm/mach-pxa/corgi_ssp.c
@@ -196,12 +196,9 @@ static int __init corgi_ssp_probe(struct platform_device *dev)
 	int ret;
 
 	/* Chip Select - Disable All */
-	GPDR(ssp_machinfo->cs_lcdcon) |= GPIO_bit(ssp_machinfo->cs_lcdcon); /* output */
-	GPSR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon);  /* High - Disable LCD Control/Timing Gen */
-	GPDR(ssp_machinfo->cs_max1111) |= GPIO_bit(ssp_machinfo->cs_max1111); /* output */
-	GPSR(ssp_machinfo->cs_max1111) = GPIO_bit(ssp_machinfo->cs_max1111);  /* High - Disable MAX1111*/
-	GPDR(ssp_machinfo->cs_ads7846) |= GPIO_bit(ssp_machinfo->cs_ads7846);  /* output */
-	GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846);   /* High - Disable ADS7846*/
+	pxa_gpio_mode(ssp_machinfo->cs_lcdcon  | GPIO_OUT | GPIO_DFLT_HIGH);
+        pxa_gpio_mode(ssp_machinfo->cs_max1111 | GPIO_OUT | GPIO_DFLT_HIGH);
+        pxa_gpio_mode(ssp_machinfo->cs_ads7846 | GPIO_OUT | GPIO_DFLT_HIGH);
 
 	ret = ssp_init(&corgi_ssp_dev, ssp_machinfo->port, 0);
 
diff --git a/arch/arm/mach-pxa/dma.c b/arch/arm/mach-pxa/dma.c
index 458112b21e25..7d8c85486c66 100644
--- a/arch/arm/mach-pxa/dma.c
+++ b/arch/arm/mach-pxa/dma.c
@@ -45,23 +45,16 @@ int pxa_request_dma (char *name, pxa_dma_prio prio,
 
 	local_irq_save(flags);
 
-	/* try grabbing a DMA channel with the requested priority */
-	for (i = prio; i < prio + PXA_DMA_NBCH(prio); i++) {
-		if (!dma_channels[i].name) {
-			found = 1;
-			break;
-		}
-	}
-
-	if (!found) {
-		/* requested prio group is full, try hier priorities */
-		for (i = prio-1; i >= 0; i--) {
+	do {
+		/* try grabbing a DMA channel with the requested priority */
+		pxa_for_each_dma_prio (i, prio) {
 			if (!dma_channels[i].name) {
 				found = 1;
 				break;
 			}
 		}
-	}
+		/* if requested prio group is full, try a hier priority */
+	} while (!found && prio--);
 
 	if (found) {
 		DCSR(i) = DCSR_STARTINTR|DCSR_ENDINTR|DCSR_BUSERR;
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index 98356f810007..b307f11951df 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -95,7 +95,10 @@ static void __init mainstone_init_irq(void)
 	for(irq = MAINSTONE_IRQ(0); irq <= MAINSTONE_IRQ(15); irq++) {
 		set_irq_chip(irq, &mainstone_irq_chip);
 		set_irq_handler(irq, do_level_IRQ);
-		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+		if (irq == MAINSTONE_IRQ(10) || irq == MAINSTONE_IRQ(14))
+			set_irq_flags(irq, IRQF_VALID | IRQF_PROBE | IRQF_NOAUTOEN);
+		else
+			set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
 	}
 	set_irq_flags(MAINSTONE_IRQ(8), 0);
 	set_irq_flags(MAINSTONE_IRQ(12), 0);
@@ -490,6 +493,7 @@ static void __init mainstone_map_io(void)
 MACHINE_START(MAINSTONE, "Intel HCDDBBVA0 Development Platform (aka Mainstone)")
 	/* Maintainer: MontaVista Software Inc. */
 	.phys_io	= 0x40000000,
+	.boot_params	= 0xa0000100,	/* BLOB boot parameter setting */
 	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.map_io		= mainstone_map_io,
 	.init_irq	= mainstone_init_irq,
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index d4a586e38d5b..693fb1e396e0 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -137,8 +137,11 @@ static struct amba_device *amba_devs[] __initdata = {
 static void __init gic_init_irq(void)
 {
 #ifdef CONFIG_REALVIEW_MPCORE
+	unsigned int pldctrl;
 	writel(0x0000a05f, __io_address(REALVIEW_SYS_LOCK));
-	writel(0x008003c0, __io_address(REALVIEW_SYS_BASE) + 0xd8);
+	pldctrl = readl(__io_address(REALVIEW_SYS_BASE)	+ 0xd8);
+	pldctrl |= 0x00800000;	/* New irq mode */
+	writel(pldctrl, __io_address(REALVIEW_SYS_BASE) + 0xd8);
 	writel(0x00000000, __io_address(REALVIEW_SYS_LOCK));
 #endif
 	gic_dist_init(__io_address(REALVIEW_GIC_DIST_BASE));
diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
index ce7d81000695..970f98dadffc 100644
--- a/arch/arm/mach-s3c2410/Kconfig
+++ b/arch/arm/mach-s3c2410/Kconfig
@@ -170,7 +170,7 @@ config S3C2410_PM_DEBUG
 	depends on ARCH_S3C2410 && PM
 	help
 	  Say Y here if you want verbose debugging from the PM Suspend and
-	  Resume code. See `Documentation/arm/Samsing-S3C24XX/Suspend.txt`
+	  Resume code. See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
 	  for more information.
 
 config S3C2410_PM_CHECK
diff --git a/arch/arm/mach-s3c2410/common-smdk.c b/arch/arm/mach-s3c2410/common-smdk.c
index f372fbda124e..c940890f621f 100644
--- a/arch/arm/mach-s3c2410/common-smdk.c
+++ b/arch/arm/mach-s3c2410/common-smdk.c
@@ -50,7 +50,7 @@ static struct mtd_partition smdk_default_nand_part[] = {
 		.offset	= 0,
 	},
 	[1] = {
-		.name	= "S3C2410 flash parition 1",
+		.name	= "S3C2410 flash partition 1",
 		.offset = 0,
 		.size	= SZ_2M,
 	},
diff --git a/arch/arm/mach-s3c2410/s3c2440-clock.c b/arch/arm/mach-s3c2410/s3c2440-clock.c
index 57a15974d4b5..d7a30ed6c327 100644
--- a/arch/arm/mach-s3c2410/s3c2440-clock.c
+++ b/arch/arm/mach-s3c2410/s3c2440-clock.c
@@ -139,7 +139,7 @@ static int s3c2440_clk_add(struct sys_device *sysdev)
 
 		clkdivn = __raw_readl(S3C2410_CLKDIVN);
 		clkdivn |= S3C2440_CLKDIVN_UCLK;
-		__raw_writel(camdivn, S3C2410_CLKDIVN);
+		__raw_writel(clkdivn, S3C2410_CLKDIVN);
 
 		mutex_unlock(&clocks_mutex);
 	}
diff --git a/arch/arm/mach-s3c2410/sleep.S b/arch/arm/mach-s3c2410/sleep.S
index 832fb86a03b4..73de2eaca22a 100644
--- a/arch/arm/mach-s3c2410/sleep.S
+++ b/arch/arm/mach-s3c2410/sleep.S
@@ -59,8 +59,7 @@ ENTRY(s3c2410_cpu_suspend)
 	mrc	p15, 0, r5, c13, c0, 0	@ PID
 	mrc	p15, 0, r6, c3, c0, 0	@ Domain ID
 	mrc	p15, 0, r7, c2, c0, 0	@ translation table base address
-	mrc	p15, 0, r8, c2, c0, 0	@ auxiliary control register
-	mrc	p15, 0, r9, c1, c0, 0	@ control register
+	mrc	p15, 0, r8, c1, c0, 0	@ control register
 
 	stmia	r0, { r4 - r13 }
 
@@ -165,7 +164,6 @@ ENTRY(s3c2410_cpu_resume)
 	mcr	p15, 0, r5, c13, c0, 0		@ PID
 	mcr	p15, 0, r6, c3, c0, 0		@ Domain ID
 	mcr	p15, 0, r7, c2, c0, 0		@ translation table base
-	mcr	p15, 0, r8, c1, c1, 0		@ auxilliary control
 
 #ifdef CONFIG_DEBUG_RESUME
 	mov	r3, #'R'
@@ -173,7 +171,7 @@ ENTRY(s3c2410_cpu_resume)
 #endif
 
 	ldr	r2, =resume_with_mmu
-	mcr	p15, 0, r9, c1, c0, 0		@ turn on MMU, etc
+	mcr	p15, 0, r8, c1, c0, 0		@ turn on MMU, etc
 	nop					@ second-to-last before mmu
 	mov	pc, r2				@ go back to virtual address
 
diff --git a/arch/arm/mach-sa1100/irq.c b/arch/arm/mach-sa1100/irq.c
index c131a5201b5b..b3a56024182e 100644
--- a/arch/arm/mach-sa1100/irq.c
+++ b/arch/arm/mach-sa1100/irq.c
@@ -199,10 +199,26 @@ static void sa1100_unmask_irq(unsigned int irq)
 	ICMR |= (1 << irq);
 }
 
+/*
+ * Apart form GPIOs, only the RTC alarm can be a wakeup event.
+ */
+static int sa1100_set_wake(unsigned int irq, unsigned int on)
+{
+	if (irq == IRQ_RTCAlrm) {
+		if (on)
+			PWER |= PWER_RTC;
+		else
+			PWER &= ~PWER_RTC;
+		return 0;
+	}
+	return -EINVAL;
+}
+
 static struct irqchip sa1100_normal_chip = {
 	.ack		= sa1100_mask_irq,
 	.mask		= sa1100_mask_irq,
 	.unmask		= sa1100_unmask_irq,
+	.set_wake	= sa1100_set_wake,
 };
 
 static struct resource irq_resource = {
diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c
index 25e0ca3e598c..c1f7180c7bed 100644
--- a/arch/arm/mm/ioremap.c
+++ b/arch/arm/mm/ioremap.c
@@ -141,7 +141,7 @@ __ioremap_pfn(unsigned long pfn, unsigned long offset, size_t size,
  		return NULL;
  	addr = (unsigned long)area->addr;
  	if (remap_area_pages(addr, pfn, size, flags)) {
- 		vfree((void *)addr);
+ 		vunmap((void *)addr);
  		return NULL;
  	}
  	return (void __iomem *) (offset + (char *)addr);
@@ -173,7 +173,7 @@ EXPORT_SYMBOL(__ioremap);
 
 void __iounmap(void __iomem *addr)
 {
-	vfree((void *) (PAGE_MASK & (unsigned long) addr));
+	vunmap((void *)(PAGE_MASK & (unsigned long)addr));
 }
 EXPORT_SYMBOL(__iounmap);
 
diff --git a/arch/arm/mm/mm-armv.c b/arch/arm/mm/mm-armv.c
index f14b2d0f3690..95273de4f772 100644
--- a/arch/arm/mm/mm-armv.c
+++ b/arch/arm/mm/mm-armv.c
@@ -376,7 +376,7 @@ void __init build_mem_type_table(void)
 		ecc_mask = 0;
 	}
 
-	if (cpu_arch <= CPU_ARCH_ARMv5TEJ) {
+	if (cpu_arch <= CPU_ARCH_ARMv5TEJ && !cpu_is_xscale()) {
 		for (i = 0; i < ARRAY_SIZE(mem_types); i++) {
 			if (mem_types[i].prot_l1)
 				mem_types[i].prot_l1 |= PMD_BIT4;
@@ -631,7 +631,7 @@ void setup_mm_for_reboot(char mode)
 		pgd = init_mm.pgd;
 
 	base_pmdval = PMD_SECT_AP_WRITE | PMD_SECT_AP_READ | PMD_TYPE_SECT;
-	if (cpu_architecture() <= CPU_ARCH_ARMv5TEJ)
+	if (cpu_architecture() <= CPU_ARCH_ARMv5TEJ && !cpu_is_xscale())
 		base_pmdval |= PMD_BIT4;
 
 	for (i = 0; i < FIRST_USER_PGD_NR + USER_PTRS_PER_PGD; i++, pgd++) {
diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S
index 80873b36c3f7..8d32e21fe151 100644
--- a/arch/arm/mm/proc-xsc3.S
+++ b/arch/arm/mm/proc-xsc3.S
@@ -427,12 +427,13 @@ __xsc3_setup:
 #endif
 	mcr	p15, 0, r0, c1, c0, 1		@ set auxiliary control reg
 	mrc	p15, 0, r0, c1, c0, 0		@ get control register
-	bic	r0, r0, #0x0200			@ .... ..R. .... ....
 	bic	r0, r0, #0x0002			@ .... .... .... ..A.
 	orr	r0, r0, #0x0005			@ .... .... .... .C.M
 #if BTB_ENABLE
+	bic	r0, r0, #0x0200			@ .... ..R. .... ....
 	orr	r0, r0, #0x3900			@ ..VI Z..S .... ....
 #else
+	bic	r0, r0, #0x0a00			@ .... Z.R. .... ....
 	orr	r0, r0, #0x3100			@ ..VI ...S .... ....
 #endif
 #if L2_CACHE_ENABLE
diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
index 8ab5300dcb94..6d7de9c0412f 100644
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@@ -12,7 +12,7 @@
 #
 #   http://www.arm.linux.org.uk/developer/machines/?action=new
 #
-# Last update: Mon Feb 20 10:18:02 2006
+# Last update: Mon May 8 20:11:05 2006
 #
 # machine_is_xxx	CONFIG_xxxx		MACH_TYPE_xxx		number
 #
@@ -566,8 +566,8 @@ switchgrass		MACH_SWITCHGRASS	SWITCHGRASS		549
 ens_cmu			MACH_ENS_CMU		ENS_CMU			550
 mm6_sdb			MACH_MM6_SDB		MM6_SDB			551
 saturn			MACH_SATURN		SATURN			552
-argonplusevb		MACH_ARGONPLUSEVB	ARGONPLUSEVB		553
-scma11evb		MACH_SCMA11EVB		SCMA11EVB		554
+i30030evb		MACH_ARGONPLUSEVB	ARGONPLUSEVB		553
+mxc27530evb		MACH_SCMA11EVB		SCMA11EVB		554
 smdk2800		MACH_SMDK2800		SMDK2800		555
 mtwilson		MACH_MTWILSON		MTWILSON		556
 ziti			MACH_ZITI		ZITI			557
@@ -647,7 +647,7 @@ sendt			MACH_SENDT		SENDT			630
 mx2jazz			MACH_MX2JAZZ		MX2JAZZ			631
 multiio			MACH_MULTIIO		MULTIIO			632
 hrdisplay		MACH_HRDISPLAY		HRDISPLAY		633
-scma11bb		MACH_SCMA11BB		SCMA11BB		634
+mxc27530ads		MACH_SCMA11BB		SCMA11BB		634
 trizeps3		MACH_TRIZEPS3		TRIZEPS3		635
 zefeerdza		MACH_ZEFEERDZA		ZEFEERDZA		636
 zefeerdzb		MACH_ZEFEERDZB		ZEFEERDZB		637
@@ -721,7 +721,7 @@ gp32			MACH_GP32		GP32			706
 gem			MACH_GEM		GEM			707
 i858			MACH_I858		I858			708
 hx2750			MACH_HX2750		HX2750			709
-zeusevb			MACH_ZEUSEVB		ZEUSEVB			710
+mxc91131evb		MACH_ZEUSEVB		ZEUSEVB			710
 p700			MACH_P700		P700			711
 cpe			MACH_CPE		CPE			712
 spitz			MACH_SPITZ		SPITZ			713
@@ -802,7 +802,7 @@ cpuat91			MACH_CPUAT91		CPUAT91			787
 rea9200			MACH_REA9200		REA9200			788
 acts_pune_sa1110	MACH_ACTS_PUNE_SA1110	ACTS_PUNE_SA1110	789
 ixp425			MACH_IXP425		IXP425			790
-argonplusodyssey	MACH_ARGONPLUSODYSSEY	ARGONPLUSODYSSEY	791
+i30030ads		MACH_ARGONPLUSODYSSEY	ARGONPLUSODYSSEY	791
 perch			MACH_PERCH		PERCH			792
 eis05r1			MACH_EIS05R1		EIS05R1			793
 pepperpad		MACH_PEPPERPAD		PEPPERPAD		794
@@ -827,7 +827,7 @@ micro9l			MACH_MICRO9L		MICRO9L			812
 uc5471dsp		MACH_UC5471DSP		UC5471DSP		813
 sj5471eng		MACH_SJ5471ENG		SJ5471ENG		814
 none			MACH_CMPXA26X		CMPXA26X		815
-nc			MACH_NC			NC			816
+nc1			MACH_NC			NC			816
 omap_palmte		MACH_OMAP_PALMTE	OMAP_PALMTE		817
 ajax52x			MACH_AJAX52X		AJAX52X			818
 siriustar		MACH_SIRIUSTAR		SIRIUSTAR		819
@@ -930,7 +930,7 @@ netclient		MACH_NETCLIENT		NETCLIENT		916
 xscale_palmtt5		MACH_XSCALE_PALMTT5	XSCALE_PALMTT5		917
 xscale_palmtc		MACH_OMAP_PALMTC	OMAP_PALMTC		918
 omap_apollon		MACH_OMAP_APOLLON	OMAP_APOLLON		919
-argonlvevb		MACH_ARGONLVEVB		ARGONLVEVB		920
+mxc30030evb		MACH_ARGONLVEVB		ARGONLVEVB		920
 rea_2d			MACH_REA_2D		REA_2D			921
 eti3e524		MACH_TI3E524		TI3E524			922
 ateb9200		MACH_ATEB9200		ATEB9200		923
@@ -965,7 +965,78 @@ sisteron		MACH_SISTERON		SISTERON		951
 rx1950			MACH_RX1950		RX1950			952
 tsc_venus		MACH_TSC_VENUS		TSC_VENUS		953
 ds101j			MACH_DS101J		DS101J			954
-mxc300_30ads		MACH_MXC30030ADS	MXC30030ADS		955
+mxc30030ads		MACH_MXC30030ADS	MXC30030ADS		955
 fujitsu_wimaxsoc	MACH_FUJITSU_WIMAXSOC	FUJITSU_WIMAXSOC	956
 dualpcmodem		MACH_DUALPCMODEM	DUALPCMODEM		957
 gesbc9312		MACH_GESBC9312		GESBC9312		958
+htcapache		MACH_HTCAPACHE		HTCAPACHE		959
+ixdp435			MACH_IXDP435		IXDP435			960
+catprovt100		MACH_CATPROVT100	CATPROVT100		961
+picotux1xx		MACH_PICOTUX1XX		PICOTUX1XX		962
+picotux2xx		MACH_PICOTUX2XX		PICOTUX2XX		963
+dsmg600			MACH_DSMG600		DSMG600			964
+empc2			MACH_EMPC2		EMPC2			965
+ventura			MACH_VENTURA		VENTURA			966
+phidget_sbc		MACH_PHIDGET_SBC	PHIDGET_SBC		967
+ij3k			MACH_IJ3K		IJ3K			968
+pisgah			MACH_PISGAH		PISGAH			969
+omap_fsample		MACH_OMAP_FSAMPLE	OMAP_FSAMPLE		970
+sg720			MACH_SG720		SG720			971
+redfox			MACH_REDFOX		REDFOX			972
+mysh_ep9315_1		MACH_MYSH_EP9315_1	MYSH_EP9315_1		973
+tpf106			MACH_TPF106		TPF106			974
+at91rm9200kg		MACH_AT91RM9200KG	AT91RM9200KG		975
+racemt2			MACH_SLEDB		SLEDB			976
+ontrack			MACH_ONTRACK		ONTRACK			977
+pm1200			MACH_PM1200		PM1200			978
+ess24562		MACH_ESS24XXX		ESS24XXX		979
+coremp7			MACH_COREMP7		COREMP7			980
+nexcoder_6446		MACH_NEXCODER_6446	NEXCODER_6446		981
+stvc8380		MACH_STVC8380		STVC8380		982
+teklynx			MACH_TEKLYNX		TEKLYNX			983
+carbonado		MACH_CARBONADO		CARBONADO		984
+sysmos_mp730		MACH_SYSMOS_MP730	SYSMOS_MP730		985
+snapper_cl15		MACH_SNAPPER_CL15	SNAPPER_CL15		986
+pgigim			MACH_PGIGIM		PGIGIM			987
+ptx9160p2		MACH_PTX9160P2		PTX9160P2		988
+dcore1			MACH_DCORE1		DCORE1			989
+victorpxa		MACH_VICTORPXA		VICTORPXA		990
+mx2dtb			MACH_MX2DTB		MX2DTB			991
+pxa_irex_er0100		MACH_PXA_IREX_ER0100	PXA_IREX_ER0100		992
+omap_palmz71		MACH_OMAP_PALMZ71	OMAP_PALMZ71		993
+bartec_deg		MACH_BARTEC_DEG		BARTEC_DEG		994
+hw50251			MACH_HW50251		HW50251			995
+ibox			MACH_IBOX		IBOX			996
+atlaslh7a404		MACH_ATLASLH7A404	ATLASLH7A404		997
+pt2026			MACH_PT2026		PT2026			998
+htcalpine		MACH_HTCALPINE		HTCALPINE		999
+bartec_vtu		MACH_BARTEC_VTU		BARTEC_VTU		1000
+vcoreii			MACH_VCOREII		VCOREII			1001
+pdnb3			MACH_PDNB3		PDNB3			1002
+htcbeetles		MACH_HTCBEETLES		HTCBEETLES		1003
+s3c6400			MACH_S3C6400		S3C6400			1004
+s3c2443			MACH_S3C2443		S3C2443			1005
+omap_ldk		MACH_OMAP_LDK		OMAP_LDK		1006
+smdk2460		MACH_SMDK2460		SMDK2460		1007
+smdk2440		MACH_SMDK2440		SMDK2440		1008
+smdk2412		MACH_SMDK2412		SMDK2412		1009
+webbox			MACH_WEBBOX		WEBBOX			1010
+cwwndp			MACH_CWWNDP		CWWNDP			1011
+dragon			MACH_DRAGON		DRAGON			1012
+opendo_cpu_board	MACH_OPENDO_CPU_BOARD	OPENDO_CPU_BOARD	1013
+ccm2200			MACH_CCM2200		CCM2200			1014
+etwarm			MACH_ETWARM		ETWARM			1015
+m93030			MACH_M93030		M93030			1016
+cc7u			MACH_CC7U		CC7U			1017
+mtt_ranger		MACH_MTT_RANGER		MTT_RANGER		1018
+nexus			MACH_NEXUS		NEXUS			1019
+desman			MACH_DESMAN		DESMAN			1020
+bkde303			MACH_BKDE303		BKDE303			1021
+smdk2413		MACH_SMDK2413		SMDK2413		1022
+aml_m7200		MACH_AML_M7200		AML_M7200		1023
+aml_m5900		MACH_AML_M5900		AML_M5900		1024
+sg640			MACH_SG640		SG640			1025
+edg79524		MACH_EDG79524		EDG79524		1026
+ai2410			MACH_AI2410		AI2410			1027
+ixp465			MACH_IXP465		IXP465			1028
+balloon3		MACH_BALLOON3		BALLOON3		1029
diff --git a/arch/arm/vfp/vfpdouble.c b/arch/arm/vfp/vfpdouble.c
index febd115dba28..009038c8113e 100644
--- a/arch/arm/vfp/vfpdouble.c
+++ b/arch/arm/vfp/vfpdouble.c
@@ -197,7 +197,7 @@ u32 vfp_double_normaliseround(int dd, struct vfp_double *vd, u32 fpscr, u32 exce
 			 dd, d, exceptions);
 		vfp_put_double(dd, d);
 	}
-	return exceptions & ~VFP_NAN_FLAG;
+	return exceptions;
 }
 
 /*
diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c
index 22f3da4e0829..03486be04193 100644
--- a/arch/arm/vfp/vfpmodule.c
+++ b/arch/arm/vfp/vfpmodule.c
@@ -180,7 +180,7 @@ static u32 vfp_emulate_instruction(u32 inst, u32 fpscr, struct pt_regs *regs)
 		 * emulate it.
 		 */
 	}
-	return exceptions;
+	return exceptions & ~VFP_NAN_FLAG;
 }
 
 /*
@@ -245,7 +245,7 @@ void VFP9_bounce(u32 trigger, u32 fpexc, struct pt_regs *regs)
 	 */
 	barrier();
 	trigger = fmrx(FPINST2);
-	fpscr = fmrx(FPSCR);
+	orig_fpscr = fpscr = fmrx(FPSCR);
 
  emulate:
 	exceptions = vfp_emulate_instruction(trigger, fpscr, regs);
diff --git a/arch/arm/vfp/vfpsingle.c b/arch/arm/vfp/vfpsingle.c
index 4ac27f193934..dae2c2f46052 100644
--- a/arch/arm/vfp/vfpsingle.c
+++ b/arch/arm/vfp/vfpsingle.c
@@ -203,7 +203,7 @@ u32 vfp_single_normaliseround(int sd, struct vfp_single *vs, u32 fpscr, u32 exce
 		vfp_put_float(sd, d);
 	}
 
-	return exceptions & ~VFP_NAN_FLAG;
+	return exceptions;
 }
 
 /*
diff --git a/arch/i386/Kconfig b/arch/i386/Kconfig
index 18ec9fe6deb6..8dfa3054f10f 100644
--- a/arch/i386/Kconfig
+++ b/arch/i386/Kconfig
@@ -467,7 +467,7 @@ endchoice
 
 choice
 	depends on EXPERIMENTAL && !X86_PAE
-	prompt "Memory split"
+	prompt "Memory split" if EMBEDDED
 	default VMSPLIT_3G
 	help
 	  Select the desired split between kernel and user memory.
@@ -756,12 +756,12 @@ config PHYSICAL_START
 
 config HOTPLUG_CPU
 	bool "Support for hot-pluggable CPUs (EXPERIMENTAL)"
-	depends on SMP && HOTPLUG && EXPERIMENTAL && !X86_VOYAGER && !X86_PC
+	depends on SMP && HOTPLUG && EXPERIMENTAL && !X86_VOYAGER
 	---help---
-	  Say Y here to experiment with turning CPUs off and on.  CPUs
-	  can be controlled through /sys/devices/system/cpu.
+	  Say Y here to experiment with turning CPUs off and on, and to
+	  enable suspend on SMP systems. CPUs can be controlled through
+	  /sys/devices/system/cpu.
 
-	  Say N.
 
 endmenu
 
diff --git a/arch/i386/Kconfig.debug b/arch/i386/Kconfig.debug
index 6e97df6979e8..c92191b1fb67 100644
--- a/arch/i386/Kconfig.debug
+++ b/arch/i386/Kconfig.debug
@@ -81,4 +81,13 @@ config X86_MPPARSE
 	depends on X86_LOCAL_APIC && !X86_VISWS
 	default y
 
+config DOUBLEFAULT
+	default y
+	bool "Enable doublefault exception handler" if EMBEDDED
+	help
+          This option allows trapping of rare doublefault exceptions that
+          would otherwise cause a system to silently reboot. Disabling this
+          option saves about 4k and might cause you much additional grey
+          hair.
+
 endmenu
diff --git a/arch/i386/kernel/Makefile b/arch/i386/kernel/Makefile
index 5b9ed21216cf..96fb8a020af2 100644
--- a/arch/i386/kernel/Makefile
+++ b/arch/i386/kernel/Makefile
@@ -6,7 +6,7 @@ extra-y := head.o init_task.o vmlinux.lds
 
 obj-y	:= process.o semaphore.o signal.o entry.o traps.o irq.o \
 		ptrace.o time.o ioport.o ldt.o setup.o i8259.o sys_i386.o \
-		pci-dma.o i386_ksyms.o i387.o dmi_scan.o bootflag.o \
+		pci-dma.o i386_ksyms.o i387.o bootflag.o \
 		quirks.o i8237.o topology.o alternative.o
 
 obj-y				+= cpu/
diff --git a/arch/i386/kernel/acpi/boot.c b/arch/i386/kernel/acpi/boot.c
index 030a0007a4e0..40e5aba3ad3d 100644
--- a/arch/i386/kernel/acpi/boot.c
+++ b/arch/i386/kernel/acpi/boot.c
@@ -168,7 +168,7 @@ int __init acpi_parse_mcfg(unsigned long phys_addr, unsigned long size)
 	unsigned long i;
 	int config_size;
 
-	if (!phys_addr || !size || !cpu_has_apic)
+	if (!phys_addr || !size)
 		return -EINVAL;
 
 	mcfg = (struct acpi_table_mcfg *)__acpi_map_table(phys_addr, size);
@@ -215,7 +215,7 @@ static int __init acpi_parse_madt(unsigned long phys_addr, unsigned long size)
 {
 	struct acpi_table_madt *madt = NULL;
 
-	if (!phys_addr || !size || !cpu_has_apic)
+	if (!phys_addr || !size)
 		return -EINVAL;
 
 	madt = (struct acpi_table_madt *)__acpi_map_table(phys_addr, size);
diff --git a/arch/i386/kernel/acpi/earlyquirk.c b/arch/i386/kernel/acpi/earlyquirk.c
index 2e3b643a4dc4..1649a175a206 100644
--- a/arch/i386/kernel/acpi/earlyquirk.c
+++ b/arch/i386/kernel/acpi/earlyquirk.c
@@ -5,17 +5,34 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/pci.h>
+#include <linux/acpi.h>
+
 #include <asm/pci-direct.h>
 #include <asm/acpi.h>
 #include <asm/apic.h>
 
+#ifdef CONFIG_ACPI
+
+static int nvidia_hpet_detected __initdata;
+
+static int __init nvidia_hpet_check(unsigned long phys, unsigned long size)
+{
+	nvidia_hpet_detected = 1;
+	return 0;
+}
+#endif
+
 static int __init check_bridge(int vendor, int device)
 {
 #ifdef CONFIG_ACPI
-	/* According to Nvidia all timer overrides are bogus. Just ignore
-	   them all. */
+	/* According to Nvidia all timer overrides are bogus unless HPET
+	   is enabled. */
 	if (vendor == PCI_VENDOR_ID_NVIDIA) {
-		acpi_skip_timer_override = 1;
+		nvidia_hpet_detected = 0;
+		acpi_table_parse(ACPI_HPET, nvidia_hpet_check);
+		if (nvidia_hpet_detected == 0) {
+			acpi_skip_timer_override = 1;
+		}
 	}
 #endif
 	if (vendor == PCI_VENDOR_ID_ATI && timer_over_8254 == 1) {
diff --git a/arch/i386/kernel/apic.c b/arch/i386/kernel/apic.c
index 254cee9f0b7b..3d4b2f3d116a 100644
--- a/arch/i386/kernel/apic.c
+++ b/arch/i386/kernel/apic.c
@@ -757,10 +757,6 @@ static int __init apic_set_verbosity(char *str)
 		apic_verbosity = APIC_DEBUG;
 	else if (strcmp("verbose", str) == 0)
 		apic_verbosity = APIC_VERBOSE;
-	else
-		printk(KERN_WARNING "APIC Verbosity level %s not recognised"
-				" use apic=verbose or apic=debug\n", str);
-
 	return 1;
 }
 
@@ -1345,6 +1341,14 @@ int __init APIC_init_uniprocessor (void)
 
 	connect_bsp_APIC();
 
+	/*
+	 * Hack: In case of kdump, after a crash, kernel might be booting
+	 * on a cpu with non-zero lapic id. But boot_cpu_physical_apicid
+	 * might be zero if read from MP tables. Get it from LAPIC.
+	 */
+#ifdef CONFIG_CRASH_DUMP
+	boot_cpu_physical_apicid = GET_APIC_ID(apic_read(APIC_ID));
+#endif
 	phys_cpu_present_map = physid_mask_of_physid(boot_cpu_physical_apicid);
 
 	setup_local_APIC();
diff --git a/arch/i386/kernel/apm.c b/arch/i386/kernel/apm.c
index da30a374dd4e..df0e1745f189 100644
--- a/arch/i386/kernel/apm.c
+++ b/arch/i386/kernel/apm.c
@@ -1079,7 +1079,7 @@ static int apm_console_blank(int blank)
 			break;
 	}
 
-	if (error == APM_NOT_ENGAGED && state != APM_STATE_READY) {
+	if (error == APM_NOT_ENGAGED) {
 		static int tried;
 		int eng_error;
 		if (tried++ == 0) {
diff --git a/arch/i386/kernel/cpu/amd.c b/arch/i386/kernel/cpu/amd.c
index ff2b2154ac1b..786d1a57048b 100644
--- a/arch/i386/kernel/cpu/amd.c
+++ b/arch/i386/kernel/cpu/amd.c
@@ -207,6 +207,8 @@ static void __init init_amd(struct cpuinfo_x86 *c)
 		set_bit(X86_FEATURE_K7, c->x86_capability); 
 		break;
 	}
+	if (c->x86 >= 6)
+		set_bit(X86_FEATURE_FXSAVE_LEAK, c->x86_capability);
 
 	display_cacheinfo(c);
 
diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k8.c b/arch/i386/kernel/cpu/cpufreq/powernow-k8.c
index 7c0e160a2145..71fffa174425 100644
--- a/arch/i386/kernel/cpu/cpufreq/powernow-k8.c
+++ b/arch/i386/kernel/cpu/cpufreq/powernow-k8.c
@@ -905,14 +905,17 @@ static int powernowk8_target(struct cpufreq_policy *pol, unsigned targfreq, unsi
 {
 	cpumask_t oldmask = CPU_MASK_ALL;
 	struct powernow_k8_data *data = powernow_data[pol->cpu];
-	u32 checkfid = data->currfid;
-	u32 checkvid = data->currvid;
+	u32 checkfid;
+	u32 checkvid;
 	unsigned int newstate;
 	int ret = -EIO;
 
 	if (!data)
 		return -EINVAL;
 
+	checkfid = data->currfid;
+	checkvid = data->currvid;
+
 	/* only run on specific CPU from here on */
 	oldmask = current->cpus_allowed;
 	set_cpus_allowed(current, cpumask_of_cpu(pol->cpu));
@@ -1109,9 +1112,6 @@ static unsigned int powernowk8_get (unsigned int cpu)
 	if (!data)
 		return -EINVAL;
 
-	if (!data)
-		return -EINVAL;
-
 	set_cpus_allowed(current, cpumask_of_cpu(cpu));
 	if (smp_processor_id() != cpu) {
 		printk(KERN_ERR PFX "limiting to CPU %d failed in powernowk8_get\n", cpu);
diff --git a/arch/i386/kernel/cpu/intel_cacheinfo.c b/arch/i386/kernel/cpu/intel_cacheinfo.c
index 9df87b03612c..c8547a6fa7e6 100644
--- a/arch/i386/kernel/cpu/intel_cacheinfo.c
+++ b/arch/i386/kernel/cpu/intel_cacheinfo.c
@@ -642,7 +642,7 @@ static void __cpuexit cache_remove_dev(struct sys_device * sys_dev)
 	return;
 }
 
-static int __cpuinit cacheinfo_cpu_callback(struct notifier_block *nfb,
+static int cacheinfo_cpu_callback(struct notifier_block *nfb,
 					unsigned long action, void *hcpu)
 {
 	unsigned int cpu = (unsigned long)hcpu;
diff --git a/arch/i386/kernel/cpuid.c b/arch/i386/kernel/cpuid.c
index 006141d1c12a..1d9a4abcdfc7 100644
--- a/arch/i386/kernel/cpuid.c
+++ b/arch/i386/kernel/cpuid.c
@@ -168,7 +168,7 @@ static int cpuid_class_device_create(int i)
 	return err;
 }
 
-static int __devinit cpuid_class_cpu_callback(struct notifier_block *nfb, unsigned long action, void *hcpu)
+static int cpuid_class_cpu_callback(struct notifier_block *nfb, unsigned long action, void *hcpu)
 {
 	unsigned int cpu = (unsigned long)hcpu;
 
diff --git a/arch/i386/kernel/io_apic.c b/arch/i386/kernel/io_apic.c
index f8f132aa5472..d70f2ade5cde 100644
--- a/arch/i386/kernel/io_apic.c
+++ b/arch/i386/kernel/io_apic.c
@@ -2238,6 +2238,8 @@ static inline void unlock_ExtINT_logic(void)
 	spin_unlock_irqrestore(&ioapic_lock, flags);
 }
 
+int timer_uses_ioapic_pin_0;
+
 /*
  * This code may look a bit paranoid, but it's supposed to cooperate with
  * a wide range of boards and BIOS bugs.  Fortunately only the timer IRQ
@@ -2274,6 +2276,9 @@ static inline void check_timer(void)
 	pin2  = ioapic_i8259.pin;
 	apic2 = ioapic_i8259.apic;
 
+	if (pin1 == 0)
+		timer_uses_ioapic_pin_0 = 1;
+
 	printk(KERN_INFO "..TIMER: vector=0x%02X apic1=%d pin1=%d apic2=%d pin2=%d\n",
 		vector, apic1, pin1, apic2, pin2);
 
diff --git a/arch/i386/kernel/kprobes.c b/arch/i386/kernel/kprobes.c
index f19768789e8a..38806f427849 100644
--- a/arch/i386/kernel/kprobes.c
+++ b/arch/i386/kernel/kprobes.c
@@ -43,7 +43,7 @@ DEFINE_PER_CPU(struct kprobe *, current_kprobe) = NULL;
 DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk);
 
 /* insert a jmp code */
-static inline void set_jmp_op(void *from, void *to)
+static __always_inline void set_jmp_op(void *from, void *to)
 {
 	struct __arch_jmp_op {
 		char op;
@@ -57,7 +57,7 @@ static inline void set_jmp_op(void *from, void *to)
 /*
  * returns non-zero if opcodes can be boosted.
  */
-static inline int can_boost(kprobe_opcode_t opcode)
+static __always_inline int can_boost(kprobe_opcode_t opcode)
 {
 	switch (opcode & 0xf0 ) {
 	case 0x70:
@@ -88,7 +88,7 @@ static inline int can_boost(kprobe_opcode_t opcode)
 /*
  * returns non-zero if opcode modifies the interrupt flag.
  */
-static inline int is_IF_modifier(kprobe_opcode_t opcode)
+static int __kprobes is_IF_modifier(kprobe_opcode_t opcode)
 {
 	switch (opcode) {
 	case 0xfa:		/* cli */
@@ -138,7 +138,7 @@ void __kprobes arch_remove_kprobe(struct kprobe *p)
 	mutex_unlock(&kprobe_mutex);
 }
 
-static inline void save_previous_kprobe(struct kprobe_ctlblk *kcb)
+static void __kprobes save_previous_kprobe(struct kprobe_ctlblk *kcb)
 {
 	kcb->prev_kprobe.kp = kprobe_running();
 	kcb->prev_kprobe.status = kcb->kprobe_status;
@@ -146,7 +146,7 @@ static inline void save_previous_kprobe(struct kprobe_ctlblk *kcb)
 	kcb->prev_kprobe.saved_eflags = kcb->kprobe_saved_eflags;
 }
 
-static inline void restore_previous_kprobe(struct kprobe_ctlblk *kcb)
+static void __kprobes restore_previous_kprobe(struct kprobe_ctlblk *kcb)
 {
 	__get_cpu_var(current_kprobe) = kcb->prev_kprobe.kp;
 	kcb->kprobe_status = kcb->prev_kprobe.status;
@@ -154,7 +154,7 @@ static inline void restore_previous_kprobe(struct kprobe_ctlblk *kcb)
 	kcb->kprobe_saved_eflags = kcb->prev_kprobe.saved_eflags;
 }
 
-static inline void set_current_kprobe(struct kprobe *p, struct pt_regs *regs,
+static void __kprobes set_current_kprobe(struct kprobe *p, struct pt_regs *regs,
 				struct kprobe_ctlblk *kcb)
 {
 	__get_cpu_var(current_kprobe) = p;
@@ -164,7 +164,7 @@ static inline void set_current_kprobe(struct kprobe *p, struct pt_regs *regs,
 		kcb->kprobe_saved_eflags &= ~IF_MASK;
 }
 
-static inline void prepare_singlestep(struct kprobe *p, struct pt_regs *regs)
+static void __kprobes prepare_singlestep(struct kprobe *p, struct pt_regs *regs)
 {
 	regs->eflags |= TF_MASK;
 	regs->eflags &= ~IF_MASK;
@@ -242,10 +242,6 @@ static int __kprobes kprobe_handler(struct pt_regs *regs)
 			kcb->kprobe_status = KPROBE_REENTER;
 			return 1;
 		} else {
-			if (regs->eflags & VM_MASK) {
-			/* We are in virtual-8086 mode. Return 0 */
-				goto no_kprobe;
-			}
 			if (*addr != BREAKPOINT_INSTRUCTION) {
 			/* The breakpoint instruction was removed by
 			 * another cpu right after we hit, no further
@@ -265,11 +261,6 @@ static int __kprobes kprobe_handler(struct pt_regs *regs)
 
 	p = get_kprobe(addr);
 	if (!p) {
-		if (regs->eflags & VM_MASK) {
-			/* We are in virtual-8086 mode. Return 0 */
-			goto no_kprobe;
-		}
-
 		if (*addr != BREAKPOINT_INSTRUCTION) {
 			/*
 			 * The breakpoint instruction was removed right
@@ -452,10 +443,11 @@ static void __kprobes resume_execution(struct kprobe *p,
 		*tos &= ~(TF_MASK | IF_MASK);
 		*tos |= kcb->kprobe_old_eflags;
 		break;
-	case 0xc3:		/* ret/lret */
-	case 0xcb:
-	case 0xc2:
+	case 0xc2:		/* iret/ret/lret */
+	case 0xc3:
 	case 0xca:
+	case 0xcb:
+	case 0xcf:
 	case 0xea:		/* jmp absolute -- eip is correct */
 		/* eip is already adjusted, no more changes required */
 		p->ainsn.boostable = 1;
@@ -463,10 +455,13 @@ static void __kprobes resume_execution(struct kprobe *p,
 	case 0xe8:		/* call relative - Fix return addr */
 		*tos = orig_eip + (*tos - copy_eip);
 		break;
+	case 0x9a:		/* call absolute -- same as call absolute, indirect */
+		*tos = orig_eip + (*tos - copy_eip);
+		goto no_change;
 	case 0xff:
 		if ((p->ainsn.insn[1] & 0x30) == 0x10) {
-			/* call absolute, indirect */
 			/*
+			 * call absolute, indirect
 			 * Fix return addr; eip is correct.
 			 * But this is not boostable
 			 */
@@ -507,7 +502,7 @@ no_change:
  * Interrupts are disabled on entry as trap1 is an interrupt gate and they
  * remain disabled thoroughout this function.
  */
-static inline int post_kprobe_handler(struct pt_regs *regs)
+static int __kprobes post_kprobe_handler(struct pt_regs *regs)
 {
 	struct kprobe *cur = kprobe_running();
 	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
@@ -543,7 +538,7 @@ out:
 	return 1;
 }
 
-static inline int kprobe_fault_handler(struct pt_regs *regs, int trapnr)
+static int __kprobes kprobe_fault_handler(struct pt_regs *regs, int trapnr)
 {
 	struct kprobe *cur = kprobe_running();
 	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
diff --git a/arch/i386/kernel/mpparse.c b/arch/i386/kernel/mpparse.c
index 34d21e21e012..6b1392d33ed5 100644
--- a/arch/i386/kernel/mpparse.c
+++ b/arch/i386/kernel/mpparse.c
@@ -1130,7 +1130,17 @@ int mp_register_gsi (u32 gsi, int triggering, int polarity)
 		 */
 		int irq = gsi;
 		if (gsi < MAX_GSI_NUM) {
-			if (gsi > 15)
+			/*
+			 * Retain the VIA chipset work-around (gsi > 15), but
+			 * avoid a problem where the 8254 timer (IRQ0) is setup
+			 * via an override (so it's not on pin 0 of the ioapic),
+			 * and at the same time, the pin 0 interrupt is a PCI
+			 * type.  The gsi > 15 test could cause these two pins
+			 * to be shared as IRQ0, and they are not shareable.
+			 * So test for this condition, and if necessary, avoid
+			 * the pin collision.
+			 */
+			if (gsi > 15 || (gsi == 0 && !timer_uses_ioapic_pin_0))
 				gsi = pci_irq++;
 			/*
 			 * Don't assign IRQ used by ACPI SCI
diff --git a/arch/i386/kernel/msr.c b/arch/i386/kernel/msr.c
index 1d0a55e68760..7a328230e540 100644
--- a/arch/i386/kernel/msr.c
+++ b/arch/i386/kernel/msr.c
@@ -251,7 +251,7 @@ static int msr_class_device_create(int i)
 	return err;
 }
 
-static int __devinit msr_class_cpu_callback(struct notifier_block *nfb, unsigned long action, void *hcpu)
+static int msr_class_cpu_callback(struct notifier_block *nfb, unsigned long action, void *hcpu)
 {
 	unsigned int cpu = (unsigned long)hcpu;
 
diff --git a/arch/i386/kernel/ptrace.c b/arch/i386/kernel/ptrace.c
index 506462ef36a0..fd7eaf7866e0 100644
--- a/arch/i386/kernel/ptrace.c
+++ b/arch/i386/kernel/ptrace.c
@@ -671,7 +671,7 @@ int do_syscall_trace(struct pt_regs *regs, int entryexit)
 
 	if (unlikely(current->audit_context)) {
 		if (entryexit)
-			audit_syscall_exit(current, AUDITSC_RESULT(regs->eax),
+			audit_syscall_exit(AUDITSC_RESULT(regs->eax),
 						regs->eax);
 		/* Debug traps, when using PTRACE_SINGLESTEP, must be sent only
 		 * on the syscall exit path. Normally, when TIF_SYSCALL_AUDIT is
@@ -720,14 +720,13 @@ int do_syscall_trace(struct pt_regs *regs, int entryexit)
 	ret = is_sysemu;
 out:
 	if (unlikely(current->audit_context) && !entryexit)
-		audit_syscall_entry(current, AUDIT_ARCH_I386, regs->orig_eax,
+		audit_syscall_entry(AUDIT_ARCH_I386, regs->orig_eax,
 				    regs->ebx, regs->ecx, regs->edx, regs->esi);
 	if (ret == 0)
 		return 0;
 
 	regs->orig_eax = -1; /* force skip of syscall restarting */
 	if (unlikely(current->audit_context))
-		audit_syscall_exit(current, AUDITSC_RESULT(regs->eax),
-				regs->eax);
+		audit_syscall_exit(AUDITSC_RESULT(regs->eax), regs->eax);
 	return 1;
 }
diff --git a/arch/i386/kernel/setup.c b/arch/i386/kernel/setup.c
index 80cb3b2d0997..dd6b0e3386ce 100644
--- a/arch/i386/kernel/setup.c
+++ b/arch/i386/kernel/setup.c
@@ -970,8 +970,10 @@ efi_memory_present_wrapper(unsigned long start, unsigned long end, void *arg)
   * not-overlapping, which is the case
   */
 int __init
-e820_all_mapped(unsigned long start, unsigned long end, unsigned type)
+e820_all_mapped(unsigned long s, unsigned long e, unsigned type)
 {
+	u64 start = s;
+	u64 end = e;
 	int i;
 	for (i = 0; i < e820.nr_map; i++) {
 		struct e820entry *ei = &e820.map[i];
@@ -1318,6 +1320,8 @@ legacy_init_iomem_resources(struct resource *code_resource, struct resource *dat
 	probe_roms();
 	for (i = 0; i < e820.nr_map; i++) {
 		struct resource *res;
+		if (e820.map[i].addr + e820.map[i].size > 0x100000000ULL)
+			continue;
 		res = kzalloc(sizeof(struct resource), GFP_ATOMIC);
 		switch (e820.map[i].type) {
 		case E820_RAM:	res->name = "System RAM"; break;
@@ -1543,15 +1547,18 @@ void __init setup_arch(char **cmdline_p)
 	if (efi_enabled)
 		efi_map_memmap();
 
-#ifdef CONFIG_X86_IO_APIC
-	check_acpi_pci();	/* Checks more than just ACPI actually */
-#endif
-
 #ifdef CONFIG_ACPI
 	/*
 	 * Parse the ACPI tables for possible boot-time SMP configuration.
 	 */
 	acpi_boot_table_init();
+#endif
+
+#ifdef CONFIG_X86_IO_APIC
+	check_acpi_pci();	/* Checks more than just ACPI actually */
+#endif
+
+#ifdef CONFIG_ACPI
 	acpi_boot_init();
 
 #if defined(CONFIG_SMP) && defined(CONFIG_X86_PC)
diff --git a/arch/i386/kernel/smpboot.c b/arch/i386/kernel/smpboot.c
index a6969903f2d6..825b2b4ca721 100644
--- a/arch/i386/kernel/smpboot.c
+++ b/arch/i386/kernel/smpboot.c
@@ -313,7 +313,9 @@ static void __init synchronize_tsc_bp (void)
 			if (tsc_values[i] < avg)
 				realdelta = -realdelta;
 
-			printk(KERN_INFO "CPU#%d had %ld usecs TSC skew, fixed it up.\n", i, realdelta);
+			if (realdelta > 0)
+				printk(KERN_INFO "CPU#%d had %ld usecs TSC "
+					"skew, fixed it up.\n", i, realdelta);
 		}
 
 		sum += delta;
diff --git a/arch/i386/kernel/syscall_table.S b/arch/i386/kernel/syscall_table.S
index 4f58b9c0efe3..af56987f69b0 100644
--- a/arch/i386/kernel/syscall_table.S
+++ b/arch/i386/kernel/syscall_table.S
@@ -314,3 +314,5 @@ ENTRY(sys_call_table)
 	.long sys_get_robust_list
 	.long sys_splice
 	.long sys_sync_file_range
+	.long sys_tee			/* 315 */
+	.long sys_vmsplice
diff --git a/arch/i386/kernel/timers/timer_tsc.c b/arch/i386/kernel/timers/timer_tsc.c
index 5e41ee29c8cf..f1187ddb0d0f 100644
--- a/arch/i386/kernel/timers/timer_tsc.c
+++ b/arch/i386/kernel/timers/timer_tsc.c
@@ -279,7 +279,7 @@ time_cpufreq_notifier(struct notifier_block *nb, unsigned long val,
 {
 	struct cpufreq_freqs *freq = data;
 
-	if (val != CPUFREQ_RESUMECHANGE)
+	if (val != CPUFREQ_RESUMECHANGE && val != CPUFREQ_SUSPENDCHANGE)
 		write_seqlock_irq(&xtime_lock);
 	if (!ref_freq) {
 		if (!freq->old){
@@ -312,7 +312,7 @@ time_cpufreq_notifier(struct notifier_block *nb, unsigned long val,
 	}
 
 end:
-	if (val != CPUFREQ_RESUMECHANGE)
+	if (val != CPUFREQ_RESUMECHANGE && val != CPUFREQ_SUSPENDCHANGE)
 		write_sequnlock_irq(&xtime_lock);
 
 	return 0;
diff --git a/arch/i386/kernel/traps.c b/arch/i386/kernel/traps.c
index 2d22f5761b1d..0e498369f35e 100644
--- a/arch/i386/kernel/traps.c
+++ b/arch/i386/kernel/traps.c
@@ -130,9 +130,8 @@ static inline int print_addr_and_symbol(unsigned long addr, char *log_lvl,
 	print_symbol("%s", addr);
 
 	printed = (printed + 1) % CONFIG_STACK_BACKTRACE_COLS;
-
 	if (printed)
-		printk("  ");
+		printk(" ");
 	else
 		printk("\n");
 
@@ -212,7 +211,6 @@ static void show_stack_log_lvl(struct task_struct *task, unsigned long *esp,
 	}
 
 	stack = esp;
-	printk(log_lvl);
 	for(i = 0; i < kstack_depth_to_print; i++) {
 		if (kstack_end(stack))
 			break;
diff --git a/arch/i386/kernel/vm86.c b/arch/i386/kernel/vm86.c
index aee14fafd13d..00e0118e717c 100644
--- a/arch/i386/kernel/vm86.c
+++ b/arch/i386/kernel/vm86.c
@@ -312,7 +312,7 @@ static void do_sys_vm86(struct kernel_vm86_struct *info, struct task_struct *tsk
 
 	/*call audit_syscall_exit since we do not exit via the normal paths */
 	if (unlikely(current->audit_context))
-		audit_syscall_exit(current, AUDITSC_RESULT(eax), eax);
+		audit_syscall_exit(AUDITSC_RESULT(eax), eax);
 
 	__asm__ __volatile__(
 		"movl %0,%%esp\n\t"
diff --git a/arch/i386/mach-generic/probe.c b/arch/i386/mach-generic/probe.c
index cea5b3ce4b57..d55fa7b187ab 100644
--- a/arch/i386/mach-generic/probe.c
+++ b/arch/i386/mach-generic/probe.c
@@ -93,9 +93,11 @@ int __init mps_oem_check(struct mp_config_table *mpc, char *oem, char *productid
 	int i;
 	for (i = 0; apic_probe[i]; ++i) { 
 		if (apic_probe[i]->mps_oem_check(mpc,oem,productid)) { 
-			genapic = apic_probe[i];
-			printk(KERN_INFO "Switched to APIC driver `%s'.\n", 
-			       genapic->name);
+			if (!cmdline_apic) {
+				genapic = apic_probe[i];
+				printk(KERN_INFO "Switched to APIC driver `%s'.\n",
+				       genapic->name);
+			}
 			return 1;
 		} 
 	} 
@@ -107,9 +109,11 @@ int __init acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 	int i;
 	for (i = 0; apic_probe[i]; ++i) { 
 		if (apic_probe[i]->acpi_madt_oem_check(oem_id, oem_table_id)) { 
-			genapic = apic_probe[i];
-			printk(KERN_INFO "Switched to APIC driver `%s'.\n", 
-			       genapic->name);
+			if (!cmdline_apic) {
+				genapic = apic_probe[i];
+				printk(KERN_INFO "Switched to APIC driver `%s'.\n",
+				       genapic->name);
+			}
 			return 1;
 		} 
 	} 
diff --git a/arch/i386/mach-voyager/voyager_cat.c b/arch/i386/mach-voyager/voyager_cat.c
index 3039539de51e..10d21df14531 100644
--- a/arch/i386/mach-voyager/voyager_cat.c
+++ b/arch/i386/mach-voyager/voyager_cat.c
@@ -120,7 +120,6 @@ static struct resource qic_res = {
  * It writes num_bits of the data buffer in msg starting at start_bit.
  * Note: This function assumes that any unused bit in the data stream
  * is set to zero so that the ors will work correctly */
-#define BITS_PER_BYTE 8
 static void
 cat_pack(__u8 *msg, const __u16 start_bit, __u8 *data, const __u16 num_bits)
 {
diff --git a/arch/i386/mm/init.c b/arch/i386/mm/init.c
index ae6534ad8161..3df1371d4520 100644
--- a/arch/i386/mm/init.c
+++ b/arch/i386/mm/init.c
@@ -651,7 +651,7 @@ void __init mem_init(void)
  * Specifically, in the case of x86, we will always add
  * memory to the highmem for now.
  */
-#ifdef CONFIG_HOTPLUG_MEMORY
+#ifdef CONFIG_MEMORY_HOTPLUG
 #ifndef CONFIG_NEED_MULTIPLE_NODES
 int add_memory(u64 start, u64 size)
 {
diff --git a/arch/i386/oprofile/nmi_int.c b/arch/i386/oprofile/nmi_int.c
index 1a2076ce6f6a..ec0fd3cfa774 100644
--- a/arch/i386/oprofile/nmi_int.c
+++ b/arch/i386/oprofile/nmi_int.c
@@ -332,10 +332,11 @@ static int __init ppro_init(char ** cpu_type)
 {
 	__u8 cpu_model = boot_cpu_data.x86_model;
 
-	if (cpu_model > 0xd)
+	if (cpu_model == 14)
+		*cpu_type = "i386/core";
+	else if (cpu_model > 0xd)
 		return 0;
-
-	if (cpu_model == 9) {
+	else if (cpu_model == 9) {
 		*cpu_type = "i386/p6_mobile";
 	} else if (cpu_model > 5) {
 		*cpu_type = "i386/piii";
diff --git a/arch/i386/pci/irq.c b/arch/i386/pci/irq.c
index 3ca59cad05f3..06dab00aaadc 100644
--- a/arch/i386/pci/irq.c
+++ b/arch/i386/pci/irq.c
@@ -588,7 +588,9 @@ static __init int via_router_probe(struct irq_router *r,
 	case PCI_DEVICE_ID_VIA_82C596:
 	case PCI_DEVICE_ID_VIA_82C686:
 	case PCI_DEVICE_ID_VIA_8231:
+	case PCI_DEVICE_ID_VIA_8233A:
 	case PCI_DEVICE_ID_VIA_8235:
+	case PCI_DEVICE_ID_VIA_8237:
 		/* FIXME: add new ones for 8233/5 */
 		r->name = "VIA";
 		r->get = pirq_via_get;
diff --git a/arch/i386/power/cpu.c b/arch/i386/power/cpu.c
index 50a0bef8c85f..79b2370c7fac 100644
--- a/arch/i386/power/cpu.c
+++ b/arch/i386/power/cpu.c
@@ -92,7 +92,7 @@ void __restore_processor_state(struct saved_context *ctxt)
 	write_cr4(ctxt->cr4);
 	write_cr3(ctxt->cr3);
 	write_cr2(ctxt->cr2);
-	write_cr2(ctxt->cr0);
+	write_cr0(ctxt->cr0);
 
 	/*
 	 * now restore the descriptor tables to their proper values
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index 9f40eeff0b5c..0f3076a820c3 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -413,6 +413,8 @@ config IA64_PALINFO
 config SGI_SN
 	def_bool y if (IA64_SGI_SN2 || IA64_GENERIC)
 
+source "drivers/sn/Kconfig"
+
 source "drivers/firmware/Kconfig"
 
 source "fs/Kconfig.binfmt"
diff --git a/arch/ia64/configs/sn2_defconfig b/arch/ia64/configs/sn2_defconfig
index a718034d68d0..9ea35398e10d 100644
--- a/arch/ia64/configs/sn2_defconfig
+++ b/arch/ia64/configs/sn2_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16-rc5
-# Mon Feb 27 16:06:38 2006
+# Linux kernel version: 2.6.17-rc3
+# Thu Apr 27 11:48:23 2006
 #
 
 #
@@ -24,6 +24,7 @@ CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_CPUSETS=y
+CONFIG_RELAY=y
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 # CONFIG_EMBEDDED is not set
@@ -38,10 +39,6 @@ CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
 CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -53,7 +50,6 @@ CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
@@ -62,6 +58,7 @@ CONFIG_STOP_MACHINE=y
 #
 # Block layer
 #
+# CONFIG_BLK_DEV_IO_TRACE is not set
 
 #
 # IO Schedulers
@@ -84,8 +81,10 @@ CONFIG_64BIT=y
 CONFIG_MMU=y
 CONFIG_SWIOTLB=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_TIME_INTERPOLATION=y
+CONFIG_DMI=y
 CONFIG_EFI=y
 CONFIG_GENERIC_IOMAP=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
@@ -116,7 +115,6 @@ CONFIG_IA64_SGI_SN_XP=m
 CONFIG_FORCE_MAX_ZONEORDER=17
 CONFIG_SMP=y
 CONFIG_NR_CPUS=1024
-CONFIG_IA64_NR_NODES=256
 # CONFIG_HOTPLUG_CPU is not set
 CONFIG_SCHED_SMT=y
 CONFIG_PREEMPT=y
@@ -136,6 +134,7 @@ CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_ENABLE=y
 CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
 CONFIG_NUMA=y
+CONFIG_NODES_SHIFT=10
 CONFIG_VIRTUAL_MEM_MAP=y
 CONFIG_HOLES_IN_ZONE=y
 CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
@@ -187,7 +186,6 @@ CONFIG_ACPI_SYSTEM=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 # CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY_PROC=y
 # CONFIG_PCI_DEBUG is not set
 
 #
@@ -231,6 +229,7 @@ CONFIG_SYN_COOKIES=y
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
 CONFIG_INET_DIAG=m
 CONFIG_INET_TCP_DIAG=m
@@ -238,9 +237,11 @@ CONFIG_INET_TCP_DIAG=m
 CONFIG_TCP_CONG_BIC=y
 CONFIG_IPV6=m
 # CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
 # CONFIG_INET6_AH is not set
 # CONFIG_INET6_ESP is not set
 # CONFIG_INET6_IPCOMP is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
 # CONFIG_IPV6_TUNNEL is not set
 # CONFIG_NETFILTER is not set
@@ -468,9 +469,14 @@ CONFIG_SCSI_SATA_VITESSE=y
 # CONFIG_SCSI_INIA100 is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
 CONFIG_SCSI_QLOGIC_1280=y
-# CONFIG_SCSI_QLA_FC is not set
+CONFIG_SCSI_QLA_FC=y
+CONFIG_SCSI_QLA2XXX_EMBEDDED_FIRMWARE=y
+# CONFIG_SCSI_QLA21XX is not set
+CONFIG_SCSI_QLA22XX=y
+CONFIG_SCSI_QLA2300=y
+CONFIG_SCSI_QLA2322=y
+# CONFIG_SCSI_QLA24XX is not set
 # CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
@@ -486,6 +492,7 @@ CONFIG_MD_RAID0=y
 CONFIG_MD_RAID1=y
 # CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID5=y
+# CONFIG_MD_RAID5_RESHAPE is not set
 # CONFIG_MD_RAID6 is not set
 CONFIG_MD_MULTIPATH=y
 # CONFIG_MD_FAULTY is not set
@@ -694,6 +701,7 @@ CONFIG_EFI_RTC=y
 # Ftape, the floppy tape device driver
 #
 CONFIG_AGP=y
+# CONFIG_AGP_VIA is not set
 CONFIG_AGP_SGI_TIOCA=y
 # CONFIG_DRM is not set
 CONFIG_RAW_DRIVER=m
@@ -735,10 +743,6 @@ CONFIG_MMTIMER=y
 #
 
 #
-# Multimedia Capabilities Port drivers
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -747,6 +751,7 @@ CONFIG_MMTIMER=y
 # Digital Video Broadcasting Devices
 #
 # CONFIG_DVB is not set
+# CONFIG_USB_DABUSB is not set
 
 #
 # Graphics support
@@ -757,6 +762,7 @@ CONFIG_MMTIMER=y
 # Console display driver support
 #
 CONFIG_VGA_CONSOLE=y
+# CONFIG_VGACON_SOFT_SCROLLBACK is not set
 CONFIG_DUMMY_CONSOLE=y
 
 #
@@ -769,6 +775,7 @@ CONFIG_DUMMY_CONSOLE=y
 #
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=m
 # CONFIG_USB_DEBUG is not set
 
@@ -829,9 +836,7 @@ CONFIG_USB_HIDINPUT=y
 # CONFIG_USB_ACECAD is not set
 # CONFIG_USB_KBTAB is not set
 # CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_TOUCHSCREEN is not set
 # CONFIG_USB_YEALINK is not set
 # CONFIG_USB_XPAD is not set
 # CONFIG_USB_ATI_REMOTE is not set
@@ -846,15 +851,6 @@ CONFIG_USB_HIDINPUT=y
 # CONFIG_USB_MICROTEK is not set
 
 #
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-
-#
-# Video4Linux support is needed for USB Multimedia device support
-#
-
-#
 # USB Network Adapters
 #
 # CONFIG_USB_CATC is not set
@@ -905,15 +901,29 @@ CONFIG_USB_MON=y
 # CONFIG_MMC is not set
 
 #
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
 # InfiniBand support
 #
 CONFIG_INFINIBAND=m
 # CONFIG_INFINIBAND_USER_MAD is not set
 CONFIG_INFINIBAND_USER_ACCESS=m
 CONFIG_INFINIBAND_MTHCA=m
-# CONFIG_INFINIBAND_MTHCA_DEBUG is not set
+CONFIG_INFINIBAND_MTHCA_DEBUG=y
 CONFIG_INFINIBAND_IPOIB=m
-# CONFIG_INFINIBAND_IPOIB_DEBUG is not set
+CONFIG_INFINIBAND_IPOIB_DEBUG=y
+# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
 CONFIG_INFINIBAND_SRP=m
 
 #
@@ -923,8 +933,13 @@ CONFIG_SGI_IOC4=y
 CONFIG_SGI_IOC3=y
 
 #
-# EDAC - error detection and reporting (RAS)
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
 #
+# CONFIG_RTC_CLASS is not set
 
 #
 # File systems
@@ -997,7 +1012,6 @@ CONFIG_TMPFS=y
 CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
 CONFIG_RAMFS=y
-CONFIG_RELAYFS_FS=m
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -1145,7 +1159,7 @@ CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
 CONFIG_DEBUG_PREEMPT=y
-CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_MUTEXES is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_KOBJECT is not set
diff --git a/arch/ia64/ia32/binfmt_elf32.c b/arch/ia64/ia32/binfmt_elf32.c
index 4e7a6a1ec6c7..da03c06744f1 100644
--- a/arch/ia64/ia32/binfmt_elf32.c
+++ b/arch/ia64/ia32/binfmt_elf32.c
@@ -35,6 +35,9 @@ extern void ia64_elf32_init (struct pt_regs *regs);
 
 static void elf32_set_personality (void);
 
+static unsigned long __attribute ((unused))
+randomize_stack_top(unsigned long stack_top);
+
 #define setup_arg_pages(bprm,tos,exec)		ia32_setup_arg_pages(bprm,exec)
 #define elf_map				elf32_map
 
diff --git a/arch/ia64/ia32/ia32_entry.S b/arch/ia64/ia32/ia32_entry.S
index 95fe04400f6b..a32cd59b81ed 100644
--- a/arch/ia64/ia32/ia32_entry.S
+++ b/arch/ia64/ia32/ia32_entry.S
@@ -334,7 +334,7 @@ ia32_syscall_table:
 	data8 sys_setdomainname
 	data8 sys32_newuname
 	data8 sys32_modify_ldt
-	data8 sys_ni_syscall	/* adjtimex */
+	data8 compat_sys_adjtimex
 	data8 sys32_mprotect	  /* 125 */
 	data8 compat_sys_sigprocmask
 	data8 sys_ni_syscall	/* create_module */
diff --git a/arch/ia64/kernel/Makefile b/arch/ia64/kernel/Makefile
index 59e871dae742..09a0dbc17fb6 100644
--- a/arch/ia64/kernel/Makefile
+++ b/arch/ia64/kernel/Makefile
@@ -7,7 +7,7 @@ extra-y	:= head.o init_task.o vmlinux.lds
 obj-y := acpi.o entry.o efi.o efi_stub.o gate-data.o fsys.o ia64_ksyms.o irq.o irq_ia64.o	\
 	 irq_lsapic.o ivt.o machvec.o pal.o patch.o process.o perfmon.o ptrace.o sal.o		\
 	 salinfo.o semaphore.o setup.o signal.o sys_ia64.o time.o traps.o unaligned.o \
-	 unwind.o mca.o mca_asm.o topology.o dmi_scan.o
+	 unwind.o mca.o mca_asm.o topology.o
 
 obj-$(CONFIG_IA64_BRL_EMU)	+= brl_emu.o
 obj-$(CONFIG_IA64_GENERIC)	+= acpi-ext.o
@@ -30,7 +30,6 @@ obj-$(CONFIG_IA64_MCA_RECOVERY)	+= mca_recovery.o
 obj-$(CONFIG_KPROBES)		+= kprobes.o jprobes.o
 obj-$(CONFIG_IA64_UNCACHED_ALLOCATOR)	+= uncached.o
 mca_recovery-y			+= mca_drv.o mca_drv_asm.o
-dmi_scan-y			+= ../../i386/kernel/dmi_scan.o
 
 # The gate DSO image is built using a special linker script.
 targets += gate.so gate-syms.o
diff --git a/arch/ia64/kernel/entry.S b/arch/ia64/kernel/entry.S
index 6e16f6b35bd3..bcb80ca5cf40 100644
--- a/arch/ia64/kernel/entry.S
+++ b/arch/ia64/kernel/entry.S
@@ -1609,5 +1609,7 @@ sys_call_table:
 	data8 sys_set_robust_list
 	data8 sys_get_robust_list
 	data8 sys_sync_file_range		// 1300
+	data8 sys_tee
+	data8 sys_vmsplice
 
 	.org sys_call_table + 8*NR_syscalls	// guard against failures to increase NR_syscalls
diff --git a/arch/ia64/kernel/iosapic.c b/arch/ia64/kernel/iosapic.c
index 7956eb9058fc..d58c1c5c903a 100644
--- a/arch/ia64/kernel/iosapic.c
+++ b/arch/ia64/kernel/iosapic.c
@@ -416,7 +416,7 @@ iosapic_end_level_irq (unsigned int irq)
 	ia64_vector vec = irq_to_vector(irq);
 	struct iosapic_rte_info *rte;
 
-	move_irq(irq);
+	move_native_irq(irq);
 	list_for_each_entry(rte, &iosapic_intr_info[vec].rtes, rte_list)
 		iosapic_eoi(rte->addr, vec);
 }
@@ -458,7 +458,7 @@ iosapic_ack_edge_irq (unsigned int irq)
 {
 	irq_desc_t *idesc = irq_descp(irq);
 
-	move_irq(irq);
+	move_native_irq(irq);
 	/*
 	 * Once we have recorded IRQ_PENDING already, we can mask the
 	 * interrupt for real. This prevents IRQ storms from unhandled
diff --git a/arch/ia64/kernel/irq.c b/arch/ia64/kernel/irq.c
index 5ce908ef9c95..9c72ea3f6432 100644
--- a/arch/ia64/kernel/irq.c
+++ b/arch/ia64/kernel/irq.c
@@ -101,7 +101,6 @@ void set_irq_affinity_info (unsigned int irq, int hwid, int redir)
 
 	if (irq < NR_IRQS) {
 		irq_affinity[irq] = mask;
-		set_irq_info(irq, mask);
 		irq_redir[irq] = (char) (redir & 0xff);
 	}
 }
diff --git a/arch/ia64/kernel/kprobes.c b/arch/ia64/kernel/kprobes.c
index 789881ca83d4..f9039f88d01d 100644
--- a/arch/ia64/kernel/kprobes.c
+++ b/arch/ia64/kernel/kprobes.c
@@ -251,7 +251,7 @@ static void __kprobes prepare_break_inst(uint template, uint  slot,
 	update_kprobe_inst_flag(template, slot, major_opcode, kprobe_inst, p);
 }
 
-static inline void get_kprobe_inst(bundle_t *bundle, uint slot,
+static void __kprobes get_kprobe_inst(bundle_t *bundle, uint slot,
 	       	unsigned long *kprobe_inst, uint *major_opcode)
 {
 	unsigned long kprobe_inst_p0, kprobe_inst_p1;
@@ -278,7 +278,7 @@ static inline void get_kprobe_inst(bundle_t *bundle, uint slot,
 }
 
 /* Returns non-zero if the addr is in the Interrupt Vector Table */
-static inline int in_ivt_functions(unsigned long addr)
+static int __kprobes in_ivt_functions(unsigned long addr)
 {
 	return (addr >= (unsigned long)__start_ivt_text
 		&& addr < (unsigned long)__end_ivt_text);
@@ -308,19 +308,19 @@ static int __kprobes valid_kprobe_addr(int template, int slot,
 	return 0;
 }
 
-static inline void save_previous_kprobe(struct kprobe_ctlblk *kcb)
+static void __kprobes save_previous_kprobe(struct kprobe_ctlblk *kcb)
 {
 	kcb->prev_kprobe.kp = kprobe_running();
 	kcb->prev_kprobe.status = kcb->kprobe_status;
 }
 
-static inline void restore_previous_kprobe(struct kprobe_ctlblk *kcb)
+static void __kprobes restore_previous_kprobe(struct kprobe_ctlblk *kcb)
 {
 	__get_cpu_var(current_kprobe) = kcb->prev_kprobe.kp;
 	kcb->kprobe_status = kcb->prev_kprobe.status;
 }
 
-static inline void set_current_kprobe(struct kprobe *p,
+static void __kprobes set_current_kprobe(struct kprobe *p,
 			struct kprobe_ctlblk *kcb)
 {
 	__get_cpu_var(current_kprobe) = p;
diff --git a/arch/ia64/kernel/mca.c b/arch/ia64/kernel/mca.c
index 5e6fdbe78bcd..6a0880639bc9 100644
--- a/arch/ia64/kernel/mca.c
+++ b/arch/ia64/kernel/mca.c
@@ -963,7 +963,7 @@ no_mod:
  */
 
 static void
-ia64_wait_for_slaves(int monarch)
+ia64_wait_for_slaves(int monarch, const char *type)
 {
 	int c, wait = 0, missing = 0;
 	for_each_online_cpu(c) {
@@ -989,7 +989,7 @@ ia64_wait_for_slaves(int monarch)
 	}
 	if (!missing)
 		goto all_in;
-	printk(KERN_INFO "OS MCA slave did not rendezvous on cpu");
+	printk(KERN_INFO "OS %s slave did not rendezvous on cpu", type);
 	for_each_online_cpu(c) {
 		if (c == monarch)
 			continue;
@@ -1000,7 +1000,7 @@ ia64_wait_for_slaves(int monarch)
 	return;
 
 all_in:
-	printk(KERN_INFO "All OS MCA slaves have reached rendezvous\n");
+	printk(KERN_INFO "All OS %s slaves have reached rendezvous\n", type);
 	return;
 }
 
@@ -1038,7 +1038,7 @@ ia64_mca_handler(struct pt_regs *regs, struct switch_stack *sw,
 	if (notify_die(DIE_MCA_MONARCH_ENTER, "MCA", regs, (long)&nd, 0, 0)
 			== NOTIFY_STOP)
 		ia64_mca_spin(__FUNCTION__);
-	ia64_wait_for_slaves(cpu);
+	ia64_wait_for_slaves(cpu, "MCA");
 
 	/* Wakeup all the processors which are spinning in the rendezvous loop.
 	 * They will leave SAL, then spin in the OS with interrupts disabled
@@ -1429,7 +1429,7 @@ ia64_init_handler(struct pt_regs *regs, struct switch_stack *sw,
 	 */
 	printk("Delaying for 5 seconds...\n");
 	udelay(5*1000000);
-	ia64_wait_for_slaves(cpu);
+	ia64_wait_for_slaves(cpu, "INIT");
 	/* If nobody intercepts DIE_INIT_MONARCH_PROCESS then we drop through
 	 * to default_monarch_init_process() above and just print all the
 	 * tasks.
diff --git a/arch/ia64/kernel/mca_drv.c b/arch/ia64/kernel/mca_drv.c
index 37c88eb55873..ca6666b51ccb 100644
--- a/arch/ia64/kernel/mca_drv.c
+++ b/arch/ia64/kernel/mca_drv.c
@@ -62,6 +62,11 @@ typedef enum {
 	ISOLATE_NONE
 } isolate_status_t;
 
+typedef enum {
+	MCA_NOT_RECOVERED = 0,
+	MCA_RECOVERED	  = 1
+} recovery_status_t;
+
 /*
  *  This pool keeps pointers to the section part of SAL error record
  */
@@ -71,6 +76,18 @@ static struct {
 	int	     max_idx; /* Maximum index of section pointer list pool */
 } slidx_pool;
 
+static int
+fatal_mca(const char *fmt, ...)
+{
+	va_list args;
+
+	va_start(args, fmt);
+	vprintk(fmt, args);
+	va_end(args);
+
+	return MCA_NOT_RECOVERED;
+}
+
 /**
  * mca_page_isolate - isolate a poisoned page in order not to use it later
  * @paddr:	poisoned memory location
@@ -424,7 +441,7 @@ recover_from_read_error(slidx_table_t *slidx,
 
 	/* Is target address valid? */
 	if (!pbci->tv)
-		return 0;
+		return fatal_mca(KERN_ALERT "MCA: target address not valid\n");
 
 	/*
 	 * cpu read or memory-mapped io read
@@ -442,7 +459,7 @@ recover_from_read_error(slidx_table_t *slidx,
 
 	/* Is minstate valid? */
 	if (!peidx_bottom(peidx) || !(peidx_bottom(peidx)->valid.minstate))
-		return 0;
+		return fatal_mca(KERN_ALERT "MCA: minstate not valid\n");
 	psr1 =(struct ia64_psr *)&(peidx_minstate_area(peidx)->pmsa_ipsr);
 	psr2 =(struct ia64_psr *)&(peidx_minstate_area(peidx)->pmsa_xpsr);
 
@@ -476,12 +493,13 @@ recover_from_read_error(slidx_table_t *slidx,
 			psr2->bn  = 1;
 			psr2->i  = 0;
 
-			return 1;
+			return MCA_RECOVERED;
 		}
 
 	}
 
-	return 0;
+	return fatal_mca(KERN_ALERT "MCA: kernel context not recovered,"
+			  " iip 0x%lx\n", pmsa->pmsa_iip);
 }
 
 /**
@@ -567,13 +585,13 @@ recover_from_processor_error(int platform, slidx_table_t *slidx,
 	 * The machine check is corrected.
 	 */
 	if (psp->cm == 1)
-		return 1;
+		return MCA_RECOVERED;
 
 	/*
 	 * The error was not contained.  Software must be reset.
 	 */
 	if (psp->us || psp->ci == 0)
-		return 0;
+		return fatal_mca(KERN_ALERT "MCA: error not contained\n");
 
 	/*
 	 * The cache check and bus check bits have four possible states
@@ -584,20 +602,22 @@ recover_from_processor_error(int platform, slidx_table_t *slidx,
 	 *    1  1	Memory error, attempt recovery
 	 */
 	if (psp->bc == 0 || pbci == NULL)
-		return 0;
+		return fatal_mca(KERN_ALERT "MCA: No bus check\n");
 
 	/*
 	 * Sorry, we cannot handle so many.
 	 */
 	if (peidx_bus_check_num(peidx) > 1)
-		return 0;
+		return fatal_mca(KERN_ALERT "MCA: Too many bus checks\n");
 	/*
 	 * Well, here is only one bus error.
 	 */
-	if (pbci->ib || pbci->cc)
-		return 0;
+	if (pbci->ib)
+		return fatal_mca(KERN_ALERT "MCA: Internal Bus error\n");
+	if (pbci->cc)
+		return fatal_mca(KERN_ALERT "MCA: Cache-cache error\n");
 	if (pbci->eb && pbci->bsi > 0)
-		return 0;
+		return fatal_mca(KERN_ALERT "MCA: External bus check fatal status\n");
 
 	/*
 	 * This is a local MCA and estimated as recoverble external bus error.
@@ -609,7 +629,7 @@ recover_from_processor_error(int platform, slidx_table_t *slidx,
 	/*
 	 * On account of strange SAL error record, we cannot recover.
 	 */
-	return 0;
+	return fatal_mca(KERN_ALERT "MCA: Strange SAL record\n");
 }
 
 /**
@@ -638,12 +658,10 @@ mca_try_to_recover(void *rec, struct ia64_sal_os_state *sos)
 
 	 /* Now, OS can recover when there is one processor error section */
 	if (n_proc_err > 1)
-		return 0;
-	else if (n_proc_err == 0) {
+		return fatal_mca(KERN_ALERT "MCA: Too Many Errors\n");
+	else if (n_proc_err == 0)
 		/* Weird SAL record ... We need not to recover */
-
-		return 1;
-	}
+		return fatal_mca(KERN_ALERT "MCA: Weird SAL record\n");
 
 	/* Make index of processor error section */
 	mca_make_peidx((sal_log_processor_info_t*)
@@ -654,7 +672,7 @@ mca_try_to_recover(void *rec, struct ia64_sal_os_state *sos)
 
 	/* Check whether MCA is global or not */
 	if (is_mca_global(&peidx, &pbci, sos))
-		return 0;
+		return fatal_mca(KERN_ALERT "MCA: global MCA\n");
 	
 	/* Try to recover a processor error */
 	return recover_from_processor_error(platform_err, &slidx, &peidx,
diff --git a/arch/ia64/kernel/palinfo.c b/arch/ia64/kernel/palinfo.c
index 6386f63c413e..859fb37ff49b 100644
--- a/arch/ia64/kernel/palinfo.c
+++ b/arch/ia64/kernel/palinfo.c
@@ -959,7 +959,7 @@ remove_palinfo_proc_entries(unsigned int hcpu)
 	}
 }
 
-static int __devinit palinfo_cpu_callback(struct notifier_block *nfb,
+static int palinfo_cpu_callback(struct notifier_block *nfb,
 								unsigned long action,
 								void *hcpu)
 {
diff --git a/arch/ia64/kernel/ptrace.c b/arch/ia64/kernel/ptrace.c
index 9887c8787e7a..e61e15e28d8b 100644
--- a/arch/ia64/kernel/ptrace.c
+++ b/arch/ia64/kernel/ptrace.c
@@ -1644,7 +1644,7 @@ syscall_trace_enter (long arg0, long arg1, long arg2, long arg3,
 			arch = AUDIT_ARCH_IA64;
 		}
 
-		audit_syscall_entry(current, arch, syscall, arg0, arg1, arg2, arg3);
+		audit_syscall_entry(arch, syscall, arg0, arg1, arg2, arg3);
 	}
 
 }
@@ -1662,7 +1662,7 @@ syscall_trace_leave (long arg0, long arg1, long arg2, long arg3,
 
 		if (success != AUDITSC_SUCCESS)
 			result = -result;
-		audit_syscall_exit(current, success, result);
+		audit_syscall_exit(success, result);
 	}
 
 	if (test_thread_flag(TIF_SYSCALL_TRACE)
diff --git a/arch/ia64/kernel/salinfo.c b/arch/ia64/kernel/salinfo.c
index 9d5a823479a3..663a186ad194 100644
--- a/arch/ia64/kernel/salinfo.c
+++ b/arch/ia64/kernel/salinfo.c
@@ -572,7 +572,7 @@ static struct file_operations salinfo_data_fops = {
 };
 
 #ifdef	CONFIG_HOTPLUG_CPU
-static int __devinit
+static int
 salinfo_cpu_callback(struct notifier_block *nb, unsigned long action, void *hcpu)
 {
 	unsigned int i, cpu = (unsigned long)hcpu;
diff --git a/arch/ia64/kernel/topology.c b/arch/ia64/kernel/topology.c
index b47476d655f1..4f3a16b37f8f 100644
--- a/arch/ia64/kernel/topology.c
+++ b/arch/ia64/kernel/topology.c
@@ -305,13 +305,10 @@ static struct kobj_type cache_ktype_percpu_entry = {
 
 static void __cpuinit cpu_cache_sysfs_exit(unsigned int cpu)
 {
-	if (all_cpu_cache_info[cpu].cache_leaves) {
-		kfree(all_cpu_cache_info[cpu].cache_leaves);
-		all_cpu_cache_info[cpu].cache_leaves = NULL;
-	}
+	kfree(all_cpu_cache_info[cpu].cache_leaves);
+	all_cpu_cache_info[cpu].cache_leaves = NULL;
 	all_cpu_cache_info[cpu].num_cache_leaves = 0;
 	memset(&all_cpu_cache_info[cpu].kobj, 0, sizeof(struct kobject));
-
 	return;
 }
 
@@ -429,7 +426,7 @@ static int __cpuinit cache_remove_dev(struct sys_device * sys_dev)
  * When a cpu is hot-plugged, do a check and initiate
  * cache kobject if necessary
  */
-static int __cpuinit cache_cpu_callback(struct notifier_block *nfb,
+static int cache_cpu_callback(struct notifier_block *nfb,
 		unsigned long action, void *hcpu)
 {
 	unsigned int cpu = (unsigned long)hcpu;
diff --git a/arch/ia64/lib/memcpy_mck.S b/arch/ia64/lib/memcpy_mck.S
index 46c9331e7ab5..9e534d52b1d5 100644
--- a/arch/ia64/lib/memcpy_mck.S
+++ b/arch/ia64/lib/memcpy_mck.S
@@ -6,7 +6,9 @@
  *	in1:	source address
  *	in2:	number of bytes to copy
  * Output:
- * 	0 if success, or number of byte NOT copied if error occurred.
+ *	for memcpy:    return dest
+ * 	for copy_user: return 0 if success,
+ *		       or number of byte NOT copied if error occurred.
  *
  * Copyright (C) 2002 Intel Corp.
  * Copyright (C) 2002 Ken Chen <kenneth.w.chen@intel.com>
@@ -73,6 +75,7 @@ GLOBAL_ENTRY(memcpy)
 	and	r28=0x7,in0
 	and	r29=0x7,in1
 	mov	f6=f0
+	mov	retval=in0
 	br.cond.sptk .common_code
 	;;
 END(memcpy)
@@ -84,7 +87,7 @@ GLOBAL_ENTRY(__copy_user)
 	mov	f6=f1
 	mov	saved_in0=in0	// save dest pointer
 	mov	saved_in1=in1	// save src pointer
-	mov	saved_in2=in2	// save len
+	mov	retval=r0	// initialize return value
 	;;
 .common_code:
 	cmp.gt	p15,p0=8,in2	// check for small size
@@ -92,7 +95,7 @@ GLOBAL_ENTRY(__copy_user)
 	cmp.ne	p14,p0=0,r29	// check src alignment
 	add	src0=0,in1
 	sub	r30=8,r28	// for .align_dest
-	mov	retval=r0	// initialize return value
+	mov	saved_in2=in2	// save len
 	;;
 	add	dst0=0,in0
 	add	dst1=1,in0	// dest odd index
diff --git a/arch/ia64/mm/discontig.c b/arch/ia64/mm/discontig.c
index ec9eeb89975d..b6bcc9fa3603 100644
--- a/arch/ia64/mm/discontig.c
+++ b/arch/ia64/mm/discontig.c
@@ -519,6 +519,68 @@ void __cpuinit *per_cpu_init(void)
 }
 #endif /* CONFIG_SMP */
 
+#ifdef CONFIG_VIRTUAL_MEM_MAP
+static inline int find_next_valid_pfn_for_pgdat(pg_data_t *pgdat, int i)
+{
+	unsigned long end_address, hole_next_pfn;
+	unsigned long stop_address;
+
+	end_address = (unsigned long) &vmem_map[pgdat->node_start_pfn + i];
+	end_address = PAGE_ALIGN(end_address);
+
+	stop_address = (unsigned long) &vmem_map[
+		pgdat->node_start_pfn + pgdat->node_spanned_pages];
+
+	do {
+		pgd_t *pgd;
+		pud_t *pud;
+		pmd_t *pmd;
+		pte_t *pte;
+
+		pgd = pgd_offset_k(end_address);
+		if (pgd_none(*pgd)) {
+			end_address += PGDIR_SIZE;
+			continue;
+		}
+
+		pud = pud_offset(pgd, end_address);
+		if (pud_none(*pud)) {
+			end_address += PUD_SIZE;
+			continue;
+		}
+
+		pmd = pmd_offset(pud, end_address);
+		if (pmd_none(*pmd)) {
+			end_address += PMD_SIZE;
+			continue;
+		}
+
+		pte = pte_offset_kernel(pmd, end_address);
+retry_pte:
+		if (pte_none(*pte)) {
+			end_address += PAGE_SIZE;
+			pte++;
+			if ((end_address < stop_address) &&
+			    (end_address != ALIGN(end_address, 1UL << PMD_SHIFT)))
+				goto retry_pte;
+			continue;
+		}
+		/* Found next valid vmem_map page */
+		break;
+	} while (end_address < stop_address);
+
+	end_address = min(end_address, stop_address);
+	end_address = end_address - (unsigned long) vmem_map + sizeof(struct page) - 1;
+	hole_next_pfn = end_address / sizeof(struct page);
+	return hole_next_pfn - pgdat->node_start_pfn;
+}
+#else
+static inline int find_next_valid_pfn_for_pgdat(pg_data_t *pgdat, int i)
+{
+	return i + 1;
+}
+#endif
+
 /**
  * show_mem - give short summary of memory stats
  *
@@ -547,8 +609,10 @@ void show_mem(void)
 			struct page *page;
 			if (pfn_valid(pgdat->node_start_pfn + i))
 				page = pfn_to_page(pgdat->node_start_pfn + i);
-			else
+			else {
+				i = find_next_valid_pfn_for_pgdat(pgdat, i) - 1;
 				continue;
+			}
 			if (PageReserved(page))
 				reserved++;
 			else if (PageSwapCache(page))
diff --git a/arch/ia64/pci/pci.c b/arch/ia64/pci/pci.c
index 9ba32b2d96d0..ab829a22f8a4 100644
--- a/arch/ia64/pci/pci.c
+++ b/arch/ia64/pci/pci.c
@@ -31,7 +31,6 @@
 #include <asm/irq.h>
 #include <asm/hw_irq.h>
 
-
 /*
  * Low-level SAL-based PCI configuration access functions. Note that SAL
  * calls are already serialized (via sal_lock), so we don't need another
@@ -707,7 +706,7 @@ int ia64_pci_legacy_read(struct pci_bus *bus, u16 port, u32 *val, u8 size)
  *
  * Simply writes @size bytes of @val to @port.
  */
-int ia64_pci_legacy_write(struct pci_dev *bus, u16 port, u32 val, u8 size)
+int ia64_pci_legacy_write(struct pci_bus *bus, u16 port, u32 val, u8 size)
 {
 	int ret = size;
 
diff --git a/arch/ia64/sn/kernel/sn2/sn_hwperf.c b/arch/ia64/sn/kernel/sn2/sn_hwperf.c
index d917afa30b27..739c948dc504 100644
--- a/arch/ia64/sn/kernel/sn2/sn_hwperf.c
+++ b/arch/ia64/sn/kernel/sn2/sn_hwperf.c
@@ -284,6 +284,8 @@ static int sn_hwperf_get_nearest_node_objdata(struct sn_hwperf_object_info *objb
 	/* find nearest node with cpus and nearest memory */
 	for (router=NULL, j=0; j < op->ports; j++) {
 		dest = sn_hwperf_findobj_id(objbuf, nobj, ptdata[j].conn_id);
+		if (dest && SN_HWPERF_IS_ROUTER(dest))
+			router = dest;
 		if (!dest || SN_HWPERF_FOREIGN(dest) ||
 		    !SN_HWPERF_IS_NODE(dest) || SN_HWPERF_IS_IONODE(dest)) {
 			continue;
@@ -299,8 +301,6 @@ static int sn_hwperf_get_nearest_node_objdata(struct sn_hwperf_object_info *objb
 				*near_mem_node = c;
 			found_mem++;
 		}
-		if (SN_HWPERF_IS_ROUTER(dest))
-			router = dest;
 	}
 
 	if (router && (!found_cpu || !found_mem)) {
@@ -493,7 +493,7 @@ static int sn_topology_show(struct seq_file *s, void *d)
 		 * numalink ports
 		 */
 		sz = obj->ports * sizeof(struct sn_hwperf_port_info);
-		if ((ptdata = vmalloc(sz)) == NULL)
+		if ((ptdata = kmalloc(sz, GFP_KERNEL)) == NULL)
 			return -ENOMEM;
 		e = ia64_sn_hwperf_op(sn_hwperf_master_nasid,
 				      SN_HWPERF_ENUM_PORTS, obj->id, sz,
@@ -541,7 +541,7 @@ static int sn_topology_show(struct seq_file *s, void *d)
 				(SN_HWPERF_IS_NL3ROUTER(obj) ||
 				SN_HWPERF_IS_NL3ROUTER(p)) ?  "LLP3" : "LLP4");
 		}
-		vfree(ptdata);
+		kfree(ptdata);
 	}
 
 	return 0;
diff --git a/arch/ia64/sn/kernel/xpc_partition.c b/arch/ia64/sn/kernel/xpc_partition.c
index 94211429fd0c..2a89cfce4954 100644
--- a/arch/ia64/sn/kernel/xpc_partition.c
+++ b/arch/ia64/sn/kernel/xpc_partition.c
@@ -136,9 +136,7 @@ xpc_get_rsvd_page_pa(int nasid)
 		}
 
 		if (L1_CACHE_ALIGN(len) > buf_len) {
-			if (buf_base != NULL) {
-				kfree(buf_base);
-			}
+			kfree(buf_base);
 			buf_len = L1_CACHE_ALIGN(len);
 			buf = (u64) xpc_kmalloc_cacheline_aligned(buf_len,
 							GFP_KERNEL, &buf_base);
@@ -159,9 +157,7 @@ xpc_get_rsvd_page_pa(int nasid)
 		}
 	}
 
-	if (buf_base != NULL) {
-		kfree(buf_base);
-	}
+	kfree(buf_base);
 
 	if (status != SALRET_OK) {
 		rp_pa = 0;
diff --git a/arch/ia64/sn/pci/tioce_provider.c b/arch/ia64/sn/pci/tioce_provider.c
index fa073cc4b565..833295624e5d 100644
--- a/arch/ia64/sn/pci/tioce_provider.c
+++ b/arch/ia64/sn/pci/tioce_provider.c
@@ -682,9 +682,6 @@ tioce_reserve_m32(struct tioce_kernel *ce_kern, u64 base, u64 limit)
 	int ate_index, last_ate, ps;
 	struct tioce *ce_mmr;
 
-	if (!TIOCE_M32_ADDR(base))
-		return;
-
 	ce_mmr = (struct tioce *)ce_kern->ce_common->ce_pcibus.bs_base;
 	ps = ce_kern->ce_ate3240_pagesize;
 	ate_index = ATE_PAGE(base, ps);
@@ -693,6 +690,9 @@ tioce_reserve_m32(struct tioce_kernel *ce_kern, u64 base, u64 limit)
 	if (ate_index < 64)
 		ate_index = 64;
 
+	if (last_ate >= TIOCE_NUM_M3240_ATES)
+		last_ate = TIOCE_NUM_M3240_ATES - 1;
+
 	while (ate_index <= last_ate) {
 		u64 ate;
 
diff --git a/arch/m32r/kernel/entry.S b/arch/m32r/kernel/entry.S
index 3871b65f0c82..920bb742b7a2 100644
--- a/arch/m32r/kernel/entry.S
+++ b/arch/m32r/kernel/entry.S
@@ -20,7 +20,7 @@
  * Stack layout in 'ret_from_system_call':
  * 	ptrace needs to have all regs on the stack.
  *	if the order here is changed, it needs to be
- *	updated in fork.c:copy_process, signal.c:do_signal,
+ *	updated in fork.c:copy_thread, signal.c:do_signal,
  *	ptrace.c and ptrace.h
  *
  * M32Rx/M32R2				M32R
@@ -41,18 +41,17 @@
  *       @(0x38,sp) - syscall_nr	ditto
  *       @(0x3c,sp) - acc0h		@(0x3c,sp) - acch
  *       @(0x40,sp) - acc0l		@(0x40,sp) - accl
- *       @(0x44,sp) - acc1h		@(0x44,sp) - psw
- *       @(0x48,sp) - acc1l		@(0x48,sp) - bpc
- *       @(0x4c,sp) - psw		@(0x4c,sp) - bbpsw
- *       @(0x50,sp) - bpc		@(0x50,sp) - bbpc
- *       @(0x54,sp) - bbpsw		@(0x54,sp) - spu (cr3)
- *       @(0x58,sp) - bbpc		@(0x58,sp) - fp (r13)
- *       @(0x5c,sp) - spu (cr3)		@(0x5c,sp) - lr (r14)
- *       @(0x60,sp) - fp (r13)		@(0x60,sp) - spi (cr12)
- *       @(0x64,sp) - lr (r14)		@(0x64,sp) - orig_r0
- *       @(0x68,sp) - spi (cr2)
- *       @(0x6c,sp) - orig_r0
- *
+ *       @(0x44,sp) - acc1h		@(0x44,sp) - dummy_acc1h
+ *       @(0x48,sp) - acc1l		@(0x48,sp) - dummy_acc1l
+ *       @(0x4c,sp) - psw		ditto
+ *       @(0x50,sp) - bpc		ditto
+ *       @(0x54,sp) - bbpsw		ditto
+ *       @(0x58,sp) - bbpc		ditto
+ *       @(0x5c,sp) - spu (cr3)		ditto
+ *       @(0x60,sp) - fp (r13)		ditto
+ *       @(0x64,sp) - lr (r14)		ditto
+ *       @(0x68,sp) - spi (cr2)		ditto
+ *       @(0x6c,sp) - orig_r0		ditto
  */
 
 #include <linux/config.h>
@@ -102,6 +101,12 @@
 #define ACC0L(reg)		@(0x40,reg)
 #define ACC1H(reg)		@(0x44,reg)
 #define ACC1L(reg)		@(0x48,reg)
+#elif defined(CONFIG_ISA_M32R2) || defined(CONFIG_ISA_M32R)
+#define ACCH(reg)		@(0x3C,reg)
+#define ACCL(reg)		@(0x40,reg)
+#else
+#error unknown isa configuration
+#endif
 #define PSW(reg)		@(0x4C,reg)
 #define BPC(reg)		@(0x50,reg)
 #define BBPSW(reg)		@(0x54,reg)
@@ -111,21 +116,6 @@
 #define LR(reg)			@(0x64,reg)
 #define SP(reg)			@(0x68,reg)
 #define ORIG_R0(reg)		@(0x6C,reg)
-#elif defined(CONFIG_ISA_M32R2) || defined(CONFIG_ISA_M32R)
-#define ACCH(reg)		@(0x3C,reg)
-#define ACCL(reg)		@(0x40,reg)
-#define PSW(reg)		@(0x44,reg)
-#define BPC(reg)		@(0x48,reg)
-#define BBPSW(reg)		@(0x4C,reg)
-#define BBPC(reg)		@(0x50,reg)
-#define SPU(reg)		@(0x54,reg)
-#define FP(reg)			@(0x58,reg)  /* FP = R13 */
-#define LR(reg)			@(0x5C,reg)
-#define SP(reg)			@(0x60,reg)
-#define ORIG_R0(reg)		@(0x64,reg)
-#else
-#error unknown isa configuration
-#endif
 
 CF_MASK		= 0x00000001
 TF_MASK		= 0x00000100
@@ -142,7 +132,7 @@ VM_MASK		= 0x00020000
 #endif
 
 ENTRY(ret_from_fork)
-	ld	r0, @sp+
+	pop	r0
 	bl	schedule_tail
 	GET_THREAD_INFO(r8)
 	bra	syscall_exit
@@ -231,7 +221,7 @@ restore_all:
 	RESTORE_ALL
 
 	# perform work that needs to be done immediately before resumption
-	# r9 : frags
+	# r9 : flags
 	ALIGN
 work_pending:
 	and3	r4, r9, #_TIF_NEED_RESCHED
@@ -320,7 +310,7 @@ ENTRY(ei_handler)
 ;    GET_ICU_STATUS;
 	seth	r0, #shigh(M32R_ICU_ISTS_ADDR)
 	ld	r0, @(low(M32R_ICU_ISTS_ADDR),r0)
-	st	r0, @-sp
+	push	r0
 #if defined(CONFIG_SMP)
 	/*
 	 * If IRQ == 0      --> Nothing to do,  Not write IMASK
@@ -557,7 +547,7 @@ check_end:
 #endif  /* CONFIG_PLAT_M32104UT */
 	bl	do_IRQ
 #endif  /* CONFIG_SMP */
-	ld	r14, @sp+
+	pop	r14
 	seth	r0, #shigh(M32R_ICU_IMASK_ADDR)
 	st	r14, @(low(M32R_ICU_IMASK_ADDR),r0)
 #else
@@ -1015,4 +1005,3 @@ ENTRY(sys_call_table)
 	.long sys_waitid
 
 syscall_table_size=(.-sys_call_table)
-
diff --git a/arch/m32r/kernel/process.c b/arch/m32r/kernel/process.c
index 5dfc7ea45cf7..065f5e719058 100644
--- a/arch/m32r/kernel/process.c
+++ b/arch/m32r/kernel/process.c
@@ -116,6 +116,10 @@ void cpu_idle (void)
 
 void machine_restart(char *__unused)
 {
+#if defined(CONFIG_PLAT_MAPPI3)
+	outw(1, (unsigned long)PLD_REBOOT);
+#endif
+
 	printk("Please push reset button!\n");
 	while (1)
 		cpu_relax();
diff --git a/arch/m32r/kernel/signal.c b/arch/m32r/kernel/signal.c
index cb33097fefc4..6498ee70bb73 100644
--- a/arch/m32r/kernel/signal.c
+++ b/arch/m32r/kernel/signal.c
@@ -118,6 +118,8 @@ restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc,
 #elif defined(CONFIG_ISA_M32R2) || defined(CONFIG_ISA_M32R)
 	COPY(acch);
 	COPY(accl);
+	COPY(dummy_acc1h);
+	COPY(dummy_acc1l);
 #else
 #error unknown isa configuration
 #endif
@@ -203,6 +205,8 @@ setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs,
 #elif defined(CONFIG_ISA_M32R2) || defined(CONFIG_ISA_M32R)
 	COPY(acch);
 	COPY(accl);
+	COPY(dummy_acc1h);
+	COPY(dummy_acc1l);
 #else
 #error unknown isa configuration
 #endif
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 7aec60d40420..e8ff09fe73d9 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -13,7 +13,7 @@ choice
 	default SGI_IP22
 
 config MIPS_MTX1
-	bool "Support for 4G Systems MTX-1 board"
+	bool "4G Systems MTX-1 board"
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
 	select SOC_AU1500
@@ -120,7 +120,7 @@ config MIPS_MIRAGE
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 
 config MIPS_COBALT
-	bool "Support for Cobalt Server"
+	bool "Cobalt Server"
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
 	select I8259
@@ -132,7 +132,7 @@ config MIPS_COBALT
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 
 config MACH_DECSTATION
-	bool "Support for DECstations"
+	bool "DECstations"
 	select BOOT_ELF32
 	select DMA_NONCOHERENT
 	select EARLY_PRINTK
@@ -158,7 +158,7 @@ config MACH_DECSTATION
 	  otherwise choose R3000.
 
 config MIPS_EV64120
-	bool "Support for Galileo EV64120 Evaluation board (EXPERIMENTAL)"
+	bool "Galileo EV64120 Evaluation board (EXPERIMENTAL)"
 	depends on EXPERIMENTAL
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
@@ -175,7 +175,7 @@ config MIPS_EV64120
 	  kernel for this platform.
 
 config MIPS_EV96100
-	bool "Support for Galileo EV96100 Evaluation board (EXPERIMENTAL)"
+	bool "Galileo EV96100 Evaluation board (EXPERIMENTAL)"
 	depends on EXPERIMENTAL
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
@@ -195,7 +195,7 @@ config MIPS_EV96100
 	  here if you wish to build a kernel for this platform.
 
 config MIPS_IVR
-	bool "Support for Globespan IVR board"
+	bool "Globespan IVR board"
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
 	select ITE_BOARD_GEN
@@ -211,7 +211,7 @@ config MIPS_IVR
 	  build a kernel for this platform.
 
 config MIPS_ITE8172
-	bool "Support for ITE 8172G board"
+	bool "ITE 8172G board"
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
 	select ITE_BOARD_GEN
@@ -228,7 +228,7 @@ config MIPS_ITE8172
 	  a kernel for this platform.
 
 config MACH_JAZZ
-	bool "Support for the Jazz family of machines"
+	bool "Jazz family of machines"
 	select ARC
 	select ARC32
 	select ARCH_MAY_HAVE_PC_FDC
@@ -246,7 +246,7 @@ config MACH_JAZZ
 	 Olivetti M700-10 workstations.
 
 config LASAT
-	bool "Support for LASAT Networks platforms"
+	bool "LASAT Networks platforms"
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
 	select MIPS_GT64120
@@ -258,7 +258,7 @@ config LASAT
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 
 config MIPS_ATLAS
-	bool "Support for MIPS Atlas board"
+	bool "MIPS Atlas board"
 	select BOOT_ELF32
 	select DMA_NONCOHERENT
 	select IRQ_CPU
@@ -283,7 +283,7 @@ config MIPS_ATLAS
 	  board.
 
 config MIPS_MALTA
-	bool "Support for MIPS Malta board"
+	bool "MIPS Malta board"
 	select ARCH_MAY_HAVE_PC_FDC
 	select BOOT_ELF32
 	select HAVE_STD_PC_SERIAL_PORT
@@ -311,7 +311,7 @@ config MIPS_MALTA
 	  board.
 
 config MIPS_SEAD
-	bool "Support for MIPS SEAD board (EXPERIMENTAL)"
+	bool "MIPS SEAD board (EXPERIMENTAL)"
 	depends on EXPERIMENTAL
 	select IRQ_CPU
 	select DMA_NONCOHERENT
@@ -328,7 +328,7 @@ config MIPS_SEAD
 	  board.
 
 config MIPS_SIM
-	bool 'Support for MIPS simulator (MIPSsim)'
+	bool 'MIPS simulator (MIPSsim)'
 	select DMA_NONCOHERENT
 	select IRQ_CPU
 	select SYS_HAS_CPU_MIPS32_R1
@@ -341,7 +341,7 @@ config MIPS_SIM
 	  emulator.
 
 config MOMENCO_JAGUAR_ATX
-	bool "Support for Momentum Jaguar board"
+	bool "Momentum Jaguar board"
 	select BOOT_ELF32
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
@@ -361,7 +361,7 @@ config MOMENCO_JAGUAR_ATX
 	  Momentum Computer <http://www.momenco.com/>.
 
 config MOMENCO_OCELOT
-	bool "Support for Momentum Ocelot board"
+	bool "Momentum Ocelot board"
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
 	select IRQ_CPU
@@ -378,7 +378,7 @@ config MOMENCO_OCELOT
 	  Momentum Computer <http://www.momenco.com/>.
 
 config MOMENCO_OCELOT_3
-	bool "Support for Momentum Ocelot-3 board"
+	bool "Momentum Ocelot-3 board"
 	select BOOT_ELF32
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
@@ -397,7 +397,7 @@ config MOMENCO_OCELOT_3
 	  PMC-Sierra Rm79000 core.
 
 config MOMENCO_OCELOT_C
-	bool "Support for Momentum Ocelot-C board"
+	bool "Momentum Ocelot-C board"
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
 	select IRQ_CPU
@@ -414,7 +414,7 @@ config MOMENCO_OCELOT_C
 	  Momentum Computer <http://www.momenco.com/>.
 
 config MOMENCO_OCELOT_G
-	bool "Support for Momentum Ocelot-G board"
+	bool "Momentum Ocelot-G board"
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
 	select IRQ_CPU
@@ -431,23 +431,23 @@ config MOMENCO_OCELOT_G
 	  Momentum Computer <http://www.momenco.com/>.
 
 config MIPS_XXS1500
-	bool "Support for MyCable XXS1500 board"
+	bool "MyCable XXS1500 board"
 	select DMA_NONCOHERENT
 	select SOC_AU1500
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 
 config PNX8550_V2PCI
-	bool "Support for Philips PNX8550 based Viper2-PCI board"
+	bool "Philips PNX8550 based Viper2-PCI board"
 	select PNX8550
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 
 config PNX8550_JBS
-	bool "Support for Philips PNX8550 based JBS board"
+	bool "Philips PNX8550 based JBS board"
 	select PNX8550
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 
 config DDB5074
-	bool "Support for NEC DDB Vrc-5074 (EXPERIMENTAL)"
+	bool "NEC DDB Vrc-5074 (EXPERIMENTAL)"
 	depends on EXPERIMENTAL
 	select DDB5XXX_COMMON
 	select DMA_NONCOHERENT
@@ -465,7 +465,7 @@ config DDB5074
 	  evaluation board.
 
 config DDB5476
-	bool "Support for NEC DDB Vrc-5476"
+	bool "NEC DDB Vrc-5476"
 	select DDB5XXX_COMMON
 	select DMA_NONCOHERENT
 	select HAVE_STD_PC_SERIAL_PORT
@@ -486,7 +486,7 @@ config DDB5476
 	  IDE controller, PS2 keyboard, PS2 mouse, etc.
 
 config DDB5477
-	bool "Support for NEC DDB Vrc-5477"
+	bool "NEC DDB Vrc-5477"
 	select DDB5XXX_COMMON
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
@@ -504,13 +504,13 @@ config DDB5477
 	  ether port USB, AC97, PCI, etc.
 
 config MACH_VR41XX
-	bool "Support for NEC VR4100 series based machines"
+	bool "NEC VR41XX-based machines"
 	select SYS_HAS_CPU_VR41XX
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
 
 config PMC_YOSEMITE
-	bool "Support for PMC-Sierra Yosemite eval board"
+	bool "PMC-Sierra Yosemite eval board"
 	select DMA_COHERENT
 	select HW_HAS_PCI
 	select IRQ_CPU
@@ -527,7 +527,7 @@ config PMC_YOSEMITE
 	  manufactured by PMC-Sierra.
 
 config QEMU
-	bool "Support for Qemu"
+	bool "Qemu"
 	select DMA_COHERENT
 	select GENERIC_ISA_DMA
 	select HAVE_STD_PC_SERIAL_PORT
@@ -547,7 +547,7 @@ config QEMU
 	  can be found at http://www.linux-mips.org/wiki/Qemu.
 
 config SGI_IP22
-	bool "Support for SGI IP22 (Indy/Indigo2)"
+	bool "SGI IP22 (Indy/Indigo2)"
 	select ARC
 	select ARC32
 	select BOOT_ELF32
@@ -567,7 +567,7 @@ config SGI_IP22
 	  that runs on these, say Y here.
 
 config SGI_IP27
-	bool "Support for SGI IP27 (Origin200/2000)"
+	bool "SGI IP27 (Origin200/2000)"
 	select ARC
 	select ARC64
 	select BOOT_ELF64
@@ -583,7 +583,7 @@ config SGI_IP27
 	  here.
 
 config SGI_IP32
-	bool "Support for SGI IP32 (O2) (EXPERIMENTAL)"
+	bool "SGI IP32 (O2) (EXPERIMENTAL)"
 	depends on EXPERIMENTAL
 	select ARC
 	select ARC32
@@ -604,7 +604,7 @@ config SGI_IP32
 	  If you want this kernel to run on SGI O2 workstation, say Y here.
 
 config SIBYTE_BIGSUR
-	bool "Support for Sibyte BCM91480B-BigSur"
+	bool "Sibyte BCM91480B-BigSur"
 	select BOOT_ELF32
 	select DMA_COHERENT
 	select PCI_DOMAINS
@@ -615,7 +615,7 @@ config SIBYTE_BIGSUR
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 
 config SIBYTE_SWARM
-	bool "Support for Sibyte BCM91250A-SWARM"
+	bool "Sibyte BCM91250A-SWARM"
 	select BOOT_ELF32
 	select DMA_COHERENT
 	select SIBYTE_SB1250
@@ -626,7 +626,7 @@ config SIBYTE_SWARM
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 
 config SIBYTE_SENTOSA
-	bool "Support for Sibyte BCM91250E-Sentosa"
+	bool "Sibyte BCM91250E-Sentosa"
 	depends on EXPERIMENTAL
 	select BOOT_ELF32
 	select DMA_COHERENT
@@ -637,7 +637,7 @@ config SIBYTE_SENTOSA
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 
 config SIBYTE_RHONE
-	bool "Support for Sibyte BCM91125E-Rhone"
+	bool "Sibyte BCM91125E-Rhone"
 	depends on EXPERIMENTAL
 	select BOOT_ELF32
 	select DMA_COHERENT
@@ -648,7 +648,7 @@ config SIBYTE_RHONE
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 
 config SIBYTE_CARMEL
-	bool "Support for Sibyte BCM91120x-Carmel"
+	bool "Sibyte BCM91120x-Carmel"
 	depends on EXPERIMENTAL
 	select BOOT_ELF32
 	select DMA_COHERENT
@@ -659,7 +659,7 @@ config SIBYTE_CARMEL
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 
 config SIBYTE_PTSWARM
-	bool "Support for Sibyte BCM91250PT-PTSWARM"
+	bool "Sibyte BCM91250PT-PTSWARM"
 	depends on EXPERIMENTAL
 	select BOOT_ELF32
 	select DMA_COHERENT
@@ -671,7 +671,7 @@ config SIBYTE_PTSWARM
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 
 config SIBYTE_LITTLESUR
-	bool "Support for Sibyte BCM91250C2-LittleSur"
+	bool "Sibyte BCM91250C2-LittleSur"
 	depends on EXPERIMENTAL
 	select BOOT_ELF32
 	select DMA_COHERENT
@@ -683,7 +683,7 @@ config SIBYTE_LITTLESUR
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 
 config SIBYTE_CRHINE
-	bool "Support for Sibyte BCM91120C-CRhine"
+	bool "Sibyte BCM91120C-CRhine"
 	depends on EXPERIMENTAL
 	select BOOT_ELF32
 	select DMA_COHERENT
@@ -694,7 +694,7 @@ config SIBYTE_CRHINE
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 
 config SIBYTE_CRHONE
-	bool "Support for Sibyte BCM91125C-CRhone"
+	bool "Sibyte BCM91125C-CRhone"
 	depends on EXPERIMENTAL
 	select BOOT_ELF32
 	select DMA_COHERENT
@@ -706,7 +706,7 @@ config SIBYTE_CRHONE
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 
 config SNI_RM200_PCI
-	bool "Support for SNI RM200 PCI"
+	bool "SNI RM200 PCI"
 	select ARC
 	select ARC32
 	select ARCH_MAY_HAVE_PC_FDC
@@ -732,7 +732,7 @@ config SNI_RM200_PCI
 	  support this machine type.
 
 config TOSHIBA_JMR3927
-	bool "Support for Toshiba JMR-TX3927 board"
+	bool "Toshiba JMR-TX3927 board"
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
 	select MIPS_TX3927
@@ -743,7 +743,7 @@ config TOSHIBA_JMR3927
 	select TOSHIBA_BOARDS
 
 config TOSHIBA_RBTX4927
-	bool "Support for Toshiba TBTX49[23]7 board"
+	bool "Toshiba TBTX49[23]7 board"
 	select DMA_NONCOHERENT
 	select HAS_TXX9_SERIAL
 	select HW_HAS_PCI
@@ -760,7 +760,7 @@ config TOSHIBA_RBTX4927
 	  support this machine type
 
 config TOSHIBA_RBTX4938
-	bool "Support for Toshiba RBTX4938 board"
+	bool "Toshiba RBTX4938 board"
 	select HAVE_STD_PC_SERIAL_PORT
 	select DMA_NONCOHERENT
 	select GENERIC_ISA_DMA
@@ -816,6 +816,10 @@ config GENERIC_CALIBRATE_DELAY
 	bool
 	default y
 
+config SCHED_NO_NO_OMIT_FRAME_POINTER
+	bool
+	default y
+
 #
 # Select some configuration options automatically based on user selections.
 #
@@ -1063,6 +1067,7 @@ choice
 config CPU_MIPS32_R1
 	bool "MIPS32 Release 1"
 	depends on SYS_HAS_CPU_MIPS32_R1
+	select CPU_HAS_LLSC
 	select CPU_HAS_PREFETCH
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_HIGHMEM
@@ -1080,6 +1085,7 @@ config CPU_MIPS32_R1
 config CPU_MIPS32_R2
 	bool "MIPS32 Release 2"
 	depends on SYS_HAS_CPU_MIPS32_R2
+	select CPU_HAS_LLSC
 	select CPU_HAS_PREFETCH
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_HIGHMEM
@@ -1093,6 +1099,7 @@ config CPU_MIPS32_R2
 config CPU_MIPS64_R1
 	bool "MIPS64 Release 1"
 	depends on SYS_HAS_CPU_MIPS64_R1
+	select CPU_HAS_LLSC
 	select CPU_HAS_PREFETCH
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_64BIT_KERNEL
@@ -1111,6 +1118,7 @@ config CPU_MIPS64_R1
 config CPU_MIPS64_R2
 	bool "MIPS64 Release 2"
 	depends on SYS_HAS_CPU_MIPS64_R2
+	select CPU_HAS_LLSC
 	select CPU_HAS_PREFETCH
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_64BIT_KERNEL
@@ -1125,6 +1133,7 @@ config CPU_MIPS64_R2
 config CPU_R3000
 	bool "R3000"
 	depends on SYS_HAS_CPU_R3000
+	select CPU_HAS_WB
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_HIGHMEM
 	help
@@ -1154,6 +1163,7 @@ config CPU_VR41XX
 config CPU_R4300
 	bool "R4300"
 	depends on SYS_HAS_CPU_R4300
+	select CPU_HAS_LLSC
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_64BIT_KERNEL
 	help
@@ -1162,6 +1172,7 @@ config CPU_R4300
 config CPU_R4X00
 	bool "R4x00"
 	depends on SYS_HAS_CPU_R4X00
+	select CPU_HAS_LLSC
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_64BIT_KERNEL
 	help
@@ -1171,6 +1182,7 @@ config CPU_R4X00
 config CPU_TX49XX
 	bool "R49XX"
 	depends on SYS_HAS_CPU_TX49XX
+	select CPU_HAS_LLSC
 	select CPU_HAS_PREFETCH
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_64BIT_KERNEL
@@ -1178,6 +1190,7 @@ config CPU_TX49XX
 config CPU_R5000
 	bool "R5000"
 	depends on SYS_HAS_CPU_R5000
+	select CPU_HAS_LLSC
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_64BIT_KERNEL
 	help
@@ -1186,12 +1199,14 @@ config CPU_R5000
 config CPU_R5432
 	bool "R5432"
 	depends on SYS_HAS_CPU_R5432
+	select CPU_HAS_LLSC
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_64BIT_KERNEL
 
 config CPU_R6000
 	bool "R6000"
 	depends on EXPERIMENTAL
+	select CPU_HAS_LLSC
 	depends on SYS_HAS_CPU_R6000
 	select CPU_SUPPORTS_32BIT_KERNEL
 	help
@@ -1201,6 +1216,7 @@ config CPU_R6000
 config CPU_NEVADA
 	bool "RM52xx"
 	depends on SYS_HAS_CPU_NEVADA
+	select CPU_HAS_LLSC
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_64BIT_KERNEL
 	help
@@ -1210,6 +1226,7 @@ config CPU_R8000
 	bool "R8000"
 	depends on EXPERIMENTAL
 	depends on SYS_HAS_CPU_R8000
+	select CPU_HAS_LLSC
 	select CPU_HAS_PREFETCH
 	select CPU_SUPPORTS_64BIT_KERNEL
 	help
@@ -1219,6 +1236,7 @@ config CPU_R8000
 config CPU_R10000
 	bool "R10000"
 	depends on SYS_HAS_CPU_R10000
+	select CPU_HAS_LLSC
 	select CPU_HAS_PREFETCH
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_64BIT_KERNEL
@@ -1229,6 +1247,7 @@ config CPU_R10000
 config CPU_RM7000
 	bool "RM7000"
 	depends on SYS_HAS_CPU_RM7000
+	select CPU_HAS_LLSC
 	select CPU_HAS_PREFETCH
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_64BIT_KERNEL
@@ -1237,6 +1256,7 @@ config CPU_RM7000
 config CPU_RM9000
 	bool "RM9000"
 	depends on SYS_HAS_CPU_RM9000
+	select CPU_HAS_LLSC
 	select CPU_HAS_PREFETCH
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_64BIT_KERNEL
@@ -1245,6 +1265,7 @@ config CPU_RM9000
 config CPU_SB1
 	bool "SB1"
 	depends on SYS_HAS_CPU_SB1
+	select CPU_HAS_LLSC
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_64BIT_KERNEL
 	select CPU_SUPPORTS_HIGHMEM
@@ -1390,13 +1411,12 @@ config PAGE_SIZE_8KB
 
 config PAGE_SIZE_16KB
 	bool "16kB"
-	depends on EXPERIMENTAL && !CPU_R3000 && !CPU_TX39XX
+	depends on !CPU_R3000 && !CPU_TX39XX
 	help
 	  Using 16kB page size will result in higher performance kernel at
 	  the price of higher memory consumption.  This option is available on
-	  all non-R3000 family processor.  Not that at the time of this
-	  writing this option is still high experimental; there are also
-	  issues with compatibility of user applications.
+	  all non-R3000 family processors.  Note that you will need a suitable
+	  Linux distribution to support this.
 
 config PAGE_SIZE_64KB
 	bool "64kB"
@@ -1405,8 +1425,7 @@ config PAGE_SIZE_64KB
 	  Using 64kB page size will result in higher performance kernel at
 	  the price of higher memory consumption.  This option is available on
 	  all non-R3000 family processor.  Not that at the time of this
-	  writing this option is still high experimental; there are also
-	  issues with compatibility of user applications.
+	  writing this option is still high experimental.
 
 endchoice
 
@@ -1443,6 +1462,12 @@ choice
 	prompt "MIPS MT options"
 	depends on MIPS_MT
 
+config MIPS_MT_SMTC
+	bool "SMTC: Use all TCs on all VPEs for SMP"
+	select CPU_MIPSR2_IRQ_VI
+	select CPU_MIPSR2_SRS
+	select SMP
+
 config MIPS_MT_SMP
 	bool "Use 1 TC on each available VPE for SMP"
 	select SMP
@@ -1456,6 +1481,11 @@ config MIPS_VPE_LOADER
 
 endchoice
 
+config MIPS_MT_FPAFF
+	bool "Dynamic FPU affinity for FP-intensive threads"
+	depends on MIPS_MT
+	default y
+
 config MIPS_VPE_LOADER_TOM
 	bool "Load VPE program into memory hidden from linux"
 	depends on MIPS_VPE_LOADER
@@ -1472,6 +1502,16 @@ config MIPS_VPE_APSP_API
 	depends on MIPS_VPE_LOADER
 	help
 
+config MIPS_APSP_KSPD
+	bool "Enable KSPD"
+	depends on MIPS_VPE_APSP_API
+	default y
+	help
+	  KSPD is a kernel daemon that accepts syscall requests from the SP
+	  side, actions them and returns the results. It also handles the
+	  "exit" syscall notifying other kernel modules the SP program is
+	  exiting.  You probably want to say yes here.
+
 config SB1_PASS_1_WORKAROUNDS
 	bool
 	depends on CPU_SB1_PASS_1
@@ -1491,38 +1531,15 @@ config 64BIT_PHYS_ADDR
 	bool "Support for 64-bit physical address space"
 	depends on (CPU_R4X00 || CPU_R5000 || CPU_RM7000 || CPU_RM9000 || CPU_R10000 || CPU_SB1 || CPU_MIPS32 || CPU_MIPS64) && 32BIT
 
-config CPU_ADVANCED
-	bool "Override CPU Options"
-	depends on 32BIT
-	help
-	  Saying yes here allows you to select support for various features
-	  your CPU may or may not have.  Most people should say N here.
-
 config CPU_HAS_LLSC
-	bool "ll/sc Instructions available" if CPU_ADVANCED
-	default y if !CPU_ADVANCED && !CPU_R3000 && !CPU_VR41XX && !CPU_TX39XX
-	help
-	  MIPS R4000 series and later provide the Load Linked (ll)
-	  and Store Conditional (sc) instructions. More information is
-	  available at <http://www.go-ecs.com/mips/miptek1.htm>.
-
-	  Say Y here if your CPU has the ll and sc instructions.  Say Y here
-	  for better performance, N if you don't know.  You must say Y here
-	  for multiprocessor machines.
+	bool
 
 config CPU_HAS_WB
-	bool "Writeback Buffer available" if CPU_ADVANCED
-	default y if !CPU_ADVANCED && CPU_R3000 && MACH_DECSTATION
-	help
-	  Say N here for slightly better performance.  You must say Y here for
-	  machines which require flushing of write buffers in software.  Saying
-	  Y is the safe option; N may result in kernel malfunction and crashes.
-
-menu "MIPSR2 Interrupt handling"
-	depends on CPU_MIPSR2 && CPU_ADVANCED
+	bool
 
 config CPU_MIPSR2_IRQ_VI
 	bool "Vectored interrupt mode"
+	depends on CPU_MIPSR2
 	help
 	   Vectored interrupt mode allowing faster dispatching of interrupts.
 	   The board support code needs to be written to take advantage of this
@@ -1532,6 +1549,7 @@ config CPU_MIPSR2_IRQ_VI
 
 config CPU_MIPSR2_IRQ_EI
 	bool "External interrupt controller mode"
+	depends on CPU_MIPSR2
 	help
 	   Extended interrupt mode takes advantage of an external interrupt
 	   controller to allow fast dispatching from many possible interrupt
@@ -1545,7 +1563,6 @@ config CPU_MIPSR2_SRS
 	   Allow the kernel to use shadow register sets for fast interrupts.
 	   Interrupt handlers must be specially written to use shadow sets.
 	   Say N unless you know that shadow register set upport is needed.
-endmenu
 
 config CPU_HAS_SYNC
 	bool
@@ -1599,7 +1616,7 @@ source "mm/Kconfig"
 
 config SMP
 	bool "Multi-Processing support"
-	depends on CPU_RM9000 || ((SIBYTE_BCM1x80 || SIBYTE_BCM1x55 || SIBYTE_SB1250 || QEMU) && !SIBYTE_STANDALONE) || SGI_IP27 || MIPS_MT_SMP
+	depends on CPU_RM9000 || ((SIBYTE_BCM1x80 || SIBYTE_BCM1x55 || SIBYTE_SB1250 || QEMU) && !SIBYTE_STANDALONE) || SGI_IP27 || MIPS_MT_SMP || MIPS_MT_SMTC
 	---help---
 	  This enables support for systems with more than one CPU. If you have
 	  a system with only one CPU, like most personal computers, say N. If
diff --git a/arch/mips/Kconfig.debug b/arch/mips/Kconfig.debug
index d3c5cc3b9c9d..515f9e611307 100644
--- a/arch/mips/Kconfig.debug
+++ b/arch/mips/Kconfig.debug
@@ -6,7 +6,13 @@ config CROSSCOMPILE
 	bool "Are you using a crosscompiler"
 	help
 	  Say Y here if you are compiling the kernel on a different
-	  architecture than the one it is intended to run on.
+	  architecture than the one it is intended to run on.  This is just a
+	  convenience option which will select the appropriate value for
+	  the CROSS_COMPILE make variable which otherwise has to be passed on
+	  the command line from mips-linux-, mipsel-linux-, mips64-linux- and
+	  mips64el-linux- as appropriate for a particular kernel configuration.
+	  You will have to pass the value for CROSS_COMPILE manually if the
+	  name prefix for your tools is different.
 
 config CMDLINE
 	string "Default kernel command string"
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index 9a69e0f0ab76..133900aca992 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -105,18 +105,18 @@ cflags-$(CONFIG_CPU_R4300)	+= -march=r4300 -Wa,--trap
 cflags-$(CONFIG_CPU_VR41XX)	+= -march=r4100 -Wa,--trap
 cflags-$(CONFIG_CPU_R4X00)	+= -march=r4600 -Wa,--trap
 cflags-$(CONFIG_CPU_TX49XX)	+= -march=r4600 -Wa,--trap
-cflags-$(CONFIG_CPU_MIPS32_R1)	+= $(call cc-option,-march=mips32,-mips2 -mtune=r4600) \
+cflags-$(CONFIG_CPU_MIPS32_R1)	+= $(call cc-option,-march=mips32,-mips32 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS32) \
 			-Wa,-mips32 -Wa,--trap
-cflags-$(CONFIG_CPU_MIPS32_R2)	+= $(call cc-option,-march=mips32r2,-mips2 -mtune=r4600) \
+cflags-$(CONFIG_CPU_MIPS32_R2)	+= $(call cc-option,-march=mips32r2,-mips32r2 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS32) \
 			-Wa,-mips32r2 -Wa,--trap
-cflags-$(CONFIG_CPU_MIPS64_R1)	+= $(call cc-option,-march=mips64,-mips2 -mtune=r4600) \
+cflags-$(CONFIG_CPU_MIPS64_R1)	+= $(call cc-option,-march=mips64,-mips64 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS64) \
 			-Wa,-mips64 -Wa,--trap
-cflags-$(CONFIG_CPU_MIPS64_R2)	+= $(call cc-option,-march=mips64r2,-mips2 -mtune=r4600 ) \
+cflags-$(CONFIG_CPU_MIPS64_R2)	+= $(call cc-option,-march=mips64r2,-mips64r2 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS64) \
 			-Wa,-mips64r2 -Wa,--trap
 cflags-$(CONFIG_CPU_R5000)	+= -march=r5000 -Wa,--trap
-cflags-$(CONFIG_CPU_R5432)	+= $(call cc-options,-march=r5400,-march=r5000) \
+cflags-$(CONFIG_CPU_R5432)	+= $(call cc-option,-march=r5400,-march=r5000) \
 			-Wa,--trap
-cflags-$(CONFIG_CPU_NEVADA)	+= $(call cc-options,-march=rm5200,-march=r5000) \
+cflags-$(CONFIG_CPU_NEVADA)	+= $(call cc-option,-march=rm5200,-march=r5000) \
 			-Wa,--trap
 cflags-$(CONFIG_CPU_RM7000)	+= $(call cc-option,-march=rm7000,-march=r5000) \
 			-Wa,--trap
@@ -615,7 +615,10 @@ LDFLAGS			+= -m $(ld-emul)
 ifdef CONFIG_MIPS
 CHECKFLAGS += $(shell $(CC) $(CFLAGS) -dM -E -xc /dev/null | \
 	egrep -vw '__GNUC_(MAJOR|MINOR|PATCHLEVEL)__' | \
-	sed -e 's/^\#define /-D/' -e 's/ /="/' -e 's/$$/"/')
+	sed -e 's/^\#define /-D/' -e "s/ /='/" -e "s/$$/'/")
+ifdef CONFIG_64BIT
+CHECKFLAGS		+= -m64
+endif
 endif
 
 OBJCOPYFLAGS		+= --remove-section=.reginfo
diff --git a/arch/mips/au1000/common/Makefile b/arch/mips/au1000/common/Makefile
index a1edfd1f643c..bf682f50b859 100644
--- a/arch/mips/au1000/common/Makefile
+++ b/arch/mips/au1000/common/Makefile
@@ -6,7 +6,7 @@
 # Makefile for the Alchemy Au1000 CPU, generic files.
 #
 
-obj-y += prom.o int-handler.o irq.o puts.o time.o reset.o \
+obj-y += prom.o irq.o puts.o time.o reset.o \
 	au1xxx_irqmap.o clocks.o platform.o power.o setup.o \
 	sleeper.o cputable.o dma.o dbdma.o gpio.o
 
diff --git a/arch/mips/au1000/common/int-handler.S b/arch/mips/au1000/common/int-handler.S
deleted file mode 100644
index 1c4ca883321e..000000000000
--- a/arch/mips/au1000/common/int-handler.S
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * Copyright 2001 MontaVista Software Inc.
- * Author: ppopov@mvista.com
- *
- * Interrupt dispatcher for Au1000 boards.
- *
- * This program is free software; you can redistribute	it and/or modify it
- * under  the terms of	the GNU General	 Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#include <asm/asm.h>
-#include <asm/mipsregs.h>
-#include <asm/addrspace.h>
-#include <asm/regdef.h>
-#include <asm/stackframe.h>
-
-	.text
-	.set	macro
-	.set	noat
-	.align	5
-
-NESTED(au1000_IRQ, PT_SIZE, sp)
-	SAVE_ALL
-	CLI				# Important: mark KERNEL mode !
-
-	mfc0	t0,CP0_CAUSE		# get pending interrupts
-	mfc0	t1,CP0_STATUS		# get enabled interrupts
-	and	t0,t1			# isolate allowed ones
-
-	andi	t0,0xff00		# isolate pending bits
-	beqz	t0, 3f			# spurious interrupt
-
-	andi	a0, t0, CAUSEF_IP7
-	beq	a0, zero, 1f
-	move	a0, sp
-	jal	mips_timer_interrupt
-	j	ret_from_irq
-
-1:
-	andi	a0, t0, CAUSEF_IP2	# Interrupt Controller 0, Request 0
-	beq	a0, zero, 2f
-	move	a0,sp
-	jal	intc0_req0_irqdispatch
-	j	ret_from_irq
-2:
-	andi	a0, t0, CAUSEF_IP3	# Interrupt Controller 0, Request 1
-	beq	a0, zero, 3f
-	move	a0,sp
-	jal	intc0_req1_irqdispatch
-	j	ret_from_irq
-3:
-	andi	a0, t0, CAUSEF_IP4	# Interrupt Controller 1, Request 0
-	beq	a0, zero, 4f
-	move	a0,sp
-	jal	intc1_req0_irqdispatch
-	j	ret_from_irq
-4:
-	andi	a0, t0, CAUSEF_IP5	# Interrupt Controller 1, Request 1
-	beq	a0, zero, 5f
-	move	a0, sp
-	jal	intc1_req1_irqdispatch
-	j	ret_from_irq
-
-5:
-	move	a0, sp
-	j	spurious_interrupt
-END(au1000_IRQ)
diff --git a/arch/mips/au1000/common/irq.c b/arch/mips/au1000/common/irq.c
index 1339a0979f66..afe05ec12c27 100644
--- a/arch/mips/au1000/common/irq.c
+++ b/arch/mips/au1000/common/irq.c
@@ -66,9 +66,9 @@
 #define EXT_INTC1_REQ1 5 /* IP 5 */
 #define MIPS_TIMER_IP  7 /* IP 7 */
 
-extern asmlinkage void au1000_IRQ(void);
 extern void set_debug_traps(void);
 extern irq_cpustat_t irq_stat [NR_CPUS];
+extern void mips_timer_interrupt(struct pt_regs *regs);
 
 static void setup_local_irq(unsigned int irq, int type, int int_req);
 static unsigned int startup_irq(unsigned int irq);
@@ -446,7 +446,6 @@ void __init arch_init_irq(void)
 	extern int au1xxx_ic0_nr_irqs;
 
 	cp0_status = read_c0_status();
-	set_except_vector(0, au1000_IRQ);
 
 	/* Initialize interrupt controllers to a safe state.
 	*/
@@ -661,3 +660,21 @@ restore_au1xxx_intctl(void)
 	au_writel(sleep_intctl_mask[0], IC0_MASKSET); au_sync();
 }
 #endif /* CONFIG_PM */
+
+asmlinkage void plat_irq_dispatch(struct pt_regs *regs)
+{
+	unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM;
+
+	if (pending & CAUSEF_IP7)
+		mips_timer_interrupt(regs);
+	else if (pending & CAUSEF_IP2)
+		intc0_req0_irqdispatch(regs);
+	else if (pending & CAUSEF_IP3)
+		intc0_req1_irqdispatch(regs);
+	else if (pending & CAUSEF_IP4)
+		intc1_req0_irqdispatch(regs);
+	else if (pending  & CAUSEF_IP5)
+		intc1_req1_irqdispatch(regs);
+	else
+		spurious_interrupt(regs);
+}
diff --git a/arch/mips/au1000/common/prom.c b/arch/mips/au1000/common/prom.c
index 9c171afd9a53..ae7d8c57bf3f 100644
--- a/arch/mips/au1000/common/prom.c
+++ b/arch/mips/au1000/common/prom.c
@@ -1,10 +1,9 @@
 /*
  *
  * BRIEF MODULE DESCRIPTION
- *    PROM library initialisation code, assuming a version of
- *    pmon is the boot code.
+ *    PROM library initialisation code, assuming YAMON is the boot loader.
  *
- * Copyright 2000,2001 MontaVista Software Inc.
+ * Copyright 2000, 2001, 2006 MontaVista Software Inc.
  * Author: MontaVista Software, Inc.
  *         	ppopov@mvista.com or source@mvista.com
  *
@@ -49,9 +48,9 @@ extern char **prom_argv, **prom_envp;
 
 typedef struct
 {
-    char *name;
-/*    char *val; */
-}t_env_var;
+	char *name;
+	char *val;
+} t_env_var;
 
 
 char * prom_getcmdline(void)
@@ -85,21 +84,16 @@ char *prom_getenv(char *envname)
 {
 	/*
 	 * Return a pointer to the given environment variable.
-	 * Environment variables are stored in the form of "memsize=64".
 	 */
 
 	t_env_var *env = (t_env_var *)prom_envp;
-	int i;
-
-	i = strlen(envname);
 
-	while(env->name) {
-		if(strncmp(envname, env->name, i) == 0) {
-			return(env->name + strlen(envname) + 1);
-		}
+	while (env->name) {
+		if (strcmp(envname, env->name) == 0)
+			return env->val;
 		env++;
 	}
-	return(NULL);
+	return NULL;
 }
 
 inline unsigned char str2hexnum(unsigned char c)
diff --git a/arch/mips/au1000/common/sleeper.S b/arch/mips/au1000/common/sleeper.S
index 44dac3b0df3b..683d9da84b66 100644
--- a/arch/mips/au1000/common/sleeper.S
+++ b/arch/mips/au1000/common/sleeper.S
@@ -112,6 +112,11 @@ sdsleep:
 	mtc0	k0, CP0_PAGEMASK
 	lw	k0, 0x14(sp)
 	mtc0	k0, CP0_CONFIG
+
+	/* We need to catch the ealry Alchemy SOCs with
+	 * the write-only Config[OD] bit and set it back to one...
+	 */
+	jal	au1x00_fixup_config_od
 	lw	$1, PT_R1(sp)
 	lw	$2, PT_R2(sp)
 	lw	$3, PT_R3(sp)
diff --git a/arch/mips/au1000/common/time.c b/arch/mips/au1000/common/time.c
index f85f1524b366..f74d66a58a21 100644
--- a/arch/mips/au1000/common/time.c
+++ b/arch/mips/au1000/common/time.c
@@ -116,6 +116,7 @@ void mips_timer_interrupt(struct pt_regs *regs)
 
 null:
 	ack_r4ktimer(0);
+	irq_exit();
 }
 
 #ifdef CONFIG_PM
diff --git a/arch/mips/cobalt/Makefile b/arch/mips/cobalt/Makefile
index 720e757b2b64..225ac8f34ccd 100644
--- a/arch/mips/cobalt/Makefile
+++ b/arch/mips/cobalt/Makefile
@@ -2,7 +2,7 @@
 # Makefile for the Cobalt micro systems family specific parts of the kernel
 #
 
-obj-y	 := irq.o int-handler.o reset.o setup.o
+obj-y	 := irq.o reset.o setup.o
 
 obj-$(CONFIG_EARLY_PRINTK)	+= console.o
 
diff --git a/arch/mips/cobalt/int-handler.S b/arch/mips/cobalt/int-handler.S
deleted file mode 100644
index e75d5e3ca868..000000000000
--- a/arch/mips/cobalt/int-handler.S
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1995, 1996, 1997, 2003 by Ralf Baechle
- * Copyright (C) 2001, 2002, 2003 by Liam Davies (ldavies@agile.tv)
- */
-#include <asm/asm.h>
-#include <asm/mipsregs.h>
-#include <asm/mach-cobalt/cobalt.h>
-#include <asm/regdef.h>
-#include <asm/stackframe.h>
-
-		.text
-		.align	5
-		NESTED(cobalt_handle_int, PT_SIZE, sp)
-		SAVE_ALL
-		CLI
-
-		PTR_LA	ra, ret_from_irq
-		move	a0, sp
-		j	cobalt_irq
-
-		END(cobalt_handle_int)
diff --git a/arch/mips/cobalt/irq.c b/arch/mips/cobalt/irq.c
index f9a108820d6e..0b75f4fb7195 100644
--- a/arch/mips/cobalt/irq.c
+++ b/arch/mips/cobalt/irq.c
@@ -20,8 +20,6 @@
 
 #include <asm/mach-cobalt/cobalt.h>
 
-extern void cobalt_handle_int(void);
-
 /*
  * We have two types of interrupts that we handle, ones that come in through
  * the CPU interrupt lines, and ones that come in on the via chip. The CPU
@@ -79,7 +77,7 @@ static inline void via_pic_irq(struct pt_regs *regs)
 		do_IRQ(irq, regs);
 }
 
-asmlinkage void cobalt_irq(struct pt_regs *regs)
+asmlinkage void plat_irq_dispatch(struct pt_regs *regs)
 {
 	unsigned pending;
 
@@ -122,8 +120,6 @@ void __init arch_init_irq(void)
 	 */
 	GALILEO_OUTL(0, GT_INTRMASK_OFS);
 
-	set_except_vector(0, cobalt_handle_int);
-
 	init_i8259_irqs();				/*  0 ... 15 */
 	mips_cpu_irq_init(COBALT_CPU_IRQ);		/* 16 ... 23 */
 
diff --git a/arch/mips/configs/atlas_defconfig b/arch/mips/configs/atlas_defconfig
index 9e1ae953e966..4b080bcb258f 100644
--- a/arch/mips/configs/atlas_defconfig
+++ b/arch/mips/configs/atlas_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16-rc1
-# Fri Jan 27 15:39:52 2006
+# Linux kernel version: 2.6.17-rc2
+# Mon Apr 24 14:50:55 2006
 #
 CONFIG_MIPS=y
 
@@ -64,6 +64,8 @@ CONFIG_MIPS_ATLAS=y
 # CONFIG_TOSHIBA_RBTX4927 is not set
 # CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
@@ -127,11 +129,11 @@ CONFIG_RM7000_CPU_SCACHE=y
 CONFIG_CPU_HAS_PREFETCH=y
 # CONFIG_MIPS_MT is not set
 # CONFIG_64BIT_PHYS_ADDR is not set
-# CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
@@ -149,7 +151,6 @@ CONFIG_PREEMPT_NONE=y
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 
@@ -165,6 +166,7 @@ CONFIG_SYSVIPC=y
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_RELAY=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EMBEDDED=y
@@ -178,10 +180,6 @@ CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
 CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -193,7 +191,6 @@ CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
@@ -202,6 +199,8 @@ CONFIG_KMOD=y
 # Block layer
 #
 # CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
 
 #
 # IO Schedulers
@@ -221,7 +220,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 #
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
-CONFIG_PCI_LEGACY_PROC=y
 CONFIG_MMU=y
 
 #
@@ -249,6 +247,7 @@ CONFIG_NET=y
 #
 # Networking options
 #
+# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -281,6 +280,7 @@ CONFIG_SYN_COOKIES=y
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
 CONFIG_INET_TUNNEL=m
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
@@ -322,9 +322,12 @@ CONFIG_IP_VS_NQ=m
 CONFIG_IP_VS_FTP=m
 CONFIG_IPV6=m
 CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
+CONFIG_INET6_XFRM_TUNNEL=m
 CONFIG_INET6_TUNNEL=m
 CONFIG_IPV6_TUNNEL=m
 CONFIG_NETFILTER=y
@@ -348,11 +351,14 @@ CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
 CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
 CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
 CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
 CONFIG_NETFILTER_XT_MATCH_HELPER=m
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
 CONFIG_NETFILTER_XT_MATCH_MAC=m
 CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
 CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
 CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
 CONFIG_NETFILTER_XT_MATCH_REALM=m
@@ -376,20 +382,19 @@ CONFIG_IP_NF_IRC=m
 CONFIG_IP_NF_TFTP=m
 CONFIG_IP_NF_AMANDA=m
 CONFIG_IP_NF_PPTP=m
+CONFIG_IP_NF_H323=m
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
 CONFIG_IP_NF_MATCH_TOS=m
 CONFIG_IP_NF_MATCH_RECENT=m
 CONFIG_IP_NF_MATCH_ECN=m
 CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
+CONFIG_IP_NF_MATCH_AH=m
 CONFIG_IP_NF_MATCH_TTL=m
 CONFIG_IP_NF_MATCH_OWNER=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
 CONFIG_IP_NF_MATCH_HASHLIMIT=m
-CONFIG_IP_NF_MATCH_POLICY=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
@@ -407,6 +412,7 @@ CONFIG_IP_NF_NAT_FTP=m
 CONFIG_IP_NF_NAT_TFTP=m
 CONFIG_IP_NF_NAT_AMANDA=m
 CONFIG_IP_NF_NAT_PPTP=m
+CONFIG_IP_NF_NAT_H323=m
 CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_TOS=m
 CONFIG_IP_NF_TARGET_ECN=m
@@ -427,12 +433,10 @@ CONFIG_IP6_NF_MATCH_RT=m
 CONFIG_IP6_NF_MATCH_OPTS=m
 CONFIG_IP6_NF_MATCH_FRAG=m
 CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_MULTIPORT=m
 CONFIG_IP6_NF_MATCH_OWNER=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AHESP=m
+CONFIG_IP6_NF_MATCH_AH=m
 CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_MATCH_POLICY=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_LOG=m
 CONFIG_IP6_NF_TARGET_REJECT=m
@@ -478,6 +482,11 @@ CONFIG_IP_SCTP=m
 # CONFIG_SCTP_HMAC_NONE is not set
 # CONFIG_SCTP_HMAC_SHA1 is not set
 CONFIG_SCTP_HMAC_MD5=y
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 CONFIG_BRIDGE=m
 CONFIG_VLAN_8021Q=m
@@ -492,11 +501,6 @@ CONFIG_IPDDP_ENCAP=y
 CONFIG_IPDDP_DECAP=y
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
 CONFIG_NET_DIVERT=y
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
@@ -556,6 +560,9 @@ CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
 CONFIG_IEEE80211_CRYPT_WEP=m
 CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_SOFTMAC=m
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+CONFIG_WIRELESS_EXT=y
 
 #
 # Device Drivers
@@ -694,9 +701,8 @@ CONFIG_SCSI_SYM53C8XX_2=y
 CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
 CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
 CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
-# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
+CONFIG_SCSI_SYM53C8XX_MMIO=y
 # CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
 # CONFIG_SCSI_QLA_FC is not set
 # CONFIG_SCSI_LPFC is not set
@@ -715,6 +721,7 @@ CONFIG_MD_RAID0=m
 CONFIG_MD_RAID1=m
 CONFIG_MD_RAID10=m
 CONFIG_MD_RAID5=m
+CONFIG_MD_RAID5_RESHAPE=y
 CONFIG_MD_RAID6=m
 CONFIG_MD_MULTIPATH=m
 CONFIG_MD_FAULTY=m
@@ -921,6 +928,7 @@ CONFIG_HW_CONSOLE=y
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=m
 CONFIG_SERIAL_8250_NR_UARTS=4
 CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_8250_EXTENDED is not set
@@ -930,6 +938,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -988,10 +997,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 
 #
-# Multimedia Capabilities Port drivers
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -1022,6 +1027,7 @@ CONFIG_DUMMY_CONSOLE=y
 #
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
 
 #
@@ -1039,13 +1045,31 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_MMC is not set
 
 #
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
 # InfiniBand support
 #
 # CONFIG_INFINIBAND is not set
 
 #
-# SN Devices
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
 #
+# CONFIG_RTC_CLASS is not set
 
 #
 # File systems
@@ -1120,7 +1144,6 @@ CONFIG_SYSFS=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-CONFIG_RELAYFS_FS=m
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -1140,7 +1163,6 @@ CONFIG_VXFS_FS=m
 # CONFIG_QNX4FS_FS is not set
 CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
-# CONFIG_UFS_FS_WRITE is not set
 
 #
 # Network File Systems
@@ -1232,6 +1254,7 @@ CONFIG_NLS_UTF8=m
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_FS is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 
diff --git a/arch/mips/configs/bigsur_defconfig b/arch/mips/configs/bigsur_defconfig
index 32984100a75e..d85cda58d650 100644
--- a/arch/mips/configs/bigsur_defconfig
+++ b/arch/mips/configs/bigsur_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16-rc1
-# Fri Jan 27 15:39:53 2006
+# Linux kernel version: 2.6.17-rc2
+# Mon Apr 24 14:50:55 2006
 #
 CONFIG_MIPS=y
 
@@ -80,6 +80,8 @@ CONFIG_SIBYTE_CFE=y
 # CONFIG_SIBYTE_SB1250_PROF is not set
 # CONFIG_SIBYTE_TBPROF is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_DMA_COHERENT=y
 CONFIG_CPU_BIG_ENDIAN=y
@@ -154,7 +156,6 @@ CONFIG_PREEMPT_NONE=y
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 
@@ -172,6 +173,7 @@ CONFIG_SYSCTL=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 # CONFIG_CPUSETS is not set
+# CONFIG_RELAY is not set
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EMBEDDED=y
@@ -186,10 +188,6 @@ CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
 CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -201,7 +199,6 @@ CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
@@ -210,6 +207,7 @@ CONFIG_STOP_MACHINE=y
 #
 # Block layer
 #
+# CONFIG_BLK_DEV_IO_TRACE is not set
 
 #
 # IO Schedulers
@@ -230,7 +228,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_LEGACY_PROC=y
 CONFIG_PCI_DEBUG=y
 CONFIG_MMU=y
 
@@ -249,6 +246,7 @@ CONFIG_MMU=y
 #
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
+CONFIG_BUILD_ELF64=y
 CONFIG_MIPS32_COMPAT=y
 CONFIG_COMPAT=y
 CONFIG_MIPS32_O32=y
@@ -263,6 +261,7 @@ CONFIG_NET=y
 #
 # Networking options
 #
+# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -284,12 +283,15 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETFILTER is not set
 
 #
@@ -301,6 +303,11 @@ CONFIG_TCP_CONG_BIC=y
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
@@ -310,11 +317,6 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
@@ -377,7 +379,7 @@ CONFIG_BLK_DEV_LOOP=m
 CONFIG_BLK_DEV_NBD=m
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
+# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 
@@ -575,6 +577,7 @@ CONFIG_SIBYTE_SB1250_DUART_CONSOLE=y
 #
 # Non-8250 serial port support
 #
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -637,7 +640,6 @@ CONFIG_I2C_ALGO_SIBYTE=y
 # CONFIG_I2C_PROSAVAGE is not set
 # CONFIG_I2C_SAVAGE4 is not set
 CONFIG_I2C_SIBYTE=y
-# CONFIG_SCx200_ACB is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
@@ -656,9 +658,7 @@ CONFIG_SENSORS_EEPROM=y
 CONFIG_SENSORS_PCF8574=y
 CONFIG_SENSORS_PCA9539=y
 CONFIG_SENSORS_PCF8591=y
-CONFIG_SENSORS_RTC8564=y
 CONFIG_SENSORS_MAX6875=y
-# CONFIG_RTC_X1205_I2C is not set
 CONFIG_I2C_DEBUG_CORE=y
 CONFIG_I2C_DEBUG_ALGO=y
 CONFIG_I2C_DEBUG_BUS=y
@@ -686,10 +686,6 @@ CONFIG_I2C_DEBUG_CHIP=y
 #
 
 #
-# Multimedia Capabilities Port drivers
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -714,6 +710,7 @@ CONFIG_I2C_DEBUG_CHIP=y
 #
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
 
 #
@@ -731,13 +728,31 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_MMC is not set
 
 #
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
 # InfiniBand support
 #
 # CONFIG_INFINIBAND is not set
 
 #
-# SN Devices
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
 #
+# CONFIG_RTC_CLASS is not set
 
 #
 # File systems
@@ -785,7 +800,6 @@ CONFIG_SYSFS=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
 # CONFIG_CONFIGFS_FS is not set
 
 #
diff --git a/arch/mips/configs/capcella_defconfig b/arch/mips/configs/capcella_defconfig
index 6c2961affbd6..ca0af1683a00 100644
--- a/arch/mips/configs/capcella_defconfig
+++ b/arch/mips/configs/capcella_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16-rc1
-# Fri Jan 27 15:39:54 2006
+# Linux kernel version: 2.6.17-rc2
+# Tue Apr 25 00:08:06 2006
 #
 CONFIG_MIPS=y
 
@@ -72,6 +72,8 @@ CONFIG_ZAO_CAPCELLA=y
 CONFIG_PCI_VR41XX=y
 # CONFIG_VRC4173 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
@@ -90,7 +92,7 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
 # CONFIG_CPU_MIPS64_R2 is not set
 # CONFIG_CPU_R3000 is not set
 # CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_VR41XX is not set
+CONFIG_CPU_VR41XX=y
 # CONFIG_CPU_R4300 is not set
 # CONFIG_CPU_R4X00 is not set
 # CONFIG_CPU_TX49XX is not set
@@ -103,18 +105,21 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
 # CONFIG_CPU_RM7000 is not set
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_VR41XX=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
 
 #
 # Kernel type
 #
-# CONFIG_32BIT is not set
+CONFIG_32BIT=y
 # CONFIG_64BIT is not set
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 # CONFIG_MIPS_MT is not set
-CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
@@ -135,7 +140,6 @@ CONFIG_PREEMPT_NONE=y
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 
@@ -151,6 +155,7 @@ CONFIG_SYSVIPC=y
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+# CONFIG_RELAY is not set
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EMBEDDED=y
@@ -164,10 +169,6 @@ CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
 CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -179,7 +180,6 @@ CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
@@ -187,6 +187,9 @@ CONFIG_KMOD=y
 #
 # Block layer
 #
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
 
 #
 # IO Schedulers
@@ -206,7 +209,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 #
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
-CONFIG_PCI_LEGACY_PROC=y
 CONFIG_MMU=y
 
 #
@@ -224,6 +226,7 @@ CONFIG_MMU=y
 #
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
+CONFIG_TRAD_SIGNALS=y
 
 #
 # Networking
@@ -233,6 +236,7 @@ CONFIG_NET=y
 #
 # Networking options
 #
+# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -255,12 +259,15 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETFILTER is not set
 
 #
@@ -272,6 +279,11 @@ CONFIG_TCP_CONG_BIC=y
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
@@ -281,11 +293,6 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
@@ -302,10 +309,7 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
+# CONFIG_IEEE80211 is not set
 
 #
 # Device Drivers
@@ -348,10 +352,12 @@ CONFIG_CONNECTOR=m
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_RAM is not set
+CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CDROM_PKTCDVD is not set
-CONFIG_ATA_OVER_ETH=m
+# CONFIG_ATA_OVER_ETH is not set
 
 #
 # ATA/ATAPI/MFM/RLL support
@@ -578,6 +584,11 @@ CONFIG_HW_CONSOLE=y
 #
 # Non-8250 serial port support
 #
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_VR41XX=y
+CONFIG_SERIAL_VR41XX_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -601,6 +612,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # Ftape, the floppy tape device driver
 #
 # CONFIG_DRM is not set
+CONFIG_GPIO_VR41XX=y
 # CONFIG_RAW_DRIVER is not set
 
 #
@@ -636,10 +648,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 
 #
-# Multimedia Capabilities Port drivers
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -670,6 +678,7 @@ CONFIG_DUMMY_CONSOLE=y
 #
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
 
 #
@@ -687,13 +696,48 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_MMC is not set
 
 #
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
 # InfiniBand support
 #
 # CONFIG_INFINIBAND is not set
 
 #
-# SN Devices
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+
+#
+# RTC drivers
 #
+# CONFIG_RTC_DRV_M48T86 is not set
+CONFIG_RTC_DRV_VR41XX=y
+# CONFIG_RTC_DRV_TEST is not set
 
 #
 # File systems
@@ -712,7 +756,7 @@ CONFIG_EXT2_FS=y
 CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
-CONFIG_AUTOFS_FS=y
+# CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=y
 CONFIG_FUSE_FS=m
 
@@ -735,10 +779,9 @@ CONFIG_FUSE_FS=m
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
+CONFIG_TMPFS=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-CONFIG_RELAYFS_FS=m
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -805,44 +848,20 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_FS is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE="mem=32M console=ttyVR0,38400"
 
 #
 # Security options
 #
-CONFIG_KEYS=y
-CONFIG_KEYS_DEBUG_PROC_KEYS=y
+# CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 
 #
 # Cryptographic options
 #
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO is not set
 
 #
 # Hardware crypto devices
@@ -852,8 +871,6 @@ CONFIG_CRYPTO_CRC32C=m
 # Library routines
 #
 # CONFIG_CRC_CCITT is not set
-CONFIG_CRC16=m
+# CONFIG_CRC16 is not set
 CONFIG_CRC32=y
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
+# CONFIG_LIBCRC32C is not set
diff --git a/arch/mips/configs/cobalt_defconfig b/arch/mips/configs/cobalt_defconfig
index 8336b21d3db2..7d269e609282 100644
--- a/arch/mips/configs/cobalt_defconfig
+++ b/arch/mips/configs/cobalt_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16-rc1
-# Fri Jan 27 15:39:55 2006
+# Linux kernel version: 2.6.17-rc2
+# Mon Apr 24 14:50:57 2006
 #
 CONFIG_MIPS=y
 
@@ -63,7 +63,10 @@ CONFIG_MIPS_COBALT=y
 # CONFIG_TOSHIBA_JMR3927 is not set
 # CONFIG_TOSHIBA_RBTX4927 is not set
 # CONFIG_TOSHIBA_RBTX4938 is not set
+CONFIG_EARLY_PRINTK=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
@@ -113,7 +116,6 @@ CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 # CONFIG_MIPS_MT is not set
-# CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
@@ -135,7 +137,6 @@ CONFIG_PREEMPT_NONE=y
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 
@@ -151,6 +152,7 @@ CONFIG_SYSVIPC=y
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_RELAY=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EMBEDDED=y
@@ -164,10 +166,6 @@ CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
 CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -182,6 +180,8 @@ CONFIG_BASE_SMALL=0
 # Block layer
 #
 # CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
 
 #
 # IO Schedulers
@@ -201,7 +201,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 #
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
-CONFIG_PCI_LEGACY_PROC=y
 CONFIG_MMU=y
 
 #
@@ -229,6 +228,7 @@ CONFIG_NET=y
 #
 # Networking options
 #
+# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -247,12 +247,15 @@ CONFIG_IP_FIB_HASH=y
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=y
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETFILTER is not set
 
 #
@@ -264,6 +267,11 @@ CONFIG_TCP_CONG_BIC=y
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
@@ -273,11 +281,6 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
@@ -298,6 +301,9 @@ CONFIG_IEEE80211=y
 # CONFIG_IEEE80211_DEBUG is not set
 CONFIG_IEEE80211_CRYPT_WEP=y
 CONFIG_IEEE80211_CRYPT_CCMP=y
+CONFIG_IEEE80211_SOFTMAC=y
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+CONFIG_WIRELESS_EXT=y
 
 #
 # Device Drivers
@@ -343,7 +349,7 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
+# CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CDROM_PKTCDVD=y
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
@@ -593,6 +599,7 @@ CONFIG_HW_CONSOLE=y
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
 CONFIG_SERIAL_8250_NR_UARTS=4
 CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_8250_EXTENDED is not set
@@ -602,6 +609,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -660,10 +668,6 @@ CONFIG_COBALT_LCD=y
 #
 
 #
-# Multimedia Capabilities Port drivers
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -694,6 +698,7 @@ CONFIG_DUMMY_CONSOLE=y
 #
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
 
 #
@@ -711,13 +716,31 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_MMC is not set
 
 #
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
 # InfiniBand support
 #
 # CONFIG_INFINIBAND is not set
 
 #
-# SN Devices
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
 #
+# CONFIG_RTC_CLASS is not set
 
 #
 # File systems
@@ -765,7 +788,6 @@ CONFIG_SYSFS=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-CONFIG_RELAYFS_FS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -828,6 +850,8 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_FS is not set
+# CONFIG_UNWIND_INFO is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 
diff --git a/arch/mips/configs/db1000_defconfig b/arch/mips/configs/db1000_defconfig
index 7f071403c8e3..579b665e3339 100644
--- a/arch/mips/configs/db1000_defconfig
+++ b/arch/mips/configs/db1000_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16-rc1
-# Fri Jan 27 15:39:56 2006
+# Linux kernel version: 2.6.17-rc2
+# Mon Apr 24 14:50:57 2006
 #
 CONFIG_MIPS=y
 
@@ -64,6 +64,8 @@ CONFIG_MIPS_DB1000=y
 # CONFIG_TOSHIBA_RBTX4927 is not set
 # CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
@@ -114,11 +116,11 @@ CONFIG_PAGE_SIZE_4KB=y
 CONFIG_CPU_HAS_PREFETCH=y
 # CONFIG_MIPS_MT is not set
 CONFIG_64BIT_PHYS_ADDR=y
-# CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
@@ -136,7 +138,6 @@ CONFIG_PREEMPT_NONE=y
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 
@@ -152,6 +153,7 @@ CONFIG_SYSVIPC=y
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_RELAY=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EMBEDDED=y
@@ -165,10 +167,6 @@ CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
 CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -181,7 +179,6 @@ CONFIG_OBSOLETE_INTERMODULE=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
@@ -190,6 +187,8 @@ CONFIG_KMOD=y
 # Block layer
 #
 # CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
 
 #
 # IO Schedulers
@@ -245,6 +244,7 @@ CONFIG_NET=y
 #
 # Networking options
 #
+# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -267,7 +267,8 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -278,6 +279,8 @@ CONFIG_TCP_CONG_BIC=y
 #
 # CONFIG_IP_VS is not set
 # CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
 
@@ -294,10 +297,13 @@ CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
 CONFIG_NETFILTER_XT_MATCH_MAC=m
 CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
 CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
 CONFIG_NETFILTER_XT_MATCH_REALM=m
 CONFIG_NETFILTER_XT_MATCH_SCTP=m
@@ -321,6 +327,11 @@ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
@@ -330,11 +341,6 @@ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
@@ -356,6 +362,9 @@ CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
 CONFIG_IEEE80211_CRYPT_WEP=m
 CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_SOFTMAC=m
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+CONFIG_WIRELESS_EXT=y
 
 #
 # Device Drivers
@@ -412,7 +421,6 @@ CONFIG_MTD_CFI_I2=y
 # CONFIG_MTD_CFI_I8 is not set
 # CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_CFI_AMDSTD_RETRY=0
 # CONFIG_MTD_CFI_STAA is not set
 CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_RAM is not set
@@ -434,7 +442,6 @@ CONFIG_MTD_ALCHEMY=y
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
 # CONFIG_MTD_BLOCK2MTD is not set
 
 #
@@ -471,7 +478,7 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
+# CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
@@ -722,10 +729,6 @@ CONFIG_SYNCLINK_CS=m
 #
 
 #
-# Multimedia Capabilities Port drivers
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -756,6 +759,7 @@ CONFIG_DUMMY_CONSOLE=y
 #
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
 # CONFIG_USB is not set
 
 #
@@ -773,12 +777,30 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_MMC is not set
 
 #
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
 # InfiniBand support
 #
 
 #
-# SN Devices
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
 #
+# CONFIG_RTC_CLASS is not set
 
 #
 # File systems
@@ -836,7 +858,6 @@ CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-CONFIG_RELAYFS_FS=m
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -945,6 +966,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_FS is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 
diff --git a/arch/mips/configs/db1100_defconfig b/arch/mips/configs/db1100_defconfig
index 98590cac1ec5..e5eb53867422 100644
--- a/arch/mips/configs/db1100_defconfig
+++ b/arch/mips/configs/db1100_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16-rc1
-# Fri Jan 27 15:39:57 2006
+# Linux kernel version: 2.6.17-rc2
+# Mon Apr 24 14:50:58 2006
 #
 CONFIG_MIPS=y
 
@@ -64,6 +64,8 @@ CONFIG_MIPS_DB1100=y
 # CONFIG_TOSHIBA_RBTX4927 is not set
 # CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
@@ -114,11 +116,11 @@ CONFIG_PAGE_SIZE_4KB=y
 CONFIG_CPU_HAS_PREFETCH=y
 # CONFIG_MIPS_MT is not set
 CONFIG_64BIT_PHYS_ADDR=y
-# CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
@@ -136,7 +138,6 @@ CONFIG_PREEMPT_NONE=y
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 
@@ -152,6 +153,7 @@ CONFIG_SYSVIPC=y
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_RELAY=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EMBEDDED=y
@@ -165,10 +167,6 @@ CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
 CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -181,7 +179,6 @@ CONFIG_OBSOLETE_INTERMODULE=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
@@ -190,6 +187,8 @@ CONFIG_KMOD=y
 # Block layer
 #
 # CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
 
 #
 # IO Schedulers
@@ -234,6 +233,7 @@ CONFIG_NET=y
 #
 # Networking options
 #
+# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -256,7 +256,8 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -267,6 +268,8 @@ CONFIG_TCP_CONG_BIC=y
 #
 # CONFIG_IP_VS is not set
 # CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
 
@@ -283,10 +286,13 @@ CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
 CONFIG_NETFILTER_XT_MATCH_MAC=m
 CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
 CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
 CONFIG_NETFILTER_XT_MATCH_REALM=m
 CONFIG_NETFILTER_XT_MATCH_SCTP=m
@@ -310,6 +316,11 @@ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
@@ -319,11 +330,6 @@ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
@@ -345,6 +351,9 @@ CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
 CONFIG_IEEE80211_CRYPT_WEP=m
 CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_SOFTMAC=m
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+CONFIG_WIRELESS_EXT=y
 
 #
 # Device Drivers
@@ -401,7 +410,6 @@ CONFIG_MTD_CFI_I2=y
 # CONFIG_MTD_CFI_I8 is not set
 # CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_CFI_AMDSTD_RETRY=0
 # CONFIG_MTD_CFI_STAA is not set
 CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_RAM is not set
@@ -423,7 +431,6 @@ CONFIG_MTD_ALCHEMY=y
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
 # CONFIG_MTD_BLOCK2MTD is not set
 
 #
@@ -460,7 +467,7 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
+# CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
@@ -690,10 +697,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 
 #
-# Multimedia Capabilities Port drivers
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -711,6 +714,7 @@ CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_MACMODES is not set
+CONFIG_FB_FIRMWARE_EDID=y
 # CONFIG_FB_MODE_HELPERS is not set
 # CONFIG_FB_TILEBLITTING is not set
 # CONFIG_FB_S1D13XXX is not set
@@ -755,6 +759,7 @@ CONFIG_LOGO_LINUX_CLUT224=y
 #
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
 # CONFIG_USB is not set
 
 #
@@ -772,12 +777,30 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_MMC is not set
 
 #
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
 # InfiniBand support
 #
 
 #
-# SN Devices
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
 #
+# CONFIG_RTC_CLASS is not set
 
 #
 # File systems
@@ -835,7 +858,6 @@ CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-CONFIG_RELAYFS_FS=m
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -944,6 +966,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_FS is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 
diff --git a/arch/mips/configs/db1200_defconfig b/arch/mips/configs/db1200_defconfig
index 92888472dca0..a43fb2329fd5 100644
--- a/arch/mips/configs/db1200_defconfig
+++ b/arch/mips/configs/db1200_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16-rc1
-# Fri Jan 27 15:39:58 2006
+# Linux kernel version: 2.6.17-rc2
+# Mon Apr 24 14:50:58 2006
 #
 CONFIG_MIPS=y
 
@@ -64,6 +64,8 @@ CONFIG_MIPS_DB1200=y
 # CONFIG_TOSHIBA_RBTX4927 is not set
 # CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_DMA_COHERENT=y
 CONFIG_MIPS_DISABLE_OBSOLETE_IDE=y
@@ -114,11 +116,11 @@ CONFIG_PAGE_SIZE_4KB=y
 CONFIG_CPU_HAS_PREFETCH=y
 # CONFIG_MIPS_MT is not set
 CONFIG_64BIT_PHYS_ADDR=y
-# CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
@@ -136,7 +138,6 @@ CONFIG_PREEMPT_NONE=y
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 
@@ -153,6 +154,7 @@ CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
+# CONFIG_RELAY is not set
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EMBEDDED=y
@@ -166,10 +168,6 @@ CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
 CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -182,7 +180,6 @@ CONFIG_OBSOLETE_INTERMODULE=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
@@ -191,6 +188,8 @@ CONFIG_KMOD=y
 # Block layer
 #
 # CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
 
 #
 # IO Schedulers
@@ -244,6 +243,7 @@ CONFIG_NET=y
 #
 # Networking options
 #
+# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -263,7 +263,8 @@ CONFIG_IP_FIB_HASH=y
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -274,6 +275,8 @@ CONFIG_TCP_CONG_BIC=y
 #
 # CONFIG_IP_VS is not set
 # CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
 
@@ -288,10 +291,13 @@ CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
 CONFIG_NETFILTER_XT_MATCH_MAC=m
 CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
 CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
 CONFIG_NETFILTER_XT_MATCH_REALM=m
 CONFIG_NETFILTER_XT_MATCH_SCTP=m
@@ -315,6 +321,11 @@ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
@@ -324,11 +335,6 @@ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
@@ -403,7 +409,6 @@ CONFIG_MTD_CFI_I2=y
 # CONFIG_MTD_CFI_I8 is not set
 # CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_CFI_AMDSTD_RETRY=0
 # CONFIG_MTD_CFI_STAA is not set
 CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_RAM is not set
@@ -425,7 +430,6 @@ CONFIG_MTD_ALCHEMY=y
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
 # CONFIG_MTD_BLOCK2MTD is not set
 
 #
@@ -763,10 +767,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 
 #
-# Multimedia Capabilities Port drivers
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -784,6 +784,7 @@ CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_MACMODES is not set
+CONFIG_FB_FIRMWARE_EDID=y
 # CONFIG_FB_MODE_HELPERS is not set
 # CONFIG_FB_TILEBLITTING is not set
 # CONFIG_FB_S1D13XXX is not set
@@ -794,6 +795,7 @@ CONFIG_FB_AU1200=y
 # Console display driver support
 #
 CONFIG_VGA_CONSOLE=y
+# CONFIG_VGACON_SOFT_SCROLLBACK is not set
 CONFIG_DUMMY_CONSOLE=y
 # CONFIG_FRAMEBUFFER_CONSOLE is not set
 
@@ -816,6 +818,7 @@ CONFIG_LOGO_LINUX_CLUT224=y
 #
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
 
 #
@@ -832,6 +835,7 @@ CONFIG_USB_GADGET=m
 # CONFIG_USB_GADGET_GOKU is not set
 # CONFIG_USB_GADGET_LH7A40X is not set
 # CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_AT91 is not set
 # CONFIG_USB_GADGET_DUMMY_HCD is not set
 # CONFIG_USB_GADGET_DUALSPEED is not set
 
@@ -844,12 +848,30 @@ CONFIG_MMC_BLOCK=y
 CONFIG_MMC_AU1X=y
 
 #
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
 # InfiniBand support
 #
 
 #
-# SN Devices
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
 #
+# CONFIG_RTC_CLASS is not set
 
 #
 # File systems
@@ -913,7 +935,6 @@ CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -1027,6 +1048,7 @@ CONFIG_NLS_UTF8=m
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_FS is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE="mem=48M"
 
diff --git a/arch/mips/configs/db1500_defconfig b/arch/mips/configs/db1500_defconfig
index 5a415b1d4af0..ad632d87c4ef 100644
--- a/arch/mips/configs/db1500_defconfig
+++ b/arch/mips/configs/db1500_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16-rc1
-# Fri Jan 27 15:39:59 2006
+# Linux kernel version: 2.6.17-rc2
+# Mon Apr 24 14:50:59 2006
 #
 CONFIG_MIPS=y
 
@@ -64,6 +64,8 @@ CONFIG_MIPS_DB1500=y
 # CONFIG_TOSHIBA_RBTX4927 is not set
 # CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
@@ -116,11 +118,11 @@ CONFIG_PAGE_SIZE_4KB=y
 CONFIG_CPU_HAS_PREFETCH=y
 # CONFIG_MIPS_MT is not set
 CONFIG_64BIT_PHYS_ADDR=y
-# CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
@@ -138,7 +140,6 @@ CONFIG_PREEMPT_NONE=y
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 
@@ -154,6 +155,7 @@ CONFIG_SYSVIPC=y
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_RELAY=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EMBEDDED=y
@@ -167,10 +169,6 @@ CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
 CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -183,7 +181,6 @@ CONFIG_OBSOLETE_INTERMODULE=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
@@ -192,6 +189,8 @@ CONFIG_KMOD=y
 # Block layer
 #
 # CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
 
 #
 # IO Schedulers
@@ -211,7 +210,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 #
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
-CONFIG_PCI_LEGACY_PROC=y
 CONFIG_MMU=y
 
 #
@@ -253,6 +251,7 @@ CONFIG_NET=y
 #
 # Networking options
 #
+# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -275,7 +274,8 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -286,6 +286,8 @@ CONFIG_TCP_CONG_BIC=y
 #
 # CONFIG_IP_VS is not set
 # CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
 
@@ -302,10 +304,13 @@ CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
 CONFIG_NETFILTER_XT_MATCH_MAC=m
 CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
 CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
 CONFIG_NETFILTER_XT_MATCH_REALM=m
 CONFIG_NETFILTER_XT_MATCH_SCTP=m
@@ -329,6 +334,11 @@ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
@@ -338,11 +348,6 @@ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
@@ -364,6 +369,9 @@ CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
 CONFIG_IEEE80211_CRYPT_WEP=m
 CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_SOFTMAC=m
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+CONFIG_WIRELESS_EXT=y
 
 #
 # Device Drivers
@@ -420,7 +428,6 @@ CONFIG_MTD_CFI_I2=y
 # CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_CFI_AMDSTD_RETRY=0
 # CONFIG_MTD_CFI_STAA is not set
 CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_RAM is not set
@@ -443,7 +450,6 @@ CONFIG_MTD_ALCHEMY=y
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
 # CONFIG_MTD_BLOCK2MTD is not set
 
 #
@@ -486,7 +492,7 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_UB is not set
 # CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
+# CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
@@ -714,6 +720,7 @@ CONFIG_SERIO_RAW=m
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
 # CONFIG_SERIAL_8250_CS is not set
 CONFIG_SERIAL_8250_NR_UARTS=4
 CONFIG_SERIAL_8250_RUNTIME_UARTS=4
@@ -725,6 +732,7 @@ CONFIG_SERIAL_8250_AU1X00=y
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -790,10 +798,6 @@ CONFIG_SYNCLINK_CS=m
 #
 
 #
-# Multimedia Capabilities Port drivers
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -802,6 +806,7 @@ CONFIG_SYNCLINK_CS=m
 # Digital Video Broadcasting Devices
 #
 # CONFIG_DVB is not set
+# CONFIG_USB_DABUSB is not set
 
 #
 # Graphics support
@@ -825,9 +830,11 @@ CONFIG_SND_SEQ_DUMMY=m
 CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
 CONFIG_SND_SEQUENCER_OSS=y
 # CONFIG_SND_DYNAMIC_MINORS is not set
 CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
 
@@ -846,6 +853,7 @@ CONFIG_SND_MTPAV=m
 # PCI devices
 #
 # CONFIG_SND_AD1889 is not set
+# CONFIG_SND_ALS300 is not set
 # CONFIG_SND_ALI5451 is not set
 # CONFIG_SND_ATIIXP is not set
 # CONFIG_SND_ATIIXP_MODEM is not set
@@ -877,6 +885,7 @@ CONFIG_SND_MTPAV=m
 # CONFIG_SND_MIXART is not set
 # CONFIG_SND_NM256 is not set
 # CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RIPTIDE is not set
 # CONFIG_SND_RME32 is not set
 # CONFIG_SND_RME96 is not set
 # CONFIG_SND_RME9652 is not set
@@ -905,34 +914,22 @@ CONFIG_SND_AU1X00=m
 # Open Sound System
 #
 CONFIG_SOUND_PRIME=y
-CONFIG_OBSOLETE_OSS_DRIVER=y
 # CONFIG_SOUND_BT878 is not set
-# CONFIG_SOUND_CMPCI is not set
 # CONFIG_SOUND_EMU10K1 is not set
 # CONFIG_SOUND_FUSION is not set
-# CONFIG_SOUND_CS4281 is not set
-# CONFIG_SOUND_ES1370 is not set
 # CONFIG_SOUND_ES1371 is not set
-# CONFIG_SOUND_ESSSOLO1 is not set
-# CONFIG_SOUND_MAESTRO is not set
-# CONFIG_SOUND_MAESTRO3 is not set
 # CONFIG_SOUND_ICH is not set
-# CONFIG_SOUND_SONICVIBES is not set
-# CONFIG_SOUND_AU1000 is not set
 # CONFIG_SOUND_TRIDENT is not set
 # CONFIG_SOUND_MSNDCLAS is not set
 # CONFIG_SOUND_MSNDPIN is not set
 # CONFIG_SOUND_VIA82CXXX is not set
-# CONFIG_SOUND_ALI5455 is not set
-# CONFIG_SOUND_FORTE is not set
-# CONFIG_SOUND_RME96XX is not set
-# CONFIG_SOUND_AD1980 is not set
 
 #
 # USB support
 #
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 # CONFIG_USB_DEBUG is not set
 
@@ -958,7 +955,6 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 #
 # USB Device Class drivers
 #
-# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
 
@@ -985,9 +981,7 @@ CONFIG_USB_HIDINPUT=y
 # CONFIG_USB_ACECAD is not set
 # CONFIG_USB_KBTAB is not set
 # CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_TOUCHSCREEN is not set
 CONFIG_USB_YEALINK=m
 # CONFIG_USB_XPAD is not set
 # CONFIG_USB_ATI_REMOTE is not set
@@ -1001,15 +995,6 @@ CONFIG_USB_YEALINK=m
 # CONFIG_USB_MDC800 is not set
 
 #
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-
-#
-# Video4Linux support is needed for USB Multimedia device support
-#
-
-#
 # USB Network Adapters
 #
 # CONFIG_USB_CATC is not set
@@ -1059,13 +1044,31 @@ CONFIG_USB_LD=m
 # CONFIG_MMC is not set
 
 #
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
 # InfiniBand support
 #
 # CONFIG_INFINIBAND is not set
 
 #
-# SN Devices
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
 #
+# CONFIG_RTC_CLASS is not set
 
 #
 # File systems
@@ -1123,7 +1126,6 @@ CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-CONFIG_RELAYFS_FS=m
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -1232,6 +1234,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_FS is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 
diff --git a/arch/mips/configs/db1550_defconfig b/arch/mips/configs/db1550_defconfig
index 8dc1f18badfe..8130e23dc255 100644
--- a/arch/mips/configs/db1550_defconfig
+++ b/arch/mips/configs/db1550_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16-rc1
-# Fri Jan 27 15:40:00 2006
+# Linux kernel version: 2.6.17-rc2
+# Mon Apr 24 14:51:00 2006
 #
 CONFIG_MIPS=y
 
@@ -64,6 +64,8 @@ CONFIG_MIPS_DB1550=y
 # CONFIG_TOSHIBA_RBTX4927 is not set
 # CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
@@ -115,11 +117,11 @@ CONFIG_PAGE_SIZE_4KB=y
 CONFIG_CPU_HAS_PREFETCH=y
 # CONFIG_MIPS_MT is not set
 CONFIG_64BIT_PHYS_ADDR=y
-# CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
@@ -137,7 +139,6 @@ CONFIG_PREEMPT_NONE=y
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 
@@ -153,6 +154,7 @@ CONFIG_SYSVIPC=y
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_RELAY=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EMBEDDED=y
@@ -166,10 +168,6 @@ CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
 CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -182,7 +180,6 @@ CONFIG_OBSOLETE_INTERMODULE=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
@@ -191,6 +188,8 @@ CONFIG_KMOD=y
 # Block layer
 #
 # CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
 
 #
 # IO Schedulers
@@ -210,7 +209,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 #
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
-CONFIG_PCI_LEGACY_PROC=y
 CONFIG_MMU=y
 
 #
@@ -252,6 +250,7 @@ CONFIG_NET=y
 #
 # Networking options
 #
+# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -274,7 +273,8 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -285,6 +285,8 @@ CONFIG_TCP_CONG_BIC=y
 #
 # CONFIG_IP_VS is not set
 # CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
 
@@ -301,10 +303,13 @@ CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
 CONFIG_NETFILTER_XT_MATCH_MAC=m
 CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
 CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
 CONFIG_NETFILTER_XT_MATCH_REALM=m
 CONFIG_NETFILTER_XT_MATCH_SCTP=m
@@ -328,6 +333,11 @@ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
@@ -337,11 +347,6 @@ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
@@ -363,6 +368,9 @@ CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
 CONFIG_IEEE80211_CRYPT_WEP=m
 CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_SOFTMAC=m
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+CONFIG_WIRELESS_EXT=y
 
 #
 # Device Drivers
@@ -419,7 +427,6 @@ CONFIG_MTD_CFI_I2=y
 # CONFIG_MTD_CFI_I8 is not set
 # CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_CFI_AMDSTD_RETRY=0
 # CONFIG_MTD_CFI_STAA is not set
 CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_RAM is not set
@@ -442,7 +449,6 @@ CONFIG_MTD_ALCHEMY=y
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
 # CONFIG_MTD_BLOCK2MTD is not set
 
 #
@@ -489,7 +495,7 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
+# CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
@@ -754,6 +760,7 @@ CONFIG_SERIO_RAW=m
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
 # CONFIG_SERIAL_8250_CS is not set
 CONFIG_SERIAL_8250_NR_UARTS=4
 CONFIG_SERIAL_8250_RUNTIME_UARTS=4
@@ -765,6 +772,7 @@ CONFIG_SERIAL_8250_AU1X00=y
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -830,10 +838,6 @@ CONFIG_SYNCLINK_CS=m
 #
 
 #
-# Multimedia Capabilities Port drivers
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -858,6 +862,7 @@ CONFIG_SYNCLINK_CS=m
 #
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
 
 #
@@ -875,13 +880,31 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_MMC is not set
 
 #
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
 # InfiniBand support
 #
 # CONFIG_INFINIBAND is not set
 
 #
-# SN Devices
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
 #
+# CONFIG_RTC_CLASS is not set
 
 #
 # File systems
@@ -939,7 +962,6 @@ CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-CONFIG_RELAYFS_FS=m
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -1048,6 +1070,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_FS is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 
diff --git a/arch/mips/configs/ddb5476_defconfig b/arch/mips/configs/ddb5476_defconfig
index 8fae63e47e5e..8d88ac1bbfeb 100644
--- a/arch/mips/configs/ddb5476_defconfig
+++ b/arch/mips/configs/ddb5476_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16-rc1
-# Fri Jan 27 15:40:02 2006
+# Linux kernel version: 2.6.17-rc2
+# Mon Apr 24 14:51:00 2006
 #
 CONFIG_MIPS=y
 
@@ -64,6 +64,8 @@ CONFIG_DDB5476=y
 # CONFIG_TOSHIBA_RBTX4927 is not set
 # CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
@@ -114,7 +116,6 @@ CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 # CONFIG_MIPS_MT is not set
-# CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
@@ -136,7 +137,6 @@ CONFIG_PREEMPT_NONE=y
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 
@@ -152,6 +152,7 @@ CONFIG_SYSVIPC=y
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_RELAY=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EMBEDDED=y
@@ -165,10 +166,6 @@ CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
 CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -183,6 +180,8 @@ CONFIG_BASE_SMALL=0
 # Block layer
 #
 # CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
 
 #
 # IO Schedulers
@@ -202,7 +201,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 #
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
-CONFIG_PCI_LEGACY_PROC=y
 CONFIG_ISA=y
 CONFIG_MMU=y
 
@@ -231,6 +229,7 @@ CONFIG_NET=y
 #
 # Networking options
 #
+# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -252,12 +251,15 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=y
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETFILTER is not set
 
 #
@@ -269,6 +271,11 @@ CONFIG_TCP_CONG_BIC=y
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
@@ -278,11 +285,6 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
@@ -303,6 +305,9 @@ CONFIG_IEEE80211=y
 # CONFIG_IEEE80211_DEBUG is not set
 CONFIG_IEEE80211_CRYPT_WEP=y
 CONFIG_IEEE80211_CRYPT_CCMP=y
+CONFIG_IEEE80211_SOFTMAC=y
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+CONFIG_WIRELESS_EXT=y
 
 #
 # Device Drivers
@@ -348,7 +353,7 @@ CONFIG_PROC_EVENTS=y
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
+# CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CDROM_PKTCDVD=y
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
@@ -571,6 +576,7 @@ CONFIG_HW_CONSOLE=y
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
 CONFIG_SERIAL_8250_NR_UARTS=4
 CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_8250_EXTENDED is not set
@@ -580,6 +586,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -638,10 +645,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 
 #
-# Multimedia Capabilities Port drivers
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -659,6 +662,7 @@ CONFIG_FB=y
 # CONFIG_FB_CFB_COPYAREA is not set
 # CONFIG_FB_CFB_IMAGEBLIT is not set
 # CONFIG_FB_MACMODES is not set
+CONFIG_FB_FIRMWARE_EDID=y
 # CONFIG_FB_MODE_HELPERS is not set
 # CONFIG_FB_TILEBLITTING is not set
 # CONFIG_FB_CIRRUS is not set
@@ -670,7 +674,6 @@ CONFIG_FB=y
 # CONFIG_FB_NVIDIA is not set
 # CONFIG_FB_RIVA is not set
 # CONFIG_FB_MATROX is not set
-# CONFIG_FB_RADEON_OLD is not set
 # CONFIG_FB_RADEON is not set
 # CONFIG_FB_ATY128 is not set
 # CONFIG_FB_ATY is not set
@@ -708,6 +711,7 @@ CONFIG_DUMMY_CONSOLE=y
 #
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
 
 #
@@ -725,13 +729,31 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_MMC is not set
 
 #
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
 # InfiniBand support
 #
 # CONFIG_INFINIBAND is not set
 
 #
-# SN Devices
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
 #
+# CONFIG_RTC_CLASS is not set
 
 #
 # File systems
@@ -776,7 +798,6 @@ CONFIG_SYSFS=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-CONFIG_RELAYFS_FS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -840,6 +861,8 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_FS is not set
+# CONFIG_UNWIND_INFO is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE="ip=any"
 
diff --git a/arch/mips/configs/ddb5477_defconfig b/arch/mips/configs/ddb5477_defconfig
index a0fcd44e7709..8c911b671415 100644
--- a/arch/mips/configs/ddb5477_defconfig
+++ b/arch/mips/configs/ddb5477_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16-rc1
-# Fri Jan 27 15:40:02 2006
+# Linux kernel version: 2.6.17-rc2
+# Mon Apr 24 14:51:01 2006
 #
 CONFIG_MIPS=y
 
@@ -65,6 +65,8 @@ CONFIG_DDB5477=y
 # CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_DDB5477_BUS_FREQUENCY=0
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
@@ -114,7 +116,6 @@ CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 # CONFIG_MIPS_MT is not set
-# CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
@@ -136,7 +137,6 @@ CONFIG_PREEMPT_NONE=y
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 
@@ -152,6 +152,7 @@ CONFIG_SYSVIPC=y
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_RELAY=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EMBEDDED=y
@@ -165,10 +166,6 @@ CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
 CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -183,6 +180,8 @@ CONFIG_BASE_SMALL=0
 # Block layer
 #
 # CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
 
 #
 # IO Schedulers
@@ -202,7 +201,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 #
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
-CONFIG_PCI_LEGACY_PROC=y
 CONFIG_MMU=y
 
 #
@@ -230,6 +228,7 @@ CONFIG_NET=y
 #
 # Networking options
 #
+# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -251,12 +250,15 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=y
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETFILTER is not set
 
 #
@@ -268,6 +270,11 @@ CONFIG_TCP_CONG_BIC=y
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
@@ -277,11 +284,6 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
@@ -302,6 +304,9 @@ CONFIG_IEEE80211=y
 # CONFIG_IEEE80211_DEBUG is not set
 CONFIG_IEEE80211_CRYPT_WEP=y
 CONFIG_IEEE80211_CRYPT_CCMP=y
+CONFIG_IEEE80211_SOFTMAC=y
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+CONFIG_WIRELESS_EXT=y
 
 #
 # Device Drivers
@@ -346,7 +351,7 @@ CONFIG_PROC_EVENTS=y
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
+# CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CDROM_PKTCDVD=y
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
@@ -556,6 +561,7 @@ CONFIG_HW_CONSOLE=y
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
 CONFIG_SERIAL_8250_NR_UARTS=4
 CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_8250_EXTENDED is not set
@@ -565,6 +571,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -623,10 +630,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 
 #
-# Multimedia Capabilities Port drivers
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -657,6 +660,7 @@ CONFIG_DUMMY_CONSOLE=y
 #
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
 
 #
@@ -674,13 +678,31 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_MMC is not set
 
 #
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
 # InfiniBand support
 #
 # CONFIG_INFINIBAND is not set
 
 #
-# SN Devices
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
 #
+# CONFIG_RTC_CLASS is not set
 
 #
 # File systems
@@ -725,7 +747,6 @@ CONFIG_SYSFS=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-CONFIG_RELAYFS_FS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -792,6 +813,8 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_FS is not set
+# CONFIG_UNWIND_INFO is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE="ip=any"
 
diff --git a/arch/mips/configs/decstation_defconfig b/arch/mips/configs/decstation_defconfig
index 5a181eadd437..d838496e114f 100644
--- a/arch/mips/configs/decstation_defconfig
+++ b/arch/mips/configs/decstation_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16-rc1
-# Fri Jan 27 15:40:03 2006
+# Linux kernel version: 2.6.17-rc2
+# Mon Apr 24 14:51:01 2006
 #
 CONFIG_MIPS=y
 
@@ -63,11 +63,13 @@ CONFIG_MACH_DECSTATION=y
 # CONFIG_TOSHIBA_JMR3927 is not set
 # CONFIG_TOSHIBA_RBTX4927 is not set
 # CONFIG_TOSHIBA_RBTX4938 is not set
+CONFIG_EARLY_PRINTK=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
-CONFIG_EARLY_PRINTK=y
 # CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_CPU_LITTLE_ENDIAN=y
 CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
@@ -113,7 +115,6 @@ CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 # CONFIG_MIPS_MT is not set
-# CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_WB=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
@@ -135,7 +136,6 @@ CONFIG_PREEMPT_NONE=y
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 
@@ -151,6 +151,7 @@ CONFIG_SYSVIPC=y
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_RELAY=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EMBEDDED=y
@@ -165,10 +166,6 @@ CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
 CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -180,7 +177,6 @@ CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODVERSIONS is not set
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
@@ -189,6 +185,8 @@ CONFIG_KMOD=y
 # Block layer
 #
 # CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
 
 #
 # IO Schedulers
@@ -233,11 +231,10 @@ CONFIG_NET=y
 #
 # Networking options
 #
+# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -254,12 +251,15 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETFILTER is not set
 
 #
@@ -271,6 +271,11 @@ CONFIG_TCP_CONG_BIC=y
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
@@ -280,11 +285,6 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
@@ -305,6 +305,9 @@ CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
 CONFIG_IEEE80211_CRYPT_WEP=m
 CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_SOFTMAC=m
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+CONFIG_WIRELESS_EXT=y
 
 #
 # Device Drivers
@@ -345,7 +348,7 @@ CONFIG_BLK_DEV_LOOP=m
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
+# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 
@@ -567,10 +570,6 @@ CONFIG_RTC=y
 #
 
 #
-# Multimedia Capabilities Port drivers
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -588,6 +587,7 @@ CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_MACMODES is not set
+CONFIG_FB_FIRMWARE_EDID=y
 # CONFIG_FB_MODE_HELPERS is not set
 # CONFIG_FB_TILEBLITTING is not set
 # CONFIG_FB_S1D13XXX is not set
@@ -617,6 +617,7 @@ CONFIG_LOGO_DEC_CLUT224=y
 #
 # CONFIG_USB_ARCH_HAS_HCD is not set
 # CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -633,12 +634,30 @@ CONFIG_LOGO_DEC_CLUT224=y
 # CONFIG_MMC is not set
 
 #
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
 # InfiniBand support
 #
 
 #
-# SN Devices
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
 #
+# CONFIG_RTC_CLASS is not set
 
 #
 # File systems
@@ -686,7 +705,6 @@ CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-CONFIG_RELAYFS_FS=m
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -705,7 +723,6 @@ CONFIG_RELAYFS_FS=m
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_SYSV_FS is not set
 CONFIG_UFS_FS=y
-CONFIG_UFS_FS_WRITE=y
 
 #
 # Network File Systems
diff --git a/arch/mips/configs/e55_defconfig b/arch/mips/configs/e55_defconfig
index 8fbfc06a6a2a..0760f4318910 100644
--- a/arch/mips/configs/e55_defconfig
+++ b/arch/mips/configs/e55_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16-rc1
-# Fri Jan 27 15:40:04 2006
+# Linux kernel version: 2.6.17-rc2
+# Tue Apr 25 00:08:20 2006
 #
 CONFIG_MIPS=y
 
@@ -70,6 +70,8 @@ CONFIG_CASIO_E55=y
 # CONFIG_VICTOR_MPC30X is not set
 # CONFIG_ZAO_CAPCELLA is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
@@ -88,7 +90,7 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
 # CONFIG_CPU_MIPS64_R2 is not set
 # CONFIG_CPU_R3000 is not set
 # CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_VR41XX is not set
+CONFIG_CPU_VR41XX=y
 # CONFIG_CPU_R4300 is not set
 # CONFIG_CPU_R4X00 is not set
 # CONFIG_CPU_TX49XX is not set
@@ -101,18 +103,21 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
 # CONFIG_CPU_RM7000 is not set
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_VR41XX=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
 
 #
 # Kernel type
 #
-# CONFIG_32BIT is not set
+CONFIG_32BIT=y
 # CONFIG_64BIT is not set
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 # CONFIG_MIPS_MT is not set
-CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
@@ -133,7 +138,6 @@ CONFIG_PREEMPT_NONE=y
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 
@@ -144,11 +148,10 @@ CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+# CONFIG_RELAY is not set
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EMBEDDED=y
@@ -162,10 +165,6 @@ CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
 CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -177,7 +176,6 @@ CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
@@ -185,6 +183,9 @@ CONFIG_KMOD=y
 #
 # Block layer
 #
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
 
 #
 # IO Schedulers
@@ -219,85 +220,12 @@ CONFIG_MMU=y
 #
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
+CONFIG_TRAD_SIGNALS=y
 
 #
 # Networking
 #
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
+# CONFIG_NET is not set
 
 #
 # Device Drivers
@@ -313,7 +241,6 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 #
 # Connector - unified userspace <-> kernelspace linker
 #
-CONFIG_CONNECTOR=m
 
 #
 # Memory Technology Devices (MTD)
@@ -335,11 +262,11 @@ CONFIG_CONNECTOR=m
 #
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
+CONFIG_BLK_DEV_RAM=m
 CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
 
 #
 # ATA/ATAPI/MFM/RLL support
@@ -398,81 +325,8 @@ CONFIG_IDE_GENERIC=y
 #
 
 #
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-CONFIG_PHYLIB=m
-
-#
-# MII PHY device drivers
-#
-CONFIG_MARVELL_PHY=m
-CONFIG_DAVICOM_PHY=m
-CONFIG_QSEMI_PHY=m
-CONFIG_LXT_PHY=m
-CONFIG_CICADA_PHY=m
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_DM9000 is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
-# CONFIG_NET_PCI is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
 # ISDN subsystem
 #
-# CONFIG_ISDN is not set
 
 #
 # Telephony Support
@@ -508,11 +362,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
 #
 # Hardware I/O ports
 #
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=m
+# CONFIG_SERIO is not set
 # CONFIG_GAMEPORT is not set
 
 #
@@ -531,6 +381,10 @@ CONFIG_HW_CONSOLE=y
 #
 # Non-8250 serial port support
 #
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_VR41XX=y
+CONFIG_SERIAL_VR41XX_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -565,6 +419,7 @@ CONFIG_WATCHDOG=y
 #
 # Ftape, the floppy tape device driver
 #
+CONFIG_GPIO_VR41XX=y
 # CONFIG_RAW_DRIVER is not set
 
 #
@@ -600,10 +455,6 @@ CONFIG_WATCHDOG=y
 #
 
 #
-# Multimedia Capabilities Port drivers
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -611,7 +462,6 @@ CONFIG_WATCHDOG=y
 #
 # Digital Video Broadcasting Devices
 #
-# CONFIG_DVB is not set
 
 #
 # Graphics support
@@ -635,6 +485,7 @@ CONFIG_DUMMY_CONSOLE=y
 #
 # CONFIG_USB_ARCH_HAS_HCD is not set
 # CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -651,12 +502,30 @@ CONFIG_DUMMY_CONSOLE=y
 # CONFIG_MMC is not set
 
 #
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
 # InfiniBand support
 #
 
 #
-# SN Devices
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
 #
+# CONFIG_RTC_CLASS is not set
 
 #
 # File systems
@@ -669,13 +538,12 @@ CONFIG_EXT2_FS=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
-CONFIG_AUTOFS_FS=y
+# CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=y
 CONFIG_FUSE_FS=m
 
@@ -698,10 +566,9 @@ CONFIG_FUSE_FS=m
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
+CONFIG_TMPFS=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-CONFIG_RELAYFS_FS=m
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -722,29 +589,6 @@ CONFIG_RELAYFS_FS=m
 # CONFIG_UFS_FS is not set
 
 #
-# Network File Systems
-#
-CONFIG_NFS_FS=m
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=m
-# CONFIG_NFSD_V3 is not set
-# CONFIG_NFSD_TCP is not set
-CONFIG_LOCKD=m
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
@@ -767,44 +611,20 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_FS is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE="console=ttyVR0,19200 mem=8M"
 
 #
 # Security options
 #
-CONFIG_KEYS=y
-CONFIG_KEYS_DEBUG_PROC_KEYS=y
+# CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 
 #
 # Cryptographic options
 #
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO is not set
 
 #
 # Hardware crypto devices
@@ -814,8 +634,6 @@ CONFIG_CRYPTO_CRC32C=m
 # Library routines
 #
 # CONFIG_CRC_CCITT is not set
-CONFIG_CRC16=m
-CONFIG_CRC32=m
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
+# CONFIG_CRC16 is not set
+# CONFIG_CRC32 is not set
+# CONFIG_LIBCRC32C is not set
diff --git a/arch/mips/configs/ev64120_defconfig b/arch/mips/configs/ev64120_defconfig
index f2d43be69007..7067f608b22c 100644
--- a/arch/mips/configs/ev64120_defconfig
+++ b/arch/mips/configs/ev64120_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16-rc1
-# Fri Jan 27 15:40:05 2006
+# Linux kernel version: 2.6.17-rc2
+# Mon Apr 24 14:51:02 2006
 #
 CONFIG_MIPS=y
 
@@ -65,6 +65,8 @@ CONFIG_MIPS_EV64120=y
 # CONFIG_TOSHIBA_RBTX4938 is not set
 # CONFIG_EVB_PCI1 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
@@ -116,7 +118,6 @@ CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_64KB is not set
 # CONFIG_MIPS_MT is not set
 # CONFIG_64BIT_PHYS_ADDR is not set
-# CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
@@ -138,7 +139,6 @@ CONFIG_PREEMPT_NONE=y
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 
@@ -154,6 +154,7 @@ CONFIG_SYSVIPC=y
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_RELAY=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EMBEDDED=y
@@ -167,10 +168,6 @@ CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
 CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -182,7 +179,6 @@ CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 # CONFIG_KMOD is not set
@@ -191,6 +187,8 @@ CONFIG_MODULE_SRCVERSION_ALL=y
 # Block layer
 #
 # CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
 
 #
 # IO Schedulers
@@ -210,7 +208,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 #
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
-CONFIG_PCI_LEGACY_PROC=y
 CONFIG_MMU=y
 
 #
@@ -238,6 +235,7 @@ CONFIG_NET=y
 #
 # Networking options
 #
+# CONFIG_NETDEBUG is not set
 # CONFIG_PACKET is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
@@ -258,12 +256,15 @@ CONFIG_IP_PNP=y
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETFILTER is not set
 
 #
@@ -275,6 +276,11 @@ CONFIG_TCP_CONG_BIC=y
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
@@ -284,11 +290,6 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
@@ -309,6 +310,9 @@ CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
 CONFIG_IEEE80211_CRYPT_WEP=m
 CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_SOFTMAC=m
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+CONFIG_WIRELESS_EXT=y
 
 #
 # Device Drivers
@@ -352,7 +356,7 @@ CONFIG_CONNECTOR=m
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
+# CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
@@ -550,6 +554,7 @@ CONFIG_HW_CONSOLE=y
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
 CONFIG_SERIAL_8250_NR_UARTS=4
 CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_8250_EXTENDED is not set
@@ -559,6 +564,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -617,10 +623,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 
 #
-# Multimedia Capabilities Port drivers
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -651,6 +653,7 @@ CONFIG_DUMMY_CONSOLE=y
 #
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
 
 #
@@ -668,13 +671,31 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_MMC is not set
 
 #
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
 # InfiniBand support
 #
 # CONFIG_INFINIBAND is not set
 
 #
-# SN Devices
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
 #
+# CONFIG_RTC_CLASS is not set
 
 #
 # File systems
@@ -719,7 +740,6 @@ CONFIG_SYSFS=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-CONFIG_RELAYFS_FS=m
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -783,6 +803,7 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_FS is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs rw nfsroot=192.168.1.1:/mnt/disk2/fs.gal ip=192.168.1.211:192.168.1.1:::gt::"
 
diff --git a/arch/mips/configs/ev96100_defconfig b/arch/mips/configs/ev96100_defconfig
index ac5841c4b698..00b56ed0e638 100644
--- a/arch/mips/configs/ev96100_defconfig
+++ b/arch/mips/configs/ev96100_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16-rc1
-# Fri Jan 27 15:40:06 2006
+# Linux kernel version: 2.6.17-rc2
+# Mon Apr 24 14:51:03 2006
 #
 CONFIG_MIPS=y
 
@@ -64,6 +64,8 @@ CONFIG_MIPS_EV96100=y
 # CONFIG_TOSHIBA_RBTX4927 is not set
 # CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
@@ -119,7 +121,6 @@ CONFIG_RM7000_CPU_SCACHE=y
 CONFIG_CPU_HAS_PREFETCH=y
 # CONFIG_MIPS_MT is not set
 # CONFIG_64BIT_PHYS_ADDR is not set
-# CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
@@ -142,7 +143,6 @@ CONFIG_PREEMPT_NONE=y
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 
@@ -158,6 +158,7 @@ CONFIG_SYSVIPC=y
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_RELAY=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EMBEDDED=y
@@ -171,10 +172,6 @@ CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
 CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -186,7 +183,6 @@ CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 # CONFIG_KMOD is not set
@@ -195,6 +191,8 @@ CONFIG_MODULE_SRCVERSION_ALL=y
 # Block layer
 #
 # CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
 
 #
 # IO Schedulers
@@ -240,6 +238,7 @@ CONFIG_NET=y
 #
 # Networking options
 #
+# CONFIG_NETDEBUG is not set
 # CONFIG_PACKET is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
@@ -260,12 +259,15 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETFILTER is not set
 
 #
@@ -277,6 +279,11 @@ CONFIG_TCP_CONG_BIC=y
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
@@ -286,11 +293,6 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
@@ -311,6 +313,9 @@ CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
 CONFIG_IEEE80211_CRYPT_WEP=m
 CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_SOFTMAC=m
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+CONFIG_WIRELESS_EXT=y
 
 #
 # Device Drivers
@@ -349,7 +354,7 @@ CONFIG_CONNECTOR=m
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
+# CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
@@ -567,10 +572,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 
 #
-# Multimedia Capabilities Port drivers
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -601,6 +602,7 @@ CONFIG_DUMMY_CONSOLE=y
 #
 # CONFIG_USB_ARCH_HAS_HCD is not set
 # CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -617,12 +619,30 @@ CONFIG_DUMMY_CONSOLE=y
 # CONFIG_MMC is not set
 
 #
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
 # InfiniBand support
 #
 
 #
-# SN Devices
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
 #
+# CONFIG_RTC_CLASS is not set
 
 #
 # File systems
@@ -667,7 +687,6 @@ CONFIG_SYSFS=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-CONFIG_RELAYFS_FS=m
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -731,6 +750,7 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_FS is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 
diff --git a/arch/mips/configs/ip22_defconfig b/arch/mips/configs/ip22_defconfig
index 42d5cd7927cb..607e2985ffe3 100644
--- a/arch/mips/configs/ip22_defconfig
+++ b/arch/mips/configs/ip22_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16-rc1
-# Fri Jan 27 15:39:51 2006
+# Linux kernel version: 2.6.17-rc2
+# Mon Apr 24 14:50:54 2006
 #
 CONFIG_MIPS=y
 
@@ -64,6 +64,8 @@ CONFIG_SGI_IP22=y
 # CONFIG_TOSHIBA_RBTX4927 is not set
 # CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_ARC=y
 CONFIG_DMA_NONCOHERENT=y
@@ -121,7 +123,6 @@ CONFIG_BOARD_SCACHE=y
 CONFIG_IP22_CPU_SCACHE=y
 # CONFIG_MIPS_MT is not set
 # CONFIG_64BIT_PHYS_ADDR is not set
-# CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
@@ -143,7 +144,6 @@ CONFIG_PREEMPT_VOLUNTARY=y
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 
@@ -160,6 +160,7 @@ CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
+CONFIG_RELAY=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EMBEDDED=y
@@ -173,10 +174,6 @@ CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
 CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -188,7 +185,6 @@ CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
@@ -197,6 +193,8 @@ CONFIG_KMOD=y
 # Block layer
 #
 # CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
 
 #
 # IO Schedulers
@@ -242,6 +240,7 @@ CONFIG_NET=y
 #
 # Networking options
 #
+# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -264,6 +263,7 @@ CONFIG_IP_PNP_BOOTP=y
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
 CONFIG_INET_TUNNEL=m
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
@@ -305,9 +305,12 @@ CONFIG_IP_VS_NQ=m
 CONFIG_IP_VS_FTP=m
 CONFIG_IPV6=m
 CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
+CONFIG_INET6_XFRM_TUNNEL=m
 CONFIG_INET6_TUNNEL=m
 CONFIG_IPV6_TUNNEL=m
 CONFIG_NETFILTER=y
@@ -330,11 +333,14 @@ CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
 CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
 CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
 CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
 CONFIG_NETFILTER_XT_MATCH_HELPER=m
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
 CONFIG_NETFILTER_XT_MATCH_MAC=m
 CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
 CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
 CONFIG_NETFILTER_XT_MATCH_REALM=m
 CONFIG_NETFILTER_XT_MATCH_SCTP=m
@@ -357,20 +363,19 @@ CONFIG_IP_NF_IRC=m
 CONFIG_IP_NF_TFTP=m
 CONFIG_IP_NF_AMANDA=m
 CONFIG_IP_NF_PPTP=m
+CONFIG_IP_NF_H323=m
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
 CONFIG_IP_NF_MATCH_TOS=m
 CONFIG_IP_NF_MATCH_RECENT=m
 CONFIG_IP_NF_MATCH_ECN=m
 CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
+CONFIG_IP_NF_MATCH_AH=m
 CONFIG_IP_NF_MATCH_TTL=m
 CONFIG_IP_NF_MATCH_OWNER=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
 CONFIG_IP_NF_MATCH_HASHLIMIT=m
-CONFIG_IP_NF_MATCH_POLICY=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
@@ -388,6 +393,7 @@ CONFIG_IP_NF_NAT_FTP=m
 CONFIG_IP_NF_NAT_TFTP=m
 CONFIG_IP_NF_NAT_AMANDA=m
 CONFIG_IP_NF_NAT_PPTP=m
+CONFIG_IP_NF_NAT_H323=m
 CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_TOS=m
 CONFIG_IP_NF_TARGET_ECN=m
@@ -408,12 +414,10 @@ CONFIG_IP6_NF_MATCH_RT=m
 CONFIG_IP6_NF_MATCH_OPTS=m
 CONFIG_IP6_NF_MATCH_FRAG=m
 CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_MULTIPORT=m
 CONFIG_IP6_NF_MATCH_OWNER=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AHESP=m
+CONFIG_IP6_NF_MATCH_AH=m
 CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_MATCH_POLICY=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_LOG=m
 CONFIG_IP6_NF_TARGET_REJECT=m
@@ -435,6 +439,11 @@ CONFIG_IP_SCTP=m
 # CONFIG_SCTP_HMAC_NONE is not set
 # CONFIG_SCTP_HMAC_SHA1 is not set
 CONFIG_SCTP_HMAC_MD5=y
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
@@ -444,11 +453,6 @@ CONFIG_SCTP_HMAC_MD5=y
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
 CONFIG_NET_DIVERT=y
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
@@ -508,6 +512,9 @@ CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
 CONFIG_IEEE80211_CRYPT_WEP=m
 CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_SOFTMAC=m
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+CONFIG_WIRELESS_EXT=y
 
 #
 # Device Drivers
@@ -546,7 +553,7 @@ CONFIG_CONNECTOR=m
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
+# CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
@@ -812,10 +819,6 @@ CONFIG_MAX_RAW_DEVS=256
 #
 
 #
-# Multimedia Capabilities Port drivers
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -857,6 +860,7 @@ CONFIG_LOGO_SGI_CLUT224=y
 #
 # CONFIG_USB_ARCH_HAS_HCD is not set
 # CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -873,12 +877,30 @@ CONFIG_LOGO_SGI_CLUT224=y
 # CONFIG_MMC is not set
 
 #
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
 # InfiniBand support
 #
 
 #
-# SN Devices
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
 #
+# CONFIG_RTC_CLASS is not set
 
 #
 # File systems
@@ -944,7 +966,6 @@ CONFIG_SYSFS=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-CONFIG_RELAYFS_FS=m
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -963,7 +984,6 @@ CONFIG_EFS_FS=m
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_SYSV_FS is not set
 CONFIG_UFS_FS=m
-# CONFIG_UFS_FS_WRITE is not set
 
 #
 # Network File Systems
@@ -1078,6 +1098,7 @@ CONFIG_NLS_UTF8=m
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_FS is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 
diff --git a/arch/mips/configs/ip27_defconfig b/arch/mips/configs/ip27_defconfig
index 8c40590737e1..f724b4b2ecf2 100644
--- a/arch/mips/configs/ip27_defconfig
+++ b/arch/mips/configs/ip27_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16-rc4
-# Tue Feb 21 13:44:31 2006
+# Linux kernel version: 2.6.17-rc2
+# Mon Apr 24 14:51:04 2006
 #
 CONFIG_MIPS=y
 
@@ -70,6 +70,8 @@ CONFIG_NUMA=y
 # CONFIG_REPLICATE_KTEXT is not set
 # CONFIG_REPLICATE_EXHANDLERS is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_ARC=y
 CONFIG_DMA_IP27=y
@@ -123,6 +125,7 @@ CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_NODES_SHIFT=6
 CONFIG_SELECT_MEMORY_MODEL=y
 # CONFIG_FLATMEM_MANUAL is not set
 CONFIG_DISCONTIGMEM_MANUAL=y
@@ -162,6 +165,7 @@ CONFIG_SYSCTL=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_CPUSETS=y
+CONFIG_RELAY=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EMBEDDED=y
@@ -175,10 +179,6 @@ CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
 CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -190,7 +190,6 @@ CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODVERSIONS is not set
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
@@ -199,6 +198,7 @@ CONFIG_STOP_MACHINE=y
 #
 # Block layer
 #
+# CONFIG_BLK_DEV_IO_TRACE is not set
 
 #
 # IO Schedulers
@@ -219,7 +219,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_LEGACY_PROC=y
 CONFIG_MMU=y
 
 #
@@ -237,6 +236,7 @@ CONFIG_MMU=y
 #
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
+# CONFIG_BUILD_ELF64 is not set
 CONFIG_MIPS32_COMPAT=y
 CONFIG_COMPAT=y
 CONFIG_MIPS32_O32=y
@@ -274,12 +274,15 @@ CONFIG_IP_PNP=y
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETFILTER is not set
 
 #
@@ -363,6 +366,9 @@ CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
 CONFIG_IEEE80211_CRYPT_WEP=m
 CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_SOFTMAC=m
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+CONFIG_WIRELESS_EXT=y
 
 #
 # Device Drivers
@@ -407,7 +413,7 @@ CONFIG_BLK_DEV_CRYPTOLOOP=m
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
+# CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
@@ -473,7 +479,6 @@ CONFIG_SCSI_SAS_ATTRS=m
 # CONFIG_SCSI_INIA100 is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
 CONFIG_SCSI_QLOGIC_1280=y
 # CONFIG_SCSI_QLA_FC is not set
 # CONFIG_SCSI_LPFC is not set
@@ -491,6 +496,7 @@ CONFIG_MD_RAID0=y
 CONFIG_MD_RAID1=y
 CONFIG_MD_RAID10=m
 CONFIG_MD_RAID5=y
+CONFIG_MD_RAID5_RESHAPE=y
 CONFIG_MD_RAID6=m
 CONFIG_MD_MULTIPATH=m
 CONFIG_MD_FAULTY=m
@@ -654,6 +660,7 @@ CONFIG_SERIO_RAW=m
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
 CONFIG_SERIAL_8250_NR_UARTS=4
 CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
@@ -727,10 +734,6 @@ CONFIG_SGI_IP27_RTC=y
 #
 
 #
-# Multimedia Capabilities Port drivers
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -755,6 +758,7 @@ CONFIG_SGI_IP27_RTC=y
 #
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
 
 #
@@ -772,17 +776,31 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_MMC is not set
 
 #
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
 # InfiniBand support
 #
 # CONFIG_INFINIBAND is not set
 
 #
-# SN Devices
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
 #
 
 #
-# EDAC - error detection and reporting (RAS)
+# Real Time Clock
 #
+# CONFIG_RTC_CLASS is not set
 
 #
 # File systems
@@ -840,7 +858,6 @@ CONFIG_SYSFS=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-CONFIG_RELAYFS_FS=m
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -922,6 +939,7 @@ CONFIG_SGI_PARTITION=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=15
+# CONFIG_DEBUG_FS is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 
diff --git a/arch/mips/configs/ip32_defconfig b/arch/mips/configs/ip32_defconfig
index 7fdcaf51face..8f11d3565b2d 100644
--- a/arch/mips/configs/ip32_defconfig
+++ b/arch/mips/configs/ip32_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16-rc1
-# Fri Jan 27 15:40:09 2006
+# Linux kernel version: 2.6.17-rc2
+# Mon Apr 24 14:51:05 2006
 #
 CONFIG_MIPS=y
 
@@ -64,6 +64,8 @@ CONFIG_SGI_IP32=y
 # CONFIG_TOSHIBA_RBTX4927 is not set
 # CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_ARC=y
 CONFIG_DMA_IP32=y
@@ -142,7 +144,6 @@ CONFIG_PREEMPT_VOLUNTARY=y
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 
@@ -159,6 +160,7 @@ CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_RELAY=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EMBEDDED=y
@@ -172,10 +174,6 @@ CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
 CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -189,6 +187,7 @@ CONFIG_BASE_SMALL=0
 #
 # Block layer
 #
+# CONFIG_BLK_DEV_IO_TRACE is not set
 
 #
 # IO Schedulers
@@ -208,7 +207,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 #
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
-CONFIG_PCI_LEGACY_PROC=y
 CONFIG_MMU=y
 
 #
@@ -226,6 +224,7 @@ CONFIG_MMU=y
 #
 CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=y
+# CONFIG_BUILD_ELF64 is not set
 CONFIG_MIPS32_COMPAT=y
 CONFIG_COMPAT=y
 CONFIG_MIPS32_O32=y
@@ -240,6 +239,7 @@ CONFIG_NET=y
 #
 # Networking options
 #
+# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -261,12 +261,15 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=y
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETFILTER is not set
 
 #
@@ -278,6 +281,11 @@ CONFIG_TCP_CONG_BIC=y
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
@@ -287,11 +295,6 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
@@ -312,6 +315,9 @@ CONFIG_IEEE80211=y
 # CONFIG_IEEE80211_DEBUG is not set
 CONFIG_IEEE80211_CRYPT_WEP=y
 CONFIG_IEEE80211_CRYPT_CCMP=y
+CONFIG_IEEE80211_SOFTMAC=y
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+CONFIG_WIRELESS_EXT=y
 
 #
 # Device Drivers
@@ -357,7 +363,7 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
+# CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CDROM_PKTCDVD=y
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
@@ -428,7 +434,6 @@ CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
 # CONFIG_SCSI_INIA100 is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
 # CONFIG_SCSI_QLA_FC is not set
 # CONFIG_SCSI_LPFC is not set
@@ -615,6 +620,7 @@ CONFIG_HW_CONSOLE=y
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
 CONFIG_SERIAL_8250_NR_UARTS=4
 CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_8250_EXTENDED is not set
@@ -624,6 +630,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -682,10 +689,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 
 #
-# Multimedia Capabilities Port drivers
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -716,6 +719,7 @@ CONFIG_DUMMY_CONSOLE=y
 #
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
 
 #
@@ -733,13 +737,31 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_MMC is not set
 
 #
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
 # InfiniBand support
 #
 # CONFIG_INFINIBAND is not set
 
 #
-# SN Devices
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
 #
+# CONFIG_RTC_CLASS is not set
 
 #
 # File systems
@@ -784,7 +806,6 @@ CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-CONFIG_RELAYFS_FS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -861,6 +882,8 @@ CONFIG_SGI_PARTITION=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_FS is not set
+# CONFIG_UNWIND_INFO is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 
diff --git a/arch/mips/configs/it8172_defconfig b/arch/mips/configs/it8172_defconfig
index c716996d9eca..757adf23853d 100644
--- a/arch/mips/configs/it8172_defconfig
+++ b/arch/mips/configs/it8172_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16-rc1
-# Fri Jan 27 15:40:10 2006
+# Linux kernel version: 2.6.17-rc2
+# Mon Apr 24 14:51:05 2006
 #
 CONFIG_MIPS=y
 
@@ -65,6 +65,8 @@ CONFIG_MIPS_ITE8172=y
 # CONFIG_TOSHIBA_RBTX4938 is not set
 # CONFIG_IT8172_REVC is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
@@ -115,7 +117,6 @@ CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 # CONFIG_MIPS_MT is not set
-# CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
@@ -137,7 +138,6 @@ CONFIG_PREEMPT_NONE=y
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 
@@ -154,6 +154,7 @@ CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_RELAY=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EMBEDDED=y
@@ -167,10 +168,6 @@ CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
 CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -183,7 +180,6 @@ CONFIG_OBSOLETE_INTERMODULE=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
@@ -192,6 +188,8 @@ CONFIG_KMOD=y
 # Block layer
 #
 # CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
 
 #
 # IO Schedulers
@@ -237,6 +235,7 @@ CONFIG_NET=y
 #
 # Networking options
 #
+# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -258,12 +257,15 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETFILTER is not set
 
 #
@@ -275,6 +277,11 @@ CONFIG_TCP_CONG_BIC=y
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
@@ -284,11 +291,6 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
@@ -309,6 +311,9 @@ CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
 CONFIG_IEEE80211_CRYPT_WEP=m
 CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_SOFTMAC=m
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+CONFIG_WIRELESS_EXT=y
 
 #
 # Device Drivers
@@ -387,7 +392,6 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
 # CONFIG_MTD_BLOCK2MTD is not set
 
 #
@@ -424,7 +428,7 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
+# CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
@@ -666,10 +670,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 
 #
-# Multimedia Capabilities Port drivers
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -704,7 +704,6 @@ CONFIG_SOUND=y
 # Open Sound System
 #
 CONFIG_SOUND_PRIME=y
-# CONFIG_OBSOLETE_OSS_DRIVER is not set
 CONFIG_SOUND_IT8172=y
 # CONFIG_SOUND_MSNDCLAS is not set
 # CONFIG_SOUND_MSNDPIN is not set
@@ -714,6 +713,7 @@ CONFIG_SOUND_IT8172=y
 #
 # CONFIG_USB_ARCH_HAS_HCD is not set
 # CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -730,12 +730,30 @@ CONFIG_SOUND_IT8172=y
 # CONFIG_MMC is not set
 
 #
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
 # InfiniBand support
 #
 
 #
-# SN Devices
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
 #
+# CONFIG_RTC_CLASS is not set
 
 #
 # File systems
@@ -780,7 +798,6 @@ CONFIG_SYSFS=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-CONFIG_RELAYFS_FS=m
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -846,6 +863,7 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_FS is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 
diff --git a/arch/mips/configs/ivr_defconfig b/arch/mips/configs/ivr_defconfig
index a8376d125e11..021761a8a237 100644
--- a/arch/mips/configs/ivr_defconfig
+++ b/arch/mips/configs/ivr_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16-rc1
-# Fri Jan 27 15:40:11 2006
+# Linux kernel version: 2.6.17-rc2
+# Mon Apr 24 14:51:06 2006
 #
 CONFIG_MIPS=y
 
@@ -64,6 +64,8 @@ CONFIG_MIPS_IVR=y
 # CONFIG_TOSHIBA_RBTX4927 is not set
 # CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
@@ -112,7 +114,6 @@ CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 # CONFIG_MIPS_MT is not set
-# CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
@@ -134,7 +135,6 @@ CONFIG_PREEMPT_NONE=y
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 
@@ -151,6 +151,7 @@ CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_RELAY=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EMBEDDED=y
@@ -164,10 +165,6 @@ CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
 CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -179,7 +176,6 @@ CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
@@ -188,6 +184,8 @@ CONFIG_KMOD=y
 # Block layer
 #
 # CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
 
 #
 # IO Schedulers
@@ -207,7 +205,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 #
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
-CONFIG_PCI_LEGACY_PROC=y
 CONFIG_MMU=y
 
 #
@@ -235,6 +232,7 @@ CONFIG_NET=y
 #
 # Networking options
 #
+# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -256,12 +254,15 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETFILTER is not set
 
 #
@@ -273,6 +274,11 @@ CONFIG_TCP_CONG_BIC=y
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
@@ -282,11 +288,6 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
@@ -307,6 +308,9 @@ CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
 CONFIG_IEEE80211_CRYPT_WEP=m
 CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_SOFTMAC=m
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+CONFIG_WIRELESS_EXT=y
 
 #
 # Device Drivers
@@ -350,7 +354,7 @@ CONFIG_CONNECTOR=m
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
+# CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
@@ -565,6 +569,7 @@ CONFIG_IT8172_SCR1=y
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
 CONFIG_SERIAL_8250_NR_UARTS=4
 CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_8250_EXTENDED is not set
@@ -574,6 +579,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -631,10 +637,6 @@ CONFIG_RTC=y
 #
 
 #
-# Multimedia Capabilities Port drivers
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -665,6 +667,7 @@ CONFIG_DUMMY_CONSOLE=y
 #
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
 
 #
@@ -682,13 +685,31 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_MMC is not set
 
 #
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
 # InfiniBand support
 #
 # CONFIG_INFINIBAND is not set
 
 #
-# SN Devices
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
 #
+# CONFIG_RTC_CLASS is not set
 
 #
 # File systems
@@ -733,7 +754,6 @@ CONFIG_SYSFS=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-CONFIG_RELAYFS_FS=m
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -797,6 +817,7 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_FS is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 
diff --git a/arch/mips/configs/jaguar-atx_defconfig b/arch/mips/configs/jaguar-atx_defconfig
index 316015379dbc..08f6c30b0abc 100644
--- a/arch/mips/configs/jaguar-atx_defconfig
+++ b/arch/mips/configs/jaguar-atx_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16-rc1
-# Fri Jan 27 15:40:12 2006
+# Linux kernel version: 2.6.17-rc2
+# Mon Apr 24 14:51:06 2006
 #
 CONFIG_MIPS=y
 
@@ -65,6 +65,8 @@ CONFIG_MOMENCO_JAGUAR_ATX=y
 # CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_JAGUAR_DMALOW=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
@@ -122,7 +124,6 @@ CONFIG_RM7000_CPU_SCACHE=y
 CONFIG_CPU_HAS_PREFETCH=y
 # CONFIG_MIPS_MT is not set
 # CONFIG_64BIT_PHYS_ADDR is not set
-# CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
@@ -144,7 +145,6 @@ CONFIG_PREEMPT_NONE=y
 # Code maturity level options
 #
 # CONFIG_EXPERIMENTAL is not set
-CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 
@@ -160,6 +160,7 @@ CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
+CONFIG_RELAY=y
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
@@ -172,10 +173,6 @@ CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
 CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -186,7 +183,6 @@ CONFIG_BASE_SMALL=0
 #
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODVERSIONS is not set
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
@@ -195,6 +191,8 @@ CONFIG_KMOD=y
 # Block layer
 #
 # CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
 
 #
 # IO Schedulers
@@ -214,7 +212,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 #
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
-CONFIG_PCI_LEGACY_PROC=y
 CONFIG_MMU=y
 
 #
@@ -241,6 +238,7 @@ CONFIG_NET=y
 #
 # Networking options
 #
+# CONFIG_NETDEBUG is not set
 # CONFIG_PACKET is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
@@ -260,16 +258,19 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_BIC=y
 CONFIG_IPV6=m
 CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
+CONFIG_INET6_XFRM_TUNNEL=m
 CONFIG_INET6_TUNNEL=m
 CONFIG_IPV6_TUNNEL=m
 # CONFIG_NETFILTER is not set
@@ -338,10 +339,9 @@ CONFIG_CONNECTOR=m
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
+# CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
 CONFIG_ATA_OVER_ETH=m
 
 #
@@ -423,6 +423,7 @@ CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_FORCEDETH is not set
 # CONFIG_DGRS is not set
 CONFIG_EEPRO100=y
 # CONFIG_E100 is not set
@@ -446,6 +447,7 @@ CONFIG_EEPRO100=y
 # CONFIG_HAMACHI is not set
 # CONFIG_R8169 is not set
 # CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
@@ -514,6 +516,7 @@ CONFIG_MV643XX_ETH_2=y
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
 CONFIG_SERIAL_8250_NR_UARTS=4
 CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_8250_EXTENDED is not set
@@ -523,6 +526,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -579,10 +583,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 
 #
-# Multimedia Capabilities Port drivers
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -607,6 +607,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
 
 #
@@ -624,12 +625,29 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_MMC is not set
 
 #
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
 # InfiniBand support
 #
 # CONFIG_INFINIBAND is not set
 
 #
-# SN Devices
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
 #
 
 #
@@ -672,7 +690,6 @@ CONFIG_SYSFS=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-CONFIG_RELAYFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -718,6 +735,7 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_FS is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 
diff --git a/arch/mips/configs/jmr3927_defconfig b/arch/mips/configs/jmr3927_defconfig
index 53fbef1ac25d..38b1e026e10d 100644
--- a/arch/mips/configs/jmr3927_defconfig
+++ b/arch/mips/configs/jmr3927_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16-rc1
-# Fri Jan 27 15:40:13 2006
+# Linux kernel version: 2.6.17-rc2
+# Mon Apr 24 14:51:07 2006
 #
 CONFIG_MIPS=y
 
@@ -64,6 +64,8 @@ CONFIG_TOSHIBA_JMR3927=y
 # CONFIG_TOSHIBA_RBTX4927 is not set
 # CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
@@ -111,7 +113,6 @@ CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 # CONFIG_MIPS_MT is not set
-# CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
@@ -133,7 +134,6 @@ CONFIG_RTC_DS1742=y
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 
@@ -149,6 +149,7 @@ CONFIG_SYSVIPC=y
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_RELAY=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EMBEDDED=y
@@ -162,10 +163,6 @@ CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
 CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -180,6 +177,8 @@ CONFIG_BASE_SMALL=0
 # Block layer
 #
 # CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
 
 #
 # IO Schedulers
@@ -199,7 +198,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 #
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
-CONFIG_PCI_LEGACY_PROC=y
 CONFIG_MMU=y
 
 #
@@ -227,6 +225,7 @@ CONFIG_NET=y
 #
 # Networking options
 #
+# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -248,12 +247,15 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=y
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETFILTER is not set
 
 #
@@ -265,6 +267,11 @@ CONFIG_TCP_CONG_BIC=y
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
@@ -274,11 +281,6 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
@@ -299,6 +301,9 @@ CONFIG_IEEE80211=y
 # CONFIG_IEEE80211_DEBUG is not set
 CONFIG_IEEE80211_CRYPT_WEP=y
 CONFIG_IEEE80211_CRYPT_CCMP=y
+CONFIG_IEEE80211_SOFTMAC=y
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+CONFIG_WIRELESS_EXT=y
 
 #
 # Device Drivers
@@ -343,7 +348,7 @@ CONFIG_PROC_EVENTS=y
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
+# CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CDROM_PKTCDVD=y
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
@@ -551,7 +556,12 @@ CONFIG_SERIAL_NONSTANDARD=y
 #
 # Non-8250 serial port support
 #
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_TXX9=y
 CONFIG_HAS_TXX9_SERIAL=y
+# CONFIG_SERIAL_TXX9_CONSOLE is not set
+# CONFIG_SERIAL_TXX9_STDSERIAL is not set
+# CONFIG_SERIAL_JSM is not set
 # CONFIG_UNIX98_PTYS is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -610,10 +620,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 
 #
-# Multimedia Capabilities Port drivers
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -631,6 +637,7 @@ CONFIG_FB=y
 # CONFIG_FB_CFB_COPYAREA is not set
 # CONFIG_FB_CFB_IMAGEBLIT is not set
 # CONFIG_FB_MACMODES is not set
+CONFIG_FB_FIRMWARE_EDID=y
 # CONFIG_FB_MODE_HELPERS is not set
 # CONFIG_FB_TILEBLITTING is not set
 # CONFIG_FB_CIRRUS is not set
@@ -642,7 +649,6 @@ CONFIG_FB=y
 # CONFIG_FB_NVIDIA is not set
 # CONFIG_FB_RIVA is not set
 # CONFIG_FB_MATROX is not set
-# CONFIG_FB_RADEON_OLD is not set
 # CONFIG_FB_RADEON is not set
 # CONFIG_FB_ATY128 is not set
 # CONFIG_FB_ATY is not set
@@ -679,6 +685,7 @@ CONFIG_DUMMY_CONSOLE=y
 #
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
 
 #
@@ -696,13 +703,31 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_MMC is not set
 
 #
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
 # InfiniBand support
 #
 # CONFIG_INFINIBAND is not set
 
 #
-# SN Devices
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
 #
+# CONFIG_RTC_CLASS is not set
 
 #
 # File systems
@@ -745,7 +770,6 @@ CONFIG_SYSFS=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-CONFIG_RELAYFS_FS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -809,6 +833,8 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_FS is not set
+# CONFIG_UNWIND_INFO is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 
diff --git a/arch/mips/configs/lasat200_defconfig b/arch/mips/configs/lasat200_defconfig
index ef0fa9fc79d6..4d25990a0a05 100644
--- a/arch/mips/configs/lasat200_defconfig
+++ b/arch/mips/configs/lasat200_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16-rc1
-# Fri Jan 27 15:40:14 2006
+# Linux kernel version: 2.6.17-rc2
+# Mon Apr 24 14:51:07 2006
 #
 CONFIG_MIPS=y
 
@@ -68,6 +68,8 @@ CONFIG_PICVUE_PROC=y
 CONFIG_DS1603=y
 CONFIG_LASAT_SYSCTL=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
@@ -119,7 +121,6 @@ CONFIG_BOARD_SCACHE=y
 CONFIG_R5000_CPU_SCACHE=y
 # CONFIG_MIPS_MT is not set
 # CONFIG_64BIT_PHYS_ADDR is not set
-# CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
@@ -141,7 +142,6 @@ CONFIG_PREEMPT_NONE=y
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 
@@ -157,6 +157,7 @@ CONFIG_SYSVIPC=y
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_RELAY=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EMBEDDED=y
@@ -170,10 +171,6 @@ CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
 CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -186,7 +183,6 @@ CONFIG_OBSOLETE_INTERMODULE=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
@@ -195,6 +191,8 @@ CONFIG_KMOD=y
 # Block layer
 #
 # CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
 
 #
 # IO Schedulers
@@ -214,7 +212,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 #
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
-CONFIG_PCI_LEGACY_PROC=y
 CONFIG_MMU=y
 
 #
@@ -242,6 +239,7 @@ CONFIG_NET=y
 #
 # Networking options
 #
+# CONFIG_NETDEBUG is not set
 # CONFIG_PACKET is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
@@ -259,12 +257,15 @@ CONFIG_IP_FIB_HASH=y
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETFILTER is not set
 
 #
@@ -276,6 +277,11 @@ CONFIG_TCP_CONG_BIC=y
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
@@ -285,11 +291,6 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
@@ -310,6 +311,9 @@ CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
 CONFIG_IEEE80211_CRYPT_WEP=m
 CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_SOFTMAC=m
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+CONFIG_WIRELESS_EXT=y
 
 #
 # Device Drivers
@@ -366,7 +370,6 @@ CONFIG_MTD_CFI_I2=y
 # CONFIG_MTD_CFI_I8 is not set
 # CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_CFI_AMDSTD_RETRY=0
 # CONFIG_MTD_CFI_STAA is not set
 CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_RAM is not set
@@ -389,7 +392,6 @@ CONFIG_MTD_LASAT=y
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
 # CONFIG_MTD_BLOCK2MTD is not set
 
 #
@@ -430,7 +432,7 @@ CONFIG_MTD_LASAT=y
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
+# CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
@@ -672,6 +674,7 @@ CONFIG_HW_CONSOLE=y
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
 CONFIG_SERIAL_8250_NR_UARTS=4
 CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_8250_EXTENDED is not set
@@ -681,6 +684,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -739,10 +743,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 
 #
-# Multimedia Capabilities Port drivers
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -773,6 +773,7 @@ CONFIG_DUMMY_CONSOLE=y
 #
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
 
 #
@@ -790,13 +791,31 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_MMC is not set
 
 #
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
 # InfiniBand support
 #
 # CONFIG_INFINIBAND is not set
 
 #
-# SN Devices
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
 #
+# CONFIG_RTC_CLASS is not set
 
 #
 # File systems
@@ -847,7 +866,6 @@ CONFIG_SYSFS=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-CONFIG_RELAYFS_FS=m
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -914,6 +932,7 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_FS is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 
diff --git a/arch/mips/configs/malta_defconfig b/arch/mips/configs/malta_defconfig
index 367d279efdd9..977f52be51dc 100644
--- a/arch/mips/configs/malta_defconfig
+++ b/arch/mips/configs/malta_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16-rc1
-# Fri Jan 27 15:40:15 2006
+# Linux kernel version: 2.6.17-rc2
+# Mon Apr 24 14:51:08 2006
 #
 CONFIG_MIPS=y
 
@@ -64,6 +64,8 @@ CONFIG_MIPS_MALTA=y
 # CONFIG_TOSHIBA_RBTX4927 is not set
 # CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_DMA_NONCOHERENT=y
@@ -128,16 +130,21 @@ CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_CPU_HAS_PREFETCH=y
 CONFIG_MIPS_MT=y
+# CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_MT_SMP is not set
 CONFIG_MIPS_VPE_LOADER=y
+CONFIG_MIPS_MT_FPAFF=y
 CONFIG_MIPS_VPE_LOADER_TOM=y
 CONFIG_MIPS_VPE_APSP_API=y
+CONFIG_MIPS_APSP_KSPD=y
 # CONFIG_64BIT_PHYS_ADDR is not set
-# CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_LLSC=y
+# CONFIG_CPU_MIPSR2_IRQ_VI is not set
+# CONFIG_CPU_MIPSR2_IRQ_EI is not set
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
@@ -155,7 +162,6 @@ CONFIG_PREEMPT_NONE=y
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 
@@ -171,6 +177,7 @@ CONFIG_SYSVIPC=y
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_RELAY=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EMBEDDED=y
@@ -184,10 +191,6 @@ CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
 CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -199,7 +202,6 @@ CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
@@ -208,6 +210,8 @@ CONFIG_KMOD=y
 # Block layer
 #
 # CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
 
 #
 # IO Schedulers
@@ -227,7 +231,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 #
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
-CONFIG_PCI_LEGACY_PROC=y
 CONFIG_MMU=y
 
 #
@@ -255,6 +258,7 @@ CONFIG_NET=y
 #
 # Networking options
 #
+# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -287,6 +291,7 @@ CONFIG_SYN_COOKIES=y
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
 CONFIG_INET_TUNNEL=m
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
@@ -328,9 +333,12 @@ CONFIG_IP_VS_NQ=m
 CONFIG_IP_VS_FTP=m
 CONFIG_IPV6=m
 CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
+CONFIG_INET6_XFRM_TUNNEL=m
 CONFIG_INET6_TUNNEL=m
 CONFIG_IPV6_TUNNEL=m
 CONFIG_NETFILTER=y
@@ -354,11 +362,14 @@ CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
 CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
 CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
 CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
 CONFIG_NETFILTER_XT_MATCH_HELPER=m
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
 CONFIG_NETFILTER_XT_MATCH_MAC=m
 CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
 # CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
 CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
 CONFIG_NETFILTER_XT_MATCH_REALM=m
@@ -382,20 +393,19 @@ CONFIG_IP_NF_IRC=m
 CONFIG_IP_NF_TFTP=m
 CONFIG_IP_NF_AMANDA=m
 CONFIG_IP_NF_PPTP=m
+CONFIG_IP_NF_H323=m
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
 CONFIG_IP_NF_MATCH_TOS=m
 CONFIG_IP_NF_MATCH_RECENT=m
 CONFIG_IP_NF_MATCH_ECN=m
 CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
+CONFIG_IP_NF_MATCH_AH=m
 CONFIG_IP_NF_MATCH_TTL=m
 CONFIG_IP_NF_MATCH_OWNER=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
 CONFIG_IP_NF_MATCH_HASHLIMIT=m
-CONFIG_IP_NF_MATCH_POLICY=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
@@ -413,6 +423,7 @@ CONFIG_IP_NF_NAT_FTP=m
 CONFIG_IP_NF_NAT_TFTP=m
 CONFIG_IP_NF_NAT_AMANDA=m
 CONFIG_IP_NF_NAT_PPTP=m
+CONFIG_IP_NF_NAT_H323=m
 CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_TOS=m
 CONFIG_IP_NF_TARGET_ECN=m
@@ -433,12 +444,10 @@ CONFIG_IP6_NF_MATCH_RT=m
 CONFIG_IP6_NF_MATCH_OPTS=m
 CONFIG_IP6_NF_MATCH_FRAG=m
 CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_MULTIPORT=m
 CONFIG_IP6_NF_MATCH_OWNER=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AHESP=m
+CONFIG_IP6_NF_MATCH_AH=m
 CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_MATCH_POLICY=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_LOG=m
 CONFIG_IP6_NF_TARGET_REJECT=m
@@ -484,6 +493,11 @@ CONFIG_IP_SCTP=m
 # CONFIG_SCTP_HMAC_NONE is not set
 # CONFIG_SCTP_HMAC_SHA1 is not set
 CONFIG_SCTP_HMAC_MD5=y
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 CONFIG_BRIDGE=m
 CONFIG_VLAN_8021Q=m
@@ -498,11 +512,6 @@ CONFIG_IPDDP_ENCAP=y
 CONFIG_IPDDP_DECAP=y
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
 CONFIG_NET_DIVERT=y
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
@@ -562,6 +571,9 @@ CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
 CONFIG_IEEE80211_CRYPT_WEP=m
 CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_SOFTMAC=m
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+CONFIG_WIRELESS_EXT=y
 
 #
 # Device Drivers
@@ -734,7 +746,6 @@ CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
 # CONFIG_SCSI_INIA100 is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
 # CONFIG_SCSI_QLA_FC is not set
 # CONFIG_SCSI_LPFC is not set
@@ -753,6 +764,7 @@ CONFIG_MD_RAID0=m
 CONFIG_MD_RAID1=m
 CONFIG_MD_RAID10=m
 CONFIG_MD_RAID5=m
+CONFIG_MD_RAID5_RESHAPE=y
 CONFIG_MD_RAID6=m
 CONFIG_MD_MULTIPATH=m
 CONFIG_MD_FAULTY=m
@@ -956,6 +968,7 @@ CONFIG_HW_CONSOLE=y
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
 CONFIG_SERIAL_8250_NR_UARTS=4
 CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_8250_EXTENDED is not set
@@ -965,6 +978,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -1022,10 +1036,6 @@ CONFIG_RTC=y
 #
 
 #
-# Multimedia Capabilities Port drivers
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -1056,6 +1066,7 @@ CONFIG_DUMMY_CONSOLE=y
 #
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
 
 #
@@ -1073,13 +1084,31 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_MMC is not set
 
 #
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
 # InfiniBand support
 #
 # CONFIG_INFINIBAND is not set
 
 #
-# SN Devices
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
 #
+# CONFIG_RTC_CLASS is not set
 
 #
 # File systems
@@ -1154,7 +1183,6 @@ CONFIG_SYSFS=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-CONFIG_RELAYFS_FS=m
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -1174,7 +1202,6 @@ CONFIG_VXFS_FS=m
 # CONFIG_QNX4FS_FS is not set
 CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
-# CONFIG_UFS_FS_WRITE is not set
 
 #
 # Network File Systems
@@ -1266,6 +1293,7 @@ CONFIG_NLS_UTF8=m
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_FS is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 
diff --git a/arch/mips/configs/mipssim_defconfig b/arch/mips/configs/mipssim_defconfig
index fe78961762b8..00560e0143f1 100644
--- a/arch/mips/configs/mipssim_defconfig
+++ b/arch/mips/configs/mipssim_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16-rc1
-# Fri Jan 27 15:40:16 2006
+# Linux kernel version: 2.6.17-rc2
+# Mon Apr 24 14:51:09 2006
 #
 CONFIG_MIPS=y
 
@@ -64,6 +64,8 @@ CONFIG_MIPS_SIM=y
 # CONFIG_TOSHIBA_RBTX4927 is not set
 # CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
@@ -114,16 +116,19 @@ CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_CPU_HAS_PREFETCH=y
 CONFIG_MIPS_MT=y
+# CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_MT_SMP is not set
 CONFIG_MIPS_VPE_LOADER=y
+CONFIG_MIPS_MT_FPAFF=y
 CONFIG_MIPS_VPE_LOADER_TOM=y
 CONFIG_MIPS_VPE_APSP_API=y
+CONFIG_MIPS_APSP_KSPD=y
 # CONFIG_64BIT_PHYS_ADDR is not set
-# CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
@@ -141,7 +146,6 @@ CONFIG_PREEMPT_NONE=y
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 
@@ -157,6 +161,7 @@ CONFIG_SYSVIPC=y
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+# CONFIG_RELAY is not set
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EMBEDDED=y
@@ -171,10 +176,6 @@ CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
 CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -186,7 +187,6 @@ CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
@@ -195,6 +195,7 @@ CONFIG_KMOD=y
 # Block layer
 #
 # CONFIG_LBD is not set
+# CONFIG_LSF is not set
 
 #
 # IO Schedulers
@@ -238,6 +239,7 @@ CONFIG_NET=y
 #
 # Networking options
 #
+# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -268,12 +270,15 @@ CONFIG_SYN_COOKIES=y
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETFILTER is not set
 
 #
@@ -290,6 +295,11 @@ CONFIG_IP_SCTP=m
 # CONFIG_SCTP_HMAC_NONE is not set
 # CONFIG_SCTP_HMAC_SHA1 is not set
 CONFIG_SCTP_HMAC_MD5=y
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
@@ -299,11 +309,6 @@ CONFIG_SCTP_HMAC_MD5=y
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
 CONFIG_NET_DIVERT=y
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
@@ -397,7 +402,7 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
 CONFIG_BLK_DEV_NBD=y
 # CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
+# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 
@@ -532,7 +537,7 @@ CONFIG_SERIO_SERPORT=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=1
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=1
 # CONFIG_SERIAL_8250_EXTENDED is not set
 
 #
@@ -596,10 +601,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 
 #
-# Multimedia Capabilities Port drivers
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -624,6 +625,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # CONFIG_USB_ARCH_HAS_HCD is not set
 # CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -640,12 +642,30 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_MMC is not set
 
 #
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
 # InfiniBand support
 #
 
 #
-# SN Devices
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
 #
+# CONFIG_RTC_CLASS is not set
 
 #
 # File systems
@@ -690,8 +710,6 @@ CONFIG_PROC_FS=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
-# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
diff --git a/arch/mips/configs/mpc30x_defconfig b/arch/mips/configs/mpc30x_defconfig
index e4620e7f0a5e..286a018375b2 100644
--- a/arch/mips/configs/mpc30x_defconfig
+++ b/arch/mips/configs/mpc30x_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16-rc1
-# Fri Jan 27 15:40:17 2006
+# Linux kernel version: 2.6.17-rc2
+# Mon Apr 24 14:51:09 2006
 #
 CONFIG_MIPS=y
 
@@ -72,6 +72,8 @@ CONFIG_VICTOR_MPC30X=y
 CONFIG_PCI_VR41XX=y
 CONFIG_VRC4173=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
@@ -90,7 +92,7 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
 # CONFIG_CPU_MIPS64_R2 is not set
 # CONFIG_CPU_R3000 is not set
 # CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_VR41XX is not set
+CONFIG_CPU_VR41XX=y
 # CONFIG_CPU_R4300 is not set
 # CONFIG_CPU_R4X00 is not set
 # CONFIG_CPU_TX49XX is not set
@@ -103,18 +105,21 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
 # CONFIG_CPU_RM7000 is not set
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_VR41XX=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
 
 #
 # Kernel type
 #
-# CONFIG_32BIT is not set
+CONFIG_32BIT=y
 # CONFIG_64BIT is not set
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 # CONFIG_MIPS_MT is not set
-CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
@@ -135,7 +140,6 @@ CONFIG_PREEMPT_NONE=y
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 
@@ -151,6 +155,7 @@ CONFIG_SYSVIPC=y
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_RELAY=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EMBEDDED=y
@@ -164,10 +169,6 @@ CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
 CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -179,7 +180,6 @@ CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
@@ -187,6 +187,9 @@ CONFIG_KMOD=y
 #
 # Block layer
 #
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
 
 #
 # IO Schedulers
@@ -206,7 +209,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 #
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
-CONFIG_PCI_LEGACY_PROC=y
 CONFIG_MMU=y
 
 #
@@ -225,6 +227,7 @@ CONFIG_PCMCIA_IOCTL=y
 # CONFIG_YENTA is not set
 # CONFIG_PD6729 is not set
 # CONFIG_I82092 is not set
+# CONFIG_PCMCIA_VRC4173 is not set
 
 #
 # PCI Hotplug Support
@@ -236,6 +239,7 @@ CONFIG_PCMCIA_IOCTL=y
 #
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
+CONFIG_TRAD_SIGNALS=y
 
 #
 # Networking
@@ -245,6 +249,7 @@ CONFIG_NET=y
 #
 # Networking options
 #
+# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -264,12 +269,15 @@ CONFIG_IP_FIB_HASH=y
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETFILTER is not set
 
 #
@@ -281,6 +289,11 @@ CONFIG_TCP_CONG_BIC=y
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
@@ -290,11 +303,6 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
@@ -316,6 +324,9 @@ CONFIG_IEEE80211=m
 CONFIG_IEEE80211_CRYPT_WEP=m
 CONFIG_IEEE80211_CRYPT_CCMP=m
 CONFIG_IEEE80211_CRYPT_TKIP=m
+CONFIG_IEEE80211_SOFTMAC=m
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+CONFIG_WIRELESS_EXT=y
 
 #
 # Device Drivers
@@ -360,7 +371,7 @@ CONFIG_CONNECTOR=m
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_UB is not set
 # CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
+# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CDROM_PKTCDVD is not set
 CONFIG_ATA_OVER_ETH=m
 
@@ -475,6 +486,7 @@ CONFIG_MII=m
 # Wireless LAN (non-hamradio)
 #
 CONFIG_NET_RADIO=y
+# CONFIG_NET_WIRELESS_RTNETLINK is not set
 
 #
 # Obsolete Wireless cards support (pre-802.11)
@@ -513,6 +525,7 @@ CONFIG_PCMCIA_HERMES=m
 #
 # CONFIG_PRISM54 is not set
 # CONFIG_HOSTAP is not set
+# CONFIG_BCM43XX is not set
 CONFIG_NET_WIRELESS=y
 
 #
@@ -604,6 +617,8 @@ CONFIG_HW_CONSOLE=y
 #
 # Non-8250 serial port support
 #
+# CONFIG_SERIAL_VR41XX is not set
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -634,6 +649,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_SYNCLINK_CS is not set
 # CONFIG_CARDMAN_4000 is not set
 # CONFIG_CARDMAN_4040 is not set
+# CONFIG_GPIO_VR41XX is not set
 # CONFIG_RAW_DRIVER is not set
 
 #
@@ -669,10 +685,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 
 #
-# Multimedia Capabilities Port drivers
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -681,6 +693,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # Digital Video Broadcasting Devices
 #
 # CONFIG_DVB is not set
+# CONFIG_USB_DABUSB is not set
 
 #
 # Graphics support
@@ -703,6 +716,7 @@ CONFIG_DUMMY_CONSOLE=y
 #
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=m
 # CONFIG_USB_DEBUG is not set
 
@@ -756,9 +770,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_ACECAD is not set
 # CONFIG_USB_KBTAB is not set
 # CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_TOUCHSCREEN is not set
 # CONFIG_USB_YEALINK is not set
 # CONFIG_USB_XPAD is not set
 # CONFIG_USB_ATI_REMOTE is not set
@@ -772,15 +784,6 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_MDC800 is not set
 
 #
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-
-#
-# Video4Linux support is needed for USB Multimedia device support
-#
-
-#
 # USB Network Adapters
 #
 # CONFIG_USB_CATC is not set
@@ -832,13 +835,31 @@ CONFIG_USB_PEGASUS=m
 # CONFIG_MMC is not set
 
 #
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
 # InfiniBand support
 #
 # CONFIG_INFINIBAND is not set
 
 #
-# SN Devices
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
 #
+# CONFIG_RTC_CLASS is not set
 
 #
 # File systems
@@ -883,7 +904,6 @@ CONFIG_SYSFS=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-CONFIG_RELAYFS_FS=m
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -946,6 +966,7 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_FS is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE="mem=32M console=ttyVR0,19200"
 
diff --git a/arch/mips/configs/ocelot_3_defconfig b/arch/mips/configs/ocelot_3_defconfig
index 925d8adef88d..1ce4310fd92a 100644
--- a/arch/mips/configs/ocelot_3_defconfig
+++ b/arch/mips/configs/ocelot_3_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16-rc1
-# Fri Jan 27 15:40:18 2006
+# Linux kernel version: 2.6.17-rc2
+# Mon Apr 24 14:51:10 2006
 #
 CONFIG_MIPS=y
 
@@ -64,6 +64,8 @@ CONFIG_MOMENCO_OCELOT_3=y
 # CONFIG_TOSHIBA_RBTX4927 is not set
 # CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
@@ -120,7 +122,6 @@ CONFIG_RM7000_CPU_SCACHE=y
 CONFIG_CPU_HAS_PREFETCH=y
 # CONFIG_MIPS_MT is not set
 # CONFIG_64BIT_PHYS_ADDR is not set
-# CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
@@ -144,7 +145,6 @@ CONFIG_PREEMPT_NONE=y
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 
@@ -161,6 +161,7 @@ CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
+CONFIG_RELAY=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EMBEDDED=y
@@ -174,10 +175,6 @@ CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
 CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -189,7 +186,6 @@ CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
@@ -198,6 +194,8 @@ CONFIG_KMOD=y
 # Block layer
 #
 # CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
 
 #
 # IO Schedulers
@@ -217,7 +215,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 #
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
-CONFIG_PCI_LEGACY_PROC=y
 CONFIG_MMU=y
 
 #
@@ -245,6 +242,7 @@ CONFIG_NET=y
 #
 # Networking options
 #
+# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -266,6 +264,7 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
@@ -278,9 +277,12 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_IP_VS is not set
 CONFIG_IPV6=m
 # CONFIG_IPV6_PRIVACY is not set
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
 # CONFIG_INET6_AH is not set
 # CONFIG_INET6_ESP is not set
 # CONFIG_INET6_IPCOMP is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
 # CONFIG_IPV6_TUNNEL is not set
 CONFIG_NETFILTER=y
@@ -299,10 +301,13 @@ CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
 CONFIG_NETFILTER_XT_MATCH_MAC=m
 CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
 CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
 CONFIG_NETFILTER_XT_MATCH_REALM=m
 CONFIG_NETFILTER_XT_MATCH_SCTP=m
@@ -332,6 +337,11 @@ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
@@ -341,11 +351,6 @@ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
@@ -367,6 +372,9 @@ CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
 CONFIG_IEEE80211_CRYPT_WEP=m
 CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_SOFTMAC=m
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+CONFIG_WIRELESS_EXT=y
 
 #
 # Device Drivers
@@ -411,7 +419,7 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
+# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CDROM_PKTCDVD is not set
 CONFIG_ATA_OVER_ETH=m
 
@@ -475,7 +483,6 @@ CONFIG_ISCSI_TCP=m
 # CONFIG_SCSI_INIA100 is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
 # CONFIG_SCSI_QLA_FC is not set
 # CONFIG_SCSI_LPFC is not set
@@ -690,6 +697,7 @@ CONFIG_HW_CONSOLE=y
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
 CONFIG_SERIAL_8250_NR_UARTS=4
 CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_8250_EXTENDED is not set
@@ -699,6 +707,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -756,10 +765,6 @@ CONFIG_RTC=y
 #
 
 #
-# Multimedia Capabilities Port drivers
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -777,6 +782,7 @@ CONFIG_FB=y
 # CONFIG_FB_CFB_COPYAREA is not set
 # CONFIG_FB_CFB_IMAGEBLIT is not set
 # CONFIG_FB_MACMODES is not set
+CONFIG_FB_FIRMWARE_EDID=y
 CONFIG_FB_MODE_HELPERS=y
 # CONFIG_FB_TILEBLITTING is not set
 # CONFIG_FB_CIRRUS is not set
@@ -788,7 +794,6 @@ CONFIG_FB_MODE_HELPERS=y
 # CONFIG_FB_NVIDIA is not set
 # CONFIG_FB_RIVA is not set
 # CONFIG_FB_MATROX is not set
-# CONFIG_FB_RADEON_OLD is not set
 # CONFIG_FB_RADEON is not set
 # CONFIG_FB_ATY128 is not set
 # CONFIG_FB_ATY is not set
@@ -832,6 +837,7 @@ CONFIG_LOGO_LINUX_CLUT224=y
 #
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
 
 #
@@ -849,13 +855,31 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_MMC is not set
 
 #
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
 # InfiniBand support
 #
 # CONFIG_INFINIBAND is not set
 
 #
-# SN Devices
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
 #
+# CONFIG_RTC_CLASS is not set
 
 #
 # File systems
@@ -914,7 +938,6 @@ CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-CONFIG_RELAYFS_FS=m
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -1025,6 +1048,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_FS is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE="ip=any root=nfs"
 
diff --git a/arch/mips/configs/ocelot_c_defconfig b/arch/mips/configs/ocelot_c_defconfig
index ee1cf9b9eb9a..8a6aa5012f89 100644
--- a/arch/mips/configs/ocelot_c_defconfig
+++ b/arch/mips/configs/ocelot_c_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16-rc1
-# Fri Jan 27 15:40:19 2006
+# Linux kernel version: 2.6.17-rc2
+# Mon Apr 24 14:51:10 2006
 #
 CONFIG_MIPS=y
 
@@ -64,6 +64,8 @@ CONFIG_MOMENCO_OCELOT_C=y
 # CONFIG_TOSHIBA_RBTX4927 is not set
 # CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
@@ -139,7 +141,6 @@ CONFIG_PREEMPT_NONE=y
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 
@@ -155,6 +156,7 @@ CONFIG_SYSVIPC=y
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_RELAY=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EMBEDDED=y
@@ -168,10 +170,6 @@ CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
 CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -185,6 +183,7 @@ CONFIG_BASE_SMALL=0
 #
 # Block layer
 #
+# CONFIG_BLK_DEV_IO_TRACE is not set
 
 #
 # IO Schedulers
@@ -204,7 +203,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 #
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
-CONFIG_PCI_LEGACY_PROC=y
 CONFIG_MMU=y
 
 #
@@ -222,6 +220,7 @@ CONFIG_MMU=y
 #
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
+# CONFIG_BUILD_ELF64 is not set
 CONFIG_MIPS32_COMPAT=y
 CONFIG_COMPAT=y
 CONFIG_MIPS32_O32=y
@@ -236,6 +235,7 @@ CONFIG_NET=y
 #
 # Networking options
 #
+# CONFIG_NETDEBUG is not set
 # CONFIG_PACKET is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
@@ -256,12 +256,15 @@ CONFIG_IP_PNP_DHCP=y
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=y
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETFILTER is not set
 
 #
@@ -273,6 +276,11 @@ CONFIG_TCP_CONG_BIC=y
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
@@ -282,11 +290,6 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
@@ -307,6 +310,9 @@ CONFIG_IEEE80211=y
 # CONFIG_IEEE80211_DEBUG is not set
 CONFIG_IEEE80211_CRYPT_WEP=y
 CONFIG_IEEE80211_CRYPT_CCMP=y
+CONFIG_IEEE80211_SOFTMAC=y
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+CONFIG_WIRELESS_EXT=y
 
 #
 # Device Drivers
@@ -351,7 +357,7 @@ CONFIG_PROC_EVENTS=y
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
+# CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CDROM_PKTCDVD=y
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
@@ -542,6 +548,7 @@ CONFIG_HW_CONSOLE=y
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
 CONFIG_SERIAL_8250_NR_UARTS=4
 CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_8250_EXTENDED is not set
@@ -551,6 +558,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -609,10 +617,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 
 #
-# Multimedia Capabilities Port drivers
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -643,6 +647,7 @@ CONFIG_DUMMY_CONSOLE=y
 #
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
 
 #
@@ -660,13 +665,31 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_MMC is not set
 
 #
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
 # InfiniBand support
 #
 # CONFIG_INFINIBAND is not set
 
 #
-# SN Devices
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
 #
+# CONFIG_RTC_CLASS is not set
 
 #
 # File systems
@@ -711,7 +734,6 @@ CONFIG_SYSFS=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-CONFIG_RELAYFS_FS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -778,6 +800,8 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_FS is not set
+# CONFIG_UNWIND_INFO is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 
diff --git a/arch/mips/configs/ocelot_defconfig b/arch/mips/configs/ocelot_defconfig
index d80ff278f2af..f9ee35eeb762 100644
--- a/arch/mips/configs/ocelot_defconfig
+++ b/arch/mips/configs/ocelot_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16-rc1
-# Fri Jan 27 15:40:20 2006
+# Linux kernel version: 2.6.17-rc2
+# Mon Apr 24 14:51:11 2006
 #
 CONFIG_MIPS=y
 
@@ -64,6 +64,8 @@ CONFIG_MOMENCO_OCELOT=y
 # CONFIG_TOSHIBA_RBTX4927 is not set
 # CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
@@ -121,7 +123,6 @@ CONFIG_RM7000_CPU_SCACHE=y
 CONFIG_CPU_HAS_PREFETCH=y
 # CONFIG_MIPS_MT is not set
 # CONFIG_64BIT_PHYS_ADDR is not set
-# CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
@@ -144,7 +145,6 @@ CONFIG_PREEMPT_NONE=y
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 
@@ -160,6 +160,7 @@ CONFIG_SYSVIPC=y
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_RELAY=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EMBEDDED=y
@@ -173,10 +174,6 @@ CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
 CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -191,6 +188,8 @@ CONFIG_BASE_SMALL=0
 # Block layer
 #
 # CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
 
 #
 # IO Schedulers
@@ -236,6 +235,7 @@ CONFIG_NET=y
 #
 # Networking options
 #
+# CONFIG_NETDEBUG is not set
 # CONFIG_PACKET is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
@@ -256,12 +256,15 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=y
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETFILTER is not set
 
 #
@@ -273,6 +276,11 @@ CONFIG_TCP_CONG_BIC=y
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
@@ -282,11 +290,6 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
@@ -307,6 +310,9 @@ CONFIG_IEEE80211=y
 # CONFIG_IEEE80211_DEBUG is not set
 CONFIG_IEEE80211_CRYPT_WEP=y
 CONFIG_IEEE80211_CRYPT_CCMP=y
+CONFIG_IEEE80211_SOFTMAC=y
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+CONFIG_WIRELESS_EXT=y
 
 #
 # Device Drivers
@@ -346,7 +352,7 @@ CONFIG_PROC_EVENTS=y
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
+# CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CDROM_PKTCDVD=y
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
@@ -563,10 +569,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 
 #
-# Multimedia Capabilities Port drivers
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -597,6 +599,7 @@ CONFIG_DUMMY_CONSOLE=y
 #
 # CONFIG_USB_ARCH_HAS_HCD is not set
 # CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -613,12 +616,30 @@ CONFIG_DUMMY_CONSOLE=y
 # CONFIG_MMC is not set
 
 #
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
 # InfiniBand support
 #
 
 #
-# SN Devices
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
 #
+# CONFIG_RTC_CLASS is not set
 
 #
 # File systems
@@ -663,7 +684,6 @@ CONFIG_SYSFS=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-CONFIG_RELAYFS_FS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -730,6 +750,8 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_FS is not set
+# CONFIG_UNWIND_INFO is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 
diff --git a/arch/mips/configs/ocelot_g_defconfig b/arch/mips/configs/ocelot_g_defconfig
index c0f508d180c4..b48bdee2411f 100644
--- a/arch/mips/configs/ocelot_g_defconfig
+++ b/arch/mips/configs/ocelot_g_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16-rc1
-# Fri Jan 27 15:40:21 2006
+# Linux kernel version: 2.6.17-rc2
+# Mon Apr 24 14:51:11 2006
 #
 CONFIG_MIPS=y
 
@@ -64,6 +64,8 @@ CONFIG_MOMENCO_OCELOT_G=y
 # CONFIG_TOSHIBA_RBTX4927 is not set
 # CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
@@ -142,7 +144,6 @@ CONFIG_PREEMPT_NONE=y
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 
@@ -158,6 +159,7 @@ CONFIG_SYSVIPC=y
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_RELAY=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EMBEDDED=y
@@ -171,10 +173,6 @@ CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
 CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -188,6 +186,7 @@ CONFIG_BASE_SMALL=0
 #
 # Block layer
 #
+# CONFIG_BLK_DEV_IO_TRACE is not set
 
 #
 # IO Schedulers
@@ -207,7 +206,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 #
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
-CONFIG_PCI_LEGACY_PROC=y
 CONFIG_MMU=y
 
 #
@@ -225,6 +223,7 @@ CONFIG_MMU=y
 #
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
+# CONFIG_BUILD_ELF64 is not set
 CONFIG_MIPS32_COMPAT=y
 CONFIG_COMPAT=y
 CONFIG_MIPS32_O32=y
@@ -239,6 +238,7 @@ CONFIG_NET=y
 #
 # Networking options
 #
+# CONFIG_NETDEBUG is not set
 # CONFIG_PACKET is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
@@ -259,12 +259,15 @@ CONFIG_IP_PNP_DHCP=y
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=y
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETFILTER is not set
 
 #
@@ -276,6 +279,11 @@ CONFIG_TCP_CONG_BIC=y
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
@@ -285,11 +293,6 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
@@ -310,6 +313,9 @@ CONFIG_IEEE80211=y
 # CONFIG_IEEE80211_DEBUG is not set
 CONFIG_IEEE80211_CRYPT_WEP=y
 CONFIG_IEEE80211_CRYPT_CCMP=y
+CONFIG_IEEE80211_SOFTMAC=y
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+CONFIG_WIRELESS_EXT=y
 
 #
 # Device Drivers
@@ -354,7 +360,7 @@ CONFIG_PROC_EVENTS=y
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
+# CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CDROM_PKTCDVD=y
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
@@ -545,6 +551,7 @@ CONFIG_HW_CONSOLE=y
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
 CONFIG_SERIAL_8250_NR_UARTS=4
 CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_8250_EXTENDED is not set
@@ -554,6 +561,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -612,10 +620,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 
 #
-# Multimedia Capabilities Port drivers
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -646,6 +650,7 @@ CONFIG_DUMMY_CONSOLE=y
 #
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
 
 #
@@ -663,13 +668,31 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_MMC is not set
 
 #
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
 # InfiniBand support
 #
 # CONFIG_INFINIBAND is not set
 
 #
-# SN Devices
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
 #
+# CONFIG_RTC_CLASS is not set
 
 #
 # File systems
@@ -714,7 +737,6 @@ CONFIG_SYSFS=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-CONFIG_RELAYFS_FS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -781,6 +803,8 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_FS is not set
+# CONFIG_UNWIND_INFO is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 
diff --git a/arch/mips/configs/pb1100_defconfig b/arch/mips/configs/pb1100_defconfig
index 194b3c772bb7..01aac40634b4 100644
--- a/arch/mips/configs/pb1100_defconfig
+++ b/arch/mips/configs/pb1100_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16-rc1
-# Fri Jan 27 15:40:22 2006
+# Linux kernel version: 2.6.17-rc2
+# Mon Apr 24 14:51:12 2006
 #
 CONFIG_MIPS=y
 
@@ -64,6 +64,8 @@ CONFIG_MIPS_PB1100=y
 # CONFIG_TOSHIBA_RBTX4927 is not set
 # CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
@@ -116,11 +118,11 @@ CONFIG_PAGE_SIZE_4KB=y
 CONFIG_CPU_HAS_PREFETCH=y
 # CONFIG_MIPS_MT is not set
 CONFIG_64BIT_PHYS_ADDR=y
-# CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
@@ -138,7 +140,6 @@ CONFIG_PREEMPT_NONE=y
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 
@@ -154,6 +155,7 @@ CONFIG_SYSVIPC=y
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_RELAY=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EMBEDDED=y
@@ -167,10 +169,6 @@ CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
 CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -183,7 +181,6 @@ CONFIG_OBSOLETE_INTERMODULE=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
@@ -192,6 +189,8 @@ CONFIG_KMOD=y
 # Block layer
 #
 # CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
 
 #
 # IO Schedulers
@@ -247,6 +246,7 @@ CONFIG_NET=y
 #
 # Networking options
 #
+# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -269,7 +269,8 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -280,6 +281,8 @@ CONFIG_TCP_CONG_BIC=y
 #
 # CONFIG_IP_VS is not set
 # CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
 
@@ -296,10 +299,13 @@ CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
 CONFIG_NETFILTER_XT_MATCH_MAC=m
 CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
 CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
 CONFIG_NETFILTER_XT_MATCH_REALM=m
 CONFIG_NETFILTER_XT_MATCH_SCTP=m
@@ -323,6 +329,11 @@ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
@@ -332,11 +343,6 @@ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
@@ -358,6 +364,9 @@ CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
 CONFIG_IEEE80211_CRYPT_WEP=m
 CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_SOFTMAC=m
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+CONFIG_WIRELESS_EXT=y
 
 #
 # Device Drivers
@@ -414,7 +423,6 @@ CONFIG_MTD_CFI_I2=y
 # CONFIG_MTD_CFI_I8 is not set
 # CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_CFI_AMDSTD_RETRY=0
 # CONFIG_MTD_CFI_STAA is not set
 CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_RAM is not set
@@ -436,7 +444,6 @@ CONFIG_MTD_ALCHEMY=y
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
 # CONFIG_MTD_BLOCK2MTD is not set
 
 #
@@ -473,7 +480,7 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
+# CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
@@ -716,10 +723,6 @@ CONFIG_SYNCLINK_CS=m
 #
 
 #
-# Multimedia Capabilities Port drivers
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -750,6 +753,7 @@ CONFIG_DUMMY_CONSOLE=y
 #
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
 # CONFIG_USB is not set
 
 #
@@ -767,12 +771,30 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_MMC is not set
 
 #
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
 # InfiniBand support
 #
 
 #
-# SN Devices
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
 #
+# CONFIG_RTC_CLASS is not set
 
 #
 # File systems
@@ -830,7 +852,6 @@ CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-CONFIG_RELAYFS_FS=m
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -939,6 +960,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_FS is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 
diff --git a/arch/mips/configs/pb1500_defconfig b/arch/mips/configs/pb1500_defconfig
index 8985725e6a98..398c3c265b9f 100644
--- a/arch/mips/configs/pb1500_defconfig
+++ b/arch/mips/configs/pb1500_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16-rc1
-# Fri Jan 27 15:40:24 2006
+# Linux kernel version: 2.6.17-rc2
+# Mon Apr 24 14:51:13 2006
 #
 CONFIG_MIPS=y
 
@@ -64,6 +64,8 @@ CONFIG_MIPS_PB1500=y
 # CONFIG_TOSHIBA_RBTX4927 is not set
 # CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
@@ -115,11 +117,11 @@ CONFIG_PAGE_SIZE_4KB=y
 CONFIG_CPU_HAS_PREFETCH=y
 # CONFIG_MIPS_MT is not set
 CONFIG_64BIT_PHYS_ADDR=y
-# CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
@@ -137,7 +139,6 @@ CONFIG_PREEMPT_NONE=y
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 
@@ -153,6 +154,7 @@ CONFIG_SYSVIPC=y
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_RELAY=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EMBEDDED=y
@@ -166,10 +168,6 @@ CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
 CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -182,7 +180,6 @@ CONFIG_OBSOLETE_INTERMODULE=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
@@ -191,6 +188,8 @@ CONFIG_KMOD=y
 # Block layer
 #
 # CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
 
 #
 # IO Schedulers
@@ -210,7 +209,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 #
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
-CONFIG_PCI_LEGACY_PROC=y
 CONFIG_MMU=y
 
 #
@@ -253,6 +251,7 @@ CONFIG_NET=y
 #
 # Networking options
 #
+# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -275,7 +274,8 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -286,6 +286,8 @@ CONFIG_TCP_CONG_BIC=y
 #
 # CONFIG_IP_VS is not set
 # CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
 
@@ -302,10 +304,13 @@ CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
 CONFIG_NETFILTER_XT_MATCH_MAC=m
 CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
 CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
 CONFIG_NETFILTER_XT_MATCH_REALM=m
 CONFIG_NETFILTER_XT_MATCH_SCTP=m
@@ -329,6 +334,11 @@ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
@@ -338,11 +348,6 @@ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
@@ -364,6 +369,9 @@ CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
 CONFIG_IEEE80211_CRYPT_WEP=m
 CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_SOFTMAC=m
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+CONFIG_WIRELESS_EXT=y
 
 #
 # Device Drivers
@@ -420,7 +428,6 @@ CONFIG_MTD_CFI_I2=y
 # CONFIG_MTD_CFI_I8 is not set
 # CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_CFI_AMDSTD_RETRY=0
 # CONFIG_MTD_CFI_STAA is not set
 CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_RAM is not set
@@ -443,7 +450,6 @@ CONFIG_MTD_ALCHEMY=y
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
 # CONFIG_MTD_BLOCK2MTD is not set
 
 #
@@ -485,7 +491,7 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
+# CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
@@ -750,6 +756,7 @@ CONFIG_SERIO_RAW=m
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
 # CONFIG_SERIAL_8250_CS is not set
 CONFIG_SERIAL_8250_NR_UARTS=4
 CONFIG_SERIAL_8250_RUNTIME_UARTS=4
@@ -761,6 +768,7 @@ CONFIG_SERIAL_8250_AU1X00=y
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -826,10 +834,6 @@ CONFIG_SYNCLINK_CS=m
 #
 
 #
-# Multimedia Capabilities Port drivers
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -854,6 +858,7 @@ CONFIG_SYNCLINK_CS=m
 #
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
 
 #
@@ -871,13 +876,31 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_MMC is not set
 
 #
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
 # InfiniBand support
 #
 # CONFIG_INFINIBAND is not set
 
 #
-# SN Devices
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
 #
+# CONFIG_RTC_CLASS is not set
 
 #
 # File systems
@@ -935,7 +958,6 @@ CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-CONFIG_RELAYFS_FS=m
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -1044,6 +1066,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_FS is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 
diff --git a/arch/mips/configs/pb1550_defconfig b/arch/mips/configs/pb1550_defconfig
index adbf997b540e..ea282a53bb66 100644
--- a/arch/mips/configs/pb1550_defconfig
+++ b/arch/mips/configs/pb1550_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16-rc1
-# Fri Jan 27 15:40:25 2006
+# Linux kernel version: 2.6.17-rc2
+# Mon Apr 24 14:51:13 2006
 #
 CONFIG_MIPS=y
 
@@ -64,6 +64,8 @@ CONFIG_MIPS_PB1550=y
 # CONFIG_TOSHIBA_RBTX4927 is not set
 # CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
@@ -115,11 +117,11 @@ CONFIG_PAGE_SIZE_4KB=y
 CONFIG_CPU_HAS_PREFETCH=y
 # CONFIG_MIPS_MT is not set
 CONFIG_64BIT_PHYS_ADDR=y
-# CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
@@ -137,7 +139,6 @@ CONFIG_PREEMPT_NONE=y
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 
@@ -153,6 +154,7 @@ CONFIG_SYSVIPC=y
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_RELAY=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EMBEDDED=y
@@ -166,10 +168,6 @@ CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
 CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -182,7 +180,6 @@ CONFIG_OBSOLETE_INTERMODULE=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
@@ -191,6 +188,8 @@ CONFIG_KMOD=y
 # Block layer
 #
 # CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
 
 #
 # IO Schedulers
@@ -210,7 +209,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 #
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
-CONFIG_PCI_LEGACY_PROC=y
 CONFIG_MMU=y
 
 #
@@ -253,6 +251,7 @@ CONFIG_NET=y
 #
 # Networking options
 #
+# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -275,7 +274,8 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -286,6 +286,8 @@ CONFIG_TCP_CONG_BIC=y
 #
 # CONFIG_IP_VS is not set
 # CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
 
@@ -302,10 +304,13 @@ CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
 CONFIG_NETFILTER_XT_MATCH_MAC=m
 CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
 CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
 CONFIG_NETFILTER_XT_MATCH_REALM=m
 CONFIG_NETFILTER_XT_MATCH_SCTP=m
@@ -329,6 +334,11 @@ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
@@ -338,11 +348,6 @@ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
@@ -364,6 +369,9 @@ CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
 CONFIG_IEEE80211_CRYPT_WEP=m
 CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_SOFTMAC=m
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+CONFIG_WIRELESS_EXT=y
 
 #
 # Device Drivers
@@ -420,7 +428,6 @@ CONFIG_MTD_CFI_I2=y
 # CONFIG_MTD_CFI_I8 is not set
 # CONFIG_MTD_CFI_INTELEXT is not set
 CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_CFI_AMDSTD_RETRY=0
 # CONFIG_MTD_CFI_STAA is not set
 CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_RAM is not set
@@ -443,7 +450,6 @@ CONFIG_MTD_ALCHEMY=y
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
 # CONFIG_MTD_BLOCK2MTD is not set
 
 #
@@ -485,7 +491,7 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
+# CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
@@ -742,6 +748,7 @@ CONFIG_SERIO_RAW=m
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
 # CONFIG_SERIAL_8250_CS is not set
 CONFIG_SERIAL_8250_NR_UARTS=4
 CONFIG_SERIAL_8250_RUNTIME_UARTS=4
@@ -753,6 +760,7 @@ CONFIG_SERIAL_8250_AU1X00=y
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -818,10 +826,6 @@ CONFIG_SYNCLINK_CS=m
 #
 
 #
-# Multimedia Capabilities Port drivers
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -846,6 +850,7 @@ CONFIG_SYNCLINK_CS=m
 #
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
 
 #
@@ -863,13 +868,31 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_MMC is not set
 
 #
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
 # InfiniBand support
 #
 # CONFIG_INFINIBAND is not set
 
 #
-# SN Devices
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
 #
+# CONFIG_RTC_CLASS is not set
 
 #
 # File systems
@@ -927,7 +950,6 @@ CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-CONFIG_RELAYFS_FS=m
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -1036,6 +1058,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_FS is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 
diff --git a/arch/mips/configs/pnx8550-jbs_defconfig b/arch/mips/configs/pnx8550-jbs_defconfig
index b5db700450ba..4c57e564db0b 100644
--- a/arch/mips/configs/pnx8550-jbs_defconfig
+++ b/arch/mips/configs/pnx8550-jbs_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16-rc1
-# Fri Jan 27 15:40:26 2006
+# Linux kernel version: 2.6.17-rc2
+# Mon Apr 24 14:51:14 2006
 #
 CONFIG_MIPS=y
 
@@ -64,6 +64,8 @@ CONFIG_PNX8550_JBS=y
 # CONFIG_TOSHIBA_RBTX4927 is not set
 # CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
@@ -114,11 +116,11 @@ CONFIG_PAGE_SIZE_4KB=y
 CONFIG_CPU_HAS_PREFETCH=y
 # CONFIG_MIPS_MT is not set
 # CONFIG_64BIT_PHYS_ADDR is not set
-# CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
@@ -136,7 +138,6 @@ CONFIG_PREEMPT_NONE=y
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 
@@ -153,6 +154,7 @@ CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
+# CONFIG_RELAY is not set
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EMBEDDED=y
@@ -167,10 +169,6 @@ CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
 CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -181,7 +179,6 @@ CONFIG_BASE_SMALL=0
 #
 CONFIG_MODULES=y
 # CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
@@ -190,6 +187,8 @@ CONFIG_KMOD=y
 # Block layer
 #
 # CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
 
 #
 # IO Schedulers
@@ -209,7 +208,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 #
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
-# CONFIG_PCI_LEGACY_PROC is not set
 # CONFIG_PCI_DEBUG is not set
 CONFIG_MMU=y
 
@@ -238,6 +236,7 @@ CONFIG_NET=y
 #
 # Networking options
 #
+# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -257,12 +256,15 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETFILTER is not set
 
 #
@@ -274,6 +276,11 @@ CONFIG_TCP_CONG_BIC=y
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
@@ -283,11 +290,6 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
@@ -469,7 +471,6 @@ CONFIG_ISCSI_TCP=m
 # CONFIG_SCSI_INIA100 is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
 # CONFIG_SCSI_QLA_FC is not set
 # CONFIG_SCSI_LPFC is not set
@@ -671,6 +672,7 @@ CONFIG_HW_CONSOLE=y
 # Non-8250 serial port support
 #
 # CONFIG_SERIAL_IP3106 is not set
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -723,6 +725,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_F71805F is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 
 #
@@ -730,10 +733,6 @@ CONFIG_HWMON=y
 #
 
 #
-# Multimedia Capabilities Port drivers
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -742,6 +741,7 @@ CONFIG_HWMON=y
 # Digital Video Broadcasting Devices
 #
 # CONFIG_DVB is not set
+# CONFIG_USB_DABUSB is not set
 
 #
 # Graphics support
@@ -764,6 +764,7 @@ CONFIG_DUMMY_CONSOLE=y
 #
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 # CONFIG_USB_DEBUG is not set
 
@@ -827,9 +828,7 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
 # CONFIG_USB_ACECAD is not set
 # CONFIG_USB_KBTAB is not set
 # CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_TOUCHSCREEN is not set
 # CONFIG_USB_YEALINK is not set
 # CONFIG_USB_XPAD is not set
 # CONFIG_USB_ATI_REMOTE is not set
@@ -844,15 +843,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
 # CONFIG_USB_MICROTEK is not set
 
 #
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-
-#
-# Video4Linux support is needed for USB Multimedia device support
-#
-
-#
 # USB Network Adapters
 #
 # CONFIG_USB_CATC is not set
@@ -902,13 +892,31 @@ CONFIG_USB_MON=y
 # CONFIG_MMC is not set
 
 #
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
 # InfiniBand support
 #
 # CONFIG_INFINIBAND is not set
 
 #
-# SN Devices
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
 #
+# CONFIG_RTC_CLASS is not set
 
 #
 # File systems
@@ -956,7 +964,6 @@ CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -1067,6 +1074,7 @@ CONFIG_LOG_BUF_SHIFT=14
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 CONFIG_DEBUG_SLAB=y
+# CONFIG_DEBUG_SLAB_LEAK is not set
 CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
diff --git a/arch/mips/configs/pnx8550-v2pci_defconfig b/arch/mips/configs/pnx8550-v2pci_defconfig
index 4187287f0763..3c8f35162fec 100644
--- a/arch/mips/configs/pnx8550-v2pci_defconfig
+++ b/arch/mips/configs/pnx8550-v2pci_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16-rc1
-# Fri Jan 27 15:40:28 2006
+# Linux kernel version: 2.6.17-rc2
+# Mon Apr 24 14:51:14 2006
 #
 CONFIG_MIPS=y
 
@@ -64,6 +64,8 @@ CONFIG_PNX8550_V2PCI=y
 # CONFIG_TOSHIBA_RBTX4927 is not set
 # CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
@@ -114,12 +116,11 @@ CONFIG_PAGE_SIZE_4KB=y
 CONFIG_CPU_HAS_PREFETCH=y
 # CONFIG_MIPS_MT is not set
 # CONFIG_64BIT_PHYS_ADDR is not set
-CONFIG_CPU_ADVANCED=y
 CONFIG_CPU_HAS_LLSC=y
-# CONFIG_CPU_HAS_WB is not set
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
@@ -137,7 +138,6 @@ CONFIG_PREEMPT_NONE=y
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 
@@ -154,6 +154,7 @@ CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
+# CONFIG_RELAY is not set
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EMBEDDED=y
@@ -167,10 +168,6 @@ CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
 CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -181,7 +178,6 @@ CONFIG_BASE_SMALL=0
 #
 CONFIG_MODULES=y
 # CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
@@ -190,6 +186,8 @@ CONFIG_KMOD=y
 # Block layer
 #
 # CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
 
 #
 # IO Schedulers
@@ -209,7 +207,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 #
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
-# CONFIG_PCI_LEGACY_PROC is not set
 CONFIG_MMU=y
 
 #
@@ -237,6 +234,7 @@ CONFIG_NET=y
 #
 # Networking options
 #
+# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -256,6 +254,7 @@ CONFIG_IP_PNP=y
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
@@ -268,9 +267,12 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_IP_VS is not set
 CONFIG_IPV6=m
 # CONFIG_IPV6_PRIVACY is not set
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
 # CONFIG_INET6_AH is not set
 # CONFIG_INET6_ESP is not set
 # CONFIG_INET6_IPCOMP is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
 # CONFIG_IPV6_TUNNEL is not set
 CONFIG_NETFILTER=y
@@ -287,10 +289,12 @@ CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
 CONFIG_NETFILTER_XT_MATCH_MAC=m
 CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
 CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
 CONFIG_NETFILTER_XT_MATCH_REALM=m
 CONFIG_NETFILTER_XT_MATCH_SCTP=m
@@ -320,6 +324,11 @@ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
@@ -329,11 +338,6 @@ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
@@ -521,7 +525,6 @@ CONFIG_AIC7XXX_DEBUG_MASK=0
 # CONFIG_SCSI_INIA100 is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
 # CONFIG_SCSI_QLA_FC is not set
 # CONFIG_SCSI_LPFC is not set
@@ -757,6 +760,7 @@ CONFIG_SERIAL_NONSTANDARD=y
 # Non-8250 serial port support
 #
 # CONFIG_SERIAL_IP3106 is not set
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -816,7 +820,6 @@ CONFIG_I2C_ALGOBIT=m
 # CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_PROSAVAGE is not set
 # CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
@@ -835,9 +838,7 @@ CONFIG_I2C_ALGOBIT=m
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
 # CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_RTC_X1205_I2C is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@@ -867,6 +868,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ASB100 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_FSCHER is not set
 # CONFIG_SENSORS_FSCPOS is not set
 # CONFIG_SENSORS_GL518SM is not set
@@ -901,10 +903,6 @@ CONFIG_HWMON=y
 #
 
 #
-# Multimedia Capabilities Port drivers
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -913,6 +911,7 @@ CONFIG_HWMON=y
 # Digital Video Broadcasting Devices
 #
 # CONFIG_DVB is not set
+# CONFIG_USB_DABUSB is not set
 
 #
 # Graphics support
@@ -922,6 +921,7 @@ CONFIG_FB=y
 # CONFIG_FB_CFB_COPYAREA is not set
 # CONFIG_FB_CFB_IMAGEBLIT is not set
 # CONFIG_FB_MACMODES is not set
+CONFIG_FB_FIRMWARE_EDID=y
 # CONFIG_FB_MODE_HELPERS is not set
 # CONFIG_FB_TILEBLITTING is not set
 # CONFIG_FB_CIRRUS is not set
@@ -933,7 +933,6 @@ CONFIG_FB=y
 # CONFIG_FB_NVIDIA is not set
 # CONFIG_FB_RIVA is not set
 # CONFIG_FB_MATROX is not set
-# CONFIG_FB_RADEON_OLD is not set
 # CONFIG_FB_RADEON is not set
 # CONFIG_FB_ATY128 is not set
 # CONFIG_FB_ATY is not set
@@ -970,6 +969,7 @@ CONFIG_DUMMY_CONSOLE=y
 #
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 # CONFIG_USB_DEBUG is not set
 
@@ -1030,9 +1030,7 @@ CONFIG_USB_HIDDEV=y
 # CONFIG_USB_ACECAD is not set
 # CONFIG_USB_KBTAB is not set
 # CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_TOUCHSCREEN is not set
 # CONFIG_USB_YEALINK is not set
 # CONFIG_USB_XPAD is not set
 # CONFIG_USB_ATI_REMOTE is not set
@@ -1047,15 +1045,6 @@ CONFIG_USB_HIDDEV=y
 # CONFIG_USB_MICROTEK is not set
 
 #
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-
-#
-# Video4Linux support is needed for USB Multimedia device support
-#
-
-#
 # USB Network Adapters
 #
 # CONFIG_USB_CATC is not set
@@ -1106,13 +1095,31 @@ CONFIG_USB_MON=y
 # CONFIG_MMC is not set
 
 #
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
 # InfiniBand support
 #
 # CONFIG_INFINIBAND is not set
 
 #
-# SN Devices
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
 #
+# CONFIG_RTC_CLASS is not set
 
 #
 # File systems
@@ -1171,7 +1178,6 @@ CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -1280,6 +1286,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_FS is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 
diff --git a/arch/mips/configs/qemu_defconfig b/arch/mips/configs/qemu_defconfig
index 31f5afabafa8..4bcc01dea041 100644
--- a/arch/mips/configs/qemu_defconfig
+++ b/arch/mips/configs/qemu_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16-rc2
-# Sun Feb 12 19:18:55 2006
+# Linux kernel version: 2.6.17-rc2
+# Mon Apr 24 14:51:15 2006
 #
 CONFIG_MIPS=y
 
@@ -64,6 +64,8 @@ CONFIG_QEMU=y
 # CONFIG_TOSHIBA_RBTX4927 is not set
 # CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_DMA_COHERENT=y
 CONFIG_GENERIC_ISA_DMA=y
@@ -115,16 +117,17 @@ CONFIG_PAGE_SIZE_4KB=y
 CONFIG_CPU_HAS_PREFETCH=y
 # CONFIG_MIPS_MT is not set
 # CONFIG_64BIT_PHYS_ADDR is not set
-# CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_SMP is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -147,6 +150,7 @@ CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_RELAY=y
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
@@ -159,10 +163,6 @@ CONFIG_ELF_CORE=y
 # CONFIG_FUTEX is not set
 # CONFIG_EPOLL is not set
 # CONFIG_SHMEM is not set
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
 CONFIG_SLAB=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=1
@@ -177,6 +177,8 @@ CONFIG_BASE_SMALL=1
 # Block layer
 #
 # CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
 
 #
 # IO Schedulers
@@ -196,6 +198,7 @@ CONFIG_DEFAULT_IOSCHED="noop"
 #
 CONFIG_ISA=y
 CONFIG_MMU=y
+CONFIG_I8253=y
 
 #
 # PCCARD (PCMCIA/CardBus) support
@@ -241,12 +244,15 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
@@ -308,7 +314,7 @@ CONFIG_PROC_EVENTS=y
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
+# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 
@@ -530,10 +536,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 
 #
-# Multimedia Capabilities Port drivers
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -552,6 +554,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # Console display driver support
 #
 CONFIG_VGA_CONSOLE=y
+# CONFIG_VGACON_SOFT_SCROLLBACK is not set
 # CONFIG_MDA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
 
@@ -565,6 +568,7 @@ CONFIG_DUMMY_CONSOLE=y
 #
 # CONFIG_USB_ARCH_HAS_HCD is not set
 # CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -581,15 +585,28 @@ CONFIG_DUMMY_CONSOLE=y
 # CONFIG_MMC is not set
 
 #
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
 # InfiniBand support
 #
 
 #
-# SN Devices
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
 #
 
 #
-# EDAC - error detection and reporting (RAS)
+# Real Time Clock
 #
 
 #
@@ -632,7 +649,6 @@ CONFIG_SYSFS=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-CONFIG_RELAYFS_FS=y
 
 #
 # Miscellaneous filesystems
@@ -680,6 +696,8 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_FS is not set
+# CONFIG_UNWIND_INFO is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 
diff --git a/arch/mips/configs/rbhma4500_defconfig b/arch/mips/configs/rbhma4500_defconfig
index b126f763cf51..3d441932e43a 100644
--- a/arch/mips/configs/rbhma4500_defconfig
+++ b/arch/mips/configs/rbhma4500_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16-rc1
-# Fri Jan 27 15:40:30 2006
+# Linux kernel version: 2.6.17-rc2
+# Mon Apr 24 14:51:16 2006
 #
 CONFIG_MIPS=y
 
@@ -71,6 +71,8 @@ CONFIG_TOSHIBA_RBTX4938_MPLEX_PIO58_61=y
 # CONFIG_TOSHIBA_RBTX4938_MPLEX_NAND is not set
 # CONFIG_TOSHIBA_RBTX4938_MPLEX_ATA is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
@@ -121,10 +123,9 @@ CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_CPU_HAS_PREFETCH=y
 # CONFIG_MIPS_MT is not set
-CONFIG_CPU_ADVANCED=y
 CONFIG_CPU_HAS_LLSC=y
-CONFIG_CPU_HAS_WB=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
@@ -145,7 +146,6 @@ CONFIG_PREEMPT_NONE=y
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 
@@ -162,6 +162,7 @@ CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
+CONFIG_RELAY=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EMBEDDED=y
@@ -175,10 +176,6 @@ CONFIG_BASE_FULL=y
 # CONFIG_FUTEX is not set
 # CONFIG_EPOLL is not set
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
 CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -190,7 +187,6 @@ CONFIG_OBSOLETE_INTERMODULE=y
 #
 CONFIG_MODULES=y
 # CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
@@ -199,6 +195,8 @@ CONFIG_KMOD=y
 # Block layer
 #
 # CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
 
 #
 # IO Schedulers
@@ -218,7 +216,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 #
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
-# CONFIG_PCI_LEGACY_PROC is not set
 CONFIG_ISA=y
 CONFIG_MMU=y
 
@@ -247,6 +244,7 @@ CONFIG_NET=y
 #
 # Networking options
 #
+# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -267,6 +265,7 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
@@ -279,9 +278,12 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_IP_VS is not set
 CONFIG_IPV6=m
 # CONFIG_IPV6_PRIVACY is not set
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
 # CONFIG_INET6_AH is not set
 # CONFIG_INET6_ESP is not set
 # CONFIG_INET6_IPCOMP is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
 # CONFIG_IPV6_TUNNEL is not set
 CONFIG_NETFILTER=y
@@ -300,10 +302,12 @@ CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
 CONFIG_NETFILTER_XT_MATCH_MAC=m
 CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
 CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
 CONFIG_NETFILTER_XT_MATCH_REALM=m
 CONFIG_NETFILTER_XT_MATCH_SCTP=m
@@ -333,6 +337,11 @@ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
@@ -342,11 +351,6 @@ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
@@ -369,6 +373,9 @@ CONFIG_IEEE80211=m
 CONFIG_IEEE80211_CRYPT_WEP=m
 CONFIG_IEEE80211_CRYPT_CCMP=m
 CONFIG_IEEE80211_CRYPT_TKIP=m
+CONFIG_IEEE80211_SOFTMAC=m
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+CONFIG_WIRELESS_EXT=y
 
 #
 # Device Drivers
@@ -425,7 +432,6 @@ CONFIG_MTD_CFI_I2=y
 # CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_CFI_AMDSTD_RETRY=0
 # CONFIG_MTD_CFI_STAA is not set
 CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_RAM is not set
@@ -447,7 +453,6 @@ CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
 # CONFIG_MTD_BLOCK2MTD is not set
 
 #
@@ -702,6 +707,7 @@ CONFIG_NET_PCI=y
 # Wireless LAN (non-hamradio)
 #
 CONFIG_NET_RADIO=y
+# CONFIG_NET_WIRELESS_RTNETLINK is not set
 
 #
 # Obsolete Wireless cards support (pre-802.11)
@@ -715,6 +721,8 @@ CONFIG_NET_RADIO=y
 #
 # CONFIG_IPW2100 is not set
 CONFIG_IPW2200=m
+# CONFIG_IPW2200_MONITOR is not set
+# CONFIG_IPW_QOS is not set
 # CONFIG_IPW2200_DEBUG is not set
 # CONFIG_HERMES is not set
 # CONFIG_ATMEL is not set
@@ -724,6 +732,7 @@ CONFIG_IPW2200=m
 #
 # CONFIG_PRISM54 is not set
 # CONFIG_HOSTAP is not set
+# CONFIG_BCM43XX is not set
 CONFIG_NET_WIRELESS=y
 
 #
@@ -821,7 +830,12 @@ CONFIG_HW_CONSOLE=y
 #
 # Non-8250 serial port support
 #
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_TXX9=y
 CONFIG_HAS_TXX9_SERIAL=y
+# CONFIG_SERIAL_TXX9_CONSOLE is not set
+# CONFIG_SERIAL_TXX9_STDSERIAL is not set
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -874,6 +888,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_F71805F is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 
 #
@@ -881,10 +896,6 @@ CONFIG_HWMON=y
 #
 
 #
-# Multimedia Capabilities Port drivers
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -893,6 +904,7 @@ CONFIG_HWMON=y
 # Digital Video Broadcasting Devices
 #
 # CONFIG_DVB is not set
+# CONFIG_USB_DABUSB is not set
 
 #
 # Graphics support
@@ -902,6 +914,7 @@ CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_MACMODES is not set
+CONFIG_FB_FIRMWARE_EDID=y
 # CONFIG_FB_MODE_HELPERS is not set
 # CONFIG_FB_TILEBLITTING is not set
 # CONFIG_FB_CIRRUS is not set
@@ -913,7 +926,6 @@ CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_NVIDIA is not set
 # CONFIG_FB_RIVA is not set
 # CONFIG_FB_MATROX is not set
-# CONFIG_FB_RADEON_OLD is not set
 # CONFIG_FB_RADEON is not set
 # CONFIG_FB_ATY128 is not set
 CONFIG_FB_ATY=y
@@ -934,6 +946,7 @@ CONFIG_FB_ATY_CT=y
 # Console display driver support
 #
 CONFIG_VGA_CONSOLE=y
+# CONFIG_VGACON_SOFT_SCROLLBACK is not set
 # CONFIG_MDA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
 # CONFIG_FRAMEBUFFER_CONSOLE is not set
@@ -954,6 +967,7 @@ CONFIG_DUMMY_CONSOLE=y
 #
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 # CONFIG_USB_DEBUG is not set
 
@@ -1003,9 +1017,7 @@ CONFIG_USB_HIDDEV=y
 # CONFIG_USB_ACECAD is not set
 # CONFIG_USB_KBTAB is not set
 # CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_TOUCHSCREEN is not set
 CONFIG_USB_YEALINK=m
 # CONFIG_USB_XPAD is not set
 # CONFIG_USB_ATI_REMOTE is not set
@@ -1019,15 +1031,6 @@ CONFIG_USB_YEALINK=m
 # CONFIG_USB_MDC800 is not set
 
 #
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-
-#
-# Video4Linux support is needed for USB Multimedia device support
-#
-
-#
 # USB Network Adapters
 #
 # CONFIG_USB_CATC is not set
@@ -1078,13 +1081,31 @@ CONFIG_USB_MON=y
 # CONFIG_MMC is not set
 
 #
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
 # InfiniBand support
 #
 # CONFIG_INFINIBAND is not set
 
 #
-# SN Devices
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
 #
+# CONFIG_RTC_CLASS is not set
 
 #
 # File systems
@@ -1148,7 +1169,6 @@ CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-CONFIG_RELAYFS_FS=m
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -1266,6 +1286,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_FS is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 
diff --git a/arch/mips/configs/rm200_defconfig b/arch/mips/configs/rm200_defconfig
index 463ed3dbf6ae..edfb9679a25a 100644
--- a/arch/mips/configs/rm200_defconfig
+++ b/arch/mips/configs/rm200_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16-rc1
-# Fri Jan 27 15:40:31 2006
+# Linux kernel version: 2.6.17-rc2
+# Mon Apr 24 14:51:16 2006
 #
 CONFIG_MIPS=y
 
@@ -64,6 +64,8 @@ CONFIG_SNI_RM200_PCI=y
 # CONFIG_TOSHIBA_RBTX4927 is not set
 # CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_ARC=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
@@ -122,7 +124,6 @@ CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_64KB is not set
 # CONFIG_MIPS_MT is not set
 # CONFIG_64BIT_PHYS_ADDR is not set
-# CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
@@ -145,7 +146,6 @@ CONFIG_PREEMPT_VOLUNTARY=y
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 
@@ -163,6 +163,7 @@ CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
+CONFIG_RELAY=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EMBEDDED=y
@@ -176,10 +177,6 @@ CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
 CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -191,7 +188,6 @@ CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
@@ -200,6 +196,8 @@ CONFIG_KMOD=y
 # Block layer
 #
 # CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
 
 #
 # IO Schedulers
@@ -220,10 +218,10 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_HW_HAS_EISA=y
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
-CONFIG_PCI_LEGACY_PROC=y
 CONFIG_ISA=y
 # CONFIG_EISA is not set
 CONFIG_MMU=y
+CONFIG_I8253=y
 
 #
 # PCCARD (PCMCIA/CardBus) support
@@ -250,6 +248,7 @@ CONFIG_NET=y
 #
 # Networking options
 #
+# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=m
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -272,6 +271,7 @@ CONFIG_IP_PIMSM_V2=y
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
 CONFIG_INET_TUNNEL=m
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
@@ -284,9 +284,12 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_IP_VS is not set
 CONFIG_IPV6=m
 CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
+CONFIG_INET6_XFRM_TUNNEL=m
 CONFIG_INET6_TUNNEL=m
 CONFIG_IPV6_TUNNEL=m
 CONFIG_NETFILTER=y
@@ -309,11 +312,14 @@ CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
 CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
 CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
 CONFIG_NETFILTER_XT_MATCH_HELPER=m
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
 CONFIG_NETFILTER_XT_MATCH_MAC=m
 CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
 CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
 CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
 CONFIG_NETFILTER_XT_MATCH_REALM=m
@@ -337,20 +343,19 @@ CONFIG_IP_NF_IRC=m
 CONFIG_IP_NF_TFTP=m
 CONFIG_IP_NF_AMANDA=m
 CONFIG_IP_NF_PPTP=m
+CONFIG_IP_NF_H323=m
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
 CONFIG_IP_NF_MATCH_TOS=m
 CONFIG_IP_NF_MATCH_RECENT=m
 CONFIG_IP_NF_MATCH_ECN=m
 CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
+CONFIG_IP_NF_MATCH_AH=m
 CONFIG_IP_NF_MATCH_TTL=m
 CONFIG_IP_NF_MATCH_OWNER=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
 CONFIG_IP_NF_MATCH_HASHLIMIT=m
-CONFIG_IP_NF_MATCH_POLICY=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
@@ -368,6 +373,7 @@ CONFIG_IP_NF_NAT_FTP=m
 CONFIG_IP_NF_NAT_TFTP=m
 CONFIG_IP_NF_NAT_AMANDA=m
 CONFIG_IP_NF_NAT_PPTP=m
+CONFIG_IP_NF_NAT_H323=m
 CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_TOS=m
 CONFIG_IP_NF_TARGET_ECN=m
@@ -388,12 +394,10 @@ CONFIG_IP6_NF_MATCH_RT=m
 CONFIG_IP6_NF_MATCH_OPTS=m
 CONFIG_IP6_NF_MATCH_FRAG=m
 CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_MULTIPORT=m
 CONFIG_IP6_NF_MATCH_OWNER=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AHESP=m
+CONFIG_IP6_NF_MATCH_AH=m
 CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_MATCH_POLICY=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_LOG=m
 CONFIG_IP6_NF_TARGET_REJECT=m
@@ -439,21 +443,22 @@ CONFIG_BRIDGE_EBT_ULOG=m
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 CONFIG_BRIDGE=m
 # CONFIG_VLAN_8021Q is not set
 CONFIG_DECNET=m
 # CONFIG_DECNET_ROUTER is not set
+CONFIG_LLC=m
 # CONFIG_LLC2 is not set
 # CONFIG_IPX is not set
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
@@ -533,6 +538,9 @@ CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
 CONFIG_IEEE80211_CRYPT_WEP=m
 CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_SOFTMAC=m
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+CONFIG_WIRELESS_EXT=y
 
 #
 # Device Drivers
@@ -620,6 +628,7 @@ CONFIG_BLK_DEV_UB=m
 CONFIG_BLK_DEV_RAM=m
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
@@ -700,12 +709,11 @@ CONFIG_SCSI_SYM53C8XX_2=y
 CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
 CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
 CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
-# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
+CONFIG_SCSI_SYM53C8XX_MMIO=y
 # CONFIG_SCSI_IPR is not set
 # CONFIG_SCSI_PAS16 is not set
 # CONFIG_SCSI_PSI240I is not set
 # CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
 # CONFIG_SCSI_QLA_FC is not set
 # CONFIG_SCSI_LPFC is not set
@@ -731,6 +739,7 @@ CONFIG_MD_RAID0=m
 CONFIG_MD_RAID1=m
 CONFIG_MD_RAID10=m
 CONFIG_MD_RAID5=m
+CONFIG_MD_RAID5_RESHAPE=y
 # CONFIG_MD_RAID6 is not set
 CONFIG_MD_MULTIPATH=m
 CONFIG_MD_FAULTY=m
@@ -965,6 +974,7 @@ CONFIG_HW_CONSOLE=y
 # Serial drivers
 #
 CONFIG_SERIAL_8250=m
+CONFIG_SERIAL_8250_PCI=m
 CONFIG_SERIAL_8250_NR_UARTS=4
 CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
@@ -977,6 +987,7 @@ CONFIG_SERIAL_8250_RSA=y
 # Non-8250 serial port support
 #
 CONFIG_SERIAL_CORE=m
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -1027,12 +1038,19 @@ CONFIG_RTC=m
 # Dallas's 1-wire bus
 #
 CONFIG_W1=m
-CONFIG_W1_MATROX=m
-CONFIG_W1_DS9490=m
-# CONFIG_W1_DS9490_BRIDGE is not set
-CONFIG_W1_THERM=m
-CONFIG_W1_SMEM=m
-# CONFIG_W1_DS2433 is not set
+
+#
+# 1-wire Bus Masters
+#
+# CONFIG_W1_MASTER_MATROX is not set
+# CONFIG_W1_MASTER_DS9490 is not set
+
+#
+# 1-wire Slaves
+#
+# CONFIG_W1_SLAVE_THERM is not set
+# CONFIG_W1_SLAVE_SMEM is not set
+# CONFIG_W1_SLAVE_DS2433 is not set
 
 #
 # Hardware Monitoring support
@@ -1045,10 +1063,6 @@ CONFIG_W1_SMEM=m
 #
 
 #
-# Multimedia Capabilities Port drivers
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -1057,6 +1071,7 @@ CONFIG_W1_SMEM=m
 # Digital Video Broadcasting Devices
 #
 # CONFIG_DVB is not set
+CONFIG_USB_DABUSB=m
 
 #
 # Graphics support
@@ -1067,6 +1082,7 @@ CONFIG_W1_SMEM=m
 # Console display driver support
 #
 CONFIG_VGA_CONSOLE=y
+# CONFIG_VGACON_SOFT_SCROLLBACK is not set
 # CONFIG_MDA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
 
@@ -1080,6 +1096,7 @@ CONFIG_DUMMY_CONSOLE=y
 #
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=m
 # CONFIG_USB_DEBUG is not set
 
@@ -1151,9 +1168,7 @@ CONFIG_USB_WACOM=m
 # CONFIG_USB_ACECAD is not set
 CONFIG_USB_KBTAB=m
 CONFIG_USB_POWERMATE=m
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-CONFIG_USB_EGALAX=m
+# CONFIG_USB_TOUCHSCREEN is not set
 CONFIG_USB_YEALINK=m
 CONFIG_USB_XPAD=m
 # CONFIG_USB_ATI_REMOTE is not set
@@ -1168,15 +1183,6 @@ CONFIG_USB_MDC800=m
 CONFIG_USB_MICROTEK=m
 
 #
-# USB Multimedia devices
-#
-CONFIG_USB_DABUSB=m
-
-#
-# Video4Linux support is needed for USB Multimedia device support
-#
-
-#
 # USB Network Adapters
 #
 CONFIG_USB_CATC=m
@@ -1213,6 +1219,7 @@ CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
 CONFIG_USB_SERIAL_CYPRESS_M8=m
 CONFIG_USB_SERIAL_EMPEG=m
 CONFIG_USB_SERIAL_FTDI_SIO=m
+# CONFIG_USB_SERIAL_FUNSOFT is not set
 CONFIG_USB_SERIAL_VISOR=m
 CONFIG_USB_SERIAL_IPAQ=m
 CONFIG_USB_SERIAL_IR=m
@@ -1237,6 +1244,7 @@ CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
 CONFIG_USB_SERIAL_KLSI=m
 CONFIG_USB_SERIAL_KOBIL_SCT=m
 CONFIG_USB_SERIAL_MCT_U232=m
+# CONFIG_USB_SERIAL_NAVMAN is not set
 CONFIG_USB_SERIAL_PL2303=m
 CONFIG_USB_SERIAL_HP4X=m
 CONFIG_USB_SERIAL_SAFE=m
@@ -1281,13 +1289,31 @@ CONFIG_USB_TEST=m
 # CONFIG_MMC is not set
 
 #
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
 # InfiniBand support
 #
 # CONFIG_INFINIBAND is not set
 
 #
-# SN Devices
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
 #
+# CONFIG_RTC_CLASS is not set
 
 #
 # File systems
@@ -1358,7 +1384,6 @@ CONFIG_SYSFS=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-CONFIG_RELAYFS_FS=m
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -1379,7 +1404,6 @@ CONFIG_HPFS_FS=m
 CONFIG_QNX4FS_FS=m
 CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
-# CONFIG_UFS_FS_WRITE is not set
 
 #
 # Network File Systems
@@ -1500,6 +1524,7 @@ CONFIG_NLS_UTF8=m
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_FS is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 
diff --git a/arch/mips/configs/sb1250-swarm_defconfig b/arch/mips/configs/sb1250-swarm_defconfig
index da68c3f72050..e388a3dae0a9 100644
--- a/arch/mips/configs/sb1250-swarm_defconfig
+++ b/arch/mips/configs/sb1250-swarm_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16-rc1
-# Fri Jan 27 15:40:32 2006
+# Linux kernel version: 2.6.17-rc2
+# Mon Apr 24 14:51:17 2006
 #
 CONFIG_MIPS=y
 
@@ -81,6 +81,8 @@ CONFIG_SIBYTE_CFE=y
 # CONFIG_SIBYTE_SB1250_PROF is not set
 # CONFIG_SIBYTE_TBPROF is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_DMA_COHERENT=y
 CONFIG_CPU_BIG_ENDIAN=y
@@ -158,7 +160,6 @@ CONFIG_PREEMPT_BKL=y
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 
@@ -175,6 +176,7 @@ CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_CPUSETS=y
+CONFIG_RELAY=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EMBEDDED=y
@@ -188,10 +190,6 @@ CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
 CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -203,7 +201,6 @@ CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
@@ -212,6 +209,7 @@ CONFIG_STOP_MACHINE=y
 #
 # Block layer
 #
+# CONFIG_BLK_DEV_IO_TRACE is not set
 
 #
 # IO Schedulers
@@ -231,7 +229,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 #
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
-CONFIG_PCI_LEGACY_PROC=y
 CONFIG_MMU=y
 
 #
@@ -249,6 +246,7 @@ CONFIG_MMU=y
 #
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
+# CONFIG_BUILD_ELF64 is not set
 CONFIG_MIPS32_COMPAT=y
 CONFIG_COMPAT=y
 CONFIG_MIPS32_O32=y
@@ -263,6 +261,7 @@ CONFIG_NET=y
 #
 # Networking options
 #
+# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -284,12 +283,15 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETFILTER is not set
 
 #
@@ -301,6 +303,11 @@ CONFIG_TCP_CONG_BIC=y
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
@@ -310,11 +317,6 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
@@ -335,6 +337,9 @@ CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
 CONFIG_IEEE80211_CRYPT_WEP=m
 CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_SOFTMAC=m
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+CONFIG_WIRELESS_EXT=y
 
 #
 # Device Drivers
@@ -589,6 +594,7 @@ CONFIG_SIBYTE_SB1250_DUART_CONSOLE=y
 #
 # Non-8250 serial port support
 #
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -647,10 +653,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 
 #
-# Multimedia Capabilities Port drivers
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -675,6 +677,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
 
 #
@@ -692,13 +695,31 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_MMC is not set
 
 #
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
 # InfiniBand support
 #
 # CONFIG_INFINIBAND is not set
 
 #
-# SN Devices
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
 #
+# CONFIG_RTC_CLASS is not set
 
 #
 # File systems
@@ -746,7 +767,6 @@ CONFIG_SYSFS=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-CONFIG_RELAYFS_FS=m
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -812,6 +832,7 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=15
+# CONFIG_DEBUG_FS is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 # CONFIG_SB1XXX_CORELIS is not set
diff --git a/arch/mips/configs/sead_defconfig b/arch/mips/configs/sead_defconfig
index 9a936d7b7c0c..6b8a6a416a25 100644
--- a/arch/mips/configs/sead_defconfig
+++ b/arch/mips/configs/sead_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16-rc1
-# Fri Jan 27 15:40:33 2006
+# Linux kernel version: 2.6.17-rc2
+# Mon Apr 24 14:51:17 2006
 #
 CONFIG_MIPS=y
 
@@ -64,6 +64,8 @@ CONFIG_MIPS_SEAD=y
 # CONFIG_TOSHIBA_RBTX4927 is not set
 # CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
@@ -118,11 +120,11 @@ CONFIG_PAGE_SIZE_4KB=y
 CONFIG_CPU_HAS_PREFETCH=y
 # CONFIG_MIPS_MT is not set
 # CONFIG_64BIT_PHYS_ADDR is not set
-# CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
@@ -140,7 +142,6 @@ CONFIG_PREEMPT_NONE=y
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 
@@ -154,6 +155,7 @@ CONFIG_SYSVIPC=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_IKCONFIG is not set
+CONFIG_RELAY=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EMBEDDED=y
@@ -167,10 +169,6 @@ CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
 CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -185,6 +183,8 @@ CONFIG_BASE_SMALL=0
 # Block layer
 #
 # CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
 
 #
 # IO Schedulers
@@ -296,12 +296,6 @@ CONFIG_RAID_ATTRS=y
 #
 
 #
-# Network device support
-#
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
 # ISDN subsystem
 #
 
@@ -397,10 +391,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 
 #
-# Multimedia Capabilities Port drivers
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -424,6 +414,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # CONFIG_USB_ARCH_HAS_HCD is not set
 # CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -440,12 +431,30 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_MMC is not set
 
 #
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
 # InfiniBand support
 #
 
 #
-# SN Devices
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
 #
+# CONFIG_RTC_CLASS is not set
 
 #
 # File systems
@@ -489,7 +498,6 @@ CONFIG_SYSFS=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-CONFIG_RELAYFS_FS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -543,6 +551,8 @@ CONFIG_PARTITION_ADVANCED=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_FS is not set
+# CONFIG_UNWIND_INFO is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 
diff --git a/arch/mips/configs/tb0226_defconfig b/arch/mips/configs/tb0226_defconfig
index c2dee0d1c72c..dba0bdcdcf29 100644
--- a/arch/mips/configs/tb0226_defconfig
+++ b/arch/mips/configs/tb0226_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16-rc1
-# Fri Jan 27 15:40:34 2006
+# Linux kernel version: 2.6.17-rc2
+# Tue Apr 25 00:08:41 2006
 #
 CONFIG_MIPS=y
 
@@ -68,12 +68,14 @@ CONFIG_MACH_VR41XX=y
 # CONFIG_NEC_CMBVR4133 is not set
 CONFIG_TANBAC_TB022X=y
 CONFIG_TANBAC_TB0226=y
-CONFIG_TANBAC_TB0287=y
+# CONFIG_TANBAC_TB0287 is not set
 # CONFIG_VICTOR_MPC30X is not set
 # CONFIG_ZAO_CAPCELLA is not set
 CONFIG_PCI_VR41XX=y
 # CONFIG_VRC4173 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
@@ -92,7 +94,7 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
 # CONFIG_CPU_MIPS64_R2 is not set
 # CONFIG_CPU_R3000 is not set
 # CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_VR41XX is not set
+CONFIG_CPU_VR41XX=y
 # CONFIG_CPU_R4300 is not set
 # CONFIG_CPU_R4X00 is not set
 # CONFIG_CPU_TX49XX is not set
@@ -105,18 +107,21 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
 # CONFIG_CPU_RM7000 is not set
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_VR41XX=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
 
 #
 # Kernel type
 #
-# CONFIG_32BIT is not set
+CONFIG_32BIT=y
 # CONFIG_64BIT is not set
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 # CONFIG_MIPS_MT is not set
-CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
@@ -137,7 +142,6 @@ CONFIG_PREEMPT_NONE=y
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 
@@ -153,6 +157,7 @@ CONFIG_SYSVIPC=y
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+# CONFIG_RELAY is not set
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EMBEDDED=y
@@ -166,10 +171,6 @@ CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
 CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -181,7 +182,6 @@ CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
@@ -189,6 +189,9 @@ CONFIG_KMOD=y
 #
 # Block layer
 #
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
 
 #
 # IO Schedulers
@@ -208,7 +211,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 #
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
-# CONFIG_PCI_LEGACY_PROC is not set
 CONFIG_MMU=y
 
 #
@@ -226,6 +228,7 @@ CONFIG_MMU=y
 #
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
+CONFIG_TRAD_SIGNALS=y
 
 #
 # Networking
@@ -235,11 +238,10 @@ CONFIG_NET=y
 #
 # Networking options
 #
+# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -263,12 +265,15 @@ CONFIG_SYN_COOKIES=y
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETFILTER is not set
 
 #
@@ -280,6 +285,11 @@ CONFIG_TCP_CONG_BIC=y
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
@@ -289,11 +299,6 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
@@ -310,10 +315,7 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
+# CONFIG_IEEE80211 is not set
 
 #
 # Device Drivers
@@ -358,11 +360,12 @@ CONFIG_BLK_DEV_LOOP=m
 CONFIG_BLK_DEV_NBD=m
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=m
+CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CDROM_PKTCDVD is not set
-CONFIG_ATA_OVER_ETH=m
+# CONFIG_ATA_OVER_ETH is not set
 
 #
 # ATA/ATAPI/MFM/RLL support
@@ -397,14 +400,14 @@ CONFIG_SCSI_MULTI_LUN=y
 # SCSI Transport Attributes
 #
 # CONFIG_SCSI_SPI_ATTRS is not set
-CONFIG_SCSI_FC_ATTRS=y
-CONFIG_SCSI_ISCSI_ATTRS=m
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
 # CONFIG_SCSI_SAS_ATTRS is not set
 
 #
 # SCSI low-level drivers
 #
-CONFIG_ISCSI_TCP=m
+# CONFIG_ISCSI_TCP is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -424,7 +427,6 @@ CONFIG_ISCSI_TCP=m
 # CONFIG_SCSI_INIA100 is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
 # CONFIG_SCSI_QLA_FC is not set
 # CONFIG_SCSI_LPFC is not set
@@ -507,8 +509,8 @@ CONFIG_NET_PCI=y
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
 # CONFIG_DGRS is not set
-CONFIG_EEPRO100=y
-# CONFIG_E100 is not set
+# CONFIG_EEPRO100 is not set
+CONFIG_E100=y
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
 # CONFIG_NE2K_PCI is not set
@@ -625,6 +627,11 @@ CONFIG_HW_CONSOLE=y
 #
 # Non-8250 serial port support
 #
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_VR41XX=y
+CONFIG_SERIAL_VR41XX_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -685,10 +692,6 @@ CONFIG_GPIO_VR41XX=y
 #
 
 #
-# Multimedia Capabilities Port drivers
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -697,6 +700,7 @@ CONFIG_GPIO_VR41XX=y
 # Digital Video Broadcasting Devices
 #
 # CONFIG_DVB is not set
+# CONFIG_USB_DABUSB is not set
 
 #
 # Graphics support
@@ -719,6 +723,7 @@ CONFIG_DUMMY_CONSOLE=y
 #
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 # CONFIG_USB_DEBUG is not set
 
@@ -756,7 +761,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 #
 # may also be needed; see USB_STORAGE Help for more information
 #
-CONFIG_USB_STORAGE=m
+CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
@@ -783,9 +788,7 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_ACECAD is not set
 # CONFIG_USB_KBTAB is not set
 # CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_TOUCHSCREEN is not set
 # CONFIG_USB_YEALINK is not set
 # CONFIG_USB_XPAD is not set
 # CONFIG_USB_ATI_REMOTE is not set
@@ -800,15 +803,6 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_MICROTEK is not set
 
 #
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-
-#
-# Video4Linux support is needed for USB Multimedia device support
-#
-
-#
 # USB Network Adapters
 #
 # CONFIG_USB_CATC is not set
@@ -816,7 +810,7 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
 # CONFIG_USB_USBNET is not set
-CONFIG_USB_MON=y
+# CONFIG_USB_MON is not set
 
 #
 # USB port drivers
@@ -860,13 +854,48 @@ CONFIG_USB_MON=y
 # CONFIG_MMC is not set
 
 #
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
 # InfiniBand support
 #
 # CONFIG_INFINIBAND is not set
 
 #
-# SN Devices
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+
+#
+# RTC drivers
 #
+# CONFIG_RTC_DRV_M48T86 is not set
+CONFIG_RTC_DRV_VR41XX=y
+# CONFIG_RTC_DRV_TEST is not set
 
 #
 # File systems
@@ -911,7 +940,6 @@ CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-CONFIG_RELAYFS_FS=m
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -952,9 +980,7 @@ CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-CONFIG_SMB_NLS_DEFAULT=y
-CONFIG_SMB_NLS_REMOTE="cp932"
+# CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
@@ -970,46 +996,7 @@ CONFIG_MSDOS_PARTITION=y
 #
 # Native Language Support
 #
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-CONFIG_NLS_CODEPAGE_932=m
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
+# CONFIG_NLS is not set
 
 #
 # Profiling support
@@ -1023,44 +1010,20 @@ CONFIG_NLS_ISO8859_1=m
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_FS is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE="mem=32M console=ttyVR0,115200"
 
 #
 # Security options
 #
-CONFIG_KEYS=y
-CONFIG_KEYS_DEBUG_PROC_KEYS=y
+# CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 
 #
 # Cryptographic options
 #
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO is not set
 
 #
 # Hardware crypto devices
@@ -1069,9 +1032,8 @@ CONFIG_CRYPTO_CRC32C=m
 #
 # Library routines
 #
-CONFIG_CRC_CCITT=m
-CONFIG_CRC16=m
-CONFIG_CRC32=m
-CONFIG_LIBCRC32C=m
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC32 is not set
+# CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/mips/configs/tb0229_defconfig b/arch/mips/configs/tb0229_defconfig
index be99261d7997..5a924c1a5803 100644
--- a/arch/mips/configs/tb0229_defconfig
+++ b/arch/mips/configs/tb0229_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16-rc1
-# Fri Jan 27 15:40:35 2006
+# Linux kernel version: 2.6.17-rc2
+# Tue Apr 25 00:08:59 2006
 #
 CONFIG_MIPS=y
 
@@ -68,12 +68,14 @@ CONFIG_MACH_VR41XX=y
 # CONFIG_NEC_CMBVR4133 is not set
 CONFIG_TANBAC_TB022X=y
 # CONFIG_TANBAC_TB0226 is not set
-CONFIG_TANBAC_TB0287=y
+# CONFIG_TANBAC_TB0287 is not set
 # CONFIG_VICTOR_MPC30X is not set
 # CONFIG_ZAO_CAPCELLA is not set
 CONFIG_PCI_VR41XX=y
 # CONFIG_VRC4173 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
@@ -92,7 +94,7 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
 # CONFIG_CPU_MIPS64_R2 is not set
 # CONFIG_CPU_R3000 is not set
 # CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_VR41XX is not set
+CONFIG_CPU_VR41XX=y
 # CONFIG_CPU_R4300 is not set
 # CONFIG_CPU_R4X00 is not set
 # CONFIG_CPU_TX49XX is not set
@@ -105,18 +107,21 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
 # CONFIG_CPU_RM7000 is not set
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_VR41XX=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
 
 #
 # Kernel type
 #
-# CONFIG_32BIT is not set
+CONFIG_32BIT=y
 # CONFIG_64BIT is not set
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 # CONFIG_MIPS_MT is not set
-CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
@@ -137,7 +142,6 @@ CONFIG_PREEMPT_NONE=y
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 
@@ -153,6 +157,7 @@ CONFIG_SYSVIPC=y
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+# CONFIG_RELAY is not set
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EMBEDDED=y
@@ -166,10 +171,6 @@ CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
 CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -181,7 +182,6 @@ CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
@@ -189,6 +189,9 @@ CONFIG_KMOD=y
 #
 # Block layer
 #
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
 
 #
 # IO Schedulers
@@ -208,7 +211,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 #
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
-# CONFIG_PCI_LEGACY_PROC is not set
 CONFIG_MMU=y
 
 #
@@ -226,6 +228,7 @@ CONFIG_MMU=y
 #
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
+CONFIG_TRAD_SIGNALS=y
 
 #
 # Networking
@@ -235,11 +238,10 @@ CONFIG_NET=y
 #
 # Networking options
 #
+# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -264,12 +266,15 @@ CONFIG_SYN_COOKIES=y
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
 CONFIG_INET_TUNNEL=m
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETFILTER is not set
 
 #
@@ -281,6 +286,11 @@ CONFIG_TCP_CONG_BIC=y
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
@@ -290,11 +300,6 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
@@ -311,10 +316,7 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
+# CONFIG_IEEE80211 is not set
 
 #
 # Device Drivers
@@ -325,12 +327,12 @@ CONFIG_IEEE80211_CRYPT_CCMP=m
 #
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+# CONFIG_FW_LOADER is not set
 
 #
 # Connector - unified userspace <-> kernelspace linker
 #
-CONFIG_CONNECTOR=m
+# CONFIG_CONNECTOR is not set
 
 #
 # Memory Technology Devices (MTD)
@@ -363,10 +365,8 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-CONFIG_ATA_OVER_ETH=m
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
 
 #
 # ATA/ATAPI/MFM/RLL support
@@ -443,30 +443,7 @@ CONFIG_MII=y
 #
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-CONFIG_EEPRO100=y
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-CONFIG_8139TOO=y
-CONFIG_8139TOO_PIO=y
-# CONFIG_8139TOO_TUNE_TWISTER is not set
-# CONFIG_8139TOO_8129 is not set
-# CONFIG_8139_OLD_RX_RESET is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_LAN_SAA9730 is not set
+# CONFIG_NET_PCI is not set
 
 #
 # Ethernet (1000 Mbit)
@@ -483,7 +460,6 @@ CONFIG_R8169=y
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
 # CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 
@@ -510,19 +486,8 @@ CONFIG_R8169=y
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
-CONFIG_PPP=m
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE=m
-CONFIG_PPPOE=m
-CONFIG_SLIP=m
-CONFIG_SLIP_COMPRESSED=y
-CONFIG_SLIP_SMART=y
-CONFIG_SLIP_MODE_SLIP6=y
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
@@ -583,6 +548,11 @@ CONFIG_HW_CONSOLE=y
 #
 # Non-8250 serial port support
 #
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_VR41XX=y
+CONFIG_SERIAL_VR41XX_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -607,6 +577,7 @@ CONFIG_TANBAC_TB0219=y
 # Ftape, the floppy tape device driver
 #
 # CONFIG_DRM is not set
+CONFIG_GPIO_VR41XX=y
 # CONFIG_RAW_DRIVER is not set
 
 #
@@ -642,10 +613,6 @@ CONFIG_TANBAC_TB0219=y
 #
 
 #
-# Multimedia Capabilities Port drivers
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -654,6 +621,7 @@ CONFIG_TANBAC_TB0219=y
 # Digital Video Broadcasting Devices
 #
 # CONFIG_DVB is not set
+# CONFIG_USB_DABUSB is not set
 
 #
 # Graphics support
@@ -676,6 +644,7 @@ CONFIG_DUMMY_CONSOLE=y
 #
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=m
 # CONFIG_USB_DEBUG is not set
 
@@ -731,9 +700,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_ACECAD is not set
 # CONFIG_USB_KBTAB is not set
 # CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_TOUCHSCREEN is not set
 # CONFIG_USB_YEALINK is not set
 # CONFIG_USB_XPAD is not set
 # CONFIG_USB_ATI_REMOTE is not set
@@ -747,15 +714,6 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_MDC800 is not set
 
 #
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-
-#
-# Video4Linux support is needed for USB Multimedia device support
-#
-
-#
 # USB Network Adapters
 #
 # CONFIG_USB_CATC is not set
@@ -807,13 +765,48 @@ CONFIG_USB_MON=y
 # CONFIG_MMC is not set
 
 #
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
 # InfiniBand support
 #
 # CONFIG_INFINIBAND is not set
 
 #
-# SN Devices
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+
+#
+# RTC drivers
 #
+# CONFIG_RTC_DRV_M48T86 is not set
+CONFIG_RTC_DRV_VR41XX=y
+# CONFIG_RTC_DRV_TEST is not set
 
 #
 # File systems
@@ -821,32 +814,16 @@ CONFIG_USB_MON=y
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=m
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
+# CONFIG_EXT3_FS is not set
 # CONFIG_REISERFS_FS is not set
-CONFIG_JFS_FS=m
-# CONFIG_JFS_POSIX_ACL is not set
-# CONFIG_JFS_SECURITY is not set
-# CONFIG_JFS_DEBUG is not set
-# CONFIG_JFS_STATISTICS is not set
+# CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_XFS_FS=y
-CONFIG_XFS_EXPORT=y
-CONFIG_XFS_QUOTA=y
-# CONFIG_XFS_SECURITY is not set
-CONFIG_XFS_POSIX_ACL=y
-# CONFIG_XFS_RT is not set
+# CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 CONFIG_ROMFS_FS=m
 CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
-CONFIG_QUOTACTL=y
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=y
@@ -855,20 +832,14 @@ CONFIG_FUSE_FS=m
 #
 # CD-ROM/DVD Filesystems
 #
-CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=y
+# CONFIG_ISO9660_FS is not set
 # CONFIG_UDF_FS is not set
 
 #
 # DOS/FAT/NT Filesystems
 #
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
 # CONFIG_NTFS_FS is not set
 
 #
@@ -880,7 +851,6 @@ CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-CONFIG_RELAYFS_FS=m
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -921,9 +891,7 @@ CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-CONFIG_SMB_NLS_DEFAULT=y
-CONFIG_SMB_NLS_REMOTE="cp932"
+# CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
@@ -939,46 +907,7 @@ CONFIG_MSDOS_PARTITION=y
 #
 # Native Language Support
 #
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-CONFIG_NLS_CODEPAGE_932=m
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
+# CONFIG_NLS is not set
 
 #
 # Profiling support
@@ -992,44 +921,20 @@ CONFIG_NLS_ISO8859_1=m
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_FS is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE="mem=64M console=ttyVR0,115200 ip=any root=/dev/nfs"
 
 #
 # Security options
 #
-CONFIG_KEYS=y
-CONFIG_KEYS_DEBUG_PROC_KEYS=y
+# CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 
 #
 # Cryptographic options
 #
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO is not set
 
 #
 # Hardware crypto devices
@@ -1038,9 +943,8 @@ CONFIG_CRYPTO_CRC32C=m
 #
 # Library routines
 #
-CONFIG_CRC_CCITT=m
-CONFIG_CRC16=m
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
 CONFIG_CRC32=y
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=m
diff --git a/arch/mips/configs/tb0287_defconfig b/arch/mips/configs/tb0287_defconfig
new file mode 100644
index 000000000000..9f215ea350dc
--- /dev/null
+++ b/arch/mips/configs/tb0287_defconfig
@@ -0,0 +1,1132 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.17-rc2
+# Tue Apr 25 00:09:17 2006
+#
+CONFIG_MIPS=y
+
+#
+# Machine selection
+#
+# CONFIG_MIPS_MTX1 is not set
+# CONFIG_MIPS_BOSPORUS is not set
+# CONFIG_MIPS_PB1000 is not set
+# CONFIG_MIPS_PB1100 is not set
+# CONFIG_MIPS_PB1500 is not set
+# CONFIG_MIPS_PB1550 is not set
+# CONFIG_MIPS_PB1200 is not set
+# CONFIG_MIPS_DB1000 is not set
+# CONFIG_MIPS_DB1100 is not set
+# CONFIG_MIPS_DB1500 is not set
+# CONFIG_MIPS_DB1550 is not set
+# CONFIG_MIPS_DB1200 is not set
+# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_MIPS_COBALT is not set
+# CONFIG_MACH_DECSTATION is not set
+# CONFIG_MIPS_EV64120 is not set
+# CONFIG_MIPS_EV96100 is not set
+# CONFIG_MIPS_IVR is not set
+# CONFIG_MIPS_ITE8172 is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+# CONFIG_MIPS_ATLAS is not set
+# CONFIG_MIPS_MALTA is not set
+# CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MOMENCO_JAGUAR_ATX is not set
+# CONFIG_MOMENCO_OCELOT is not set
+# CONFIG_MOMENCO_OCELOT_3 is not set
+# CONFIG_MOMENCO_OCELOT_C is not set
+# CONFIG_MOMENCO_OCELOT_G is not set
+# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_PNX8550_V2PCI is not set
+# CONFIG_PNX8550_JBS is not set
+# CONFIG_DDB5074 is not set
+# CONFIG_DDB5476 is not set
+# CONFIG_DDB5477 is not set
+CONFIG_MACH_VR41XX=y
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_QEMU is not set
+# CONFIG_SGI_IP22 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SNI_RM200_PCI is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_CASIO_E55 is not set
+# CONFIG_IBM_WORKPAD is not set
+# CONFIG_NEC_CMBVR4133 is not set
+CONFIG_TANBAC_TB022X=y
+# CONFIG_TANBAC_TB0226 is not set
+CONFIG_TANBAC_TB0287=y
+# CONFIG_VICTOR_MPC30X is not set
+# CONFIG_ZAO_CAPCELLA is not set
+CONFIG_PCI_VR41XX=y
+# CONFIG_VRC4173 is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_DMA_NEED_PCI_MAP_STATE=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_IRQ_CPU=y
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+
+#
+# CPU selection
+#
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
+# CONFIG_CPU_R3000 is not set
+# CONFIG_CPU_TX39XX is not set
+CONFIG_CPU_VR41XX=y
+# CONFIG_CPU_R4300 is not set
+# CONFIG_CPU_R4X00 is not set
+# CONFIG_CPU_TX49XX is not set
+# CONFIG_CPU_R5000 is not set
+# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R6000 is not set
+# CONFIG_CPU_NEVADA is not set
+# CONFIG_CPU_R8000 is not set
+# CONFIG_CPU_R10000 is not set
+# CONFIG_CPU_RM7000 is not set
+# CONFIG_CPU_RM9000 is not set
+# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_VR41XX=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_MIPS_MT is not set
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# Bus options (PCI, PCMCIA, EISA, ISA, TC)
+#
+CONFIG_HW_HAS_PCI=y
+CONFIG_PCI=y
+CONFIG_MMU=y
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# PCI Hotplug Support
+#
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_TRAD_SIGNALS=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+# CONFIG_NET_IPGRE_BROADCAST is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+CONFIG_TCP_CONG_ADVANCED=y
+
+#
+# TCP congestion control
+#
+CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_CUBIC=m
+CONFIG_TCP_CONG_WESTWOOD=m
+CONFIG_TCP_CONG_HTCP=m
+# CONFIG_TCP_CONG_HSTCP is not set
+# CONFIG_TCP_CONG_HYBLA is not set
+# CONFIG_TCP_CONG_VEGAS is not set
+# CONFIG_TCP_CONG_SCALABLE is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_IDEPCI=y
+# CONFIG_IDEPCI_SHARE_IRQ is not set
+# CONFIG_BLK_DEV_OFFBOARD is not set
+# CONFIG_BLK_DEV_GENERIC is not set
+# CONFIG_BLK_DEV_OPTI621 is not set
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
+# CONFIG_IDEDMA_PCI_AUTO is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+CONFIG_BLK_DEV_SIIMAGE=y
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_IDE_ARM is not set
+CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_IDEDMA_IVB is not set
+# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+CONFIG_IEEE1394=m
+
+#
+# Subsystem Options
+#
+# CONFIG_IEEE1394_VERBOSEDEBUG is not set
+# CONFIG_IEEE1394_OUI_DB is not set
+CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y
+CONFIG_IEEE1394_CONFIG_ROM_IP1394=y
+# CONFIG_IEEE1394_EXPORT_FULL_API is not set
+
+#
+# Device Drivers
+#
+
+#
+# Texas Instruments PCILynx requires I2C
+#
+CONFIG_IEEE1394_OHCI1394=m
+
+#
+# Protocol Drivers
+#
+CONFIG_IEEE1394_VIDEO1394=m
+CONFIG_IEEE1394_SBP2=m
+# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
+CONFIG_IEEE1394_ETH1394=m
+CONFIG_IEEE1394_DV1394=m
+CONFIG_IEEE1394_RAWIO=m
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=m
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_DM9000 is not set
+
+#
+# Tulip family network device support
+#
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_NET_PCI is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+CONFIG_R8169=y
+# CONFIG_R8169_NAPI is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_VR41XX=y
+CONFIG_SERIAL_VR41XX_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_TANBAC_TB0219 is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_DRM is not set
+CONFIG_GPIO_VR41XX=y
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_MACMODES is not set
+CONFIG_FB_FIRMWARE_EDID=y
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+CONFIG_FB_SMIVGX=y
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+
+#
+# Logo configuration
+#
+# CONFIG_LOGO is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=m
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_EHCI_HCD=m
+# CONFIG_USB_EHCI_SPLIT_ISO is not set
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=m
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=m
+CONFIG_USB_HIDINPUT=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_TOUCHSCREEN is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGETKIT is not set
+# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
+#
+# CONFIG_RTC_CLASS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_XFS_FS=y
+CONFIG_XFS_QUOTA=y
+# CONFIG_XFS_SECURITY is not set
+CONFIG_XFS_POSIX_ACL=y
+# CONFIG_XFS_RT is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+CONFIG_ROMFS_FS=m
+CONFIG_INOTIFY=y
+# CONFIG_QUOTA is not set
+CONFIG_QUOTACTL=y
+# CONFIG_DNOTIFY is not set
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=m
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_FS is not set
+CONFIG_CROSSCOMPILE=y
+CONFIG_CMDLINE="mem=64M console=ttyVR0,115200 ip=any root=/dev/nfs"
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=m
diff --git a/arch/mips/configs/workpad_defconfig b/arch/mips/configs/workpad_defconfig
index 7132e296d40a..ac7765eb8da7 100644
--- a/arch/mips/configs/workpad_defconfig
+++ b/arch/mips/configs/workpad_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16-rc1
-# Fri Jan 27 15:40:36 2006
+# Linux kernel version: 2.6.17-rc2
+# Tue Apr 25 00:09:33 2006
 #
 CONFIG_MIPS=y
 
@@ -70,6 +70,8 @@ CONFIG_IBM_WORKPAD=y
 # CONFIG_VICTOR_MPC30X is not set
 # CONFIG_ZAO_CAPCELLA is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
@@ -88,7 +90,7 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
 # CONFIG_CPU_MIPS64_R2 is not set
 # CONFIG_CPU_R3000 is not set
 # CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_VR41XX is not set
+CONFIG_CPU_VR41XX=y
 # CONFIG_CPU_R4300 is not set
 # CONFIG_CPU_R4X00 is not set
 # CONFIG_CPU_TX49XX is not set
@@ -101,18 +103,21 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
 # CONFIG_CPU_RM7000 is not set
 # CONFIG_CPU_RM9000 is not set
 # CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_VR41XX=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
 
 #
 # Kernel type
 #
-# CONFIG_32BIT is not set
+CONFIG_32BIT=y
 # CONFIG_64BIT is not set
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 # CONFIG_MIPS_MT is not set
-CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
@@ -133,7 +138,6 @@ CONFIG_PREEMPT_NONE=y
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 
@@ -149,6 +153,7 @@ CONFIG_SYSVIPC=y
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+# CONFIG_RELAY is not set
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EMBEDDED=y
@@ -162,10 +167,6 @@ CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
 CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -177,7 +178,6 @@ CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
@@ -185,6 +185,9 @@ CONFIG_KMOD=y
 #
 # Block layer
 #
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
 
 #
 # IO Schedulers
@@ -220,6 +223,7 @@ CONFIG_PCMCIA_IOCTL=y
 # CONFIG_I82365 is not set
 # CONFIG_TCIC is not set
 CONFIG_PCMCIA_PROBE=y
+CONFIG_PCMCIA_VRC4171=y
 
 #
 # PCI Hotplug Support
@@ -230,6 +234,7 @@ CONFIG_PCMCIA_PROBE=y
 #
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
+CONFIG_TRAD_SIGNALS=y
 
 #
 # Networking
@@ -239,6 +244,7 @@ CONFIG_NET=y
 #
 # Networking options
 #
+# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -258,12 +264,15 @@ CONFIG_IP_FIB_HASH=y
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETFILTER is not set
 
 #
@@ -275,6 +284,11 @@ CONFIG_TCP_CONG_BIC=y
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
@@ -284,11 +298,6 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
 # CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
@@ -305,10 +314,8 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
+# CONFIG_IEEE80211 is not set
+CONFIG_WIRELESS_EXT=y
 
 #
 # Device Drivers
@@ -347,10 +354,12 @@ CONFIG_CONNECTOR=m
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
+CONFIG_BLK_DEV_RAM=m
 CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CDROM_PKTCDVD is not set
-CONFIG_ATA_OVER_ETH=m
+# CONFIG_ATA_OVER_ETH is not set
 
 #
 # ATA/ATAPI/MFM/RLL support
@@ -468,7 +477,38 @@ CONFIG_MII=m
 #
 # Wireless LAN (non-hamradio)
 #
-# CONFIG_NET_RADIO is not set
+CONFIG_NET_RADIO=y
+# CONFIG_NET_WIRELESS_RTNETLINK is not set
+
+#
+# Obsolete Wireless cards support (pre-802.11)
+#
+# CONFIG_STRIP is not set
+# CONFIG_ARLAN is not set
+# CONFIG_WAVELAN is not set
+# CONFIG_PCMCIA_WAVELAN is not set
+# CONFIG_PCMCIA_NETWAVE is not set
+
+#
+# Wireless 802.11 Frequency Hopping cards support
+#
+# CONFIG_PCMCIA_RAYCS is not set
+
+#
+# Wireless 802.11b ISA/PCI cards support
+#
+CONFIG_HERMES=m
+# CONFIG_ATMEL is not set
+
+#
+# Wireless 802.11b Pcmcia/Cardbus cards support
+#
+CONFIG_PCMCIA_HERMES=m
+# CONFIG_PCMCIA_SPECTRUM is not set
+# CONFIG_AIRO_CS is not set
+# CONFIG_PCMCIA_WL3501 is not set
+# CONFIG_HOSTAP is not set
+CONFIG_NET_WIRELESS=y
 
 #
 # PCMCIA network device support
@@ -512,10 +552,7 @@ CONFIG_INPUT=y
 #
 # Userland interfaces
 #
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
 # CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
@@ -533,11 +570,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 #
 # Hardware I/O ports
 #
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_LIBPS2 is not set
-CONFIG_SERIO_RAW=m
+# CONFIG_SERIO is not set
 # CONFIG_GAMEPORT is not set
 
 #
@@ -556,6 +589,10 @@ CONFIG_HW_CONSOLE=y
 #
 # Non-8250 serial port support
 #
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_VR41XX=y
+CONFIG_SERIAL_VR41XX_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -568,20 +605,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # Watchdog Cards
 #
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-
-#
-# ISA-based Watchdog Cards
-#
-# CONFIG_PCWATCHDOG is not set
-# CONFIG_MIXCOMWD is not set
-# CONFIG_WDT is not set
+# CONFIG_WATCHDOG is not set
 # CONFIG_RTC is not set
 # CONFIG_GEN_RTC is not set
 # CONFIG_DTLK is not set
@@ -597,6 +621,7 @@ CONFIG_WATCHDOG=y
 # CONFIG_SYNCLINK_CS is not set
 # CONFIG_CARDMAN_4000 is not set
 # CONFIG_CARDMAN_4040 is not set
+# CONFIG_GPIO_VR41XX is not set
 # CONFIG_RAW_DRIVER is not set
 
 #
@@ -632,10 +657,6 @@ CONFIG_WATCHDOG=y
 #
 
 #
-# Multimedia Capabilities Port drivers
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -667,6 +688,7 @@ CONFIG_DUMMY_CONSOLE=y
 #
 # CONFIG_USB_ARCH_HAS_HCD is not set
 # CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -683,12 +705,30 @@ CONFIG_DUMMY_CONSOLE=y
 # CONFIG_MMC is not set
 
 #
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
 # InfiniBand support
 #
 
 #
-# SN Devices
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
 #
+# CONFIG_RTC_CLASS is not set
 
 #
 # File systems
@@ -710,7 +750,7 @@ CONFIG_FS_POSIX_ACL=y
 CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
-CONFIG_AUTOFS_FS=y
+# CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=y
 CONFIG_FUSE_FS=m
 
@@ -733,10 +773,9 @@ CONFIG_FUSE_FS=m
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
+CONFIG_TMPFS=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-CONFIG_RELAYFS_FS=m
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -802,44 +841,20 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_FS is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE="console=ttyVR0,19200 mem=16M"
 
 #
 # Security options
 #
-CONFIG_KEYS=y
-CONFIG_KEYS_DEBUG_PROC_KEYS=y
+# CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 
 #
 # Cryptographic options
 #
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO is not set
 
 #
 # Hardware crypto devices
@@ -849,8 +864,6 @@ CONFIG_CRYPTO_CRC32C=m
 # Library routines
 #
 # CONFIG_CRC_CCITT is not set
-CONFIG_CRC16=m
+# CONFIG_CRC16 is not set
 CONFIG_CRC32=y
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
+# CONFIG_LIBCRC32C is not set
diff --git a/arch/mips/configs/yosemite_defconfig b/arch/mips/configs/yosemite_defconfig
index 67457850941d..b52d709de962 100644
--- a/arch/mips/configs/yosemite_defconfig
+++ b/arch/mips/configs/yosemite_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16-rc1
-# Fri Jan 27 15:40:37 2006
+# Linux kernel version: 2.6.17-rc2
+# Mon Apr 24 14:51:20 2006
 #
 CONFIG_MIPS=y
 
@@ -65,6 +65,8 @@ CONFIG_PMC_YOSEMITE=y
 # CONFIG_TOSHIBA_RBTX4938 is not set
 # CONFIG_HYPERTRANSPORT is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_DMA_COHERENT=y
 CONFIG_CPU_BIG_ENDIAN=y
@@ -116,7 +118,6 @@ CONFIG_PAGE_SIZE_4KB=y
 CONFIG_CPU_HAS_PREFETCH=y
 # CONFIG_MIPS_MT is not set
 # CONFIG_64BIT_PHYS_ADDR is not set
-# CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
@@ -140,7 +141,6 @@ CONFIG_PREEMPT_BKL=y
 # Code maturity level options
 #
 # CONFIG_EXPERIMENTAL is not set
-CONFIG_CLEAN_COMPILE=y
 CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 
@@ -157,6 +157,7 @@ CONFIG_SYSCTL=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 # CONFIG_CPUSETS is not set
+CONFIG_RELAY=y
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
@@ -170,10 +171,6 @@ CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
 CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -184,7 +181,6 @@ CONFIG_BASE_SMALL=0
 #
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
@@ -194,6 +190,8 @@ CONFIG_STOP_MACHINE=y
 # Block layer
 #
 # CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
 
 #
 # IO Schedulers
@@ -213,7 +211,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 #
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
-CONFIG_PCI_LEGACY_PROC=y
 # CONFIG_PCI_DEBUG is not set
 CONFIG_MMU=y
 
@@ -241,6 +238,7 @@ CONFIG_NET=y
 #
 # Networking options
 #
+# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=m
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -261,16 +259,19 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_BIC=y
 CONFIG_IPV6=m
 CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
+CONFIG_INET6_XFRM_TUNNEL=m
 CONFIG_INET6_TUNNEL=m
 CONFIG_IPV6_TUNNEL=m
 # CONFIG_NETFILTER is not set
@@ -340,10 +341,9 @@ CONFIG_CONNECTOR=m
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
+# CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
 CONFIG_ATA_OVER_ETH=m
 
 #
@@ -433,6 +433,7 @@ CONFIG_MII=y
 # CONFIG_HAMACHI is not set
 # CONFIG_R8169 is not set
 # CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
@@ -497,6 +498,7 @@ CONFIG_TITAN_GE=y
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
 CONFIG_SERIAL_8250_NR_UARTS=4
 CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_8250_EXTENDED is not set
@@ -506,6 +508,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -563,10 +566,6 @@ CONFIG_GEN_RTC_X=y
 #
 
 #
-# Multimedia Capabilities Port drivers
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -591,6 +590,7 @@ CONFIG_GEN_RTC_X=y
 #
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
 
 #
@@ -608,12 +608,29 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_MMC is not set
 
 #
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
 # InfiniBand support
 #
 # CONFIG_INFINIBAND is not set
 
 #
-# SN Devices
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
 #
 
 #
@@ -656,7 +673,6 @@ CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-CONFIG_RELAYFS_FS=m
 
 #
 # Miscellaneous filesystems
diff --git a/arch/mips/ddb5xxx/ddb5074/Makefile b/arch/mips/ddb5xxx/ddb5074/Makefile
index 488206b8d94e..304c02107b46 100644
--- a/arch/mips/ddb5xxx/ddb5074/Makefile
+++ b/arch/mips/ddb5xxx/ddb5074/Makefile
@@ -3,6 +3,6 @@
 # under Linux.
 #
 
-obj-y			+= setup.o irq.o int-handler.o nile4_pic.o
+obj-y			+= setup.o irq.o nile4_pic.o
 
 EXTRA_AFLAGS := $(CFLAGS)
diff --git a/arch/mips/ddb5xxx/ddb5074/int-handler.S b/arch/mips/ddb5xxx/ddb5074/int-handler.S
deleted file mode 100644
index a78644150b37..000000000000
--- a/arch/mips/ddb5xxx/ddb5074/int-handler.S
+++ /dev/null
@@ -1,120 +0,0 @@
-/*
- *  arch/mips/ddb5074/int-handler.S -- NEC DDB Vrc-5074 interrupt handler
- *
- *  Based on arch/mips/sgi/kernel/indyIRQ.S
- *
- *  Copyright (C) 1996 David S. Miller (dm@engr.sgi.com)
- *
- *  Copyright (C) 2000 Geert Uytterhoeven <geert@sonycom.com>
- *                     Sony Software Development Center Europe (SDCE), Brussels
- */
-#include <asm/asm.h>
-#include <asm/mipsregs.h>
-#include <asm/regdef.h>
-#include <asm/stackframe.h>
-
-/* A lot of complication here is taken away because:
- *
- * 1) We handle one interrupt and return, sitting in a loop and moving across
- *    all the pending IRQ bits in the cause register is _NOT_ the answer, the
- *    common case is one pending IRQ so optimize in that direction.
- *
- * 2) We need not check against bits in the status register IRQ mask, that
- *    would make this routine slow as hell.
- *
- * 3) Linux only thinks in terms of all IRQs on or all IRQs off, nothing in
- *    between like BSD spl() brain-damage.
- *
- * Furthermore, the IRQs on the INDY look basically (barring software IRQs
- * which we don't use at all) like:
- *
- *	MIPS IRQ	Source
- *      --------        ------
- *             0	Software (ignored)
- *             1        Software (ignored)
- *             2        Local IRQ level zero
- *             3        Local IRQ level one
- *             4        8254 Timer zero
- *             5        8254 Timer one
- *             6        Bus Error
- *             7        R4k timer (what we use)
- *
- * We handle the IRQ according to _our_ priority which is:
- *
- * Highest ----     R4k Timer
- *                  Local IRQ zero
- *                  Local IRQ one
- *                  Bus Error
- *                  8254 Timer zero
- * Lowest  ----     8254 Timer one
- *
- * then we just return, if multiple IRQs are pending then we will just take
- * another exception, big deal.
- */
-
-	.text
-	.set	noreorder
-	.set	noat
-	.align	5
-	NESTED(ddbIRQ, PT_SIZE, sp)
-	SAVE_ALL
-	CLI
-	.set	at
-	mfc0	s0, CP0_CAUSE		# get irq mask
-
-#if 1
-	mfc0	t2,CP0_STATUS		# get enabled interrupts
-	and	s0,t2			# isolate allowed ones
-#endif
-	/* First we check for r4k counter/timer IRQ. */
-	andi	a0, s0, CAUSEF_IP2	# delay slot, check local level zero
-	beq	a0, zero, 1f
-	 andi	a0, s0, CAUSEF_IP3	# delay slot, check local level one
-
-	/* Wheee, local level zero interrupt. */
-	jal	ddb_local0_irqdispatch
-	 move	a0, sp			# delay slot
-
-	j	ret_from_irq
-	 nop				# delay slot
-
-1:
-	beq	a0, zero, 1f
-	 andi	a0, s0, CAUSEF_IP6	# delay slot, check bus error
-
-	/* Wheee, local level one interrupt. */
-	move	a0, sp
-	jal	ddb_local1_irqdispatch
-	 nop
-
-	j	ret_from_irq
-	 nop
-
-1:
-	beq	a0, zero, 1f
-	 nop
-
-	/* Wheee, an asynchronous bus error... */
-	move	a0, sp
-	jal	ddb_buserror_irq
-	 nop
-
-	j	ret_from_irq
-	 nop
-
-1:
-	/* Here by mistake?  This is possible, what can happen
-	 * is that by the time we take the exception the IRQ
-	 * pin goes low, so just leave if this is the case.
-	 */
-	andi	a0, s0, (CAUSEF_IP4 | CAUSEF_IP5)
-	beq	a0, zero, 1f
-
-	/* Must be one of the 8254 timers... */
-	move	a0, sp
-	jal	ddb_8254timer_irq
-	 nop
-1:
-	j	ret_from_irq
-	 nop
-	END(ddbIRQ)
diff --git a/arch/mips/ddb5xxx/ddb5074/irq.c b/arch/mips/ddb5xxx/ddb5074/irq.c
index 45088a1be414..60c087b7738c 100644
--- a/arch/mips/ddb5xxx/ddb5074/irq.c
+++ b/arch/mips/ddb5xxx/ddb5074/irq.c
@@ -21,8 +21,6 @@
 #include <asm/ddb5xxx/ddb5074.h>
 
 
-extern asmlinkage void ddbIRQ(void);
-
 static struct irqaction irq_cascade = { no_action, 0, CPU_MASK_NONE, "cascade", NULL, NULL };
 
 #define M1543_PNP_CONFIG	0x03f0	/* PnP Config Port */
@@ -90,7 +88,7 @@ static void m1543_irq_setup(void)
 
 }
 
-void ddb_local0_irqdispatch(struct pt_regs *regs)
+static void ddb_local0_irqdispatch(struct pt_regs *regs)
 {
 	u32 mask;
 	int nile4_irq;
@@ -118,29 +116,41 @@ void ddb_local0_irqdispatch(struct pt_regs *regs)
 		}
 }
 
-void ddb_local1_irqdispatch(void)
+static void ddb_local1_irqdispatch(void)
 {
 	printk("ddb_local1_irqdispatch called\n");
 }
 
-void ddb_buserror_irq(void)
+static void ddb_buserror_irq(void)
 {
 	printk("ddb_buserror_irq called\n");
 }
 
-void ddb_8254timer_irq(void)
+static void ddb_8254timer_irq(void)
 {
 	printk("ddb_8254timer_irq called\n");
 }
 
+asmlinkage void plat_irq_dispatch(struct pt_regs *regs)
+{
+	unsigned int pending = read_c0_cause() & read_c0_status();
+
+	if (pending & CAUSEF_IP2)
+		ddb_local0_irqdispatch(regs);
+	else if (pending & CAUSEF_IP3)
+		ddb_local1_irqdispatch();
+	else if (pending & CAUSEF_IP6)
+		ddb_buserror_irq();
+	else if (pending & (CAUSEF_IP4 | CAUSEF_IP5))
+		ddb_8254timer_irq();
+}
+
 void __init arch_init_irq(void)
 {
 	/* setup cascade interrupts */
 	setup_irq(NILE4_IRQ_BASE  + NILE4_INT_INTE, &irq_cascade);
 	setup_irq(CPU_IRQ_BASE + CPU_NILE4_CASCADE, &irq_cascade);
 
-	set_except_vector(0, ddbIRQ);
-
 	nile4_irq_setup(NILE4_IRQ_BASE);
 	m1543_irq_setup();
 	init_i8259_irqs();
diff --git a/arch/mips/ddb5xxx/ddb5476/Makefile b/arch/mips/ddb5xxx/ddb5476/Makefile
index 61eec363cb02..ab0312cb47b4 100644
--- a/arch/mips/ddb5xxx/ddb5476/Makefile
+++ b/arch/mips/ddb5xxx/ddb5476/Makefile
@@ -3,7 +3,7 @@
 # under Linux.
 #
 
-obj-y			+= setup.o irq.o int-handler.o nile4_pic.o vrc5476_irq.o
+obj-y			+= setup.o irq.o nile4_pic.o vrc5476_irq.o
 obj-$(CONFIG_KGDB)	+= dbg_io.o
 
 EXTRA_AFLAGS := $(CFLAGS)
diff --git a/arch/mips/ddb5xxx/ddb5476/dbg_io.c b/arch/mips/ddb5xxx/ddb5476/dbg_io.c
index 85e9e5013679..f2296a999953 100644
--- a/arch/mips/ddb5xxx/ddb5476/dbg_io.c
+++ b/arch/mips/ddb5xxx/ddb5476/dbg_io.c
@@ -86,7 +86,7 @@ void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop)
         /* disable interrupts */
         UART16550_WRITE(OFS_INTR_ENABLE, 0);
 
-        /* set up buad rate */
+        /* set up baud rate */
         {
                 uint32 divisor;
 
diff --git a/arch/mips/ddb5xxx/ddb5476/int-handler.S b/arch/mips/ddb5xxx/ddb5476/int-handler.S
deleted file mode 100644
index 12c292e189ba..000000000000
--- a/arch/mips/ddb5xxx/ddb5476/int-handler.S
+++ /dev/null
@@ -1,112 +0,0 @@
-/*
- * Copyright 2001 MontaVista Software Inc.
- * Author: jsun@mvista.com or jsun@junsun.net
- *
- * First-level interrupt dispatcher for ddb5476
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#include <asm/asm.h>
-#include <asm/mipsregs.h>
-#include <asm/addrspace.h>
-#include <asm/regdef.h>
-#include <asm/stackframe.h>
-
-#include <asm/ddb5xxx/ddb5476.h>
-
-/*
- * first level interrupt dispatcher for ocelot board -
- * We check for the timer first, then check PCI ints A and D.
- * Then check for serial IRQ and fall through.
- */
-	.align	5
-	NESTED(ddb5476_handle_int, PT_SIZE, sp)
-	SAVE_ALL
-	CLI
-	.set	at
-	.set	noreorder
-	mfc0	t0, CP0_CAUSE
-	mfc0	t2, CP0_STATUS
-
-	and	t0, t2
-
-        andi    t1, t0, STATUSF_IP7     /* cpu timer */
-        bnez    t1, ll_cpu_ip7
-        andi    t1, t0, STATUSF_IP2	/* vrc5476 & i8259 */
-        bnez    t1, ll_cpu_ip2
-        andi    t1, t0, STATUSF_IP3
-        bnez    t1, ll_cpu_ip3
-        andi    t1, t0, STATUSF_IP4
-        bnez    t1, ll_cpu_ip4
-        andi    t1, t0, STATUSF_IP5
-        bnez    t1, ll_cpu_ip5
-        andi    t1, t0, STATUSF_IP6
-        bnez    t1, ll_cpu_ip6
-        andi    t1, t0, STATUSF_IP0     /* software int 0 */
-        bnez    t1, ll_cpu_ip0
-        andi    t1, t0, STATUSF_IP1     /* software int 1 */
-        bnez    t1, ll_cpu_ip1
-        nop
-
-	.set	reorder
-
-	/* wrong alarm or masked ... */
-	// j	spurious_interrupt
-	move 	a0, sp
-	jal	vrc5476_irq_dispatch
-	j	ret_from_irq
-	nop
-
-	.align	5
-
-ll_cpu_ip0:
-	li	a0, CPU_IRQ_BASE + 0
-	move	a1, sp
-	jal	do_IRQ
-	j	ret_from_irq
-
-ll_cpu_ip1:
-	li	a0, CPU_IRQ_BASE + 1
-	move	a1, sp
-	jal	do_IRQ
-	j	ret_from_irq
-
-ll_cpu_ip2:		/* jump to second-level dispatching */
-	move	a0, sp
-	jal	vrc5476_irq_dispatch
-	j	ret_from_irq
-
-ll_cpu_ip3:
-	li	a0, CPU_IRQ_BASE + 3
-	move	a1, sp
-	jal	do_IRQ
-	j	ret_from_irq
-
-ll_cpu_ip4:
-	li	a0, CPU_IRQ_BASE + 4
-	move	a1, sp
-	jal	do_IRQ
-	j	ret_from_irq
-
-ll_cpu_ip5:
-	li	a0, CPU_IRQ_BASE + 5
-	move	a1, sp
-	jal	do_IRQ
-	j	ret_from_irq
-
-ll_cpu_ip6:
-	li	a0, CPU_IRQ_BASE + 6
-	move	a1, sp
-	jal	do_IRQ
-	j	ret_from_irq
-
-ll_cpu_ip7:
-	li	a0, CPU_IRQ_BASE + 7
-	move	a1, sp
-	jal	do_IRQ
-	j	ret_from_irq
-
-	END(ddb5476_handle_int)
diff --git a/arch/mips/ddb5xxx/ddb5476/irq.c b/arch/mips/ddb5xxx/ddb5476/irq.c
index 5388b5868c4a..7583a1f30711 100644
--- a/arch/mips/ddb5xxx/ddb5476/irq.c
+++ b/arch/mips/ddb5xxx/ddb5476/irq.c
@@ -110,11 +110,36 @@ static void nile4_irq_setup(void)
 static struct irqaction irq_cascade = { no_action, 0, CPU_MASK_NONE, "cascade", NULL, NULL };
 static struct irqaction irq_error = { no_action, 0, CPU_MASK_NONE, "error", NULL, NULL };
 
-extern asmlinkage void ddb5476_handle_int(void);
 extern int setup_irq(unsigned int irq, struct irqaction *irqaction);
 extern void mips_cpu_irq_init(u32 irq_base);
 extern void vrc5476_irq_init(u32 irq_base);
 
+extern void vrc5476_irq_dispatch(struct pt_regs *regs);
+
+asmlinkage void plat_irq_dispatch(struct pt_regs *regs)
+{
+	unsigned int pending = read_c0_cause() & read_c0_status();
+
+	if (pending & STATUSF_IP7)
+		do_IRQ(CPU_IRQ_BASE + 7, regs);
+	else if (pending & STATUSF_IP2)
+		vrc5476_irq_dispatch(regs);
+	else if (pending & STATUSF_IP3)
+		do_IRQ(CPU_IRQ_BASE + 3, regs);
+	else if (pending & STATUSF_IP4)
+		do_IRQ(CPU_IRQ_BASE + 4, regs);
+	else if (pending & STATUSF_IP5)
+		do_IRQ(CPU_IRQ_BASE + 5, regs);
+	else if (pending & STATUSF_IP6)
+		do_IRQ(CPU_IRQ_BASE + 6, regs);
+	else if (pending & STATUSF_IP0)
+		do_IRQ(CPU_IRQ_BASE, regs);
+	else if (pending & STATUSF_IP1)
+		do_IRQ(CPU_IRQ_BASE + 1, regs);
+
+	vrc5476_irq_dispatch(regs);
+}
+
 void __init arch_init_irq(void)
 {
 	/* hardware initialization */
@@ -137,7 +162,4 @@ void __init arch_init_irq(void)
 	setup_irq(VRC5476_IRQ_BASE + VRC5476_IRQ_LBRT, &irq_error);
 	setup_irq(VRC5476_IRQ_BASE + VRC5476_IRQ_PCIS, &irq_error);
 	setup_irq(VRC5476_IRQ_BASE + VRC5476_IRQ_PCI, &irq_error);
-
-	/* setup the grandpa intr vector */
-	set_except_vector(0, ddb5476_handle_int);
 }
diff --git a/arch/mips/ddb5xxx/ddb5476/vrc5476_irq.c b/arch/mips/ddb5xxx/ddb5476/vrc5476_irq.c
index f66fe5b58636..a3c5e7b18018 100644
--- a/arch/mips/ddb5xxx/ddb5476/vrc5476_irq.c
+++ b/arch/mips/ddb5xxx/ddb5476/vrc5476_irq.c
@@ -77,11 +77,9 @@ vrc5476_irq_init(u32 base)
 }
 
 
-asmlinkage void
+void
 vrc5476_irq_dispatch(struct pt_regs *regs)
 {
-	extern void spurious_interrupt(void);
-
 	u32 mask;
 	int nile4_irq;
 
@@ -107,5 +105,5 @@ vrc5476_irq_dispatch(struct pt_regs *regs)
 			return;
 		}
 	}
-	spurious_interrupt();
+	spurious_interrupt(regs);
 }
diff --git a/arch/mips/ddb5xxx/ddb5477/Makefile b/arch/mips/ddb5xxx/ddb5477/Makefile
index b79b43c9f93b..ea68815ad17a 100644
--- a/arch/mips/ddb5xxx/ddb5477/Makefile
+++ b/arch/mips/ddb5xxx/ddb5477/Makefile
@@ -2,7 +2,7 @@
 # Makefile for NEC DDB-Vrc5477 board
 #
 
-obj-y	 		+= int-handler.o irq.o irq_5477.o setup.o lcd44780.o
+obj-y	 		+= irq.o irq_5477.o setup.o lcd44780.o
 
 obj-$(CONFIG_RUNTIME_DEBUG) 	+= debug.o
 obj-$(CONFIG_KGDB)		+= kgdb_io.o
diff --git a/arch/mips/ddb5xxx/ddb5477/int-handler.S b/arch/mips/ddb5xxx/ddb5477/int-handler.S
deleted file mode 100644
index a2502a14400e..000000000000
--- a/arch/mips/ddb5xxx/ddb5477/int-handler.S
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * Copyright 2001 MontaVista Software Inc.
- * Author: jsun@mvista.com or jsun@junsun.net
- *
- * First-level interrupt dispatcher for ddb5477
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#include <asm/asm.h>
-#include <asm/mipsregs.h>
-#include <asm/addrspace.h>
-#include <asm/regdef.h>
-#include <asm/stackframe.h>
-#include <asm/ddb5xxx/ddb5477.h>
-
-/*
- * first level interrupt dispatcher for ocelot board -
- * We check for the timer first, then check PCI ints A and D.
- * Then check for serial IRQ and fall through.
- */
-	.align	5
-	NESTED(ddb5477_handle_int, PT_SIZE, sp)
-	SAVE_ALL
-	CLI
-	.set	at
-	.set	noreorder
-	mfc0	t0, CP0_CAUSE
-	mfc0	t2, CP0_STATUS
-
-	and	t0, t2
-
-	andi	t1, t0, STATUSF_IP7	/* cpu timer */
-	bnez	t1, ll_cputimer_irq
-	andi	t1, t0, (STATUSF_IP2 | STATUSF_IP3 | STATUSF_IP4 | STATUSF_IP5 | STATUSF_IP6 )
-	bnez	t1, ll_vrc5477_irq
-	andi	t1, t0, STATUSF_IP0	/* software int 0 */
-	bnez	t1, ll_cpu_ip0
-	andi	t1, t0, STATUSF_IP1	/* software int 1 */
-	bnez	t1, ll_cpu_ip1
-	nop
-	.set	reorder
-
-	/* wrong alarm or masked ... */
-	j	spurious_interrupt
-	nop
-	END(ddb5477_handle_int)
-
-	.align	5
-
-ll_vrc5477_irq:
-	move	a0, sp
-	jal	vrc5477_irq_dispatch
-	j	ret_from_irq
-
-ll_cputimer_irq:
-	li	a0, CPU_IRQ_BASE + 7
-	move	a1, sp
-	jal	do_IRQ
-	j	ret_from_irq
-
-
-ll_cpu_ip0:
-	li	a0, CPU_IRQ_BASE + 0
-	move	a1, sp
-	jal	do_IRQ
-	j	ret_from_irq
-
-ll_cpu_ip1:
-	li	a0, CPU_IRQ_BASE + 1
-	move	a1, sp
-	jal	do_IRQ
-	j	ret_from_irq
diff --git a/arch/mips/ddb5xxx/ddb5477/irq.c b/arch/mips/ddb5xxx/ddb5477/irq.c
index 9ffe1a9142ca..de433cf9fb50 100644
--- a/arch/mips/ddb5xxx/ddb5477/irq.c
+++ b/arch/mips/ddb5xxx/ddb5477/irq.c
@@ -75,7 +75,6 @@ set_pci_int_attr(u32 pci, u32 intn, u32 active, u32 trigger)
 
 extern void vrc5477_irq_init(u32 base);
 extern void mips_cpu_irq_init(u32 base);
-extern asmlinkage void ddb5477_handle_int(void);
 extern int setup_irq(unsigned int irq, struct irqaction *irqaction);
 static struct irqaction irq_cascade = { no_action, 0, CPU_MASK_NONE, "cascade", NULL, NULL };
 
@@ -135,9 +134,6 @@ void __init arch_init_irq(void)
 	/* setup cascade interrupts */
 	setup_irq(VRC5477_IRQ_BASE + VRC5477_I8259_CASCADE, &irq_cascade);
 	setup_irq(CPU_IRQ_BASE + CPU_VRC5477_CASCADE, &irq_cascade);
-
-	/* hook up the first-level interrupt handler */
-	set_except_vector(0, ddb5477_handle_int);
 }
 
 u8 i8259_interrupt_ack(void)
@@ -159,7 +155,7 @@ u8 i8259_interrupt_ack(void)
  * the first level int-handler will jump here if it is a vrc5477 irq
  */
 #define	NUM_5477_IRQS	32
-asmlinkage void
+static void
 vrc5477_irq_dispatch(struct pt_regs *regs)
 {
 	u32 intStatus;
@@ -197,3 +193,21 @@ vrc5477_irq_dispatch(struct pt_regs *regs)
 		}
 	}
 }
+
+#define VR5477INTS (STATUSF_IP2|STATUSF_IP3|STATUSF_IP4|STATUSF_IP5|STATUSF_IP6)
+
+asmlinkage void plat_irq_dispatch(struct pt_regs *regs)
+{
+	unsigned int pending = read_c0_cause() & read_c0_status();
+
+	if (pending & STATUSF_IP7)
+		do_IRQ(CPU_IRQ_BASE + 7, regs);
+	else if (pending & VR5477INTS)
+		vrc5477_irq_dispatch(regs);
+	else if (pending & STATUSF_IP0)
+		do_IRQ(CPU_IRQ_BASE, regs);
+	else if (pending & STATUSF_IP1)
+		do_IRQ(CPU_IRQ_BASE + 1, regs);
+	else
+		spurious_interrupt(regs);
+}
diff --git a/arch/mips/ddb5xxx/ddb5477/kgdb_io.c b/arch/mips/ddb5xxx/ddb5477/kgdb_io.c
index 1d18d590495b..385bbdb10170 100644
--- a/arch/mips/ddb5xxx/ddb5477/kgdb_io.c
+++ b/arch/mips/ddb5xxx/ddb5477/kgdb_io.c
@@ -86,7 +86,7 @@ void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop)
         /* disable interrupts */
         UART16550_WRITE(OFS_INTR_ENABLE, 0);
 
-        /* set up buad rate */
+        /* set up baud rate */
         {
                 uint32 divisor;
 
diff --git a/arch/mips/dec/boot/decstation.c b/arch/mips/dec/boot/decstation.c
index 56fd4277555e..4db8bacaf22d 100644
--- a/arch/mips/dec/boot/decstation.c
+++ b/arch/mips/dec/boot/decstation.c
@@ -1,6 +1,7 @@
 /*
  * arch/mips/dec/decstation.c
  */
+#include <asm/sections.h>
 
 #define RELOC
 #define INITRD
@@ -24,7 +25,7 @@
 #define INITRD_START (*(unsigned long *) (PARAM+0x218))
 #define INITRD_SIZE (*(unsigned long *) (PARAM+0x21c))
 
-extern int _ftext, _end;		/* begin and end of kernel image */
+extern int _ftext;			/* begin and end of kernel image */
 extern void kernel_entry(int, char **, unsigned long, int *);
 
 void * memcpy(void * dest, const void *src, unsigned int count)
diff --git a/arch/mips/dec/int-handler.S b/arch/mips/dec/int-handler.S
index 41fa372007bf..e8ec93e33fe6 100644
--- a/arch/mips/dec/int-handler.S
+++ b/arch/mips/dec/int-handler.S
@@ -36,7 +36,7 @@
 		.text
 		.set	noreorder
 /*
- * decstation_handle_int: Interrupt handler for DECstations
+ * plat_irq_dispatch: Interrupt handler for DECstations
  *
  * We follow the model in the Indy interrupt code by David Miller, where he
  * says: a lot of complication here is taken away because:
@@ -125,11 +125,7 @@
  * just take another exception, big deal.
  */
 		.align	5
-		NESTED(decstation_handle_int, PT_SIZE, ra)
-		.set	noat
-		SAVE_ALL
-		CLI				# TEST: interrupts should be off
-		.set	at
+		NESTED(plat_irq_dispatch, PT_SIZE, ra)
 		.set	noreorder
 
 		/*
@@ -282,9 +278,11 @@ fpu:
 #endif
 
 spurious:
-		j	spurious_interrupt
+		jal	spurious_interrupt
 		 nop
-		END(decstation_handle_int)
+		j	ret_from_irq
+		 nop
+		END(plat_irq_dispatch)
 
 /*
  * Generic unimplemented interrupt routines -- cpu_mask_nr_tbl
diff --git a/arch/mips/dec/setup.c b/arch/mips/dec/setup.c
index 7c1ca8f6330e..ad5d436d80c1 100644
--- a/arch/mips/dec/setup.c
+++ b/arch/mips/dec/setup.c
@@ -48,8 +48,6 @@ extern void dec_machine_halt(void);
 extern void dec_machine_power_off(void);
 extern irqreturn_t dec_intr_halt(int irq, void *dev_id, struct pt_regs *regs);
 
-extern asmlinkage void decstation_handle_int(void);
-
 unsigned long dec_kn_slot_base, dec_kn_slot_size;
 
 EXPORT_SYMBOL(dec_kn_slot_base);
@@ -744,7 +742,6 @@ void __init arch_init_irq(void)
 		panic("Don't know how to set this up!");
 		break;
 	}
-	set_except_vector(0, decstation_handle_int);
 
 	/* Free the FPU interrupt if the exception is present. */
 	if (!cpu_has_nofpuex) {
diff --git a/arch/mips/defconfig b/arch/mips/defconfig
index 42d5cd7927cb..607e2985ffe3 100644
--- a/arch/mips/defconfig
+++ b/arch/mips/defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16-rc1
-# Fri Jan 27 15:39:51 2006
+# Linux kernel version: 2.6.17-rc2
+# Mon Apr 24 14:50:54 2006
 #
 CONFIG_MIPS=y
 
@@ -64,6 +64,8 @@ CONFIG_SGI_IP22=y
 # CONFIG_TOSHIBA_RBTX4927 is not set
 # CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_ARC=y
 CONFIG_DMA_NONCOHERENT=y
@@ -121,7 +123,6 @@ CONFIG_BOARD_SCACHE=y
 CONFIG_IP22_CPU_SCACHE=y
 # CONFIG_MIPS_MT is not set
 # CONFIG_64BIT_PHYS_ADDR is not set
-# CONFIG_CPU_ADVANCED is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
@@ -143,7 +144,6 @@ CONFIG_PREEMPT_VOLUNTARY=y
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 
@@ -160,6 +160,7 @@ CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
+CONFIG_RELAY=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EMBEDDED=y
@@ -173,10 +174,6 @@ CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
 CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -188,7 +185,6 @@ CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
@@ -197,6 +193,8 @@ CONFIG_KMOD=y
 # Block layer
 #
 # CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
 
 #
 # IO Schedulers
@@ -242,6 +240,7 @@ CONFIG_NET=y
 #
 # Networking options
 #
+# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -264,6 +263,7 @@ CONFIG_IP_PNP_BOOTP=y
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
 CONFIG_INET_TUNNEL=m
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
@@ -305,9 +305,12 @@ CONFIG_IP_VS_NQ=m
 CONFIG_IP_VS_FTP=m
 CONFIG_IPV6=m
 CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
+CONFIG_INET6_XFRM_TUNNEL=m
 CONFIG_INET6_TUNNEL=m
 CONFIG_IPV6_TUNNEL=m
 CONFIG_NETFILTER=y
@@ -330,11 +333,14 @@ CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
 CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
 CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
 CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
 CONFIG_NETFILTER_XT_MATCH_HELPER=m
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
 CONFIG_NETFILTER_XT_MATCH_MAC=m
 CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
 CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
 CONFIG_NETFILTER_XT_MATCH_REALM=m
 CONFIG_NETFILTER_XT_MATCH_SCTP=m
@@ -357,20 +363,19 @@ CONFIG_IP_NF_IRC=m
 CONFIG_IP_NF_TFTP=m
 CONFIG_IP_NF_AMANDA=m
 CONFIG_IP_NF_PPTP=m
+CONFIG_IP_NF_H323=m
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
 CONFIG_IP_NF_MATCH_TOS=m
 CONFIG_IP_NF_MATCH_RECENT=m
 CONFIG_IP_NF_MATCH_ECN=m
 CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
+CONFIG_IP_NF_MATCH_AH=m
 CONFIG_IP_NF_MATCH_TTL=m
 CONFIG_IP_NF_MATCH_OWNER=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
 CONFIG_IP_NF_MATCH_HASHLIMIT=m
-CONFIG_IP_NF_MATCH_POLICY=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
@@ -388,6 +393,7 @@ CONFIG_IP_NF_NAT_FTP=m
 CONFIG_IP_NF_NAT_TFTP=m
 CONFIG_IP_NF_NAT_AMANDA=m
 CONFIG_IP_NF_NAT_PPTP=m
+CONFIG_IP_NF_NAT_H323=m
 CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_TOS=m
 CONFIG_IP_NF_TARGET_ECN=m
@@ -408,12 +414,10 @@ CONFIG_IP6_NF_MATCH_RT=m
 CONFIG_IP6_NF_MATCH_OPTS=m
 CONFIG_IP6_NF_MATCH_FRAG=m
 CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_MULTIPORT=m
 CONFIG_IP6_NF_MATCH_OWNER=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AHESP=m
+CONFIG_IP6_NF_MATCH_AH=m
 CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_MATCH_POLICY=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_LOG=m
 CONFIG_IP6_NF_TARGET_REJECT=m
@@ -435,6 +439,11 @@ CONFIG_IP_SCTP=m
 # CONFIG_SCTP_HMAC_NONE is not set
 # CONFIG_SCTP_HMAC_SHA1 is not set
 CONFIG_SCTP_HMAC_MD5=y
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
@@ -444,11 +453,6 @@ CONFIG_SCTP_HMAC_MD5=y
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
 CONFIG_NET_DIVERT=y
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
@@ -508,6 +512,9 @@ CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
 CONFIG_IEEE80211_CRYPT_WEP=m
 CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_SOFTMAC=m
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+CONFIG_WIRELESS_EXT=y
 
 #
 # Device Drivers
@@ -546,7 +553,7 @@ CONFIG_CONNECTOR=m
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
+# CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
@@ -812,10 +819,6 @@ CONFIG_MAX_RAW_DEVS=256
 #
 
 #
-# Multimedia Capabilities Port drivers
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -857,6 +860,7 @@ CONFIG_LOGO_SGI_CLUT224=y
 #
 # CONFIG_USB_ARCH_HAS_HCD is not set
 # CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -873,12 +877,30 @@ CONFIG_LOGO_SGI_CLUT224=y
 # CONFIG_MMC is not set
 
 #
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
 # InfiniBand support
 #
 
 #
-# SN Devices
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
 #
+# CONFIG_RTC_CLASS is not set
 
 #
 # File systems
@@ -944,7 +966,6 @@ CONFIG_SYSFS=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-CONFIG_RELAYFS_FS=m
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -963,7 +984,6 @@ CONFIG_EFS_FS=m
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_SYSV_FS is not set
 CONFIG_UFS_FS=m
-# CONFIG_UFS_FS_WRITE is not set
 
 #
 # Network File Systems
@@ -1078,6 +1098,7 @@ CONFIG_NLS_UTF8=m
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_FS is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 
diff --git a/arch/mips/galileo-boards/ev96100/Makefile b/arch/mips/galileo-boards/ev96100/Makefile
index 58c02f9db69d..cd868ec78cbc 100644
--- a/arch/mips/galileo-boards/ev96100/Makefile
+++ b/arch/mips/galileo-boards/ev96100/Makefile
@@ -6,4 +6,4 @@
 # Makefile for the Galileo EV96100 board.
 #
 
-obj-y		+= init.o irq.o puts.o reset.o time.o int-handler.o setup.o
+obj-y		+= init.o irq.o puts.o reset.o time.o setup.o
diff --git a/arch/mips/galileo-boards/ev96100/int-handler.S b/arch/mips/galileo-boards/ev96100/int-handler.S
deleted file mode 100644
index ff4d10a38859..000000000000
--- a/arch/mips/galileo-boards/ev96100/int-handler.S
+++ /dev/null
@@ -1,33 +0,0 @@
-#include <asm/asm.h>
-#include <asm/mipsregs.h>
-#include <asm/regdef.h>
-#include <asm/stackframe.h>
-
-	.set	noat
-	.align	5
-
-NESTED(ev96100IRQ, PT_SIZE, sp)
-	SAVE_ALL
-	CLI				# Important: mark KERNEL mode !
-
-	mfc0	t0, CP0_CAUSE		# get pending interrupts
-	mfc0	t1, CP0_STATUS		# get enabled interrupts
-	and	t0, t1			# isolate allowed ones
-
-	# FIX ME add R7000 extensions
-	andi	t0,0xff00		# isolate pending bits
-	andi	a0, t0, CAUSEF_IP7
-	beq	a0, zero, 1f
-	move	a0, sp
-	jal	mips_timer_interrupt
-	j	ret_from_irq
-
-1:	beqz	t0, 3f			# spurious interrupt
-
-	move	a0, t0
-	move	a1, sp
-	jal	ev96100_cpu_irq
-	j	ret_from_irq
-
-3:	j	spurious_interrupt
-	END(ev96100IRQ)
diff --git a/arch/mips/galileo-boards/ev96100/irq.c b/arch/mips/galileo-boards/ev96100/irq.c
index 97bf094da4fe..ee5d6720f23b 100644
--- a/arch/mips/galileo-boards/ev96100/irq.c
+++ b/arch/mips/galileo-boards/ev96100/irq.c
@@ -40,8 +40,6 @@
 #include <linux/interrupt.h>
 #include <asm/irq_cpu.h>
 
-extern asmlinkage void ev96100IRQ(void);
-
 static inline unsigned int ffz8(unsigned int word)
 {
 	unsigned long k;
@@ -54,13 +52,26 @@ static inline unsigned int ffz8(unsigned int word)
 	return k;
 }
 
-asmlinkage void ev96100_cpu_irq(unsigned int pendin)
+extern void mips_timer_interrupt(struct pt_regs *regs);
+
+asmlinkage void ev96100_cpu_irq(unsigned int pending, struct pt_regs *regs)
 {
 	do_IRQ(ffz8(pending >> 8), regs);
 }
 
+asmlinkage void plat_irq_dispatch(struct pt_regs *regs)
+{
+	unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM;
+
+	if (pending & CAUSEF_IP7)
+		mips_timer_interrupt(regs);
+	else if (pending)
+		ev96100_cpu_irq(pending, regs);
+	else
+		spurious_interrupt(regs);
+}
+
 void __init arch_init_irq(void)
 {
-	set_except_vector(0, ev96100IRQ);
 	mips_cpu_irq_init(0);
 }
diff --git a/arch/mips/gt64120/ev64120/Makefile b/arch/mips/gt64120/ev64120/Makefile
index ebe91c57e173..b2c53a8f8718 100644
--- a/arch/mips/gt64120/ev64120/Makefile
+++ b/arch/mips/gt64120/ev64120/Makefile
@@ -6,6 +6,6 @@
 # Makefile for the Galileo EV64120 board.
 #
 
-obj-y	+= int-handler.o irq.o promcon.o reset.o serialGT.o setup.o
+obj-y	+= irq.o promcon.o reset.o serialGT.o setup.o
 
 EXTRA_AFLAGS := $(CFLAGS)
diff --git a/arch/mips/gt64120/ev64120/int-handler.S b/arch/mips/gt64120/ev64120/int-handler.S
deleted file mode 100644
index 752435faf2de..000000000000
--- a/arch/mips/gt64120/ev64120/int-handler.S
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- * int-handler.S
- *
- * Based on the cobalt handler.
- */
-#include <asm/asm.h>
-#include <asm/mipsregs.h>
-#include <asm/addrspace.h>
-#include <asm/regdef.h>
-#include <asm/stackframe.h>
-
-/*
- * galileo_handle_int -
- *      We check for the timer first, then check PCI ints A and D.
- *      Then check for serial IRQ and fall through.
- */
-		.align	5
-		.set	reorder
-		.set	noat
-		NESTED(galileo_handle_int, PT_SIZE, sp)
-		SAVE_ALL
-		CLI
-		.set	at
-		mfc0	t0,CP0_CAUSE
-		mfc0	t2,CP0_STATUS
-
-		and	t0,t2
-
-		andi	t1,t0,STATUSF_IP4 /* int2 hardware line (timer) */
-		bnez	t1,ll_gt64120_irq
-		andi	t1,t0,STATUSF_IP2 /* int0 hardware line */
-		bnez	t1,ll_pci_intA
-		andi	t1,t0,STATUSF_IP5 /* int3 hardware line */
-		bnez	t1,ll_pci_intD
-		andi	t1,t0,STATUSF_IP6 /* int4 hardware line */
-		bnez	t1,ll_serial_irq
-		andi	t1,t0,STATUSF_IP7 /* compare int */
-		bnez	t1,ll_compare_irq
-		nop
-
-    /* wrong alarm or masked ... */
-		j	spurious_interrupt
-		nop
-		END(galileo_handle_int)
-
-
-		.align	5
-		.set	reorder
-ll_gt64120_irq:
-		li	a0,4
-		move	a1,sp
-		jal	do_IRQ
-		nop
-		j	ret_from_irq
-		nop
-
-		.align	5
-		.set	reorder
-ll_compare_irq:
-		li 	a0,7
-		move	a1,sp
-		jal	do_IRQ
-		nop
-		j	ret_from_irq
-		nop
-
-		.align	5
-		.set	reorder
-ll_pci_intA:
-		move	a0,sp
-		jal	pci_intA
-		nop
-		j	ret_from_irq
-		nop
-
-#if 0
-		.align	5
-		.set	reorder
-ll_pci_intB:
-		move 	a0,sp
-		jal	pci_intB
-		nop
-		j	ret_from_irq
-		nop
-
-		.align	5
-		.set	reorder
-ll_pci_intC:
-		move 	a0,sp
-		jal	pci_intC
-		nop
-		j	ret_from_irq
-		nop
-#endif
-
-		.align	5
-		.set	reorder
-ll_pci_intD:
-		move 	a0,sp
-		jal	pci_intD
-		nop
-		j	ret_from_irq
-		nop
-
-		.align	5
-		.set	reorder
-ll_serial_irq:
-		li	a0,6
-		move	a1,sp
-		jal	do_IRQ
-		nop
-		j	ret_from_irq
-		nop
diff --git a/arch/mips/gt64120/ev64120/irq.c b/arch/mips/gt64120/ev64120/irq.c
index 3b186159b21a..46c468b26b30 100644
--- a/arch/mips/gt64120/ev64120/irq.c
+++ b/arch/mips/gt64120/ev64120/irq.c
@@ -46,14 +46,22 @@
 #include <asm/system.h>
 #include <asm/gt64120.h>
 
-asmlinkage inline void pci_intA(struct pt_regs *regs)
+asmlinkage void plat_irq_dispatch(struct pt_regs *regs)
 {
-	do_IRQ(GT_INTA, regs);
-}
-
-asmlinkage inline void pci_intD(struct pt_regs *regs)
-{
-	do_IRQ(GT_INTD, regs);
+	unsigned int pending = read_c0_status() & read_c0_cause();
+
+	if (pending & STATUSF_IP4)		/* int2 hardware line (timer) */
+		do_IRQ(4, regs);
+	else if (pending & STATUSF_IP2)		/* int0 hardware line */
+		do_IRQ(GT_INTA, regs);
+	else if (pending & STATUSF_IP5)		/* int3 hardware line */
+		do_IRQ(GT_INTD, regs);
+	else if (pending & STATUSF_IP6)		/* int4 hardware line */
+		do_IRQ(6, regs);
+	else if (pending & STATUSF_IP7)		/* compare int */
+		do_IRQ(7, regs);
+	else
+		spurious_interrupt(regs);
 }
 
 static void disable_ev64120_irq(unsigned int irq_nr)
@@ -109,16 +117,11 @@ static struct hw_interrupt_type ev64120_irq_type = {
 
 void gt64120_irq_setup(void)
 {
-	extern asmlinkage void galileo_handle_int(void);
-
 	/*
 	 * Clear all of the interrupts while we change the able around a bit.
 	 */
 	clear_c0_status(ST0_IM);
 
-	/* Sets the exception_handler array. */
-	set_except_vector(0, galileo_handle_int);
-
 	local_irq_disable();
 
 	/*
diff --git a/arch/mips/gt64120/ev64120/serialGT.c b/arch/mips/gt64120/ev64120/serialGT.c
index 16e34a546e54..8f0d835491ff 100644
--- a/arch/mips/gt64120/ev64120/serialGT.c
+++ b/arch/mips/gt64120/ev64120/serialGT.c
@@ -149,7 +149,7 @@ void serial_set(int channel, unsigned long baud)
 #else
 	/*
 	 * Note: Set baud rate, hardcoded here for rate of 115200
-	 * since became unsure of above "buad rate" algorithm (??).
+	 * since became unsure of above "baud rate" algorithm (??).
 	 */
 	outreg(channel, LCR, 0x83);
 	outreg(channel, DLM, 0x00);	// See note above
diff --git a/arch/mips/gt64120/momenco_ocelot/Makefile b/arch/mips/gt64120/momenco_ocelot/Makefile
index 7b59c6567c79..6f708df8373b 100644
--- a/arch/mips/gt64120/momenco_ocelot/Makefile
+++ b/arch/mips/gt64120/momenco_ocelot/Makefile
@@ -2,7 +2,7 @@
 # Makefile for Momentum's Ocelot board.
 #
 
-obj-y	 		+= int-handler.o irq.o prom.o reset.o setup.o
+obj-y	 		+= irq.o prom.o reset.o setup.o
 
 obj-$(CONFIG_KGDB)	+= dbg_io.o
 
diff --git a/arch/mips/gt64120/momenco_ocelot/dbg_io.c b/arch/mips/gt64120/momenco_ocelot/dbg_io.c
index 8720bccfdea2..f0a6a38fcf4d 100644
--- a/arch/mips/gt64120/momenco_ocelot/dbg_io.c
+++ b/arch/mips/gt64120/momenco_ocelot/dbg_io.c
@@ -73,7 +73,7 @@ void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop)
 	/* disable interrupts */
 	UART16550_WRITE(OFS_INTR_ENABLE, 0);
 
-	/* set up buad rate */
+	/* set up baud rate */
 	{
 		uint32 divisor;
 
diff --git a/arch/mips/gt64120/momenco_ocelot/int-handler.S b/arch/mips/gt64120/momenco_ocelot/int-handler.S
deleted file mode 100644
index 808acef248cc..000000000000
--- a/arch/mips/gt64120/momenco_ocelot/int-handler.S
+++ /dev/null
@@ -1,131 +0,0 @@
-/*
- * Copyright 2001 MontaVista Software Inc.
- * Author: jsun@mvista.com or jsun@junsun.net
- *
- * First-level interrupt dispatcher for ocelot board.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#include <asm/asm.h>
-#include <asm/mipsregs.h>
-#include <asm/addrspace.h>
-#include <asm/regdef.h>
-#include <asm/stackframe.h>
-
-/*
- * first level interrupt dispatcher for ocelot board -
- * We check for the timer first, then check PCI ints A and D.
- * Then check for serial IRQ and fall through.
- */
-		.align	5
-		NESTED(ocelot_handle_int, PT_SIZE, sp)
-		SAVE_ALL
-		CLI
-		.set	at
-		mfc0	t0, CP0_CAUSE
-		mfc0	t2, CP0_STATUS
-
-		and	t0, t2
-
-		 andi	t1, t0, STATUSF_IP2	/* int0 hardware line */
-		bnez	t1, ll_pri_enet_irq
-		 andi	t1, t0, STATUSF_IP3	/* int1 hardware line */
-		bnez	t1, ll_sec_enet_irq
-		 andi	t1, t0, STATUSF_IP4	/* int2 hardware line */
-		bnez	t1, ll_uart1_irq
-		 andi	t1, t0, STATUSF_IP5	/* int3 hardware line */
-		bnez	t1, ll_cpci_irq
-		 andi	t1, t0, STATUSF_IP6	/* int4 hardware line */
-		bnez	t1, ll_galileo_irq
-		 andi	t1, t0, STATUSF_IP7	/* cpu timer */
-		bnez	t1, ll_cputimer_irq
-
-                /* now look at the extended interrupts */
-		mfc0	t0, CP0_CAUSE
-		cfc0	t1, CP0_S1_INTCONTROL
-
-		/* shift the mask 8 bits left to line up the bits */
-		 sll	t2, t1, 8
-
-		 and	t0, t2
-		 srl	t0, t0, 16
-
-		 andi	t1, t0, STATUSF_IP8	/* int6 hardware line */
-		bnez	t1, ll_pmc1_irq
-		 andi	t1, t0, STATUSF_IP9	/* int7 hardware line */
-		bnez	t1, ll_pmc2_irq
-		 andi	t1, t0, STATUSF_IP10	/* int8 hardware line */
-		bnez	t1, ll_cpci_abcd_irq
-		 andi	t1, t0, STATUSF_IP11	/* int9 hardware line */
-		bnez	t1, ll_uart2_irq
-
-		.set	reorder
-
-		/* wrong alarm or masked ... */
-		j	spurious_interrupt
-		nop
-		END(ocelot_handle_int)
-
-		.align	5
-ll_pri_enet_irq:
-		li	a0, 2
-		move	a1, sp
-		jal	do_IRQ
-		j	ret_from_irq
-
-ll_sec_enet_irq:
-		li	a0, 3
-		move	a1, sp
-		jal	do_IRQ
-		j	ret_from_irq
-
-ll_uart1_irq:
-		li	a0, 4
-		move	a1, sp
-		jal	do_IRQ
-		j	ret_from_irq
-
-ll_cpci_irq:
-		li	a0, 5
-		move	a1, sp
-		jal	do_IRQ
-		j	ret_from_irq
-
-ll_galileo_irq:
-		li	a0, 6
-		move	a1, sp
-		jal	do_IRQ
-		j	ret_from_irq
-
-ll_cputimer_irq:
-		li	a0, 7
-		move	a1, sp
-		jal	do_IRQ
-		j	ret_from_irq
-
-ll_pmc1_irq:
-		li	a0, 8
-		move	a1, sp
-		jal	do_IRQ
-		j	ret_from_irq
-
-ll_pmc2_irq:
-		li	a0, 9
-		move	a1, sp
-		jal	do_IRQ
-		j	ret_from_irq
-
-ll_cpci_abcd_irq:
-		li	a0, 10
-		move	a1, sp
-		jal	do_IRQ
-		j	ret_from_irq
-
-ll_uart2_irq:
-		li	a0, 11
-		move	a1, sp
-		jal	do_IRQ
-		j	ret_from_irq
diff --git a/arch/mips/gt64120/momenco_ocelot/irq.c b/arch/mips/gt64120/momenco_ocelot/irq.c
index 4f108da71b23..885f67f32ea3 100644
--- a/arch/mips/gt64120/momenco_ocelot/irq.c
+++ b/arch/mips/gt64120/momenco_ocelot/irq.c
@@ -48,7 +48,38 @@
 #include <asm/mipsregs.h>
 #include <asm/system.h>
 
-extern asmlinkage void ocelot_handle_int(void);
+asmlinkage void plat_irq_dispatch(struct pt_regs *regs)
+{
+	unsigned int pending = read_c0_status() & read_c0_cause();
+
+	if (pending & STATUSF_IP2)		/* int0 hardware line */
+		do_IRQ(2, regs);
+	else if (pending & STATUSF_IP3)		/* int1 hardware line */
+		do_IRQ(3, regs);
+	else if (pending & STATUSF_IP4)		/* int2 hardware line */
+		do_IRQ(4, regs);
+	else if (pending & STATUSF_IP5)		/* int3 hardware line */
+		do_IRQ(5, regs);
+	else if (pending & STATUSF_IP6)		/* int4 hardware line */
+		do_IRQ(6, regs);
+	else if (pending & STATUSF_IP7)		/* cpu timer */
+		do_IRQ(7, regs);
+	else {
+		/*
+		 * Now look at the extended interrupts
+		 */
+		pending = (read_c0_cause() & (read_c0_intcontrol() << 8)) >> 16;
+
+		if (pending & STATUSF_IP8)		/* int6 hardware line */
+			do_IRQ(8, regs);
+		else if (pending & STATUSF_IP9)		/* int7 hardware line */
+			do_IRQ(9, regs);
+		else if (pending & STATUSF_IP10)	/* int8 hardware line */
+			do_IRQ(10, regs);
+		else if (pending & STATUSF_IP11)	/* int9 hardware line */
+			do_IRQ(11, regs);
+	}
+}
 
 void __init arch_init_irq(void)
 {
@@ -59,9 +90,6 @@ void __init arch_init_irq(void)
 	clear_c0_status(ST0_IM);
 	local_irq_disable();
 
-	/* Sets the first-level interrupt dispatcher. */
-	set_except_vector(0, ocelot_handle_int);
-
 	mips_cpu_irq_init(0);
 	rm7k_cpu_irq_init(8);
 }
diff --git a/arch/mips/ite-boards/generic/Makefile b/arch/mips/ite-boards/generic/Makefile
index 0e7853f43983..63431538d0ec 100644
--- a/arch/mips/ite-boards/generic/Makefile
+++ b/arch/mips/ite-boards/generic/Makefile
@@ -6,7 +6,7 @@
 # Makefile for the ITE 8172 (qed-4n-s01b) board, generic files.
 #
 
-obj-y			+= it8172_setup.o irq.o int-handler.o pmon_prom.o \
+obj-y			+= it8172_setup.o irq.o pmon_prom.o \
 			   time.o lpc.o puts.o reset.o
 
 obj-$(CONFIG_IT8172_CIR)+= it8172_cir.o
diff --git a/arch/mips/ite-boards/generic/dbg_io.c b/arch/mips/ite-boards/generic/dbg_io.c
index c4f8530fd07e..6a7ccaf93502 100644
--- a/arch/mips/ite-boards/generic/dbg_io.c
+++ b/arch/mips/ite-boards/generic/dbg_io.c
@@ -72,7 +72,7 @@ void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop)
 	/* disable interrupts */
 	UART16550_WRITE(OFS_INTR_ENABLE, 0);
 
-	/* set up buad rate */
+	/* set up baud rate */
 	{
 		uint32 divisor;
 
diff --git a/arch/mips/ite-boards/generic/int-handler.S b/arch/mips/ite-boards/generic/int-handler.S
deleted file mode 100644
index d190d8add9cb..000000000000
--- a/arch/mips/ite-boards/generic/int-handler.S
+++ /dev/null
@@ -1,63 +0,0 @@
-#include <asm/asm.h>
-#include <asm/mipsregs.h>
-#include <asm/regdef.h>
-#include <asm/stackframe.h>
-
-	.text
-	.set    macro
-	.set    noat
-	.align	5
-
-NESTED(it8172_IRQ, PT_SIZE, sp)
-	SAVE_ALL
-	CLI				# Important: mark KERNEL mode !
-
-        /* We're working with 'reorder' set at this point. */
-	/*
-	 * Get pending interrupts
-	 */
-
-	mfc0	t0,CP0_CAUSE		# get pending interrupts
-	mfc0	t1,CP0_STATUS		# get enabled interrupts
-	and	t0,t1			# isolate allowed ones
-
-	andi	t0,0xff00		# isolate pending bits
-        beqz    t0, 3f                  # spurious interrupt
-
-        andi    a0, t0, CAUSEF_IP7
-        beq     a0, zero, 1f
-
-        li	a0, 127			# MIPS_CPU_TIMER_IRQ = (NR_IRQS-1)
-        move    a1, sp
-        jal     ll_timer_interrupt
-	j	ret_from_irq
-        nop
-
-1:
-        andi    a0, t0, CAUSEF_IP2      # the only int we expect at this time
-        beq     a0, zero, 3f
-	move	a0,sp
-	jal	it8172_hw0_irqdispatch
-
-	mfc0	t0,CP0_STATUS		# disable interrupts
-	ori	t0,1
-	xori	t0,1
-	mtc0	t0,CP0_STATUS
-        nop
-        nop
-        nop
-
-	la      a1, ret_from_irq
-	jr	a1
-        nop
-
-3:
-	move a0, sp
-	jal	mips_spurious_interrupt
-        nop
-	la      a1, ret_from_irq
-	jr	a1
-        nop
-
-END(it8172_IRQ)
-
diff --git a/arch/mips/ite-boards/generic/irq.c b/arch/mips/ite-boards/generic/irq.c
index e67f96129491..77be7216bdd0 100644
--- a/arch/mips/ite-boards/generic/irq.c
+++ b/arch/mips/ite-boards/generic/irq.c
@@ -62,12 +62,8 @@
 
 #define ALLINTS_NOTIMER (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4)
 
-void disable_it8172_irq(unsigned int irq_nr);
-void enable_it8172_irq(unsigned int irq_nr);
-
 extern void set_debug_traps(void);
 extern void mips_timer_interrupt(int irq, struct pt_regs *regs);
-extern asmlinkage void it8172_IRQ(void);
 
 struct it8172_intc_regs volatile *it8172_hw0_icregs =
 	(struct it8172_intc_regs volatile *)(KSEG1ADDR(IT8172_PCI_IO_BASE + IT_INTC_BASE));
@@ -181,8 +177,6 @@ void __init arch_init_irq(void)
 	int i;
         unsigned long flags;
 
-        set_except_vector(0, it8172_IRQ);
-
 	/* mask all interrupts */
 	it8172_hw0_icregs->lb_mask  = 0xffff;
 	it8172_hw0_icregs->lpc_mask = 0xffff;
@@ -282,6 +276,18 @@ void it8172_hw0_irqdispatch(struct pt_regs *regs)
 	do_IRQ(irq, regs);
 }
 
+asmlinkage void plat_irq_dispatch(struct pt_regs *regs)
+{
+	unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM;
+
+	if (!pending)
+		mips_spurious_interrupt(regs);
+	else if (pending & CAUSEF_IP7)
+		ll_timer_interrupt(127, regs);
+	else if (pending & CAUSEF_IP2)
+		it8172_hw0_irqdispatch(regs);
+}
+
 void show_pending_irqs(void)
 {
 	fputs("intstatus:  ");
diff --git a/arch/mips/ite-boards/generic/time.c b/arch/mips/ite-boards/generic/time.c
index b79817bb6cce..dee497a91807 100644
--- a/arch/mips/ite-boards/generic/time.c
+++ b/arch/mips/ite-boards/generic/time.c
@@ -29,6 +29,7 @@
 #include <linux/sched.h>
 #include <linux/time.h>
 #include <linux/spinlock.h>
+#include <linux/mc146818rtc.h>
 
 #include <asm/time.h>
 #include <asm/mipsregs.h>
diff --git a/arch/mips/ite-boards/ivr/init.c b/arch/mips/ite-boards/ivr/init.c
index b774db035b31..05cf9218c432 100644
--- a/arch/mips/ite-boards/ivr/init.c
+++ b/arch/mips/ite-boards/ivr/init.c
@@ -34,13 +34,13 @@
 #include <asm/bootinfo.h>
 #include <linux/string.h>
 #include <linux/kernel.h>
+#include <asm/sections.h>
 #include <asm/it8172/it8172.h>
 #include <asm/it8172/it8172_dbg.h>
 
 int prom_argc;
 char **prom_argv, **prom_envp;
 
-extern char _end;
 extern void  __init prom_init_cmdline(void);
 extern unsigned long __init prom_get_memsize(void);
 extern void __init it8172_init_ram_resource(unsigned long memsize);
diff --git a/arch/mips/ite-boards/qed-4n-s01b/init.c b/arch/mips/ite-boards/qed-4n-s01b/init.c
index e8ec8be66a80..ea2a754cafe5 100644
--- a/arch/mips/ite-boards/qed-4n-s01b/init.c
+++ b/arch/mips/ite-boards/qed-4n-s01b/init.c
@@ -34,13 +34,13 @@
 #include <asm/bootinfo.h>
 #include <linux/string.h>
 #include <linux/kernel.h>
+#include <asm/sections.h>
 #include <asm/it8172/it8172.h>
 #include <asm/it8172/it8172_dbg.h>
 
 int prom_argc;
 char **prom_argv, **prom_envp;
 
-extern char _end;
 extern void  __init prom_init_cmdline(void);
 extern unsigned long __init prom_get_memsize(void);
 extern void __init it8172_init_ram_resource(unsigned long memsize);
diff --git a/arch/mips/jazz/Makefile b/arch/mips/jazz/Makefile
index 85749246a671..02bd39add891 100644
--- a/arch/mips/jazz/Makefile
+++ b/arch/mips/jazz/Makefile
@@ -2,6 +2,6 @@
 # Makefile for the Jazz family specific parts of the kernel
 #
 
-obj-y	 	:= int-handler.o irq.o jazzdma.o reset.o setup.o
+obj-y	 	:= irq.o jazzdma.o reset.o setup.o
 
 EXTRA_AFLAGS := $(CFLAGS)
diff --git a/arch/mips/jazz/int-handler.S b/arch/mips/jazz/int-handler.S
deleted file mode 100644
index dc752c67b528..000000000000
--- a/arch/mips/jazz/int-handler.S
+++ /dev/null
@@ -1,282 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1995, 1996, 1997, 1998 by Ralf Baechle and Andreas Busse
- *
- * Jazz family specific interrupt stuff
- *
- * To do: On Jazz machines we remap some non-ISA interrupts to ISA
- *        interrupts.  These interrupts should use their own vectors.
- *        Squeeze the last cycles out of the handlers.  Only a dead
- *        cycle is a good cycle.
- */
-#include <asm/asm.h>
-#include <asm/mipsregs.h>
-#include <asm/jazz.h>
-#include <asm/regdef.h>
-#include <asm/stackframe.h>
-
-/*
- * jazz_handle_int: Interrupt handler for the ACER Pica-61 boards
- */
-		.set	noreorder
-
-		NESTED(jazz_handle_int, PT_SIZE, ra)
-		.set	noat
-		SAVE_ALL
-		CLI
-		.set	at
-
-		/*
-		 * Get pending interrupts
-		 */
-		mfc0	t0,CP0_CAUSE		# get pending interrupts
-		mfc0	t1,CP0_STATUS		# get enabled interrupts
-		and	t0,t1			# isolate allowed ones
-		andi	t0,0xff00		# isolate pending bits
-		beqz	t0,3f
-		sll	t0,16			# delay slot
-
-		/*
-		 * Find irq with highest priority
-		 * FIXME: This is slow - use binary search
-		 */
-		la	t1,ll_vectors
-1:		bltz	t0,2f			# found pending irq
-		sll	t0,1
-		b	1b
-		subu	t1,PTRSIZE		# delay slot
-
-		/*
-		 * Do the low-level stuff
-		 */
-2:		lw	t0,(t1)
-		jr	t0
-		nop				# delay slot
-		END(jazz_handle_int)
-
-ll_sw0:		li	s1,~IE_SW0
-		mfc0	t0,CP0_CAUSE
-		and	t0,s1
-		mtc0	t0,CP0_CAUSE
-		PANIC("Unimplemented sw0 handler")
-
-ll_sw1:		li	s1,~IE_SW1
-		mfc0	t0,CP0_CAUSE
-		and	t0,s1
-		mtc0	t0,CP0_CAUSE
-		PANIC("Unimplemented sw1 handler")
-
-ll_local_dma:	li	s1,~IE_IRQ0
-		PANIC("Unimplemented local_dma handler")
-
-ll_local_dev:	lbu	t0,JAZZ_IO_IRQ_SOURCE
-#if PTRSIZE == 8	/* True 64 bit kernel */
-		dsll	t0,1
-#endif
-		.set	reorder
-		LONG_L	t0,local_vector(t0)
-		jr	t0
-		.set	noreorder
-
-/*
- * The braindead PICA hardware gives us no way to distinguish if we really
- * received interrupt 7 from the (E)ISA bus or if we just received an
- * interrupt with no findable cause.  This sometimes happens with braindead
- * cards.  Oh well - for all the Jazz boxes slots are more or less just
- * whistles and bells and we're aware of the problem.
- */
-ll_isa_irq:	lw	a0, JAZZ_EISA_IRQ_ACK
-
-		jal	do_IRQ
-		 move	a1,sp
-
-		j	ret_from_irq
-		nop
-
-/*
- * Hmm...  This is not just a plain PC clone so the question is
- * which devices on Jazz machines can generate an (E)ISA NMI?
- * (Writing to nonexistent memory?)
- */
-ll_isa_nmi:	li	s1,~IE_IRQ3
-		PANIC("Unimplemented isa_nmi handler")
-
-/*
- * Timer IRQ - remapped to be more similar to an IBM compatible.
- *
- * The timer interrupt is handled specially to ensure that the jiffies
- * variable is updated at all times.  Specifically, the timer interrupt is
- * just like the complete handlers except that it is invoked with interrupts
- * disabled and should never re-enable them.  If other interrupts were
- * allowed to be processed while the timer interrupt is active, then the
- * other interrupts would have to avoid using the jiffies variable for delay
- * and interval timing operations to avoid hanging the system.
- */
-ll_timer:	lw	zero,JAZZ_TIMER_REGISTER # timer irq cleared on read
-		li	s1,~IE_IRQ4
-
-		li	a0, JAZZ_TIMER_IRQ
-		jal	do_IRQ
-		 move	a1,sp
-
-		mfc0	t0,CP0_STATUS		# disable interrupts again
-		ori	t0,1
-		xori	t0,1
-		mtc0	t0,CP0_STATUS
-
-		j	ret_from_irq
-		 nop
-
-/*
- * CPU count/compare IRQ (unused)
- */
-ll_count:	j	ret_from_irq
-		 mtc0	zero,CP0_COMPARE
-
-#if 0
-/*
- * Call the handler for the interrupt
- * (Currently unused)
- */
-call_real:	/*
-		 * temporarily disable interrupt
-		 */
-		mfc0	t2,CP0_STATUS
-		and	t2,s1
-		mtc0	t2,CP0_STATUS
-		nor	s1,zero,s1
-		jal	do_IRQ
-
-		/*
-		 * reenable interrupt
-		 */
-		mfc0	t2,CP0_STATUS
-		or	t2,s1
-		mtc0	t2,CP0_STATUS
-		j	ret_from_irq
-#endif
-
-		.data
-		PTR	ll_sw0			# SW0
-		PTR	ll_sw1			# SW1
-		PTR	ll_local_dma		# Local DMA
-		PTR	ll_local_dev		# Local devices
-		PTR	ll_isa_irq		# ISA IRQ
-		PTR	ll_isa_nmi		# ISA NMI
-		PTR	ll_timer		# Timer
-ll_vectors:	PTR	ll_count		# Count/Compare IRQ
-
-		/*
-		 * Interrupt handlers for local devices.
-		 */
-		.text
-		.set	reorder
-loc_no_irq:	PANIC("Unimplemented loc_no_irq handler")
-/*
- * Parallel port IRQ
- */
-loc_parallel:	li	s1,~JAZZ_IE_PARALLEL
-		li	a0,JAZZ_PARALLEL_IRQ
-		b	loc_call
-
-/*
- * Floppy IRQ
- */
-loc_floppy:	li	s1,~JAZZ_IE_FLOPPY
-		li	a0,JAZZ_FLOPPY_IRQ
-		b	loc_call
-
-/*
- * Sound IRQ
- */
-loc_sound:	PANIC("Unimplemented loc_sound handler")
-loc_video:	PANIC("Unimplemented loc_video handler")
-
-/*
- * Ethernet interrupt handler
- */
-loc_ethernet: 	li	s1,~JAZZ_IE_ETHERNET
-		li	a0,JAZZ_ETHERNET_IRQ
-		b	loc_call
-
-/*
- * SCSI interrupt handler
- */
-loc_scsi:	li	s1,~JAZZ_IE_SCSI
-		li	a0,JAZZ_SCSI_IRQ
-		b	loc_call
-
-/*
- * Keyboard interrupt handler
- */
-loc_keyboard:	li	s1,~JAZZ_IE_KEYBOARD
-		li	a0,JAZZ_KEYBOARD_IRQ
-		b	loc_call
-
-/*
- * Mouse interrupt handler
- */
-loc_mouse:	li	s1,~JAZZ_IE_MOUSE
-		li	a0,JAZZ_MOUSE_IRQ
-		b	loc_call
-
-/*
- * Serial port 1 IRQ
- */
-loc_serial1:	li	s1,~JAZZ_IE_SERIAL1
-		li	a0,JAZZ_SERIAL1_IRQ
-		b	loc_call
-
-/*
- * Serial port 2 IRQ
- */
-loc_serial2:	li	s1,~JAZZ_IE_SERIAL2
-		li	a0,JAZZ_SERIAL2_IRQ
-		b	loc_call
-
-/*
- * Call the interrupt handler for an interrupt generated by a
- * local device.
- */
-loc_call:	/*
-		 * Temporarily disable interrupt source
-		 */
-		lhu	t2,JAZZ_IO_IRQ_ENABLE
-		and	t2,s1
-		sh	t2,JAZZ_IO_IRQ_ENABLE
-
-		nor	s1,zero,s1
-		jal	do_IRQ
-
-		/*
-		 * Reenable interrupt
-		 */
-		lhu	t2,JAZZ_IO_IRQ_ENABLE
-		or	t2,s1
-		sh	t2,JAZZ_IO_IRQ_ENABLE
-
-		j	ret_from_irq
-
-/*
- * "Jump extender" to reach spurious_interrupt
- */
-3:		j	spurious_interrupt
-
-/*
- * Vectors for interrupts generated by local devices
- */
-		.data
-local_vector:	PTR	loc_no_irq
-		PTR	loc_parallel
-		PTR	loc_floppy
-		PTR	loc_sound
-		PTR	loc_video
-		PTR	loc_ethernet
-		PTR	loc_scsi
-		PTR	loc_keyboard
-		PTR	loc_mouse
-		PTR	loc_serial1
-		PTR	loc_serial2
diff --git a/arch/mips/jazz/irq.c b/arch/mips/jazz/irq.c
index b309b1bcf2e8..becc9accd495 100644
--- a/arch/mips/jazz/irq.c
+++ b/arch/mips/jazz/irq.c
@@ -15,8 +15,6 @@
 #include <asm/io.h>
 #include <asm/jazz.h>
 
-extern asmlinkage void jazz_handle_int(void);
-
 static DEFINE_SPINLOCK(r4030_lock);
 
 static void enable_r4030_irq(unsigned int irq)
@@ -90,10 +88,82 @@ void __init init_r4030_ints(void)
  */
 void __init arch_init_irq(void)
 {
-	set_except_vector(0, jazz_handle_int);
-
 	init_i8259_irqs();			/* Integrated i8259  */
 	init_r4030_ints();
 
 	change_c0_status(ST0_IM, IE_IRQ4 | IE_IRQ3 | IE_IRQ2 | IE_IRQ1);
 }
+
+static void loc_call(unsigned int irq, struct pt_regs *regs, unsigned int mask)
+{
+	r4030_write_reg16(JAZZ_IO_IRQ_ENABLE,
+	                  r4030_read_reg16(JAZZ_IO_IRQ_ENABLE) & mask);
+	do_IRQ(irq, regs);
+	r4030_write_reg16(JAZZ_IO_IRQ_ENABLE,
+	                  r4030_read_reg16(JAZZ_IO_IRQ_ENABLE) | mask);
+}
+
+static void ll_local_dev(struct pt_regs *regs)
+{
+	switch (r4030_read_reg32(JAZZ_IO_IRQ_SOURCE)) {
+	case 0:
+		panic("Unimplemented loc_no_irq handler");
+		break;
+	case 4:
+		loc_call(JAZZ_PARALLEL_IRQ, regs, JAZZ_IE_PARALLEL);
+		break;
+	case 8:
+		loc_call(JAZZ_PARALLEL_IRQ, regs, JAZZ_IE_FLOPPY);
+		break;
+	case 12:
+		panic("Unimplemented loc_sound handler");
+		break;
+	case 16:
+		panic("Unimplemented loc_video handler");
+		break;
+	case 20:
+		loc_call(JAZZ_ETHERNET_IRQ, regs, JAZZ_IE_ETHERNET);
+		break;
+	case 24:
+		loc_call(JAZZ_SCSI_IRQ, regs, JAZZ_IE_SCSI);
+		break;
+	case 28:
+		loc_call(JAZZ_KEYBOARD_IRQ, regs, JAZZ_IE_KEYBOARD);
+		break;
+	case 32:
+		loc_call(JAZZ_MOUSE_IRQ, regs, JAZZ_IE_MOUSE);
+		break;
+	case 36:
+		loc_call(JAZZ_SERIAL1_IRQ, regs, JAZZ_IE_SERIAL1);
+		break;
+	case 40:
+		loc_call(JAZZ_SERIAL2_IRQ, regs, JAZZ_IE_SERIAL2);
+		break;
+	}
+}
+
+asmlinkage void plat_irq_dispatch(struct pt_regs *regs)
+{
+	unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM;
+
+	if (pending & IE_IRQ5)
+		write_c0_compare(0);
+	else if (pending & IE_IRQ4) {
+		r4030_read_reg32(JAZZ_TIMER_REGISTER);
+		do_IRQ(JAZZ_TIMER_IRQ, regs);
+	} else if (pending & IE_IRQ3)
+		panic("Unimplemented ISA NMI handler");
+	else if (pending & IE_IRQ2)
+		do_IRQ(r4030_read_reg32(JAZZ_EISA_IRQ_ACK), regs);
+	else if (pending & IE_IRQ1) {
+		ll_local_dev(regs);
+	} else if (unlikely(pending & IE_IRQ0))
+		panic("Unimplemented local_dma handler");
+	else if (pending & IE_SW1) {
+		clear_c0_cause(IE_SW1);
+		panic("Unimplemented sw1 handler");
+	} else if (pending & IE_SW0) {
+		clear_c0_cause(IE_SW0);
+		panic("Unimplemented sw0 handler");
+	}
+}
diff --git a/arch/mips/jmr3927/common/rtc_ds1742.c b/arch/mips/jmr3927/common/rtc_ds1742.c
index a6bd3f4d3049..e6561345d12a 100644
--- a/arch/mips/jmr3927/common/rtc_ds1742.c
+++ b/arch/mips/jmr3927/common/rtc_ds1742.c
@@ -60,15 +60,15 @@ rtc_ds1742_get_time(void)
 	unsigned long flags;
 
 	spin_lock_irqsave(&rtc_lock, flags);
-	CMOS_WRITE(RTC_READ, RTC_CONTROL);
-	second = BCD2BIN(CMOS_READ(RTC_SECONDS) & RTC_SECONDS_MASK);
-	minute = BCD2BIN(CMOS_READ(RTC_MINUTES));
-	hour = BCD2BIN(CMOS_READ(RTC_HOURS));
-	day = BCD2BIN(CMOS_READ(RTC_DATE));
-	month = BCD2BIN(CMOS_READ(RTC_MONTH));
-	year = BCD2BIN(CMOS_READ(RTC_YEAR));
-	century = BCD2BIN(CMOS_READ(RTC_CENTURY) & RTC_CENTURY_MASK);
-	CMOS_WRITE(0, RTC_CONTROL);
+	rtc_write(RTC_READ, RTC_CONTROL);
+	second = BCD2BIN(rtc_read(RTC_SECONDS) & RTC_SECONDS_MASK);
+	minute = BCD2BIN(rtc_read(RTC_MINUTES));
+	hour = BCD2BIN(rtc_read(RTC_HOURS));
+	day = BCD2BIN(rtc_read(RTC_DATE));
+	month = BCD2BIN(rtc_read(RTC_MONTH));
+	year = BCD2BIN(rtc_read(RTC_YEAR));
+	century = BCD2BIN(rtc_read(RTC_CENTURY) & RTC_CENTURY_MASK);
+	rtc_write(0, RTC_CONTROL);
 	spin_unlock_irqrestore(&rtc_lock, flags);
 
 	year += century * 100;
@@ -87,16 +87,16 @@ rtc_ds1742_set_time(unsigned long t)
 	unsigned long flags;
 
 	spin_lock_irqsave(&rtc_lock, flags);
-	CMOS_WRITE(RTC_READ, RTC_CONTROL);
-	cmos_second = (u8)(CMOS_READ(RTC_SECONDS) & RTC_SECONDS_MASK);
-	cmos_minute = (u8)CMOS_READ(RTC_MINUTES);
-	cmos_hour = (u8)CMOS_READ(RTC_HOURS);
-	cmos_day = (u8)CMOS_READ(RTC_DATE);
-	cmos_month = (u8)CMOS_READ(RTC_MONTH);
-	cmos_year = (u8)CMOS_READ(RTC_YEAR);
-	cmos_century = CMOS_READ(RTC_CENTURY) & RTC_CENTURY_MASK;
+	rtc_write(RTC_READ, RTC_CONTROL);
+	cmos_second = (u8)(rtc_read(RTC_SECONDS) & RTC_SECONDS_MASK);
+	cmos_minute = (u8)rtc_read(RTC_MINUTES);
+	cmos_hour = (u8)rtc_read(RTC_HOURS);
+	cmos_day = (u8)rtc_read(RTC_DATE);
+	cmos_month = (u8)rtc_read(RTC_MONTH);
+	cmos_year = (u8)rtc_read(RTC_YEAR);
+	cmos_century = rtc_read(RTC_CENTURY) & RTC_CENTURY_MASK;
 
-	CMOS_WRITE(RTC_WRITE, RTC_CONTROL);
+	rtc_write(RTC_WRITE, RTC_CONTROL);
 
 	/* convert */
 	to_tm(t, &tm);
@@ -104,18 +104,18 @@ rtc_ds1742_set_time(unsigned long t)
 	/* check each field one by one */
 	year = BIN2BCD(tm.tm_year - EPOCH);
 	if (year != cmos_year) {
-		CMOS_WRITE(year,RTC_YEAR);
+		rtc_write(year,RTC_YEAR);
 	}
 
 	month = BIN2BCD(tm.tm_mon);
 	if (month != (cmos_month & 0x1f)) {
-		CMOS_WRITE((month & 0x1f) | (cmos_month & ~0x1f),RTC_MONTH);
+		rtc_write((month & 0x1f) | (cmos_month & ~0x1f),RTC_MONTH);
 	}
 
 	day = BIN2BCD(tm.tm_mday);
 	if (day != cmos_day) {
 
-		CMOS_WRITE(day, RTC_DATE);
+		rtc_write(day, RTC_DATE);
 	}
 
 	if (cmos_hour & 0x40) {
@@ -130,20 +130,20 @@ rtc_ds1742_set_time(unsigned long t)
 		/* 24 hour format */
 		hour = BIN2BCD(tm.tm_hour) & 0x3f;
 	}
-	if (hour != cmos_hour) CMOS_WRITE(hour, RTC_HOURS);
+	if (hour != cmos_hour) rtc_write(hour, RTC_HOURS);
 
 	minute = BIN2BCD(tm.tm_min);
 	if (minute !=  cmos_minute) {
-		CMOS_WRITE(minute, RTC_MINUTES);
+		rtc_write(minute, RTC_MINUTES);
 	}
 
 	second = BIN2BCD(tm.tm_sec);
 	if (second !=  cmos_second) {
-		CMOS_WRITE(second & RTC_SECONDS_MASK,RTC_SECONDS);
+		rtc_write(second & RTC_SECONDS_MASK,RTC_SECONDS);
 	}
 
 	/* RTC_CENTURY and RTC_CONTROL share same address... */
-	CMOS_WRITE(cmos_century, RTC_CONTROL);
+	rtc_write(cmos_century, RTC_CONTROL);
 	spin_unlock_irqrestore(&rtc_lock, flags);
 
 	return 0;
@@ -163,9 +163,9 @@ rtc_ds1742_init(unsigned long base)
 	rtc_mips_set_time = rtc_ds1742_set_time;
 
 	/* clear oscillator stop bit */
-	CMOS_WRITE(RTC_READ, RTC_CONTROL);
-	cmos_second = (u8)(CMOS_READ(RTC_SECONDS) & RTC_SECONDS_MASK);
-	CMOS_WRITE(RTC_WRITE, RTC_CONTROL);
-	CMOS_WRITE(cmos_second, RTC_SECONDS); /* clear msb */
-	CMOS_WRITE(0, RTC_CONTROL);
+	rtc_write(RTC_READ, RTC_CONTROL);
+	cmos_second = (u8)(rtc_read(RTC_SECONDS) & RTC_SECONDS_MASK);
+	rtc_write(RTC_WRITE, RTC_CONTROL);
+	rtc_write(cmos_second, RTC_SECONDS); /* clear msb */
+	rtc_write(0, RTC_CONTROL);
 }
diff --git a/arch/mips/jmr3927/rbhma3100/Makefile b/arch/mips/jmr3927/rbhma3100/Makefile
index 75bf418b94c0..baf5077813c1 100644
--- a/arch/mips/jmr3927/rbhma3100/Makefile
+++ b/arch/mips/jmr3927/rbhma3100/Makefile
@@ -2,7 +2,7 @@
 # Makefile for TOSHIBA JMR-TX3927 board
 #
 
-obj-y	 			+= init.o int-handler.o irq.o setup.o
+obj-y	 			+= init.o irq.o setup.o
 obj-$(CONFIG_RUNTIME_DEBUG) 	+= debug.o
 obj-$(CONFIG_KGDB)		+= kgdb_io.o
 
diff --git a/arch/mips/jmr3927/rbhma3100/int-handler.S b/arch/mips/jmr3927/rbhma3100/int-handler.S
deleted file mode 100644
index f85bbf407542..000000000000
--- a/arch/mips/jmr3927/rbhma3100/int-handler.S
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- *              ahennessy@mvista.com
- *
- * Based on arch/mips/tsdb/kernel/int-handler.S
- *
- * Copyright (C) 2000-2001 Toshiba Corporation
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <asm/asm.h>
-#include <asm/mipsregs.h>
-#include <asm/regdef.h>
-#include <asm/stackframe.h>
-#include <asm/jmr3927/jmr3927.h>
-
-	/* A lot of complication here is taken away because:
-	 *
-	 * 1) We handle one interrupt and return, sitting in a loop
-	 *    and moving across all the pending IRQ bits in the cause
-	 *    register is _NOT_ the answer, the common case is one
-	 *    pending IRQ so optimize in that direction.
-	 *
-	 * 2) We need not check against bits in the status register
-	 *    IRQ mask, that would make this routine slow as hell.
-	 *
-	 * 3) Linux only thinks in terms of all IRQs on or all IRQs
-	 *    off, nothing in between like BSD spl() brain-damage.
-	 *
-	 */
-
-/* Flush write buffer (needed?)
- * NOTE: TX39xx performs "non-blocking load", so explicitly use the target
- * register of LBU to flush immediately.
- */
-#define FLUSH_WB(tmp)	\
-	la	tmp, JMR3927_IOC_REV_ADDR; \
-	lbu	tmp, (tmp); \
-	move	tmp, zero;
-
-	.text
-	.set	noreorder
-	.set	noat
-	.align	5
-	NESTED(jmr3927_IRQ, PT_SIZE, sp)
-	SAVE_ALL
-	CLI
-	.set	at
-	jal	jmr3927_irc_irqdispatch
-	 move	a0, sp
-	FLUSH_WB(t0)
-	j	ret_from_irq
-	 nop
-	END(jmr3927_IRQ)
diff --git a/arch/mips/jmr3927/rbhma3100/irq.c b/arch/mips/jmr3927/rbhma3100/irq.c
index 2810727f1d4e..11304d1354f4 100644
--- a/arch/mips/jmr3927/rbhma3100/irq.c
+++ b/arch/mips/jmr3927/rbhma3100/irq.c
@@ -77,8 +77,6 @@ static int jmr3927_gen_iack(void)
 }
 #endif
 
-extern asmlinkage void jmr3927_IRQ(void);
-
 #define irc_dlevel	0
 #define irc_elevel	1
 
@@ -262,7 +260,7 @@ void jmr3927_spurious(struct pt_regs *regs)
 	       regs->cp0_cause, regs->cp0_epc, regs->regs[31]);
 }
 
-void jmr3927_irc_irqdispatch(struct pt_regs *regs)
+asmlinkage void plat_irq_dispatch(struct pt_regs *regs)
 {
 	int irq;
 
@@ -398,8 +396,6 @@ void __init arch_init_irq(void)
 
 	jmr3927_irq_init(NR_ISA_IRQS);
 
-	set_except_vector(0, jmr3927_IRQ);
-
 	/* setup irq space */
 	add_tb_irq_space(&jmr3927_isac_irqspace);
 	add_tb_irq_space(&jmr3927_ioc_irqspace);
diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile
index 309d54cceda3..34e8a256765c 100644
--- a/arch/mips/kernel/Makefile
+++ b/arch/mips/kernel/Makefile
@@ -34,8 +34,11 @@ obj-$(CONFIG_CPU_R6000)		+= r6000_fpu.o r4k_switch.o
 
 obj-$(CONFIG_SMP)		+= smp.o
 
-obj-$(CONFIG_MIPS_MT_SMP)	+= smp_mt.o
+obj-$(CONFIG_MIPS_MT)		+= mips-mt.o
+obj-$(CONFIG_MIPS_MT_SMTC)	+= smtc.o smtc-asm.o smtc-proc.o
+obj-$(CONFIG_MIPS_MT_SMP)	+= smp-mt.o
 
+obj-$(CONFIG_MIPS_APSP_KSPD)	+= kspd.o
 obj-$(CONFIG_MIPS_VPE_LOADER)	+= vpe.o
 obj-$(CONFIG_MIPS_VPE_APSP_API)	+= rtlx.o
 
diff --git a/arch/mips/kernel/asm-offsets.c b/arch/mips/kernel/asm-offsets.c
index ca6b03c773be..0facfaf4e950 100644
--- a/arch/mips/kernel/asm-offsets.c
+++ b/arch/mips/kernel/asm-offsets.c
@@ -69,6 +69,9 @@ void output_ptreg_defines(void)
 	offset("#define PT_BVADDR ", struct pt_regs, cp0_badvaddr);
 	offset("#define PT_STATUS ", struct pt_regs, cp0_status);
 	offset("#define PT_CAUSE  ", struct pt_regs, cp0_cause);
+#ifdef CONFIG_MIPS_MT_SMTC
+	offset("#define PT_TCSTATUS  ", struct pt_regs, cp0_tcstatus);
+#endif /* CONFIG_MIPS_MT_SMTC */
 	size("#define PT_SIZE   ", struct pt_regs);
 	linefeed;
 }
@@ -269,8 +272,8 @@ void output_sc_defines(void)
 	text("/* Linux sigcontext offsets. */");
 	offset("#define SC_REGS       ", struct sigcontext, sc_regs);
 	offset("#define SC_FPREGS     ", struct sigcontext, sc_fpregs);
-	offset("#define SC_MDHI       ", struct sigcontext, sc_hi);
-	offset("#define SC_MDLO       ", struct sigcontext, sc_lo);
+	offset("#define SC_MDHI       ", struct sigcontext, sc_mdhi);
+	offset("#define SC_MDLO       ", struct sigcontext, sc_mdlo);
 	offset("#define SC_PC         ", struct sigcontext, sc_pc);
 	offset("#define SC_FPC_CSR    ", struct sigcontext, sc_fpc_csr);
 	linefeed;
diff --git a/arch/mips/kernel/branch.c b/arch/mips/kernel/branch.c
index 374de839558d..b6232d9033cb 100644
--- a/arch/mips/kernel/branch.c
+++ b/arch/mips/kernel/branch.c
@@ -184,7 +184,7 @@ int __compute_return_epc(struct pt_regs *regs)
 		bit = (insn.i_format.rt >> 2);
 		bit += (bit != 0);
 		bit += 23;
-		switch (insn.i_format.rt) {
+		switch (insn.i_format.rt & 3) {
 		case 0:	/* bc1f */
 		case 2:	/* bc1fl */
 			if (~fcr31 & (1 << bit))
diff --git a/arch/mips/kernel/cpu-bugs64.c b/arch/mips/kernel/cpu-bugs64.c
index 47a087b6c11b..d268827c62bd 100644
--- a/arch/mips/kernel/cpu-bugs64.c
+++ b/arch/mips/kernel/cpu-bugs64.c
@@ -206,7 +206,7 @@ static inline void check_daddi(void)
 		"daddi	%0, %1, %3\n\t"
 		".set	pop"
 		: "=r" (v), "=&r" (tmp)
-		: "I" (0xffffffffffffdb9a), "I" (0x1234));
+		: "I" (0xffffffffffffdb9aUL), "I" (0x1234));
 	set_except_vector(12, handler);
 	local_irq_restore(flags);
 
@@ -224,7 +224,7 @@ static inline void check_daddi(void)
 		"dsrl	%1, %1, 1\n\t"
 		"daddi	%0, %1, %3"
 		: "=r" (v), "=&r" (tmp)
-		: "I" (0xffffffffffffdb9a), "I" (0x1234));
+		: "I" (0xffffffffffffdb9aUL), "I" (0x1234));
 	set_except_vector(12, handler);
 	local_irq_restore(flags);
 
@@ -280,7 +280,7 @@ static inline void check_daddiu(void)
 		"daddu	%1, %2\n\t"
 		".set	pop"
 		: "=&r" (v), "=&r" (w), "=&r" (tmp)
-		: "I" (0xffffffffffffdb9a), "I" (0x1234));
+		: "I" (0xffffffffffffdb9aUL), "I" (0x1234));
 
 	if (v == w) {
 		printk("no.\n");
@@ -296,7 +296,7 @@ static inline void check_daddiu(void)
 		"addiu	%1, $0, %4\n\t"
 		"daddu	%1, %2"
 		: "=&r" (v), "=&r" (w), "=&r" (tmp)
-		: "I" (0xffffffffffffdb9a), "I" (0x1234));
+		: "I" (0xffffffffffffdb9aUL), "I" (0x1234));
 
 	if (v == w) {
 		printk("yes.\n");
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index 58b3b14873cb..8c2c359a05f4 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -121,6 +121,7 @@ static inline void check_wait(void)
 	case CPU_24K:
 	case CPU_25KF:
 	case CPU_34K:
+	case CPU_74K:
  	case CPU_PR4450:
 		cpu_wait = r4k_wait;
 		printk(" available.\n");
@@ -432,6 +433,15 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c)
 		             MIPS_CPU_LLSC;
 		c->tlbsize = 64;
 		break;
+	case PRID_IMP_R14000:
+		c->cputype = CPU_R14000;
+		c->isa_level = MIPS_CPU_ISA_IV;
+		c->options = MIPS_CPU_TLB | MIPS_CPU_4K_CACHE | MIPS_CPU_4KEX |
+		             MIPS_CPU_FPU | MIPS_CPU_32FPR |
+			     MIPS_CPU_COUNTER | MIPS_CPU_WATCH |
+		             MIPS_CPU_LLSC;
+		c->tlbsize = 64;
+		break;
 	}
 }
 
@@ -593,6 +603,9 @@ static inline void cpu_probe_mips(struct cpuinfo_mips *c)
 	case PRID_IMP_34K:
 		c->cputype = CPU_34K;
 		break;
+	case PRID_IMP_74K:
+		c->cputype = CPU_74K;
+		break;
 	}
 }
 
@@ -642,7 +655,7 @@ static inline void cpu_probe_sibyte(struct cpuinfo_mips *c)
 	case PRID_IMP_SB1:
 		c->cputype = CPU_SB1;
 		/* FPU in pass1 is known to have issues. */
-		if ((c->processor_id & 0xff) < 0x20)
+		if ((c->processor_id & 0xff) < 0x02)
 			c->options &= ~(MIPS_CPU_FPU | MIPS_CPU_32FPR);
 		break;
 	case PRID_IMP_SB1A:
diff --git a/arch/mips/kernel/entry.S b/arch/mips/kernel/entry.S
index 83c87fe4ee4f..a9c6de1b9542 100644
--- a/arch/mips/kernel/entry.S
+++ b/arch/mips/kernel/entry.S
@@ -17,6 +17,9 @@
 #include <asm/isadep.h>
 #include <asm/thread_info.h>
 #include <asm/war.h>
+#ifdef CONFIG_MIPS_MT_SMTC
+#include <asm/mipsmtregs.h>
+#endif
 
 #ifdef CONFIG_PREEMPT
 	.macro	preempt_stop
@@ -75,6 +78,37 @@ FEXPORT(syscall_exit)
 	bnez	t0, syscall_exit_work
 
 FEXPORT(restore_all)			# restore full frame
+#ifdef CONFIG_MIPS_MT_SMTC
+/* Detect and execute deferred IPI "interrupts" */
+	move	a0,sp
+	jal	deferred_smtc_ipi
+/* Re-arm any temporarily masked interrupts not explicitly "acked" */
+	mfc0	v0, CP0_TCSTATUS
+	ori	v1, v0, TCSTATUS_IXMT
+	mtc0	v1, CP0_TCSTATUS
+	andi	v0, TCSTATUS_IXMT
+	ehb
+	mfc0	t0, CP0_TCCONTEXT
+	DMT	9				# dmt t1
+	jal	mips_ihb
+	mfc0	t2, CP0_STATUS
+	andi	t3, t0, 0xff00
+	or	t2, t2, t3
+	mtc0	t2, CP0_STATUS
+	ehb
+	andi	t1, t1, VPECONTROL_TE
+	beqz	t1, 1f
+	EMT
+1:
+	mfc0	v1, CP0_TCSTATUS
+	/* We set IXMT above, XOR should clear it here */
+	xori	v1, v1, TCSTATUS_IXMT
+	or	v1, v0, v1
+	mtc0	v1, CP0_TCSTATUS
+	ehb
+	xor	t0, t0, t3
+	mtc0	t0, CP0_TCCONTEXT
+#endif /* CONFIG_MIPS_MT_SMTC */
 	.set	noat
 	RESTORE_TEMP
 	RESTORE_AT
@@ -120,28 +154,17 @@ syscall_exit_work:
 	jal	do_syscall_trace
 	b	resume_userspace
 
+#if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_MIPS_MT)
+
 /*
- * Common spurious interrupt handler.
+ * MIPS32R2 Instruction Hazard Barrier - must be called
+ *
+ * For C code use the inline version named instruction_hazard().
  */
-LEAF(spurious_interrupt)
-	/*
-	 * Someone tried to fool us by sending an interrupt but we
-	 * couldn't find a cause for it.
-	 */
-	PTR_LA	t1, irq_err_count
-#ifdef CONFIG_SMP
-1:	ll      t0, (t1)
-	addiu   t0, 1
-	sc      t0, (t1)
-#if R10000_LLSC_WAR
-	beqzl	t0, 1b
-#else
-	beqz	t0, 1b
-#endif
-#else
-	lw      t0, (t1)
-	addiu   t0, 1
-	sw      t0, (t1)
-#endif
-	j	ret_from_irq
-	END(spurious_interrupt)
+LEAF(mips_ihb)
+	.set	mips32r2
+	jr.hb	ra
+	nop
+	END(mips_ihb)
+
+#endif /* CONFIG_CPU_MIPSR2 or CONFIG_MIPS_MT */
diff --git a/arch/mips/kernel/gdb-low.S b/arch/mips/kernel/gdb-low.S
index 235ad9f6bd35..5fd7a8af0c62 100644
--- a/arch/mips/kernel/gdb-low.S
+++ b/arch/mips/kernel/gdb-low.S
@@ -54,9 +54,11 @@
 		 */
 		mfc0	k0, CP0_CAUSE
 		andi	k0, k0, 0x7c
-		add	k1, k1, k0
-		PTR_L	k0, saved_vectors(k1)
-		jr	k0
+#ifdef CONFIG_64BIT
+		dsll	k0, k0, 1
+#endif
+		PTR_L	k1, saved_vectors(k0)
+		jr	k1
 		nop
 1:
 		move	k0, sp
@@ -283,11 +285,33 @@
  */
 
 3:
+#ifdef CONFIG_MIPS_MT_SMTC
+		/* Read-modify write of Status must be atomic */
+		mfc0	t2, CP0_TCSTATUS
+		ori	t1, t2, TCSTATUS_IXMT
+		mtc0	t1, CP0_TCSTATUS
+		andi	t2, t2, TCSTATUS_IXMT
+		ehb
+		DMT	9				# dmt	t1
+		jal	mips_ihb
+		nop
+#endif /* CONFIG_MIPS_MT_SMTC */
 		mfc0	t0, CP0_STATUS
 		ori	t0, 0x1f
 		xori	t0, 0x1f
 		mtc0	t0, CP0_STATUS
-
+#ifdef CONFIG_MIPS_MT_SMTC
+        	andi    t1, t1, VPECONTROL_TE
+        	beqz    t1, 9f
+		nop
+        	EMT					# emt
+9:
+		mfc0	t1, CP0_TCSTATUS
+		xori	t1, t1, TCSTATUS_IXMT
+		or	t1, t1, t2
+		mtc0	t1, CP0_TCSTATUS
+		ehb
+#endif /* CONFIG_MIPS_MT_SMTC */
 		LONG_L	v0, GDB_FR_STATUS(sp)
 		LONG_L	v1, GDB_FR_EPC(sp)
 		mtc0	v0, CP0_STATUS
diff --git a/arch/mips/kernel/gdb-stub.c b/arch/mips/kernel/gdb-stub.c
index d4f88e0af24c..6ecbdc1fefd1 100644
--- a/arch/mips/kernel/gdb-stub.c
+++ b/arch/mips/kernel/gdb-stub.c
@@ -140,6 +140,7 @@
 #include <asm/system.h>
 #include <asm/gdb-stub.h>
 #include <asm/inst.h>
+#include <asm/smp.h>
 
 /*
  * external low-level support routines
@@ -669,6 +670,64 @@ static void kgdb_wait(void *arg)
 	local_irq_restore(flags);
 }
 
+/*
+ * GDB stub needs to call kgdb_wait on all processor with interrupts
+ * disabled, so it uses it's own special variant.
+ */
+static int kgdb_smp_call_kgdb_wait(void)
+{
+#ifdef CONFIG_SMP
+	struct call_data_struct data;
+	int i, cpus = num_online_cpus() - 1;
+	int cpu = smp_processor_id();
+
+	/*
+	 * Can die spectacularly if this CPU isn't yet marked online
+	 */
+	BUG_ON(!cpu_online(cpu));
+
+	if (!cpus)
+		return 0;
+
+	if (spin_is_locked(&smp_call_lock)) {
+		/*
+		 * Some other processor is trying to make us do something
+		 * but we're not going to respond... give up
+		 */
+		return -1;
+		}
+
+	/*
+	 * We will continue here, accepting the fact that
+	 * the kernel may deadlock if another CPU attempts
+	 * to call smp_call_function now...
+	 */
+
+	data.func = kgdb_wait;
+	data.info = NULL;
+	atomic_set(&data.started, 0);
+	data.wait = 0;
+
+	spin_lock(&smp_call_lock);
+	call_data = &data;
+	mb();
+
+	/* Send a message to all other CPUs and wait for them to respond */
+	for (i = 0; i < NR_CPUS; i++)
+		if (cpu_online(i) && i != cpu)
+			core_send_ipi(i, SMP_CALL_FUNCTION);
+
+	/* Wait for response */
+	/* FIXME: lock-up detection, backtrace on lock-up */
+	while (atomic_read(&data.started) != cpus)
+		barrier();
+
+	call_data = NULL;
+	spin_unlock(&smp_call_lock);
+#endif
+
+	return 0;
+}
 
 /*
  * This function does all command processing for interfacing to gdb.  It
@@ -718,7 +777,7 @@ void handle_exception (struct gdb_regs *regs)
 	/*
 	 * force other cpus to enter kgdb
 	 */
-	smp_call_function(kgdb_wait, NULL, 0, 0);
+	kgdb_smp_call_kgdb_wait();
 
 	/*
 	 * If we're in breakpoint() increment the PC
diff --git a/arch/mips/kernel/genex.S b/arch/mips/kernel/genex.S
index 13f22d1d0e8b..ff7af369f286 100644
--- a/arch/mips/kernel/genex.S
+++ b/arch/mips/kernel/genex.S
@@ -12,6 +12,7 @@
 #include <linux/init.h>
 
 #include <asm/asm.h>
+#include <asm/asmmacro.h>
 #include <asm/cacheops.h>
 #include <asm/regdef.h>
 #include <asm/fpregdef.h>
@@ -122,6 +123,20 @@ handle_vcei:
 	.set	pop
 	END(except_vec3_r4000)
 
+	__FINIT
+
+	.align  5
+NESTED(handle_int, PT_SIZE, sp)
+	SAVE_ALL
+	CLI
+
+	PTR_LA	ra, ret_from_irq
+	move	a0, sp
+	j	plat_irq_dispatch
+	END(handle_int)
+
+	__INIT
+
 /*
  * Special interrupt vector for MIPS64 ISA & embedded MIPS processors.
  * This is a dedicated interrupt exception vector which reduces the
@@ -157,6 +172,15 @@ NESTED(except_vec_vi, 0, sp)
 	SAVE_AT
 	.set	push
 	.set	noreorder
+#ifdef CONFIG_MIPS_MT_SMTC
+	/*
+	 * To keep from blindly blocking *all* interrupts
+	 * during service by SMTC kernel, we also want to
+	 * pass the IM value to be cleared.
+	 */
+EXPORT(except_vec_vi_mori)
+	ori	a0, $0, 0
+#endif /* CONFIG_MIPS_MT_SMTC */
 EXPORT(except_vec_vi_lui)
 	lui	v0, 0		/* Patched */
 	j	except_vec_vi_handler
@@ -173,6 +197,25 @@ EXPORT(except_vec_vi_end)
 NESTED(except_vec_vi_handler, 0, sp)
 	SAVE_TEMP
 	SAVE_STATIC
+#ifdef CONFIG_MIPS_MT_SMTC
+	/*
+	 * SMTC has an interesting problem that interrupts are level-triggered,
+	 * and the CLI macro will clear EXL, potentially causing a duplicate
+	 * interrupt service invocation. So we need to clear the associated
+	 * IM bit of Status prior to doing CLI, and restore it after the
+	 * service routine has been invoked - we must assume that the
+	 * service routine will have cleared the state, and any active
+	 * level represents a new or otherwised unserviced event...
+	 */
+	mfc0	t1, CP0_STATUS
+	and	t0, a0, t1
+	mfc0	t2, CP0_TCCONTEXT
+	or	t0, t0, t2
+	mtc0	t0, CP0_TCCONTEXT
+	xor	t1, t1, t0
+	mtc0	t1, CP0_STATUS
+	ehb
+#endif /* CONFIG_MIPS_MT_SMTC */
 	CLI
 	move	a0, sp
 	jalr	v0
diff --git a/arch/mips/kernel/head.S b/arch/mips/kernel/head.S
index 2e9122a4213a..bdf6f6eff721 100644
--- a/arch/mips/kernel/head.S
+++ b/arch/mips/kernel/head.S
@@ -18,6 +18,7 @@
 #include <linux/threads.h>
 
 #include <asm/asm.h>
+#include <asm/asmmacro.h>
 #include <asm/regdef.h>
 #include <asm/page.h>
 #include <asm/mipsregs.h>
@@ -82,12 +83,33 @@
 	 */
 	.macro	setup_c0_status set clr
 	.set	push
+#ifdef CONFIG_MIPS_MT_SMTC
+	/*
+	 * For SMTC, we need to set privilege and disable interrupts only for
+	 * the current TC, using the TCStatus register.
+	 */
+	mfc0	t0, CP0_TCSTATUS
+	/* Fortunately CU 0 is in the same place in both registers */
+	/* Set TCU0, TMX, TKSU (for later inversion) and IXMT */
+	li	t1, ST0_CU0 | 0x08001c00
+	or	t0, t1
+	/* Clear TKSU, leave IXMT */
+	xori	t0, 0x00001800
+	mtc0	t0, CP0_TCSTATUS
+	ehb
+	/* We need to leave the global IE bit set, but clear EXL...*/
+	mfc0	t0, CP0_STATUS
+	or	t0, ST0_CU0 | ST0_EXL | ST0_ERL | \set | \clr
+	xor	t0, ST0_EXL | ST0_ERL | \clr
+	mtc0	t0, CP0_STATUS
+#else
 	mfc0	t0, CP0_STATUS
 	or	t0, ST0_CU0|\set|0x1f|\clr
 	xor	t0, 0x1f|\clr
 	mtc0	t0, CP0_STATUS
 	.set	noreorder
 	sll	zero,3				# ehb
+#endif
 	.set	pop
 	.endm
 
@@ -134,6 +156,24 @@ NESTED(kernel_entry, 16, sp)			# kernel entry point
 
 	ARC64_TWIDDLE_PC
 
+#ifdef CONFIG_MIPS_MT_SMTC
+	/*
+	 * In SMTC kernel, "CLI" is thread-specific, in TCStatus.
+	 * We still need to enable interrupts globally in Status,
+	 * and clear EXL/ERL.
+	 *
+	 * TCContext is used to track interrupt levels under
+	 * service in SMTC kernel. Clear for boot TC before
+	 * allowing any interrupts.
+	 */
+	mtc0	zero, CP0_TCCONTEXT
+
+	mfc0	t0, CP0_STATUS
+	ori	t0, t0, 0xff1f
+	xori	t0, t0, 0x001e
+	mtc0	t0, CP0_STATUS
+#endif /* CONFIG_MIPS_MT_SMTC */
+
 	PTR_LA		t0, __bss_start		# clear .bss
 	LONG_S		zero, (t0)
 	PTR_LA		t1, __bss_stop - LONGSIZE
@@ -166,8 +206,25 @@ NESTED(kernel_entry, 16, sp)			# kernel entry point
  * function after setting up the stack and gp registers.
  */
 NESTED(smp_bootstrap, 16, sp)
+#ifdef CONFIG_MIPS_MT_SMTC
+	/*
+	 * Read-modify-writes of Status must be atomic, and this
+	 * is one case where CLI is invoked without EXL being
+	 * necessarily set. The CLI and setup_c0_status will
+	 * in fact be redundant for all but the first TC of
+	 * each VPE being booted.
+	 */
+	DMT	10	# dmt t2 /* t0, t1 are used by CLI and setup_c0_status() */
+	jal	mips_ihb
+#endif /* CONFIG_MIPS_MT_SMTC */
 	setup_c0_status_sec
 	smp_slave_setup
+#ifdef CONFIG_MIPS_MT_SMTC
+	andi	t2, t2, VPECONTROL_TE
+	beqz	t2, 2f
+	EMT		# emt
+2:
+#endif /* CONFIG_MIPS_MT_SMTC */
 	j	start_secondary
 	END(smp_bootstrap)
 #endif /* CONFIG_SMP */
diff --git a/arch/mips/kernel/i8259.c b/arch/mips/kernel/i8259.c
index b974ac9057f6..2125ba5f1d9b 100644
--- a/arch/mips/kernel/i8259.c
+++ b/arch/mips/kernel/i8259.c
@@ -187,6 +187,10 @@ handle_real_irq:
 		outb(cached_21,0x21);
 		outb(0x60+irq,0x20);	/* 'Specific EOI' to master */
 	}
+#ifdef CONFIG_MIPS_MT_SMTC
+        if (irq_hwmask[irq] & ST0_IM)
+        	set_c0_status(irq_hwmask[irq] & ST0_IM);
+#endif /* CONFIG_MIPS_MT_SMTC */
 	spin_unlock_irqrestore(&i8259A_lock, flags);
 	return;
 
diff --git a/arch/mips/kernel/irq-msc01.c b/arch/mips/kernel/irq-msc01.c
index 3f653c7cfbf3..97ebdc754b9e 100644
--- a/arch/mips/kernel/irq-msc01.c
+++ b/arch/mips/kernel/irq-msc01.c
@@ -76,6 +76,11 @@ static void level_mask_and_ack_msc_irq(unsigned int irq)
 	mask_msc_irq(irq);
 	if (!cpu_has_veic)
 		MSCIC_WRITE(MSC01_IC_EOI, 0);
+#ifdef CONFIG_MIPS_MT_SMTC
+	/* This actually needs to be a call into platform code */
+	if (irq_hwmask[irq] & ST0_IM)
+		set_c0_status(irq_hwmask[irq] & ST0_IM);
+#endif /* CONFIG_MIPS_MT_SMTC */
 }
 
 /*
@@ -92,6 +97,10 @@ static void edge_mask_and_ack_msc_irq(unsigned int irq)
 		MSCIC_WRITE(MSC01_IC_SUP+irq*8, r | ~MSC01_IC_SUP_EDGE_BIT);
 		MSCIC_WRITE(MSC01_IC_SUP+irq*8, r);
 	}
+#ifdef CONFIG_MIPS_MT_SMTC
+	if (irq_hwmask[irq] & ST0_IM)
+		set_c0_status(irq_hwmask[irq] & ST0_IM);
+#endif /* CONFIG_MIPS_MT_SMTC */
 }
 
 /*
diff --git a/arch/mips/kernel/irq.c b/arch/mips/kernel/irq.c
index 3dd76b3d2967..3dce742e716f 100644
--- a/arch/mips/kernel/irq.c
+++ b/arch/mips/kernel/irq.c
@@ -38,6 +38,15 @@ void ack_bad_irq(unsigned int irq)
 
 atomic_t irq_err_count;
 
+#ifdef CONFIG_MIPS_MT_SMTC
+/*
+ * SMTC Kernel needs to manipulate low-level CPU interrupt mask
+ * in do_IRQ. These are passed in setup_irq_smtc() and stored
+ * in this table.
+ */
+unsigned long irq_hwmask[NR_IRQS];
+#endif /* CONFIG_MIPS_MT_SMTC */
+
 #undef do_IRQ
 
 /*
@@ -49,6 +58,7 @@ asmlinkage unsigned int do_IRQ(unsigned int irq, struct pt_regs *regs)
 {
 	irq_enter();
 
+	__DO_IRQ_SMTC_HOOK();
 	__do_IRQ(irq, regs);
 
 	irq_exit();
@@ -101,6 +111,11 @@ skip:
 	return 0;
 }
 
+asmlinkage void spurious_interrupt(struct pt_regs *regs)
+{
+	atomic_inc(&irq_err_count);
+}
+
 #ifdef CONFIG_KGDB
 extern void breakpoint(void);
 extern void set_debug_traps(void);
@@ -124,6 +139,9 @@ void __init init_IRQ(void)
 		irq_desc[i].depth   = 1;
 		irq_desc[i].handler = &no_irq_type;
 		spin_lock_init(&irq_desc[i].lock);
+#ifdef CONFIG_MIPS_MT_SMTC
+		irq_hwmask[i] = 0;
+#endif /* CONFIG_MIPS_MT_SMTC */
 	}
 
 	arch_init_irq();
diff --git a/arch/mips/kernel/kspd.c b/arch/mips/kernel/kspd.c
new file mode 100644
index 000000000000..f06a144c7881
--- /dev/null
+++ b/arch/mips/kernel/kspd.c
@@ -0,0 +1,398 @@
+/*
+ * Copyright (C) 2005 MIPS Technologies, Inc.  All rights reserved.
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/unistd.h>
+#include <linux/file.h>
+#include <linux/fs.h>
+#include <linux/syscalls.h>
+#include <linux/workqueue.h>
+#include <linux/errno.h>
+#include <linux/list.h>
+
+#include <asm/vpe.h>
+#include <asm/rtlx.h>
+#include <asm/kspd.h>
+
+static struct workqueue_struct *workqueue = NULL;
+static struct work_struct work;
+
+extern unsigned long cpu_khz;
+
+struct mtsp_syscall {
+	int cmd;
+	unsigned char abi;
+	unsigned char size;
+};
+
+struct mtsp_syscall_ret {
+	int retval;
+	int errno;
+};
+
+struct mtsp_syscall_generic {
+	int arg0;
+	int arg1;
+	int arg2;
+	int arg3;
+	int arg4;
+	int arg5;
+	int arg6;
+};
+
+static struct list_head kspd_notifylist;
+static int sp_stopping = 0;
+
+/* these should match with those in the SDE kit */
+#define MTSP_SYSCALL_BASE	0
+#define MTSP_SYSCALL_EXIT	(MTSP_SYSCALL_BASE + 0)
+#define MTSP_SYSCALL_OPEN	(MTSP_SYSCALL_BASE + 1)
+#define MTSP_SYSCALL_READ	(MTSP_SYSCALL_BASE + 2)
+#define MTSP_SYSCALL_WRITE	(MTSP_SYSCALL_BASE + 3)
+#define MTSP_SYSCALL_CLOSE	(MTSP_SYSCALL_BASE + 4)
+#define MTSP_SYSCALL_LSEEK32	(MTSP_SYSCALL_BASE + 5)
+#define MTSP_SYSCALL_ISATTY	(MTSP_SYSCALL_BASE + 6)
+#define MTSP_SYSCALL_GETTIME	(MTSP_SYSCALL_BASE + 7)
+#define MTSP_SYSCALL_PIPEFREQ	(MTSP_SYSCALL_BASE + 8)
+#define MTSP_SYSCALL_GETTOD	(MTSP_SYSCALL_BASE + 9)
+
+#define MTSP_O_RDONLY		0x0000
+#define MTSP_O_WRONLY		0x0001
+#define MTSP_O_RDWR		0x0002
+#define MTSP_O_NONBLOCK		0x0004
+#define MTSP_O_APPEND		0x0008
+#define MTSP_O_SHLOCK		0x0010
+#define MTSP_O_EXLOCK		0x0020
+#define MTSP_O_ASYNC		0x0040
+#define MTSP_O_FSYNC		O_SYNC
+#define MTSP_O_NOFOLLOW		0x0100
+#define MTSP_O_SYNC		0x0080
+#define MTSP_O_CREAT		0x0200
+#define MTSP_O_TRUNC		0x0400
+#define MTSP_O_EXCL		0x0800
+#define MTSP_O_BINARY		0x8000
+
+#define SP_VPE 1
+
+struct apsp_table  {
+	int sp;
+	int ap;
+};
+
+/* we might want to do the mode flags too */
+struct apsp_table open_flags_table[] = {
+	{ MTSP_O_RDWR, O_RDWR },
+	{ MTSP_O_WRONLY, O_WRONLY },
+	{ MTSP_O_CREAT, O_CREAT },
+	{ MTSP_O_TRUNC, O_TRUNC },
+	{ MTSP_O_NONBLOCK, O_NONBLOCK },
+	{ MTSP_O_APPEND, O_APPEND },
+	{ MTSP_O_NOFOLLOW, O_NOFOLLOW }
+};
+
+struct apsp_table syscall_command_table[] = {
+	{ MTSP_SYSCALL_OPEN, __NR_open },
+	{ MTSP_SYSCALL_CLOSE, __NR_close },
+	{ MTSP_SYSCALL_READ, __NR_read },
+	{ MTSP_SYSCALL_WRITE, __NR_write },
+	{ MTSP_SYSCALL_LSEEK32, __NR_lseek }
+};
+
+static int sp_syscall(int num, int arg0, int arg1, int arg2, int arg3)
+{
+	register long int _num  __asm__ ("$2") = num;
+	register long int _arg0  __asm__ ("$4") = arg0;
+	register long int _arg1  __asm__ ("$5") = arg1;
+	register long int _arg2  __asm__ ("$6") = arg2;
+	register long int _arg3  __asm__ ("$7") = arg3;
+
+	mm_segment_t old_fs;
+
+	old_fs = get_fs();
+ 	set_fs(KERNEL_DS);
+
+  	__asm__ __volatile__ (
+ 	"	syscall					\n"
+ 	: "=r" (_num), "=r" (_arg3)
+ 	: "r" (_num), "r" (_arg0), "r" (_arg1), "r" (_arg2), "r" (_arg3));
+
+	set_fs(old_fs);
+
+	/* $a3 is error flag */
+	if (_arg3)
+		return -_num;
+
+	return _num;
+}
+
+static int translate_syscall_command(int cmd)
+{
+	int i;
+	int ret = -1;
+
+	for (i = 0; i < ARRAY_SIZE(syscall_command_table); i++) {
+		if ((cmd == syscall_command_table[i].sp))
+			return syscall_command_table[i].ap;
+	}
+
+	return ret;
+}
+
+static unsigned int translate_open_flags(int flags)
+{
+	int i;
+	unsigned int ret = 0;
+
+	for (i = 0; i < (sizeof(open_flags_table) / sizeof(struct apsp_table));
+	     i++) {
+		if( (flags & open_flags_table[i].sp) ) {
+			ret |= open_flags_table[i].ap;
+		}
+	}
+
+	return ret;
+}
+
+
+static void sp_setfsuidgid( uid_t uid, gid_t gid)
+{
+	current->fsuid = uid;
+	current->fsgid = gid;
+
+	key_fsuid_changed(current);
+	key_fsgid_changed(current);
+}
+
+/*
+ * Expects a request to be on the sysio channel. Reads it.  Decides whether
+ * its a linux syscall and runs it, or whatever.  Puts the return code back
+ * into the request and sends the whole thing back.
+ */
+void sp_work_handle_request(void)
+{
+	struct mtsp_syscall sc;
+	struct mtsp_syscall_generic generic;
+	struct mtsp_syscall_ret ret;
+	struct kspd_notifications *n;
+	struct timeval tv;
+	struct timezone tz;
+	int cmd;
+
+	char *vcwd;
+	mm_segment_t old_fs;
+	int size;
+
+	ret.retval = -1;
+
+	if (!rtlx_read(RTLX_CHANNEL_SYSIO, &sc, sizeof(struct mtsp_syscall), 0)) {
+		printk(KERN_ERR "Expected request but nothing to read\n");
+		return;
+	}
+
+	size = sc.size;
+
+	if (size) {
+		if (!rtlx_read(RTLX_CHANNEL_SYSIO, &generic, size, 0)) {
+			printk(KERN_ERR "Expected request but nothing to read\n");
+			return;
+		}
+	}
+
+	/* Run the syscall at the priviledge of the user who loaded the
+	   SP program */
+
+	if (vpe_getuid(SP_VPE))
+		sp_setfsuidgid( vpe_getuid(SP_VPE), vpe_getgid(SP_VPE));
+
+	switch (sc.cmd) {
+	/* needs the flags argument translating from SDE kit to
+	   linux */
+ 	case MTSP_SYSCALL_PIPEFREQ:
+ 		ret.retval = cpu_khz * 1000;
+ 		ret.errno = 0;
+ 		break;
+
+ 	case MTSP_SYSCALL_GETTOD:
+ 		memset(&tz, 0, sizeof(tz));
+ 		if ((ret.retval = sp_syscall(__NR_gettimeofday, (int)&tv,
+ 		                             (int)&tz, 0,0)) == 0)
+		ret.retval = tv.tv_sec;
+
+		ret.errno = errno;
+		break;
+
+ 	case MTSP_SYSCALL_EXIT:
+		list_for_each_entry(n, &kspd_notifylist, list)
+ 			n->kspd_sp_exit(SP_VPE);
+		sp_stopping = 1;
+
+		printk(KERN_DEBUG "KSPD got exit syscall from SP exitcode %d\n",
+		       generic.arg0);
+ 		break;
+
+ 	case MTSP_SYSCALL_OPEN:
+ 		generic.arg1 = translate_open_flags(generic.arg1);
+
+ 		vcwd = vpe_getcwd(SP_VPE);
+
+ 		/* change to the cwd of the process that loaded the SP program */
+		old_fs = get_fs();
+		set_fs(KERNEL_DS);
+		sys_chdir(vcwd);
+		set_fs(old_fs);
+
+ 		sc.cmd = __NR_open;
+
+		/* fall through */
+
+  	default:
+ 		if ((sc.cmd >= __NR_Linux) &&
+		    (sc.cmd <= (__NR_Linux +  __NR_Linux_syscalls)) )
+			cmd = sc.cmd;
+		else
+			cmd = translate_syscall_command(sc.cmd);
+
+		if (cmd >= 0) {
+			ret.retval = sp_syscall(cmd, generic.arg0, generic.arg1,
+			                        generic.arg2, generic.arg3);
+			ret.errno = errno;
+		} else
+ 			printk(KERN_WARNING
+			       "KSPD: Unknown SP syscall number %d\n", sc.cmd);
+		break;
+ 	} /* switch */
+
+	if (vpe_getuid(SP_VPE))
+		sp_setfsuidgid( 0, 0);
+
+	if ((rtlx_write(RTLX_CHANNEL_SYSIO, &ret, sizeof(struct mtsp_syscall_ret), 0))
+	    < sizeof(struct mtsp_syscall_ret))
+		printk("KSPD: sp_work_handle_request failed to send to SP\n");
+}
+
+static void sp_cleanup(void)
+{
+	struct files_struct *files = current->files;
+	int i, j;
+	struct fdtable *fdt;
+
+	j = 0;
+
+	/*
+	 * It is safe to dereference the fd table without RCU or
+	 * ->file_lock
+	 */
+	fdt = files_fdtable(files);
+	for (;;) {
+		unsigned long set;
+		i = j * __NFDBITS;
+		if (i >= fdt->max_fdset || i >= fdt->max_fds)
+			break;
+		set = fdt->open_fds->fds_bits[j++];
+		while (set) {
+			if (set & 1) {
+				struct file * file = xchg(&fdt->fd[i], NULL);
+				if (file)
+					filp_close(file, files);
+			}
+			i++;
+			set >>= 1;
+		}
+	}
+}
+
+static int channel_open = 0;
+
+/* the work handler */
+static void sp_work(void *data)
+{
+	if (!channel_open) {
+		if( rtlx_open(RTLX_CHANNEL_SYSIO, 1) != 0) {
+			printk("KSPD: unable to open sp channel\n");
+			sp_stopping = 1;
+		} else {
+			channel_open++;
+			printk(KERN_DEBUG "KSPD: SP channel opened\n");
+		}
+	} else {
+		/* wait for some data, allow it to sleep */
+		rtlx_read_poll(RTLX_CHANNEL_SYSIO, 1);
+
+		/* Check we haven't been woken because we are stopping */
+		if (!sp_stopping)
+			sp_work_handle_request();
+	}
+
+	if (!sp_stopping)
+		queue_work(workqueue, &work);
+	else
+		sp_cleanup();
+}
+
+static void startwork(int vpe)
+{
+	sp_stopping = channel_open = 0;
+
+	if (workqueue == NULL) {
+		if ((workqueue = create_singlethread_workqueue("kspd")) == NULL) {
+			printk(KERN_ERR "unable to start kspd\n");
+			return;
+		}
+
+		INIT_WORK(&work, sp_work, NULL);
+		queue_work(workqueue, &work);
+	} else
+		queue_work(workqueue, &work);
+
+}
+
+static void stopwork(int vpe)
+{
+	sp_stopping = 1;
+
+	printk(KERN_DEBUG "KSPD: SP stopping\n");
+}
+
+void kspd_notify(struct kspd_notifications *notify)
+{
+	list_add(&notify->list, &kspd_notifylist);
+}
+
+static struct vpe_notifications notify;
+static int kspd_module_init(void)
+{
+	INIT_LIST_HEAD(&kspd_notifylist);
+
+	notify.start = startwork;
+	notify.stop = stopwork;
+	vpe_notify(SP_VPE, &notify);
+
+	return 0;
+}
+
+static void kspd_module_exit(void)
+{
+
+}
+
+module_init(kspd_module_init);
+module_exit(kspd_module_exit);
+
+MODULE_DESCRIPTION("MIPS KSPD");
+MODULE_AUTHOR("Elizabeth Oldham, MIPS Technologies, Inc.");
+MODULE_LICENSE("GPL");
diff --git a/arch/mips/kernel/linux32.c b/arch/mips/kernel/linux32.c
index 3f40c37a9ee6..a7d2bb3cf835 100644
--- a/arch/mips/kernel/linux32.c
+++ b/arch/mips/kernel/linux32.c
@@ -356,73 +356,13 @@ asmlinkage int sys32_llseek(unsigned int fd, unsigned int offset_high,
 asmlinkage ssize_t sys32_pread(unsigned int fd, char __user * buf,
 			       size_t count, u32 unused, u64 a4, u64 a5)
 {
-	ssize_t ret;
-	struct file * file;
-	ssize_t (*read)(struct file *, char __user *, size_t, loff_t *);
-	loff_t pos;
-
-	ret = -EBADF;
-	file = fget(fd);
-	if (!file)
-		goto bad_file;
-	if (!(file->f_mode & FMODE_READ))
-		goto out;
-	pos = merge_64(a4, a5);
-	ret = rw_verify_area(READ, file, &pos, count);
-	if (ret < 0)
-		goto out;
-	ret = -EINVAL;
-	if (!file->f_op || !(read = file->f_op->read))
-		goto out;
-	if (pos < 0)
-		goto out;
-	ret = -ESPIPE;
-	if (!(file->f_mode & FMODE_PREAD))
-		goto out;
-	ret = read(file, buf, count, &pos);
-	if (ret > 0)
-		dnotify_parent(file->f_dentry, DN_ACCESS);
-out:
-	fput(file);
-bad_file:
-	return ret;
+	return sys_pread64(fd, buf, count, merge_64(a4, a5));
 }
 
 asmlinkage ssize_t sys32_pwrite(unsigned int fd, const char __user * buf,
 			        size_t count, u32 unused, u64 a4, u64 a5)
 {
-	ssize_t ret;
-	struct file * file;
-	ssize_t (*write)(struct file *, const char __user *, size_t, loff_t *);
-	loff_t pos;
-
-	ret = -EBADF;
-	file = fget(fd);
-	if (!file)
-		goto bad_file;
-	if (!(file->f_mode & FMODE_WRITE))
-		goto out;
-	pos = merge_64(a4, a5);
-	ret = rw_verify_area(WRITE, file, &pos, count);
-	if (ret < 0)
-		goto out;
-	ret = -EINVAL;
-	if (!file->f_op || !(write = file->f_op->write))
-		goto out;
-	if (pos < 0)
-		goto out;
-
-	ret = -ESPIPE;
-	if (!(file->f_mode & FMODE_PWRITE))
-		goto out;
-
-	ret = write(file, buf, count, &pos);
-	if (ret > 0)
-		dnotify_parent(file->f_dentry, DN_MODIFY);
-out:
-	fput(file);
-bad_file:
-	return ret;
+	return sys_pwrite64(fd, buf, count, merge_64(a4, a5));
 }
 
 asmlinkage int sys32_sched_rr_get_interval(compat_pid_t pid,
@@ -1182,6 +1122,16 @@ asmlinkage ssize_t sys32_readahead(int fd, u32 pad0, u64 a2, u64 a3,
 	return sys_readahead(fd, merge_64(a2, a3), count);
 }
 
+asmlinkage long sys32_sync_file_range(int fd, int __pad,
+	unsigned long a2, unsigned long a3,
+	unsigned long a4, unsigned long a5,
+	int flags)
+{
+	return sys_sync_file_range(fd,
+			merge_64(a2, a3), merge_64(a4, a5),
+			flags);
+}
+
 /* Argument list sizes for sys_socketcall */
 #define AL(x) ((x) * sizeof(unsigned int))
 static unsigned char socketcall_nargs[18]={AL(0),AL(3),AL(3),AL(3),AL(2),AL(3),
diff --git a/arch/mips/kernel/mips-mt.c b/arch/mips/kernel/mips-mt.c
new file mode 100644
index 000000000000..02237a685ec7
--- /dev/null
+++ b/arch/mips/kernel/mips-mt.c
@@ -0,0 +1,449 @@
+/*
+ * General MIPS MT support routines, usable in AP/SP, SMVP, or SMTC kernels
+ * Copyright (C) 2005 Mips Technologies, Inc
+ */
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/cpumask.h>
+#include <linux/interrupt.h>
+
+#include <asm/cpu.h>
+#include <asm/processor.h>
+#include <asm/atomic.h>
+#include <asm/system.h>
+#include <asm/hardirq.h>
+#include <asm/mmu_context.h>
+#include <asm/smp.h>
+#include <asm/mipsmtregs.h>
+#include <asm/r4kcache.h>
+#include <asm/cacheflush.h>
+
+/*
+ * CPU mask used to set process affinity for MT VPEs/TCs with FPUs
+ */
+
+cpumask_t mt_fpu_cpumask;
+
+#ifdef CONFIG_MIPS_MT_FPAFF
+
+#include <linux/cpu.h>
+#include <linux/delay.h>
+#include <asm/uaccess.h>
+
+unsigned long mt_fpemul_threshold = 0;
+
+/*
+ * Replacement functions for the sys_sched_setaffinity() and
+ * sys_sched_getaffinity() system calls, so that we can integrate
+ * FPU affinity with the user's requested processor affinity.
+ * This code is 98% identical with the sys_sched_setaffinity()
+ * and sys_sched_getaffinity() system calls, and should be
+ * updated when kernel/sched.c changes.
+ */
+
+/*
+ * find_process_by_pid - find a process with a matching PID value.
+ * used in sys_sched_set/getaffinity() in kernel/sched.c, so
+ * cloned here.
+ */
+static inline task_t *find_process_by_pid(pid_t pid)
+{
+	return pid ? find_task_by_pid(pid) : current;
+}
+
+
+/*
+ * mipsmt_sys_sched_setaffinity - set the cpu affinity of a process
+ */
+asmlinkage long mipsmt_sys_sched_setaffinity(pid_t pid, unsigned int len,
+				      unsigned long __user *user_mask_ptr)
+{
+	cpumask_t new_mask;
+	cpumask_t effective_mask;
+	int retval;
+	task_t *p;
+
+	if (len < sizeof(new_mask))
+		return -EINVAL;
+
+	if (copy_from_user(&new_mask, user_mask_ptr, sizeof(new_mask)))
+		return -EFAULT;
+
+	lock_cpu_hotplug();
+	read_lock(&tasklist_lock);
+
+	p = find_process_by_pid(pid);
+	if (!p) {
+		read_unlock(&tasklist_lock);
+		unlock_cpu_hotplug();
+		return -ESRCH;
+	}
+
+	/*
+	 * It is not safe to call set_cpus_allowed with the
+	 * tasklist_lock held.  We will bump the task_struct's
+	 * usage count and drop tasklist_lock before invoking
+	 * set_cpus_allowed.
+	 */
+	get_task_struct(p);
+
+	retval = -EPERM;
+	if ((current->euid != p->euid) && (current->euid != p->uid) &&
+			!capable(CAP_SYS_NICE)) {
+		read_unlock(&tasklist_lock);
+		goto out_unlock;
+	}
+
+	/* Record new user-specified CPU set for future reference */
+	p->thread.user_cpus_allowed = new_mask;
+
+	/* Unlock the task list */
+	read_unlock(&tasklist_lock);
+
+	/* Compute new global allowed CPU set if necessary */
+	if( (p->thread.mflags & MF_FPUBOUND)
+	&& cpus_intersects(new_mask, mt_fpu_cpumask)) {
+		cpus_and(effective_mask, new_mask, mt_fpu_cpumask);
+		retval = set_cpus_allowed(p, effective_mask);
+	} else {
+		p->thread.mflags &= ~MF_FPUBOUND;
+		retval = set_cpus_allowed(p, new_mask);
+	}
+
+
+out_unlock:
+	put_task_struct(p);
+	unlock_cpu_hotplug();
+	return retval;
+}
+
+/*
+ * mipsmt_sys_sched_getaffinity - get the cpu affinity of a process
+ */
+asmlinkage long mipsmt_sys_sched_getaffinity(pid_t pid, unsigned int len,
+				      unsigned long __user *user_mask_ptr)
+{
+	unsigned int real_len;
+	cpumask_t mask;
+	int retval;
+	task_t *p;
+
+	real_len = sizeof(mask);
+	if (len < real_len)
+		return -EINVAL;
+
+	lock_cpu_hotplug();
+	read_lock(&tasklist_lock);
+
+	retval = -ESRCH;
+	p = find_process_by_pid(pid);
+	if (!p)
+		goto out_unlock;
+
+	retval = 0;
+
+	cpus_and(mask, p->thread.user_cpus_allowed, cpu_possible_map);
+
+out_unlock:
+	read_unlock(&tasklist_lock);
+	unlock_cpu_hotplug();
+	if (retval)
+		return retval;
+	if (copy_to_user(user_mask_ptr, &mask, real_len))
+		return -EFAULT;
+	return real_len;
+}
+
+#endif /* CONFIG_MIPS_MT_FPAFF */
+
+/*
+ * Dump new MIPS MT state for the core. Does not leave TCs halted.
+ * Takes an argument which taken to be a pre-call MVPControl value.
+ */
+
+void mips_mt_regdump(unsigned long mvpctl)
+{
+	unsigned long flags;
+	unsigned long vpflags;
+	unsigned long mvpconf0;
+	int nvpe;
+	int ntc;
+	int i;
+	int tc;
+	unsigned long haltval;
+	unsigned long tcstatval;
+#ifdef CONFIG_MIPS_MT_SMTC
+	void smtc_soft_dump(void);
+#endif /* CONFIG_MIPT_MT_SMTC */
+
+	local_irq_save(flags);
+	vpflags = dvpe();
+	printk("=== MIPS MT State Dump ===\n");
+	printk("-- Global State --\n");
+	printk("   MVPControl Passed: %08lx\n", mvpctl);
+	printk("   MVPControl Read: %08lx\n", vpflags);
+	printk("   MVPConf0 : %08lx\n", (mvpconf0 = read_c0_mvpconf0()));
+	nvpe = ((mvpconf0 & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT) + 1;
+	ntc = ((mvpconf0 & MVPCONF0_PTC) >> MVPCONF0_PTC_SHIFT) + 1;
+	printk("-- per-VPE State --\n");
+	for(i = 0; i < nvpe; i++) {
+	    for(tc = 0; tc < ntc; tc++) {
+			settc(tc);
+		if((read_tc_c0_tcbind() & TCBIND_CURVPE) == i) {
+		    printk("  VPE %d\n", i);
+		    printk("   VPEControl : %08lx\n", read_vpe_c0_vpecontrol());
+		    printk("   VPEConf0 : %08lx\n", read_vpe_c0_vpeconf0());
+		    printk("   VPE%d.Status : %08lx\n",
+				i, read_vpe_c0_status());
+		    printk("   VPE%d.EPC : %08lx\n", i, read_vpe_c0_epc());
+		    printk("   VPE%d.Cause : %08lx\n", i, read_vpe_c0_cause());
+		    printk("   VPE%d.Config7 : %08lx\n",
+				i, read_vpe_c0_config7());
+		    break; /* Next VPE */
+		}
+	    }
+	}
+	printk("-- per-TC State --\n");
+	for(tc = 0; tc < ntc; tc++) {
+		settc(tc);
+		if(read_tc_c0_tcbind() == read_c0_tcbind()) {
+			/* Are we dumping ourself?  */
+			haltval = 0; /* Then we're not halted, and mustn't be */
+			tcstatval = flags; /* And pre-dump TCStatus is flags */
+			printk("  TC %d (current TC with VPE EPC above)\n", tc);
+		} else {
+			haltval = read_tc_c0_tchalt();
+			write_tc_c0_tchalt(1);
+			tcstatval = read_tc_c0_tcstatus();
+			printk("  TC %d\n", tc);
+		}
+		printk("   TCStatus : %08lx\n", tcstatval);
+		printk("   TCBind : %08lx\n", read_tc_c0_tcbind());
+		printk("   TCRestart : %08lx\n", read_tc_c0_tcrestart());
+		printk("   TCHalt : %08lx\n", haltval);
+		printk("   TCContext : %08lx\n", read_tc_c0_tccontext());
+		if (!haltval)
+			write_tc_c0_tchalt(0);
+	}
+#ifdef CONFIG_MIPS_MT_SMTC
+	smtc_soft_dump();
+#endif /* CONFIG_MIPT_MT_SMTC */
+	printk("===========================\n");
+	evpe(vpflags);
+	local_irq_restore(flags);
+}
+
+static int mt_opt_norps = 0;
+static int mt_opt_rpsctl = -1;
+static int mt_opt_nblsu = -1;
+static int mt_opt_forceconfig7 = 0;
+static int mt_opt_config7 = -1;
+
+static int __init rps_disable(char *s)
+{
+	mt_opt_norps = 1;
+	return 1;
+}
+__setup("norps", rps_disable);
+
+static int __init rpsctl_set(char *str)
+{
+	get_option(&str, &mt_opt_rpsctl);
+	return 1;
+}
+__setup("rpsctl=", rpsctl_set);
+
+static int __init nblsu_set(char *str)
+{
+	get_option(&str, &mt_opt_nblsu);
+	return 1;
+}
+__setup("nblsu=", nblsu_set);
+
+static int __init config7_set(char *str)
+{
+	get_option(&str, &mt_opt_config7);
+	mt_opt_forceconfig7 = 1;
+	return 1;
+}
+__setup("config7=", config7_set);
+
+/* Experimental cache flush control parameters that should go away some day */
+int mt_protiflush = 0;
+int mt_protdflush = 0;
+int mt_n_iflushes = 1;
+int mt_n_dflushes = 1;
+
+static int __init set_protiflush(char *s)
+{
+	mt_protiflush = 1;
+	return 1;
+}
+__setup("protiflush", set_protiflush);
+
+static int __init set_protdflush(char *s)
+{
+	mt_protdflush = 1;
+	return 1;
+}
+__setup("protdflush", set_protdflush);
+
+static int __init niflush(char *s)
+{
+	get_option(&s, &mt_n_iflushes);
+	return 1;
+}
+__setup("niflush=", niflush);
+
+static int __init ndflush(char *s)
+{
+	get_option(&s, &mt_n_dflushes);
+	return 1;
+}
+__setup("ndflush=", ndflush);
+#ifdef CONFIG_MIPS_MT_FPAFF
+static int fpaff_threshold = -1;
+
+static int __init fpaff_thresh(char *str)
+{
+	get_option(&str, &fpaff_threshold);
+	return 1;
+}
+
+__setup("fpaff=", fpaff_thresh);
+#endif /* CONFIG_MIPS_MT_FPAFF */
+
+static unsigned int itc_base = 0;
+
+static int __init set_itc_base(char *str)
+{
+	get_option(&str, &itc_base);
+	return 1;
+}
+
+__setup("itcbase=", set_itc_base);
+
+void mips_mt_set_cpuoptions(void)
+{
+	unsigned int oconfig7 = read_c0_config7();
+	unsigned int nconfig7 = oconfig7;
+
+	if (mt_opt_norps) {
+		printk("\"norps\" option deprectated: use \"rpsctl=\"\n");
+	}
+	if (mt_opt_rpsctl >= 0) {
+		printk("34K return prediction stack override set to %d.\n",
+			mt_opt_rpsctl);
+		if (mt_opt_rpsctl)
+			nconfig7 |= (1 << 2);
+		else
+			nconfig7 &= ~(1 << 2);
+	}
+	if (mt_opt_nblsu >= 0) {
+		printk("34K ALU/LSU sync override set to %d.\n", mt_opt_nblsu);
+		if (mt_opt_nblsu)
+			nconfig7 |= (1 << 5);
+		else
+			nconfig7 &= ~(1 << 5);
+	}
+	if (mt_opt_forceconfig7) {
+		printk("CP0.Config7 forced to 0x%08x.\n", mt_opt_config7);
+		nconfig7 = mt_opt_config7;
+	}
+	if (oconfig7 != nconfig7) {
+		__asm__ __volatile("sync");
+		write_c0_config7(nconfig7);
+		ehb ();
+		printk("Config7: 0x%08x\n", read_c0_config7());
+	}
+
+	/* Report Cache management debug options */
+	if (mt_protiflush)
+		printk("I-cache flushes single-threaded\n");
+	if (mt_protdflush)
+		printk("D-cache flushes single-threaded\n");
+	if (mt_n_iflushes != 1)
+		printk("I-Cache Flushes Repeated %d times\n", mt_n_iflushes);
+	if (mt_n_dflushes != 1)
+		printk("D-Cache Flushes Repeated %d times\n", mt_n_dflushes);
+
+#ifdef CONFIG_MIPS_MT_FPAFF
+	/* FPU Use Factor empirically derived from experiments on 34K */
+#define FPUSEFACTOR 333
+
+	if (fpaff_threshold >= 0) {
+		mt_fpemul_threshold = fpaff_threshold;
+	} else {
+		mt_fpemul_threshold =
+			(FPUSEFACTOR * (loops_per_jiffy/(500000/HZ))) / HZ;
+	}
+	printk("FPU Affinity set after %ld emulations\n",
+			mt_fpemul_threshold);
+#endif /* CONFIG_MIPS_MT_FPAFF */
+
+	if (itc_base != 0) {
+		/*
+		 * Configure ITC mapping.  This code is very
+		 * specific to the 34K core family, which uses
+		 * a special mode bit ("ITC") in the ErrCtl
+		 * register to enable access to ITC control
+		 * registers via cache "tag" operations.
+		 */
+		unsigned long ectlval;
+		unsigned long itcblkgrn;
+
+		/* ErrCtl register is known as "ecc" to Linux */
+		ectlval = read_c0_ecc();
+		write_c0_ecc(ectlval | (0x1 << 26));
+		ehb();
+#define INDEX_0 (0x80000000)
+#define INDEX_8 (0x80000008)
+		/* Read "cache tag" for Dcache pseudo-index 8 */
+		cache_op(Index_Load_Tag_D, INDEX_8);
+		ehb();
+		itcblkgrn = read_c0_dtaglo();
+		itcblkgrn &= 0xfffe0000;
+		/* Set for 128 byte pitch of ITC cells */
+		itcblkgrn |= 0x00000c00;
+		/* Stage in Tag register */
+		write_c0_dtaglo(itcblkgrn);
+		ehb();
+		/* Write out to ITU with CACHE op */
+		cache_op(Index_Store_Tag_D, INDEX_8);
+		/* Now set base address, and turn ITC on with 0x1 bit */
+		write_c0_dtaglo((itc_base & 0xfffffc00) | 0x1 );
+		ehb();
+		/* Write out to ITU with CACHE op */
+		cache_op(Index_Store_Tag_D, INDEX_0);
+		write_c0_ecc(ectlval);
+		ehb();
+		printk("Mapped %ld ITC cells starting at 0x%08x\n",
+			((itcblkgrn & 0x7fe00000) >> 20), itc_base);
+	}
+}
+
+/*
+ * Function to protect cache flushes from concurrent execution
+ * depends on MP software model chosen.
+ */
+
+void mt_cflush_lockdown(void)
+{
+#ifdef CONFIG_MIPS_MT_SMTC
+	void smtc_cflush_lockdown(void);
+
+	smtc_cflush_lockdown();
+#endif /* CONFIG_MIPS_MT_SMTC */
+	/* FILL IN VSMP and AP/SP VERSIONS HERE */
+}
+
+void mt_cflush_release(void)
+{
+#ifdef CONFIG_MIPS_MT_SMTC
+	void smtc_cflush_release(void);
+
+	smtc_cflush_release();
+#endif /* CONFIG_MIPS_MT_SMTC */
+	/* FILL IN VSMP and AP/SP VERSIONS HERE */
+}
diff --git a/arch/mips/kernel/mips_ksyms.c b/arch/mips/kernel/mips_ksyms.c
index e042f9d2ba31..0a71a4c33716 100644
--- a/arch/mips/kernel/mips_ksyms.c
+++ b/arch/mips/kernel/mips_ksyms.c
@@ -28,21 +28,9 @@ extern long __strnlen_user_asm(const char *s);
 /*
  * String functions
  */
-EXPORT_SYMBOL(memchr);
-EXPORT_SYMBOL(memcmp);
 EXPORT_SYMBOL(memset);
 EXPORT_SYMBOL(memcpy);
 EXPORT_SYMBOL(memmove);
-EXPORT_SYMBOL(strcat);
-EXPORT_SYMBOL(strchr);
-#ifdef CONFIG_64BIT
-EXPORT_SYMBOL(strncmp);
-#endif
-EXPORT_SYMBOL(strlen);
-EXPORT_SYMBOL(strncat);
-EXPORT_SYMBOL(strnlen);
-EXPORT_SYMBOL(strrchr);
-EXPORT_SYMBOL(strstr);
 
 EXPORT_SYMBOL(kernel_thread);
 
@@ -61,6 +49,3 @@ EXPORT_SYMBOL(__strnlen_user_asm);
 EXPORT_SYMBOL(csum_partial);
 
 EXPORT_SYMBOL(invalid_pte_table);
-#ifdef CONFIG_GENERIC_IRQ_PROBE
-EXPORT_SYMBOL(probe_irq_mask);
-#endif
diff --git a/arch/mips/kernel/module.c b/arch/mips/kernel/module.c
index e54a7f442f8a..d7bf0215bc1d 100644
--- a/arch/mips/kernel/module.c
+++ b/arch/mips/kernel/module.c
@@ -288,6 +288,9 @@ int apply_relocate(Elf_Shdr *sechdrs, const char *strtab,
 		sym = (Elf_Sym *)sechdrs[symindex].sh_addr
 			+ ELF_MIPS_R_SYM(rel[i]);
 		if (!sym->st_value) {
+			/* Ignore unresolved weak symbol */
+			if (ELF_ST_BIND(sym->st_info) == STB_WEAK)
+				continue;
 			printk(KERN_WARNING "%s: Unknown symbol %s\n",
 			       me->name, strtab + sym->st_name);
 			return -ENOENT;
@@ -325,6 +328,9 @@ int apply_relocate_add(Elf_Shdr *sechdrs, const char *strtab,
 		sym = (Elf_Sym *)sechdrs[symindex].sh_addr
 			+ ELF_MIPS_R_SYM(rel[i]);
 		if (!sym->st_value) {
+			/* Ignore unresolved weak symbol */
+			if (ELF_ST_BIND(sym->st_info) == STB_WEAK)
+				continue;
 			printk(KERN_WARNING "%s: Unknown symbol %s\n",
 			       me->name, strtab + sym->st_name);
 			return -ENOENT;
diff --git a/arch/mips/kernel/proc.c b/arch/mips/kernel/proc.c
index 84ab959f924a..9def554f335b 100644
--- a/arch/mips/kernel/proc.c
+++ b/arch/mips/kernel/proc.c
@@ -42,6 +42,7 @@ static const char *cpu_name[] = {
 	[CPU_R8000]	= "R8000",
 	[CPU_R10000]	= "R10000",
 	[CPU_R12000]	= "R12000",
+	[CPU_R14000]	= "R14000",
 	[CPU_R4300]	= "R4300",
 	[CPU_R4650]	= "R4650",
 	[CPU_R4700]	= "R4700",
@@ -74,6 +75,7 @@ static const char *cpu_name[] = {
 	[CPU_24K]	= "MIPS 24K",
 	[CPU_25KF]	= "MIPS 25Kf",
 	[CPU_34K]	= "MIPS 34K",
+	[CPU_74K]	= "MIPS 74K",
 	[CPU_VR4111]	= "NEC VR4111",
 	[CPU_VR4121]	= "NEC VR4121",
 	[CPU_VR4122]	= "NEC VR4122",
diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c
index c66db5e5ab62..199a06e873c6 100644
--- a/arch/mips/kernel/process.c
+++ b/arch/mips/kernel/process.c
@@ -41,6 +41,10 @@
 #include <asm/elf.h>
 #include <asm/isadep.h>
 #include <asm/inst.h>
+#ifdef CONFIG_MIPS_MT_SMTC
+#include <asm/mipsmtregs.h>
+extern void smtc_idle_loop_hook(void);
+#endif /* CONFIG_MIPS_MT_SMTC */
 
 /*
  * The idle thread. There's no useful work to be done, so just try to conserve
@@ -51,9 +55,13 @@ ATTRIB_NORET void cpu_idle(void)
 {
 	/* endless idle loop with no priority at all */
 	while (1) {
-		while (!need_resched())
+		while (!need_resched()) {
+#ifdef CONFIG_MIPS_MT_SMTC
+			smtc_idle_loop_hook();
+#endif /* CONFIG_MIPS_MT_SMTC */
 			if (cpu_wait)
 				(*cpu_wait)();
+		}
 		preempt_enable_no_resched();
 		schedule();
 		preempt_disable();
@@ -177,6 +185,17 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long usp,
 	childregs->cp0_status &= ~(ST0_CU2|ST0_CU1);
 	clear_tsk_thread_flag(p, TIF_USEDFPU);
 
+#ifdef CONFIG_MIPS_MT_FPAFF
+	/*
+	 * FPU affinity support is cleaner if we track the
+	 * user-visible CPU affinity from the very beginning.
+	 * The generic cpus_allowed mask will already have
+	 * been copied from the parent before copy_thread
+	 * is invoked.
+	 */
+	p->thread.user_cpus_allowed = p->cpus_allowed;
+#endif /* CONFIG_MIPS_MT_FPAFF */
+
 	if (clone_flags & CLONE_SETTLS)
 		ti->tp_value = regs->regs[7];
 
diff --git a/arch/mips/kernel/ptrace.c b/arch/mips/kernel/ptrace.c
index f838b36cc765..9b4733c12395 100644
--- a/arch/mips/kernel/ptrace.c
+++ b/arch/mips/kernel/ptrace.c
@@ -248,10 +248,20 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 			break;
 		case FPC_EIR: {	/* implementation / version register */
 			unsigned int flags;
+#ifdef CONFIG_MIPS_MT_SMTC
+			unsigned int irqflags;
+			unsigned int mtflags;
+#endif /* CONFIG_MIPS_MT_SMTC */
 
 			if (!cpu_has_fpu)
 				break;
 
+#ifdef CONFIG_MIPS_MT_SMTC
+			/* Read-modify-write of Status must be atomic */
+			local_irq_save(irqflags);
+			mtflags = dmt();
+#endif /* CONFIG_MIPS_MT_SMTC */
+
 			preempt_disable();
 			if (cpu_has_mipsmt) {
 				unsigned int vpflags = dvpe();
@@ -266,6 +276,10 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 				__asm__ __volatile__("cfc1\t%0,$0": "=r" (tmp));
 				write_c0_status(flags);
 			}
+#ifdef CONFIG_MIPS_MT_SMTC
+			emt(mtflags);
+			local_irq_restore(irqflags);
+#endif /* CONFIG_MIPS_MT_SMTC */
 			preempt_enable();
 			break;
 		}
@@ -469,7 +483,7 @@ static inline int audit_arch(void)
 asmlinkage void do_syscall_trace(struct pt_regs *regs, int entryexit)
 {
 	if (unlikely(current->audit_context) && entryexit)
-		audit_syscall_exit(current, AUDITSC_RESULT(regs->regs[2]),
+		audit_syscall_exit(AUDITSC_RESULT(regs->regs[2]),
 		                   regs->regs[2]);
 
 	if (!(current->ptrace & PT_PTRACED))
@@ -493,7 +507,7 @@ asmlinkage void do_syscall_trace(struct pt_regs *regs, int entryexit)
 	}
  out:
 	if (unlikely(current->audit_context) && !entryexit)
-		audit_syscall_entry(current, audit_arch(), regs->regs[2],
+		audit_syscall_entry(audit_arch(), regs->regs[2],
 				    regs->regs[4], regs->regs[5],
 				    regs->regs[6], regs->regs[7]);
 }
diff --git a/arch/mips/kernel/ptrace32.c b/arch/mips/kernel/ptrace32.c
index 0d5cf97af727..8704dc0496ea 100644
--- a/arch/mips/kernel/ptrace32.c
+++ b/arch/mips/kernel/ptrace32.c
@@ -173,12 +173,22 @@ asmlinkage int sys32_ptrace(int request, int pid, int addr, int data)
 			break;
 		case FPC_EIR: {	/* implementation / version register */
 			unsigned int flags;
+#ifdef CONFIG_MIPS_MT_SMTC
+			unsigned int irqflags;
+			unsigned int mtflags;
+#endif /* CONFIG_MIPS_MT_SMTC */
 
 			if (!cpu_has_fpu) {
 				tmp = 0;
 				break;
 			}
 
+#ifdef CONFIG_MIPS_MT_SMTC
+			/* Read-modify-write of Status must be atomic */
+			local_irq_save(irqflags);
+			mtflags = dmt();
+#endif /* CONFIG_MIPS_MT_SMTC */
+
 			preempt_disable();
 			if (cpu_has_mipsmt) {
 				unsigned int vpflags = dvpe();
@@ -193,6 +203,10 @@ asmlinkage int sys32_ptrace(int request, int pid, int addr, int data)
 				__asm__ __volatile__("cfc1\t%0,$0": "=r" (tmp));
 				write_c0_status(flags);
 			}
+#ifdef CONFIG_MIPS_MT_SMTC
+			emt(mtflags);
+			local_irq_restore(irqflags);
+#endif /* CONFIG_MIPS_MT_SMTC */
 			preempt_enable();
 			break;
 		}
diff --git a/arch/mips/kernel/r4k_switch.S b/arch/mips/kernel/r4k_switch.S
index d2afbd19a9c8..0b1b54acee9f 100644
--- a/arch/mips/kernel/r4k_switch.S
+++ b/arch/mips/kernel/r4k_switch.S
@@ -88,7 +88,18 @@
 
 	PTR_ADDIU	t0, $28, _THREAD_SIZE - 32
 	set_saved_sp	t0, t1, t2
-
+#ifdef CONFIG_MIPS_MT_SMTC
+	/* Read-modify-writes of Status must be atomic on a VPE */
+	mfc0	t2, CP0_TCSTATUS
+	ori	t1, t2, TCSTATUS_IXMT
+	mtc0	t1, CP0_TCSTATUS
+	andi	t2, t2, TCSTATUS_IXMT
+	ehb
+	DMT	8				# dmt	t0
+	move	t1,ra
+	jal	mips_ihb
+	move	ra,t1
+#endif /* CONFIG_MIPS_MT_SMTC */
 	mfc0	t1, CP0_STATUS		/* Do we really need this? */
 	li	a3, 0xff01
 	and	t1, a3
@@ -97,6 +108,18 @@
 	and	a2, a3
 	or	a2, t1
 	mtc0	a2, CP0_STATUS
+#ifdef CONFIG_MIPS_MT_SMTC
+	ehb
+	andi	t0, t0, VPECONTROL_TE
+	beqz	t0, 1f
+	emt
+1:
+	mfc0	t1, CP0_TCSTATUS
+	xori	t1, t1, TCSTATUS_IXMT
+	or	t1, t1, t2
+	mtc0	t1, CP0_TCSTATUS
+	ehb
+#endif /* CONFIG_MIPS_MT_SMTC */
 	move	v0, a0
 	jr	ra
 	END(resume)
@@ -131,10 +154,19 @@ LEAF(_restore_fp)
 #define FPU_DEFAULT  0x00000000
 
 LEAF(_init_fpu)
+#ifdef CONFIG_MIPS_MT_SMTC
+	/* Rather than manipulate per-VPE Status, set per-TC bit in TCStatus */
+	mfc0	t0, CP0_TCSTATUS
+	/* Bit position is the same for Status, TCStatus */
+	li	t1, ST0_CU1
+	or	t0, t1
+	mtc0	t0, CP0_TCSTATUS
+#else /* Normal MIPS CU1 enable */
 	mfc0	t0, CP0_STATUS
 	li	t1, ST0_CU1
 	or	t0, t1
 	mtc0	t0, CP0_STATUS
+#endif /* CONFIG_MIPS_MT_SMTC */
 	fpu_enable_hazard
 
 	li	t1, FPU_DEFAULT
diff --git a/arch/mips/kernel/rtlx.c b/arch/mips/kernel/rtlx.c
index 986a9cf23067..caf777f83289 100644
--- a/arch/mips/kernel/rtlx.c
+++ b/arch/mips/kernel/rtlx.c
@@ -21,45 +21,44 @@
 #include <linux/module.h>
 #include <linux/fs.h>
 #include <linux/init.h>
+#include <asm/uaccess.h>
+#include <linux/slab.h>
+#include <linux/list.h>
+#include <linux/vmalloc.h>
+#include <linux/elf.h>
+#include <linux/seq_file.h>
+#include <linux/syscalls.h>
+#include <linux/moduleloader.h>
 #include <linux/interrupt.h>
-#include <linux/irq.h>
 #include <linux/poll.h>
 #include <linux/sched.h>
 #include <linux/wait.h>
-
 #include <asm/mipsmtregs.h>
-#include <asm/bitops.h>
+#include <asm/cacheflush.h>
+#include <asm/atomic.h>
 #include <asm/cpu.h>
 #include <asm/processor.h>
+#include <asm/system.h>
+#include <asm/vpe.h>
 #include <asm/rtlx.h>
-#include <asm/uaccess.h>
 
 #define RTLX_TARG_VPE 1
 
 static struct rtlx_info *rtlx;
 static int major;
 static char module_name[] = "rtlx";
-static struct irqaction irq;
-static int irq_num;
-
-static inline int spacefree(int read, int write, int size)
-{
-	if (read == write) {
-		/*
-		 * never fill the buffer completely, so indexes are always
-		 * equal if empty and only empty, or !equal if data available
-		 */
-		return size - 1;
-	}
-
-	return ((read + size - write) % size) - 1;
-}
 
 static struct chan_waitqueues {
 	wait_queue_head_t rt_queue;
 	wait_queue_head_t lx_queue;
+	int in_open;
 } channel_wqs[RTLX_CHANNELS];
 
+static struct irqaction irq;
+static int irq_num;
+static struct vpe_notifications notify;
+static int sp_stopping = 0;
+
 extern void *vpe_get_shared(int index);
 
 static void rtlx_dispatch(struct pt_regs *regs)
@@ -67,174 +66,298 @@ static void rtlx_dispatch(struct pt_regs *regs)
 	do_IRQ(MIPSCPU_INT_BASE + MIPS_CPU_RTLX_IRQ, regs);
 }
 
+
+/* Interrupt handler may be called before rtlx_init has otherwise had
+   a chance to run.
+*/
 static irqreturn_t rtlx_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 {
 	int i;
 
 	for (i = 0; i < RTLX_CHANNELS; i++) {
-		struct rtlx_channel *chan = &rtlx->channel[i];
-
-		if (chan->lx_read != chan->lx_write)
-			wake_up_interruptible(&channel_wqs[i].lx_queue);
+			wake_up(&channel_wqs[i].lx_queue);
+			wake_up(&channel_wqs[i].rt_queue);
 	}
 
 	return IRQ_HANDLED;
 }
 
-/* call when we have the address of the shared structure from the SP side. */
-static int rtlx_init(struct rtlx_info *rtlxi)
+static __attribute_used__ void dump_rtlx(void)
 {
 	int i;
 
-	if (rtlxi->id != RTLX_ID) {
-		printk(KERN_WARNING "no valid RTLX id at 0x%p\n", rtlxi);
-		return -ENOEXEC;
-	}
+	printk("id 0x%lx state %d\n", rtlx->id, rtlx->state);
 
-	/* initialise the wait queues */
 	for (i = 0; i < RTLX_CHANNELS; i++) {
-		init_waitqueue_head(&channel_wqs[i].rt_queue);
-		init_waitqueue_head(&channel_wqs[i].lx_queue);
-	}
+		struct rtlx_channel *chan = &rtlx->channel[i];
 
-	/* set up for interrupt handling */
-	memset(&irq, 0, sizeof(struct irqaction));
+		printk(" rt_state %d lx_state %d buffer_size %d\n",
+		       chan->rt_state, chan->lx_state, chan->buffer_size);
 
-	if (cpu_has_vint)
-		set_vi_handler(MIPS_CPU_RTLX_IRQ, rtlx_dispatch);
+		printk(" rt_read %d rt_write %d\n",
+		       chan->rt_read, chan->rt_write);
+
+		printk(" lx_read %d lx_write %d\n",
+		       chan->lx_read, chan->lx_write);
 
-	irq_num = MIPSCPU_INT_BASE + MIPS_CPU_RTLX_IRQ;
-	irq.handler = rtlx_interrupt;
-	irq.flags = SA_INTERRUPT;
-	irq.name = "RTLX";
-	irq.dev_id = rtlx;
-	setup_irq(irq_num, &irq);
+		printk(" rt_buffer <%s>\n", chan->rt_buffer);
+		printk(" lx_buffer <%s>\n", chan->lx_buffer);
+	}
+}
+
+/* call when we have the address of the shared structure from the SP side. */
+static int rtlx_init(struct rtlx_info *rtlxi)
+{
+	if (rtlxi->id != RTLX_ID) {
+		printk(KERN_ERR "no valid RTLX id at 0x%p 0x%x\n", rtlxi, rtlxi->id);
+		return -ENOEXEC;
+	}
 
 	rtlx = rtlxi;
 
 	return 0;
 }
 
-/* only allow one open process at a time to open each channel */
-static int rtlx_open(struct inode *inode, struct file *filp)
+/* notifications */
+static void starting(int vpe)
+{
+	int i;
+	sp_stopping = 0;
+
+	/* force a reload of rtlx */
+	rtlx=NULL;
+
+	/* wake up any sleeping rtlx_open's */
+	for (i = 0; i < RTLX_CHANNELS; i++)
+		wake_up_interruptible(&channel_wqs[i].lx_queue);
+}
+
+static void stopping(int vpe)
 {
-	int minor, ret;
+	int i;
+
+	sp_stopping = 1;
+	for (i = 0; i < RTLX_CHANNELS; i++)
+		wake_up_interruptible(&channel_wqs[i].lx_queue);
+}
+
+
+int rtlx_open(int index, int can_sleep)
+{
+	int ret;
 	struct rtlx_channel *chan;
+	volatile struct rtlx_info **p;
 
-	/* assume only 1 device at the mo. */
-	minor = MINOR(inode->i_rdev);
+	if (index >= RTLX_CHANNELS) {
+		printk(KERN_DEBUG "rtlx_open index out of range\n");
+		return -ENOSYS;
+	}
+
+	if (channel_wqs[index].in_open) {
+		printk(KERN_DEBUG "rtlx_open channel %d already opened\n", index);
+		return -EBUSY;
+	}
+
+	channel_wqs[index].in_open++;
 
 	if (rtlx == NULL) {
-		struct rtlx_info **p;
 		if( (p = vpe_get_shared(RTLX_TARG_VPE)) == NULL) {
-			printk(KERN_ERR "vpe_get_shared is NULL. "
-			       "Has an SP program been loaded?\n");
-			return -EFAULT;
+			if (can_sleep) {
+				DECLARE_WAITQUEUE(wait, current);
+
+				/* go to sleep */
+				add_wait_queue(&channel_wqs[index].lx_queue, &wait);
+
+				set_current_state(TASK_INTERRUPTIBLE);
+				while ((p = vpe_get_shared(RTLX_TARG_VPE)) == NULL) {
+					schedule();
+					set_current_state(TASK_INTERRUPTIBLE);
+				}
+
+				set_current_state(TASK_RUNNING);
+				remove_wait_queue(&channel_wqs[index].lx_queue, &wait);
+
+				/* back running */
+			} else {
+				printk( KERN_DEBUG "No SP program loaded, and device "
+					"opened with O_NONBLOCK\n");
+				channel_wqs[index].in_open = 0;
+				return -ENOSYS;
+			}
 		}
 
 		if (*p == NULL) {
-			printk(KERN_ERR "vpe_shared %p %p\n", p, *p);
-			return -EFAULT;
+			if (can_sleep) {
+				DECLARE_WAITQUEUE(wait, current);
+
+				/* go to sleep */
+				add_wait_queue(&channel_wqs[index].lx_queue, &wait);
+
+				set_current_state(TASK_INTERRUPTIBLE);
+				while (*p == NULL) {
+					schedule();
+
+					/* reset task state to interruptable otherwise
+					   we'll whizz round here like a very fast loopy
+					   thing. schedule() appears to return with state
+					   set to TASK_RUNNING.
+
+					   If the loaded SP program, for whatever reason,
+					   doesn't set up the shared structure *p will never
+					   become true. So whoever connected to either /dev/rt?
+					   or if it was kspd, will then take up rather a lot of
+					   processor cycles.
+					*/
+
+					set_current_state(TASK_INTERRUPTIBLE);
+				}
+
+				set_current_state(TASK_RUNNING);
+				remove_wait_queue(&channel_wqs[index].lx_queue, &wait);
+
+				/* back running */
+			}
+			else {
+				printk(" *vpe_get_shared is NULL. "
+				       "Has an SP program been loaded?\n");
+				channel_wqs[index].in_open = 0;
+				return -ENOSYS;
+			}
 		}
 
-		if ((ret = rtlx_init(*p)) < 0)
-			return ret;
+		if ((unsigned int)*p < KSEG0) {
+			printk(KERN_WARNING "vpe_get_shared returned an invalid pointer "
+			       "maybe an error code %d\n", (int)*p);
+ 			channel_wqs[index].in_open = 0;
+			return -ENOSYS;
+		}
+
+ 		if ((ret = rtlx_init(*p)) < 0) {
+ 			channel_wqs[index].in_open = 0;
+  			return ret;
+ 		}
 	}
 
-	chan = &rtlx->channel[minor];
+	chan = &rtlx->channel[index];
 
-	if (test_and_set_bit(RTLX_STATE_OPENED, &chan->lx_state))
-		return -EBUSY;
+ 	if (chan->lx_state == RTLX_STATE_OPENED) {
+ 		channel_wqs[index].in_open = 0;
+  		return -EBUSY;
+ 	}
 
+  	chan->lx_state = RTLX_STATE_OPENED;
+ 	channel_wqs[index].in_open = 0;
 	return 0;
 }
 
-static int rtlx_release(struct inode *inode, struct file *filp)
+int rtlx_release(int index)
 {
-	int minor = MINOR(inode->i_rdev);
-
-	clear_bit(RTLX_STATE_OPENED, &rtlx->channel[minor].lx_state);
-	smp_mb__after_clear_bit();
-
+	rtlx->channel[index].lx_state = RTLX_STATE_UNUSED;
 	return 0;
 }
 
-static unsigned int rtlx_poll(struct file *file, poll_table * wait)
+unsigned int rtlx_read_poll(int index, int can_sleep)
 {
-	int minor;
-	unsigned int mask = 0;
-	struct rtlx_channel *chan;
+ 	struct rtlx_channel *chan;
 
-	minor = MINOR(file->f_dentry->d_inode->i_rdev);
-	chan = &rtlx->channel[minor];
+ 	if (rtlx == NULL)
+ 		return 0;
 
-	poll_wait(file, &channel_wqs[minor].rt_queue, wait);
-	poll_wait(file, &channel_wqs[minor].lx_queue, wait);
+ 	chan = &rtlx->channel[index];
 
 	/* data available to read? */
-	if (chan->lx_read != chan->lx_write)
-		mask |= POLLIN | POLLRDNORM;
+	if (chan->lx_read == chan->lx_write) {
+		if (can_sleep) {
+			DECLARE_WAITQUEUE(wait, current);
 
-	/* space to write */
-	if (spacefree(chan->rt_read, chan->rt_write, chan->buffer_size))
-		mask |= POLLOUT | POLLWRNORM;
+			/* go to sleep */
+			add_wait_queue(&channel_wqs[index].lx_queue, &wait);
 
-	return mask;
+			set_current_state(TASK_INTERRUPTIBLE);
+			while (chan->lx_read == chan->lx_write) {
+				schedule();
+
+				set_current_state(TASK_INTERRUPTIBLE);
+
+				if (sp_stopping) {
+					set_current_state(TASK_RUNNING);
+					remove_wait_queue(&channel_wqs[index].lx_queue, &wait);
+					return 0;
+				}
+			}
+
+			set_current_state(TASK_RUNNING);
+			remove_wait_queue(&channel_wqs[index].lx_queue, &wait);
+
+			/* back running */
+		}
+		else
+			return 0;
+	}
+
+	return (chan->lx_write + chan->buffer_size - chan->lx_read)
+	       % chan->buffer_size;
 }
 
-static ssize_t rtlx_read(struct file *file, char __user * buffer, size_t count,
-			 loff_t * ppos)
+static inline int write_spacefree(int read, int write, int size)
 {
-	unsigned long failed;
-	size_t fl = 0L;
-	int minor;
-	struct rtlx_channel *lx;
-	DECLARE_WAITQUEUE(wait, current);
+	if (read == write) {
+		/*
+		 * Never fill the buffer completely, so indexes are always
+		 * equal if empty and only empty, or !equal if data available
+		 */
+		return size - 1;
+	}
 
-	minor = MINOR(file->f_dentry->d_inode->i_rdev);
-	lx = &rtlx->channel[minor];
+	return ((read + size - write) % size) - 1;
+}
 
-	/* data available? */
-	if (lx->lx_write == lx->lx_read) {
-		if (file->f_flags & O_NONBLOCK)
-			return 0;	/* -EAGAIN makes cat whinge */
+unsigned int rtlx_write_poll(int index)
+{
+	struct rtlx_channel *chan = &rtlx->channel[index];
+	return write_spacefree(chan->rt_read, chan->rt_write, chan->buffer_size);
+}
 
-		/* go to sleep */
-		add_wait_queue(&channel_wqs[minor].lx_queue, &wait);
-		set_current_state(TASK_INTERRUPTIBLE);
+static inline void copy_to(void *dst, void *src, size_t count, int user)
+{
+	if (user)
+		copy_to_user(dst, src, count);
+	else
+		memcpy(dst, src, count);
+}
 
-		while (lx->lx_write == lx->lx_read)
-			schedule();
+static inline void copy_from(void *dst, void *src, size_t count, int user)
+{
+	if (user)
+		copy_from_user(dst, src, count);
+	else
+		memcpy(dst, src, count);
+}
 
-		set_current_state(TASK_RUNNING);
-		remove_wait_queue(&channel_wqs[minor].lx_queue, &wait);
+ssize_t rtlx_read(int index, void *buff, size_t count, int user)
+{
+	size_t fl = 0L;
+	struct rtlx_channel *lx;
 
-		/* back running */
-	}
+	if (rtlx == NULL)
+		return -ENOSYS;
+
+	lx = &rtlx->channel[index];
 
 	/* find out how much in total */
 	count = min(count,
-		    (size_t)(lx->lx_write + lx->buffer_size - lx->lx_read) % lx->buffer_size);
+		     (size_t)(lx->lx_write + lx->buffer_size - lx->lx_read)
+		     % lx->buffer_size);
 
 	/* then how much from the read pointer onwards */
-	fl = min(count, (size_t)lx->buffer_size - lx->lx_read);
+	fl = min( count, (size_t)lx->buffer_size - lx->lx_read);
 
-	failed = copy_to_user (buffer, &lx->lx_buffer[lx->lx_read], fl);
-	if (failed) {
-		count = fl - failed;
-		goto out;
-	}
+	copy_to(buff, &lx->lx_buffer[lx->lx_read], fl, user);
 
 	/* and if there is anything left at the beginning of the buffer */
-	if (count - fl) {
-		failed = copy_to_user (buffer + fl, lx->lx_buffer, count - fl);
-		if (failed) {
-			count -= failed;
-			goto out;
-		}
-	}
+	if ( count - fl )
+		copy_to (buff + fl, lx->lx_buffer, count - fl, user);
 
-out:
 	/* update the index */
 	lx->lx_read += count;
 	lx->lx_read %= lx->buffer_size;
@@ -242,20 +365,100 @@ out:
 	return count;
 }
 
-static ssize_t rtlx_write(struct file *file, const char __user * buffer,
+ssize_t rtlx_write(int index, void *buffer, size_t count, int user)
+{
+	struct rtlx_channel *rt;
+	size_t fl;
+
+	if (rtlx == NULL)
+		return(-ENOSYS);
+
+	rt = &rtlx->channel[index];
+
+	/* total number of bytes to copy */
+	count = min(count,
+		    (size_t)write_spacefree(rt->rt_read, rt->rt_write,
+					    rt->buffer_size));
+
+	/* first bit from write pointer to the end of the buffer, or count */
+	fl = min(count, (size_t) rt->buffer_size - rt->rt_write);
+
+	copy_from (&rt->rt_buffer[rt->rt_write], buffer, fl, user);
+
+	/* if there's any left copy to the beginning of the buffer */
+	if( count - fl )
+		copy_from (rt->rt_buffer, buffer + fl, count - fl, user);
+
+	rt->rt_write += count;
+	rt->rt_write %= rt->buffer_size;
+
+	return(count);
+}
+
+
+static int file_open(struct inode *inode, struct file *filp)
+{
+	int minor = iminor(inode);
+
+	return rtlx_open(minor, (filp->f_flags & O_NONBLOCK) ? 0 : 1);
+}
+
+static int file_release(struct inode *inode, struct file *filp)
+{
+	int minor = iminor(inode);
+
+	return rtlx_release(minor);
+}
+
+static unsigned int file_poll(struct file *file, poll_table * wait)
+{
+	int minor;
+	unsigned int mask = 0;
+
+	minor = iminor(file->f_dentry->d_inode);
+
+	poll_wait(file, &channel_wqs[minor].rt_queue, wait);
+	poll_wait(file, &channel_wqs[minor].lx_queue, wait);
+
+	if (rtlx == NULL)
+		return 0;
+
+	/* data available to read? */
+	if (rtlx_read_poll(minor, 0))
+		mask |= POLLIN | POLLRDNORM;
+
+	/* space to write */
+	if (rtlx_write_poll(minor))
+		mask |= POLLOUT | POLLWRNORM;
+
+	return mask;
+}
+
+static ssize_t file_read(struct file *file, char __user * buffer, size_t count,
+			 loff_t * ppos)
+{
+	int minor = iminor(file->f_dentry->d_inode);
+
+	/* data available? */
+	if (!rtlx_read_poll(minor, (file->f_flags & O_NONBLOCK) ? 0 : 1)) {
+		return 0;	// -EAGAIN makes cat whinge
+	}
+
+	return rtlx_read(minor, buffer, count, 1);
+}
+
+static ssize_t file_write(struct file *file, const char __user * buffer,
 			  size_t count, loff_t * ppos)
 {
-	unsigned long failed;
 	int minor;
 	struct rtlx_channel *rt;
-	size_t fl;
 	DECLARE_WAITQUEUE(wait, current);
 
-	minor = MINOR(file->f_dentry->d_inode->i_rdev);
+	minor = iminor(file->f_dentry->d_inode);
 	rt = &rtlx->channel[minor];
 
 	/* any space left... */
-	if (!spacefree(rt->rt_read, rt->rt_write, rt->buffer_size)) {
+	if (!rtlx_write_poll(minor)) {
 
 		if (file->f_flags & O_NONBLOCK)
 			return -EAGAIN;
@@ -263,61 +466,64 @@ static ssize_t rtlx_write(struct file *file, const char __user * buffer,
 		add_wait_queue(&channel_wqs[minor].rt_queue, &wait);
 		set_current_state(TASK_INTERRUPTIBLE);
 
-		while (!spacefree(rt->rt_read, rt->rt_write, rt->buffer_size))
+		while (!rtlx_write_poll(minor))
 			schedule();
 
 		set_current_state(TASK_RUNNING);
 		remove_wait_queue(&channel_wqs[minor].rt_queue, &wait);
 	}
 
-	/* total number of bytes to copy */
-	count = min(count, (size_t)spacefree(rt->rt_read, rt->rt_write, rt->buffer_size) );
-
-	/* first bit from write pointer to the end of the buffer, or count */
-	fl = min(count, (size_t) rt->buffer_size - rt->rt_write);
-
-	failed = copy_from_user(&rt->rt_buffer[rt->rt_write], buffer, fl);
-	if (failed) {
-		count = fl - failed;
-		goto out;
-	}
-
-	/* if there's any left copy to the beginning of the buffer */
-	if (count - fl) {
-		failed = copy_from_user(rt->rt_buffer, buffer + fl, count - fl);
-		if (failed) {
-			count -= failed;
-			goto out;
-		}
-	}
-
-out:
-	rt->rt_write += count;
-	rt->rt_write %= rt->buffer_size;
-
-	return count;
+	return rtlx_write(minor, (void *)buffer, count, 1);
 }
 
 static struct file_operations rtlx_fops = {
-	.owner		= THIS_MODULE,
-	.open		= rtlx_open,
-	.release	= rtlx_release,
-	.write		= rtlx_write,
-	.read		= rtlx_read,
-	.poll		= rtlx_poll
+	.owner =   THIS_MODULE,
+	.open =    file_open,
+	.release = file_release,
+	.write =   file_write,
+	.read =    file_read,
+	.poll =    file_poll
+};
+
+static struct irqaction rtlx_irq = {
+	.handler	= rtlx_interrupt,
+	.flags		= SA_INTERRUPT,
+	.name		= "RTLX",
 };
 
+static int rtlx_irq_num = MIPSCPU_INT_BASE + MIPS_CPU_RTLX_IRQ;
+
 static char register_chrdev_failed[] __initdata =
 	KERN_ERR "rtlx_module_init: unable to register device\n";
 
-static int __init rtlx_module_init(void)
+static int rtlx_module_init(void)
 {
+	int i;
+
 	major = register_chrdev(0, module_name, &rtlx_fops);
 	if (major < 0) {
 		printk(register_chrdev_failed);
 		return major;
 	}
 
+	/* initialise the wait queues */
+	for (i = 0; i < RTLX_CHANNELS; i++) {
+		init_waitqueue_head(&channel_wqs[i].rt_queue);
+		init_waitqueue_head(&channel_wqs[i].lx_queue);
+		channel_wqs[i].in_open = 0;
+	}
+
+	/* set up notifiers */
+	notify.start = starting;
+	notify.stop = stopping;
+	vpe_notify(RTLX_TARG_VPE, &notify);
+
+	if (cpu_has_vint)
+		set_vi_handler(MIPS_CPU_RTLX_IRQ, rtlx_dispatch);
+
+	rtlx_irq.dev_id = rtlx;
+	setup_irq(rtlx_irq_num, &rtlx_irq);
+
 	return 0;
 }
 
@@ -330,5 +536,5 @@ module_init(rtlx_module_init);
 module_exit(rtlx_module_exit);
 
 MODULE_DESCRIPTION("MIPS RTLX");
-MODULE_AUTHOR("Elizabeth Clarke, MIPS Technologies, Inc.");
+MODULE_AUTHOR("Elizabeth Oldham, MIPS Technologies, Inc.");
 MODULE_LICENSE("GPL");
diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S
index 2f2dc54b2e26..a0ac0e5f61ad 100644
--- a/arch/mips/kernel/scall32-o32.S
+++ b/arch/mips/kernel/scall32-o32.S
@@ -569,8 +569,19 @@ einval:	li	v0, -EINVAL
 	sys	sys_tkill		2
 	sys	sys_sendfile64		5
 	sys	sys_futex		6
+#ifdef CONFIG_MIPS_MT_FPAFF
+	/*
+	 * For FPU affinity scheduling on MIPS MT processors, we need to
+	 * intercept sys_sched_xxxaffinity() calls until we get a proper hook
+	 * in kernel/sched.c.  Considered only temporary we only support these
+	 * hooks for the 32-bit kernel - there is no MIPS64 MT processor atm.
+	 */
+	sys	mipsmt_sys_sched_setaffinity	3
+	sys	mipsmt_sys_sched_getaffinity	3
+#else
 	sys	sys_sched_setaffinity	3
 	sys	sys_sched_getaffinity	3	/* 4240 */
+#endif /* CONFIG_MIPS_MT_FPAFF */
 	sys	sys_io_setup		2
 	sys	sys_io_destroy		1
 	sys	sys_io_getevents	5
@@ -634,6 +645,8 @@ einval:	li	v0, -EINVAL
 	sys	sys_pselect6		6
 	sys	sys_ppoll		5
 	sys	sys_unshare		1
+	sys	sys_splice		4
+	sys	sys_sync_file_range	7	/* 4305 */
 	.endm
 
 	/* We pre-compute the number of _instruction_ bytes needed to
diff --git a/arch/mips/kernel/scall64-64.S b/arch/mips/kernel/scall64-64.S
index 98bf25df56f3..9ba750887377 100644
--- a/arch/mips/kernel/scall64-64.S
+++ b/arch/mips/kernel/scall64-64.S
@@ -460,3 +460,5 @@ sys_call_table:
 	PTR	sys_pselect6			/* 5260 */
 	PTR	sys_ppoll
 	PTR	sys_unshare
+	PTR	sys_splice
+	PTR	sys_sync_file_range
diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S
index 05a2c0567dae..942aca26f9c4 100644
--- a/arch/mips/kernel/scall64-n32.S
+++ b/arch/mips/kernel/scall64-n32.S
@@ -386,3 +386,5 @@ EXPORT(sysn32_call_table)
 	PTR	sys_pselect6
 	PTR	sys_ppoll			/* 6265 */
 	PTR	sys_unshare
+	PTR	sys_splice
+	PTR	sys_sync_file_range
diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S
index 19c4ca481b02..8efb23a84131 100644
--- a/arch/mips/kernel/scall64-o32.S
+++ b/arch/mips/kernel/scall64-o32.S
@@ -209,7 +209,7 @@ sys_call_table:
 	PTR	sys_fork
 	PTR	sys_read
 	PTR	sys_write
-	PTR	sys_open			/* 4005 */
+	PTR	compat_sys_open			/* 4005 */
 	PTR	sys_close
 	PTR	sys_waitpid
 	PTR	sys_creat
@@ -508,4 +508,6 @@ sys_call_table:
 	PTR	sys_pselect6
 	PTR	sys_ppoll
 	PTR	sys_unshare
+	PTR	sys_splice
+	PTR	sys32_sync_file_range		/* 4305 */
 	.size	sys_call_table,.-sys_call_table
diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index dcbfd27071f0..397a70e651b5 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -246,7 +246,7 @@ static inline int parse_rd_cmdline(unsigned long* rd_start, unsigned long* rd_en
 #ifdef CONFIG_64BIT
 	/* HACK: Guess if the sign extension was forgotten */
 	if (start > 0x0000000080000000 && start < 0x00000000ffffffff)
-		start |= 0xffffffff00000000;
+		start |= 0xffffffff00000000UL;
 #endif
 
 	end = start + size;
@@ -355,8 +355,6 @@ static inline void bootmem_init(void)
 	}
 #endif
 
-	memory_present(0, first_usable_pfn, max_low_pfn);
-
 	/* Initialize the boot-time allocator with low memory only.  */
 	bootmap_size = init_bootmem(first_usable_pfn, max_low_pfn);
 
@@ -410,6 +408,7 @@ static inline void bootmem_init(void)
 
 		/* Register lowmem ranges */
 		free_bootmem(PFN_PHYS(curr_pfn), PFN_PHYS(size));
+		memory_present(0, curr_pfn, curr_pfn + size - 1);
 	}
 
 	/* Reserve the bootmap memory.  */
@@ -419,17 +418,20 @@ static inline void bootmem_init(void)
 #ifdef CONFIG_BLK_DEV_INITRD
 	initrd_below_start_ok = 1;
 	if (initrd_start) {
-		unsigned long initrd_size = ((unsigned char *)initrd_end) - ((unsigned char *)initrd_start);
+		unsigned long initrd_size = ((unsigned char *)initrd_end) -
+			((unsigned char *)initrd_start);
+		const int width = sizeof(long) * 2;
+
 		printk("Initial ramdisk at: 0x%p (%lu bytes)\n",
 		       (void *)initrd_start, initrd_size);
 
 		if (CPHYSADDR(initrd_end) > PFN_PHYS(max_low_pfn)) {
 			printk("initrd extends beyond end of memory "
 			       "(0x%0*Lx > 0x%0*Lx)\ndisabling initrd\n",
-			       sizeof(long) * 2,
-			       (unsigned long long)CPHYSADDR(initrd_end),
-			       sizeof(long) * 2,
-			       (unsigned long long)PFN_PHYS(max_low_pfn));
+			       width,
+			       (unsigned long long) CPHYSADDR(initrd_end),
+			       width,
+			       (unsigned long long) PFN_PHYS(max_low_pfn));
 			initrd_start = initrd_end = 0;
 			initrd_reserve_bootmem = 0;
 		}
@@ -529,7 +531,10 @@ void __init setup_arch(char **cmdline_p)
 
 int __init fpu_disable(char *s)
 {
-	cpu_data[0].options &= ~MIPS_CPU_FPU;
+	int i;
+
+	for (i = 0; i < NR_CPUS; i++)
+		cpu_data[i].options &= ~MIPS_CPU_FPU;
 
 	return 1;
 }
diff --git a/arch/mips/kernel/signal-common.h b/arch/mips/kernel/signal-common.h
index 3ca786215d48..ce6cb915c0a7 100644
--- a/arch/mips/kernel/signal-common.h
+++ b/arch/mips/kernel/signal-common.h
@@ -31,7 +31,6 @@ setup_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc)
 	save_gp_reg(31);
 #undef save_gp_reg
 
-#ifdef CONFIG_32BIT
 	err |= __put_user(regs->hi, &sc->sc_mdhi);
 	err |= __put_user(regs->lo, &sc->sc_mdlo);
 	if (cpu_has_dsp) {
@@ -43,20 +42,6 @@ setup_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc)
 		err |= __put_user(mflo3(), &sc->sc_lo3);
 		err |= __put_user(rddsp(DSP_MASK), &sc->sc_dsp);
 	}
-#endif
-#ifdef CONFIG_64BIT
-	err |= __put_user(regs->hi, &sc->sc_hi[0]);
-	err |= __put_user(regs->lo, &sc->sc_lo[0]);
-	if (cpu_has_dsp) {
-		err |= __put_user(mfhi1(), &sc->sc_hi[1]);
-		err |= __put_user(mflo1(), &sc->sc_lo[1]);
-		err |= __put_user(mfhi2(), &sc->sc_hi[2]);
-		err |= __put_user(mflo2(), &sc->sc_lo[2]);
-		err |= __put_user(mfhi3(), &sc->sc_hi[3]);
-		err |= __put_user(mflo3(), &sc->sc_lo[3]);
-		err |= __put_user(rddsp(DSP_MASK), &sc->sc_dsp);
-	}
-#endif
 
 	err |= __put_user(!!used_math(), &sc->sc_used_math);
 
@@ -92,7 +77,6 @@ restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc)
 	current_thread_info()->restart_block.fn = do_no_restart_syscall;
 
 	err |= __get_user(regs->cp0_epc, &sc->sc_pc);
-#ifdef CONFIG_32BIT
 	err |= __get_user(regs->hi, &sc->sc_mdhi);
 	err |= __get_user(regs->lo, &sc->sc_mdlo);
 	if (cpu_has_dsp) {
@@ -104,20 +88,6 @@ restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc)
 		err |= __get_user(treg, &sc->sc_lo3); mtlo3(treg);
 		err |= __get_user(treg, &sc->sc_dsp); wrdsp(treg, DSP_MASK);
 	}
-#endif
-#ifdef CONFIG_64BIT
-	err |= __get_user(regs->hi, &sc->sc_hi[0]);
-	err |= __get_user(regs->lo, &sc->sc_lo[0]);
-	if (cpu_has_dsp) {
-		err |= __get_user(treg, &sc->sc_hi[1]); mthi1(treg);
-		err |= __get_user(treg, &sc->sc_lo[1]); mthi1(treg);
-		err |= __get_user(treg, &sc->sc_hi[2]); mthi2(treg);
-		err |= __get_user(treg, &sc->sc_lo[2]); mthi2(treg);
-		err |= __get_user(treg, &sc->sc_hi[3]); mthi3(treg);
-		err |= __get_user(treg, &sc->sc_lo[3]); mthi3(treg);
-		err |= __get_user(treg, &sc->sc_dsp); wrdsp(treg, DSP_MASK);
-	}
-#endif
 
 #define restore_gp_reg(i) do {						\
 	err |= __get_user(regs->regs[i], &sc->sc_regs[i]);		\
diff --git a/arch/mips/kernel/smp_mt.c b/arch/mips/kernel/smp-mt.c
index 993b8bf56aaf..57770902b9ae 100644
--- a/arch/mips/kernel/smp_mt.c
+++ b/arch/mips/kernel/smp-mt.c
@@ -1,8 +1,4 @@
 /*
- * Copyright (C) 2004, 2005 MIPS Technologies, Inc.  All rights reserved.
- *
- *  Elizabeth Clarke (beth@mips.com)
- *
  *  This program is free software; you can distribute it and/or modify it
  *  under the terms of the GNU General Public License (Version 2) as
  *  published by the Free Software Foundation.
@@ -16,6 +12,10 @@
  *  with this program; if not, write to the Free Software Foundation, Inc.,
  *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
  *
+ * Copyright (C) 2004, 05, 06 MIPS Technologies, Inc.
+ *    Elizabeth Clarke (beth@mips.com)
+ *    Ralf Baechle (ralf@linux-mips.org)
+ * Copyright (C) 2006 Ralf Baechle (ralf@linux-mips.org)
  */
 #include <linux/kernel.h>
 #include <linux/sched.h>
@@ -24,6 +24,7 @@
 #include <linux/compiler.h>
 
 #include <asm/atomic.h>
+#include <asm/cacheflush.h>
 #include <asm/cpu.h>
 #include <asm/processor.h>
 #include <asm/system.h>
@@ -33,8 +34,8 @@
 #include <asm/time.h>
 #include <asm/mipsregs.h>
 #include <asm/mipsmtregs.h>
-#include <asm/cacheflush.h>
-#include <asm/mips-boards/maltaint.h>
+#include <asm/mips_mt.h>
+#include <asm/mips-boards/maltaint.h>  /* This is f*cking wrong */
 
 #define MIPS_CPU_IPI_RESCHED_IRQ 0
 #define MIPS_CPU_IPI_CALL_IRQ 1
@@ -66,6 +67,7 @@ void __init sanitize_tlb_entries(void)
 	if (!cpu_has_mipsmt)
 		return;
 
+	/* Enable VPC */
 	set_c0_mvpcontrol(MVPCONTROL_VPC);
 
 	back_to_back_c0_hazard();
@@ -106,12 +108,12 @@ void __init sanitize_tlb_entries(void)
 
 static void ipi_resched_dispatch (struct pt_regs *regs)
 {
-	do_IRQ(MIPS_CPU_IPI_RESCHED_IRQ, regs);
+	do_IRQ(MIPSCPU_INT_BASE + MIPS_CPU_IPI_RESCHED_IRQ, regs);
 }
 
 static void ipi_call_dispatch (struct pt_regs *regs)
 {
-	do_IRQ(MIPS_CPU_IPI_CALL_IRQ, regs);
+	do_IRQ(MIPSCPU_INT_BASE + MIPS_CPU_IPI_CALL_IRQ, regs);
 }
 
 irqreturn_t ipi_resched_interrupt(int irq, void *dev_id, struct pt_regs *regs)
@@ -148,6 +150,11 @@ void plat_smp_setup(void)
 	unsigned long val;
 	int i, num;
 
+#ifdef CONFIG_MIPS_MT_FPAFF
+	/* If we have an FPU, enroll ourselves in the FPU-full mask */
+	if (cpu_has_fpu)
+		cpu_set(0, mt_fpu_cpumask);
+#endif /* CONFIG_MIPS_MT_FPAFF */
 	if (!cpu_has_mipsmt)
 		return;
 
@@ -155,6 +162,8 @@ void plat_smp_setup(void)
 	dvpe();
 	dmt();
 
+	mips_mt_set_cpuoptions();
+
 	/* Put MVPE's into 'configuration state' */
 	set_c0_mvpcontrol(MVPCONTROL_VPC);
 
@@ -189,11 +198,13 @@ void plat_smp_setup(void)
 
 			if (i != 0) {
 				write_vpe_c0_status((read_c0_status() & ~(ST0_IM | ST0_IE | ST0_KSU)) | ST0_CU0);
-				write_vpe_c0_cause(read_vpe_c0_cause() & ~CAUSEF_IP);
 
 				/* set config to be the same as vpe0, particularly kseg0 coherency alg */
 				write_vpe_c0_config( read_c0_config());
 
+				/* make sure there are no software interrupts pending */
+				write_vpe_c0_cause(read_vpe_c0_cause() & ~(C_SW1|C_SW0));
+
 				/* Propagate Config7 */
 				write_vpe_c0_config7(read_c0_config7());
 			}
@@ -233,16 +244,16 @@ void plat_smp_setup(void)
 	/* We'll wait until starting the secondaries before starting MVPE */
 
 	printk(KERN_INFO "Detected %i available secondary CPU(s)\n", num);
+}
 
+void __init plat_prepare_cpus(unsigned int max_cpus)
+{
 	/* set up ipi interrupts */
 	if (cpu_has_vint) {
 		set_vi_handler (MIPS_CPU_IPI_RESCHED_IRQ, ipi_resched_dispatch);
 		set_vi_handler (MIPS_CPU_IPI_CALL_IRQ, ipi_call_dispatch);
 	}
-}
 
-void __init plat_prepare_cpus(unsigned int max_cpus)
-{
 	cpu_ipi_resched_irq = MIPSCPU_INT_BASE + MIPS_CPU_IPI_RESCHED_IRQ;
 	cpu_ipi_call_irq = MIPSCPU_INT_BASE + MIPS_CPU_IPI_CALL_IRQ;
 
@@ -287,7 +298,8 @@ void prom_boot_secondary(int cpu, struct task_struct *idle)
 	/* global pointer */
 	write_tc_gpr_gp((unsigned long)gp);
 
-	flush_icache_range((unsigned long)gp, (unsigned long)(gp + 1));
+	flush_icache_range((unsigned long)gp,
+	                   (unsigned long)(gp + sizeof(struct thread_info)));
 
 	/* finally out of configuration and into chaos */
 	clear_c0_mvpcontrol(MVPCONTROL_VPC);
@@ -305,6 +317,12 @@ void prom_smp_finish(void)
 {
 	write_c0_compare(read_c0_count() + (8* mips_hpt_frequency/HZ));
 
+#ifdef CONFIG_MIPS_MT_FPAFF
+	/* If we have an FPU, enroll ourselves in the FPU-full mask */
+	if (cpu_has_fpu)
+		cpu_set(smp_processor_id(), mt_fpu_cpumask);
+#endif /* CONFIG_MIPS_MT_FPAFF */
+
 	local_irq_enable();
 }
 
diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c
index 78d171bfa331..298f82fe8440 100644
--- a/arch/mips/kernel/smp.c
+++ b/arch/mips/kernel/smp.c
@@ -38,6 +38,10 @@
 #include <asm/mmu_context.h>
 #include <asm/smp.h>
 
+#ifdef CONFIG_MIPS_MT_SMTC
+#include <asm/mipsmtregs.h>
+#endif /* CONFIG_MIPS_MT_SMTC */
+
 cpumask_t phys_cpu_present_map;		/* Bitmask of available CPUs */
 volatile cpumask_t cpu_callin_map;	/* Bitmask of started secondaries */
 cpumask_t cpu_online_map;		/* Bitmask of currently online CPUs */
@@ -85,6 +89,10 @@ asmlinkage void start_secondary(void)
 {
 	unsigned int cpu;
 
+#ifdef CONFIG_MIPS_MT_SMTC
+	/* Only do cpu_probe for first TC of CPU */
+	if ((read_c0_tcbind() & TCBIND_CURTC) == 0)
+#endif /* CONFIG_MIPS_MT_SMTC */
 	cpu_probe();
 	cpu_report();
 	per_cpu_trap_init();
@@ -179,11 +187,13 @@ int smp_call_function (void (*func) (void *info), void *info, int retry,
 	if (wait)
 		while (atomic_read(&data.finished) != cpus)
 			barrier();
+	call_data = NULL;
 	spin_unlock(&smp_call_lock);
 
 	return 0;
 }
 
+
 void smp_call_function_interrupt(void)
 {
 	void (*func) (void *info) = call_data->func;
@@ -237,6 +247,9 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 	current_thread_info()->cpu = 0;
 	smp_tune_scheduling();
 	plat_prepare_cpus(max_cpus);
+#ifndef CONFIG_HOTPLUG_CPU
+	cpu_present_map = cpu_possible_map;
+#endif
 }
 
 /* preload SMP state for boot cpu */
@@ -432,7 +445,7 @@ static int __init topology_init(void)
 	int cpu;
 	int ret;
 
-	for_each_cpu(cpu) {
+	for_each_present_cpu(cpu) {
 		ret = register_cpu(&per_cpu(cpu_devices, cpu), cpu, NULL);
 		if (ret)
 			printk(KERN_WARNING "topology_init: register_cpu %d "
@@ -446,5 +459,3 @@ subsys_initcall(topology_init);
 
 EXPORT_SYMBOL(flush_tlb_page);
 EXPORT_SYMBOL(flush_tlb_one);
-EXPORT_SYMBOL(cpu_data);
-EXPORT_SYMBOL(synchronize_irq);
diff --git a/arch/mips/kernel/smtc-asm.S b/arch/mips/kernel/smtc-asm.S
new file mode 100644
index 000000000000..c9d65196d917
--- /dev/null
+++ b/arch/mips/kernel/smtc-asm.S
@@ -0,0 +1,130 @@
+/*
+ * Assembly Language Functions for MIPS MT SMTC support
+ */
+
+/*
+ * This file should be built into the kernel only if CONFIG_MIPS_MT_SMTC is set. */
+
+#include <asm/regdef.h>
+#include <asm/asmmacro.h>
+#include <asm/stackframe.h>
+#include <asm/stackframe.h>
+
+/*
+ * "Software Interrupt" linkage.
+ *
+ * This is invoked when an "Interrupt" is sent from one TC to another,
+ * where the TC to be interrupted is halted, has it's Restart address
+ * and Status values saved by the "remote control" thread, then modified
+ * to cause execution to begin here, in kenel mode. This code then
+ * disguises the TC state as that of an exception and transfers
+ * control to the general exception or vectored interrupt handler.
+ */
+	.set noreorder
+
+/*
+The __smtc_ipi_vector would use k0 and k1 as temporaries and
+1) Set EXL (this is per-VPE, so this can't be done by proxy!)
+2) Restore the K/CU and IXMT bits to the pre "exception" state
+   (EXL means no interrupts and access to the kernel map).
+3) Set EPC to be the saved value of TCRestart.
+4) Jump to the exception handler entry point passed by the sender.
+
+CAN WE PROVE THAT WE WON'T DO THIS IF INTS DISABLED??
+*/
+
+/*
+ * Reviled and slandered vision: Set EXL and restore K/CU/IXMT
+ * state of pre-halt thread, then save everything and call
+ * thought some function pointer to imaginary_exception, which
+ * will parse a register value or memory message queue to
+ * deliver things like interprocessor interrupts. On return
+ * from that function, jump to the global ret_from_irq code
+ * to invoke the scheduler and return as appropriate.
+ */
+
+#define PT_PADSLOT4 (PT_R0-8)
+#define PT_PADSLOT5 (PT_R0-4)
+
+	.text
+	.align 5
+FEXPORT(__smtc_ipi_vector)
+	.set	noat
+	/* Disable thread scheduling to make Status update atomic */
+	DMT	27					# dmt	k1
+	ehb
+	/* Set EXL */
+	mfc0	k0,CP0_STATUS
+	ori	k0,k0,ST0_EXL
+	mtc0	k0,CP0_STATUS
+	ehb
+	/* Thread scheduling now inhibited by EXL. Restore TE state. */
+	andi	k1,k1,VPECONTROL_TE
+	beqz	k1,1f
+	emt
+1:
+	/*
+	 * The IPI sender has put some information on the anticipated
+	 * kernel stack frame.  If we were in user mode, this will be
+	 * built above the saved kernel SP.  If we were already in the
+	 * kernel, it will be built above the current CPU SP.
+	 *
+	 * Were we in kernel mode, as indicated by CU0?
+	 */
+	sll	k1,k0,3
+	.set noreorder
+	bltz	k1,2f
+	move	k1,sp
+	.set reorder
+	/*
+	 * If previously in user mode, set CU0 and use kernel stack.
+	 */
+	li	k1,ST0_CU0
+	or	k1,k1,k0
+	mtc0	k1,CP0_STATUS
+	ehb
+	get_saved_sp
+	/* Interrupting TC will have pre-set values in slots in the new frame */
+2:	subu	k1,k1,PT_SIZE
+	/* Load TCStatus Value */
+	lw	k0,PT_TCSTATUS(k1)
+	/* Write it to TCStatus to restore CU/KSU/IXMT state */
+	mtc0	k0,$2,1
+	ehb
+	lw	k0,PT_EPC(k1)
+	mtc0	k0,CP0_EPC
+	/* Save all will redundantly recompute the SP, but use it for now */
+	SAVE_ALL
+	CLI
+	move	a0,sp
+	/* Function to be invoked passed stack pad slot 5 */
+	lw	t0,PT_PADSLOT5(sp)
+	/* Argument from sender passed in stack pad slot 4 */
+	lw	a1,PT_PADSLOT4(sp)
+	jalr	t0
+	nop
+	j	ret_from_irq
+	nop
+
+/*
+ * Called from idle loop to provoke processing of queued IPIs
+ * First IPI message in queue passed as argument.
+ */
+
+LEAF(self_ipi)
+	/* Before anything else, block interrupts */
+	mfc0	t0,CP0_TCSTATUS
+	ori	t1,t0,TCSTATUS_IXMT
+	mtc0	t1,CP0_TCSTATUS
+	ehb
+	/* We know we're in kernel mode, so prepare stack frame */
+	subu	t1,sp,PT_SIZE
+	sw	ra,PT_EPC(t1)
+	sw	a0,PT_PADSLOT4(t1)
+	la	t2,ipi_decode
+	sw	t2,PT_PADSLOT5(t1)
+	/* Save pre-disable value of TCStatus */
+	sw	t0,PT_TCSTATUS(t1)
+	j	__smtc_ipi_vector
+	nop
+END(self_ipi)
diff --git a/arch/mips/kernel/smtc-proc.c b/arch/mips/kernel/smtc-proc.c
new file mode 100644
index 000000000000..6f3709996172
--- /dev/null
+++ b/arch/mips/kernel/smtc-proc.c
@@ -0,0 +1,93 @@
+/*
+ * /proc hooks for SMTC kernel
+ * Copyright (C) 2005 Mips Technologies, Inc
+ */
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/cpumask.h>
+#include <linux/interrupt.h>
+
+#include <asm/cpu.h>
+#include <asm/processor.h>
+#include <asm/atomic.h>
+#include <asm/system.h>
+#include <asm/hardirq.h>
+#include <asm/mmu_context.h>
+#include <asm/smp.h>
+#include <asm/mipsregs.h>
+#include <asm/cacheflush.h>
+#include <linux/proc_fs.h>
+
+#include <asm/smtc_proc.h>
+
+/*
+ * /proc diagnostic and statistics hooks
+ */
+
+/*
+ * Statistics gathered
+ */
+unsigned long selfipis[NR_CPUS];
+
+struct smtc_cpu_proc smtc_cpu_stats[NR_CPUS];
+
+static struct proc_dir_entry *smtc_stats;
+
+atomic_t smtc_fpu_recoveries;
+
+static int proc_read_smtc(char *page, char **start, off_t off,
+                          int count, int *eof, void *data)
+{
+	int totalen = 0;
+	int len;
+	int i;
+	extern unsigned long ebase;
+
+	len = sprintf(page, "SMTC Status Word: 0x%08x\n", smtc_status);
+	totalen += len;
+	page += len;
+	len = sprintf(page, "Config7: 0x%08x\n", read_c0_config7());
+	totalen += len;
+	page += len;
+	len = sprintf(page, "EBASE: 0x%08lx\n", ebase);
+	totalen += len;
+	page += len;
+	len = sprintf(page, "Counter Interrupts taken per CPU (TC)\n");
+	totalen += len;
+	page += len;
+	for (i=0; i < NR_CPUS; i++) {
+		len = sprintf(page, "%d: %ld\n", i, smtc_cpu_stats[i].timerints);
+		totalen += len;
+		page += len;
+	}
+	len = sprintf(page, "Self-IPIs by CPU:\n");
+	totalen += len;
+	page += len;
+	for(i = 0; i < NR_CPUS; i++) {
+		len = sprintf(page, "%d: %ld\n", i, smtc_cpu_stats[i].selfipis);
+		totalen += len;
+		page += len;
+	}
+	len = sprintf(page, "%d Recoveries of \"stolen\" FPU\n",
+	              atomic_read(&smtc_fpu_recoveries));
+	totalen += len;
+	page += len;
+
+	return totalen;
+}
+
+void init_smtc_stats(void)
+{
+	int i;
+
+	for (i=0; i<NR_CPUS; i++) {
+		smtc_cpu_stats[i].timerints = 0;
+		smtc_cpu_stats[i].selfipis = 0;
+	}
+
+	atomic_set(&smtc_fpu_recoveries, 0);
+
+	smtc_stats = create_proc_read_entry("smtc", 0444, NULL,
+	                                    proc_read_smtc, NULL);
+}
diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c
new file mode 100644
index 000000000000..2e8e52c135e6
--- /dev/null
+++ b/arch/mips/kernel/smtc.c
@@ -0,0 +1,1322 @@
+/* Copyright (C) 2004 Mips Technologies, Inc */
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/cpumask.h>
+#include <linux/interrupt.h>
+
+#include <asm/cpu.h>
+#include <asm/processor.h>
+#include <asm/atomic.h>
+#include <asm/system.h>
+#include <asm/hardirq.h>
+#include <asm/hazards.h>
+#include <asm/mmu_context.h>
+#include <asm/smp.h>
+#include <asm/mipsregs.h>
+#include <asm/cacheflush.h>
+#include <asm/time.h>
+#include <asm/addrspace.h>
+#include <asm/smtc.h>
+#include <asm/smtc_ipi.h>
+#include <asm/smtc_proc.h>
+
+/*
+ * This file should be built into the kernel only if CONFIG_MIPS_MT_SMTC is set.
+ */
+
+/*
+ * MIPSCPU_INT_BASE is identically defined in both
+ * asm-mips/mips-boards/maltaint.h and asm-mips/mips-boards/simint.h,
+ * but as yet there's no properly organized include structure that
+ * will ensure that the right *int.h file will be included for a
+ * given platform build.
+ */
+
+#define MIPSCPU_INT_BASE	16
+
+#define MIPS_CPU_IPI_IRQ	1
+
+#define LOCK_MT_PRA() \
+	local_irq_save(flags); \
+	mtflags = dmt()
+
+#define UNLOCK_MT_PRA() \
+	emt(mtflags); \
+	local_irq_restore(flags)
+
+#define LOCK_CORE_PRA() \
+	local_irq_save(flags); \
+	mtflags = dvpe()
+
+#define UNLOCK_CORE_PRA() \
+	evpe(mtflags); \
+	local_irq_restore(flags)
+
+/*
+ * Data structures purely associated with SMTC parallelism
+ */
+
+
+/*
+ * Table for tracking ASIDs whose lifetime is prolonged.
+ */
+
+asiduse smtc_live_asid[MAX_SMTC_TLBS][MAX_SMTC_ASIDS];
+
+/*
+ * Clock interrupt "latch" buffers, per "CPU"
+ */
+
+unsigned int ipi_timer_latch[NR_CPUS];
+
+/*
+ * Number of InterProcessor Interupt (IPI) message buffers to allocate
+ */
+
+#define IPIBUF_PER_CPU 4
+
+struct smtc_ipi_q IPIQ[NR_CPUS];
+struct smtc_ipi_q freeIPIq;
+
+
+/* Forward declarations */
+
+void ipi_decode(struct pt_regs *, struct smtc_ipi *);
+void post_direct_ipi(int cpu, struct smtc_ipi *pipi);
+void setup_cross_vpe_interrupts(void);
+void init_smtc_stats(void);
+
+/* Global SMTC Status */
+
+unsigned int smtc_status = 0;
+
+/* Boot command line configuration overrides */
+
+static int vpelimit = 0;
+static int tclimit = 0;
+static int ipibuffers = 0;
+static int nostlb = 0;
+static int asidmask = 0;
+unsigned long smtc_asid_mask = 0xff;
+
+static int __init maxvpes(char *str)
+{
+	get_option(&str, &vpelimit);
+	return 1;
+}
+
+static int __init maxtcs(char *str)
+{
+	get_option(&str, &tclimit);
+	return 1;
+}
+
+static int __init ipibufs(char *str)
+{
+	get_option(&str, &ipibuffers);
+	return 1;
+}
+
+static int __init stlb_disable(char *s)
+{
+	nostlb = 1;
+	return 1;
+}
+
+static int __init asidmask_set(char *str)
+{
+	get_option(&str, &asidmask);
+	switch(asidmask) {
+	case 0x1:
+	case 0x3:
+	case 0x7:
+	case 0xf:
+	case 0x1f:
+	case 0x3f:
+	case 0x7f:
+	case 0xff:
+		smtc_asid_mask = (unsigned long)asidmask;
+		break;
+	default:
+		printk("ILLEGAL ASID mask 0x%x from command line\n", asidmask);
+	}
+	return 1;
+}
+
+__setup("maxvpes=", maxvpes);
+__setup("maxtcs=", maxtcs);
+__setup("ipibufs=", ipibufs);
+__setup("nostlb", stlb_disable);
+__setup("asidmask=", asidmask_set);
+
+/* Enable additional debug checks before going into CPU idle loop */
+#define SMTC_IDLE_HOOK_DEBUG
+
+#ifdef SMTC_IDLE_HOOK_DEBUG
+
+static int hang_trig = 0;
+
+static int __init hangtrig_enable(char *s)
+{
+	hang_trig = 1;
+	return 1;
+}
+
+
+__setup("hangtrig", hangtrig_enable);
+
+#define DEFAULT_BLOCKED_IPI_LIMIT 32
+
+static int timerq_limit = DEFAULT_BLOCKED_IPI_LIMIT;
+
+static int __init tintq(char *str)
+{
+	get_option(&str, &timerq_limit);
+	return 1;
+}
+
+__setup("tintq=", tintq);
+
+int imstuckcount[2][8];
+/* vpemask represents IM/IE bits of per-VPE Status registers, low-to-high */
+int vpemask[2][8] = {{0,1,1,0,0,0,0,1},{0,1,0,0,0,0,0,1}};
+int tcnoprog[NR_CPUS];
+static atomic_t idle_hook_initialized = {0};
+static int clock_hang_reported[NR_CPUS];
+
+#endif /* SMTC_IDLE_HOOK_DEBUG */
+
+/* Initialize shared TLB - the should probably migrate to smtc_setup_cpus() */
+
+void __init sanitize_tlb_entries(void)
+{
+	printk("Deprecated sanitize_tlb_entries() invoked\n");
+}
+
+
+/*
+ * Configure shared TLB - VPC configuration bit must be set by caller
+ */
+
+void smtc_configure_tlb(void)
+{
+	int i,tlbsiz,vpes;
+	unsigned long mvpconf0;
+	unsigned long config1val;
+
+	/* Set up ASID preservation table */
+	for (vpes=0; vpes<MAX_SMTC_TLBS; vpes++) {
+	    for(i = 0; i < MAX_SMTC_ASIDS; i++) {
+		smtc_live_asid[vpes][i] = 0;
+	    }
+	}
+	mvpconf0 = read_c0_mvpconf0();
+
+	if ((vpes = ((mvpconf0 & MVPCONF0_PVPE)
+			>> MVPCONF0_PVPE_SHIFT) + 1) > 1) {
+	    /* If we have multiple VPEs, try to share the TLB */
+	    if ((mvpconf0 & MVPCONF0_TLBS) && !nostlb) {
+		/*
+		 * If TLB sizing is programmable, shared TLB
+		 * size is the total available complement.
+		 * Otherwise, we have to take the sum of all
+		 * static VPE TLB entries.
+		 */
+		if ((tlbsiz = ((mvpconf0 & MVPCONF0_PTLBE)
+				>> MVPCONF0_PTLBE_SHIFT)) == 0) {
+		    /*
+		     * If there's more than one VPE, there had better
+		     * be more than one TC, because we need one to bind
+		     * to each VPE in turn to be able to read
+		     * its configuration state!
+		     */
+		    settc(1);
+		    /* Stop the TC from doing anything foolish */
+		    write_tc_c0_tchalt(TCHALT_H);
+		    mips_ihb();
+		    /* No need to un-Halt - that happens later anyway */
+		    for (i=0; i < vpes; i++) {
+		    	write_tc_c0_tcbind(i);
+			/*
+			 * To be 100% sure we're really getting the right
+			 * information, we exit the configuration state
+			 * and do an IHB after each rebinding.
+			 */
+			write_c0_mvpcontrol(
+				read_c0_mvpcontrol() & ~ MVPCONTROL_VPC );
+			mips_ihb();
+			/*
+			 * Only count if the MMU Type indicated is TLB
+			 */
+			if(((read_vpe_c0_config() & MIPS_CONF_MT) >> 7) == 1) {
+				config1val = read_vpe_c0_config1();
+				tlbsiz += ((config1val >> 25) & 0x3f) + 1;
+			}
+
+			/* Put core back in configuration state */
+			write_c0_mvpcontrol(
+				read_c0_mvpcontrol() | MVPCONTROL_VPC );
+			mips_ihb();
+		    }
+		}
+		write_c0_mvpcontrol(read_c0_mvpcontrol() | MVPCONTROL_STLB);
+
+		/*
+		 * Setup kernel data structures to use software total,
+		 * rather than read the per-VPE Config1 value. The values
+		 * for "CPU 0" gets copied to all the other CPUs as part
+		 * of their initialization in smtc_cpu_setup().
+		 */
+
+		tlbsiz = tlbsiz & 0x3f;	/* MIPS32 limits TLB indices to 64 */
+		cpu_data[0].tlbsize = tlbsiz;
+		smtc_status |= SMTC_TLB_SHARED;
+
+		printk("TLB of %d entry pairs shared by %d VPEs\n",
+			tlbsiz, vpes);
+	    } else {
+		printk("WARNING: TLB Not Sharable on SMTC Boot!\n");
+	    }
+	}
+}
+
+
+/*
+ * Incrementally build the CPU map out of constituent MIPS MT cores,
+ * using the specified available VPEs and TCs.  Plaform code needs
+ * to ensure that each MIPS MT core invokes this routine on reset,
+ * one at a time(!).
+ *
+ * This version of the build_cpu_map and prepare_cpus routines assumes
+ * that *all* TCs of a MIPS MT core will be used for Linux, and that
+ * they will be spread across *all* available VPEs (to minimise the
+ * loss of efficiency due to exception service serialization).
+ * An improved version would pick up configuration information and
+ * possibly leave some TCs/VPEs as "slave" processors.
+ *
+ * Use c0_MVPConf0 to find out how many TCs are available, setting up
+ * phys_cpu_present_map and the logical/physical mappings.
+ */
+
+int __init mipsmt_build_cpu_map(int start_cpu_slot)
+{
+	int i, ntcs;
+
+	/*
+	 * The CPU map isn't actually used for anything at this point,
+	 * so it's not clear what else we should do apart from set
+	 * everything up so that "logical" = "physical".
+	 */
+	ntcs = ((read_c0_mvpconf0() & MVPCONF0_PTC) >> MVPCONF0_PTC_SHIFT) + 1;
+	for (i=start_cpu_slot; i<NR_CPUS && i<ntcs; i++) {
+		cpu_set(i, phys_cpu_present_map);
+		__cpu_number_map[i] = i;
+		__cpu_logical_map[i] = i;
+	}
+	/* Initialize map of CPUs with FPUs */
+	cpus_clear(mt_fpu_cpumask);
+
+	/* One of those TC's is the one booting, and not a secondary... */
+	printk("%i available secondary CPU TC(s)\n", i - 1);
+
+	return i;
+}
+
+/*
+ * Common setup before any secondaries are started
+ * Make sure all CPU's are in a sensible state before we boot any of the
+ * secondaries.
+ *
+ * For MIPS MT "SMTC" operation, we set up all TCs, spread as evenly
+ * as possible across the available VPEs.
+ */
+
+static void smtc_tc_setup(int vpe, int tc, int cpu)
+{
+	settc(tc);
+	write_tc_c0_tchalt(TCHALT_H);
+	mips_ihb();
+	write_tc_c0_tcstatus((read_tc_c0_tcstatus()
+			& ~(TCSTATUS_TKSU | TCSTATUS_DA | TCSTATUS_IXMT))
+			| TCSTATUS_A);
+	write_tc_c0_tccontext(0);
+	/* Bind tc to vpe */
+	write_tc_c0_tcbind(vpe);
+	/* In general, all TCs should have the same cpu_data indications */
+	memcpy(&cpu_data[cpu], &cpu_data[0], sizeof(struct cpuinfo_mips));
+	/* For 34Kf, start with TC/CPU 0 as sole owner of single FPU context */
+	if (cpu_data[0].cputype == CPU_34K)
+		cpu_data[cpu].options &= ~MIPS_CPU_FPU;
+	cpu_data[cpu].vpe_id = vpe;
+	cpu_data[cpu].tc_id = tc;
+}
+
+
+void mipsmt_prepare_cpus(void)
+{
+	int i, vpe, tc, ntc, nvpe, tcpervpe, slop, cpu;
+	unsigned long flags;
+	unsigned long val;
+	int nipi;
+	struct smtc_ipi *pipi;
+
+	/* disable interrupts so we can disable MT */
+	local_irq_save(flags);
+	/* disable MT so we can configure */
+	dvpe();
+	dmt();
+
+	freeIPIq.lock = SPIN_LOCK_UNLOCKED;
+
+	/*
+	 * We probably don't have as many VPEs as we do SMP "CPUs",
+	 * but it's possible - and in any case we'll never use more!
+	 */
+	for (i=0; i<NR_CPUS; i++) {
+		IPIQ[i].head = IPIQ[i].tail = NULL;
+		IPIQ[i].lock = SPIN_LOCK_UNLOCKED;
+		IPIQ[i].depth = 0;
+		ipi_timer_latch[i] = 0;
+	}
+
+	/* cpu_data index starts at zero */
+	cpu = 0;
+	cpu_data[cpu].vpe_id = 0;
+	cpu_data[cpu].tc_id = 0;
+	cpu++;
+
+	/* Report on boot-time options */
+	mips_mt_set_cpuoptions ();
+	if (vpelimit > 0)
+		printk("Limit of %d VPEs set\n", vpelimit);
+	if (tclimit > 0)
+		printk("Limit of %d TCs set\n", tclimit);
+	if (nostlb) {
+		printk("Shared TLB Use Inhibited - UNSAFE for Multi-VPE Operation\n");
+	}
+	if (asidmask)
+		printk("ASID mask value override to 0x%x\n", asidmask);
+
+	/* Temporary */
+#ifdef SMTC_IDLE_HOOK_DEBUG
+	if (hang_trig)
+		printk("Logic Analyser Trigger on suspected TC hang\n");
+#endif /* SMTC_IDLE_HOOK_DEBUG */
+
+	/* Put MVPE's into 'configuration state' */
+	write_c0_mvpcontrol( read_c0_mvpcontrol() | MVPCONTROL_VPC );
+
+	val = read_c0_mvpconf0();
+	nvpe = ((val & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT) + 1;
+	if (vpelimit > 0 && nvpe > vpelimit)
+		nvpe = vpelimit;
+	ntc = ((val & MVPCONF0_PTC) >> MVPCONF0_PTC_SHIFT) + 1;
+	if (ntc > NR_CPUS)
+		ntc = NR_CPUS;
+	if (tclimit > 0 && ntc > tclimit)
+		ntc = tclimit;
+	tcpervpe = ntc / nvpe;
+	slop = ntc % nvpe;	/* Residual TCs, < NVPE */
+
+	/* Set up shared TLB */
+	smtc_configure_tlb();
+
+	for (tc = 0, vpe = 0 ; (vpe < nvpe) && (tc < ntc) ; vpe++) {
+		/*
+		 * Set the MVP bits.
+		 */
+		settc(tc);
+		write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() | VPECONF0_MVP);
+		if (vpe != 0)
+			printk(", ");
+		printk("VPE %d: TC", vpe);
+		for (i = 0; i < tcpervpe; i++) {
+			/*
+			 * TC 0 is bound to VPE 0 at reset,
+			 * and is presumably executing this
+			 * code.  Leave it alone!
+			 */
+			if (tc != 0) {
+				smtc_tc_setup(vpe,tc, cpu);
+				cpu++;
+			}
+			printk(" %d", tc);
+			tc++;
+		}
+		if (slop) {
+			if (tc != 0) {
+				smtc_tc_setup(vpe,tc, cpu);
+				cpu++;
+			}
+			printk(" %d", tc);
+			tc++;
+			slop--;
+		}
+		if (vpe != 0) {
+			/*
+			 * Clear any stale software interrupts from VPE's Cause
+			 */
+			write_vpe_c0_cause(0);
+
+			/*
+			 * Clear ERL/EXL of VPEs other than 0
+			 * and set restricted interrupt enable/mask.
+			 */
+			write_vpe_c0_status((read_vpe_c0_status()
+				& ~(ST0_BEV | ST0_ERL | ST0_EXL | ST0_IM))
+				| (STATUSF_IP0 | STATUSF_IP1 | STATUSF_IP7
+				| ST0_IE));
+			/*
+			 * set config to be the same as vpe0,
+			 *  particularly kseg0 coherency alg
+			 */
+			write_vpe_c0_config(read_c0_config());
+			/* Clear any pending timer interrupt */
+			write_vpe_c0_compare(0);
+			/* Propagate Config7 */
+			write_vpe_c0_config7(read_c0_config7());
+		}
+		/* enable multi-threading within VPE */
+		write_vpe_c0_vpecontrol(read_vpe_c0_vpecontrol() | VPECONTROL_TE);
+		/* enable the VPE */
+		write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() | VPECONF0_VPA);
+	}
+
+	/*
+	 * Pull any physically present but unused TCs out of circulation.
+	 */
+	while (tc < (((val & MVPCONF0_PTC) >> MVPCONF0_PTC_SHIFT) + 1)) {
+		cpu_clear(tc, phys_cpu_present_map);
+		cpu_clear(tc, cpu_present_map);
+		tc++;
+	}
+
+	/* release config state */
+	write_c0_mvpcontrol( read_c0_mvpcontrol() & ~ MVPCONTROL_VPC );
+
+	printk("\n");
+
+	/* Set up coprocessor affinity CPU mask(s) */
+
+	for (tc = 0; tc < ntc; tc++) {
+		if(cpu_data[tc].options & MIPS_CPU_FPU)
+			cpu_set(tc, mt_fpu_cpumask);
+	}
+
+	/* set up ipi interrupts... */
+
+	/* If we have multiple VPEs running, set up the cross-VPE interrupt */
+
+	if (nvpe > 1)
+		setup_cross_vpe_interrupts();
+
+	/* Set up queue of free IPI "messages". */
+	nipi = NR_CPUS * IPIBUF_PER_CPU;
+	if (ipibuffers > 0)
+		nipi = ipibuffers;
+
+	pipi = kmalloc(nipi *sizeof(struct smtc_ipi), GFP_KERNEL);
+	if (pipi == NULL)
+		panic("kmalloc of IPI message buffers failed\n");
+	else
+		printk("IPI buffer pool of %d buffers\n", nipi);
+	for (i = 0; i < nipi; i++) {
+		smtc_ipi_nq(&freeIPIq, pipi);
+		pipi++;
+	}
+
+	/* Arm multithreading and enable other VPEs - but all TCs are Halted */
+	emt(EMT_ENABLE);
+	evpe(EVPE_ENABLE);
+	local_irq_restore(flags);
+	/* Initialize SMTC /proc statistics/diagnostics */
+	init_smtc_stats();
+}
+
+
+/*
+ * Setup the PC, SP, and GP of a secondary processor and start it
+ * running!
+ * smp_bootstrap is the place to resume from
+ * __KSTK_TOS(idle) is apparently the stack pointer
+ * (unsigned long)idle->thread_info the gp
+ *
+ */
+void smtc_boot_secondary(int cpu, struct task_struct *idle)
+{
+	extern u32 kernelsp[NR_CPUS];
+	long flags;
+	int mtflags;
+
+	LOCK_MT_PRA();
+	if (cpu_data[cpu].vpe_id != cpu_data[smp_processor_id()].vpe_id) {
+		dvpe();
+	}
+	settc(cpu_data[cpu].tc_id);
+
+	/* pc */
+	write_tc_c0_tcrestart((unsigned long)&smp_bootstrap);
+
+	/* stack pointer */
+	kernelsp[cpu] = __KSTK_TOS(idle);
+	write_tc_gpr_sp(__KSTK_TOS(idle));
+
+	/* global pointer */
+	write_tc_gpr_gp((unsigned long)idle->thread_info);
+
+	smtc_status |= SMTC_MTC_ACTIVE;
+	write_tc_c0_tchalt(0);
+	if (cpu_data[cpu].vpe_id != cpu_data[smp_processor_id()].vpe_id) {
+		evpe(EVPE_ENABLE);
+	}
+	UNLOCK_MT_PRA();
+}
+
+void smtc_init_secondary(void)
+{
+	/*
+	 * Start timer on secondary VPEs if necessary.
+	 * mips_timer_setup should already have been invoked by init/main
+	 * on "boot" TC.  Like per_cpu_trap_init() hack, this assumes that
+	 * SMTC init code assigns TCs consdecutively and in ascending order
+	 * to across available VPEs.
+	 */
+	if(((read_c0_tcbind() & TCBIND_CURTC) != 0)
+	&& ((read_c0_tcbind() & TCBIND_CURVPE)
+	    != cpu_data[smp_processor_id() - 1].vpe_id)){
+		write_c0_compare (read_c0_count() + mips_hpt_frequency/HZ);
+	}
+
+	local_irq_enable();
+}
+
+void smtc_smp_finish(void)
+{
+	printk("TC %d going on-line as CPU %d\n",
+		cpu_data[smp_processor_id()].tc_id, smp_processor_id());
+}
+
+void smtc_cpus_done(void)
+{
+}
+
+/*
+ * Support for SMTC-optimized driver IRQ registration
+ */
+
+/*
+ * SMTC Kernel needs to manipulate low-level CPU interrupt mask
+ * in do_IRQ. These are passed in setup_irq_smtc() and stored
+ * in this table.
+ */
+
+int setup_irq_smtc(unsigned int irq, struct irqaction * new,
+			unsigned long hwmask)
+{
+	irq_hwmask[irq] = hwmask;
+
+	return setup_irq(irq, new);
+}
+
+/*
+ * IPI model for SMTC is tricky, because interrupts aren't TC-specific.
+ * Within a VPE one TC can interrupt another by different approaches.
+ * The easiest to get right would probably be to make all TCs except
+ * the target IXMT and set a software interrupt, but an IXMT-based
+ * scheme requires that a handler must run before a new IPI could
+ * be sent, which would break the "broadcast" loops in MIPS MT.
+ * A more gonzo approach within a VPE is to halt the TC, extract
+ * its Restart, Status, and a couple of GPRs, and program the Restart
+ * address to emulate an interrupt.
+ *
+ * Within a VPE, one can be confident that the target TC isn't in
+ * a critical EXL state when halted, since the write to the Halt
+ * register could not have issued on the writing thread if the
+ * halting thread had EXL set. So k0 and k1 of the target TC
+ * can be used by the injection code.  Across VPEs, one can't
+ * be certain that the target TC isn't in a critical exception
+ * state. So we try a two-step process of sending a software
+ * interrupt to the target VPE, which either handles the event
+ * itself (if it was the target) or injects the event within
+ * the VPE.
+ */
+
+void smtc_ipi_qdump(void)
+{
+	int i;
+
+	for (i = 0; i < NR_CPUS ;i++) {
+		printk("IPIQ[%d]: head = 0x%x, tail = 0x%x, depth = %d\n",
+			i, (unsigned)IPIQ[i].head, (unsigned)IPIQ[i].tail,
+			IPIQ[i].depth);
+	}
+}
+
+/*
+ * The standard atomic.h primitives don't quite do what we want
+ * here: We need an atomic add-and-return-previous-value (which
+ * could be done with atomic_add_return and a decrement) and an
+ * atomic set/zero-and-return-previous-value (which can't really
+ * be done with the atomic.h primitives). And since this is
+ * MIPS MT, we can assume that we have LL/SC.
+ */
+static __inline__ int atomic_postincrement(unsigned int *pv)
+{
+	unsigned long result;
+
+	unsigned long temp;
+
+	__asm__ __volatile__(
+	"1:	ll	%0, %2					\n"
+	"	addu	%1, %0, 1				\n"
+	"	sc	%1, %2					\n"
+	"	beqz	%1, 1b					\n"
+	"	sync						\n"
+	: "=&r" (result), "=&r" (temp), "=m" (*pv)
+	: "m" (*pv)
+	: "memory");
+
+	return result;
+}
+
+/* No longer used in IPI dispatch, but retained for future recycling */
+
+static __inline__ int atomic_postclear(unsigned int *pv)
+{
+	unsigned long result;
+
+	unsigned long temp;
+
+	__asm__ __volatile__(
+	"1:	ll	%0, %2					\n"
+	"	or	%1, $0, $0				\n"
+	"	sc	%1, %2					\n"
+	"	beqz	%1, 1b					\n"
+	"	sync						\n"
+	: "=&r" (result), "=&r" (temp), "=m" (*pv)
+	: "m" (*pv)
+	: "memory");
+
+	return result;
+}
+
+
+void smtc_send_ipi(int cpu, int type, unsigned int action)
+{
+	int tcstatus;
+	struct smtc_ipi *pipi;
+	long flags;
+	int mtflags;
+
+	if (cpu == smp_processor_id()) {
+		printk("Cannot Send IPI to self!\n");
+		return;
+	}
+	/* Set up a descriptor, to be delivered either promptly or queued */
+	pipi = smtc_ipi_dq(&freeIPIq);
+	if (pipi == NULL) {
+		bust_spinlocks(1);
+		mips_mt_regdump(dvpe());
+		panic("IPI Msg. Buffers Depleted\n");
+	}
+	pipi->type = type;
+	pipi->arg = (void *)action;
+	pipi->dest = cpu;
+	if (cpu_data[cpu].vpe_id != cpu_data[smp_processor_id()].vpe_id) {
+		/* If not on same VPE, enqueue and send cross-VPE interupt */
+		smtc_ipi_nq(&IPIQ[cpu], pipi);
+		LOCK_CORE_PRA();
+		settc(cpu_data[cpu].tc_id);
+		write_vpe_c0_cause(read_vpe_c0_cause() | C_SW1);
+		UNLOCK_CORE_PRA();
+	} else {
+		/*
+		 * Not sufficient to do a LOCK_MT_PRA (dmt) here,
+		 * since ASID shootdown on the other VPE may
+		 * collide with this operation.
+		 */
+		LOCK_CORE_PRA();
+		settc(cpu_data[cpu].tc_id);
+		/* Halt the targeted TC */
+		write_tc_c0_tchalt(TCHALT_H);
+		mips_ihb();
+
+		/*
+	 	 * Inspect TCStatus - if IXMT is set, we have to queue
+		 * a message. Otherwise, we set up the "interrupt"
+		 * of the other TC
+	 	 */
+		tcstatus = read_tc_c0_tcstatus();
+
+		if ((tcstatus & TCSTATUS_IXMT) != 0) {
+			/*
+			 * Spin-waiting here can deadlock,
+			 * so we queue the message for the target TC.
+			 */
+			write_tc_c0_tchalt(0);
+			UNLOCK_CORE_PRA();
+			/* Try to reduce redundant timer interrupt messages */
+			if(type == SMTC_CLOCK_TICK) {
+			    if(atomic_postincrement(&ipi_timer_latch[cpu])!=0) {
+				smtc_ipi_nq(&freeIPIq, pipi);
+				return;
+			    }
+			}
+			smtc_ipi_nq(&IPIQ[cpu], pipi);
+		} else {
+			post_direct_ipi(cpu, pipi);
+			write_tc_c0_tchalt(0);
+			UNLOCK_CORE_PRA();
+		}
+	}
+}
+
+/*
+ * Send IPI message to Halted TC, TargTC/TargVPE already having been set
+ */
+void post_direct_ipi(int cpu, struct smtc_ipi *pipi)
+{
+	struct pt_regs *kstack;
+	unsigned long tcstatus;
+	unsigned long tcrestart;
+	extern u32 kernelsp[NR_CPUS];
+	extern void __smtc_ipi_vector(void);
+
+	/* Extract Status, EPC from halted TC */
+	tcstatus = read_tc_c0_tcstatus();
+	tcrestart = read_tc_c0_tcrestart();
+	/* If TCRestart indicates a WAIT instruction, advance the PC */
+	if ((tcrestart & 0x80000000)
+	    && ((*(unsigned int *)tcrestart & 0xfe00003f) == 0x42000020)) {
+		tcrestart += 4;
+	}
+	/*
+	 * Save on TC's future kernel stack
+	 *
+	 * CU bit of Status is indicator that TC was
+	 * already running on a kernel stack...
+	 */
+	if(tcstatus & ST0_CU0)  {
+		/* Note that this "- 1" is pointer arithmetic */
+		kstack = ((struct pt_regs *)read_tc_gpr_sp()) - 1;
+	} else {
+		kstack = ((struct pt_regs *)kernelsp[cpu]) - 1;
+	}
+
+	kstack->cp0_epc = (long)tcrestart;
+	/* Save TCStatus */
+	kstack->cp0_tcstatus = tcstatus;
+	/* Pass token of operation to be performed kernel stack pad area */
+	kstack->pad0[4] = (unsigned long)pipi;
+	/* Pass address of function to be called likewise */
+	kstack->pad0[5] = (unsigned long)&ipi_decode;
+	/* Set interrupt exempt and kernel mode */
+	tcstatus |= TCSTATUS_IXMT;
+	tcstatus &= ~TCSTATUS_TKSU;
+	write_tc_c0_tcstatus(tcstatus);
+	ehb();
+	/* Set TC Restart address to be SMTC IPI vector */
+	write_tc_c0_tcrestart(__smtc_ipi_vector);
+}
+
+void ipi_resched_interrupt(struct pt_regs *regs)
+{
+	/* Return from interrupt should be enough to cause scheduler check */
+}
+
+
+void ipi_call_interrupt(struct pt_regs *regs)
+{
+	/* Invoke generic function invocation code in smp.c */
+	smp_call_function_interrupt();
+}
+
+void ipi_decode(struct pt_regs *regs, struct smtc_ipi *pipi)
+{
+	void *arg_copy = pipi->arg;
+	int type_copy = pipi->type;
+	int dest_copy = pipi->dest;
+
+	smtc_ipi_nq(&freeIPIq, pipi);
+	switch (type_copy) {
+		case SMTC_CLOCK_TICK:
+			/* Invoke Clock "Interrupt" */
+			ipi_timer_latch[dest_copy] = 0;
+#ifdef SMTC_IDLE_HOOK_DEBUG
+			clock_hang_reported[dest_copy] = 0;
+#endif /* SMTC_IDLE_HOOK_DEBUG */
+			local_timer_interrupt(0, NULL, regs);
+			break;
+		case LINUX_SMP_IPI:
+			switch ((int)arg_copy) {
+			case SMP_RESCHEDULE_YOURSELF:
+				ipi_resched_interrupt(regs);
+				break;
+			case SMP_CALL_FUNCTION:
+				ipi_call_interrupt(regs);
+				break;
+			default:
+				printk("Impossible SMTC IPI Argument 0x%x\n",
+					(int)arg_copy);
+				break;
+			}
+			break;
+		default:
+			printk("Impossible SMTC IPI Type 0x%x\n", type_copy);
+			break;
+	}
+}
+
+void deferred_smtc_ipi(struct pt_regs *regs)
+{
+	struct smtc_ipi *pipi;
+	unsigned long flags;
+/* DEBUG */
+	int q = smp_processor_id();
+
+	/*
+	 * Test is not atomic, but much faster than a dequeue,
+	 * and the vast majority of invocations will have a null queue.
+	 */
+	if(IPIQ[q].head != NULL) {
+		while((pipi = smtc_ipi_dq(&IPIQ[q])) != NULL) {
+			/* ipi_decode() should be called with interrupts off */
+			local_irq_save(flags);
+			ipi_decode(regs, pipi);
+			local_irq_restore(flags);
+		}
+	}
+}
+
+/*
+ * Send clock tick to all TCs except the one executing the funtion
+ */
+
+void smtc_timer_broadcast(int vpe)
+{
+	int cpu;
+	int myTC = cpu_data[smp_processor_id()].tc_id;
+	int myVPE = cpu_data[smp_processor_id()].vpe_id;
+
+	smtc_cpu_stats[smp_processor_id()].timerints++;
+
+	for_each_online_cpu(cpu) {
+		if (cpu_data[cpu].vpe_id == myVPE &&
+		    cpu_data[cpu].tc_id != myTC)
+			smtc_send_ipi(cpu, SMTC_CLOCK_TICK, 0);
+	}
+}
+
+/*
+ * Cross-VPE interrupts in the SMTC prototype use "software interrupts"
+ * set via cross-VPE MTTR manipulation of the Cause register. It would be
+ * in some regards preferable to have external logic for "doorbell" hardware
+ * interrupts.
+ */
+
+static int cpu_ipi_irq = MIPSCPU_INT_BASE + MIPS_CPU_IPI_IRQ;
+
+static irqreturn_t ipi_interrupt(int irq, void *dev_idm, struct pt_regs *regs)
+{
+	int my_vpe = cpu_data[smp_processor_id()].vpe_id;
+	int my_tc = cpu_data[smp_processor_id()].tc_id;
+	int cpu;
+	struct smtc_ipi *pipi;
+	unsigned long tcstatus;
+	int sent;
+	long flags;
+	unsigned int mtflags;
+	unsigned int vpflags;
+
+	/*
+	 * So long as cross-VPE interrupts are done via
+	 * MFTR/MTTR read-modify-writes of Cause, we need
+	 * to stop other VPEs whenever the local VPE does
+	 * anything similar.
+	 */
+	local_irq_save(flags);
+	vpflags = dvpe();
+	clear_c0_cause(0x100 << MIPS_CPU_IPI_IRQ);
+	set_c0_status(0x100 << MIPS_CPU_IPI_IRQ);
+	irq_enable_hazard();
+	evpe(vpflags);
+	local_irq_restore(flags);
+
+	/*
+	 * Cross-VPE Interrupt handler: Try to directly deliver IPIs
+	 * queued for TCs on this VPE other than the current one.
+	 * Return-from-interrupt should cause us to drain the queue
+	 * for the current TC, so we ought not to have to do it explicitly here.
+	 */
+
+	for_each_online_cpu(cpu) {
+		if (cpu_data[cpu].vpe_id != my_vpe)
+			continue;
+
+		pipi = smtc_ipi_dq(&IPIQ[cpu]);
+		if (pipi != NULL) {
+			if (cpu_data[cpu].tc_id != my_tc) {
+				sent = 0;
+				LOCK_MT_PRA();
+				settc(cpu_data[cpu].tc_id);
+				write_tc_c0_tchalt(TCHALT_H);
+				mips_ihb();
+				tcstatus = read_tc_c0_tcstatus();
+				if ((tcstatus & TCSTATUS_IXMT) == 0) {
+					post_direct_ipi(cpu, pipi);
+					sent = 1;
+				}
+				write_tc_c0_tchalt(0);
+				UNLOCK_MT_PRA();
+				if (!sent) {
+					smtc_ipi_req(&IPIQ[cpu], pipi);
+				}
+			} else {
+				/*
+				 * ipi_decode() should be called
+				 * with interrupts off
+				 */
+				local_irq_save(flags);
+				ipi_decode(regs, pipi);
+				local_irq_restore(flags);
+			}
+		}
+	}
+
+	return IRQ_HANDLED;
+}
+
+static void ipi_irq_dispatch(struct pt_regs *regs)
+{
+	do_IRQ(cpu_ipi_irq, regs);
+}
+
+static struct irqaction irq_ipi;
+
+void setup_cross_vpe_interrupts(void)
+{
+	if (!cpu_has_vint)
+		panic("SMTC Kernel requires Vectored Interupt support");
+
+	set_vi_handler(MIPS_CPU_IPI_IRQ, ipi_irq_dispatch);
+
+	irq_ipi.handler = ipi_interrupt;
+	irq_ipi.flags = SA_INTERRUPT;
+	irq_ipi.name = "SMTC_IPI";
+
+	setup_irq_smtc(cpu_ipi_irq, &irq_ipi, (0x100 << MIPS_CPU_IPI_IRQ));
+
+	irq_desc[cpu_ipi_irq].status |= IRQ_PER_CPU;
+}
+
+/*
+ * SMTC-specific hacks invoked from elsewhere in the kernel.
+ */
+
+void smtc_idle_loop_hook(void)
+{
+#ifdef SMTC_IDLE_HOOK_DEBUG
+	int im;
+	int flags;
+	int mtflags;
+	int bit;
+	int vpe;
+	int tc;
+	int hook_ntcs;
+	/*
+	 * printk within DMT-protected regions can deadlock,
+	 * so buffer diagnostic messages for later output.
+	 */
+	char *pdb_msg;
+	char id_ho_db_msg[768]; /* worst-case use should be less than 700 */
+
+	if (atomic_read(&idle_hook_initialized) == 0) { /* fast test */
+		if (atomic_add_return(1, &idle_hook_initialized) == 1) {
+			int mvpconf0;
+			/* Tedious stuff to just do once */
+			mvpconf0 = read_c0_mvpconf0();
+			hook_ntcs = ((mvpconf0 & MVPCONF0_PTC) >> MVPCONF0_PTC_SHIFT) + 1;
+			if (hook_ntcs > NR_CPUS)
+				hook_ntcs = NR_CPUS;
+			for (tc = 0; tc < hook_ntcs; tc++) {
+				tcnoprog[tc] = 0;
+				clock_hang_reported[tc] = 0;
+	    		}
+			for (vpe = 0; vpe < 2; vpe++)
+				for (im = 0; im < 8; im++)
+					imstuckcount[vpe][im] = 0;
+			printk("Idle loop test hook initialized for %d TCs\n", hook_ntcs);
+			atomic_set(&idle_hook_initialized, 1000);
+		} else {
+			/* Someone else is initializing in parallel - let 'em finish */
+			while (atomic_read(&idle_hook_initialized) < 1000)
+				;
+		}
+	}
+
+	/* Have we stupidly left IXMT set somewhere? */
+	if (read_c0_tcstatus() & 0x400) {
+		write_c0_tcstatus(read_c0_tcstatus() & ~0x400);
+		ehb();
+		printk("Dangling IXMT in cpu_idle()\n");
+	}
+
+	/* Have we stupidly left an IM bit turned off? */
+#define IM_LIMIT 2000
+	local_irq_save(flags);
+	mtflags = dmt();
+	pdb_msg = &id_ho_db_msg[0];
+	im = read_c0_status();
+	vpe = cpu_data[smp_processor_id()].vpe_id;
+	for (bit = 0; bit < 8; bit++) {
+		/*
+		 * In current prototype, I/O interrupts
+		 * are masked for VPE > 0
+		 */
+		if (vpemask[vpe][bit]) {
+			if (!(im & (0x100 << bit)))
+				imstuckcount[vpe][bit]++;
+			else
+				imstuckcount[vpe][bit] = 0;
+			if (imstuckcount[vpe][bit] > IM_LIMIT) {
+				set_c0_status(0x100 << bit);
+				ehb();
+				imstuckcount[vpe][bit] = 0;
+				pdb_msg += sprintf(pdb_msg,
+					"Dangling IM %d fixed for VPE %d\n", bit,
+					vpe);
+			}
+		}
+	}
+
+	/*
+	 * Now that we limit outstanding timer IPIs, check for hung TC
+	 */
+	for (tc = 0; tc < NR_CPUS; tc++) {
+		/* Don't check ourself - we'll dequeue IPIs just below */
+		if ((tc != smp_processor_id()) &&
+		    ipi_timer_latch[tc] > timerq_limit) {
+		    if (clock_hang_reported[tc] == 0) {
+			pdb_msg += sprintf(pdb_msg,
+				"TC %d looks hung with timer latch at %d\n",
+				tc, ipi_timer_latch[tc]);
+			clock_hang_reported[tc]++;
+			}
+		}
+	}
+	emt(mtflags);
+	local_irq_restore(flags);
+	if (pdb_msg != &id_ho_db_msg[0])
+		printk("CPU%d: %s", smp_processor_id(), id_ho_db_msg);
+#endif /* SMTC_IDLE_HOOK_DEBUG */
+	/*
+	 * To the extent that we've ever turned interrupts off,
+	 * we may have accumulated deferred IPIs.  This is subtle.
+	 * If we use the smtc_ipi_qdepth() macro, we'll get an
+	 * exact number - but we'll also disable interrupts
+	 * and create a window of failure where a new IPI gets
+	 * queued after we test the depth but before we re-enable
+	 * interrupts. So long as IXMT never gets set, however,
+	 * we should be OK:  If we pick up something and dispatch
+	 * it here, that's great. If we see nothing, but concurrent
+	 * with this operation, another TC sends us an IPI, IXMT
+	 * is clear, and we'll handle it as a real pseudo-interrupt
+	 * and not a pseudo-pseudo interrupt.
+	 */
+	if (IPIQ[smp_processor_id()].depth > 0) {
+		struct smtc_ipi *pipi;
+		extern void self_ipi(struct smtc_ipi *);
+
+		if ((pipi = smtc_ipi_dq(&IPIQ[smp_processor_id()])) != NULL) {
+			self_ipi(pipi);
+			smtc_cpu_stats[smp_processor_id()].selfipis++;
+		}
+	}
+}
+
+void smtc_soft_dump(void)
+{
+	int i;
+
+	printk("Counter Interrupts taken per CPU (TC)\n");
+	for (i=0; i < NR_CPUS; i++) {
+		printk("%d: %ld\n", i, smtc_cpu_stats[i].timerints);
+	}
+	printk("Self-IPI invocations:\n");
+	for (i=0; i < NR_CPUS; i++) {
+		printk("%d: %ld\n", i, smtc_cpu_stats[i].selfipis);
+	}
+	smtc_ipi_qdump();
+	printk("Timer IPI Backlogs:\n");
+	for (i=0; i < NR_CPUS; i++) {
+		printk("%d: %d\n", i, ipi_timer_latch[i]);
+	}
+	printk("%d Recoveries of \"stolen\" FPU\n",
+	       atomic_read(&smtc_fpu_recoveries));
+}
+
+
+/*
+ * TLB management routines special to SMTC
+ */
+
+void smtc_get_new_mmu_context(struct mm_struct *mm, unsigned long cpu)
+{
+	unsigned long flags, mtflags, tcstat, prevhalt, asid;
+	int tlb, i;
+
+	/*
+	 * It would be nice to be able to use a spinlock here,
+	 * but this is invoked from within TLB flush routines
+	 * that protect themselves with DVPE, so if a lock is
+         * held by another TC, it'll never be freed.
+	 *
+	 * DVPE/DMT must not be done with interrupts enabled,
+	 * so even so most callers will already have disabled
+	 * them, let's be really careful...
+	 */
+
+	local_irq_save(flags);
+	if (smtc_status & SMTC_TLB_SHARED) {
+		mtflags = dvpe();
+		tlb = 0;
+	} else {
+		mtflags = dmt();
+		tlb = cpu_data[cpu].vpe_id;
+	}
+	asid = asid_cache(cpu);
+
+	do {
+		if (!((asid += ASID_INC) & ASID_MASK) ) {
+			if (cpu_has_vtag_icache)
+				flush_icache_all();
+			/* Traverse all online CPUs (hack requires contigous range) */
+			for (i = 0; i < num_online_cpus(); i++) {
+				/*
+				 * We don't need to worry about our own CPU, nor those of
+				 * CPUs who don't share our TLB.
+				 */
+				if ((i != smp_processor_id()) &&
+				    ((smtc_status & SMTC_TLB_SHARED) ||
+				     (cpu_data[i].vpe_id == cpu_data[cpu].vpe_id))) {
+					settc(cpu_data[i].tc_id);
+					prevhalt = read_tc_c0_tchalt() & TCHALT_H;
+					if (!prevhalt) {
+						write_tc_c0_tchalt(TCHALT_H);
+						mips_ihb();
+					}
+					tcstat = read_tc_c0_tcstatus();
+					smtc_live_asid[tlb][(tcstat & ASID_MASK)] |= (asiduse)(0x1 << i);
+					if (!prevhalt)
+						write_tc_c0_tchalt(0);
+				}
+			}
+			if (!asid)		/* fix version if needed */
+				asid = ASID_FIRST_VERSION;
+			local_flush_tlb_all();	/* start new asid cycle */
+		}
+	} while (smtc_live_asid[tlb][(asid & ASID_MASK)]);
+
+	/*
+	 * SMTC shares the TLB within VPEs and possibly across all VPEs.
+	 */
+	for (i = 0; i < num_online_cpus(); i++) {
+		if ((smtc_status & SMTC_TLB_SHARED) ||
+		    (cpu_data[i].vpe_id == cpu_data[cpu].vpe_id))
+			cpu_context(i, mm) = asid_cache(i) = asid;
+	}
+
+	if (smtc_status & SMTC_TLB_SHARED)
+		evpe(mtflags);
+	else
+		emt(mtflags);
+	local_irq_restore(flags);
+}
+
+/*
+ * Invoked from macros defined in mmu_context.h
+ * which must already have disabled interrupts
+ * and done a DVPE or DMT as appropriate.
+ */
+
+void smtc_flush_tlb_asid(unsigned long asid)
+{
+	int entry;
+	unsigned long ehi;
+
+	entry = read_c0_wired();
+
+	/* Traverse all non-wired entries */
+	while (entry < current_cpu_data.tlbsize) {
+		write_c0_index(entry);
+		ehb();
+		tlb_read();
+		ehb();
+		ehi = read_c0_entryhi();
+		if((ehi & ASID_MASK) == asid) {
+		    /*
+		     * Invalidate only entries with specified ASID,
+		     * makiing sure all entries differ.
+		     */
+		    write_c0_entryhi(CKSEG0 + (entry << (PAGE_SHIFT + 1)));
+		    write_c0_entrylo0(0);
+		    write_c0_entrylo1(0);
+		    mtc0_tlbw_hazard();
+		    tlb_write_indexed();
+		}
+		entry++;
+	}
+	write_c0_index(PARKED_INDEX);
+	tlbw_use_hazard();
+}
+
+/*
+ * Support for single-threading cache flush operations.
+ */
+
+int halt_state_save[NR_CPUS];
+
+/*
+ * To really, really be sure that nothing is being done
+ * by other TCs, halt them all.  This code assumes that
+ * a DVPE has already been done, so while their Halted
+ * state is theoretically architecturally unstable, in
+ * practice, it's not going to change while we're looking
+ * at it.
+ */
+
+void smtc_cflush_lockdown(void)
+{
+	int cpu;
+
+	for_each_online_cpu(cpu) {
+		if (cpu != smp_processor_id()) {
+			settc(cpu_data[cpu].tc_id);
+			halt_state_save[cpu] = read_tc_c0_tchalt();
+			write_tc_c0_tchalt(TCHALT_H);
+		}
+	}
+	mips_ihb();
+}
+
+/* It would be cheating to change the cpu_online states during a flush! */
+
+void smtc_cflush_release(void)
+{
+	int cpu;
+
+	/*
+	 * Start with a hazard barrier to ensure
+	 * that all CACHE ops have played through.
+	 */
+	mips_ihb();
+
+	for_each_online_cpu(cpu) {
+		if (cpu != smp_processor_id()) {
+			settc(cpu_data[cpu].tc_id);
+			write_tc_c0_tchalt(halt_state_save[cpu]);
+		}
+	}
+	mips_ihb();
+}
diff --git a/arch/mips/kernel/syscall.c b/arch/mips/kernel/syscall.c
index 2aeaa2fd4b32..5e8a18a8e2bd 100644
--- a/arch/mips/kernel/syscall.c
+++ b/arch/mips/kernel/syscall.c
@@ -276,31 +276,9 @@ void sys_set_thread_area(unsigned long addr)
 
 asmlinkage int _sys_sysmips(int cmd, long arg1, int arg2, int arg3)
 {
-	int	tmp, len;
-	char	__user *name;
+	int	tmp;
 
 	switch(cmd) {
-	case SETNAME: {
-		char nodename[__NEW_UTS_LEN + 1];
-
-		if (!capable(CAP_SYS_ADMIN))
-			return -EPERM;
-
-		name = (char __user *) arg1;
-
-		len = strncpy_from_user(nodename, name, __NEW_UTS_LEN);
-		if (len < 0)
-			return -EFAULT;
-
-		down_write(&uts_sem);
-		strncpy(system_utsname.nodename, nodename, len);
-		nodename[__NEW_UTS_LEN] = '\0';
-		strlcpy(system_utsname.nodename, nodename,
-		        sizeof(system_utsname.nodename));
-		up_write(&uts_sem);
-		return 0;
-	}
-
 	case MIPS_ATOMIC_SET:
 		printk(KERN_CRIT "How did I get here?\n");
 		return -EINVAL;
@@ -313,9 +291,6 @@ asmlinkage int _sys_sysmips(int cmd, long arg1, int arg2, int arg3)
 	case FLUSH_CACHE:
 		__flush_cache_all();
 		return 0;
-
-	case MIPS_RDNVRAM:
-		return -EIO;
 	}
 
 	return -EINVAL;
diff --git a/arch/mips/kernel/time.c b/arch/mips/kernel/time.c
index 5e51a2d8f3f0..13ff4da598cd 100644
--- a/arch/mips/kernel/time.c
+++ b/arch/mips/kernel/time.c
@@ -116,8 +116,7 @@ static void c0_timer_ack(void)
 	write_c0_compare(expirelo);
 
 	/* Check to see if we have missed any timer interrupts.  */
-	count = read_c0_count();
-	if ((count - expirelo) < 0x7fffffff) {
+	while (((count = read_c0_count()) - expirelo) < 0x7fffffff) {
 		/* missed_timer_count++; */
 		expirelo = count + cycles_per_jiffy;
 		write_c0_compare(expirelo);
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index bed0eb6cf55d..a7564b08eb4d 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -42,6 +42,7 @@
 #include <asm/watch.h>
 #include <asm/types.h>
 
+extern asmlinkage void handle_int(void);
 extern asmlinkage void handle_tlbm(void);
 extern asmlinkage void handle_tlbl(void);
 extern asmlinkage void handle_tlbs(void);
@@ -279,9 +280,16 @@ static DEFINE_SPINLOCK(die_lock);
 NORET_TYPE void ATTRIB_NORET die(const char * str, struct pt_regs * regs)
 {
 	static int die_counter;
+#ifdef CONFIG_MIPS_MT_SMTC
+	unsigned long dvpret = dvpe();
+#endif /* CONFIG_MIPS_MT_SMTC */
 
 	console_verbose();
 	spin_lock_irq(&die_lock);
+	bust_spinlocks(1);
+#ifdef CONFIG_MIPS_MT_SMTC
+	mips_mt_regdump(dvpret);
+#endif /* CONFIG_MIPS_MT_SMTC */
 	printk("%s[#%d]:\n", str, ++die_counter);
 	show_registers(regs);
 	spin_unlock_irq(&die_lock);
@@ -750,12 +758,43 @@ asmlinkage void do_cpu(struct pt_regs *regs)
 						&current->thread.fpu.soft);
 			if (sig)
 				force_sig(sig, current);
+#ifdef CONFIG_MIPS_MT_FPAFF
+			else {
+			/*
+			 * MIPS MT processors may have fewer FPU contexts
+			 * than CPU threads. If we've emulated more than
+			 * some threshold number of instructions, force
+			 * migration to a "CPU" that has FP support.
+			 */
+			 if(mt_fpemul_threshold > 0
+			 && ((current->thread.emulated_fp++
+			    > mt_fpemul_threshold))) {
+			  /*
+			   * If there's no FPU present, or if the
+			   * application has already restricted
+			   * the allowed set to exclude any CPUs
+			   * with FPUs, we'll skip the procedure.
+			   */
+			  if (cpus_intersects(current->cpus_allowed,
+			  			mt_fpu_cpumask)) {
+			    cpumask_t tmask;
+
+			    cpus_and(tmask,
+					current->thread.user_cpus_allowed,
+					mt_fpu_cpumask);
+			    set_cpus_allowed(current, tmask);
+			    current->thread.mflags |= MF_FPUBOUND;
+			  }
+			 }
+			}
+#endif /* CONFIG_MIPS_MT_FPAFF */
 		}
 
 		return;
 
 	case 2:
 	case 3:
+		die_if_kernel("do_cpu invoked from kernel context!", regs);
 		break;
 	}
 
@@ -780,19 +819,64 @@ asmlinkage void do_watch(struct pt_regs *regs)
 
 asmlinkage void do_mcheck(struct pt_regs *regs)
 {
+	const int field = 2 * sizeof(unsigned long);
+	int multi_match = regs->cp0_status & ST0_TS;
+
 	show_regs(regs);
-	dump_tlb_all();
+
+	if (multi_match) {
+		printk("Index   : %0x\n", read_c0_index());
+		printk("Pagemask: %0x\n", read_c0_pagemask());
+		printk("EntryHi : %0*lx\n", field, read_c0_entryhi());
+		printk("EntryLo0: %0*lx\n", field, read_c0_entrylo0());
+		printk("EntryLo1: %0*lx\n", field, read_c0_entrylo1());
+		printk("\n");
+		dump_tlb_all();
+	}
+
+	show_code((unsigned int *) regs->cp0_epc);
+
 	/*
 	 * Some chips may have other causes of machine check (e.g. SB1
 	 * graduation timer)
 	 */
 	panic("Caught Machine Check exception - %scaused by multiple "
 	      "matching entries in the TLB.",
-	      (regs->cp0_status & ST0_TS) ? "" : "not ");
+	      (multi_match) ? "" : "not ");
 }
 
 asmlinkage void do_mt(struct pt_regs *regs)
 {
+	int subcode;
+
+	die_if_kernel("MIPS MT Thread exception in kernel", regs);
+
+	subcode = (read_vpe_c0_vpecontrol() & VPECONTROL_EXCPT)
+			>> VPECONTROL_EXCPT_SHIFT;
+	switch (subcode) {
+	case 0:
+		printk(KERN_ERR "Thread Underflow\n");
+		break;
+	case 1:
+		printk(KERN_ERR "Thread Overflow\n");
+		break;
+	case 2:
+		printk(KERN_ERR "Invalid YIELD Qualifier\n");
+		break;
+	case 3:
+		printk(KERN_ERR "Gating Storage Exception\n");
+		break;
+	case 4:
+		printk(KERN_ERR "YIELD Scheduler Exception\n");
+		break;
+	case 5:
+		printk(KERN_ERR "Gating Storage Schedulier Exception\n");
+		break;
+	default:
+		printk(KERN_ERR "*** UNKNOWN THREAD EXCEPTION %d ***\n",
+			subcode);
+		break;
+	}
 	die_if_kernel("MIPS MT Thread exception in kernel", regs);
 
 	force_sig(SIGILL, current);
@@ -833,6 +917,7 @@ static inline void parity_protection_init(void)
 {
 	switch (current_cpu_data.cputype) {
 	case CPU_24K:
+	case CPU_34K:
 	case CPU_5KC:
 		write_c0_ecc(0x80000000);
 		back_to_back_c0_hazard();
@@ -928,7 +1013,15 @@ void ejtag_exception_handler(struct pt_regs *regs)
  */
 void nmi_exception_handler(struct pt_regs *regs)
 {
+#ifdef CONFIG_MIPS_MT_SMTC
+	unsigned long dvpret = dvpe();
+	bust_spinlocks(1);
 	printk("NMI taken!!!!\n");
+	mips_mt_regdump(dvpret);
+#else
+	bust_spinlocks(1);
+	printk("NMI taken!!!!\n");
+#endif /* CONFIG_MIPS_MT_SMTC */
 	die("NMI", regs);
 	while(1) ;
 }
@@ -960,27 +1053,29 @@ void *set_except_vector(int n, void *addr)
 
 #ifdef CONFIG_CPU_MIPSR2
 /*
- * Shadow register allocation
+ * MIPSR2 shadow register set allocation
  * FIXME: SMP...
  */
 
-/* MIPSR2 shadow register sets */
-struct shadow_registers {
-	spinlock_t sr_lock;	/*  */
-	int sr_supported;	/* Number of shadow register sets supported */
-	int sr_allocated;	/* Bitmap of allocated shadow registers */
+static struct shadow_registers {
+	/*
+	 * Number of shadow register sets supported
+	 */
+	unsigned long sr_supported;
+	/*
+	 * Bitmap of allocated shadow registers
+	 */
+	unsigned long sr_allocated;
 } shadow_registers;
 
-void mips_srs_init(void)
+static void mips_srs_init(void)
 {
 #ifdef CONFIG_CPU_MIPSR2_SRS
 	shadow_registers.sr_supported = ((read_c0_srsctl() >> 26) & 0x0f) + 1;
-	printk ("%d MIPSR2 register sets available\n", shadow_registers.sr_supported);
-#else
-	shadow_registers.sr_supported = 1;
+	printk(KERN_INFO "%d MIPSR2 register sets available\n",
+	       shadow_registers.sr_supported);
 #endif
 	shadow_registers.sr_allocated = 1;	/* Set 0 used by kernel */
-	spin_lock_init(&shadow_registers.sr_lock);
 }
 
 int mips_srs_max(void)
@@ -988,38 +1083,30 @@ int mips_srs_max(void)
 	return shadow_registers.sr_supported;
 }
 
-int mips_srs_alloc (void)
+int mips_srs_alloc(void)
 {
 	struct shadow_registers *sr = &shadow_registers;
-	unsigned long flags;
 	int set;
 
-	spin_lock_irqsave(&sr->sr_lock, flags);
+again:
+	set = find_first_zero_bit(&sr->sr_allocated, sr->sr_supported);
+	if (set >= sr->sr_supported)
+		return -1;
 
-	for (set = 0; set < sr->sr_supported; set++) {
-		if ((sr->sr_allocated & (1 << set)) == 0) {
-			sr->sr_allocated |= 1 << set;
-			spin_unlock_irqrestore(&sr->sr_lock, flags);
-			return set;
-		}
-	}
+	if (test_and_set_bit(set, &sr->sr_allocated))
+		goto again;
 
-	/* None available */
-	spin_unlock_irqrestore(&sr->sr_lock, flags);
-	return -1;
+	return set;
 }
 
-void mips_srs_free (int set)
+void mips_srs_free(int set)
 {
 	struct shadow_registers *sr = &shadow_registers;
-	unsigned long flags;
 
-	spin_lock_irqsave(&sr->sr_lock, flags);
-	sr->sr_allocated &= ~(1 << set);
-	spin_unlock_irqrestore(&sr->sr_lock, flags);
+	clear_bit(set, &sr->sr_allocated);
 }
 
-void *set_vi_srs_handler (int n, void *addr, int srs)
+static void *set_vi_srs_handler(int n, void *addr, int srs)
 {
 	unsigned long handler;
 	unsigned long old_handler = vi_handlers[n];
@@ -1032,8 +1119,7 @@ void *set_vi_srs_handler (int n, void *addr, int srs)
 	if (addr == NULL) {
 		handler = (unsigned long) do_default_vi;
 		srs = 0;
-	}
-	else
+	} else
 		handler = (unsigned long) addr;
 	vi_handlers[n] = (unsigned long) addr;
 
@@ -1045,8 +1131,7 @@ void *set_vi_srs_handler (int n, void *addr, int srs)
 	if (cpu_has_veic) {
 		if (board_bind_eic_interrupt)
 			board_bind_eic_interrupt (n, srs);
-	}
-	else if (cpu_has_vint) {
+	} else if (cpu_has_vint) {
 		/* SRSMap is only defined if shadow sets are implemented */
 		if (mips_srs_max() > 1)
 			change_c0_srsmap (0xf << n*4, srs << n*4);
@@ -1060,6 +1145,15 @@ void *set_vi_srs_handler (int n, void *addr, int srs)
 
 		extern char except_vec_vi, except_vec_vi_lui;
 		extern char except_vec_vi_ori, except_vec_vi_end;
+#ifdef CONFIG_MIPS_MT_SMTC
+		/*
+		 * We need to provide the SMTC vectored interrupt handler
+		 * not only with the address of the handler, but with the
+		 * Status.IM bit to be masked before going there.
+		 */
+		extern char except_vec_vi_mori;
+		const int mori_offset = &except_vec_vi_mori - &except_vec_vi;
+#endif /* CONFIG_MIPS_MT_SMTC */
 		const int handler_len = &except_vec_vi_end - &except_vec_vi;
 		const int lui_offset = &except_vec_vi_lui - &except_vec_vi;
 		const int ori_offset = &except_vec_vi_ori - &except_vec_vi;
@@ -1073,6 +1167,12 @@ void *set_vi_srs_handler (int n, void *addr, int srs)
 		}
 
 		memcpy (b, &except_vec_vi, handler_len);
+#ifdef CONFIG_MIPS_MT_SMTC
+		if (n > 7)
+			printk("Vector index %d exceeds SMTC maximum\n", n);
+		w = (u32 *)(b + mori_offset);
+		*w = (*w & 0xffff0000) | (0x100 << n);
+#endif /* CONFIG_MIPS_MT_SMTC */
 		w = (u32 *)(b + lui_offset);
 		*w = (*w & 0xffff0000) | (((u32)handler >> 16) & 0xffff);
 		w = (u32 *)(b + ori_offset);
@@ -1095,9 +1195,9 @@ void *set_vi_srs_handler (int n, void *addr, int srs)
 	return (void *)old_handler;
 }
 
-void *set_vi_handler (int n, void *addr)
+void *set_vi_handler(int n, void *addr)
 {
-	return set_vi_srs_handler (n, addr, 0);
+	return set_vi_srs_handler(n, addr, 0);
 }
 #endif
 
@@ -1113,8 +1213,29 @@ extern asmlinkage int _restore_fp_context(struct sigcontext *sc);
 extern asmlinkage int fpu_emulator_save_context(struct sigcontext *sc);
 extern asmlinkage int fpu_emulator_restore_context(struct sigcontext *sc);
 
+#ifdef CONFIG_SMP
+static int smp_save_fp_context(struct sigcontext *sc)
+{
+	return cpu_has_fpu
+	       ? _save_fp_context(sc)
+	       : fpu_emulator_save_context(sc);
+}
+
+static int smp_restore_fp_context(struct sigcontext *sc)
+{
+	return cpu_has_fpu
+	       ? _restore_fp_context(sc)
+	       : fpu_emulator_restore_context(sc);
+}
+#endif
+
 static inline void signal_init(void)
 {
+#ifdef CONFIG_SMP
+	/* For now just do the cpu_has_fpu check when the functions are invoked */
+	save_fp_context = smp_save_fp_context;
+	restore_fp_context = smp_restore_fp_context;
+#else
 	if (cpu_has_fpu) {
 		save_fp_context = _save_fp_context;
 		restore_fp_context = _restore_fp_context;
@@ -1122,6 +1243,7 @@ static inline void signal_init(void)
 		save_fp_context = fpu_emulator_save_context;
 		restore_fp_context = fpu_emulator_restore_context;
 	}
+#endif
 }
 
 #ifdef CONFIG_MIPS32_COMPAT
@@ -1158,6 +1280,20 @@ void __init per_cpu_trap_init(void)
 {
 	unsigned int cpu = smp_processor_id();
 	unsigned int status_set = ST0_CU0;
+#ifdef CONFIG_MIPS_MT_SMTC
+	int secondaryTC = 0;
+	int bootTC = (cpu == 0);
+
+	/*
+	 * Only do per_cpu_trap_init() for first TC of Each VPE.
+	 * Note that this hack assumes that the SMTC init code
+	 * assigns TCs consecutively and in ascending order.
+	 */
+
+	if (((read_c0_tcbind() & TCBIND_CURTC) != 0) &&
+	    ((read_c0_tcbind() & TCBIND_CURVPE) == cpu_data[cpu - 1].vpe_id))
+		secondaryTC = 1;
+#endif /* CONFIG_MIPS_MT_SMTC */
 
 	/*
 	 * Disable coprocessors and select 32-bit or 64-bit addressing
@@ -1180,6 +1316,10 @@ void __init per_cpu_trap_init(void)
 	write_c0_hwrena (0x0000000f); /* Allow rdhwr to all registers */
 #endif
 
+#ifdef CONFIG_MIPS_MT_SMTC
+	if (!secondaryTC) {
+#endif /* CONFIG_MIPS_MT_SMTC */
+
 	/*
 	 * Interrupt handling.
 	 */
@@ -1196,6 +1336,9 @@ void __init per_cpu_trap_init(void)
 		} else
 			set_c0_cause(CAUSEF_IV);
 	}
+#ifdef CONFIG_MIPS_MT_SMTC
+	}
+#endif /* CONFIG_MIPS_MT_SMTC */
 
 	cpu_data[cpu].asid_cache = ASID_FIRST_VERSION;
 	TLBMISS_HANDLER_SETUP();
@@ -1205,8 +1348,14 @@ void __init per_cpu_trap_init(void)
 	BUG_ON(current->mm);
 	enter_lazy_tlb(&init_mm, current);
 
-	cpu_cache_init();
-	tlb_init();
+#ifdef CONFIG_MIPS_MT_SMTC
+	if (bootTC) {
+#endif /* CONFIG_MIPS_MT_SMTC */
+		cpu_cache_init();
+		tlb_init();
+#ifdef CONFIG_MIPS_MT_SMTC
+	}
+#endif /* CONFIG_MIPS_MT_SMTC */
 }
 
 /* Install CPU exception handler */
@@ -1278,7 +1427,7 @@ void __init trap_init(void)
 	if (cpu_has_veic || cpu_has_vint) {
 		int nvec = cpu_has_veic ? 64 : 8;
 		for (i = 0; i < nvec; i++)
-			set_vi_handler (i, NULL);
+			set_vi_handler(i, NULL);
 	}
 	else if (cpu_has_divec)
 		set_handler(0x200, &except_vec4, 0x8);
@@ -1297,6 +1446,7 @@ void __init trap_init(void)
 	if (board_be_init)
 		board_be_init();
 
+	set_except_vector(0, handle_int);
 	set_except_vector(1, handle_tlbm);
 	set_except_vector(2, handle_tlbl);
 	set_except_vector(3, handle_tlbs);
diff --git a/arch/mips/kernel/vmlinux.lds.S b/arch/mips/kernel/vmlinux.lds.S
index 2ad0cedf29fe..b84d1f9ce28e 100644
--- a/arch/mips/kernel/vmlinux.lds.S
+++ b/arch/mips/kernel/vmlinux.lds.S
@@ -2,7 +2,7 @@
 #include <asm/asm-offsets.h>
 #include <asm-generic/vmlinux.lds.h>
 
-#undef mips		/* CPP really sucks for this job  */
+#undef mips
 #define mips mips
 OUTPUT_ARCH(mips)
 ENTRY(kernel_entry)
@@ -151,23 +151,13 @@ SECTIONS
 
   /* This is the MIPS specific mdebug section.  */
   .mdebug : { *(.mdebug) }
-  /* These are needed for ELF backends which have not yet been
-     converted to the new style linker.  */
-  .stab 0 : { *(.stab) }
-  .stabstr 0 : { *(.stabstr) }
-  /* DWARF debug sections.
-     Symbols in the .debug DWARF section are relative to the beginning of the
-     section so we begin .debug at 0.  It's not clear yet what needs to happen
-     for the others.   */
-  .debug          0 : { *(.debug) }
-  .debug_srcinfo  0 : { *(.debug_srcinfo) }
-  .debug_aranges  0 : { *(.debug_aranges) }
-  .debug_pubnames 0 : { *(.debug_pubnames) }
-  .debug_sfnames  0 : { *(.debug_sfnames) }
-  .line           0 : { *(.line) }
+
+  STABS_DEBUG
+
+  DWARF_DEBUG
+
   /* These must appear regardless of  .  */
   .gptab.sdata : { *(.gptab.data) *(.gptab.sdata) }
   .gptab.sbss : { *(.gptab.bss) *(.gptab.sbss) }
-  .comment : { *(.comment) }
   .note : { *(.note) }
 }
diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c
index ae83b755cf4a..85d7df7b18e1 100644
--- a/arch/mips/kernel/vpe.c
+++ b/arch/mips/kernel/vpe.c
@@ -13,7 +13,6 @@
  *  You should have received a copy of the GNU General Public License along
  *  with this program; if not, write to the Free Software Foundation, Inc.,
  *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
  */
 
 /*
@@ -27,11 +26,8 @@
  *
  * To load and run, simply cat a SP 'program file' to /dev/vpe1.
  * i.e cat spapp >/dev/vpe1.
- *
- * You'll need to have the following device files.
- * mknod /dev/vpe0 c 63 0
- * mknod /dev/vpe1 c 63 1
  */
+
 #include <linux/config.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
@@ -55,6 +51,8 @@
 #include <asm/cpu.h>
 #include <asm/processor.h>
 #include <asm/system.h>
+#include <asm/vpe.h>
+#include <asm/kspd.h>
 
 typedef void *vpe_handle;
 
@@ -68,6 +66,11 @@ typedef void *vpe_handle;
 static char module_name[] = "vpe";
 static int major;
 
+#ifdef CONFIG_MIPS_APSP_KSPD
+ static struct kspd_notifications kspd_events;
+static int kspd_events_reqd = 0;
+#endif
+
 /* grab the likely amount of memory we will need. */
 #ifdef CONFIG_MIPS_VPE_LOADER_TOM
 #define P_SIZE (2 * 1024 * 1024)
@@ -76,7 +79,10 @@ static int major;
 #define P_SIZE (256 * 1024)
 #endif
 
+extern unsigned long physical_memsize;
+
 #define MAX_VPES 16
+#define VPE_PATH_MAX 256
 
 enum vpe_state {
 	VPE_STATE_UNUSED = 0,
@@ -102,6 +108,8 @@ struct vpe {
 	unsigned long len;
 	char *pbuffer;
 	unsigned long plen;
+	unsigned int uid, gid;
+	char cwd[VPE_PATH_MAX];
 
 	unsigned long __start;
 
@@ -113,6 +121,9 @@ struct vpe {
 
 	/* shared symbol address */
 	void *shared_ptr;
+
+	/* the list of who wants to know when something major happens */
+	struct list_head notify;
 };
 
 struct tc {
@@ -138,7 +149,7 @@ struct vpecontrol_ {
 } vpecontrol;
 
 static void release_progmem(void *ptr);
-static void dump_vpe(struct vpe * v);
+/* static __attribute_used__ void dump_vpe(struct vpe * v); */
 extern void save_gp_address(unsigned int secbase, unsigned int rel);
 
 /* get the vpe associated with this minor */
@@ -146,12 +157,14 @@ struct vpe *get_vpe(int minor)
 {
 	struct vpe *v;
 
+	if (!cpu_has_mipsmt)
+		return NULL;
+
 	list_for_each_entry(v, &vpecontrol.vpe_list, list) {
 		if (v->minor == minor)
 			return v;
 	}
 
-	printk(KERN_DEBUG "VPE: get_vpe minor %d not found\n", minor);
 	return NULL;
 }
 
@@ -165,8 +178,6 @@ struct tc *get_tc(int index)
 			return t;
 	}
 
-	printk(KERN_DEBUG "VPE: get_tc index %d not found\n", index);
-
 	return NULL;
 }
 
@@ -179,8 +190,6 @@ struct tc *get_tc_unused(void)
 			return t;
 	}
 
-	printk(KERN_DEBUG "VPE: All TC's are in use\n");
-
 	return NULL;
 }
 
@@ -190,13 +199,13 @@ struct vpe *alloc_vpe(int minor)
 	struct vpe *v;
 
 	if ((v = kzalloc(sizeof(struct vpe), GFP_KERNEL)) == NULL) {
-		printk(KERN_WARNING "VPE: alloc_vpe no mem\n");
 		return NULL;
 	}
 
 	INIT_LIST_HEAD(&v->tc);
 	list_add_tail(&v->list, &vpecontrol.vpe_list);
 
+	INIT_LIST_HEAD(&v->notify);
 	v->minor = minor;
 	return v;
 }
@@ -207,7 +216,6 @@ struct tc *alloc_tc(int index)
 	struct tc *t;
 
 	if ((t = kzalloc(sizeof(struct tc), GFP_KERNEL)) == NULL) {
-		printk(KERN_WARNING "VPE: alloc_tc no mem\n");
 		return NULL;
 	}
 
@@ -236,20 +244,16 @@ void dump_mtregs(void)
 	printk("config3 0x%lx MT %ld\n", val,
 	       (val & CONFIG3_MT) >> CONFIG3_MT_SHIFT);
 
-	val = read_c0_mvpconf0();
-	printk("mvpconf0 0x%lx, PVPE %ld PTC %ld M %ld\n", val,
-	       (val & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT,
-	       val & MVPCONF0_PTC, (val & MVPCONF0_M) >> MVPCONF0_M_SHIFT);
-
 	val = read_c0_mvpcontrol();
 	printk("MVPControl 0x%lx, STLB %ld VPC %ld EVP %ld\n", val,
 	       (val & MVPCONTROL_STLB) >> MVPCONTROL_STLB_SHIFT,
 	       (val & MVPCONTROL_VPC) >> MVPCONTROL_VPC_SHIFT,
 	       (val & MVPCONTROL_EVP));
 
-	val = read_c0_vpeconf0();
-	printk("VPEConf0 0x%lx MVP %ld\n", val,
-	       (val & VPECONF0_MVP) >> VPECONF0_MVP_SHIFT);
+	val = read_c0_mvpconf0();
+	printk("mvpconf0 0x%lx, PVPE %ld PTC %ld M %ld\n", val,
+	       (val & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT,
+	       val & MVPCONF0_PTC, (val & MVPCONF0_M) >> MVPCONF0_M_SHIFT);
 }
 
 /* Find some VPE program space  */
@@ -354,9 +358,9 @@ static int apply_r_mips_gprel16(struct module *me, uint32_t *location,
 	}
 
 	if( (rel > 32768) || (rel < -32768) ) {
-		printk(KERN_ERR
-		       "apply_r_mips_gprel16: relative address out of range 0x%x %d\n",
-		       rel, rel);
+		printk(KERN_DEBUG "VPE loader: apply_r_mips_gprel16: "
+		       "relative address 0x%x out of range of gp register\n",
+		       rel);
 		return -ENOEXEC;
 	}
 
@@ -374,8 +378,8 @@ static int apply_r_mips_pc16(struct module *me, uint32_t *location,
 	rel -= 1;		// and one instruction less due to the branch delay slot.
 
 	if( (rel > 32768) || (rel < -32768) ) {
-		printk(KERN_ERR
-		       "apply_r_mips_pc16: relative address out of range 0x%x\n", rel);
+		printk(KERN_DEBUG "VPE loader: "
+ 		       "apply_r_mips_pc16: relative address out of range 0x%x\n", rel);
 		return -ENOEXEC;
 	}
 
@@ -396,7 +400,8 @@ static int apply_r_mips_26(struct module *me, uint32_t *location,
 			   Elf32_Addr v)
 {
 	if (v % 4) {
-		printk(KERN_ERR "module %s: dangerous relocation mod4\n", me->name);
+		printk(KERN_DEBUG "VPE loader: apply_r_mips_26 "
+		       " unaligned relocation\n");
 		return -ENOEXEC;
 	}
 
@@ -459,12 +464,13 @@ static int apply_r_mips_lo16(struct module *me, uint32_t *location,
 			/*
 			 * The value for the HI16 had best be the same.
 			 */
-			if (v != l->value) {
-				printk("%d != %d\n", v, l->value);
-				goto out_danger;
+ 			if (v != l->value) {
+				printk(KERN_DEBUG "VPE loader: "
+				       "apply_r_mips_lo16/hi16: 	"
+				       "inconsistent value information\n");
+				return -ENOEXEC;
 			}
 
-
 			/*
 			 * Do the HI16 relocation.  Note that we actually don't
 			 * need to know anything about the LO16 itself, except
@@ -500,11 +506,6 @@ static int apply_r_mips_lo16(struct module *me, uint32_t *location,
 	*location = insnlo;
 
 	return 0;
-
-out_danger:
-	printk(KERN_ERR "module %s: dangerous " "relocation\n", me->name);
-
-	return -ENOEXEC;
 }
 
 static int (*reloc_handlers[]) (struct module *me, uint32_t *location,
@@ -518,6 +519,15 @@ static int (*reloc_handlers[]) (struct module *me, uint32_t *location,
 	[R_MIPS_PC16] = apply_r_mips_pc16
 };
 
+static char *rstrs[] = {
+    	[R_MIPS_NONE]	= "MIPS_NONE",
+	[R_MIPS_32]	= "MIPS_32",
+	[R_MIPS_26]	= "MIPS_26",
+	[R_MIPS_HI16]	= "MIPS_HI16",
+	[R_MIPS_LO16]	= "MIPS_LO16",
+	[R_MIPS_GPREL16] = "MIPS_GPREL16",
+	[R_MIPS_PC16] = "MIPS_PC16"
+};
 
 int apply_relocations(Elf32_Shdr *sechdrs,
 		      const char *strtab,
@@ -552,15 +562,13 @@ int apply_relocations(Elf32_Shdr *sechdrs,
 
 		res = reloc_handlers[ELF32_R_TYPE(r_info)](me, location, v);
 		if( res ) {
-			printk(KERN_DEBUG
-			       "relocation error 0x%x sym refer <%s> value 0x%x "
-			       "type 0x%x r_info 0x%x\n",
-			       (unsigned int)location, strtab + sym->st_name, v,
-			       r_info, ELF32_R_TYPE(r_info));
-		}
-
-		if (res)
+			char *r = rstrs[ELF32_R_TYPE(r_info)];
+		    	printk(KERN_WARNING "VPE loader: .text+0x%x "
+			       "relocation type %s for symbol \"%s\" failed\n",
+			       rel[i].r_offset, r ? r : "UNKNOWN",
+			       strtab + sym->st_name);
 			return res;
+		}
 	}
 
 	return 0;
@@ -576,7 +584,7 @@ void save_gp_address(unsigned int secbase, unsigned int rel)
 
 
 /* Change all symbols so that sh_value encodes the pointer directly. */
-static int simplify_symbols(Elf_Shdr * sechdrs,
+static void simplify_symbols(Elf_Shdr * sechdrs,
 			    unsigned int symindex,
 			    const char *strtab,
 			    const char *secstrings,
@@ -585,18 +593,21 @@ static int simplify_symbols(Elf_Shdr * sechdrs,
 	Elf_Sym *sym = (void *)sechdrs[symindex].sh_addr;
 	unsigned long secbase, bssbase = 0;
 	unsigned int i, n = sechdrs[symindex].sh_size / sizeof(Elf_Sym);
-	int ret = 0, size;
+	int size;
 
 	/* find the .bss section for COMMON symbols */
 	for (i = 0; i < nsecs; i++) {
-		if (strncmp(secstrings + sechdrs[i].sh_name, ".bss", 4) == 0)
+		if (strncmp(secstrings + sechdrs[i].sh_name, ".bss", 4) == 0) {
 			bssbase = sechdrs[i].sh_addr;
+			break;
+		}
 	}
 
 	for (i = 1; i < n; i++) {
 		switch (sym[i].st_shndx) {
 		case SHN_COMMON:
-			/* Allocate space for the symbol in the .bss section. st_value is currently size.
+			/* Allocate space for the symbol in the .bss section.
+			   st_value is currently size.
 			   We want it to have the address of the symbol. */
 
 			size = sym[i].st_value;
@@ -614,11 +625,9 @@ static int simplify_symbols(Elf_Shdr * sechdrs,
 			break;
 
 		case SHN_MIPS_SCOMMON:
-
-			printk(KERN_DEBUG
-			       "simplify_symbols: ignoring SHN_MIPS_SCOMMON symbol <%s> st_shndx %d\n",
-			       strtab + sym[i].st_name, sym[i].st_shndx);
-
+			printk(KERN_DEBUG "simplify_symbols: ignoring SHN_MIPS_SCOMMON"
+			       "symbol <%s> st_shndx %d\n", strtab + sym[i].st_name,
+			       sym[i].st_shndx);
 			// .sbss section
 			break;
 
@@ -632,10 +641,7 @@ static int simplify_symbols(Elf_Shdr * sechdrs,
 			sym[i].st_value += secbase;
 			break;
 		}
-
 	}
-
-	return ret;
 }
 
 #ifdef DEBUG_ELFLOADER
@@ -655,9 +661,26 @@ static void dump_elfsymbols(Elf_Shdr * sechdrs, unsigned int symindex,
 
 static void dump_tc(struct tc *t)
 {
-	printk(KERN_WARNING "VPE: TC index %d TCStatus 0x%lx halt 0x%lx\n",
-	       t->index, read_tc_c0_tcstatus(), read_tc_c0_tchalt());
-	printk(KERN_WARNING "VPE: tcrestart 0x%lx\n", read_tc_c0_tcrestart());
+  	unsigned long val;
+
+  	settc(t->index);
+ 	printk(KERN_DEBUG "VPE loader: TC index %d targtc %ld "
+ 	       "TCStatus 0x%lx halt 0x%lx\n",
+  	       t->index, read_c0_vpecontrol() & VPECONTROL_TARGTC,
+  	       read_tc_c0_tcstatus(), read_tc_c0_tchalt());
+
+ 	printk(KERN_DEBUG " tcrestart 0x%lx\n", read_tc_c0_tcrestart());
+ 	printk(KERN_DEBUG " tcbind 0x%lx\n", read_tc_c0_tcbind());
+
+  	val = read_c0_vpeconf0();
+ 	printk(KERN_DEBUG " VPEConf0 0x%lx MVP %ld\n", val,
+  	       (val & VPECONF0_MVP) >> VPECONF0_MVP_SHIFT);
+
+ 	printk(KERN_DEBUG " c0 status 0x%lx\n", read_vpe_c0_status());
+ 	printk(KERN_DEBUG " c0 cause 0x%lx\n", read_vpe_c0_cause());
+
+ 	printk(KERN_DEBUG " c0 badvaddr 0x%lx\n", read_vpe_c0_badvaddr());
+ 	printk(KERN_DEBUG " c0 epc 0x%lx\n", read_vpe_c0_epc());
 }
 
 static void dump_tclist(void)
@@ -672,96 +695,108 @@ static void dump_tclist(void)
 /* We are prepared so configure and start the VPE... */
 int vpe_run(struct vpe * v)
 {
-	unsigned long val;
+	struct vpe_notifications *n;
+	unsigned long val, dmt_flag;
 	struct tc *t;
 
 	/* check we are the Master VPE */
 	val = read_c0_vpeconf0();
 	if (!(val & VPECONF0_MVP)) {
 		printk(KERN_WARNING
-		       "VPE: only Master VPE's are allowed to configure MT\n");
+		       "VPE loader: only Master VPE's are allowed to configure MT\n");
 		return -1;
 	}
 
 	/* disable MT (using dvpe) */
 	dvpe();
 
+	if (!list_empty(&v->tc)) {
+                if ((t = list_entry(v->tc.next, struct tc, tc)) == NULL) {
+                        printk(KERN_WARNING "VPE loader: TC %d is already in use.\n",
+                               t->index);
+                        return -ENOEXEC;
+                }
+        } else {
+                printk(KERN_WARNING "VPE loader: No TC's associated with VPE %d\n",
+                       v->minor);
+                return -ENOEXEC;
+        }
+
 	/* Put MVPE's into 'configuration state' */
 	set_c0_mvpcontrol(MVPCONTROL_VPC);
 
-	if (!list_empty(&v->tc)) {
-		if ((t = list_entry(v->tc.next, struct tc, tc)) == NULL) {
-			printk(KERN_WARNING "VPE: TC %d is already in use.\n",
-			       t->index);
-			return -ENOEXEC;
-		}
-	} else {
-		printk(KERN_WARNING "VPE: No TC's associated with VPE %d\n",
-		       v->minor);
-		return -ENOEXEC;
-	}
-
 	settc(t->index);
 
-	val = read_vpe_c0_vpeconf0();
-
 	/* should check it is halted, and not activated */
 	if ((read_tc_c0_tcstatus() & TCSTATUS_A) || !(read_tc_c0_tchalt() & TCHALT_H)) {
-		printk(KERN_WARNING "VPE: TC %d is already doing something!\n",
+		printk(KERN_WARNING "VPE loader: TC %d is already doing something!\n",
 		       t->index);
-
 		dump_tclist();
 		return -ENOEXEC;
 	}
 
+	/*
+	 * Disable multi-threaded execution whilst we activate, clear the
+	 * halt bit and bound the tc to the other VPE...
+	 */
+	dmt_flag = dmt();
+
 	/* Write the address we want it to start running from in the TCPC register. */
 	write_tc_c0_tcrestart((unsigned long)v->__start);
-
-	/* write the sivc_info address to tccontext */
 	write_tc_c0_tccontext((unsigned long)0);
-
-	/* Set up the XTC bit in vpeconf0 to point at our tc */
-	write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() | (t->index << VPECONF0_XTC_SHIFT));
-
-	/* mark the TC as activated, not interrupt exempt and not dynamically allocatable */
+	/*
+	 * Mark the TC as activated, not interrupt exempt and not dynamically
+	 * allocatable
+	 */
 	val = read_tc_c0_tcstatus();
 	val = (val & ~(TCSTATUS_DA | TCSTATUS_IXMT)) | TCSTATUS_A;
 	write_tc_c0_tcstatus(val);
 
 	write_tc_c0_tchalt(read_tc_c0_tchalt() & ~TCHALT_H);
 
-	/* set up VPE1 */
-	write_vpe_c0_vpecontrol(read_vpe_c0_vpecontrol() & ~VPECONTROL_TE);	// no multiple TC's
-	write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() | VPECONF0_VPA);	// enable this VPE
-
 	/*
 	 * The sde-kit passes 'memsize' to __start in $a3, so set something
-	 * here...
-	 * Or set $a3 (register 7) to zero and define DFLT_STACK_SIZE and
+	 * here...  Or set $a3 to zero and define DFLT_STACK_SIZE and
 	 * DFLT_HEAP_SIZE when you compile your program
 	 */
+ 	mttgpr(7, physical_memsize);
+
+
+	/* set up VPE1 */
+	/*
+	 * bind the TC to VPE 1 as late as possible so we only have the final
+	 * VPE registers to set up, and so an EJTAG probe can trigger on it
+	 */
+ 	write_tc_c0_tcbind((read_tc_c0_tcbind() & ~TCBIND_CURVPE) | v->minor);
 
-	mttgpr(7, 0);
+        /* Set up the XTC bit in vpeconf0 to point at our tc */
+        write_vpe_c0_vpeconf0( (read_vpe_c0_vpeconf0() & ~(VPECONF0_XTC))
+                               | (t->index << VPECONF0_XTC_SHIFT));
 
-	/* set config to be the same as vpe0, particularly kseg0 coherency alg */
-	write_vpe_c0_config(read_c0_config());
+        /* enable this VPE */
+        write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() | VPECONF0_VPA);
 
 	/* clear out any left overs from a previous program */
+	write_vpe_c0_status(0);
 	write_vpe_c0_cause(0);
 
 	/* take system out of configuration state */
 	clear_c0_mvpcontrol(MVPCONTROL_VPC);
 
-	/* clear interrupts enabled IE, ERL, EXL, and KSU from c0 status */
-	write_vpe_c0_status(read_vpe_c0_status() & ~(ST0_ERL | ST0_KSU | ST0_IE | ST0_EXL));
+	/* now safe to re-enable multi-threading */
+	emt(dmt_flag);
 
 	/* set it running */
 	evpe(EVPE_ENABLE);
 
+	list_for_each_entry(n, &v->notify, list) {
+		n->start(v->minor);
+	}
+
 	return 0;
 }
 
-static unsigned long find_vpe_symbols(struct vpe * v, Elf_Shdr * sechdrs,
+static int find_vpe_symbols(struct vpe * v, Elf_Shdr * sechdrs,
 				      unsigned int symindex, const char *strtab,
 				      struct module *mod)
 {
@@ -778,26 +813,28 @@ static unsigned long find_vpe_symbols(struct vpe * v, Elf_Shdr * sechdrs,
 		}
 	}
 
+	if ( (v->__start == 0) || (v->shared_ptr == NULL))
+		return -1;
+
 	return 0;
 }
 
 /*
- * Allocates a VPE with some program code space(the load address), copies
- * the contents of the program (p)buffer performing relocatations/etc,
- * free's it when finished.
-*/
+ * Allocates a VPE with some program code space(the load address), copies the
+ * contents of the program (p)buffer performing relocatations/etc, free's it
+ * when finished.
+ */
 int vpe_elfload(struct vpe * v)
 {
 	Elf_Ehdr *hdr;
 	Elf_Shdr *sechdrs;
 	long err = 0;
 	char *secstrings, *strtab = NULL;
-	unsigned int len, i, symindex = 0, strindex = 0;
-
+	unsigned int len, i, symindex = 0, strindex = 0, relocate = 0;
 	struct module mod;	// so we can re-use the relocations code
 
 	memset(&mod, 0, sizeof(struct module));
-	strcpy(mod.name, "VPE dummy prog module");
+	strcpy(mod.name, "VPE loader");
 
 	hdr = (Elf_Ehdr *) v->pbuffer;
 	len = v->plen;
@@ -805,16 +842,22 @@ int vpe_elfload(struct vpe * v)
 	/* Sanity checks against insmoding binaries or wrong arch,
 	   weird elf version */
 	if (memcmp(hdr->e_ident, ELFMAG, 4) != 0
-	    || hdr->e_type != ET_REL || !elf_check_arch(hdr)
+	    || (hdr->e_type != ET_REL && hdr->e_type != ET_EXEC)
+	    || !elf_check_arch(hdr)
 	    || hdr->e_shentsize != sizeof(*sechdrs)) {
 		printk(KERN_WARNING
-		       "VPE program, wrong arch or weird elf version\n");
+		       "VPE loader: program wrong arch or weird elf version\n");
 
 		return -ENOEXEC;
 	}
 
+	if (hdr->e_type == ET_REL)
+		relocate = 1;
+
 	if (len < hdr->e_shoff + hdr->e_shnum * sizeof(Elf_Shdr)) {
-		printk(KERN_ERR "VPE program length %u truncated\n", len);
+		printk(KERN_ERR "VPE loader: program length %u truncated\n",
+		       len);
+
 		return -ENOEXEC;
 	}
 
@@ -826,82 +869,126 @@ int vpe_elfload(struct vpe * v)
 	/* And these should exist, but gcc whinges if we don't init them */
 	symindex = strindex = 0;
 
-	for (i = 1; i < hdr->e_shnum; i++) {
-
-		if (sechdrs[i].sh_type != SHT_NOBITS
-		    && len < sechdrs[i].sh_offset + sechdrs[i].sh_size) {
-			printk(KERN_ERR "VPE program length %u truncated\n",
-			       len);
-			return -ENOEXEC;
-		}
+	if (relocate) {
+		for (i = 1; i < hdr->e_shnum; i++) {
+			if (sechdrs[i].sh_type != SHT_NOBITS
+			    && len < sechdrs[i].sh_offset + sechdrs[i].sh_size) {
+				printk(KERN_ERR "VPE program length %u truncated\n",
+				       len);
+				return -ENOEXEC;
+			}
 
-		/* Mark all sections sh_addr with their address in the
-		   temporary image. */
-		sechdrs[i].sh_addr = (size_t) hdr + sechdrs[i].sh_offset;
+			/* Mark all sections sh_addr with their address in the
+			   temporary image. */
+			sechdrs[i].sh_addr = (size_t) hdr + sechdrs[i].sh_offset;
 
-		/* Internal symbols and strings. */
-		if (sechdrs[i].sh_type == SHT_SYMTAB) {
-			symindex = i;
-			strindex = sechdrs[i].sh_link;
-			strtab = (char *)hdr + sechdrs[strindex].sh_offset;
+			/* Internal symbols and strings. */
+			if (sechdrs[i].sh_type == SHT_SYMTAB) {
+				symindex = i;
+				strindex = sechdrs[i].sh_link;
+				strtab = (char *)hdr + sechdrs[strindex].sh_offset;
+			}
 		}
+		layout_sections(&mod, hdr, sechdrs, secstrings);
 	}
 
-	layout_sections(&mod, hdr, sechdrs, secstrings);
-
 	v->load_addr = alloc_progmem(mod.core_size);
 	memset(v->load_addr, 0, mod.core_size);
 
-	printk("VPE elf_loader: loading to %p\n", v->load_addr);
+	printk("VPE loader: loading to %p\n", v->load_addr);
 
-	for (i = 0; i < hdr->e_shnum; i++) {
-		void *dest;
+	if (relocate) {
+		for (i = 0; i < hdr->e_shnum; i++) {
+			void *dest;
 
-		if (!(sechdrs[i].sh_flags & SHF_ALLOC))
-			continue;
+			if (!(sechdrs[i].sh_flags & SHF_ALLOC))
+				continue;
 
-		dest = v->load_addr + sechdrs[i].sh_entsize;
+			dest = v->load_addr + sechdrs[i].sh_entsize;
 
-		if (sechdrs[i].sh_type != SHT_NOBITS)
-			memcpy(dest, (void *)sechdrs[i].sh_addr,
-			       sechdrs[i].sh_size);
-		/* Update sh_addr to point to copy in image. */
-		sechdrs[i].sh_addr = (unsigned long)dest;
-	}
+			if (sechdrs[i].sh_type != SHT_NOBITS)
+				memcpy(dest, (void *)sechdrs[i].sh_addr,
+				       sechdrs[i].sh_size);
+			/* Update sh_addr to point to copy in image. */
+			sechdrs[i].sh_addr = (unsigned long)dest;
 
-	/* Fix up syms, so that st_value is a pointer to location. */
-	err =
-		simplify_symbols(sechdrs, symindex, strtab, secstrings,
-				 hdr->e_shnum, &mod);
-	if (err < 0) {
-		printk(KERN_WARNING "VPE: unable to simplify symbols\n");
-		goto cleanup;
-	}
+			printk(KERN_DEBUG " section sh_name %s sh_addr 0x%x\n",
+			       secstrings + sechdrs[i].sh_name, sechdrs[i].sh_addr);
+		}
 
-	/* Now do relocations. */
-	for (i = 1; i < hdr->e_shnum; i++) {
-		const char *strtab = (char *)sechdrs[strindex].sh_addr;
-		unsigned int info = sechdrs[i].sh_info;
-
-		/* Not a valid relocation section? */
-		if (info >= hdr->e_shnum)
-			continue;
-
-		/* Don't bother with non-allocated sections */
-		if (!(sechdrs[info].sh_flags & SHF_ALLOC))
-			continue;
-
-		if (sechdrs[i].sh_type == SHT_REL)
-			err =
-				apply_relocations(sechdrs, strtab, symindex, i, &mod);
-		else if (sechdrs[i].sh_type == SHT_RELA)
-			err = apply_relocate_add(sechdrs, strtab, symindex, i,
-						 &mod);
-		if (err < 0) {
-			printk(KERN_WARNING
-			       "vpe_elfload: error in relocations err %ld\n",
-			       err);
-			goto cleanup;
+ 		/* Fix up syms, so that st_value is a pointer to location. */
+ 		simplify_symbols(sechdrs, symindex, strtab, secstrings,
+ 				 hdr->e_shnum, &mod);
+
+ 		/* Now do relocations. */
+ 		for (i = 1; i < hdr->e_shnum; i++) {
+ 			const char *strtab = (char *)sechdrs[strindex].sh_addr;
+ 			unsigned int info = sechdrs[i].sh_info;
+
+ 			/* Not a valid relocation section? */
+ 			if (info >= hdr->e_shnum)
+ 				continue;
+
+ 			/* Don't bother with non-allocated sections */
+ 			if (!(sechdrs[info].sh_flags & SHF_ALLOC))
+ 				continue;
+
+ 			if (sechdrs[i].sh_type == SHT_REL)
+ 				err = apply_relocations(sechdrs, strtab, symindex, i,
+ 							&mod);
+ 			else if (sechdrs[i].sh_type == SHT_RELA)
+ 				err = apply_relocate_add(sechdrs, strtab, symindex, i,
+ 							 &mod);
+ 			if (err < 0)
+ 				return err;
+
+  		}
+  	} else {
+  		for (i = 0; i < hdr->e_shnum; i++) {
+
+ 			/* Internal symbols and strings. */
+ 			if (sechdrs[i].sh_type == SHT_SYMTAB) {
+ 				symindex = i;
+ 				strindex = sechdrs[i].sh_link;
+ 				strtab = (char *)hdr + sechdrs[strindex].sh_offset;
+
+ 				/* mark the symtab's address for when we try to find the
+ 				   magic symbols */
+ 				sechdrs[i].sh_addr = (size_t) hdr + sechdrs[i].sh_offset;
+ 			}
+
+ 			/* filter sections we dont want in the final image */
+ 			if (!(sechdrs[i].sh_flags & SHF_ALLOC) ||
+ 			    (sechdrs[i].sh_type == SHT_MIPS_REGINFO)) {
+ 				printk( KERN_DEBUG " ignoring section, "
+ 					"name %s type %x address 0x%x \n",
+ 					secstrings + sechdrs[i].sh_name,
+ 					sechdrs[i].sh_type, sechdrs[i].sh_addr);
+ 				continue;
+ 			}
+
+  			if (sechdrs[i].sh_addr < (unsigned int)v->load_addr) {
+ 				printk( KERN_WARNING "VPE loader: "
+ 					"fully linked image has invalid section, "
+ 					"name %s type %x address 0x%x, before load "
+ 					"address of 0x%x\n",
+ 					secstrings + sechdrs[i].sh_name,
+ 					sechdrs[i].sh_type, sechdrs[i].sh_addr,
+ 					(unsigned int)v->load_addr);
+  				return -ENOEXEC;
+  			}
+
+ 			printk(KERN_DEBUG " copying section sh_name %s, sh_addr 0x%x "
+			       "size 0x%x0 from x%p\n",
+			       secstrings + sechdrs[i].sh_name, sechdrs[i].sh_addr,
+			       sechdrs[i].sh_size, hdr + sechdrs[i].sh_offset);
+
+  			if (sechdrs[i].sh_type != SHT_NOBITS)
+				memcpy((void *)sechdrs[i].sh_addr,
+				       (char *)hdr + sechdrs[i].sh_offset,
+ 				       sechdrs[i].sh_size);
+			else
+				memset((void *)sechdrs[i].sh_addr, 0, sechdrs[i].sh_size);
 		}
 	}
 
@@ -910,71 +997,104 @@ int vpe_elfload(struct vpe * v)
 			   (unsigned long)v->load_addr + v->len);
 
 	if ((find_vpe_symbols(v, sechdrs, symindex, strtab, &mod)) < 0) {
+		if (v->__start == 0) {
+			printk(KERN_WARNING "VPE loader: program does not contain "
+			       "a __start symbol\n");
+			return -ENOEXEC;
+		}
 
-		printk(KERN_WARNING
-		       "VPE: program doesn't contain __start or vpe_shared symbols\n");
-		err = -ENOEXEC;
+		if (v->shared_ptr == NULL)
+			printk(KERN_WARNING "VPE loader: "
+			       "program does not contain vpe_shared symbol.\n"
+			       " Unable to use AMVP (AP/SP) facilities.\n");
 	}
 
 	printk(" elf loaded\n");
-
-cleanup:
-	return err;
+	return 0;
 }
 
-static void dump_vpe(struct vpe * v)
+__attribute_used__ void dump_vpe(struct vpe * v)
 {
 	struct tc *t;
 
+	settc(v->minor);
+
 	printk(KERN_DEBUG "VPEControl 0x%lx\n", read_vpe_c0_vpecontrol());
 	printk(KERN_DEBUG "VPEConf0 0x%lx\n", read_vpe_c0_vpeconf0());
 
-	list_for_each_entry(t, &vpecontrol.tc_list, list) {
+	list_for_each_entry(t, &vpecontrol.tc_list, list)
 		dump_tc(t);
-	}
 }
 
-/* checks for VPE is unused and gets ready to load program	 */
+static void cleanup_tc(struct tc *tc)
+{
+	int tmp;
+
+	/* Put MVPE's into 'configuration state' */
+	set_c0_mvpcontrol(MVPCONTROL_VPC);
+
+	settc(tc->index);
+	tmp = read_tc_c0_tcstatus();
+
+	/* mark not allocated and not dynamically allocatable */
+	tmp &= ~(TCSTATUS_A | TCSTATUS_DA);
+	tmp |= TCSTATUS_IXMT;	/* interrupt exempt */
+	write_tc_c0_tcstatus(tmp);
+
+	write_tc_c0_tchalt(TCHALT_H);
+
+	/* bind it to anything other than VPE1 */
+	write_tc_c0_tcbind(read_tc_c0_tcbind() & ~TCBIND_CURVPE); // | TCBIND_CURVPE
+
+	clear_c0_mvpcontrol(MVPCONTROL_VPC);
+}
+
+static int getcwd(char *buff, int size)
+{
+	mm_segment_t old_fs;
+	int ret;
+
+	old_fs = get_fs();
+	set_fs(KERNEL_DS);
+
+	ret = sys_getcwd(buff,size);
+
+	set_fs(old_fs);
+
+	return ret;
+}
+
+/* checks VPE is unused and gets ready to load program  */
 static int vpe_open(struct inode *inode, struct file *filp)
 {
-	int minor;
+	int minor, ret;
 	struct vpe *v;
+	struct vpe_notifications *not;
 
 	/* assume only 1 device at the mo. */
-	if ((minor = MINOR(inode->i_rdev)) != 1) {
-		printk(KERN_WARNING "VPE: only vpe1 is supported\n");
+	if ((minor = iminor(inode)) != 1) {
+		printk(KERN_WARNING "VPE loader: only vpe1 is supported\n");
 		return -ENODEV;
 	}
 
 	if ((v = get_vpe(minor)) == NULL) {
-		printk(KERN_WARNING "VPE: unable to get vpe\n");
+		printk(KERN_WARNING "VPE loader: unable to get vpe\n");
 		return -ENODEV;
 	}
 
 	if (v->state != VPE_STATE_UNUSED) {
-		unsigned long tmp;
-		struct tc *t;
-
-		printk(KERN_WARNING "VPE: device %d already in use\n", minor);
-
 		dvpe();
-		dump_vpe(v);
-
-		printk(KERN_WARNING "VPE: re-initialising %d\n", minor);
-
-		release_progmem(v->load_addr);
 
-		t = get_tc(minor);
-		settc(minor);
-		tmp = read_tc_c0_tcstatus();
+		printk(KERN_DEBUG "VPE loader: tc in use dumping regs\n");
 
-		/* mark not allocated and not dynamically allocatable */
-		tmp &= ~(TCSTATUS_A | TCSTATUS_DA);
-		tmp |= TCSTATUS_IXMT;	/* interrupt exempt */
-		write_tc_c0_tcstatus(tmp);
+		dump_tc(get_tc(minor));
 
-		write_tc_c0_tchalt(TCHALT_H);
+		list_for_each_entry(not, &v->notify, list) {
+			not->stop(minor);
+		}
 
+		release_progmem(v->load_addr);
+		cleanup_tc(get_tc(minor));
 	}
 
 	// allocate it so when we get write ops we know it's expected.
@@ -986,6 +1106,24 @@ static int vpe_open(struct inode *inode, struct file *filp)
 	v->load_addr = NULL;
 	v->len = 0;
 
+	v->uid = filp->f_uid;
+	v->gid = filp->f_gid;
+
+#ifdef CONFIG_MIPS_APSP_KSPD
+	/* get kspd to tell us when a syscall_exit happens */
+	if (!kspd_events_reqd) {
+		kspd_notify(&kspd_events);
+		kspd_events_reqd++;
+	}
+#endif
+
+	v->cwd[0] = 0;
+	ret = getcwd(v->cwd, VPE_PATH_MAX);
+	if (ret < 0)
+		printk(KERN_WARNING "VPE loader: open, getcwd returned %d\n", ret);
+
+	v->shared_ptr = NULL;
+	v->__start = 0;
 	return 0;
 }
 
@@ -995,7 +1133,7 @@ static int vpe_release(struct inode *inode, struct file *filp)
 	struct vpe *v;
 	Elf_Ehdr *hdr;
 
-	minor = MINOR(inode->i_rdev);
+	minor = iminor(inode);
 	if ((v = get_vpe(minor)) == NULL)
 		return -ENODEV;
 
@@ -1006,14 +1144,22 @@ static int vpe_release(struct inode *inode, struct file *filp)
 		if (vpe_elfload(v) >= 0)
 			vpe_run(v);
 		else {
-			printk(KERN_WARNING "VPE: ELF load failed.\n");
+ 			printk(KERN_WARNING "VPE loader: ELF load failed.\n");
 			ret = -ENOEXEC;
 		}
 	} else {
-		printk(KERN_WARNING "VPE: only elf files are supported\n");
+ 		printk(KERN_WARNING "VPE loader: only elf files are supported\n");
 		ret = -ENOEXEC;
 	}
 
+	/* It's good to be able to run the SP and if it chokes have a look at
+	   the /dev/rt?. But if we reset the pointer to the shared struct we
+	   loose what has happened. So perhaps if garbage is sent to the vpe
+	   device, use it as a trigger for the reset. Hopefully a nice
+	   executable will be along shortly. */
+	if (ret < 0)
+		v->shared_ptr = NULL;
+
 	// cleanup any temp buffers
 	if (v->pbuffer)
 		vfree(v->pbuffer);
@@ -1028,26 +1174,24 @@ static ssize_t vpe_write(struct file *file, const char __user * buffer,
 	size_t ret = count;
 	struct vpe *v;
 
-	minor = MINOR(file->f_dentry->d_inode->i_rdev);
+	minor = iminor(file->f_dentry->d_inode);
 	if ((v = get_vpe(minor)) == NULL)
 		return -ENODEV;
 
 	if (v->pbuffer == NULL) {
-		printk(KERN_ERR "vpe_write: no pbuffer\n");
+		printk(KERN_ERR "VPE loader: no buffer for program\n");
 		return -ENOMEM;
 	}
 
 	if ((count + v->len) > v->plen) {
 		printk(KERN_WARNING
-		       "VPE Loader: elf size too big. Perhaps strip uneeded symbols\n");
+		       "VPE loader: elf size too big. Perhaps strip uneeded symbols\n");
 		return -ENOMEM;
 	}
 
 	count -= copy_from_user(v->pbuffer + v->len, buffer, count);
-	if (!count) {
-		printk("vpe_write: copy_to_user failed\n");
+	if (!count)
 		return -EFAULT;
-	}
 
 	v->len += count;
 	return ret;
@@ -1149,16 +1293,70 @@ void *vpe_get_shared(int index)
 {
 	struct vpe *v;
 
-	if ((v = get_vpe(index)) == NULL) {
-		printk(KERN_WARNING "vpe: invalid vpe index %d\n", index);
+	if ((v = get_vpe(index)) == NULL)
 		return NULL;
-	}
 
 	return v->shared_ptr;
 }
 
 EXPORT_SYMBOL(vpe_get_shared);
 
+int vpe_getuid(int index)
+{
+	struct vpe *v;
+
+	if ((v = get_vpe(index)) == NULL)
+		return -1;
+
+	return v->uid;
+}
+
+EXPORT_SYMBOL(vpe_getuid);
+
+int vpe_getgid(int index)
+{
+	struct vpe *v;
+
+	if ((v = get_vpe(index)) == NULL)
+		return -1;
+
+	return v->gid;
+}
+
+EXPORT_SYMBOL(vpe_getgid);
+
+int vpe_notify(int index, struct vpe_notifications *notify)
+{
+	struct vpe *v;
+
+	if ((v = get_vpe(index)) == NULL)
+		return -1;
+
+	list_add(&notify->list, &v->notify);
+	return 0;
+}
+
+EXPORT_SYMBOL(vpe_notify);
+
+char *vpe_getcwd(int index)
+{
+	struct vpe *v;
+
+	if ((v = get_vpe(index)) == NULL)
+		return NULL;
+
+	return v->cwd;
+}
+
+EXPORT_SYMBOL(vpe_getcwd);
+
+#ifdef CONFIG_MIPS_APSP_KSPD
+static void kspd_sp_exit( int sp_id)
+{
+	cleanup_tc(get_tc(sp_id));
+}
+#endif
+
 static int __init vpe_module_init(void)
 {
 	struct vpe *v = NULL;
@@ -1201,7 +1399,8 @@ static int __init vpe_module_init(void)
 				return -ENODEV;
 			}
 
-			list_add(&t->tc, &v->tc);	/* add the tc to the list of this vpe's tc's. */
+			/* add the tc to the list of this vpe's tc's. */
+			list_add(&t->tc, &v->tc);
 
 			/* deactivate all but vpe0 */
 			if (i != 0) {
@@ -1222,10 +1421,12 @@ static int __init vpe_module_init(void)
 						     ~(ST0_IM | ST0_IE | ST0_KSU))
 						    | ST0_CU0);
 
-				/* set config to be the same as vpe0, particularly kseg0 coherency alg */
+				/*
+				 * Set config to be the same as vpe0,
+				 * particularly kseg0 coherency alg
+				 */
 				write_vpe_c0_config(read_c0_config());
 			}
-
 		}
 
 		/* TC's */
@@ -1234,23 +1435,28 @@ static int __init vpe_module_init(void)
 		if (i != 0) {
 			unsigned long tmp;
 
-			/* tc 0 will of course be running.... */
-			if (i == 0)
-				t->state = TC_STATE_RUNNING;
-
 			settc(i);
 
-			/* bind a TC to each VPE, May as well put all excess TC's
-			   on the last VPE */
-			if (i >= (((val & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT) + 1))
-				write_tc_c0_tcbind(read_tc_c0_tcbind() |
-						   ((val & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT));
-			else
-				write_tc_c0_tcbind(read_tc_c0_tcbind() | i);
+			/* Any TC that is bound to VPE0 gets left as is - in case
+			   we are running SMTC on VPE0. A TC that is bound to any
+			   other VPE gets bound to VPE0, ideally I'd like to make
+			   it homeless but it doesn't appear to let me bind a TC
+			   to a non-existent VPE. Which is perfectly reasonable.
+
+			   The (un)bound state is visible to an EJTAG probe so may
+			   notify GDB...
+			*/
+
+			if (((tmp = read_tc_c0_tcbind()) & TCBIND_CURVPE)) {
+				/* tc is bound >vpe0 */
+				write_tc_c0_tcbind(tmp & ~TCBIND_CURVPE);
+
+				t->pvpe = get_vpe(0);	/* set the parent vpe */
+			}
 
 			tmp = read_tc_c0_tcstatus();
 
-			/* mark not allocated and not dynamically allocatable */
+			/* mark not activated and not dynamically allocatable */
 			tmp &= ~(TCSTATUS_A | TCSTATUS_DA);
 			tmp |= TCSTATUS_IXMT;	/* interrupt exempt */
 			write_tc_c0_tcstatus(tmp);
@@ -1262,6 +1468,9 @@ static int __init vpe_module_init(void)
 	/* release config state */
 	clear_c0_mvpcontrol(MVPCONTROL_VPC);
 
+#ifdef CONFIG_MIPS_APSP_KSPD
+	kspd_events.kspd_sp_exit = kspd_sp_exit;
+#endif
 	return 0;
 }
 
@@ -1281,5 +1490,5 @@ static void __exit vpe_module_exit(void)
 module_init(vpe_module_init);
 module_exit(vpe_module_exit);
 MODULE_DESCRIPTION("MIPS VPE Loader");
-MODULE_AUTHOR("Elizabeth Clarke, MIPS Technologies, Inc");
+MODULE_AUTHOR("Elizabeth Oldham, MIPS Technologies, Inc.");
 MODULE_LICENSE("GPL");
diff --git a/arch/mips/lasat/Makefile b/arch/mips/lasat/Makefile
index 0d5aec436725..99f5046fdf49 100644
--- a/arch/mips/lasat/Makefile
+++ b/arch/mips/lasat/Makefile
@@ -3,7 +3,7 @@
 #
 
 obj-y	 			+= reset.o setup.o prom.o lasat_board.o \
-				   at93c.o interrupt.o lasatIRQ.o
+				   at93c.o interrupt.o
 
 obj-$(CONFIG_LASAT_SYSCTL)	+= sysctl.o
 obj-$(CONFIG_DS1603)		+= ds1603.o
diff --git a/arch/mips/lasat/interrupt.c b/arch/mips/lasat/interrupt.c
index 852a41901a5e..2d3472b21ebb 100644
--- a/arch/mips/lasat/interrupt.c
+++ b/arch/mips/lasat/interrupt.c
@@ -27,14 +27,13 @@
 #include <asm/bootinfo.h>
 #include <asm/irq.h>
 #include <asm/lasat/lasatint.h>
+#include <asm/time.h>
 #include <asm/gdb-stub.h>
 
 static volatile int *lasat_int_status = NULL;
 static volatile int *lasat_int_mask = NULL;
 static volatile int lasat_int_mask_shift;
 
-extern asmlinkage void lasatIRQ(void);
-
 void disable_lasat_irq(unsigned int irq_nr)
 {
 	unsigned long flags;
@@ -109,11 +108,17 @@ static unsigned long get_int_status_200(void)
 	return int_status;
 }
 
-void lasat_hw0_irqdispatch(struct pt_regs *regs)
+asmlinkage void plat_irq_dispatch(struct pt_regs *regs)
 {
 	unsigned long int_status;
+	unsigned int cause = read_c0_cause();
 	int irq;
 
+	if (cause & CAUSEF_IP7) {	/* R4000 count / compare IRQ */
+		ll_timer_interrupt(7, regs);
+		return;
+	}
+
 	int_status = get_int_status();
 
 	/* if int_status == 0, then the interrupt has already been cleared */
@@ -147,9 +152,6 @@ void __init arch_init_irq(void)
 		panic("arch_init_irq: mips_machtype incorrect");
 	}
 
-	/* Now safe to set the exception vector. */
-	set_except_vector(0, lasatIRQ);
-
 	for (i = 0; i <= LASATINT_END; i++) {
 		irq_desc[i].status	= IRQ_DISABLED;
 		irq_desc[i].action	= 0;
diff --git a/arch/mips/lasat/lasatIRQ.S b/arch/mips/lasat/lasatIRQ.S
deleted file mode 100644
index 2a2b0d056561..000000000000
--- a/arch/mips/lasat/lasatIRQ.S
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 1999, 2000 MIPS Technologies, Inc.  All rights reserved.
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * Interrupt exception dispatch code.
- */
-#include <asm/asm.h>
-#include <asm/mipsregs.h>
-#include <asm/regdef.h>
-#include <asm/stackframe.h>
-
-	.text
-	.set	noreorder
-	.align	5
-	NESTED(lasatIRQ, PT_SIZE, sp)
-	.set	noat
-	SAVE_ALL
-	CLI
-	.set	at
-	.set	noreorder
-
-	mfc0	s0, CP0_CAUSE		# get irq mask
-
-	/* First we check for r4k counter/timer IRQ. */
-	andi	a0, s0, CAUSEF_IP7
-	beq	a0, zero, 1f
-	 andi	a0, s0, CAUSEF_IP2	# delay slot, check hw0 interrupt
-
-	/* Wheee, a timer interrupt. */
-	li	a0, 7
-	jal	ll_timer_interrupt
-	 move	a1, sp
-
-	j	ret_from_irq
-	 nop
-
-1:
-	/* Wheee, combined hardware level zero interrupt. */
-	jal	lasat_hw0_irqdispatch
-	 move	a0, sp			# delay slot
-
-	j	ret_from_irq
-	 nop				# delay slot
-
-1:
-	/*
-	 * Here by mistake?  This is possible, what can happen is that by the
-	 * time we take the exception the IRQ pin goes low, so just leave if
-	 * this is the case.
-	 */
-	move	a1,s0
-	mfc0	a1, CP0_EPC
-
-	j	ret_from_irq
-	 nop
-	END(lasatIRQ)
diff --git a/arch/mips/math-emu/dp_fint.c b/arch/mips/math-emu/dp_fint.c
index a1962eb460f8..39a71de16f47 100644
--- a/arch/mips/math-emu/dp_fint.c
+++ b/arch/mips/math-emu/dp_fint.c
@@ -29,7 +29,9 @@
 
 ieee754dp ieee754dp_fint(int x)
 {
-	COMPXDP;
+	u64 xm;
+	int xe;
+	int xs;
 
 	CLEARCX;
 
diff --git a/arch/mips/math-emu/dp_flong.c b/arch/mips/math-emu/dp_flong.c
index eae90a866aa1..f08f223e488a 100644
--- a/arch/mips/math-emu/dp_flong.c
+++ b/arch/mips/math-emu/dp_flong.c
@@ -29,7 +29,9 @@
 
 ieee754dp ieee754dp_flong(s64 x)
 {
-	COMPXDP;
+	u64 xm;
+	int xe;
+	int xs;
 
 	CLEARCX;
 
diff --git a/arch/mips/math-emu/sp_fint.c b/arch/mips/math-emu/sp_fint.c
index 7aac13afb09a..e88e125e01c2 100644
--- a/arch/mips/math-emu/sp_fint.c
+++ b/arch/mips/math-emu/sp_fint.c
@@ -29,7 +29,9 @@
 
 ieee754sp ieee754sp_fint(int x)
 {
-	COMPXSP;
+	unsigned xm;
+	int xe;
+	int xs;
 
 	CLEARCX;
 
diff --git a/arch/mips/math-emu/sp_flong.c b/arch/mips/math-emu/sp_flong.c
index 3d6c1d11c178..26d6919a269a 100644
--- a/arch/mips/math-emu/sp_flong.c
+++ b/arch/mips/math-emu/sp_flong.c
@@ -29,7 +29,9 @@
 
 ieee754sp ieee754sp_flong(s64 x)
 {
-	COMPXDP;		/* <--- need 64-bit mantissa temp */
+	u64 xm;		/* <--- need 64-bit mantissa temp */
+	int xe;
+	int xs;
 
 	CLEARCX;
 
diff --git a/arch/mips/mips-boards/atlas/atlas_int.c b/arch/mips/mips-boards/atlas/atlas_int.c
index bc0ebc69bfb3..db53950b7cfb 100644
--- a/arch/mips/mips-boards/atlas/atlas_int.c
+++ b/arch/mips/mips-boards/atlas/atlas_int.c
@@ -39,8 +39,6 @@
 
 static struct atlas_ictrl_regs *atlas_hw0_icregs;
 
-extern asmlinkage void mipsIRQ(void);
-
 #if 0
 #define DEBUG_INT(x...) printk(x)
 #else
@@ -98,7 +96,7 @@ static inline int ls1bit32(unsigned int x)
 	return b;
 }
 
-void atlas_hw0_irqdispatch(struct pt_regs *regs)
+static inline void atlas_hw0_irqdispatch(struct pt_regs *regs)
 {
 	unsigned long int_status;
 	int irq;
@@ -116,6 +114,91 @@ void atlas_hw0_irqdispatch(struct pt_regs *regs)
 	do_IRQ(irq, regs);
 }
 
+static inline int clz(unsigned long x)
+{
+	__asm__ (
+	"	.set	push					\n"
+	"	.set	mips32					\n"
+	"	clz	%0, %1					\n"
+	"	.set	pop					\n"
+	: "=r" (x)
+	: "r" (x));
+
+	return x;
+}
+
+/*
+ * Version of ffs that only looks at bits 12..15.
+ */
+static inline unsigned int irq_ffs(unsigned int pending)
+{
+#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64)
+	return -clz(pending) + 31 - CAUSEB_IP;
+#else
+	unsigned int a0 = 7;
+	unsigned int t0;
+
+	t0 = s0 & 0xf000;
+	t0 = t0 < 1;
+	t0 = t0 << 2;
+	a0 = a0 - t0;
+	s0 = s0 << t0;
+
+	t0 = s0 & 0xc000;
+	t0 = t0 < 1;
+	t0 = t0 << 1;
+	a0 = a0 - t0;
+	s0 = s0 << t0;
+
+	t0 = s0 & 0x8000;
+	t0 = t0 < 1;
+	//t0 = t0 << 2;
+	a0 = a0 - t0;
+	//s0 = s0 << t0;
+
+	return a0;
+#endif
+}
+
+/*
+ * IRQs on the Atlas board look basically (barring software IRQs which we
+ * don't use at all and all external interrupt sources are combined together
+ * on hardware interrupt 0 (MIPS IRQ 2)) like:
+ *
+ *	MIPS IRQ	Source
+ *      --------        ------
+ *             0	Software (ignored)
+ *             1        Software (ignored)
+ *             2        Combined hardware interrupt (hw0)
+ *             3        Hardware (ignored)
+ *             4        Hardware (ignored)
+ *             5        Hardware (ignored)
+ *             6        Hardware (ignored)
+ *             7        R4k timer (what we use)
+ *
+ * We handle the IRQ according to _our_ priority which is:
+ *
+ * Highest ----     R4k Timer
+ * Lowest  ----     Combined hardware interrupt
+ *
+ * then we just return, if multiple IRQs are pending then we will just take
+ * another exception, big deal.
+ */
+asmlinkage void plat_irq_dispatch(struct pt_regs *regs)
+{
+	unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM;
+	int irq;
+
+	irq = irq_ffs(pending);
+
+	if (irq == MIPSCPU_INT_ATLAS)
+		atlas_hw0_irqdispatch(regs);
+	else if (irq > 0)
+		do_IRQ(MIPSCPU_INT_BASE + irq, regs);
+	else
+		spurious_interrupt(regs);
+}
+
 void __init arch_init_irq(void)
 {
 	int i;
@@ -128,9 +211,6 @@ void __init arch_init_irq(void)
 	 */
 	atlas_hw0_icregs->intrsten = 0xffffffff;
 
-	/* Now safe to set the exception vector. */
-	set_except_vector(0, mipsIRQ);
-
 	for (i = ATLASINT_BASE; i <= ATLASINT_END; i++) {
 		irq_desc[i].status	= IRQ_DISABLED;
 		irq_desc[i].action	= 0;
diff --git a/arch/mips/mips-boards/generic/Makefile b/arch/mips/mips-boards/generic/Makefile
index b21bc6887fa8..be47c1c2bc80 100644
--- a/arch/mips/mips-boards/generic/Makefile
+++ b/arch/mips/mips-boards/generic/Makefile
@@ -18,8 +18,8 @@
 # Makefile for the MIPS boards generic routines under Linux.
 #
 
-obj-y				:= mipsIRQ.o reset.o display.o init.o memory.o \
-				   printf.o cmdline.o time.o
+obj-y				:= reset.o display.o init.o memory.o printf.o \
+				   cmdline.o time.o
 obj-$(CONFIG_PCI)		+= pci.o
 obj-$(CONFIG_KGDB)		+= gdb_hook.o
 
diff --git a/arch/mips/mips-boards/generic/gdb_hook.c b/arch/mips/mips-boards/generic/gdb_hook.c
index 91a2ccbe3730..6a1854de4579 100644
--- a/arch/mips/mips-boards/generic/gdb_hook.c
+++ b/arch/mips/mips-boards/generic/gdb_hook.c
@@ -25,7 +25,7 @@
 #include <asm/serial.h>
 #include <asm/io.h>
 
-static struct serial_state rs_table[RS_TABLE_SIZE] = {
+static struct serial_state rs_table[] = {
 	SERIAL_PORT_DFNS	/* Defined in serial.h */
 };
 
diff --git a/arch/mips/mips-boards/generic/init.c b/arch/mips/mips-boards/generic/init.c
index eab5a705e989..df4e94735604 100644
--- a/arch/mips/mips-boards/generic/init.c
+++ b/arch/mips/mips-boards/generic/init.c
@@ -220,7 +220,6 @@ void __init kgdb_config (void)
 				generic_putDebugChar (*s++);
 		}
 
-		kgdb_enabled = 1;
 		/* Breakpoint is invoked after interrupts are initialised */
 	}
 }
@@ -338,6 +337,7 @@ void __init prom_init(void)
 	case MIPS_REVISION_CORID_CORE_MSC:
 	case MIPS_REVISION_CORID_CORE_FPGA2:
 	case MIPS_REVISION_CORID_CORE_FPGA3:
+	case MIPS_REVISION_CORID_CORE_24K:
 	case MIPS_REVISION_CORID_CORE_EMUL_MSC:
 		_pcictrl_msc = (unsigned long)ioremap(MIPS_MSC01_PCI_REG_BASE, 0x2000);
 
diff --git a/arch/mips/mips-boards/generic/memory.c b/arch/mips/mips-boards/generic/memory.c
index 32c9210373ac..bc4d093685bb 100644
--- a/arch/mips/mips-boards/generic/memory.c
+++ b/arch/mips/mips-boards/generic/memory.c
@@ -22,10 +22,12 @@
 #include <linux/init.h>
 #include <linux/mm.h>
 #include <linux/bootmem.h>
+#include <linux/pfn.h>
 #include <linux/string.h>
 
 #include <asm/bootinfo.h>
 #include <asm/page.h>
+#include <asm/sections.h>
 
 #include <asm/mips-boards/prom.h>
 
@@ -46,9 +48,6 @@ static char *mtypes[3] = {
 };
 #endif
 
-/* References to section boundaries */
-extern char _end;
-
 struct prom_pmemblock * __init prom_getmdesc(void)
 {
 	char *memsize_str;
@@ -106,10 +105,10 @@ struct prom_pmemblock * __init prom_getmdesc(void)
 
 	mdesc[3].type = yamon_dontuse;
 	mdesc[3].base = 0x00100000;
-	mdesc[3].size = CPHYSADDR(PAGE_ALIGN(&_end)) - mdesc[3].base;
+	mdesc[3].size = CPHYSADDR(PFN_ALIGN((unsigned long)&_end)) - mdesc[3].base;
 
 	mdesc[4].type = yamon_free;
-	mdesc[4].base = CPHYSADDR(PAGE_ALIGN(&_end));
+	mdesc[4].base = CPHYSADDR(PFN_ALIGN(&_end));
 	mdesc[4].size = memsize - mdesc[4].base;
 
 	return &mdesc[0];
diff --git a/arch/mips/mips-boards/generic/mipsIRQ.S b/arch/mips/mips-boards/generic/mipsIRQ.S
deleted file mode 100644
index ddd5c73a2971..000000000000
--- a/arch/mips/mips-boards/generic/mipsIRQ.S
+++ /dev/null
@@ -1,155 +0,0 @@
-/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 1999, 2000 MIPS Technologies, Inc.  All rights reserved.
- *
- * ########################################################################
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * ########################################################################
- *
- * Interrupt exception dispatch code.
- *
- */
-#include <linux/config.h>
-
-#include <asm/asm.h>
-#include <asm/mipsregs.h>
-#include <asm/regdef.h>
-#include <asm/stackframe.h>
-
-#ifdef CONFIG_MIPS_ATLAS
-#include <asm/mips-boards/atlasint.h>
-#define CASCADE_IRQ		MIPSCPU_INT_ATLAS
-#define CASCADE_DISPATCH	atlas_hw0_irqdispatch
-#endif
-#ifdef CONFIG_MIPS_MALTA
-#include <asm/mips-boards/maltaint.h>
-#define CASCADE_IRQ		MIPSCPU_INT_I8259A
-#define CASCADE_DISPATCH	malta_hw0_irqdispatch
-#endif
-#ifdef CONFIG_MIPS_SEAD
-#include <asm/mips-boards/seadint.h>
-#endif
-
-/* A lot of complication here is taken away because:
- *
- * 1) We handle one interrupt and return, sitting in a loop and moving across
- *    all the pending IRQ bits in the cause register is _NOT_ the answer, the
- *    common case is one pending IRQ so optimize in that direction.
- *
- * 2) We need not check against bits in the status register IRQ mask, that
- *    would make this routine slow as hell.
- *
- * 3) Linux only thinks in terms of all IRQs on or all IRQs off, nothing in
- *    between like BSD spl() brain-damage.
- *
- * Furthermore, the IRQs on the MIPS board look basically (barring software
- * IRQs which we don't use at all and all external interrupt sources are
- * combined together on hardware interrupt 0 (MIPS IRQ 2)) like:
- *
- *	MIPS IRQ	Source
- *      --------        ------
- *             0	Software (ignored)
- *             1        Software (ignored)
- *             2        Combined hardware interrupt (hw0)
- *             3        Hardware (ignored)
- *             4        Hardware (ignored)
- *             5        Hardware (ignored)
- *             6        Hardware (ignored)
- *             7        R4k timer (what we use)
- *
- * Note: On the SEAD board thing are a little bit different.
- *       Here IRQ 2 (hw0) is wired to the UART0 and IRQ 3 (hw1) is wired
- *       wired to UART1.
- *
- * We handle the IRQ according to _our_ priority which is:
- *
- * Highest ----     R4k Timer
- * Lowest  ----     Combined hardware interrupt
- *
- * then we just return, if multiple IRQs are pending then we will just take
- * another exception, big deal.
- */
-
-	.text
-	.set	noreorder
-	.set	noat
-	.align	5
-	NESTED(mipsIRQ, PT_SIZE, sp)
-	SAVE_ALL
-	CLI
-	.set	at
-
-	mfc0	s0, CP0_CAUSE		# get irq bits
-	mfc0	s1, CP0_STATUS		# get irq mask
-	andi	s0, ST0_IM		# CAUSE.CE may be non-zero!
-	and	s0, s1
-
-#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64)
-	.set	mips32
-	clz	a0, s0
-	.set	mips0
-	negu	a0
-	addu	a0, 31-CAUSEB_IP
-	bltz	a0, spurious
-#else
-	beqz	s0, spurious
-	 li	a0, 7
-
-	and	t0, s0, 0xf000
-	sltiu	t0, t0, 1
-	sll	t0, 2
-	subu	a0, t0
-	sll	s0, t0
-
-	and	t0, s0, 0xc000
-	sltiu	t0, t0, 1
-	sll	t0, 1
-	subu	a0, t0
-	sll	s0, t0
-
-	and	t0, s0, 0x8000
-	sltiu	t0, t0, 1
-	# sll	t0, 0
-	subu	a0, t0
-	# sll	s0, t0
-#endif
-
-#ifdef CASCADE_IRQ
-	 li	a1, CASCADE_IRQ
-	bne	a0, a1, 1f
-	 addu	a0, MIPSCPU_INT_BASE
-
-	jal	CASCADE_DISPATCH
-	 move	 a0, sp
-
-	j	ret_from_irq
-	 nop
-1:
-#else
-	 addu	a0, MIPSCPU_INT_BASE
-#endif
-
-	jal	do_IRQ
-	 move	a1, sp
-
-	j	ret_from_irq
-	 nop
-
-
-spurious:
-	j	spurious_interrupt
-	 nop
-	END(mipsIRQ)
diff --git a/arch/mips/mips-boards/generic/pci.c b/arch/mips/mips-boards/generic/pci.c
index 1f6f9df74ab2..9337f6c8873a 100644
--- a/arch/mips/mips-boards/generic/pci.c
+++ b/arch/mips/mips-boards/generic/pci.c
@@ -198,6 +198,7 @@ void __init mips_pcibios_init(void)
 	case MIPS_REVISION_CORID_CORE_MSC:
 	case MIPS_REVISION_CORID_CORE_FPGA2:
 	case MIPS_REVISION_CORID_CORE_FPGA3:
+	case MIPS_REVISION_CORID_CORE_24K:
 	case MIPS_REVISION_CORID_CORE_EMUL_MSC:
 		/* Set up resource ranges from the controller's registers.  */
 		MSC_READ(MSC01_PCI_SC2PMBASL, start);
diff --git a/arch/mips/mips-boards/generic/time.c b/arch/mips/mips-boards/generic/time.c
index 93f3bf2c2b22..a9f6124b3a22 100644
--- a/arch/mips/mips-boards/generic/time.c
+++ b/arch/mips/mips-boards/generic/time.c
@@ -30,6 +30,7 @@
 #include <linux/mc146818rtc.h>
 
 #include <asm/mipsregs.h>
+#include <asm/mipsmtregs.h>
 #include <asm/ptrace.h>
 #include <asm/hardirq.h>
 #include <asm/irq.h>
@@ -50,16 +51,23 @@ unsigned long cpu_khz;
 static char display_string[] = "        LINUX ON ATLAS       ";
 #endif
 #if defined(CONFIG_MIPS_MALTA)
+#if defined(CONFIG_MIPS_MT_SMTC)
+static char display_string[] = "       SMTC LINUX ON MALTA       ";
+#else
 static char display_string[] = "        LINUX ON MALTA       ";
+#endif /* CONFIG_MIPS_MT_SMTC */
 #endif
 #if defined(CONFIG_MIPS_SEAD)
 static char display_string[] = "        LINUX ON SEAD       ";
 #endif
-static unsigned int display_count = 0;
+static unsigned int display_count;
 #define MAX_DISPLAY_COUNT (sizeof(display_string) - 8)
 
-static unsigned int timer_tick_count=0;
+#define CPUCTR_IMASKBIT (0x100 << MIPSCPU_INT_CPUCTR)
+
+static unsigned int timer_tick_count;
 static int mips_cpu_timer_irq;
+extern void smtc_timer_broadcast(int);
 
 static inline void scroll_display_message(void)
 {
@@ -75,15 +83,55 @@ static void mips_timer_dispatch (struct pt_regs *regs)
 	do_IRQ (mips_cpu_timer_irq, regs);
 }
 
+/*
+ * Redeclare until I get around mopping the timer code insanity on MIPS.
+ */
 extern int null_perf_irq(struct pt_regs *regs);
 
 extern int (*perf_irq)(struct pt_regs *regs);
 
 irqreturn_t mips_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 {
-	int r2 = cpu_has_mips_r2;
 	int cpu = smp_processor_id();
+	int r2 = cpu_has_mips_r2;
+
+#ifdef CONFIG_MIPS_MT_SMTC
+        /*
+	 *  In an SMTC system, one Count/Compare set exists per VPE.
+	 *  Which TC within a VPE gets the interrupt is essentially
+	 *  random - we only know that it shouldn't be one with
+	 *  IXMT set. Whichever TC gets the interrupt needs to
+	 *  send special interprocessor interrupts to the other
+	 *  TCs to make sure that they schedule, etc.
+	 *
+	 *  That code is specific to the SMTC kernel, not to
+	 *  the a particular platform, so it's invoked from
+	 *  the general MIPS timer_interrupt routine.
+	 */
+
+	/*
+	 * DVPE is necessary so long as cross-VPE interrupts
+	 * are done via read-modify-write of Cause register.
+	 */
+	int vpflags = dvpe();
+	write_c0_compare (read_c0_count() - 1);
+	clear_c0_cause(CPUCTR_IMASKBIT);
+	evpe(vpflags);
+
+	if (cpu_data[cpu].vpe_id == 0) {
+		timer_interrupt(irq, dev_id, regs);
+		scroll_display_message();
+	} else
+		write_c0_compare (read_c0_count() + ( mips_hpt_frequency/HZ));
+	smtc_timer_broadcast(cpu_data[cpu].vpe_id);
 
+	if (cpu != 0)
+		/*
+		 * Other CPUs should do profiling and process accounting
+		 */
+		local_timer_interrupt(irq, dev_id, regs);
+
+#else /* CONFIG_MIPS_MT_SMTC */
 	if (cpu == 0) {
 		/*
 		 * CPU 0 handles the global timer interrupt job and process
@@ -107,12 +155,14 @@ irqreturn_t mips_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 		 * More support needs to be added to kernel/time for
 		 * counter/timer interrupts on multiple CPU's
 		 */
-		write_c0_compare (read_c0_count() + (mips_hpt_frequency/HZ));
+		write_c0_compare(read_c0_count() + (mips_hpt_frequency/HZ));
+
 		/*
-		 * other CPUs should do profiling and process accounting
+		 * Other CPUs should do profiling and process accounting
 		 */
-		local_timer_interrupt (irq, dev_id, regs);
+		local_timer_interrupt(irq, dev_id, regs);
 	}
+#endif /* CONFIG_MIPS_MT_SMTC */
 
 out:
 	return IRQ_HANDLED;
@@ -126,7 +176,7 @@ static unsigned int __init estimate_cpu_frequency(void)
 	unsigned int prid = read_c0_prid() & 0xffff00;
 	unsigned int count;
 
-#ifdef CONFIG_MIPS_SEAD
+#if defined(CONFIG_MIPS_SEAD) || defined(CONFIG_MIPS_SIM)
 	/*
 	 * The SEAD board doesn't have a real time clock, so we can't
 	 * really calculate the timer frequency
@@ -211,7 +261,11 @@ void __init mips_timer_setup(struct irqaction *irq)
 
 	/* we are using the cpu counter for timer interrupts */
 	irq->handler = mips_timer_interrupt;	/* we use our own handler */
+#ifdef CONFIG_MIPS_MT_SMTC
+	setup_irq_smtc(mips_cpu_timer_irq, irq, CPUCTR_IMASKBIT);
+#else
 	setup_irq(mips_cpu_timer_irq, irq);
+#endif /* CONFIG_MIPS_MT_SMTC */
 
 #ifdef CONFIG_SMP
 	/* irq_desc(riptor) is a global resource, when the interrupt overlaps
diff --git a/arch/mips/mips-boards/malta/Makefile b/arch/mips/mips-boards/malta/Makefile
index fd4c143c0e2f..77ee5c6d33c1 100644
--- a/arch/mips/mips-boards/malta/Makefile
+++ b/arch/mips/mips-boards/malta/Makefile
@@ -20,3 +20,4 @@
 #
 
 obj-y := malta_int.o malta_setup.o
+obj-$(CONFIG_SMP) += malta_smp.o
diff --git a/arch/mips/mips-boards/malta/malta_int.c b/arch/mips/mips-boards/malta/malta_int.c
index d06dc5ad6c9e..7cc0ba4f553a 100644
--- a/arch/mips/mips-boards/malta/malta_int.c
+++ b/arch/mips/mips-boards/malta/malta_int.c
@@ -40,7 +40,6 @@
 #include <asm/mips-boards/msc01_pci.h>
 #include <asm/msc01_ic.h>
 
-extern asmlinkage void mipsIRQ(void);
 extern void mips_timer_interrupt(void);
 
 static DEFINE_SPINLOCK(mips_irq_lock);
@@ -58,6 +57,7 @@ static inline int mips_pcibios_iack(void)
 	case MIPS_REVISION_CORID_CORE_MSC:
 	case MIPS_REVISION_CORID_CORE_FPGA2:
 	case MIPS_REVISION_CORID_CORE_FPGA3:
+	case MIPS_REVISION_CORID_CORE_24K:
 	case MIPS_REVISION_CORID_CORE_EMUL_MSC:
 	        MSC_READ(MSC01_PCI_IACK, irq);
 		irq &= 0xff;
@@ -114,13 +114,14 @@ static inline int get_int(void)
 	return irq;
 }
 
-void malta_hw0_irqdispatch(struct pt_regs *regs)
+static void malta_hw0_irqdispatch(struct pt_regs *regs)
 {
 	int irq;
 
 	irq = get_int();
-	if (irq < 0)
+	if (irq < 0) {
 		return;  /* interrupt has already been cleared */
+	}
 
 	do_IRQ(MALTA_INT_BASE+irq, regs);
 }
@@ -143,6 +144,7 @@ void corehi_irqdispatch(struct pt_regs *regs)
         case MIPS_REVISION_CORID_CORE_MSC:
         case MIPS_REVISION_CORID_CORE_FPGA2:
         case MIPS_REVISION_CORID_CORE_FPGA3:
+        case MIPS_REVISION_CORID_CORE_24K:
         case MIPS_REVISION_CORID_CORE_EMUL_MSC:
                 ll_msc_irq(regs);
                 break;
@@ -182,6 +184,92 @@ void corehi_irqdispatch(struct pt_regs *regs)
         die("CoreHi interrupt", regs);
 }
 
+static inline int clz(unsigned long x)
+{
+	__asm__ (
+	"	.set	push					\n"
+	"	.set	mips32					\n"
+	"	clz	%0, %1					\n"
+	"	.set	pop					\n"
+	: "=r" (x)
+	: "r" (x));
+
+	return x;
+}
+
+/*
+ * Version of ffs that only looks at bits 12..15.
+ */
+static inline unsigned int irq_ffs(unsigned int pending)
+{
+#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64)
+	return -clz(pending) + 31 - CAUSEB_IP;
+#else
+	unsigned int a0 = 7;
+	unsigned int t0;
+
+	t0 = s0 & 0xf000;
+	t0 = t0 < 1;
+	t0 = t0 << 2;
+	a0 = a0 - t0;
+	s0 = s0 << t0;
+
+	t0 = s0 & 0xc000;
+	t0 = t0 < 1;
+	t0 = t0 << 1;
+	a0 = a0 - t0;
+	s0 = s0 << t0;
+
+	t0 = s0 & 0x8000;
+	t0 = t0 < 1;
+	//t0 = t0 << 2;
+	a0 = a0 - t0;
+	//s0 = s0 << t0;
+
+	return a0;
+#endif
+}
+
+/*
+ * IRQs on the Malta board look basically (barring software IRQs which we
+ * don't use at all and all external interrupt sources are combined together
+ * on hardware interrupt 0 (MIPS IRQ 2)) like:
+ *
+ *	MIPS IRQ	Source
+ *      --------        ------
+ *             0	Software (ignored)
+ *             1        Software (ignored)
+ *             2        Combined hardware interrupt (hw0)
+ *             3        Hardware (ignored)
+ *             4        Hardware (ignored)
+ *             5        Hardware (ignored)
+ *             6        Hardware (ignored)
+ *             7        R4k timer (what we use)
+ *
+ * We handle the IRQ according to _our_ priority which is:
+ *
+ * Highest ----     R4k Timer
+ * Lowest  ----     Combined hardware interrupt
+ *
+ * then we just return, if multiple IRQs are pending then we will just take
+ * another exception, big deal.
+ */
+
+asmlinkage void plat_irq_dispatch(struct pt_regs *regs)
+{
+	unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM;
+	int irq;
+
+	irq = irq_ffs(pending);
+
+	if (irq == MIPSCPU_INT_I8259A)
+		malta_hw0_irqdispatch(regs);
+	else if (irq > 0)
+		do_IRQ(MIPSCPU_INT_BASE + irq, regs);
+	else
+		spurious_interrupt(regs);
+}
+
 static struct irqaction i8259irq = {
 	.handler = no_action,
 	.name = "XT-PIC cascade"
@@ -214,7 +302,6 @@ int __initdata msc_nr_eicirqs = sizeof(msc_eicirqmap)/sizeof(msc_irqmap_t);
 
 void __init arch_init_irq(void)
 {
-	set_except_vector(0, mipsIRQ);
 	init_i8259_irqs();
 
 	if (!cpu_has_veic)
@@ -224,6 +311,7 @@ void __init arch_init_irq(void)
         case MIPS_REVISION_CORID_CORE_MSC:
         case MIPS_REVISION_CORID_CORE_FPGA2:
         case MIPS_REVISION_CORID_CORE_FPGA3:
+        case MIPS_REVISION_CORID_CORE_24K:
         case MIPS_REVISION_CORID_CORE_EMUL_MSC:
 		if (cpu_has_veic)
 			init_msc_irqs (MSC01E_INT_BASE, msc_eicirqmap, msc_nr_eicirqs);
@@ -240,12 +328,17 @@ void __init arch_init_irq(void)
 	else if (cpu_has_vint) {
 		set_vi_handler (MIPSCPU_INT_I8259A, malta_hw0_irqdispatch);
 		set_vi_handler (MIPSCPU_INT_COREHI, corehi_irqdispatch);
-
+#ifdef CONFIG_MIPS_MT_SMTC
+		setup_irq_smtc (MIPSCPU_INT_BASE+MIPSCPU_INT_I8259A, &i8259irq,
+			(0x100 << MIPSCPU_INT_I8259A));
+		setup_irq_smtc (MIPSCPU_INT_BASE+MIPSCPU_INT_COREHI,
+			&corehi_irqaction, (0x100 << MIPSCPU_INT_COREHI));
+#else /* Not SMTC */
 		setup_irq (MIPSCPU_INT_BASE+MIPSCPU_INT_I8259A, &i8259irq);
 		setup_irq (MIPSCPU_INT_BASE+MIPSCPU_INT_COREHI, &corehi_irqaction);
+#endif /* CONFIG_MIPS_MT_SMTC */
 	}
 	else {
-		set_except_vector(0, mipsIRQ);
 		setup_irq (MIPSCPU_INT_BASE+MIPSCPU_INT_I8259A, &i8259irq);
 		setup_irq (MIPSCPU_INT_BASE+MIPSCPU_INT_COREHI, &corehi_irqaction);
 	}
diff --git a/arch/mips/mips-boards/malta/malta_smp.c b/arch/mips/mips-boards/malta/malta_smp.c
new file mode 100644
index 000000000000..6c6c8eeedbce
--- /dev/null
+++ b/arch/mips/mips-boards/malta/malta_smp.c
@@ -0,0 +1,128 @@
+/*
+ * Malta Platform-specific hooks for SMP operation
+ */
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/cpumask.h>
+#include <linux/interrupt.h>
+
+#include <asm/atomic.h>
+#include <asm/cpu.h>
+#include <asm/processor.h>
+#include <asm/system.h>
+#include <asm/hardirq.h>
+#include <asm/mmu_context.h>
+#include <asm/smp.h>
+#ifdef CONFIG_MIPS_MT_SMTC
+#include <asm/smtc_ipi.h>
+#endif /* CONFIG_MIPS_MT_SMTC */
+
+/* VPE/SMP Prototype implements platform interfaces directly */
+#if !defined(CONFIG_MIPS_MT_SMP)
+
+/*
+ * Cause the specified action to be performed on a targeted "CPU"
+ */
+
+void core_send_ipi(int cpu, unsigned int action)
+{
+/* "CPU" may be TC of same VPE, VPE of same CPU, or different CPU */
+#ifdef CONFIG_MIPS_MT_SMTC
+	smtc_send_ipi(cpu, LINUX_SMP_IPI, action);
+#endif /* CONFIG_MIPS_MT_SMTC */
+}
+
+/*
+ * Detect available CPUs/VPEs/TCs and populate phys_cpu_present_map
+ */
+
+void __init prom_build_cpu_map(void)
+{
+	int nextslot;
+
+	/*
+	 * As of November, 2004, MIPSsim only simulates one core
+	 * at a time.  However, that core may be a MIPS MT core
+	 * with multiple virtual processors and thread contexts.
+	 */
+
+	if (read_c0_config3() & (1<<2)) {
+		nextslot = mipsmt_build_cpu_map(1);
+	}
+}
+
+/*
+ * Platform "CPU" startup hook
+ */
+
+void prom_boot_secondary(int cpu, struct task_struct *idle)
+{
+#ifdef CONFIG_MIPS_MT_SMTC
+	smtc_boot_secondary(cpu, idle);
+#endif /* CONFIG_MIPS_MT_SMTC */
+}
+
+/*
+ * Post-config but pre-boot cleanup entry point
+ */
+
+void prom_init_secondary(void)
+{
+#ifdef CONFIG_MIPS_MT_SMTC
+        void smtc_init_secondary(void);
+	int myvpe;
+
+	/* Don't enable Malta I/O interrupts (IP2) for secondary VPEs */
+	myvpe = read_c0_tcbind() & TCBIND_CURVPE;
+	if (myvpe != 0) {
+		/* Ideally, this should be done only once per VPE, but... */
+		clear_c0_status(STATUSF_IP2);
+		set_c0_status(STATUSF_IP0 | STATUSF_IP1 | STATUSF_IP3
+				| STATUSF_IP4 | STATUSF_IP5 | STATUSF_IP6
+				| STATUSF_IP7);
+	}
+
+        smtc_init_secondary();
+#endif /* CONFIG_MIPS_MT_SMTC */
+}
+
+/*
+ * Platform SMP pre-initialization
+ *
+ * As noted above, we can assume a single CPU for now
+ * but it may be multithreaded.
+ */
+
+void plat_smp_setup(void)
+{
+	if (read_c0_config3() & (1<<2))
+		mipsmt_build_cpu_map(0);
+}
+
+void __init plat_prepare_cpus(unsigned int max_cpus)
+{
+	if (read_c0_config3() & (1<<2))
+		mipsmt_prepare_cpus();
+}
+
+/*
+ * SMP initialization finalization entry point
+ */
+
+void prom_smp_finish(void)
+{
+#ifdef CONFIG_MIPS_MT_SMTC
+	smtc_smp_finish();
+#endif /* CONFIG_MIPS_MT_SMTC */
+}
+
+/*
+ * Hook for after all CPUs are online
+ */
+
+void prom_cpus_done(void)
+{
+}
+
+#endif /* CONFIG_MIPS32R2_MT_SMP */
diff --git a/arch/mips/mips-boards/sead/sead_int.c b/arch/mips/mips-boards/sead/sead_int.c
index 90fda0d9915f..9168d934c661 100644
--- a/arch/mips/mips-boards/sead/sead_int.c
+++ b/arch/mips/mips-boards/sead/sead_int.c
@@ -24,16 +24,94 @@
 #include <linux/irq.h>
 
 #include <asm/irq_cpu.h>
+#include <asm/mipsregs.h>
 #include <asm/system.h>
 
 #include <asm/mips-boards/seadint.h>
 
-extern asmlinkage void mipsIRQ(void);
+static inline int clz(unsigned long x)
+{
+	__asm__ (
+	"	.set	push					\n"
+	"	.set	mips32					\n"
+	"	clz	%0, %1					\n"
+	"	.set	pop					\n"
+	: "=r" (x)
+	: "r" (x));
+
+	return x;
+}
+
+/*
+ * Version of ffs that only looks at bits 12..15.
+ */
+static inline unsigned int irq_ffs(unsigned int pending)
+{
+#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64)
+	return -clz(pending) + 31 - CAUSEB_IP;
+#else
+	unsigned int a0 = 7;
+	unsigned int t0;
+
+	t0 = s0 & 0xf000;
+	t0 = t0 < 1;
+	t0 = t0 << 2;
+	a0 = a0 - t0;
+	s0 = s0 << t0;
+
+	t0 = s0 & 0xc000;
+	t0 = t0 < 1;
+	t0 = t0 << 1;
+	a0 = a0 - t0;
+	s0 = s0 << t0;
+
+	t0 = s0 & 0x8000;
+	t0 = t0 < 1;
+	//t0 = t0 << 2;
+	a0 = a0 - t0;
+	//s0 = s0 << t0;
+
+	return a0;
+#endif
+}
+
+/*
+ * IRQs on the SEAD board look basically are combined together on hardware
+ * interrupt 0 (MIPS IRQ 2)) like:
+ *
+ *	MIPS IRQ	Source
+ *      --------        ------
+ *             0	Software (ignored)
+ *             1        Software (ignored)
+ *             2        UART0 (hw0)
+ *             3        UART1 (hw1)
+ *             4        Hardware (ignored)
+ *             5        Hardware (ignored)
+ *             6        Hardware (ignored)
+ *             7        R4k timer (what we use)
+ *
+ * We handle the IRQ according to _our_ priority which is:
+ *
+ * Highest ----     R4k Timer
+ * Lowest  ----     Combined hardware interrupt
+ *
+ * then we just return, if multiple IRQs are pending then we will just take
+ * another exception, big deal.
+ */
+asmlinkage void plat_irq_dispatch(struct pt_regs *regs)
+{
+	unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM;
+	int irq;
+
+	irq = irq_ffs(pending);
+
+	if (irq >= 0)
+		do_IRQ(MIPSCPU_INT_BASE + irq, regs);
+	else
+		spurious_interrupt(regs);
+}
 
 void __init arch_init_irq(void)
 {
 	mips_cpu_irq_init(MIPSCPU_INT_BASE);
-
-	/* Now safe to set the exception vector. */
-	set_except_vector(0, mipsIRQ);
 }
diff --git a/arch/mips/mips-boards/sim/cmdline.c b/arch/mips/mips-boards/sim/cmdline.c
deleted file mode 100644
index fef9fbd8e710..000000000000
--- a/arch/mips/mips-boards/sim/cmdline.c
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
- *
- * This program is free software; you can distribute it and/or modify it
- * under the terms of the GNU General Public License (Version 2) as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * Kernel command line creation using the prom monitor (YAMON) argc/argv.
- */
-#include <linux/init.h>
-#include <linux/string.h>
-
-#include <asm/bootinfo.h>
-
-extern int prom_argc;
-extern int *_prom_argv;
-
-/*
- * YAMON (32-bit PROM) pass arguments and environment as 32-bit pointer.
- * This macro take care of sign extension.
- */
-#define prom_argv(index) ((char *)(((int *)(int)_prom_argv)[(index)]))
-
-char arcs_cmdline[CL_SIZE];
-
-char * __init prom_getcmdline(void)
-{
-	return &(arcs_cmdline[0]);
-}
-
-
-void  __init prom_init_cmdline(void)
-{
-	char *cp;
-	int actr;
-
-	actr = 1; /* Always ignore argv[0] */
-
-	cp = &(arcs_cmdline[0]);
-	while(actr < prom_argc) {
-	        strcpy(cp, prom_argv(actr));
-		cp += strlen(prom_argv(actr));
-		*cp++ = ' ';
-		actr++;
-	}
-	if (cp != &(arcs_cmdline[0])) /* get rid of trailing space */
-		--cp;
-	*cp = '\0';
-}
diff --git a/arch/mips/mips-boards/sim/sim_cmdline.c b/arch/mips/mips-boards/sim/sim_cmdline.c
index 9df37c6fca36..c63021a5dc6c 100644
--- a/arch/mips/mips-boards/sim/sim_cmdline.c
+++ b/arch/mips/mips-boards/sim/sim_cmdline.c
@@ -26,8 +26,10 @@ char * __init prom_getcmdline(void)
 	return arcs_cmdline;
 }
 
-
 void  __init prom_init_cmdline(void)
 {
-    /* nothing to do */
+	char *cp;
+	cp = arcs_cmdline;
+	/* Get boot line from environment? */
+	*cp = '\0';
 }
diff --git a/arch/mips/mips-boards/sim/sim_int.c b/arch/mips/mips-boards/sim/sim_int.c
index a4d0a2c05031..2c15c8efec4e 100644
--- a/arch/mips/mips-boards/sim/sim_int.c
+++ b/arch/mips/mips-boards/sim/sim_int.c
@@ -25,17 +25,71 @@
 
 extern void mips_cpu_irq_init(int);
 
-extern asmlinkage void simIRQ(void);
+static inline int clz(unsigned long x)
+{
+	__asm__ (
+	"	.set	push					\n"
+	"	.set	mips32					\n"
+	"	clz	%0, %1					\n"
+	"	.set	pop					\n"
+	: "=r" (x)
+	: "r" (x));
+
+	return x;
+}
+
+/*
+ * Version of ffs that only looks at bits 12..15.
+ */
+static inline unsigned int irq_ffs(unsigned int pending)
+{
+#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64)
+	return -clz(pending) + 31 - CAUSEB_IP;
+#else
+	unsigned int a0 = 7;
+	unsigned int t0;
+
+	t0 = s0 & 0xf000;
+	t0 = t0 < 1;
+	t0 = t0 << 2;
+	a0 = a0 - t0;
+	s0 = s0 << t0;
+
+	t0 = s0 & 0xc000;
+	t0 = t0 < 1;
+	t0 = t0 << 1;
+	a0 = a0 - t0;
+	s0 = s0 << t0;
 
-asmlinkage void sim_hw0_irqdispatch(struct pt_regs *regs)
+	t0 = s0 & 0x8000;
+	t0 = t0 < 1;
+	//t0 = t0 << 2;
+	a0 = a0 - t0;
+	//s0 = s0 << t0;
+
+	return a0;
+#endif
+}
+
+static inline void sim_hw0_irqdispatch(struct pt_regs *regs)
 {
 	do_IRQ(2, regs);
 }
 
-void __init arch_init_irq(void)
+asmlinkage void plat_irq_dispatch(struct pt_regs *regs)
 {
-	/* Now safe to set the exception vector. */
-	set_except_vector(0, simIRQ);
+	unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM;
+	int irq;
+
+	irq = irq_ffs(pending);
 
+	if (irq > 0)
+		do_IRQ(MIPSCPU_INT_BASE + irq, regs);
+	else
+		spurious_interrupt(regs);
+}
+
+void __init arch_init_irq(void)
+{
 	mips_cpu_irq_init(MIPSCPU_INT_BASE);
 }
diff --git a/arch/mips/mips-boards/sim/sim_irq.S b/arch/mips/mips-boards/sim/sim_irq.S
index da52297a2216..d16cf3822076 100644
--- a/arch/mips/mips-boards/sim/sim_irq.S
+++ b/arch/mips/mips-boards/sim/sim_irq.S
@@ -94,6 +94,8 @@
 
 
 spurious:
-	j	spurious_interrupt
+	jal	spurious_interrupt
+	 nop
+	j	ret_from_irq
 	 nop
 	END(simIRQ)
diff --git a/arch/mips/mips-boards/sim/sim_mem.c b/arch/mips/mips-boards/sim/sim_mem.c
index e57f737bab10..f7ce76983328 100644
--- a/arch/mips/mips-boards/sim/sim_mem.c
+++ b/arch/mips/mips-boards/sim/sim_mem.c
@@ -18,9 +18,11 @@
 #include <linux/init.h>
 #include <linux/mm.h>
 #include <linux/bootmem.h>
+#include <linux/pfn.h>
 
 #include <asm/bootinfo.h>
 #include <asm/page.h>
+#include <asm/sections.h>
 
 #include <asm/mips-boards/prom.h>
 
@@ -39,9 +41,6 @@ static char *mtypes[3] = {
 };
 #endif
 
-/* References to section boundaries */
-extern char _end;
-
 struct prom_pmemblock * __init prom_getmdesc(void)
 {
 	unsigned int memsize;
@@ -61,10 +60,10 @@ struct prom_pmemblock * __init prom_getmdesc(void)
 
 	mdesc[2].type = simmem_reserved;
 	mdesc[2].base = 0x00100000;
-	mdesc[2].size = CPHYSADDR(PAGE_ALIGN(&_end)) - mdesc[2].base;
+	mdesc[2].size = CPHYSADDR(PFN_ALIGN(&_end)) - mdesc[2].base;
 
 	mdesc[3].type = simmem_free;
-	mdesc[3].base = CPHYSADDR(PAGE_ALIGN(&_end));
+	mdesc[3].base = CPHYSADDR(PFN_ALIGN(&_end));
 	mdesc[3].size = memsize - mdesc[3].base;
 
 	return &mdesc[0];
diff --git a/arch/mips/mips-boards/sim/sim_smp.c b/arch/mips/mips-boards/sim/sim_smp.c
index a9f0c2bfe4ad..b7084e7c4bf9 100644
--- a/arch/mips/mips-boards/sim/sim_smp.c
+++ b/arch/mips/mips-boards/sim/sim_smp.c
@@ -44,8 +44,6 @@
 void core_send_ipi(int cpu, unsigned int action)
 {
 #ifdef CONFIG_MIPS_MT_SMTC
-	void smtc_send_ipi(int, int, unsigned int);
-
 	smtc_send_ipi(cpu, LINUX_SMP_IPI, action);
 #endif /* CONFIG_MIPS_MT_SMTC */
 /* "CPU" may be TC of same VPE, VPE of same CPU, or different CPU */
@@ -59,15 +57,8 @@ void core_send_ipi(int cpu, unsigned int action)
 void __init prom_build_cpu_map(void)
 {
 #ifdef CONFIG_MIPS_MT_SMTC
-	extern int mipsmt_build_cpu_map(int startslot);
 	int nextslot;
 
-	cpus_clear(phys_cpu_present_map);
-
-	/* Register the boot CPU */
-
-	smp_prepare_boot_cpu();
-
 	/*
 	 * As of November, 2004, MIPSsim only simulates one core
 	 * at a time.  However, that core may be a MIPS MT core
@@ -87,8 +78,6 @@ void __init prom_build_cpu_map(void)
 void prom_boot_secondary(int cpu, struct task_struct *idle)
 {
 #ifdef CONFIG_MIPS_MT_SMTC
-	extern void smtc_boot_secondary(int cpu, struct task_struct *t);
-
 	smtc_boot_secondary(cpu, idle);
 #endif /* CONFIG_MIPS_MT_SMTC */
 }
@@ -113,7 +102,6 @@ void prom_init_secondary(void)
 void prom_prepare_cpus(unsigned int max_cpus)
 {
 #ifdef CONFIG_MIPS_MT_SMTC
-	void mipsmt_prepare_cpus(int c);
 	/*
 	 * As noted above, we can assume a single CPU for now
 	 * but it may be multithreaded.
@@ -132,8 +120,6 @@ void prom_prepare_cpus(unsigned int max_cpus)
 void prom_smp_finish(void)
 {
 #ifdef CONFIG_MIPS_MT_SMTC
-	void smtc_smp_finish(void);
-
 	smtc_smp_finish();
 #endif /* CONFIG_MIPS_MT_SMTC */
 }
diff --git a/arch/mips/mm/c-r3k.c b/arch/mips/mm/c-r3k.c
index 9dd1352d5748..bb041a22f20a 100644
--- a/arch/mips/mm/c-r3k.c
+++ b/arch/mips/mm/c-r3k.c
@@ -260,6 +260,10 @@ static void r3k_flush_cache_page(struct vm_area_struct *vma, unsigned long page,
 {
 }
 
+static void local_r3k_flush_data_cache_page(unsigned long addr)
+{
+}
+
 static void r3k_flush_data_cache_page(unsigned long addr)
 {
 }
@@ -335,6 +339,7 @@ void __init r3k_cache_init(void)
 	flush_icache_range = r3k_flush_icache_range;
 
 	flush_cache_sigtramp = r3k_flush_cache_sigtramp;
+	local_flush_data_cache_page = local_r3k_flush_data_cache_page;
 	flush_data_cache_page = r3k_flush_data_cache_page;
 
 	_dma_cache_wback_inv = r3k_dma_cache_wback_inv;
diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c
index 32b7f6aeb983..4a43924cd4fc 100644
--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c
@@ -29,6 +29,27 @@
 #include <asm/war.h>
 #include <asm/cacheflush.h> /* for run_uncached() */
 
+
+/*
+ * Special Variant of smp_call_function for use by cache functions:
+ *
+ *  o No return value
+ *  o collapses to normal function call on UP kernels
+ *  o collapses to normal function call on systems with a single shared
+ *    primary cache.
+ */
+static inline void r4k_on_each_cpu(void (*func) (void *info), void *info,
+                                   int retry, int wait)
+{
+	preempt_disable();
+
+#if !defined(CONFIG_MIPS_MT_SMP) && !defined(CONFIG_MIPS_MT_SMTC)
+	smp_call_function(func, info, retry, wait);
+#endif
+	func(info);
+	preempt_enable();
+}
+
 /*
  * Must die.
  */
@@ -154,7 +175,8 @@ static inline void blast_icache32_r4600_v1_page_indexed(unsigned long page)
 
 static inline void tx49_blast_icache32_page_indexed(unsigned long page)
 {
-	unsigned long start = page;
+	unsigned long indexmask = current_cpu_data.icache.waysize - 1;
+	unsigned long start = INDEX_BASE + (page & indexmask);
 	unsigned long end = start + PAGE_SIZE;
 	unsigned long ws_inc = 1UL << current_cpu_data.icache.waybit;
 	unsigned long ws_end = current_cpu_data.icache.ways <<
@@ -298,7 +320,7 @@ static void r4k_flush_cache_all(void)
 	if (!cpu_has_dc_aliases)
 		return;
 
-	on_each_cpu(local_r4k_flush_cache_all, NULL, 1, 1);
+	r4k_on_each_cpu(local_r4k_flush_cache_all, NULL, 1, 1);
 }
 
 static inline void local_r4k___flush_cache_all(void * args)
@@ -313,13 +335,14 @@ static inline void local_r4k___flush_cache_all(void * args)
 	case CPU_R4400MC:
 	case CPU_R10000:
 	case CPU_R12000:
+	case CPU_R14000:
 		r4k_blast_scache();
 	}
 }
 
 static void r4k___flush_cache_all(void)
 {
-	on_each_cpu(local_r4k___flush_cache_all, NULL, 1, 1);
+	r4k_on_each_cpu(local_r4k___flush_cache_all, NULL, 1, 1);
 }
 
 static inline void local_r4k_flush_cache_range(void * args)
@@ -340,7 +363,7 @@ static inline void local_r4k_flush_cache_range(void * args)
 static void r4k_flush_cache_range(struct vm_area_struct *vma,
 	unsigned long start, unsigned long end)
 {
-	on_each_cpu(local_r4k_flush_cache_range, vma, 1, 1);
+	r4k_on_each_cpu(local_r4k_flush_cache_range, vma, 1, 1);
 }
 
 static inline void local_r4k_flush_cache_mm(void * args)
@@ -369,7 +392,7 @@ static void r4k_flush_cache_mm(struct mm_struct *mm)
 	if (!cpu_has_dc_aliases)
 		return;
 
-	on_each_cpu(local_r4k_flush_cache_mm, mm, 1, 1);
+	r4k_on_each_cpu(local_r4k_flush_cache_mm, mm, 1, 1);
 }
 
 struct flush_cache_page_args {
@@ -460,7 +483,7 @@ static void r4k_flush_cache_page(struct vm_area_struct *vma,
 	args.addr = addr;
 	args.pfn = pfn;
 
-	on_each_cpu(local_r4k_flush_cache_page, &args, 1, 1);
+	r4k_on_each_cpu(local_r4k_flush_cache_page, &args, 1, 1);
 }
 
 static inline void local_r4k_flush_data_cache_page(void * addr)
@@ -470,7 +493,7 @@ static inline void local_r4k_flush_data_cache_page(void * addr)
 
 static void r4k_flush_data_cache_page(unsigned long addr)
 {
-	on_each_cpu(local_r4k_flush_data_cache_page, (void *) addr, 1, 1);
+	r4k_on_each_cpu(local_r4k_flush_data_cache_page, (void *) addr, 1, 1);
 }
 
 struct flush_icache_range_args {
@@ -513,7 +536,7 @@ static void r4k_flush_icache_range(unsigned long start, unsigned long end)
 	args.start = start;
 	args.end = end;
 
-	on_each_cpu(local_r4k_flush_icache_range, &args, 1, 1);
+	r4k_on_each_cpu(local_r4k_flush_icache_range, &args, 1, 1);
 	instruction_hazard();
 }
 
@@ -589,7 +612,7 @@ static void r4k_flush_icache_page(struct vm_area_struct *vma,
 	args.vma = vma;
 	args.page = page;
 
-	on_each_cpu(local_r4k_flush_icache_page, &args, 1, 1);
+	r4k_on_each_cpu(local_r4k_flush_icache_page, &args, 1, 1);
 }
 
 
@@ -688,7 +711,7 @@ static void local_r4k_flush_cache_sigtramp(void * arg)
 
 static void r4k_flush_cache_sigtramp(unsigned long addr)
 {
-	on_each_cpu(local_r4k_flush_cache_sigtramp, (void *) addr, 1, 1);
+	r4k_on_each_cpu(local_r4k_flush_cache_sigtramp, (void *) addr, 1, 1);
 }
 
 static void r4k_flush_icache_all(void)
@@ -749,12 +772,12 @@ static void __init probe_pcache(void)
 		icache_size = 1 << (12 + ((config & CONF_IC) >> 9));
 		c->icache.linesz = 16 << ((config & CONF_IB) >> 5);
 		c->icache.ways = 2;
-		c->icache.waybit = ffs(icache_size/2) - 1;
+		c->icache.waybit = __ffs(icache_size/2);
 
 		dcache_size = 1 << (12 + ((config & CONF_DC) >> 6));
 		c->dcache.linesz = 16 << ((config & CONF_DB) >> 4);
 		c->dcache.ways = 2;
-		c->dcache.waybit= ffs(dcache_size/2) - 1;
+		c->dcache.waybit= __ffs(dcache_size/2);
 
 		c->options |= MIPS_CPU_CACHE_CDEX_P;
 		break;
@@ -811,6 +834,7 @@ static void __init probe_pcache(void)
 
 	case CPU_R10000:
 	case CPU_R12000:
+	case CPU_R14000:
 		icache_size = 1 << (12 + ((config & R10K_CONF_IC) >> 29));
 		c->icache.linesz = 64;
 		c->icache.ways = 2;
@@ -837,12 +861,12 @@ static void __init probe_pcache(void)
 		icache_size = 1 << (10 + ((config & CONF_IC) >> 9));
 		c->icache.linesz = 16 << ((config & CONF_IB) >> 5);
 		c->icache.ways = 2;
-		c->icache.waybit = ffs(icache_size/2) - 1;
+		c->icache.waybit = __ffs(icache_size/2);
 
 		dcache_size = 1 << (10 + ((config & CONF_DC) >> 6));
 		c->dcache.linesz = 16 << ((config & CONF_DB) >> 4);
 		c->dcache.ways = 2;
-		c->dcache.waybit = ffs(dcache_size/2) - 1;
+		c->dcache.waybit = __ffs(dcache_size/2);
 
 		c->options |= MIPS_CPU_CACHE_CDEX_P;
 		break;
@@ -873,12 +897,12 @@ static void __init probe_pcache(void)
 		icache_size = 1 << (12 + ((config & CONF_IC) >> 9));
 		c->icache.linesz = 16 << ((config & CONF_IB) >> 5);
 		c->icache.ways = 4;
-		c->icache.waybit = ffs(icache_size / c->icache.ways) - 1;
+		c->icache.waybit = __ffs(icache_size / c->icache.ways);
 
 		dcache_size = 1 << (12 + ((config & CONF_DC) >> 6));
 		c->dcache.linesz = 16 << ((config & CONF_DB) >> 4);
 		c->dcache.ways = 4;
-		c->dcache.waybit = ffs(dcache_size / c->dcache.ways) - 1;
+		c->dcache.waybit = __ffs(dcache_size / c->dcache.ways);
 
 #if !defined(CONFIG_SMP) || !defined(RM9000_CDEX_SMP_WAR)
 		c->options |= MIPS_CPU_CACHE_CDEX_P;
@@ -906,7 +930,7 @@ static void __init probe_pcache(void)
 		icache_size = c->icache.sets *
 		              c->icache.ways *
 		              c->icache.linesz;
-		c->icache.waybit = ffs(icache_size/c->icache.ways) - 1;
+		c->icache.waybit = __ffs(icache_size/c->icache.ways);
 
 		if (config & 0x8)		/* VI bit */
 			c->icache.flags |= MIPS_CACHE_VTAG;
@@ -926,7 +950,7 @@ static void __init probe_pcache(void)
 		dcache_size = c->dcache.sets *
 		              c->dcache.ways *
 		              c->dcache.linesz;
-		c->dcache.waybit = ffs(dcache_size/c->dcache.ways) - 1;
+		c->dcache.waybit = __ffs(dcache_size/c->dcache.ways);
 
 		c->options |= MIPS_CPU_PREFETCH;
 		break;
@@ -964,9 +988,11 @@ static void __init probe_pcache(void)
 		c->dcache.flags |= MIPS_CACHE_PINDEX;
 	case CPU_R10000:
 	case CPU_R12000:
+	case CPU_R14000:
 	case CPU_SB1:
 		break;
 	case CPU_24K:
+	case CPU_34K:
 		if (!(read_c0_config7() & (1 << 16)))
 	default:
 			if (c->dcache.waysize > PAGE_SIZE)
@@ -1090,6 +1116,7 @@ static void __init setup_scache(void)
 
 	case CPU_R10000:
 	case CPU_R12000:
+	case CPU_R14000:
 		scache_size = 0x80000 << ((config & R10K_CONF_SS) >> 16);
 		c->scache.linesz = 64 << ((config >> 13) & 1);
 		c->scache.ways = 2;
@@ -1134,6 +1161,31 @@ static void __init setup_scache(void)
 	c->options |= MIPS_CPU_SUBSET_CACHES;
 }
 
+void au1x00_fixup_config_od(void)
+{
+	/*
+	 * c0_config.od (bit 19) was write only (and read as 0)
+	 * on the early revisions of Alchemy SOCs.  It disables the bus
+	 * transaction overlapping and needs to be set to fix various errata.
+	 */
+	switch (read_c0_prid()) {
+	case 0x00030100: /* Au1000 DA */
+	case 0x00030201: /* Au1000 HA */
+	case 0x00030202: /* Au1000 HB */
+	case 0x01030200: /* Au1500 AB */
+	/*
+	 * Au1100 errata actually keeps silence about this bit, so we set it
+	 * just in case for those revisions that require it to be set according
+	 * to arch/mips/au1000/common/cputable.c
+	 */
+	case 0x02030200: /* Au1100 AB */
+	case 0x02030201: /* Au1100 BA */
+	case 0x02030202: /* Au1100 BC */
+		set_c0_config(1 << 19);
+		break;
+	}
+}
+
 static inline void coherency_setup(void)
 {
 	change_c0_config(CONF_CM_CMASK, CONF_CM_DEFAULT);
@@ -1154,6 +1206,15 @@ static inline void coherency_setup(void)
 	case CPU_R4400MC:
 		clear_c0_config(CONF_CU);
 		break;
+	/*
+	 * We need to catch the ealry Alchemy SOCs with
+	 * the write-only co_config.od bit and set it back to one...
+	 */
+	case CPU_AU1000: /* rev. DA, HA, HB */
+	case CPU_AU1100: /* rev. AB, BA, BC ?? */
+	case CPU_AU1500: /* rev. AB */
+		au1x00_fixup_config_od();
+		break;
 	}
 }
 
@@ -1198,6 +1259,7 @@ void __init r4k_cache_init(void)
 
 	flush_cache_sigtramp	= r4k_flush_cache_sigtramp;
 	flush_icache_all	= r4k_flush_icache_all;
+	local_flush_data_cache_page	= local_r4k_flush_data_cache_page;
 	flush_data_cache_page	= r4k_flush_data_cache_page;
 	flush_icache_range	= r4k_flush_icache_range;
 
diff --git a/arch/mips/mm/c-sb1.c b/arch/mips/mm/c-sb1.c
index 2f08b535f20e..f9b129491b1e 100644
--- a/arch/mips/mm/c-sb1.c
+++ b/arch/mips/mm/c-sb1.c
@@ -528,6 +528,7 @@ void sb1_cache_init(void)
 	flush_cache_page = sb1_flush_cache_page;
 
 	flush_cache_sigtramp = sb1_flush_cache_sigtramp;
+	local_flush_data_cache_page = (void *) sb1_nop;
 	flush_data_cache_page = (void *) sb1_nop;
 
 	/* Full flush */
diff --git a/arch/mips/mm/c-tx39.c b/arch/mips/mm/c-tx39.c
index fe232e3988e3..5dfc9b1901f6 100644
--- a/arch/mips/mm/c-tx39.c
+++ b/arch/mips/mm/c-tx39.c
@@ -216,6 +216,11 @@ static void tx39_flush_cache_page(struct vm_area_struct *vma, unsigned long page
 		tx39_blast_icache_page_indexed(page);
 }
 
+static void local_tx39_flush_data_cache_page(void * addr)
+{
+	tx39_blast_dcache_page(addr);
+}
+
 static void tx39_flush_data_cache_page(unsigned long addr)
 {
 	tx39_blast_dcache_page(addr);
@@ -381,6 +386,7 @@ void __init tx39_cache_init(void)
 		flush_icache_range	= (void *) tx39h_flush_icache_all;
 
 		flush_cache_sigtramp	= (void *) tx39h_flush_icache_all;
+		local_flush_data_cache_page	= (void *) tx39h_flush_icache_all;
 		flush_data_cache_page	= (void *) tx39h_flush_icache_all;
 
 		_dma_cache_wback_inv	= tx39h_dma_cache_wback_inv;
@@ -406,6 +412,7 @@ void __init tx39_cache_init(void)
 		flush_icache_range = tx39_flush_icache_range;
 
 		flush_cache_sigtramp = tx39_flush_cache_sigtramp;
+		local_flush_data_cache_page = local_tx39_flush_data_cache_page;
 		flush_data_cache_page = tx39_flush_data_cache_page;
 
 		_dma_cache_wback_inv = tx39_dma_cache_wback_inv;
diff --git a/arch/mips/mm/cache.c b/arch/mips/mm/cache.c
index 591c22b080e4..83a56296be86 100644
--- a/arch/mips/mm/cache.c
+++ b/arch/mips/mm/cache.c
@@ -30,6 +30,7 @@ void (*flush_icache_page)(struct vm_area_struct *vma, struct page *page);
 
 /* MIPS specific cache operations */
 void (*flush_cache_sigtramp)(unsigned long addr);
+void (*local_flush_data_cache_page)(void * addr);
 void (*flush_data_cache_page)(unsigned long addr);
 void (*flush_icache_all)(void);
 
diff --git a/arch/mips/mm/fault.c b/arch/mips/mm/fault.c
index 2d9624fd10ec..e3a617224868 100644
--- a/arch/mips/mm/fault.c
+++ b/arch/mips/mm/fault.c
@@ -157,7 +157,6 @@ no_context:
 	 * Oops. The kernel tried to access some bad page. We'll have to
 	 * terminate things with extreme prejudice.
 	 */
-
 	bust_spinlocks(1);
 
 	printk(KERN_ALERT "CPU %d Unable to handle kernel paging request at "
@@ -188,11 +187,20 @@ do_sigbus:
 	/* Kernel mode? Handle exceptions or die */
 	if (!user_mode(regs))
 		goto no_context;
-
+	else
 	/*
 	 * Send a sigbus, regardless of whether we were in kernel
 	 * or user mode.
 	 */
+#if 0
+		printk("do_page_fault() #3: sending SIGBUS to %s for "
+		       "invalid %s\n%0*lx (epc == %0*lx, ra == %0*lx)\n",
+		       tsk->comm,
+		       write ? "write access to" : "read access from",
+		       field, address,
+		       field, (unsigned long) regs->cp0_epc,
+		       field, (unsigned long) regs->regs[31]);
+#endif
 	tsk->thread.cp0_badvaddr = address;
 	info.si_signo = SIGBUS;
 	info.si_errno = 0;
@@ -201,7 +209,6 @@ do_sigbus:
 	force_sig_info(SIGBUS, &info, tsk);
 
 	return;
-
 vmalloc_fault:
 	{
 		/*
diff --git a/arch/mips/mm/highmem.c b/arch/mips/mm/highmem.c
index 1f7b37b38f5c..0c544375b856 100644
--- a/arch/mips/mm/highmem.c
+++ b/arch/mips/mm/highmem.c
@@ -83,6 +83,7 @@ void __kunmap_atomic(void *kvaddr, enum km_type type)
 	preempt_check_resched();
 }
 
+#ifndef CONFIG_LIMITED_DMA
 /*
  * This is the same as kmap_atomic() but can map memory that doesn't
  * have a struct page associated with it.
@@ -101,6 +102,7 @@ void *kmap_atomic_pfn(unsigned long pfn, enum km_type type)
 
 	return (void*) vaddr;
 }
+#endif /* CONFIG_LIMITED_DMA */
 
 struct page *__kmap_atomic_to_page(void *ptr)
 {
diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c
index ad89c442f299..33f6e1cdfd5b 100644
--- a/arch/mips/mm/init.c
+++ b/arch/mips/mm/init.c
@@ -227,7 +227,7 @@ void __init mem_init(void)
 	for (tmp = 0; tmp < max_low_pfn; tmp++)
 		if (page_is_ram(tmp)) {
 			ram++;
-			if (PageReserved(mem_map+tmp))
+			if (PageReserved(pfn_to_page(tmp)))
 				reservedpages++;
 		}
 
@@ -276,6 +276,20 @@ void __init mem_init(void)
 }
 #endif /* !CONFIG_NEED_MULTIPLE_NODES */
 
+void free_init_pages(char *what, unsigned long begin, unsigned long end)
+{
+	unsigned long addr;
+
+	for (addr = begin; addr < end; addr += PAGE_SIZE) {
+		ClearPageReserved(virt_to_page(addr));
+		init_page_count(virt_to_page(addr));
+		memset((void *)addr, 0xcc, PAGE_SIZE);
+		free_page(addr);
+		totalram_pages++;
+	}
+	printk(KERN_INFO "Freeing %s: %ldk freed\n", what, (end - begin) >> 10);
+}
+
 #ifdef CONFIG_BLK_DEV_INITRD
 void free_initrd_mem(unsigned long start, unsigned long end)
 {
@@ -284,16 +298,7 @@ void free_initrd_mem(unsigned long start, unsigned long end)
 	start = (unsigned long)phys_to_virt(CPHYSADDR(start));
 	end = (unsigned long)phys_to_virt(CPHYSADDR(end));
 #endif
-	if (start < end)
-		printk(KERN_INFO "Freeing initrd memory: %ldk freed\n",
-		       (end - start) >> 10);
-
-	for (; start < end; start += PAGE_SIZE) {
-		ClearPageReserved(virt_to_page(start));
-		init_page_count(virt_to_page(start));
-		free_page(start);
-		totalram_pages++;
-	}
+	free_init_pages("initrd memory", start, end);
 }
 #endif
 
@@ -301,24 +306,17 @@ extern unsigned long prom_free_prom_memory(void);
 
 void free_initmem(void)
 {
-	unsigned long addr, page, freed;
+	unsigned long start, end, freed;
 
 	freed = prom_free_prom_memory();
+	if (freed)
+		printk(KERN_INFO "Freeing firmware memory: %ldk freed\n",freed);
 
-	addr = (unsigned long) &__init_begin;
-	while (addr < (unsigned long) &__init_end) {
+	start = (unsigned long)(&__init_begin);
+	end = (unsigned long)(&__init_end);
 #ifdef CONFIG_64BIT
-		page = PAGE_OFFSET | CPHYSADDR(addr);
-#else
-		page = addr;
+	start = PAGE_OFFSET | CPHYSADDR(start);
+	end = PAGE_OFFSET | CPHYSADDR(end);
 #endif
-		ClearPageReserved(virt_to_page(page));
-		init_page_count(virt_to_page(page));
-		free_page(page);
-		totalram_pages++;
-		freed += PAGE_SIZE;
-		addr += PAGE_SIZE;
-	}
-	printk(KERN_INFO "Freeing unused kernel memory: %ldk freed\n",
-	       freed >> 10);
+	free_init_pages("unused kernel memory", start, end);
 }
diff --git a/arch/mips/mm/pg-r4k.c b/arch/mips/mm/pg-r4k.c
index e4390dc3eb48..b7c749232ffe 100644
--- a/arch/mips/mm/pg-r4k.c
+++ b/arch/mips/mm/pg-r4k.c
@@ -357,6 +357,7 @@ void __init build_clear_page(void)
 
 		case CPU_R10000:
 		case CPU_R12000:
+		case CPU_R14000:
 			pref_src_mode = Pref_LoadStreamed;
 			pref_dst_mode = Pref_StoreStreamed;
 			break;
diff --git a/arch/mips/mm/sc-rm7k.c b/arch/mips/mm/sc-rm7k.c
index 3b6cc9ba1b05..31ec73052423 100644
--- a/arch/mips/mm/sc-rm7k.c
+++ b/arch/mips/mm/sc-rm7k.c
@@ -138,7 +138,7 @@ void __init rm7k_sc_init(void)
 
 	c->scache.linesz = sc_lsize;
 	c->scache.ways = 4;
-	c->scache.waybit= ffs(scache_size / c->scache.ways) - 1;
+	c->scache.waybit= __ffs(scache_size / c->scache.ways);
 	c->scache.waysize = scache_size / c->scache.ways;
 	c->scache.sets = scache_size / (c->scache.linesz * c->scache.ways);
 	printk(KERN_INFO "Secondary cache size %dK, linesize %d bytes.\n",
diff --git a/arch/mips/mm/tlb-r4k.c b/arch/mips/mm/tlb-r4k.c
index a865f2394cb0..9dca099ba16b 100644
--- a/arch/mips/mm/tlb-r4k.c
+++ b/arch/mips/mm/tlb-r4k.c
@@ -32,13 +32,35 @@ extern void build_tlb_refill_handler(void);
 				     "nop; nop; nop; nop; nop; nop;\n\t" \
 				     ".set reorder\n\t")
 
+/* Atomicity and interruptability */
+#ifdef CONFIG_MIPS_MT_SMTC
+
+#include <asm/smtc.h>
+#include <asm/mipsmtregs.h>
+
+#define ENTER_CRITICAL(flags) \
+	{ \
+	unsigned int mvpflags; \
+	local_irq_save(flags);\
+	mvpflags = dvpe()
+#define EXIT_CRITICAL(flags) \
+	evpe(mvpflags); \
+	local_irq_restore(flags); \
+	}
+#else
+
+#define ENTER_CRITICAL(flags) local_irq_save(flags)
+#define EXIT_CRITICAL(flags) local_irq_restore(flags)
+
+#endif /* CONFIG_MIPS_MT_SMTC */
+
 void local_flush_tlb_all(void)
 {
 	unsigned long flags;
 	unsigned long old_ctx;
 	int entry;
 
-	local_irq_save(flags);
+	ENTER_CRITICAL(flags);
 	/* Save old context and create impossible VPN2 value */
 	old_ctx = read_c0_entryhi();
 	write_c0_entrylo0(0);
@@ -57,7 +79,7 @@ void local_flush_tlb_all(void)
 	}
 	tlbw_use_hazard();
 	write_c0_entryhi(old_ctx);
-	local_irq_restore(flags);
+	EXIT_CRITICAL(flags);
 }
 
 /* All entries common to a mm share an asid.  To effectively flush
@@ -87,6 +109,7 @@ void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
 		unsigned long flags;
 		int size;
 
+		ENTER_CRITICAL(flags);
 		size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT;
 		size = (size + 1) >> 1;
 		local_irq_save(flags);
@@ -120,7 +143,7 @@ void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
 		} else {
 			drop_mmu_context(mm, cpu);
 		}
-		local_irq_restore(flags);
+		EXIT_CRITICAL(flags);
 	}
 }
 
@@ -129,9 +152,9 @@ void local_flush_tlb_kernel_range(unsigned long start, unsigned long end)
 	unsigned long flags;
 	int size;
 
+	ENTER_CRITICAL(flags);
 	size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT;
 	size = (size + 1) >> 1;
-	local_irq_save(flags);
 	if (size <= current_cpu_data.tlbsize / 2) {
 		int pid = read_c0_entryhi();
 
@@ -162,7 +185,7 @@ void local_flush_tlb_kernel_range(unsigned long start, unsigned long end)
 	} else {
 		local_flush_tlb_all();
 	}
-	local_irq_restore(flags);
+	EXIT_CRITICAL(flags);
 }
 
 void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long page)
@@ -175,7 +198,7 @@ void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long page)
 
 		newpid = cpu_asid(cpu, vma->vm_mm);
 		page &= (PAGE_MASK << 1);
-		local_irq_save(flags);
+		ENTER_CRITICAL(flags);
 		oldpid = read_c0_entryhi();
 		write_c0_entryhi(page | newpid);
 		mtc0_tlbw_hazard();
@@ -194,7 +217,7 @@ void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long page)
 
 	finish:
 		write_c0_entryhi(oldpid);
-		local_irq_restore(flags);
+		EXIT_CRITICAL(flags);
 	}
 }
 
@@ -207,7 +230,7 @@ void local_flush_tlb_one(unsigned long page)
 	unsigned long flags;
 	int oldpid, idx;
 
-	local_irq_save(flags);
+	ENTER_CRITICAL(flags);
 	oldpid = read_c0_entryhi();
 	page &= (PAGE_MASK << 1);
 	write_c0_entryhi(page);
@@ -226,7 +249,7 @@ void local_flush_tlb_one(unsigned long page)
 	}
 	write_c0_entryhi(oldpid);
 
-	local_irq_restore(flags);
+	EXIT_CRITICAL(flags);
 }
 
 /*
@@ -249,7 +272,7 @@ void __update_tlb(struct vm_area_struct * vma, unsigned long address, pte_t pte)
 	if (current->active_mm != vma->vm_mm)
 		return;
 
-	local_irq_save(flags);
+	ENTER_CRITICAL(flags);
 
 	pid = read_c0_entryhi() & ASID_MASK;
 	address &= (PAGE_MASK << 1);
@@ -277,7 +300,7 @@ void __update_tlb(struct vm_area_struct * vma, unsigned long address, pte_t pte)
 	else
 		tlb_write_indexed();
 	tlbw_use_hazard();
-	local_irq_restore(flags);
+	EXIT_CRITICAL(flags);
 }
 
 #if 0
@@ -291,7 +314,7 @@ static void r4k_update_mmu_cache_hwbug(struct vm_area_struct * vma,
 	pte_t *ptep;
 	int idx;
 
-	local_irq_save(flags);
+	ENTER_CRITICAL(flags);
 	address &= (PAGE_MASK << 1);
 	asid = read_c0_entryhi() & ASID_MASK;
 	write_c0_entryhi(address | asid);
@@ -310,7 +333,7 @@ static void r4k_update_mmu_cache_hwbug(struct vm_area_struct * vma,
 	else
 		tlb_write_indexed();
 	tlbw_use_hazard();
-	local_irq_restore(flags);
+	EXIT_CRITICAL(flags);
 }
 #endif
 
@@ -322,7 +345,7 @@ void __init add_wired_entry(unsigned long entrylo0, unsigned long entrylo1,
 	unsigned long old_pagemask;
 	unsigned long old_ctx;
 
-	local_irq_save(flags);
+	ENTER_CRITICAL(flags);
 	/* Save old context and create impossible VPN2 value */
 	old_ctx = read_c0_entryhi();
 	old_pagemask = read_c0_pagemask();
@@ -342,7 +365,7 @@ void __init add_wired_entry(unsigned long entrylo0, unsigned long entrylo1,
 	BARRIER;
 	write_c0_pagemask(old_pagemask);
 	local_flush_tlb_all();
-	local_irq_restore(flags);
+	EXIT_CRITICAL(flags);
 }
 
 /*
@@ -362,7 +385,7 @@ __init int add_temporary_entry(unsigned long entrylo0, unsigned long entrylo1,
 	unsigned long old_pagemask;
 	unsigned long old_ctx;
 
-	local_irq_save(flags);
+	ENTER_CRITICAL(flags);
 	/* Save old context and create impossible VPN2 value */
 	old_ctx = read_c0_entryhi();
 	old_pagemask = read_c0_pagemask();
@@ -386,10 +409,11 @@ __init int add_temporary_entry(unsigned long entrylo0, unsigned long entrylo1,
 	write_c0_entryhi(old_ctx);
 	write_c0_pagemask(old_pagemask);
 out:
-	local_irq_restore(flags);
+	EXIT_CRITICAL(flags);
 	return ret;
 }
 
+extern void __init sanitize_tlb_entries(void);
 static void __init probe_tlb(unsigned long config)
 {
 	struct cpuinfo_mips *c = &current_cpu_data;
@@ -402,6 +426,14 @@ static void __init probe_tlb(unsigned long config)
 	 */
 	if ((c->processor_id & 0xff0000) == PRID_COMP_LEGACY)
 		return;
+#ifdef CONFIG_MIPS_MT_SMTC
+	/*
+	 * If TLB is shared in SMTC system, total size already
+	 * has been calculated and written into cpu_data tlbsize
+	 */
+	if((smtc_status & SMTC_TLB_SHARED) == SMTC_TLB_SHARED)
+		return;
+#endif /* CONFIG_MIPS_MT_SMTC */
 
 	reg = read_c0_config1();
 	if (!((config >> 7) & 3))
@@ -410,6 +442,15 @@ static void __init probe_tlb(unsigned long config)
 	c->tlbsize = ((reg >> 25) & 0x3f) + 1;
 }
 
+static int __initdata ntlb = 0;
+static int __init set_ntlb(char *str)
+{
+	get_option(&str, &ntlb);
+	return 1;
+}
+
+__setup("ntlb=", set_ntlb);
+
 void __init tlb_init(void)
 {
 	unsigned int config = read_c0_config();
@@ -432,5 +473,15 @@ void __init tlb_init(void)
 
 	/* Did I tell you that ARC SUCKS?  */
 
+	if (ntlb) {
+		if (ntlb > 1 && ntlb <= current_cpu_data.tlbsize) {
+			int wired = current_cpu_data.tlbsize - ntlb;
+			write_c0_wired(wired);
+			write_c0_index(wired-1);
+			printk ("Restricting TLB to %d entries\n", ntlb);
+		} else
+			printk("Ignoring invalid argument ntlb=%d\n", ntlb);
+	}
+
 	build_tlb_refill_handler();
 }
diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c
index 599b3c297186..54507be2ab5b 100644
--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -7,6 +7,16 @@
  *
  * Copyright (C) 2004,2005 by Thiemo Seufer
  * Copyright (C) 2005  Maciej W. Rozycki
+ * Copyright (C) 2006  Ralf Baechle (ralf@linux-mips.org)
+ *
+ * ... and the days got worse and worse and now you see
+ * I've gone completly out of my mind.
+ *
+ * They're coming to take me a away haha
+ * they're coming to take me a away hoho hihi haha
+ * to the funny farm where code is beautiful all the time ...
+ *
+ * (Condolences to Napoleon XIV)
  */
 
 #include <stdarg.h>
@@ -68,6 +78,7 @@ enum fields
 	BIMM = 0x040,
 	JIMM = 0x080,
 	FUNC = 0x100,
+	SET = 0x200
 };
 
 #define OP_MASK		0x2f
@@ -86,6 +97,8 @@ enum fields
 #define JIMM_SH		0
 #define FUNC_MASK	0x2f
 #define FUNC_SH		0
+#define SET_MASK	0x7
+#define SET_SH		0
 
 enum opcode {
 	insn_invalid,
@@ -129,8 +142,8 @@ static __initdata struct insn insn_table[] = {
 	{ insn_bne, M(bne_op,0,0,0,0,0), RS | RT | BIMM },
 	{ insn_daddiu, M(daddiu_op,0,0,0,0,0), RS | RT | SIMM },
 	{ insn_daddu, M(spec_op,0,0,0,0,daddu_op), RS | RT | RD },
-	{ insn_dmfc0, M(cop0_op,dmfc_op,0,0,0,0), RT | RD },
-	{ insn_dmtc0, M(cop0_op,dmtc_op,0,0,0,0), RT | RD },
+	{ insn_dmfc0, M(cop0_op,dmfc_op,0,0,0,0), RT | RD | SET},
+	{ insn_dmtc0, M(cop0_op,dmtc_op,0,0,0,0), RT | RD | SET},
 	{ insn_dsll, M(spec_op,0,0,0,0,dsll_op), RT | RD | RE },
 	{ insn_dsll32, M(spec_op,0,0,0,0,dsll32_op), RT | RD | RE },
 	{ insn_dsra, M(spec_op,0,0,0,0,dsra_op), RT | RD | RE },
@@ -145,8 +158,8 @@ static __initdata struct insn insn_table[] = {
 	{ insn_lld, M(lld_op,0,0,0,0,0), RS | RT | SIMM },
 	{ insn_lui, M(lui_op,0,0,0,0,0), RT | SIMM },
 	{ insn_lw, M(lw_op,0,0,0,0,0), RS | RT | SIMM },
-	{ insn_mfc0, M(cop0_op,mfc_op,0,0,0,0), RT | RD },
-	{ insn_mtc0, M(cop0_op,mtc_op,0,0,0,0), RT | RD },
+	{ insn_mfc0, M(cop0_op,mfc_op,0,0,0,0), RT | RD | SET},
+	{ insn_mtc0, M(cop0_op,mtc_op,0,0,0,0), RT | RD | SET},
 	{ insn_ori, M(ori_op,0,0,0,0,0), RS | RT | UIMM },
 	{ insn_rfe, M(cop0_op,cop_op,0,0,0,rfe_op), 0 },
 	{ insn_sc, M(sc_op,0,0,0,0,0), RS | RT | SIMM },
@@ -242,6 +255,14 @@ static __init u32 build_func(u32 arg)
 	return arg & FUNC_MASK;
 }
 
+static __init u32 build_set(u32 arg)
+{
+	if (arg & ~SET_MASK)
+		printk(KERN_WARNING "TLB synthesizer field overflow\n");
+
+	return arg & SET_MASK;
+}
+
 /*
  * The order of opcode arguments is implicitly left to right,
  * starting with RS and ending with FUNC or IMM.
@@ -273,6 +294,7 @@ static void __init build_insn(u32 **buf, enum opcode opc, ...)
 	if (ip->fields & BIMM) op |= build_bimm(va_arg(ap, s32));
 	if (ip->fields & JIMM) op |= build_jimm(va_arg(ap, u32));
 	if (ip->fields & FUNC) op |= build_func(va_arg(ap, u32));
+	if (ip->fields & SET) op |= build_set(va_arg(ap, u32));
 	va_end(ap);
 
 	**buf = op;
@@ -358,8 +380,8 @@ I_u1s2(_bgezl);
 I_u1s2(_bltz);
 I_u1s2(_bltzl);
 I_u1u2s3(_bne);
-I_u1u2(_dmfc0);
-I_u1u2(_dmtc0);
+I_u1u2u3(_dmfc0);
+I_u1u2u3(_dmtc0);
 I_u2u1s3(_daddiu);
 I_u3u1u2(_daddu);
 I_u2u1u3(_dsll);
@@ -376,8 +398,8 @@ I_u2s3u1(_ll);
 I_u2s3u1(_lld);
 I_u1s2(_lui);
 I_u2s3u1(_lw);
-I_u1u2(_mfc0);
-I_u1u2(_mtc0);
+I_u1u2u3(_mfc0);
+I_u1u2u3(_mtc0);
 I_u2u1u3(_ori);
 I_0(_rfe);
 I_u2s3u1(_sc);
@@ -451,8 +473,8 @@ L_LA(_r3000_write_probe_fail)
 # define i_SLL(buf, rs, rt, sh) i_dsll(buf, rs, rt, sh)
 # define i_SRA(buf, rs, rt, sh) i_dsra(buf, rs, rt, sh)
 # define i_SRL(buf, rs, rt, sh) i_dsrl(buf, rs, rt, sh)
-# define i_MFC0(buf, rt, rd) i_dmfc0(buf, rt, rd)
-# define i_MTC0(buf, rt, rd) i_dmtc0(buf, rt, rd)
+# define i_MFC0(buf, rt, rd...) i_dmfc0(buf, rt, rd)
+# define i_MTC0(buf, rt, rd...) i_dmtc0(buf, rt, rd)
 # define i_ADDIU(buf, rs, rt, val) i_daddiu(buf, rs, rt, val)
 # define i_ADDU(buf, rs, rt, rd) i_daddu(buf, rs, rt, rd)
 # define i_SUBU(buf, rs, rt, rd) i_dsubu(buf, rs, rt, rd)
@@ -464,8 +486,8 @@ L_LA(_r3000_write_probe_fail)
 # define i_SLL(buf, rs, rt, sh) i_sll(buf, rs, rt, sh)
 # define i_SRA(buf, rs, rt, sh) i_sra(buf, rs, rt, sh)
 # define i_SRL(buf, rs, rt, sh) i_srl(buf, rs, rt, sh)
-# define i_MFC0(buf, rt, rd) i_mfc0(buf, rt, rd)
-# define i_MTC0(buf, rt, rd) i_mtc0(buf, rt, rd)
+# define i_MFC0(buf, rt, rd...) i_mfc0(buf, rt, rd)
+# define i_MTC0(buf, rt, rd...) i_mtc0(buf, rt, rd)
 # define i_ADDIU(buf, rs, rt, val) i_addiu(buf, rs, rt, val)
 # define i_ADDU(buf, rs, rt, rd) i_addu(buf, rs, rt, rd)
 # define i_SUBU(buf, rs, rt, rd) i_subu(buf, rs, rt, rd)
@@ -670,14 +692,15 @@ static void __init il_bgezl(u32 **p, struct reloc **r, unsigned int reg,
 #define K1		27
 
 /* Some CP0 registers */
-#define C0_INDEX	0
-#define C0_ENTRYLO0	2
-#define C0_ENTRYLO1	3
-#define C0_CONTEXT	4
-#define C0_BADVADDR	8
-#define C0_ENTRYHI	10
-#define C0_EPC		14
-#define C0_XCONTEXT	20
+#define C0_INDEX	0, 0
+#define C0_ENTRYLO0	2, 0
+#define C0_TCBIND	2, 2
+#define C0_ENTRYLO1	3, 0
+#define C0_CONTEXT	4, 0
+#define C0_BADVADDR	8, 0
+#define C0_ENTRYHI	10, 0
+#define C0_EPC		14, 0
+#define C0_XCONTEXT	20, 0
 
 #ifdef CONFIG_64BIT
 # define GET_CONTEXT(buf, reg) i_MFC0(buf, reg, C0_XCONTEXT)
@@ -742,7 +765,7 @@ static void __init build_r3000_tlb_refill_handler(void)
 	}
 #endif
 
-	memcpy((void *)CAC_BASE, tlb_handler, 0x80);
+	memcpy((void *)ebase, tlb_handler, 0x80);
 }
 
 /*
@@ -852,6 +875,7 @@ static __init void build_tlb_write_entry(u32 **p, struct label **l,
 
 	case CPU_R10000:
 	case CPU_R12000:
+	case CPU_R14000:
 	case CPU_4KC:
 	case CPU_SB1:
 	case CPU_SB1A:
@@ -883,6 +907,7 @@ static __init void build_tlb_write_entry(u32 **p, struct label **l,
 	case CPU_4KEC:
 	case CPU_24K:
 	case CPU_34K:
+	case CPU_74K:
 		i_ehb(p);
 		tlbw(p);
 		break;
@@ -951,12 +976,20 @@ build_get_pmde64(u32 **p, struct label **l, struct reloc **r,
 	/* No i_nop needed here, since the next insn doesn't touch TMP. */
 
 #ifdef CONFIG_SMP
+# ifdef  CONFIG_MIPS_MT_SMTC
+	/*
+	 * SMTC uses TCBind value as "CPU" index
+	 */
+	i_mfc0(p, ptr, C0_TCBIND);
+	i_dsrl(p, ptr, ptr, 19);
+# else
 	/*
 	 * 64 bit SMP running in XKPHYS has smp_processor_id() << 3
 	 * stored in CONTEXT.
 	 */
 	i_dmfc0(p, ptr, C0_CONTEXT);
 	i_dsrl(p, ptr, ptr, 23);
+#endif
 	i_LA_mostly(p, tmp, pgdc);
 	i_daddu(p, ptr, ptr, tmp);
 	i_dmfc0(p, tmp, C0_BADVADDR);
@@ -1014,9 +1047,21 @@ build_get_pgde32(u32 **p, unsigned int tmp, unsigned int ptr)
 
 	/* 32 bit SMP has smp_processor_id() stored in CONTEXT. */
 #ifdef CONFIG_SMP
+#ifdef  CONFIG_MIPS_MT_SMTC
+	/*
+	 * SMTC uses TCBind value as "CPU" index
+	 */
+	i_mfc0(p, ptr, C0_TCBIND);
+	i_LA_mostly(p, tmp, pgdc);
+	i_srl(p, ptr, ptr, 19);
+#else
+	/*
+	 * smp_processor_id() << 3 is stored in CONTEXT.
+         */
 	i_mfc0(p, ptr, C0_CONTEXT);
 	i_LA_mostly(p, tmp, pgdc);
 	i_srl(p, ptr, ptr, 23);
+#endif
 	i_addu(p, ptr, tmp, ptr);
 #else
 	i_LA_mostly(p, ptr, pgdc);
@@ -1247,7 +1292,7 @@ static void __init build_r4000_tlb_refill_handler(void)
 	}
 #endif
 
-	memcpy((void *)CAC_BASE, final_handler, 0x100);
+	memcpy((void *)ebase, final_handler, 0x100);
 }
 
 /*
diff --git a/arch/mips/momentum/jaguar_atx/Makefile b/arch/mips/momentum/jaguar_atx/Makefile
index 20bbd3ea44a8..67372f3f9654 100644
--- a/arch/mips/momentum/jaguar_atx/Makefile
+++ b/arch/mips/momentum/jaguar_atx/Makefile
@@ -6,7 +6,7 @@
 # unless it's something special (ie not a .c file).
 #
 
-obj-y += int-handler.o irq.o prom.o reset.o setup.o
+obj-y += irq.o prom.o reset.o setup.o
 
 obj-$(CONFIG_SERIAL_8250_CONSOLE) += ja-console.o
 obj-$(CONFIG_REMOTE_DEBUG) += dbg_io.o
diff --git a/arch/mips/momentum/jaguar_atx/dbg_io.c b/arch/mips/momentum/jaguar_atx/dbg_io.c
index 542eac82b63c..d7dea0a136aa 100644
--- a/arch/mips/momentum/jaguar_atx/dbg_io.c
+++ b/arch/mips/momentum/jaguar_atx/dbg_io.c
@@ -73,7 +73,7 @@ void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop)
 	/* disable interrupts */
 	UART16550_WRITE(OFS_INTR_ENABLE, 0);
 
-	/* set up buad rate */
+	/* set up baud rate */
 	{
 		uint32 divisor;
 
diff --git a/arch/mips/momentum/jaguar_atx/int-handler.S b/arch/mips/momentum/jaguar_atx/int-handler.S
deleted file mode 100644
index 55bc789733f2..000000000000
--- a/arch/mips/momentum/jaguar_atx/int-handler.S
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
- * Copyright 2002 Momentum Computer Inc.
- * Author: Matthew Dharm <mdharm@momenco.com>
- *
- * Based on work:
- *   Copyright 2001 MontaVista Software Inc.
- *   Author: jsun@mvista.com or jsun@junsun.net
- *
- * First-level interrupt dispatcher for Jaguar-ATX board.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#include <asm/asm.h>
-#include <asm/mipsregs.h>
-#include <asm/addrspace.h>
-#include <asm/regdef.h>
-#include <asm/stackframe.h>
-
-/*
- * First level interrupt dispatcher for Ocelot-CS board
- */
-		.align	5
-		NESTED(jaguar_handle_int, PT_SIZE, sp)
-		SAVE_ALL
-		CLI
-		.set	at
-		mfc0	t0, CP0_CAUSE
-		mfc0	t2, CP0_STATUS
-
-		and	t0, t2
-
-		andi	t1, t0, STATUSF_IP0	/* sw0 software interrupt */
-		bnez	t1, ll_sw0_irq
-		andi	t1, t0, STATUSF_IP1	/* sw1 software interrupt */
-		bnez	t1, ll_sw1_irq
-		andi	t1, t0, STATUSF_IP2	/* int0 hardware line */
-		bnez	t1, ll_pcixa_irq
-		andi	t1, t0, STATUSF_IP3	/* int1 hardware line */
-		bnez	t1, ll_pcixb_irq
-		andi	t1, t0, STATUSF_IP4	/* int2 hardware line */
-		bnez	t1, ll_pcia_irq
-		andi	t1, t0, STATUSF_IP5	/* int3 hardware line */
-		bnez	t1, ll_pcib_irq
-		andi	t1, t0, STATUSF_IP6	/* int4 hardware line */
-		bnez	t1, ll_uart_irq
-		andi	t1, t0, STATUSF_IP7	/* cpu timer */
-		bnez	t1, ll_cputimer_irq
-
-		nop
-		nop
-
-		/* now look at extended interrupts */
-		mfc0	t0, CP0_CAUSE
-		cfc0	t1, CP0_S1_INTCONTROL
-
-		/* shift the mask 8 bits left to line up the bits */
-		sll	t2, t1, 8
-
-		and	t0, t2
-		srl	t0, t0, 16
-
-		andi	t1, t0, STATUSF_IP8	/* int6 hardware line */
-		bnez	t1, ll_mv64340_decode_irq
-
-		nop
-		nop
-
-		.set	reorder
-
-		/* wrong alarm or masked ... */
-		j	spurious_interrupt
-		nop
-		END(jaguar_handle_int)
-
-		.align	5
-ll_sw0_irq:
-		li	a0, 0
-		move	a1, sp
-		jal	do_IRQ
-		j	ret_from_irq
-ll_sw1_irq:
-		li	a0, 1
-		move	a1, sp
-		jal	do_IRQ
-		j	ret_from_irq
-ll_pcixa_irq:
-		li	a0, 2
-		move	a1, sp
-		jal	do_IRQ
-		j	ret_from_irq
-
-ll_pcixb_irq:
-		li	a0, 3
-		move	a1, sp
-		jal	do_IRQ
-		j	ret_from_irq
-
-ll_pcia_irq:
-		li	a0, 4
-		move	a1, sp
-		jal	do_IRQ
-		j	ret_from_irq
-
-ll_pcib_irq:
-		li	a0, 5
-		move	a1, sp
-		jal	do_IRQ
-		j	ret_from_irq
-
-ll_uart_irq:
-		li	a0, 6
-		move	a1, sp
-		jal	do_IRQ
-		j	ret_from_irq
-
-ll_cputimer_irq:
-		li	a0, 7
-		move	a1, sp
-		jal	ll_timer_interrupt
-		j	ret_from_irq
-
-ll_mv64340_decode_irq:
-		move	a0, sp
-		jal	ll_mv64340_irq
-		j	ret_from_irq
diff --git a/arch/mips/momentum/jaguar_atx/irq.c b/arch/mips/momentum/jaguar_atx/irq.c
index 15588f91ace2..ec4032b38f19 100644
--- a/arch/mips/momentum/jaguar_atx/irq.c
+++ b/arch/mips/momentum/jaguar_atx/irq.c
@@ -10,7 +10,7 @@
  *   Copyright 2001 MontaVista Software Inc.
  *   Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
  *
- *   Copyright (C) 2000, 2001 Ralf Baechle (ralf@gnu.org)
+ *   Copyright (C) 2000, 01, 06 Ralf Baechle (ralf@linux-mips.org)
  *
  *  This program is free software; you can redistribute  it and/or modify it
  *  under  the terms of  the GNU General  Public License as published by the
@@ -38,8 +38,37 @@
 #include <linux/types.h>
 #include <asm/irq_cpu.h>
 #include <asm/mipsregs.h>
+#include <asm/time.h>
 
-extern asmlinkage void jaguar_handle_int(void);
+asmlinkage void plat_irq_dispatch(struct pt_regs *regs)
+{
+	unsigned int pending = read_c0_cause() & read_c0_status();
+
+	if (pending & STATUSF_IP0)
+		do_IRQ(0, regs);
+	else if (pending & STATUSF_IP1)
+		do_IRQ(1, regs);
+	else if (pending & STATUSF_IP2)
+		do_IRQ(2, regs);
+	else if (pending & STATUSF_IP3)
+		do_IRQ(3, regs);
+	else if (pending & STATUSF_IP4)
+		do_IRQ(4, regs);
+	else if (pending & STATUSF_IP5)
+		do_IRQ(5, regs);
+	else if (pending & STATUSF_IP6)
+		do_IRQ(6, regs);
+	else if (pending & STATUSF_IP7)
+		ll_timer_interrupt(7, regs);
+	else {
+		/*
+		 * Now look at the extended interrupts
+		 */
+		pending = (read_c0_cause() & (read_c0_intcontrol() << 8)) >> 16;
+		if (pending & STATUSF_IP8)
+			ll_mv64340_irq(regs);
+	}
+}
 
 static struct irqaction cascade_mv64340 = {
 	no_action, SA_INTERRUPT, CPU_MASK_NONE, "MV64340-Cascade", NULL, NULL
@@ -53,8 +82,6 @@ void __init arch_init_irq(void)
 	 */
 	clear_c0_status(ST0_IM);
 
-	/* Sets the first-level interrupt dispatcher. */
-	set_except_vector(0, jaguar_handle_int);
 	mips_cpu_irq_init(0);
 	rm7k_cpu_irq_init(8);
 
diff --git a/arch/mips/momentum/jaguar_atx/setup.c b/arch/mips/momentum/jaguar_atx/setup.c
index 91d9637143d7..1379c76845dc 100644
--- a/arch/mips/momentum/jaguar_atx/setup.c
+++ b/arch/mips/momentum/jaguar_atx/setup.c
@@ -381,24 +381,24 @@ void __init plat_setup(void)
 	 * shut down ethernet ports, just to be sure our memory doesn't get
 	 * corrupted by random ethernet traffic.
 	 */
-	MV_WRITE(MV64340_ETH_TRANSMIT_QUEUE_COMMAND_REG(0), 0xff << 8);
-	MV_WRITE(MV64340_ETH_TRANSMIT_QUEUE_COMMAND_REG(1), 0xff << 8);
-	MV_WRITE(MV64340_ETH_TRANSMIT_QUEUE_COMMAND_REG(2), 0xff << 8);
-	MV_WRITE(MV64340_ETH_RECEIVE_QUEUE_COMMAND_REG(0), 0xff << 8);
-	MV_WRITE(MV64340_ETH_RECEIVE_QUEUE_COMMAND_REG(1), 0xff << 8);
-	MV_WRITE(MV64340_ETH_RECEIVE_QUEUE_COMMAND_REG(2), 0xff << 8);
-	while (MV_READ(MV64340_ETH_RECEIVE_QUEUE_COMMAND_REG(0)) & 0xff);
-	while (MV_READ(MV64340_ETH_RECEIVE_QUEUE_COMMAND_REG(1)) & 0xff);
-	while (MV_READ(MV64340_ETH_RECEIVE_QUEUE_COMMAND_REG(2)) & 0xff);
-	while (MV_READ(MV64340_ETH_TRANSMIT_QUEUE_COMMAND_REG(0)) & 0xff);
-	while (MV_READ(MV64340_ETH_TRANSMIT_QUEUE_COMMAND_REG(1)) & 0xff);
-	while (MV_READ(MV64340_ETH_TRANSMIT_QUEUE_COMMAND_REG(2)) & 0xff);
-	MV_WRITE(MV64340_ETH_PORT_SERIAL_CONTROL_REG(0),
-	         MV_READ(MV64340_ETH_PORT_SERIAL_CONTROL_REG(0)) & ~1);
-	MV_WRITE(MV64340_ETH_PORT_SERIAL_CONTROL_REG(1),
-	         MV_READ(MV64340_ETH_PORT_SERIAL_CONTROL_REG(1)) & ~1);
-	MV_WRITE(MV64340_ETH_PORT_SERIAL_CONTROL_REG(2),
-	         MV_READ(MV64340_ETH_PORT_SERIAL_CONTROL_REG(2)) & ~1);
+	MV_WRITE(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(0), 0xff << 8);
+	MV_WRITE(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(1), 0xff << 8);
+	MV_WRITE(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(2), 0xff << 8);
+	MV_WRITE(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(0), 0xff << 8);
+	MV_WRITE(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(1), 0xff << 8);
+	MV_WRITE(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(2), 0xff << 8);
+	while (MV_READ(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(0)) & 0xff);
+	while (MV_READ(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(1)) & 0xff);
+	while (MV_READ(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(2)) & 0xff);
+	while (MV_READ(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(0)) & 0xff);
+	while (MV_READ(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(1)) & 0xff);
+	while (MV_READ(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(2)) & 0xff);
+	MV_WRITE(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(0),
+	         MV_READ(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(0)) & ~1);
+	MV_WRITE(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(1),
+	         MV_READ(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(1)) & ~1);
+	MV_WRITE(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(2),
+	         MV_READ(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(2)) & ~1);
 
 	/* Turn off the Bit-Error LED */
 	JAGUAR_FPGA_WRITE(0x80, CLR);
diff --git a/arch/mips/momentum/ocelot_3/Makefile b/arch/mips/momentum/ocelot_3/Makefile
index aab8fd89f830..8bcea64dd27b 100644
--- a/arch/mips/momentum/ocelot_3/Makefile
+++ b/arch/mips/momentum/ocelot_3/Makefile
@@ -5,4 +5,4 @@
 # removes any old dependencies. DON'T put your own dependencies here
 # unless it's something special (ie not a .c file).
 #
-obj-y	 += int-handler.o irq.o prom.o reset.o setup.o
+obj-y	 += irq.o prom.o reset.o setup.o
diff --git a/arch/mips/momentum/ocelot_3/int-handler.S b/arch/mips/momentum/ocelot_3/int-handler.S
deleted file mode 100644
index 4522f09ed769..000000000000
--- a/arch/mips/momentum/ocelot_3/int-handler.S
+++ /dev/null
@@ -1,137 +0,0 @@
-/*
- * Copyright 2002 Momentum Computer Inc.
- * Author: Matthew Dharm <mdharm@momenco.com>
- *
- * Copyright 2001 MontaVista Software Inc.
- * Author: jsun@mvista.com or jsun@junsun.net
- *
- * Copyright 2004 PMC-Sierra
- * Author: Manish Lachwani (lachwani@pmc-sierra.com)
- *
- * Copyright (C) 2004 MontaVista Software Inc.
- * Author: Manish Lachwani, mlachwani@mvista.com
- *
- * First-level interrupt dispatcher for Ocelot-3 board.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#include <asm/asm.h>
-#include <asm/mipsregs.h>
-#include <asm/addrspace.h>
-#include <asm/regdef.h>
-#include <asm/stackframe.h>
-
-/*
- * First level interrupt dispatcher for Ocelot-3 board
- */
-		.align	5
-		NESTED(ocelot3_handle_int, PT_SIZE, sp)
-		SAVE_ALL
-		CLI
-		.set	at
-
-		mfc0	t0, CP0_CAUSE
-		mfc0	t2, CP0_STATUS
-
-		and	t0, t2
-
-		andi	t1, t0, STATUSF_IP0	/* sw0 software interrupt (IRQ0) */
-		bnez	t1, ll_sw0_irq
-
-		andi	t1, t0, STATUSF_IP1	/* sw1 software interrupt (IRQ1) */
-		bnez	t1, ll_sw1_irq
-
-		andi	t1, t0, STATUSF_IP2	/* int0 hardware line (IRQ2) */
-		bnez	t1, ll_pci0slot1_irq
-
-		andi	t1, t0, STATUSF_IP3	/* int1 hardware line (IRQ3) */
-		bnez	t1, ll_pci0slot2_irq
-
-		andi	t1, t0, STATUSF_IP4	/* int2 hardware line (IRQ4) */
-		bnez	t1, ll_pci1slot1_irq
-
-		andi	t1, t0, STATUSF_IP5	/* int3 hardware line (IRQ5) */
-		bnez	t1, ll_pci1slot2_irq
-
-		andi	t1, t0, STATUSF_IP6	/* int4 hardware line (IRQ6) */
-		bnez	t1, ll_uart_irq
-
-		andi	t1, t0, STATUSF_IP7	/* cpu timer (IRQ7) */
-		bnez	t1, ll_cputimer_irq
-
-                /* now look at extended interrupts */
-                mfc0    t0, CP0_CAUSE
-                cfc0    t1, CP0_S1_INTCONTROL
-
-                /* shift the mask 8 bits left to line up the bits */
-                sll     t2, t1, 8
-
-                and     t0, t2
-                srl     t0, t0, 16
-
-                andi    t1, t0, STATUSF_IP8     /* int6 hardware line (IRQ9) */
-                bnez    t1, ll_mv64340_decode_irq
-
-		.set	reorder
-
-		/* wrong alarm or masked ... */
-		j	spurious_interrupt
-		nop
-		END(ocelot3_handle_int)
-
-		.align	5
-ll_sw0_irq:
-		li	a0, 0		/* IRQ 1 */
-		move	a1, sp
-		jal	do_IRQ
-		j	ret_from_irq
-ll_sw1_irq:
-		li	a0, 1		/* IRQ 2 */
-		move	a1, sp
-		jal	do_IRQ
-		j	ret_from_irq
-
-ll_pci0slot1_irq:
-		li	a0, 2		/* IRQ 3 */
-		move	a1, sp
-		jal	do_IRQ
-		j	ret_from_irq
-
-ll_pci0slot2_irq:
-		li	a0, 3		/* IRQ 4 */
-		move	a1, sp
-		jal	do_IRQ
-		j	ret_from_irq
-
-ll_pci1slot1_irq:
-		li	a0, 4		/* IRQ 5 */
-		move	a1, sp
-		jal	do_IRQ
-		j	ret_from_irq
-
-ll_pci1slot2_irq:
-		li	a0, 5		/* IRQ 6 */
-		move	a1, sp
-		jal	do_IRQ
-		j	ret_from_irq
-
-ll_uart_irq:
-		li	a0, 6		/* IRQ 7 */
-		move	a1, sp
-		jal	do_IRQ
-		j	ret_from_irq
-
-ll_cputimer_irq:
-		li	a0, 7		/* IRQ 8 */
-		move	a1, sp
-		jal	do_IRQ
-		j	ret_from_irq
-
-ll_mv64340_decode_irq:
-		move	a0, sp
-		jal	ll_mv64340_irq
-		j	ret_from_irq
-
diff --git a/arch/mips/momentum/ocelot_3/irq.c b/arch/mips/momentum/ocelot_3/irq.c
index 42464dbd4ad2..87c63c340ae3 100644
--- a/arch/mips/momentum/ocelot_3/irq.c
+++ b/arch/mips/momentum/ocelot_3/irq.c
@@ -53,8 +53,6 @@
 #include <asm/mipsregs.h>
 #include <asm/system.h>
 
-extern asmlinkage void ocelot3_handle_int(void);
-
 static struct irqaction cascade_mv64340 = {
 	no_action, SA_INTERRUPT, CPU_MASK_NONE, "MV64340-Cascade", NULL, NULL
 };
@@ -67,9 +65,6 @@ void __init arch_init_irq(void)
 	 */
 	clear_c0_status(ST0_IM | ST0_BEV);
 
-	/* Sets the first-level interrupt dispatcher. */
-	set_except_vector(0, ocelot3_handle_int);
-	mips_cpu_irq_init(0);
 	rm7k_cpu_irq_init(8);
 
 	/* set up the cascading interrupts */
@@ -79,3 +74,36 @@ void __init arch_init_irq(void)
 	set_c0_status(ST0_IM); /* IE in the status register */
 
 }
+
+asmlinkage void plat_irq_dispatch(struct pt_regs *regs)
+{
+	unsigned int pending = read_c0_cause() & read_c0_status();
+
+	if (pending & STATUSF_IP0)
+		do_IRQ(0, regs);
+	else if (pending & STATUSF_IP1)
+		do_IRQ(1, regs);
+	else if (pending & STATUSF_IP2)
+		do_IRQ(2, regs);
+	else if (pending & STATUSF_IP3)
+		do_IRQ(3, regs);
+	else if (pending & STATUSF_IP4)
+		do_IRQ(4, regs);
+	else if (pending & STATUSF_IP5)
+		do_IRQ(5, regs);
+	else if (pending & STATUSF_IP6)
+		do_IRQ(6, regs);
+	else if (pending & STATUSF_IP7)
+		do_IRQ(7, regs);
+	else {
+		/*
+		 * Now look at the extended interrupts
+		 */
+		pending = (read_c0_cause() & (read_c0_intcontrol() << 8)) >> 16;
+
+		if (pending & STATUSF_IP8)
+			ll_mv64340_irq(regs);
+		else
+			spurious_interrupt(regs);
+	}
+}
diff --git a/arch/mips/momentum/ocelot_3/setup.c b/arch/mips/momentum/ocelot_3/setup.c
index 370e75d0e75c..c69195234309 100644
--- a/arch/mips/momentum/ocelot_3/setup.c
+++ b/arch/mips/momentum/ocelot_3/setup.c
@@ -329,22 +329,22 @@ void __init plat_setup(void)
 	/* shut down ethernet ports, just to be sure our memory doesn't get
 	 * corrupted by random ethernet traffic.
 	 */
-	MV_WRITE(MV64340_ETH_TRANSMIT_QUEUE_COMMAND_REG(0), 0xff << 8);
-	MV_WRITE(MV64340_ETH_TRANSMIT_QUEUE_COMMAND_REG(1), 0xff << 8);
-	MV_WRITE(MV64340_ETH_RECEIVE_QUEUE_COMMAND_REG(0), 0xff << 8);
-	MV_WRITE(MV64340_ETH_RECEIVE_QUEUE_COMMAND_REG(1), 0xff << 8);
+	MV_WRITE(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(0), 0xff << 8);
+	MV_WRITE(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(1), 0xff << 8);
+	MV_WRITE(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(0), 0xff << 8);
+	MV_WRITE(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(1), 0xff << 8);
 	do {}
-	  while (MV_READ(MV64340_ETH_RECEIVE_QUEUE_COMMAND_REG(0)) & 0xff);
+	  while (MV_READ(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(0)) & 0xff);
 	do {}
-	  while (MV_READ(MV64340_ETH_RECEIVE_QUEUE_COMMAND_REG(1)) & 0xff);
+	  while (MV_READ(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(1)) & 0xff);
 	do {}
-	  while (MV_READ(MV64340_ETH_TRANSMIT_QUEUE_COMMAND_REG(0)) & 0xff);
+	  while (MV_READ(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(0)) & 0xff);
 	do {}
-	  while (MV_READ(MV64340_ETH_TRANSMIT_QUEUE_COMMAND_REG(1)) & 0xff);
-	MV_WRITE(MV64340_ETH_PORT_SERIAL_CONTROL_REG(0),
-		 MV_READ(MV64340_ETH_PORT_SERIAL_CONTROL_REG(0)) & ~1);
-	MV_WRITE(MV64340_ETH_PORT_SERIAL_CONTROL_REG(1),
-		 MV_READ(MV64340_ETH_PORT_SERIAL_CONTROL_REG(1)) & ~1);
+	  while (MV_READ(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(1)) & 0xff);
+	MV_WRITE(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(0),
+		 MV_READ(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(0)) & ~1);
+	MV_WRITE(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(1),
+		 MV_READ(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(1)) & ~1);
 
 	/* Turn off the Bit-Error LED */
 	OCELOT_FPGA_WRITE(0x80, CLR);
diff --git a/arch/mips/momentum/ocelot_c/Makefile b/arch/mips/momentum/ocelot_c/Makefile
index 91240777f978..94802b4db472 100644
--- a/arch/mips/momentum/ocelot_c/Makefile
+++ b/arch/mips/momentum/ocelot_c/Makefile
@@ -2,7 +2,7 @@
 # Makefile for Momentum Computer's Ocelot-C and -CS boards.
 #
 
-obj-y	 		+= cpci-irq.o int-handler.o irq.o prom.o reset.o \
+obj-y	 		+= cpci-irq.o irq.o prom.o reset.o \
 			   setup.o uart-irq.o
 
 obj-$(CONFIG_KGDB)	+= dbg_io.o
diff --git a/arch/mips/momentum/ocelot_c/dbg_io.c b/arch/mips/momentum/ocelot_c/dbg_io.c
index 8720bccfdea2..f0a6a38fcf4d 100644
--- a/arch/mips/momentum/ocelot_c/dbg_io.c
+++ b/arch/mips/momentum/ocelot_c/dbg_io.c
@@ -73,7 +73,7 @@ void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop)
 	/* disable interrupts */
 	UART16550_WRITE(OFS_INTR_ENABLE, 0);
 
-	/* set up buad rate */
+	/* set up baud rate */
 	{
 		uint32 divisor;
 
diff --git a/arch/mips/momentum/ocelot_c/int-handler.S b/arch/mips/momentum/ocelot_c/int-handler.S
deleted file mode 100644
index 52349d9bf1be..000000000000
--- a/arch/mips/momentum/ocelot_c/int-handler.S
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- * Copyright 2002 Momentum Computer Inc.
- * Author: Matthew Dharm <mdharm@momenco.com>
- *
- * Copyright 2001 MontaVista Software Inc.
- * Author: jsun@mvista.com or jsun@junsun.net
- *
- * First-level interrupt dispatcher for Ocelot-CS board.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#include <asm/asm.h>
-#include <asm/mipsregs.h>
-#include <asm/addrspace.h>
-#include <asm/regdef.h>
-#include <asm/stackframe.h>
-#include "ocelot_c_fpga.h"
-
-/*
- * First level interrupt dispatcher for Ocelot-CS board
- */
-		.align	5
-		NESTED(ocelot_handle_int, PT_SIZE, sp)
-		SAVE_ALL
-		CLI
-		.set	at
-		mfc0	t0, CP0_CAUSE
-		mfc0	t2, CP0_STATUS
-
-		and	t0, t2
-
-		andi	t1, t0, STATUSF_IP0	/* sw0 software interrupt */
-		bnez	t1, ll_sw0_irq
-		andi	t1, t0, STATUSF_IP1	/* sw1 software interrupt */
-		bnez	t1, ll_sw1_irq
-		andi	t1, t0, STATUSF_IP2	/* int0 hardware line */
-		bnez	t1, ll_scsi_irq
-		andi	t1, t0, STATUSF_IP3	/* int1 hardware line */
-		bnez	t1, ll_uart_decode_irq
-		andi	t1, t0, STATUSF_IP4	/* int2 hardware line */
-		bnez	t1, ll_pmc_irq
-		andi	t1, t0, STATUSF_IP5	/* int3 hardware line */
-		bnez	t1, ll_cpci_decode_irq
-		andi	t1, t0, STATUSF_IP6	/* int4 hardware line */
-		bnez	t1, ll_mv64340_decode_irq
-		andi	t1, t0, STATUSF_IP7	/* cpu timer */
-		bnez	t1, ll_cputimer_irq
-
-		.set	reorder
-
-		/* wrong alarm or masked ... */
-		j	spurious_interrupt
-		nop
-		END(ocelot_handle_int)
-
-		.align	5
-ll_sw0_irq:
-		li	a0, 0
-		move	a1, sp
-		jal	do_IRQ
-		j	ret_from_irq
-ll_sw1_irq:
-		li	a0, 1
-		move	a1, sp
-		jal	do_IRQ
-		j	ret_from_irq
-ll_scsi_irq:
-		li	a0, 2
-		move	a1, sp
-		jal	do_IRQ
-		j	ret_from_irq
-
-ll_uart_decode_irq:
-		move	a0, sp
-		jal	ll_uart_irq
-		j	ret_from_irq
-
-ll_pmc_irq:
-		li	a0, 4
-		move	a1, sp
-		jal	do_IRQ
-		j	ret_from_irq
-
-ll_cpci_decode_irq:
-		move	a0, sp
-		jal	ll_cpci_irq
-		j	ret_from_irq
-
-ll_mv64340_decode_irq:
-		move	a0, sp
-		jal	ll_mv64340_irq
-		j	ret_from_irq
-
-ll_cputimer_irq:
-		li	a0, 7
-		move	a1, sp
-		jal	do_IRQ
-		j	ret_from_irq
-
diff --git a/arch/mips/momentum/ocelot_c/irq.c b/arch/mips/momentum/ocelot_c/irq.c
index a5764bc20e36..86f61ce59e53 100644
--- a/arch/mips/momentum/ocelot_c/irq.c
+++ b/arch/mips/momentum/ocelot_c/irq.c
@@ -48,7 +48,6 @@
 #include <asm/mipsregs.h>
 #include <asm/system.h>
 
-extern asmlinkage void ocelot_handle_int(void);
 extern void uart_irq_init(void);
 extern void cpci_irq_init(void);
 
@@ -60,6 +59,33 @@ static struct irqaction cascade_mv64340 = {
 	no_action, SA_INTERRUPT, CPU_MASK_NONE, "cascade via MV64340", NULL, NULL
 };
 
+extern void ll_uart_irq(struct pt_regs *regs);
+extern void ll_cpci_irq(struct pt_regs *regs);
+
+asmlinkage void plat_irq_dispatch(struct pt_regs *regs)
+{
+	unsigned int pending = read_c0_cause() & read_c0_status();
+
+	if (pending & STATUSF_IP0)
+		do_IRQ(0, regs);
+	else if (pending & STATUSF_IP1)
+		do_IRQ(1, regs);
+	else if (pending & STATUSF_IP2)
+		do_IRQ(2, regs);
+	else if (pending & STATUSF_IP3)
+		ll_uart_irq(regs);
+	else if (pending & STATUSF_IP4)
+		do_IRQ(4, regs);
+	else if (pending & STATUSF_IP5)
+		ll_cpci_irq(regs);
+	else if (pending & STATUSF_IP6)
+		ll_mv64340_irq(regs);
+	else if (pending & STATUSF_IP7)
+		do_IRQ(7, regs);
+	else
+		spurious_interrupt(regs);
+}
+
 void __init arch_init_irq(void)
 {
 	/*
@@ -68,8 +94,6 @@ void __init arch_init_irq(void)
 	 */
 	clear_c0_status(ST0_IM);
 
-	/* Sets the first-level interrupt dispatcher. */
-	set_except_vector(0, ocelot_handle_int);
 	mips_cpu_irq_init(0);
 
 	/* set up the cascading interrupts */
diff --git a/arch/mips/momentum/ocelot_g/Makefile b/arch/mips/momentum/ocelot_g/Makefile
index e5f1cb086973..adb5665d40a9 100644
--- a/arch/mips/momentum/ocelot_g/Makefile
+++ b/arch/mips/momentum/ocelot_g/Makefile
@@ -2,7 +2,7 @@
 # Makefile for Momentum Computer's Ocelot-G board.
 #
 
-obj-y	 		+= int-handler.o irq.o gt-irq.o prom.o reset.o setup.o
+obj-y	 		+= irq.o gt-irq.o prom.o reset.o setup.o
 obj-$(CONFIG_KGDB)	+= dbg_io.o
 
 EXTRA_AFLAGS := $(CFLAGS)
diff --git a/arch/mips/momentum/ocelot_g/dbg_io.c b/arch/mips/momentum/ocelot_g/dbg_io.c
index 8720bccfdea2..f0a6a38fcf4d 100644
--- a/arch/mips/momentum/ocelot_g/dbg_io.c
+++ b/arch/mips/momentum/ocelot_g/dbg_io.c
@@ -73,7 +73,7 @@ void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop)
 	/* disable interrupts */
 	UART16550_WRITE(OFS_INTR_ENABLE, 0);
 
-	/* set up buad rate */
+	/* set up baud rate */
 	{
 		uint32 divisor;
 
diff --git a/arch/mips/momentum/ocelot_g/int-handler.S b/arch/mips/momentum/ocelot_g/int-handler.S
deleted file mode 100644
index 772e8f713176..000000000000
--- a/arch/mips/momentum/ocelot_g/int-handler.S
+++ /dev/null
@@ -1,131 +0,0 @@
-/*
- * Copyright 2001 MontaVista Software Inc.
- * Author: jsun@mvista.com or jsun@junsun.net
- *
- * First-level interrupt dispatcher for ocelot board.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#include <asm/asm.h>
-#include <asm/mipsregs.h>
-#include <asm/addrspace.h>
-#include <asm/regdef.h>
-#include <asm/stackframe.h>
-
-/*
- * first level interrupt dispatcher for ocelot board -
- * We check for the timer first, then check PCI ints A and D.
- * Then check for serial IRQ and fall through.
- */
-		.align	5
-		NESTED(ocelot_handle_int, PT_SIZE, sp)
-		SAVE_ALL
-		CLI
-		.set	at
-		mfc0	t0, CP0_CAUSE
-		mfc0	t2, CP0_STATUS
-
-		and	t0, t2
-
-		 andi	t1, t0, STATUSF_IP2	/* int0 hardware line */
-		bnez	t1, ll_pri_enet_irq
-		 andi	t1, t0, STATUSF_IP3	/* int1 hardware line */
-		bnez	t1, ll_sec_enet_irq
-		 andi	t1, t0, STATUSF_IP4	/* int2 hardware line */
-		bnez	t1, ll_uart_irq
-		 andi	t1, t0, STATUSF_IP5	/* int3 hardware line */
-		bnez	t1, ll_cpci_irq
-		 andi	t1, t0, STATUSF_IP6	/* int4 hardware line */
-		bnez	t1, ll_galileo_p0_irq
-		 andi	t1, t0, STATUSF_IP7	/* cpu timer */
-		bnez	t1, ll_cputimer_irq
-
-                /* now look at the extended interrupts */
-		mfc0	t0, CP0_CAUSE
-		cfc0	t1, CP0_S1_INTCONTROL
-
-		/* shift the mask 8 bits left to line up the bits */
-		 sll	t2, t1, 8
-
-		 and	t0, t2
-		 srl	t0, t0, 16
-
-		 andi	t1, t0, STATUSF_IP8	/* int6 hardware line */
-		bnez	t1, ll_galileo_p1_irq
-		 andi	t1, t0, STATUSF_IP9	/* int7 hardware line */
-		bnez	t1, ll_pmc_irq
-		 andi	t1, t0, STATUSF_IP10	/* int8 hardware line */
-		bnez	t1, ll_cpci_abcd_irq
-		 andi	t1, t0, STATUSF_IP11	/* int9 hardware line */
-		bnez	t1, ll_testpoint_irq
-
-		.set	reorder
-
-		/* wrong alarm or masked ... */
-		j	spurious_interrupt
-		nop
-		END(ocelot_handle_int)
-
-		.align	5
-ll_pri_enet_irq:
-		li	a0, 2
-		move	a1, sp
-		jal	do_IRQ
-		j	ret_from_irq
-
-ll_sec_enet_irq:
-		li	a0, 3
-		move	a1, sp
-		jal	do_IRQ
-		j	ret_from_irq
-
-ll_uart_irq:
-		li	a0, 4
-		move	a1, sp
-		jal	do_IRQ
-		j	ret_from_irq
-
-ll_cpci_irq:
-		li	a0, 5
-		move	a1, sp
-		jal	do_IRQ
-		j	ret_from_irq
-
-ll_galileo_p0_irq:
-		li	a0, 6
-		move	a1, sp
-		jal	do_IRQ
-		j	ret_from_irq
-
-ll_cputimer_irq:
-		li	a0, 7
-		move	a1, sp
-		jal	do_IRQ
-		j	ret_from_irq
-
-ll_galileo_p1_irq:
-		li	a0, 8
-		move	a1, sp
-		jal	do_IRQ
-		j	ret_from_irq
-
-ll_pmc_irq:
-		li	a0, 9
-		move	a1, sp
-		jal	do_IRQ
-		j	ret_from_irq
-
-ll_cpci_abcd_irq:
-		li	a0, 10
-		move	a1, sp
-		jal	do_IRQ
-		j	ret_from_irq
-
-ll_testpoint_irq:
-		li	a0, 11
-		move	a1, sp
-		jal	do_IRQ
-		j	ret_from_irq
diff --git a/arch/mips/momentum/ocelot_g/irq.c b/arch/mips/momentum/ocelot_g/irq.c
index 5eb85b164205..7a4a419804f1 100644
--- a/arch/mips/momentum/ocelot_g/irq.c
+++ b/arch/mips/momentum/ocelot_g/irq.c
@@ -48,7 +48,41 @@
 #include <asm/mipsregs.h>
 #include <asm/system.h>
 
-extern asmlinkage void ocelot_handle_int(void);
+asmlinkage void plat_irq_dispatch(struct pt_regs *regs)
+{
+	unsigned int pending = read_c0_cause() & read_c0_status();
+
+	if (pending & STATUSF_IP2)
+		do_IRQ(2, regs);
+	else if (pending & STATUSF_IP3)
+		do_IRQ(3, regs);
+	else if (pending & STATUSF_IP4)
+		do_IRQ(4, regs);
+	else if (pending & STATUSF_IP5)
+		do_IRQ(5, regs);
+	else if (pending & STATUSF_IP6)
+		do_IRQ(6, regs);
+	else if (pending & STATUSF_IP7)
+		do_IRQ(7, regs);
+	else {
+		/*
+		 * Now look at the extended interrupts
+		 */
+		pending = (read_c0_cause() & (read_c0_intcontrol() << 8)) >> 16;
+
+		if (pending & STATUSF_IP8)
+			do_IRQ(8, regs);
+		else if (pending & STATUSF_IP9)
+			do_IRQ(9, regs);
+		else if (pending & STATUSF_IP10)
+			do_IRQ(10, regs);
+		else if (pending & STATUSF_IP11)
+			do_IRQ(11, regs);
+		else
+			spurious_interrupt(regs);
+	}
+}
+
 extern void gt64240_irq_init(void);
 
 void __init arch_init_irq(void)
@@ -60,8 +94,6 @@ void __init arch_init_irq(void)
 	clear_c0_status(ST0_IM);
 	local_irq_disable();
 
-	/* Sets the first-level interrupt dispatcher. */
-	set_except_vector(0, ocelot_handle_int);
 	mips_cpu_irq_init(0);
 	rm7k_cpu_irq_init(8);
 
diff --git a/arch/mips/oprofile/common.c b/arch/mips/oprofile/common.c
index 935dd851f480..c31e4cff64e0 100644
--- a/arch/mips/oprofile/common.c
+++ b/arch/mips/oprofile/common.c
@@ -14,8 +14,8 @@
 
 #include "op_impl.h"
 
-extern struct op_mips_model op_model_mipsxx __attribute__((weak));
-extern struct op_mips_model op_model_rm9000 __attribute__((weak));
+extern struct op_mips_model op_model_mipsxx_ops __attribute__((weak));
+extern struct op_mips_model op_model_rm9000_ops __attribute__((weak));
 
 static struct op_mips_model *model;
 
@@ -27,7 +27,7 @@ static int op_mips_setup(void)
 	model->reg_setup(ctr);
 
 	/* Configure the registers on all cpus.  */
-	on_each_cpu(model->cpu_setup, 0, 0, 1);
+	on_each_cpu(model->cpu_setup, NULL, 0, 1);
 
         return 0;
 }
@@ -80,13 +80,14 @@ int __init oprofile_arch_init(struct oprofile_operations *ops)
 	case CPU_24K:
 	case CPU_25KF:
 	case CPU_34K:
+	case CPU_74K:
 	case CPU_SB1:
 	case CPU_SB1A:
-		lmodel = &op_model_mipsxx;
+		lmodel = &op_model_mipsxx_ops;
 		break;
 
 	case CPU_RM9000:
-		lmodel = &op_model_rm9000;
+		lmodel = &op_model_rm9000_ops;
 		break;
 	};
 
@@ -114,5 +115,6 @@ int __init oprofile_arch_init(struct oprofile_operations *ops)
 
 void oprofile_arch_exit(void)
 {
-	model->exit();
+	if (model)
+		model->exit();
 }
diff --git a/arch/mips/oprofile/op_model_mipsxx.c b/arch/mips/oprofile/op_model_mipsxx.c
index 95d488ca0754..f26a00e13204 100644
--- a/arch/mips/oprofile/op_model_mipsxx.c
+++ b/arch/mips/oprofile/op_model_mipsxx.c
@@ -23,7 +23,7 @@
 
 #define M_COUNTER_OVERFLOW		(1UL    << 31)
 
-struct op_mips_model op_model_mipsxx;
+struct op_mips_model op_model_mipsxx_ops;
 
 static struct mipsxx_register_config {
 	unsigned int control[4];
@@ -34,7 +34,7 @@ static struct mipsxx_register_config {
 
 static void mipsxx_reg_setup(struct op_counter_config *ctr)
 {
-	unsigned int counters = op_model_mipsxx.num_counters;
+	unsigned int counters = op_model_mipsxx_ops.num_counters;
 	int i;
 
 	/* Compute the performance counter control word.  */
@@ -62,7 +62,7 @@ static void mipsxx_reg_setup(struct op_counter_config *ctr)
 
 static void mipsxx_cpu_setup (void *args)
 {
-	unsigned int counters = op_model_mipsxx.num_counters;
+	unsigned int counters = op_model_mipsxx_ops.num_counters;
 
 	switch (counters) {
 	case 4:
@@ -83,7 +83,7 @@ static void mipsxx_cpu_setup (void *args)
 /* Start all counters on current CPU */
 static void mipsxx_cpu_start(void *args)
 {
-	unsigned int counters = op_model_mipsxx.num_counters;
+	unsigned int counters = op_model_mipsxx_ops.num_counters;
 
 	switch (counters) {
 	case 4:
@@ -100,7 +100,7 @@ static void mipsxx_cpu_start(void *args)
 /* Stop all counters on current CPU */
 static void mipsxx_cpu_stop(void *args)
 {
-	unsigned int counters = op_model_mipsxx.num_counters;
+	unsigned int counters = op_model_mipsxx_ops.num_counters;
 
 	switch (counters) {
 	case 4:
@@ -116,7 +116,7 @@ static void mipsxx_cpu_stop(void *args)
 
 static int mipsxx_perfcount_handler(struct pt_regs *regs)
 {
-	unsigned int counters = op_model_mipsxx.num_counters;
+	unsigned int counters = op_model_mipsxx_ops.num_counters;
 	unsigned int control;
 	unsigned int counter;
 	int handled = 0;
@@ -187,33 +187,37 @@ static int __init mipsxx_init(void)
 
 	reset_counters(counters);
 
-	op_model_mipsxx.num_counters = counters;
+	op_model_mipsxx_ops.num_counters = counters;
 	switch (current_cpu_data.cputype) {
 	case CPU_20KC:
-		op_model_mipsxx.cpu_type = "mips/20K";
+		op_model_mipsxx_ops.cpu_type = "mips/20K";
 		break;
 
 	case CPU_24K:
-		op_model_mipsxx.cpu_type = "mips/24K";
+		op_model_mipsxx_ops.cpu_type = "mips/24K";
 		break;
 
 	case CPU_25KF:
-		op_model_mipsxx.cpu_type = "mips/25K";
+		op_model_mipsxx_ops.cpu_type = "mips/25K";
 		break;
 
 #ifndef CONFIG_SMP
 	case CPU_34K:
-		op_model_mipsxx.cpu_type = "mips/34K";
+		op_model_mipsxx_ops.cpu_type = "mips/34K";
+		break;
+
+	case CPU_74K:
+		op_model_mipsxx_ops.cpu_type = "mips/74K";
 		break;
 #endif
 
 	case CPU_5KC:
-		op_model_mipsxx.cpu_type = "mips/5K";
+		op_model_mipsxx_ops.cpu_type = "mips/5K";
 		break;
 
 	case CPU_SB1:
 	case CPU_SB1A:
-		op_model_mipsxx.cpu_type = "mips/sb1";
+		op_model_mipsxx_ops.cpu_type = "mips/sb1";
 		break;
 
 	default:
@@ -229,12 +233,12 @@ static int __init mipsxx_init(void)
 
 static void mipsxx_exit(void)
 {
-	reset_counters(op_model_mipsxx.num_counters);
+	reset_counters(op_model_mipsxx_ops.num_counters);
 
 	perf_irq = null_perf_irq;
 }
 
-struct op_mips_model op_model_mipsxx = {
+struct op_mips_model op_model_mipsxx_ops = {
 	.reg_setup	= mipsxx_reg_setup,
 	.cpu_setup	= mipsxx_cpu_setup,
 	.init		= mipsxx_init,
diff --git a/arch/mips/oprofile/op_model_rm9000.c b/arch/mips/oprofile/op_model_rm9000.c
index 9b75e41c78ef..b7063fefa65b 100644
--- a/arch/mips/oprofile/op_model_rm9000.c
+++ b/arch/mips/oprofile/op_model_rm9000.c
@@ -126,7 +126,7 @@ static void rm9000_exit(void)
 	free_irq(rm9000_perfcount_irq, NULL);
 }
 
-struct op_mips_model op_model_rm9000 = {
+struct op_mips_model op_model_rm9000_ops = {
 	.reg_setup	= rm9000_reg_setup,
 	.cpu_setup	= rm9000_cpu_setup,
 	.init		= rm9000_init,
diff --git a/arch/mips/philips/pnx8550/common/Makefile b/arch/mips/philips/pnx8550/common/Makefile
index 6e38f3bc443c..b7c638166e9f 100644
--- a/arch/mips/philips/pnx8550/common/Makefile
+++ b/arch/mips/philips/pnx8550/common/Makefile
@@ -22,6 +22,6 @@
 # under Linux.
 #
 
-obj-y := setup.o prom.o mipsIRQ.o int.o reset.o time.o proc.o platform.o
+obj-y := setup.o prom.o int.o reset.o time.o proc.o platform.o
 obj-$(CONFIG_PCI) += pci.o
 obj-$(CONFIG_KGDB) += gdb_hook.o
diff --git a/arch/mips/philips/pnx8550/common/int.c b/arch/mips/philips/pnx8550/common/int.c
index c500e2d41f2c..39ee6314f627 100644
--- a/arch/mips/philips/pnx8550/common/int.c
+++ b/arch/mips/philips/pnx8550/common/int.c
@@ -38,8 +38,6 @@
 #include <int.h>
 #include <uart.h>
 
-extern asmlinkage void cp0_irqdispatch(void);
-
 static DEFINE_SPINLOCK(irq_lock);
 
 /* default prio for interrupts */
@@ -55,7 +53,7 @@ static char gic_prio[PNX8550_INT_GIC_TOTINT] = {
 	1			//  70
 };
 
-void hw0_irqdispatch(int irq, struct pt_regs *regs)
+static void hw0_irqdispatch(int irq, struct pt_regs *regs)
 {
 	/* find out which interrupt */
 	irq = PNX8550_GIC_VECTOR_0 >> 3;
@@ -68,7 +66,7 @@ void hw0_irqdispatch(int irq, struct pt_regs *regs)
 }
 
 
-void timer_irqdispatch(int irq, struct pt_regs *regs)
+static void timer_irqdispatch(int irq, struct pt_regs *regs)
 {
 	irq = (0x01c0 & read_c0_config7()) >> 6;
 
@@ -88,6 +86,20 @@ void timer_irqdispatch(int irq, struct pt_regs *regs)
 	}
 }
 
+asmlinkage void plat_irq_dispatch(struct pt_regs *regs)
+{
+	unsigned int pending = read_c0_status() & read_c0_cause();
+
+	if (pending & STATUSF_IP2)
+		do_IRQ(2, regs);
+	else if (pending & STATUSF_IP7) {
+		if (read_c0_config7() & 0x01c0)
+			timer_irqdispatch(7, regs);
+	}
+
+	spurious_interrupt(regs);
+}
+
 static inline void modify_cp0_intmask(unsigned clr_mask, unsigned set_mask)
 {
 	unsigned long status = read_c0_status();
@@ -223,9 +235,6 @@ void __init arch_init_irq(void)
 	int i;
 	int configPR;
 
-	/* init of cp0 interrupts */
-	set_except_vector(0, cp0_irqdispatch);
-
 	for (i = 0; i < PNX8550_INT_CP0_TOTINT; i++) {
 		irq_desc[i].handler = &level_irq_type;
 		pnx8550_ack(i);	/* mask the irq just in case  */
diff --git a/arch/mips/philips/pnx8550/common/mipsIRQ.S b/arch/mips/philips/pnx8550/common/mipsIRQ.S
deleted file mode 100644
index 338bffda3fab..000000000000
--- a/arch/mips/philips/pnx8550/common/mipsIRQ.S
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- * Copyright (c) 2002 Philips, Inc. All rights.
- * Copyright (c) 2002 Red Hat, Inc. All rights.
- *
- * This software may be freely redistributed under the terms of the
- * GNU General Public License.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Based upon arch/mips/galileo-boards/ev64240/int-handler.S
- *
- */
-#include <asm/asm.h>
-#include <asm/mipsregs.h>
-#include <asm/addrspace.h>
-#include <asm/regdef.h>
-#include <asm/stackframe.h>
-
-/*
- * cp0_irqdispatch
- *
- *    Code to handle in-core interrupt exception.
- */
-
-		.align	5
-		.set	reorder
-		.set	noat
-		NESTED(cp0_irqdispatch, PT_SIZE, sp)
-		SAVE_ALL
-		CLI
-		.set	at
-		mfc0	t0,CP0_CAUSE
-		mfc0	t2,CP0_STATUS
-
-		and	t0,t2
-
-		andi	t1,t0,STATUSF_IP2 /* int0 hardware line */
-		bnez	t1,ll_hw0_irq
-		nop
-
-		andi	t1,t0,STATUSF_IP7 /* int5 hardware line */
-		bnez	t1,ll_timer_irq
-		nop
-
-		/* wrong alarm or masked ... */
-
-		j	spurious_interrupt
-		nop
-		END(cp0_irqdispatch)
-
-		.align	5
-		.set	reorder
-ll_hw0_irq:
-		li	a0,2
-		move	a1,sp
-		jal	hw0_irqdispatch
-		nop
-		j	ret_from_irq
-		nop
-
-		.align	5
-		.set	reorder
-ll_timer_irq:
-		mfc0	t3,CP0_CONFIG,7
-		andi	t4,t3,0x01c0
-		beqz	t4,ll_timer_out
-		nop
-		li	a0,7
-		move	a1,sp
-		jal	timer_irqdispatch
-		nop
-
-ll_timer_out:	j	ret_from_irq
-		nop
diff --git a/arch/mips/philips/pnx8550/common/platform.c b/arch/mips/philips/pnx8550/common/platform.c
index a592260fd673..5436b4b97455 100644
--- a/arch/mips/philips/pnx8550/common/platform.c
+++ b/arch/mips/philips/pnx8550/common/platform.c
@@ -18,6 +18,7 @@
 #include <linux/resource.h>
 #include <linux/serial.h>
 #include <linux/serial_ip3106.h>
+#include <linux/platform_device.h>
 
 #include <int.h>
 #include <usb.h>
diff --git a/arch/mips/pmc-sierra/yosemite/Makefile b/arch/mips/pmc-sierra/yosemite/Makefile
index ae96a71a3089..e931e0d44229 100644
--- a/arch/mips/pmc-sierra/yosemite/Makefile
+++ b/arch/mips/pmc-sierra/yosemite/Makefile
@@ -2,7 +2,7 @@
 # Makefile for the PMC-Sierra Titan
 #
 
-obj-y    += irq-handler.o irq.o i2c-yosemite.o prom.o py-console.o setup.o
+obj-y    += irq.o i2c-yosemite.o prom.o py-console.o setup.o
 
 obj-$(CONFIG_KGDB)		+= dbg_io.o
 obj-$(CONFIG_SMP)		+= smp.o
diff --git a/arch/mips/pmc-sierra/yosemite/irq-handler.S b/arch/mips/pmc-sierra/yosemite/irq-handler.S
deleted file mode 100644
index 33b9c40d4f5c..000000000000
--- a/arch/mips/pmc-sierra/yosemite/irq-handler.S
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
- * Copyright 2003, 04 PMC-Sierra Inc.
- * Author: Manish Lachwani (lachwani@pmc-sierra.com
- * Copyright 2004 Ralf Baechle (ralf@linux-mips.org)
- *
- * First-level interrupt router for the PMC-Sierra Titan board
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- * Titan supports Hypertransport or PCI but not both. Hence, one interrupt
- * line is shared between the PCI slot A and Hypertransport. This is the
- * Processor INTB #0.
- */
-
-#include <linux/config.h>
-#include <asm/asm.h>
-#include <asm/mipsregs.h>
-#include <asm/addrspace.h>
-#include <asm/regdef.h>
-#include <asm/stackframe.h>
-
-		.align	5
-		NESTED(titan_handle_int, PT_SIZE, sp)
-		SAVE_ALL
-		CLI
-		.set	at
-		.set	noreorder
-		la	ra, ret_from_irq
-		mfc0	t0, CP0_CAUSE
-		mfc0	t2, CP0_STATUS
-
-		and	t0, t2
-
-		andi	t2, t0, STATUSF_IP7	/* INTB5 hardware line */
-		bnez	t2, ll_timer_irq	/* Timer */
-		andi	t1, t0, STATUSF_IP2	/* INTB0 hardware line */
-		bnez	t1, ll_pcia_irq		/* 64-bit PCI */
-		andi	t2, t0, STATUSF_IP3	/* INTB1 hardware line */
-		bnez	t2, ll_pcib_irq		/* second 64-bit PCI slot */
-		andi	t1, t0, STATUSF_IP4	/* INTB2 hardware line */
-		bnez	t1, ll_duart_irq	/* UART	*/
-		andi    t2, t0, STATUSF_IP5	/* SMP inter-core interrupts */
-		bnez    t2, ll_smp_irq
-		andi	t1, t0, STATUSF_IP6
-		bnez	t1, ll_ht_irq		/* Hypertransport */
-
-		move	a0, sp
-		j	do_extended_irq
-		END(titan_handle_int)
-
-		.set	reorder
-		.align	5
-
-ll_pcia_irq:
-		li	a0, 2
-		move	a1, sp
-#ifdef CONFIG_HYPERTRANSPORT
-		j	ll_ht_smp_irq_handler
-#else
-		j	do_IRQ
-#endif
-
-ll_pcib_irq:
-		li	a0, 3
-		move	a1, sp
-		j	do_IRQ
-
-ll_duart_irq:
-		li	a0, 4
-		move	a1, sp
-		j	do_IRQ
-
-ll_smp_irq:
-		li	a0, 5
-		move	a1, sp
-#ifdef CONFIG_SMP
-		j	titan_mailbox_irq
-#else
-		j	do_IRQ
-#endif
-
-ll_ht_irq:
-		li	a0, 6
-		move	a1, sp
-		j	ll_ht_smp_irq_handler
-
-ll_timer_irq:
-		li	a0, 7
-		move	a1, sp
-		j	do_IRQ
diff --git a/arch/mips/pmc-sierra/yosemite/irq.c b/arch/mips/pmc-sierra/yosemite/irq.c
index f4e2897d9bf7..a1f524fc4c10 100644
--- a/arch/mips/pmc-sierra/yosemite/irq.c
+++ b/arch/mips/pmc-sierra/yosemite/irq.c
@@ -2,6 +2,8 @@
  * Copyright (C) 2003 PMC-Sierra Inc.
  * Author: Manish Lachwani (lachwani@pmc-sierra.com)
  *
+ * Copyright (C) 2006 Ralf Baechle (ralf@linux-mips.org)
+ *
  *  This program is free software; you can redistribute  it and/or modify it
  *  under  the terms of  the GNU General  Public License as published by the
  *  Free Software Foundation;  either version 2 of the  License, or (at your
@@ -55,7 +57,6 @@
 #define HYPERTRANSPORT_INTC     0x7a		/* INTC# */
 #define HYPERTRANSPORT_INTD     0x7b		/* INTD# */
 
-extern asmlinkage void titan_handle_int(void);
 extern void jaguar_mailbox_irq(struct pt_regs *);
 
 /*
@@ -125,6 +126,35 @@ asmlinkage void do_extended_irq(struct pt_regs *regs)
 
 }
 
+asmlinkage void plat_irq_dispatch(struct pt_regs *regs)
+{
+	unsigned int cause = read_c0_cause();
+	unsigned int status = read_c0_status();
+	unsigned int pending = cause & status;
+
+	if (pending & STATUSF_IP7) {
+		do_IRQ(7, regs);
+	} else if (pending & STATUSF_IP2) {
+#ifdef CONFIG_HYPERTRANSPORT
+		ll_ht_smp_irq_handler(2, regs);
+#else
+		do_IRQ(2, regs);
+#endif
+	} else if (pending & STATUSF_IP3) {
+		do_IRQ(3, regs);
+	} else if (pending & STATUSF_IP4) {
+		do_IRQ(4, regs);
+	} else if (pending & STATUSF_IP5) {
+#ifdef CONFIG_SMP
+		titan_mailbox_irq(regs);
+#else
+		do_IRQ(5, regs);
+#endif
+	} else if (pending & STATUSF_IP6) {
+		do_IRQ(4, regs);
+	}
+}
+
 #ifdef CONFIG_KGDB
 extern void init_second_port(void);
 #endif
@@ -136,7 +166,6 @@ void __init arch_init_irq(void)
 {
 	clear_c0_status(ST0_IM);
 
-	set_except_vector(0, titan_handle_int);
 	mips_cpu_irq_init(0);
 	rm7k_cpu_irq_init(8);
 	rm9k_cpu_irq_init(12);
diff --git a/arch/mips/qemu/Makefile b/arch/mips/qemu/Makefile
index 6a8e8bcef552..730f459f3e99 100644
--- a/arch/mips/qemu/Makefile
+++ b/arch/mips/qemu/Makefile
@@ -2,6 +2,6 @@
 # Makefile for Qemu specific kernel interface routines under Linux.
 #
 
-obj-y		= q-firmware.o q-int.o q-irq.o q-mem.o q-setup.o
+obj-y		= q-firmware.o q-irq.o q-mem.o q-setup.o
 
 obj-$(CONFIG_SMP) += q-smp.o
diff --git a/arch/mips/qemu/q-int.S b/arch/mips/qemu/q-int.S
deleted file mode 100644
index 6e3dfe5eb14b..000000000000
--- a/arch/mips/qemu/q-int.S
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * Qemu interrupt handler code.
- *
- * Copyright (C) 2005 by Ralf Baechle
- */
-#include <asm/asm.h>
-#include <asm/regdef.h>
-#include <asm/stackframe.h>
-
-	.align	5
-	NESTED(qemu_handle_int, PT_SIZE, sp)
-	SAVE_ALL
-	CLI
-	move	a0, sp
-	PTR_LA	ra, ret_from_irq
-	j	do_qemu_int
-	END(qemu_handle_int)
diff --git a/arch/mips/qemu/q-irq.c b/arch/mips/qemu/q-irq.c
index 2c4e0704ff10..3352374c4c7d 100644
--- a/arch/mips/qemu/q-irq.c
+++ b/arch/mips/qemu/q-irq.c
@@ -9,7 +9,7 @@
 
 extern asmlinkage void qemu_handle_int(void);
 
-asmlinkage void do_qemu_int(struct pt_regs *regs)
+asmlinkage void plat_irq_dispatch(struct pt_regs *regs)
 {
 	unsigned int pending = read_c0_status() & read_c0_cause();
 
@@ -29,7 +29,6 @@ asmlinkage void do_qemu_int(struct pt_regs *regs)
 
 void __init arch_init_irq(void)
 {
-	set_except_vector(0, qemu_handle_int);
 	mips_hpt_frequency = QEMU_C0_COUNTER_CLOCK;		/* 100MHz */
 
 	init_i8259_irqs();
diff --git a/arch/mips/sgi-ip22/Makefile b/arch/mips/sgi-ip22/Makefile
index eb0820fe50bd..6aa4c0cd169c 100644
--- a/arch/mips/sgi-ip22/Makefile
+++ b/arch/mips/sgi-ip22/Makefile
@@ -3,7 +3,7 @@
 # under Linux.
 #
 
-obj-y	+= ip22-mc.o ip22-hpc.o ip22-int.o ip22-irq.o ip22-berr.o \
+obj-y	+= ip22-mc.o ip22-hpc.o ip22-int.o ip22-berr.o \
 	   ip22-time.o ip22-nvram.o ip22-reset.o ip22-setup.o
 
 obj-$(CONFIG_EISA)	+= ip22-eisa.o
diff --git a/arch/mips/sgi-ip22/ip22-int.c b/arch/mips/sgi-ip22/ip22-int.c
index d16fb43b1a93..fc6a7e2b189c 100644
--- a/arch/mips/sgi-ip22/ip22-int.c
+++ b/arch/mips/sgi-ip22/ip22-int.c
@@ -37,7 +37,6 @@ static char lc1msk_to_irqnr[256];
 static char lc2msk_to_irqnr[256];
 static char lc3msk_to_irqnr[256];
 
-extern asmlinkage void indyIRQ(void);
 extern int ip22_eisa_init(void);
 
 static void enable_local0_irq(unsigned int irq)
@@ -224,7 +223,7 @@ static struct hw_interrupt_type ip22_local3_irq_type = {
 	.end		= end_local3_irq,
 };
 
-void indy_local0_irqdispatch(struct pt_regs *regs)
+static void indy_local0_irqdispatch(struct pt_regs *regs)
 {
 	u8 mask = sgint->istat0 & sgint->imask0;
 	u8 mask2;
@@ -242,7 +241,7 @@ void indy_local0_irqdispatch(struct pt_regs *regs)
 	return;
 }
 
-void indy_local1_irqdispatch(struct pt_regs *regs)
+static void indy_local1_irqdispatch(struct pt_regs *regs)
 {
 	u8 mask = sgint->istat1 & sgint->imask1;
 	u8 mask2;
@@ -262,7 +261,7 @@ void indy_local1_irqdispatch(struct pt_regs *regs)
 
 extern void ip22_be_interrupt(int irq, struct pt_regs *regs);
 
-void indy_buserror_irq(struct pt_regs *regs)
+static void indy_buserror_irq(struct pt_regs *regs)
 {
 	int irq = SGI_BUSERR_IRQ;
 
@@ -307,6 +306,56 @@ static struct irqaction map1_cascade = {
 #define SGI_INTERRUPTS	SGINT_LOCAL3
 #endif
 
+extern void indy_r4k_timer_interrupt(struct pt_regs *regs);
+extern void indy_8254timer_irq(struct pt_regs *regs);
+
+/*
+ * IRQs on the INDY look basically (barring software IRQs which we don't use
+ * at all) like:
+ *
+ *	MIPS IRQ	Source
+ *      --------        ------
+ *             0	Software (ignored)
+ *             1        Software (ignored)
+ *             2        Local IRQ level zero
+ *             3        Local IRQ level one
+ *             4        8254 Timer zero
+ *             5        8254 Timer one
+ *             6        Bus Error
+ *             7        R4k timer (what we use)
+ *
+ * We handle the IRQ according to _our_ priority which is:
+ *
+ * Highest ----     R4k Timer
+ *                  Local IRQ zero
+ *                  Local IRQ one
+ *                  Bus Error
+ *                  8254 Timer zero
+ * Lowest  ----     8254 Timer one
+ *
+ * then we just return, if multiple IRQs are pending then we will just take
+ * another exception, big deal.
+ */
+
+asmlinkage void plat_irq_dispatch(struct pt_regs *regs)
+{
+	unsigned int pending = read_c0_cause();
+
+	/*
+	 * First we check for r4k counter/timer IRQ.
+	 */
+	if (pending & CAUSEF_IP7)
+		indy_r4k_timer_interrupt(regs);
+	else if (pending & CAUSEF_IP2)
+		indy_local0_irqdispatch(regs);
+	else if (pending & CAUSEF_IP3)
+		indy_local1_irqdispatch(regs);
+	else if (pending & CAUSEF_IP6)
+		indy_buserror_irq(regs);
+	else if (pending & (CAUSEF_IP4 | CAUSEF_IP5))
+		indy_8254timer_irq(regs);
+}
+
 extern void mips_cpu_irq_init(unsigned int irq_base);
 
 void __init arch_init_irq(void)
@@ -369,8 +418,6 @@ void __init arch_init_irq(void)
 	sgint->cmeimask0 = 0;
 	sgint->cmeimask1 = 0;
 
-	set_except_vector(0, indyIRQ);
-
 	/* init CPU irqs */
 	mips_cpu_irq_init(SGINT_CPU);
 
diff --git a/arch/mips/sgi-ip22/ip22-irq.S b/arch/mips/sgi-ip22/ip22-irq.S
deleted file mode 100644
index 6ccbd9e1d967..000000000000
--- a/arch/mips/sgi-ip22/ip22-irq.S
+++ /dev/null
@@ -1,118 +0,0 @@
-/*
- * ip22-irq.S: Interrupt exception dispatch code for FullHouse and
- *             Guiness.
- *
- * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com)
- */
-
-#include <asm/asm.h>
-#include <asm/mipsregs.h>
-#include <asm/regdef.h>
-#include <asm/stackframe.h>
-
-/* A lot of complication here is taken away because:
- *
- * 1) We handle one interrupt and return, sitting in a loop and moving across
- *    all the pending IRQ bits in the cause register is _NOT_ the answer, the
- *    common case is one pending IRQ so optimize in that direction.
- *
- * 2) We need not check against bits in the status register IRQ mask, that
- *    would make this routine slow as hell.
- *
- * 3) Linux only thinks in terms of all IRQs on or all IRQs off, nothing in
- *    between like BSD spl() brain-damage.
- *
- * Furthermore, the IRQs on the INDY look basically (barring software IRQs
- * which we don't use at all) like:
- *
- *	MIPS IRQ	Source
- *      --------        ------
- *             0	Software (ignored)
- *             1        Software (ignored)
- *             2        Local IRQ level zero
- *             3        Local IRQ level one
- *             4        8254 Timer zero
- *             5        8254 Timer one
- *             6        Bus Error
- *             7        R4k timer (what we use)
- *
- * We handle the IRQ according to _our_ priority which is:
- *
- * Highest ----     R4k Timer
- *                  Local IRQ zero
- *                  Local IRQ one
- *                  Bus Error
- *                  8254 Timer zero
- * Lowest  ----     8254 Timer one
- *
- * then we just return, if multiple IRQs are pending then we will just take
- * another exception, big deal.
- */
-
-	.text
-	.set	noreorder
-	.set	noat
-	.align	5
-	NESTED(indyIRQ, PT_SIZE, sp)
-	SAVE_ALL
-	CLI
-	.set	at
-	mfc0	s0, CP0_CAUSE		# get irq mask
-
-	/* First we check for r4k counter/timer IRQ. */
-	andi	a0, s0, CAUSEF_IP7
-	beq	a0, zero, 1f
-	 andi	a0, s0, CAUSEF_IP2	# delay slot, check local level zero
-
-	/* Wheee, a timer interrupt. */
-	jal	indy_r4k_timer_interrupt
-	 move	a0, sp			# delay slot
-	j	ret_from_irq
-	 nop				# delay slot
-
-1:
-	beq	a0, zero, 1f
-	 andi	a0, s0, CAUSEF_IP3	# delay slot, check local level one
-
-	/* Wheee, local level zero interrupt. */
-	jal	indy_local0_irqdispatch
-	 move	a0, sp			# delay slot
-
-	j	ret_from_irq
-	 nop				# delay slot
-
-1:
-	beq	a0, zero, 1f
-	 andi	a0, s0, CAUSEF_IP6	# delay slot, check bus error
-
-	/* Wheee, local level one interrupt. */
-	jal	indy_local1_irqdispatch
-	 move	a0, sp			# delay slot
-	j	ret_from_irq
-	 nop				# delay slot
-
-1:
-	beq	a0, zero, 1f
-	 andi	a0, s0, (CAUSEF_IP4 | CAUSEF_IP5)	# delay slot
-
-	/* Wheee, an asynchronous bus error... */
-	jal	indy_buserror_irq
-	 move	a0, sp			# delay slot
-	j	ret_from_irq
-	 nop				# delay slot
-
-1:
-	/* Here by mistake? It is possible, that by the time we take
-	 * the exception the IRQ pin goes low, so just leave if this
-	 * is the case.
-	 */
-	beq	a0, zero, 1f
-	 nop			  	# delay slot
-
-	/* Must be one of the 8254 timers... */
-	jal	indy_8254timer_irq
-	 move	a0, sp			# delay slot
-1:
-	j	ret_from_irq
-	 nop				# delay slot
-	END(indyIRQ)
diff --git a/arch/mips/sgi-ip27/Makefile b/arch/mips/sgi-ip27/Makefile
index 4ba340780c35..686ba14e2882 100644
--- a/arch/mips/sgi-ip27/Makefile
+++ b/arch/mips/sgi-ip27/Makefile
@@ -2,7 +2,7 @@
 # Makefile for the IP27 specific kernel interface routines under Linux.
 #
 
-obj-y	:= ip27-berr.o ip27-console.o ip27-irq.o ip27-init.o ip27-irq-glue.o \
+obj-y	:= ip27-berr.o ip27-console.o ip27-irq.o ip27-init.o \
 	   ip27-klconfig.o ip27-klnuma.o ip27-memory.o ip27-nmi.o ip27-reset.o \
 	   ip27-timer.o ip27-hubio.o ip27-xtalk.o
 
diff --git a/arch/mips/sgi-ip27/TODO b/arch/mips/sgi-ip27/TODO
index 32106131b0d0..19f1512c8f2e 100644
--- a/arch/mips/sgi-ip27/TODO
+++ b/arch/mips/sgi-ip27/TODO
@@ -9,10 +9,6 @@ ip27-init.c:find_lbaord_real. DONE
 in irix?
 6. Investigate why things do not work without the setup_test() call
 being invoked on all nodes in ip27-memory.c.
-7. Too many CLIs in the locore handlers :
-For the low level handlers set up by set_except_vector(),
-__tlb_refill_debug_tramp, __xtlb_refill_debug_tramp and cacheerror,
-investigate whether the code should do CLI, STI or KMODE.
 8. Too many do_page_faults invoked - investigate.
 9. start_thread must turn off UX64 ... and define tlb_refill_debug.
 10. Need a bad pmd table, bad pte table. __bad_pmd_table/__bad_pagetable
diff --git a/arch/mips/sgi-ip27/ip27-irq-glue.S b/arch/mips/sgi-ip27/ip27-irq-glue.S
deleted file mode 100644
index c304df715e0a..000000000000
--- a/arch/mips/sgi-ip27/ip27-irq-glue.S
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1999 Ralf Baechle
- * Copyright (C) 1999 Silicon Graphics, Inc.
- */
-#include <asm/asm.h>
-#include <asm/mipsregs.h>
-#include <asm/regdef.h>
-#include <asm/stackframe.h>
-
-	.text
-	.align	5
-NESTED(ip27_irq, PT_SIZE, sp)
-	SAVE_ALL
-	CLI
-
-	mfc0	s0, CP0_CAUSE
-	mfc0	t0, CP0_STATUS
-	and	s0, t0
-	move	a0, sp
-	PTR_LA	ra, ret_from_irq
-
-	/* First check for RT interrupt.  */
-	andi	t0, s0, CAUSEF_IP4
-	bnez	t0, ip4
-	andi	t0, s0, CAUSEF_IP2
-	bnez	t0, ip2
-	andi	t0, s0, CAUSEF_IP3
-	bnez	t0, ip3
-	andi	t0, s0, CAUSEF_IP5
-	bnez	t0, ip5
-	andi	t0, s0, CAUSEF_IP6
-	bnez	t0, ip6
-	j	ra
-
-ip2:	j	ip27_do_irq_mask0	# PI_INT_PEND_0 or CC_PEND_{A|B}
-ip3:	j	ip27_do_irq_mask1	# PI_INT_PEND_1
-ip4:	j	ip27_rt_timer_interrupt
-ip5:	j	ip27_prof_timer
-ip6:	j	ip27_hub_error
-
-	END(ip27_irq)
diff --git a/arch/mips/sgi-ip27/ip27-irq.c b/arch/mips/sgi-ip27/ip27-irq.c
index 2854ac4c9be1..2e643d2f51cb 100644
--- a/arch/mips/sgi-ip27/ip27-irq.c
+++ b/arch/mips/sgi-ip27/ip27-irq.c
@@ -130,7 +130,7 @@ static int ms1bit(unsigned long x)
  * Kanoj 05.13.00
  */
 
-void ip27_do_irq_mask0(struct pt_regs *regs)
+static void ip27_do_irq_mask0(struct pt_regs *regs)
 {
 	int irq, swlevel;
 	hubreg_t pend0, mask0;
@@ -171,7 +171,7 @@ void ip27_do_irq_mask0(struct pt_regs *regs)
 	LOCAL_HUB_L(PI_INT_PEND0);
 }
 
-void ip27_do_irq_mask1(struct pt_regs *regs)
+static void ip27_do_irq_mask1(struct pt_regs *regs)
 {
 	int irq, swlevel;
 	hubreg_t pend1, mask1;
@@ -196,12 +196,12 @@ void ip27_do_irq_mask1(struct pt_regs *regs)
 	LOCAL_HUB_L(PI_INT_PEND1);
 }
 
-void ip27_prof_timer(struct pt_regs *regs)
+static void ip27_prof_timer(struct pt_regs *regs)
 {
 	panic("CPU %d got a profiling interrupt", smp_processor_id());
 }
 
-void ip27_hub_error(struct pt_regs *regs)
+static void ip27_hub_error(struct pt_regs *regs)
 {
 	panic("CPU %d got a hub error interrupt", smp_processor_id());
 }
@@ -421,9 +421,26 @@ int __devinit request_bridge_irq(struct bridge_controller *bc)
 	return irq;
 }
 
+extern void ip27_rt_timer_interrupt(struct pt_regs *regs);
+
+asmlinkage void plat_irq_dispatch(struct pt_regs *regs)
+{
+	unsigned long pending = read_c0_cause() & read_c0_status();
+
+	if (pending & CAUSEF_IP4)
+		ip27_rt_timer_interrupt(regs);
+	else if (pending & CAUSEF_IP2)	/* PI_INT_PEND_0 or CC_PEND_{A|B} */
+		ip27_do_irq_mask0(regs);
+	else if (pending & CAUSEF_IP3)	/* PI_INT_PEND_1 */
+		ip27_do_irq_mask1(regs);
+	else if (pending & CAUSEF_IP5)
+		ip27_prof_timer(regs);
+	else if (pending & CAUSEF_IP6)
+		ip27_hub_error(regs);
+}
+
 void __init arch_init_irq(void)
 {
-	set_except_vector(0, ip27_irq);
 }
 
 void install_ipi(void)
diff --git a/arch/mips/sgi-ip27/ip27-timer.c b/arch/mips/sgi-ip27/ip27-timer.c
index cddf1cedf007..36b662e27b6e 100644
--- a/arch/mips/sgi-ip27/ip27-timer.c
+++ b/arch/mips/sgi-ip27/ip27-timer.c
@@ -122,7 +122,7 @@ again:
 	    xtime.tv_sec > last_rtc_update + 660 &&
 	    (xtime.tv_nsec / 1000) >= 500000 - ((unsigned) TICK_SIZE) / 2 &&
 	    (xtime.tv_nsec / 1000) <= 500000 + ((unsigned) TICK_SIZE) / 2) {
-		if (rtc_set_time(xtime.tv_sec) == 0) {
+		if (rtc_mips_set_time(xtime.tv_sec) == 0) {
 			last_rtc_update = xtime.tv_sec;
 		} else {
 			last_rtc_update = xtime.tv_sec - 600;
diff --git a/arch/mips/sgi-ip32/Makefile b/arch/mips/sgi-ip32/Makefile
index 470898f4afe1..530bf848c3d0 100644
--- a/arch/mips/sgi-ip32/Makefile
+++ b/arch/mips/sgi-ip32/Makefile
@@ -3,7 +3,7 @@
 # under Linux.
 #
 
-obj-y	+= ip32-berr.o ip32-irq.o ip32-irq-glue.o ip32-setup.o ip32-reset.o \
+obj-y	+= ip32-berr.o ip32-irq.o ip32-setup.o ip32-reset.o \
 	   crime.o ip32-memory.o
 
 EXTRA_AFLAGS := $(CFLAGS)
diff --git a/arch/mips/sgi-ip32/ip32-irq-glue.S b/arch/mips/sgi-ip32/ip32-irq-glue.S
deleted file mode 100644
index 200924e1c4f5..000000000000
--- a/arch/mips/sgi-ip32/ip32-irq-glue.S
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- * Low level interrupt handler for the SGI O2 aka IP32 aka Moosehead
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2000 Harald Koerfgen
- * Copyright (C) 2001 Keith M Wesolowski
- */
-#include <asm/asm.h>
-#include <asm/regdef.h>
-#include <asm/mipsregs.h>
-#include <asm/stackframe.h>
-#include <asm/addrspace.h>
-
-		.text
-		.set    noreorder
-		.set    noat
-		.align  5
-		NESTED(ip32_handle_int, PT_SIZE, ra)
-		.set    noat
-		SAVE_ALL
-		CLI			# TEST: interrupts should be off
-		.set    at
-		.set    noreorder
-
-		mfc0	s0,CP0_CAUSE
-
-		andi	t1, s0, IE_IRQ0
-		bnez	t1, handle_irq0
-		 andi	t1, s0, IE_IRQ1
-		bnez	t1, handle_irq1
-		 andi	t1, s0, IE_IRQ2
-		bnez	t1, handle_irq2
-		 andi	t1, s0, IE_IRQ3
-		bnez	t1, handle_irq3
-		 andi	t1, s0, IE_IRQ4
-		bnez	t1, handle_irq4
-		 andi	t1, s0, IE_IRQ5
-		bnez	t1, handle_irq5
-		 nop
-
-		/* Either someone has triggered the "software interrupts"
-		 * or we lost an interrupt somehow.  Ignore it.
-		 */
-		j	ret_from_irq
-		 nop
-
-handle_irq0:
-		jal	ip32_irq0
-		 move	a0, sp
-		j	ret_from_irq
-		 nop
-
-handle_irq1:
-		jal	ip32_irq1
-		 move	a0, sp
-		j	ret_from_irq
-		 nop
-
-handle_irq2:
-		jal	ip32_irq2
-		 move	a0, sp
-		j	ret_from_irq
-		 nop
-
-handle_irq3:
-		jal	ip32_irq3
-		 move	a0, sp
-		j	ret_from_irq
-		 nop
-
-handle_irq4:
-		jal	ip32_irq4
-		 move	a0, sp
-		j	ret_from_irq
-		 nop
-
-handle_irq5:
-		jal	ip32_irq5
-		move	a0, sp
-		j	ret_from_irq
-		 nop
-
-		END(ip32_handle_int)
diff --git a/arch/mips/sgi-ip32/ip32-irq.c b/arch/mips/sgi-ip32/ip32-irq.c
index 2eb22d692ed9..8ba08047d164 100644
--- a/arch/mips/sgi-ip32/ip32-irq.c
+++ b/arch/mips/sgi-ip32/ip32-irq.c
@@ -31,12 +31,12 @@
 /* issue a PIO read to make sure no PIO writes are pending */
 static void inline flush_crime_bus(void)
 {
-	volatile unsigned long junk = crime->control;
+	crime->control;
 }
 
 static void inline flush_mace_bus(void)
 {
-	volatile unsigned long junk = mace->perif.ctrl.misc;
+	mace->perif.ctrl.misc;
 }
 
 #undef DEBUG_IRQ
@@ -130,8 +130,6 @@ struct irqaction memerr_irq = { crime_memerr_intr, SA_INTERRUPT,
 struct irqaction cpuerr_irq = { crime_cpuerr_intr, SA_INTERRUPT,
 			CPU_MASK_NONE, "CRIME CPU error", NULL, NULL };
 
-extern void ip32_handle_int(void);
-
 /*
  * For interrupts wired from a single device to the CPU.  Only the clock
  * uses this it seems, which is IRQ 0 and IP7.
@@ -503,48 +501,67 @@ static void ip32_unknown_interrupt(struct pt_regs *regs)
 
 /* CRIME 1.1 appears to deliver all interrupts to this one pin. */
 /* change this to loop over all edge-triggered irqs, exception masked out ones */
-void ip32_irq0(struct pt_regs *regs)
+static void ip32_irq0(struct pt_regs *regs)
 {
 	uint64_t crime_int;
 	int irq = 0;
 
 	crime_int = crime->istat & crime_mask;
-	irq = ffs(crime_int);
-	crime_int = 1 << (irq - 1);
+	irq = __ffs(crime_int);
+	crime_int = 1 << irq;
 
 	if (crime_int & CRIME_MACEISA_INT_MASK) {
 		unsigned long mace_int = mace->perif.ctrl.istat;
-		irq = ffs(mace_int & maceisa_mask) + 32;
+		irq = __ffs(mace_int & maceisa_mask) + 32;
 	}
+	irq++;
 	DBG("*irq %u*\n", irq);
 	do_IRQ(irq, regs);
 }
 
-void ip32_irq1(struct pt_regs *regs)
+static void ip32_irq1(struct pt_regs *regs)
 {
 	ip32_unknown_interrupt(regs);
 }
 
-void ip32_irq2(struct pt_regs *regs)
+static void ip32_irq2(struct pt_regs *regs)
 {
 	ip32_unknown_interrupt(regs);
 }
 
-void ip32_irq3(struct pt_regs *regs)
+static void ip32_irq3(struct pt_regs *regs)
 {
 	ip32_unknown_interrupt(regs);
 }
 
-void ip32_irq4(struct pt_regs *regs)
+static void ip32_irq4(struct pt_regs *regs)
 {
 	ip32_unknown_interrupt(regs);
 }
 
-void ip32_irq5(struct pt_regs *regs)
+static void ip32_irq5(struct pt_regs *regs)
 {
 	ll_timer_interrupt(IP32_R4K_TIMER_IRQ, regs);
 }
 
+asmlinkage void plat_irq_dispatch(struct pt_regs *regs)
+{
+	unsigned int pending = read_c0_cause();
+
+	if (likely(pending & IE_IRQ0))
+		ip32_irq0(regs);
+	else if (unlikely(pending & IE_IRQ1))
+		ip32_irq1(regs);
+	else if (unlikely(pending & IE_IRQ2))
+		ip32_irq2(regs);
+	else if (unlikely(pending & IE_IRQ3))
+		ip32_irq3(regs);
+	else if (unlikely(pending & IE_IRQ4))
+		ip32_irq4(regs);
+	else if (likely(pending & IE_IRQ5))
+		ip32_irq5(regs);
+}
+
 void __init arch_init_irq(void)
 {
 	unsigned int irq;
@@ -556,7 +573,6 @@ void __init arch_init_irq(void)
 	crime->soft_int = 0;
 	mace->perif.ctrl.istat = 0;
 	mace->perif.ctrl.imask = 0;
-	set_except_vector(0, ip32_handle_int);
 
 	for (irq = 0; irq <= IP32_IRQ_MAX; irq++) {
 		hw_irq_controller *controller;
diff --git a/arch/mips/sibyte/bcm1480/Makefile b/arch/mips/sibyte/bcm1480/Makefile
index 538d5a51ae94..7b36ff3873b7 100644
--- a/arch/mips/sibyte/bcm1480/Makefile
+++ b/arch/mips/sibyte/bcm1480/Makefile
@@ -1,4 +1,4 @@
-obj-y := setup.o irq.o irq_handler.o time.o
+obj-y := setup.o irq.o time.o
 
 obj-$(CONFIG_SMP)			+= smp.o
 
diff --git a/arch/mips/sibyte/bcm1480/irq.c b/arch/mips/sibyte/bcm1480/irq.c
index 9cf7d713b13c..e61760b14d99 100644
--- a/arch/mips/sibyte/bcm1480/irq.c
+++ b/arch/mips/sibyte/bcm1480/irq.c
@@ -187,9 +187,6 @@ static void bcm1480_set_affinity(unsigned int irq, cpumask_t mask)
 #endif
 
 
-/* Defined in arch/mips/sibyte/bcm1480/irq_handler.S */
-extern void bcm1480_irq_handler(void);
-
 /*****************************************************************************/
 
 static unsigned int startup_bcm1480_irq(unsigned int irq)
@@ -422,7 +419,6 @@ void __init arch_init_irq(void)
 #endif
 	/* Enable necessary IPs, disable the rest */
 	change_c0_status(ST0_IM, imask);
-	set_except_vector(0, bcm1480_irq_handler);
 
 #ifdef CONFIG_KGDB
 	if (kgdb_flag) {
@@ -473,3 +469,76 @@ void bcm1480_kgdb_interrupt(struct pt_regs *regs)
 }
 
 #endif 	/* CONFIG_KGDB */
+
+static inline int dclz(unsigned long long x)
+{
+	int lz;
+
+	__asm__ (
+	"	.set	push						\n"
+	"	.set	mips64						\n"
+	"	dclz	%0, %1						\n"
+	"	.set	pop						\n"
+	: "=r" (lz)
+	: "r" (x));
+
+	return lz;
+}
+
+extern void bcm1480_timer_interrupt(struct pt_regs *regs);
+extern void bcm1480_mailbox_interrupt(struct pt_regs *regs);
+extern void bcm1480_kgdb_interrupt(struct pt_regs *regs);
+
+asmlinkage void plat_irq_dispatch(struct pt_regs *regs)
+{
+	unsigned int pending;
+
+#ifdef CONFIG_SIBYTE_BCM1480_PROF
+	/* Set compare to count to silence count/compare timer interrupts */
+	write_c0_compare(read_c0_count());
+#endif
+
+	pending = read_c0_cause();
+
+#ifdef CONFIG_SIBYTE_BCM1480_PROF
+	if (pending & CAUSEF_IP7)	/* Cpu performance counter interrupt */
+		sbprof_cpu_intr(exception_epc(regs));
+#endif
+
+	if (pending & CAUSEF_IP4)
+		bcm1480_timer_interrupt(regs);
+
+#ifdef CONFIG_SMP
+	if (pending & CAUSEF_IP3)
+		bcm1480_mailbox_interrupt(regs);
+#endif
+
+#ifdef CONFIG_KGDB
+	if (pending & CAUSEF_IP6)
+		bcm1480_kgdb_interrupt(regs);		/* KGDB (uart 1) */
+#endif
+
+	if (pending & CAUSEF_IP2) {
+		unsigned long long mask_h, mask_l;
+		unsigned long base;
+
+		/*
+		 * Default...we've hit an IP[2] interrupt, which means we've
+		 * got to check the 1480 interrupt registers to figure out what
+		 * to do.  Need to detect which CPU we're on, now that
+		 * smp_affinity is supported.
+		 */
+		base = A_BCM1480_IMR_MAPPER(smp_processor_id());
+		mask_h = __raw_readq(
+			IOADDR(base + R_BCM1480_IMR_INTERRUPT_STATUS_BASE_H));
+		mask_l = __raw_readq(
+			IOADDR(base + R_BCM1480_IMR_INTERRUPT_STATUS_BASE_L));
+
+		if (!mask_h) {
+			if (mask_h ^ 1)
+				do_IRQ(63 - dclz(mask_h), regs);
+			else
+				do_IRQ(127 - dclz(mask_l), regs);
+		}
+	}
+}
diff --git a/arch/mips/sibyte/bcm1480/irq_handler.S b/arch/mips/sibyte/bcm1480/irq_handler.S
deleted file mode 100644
index 408db88d050f..000000000000
--- a/arch/mips/sibyte/bcm1480/irq_handler.S
+++ /dev/null
@@ -1,165 +0,0 @@
-/*
- * Copyright (C) 2000,2001,2002,2003,2004 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- */
-
-/*
- * bcm1480_irq_handler() is the routine that is actually called when an
- * interrupt occurs.  It is installed as the exception vector handler in
- * init_IRQ() in arch/mips/sibyte/bcm1480/irq.c
- *
- * In the handle we figure out which interrupts need handling, and use that
- * to call the dispatcher, which will take care of actually calling
- * registered handlers
- *
- * Note that we take care of all raised interrupts in one go at the handler.
- * This is more BSDish than the Indy code, and also, IMHO, more sane.
- */
-#include <linux/config.h>
-
-#include <asm/addrspace.h>
-#include <asm/asm.h>
-#include <asm/mipsregs.h>
-#include <asm/regdef.h>
-#include <asm/stackframe.h>
-#include <asm/sibyte/sb1250_defs.h>
-#include <asm/sibyte/bcm1480_regs.h>
-#include <asm/sibyte/bcm1480_int.h>
-
-/*
- * What a pain. We have to be really careful saving the upper 32 bits of any
- * register across function calls if we don't want them trashed--since were
- * running in -o32, the calling routing never saves the full 64 bits of a
- * register across a function call.  Being the interrupt handler, we're
- * guaranteed that interrupts are disabled during this code so we don't have
- * to worry about random interrupts blasting the high 32 bits.
- */
-
-	.text
-	.set	push
-	.set	noreorder
-	.set	noat
-	.set	mips64
-	#.set	mips4
-	.align	5
-	NESTED(bcm1480_irq_handler, PT_SIZE, sp)
-	SAVE_ALL
-	CLI
-
-#ifdef CONFIG_SIBYTE_BCM1480_PROF
-	/* Set compare to count to silence count/compare timer interrupts */
-	mfc0	t1, CP0_COUNT
-	mtc0	t1, CP0_COMPARE /* pause to clear IP[7] bit of cause ? */
-#endif
-	/* Read cause */
-	mfc0	s0, CP0_CAUSE
-
-#ifdef CONFIG_SIBYTE_BCM1480_PROF
-	/* Cpu performance counter interrupt is routed to IP[7] */
-	andi	t1, s0, CAUSEF_IP7
-	beqz	t1, 0f
-	 srl	t1, s0, (CAUSEB_BD-2)	/* Shift BD bit to bit 2 */
-	and	t1, t1, 0x4		/* mask to get just BD bit */
-#ifdef CONFIG_MIPS64
-	dmfc0	a0, CP0_EPC
-	daddu	a0, a0, t1		/* a0 = EPC + (BD ? 4 :	0) */
-#else
-	mfc0	a0, CP0_EPC
-	addu	a0, a0, t1		/* a0 = EPC + (BD ? 4 :	0) */
-#endif
-	jal	sbprof_cpu_intr
-	 nop
-	j	ret_from_irq
-	 nop
-0:
-#endif
-
-	/* Timer interrupt is routed to IP[4] */
-	andi	t1, s0, CAUSEF_IP4
-	beqz	t1, 1f
-	 nop
-	jal	bcm1480_timer_interrupt
-	 move	a0, sp			/* Pass the registers along */
-	j	ret_from_irq
-	 nop				/* delay slot  */
-1:
-
-#ifdef CONFIG_SMP
-	/* Mailbox interrupt is routed to IP[3] */
-	andi	 t1, s0, CAUSEF_IP3
-	beqz	 t1, 2f
-	 nop
-	jal	 bcm1480_mailbox_interrupt
-	 move	 a0, sp
-	j	 ret_from_irq
-	 nop				/* delay slot  */
-2:
-#endif
-
-#ifdef CONFIG_KGDB
-	/* KGDB (uart 1) interrupt is routed to IP[6] */
-	andi	 t1, s0, CAUSEF_IP6
-	beqz	 t1, 3f
-	 nop				/* delay slot  */
-	jal	 bcm1480_kgdb_interrupt
-	 move	 a0, sp
-	j	 ret_from_irq
-	 nop				/* delay slot  */
-3:
-#endif
-
-	and	 t1, s0, CAUSEF_IP2
-	beqz	 t1, 9f
-	 nop
-
-	/*
-	 * Default...we've hit an IP[2] interrupt, which means we've got
-	 * to check the 1480 interrupt registers to figure out what to do
-	 * Need to detect which CPU we're on, now that smp_affinity is
-	 * supported.
-	 */
-	PTR_LA	 v0, CKSEG1 + A_BCM1480_IMR_CPU0_BASE
-#ifdef CONFIG_SMP
-	lw	 t1, TI_CPU($28)
-	sll	 t1, t1, BCM1480_IMR_REGISTER_SPACING_SHIFT
-	addu	 v0, v0, t1
-#endif
-
-	/* Read IP[2] status (get both high and low halves of status) */
-	ld	 s0, R_BCM1480_IMR_INTERRUPT_STATUS_BASE_H(v0)
-	ld	 s1, R_BCM1480_IMR_INTERRUPT_STATUS_BASE_L(v0)
-
-	move	 s2, zero	/* intr number  */
-	li	 s3, 64
-
-	beqz	 s0, 9f		/* No interrupts.  Return.  */
-	 move	 a1, sp
-
-	xori	 s4, s0, 1	/* if s0 (_H) == 1, it's a low intr, so...  */
-	movz	 s2, s3, s4	/* start the intr number at 64, and  */
-	movz	 s0, s1, s4	/* look at the low status value.  */
-
-	dclz	 s1, s0		/* Find the next interrupt.  */
-	dsubu	 a0, zero, s1
-	daddiu	 a0, a0, 63
-	jal	 do_IRQ
-	 daddu	 a0, a0, s2
-
-9:	j	 ret_from_irq
-	 nop
-
-	.set pop
-	END(bcm1480_irq_handler)
diff --git a/arch/mips/sibyte/sb1250/Makefile b/arch/mips/sibyte/sb1250/Makefile
index a8af84697588..a2fdbd62f8ac 100644
--- a/arch/mips/sibyte/sb1250/Makefile
+++ b/arch/mips/sibyte/sb1250/Makefile
@@ -1,4 +1,4 @@
-obj-y := setup.o irq.o irq_handler.o time.o
+obj-y := setup.o irq.o time.o
 
 obj-$(CONFIG_SMP)			+= smp.o
 obj-$(CONFIG_SIBYTE_TBPROF)		+= bcm1250_tbprof.o
diff --git a/arch/mips/sibyte/sb1250/irq.c b/arch/mips/sibyte/sb1250/irq.c
index 589537bfcc3d..0f6e54db4888 100644
--- a/arch/mips/sibyte/sb1250/irq.c
+++ b/arch/mips/sibyte/sb1250/irq.c
@@ -163,10 +163,6 @@ static void sb1250_set_affinity(unsigned int irq, cpumask_t mask)
 }
 #endif
 
-
-/* Defined in arch/mips/sibyte/sb1250/irq_handler.S */
-extern void sb1250_irq_handler(void);
-
 /*****************************************************************************/
 
 static unsigned int startup_sb1250_irq(unsigned int irq)
@@ -379,7 +375,6 @@ void __init arch_init_irq(void)
 #endif
 	/* Enable necessary IPs, disable the rest */
 	change_c0_status(ST0_IM, imask);
-	set_except_vector(0, sb1250_irq_handler);
 
 #ifdef CONFIG_KGDB
 	if (kgdb_flag) {
@@ -409,7 +404,7 @@ void __init arch_init_irq(void)
 #define duart_out(reg, val)     csr_out32(val, IOADDR(A_DUART_CHANREG(kgdb_port,reg)))
 #define duart_in(reg)           csr_in32(IOADDR(A_DUART_CHANREG(kgdb_port,reg)))
 
-void sb1250_kgdb_interrupt(struct pt_regs *regs)
+static void sb1250_kgdb_interrupt(struct pt_regs *regs)
 {
 	/*
 	 * Clear break-change status (allow some time for the remote
@@ -424,3 +419,74 @@ void sb1250_kgdb_interrupt(struct pt_regs *regs)
 }
 
 #endif 	/* CONFIG_KGDB */
+
+static inline int dclz(unsigned long long x)
+{
+	int lz;
+
+	__asm__ (
+	"	.set	push						\n"
+	"	.set	mips64						\n"
+	"	dclz	%0, %1						\n"
+	"	.set	pop						\n"
+	: "=r" (lz)
+	: "r" (x));
+
+	return lz;
+}
+
+asmlinkage void plat_irq_dispatch(struct pt_regs *regs)
+{
+	unsigned int pending;
+
+#ifdef CONFIG_SIBYTE_SB1250_PROF
+	/* Set compare to count to silence count/compare timer interrupts */
+	write_c0_count(read_c0_count());
+#endif
+
+	/*
+	 * What a pain. We have to be really careful saving the upper 32 bits
+	 * of any * register across function calls if we don't want them
+	 * trashed--since were running in -o32, the calling routing never saves
+	 * the full 64 bits of a register across a function call.  Being the
+	 * interrupt handler, we're guaranteed that interrupts are disabled
+	 * during this code so we don't have to worry about random interrupts
+	 * blasting the high 32 bits.
+	 */
+
+	pending = read_c0_cause();
+
+#ifdef CONFIG_SIBYTE_SB1250_PROF
+	if (pending & CAUSEF_IP7) { /* Cpu performance counter interrupt */
+		sbprof_cpu_intr(exception_epc(regs));
+	}
+#endif
+
+	if (pending & CAUSEF_IP4)
+		sb1250_timer_interrupt(regs);
+
+#ifdef CONFIG_SMP
+	if (pending & CAUSEF_IP3)
+		sb1250_mailbox_interrupt(regs);
+#endif
+
+#ifdef CONFIG_KGDB
+	if (pending & CAUSEF_IP6)			/* KGDB (uart 1) */
+		sb1250_kgdb_interrupt(regs);
+#endif
+
+	if (pending & CAUSEF_IP2) {
+		unsigned long long mask;
+
+		/*
+		 * Default...we've hit an IP[2] interrupt, which means we've
+		 * got to check the 1250 interrupt registers to figure out what
+		 * to do.  Need to detect which CPU we're on, now that
+		 ~ smp_affinity is supported.
+		 */
+		mask = __raw_readq(IOADDR(A_IMR_REGISTER(smp_processor_id(),
+		                              R_IMR_INTERRUPT_STATUS_BASE)));
+		if (mask)
+			do_IRQ(63 - dclz(mask), regs);
+	}
+}
diff --git a/arch/mips/sibyte/sb1250/irq_handler.S b/arch/mips/sibyte/sb1250/irq_handler.S
deleted file mode 100644
index 60edc8fb302b..000000000000
--- a/arch/mips/sibyte/sb1250/irq_handler.S
+++ /dev/null
@@ -1,147 +0,0 @@
-/*
- * Copyright (C) 2000, 2001, 2002, 2003 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- */
-
-/*
- * sb1250_handle_int() is the routine that is actually called when an interrupt
- * occurs.  It is installed as the exception vector handler in arch_init_irq()
- * in arch/mips/sibyte/sb1250/irq.c
- *
- * In the handle we figure out which interrupts need handling, and use that to
- * call the dispatcher, which will take care of actually calling registered
- * handlers
- *
- * Note that we take care of all raised interrupts in one go at the handler.
- * This is more BSDish than the Indy code, and also, IMHO, more sane.
- */
-#include <linux/config.h>
-
-#include <asm/addrspace.h>
-#include <asm/asm.h>
-#include <asm/mipsregs.h>
-#include <asm/regdef.h>
-#include <asm/stackframe.h>
-#include <asm/sibyte/sb1250_defs.h>
-#include <asm/sibyte/sb1250_regs.h>
-#include <asm/sibyte/sb1250_int.h>
-
-/*
- * What a pain. We have to be really careful saving the upper 32 bits of any
- * register across function calls if we don't want them trashed--since were
- * running in -o32, the calling routing never saves the full 64 bits of a
- * register across a function call.  Being the interrupt handler, we're
- * guaranteed that interrupts are disabled during this code so we don't have
- * to worry about random interrupts blasting the high 32 bits.
- */
-
-	.text
-	.set	push
-	.set	noreorder
-	.set	noat
-	.set	mips64
-	.align	5
-	NESTED(sb1250_irq_handler, PT_SIZE, sp)
-	SAVE_ALL
-	CLI
-
-#ifdef CONFIG_SIBYTE_SB1250_PROF
-	/* Set compare to count to silence count/compare timer interrupts */
-	mfc0	t1, CP0_COUNT
-	mtc0	t1, CP0_COMPARE /* pause to clear IP[7] bit of cause ? */
-#endif
-	/* Read cause */
-	mfc0	s0, CP0_CAUSE
-
-#ifdef CONFIG_SIBYTE_SB1250_PROF
-	/* Cpu performance counter interrupt is routed to IP[7] */
-	andi	t1, s0, CAUSEF_IP7
-	beqz	t1, 0f
-	 srl	t1, s0, (CAUSEB_BD-2)  /* Shift BD bit to bit 2 */
-	and	t1, t1, 0x4		/* mask to get just BD bit */
-	mfc0	a0, CP0_EPC
-	jal	sbprof_cpu_intr
-	 addu	a0, a0, t1		/* a0 = EPC + (BD ? 4 :	0) */
-	j	ret_from_irq
-	 nop
-0:
-#endif
-
-	/* Timer interrupt is routed to IP[4] */
-	andi	t1, s0, CAUSEF_IP4
-	beqz	t1, 1f
-	 nop
-	jal	sb1250_timer_interrupt
-	 move	a0, sp			/* Pass the registers along */
-	j	ret_from_irq
-	 nop				# delay slot
-1:
-
-#ifdef CONFIG_SMP
-	/* Mailbox interrupt is routed to IP[3] */
-	andi	 t1, s0, CAUSEF_IP3
-	beqz	 t1, 2f
-	 nop
-	jal	 sb1250_mailbox_interrupt
-	 move    a0, sp
-	j	ret_from_irq
-	 nop				# delay slot
-2:
-#endif
-
-#ifdef CONFIG_KGDB
-	/* KGDB (uart 1) interrupt is routed to IP[6] */
-	andi	t1, s0, CAUSEF_IP6
-	beqz	t1, 1f
-	nop                            # delay slot
-	jal	sb1250_kgdb_interrupt
-         move	a0, sp
-	j	ret_from_irq
-	nop                            # delay slot
-1:
-#endif
-
-	and      t1, s0, CAUSEF_IP2
-	beqz     t1, 4f
-	 nop
-
-	/*
-	 * Default...we've hit an IP[2] interrupt, which means we've got to
-	 * check the 1250 interrupt registers to figure out what to do
-	 * Need to detect which CPU we're on, now that smp_affinity is supported.
-	 */
-	PTR_LA	v0, CKSEG1 + A_IMR_CPU0_BASE
-#ifdef CONFIG_SMP
-	lw	t1, TI_CPU($28)
-	sll	t1, IMR_REGISTER_SPACING_SHIFT
-	addu	v0, t1
-#endif
-	ld	s0, R_IMR_INTERRUPT_STATUS_BASE(v0)	/* read IP[2] status */
-
-	beqz	s0, 4f		/* No interrupts.  Return */
-	 move	a1, sp
-
-3:	dclz	s1, s0		/* Find the next interrupt */
-	dsubu	a0, zero, s1
-	daddiu	a0, a0, 63
-	jal	 do_IRQ
-	 nop
-
-4:	j        ret_from_irq
-	 nop
-
-	.set pop
-	END(sb1250_irq_handler)
diff --git a/arch/mips/sni/Makefile b/arch/mips/sni/Makefile
index 1e5676e4be86..9c7eaa5fb210 100644
--- a/arch/mips/sni/Makefile
+++ b/arch/mips/sni/Makefile
@@ -2,6 +2,6 @@
 # Makefile for the SNI specific part of the kernel
 #
 
-obj-y	 	+= int-handler.o irq.o pcimt_scache.o reset.o setup.o
+obj-y	 	+= irq.o pcimt_scache.o reset.o setup.o
 
 EXTRA_AFLAGS := $(CFLAGS)
diff --git a/arch/mips/sni/int-handler.S b/arch/mips/sni/int-handler.S
deleted file mode 100644
index 2cdc09f55f18..000000000000
--- a/arch/mips/sni/int-handler.S
+++ /dev/null
@@ -1,106 +0,0 @@
-/*
- * SNI RM200 PCI specific interrupt handler code.
- *
- * Copyright (C) 1994, 95, 96, 97, 98, 1999, 2000, 01 by Ralf Baechle
- */
-#include <asm/asm.h>
-#include <asm/mipsregs.h>
-#include <asm/regdef.h>
-#include <asm/sni.h>
-#include <asm/stackframe.h>
-
-/*
- * The PCI ASIC has the nasty property that it may delay writes if it is busy.
- * As a consequence from writes that have not graduated when we exit from the
- * interrupt handler we might catch a spurious interrupt.  To avoid this we
- * force the PCI ASIC to graduate all writes by executing a read from the
- * PCI bus.
- */
-		.set	noreorder
-		.set	noat
-		.align	5
-		NESTED(sni_rm200_pci_handle_int, PT_SIZE, sp)
-		SAVE_ALL
-		CLI
-		.set	at
-
-		/* Blinken light ...  */
-		lb	t0, led_cache
-		addiu	t0, 1
-		sb	t0, led_cache
-		sb	t0, PCIMT_CSLED			# write only register
-		.data
-led_cache:	.byte	0
-		.text
-
-		mfc0	t0, CP0_STATUS
-		mfc0	t1, CP0_CAUSE
-		and	t0, t1
-
-		 andi	t1, t0, 0x0800			# hardware interrupt 1
-		bnez	t1, _hwint1
-		 andi	t1, t0, 0x4000			# hardware interrupt 4
-		bnez	t1, _hwint4
-		 andi	t1, t0, 0x2000			# hardware interrupt 3
-		bnez	t1, _hwint3
-		 andi	t1, t0, 0x1000			# hardware interrupt 2
-		bnez	t1, _hwint2
-		 andi	t1, t0, 0x8000			# hardware interrupt 5
-		bnez	t1, _hwint5
-		 andi	t1, t0, 0x0400			# hardware interrupt 0
-		bnez	t1, _hwint0
-		 nop
-
-		j	restore_all			# spurious interrupt
-		 nop
-
- ##############################################################################
-
-/* hwint0 should deal with MP agent, ASIC PCI, EISA NMI and debug
-   button interrupts.  */
-_hwint0:	jal	pciasic_hwint0
-		 move	a0, sp
-		j	ret_from_irq
-		 nop
-
-/*
- * hwint 1 deals with EISA and SCSI interrupts
- */
-_hwint1:	jal	pciasic_hwint1
-		 move	a0, sp
-		j	ret_from_irq
-		 nop
-
-
-/*
- * This interrupt was used for the com1 console on the first prototypes;
- * it's unsed otherwise
- */
-_hwint2:	jal	pciasic_hwint2
-		 move	a0, sp
-		j	ret_from_irq
-		 nop
-
-/*
- * hwint 3 are the PCI interrupts A - D
- */
-_hwint3:	jal	pciasic_hwint3
-		 move	a0, sp
-		j	ret_from_irq
-		 nop
-
-/*
- * hwint 4 is used for only the onboard PCnet 32.
- */
-_hwint4:	jal	pciasic_hwint4
-		 move	a0, sp
-		j	ret_from_irq
-		 nop
-
-/* hwint5 is the r4k count / compare interrupt  */
-_hwint5:	jal	pciasic_hwint5
-		 move	a0, sp
-		j	ret_from_irq
-		 nop
-
-		END(sni_rm200_pci_handle_int)
diff --git a/arch/mips/sni/irq.c b/arch/mips/sni/irq.c
index 952038aa4b90..7365b4853ddb 100644
--- a/arch/mips/sni/irq.c
+++ b/arch/mips/sni/irq.c
@@ -19,8 +19,6 @@
 
 DEFINE_SPINLOCK(pciasic_lock);
 
-extern asmlinkage void sni_rm200_pci_handle_int(void);
-
 static void enable_pciasic_irq(unsigned int irq)
 {
 	unsigned int mask = 1 << (irq - PCIMT_IRQ_INT2);
@@ -71,20 +69,20 @@ static struct hw_interrupt_type pciasic_irq_type = {
  * hwint0 should deal with MP agent, ASIC PCI, EISA NMI and debug
  * button interrupts.  Later ...
  */
-void pciasic_hwint0(struct pt_regs *regs)
+static void pciasic_hwint0(struct pt_regs *regs)
 {
 	panic("Received int0 but no handler yet ...");
 }
 
 /* This interrupt was used for the com1 console on the first prototypes.  */
-void pciasic_hwint2(struct pt_regs *regs)
+static void pciasic_hwint2(struct pt_regs *regs)
 {
 	/* I think this shouldn't happen on production machines.  */
 	panic("hwint2 and no handler yet");
 }
 
 /* hwint5 is the r4k count / compare interrupt  */
-void pciasic_hwint5(struct pt_regs *regs)
+static void pciasic_hwint5(struct pt_regs *regs)
 {
 	panic("hwint5 and no handler yet");
 }
@@ -105,7 +103,7 @@ static unsigned int ls1bit8(unsigned int x)
  *
  * The EISA_INT bit in CSITPEND is high active, all others are low active.
  */
-void pciasic_hwint1(struct pt_regs *regs)
+static void pciasic_hwint1(struct pt_regs *regs)
 {
 	u8 pend = *(volatile char *)PCIMT_CSITPEND;
 	unsigned long flags;
@@ -135,7 +133,7 @@ void pciasic_hwint1(struct pt_regs *regs)
 /*
  * hwint 3 should deal with the PCI A - D interrupts,
  */
-void pciasic_hwint3(struct pt_regs *regs)
+static void pciasic_hwint3(struct pt_regs *regs)
 {
 	u8 pend = *(volatile char *)PCIMT_CSITPEND;
 	int irq;
@@ -150,13 +148,34 @@ void pciasic_hwint3(struct pt_regs *regs)
 /*
  * hwint 4 is used for only the onboard PCnet 32.
  */
-void pciasic_hwint4(struct pt_regs *regs)
+static void pciasic_hwint4(struct pt_regs *regs)
 {
 	clear_c0_status(IE_IRQ4);
 	do_IRQ(PCIMT_IRQ_ETHERNET, regs);
 	set_c0_status(IE_IRQ4);
 }
 
+asmlinkage void plat_irq_dispatch(struct pt_regs *regs)
+{
+	unsigned int pending = read_c0_status() & read_c0_cause();
+	static unsigned char led_cache;
+
+	*(volatile unsigned char *) PCIMT_CSLED = ++led_cache;
+
+	if (pending & 0x0800)
+		pciasic_hwint1(regs);
+	else if (pending & 0x4000)
+		pciasic_hwint4(regs);
+	else if (pending & 0x2000)
+		pciasic_hwint3(regs);
+	else if (pending & 0x1000)
+		pciasic_hwint2(regs);
+	else if (pending & 0x8000)
+		pciasic_hwint5(regs);
+	else if (pending & 0x0400)
+		pciasic_hwint0(regs);
+}
+
 void __init init_pciasic(void)
 {
 	unsigned long flags;
@@ -176,8 +195,6 @@ void __init arch_init_irq(void)
 {
 	int i;
 
-	set_except_vector(0, sni_rm200_pci_handle_int);
-
 	init_i8259_irqs();			/* Integrated i8259  */
 	init_pciasic();
 
diff --git a/arch/mips/tx4927/common/Makefile b/arch/mips/tx4927/common/Makefile
index 8fa126b296e1..9cb9535ebacb 100644
--- a/arch/mips/tx4927/common/Makefile
+++ b/arch/mips/tx4927/common/Makefile
@@ -6,7 +6,7 @@
 # unless it's something special (ie not a .c file).
 #
 
-obj-y	+= tx4927_prom.o tx4927_setup.o tx4927_irq.o tx4927_irq_handler.o
+obj-y	+= tx4927_prom.o tx4927_setup.o tx4927_irq.o
 
 obj-$(CONFIG_TOSHIBA_FPCIB0)	   += smsc_fdc37m81x.o
 obj-$(CONFIG_KGDB)                 += tx4927_dbgio.o
diff --git a/arch/mips/tx4927/common/tx4927_irq.c b/arch/mips/tx4927/common/tx4927_irq.c
index 5ab2e2b76018..8ca68015cf40 100644
--- a/arch/mips/tx4927/common/tx4927_irq.c
+++ b/arch/mips/tx4927/common/tx4927_irq.c
@@ -525,8 +525,6 @@ static void tx4927_irq_pic_end(unsigned int irq)
  */
 void __init tx4927_irq_init(void)
 {
-	extern asmlinkage void tx4927_irq_handler(void);
-
 	TX4927_IRQ_DPRINTK(TX4927_IRQ_INIT, "-\n");
 
 	TX4927_IRQ_DPRINTK(TX4927_IRQ_INIT, "=Calling tx4927_irq_cp0_init()\n");
@@ -535,16 +533,12 @@ void __init tx4927_irq_init(void)
 	TX4927_IRQ_DPRINTK(TX4927_IRQ_INIT, "=Calling tx4927_irq_pic_init()\n");
 	tx4927_irq_pic_init();
 
-	TX4927_IRQ_DPRINTK(TX4927_IRQ_INIT,
-			   "=Calling set_except_vector(tx4927_irq_handler)\n");
-	set_except_vector(0, tx4927_irq_handler);
-
 	TX4927_IRQ_DPRINTK(TX4927_IRQ_INIT, "+\n");
 
 	return;
 }
 
-int tx4927_irq_nested(void)
+static int tx4927_irq_nested(void)
 {
 	int sw_irq = 0;
 	u32 level2;
@@ -582,3 +576,25 @@ int tx4927_irq_nested(void)
 
 	return (sw_irq);
 }
+
+asmlinkage void plat_irq_dispatch(struct pt_regs *regs)
+{
+	unsigned int pending = read_c0_status() & read_c0_cause();
+
+	if (pending & STATUSF_IP7)			/* cpu timer */
+		do_IRQ(TX4927_IRQ_CPU_TIMER, regs);
+	else if (pending & STATUSF_IP2) {		/* tx4927 pic */
+		unsigned int irq = tx4927_irq_nested();
+
+		if (unlikely(irq == 0)) {
+			spurious_interrupt(regs);
+			return;
+		}
+		do_IRQ(irq, regs);
+	} else if (pending & STATUSF_IP0)		/* user line 0 */
+		do_IRQ(TX4927_IRQ_USER0, regs);
+	else if (pending & STATUSF_IP1)			/* user line 1 */
+		do_IRQ(TX4927_IRQ_USER1, regs);
+	else
+		spurious_interrupt(regs);
+}
diff --git a/arch/mips/tx4927/common/tx4927_irq_handler.S b/arch/mips/tx4927/common/tx4927_irq_handler.S
deleted file mode 100644
index dd3ceda9d712..000000000000
--- a/arch/mips/tx4927/common/tx4927_irq_handler.S
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
- * linux/arch/mips/tx4927/common/tx4927_irq_handler.S
- *
- * Primary interrupt handler for tx4927 based systems
- *
- * Author: MontaVista Software, Inc.
- * Author: jsun@mvista.com or jsun@junsun.net
- *         source@mvista.com
- *
- * Copyright 2001-2002 MontaVista Software Inc.
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License as published by the
- *  Free Software Foundation; either version 2 of the License, or (at your
- *  option) any later version.
- *
- *  THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- *  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
- *  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- *  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- *  OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- *  ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
- *  TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
- *  USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#include <asm/asm.h>
-#include <asm/mipsregs.h>
-#include <asm/addrspace.h>
-#include <asm/regdef.h>
-#include <asm/stackframe.h>
-#include <asm/tx4927/tx4927.h>
-
-		.align	5
-		NESTED(tx4927_irq_handler, PT_SIZE, sp)
-		SAVE_ALL
-		CLI
-		.set	at
-
-		mfc0	t0, CP0_CAUSE
-		mfc0	t1, CP0_STATUS
-		and	t0, t1
-
-		andi	t1, t0, STATUSF_IP7	/* cpu timer */
-		bnez	t1, ll_ip7
-
-		/* IP6..IP3 multiplexed -- do not use */
-
-		andi	t1, t0, STATUSF_IP2	/* tx4927 pic */
-		bnez	t1, ll_ip2
-
-		andi	t1, t0, STATUSF_IP0	/* user line 0 */
-		bnez	t1, ll_ip0
-
-		andi	t1, t0, STATUSF_IP1	/* user line 1 */
-		bnez	t1, ll_ip1
-
-		.set	reorder
-
-		/* wrong alarm or masked ... */
-		j	spurious_interrupt
-		nop
-		END(tx4927_irq_handler)
-
-		.align	5
-
-
-ll_ip7:
-		li	a0, TX4927_IRQ_CPU_TIMER
-		move	a1, sp
-		jal	do_IRQ
-		j	ret_from_irq
-
-ll_ip2:
-		jal	tx4927_irq_nested
-		nop
-		beqz 	v0, goto_spurious_interrupt
-		nop
-		move	a0, v0
-		move	a1, sp
-		jal	do_IRQ
-		j	ret_from_irq
-
-goto_spurious_interrupt:
-	j spurious_interrupt
-	nop
-
-ll_ip1:
-		li	a0, TX4927_IRQ_USER1
-		move	a1, sp
-		jal	do_IRQ
-		j	ret_from_irq
-
-ll_ip0:
-		li	a0, TX4927_IRQ_USER0
-		move	a1, sp
-		jal	do_IRQ
-		j	ret_from_irq
diff --git a/arch/mips/tx4938/common/Makefile b/arch/mips/tx4938/common/Makefile
index 74c95c5bcdbf..2033ae77f632 100644
--- a/arch/mips/tx4938/common/Makefile
+++ b/arch/mips/tx4938/common/Makefile
@@ -6,6 +6,6 @@
 # unless it's something special (ie not a .c file).
 #
 
-obj-y	+= prom.o setup.o irq.o irq_handler.o rtc_rx5c348.o
+obj-y	+= prom.o setup.o irq.o rtc_rx5c348.o
 obj-$(CONFIG_KGDB) += dbgio.o
 
diff --git a/arch/mips/tx4938/common/irq.c b/arch/mips/tx4938/common/irq.c
index 4f90d7faf634..873805178d8e 100644
--- a/arch/mips/tx4938/common/irq.c
+++ b/arch/mips/tx4938/common/irq.c
@@ -392,11 +392,8 @@ tx4938_irq_pic_end(unsigned int irq)
 void __init
 tx4938_irq_init(void)
 {
-	extern asmlinkage void tx4938_irq_handler(void);
-
 	tx4938_irq_cp0_init();
 	tx4938_irq_pic_init();
-	set_except_vector(0, tx4938_irq_handler);
 
 	return;
 }
@@ -422,3 +419,21 @@ tx4938_irq_nested(void)
 	wbflush();
 	return (sw_irq);
 }
+
+asmlinkage void plat_irq_dispatch(struct pt_regs *regs)
+{
+	unsigned int pending = read_c0_cause() & read_c0_status();
+
+	if (pending & STATUSF_IP7)
+		do_IRQ(TX4938_IRQ_CPU_TIMER, regs);
+	else if (pending & STATUSF_IP2) {
+		int irq = tx4938_irq_nested();
+		if (irq)
+			do_IRQ(irq, regs);
+		else
+			spurious_interrupt(regs);
+	} else if (pending & STATUSF_IP1)
+		do_IRQ(TX4938_IRQ_USER1, regs);
+	else if (pending & STATUSF_IP0)
+		do_IRQ(TX4938_IRQ_USER0, regs);
+}
diff --git a/arch/mips/tx4938/common/irq_handler.S b/arch/mips/tx4938/common/irq_handler.S
deleted file mode 100644
index 1b2f72bac42d..000000000000
--- a/arch/mips/tx4938/common/irq_handler.S
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
- * linux/arch/mips/tx4938/common/handler.S
- *
- * Primary interrupt handler for tx4938 based systems
- * Copyright (C) 2000-2001 Toshiba Corporation
- *
- * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
- * terms of the GNU General Public License version 2. This program is
- * licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
- */
-#include <asm/asm.h>
-#include <asm/mipsregs.h>
-#include <asm/addrspace.h>
-#include <asm/regdef.h>
-#include <asm/stackframe.h>
-#include <asm/tx4938/rbtx4938.h>
-
-
-		.align	5
-		NESTED(tx4938_irq_handler, PT_SIZE, sp)
-		SAVE_ALL
-		CLI
-		.set	at
-
-		mfc0	t0, CP0_CAUSE
-		mfc0	t1, CP0_STATUS
-		and	t0, t1
-
-		andi	t1, t0, STATUSF_IP7	/* cpu timer */
-		bnez	t1, ll_ip7
-
-		/* IP6..IP3 multiplexed -- do not use */
-
-		andi	t1, t0, STATUSF_IP2	/* tx4938 pic */
-		bnez	t1, ll_ip2
-
-		andi	t1, t0, STATUSF_IP1	/* user line 1 */
-		bnez	t1, ll_ip1
-
-		andi	t1, t0, STATUSF_IP0	/* user line 0 */
-		bnez	t1, ll_ip0
-
-		.set	reorder
-
-		nop
-		END(tx4938_irq_handler)
-
-		.align	5
-
-
-ll_ip7:
-		li	a0, TX4938_IRQ_CPU_TIMER
-		move	a1, sp
-		jal	do_IRQ
-		j	ret_from_irq
-
-
-ll_ip2:
-		jal	tx4938_irq_nested
-		nop
-		beqz	v0, goto_spurious_interrupt
-		nop
-		move	a0, v0
-		move	a1, sp
-		jal	do_IRQ
-		j	ret_from_irq
-
-goto_spurious_interrupt:
-		j	ret_from_irq
-
-ll_ip1:
-		li	a0, TX4938_IRQ_USER1
-		move	a1, sp
-		jal	do_IRQ
-		j	ret_from_irq
-
-ll_ip0:
-		li	a0, TX4938_IRQ_USER0
-		move	a1, sp
-		jal	do_IRQ
-		j	ret_from_irq
diff --git a/arch/mips/vr41xx/Kconfig b/arch/mips/vr41xx/Kconfig
index a7add16c9aa4..055a2cdfc841 100644
--- a/arch/mips/vr41xx/Kconfig
+++ b/arch/mips/vr41xx/Kconfig
@@ -4,6 +4,8 @@ config CASIO_E55
 	select DMA_NONCOHERENT
 	select IRQ_CPU
 	select ISA
+	select SYS_HAS_CPU_VR41XX
+	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 
 config IBM_WORKPAD
@@ -12,6 +14,8 @@ config IBM_WORKPAD
 	select DMA_NONCOHERENT
 	select IRQ_CPU
 	select ISA
+	select SYS_HAS_CPU_VR41XX
+	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 
 config NEC_CMBVR4133
@@ -21,6 +25,9 @@ config NEC_CMBVR4133
 	select DMA_NONCOHERENT
 	select IRQ_CPU
 	select HW_HAS_PCI
+	select SYS_HAS_CPU_VR41XX
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_LITTLE_ENDIAN
 
 config ROCKHOPPER
 	bool "Support for Rockhopper baseboard"
@@ -34,6 +41,8 @@ config TANBAC_TB022X
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
 	select IRQ_CPU
+	select SYS_HAS_CPU_VR41XX
+	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	help
 	  The TANBAC VR4131 multichip module(TB0225) and
@@ -65,6 +74,8 @@ config VICTOR_MPC30X
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
 	select IRQ_CPU
+	select SYS_HAS_CPU_VR41XX
+	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 
 config ZAO_CAPCELLA
@@ -73,6 +84,8 @@ config ZAO_CAPCELLA
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
 	select IRQ_CPU
+	select SYS_HAS_CPU_VR41XX
+	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 
 config PCI_VR41XX
diff --git a/arch/mips/vr41xx/common/Makefile b/arch/mips/vr41xx/common/Makefile
index 9096302a7ecc..aa373974c80f 100644
--- a/arch/mips/vr41xx/common/Makefile
+++ b/arch/mips/vr41xx/common/Makefile
@@ -2,7 +2,7 @@
 # Makefile for common code of the NEC VR4100 series.
 #
 
-obj-y				+= bcu.o cmu.o icu.o init.o int-handler.o irq.o pmu.o type.o
+obj-y				+= bcu.o cmu.o icu.o init.o irq.o pmu.o type.o
 obj-$(CONFIG_VRC4173)		+= vrc4173.o
 
 EXTRA_AFLAGS := $(CFLAGS)
diff --git a/arch/mips/vr41xx/common/int-handler.S b/arch/mips/vr41xx/common/int-handler.S
deleted file mode 100644
index 2b6043f16d09..000000000000
--- a/arch/mips/vr41xx/common/int-handler.S
+++ /dev/null
@@ -1,114 +0,0 @@
-/*
- * FILE NAME
- *	arch/mips/vr41xx/common/int-handler.S
- *
- * BRIEF MODULE DESCRIPTION
- *	Interrupt dispatcher for the NEC VR4100 series.
- *
- * Author: Yoichi Yuasa
- *         yyuasa@mvista.com or source@mvista.com
- *
- * Copyright 2001 MontaVista Software Inc.
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License as published by the
- *  Free Software Foundation; either version 2 of the License, or (at your
- *  option) any later version.
- *
- *  THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- *  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
- *  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- *  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- *  OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- *  ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
- *  TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
- *  USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-/*
- * Changes:
- *  MontaVista Software Inc. <yyuasa@mvista.com> or <source@mvista.com>
- *  - New creation, NEC VR4100 series are supported.
- *
- *  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
- *  - Coped with INTASSIGN of NEC VR4133.
- */
-#include <asm/asm.h>
-#include <asm/regdef.h>
-#include <asm/mipsregs.h>
-#include <asm/stackframe.h>
-
-		.text
-		.set	noreorder
-
-		.align	5
-		NESTED(vr41xx_handle_interrupt, PT_SIZE, ra)
-		.set	noat
-		SAVE_ALL
-		CLI
-		.set	at
-		.set	noreorder
-
-		/*
-		 * Get the pending interrupts
-		 */
-		mfc0	t0, CP0_CAUSE
-		mfc0	t1, CP0_STATUS
-		andi	t0, 0xff00
-		and	t0, t0, t1
-
-		andi	t1, t0, CAUSEF_IP7	# MIPS timer interrupt
-		bnez	t1, handle_irq
-		li	a0, 7
-
-		andi	t1, t0, 0x7800		# check for Int1-4
-		beqz	t1, 1f
-
-		andi	t1, t0, CAUSEF_IP3	# check for Int1
-		bnez	t1, handle_int
-		li	a0, 3
-
-		andi	t1, t0, CAUSEF_IP4	# check for Int2
-		bnez	t1, handle_int
-		li	a0, 4
-
-		andi	t1, t0, CAUSEF_IP5	# check for Int3
-		bnez	t1, handle_int
-		li	a0, 5
-
-		andi	t1, t0, CAUSEF_IP6	# check for Int4
-		bnez	t1, handle_int
-		li	a0, 6
-
-1:
-		andi	t1, t0, CAUSEF_IP2	# check for Int0
-		bnez	t1, handle_int
-		li	a0, 2
-
-		andi	t1, t0, CAUSEF_IP0	# check for IP0
-		bnez	t1, handle_irq
-		li	a0, 0
-
-		andi	t1, t0, CAUSEF_IP1	# check for IP1
-		bnez	t1, handle_irq
-		li	a0, 1
-
-		j	spurious_interrupt
-		nop
-
-handle_int:
-		jal	irq_dispatch
-		move	a1, sp
-		j	ret_from_irq
-		nop
-
-handle_irq:
-		jal	do_IRQ
-		move	a1, sp
-		j	ret_from_irq
-		END(vr41xx_handle_interrupt)
diff --git a/arch/mips/vr41xx/common/irq.c b/arch/mips/vr41xx/common/irq.c
index 61aa264275ff..86796bb63c3c 100644
--- a/arch/mips/vr41xx/common/irq.c
+++ b/arch/mips/vr41xx/common/irq.c
@@ -59,7 +59,7 @@ int cascade_irq(unsigned int irq, int (*get_irq)(unsigned int, struct pt_regs *)
 
 EXPORT_SYMBOL_GPL(cascade_irq);
 
-asmlinkage void irq_dispatch(unsigned int irq, struct pt_regs *regs)
+static void irq_dispatch(unsigned int irq, struct pt_regs *regs)
 {
 	irq_cascade_t *cascade;
 	irq_desc_t *desc;
@@ -84,11 +84,32 @@ asmlinkage void irq_dispatch(unsigned int irq, struct pt_regs *regs)
 		do_IRQ(irq, regs);
 }
 
-extern asmlinkage void vr41xx_handle_interrupt(void);
+asmlinkage void plat_irq_dispatch(struct pt_regs *regs)
+{
+	unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM;
+
+	if (pending & CAUSEF_IP7)
+		do_IRQ(7, regs);
+	else if (pending & 0x7800) {
+		if (pending & CAUSEF_IP3)
+			irq_dispatch(3, regs);
+		else if (pending & CAUSEF_IP4)
+			irq_dispatch(4, regs);
+		else if (pending & CAUSEF_IP5)
+			irq_dispatch(5, regs);
+		else if (pending & CAUSEF_IP6)
+			irq_dispatch(6, regs);
+	} else if (pending & CAUSEF_IP2)
+		irq_dispatch(2, regs);
+	else if (pending & CAUSEF_IP0)
+		do_IRQ(0, regs);
+	else if (pending & CAUSEF_IP1)
+		do_IRQ(1, regs);
+	else
+		spurious_interrupt(regs);
+}
 
 void __init arch_init_irq(void)
 {
 	mips_cpu_irq_init(MIPS_CPU_IRQ_BASE);
-
-	set_except_vector(0, vr41xx_handle_interrupt);
 }
diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig
index 19f911c5dd58..910fb3afc0b5 100644
--- a/arch/parisc/Kconfig
+++ b/arch/parisc/Kconfig
@@ -138,6 +138,37 @@ config 64BIT
 	  enable this option otherwise. The 64bit kernel is significantly bigger
 	  and slower than the 32bit one.
 
+choice
+	prompt "Kernel page size"
+	default PARISC_PAGE_SIZE_4KB  if !64BIT
+	default PARISC_PAGE_SIZE_4KB  if 64BIT
+#	default PARISC_PAGE_SIZE_16KB if 64BIT
+
+config PARISC_PAGE_SIZE_4KB
+	bool "4KB"
+	help
+	  This lets you select the page size of the kernel.  For best
+	  performance, a page size of 16KB is recommended.  For best
+	  compatibility with 32bit applications, a page size of 4KB should be
+	  selected (the vast majority of 32bit binaries work perfectly fine
+	  with a larger page size).
+
+	  4KB                For best 32bit compatibility
+	  16KB               For best performance
+	  64KB               For best performance, might give more overhead.
+
+	  If you don't know what to do, choose 4KB.
+
+config PARISC_PAGE_SIZE_16KB
+	bool "16KB (EXPERIMENTAL)"
+	depends on PA8X00 && EXPERIMENTAL
+
+config PARISC_PAGE_SIZE_64KB
+	bool "64KB (EXPERIMENTAL)"
+	depends on PA8X00 && EXPERIMENTAL
+
+endchoice
+
 config SMP
 	bool "Symmetric multi-processing support"
 	---help---
diff --git a/arch/parisc/defconfig b/arch/parisc/defconfig
index 59f7bc38e72e..b38b58eb9dc2 100644
--- a/arch/parisc/defconfig
+++ b/arch/parisc/defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16-pa6
-# Sun Mar 26 19:50:07 2006
+# Linux kernel version: 2.6.16-pa10
+# Sun Apr  2 15:26:38 2006
 #
 CONFIG_PARISC=y
 CONFIG_MMU=y
@@ -25,7 +25,7 @@ CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
+CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
@@ -35,7 +35,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -57,7 +57,13 @@ CONFIG_BASE_SMALL=0
 #
 # Loadable module support
 #
-# CONFIG_MODULES is not set
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
 
 #
 # Block layer
@@ -79,16 +85,19 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 #
 # Processor type and features
 #
-CONFIG_PA7000=y
-# CONFIG_PA7100LC is not set
+# CONFIG_PA7000 is not set
+CONFIG_PA7100LC=y
 # CONFIG_PA7200 is not set
 # CONFIG_PA7300LC is not set
 # CONFIG_PA8X00 is not set
 CONFIG_PA11=y
+CONFIG_PARISC_PAGE_SIZE_4KB=y
+# CONFIG_PARISC_PAGE_SIZE_16KB is not set
+# CONFIG_PARISC_PAGE_SIZE_64KB is not set
 # CONFIG_SMP is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_PREEMPT is not set
 # CONFIG_HZ_100 is not set
 CONFIG_HZ_250=y
@@ -108,7 +117,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4096
 # Bus options (PCI, PCMCIA, EISA, GSC, ISA)
 #
 CONFIG_GSC=y
-CONFIG_HPPB=y
+# CONFIG_HPPB is not set
 CONFIG_IOMMU_CCIO=y
 CONFIG_GSC_LASI=y
 CONFIG_GSC_WAX=y
@@ -126,7 +135,25 @@ CONFIG_IOMMU_SBA=y
 #
 # PCCARD (PCMCIA/CardBus) support
 #
-# CONFIG_PCCARD is not set
+CONFIG_PCCARD=y
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=y
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
+CONFIG_CARDBUS=y
+
+#
+# PC-card bridges
+#
+CONFIG_YENTA=y
+CONFIG_YENTA_O2=y
+CONFIG_YENTA_RICOH=y
+CONFIG_YENTA_TI=y
+CONFIG_YENTA_ENE_TUNE=y
+CONFIG_YENTA_TOSHIBA=y
+CONFIG_PD6729=y
+CONFIG_I82092=y
+CONFIG_PCCARD_NONSTATIC=y
 
 #
 # PCI Hotplug Support
@@ -145,7 +172,7 @@ CONFIG_PDC_STABLE=y
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
+CONFIG_BINFMT_MISC=m
 
 #
 # Networking
@@ -159,13 +186,15 @@ CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=m
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 # CONFIG_IP_ADVANCED_ROUTER is not set
 CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 # CONFIG_IP_PNP_RARP is not set
 # CONFIG_NET_IPIP is not set
@@ -173,19 +202,20 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_IP_MROUTE is not set
 # CONFIG_ARPD is not set
 # CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
 # CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_INET_DIAG is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_BIC=y
 CONFIG_IPV6=y
 # CONFIG_IPV6_PRIVACY is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_AH=y
+CONFIG_INET6_ESP=y
+CONFIG_INET6_IPCOMP=y
+CONFIG_INET6_TUNNEL=y
 # CONFIG_IPV6_TUNNEL is not set
 # CONFIG_NETFILTER is not set
 
@@ -207,7 +237,8 @@ CONFIG_IPV6=y
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
+CONFIG_LLC=m
+CONFIG_LLC2=m
 # CONFIG_IPX is not set
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
@@ -237,9 +268,9 @@ CONFIG_IPV6=y
 #
 # Generic Driver Options
 #
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_FW_LOADER=y
 # CONFIG_DEBUG_DRIVER is not set
 
 #
@@ -256,13 +287,14 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # Parallel port support
 #
 CONFIG_PARPORT=y
-CONFIG_PARPORT_PC=y
+CONFIG_PARPORT_PC=m
 # CONFIG_PARPORT_SERIAL is not set
 # CONFIG_PARPORT_PC_FIFO is not set
 # CONFIG_PARPORT_PC_SUPERIO is not set
+CONFIG_PARPORT_PC_PCMCIA=m
 CONFIG_PARPORT_NOT_PC=y
 CONFIG_PARPORT_GSC=y
-# CONFIG_PARPORT_1284 is not set
+CONFIG_PARPORT_1284=y
 
 #
 # Plug and Play support
@@ -284,7 +316,7 @@ CONFIG_BLK_DEV_CRYPTOLOOP=y
 # CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_SIZE=6144
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
@@ -292,7 +324,60 @@ CONFIG_BLK_DEV_INITRD=y
 #
 # ATA/ATAPI/MFM/RLL support
 #
-# CONFIG_IDE is not set
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+CONFIG_IDEDISK_MULTI_MODE=y
+CONFIG_BLK_DEV_IDECS=y
+CONFIG_BLK_DEV_IDECD=y
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+CONFIG_BLK_DEV_IDESCSI=y
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_IDEPCI=y
+CONFIG_IDEPCI_SHARE_IRQ=y
+# CONFIG_BLK_DEV_OFFBOARD is not set
+CONFIG_BLK_DEV_GENERIC=y
+# CONFIG_BLK_DEV_OPTI621 is not set
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
+# CONFIG_IDEDMA_PCI_AUTO is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT821X is not set
+CONFIG_BLK_DEV_NS87415=y
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_IDE_ARM is not set
+CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_IDEDMA_IVB is not set
+# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -375,6 +460,15 @@ CONFIG_SCSI_NCR53C8XX_SYNC=20
 # CONFIG_SCSI_DEBUG is not set
 
 #
+# PCMCIA SCSI adapter support
+#
+# CONFIG_PCMCIA_AHA152X is not set
+# CONFIG_PCMCIA_FDOMAIN is not set
+# CONFIG_PCMCIA_NINJA_SCSI is not set
+# CONFIG_PCMCIA_QLOGIC is not set
+# CONFIG_PCMCIA_SYM53C500 is not set
+
+#
 # Multi-device support (RAID and LVM)
 #
 CONFIG_MD=y
@@ -382,12 +476,17 @@ CONFIG_BLK_DEV_MD=y
 CONFIG_MD_LINEAR=y
 CONFIG_MD_RAID0=y
 CONFIG_MD_RAID1=y
-# CONFIG_MD_RAID10 is not set
+CONFIG_MD_RAID10=y
 CONFIG_MD_RAID5=y
-# CONFIG_MD_RAID6 is not set
+CONFIG_MD_RAID6=y
 # CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
-# CONFIG_BLK_DEV_DM is not set
+CONFIG_BLK_DEV_DM=y
+# CONFIG_DM_CRYPT is not set
+# CONFIG_DM_SNAPSHOT is not set
+# CONFIG_DM_MIRROR is not set
+# CONFIG_DM_ZERO is not set
+# CONFIG_DM_MULTIPATH is not set
 
 #
 # Fusion MPT device support
@@ -411,10 +510,10 @@ CONFIG_MD_RAID5=y
 # Network device support
 #
 CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
+CONFIG_DUMMY=m
+CONFIG_BONDING=m
 # CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
+CONFIG_TUN=m
 
 #
 # ARCnet devices
@@ -430,7 +529,7 @@ CONFIG_NETDEVICES=y
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
+CONFIG_MII=m
 CONFIG_LASI_82596=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
@@ -451,6 +550,8 @@ CONFIG_TULIP=y
 # CONFIG_WINBOND_840 is not set
 # CONFIG_DM9102 is not set
 # CONFIG_ULI526X is not set
+# CONFIG_PCMCIA_XIRCOM is not set
+# CONFIG_PCMCIA_XIRTULIP is not set
 # CONFIG_DEPCA is not set
 # CONFIG_HP100 is not set
 CONFIG_NET_PCI=y
@@ -518,14 +619,33 @@ CONFIG_NET_RADIO=y
 # Obsolete Wireless cards support (pre-802.11)
 #
 # CONFIG_STRIP is not set
+# CONFIG_PCMCIA_WAVELAN is not set
+# CONFIG_PCMCIA_NETWAVE is not set
+
+#
+# Wireless 802.11 Frequency Hopping cards support
+#
+# CONFIG_PCMCIA_RAYCS is not set
 
 #
 # Wireless 802.11b ISA/PCI cards support
 #
-# CONFIG_HERMES is not set
+CONFIG_HERMES=y
+# CONFIG_PLX_HERMES is not set
+# CONFIG_TMD_HERMES is not set
+# CONFIG_NORTEL_HERMES is not set
+# CONFIG_PCI_HERMES is not set
 # CONFIG_ATMEL is not set
 
 #
+# Wireless 802.11b Pcmcia/Cardbus cards support
+#
+CONFIG_PCMCIA_HERMES=y
+CONFIG_PCMCIA_SPECTRUM=y
+# CONFIG_AIRO_CS is not set
+# CONFIG_PCMCIA_WL3501 is not set
+
+#
 # Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
 #
 # CONFIG_PRISM54 is not set
@@ -533,13 +653,34 @@ CONFIG_NET_RADIO=y
 CONFIG_NET_WIRELESS=y
 
 #
+# PCMCIA network device support
+#
+CONFIG_NET_PCMCIA=y
+# CONFIG_PCMCIA_3C589 is not set
+# CONFIG_PCMCIA_3C574 is not set
+# CONFIG_PCMCIA_FMVJ18X is not set
+# CONFIG_PCMCIA_PCNET is not set
+# CONFIG_PCMCIA_NMCLAN is not set
+# CONFIG_PCMCIA_SMC91C92 is not set
+# CONFIG_PCMCIA_XIRC2PS is not set
+# CONFIG_PCMCIA_AXNET is not set
+
+#
 # Wan interfaces
 #
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
 # CONFIG_PLIP is not set
-# CONFIG_PPP is not set
+CONFIG_PPP=m
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
+CONFIG_PPPOE=m
 # CONFIG_SLIP is not set
 # CONFIG_NET_FC is not set
 # CONFIG_SHAPER is not set
@@ -571,14 +712,16 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
 # CONFIG_INPUT_TSDEV is not set
-CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
 #
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_ATKBD=y
+CONFIG_KEYBOARD_ATKBD_HP_KEYCODES=y
+# CONFIG_KEYBOARD_ATKBD_RDI_KEYCODES is not set
 # CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_LKKBD is not set
 # CONFIG_KEYBOARD_XTKBD is not set
@@ -586,52 +729,25 @@ CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_HIL_OLD is not set
 CONFIG_KEYBOARD_HIL=y
 CONFIG_INPUT_MOUSE=y
-# CONFIG_MOUSE_PS2 is not set
-# CONFIG_MOUSE_SERIAL is not set
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_SERIAL=y
 # CONFIG_MOUSE_VSXXXAA is not set
 CONFIG_MOUSE_HIL=y
-CONFIG_INPUT_JOYSTICK=y
-# CONFIG_JOYSTICK_ANALOG is not set
-# CONFIG_JOYSTICK_A3D is not set
-# CONFIG_JOYSTICK_ADI is not set
-# CONFIG_JOYSTICK_COBRA is not set
-# CONFIG_JOYSTICK_GF2K is not set
-# CONFIG_JOYSTICK_GRIP is not set
-# CONFIG_JOYSTICK_GRIP_MP is not set
-# CONFIG_JOYSTICK_GUILLEMOT is not set
-# CONFIG_JOYSTICK_INTERACT is not set
-# CONFIG_JOYSTICK_SIDEWINDER is not set
-# CONFIG_JOYSTICK_TMDC is not set
-# CONFIG_JOYSTICK_IFORCE is not set
-# CONFIG_JOYSTICK_WARRIOR is not set
-# CONFIG_JOYSTICK_MAGELLAN is not set
-# CONFIG_JOYSTICK_SPACEORB is not set
-# CONFIG_JOYSTICK_SPACEBALL is not set
-# CONFIG_JOYSTICK_STINGER is not set
-# CONFIG_JOYSTICK_TWIDJOY is not set
-# CONFIG_JOYSTICK_DB9 is not set
-# CONFIG_JOYSTICK_GAMECON is not set
-# CONFIG_JOYSTICK_TURBOGRAFX is not set
-# CONFIG_JOYSTICK_JOYDUMP is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_UINPUT is not set
-CONFIG_HP_SDC_RTC=y
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
 
 #
 # Hardware I/O ports
 #
 CONFIG_SERIO=y
-# CONFIG_SERIO_SERPORT is not set
+CONFIG_SERIO_SERPORT=y
 # CONFIG_SERIO_PARKBD is not set
 CONFIG_SERIO_GSCPS2=y
 CONFIG_HP_SDC=y
 CONFIG_HIL_MLC=y
 # CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
 # CONFIG_GAMEPORT is not set
 
@@ -648,7 +764,8 @@ CONFIG_HW_CONSOLE=y
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=13
+CONFIG_SERIAL_8250_CS=y
+CONFIG_SERIAL_8250_NR_UARTS=17
 CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
@@ -666,10 +783,10 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-CONFIG_PRINTER=y
+CONFIG_LEGACY_PTY_COUNT=64
+CONFIG_PRINTER=m
 # CONFIG_LP_CONSOLE is not set
-# CONFIG_PPDEV is not set
+CONFIG_PPDEV=m
 # CONFIG_TIPAR is not set
 
 #
@@ -682,7 +799,7 @@ CONFIG_PRINTER=y
 #
 # CONFIG_WATCHDOG is not set
 CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
+CONFIG_GEN_RTC_X=y
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
@@ -691,6 +808,13 @@ CONFIG_GEN_RTC=y
 # Ftape, the floppy tape device driver
 #
 # CONFIG_DRM is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
 # CONFIG_RAW_DRIVER is not set
 
 #
@@ -718,10 +842,8 @@ CONFIG_GEN_RTC=y
 #
 # Hardware Monitoring support
 #
-CONFIG_HWMON=y
+# CONFIG_HWMON is not set
 # CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 
 #
 # Misc devices
@@ -749,8 +871,8 @@ CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_MACMODES is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_TILEBLITTING=y
 # CONFIG_FB_CIRRUS is not set
 # CONFIG_FB_PM2 is not set
 # CONFIG_FB_CYBER2000 is not set
@@ -778,8 +900,8 @@ CONFIG_FB_STI=y
 # Console display driver support
 #
 CONFIG_DUMMY_CONSOLE=y
-CONFIG_DUMMY_CONSOLE_COLUMNS=160
-CONFIG_DUMMY_CONSOLE_ROWS=64
+CONFIG_DUMMY_CONSOLE_COLUMNS=128
+CONFIG_DUMMY_CONSOLE_ROWS=48
 CONFIG_FRAMEBUFFER_CONSOLE=y
 # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 CONFIG_STI_CONSOLE=y
@@ -816,13 +938,14 @@ CONFIG_SOUND=y
 CONFIG_SND=y
 CONFIG_SND_TIMER=y
 CONFIG_SND_PCM=y
+CONFIG_SND_HWDEP=y
 CONFIG_SND_SEQUENCER=y
 # CONFIG_SND_SEQ_DUMMY is not set
 CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
 CONFIG_SND_SEQUENCER_OSS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_DYNAMIC_MINORS=y
 CONFIG_SND_SUPPORT_OLD_API=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
@@ -830,6 +953,7 @@ CONFIG_SND_SUPPORT_OLD_API=y
 #
 # Generic devices
 #
+CONFIG_SND_OPL3_LIB=y
 CONFIG_SND_AC97_CODEC=y
 CONFIG_SND_AC97_BUS=y
 # CONFIG_SND_DUMMY is not set
@@ -842,7 +966,7 @@ CONFIG_SND_AC97_BUS=y
 # PCI devices
 #
 CONFIG_SND_AD1889=y
-# CONFIG_SND_AD1889_OPL3 is not set
+CONFIG_SND_AD1889_OPL3=y
 # CONFIG_SND_ALI5451 is not set
 # CONFIG_SND_ATIIXP is not set
 # CONFIG_SND_ATIIXP_MODEM is not set
@@ -890,6 +1014,10 @@ CONFIG_SND_AD1889=y
 # CONFIG_SND_USB_AUDIO is not set
 
 #
+# PCMCIA devices
+#
+
+#
 # GSC devices
 #
 CONFIG_SND_HARMONY=y
@@ -905,12 +1033,12 @@ CONFIG_SND_HARMONY=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB=y
-CONFIG_USB_DEBUG=y
+# CONFIG_USB_DEBUG is not set
 
 #
 # Miscellaneous USB options
 #
-# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_BANDWIDTH is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
@@ -918,14 +1046,12 @@ CONFIG_USB_DEBUG=y
 #
 # USB Host Controller Drivers
 #
-CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_BIG_ENDIAN is not set
 CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
+CONFIG_USB_UHCI_HCD=y
 # CONFIG_USB_SL811_HCD is not set
 
 #
@@ -948,13 +1074,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 #
 # USB Input Devices
 #
-# CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
+CONFIG_USB_HID=y
+CONFIG_USB_HIDINPUT=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
 # CONFIG_USB_AIPTEK is not set
 # CONFIG_USB_WACOM is not set
 # CONFIG_USB_ACECAD is not set
@@ -1020,8 +1144,8 @@ CONFIG_USB_MON=y
 # CONFIG_USB_PHIDGETKIT is not set
 # CONFIG_USB_PHIDGETSERVO is not set
 # CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_SISUSBVGA is not set
 # CONFIG_USB_LD is not set
+# CONFIG_USB_TEST is not set
 
 #
 # USB DSL modem support
@@ -1058,7 +1182,7 @@ CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
@@ -1066,7 +1190,7 @@ CONFIG_JBD=y
 CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS_FS=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
@@ -1081,8 +1205,11 @@ CONFIG_JOLIET=y
 #
 # DOS/FAT/NT Filesystems
 #
+CONFIG_FAT_FS=y
 # CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 # CONFIG_NTFS_FS is not set
 
 #
@@ -1125,7 +1252,7 @@ CONFIG_NFS_V3=y
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
+CONFIG_NFSD_V4=y
 CONFIG_NFSD_TCP=y
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
@@ -1133,10 +1260,16 @@ CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+CONFIG_RPCSEC_GSS_SPKM3=m
+CONFIG_SMB_FS=m
+CONFIG_SMB_NLS_DEFAULT=y
+CONFIG_SMB_NLS_REMOTE="cp437"
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
@@ -1153,50 +1286,50 @@ CONFIG_MSDOS_PARTITION=y
 #
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=y
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=y
 
 #
 # Profiling support
 #
 CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
+CONFIG_OPROFILE=m
 
 #
 # Kernel hacking
@@ -1204,7 +1337,7 @@ CONFIG_OPROFILE=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
-CONFIG_LOG_BUF_SHIFT=15
+CONFIG_LOG_BUF_SHIFT=16
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
@@ -1217,42 +1350,43 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_VM is not set
 CONFIG_FORCED_INLINING=y
 # CONFIG_RCU_TORTURE_TEST is not set
-CONFIG_DEBUG_RODATA=y
+# CONFIG_DEBUG_RODATA is not set
 
 #
 # Security options
 #
-# CONFIG_KEYS is not set
+CONFIG_KEYS=y
+CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # CONFIG_SECURITY is not set
 
 #
 # Cryptographic options
 #
 CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_TEST is not set
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_TEST=m
 
 #
 # Hardware crypto devices
@@ -1261,7 +1395,9 @@ CONFIG_CRYPTO=y
 #
 # Library routines
 #
-# CONFIG_CRC_CCITT is not set
+CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
 CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/parisc/kernel/asm-offsets.c b/arch/parisc/kernel/asm-offsets.c
index e23c4e1e3a25..c11a5bc7c067 100644
--- a/arch/parisc/kernel/asm-offsets.c
+++ b/arch/parisc/kernel/asm-offsets.c
@@ -288,8 +288,11 @@ int main(void)
 	DEFINE(ASM_PGD_ENTRY_SIZE, PGD_ENTRY_SIZE);
 	DEFINE(ASM_PMD_ENTRY_SIZE, PMD_ENTRY_SIZE);
 	DEFINE(ASM_PTE_ENTRY_SIZE, PTE_ENTRY_SIZE);
+	DEFINE(ASM_PFN_PTE_SHIFT, PFN_PTE_SHIFT);
 	DEFINE(ASM_PT_INITIAL, PT_INITIAL);
 	DEFINE(ASM_PAGE_SIZE, PAGE_SIZE);
+	DEFINE(ASM_PAGE_SIZE_DIV64, PAGE_SIZE/64);
+	DEFINE(ASM_PAGE_SIZE_DIV128, PAGE_SIZE/128);
 	BLANK();
 	DEFINE(EXCDATA_IP, offsetof(struct exception_data, fault_ip));
 	DEFINE(EXCDATA_SPACE, offsetof(struct exception_data, fault_space));
diff --git a/arch/parisc/kernel/cache.c b/arch/parisc/kernel/cache.c
index 360b7391cb8c..c057ad7605ba 100644
--- a/arch/parisc/kernel/cache.c
+++ b/arch/parisc/kernel/cache.c
@@ -4,7 +4,7 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  *
- * Copyright (C) 1999 Helge Deller (07-13-1999)
+ * Copyright (C) 1999-2006 Helge Deller <deller@gmx.de> (07-13-1999)
  * Copyright (C) 1999 SuSE GmbH Nuernberg
  * Copyright (C) 2000 Philipp Rumpf (prumpf@tux.org)
  *
@@ -358,5 +358,5 @@ void parisc_setup_cache_timing(void)
 	if (!parisc_cache_flush_threshold)
 		parisc_cache_flush_threshold = FLUSH_THRESHOLD;
 
-	printk("Setting cache flush threshold to %x (%d CPUs online)\n", parisc_cache_flush_threshold, num_online_cpus());
+	printk(KERN_INFO "Setting cache flush threshold to %x (%d CPUs online)\n", parisc_cache_flush_threshold, num_online_cpus());
 }
diff --git a/arch/parisc/kernel/entry.S b/arch/parisc/kernel/entry.S
index 7c95d7663c29..d9e53cf0372b 100644
--- a/arch/parisc/kernel/entry.S
+++ b/arch/parisc/kernel/entry.S
@@ -502,18 +502,20 @@
 	 * all ILP32 processes and all the kernel for machines with
 	 * under 4GB of memory) */
 	.macro		L3_ptep pgd,pte,index,va,fault
+#if PT_NLEVELS == 3 /* we might have a 2-Level scheme, e.g. with 16kb page size */
 	extrd,u		\va,63-ASM_PGDIR_SHIFT,ASM_BITS_PER_PGD,\index
 	copy		%r0,\pte
-	extrd,u,*=	\va,31,32,%r0
+	extrd,u,*=	\va,63-ASM_PGDIR_SHIFT,64-ASM_PGDIR_SHIFT,%r0
 	ldw,s		\index(\pgd),\pgd
-	extrd,u,*=	\va,31,32,%r0
+	extrd,u,*=	\va,63-ASM_PGDIR_SHIFT,64-ASM_PGDIR_SHIFT,%r0
 	bb,>=,n		\pgd,_PxD_PRESENT_BIT,\fault
-	extrd,u,*=	\va,31,32,%r0
+	extrd,u,*=	\va,63-ASM_PGDIR_SHIFT,64-ASM_PGDIR_SHIFT,%r0
 	shld		\pgd,PxD_VALUE_SHIFT,\index
-	extrd,u,*=	\va,31,32,%r0
+	extrd,u,*=	\va,63-ASM_PGDIR_SHIFT,64-ASM_PGDIR_SHIFT,%r0
 	copy		\index,\pgd
-	extrd,u,*<>	\va,31,32,%r0
+	extrd,u,*<>	\va,63-ASM_PGDIR_SHIFT,64-ASM_PGDIR_SHIFT,%r0
 	ldo		ASM_PGD_PMD_OFFSET(\pgd),\pgd
+#endif
 	L2_ptep		\pgd,\pte,\index,\va,\fault
 	.endm
 
@@ -563,10 +565,18 @@
 	extrd,u,*= 	\pte,_PAGE_GATEWAY_BIT+32,1,%r0
 	depd		%r0,11,2,\prot	/* If Gateway, Set PL2 to 0 */
 
-	/* Get rid of prot bits and convert to page addr for iitlbt and idtlbt */
+	/* Enforce uncacheable pages.
+	 * This should ONLY be use for MMIO on PA 2.0 machines.
+	 * Memory/DMA is cache coherent on all PA2.0 machines we support
+	 * (that means T-class is NOT supported) and the memory controllers
+	 * on most of those machines only handles cache transactions.
+	 */
+	extrd,u,*=	\pte,_PAGE_NO_CACHE_BIT+32,1,%r0
+	depi		1,12,1,\prot
 
-	depd		%r0,63,PAGE_SHIFT,\pte
-	extrd,s		\pte,(63-PAGE_SHIFT)+(63-58),64-PAGE_SHIFT,\pte
+	/* Drop prot bits and convert to page addr for iitlbt and idtlbt */
+	extrd,u		\pte,(63-ASM_PFN_PTE_SHIFT)+(63-58),64-PAGE_SHIFT,\pte
+	depdi		_PAGE_SIZE_ENCODING_DEFAULT,63,63-58,\pte
 	.endm
 
 	/* Identical macro to make_insert_tlb above, except it
@@ -584,9 +594,8 @@
 
 	/* Get rid of prot bits and convert to page addr for iitlba */
 
-	depi		0,31,PAGE_SHIFT,\pte
+	depi		_PAGE_SIZE_ENCODING_DEFAULT,31,ASM_PFN_PTE_SHIFT,\pte
 	extru		\pte,24,25,\pte
-
 	.endm
 
 	/* This is for ILP32 PA2.0 only.  The TLB insertion needs
@@ -1201,10 +1210,9 @@ intr_save:
 	 */
 
 	/* adjust isr/ior. */
-
-	extrd,u         %r16,63,7,%r1    /* get high bits from isr for ior */
-	depd            %r1,31,7,%r17    /* deposit them into ior */
-	depdi           0,63,7,%r16      /* clear them from isr */
+	extrd,u         %r16,63,SPACEID_SHIFT,%r1	/* get high bits from isr for ior */
+	depd            %r1,31,SPACEID_SHIFT,%r17	/* deposit them into ior */
+	depdi           0,63,SPACEID_SHIFT,%r16		/* clear them from isr */
 #endif
 	STREG           %r16, PT_ISR(%r29)
 	STREG           %r17, PT_IOR(%r29)
diff --git a/arch/parisc/kernel/head.S b/arch/parisc/kernel/head.S
index 0b47afc20690..3e79e62f7b0b 100644
--- a/arch/parisc/kernel/head.S
+++ b/arch/parisc/kernel/head.S
@@ -76,16 +76,16 @@ $bss_loop:
 	mtctl		%r4,%cr24	/* Initialize kernel root pointer */
 	mtctl		%r4,%cr25	/* Initialize user root pointer */
 
-#ifdef CONFIG_64BIT
+#if PT_NLEVELS == 3
 	/* Set pmd in pgd */
 	load32		PA(pmd0),%r5
 	shrd            %r5,PxD_VALUE_SHIFT,%r3	
-        ldo             (PxD_FLAG_PRESENT+PxD_FLAG_VALID)(%r3),%r3	
+	ldo		(PxD_FLAG_PRESENT+PxD_FLAG_VALID)(%r3),%r3
 	stw		%r3,ASM_PGD_ENTRY*ASM_PGD_ENTRY_SIZE(%r4)
 	ldo		ASM_PMD_ENTRY*ASM_PMD_ENTRY_SIZE(%r5),%r4
 #else
 	/* 2-level page table, so pmd == pgd */
-        ldo             ASM_PGD_ENTRY*ASM_PGD_ENTRY_SIZE(%r4),%r4
+	ldo		ASM_PGD_ENTRY*ASM_PGD_ENTRY_SIZE(%r4),%r4
 #endif
 
 	/* Fill in pmd with enough pte directories */
@@ -99,7 +99,7 @@ $bss_loop:
 	stw		%r3,0(%r4)
 	ldo		(ASM_PAGE_SIZE >> PxD_VALUE_SHIFT)(%r3),%r3
 	addib,>		-1,%r1,1b
-#ifdef CONFIG_64BIT
+#if PT_NLEVELS == 3
 	ldo             ASM_PMD_ENTRY_SIZE(%r4),%r4
 #else
 	ldo             ASM_PGD_ENTRY_SIZE(%r4),%r4
@@ -107,13 +107,14 @@ $bss_loop:
 
 
 	/* Now initialize the PTEs themselves */
-	ldo		_PAGE_KERNEL(%r0),%r3 /* Hardwired 0 phys addr start */
+	ldo		0+_PAGE_KERNEL(%r0),%r3 /* Hardwired 0 phys addr start */
+	ldi		(1<<(KERNEL_INITIAL_ORDER-PAGE_SHIFT)),%r11 /* PFN count */
 	load32		PA(pg0),%r1
 
 $pgt_fill_loop:
 	STREGM          %r3,ASM_PTE_ENTRY_SIZE(%r1)
-	ldo		ASM_PAGE_SIZE(%r3),%r3
-	bb,>=		%r3,31-KERNEL_INITIAL_ORDER,$pgt_fill_loop
+	ldo		(1<<PFN_PTE_SHIFT)(%r3),%r3 /* add one PFN */
+	addib,>		-1,%r11,$pgt_fill_loop
 	nop
 
 	/* Load the return address...er...crash 'n burn */
diff --git a/arch/parisc/kernel/init_task.c b/arch/parisc/kernel/init_task.c
index 7e898fd64415..8384bf9cecd2 100644
--- a/arch/parisc/kernel/init_task.c
+++ b/arch/parisc/kernel/init_task.c
@@ -53,17 +53,17 @@ union thread_union init_thread_union
 	__attribute__((aligned(128))) __attribute__((__section__(".data.init_task"))) =
 		{ INIT_THREAD_INFO(init_task) };
 
-#ifdef __LP64__
+#if PT_NLEVELS == 3
 /* NOTE: This layout exactly conforms to the hybrid L2/L3 page table layout
  * with the first pmd adjacent to the pgd and below it. gcc doesn't actually
  * guarantee that global objects will be laid out in memory in the same order 
  * as the order of declaration, so put these in different sections and use
  * the linker script to order them. */
-pmd_t pmd0[PTRS_PER_PMD] __attribute__ ((aligned(PAGE_SIZE))) __attribute__ ((__section__ (".data.vm0.pmd"))) = { {0}, };
-
+pmd_t pmd0[PTRS_PER_PMD] __attribute__ ((__section__ (".data.vm0.pmd"), aligned(PAGE_SIZE)));
 #endif
-pgd_t swapper_pg_dir[PTRS_PER_PGD] __attribute__ ((aligned(PAGE_SIZE))) __attribute__ ((__section__ (".data.vm0.pgd"))) = { {0}, };
-pte_t pg0[PT_INITIAL * PTRS_PER_PTE] __attribute__ ((aligned(PAGE_SIZE))) __attribute__ ((__section__ (".data.vm0.pte")))  = { {0}, };
+
+pgd_t swapper_pg_dir[PTRS_PER_PGD] __attribute__ ((__section__ (".data.vm0.pgd"), aligned(PAGE_SIZE)));
+pte_t pg0[PT_INITIAL * PTRS_PER_PTE] __attribute__ ((__section__ (".data.vm0.pte"), aligned(PAGE_SIZE)));
 
 /*
  * Initial task structure.
diff --git a/arch/parisc/kernel/pacache.S b/arch/parisc/kernel/pacache.S
index 7a4f07e8d3c3..f600556414d1 100644
--- a/arch/parisc/kernel/pacache.S
+++ b/arch/parisc/kernel/pacache.S
@@ -65,7 +65,7 @@ flush_tlb_all_local:
 	 */
 
 	/* pcxt_ssm_bug	- relied upon translation! PA 2.0 Arch. F-4 and F-5 */
-	rsm	PSW_SM_I, %r19		/* save I-bit state */
+	rsm		PSW_SM_I, %r19		/* save I-bit state */
 	load32		PA(1f), %r1
 	nop
 	nop
@@ -84,8 +84,7 @@ flush_tlb_all_local:
 	rfi
 	nop
 
-1:      ldil		L%PA(cache_info), %r1
-	ldo		R%PA(cache_info)(%r1), %r1
+1:      load32		PA(cache_info), %r1
 
 	/* Flush Instruction Tlb */
 
@@ -212,8 +211,7 @@ flush_instruction_cache_local:
 	.entry
 
 	mtsp		%r0, %sr1
-	ldil		L%cache_info, %r1
-	ldo		R%cache_info(%r1), %r1
+	load32		cache_info, %r1
 
 	/* Flush Instruction Cache */
 
@@ -254,8 +252,7 @@ flush_data_cache_local:
 	.entry
 
 	mtsp		%r0, %sr1
-	ldil		L%cache_info, %r1
-	ldo		R%cache_info(%r1), %r1
+	load32 		cache_info, %r1
 
 	/* Flush Data Cache */
 
@@ -303,7 +300,8 @@ copy_user_page_asm:
 	 */
 
 	ldd		0(%r25), %r19
-	ldi		32, %r1                 /* PAGE_SIZE/128 == 32 */
+	ldi		ASM_PAGE_SIZE_DIV128, %r1
+
 	ldw		64(%r25), %r0		/* prefetch 1 cacheline ahead */
 	ldw		128(%r25), %r0		/* prefetch 2 */
 
@@ -368,7 +366,7 @@ copy_user_page_asm:
 	 * use ldd/std on a 32 bit kernel.
 	 */
 	ldw		0(%r25), %r19
-	ldi		64, %r1		/* PAGE_SIZE/64 == 64 */
+	ldi		ASM_PAGE_SIZE_DIV64, %r1
 
 1:
 	ldw		4(%r25), %r20
@@ -461,6 +459,7 @@ copy_user_page_asm:
 	sub		%r25, %r1, %r23		/* move physical addr into non shadowed reg */
 
 	ldil		L%(TMPALIAS_MAP_START), %r28
+	/* FIXME for different page sizes != 4k */
 #ifdef CONFIG_64BIT
 	extrd,u		%r26,56,32, %r26		/* convert phys addr to tlb insert format */
 	extrd,u		%r23,56,32, %r23		/* convert phys addr to tlb insert format */
@@ -551,6 +550,7 @@ __clear_user_page_asm:
 #ifdef CONFIG_64BIT
 #if (TMPALIAS_MAP_START >= 0x80000000)
 	depdi		0, 31,32, %r28		/* clear any sign extension */
+	/* FIXME: page size dependend */
 #endif
 	extrd,u		%r26, 56,32, %r26	/* convert phys addr to tlb insert format */
 	depd		%r25, 63,22, %r28	/* Form aliased virtual address 'to' */
@@ -566,10 +566,10 @@ __clear_user_page_asm:
 	pdtlb		0(%r28)
 
 #ifdef CONFIG_64BIT
-	ldi		32, %r1			/* PAGE_SIZE/128 == 32 */
+	ldi		ASM_PAGE_SIZE_DIV128, %r1
 
 	/* PREFETCH (Write) has not (yet) been proven to help here */
-/* #define	PREFETCHW_OP	ldd		256(%0), %r0 */
+	/* #define	PREFETCHW_OP	ldd		256(%0), %r0 */
 
 1:	std		%r0, 0(%r28)
 	std		%r0, 8(%r28)
@@ -591,8 +591,7 @@ __clear_user_page_asm:
 	ldo		128(%r28), %r28
 
 #else	/* ! CONFIG_64BIT */
-
-	ldi		64, %r1			/* PAGE_SIZE/64 == 64 */
+	ldi		ASM_PAGE_SIZE_DIV64, %r1
 
 1:
 	stw		%r0, 0(%r28)
diff --git a/arch/parisc/kernel/sys_parisc.c b/arch/parisc/kernel/sys_parisc.c
index d15a1d53e101..8b5df98e2b31 100644
--- a/arch/parisc/kernel/sys_parisc.c
+++ b/arch/parisc/kernel/sys_parisc.c
@@ -231,6 +231,14 @@ asmlinkage long parisc_fadvise64_64(int fd,
 			(loff_t)high_len << 32 | low_len, advice);
 }
 
+asmlinkage long parisc_sync_file_range(int fd,
+			u32 hi_off, u32 lo_off, u32 hi_nbytes, u32 lo_nbytes,
+			unsigned int flags)
+{
+	return sys_sync_file_range(fd, (loff_t)hi_off << 32 | lo_off,
+			(loff_t)hi_nbytes << 32 | lo_nbytes, flags);
+}
+
 asmlinkage unsigned long sys_alloc_hugepages(int key, unsigned long addr, unsigned long len, int prot, int flag)
 {
 	return -ENOMEM;
diff --git a/arch/parisc/kernel/syscall.S b/arch/parisc/kernel/syscall.S
index af88afef41bd..479d9a017cd1 100644
--- a/arch/parisc/kernel/syscall.S
+++ b/arch/parisc/kernel/syscall.S
@@ -55,7 +55,7 @@
 	 * pointers.
 	 */
 
-	.align 4096
+	.align ASM_PAGE_SIZE
 linux_gateway_page:
 
         /* ADDRESS 0x00 to 0xb0 = 176 bytes / 4 bytes per insn = 44 insns */
@@ -632,7 +632,7 @@ cas_action:
 end_compare_and_swap:
 
 	/* Make sure nothing else is placed on this page */
-	.align 4096
+	.align ASM_PAGE_SIZE
 	.export end_linux_gateway_page
 end_linux_gateway_page:
 
@@ -652,7 +652,7 @@ end_linux_gateway_page:
 
 	.section .rodata,"a"
 
-	.align 4096
+	.align ASM_PAGE_SIZE
 	/* Light-weight-syscall table */
 	/* Start of lws table. */
 	.export lws_table
@@ -662,14 +662,14 @@ lws_table:
 	LWS_ENTRY(compare_and_swap64)	/* 1 - ELF64 Atomic compare and swap */
 	/* End of lws table */
 
-	.align 4096
+	.align ASM_PAGE_SIZE
 	.export sys_call_table
 .Lsys_call_table:
 sys_call_table:
 #include "syscall_table.S"
 
 #ifdef CONFIG_64BIT
-	.align 4096
+	.align ASM_PAGE_SIZE
 	.export sys_call_table64
 .Lsys_call_table64:
 sys_call_table64:
diff --git a/arch/parisc/kernel/syscall_table.S b/arch/parisc/kernel/syscall_table.S
index bbeeb614cfab..e27b432f90a8 100644
--- a/arch/parisc/kernel/syscall_table.S
+++ b/arch/parisc/kernel/syscall_table.S
@@ -13,7 +13,7 @@
  *    Copyright (C) 2001 Helge Deller <deller at parisc-linux.org>
  *    Copyright (C) 2000-2001 Thomas Bogendoerfer <tsbogend at parisc-linux.org>
  *    Copyright (C) 2002 Randolph Chung <tausq with parisc-linux.org>
- *
+ *    Copyright (C) 2005-2006 Kyle McMartin <kyle at parisc-linux.org>
  *
  *    This program is free software; you can redistribute it and/or modify
  *    it under the terms of the GNU General Public License as published by
@@ -393,5 +393,11 @@
 	ENTRY_SAME(readlinkat)		/* 285 */
 	ENTRY_SAME(fchmodat)
 	ENTRY_SAME(faccessat)
+	ENTRY_SAME(unshare)
+	ENTRY_COMP(set_robust_list)
+	ENTRY_COMP(get_robust_list)	/* 290 */
+	ENTRY_SAME(splice)
+	ENTRY_OURS(sync_file_range)
+	ENTRY_SAME(tee)
 	/* Nothing yet */
 
diff --git a/arch/parisc/kernel/vmlinux.lds.S b/arch/parisc/kernel/vmlinux.lds.S
index 6d6436a6b624..94dcc03a28ed 100644
--- a/arch/parisc/kernel/vmlinux.lds.S
+++ b/arch/parisc/kernel/vmlinux.lds.S
@@ -6,6 +6,7 @@
  *    Copyright (C) 2000 Michael Ang <mang with subcarrier.org>
  *    Copyright (C) 2002 Randolph Chung <tausq with parisc-linux.org>
  *    Copyright (C) 2003 James Bottomley <jejb with parisc-linux.org>
+ *    Copyright (C) 2006 Helge Deller <deller@gmx.de>
  *
  *
  *    This program is free software; you can redistribute it and/or modify
@@ -27,6 +28,7 @@
 /* needed for the processor specific cache alignment size */	
 #include <asm/cache.h>
 #include <asm/page.h>
+#include <asm/asm-offsets.h>
 	
 /* ld script to make hppa Linux kernel */
 #ifndef CONFIG_64BIT
@@ -68,7 +70,7 @@ SECTIONS
   RODATA
 
   /* writeable */
-  . = ALIGN(4096);		/* Make sure this is page aligned so
+  . = ALIGN(ASM_PAGE_SIZE);	/* Make sure this is page aligned so
   				   that we can properly leave these
 				   as writable */
   data_start = .;
@@ -81,23 +83,17 @@ SECTIONS
   __start___unwind = .;         /* unwind info */
   .PARISC.unwind : { *(.PARISC.unwind) }
   __stop___unwind = .;
- 
+
+  /* rarely changed data like cpu maps */
+  . = ALIGN(16);
+  .data.read_mostly : { *(.data.read_mostly) }
+
+  . = ALIGN(L1_CACHE_BYTES);
   .data : {			/* Data */
 	*(.data)
-	*(.data.vm0.pmd)
-	*(.data.vm0.pgd)
-	*(.data.vm0.pte)
 	CONSTRUCTORS
 	}
 
-  . = ALIGN(4096);
-  /* nosave data is really only used for software suspend...it's here
-   * just in case we ever implement it */
-  __nosave_begin = .;
-  .data_nosave : { *(.data.nosave) }
-  . = ALIGN(4096);
-  __nosave_end = .;
-
   . = ALIGN(L1_CACHE_BYTES);
   .data.cacheline_aligned : { *(.data.cacheline_aligned) }
 
@@ -105,12 +101,29 @@ SECTIONS
   . = ALIGN(16);
   .data.lock_aligned : { *(.data.lock_aligned) }
 
-  /* rarely changed data like cpu maps */
-  . = ALIGN(16);
-  .data.read_mostly : { *(.data.read_mostly) }
+  . = ALIGN(ASM_PAGE_SIZE);
+  /* nosave data is really only used for software suspend...it's here
+   * just in case we ever implement it */
+  __nosave_begin = .;
+  .data_nosave : { *(.data.nosave) }
+  . = ALIGN(ASM_PAGE_SIZE);
+  __nosave_end = .;
 
   _edata = .;			/* End of data section */
 
+  __bss_start = .;		/* BSS */
+  /* page table entries need to be PAGE_SIZE aligned */
+  . = ALIGN(ASM_PAGE_SIZE);
+  .data.vmpages : {
+	*(.data.vm0.pmd)
+	*(.data.vm0.pgd)
+	*(.data.vm0.pte)
+	}
+  .bss : { *(.bss) *(COMMON) }
+  __bss_stop = .;
+
+
+  /* assembler code expects init_task to be 16k aligned */
   . = ALIGN(16384); 		/* init_task */
   .data.init_task : { *(.data.init_task) }
 
@@ -126,6 +139,7 @@ SECTIONS
   .dlt : { *(.dlt) }
 #endif
 
+  /* reserve space for interrupt stack by aligning __init* to 16k */
   . = ALIGN(16384);
   __init_begin = .;
   .init.text : { 
@@ -166,7 +180,7 @@ SECTIONS
      from .altinstructions and .eh_frame */
   .exit.text : { *(.exit.text) }
   .exit.data : { *(.exit.data) }
-  . = ALIGN(4096);
+  . = ALIGN(ASM_PAGE_SIZE);
   __initramfs_start = .;
   .init.ramfs : { *(.init.ramfs) }
   __initramfs_end = .;
@@ -174,14 +188,10 @@ SECTIONS
   __per_cpu_start = .;
   .data.percpu  : { *(.data.percpu) }
   __per_cpu_end = .;
-  . = ALIGN(4096);
+  . = ALIGN(ASM_PAGE_SIZE);
   __init_end = .;
   /* freed after init ends here */
 	
-  __bss_start = .;		/* BSS */
-  .bss : { *(.bss) *(COMMON) }
-  __bss_stop = .; 
-
   _end = . ;
 
   /* Sections to be discarded */
diff --git a/arch/parisc/mm/fault.c b/arch/parisc/mm/fault.c
index 0ad945d4c0a4..64785e46f93b 100644
--- a/arch/parisc/mm/fault.c
+++ b/arch/parisc/mm/fault.c
@@ -186,7 +186,7 @@ good_area:
 		break;
 	      case VM_FAULT_SIGBUS:
 		/*
-		 * We hit a hared mapping outside of the file, or some
+		 * We hit a shared mapping outside of the file, or some
 		 * other thing happened to us that made us unable to
 		 * handle the page fault gracefully.
 		 */
diff --git a/arch/parisc/mm/init.c b/arch/parisc/mm/init.c
index 3796be67cd53..631712562656 100644
--- a/arch/parisc/mm/init.c
+++ b/arch/parisc/mm/init.c
@@ -6,6 +6,7 @@
  *    changed by Philipp Rumpf
  *  Copyright 1999 Philipp Rumpf (prumpf@tux.org)
  *  Copyright 2004 Randolph Chung (tausq@debian.org)
+ *  Copyright 2006 Helge Deller (deller@gmx.de)
  *
  */
 
@@ -371,8 +372,8 @@ static void __init setup_bootmem(void)
 
 void free_initmem(void)
 {
-	unsigned long addr;
-	
+	unsigned long addr, init_begin, init_end;
+
 	printk(KERN_INFO "Freeing unused kernel memory: ");
 
 #ifdef CONFIG_DEBUG_KERNEL
@@ -395,8 +396,11 @@ void free_initmem(void)
 	local_irq_enable();
 #endif
 	
-	addr = (unsigned long)(&__init_begin);
-	for (; addr < (unsigned long)(&__init_end); addr += PAGE_SIZE) {
+	/* align __init_begin and __init_end to page size,
+	   ignoring linker script where we might have tried to save RAM */
+	init_begin = PAGE_ALIGN((unsigned long)(&__init_begin));
+	init_end   = PAGE_ALIGN((unsigned long)(&__init_end));
+	for (addr = init_begin; addr < init_end; addr += PAGE_SIZE) {
 		ClearPageReserved(virt_to_page(addr));
 		init_page_count(virt_to_page(addr));
 		free_page(addr);
@@ -407,7 +411,7 @@ void free_initmem(void)
 	/* set up a new led state on systems shipped LED State panel */
 	pdc_chassis_send_status(PDC_CHASSIS_DIRECT_BCOMPLETE);
 	
-	printk("%luk freed\n", (unsigned long)(&__init_end - &__init_begin) >> 10);
+	printk("%luk freed\n", (init_end - init_begin) >> 10);
 }
 
 
@@ -639,11 +643,13 @@ static void __init map_pages(unsigned long start_vaddr, unsigned long start_padd
 				 * Map the fault vector writable so we can
 				 * write the HPMC checksum.
 				 */
+#if defined(CONFIG_PARISC_PAGE_SIZE_4KB)
 				if (address >= ro_start && address < ro_end
 							&& address != fv_addr
 							&& address != gw_addr)
 				    pte = __mk_pte(address, PAGE_KERNEL_RO);
 				else
+#endif
 				    pte = __mk_pte(address, pgprot);
 
 				if (address >= end_paddr)
@@ -874,8 +880,7 @@ unsigned long alloc_sid(void)
 			flush_tlb_all(); /* flush_tlb_all() calls recycle_sids() */
 			spin_lock(&sid_lock);
 		}
-		if (free_space_ids == 0)
-			BUG();
+		BUG_ON(free_space_ids == 0);
 	}
 
 	free_space_ids--;
@@ -899,8 +904,7 @@ void free_sid(unsigned long spaceid)
 
 	spin_lock(&sid_lock);
 
-	if (*dirty_space_offset & (1L << index))
-	    BUG(); /* attempt to free space id twice */
+	BUG_ON(*dirty_space_offset & (1L << index)); /* attempt to free space id twice */
 
 	*dirty_space_offset |= (1L << index);
 	dirty_space_ids++;
@@ -975,7 +979,7 @@ static void recycle_sids(void)
 
 static unsigned long recycle_ndirty;
 static unsigned long recycle_dirty_array[SID_ARRAY_SIZE];
-static unsigned int recycle_inuse = 0;
+static unsigned int recycle_inuse;
 
 void flush_tlb_all(void)
 {
@@ -984,9 +988,7 @@ void flush_tlb_all(void)
 	do_recycle = 0;
 	spin_lock(&sid_lock);
 	if (dirty_space_ids > RECYCLE_THRESHOLD) {
-	    if (recycle_inuse) {
-		BUG();  /* FIXME: Use a semaphore/wait queue here */
-	    }
+	    BUG_ON(recycle_inuse);  /* FIXME: Use a semaphore/wait queue here */
 	    get_dirty_sids(&recycle_ndirty,recycle_dirty_array);
 	    recycle_inuse++;
 	    do_recycle++;
diff --git a/arch/parisc/mm/ioremap.c b/arch/parisc/mm/ioremap.c
index 0db12818d7bc..27384567a1d0 100644
--- a/arch/parisc/mm/ioremap.c
+++ b/arch/parisc/mm/ioremap.c
@@ -2,7 +2,7 @@
  * arch/parisc/mm/ioremap.c
  *
  * (C) Copyright 1995 1996 Linus Torvalds
- * (C) Copyright 2001 Helge Deller <deller@gmx.de>
+ * (C) Copyright 2001-2006 Helge Deller <deller@gmx.de>
  * (C) Copyright 2005 Kyle McMartin <kyle@parisc-linux.org>
  */
 
@@ -138,6 +138,7 @@ void __iomem * __ioremap(unsigned long phys_addr, unsigned long size, unsigned l
 	if ((phys_addr >= 0x00080000 && end < 0x000fffff) ||
 	    (phys_addr >= 0x00500000 && end < 0x03bfffff)) {
 		phys_addr |= F_EXTEND(0xfc000000);
+		flags |= _PAGE_NO_CACHE;
 	}
 #endif
 
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 167e70e95556..6729c98b66f9 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -366,6 +366,7 @@ config PPC_PMAC64
 	select U3_DART
 	select MPIC_BROKEN_U3
 	select GENERIC_TBSYNC
+	select PPC_970_NAP
 	default y
 
 config PPC_PREP
@@ -383,6 +384,7 @@ config PPC_MAPLE
 	select MPIC_BROKEN_U3
 	select GENERIC_TBSYNC
 	select PPC_UDBG_16550
+	select PPC_970_NAP
 	default n
 	help
           This option enables support for the Maple 970FX Evaluation Board.
@@ -457,6 +459,10 @@ config PPC_MPC106
 	bool
 	default n
 
+config PPC_970_NAP
+	bool
+	default n
+
 source "drivers/cpufreq/Kconfig"
 
 config CPU_FREQ_PMAC
diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index 6ec84d37a337..ed5b26aa8be3 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -104,6 +104,10 @@ ifndef CONFIG_FSL_BOOKE
 CFLAGS		+= -mstring
 endif
 
+ifeq ($(CONFIG_6xx),y)
+CFLAGS		+= -mcpu=powerpc
+endif
+
 cpu-as-$(CONFIG_PPC64BRIDGE)	+= -Wa,-mppc64bridge
 cpu-as-$(CONFIG_4xx)		+= -Wa,-m405
 cpu-as-$(CONFIG_6xx)		+= -Wa,-maltivec
diff --git a/arch/powerpc/configs/cell_defconfig b/arch/powerpc/configs/cell_defconfig
index fe22e54ab2b0..dbe421dc3c11 100644
--- a/arch/powerpc/configs/cell_defconfig
+++ b/arch/powerpc/configs/cell_defconfig
@@ -9,6 +9,7 @@ CONFIG_PPC_MERGE=y
 CONFIG_MMU=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
@@ -55,6 +56,7 @@ CONFIG_SYSCTL=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 # CONFIG_CPUSETS is not set
+# CONFIG_RELAY is not set
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 # CONFIG_EMBEDDED is not set
@@ -69,10 +71,6 @@ CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
 CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -84,7 +82,6 @@ CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
@@ -93,6 +90,7 @@ CONFIG_STOP_MACHINE=y
 #
 # Block layer
 #
+# CONFIG_BLK_DEV_IO_TRACE is not set
 
 #
 # IO Schedulers
@@ -126,6 +124,7 @@ CONFIG_RTAS_FLASH=y
 CONFIG_MMIO_NVRAM=y
 CONFIG_CELL_IIC=y
 # CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
 # CONFIG_CPU_FREQ is not set
 # CONFIG_WANT_EARLY_SERIAL is not set
 
@@ -167,7 +166,6 @@ CONFIG_HAVE_MEMORY_PRESENT=y
 CONFIG_SPARSEMEM_EXTREME=y
 # CONFIG_MEMORY_HOTPLUG is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
 # CONFIG_PPC_64K_PAGES is not set
 CONFIG_SCHED_SMT=y
 CONFIG_PROC_DEVICETREE=y
@@ -184,7 +182,6 @@ CONFIG_GENERIC_ISA_DMA=y
 # CONFIG_PPC_INDIRECT_PCI is not set
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_LEGACY_PROC=y
 # CONFIG_PCI_DEBUG is not set
 
 #
@@ -226,6 +223,7 @@ CONFIG_SYN_COOKIES=y
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
 CONFIG_INET_TUNNEL=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
@@ -242,6 +240,7 @@ CONFIG_IPV6=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
+CONFIG_INET6_XFRM_TUNNEL=m
 CONFIG_INET6_TUNNEL=m
 CONFIG_IPV6_TUNNEL=m
 CONFIG_NETFILTER=y
@@ -632,6 +631,7 @@ CONFIG_SERIAL_NONSTANDARD=y
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
 CONFIG_SERIAL_8250_NR_UARTS=4
 CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_8250_EXTENDED is not set
@@ -717,7 +717,6 @@ CONFIG_I2C_ALGOBIT=y
 # CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_PROSAVAGE is not set
 # CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
@@ -736,9 +735,7 @@ CONFIG_I2C_ALGOBIT=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
 # CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_RTC_X1205_I2C is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@@ -766,10 +763,6 @@ CONFIG_I2C_ALGOBIT=y
 #
 
 #
-# Multimedia Capabilities Port drivers
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -818,6 +811,19 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_MMC is not set
 
 #
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
 # InfiniBand support
 #
 CONFIG_INFINIBAND=y
@@ -834,6 +840,11 @@ CONFIG_INFINIBAND_IPOIB_DEBUG_DATA=y
 #
 
 #
+# Real Time Clock
+#
+# CONFIG_RTC_CLASS is not set
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
@@ -889,7 +900,6 @@ CONFIG_TMPFS=y
 CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
 CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
 # CONFIG_CONFIGFS_FS is not set
 
 #
diff --git a/arch/powerpc/configs/g5_defconfig b/arch/powerpc/configs/g5_defconfig
index 2c3fd2007676..a45627547d03 100644
--- a/arch/powerpc/configs/g5_defconfig
+++ b/arch/powerpc/configs/g5_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16-rc2
-# Fri Feb 10 17:33:08 2006
+# Linux kernel version: 2.6.17-rc1
+# Wed Apr 19 13:24:37 2006
 #
 CONFIG_PPC64=y
 CONFIG_64BIT=y
@@ -9,6 +9,7 @@ CONFIG_PPC_MERGE=y
 CONFIG_MMU=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
@@ -29,6 +30,7 @@ CONFIG_POWER4=y
 CONFIG_PPC_FPU=y
 CONFIG_ALTIVEC=y
 CONFIG_PPC_STD_MMU=y
+CONFIG_VIRT_CPU_ACCOUNTING=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=4
 
@@ -53,6 +55,7 @@ CONFIG_SYSCTL=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 # CONFIG_CPUSETS is not set
+# CONFIG_RELAY is not set
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 # CONFIG_EMBEDDED is not set
@@ -67,10 +70,6 @@ CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
 CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -82,7 +81,6 @@ CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
@@ -91,6 +89,7 @@ CONFIG_STOP_MACHINE=y
 #
 # Block layer
 #
+# CONFIG_BLK_DEV_IO_TRACE is not set
 
 #
 # IO Schedulers
@@ -185,7 +184,6 @@ CONFIG_GENERIC_ISA_DMA=y
 # CONFIG_PPC_INDIRECT_PCI is not set
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_LEGACY_PROC=y
 # CONFIG_PCI_DEBUG is not set
 
 #
@@ -227,6 +225,7 @@ CONFIG_SYN_COOKIES=y
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
 CONFIG_INET_TUNNEL=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
@@ -238,6 +237,8 @@ CONFIG_TCP_CONG_BIC=y
 #
 # CONFIG_IP_VS is not set
 # CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
 
@@ -261,6 +262,7 @@ CONFIG_IP_NF_IRC=m
 CONFIG_IP_NF_TFTP=m
 CONFIG_IP_NF_AMANDA=m
 # CONFIG_IP_NF_PPTP is not set
+# CONFIG_IP_NF_H323 is not set
 CONFIG_IP_NF_QUEUE=m
 
 #
@@ -513,6 +515,7 @@ CONFIG_MD_RAID0=y
 CONFIG_MD_RAID1=y
 CONFIG_MD_RAID10=m
 CONFIG_MD_RAID5=y
+# CONFIG_MD_RAID5_RESHAPE is not set
 CONFIG_MD_RAID6=m
 CONFIG_MD_MULTIPATH=m
 CONFIG_MD_FAULTY=m
@@ -761,7 +764,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 # Watchdog Cards
 #
 # CONFIG_WATCHDOG is not set
-# CONFIG_RTC is not set
 CONFIG_GEN_RTC=y
 # CONFIG_GEN_RTC_X is not set
 # CONFIG_DTLK is not set
@@ -772,6 +774,7 @@ CONFIG_GEN_RTC=y
 # Ftape, the floppy tape device driver
 #
 CONFIG_AGP=m
+# CONFIG_AGP_VIA is not set
 CONFIG_AGP_UNINORTH=m
 # CONFIG_DRM is not set
 CONFIG_RAW_DRIVER=y
@@ -813,7 +816,6 @@ CONFIG_I2C_POWERMAC=y
 # CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_PROSAVAGE is not set
 # CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
@@ -832,9 +834,7 @@ CONFIG_I2C_POWERMAC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
 # CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_RTC_X1205_I2C is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@@ -862,10 +862,6 @@ CONFIG_I2C_POWERMAC=y
 #
 
 #
-# Multimedia Capabilities Port drivers
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -874,6 +870,7 @@ CONFIG_I2C_POWERMAC=y
 # Digital Video Broadcasting Devices
 #
 # CONFIG_DVB is not set
+# CONFIG_USB_DABUSB is not set
 
 #
 # Graphics support
@@ -883,6 +880,7 @@ CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
 CONFIG_FB_MACMODES=y
+CONFIG_FB_FIRMWARE_EDID=y
 CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_TILEBLITTING=y
 # CONFIG_FB_CIRRUS is not set
@@ -901,7 +899,6 @@ CONFIG_FB_NVIDIA=y
 CONFIG_FB_NVIDIA_I2C=y
 # CONFIG_FB_RIVA is not set
 # CONFIG_FB_MATROX is not set
-# CONFIG_FB_RADEON_OLD is not set
 CONFIG_FB_RADEON=y
 CONFIG_FB_RADEON_I2C=y
 # CONFIG_FB_RADEON_DEBUG is not set
@@ -958,9 +955,11 @@ CONFIG_SND_SEQUENCER=m
 CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
 CONFIG_SND_SEQUENCER_OSS=y
 # CONFIG_SND_DYNAMIC_MINORS is not set
 CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
 
@@ -977,6 +976,7 @@ CONFIG_SND_SUPPORT_OLD_API=y
 # PCI devices
 #
 # CONFIG_SND_AD1889 is not set
+# CONFIG_SND_ALS300 is not set
 # CONFIG_SND_ALS4000 is not set
 # CONFIG_SND_ALI5451 is not set
 # CONFIG_SND_ATIIXP is not set
@@ -1009,6 +1009,7 @@ CONFIG_SND_SUPPORT_OLD_API=y
 # CONFIG_SND_MIXART is not set
 # CONFIG_SND_NM256 is not set
 # CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RIPTIDE is not set
 # CONFIG_SND_RME32 is not set
 # CONFIG_SND_RME96 is not set
 # CONFIG_SND_RME9652 is not set
@@ -1041,6 +1042,7 @@ CONFIG_SND_USB_AUDIO=m
 #
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 # CONFIG_USB_DEBUG is not set
 
@@ -1068,7 +1070,6 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 #
 # USB Device Class drivers
 #
-# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
 CONFIG_USB_ACM=m
 CONFIG_USB_PRINTER=y
 
@@ -1126,15 +1127,6 @@ CONFIG_USB_HIDDEV=y
 # CONFIG_USB_MICROTEK is not set
 
 #
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-
-#
-# Video4Linux support is needed for USB Multimedia device support
-#
-
-#
 # USB Network Adapters
 #
 CONFIG_USB_CATC=m
@@ -1194,6 +1186,7 @@ CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
 CONFIG_USB_SERIAL_KLSI=m
 CONFIG_USB_SERIAL_KOBIL_SCT=m
 CONFIG_USB_SERIAL_MCT_U232=m
+# CONFIG_USB_SERIAL_NAVMAN is not set
 CONFIG_USB_SERIAL_PL2303=m
 # CONFIG_USB_SERIAL_HP4X is not set
 CONFIG_USB_SERIAL_SAFE=m
@@ -1237,17 +1230,23 @@ CONFIG_USB_EZUSB=y
 # CONFIG_MMC is not set
 
 #
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
 # InfiniBand support
 #
 # CONFIG_INFINIBAND is not set
 
 #
-# SN Devices
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
 #
 
 #
-# EDAC - error detection and reporting (RAS)
+# Real Time Clock
 #
+# CONFIG_RTC_CLASS is not set
 
 #
 # File systems
@@ -1319,7 +1318,6 @@ CONFIG_TMPFS=y
 CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
 CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
 # CONFIG_CONFIGFS_FS is not set
 
 #
diff --git a/arch/powerpc/configs/iseries_defconfig b/arch/powerpc/configs/iseries_defconfig
index 1816a46742f6..a95e455a1944 100644
--- a/arch/powerpc/configs/iseries_defconfig
+++ b/arch/powerpc/configs/iseries_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16-rc6
-# Wed Mar 15 16:19:52 2006
+# Linux kernel version: 2.6.17-rc1
+# Wed Apr 19 11:46:44 2006
 #
 CONFIG_PPC64=y
 CONFIG_64BIT=y
@@ -9,6 +9,7 @@ CONFIG_PPC_MERGE=y
 CONFIG_MMU=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
@@ -30,6 +31,7 @@ CONFIG_POWER4=y
 CONFIG_PPC_FPU=y
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
+CONFIG_VIRT_CPU_ACCOUNTING=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=32
 
@@ -55,6 +57,7 @@ CONFIG_AUDITSYSCALL=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 # CONFIG_CPUSETS is not set
+# CONFIG_RELAY is not set
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 # CONFIG_EMBEDDED is not set
@@ -69,10 +72,6 @@ CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
 CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -84,7 +83,6 @@ CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
@@ -93,6 +91,7 @@ CONFIG_STOP_MACHINE=y
 #
 # Block layer
 #
+# CONFIG_BLK_DEV_IO_TRACE is not set
 
 #
 # IO Schedulers
@@ -165,7 +164,6 @@ CONFIG_GENERIC_ISA_DMA=y
 # CONFIG_PPC_INDIRECT_PCI is not set
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_LEGACY_PROC=y
 # CONFIG_PCI_DEBUG is not set
 
 #
@@ -207,6 +205,7 @@ CONFIG_SYN_COOKIES=y
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
 CONFIG_INET_TUNNEL=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
@@ -218,6 +217,8 @@ CONFIG_TCP_CONG_BIC=y
 #
 # CONFIG_IP_VS is not set
 # CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
 
@@ -236,11 +237,14 @@ CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
 CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
 CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
 # CONFIG_NETFILTER_XT_MATCH_DCCP is not set
+# CONFIG_NETFILTER_XT_MATCH_ESP is not set
 CONFIG_NETFILTER_XT_MATCH_HELPER=m
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
 CONFIG_NETFILTER_XT_MATCH_MAC=m
 CONFIG_NETFILTER_XT_MATCH_MARK=m
+# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
+# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
 CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
 CONFIG_NETFILTER_XT_MATCH_REALM=m
 CONFIG_NETFILTER_XT_MATCH_SCTP=m
@@ -262,20 +266,19 @@ CONFIG_IP_NF_IRC=m
 CONFIG_IP_NF_TFTP=m
 CONFIG_IP_NF_AMANDA=m
 # CONFIG_IP_NF_PPTP is not set
+# CONFIG_IP_NF_H323 is not set
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
 CONFIG_IP_NF_MATCH_TOS=m
 CONFIG_IP_NF_MATCH_RECENT=m
 CONFIG_IP_NF_MATCH_ECN=m
 CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
+# CONFIG_IP_NF_MATCH_AH is not set
 CONFIG_IP_NF_MATCH_TTL=m
 CONFIG_IP_NF_MATCH_OWNER=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
 CONFIG_IP_NF_MATCH_HASHLIMIT=m
-CONFIG_IP_NF_MATCH_POLICY=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
@@ -479,6 +482,7 @@ CONFIG_MD_RAID0=y
 CONFIG_MD_RAID1=y
 CONFIG_MD_RAID10=m
 CONFIG_MD_RAID5=y
+# CONFIG_MD_RAID5_RESHAPE is not set
 CONFIG_MD_RAID6=m
 CONFIG_MD_MULTIPATH=m
 CONFIG_MD_FAULTY=m
@@ -702,7 +706,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 # Watchdog Cards
 #
 # CONFIG_WATCHDOG is not set
-# CONFIG_RTC is not set
 CONFIG_GEN_RTC=y
 # CONFIG_GEN_RTC_X is not set
 # CONFIG_DTLK is not set
@@ -751,10 +754,6 @@ CONFIG_MAX_RAW_DEVS=256
 #
 
 #
-# Multimedia Capabilities Port drivers
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -779,6 +778,7 @@ CONFIG_MAX_RAW_DEVS=256
 #
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
 
 #
@@ -796,6 +796,11 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_MMC is not set
 
 #
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
 # InfiniBand support
 #
 # CONFIG_INFINIBAND is not set
@@ -805,6 +810,11 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 #
 
 #
+# Real Time Clock
+#
+# CONFIG_RTC_CLASS is not set
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
@@ -878,7 +888,6 @@ CONFIG_TMPFS=y
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
 # CONFIG_CONFIGFS_FS is not set
 
 #
diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig
index daaf038a1faa..58e68ce09b0f 100644
--- a/arch/powerpc/configs/pseries_defconfig
+++ b/arch/powerpc/configs/pseries_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16-rc2
-# Fri Feb 10 17:33:32 2006
+# Linux kernel version: 2.6.17-rc1
+# Wed Apr 19 11:48:00 2006
 #
 CONFIG_PPC64=y
 CONFIG_64BIT=y
@@ -9,6 +9,7 @@ CONFIG_PPC_MERGE=y
 CONFIG_MMU=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
@@ -30,6 +31,7 @@ CONFIG_POWER4=y
 CONFIG_PPC_FPU=y
 CONFIG_ALTIVEC=y
 CONFIG_PPC_STD_MMU=y
+CONFIG_VIRT_CPU_ACCOUNTING=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=128
 
@@ -55,6 +57,7 @@ CONFIG_AUDITSYSCALL=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_CPUSETS=y
+# CONFIG_RELAY is not set
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 # CONFIG_EMBEDDED is not set
@@ -69,10 +72,6 @@ CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
 CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -84,7 +83,6 @@ CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
@@ -93,6 +91,7 @@ CONFIG_STOP_MACHINE=y
 #
 # Block layer
 #
+# CONFIG_BLK_DEV_IO_TRACE is not set
 
 #
 # IO Schedulers
@@ -188,7 +187,6 @@ CONFIG_PPC_I8259=y
 # CONFIG_PPC_INDIRECT_PCI is not set
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_LEGACY_PROC=y
 # CONFIG_PCI_DEBUG is not set
 
 #
@@ -235,6 +233,7 @@ CONFIG_SYN_COOKIES=y
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
 CONFIG_INET_TUNNEL=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
@@ -246,6 +245,8 @@ CONFIG_TCP_CONG_BIC=y
 #
 # CONFIG_IP_VS is not set
 # CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
 
@@ -272,6 +273,7 @@ CONFIG_IP_NF_IRC=m
 CONFIG_IP_NF_TFTP=m
 CONFIG_IP_NF_AMANDA=m
 # CONFIG_IP_NF_PPTP is not set
+# CONFIG_IP_NF_H323 is not set
 CONFIG_IP_NF_QUEUE=m
 
 #
@@ -519,6 +521,7 @@ CONFIG_MD_RAID0=y
 CONFIG_MD_RAID1=y
 CONFIG_MD_RAID10=m
 CONFIG_MD_RAID5=y
+# CONFIG_MD_RAID5_RESHAPE is not set
 CONFIG_MD_RAID6=m
 CONFIG_MD_MULTIPATH=m
 CONFIG_MD_FAULTY=m
@@ -750,6 +753,7 @@ CONFIG_HW_CONSOLE=y
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
 CONFIG_SERIAL_8250_NR_UARTS=4
 CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_8250_EXTENDED is not set
@@ -767,7 +771,9 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_PRINTER is not set
 # CONFIG_PPDEV is not set
 # CONFIG_TIPAR is not set
+CONFIG_HVC_DRIVER=y
 CONFIG_HVC_CONSOLE=y
+# CONFIG_HVC_RTAS is not set
 CONFIG_HVCS=m
 
 #
@@ -779,7 +785,6 @@ CONFIG_HVCS=m
 # Watchdog Cards
 #
 # CONFIG_WATCHDOG is not set
-# CONFIG_RTC is not set
 CONFIG_GEN_RTC=y
 # CONFIG_GEN_RTC_X is not set
 # CONFIG_DTLK is not set
@@ -830,7 +835,6 @@ CONFIG_I2C_ALGOBIT=y
 # CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_PROSAVAGE is not set
 # CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
@@ -849,9 +853,7 @@ CONFIG_I2C_ALGOBIT=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
 # CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_RTC_X1205_I2C is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@@ -879,10 +881,6 @@ CONFIG_I2C_ALGOBIT=y
 #
 
 #
-# Multimedia Capabilities Port drivers
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -891,6 +889,7 @@ CONFIG_I2C_ALGOBIT=y
 # Digital Video Broadcasting Devices
 #
 # CONFIG_DVB is not set
+# CONFIG_USB_DABUSB is not set
 
 #
 # Graphics support
@@ -900,6 +899,7 @@ CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
 CONFIG_FB_MACMODES=y
+CONFIG_FB_FIRMWARE_EDID=y
 CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_TILEBLITTING=y
 # CONFIG_FB_CIRRUS is not set
@@ -919,7 +919,6 @@ CONFIG_FB_MATROX_MYSTIQUE=y
 CONFIG_FB_MATROX_G=y
 # CONFIG_FB_MATROX_I2C is not set
 CONFIG_FB_MATROX_MULTIHEAD=y
-# CONFIG_FB_RADEON_OLD is not set
 CONFIG_FB_RADEON=y
 CONFIG_FB_RADEON_I2C=y
 # CONFIG_FB_RADEON_DEBUG is not set
@@ -968,6 +967,7 @@ CONFIG_LCD_DEVICE=y
 #
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 # CONFIG_USB_DEBUG is not set
 
@@ -1048,15 +1048,6 @@ CONFIG_USB_HIDDEV=y
 # CONFIG_USB_MICROTEK is not set
 
 #
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-
-#
-# Video4Linux support is needed for USB Multimedia device support
-#
-
-#
 # USB Network Adapters
 #
 # CONFIG_USB_CATC is not set
@@ -1109,6 +1100,11 @@ CONFIG_USB_MON=y
 # CONFIG_MMC is not set
 
 #
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
 # InfiniBand support
 #
 CONFIG_INFINIBAND=m
@@ -1121,12 +1117,13 @@ CONFIG_INFINIBAND_IPOIB=m
 # CONFIG_INFINIBAND_SRP is not set
 
 #
-# SN Devices
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
 #
 
 #
-# EDAC - error detection and reporting (RAS)
+# Real Time Clock
 #
+# CONFIG_RTC_CLASS is not set
 
 #
 # File systems
@@ -1202,7 +1199,6 @@ CONFIG_TMPFS=y
 CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
 CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
 # CONFIG_CONFIGFS_FS is not set
 
 #
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index 0cc0995b81b0..803858e86160 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -20,7 +20,7 @@ obj-$(CONFIG_PPC64)		+= setup_64.o binfmt_elf32.o sys_ppc32.o \
 				   firmware.o sysfs.o
 obj-$(CONFIG_PPC64)		+= vdso64/
 obj-$(CONFIG_ALTIVEC)		+= vecemu.o vector.o
-obj-$(CONFIG_POWER4)		+= idle_power4.o
+obj-$(CONFIG_PPC_970_NAP)	+= idle_power4.o
 obj-$(CONFIG_PPC_OF)		+= of_device.o prom_parse.o
 procfs-$(CONFIG_PPC64)		:= proc_ppc64.o
 obj-$(CONFIG_PROC_FS)		+= $(procfs-y)
diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
index 54b48f330051..8f85c5e8a55a 100644
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -91,6 +91,7 @@ int main(void)
 #endif /* CONFIG_PPC64 */
 
 	DEFINE(TI_FLAGS, offsetof(struct thread_info, flags));
+	DEFINE(TI_LOCAL_FLAGS, offsetof(struct thread_info, local_flags));
 	DEFINE(TI_PREEMPT, offsetof(struct thread_info, preempt_count));
 	DEFINE(TI_TASK, offsetof(struct thread_info, task));
 #ifdef CONFIG_PPC32
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index 39e348a3ade2..3f7182db9ed5 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -57,6 +57,8 @@ extern void __setup_cpu_ppc970(unsigned long offset, struct cpu_spec* spec);
 				 PPC_FEATURE_SMT | PPC_FEATURE_ICACHE_SNOOP)
 #define COMMON_USER_POWER5_PLUS	(COMMON_USER_PPC64 | PPC_FEATURE_POWER5_PLUS|\
 				 PPC_FEATURE_SMT | PPC_FEATURE_ICACHE_SNOOP)
+#define COMMON_USER_POWER6	(COMMON_USER_PPC64 | PPC_FEATURE_ARCH_2_05 |\
+				 PPC_FEATURE_SMT | PPC_FEATURE_ICACHE_SNOOP)
 #define COMMON_USER_BOOKE	(PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU | \
 				 PPC_FEATURE_BOOKE)
 
@@ -263,6 +265,20 @@ struct cpu_spec	cpu_specs[] = {
 		.oprofile_type		= PPC_OPROFILE_POWER4,
 		.platform		= "power5+",
 	},
+	{	/* Power6 */
+		.pvr_mask		= 0xffff0000,
+		.pvr_value		= 0x003e0000,
+		.cpu_name		= "POWER6",
+		.cpu_features		= CPU_FTRS_POWER6,
+		.cpu_user_features	= COMMON_USER_POWER6,
+		.icache_bsize		= 128,
+		.dcache_bsize		= 128,
+		.num_pmcs		= 6,
+		.cpu_setup		= __setup_cpu_power4,
+		.oprofile_cpu_type	= "ppc64/power6",
+		.oprofile_type		= PPC_OPROFILE_POWER4,
+		.platform		= "power6",
+	},
 	{	/* Cell Broadband Engine */
 		.pvr_mask		= 0xffff0000,
 		.pvr_value		= 0x00700000,
diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S
index b3a979467225..8866fd26c6b9 100644
--- a/arch/powerpc/kernel/entry_32.S
+++ b/arch/powerpc/kernel/entry_32.S
@@ -128,37 +128,36 @@ transfer_to_handler:
 	stw	r12,4(r11)
 #endif
 	b	3f
+
 2:	/* if from kernel, check interrupted DOZE/NAP mode and
          * check for stack overflow
          */
+	lwz	r9,THREAD_INFO-THREAD(r12)
+	cmplw	r1,r9			/* if r1 <= current->thread_info */
+	ble-	stack_ovf		/* then the kernel stack overflowed */
+5:
 #ifdef CONFIG_6xx
-	mfspr	r11,SPRN_HID0
-	mtcr	r11
-BEGIN_FTR_SECTION
-	bt-	8,4f			/* Check DOZE */
-END_FTR_SECTION_IFSET(CPU_FTR_CAN_DOZE)
-BEGIN_FTR_SECTION
-	bt-	9,4f			/* Check NAP */
-END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP)
+	tophys(r9,r9)			/* check local flags */
+	lwz	r12,TI_LOCAL_FLAGS(r9)
+	mtcrf	0x01,r12
+	bt-	31-TLF_NAPPING,4f
 #endif /* CONFIG_6xx */
 	.globl transfer_to_handler_cont
 transfer_to_handler_cont:
-	lwz	r11,THREAD_INFO-THREAD(r12)
-	cmplw	r1,r11			/* if r1 <= current->thread_info */
-	ble-	stack_ovf		/* then the kernel stack overflowed */
 3:
 	mflr	r9
 	lwz	r11,0(r9)		/* virtual address of handler */
 	lwz	r9,4(r9)		/* where to go when done */
-	FIX_SRR1(r10,r12)
 	mtspr	SPRN_SRR0,r11
 	mtspr	SPRN_SRR1,r10
 	mtlr	r9
 	SYNC
 	RFI				/* jump to handler, enable MMU */
 
-#ifdef CONFIG_6xx	
-4:	b	power_save_6xx_restore
+#ifdef CONFIG_6xx
+4:	rlwinm	r12,r12,0,~_TLF_NAPPING
+	stw	r12,TI_LOCAL_FLAGS(r9)
+	b	power_save_6xx_restore
 #endif
 
 /*
@@ -167,10 +166,10 @@ transfer_to_handler_cont:
  */
 stack_ovf:
 	/* sometimes we use a statically-allocated stack, which is OK. */
-	lis	r11,_end@h
-	ori	r11,r11,_end@l
-	cmplw	r1,r11
-	ble	3b			/* r1 <= &_end is OK */
+	lis	r12,_end@h
+	ori	r12,r12,_end@l
+	cmplw	r1,r12
+	ble	5b			/* r1 <= &_end is OK */
 	SAVE_NVGPRS(r11)
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	lis	r1,init_thread_union@ha
diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index a5ae04a57c78..b7d140430a41 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -376,11 +376,28 @@ label##_common:						\
 	bl	hdlr;					\
 	b	.ret_from_except
 
+/*
+ * Like STD_EXCEPTION_COMMON, but for exceptions that can occur
+ * in the idle task and therefore need the special idle handling.
+ */
+#define STD_EXCEPTION_COMMON_IDLE(trap, label, hdlr)	\
+	.align	7;					\
+	.globl label##_common;				\
+label##_common:						\
+	EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN);	\
+	FINISH_NAP;					\
+	DISABLE_INTS;					\
+	bl	.save_nvgprs;				\
+	addi	r3,r1,STACK_FRAME_OVERHEAD;		\
+	bl	hdlr;					\
+	b	.ret_from_except
+
 #define STD_EXCEPTION_COMMON_LITE(trap, label, hdlr)	\
 	.align	7;					\
 	.globl label##_common;				\
 label##_common:						\
 	EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN);	\
+	FINISH_NAP;					\
 	DISABLE_INTS;					\
 	bl	.ppc64_runlatch_on;			\
 	addi	r3,r1,STACK_FRAME_OVERHEAD;		\
@@ -388,6 +405,25 @@ label##_common:						\
 	b	.ret_from_except_lite
 
 /*
+ * When the idle code in power4_idle puts the CPU into NAP mode,
+ * it has to do so in a loop, and relies on the external interrupt
+ * and decrementer interrupt entry code to get it out of the loop.
+ * It sets the _TLF_NAPPING bit in current_thread_info()->local_flags
+ * to signal that it is in the loop and needs help to get out.
+ */
+#ifdef CONFIG_PPC_970_NAP
+#define FINISH_NAP				\
+BEGIN_FTR_SECTION				\
+	clrrdi	r11,r1,THREAD_SHIFT;		\
+	ld	r9,TI_LOCAL_FLAGS(r11);		\
+	andi.	r10,r9,_TLF_NAPPING;		\
+	bnel	power4_fixup_nap;		\
+END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP)
+#else
+#define FINISH_NAP
+#endif
+
+/*
  * Start of pSeries system interrupt routines
  */
 	. = 0x100
@@ -772,6 +808,7 @@ hardware_interrupt_iSeries_masked:
 	.globl machine_check_common
 machine_check_common:
 	EXCEPTION_PROLOG_COMMON(0x200, PACA_EXMC)
+	FINISH_NAP
 	DISABLE_INTS
 	bl	.save_nvgprs
 	addi	r3,r1,STACK_FRAME_OVERHEAD
@@ -783,7 +820,7 @@ machine_check_common:
 	STD_EXCEPTION_COMMON(0xb00, trap_0b, .unknown_exception)
 	STD_EXCEPTION_COMMON(0xd00, single_step, .single_step_exception)
 	STD_EXCEPTION_COMMON(0xe00, trap_0e, .unknown_exception)
-	STD_EXCEPTION_COMMON(0xf00, performance_monitor, .performance_monitor_exception)
+	STD_EXCEPTION_COMMON_IDLE(0xf00, performance_monitor, .performance_monitor_exception)
 	STD_EXCEPTION_COMMON(0x1300, instruction_breakpoint, .instruction_breakpoint_exception)
 #ifdef CONFIG_ALTIVEC
 	STD_EXCEPTION_COMMON(0x1700, altivec_assist, .altivec_assist_exception)
@@ -1034,6 +1071,7 @@ unrecov_slb:
 	.globl hardware_interrupt_entry
 hardware_interrupt_common:
 	EXCEPTION_PROLOG_COMMON(0x500, PACA_EXGEN)
+	FINISH_NAP
 hardware_interrupt_entry:
 	DISABLE_INTS
 	bl	.ppc64_runlatch_on
@@ -1041,6 +1079,15 @@ hardware_interrupt_entry:
 	bl	.do_IRQ
 	b	.ret_from_except_lite
 
+#ifdef CONFIG_PPC_970_NAP
+power4_fixup_nap:
+	andc	r9,r9,r10
+	std	r9,TI_LOCAL_FLAGS(r11)
+	ld	r10,_LINK(r1)		/* make idle task do the */
+	std	r10,_NIP(r1)		/* equivalent of a blr */
+	blr
+#endif
+
 	.align	7
 	.globl alignment_common
 alignment_common:
diff --git a/arch/powerpc/kernel/idle.c b/arch/powerpc/kernel/idle.c
index e9f321d74d85..d491052c8e0c 100644
--- a/arch/powerpc/kernel/idle.c
+++ b/arch/powerpc/kernel/idle.c
@@ -50,9 +50,9 @@ void cpu_idle(void)
 
 	set_thread_flag(TIF_POLLING_NRFLAG);
 	while (1) {
-		ppc64_runlatch_off();
-
 		while (!need_resched() && !cpu_should_die()) {
+			ppc64_runlatch_off();
+
 			if (ppc_md.power_save) {
 				clear_thread_flag(TIF_POLLING_NRFLAG);
 				/*
diff --git a/arch/powerpc/kernel/idle_6xx.S b/arch/powerpc/kernel/idle_6xx.S
index 12a4efbaa08f..b45fa0e37212 100644
--- a/arch/powerpc/kernel/idle_6xx.S
+++ b/arch/powerpc/kernel/idle_6xx.S
@@ -22,8 +22,6 @@
 #include <asm/ppc_asm.h>
 #include <asm/asm-offsets.h>
 
-#undef DEBUG
-
 	.text
 
 /*
@@ -109,12 +107,6 @@ BEGIN_FTR_SECTION
 	dcbf	0,r4
 	dcbf	0,r4
 END_FTR_SECTION_IFSET(CPU_FTR_NAP_DISABLE_L2_PR)
-#ifdef DEBUG
-	lis	r6,nap_enter_count@ha
-	lwz	r4,nap_enter_count@l(r6)
-	addi	r4,r4,1
-	stw	r4,nap_enter_count@l(r6)
-#endif	
 2:
 BEGIN_FTR_SECTION
 	/* Go to low speed mode on some 750FX */
@@ -144,48 +136,42 @@ BEGIN_FTR_SECTION
 	DSSALL
 	sync
 END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
+	rlwinm	r9,r1,0,0,31-THREAD_SHIFT	/* current thread_info */
+	lwz	r8,TI_LOCAL_FLAGS(r9)	/* set napping bit */
+	ori	r8,r8,_TLF_NAPPING	/* so when we take an exception */
+	stw	r8,TI_LOCAL_FLAGS(r9)	/* it will return to our caller */
 	mfmsr	r7
 	ori	r7,r7,MSR_EE
 	oris	r7,r7,MSR_POW@h
-	sync
-	isync
+1:	sync
 	mtmsr	r7
 	isync
-	sync
-	blr
-	
+	b	1b
+
 /*
  * Return from NAP/DOZE mode, restore some CPU specific registers,
  * we are called with DR/IR still off and r2 containing physical
- * address of current.
+ * address of current.  R11 points to the exception frame (physical
+ * address).  We have to preserve r10.
  */
 _GLOBAL(power_save_6xx_restore)
-	mfspr	r11,SPRN_HID0
-	rlwinm.	r11,r11,0,10,8	/* Clear NAP & copy NAP bit !state to cr1 EQ */
-	cror	4*cr1+eq,4*cr0+eq,4*cr0+eq
-BEGIN_FTR_SECTION
-	rlwinm	r11,r11,0,9,7	/* Clear DOZE */
-END_FTR_SECTION_IFSET(CPU_FTR_CAN_DOZE)
-	mtspr	SPRN_HID0, r11
+	lwz	r9,_LINK(r11)		/* interrupted in ppc6xx_idle: */
+	stw	r9,_NIP(r11)		/* make it do a blr */
 
-#ifdef DEBUG
-	beq	cr1,1f
-	lis	r11,(nap_return_count-KERNELBASE)@ha
-	lwz	r9,nap_return_count@l(r11)
-	addi	r9,r9,1
-	stw	r9,nap_return_count@l(r11)
-1:
-#endif
-	
-	rlwinm	r9,r1,0,0,18
-	tophys(r9,r9)
-	lwz	r11,TI_CPU(r9)
+#ifdef CONFIG_SMP
+	mfspr	r12,SPRN_SPRG3
+	lwz	r11,TI_CPU(r12)		/* get cpu number * 4 */
 	slwi	r11,r11,2
+#else
+	li	r11,0
+#endif
 	/* Todo make sure all these are in the same page
-	 * and load r22 (@ha part + CPU offset) only once
+	 * and load r11 (@ha part + CPU offset) only once
 	 */
 BEGIN_FTR_SECTION
-	beq	cr1,1f
+	mfspr	r9,SPRN_HID0
+	andis.	r9,r9,HID0_NAP@h
+	beq	1f
 	addis	r9,r11,(nap_save_msscr0-KERNELBASE)@ha
 	lwz	r9,nap_save_msscr0@l(r9)
 	mtspr	SPRN_MSSCR0, r9
@@ -210,10 +196,3 @@ _GLOBAL(nap_save_hid1)
 
 _GLOBAL(powersave_lowspeed)
 	.long	0
-
-#ifdef DEBUG
-_GLOBAL(nap_enter_count)
-	.space	4
-_GLOBAL(nap_return_count)
-	.space	4
-#endif
diff --git a/arch/powerpc/kernel/idle_power4.S b/arch/powerpc/kernel/idle_power4.S
index 6dad1c02496e..d85c7c938eed 100644
--- a/arch/powerpc/kernel/idle_power4.S
+++ b/arch/powerpc/kernel/idle_power4.S
@@ -35,12 +35,16 @@ BEGIN_FTR_SECTION
 	DSSALL
 	sync
 END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
+	clrrdi	r9,r1,THREAD_SHIFT	/* current thread_info */
+	ld	r8,TI_LOCAL_FLAGS(r9)	/* set napping bit */
+	ori	r8,r8,_TLF_NAPPING	/* so when we take an exception */
+	std	r8,TI_LOCAL_FLAGS(r9)	/* it will return to our caller */
 	mfmsr	r7
 	ori	r7,r7,MSR_EE
 	oris	r7,r7,MSR_POW@h
-	sync
+1:	sync
 	isync
 	mtmsrd	r7
 	isync
-	sync
-	blr
+	b	1b
+
diff --git a/arch/powerpc/kernel/iommu.c b/arch/powerpc/kernel/iommu.c
index d9a7fdef59b9..4eba60a32890 100644
--- a/arch/powerpc/kernel/iommu.c
+++ b/arch/powerpc/kernel/iommu.c
@@ -61,6 +61,7 @@ __setup("iommu=", setup_iommu);
 static unsigned long iommu_range_alloc(struct iommu_table *tbl,
                                        unsigned long npages,
                                        unsigned long *handle,
+                                       unsigned long mask,
                                        unsigned int align_order)
 { 
 	unsigned long n, end, i, start;
@@ -97,9 +98,21 @@ static unsigned long iommu_range_alloc(struct iommu_table *tbl,
 	 */
 	if (start >= limit)
 		start = largealloc ? tbl->it_largehint : tbl->it_hint;
-	
+
  again:
 
+	if (limit + tbl->it_offset > mask) {
+		limit = mask - tbl->it_offset + 1;
+		/* If we're constrained on address range, first try
+		 * at the masked hint to avoid O(n) search complexity,
+		 * but on second pass, start at 0.
+		 */
+		if ((start & mask) >= limit || pass > 0)
+			start = 0;
+		else
+			start &= mask;
+	}
+
 	n = find_next_zero_bit(tbl->it_map, limit, start);
 
 	/* Align allocation */
@@ -150,14 +163,14 @@ static unsigned long iommu_range_alloc(struct iommu_table *tbl,
 
 static dma_addr_t iommu_alloc(struct iommu_table *tbl, void *page,
 		       unsigned int npages, enum dma_data_direction direction,
-		       unsigned int align_order)
+		       unsigned long mask, unsigned int align_order)
 {
 	unsigned long entry, flags;
 	dma_addr_t ret = DMA_ERROR_CODE;
-	
+
 	spin_lock_irqsave(&(tbl->it_lock), flags);
 
-	entry = iommu_range_alloc(tbl, npages, NULL, align_order);
+	entry = iommu_range_alloc(tbl, npages, NULL, mask, align_order);
 
 	if (unlikely(entry == DMA_ERROR_CODE)) {
 		spin_unlock_irqrestore(&(tbl->it_lock), flags);
@@ -236,7 +249,7 @@ static void iommu_free(struct iommu_table *tbl, dma_addr_t dma_addr,
 
 int iommu_map_sg(struct device *dev, struct iommu_table *tbl,
 		struct scatterlist *sglist, int nelems,
-		enum dma_data_direction direction)
+		unsigned long mask, enum dma_data_direction direction)
 {
 	dma_addr_t dma_next = 0, dma_addr;
 	unsigned long flags;
@@ -274,7 +287,7 @@ int iommu_map_sg(struct device *dev, struct iommu_table *tbl,
 		vaddr = (unsigned long)page_address(s->page) + s->offset;
 		npages = PAGE_ALIGN(vaddr + slen) - (vaddr & PAGE_MASK);
 		npages >>= PAGE_SHIFT;
-		entry = iommu_range_alloc(tbl, npages, &handle, 0);
+		entry = iommu_range_alloc(tbl, npages, &handle, mask >> PAGE_SHIFT, 0);
 
 		DBG("  - vaddr: %lx, size: %lx\n", vaddr, slen);
 
@@ -479,7 +492,8 @@ void iommu_free_table(struct device_node *dn)
  * byte within the page as vaddr.
  */
 dma_addr_t iommu_map_single(struct iommu_table *tbl, void *vaddr,
-		size_t size, enum dma_data_direction direction)
+		size_t size, unsigned long mask,
+		enum dma_data_direction direction)
 {
 	dma_addr_t dma_handle = DMA_ERROR_CODE;
 	unsigned long uaddr;
@@ -492,7 +506,8 @@ dma_addr_t iommu_map_single(struct iommu_table *tbl, void *vaddr,
 	npages >>= PAGE_SHIFT;
 
 	if (tbl) {
-		dma_handle = iommu_alloc(tbl, vaddr, npages, direction, 0);
+		dma_handle = iommu_alloc(tbl, vaddr, npages, direction,
+					 mask >> PAGE_SHIFT, 0);
 		if (dma_handle == DMA_ERROR_CODE) {
 			if (printk_ratelimit())  {
 				printk(KERN_INFO "iommu_alloc failed, "
@@ -521,7 +536,7 @@ void iommu_unmap_single(struct iommu_table *tbl, dma_addr_t dma_handle,
  * to the dma address (mapping) of the first page.
  */
 void *iommu_alloc_coherent(struct iommu_table *tbl, size_t size,
-		dma_addr_t *dma_handle, gfp_t flag)
+		dma_addr_t *dma_handle, unsigned long mask, gfp_t flag)
 {
 	void *ret = NULL;
 	dma_addr_t mapping;
@@ -551,7 +566,8 @@ void *iommu_alloc_coherent(struct iommu_table *tbl, size_t size,
 	memset(ret, 0, size);
 
 	/* Set up tces to cover the allocated range */
-	mapping = iommu_alloc(tbl, ret, npages, DMA_BIDIRECTIONAL, order);
+	mapping = iommu_alloc(tbl, ret, npages, DMA_BIDIRECTIONAL,
+			      mask >> PAGE_SHIFT, order);
 	if (mapping == DMA_ERROR_CODE) {
 		free_pages((unsigned long)ret, order);
 		ret = NULL;
diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
index bb5c9501234c..57d560c68897 100644
--- a/arch/powerpc/kernel/irq.c
+++ b/arch/powerpc/kernel/irq.c
@@ -272,18 +272,26 @@ unsigned int virt_irq_to_real_map[NR_IRQS];
  * Don't use virtual irqs 0, 1, 2 for devices.
  * The pcnet32 driver considers interrupt numbers < 2 to be invalid,
  * and 2 is the XICS IPI interrupt.
- * We limit virtual irqs to 17 less than NR_IRQS so that when we
- * offset them by 16 (to reserve the first 16 for ISA interrupts)
- * we don't end up with an interrupt number >= NR_IRQS.
+ * We limit virtual irqs to __irq_offet_value less than virt_irq_max so
+ * that when we offset them we don't end up with an interrupt
+ * number >= virt_irq_max.
  */
 #define MIN_VIRT_IRQ	3
-#define MAX_VIRT_IRQ	(NR_IRQS - NUM_ISA_INTERRUPTS - 1)
-#define NR_VIRT_IRQS	(MAX_VIRT_IRQ - MIN_VIRT_IRQ + 1)
+
+unsigned int virt_irq_max;
+static unsigned int max_virt_irq;
+static unsigned int nr_virt_irqs;
 
 void
 virt_irq_init(void)
 {
 	int i;
+
+	if ((virt_irq_max == 0) || (virt_irq_max > (NR_IRQS - 1)))
+		virt_irq_max = NR_IRQS - 1;
+	max_virt_irq = virt_irq_max - __irq_offset_value;
+	nr_virt_irqs = max_virt_irq - MIN_VIRT_IRQ + 1;
+
 	for (i = 0; i < NR_IRQS; i++)
 		virt_irq_to_real_map[i] = UNDEFINED_IRQ;
 }
@@ -308,17 +316,17 @@ int virt_irq_create_mapping(unsigned int real_irq)
 		return real_irq;
 	}
 
-	/* map to a number between MIN_VIRT_IRQ and MAX_VIRT_IRQ */
+	/* map to a number between MIN_VIRT_IRQ and max_virt_irq */
 	virq = real_irq;
-	if (virq > MAX_VIRT_IRQ)
-		virq = (virq % NR_VIRT_IRQS) + MIN_VIRT_IRQ;
+	if (virq > max_virt_irq)
+		virq = (virq % nr_virt_irqs) + MIN_VIRT_IRQ;
 
 	/* search for this number or a free slot */
 	first_virq = virq;
 	while (virt_irq_to_real_map[virq] != UNDEFINED_IRQ) {
 		if (virt_irq_to_real_map[virq] == real_irq)
 			return virq;
-		if (++virq > MAX_VIRT_IRQ)
+		if (++virq > max_virt_irq)
 			virq = MIN_VIRT_IRQ;
 		if (virq == first_virq)
 			goto nospace;	/* oops, no free slots */
@@ -330,8 +338,8 @@ int virt_irq_create_mapping(unsigned int real_irq)
  nospace:
 	if (!warned) {
 		printk(KERN_CRIT "Interrupt table is full\n");
-		printk(KERN_CRIT "Increase NR_IRQS (currently %d) "
-		       "in your kernel sources and rebuild.\n", NR_IRQS);
+		printk(KERN_CRIT "Increase virt_irq_max (currently %d) "
+		       "in your kernel sources and rebuild.\n", virt_irq_max);
 		warned = 1;
 	}
 	return NO_IRQ;
@@ -349,8 +357,8 @@ unsigned int real_irq_to_virt_slowpath(unsigned int real_irq)
 
 	virq = real_irq;
 
-	if (virq > MAX_VIRT_IRQ)
-		virq = (virq % NR_VIRT_IRQS) + MIN_VIRT_IRQ;
+	if (virq > max_virt_irq)
+		virq = (virq % nr_virt_irqs) + MIN_VIRT_IRQ;
 
 	first_virq = virq;
 
@@ -360,7 +368,7 @@ unsigned int real_irq_to_virt_slowpath(unsigned int real_irq)
 
 		virq++;
 
-		if (virq >= MAX_VIRT_IRQ)
+		if (virq >= max_virt_irq)
 			virq = 0;
 
 	} while (first_virq != virq);
diff --git a/arch/powerpc/kernel/kprobes.c b/arch/powerpc/kernel/kprobes.c
index ad7a90212204..f78866367b70 100644
--- a/arch/powerpc/kernel/kprobes.c
+++ b/arch/powerpc/kernel/kprobes.c
@@ -88,34 +88,34 @@ void __kprobes arch_remove_kprobe(struct kprobe *p)
 	mutex_unlock(&kprobe_mutex);
 }
 
-static inline void prepare_singlestep(struct kprobe *p, struct pt_regs *regs)
+static void __kprobes prepare_singlestep(struct kprobe *p, struct pt_regs *regs)
 {
-	kprobe_opcode_t insn = *p->ainsn.insn;
-
 	regs->msr |= MSR_SE;
 
-	/* single step inline if it is a trap variant */
-	if (is_trap(insn))
-		regs->nip = (unsigned long)p->addr;
-	else
-		regs->nip = (unsigned long)p->ainsn.insn;
+	/*
+	 * On powerpc we should single step on the original
+	 * instruction even if the probed insn is a trap
+	 * variant as values in regs could play a part in
+	 * if the trap is taken or not
+	 */
+	regs->nip = (unsigned long)p->ainsn.insn;
 }
 
-static inline void save_previous_kprobe(struct kprobe_ctlblk *kcb)
+static void __kprobes save_previous_kprobe(struct kprobe_ctlblk *kcb)
 {
 	kcb->prev_kprobe.kp = kprobe_running();
 	kcb->prev_kprobe.status = kcb->kprobe_status;
 	kcb->prev_kprobe.saved_msr = kcb->kprobe_saved_msr;
 }
 
-static inline void restore_previous_kprobe(struct kprobe_ctlblk *kcb)
+static void __kprobes restore_previous_kprobe(struct kprobe_ctlblk *kcb)
 {
 	__get_cpu_var(current_kprobe) = kcb->prev_kprobe.kp;
 	kcb->kprobe_status = kcb->prev_kprobe.status;
 	kcb->kprobe_saved_msr = kcb->prev_kprobe.saved_msr;
 }
 
-static inline void set_current_kprobe(struct kprobe *p, struct pt_regs *regs,
+static void __kprobes set_current_kprobe(struct kprobe *p, struct pt_regs *regs,
 				struct kprobe_ctlblk *kcb)
 {
 	__get_cpu_var(current_kprobe) = p;
@@ -141,7 +141,7 @@ void __kprobes arch_prepare_kretprobe(struct kretprobe *rp,
 	}
 }
 
-static inline int kprobe_handler(struct pt_regs *regs)
+static int __kprobes kprobe_handler(struct pt_regs *regs)
 {
 	struct kprobe *p;
 	int ret = 0;
@@ -334,7 +334,7 @@ static void __kprobes resume_execution(struct kprobe *p, struct pt_regs *regs)
 		regs->nip = (unsigned long)p->addr + 4;
 }
 
-static inline int post_kprobe_handler(struct pt_regs *regs)
+static int __kprobes post_kprobe_handler(struct pt_regs *regs)
 {
 	struct kprobe *cur = kprobe_running();
 	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
@@ -370,7 +370,7 @@ out:
 	return 1;
 }
 
-static inline int kprobe_fault_handler(struct pt_regs *regs, int trapnr)
+static int __kprobes kprobe_fault_handler(struct pt_regs *regs, int trapnr)
 {
 	struct kprobe *cur = kprobe_running();
 	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
diff --git a/arch/powerpc/kernel/module_64.c b/arch/powerpc/kernel/module_64.c
index 928b8581fcb0..ba34001fca8e 100644
--- a/arch/powerpc/kernel/module_64.c
+++ b/arch/powerpc/kernel/module_64.c
@@ -191,11 +191,19 @@ int module_frob_arch_sections(Elf64_Ehdr *hdr,
 				 (void *)hdr
 				 + sechdrs[sechdrs[i].sh_link].sh_offset);
 	}
-	if (!me->arch.stubs_section || !me->arch.toc_section) {
-		printk("%s: doesn't contain .toc or .stubs.\n", me->name);
+
+	if (!me->arch.stubs_section) {
+		printk("%s: doesn't contain .stubs.\n", me->name);
 		return -ENOEXEC;
 	}
 
+	/* If we don't have a .toc, just use .stubs.  We need to set r2
+	   to some reasonable value in case the module calls out to
+	   other functions via a stub, or if a function pointer escapes
+	   the module by some means.  */
+	if (!me->arch.toc_section)
+		me->arch.toc_section = me->arch.stubs_section;
+
 	/* Override the stubs size */
 	sechdrs[me->arch.stubs_section].sh_size = get_stubs_size(hdr, sechdrs);
 	return 0;
@@ -342,7 +350,7 @@ int apply_relocate_add(Elf64_Shdr *sechdrs,
 			break;
 
 		case R_PPC64_TOC16:
-			/* Subtact TOC pointer */
+			/* Subtract TOC pointer */
 			value -= my_r2(sechdrs, me);
 			if (value + 0x8000 > 0xffff) {
 				printk("%s: bad TOC16 relocation (%lu)\n",
@@ -355,7 +363,7 @@ int apply_relocate_add(Elf64_Shdr *sechdrs,
 			break;
 
 		case R_PPC64_TOC16_DS:
-			/* Subtact TOC pointer */
+			/* Subtract TOC pointer */
 			value -= my_r2(sechdrs, me);
 			if ((value & 3) != 0 || value + 0x8000 > 0xffff) {
 				printk("%s: bad TOC16_DS relocation (%lu)\n",
diff --git a/arch/powerpc/kernel/pci_iommu.c b/arch/powerpc/kernel/pci_iommu.c
index c336f3e31cff..c1d95e14bbed 100644
--- a/arch/powerpc/kernel/pci_iommu.c
+++ b/arch/powerpc/kernel/pci_iommu.c
@@ -59,6 +59,25 @@ static inline struct iommu_table *devnode_table(struct device *dev)
 }
 
 
+static inline unsigned long device_to_mask(struct device *hwdev)
+{
+	struct pci_dev *pdev;
+
+	if (!hwdev) {
+		pdev = ppc64_isabridge_dev;
+		if (!pdev) /* This is the best guess we can do */
+			return 0xfffffffful;
+	} else
+		pdev = to_pci_dev(hwdev);
+
+	if (pdev->dma_mask)
+		return pdev->dma_mask;
+
+	/* Assume devices without mask can take 32 bit addresses */
+	return 0xfffffffful;
+}
+
+
 /* Allocates a contiguous real buffer and creates mappings over it.
  * Returns the virtual address of the buffer and sets dma_handle
  * to the dma address (mapping) of the first page.
@@ -67,7 +86,7 @@ static void *pci_iommu_alloc_coherent(struct device *hwdev, size_t size,
 			   dma_addr_t *dma_handle, gfp_t flag)
 {
 	return iommu_alloc_coherent(devnode_table(hwdev), size, dma_handle,
-			flag);
+			device_to_mask(hwdev), flag);
 }
 
 static void pci_iommu_free_coherent(struct device *hwdev, size_t size,
@@ -85,7 +104,8 @@ static void pci_iommu_free_coherent(struct device *hwdev, size_t size,
 static dma_addr_t pci_iommu_map_single(struct device *hwdev, void *vaddr,
 		size_t size, enum dma_data_direction direction)
 {
-	return iommu_map_single(devnode_table(hwdev), vaddr, size, direction);
+	return iommu_map_single(devnode_table(hwdev), vaddr, size,
+			        device_to_mask(hwdev), direction);
 }
 
 
@@ -100,7 +120,7 @@ static int pci_iommu_map_sg(struct device *pdev, struct scatterlist *sglist,
 		int nelems, enum dma_data_direction direction)
 {
 	return iommu_map_sg(pdev, devnode_table(pdev), sglist,
-			nelems, direction);
+			nelems, device_to_mask(pdev), direction);
 }
 
 static void pci_iommu_unmap_sg(struct device *pdev, struct scatterlist *sglist,
@@ -112,7 +132,19 @@ static void pci_iommu_unmap_sg(struct device *pdev, struct scatterlist *sglist,
 /* We support DMA to/from any memory page via the iommu */
 static int pci_iommu_dma_supported(struct device *dev, u64 mask)
 {
-	return 1;
+	struct iommu_table *tbl = devnode_table(dev);
+
+	if (!tbl || tbl->it_offset > mask) {
+		printk(KERN_INFO "Warning: IOMMU table offset too big for device mask\n");
+		if (tbl)
+			printk(KERN_INFO "mask: 0x%08lx, table offset: 0x%08lx\n",
+				mask, tbl->it_offset);
+		else
+			printk(KERN_INFO "mask: 0x%08lx, table unavailable\n",
+				mask);
+		return 0;
+	} else
+		return 1;
 }
 
 void pci_iommu_init(void)
diff --git a/arch/powerpc/kernel/ppc_ksyms.c b/arch/powerpc/kernel/ppc_ksyms.c
index dfa5398ab3c8..4b052ae5dc34 100644
--- a/arch/powerpc/kernel/ppc_ksyms.c
+++ b/arch/powerpc/kernel/ppc_ksyms.c
@@ -81,6 +81,7 @@ EXPORT_SYMBOL(strcat);
 EXPORT_SYMBOL(strlen);
 EXPORT_SYMBOL(strcmp);
 EXPORT_SYMBOL(strcasecmp);
+EXPORT_SYMBOL(strncasecmp);
 
 EXPORT_SYMBOL(csum_partial);
 EXPORT_SYMBOL(csum_partial_copy_generic);
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index 4336390bcf34..9a07f97f0712 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -62,7 +62,7 @@ static int __initdata dt_root_addr_cells;
 static int __initdata dt_root_size_cells;
 
 #ifdef CONFIG_PPC64
-static int __initdata iommu_is_off;
+int __initdata iommu_is_off;
 int __initdata iommu_force_on;
 unsigned long tce_alloc_start, tce_alloc_end;
 #endif
@@ -885,6 +885,74 @@ void __init unflatten_device_tree(void)
 	DBG(" <- unflatten_device_tree()\n");
 }
 
+/*
+ * ibm,pa-features is a per-cpu property that contains a string of
+ * attribute descriptors, each of which has a 2 byte header plus up
+ * to 254 bytes worth of processor attribute bits.  First header
+ * byte specifies the number of bytes following the header.
+ * Second header byte is an "attribute-specifier" type, of which
+ * zero is the only currently-defined value.
+ * Implementation:  Pass in the byte and bit offset for the feature
+ * that we are interested in.  The function will return -1 if the
+ * pa-features property is missing, or a 1/0 to indicate if the feature
+ * is supported/not supported.  Note that the bit numbers are
+ * big-endian to match the definition in PAPR.
+ */
+static struct ibm_pa_feature {
+	unsigned long	cpu_features;	/* CPU_FTR_xxx bit */
+	unsigned int	cpu_user_ftrs;	/* PPC_FEATURE_xxx bit */
+	unsigned char	pabyte;		/* byte number in ibm,pa-features */
+	unsigned char	pabit;		/* bit number (big-endian) */
+	unsigned char	invert;		/* if 1, pa bit set => clear feature */
+} ibm_pa_features[] __initdata = {
+	{0, PPC_FEATURE_HAS_MMU,	0, 0, 0},
+	{0, PPC_FEATURE_HAS_FPU,	0, 1, 0},
+	{CPU_FTR_SLB, 0,		0, 2, 0},
+	{CPU_FTR_CTRL, 0,		0, 3, 0},
+	{CPU_FTR_NOEXECUTE, 0,		0, 6, 0},
+	{CPU_FTR_NODSISRALIGN, 0,	1, 1, 1},
+	{CPU_FTR_CI_LARGE_PAGE, 0,	1, 2, 0},
+};
+
+static void __init check_cpu_pa_features(unsigned long node)
+{
+	unsigned char *pa_ftrs;
+	unsigned long len, tablelen, i, bit;
+
+	pa_ftrs = of_get_flat_dt_prop(node, "ibm,pa-features", &tablelen);
+	if (pa_ftrs == NULL)
+		return;
+
+	/* find descriptor with type == 0 */
+	for (;;) {
+		if (tablelen < 3)
+			return;
+		len = 2 + pa_ftrs[0];
+		if (tablelen < len)
+			return;		/* descriptor 0 not found */
+		if (pa_ftrs[1] == 0)
+			break;
+		tablelen -= len;
+		pa_ftrs += len;
+	}
+
+	/* loop over bits we know about */
+	for (i = 0; i < ARRAY_SIZE(ibm_pa_features); ++i) {
+		struct ibm_pa_feature *fp = &ibm_pa_features[i];
+
+		if (fp->pabyte >= pa_ftrs[0])
+			continue;
+		bit = (pa_ftrs[2 + fp->pabyte] >> (7 - fp->pabit)) & 1;
+		if (bit ^ fp->invert) {
+			cur_cpu_spec->cpu_features |= fp->cpu_features;
+			cur_cpu_spec->cpu_user_features |= fp->cpu_user_ftrs;
+		} else {
+			cur_cpu_spec->cpu_features &= ~fp->cpu_features;
+			cur_cpu_spec->cpu_user_features &= ~fp->cpu_user_ftrs;
+		}
+	}
+}
+
 static int __init early_init_dt_scan_cpus(unsigned long node,
 					  const char *uname, int depth,
 					  void *data)
@@ -969,6 +1037,8 @@ static int __init early_init_dt_scan_cpus(unsigned long node,
 	}
 #endif /* CONFIG_ALTIVEC */
 
+	check_cpu_pa_features(node);
+
 #ifdef CONFIG_PPC_PSERIES
 	if (nthreads > 1)
 		cur_cpu_spec->cpu_features |= CPU_FTR_SMT;
diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index d66c5e77fcff..41e9ab40cd54 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -636,10 +636,96 @@ static void __init early_cmdline_parse(void)
 
 #ifdef CONFIG_PPC_PSERIES
 /*
- * To tell the firmware what our capabilities are, we have to pass
- * it a fake 32-bit ELF header containing a couple of PT_NOTE sections
- * that contain structures that contain the actual values.
+ * There are two methods for telling firmware what our capabilities are.
+ * Newer machines have an "ibm,client-architecture-support" method on the
+ * root node.  For older machines, we have to call the "process-elf-header"
+ * method in the /packages/elf-loader node, passing it a fake 32-bit
+ * ELF header containing a couple of PT_NOTE sections that contain
+ * structures that contain various information.
  */
+
+/*
+ * New method - extensible architecture description vector.
+ *
+ * Because the description vector contains a mix of byte and word
+ * values, we declare it as an unsigned char array, and use this
+ * macro to put word values in.
+ */
+#define W(x)	((x) >> 24) & 0xff, ((x) >> 16) & 0xff, \
+		((x) >> 8) & 0xff, (x) & 0xff
+
+/* Option vector bits - generic bits in byte 1 */
+#define OV_IGNORE		0x80	/* ignore this vector */
+#define OV_CESSATION_POLICY	0x40	/* halt if unsupported option present*/
+
+/* Option vector 1: processor architectures supported */
+#define OV1_PPC_2_00		0x80	/* set if we support PowerPC 2.00 */
+#define OV1_PPC_2_01		0x40	/* set if we support PowerPC 2.01 */
+#define OV1_PPC_2_02		0x20	/* set if we support PowerPC 2.02 */
+#define OV1_PPC_2_03		0x10	/* set if we support PowerPC 2.03 */
+#define OV1_PPC_2_04		0x08	/* set if we support PowerPC 2.04 */
+#define OV1_PPC_2_05		0x04	/* set if we support PowerPC 2.05 */
+
+/* Option vector 2: Open Firmware options supported */
+#define OV2_REAL_MODE		0x20	/* set if we want OF in real mode */
+
+/* Option vector 3: processor options supported */
+#define OV3_FP			0x80	/* floating point */
+#define OV3_VMX			0x40	/* VMX/Altivec */
+
+/* Option vector 5: PAPR/OF options supported */
+#define OV5_LPAR		0x80	/* logical partitioning supported */
+#define OV5_SPLPAR		0x40	/* shared-processor LPAR supported */
+/* ibm,dynamic-reconfiguration-memory property supported */
+#define OV5_DRCONF_MEMORY	0x20
+#define OV5_LARGE_PAGES		0x10	/* large pages supported */
+
+/*
+ * The architecture vector has an array of PVR mask/value pairs,
+ * followed by # option vectors - 1, followed by the option vectors.
+ */
+static unsigned char ibm_architecture_vec[] = {
+	W(0xfffe0000), W(0x003a0000),	/* POWER5/POWER5+ */
+	W(0xffff0000), W(0x003e0000),	/* POWER6 */
+	W(0xfffffffe), W(0x0f000001),	/* all 2.04-compliant and earlier */
+	5 - 1,				/* 5 option vectors */
+
+	/* option vector 1: processor architectures supported */
+	3 - 1,				/* length */
+	0,				/* don't ignore, don't halt */
+	OV1_PPC_2_00 | OV1_PPC_2_01 | OV1_PPC_2_02 | OV1_PPC_2_03 |
+	OV1_PPC_2_04 | OV1_PPC_2_05,
+
+	/* option vector 2: Open Firmware options supported */
+	34 - 1,				/* length */
+	OV2_REAL_MODE,
+	0, 0,
+	W(0xffffffff),			/* real_base */
+	W(0xffffffff),			/* real_size */
+	W(0xffffffff),			/* virt_base */
+	W(0xffffffff),			/* virt_size */
+	W(0xffffffff),			/* load_base */
+	W(64),				/* 128MB min RMA */
+	W(0xffffffff),			/* full client load */
+	0,				/* min RMA percentage of total RAM */
+	48,				/* max log_2(hash table size) */
+
+	/* option vector 3: processor options supported */
+	3 - 1,				/* length */
+	0,				/* don't ignore, don't halt */
+	OV3_FP | OV3_VMX,
+
+	/* option vector 4: IBM PAPR implementation */
+	2 - 1,				/* length */
+	0,				/* don't halt */
+
+	/* option vector 5: PAPR/OF options */
+	3 - 1,				/* length */
+	0,				/* don't ignore, don't halt */
+	OV5_LPAR | OV5_SPLPAR | OV5_LARGE_PAGES,
+};
+
+/* Old method - ELF header with PT_NOTE sections */
 static struct fake_elf {
 	Elf32_Ehdr	elfhdr;
 	Elf32_Phdr	phdr[2];
@@ -728,8 +814,26 @@ static struct fake_elf {
 
 static void __init prom_send_capabilities(void)
 {
-	ihandle elfloader;
+	ihandle elfloader, root;
+	prom_arg_t ret;
+
+	root = call_prom("open", 1, 1, ADDR("/"));
+	if (root != 0) {
+		/* try calling the ibm,client-architecture-support method */
+		if (call_prom_ret("call-method", 3, 2, &ret,
+				  ADDR("ibm,client-architecture-support"),
+				  ADDR(ibm_architecture_vec)) == 0) {
+			/* the call exists... */
+			if (ret)
+				prom_printf("WARNING: ibm,client-architecture"
+					    "-support call FAILED!\n");
+			call_prom("close", 1, 0, root);
+			return;
+		}
+		call_prom("close", 1, 0, root);
+	}
 
+	/* no ibm,client-architecture-support call, try the old way */
 	elfloader = call_prom("open", 1, 1, ADDR("/packages/elf-loader"));
 	if (elfloader == 0) {
 		prom_printf("couldn't open /packages/elf-loader\n");
@@ -1528,12 +1632,11 @@ static int __init prom_find_machine_type(void)
 	 *    non-IBM designs !
 	 *  - it has /rtas
 	 */
-	len = prom_getprop(_prom->root, "model",
+	len = prom_getprop(_prom->root, "device_type",
 			   compat, sizeof(compat)-1);
 	if (len <= 0)
 		return PLATFORM_GENERIC;
-	compat[len] = 0;
-	if (strcmp(compat, "chrp"))
+	if (strcmp(compat, RELOC("chrp")))
 		return PLATFORM_GENERIC;
 
 	/* Default to pSeries. We need to know if we are running LPAR */
@@ -1954,10 +2057,45 @@ static void __init flatten_device_tree(void)
 
 }
 
-
-static void __init fixup_device_tree(void)
+#ifdef CONFIG_PPC_MAPLE
+/* PIBS Version 1.05.0000 04/26/2005 has an incorrect /ht/isa/ranges property.
+ * The values are bad, and it doesn't even have the right number of cells. */
+static void __init fixup_device_tree_maple(void)
 {
+	phandle isa;
+	u32 isa_ranges[6];
+
+	isa = call_prom("finddevice", 1, 1, ADDR("/ht@0/isa@4"));
+	if (!PHANDLE_VALID(isa))
+		return;
+
+	if (prom_getprop(isa, "ranges", isa_ranges, sizeof(isa_ranges))
+		== PROM_ERROR)
+		return;
+
+	if (isa_ranges[0] != 0x1 ||
+		isa_ranges[1] != 0xf4000000 ||
+		isa_ranges[2] != 0x00010000)
+		return;
+
+	prom_printf("fixing up bogus ISA range on Maple...\n");
+
+	isa_ranges[0] = 0x1;
+	isa_ranges[1] = 0x0;
+	isa_ranges[2] = 0x01002000; /* IO space; PCI device = 4 */
+	isa_ranges[3] = 0x0;
+	isa_ranges[4] = 0x0;
+	isa_ranges[5] = 0x00010000;
+	prom_setprop(isa, "/ht@0/isa@4", "ranges",
+			isa_ranges, sizeof(isa_ranges));
+}
+#else
+#define fixup_device_tree_maple()
+#endif
+
 #if defined(CONFIG_PPC64) && defined(CONFIG_PPC_PMAC)
+static void __init fixup_device_tree_pmac(void)
+{
 	phandle u3, i2c, mpic;
 	u32 u3_rev;
 	u32 interrupts[2];
@@ -1994,9 +2132,16 @@ static void __init fixup_device_tree(void)
 	parent = (u32)mpic;
 	prom_setprop(i2c, "/u3@0,f8000000/i2c@f8001000", "interrupt-parent",
 		     &parent, sizeof(parent));
-#endif
 }
+#else
+#define fixup_device_tree_pmac()
+#endif
 
+static void __init fixup_device_tree(void)
+{
+	fixup_device_tree_maple();
+	fixup_device_tree_pmac();
+}
 
 static void __init prom_find_boot_cpu(void)
 {
diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c
index bcb83574335b..4a677d1bd4ef 100644
--- a/arch/powerpc/kernel/ptrace.c
+++ b/arch/powerpc/kernel/ptrace.c
@@ -538,7 +538,7 @@ void do_syscall_trace_enter(struct pt_regs *regs)
 		do_syscall_trace();
 
 	if (unlikely(current->audit_context))
-		audit_syscall_entry(current,
+		audit_syscall_entry(
 #ifdef CONFIG_PPC32
 				    AUDIT_ARCH_PPC,
 #else
@@ -556,8 +556,7 @@ void do_syscall_trace_leave(struct pt_regs *regs)
 #endif
 
 	if (unlikely(current->audit_context))
-		audit_syscall_exit(current,
-				   (regs->ccr&0x1000)?AUDITSC_FAILURE:AUDITSC_SUCCESS,
+		audit_syscall_exit((regs->ccr&0x1000)?AUDITSC_FAILURE:AUDITSC_SUCCESS,
 				   regs->result);
 
 	if ((test_thread_flag(TIF_SYSCALL_TRACE)
diff --git a/arch/powerpc/kernel/rtas-proc.c b/arch/powerpc/kernel/rtas-proc.c
index 456286cf1d14..9c9ad1fa9cce 100644
--- a/arch/powerpc/kernel/rtas-proc.c
+++ b/arch/powerpc/kernel/rtas-proc.c
@@ -258,11 +258,11 @@ static int __init proc_rtas_init(void)
 	struct proc_dir_entry *entry;
 
 	if (!machine_is(pseries))
-		return 1;
+		return -ENODEV;
 
 	rtas_node = of_find_node_by_name(NULL, "rtas");
 	if (rtas_node == NULL)
-		return 1;
+		return -ENODEV;
 
 	entry = create_proc_entry("ppc64/rtas/progress", S_IRUGO|S_IWUSR, NULL);
 	if (entry)
diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c
index 1d93e73a7003..684ab1d49c65 100644
--- a/arch/powerpc/kernel/setup-common.c
+++ b/arch/powerpc/kernel/setup-common.c
@@ -516,3 +516,11 @@ void probe_machine(void)
 
 	printk(KERN_INFO "Using %s machine description\n", ppc_md.name);
 }
+
+int check_legacy_ioport(unsigned long base_port)
+{
+	if (ppc_md.check_legacy_ioport == NULL)
+		return 0;
+	return ppc_md.check_legacy_ioport(base_port);
+}
+EXPORT_SYMBOL(check_legacy_ioport);
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index 13e91c4d70a8..4467c49903b6 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -594,14 +594,6 @@ void ppc64_terminate_msg(unsigned int src, const char *msg)
 	printk("[terminate]%04x %s\n", src, msg);
 }
 
-int check_legacy_ioport(unsigned long base_port)
-{
-	if (ppc_md.check_legacy_ioport == NULL)
-		return 0;
-	return ppc_md.check_legacy_ioport(base_port);
-}
-EXPORT_SYMBOL(check_legacy_ioport);
-
 void cpu_die(void)
 {
 	if (ppc_md.cpu_die)
diff --git a/arch/powerpc/kernel/sysfs.c b/arch/powerpc/kernel/sysfs.c
index 73560ef6f802..5bc2585c8036 100644
--- a/arch/powerpc/kernel/sysfs.c
+++ b/arch/powerpc/kernel/sysfs.c
@@ -279,7 +279,7 @@ static void unregister_cpu_online(unsigned int cpu)
 }
 #endif /* CONFIG_HOTPLUG_CPU */
 
-static int __devinit sysfs_cpu_notify(struct notifier_block *self,
+static int sysfs_cpu_notify(struct notifier_block *self,
 				      unsigned long action, void *hcpu)
 {
 	unsigned int cpu = (unsigned int)(long)hcpu;
@@ -297,7 +297,7 @@ static int __devinit sysfs_cpu_notify(struct notifier_block *self,
 	return NOTIFY_OK;
 }
 
-static struct notifier_block __devinitdata sysfs_cpu_nb = {
+static struct notifier_block sysfs_cpu_nb = {
 	.notifier_call	= sysfs_cpu_notify,
 };
 
@@ -322,13 +322,31 @@ static void register_nodes(void)
 		}
 	}
 }
+
+int sysfs_add_device_to_node(struct sys_device *dev, int nid)
+{
+	struct node *node = &node_devices[nid];
+	return sysfs_create_link(&node->sysdev.kobj, &dev->kobj,
+			kobject_name(&dev->kobj));
+}
+
+void sysfs_remove_device_from_node(struct sys_device *dev, int nid)
+{
+	struct node *node = &node_devices[nid];
+	sysfs_remove_link(&node->sysdev.kobj, kobject_name(&dev->kobj));
+}
+
 #else
 static void register_nodes(void)
 {
 	return;
 }
+
 #endif
 
+EXPORT_SYMBOL_GPL(sysfs_add_device_to_node);
+EXPORT_SYMBOL_GPL(sysfs_remove_device_from_node);
+
 /* Only valid if CPU is present. */
 static ssize_t show_physical_id(struct sys_device *dev, char *buf)
 {
diff --git a/arch/powerpc/kernel/systbl.S b/arch/powerpc/kernel/systbl.S
index 1424eab450ee..26ed1f5ef16e 100644
--- a/arch/powerpc/kernel/systbl.S
+++ b/arch/powerpc/kernel/systbl.S
@@ -323,3 +323,25 @@ COMPAT_SYS(pselect6)
 COMPAT_SYS(ppoll)
 SYSCALL(unshare)
 SYSCALL(splice)
+SYSCALL(tee)
+SYSCALL(vmsplice)
+COMPAT_SYS(openat)
+SYSCALL(mkdirat)
+SYSCALL(mknodat)
+SYSCALL(fchownat)
+COMPAT_SYS(futimesat)
+SYSX(sys_newfstatat, sys_fstatat64, sys_fstatat64)
+SYSCALL(unlinkat)
+SYSCALL(renameat)
+SYSCALL(linkat)
+SYSCALL(symlinkat)
+SYSCALL(readlinkat)
+SYSCALL(fchmodat)
+SYSCALL(faccessat)
+COMPAT_SYS(get_robust_list)
+COMPAT_SYS(set_robust_list)
+
+/*
+ * please add new calls to arch/powerpc/platforms/cell/spu_callbacks.c
+ * as well when appropriate.
+ */
diff --git a/arch/powerpc/kernel/vio.c b/arch/powerpc/kernel/vio.c
index 13c655ba2841..971020cf3f7d 100644
--- a/arch/powerpc/kernel/vio.c
+++ b/arch/powerpc/kernel/vio.c
@@ -202,7 +202,7 @@ static dma_addr_t vio_map_single(struct device *dev, void *vaddr,
 			  size_t size, enum dma_data_direction direction)
 {
 	return iommu_map_single(to_vio_dev(dev)->iommu_table, vaddr, size,
-			direction);
+			~0ul, direction);
 }
 
 static void vio_unmap_single(struct device *dev, dma_addr_t dma_handle,
@@ -216,7 +216,7 @@ static int vio_map_sg(struct device *dev, struct scatterlist *sglist,
 		int nelems, enum dma_data_direction direction)
 {
 	return iommu_map_sg(dev, to_vio_dev(dev)->iommu_table, sglist,
-			nelems, direction);
+			nelems, ~0ul, direction);
 }
 
 static void vio_unmap_sg(struct device *dev, struct scatterlist *sglist,
@@ -229,7 +229,7 @@ static void *vio_alloc_coherent(struct device *dev, size_t size,
 			   dma_addr_t *dma_handle, gfp_t flag)
 {
 	return iommu_alloc_coherent(to_vio_dev(dev)->iommu_table, size,
-			dma_handle, flag);
+			dma_handle, ~0ul, flag);
 }
 
 static void vio_free_coherent(struct device *dev, size_t size,
diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c
index 7370f9f33e29..266b8b2ceac9 100644
--- a/arch/powerpc/mm/hugetlbpage.c
+++ b/arch/powerpc/mm/hugetlbpage.c
@@ -30,13 +30,66 @@
 #define NUM_LOW_AREAS	(0x100000000UL >> SID_SHIFT)
 #define NUM_HIGH_AREAS	(PGTABLE_RANGE >> HTLB_AREA_SHIFT)
 
+#ifdef CONFIG_PPC_64K_PAGES
+#define HUGEPTE_INDEX_SIZE	(PMD_SHIFT-HPAGE_SHIFT)
+#else
+#define HUGEPTE_INDEX_SIZE	(PUD_SHIFT-HPAGE_SHIFT)
+#endif
+#define PTRS_PER_HUGEPTE	(1 << HUGEPTE_INDEX_SIZE)
+#define HUGEPTE_TABLE_SIZE	(sizeof(pte_t) << HUGEPTE_INDEX_SIZE)
+
+#define HUGEPD_SHIFT		(HPAGE_SHIFT + HUGEPTE_INDEX_SIZE)
+#define HUGEPD_SIZE		(1UL << HUGEPD_SHIFT)
+#define HUGEPD_MASK		(~(HUGEPD_SIZE-1))
+
+#define huge_pgtable_cache	(pgtable_cache[HUGEPTE_CACHE_NUM])
+
+/* Flag to mark huge PD pointers.  This means pmd_bad() and pud_bad()
+ * will choke on pointers to hugepte tables, which is handy for
+ * catching screwups early. */
+#define HUGEPD_OK	0x1
+
+typedef struct { unsigned long pd; } hugepd_t;
+
+#define hugepd_none(hpd)	((hpd).pd == 0)
+
+static inline pte_t *hugepd_page(hugepd_t hpd)
+{
+	BUG_ON(!(hpd.pd & HUGEPD_OK));
+	return (pte_t *)(hpd.pd & ~HUGEPD_OK);
+}
+
+static inline pte_t *hugepte_offset(hugepd_t *hpdp, unsigned long addr)
+{
+	unsigned long idx = ((addr >> HPAGE_SHIFT) & (PTRS_PER_HUGEPTE-1));
+	pte_t *dir = hugepd_page(*hpdp);
+
+	return dir + idx;
+}
+
+static int __hugepte_alloc(struct mm_struct *mm, hugepd_t *hpdp,
+			   unsigned long address)
+{
+	pte_t *new = kmem_cache_alloc(huge_pgtable_cache,
+				      GFP_KERNEL|__GFP_REPEAT);
+
+	if (! new)
+		return -ENOMEM;
+
+	spin_lock(&mm->page_table_lock);
+	if (!hugepd_none(*hpdp))
+		kmem_cache_free(huge_pgtable_cache, new);
+	else
+		hpdp->pd = (unsigned long)new | HUGEPD_OK;
+	spin_unlock(&mm->page_table_lock);
+	return 0;
+}
+
 /* Modelled after find_linux_pte() */
 pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr)
 {
 	pgd_t *pg;
 	pud_t *pu;
-	pmd_t *pm;
-	pte_t *pt;
 
 	BUG_ON(! in_hugepage_area(mm->context, addr));
 
@@ -46,26 +99,14 @@ pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr)
 	if (!pgd_none(*pg)) {
 		pu = pud_offset(pg, addr);
 		if (!pud_none(*pu)) {
-			pm = pmd_offset(pu, addr);
 #ifdef CONFIG_PPC_64K_PAGES
-			/* Currently, we use the normal PTE offset within full
-			 * size PTE pages, thus our huge PTEs are scattered in
-			 * the PTE page and we do waste some. We may change
-			 * that in the future, but the current mecanism keeps
-			 * things much simpler
-			 */
-			if (!pmd_none(*pm)) {
-				/* Note: pte_offset_* are all equivalent on
-				 * ppc64 as we don't have HIGHMEM
-				 */
-				pt = pte_offset_kernel(pm, addr);
-				return pt;
-			}
-#else /* CONFIG_PPC_64K_PAGES */
-			/* On 4k pages, we put huge PTEs in the PMD page */
-			pt = (pte_t *)pm;
-			return pt;
-#endif /* CONFIG_PPC_64K_PAGES */
+			pmd_t *pm;
+			pm = pmd_offset(pu, addr);
+			if (!pmd_none(*pm))
+				return hugepte_offset((hugepd_t *)pm, addr);
+#else
+			return hugepte_offset((hugepd_t *)pu, addr);
+#endif
 		}
 	}
 
@@ -76,8 +117,7 @@ pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr)
 {
 	pgd_t *pg;
 	pud_t *pu;
-	pmd_t *pm;
-	pte_t *pt;
+	hugepd_t *hpdp = NULL;
 
 	BUG_ON(! in_hugepage_area(mm->context, addr));
 
@@ -87,23 +127,182 @@ pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr)
 	pu = pud_alloc(mm, pg, addr);
 
 	if (pu) {
+#ifdef CONFIG_PPC_64K_PAGES
+		pmd_t *pm;
 		pm = pmd_alloc(mm, pu, addr);
-		if (pm) {
+		if (pm)
+			hpdp = (hugepd_t *)pm;
+#else
+		hpdp = (hugepd_t *)pu;
+#endif
+	}
+
+	if (! hpdp)
+		return NULL;
+
+	if (hugepd_none(*hpdp) && __hugepte_alloc(mm, hpdp, addr))
+		return NULL;
+
+	return hugepte_offset(hpdp, addr);
+}
+
+static void free_hugepte_range(struct mmu_gather *tlb, hugepd_t *hpdp)
+{
+	pte_t *hugepte = hugepd_page(*hpdp);
+
+	hpdp->pd = 0;
+	tlb->need_flush = 1;
+	pgtable_free_tlb(tlb, pgtable_free_cache(hugepte, HUGEPTE_CACHE_NUM,
+						 HUGEPTE_TABLE_SIZE-1));
+}
+
 #ifdef CONFIG_PPC_64K_PAGES
-			/* See comment in huge_pte_offset. Note that if we ever
-			 * want to put the page size in the PMD, we would have
-			 * to open code our own pte_alloc* function in order
-			 * to populate and set the size atomically
-			 */
-			pt = pte_alloc_map(mm, pm, addr);
-#else /* CONFIG_PPC_64K_PAGES */
-			pt = (pte_t *)pm;
-#endif /* CONFIG_PPC_64K_PAGES */
-			return pt;
-		}
+static void hugetlb_free_pmd_range(struct mmu_gather *tlb, pud_t *pud,
+				   unsigned long addr, unsigned long end,
+				   unsigned long floor, unsigned long ceiling)
+{
+	pmd_t *pmd;
+	unsigned long next;
+	unsigned long start;
+
+	start = addr;
+	pmd = pmd_offset(pud, addr);
+	do {
+		next = pmd_addr_end(addr, end);
+		if (pmd_none(*pmd))
+			continue;
+		free_hugepte_range(tlb, (hugepd_t *)pmd);
+	} while (pmd++, addr = next, addr != end);
+
+	start &= PUD_MASK;
+	if (start < floor)
+		return;
+	if (ceiling) {
+		ceiling &= PUD_MASK;
+		if (!ceiling)
+			return;
 	}
+	if (end - 1 > ceiling - 1)
+		return;
 
-	return NULL;
+	pmd = pmd_offset(pud, start);
+	pud_clear(pud);
+	pmd_free_tlb(tlb, pmd);
+}
+#endif
+
+static void hugetlb_free_pud_range(struct mmu_gather *tlb, pgd_t *pgd,
+				   unsigned long addr, unsigned long end,
+				   unsigned long floor, unsigned long ceiling)
+{
+	pud_t *pud;
+	unsigned long next;
+	unsigned long start;
+
+	start = addr;
+	pud = pud_offset(pgd, addr);
+	do {
+		next = pud_addr_end(addr, end);
+#ifdef CONFIG_PPC_64K_PAGES
+		if (pud_none_or_clear_bad(pud))
+			continue;
+		hugetlb_free_pmd_range(tlb, pud, addr, next, floor, ceiling);
+#else
+		if (pud_none(*pud))
+			continue;
+		free_hugepte_range(tlb, (hugepd_t *)pud);
+#endif
+	} while (pud++, addr = next, addr != end);
+
+	start &= PGDIR_MASK;
+	if (start < floor)
+		return;
+	if (ceiling) {
+		ceiling &= PGDIR_MASK;
+		if (!ceiling)
+			return;
+	}
+	if (end - 1 > ceiling - 1)
+		return;
+
+	pud = pud_offset(pgd, start);
+	pgd_clear(pgd);
+	pud_free_tlb(tlb, pud);
+}
+
+/*
+ * This function frees user-level page tables of a process.
+ *
+ * Must be called with pagetable lock held.
+ */
+void hugetlb_free_pgd_range(struct mmu_gather **tlb,
+			    unsigned long addr, unsigned long end,
+			    unsigned long floor, unsigned long ceiling)
+{
+	pgd_t *pgd;
+	unsigned long next;
+	unsigned long start;
+
+	/*
+	 * Comments below take from the normal free_pgd_range().  They
+	 * apply here too.  The tests against HUGEPD_MASK below are
+	 * essential, because we *don't* test for this at the bottom
+	 * level.  Without them we'll attempt to free a hugepte table
+	 * when we unmap just part of it, even if there are other
+	 * active mappings using it.
+	 *
+	 * The next few lines have given us lots of grief...
+	 *
+	 * Why are we testing HUGEPD* at this top level?  Because
+	 * often there will be no work to do at all, and we'd prefer
+	 * not to go all the way down to the bottom just to discover
+	 * that.
+	 *
+	 * Why all these "- 1"s?  Because 0 represents both the bottom
+	 * of the address space and the top of it (using -1 for the
+	 * top wouldn't help much: the masks would do the wrong thing).
+	 * The rule is that addr 0 and floor 0 refer to the bottom of
+	 * the address space, but end 0 and ceiling 0 refer to the top
+	 * Comparisons need to use "end - 1" and "ceiling - 1" (though
+	 * that end 0 case should be mythical).
+	 *
+	 * Wherever addr is brought up or ceiling brought down, we
+	 * must be careful to reject "the opposite 0" before it
+	 * confuses the subsequent tests.  But what about where end is
+	 * brought down by HUGEPD_SIZE below? no, end can't go down to
+	 * 0 there.
+	 *
+	 * Whereas we round start (addr) and ceiling down, by different
+	 * masks at different levels, in order to test whether a table
+	 * now has no other vmas using it, so can be freed, we don't
+	 * bother to round floor or end up - the tests don't need that.
+	 */
+
+	addr &= HUGEPD_MASK;
+	if (addr < floor) {
+		addr += HUGEPD_SIZE;
+		if (!addr)
+			return;
+	}
+	if (ceiling) {
+		ceiling &= HUGEPD_MASK;
+		if (!ceiling)
+			return;
+	}
+	if (end - 1 > ceiling - 1)
+		end -= HUGEPD_SIZE;
+	if (addr > end - 1)
+		return;
+
+	start = addr;
+	pgd = pgd_offset((*tlb)->mm, addr);
+	do {
+		BUG_ON(! in_hugepage_area((*tlb)->mm->context, addr));
+		next = pgd_addr_end(addr, end);
+		if (pgd_none_or_clear_bad(pgd))
+			continue;
+		hugetlb_free_pud_range(*tlb, pgd, addr, next, floor, ceiling);
+	} while (pgd++, addr = next, addr != end);
 }
 
 void set_huge_pte_at(struct mm_struct *mm, unsigned long addr,
@@ -841,3 +1040,27 @@ repeat:
  out:
 	return err;
 }
+
+static void zero_ctor(void *addr, kmem_cache_t *cache, unsigned long flags)
+{
+	memset(addr, 0, kmem_cache_size(cache));
+}
+
+static int __init hugetlbpage_init(void)
+{
+	if (!cpu_has_feature(CPU_FTR_16M_PAGE))
+		return -ENODEV;
+
+	huge_pgtable_cache = kmem_cache_create("hugepte_cache",
+					       HUGEPTE_TABLE_SIZE,
+					       HUGEPTE_TABLE_SIZE,
+					       SLAB_HWCACHE_ALIGN |
+					       SLAB_MUST_HWCACHE_ALIGN,
+					       zero_ctor, NULL);
+	if (! huge_pgtable_cache)
+		panic("hugetlbpage_init(): could not create hugepte cache\n");
+
+	return 0;
+}
+
+module_init(hugetlbpage_init);
diff --git a/arch/powerpc/mm/init_64.c b/arch/powerpc/mm/init_64.c
index babebd15bdc4..9e30f968c184 100644
--- a/arch/powerpc/mm/init_64.c
+++ b/arch/powerpc/mm/init_64.c
@@ -162,7 +162,14 @@ static const char *pgtable_cache_name[ARRAY_SIZE(pgtable_cache_size)] = {
 };
 #endif /* CONFIG_PPC_64K_PAGES */
 
+#ifdef CONFIG_HUGETLB_PAGE
+/* Hugepages need one extra cache, initialized in hugetlbpage.c.  We
+ * can't put into the tables above, because HPAGE_SHIFT is not compile
+ * time constant. */
+kmem_cache_t *pgtable_cache[ARRAY_SIZE(pgtable_cache_size)+1];
+#else
 kmem_cache_t *pgtable_cache[ARRAY_SIZE(pgtable_cache_size)];
+#endif
 
 void pgtable_cache_init(void)
 {
diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c
index 0a335f34974c..092355f37399 100644
--- a/arch/powerpc/mm/numa.c
+++ b/arch/powerpc/mm/numa.c
@@ -194,7 +194,7 @@ static int *of_get_associativity(struct device_node *dev)
 /* Returns nid in the range [0..MAX_NUMNODES-1], or -1 if no useful numa
  * info is found.
  */
-static int of_node_to_nid(struct device_node *device)
+static int of_node_to_nid_single(struct device_node *device)
 {
 	int nid = -1;
 	unsigned int *tmp;
@@ -216,6 +216,28 @@ out:
 	return nid;
 }
 
+/* Walk the device tree upwards, looking for an associativity id */
+int of_node_to_nid(struct device_node *device)
+{
+	struct device_node *tmp;
+	int nid = -1;
+
+	of_node_get(device);
+	while (device) {
+		nid = of_node_to_nid_single(device);
+		if (nid != -1)
+			break;
+
+	        tmp = device;
+		device = of_get_parent(tmp);
+		of_node_put(tmp);
+	}
+	of_node_put(device);
+
+	return nid;
+}
+EXPORT_SYMBOL_GPL(of_node_to_nid);
+
 /*
  * In theory, the "ibm,associativity" property may contain multiple
  * associativity lists because a resource may be multiply connected
@@ -300,7 +322,7 @@ static int __cpuinit numa_setup_cpu(unsigned long lcpu)
 		goto out;
 	}
 
-	nid = of_node_to_nid(cpu);
+	nid = of_node_to_nid_single(cpu);
 
 	if (nid < 0 || !node_online(nid))
 		nid = any_online_node(NODE_MASK_ALL);
@@ -393,7 +415,7 @@ static int __init parse_numa_properties(void)
 
 		cpu = find_cpu_node(i);
 		BUG_ON(!cpu);
-		nid = of_node_to_nid(cpu);
+		nid = of_node_to_nid_single(cpu);
 		of_node_put(cpu);
 
 		/*
@@ -437,7 +459,7 @@ new_range:
 		 * have associativity properties.  If none, then
 		 * everything goes to default_nid.
 		 */
-		nid = of_node_to_nid(memory);
+		nid = of_node_to_nid_single(memory);
 		if (nid < 0)
 			nid = default_nid;
 		node_set_online(nid);
@@ -776,7 +798,7 @@ int hot_add_scn_to_nid(unsigned long scn_addr)
 ha_new_range:
 		start = read_n_cells(n_mem_addr_cells, &memcell_buf);
 		size = read_n_cells(n_mem_size_cells, &memcell_buf);
-		nid = of_node_to_nid(memory);
+		nid = of_node_to_nid_single(memory);
 
 		/* Domains not present at boot default to 0 */
 		if (nid < 0 || !node_online(nid))
diff --git a/arch/powerpc/platforms/cell/Kconfig b/arch/powerpc/platforms/cell/Kconfig
index c2a3db8edb0c..6a02d51086c8 100644
--- a/arch/powerpc/platforms/cell/Kconfig
+++ b/arch/powerpc/platforms/cell/Kconfig
@@ -12,7 +12,8 @@ config SPU_FS
 
 config SPUFS_MMAP
 	bool
-	depends on SPU_FS && SPARSEMEM && !PPC_64K_PAGES
+	depends on SPU_FS && SPARSEMEM
+	select MEMORY_HOTPLUG
 	default y
 
 endmenu
diff --git a/arch/powerpc/platforms/cell/setup.c b/arch/powerpc/platforms/cell/setup.c
index dac5d0365fde..6574b22b3cf3 100644
--- a/arch/powerpc/platforms/cell/setup.c
+++ b/arch/powerpc/platforms/cell/setup.c
@@ -29,6 +29,8 @@
 #include <linux/seq_file.h>
 #include <linux/root_dev.h>
 #include <linux/console.h>
+#include <linux/mutex.h>
+#include <linux/memory_hotplug.h>
 
 #include <asm/mmu.h>
 #include <asm/processor.h>
@@ -46,6 +48,7 @@
 #include <asm/cputable.h>
 #include <asm/ppc-pci.h>
 #include <asm/irq.h>
+#include <asm/spu.h>
 
 #include "interrupt.h"
 #include "iommu.h"
@@ -69,77 +72,6 @@ static void cell_show_cpuinfo(struct seq_file *m)
 	of_node_put(root);
 }
 
-#ifdef CONFIG_SPARSEMEM
-static int __init find_spu_node_id(struct device_node *spe)
-{
-	unsigned int *id;
-#ifdef CONFIG_NUMA
-	struct device_node *cpu;
-	cpu = spe->parent->parent;
-	id = (unsigned int *)get_property(cpu, "node-id", NULL);
-#else
-	id = NULL;
-#endif
-	return id ? *id : 0;
-}
-
-static void __init cell_spuprop_present(struct device_node *spe,
-				       const char *prop, int early)
-{
-	struct address_prop {
-		unsigned long address;
-		unsigned int len;
-	} __attribute__((packed)) *p;
-	int proplen;
-
-	unsigned long start_pfn, end_pfn, pfn;
-	int node_id;
-
-	p = (void*)get_property(spe, prop, &proplen);
-	WARN_ON(proplen != sizeof (*p));
-
-	node_id = find_spu_node_id(spe);
-
-	start_pfn = p->address >> PAGE_SHIFT;
-	end_pfn = (p->address + p->len + PAGE_SIZE - 1) >> PAGE_SHIFT;
-
-	/* We need to call memory_present *before* the call to sparse_init,
-	   but we can initialize the page structs only *after* that call.
-	   Thus, we're being called twice. */
-	if (early)
-		memory_present(node_id, start_pfn, end_pfn);
-	else {
-		/* As the pages backing SPU LS and I/O are outside the range
-		   of regular memory, their page structs were not initialized
-		   by free_area_init. Do it here instead. */
-		for (pfn = start_pfn; pfn < end_pfn; pfn++) {
-			struct page *page = pfn_to_page(pfn);
-			set_page_links(page, ZONE_DMA, node_id, pfn);
-			init_page_count(page);
-			reset_page_mapcount(page);
-			SetPageReserved(page);
-			INIT_LIST_HEAD(&page->lru);
-		}
-	}
-}
-
-static void __init cell_spumem_init(int early)
-{
-	struct device_node *node;
-	for (node = of_find_node_by_type(NULL, "spe");
-			node; node = of_find_node_by_type(node, "spe")) {
-		cell_spuprop_present(node, "local-store", early);
-		cell_spuprop_present(node, "problem", early);
-		cell_spuprop_present(node, "priv1", early);
-		cell_spuprop_present(node, "priv2", early);
-	}
-}
-#else
-static void __init cell_spumem_init(int early)
-{
-}
-#endif
-
 static void cell_progress(char *s, unsigned short hex)
 {
 	printk("*** %04x : %s\n", hex, s ? s : "");
@@ -172,8 +104,6 @@ static void __init cell_setup_arch(void)
 #endif
 
 	mmio_nvram_init();
-
-	cell_spumem_init(0);
 }
 
 /*
@@ -189,8 +119,6 @@ static void __init cell_init_early(void)
 
 	ppc64_interrupt_controller = IC_CELL_PIC;
 
-	cell_spumem_init(1);
-
 	DBG(" <- cell_init_early()\n");
 }
 
diff --git a/arch/powerpc/platforms/cell/spu_base.c b/arch/powerpc/platforms/cell/spu_base.c
index 269dda4fd0b4..ad141fe8d52d 100644
--- a/arch/powerpc/platforms/cell/spu_base.c
+++ b/arch/powerpc/platforms/cell/spu_base.c
@@ -306,19 +306,19 @@ spu_request_irqs(struct spu *spu)
 
 	snprintf(spu->irq_c0, sizeof (spu->irq_c0), "spe%02d.0", spu->number);
 	ret = request_irq(irq_base + spu->isrc,
-		 spu_irq_class_0, 0, spu->irq_c0, spu);
+		 spu_irq_class_0, SA_INTERRUPT, spu->irq_c0, spu);
 	if (ret)
 		goto out;
 
 	snprintf(spu->irq_c1, sizeof (spu->irq_c1), "spe%02d.1", spu->number);
 	ret = request_irq(irq_base + IIC_CLASS_STRIDE + spu->isrc,
-		 spu_irq_class_1, 0, spu->irq_c1, spu);
+		 spu_irq_class_1, SA_INTERRUPT, spu->irq_c1, spu);
 	if (ret)
 		goto out1;
 
 	snprintf(spu->irq_c2, sizeof (spu->irq_c2), "spe%02d.2", spu->number);
 	ret = request_irq(irq_base + 2*IIC_CLASS_STRIDE + spu->isrc,
-		 spu_irq_class_2, 0, spu->irq_c2, spu);
+		 spu_irq_class_2, SA_INTERRUPT, spu->irq_c2, spu);
 	if (ret)
 		goto out2;
 	goto out;
@@ -487,10 +487,14 @@ int spu_irq_class_1_bottom(struct spu *spu)
 	ea = spu->dar;
 	dsisr = spu->dsisr;
 	if (dsisr & (MFC_DSISR_PTE_NOT_FOUND | MFC_DSISR_ACCESS_DENIED)) {
+		u64 flags;
+
 		access = (_PAGE_PRESENT | _PAGE_USER);
 		access |= (dsisr & MFC_DSISR_ACCESS_PUT) ? _PAGE_RW : 0UL;
+		local_irq_save(flags);
 		if (hash_page(ea, access, 0x300) != 0)
 			error |= CLASS1_ENABLE_STORAGE_FAULT_INTR;
+		local_irq_restore(flags);
 	}
 	if (error & CLASS1_ENABLE_STORAGE_FAULT_INTR) {
 		if ((ret = spu_handle_mm_fault(spu)) != 0)
@@ -516,8 +520,50 @@ void spu_irq_setaffinity(struct spu *spu, int cpu)
 }
 EXPORT_SYMBOL_GPL(spu_irq_setaffinity);
 
-static void __iomem * __init map_spe_prop(struct device_node *n,
-						 const char *name)
+static int __init find_spu_node_id(struct device_node *spe)
+{
+	unsigned int *id;
+	struct device_node *cpu;
+	cpu = spe->parent->parent;
+	id = (unsigned int *)get_property(cpu, "node-id", NULL);
+	return id ? *id : 0;
+}
+
+static int __init cell_spuprop_present(struct spu *spu, struct device_node *spe,
+		const char *prop)
+{
+	static DEFINE_MUTEX(add_spumem_mutex);
+
+	struct address_prop {
+		unsigned long address;
+		unsigned int len;
+	} __attribute__((packed)) *p;
+	int proplen;
+
+	unsigned long start_pfn, nr_pages;
+	struct pglist_data *pgdata;
+	struct zone *zone;
+	int ret;
+
+	p = (void*)get_property(spe, prop, &proplen);
+	WARN_ON(proplen != sizeof (*p));
+
+	start_pfn = p->address >> PAGE_SHIFT;
+	nr_pages = ((unsigned long)p->len + PAGE_SIZE - 1) >> PAGE_SHIFT;
+
+	pgdata = NODE_DATA(spu->nid);
+	zone = pgdata->node_zones;
+
+	/* XXX rethink locking here */
+	mutex_lock(&add_spumem_mutex);
+	ret = __add_pages(zone, start_pfn, nr_pages);
+	mutex_unlock(&add_spumem_mutex);
+
+	return ret;
+}
+
+static void __iomem * __init map_spe_prop(struct spu *spu,
+		struct device_node *n, const char *name)
 {
 	struct address_prop {
 		unsigned long address;
@@ -526,6 +572,8 @@ static void __iomem * __init map_spe_prop(struct device_node *n,
 
 	void *p;
 	int proplen;
+	void* ret = NULL;
+	int err = 0;
 
 	p = get_property(n, name, &proplen);
 	if (proplen != sizeof (struct address_prop))
@@ -533,7 +581,14 @@ static void __iomem * __init map_spe_prop(struct device_node *n,
 
 	prop = p;
 
-	return ioremap(prop->address, prop->len);
+	err = cell_spuprop_present(spu, n, name);
+	if (err && (err != -EEXIST))
+		goto out;
+
+	ret = ioremap(prop->address, prop->len);
+
+ out:
+	return ret;
 }
 
 static void spu_unmap(struct spu *spu)
@@ -544,44 +599,45 @@ static void spu_unmap(struct spu *spu)
 	iounmap((u8 __iomem *)spu->local_store);
 }
 
-static int __init spu_map_device(struct spu *spu, struct device_node *spe)
+static int __init spu_map_device(struct spu *spu, struct device_node *node)
 {
 	char *prop;
 	int ret;
 
 	ret = -ENODEV;
-	prop = get_property(spe, "isrc", NULL);
+	prop = get_property(node, "isrc", NULL);
 	if (!prop)
 		goto out;
 	spu->isrc = *(unsigned int *)prop;
 
-	spu->name = get_property(spe, "name", NULL);
+	spu->name = get_property(node, "name", NULL);
 	if (!spu->name)
 		goto out;
 
-	prop = get_property(spe, "local-store", NULL);
+	prop = get_property(node, "local-store", NULL);
 	if (!prop)
 		goto out;
 	spu->local_store_phys = *(unsigned long *)prop;
 
 	/* we use local store as ram, not io memory */
-	spu->local_store = (void __force *)map_spe_prop(spe, "local-store");
+	spu->local_store = (void __force *)
+		map_spe_prop(spu, node, "local-store");
 	if (!spu->local_store)
 		goto out;
 
-	prop = get_property(spe, "problem", NULL);
+	prop = get_property(node, "problem", NULL);
 	if (!prop)
 		goto out_unmap;
 	spu->problem_phys = *(unsigned long *)prop;
 
-	spu->problem= map_spe_prop(spe, "problem");
+	spu->problem= map_spe_prop(spu, node, "problem");
 	if (!spu->problem)
 		goto out_unmap;
 
-	spu->priv1= map_spe_prop(spe, "priv1");
+	spu->priv1= map_spe_prop(spu, node, "priv1");
 	/* priv1 is not available on a hypervisor */
 
-	spu->priv2= map_spe_prop(spe, "priv2");
+	spu->priv2= map_spe_prop(spu, node, "priv2");
 	if (!spu->priv2)
 		goto out_unmap;
 	ret = 0;
@@ -593,17 +649,6 @@ out:
 	return ret;
 }
 
-static int __init find_spu_node_id(struct device_node *spe)
-{
-	unsigned int *id;
-	struct device_node *cpu;
-
-	cpu = spe->parent->parent;
-	id = (unsigned int *)get_property(cpu, "node-id", NULL);
-
-	return id ? *id : 0;
-}
-
 static int __init create_spu(struct device_node *spe)
 {
 	struct spu *spu;
@@ -620,6 +665,10 @@ static int __init create_spu(struct device_node *spe)
 		goto out_free;
 
 	spu->node = find_spu_node_id(spe);
+	spu->nid = of_node_to_nid(spe);
+	if (spu->nid == -1)
+		spu->nid = 0;
+
 	spu->stop_code = 0;
 	spu->slb_replace = 0;
 	spu->mm = NULL;
diff --git a/arch/powerpc/platforms/cell/spu_callbacks.c b/arch/powerpc/platforms/cell/spu_callbacks.c
index 6594bec73882..b47fcc5ddb78 100644
--- a/arch/powerpc/platforms/cell/spu_callbacks.c
+++ b/arch/powerpc/platforms/cell/spu_callbacks.c
@@ -258,6 +258,7 @@ void *spu_syscall_table[] = {
 	[__NR_futex]			sys_futex,
 	[__NR_sched_setaffinity]	sys_sched_setaffinity,
 	[__NR_sched_getaffinity]	sys_sched_getaffinity,
+	[224]				sys_ni_syscall,
 	[__NR_tuxcall]			sys_ni_syscall,
 	[226]				sys_ni_syscall,
 	[__NR_io_setup]			sys_io_setup,
@@ -317,21 +318,36 @@ void *spu_syscall_table[] = {
 	[__NR_ppoll]			sys_ni_syscall, /* sys_ppoll */
 	[__NR_unshare]			sys_unshare,
 	[__NR_splice]			sys_splice,
+	[__NR_tee]			sys_tee,
+	[__NR_vmsplice]			sys_vmsplice,
+	[__NR_openat]			sys_openat,
+	[__NR_mkdirat]			sys_mkdirat,
+	[__NR_mknodat]			sys_mknodat,
+	[__NR_fchownat]			sys_fchownat,
+	[__NR_futimesat]		sys_futimesat,
+	[__NR_newfstatat]		sys_newfstatat,
+	[__NR_unlinkat]			sys_unlinkat,
+	[__NR_renameat]			sys_renameat,
+	[__NR_linkat]			sys_linkat,
+	[__NR_symlinkat]		sys_symlinkat,
+	[__NR_readlinkat]		sys_readlinkat,
+	[__NR_fchmodat]			sys_fchmodat,
+	[__NR_faccessat]		sys_faccessat,
+	[__NR_get_robust_list]		sys_get_robust_list,
+	[__NR_set_robust_list]		sys_set_robust_list,
 };
 
 long spu_sys_callback(struct spu_syscall_block *s)
 {
 	long (*syscall)(u64 a1, u64 a2, u64 a3, u64 a4, u64 a5, u64 a6);
 
-	BUILD_BUG_ON(ARRAY_SIZE(spu_syscall_table) != __NR_syscalls);
-
-	syscall = spu_syscall_table[s->nr_ret];
-
-	if (s->nr_ret >= __NR_syscalls) {
+	if (s->nr_ret >= ARRAY_SIZE(spu_syscall_table)) {
 		pr_debug("%s: invalid syscall #%ld", __FUNCTION__, s->nr_ret);
 		return -ENOSYS;
 	}
 
+	syscall = spu_syscall_table[s->nr_ret];
+
 #ifdef DEBUG
 	print_symbol(KERN_DEBUG "SPU-syscall %s:", (unsigned long)syscall);
 	printk("syscall%ld(%lx, %lx, %lx, %lx, %lx, %lx)\n",
diff --git a/arch/powerpc/platforms/cell/spufs/switch.c b/arch/powerpc/platforms/cell/spufs/switch.c
index 97898d5d34e5..1726bfe38ee0 100644
--- a/arch/powerpc/platforms/cell/spufs/switch.c
+++ b/arch/powerpc/platforms/cell/spufs/switch.c
@@ -1297,7 +1297,7 @@ static inline void setup_decr(struct spu_state *csa, struct spu *spu)
 		cycles_t resume_time = get_cycles();
 		cycles_t delta_time = resume_time - csa->suspend_time;
 
-		csa->lscsa->decr.slot[0] = delta_time;
+		csa->lscsa->decr.slot[0] -= delta_time;
 	}
 }
 
diff --git a/arch/powerpc/platforms/chrp/chrp.h b/arch/powerpc/platforms/chrp/chrp.h
index 63f0aee4c158..996c28744e96 100644
--- a/arch/powerpc/platforms/chrp/chrp.h
+++ b/arch/powerpc/platforms/chrp/chrp.h
@@ -9,3 +9,4 @@ extern long chrp_time_init(void);
 
 extern void chrp_find_bridges(void);
 extern void chrp_event_scan(unsigned long);
+extern void chrp_pcibios_fixup(void);
diff --git a/arch/powerpc/platforms/chrp/pci.c b/arch/powerpc/platforms/chrp/pci.c
index 8ef279ad36ad..ac224876ce59 100644
--- a/arch/powerpc/platforms/chrp/pci.c
+++ b/arch/powerpc/platforms/chrp/pci.c
@@ -23,6 +23,8 @@
 #include <asm/grackle.h>
 #include <asm/rtas.h>
 
+#include "chrp.h"
+
 /* LongTrail */
 void __iomem *gg2_pci_config_base;
 
@@ -314,6 +316,6 @@ chrp_find_bridges(void)
 	}
 
 	/* Do not fixup interrupts from OF tree on pegasos */
-	if (is_pegasos == 0)
-		ppc_md.pcibios_fixup = chrp_pcibios_fixup;
+	if (is_pegasos)
+		ppc_md.pcibios_fixup = NULL;
 }
diff --git a/arch/powerpc/platforms/chrp/setup.c b/arch/powerpc/platforms/chrp/setup.c
index 23a201718704..18d89f38796b 100644
--- a/arch/powerpc/platforms/chrp/setup.c
+++ b/arch/powerpc/platforms/chrp/setup.c
@@ -440,8 +440,6 @@ void __init chrp_init_IRQ(void)
 
 	if (_chrp_type == _CHRP_Pegasos)
 		ppc_md.get_irq        = i8259_irq;
-	else
-		ppc_md.get_irq        = mpic_get_irq;
 
 #if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(XMON)
 	/* see if there is a keyboard in the device tree
@@ -528,26 +526,24 @@ static int __init chrp_probe(void)
 	/* Assume we have an 8259... */
 	__irq_offset_value = NUM_ISA_INTERRUPTS;
 
-	ppc_md.setup_arch     = chrp_setup_arch;
-	ppc_md.show_cpuinfo   = chrp_show_cpuinfo;
-
-	ppc_md.init_IRQ       = chrp_init_IRQ;
-	ppc_md.init           = chrp_init2;
-
-	ppc_md.phys_mem_access_prot = pci_phys_mem_access_prot;
-
-	ppc_md.restart        = rtas_restart;
-	ppc_md.power_off      = rtas_power_off;
-	ppc_md.halt           = rtas_halt;
-
-	ppc_md.time_init      = chrp_time_init;
-	ppc_md.calibrate_decr = generic_calibrate_decr;
-
-	/* this may get overridden with rtas routines later... */
-	ppc_md.set_rtc_time   = chrp_set_rtc_time;
-	ppc_md.get_rtc_time   = chrp_get_rtc_time;
-
-#ifdef CONFIG_SMP
-	smp_ops = &chrp_smp_ops;
-#endif /* CONFIG_SMP */
+	return 1;
 }
+
+define_machine(chrp) {
+	.name			= "CHRP",
+	.probe			= chrp_probe,
+	.setup_arch		= chrp_setup_arch,
+	.init			= chrp_init2,
+	.show_cpuinfo		= chrp_show_cpuinfo,
+	.init_IRQ		= chrp_init_IRQ,
+	.get_irq		= mpic_get_irq,
+	.pcibios_fixup		= chrp_pcibios_fixup,
+	.restart		= rtas_restart,
+	.power_off		= rtas_power_off,
+	.halt			= rtas_halt,
+	.time_init		= chrp_time_init,
+	.set_rtc_time		= chrp_set_rtc_time,
+	.get_rtc_time		= chrp_get_rtc_time,
+	.calibrate_decr		= generic_calibrate_decr,
+	.phys_mem_access_prot	= pci_phys_mem_access_prot,
+};
diff --git a/arch/powerpc/platforms/iseries/setup.c b/arch/powerpc/platforms/iseries/setup.c
index 6ce8a404ba6b..a6fd9bedb074 100644
--- a/arch/powerpc/platforms/iseries/setup.c
+++ b/arch/powerpc/platforms/iseries/setup.c
@@ -54,6 +54,7 @@
 #include <asm/iseries/hv_lp_event.h>
 #include <asm/iseries/lpar_map.h>
 #include <asm/udbg.h>
+#include <asm/irq.h>
 
 #include "naca.h"
 #include "setup.h"
@@ -684,6 +685,12 @@ static int __init iseries_probe(void)
 	powerpc_firmware_features |= FW_FEATURE_ISERIES;
 	powerpc_firmware_features |= FW_FEATURE_LPAR;
 
+	/*
+	 * The Hypervisor only allows us up to 256 interrupt
+	 * sources (the irq number is passed in a u8).
+	 */
+	virt_irq_max = 255;
+
 	return 1;
 }
 
diff --git a/arch/powerpc/platforms/powermac/low_i2c.c b/arch/powerpc/platforms/powermac/low_i2c.c
index e14f9ac55cf4..c896ce83d412 100644
--- a/arch/powerpc/platforms/powermac/low_i2c.c
+++ b/arch/powerpc/platforms/powermac/low_i2c.c
@@ -231,6 +231,14 @@ static u8 kw_i2c_wait_interrupt(struct pmac_i2c_host_kw *host)
 	return isr;
 }
 
+static void kw_i2c_do_stop(struct pmac_i2c_host_kw *host, int result)
+{
+	kw_write_reg(reg_control, KW_I2C_CTL_STOP);
+	host->state = state_stop;
+	host->result = result;
+}
+
+
 static void kw_i2c_handle_interrupt(struct pmac_i2c_host_kw *host, u8 isr)
 {
 	u8 ack;
@@ -246,42 +254,36 @@ static void kw_i2c_handle_interrupt(struct pmac_i2c_host_kw *host, u8 isr)
 	}
 
 	if (isr == 0) {
+		printk(KERN_WARNING "low_i2c: Timeout in i2c transfer"
+		       " on keywest !\n");
 		if (host->state != state_stop) {
-			DBG_LOW("KW: Timeout !\n");
-			host->result = -EIO;
-			goto stop;
-		}
-		if (host->state == state_stop) {
-			ack = kw_read_reg(reg_status);
-			if (ack & KW_I2C_STAT_BUSY)
-				kw_write_reg(reg_status, 0);
-			host->state = state_idle;
-			kw_write_reg(reg_ier, 0x00);
-			if (!host->polled)
-				complete(&host->complete);
+			kw_i2c_do_stop(host, -EIO);
+			return;
 		}
+		ack = kw_read_reg(reg_status);
+		if (ack & KW_I2C_STAT_BUSY)
+			kw_write_reg(reg_status, 0);
+		host->state = state_idle;
+		kw_write_reg(reg_ier, 0x00);
+		if (!host->polled)
+			complete(&host->complete);
 		return;
 	}
 
 	if (isr & KW_I2C_IRQ_ADDR) {
 		ack = kw_read_reg(reg_status);
 		if (host->state != state_addr) {
-			kw_write_reg(reg_isr, KW_I2C_IRQ_ADDR);
 			WRONG_STATE("KW_I2C_IRQ_ADDR"); 
-			host->result = -EIO;
-			goto stop;
+			kw_i2c_do_stop(host, -EIO);
 		}
 		if ((ack & KW_I2C_STAT_LAST_AAK) == 0) {
-			host->result = -ENODEV;
-			DBG_LOW("KW: NAK on address\n");
+			host->result = -ENXIO;
 			host->state = state_stop;
-			return;
+			DBG_LOW("KW: NAK on address\n");
 		} else {
-			if (host->len == 0) {
-				kw_write_reg(reg_isr, KW_I2C_IRQ_ADDR);
-				goto stop;
-			}
-			if (host->rw) {
+			if (host->len == 0)
+				kw_i2c_do_stop(host, 0);
+			else if (host->rw) {
 				host->state = state_read;
 				if (host->len > 1)
 					kw_write_reg(reg_control,
@@ -308,25 +310,19 @@ static void kw_i2c_handle_interrupt(struct pmac_i2c_host_kw *host, u8 isr)
 			ack = kw_read_reg(reg_status);
 			if ((ack & KW_I2C_STAT_LAST_AAK) == 0) {
 				DBG_LOW("KW: nack on data write\n");
-				host->result = -EIO;
-				goto stop;
+				host->result = -EFBIG;
+				host->state = state_stop;
 			} else if (host->len) {
 				kw_write_reg(reg_data, *(host->data++));
 				host->len--;
-			} else {
-				kw_write_reg(reg_control, KW_I2C_CTL_STOP);
-				host->state = state_stop;
-				host->result = 0;
-			}
-			kw_write_reg(reg_isr, KW_I2C_IRQ_DATA);
+			} else
+				kw_i2c_do_stop(host, 0);
 		} else {
-			kw_write_reg(reg_isr, KW_I2C_IRQ_DATA);
 			WRONG_STATE("KW_I2C_IRQ_DATA"); 
-			if (host->state != state_stop) {
-				host->result = -EIO;
-				goto stop;
-			}
+			if (host->state != state_stop)
+				kw_i2c_do_stop(host, -EIO);
 		}
+		kw_write_reg(reg_isr, KW_I2C_IRQ_DATA);
 	}
 
 	if (isr & KW_I2C_IRQ_STOP) {
@@ -340,14 +336,10 @@ static void kw_i2c_handle_interrupt(struct pmac_i2c_host_kw *host, u8 isr)
 			complete(&host->complete);
 	}
 
+	/* Below should only happen in manual mode which we don't use ... */
 	if (isr & KW_I2C_IRQ_START)
 		kw_write_reg(reg_isr, KW_I2C_IRQ_START);
 
-	return;
- stop:
-	kw_write_reg(reg_control, KW_I2C_CTL_STOP);	
-	host->state = state_stop;
-	return;
 }
 
 /* Interrupt handler */
@@ -544,11 +536,11 @@ static struct pmac_i2c_host_kw *__init kw_i2c_host_init(struct device_node *np)
 		return NULL;
 	}
 
-	/* Make sure IRA is disabled */
+	/* Make sure IRQ is disabled */
 	kw_write_reg(reg_ier, 0);
 
 	/* Request chip interrupt */
-	if (request_irq(host->irq, kw_i2c_irq, SA_SHIRQ, "keywest i2c", host))
+	if (request_irq(host->irq, kw_i2c_irq, 0, "keywest i2c", host))
 		host->irq = NO_IRQ;
 
 	printk(KERN_INFO "KeyWest i2c @0x%08x irq %d %s\n",
@@ -1165,6 +1157,7 @@ EXPORT_SYMBOL_GPL(pmac_i2c_xfer);
 /* some quirks for platform function decoding */
 enum {
 	pmac_i2c_quirk_invmask = 0x00000001u,
+	pmac_i2c_quirk_skip = 0x00000002u,
 };
 
 static void pmac_i2c_devscan(void (*callback)(struct device_node *dev,
@@ -1180,6 +1173,15 @@ static void pmac_i2c_devscan(void (*callback)(struct device_node *dev,
 		/* XXX Study device-tree's & apple drivers are get the quirks
 		 * right !
 		 */
+		/* Workaround: It seems that running the clockspreading
+		 * properties on the eMac will cause lockups during boot.
+		 * The machine seems to work fine without that. So for now,
+		 * let's make sure i2c-hwclock doesn't match about "imic"
+		 * clocks and we'll figure out if we really need to do
+		 * something special about those later.
+		 */
+		{ "i2c-hwclock", "imic5002", pmac_i2c_quirk_skip },
+		{ "i2c-hwclock", "imic5003", pmac_i2c_quirk_skip },
 		{ "i2c-hwclock", NULL, pmac_i2c_quirk_invmask },
 		{ "i2c-cpu-voltage", NULL, 0},
 		{  "temp-monitor", NULL, 0 },
@@ -1206,6 +1208,8 @@ static void pmac_i2c_devscan(void (*callback)(struct device_node *dev,
 				if (p->compatible &&
 				    !device_is_compatible(np, p->compatible))
 					continue;
+				if (p->quirks & pmac_i2c_quirk_skip)
+					break;
 				callback(np, p->quirks);
 				break;
 			}
diff --git a/arch/powerpc/platforms/powermac/pci.c b/arch/powerpc/platforms/powermac/pci.c
index f5d8d15d74fa..ea179afea632 100644
--- a/arch/powerpc/platforms/powermac/pci.c
+++ b/arch/powerpc/platforms/powermac/pci.c
@@ -1097,7 +1097,7 @@ pmac_pci_enable_device_hook(struct pci_dev *dev, int initial)
 	 * (iBook second controller)
 	 */
 	if (dev->vendor == PCI_VENDOR_ID_APPLE
-	    && (dev->class == ((PCI_CLASS_SERIAL_USB << 8) | 0x10))
+	    && dev->class == PCI_CLASS_SERIAL_USB_OHCI
 	    && !node) {
 		printk(KERN_INFO "Apple USB OHCI %s disabled by firmware\n",
 		       pci_name(dev));
diff --git a/arch/powerpc/platforms/powermac/pfunc_core.c b/arch/powerpc/platforms/powermac/pfunc_core.c
index 4baa75b1d36f..f08173b0f065 100644
--- a/arch/powerpc/platforms/powermac/pfunc_core.c
+++ b/arch/powerpc/platforms/powermac/pfunc_core.c
@@ -11,6 +11,7 @@
 #include <linux/kernel.h>
 #include <linux/spinlock.h>
 #include <linux/module.h>
+#include <linux/mutex.h>
 
 #include <asm/semaphore.h>
 #include <asm/prom.h>
@@ -546,6 +547,7 @@ struct pmf_device {
 
 static LIST_HEAD(pmf_devices);
 static spinlock_t pmf_lock = SPIN_LOCK_UNLOCKED;
+static DEFINE_MUTEX(pmf_irq_mutex);
 
 static void pmf_release_device(struct kref *kref)
 {
@@ -864,15 +866,17 @@ int pmf_register_irq_client(struct device_node *target,
 
 	spin_lock_irqsave(&pmf_lock, flags);
 	func = __pmf_find_function(target, name, PMF_FLAGS_INT_GEN);
-	if (func == NULL) {
-		spin_unlock_irqrestore(&pmf_lock, flags);
+	if (func)
+		func = pmf_get_function(func);
+	spin_unlock_irqrestore(&pmf_lock, flags);
+	if (func == NULL)
 		return -ENODEV;
-	}
+	mutex_lock(&pmf_irq_mutex);
 	if (list_empty(&func->irq_clients))
 		func->dev->handlers->irq_enable(func);
 	list_add(&client->link, &func->irq_clients);
 	client->func = func;
-	spin_unlock_irqrestore(&pmf_lock, flags);
+	mutex_unlock(&pmf_irq_mutex);
 
 	return 0;
 }
@@ -881,16 +885,16 @@ EXPORT_SYMBOL_GPL(pmf_register_irq_client);
 void pmf_unregister_irq_client(struct pmf_irq_client *client)
 {
 	struct pmf_function *func = client->func;
-	unsigned long flags;
 
 	BUG_ON(func == NULL);
 
-	spin_lock_irqsave(&pmf_lock, flags);
+	mutex_lock(&pmf_irq_mutex);
 	client->func = NULL;
 	list_del(&client->link);
 	if (list_empty(&func->irq_clients))
 		func->dev->handlers->irq_disable(func);
-	spin_unlock_irqrestore(&pmf_lock, flags);
+	mutex_unlock(&pmf_irq_mutex);
+	pmf_put_function(func);
 }
 EXPORT_SYMBOL_GPL(pmf_unregister_irq_client);
 
diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c
index 4d15e396655c..b9200fb07815 100644
--- a/arch/powerpc/platforms/powermac/setup.c
+++ b/arch/powerpc/platforms/powermac/setup.c
@@ -463,11 +463,23 @@ static int pmac_pm_finish(suspend_state_t state)
 	return 0;
 }
 
+static int pmac_pm_valid(suspend_state_t state)
+{
+	switch (state) {
+	case PM_SUSPEND_DISK:
+		return 1;
+	/* can't do any other states via generic mechanism yet */
+	default:
+		return 0;
+	}
+}
+
 static struct pm_ops pmac_pm_ops = {
 	.pm_disk_mode	= PM_DISK_SHUTDOWN,
 	.prepare	= pmac_pm_prepare,
 	.enter		= pmac_pm_enter,
 	.finish		= pmac_pm_finish,
+	.valid		= pmac_pm_valid,
 };
 
 #endif /* CONFIG_SOFTWARE_SUSPEND */
diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c
index 780fb27a0099..32eaddfa5470 100644
--- a/arch/powerpc/platforms/pseries/eeh.c
+++ b/arch/powerpc/platforms/pseries/eeh.c
@@ -957,8 +957,10 @@ static void eeh_remove_device(struct pci_dev *dev)
 	pci_addr_cache_remove_device(dev);
 
 	dn = pci_device_to_OF_node(dev);
-	PCI_DN(dn)->pcidev = NULL;
-	pci_dev_put (dev);
+	if (PCI_DN(dn)->pcidev) {
+		PCI_DN(dn)->pcidev = NULL;
+		pci_dev_put (dev);
+	}
 }
 
 void eeh_remove_bus_device(struct pci_dev *dev)
diff --git a/arch/powerpc/platforms/pseries/eeh_event.c b/arch/powerpc/platforms/pseries/eeh_event.c
index a1bda6f96fd1..40020c65c89e 100644
--- a/arch/powerpc/platforms/pseries/eeh_event.c
+++ b/arch/powerpc/platforms/pseries/eeh_event.c
@@ -118,7 +118,15 @@ int eeh_send_failure_event (struct device_node *dn,
 {
 	unsigned long flags;
 	struct eeh_event *event;
+	char *location;
 
+	if (!mem_init_done) {
+		printk(KERN_ERR "EEH: event during early boot not handled\n");
+		location = (char *) get_property(dn, "ibm,loc-code", NULL);
+		printk(KERN_ERR "EEH: device node = %s\n", dn->full_name);
+		printk(KERN_ERR "EEH: PCI location = %s\n", location);
+		return 1;
+	}
 	event = kmalloc(sizeof(*event), GFP_ATOMIC);
 	if (event == NULL) {
 		printk (KERN_ERR "EEH: out of memory, event not handled\n");
diff --git a/arch/powerpc/platforms/pseries/rtasd.c b/arch/powerpc/platforms/pseries/rtasd.c
index fcc4d561a236..e0000ce769e5 100644
--- a/arch/powerpc/platforms/pseries/rtasd.c
+++ b/arch/powerpc/platforms/pseries/rtasd.c
@@ -488,7 +488,7 @@ static int __init rtas_init(void)
 	/* No RTAS */
 	if (rtas_token("event-scan") == RTAS_UNKNOWN_SERVICE) {
 		printk(KERN_INFO "rtasd: no event-scan on system\n");
-		return 1;
+		return -ENODEV;
 	}
 
 	entry = create_proc_entry("ppc64/rtas/error_log", S_IRUSR, NULL);
diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index 5eb55ef1c91c..5f79f01c44f2 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -255,7 +255,7 @@ static int __init pSeries_init_panel(void)
 {
 	/* Manually leave the kernel version on the panel. */
 	ppc_md.progress("Linux ppc64\n", 0);
-	ppc_md.progress(system_utsname.version, 0);
+	ppc_md.progress(system_utsname.release, 0);
 
 	return 0;
 }
diff --git a/arch/powerpc/sysdev/dart_iommu.c b/arch/powerpc/sysdev/dart_iommu.c
index 61d317428610..38087bd6e3cf 100644
--- a/arch/powerpc/sysdev/dart_iommu.c
+++ b/arch/powerpc/sysdev/dart_iommu.c
@@ -49,6 +49,7 @@
 
 #include "dart.h"
 
+extern int iommu_is_off;
 extern int iommu_force_on;
 
 /* Physical base address and size of the DART table */
@@ -329,10 +330,17 @@ void iommu_init_early_dart(void)
 
 void __init alloc_dart_table(void)
 {
-	/* Only reserve DART space if machine has more than 2GB of RAM
+	/* Only reserve DART space if machine has more than 1GB of RAM
 	 * or if requested with iommu=on on cmdline.
+	 *
+	 * 1GB of RAM is picked as limit because some default devices
+	 * (i.e. Airport Extreme) have 30 bit address range limits.
 	 */
-	if (lmb_end_of_DRAM() <= 0x80000000ull && !iommu_force_on)
+
+	if (iommu_is_off)
+		return;
+
+	if (!iommu_force_on && lmb_end_of_DRAM() <= 0x40000000ull)
 		return;
 
 	/* 512 pages (2MB) is max DART tablesize. */
diff --git a/arch/ppc/kernel/asm-offsets.c b/arch/ppc/kernel/asm-offsets.c
index 77e4dc780f8c..2f5c5e157617 100644
--- a/arch/ppc/kernel/asm-offsets.c
+++ b/arch/ppc/kernel/asm-offsets.c
@@ -134,6 +134,7 @@ main(void)
 	DEFINE(TI_TASK, offsetof(struct thread_info, task));
 	DEFINE(TI_EXECDOMAIN, offsetof(struct thread_info, exec_domain));
 	DEFINE(TI_FLAGS, offsetof(struct thread_info, flags));
+	DEFINE(TI_LOCAL_FLAGS, offsetof(struct thread_info, local_flags));
 	DEFINE(TI_CPU, offsetof(struct thread_info, cpu));
 	DEFINE(TI_PREEMPT, offsetof(struct thread_info, preempt_count));
 
diff --git a/arch/ppc/kernel/entry.S b/arch/ppc/kernel/entry.S
index 5891ecbdc703..1adc9145516f 100644
--- a/arch/ppc/kernel/entry.S
+++ b/arch/ppc/kernel/entry.S
@@ -128,29 +128,26 @@ transfer_to_handler:
 	stw	r12,4(r11)
 #endif
 	b	3f
+
 2:	/* if from kernel, check interrupted DOZE/NAP mode and
          * check for stack overflow
          */
+	lwz	r9,THREAD_INFO-THREAD(r12)
+	cmplw	r1,r9			/* if r1 <= current->thread_info */
+	ble-	stack_ovf		/* then the kernel stack overflowed */
+5:
 #ifdef CONFIG_6xx
-	mfspr	r11,SPRN_HID0
-	mtcr	r11
-BEGIN_FTR_SECTION
-	bt-	8,4f			/* Check DOZE */
-END_FTR_SECTION_IFSET(CPU_FTR_CAN_DOZE)
-BEGIN_FTR_SECTION
-	bt-	9,4f			/* Check NAP */
-END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP)
+	tophys(r9,r9)			/* check local flags */
+	lwz	r12,TI_LOCAL_FLAGS(r9)
+	mtcrf	0x01,r12
+	bt-	31-TLF_NAPPING,4f
 #endif /* CONFIG_6xx */
 	.globl transfer_to_handler_cont
 transfer_to_handler_cont:
-	lwz	r11,THREAD_INFO-THREAD(r12)
-	cmplw	r1,r11			/* if r1 <= current->thread_info */
-	ble-	stack_ovf		/* then the kernel stack overflowed */
 3:
 	mflr	r9
 	lwz	r11,0(r9)		/* virtual address of handler */
 	lwz	r9,4(r9)		/* where to go when done */
-	FIX_SRR1(r10,r12)
 	mtspr	SPRN_SRR0,r11
 	mtspr	SPRN_SRR1,r10
 	mtlr	r9
@@ -158,7 +155,9 @@ transfer_to_handler_cont:
 	RFI				/* jump to handler, enable MMU */
 
 #ifdef CONFIG_6xx
-4:	b	power_save_6xx_restore
+4:	rlwinm	r12,r12,0,~_TLF_NAPPING
+	stw	r12,TI_LOCAL_FLAGS(r9)
+	b	power_save_6xx_restore
 #endif
 
 /*
@@ -167,10 +166,10 @@ transfer_to_handler_cont:
  */
 stack_ovf:
 	/* sometimes we use a statically-allocated stack, which is OK. */
-	lis	r11,_end@h
-	ori	r11,r11,_end@l
-	cmplw	r1,r11
-	ble	3b			/* r1 <= &_end is OK */
+	lis	r12,_end@h
+	ori	r12,r12,_end@l
+	cmplw	r1,r12
+	ble	5b			/* r1 <= &_end is OK */
 	SAVE_NVGPRS(r11)
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	lis	r1,init_thread_union@ha
diff --git a/arch/ppc/kernel/head_8xx.S b/arch/ppc/kernel/head_8xx.S
index ec53c7d65f2b..7a2f20583be4 100644
--- a/arch/ppc/kernel/head_8xx.S
+++ b/arch/ppc/kernel/head_8xx.S
@@ -355,9 +355,7 @@ InstructionTLBMiss:
 
 	. = 0x1200
 DataStoreTLBMiss:
-#ifdef CONFIG_8xx_CPU6
 	stw	r3, 8(r0)
-#endif
 	DO_8xx_CPU6(0x3f80, r3)
 	mtspr	SPRN_M_TW, r10	/* Save a couple of working registers */
 	mfcr	r10
@@ -417,9 +415,7 @@ DataStoreTLBMiss:
 	lwz	r11, 0(r0)
 	mtcr	r11
 	lwz	r11, 4(r0)
-#ifdef CONFIG_8xx_CPU6
 	lwz	r3, 8(r0)
-#endif
 	rfi
 
 /* This is an instruction TLB error on the MPC8xx.  This could be due
diff --git a/arch/ppc/kernel/ppc_ksyms.c b/arch/ppc/kernel/ppc_ksyms.c
index 865ba74991a9..b250b1b539b6 100644
--- a/arch/ppc/kernel/ppc_ksyms.c
+++ b/arch/ppc/kernel/ppc_ksyms.c
@@ -94,6 +94,7 @@ EXPORT_SYMBOL(strcat);
 EXPORT_SYMBOL(strlen);
 EXPORT_SYMBOL(strcmp);
 EXPORT_SYMBOL(strcasecmp);
+EXPORT_SYMBOL(strncasecmp);
 EXPORT_SYMBOL(__div64_32);
 
 EXPORT_SYMBOL(csum_partial);
diff --git a/arch/ppc/platforms/4xx/ocotea.c b/arch/ppc/platforms/4xx/ocotea.c
index f841972f1fa9..554776d4b8ac 100644
--- a/arch/ppc/platforms/4xx/ocotea.c
+++ b/arch/ppc/platforms/4xx/ocotea.c
@@ -331,7 +331,7 @@ static void __init ocotea_init(void)
 void __init platform_init(unsigned long r3, unsigned long r4,
 		unsigned long r5, unsigned long r6, unsigned long r7)
 {
-	ibm44x_platform_init(r3, r4, r5, r6, r7);
+	ibm440gx_platform_init(r3, r4, r5, r6, r7);
 
 	ppc_md.setup_arch = ocotea_setup_arch;
 	ppc_md.show_cpuinfo = ocotea_show_cpuinfo;
diff --git a/arch/ppc/platforms/mpc8272ads_setup.c b/arch/ppc/platforms/mpc8272ads_setup.c
index bc9b94f77e39..abb7154de2c7 100644
--- a/arch/ppc/platforms/mpc8272ads_setup.c
+++ b/arch/ppc/platforms/mpc8272ads_setup.c
@@ -26,11 +26,35 @@
 #include <asm/irq.h>
 #include <asm/ppc_sys.h>
 #include <asm/ppcboot.h>
+#include <linux/fs_uart_pd.h>
 
 #include "pq2ads_pd.h"
 
 static void init_fcc1_ioports(void);
 static void init_fcc2_ioports(void);
+static void init_scc1_uart_ioports(void);
+static void init_scc4_uart_ioports(void);
+
+static struct fs_uart_platform_info mpc8272_uart_pdata[] = {
+	[fsid_scc1_uart] = {
+		.init_ioports 	= init_scc1_uart_ioports,
+		.fs_no		= fsid_scc1_uart,
+		.brg		= 1,
+		.tx_num_fifo	= 4,
+		.tx_buf_size	= 32,
+		.rx_num_fifo	= 4,
+		.rx_buf_size	= 32,
+	},
+	[fsid_scc4_uart] = {
+		.init_ioports 	= init_scc4_uart_ioports,
+		.fs_no		= fsid_scc4_uart,
+		.brg		= 4,
+		.tx_num_fifo	= 4,
+		.tx_buf_size	= 32,
+		.rx_num_fifo	= 4,
+		.rx_buf_size	= 32,
+	},
+};
 
 static struct fs_mii_bus_info mii_bus_info = {
 	.method                 = fsmii_bitbang,
@@ -201,12 +225,65 @@ static void __init mpc8272ads_fixup_enet_pdata(struct platform_device *pdev,
 	}
 }
 
+static void mpc8272ads_fixup_uart_pdata(struct platform_device *pdev,
+					      int idx)
+{
+	bd_t *bd = (bd_t *) __res;
+	struct fs_uart_platform_info *pinfo;
+	int num = ARRAY_SIZE(mpc8272_uart_pdata);
+	int id = fs_uart_id_scc2fsid(idx);
+
+	/* no need to alter anything if console */
+	if ((id <= num) && (!pdev->dev.platform_data)) {
+		pinfo = &mpc8272_uart_pdata[id];
+		pinfo->uart_clk = bd->bi_intfreq;
+		pdev->dev.platform_data = pinfo;
+	}
+}
+
+static void init_scc1_uart_ioports(void)
+{
+	cpm2_map_t* immap = ioremap(CPM_MAP_ADDR, sizeof(cpm2_map_t));
+
+        /* SCC1 is only on port D */
+	setbits32(&immap->im_ioport.iop_ppard,0x00000003);
+	clrbits32(&immap->im_ioport.iop_psord,0x00000001);
+	setbits32(&immap->im_ioport.iop_psord,0x00000002);
+	clrbits32(&immap->im_ioport.iop_pdird,0x00000001);
+	setbits32(&immap->im_ioport.iop_pdird,0x00000002);
+
+        /* Wire BRG1 to SCC1 */
+	clrbits32(&immap->im_cpmux.cmx_scr,0x00ffffff);
+
+	iounmap(immap);
+}
+
+static void init_scc4_uart_ioports(void)
+{
+	cpm2_map_t* immap = ioremap(CPM_MAP_ADDR, sizeof(cpm2_map_t));
+
+	setbits32(&immap->im_ioport.iop_ppard,0x00000600);
+	clrbits32(&immap->im_ioport.iop_psord,0x00000600);
+	clrbits32(&immap->im_ioport.iop_pdird,0x00000200);
+	setbits32(&immap->im_ioport.iop_pdird,0x00000400);
+
+        /* Wire BRG4 to SCC4 */
+	clrbits32(&immap->im_cpmux.cmx_scr,0x000000ff);
+	setbits32(&immap->im_cpmux.cmx_scr,0x0000001b);
+
+	iounmap(immap);
+}
+
 static int mpc8272ads_platform_notify(struct device *dev)
 {
 	static const struct platform_notify_dev_map dev_map[] = {
 		{
 			.bus_id = "fsl-cpm-fcc",
-			.rtn = mpc8272ads_fixup_enet_pdata
+			.rtn = mpc8272ads_fixup_enet_pdata,
+		},
+		{
+			.bus_id = "fsl-cpm-scc:uart",
+			.rtn = mpc8272ads_fixup_uart_pdata,
 		},
 		{
 			.bus_id = NULL
@@ -230,7 +307,44 @@ int __init mpc8272ads_init(void)
 	ppc_sys_device_enable(MPC82xx_CPM_FCC1);
 	ppc_sys_device_enable(MPC82xx_CPM_FCC2);
 
+	/* to be ready for console, let's attach pdata here */
+#ifdef CONFIG_SERIAL_CPM_SCC1
+	ppc_sys_device_setfunc(MPC82xx_CPM_SCC1, PPC_SYS_FUNC_UART);
+	ppc_sys_device_enable(MPC82xx_CPM_SCC1);
+
+#endif
+
+#ifdef CONFIG_SERIAL_CPM_SCC4
+	ppc_sys_device_setfunc(MPC82xx_CPM_SCC4, PPC_SYS_FUNC_UART);
+	ppc_sys_device_enable(MPC82xx_CPM_SCC4);
+#endif
+
+
 	return 0;
 }
 
+/*
+   To prevent confusion, console selection is gross:
+   by 0 assumed SCC1 and by 1 assumed SCC4
+ */
+struct platform_device* early_uart_get_pdev(int index)
+{
+	bd_t *bd = (bd_t *) __res;
+	struct fs_uart_platform_info *pinfo;
+
+	struct platform_device* pdev = NULL;
+	if(index) { /*assume SCC4 here*/
+		pdev = &ppc_sys_platform_devices[MPC82xx_CPM_SCC4];
+		pinfo = &mpc8272_uart_pdata[fsid_scc4_uart];
+	} else { /*over SCC1*/
+		pdev = &ppc_sys_platform_devices[MPC82xx_CPM_SCC1];
+		pinfo = &mpc8272_uart_pdata[fsid_scc1_uart];
+	}
+
+	pinfo->uart_clk = bd->bi_intfreq;
+	pdev->dev.platform_data = pinfo;
+	ppc_sys_fixup_mem_resource(pdev, CPM_MAP_ADDR);
+	return NULL;
+}
+
 arch_initcall(mpc8272ads_init);
diff --git a/arch/ppc/platforms/mpc866ads_setup.c b/arch/ppc/platforms/mpc866ads_setup.c
index ac8fcc68afeb..d919dab61347 100644
--- a/arch/ppc/platforms/mpc866ads_setup.c
+++ b/arch/ppc/platforms/mpc866ads_setup.c
@@ -20,6 +20,7 @@
 #include <linux/device.h>
 
 #include <linux/fs_enet_pd.h>
+#include <linux/fs_uart_pd.h>
 #include <linux/mii.h>
 
 #include <asm/delay.h>
@@ -37,6 +38,11 @@
 
 extern unsigned char __res[];
 
+static void setup_fec1_ioports(void);
+static void setup_scc1_ioports(void);
+static void setup_smc1_ioports(void);
+static void setup_smc2_ioports(void);
+
 static struct fs_mii_bus_info fec_mii_bus_info = {
 	.method = fsmii_fec,
 	.id = 0,
@@ -79,6 +85,28 @@ static struct fs_platform_info mpc8xx_scc_pdata = {
 	.phy_irq = -1,
 
 	.bus_info = &scc_mii_bus_info,
+
+};
+
+static struct fs_uart_platform_info mpc866_uart_pdata[] = {
+	[fsid_smc1_uart] = {
+		.brg		= 1,
+ 		.fs_no 		= fsid_smc1_uart,
+ 		.init_ioports	= setup_smc1_ioports,
+		.tx_num_fifo	= 4,
+		.tx_buf_size	= 32,
+		.rx_num_fifo	= 4,
+		.rx_buf_size	= 32,
+ 	},
+ 	[fsid_smc2_uart] = {
+ 		.brg		= 2,
+ 		.fs_no 		= fsid_smc2_uart,
+ 		.init_ioports	= setup_smc2_ioports,
+		.tx_num_fifo	= 4,
+		.tx_buf_size	= 32,
+		.rx_num_fifo	= 4,
+		.rx_buf_size	= 32,
+ 	},
 };
 
 void __init board_init(void)
@@ -92,9 +120,12 @@ void __init board_init(void)
 		printk(KERN_CRIT "Could not remap BCSR1\n");
 		return;
 	}
+
 #ifdef CONFIG_SERIAL_CPM_SMC1
 	cp->cp_simode &= ~(0xe0000000 >> 17);	/* brg1 */
 	clrbits32(bcsr_io,(0x80000000 >> 7));
+	cp->cp_smc[0].smc_smcm |= (SMCM_RX | SMCM_TX);
+	cp->cp_smc[0].smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
 #else
 	setbits32(bcsr_io,(0x80000000 >> 7));
 
@@ -108,6 +139,8 @@ void __init board_init(void)
 	cp->cp_simode &= ~(0xe0000000 >> 1);
 	cp->cp_simode |= (0x20000000 >> 1);	/* brg2 */
 	clrbits32(bcsr_io,(0x80000000 >> 13));
+	cp->cp_smc[1].smc_smcm |= (SMCM_RX | SMCM_TX);
+	cp->cp_smc[1].smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
 #else
 	clrbits32(bcsr_io,(0x80000000 >> 13));
 	cp->cp_pbpar &= ~(0x00000c00);
@@ -232,6 +265,74 @@ static void mpc866ads_fixup_scc_enet_pdata(struct platform_device *pdev,
 	mpc866ads_fixup_enet_pdata(pdev, fsid_scc1 + pdev->id - 1);
 }
 
+static void setup_smc1_ioports(void)
+{
+	immap_t *immap = (immap_t *) IMAP_ADDR;
+	unsigned *bcsr_io;
+	unsigned int iobits = 0x000000c0;
+
+	bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
+
+	if (bcsr_io == NULL) {
+		printk(KERN_CRIT "Could not remap BCSR1\n");
+		return;
+	}
+
+	clrbits32(bcsr_io,BCSR1_RS232EN_1);
+	iounmap(bcsr_io);
+
+	setbits32(&immap->im_cpm.cp_pbpar, iobits);
+	clrbits32(&immap->im_cpm.cp_pbdir, iobits);
+	clrbits16(&immap->im_cpm.cp_pbodr, iobits);
+
+}
+
+static void setup_smc2_ioports(void)
+{
+	immap_t *immap = (immap_t *) IMAP_ADDR;
+	unsigned *bcsr_io;
+	unsigned int iobits = 0x00000c00;
+
+	bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
+
+	if (bcsr_io == NULL) {
+		printk(KERN_CRIT "Could not remap BCSR1\n");
+		return;
+	}
+
+	clrbits32(bcsr_io,BCSR1_RS232EN_2);
+
+	iounmap(bcsr_io);
+
+#ifndef CONFIG_SERIAL_CPM_ALT_SMC2
+	setbits32(&immap->im_cpm.cp_pbpar, iobits);
+	clrbits32(&immap->im_cpm.cp_pbdir, iobits);
+	clrbits16(&immap->im_cpm.cp_pbodr, iobits);
+#else
+	setbits16(&immap->im_ioport.iop_papar, iobits);
+	clrbits16(&immap->im_ioport.iop_padir, iobits);
+	clrbits16(&immap->im_ioport.iop_paodr, iobits);
+#endif
+
+}
+
+static void __init mpc866ads_fixup_uart_pdata(struct platform_device *pdev,
+                                              int idx)
+{
+	bd_t *bd = (bd_t *) __res;
+	struct fs_uart_platform_info *pinfo;
+	int num = ARRAY_SIZE(mpc866_uart_pdata);
+
+	int id = fs_uart_id_smc2fsid(idx);
+
+	/* no need to alter anything if console */
+	if ((id <= num) && (!pdev->dev.platform_data)) {
+		pinfo = &mpc866_uart_pdata[id];
+		pinfo->uart_clk = bd->bi_intfreq;
+		pdev->dev.platform_data = pinfo;
+	}
+}
+
 static int mpc866ads_platform_notify(struct device *dev)
 {
 	static const struct platform_notify_dev_map dev_map[] = {
@@ -244,6 +345,10 @@ static int mpc866ads_platform_notify(struct device *dev)
 			.rtn = mpc866ads_fixup_scc_enet_pdata,
 		},
 		{
+			.bus_id = "fsl-cpm-smc:uart",
+			.rtn = mpc866ads_fixup_uart_pdata
+		},
+		{
 			.bus_id = NULL
 		}
 	};
@@ -267,7 +372,42 @@ int __init mpc866ads_init(void)
 #endif
 	ppc_sys_device_enable(MPC8xx_CPM_FEC1);
 
+/* Since either of the uarts could be used as console, they need to ready */
+#ifdef CONFIG_SERIAL_CPM_SMC1
+	ppc_sys_device_enable(MPC8xx_CPM_SMC1);
+	ppc_sys_device_setfunc(MPC8xx_CPM_SMC1, PPC_SYS_FUNC_UART);
+#endif
+
+#ifdef CONFIG_SERIAL_CPM_SMC
+	ppc_sys_device_enable(MPC8xx_CPM_SMC2);
+	ppc_sys_device_setfunc(MPC8xx_CPM_SMC2, PPC_SYS_FUNC_UART);
+#endif
+
 	return 0;
 }
 
+/*
+   To prevent confusion, console selection is gross:
+   by 0 assumed SMC1 and by 1 assumed SMC2
+ */
+struct platform_device* early_uart_get_pdev(int index)
+{
+	bd_t *bd = (bd_t *) __res;
+	struct fs_uart_platform_info *pinfo;
+
+	struct platform_device* pdev = NULL;
+	if(index) { /*assume SMC2 here*/
+		pdev = &ppc_sys_platform_devices[MPC8xx_CPM_SMC2];
+		pinfo = &mpc866_uart_pdata[1];
+	} else { /*over SMC1*/
+		pdev = &ppc_sys_platform_devices[MPC8xx_CPM_SMC1];
+		pinfo = &mpc866_uart_pdata[0];
+	}
+
+	pinfo->uart_clk = bd->bi_intfreq;
+	pdev->dev.platform_data = pinfo;
+	ppc_sys_fixup_mem_resource(pdev, IMAP_ADDR);
+	return NULL;
+}
+
 arch_initcall(mpc866ads_init);
diff --git a/arch/ppc/platforms/mpc885ads_setup.c b/arch/ppc/platforms/mpc885ads_setup.c
index 50a99e5f7c68..4b88679cd31c 100644
--- a/arch/ppc/platforms/mpc885ads_setup.c
+++ b/arch/ppc/platforms/mpc885ads_setup.c
@@ -20,6 +20,7 @@
 #include <linux/device.h>
 
 #include <linux/fs_enet_pd.h>
+#include <linux/fs_uart_pd.h>
 #include <linux/mii.h>
 
 #include <asm/delay.h>
@@ -35,9 +36,32 @@
 #include <asm/ppc_sys.h>
 
 extern unsigned char __res[];
+static void setup_smc1_ioports(void);
+static void setup_smc2_ioports(void);
 
 static void __init mpc885ads_scc_phy_init(char);
 
+static struct fs_uart_platform_info mpc885_uart_pdata[] = {
+	[fsid_smc1_uart] = {
+		.brg		= 1,
+ 		.fs_no 		= fsid_smc1_uart,
+ 		.init_ioports	= setup_smc1_ioports,
+		.tx_num_fifo	= 4,
+		.tx_buf_size	= 32,
+		.rx_num_fifo	= 4,
+		.rx_buf_size	= 32,
+ 	},
+ 	[fsid_smc2_uart] = {
+ 		.brg		= 2,
+ 		.fs_no 		= fsid_smc2_uart,
+ 		.init_ioports	= setup_smc2_ioports,
+		.tx_num_fifo	= 4,
+		.tx_buf_size	= 32,
+		.rx_num_fifo	= 4,
+		.rx_buf_size	= 32,
+ 	},
+};
+
 static struct fs_mii_bus_info fec_mii_bus_info = {
 	.method = fsmii_fec,
 	.id = 0,
@@ -116,6 +140,8 @@ void __init board_init(void)
 #ifdef CONFIG_SERIAL_CPM_SMC1
 	cp->cp_simode &= ~(0xe0000000 >> 17);	/* brg1 */
 	clrbits32(bcsr_io, BCSR1_RS232EN_1);
+        cp->cp_smc[0].smc_smcm |= (SMCM_RX | SMCM_TX);
+        cp->cp_smc[0].smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
 #else
 	setbits32(bcsr_io,BCSR1_RS232EN_1);
 	cp->cp_smc[0].smc_smcmr = 0;
@@ -126,6 +152,8 @@ void __init board_init(void)
 	cp->cp_simode &= ~(0xe0000000 >> 1);
 	cp->cp_simode |= (0x20000000 >> 1);	/* brg2 */
 	clrbits32(bcsr_io,BCSR1_RS232EN_2);
+        cp->cp_smc[1].smc_smcm |= (SMCM_RX | SMCM_TX);
+        cp->cp_smc[1].smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
 #else
 	setbits32(bcsr_io,BCSR1_RS232EN_2);
 	cp->cp_smc[1].smc_smcmr = 0;
@@ -343,6 +371,70 @@ static void mpc885ads_scc_phy_init(char phy_addr)
 	out_be32(&fecp->fec_mii_speed, 0);
 }
 
+static void setup_smc1_ioports(void)
+{
+        immap_t *immap = (immap_t *) IMAP_ADDR;
+        unsigned *bcsr_io;
+        unsigned int iobits = 0x000000c0;
+
+        bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
+
+        if (bcsr_io == NULL) {
+                printk(KERN_CRIT "Could not remap BCSR1\n");
+                return;
+        }
+        clrbits32(bcsr_io,BCSR1_RS232EN_1);
+        iounmap(bcsr_io);
+
+        setbits32(&immap->im_cpm.cp_pbpar, iobits);
+        clrbits32(&immap->im_cpm.cp_pbdir, iobits);
+        clrbits16(&immap->im_cpm.cp_pbodr, iobits);
+}
+
+static void setup_smc2_ioports(void)
+{
+        immap_t *immap = (immap_t *) IMAP_ADDR;
+        unsigned *bcsr_io;
+        unsigned int iobits = 0x00000c00;
+
+        bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
+
+        if (bcsr_io == NULL) {
+                printk(KERN_CRIT "Could not remap BCSR1\n");
+                return;
+        }
+        clrbits32(bcsr_io,BCSR1_RS232EN_2);
+        iounmap(bcsr_io);
+
+#ifndef CONFIG_SERIAL_CPM_ALT_SMC2
+        setbits32(&immap->im_cpm.cp_pbpar, iobits);
+        clrbits32(&immap->im_cpm.cp_pbdir, iobits);
+        clrbits16(&immap->im_cpm.cp_pbodr, iobits);
+#else
+        setbits16(&immap->im_ioport.iop_papar, iobits);
+        clrbits16(&immap->im_ioport.iop_padir, iobits);
+        clrbits16(&immap->im_ioport.iop_paodr, iobits);
+#endif
+}
+
+static void __init mpc885ads_fixup_uart_pdata(struct platform_device *pdev,
+                                              int idx)
+{
+	bd_t *bd = (bd_t *) __res;
+	struct fs_uart_platform_info *pinfo;
+	int num = ARRAY_SIZE(mpc885_uart_pdata);
+
+	int id = fs_uart_id_smc2fsid(idx);
+
+	/* no need to alter anything if console */
+	if ((id <= num) && (!pdev->dev.platform_data)) {
+		pinfo = &mpc885_uart_pdata[id];
+		pinfo->uart_clk = bd->bi_intfreq;
+		pdev->dev.platform_data = pinfo;
+	}
+}
+
+
 static int mpc885ads_platform_notify(struct device *dev)
 {
 
@@ -356,12 +448,17 @@ static int mpc885ads_platform_notify(struct device *dev)
 			.rtn = mpc885ads_fixup_scc_enet_pdata,
 		},
 		{
+			.bus_id = "fsl-cpm-smc:uart",
+			.rtn = mpc885ads_fixup_uart_pdata
+		},
+		{
 			.bus_id = NULL
 		}
 	};
 
 	platform_notify_map(dev_map,dev);
 
+	return 0;
 }
 
 int __init mpc885ads_init(void)
@@ -383,7 +480,41 @@ int __init mpc885ads_init(void)
 	ppc_sys_device_enable(MPC8xx_CPM_FEC2);
 #endif
 
+#ifdef CONFIG_SERIAL_CPM_SMC1
+	ppc_sys_device_enable(MPC8xx_CPM_SMC1);
+	ppc_sys_device_setfunc(MPC8xx_CPM_SMC1, PPC_SYS_FUNC_UART);
+#endif
+
+#ifdef CONFIG_SERIAL_CPM_SMC2
+	ppc_sys_device_enable(MPC8xx_CPM_SMC2);
+	ppc_sys_device_setfunc(MPC8xx_CPM_SMC2, PPC_SYS_FUNC_UART);
+#endif
 	return 0;
 }
 
 arch_initcall(mpc885ads_init);
+
+/*
+   To prevent confusion, console selection is gross:
+   by 0 assumed SMC1 and by 1 assumed SMC2
+ */
+struct platform_device* early_uart_get_pdev(int index)
+{
+	bd_t *bd = (bd_t *) __res;
+	struct fs_uart_platform_info *pinfo;
+
+	struct platform_device* pdev = NULL;
+	if(index) { /*assume SMC2 here*/
+		pdev = &ppc_sys_platform_devices[MPC8xx_CPM_SMC2];
+		pinfo = &mpc885_uart_pdata[1];
+	} else { /*over SMC1*/
+		pdev = &ppc_sys_platform_devices[MPC8xx_CPM_SMC1];
+		pinfo = &mpc885_uart_pdata[0];
+	}
+
+	pinfo->uart_clk = bd->bi_intfreq;
+	pdev->dev.platform_data = pinfo;
+	ppc_sys_fixup_mem_resource(pdev, IMAP_ADDR);
+	return NULL;
+}
+
diff --git a/arch/ppc/platforms/pq2ads.c b/arch/ppc/platforms/pq2ads.c
index 3365fd788a7a..7fc2e02f5246 100644
--- a/arch/ppc/platforms/pq2ads.c
+++ b/arch/ppc/platforms/pq2ads.c
@@ -14,11 +14,40 @@
 
 #include <linux/init.h>
 
+#include <asm/io.h>
 #include <asm/mpc8260.h>
+#include <asm/cpm2.h>
+#include <asm/immap_cpm2.h>
 
 void __init
 m82xx_board_setup(void)
 {
+	cpm2_map_t* immap = ioremap(CPM_MAP_ADDR, sizeof(cpm2_map_t));
+	u32 *bcsr = ioremap(BCSR_ADDR+4, sizeof(u32));
+
 	/* Enable the 2nd UART port */
-	*(volatile uint *)(BCSR_ADDR + 4) &= ~BCSR1_RS232_EN2;
+	clrbits32(bcsr, BCSR1_RS232_EN2);
+
+#ifdef CONFIG_SERIAL_CPM_SCC1
+	clrbits32((u32*)&immap->im_scc[0].scc_sccm, UART_SCCM_TX | UART_SCCM_RX);
+	clrbits32((u32*)&immap->im_scc[0].scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+#endif
+
+#ifdef CONFIG_SERIAL_CPM_SCC2
+	clrbits32((u32*)&immap->im_scc[1].scc_sccm, UART_SCCM_TX | UART_SCCM_RX);
+	clrbits32((u32*)&immap->im_scc[1].scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+#endif
+
+#ifdef CONFIG_SERIAL_CPM_SCC3
+	clrbits32((u32*)&immap->im_scc[2].scc_sccm, UART_SCCM_TX | UART_SCCM_RX);
+	clrbits32((u32*)&immap->im_scc[2].scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+#endif
+
+#ifdef CONFIG_SERIAL_CPM_SCC4
+	clrbits32((u32*)&immap->im_scc[3].scc_sccm, UART_SCCM_TX | UART_SCCM_RX);
+	clrbits32((u32*)&immap->im_scc[3].scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+#endif
+
+	iounmap(bcsr);
+	iounmap(immap);
 }
diff --git a/arch/ppc/syslib/ibm440gx_common.c b/arch/ppc/syslib/ibm440gx_common.c
index a7dd55f1c63e..f6cc16888527 100644
--- a/arch/ppc/syslib/ibm440gx_common.c
+++ b/arch/ppc/syslib/ibm440gx_common.c
@@ -2,7 +2,7 @@
  * PPC440GX system library
  *
  * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
- * Copyright (c) 2003, 2004 Zultys Technologies
+ * Copyright (c) 2003 - 2006 Zultys Technologies
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -282,3 +282,14 @@ int ibm440gx_show_cpuinfo(struct seq_file *m){
 	return 0;
 }
 
+void __init ibm440gx_platform_init(unsigned long r3, unsigned long r4,
+				   unsigned long r5, unsigned long r6,
+				   unsigned long r7)
+{
+	/* Erratum 440_43 workaround, disable L1 cache parity checking */
+	if (!strcmp(cur_cpu_spec->cpu_name, "440GX Rev. C") ||
+	    !strcmp(cur_cpu_spec->cpu_name, "440GX Rev. F"))
+		mtspr(SPRN_CCR1, mfspr(SPRN_CCR1) | CCR1_DPC);
+
+	ibm44x_platform_init(r3, r4, r5, r6, r7);
+}
diff --git a/arch/ppc/syslib/ibm440gx_common.h b/arch/ppc/syslib/ibm440gx_common.h
index a2ab9fab8e34..a03ec6022e8f 100644
--- a/arch/ppc/syslib/ibm440gx_common.h
+++ b/arch/ppc/syslib/ibm440gx_common.h
@@ -29,6 +29,10 @@
 void ibm440gx_get_clocks(struct ibm44x_clocks*, unsigned int sys_clk,
 	unsigned int ser_clk) __init;
 
+/* common 440GX platform init */
+void ibm440gx_platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+			    unsigned long r6, unsigned long r7) __init;
+
 /* Enable L2 cache */
 void ibm440gx_l2c_enable(void) __init;
 
diff --git a/arch/ppc/syslib/mpc8xx_devices.c b/arch/ppc/syslib/mpc8xx_devices.c
index bd41ed83beb3..6f536383866e 100644
--- a/arch/ppc/syslib/mpc8xx_devices.c
+++ b/arch/ppc/syslib/mpc8xx_devices.c
@@ -170,12 +170,18 @@ struct platform_device ppc_sys_platform_devices[] = {
 	[MPC8xx_CPM_SMC1] = {
 		.name = "fsl-cpm-smc",
 		.id	= 1,
-		.num_resources	= 2,
+		.num_resources	= 3,
 		.resource = (struct resource[]) {
 			{
 				.name	= "regs",
-				.start	= 0xa82,
-				.end	= 0xa91,
+				.start	= 0xa80,
+				.end	= 0xa8f,
+				.flags	= IORESOURCE_MEM,
+			},
+			{
+				.name	= "pram",
+				.start	= 0x3e80,
+				.end	= 0x3ebf,
 				.flags	= IORESOURCE_MEM,
 			},
 			{
@@ -189,15 +195,22 @@ struct platform_device ppc_sys_platform_devices[] = {
 	[MPC8xx_CPM_SMC2] = {
 		.name = "fsl-cpm-smc",
 		.id	= 2,
-		.num_resources	= 2,
+		.num_resources	= 3,
 		.resource = (struct resource[]) {
 			{
 				.name	= "regs",
-				.start	= 0xa92,
-				.end	= 0xaa1,
+				.start	= 0xa90,
+				.end	= 0xa9f,
 				.flags	= IORESOURCE_MEM,
 			},
 			{
+ 				.name	= "pram",
+ 				.start	= 0x3f80,
+ 				.end	= 0x3fbf,
+ 				.flags	= IORESOURCE_MEM,
+
+			},
+			{
 				.name	= "interrupt",
 				.start	= MPC8xx_INT_SMC2,
 				.end	= MPC8xx_INT_SMC2,
diff --git a/arch/ppc/syslib/ppc_sys.c b/arch/ppc/syslib/ppc_sys.c
index 60c724e11584..2d48018b71d9 100644
--- a/arch/ppc/syslib/ppc_sys.c
+++ b/arch/ppc/syslib/ppc_sys.c
@@ -109,9 +109,11 @@ ppc_sys_fixup_mem_resource(struct platform_device *pdev, phys_addr_t paddr)
 	int i;
 	for (i = 0; i < pdev->num_resources; i++) {
 		struct resource *r = &pdev->resource[i];
-		if ((r->flags & IORESOURCE_MEM) == IORESOURCE_MEM) {
+		if (((r->flags & IORESOURCE_MEM) == IORESOURCE_MEM) && 
+			((r->flags & PPC_SYS_IORESOURCE_FIXUPPED) != PPC_SYS_IORESOURCE_FIXUPPED)) {
 			r->start += paddr;
 			r->end += paddr;
+			r->flags |= PPC_SYS_IORESOURCE_FIXUPPED;
 		}
 	}
 }
@@ -156,12 +158,13 @@ void platform_notify_map(const struct platform_notify_dev_map *map,
 	while (map->bus_id != NULL) {
 		idx = -1;
 		s = strrchr(dev->bus_id, '.');
-		if (s != NULL)
+		if (s != NULL) {
 			idx = (int)simple_strtol(s + 1, NULL, 10);
-		else
+			len = s - dev->bus_id;
+		} else {
 			s = dev->bus_id;
-
-		len = s - dev->bus_id;
+			len = strlen(dev->bus_id);
+		}
 
 		if (!strncmp(dev->bus_id, map->bus_id, len)) {
 			pdev = container_of(dev, struct platform_device, dev);
diff --git a/arch/ppc/syslib/pq2_devices.c b/arch/ppc/syslib/pq2_devices.c
index 0636aed7b827..8692d00c08c4 100644
--- a/arch/ppc/syslib/pq2_devices.c
+++ b/arch/ppc/syslib/pq2_devices.c
@@ -121,13 +121,13 @@ struct platform_device ppc_sys_platform_devices[] = {
 		.num_resources	 = 3,
 		.resource = (struct resource[]) {
 			{
-				.name	= "scc_mem",
+				.name	= "regs",
 				.start	= 0x11A00,
 				.end	= 0x11A1F,
 				.flags	= IORESOURCE_MEM,
 			},
 			{
-				.name	= "scc_pram",
+				.name	= "pram",
 				.start	= 0x8000,
 				.end	= 0x80ff,
 				.flags	= IORESOURCE_MEM,
@@ -145,13 +145,13 @@ struct platform_device ppc_sys_platform_devices[] = {
 		.num_resources	 = 3,
 		.resource = (struct resource[]) {
 			{
-				.name	= "scc_mem",
+				.name	= "regs",
 				.start	= 0x11A20,
 				.end	= 0x11A3F,
 				.flags	= IORESOURCE_MEM,
 			},
 			{
-				.name	= "scc_pram",
+				.name	= "pram",
 				.start	= 0x8100,
 				.end	= 0x81ff,
 				.flags	= IORESOURCE_MEM,
@@ -169,13 +169,13 @@ struct platform_device ppc_sys_platform_devices[] = {
 		.num_resources	 = 3,
 		.resource = (struct resource[]) {
 			{
-				.name 	= "scc_mem",
+				.name 	= "regs",
 				.start	= 0x11A40,
 				.end	= 0x11A5F,
 				.flags	= IORESOURCE_MEM,
 			},
 			{
-				.name	= "scc_pram",
+				.name	= "pram",
 				.start	= 0x8200,
 				.end	= 0x82ff,
 				.flags	= IORESOURCE_MEM,
@@ -193,13 +193,13 @@ struct platform_device ppc_sys_platform_devices[] = {
 		.num_resources	 = 3,
 		.resource = (struct resource[]) {
 			{
-				.name	= "scc_mem",
+				.name	= "regs",
 				.start	= 0x11A60,
 				.end	= 0x11A7F,
 				.flags	= IORESOURCE_MEM,
 			},
 			{
-				.name	= "scc_pram",
+				.name	= "pram",
 				.start	= 0x8300,
 				.end	= 0x83ff,
 				.flags	= IORESOURCE_MEM,
diff --git a/arch/ppc/syslib/pq2_sys.c b/arch/ppc/syslib/pq2_sys.c
index 75e64f1c144d..fee8948162b9 100644
--- a/arch/ppc/syslib/pq2_sys.c
+++ b/arch/ppc/syslib/pq2_sys.c
@@ -113,13 +113,13 @@ struct ppc_sys_spec ppc_sys_specs[] = {
 		.ppc_sys_name	= "8248",
 		.mask		= 0x0000ff00,
 		.value		= 0x00000c00,
-		.num_devices	= 11,
+		.num_devices	= 12,
 		.device_list = (enum ppc_sys_devices[])
 		{
 			MPC82xx_CPM_FCC1, MPC82xx_CPM_FCC2, MPC82xx_CPM_SCC1,
-			MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3, MPC82xx_CPM_SMC1,
-			MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI, MPC82xx_CPM_I2C,
-			MPC82xx_CPM_USB, MPC82xx_SEC1,
+			MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3, MPC82xx_CPM_SCC4,
+			MPC82xx_CPM_SMC1, MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI,
+			MPC82xx_CPM_I2C, MPC82xx_CPM_USB, MPC82xx_SEC1,
 		},
 	},
 	{
@@ -139,13 +139,13 @@ struct ppc_sys_spec ppc_sys_specs[] = {
 		.ppc_sys_name	= "8272",
 		.mask		= 0x0000ff00,
 		.value		= 0x00000c00,
-		.num_devices	= 11,
+		.num_devices	= 12,
 		.device_list = (enum ppc_sys_devices[])
 		{
 			MPC82xx_CPM_FCC1, MPC82xx_CPM_FCC2, MPC82xx_CPM_SCC1,
-			MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3, MPC82xx_CPM_SMC1,
-			MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI, MPC82xx_CPM_I2C,
-			MPC82xx_CPM_USB, MPC82xx_SEC1,
+			MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3, MPC82xx_CPM_SCC4,
+			MPC82xx_CPM_SMC1, MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI,
+			MPC82xx_CPM_I2C, MPC82xx_CPM_USB, MPC82xx_SEC1,
 		},
 	},
 	/* below is a list of the 8280 family of processors */
diff --git a/arch/s390/appldata/appldata_base.c b/arch/s390/appldata/appldata_base.c
index 54d35c130907..9a22434a580c 100644
--- a/arch/s390/appldata/appldata_base.c
+++ b/arch/s390/appldata/appldata_base.c
@@ -652,7 +652,7 @@ appldata_cpu_notify(struct notifier_block *self,
 	return NOTIFY_OK;
 }
 
-static struct notifier_block __devinitdata appldata_nb = {
+static struct notifier_block appldata_nb = {
 	.notifier_call = appldata_cpu_notify,
 };
 
diff --git a/arch/s390/kernel/compat_signal.c b/arch/s390/kernel/compat_signal.c
index 5291b5f8788d..b4c815d8ef75 100644
--- a/arch/s390/kernel/compat_signal.c
+++ b/arch/s390/kernel/compat_signal.c
@@ -430,7 +430,7 @@ get_sigframe(struct k_sigaction *ka, struct pt_regs * regs, size_t frame_size)
 
 	/* This is the X/Open sanctioned signal stack switching.  */
 	if (ka->sa.sa_flags & SA_ONSTACK) {
-		if (! on_sig_stack(sp))
+		if (! sas_ss_flags(sp))
 			sp = current->sas_ss_sp + current->sas_ss_size;
 	}
 
diff --git a/arch/s390/kernel/compat_wrapper.S b/arch/s390/kernel/compat_wrapper.S
index 199da68bd7be..4d53b2739357 100644
--- a/arch/s390/kernel/compat_wrapper.S
+++ b/arch/s390/kernel/compat_wrapper.S
@@ -1608,3 +1608,53 @@ compat_sys_ppoll_wrapper:
 sys_unshare_wrapper:
 	llgfr	%r2,%r2			# unsigned long
 	jg	sys_unshare
+
+	.globl compat_sys_set_robust_list_wrapper
+compat_sys_set_robust_list_wrapper:
+	llgtr	%r2,%r2			# struct compat_robust_list_head *
+	llgfr	%r3,%r3			# size_t
+	jg	compat_sys_set_robust_list
+
+	.globl compat_sys_get_robust_list_wrapper
+compat_sys_get_robust_list_wrapper:
+	lgfr	%r2,%r2			# int
+	llgtr	%r3,%r3			# compat_uptr_t_t *
+	llgtr	%r4,%r4			# compat_size_t *
+	jg	compat_sys_get_robust_list
+
+	.globl sys_splice_wrapper
+sys_splice_wrapper:
+	lgfr	%r2,%r2			# int
+	llgtr	%r3,%r3			# loff_t *
+	lgfr	%r4,%r4			# int
+	llgtr	%r5,%r5			# loff_t *
+	llgfr	%r6,%r6			# size_t
+	llgf	%r0,164(%r15)		# unsigned int
+	stg	%r0,160(%r15)
+	jg	sys_splice
+
+	.globl	sys_sync_file_range_wrapper
+sys_sync_file_range_wrapper:
+	lgfr	%r2,%r2			# int
+	sllg	%r3,%r3,32		# get high word of 64bit loff_t
+	or	%r3,%r4			# get low word of 64bit loff_t
+	sllg	%r4,%r5,32		# get high word of 64bit loff_t
+	or	%r4,%r6			# get low word of 64bit loff_t
+	llgf	%r5,164(%r15)		# unsigned int
+	jg	sys_sync_file_range
+
+	.globl	sys_tee_wrapper
+sys_tee_wrapper:
+	lgfr	%r2,%r2			# int
+	lgfr	%r3,%r3			# int
+	llgfr	%r4,%r4			# size_t
+	llgfr	%r5,%r5			# unsigned int
+	jg	sys_tee
+
+	.globl compat_sys_vmsplice_wrapper
+compat_sys_vmsplice_wrapper:
+	lgfr	%r2,%r2			# int
+	llgtr	%r3,%r3			# compat_iovec *
+	llgfr	%r4,%r4			# unsigned int
+	llgfr	%r5,%r5			# unsigned int
+	jg	compat_sys_vmsplice
diff --git a/arch/s390/kernel/ptrace.c b/arch/s390/kernel/ptrace.c
index 37dfe33dab73..8f36504075ed 100644
--- a/arch/s390/kernel/ptrace.c
+++ b/arch/s390/kernel/ptrace.c
@@ -734,7 +734,7 @@ asmlinkage void
 syscall_trace(struct pt_regs *regs, int entryexit)
 {
 	if (unlikely(current->audit_context) && entryexit)
-		audit_syscall_exit(current, AUDITSC_RESULT(regs->gprs[2]), regs->gprs[2]);
+		audit_syscall_exit(AUDITSC_RESULT(regs->gprs[2]), regs->gprs[2]);
 
 	if (!test_thread_flag(TIF_SYSCALL_TRACE))
 		goto out;
@@ -761,8 +761,7 @@ syscall_trace(struct pt_regs *regs, int entryexit)
 	}
  out:
 	if (unlikely(current->audit_context) && !entryexit)
-		audit_syscall_entry(current, 
-				    test_thread_flag(TIF_31BIT)?AUDIT_ARCH_S390:AUDIT_ARCH_S390X,
+		audit_syscall_entry(test_thread_flag(TIF_31BIT)?AUDIT_ARCH_S390:AUDIT_ARCH_S390X,
 				    regs->gprs[2], regs->orig_gpr2, regs->gprs[3],
 				    regs->gprs[4], regs->gprs[5]);
 }
diff --git a/arch/s390/kernel/signal.c b/arch/s390/kernel/signal.c
index ae1927e48cfb..d48cfc726b68 100644
--- a/arch/s390/kernel/signal.c
+++ b/arch/s390/kernel/signal.c
@@ -358,8 +358,9 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 	} else {
                 regs->gprs[14] = (unsigned long)
 			frame->retcode | PSW_ADDR_AMODE;
-		err |= __put_user(S390_SYSCALL_OPCODE | __NR_rt_sigreturn,
-	                          (u16 __user *)(frame->retcode));
+		if (__put_user(S390_SYSCALL_OPCODE | __NR_rt_sigreturn,
+			       (u16 __user *)(frame->retcode)))
+			goto give_sigsegv;
 	}
 
 	/* Set up backchain. */
diff --git a/arch/s390/kernel/syscalls.S b/arch/s390/kernel/syscalls.S
index 2f56654da821..93be1d56c036 100644
--- a/arch/s390/kernel/syscalls.S
+++ b/arch/s390/kernel/syscalls.S
@@ -312,3 +312,9 @@ SYSCALL(sys_faccessat,sys_faccessat,sys_faccessat_wrapper)	/* 300 */
 SYSCALL(sys_pselect6,sys_pselect6,compat_sys_pselect6_wrapper)
 SYSCALL(sys_ppoll,sys_ppoll,compat_sys_ppoll_wrapper)
 SYSCALL(sys_unshare,sys_unshare,sys_unshare_wrapper)
+SYSCALL(sys_set_robust_list,sys_set_robust_list,compat_sys_set_robust_list_wrapper)
+SYSCALL(sys_get_robust_list,sys_get_robust_list,compat_sys_get_robust_list_wrapper)
+SYSCALL(sys_splice,sys_splice,sys_splice_wrapper)
+SYSCALL(sys_sync_file_range,sys_sync_file_range,sys_sync_file_range_wrapper)
+SYSCALL(sys_tee,sys_tee,sys_tee_wrapper)
+SYSCALL(sys_vmsplice,sys_vmsplice,compat_sys_vmsplice_wrapper)
diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c
index fea043b69b91..2a6c6efb6865 100644
--- a/arch/s390/kernel/time.c
+++ b/arch/s390/kernel/time.c
@@ -249,18 +249,19 @@ static inline void stop_hz_timer(void)
 	unsigned long flags;
 	unsigned long seq, next;
 	__u64 timer, todval;
+	int cpu = smp_processor_id();
 
 	if (sysctl_hz_timer != 0)
 		return;
 
-	cpu_set(smp_processor_id(), nohz_cpu_mask);
+	cpu_set(cpu, nohz_cpu_mask);
 
 	/*
 	 * Leave the clock comparator set up for the next timer
 	 * tick if either rcu or a softirq is pending.
 	 */
-	if (rcu_pending(smp_processor_id()) || local_softirq_pending()) {
-		cpu_clear(smp_processor_id(), nohz_cpu_mask);
+	if (rcu_needs_cpu(cpu) || local_softirq_pending()) {
+		cpu_clear(cpu, nohz_cpu_mask);
 		return;
 	}
 
@@ -271,7 +272,7 @@ static inline void stop_hz_timer(void)
 	next = next_timer_interrupt();
 	do {
 		seq = read_seqbegin_irqsave(&xtime_lock, flags);
-		timer = (__u64)(next - jiffies) + jiffies_64;
+		timer = ((__u64) next) - ((__u64) jiffies) + jiffies_64;
 	} while (read_seqretry_irqrestore(&xtime_lock, seq, flags));
 	todval = -1ULL;
 	/* Be careful about overflows. */
diff --git a/arch/s390/kernel/vmlinux.lds.S b/arch/s390/kernel/vmlinux.lds.S
index 9289face3027..9f34bb54c051 100644
--- a/arch/s390/kernel/vmlinux.lds.S
+++ b/arch/s390/kernel/vmlinux.lds.S
@@ -58,9 +58,11 @@ SECTIONS
   . = ALIGN(4096);
   .data.page_aligned : { *(.data.idt) }
 
-  . = ALIGN(32);
+  . = ALIGN(256);
   .data.cacheline_aligned : { *(.data.cacheline_aligned) }
 
+  . = ALIGN(256);
+  .data.read_mostly : { *(.data.read_mostly) }
   _edata = .;			/* End of data section */
 
   . = ALIGN(8192);		/* init_task */
diff --git a/arch/s390/mm/extmem.c b/arch/s390/mm/extmem.c
index a9566bcab682..9b11e3e20903 100644
--- a/arch/s390/mm/extmem.c
+++ b/arch/s390/mm/extmem.c
@@ -192,6 +192,7 @@ query_segment_type (struct dcss_segment *seg)
 	diag_cc = dcss_diag (DCSS_SEGEXT, qin, &dummy, &vmrc);
 
 	if (diag_cc > 1) {
+		PRINT_WARN ("segment_type: diag returned error %ld\n", vmrc);
 		rc = dcss_diag_translate_rc (vmrc);
 		goto out_free;
 	}
@@ -553,7 +554,7 @@ segment_save(char *name)
 	int endpfn = 0;
 	char cmd1[160];
 	char cmd2[80];
-	int i;
+	int i, response;
 
 	if (!MACHINE_IS_VM)
 		return;
@@ -576,8 +577,20 @@ segment_save(char *name)
 			segtype_string[seg->range[i].start & 0xff]);
 	}
 	sprintf(cmd2, "SAVESEG %s", name);
-	cpcmd(cmd1, NULL, 0, NULL);
-	cpcmd(cmd2, NULL, 0, NULL);
+	response = 0;
+	cpcmd(cmd1, NULL, 0, &response);
+	if (response) {
+		PRINT_ERR("segment_save: DEFSEG failed with response code %i\n",
+			  response);
+		goto out;
+	}
+	cpcmd(cmd2, NULL, 0, &response);
+	if (response) {
+		PRINT_ERR("segment_save: SAVESEG failed with response code %i\n",
+			  response);
+		goto out;
+	}
+out:
 	spin_unlock(&dcss_lock);
 }
 
diff --git a/arch/sparc/kernel/ioport.c b/arch/sparc/kernel/ioport.c
index 460f72e640e6..f9ff29734848 100644
--- a/arch/sparc/kernel/ioport.c
+++ b/arch/sparc/kernel/ioport.c
@@ -274,6 +274,11 @@ void *sbus_alloc_consistent(struct sbus_dev *sdev, long len, u32 *dma_addrp)
 	if (mmu_map_dma_area(dma_addrp, va, res->start, len_total) != 0)
 		goto err_noiommu;
 
+	/* Set the resource name, if known. */
+	if (sdev) {
+		res->name = sdev->prom_name;
+	}
+
 	return (void *)res->start;
 
 err_noiommu:
diff --git a/arch/sparc/kernel/module.c b/arch/sparc/kernel/module.c
index 787d5f1347ec..598682f31ebf 100644
--- a/arch/sparc/kernel/module.c
+++ b/arch/sparc/kernel/module.c
@@ -113,6 +113,7 @@ int apply_relocate_add(Elf32_Shdr *sechdrs,
 
 		switch (ELF32_R_TYPE(rel[i].r_info)) {
 		case R_SPARC_32:
+		case R_SPARC_UA32:
 			location[0] = v >> 24;
 			location[1] = v >> 16;
 			location[2] = v >>  8;
diff --git a/arch/sparc/kernel/sparc_ksyms.c b/arch/sparc/kernel/sparc_ksyms.c
index ec1c9687d679..4b376fae752c 100644
--- a/arch/sparc/kernel/sparc_ksyms.c
+++ b/arch/sparc/kernel/sparc_ksyms.c
@@ -251,19 +251,9 @@ EXPORT_SYMBOL(__prom_getchild);
 EXPORT_SYMBOL(__prom_getsibling);
 
 /* sparc library symbols */
-EXPORT_SYMBOL(memchr);
 EXPORT_SYMBOL(memscan);
 EXPORT_SYMBOL(strlen);
-EXPORT_SYMBOL(strnlen);
-EXPORT_SYMBOL(strcpy);
-EXPORT_SYMBOL(strncpy);
-EXPORT_SYMBOL(strcat);
-EXPORT_SYMBOL(strncat);
-EXPORT_SYMBOL(strcmp);
 EXPORT_SYMBOL(strncmp);
-EXPORT_SYMBOL(strchr);
-EXPORT_SYMBOL(strrchr);
-EXPORT_SYMBOL(strstr);
 EXPORT_SYMBOL(page_kernel);
 
 /* Special internal versions of library functions. */
@@ -317,6 +307,3 @@ EXPORT_SYMBOL(do_BUG);
 
 /* Sun Power Management Idle Handler */
 EXPORT_SYMBOL(pm_idle);
-
-/* Binfmt_misc needs this */
-EXPORT_SYMBOL(sys_close);
diff --git a/arch/sparc/kernel/systbls.S b/arch/sparc/kernel/systbls.S
index fbbec5e761c6..2856551bddf1 100644
--- a/arch/sparc/kernel/systbls.S
+++ b/arch/sparc/kernel/systbls.S
@@ -23,7 +23,7 @@ sys_call_table:
 /*10*/  .long sys_unlink, sunos_execv, sys_chdir, sys_chown16, sys_mknod
 /*15*/	.long sys_chmod, sys_lchown16, sparc_brk, sys_nis_syscall, sys_lseek
 /*20*/	.long sys_getpid, sys_capget, sys_capset, sys_setuid16, sys_getuid16
-/*25*/	.long sys_time, sys_ptrace, sys_alarm, sys_sigaltstack, sys_pause
+/*25*/	.long sys_vmsplice, sys_ptrace, sys_alarm, sys_sigaltstack, sys_pause
 /*30*/	.long sys_utime, sys_lchown, sys_fchown, sys_access, sys_nice
 /*35*/	.long sys_chown, sys_sync, sys_kill, sys_newstat, sys_sendfile
 /*40*/	.long sys_newlstat, sys_dup, sys_pipe, sys_times, sys_getuid
@@ -75,10 +75,11 @@ sys_call_table:
 /*265*/	.long sys_timer_delete, sys_timer_create, sys_nis_syscall, sys_io_setup, sys_io_destroy
 /*270*/	.long sys_io_submit, sys_io_cancel, sys_io_getevents, sys_mq_open, sys_mq_unlink
 /*275*/	.long sys_mq_timedsend, sys_mq_timedreceive, sys_mq_notify, sys_mq_getsetattr, sys_waitid
-/*280*/	.long sys_ni_syscall, sys_add_key, sys_request_key, sys_keyctl, sys_openat
+/*280*/	.long sys_tee, sys_add_key, sys_request_key, sys_keyctl, sys_openat
 /*285*/	.long sys_mkdirat, sys_mknodat, sys_fchownat, sys_futimesat, sys_fstatat64
 /*290*/	.long sys_unlinkat, sys_renameat, sys_linkat, sys_symlinkat, sys_readlinkat
 /*295*/	.long sys_fchmodat, sys_faccessat, sys_pselect6, sys_ppoll, sys_unshare
+/*300*/	.long sys_set_robust_list, sys_get_robust_list
 
 #ifdef CONFIG_SUNOS_EMUL
 	/* Now the SunOS syscall table. */
@@ -190,6 +191,6 @@ sunos_sys_table:
 /*290*/	.long sunos_nosys, sunos_nosys, sunos_nosys
 	.long sunos_nosys, sunos_nosys, sunos_nosys
 	.long sunos_nosys, sunos_nosys, sunos_nosys
-	.long sunos_nosys
+	.long sunos_nosys, sunos_nosys, sunos_nosys
 
 #endif
diff --git a/arch/sparc64/Kconfig b/arch/sparc64/Kconfig
index 648047a0bce3..43a66f5407f4 100644
--- a/arch/sparc64/Kconfig
+++ b/arch/sparc64/Kconfig
@@ -187,7 +187,7 @@ config HUGETLB_PAGE_SIZE_512K
 	bool "512K"
 
 config HUGETLB_PAGE_SIZE_64K
-	depends on !SPARC64_PAGE_SIZE_4MB && !SPARC64_PAGE_SIZE_512KB && !SPARC64_PAGE_SIZE_64K
+	depends on !SPARC64_PAGE_SIZE_4MB && !SPARC64_PAGE_SIZE_512KB && !SPARC64_PAGE_SIZE_64KB
 	bool "64K"
 
 endchoice
diff --git a/arch/sparc64/defconfig b/arch/sparc64/defconfig
index 1317380fa937..f09a70b8aabd 100644
--- a/arch/sparc64/defconfig
+++ b/arch/sparc64/defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16
-# Sun Apr  2 19:31:04 2006
+# Linux kernel version: 2.6.17-rc3
+# Fri May 12 12:43:49 2006
 #
 CONFIG_SPARC=y
 CONFIG_SPARC64=y
@@ -114,6 +114,7 @@ CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_HUGETLB_PAGE_SIZE_4MB=y
 # CONFIG_HUGETLB_PAGE_SIZE_512K is not set
 # CONFIG_HUGETLB_PAGE_SIZE_64K is not set
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_ARCH_SPARSEMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_DEFAULT=y
 CONFIG_LARGE_ALLOCS=y
@@ -430,7 +431,6 @@ CONFIG_ISCSI_TCP=m
 # CONFIG_SCSI_INIA100 is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
 # CONFIG_SCSI_QLOGICPTI is not set
 # CONFIG_SCSI_QLA_FC is not set
@@ -1042,9 +1042,7 @@ CONFIG_USB_HIDDEV=y
 # CONFIG_USB_ACECAD is not set
 # CONFIG_USB_KBTAB is not set
 # CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_TOUCHSCREEN is not set
 # CONFIG_USB_YEALINK is not set
 # CONFIG_USB_XPAD is not set
 # CONFIG_USB_ATI_REMOTE is not set
@@ -1115,6 +1113,14 @@ CONFIG_USB_HIDDEV=y
 # CONFIG_NEW_LEDS is not set
 
 #
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
 # InfiniBand support
 #
 # CONFIG_INFINIBAND is not set
@@ -1303,6 +1309,7 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_DEBUG_VM is not set
+# CONFIG_UNWIND_INFO is not set
 CONFIG_FORCED_INLINING=y
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
diff --git a/arch/sparc64/kernel/head.S b/arch/sparc64/kernel/head.S
index 3eadac5e171e..31c5892f5acc 100644
--- a/arch/sparc64/kernel/head.S
+++ b/arch/sparc64/kernel/head.S
@@ -10,6 +10,7 @@
 #include <linux/config.h>
 #include <linux/version.h>
 #include <linux/errno.h>
+#include <linux/threads.h>
 #include <asm/thread_info.h>
 #include <asm/asi.h>
 #include <asm/pstate.h>
@@ -493,6 +494,35 @@ tlb_fixup_done:
 	call	prom_init
 	 mov	%l7, %o0			! OpenPROM cif handler
 
+	/* Initialize current_thread_info()->cpu as early as possible.
+	 * In order to do that accurately we have to patch up the get_cpuid()
+	 * assembler sequences.  And that, in turn, requires that we know
+	 * if we are on a Starfire box or not.  While we're here, patch up
+	 * the sun4v sequences as well.
+	 */
+	call	check_if_starfire
+	 nop
+	call	per_cpu_patch
+	 nop
+	call	sun4v_patch
+	 nop
+
+#ifdef CONFIG_SMP
+	call	hard_smp_processor_id
+	 nop
+	cmp	%o0, NR_CPUS
+	blu,pt	%xcc, 1f
+	 nop
+	call	boot_cpu_id_too_large
+	 nop
+	/* Not reached... */
+
+1:
+#else
+	mov	0, %o0
+#endif
+	stb	%o0, [%g6 + TI_CPU]
+
 	/* Off we go.... */
 	call	start_kernel
 	 nop
diff --git a/arch/sparc64/kernel/kprobes.c b/arch/sparc64/kernel/kprobes.c
index ffc7309e9f22..2e1c824c1cc9 100644
--- a/arch/sparc64/kernel/kprobes.c
+++ b/arch/sparc64/kernel/kprobes.c
@@ -63,7 +63,7 @@ void __kprobes arch_disarm_kprobe(struct kprobe *p)
 	flushi(p->addr);
 }
 
-static inline void save_previous_kprobe(struct kprobe_ctlblk *kcb)
+static void __kprobes save_previous_kprobe(struct kprobe_ctlblk *kcb)
 {
 	kcb->prev_kprobe.kp = kprobe_running();
 	kcb->prev_kprobe.status = kcb->kprobe_status;
@@ -71,7 +71,7 @@ static inline void save_previous_kprobe(struct kprobe_ctlblk *kcb)
 	kcb->prev_kprobe.orig_tstate_pil = kcb->kprobe_orig_tstate_pil;
 }
 
-static inline void restore_previous_kprobe(struct kprobe_ctlblk *kcb)
+static void __kprobes restore_previous_kprobe(struct kprobe_ctlblk *kcb)
 {
 	__get_cpu_var(current_kprobe) = kcb->prev_kprobe.kp;
 	kcb->kprobe_status = kcb->prev_kprobe.status;
@@ -79,7 +79,7 @@ static inline void restore_previous_kprobe(struct kprobe_ctlblk *kcb)
 	kcb->kprobe_orig_tstate_pil = kcb->prev_kprobe.orig_tstate_pil;
 }
 
-static inline void set_current_kprobe(struct kprobe *p, struct pt_regs *regs,
+static void __kprobes set_current_kprobe(struct kprobe *p, struct pt_regs *regs,
 				struct kprobe_ctlblk *kcb)
 {
 	__get_cpu_var(current_kprobe) = p;
@@ -87,7 +87,7 @@ static inline void set_current_kprobe(struct kprobe *p, struct pt_regs *regs,
 	kcb->kprobe_orig_tstate_pil = (regs->tstate & TSTATE_PIL);
 }
 
-static inline void prepare_singlestep(struct kprobe *p, struct pt_regs *regs,
+static void __kprobes prepare_singlestep(struct kprobe *p, struct pt_regs *regs,
 			struct kprobe_ctlblk *kcb)
 {
 	regs->tstate |= TSTATE_PIL;
@@ -273,7 +273,7 @@ static void __kprobes resume_execution(struct kprobe *p,
 			kcb->kprobe_orig_tstate_pil);
 }
 
-static inline int post_kprobe_handler(struct pt_regs *regs)
+static int __kprobes post_kprobe_handler(struct pt_regs *regs)
 {
 	struct kprobe *cur = kprobe_running();
 	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
@@ -300,7 +300,7 @@ out:
 	return 1;
 }
 
-static inline int kprobe_fault_handler(struct pt_regs *regs, int trapnr)
+static int __kprobes kprobe_fault_handler(struct pt_regs *regs, int trapnr)
 {
 	struct kprobe *cur = kprobe_running();
 	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
diff --git a/arch/sparc64/kernel/module.c b/arch/sparc64/kernel/module.c
index 6c83e372f75d..579871527699 100644
--- a/arch/sparc64/kernel/module.c
+++ b/arch/sparc64/kernel/module.c
@@ -143,6 +143,11 @@ int apply_relocate_add(Elf64_Shdr *sechdrs,
 			location[3] = v >>  0;
 			break;
 
+		case R_SPARC_DISP32:
+			v -= (Elf64_Addr) location;
+			*loc32 = v;
+			break;
+
 		case R_SPARC_WDISP30:
 			v -= (Elf64_Addr) location;
 			*loc32 = (*loc32 & ~0x3fffffff) |
diff --git a/arch/sparc64/kernel/pci.c b/arch/sparc64/kernel/pci.c
index dfccff29e182..f97ddeb105ac 100644
--- a/arch/sparc64/kernel/pci.c
+++ b/arch/sparc64/kernel/pci.c
@@ -419,6 +419,7 @@ void pcibios_resource_to_bus(struct pci_dev *pdev, struct pci_bus_region *region
 	region->start = res->start - zero_res.start;
 	region->end = res->end - zero_res.start;
 }
+EXPORT_SYMBOL(pcibios_resource_to_bus);
 
 void pcibios_bus_to_resource(struct pci_dev *pdev, struct resource *res,
 			     struct pci_bus_region *region)
diff --git a/arch/sparc64/kernel/pci_iommu.c b/arch/sparc64/kernel/pci_iommu.c
index 8efbc139769d..82e5455134c6 100644
--- a/arch/sparc64/kernel/pci_iommu.c
+++ b/arch/sparc64/kernel/pci_iommu.c
@@ -218,7 +218,7 @@ static inline void iommu_free_ctx(struct pci_iommu *iommu, int ctx)
  * DMA for PCI device PDEV.  Return non-NULL cpu-side address if
  * successful and set *DMA_ADDRP to the PCI side dma address.
  */
-static void *pci_4u_alloc_consistent(struct pci_dev *pdev, size_t size, dma_addr_t *dma_addrp)
+static void *pci_4u_alloc_consistent(struct pci_dev *pdev, size_t size, dma_addr_t *dma_addrp, gfp_t gfp)
 {
 	struct pcidev_cookie *pcp;
 	struct pci_iommu *iommu;
@@ -232,7 +232,7 @@ static void *pci_4u_alloc_consistent(struct pci_dev *pdev, size_t size, dma_addr
 	if (order >= 10)
 		return NULL;
 
-	first_page = __get_free_pages(GFP_ATOMIC, order);
+	first_page = __get_free_pages(gfp, order);
 	if (first_page == 0UL)
 		return NULL;
 	memset((char *)first_page, 0, PAGE_SIZE << order);
diff --git a/arch/sparc64/kernel/pci_sun4v.c b/arch/sparc64/kernel/pci_sun4v.c
index 9e94db2573a2..2b7a1f316a93 100644
--- a/arch/sparc64/kernel/pci_sun4v.c
+++ b/arch/sparc64/kernel/pci_sun4v.c
@@ -154,7 +154,7 @@ static void pci_arena_free(struct pci_iommu_arena *arena, unsigned long base, un
 		__clear_bit(i, arena->map);
 }
 
-static void *pci_4v_alloc_consistent(struct pci_dev *pdev, size_t size, dma_addr_t *dma_addrp)
+static void *pci_4v_alloc_consistent(struct pci_dev *pdev, size_t size, dma_addr_t *dma_addrp, gfp_t gfp)
 {
 	struct pcidev_cookie *pcp;
 	struct pci_iommu *iommu;
@@ -169,7 +169,7 @@ static void *pci_4v_alloc_consistent(struct pci_dev *pdev, size_t size, dma_addr
 
 	npages = size >> IO_PAGE_SHIFT;
 
-	first_page = __get_free_pages(GFP_ATOMIC, order);
+	first_page = __get_free_pages(gfp, order);
 	if (unlikely(first_page == 0UL))
 		return NULL;
 
diff --git a/arch/sparc64/kernel/ptrace.c b/arch/sparc64/kernel/ptrace.c
index 49e6dedd027d..d31975e6d6f6 100644
--- a/arch/sparc64/kernel/ptrace.c
+++ b/arch/sparc64/kernel/ptrace.c
@@ -653,7 +653,7 @@ asmlinkage void syscall_trace(struct pt_regs *regs, int syscall_exit_p)
 		if (unlikely(tstate & (TSTATE_XCARRY | TSTATE_ICARRY)))
 			result = AUDITSC_FAILURE;
 
-		audit_syscall_exit(current, result, regs->u_regs[UREG_I0]);
+		audit_syscall_exit(result, regs->u_regs[UREG_I0]);
 	}
 
 	if (!(current->ptrace & PT_PTRACED))
@@ -677,8 +677,7 @@ asmlinkage void syscall_trace(struct pt_regs *regs, int syscall_exit_p)
 
 out:
 	if (unlikely(current->audit_context) && !syscall_exit_p)
-		audit_syscall_entry(current,
-				    (test_thread_flag(TIF_32BIT) ?
+		audit_syscall_entry((test_thread_flag(TIF_32BIT) ?
 				     AUDIT_ARCH_SPARC :
 				     AUDIT_ARCH_SPARC64),
 				    regs->u_regs[UREG_G1],
diff --git a/arch/sparc64/kernel/setup.c b/arch/sparc64/kernel/setup.c
index 005167f82419..9cf1c88cd774 100644
--- a/arch/sparc64/kernel/setup.c
+++ b/arch/sparc64/kernel/setup.c
@@ -220,7 +220,7 @@ char reboot_command[COMMAND_LINE_SIZE];
 
 static struct pt_regs fake_swapper_regs = { { 0, }, 0, 0, 0, 0 };
 
-static void __init per_cpu_patch(void)
+void __init per_cpu_patch(void)
 {
 	struct cpuid_patch_entry *p;
 	unsigned long ver;
@@ -280,7 +280,7 @@ static void __init per_cpu_patch(void)
 	}
 }
 
-static void __init sun4v_patch(void)
+void __init sun4v_patch(void)
 {
 	struct sun4v_1insn_patch_entry *p1;
 	struct sun4v_2insn_patch_entry *p2;
@@ -315,6 +315,15 @@ static void __init sun4v_patch(void)
 	}
 }
 
+#ifdef CONFIG_SMP
+void __init boot_cpu_id_too_large(int cpu)
+{
+	prom_printf("Serious problem, boot cpu id (%d) >= NR_CPUS (%d)\n",
+		    cpu, NR_CPUS);
+	prom_halt();
+}
+#endif
+
 void __init setup_arch(char **cmdline_p)
 {
 	/* Initialize PROM console and command line. */
@@ -332,16 +341,6 @@ void __init setup_arch(char **cmdline_p)
 	conswitchp = &prom_con;
 #endif
 
-	/* Work out if we are starfire early on */
-	check_if_starfire();
-
-	/* Now we know enough to patch the get_cpuid sequences
-	 * used by trap code.
-	 */
-	per_cpu_patch();
-
-	sun4v_patch();
-
 	boot_flags_init(*cmdline_p);
 
 	idprom_init();
diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c
index 90eaca3ec9a6..4e8cd79156e0 100644
--- a/arch/sparc64/kernel/smp.c
+++ b/arch/sparc64/kernel/smp.c
@@ -1264,7 +1264,6 @@ void __init smp_tick_init(void)
 	boot_cpu_id = hard_smp_processor_id();
 	current_tick_offset = timer_tick_offset;
 
-	cpu_set(boot_cpu_id, cpu_online_map);
 	prof_counter(boot_cpu_id) = prof_multiplier(boot_cpu_id) = 1;
 }
 
@@ -1345,18 +1344,6 @@ void __init smp_setup_cpu_possible_map(void)
 
 void __devinit smp_prepare_boot_cpu(void)
 {
-	int cpu = hard_smp_processor_id();
-
-	if (cpu >= NR_CPUS) {
-		prom_printf("Serious problem, boot cpu id >= NR_CPUS\n");
-		prom_halt();
-	}
-
-	current_thread_info()->cpu = cpu;
-	__local_per_cpu_offset = __per_cpu_offset(cpu);
-
-	cpu_set(smp_processor_id(), cpu_online_map);
-	cpu_set(smp_processor_id(), phys_cpu_present_map);
 }
 
 int __devinit __cpu_up(unsigned int cpu)
@@ -1433,4 +1420,7 @@ void __init setup_per_cpu_areas(void)
 
 	for (i = 0; i < NR_CPUS; i++, ptr += size)
 		memcpy(ptr, __per_cpu_start, __per_cpu_end - __per_cpu_start);
+
+	/* Setup %g5 for the boot cpu.  */
+	__local_per_cpu_offset = __per_cpu_offset(smp_processor_id());
 }
diff --git a/arch/sparc64/kernel/sys32.S b/arch/sparc64/kernel/sys32.S
index 86dd5cb81e09..bdf1f4d02e3f 100644
--- a/arch/sparc64/kernel/sys32.S
+++ b/arch/sparc64/kernel/sys32.S
@@ -138,6 +138,8 @@ SIGN2(sys32_ioprio_get, sys_ioprio_get, %o0, %o1)
 SIGN3(sys32_ioprio_set, sys_ioprio_set, %o0, %o1, %o2)
 SIGN2(sys32_splice, sys_splice, %o0, %o1)
 SIGN2(sys32_sync_file_range, compat_sync_file_range, %o0, %o5)
+SIGN2(sys32_tee, sys_tee, %o0, %o1)
+SIGN1(sys32_vmsplice, compat_sys_vmsplice, %o0)
 
 	.globl		sys32_mmap2
 sys32_mmap2:
diff --git a/arch/sparc64/kernel/systbls.S b/arch/sparc64/kernel/systbls.S
index 857b82c82875..1136fc465e37 100644
--- a/arch/sparc64/kernel/systbls.S
+++ b/arch/sparc64/kernel/systbls.S
@@ -25,7 +25,7 @@ sys_call_table32:
 /*10*/  .word sys_unlink, sunos_execv, sys_chdir, sys32_chown16, sys32_mknod
 /*15*/	.word sys_chmod, sys32_lchown16, sparc_brk, sys32_perfctr, sys32_lseek
 /*20*/	.word sys_getpid, sys_capget, sys_capset, sys32_setuid16, sys32_getuid16
-/*25*/	.word compat_sys_time, sys_ptrace, sys_alarm, sys32_sigaltstack, sys32_pause
+/*25*/	.word sys32_vmsplice, sys_ptrace, sys_alarm, sys32_sigaltstack, sys32_pause
 /*30*/	.word compat_sys_utime, sys_lchown, sys_fchown, sys32_access, sys32_nice
 	.word sys_chown, sys_sync, sys32_kill, compat_sys_newstat, sys32_sendfile
 /*40*/	.word compat_sys_newlstat, sys_dup, sys_pipe, compat_sys_times, sys_getuid
@@ -76,10 +76,11 @@ sys_call_table32:
 	.word sys_timer_delete, compat_sys_timer_create, sys_ni_syscall, compat_sys_io_setup, sys_io_destroy
 /*270*/	.word sys32_io_submit, sys_io_cancel, compat_sys_io_getevents, sys32_mq_open, sys_mq_unlink
 	.word compat_sys_mq_timedsend, compat_sys_mq_timedreceive, compat_sys_mq_notify, compat_sys_mq_getsetattr, compat_sys_waitid
-/*280*/	.word sys_ni_syscall, sys_add_key, sys_request_key, sys_keyctl, compat_sys_openat
+/*280*/	.word sys32_tee, sys_add_key, sys_request_key, sys_keyctl, compat_sys_openat
 	.word sys_mkdirat, sys_mknodat, sys_fchownat, compat_sys_futimesat, compat_sys_fstatat64
-/*285*/	.word sys_unlinkat, sys_renameat, sys_linkat, sys_symlinkat, sys_readlinkat
+/*290*/	.word sys_unlinkat, sys_renameat, sys_linkat, sys_symlinkat, sys_readlinkat
 	.word sys_fchmodat, sys_faccessat, compat_sys_pselect6, compat_sys_ppoll, sys_unshare
+/*300*/	.word compat_sys_set_robust_list, compat_sys_get_robust_list
 
 #endif /* CONFIG_COMPAT */
 
@@ -94,7 +95,7 @@ sys_call_table:
 /*10*/  .word sys_unlink, sys_nis_syscall, sys_chdir, sys_chown, sys_mknod
 /*15*/	.word sys_chmod, sys_lchown, sparc_brk, sys_perfctr, sys_lseek
 /*20*/	.word sys_getpid, sys_capget, sys_capset, sys_setuid, sys_getuid
-/*25*/	.word sys_nis_syscall, sys_ptrace, sys_alarm, sys_sigaltstack, sys_nis_syscall
+/*25*/	.word sys_vmsplice, sys_ptrace, sys_alarm, sys_sigaltstack, sys_nis_syscall
 /*30*/	.word sys_utime, sys_nis_syscall, sys_nis_syscall, sys_access, sys_nice
 	.word sys_nis_syscall, sys_sync, sys_kill, sys_newstat, sys_sendfile64
 /*40*/	.word sys_newlstat, sys_dup, sys_pipe, sys_times, sys_nis_syscall
@@ -145,10 +146,11 @@ sys_call_table:
 	.word sys_timer_delete, sys_timer_create, sys_ni_syscall, sys_io_setup, sys_io_destroy
 /*270*/	.word sys_io_submit, sys_io_cancel, sys_io_getevents, sys_mq_open, sys_mq_unlink
 	.word sys_mq_timedsend, sys_mq_timedreceive, sys_mq_notify, sys_mq_getsetattr, sys_waitid
-/*280*/	.word sys_nis_syscall, sys_add_key, sys_request_key, sys_keyctl, sys_openat
+/*280*/	.word sys_tee, sys_add_key, sys_request_key, sys_keyctl, sys_openat
 	.word sys_mkdirat, sys_mknodat, sys_fchownat, sys_futimesat, sys_fstatat64
-/*285*/	.word sys_unlinkat, sys_renameat, sys_linkat, sys_symlinkat, sys_readlinkat
+/*290*/	.word sys_unlinkat, sys_renameat, sys_linkat, sys_symlinkat, sys_readlinkat
 	.word sys_fchmodat, sys_faccessat, sys_pselect6, sys_ppoll, sys_unshare
+/*300*/	.word sys_set_robust_list, sys_get_robust_list
 
 #if defined(CONFIG_SUNOS_EMUL) || defined(CONFIG_SOLARIS_EMUL) || \
     defined(CONFIG_SOLARIS_EMUL_MODULE)
@@ -261,5 +263,5 @@ sunos_sys_table:
 /*290*/	.word sunos_nosys, sunos_nosys, sunos_nosys
 	.word sunos_nosys, sunos_nosys, sunos_nosys
 	.word sunos_nosys, sunos_nosys, sunos_nosys
-	.word sunos_nosys
+	.word sunos_nosys, sunos_nosys, sunos_nosys
 #endif
diff --git a/arch/sparc64/lib/checksum.S b/arch/sparc64/lib/checksum.S
index ba9cd3ccc2b2..1d230f693dc4 100644
--- a/arch/sparc64/lib/checksum.S
+++ b/arch/sparc64/lib/checksum.S
@@ -165,8 +165,9 @@ csum_partial_end_cruft:
 	sll		%g1, 8, %g1
 	or		%o5, %g1, %o4
 
-1:	add		%o2, %o4, %o2
+1:	addcc		%o2, %o4, %o2
+	addc		%g0, %o2, %o2
 
 csum_partial_finish:
 	retl
-	 mov		%o2, %o0
+	 srl		%o2, 0, %o0
diff --git a/arch/sparc64/lib/csum_copy.S b/arch/sparc64/lib/csum_copy.S
index 71af48839064..e566c770a0f6 100644
--- a/arch/sparc64/lib/csum_copy.S
+++ b/arch/sparc64/lib/csum_copy.S
@@ -221,11 +221,12 @@ FUNC_NAME:		/* %o0=src, %o1=dst, %o2=len, %o3=sum */
 	sll		%g1, 8, %g1
 	or		%o5, %g1, %o4
 
-1:	add		%o3, %o4, %o3
+1:	addcc		%o3, %o4, %o3
+	addc		%g0, %o3, %o3
 
 70:
 	retl
-	 mov		%o3, %o0
+	 srl		%o3, 0, %o0
 
 95:	mov		0, GLOBAL_SPARE
 	brlez,pn	%o2, 4f
diff --git a/arch/sparc64/mm/tlb.c b/arch/sparc64/mm/tlb.c
index a079cf42505e..3f10fc921b00 100644
--- a/arch/sparc64/mm/tlb.c
+++ b/arch/sparc64/mm/tlb.c
@@ -8,6 +8,7 @@
 #include <linux/percpu.h>
 #include <linux/mm.h>
 #include <linux/swap.h>
+#include <linux/preempt.h>
 
 #include <asm/pgtable.h>
 #include <asm/pgalloc.h>
@@ -24,6 +25,8 @@ void flush_tlb_pending(void)
 {
 	struct mmu_gather *mp = &__get_cpu_var(mmu_gathers);
 
+	preempt_disable();
+
 	if (mp->tlb_nr) {
 		flush_tsb_user(mp);
 
@@ -38,6 +41,8 @@ void flush_tlb_pending(void)
 		}
 		mp->tlb_nr = 0;
 	}
+
+	preempt_enable();
 }
 
 void tlb_batch_add(struct mm_struct *mm, unsigned long vaddr, pte_t *ptep, pte_t orig)
diff --git a/arch/um/Kconfig b/arch/um/Kconfig
index 05fbb20636cb..76e85bbaea55 100644
--- a/arch/um/Kconfig
+++ b/arch/um/Kconfig
@@ -57,20 +57,6 @@ config STATIC_LINK
 	chroot, and you disable CONFIG_MODE_TT, you probably want to say Y
 	here.
 
-config HOST_2G_2G
-	bool "2G/2G host address space split"
-	default n
-	depends on MODE_TT
-	help
-	This is needed when the host on which you run has a 2G/2G memory
-	split, instead of the customary 3G/1G.
-
-	Note that to enable such a host
-	configuration, which makes sense only in some cases, you need special
-	host patches.
-
-	So, if you do not know what to do here, say 'N'.
-
 config KERNEL_HALF_GIGS
 	int "Kernel address space size (in .5G units)"
 	default "1"
diff --git a/arch/um/Kconfig.i386 b/arch/um/Kconfig.i386
index 85e6a55b3b59..f6eb72d117b9 100644
--- a/arch/um/Kconfig.i386
+++ b/arch/um/Kconfig.i386
@@ -16,6 +16,19 @@ config SEMAPHORE_SLEEPERS
 	bool
 	default y
 
+config HOST_2G_2G
+	bool "2G/2G host address space split"
+	default n
+	help
+	This is needed when the host on which you run has a 2G/2G memory
+	split, instead of the customary 3G/1G.
+
+	Note that to enable such a host
+	configuration, which makes sense only in some cases, you need special
+	host patches.
+
+	So, if you do not know what to do here, say 'N'.
+
 config TOP_ADDR
  	hex
  	default 0xc0000000 if !HOST_2G_2G
@@ -35,11 +48,13 @@ config 3_LEVEL_PGTABLES
 
 config STUB_CODE
 	hex
-	default 0xbfffe000
+	default 0xbfffe000 if !HOST_2G_2G
+	default 0x7fffe000 if HOST_2G_2G
 
 config STUB_DATA
 	hex
-	default 0xbffff000
+	default 0xbffff000 if !HOST_2G_2G
+	default 0x7ffff000 if HOST_2G_2G
 
 config STUB_START
 	hex
diff --git a/arch/um/Makefile b/arch/um/Makefile
index a508e7a02891..f6ad832faf13 100644
--- a/arch/um/Makefile
+++ b/arch/um/Makefile
@@ -96,7 +96,8 @@ PHONY += linux
 all: linux
 
 linux: vmlinux
-	ln -f $< $@
+	@echo '  LINK $@'
+	$(Q)ln -f $< $@
 
 define archhelp
   echo '* linux		- Binary kernel image (./linux) - for backward'
@@ -117,6 +118,10 @@ prepare: $(ARCH_DIR)/include/kern_constants.h
 LINK-$(CONFIG_LD_SCRIPT_STATIC) += -static
 LINK-$(CONFIG_LD_SCRIPT_DYN) += -Wl,-rpath,/lib
 
+CFLAGS_NO_HARDENING := $(call cc-option, -fno-PIC,) $(call cc-option, -fno-pic,) \
+	$(call cc-option, -fno-stack-protector,) \
+	$(call cc-option, -fno-stack-protector-all,)
+
 CPP_MODE-$(CONFIG_MODE_TT) := -DMODE_TT
 CONFIG_KERNEL_STACK_ORDER ?= 2
 STACK_SIZE := $(shell echo $$[ 4096 * (1 << $(CONFIG_KERNEL_STACK_ORDER)) ] )
@@ -203,8 +208,8 @@ endef
 $(ARCH_DIR)/include/uml-config.h : include/linux/autoconf.h
 	$(call filechk,umlconfig)
 
-$(ARCH_DIR)/user-offsets.s: $(ARCH_DIR)/sys-$(SUBARCH)/user-offsets.c
-	$(CC) $(USER_CFLAGS) -S -o $@ $<
+$(ARCH_DIR)/sys-$(SUBARCH)/user-offsets.s: FORCE
+	$(Q)$(MAKE) $(build)=$(ARCH_DIR)/sys-$(SUBARCH) $@
 
 define filechk_gen-asm-offsets
         (set -e; \
@@ -219,13 +224,11 @@ define filechk_gen-asm-offsets
          echo ""; )
 endef
 
-$(ARCH_DIR)/include/user_constants.h: $(ARCH_DIR)/user-offsets.s
+$(ARCH_DIR)/include/user_constants.h: $(ARCH_DIR)/sys-$(SUBARCH)/user-offsets.s
 	$(call filechk,gen-asm-offsets)
 
-CLEAN_FILES += $(ARCH_DIR)/user-offsets.s
-
 $(ARCH_DIR)/include/kern_constants.h: $(objtree)/$(ARCH_DIR)/include
 	@echo '  SYMLINK $@'
-	$(Q) ln -sf ../../../include/asm-um/asm-offsets.h $@
+	$(Q)ln -sf ../../../include/asm-um/asm-offsets.h $@
 
-export SUBARCH USER_CFLAGS OS
+export SUBARCH USER_CFLAGS CFLAGS_NO_HARDENING OS
diff --git a/arch/um/Makefile-i386 b/arch/um/Makefile-i386
index 7a0e04e34bf9..b65ca115ef77 100644
--- a/arch/um/Makefile-i386
+++ b/arch/um/Makefile-i386
@@ -33,5 +33,9 @@ include $(srctree)/arch/i386/Makefile.cpu
 # prevent gcc from keeping the stack 16 byte aligned. Taken from i386.
 cflags-y += $(call cc-option,-mpreferred-stack-boundary=2)
 
+# Prevent sprintf in nfsd from being converted to strcpy and resulting in
+# an unresolved reference.
+cflags-y += -ffreestanding
+
 CFLAGS += $(cflags-y)
 USER_CFLAGS += $(cflags-y)
diff --git a/arch/um/defconfig b/arch/um/defconfig
index 80d30d19d750..402a74dc5026 100644
--- a/arch/um/defconfig
+++ b/arch/um/defconfig
@@ -1,14 +1,13 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc6-mm1
-# Tue Jun 14 18:22:21 2005
+# Linux kernel version: 2.6.17-rc3
+# Fri Apr 28 09:31:20 2006
 #
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_UML=y
 CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_IRQ_RELEASE_METHOD=y
 
 #
 # UML-specific options
@@ -16,8 +15,50 @@ CONFIG_GENERIC_CALIBRATE_DELAY=y
 # CONFIG_MODE_TT is not set
 # CONFIG_STATIC_LINK is not set
 CONFIG_MODE_SKAS=y
+
+#
+# Host processor type and features
+#
+# CONFIG_M386 is not set
+# CONFIG_M486 is not set
+# CONFIG_M586 is not set
+# CONFIG_M586TSC is not set
+# CONFIG_M586MMX is not set
+CONFIG_M686=y
+# CONFIG_MPENTIUMII is not set
+# CONFIG_MPENTIUMIII is not set
+# CONFIG_MPENTIUMM is not set
+# CONFIG_MPENTIUM4 is not set
+# CONFIG_MK6 is not set
+# CONFIG_MK7 is not set
+# CONFIG_MK8 is not set
+# CONFIG_MCRUSOE is not set
+# CONFIG_MEFFICEON is not set
+# CONFIG_MWINCHIPC6 is not set
+# CONFIG_MWINCHIP2 is not set
+# CONFIG_MWINCHIP3D is not set
+# CONFIG_MGEODEGX1 is not set
+# CONFIG_MGEODE_LX is not set
+# CONFIG_MCYRIXIII is not set
+# CONFIG_MVIAC3_2 is not set
+# CONFIG_X86_GENERIC is not set
+CONFIG_X86_CMPXCHG=y
+CONFIG_X86_XADD=y
+CONFIG_X86_L1_CACHE_SHIFT=5
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_X86_PPRO_FENCE=y
+CONFIG_X86_WP_WORKS_OK=y
+CONFIG_X86_INVLPG=y
+CONFIG_X86_BSWAP=y
+CONFIG_X86_POPAD_OK=y
+CONFIG_X86_CMPXCHG64=y
+CONFIG_X86_GOOD_APIC=y
+CONFIG_X86_USE_PPRO_CHECKSUM=y
+CONFIG_X86_TSC=y
 CONFIG_UML_X86=y
 # CONFIG_64BIT is not set
+CONFIG_SEMAPHORE_SLEEPERS=y
+# CONFIG_HOST_2G_2G is not set
 CONFIG_TOP_ADDR=0xc0000000
 # CONFIG_3_LEVEL_PGTABLES is not set
 CONFIG_STUB_CODE=0xbfffe000
@@ -25,22 +66,24 @@ CONFIG_STUB_DATA=0xbffff000
 CONFIG_STUB_START=0xbfffe000
 CONFIG_ARCH_HAS_SC_SIGNALS=y
 CONFIG_ARCH_REUSE_HOST_VSYSCALL_AREA=y
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_LD_SCRIPT_DYN=y
 CONFIG_NET=y
 CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=m
 # CONFIG_HOSTFS is not set
+# CONFIG_HPPFS is not set
 CONFIG_MCONSOLE=y
 # CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_HOST_2G_2G is not set
 CONFIG_NEST_LEVEL=0
-CONFIG_KERNEL_HALF_GIGS=1
 # CONFIG_HIGHMEM is not set
 CONFIG_KERNEL_STACK_ORDER=2
 CONFIG_UML_REAL_TIME_CLOCK=y
@@ -49,7 +92,6 @@ CONFIG_UML_REAL_TIME_CLOCK=y
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 
@@ -57,6 +99,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32
 # General setup
 #
 CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
@@ -64,26 +107,28 @@ CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_UID16=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
 
 #
 # Loadable module support
@@ -91,18 +136,43 @@ CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
 
 #
-# Generic Driver Options
+# Block layer
 #
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# Block devices
+#
+CONFIG_BLK_DEV_UBD=y
+# CONFIG_BLK_DEV_UBD_SYNC is not set
+CONFIG_BLK_DEV_COW_COMMON=y
+# CONFIG_MMAPPER is not set
+CONFIG_BLK_DEV_LOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_ATA_OVER_ETH is not set
 
 #
 # Character Devices
@@ -127,50 +197,23 @@ CONFIG_UML_SOUND=m
 CONFIG_SOUND=m
 CONFIG_HOSTAUDIO=m
 CONFIG_UML_RANDOM=y
-# CONFIG_MMAPPER is not set
-
-#
-# Block devices
-#
-CONFIG_BLK_DEV_UBD=y
-CONFIG_BLK_DEV_UBD_SYNC=y
-CONFIG_BLK_DEV_COW_COMMON=y
-CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_LBD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-CONFIG_NETDEVICES=y
 
 #
-# UML Network Devices
+# Generic Driver Options
 #
-CONFIG_UML_NET=y
-CONFIG_UML_NET_ETHERTAP=y
-CONFIG_UML_NET_TUNTAP=y
-CONFIG_UML_NET_SLIP=y
-CONFIG_UML_NET_DAEMON=y
-CONFIG_UML_NET_MCAST=y
-CONFIG_UML_NET_SLIRP=y
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
 
 #
-# Networking support
+# Networking
 #
 
 #
 # Networking options
 #
+# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -178,6 +221,7 @@ CONFIG_UNIX=y
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
 # CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
 # CONFIG_IP_PNP is not set
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
@@ -186,27 +230,31 @@ CONFIG_INET=y
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-
-#
-# TCP congestion control
-#
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_BIC=y
-CONFIG_TCP_CONG_WESTWOOD=y
-CONFIG_TCP_CONG_HTCP=y
-# CONFIG_TCP_CONG_HSTCP is not set
-# CONFIG_TCP_CONG_HYBLA is not set
-# CONFIG_TCP_CONG_VEGAS is not set
-# CONFIG_TCP_CONG_SCALABLE is not set
 # CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETFILTER is not set
 
 #
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
@@ -224,27 +272,47 @@ CONFIG_TCP_CONG_HTCP=y
 # QoS and/or fair queueing
 #
 # CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
 
 #
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
-# CONFIG_KGDBOE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_IEEE80211 is not set
+
+#
+# UML Network Devices
+#
+CONFIG_UML_NET=y
+CONFIG_UML_NET_ETHERTAP=y
+CONFIG_UML_NET_TUNTAP=y
+CONFIG_UML_NET_SLIP=y
+CONFIG_UML_NET_DAEMON=y
+CONFIG_UML_NET_MCAST=y
+# CONFIG_UML_NET_PCAP is not set
+CONFIG_UML_NET_SLIRP=y
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
 CONFIG_TUN=m
 
 #
+# PHY device support
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
 # Wan interfaces
 #
 # CONFIG_WAN is not set
@@ -263,6 +331,13 @@ CONFIG_SLIP=m
 # CONFIG_SLIP_MODE_SLIP6 is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
 
 #
 # File systems
@@ -274,17 +349,14 @@ CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
-# CONFIG_REISER4_FS is not set
 CONFIG_REISERFS_FS=y
 # CONFIG_REISERFS_CHECK is not set
 # CONFIG_REISERFS_PROC_INFO is not set
 # CONFIG_REISERFS_FS_XATTR is not set
 # CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
+# CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
@@ -295,11 +367,6 @@ CONFIG_QUOTACTL=y
 CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
-
-#
-# Caches
-#
-# CONFIG_FSCACHE is not set
 # CONFIG_FUSE_FS is not set
 
 #
@@ -323,14 +390,10 @@ CONFIG_JOLIET=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
-# CONFIG_RELAYFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -430,6 +493,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # Library routines
 #
 # CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
 CONFIG_CRC32=m
 # CONFIG_LIBCRC32C is not set
 
@@ -448,12 +512,18 @@ CONFIG_LOG_BUF_SHIFT=14
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 CONFIG_DEBUG_SLAB=y
+# CONFIG_DEBUG_SLAB_LEAK is not set
+# CONFIG_DEBUG_MUTEXES is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
 CONFIG_FRAME_POINTER=y
+# CONFIG_UNWIND_INFO is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_GPROF is not set
 # CONFIG_GCOV is not set
 # CONFIG_SYSCALL_DEBUG is not set
diff --git a/arch/um/include/kern_util.h b/arch/um/include/kern_util.h
index efa3d33c0be6..310980b32173 100644
--- a/arch/um/include/kern_util.h
+++ b/arch/um/include/kern_util.h
@@ -120,20 +120,11 @@ extern int is_syscall(unsigned long addr);
 extern void free_irq(unsigned int, void *);
 extern int cpu(void);
 
+extern void time_init_kern(void);
+
 /* Are we disallowed to sleep? Used to choose between GFP_KERNEL and GFP_ATOMIC. */
 extern int __cant_sleep(void);
 extern void segv_handler(int sig, union uml_pt_regs *regs);
 extern void sigio_handler(int sig, union uml_pt_regs *regs);
 
 #endif
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only.  This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
diff --git a/arch/um/include/longjmp.h b/arch/um/include/longjmp.h
index 018b3819ab0b..8e7053013f7b 100644
--- a/arch/um/include/longjmp.h
+++ b/arch/um/include/longjmp.h
@@ -4,11 +4,11 @@
 #include <setjmp.h>
 #include "os.h"
 
-#define UML_SIGLONGJMP(buf, val) do { \
+#define UML_LONGJMP(buf, val) do { \
 	longjmp(*buf, val);	\
 } while(0)
 
-#define UML_SIGSETJMP(buf, enable) ({ \
+#define UML_SETJMP(buf, enable) ({ \
 	int n; \
 	enable = get_signals(); \
 	n = setjmp(*buf); \
diff --git a/arch/um/include/sysdep-i386/kernel-offsets.h b/arch/um/include/sysdep-i386/kernel-offsets.h
index 82f96c574144..2c13de321f2f 100644
--- a/arch/um/include/sysdep-i386/kernel-offsets.h
+++ b/arch/um/include/sysdep-i386/kernel-offsets.h
@@ -1,6 +1,7 @@
 #include <linux/stddef.h>
 #include <linux/sched.h>
 #include <linux/elf.h>
+#include <asm/mman.h>
 
 #define DEFINE(sym, val) \
 	asm volatile("\n->" #sym " %0 " #val : : "i" (val))
@@ -16,6 +17,7 @@
 void foo(void)
 {
 	OFFSET(HOST_TASK_DEBUGREGS, task_struct, thread.arch.debugregs);
+	DEFINE(KERNEL_MADV_REMOVE, MADV_REMOVE);
 #ifdef CONFIG_MODE_TT
 	OFFSET(HOST_TASK_EXTERN_PID, task_struct, thread.mode.tt.extern_pid);
 #endif
diff --git a/arch/um/include/sysdep-x86_64/kernel-offsets.h b/arch/um/include/sysdep-x86_64/kernel-offsets.h
index 5ce93abd0b54..939cc475757a 100644
--- a/arch/um/include/sysdep-x86_64/kernel-offsets.h
+++ b/arch/um/include/sysdep-x86_64/kernel-offsets.h
@@ -4,6 +4,7 @@
 #include <linux/time.h>
 #include <linux/elf.h>
 #include <asm/page.h>
+#include <asm/mman.h>
 
 #define DEFINE(sym, val) \
 	asm volatile("\n->" #sym " %0 " #val : : "i" (val))
@@ -18,6 +19,7 @@
 
 void foo(void)
 {
+	DEFINE(KERNEL_MADV_REMOVE, MADV_REMOVE);
 #ifdef CONFIG_MODE_TT
 	OFFSET(HOST_TASK_EXTERN_PID, task_struct, thread.mode.tt.extern_pid);
 #endif
diff --git a/arch/um/kernel/irq.c b/arch/um/kernel/irq.c
index c39ea3abeda4..2ffda012385e 100644
--- a/arch/um/kernel/irq.c
+++ b/arch/um/kernel/irq.c
@@ -89,16 +89,18 @@ void sigio_handler(int sig, union uml_pt_regs *regs)
 	struct irq_fd *irq_fd;
 	int n;
 
-	if(smp_sigio_handler()) return;
-	while(1){
+	if (smp_sigio_handler())
+		return;
+
+	while (1) {
 		n = os_waiting_for_events(active_fds);
 		if (n <= 0) {
 			if(n == -EINTR) continue;
 			else break;
 		}
 
-		for(irq_fd = active_fds; irq_fd != NULL; irq_fd = irq_fd->next){
-			if(irq_fd->current_events != 0){
+		for (irq_fd = active_fds; irq_fd != NULL; irq_fd = irq_fd->next) {
+			if (irq_fd->current_events != 0) {
 				irq_fd->current_events = 0;
 				do_IRQ(irq_fd->irq, regs);
 			}
@@ -110,19 +112,17 @@ void sigio_handler(int sig, union uml_pt_regs *regs)
 
 static void maybe_sigio_broken(int fd, int type)
 {
-	if(os_isatty(fd)){
-		if((type == IRQ_WRITE) && !pty_output_sigio){
+	if (os_isatty(fd)) {
+		if ((type == IRQ_WRITE) && !pty_output_sigio) {
 			write_sigio_workaround();
 			add_sigio_fd(fd, 0);
-		}
-		else if((type == IRQ_READ) && !pty_close_sigio){
+		} else if ((type == IRQ_READ) && !pty_close_sigio) {
 			write_sigio_workaround();
 			add_sigio_fd(fd, 1);
 		}
 	}
 }
 
-
 int activate_fd(int irq, int fd, int type, void *dev_id)
 {
 	struct pollfd *tmp_pfd;
@@ -132,16 +132,18 @@ int activate_fd(int irq, int fd, int type, void *dev_id)
 
 	pid = os_getpid();
 	err = os_set_fd_async(fd, pid);
-	if(err < 0)
+	if (err < 0)
 		goto out;
 
 	new_fd = um_kmalloc(sizeof(*new_fd));
 	err = -ENOMEM;
-	if(new_fd == NULL)
+	if (new_fd == NULL)
 		goto out;
 
-	if(type == IRQ_READ) events = UM_POLLIN | UM_POLLPRI;
-	else events = UM_POLLOUT;
+	if (type == IRQ_READ)
+		events = UM_POLLIN | UM_POLLPRI;
+	else
+		events = UM_POLLOUT;
 	*new_fd = ((struct irq_fd) { .next  		= NULL,
 				     .id 		= dev_id,
 				     .fd 		= fd,
@@ -165,8 +167,8 @@ int activate_fd(int irq, int fd, int type, void *dev_id)
 	 * a semaphore.
 	 */
 	flags = irq_lock();
-	for(irq_fd = active_fds; irq_fd != NULL; irq_fd = irq_fd->next){
-		if((irq_fd->fd == fd) && (irq_fd->type == type)){
+	for (irq_fd = active_fds; irq_fd != NULL; irq_fd = irq_fd->next) {
+		if ((irq_fd->fd == fd) && (irq_fd->type == type)) {
 			printk("Registering fd %d twice\n", fd);
 			printk("Irqs : %d, %d\n", irq_fd->irq, irq);
 			printk("Ids : 0x%p, 0x%p\n", irq_fd->id, dev_id);
@@ -175,13 +177,13 @@ int activate_fd(int irq, int fd, int type, void *dev_id)
 	}
 
 	/*-------------*/
-	if(type == IRQ_WRITE)
+	if (type == IRQ_WRITE)
 		fd = -1;
 
 	tmp_pfd = NULL;
 	n = 0;
 
-	while(1){
+	while (1) {
 		n = os_create_pollfd(fd, events, tmp_pfd, n);
 		if (n == 0)
 			break;
@@ -198,10 +200,8 @@ int activate_fd(int irq, int fd, int type, void *dev_id)
 		 * then we free the buffer tmp_fds and try again.
 		 */
 		irq_unlock(flags);
-		if (tmp_pfd != NULL) {
-			kfree(tmp_pfd);
-			tmp_pfd = NULL;
-		}
+		kfree(tmp_pfd);
+		tmp_pfd = NULL;
 
 		tmp_pfd = um_kmalloc(n);
 		if (tmp_pfd == NULL)
@@ -249,7 +249,7 @@ static int same_irq_and_dev(struct irq_fd *irq, void *d)
 {
 	struct irq_and_dev *data = d;
 
-	return((irq->irq == data->irq) && (irq->id == data->dev));
+	return ((irq->irq == data->irq) && (irq->id == data->dev));
 }
 
 void free_irq_by_irq_and_dev(unsigned int irq, void *dev)
@@ -262,7 +262,7 @@ void free_irq_by_irq_and_dev(unsigned int irq, void *dev)
 
 static int same_fd(struct irq_fd *irq, void *fd)
 {
-	return(irq->fd == *((int *) fd));
+	return (irq->fd == *((int *)fd));
 }
 
 void free_irq_by_fd(int fd)
@@ -276,16 +276,17 @@ static struct irq_fd *find_irq_by_fd(int fd, int irqnum, int *index_out)
 	int i = 0;
 	int fdi;
 
-	for(irq=active_fds; irq != NULL; irq = irq->next){
-		if((irq->fd == fd) && (irq->irq == irqnum)) break;
+	for (irq = active_fds; irq != NULL; irq = irq->next) {
+		if ((irq->fd == fd) && (irq->irq == irqnum))
+			break;
 		i++;
 	}
-	if(irq == NULL){
+	if (irq == NULL) {
 		printk("find_irq_by_fd doesn't have descriptor %d\n", fd);
 		goto out;
 	}
 	fdi = os_get_pollfd(i);
-	if((fdi != -1) && (fdi != fd)){
+	if ((fdi != -1) && (fdi != fd)) {
 		printk("find_irq_by_fd - mismatch between active_fds and "
 		       "pollfds, fd %d vs %d, need %d\n", irq->fd,
 		       fdi, fd);
@@ -294,7 +295,7 @@ static struct irq_fd *find_irq_by_fd(int fd, int irqnum, int *index_out)
 	}
 	*index_out = i;
  out:
-	return(irq);
+	return irq;
 }
 
 void reactivate_fd(int fd, int irqnum)
@@ -305,7 +306,7 @@ void reactivate_fd(int fd, int irqnum)
 
 	flags = irq_lock();
 	irq = find_irq_by_fd(fd, irqnum, &i);
-	if(irq == NULL){
+	if (irq == NULL) {
 		irq_unlock(flags);
 		return;
 	}
@@ -326,7 +327,7 @@ void deactivate_fd(int fd, int irqnum)
 
 	flags = irq_lock();
 	irq = find_irq_by_fd(fd, irqnum, &i);
-	if(irq == NULL)
+	if (irq == NULL)
 		goto out;
 	os_set_pollfd(i, -1);
  out:
@@ -338,15 +339,15 @@ int deactivate_all_fds(void)
 	struct irq_fd *irq;
 	int err;
 
-	for(irq=active_fds;irq != NULL;irq = irq->next){
+	for (irq = active_fds; irq != NULL; irq = irq->next) {
 		err = os_clear_fd_async(irq->fd);
-		if(err)
-			return(err);
+		if (err)
+			return err;
 	}
 	/* If there is a signal already queued, after unblocking ignore it */
 	os_set_ioignore();
 
-	return(0);
+	return 0;
 }
 
 void forward_interrupts(int pid)
@@ -356,9 +357,9 @@ void forward_interrupts(int pid)
 	int err;
 
 	flags = irq_lock();
-	for(irq=active_fds;irq != NULL;irq = irq->next){
+	for (irq = active_fds; irq != NULL; irq = irq->next) {
 		err = os_set_owner(irq->fd, pid);
-		if(err < 0){
+		if (err < 0) {
 			/* XXX Just remove the irq rather than
 			 * print out an infinite stream of these
 			 */
@@ -379,7 +380,7 @@ void forward_interrupts(int pid)
 unsigned int do_IRQ(int irq, union uml_pt_regs *regs)
 {
        irq_enter();
-       __do_IRQ(irq, (struct pt_regs *) regs);
+       __do_IRQ(irq, (struct pt_regs *)regs);
        irq_exit();
        return 1;
 }
@@ -392,12 +393,12 @@ int um_request_irq(unsigned int irq, int fd, int type,
 	int err;
 
 	err = request_irq(irq, handler, irqflags, devname, dev_id);
-	if(err)
-		return(err);
+	if (err)
+		return err;
 
-	if(fd != -1)
+	if (fd != -1)
 		err = activate_fd(irq, fd, type, dev_id);
-	return(err);
+	return err;
 }
 EXPORT_SYMBOL(um_request_irq);
 EXPORT_SYMBOL(reactivate_fd);
@@ -409,7 +410,7 @@ unsigned long irq_lock(void)
 	unsigned long flags;
 
 	spin_lock_irqsave(&irq_spinlock, flags);
-	return(flags);
+	return flags;
 }
 
 void irq_unlock(unsigned long flags)
@@ -452,7 +453,7 @@ void __init init_IRQ(void)
 	irq_desc[TIMER_IRQ].depth = 1;
 	irq_desc[TIMER_IRQ].handler = &SIGVTALRM_irq_type;
 	enable_irq(TIMER_IRQ);
-	for(i=1;i<NR_IRQS;i++){
+	for (i = 1; i < NR_IRQS; i++) {
 		irq_desc[i].status = IRQ_DISABLED;
 		irq_desc[i].action = NULL;
 		irq_desc[i].depth = 1;
@@ -467,7 +468,7 @@ int init_aio_irq(int irq, char *name, irqreturn_t (*handler)(int, void *,
 	int fds[2], err;
 
 	err = os_pipe(fds, 1, 1);
-	if(err){
+	if (err) {
 		printk("init_aio_irq - os_pipe failed, err = %d\n", -err);
 		goto out;
 	}
@@ -475,7 +476,7 @@ int init_aio_irq(int irq, char *name, irqreturn_t (*handler)(int, void *,
 	err = um_request_irq(irq, fds[0], IRQ_READ, handler,
 			     SA_INTERRUPT | SA_SAMPLE_RANDOM, name,
 			     (void *) (long) fds[0]);
-	if(err){
+	if (err) {
 		printk("init_aio_irq - : um_request_irq failed, err = %d\n",
 		       err);
 		goto out_close;
@@ -488,5 +489,5 @@ int init_aio_irq(int irq, char *name, irqreturn_t (*handler)(int, void *,
 	os_close_file(fds[0]);
 	os_close_file(fds[1]);
  out:
-	return(err);
+	return err;
 }
diff --git a/arch/um/kernel/physmem.c b/arch/um/kernel/physmem.c
index 0500800df1c1..fc0f0b085ca7 100644
--- a/arch/um/kernel/physmem.c
+++ b/arch/um/kernel/physmem.c
@@ -407,6 +407,8 @@ unsigned long find_iomem(char *driver, unsigned long *len_out)
 			*len_out = region->size;
 			return(region->virt);
 		}
+
+		region = region->next;
 	}
 
 	return(0);
diff --git a/arch/um/kernel/ptrace.c b/arch/um/kernel/ptrace.c
index 60d2eda995c1..9a77fb3c269d 100644
--- a/arch/um/kernel/ptrace.c
+++ b/arch/um/kernel/ptrace.c
@@ -275,15 +275,13 @@ void syscall_trace(union uml_pt_regs *regs, int entryexit)
 
 	if (unlikely(current->audit_context)) {
 		if (!entryexit)
-			audit_syscall_entry(current,
-                                            HOST_AUDIT_ARCH,
+			audit_syscall_entry(HOST_AUDIT_ARCH,
 					    UPT_SYSCALL_NR(regs),
 					    UPT_SYSCALL_ARG1(regs),
 					    UPT_SYSCALL_ARG2(regs),
 					    UPT_SYSCALL_ARG3(regs),
 					    UPT_SYSCALL_ARG4(regs));
-		else audit_syscall_exit(current,
-                                        AUDITSC_RESULT(UPT_SYSCALL_RET(regs)),
+		else audit_syscall_exit(AUDITSC_RESULT(UPT_SYSCALL_RET(regs)),
                                         UPT_SYSCALL_RET(regs));
 	}
 
diff --git a/arch/um/kernel/skas/Makefile b/arch/um/kernel/skas/Makefile
index 57181a920d48..ea3a8e409a6e 100644
--- a/arch/um/kernel/skas/Makefile
+++ b/arch/um/kernel/skas/Makefile
@@ -6,9 +6,11 @@
 obj-y := clone.o exec_kern.o mem.o mmu.o process_kern.o \
 	syscall.o tlb.o uaccess.o
 
-USER_OBJS := clone.o
+# clone.o is in the stub, so it can't be built with profiling
+# GCC hardened also auto-enables -fpic, but we need %ebx so it can't work ->
+# disable it
 
-include arch/um/scripts/Makefile.rules
+CFLAGS_clone.o := $(CFLAGS_NO_HARDENING)
+UNPROFILE_OBJS := clone.o
 
-# clone.o is in the stub, so it can't be built with profiling
-$(obj)/clone.o : c_flags = -Wp,-MD,$(depfile) $(call unprofile,$(USER_CFLAGS))
+include arch/um/scripts/Makefile.rules
diff --git a/arch/um/kernel/time_kern.c b/arch/um/kernel/time_kern.c
index 3c7626cdba4b..86f51d04c98d 100644
--- a/arch/um/kernel/time_kern.c
+++ b/arch/um/kernel/time_kern.c
@@ -84,6 +84,16 @@ void timer_irq(union uml_pt_regs *regs)
 	}
 }
 
+
+void time_init_kern(void)
+{
+	unsigned long long nsecs;
+
+	nsecs = os_nsecs();
+	set_normalized_timespec(&wall_to_monotonic, -nsecs / BILLION,
+				-nsecs % BILLION);
+}
+
 void do_boot_timer_handler(struct sigcontext * sc)
 {
 	struct pt_regs regs;
@@ -209,4 +219,4 @@ int __init timer_init(void)
 	return(0);
 }
 
-__initcall(timer_init);
+arch_initcall(timer_init);
diff --git a/arch/um/os-Linux/file.c b/arch/um/os-Linux/file.c
index 3bd10deea280..09251338d99e 100644
--- a/arch/um/os-Linux/file.c
+++ b/arch/um/os-Linux/file.c
@@ -171,7 +171,7 @@ int os_sigio_async(int master, int slave)
 
 	flags = fcntl(master, F_GETFL);
 	if(flags < 0)
-		return errno;
+		return -errno;
 
 	if((fcntl(master, F_SETFL, flags | O_NONBLOCK | O_ASYNC) < 0) ||
 	   (fcntl(master, F_SETOWN, os_getpid()) < 0))
diff --git a/arch/um/os-Linux/irq.c b/arch/um/os-Linux/irq.c
index e599be423da1..3788d4568d33 100644
--- a/arch/um/os-Linux/irq.c
+++ b/arch/um/os-Linux/irq.c
@@ -29,21 +29,21 @@ int os_waiting_for_events(struct irq_fd *active_fds)
 	int i, n, err;
 
 	n = poll(pollfds, pollfds_num, 0);
-	if(n < 0){
+	if (n < 0) {
 		err = -errno;
-		if(errno != EINTR)
+		if (errno != EINTR)
 			printk("sigio_handler: os_waiting_for_events:"
 			       " poll returned %d, errno = %d\n", n, errno);
 		return err;
 	}
 
-	if(n == 0)
+	if (n == 0)
 		return 0;
 
 	irq_fd = active_fds;
 
-	for(i = 0; i < pollfds_num; i++){
-		if(pollfds[i].revents != 0){
+	for (i = 0; i < pollfds_num; i++) {
+		if (pollfds[i].revents != 0) {
 			irq_fd->current_events = pollfds[i].revents;
 			pollfds[i].fd = -1;
 		}
@@ -54,7 +54,7 @@ int os_waiting_for_events(struct irq_fd *active_fds)
 
 int os_isatty(int fd)
 {
-	return(isatty(fd));
+	return isatty(fd);
 }
 
 int os_create_pollfd(int fd, int events, void *tmp_pfd, int size_tmpfds)
@@ -65,7 +65,7 @@ int os_create_pollfd(int fd, int events, void *tmp_pfd, int size_tmpfds)
 			return((pollfds_size + 1) * sizeof(pollfds[0]));
 		}
 
-		if(pollfds != NULL){
+		if (pollfds != NULL) {
 			memcpy(tmp_pfd, pollfds,
 			       sizeof(pollfds[0]) * pollfds_size);
 			/* remove old pollfds */
@@ -73,18 +73,15 @@ int os_create_pollfd(int fd, int events, void *tmp_pfd, int size_tmpfds)
 		}
 		pollfds = tmp_pfd;
 		pollfds_size++;
-	} else {
-		/* remove not used tmp_pfd */
-		if (tmp_pfd != NULL)
-			kfree(tmp_pfd);
-	}
+	} else
+		kfree(tmp_pfd);	/* remove not used tmp_pfd */
 
-	pollfds[pollfds_num] = ((struct pollfd) { .fd 	= fd,
-						  .events 	= events,
-						  .revents 	= 0 });
+	pollfds[pollfds_num] = ((struct pollfd) { .fd		= fd,
+						  .events	= events,
+						  .revents	= 0 });
 	pollfds_num++;
 
-	return(0);
+	return 0;
 }
 
 void os_free_irq_by_cb(int (*test)(struct irq_fd *, void *), void *arg,
@@ -94,11 +91,11 @@ void os_free_irq_by_cb(int (*test)(struct irq_fd *, void *), void *arg,
 	int i = 0;
 
 	prev = &active_fds;
-	while(*prev != NULL){
-		if((*test)(*prev, arg)){
+	while (*prev != NULL) {
+		if ((*test)(*prev, arg)) {
 			struct irq_fd *old_fd = *prev;
-			if((pollfds[i].fd != -1) &&
-			   (pollfds[i].fd != (*prev)->fd)){
+			if ((pollfds[i].fd != -1) &&
+			    (pollfds[i].fd != (*prev)->fd)) {
 				printk("os_free_irq_by_cb - mismatch between "
 				       "active_fds and pollfds, fd %d vs %d\n",
 				       (*prev)->fd, pollfds[i].fd);
@@ -110,7 +107,6 @@ void os_free_irq_by_cb(int (*test)(struct irq_fd *, void *), void *arg,
 			/* This moves the *whole* array after pollfds[i]
 			 * (though it doesn't spot as such)!
 			 */
-
 			memmove(&pollfds[i], &pollfds[i + 1],
 			       (pollfds_num - i) * sizeof(pollfds[0]));
 			if(*last_irq_ptr2 == &old_fd->next)
@@ -129,10 +125,9 @@ void os_free_irq_by_cb(int (*test)(struct irq_fd *, void *), void *arg,
 	return;
 }
 
-
 int os_get_pollfd(int i)
 {
-	return(pollfds[i].fd);
+	return pollfds[i].fd;
 }
 
 void os_set_pollfd(int i, int fd)
@@ -151,8 +146,10 @@ void init_irq_signals(int on_sigstack)
 	int flags;
 
 	flags = on_sigstack ? SA_ONSTACK : 0;
-	if(timer_irq_inited) h = (__sighandler_t) alarm_handler;
-	else h = boot_timer_handler;
+	if (timer_irq_inited)
+		h = (__sighandler_t)alarm_handler;
+	else
+		h = boot_timer_handler;
 
 	set_handler(SIGVTALRM, h, flags | SA_RESTART,
 		    SIGUSR1, SIGIO, SIGWINCH, SIGALRM, -1);
diff --git a/arch/um/os-Linux/main.c b/arch/um/os-Linux/main.c
index 2878e89a674f..90912aaca7aa 100644
--- a/arch/um/os-Linux/main.c
+++ b/arch/um/os-Linux/main.c
@@ -59,7 +59,7 @@ static __init void do_uml_initcalls(void)
 	initcall_t *call;
 
 	call = &__uml_initcall_start;
-	while (call < &__uml_initcall_end){;
+	while (call < &__uml_initcall_end){
 		(*call)();
 		call++;
 	}
@@ -74,6 +74,34 @@ static void last_ditch_exit(int sig)
 	exit(1);
 }
 
+#define UML_LIB_PATH	":/usr/lib/uml"
+
+static void setup_env_path(void)
+{
+	char *new_path = NULL;
+	char *old_path = NULL;
+	int path_len = 0;
+
+	old_path = getenv("PATH");
+	/* if no PATH variable is set or it has an empty value
+	 * just use the default + /usr/lib/uml
+	 */
+	if (!old_path || (path_len = strlen(old_path)) == 0) {
+		putenv("PATH=:/bin:/usr/bin/" UML_LIB_PATH);
+		return;
+	}
+
+	/* append /usr/lib/uml to the existing path */
+	path_len += strlen("PATH=" UML_LIB_PATH) + 1;
+	new_path = malloc(path_len);
+	if (!new_path) {
+		perror("coudn't malloc to set a new PATH");
+		return;
+	}
+	snprintf(new_path, path_len, "PATH=%s" UML_LIB_PATH, old_path);
+	putenv(new_path);
+}
+
 extern int uml_exitcode;
 
 extern void scan_elf_aux( char **envp);
@@ -114,6 +142,8 @@ int main(int argc, char **argv, char **envp)
 
 	set_stklim();
 
+	setup_env_path();
+
 	new_argv = malloc((argc + 1) * sizeof(char *));
 	if(new_argv == NULL){
 		perror("Mallocing argv");
diff --git a/arch/um/os-Linux/mem.c b/arch/um/os-Linux/mem.c
index 71bb90a7606d..c6432e729241 100644
--- a/arch/um/os-Linux/mem.c
+++ b/arch/um/os-Linux/mem.c
@@ -8,6 +8,7 @@
 #include <fcntl.h>
 #include <sys/types.h>
 #include <sys/mman.h>
+#include <sys/statfs.h>
 #include "kern_util.h"
 #include "user.h"
 #include "user_util.h"
@@ -19,6 +20,7 @@
 
 #include <sys/param.h>
 
+static char *default_tmpdir = "/tmp";
 static char *tempdir = NULL;
 
 static void __init find_tempdir(void)
@@ -34,7 +36,7 @@ static void __init find_tempdir(void)
 			break;
 	}
 	if((dir == NULL) || (*dir == '\0'))
-		dir = "/tmp";
+		dir = default_tmpdir;
 
 	tempdir = malloc(strlen(dir) + 2);
 	if(tempdir == NULL){
@@ -46,6 +48,96 @@ static void __init find_tempdir(void)
 	strcat(tempdir, "/");
 }
 
+/* This will return 1, with the first character in buf being the
+ * character following the next instance of c in the file.  This will
+ * read the file as needed.  If there's an error, -errno is returned;
+ * if the end of the file is reached, 0 is returned.
+ */
+static int next(int fd, char *buf, int size, char c)
+{
+	int n;
+	char *ptr;
+
+	while((ptr = strchr(buf, c)) == NULL){
+		n = read(fd, buf, size - 1);
+		if(n == 0)
+			return 0;
+		else if(n < 0)
+			return -errno;
+
+		buf[n] = '\0';
+	}
+
+	ptr++;
+	memmove(buf, ptr, strlen(ptr) + 1);
+	return 1;
+}
+
+static int checked_tmpdir = 0;
+
+/* Look for a tmpfs mounted at /dev/shm.  I couldn't find a cleaner
+ * way to do this than to parse /proc/mounts.  statfs will return the
+ * same filesystem magic number and fs id for both /dev and /dev/shm
+ * when they are both tmpfs, so you can't tell if they are different
+ * filesystems.  Also, there seems to be no other way of finding the
+ * mount point of a filesystem from within it.
+ *
+ * If a /dev/shm tmpfs entry is found, then we switch to using it.
+ * Otherwise, we stay with the default /tmp.
+ */
+static void which_tmpdir(void)
+{
+	int fd, found;
+	char buf[128] = { '\0' };
+
+	if(checked_tmpdir)
+		return;
+
+	checked_tmpdir = 1;
+
+	printf("Checking for tmpfs mount on /dev/shm...");
+
+	fd = open("/proc/mounts", O_RDONLY);
+	if(fd < 0){
+		printf("failed to open /proc/mounts, errno = %d\n", errno);
+		return;
+	}
+
+	while(1){
+		found = next(fd, buf, sizeof(buf) / sizeof(buf[0]), ' ');
+		if(found != 1)
+			break;
+
+		if(!strncmp(buf, "/dev/shm", strlen("/dev/shm")))
+			goto found;
+
+		found = next(fd, buf, sizeof(buf) / sizeof(buf[0]), '\n');
+		if(found != 1)
+			break;
+	}
+
+err:
+	if(found == 0)
+		printf("nothing mounted on /dev/shm\n");
+	else if(found < 0)
+		printf("read returned errno %d\n", -found);
+
+	return;
+
+found:
+	found = next(fd, buf, sizeof(buf) / sizeof(buf[0]), ' ');
+	if(found != 1)
+		goto err;
+
+	if(strncmp(buf, "tmpfs", strlen("tmpfs"))){
+		printf("not tmpfs\n");
+		return;
+	}
+
+	printf("OK\n");
+	default_tmpdir = "/dev/shm";
+}
+
 /*
  * This proc still used in tt-mode
  * (file: kernel/tt/ptproxy/proxy.c, proc: start_debugger).
@@ -56,6 +148,7 @@ int make_tempfile(const char *template, char **out_tempname, int do_unlink)
 	char *tempname;
 	int fd;
 
+	which_tmpdir();
 	tempname = malloc(MAXPATHLEN);
 
 	find_tempdir();
@@ -137,3 +230,26 @@ int create_mem_file(unsigned long long len)
 	}
 	return(fd);
 }
+
+
+void check_tmpexec(void)
+{
+	void *addr;
+	int err, fd = create_tmp_file(UM_KERN_PAGE_SIZE);
+
+	addr = mmap(NULL, UM_KERN_PAGE_SIZE,
+		    PROT_READ | PROT_WRITE | PROT_EXEC, MAP_PRIVATE, fd, 0);
+	printf("Checking PROT_EXEC mmap in %s...",tempdir);
+	fflush(stdout);
+	if(addr == MAP_FAILED){
+		err = errno;
+		perror("failed");
+		if(err == EPERM)
+			printf("%s must be not mounted noexec\n",tempdir);
+		exit(1);
+	}
+	printf("OK\n");
+	munmap(addr, UM_KERN_PAGE_SIZE);
+
+	close(fd);
+}
diff --git a/arch/um/os-Linux/process.c b/arch/um/os-Linux/process.c
index 8176b0b52047..233be2f4f8cb 100644
--- a/arch/um/os-Linux/process.c
+++ b/arch/um/os-Linux/process.c
@@ -190,7 +190,7 @@ int os_unmap_memory(void *addr, int len)
 }
 
 #ifndef MADV_REMOVE
-#define MADV_REMOVE	0x5		/* remove these pages & resources */
+#define MADV_REMOVE KERNEL_MADV_REMOVE
 #endif
 
 int os_drop_memory(void *addr, int length)
@@ -206,29 +206,36 @@ int os_drop_memory(void *addr, int length)
 int can_drop_memory(void)
 {
 	void *addr;
-	int fd;
+	int fd, ok = 0;
 
 	printk("Checking host MADV_REMOVE support...");
 	fd = create_mem_file(UM_KERN_PAGE_SIZE);
 	if(fd < 0){
 		printk("Creating test memory file failed, err = %d\n", -fd);
-		return 0;
+		goto out;
 	}
 
 	addr = mmap64(NULL, UM_KERN_PAGE_SIZE, PROT_READ | PROT_WRITE,
-		      MAP_PRIVATE, fd, 0);
+		      MAP_SHARED, fd, 0);
 	if(addr == MAP_FAILED){
 		printk("Mapping test memory file failed, err = %d\n", -errno);
-		return 0;
+		goto out_close;
 	}
 
 	if(madvise(addr, UM_KERN_PAGE_SIZE, MADV_REMOVE) != 0){
 		printk("MADV_REMOVE failed, err = %d\n", -errno);
-		return 0;
+		goto out_unmap;
 	}
 
 	printk("OK\n");
-	return 1;
+	ok = 1;
+
+out_unmap:
+	munmap(addr, UM_KERN_PAGE_SIZE);
+out_close:
+	close(fd);
+out:
+	return ok;
 }
 
 void init_new_thread_stack(void *sig_stack, void (*usr1_handler)(int))
@@ -266,11 +273,11 @@ void init_new_thread_signals(int altstack)
 
 int run_kernel_thread(int (*fn)(void *), void *arg, void **jmp_ptr)
 {
-	sigjmp_buf buf;
+	jmp_buf buf;
 	int n, enable;
 
 	*jmp_ptr = &buf;
-	n = UML_SIGSETJMP(&buf, enable);
+	n = UML_SETJMP(&buf, enable);
 	if(n != 0)
 		return(n);
 	(*fn)(arg);
diff --git a/arch/um/os-Linux/skas/process.c b/arch/um/os-Linux/skas/process.c
index 045ae0037456..bd89c6b99d5d 100644
--- a/arch/um/os-Linux/skas/process.c
+++ b/arch/um/os-Linux/skas/process.c
@@ -344,12 +344,12 @@ int copy_context_skas0(unsigned long new_stack, int pid)
 	err = ptrace_setregs(pid, regs);
 	if(err < 0)
 		panic("copy_context_skas0 : PTRACE_SETREGS failed, "
-		      "pid = %d, errno = %d\n", pid, errno);
+		      "pid = %d, errno = %d\n", pid, -err);
 
 	err = ptrace_setfpregs(pid, fp_regs);
 	if(err < 0)
 		panic("copy_context_skas0 : PTRACE_SETFPREGS failed, "
-		      "pid = %d, errno = %d\n", pid, errno);
+		      "pid = %d, errno = %d\n", pid, -err);
 
 	/* set a well known return code for detection of child write failure */
 	child_data->err = 12345678;
@@ -362,7 +362,7 @@ int copy_context_skas0(unsigned long new_stack, int pid)
 	pid = data->err;
 	if(pid < 0)
 		panic("copy_context_skas0 - stub-parent reports error %d\n",
-		      pid);
+		      -pid);
 
 	/* Wait, until child has finished too: read child's result from
 	 * child's stack and check it.
@@ -434,7 +434,7 @@ void new_thread(void *stack, void **switch_buf_ptr, void **fork_buf_ptr,
 		void (*handler)(int))
 {
 	unsigned long flags;
-	sigjmp_buf switch_buf, fork_buf;
+	jmp_buf switch_buf, fork_buf;
 	int enable;
 
 	*switch_buf_ptr = &switch_buf;
@@ -450,7 +450,7 @@ void new_thread(void *stack, void **switch_buf_ptr, void **fork_buf_ptr,
 	 */
 	flags = get_signals();
 	block_signals();
-	if(UML_SIGSETJMP(&fork_buf, enable) == 0)
+	if(UML_SETJMP(&fork_buf, enable) == 0)
 		new_thread_proc(stack, handler);
 
 	remove_sigstack();
@@ -466,35 +466,35 @@ void new_thread(void *stack, void **switch_buf_ptr, void **fork_buf_ptr,
 
 void thread_wait(void *sw, void *fb)
 {
-	sigjmp_buf buf, **switch_buf = sw, *fork_buf;
+	jmp_buf buf, **switch_buf = sw, *fork_buf;
 	int enable;
 
 	*switch_buf = &buf;
 	fork_buf = fb;
-	if(UML_SIGSETJMP(&buf, enable) == 0)
+	if(UML_SETJMP(&buf, enable) == 0)
 		siglongjmp(*fork_buf, INIT_JMP_REMOVE_SIGSTACK);
 }
 
 void switch_threads(void *me, void *next)
 {
-	sigjmp_buf my_buf, **me_ptr = me, *next_buf = next;
+	jmp_buf my_buf, **me_ptr = me, *next_buf = next;
 	int enable;
 
 	*me_ptr = &my_buf;
-	if(UML_SIGSETJMP(&my_buf, enable) == 0)
-		UML_SIGLONGJMP(next_buf, 1);
+	if(UML_SETJMP(&my_buf, enable) == 0)
+		UML_LONGJMP(next_buf, 1);
 }
 
-static sigjmp_buf initial_jmpbuf;
+static jmp_buf initial_jmpbuf;
 
 /* XXX Make these percpu */
 static void (*cb_proc)(void *arg);
 static void *cb_arg;
-static sigjmp_buf *cb_back;
+static jmp_buf *cb_back;
 
 int start_idle_thread(void *stack, void *switch_buf_ptr, void **fork_buf_ptr)
 {
-	sigjmp_buf **switch_buf = switch_buf_ptr;
+	jmp_buf **switch_buf = switch_buf_ptr;
 	int n, enable;
 
 	set_handler(SIGWINCH, (__sighandler_t) sig_handler,
@@ -502,7 +502,7 @@ int start_idle_thread(void *stack, void *switch_buf_ptr, void **fork_buf_ptr)
 		    SIGVTALRM, -1);
 
 	*fork_buf_ptr = &initial_jmpbuf;
-	n = UML_SIGSETJMP(&initial_jmpbuf, enable);
+	n = UML_SETJMP(&initial_jmpbuf, enable);
 	switch(n){
 	case INIT_JMP_NEW_THREAD:
 		new_thread_proc((void *) stack, new_thread_handler);
@@ -512,7 +512,7 @@ int start_idle_thread(void *stack, void *switch_buf_ptr, void **fork_buf_ptr)
 		break;
 	case INIT_JMP_CALLBACK:
 		(*cb_proc)(cb_arg);
-		UML_SIGLONGJMP(cb_back, 1);
+		UML_LONGJMP(cb_back, 1);
 		break;
 	case INIT_JMP_HALT:
 		kmalloc_ok = 0;
@@ -523,12 +523,12 @@ int start_idle_thread(void *stack, void *switch_buf_ptr, void **fork_buf_ptr)
 	default:
 		panic("Bad sigsetjmp return in start_idle_thread - %d\n", n);
 	}
-	UML_SIGLONGJMP(*switch_buf, 1);
+	UML_LONGJMP(*switch_buf, 1);
 }
 
 void initial_thread_cb_skas(void (*proc)(void *), void *arg)
 {
-	sigjmp_buf here;
+	jmp_buf here;
 	int enable;
 
 	cb_proc = proc;
@@ -536,8 +536,8 @@ void initial_thread_cb_skas(void (*proc)(void *), void *arg)
 	cb_back = &here;
 
 	block_signals();
-	if(UML_SIGSETJMP(&here, enable) == 0)
-		UML_SIGLONGJMP(&initial_jmpbuf, INIT_JMP_CALLBACK);
+	if(UML_SETJMP(&here, enable) == 0)
+		UML_LONGJMP(&initial_jmpbuf, INIT_JMP_CALLBACK);
 	unblock_signals();
 
 	cb_proc = NULL;
@@ -548,13 +548,13 @@ void initial_thread_cb_skas(void (*proc)(void *), void *arg)
 void halt_skas(void)
 {
 	block_signals();
-	UML_SIGLONGJMP(&initial_jmpbuf, INIT_JMP_HALT);
+	UML_LONGJMP(&initial_jmpbuf, INIT_JMP_HALT);
 }
 
 void reboot_skas(void)
 {
 	block_signals();
-	UML_SIGLONGJMP(&initial_jmpbuf, INIT_JMP_REBOOT);
+	UML_LONGJMP(&initial_jmpbuf, INIT_JMP_REBOOT);
 }
 
 void switch_mm_skas(struct mm_id *mm_idp)
diff --git a/arch/um/os-Linux/start_up.c b/arch/um/os-Linux/start_up.c
index 387e26af301a..503148504009 100644
--- a/arch/um/os-Linux/start_up.c
+++ b/arch/um/os-Linux/start_up.c
@@ -296,29 +296,7 @@ static void __init check_ptrace(void)
 	check_sysemu();
 }
 
-extern int create_tmp_file(unsigned long long len);
-
-static void check_tmpexec(void)
-{
-	void *addr;
-	int err, fd = create_tmp_file(UM_KERN_PAGE_SIZE);
-
-	addr = mmap(NULL, UM_KERN_PAGE_SIZE,
-		    PROT_READ | PROT_WRITE | PROT_EXEC, MAP_PRIVATE, fd, 0);
-	printf("Checking PROT_EXEC mmap in /tmp...");
-	fflush(stdout);
-	if(addr == MAP_FAILED){
-		err = errno;
-		perror("failed");
-		if(err == EPERM)
-			printf("/tmp must be not mounted noexec\n");
-		exit(1);
-	}
-	printf("OK\n");
-	munmap(addr, UM_KERN_PAGE_SIZE);
-
-	close(fd);
-}
+extern void check_tmpexec(void);
 
 void os_early_checks(void)
 {
diff --git a/arch/um/os-Linux/sys-i386/registers.c b/arch/um/os-Linux/sys-i386/registers.c
index 7a6f6b99ceff..516f66dd87e3 100644
--- a/arch/um/os-Linux/sys-i386/registers.c
+++ b/arch/um/os-Linux/sys-i386/registers.c
@@ -104,7 +104,7 @@ void init_registers(int pid)
 	err = ptrace(PTRACE_GETREGS, pid, 0, exec_regs);
 	if(err)
 		panic("check_ptrace : PTRACE_GETREGS failed, errno = %d",
-		      err);
+		      errno);
 
 	errno = 0;
 	err = ptrace(PTRACE_GETFPXREGS, pid, 0, exec_fpx_regs);
@@ -119,7 +119,7 @@ void init_registers(int pid)
 	err = ptrace(PTRACE_GETFPREGS, pid, 0, exec_fp_regs);
 	if(err)
 		panic("check_ptrace : PTRACE_GETFPREGS failed, errno = %d",
-		      err);
+		      errno);
 }
 
 void get_safe_registers(unsigned long *regs, unsigned long *fp_regs)
diff --git a/arch/um/os-Linux/sys-x86_64/registers.c b/arch/um/os-Linux/sys-x86_64/registers.c
index 001941fa1a1e..becd898d9398 100644
--- a/arch/um/os-Linux/sys-x86_64/registers.c
+++ b/arch/um/os-Linux/sys-x86_64/registers.c
@@ -62,12 +62,12 @@ void init_registers(int pid)
 	err = ptrace(PTRACE_GETREGS, pid, 0, exec_regs);
 	if(err)
 		panic("check_ptrace : PTRACE_GETREGS failed, errno = %d",
-		      err);
+		      errno);
 
 	err = ptrace(PTRACE_GETFPREGS, pid, 0, exec_fp_regs);
 	if(err)
 		panic("check_ptrace : PTRACE_GETFPREGS failed, errno = %d",
-		      err);
+		      errno);
 }
 
 void get_safe_registers(unsigned long *regs, unsigned long *fp_regs)
diff --git a/arch/um/os-Linux/time.c b/arch/um/os-Linux/time.c
index 6f7626775acb..280c4fb9b585 100644
--- a/arch/um/os-Linux/time.c
+++ b/arch/um/os-Linux/time.c
@@ -81,20 +81,12 @@ void uml_idle_timer(void)
 	set_interval(ITIMER_REAL);
 }
 
-extern void ktime_get_ts(struct timespec *ts);
-#define do_posix_clock_monotonic_gettime(ts) ktime_get_ts(ts)
-
 void time_init(void)
 {
-	struct timespec now;
-
 	if(signal(SIGVTALRM, boot_timer_handler) == SIG_ERR)
 		panic("Couldn't set SIGVTALRM handler");
 	set_interval(ITIMER_VIRTUAL);
-
-	do_posix_clock_monotonic_gettime(&now);
-	wall_to_monotonic.tv_sec = -now.tv_sec;
-	wall_to_monotonic.tv_nsec = -now.tv_nsec;
+	time_init_kern();
 }
 
 unsigned long long os_nsecs(void)
diff --git a/arch/um/os-Linux/trap.c b/arch/um/os-Linux/trap.c
index a9f6b26f9828..90b29ae9af46 100644
--- a/arch/um/os-Linux/trap.c
+++ b/arch/um/os-Linux/trap.c
@@ -35,7 +35,7 @@ void os_fill_handlinfo(struct kern_handlers h)
 
 void do_longjmp(void *b, int val)
 {
-	sigjmp_buf *buf = b;
+	jmp_buf *buf = b;
 
-	UML_SIGLONGJMP(buf, val);
+	UML_LONGJMP(buf, val);
 }
diff --git a/arch/um/os-Linux/uaccess.c b/arch/um/os-Linux/uaccess.c
index 166fb66995df..e523719330b2 100644
--- a/arch/um/os-Linux/uaccess.c
+++ b/arch/um/os-Linux/uaccess.c
@@ -16,9 +16,9 @@ unsigned long __do_user_copy(void *to, const void *from, int n,
 	unsigned long *faddrp = (unsigned long *) fault_addr, ret;
 	int enable;
 
-	sigjmp_buf jbuf;
+	jmp_buf jbuf;
 	*fault_catcher = &jbuf;
-	if(UML_SIGSETJMP(&jbuf, enable) == 0){
+	if(UML_SETJMP(&jbuf, enable) == 0){
 		(*op)(to, from, n);
 		ret = 0;
 		*faulted_out = 0;
diff --git a/arch/um/os-Linux/umid.c b/arch/um/os-Linux/umid.c
index 34bfc1bb9e38..362db059fe30 100644
--- a/arch/um/os-Linux/umid.c
+++ b/arch/um/os-Linux/umid.c
@@ -178,14 +178,14 @@ static void __init create_pid_file(void)
 	fd = open(file, O_RDWR | O_CREAT | O_EXCL, 0644);
 	if(fd < 0){
 		printk("Open of machine pid file \"%s\" failed: %s\n",
-		       file, strerror(-fd));
+		       file, strerror(errno));
 		return;
 	}
 
 	snprintf(pid, sizeof(pid), "%d\n", getpid());
 	n = write(fd, pid, strlen(pid));
 	if(n != strlen(pid))
-		printk("Write of pid file failed - err = %d\n", -n);
+		printk("Write of pid file failed - err = %d\n", errno);
 
 	close(fd);
 }
diff --git a/arch/um/os-Linux/user_syms.c b/arch/um/os-Linux/user_syms.c
index 2598158e1f53..3f33165ada68 100644
--- a/arch/um/os-Linux/user_syms.c
+++ b/arch/um/os-Linux/user_syms.c
@@ -96,6 +96,13 @@ EXPORT_SYMBOL_PROTO(getuid);
 EXPORT_SYMBOL_PROTO(fsync);
 EXPORT_SYMBOL_PROTO(fdatasync);
 
+/* Export symbols used by GCC for the stack protector. */
+extern void __stack_smash_handler(void *) __attribute__((weak));
+EXPORT_SYMBOL(__stack_smash_handler);
+
+extern long __guard __attribute__((weak));
+EXPORT_SYMBOL(__guard);
+
 /*
  * Overrides for Emacs so that we follow Linus's tabbing style.
  * Emacs will notice this stuff at the end of the file and automatically
diff --git a/arch/um/os-Linux/util.c b/arch/um/os-Linux/util.c
index e32065e2fdc8..c47a2a7ce70e 100644
--- a/arch/um/os-Linux/util.c
+++ b/arch/um/os-Linux/util.c
@@ -104,7 +104,7 @@ void setup_hostinfo(void)
 int setjmp_wrapper(void (*proc)(void *, void *), ...)
 {
 	va_list args;
-	sigjmp_buf buf;
+	jmp_buf buf;
 	int n;
 
 	n = sigsetjmp(buf, 1);
diff --git a/arch/um/scripts/Makefile.rules b/arch/um/scripts/Makefile.rules
index 5e7a9c310aa5..1347dc6d5218 100644
--- a/arch/um/scripts/Makefile.rules
+++ b/arch/um/scripts/Makefile.rules
@@ -7,11 +7,19 @@ USER_SINGLE_OBJS := \
 USER_OBJS += $(filter %_user.o,$(obj-y) $(obj-m)  $(USER_SINGLE_OBJS))
 USER_OBJS := $(foreach file,$(USER_OBJS),$(obj)/$(file))
 
-$(USER_OBJS) $(USER_OBJS:.o=.i) $(USER_OBJS:.o=.s) $(USER_OBJS:.o=.lst): \
-	c_flags = -Wp,-MD,$(depfile) $(USER_CFLAGS) $(CFLAGS_$(notdir $@))
+$(USER_OBJS:.o=.%): \
+	c_flags = -Wp,-MD,$(depfile) $(USER_CFLAGS) $(CFLAGS_$(*F).o)
 $(USER_OBJS) : CHECKFLAGS := -D__linux__ -Dlinux -D__STDC__ \
 	-Dunix -D__unix__ -D__$(SUBARCH)__
 
+# These are like USER_OBJS but filter USER_CFLAGS through unprofile instead of
+# using it directly.
+UNPROFILE_OBJS := $(foreach file,$(UNPROFILE_OBJS),$(obj)/$(file))
+
+$(UNPROFILE_OBJS:.o=.%): \
+	c_flags = -Wp,-MD,$(depfile) $(call unprofile,$(USER_CFLAGS)) $(CFLAGS_$(*F).o)
+$(UNPROFILE_OBJS) : CHECKFLAGS := -D__linux__ -Dlinux -D__STDC__ \
+	-Dunix -D__unix__ -D__$(SUBARCH)__
 
 # The stubs and unmap.o can't try to call mcount or update basic block data
 define unprofile
diff --git a/arch/um/sys-i386/Makefile b/arch/um/sys-i386/Makefile
index 98b20b7bba4f..374d61a19439 100644
--- a/arch/um/sys-i386/Makefile
+++ b/arch/um/sys-i386/Makefile
@@ -8,11 +8,16 @@ subarch-obj-y = lib/bitops.o kernel/semaphore.o
 subarch-obj-$(CONFIG_HIGHMEM) += mm/highmem.o
 subarch-obj-$(CONFIG_MODULES) += kernel/module.o
 
-USER_OBJS := bugs.o ptrace_user.o sigcontext.o fault.o stub_segv.o
+USER_OBJS := bugs.o ptrace_user.o sigcontext.o fault.o
 
-include arch/um/scripts/Makefile.rules
+USER_OBJS += user-offsets.s
+extra-y += user-offsets.s
 
 extra-$(CONFIG_MODE_TT) += unmap.o
 
-$(obj)/stub_segv.o $(obj)/unmap.o: \
-	_c_flags = $(call unprofile,$(CFLAGS))
+UNPROFILE_OBJS := stub_segv.o
+CFLAGS_stub_segv.o := $(CFLAGS_NO_HARDENING)
+
+include arch/um/scripts/Makefile.rules
+
+$(obj)/unmap.%: _c_flags = $(call unprofile,$(CFLAGS))
diff --git a/arch/um/sys-i386/signal.c b/arch/um/sys-i386/signal.c
index 618fd8594643..0709fc6670c2 100644
--- a/arch/um/sys-i386/signal.c
+++ b/arch/um/sys-i386/signal.c
@@ -57,7 +57,7 @@ static int copy_sc_from_user_skas(struct pt_regs *regs,
 	return(0);
 }
 
-int copy_sc_to_user_skas(struct sigcontext *to, struct _fpstate __user *to_fp,
+int copy_sc_to_user_skas(struct sigcontext __user *to, struct _fpstate __user *to_fp,
                          struct pt_regs *regs, unsigned long sp)
 {
   	struct sigcontext sc;
@@ -132,7 +132,7 @@ int copy_sc_from_user_tt(struct sigcontext *to, struct sigcontext __user *from,
 	return(err);
 }
 
-int copy_sc_to_user_tt(struct sigcontext *to, struct _fpstate __user *fp,
+int copy_sc_to_user_tt(struct sigcontext __user *to, struct _fpstate __user *fp,
 		       struct sigcontext *from, int fpsize, unsigned long sp)
 {
 	struct _fpstate __user *to_fp;
@@ -167,7 +167,7 @@ static int copy_sc_from_user(struct pt_regs *to, void __user *from)
 	return(ret);
 }
 
-static int copy_sc_to_user(struct sigcontext *to, struct _fpstate __user *fp,
+static int copy_sc_to_user(struct sigcontext __user *to, struct _fpstate __user *fp,
 			   struct pt_regs *from, unsigned long sp)
 {
 	return(CHOOSE_MODE(copy_sc_to_user_tt(to, fp, UPT_SC(&from->regs),
diff --git a/arch/um/sys-i386/stub_segv.c b/arch/um/sys-i386/stub_segv.c
index a37f672ec964..2355dc19c46c 100644
--- a/arch/um/sys-i386/stub_segv.c
+++ b/arch/um/sys-i386/stub_segv.c
@@ -27,6 +27,6 @@ stub_segv_handler(int sig)
 	 * the stack in its original form when we do the sigreturn here, by
 	 * hand.
 	 */
-	__asm__("mov %0,%%esp ; movl %1, %%eax ; "
-		"int $0x80" : : "a" (sc), "g" (__NR_sigreturn));
+	__asm__ __volatile__("mov %0,%%esp ; movl %1, %%eax ; "
+			     "int $0x80" : : "a" (sc), "g" (__NR_sigreturn));
 }
diff --git a/arch/um/sys-i386/syscalls.c b/arch/um/sys-i386/syscalls.c
index 749dd1bfe60f..710d5fb807e1 100644
--- a/arch/um/sys-i386/syscalls.c
+++ b/arch/um/sys-i386/syscalls.c
@@ -99,11 +99,12 @@ long sys_ipc (uint call, int first, int second,
 
 	switch (call) {
 	case SEMOP:
-		return sys_semtimedop(first, (struct sembuf *) ptr, second,
-				      NULL);
+		return sys_semtimedop(first, (struct sembuf __user *) ptr,
+				      second, NULL);
 	case SEMTIMEDOP:
-		return sys_semtimedop(first, (struct sembuf *) ptr, second,
-				      (const struct timespec *) fifth);
+		return sys_semtimedop(first, (struct sembuf __user *) ptr,
+				      second,
+				      (const struct timespec __user *) fifth);
 	case SEMGET:
 		return sys_semget (first, second, third);
 	case SEMCTL: {
diff --git a/arch/um/sys-x86_64/Makefile b/arch/um/sys-x86_64/Makefile
index b5fc22babddf..c19794d435d6 100644
--- a/arch/um/sys-x86_64/Makefile
+++ b/arch/um/sys-x86_64/Makefile
@@ -16,11 +16,16 @@ subarch-obj-$(CONFIG_MODULES) += kernel/module.o
 
 ldt-y = ../sys-i386/ldt.o
 
-USER_OBJS := ptrace_user.o sigcontext.o stub_segv.o
+USER_OBJS := ptrace_user.o sigcontext.o
 
-include arch/um/scripts/Makefile.rules
+USER_OBJS += user-offsets.s
+extra-y += user-offsets.s
 
 extra-$(CONFIG_MODE_TT) += unmap.o
 
-$(obj)/stub_segv.o $(obj)/unmap.o: \
-	_c_flags = $(call unprofile,$(CFLAGS))
+UNPROFILE_OBJS := stub_segv.o
+CFLAGS_stub_segv.o := $(CFLAGS_NO_HARDENING)
+
+include arch/um/scripts/Makefile.rules
+
+$(obj)/unmap.%: _c_flags = $(call unprofile,$(CFLAGS))
diff --git a/arch/um/sys-x86_64/signal.c b/arch/um/sys-x86_64/signal.c
index a4c46a8af008..9edf114faf79 100644
--- a/arch/um/sys-x86_64/signal.c
+++ b/arch/um/sys-x86_64/signal.c
@@ -21,7 +21,7 @@
 #include "skas.h"
 
 static int copy_sc_from_user_skas(struct pt_regs *regs,
-                                 struct sigcontext *from)
+                                 struct sigcontext __user *from)
 {
        int err = 0;
 
@@ -54,7 +54,8 @@ static int copy_sc_from_user_skas(struct pt_regs *regs,
        return(err);
 }
 
-int copy_sc_to_user_skas(struct sigcontext *to, struct _fpstate *to_fp,
+int copy_sc_to_user_skas(struct sigcontext __user *to,
+			 struct _fpstate __user *to_fp,
 			 struct pt_regs *regs, unsigned long mask,
 			 unsigned long sp)
 {
@@ -106,10 +107,11 @@ int copy_sc_to_user_skas(struct sigcontext *to, struct _fpstate *to_fp,
 #endif
 
 #ifdef CONFIG_MODE_TT
-int copy_sc_from_user_tt(struct sigcontext *to, struct sigcontext *from,
+int copy_sc_from_user_tt(struct sigcontext *to, struct sigcontext __user *from,
 			 int fpsize)
 {
-	struct _fpstate *to_fp, *from_fp;
+	struct _fpstate *to_fp;
+	struct _fpstate __user *from_fp;
 	unsigned long sigs;
 	int err;
 
@@ -124,13 +126,14 @@ int copy_sc_from_user_tt(struct sigcontext *to, struct sigcontext *from,
 	return(err);
 }
 
-int copy_sc_to_user_tt(struct sigcontext *to, struct _fpstate *fp,
+int copy_sc_to_user_tt(struct sigcontext __user *to, struct _fpstate __user *fp,
 		       struct sigcontext *from, int fpsize, unsigned long sp)
 {
-	struct _fpstate *to_fp, *from_fp;
+	struct _fpstate __user *to_fp;
+	struct _fpstate *from_fp;
 	int err;
 
-	to_fp = (fp ? fp : (struct _fpstate *) (to + 1));
+	to_fp = (fp ? fp : (struct _fpstate __user *) (to + 1));
 	from_fp = from->fpstate;
 	err = copy_to_user(to, from, sizeof(*to));
 	/* The SP in the sigcontext is the updated one for the signal
@@ -158,7 +161,8 @@ static int copy_sc_from_user(struct pt_regs *to, void __user *from)
        return(ret);
 }
 
-static int copy_sc_to_user(struct sigcontext *to, struct _fpstate *fp,
+static int copy_sc_to_user(struct sigcontext __user *to,
+			   struct _fpstate __user *fp,
 			   struct pt_regs *from, unsigned long mask,
 			   unsigned long sp)
 {
@@ -169,7 +173,7 @@ static int copy_sc_to_user(struct sigcontext *to, struct _fpstate *fp,
 
 struct rt_sigframe
 {
-       char *pretcode;
+       char __user *pretcode;
        struct ucontext uc;
        struct siginfo info;
 };
@@ -188,7 +192,7 @@ int setup_signal_stack_si(unsigned long stack_top, int sig,
 
 	frame = (struct rt_sigframe __user *)
 		round_down(stack_top - sizeof(struct rt_sigframe), 16) - 8;
-        frame = (struct rt_sigframe *) ((unsigned long) frame - 128);
+        frame = (struct rt_sigframe __user *) ((unsigned long) frame - 128);
 
 	if (!access_ok(VERIFY_WRITE, fp, sizeof(struct _fpstate)))
 		goto out;
diff --git a/arch/um/sys-x86_64/stub_segv.c b/arch/um/sys-x86_64/stub_segv.c
index a27099533198..1c967026c957 100644
--- a/arch/um/sys-x86_64/stub_segv.c
+++ b/arch/um/sys-x86_64/stub_segv.c
@@ -33,7 +33,7 @@ stub_segv_handler(int sig)
 	struct ucontext *uc;
         int pid;
 
-	__asm__("movq %%rdx, %0" : "=g" (uc) :);
+	__asm__ __volatile__("movq %%rdx, %0" : "=g" (uc) :);
 	GET_FAULTINFO_FROM_SC(*((struct faultinfo *) UML_CONFIG_STUB_DATA),
 			      &uc->uc_mcontext);
 
@@ -44,8 +44,8 @@ stub_segv_handler(int sig)
 	 * the signal frame.  So, we use the ucontext pointer, which we know
 	 * already, to get the signal frame pointer, and add 8 to that.
 	 */
-	__asm__("movq %0, %%rsp; movq %1, %%rax ; syscall": :
-		"g" ((unsigned long) container_of(uc, struct rt_sigframe, 
-						  uc) + 8),
-                "g" (__NR_rt_sigreturn));
+	__asm__ __volatile__("movq %0, %%rsp; movq %1, %%rax ; syscall": :
+                             "g" ((unsigned long)
+                                  container_of(uc, struct rt_sigframe, uc) + 8),
+                             "g" (__NR_rt_sigreturn));
 }
diff --git a/arch/um/sys-x86_64/syscalls.c b/arch/um/sys-x86_64/syscalls.c
index 6acee5c4ada6..6fce9f45dfdc 100644
--- a/arch/um/sys-x86_64/syscalls.c
+++ b/arch/um/sys-x86_64/syscalls.c
@@ -45,7 +45,7 @@ static long arch_prctl_tt(int code, unsigned long addr)
 	case ARCH_GET_GS:
 		ret = arch_prctl(code, (unsigned long) &tmp);
 		if(!ret)
-			ret = put_user(tmp, &addr);
+			ret = put_user(tmp, (long __user *)addr);
 		break;
 	default:
 		ret = -EINVAL;
diff --git a/arch/x86_64/defconfig b/arch/x86_64/defconfig
index 3c45ec22b3fe..69db0c0721d1 100644
--- a/arch/x86_64/defconfig
+++ b/arch/x86_64/defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc1
-# Mon Apr  3 16:11:14 2006
+# Linux kernel version: 2.6.17-rc1-git11
+# Sun Apr 16 07:22:36 2006
 #
 CONFIG_X86_64=y
 CONFIG_64BIT=y
@@ -57,6 +57,7 @@ CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
+CONFIG_DOUBLEFAULT=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -121,6 +122,7 @@ CONFIG_PREEMPT_VOLUNTARY=y
 CONFIG_PREEMPT_BKL=y
 CONFIG_NUMA=y
 CONFIG_K8_NUMA=y
+CONFIG_NODES_SHIFT=6
 CONFIG_X86_64_ACPI_NUMA=y
 CONFIG_NUMA_EMU=y
 CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
@@ -544,7 +546,6 @@ CONFIG_SCSI_SATA_INTEL_COMBINED=y
 # CONFIG_SCSI_INIA100 is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
 # CONFIG_SCSI_QLA_FC is not set
 # CONFIG_SCSI_LPFC is not set
@@ -1045,9 +1046,7 @@ CONFIG_USB_HIDINPUT=y
 # CONFIG_USB_ACECAD is not set
 # CONFIG_USB_KBTAB is not set
 # CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_TOUCHSCREEN is not set
 # CONFIG_USB_YEALINK is not set
 # CONFIG_USB_XPAD is not set
 # CONFIG_USB_ATI_REMOTE is not set
@@ -1118,6 +1117,14 @@ CONFIG_USB_MON=y
 # CONFIG_NEW_LEDS is not set
 
 #
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
 # InfiniBand support
 #
 # CONFIG_INFINIBAND is not set
diff --git a/arch/x86_64/ia32/Makefile b/arch/x86_64/ia32/Makefile
index 929e6b0771f8..e9263b4975e0 100644
--- a/arch/x86_64/ia32/Makefile
+++ b/arch/x86_64/ia32/Makefile
@@ -27,5 +27,5 @@ $(obj)/vsyscall-sysenter.so $(obj)/vsyscall-syscall.so: \
 $(obj)/vsyscall-%.so: $(src)/vsyscall.lds $(obj)/vsyscall-%.o FORCE
 	$(call if_changed,syscall)
 
-AFLAGS_vsyscall-sysenter.o = -m32
-AFLAGS_vsyscall-syscall.o = -m32
+AFLAGS_vsyscall-sysenter.o = -m32 -Wa,-32
+AFLAGS_vsyscall-syscall.o = -m32 -Wa,-32
diff --git a/arch/x86_64/ia32/ia32_binfmt.c b/arch/x86_64/ia32/ia32_binfmt.c
index e776139afb20..926c4743d13b 100644
--- a/arch/x86_64/ia32/ia32_binfmt.c
+++ b/arch/x86_64/ia32/ia32_binfmt.c
@@ -339,7 +339,7 @@ int ia32_setup_arg_pages(struct linux_binprm *bprm, unsigned long stack_top,
 	struct mm_struct *mm = current->mm;
 	int i, ret;
 
-	stack_base = IA32_STACK_TOP - MAX_ARG_PAGES * PAGE_SIZE;
+	stack_base = stack_top - MAX_ARG_PAGES * PAGE_SIZE;
 	mm->arg_start = bprm->p + stack_base;
 
 	bprm->p += stack_base;
@@ -357,7 +357,7 @@ int ia32_setup_arg_pages(struct linux_binprm *bprm, unsigned long stack_top,
 	{
 		mpnt->vm_mm = mm;
 		mpnt->vm_start = PAGE_MASK & (unsigned long) bprm->p;
-		mpnt->vm_end = IA32_STACK_TOP;
+		mpnt->vm_end = stack_top;
 		if (executable_stack == EXSTACK_ENABLE_X)
 			mpnt->vm_flags = VM_STACK_FLAGS |  VM_EXEC;
 		else if (executable_stack == EXSTACK_DISABLE_X)
diff --git a/arch/x86_64/ia32/ia32entry.S b/arch/x86_64/ia32/ia32entry.S
index 5a9802676689..5a92fed2d1d5 100644
--- a/arch/x86_64/ia32/ia32entry.S
+++ b/arch/x86_64/ia32/ia32entry.S
@@ -694,4 +694,6 @@ ia32_sys_call_table:
 	.quad compat_sys_get_robust_list
 	.quad sys_splice
 	.quad sys_sync_file_range
+	.quad sys_tee
+	.quad compat_sys_vmsplice
 ia32_syscall_end:		
diff --git a/arch/x86_64/kernel/Makefile b/arch/x86_64/kernel/Makefile
index a098a11e7755..059c88313f4e 100644
--- a/arch/x86_64/kernel/Makefile
+++ b/arch/x86_64/kernel/Makefile
@@ -8,7 +8,7 @@ obj-y	:= process.o signal.o entry.o traps.o irq.o \
 		ptrace.o time.o ioport.o ldt.o setup.o i8259.o sys_x86_64.o \
 		x8664_ksyms.o i387.o syscall.o vsyscall.o \
 		setup64.o bootflag.o e820.o reboot.o quirks.o i8237.o \
-		dmi_scan.o pci-dma.o pci-nommu.o
+		pci-dma.o pci-nommu.o
 
 obj-$(CONFIG_X86_MCE)         += mce.o
 obj-$(CONFIG_X86_MCE_INTEL)	+= mce_intel.o
@@ -49,5 +49,3 @@ intel_cacheinfo-y		+= ../../i386/kernel/cpu/intel_cacheinfo.o
 quirks-y			+= ../../i386/kernel/quirks.o
 i8237-y				+= ../../i386/kernel/i8237.o
 msr-$(subst m,y,$(CONFIG_X86_MSR))  += ../../i386/kernel/msr.o
-dmi_scan-y			+= ../../i386/kernel/dmi_scan.o
-
diff --git a/arch/x86_64/kernel/e820.c b/arch/x86_64/kernel/e820.c
index 62776c07cff1..1ef6028f721e 100644
--- a/arch/x86_64/kernel/e820.c
+++ b/arch/x86_64/kernel/e820.c
@@ -76,6 +76,12 @@ static inline int bad_addr(unsigned long *addrp, unsigned long size)
 		*addrp = __pa_symbol(&_end);
 		return 1;
 	}
+
+	if (last >= ebda_addr && addr < ebda_addr + ebda_size) {
+		*addrp = ebda_addr + ebda_size;
+		return 1;
+	}
+
 	/* XXX ramdisk image here? */ 
 	return 0;
 } 
@@ -143,7 +149,7 @@ unsigned long __init find_e820_area(unsigned long start, unsigned long end, unsi
 			addr = start;
 		if (addr > ei->addr + ei->size) 
 			continue; 
-		while (bad_addr(&addr, size) && addr+size < ei->addr + ei->size)
+		while (bad_addr(&addr, size) && addr+size <= ei->addr+ei->size)
 			;
 		last = addr + size;
 		if (last > ei->addr + ei->size)
diff --git a/arch/x86_64/kernel/entry.S b/arch/x86_64/kernel/entry.S
index c946e4fe67a7..586b34c00c48 100644
--- a/arch/x86_64/kernel/entry.S
+++ b/arch/x86_64/kernel/entry.S
@@ -281,12 +281,7 @@ tracesys:
 	ja  1f
 	movq %r10,%rcx	/* fixup for C */
 	call *sys_call_table(,%rax,8)
-	movq %rax,RAX-ARGOFFSET(%rsp)
-1:	SAVE_REST
-	movq %rsp,%rdi
-	call syscall_trace_leave
-	RESTORE_TOP_OF_STACK %rbx
-	RESTORE_REST
+1:	movq %rax,RAX-ARGOFFSET(%rsp)
 	/* Use IRET because user could have changed frame */
 	jmp int_ret_from_sys_call
 	CFI_ENDPROC
diff --git a/arch/x86_64/kernel/io_apic.c b/arch/x86_64/kernel/io_apic.c
index 77b4c608cca0..9cc7031b7151 100644
--- a/arch/x86_64/kernel/io_apic.c
+++ b/arch/x86_64/kernel/io_apic.c
@@ -271,6 +271,18 @@ __setup("enable_8254_timer", setup_enable_8254_timer);
 #include <linux/pci_ids.h>
 #include <linux/pci.h>
 
+
+#ifdef CONFIG_ACPI
+
+static int nvidia_hpet_detected __initdata;
+
+static int __init nvidia_hpet_check(unsigned long phys, unsigned long size)
+{
+	nvidia_hpet_detected = 1;
+	return 0;
+}
+#endif
+
 /* Temporary Hack. Nvidia and VIA boards currently only work with IO-APIC
    off. Check for an Nvidia or VIA PCI bridge and turn it off.
    Use pci direct infrastructure because this runs before the PCI subsystem. 
@@ -317,11 +329,19 @@ void __init check_ioapic(void)
 					return;
 				case PCI_VENDOR_ID_NVIDIA:
 #ifdef CONFIG_ACPI
-					/* All timer overrides on Nvidia
-				           seem to be wrong. Skip them. */
-					acpi_skip_timer_override = 1;
-					printk(KERN_INFO 
-	     "Nvidia board detected. Ignoring ACPI timer override.\n");
+					/*
+					 * All timer overrides on Nvidia are
+					 * wrong unless HPET is enabled.
+					 */
+					nvidia_hpet_detected = 0;
+					acpi_table_parse(ACPI_HPET,
+							nvidia_hpet_check);
+					if (nvidia_hpet_detected == 0) {
+						acpi_skip_timer_override = 1;
+						printk(KERN_INFO "Nvidia board "
+						    "detected. Ignoring ACPI "
+						    "timer override.\n");
+					}
 #endif
 					/* RED-PEN skip them on mptables too? */
 					return;
@@ -1777,6 +1797,8 @@ static inline void unlock_ExtINT_logic(void)
 	spin_unlock_irqrestore(&ioapic_lock, flags);
 }
 
+int timer_uses_ioapic_pin_0;
+
 /*
  * This code may look a bit paranoid, but it's supposed to cooperate with
  * a wide range of boards and BIOS bugs.  Fortunately only the timer IRQ
@@ -1814,6 +1836,9 @@ static inline void check_timer(void)
 	pin2  = ioapic_i8259.pin;
 	apic2 = ioapic_i8259.apic;
 
+	if (pin1 == 0)
+		timer_uses_ioapic_pin_0 = 1;
+
 	apic_printk(APIC_VERBOSE,KERN_INFO "..TIMER: vector=0x%02X apic1=%d pin1=%d apic2=%d pin2=%d\n",
 		vector, apic1, pin1, apic2, pin2);
 
diff --git a/arch/x86_64/kernel/kprobes.c b/arch/x86_64/kernel/kprobes.c
index accbff3fec49..fa1d19ca700a 100644
--- a/arch/x86_64/kernel/kprobes.c
+++ b/arch/x86_64/kernel/kprobes.c
@@ -53,7 +53,7 @@ DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk);
 /*
  * returns non-zero if opcode modifies the interrupt flag.
  */
-static inline int is_IF_modifier(kprobe_opcode_t *insn)
+static __always_inline int is_IF_modifier(kprobe_opcode_t *insn)
 {
 	switch (*insn) {
 	case 0xfa:		/* cli */
@@ -84,7 +84,7 @@ int __kprobes arch_prepare_kprobe(struct kprobe *p)
  * If it does, return the address of the 32-bit displacement word.
  * If not, return null.
  */
-static inline s32 *is_riprel(u8 *insn)
+static s32 __kprobes *is_riprel(u8 *insn)
 {
 #define W(row,b0,b1,b2,b3,b4,b5,b6,b7,b8,b9,ba,bb,bc,bd,be,bf)		      \
 	(((b0##UL << 0x0)|(b1##UL << 0x1)|(b2##UL << 0x2)|(b3##UL << 0x3) |   \
@@ -229,7 +229,7 @@ void __kprobes arch_remove_kprobe(struct kprobe *p)
 	mutex_unlock(&kprobe_mutex);
 }
 
-static inline void save_previous_kprobe(struct kprobe_ctlblk *kcb)
+static void __kprobes save_previous_kprobe(struct kprobe_ctlblk *kcb)
 {
 	kcb->prev_kprobe.kp = kprobe_running();
 	kcb->prev_kprobe.status = kcb->kprobe_status;
@@ -237,7 +237,7 @@ static inline void save_previous_kprobe(struct kprobe_ctlblk *kcb)
 	kcb->prev_kprobe.saved_rflags = kcb->kprobe_saved_rflags;
 }
 
-static inline void restore_previous_kprobe(struct kprobe_ctlblk *kcb)
+static void __kprobes restore_previous_kprobe(struct kprobe_ctlblk *kcb)
 {
 	__get_cpu_var(current_kprobe) = kcb->prev_kprobe.kp;
 	kcb->kprobe_status = kcb->prev_kprobe.status;
@@ -245,7 +245,7 @@ static inline void restore_previous_kprobe(struct kprobe_ctlblk *kcb)
 	kcb->kprobe_saved_rflags = kcb->prev_kprobe.saved_rflags;
 }
 
-static inline void set_current_kprobe(struct kprobe *p, struct pt_regs *regs,
+static void __kprobes set_current_kprobe(struct kprobe *p, struct pt_regs *regs,
 				struct kprobe_ctlblk *kcb)
 {
 	__get_cpu_var(current_kprobe) = p;
@@ -514,13 +514,13 @@ static void __kprobes resume_execution(struct kprobe *p,
 		*tos = orig_rip + (*tos - copy_rip);
 		break;
 	case 0xff:
-		if ((*insn & 0x30) == 0x10) {
+		if ((insn[1] & 0x30) == 0x10) {
 			/* call absolute, indirect */
 			/* Fix return addr; rip is correct. */
 			next_rip = regs->rip;
 			*tos = orig_rip + (*tos - copy_rip);
-		} else if (((*insn & 0x31) == 0x20) ||	/* jmp near, absolute indirect */
-			   ((*insn & 0x31) == 0x21)) {	/* jmp far, absolute indirect */
+		} else if (((insn[1] & 0x31) == 0x20) ||	/* jmp near, absolute indirect */
+			   ((insn[1] & 0x31) == 0x21)) {	/* jmp far, absolute indirect */
 			/* rip is correct. */
 			next_rip = regs->rip;
 		}
diff --git a/arch/x86_64/kernel/mce.c b/arch/x86_64/kernel/mce.c
index 6f0790e8b6d3..c69fc43cee7b 100644
--- a/arch/x86_64/kernel/mce.c
+++ b/arch/x86_64/kernel/mce.c
@@ -629,7 +629,7 @@ static __cpuinit void mce_remove_device(unsigned int cpu)
 #endif
 
 /* Get notified when a cpu comes on/off. Be hotplug friendly. */
-static __cpuinit int
+static int
 mce_cpu_callback(struct notifier_block *nfb, unsigned long action, void *hcpu)
 {
 	unsigned int cpu = (unsigned long)hcpu;
diff --git a/arch/x86_64/kernel/mce_amd.c b/arch/x86_64/kernel/mce_amd.c
index d3ad7d81266d..d13b241ad094 100644
--- a/arch/x86_64/kernel/mce_amd.c
+++ b/arch/x86_64/kernel/mce_amd.c
@@ -482,7 +482,7 @@ static void threshold_remove_device(unsigned int cpu)
 #endif
 
 /* get notified when a cpu comes on/off */
-static __cpuinit int threshold_cpu_callback(struct notifier_block *nfb,
+static int threshold_cpu_callback(struct notifier_block *nfb,
 					    unsigned long action, void *hcpu)
 {
 	/* cpu was unsigned int to begin with */
diff --git a/arch/x86_64/kernel/mpparse.c b/arch/x86_64/kernel/mpparse.c
index b17cf3eba359..083da7e606b1 100644
--- a/arch/x86_64/kernel/mpparse.c
+++ b/arch/x86_64/kernel/mpparse.c
@@ -968,7 +968,17 @@ int mp_register_gsi(u32 gsi, int triggering, int polarity)
 		 */
 		int irq = gsi;
 		if (gsi < MAX_GSI_NUM) {
-			if (gsi > 15)
+			/*
+			 * Retain the VIA chipset work-around (gsi > 15), but
+			 * avoid a problem where the 8254 timer (IRQ0) is setup
+			 * via an override (so it's not on pin 0 of the ioapic),
+			 * and at the same time, the pin 0 interrupt is a PCI
+			 * type.  The gsi > 15 test could cause these two pins
+			 * to be shared as IRQ0, and they are not shareable.
+			 * So test for this condition, and if necessary, avoid
+			 * the pin collision.
+			 */
+			if (gsi > 15 || (gsi == 0 && !timer_uses_ioapic_pin_0))
 				gsi = pci_irq++;
 			/*
 			 * Don't assign IRQ used by ACPI SCI
diff --git a/arch/x86_64/kernel/pci-dma.c b/arch/x86_64/kernel/pci-dma.c
index af035ede70cd..a9275c9557cf 100644
--- a/arch/x86_64/kernel/pci-dma.c
+++ b/arch/x86_64/kernel/pci-dma.c
@@ -54,6 +54,10 @@ dma_alloc_pages(struct device *dev, gfp_t gfp, unsigned order)
 	else
 #endif
 		node = numa_node_id();
+
+	if (node < first_node(node_online_map))
+		node = first_node(node_online_map);
+
 	page = alloc_pages_node(node, gfp, order);
 	return page ? page_address(page) : NULL;
 }
diff --git a/arch/x86_64/kernel/pci-gart.c b/arch/x86_64/kernel/pci-gart.c
index a6c01e121266..82a7c9bfdfa0 100644
--- a/arch/x86_64/kernel/pci-gart.c
+++ b/arch/x86_64/kernel/pci-gart.c
@@ -112,10 +112,6 @@ static unsigned long alloc_iommu(int size)
 static void free_iommu(unsigned long offset, int size)
 { 
 	unsigned long flags;
-	if (size == 1) { 
-		clear_bit(offset, iommu_gart_bitmap); 
-		return;
-	}
 	spin_lock_irqsave(&iommu_bitmap_lock, flags);
 	__clear_bit_string(iommu_gart_bitmap, offset, size);
 	spin_unlock_irqrestore(&iommu_bitmap_lock, flags);
@@ -635,14 +631,20 @@ static int __init pci_iommu_init(void)
 		printk(KERN_INFO "PCI-DMA: Disabling IOMMU.\n");
 		if (end_pfn > MAX_DMA32_PFN) {
 			printk(KERN_ERR "WARNING more than 4GB of memory "
-					"but IOMMU not compiled in.\n"
-			       KERN_ERR "WARNING 32bit PCI may malfunction.\n"
-			       KERN_ERR "You might want to enable "
-					"CONFIG_GART_IOMMU\n");
+					"but IOMMU not available.\n"
+			       KERN_ERR "WARNING 32bit PCI may malfunction.\n");
 		}
 		return -1;
 	}
 
+	i = 0;
+	for_all_nb(dev)
+		i++;
+	if (i > MAX_NB) {
+		printk(KERN_ERR "PCI-GART: Too many northbridges (%ld). Disabled\n", i);
+		return -1;
+	}
+
 	printk(KERN_INFO "PCI-DMA: using GART IOMMU.\n");
 	aper_size = info.aper_size * 1024 * 1024;	
 	iommu_size = check_iommu_size(info.aper_base, aper_size); 
diff --git a/arch/x86_64/kernel/pci-nommu.c b/arch/x86_64/kernel/pci-nommu.c
index 44adcc2d5e5b..1f6ecc62061d 100644
--- a/arch/x86_64/kernel/pci-nommu.c
+++ b/arch/x86_64/kernel/pci-nommu.c
@@ -12,9 +12,10 @@ static int
 check_addr(char *name, struct device *hwdev, dma_addr_t bus, size_t size)
 {
         if (hwdev && bus + size > *hwdev->dma_mask) {
-		printk(KERN_ERR
-		    "nommu_%s: overflow %Lx+%lu of device mask %Lx\n",
-	       name, (long long)bus, size, (long long)*hwdev->dma_mask);
+		if (*hwdev->dma_mask >= 0xffffffffULL)
+			printk(KERN_ERR
+			    "nommu_%s: overflow %Lx+%lu of device mask %Lx\n",
+	       			name, (long long)bus, size, (long long)*hwdev->dma_mask);
 		return 0;
 	}
 	return 1;
diff --git a/arch/x86_64/kernel/pmtimer.c b/arch/x86_64/kernel/pmtimer.c
index b0444a415bd6..bf421ed26808 100644
--- a/arch/x86_64/kernel/pmtimer.c
+++ b/arch/x86_64/kernel/pmtimer.c
@@ -68,7 +68,7 @@ int pmtimer_mark_offset(void)
 	offset_delay = delta % (USEC_PER_SEC / HZ);
 
 	rdtscll(tsc);
-	vxtime.last_tsc = tsc - offset_delay * cpu_khz;
+	vxtime.last_tsc = tsc - offset_delay * (u64)cpu_khz / 1000;
 
 	/* don't calculate delay for first run,
 	   or if we've got less then a tick */
diff --git a/arch/x86_64/kernel/process.c b/arch/x86_64/kernel/process.c
index 1c44b53cb15b..fb903e65e079 100644
--- a/arch/x86_64/kernel/process.c
+++ b/arch/x86_64/kernel/process.c
@@ -575,8 +575,10 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 	prev->userrsp = read_pda(oldrsp); 
 	write_pda(oldrsp, next->userrsp); 
 	write_pda(pcurrent, next_p); 
+
 	/* This must be here to ensure both math_state_restore() and
-	   kernel_fpu_begin() work consistently. */
+	   kernel_fpu_begin() work consistently. 
+	   And the AMD workaround requires it to be after DS reload. */
 	unlazy_fpu(prev_p);
 	write_pda(kernelstack,
 		  task_stack_page(next_p) + THREAD_SIZE - PDA_STACKOFFSET);
diff --git a/arch/x86_64/kernel/ptrace.c b/arch/x86_64/kernel/ptrace.c
index da8e7903d817..2d50024c9f30 100644
--- a/arch/x86_64/kernel/ptrace.c
+++ b/arch/x86_64/kernel/ptrace.c
@@ -600,12 +600,12 @@ asmlinkage void syscall_trace_enter(struct pt_regs *regs)
 
 	if (unlikely(current->audit_context)) {
 		if (test_thread_flag(TIF_IA32)) {
-			audit_syscall_entry(current, AUDIT_ARCH_I386,
+			audit_syscall_entry(AUDIT_ARCH_I386,
 					    regs->orig_rax,
 					    regs->rbx, regs->rcx,
 					    regs->rdx, regs->rsi);
 		} else {
-			audit_syscall_entry(current, AUDIT_ARCH_X86_64,
+			audit_syscall_entry(AUDIT_ARCH_X86_64,
 					    regs->orig_rax,
 					    regs->rdi, regs->rsi,
 					    regs->rdx, regs->r10);
@@ -616,7 +616,7 @@ asmlinkage void syscall_trace_enter(struct pt_regs *regs)
 asmlinkage void syscall_trace_leave(struct pt_regs *regs)
 {
 	if (unlikely(current->audit_context))
-		audit_syscall_exit(current, AUDITSC_RESULT(regs->rax), regs->rax);
+		audit_syscall_exit(AUDITSC_RESULT(regs->rax), regs->rax);
 
 	if ((test_thread_flag(TIF_SYSCALL_TRACE)
 	     || test_thread_flag(TIF_SINGLESTEP))
diff --git a/arch/x86_64/kernel/setup.c b/arch/x86_64/kernel/setup.c
index c50b06765a80..655b9192eeb3 100644
--- a/arch/x86_64/kernel/setup.c
+++ b/arch/x86_64/kernel/setup.c
@@ -571,17 +571,28 @@ static inline void copy_edd(void)
 #endif
 
 #define EBDA_ADDR_POINTER 0x40E
-static void __init reserve_ebda_region(void)
+
+unsigned __initdata ebda_addr;
+unsigned __initdata ebda_size;
+
+static void discover_ebda(void)
 {
-	unsigned int addr;
-	/** 
+	/*
 	 * there is a real-mode segmented pointer pointing to the 
 	 * 4K EBDA area at 0x40E
 	 */
-	addr = *(unsigned short *)phys_to_virt(EBDA_ADDR_POINTER);
-	addr <<= 4;
-	if (addr)
-		reserve_bootmem_generic(addr, PAGE_SIZE);
+	ebda_addr = *(unsigned short *)EBDA_ADDR_POINTER;
+	ebda_addr <<= 4;
+
+	ebda_size = *(unsigned short *)(unsigned long)ebda_addr;
+
+	/* Round EBDA up to pages */
+	if (ebda_size == 0)
+		ebda_size = 1;
+	ebda_size <<= 10;
+	ebda_size = round_up(ebda_size + (ebda_addr & ~PAGE_MASK), PAGE_SIZE);
+	if (ebda_size > 64*1024)
+		ebda_size = 64*1024;
 }
 
 void __init setup_arch(char **cmdline_p)
@@ -627,6 +638,8 @@ void __init setup_arch(char **cmdline_p)
 
 	check_efer();
 
+	discover_ebda();
+
 	init_memory_mapping(0, (end_pfn_map << PAGE_SHIFT));
 
 	dmi_scan_machine();
@@ -669,7 +682,8 @@ void __init setup_arch(char **cmdline_p)
 	reserve_bootmem_generic(0, PAGE_SIZE);
 
 	/* reserve ebda region */
-	reserve_ebda_region();
+	if (ebda_addr)
+		reserve_bootmem_generic(ebda_addr, ebda_size);
 
 #ifdef CONFIG_SMP
 	/*
@@ -930,6 +944,10 @@ static int __init init_amd(struct cpuinfo_x86 *c)
 	if (c->x86 == 15 && ((level >= 0x0f48 && level < 0x0f50) || level >= 0x0f58))
 		set_bit(X86_FEATURE_REP_GOOD, &c->x86_capability);
 
+	/* Enable workaround for FXSAVE leak */
+	if (c->x86 >= 6)
+		set_bit(X86_FEATURE_FXSAVE_LEAK, &c->x86_capability);
+
 	r = get_model_name(c);
 	if (!r) { 
 		switch (c->x86) { 
@@ -1033,7 +1051,7 @@ static void srat_detect_node(void)
 	   for now. */
 	node = apicid_to_node[hard_smp_processor_id()];
 	if (node == NUMA_NO_NODE)
-		node = 0;
+		node = first_node(node_online_map);
 	numa_set_node(cpu, node);
 
 	if (acpi_numa > 0)
@@ -1422,3 +1440,22 @@ struct seq_operations cpuinfo_op = {
 	.show =	show_cpuinfo,
 };
 
+#ifdef CONFIG_INPUT_PCSPKR
+#include <linux/platform_device.h>
+static __init int add_pcspkr(void)
+{
+	struct platform_device *pd;
+	int ret;
+
+	pd = platform_device_alloc("pcspkr", -1);
+	if (!pd)
+		return -ENOMEM;
+
+	ret = platform_device_add(pd);
+	if (ret)
+		platform_device_put(pd);
+
+	return ret;
+}
+device_initcall(add_pcspkr);
+#endif
diff --git a/arch/x86_64/kernel/traps.c b/arch/x86_64/kernel/traps.c
index 6bda322d3caf..cea335e8746c 100644
--- a/arch/x86_64/kernel/traps.c
+++ b/arch/x86_64/kernel/traps.c
@@ -30,6 +30,7 @@
 #include <linux/moduleparam.h>
 #include <linux/nmi.h>
 #include <linux/kprobes.h>
+#include <linux/kexec.h>
 
 #include <asm/system.h>
 #include <asm/uaccess.h>
@@ -101,6 +102,8 @@ static inline void preempt_conditional_cli(struct pt_regs *regs)
 {
 	if (regs->eflags & X86_EFLAGS_IF)
 		local_irq_disable();
+	/* Make sure to not schedule here because we could be running
+	   on an exception stack. */
 	preempt_enable_no_resched();
 }
 
@@ -384,6 +387,7 @@ void out_of_line_bug(void)
 
 static DEFINE_SPINLOCK(die_lock);
 static int die_owner = -1;
+static unsigned int die_nest_count;
 
 unsigned __kprobes long oops_begin(void)
 {
@@ -398,6 +402,7 @@ unsigned __kprobes long oops_begin(void)
 		else
 			spin_lock(&die_lock);
 	}
+	die_nest_count++;
 	die_owner = cpu;
 	console_verbose();
 	bust_spinlocks(1);
@@ -408,7 +413,13 @@ void __kprobes oops_end(unsigned long flags)
 { 
 	die_owner = -1;
 	bust_spinlocks(0);
-	spin_unlock_irqrestore(&die_lock, flags);
+	die_nest_count--;
+	if (die_nest_count)
+		/* We still own the lock */
+		local_irq_restore(flags);
+	else
+		/* Nest count reaches zero, release the lock. */
+		spin_unlock_irqrestore(&die_lock, flags);
 	if (panic_on_oops)
 		panic("Oops");
 }
@@ -433,6 +444,8 @@ void __kprobes __die(const char * str, struct pt_regs * regs, long err)
 	printk(KERN_ALERT "RIP ");
 	printk_address(regs->rip); 
 	printk(" RSP <%016lx>\n", regs->rsp); 
+	if (kexec_should_crash(current))
+		crash_kexec(regs);
 }
 
 void die(const char * str, struct pt_regs * regs, long err)
@@ -455,10 +468,14 @@ void __kprobes die_nmi(char *str, struct pt_regs *regs)
 	 */
 	printk(str, safe_smp_processor_id());
 	show_registers(regs);
+	if (kexec_should_crash(current))
+		crash_kexec(regs);
 	if (panic_on_timeout || panic_on_oops)
 		panic("nmi watchdog");
 	printk("console shuts up ...\n");
 	oops_end(flags);
+	nmi_exit();
+	local_irq_enable();
 	do_exit(SIGSEGV);
 }
 
@@ -468,8 +485,6 @@ static void __kprobes do_trap(int trapnr, int signr, char *str,
 {
 	struct task_struct *tsk = current;
 
-	conditional_sti(regs);
-
 	tsk->thread.error_code = error_code;
 	tsk->thread.trap_no = trapnr;
 
@@ -506,6 +521,7 @@ asmlinkage void do_##name(struct pt_regs * regs, long error_code) \
 	if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr) \
 							== NOTIFY_STOP) \
 		return; \
+	conditional_sti(regs);						\
 	do_trap(trapnr, signr, str, regs, error_code, NULL); \
 }
 
@@ -520,6 +536,7 @@ asmlinkage void do_##name(struct pt_regs * regs, long error_code) \
 	if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr) \
 							== NOTIFY_STOP) \
 		return; \
+	conditional_sti(regs);						\
 	do_trap(trapnr, signr, str, regs, error_code, &info); \
 }
 
@@ -533,7 +550,17 @@ DO_ERROR(10, SIGSEGV, "invalid TSS", invalid_TSS)
 DO_ERROR(11, SIGBUS,  "segment not present", segment_not_present)
 DO_ERROR_INFO(17, SIGBUS, "alignment check", alignment_check, BUS_ADRALN, 0)
 DO_ERROR(18, SIGSEGV, "reserved", reserved)
-DO_ERROR(12, SIGBUS,  "stack segment", stack_segment)
+
+/* Runs on IST stack */
+asmlinkage void do_stack_segment(struct pt_regs *regs, long error_code)
+{
+	if (notify_die(DIE_TRAP, "stack segment", regs, error_code,
+			12, SIGBUS) == NOTIFY_STOP)
+		return;
+	preempt_conditional_sti(regs);
+	do_trap(12, SIGBUS, "stack segment", regs, error_code, NULL);
+	preempt_conditional_cli(regs);
+}
 
 asmlinkage void do_double_fault(struct pt_regs * regs, long error_code)
 {
@@ -667,8 +694,9 @@ asmlinkage void __kprobes do_int3(struct pt_regs * regs, long error_code)
 	if (notify_die(DIE_INT3, "int3", regs, error_code, 3, SIGTRAP) == NOTIFY_STOP) {
 		return;
 	}
+	preempt_conditional_sti(regs);
 	do_trap(3, SIGTRAP, "int3", regs, error_code, NULL);
-	return;
+	preempt_conditional_cli(regs);
 }
 
 /* Help handler running on IST stack to switch back to user stack
diff --git a/arch/x86_64/mm/numa.c b/arch/x86_64/mm/numa.c
index cc02573a3271..b2fac14baac0 100644
--- a/arch/x86_64/mm/numa.c
+++ b/arch/x86_64/mm/numa.c
@@ -188,11 +188,13 @@ void __init setup_node_zones(int nodeid)
 	   memory. */
 	memmapsize = sizeof(struct page) * (end_pfn-start_pfn);
 	limit = end_pfn << PAGE_SHIFT;
+#ifdef CONFIG_FLAT_NODE_MEM_MAP
 	NODE_DATA(nodeid)->node_mem_map = 
 		__alloc_bootmem_core(NODE_DATA(nodeid)->bdata, 
 				memmapsize, SMP_CACHE_BYTES, 
 				round_down(limit - memmapsize, PAGE_SIZE), 
 				limit);
+#endif
 
 	size_zones(zones, holes, start_pfn, end_pfn);
 	free_area_init_node(nodeid, NODE_DATA(nodeid), zones,
diff --git a/arch/x86_64/mm/srat.c b/arch/x86_64/mm/srat.c
index 15ae9fcd65a7..474df22c6ed2 100644
--- a/arch/x86_64/mm/srat.c
+++ b/arch/x86_64/mm/srat.c
@@ -34,7 +34,10 @@ static nodemask_t nodes_found __initdata;
 static struct bootnode nodes[MAX_NUMNODES] __initdata;
 static struct bootnode nodes_add[MAX_NUMNODES] __initdata;
 static int found_add_area __initdata;
-int hotadd_percent __initdata = 10;
+int hotadd_percent __initdata = 0;
+#ifndef RESERVE_HOTADD
+#define hotadd_percent 0	/* Ignore all settings */
+#endif
 static u8 pxm2node[256] = { [0 ... 255] = 0xff };
 
 /* Too small nodes confuse the VM badly. Usually they result
@@ -103,6 +106,7 @@ static __init void bad_srat(void)
 	int i;
 	printk(KERN_ERR "SRAT: SRAT not used.\n");
 	acpi_numa = -1;
+	found_add_area = 0;
 	for (i = 0; i < MAX_LOCAL_APIC; i++)
 		apicid_to_node[i] = NUMA_NO_NODE;
 	for (i = 0; i < MAX_NUMNODES; i++)
@@ -154,7 +158,8 @@ acpi_numa_processor_affinity_init(struct acpi_table_processor_affinity *pa)
 	int pxm, node;
 	if (srat_disabled())
 		return;
-	if (pa->header.length != sizeof(struct acpi_table_processor_affinity)) {		bad_srat();
+	if (pa->header.length != sizeof(struct acpi_table_processor_affinity)) {
+		bad_srat();
 		return;
 	}
 	if (pa->flags.enabled == 0)
@@ -191,15 +196,17 @@ static int hotadd_enough_memory(struct bootnode *nd)
 	allowed = (end_pfn - e820_hole_size(0, end_pfn)) * PAGE_SIZE;
 	allowed = (allowed / 100) * hotadd_percent;
 	if (allocated + mem > allowed) {
+		unsigned long range;
 		/* Give them at least part of their hotadd memory upto hotadd_percent
 		   It would be better to spread the limit out
 		   over multiple hotplug areas, but that is too complicated
 		   right now */
 		if (allocated >= allowed)
 			return 0;
-		pages = (allowed - allocated + mem) / sizeof(struct page);
+		range = allowed - allocated;
+		pages = (range / PAGE_SIZE);
 		mem = pages * sizeof(struct page);
-		nd->end = nd->start + pages*PAGE_SIZE;
+		nd->end = nd->start + range;
 	}
 	/* Not completely fool proof, but a good sanity check */
 	addr = find_e820_area(last_area_end, end_pfn<<PAGE_SHIFT, mem);
@@ -392,8 +399,10 @@ int __init acpi_scan_nodes(unsigned long start, unsigned long end)
 	/* First clean up the node list */
 	for (i = 0; i < MAX_NUMNODES; i++) {
  		cutoff_node(i, start, end);
-		if ((nodes[i].end - nodes[i].start) < NODE_MIN_SIZE)
+		if ((nodes[i].end - nodes[i].start) < NODE_MIN_SIZE) {
 			unparse_node(i);
+			node_set_offline(i);
+		}
 	}
 
 	if (acpi_numa <= 0)
diff --git a/block/as-iosched.c b/block/as-iosched.c
index 296708ceceb2..a7caf35ca0c2 100644
--- a/block/as-iosched.c
+++ b/block/as-iosched.c
@@ -1648,17 +1648,17 @@ static void as_exit_queue(elevator_t *e)
  * initialize elevator private data (as_data), and alloc a arq for
  * each request on the free lists
  */
-static int as_init_queue(request_queue_t *q, elevator_t *e)
+static void *as_init_queue(request_queue_t *q, elevator_t *e)
 {
 	struct as_data *ad;
 	int i;
 
 	if (!arq_pool)
-		return -ENOMEM;
+		return NULL;
 
 	ad = kmalloc_node(sizeof(*ad), GFP_KERNEL, q->node);
 	if (!ad)
-		return -ENOMEM;
+		return NULL;
 	memset(ad, 0, sizeof(*ad));
 
 	ad->q = q; /* Identify what queue the data belongs to */
@@ -1667,7 +1667,7 @@ static int as_init_queue(request_queue_t *q, elevator_t *e)
 				GFP_KERNEL, q->node);
 	if (!ad->hash) {
 		kfree(ad);
-		return -ENOMEM;
+		return NULL;
 	}
 
 	ad->arq_pool = mempool_create_node(BLKDEV_MIN_RQ, mempool_alloc_slab,
@@ -1675,7 +1675,7 @@ static int as_init_queue(request_queue_t *q, elevator_t *e)
 	if (!ad->arq_pool) {
 		kfree(ad->hash);
 		kfree(ad);
-		return -ENOMEM;
+		return NULL;
 	}
 
 	/* anticipatory scheduling helpers */
@@ -1696,14 +1696,13 @@ static int as_init_queue(request_queue_t *q, elevator_t *e)
 	ad->antic_expire = default_antic_expire;
 	ad->batch_expire[REQ_SYNC] = default_read_batch_expire;
 	ad->batch_expire[REQ_ASYNC] = default_write_batch_expire;
-	e->elevator_data = ad;
 
 	ad->current_batch_expires = jiffies + ad->batch_expire[REQ_SYNC];
 	ad->write_batch_count = ad->batch_expire[REQ_ASYNC] / 10;
 	if (ad->write_batch_count < 2)
 		ad->write_batch_count = 2;
 
-	return 0;
+	return ad;
 }
 
 /*
@@ -1844,9 +1843,10 @@ static void __exit as_exit(void)
 	DECLARE_COMPLETION(all_gone);
 	elv_unregister(&iosched_as);
 	ioc_gone = &all_gone;
-	barrier();
+	/* ioc_gone's update must be visible before reading ioc_count */
+	smp_wmb();
 	if (atomic_read(&ioc_count))
-		complete(ioc_gone);
+		wait_for_completion(ioc_gone);
 	synchronize_rcu();
 	kmem_cache_destroy(arq_pool);
 }
diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c
index 67d446de0227..a46d030e092a 100644
--- a/block/cfq-iosched.c
+++ b/block/cfq-iosched.c
@@ -33,7 +33,7 @@ static int cfq_slice_idle = HZ / 70;
 
 #define CFQ_KEY_ASYNC		(0)
 
-static DEFINE_RWLOCK(cfq_exit_lock);
+static DEFINE_SPINLOCK(cfq_exit_lock);
 
 /*
  * for the hash of cfqq inside the cfqd
@@ -133,6 +133,7 @@ struct cfq_data {
 	mempool_t *crq_pool;
 
 	int rq_in_driver;
+	int hw_tag;
 
 	/*
 	 * schedule slice state info
@@ -500,10 +501,13 @@ static void cfq_resort_rr_list(struct cfq_queue *cfqq, int preempted)
 
 	/*
 	 * if queue was preempted, just add to front to be fair. busy_rr
-	 * isn't sorted.
+	 * isn't sorted, but insert at the back for fairness.
 	 */
 	if (preempted || list == &cfqd->busy_rr) {
-		list_add(&cfqq->cfq_list, list);
+		if (preempted)
+			list = list->prev;
+
+		list_add_tail(&cfqq->cfq_list, list);
 		return;
 	}
 
@@ -664,6 +668,15 @@ static void cfq_activate_request(request_queue_t *q, struct request *rq)
 	struct cfq_data *cfqd = q->elevator->elevator_data;
 
 	cfqd->rq_in_driver++;
+
+	/*
+	 * If the depth is larger 1, it really could be queueing. But lets
+	 * make the mark a little higher - idling could still be good for
+	 * low queueing, and a low queueing number could also just indicate
+	 * a SCSI mid layer like behaviour where limit+1 is often seen.
+	 */
+	if (!cfqd->hw_tag && cfqd->rq_in_driver > 4)
+		cfqd->hw_tag = 1;
 }
 
 static void cfq_deactivate_request(request_queue_t *q, struct request *rq)
@@ -879,6 +892,13 @@ static struct cfq_queue *cfq_set_active_queue(struct cfq_data *cfqd)
 		cfqq = list_entry_cfqq(cfqd->cur_rr.next);
 
 	/*
+	 * If no new queues are available, check if the busy list has some
+	 * before falling back to idle io.
+	 */
+	if (!cfqq && !list_empty(&cfqd->busy_rr))
+		cfqq = list_entry_cfqq(cfqd->busy_rr.next);
+
+	/*
 	 * if we have idle queues and no rt or be queues had pending
 	 * requests, either allow immediate service if the grace period
 	 * has passed or arm the idle grace timer
@@ -1284,7 +1304,7 @@ static void cfq_exit_io_context(struct io_context *ioc)
 	/*
 	 * put the reference this task is holding to the various queues
 	 */
-	read_lock_irqsave(&cfq_exit_lock, flags);
+	spin_lock_irqsave(&cfq_exit_lock, flags);
 
 	n = rb_first(&ioc->cic_root);
 	while (n != NULL) {
@@ -1294,7 +1314,7 @@ static void cfq_exit_io_context(struct io_context *ioc)
 		n = rb_next(n);
 	}
 
-	read_unlock_irqrestore(&cfq_exit_lock, flags);
+	spin_unlock_irqrestore(&cfq_exit_lock, flags);
 }
 
 static struct cfq_io_context *
@@ -1400,17 +1420,17 @@ static int cfq_ioc_set_ioprio(struct io_context *ioc, unsigned int ioprio)
 	struct cfq_io_context *cic;
 	struct rb_node *n;
 
-	write_lock(&cfq_exit_lock);
+	spin_lock(&cfq_exit_lock);
 
 	n = rb_first(&ioc->cic_root);
 	while (n != NULL) {
 		cic = rb_entry(n, struct cfq_io_context, rb_node);
- 
+
 		changed_ioprio(cic);
 		n = rb_next(n);
 	}
 
-	write_unlock(&cfq_exit_lock);
+	spin_unlock(&cfq_exit_lock);
 
 	return 0;
 }
@@ -1458,7 +1478,8 @@ retry:
 		 * set ->slice_left to allow preemption for a new process
 		 */
 		cfqq->slice_left = 2 * cfqd->cfq_slice_idle;
-		cfq_mark_cfqq_idle_window(cfqq);
+		if (!cfqd->hw_tag)
+			cfq_mark_cfqq_idle_window(cfqq);
 		cfq_mark_cfqq_prio_changed(cfqq);
 		cfq_init_prio_data(cfqq);
 	}
@@ -1472,19 +1493,38 @@ out:
 	return cfqq;
 }
 
+static void
+cfq_drop_dead_cic(struct io_context *ioc, struct cfq_io_context *cic)
+{
+	spin_lock(&cfq_exit_lock);
+	rb_erase(&cic->rb_node, &ioc->cic_root);
+	list_del_init(&cic->queue_list);
+	spin_unlock(&cfq_exit_lock);
+	kmem_cache_free(cfq_ioc_pool, cic);
+	atomic_dec(&ioc_count);
+}
+
 static struct cfq_io_context *
 cfq_cic_rb_lookup(struct cfq_data *cfqd, struct io_context *ioc)
 {
-	struct rb_node *n = ioc->cic_root.rb_node;
+	struct rb_node *n;
 	struct cfq_io_context *cic;
-	void *key = cfqd;
+	void *k, *key = cfqd;
 
+restart:
+	n = ioc->cic_root.rb_node;
 	while (n) {
 		cic = rb_entry(n, struct cfq_io_context, rb_node);
+		/* ->key must be copied to avoid race with cfq_exit_queue() */
+		k = cic->key;
+		if (unlikely(!k)) {
+			cfq_drop_dead_cic(ioc, cic);
+			goto restart;
+		}
 
-		if (key < cic->key)
+		if (key < k)
 			n = n->rb_left;
-		else if (key > cic->key)
+		else if (key > k)
 			n = n->rb_right;
 		else
 			return cic;
@@ -1497,33 +1537,41 @@ static inline void
 cfq_cic_link(struct cfq_data *cfqd, struct io_context *ioc,
 	     struct cfq_io_context *cic)
 {
-	struct rb_node **p = &ioc->cic_root.rb_node;
-	struct rb_node *parent = NULL;
+	struct rb_node **p;
+	struct rb_node *parent;
 	struct cfq_io_context *__cic;
-
-	read_lock(&cfq_exit_lock);
+	void *k;
 
 	cic->ioc = ioc;
 	cic->key = cfqd;
 
 	ioc->set_ioprio = cfq_ioc_set_ioprio;
-
+restart:
+	parent = NULL;
+	p = &ioc->cic_root.rb_node;
 	while (*p) {
 		parent = *p;
 		__cic = rb_entry(parent, struct cfq_io_context, rb_node);
+		/* ->key must be copied to avoid race with cfq_exit_queue() */
+		k = __cic->key;
+		if (unlikely(!k)) {
+			cfq_drop_dead_cic(ioc, cic);
+			goto restart;
+		}
 
-		if (cic->key < __cic->key)
+		if (cic->key < k)
 			p = &(*p)->rb_left;
-		else if (cic->key > __cic->key)
+		else if (cic->key > k)
 			p = &(*p)->rb_right;
 		else
 			BUG();
 	}
 
+	spin_lock(&cfq_exit_lock);
 	rb_link_node(&cic->rb_node, parent, p);
 	rb_insert_color(&cic->rb_node, &ioc->cic_root);
 	list_add(&cic->queue_list, &cfqd->cic_list);
-	read_unlock(&cfq_exit_lock);
+	spin_unlock(&cfq_exit_lock);
 }
 
 /*
@@ -1622,7 +1670,7 @@ cfq_update_idle_window(struct cfq_data *cfqd, struct cfq_queue *cfqq,
 {
 	int enable_idle = cfq_cfqq_idle_window(cfqq);
 
-	if (!cic->ioc->task || !cfqd->cfq_slice_idle)
+	if (!cic->ioc->task || !cfqd->cfq_slice_idle || cfqd->hw_tag)
 		enable_idle = 0;
 	else if (sample_valid(cic->ttime_samples)) {
 		if (cic->ttime_mean > cfqd->cfq_slice_idle)
@@ -1713,14 +1761,24 @@ cfq_crq_enqueued(struct cfq_data *cfqd, struct cfq_queue *cfqq,
 
 	cfqq->next_crq = cfq_choose_req(cfqd, cfqq->next_crq, crq);
 
+	cic = crq->io_context;
+
 	/*
 	 * we never wait for an async request and we don't allow preemption
 	 * of an async request. so just return early
 	 */
-	if (!cfq_crq_is_sync(crq))
+	if (!cfq_crq_is_sync(crq)) {
+		/*
+		 * sync process issued an async request, if it's waiting
+		 * then expire it and kick rq handling.
+		 */
+		if (cic == cfqd->active_cic &&
+		    del_timer(&cfqd->idle_slice_timer)) {
+			cfq_slice_expired(cfqd, 0);
+			cfq_start_queueing(cfqd, cfqq);
+		}
 		return;
-
-	cic = crq->io_context;
+	}
 
 	cfq_update_io_thinktime(cfqd, cic);
 	cfq_update_io_seektime(cfqd, cic, crq);
@@ -2138,10 +2196,9 @@ static void cfq_idle_class_timer(unsigned long data)
 	 * race with a non-idle queue, reset timer
 	 */
 	end = cfqd->last_end_request + CFQ_IDLE_GRACE;
-	if (!time_after_eq(jiffies, end)) {
-		cfqd->idle_class_timer.expires = end;
-		add_timer(&cfqd->idle_class_timer);
-	} else
+	if (!time_after_eq(jiffies, end))
+		mod_timer(&cfqd->idle_class_timer, end);
+	else
 		cfq_schedule_dispatch(cfqd);
 
 	spin_unlock_irqrestore(cfqd->queue->queue_lock, flags);
@@ -2161,7 +2218,7 @@ static void cfq_exit_queue(elevator_t *e)
 
 	cfq_shutdown_timer_wq(cfqd);
 
-	write_lock(&cfq_exit_lock);
+	spin_lock(&cfq_exit_lock);
 	spin_lock_irq(q->queue_lock);
 
 	if (cfqd->active_queue)
@@ -2184,7 +2241,7 @@ static void cfq_exit_queue(elevator_t *e)
 	}
 
 	spin_unlock_irq(q->queue_lock);
-	write_unlock(&cfq_exit_lock);
+	spin_unlock(&cfq_exit_lock);
 
 	cfq_shutdown_timer_wq(cfqd);
 
@@ -2194,14 +2251,14 @@ static void cfq_exit_queue(elevator_t *e)
 	kfree(cfqd);
 }
 
-static int cfq_init_queue(request_queue_t *q, elevator_t *e)
+static void *cfq_init_queue(request_queue_t *q, elevator_t *e)
 {
 	struct cfq_data *cfqd;
 	int i;
 
 	cfqd = kmalloc(sizeof(*cfqd), GFP_KERNEL);
 	if (!cfqd)
-		return -ENOMEM;
+		return NULL;
 
 	memset(cfqd, 0, sizeof(*cfqd));
 
@@ -2231,8 +2288,6 @@ static int cfq_init_queue(request_queue_t *q, elevator_t *e)
 	for (i = 0; i < CFQ_QHASH_ENTRIES; i++)
 		INIT_HLIST_HEAD(&cfqd->cfq_hash[i]);
 
-	e->elevator_data = cfqd;
-
 	cfqd->queue = q;
 
 	cfqd->max_queued = q->nr_requests / 4;
@@ -2259,14 +2314,14 @@ static int cfq_init_queue(request_queue_t *q, elevator_t *e)
 	cfqd->cfq_slice_async_rq = cfq_slice_async_rq;
 	cfqd->cfq_slice_idle = cfq_slice_idle;
 
-	return 0;
+	return cfqd;
 out_crqpool:
 	kfree(cfqd->cfq_hash);
 out_cfqhash:
 	kfree(cfqd->crq_hash);
 out_crqhash:
 	kfree(cfqd);
-	return -ENOMEM;
+	return NULL;
 }
 
 static void cfq_slab_kill(void)
@@ -2439,9 +2494,10 @@ static void __exit cfq_exit(void)
 	DECLARE_COMPLETION(all_gone);
 	elv_unregister(&iosched_cfq);
 	ioc_gone = &all_gone;
-	barrier();
+	/* ioc_gone's update must be visible before reading ioc_count */
+	smp_wmb();
 	if (atomic_read(&ioc_count))
-		complete(ioc_gone);
+		wait_for_completion(ioc_gone);
 	synchronize_rcu();
 	cfq_slab_kill();
 }
diff --git a/block/deadline-iosched.c b/block/deadline-iosched.c
index 399fa1e60e1f..3bd0415a9828 100644
--- a/block/deadline-iosched.c
+++ b/block/deadline-iosched.c
@@ -613,24 +613,24 @@ static void deadline_exit_queue(elevator_t *e)
  * initialize elevator private data (deadline_data), and alloc a drq for
  * each request on the free lists
  */
-static int deadline_init_queue(request_queue_t *q, elevator_t *e)
+static void *deadline_init_queue(request_queue_t *q, elevator_t *e)
 {
 	struct deadline_data *dd;
 	int i;
 
 	if (!drq_pool)
-		return -ENOMEM;
+		return NULL;
 
 	dd = kmalloc_node(sizeof(*dd), GFP_KERNEL, q->node);
 	if (!dd)
-		return -ENOMEM;
+		return NULL;
 	memset(dd, 0, sizeof(*dd));
 
 	dd->hash = kmalloc_node(sizeof(struct list_head)*DL_HASH_ENTRIES,
 				GFP_KERNEL, q->node);
 	if (!dd->hash) {
 		kfree(dd);
-		return -ENOMEM;
+		return NULL;
 	}
 
 	dd->drq_pool = mempool_create_node(BLKDEV_MIN_RQ, mempool_alloc_slab,
@@ -638,7 +638,7 @@ static int deadline_init_queue(request_queue_t *q, elevator_t *e)
 	if (!dd->drq_pool) {
 		kfree(dd->hash);
 		kfree(dd);
-		return -ENOMEM;
+		return NULL;
 	}
 
 	for (i = 0; i < DL_HASH_ENTRIES; i++)
@@ -653,8 +653,7 @@ static int deadline_init_queue(request_queue_t *q, elevator_t *e)
 	dd->writes_starved = writes_starved;
 	dd->front_merges = 1;
 	dd->fifo_batch = fifo_batch;
-	e->elevator_data = dd;
-	return 0;
+	return dd;
 }
 
 static void deadline_put_request(request_queue_t *q, struct request *rq)
diff --git a/block/elevator.c b/block/elevator.c
index 0d6be03d929e..a0afdd317cef 100644
--- a/block/elevator.c
+++ b/block/elevator.c
@@ -121,16 +121,16 @@ static struct elevator_type *elevator_get(const char *name)
 	return e;
 }
 
-static int elevator_attach(request_queue_t *q, struct elevator_queue *eq)
+static void *elevator_init_queue(request_queue_t *q, struct elevator_queue *eq)
 {
-	int ret = 0;
+	return eq->ops->elevator_init_fn(q, eq);
+}
 
+static void elevator_attach(request_queue_t *q, struct elevator_queue *eq,
+			   void *data)
+{
 	q->elevator = eq;
-
-	if (eq->ops->elevator_init_fn)
-		ret = eq->ops->elevator_init_fn(q, eq);
-
-	return ret;
+	eq->elevator_data = data;
 }
 
 static char chosen_elevator[16];
@@ -181,6 +181,7 @@ int elevator_init(request_queue_t *q, char *name)
 	struct elevator_type *e = NULL;
 	struct elevator_queue *eq;
 	int ret = 0;
+	void *data;
 
 	INIT_LIST_HEAD(&q->queue_head);
 	q->last_merge = NULL;
@@ -202,10 +203,13 @@ int elevator_init(request_queue_t *q, char *name)
 	if (!eq)
 		return -ENOMEM;
 
-	ret = elevator_attach(q, eq);
-	if (ret)
+	data = elevator_init_queue(q, eq);
+	if (!data) {
 		kobject_put(&eq->kobj);
+		return -ENOMEM;
+	}
 
+	elevator_attach(q, eq, data);
 	return ret;
 }
 
@@ -333,6 +337,7 @@ void elv_insert(request_queue_t *q, struct request *rq, int where)
 {
 	struct list_head *pos;
 	unsigned ordseq;
+	int unplug_it = 1;
 
 	blk_add_trace_rq(q, rq, BLK_TA_INSERT);
 
@@ -399,6 +404,11 @@ void elv_insert(request_queue_t *q, struct request *rq, int where)
 		}
 
 		list_add_tail(&rq->queuelist, pos);
+		/*
+		 * most requeues happen because of a busy condition, don't
+		 * force unplug of the queue for that case.
+		 */
+		unplug_it = 0;
 		break;
 
 	default:
@@ -407,7 +417,7 @@ void elv_insert(request_queue_t *q, struct request *rq, int where)
 		BUG();
 	}
 
-	if (blk_queue_plugged(q)) {
+	if (unplug_it && blk_queue_plugged(q)) {
 		int nrq = q->rq.count[READ] + q->rq.count[WRITE]
 			- q->in_flight;
 
@@ -716,13 +726,16 @@ int elv_register_queue(struct request_queue *q)
 	return error;
 }
 
+static void __elv_unregister_queue(elevator_t *e)
+{
+	kobject_uevent(&e->kobj, KOBJ_REMOVE);
+	kobject_del(&e->kobj);
+}
+
 void elv_unregister_queue(struct request_queue *q)
 {
-	if (q) {
-		elevator_t *e = q->elevator;
-		kobject_uevent(&e->kobj, KOBJ_REMOVE);
-		kobject_del(&e->kobj);
-	}
+	if (q)
+		__elv_unregister_queue(q->elevator);
 }
 
 int elv_register(struct elevator_type *e)
@@ -774,6 +787,7 @@ EXPORT_SYMBOL_GPL(elv_unregister);
 static int elevator_switch(request_queue_t *q, struct elevator_type *new_e)
 {
 	elevator_t *old_elevator, *e;
+	void *data;
 
 	/*
 	 * Allocate new elevator
@@ -782,6 +796,12 @@ static int elevator_switch(request_queue_t *q, struct elevator_type *new_e)
 	if (!e)
 		return 0;
 
+	data = elevator_init_queue(q, e);
+	if (!data) {
+		kobject_put(&e->kobj);
+		return 0;
+	}
+
 	/*
 	 * Turn on BYPASS and drain all requests w/ elevator private data
 	 */
@@ -800,19 +820,19 @@ static int elevator_switch(request_queue_t *q, struct elevator_type *new_e)
 		elv_drain_elevator(q);
 	}
 
-	spin_unlock_irq(q->queue_lock);
-
 	/*
-	 * unregister old elevator data
+	 * Remember old elevator.
 	 */
-	elv_unregister_queue(q);
 	old_elevator = q->elevator;
 
 	/*
 	 * attach and start new elevator
 	 */
-	if (elevator_attach(q, e))
-		goto fail;
+	elevator_attach(q, e, data);
+
+	spin_unlock_irq(q->queue_lock);
+
+	__elv_unregister_queue(old_elevator);
 
 	if (elv_register_queue(q))
 		goto fail_register;
@@ -831,7 +851,6 @@ fail_register:
 	 */
 	elevator_exit(e);
 	e = NULL;
-fail:
 	q->elevator = old_elevator;
 	elv_register_queue(q);
 	clear_bit(QUEUE_FLAG_ELVSWITCH, &q->queue_flags);
@@ -895,10 +914,8 @@ ssize_t elv_iosched_show(request_queue_t *q, char *name)
 EXPORT_SYMBOL(elv_dispatch_sort);
 EXPORT_SYMBOL(elv_add_request);
 EXPORT_SYMBOL(__elv_add_request);
-EXPORT_SYMBOL(elv_requeue_request);
 EXPORT_SYMBOL(elv_next_request);
 EXPORT_SYMBOL(elv_dequeue_request);
 EXPORT_SYMBOL(elv_queue_empty);
-EXPORT_SYMBOL(elv_completed_request);
 EXPORT_SYMBOL(elevator_exit);
 EXPORT_SYMBOL(elevator_init);
diff --git a/block/ll_rw_blk.c b/block/ll_rw_blk.c
index e112d1a5dab6..7eb36c53f4b7 100644
--- a/block/ll_rw_blk.c
+++ b/block/ll_rw_blk.c
@@ -1554,7 +1554,7 @@ void blk_plug_device(request_queue_t *q)
 	 * don't plug a stopped queue, it must be paired with blk_start_queue()
 	 * which will restart the queueing
 	 */
-	if (test_bit(QUEUE_FLAG_STOPPED, &q->queue_flags))
+	if (blk_queue_stopped(q))
 		return;
 
 	if (!test_and_set_bit(QUEUE_FLAG_PLUGGED, &q->queue_flags)) {
@@ -1587,7 +1587,7 @@ EXPORT_SYMBOL(blk_remove_plug);
  */
 void __generic_unplug_device(request_queue_t *q)
 {
-	if (unlikely(test_bit(QUEUE_FLAG_STOPPED, &q->queue_flags)))
+	if (unlikely(blk_queue_stopped(q)))
 		return;
 
 	if (!blk_remove_plug(q))
@@ -1732,8 +1732,21 @@ void blk_run_queue(struct request_queue *q)
 
 	spin_lock_irqsave(q->queue_lock, flags);
 	blk_remove_plug(q);
-	if (!elv_queue_empty(q))
-		q->request_fn(q);
+
+	/*
+	 * Only recurse once to avoid overrunning the stack, let the unplug
+	 * handling reinvoke the handler shortly if we already got there.
+	 */
+	if (!elv_queue_empty(q)) {
+		if (!test_and_set_bit(QUEUE_FLAG_REENTER, &q->queue_flags)) {
+			q->request_fn(q);
+			clear_bit(QUEUE_FLAG_REENTER, &q->queue_flags);
+		} else {
+			blk_plug_device(q);
+			kblockd_schedule_work(&q->unplug_work);
+		}
+	}
+
 	spin_unlock_irqrestore(q->queue_lock, flags);
 }
 EXPORT_SYMBOL(blk_run_queue);
@@ -3385,7 +3398,7 @@ static int blk_cpu_notify(struct notifier_block *self, unsigned long action,
 }
 
 
-static struct notifier_block __devinitdata blk_cpu_notifier = {
+static struct notifier_block blk_cpu_notifier = {
 	.notifier_call	= blk_cpu_notify,
 };
 
@@ -3439,7 +3452,12 @@ void end_that_request_last(struct request *req, int uptodate)
 	if (unlikely(laptop_mode) && blk_fs_request(req))
 		laptop_io_completion();
 
-	if (disk && blk_fs_request(req)) {
+	/*
+	 * Account IO completion.  bar_rq isn't accounted as a normal
+	 * IO on queueing nor completion.  Accounting the containing
+	 * request is enough.
+	 */
+	if (disk && blk_fs_request(req) && req != &req->q->bar_rq) {
 		unsigned long duration = jiffies - req->start_time;
 		const int rw = rq_data_dir(req);
 
diff --git a/block/noop-iosched.c b/block/noop-iosched.c
index f370e4a7fe6d..56a7c620574f 100644
--- a/block/noop-iosched.c
+++ b/block/noop-iosched.c
@@ -65,16 +65,15 @@ noop_latter_request(request_queue_t *q, struct request *rq)
 	return list_entry(rq->queuelist.next, struct request, queuelist);
 }
 
-static int noop_init_queue(request_queue_t *q, elevator_t *e)
+static void *noop_init_queue(request_queue_t *q, elevator_t *e)
 {
 	struct noop_data *nd;
 
 	nd = kmalloc(sizeof(*nd), GFP_KERNEL);
 	if (!nd)
-		return -ENOMEM;
+		return NULL;
 	INIT_LIST_HEAD(&nd->queue);
-	e->elevator_data = nd;
-	return 0;
+	return nd;
 }
 
 static void noop_exit_queue(elevator_t *e)
diff --git a/drivers/Kconfig b/drivers/Kconfig
index 5c91d6afb117..aeb5ab2391e4 100644
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -68,8 +68,6 @@ source "drivers/leds/Kconfig"
 
 source "drivers/infiniband/Kconfig"
 
-source "drivers/sn/Kconfig"
-
 source "drivers/edac/Kconfig"
 
 source "drivers/rtc/Kconfig"
diff --git a/drivers/base/bus.c b/drivers/base/bus.c
index 48718b7f4fa0..76656acd00d4 100644
--- a/drivers/base/bus.c
+++ b/drivers/base/bus.c
@@ -188,6 +188,11 @@ static ssize_t driver_bind(struct device_driver *drv,
 		up(&dev->sem);
 		if (dev->parent)
 			up(&dev->parent->sem);
+
+		if (err > 0) 		/* success */
+			err = count;
+		else if (err == 0)	/* driver didn't accept device */
+			err = -ENODEV;
 	}
 	put_device(dev);
 	put_bus(bus);
diff --git a/drivers/base/class.c b/drivers/base/class.c
index df7fdabd0730..b1ea4df85c7d 100644
--- a/drivers/base/class.c
+++ b/drivers/base/class.c
@@ -456,6 +456,35 @@ static void class_device_remove_attrs(struct class_device * cd)
 	}
 }
 
+static int class_device_add_groups(struct class_device * cd)
+{
+	int i;
+	int error = 0;
+
+	if (cd->groups) {
+		for (i = 0; cd->groups[i]; i++) {
+			error = sysfs_create_group(&cd->kobj, cd->groups[i]);
+			if (error) {
+				while (--i >= 0)
+					sysfs_remove_group(&cd->kobj, cd->groups[i]);
+				goto out;
+			}
+		}
+	}
+out:
+	return error;
+}
+
+static void class_device_remove_groups(struct class_device * cd)
+{
+	int i;
+	if (cd->groups) {
+		for (i = 0; cd->groups[i]; i++) {
+			sysfs_remove_group(&cd->kobj, cd->groups[i]);
+		}
+	}
+}
+
 static ssize_t show_dev(struct class_device *class_dev, char *buf)
 {
 	return print_dev_t(buf, class_dev->devt);
@@ -559,17 +588,18 @@ int class_device_add(struct class_device *class_dev)
 				  class_name);
 	}
 
+	class_device_add_groups(class_dev);
+
 	kobject_uevent(&class_dev->kobj, KOBJ_ADD);
 
 	/* notify any interfaces this device is now here */
-	if (parent_class) {
-		down(&parent_class->sem);
-		list_add_tail(&class_dev->node, &parent_class->children);
-		list_for_each_entry(class_intf, &parent_class->interfaces, node)
-			if (class_intf->add)
-				class_intf->add(class_dev, class_intf);
-		up(&parent_class->sem);
+	down(&parent_class->sem);
+	list_add_tail(&class_dev->node, &parent_class->children);
+	list_for_each_entry(class_intf, &parent_class->interfaces, node) {
+		if (class_intf->add)
+			class_intf->add(class_dev, class_intf);
 	}
+	up(&parent_class->sem);
 
  register_done:
 	if (error) {
@@ -673,6 +703,7 @@ void class_device_del(struct class_device *class_dev)
 	if (class_dev->devt_attr)
 		class_device_remove_file(class_dev, class_dev->devt_attr);
 	class_device_remove_attrs(class_dev);
+	class_device_remove_groups(class_dev);
 
 	kobject_uevent(&class_dev->kobj, KOBJ_REMOVE);
 	kobject_del(&class_dev->kobj);
diff --git a/drivers/base/dd.c b/drivers/base/dd.c
index 730a9ce0a14a..889c71111239 100644
--- a/drivers/base/dd.c
+++ b/drivers/base/dd.c
@@ -209,7 +209,7 @@ static void __device_release_driver(struct device * dev)
 		sysfs_remove_link(&dev->kobj, "driver");
 		klist_remove(&dev->knode_driver);
 
-		if (dev->bus->remove)
+		if (dev->bus && dev->bus->remove)
 			dev->bus->remove(dev);
 		else if (drv->remove)
 			drv->remove(dev);
diff --git a/drivers/base/firmware_class.c b/drivers/base/firmware_class.c
index 472318205236..0c99ae6a3407 100644
--- a/drivers/base/firmware_class.c
+++ b/drivers/base/firmware_class.c
@@ -86,18 +86,9 @@ firmware_timeout_store(struct class *class, const char *buf, size_t count)
 static CLASS_ATTR(timeout, 0644, firmware_timeout_show, firmware_timeout_store);
 
 static void  fw_class_dev_release(struct class_device *class_dev);
-int firmware_class_uevent(struct class_device *dev, char **envp,
-			   int num_envp, char *buffer, int buffer_size);
 
-static struct class firmware_class = {
-	.name		= "firmware",
-	.uevent	= firmware_class_uevent,
-	.release	= fw_class_dev_release,
-};
-
-int
-firmware_class_uevent(struct class_device *class_dev, char **envp,
-		       int num_envp, char *buffer, int buffer_size)
+static int firmware_class_uevent(struct class_device *class_dev, char **envp,
+				 int num_envp, char *buffer, int buffer_size)
 {
 	struct firmware_priv *fw_priv = class_get_devdata(class_dev);
 	int i = 0, len = 0;
@@ -116,6 +107,12 @@ firmware_class_uevent(struct class_device *class_dev, char **envp,
 	return 0;
 }
 
+static struct class firmware_class = {
+	.name		= "firmware",
+	.uevent		= firmware_class_uevent,
+	.release	= fw_class_dev_release,
+};
+
 static ssize_t
 firmware_loading_show(struct class_device *class_dev, char *buf)
 {
@@ -493,25 +490,6 @@ release_firmware(const struct firmware *fw)
 	}
 }
 
-/**
- * register_firmware: - provide a firmware image for later usage
- * @name: name of firmware image file
- * @data: buffer pointer for the firmware image
- * @size: size of the data buffer area
- *
- *	Make sure that @data will be available by requesting firmware @name.
- *
- *	Note: This will not be possible until some kind of persistence
- *	is available.
- **/
-void
-register_firmware(const char *name, const u8 *data, size_t size)
-{
-	/* This is meaningless without firmware caching, so until we
-	 * decide if firmware caching is reasonable just leave it as a
-	 * noop */
-}
-
 /* Async support */
 struct firmware_work {
 	struct work_struct work;
@@ -630,4 +608,3 @@ module_exit(firmware_class_exit);
 EXPORT_SYMBOL(release_firmware);
 EXPORT_SYMBOL(request_firmware);
 EXPORT_SYMBOL(request_firmware_nowait);
-EXPORT_SYMBOL(register_firmware);
diff --git a/drivers/base/power/suspend.c b/drivers/base/power/suspend.c
index bdb60663f2ef..2a769cc6f5f9 100644
--- a/drivers/base/power/suspend.c
+++ b/drivers/base/power/suspend.c
@@ -8,8 +8,9 @@
  *
  */
 
-#include <linux/vt_kern.h>
 #include <linux/device.h>
+#include <linux/kallsyms.h>
+#include <linux/pm.h>
 #include "../base.h"
 #include "power.h"
 
@@ -58,11 +59,13 @@ int suspend_device(struct device * dev, pm_message_t state)
 	if (dev->bus && dev->bus->suspend && !dev->power.power_state.event) {
 		dev_dbg(dev, "suspending\n");
 		error = dev->bus->suspend(dev, state);
+		suspend_report_result(dev->bus->suspend, error);
 	}
 	up(&dev->sem);
 	return error;
 }
 
+
 /**
  *	device_suspend - Save state and stop all devices in system.
  *	@state:		Power state to put each device in.
@@ -82,9 +85,6 @@ int device_suspend(pm_message_t state)
 {
 	int error = 0;
 
-	if (!is_console_suspend_safe())
-		return -EINVAL;
-
 	down(&dpm_sem);
 	down(&dpm_list_sem);
 	while (!list_empty(&dpm_active) && error == 0) {
@@ -169,3 +169,12 @@ int device_power_down(pm_message_t state)
 
 EXPORT_SYMBOL_GPL(device_power_down);
 
+void __suspend_report_result(const char *function, void *fn, int ret)
+{
+	if (ret) {
+		printk(KERN_ERR "%s(): ", function);
+		print_fn_descriptor_symbol("%s() returns ", (unsigned long)fn);
+		printk("%d\n", ret);
+	}
+}
+EXPORT_SYMBOL_GPL(__suspend_report_result);
diff --git a/drivers/base/topology.c b/drivers/base/topology.c
index 915810f6237e..8c52421cbc54 100644
--- a/drivers/base/topology.c
+++ b/drivers/base/topology.c
@@ -107,7 +107,7 @@ static int __cpuinit topology_remove_dev(struct sys_device * sys_dev)
 	return 0;
 }
 
-static int __cpuinit topology_cpu_callback(struct notifier_block *nfb,
+static int topology_cpu_callback(struct notifier_block *nfb,
 		unsigned long action, void *hcpu)
 {
 	unsigned int cpu = (unsigned long)hcpu;
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index 1b0fd31c57c3..1319d8f20640 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -1180,6 +1180,53 @@ static int revalidate_allvol(ctlr_info_t *host)
         return 0;
 }
 
+static inline void complete_buffers(struct bio *bio, int status)
+{
+	while (bio) {
+		struct bio *xbh = bio->bi_next;
+		int nr_sectors = bio_sectors(bio);
+
+		bio->bi_next = NULL;
+		blk_finished_io(len);
+		bio_endio(bio, nr_sectors << 9, status ? 0 : -EIO);
+		bio = xbh;
+	}
+
+}
+
+static void cciss_softirq_done(struct request *rq)
+{
+	CommandList_struct *cmd = rq->completion_data;
+	ctlr_info_t *h = hba[cmd->ctlr];
+	unsigned long flags;
+	u64bit temp64;
+	int i, ddir;
+
+	if (cmd->Request.Type.Direction == XFER_READ)
+		ddir = PCI_DMA_FROMDEVICE;
+	else
+		ddir = PCI_DMA_TODEVICE;
+
+	/* command did not need to be retried */
+	/* unmap the DMA mapping for all the scatter gather elements */
+	for(i=0; i<cmd->Header.SGList; i++) {
+		temp64.val32.lower = cmd->SG[i].Addr.lower;
+		temp64.val32.upper = cmd->SG[i].Addr.upper;
+		pci_unmap_page(h->pdev, temp64.val, cmd->SG[i].Len, ddir);
+	}
+
+	complete_buffers(rq->bio, rq->errors);
+
+#ifdef CCISS_DEBUG
+	printk("Done with %p\n", rq);
+#endif /* CCISS_DEBUG */
+
+	spin_lock_irqsave(&h->lock, flags);
+	end_that_request_last(rq, rq->errors);
+	cmd_free(h, cmd,1);
+	spin_unlock_irqrestore(&h->lock, flags);
+}
+
 /* This function will check the usage_count of the drive to be updated/added.
  * If the usage_count is zero then the drive information will be updated and
  * the disk will be re-registered with the kernel.  If not then it will be
@@ -1248,6 +1295,8 @@ static void cciss_update_drive_info(int ctlr, int drv_index)
 
 		blk_queue_max_sectors(disk->queue, 512);
 
+		blk_queue_softirq_done(disk->queue, cciss_softirq_done);
+
 		disk->queue->queuedata = hba[ctlr];
 
 		blk_queue_hardsect_size(disk->queue,
@@ -2147,20 +2196,6 @@ static void start_io( ctlr_info_t *h)
 		addQ (&(h->cmpQ), c); 
 	}
 }
-
-static inline void complete_buffers(struct bio *bio, int status)
-{
-	while (bio) {
-		struct bio *xbh = bio->bi_next; 
-		int nr_sectors = bio_sectors(bio);
-
-		bio->bi_next = NULL; 
-		blk_finished_io(len);
-		bio_endio(bio, nr_sectors << 9, status ? 0 : -EIO);
-		bio = xbh;
-	}
-
-} 
 /* Assumes that CCISS_LOCK(h->ctlr) is held. */
 /* Zeros out the error record and then resends the command back */
 /* to the controller */
@@ -2178,39 +2213,6 @@ static inline void resend_cciss_cmd( ctlr_info_t *h, CommandList_struct *c)
 	start_io(h);
 }
 
-static void cciss_softirq_done(struct request *rq)
-{
-	CommandList_struct *cmd = rq->completion_data;
-	ctlr_info_t *h = hba[cmd->ctlr];
-	unsigned long flags;
-	u64bit temp64;
-	int i, ddir;
-
-	if (cmd->Request.Type.Direction == XFER_READ)
-		ddir = PCI_DMA_FROMDEVICE;
-	else
-		ddir = PCI_DMA_TODEVICE;
-
-	/* command did not need to be retried */
-	/* unmap the DMA mapping for all the scatter gather elements */
-	for(i=0; i<cmd->Header.SGList; i++) {
-		temp64.val32.lower = cmd->SG[i].Addr.lower;
-		temp64.val32.upper = cmd->SG[i].Addr.upper;
-		pci_unmap_page(h->pdev, temp64.val, cmd->SG[i].Len, ddir);
-	}
-
-	complete_buffers(rq->bio, rq->errors);
-
-#ifdef CCISS_DEBUG
-	printk("Done with %p\n", rq);
-#endif /* CCISS_DEBUG */ 
-
-	spin_lock_irqsave(&h->lock, flags);
-	end_that_request_last(rq, rq->errors);
-	cmd_free(h, cmd,1);
-	spin_unlock_irqrestore(&h->lock, flags);
-}
-
 /* checks the status of the job and calls complete buffers to mark all 
  * buffers for the completed job. Note that this function does not need
  * to hold the hba/queue lock.
diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c
index bedb689b051f..dff1e67b1dd4 100644
--- a/drivers/block/floppy.c
+++ b/drivers/block/floppy.c
@@ -4301,7 +4301,7 @@ static int __init floppy_init(void)
 	}
 
 	use_virtual_dma = can_use_virtual_dma & 1;
-#if defined(CONFIG_PPC64)
+#if defined(CONFIG_PPC_MERGE)
 	if (check_legacy_ioport(FDC1)) {
 		del_timer(&fd_timeout);
 		err = -ENODEV;
diff --git a/drivers/block/ub.c b/drivers/block/ub.c
index f73446f580df..c688c25992e4 100644
--- a/drivers/block/ub.c
+++ b/drivers/block/ub.c
@@ -536,6 +536,9 @@ static void ub_cleanup(struct ub_dev *sc)
 		kfree(lun);
 	}
 
+	usb_set_intfdata(sc->intf, NULL);
+	usb_put_intf(sc->intf);
+	usb_put_dev(sc->dev);
 	kfree(sc);
 }
 
@@ -2221,7 +2224,12 @@ static int ub_probe(struct usb_interface *intf,
 	// sc->ifnum = intf->cur_altsetting->desc.bInterfaceNumber;
 	usb_set_intfdata(intf, sc);
 	usb_get_dev(sc->dev);
-	// usb_get_intf(sc->intf);	/* Do we need this? */
+	/*
+	 * Since we give the interface struct to the block level through
+	 * disk->driverfs_dev, we have to pin it. Otherwise, block_uevent
+	 * oopses on close after a disconnect (kernels 2.6.16 and up).
+	 */
+	usb_get_intf(sc->intf);
 
 	snprintf(sc->name, 12, DRV_NAME "(%d.%d)",
 	    sc->dev->bus->busnum, sc->dev->devnum);
@@ -2286,7 +2294,7 @@ static int ub_probe(struct usb_interface *intf,
 
 err_dev_desc:
 	usb_set_intfdata(intf, NULL);
-	// usb_put_intf(sc->intf);
+	usb_put_intf(sc->intf);
 	usb_put_dev(sc->dev);
 	kfree(sc);
 err_core:
@@ -2461,12 +2469,6 @@ static void ub_disconnect(struct usb_interface *intf)
 	 * and no URBs left in transit.
 	 */
 
-	usb_set_intfdata(intf, NULL);
-	// usb_put_intf(sc->intf);
-	sc->intf = NULL;
-	usb_put_dev(sc->dev);
-	sc->dev = NULL;
-
 	ub_put(sc);
 }
 
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index 402296670d3a..78d928f9d9f1 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -291,7 +291,7 @@ config SX
 
 config RIO
 	tristate "Specialix RIO system support"
-	depends on SERIAL_NONSTANDARD && !64BIT
+	depends on SERIAL_NONSTANDARD
 	help
 	  This is a driver for the Specialix RIO, a smart serial card which
 	  drives an outboard box that can support up to 128 ports.  Product
diff --git a/drivers/char/agp/Kconfig b/drivers/char/agp/Kconfig
index 0b9cf9c59a21..7c88c060a9e6 100644
--- a/drivers/char/agp/Kconfig
+++ b/drivers/char/agp/Kconfig
@@ -86,7 +86,7 @@ config AGP_NVIDIA
 
 config AGP_SIS
 	tristate "SiS chipset support"
-	depends on AGP && X86_32
+	depends on AGP
 	help
 	  This option gives you AGP support for the GLX component of
 	  X on Silicon Integrated Systems [SiS] chipsets.
diff --git a/drivers/char/agp/amd64-agp.c b/drivers/char/agp/amd64-agp.c
index 36517d4d1ad9..ac3c33a2e37d 100644
--- a/drivers/char/agp/amd64-agp.c
+++ b/drivers/char/agp/amd64-agp.c
@@ -617,6 +617,9 @@ static int agp_amd64_resume(struct pci_dev *pdev)
 	pci_set_power_state(pdev, PCI_D0);
 	pci_restore_state(pdev);
 
+	if (pdev->vendor == PCI_VENDOR_ID_NVIDIA)
+		nforce3_agp_init(pdev);
+
 	return amd_8151_configure();
 }
 
diff --git a/drivers/char/agp/efficeon-agp.c b/drivers/char/agp/efficeon-agp.c
index fed0a87448d8..86a966b65236 100644
--- a/drivers/char/agp/efficeon-agp.c
+++ b/drivers/char/agp/efficeon-agp.c
@@ -64,6 +64,12 @@ static struct gatt_mask efficeon_generic_masks[] =
 	{.mask = 0x00000001, .type = 0}
 };
 
+/* This function does the same thing as mask_memory() for this chipset... */
+static inline unsigned long efficeon_mask_memory(unsigned long addr)
+{
+	return addr | 0x00000001;
+}
+
 static struct aper_size_info_lvl2 efficeon_generic_sizes[4] =
 {
 	{256, 65536, 0},
@@ -251,7 +257,7 @@ static int efficeon_insert_memory(struct agp_memory * mem, off_t pg_start, int t
 	last_page = NULL;
 	for (i = 0; i < count; i++) {
 		int index = pg_start + i;
-		unsigned long insert = mem->memory[i];
+		unsigned long insert = efficeon_mask_memory(mem->memory[i]);
 
 		page = (unsigned int *) efficeon_private.l1_table[index >> 10];
 
diff --git a/drivers/char/agp/via-agp.c b/drivers/char/agp/via-agp.c
index 97b0a890ba7f..b8ec25d17478 100644
--- a/drivers/char/agp/via-agp.c
+++ b/drivers/char/agp/via-agp.c
@@ -345,6 +345,12 @@ static struct agp_device_ids via_agp_device_ids[] __devinitdata =
 		.chipset_name	= "PT880",
 	},
 
+	/* PT880 Ultra */
+	{
+		.device_id	= PCI_DEVICE_ID_VIA_PT880ULTRA,
+		.chipset_name	= "PT880 Ultra",
+	},
+
 	/* PT890 */
 	{
 		.device_id	= PCI_DEVICE_ID_VIA_8783_0,
@@ -511,6 +517,7 @@ static struct pci_device_id agp_via_pci_table[] = {
 	ID(PCI_DEVICE_ID_VIA_8763_0),
 	ID(PCI_DEVICE_ID_VIA_8378_0),
 	ID(PCI_DEVICE_ID_VIA_PT880),
+	ID(PCI_DEVICE_ID_VIA_PT880ULTRA),
 	ID(PCI_DEVICE_ID_VIA_8783_0),
 	ID(PCI_DEVICE_ID_VIA_PX8X0_0),
 	ID(PCI_DEVICE_ID_VIA_3269_0),
diff --git a/drivers/char/cs5535_gpio.c b/drivers/char/cs5535_gpio.c
index 5d72f50de1ac..46d66037b917 100644
--- a/drivers/char/cs5535_gpio.c
+++ b/drivers/char/cs5535_gpio.c
@@ -241,9 +241,10 @@ static int __init cs5535_gpio_init(void)
 static void __exit cs5535_gpio_cleanup(void)
 {
 	dev_t dev_id = MKDEV(major, 0);
+
+	cdev_del(&cs5535_gpio_cdev);
 	unregister_chrdev_region(dev_id, CS5535_GPIO_COUNT);
-	if (gpio_base != 0)
-		release_region(gpio_base, CS5535_GPIO_SIZE);
+	release_region(gpio_base, CS5535_GPIO_SIZE);
 }
 
 module_init(cs5535_gpio_init);
diff --git a/drivers/char/drm/drmP.h b/drivers/char/drm/drmP.h
index edc72a6348a7..cb76e5ca9a23 100644
--- a/drivers/char/drm/drmP.h
+++ b/drivers/char/drm/drmP.h
@@ -815,8 +815,6 @@ extern int drm_mem_info(char *buf, char **start, off_t offset,
 extern void *drm_realloc(void *oldpt, size_t oldsize, size_t size, int area);
 extern void *drm_ioremap(unsigned long offset, unsigned long size,
 			 drm_device_t * dev);
-extern void *drm_ioremap_nocache(unsigned long offset, unsigned long size,
-				 drm_device_t * dev);
 extern void drm_ioremapfree(void *pt, unsigned long size, drm_device_t * dev);
 
 extern DRM_AGP_MEM *drm_alloc_agp(drm_device_t * dev, int pages, u32 type);
@@ -891,7 +889,6 @@ extern int drm_lock_free(drm_device_t * dev,
 				/* Buffer management support (drm_bufs.h) */
 extern int drm_addbufs_agp(drm_device_t * dev, drm_buf_desc_t * request);
 extern int drm_addbufs_pci(drm_device_t * dev, drm_buf_desc_t * request);
-extern int drm_addbufs_fb(drm_device_t *dev, drm_buf_desc_t *request);
 extern int drm_addmap(drm_device_t * dev, unsigned int offset,
 		      unsigned int size, drm_map_type_t type,
 		      drm_map_flags_t flags, drm_local_map_t ** map_ptr);
@@ -1022,11 +1019,13 @@ static __inline__ void drm_core_ioremap(struct drm_map *map,
 	map->handle = drm_ioremap(map->offset, map->size, dev);
 }
 
+#if 0
 static __inline__ void drm_core_ioremap_nocache(struct drm_map *map,
 						struct drm_device *dev)
 {
 	map->handle = drm_ioremap_nocache(map->offset, map->size, dev);
 }
+#endif  /*  0  */
 
 static __inline__ void drm_core_ioremapfree(struct drm_map *map,
 					    struct drm_device *dev)
diff --git a/drivers/char/drm/drm_agpsupport.c b/drivers/char/drm/drm_agpsupport.c
index fabc930c67a2..40bfd9b01e39 100644
--- a/drivers/char/drm/drm_agpsupport.c
+++ b/drivers/char/drm/drm_agpsupport.c
@@ -503,8 +503,6 @@ int drm_agp_bind_memory(DRM_AGP_MEM * handle, off_t start)
 	return agp_bind_memory(handle, start);
 }
 
-EXPORT_SYMBOL(drm_agp_bind_memory);
-
 /** Calls agp_unbind_memory() */
 int drm_agp_unbind_memory(DRM_AGP_MEM * handle)
 {
diff --git a/drivers/char/drm/drm_bufs.c b/drivers/char/drm/drm_bufs.c
index 8a9cf12e6183..006b06d29727 100644
--- a/drivers/char/drm/drm_bufs.c
+++ b/drivers/char/drm/drm_bufs.c
@@ -386,7 +386,6 @@ int drm_rmmap_locked(drm_device_t *dev, drm_local_map_t *map)
 
 	return 0;
 }
-EXPORT_SYMBOL(drm_rmmap_locked);
 
 int drm_rmmap(drm_device_t *dev, drm_local_map_t *map)
 {
@@ -398,7 +397,6 @@ int drm_rmmap(drm_device_t *dev, drm_local_map_t *map)
 
 	return ret;
 }
-EXPORT_SYMBOL(drm_rmmap);
 
 /* The rmmap ioctl appears to be unnecessary.  All mappings are torn down on
  * the last close of the device, and this is necessary for cleanup when things
@@ -1053,7 +1051,7 @@ static int drm_addbufs_sg(drm_device_t * dev, drm_buf_desc_t * request)
 	return 0;
 }
 
-int drm_addbufs_fb(drm_device_t * dev, drm_buf_desc_t * request)
+static int drm_addbufs_fb(drm_device_t * dev, drm_buf_desc_t * request)
 {
 	drm_device_dma_t *dma = dev->dma;
 	drm_buf_entry_t *entry;
@@ -1212,7 +1210,6 @@ int drm_addbufs_fb(drm_device_t * dev, drm_buf_desc_t * request)
 	atomic_dec(&dev->buf_alloc);
 	return 0;
 }
-EXPORT_SYMBOL(drm_addbufs_fb);
 
 
 /**
diff --git a/drivers/char/drm/drm_drv.c b/drivers/char/drm/drm_drv.c
index dc6bbe8a18dc..3c0b882a8e72 100644
--- a/drivers/char/drm/drm_drv.c
+++ b/drivers/char/drm/drm_drv.c
@@ -75,8 +75,8 @@ static drm_ioctl_desc_t drm_ioctls[] = {
 	[DRM_IOCTL_NR(DRM_IOCTL_SET_SAREA_CTX)] = {drm_setsareactx, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY},
 	[DRM_IOCTL_NR(DRM_IOCTL_GET_SAREA_CTX)] = {drm_getsareactx, DRM_AUTH},
 
-	[DRM_IOCTL_NR(DRM_IOCTL_ADD_CTX)] = {drm_addctx, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY},
-	[DRM_IOCTL_NR(DRM_IOCTL_RM_CTX)] = {drm_rmctx, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY},
+	[DRM_IOCTL_NR(DRM_IOCTL_ADD_CTX)] = {drm_addctx, DRM_AUTH|DRM_ROOT_ONLY},
+	[DRM_IOCTL_NR(DRM_IOCTL_RM_CTX)] = {drm_rmctx, DRM_AUTH|DRM_ROOT_ONLY},
 	[DRM_IOCTL_NR(DRM_IOCTL_MOD_CTX)] = {drm_modctx, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY},
 	[DRM_IOCTL_NR(DRM_IOCTL_GET_CTX)] = {drm_getctx, DRM_AUTH},
 	[DRM_IOCTL_NR(DRM_IOCTL_SWITCH_CTX)] = {drm_switchctx, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY},
diff --git a/drivers/char/drm/drm_memory.c b/drivers/char/drm/drm_memory.c
index dddf8de66143..7e3318e1d1c6 100644
--- a/drivers/char/drm/drm_memory.c
+++ b/drivers/char/drm/drm_memory.c
@@ -80,6 +80,71 @@ void *drm_realloc(void *oldpt, size_t oldsize, size_t size, int area)
 }
 
 #if __OS_HAS_AGP
+/*
+ * Find the drm_map that covers the range [offset, offset+size).
+ */
+static drm_map_t *drm_lookup_map(unsigned long offset,
+				 unsigned long size, drm_device_t * dev)
+{
+	struct list_head *list;
+	drm_map_list_t *r_list;
+	drm_map_t *map;
+
+	list_for_each(list, &dev->maplist->head) {
+		r_list = (drm_map_list_t *) list;
+		map = r_list->map;
+		if (!map)
+			continue;
+		if (map->offset <= offset
+		    && (offset + size) <= (map->offset + map->size))
+			return map;
+	}
+	return NULL;
+}
+
+static void *agp_remap(unsigned long offset, unsigned long size,
+		       drm_device_t * dev)
+{
+	unsigned long *phys_addr_map, i, num_pages =
+	    PAGE_ALIGN(size) / PAGE_SIZE;
+	struct drm_agp_mem *agpmem;
+	struct page **page_map;
+	void *addr;
+
+	size = PAGE_ALIGN(size);
+
+#ifdef __alpha__
+	offset -= dev->hose->mem_space->start;
+#endif
+
+	for (agpmem = dev->agp->memory; agpmem; agpmem = agpmem->next)
+		if (agpmem->bound <= offset
+		    && (agpmem->bound + (agpmem->pages << PAGE_SHIFT)) >=
+		    (offset + size))
+			break;
+	if (!agpmem)
+		return NULL;
+
+	/*
+	 * OK, we're mapping AGP space on a chipset/platform on which memory accesses by
+	 * the CPU do not get remapped by the GART.  We fix this by using the kernel's
+	 * page-table instead (that's probably faster anyhow...).
+	 */
+	/* note: use vmalloc() because num_pages could be large... */
+	page_map = vmalloc(num_pages * sizeof(struct page *));
+	if (!page_map)
+		return NULL;
+
+	phys_addr_map =
+	    agpmem->memory->memory + (offset - agpmem->bound) / PAGE_SIZE;
+	for (i = 0; i < num_pages; ++i)
+		page_map[i] = pfn_to_page(phys_addr_map[i] >> PAGE_SHIFT);
+	addr = vmap(page_map, num_pages, VM_IOREMAP, PAGE_AGP);
+	vfree(page_map);
+
+	return addr;
+}
+
 /** Wrapper around agp_allocate_memory() */
 DRM_AGP_MEM *drm_alloc_agp(drm_device_t * dev, int pages, u32 type)
 {
@@ -103,5 +168,74 @@ int drm_unbind_agp(DRM_AGP_MEM * handle)
 {
 	return drm_agp_unbind_memory(handle);
 }
+
+#else  /*  __OS_HAS_AGP  */
+
+static inline drm_map_t *drm_lookup_map(unsigned long offset,
+					unsigned long size, drm_device_t * dev)
+{
+	return NULL;
+}
+
+static inline void *agp_remap(unsigned long offset, unsigned long size,
+			      drm_device_t * dev)
+{
+	return NULL;
+}
+
 #endif				/* agp */
+
+void *drm_ioremap(unsigned long offset, unsigned long size,
+				drm_device_t * dev)
+{
+	if (drm_core_has_AGP(dev) && dev->agp && dev->agp->cant_use_aperture) {
+		drm_map_t *map = drm_lookup_map(offset, size, dev);
+
+		if (map && map->type == _DRM_AGP)
+			return agp_remap(offset, size, dev);
+	}
+	return ioremap(offset, size);
+}
+EXPORT_SYMBOL(drm_ioremap);
+
+#if 0
+void *drm_ioremap_nocache(unsigned long offset,
+					unsigned long size, drm_device_t * dev)
+{
+	if (drm_core_has_AGP(dev) && dev->agp && dev->agp->cant_use_aperture) {
+		drm_map_t *map = drm_lookup_map(offset, size, dev);
+
+		if (map && map->type == _DRM_AGP)
+			return agp_remap(offset, size, dev);
+	}
+	return ioremap_nocache(offset, size);
+}
+#endif  /*  0  */
+
+void drm_ioremapfree(void *pt, unsigned long size,
+				   drm_device_t * dev)
+{
+	/*
+	 * This is a bit ugly.  It would be much cleaner if the DRM API would use separate
+	 * routines for handling mappings in the AGP space.  Hopefully this can be done in
+	 * a future revision of the interface...
+	 */
+	if (drm_core_has_AGP(dev) && dev->agp && dev->agp->cant_use_aperture
+	    && ((unsigned long)pt >= VMALLOC_START
+		&& (unsigned long)pt < VMALLOC_END)) {
+		unsigned long offset;
+		drm_map_t *map;
+
+		offset = drm_follow_page(pt) | ((unsigned long)pt & ~PAGE_MASK);
+		map = drm_lookup_map(offset, size, dev);
+		if (map && map->type == _DRM_AGP) {
+			vunmap(pt);
+			return;
+		}
+	}
+
+	iounmap(pt);
+}
+EXPORT_SYMBOL(drm_ioremapfree);
+
 #endif				/* debug_memory */
diff --git a/drivers/char/drm/drm_memory.h b/drivers/char/drm/drm_memory.h
index 3732a61c3762..714d9aedcff5 100644
--- a/drivers/char/drm/drm_memory.h
+++ b/drivers/char/drm/drm_memory.h
@@ -57,71 +57,6 @@
 # endif
 #endif
 
-/*
- * Find the drm_map that covers the range [offset, offset+size).
- */
-static inline drm_map_t *drm_lookup_map(unsigned long offset,
-					unsigned long size, drm_device_t * dev)
-{
-	struct list_head *list;
-	drm_map_list_t *r_list;
-	drm_map_t *map;
-
-	list_for_each(list, &dev->maplist->head) {
-		r_list = (drm_map_list_t *) list;
-		map = r_list->map;
-		if (!map)
-			continue;
-		if (map->offset <= offset
-		    && (offset + size) <= (map->offset + map->size))
-			return map;
-	}
-	return NULL;
-}
-
-static inline void *agp_remap(unsigned long offset, unsigned long size,
-			      drm_device_t * dev)
-{
-	unsigned long *phys_addr_map, i, num_pages =
-	    PAGE_ALIGN(size) / PAGE_SIZE;
-	struct drm_agp_mem *agpmem;
-	struct page **page_map;
-	void *addr;
-
-	size = PAGE_ALIGN(size);
-
-#ifdef __alpha__
-	offset -= dev->hose->mem_space->start;
-#endif
-
-	for (agpmem = dev->agp->memory; agpmem; agpmem = agpmem->next)
-		if (agpmem->bound <= offset
-		    && (agpmem->bound + (agpmem->pages << PAGE_SHIFT)) >=
-		    (offset + size))
-			break;
-	if (!agpmem)
-		return NULL;
-
-	/*
-	 * OK, we're mapping AGP space on a chipset/platform on which memory accesses by
-	 * the CPU do not get remapped by the GART.  We fix this by using the kernel's
-	 * page-table instead (that's probably faster anyhow...).
-	 */
-	/* note: use vmalloc() because num_pages could be large... */
-	page_map = vmalloc(num_pages * sizeof(struct page *));
-	if (!page_map)
-		return NULL;
-
-	phys_addr_map =
-	    agpmem->memory->memory + (offset - agpmem->bound) / PAGE_SIZE;
-	for (i = 0; i < num_pages; ++i)
-		page_map[i] = pfn_to_page(phys_addr_map[i] >> PAGE_SHIFT);
-	addr = vmap(page_map, num_pages, VM_IOREMAP, PAGE_AGP);
-	vfree(page_map);
-
-	return addr;
-}
-
 static inline unsigned long drm_follow_page(void *vaddr)
 {
 	pgd_t *pgd = pgd_offset_k((unsigned long)vaddr);
@@ -133,18 +68,6 @@ static inline unsigned long drm_follow_page(void *vaddr)
 
 #else				/* __OS_HAS_AGP */
 
-static inline drm_map_t *drm_lookup_map(unsigned long offset,
-					unsigned long size, drm_device_t * dev)
-{
-	return NULL;
-}
-
-static inline void *agp_remap(unsigned long offset, unsigned long size,
-			      drm_device_t * dev)
-{
-	return NULL;
-}
-
 static inline unsigned long drm_follow_page(void *vaddr)
 {
 	return 0;
@@ -152,51 +75,8 @@ static inline unsigned long drm_follow_page(void *vaddr)
 
 #endif
 
-static inline void *drm_ioremap(unsigned long offset, unsigned long size,
-				drm_device_t * dev)
-{
-	if (drm_core_has_AGP(dev) && dev->agp && dev->agp->cant_use_aperture) {
-		drm_map_t *map = drm_lookup_map(offset, size, dev);
-
-		if (map && map->type == _DRM_AGP)
-			return agp_remap(offset, size, dev);
-	}
-	return ioremap(offset, size);
-}
-
-static inline void *drm_ioremap_nocache(unsigned long offset,
-					unsigned long size, drm_device_t * dev)
-{
-	if (drm_core_has_AGP(dev) && dev->agp && dev->agp->cant_use_aperture) {
-		drm_map_t *map = drm_lookup_map(offset, size, dev);
-
-		if (map && map->type == _DRM_AGP)
-			return agp_remap(offset, size, dev);
-	}
-	return ioremap_nocache(offset, size);
-}
-
-static inline void drm_ioremapfree(void *pt, unsigned long size,
-				   drm_device_t * dev)
-{
-	/*
-	 * This is a bit ugly.  It would be much cleaner if the DRM API would use separate
-	 * routines for handling mappings in the AGP space.  Hopefully this can be done in
-	 * a future revision of the interface...
-	 */
-	if (drm_core_has_AGP(dev) && dev->agp && dev->agp->cant_use_aperture
-	    && ((unsigned long)pt >= VMALLOC_START
-		&& (unsigned long)pt < VMALLOC_END)) {
-		unsigned long offset;
-		drm_map_t *map;
-
-		offset = drm_follow_page(pt) | ((unsigned long)pt & ~PAGE_MASK);
-		map = drm_lookup_map(offset, size, dev);
-		if (map && map->type == _DRM_AGP) {
-			vunmap(pt);
-			return;
-		}
-	}
+void *drm_ioremap(unsigned long offset, unsigned long size,
+				drm_device_t * dev);
 
-	iounmap(pt);
-}
+void drm_ioremapfree(void *pt, unsigned long size,
+				   drm_device_t * dev);
diff --git a/drivers/char/drm/drm_memory_debug.h b/drivers/char/drm/drm_memory_debug.h
index 7868341817da..6543b9a14c42 100644
--- a/drivers/char/drm/drm_memory_debug.h
+++ b/drivers/char/drm/drm_memory_debug.h
@@ -229,6 +229,7 @@ void *drm_ioremap (unsigned long offset, unsigned long size,
 	return pt;
 }
 
+#if 0
 void *drm_ioremap_nocache (unsigned long offset, unsigned long size,
 			    drm_device_t * dev) {
 	void *pt;
@@ -251,6 +252,7 @@ void *drm_ioremap_nocache (unsigned long offset, unsigned long size,
 	spin_unlock(&drm_mem_lock);
 	return pt;
 }
+#endif  /*  0  */
 
 void drm_ioremapfree (void *pt, unsigned long size, drm_device_t * dev) {
 	int alloc_count;
diff --git a/drivers/char/drm/drm_pci.c b/drivers/char/drm/drm_pci.c
index b28ca9cea8a2..86a0f1c22091 100644
--- a/drivers/char/drm/drm_pci.c
+++ b/drivers/char/drm/drm_pci.c
@@ -37,6 +37,7 @@
  */
 
 #include <linux/pci.h>
+#include <linux/dma-mapping.h>
 #include "drmP.h"
 
 /**********************************************************************/
diff --git a/drivers/char/drm/drm_stub.c b/drivers/char/drm/drm_stub.c
index 68073e14fdec..9a842a36bb27 100644
--- a/drivers/char/drm/drm_stub.c
+++ b/drivers/char/drm/drm_stub.c
@@ -229,8 +229,6 @@ int drm_get_dev(struct pci_dev *pdev, const struct pci_device_id *ent,
 	return ret;
 }
 
-EXPORT_SYMBOL(drm_get_dev);
-
 /**
  * Put a device minor number.
  *
diff --git a/drivers/char/drm/r300_cmdbuf.c b/drivers/char/drm/r300_cmdbuf.c
index b108c7f913b2..26bdf2ca59d7 100644
--- a/drivers/char/drm/r300_cmdbuf.c
+++ b/drivers/char/drm/r300_cmdbuf.c
@@ -723,7 +723,7 @@ static int r300_scratch(drm_radeon_private_t *dev_priv,
 	
 	dev_priv->scratch_ages[header.scratch.reg]++;
 	
-	ref_age_base = *(u32 **)cmdbuf->buf;
+	ref_age_base =  (u32 *)(unsigned long)*((uint64_t *)cmdbuf->buf);
 	
 	cmdbuf->buf += sizeof(u64);
 	cmdbuf->bufsz -= sizeof(u64);
diff --git a/drivers/char/drm/via_irq.c b/drivers/char/drm/via_irq.c
index 6152415644e9..c33d068cde19 100644
--- a/drivers/char/drm/via_irq.c
+++ b/drivers/char/drm/via_irq.c
@@ -196,9 +196,9 @@ via_driver_irq_wait(drm_device_t * dev, unsigned int irq, int force_sequence,
 {
 	drm_via_private_t *dev_priv = (drm_via_private_t *) dev->dev_private;
 	unsigned int cur_irq_sequence;
-	drm_via_irq_t *cur_irq = dev_priv->via_irqs;
+	drm_via_irq_t *cur_irq;
 	int ret = 0;
-	maskarray_t *masks = dev_priv->irq_masks;
+	maskarray_t *masks;
 	int real_irq;
 
 	DRM_DEBUG("%s\n", __FUNCTION__);
@@ -221,8 +221,9 @@ via_driver_irq_wait(drm_device_t * dev, unsigned int irq, int force_sequence,
 			  __FUNCTION__, irq);
 		return DRM_ERR(EINVAL);
 	}
-	
-	cur_irq += real_irq;
+
+	masks = dev_priv->irq_masks;
+	cur_irq = dev_priv->via_irqs + real_irq;
 
 	if (masks[real_irq][2] && !force_sequence) {
 		DRM_WAIT_ON(ret, cur_irq->irq_queue, 3 * DRM_HZ,
@@ -247,11 +248,12 @@ void via_driver_irq_preinstall(drm_device_t * dev)
 {
 	drm_via_private_t *dev_priv = (drm_via_private_t *) dev->dev_private;
 	u32 status;
-	drm_via_irq_t *cur_irq = dev_priv->via_irqs;
+	drm_via_irq_t *cur_irq;
 	int i;
 
 	DRM_DEBUG("driver_irq_preinstall: dev_priv: %p\n", dev_priv);
 	if (dev_priv) {
+		cur_irq = dev_priv->via_irqs;
 
 		dev_priv->irq_enable_mask = VIA_IRQ_VBLANK_ENABLE;
 		dev_priv->irq_pending_mask = VIA_IRQ_VBLANK_PENDING;
diff --git a/drivers/char/genrtc.c b/drivers/char/genrtc.c
index d3a2bc36129b..588fca542a98 100644
--- a/drivers/char/genrtc.c
+++ b/drivers/char/genrtc.c
@@ -200,13 +200,13 @@ static ssize_t gen_rtc_read(struct file *file, char __user *buf,
 	/* first test allows optimizer to nuke this case for 32-bit machines */
 	if (sizeof (int) != sizeof (long) && count == sizeof (unsigned int)) {
 		unsigned int uidata = data;
-		retval = put_user(uidata, (unsigned long __user *)buf);
+		retval = put_user(uidata, (unsigned int __user *)buf) ?:
+			sizeof(unsigned int);
 	}
 	else {
-		retval = put_user(data, (unsigned long __user *)buf);
+		retval = put_user(data, (unsigned long __user *)buf) ?:
+			sizeof(unsigned long);
 	}
-	if (!retval)
-		retval = sizeof(unsigned long);
  out:
 	current->state = TASK_RUNNING;
 	remove_wait_queue(&gen_rtc_wait, &wait);
diff --git a/drivers/char/ipmi/ipmi_bt_sm.c b/drivers/char/ipmi/ipmi_bt_sm.c
index 58dcdee1cd71..0030cd8e2e95 100644
--- a/drivers/char/ipmi/ipmi_bt_sm.c
+++ b/drivers/char/ipmi/ipmi_bt_sm.c
@@ -165,7 +165,7 @@ static int bt_start_transaction(struct si_sm_data *bt,
 {
 	unsigned int i;
 
-	if ((size < 2) || (size > IPMI_MAX_MSG_LENGTH))
+	if ((size < 2) || (size > (IPMI_MAX_MSG_LENGTH - 2)))
 	       return -1;
 
 	if ((bt->state != BT_STATE_IDLE) && (bt->state != BT_STATE_HOSED))
diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
index a86c0f29953e..02a7dd7a8a55 100644
--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@@ -1184,20 +1184,20 @@ static void port_outl(struct si_sm_io *io, unsigned int offset,
 static void port_cleanup(struct smi_info *info)
 {
 	unsigned int addr = info->io.addr_data;
-	int          mapsize;
+	int          idx;
 
 	if (addr) {
-		mapsize = ((info->io_size * info->io.regspacing)
-			   - (info->io.regspacing - info->io.regsize));
-
-		release_region (addr, mapsize);
+	  	for (idx = 0; idx < info->io_size; idx++) {
+			release_region(addr + idx * info->io.regspacing,
+				       info->io.regsize);
+		}
 	}
 }
 
 static int port_setup(struct smi_info *info)
 {
 	unsigned int addr = info->io.addr_data;
-	int          mapsize;
+	int          idx;
 
 	if (!addr)
 		return -ENODEV;
@@ -1225,16 +1225,22 @@ static int port_setup(struct smi_info *info)
 		return -EINVAL;
 	}
 
-	/* Calculate the total amount of memory to claim.  This is an
-	 * unusual looking calculation, but it avoids claiming any
-	 * more memory than it has to.  It will claim everything
-	 * between the first address to the end of the last full
-	 * register. */
-	mapsize = ((info->io_size * info->io.regspacing)
-		   - (info->io.regspacing - info->io.regsize));
-
-	if (request_region(addr, mapsize, DEVICE_NAME) == NULL)
-		return -EIO;
+	/* Some BIOSes reserve disjoint I/O regions in their ACPI
+	 * tables.  This causes problems when trying to register the
+	 * entire I/O region.  Therefore we must register each I/O
+	 * port separately.
+	 */
+  	for (idx = 0; idx < info->io_size; idx++) {
+		if (request_region(addr + idx * info->io.regspacing,
+				   info->io.regsize, DEVICE_NAME) == NULL) {
+			/* Undo allocations */
+			while (idx--) {
+				release_region(addr + idx * info->io.regspacing,
+					       info->io.regsize);
+			}
+			return -EIO;
+		}
+	}
 	return 0;
 }
 
@@ -2198,11 +2204,11 @@ static inline void wait_for_timer_and_thread(struct smi_info *smi_info)
 	}
 }
 
-static struct ipmi_default_vals
+static __devinitdata struct ipmi_default_vals
 {
 	int type;
 	int port;
-} __devinit ipmi_defaults[] =
+} ipmi_defaults[] =
 {
 	{ .type = SI_KCS, .port = 0xca2 },
 	{ .type = SI_SMIC, .port = 0xca9 },
diff --git a/drivers/char/keyboard.c b/drivers/char/keyboard.c
index 935670a3cd98..5755b7e5f187 100644
--- a/drivers/char/keyboard.c
+++ b/drivers/char/keyboard.c
@@ -860,9 +860,32 @@ static void k_slock(struct vc_data *vc, unsigned char value, char up_flag, struc
 }
 
 /* by default, 300ms interval for combination release */
-static long brl_timeout = 300;
-MODULE_PARM_DESC(brl_timeout, "Braille keys release delay in ms (0 for combination on first release, < 0 for dead characters)");
-module_param(brl_timeout, long, 0644);
+static unsigned brl_timeout = 300;
+MODULE_PARM_DESC(brl_timeout, "Braille keys release delay in ms (0 for commit on first key release)");
+module_param(brl_timeout, uint, 0644);
+
+static unsigned brl_nbchords = 1;
+MODULE_PARM_DESC(brl_nbchords, "Number of chords that produce a braille pattern (0 for dead chords)");
+module_param(brl_nbchords, uint, 0644);
+
+static void k_brlcommit(struct vc_data *vc, unsigned int pattern, char up_flag, struct pt_regs *regs)
+{
+	static unsigned long chords;
+	static unsigned committed;
+
+	if (!brl_nbchords)
+		k_deadunicode(vc, BRL_UC_ROW | pattern, up_flag, regs);
+	else {
+		committed |= pattern;
+		chords++;
+		if (chords == brl_nbchords) {
+			k_unicode(vc, BRL_UC_ROW | committed, up_flag, regs);
+			chords = 0;
+			committed = 0;
+		}
+	}
+}
+
 static void k_brl(struct vc_data *vc, unsigned char value, char up_flag, struct pt_regs *regs)
 {
 	static unsigned pressed,committing;
@@ -882,11 +905,6 @@ static void k_brl(struct vc_data *vc, unsigned char value, char up_flag, struct
 	if (value > 8)
 		return;
 
-	if (brl_timeout < 0) {
-		k_deadunicode(vc, BRL_UC_ROW | (1 << (value - 1)), up_flag, regs);
-		return;
-	}
-
 	if (up_flag) {
 		if (brl_timeout) {
 			if (!committing ||
@@ -897,13 +915,13 @@ static void k_brl(struct vc_data *vc, unsigned char value, char up_flag, struct
 			pressed &= ~(1 << (value - 1));
 			if (!pressed) {
 				if (committing) {
-					k_unicode(vc, BRL_UC_ROW | committing, 0, regs);
+					k_brlcommit(vc, committing, 0, regs);
 					committing = 0;
 				}
 			}
 		} else {
 			if (committing) {
-				k_unicode(vc, BRL_UC_ROW | committing, 0, regs);
+				k_brlcommit(vc, committing, 0, regs);
 				committing = 0;
 			}
 			pressed &= ~(1 << (value - 1));
diff --git a/drivers/char/mem.c b/drivers/char/mem.c
index 66719f9d294c..1fa9fa157c12 100644
--- a/drivers/char/mem.c
+++ b/drivers/char/mem.c
@@ -27,6 +27,7 @@
 #include <linux/crash_dump.h>
 #include <linux/backing-dev.h>
 #include <linux/bootmem.h>
+#include <linux/pipe_fs_i.h>
 
 #include <asm/uaccess.h>
 #include <asm/io.h>
@@ -578,6 +579,18 @@ static ssize_t write_null(struct file * file, const char __user * buf,
 	return count;
 }
 
+static int pipe_to_null(struct pipe_inode_info *info, struct pipe_buffer *buf,
+			struct splice_desc *sd)
+{
+	return sd->len;
+}
+
+static ssize_t splice_write_null(struct pipe_inode_info *pipe,struct file *out,
+				 loff_t *ppos, size_t len, unsigned int flags)
+{
+	return splice_from_pipe(pipe, out, ppos, len, flags, pipe_to_null);
+}
+
 #ifdef CONFIG_MMU
 /*
  * For fun, we are using the MMU for this.
@@ -785,6 +798,7 @@ static struct file_operations null_fops = {
 	.llseek		= null_lseek,
 	.read		= read_null,
 	.write		= write_null,
+	.splice_write	= splice_write_null,
 };
 
 #if defined(CONFIG_ISA) || !defined(__mc68000__)
diff --git a/drivers/char/mwave/mwavedd.c b/drivers/char/mwave/mwavedd.c
index 8666171e187b..d3ba2f860ef0 100644
--- a/drivers/char/mwave/mwavedd.c
+++ b/drivers/char/mwave/mwavedd.c
@@ -271,7 +271,7 @@ static int mwave_ioctl(struct inode *inode, struct file *file,
 				ipcnum,
 				pDrvData->IPCs[ipcnum].usIntCount);
 	
-			if (ipcnum > ARRAY_SIZE(pDrvData->IPCs)) {
+			if (ipcnum >= ARRAY_SIZE(pDrvData->IPCs)) {
 				PRINTK_ERROR(KERN_ERR_MWAVE
 						"mwavedd::mwave_ioctl:"
 						" IOCTL_MW_REGISTER_IPC:"
diff --git a/drivers/char/pcmcia/cm4000_cs.c b/drivers/char/pcmcia/cm4000_cs.c
index 02114a0bd0d9..eab5394da666 100644
--- a/drivers/char/pcmcia/cm4000_cs.c
+++ b/drivers/char/pcmcia/cm4000_cs.c
@@ -149,7 +149,7 @@ struct cm4000_dev {
 #define	ZERO_DEV(dev)  						\
 	memset(&dev->atr_csum,0,				\
 		sizeof(struct cm4000_dev) - 			\
-		/*link*/ sizeof(struct pcmcia_device) - 	\
+		/*link*/ sizeof(struct pcmcia_device *) - 	\
 		/*node*/ sizeof(dev_node_t) - 			\
 		/*atr*/ MAX_ATR*sizeof(char) - 			\
 		/*rbuf*/ 512*sizeof(char) - 			\
@@ -1981,10 +1981,6 @@ static int __init cmm_init(void)
 	if (!cmm_class)
 		return -1;
 
-	rc = pcmcia_register_driver(&cm4000_driver);
-	if (rc < 0)
-		return rc;
-
 	major = register_chrdev(0, DEVICE_NAME, &cm4000_fops);
 	if (major < 0) {
 		printk(KERN_WARNING MODULE_NAME
@@ -1992,6 +1988,12 @@ static int __init cmm_init(void)
 		return -1;
 	}
 
+	rc = pcmcia_register_driver(&cm4000_driver);
+	if (rc < 0) {
+		unregister_chrdev(major, DEVICE_NAME);
+		return rc;
+	}
+
 	return 0;
 }
 
diff --git a/drivers/char/pcmcia/cm4040_cs.c b/drivers/char/pcmcia/cm4040_cs.c
index 29efa64580a8..47a8465bf95b 100644
--- a/drivers/char/pcmcia/cm4040_cs.c
+++ b/drivers/char/pcmcia/cm4040_cs.c
@@ -724,16 +724,19 @@ static int __init cm4040_init(void)
 	if (!cmx_class)
 		return -1;
 
-	rc = pcmcia_register_driver(&reader_driver);
-	if (rc < 0)
-		return rc;
-
 	major = register_chrdev(0, DEVICE_NAME, &reader_fops);
 	if (major < 0) {
 		printk(KERN_WARNING MODULE_NAME
 			": could not get major number\n");
 		return -1;
 	}
+
+	rc = pcmcia_register_driver(&reader_driver);
+	if (rc < 0) {
+		unregister_chrdev(major, DEVICE_NAME);
+		return rc;
+	}
+
 	return 0;
 }
 
diff --git a/drivers/char/rio/host.h b/drivers/char/rio/host.h
index 3ec73d1a279a..179cdbea712b 100644
--- a/drivers/char/rio/host.h
+++ b/drivers/char/rio/host.h
@@ -33,12 +33,6 @@
 #ifndef __rio_host_h__
 #define __rio_host_h__
 
-#ifdef SCCS_LABELS
-#ifndef lint
-static char *_host_h_sccs_ = "@(#)host.h	1.2";
-#endif
-#endif
-
 /*
 ** the host structure - one per host card in the system.
 */
@@ -77,9 +71,6 @@ struct Host {
 #define RC_STARTUP            1
 #define RC_RUNNING            2
 #define RC_STUFFED            3
-#define RC_SOMETHING          4
-#define RC_SOMETHING_NEW      5
-#define RC_SOMETHING_ELSE     6
 #define RC_READY              7
 #define RUN_STATE             7
 /*
diff --git a/drivers/char/rio/rioboot.c b/drivers/char/rio/rioboot.c
index acda9326c2ef..290143addd34 100644
--- a/drivers/char/rio/rioboot.c
+++ b/drivers/char/rio/rioboot.c
@@ -34,6 +34,7 @@
 #include <linux/slab.h>
 #include <linux/termios.h>
 #include <linux/serial.h>
+#include <linux/vmalloc.h>
 #include <asm/semaphore.h>
 #include <linux/generic_serial.h>
 #include <linux/errno.h>
diff --git a/drivers/char/rio/rioctrl.c b/drivers/char/rio/rioctrl.c
index d31aba62bb7f..75b2557c37ec 100644
--- a/drivers/char/rio/rioctrl.c
+++ b/drivers/char/rio/rioctrl.c
@@ -1394,14 +1394,17 @@ int RIOPreemptiveCmd(struct rio_info *p, struct Port *PortP, u8 Cmd)
 		return RIO_FAIL;
 	}
 
-	if (((int) ((char) PortP->InUse) == -1) || !(CmdBlkP = RIOGetCmdBlk())) {
-		rio_dprintk(RIO_DEBUG_CTRL, "Cannot allocate command block for command %d on port %d\n", Cmd, PortP->PortNum);
+	if ((PortP->InUse == (typeof(PortP->InUse))-1) ||
+			!(CmdBlkP = RIOGetCmdBlk())) {
+		rio_dprintk(RIO_DEBUG_CTRL, "Cannot allocate command block "
+			"for command %d on port %d\n", Cmd, PortP->PortNum);
 		return RIO_FAIL;
 	}
 
-	rio_dprintk(RIO_DEBUG_CTRL, "Command blk %p - InUse now %d\n", CmdBlkP, PortP->InUse);
+	rio_dprintk(RIO_DEBUG_CTRL, "Command blk %p - InUse now %d\n",
+			CmdBlkP, PortP->InUse);
 
-	PktCmdP = (struct PktCmd_M *) &CmdBlkP->Packet.data[0];
+	PktCmdP = (struct PktCmd_M *)&CmdBlkP->Packet.data[0];
 
 	CmdBlkP->Packet.src_unit = 0;
 	if (PortP->SecondBlock)
@@ -1425,38 +1428,46 @@ int RIOPreemptiveCmd(struct rio_info *p, struct Port *PortP, u8 Cmd)
 
 	switch (Cmd) {
 	case MEMDUMP:
-		rio_dprintk(RIO_DEBUG_CTRL, "Queue MEMDUMP command blk %p (addr 0x%x)\n", CmdBlkP, (int) SubCmd.Addr);
+		rio_dprintk(RIO_DEBUG_CTRL, "Queue MEMDUMP command blk %p "
+				"(addr 0x%x)\n", CmdBlkP, (int) SubCmd.Addr);
 		PktCmdP->SubCommand = MEMDUMP;
 		PktCmdP->SubAddr = SubCmd.Addr;
 		break;
 	case FCLOSE:
-		rio_dprintk(RIO_DEBUG_CTRL, "Queue FCLOSE command blk %p\n", CmdBlkP);
+		rio_dprintk(RIO_DEBUG_CTRL, "Queue FCLOSE command blk %p\n",
+				CmdBlkP);
 		break;
 	case READ_REGISTER:
-		rio_dprintk(RIO_DEBUG_CTRL, "Queue READ_REGISTER (0x%x) command blk %p\n", (int) SubCmd.Addr, CmdBlkP);
+		rio_dprintk(RIO_DEBUG_CTRL, "Queue READ_REGISTER (0x%x) "
+				"command blk %p\n", (int) SubCmd.Addr, CmdBlkP);
 		PktCmdP->SubCommand = READ_REGISTER;
 		PktCmdP->SubAddr = SubCmd.Addr;
 		break;
 	case RESUME:
-		rio_dprintk(RIO_DEBUG_CTRL, "Queue RESUME command blk %p\n", CmdBlkP);
+		rio_dprintk(RIO_DEBUG_CTRL, "Queue RESUME command blk %p\n",
+				CmdBlkP);
 		break;
 	case RFLUSH:
-		rio_dprintk(RIO_DEBUG_CTRL, "Queue RFLUSH command blk %p\n", CmdBlkP);
+		rio_dprintk(RIO_DEBUG_CTRL, "Queue RFLUSH command blk %p\n",
+				CmdBlkP);
 		CmdBlkP->PostFuncP = RIORFlushEnable;
 		break;
 	case SUSPEND:
-		rio_dprintk(RIO_DEBUG_CTRL, "Queue SUSPEND command blk %p\n", CmdBlkP);
+		rio_dprintk(RIO_DEBUG_CTRL, "Queue SUSPEND command blk %p\n",
+				CmdBlkP);
 		break;
 
 	case MGET:
-		rio_dprintk(RIO_DEBUG_CTRL, "Queue MGET command blk %p\n", CmdBlkP);
+		rio_dprintk(RIO_DEBUG_CTRL, "Queue MGET command blk %p\n",
+				CmdBlkP);
 		break;
 
 	case MSET:
 	case MBIC:
 	case MBIS:
 		CmdBlkP->Packet.data[4] = (char) PortP->ModemLines;
-		rio_dprintk(RIO_DEBUG_CTRL, "Queue MSET/MBIC/MBIS command blk %p\n", CmdBlkP);
+		rio_dprintk(RIO_DEBUG_CTRL, "Queue MSET/MBIC/MBIS command "
+				"blk %p\n", CmdBlkP);
 		break;
 
 	case WFLUSH:
@@ -1465,12 +1476,14 @@ int RIOPreemptiveCmd(struct rio_info *p, struct Port *PortP, u8 Cmd)
 		 ** allowed then we should not bother sending any more to the
 		 ** RTA.
 		 */
-		if ((int) ((char) PortP->WflushFlag) == (int) -1) {
-			rio_dprintk(RIO_DEBUG_CTRL, "Trashed WFLUSH, WflushFlag about to wrap!");
+		if (PortP->WflushFlag == (typeof(PortP->WflushFlag))-1) {
+			rio_dprintk(RIO_DEBUG_CTRL, "Trashed WFLUSH, "
+					"WflushFlag about to wrap!");
 			RIOFreeCmdBlk(CmdBlkP);
 			return (RIO_FAIL);
 		} else {
-			rio_dprintk(RIO_DEBUG_CTRL, "Queue WFLUSH command blk %p\n", CmdBlkP);
+			rio_dprintk(RIO_DEBUG_CTRL, "Queue WFLUSH command "
+					"blk %p\n", CmdBlkP);
 			CmdBlkP->PostFuncP = RIOWFlushMark;
 		}
 		break;
diff --git a/drivers/char/rio/rioioctl.h b/drivers/char/rio/rioioctl.h
index 14b83fae75c8..e8af5b30519e 100644
--- a/drivers/char/rio/rioioctl.h
+++ b/drivers/char/rio/rioioctl.h
@@ -33,10 +33,6 @@
 #ifndef	__rioioctl_h__
 #define	__rioioctl_h__
 
-#ifdef SCCS_LABELS
-static char *_rioioctl_h_sccs_ = "@(#)rioioctl.h	1.2";
-#endif
-
 /*
 ** RIO device driver - user ioctls and associated structures.
 */
@@ -44,55 +40,13 @@ static char *_rioioctl_h_sccs_ = "@(#)rioioctl.h	1.2";
 struct portStats {
 	int port;
 	int gather;
-	ulong txchars;
-	ulong rxchars;
-	ulong opens;
-	ulong closes;
-	ulong ioctls;
+	unsigned long txchars;
+	unsigned long rxchars;
+	unsigned long opens;
+	unsigned long closes;
+	unsigned long ioctls;
 };
 
-
-#define rIOC	('r'<<8)
-#define	TCRIOSTATE	(rIOC | 1)
-#define	TCRIOXPON	(rIOC | 2)
-#define	TCRIOXPOFF	(rIOC | 3)
-#define	TCRIOXPCPS	(rIOC | 4)
-#define	TCRIOXPRINT	(rIOC | 5)
-#define TCRIOIXANYON	(rIOC | 6)
-#define	TCRIOIXANYOFF	(rIOC | 7)
-#define TCRIOIXONON	(rIOC | 8)
-#define	TCRIOIXONOFF	(rIOC | 9)
-#define	TCRIOMBIS	(rIOC | 10)
-#define	TCRIOMBIC	(rIOC | 11)
-#define	TCRIOTRIAD	(rIOC | 12)
-#define TCRIOTSTATE	(rIOC | 13)
-
-/*
-** 15.10.1998 ARG - ESIL 0761 part fix
-** Add RIO ioctls for manipulating RTS and CTS flow control, (as LynxOS
-** appears to not support hardware flow control).
-*/
-#define TCRIOCTSFLOWEN	(rIOC | 14)	/* enable CTS flow control */
-#define TCRIOCTSFLOWDIS	(rIOC | 15)	/* disable CTS flow control */
-#define TCRIORTSFLOWEN	(rIOC | 16)	/* enable RTS flow control */
-#define TCRIORTSFLOWDIS	(rIOC | 17)	/* disable RTS flow control */
-
-/*
-** 09.12.1998 ARG - ESIL 0776 part fix
-** Definition for 'RIOC' also appears in daemon.h, so we'd better do a
-** #ifndef here first.
-** 'RIO_QUICK_CHECK' also #define'd here as this ioctl is now
-** allowed to be used by customers.
-**
-** 05.02.1999 ARG -
-** This is what I've decied to do with ioctls etc., which are intended to be
-** invoked from users applications :
-** Anything that needs to be defined here will be removed from daemon.h, that
-** way it won't end up having to be defined/maintained in two places. The only
-** consequence of this is that this file should now be #include'd by daemon.h
-**
-** 'stats' ioctls now #define'd here as they are to be used by customers.
-*/
 #define	RIOC	('R'<<8)|('i'<<16)|('o'<<24)
 
 #define	RIO_QUICK_CHECK	  	(RIOC | 105)
diff --git a/drivers/char/snsc.c b/drivers/char/snsc.c
index b543821d8cb4..56c8243cdb73 100644
--- a/drivers/char/snsc.c
+++ b/drivers/char/snsc.c
@@ -390,7 +390,8 @@ scdrv_init(void)
 			format_module_id(devnamep, geo_module(geoid),
 					 MODULE_FORMAT_BRIEF);
 			devnamep = devname + strlen(devname);
-			sprintf(devnamep, "#%d", geo_slab(geoid));
+			sprintf(devnamep, "^%d#%d", geo_slot(geoid),
+				geo_slab(geoid));
 
 			/* allocate sysctl device data */
 			scd = kzalloc(sizeof (struct sysctl_data_s),
diff --git a/drivers/char/sonypi.c b/drivers/char/sonypi.c
index f8dd8527c6aa..a90f5d97df35 100644
--- a/drivers/char/sonypi.c
+++ b/drivers/char/sonypi.c
@@ -1341,6 +1341,9 @@ static int __devinit sonypi_probe(struct platform_device *dev)
 	else if ((pcidev = pci_get_device(PCI_VENDOR_ID_INTEL,
 					  PCI_DEVICE_ID_INTEL_ICH6_1, NULL)))
 		sonypi_device.model = SONYPI_DEVICE_MODEL_TYPE3;
+	else if ((pcidev = pci_get_device(PCI_VENDOR_ID_INTEL,
+					  PCI_DEVICE_ID_INTEL_ICH7_1, NULL)))
+		sonypi_device.model = SONYPI_DEVICE_MODEL_TYPE3;
 	else
 		sonypi_device.model = SONYPI_DEVICE_MODEL_TYPE2;
 
diff --git a/drivers/char/tipar.c b/drivers/char/tipar.c
index eb2eb3e12d6a..079db5a935a1 100644
--- a/drivers/char/tipar.c
+++ b/drivers/char/tipar.c
@@ -515,7 +515,7 @@ tipar_init_module(void)
 		err = PTR_ERR(tipar_class);
 		goto out_chrdev;
 	}
-	if (parport_register_driver(&tipar_driver) || tp_count == 0) {
+	if (parport_register_driver(&tipar_driver)) {
 		printk(KERN_ERR "tipar: unable to register with parport\n");
 		err = -EIO;
 		goto out_class;
diff --git a/drivers/char/tpm/Kconfig b/drivers/char/tpm/Kconfig
index a6873bf89ffa..fe00c7dfb649 100644
--- a/drivers/char/tpm/Kconfig
+++ b/drivers/char/tpm/Kconfig
@@ -20,9 +20,18 @@ config TCG_TPM
 	  Note: For more TPM drivers enable CONFIG_PNP, CONFIG_ACPI
 	  and CONFIG_PNPACPI.
 
+config TCG_TIS
+	tristate "TPM Interface Specification 1.2 Interface"
+	depends on TCG_TPM && PNPACPI
+	---help---
+	  If you have a TPM security chip that is compliant with the
+	  TCG TIS 1.2 TPM specification say Yes and it will be accessible
+	  from within Linux.  To compile this driver as a module, choose
+	  M here; the module will be called tpm_tis.
+
 config TCG_NSC
 	tristate "National Semiconductor TPM Interface"
-	depends on TCG_TPM
+	depends on TCG_TPM && PNPACPI
 	---help---
 	  If you have a TPM security chip from National Semicondutor 
 	  say Yes and it will be accessible from within Linux.  To 
diff --git a/drivers/char/tpm/Makefile b/drivers/char/tpm/Makefile
index ba4582d160fd..ea3a1e02a824 100644
--- a/drivers/char/tpm/Makefile
+++ b/drivers/char/tpm/Makefile
@@ -5,6 +5,7 @@ obj-$(CONFIG_TCG_TPM) += tpm.o
 ifdef CONFIG_ACPI
 	obj-$(CONFIG_TCG_TPM) += tpm_bios.o
 endif
+obj-$(CONFIG_TCG_TIS) += tpm_tis.o
 obj-$(CONFIG_TCG_NSC) += tpm_nsc.o
 obj-$(CONFIG_TCG_ATMEL) += tpm_atmel.o
 obj-$(CONFIG_TCG_INFINEON) += tpm_infineon.o
diff --git a/drivers/char/tpm/tpm.c b/drivers/char/tpm/tpm.c
index 5a3870477ef1..6889e7db3aff 100644
--- a/drivers/char/tpm/tpm.c
+++ b/drivers/char/tpm/tpm.c
@@ -32,12 +32,291 @@ enum tpm_const {
 	TPM_MINOR = 224,	/* officially assigned */
 	TPM_BUFSIZE = 2048,
 	TPM_NUM_DEVICES = 256,
-	TPM_NUM_MASK_ENTRIES = TPM_NUM_DEVICES / (8 * sizeof(int))
 };
 
+enum tpm_duration {
+	TPM_SHORT = 0,
+	TPM_MEDIUM = 1,
+	TPM_LONG = 2,
+	TPM_UNDEFINED,
+};
+
+#define TPM_MAX_ORDINAL 243
+#define TPM_MAX_PROTECTED_ORDINAL 12
+#define TPM_PROTECTED_ORDINAL_MASK 0xFF
+
 static LIST_HEAD(tpm_chip_list);
 static DEFINE_SPINLOCK(driver_lock);
-static int dev_mask[TPM_NUM_MASK_ENTRIES];
+static DECLARE_BITMAP(dev_mask, TPM_NUM_DEVICES);
+
+/*
+ * Array with one entry per ordinal defining the maximum amount
+ * of time the chip could take to return the result.  The ordinal
+ * designation of short, medium or long is defined in a table in
+ * TCG Specification TPM Main Part 2 TPM Structures Section 17. The
+ * values of the SHORT, MEDIUM, and LONG durations are retrieved
+ * from the chip during initialization with a call to tpm_get_timeouts.
+ */
+static const u8 tpm_protected_ordinal_duration[TPM_MAX_PROTECTED_ORDINAL] = {
+	TPM_UNDEFINED,		/* 0 */
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,		/* 5 */
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_SHORT,		/* 10 */
+	TPM_SHORT,
+};
+
+static const u8 tpm_ordinal_duration[TPM_MAX_ORDINAL] = {
+	TPM_UNDEFINED,		/* 0 */
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,		/* 5 */
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_SHORT,		/* 10 */
+	TPM_SHORT,
+	TPM_MEDIUM,
+	TPM_LONG,
+	TPM_LONG,
+	TPM_MEDIUM,		/* 15 */
+	TPM_SHORT,
+	TPM_SHORT,
+	TPM_MEDIUM,
+	TPM_LONG,
+	TPM_SHORT,		/* 20 */
+	TPM_SHORT,
+	TPM_MEDIUM,
+	TPM_MEDIUM,
+	TPM_MEDIUM,
+	TPM_SHORT,		/* 25 */
+	TPM_SHORT,
+	TPM_MEDIUM,
+	TPM_SHORT,
+	TPM_SHORT,
+	TPM_MEDIUM,		/* 30 */
+	TPM_LONG,
+	TPM_MEDIUM,
+	TPM_SHORT,
+	TPM_SHORT,
+	TPM_SHORT,		/* 35 */
+	TPM_MEDIUM,
+	TPM_MEDIUM,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_MEDIUM,		/* 40 */
+	TPM_LONG,
+	TPM_MEDIUM,
+	TPM_SHORT,
+	TPM_SHORT,
+	TPM_SHORT,		/* 45 */
+	TPM_SHORT,
+	TPM_SHORT,
+	TPM_SHORT,
+	TPM_LONG,
+	TPM_MEDIUM,		/* 50 */
+	TPM_MEDIUM,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,		/* 55 */
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_MEDIUM,		/* 60 */
+	TPM_MEDIUM,
+	TPM_MEDIUM,
+	TPM_SHORT,
+	TPM_SHORT,
+	TPM_MEDIUM,		/* 65 */
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_SHORT,		/* 70 */
+	TPM_SHORT,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,		/* 75 */
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_LONG,		/* 80 */
+	TPM_UNDEFINED,
+	TPM_MEDIUM,
+	TPM_LONG,
+	TPM_SHORT,
+	TPM_UNDEFINED,		/* 85 */
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_SHORT,		/* 90 */
+	TPM_SHORT,
+	TPM_SHORT,
+	TPM_SHORT,
+	TPM_SHORT,
+	TPM_UNDEFINED,		/* 95 */
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_MEDIUM,		/* 100 */
+	TPM_SHORT,
+	TPM_SHORT,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,		/* 105 */
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_SHORT,		/* 110 */
+	TPM_SHORT,
+	TPM_SHORT,
+	TPM_SHORT,
+	TPM_SHORT,
+	TPM_SHORT,		/* 115 */
+	TPM_SHORT,
+	TPM_SHORT,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_LONG,		/* 120 */
+	TPM_LONG,
+	TPM_MEDIUM,
+	TPM_UNDEFINED,
+	TPM_SHORT,
+	TPM_SHORT,		/* 125 */
+	TPM_SHORT,
+	TPM_LONG,
+	TPM_SHORT,
+	TPM_SHORT,
+	TPM_SHORT,		/* 130 */
+	TPM_MEDIUM,
+	TPM_UNDEFINED,
+	TPM_SHORT,
+	TPM_MEDIUM,
+	TPM_UNDEFINED,		/* 135 */
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_SHORT,		/* 140 */
+	TPM_SHORT,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,		/* 145 */
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_SHORT,		/* 150 */
+	TPM_MEDIUM,
+	TPM_MEDIUM,
+	TPM_SHORT,
+	TPM_SHORT,
+	TPM_UNDEFINED,		/* 155 */
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_SHORT,		/* 160 */
+	TPM_SHORT,
+	TPM_SHORT,
+	TPM_SHORT,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,		/* 165 */
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_LONG,		/* 170 */
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,		/* 175 */
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_MEDIUM,		/* 180 */
+	TPM_SHORT,
+	TPM_MEDIUM,
+	TPM_MEDIUM,
+	TPM_MEDIUM,
+	TPM_MEDIUM,		/* 185 */
+	TPM_SHORT,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,		/* 190 */
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,		/* 195 */
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_SHORT,		/* 200 */
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_SHORT,
+	TPM_SHORT,		/* 205 */
+	TPM_SHORT,
+	TPM_SHORT,
+	TPM_SHORT,
+	TPM_SHORT,
+	TPM_MEDIUM,		/* 210 */
+	TPM_UNDEFINED,
+	TPM_MEDIUM,
+	TPM_MEDIUM,
+	TPM_MEDIUM,
+	TPM_UNDEFINED,		/* 215 */
+	TPM_MEDIUM,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_SHORT,
+	TPM_SHORT,		/* 220 */
+	TPM_SHORT,
+	TPM_SHORT,
+	TPM_SHORT,
+	TPM_SHORT,
+	TPM_UNDEFINED,		/* 225 */
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_SHORT,		/* 230 */
+	TPM_LONG,
+	TPM_MEDIUM,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,		/* 235 */
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_UNDEFINED,
+	TPM_SHORT,		/* 240 */
+	TPM_UNDEFINED,
+	TPM_MEDIUM,
+};
 
 static void user_reader_timeout(unsigned long ptr)
 {
@@ -46,7 +325,7 @@ static void user_reader_timeout(unsigned long ptr)
 	schedule_work(&chip->work);
 }
 
-static void timeout_work(void * ptr)
+static void timeout_work(void *ptr)
 {
 	struct tpm_chip *chip = ptr;
 
@@ -57,17 +336,43 @@ static void timeout_work(void * ptr)
 }
 
 /*
+ * Returns max number of jiffies to wait
+ */
+unsigned long tpm_calc_ordinal_duration(struct tpm_chip *chip,
+					   u32 ordinal)
+{
+	int duration_idx = TPM_UNDEFINED;
+	int duration = 0;
+
+	if (ordinal < TPM_MAX_ORDINAL)
+		duration_idx = tpm_ordinal_duration[ordinal];
+	else if ((ordinal & TPM_PROTECTED_ORDINAL_MASK) <
+		 TPM_MAX_PROTECTED_ORDINAL)
+		duration_idx =
+		    tpm_protected_ordinal_duration[ordinal &
+						   TPM_PROTECTED_ORDINAL_MASK];
+
+	if (duration_idx != TPM_UNDEFINED)
+		duration = chip->vendor.duration[duration_idx];
+	if (duration <= 0)
+		return 2 * 60 * HZ;
+	else
+		return duration;
+}
+EXPORT_SYMBOL_GPL(tpm_calc_ordinal_duration);
+
+/*
  * Internal kernel interface to transmit TPM commands
  */
 static ssize_t tpm_transmit(struct tpm_chip *chip, const char *buf,
 			    size_t bufsiz)
 {
 	ssize_t rc;
-	u32 count;
+	u32 count, ordinal;
 	unsigned long stop;
 
 	count = be32_to_cpu(*((__be32 *) (buf + 2)));
-
+	ordinal = be32_to_cpu(*((__be32 *) (buf + 6)));
 	if (count == 0)
 		return -ENODATA;
 	if (count > bufsiz) {
@@ -78,21 +383,23 @@ static ssize_t tpm_transmit(struct tpm_chip *chip, const char *buf,
 
 	down(&chip->tpm_mutex);
 
-	if ((rc = chip->vendor->send(chip, (u8 *) buf, count)) < 0) {
+	if ((rc = chip->vendor.send(chip, (u8 *) buf, count)) < 0) {
 		dev_err(chip->dev,
 			"tpm_transmit: tpm_send: error %zd\n", rc);
 		goto out;
 	}
 
-	stop = jiffies + 2 * 60 * HZ;
+	if (chip->vendor.irq)
+		goto out_recv;
+
+	stop = jiffies + tpm_calc_ordinal_duration(chip, ordinal);
 	do {
-		u8 status = chip->vendor->status(chip);
-		if ((status & chip->vendor->req_complete_mask) ==
-		    chip->vendor->req_complete_val) {
+		u8 status = chip->vendor.status(chip);
+		if ((status & chip->vendor.req_complete_mask) ==
+		    chip->vendor.req_complete_val)
 			goto out_recv;
-		}
 
-		if ((status == chip->vendor->req_canceled)) {
+		if ((status == chip->vendor.req_canceled)) {
 			dev_err(chip->dev, "Operation Canceled\n");
 			rc = -ECANCELED;
 			goto out;
@@ -102,14 +409,13 @@ static ssize_t tpm_transmit(struct tpm_chip *chip, const char *buf,
 		rmb();
 	} while (time_before(jiffies, stop));
 
-
-	chip->vendor->cancel(chip);
+	chip->vendor.cancel(chip);
 	dev_err(chip->dev, "Operation Timed out\n");
 	rc = -ETIME;
 	goto out;
 
 out_recv:
-	rc = chip->vendor->recv(chip, (u8 *) buf, bufsiz);
+	rc = chip->vendor.recv(chip, (u8 *) buf, bufsiz);
 	if (rc < 0)
 		dev_err(chip->dev,
 			"tpm_transmit: tpm_recv: error %zd\n", rc);
@@ -119,17 +425,247 @@ out:
 }
 
 #define TPM_DIGEST_SIZE 20
-#define CAP_PCR_RESULT_SIZE 18
-static const u8 cap_pcr[] = {
+#define TPM_ERROR_SIZE 10
+#define TPM_RET_CODE_IDX 6
+#define TPM_GET_CAP_RET_SIZE_IDX 10
+#define TPM_GET_CAP_RET_UINT32_1_IDX 14
+#define TPM_GET_CAP_RET_UINT32_2_IDX 18
+#define TPM_GET_CAP_RET_UINT32_3_IDX 22
+#define TPM_GET_CAP_RET_UINT32_4_IDX 26
+#define TPM_GET_CAP_PERM_DISABLE_IDX 16
+#define TPM_GET_CAP_PERM_INACTIVE_IDX 18
+#define TPM_GET_CAP_RET_BOOL_1_IDX 14
+#define TPM_GET_CAP_TEMP_INACTIVE_IDX 16
+
+#define TPM_CAP_IDX 13
+#define TPM_CAP_SUBCAP_IDX 21
+
+enum tpm_capabilities {
+	TPM_CAP_FLAG = 4,
+	TPM_CAP_PROP = 5,
+};
+
+enum tpm_sub_capabilities {
+	TPM_CAP_PROP_PCR = 0x1,
+	TPM_CAP_PROP_MANUFACTURER = 0x3,
+	TPM_CAP_FLAG_PERM = 0x8,
+	TPM_CAP_FLAG_VOL = 0x9,
+	TPM_CAP_PROP_OWNER = 0x11,
+	TPM_CAP_PROP_TIS_TIMEOUT = 0x15,
+	TPM_CAP_PROP_TIS_DURATION = 0x20,
+};
+
+/*
+ * This is a semi generic GetCapability command for use
+ * with the capability type TPM_CAP_PROP or TPM_CAP_FLAG
+ * and their associated sub_capabilities.
+ */
+
+static const u8 tpm_cap[] = {
 	0, 193,			/* TPM_TAG_RQU_COMMAND */
 	0, 0, 0, 22,		/* length */
 	0, 0, 0, 101,		/* TPM_ORD_GetCapability */
-	0, 0, 0, 5,
-	0, 0, 0, 4,
-	0, 0, 1, 1
+	0, 0, 0, 0,		/* TPM_CAP_<TYPE> */
+	0, 0, 0, 4,		/* TPM_CAP_SUB_<TYPE> size */
+	0, 0, 1, 0		/* TPM_CAP_SUB_<TYPE> */
 };
 
-#define READ_PCR_RESULT_SIZE 30
+static ssize_t transmit_cmd(struct tpm_chip *chip, u8 *data, int len,
+			    char *desc)
+{
+	int err;
+
+	len = tpm_transmit(chip, data, len);
+	if (len <  0)
+		return len;
+	if (len == TPM_ERROR_SIZE) {
+		err = be32_to_cpu(*((__be32 *) (data + TPM_RET_CODE_IDX)));
+		dev_dbg(chip->dev, "A TPM error (%d) occurred %s\n", err, desc);
+		return err;
+	}
+	return 0;
+}
+
+void tpm_gen_interrupt(struct tpm_chip *chip)
+{
+	u8 data[max_t(int, ARRAY_SIZE(tpm_cap), 30)];
+	ssize_t rc;
+
+	memcpy(data, tpm_cap, sizeof(tpm_cap));
+	data[TPM_CAP_IDX] = TPM_CAP_PROP;
+	data[TPM_CAP_SUBCAP_IDX] = TPM_CAP_PROP_TIS_TIMEOUT;
+
+	rc = transmit_cmd(chip, data, sizeof(data),
+			"attempting to determine the timeouts");
+}
+EXPORT_SYMBOL_GPL(tpm_gen_interrupt);
+
+void tpm_get_timeouts(struct tpm_chip *chip)
+{
+	u8 data[max_t(int, ARRAY_SIZE(tpm_cap), 30)];
+	ssize_t rc;
+	u32 timeout;
+
+	memcpy(data, tpm_cap, sizeof(tpm_cap));
+	data[TPM_CAP_IDX] = TPM_CAP_PROP;
+	data[TPM_CAP_SUBCAP_IDX] = TPM_CAP_PROP_TIS_TIMEOUT;
+
+	rc = transmit_cmd(chip, data, sizeof(data),
+			"attempting to determine the timeouts");
+	if (rc)
+		goto duration;
+
+	if (be32_to_cpu(*((__be32 *) (data + TPM_GET_CAP_RET_SIZE_IDX)))
+	    != 4 * sizeof(u32))
+		goto duration;
+
+	/* Don't overwrite default if value is 0 */
+	timeout =
+	    be32_to_cpu(*((__be32 *) (data + TPM_GET_CAP_RET_UINT32_1_IDX)));
+	if (timeout)
+		chip->vendor.timeout_a = msecs_to_jiffies(timeout);
+	timeout =
+	    be32_to_cpu(*((__be32 *) (data + TPM_GET_CAP_RET_UINT32_2_IDX)));
+	if (timeout)
+		chip->vendor.timeout_b = msecs_to_jiffies(timeout);
+	timeout =
+	    be32_to_cpu(*((__be32 *) (data + TPM_GET_CAP_RET_UINT32_3_IDX)));
+	if (timeout)
+		chip->vendor.timeout_c = msecs_to_jiffies(timeout);
+	timeout =
+	    be32_to_cpu(*((__be32 *) (data + TPM_GET_CAP_RET_UINT32_4_IDX)));
+	if (timeout)
+		chip->vendor.timeout_d = msecs_to_jiffies(timeout);
+
+duration:
+	memcpy(data, tpm_cap, sizeof(tpm_cap));
+	data[TPM_CAP_IDX] = TPM_CAP_PROP;
+	data[TPM_CAP_SUBCAP_IDX] = TPM_CAP_PROP_TIS_DURATION;
+
+	rc = transmit_cmd(chip, data, sizeof(data),
+			"attempting to determine the durations");
+	if (rc)
+		return;
+
+	if (be32_to_cpu(*((__be32 *) (data + TPM_GET_CAP_RET_SIZE_IDX)))
+	    != 3 * sizeof(u32))
+		return;
+
+	chip->vendor.duration[TPM_SHORT] =
+	    msecs_to_jiffies(be32_to_cpu
+			     (*((__be32 *) (data +
+					    TPM_GET_CAP_RET_UINT32_1_IDX))));
+	chip->vendor.duration[TPM_MEDIUM] =
+	    msecs_to_jiffies(be32_to_cpu
+			     (*((__be32 *) (data +
+					    TPM_GET_CAP_RET_UINT32_2_IDX))));
+	chip->vendor.duration[TPM_LONG] =
+	    msecs_to_jiffies(be32_to_cpu
+			     (*((__be32 *) (data +
+					    TPM_GET_CAP_RET_UINT32_3_IDX))));
+}
+EXPORT_SYMBOL_GPL(tpm_get_timeouts);
+
+void tpm_continue_selftest(struct tpm_chip *chip)
+{
+	u8 data[] = {
+		0, 193,			/* TPM_TAG_RQU_COMMAND */
+		0, 0, 0, 10,		/* length */
+		0, 0, 0, 83,		/* TPM_ORD_GetCapability */
+	};
+
+	tpm_transmit(chip, data, sizeof(data));
+}
+EXPORT_SYMBOL_GPL(tpm_continue_selftest);
+
+ssize_t tpm_show_enabled(struct device * dev, struct device_attribute * attr,
+			char *buf)
+{
+	u8 data[max_t(int, ARRAY_SIZE(tpm_cap), 35)];
+	ssize_t rc;
+
+	struct tpm_chip *chip = dev_get_drvdata(dev);
+	if (chip == NULL)
+		return -ENODEV;
+
+	memcpy(data, tpm_cap, sizeof(tpm_cap));
+	data[TPM_CAP_IDX] = TPM_CAP_FLAG;
+	data[TPM_CAP_SUBCAP_IDX] = TPM_CAP_FLAG_PERM;
+
+	rc = transmit_cmd(chip, data, sizeof(data),
+			"attemtping to determine the permanent state");
+	if (rc)
+		return 0;
+	return sprintf(buf, "%d\n", !data[TPM_GET_CAP_PERM_DISABLE_IDX]);
+}
+EXPORT_SYMBOL_GPL(tpm_show_enabled);
+
+ssize_t tpm_show_active(struct device * dev, struct device_attribute * attr,
+			char *buf)
+{
+	u8 data[max_t(int, ARRAY_SIZE(tpm_cap), 35)];
+	ssize_t rc;
+
+	struct tpm_chip *chip = dev_get_drvdata(dev);
+	if (chip == NULL)
+		return -ENODEV;
+
+	memcpy(data, tpm_cap, sizeof(tpm_cap));
+	data[TPM_CAP_IDX] = TPM_CAP_FLAG;
+	data[TPM_CAP_SUBCAP_IDX] = TPM_CAP_FLAG_PERM;
+
+	rc = transmit_cmd(chip, data, sizeof(data),
+			"attemtping to determine the permanent state");
+	if (rc)
+		return 0;
+	return sprintf(buf, "%d\n", !data[TPM_GET_CAP_PERM_INACTIVE_IDX]);
+}
+EXPORT_SYMBOL_GPL(tpm_show_active);
+
+ssize_t tpm_show_owned(struct device * dev, struct device_attribute * attr,
+			char *buf)
+{
+	u8 data[sizeof(tpm_cap)];
+	ssize_t rc;
+
+	struct tpm_chip *chip = dev_get_drvdata(dev);
+	if (chip == NULL)
+		return -ENODEV;
+
+	memcpy(data, tpm_cap, sizeof(tpm_cap));
+	data[TPM_CAP_IDX] = TPM_CAP_PROP;
+	data[TPM_CAP_SUBCAP_IDX] = TPM_CAP_PROP_OWNER;
+
+	rc = transmit_cmd(chip, data, sizeof(data),
+			"attempting to determine the owner state");
+	if (rc)
+		return 0;
+	return sprintf(buf, "%d\n", data[TPM_GET_CAP_RET_BOOL_1_IDX]);
+}
+EXPORT_SYMBOL_GPL(tpm_show_owned);
+
+ssize_t tpm_show_temp_deactivated(struct device * dev,
+				struct device_attribute * attr, char *buf)
+{
+	u8 data[sizeof(tpm_cap)];
+	ssize_t rc;
+
+	struct tpm_chip *chip = dev_get_drvdata(dev);
+	if (chip == NULL)
+		return -ENODEV;
+
+	memcpy(data, tpm_cap, sizeof(tpm_cap));
+	data[TPM_CAP_IDX] = TPM_CAP_FLAG;
+	data[TPM_CAP_SUBCAP_IDX] = TPM_CAP_FLAG_VOL;
+
+	rc = transmit_cmd(chip, data, sizeof(data),
+			"attempting to determine the temporary state");
+	if (rc)
+		return 0;
+	return sprintf(buf, "%d\n", data[TPM_GET_CAP_TEMP_INACTIVE_IDX]);
+}
+EXPORT_SYMBOL_GPL(tpm_show_temp_deactivated);
+
 static const u8 pcrread[] = {
 	0, 193,			/* TPM_TAG_RQU_COMMAND */
 	0, 0, 0, 14,		/* length */
@@ -140,8 +676,8 @@ static const u8 pcrread[] = {
 ssize_t tpm_show_pcrs(struct device *dev, struct device_attribute *attr,
 		      char *buf)
 {
-	u8 data[READ_PCR_RESULT_SIZE];
-	ssize_t len;
+	u8 data[max_t(int, max(ARRAY_SIZE(tpm_cap), ARRAY_SIZE(pcrread)), 30)];
+	ssize_t rc;
 	int i, j, num_pcrs;
 	__be32 index;
 	char *str = buf;
@@ -150,29 +686,24 @@ ssize_t tpm_show_pcrs(struct device *dev, struct device_attribute *attr,
 	if (chip == NULL)
 		return -ENODEV;
 
-	memcpy(data, cap_pcr, sizeof(cap_pcr));
-	if ((len = tpm_transmit(chip, data, sizeof(data)))
-	    < CAP_PCR_RESULT_SIZE) {
-		dev_dbg(chip->dev, "A TPM error (%d) occurred "
-				"attempting to determine the number of PCRS\n",
-			be32_to_cpu(*((__be32 *) (data + 6))));
+	memcpy(data, tpm_cap, sizeof(tpm_cap));
+	data[TPM_CAP_IDX] = TPM_CAP_PROP;
+	data[TPM_CAP_SUBCAP_IDX] = TPM_CAP_PROP_PCR;
+
+	rc = transmit_cmd(chip, data, sizeof(data),
+			"attempting to determine the number of PCRS");
+	if (rc)
 		return 0;
-	}
 
 	num_pcrs = be32_to_cpu(*((__be32 *) (data + 14)));
-
 	for (i = 0; i < num_pcrs; i++) {
 		memcpy(data, pcrread, sizeof(pcrread));
 		index = cpu_to_be32(i);
 		memcpy(data + 10, &index, 4);
-		if ((len = tpm_transmit(chip, data, sizeof(data)))
-		    < READ_PCR_RESULT_SIZE){
-			dev_dbg(chip->dev, "A TPM error (%d) occurred"
-				" attempting to read PCR %d of %d\n",
-				be32_to_cpu(*((__be32 *) (data + 6))),
-				i, num_pcrs);
+		rc = transmit_cmd(chip, data, sizeof(data),
+				"attempting to read a PCR");
+		if (rc)
 			goto out;
-		}
 		str += sprintf(str, "PCR-%02d: ", i);
 		for (j = 0; j < TPM_DIGEST_SIZE; j++)
 			str += sprintf(str, "%02X ", *(data + 10 + j));
@@ -194,7 +725,7 @@ ssize_t tpm_show_pubek(struct device *dev, struct device_attribute *attr,
 		       char *buf)
 {
 	u8 *data;
-	ssize_t len;
+	ssize_t err;
 	int i, rc;
 	char *str = buf;
 
@@ -208,14 +739,10 @@ ssize_t tpm_show_pubek(struct device *dev, struct device_attribute *attr,
 
 	memcpy(data, readpubek, sizeof(readpubek));
 
-	if ((len = tpm_transmit(chip, data, READ_PUBEK_RESULT_SIZE)) <
-	    READ_PUBEK_RESULT_SIZE) {
-		dev_dbg(chip->dev, "A TPM error (%d) occurred "
-				"attempting to read the PUBEK\n",
-			    be32_to_cpu(*((__be32 *) (data + 6))));
-		rc = 0;
+	err = transmit_cmd(chip, data, READ_PUBEK_RESULT_SIZE,
+			"attempting to read the PUBEK");
+	if (err)
 		goto out;
-	}
 
 	/* 
 	   ignore header 10 bytes
@@ -245,67 +772,110 @@ ssize_t tpm_show_pubek(struct device *dev, struct device_attribute *attr,
 		if ((i + 1) % 16 == 0)
 			str += sprintf(str, "\n");
 	}
-	rc = str - buf;
 out:
+	rc = str - buf;
 	kfree(data);
 	return rc;
 }
 EXPORT_SYMBOL_GPL(tpm_show_pubek);
 
-#define CAP_VER_RESULT_SIZE 18
+#define CAP_VERSION_1_1 6
+#define CAP_VERSION_1_2 0x1A
+#define CAP_VERSION_IDX 13
 static const u8 cap_version[] = {
 	0, 193,			/* TPM_TAG_RQU_COMMAND */
 	0, 0, 0, 18,		/* length */
 	0, 0, 0, 101,		/* TPM_ORD_GetCapability */
-	0, 0, 0, 6,
+	0, 0, 0, 0,
 	0, 0, 0, 0
 };
 
-#define CAP_MANUFACTURER_RESULT_SIZE 18
-static const u8 cap_manufacturer[] = {
-	0, 193,			/* TPM_TAG_RQU_COMMAND */
-	0, 0, 0, 22,		/* length */
-	0, 0, 0, 101,		/* TPM_ORD_GetCapability */
-	0, 0, 0, 5,
-	0, 0, 0, 4,
-	0, 0, 1, 3
-};
-
 ssize_t tpm_show_caps(struct device *dev, struct device_attribute *attr,
 		      char *buf)
 {
-	u8 data[sizeof(cap_manufacturer)];
-	ssize_t len;
+	u8 data[max_t(int, max(ARRAY_SIZE(tpm_cap), ARRAY_SIZE(cap_version)), 30)];
+	ssize_t rc;
 	char *str = buf;
 
 	struct tpm_chip *chip = dev_get_drvdata(dev);
 	if (chip == NULL)
 		return -ENODEV;
 
-	memcpy(data, cap_manufacturer, sizeof(cap_manufacturer));
+	memcpy(data, tpm_cap, sizeof(tpm_cap));
+	data[TPM_CAP_IDX] = TPM_CAP_PROP;
+	data[TPM_CAP_SUBCAP_IDX] = TPM_CAP_PROP_MANUFACTURER;
 
-	if ((len = tpm_transmit(chip, data, sizeof(data))) <
-	    CAP_MANUFACTURER_RESULT_SIZE)
-		return len;
+	rc = transmit_cmd(chip, data, sizeof(data),
+			"attempting to determine the manufacturer");
+	if (rc)
+		return 0;
 
 	str += sprintf(str, "Manufacturer: 0x%x\n",
-		       be32_to_cpu(*((__be32 *) (data + 14))));
+		       be32_to_cpu(*((__be32 *) (data + TPM_GET_CAP_RET_UINT32_1_IDX))));
 
 	memcpy(data, cap_version, sizeof(cap_version));
+	data[CAP_VERSION_IDX] = CAP_VERSION_1_1;
+	rc = transmit_cmd(chip, data, sizeof(data),
+			"attempting to determine the 1.1 version");
+	if (rc)
+		goto out;
 
-	if ((len = tpm_transmit(chip, data, sizeof(data))) <
-	    CAP_VER_RESULT_SIZE)
-		return len;
-
-	str +=
-	    sprintf(str, "TCG version: %d.%d\nFirmware version: %d.%d\n",
-		    (int) data[14], (int) data[15], (int) data[16],
-		    (int) data[17]);
+	str += sprintf(str,
+		       "TCG version: %d.%d\nFirmware version: %d.%d\n",
+		       (int) data[14], (int) data[15], (int) data[16],
+		       (int) data[17]);
 
+out:
 	return str - buf;
 }
 EXPORT_SYMBOL_GPL(tpm_show_caps);
 
+ssize_t tpm_show_caps_1_2(struct device * dev,
+			  struct device_attribute * attr, char *buf)
+{
+	u8 data[max_t(int, max(ARRAY_SIZE(tpm_cap), ARRAY_SIZE(cap_version)), 30)];
+	ssize_t len;
+	char *str = buf;
+
+	struct tpm_chip *chip = dev_get_drvdata(dev);
+	if (chip == NULL)
+		return -ENODEV;
+
+	memcpy(data, tpm_cap, sizeof(tpm_cap));
+	data[TPM_CAP_IDX] = TPM_CAP_PROP;
+	data[TPM_CAP_SUBCAP_IDX] = TPM_CAP_PROP_MANUFACTURER;
+
+	if ((len = tpm_transmit(chip, data, sizeof(data))) <=
+	    TPM_ERROR_SIZE) {
+		dev_dbg(chip->dev, "A TPM error (%d) occurred "
+			"attempting to determine the manufacturer\n",
+			be32_to_cpu(*((__be32 *) (data + TPM_RET_CODE_IDX))));
+		return 0;
+	}
+
+	str += sprintf(str, "Manufacturer: 0x%x\n",
+		       be32_to_cpu(*((__be32 *) (data + TPM_GET_CAP_RET_UINT32_1_IDX))));
+
+	memcpy(data, cap_version, sizeof(cap_version));
+	data[CAP_VERSION_IDX] = CAP_VERSION_1_2;
+
+	if ((len = tpm_transmit(chip, data, sizeof(data))) <=
+	    TPM_ERROR_SIZE) {
+		dev_err(chip->dev, "A TPM error (%d) occurred "
+			"attempting to determine the 1.2 version\n",
+			be32_to_cpu(*((__be32 *) (data + TPM_RET_CODE_IDX))));
+		goto out;
+	}
+	str += sprintf(str,
+		       "TCG version: %d.%d\nFirmware version: %d.%d\n",
+		       (int) data[16], (int) data[17], (int) data[18],
+		       (int) data[19]);
+
+out:
+	return str - buf;
+}
+EXPORT_SYMBOL_GPL(tpm_show_caps_1_2);
+
 ssize_t tpm_store_cancel(struct device *dev, struct device_attribute *attr,
 			const char *buf, size_t count)
 {
@@ -313,7 +883,7 @@ ssize_t tpm_store_cancel(struct device *dev, struct device_attribute *attr,
 	if (chip == NULL)
 		return 0;
 
-	chip->vendor->cancel(chip);
+	chip->vendor.cancel(chip);
 	return count;
 }
 EXPORT_SYMBOL_GPL(tpm_store_cancel);
@@ -329,7 +899,7 @@ int tpm_open(struct inode *inode, struct file *file)
 	spin_lock(&driver_lock);
 
 	list_for_each_entry(pos, &tpm_chip_list, list) {
-		if (pos->vendor->miscdev.minor == minor) {
+		if (pos->vendor.miscdev.minor == minor) {
 			chip = pos;
 			break;
 		}
@@ -387,7 +957,7 @@ int tpm_release(struct inode *inode, struct file *file)
 EXPORT_SYMBOL_GPL(tpm_release);
 
 ssize_t tpm_write(struct file *file, const char __user *buf,
-		  size_t size, loff_t * off)
+		  size_t size, loff_t *off)
 {
 	struct tpm_chip *chip = file->private_data;
 	int in_size = size, out_size;
@@ -419,11 +989,10 @@ ssize_t tpm_write(struct file *file, const char __user *buf,
 
 	return in_size;
 }
-
 EXPORT_SYMBOL_GPL(tpm_write);
 
-ssize_t tpm_read(struct file * file, char __user *buf,
-		 size_t size, loff_t * off)
+ssize_t tpm_read(struct file *file, char __user *buf,
+		 size_t size, loff_t *off)
 {
 	struct tpm_chip *chip = file->private_data;
 	int ret_size;
@@ -462,14 +1031,13 @@ void tpm_remove_hardware(struct device *dev)
 	spin_unlock(&driver_lock);
 
 	dev_set_drvdata(dev, NULL);
-	misc_deregister(&chip->vendor->miscdev);
-	kfree(chip->vendor->miscdev.name);
+	misc_deregister(&chip->vendor.miscdev);
+	kfree(chip->vendor.miscdev.name);
 
-	sysfs_remove_group(&dev->kobj, chip->vendor->attr_group);
+	sysfs_remove_group(&dev->kobj, chip->vendor.attr_group);
 	tpm_bios_log_teardown(chip->bios_dir);
 
-	dev_mask[chip->dev_num / TPM_NUM_MASK_ENTRIES ] &=
-		~(1 << (chip->dev_num % TPM_NUM_MASK_ENTRIES));
+	clear_bit(chip->dev_num, dev_mask);
 
 	kfree(chip);
 
@@ -520,18 +1088,18 @@ EXPORT_SYMBOL_GPL(tpm_pm_resume);
  * upon errant exit from this function specific probe function should call
  * pci_disable_device
  */
-int tpm_register_hardware(struct device *dev, struct tpm_vendor_specific *entry)
+struct tpm_chip *tpm_register_hardware(struct device *dev, const struct tpm_vendor_specific
+				       *entry)
 {
 #define DEVNAME_SIZE 7
 
 	char *devname;
 	struct tpm_chip *chip;
-	int i, j;
 
 	/* Driver specific per-device data */
 	chip = kzalloc(sizeof(*chip), GFP_KERNEL);
 	if (chip == NULL)
-		return -ENOMEM;
+		return NULL;
 
 	init_MUTEX(&chip->buffer_mutex);
 	init_MUTEX(&chip->tpm_mutex);
@@ -543,45 +1111,37 @@ int tpm_register_hardware(struct device *dev, struct tpm_vendor_specific *entry)
 	chip->user_read_timer.function = user_reader_timeout;
 	chip->user_read_timer.data = (unsigned long) chip;
 
-	chip->vendor = entry;
-
-	chip->dev_num = -1;
+	memcpy(&chip->vendor, entry, sizeof(struct tpm_vendor_specific));
 
-	for (i = 0; i < TPM_NUM_MASK_ENTRIES; i++)
-		for (j = 0; j < 8 * sizeof(int); j++)
-			if ((dev_mask[i] & (1 << j)) == 0) {
-				chip->dev_num =
-				    i * TPM_NUM_MASK_ENTRIES + j;
-				dev_mask[i] |= 1 << j;
-				goto dev_num_search_complete;
-			}
+	chip->dev_num = find_first_zero_bit(dev_mask, TPM_NUM_DEVICES);
 
-dev_num_search_complete:
-	if (chip->dev_num < 0) {
+	if (chip->dev_num >= TPM_NUM_DEVICES) {
 		dev_err(dev, "No available tpm device numbers\n");
 		kfree(chip);
-		return -ENODEV;
+		return NULL;
 	} else if (chip->dev_num == 0)
-		chip->vendor->miscdev.minor = TPM_MINOR;
+		chip->vendor.miscdev.minor = TPM_MINOR;
 	else
-		chip->vendor->miscdev.minor = MISC_DYNAMIC_MINOR;
+		chip->vendor.miscdev.minor = MISC_DYNAMIC_MINOR;
+
+	set_bit(chip->dev_num, dev_mask);
 
 	devname = kmalloc(DEVNAME_SIZE, GFP_KERNEL);
 	scnprintf(devname, DEVNAME_SIZE, "%s%d", "tpm", chip->dev_num);
-	chip->vendor->miscdev.name = devname;
+	chip->vendor.miscdev.name = devname;
 
-	chip->vendor->miscdev.dev = dev;
+	chip->vendor.miscdev.dev = dev;
 	chip->dev = get_device(dev);
 
-	if (misc_register(&chip->vendor->miscdev)) {
+	if (misc_register(&chip->vendor.miscdev)) {
 		dev_err(chip->dev,
 			"unable to misc_register %s, minor %d\n",
-			chip->vendor->miscdev.name,
-			chip->vendor->miscdev.minor);
+			chip->vendor.miscdev.name,
+			chip->vendor.miscdev.minor);
 		put_device(dev);
+		clear_bit(chip->dev_num, dev_mask);
 		kfree(chip);
-		dev_mask[i] &= !(1 << j);
-		return -ENODEV;
+		return NULL;
 	}
 
 	spin_lock(&driver_lock);
@@ -592,11 +1152,11 @@ dev_num_search_complete:
 
 	spin_unlock(&driver_lock);
 
-	sysfs_create_group(&dev->kobj, chip->vendor->attr_group);
+	sysfs_create_group(&dev->kobj, chip->vendor.attr_group);
 
 	chip->bios_dir = tpm_bios_log_setup(devname);
 
-	return 0;
+	return chip;
 }
 EXPORT_SYMBOL_GPL(tpm_register_hardware);
 
diff --git a/drivers/char/tpm/tpm.h b/drivers/char/tpm/tpm.h
index dec0224b4478..050ced247f68 100644
--- a/drivers/char/tpm/tpm.h
+++ b/drivers/char/tpm/tpm.h
@@ -42,18 +42,30 @@ extern ssize_t tpm_show_pcrs(struct device *, struct device_attribute *attr,
 				char *);
 extern ssize_t tpm_show_caps(struct device *, struct device_attribute *attr,
 				char *);
+extern ssize_t tpm_show_caps_1_2(struct device *, struct device_attribute *attr,
+				char *);
 extern ssize_t tpm_store_cancel(struct device *, struct device_attribute *attr,
 				const char *, size_t);
+extern ssize_t tpm_show_enabled(struct device *, struct device_attribute *attr,
+				char *);
+extern ssize_t tpm_show_active(struct device *, struct device_attribute *attr,
+				char *);
+extern ssize_t tpm_show_owned(struct device *, struct device_attribute *attr,
+				char *);
+extern ssize_t tpm_show_temp_deactivated(struct device *,
+					 struct device_attribute *attr, char *);
 
 struct tpm_chip;
 
 struct tpm_vendor_specific {
-	u8 req_complete_mask;
-	u8 req_complete_val;
-	u8 req_canceled;
+	const u8 req_complete_mask;
+	const u8 req_complete_val;
+	const u8 req_canceled;
 	void __iomem *iobase;		/* ioremapped address */
 	unsigned long base;		/* TPM base address */
 
+	int irq;
+
 	int region_size;
 	int have_region;
 
@@ -63,6 +75,13 @@ struct tpm_vendor_specific {
 	u8 (*status) (struct tpm_chip *);
 	struct miscdevice miscdev;
 	struct attribute_group *attr_group;
+	struct list_head list;
+	int locality;
+	unsigned long timeout_a, timeout_b, timeout_c, timeout_d; /* jiffies */
+	unsigned long duration[3]; /* jiffies */
+
+	wait_queue_head_t read_queue;
+	wait_queue_head_t int_queue;
 };
 
 struct tpm_chip {
@@ -81,13 +100,15 @@ struct tpm_chip {
 	struct work_struct work;
 	struct semaphore tpm_mutex;	/* tpm is processing */
 
-	struct tpm_vendor_specific *vendor;
+	struct tpm_vendor_specific vendor;
 
 	struct dentry **bios_dir;
 
 	struct list_head list;
 };
 
+#define to_tpm_chip(n) container_of(n, struct tpm_chip, vendor)
+
 static inline int tpm_read_index(int base, int index)
 {
 	outb(index, base);
@@ -100,8 +121,12 @@ static inline void tpm_write_index(int base, int index, int value)
 	outb(value & 0xFF, base+1);
 }
 
-extern int tpm_register_hardware(struct device *,
-				 struct tpm_vendor_specific *);
+extern void tpm_get_timeouts(struct tpm_chip *);
+extern void tpm_gen_interrupt(struct tpm_chip *);
+extern void tpm_continue_selftest(struct tpm_chip *);
+extern unsigned long tpm_calc_ordinal_duration(struct tpm_chip *, u32);
+extern struct tpm_chip* tpm_register_hardware(struct device *,
+				 const struct tpm_vendor_specific *);
 extern int tpm_open(struct inode *, struct file *);
 extern int tpm_release(struct inode *, struct file *);
 extern ssize_t tpm_write(struct file *, const char __user *, size_t,
@@ -115,7 +140,7 @@ extern int tpm_pm_resume(struct device *);
 extern struct dentry ** tpm_bios_log_setup(char *);
 extern void tpm_bios_log_teardown(struct dentry **);
 #else
-static inline struct dentry* tpm_bios_log_setup(char *name)
+static inline struct dentry ** tpm_bios_log_setup(char *name)
 {
 	return NULL;
 }
diff --git a/drivers/char/tpm/tpm_atmel.c b/drivers/char/tpm/tpm_atmel.c
index ff3654964fe3..58a258cec153 100644
--- a/drivers/char/tpm/tpm_atmel.c
+++ b/drivers/char/tpm/tpm_atmel.c
@@ -47,12 +47,12 @@ static int tpm_atml_recv(struct tpm_chip *chip, u8 *buf, size_t count)
 		return -EIO;
 
 	for (i = 0; i < 6; i++) {
-		status = ioread8(chip->vendor->iobase + 1);
+		status = ioread8(chip->vendor.iobase + 1);
 		if ((status & ATML_STATUS_DATA_AVAIL) == 0) {
 			dev_err(chip->dev, "error reading header\n");
 			return -EIO;
 		}
-		*buf++ = ioread8(chip->vendor->iobase);
+		*buf++ = ioread8(chip->vendor.iobase);
 	}
 
 	/* size of the data received */
@@ -63,7 +63,7 @@ static int tpm_atml_recv(struct tpm_chip *chip, u8 *buf, size_t count)
 		dev_err(chip->dev,
 			"Recv size(%d) less than available space\n", size);
 		for (; i < size; i++) {	/* clear the waiting data anyway */
-			status = ioread8(chip->vendor->iobase + 1);
+			status = ioread8(chip->vendor.iobase + 1);
 			if ((status & ATML_STATUS_DATA_AVAIL) == 0) {
 				dev_err(chip->dev, "error reading data\n");
 				return -EIO;
@@ -74,16 +74,16 @@ static int tpm_atml_recv(struct tpm_chip *chip, u8 *buf, size_t count)
 
 	/* read all the data available */
 	for (; i < size; i++) {
-		status = ioread8(chip->vendor->iobase + 1);
+		status = ioread8(chip->vendor.iobase + 1);
 		if ((status & ATML_STATUS_DATA_AVAIL) == 0) {
 			dev_err(chip->dev, "error reading data\n");
 			return -EIO;
 		}
-		*buf++ = ioread8(chip->vendor->iobase);
+		*buf++ = ioread8(chip->vendor.iobase);
 	}
 
 	/* make sure data available is gone */
-	status = ioread8(chip->vendor->iobase + 1);
+	status = ioread8(chip->vendor.iobase + 1);
 
 	if (status & ATML_STATUS_DATA_AVAIL) {
 		dev_err(chip->dev, "data available is stuck\n");
@@ -100,7 +100,7 @@ static int tpm_atml_send(struct tpm_chip *chip, u8 *buf, size_t count)
 	dev_dbg(chip->dev, "tpm_atml_send:\n");
 	for (i = 0; i < count; i++) {
 		dev_dbg(chip->dev, "%d 0x%x(%d)\n",  i, buf[i], buf[i]);
- 		iowrite8(buf[i], chip->vendor->iobase);
+ 		iowrite8(buf[i], chip->vendor.iobase);
 	}
 
 	return count;
@@ -108,12 +108,12 @@ static int tpm_atml_send(struct tpm_chip *chip, u8 *buf, size_t count)
 
 static void tpm_atml_cancel(struct tpm_chip *chip)
 {
-	iowrite8(ATML_STATUS_ABORT, chip->vendor->iobase + 1);
+	iowrite8(ATML_STATUS_ABORT, chip->vendor.iobase + 1);
 }
 
 static u8 tpm_atml_status(struct tpm_chip *chip)
 {
-	return ioread8(chip->vendor->iobase + 1);
+	return ioread8(chip->vendor.iobase + 1);
 }
 
 static struct file_operations atmel_ops = {
@@ -140,7 +140,7 @@ static struct attribute* atmel_attrs[] = {
 
 static struct attribute_group atmel_attr_grp = { .attrs = atmel_attrs };
 
-static struct tpm_vendor_specific tpm_atmel = {
+static const struct tpm_vendor_specific tpm_atmel = {
 	.recv = tpm_atml_recv,
 	.send = tpm_atml_send,
 	.cancel = tpm_atml_cancel,
@@ -159,10 +159,10 @@ static void atml_plat_remove(void)
 	struct tpm_chip *chip = dev_get_drvdata(&pdev->dev);
 
 	if (chip) {
-		if (chip->vendor->have_region)
-			atmel_release_region(chip->vendor->base,
-					     chip->vendor->region_size);
-		atmel_put_base_addr(chip->vendor);
+		if (chip->vendor.have_region)
+			atmel_release_region(chip->vendor.base,
+					     chip->vendor.region_size);
+		atmel_put_base_addr(chip->vendor.iobase);
 		tpm_remove_hardware(chip->dev);
 		platform_device_unregister(pdev);
 	}
@@ -179,18 +179,22 @@ static struct device_driver atml_drv = {
 static int __init init_atmel(void)
 {
 	int rc = 0;
+	void __iomem *iobase = NULL;
+	int have_region, region_size;
+	unsigned long base;
+	struct  tpm_chip *chip;
 
 	driver_register(&atml_drv);
 
-	if ((tpm_atmel.iobase = atmel_get_base_addr(&tpm_atmel)) == NULL) {
+	if ((iobase = atmel_get_base_addr(&base, &region_size)) == NULL) {
 		rc = -ENODEV;
 		goto err_unreg_drv;
 	}
 
-	tpm_atmel.have_region =
+	have_region =
 	    (atmel_request_region
-	     (tpm_atmel.base, tpm_atmel.region_size,
-	      "tpm_atmel0") == NULL) ? 0 : 1;
+	     (tpm_atmel.base, region_size, "tpm_atmel0") == NULL) ? 0 : 1;
+
 
 	if (IS_ERR
 	    (pdev =
@@ -199,17 +203,25 @@ static int __init init_atmel(void)
 		goto err_rel_reg;
 	}
 
-	if ((rc = tpm_register_hardware(&pdev->dev, &tpm_atmel)) < 0)
+	if (!(chip = tpm_register_hardware(&pdev->dev, &tpm_atmel))) {
+		rc = -ENODEV;
 		goto err_unreg_dev;
+	}
+
+	chip->vendor.iobase = iobase;
+	chip->vendor.base = base;
+	chip->vendor.have_region = have_region;
+	chip->vendor.region_size = region_size;
+
 	return 0;
 
 err_unreg_dev:
 	platform_device_unregister(pdev);
 err_rel_reg:
-	atmel_put_base_addr(&tpm_atmel);
-	if (tpm_atmel.have_region)
-		atmel_release_region(tpm_atmel.base,
-				     tpm_atmel.region_size);
+	atmel_put_base_addr(iobase);
+	if (have_region)
+		atmel_release_region(base,
+				     region_size);
 err_unreg_drv:
 	driver_unregister(&atml_drv);
 	return rc;
diff --git a/drivers/char/tpm/tpm_atmel.h b/drivers/char/tpm/tpm_atmel.h
index d3478aaadd77..2e68eeb8a2cd 100644
--- a/drivers/char/tpm/tpm_atmel.h
+++ b/drivers/char/tpm/tpm_atmel.h
@@ -28,13 +28,12 @@
 #define atmel_request_region request_mem_region
 #define atmel_release_region release_mem_region
 
-static inline void atmel_put_base_addr(struct tpm_vendor_specific
-					 *vendor)
+static inline void atmel_put_base_addr(void __iomem *iobase)
 {
-	iounmap(vendor->iobase);
+	iounmap(iobase);
 }
 
-static void __iomem * atmel_get_base_addr(struct tpm_vendor_specific *vendor)
+static void __iomem * atmel_get_base_addr(unsigned long *base, int *region_size)
 {
 	struct device_node *dn;
 	unsigned long address, size;
@@ -71,9 +70,9 @@ static void __iomem * atmel_get_base_addr(struct tpm_vendor_specific *vendor)
 	else
 		size = reg[naddrc];
 
-	vendor->base = address;
-	vendor->region_size = size;
-	return ioremap(vendor->base, vendor->region_size);
+	*base = address;
+	*region_size = size;
+	return ioremap(*base, *region_size);
 }
 #else
 #define atmel_getb(chip, offset) inb(chip->vendor->base + offset)
@@ -106,14 +105,12 @@ static int atmel_verify_tpm11(void)
 	return 0;
 }
 
-static inline void atmel_put_base_addr(struct tpm_vendor_specific
-					 *vendor)
+static inline void atmel_put_base_addr(void __iomem *iobase)
 {
 }
 
 /* Determine where to talk to device */
-static void __iomem * atmel_get_base_addr(struct tpm_vendor_specific
-					 *vendor)
+static void __iomem * atmel_get_base_addr(unsigned long *base, int *region_size)
 {
 	int lo, hi;
 
@@ -123,9 +120,9 @@ static void __iomem * atmel_get_base_addr(struct tpm_vendor_specific
 	lo = tpm_read_index(TPM_ADDR, TPM_ATMEL_BASE_ADDR_LO);
 	hi = tpm_read_index(TPM_ADDR, TPM_ATMEL_BASE_ADDR_HI);
 
-	vendor->base = (hi << 8) | lo;
-	vendor->region_size = 2;
+	*base = (hi << 8) | lo;
+	*region_size = 2;
 
-	return ioport_map(vendor->base, vendor->region_size);
+	return ioport_map(*base, *region_size);
 }
 #endif
diff --git a/drivers/char/tpm/tpm_bios.c b/drivers/char/tpm/tpm_bios.c
index 537aa45d8c67..a611972024e6 100644
--- a/drivers/char/tpm/tpm_bios.c
+++ b/drivers/char/tpm/tpm_bios.c
@@ -29,6 +29,11 @@
 #define MAX_TEXT_EVENT		1000	/* Max event string length */
 #define ACPI_TCPA_SIG		"TCPA"	/* 0x41504354 /'TCPA' */
 
+enum bios_platform_class {
+	BIOS_CLIENT = 0x00,
+	BIOS_SERVER = 0x01,
+};
+
 struct tpm_bios_log {
 	void *bios_event_log;
 	void *bios_event_log_end;
@@ -36,9 +41,18 @@ struct tpm_bios_log {
 
 struct acpi_tcpa {
 	struct acpi_table_header hdr;
-	u16 reserved;
-	u32 log_max_len __attribute__ ((packed));
-	u32 log_start_addr __attribute__ ((packed));
+	u16 platform_class;
+	union {
+		struct client_hdr {
+			u32 log_max_len __attribute__ ((packed));
+			u64 log_start_addr __attribute__ ((packed));
+		} client;
+		struct server_hdr {
+			u16 reserved;
+			u64 log_max_len __attribute__ ((packed));
+			u64 log_start_addr __attribute__ ((packed));
+		} server;
+	};
 };
 
 struct tcpa_event {
@@ -91,6 +105,12 @@ static const char* tcpa_event_type_strings[] = {
 	"Non-Host Info"
 };
 
+struct tcpa_pc_event {
+	u32 event_id;
+	u32 event_size;
+	u8 event_data[0];
+};
+
 enum tcpa_pc_event_ids {
 	SMBIOS = 1,
 	BIS_CERT,
@@ -100,14 +120,15 @@ enum tcpa_pc_event_ids {
 	NVRAM,
 	OPTION_ROM_EXEC,
 	OPTION_ROM_CONFIG,
-	OPTION_ROM_MICROCODE,
+	OPTION_ROM_MICROCODE = 10,
 	S_CRTM_VERSION,
 	S_CRTM_CONTENTS,
 	POST_CONTENTS,
+	HOST_TABLE_OF_DEVICES,
 };
 
 static const char* tcpa_pc_event_id_strings[] = {
-	""
+	"",
 	"SMBIOS",
 	"BIS Certificate",
 	"POST BIOS ",
@@ -116,10 +137,12 @@ static const char* tcpa_pc_event_id_strings[] = {
 	"NVRAM",
 	"Option ROM",
 	"Option ROM config",
-	"Option ROM microcode",
+	"",
+	"Option ROM microcode ",
 	"S-CRTM Version",
-	"S-CRTM Contents",
-	"S-CRTM POST Contents",
+	"S-CRTM Contents ",
+	"POST Contents ",
+	"Table of Devices",
 };
 
 /* returns pointer to start of pos. entry of tcg log */
@@ -191,7 +214,7 @@ static int get_event_name(char *dest, struct tcpa_event *event,
 	const char *name = "";
 	char data[40] = "";
 	int i, n_len = 0, d_len = 0;
-	u32 event_id;
+	struct tcpa_pc_event *pc_event;
 
 	switch(event->event_type) {
 	case PREBOOT:
@@ -220,31 +243,32 @@ static int get_event_name(char *dest, struct tcpa_event *event,
 		}
 		break;
 	case EVENT_TAG:
-		event_id = be32_to_cpu(*((u32 *)event_entry));
+		pc_event = (struct tcpa_pc_event *)event_entry;
 
 		/* ToDo Row data -> Base64 */
 
-		switch (event_id) {
+		switch (pc_event->event_id) {
 		case SMBIOS:
 		case BIS_CERT:
 		case CMOS:
 		case NVRAM:
 		case OPTION_ROM_EXEC:
 		case OPTION_ROM_CONFIG:
-		case OPTION_ROM_MICROCODE:
 		case S_CRTM_VERSION:
-		case S_CRTM_CONTENTS:
-		case POST_CONTENTS:
-			name = tcpa_pc_event_id_strings[event_id];
+			name = tcpa_pc_event_id_strings[pc_event->event_id];
 			n_len = strlen(name);
 			break;
+		/* hash data */
 		case POST_BIOS_ROM:
 		case ESCD:
-			name = tcpa_pc_event_id_strings[event_id];
+		case OPTION_ROM_MICROCODE:
+		case S_CRTM_CONTENTS:
+		case POST_CONTENTS:
+			name = tcpa_pc_event_id_strings[pc_event->event_id];
 			n_len = strlen(name);
 			for (i = 0; i < 20; i++)
-				d_len += sprintf(data, "%02x",
-						event_entry[8 + i]);
+				d_len += sprintf(&data[2*i], "%02x",
+						pc_event->event_data[i]);
 			break;
 		default:
 			break;
@@ -260,52 +284,13 @@ static int get_event_name(char *dest, struct tcpa_event *event,
 
 static int tpm_binary_bios_measurements_show(struct seq_file *m, void *v)
 {
+	struct tcpa_event *event = v;
+	char *data = v;
+	int i;
 
-	char *eventname;
-	char data[4];
-	u32 help;
-	int i, len;
-	struct tcpa_event *event = (struct tcpa_event *) v;
-	unsigned char *event_entry =
-	    (unsigned char *) (v + sizeof(struct tcpa_event));
-
-	eventname = kmalloc(MAX_TEXT_EVENT, GFP_KERNEL);
-	if (!eventname) {
-		printk(KERN_ERR "%s: ERROR - No Memory for event name\n ",
-		       __func__);
-		return -ENOMEM;
-	}
-
-	/* 1st: PCR used is in little-endian format (4 bytes) */
-	help = le32_to_cpu(event->pcr_index);
-	memcpy(data, &help, 4);
-	for (i = 0; i < 4; i++)
-		seq_putc(m, data[i]);
-
-	/* 2nd: SHA1 (20 bytes) */
-	for (i = 0; i < 20; i++)
-		seq_putc(m, event->pcr_value[i]);
-
-	/* 3rd: event type identifier (4 bytes) */
-	help = le32_to_cpu(event->event_type);
-	memcpy(data, &help, 4);
-	for (i = 0; i < 4; i++)
+	for (i = 0; i < sizeof(struct tcpa_event) + event->event_size; i++)
 		seq_putc(m, data[i]);
 
-	len = 0;
-
-	len += get_event_name(eventname, event, event_entry);
-
-	/* 4th:  filename <= 255 + \'0' delimiter */
-	if (len > TCG_EVENT_NAME_LEN_MAX)
-		len = TCG_EVENT_NAME_LEN_MAX;
-
-	for (i = 0; i < len; i++)
-		seq_putc(m, eventname[i]);
-
-	/* 5th: delimiter */
-	seq_putc(m, '\0');
-
 	return 0;
 }
 
@@ -353,6 +338,7 @@ static int tpm_ascii_bios_measurements_show(struct seq_file *m, void *v)
 	/* 4th: eventname <= max + \'0' delimiter */
 	seq_printf(m, " %s\n", eventname);
 
+	kfree(eventname);
 	return 0;
 }
 
@@ -376,6 +362,7 @@ static int read_log(struct tpm_bios_log *log)
 	struct acpi_tcpa *buff;
 	acpi_status status;
 	struct acpi_table_header *virt;
+	u64 len, start;
 
 	if (log->bios_event_log != NULL) {
 		printk(KERN_ERR
@@ -396,27 +383,37 @@ static int read_log(struct tpm_bios_log *log)
 		return -EIO;
 	}
 
-	if (buff->log_max_len == 0) {
+	switch(buff->platform_class) {
+	case BIOS_SERVER:
+		len = buff->server.log_max_len;
+		start = buff->server.log_start_addr;
+		break;
+	case BIOS_CLIENT:
+	default:
+		len = buff->client.log_max_len;
+		start = buff->client.log_start_addr;
+		break;
+	}
+	if (!len) {
 		printk(KERN_ERR "%s: ERROR - TCPA log area empty\n", __func__);
 		return -EIO;
 	}
 
 	/* malloc EventLog space */
-	log->bios_event_log = kmalloc(buff->log_max_len, GFP_KERNEL);
+	log->bios_event_log = kmalloc(len, GFP_KERNEL);
 	if (!log->bios_event_log) {
-		printk
-		    ("%s: ERROR - Not enough  Memory for BIOS measurements\n",
-		     __func__);
+		printk("%s: ERROR - Not enough  Memory for BIOS measurements\n",
+			__func__);
 		return -ENOMEM;
 	}
 
-	log->bios_event_log_end = log->bios_event_log + buff->log_max_len;
+	log->bios_event_log_end = log->bios_event_log + len;
 
-	acpi_os_map_memory(buff->log_start_addr, buff->log_max_len, (void *) &virt);
+	acpi_os_map_memory(start, len, (void *) &virt);
 
-	memcpy(log->bios_event_log, virt, buff->log_max_len);
+	memcpy(log->bios_event_log, virt, len);
 
-	acpi_os_unmap_memory(virt, buff->log_max_len);
+	acpi_os_unmap_memory(virt, len);
 	return 0;
 }
 
diff --git a/drivers/char/tpm/tpm_infineon.c b/drivers/char/tpm/tpm_infineon.c
index 24095f6ee6da..adfff21beb21 100644
--- a/drivers/char/tpm/tpm_infineon.c
+++ b/drivers/char/tpm/tpm_infineon.c
@@ -15,6 +15,7 @@
  * License.
  */
 
+#include <linux/init.h>
 #include <linux/pnp.h>
 #include "tpm.h"
 
@@ -104,7 +105,7 @@ static int empty_fifo(struct tpm_chip *chip, int clear_wrfifo)
 
 	if (clear_wrfifo) {
 		for (i = 0; i < 4096; i++) {
-			status = inb(chip->vendor->base + WRFIFO);
+			status = inb(chip->vendor.base + WRFIFO);
 			if (status == 0xff) {
 				if (check == 5)
 					break;
@@ -124,8 +125,8 @@ static int empty_fifo(struct tpm_chip *chip, int clear_wrfifo)
 	 */
 	i = 0;
 	do {
-		status = inb(chip->vendor->base + RDFIFO);
-		status = inb(chip->vendor->base + STAT);
+		status = inb(chip->vendor.base + RDFIFO);
+		status = inb(chip->vendor.base + STAT);
 		i++;
 		if (i == TPM_MAX_TRIES)
 			return -EIO;
@@ -138,7 +139,7 @@ static int wait(struct tpm_chip *chip, int wait_for_bit)
 	int status;
 	int i;
 	for (i = 0; i < TPM_MAX_TRIES; i++) {
-		status = inb(chip->vendor->base + STAT);
+		status = inb(chip->vendor.base + STAT);
 		/* check the status-register if wait_for_bit is set */
 		if (status & 1 << wait_for_bit)
 			break;
@@ -157,7 +158,7 @@ static int wait(struct tpm_chip *chip, int wait_for_bit)
 static void wait_and_send(struct tpm_chip *chip, u8 sendbyte)
 {
 	wait(chip, STAT_XFE);
-	outb(sendbyte, chip->vendor->base + WRFIFO);
+	outb(sendbyte, chip->vendor.base + WRFIFO);
 }
 
     /* Note: WTX means Waiting-Time-Extension. Whenever the TPM needs more
@@ -204,7 +205,7 @@ recv_begin:
 		ret = wait(chip, STAT_RDA);
 		if (ret)
 			return -EIO;
-		buf[i] = inb(chip->vendor->base + RDFIFO);
+		buf[i] = inb(chip->vendor.base + RDFIFO);
 	}
 
 	if (buf[0] != TPM_VL_VER) {
@@ -219,7 +220,7 @@ recv_begin:
 
 		for (i = 0; i < size; i++) {
 			wait(chip, STAT_RDA);
-			buf[i] = inb(chip->vendor->base + RDFIFO);
+			buf[i] = inb(chip->vendor.base + RDFIFO);
 		}
 
 		if ((size == 0x6D00) && (buf[1] == 0x80)) {
@@ -268,7 +269,7 @@ static int tpm_inf_send(struct tpm_chip *chip, u8 * buf, size_t count)
 	u8 count_high, count_low, count_4, count_3, count_2, count_1;
 
 	/* Disabling Reset, LP and IRQC */
-	outb(RESET_LP_IRQC_DISABLE, chip->vendor->base + CMD);
+	outb(RESET_LP_IRQC_DISABLE, chip->vendor.base + CMD);
 
 	ret = empty_fifo(chip, 1);
 	if (ret) {
@@ -319,7 +320,7 @@ static void tpm_inf_cancel(struct tpm_chip *chip)
 
 static u8 tpm_inf_status(struct tpm_chip *chip)
 {
-	return inb(chip->vendor->base + STAT);
+	return inb(chip->vendor.base + STAT);
 }
 
 static DEVICE_ATTR(pubek, S_IRUGO, tpm_show_pubek, NULL);
@@ -346,7 +347,7 @@ static struct file_operations inf_ops = {
 	.release = tpm_release,
 };
 
-static struct tpm_vendor_specific tpm_inf = {
+static const struct tpm_vendor_specific tpm_inf = {
 	.recv = tpm_inf_recv,
 	.send = tpm_inf_send,
 	.cancel = tpm_inf_cancel,
@@ -375,6 +376,7 @@ static int __devinit tpm_inf_pnp_probe(struct pnp_dev *dev,
 	int version[2];
 	int productid[2];
 	char chipname[20];
+	struct tpm_chip *chip;
 
 	/* read IO-ports through PnP */
 	if (pnp_port_valid(dev, 0) && pnp_port_valid(dev, 1) &&
@@ -395,14 +397,13 @@ static int __devinit tpm_inf_pnp_probe(struct pnp_dev *dev,
 			goto err_last;
 		}
 		/* publish my base address and request region */
-		tpm_inf.base = TPM_INF_BASE;
 		if (request_region
-		    (tpm_inf.base, TPM_INF_PORT_LEN, "tpm_infineon0") == NULL) {
+		    (TPM_INF_BASE, TPM_INF_PORT_LEN, "tpm_infineon0") == NULL) {
 			rc = -EINVAL;
 			goto err_last;
 		}
-		if (request_region(TPM_INF_ADDR, TPM_INF_ADDR_LEN,
-				"tpm_infineon0") == NULL) {
+		if (request_region
+		    (TPM_INF_ADDR, TPM_INF_ADDR_LEN, "tpm_infineon0") == NULL) {
 			rc = -EINVAL;
 			goto err_last;
 		}
@@ -442,9 +443,9 @@ static int __devinit tpm_inf_pnp_probe(struct pnp_dev *dev,
 
 		/* configure TPM with IO-ports */
 		outb(IOLIMH, TPM_INF_ADDR);
-		outb(((tpm_inf.base >> 8) & 0xff), TPM_INF_DATA);
+		outb(((TPM_INF_BASE >> 8) & 0xff), TPM_INF_DATA);
 		outb(IOLIML, TPM_INF_ADDR);
-		outb((tpm_inf.base & 0xff), TPM_INF_DATA);
+		outb((TPM_INF_BASE & 0xff), TPM_INF_DATA);
 
 		/* control if IO-ports are set correctly */
 		outb(IOLIMH, TPM_INF_ADDR);
@@ -452,10 +453,10 @@ static int __devinit tpm_inf_pnp_probe(struct pnp_dev *dev,
 		outb(IOLIML, TPM_INF_ADDR);
 		iol = inb(TPM_INF_DATA);
 
-		if ((ioh << 8 | iol) != tpm_inf.base) {
+		if ((ioh << 8 | iol) != TPM_INF_BASE) {
 			dev_err(&dev->dev,
-				"Could not set IO-ports to 0x%lx\n",
-				tpm_inf.base);
+				"Could not set IO-ports to 0x%x\n",
+				TPM_INF_BASE);
 			rc = -EIO;
 			goto err_release_region;
 		}
@@ -466,15 +467,15 @@ static int __devinit tpm_inf_pnp_probe(struct pnp_dev *dev,
 		outb(DISABLE_REGISTER_PAIR, TPM_INF_ADDR);
 
 		/* disable RESET, LP and IRQC */
-		outb(RESET_LP_IRQC_DISABLE, tpm_inf.base + CMD);
+		outb(RESET_LP_IRQC_DISABLE, TPM_INF_BASE + CMD);
 
 		/* Finally, we're done, print some infos */
 		dev_info(&dev->dev, "TPM found: "
 			 "config base 0x%x, "
 			 "io base 0x%x, "
-			 "chip version %02x%02x, "
-			 "vendor id %x%x (Infineon), "
-			 "product id %02x%02x"
+			 "chip version 0x%02x%02x, "
+			 "vendor id 0x%x%x (Infineon), "
+			 "product id 0x%02x%02x"
 			 "%s\n",
 			 TPM_INF_ADDR,
 			 TPM_INF_BASE,
@@ -482,11 +483,10 @@ static int __devinit tpm_inf_pnp_probe(struct pnp_dev *dev,
 			 vendorid[0], vendorid[1],
 			 productid[0], productid[1], chipname);
 
-		rc = tpm_register_hardware(&dev->dev, &tpm_inf);
-		if (rc < 0) {
-			rc = -ENODEV;
+		if (!(chip = tpm_register_hardware(&dev->dev, &tpm_inf))) {
 			goto err_release_region;
 		}
+		chip->vendor.base = TPM_INF_BASE;
 		return 0;
 	} else {
 		rc = -ENODEV;
@@ -494,7 +494,7 @@ static int __devinit tpm_inf_pnp_probe(struct pnp_dev *dev,
 	}
 
 err_release_region:
-	release_region(tpm_inf.base, TPM_INF_PORT_LEN);
+	release_region(TPM_INF_BASE, TPM_INF_PORT_LEN);
 	release_region(TPM_INF_ADDR, TPM_INF_ADDR_LEN);
 
 err_last:
@@ -506,7 +506,8 @@ static __devexit void tpm_inf_pnp_remove(struct pnp_dev *dev)
 	struct tpm_chip *chip = pnp_get_drvdata(dev);
 
 	if (chip) {
-		release_region(chip->vendor->base, TPM_INF_PORT_LEN);
+		release_region(TPM_INF_BASE, TPM_INF_PORT_LEN);
+		release_region(TPM_INF_ADDR, TPM_INF_ADDR_LEN);
 		tpm_remove_hardware(chip->dev);
 	}
 }
@@ -520,7 +521,7 @@ static struct pnp_driver tpm_inf_pnp = {
 	},
 	.id_table = tpm_pnp_tbl,
 	.probe = tpm_inf_pnp_probe,
-	.remove = tpm_inf_pnp_remove,
+	.remove = __devexit_p(tpm_inf_pnp_remove),
 };
 
 static int __init init_inf(void)
@@ -538,5 +539,5 @@ module_exit(cleanup_inf);
 
 MODULE_AUTHOR("Marcel Selhorst <selhorst@crypto.rub.de>");
 MODULE_DESCRIPTION("Driver for Infineon TPM SLD 9630 TT 1.1 / SLB 9635 TT 1.2");
-MODULE_VERSION("1.7");
+MODULE_VERSION("1.8");
 MODULE_LICENSE("GPL");
diff --git a/drivers/char/tpm/tpm_nsc.c b/drivers/char/tpm/tpm_nsc.c
index 680a8e331887..4c8bc06c7d95 100644
--- a/drivers/char/tpm/tpm_nsc.c
+++ b/drivers/char/tpm/tpm_nsc.c
@@ -71,7 +71,7 @@ static int wait_for_stat(struct tpm_chip *chip, u8 mask, u8 val, u8 * data)
 	unsigned long stop;
 
 	/* status immediately available check */
-	*data = inb(chip->vendor->base + NSC_STATUS);
+	*data = inb(chip->vendor.base + NSC_STATUS);
 	if ((*data & mask) == val)
 		return 0;
 
@@ -79,7 +79,7 @@ static int wait_for_stat(struct tpm_chip *chip, u8 mask, u8 val, u8 * data)
 	stop = jiffies + 10 * HZ;
 	do {
 		msleep(TPM_TIMEOUT);
-		*data = inb(chip->vendor->base + 1);
+		*data = inb(chip->vendor.base + 1);
 		if ((*data & mask) == val)
 			return 0;
 	}
@@ -94,9 +94,9 @@ static int nsc_wait_for_ready(struct tpm_chip *chip)
 	unsigned long stop;
 
 	/* status immediately available check */
-	status = inb(chip->vendor->base + NSC_STATUS);
+	status = inb(chip->vendor.base + NSC_STATUS);
 	if (status & NSC_STATUS_OBF)
-		status = inb(chip->vendor->base + NSC_DATA);
+		status = inb(chip->vendor.base + NSC_DATA);
 	if (status & NSC_STATUS_RDY)
 		return 0;
 
@@ -104,9 +104,9 @@ static int nsc_wait_for_ready(struct tpm_chip *chip)
 	stop = jiffies + 100;
 	do {
 		msleep(TPM_TIMEOUT);
-		status = inb(chip->vendor->base + NSC_STATUS);
+		status = inb(chip->vendor.base + NSC_STATUS);
 		if (status & NSC_STATUS_OBF)
-			status = inb(chip->vendor->base + NSC_DATA);
+			status = inb(chip->vendor.base + NSC_DATA);
 		if (status & NSC_STATUS_RDY)
 			return 0;
 	}
@@ -132,7 +132,7 @@ static int tpm_nsc_recv(struct tpm_chip *chip, u8 * buf, size_t count)
 		return -EIO;
 	}
 	if ((data =
-	     inb(chip->vendor->base + NSC_DATA)) != NSC_COMMAND_NORMAL) {
+	     inb(chip->vendor.base + NSC_DATA)) != NSC_COMMAND_NORMAL) {
 		dev_err(chip->dev, "not in normal mode (0x%x)\n",
 			data);
 		return -EIO;
@@ -148,7 +148,7 @@ static int tpm_nsc_recv(struct tpm_chip *chip, u8 * buf, size_t count)
 		}
 		if (data & NSC_STATUS_F0)
 			break;
-		*p = inb(chip->vendor->base + NSC_DATA);
+		*p = inb(chip->vendor.base + NSC_DATA);
 	}
 
 	if ((data & NSC_STATUS_F0) == 0 &&
@@ -156,7 +156,7 @@ static int tpm_nsc_recv(struct tpm_chip *chip, u8 * buf, size_t count)
 		dev_err(chip->dev, "F0 not set\n");
 		return -EIO;
 	}
-	if ((data = inb(chip->vendor->base + NSC_DATA)) != NSC_COMMAND_EOC) {
+	if ((data = inb(chip->vendor.base + NSC_DATA)) != NSC_COMMAND_EOC) {
 		dev_err(chip->dev,
 			"expected end of command(0x%x)\n", data);
 		return -EIO;
@@ -182,7 +182,7 @@ static int tpm_nsc_send(struct tpm_chip *chip, u8 * buf, size_t count)
 	 * fix it. Not sure why this is needed, we followed the flow
 	 * chart in the manual to the letter.
 	 */
-	outb(NSC_COMMAND_CANCEL, chip->vendor->base + NSC_COMMAND);
+	outb(NSC_COMMAND_CANCEL, chip->vendor.base + NSC_COMMAND);
 
 	if (nsc_wait_for_ready(chip) != 0)
 		return -EIO;
@@ -192,7 +192,7 @@ static int tpm_nsc_send(struct tpm_chip *chip, u8 * buf, size_t count)
 		return -EIO;
 	}
 
-	outb(NSC_COMMAND_NORMAL, chip->vendor->base + NSC_COMMAND);
+	outb(NSC_COMMAND_NORMAL, chip->vendor.base + NSC_COMMAND);
 	if (wait_for_stat(chip, NSC_STATUS_IBR, NSC_STATUS_IBR, &data) < 0) {
 		dev_err(chip->dev, "IBR timeout\n");
 		return -EIO;
@@ -204,26 +204,26 @@ static int tpm_nsc_send(struct tpm_chip *chip, u8 * buf, size_t count)
 				"IBF timeout (while writing data)\n");
 			return -EIO;
 		}
-		outb(buf[i], chip->vendor->base + NSC_DATA);
+		outb(buf[i], chip->vendor.base + NSC_DATA);
 	}
 
 	if (wait_for_stat(chip, NSC_STATUS_IBF, 0, &data) < 0) {
 		dev_err(chip->dev, "IBF timeout\n");
 		return -EIO;
 	}
-	outb(NSC_COMMAND_EOC, chip->vendor->base + NSC_COMMAND);
+	outb(NSC_COMMAND_EOC, chip->vendor.base + NSC_COMMAND);
 
 	return count;
 }
 
 static void tpm_nsc_cancel(struct tpm_chip *chip)
 {
-	outb(NSC_COMMAND_CANCEL, chip->vendor->base + NSC_COMMAND);
+	outb(NSC_COMMAND_CANCEL, chip->vendor.base + NSC_COMMAND);
 }
 
 static u8 tpm_nsc_status(struct tpm_chip *chip)
 {
-	return inb(chip->vendor->base + NSC_STATUS);
+	return inb(chip->vendor.base + NSC_STATUS);
 }
 
 static struct file_operations nsc_ops = {
@@ -250,7 +250,7 @@ static struct attribute * nsc_attrs[] = {
 
 static struct attribute_group nsc_attr_grp = { .attrs = nsc_attrs };
 
-static struct tpm_vendor_specific tpm_nsc = {
+static const struct tpm_vendor_specific tpm_nsc = {
 	.recv = tpm_nsc_recv,
 	.send = tpm_nsc_send,
 	.cancel = tpm_nsc_cancel,
@@ -268,7 +268,7 @@ static void __devexit tpm_nsc_remove(struct device *dev)
 {
 	struct tpm_chip *chip = dev_get_drvdata(dev);
 	if ( chip ) {
-		release_region(chip->vendor->base, 2);
+		release_region(chip->vendor.base, 2);
 		tpm_remove_hardware(chip->dev);
 	}
 }
@@ -286,7 +286,8 @@ static int __init init_nsc(void)
 	int rc = 0;
 	int lo, hi;
 	int nscAddrBase = TPM_ADDR;
-
+	struct tpm_chip *chip;
+	unsigned long base;
 
 	/* verify that it is a National part (SID) */
 	if (tpm_read_index(TPM_ADDR, NSC_SID_INDEX) != 0xEF) {
@@ -300,7 +301,7 @@ static int __init init_nsc(void)
 
 	hi = tpm_read_index(nscAddrBase, TPM_NSC_BASE0_HI);
 	lo = tpm_read_index(nscAddrBase, TPM_NSC_BASE0_LO);
-	tpm_nsc.base = (hi<<8) | lo;
+	base = (hi<<8) | lo;
 
 	/* enable the DPM module */
 	tpm_write_index(nscAddrBase, NSC_LDC_INDEX, 0x01);
@@ -320,13 +321,15 @@ static int __init init_nsc(void)
 	if ((rc = platform_device_register(pdev)) < 0)
 		goto err_free_dev;
 
-	if (request_region(tpm_nsc.base, 2, "tpm_nsc0") == NULL ) {
+	if (request_region(base, 2, "tpm_nsc0") == NULL ) {
 		rc = -EBUSY;
 		goto err_unreg_dev;
 	}
 
-	if ((rc = tpm_register_hardware(&pdev->dev, &tpm_nsc)) < 0)
+	if (!(chip = tpm_register_hardware(&pdev->dev, &tpm_nsc))) {
+		rc = -ENODEV;
 		goto err_rel_reg;
+	}
 
 	dev_dbg(&pdev->dev, "NSC TPM detected\n");
 	dev_dbg(&pdev->dev,
@@ -361,10 +364,12 @@ static int __init init_nsc(void)
 		 "NSC TPM revision %d\n",
 		 tpm_read_index(nscAddrBase, 0x27) & 0x1F);
 
+	chip->vendor.base = base;
+
 	return 0;
 
 err_rel_reg:
-	release_region(tpm_nsc.base, 2);
+	release_region(base, 2);
 err_unreg_dev:
 	platform_device_unregister(pdev);
 err_free_dev:
diff --git a/drivers/char/tpm/tpm_tis.c b/drivers/char/tpm/tpm_tis.c
new file mode 100644
index 000000000000..8ea70625f7ea
--- /dev/null
+++ b/drivers/char/tpm/tpm_tis.c
@@ -0,0 +1,665 @@
+/*
+ * Copyright (C) 2005, 2006 IBM Corporation
+ *
+ * Authors:
+ * Leendert van Doorn <leendert@watson.ibm.com>
+ * Kylene Hall <kjhall@us.ibm.com>
+ *
+ * Device driver for TCG/TCPA TPM (trusted platform module).
+ * Specifications at www.trustedcomputinggroup.org
+ *
+ * This device driver implements the TPM interface as defined in
+ * the TCG TPM Interface Spec version 1.2, revision 1.0.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2 of the
+ * License.
+ */
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/pnp.h>
+#include <linux/interrupt.h>
+#include <linux/wait.h>
+#include "tpm.h"
+
+#define TPM_HEADER_SIZE 10
+
+enum tis_access {
+	TPM_ACCESS_VALID = 0x80,
+	TPM_ACCESS_ACTIVE_LOCALITY = 0x20,
+	TPM_ACCESS_REQUEST_PENDING = 0x04,
+	TPM_ACCESS_REQUEST_USE = 0x02,
+};
+
+enum tis_status {
+	TPM_STS_VALID = 0x80,
+	TPM_STS_COMMAND_READY = 0x40,
+	TPM_STS_GO = 0x20,
+	TPM_STS_DATA_AVAIL = 0x10,
+	TPM_STS_DATA_EXPECT = 0x08,
+};
+
+enum tis_int_flags {
+	TPM_GLOBAL_INT_ENABLE = 0x80000000,
+	TPM_INTF_BURST_COUNT_STATIC = 0x100,
+	TPM_INTF_CMD_READY_INT = 0x080,
+	TPM_INTF_INT_EDGE_FALLING = 0x040,
+	TPM_INTF_INT_EDGE_RISING = 0x020,
+	TPM_INTF_INT_LEVEL_LOW = 0x010,
+	TPM_INTF_INT_LEVEL_HIGH = 0x008,
+	TPM_INTF_LOCALITY_CHANGE_INT = 0x004,
+	TPM_INTF_STS_VALID_INT = 0x002,
+	TPM_INTF_DATA_AVAIL_INT = 0x001,
+};
+
+enum tis_defaults {
+	TIS_MEM_BASE = 0xFED40000,
+	TIS_MEM_LEN = 0x5000,
+	TIS_SHORT_TIMEOUT = 750,	/* ms */
+	TIS_LONG_TIMEOUT = 2000,	/* 2 sec */
+};
+
+#define	TPM_ACCESS(l)			(0x0000 | ((l) << 12))
+#define	TPM_INT_ENABLE(l)		(0x0008 | ((l) << 12))
+#define	TPM_INT_VECTOR(l)		(0x000C | ((l) << 12))
+#define	TPM_INT_STATUS(l)		(0x0010 | ((l) << 12))
+#define	TPM_INTF_CAPS(l)		(0x0014 | ((l) << 12))
+#define	TPM_STS(l)			(0x0018 | ((l) << 12))
+#define	TPM_DATA_FIFO(l)		(0x0024 | ((l) << 12))
+
+#define	TPM_DID_VID(l)			(0x0F00 | ((l) << 12))
+#define	TPM_RID(l)			(0x0F04 | ((l) << 12))
+
+static LIST_HEAD(tis_chips);
+static DEFINE_SPINLOCK(tis_lock);
+
+static int check_locality(struct tpm_chip *chip, int l)
+{
+	if ((ioread8(chip->vendor.iobase + TPM_ACCESS(l)) &
+	     (TPM_ACCESS_ACTIVE_LOCALITY | TPM_ACCESS_VALID)) ==
+	    (TPM_ACCESS_ACTIVE_LOCALITY | TPM_ACCESS_VALID))
+		return chip->vendor.locality = l;
+
+	return -1;
+}
+
+static void release_locality(struct tpm_chip *chip, int l, int force)
+{
+	if (force || (ioread8(chip->vendor.iobase + TPM_ACCESS(l)) &
+		      (TPM_ACCESS_REQUEST_PENDING | TPM_ACCESS_VALID)) ==
+	    (TPM_ACCESS_REQUEST_PENDING | TPM_ACCESS_VALID))
+		iowrite8(TPM_ACCESS_ACTIVE_LOCALITY,
+			 chip->vendor.iobase + TPM_ACCESS(l));
+}
+
+static int request_locality(struct tpm_chip *chip, int l)
+{
+	unsigned long stop;
+	long rc;
+
+	if (check_locality(chip, l) >= 0)
+		return l;
+
+	iowrite8(TPM_ACCESS_REQUEST_USE,
+		 chip->vendor.iobase + TPM_ACCESS(l));
+
+	if (chip->vendor.irq) {
+		rc = wait_event_interruptible_timeout(chip->vendor.int_queue,
+						      (check_locality
+						       (chip, l) >= 0),
+						      chip->vendor.timeout_a);
+		if (rc > 0)
+			return l;
+
+	} else {
+		/* wait for burstcount */
+		stop = jiffies + chip->vendor.timeout_a;
+		do {
+			if (check_locality(chip, l) >= 0)
+				return l;
+			msleep(TPM_TIMEOUT);
+		}
+		while (time_before(jiffies, stop));
+	}
+	return -1;
+}
+
+static u8 tpm_tis_status(struct tpm_chip *chip)
+{
+	return ioread8(chip->vendor.iobase +
+		       TPM_STS(chip->vendor.locality));
+}
+
+static void tpm_tis_ready(struct tpm_chip *chip)
+{
+	/* this causes the current command to be aborted */
+	iowrite8(TPM_STS_COMMAND_READY,
+		 chip->vendor.iobase + TPM_STS(chip->vendor.locality));
+}
+
+static int get_burstcount(struct tpm_chip *chip)
+{
+	unsigned long stop;
+	int burstcnt;
+
+	/* wait for burstcount */
+	/* which timeout value, spec has 2 answers (c & d) */
+	stop = jiffies + chip->vendor.timeout_d;
+	do {
+		burstcnt = ioread8(chip->vendor.iobase +
+				   TPM_STS(chip->vendor.locality) + 1);
+		burstcnt += ioread8(chip->vendor.iobase +
+				    TPM_STS(chip->vendor.locality) +
+				    2) << 8;
+		if (burstcnt)
+			return burstcnt;
+		msleep(TPM_TIMEOUT);
+	} while (time_before(jiffies, stop));
+	return -EBUSY;
+}
+
+static int wait_for_stat(struct tpm_chip *chip, u8 mask, unsigned long timeout,
+			 wait_queue_head_t *queue)
+{
+	unsigned long stop;
+	long rc;
+	u8 status;
+
+	/* check current status */
+	status = tpm_tis_status(chip);
+	if ((status & mask) == mask)
+		return 0;
+
+	if (chip->vendor.irq) {
+		rc = wait_event_interruptible_timeout(*queue,
+						      ((tpm_tis_status
+							(chip) & mask) ==
+						       mask), timeout);
+		if (rc > 0)
+			return 0;
+	} else {
+		stop = jiffies + timeout;
+		do {
+			msleep(TPM_TIMEOUT);
+			status = tpm_tis_status(chip);
+			if ((status & mask) == mask)
+				return 0;
+		} while (time_before(jiffies, stop));
+	}
+	return -ETIME;
+}
+
+static int recv_data(struct tpm_chip *chip, u8 *buf, size_t count)
+{
+	int size = 0, burstcnt;
+	while (size < count &&
+	       wait_for_stat(chip,
+			     TPM_STS_DATA_AVAIL | TPM_STS_VALID,
+			     chip->vendor.timeout_c,
+			     &chip->vendor.read_queue)
+	       == 0) {
+		burstcnt = get_burstcount(chip);
+		for (; burstcnt > 0 && size < count; burstcnt--)
+			buf[size++] = ioread8(chip->vendor.iobase +
+					      TPM_DATA_FIFO(chip->vendor.
+							    locality));
+	}
+	return size;
+}
+
+static int tpm_tis_recv(struct tpm_chip *chip, u8 *buf, size_t count)
+{
+	int size = 0;
+	int expected, status;
+
+	if (count < TPM_HEADER_SIZE) {
+		size = -EIO;
+		goto out;
+	}
+
+	/* read first 10 bytes, including tag, paramsize, and result */
+	if ((size =
+	     recv_data(chip, buf, TPM_HEADER_SIZE)) < TPM_HEADER_SIZE) {
+		dev_err(chip->dev, "Unable to read header\n");
+		goto out;
+	}
+
+	expected = be32_to_cpu(*(__be32 *) (buf + 2));
+	if (expected > count) {
+		size = -EIO;
+		goto out;
+	}
+
+	if ((size +=
+	     recv_data(chip, &buf[TPM_HEADER_SIZE],
+		       expected - TPM_HEADER_SIZE)) < expected) {
+		dev_err(chip->dev, "Unable to read remainder of result\n");
+		size = -ETIME;
+		goto out;
+	}
+
+	wait_for_stat(chip, TPM_STS_VALID, chip->vendor.timeout_c,
+		      &chip->vendor.int_queue);
+	status = tpm_tis_status(chip);
+	if (status & TPM_STS_DATA_AVAIL) {	/* retry? */
+		dev_err(chip->dev, "Error left over data\n");
+		size = -EIO;
+		goto out;
+	}
+
+out:
+	tpm_tis_ready(chip);
+	release_locality(chip, chip->vendor.locality, 0);
+	return size;
+}
+
+/*
+ * If interrupts are used (signaled by an irq set in the vendor structure)
+ * tpm.c can skip polling for the data to be available as the interrupt is
+ * waited for here
+ */
+static int tpm_tis_send(struct tpm_chip *chip, u8 *buf, size_t len)
+{
+	int rc, status, burstcnt;
+	size_t count = 0;
+	u32 ordinal;
+
+	if (request_locality(chip, 0) < 0)
+		return -EBUSY;
+
+	status = tpm_tis_status(chip);
+	if ((status & TPM_STS_COMMAND_READY) == 0) {
+		tpm_tis_ready(chip);
+		if (wait_for_stat
+		    (chip, TPM_STS_COMMAND_READY, chip->vendor.timeout_b,
+		     &chip->vendor.int_queue) < 0) {
+			rc = -ETIME;
+			goto out_err;
+		}
+	}
+
+	while (count < len - 1) {
+		burstcnt = get_burstcount(chip);
+		for (; burstcnt > 0 && count < len - 1; burstcnt--) {
+			iowrite8(buf[count], chip->vendor.iobase +
+				 TPM_DATA_FIFO(chip->vendor.locality));
+			count++;
+		}
+
+		wait_for_stat(chip, TPM_STS_VALID, chip->vendor.timeout_c,
+			      &chip->vendor.int_queue);
+		status = tpm_tis_status(chip);
+		if ((status & TPM_STS_DATA_EXPECT) == 0) {
+			rc = -EIO;
+			goto out_err;
+		}
+	}
+
+	/* write last byte */
+	iowrite8(buf[count],
+		 chip->vendor.iobase +
+		 TPM_DATA_FIFO(chip->vendor.locality));
+	wait_for_stat(chip, TPM_STS_VALID, chip->vendor.timeout_c,
+		      &chip->vendor.int_queue);
+	status = tpm_tis_status(chip);
+	if ((status & TPM_STS_DATA_EXPECT) != 0) {
+		rc = -EIO;
+		goto out_err;
+	}
+
+	/* go and do it */
+	iowrite8(TPM_STS_GO,
+		 chip->vendor.iobase + TPM_STS(chip->vendor.locality));
+
+	if (chip->vendor.irq) {
+		ordinal = be32_to_cpu(*((__be32 *) (buf + 6)));
+		if (wait_for_stat
+		    (chip, TPM_STS_DATA_AVAIL | TPM_STS_VALID,
+		     tpm_calc_ordinal_duration(chip, ordinal),
+		     &chip->vendor.read_queue) < 0) {
+			rc = -ETIME;
+			goto out_err;
+		}
+	}
+	return len;
+out_err:
+	tpm_tis_ready(chip);
+	release_locality(chip, chip->vendor.locality, 0);
+	return rc;
+}
+
+static struct file_operations tis_ops = {
+	.owner = THIS_MODULE,
+	.llseek = no_llseek,
+	.open = tpm_open,
+	.read = tpm_read,
+	.write = tpm_write,
+	.release = tpm_release,
+};
+
+static DEVICE_ATTR(pubek, S_IRUGO, tpm_show_pubek, NULL);
+static DEVICE_ATTR(pcrs, S_IRUGO, tpm_show_pcrs, NULL);
+static DEVICE_ATTR(enabled, S_IRUGO, tpm_show_enabled, NULL);
+static DEVICE_ATTR(active, S_IRUGO, tpm_show_active, NULL);
+static DEVICE_ATTR(owned, S_IRUGO, tpm_show_owned, NULL);
+static DEVICE_ATTR(temp_deactivated, S_IRUGO, tpm_show_temp_deactivated,
+		   NULL);
+static DEVICE_ATTR(caps, S_IRUGO, tpm_show_caps_1_2, NULL);
+static DEVICE_ATTR(cancel, S_IWUSR | S_IWGRP, NULL, tpm_store_cancel);
+
+static struct attribute *tis_attrs[] = {
+	&dev_attr_pubek.attr,
+	&dev_attr_pcrs.attr,
+	&dev_attr_enabled.attr,
+	&dev_attr_active.attr,
+	&dev_attr_owned.attr,
+	&dev_attr_temp_deactivated.attr,
+	&dev_attr_caps.attr,
+	&dev_attr_cancel.attr, NULL,
+};
+
+static struct attribute_group tis_attr_grp = {
+	.attrs = tis_attrs
+};
+
+static struct tpm_vendor_specific tpm_tis = {
+	.status = tpm_tis_status,
+	.recv = tpm_tis_recv,
+	.send = tpm_tis_send,
+	.cancel = tpm_tis_ready,
+	.req_complete_mask = TPM_STS_DATA_AVAIL | TPM_STS_VALID,
+	.req_complete_val = TPM_STS_DATA_AVAIL | TPM_STS_VALID,
+	.req_canceled = TPM_STS_COMMAND_READY,
+	.attr_group = &tis_attr_grp,
+	.miscdev = {
+		    .fops = &tis_ops,},
+};
+
+static irqreturn_t tis_int_probe(int irq, void *dev_id, struct pt_regs *regs)
+{
+	struct tpm_chip *chip = (struct tpm_chip *) dev_id;
+	u32 interrupt;
+
+	interrupt = ioread32(chip->vendor.iobase +
+			     TPM_INT_STATUS(chip->vendor.locality));
+
+	if (interrupt == 0)
+		return IRQ_NONE;
+
+	chip->vendor.irq = irq;
+
+	/* Clear interrupts handled with TPM_EOI */
+	iowrite32(interrupt,
+		  chip->vendor.iobase +
+		  TPM_INT_STATUS(chip->vendor.locality));
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t tis_int_handler(int irq, void *dev_id, struct pt_regs *regs)
+{
+	struct tpm_chip *chip = (struct tpm_chip *) dev_id;
+	u32 interrupt;
+	int i;
+
+	interrupt = ioread32(chip->vendor.iobase +
+			     TPM_INT_STATUS(chip->vendor.locality));
+
+	if (interrupt == 0)
+		return IRQ_NONE;
+
+	if (interrupt & TPM_INTF_DATA_AVAIL_INT)
+		wake_up_interruptible(&chip->vendor.read_queue);
+	if (interrupt & TPM_INTF_LOCALITY_CHANGE_INT)
+		for (i = 0; i < 5; i++)
+			if (check_locality(chip, i) >= 0)
+				break;
+	if (interrupt &
+	    (TPM_INTF_LOCALITY_CHANGE_INT | TPM_INTF_STS_VALID_INT |
+	     TPM_INTF_CMD_READY_INT))
+		wake_up_interruptible(&chip->vendor.int_queue);
+
+	/* Clear interrupts handled with TPM_EOI */
+	iowrite32(interrupt,
+		  chip->vendor.iobase +
+		  TPM_INT_STATUS(chip->vendor.locality));
+	return IRQ_HANDLED;
+}
+
+static int interrupts = 1;
+module_param(interrupts, bool, 0444);
+MODULE_PARM_DESC(interrupts, "Enable interrupts");
+
+static int __devinit tpm_tis_pnp_init(struct pnp_dev *pnp_dev,
+				      const struct pnp_device_id *pnp_id)
+{
+	u32 vendor, intfcaps, intmask;
+	int rc, i;
+	unsigned long start, len;
+	struct tpm_chip *chip;
+
+	start = pnp_mem_start(pnp_dev, 0);
+	len = pnp_mem_len(pnp_dev, 0);
+
+	if (!start)
+		start = TIS_MEM_BASE;
+	if (!len)
+		len = TIS_MEM_LEN;
+
+	if (!(chip = tpm_register_hardware(&pnp_dev->dev, &tpm_tis)))
+		return -ENODEV;
+
+	chip->vendor.iobase = ioremap(start, len);
+	if (!chip->vendor.iobase) {
+		rc = -EIO;
+		goto out_err;
+	}
+
+	vendor = ioread32(chip->vendor.iobase + TPM_DID_VID(0));
+
+	/* Default timeouts */
+	chip->vendor.timeout_a = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
+	chip->vendor.timeout_b = msecs_to_jiffies(TIS_LONG_TIMEOUT);
+	chip->vendor.timeout_c = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
+	chip->vendor.timeout_d = msecs_to_jiffies(TIS_SHORT_TIMEOUT);
+
+	dev_info(&pnp_dev->dev,
+		 "1.2 TPM (device-id 0x%X, rev-id %d)\n",
+		 vendor >> 16, ioread8(chip->vendor.iobase + TPM_RID(0)));
+
+	/* Figure out the capabilities */
+	intfcaps =
+	    ioread32(chip->vendor.iobase +
+		     TPM_INTF_CAPS(chip->vendor.locality));
+	dev_dbg(&pnp_dev->dev, "TPM interface capabilities (0x%x):\n",
+		intfcaps);
+	if (intfcaps & TPM_INTF_BURST_COUNT_STATIC)
+		dev_dbg(&pnp_dev->dev, "\tBurst Count Static\n");
+	if (intfcaps & TPM_INTF_CMD_READY_INT)
+		dev_dbg(&pnp_dev->dev, "\tCommand Ready Int Support\n");
+	if (intfcaps & TPM_INTF_INT_EDGE_FALLING)
+		dev_dbg(&pnp_dev->dev, "\tInterrupt Edge Falling\n");
+	if (intfcaps & TPM_INTF_INT_EDGE_RISING)
+		dev_dbg(&pnp_dev->dev, "\tInterrupt Edge Rising\n");
+	if (intfcaps & TPM_INTF_INT_LEVEL_LOW)
+		dev_dbg(&pnp_dev->dev, "\tInterrupt Level Low\n");
+	if (intfcaps & TPM_INTF_INT_LEVEL_HIGH)
+		dev_dbg(&pnp_dev->dev, "\tInterrupt Level High\n");
+	if (intfcaps & TPM_INTF_LOCALITY_CHANGE_INT)
+		dev_dbg(&pnp_dev->dev, "\tLocality Change Int Support\n");
+	if (intfcaps & TPM_INTF_STS_VALID_INT)
+		dev_dbg(&pnp_dev->dev, "\tSts Valid Int Support\n");
+	if (intfcaps & TPM_INTF_DATA_AVAIL_INT)
+		dev_dbg(&pnp_dev->dev, "\tData Avail Int Support\n");
+
+	if (request_locality(chip, 0) != 0) {
+		rc = -ENODEV;
+		goto out_err;
+	}
+
+	/* INTERRUPT Setup */
+	init_waitqueue_head(&chip->vendor.read_queue);
+	init_waitqueue_head(&chip->vendor.int_queue);
+
+	intmask =
+	    ioread32(chip->vendor.iobase +
+		     TPM_INT_ENABLE(chip->vendor.locality));
+
+	intmask |= TPM_INTF_CMD_READY_INT
+	    | TPM_INTF_LOCALITY_CHANGE_INT | TPM_INTF_DATA_AVAIL_INT
+	    | TPM_INTF_STS_VALID_INT;
+
+	iowrite32(intmask,
+		  chip->vendor.iobase +
+		  TPM_INT_ENABLE(chip->vendor.locality));
+	if (interrupts) {
+		chip->vendor.irq =
+		    ioread8(chip->vendor.iobase +
+			    TPM_INT_VECTOR(chip->vendor.locality));
+
+		for (i = 3; i < 16 && chip->vendor.irq == 0; i++) {
+			iowrite8(i, chip->vendor.iobase +
+				    TPM_INT_VECTOR(chip->vendor.locality));
+			if (request_irq
+			    (i, tis_int_probe, SA_SHIRQ,
+			     chip->vendor.miscdev.name, chip) != 0) {
+				dev_info(chip->dev,
+					 "Unable to request irq: %d for probe\n",
+					 i);
+				continue;
+			}
+
+			/* Clear all existing */
+			iowrite32(ioread32
+				  (chip->vendor.iobase +
+				   TPM_INT_STATUS(chip->vendor.locality)),
+				  chip->vendor.iobase +
+				  TPM_INT_STATUS(chip->vendor.locality));
+
+			/* Turn on */
+			iowrite32(intmask | TPM_GLOBAL_INT_ENABLE,
+				  chip->vendor.iobase +
+				  TPM_INT_ENABLE(chip->vendor.locality));
+
+			/* Generate Interrupts */
+			tpm_gen_interrupt(chip);
+
+			/* Turn off */
+			iowrite32(intmask,
+				  chip->vendor.iobase +
+				  TPM_INT_ENABLE(chip->vendor.locality));
+			free_irq(i, chip);
+		}
+	}
+	if (chip->vendor.irq) {
+		iowrite8(chip->vendor.irq,
+			 chip->vendor.iobase +
+			 TPM_INT_VECTOR(chip->vendor.locality));
+		if (request_irq
+		    (chip->vendor.irq, tis_int_handler, SA_SHIRQ,
+		     chip->vendor.miscdev.name, chip) != 0) {
+			dev_info(chip->dev,
+				 "Unable to request irq: %d for use\n",
+				 chip->vendor.irq);
+			chip->vendor.irq = 0;
+		} else {
+			/* Clear all existing */
+			iowrite32(ioread32
+				  (chip->vendor.iobase +
+				   TPM_INT_STATUS(chip->vendor.locality)),
+				  chip->vendor.iobase +
+				  TPM_INT_STATUS(chip->vendor.locality));
+
+			/* Turn on */
+			iowrite32(intmask | TPM_GLOBAL_INT_ENABLE,
+				  chip->vendor.iobase +
+				  TPM_INT_ENABLE(chip->vendor.locality));
+		}
+	}
+
+	INIT_LIST_HEAD(&chip->vendor.list);
+	spin_lock(&tis_lock);
+	list_add(&chip->vendor.list, &tis_chips);
+	spin_unlock(&tis_lock);
+
+	tpm_get_timeouts(chip);
+	tpm_continue_selftest(chip);
+
+	return 0;
+out_err:
+	if (chip->vendor.iobase)
+		iounmap(chip->vendor.iobase);
+	tpm_remove_hardware(chip->dev);
+	return rc;
+}
+
+static int tpm_tis_pnp_suspend(struct pnp_dev *dev, pm_message_t msg)
+{
+	return tpm_pm_suspend(&dev->dev, msg);
+}
+
+static int tpm_tis_pnp_resume(struct pnp_dev *dev)
+{
+	return tpm_pm_resume(&dev->dev);
+}
+
+static struct pnp_device_id tpm_pnp_tbl[] __devinitdata = {
+	{"PNP0C31", 0},		/* TPM */
+	{"ATM1200", 0},		/* Atmel */
+	{"IFX0102", 0},		/* Infineon */
+	{"BCM0101", 0},		/* Broadcom */
+	{"NSC1200", 0},		/* National */
+	/* Add new here */
+	{"", 0},		/* User Specified */
+	{"", 0}			/* Terminator */
+};
+
+static struct pnp_driver tis_pnp_driver = {
+	.name = "tpm_tis",
+	.id_table = tpm_pnp_tbl,
+	.probe = tpm_tis_pnp_init,
+	.suspend = tpm_tis_pnp_suspend,
+	.resume = tpm_tis_pnp_resume,
+};
+
+#define TIS_HID_USR_IDX sizeof(tpm_pnp_tbl)/sizeof(struct pnp_device_id) -2
+module_param_string(hid, tpm_pnp_tbl[TIS_HID_USR_IDX].id,
+		    sizeof(tpm_pnp_tbl[TIS_HID_USR_IDX].id), 0444);
+MODULE_PARM_DESC(hid, "Set additional specific HID for this driver to probe");
+
+static int __init init_tis(void)
+{
+	return pnp_register_driver(&tis_pnp_driver);
+}
+
+static void __exit cleanup_tis(void)
+{
+	struct tpm_vendor_specific *i, *j;
+	struct tpm_chip *chip;
+	spin_lock(&tis_lock);
+	list_for_each_entry_safe(i, j, &tis_chips, list) {
+		chip = to_tpm_chip(i);
+		iowrite32(~TPM_GLOBAL_INT_ENABLE &
+			  ioread32(chip->vendor.iobase +
+				   TPM_INT_ENABLE(chip->vendor.
+						  locality)),
+			  chip->vendor.iobase +
+			  TPM_INT_ENABLE(chip->vendor.locality));
+		release_locality(chip, chip->vendor.locality, 1);
+		if (chip->vendor.irq)
+			free_irq(chip->vendor.irq, chip);
+		iounmap(i->iobase);
+		list_del(&i->list);
+		tpm_remove_hardware(chip->dev);
+	}
+	spin_unlock(&tis_lock);
+	pnp_unregister_driver(&tis_pnp_driver);
+}
+
+module_init(init_tis);
+module_exit(cleanup_tis);
+MODULE_AUTHOR("Leendert van Doorn (leendert@watson.ibm.com)");
+MODULE_DESCRIPTION("TPM Driver");
+MODULE_VERSION("2.0");
+MODULE_LICENSE("GPL");
diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
index f70a47eadb52..a88b94a82b14 100644
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -398,7 +398,7 @@ int tty_insert_flip_string_flags(struct tty_struct *tty,
 	while (unlikely(size > copied));
 	return copied;
 }
-EXPORT_SYMBOL_GPL(tty_insert_flip_string_flags);
+EXPORT_SYMBOL(tty_insert_flip_string_flags);
 
 void tty_schedule_flip(struct tty_struct *tty)
 {
@@ -2723,7 +2723,11 @@ static void __do_SAK(void *arg)
 		}
 		task_lock(p);
 		if (p->files) {
-			rcu_read_lock();
+			/*
+			 * We don't take a ref to the file, so we must
+			 * hold ->file_lock instead.
+			 */
+			spin_lock(&p->files->file_lock);
 			fdt = files_fdtable(p->files);
 			for (i=0; i < fdt->max_fds; i++) {
 				filp = fcheck_files(p->files, i);
@@ -2734,11 +2738,11 @@ static void __do_SAK(void *arg)
 					printk(KERN_NOTICE "SAK: killed process %d"
 					    " (%s): fd#%d opened to the tty\n",
 					    p->pid, p->comm, i);
-					send_sig(SIGKILL, p, 1);
+					force_sig(SIGKILL, p);
 					break;
 				}
 			}
-			rcu_read_unlock();
+			spin_unlock(&p->files->file_lock);
 		}
 		task_unlock(p);
 	} while_each_thread(g, p);
diff --git a/drivers/char/vt.c b/drivers/char/vt.c
index acc5d47844eb..6c94879e0b99 100644
--- a/drivers/char/vt.c
+++ b/drivers/char/vt.c
@@ -3238,14 +3238,6 @@ void vcs_scr_writew(struct vc_data *vc, u16 val, u16 *org)
 	}
 }
 
-int is_console_suspend_safe(void)
-{
-	/* It is unsafe to suspend devices while X has control of the
-	 * hardware. Make sure we are running on a kernel-controlled console.
-	 */
-	return vc_cons[fg_console].d->vc_mode == KD_TEXT;
-}
-
 /*
  *	Visible symbols for modules
  */
diff --git a/drivers/char/watchdog/i8xx_tco.c b/drivers/char/watchdog/i8xx_tco.c
index a13395e2c372..fa2ba9ebe42a 100644
--- a/drivers/char/watchdog/i8xx_tco.c
+++ b/drivers/char/watchdog/i8xx_tco.c
@@ -33,11 +33,6 @@
  *	82801E   (C-ICH)  : document number 273599-001, 273645-002,
  *	82801EB  (ICH5)   : document number 252516-001, 252517-003,
  *	82801ER  (ICH5R)  : document number 252516-001, 252517-003,
- *	82801FB  (ICH6)   : document number 301473-002, 301474-007,
- *	82801FR  (ICH6R)  : document number 301473-002, 301474-007,
- *	82801FBM (ICH6-M) : document number 301473-002, 301474-007,
- *	82801FW  (ICH6W)  : document number 301473-001, 301474-007,
- *	82801FRW (ICH6RW) : document number 301473-001, 301474-007
  *
  *  20000710 Nils Faerber
  *	Initial Version 0.01
@@ -66,6 +61,10 @@
  *  20050807 Wim Van Sebroeck <wim@iguana.be>
  *	0.08 Make sure that the watchdog is only "armed" when started.
  *	     (Kernel Bug 4251)
+ *  20060416 Wim Van Sebroeck <wim@iguana.be>
+ *	0.09 Remove support for the ICH6, ICH6R, ICH6-M, ICH6W and ICH6RW and
+ *	     ICH7 chipsets. (See Kernel Bug 6031 - other code will support these
+ *	     chipsets)
  */
 
 /*
@@ -90,7 +89,7 @@
 #include "i8xx_tco.h"
 
 /* Module and version information */
-#define TCO_VERSION "0.08"
+#define TCO_VERSION "0.09"
 #define TCO_MODULE_NAME "i8xx TCO timer"
 #define TCO_DRIVER_NAME   TCO_MODULE_NAME ", v" TCO_VERSION
 #define PFX TCO_MODULE_NAME ": "
@@ -391,11 +390,6 @@ static struct pci_device_id i8xx_tco_pci_tbl[] = {
 	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12,	PCI_ANY_ID, PCI_ANY_ID, },
 	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801E_0,	PCI_ANY_ID, PCI_ANY_ID, },
 	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0,	PCI_ANY_ID, PCI_ANY_ID, },
-	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_0,	PCI_ANY_ID, PCI_ANY_ID, },
-	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1,	PCI_ANY_ID, PCI_ANY_ID, },
-	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_2,	PCI_ANY_ID, PCI_ANY_ID, },
-	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_0,	PCI_ANY_ID, PCI_ANY_ID, },
-	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_1,	PCI_ANY_ID, PCI_ANY_ID, },
 	{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_1,	PCI_ANY_ID, PCI_ANY_ID, },
 	{ 0, },			/* End of list */
 };
diff --git a/drivers/char/watchdog/s3c2410_wdt.c b/drivers/char/watchdog/s3c2410_wdt.c
index 9dc54736e4eb..1ea04e9b2b0b 100644
--- a/drivers/char/watchdog/s3c2410_wdt.c
+++ b/drivers/char/watchdog/s3c2410_wdt.c
@@ -423,6 +423,12 @@ static int s3c2410wdt_probe(struct platform_device *pdev)
 	if (tmr_atboot && started == 0) {
 		printk(KERN_INFO PFX "Starting Watchdog Timer\n");
 		s3c2410wdt_start();
+	} else if (!tmr_atboot) {
+		/* if we're not enabling the watchdog, then ensure it is
+		 * disabled if it has been left running from the bootloader
+		 * or other source */
+
+		s3c2410wdt_stop();
 	}
 
 	return 0;
diff --git a/drivers/char/watchdog/sc1200wdt.c b/drivers/char/watchdog/sc1200wdt.c
index 515ce7572049..20b88f9b7be2 100644
--- a/drivers/char/watchdog/sc1200wdt.c
+++ b/drivers/char/watchdog/sc1200wdt.c
@@ -377,7 +377,7 @@ static int __init sc1200wdt_init(void)
 {
 	int ret;
 
-	printk(banner);
+	printk("%s\n", banner);
 
 	spin_lock_init(&sc1200wdt_lock);
 	sema_init(&open_sem, 1);
diff --git a/drivers/cpufreq/Kconfig b/drivers/cpufreq/Kconfig
index 60c9be99c6d9..2cc71b66231e 100644
--- a/drivers/cpufreq/Kconfig
+++ b/drivers/cpufreq/Kconfig
@@ -99,7 +99,7 @@ config CPU_FREQ_GOV_USERSPACE
 	  Enable this cpufreq governor when you either want to set the
 	  CPU frequency manually or when an userspace program shall
 	  be able to set the CPU dynamically, like on LART 
-	  <http://www.lart.tudelft.nl/>
+	  <http://www.lartmaker.nl/>.
 
 	  For details, take a look at <file:Documentation/cpu-freq/>.
 
diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index 9b6ae7dc8b8a..29b2fa5534ae 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -319,7 +319,6 @@ out:
 	}
 	return -EINVAL;
 }
-EXPORT_SYMBOL_GPL(cpufreq_parse_governor);
 
 
 /* drivers/base/cpu.c */
@@ -346,6 +345,8 @@ show_one(scaling_min_freq, min);
 show_one(scaling_max_freq, max);
 show_one(scaling_cur_freq, cur);
 
+static int __cpufreq_set_policy(struct cpufreq_policy *data, struct cpufreq_policy *policy);
+
 /**
  * cpufreq_per_cpu_attr_write() / store_##file_name() - sysfs write access
  */
@@ -364,7 +365,10 @@ static ssize_t store_##file_name					\
 	if (ret != 1)							\
 		return -EINVAL;						\
 									\
-	ret = cpufreq_set_policy(&new_policy);				\
+	mutex_lock(&policy->lock);					\
+	ret = __cpufreq_set_policy(policy, &new_policy);		\
+	policy->user_policy.object = policy->object;			\
+	mutex_unlock(&policy->lock);					\
 									\
 	return ret ? ret : count;					\
 }
@@ -420,7 +424,15 @@ static ssize_t store_scaling_governor (struct cpufreq_policy * policy,
 	if (cpufreq_parse_governor(str_governor, &new_policy.policy, &new_policy.governor))
 		return -EINVAL;
 
-	ret = cpufreq_set_policy(&new_policy);
+	/* Do not use cpufreq_set_policy here or the user_policy.max
+	   will be wrongly overridden */
+	mutex_lock(&policy->lock);
+	ret = __cpufreq_set_policy(policy, &new_policy);
+
+	policy->user_policy.policy = policy->policy;
+	policy->user_policy.governor = policy->governor;
+	mutex_unlock(&policy->lock);
+
 	return ret ? ret : count;
 }
 
@@ -685,7 +697,7 @@ static int cpufreq_add_dev (struct sys_device * sys_dev)
 		if (!cpu_online(j))
 			continue;
 
-		dprintk("CPU already managed, adding link\n");
+		dprintk("CPU %u already managed, adding link\n", j);
 		cpufreq_cpu_get(cpu);
 		cpu_sys_dev = get_cpu_sysdev(j);
 		sysfs_create_link(&cpu_sys_dev->kobj, &policy->kobj,
@@ -695,9 +707,8 @@ static int cpufreq_add_dev (struct sys_device * sys_dev)
 	policy->governor = NULL; /* to assure that the starting sequence is
 				  * run in cpufreq_set_policy */
 	mutex_unlock(&policy->lock);
-	
+
 	/* set default policy */
-	
 	ret = cpufreq_set_policy(&new_policy);
 	if (ret) {
 		dprintk("setting policy failed\n");
@@ -707,7 +718,7 @@ static int cpufreq_add_dev (struct sys_device * sys_dev)
 	module_put(cpufreq_driver->owner);
 	dprintk("initialization complete\n");
 	cpufreq_debug_enable_ratelimit();
-	
+
 	return 0;
 
 
@@ -1486,7 +1497,7 @@ int cpufreq_update_policy(unsigned int cpu)
 }
 EXPORT_SYMBOL(cpufreq_update_policy);
 
-static int __cpuinit cpufreq_cpu_callback(struct notifier_block *nfb,
+static int cpufreq_cpu_callback(struct notifier_block *nfb,
 					unsigned long action, void *hcpu)
 {
 	unsigned int cpu = (unsigned long)hcpu;
diff --git a/drivers/cpufreq/cpufreq_conservative.c b/drivers/cpufreq/cpufreq_conservative.c
index 037f6bf4543c..e07a35487bde 100644
--- a/drivers/cpufreq/cpufreq_conservative.c
+++ b/drivers/cpufreq/cpufreq_conservative.c
@@ -176,8 +176,7 @@ static ssize_t store_up_threshold(struct cpufreq_policy *unused,
 	ret = sscanf (buf, "%u", &input);
 
 	mutex_lock(&dbs_mutex);
-	if (ret != 1 || input > 100 || input < 0 ||
-			input <= dbs_tuners_ins.down_threshold) {
+	if (ret != 1 || input > 100 || input <= dbs_tuners_ins.down_threshold) {
 		mutex_unlock(&dbs_mutex);
 		return -EINVAL;
 	}
@@ -196,8 +195,7 @@ static ssize_t store_down_threshold(struct cpufreq_policy *unused,
 	ret = sscanf (buf, "%u", &input);
 
 	mutex_lock(&dbs_mutex);
-	if (ret != 1 || input > 100 || input < 0 ||
-			input >= dbs_tuners_ins.up_threshold) {
+	if (ret != 1 || input > 100 || input >= dbs_tuners_ins.up_threshold) {
 		mutex_unlock(&dbs_mutex);
 		return -EINVAL;
 	}
diff --git a/drivers/cpufreq/cpufreq_ondemand.c b/drivers/cpufreq/cpufreq_ondemand.c
index 956d121cb161..3e6ffcaa5af4 100644
--- a/drivers/cpufreq/cpufreq_ondemand.c
+++ b/drivers/cpufreq/cpufreq_ondemand.c
@@ -74,6 +74,8 @@ static unsigned int dbs_enable;	/* number of CPUs using this policy */
 static DEFINE_MUTEX (dbs_mutex);
 static DECLARE_WORK	(dbs_work, do_dbs_timer, NULL);
 
+static struct workqueue_struct *dbs_workq;
+
 struct dbs_tuners {
 	unsigned int sampling_rate;
 	unsigned int sampling_down_factor;
@@ -364,23 +366,29 @@ static void do_dbs_timer(void *data)
 	mutex_lock(&dbs_mutex);
 	for_each_online_cpu(i)
 		dbs_check_cpu(i);
-	schedule_delayed_work(&dbs_work,
-			usecs_to_jiffies(dbs_tuners_ins.sampling_rate));
+	queue_delayed_work(dbs_workq, &dbs_work,
+			   usecs_to_jiffies(dbs_tuners_ins.sampling_rate));
 	mutex_unlock(&dbs_mutex);
 }
 
 static inline void dbs_timer_init(void)
 {
 	INIT_WORK(&dbs_work, do_dbs_timer, NULL);
-	schedule_delayed_work(&dbs_work,
-			usecs_to_jiffies(dbs_tuners_ins.sampling_rate));
+	if (!dbs_workq)
+		dbs_workq = create_singlethread_workqueue("ondemand");
+	if (!dbs_workq) {
+		printk(KERN_ERR "ondemand: Cannot initialize kernel thread\n");
+		return;
+	}
+	queue_delayed_work(dbs_workq, &dbs_work,
+			   usecs_to_jiffies(dbs_tuners_ins.sampling_rate));
 	return;
 }
 
 static inline void dbs_timer_exit(void)
 {
-	cancel_delayed_work(&dbs_work);
-	return;
+	if (dbs_workq)
+		cancel_rearming_delayed_workqueue(dbs_workq, &dbs_work);
 }
 
 static int cpufreq_governor_dbs(struct cpufreq_policy *policy,
@@ -489,8 +497,12 @@ static int __init cpufreq_gov_dbs_init(void)
 
 static void __exit cpufreq_gov_dbs_exit(void)
 {
-	/* Make sure that the scheduled work is indeed not running */
-	flush_scheduled_work();
+	/* Make sure that the scheduled work is indeed not running.
+	   Assumes the timer has been cancelled first. */
+	if (dbs_workq) {
+		flush_workqueue(dbs_workq);
+		destroy_workqueue(dbs_workq);
+	}
 
 	cpufreq_unregister_governor(&cpufreq_gov_dbs);
 }
diff --git a/drivers/edac/e752x_edac.c b/drivers/edac/e752x_edac.c
index 66572c5323ad..fce31936e6d7 100644
--- a/drivers/edac/e752x_edac.c
+++ b/drivers/edac/e752x_edac.c
@@ -25,6 +25,8 @@
 #include <linux/slab.h>
 #include "edac_mc.h"
 
+static int force_function_unhide;
+
 #define e752x_printk(level, fmt, arg...) \
 	edac_printk(level, "e752x", fmt, ##arg)
 
@@ -782,8 +784,16 @@ static int e752x_probe1(struct pci_dev *pdev, int dev_idx)
 	debugf0("%s(): mci\n", __func__);
 	debugf0("Starting Probe1\n");
 
-	/* enable device 0 function 1 */
+	/* check to see if device 0 function 1 is enabled; if it isn't, we
+	 * assume the BIOS has reserved it for a reason and is expecting
+	 * exclusive access, we take care not to violate that assumption and
+	 * fail the probe. */
 	pci_read_config_byte(pdev, E752X_DEVPRES1, &stat8);
+	if (!force_function_unhide && !(stat8 & (1 << 5))) {
+		printk(KERN_INFO "Contact your BIOS vendor to see if the "
+			"E752x error registers can be safely un-hidden\n");
+		goto fail;
+	}
 	stat8 |= (1 << 5);
 	pci_write_config_byte(pdev, E752X_DEVPRES1, stat8);
 
@@ -1063,3 +1073,8 @@ module_exit(e752x_exit);
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Linux Networx (http://lnxi.com) Tom Zimmerman\n");
 MODULE_DESCRIPTION("MC support for Intel e752x memory controllers");
+
+module_param(force_function_unhide, int, 0444);
+MODULE_PARM_DESC(force_function_unhide, "if BIOS sets Dev0:Fun1 up as hidden:"
+" 1=force unhide and hope BIOS doesn't fight driver for Dev0:Fun1 access");
+
diff --git a/drivers/firmware/Makefile b/drivers/firmware/Makefile
index 85429979d0db..98e395f4bb29 100644
--- a/drivers/firmware/Makefile
+++ b/drivers/firmware/Makefile
@@ -1,7 +1,8 @@
 #
 # Makefile for the linux kernel.
 #
-obj-$(CONFIG_EDD)             	+= edd.o
+obj-$(CONFIG_DMI)		+= dmi_scan.o
+obj-$(CONFIG_EDD)		+= edd.o
 obj-$(CONFIG_EFI_VARS)		+= efivars.o
 obj-$(CONFIG_EFI_PCDP)		+= pcdp.o
 obj-$(CONFIG_DELL_RBU)          += dell_rbu.o
diff --git a/arch/i386/kernel/dmi_scan.c b/drivers/firmware/dmi_scan.c
index 5efceebc48dc..948bd7e1445a 100644
--- a/arch/i386/kernel/dmi_scan.c
+++ b/drivers/firmware/dmi_scan.c
@@ -27,7 +27,7 @@ static char * __init dmi_string(struct dmi_header *dm, u8 s)
 			else
 				printk(KERN_ERR "dmi_string: out of memory.\n");
 		}
- 	}
+	}
 
 	return str;
 }
@@ -41,7 +41,7 @@ static int __init dmi_table(u32 base, int len, int num,
 {
 	u8 *buf, *data;
 	int i = 0;
-		
+
 	buf = dmi_ioremap(base, len);
 	if (buf == NULL)
 		return -1;
@@ -49,9 +49,9 @@ static int __init dmi_table(u32 base, int len, int num,
 	data = buf;
 
 	/*
- 	 *	Stop when we see all the items the table claimed to have
- 	 *	OR we run off the end of the table (also happens)
- 	 */
+	 *	Stop when we see all the items the table claimed to have
+	 *	OR we run off the end of the table (also happens)
+	 */
 	while ((i < num) && (data - buf + sizeof(struct dmi_header)) <= len) {
 		struct dmi_header *dm = (struct dmi_header *)data;
 		/*
@@ -75,7 +75,7 @@ static int __init dmi_checksum(u8 *buf)
 {
 	u8 sum = 0;
 	int a;
-	
+
 	for (a = 0; a < 15; a++)
 		sum += buf[a];
 
diff --git a/drivers/hwmon/w83792d.c b/drivers/hwmon/w83792d.c
index 6865c64d8a51..958602e28412 100644
--- a/drivers/hwmon/w83792d.c
+++ b/drivers/hwmon/w83792d.c
@@ -1161,7 +1161,7 @@ w83792d_detect(struct i2c_adapter *adapter, int address, int kind)
 	   bank. */
 	if (kind < 0) {
 		if (w83792d_read_value(client, W83792D_REG_CONFIG) & 0x80) {
-			dev_warn(dev, "Detection failed at step 3\n");
+			dev_dbg(dev, "Detection failed at step 1\n");
 			goto ERROR1;
 		}
 		val1 = w83792d_read_value(client, W83792D_REG_BANK);
@@ -1170,6 +1170,7 @@ w83792d_detect(struct i2c_adapter *adapter, int address, int kind)
 		if (!(val1 & 0x07)) {  /* is Bank0 */
 			if (((!(val1 & 0x80)) && (val2 != 0xa3)) ||
 			     ((val1 & 0x80) && (val2 != 0x5c))) {
+				dev_dbg(dev, "Detection failed at step 2\n");
 				goto ERROR1;
 			}
 		}
@@ -1177,7 +1178,7 @@ w83792d_detect(struct i2c_adapter *adapter, int address, int kind)
 		   should match */
 		if (w83792d_read_value(client,
 					W83792D_REG_I2C_ADDR) != address) {
-			dev_warn(dev, "Detection failed at step 5\n");
+			dev_dbg(dev, "Detection failed at step 3\n");
 			goto ERROR1;
 		}
 	}
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 089c6f5b24de..d6d44946a283 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -286,7 +286,10 @@ config I2C_PARPORT
 	  This driver is a replacement for (and was inspired by) an older
 	  driver named i2c-philips-par.  The new driver supports more devices,
 	  and makes it easier to add support for new devices.
-	  
+
+	  An adapter type parameter is now mandatory.  Please read the file
+	  Documentation/i2c/busses/i2c-parport for details.
+
 	  Another driver exists, named i2c-parport-light, which doesn't depend
 	  on the parport driver.  This is meant for embedded systems. Don't say
 	  Y here if you intend to say Y or M there.
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index 8e0f3158215f..dfca74933625 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -478,6 +478,11 @@ static s32 i801_access(struct i2c_adapter * adap, u16 addr,
 		ret = i801_transaction();
 	}
 
+	/* Some BIOSes don't like it when PEC is enabled at reboot or resume
+	   time, so we forcibly disable it after every transaction. */
+	if (hwpec)
+		outb_p(0, SMBAUXCTL);
+
 	if(block)
 		return ret;
 	if(ret)
diff --git a/drivers/i2c/busses/i2c-parport-light.c b/drivers/i2c/busses/i2c-parport-light.c
index c63025a4c861..e09ebbb2f9f0 100644
--- a/drivers/i2c/busses/i2c-parport-light.c
+++ b/drivers/i2c/busses/i2c-parport-light.c
@@ -121,9 +121,14 @@ static struct i2c_adapter parport_adapter = {
 
 static int __init i2c_parport_init(void)
 {
-	if (type < 0 || type >= ARRAY_SIZE(adapter_parm)) {
+	if (type < 0) {
+		printk(KERN_WARNING "i2c-parport: adapter type unspecified\n");
+		return -ENODEV;
+	}
+
+	if (type >= ARRAY_SIZE(adapter_parm)) {
 		printk(KERN_WARNING "i2c-parport: invalid type (%d)\n", type);
-		type = 0;
+		return -ENODEV;
 	}
 
 	if (base == 0) {
diff --git a/drivers/i2c/busses/i2c-parport.c b/drivers/i2c/busses/i2c-parport.c
index 7e2e8cd1c14a..934bd55bae15 100644
--- a/drivers/i2c/busses/i2c-parport.c
+++ b/drivers/i2c/busses/i2c-parport.c
@@ -241,9 +241,14 @@ static struct parport_driver i2c_parport_driver = {
 
 static int __init i2c_parport_init(void)
 {
-	if (type < 0 || type >= ARRAY_SIZE(adapter_parm)) {
+	if (type < 0) {
+		printk(KERN_WARNING "i2c-parport: adapter type unspecified\n");
+		return -ENODEV;
+	}
+
+	if (type >= ARRAY_SIZE(adapter_parm)) {
 		printk(KERN_WARNING "i2c-parport: invalid type (%d)\n", type);
-		type = 0;
+		return -ENODEV;
 	}
 
 	return parport_register_driver(&i2c_parport_driver);
diff --git a/drivers/i2c/busses/i2c-parport.h b/drivers/i2c/busses/i2c-parport.h
index d702e5e0388d..9ddd816d5d0f 100644
--- a/drivers/i2c/busses/i2c-parport.h
+++ b/drivers/i2c/busses/i2c-parport.h
@@ -90,7 +90,7 @@ static struct adapter_parm adapter_parm[] = {
 	},
 };
 
-static int type;
+static int type = -1;
 module_param(type, int, 0);
 MODULE_PARM_DESC(type,
 	"Type of adapter:\n"
diff --git a/drivers/i2c/busses/i2c-sis96x.c b/drivers/i2c/busses/i2c-sis96x.c
index 3024907cdafe..1a73c0532fc7 100644
--- a/drivers/i2c/busses/i2c-sis96x.c
+++ b/drivers/i2c/busses/i2c-sis96x.c
@@ -43,13 +43,6 @@
 #include <linux/init.h>
 #include <asm/io.h>
 
-/*
-	HISTORY:
-	2003-05-11	1.0.0 	Updated from lm_sensors project for kernel 2.5
-				(was i2c-sis645.c from lm_sensors 2.7.0)
-*/
-#define SIS96x_VERSION "1.0.0"
-
 /* base address register in PCI config space */
 #define SIS96x_BAR 0x04
 
@@ -337,7 +330,6 @@ static struct pci_driver sis96x_driver = {
 
 static int __init i2c_sis96x_init(void)
 {
-	printk(KERN_INFO "i2c-sis96x version %s\n", SIS96x_VERSION);
 	return pci_register_driver(&sis96x_driver);
 }
 
diff --git a/drivers/i2c/busses/scx200_acb.c b/drivers/i2c/busses/scx200_acb.c
index 8bd305e47f0d..766cc969c4d0 100644
--- a/drivers/i2c/busses/scx200_acb.c
+++ b/drivers/i2c/busses/scx200_acb.c
@@ -133,6 +133,9 @@ static void scx200_acb_machine(struct scx200_acb_iface *iface, u8 status)
 
 		outb(inb(ACBCTL1) | ACBCTL1_STOP, ACBCTL1);
 		outb(ACBST_STASTR | ACBST_NEGACK, ACBST);
+
+		/* Reset the status register */
+		outb(0, ACBST);
 		return;
 	}
 
@@ -228,6 +231,10 @@ static void scx200_acb_poll(struct scx200_acb_iface *iface)
 	timeout = jiffies + POLL_TIMEOUT;
 	while (time_before(jiffies, timeout)) {
 		status = inb(ACBST);
+
+		/* Reset the status register to avoid the hang */
+		outb(0, ACBST);
+
 		if ((status & (ACBST_SDAST|ACBST_BER|ACBST_NEGACK)) != 0) {
 			scx200_acb_machine(iface, status);
 			return;
@@ -415,7 +422,6 @@ static int  __init scx200_acb_create(const char *text, int base, int index)
 	struct scx200_acb_iface *iface;
 	struct i2c_adapter *adapter;
 	int rc;
-	char description[64];
 
 	iface = kzalloc(sizeof(*iface), GFP_KERNEL);
 	if (!iface) {
@@ -434,10 +440,7 @@ static int  __init scx200_acb_create(const char *text, int base, int index)
 
 	mutex_init(&iface->mutex);
 
-	snprintf(description, sizeof(description), "%s ACCESS.bus [%s]",
-		 text, adapter->name);
-
-	if (request_region(base, 8, description) == 0) {
+	if (!request_region(base, 8, adapter->name)) {
 		printk(KERN_ERR NAME ": can't allocate io 0x%x-0x%x\n",
 			base, base + 8-1);
 		rc = -EBUSY;
@@ -488,7 +491,7 @@ static struct pci_device_id divil_pci[] = {
 
 #define MSR_LBAR_SMB		0x5140000B
 
-static int scx200_add_cs553x(void)
+static __init int scx200_add_cs553x(void)
 {
 	u32	low, hi;
 	u32	smb_base;
@@ -524,6 +527,9 @@ static int __init scx200_acb_init(void)
 	} else if (pci_dev_present(divil_pci))
 		rc = scx200_add_cs553x();
 
+	/* If at least one bus was created, init must succeed */
+	if (scx200_acb_list)
+		return 0;
 	return rc;
 }
 
diff --git a/drivers/i2c/chips/ds1374.c b/drivers/i2c/chips/ds1374.c
index 03d09ed5ec2c..4630f1969a09 100644
--- a/drivers/i2c/chips/ds1374.c
+++ b/drivers/i2c/chips/ds1374.c
@@ -27,6 +27,7 @@
 #include <linux/rtc.h>
 #include <linux/bcd.h>
 #include <linux/mutex.h>
+#include <linux/workqueue.h>
 
 #define DS1374_REG_TOD0		0x00
 #define DS1374_REG_TOD1		0x01
@@ -139,7 +140,7 @@ ulong ds1374_get_rtc_time(void)
 	return t1;
 }
 
-static void ds1374_set_tlet(ulong arg)
+static void ds1374_set_work(void *arg)
 {
 	ulong t1, t2;
 	int limit = 10;		/* arbitrary retry limit */
@@ -168,17 +169,18 @@ static void ds1374_set_tlet(ulong arg)
 
 static ulong new_time;
 
-static DECLARE_TASKLET_DISABLED(ds1374_tasklet, ds1374_set_tlet,
-				(ulong) & new_time);
+static struct workqueue_struct *ds1374_workqueue;
+
+static DECLARE_WORK(ds1374_work, ds1374_set_work, &new_time);
 
 int ds1374_set_rtc_time(ulong nowtime)
 {
 	new_time = nowtime;
 
 	if (in_interrupt())
-		tasklet_schedule(&ds1374_tasklet);
+		queue_work(ds1374_workqueue, &ds1374_work);
 	else
-		ds1374_set_tlet((ulong) & new_time);
+		ds1374_set_work(&new_time);
 
 	return 0;
 }
@@ -204,6 +206,8 @@ static int ds1374_probe(struct i2c_adapter *adap, int addr, int kind)
 	client->adapter = adap;
 	client->driver = &ds1374_driver;
 
+	ds1374_workqueue = create_singlethread_workqueue("ds1374");
+
 	if ((rc = i2c_attach_client(client)) != 0) {
 		kfree(client);
 		return rc;
@@ -227,7 +231,7 @@ static int ds1374_detach(struct i2c_client *client)
 
 	if ((rc = i2c_detach_client(client)) == 0) {
 		kfree(i2c_get_clientdata(client));
-		tasklet_kill(&ds1374_tasklet);
+		destroy_workqueue(ds1374_workqueue);
 	}
 	return rc;
 }
diff --git a/drivers/i2c/chips/m41t00.c b/drivers/i2c/chips/m41t00.c
index b5aabe7cf792..99ab4ec34390 100644
--- a/drivers/i2c/chips/m41t00.c
+++ b/drivers/i2c/chips/m41t00.c
@@ -25,6 +25,7 @@
 #include <linux/rtc.h>
 #include <linux/bcd.h>
 #include <linux/mutex.h>
+#include <linux/workqueue.h>
 
 #include <asm/time.h>
 #include <asm/rtc.h>
@@ -111,7 +112,7 @@ m41t00_get_rtc_time(void)
 }
 
 static void
-m41t00_set_tlet(ulong arg)
+m41t00_set(void *arg)
 {
 	struct rtc_time	tm;
 	ulong	nowtime = *(ulong *)arg;
@@ -130,13 +131,13 @@ m41t00_set_tlet(ulong arg)
 	if ((i2c_smbus_write_byte_data(save_client, 0, tm.tm_sec & 0x7f) < 0)
 		|| (i2c_smbus_write_byte_data(save_client, 1, tm.tm_min & 0x7f)
 			< 0)
-		|| (i2c_smbus_write_byte_data(save_client, 2, tm.tm_hour & 0x7f)
+		|| (i2c_smbus_write_byte_data(save_client, 2, tm.tm_hour & 0x3f)
 			< 0)
-		|| (i2c_smbus_write_byte_data(save_client, 4, tm.tm_mday & 0x7f)
+		|| (i2c_smbus_write_byte_data(save_client, 4, tm.tm_mday & 0x3f)
 			< 0)
-		|| (i2c_smbus_write_byte_data(save_client, 5, tm.tm_mon & 0x7f)
+		|| (i2c_smbus_write_byte_data(save_client, 5, tm.tm_mon & 0x1f)
 			< 0)
-		|| (i2c_smbus_write_byte_data(save_client, 6, tm.tm_year & 0x7f)
+		|| (i2c_smbus_write_byte_data(save_client, 6, tm.tm_year & 0xff)
 			< 0))
 
 		dev_warn(&save_client->dev,"m41t00: can't write to rtc chip\n");
@@ -145,9 +146,9 @@ m41t00_set_tlet(ulong arg)
 	return;
 }
 
-static ulong	new_time;
-
-DECLARE_TASKLET_DISABLED(m41t00_tasklet, m41t00_set_tlet, (ulong)&new_time);
+static ulong new_time;
+static struct workqueue_struct *m41t00_wq;
+static DECLARE_WORK(m41t00_work, m41t00_set, &new_time);
 
 int
 m41t00_set_rtc_time(ulong nowtime)
@@ -155,9 +156,9 @@ m41t00_set_rtc_time(ulong nowtime)
 	new_time = nowtime;
 
 	if (in_interrupt())
-		tasklet_schedule(&m41t00_tasklet);
+		queue_work(m41t00_wq, &m41t00_work);
 	else
-		m41t00_set_tlet((ulong)&new_time);
+		m41t00_set(&new_time);
 
 	return 0;
 }
@@ -189,6 +190,7 @@ m41t00_probe(struct i2c_adapter *adap, int addr, int kind)
 		return rc;
 	}
 
+	m41t00_wq = create_singlethread_workqueue("m41t00");
 	save_client = client;
 	return 0;
 }
@@ -206,7 +208,7 @@ m41t00_detach(struct i2c_client *client)
 
 	if ((rc = i2c_detach_client(client)) == 0) {
 		kfree(client);
-		tasklet_kill(&m41t00_tasklet);
+		destroy_workqueue(m41t00_wq);
 	}
 	return rc;
 }
diff --git a/drivers/ide/legacy/ide-cs.c b/drivers/ide/legacy/ide-cs.c
index 4961f1e764a7..602797a44208 100644
--- a/drivers/ide/legacy/ide-cs.c
+++ b/drivers/ide/legacy/ide-cs.c
@@ -392,6 +392,7 @@ static struct pcmcia_device_id ide_ids[] = {
 	PCMCIA_DEVICE_PROD_ID12("FREECOM", "PCCARD-IDE", 0x5714cbf7, 0x48e0ab8e),
 	PCMCIA_DEVICE_PROD_ID12("HITACHI", "FLASH", 0xf4f43949, 0x9eb86aae),
 	PCMCIA_DEVICE_PROD_ID12("HITACHI", "microdrive", 0xf4f43949, 0xa6d76178),
+	PCMCIA_DEVICE_PROD_ID12("IBM", "microdrive", 0xb569a6e5, 0xa6d76178),
 	PCMCIA_DEVICE_PROD_ID12("IBM", "IBM17JSSFP20", 0xb569a6e5, 0xf2508753),
 	PCMCIA_DEVICE_PROD_ID12("IO DATA", "CBIDE2      ", 0x547e66dc, 0x8671043b),
 	PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDE", 0x547e66dc, 0x5c5ab149),
diff --git a/drivers/ide/pci/alim15x3.c b/drivers/ide/pci/alim15x3.c
index cf84350efc55..8b24b4f2a839 100644
--- a/drivers/ide/pci/alim15x3.c
+++ b/drivers/ide/pci/alim15x3.c
@@ -731,6 +731,8 @@ static unsigned int __devinit ata66_ali15x3 (ide_hwif_t *hwif)
 	
 	if(m5229_revision <= 0x20)
 		tmpbyte = (tmpbyte & (~0x02)) | 0x01;
+	else if (m5229_revision == 0xc7)
+		tmpbyte |= 0x03;
 	else
 		tmpbyte |= 0x01;
 
diff --git a/drivers/ide/pci/atiixp.c b/drivers/ide/pci/atiixp.c
index df9ee9a78435..900efd1da587 100644
--- a/drivers/ide/pci/atiixp.c
+++ b/drivers/ide/pci/atiixp.c
@@ -348,6 +348,7 @@ static struct pci_device_id atiixp_pci_tbl[] = {
 	{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP200_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
 	{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP300_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
 	{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+	{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
 	{ 0, },
 };
 MODULE_DEVICE_TABLE(pci, atiixp_pci_tbl);
diff --git a/drivers/ide/pci/pdc202xx_old.c b/drivers/ide/pci/pdc202xx_old.c
index 6f8f8645b02c..7ce5bf783688 100644
--- a/drivers/ide/pci/pdc202xx_old.c
+++ b/drivers/ide/pci/pdc202xx_old.c
@@ -798,7 +798,6 @@ static ide_pci_device_t pdc202xx_chipsets[] __devinitdata = {
 		.autodma	= AUTODMA,
 		.bootable	= OFF_BOARD,
 		.extra		= 48,
-		.flags		= IDEPCI_FLAG_FORCE_PDC,
 	},{	/* 2 */
 		.name		= "PDC20263",
 		.init_setup	= init_setup_pdc202ata4,
@@ -819,7 +818,6 @@ static ide_pci_device_t pdc202xx_chipsets[] __devinitdata = {
 		.autodma	= AUTODMA,
 		.bootable	= OFF_BOARD,
 		.extra		= 48,
-		.flags		= IDEPCI_FLAG_FORCE_PDC,
 	},{	/* 4 */
 		.name		= "PDC20267",
 		.init_setup	= init_setup_pdc202xx,
diff --git a/drivers/ide/pci/sgiioc4.c b/drivers/ide/pci/sgiioc4.c
index 43b96e298363..27c9eb989a9a 100644
--- a/drivers/ide/pci/sgiioc4.c
+++ b/drivers/ide/pci/sgiioc4.c
@@ -345,17 +345,17 @@ sgiioc4_resetproc(ide_drive_t * drive)
 static u8
 sgiioc4_INB(unsigned long port)
 {
-	u8 reg = (u8) inb(port);
+	u8 reg = (u8) readb((void __iomem *) port);
 
 	if ((port & 0xFFF) == 0x11C) {	/* Status register of IOC4 */
 		if (reg & 0x51) {	/* Not busy...check for interrupt */
 			unsigned long other_ir = port - 0x110;
-			unsigned int intr_reg = (u32) inl(other_ir);
+			unsigned int intr_reg = (u32) readl((void __iomem *) other_ir);
 
 			/* Clear the Interrupt, Error bits on the IOC4 */
 			if (intr_reg & 0x03) {
-				outl(0x03, other_ir);
-				intr_reg = (u32) inl(other_ir);
+				writel(0x03, (void __iomem *) other_ir);
+				intr_reg = (u32) readl((void __iomem *) other_ir);
 			}
 		}
 	}
@@ -606,6 +606,12 @@ ide_init_sgiioc4(ide_hwif_t * hwif)
 	hwif->ide_dma_host_off = &sgiioc4_ide_dma_host_off;
 	hwif->ide_dma_lostirq = &sgiioc4_ide_dma_lostirq;
 	hwif->ide_dma_timeout = &__ide_dma_timeout;
+
+	/*
+	 * The IOC4 uses MMIO rather than Port IO.
+	 * It also needs special workarounds for INB.
+	 */
+	default_hwif_mmiops(hwif);
 	hwif->INB = &sgiioc4_INB;
 }
 
@@ -743,6 +749,6 @@ ioc4_ide_exit(void)
 module_init(ioc4_ide_init);
 module_exit(ioc4_ide_exit);
 
-MODULE_AUTHOR("Aniket Malatpure - Silicon Graphics Inc. (SGI)");
+MODULE_AUTHOR("Aniket Malatpure/Jeremy Higdon");
 MODULE_DESCRIPTION("IDE PCI driver module for SGI IOC4 Base-IO Card");
 MODULE_LICENSE("GPL");
diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c
index 78e30f803671..ffca8b63ee79 100644
--- a/drivers/ide/ppc/pmac.c
+++ b/drivers/ide/ppc/pmac.c
@@ -553,6 +553,8 @@ pmac_ide_init_hwif_ports(hw_regs_t *hw,
 
 	if (irq != NULL)
 		*irq = pmac_ide[ix].irq;
+
+	hw->dev = &pmac_ide[ix].mdev->ofdev.dev;
 }
 
 #define PMAC_IDE_REG(x) ((void __iomem *)(IDE_DATA_REG+(x)))
diff --git a/drivers/ide/setup-pci.c b/drivers/ide/setup-pci.c
index 7ebf992e8c2f..462ed3006c30 100644
--- a/drivers/ide/setup-pci.c
+++ b/drivers/ide/setup-pci.c
@@ -580,7 +580,6 @@ void ide_pci_setup_ports(struct pci_dev *dev, ide_pci_device_t *d, int pciirq, a
 	int port;
 	int at_least_one_hwif_enabled = 0;
 	ide_hwif_t *hwif, *mate = NULL;
-	static int secondpdc = 0;
 	u8 tmp;
 
 	index->all = 0xf0f0;
@@ -592,21 +591,9 @@ void ide_pci_setup_ports(struct pci_dev *dev, ide_pci_device_t *d, int pciirq, a
 	for (port = 0; port <= 1; ++port) {
 		ide_pci_enablebit_t *e = &(d->enablebits[port]);
 	
-		/* 
-		 * If this is a Promise FakeRaid controller,
-		 * the 2nd controller will be marked as 
-		 * disabled while it is actually there and enabled
-		 * by the bios for raid purposes. 
-		 * Skip the normal "is it enabled" test for those.
-		 */
-		if ((d->flags & IDEPCI_FLAG_FORCE_PDC) &&
-		    (secondpdc++==1) && (port==1))
-			goto controller_ok;
-			
 		if (e->reg && (pci_read_config_byte(dev, e->reg, &tmp) ||
 		    (tmp & e->mask) != e->val))
 			continue;	/* port not enabled */
-controller_ok:
 
 		if (d->channels	<= port)
 			break;
diff --git a/drivers/ieee1394/ohci1394.c b/drivers/ieee1394/ohci1394.c
index 19222878aae9..11f13778f139 100644
--- a/drivers/ieee1394/ohci1394.c
+++ b/drivers/ieee1394/ohci1394.c
@@ -553,7 +553,7 @@ static void ohci_initialize(struct ti_ohci *ohci)
 	 * register content.
 	 * To actually enable physical responses is the job of our interrupt
 	 * handler which programs the physical request filter. */
-	reg_write(ohci, OHCI1394_PhyUpperBound, 0xffff0000);
+	reg_write(ohci, OHCI1394_PhyUpperBound, 0x01000000);
 
 	DBGMSG("physUpperBoundOffset=%08x",
 	       reg_read(ohci, OHCI1394_PhyUpperBound));
diff --git a/drivers/ieee1394/sbp2.c b/drivers/ieee1394/sbp2.c
index f4206604db03..5413dc43b9f1 100644
--- a/drivers/ieee1394/sbp2.c
+++ b/drivers/ieee1394/sbp2.c
@@ -42,6 +42,7 @@
 #include <linux/kernel.h>
 #include <linux/list.h>
 #include <linux/string.h>
+#include <linux/stringify.h>
 #include <linux/slab.h>
 #include <linux/interrupt.h>
 #include <linux/fs.h>
@@ -117,7 +118,8 @@ MODULE_PARM_DESC(serialize_io, "Serialize I/O coming from scsi drivers (default
  */
 static int max_sectors = SBP2_MAX_SECTORS;
 module_param(max_sectors, int, 0444);
-MODULE_PARM_DESC(max_sectors, "Change max sectors per I/O supported (default = 255)");
+MODULE_PARM_DESC(max_sectors, "Change max sectors per I/O supported (default = "
+		 __stringify(SBP2_MAX_SECTORS) ")");
 
 /*
  * Exclusive login to sbp2 device? In most cases, the sbp2 driver should
@@ -135,18 +137,45 @@ module_param(exclusive_login, int, 0644);
 MODULE_PARM_DESC(exclusive_login, "Exclusive login to sbp2 device (default = 1)");
 
 /*
- * SCSI inquiry hack for really badly behaved sbp2 devices. Turn this on
- * if your sbp2 device is not properly handling the SCSI inquiry command.
- * This hack makes the inquiry look more like a typical MS Windows inquiry
- * by enforcing 36 byte inquiry and avoiding access to mode_sense page 8.
+ * If any of the following workarounds is required for your device to work,
+ * please submit the kernel messages logged by sbp2 to the linux1394-devel
+ * mailing list.
  *
- * If force_inquiry_hack=1 is required for your device to work,
- * please submit the logged sbp2_firmware_revision value of this device to
- * the linux1394-devel mailing list.
+ * - 128kB max transfer
+ *   Limit transfer size. Necessary for some old bridges.
+ *
+ * - 36 byte inquiry
+ *   When scsi_mod probes the device, let the inquiry command look like that
+ *   from MS Windows.
+ *
+ * - skip mode page 8
+ *   Suppress sending of mode_sense for mode page 8 if the device pretends to
+ *   support the SCSI Primary Block commands instead of Reduced Block Commands.
+ *
+ * - fix capacity
+ *   Tell sd_mod to correct the last sector number reported by read_capacity.
+ *   Avoids access beyond actual disk limits on devices with an off-by-one bug.
+ *   Don't use this with devices which don't have this bug.
+ *
+ * - override internal blacklist
+ *   Instead of adding to the built-in blacklist, use only the workarounds
+ *   specified in the module load parameter.
+ *   Useful if a blacklist entry interfered with a non-broken device.
  */
+static int sbp2_default_workarounds;
+module_param_named(workarounds, sbp2_default_workarounds, int, 0644);
+MODULE_PARM_DESC(workarounds, "Work around device bugs (default = 0"
+	", 128kB max transfer = " __stringify(SBP2_WORKAROUND_128K_MAX_TRANS)
+	", 36 byte inquiry = "    __stringify(SBP2_WORKAROUND_INQUIRY_36)
+	", skip mode page 8 = "   __stringify(SBP2_WORKAROUND_MODE_SENSE_8)
+	", fix capacity = "       __stringify(SBP2_WORKAROUND_FIX_CAPACITY)
+	", override internal blacklist = " __stringify(SBP2_WORKAROUND_OVERRIDE)
+	", or a combination)");
+
+/* legacy parameter */
 static int force_inquiry_hack;
 module_param(force_inquiry_hack, int, 0644);
-MODULE_PARM_DESC(force_inquiry_hack, "Force SCSI inquiry hack (default = 0)");
+MODULE_PARM_DESC(force_inquiry_hack, "Deprecated, use 'workarounds'");
 
 /*
  * Export information about protocols/devices supported by this driver.
@@ -266,14 +295,55 @@ static struct hpsb_protocol_driver sbp2_driver = {
 };
 
 /*
- * List of device firmwares that require the inquiry hack.
- * Yields a few false positives but did not break other devices so far.
+ * List of devices with known bugs.
+ *
+ * The firmware_revision field, masked with 0xffff00, is the best indicator
+ * for the type of bridge chip of a device.  It yields a few false positives
+ * but this did not break correctly behaving devices so far.
  */
-static u32 sbp2_broken_inquiry_list[] = {
-	0x00002800,	/* Stefan Richter <stefanr@s5r6.in-berlin.de> */
-			/* DViCO Momobay CX-1 */
-	0x00000200	/* Andreas Plesch <plesch@fas.harvard.edu> */
-			/* QPS Fire DVDBurner */
+static const struct {
+	u32 firmware_revision;
+	u32 model_id;
+	unsigned workarounds;
+} sbp2_workarounds_table[] = {
+	/* TSB42AA9 */ {
+		.firmware_revision	= 0x002800,
+		.workarounds		= SBP2_WORKAROUND_INQUIRY_36 |
+					  SBP2_WORKAROUND_MODE_SENSE_8,
+	},
+	/* Initio bridges, actually only needed for some older ones */ {
+		.firmware_revision	= 0x000200,
+		.workarounds		= SBP2_WORKAROUND_INQUIRY_36,
+	},
+	/* Symbios bridge */ {
+		.firmware_revision	= 0xa0b800,
+		.workarounds		= SBP2_WORKAROUND_128K_MAX_TRANS,
+	},
+	/*
+	 * Note about the following Apple iPod blacklist entries:
+	 *
+	 * There are iPods (2nd gen, 3rd gen) with model_id==0.  Since our
+	 * matching logic treats 0 as a wildcard, we cannot match this ID
+	 * without rewriting the matching routine.  Fortunately these iPods
+	 * do not feature the read_capacity bug according to one report.
+	 * Read_capacity behaviour as well as model_id could change due to
+	 * Apple-supplied firmware updates though.
+	 */
+	/* iPod 4th generation */ {
+		.firmware_revision	= 0x0a2700,
+		.model_id		= 0x000021,
+		.workarounds		= SBP2_WORKAROUND_FIX_CAPACITY,
+	},
+	/* iPod mini */ {
+		.firmware_revision	= 0x0a2700,
+		.model_id		= 0x000023,
+		.workarounds		= SBP2_WORKAROUND_FIX_CAPACITY,
+	},
+	/* iPod Photo */ {
+		.firmware_revision	= 0x0a2700,
+		.model_id		= 0x00007e,
+		.workarounds		= SBP2_WORKAROUND_FIX_CAPACITY,
+	}
 };
 
 /**************************************
@@ -765,12 +835,17 @@ static struct scsi_id_instance_data *sbp2_alloc_device(struct unit_directory *ud
 
 	/* Register the status FIFO address range. We could use the same FIFO
 	 * for targets at different nodes. However we need different FIFOs per
-	 * target in order to support multi-unit devices. */
+	 * target in order to support multi-unit devices.
+	 * The FIFO is located out of the local host controller's physical range
+	 * but, if possible, within the posted write area. Status writes will
+	 * then be performed as unified transactions. This slightly reduces
+	 * bandwidth usage, and some Prolific based devices seem to require it.
+	 */
 	scsi_id->status_fifo_addr = hpsb_allocate_and_register_addrspace(
 			&sbp2_highlevel, ud->ne->host, &sbp2_ops,
 			sizeof(struct sbp2_status_block), sizeof(quadlet_t),
-			~0ULL, ~0ULL);
-	if (!scsi_id->status_fifo_addr) {
+			0x010000000000ULL, CSR1212_ALL_SPACE_END);
+	if (scsi_id->status_fifo_addr == ~0ULL) {
 		SBP2_ERR("failed to allocate status FIFO address range");
 		goto failed_alloc;
 	}
@@ -1450,7 +1525,8 @@ static void sbp2_parse_unit_directory(struct scsi_id_instance_data *scsi_id,
 	struct csr1212_dentry *dentry;
 	u64 management_agent_addr;
 	u32 command_set_spec_id, command_set, unit_characteristics,
-	    firmware_revision, workarounds;
+	    firmware_revision;
+	unsigned workarounds;
 	int i;
 
 	SBP2_DEBUG_ENTER();
@@ -1506,12 +1582,8 @@ static void sbp2_parse_unit_directory(struct scsi_id_instance_data *scsi_id,
 		case SBP2_FIRMWARE_REVISION_KEY:
 			/* Firmware revision */
 			firmware_revision = kv->value.immediate;
-			if (force_inquiry_hack)
-				SBP2_INFO("sbp2_firmware_revision = %x",
-					  (unsigned int)firmware_revision);
-			else
-				SBP2_DEBUG("sbp2_firmware_revision = %x",
-					   (unsigned int)firmware_revision);
+			SBP2_DEBUG("sbp2_firmware_revision = %x",
+				   (unsigned int)firmware_revision);
 			break;
 
 		default:
@@ -1519,41 +1591,44 @@ static void sbp2_parse_unit_directory(struct scsi_id_instance_data *scsi_id,
 		}
 	}
 
-	/* This is the start of our broken device checking. We try to hack
-	 * around oddities and known defects.  */
-	workarounds = 0x0;
+	workarounds = sbp2_default_workarounds;
+	if (force_inquiry_hack) {
+		SBP2_WARN("force_inquiry_hack is deprecated. "
+			  "Use parameter 'workarounds' instead.");
+		workarounds |= SBP2_WORKAROUND_INQUIRY_36;
+	}
 
-	/* If the vendor id is 0xa0b8 (Symbios vendor id), then we have a
-	 * bridge with 128KB max transfer size limitation. For sanity, we
-	 * only voice this when the current max_sectors setting
-	 * exceeds the 128k limit. By default, that is not the case.
-	 *
-	 * It would be really nice if we could detect this before the scsi
-	 * host gets initialized. That way we can down-force the
-	 * max_sectors to account for it. That is not currently
-	 * possible.  */
-	if ((firmware_revision & 0xffff00) ==
-			SBP2_128KB_BROKEN_FIRMWARE &&
-			(max_sectors * 512) > (128*1024)) {
-		SBP2_WARN("Node " NODE_BUS_FMT ": Bridge only supports 128KB max transfer size.",
-				NODE_BUS_ARGS(ud->ne->host, ud->ne->nodeid));
-		SBP2_WARN("WARNING: Current max_sectors setting is larger than 128KB (%d sectors)!",
-				max_sectors);
-		workarounds |= SBP2_BREAKAGE_128K_MAX_TRANSFER;
-	}
-
-	/* Check for a blacklisted set of devices that require us to force
-	 * a 36 byte host inquiry. This can be overriden as a module param
-	 * (to force all hosts).  */
-	for (i = 0; i < ARRAY_SIZE(sbp2_broken_inquiry_list); i++) {
-		if ((firmware_revision & 0xffff00) ==
-				sbp2_broken_inquiry_list[i]) {
-			SBP2_WARN("Node " NODE_BUS_FMT ": Using 36byte inquiry workaround",
-					NODE_BUS_ARGS(ud->ne->host, ud->ne->nodeid));
-			workarounds |= SBP2_BREAKAGE_INQUIRY_HACK;
-			break; /* No need to continue. */
+	if (!(workarounds & SBP2_WORKAROUND_OVERRIDE))
+		for (i = 0; i < ARRAY_SIZE(sbp2_workarounds_table); i++) {
+			if (sbp2_workarounds_table[i].firmware_revision &&
+			    sbp2_workarounds_table[i].firmware_revision !=
+			    (firmware_revision & 0xffff00))
+				continue;
+			if (sbp2_workarounds_table[i].model_id &&
+			    sbp2_workarounds_table[i].model_id != ud->model_id)
+				continue;
+			workarounds |= sbp2_workarounds_table[i].workarounds;
+			break;
 		}
-	}
+
+	if (workarounds)
+		SBP2_INFO("Workarounds for node " NODE_BUS_FMT ": 0x%x "
+			  "(firmware_revision 0x%06x, vendor_id 0x%06x,"
+			  " model_id 0x%06x)",
+			  NODE_BUS_ARGS(ud->ne->host, ud->ne->nodeid),
+			  workarounds, firmware_revision,
+			  ud->vendor_id ? ud->vendor_id : ud->ne->vendor_id,
+			  ud->model_id);
+
+	/* We would need one SCSI host template for each target to adjust
+	 * max_sectors on the fly, therefore warn only. */
+	if (workarounds & SBP2_WORKAROUND_128K_MAX_TRANS &&
+	    (max_sectors * 512) > (128 * 1024))
+		SBP2_WARN("Node " NODE_BUS_FMT ": Bridge only supports 128KB "
+			  "max transfer size. WARNING: Current max_sectors "
+			  "setting is larger than 128KB (%d sectors)",
+			  NODE_BUS_ARGS(ud->ne->host, ud->ne->nodeid),
+			  max_sectors);
 
 	/* If this is a logical unit directory entry, process the parent
 	 * to get the values. */
@@ -2447,19 +2522,25 @@ static int sbp2scsi_slave_alloc(struct scsi_device *sdev)
 
 	scsi_id->sdev = sdev;
 
-	if (force_inquiry_hack ||
-	    scsi_id->workarounds & SBP2_BREAKAGE_INQUIRY_HACK) {
+	if (scsi_id->workarounds & SBP2_WORKAROUND_INQUIRY_36)
 		sdev->inquiry_len = 36;
-		sdev->skip_ms_page_8 = 1;
-	}
 	return 0;
 }
 
 static int sbp2scsi_slave_configure(struct scsi_device *sdev)
 {
+	struct scsi_id_instance_data *scsi_id =
+		(struct scsi_id_instance_data *)sdev->host->hostdata[0];
+
 	blk_queue_dma_alignment(sdev->request_queue, (512 - 1));
 	sdev->use_10_for_rw = 1;
 	sdev->use_10_for_ms = 1;
+
+	if (sdev->type == TYPE_DISK &&
+	    scsi_id->workarounds & SBP2_WORKAROUND_MODE_SENSE_8)
+		sdev->skip_ms_page_8 = 1;
+	if (scsi_id->workarounds & SBP2_WORKAROUND_FIX_CAPACITY)
+		sdev->fix_capacity = 1;
 	return 0;
 }
 
@@ -2603,7 +2684,9 @@ static int sbp2_module_init(void)
 		scsi_driver_template.cmd_per_lun = 1;
 	}
 
-	/* Set max sectors (module load option). Default is 255 sectors. */
+	if (sbp2_default_workarounds & SBP2_WORKAROUND_128K_MAX_TRANS &&
+	    (max_sectors * 512) > (128 * 1024))
+		max_sectors = 128 * 1024 / 512;
 	scsi_driver_template.max_sectors = max_sectors;
 
 	/* Register our high level driver with 1394 stack */
diff --git a/drivers/ieee1394/sbp2.h b/drivers/ieee1394/sbp2.h
index e2d357a9ea3a..f4ccc9d0fba4 100644
--- a/drivers/ieee1394/sbp2.h
+++ b/drivers/ieee1394/sbp2.h
@@ -227,11 +227,6 @@ struct sbp2_status_block {
 #define SBP2_SW_VERSION_ENTRY					0x00010483
 
 /*
- * Other misc defines
- */
-#define SBP2_128KB_BROKEN_FIRMWARE				0xa0b800
-
-/*
  * SCSI specific stuff
  */
 
@@ -239,6 +234,13 @@ struct sbp2_status_block {
 #define SBP2_MAX_SECTORS		255	/* Max sectors supported */
 #define SBP2_MAX_CMDS			8	/* This should be safe */
 
+/* Flags for detected oddities and brokeness */
+#define SBP2_WORKAROUND_128K_MAX_TRANS	0x1
+#define SBP2_WORKAROUND_INQUIRY_36	0x2
+#define SBP2_WORKAROUND_MODE_SENSE_8	0x4
+#define SBP2_WORKAROUND_FIX_CAPACITY	0x8
+#define SBP2_WORKAROUND_OVERRIDE	0x100
+
 /* This is the two dma types we use for cmd_dma below */
 enum cmd_dma_types {
 	CMD_DMA_NONE,
@@ -268,10 +270,6 @@ struct sbp2_command_info {
 
 };
 
-/* A list of flags for detected oddities and brokeness. */
-#define SBP2_BREAKAGE_128K_MAX_TRANSFER		0x1
-#define SBP2_BREAKAGE_INQUIRY_HACK		0x2
-
 struct sbp2scsi_host_info;
 
 /*
@@ -345,7 +343,7 @@ struct scsi_id_instance_data {
 	struct Scsi_Host *scsi_host;
 
 	/* Device specific workarounds/brokeness */
-	u32 workarounds;
+	unsigned workarounds;
 };
 
 /* Sbp2 host data structure (one per IEEE1394 host) */
diff --git a/drivers/infiniband/core/cm.c b/drivers/infiniband/core/cm.c
index 7cfedb8d9bcd..86fee43502cd 100644
--- a/drivers/infiniband/core/cm.c
+++ b/drivers/infiniband/core/cm.c
@@ -34,6 +34,8 @@
  *
  * $Id: cm.c 2821 2005-07-08 17:07:28Z sean.hefty $
  */
+
+#include <linux/completion.h>
 #include <linux/dma-mapping.h>
 #include <linux/err.h>
 #include <linux/idr.h>
@@ -122,7 +124,7 @@ struct cm_id_private {
 	struct rb_node service_node;
 	struct rb_node sidr_id_node;
 	spinlock_t lock;	/* Do not acquire inside cm.lock */
-	wait_queue_head_t wait;
+	struct completion comp;
 	atomic_t refcount;
 
 	struct ib_mad_send_buf *msg;
@@ -159,7 +161,7 @@ static void cm_work_handler(void *data);
 static inline void cm_deref_id(struct cm_id_private *cm_id_priv)
 {
 	if (atomic_dec_and_test(&cm_id_priv->refcount))
-		wake_up(&cm_id_priv->wait);
+		complete(&cm_id_priv->comp);
 }
 
 static int cm_alloc_msg(struct cm_id_private *cm_id_priv,
@@ -559,7 +561,7 @@ struct ib_cm_id *ib_create_cm_id(struct ib_device *device,
 		goto error;
 
 	spin_lock_init(&cm_id_priv->lock);
-	init_waitqueue_head(&cm_id_priv->wait);
+	init_completion(&cm_id_priv->comp);
 	INIT_LIST_HEAD(&cm_id_priv->work_list);
 	atomic_set(&cm_id_priv->work_count, -1);
 	atomic_set(&cm_id_priv->refcount, 1);
@@ -724,8 +726,8 @@ retest:
 	}
 
 	cm_free_id(cm_id->local_id);
-	atomic_dec(&cm_id_priv->refcount);
-	wait_event(cm_id_priv->wait, !atomic_read(&cm_id_priv->refcount));
+	cm_deref_id(cm_id_priv);
+	wait_for_completion(&cm_id_priv->comp);
 	while ((work = cm_dequeue_work(cm_id_priv)) != NULL)
 		cm_free_work(work);
 	if (cm_id_priv->private_data && cm_id_priv->private_data_len)
diff --git a/drivers/infiniband/core/mad.c b/drivers/infiniband/core/mad.c
index 3a702da83e41..5ad41a64314c 100644
--- a/drivers/infiniband/core/mad.c
+++ b/drivers/infiniband/core/mad.c
@@ -228,10 +228,7 @@ struct ib_mad_agent *ib_register_mad_agent(struct ib_device *device,
 				goto error1;
 		}
 		/* Make sure class supplied is consistent with RMPP */
-		if (ib_is_mad_class_rmpp(mad_reg_req->mgmt_class)) {
-			if (!rmpp_version)
-				goto error1;
-		} else {
+		if (!ib_is_mad_class_rmpp(mad_reg_req->mgmt_class)) {
 			if (rmpp_version)
 				goto error1;
 		}
@@ -355,7 +352,7 @@ struct ib_mad_agent *ib_register_mad_agent(struct ib_device *device,
 	INIT_WORK(&mad_agent_priv->local_work, local_completions,
 		   mad_agent_priv);
 	atomic_set(&mad_agent_priv->refcount, 1);
-	init_waitqueue_head(&mad_agent_priv->wait);
+	init_completion(&mad_agent_priv->comp);
 
 	return &mad_agent_priv->agent;
 
@@ -470,7 +467,7 @@ struct ib_mad_agent *ib_register_mad_snoop(struct ib_device *device,
 	mad_snoop_priv->agent.qp = port_priv->qp_info[qpn].qp;
 	mad_snoop_priv->agent.port_num = port_num;
 	mad_snoop_priv->mad_snoop_flags = mad_snoop_flags;
-	init_waitqueue_head(&mad_snoop_priv->wait);
+	init_completion(&mad_snoop_priv->comp);
 	mad_snoop_priv->snoop_index = register_snoop_agent(
 						&port_priv->qp_info[qpn],
 						mad_snoop_priv);
@@ -489,6 +486,18 @@ error1:
 }
 EXPORT_SYMBOL(ib_register_mad_snoop);
 
+static inline void deref_mad_agent(struct ib_mad_agent_private *mad_agent_priv)
+{
+	if (atomic_dec_and_test(&mad_agent_priv->refcount))
+		complete(&mad_agent_priv->comp);
+}
+
+static inline void deref_snoop_agent(struct ib_mad_snoop_private *mad_snoop_priv)
+{
+	if (atomic_dec_and_test(&mad_snoop_priv->refcount))
+		complete(&mad_snoop_priv->comp);
+}
+
 static void unregister_mad_agent(struct ib_mad_agent_private *mad_agent_priv)
 {
 	struct ib_mad_port_private *port_priv;
@@ -512,9 +521,8 @@ static void unregister_mad_agent(struct ib_mad_agent_private *mad_agent_priv)
 	flush_workqueue(port_priv->wq);
 	ib_cancel_rmpp_recvs(mad_agent_priv);
 
-	atomic_dec(&mad_agent_priv->refcount);
-	wait_event(mad_agent_priv->wait,
-		   !atomic_read(&mad_agent_priv->refcount));
+	deref_mad_agent(mad_agent_priv);
+	wait_for_completion(&mad_agent_priv->comp);
 
 	kfree(mad_agent_priv->reg_req);
 	ib_dereg_mr(mad_agent_priv->agent.mr);
@@ -532,9 +540,8 @@ static void unregister_mad_snoop(struct ib_mad_snoop_private *mad_snoop_priv)
 	atomic_dec(&qp_info->snoop_count);
 	spin_unlock_irqrestore(&qp_info->snoop_lock, flags);
 
-	atomic_dec(&mad_snoop_priv->refcount);
-	wait_event(mad_snoop_priv->wait,
-		   !atomic_read(&mad_snoop_priv->refcount));
+	deref_snoop_agent(mad_snoop_priv);
+	wait_for_completion(&mad_snoop_priv->comp);
 
 	kfree(mad_snoop_priv);
 }
@@ -603,8 +610,7 @@ static void snoop_send(struct ib_mad_qp_info *qp_info,
 		spin_unlock_irqrestore(&qp_info->snoop_lock, flags);
 		mad_snoop_priv->agent.snoop_handler(&mad_snoop_priv->agent,
 						    send_buf, mad_send_wc);
-		if (atomic_dec_and_test(&mad_snoop_priv->refcount))
-			wake_up(&mad_snoop_priv->wait);
+		deref_snoop_agent(mad_snoop_priv);
 		spin_lock_irqsave(&qp_info->snoop_lock, flags);
 	}
 	spin_unlock_irqrestore(&qp_info->snoop_lock, flags);
@@ -629,8 +635,7 @@ static void snoop_recv(struct ib_mad_qp_info *qp_info,
 		spin_unlock_irqrestore(&qp_info->snoop_lock, flags);
 		mad_snoop_priv->agent.recv_handler(&mad_snoop_priv->agent,
 						   mad_recv_wc);
-		if (atomic_dec_and_test(&mad_snoop_priv->refcount))
-			wake_up(&mad_snoop_priv->wait);
+		deref_snoop_agent(mad_snoop_priv);
 		spin_lock_irqsave(&qp_info->snoop_lock, flags);
 	}
 	spin_unlock_irqrestore(&qp_info->snoop_lock, flags);
@@ -971,8 +976,7 @@ void ib_free_send_mad(struct ib_mad_send_buf *send_buf)
 
 	free_send_rmpp_list(mad_send_wr);
 	kfree(send_buf->mad);
-	if (atomic_dec_and_test(&mad_agent_priv->refcount))
-		wake_up(&mad_agent_priv->wait);
+	deref_mad_agent(mad_agent_priv);
 }
 EXPORT_SYMBOL(ib_free_send_mad);
 
@@ -1760,8 +1764,7 @@ static void ib_mad_complete_recv(struct ib_mad_agent_private *mad_agent_priv,
 		mad_recv_wc = ib_process_rmpp_recv_wc(mad_agent_priv,
 						      mad_recv_wc);
 		if (!mad_recv_wc) {
-			if (atomic_dec_and_test(&mad_agent_priv->refcount))
-				wake_up(&mad_agent_priv->wait);
+			deref_mad_agent(mad_agent_priv);
 			return;
 		}
 	}
@@ -1773,8 +1776,7 @@ static void ib_mad_complete_recv(struct ib_mad_agent_private *mad_agent_priv,
 		if (!mad_send_wr) {
 			spin_unlock_irqrestore(&mad_agent_priv->lock, flags);
 			ib_free_recv_mad(mad_recv_wc);
-			if (atomic_dec_and_test(&mad_agent_priv->refcount))
-				wake_up(&mad_agent_priv->wait);
+			deref_mad_agent(mad_agent_priv);
 			return;
 		}
 		ib_mark_mad_done(mad_send_wr);
@@ -1793,8 +1795,7 @@ static void ib_mad_complete_recv(struct ib_mad_agent_private *mad_agent_priv,
 	} else {
 		mad_agent_priv->agent.recv_handler(&mad_agent_priv->agent,
 						   mad_recv_wc);
-		if (atomic_dec_and_test(&mad_agent_priv->refcount))
-			wake_up(&mad_agent_priv->wait);
+		deref_mad_agent(mad_agent_priv);
 	}
 }
 
@@ -2024,8 +2025,7 @@ void ib_mad_complete_send_wr(struct ib_mad_send_wr_private *mad_send_wr,
 						   mad_send_wc);
 
 	/* Release reference on agent taken when sending */
-	if (atomic_dec_and_test(&mad_agent_priv->refcount))
-		wake_up(&mad_agent_priv->wait);
+	deref_mad_agent(mad_agent_priv);
 	return;
 done:
 	spin_unlock_irqrestore(&mad_agent_priv->lock, flags);
diff --git a/drivers/infiniband/core/mad_priv.h b/drivers/infiniband/core/mad_priv.h
index 6c9c133d71ef..b4fa28d3160f 100644
--- a/drivers/infiniband/core/mad_priv.h
+++ b/drivers/infiniband/core/mad_priv.h
@@ -37,6 +37,7 @@
 #ifndef __IB_MAD_PRIV_H__
 #define __IB_MAD_PRIV_H__
 
+#include <linux/completion.h>
 #include <linux/pci.h>
 #include <linux/kthread.h>
 #include <linux/workqueue.h>
@@ -108,7 +109,7 @@ struct ib_mad_agent_private {
 	struct list_head rmpp_list;
 
 	atomic_t refcount;
-	wait_queue_head_t wait;
+	struct completion comp;
 };
 
 struct ib_mad_snoop_private {
@@ -117,7 +118,7 @@ struct ib_mad_snoop_private {
 	int snoop_index;
 	int mad_snoop_flags;
 	atomic_t refcount;
-	wait_queue_head_t wait;
+	struct completion comp;
 };
 
 struct ib_mad_send_wr_private {
diff --git a/drivers/infiniband/core/mad_rmpp.c b/drivers/infiniband/core/mad_rmpp.c
index dfd4e588ce03..d4704e054e30 100644
--- a/drivers/infiniband/core/mad_rmpp.c
+++ b/drivers/infiniband/core/mad_rmpp.c
@@ -49,7 +49,7 @@ struct mad_rmpp_recv {
 	struct list_head list;
 	struct work_struct timeout_work;
 	struct work_struct cleanup_work;
-	wait_queue_head_t wait;
+	struct completion comp;
 	enum rmpp_state state;
 	spinlock_t lock;
 	atomic_t refcount;
@@ -69,10 +69,16 @@ struct mad_rmpp_recv {
 	u8 method;
 };
 
+static inline void deref_rmpp_recv(struct mad_rmpp_recv *rmpp_recv)
+{
+	if (atomic_dec_and_test(&rmpp_recv->refcount))
+		complete(&rmpp_recv->comp);
+}
+
 static void destroy_rmpp_recv(struct mad_rmpp_recv *rmpp_recv)
 {
-	atomic_dec(&rmpp_recv->refcount);
-	wait_event(rmpp_recv->wait, !atomic_read(&rmpp_recv->refcount));
+	deref_rmpp_recv(rmpp_recv);
+	wait_for_completion(&rmpp_recv->comp);
 	ib_destroy_ah(rmpp_recv->ah);
 	kfree(rmpp_recv);
 }
@@ -253,7 +259,7 @@ create_rmpp_recv(struct ib_mad_agent_private *agent,
 		goto error;
 
 	rmpp_recv->agent = agent;
-	init_waitqueue_head(&rmpp_recv->wait);
+	init_completion(&rmpp_recv->comp);
 	INIT_WORK(&rmpp_recv->timeout_work, recv_timeout_handler, rmpp_recv);
 	INIT_WORK(&rmpp_recv->cleanup_work, recv_cleanup_handler, rmpp_recv);
 	spin_lock_init(&rmpp_recv->lock);
@@ -279,12 +285,6 @@ error:	kfree(rmpp_recv);
 	return NULL;
 }
 
-static inline void deref_rmpp_recv(struct mad_rmpp_recv *rmpp_recv)
-{
-	if (atomic_dec_and_test(&rmpp_recv->refcount))
-		wake_up(&rmpp_recv->wait);
-}
-
 static struct mad_rmpp_recv *
 find_rmpp_recv(struct ib_mad_agent_private *agent,
 	       struct ib_mad_recv_wc *mad_recv_wc)
diff --git a/drivers/infiniband/core/sysfs.c b/drivers/infiniband/core/sysfs.c
index 15121cb5a1f6..21f9282c1b25 100644
--- a/drivers/infiniband/core/sysfs.c
+++ b/drivers/infiniband/core/sysfs.c
@@ -336,7 +336,7 @@ static ssize_t show_pma_counter(struct ib_port *p, struct port_attribute *attr,
 	switch (width) {
 	case 4:
 		ret = sprintf(buf, "%u\n", (out_mad->data[40 + offset / 8] >>
-					    (offset % 4)) & 0xf);
+					    (4 - (offset % 8))) & 0xf);
 		break;
 	case 8:
 		ret = sprintf(buf, "%u\n", out_mad->data[40 + offset / 8]);
diff --git a/drivers/infiniband/core/ucm.c b/drivers/infiniband/core/ucm.c
index f6a05965a4e8..9164a09b6ccd 100644
--- a/drivers/infiniband/core/ucm.c
+++ b/drivers/infiniband/core/ucm.c
@@ -32,6 +32,8 @@
  *
  * $Id: ucm.c 2594 2005-06-13 19:46:02Z libor $
  */
+
+#include <linux/completion.h>
 #include <linux/init.h>
 #include <linux/fs.h>
 #include <linux/module.h>
@@ -72,7 +74,7 @@ struct ib_ucm_file {
 
 struct ib_ucm_context {
 	int                 id;
-	wait_queue_head_t   wait;
+	struct completion   comp;
 	atomic_t            ref;
 	int		    events_reported;
 
@@ -138,7 +140,7 @@ static struct ib_ucm_context *ib_ucm_ctx_get(struct ib_ucm_file *file, int id)
 static void ib_ucm_ctx_put(struct ib_ucm_context *ctx)
 {
 	if (atomic_dec_and_test(&ctx->ref))
-		wake_up(&ctx->wait);
+		complete(&ctx->comp);
 }
 
 static inline int ib_ucm_new_cm_id(int event)
@@ -178,7 +180,7 @@ static struct ib_ucm_context *ib_ucm_ctx_alloc(struct ib_ucm_file *file)
 		return NULL;
 
 	atomic_set(&ctx->ref, 1);
-	init_waitqueue_head(&ctx->wait);
+	init_completion(&ctx->comp);
 	ctx->file = file;
 	INIT_LIST_HEAD(&ctx->events);
 
@@ -586,8 +588,8 @@ static ssize_t ib_ucm_destroy_id(struct ib_ucm_file *file,
 	if (IS_ERR(ctx))
 		return PTR_ERR(ctx);
 
-	atomic_dec(&ctx->ref);
-	wait_event(ctx->wait, !atomic_read(&ctx->ref));
+	ib_ucm_ctx_put(ctx);
+	wait_for_completion(&ctx->comp);
 
 	/* No new events will be generated after destroying the cm_id. */
 	ib_destroy_cm_id(ctx->cm_id);
diff --git a/drivers/infiniband/core/uverbs_mem.c b/drivers/infiniband/core/uverbs_mem.c
index 36a32c315668..efe147dbeb42 100644
--- a/drivers/infiniband/core/uverbs_mem.c
+++ b/drivers/infiniband/core/uverbs_mem.c
@@ -211,8 +211,10 @@ void ib_umem_release_on_close(struct ib_device *dev, struct ib_umem *umem)
 	 */
 
 	work = kmalloc(sizeof *work, GFP_KERNEL);
-	if (!work)
+	if (!work) {
+		mmput(mm);
 		return;
+	}
 
 	INIT_WORK(&work->work, ib_umem_account, work);
 	work->mm   = mm;
diff --git a/drivers/infiniband/hw/ipath/ipath_debug.h b/drivers/infiniband/hw/ipath/ipath_debug.h
index 593e28969c69..46762387f5f8 100644
--- a/drivers/infiniband/hw/ipath/ipath_debug.h
+++ b/drivers/infiniband/hw/ipath/ipath_debug.h
@@ -60,11 +60,11 @@
 #define __IPATH_KERNEL_SEND 0x2000	/* use kernel mode send */
 #define __IPATH_EPKTDBG     0x4000	/* print ethernet packet data */
 #define __IPATH_SMADBG      0x8000	/* sma packet debug */
-#define __IPATH_IPATHDBG    0x10000	/* Ethernet (IPATH) general debug on */
-#define __IPATH_IPATHWARN   0x20000	/* Ethernet (IPATH) warnings on */
-#define __IPATH_IPATHERR    0x40000	/* Ethernet (IPATH) errors on */
-#define __IPATH_IPATHPD     0x80000	/* Ethernet (IPATH) packet dump on */
-#define __IPATH_IPATHTABLE  0x100000	/* Ethernet (IPATH) table dump on */
+#define __IPATH_IPATHDBG    0x10000	/* Ethernet (IPATH) gen debug */
+#define __IPATH_IPATHWARN   0x20000	/* Ethernet (IPATH) warnings */
+#define __IPATH_IPATHERR    0x40000	/* Ethernet (IPATH) errors */
+#define __IPATH_IPATHPD     0x80000	/* Ethernet (IPATH) packet dump */
+#define __IPATH_IPATHTABLE  0x100000	/* Ethernet (IPATH) table dump */
 
 #else				/* _IPATH_DEBUGGING */
 
@@ -79,11 +79,12 @@
 #define __IPATH_TRSAMPLE  0x0	/* generate trace buffer sample entries */
 #define __IPATH_VERBDBG   0x0	/* very verbose debug */
 #define __IPATH_PKTDBG    0x0	/* print packet data */
-#define __IPATH_PROCDBG   0x0	/* print process startup (init)/exit messages */
+#define __IPATH_PROCDBG   0x0	/* process startup (init)/exit messages */
 /* print mmap/nopage stuff, not using VDBG any more */
 #define __IPATH_MMDBG     0x0
 #define __IPATH_EPKTDBG   0x0	/* print ethernet packet data */
-#define __IPATH_SMADBG    0x0   /* print process startup (init)/exit messages */#define __IPATH_IPATHDBG  0x0	/* Ethernet (IPATH) table dump on */
+#define __IPATH_SMADBG    0x0   /* process startup (init)/exit messages */
+#define __IPATH_IPATHDBG  0x0	/* Ethernet (IPATH) table dump on */
 #define __IPATH_IPATHWARN 0x0	/* Ethernet (IPATH) warnings on   */
 #define __IPATH_IPATHERR  0x0	/* Ethernet (IPATH) errors on   */
 #define __IPATH_IPATHPD   0x0	/* Ethernet (IPATH) packet dump on   */
diff --git a/drivers/infiniband/hw/ipath/ipath_diag.c b/drivers/infiniband/hw/ipath/ipath_diag.c
index cd533cf951c2..28ddceb260e8 100644
--- a/drivers/infiniband/hw/ipath/ipath_diag.c
+++ b/drivers/infiniband/hw/ipath/ipath_diag.c
@@ -277,13 +277,14 @@ static int ipath_diag_open(struct inode *in, struct file *fp)
 
 bail:
 	spin_unlock_irqrestore(&ipath_devs_lock, flags);
-	mutex_unlock(&ipath_mutex);
 
 	/* Only expose a way to reset the device if we
 	   make it into diag mode. */
 	if (ret == 0)
 		ipath_expose_reset(&dd->pcidev->dev);
 
+	mutex_unlock(&ipath_mutex);
+
 	return ret;
 }
 
@@ -365,15 +366,3 @@ static ssize_t ipath_diag_write(struct file *fp, const char __user *data,
 bail:
 	return ret;
 }
-
-void ipath_diag_bringup_link(struct ipath_devdata *dd)
-{
-	if (diag_set_link || (dd->ipath_flags & IPATH_LINKACTIVE))
-		return;
-
-	diag_set_link = 1;
-	ipath_cdbg(VERBOSE, "Trying to set to set link active for "
-		   "diag pkt\n");
-	ipath_layer_set_linkstate(dd, IPATH_IB_LINKARM);
-	ipath_layer_set_linkstate(dd, IPATH_IB_LINKACTIVE);
-}
diff --git a/drivers/infiniband/hw/ipath/ipath_driver.c b/drivers/infiniband/hw/ipath/ipath_driver.c
index 58a94efb0070..dddcdae736ac 100644
--- a/drivers/infiniband/hw/ipath/ipath_driver.c
+++ b/drivers/infiniband/hw/ipath/ipath_driver.c
@@ -116,10 +116,9 @@ static int __devinit ipath_init_one(struct pci_dev *,
 #define PCI_DEVICE_ID_INFINIPATH_PE800 0x10
 
 static const struct pci_device_id ipath_pci_tbl[] = {
-	{PCI_DEVICE(PCI_VENDOR_ID_PATHSCALE,
-		    PCI_DEVICE_ID_INFINIPATH_HT)},
-	{PCI_DEVICE(PCI_VENDOR_ID_PATHSCALE,
-		    PCI_DEVICE_ID_INFINIPATH_PE800)},
+	{ PCI_DEVICE(PCI_VENDOR_ID_PATHSCALE, PCI_DEVICE_ID_INFINIPATH_HT) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_PATHSCALE, PCI_DEVICE_ID_INFINIPATH_PE800) },
+	{ 0, }
 };
 
 MODULE_DEVICE_TABLE(pci, ipath_pci_tbl);
@@ -418,9 +417,19 @@ static int __devinit ipath_init_one(struct pci_dev *pdev,
 
 	ret = pci_set_dma_mask(pdev, DMA_64BIT_MASK);
 	if (ret) {
-		dev_info(&pdev->dev, "pci_set_dma_mask unit %u "
-			 "fails: %d\n", dd->ipath_unit, ret);
-		goto bail_regions;
+		/*
+		 * if the 64 bit setup fails, try 32 bit.  Some systems
+		 * do not setup 64 bit maps on systems with 2GB or less
+		 * memory installed.
+		 */
+		ret = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
+		if (ret) {
+			dev_info(&pdev->dev, "pci_set_dma_mask unit %u "
+				 "fails: %d\n", dd->ipath_unit, ret);
+			goto bail_regions;
+		}
+		else
+			ipath_dbg("No 64bit DMA mask, used 32 bit mask\n");
 	}
 
 	pci_set_master(pdev);
@@ -1729,7 +1738,7 @@ void ipath_free_pddata(struct ipath_devdata *dd, u32 port, int freehdrq)
 	}
 }
 
-int __init infinipath_init(void)
+static int __init infinipath_init(void)
 {
 	int ret;
 
@@ -1896,19 +1905,19 @@ static void __exit infinipath_cleanup(void)
 			} else
 				ipath_dbg("irq is 0, not doing free_irq "
 					  "for unit %u\n", dd->ipath_unit);
-			dd->pcidev = NULL;
-		}
 
-		/*
-		 * we check for NULL here, because it's outside the kregbase
-		 * check, and we need to call it after the free_irq.  Thus
-		 * it's possible that the function pointers were never
-		 * initialized.
-		 */
-		if (dd->ipath_f_cleanup)
-			/* clean up chip-specific stuff */
-			dd->ipath_f_cleanup(dd);
+			/*
+			 * we check for NULL here, because it's outside
+			 * the kregbase check, and we need to call it
+			 * after the free_irq.  Thus it's possible that
+			 * the function pointers were never initialized.
+			 */
+			if (dd->ipath_f_cleanup)
+				/* clean up chip-specific stuff */
+				dd->ipath_f_cleanup(dd);
 
+			dd->pcidev = NULL;
+		}
 		spin_lock_irqsave(&ipath_devs_lock, flags);
 	}
 
@@ -1949,7 +1958,7 @@ int ipath_reset_device(int unit)
 	}
 
 	if (dd->ipath_pd)
-		for (i = 1; i < dd->ipath_portcnt; i++) {
+		for (i = 1; i < dd->ipath_cfgports; i++) {
 			if (dd->ipath_pd[i] && dd->ipath_pd[i]->port_cnt) {
 				ipath_dbg("unit %u port %d is in use "
 					  "(PID %u cmd %s), can't reset\n",
diff --git a/drivers/infiniband/hw/ipath/ipath_eeprom.c b/drivers/infiniband/hw/ipath/ipath_eeprom.c
index f11a900e8cd7..a2f1ceafcca9 100644
--- a/drivers/infiniband/hw/ipath/ipath_eeprom.c
+++ b/drivers/infiniband/hw/ipath/ipath_eeprom.c
@@ -505,11 +505,10 @@ static u8 flash_csum(struct ipath_flash *ifp, int adjust)
  * ipath_get_guid - get the GUID from the i2c device
  * @dd: the infinipath device
  *
- * When we add the multi-chip support, we will probably have to add
- * the ability to use the number of guids field, and get the guid from
- * the first chip's flash, to use for all of them.
+ * We have the capability to use the ipath_nguid field, and get
+ * the guid from the first chip's flash, to use for all of them.
  */
-void ipath_get_guid(struct ipath_devdata *dd)
+void ipath_get_eeprom_info(struct ipath_devdata *dd)
 {
 	void *buf;
 	struct ipath_flash *ifp;
diff --git a/drivers/infiniband/hw/ipath/ipath_file_ops.c b/drivers/infiniband/hw/ipath/ipath_file_ops.c
index c347191f02bf..ada267e41f6c 100644
--- a/drivers/infiniband/hw/ipath/ipath_file_ops.c
+++ b/drivers/infiniband/hw/ipath/ipath_file_ops.c
@@ -139,7 +139,7 @@ static int ipath_get_base_info(struct ipath_portdata *pd,
 	kinfo->spi_piosize = dd->ipath_ibmaxlen;
 	kinfo->spi_mtu = dd->ipath_ibmaxlen;	/* maxlen, not ibmtu */
 	kinfo->spi_port = pd->port_port;
-	kinfo->spi_sw_version = IPATH_USER_SWVERSION;
+	kinfo->spi_sw_version = IPATH_KERN_SWVERSION;
 	kinfo->spi_hw_version = dd->ipath_revision;
 
 	if (copy_to_user(ubase, kinfo, sizeof(*kinfo)))
@@ -1224,6 +1224,10 @@ static unsigned int ipath_poll(struct file *fp,
 
 	if (tail == head) {
 		set_bit(IPATH_PORT_WAITING_RCV, &pd->port_flag);
+		if(dd->ipath_rhdrhead_intr_off) /* arm rcv interrupt */
+			(void)ipath_write_ureg(dd, ur_rcvhdrhead,
+					       dd->ipath_rhdrhead_intr_off
+					       | head, pd->port_port);
 		poll_wait(fp, &pd->port_wait, pt);
 
 		if (test_bit(IPATH_PORT_WAITING_RCV, &pd->port_flag)) {
diff --git a/drivers/infiniband/hw/ipath/ipath_ht400.c b/drivers/infiniband/hw/ipath/ipath_ht400.c
index 4652435998f3..fac0a2b74de2 100644
--- a/drivers/infiniband/hw/ipath/ipath_ht400.c
+++ b/drivers/infiniband/hw/ipath/ipath_ht400.c
@@ -607,7 +607,12 @@ static int ipath_ht_boardname(struct ipath_devdata *dd, char *name,
 	case 4:		/* Ponderosa is one of the bringup boards */
 		n = "Ponderosa";
 		break;
-	case 5:		/* HT-460 original production board */
+	case 5:
+		/*
+		 * HT-460 original production board; two production levels, with
+		 * different serial number ranges.   See ipath_ht_early_init() for
+		 * case where we enable IPATH_GPIO_INTR for later serial # range.
+		 */
 		n = "InfiniPath_HT-460";
 		break;
 	case 6:
@@ -642,7 +647,7 @@ static int ipath_ht_boardname(struct ipath_devdata *dd, char *name,
 	if (n)
 		snprintf(name, namelen, "%s", n);
 
-	if (dd->ipath_majrev != 3 || dd->ipath_minrev != 2) {
+	if (dd->ipath_majrev != 3 || (dd->ipath_minrev < 2 || dd->ipath_minrev > 3)) {
 		/*
 		 * This version of the driver only supports the HT-400
 		 * Rev 3.2
@@ -1520,6 +1525,18 @@ static int ipath_ht_early_init(struct ipath_devdata *dd)
 	 */
 	ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl,
 			 INFINIPATH_S_ABORT);
+
+	ipath_get_eeprom_info(dd);
+	if(dd->ipath_boardrev == 5 && dd->ipath_serial[0] == '1' &&
+		dd->ipath_serial[1] == '2' && dd->ipath_serial[2] == '8') {
+		/*
+		 * Later production HT-460 has same changes as HT-465, so
+		 * can use GPIO interrupts.  They have serial #'s starting
+		 * with 128, rather than 112.
+		 */
+		dd->ipath_flags |= IPATH_GPIO_INTR;
+		dd->ipath_flags &= ~IPATH_POLL_RX_INTR;
+	}
 	return 0;
 }
 
diff --git a/drivers/infiniband/hw/ipath/ipath_init_chip.c b/drivers/infiniband/hw/ipath/ipath_init_chip.c
index 2823ff9c0c62..dc83250d26a6 100644
--- a/drivers/infiniband/hw/ipath/ipath_init_chip.c
+++ b/drivers/infiniband/hw/ipath/ipath_init_chip.c
@@ -53,13 +53,19 @@ MODULE_PARM_DESC(cfgports, "Set max number of ports to use");
 
 /*
  * Number of buffers reserved for driver (layered drivers and SMA
- * send).  Reserved at end of buffer list.
+ * send).  Reserved at end of buffer list.   Initialized based on
+ * number of PIO buffers if not set via module interface.
+ * The problem with this is that it's global, but we'll use different
+ * numbers for different chip types.  So the default value is not
+ * very useful.  I've redefined it for the 1.3 release so that it's
+ * zero unless set by the user to something else, in which case we
+ * try to respect it.
  */
-static ushort ipath_kpiobufs = 32;
+static ushort ipath_kpiobufs;
 
 static int ipath_set_kpiobufs(const char *val, struct kernel_param *kp);
 
-module_param_call(kpiobufs, ipath_set_kpiobufs, param_get_uint,
+module_param_call(kpiobufs, ipath_set_kpiobufs, param_get_ushort,
 		  &ipath_kpiobufs, S_IWUSR | S_IRUGO);
 MODULE_PARM_DESC(kpiobufs, "Set number of PIO buffers for driver");
 
@@ -531,8 +537,11 @@ static int init_housekeeping(struct ipath_devdata *dd,
 	 * Don't clear ipath_flags as 8bit mode was set before
 	 * entering this func. However, we do set the linkstate to
 	 * unknown, so we can watch for a transition.
+	 * PRESENT is set because we want register reads to work,
+	 * and the kernel infrastructure saw it in config space;
+	 * We clear it if we have failures.
 	 */
-	dd->ipath_flags |= IPATH_LINKUNK;
+	dd->ipath_flags |= IPATH_LINKUNK | IPATH_PRESENT;
 	dd->ipath_flags &= ~(IPATH_LINKACTIVE | IPATH_LINKARMED |
 			     IPATH_LINKDOWN | IPATH_LINKINIT);
 
@@ -560,6 +569,7 @@ static int init_housekeeping(struct ipath_devdata *dd,
 	    || (dd->ipath_uregbase & 0xffffffff) == 0xffffffff) {
 		ipath_dev_err(dd, "Register read failures from chip, "
 			      "giving up initialization\n");
+		dd->ipath_flags &= ~IPATH_PRESENT;
 		ret = -ENODEV;
 		goto done;
 	}
@@ -682,16 +692,14 @@ int ipath_init_chip(struct ipath_devdata *dd, int reinit)
 	 */
 	dd->ipath_pioavregs = ALIGN(val, sizeof(u64) * BITS_PER_BYTE / 2)
 		/ (sizeof(u64) * BITS_PER_BYTE / 2);
-	if (!ipath_kpiobufs)	/* have to have at least 1, for SMA */
-		kpiobufs = ipath_kpiobufs = 1;
-	else if ((dd->ipath_piobcnt2k + dd->ipath_piobcnt4k) <
-		 (dd->ipath_cfgports * IPATH_MIN_USER_PORT_BUFCNT)) {
-		dev_info(&dd->pcidev->dev, "Too few PIO buffers (%u) "
-			 "for %u ports to have %u each!\n",
-			 dd->ipath_piobcnt2k + dd->ipath_piobcnt4k,
-			 dd->ipath_cfgports, IPATH_MIN_USER_PORT_BUFCNT);
-		kpiobufs = 1;	/* reserve just the minimum for SMA/ether */
-	} else
+	if (ipath_kpiobufs == 0) {
+		/* not set by user, or set explictly to default  */
+		if ((dd->ipath_piobcnt2k + dd->ipath_piobcnt4k) > 128)
+			kpiobufs = 32;
+		else
+			kpiobufs = 16;
+	}
+	else
 		kpiobufs = ipath_kpiobufs;
 
 	if (kpiobufs >
@@ -871,7 +879,6 @@ int ipath_init_chip(struct ipath_devdata *dd, int reinit)
 
 done:
 	if (!ret) {
-		ipath_get_guid(dd);
 		*dd->ipath_statusp |= IPATH_STATUS_CHIP_PRESENT;
 		if (!dd->ipath_f_intrsetup(dd)) {
 			/* now we can enable all interrupts from the chip */
diff --git a/drivers/infiniband/hw/ipath/ipath_intr.c b/drivers/infiniband/hw/ipath/ipath_intr.c
index 60f5f4108069..3e72a1fe3d73 100644
--- a/drivers/infiniband/hw/ipath/ipath_intr.c
+++ b/drivers/infiniband/hw/ipath/ipath_intr.c
@@ -172,8 +172,8 @@ static void handle_e_ibstatuschanged(struct ipath_devdata *dd,
 				   "was %s\n", dd->ipath_unit,
 				   ib_linkstate(lstate),
 				   ib_linkstate((unsigned)
-				   		dd->ipath_lastibcstat
-				   		& IPATH_IBSTATE_MASK));
+						dd->ipath_lastibcstat
+						& IPATH_IBSTATE_MASK));
 	}
 	else {
 		lstate = dd->ipath_lastibcstat & IPATH_IBSTATE_MASK;
@@ -665,14 +665,14 @@ static void handle_layer_pioavail(struct ipath_devdata *dd)
 
 	ret = __ipath_layer_intr(dd, IPATH_LAYER_INT_SEND_CONTINUE);
 	if (ret > 0)
-		goto clear;
+		goto set;
 
 	ret = __ipath_verbs_piobufavail(dd);
 	if (ret > 0)
-		goto clear;
+		goto set;
 
 	return;
-clear:
+set:
 	set_bit(IPATH_S_PIOINTBUFAVAIL, &dd->ipath_sendctrl);
 	ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl,
 			 dd->ipath_sendctrl);
@@ -719,11 +719,24 @@ static void handle_rcv(struct ipath_devdata *dd, u32 istat)
 irqreturn_t ipath_intr(int irq, void *data, struct pt_regs *regs)
 {
 	struct ipath_devdata *dd = data;
-	u32 istat = ipath_read_kreg32(dd, dd->ipath_kregs->kr_intstatus);
+	u32 istat;
 	ipath_err_t estat = 0;
 	static unsigned unexpected = 0;
 	irqreturn_t ret;
 
+	if(!(dd->ipath_flags & IPATH_PRESENT)) {
+		/* this is mostly so we don't try to touch the chip while
+		 * it is being reset */
+		/*
+		 * This return value is perhaps odd, but we do not want the
+		 * interrupt core code to remove our interrupt handler
+		 * because we don't appear to be handling an interrupt
+		 * during a chip reset.
+		 */
+		return IRQ_HANDLED;
+	}
+
+	istat = ipath_read_kreg32(dd, dd->ipath_kregs->kr_intstatus);
 	if (unlikely(!istat)) {
 		ipath_stats.sps_nullintr++;
 		ret = IRQ_NONE; /* not our interrupt, or already handled */
diff --git a/drivers/infiniband/hw/ipath/ipath_kernel.h b/drivers/infiniband/hw/ipath/ipath_kernel.h
index 159d0aed31a5..5d92d57b6f54 100644
--- a/drivers/infiniband/hw/ipath/ipath_kernel.h
+++ b/drivers/infiniband/hw/ipath/ipath_kernel.h
@@ -528,7 +528,6 @@ extern spinlock_t ipath_devs_lock;
 extern struct ipath_devdata *ipath_lookup(int unit);
 
 extern u16 ipath_layer_rcv_opcode;
-extern int ipath_verbs_registered;
 extern int __ipath_layer_intr(struct ipath_devdata *, u32);
 extern int ipath_layer_intr(struct ipath_devdata *, u32);
 extern int __ipath_layer_rcv(struct ipath_devdata *, void *,
@@ -651,7 +650,7 @@ u32 __iomem *ipath_getpiobuf(struct ipath_devdata *, u32 *);
 void ipath_init_pe800_funcs(struct ipath_devdata *);
 /* init HT-400-specific func */
 void ipath_init_ht400_funcs(struct ipath_devdata *);
-void ipath_get_guid(struct ipath_devdata *);
+void ipath_get_eeprom_info(struct ipath_devdata *);
 u64 ipath_snap_cntr(struct ipath_devdata *, ipath_creg);
 
 /*
@@ -732,7 +731,7 @@ u64 ipath_read_kreg64_port(const struct ipath_devdata *, ipath_kreg,
 static inline u32 ipath_read_ureg32(const struct ipath_devdata *dd,
 				    ipath_ureg regno, int port)
 {
-	if (!dd->ipath_kregbase)
+	if (!dd->ipath_kregbase || !(dd->ipath_flags & IPATH_PRESENT))
 		return 0;
 
 	return readl(regno + (u64 __iomem *)
@@ -763,7 +762,7 @@ static inline void ipath_write_ureg(const struct ipath_devdata *dd,
 static inline u32 ipath_read_kreg32(const struct ipath_devdata *dd,
 				    ipath_kreg regno)
 {
-	if (!dd->ipath_kregbase)
+	if (!dd->ipath_kregbase || !(dd->ipath_flags & IPATH_PRESENT))
 		return -1;
 	return readl((u32 __iomem *) & dd->ipath_kregbase[regno]);
 }
@@ -771,7 +770,7 @@ static inline u32 ipath_read_kreg32(const struct ipath_devdata *dd,
 static inline u64 ipath_read_kreg64(const struct ipath_devdata *dd,
 				    ipath_kreg regno)
 {
-	if (!dd->ipath_kregbase)
+	if (!dd->ipath_kregbase || !(dd->ipath_flags & IPATH_PRESENT))
 		return -1;
 
 	return readq(&dd->ipath_kregbase[regno]);
@@ -787,7 +786,7 @@ static inline void ipath_write_kreg(const struct ipath_devdata *dd,
 static inline u64 ipath_read_creg(const struct ipath_devdata *dd,
 				  ipath_sreg regno)
 {
-	if (!dd->ipath_kregbase)
+	if (!dd->ipath_kregbase || !(dd->ipath_flags & IPATH_PRESENT))
 		return 0;
 
 	return readq(regno + (u64 __iomem *)
@@ -798,7 +797,7 @@ static inline u64 ipath_read_creg(const struct ipath_devdata *dd,
 static inline u32 ipath_read_creg32(const struct ipath_devdata *dd,
 					 ipath_sreg regno)
 {
-	if (!dd->ipath_kregbase)
+	if (!dd->ipath_kregbase || !(dd->ipath_flags & IPATH_PRESENT))
 		return 0;
 	return readl(regno + (u64 __iomem *)
 		     (dd->ipath_cregbase +
diff --git a/drivers/infiniband/hw/ipath/ipath_keys.c b/drivers/infiniband/hw/ipath/ipath_keys.c
index aa33b0e9f2f6..5ae8761f9dd2 100644
--- a/drivers/infiniband/hw/ipath/ipath_keys.c
+++ b/drivers/infiniband/hw/ipath/ipath_keys.c
@@ -136,9 +136,7 @@ int ipath_lkey_ok(struct ipath_lkey_table *rkt, struct ipath_sge *isge,
 		ret = 1;
 		goto bail;
 	}
-	spin_lock(&rkt->lock);
 	mr = rkt->table[(sge->lkey >> (32 - ib_ipath_lkey_table_size))];
-	spin_unlock(&rkt->lock);
 	if (unlikely(mr == NULL || mr->lkey != sge->lkey)) {
 		ret = 0;
 		goto bail;
@@ -184,8 +182,6 @@ bail:
  * @acc: access flags
  *
  * Return 1 if successful, otherwise 0.
- *
- * The QP r_rq.lock should be held.
  */
 int ipath_rkey_ok(struct ipath_ibdev *dev, struct ipath_sge_state *ss,
 		  u32 len, u64 vaddr, u32 rkey, int acc)
@@ -196,9 +192,7 @@ int ipath_rkey_ok(struct ipath_ibdev *dev, struct ipath_sge_state *ss,
 	size_t off;
 	int ret;
 
-	spin_lock(&rkt->lock);
 	mr = rkt->table[(rkey >> (32 - ib_ipath_lkey_table_size))];
-	spin_unlock(&rkt->lock);
 	if (unlikely(mr == NULL || mr->lkey != rkey)) {
 		ret = 0;
 		goto bail;
diff --git a/drivers/infiniband/hw/ipath/ipath_layer.c b/drivers/infiniband/hw/ipath/ipath_layer.c
index 2cabf6340572..9ec4ac77b87f 100644
--- a/drivers/infiniband/hw/ipath/ipath_layer.c
+++ b/drivers/infiniband/hw/ipath/ipath_layer.c
@@ -46,13 +46,15 @@
 /* Acquire before ipath_devs_lock. */
 static DEFINE_MUTEX(ipath_layer_mutex);
 
+static int ipath_verbs_registered;
+
 u16 ipath_layer_rcv_opcode;
+
 static int (*layer_intr)(void *, u32);
 static int (*layer_rcv)(void *, void *, struct sk_buff *);
 static int (*layer_rcv_lid)(void *, void *);
 static int (*verbs_piobufavail)(void *);
 static void (*verbs_rcv)(void *, void *, void *, u32);
-int ipath_verbs_registered;
 
 static void *(*layer_add_one)(int, struct ipath_devdata *);
 static void (*layer_remove_one)(void *);
@@ -586,6 +588,8 @@ void ipath_verbs_unregister(void)
 	verbs_rcv = NULL;
 	verbs_timer_cb = NULL;
 
+	ipath_verbs_registered = 0;
+
 	mutex_unlock(&ipath_layer_mutex);
 }
 
@@ -868,12 +872,13 @@ static void copy_io(u32 __iomem *piobuf, struct ipath_sge_state *ss,
 		update_sge(ss, len);
 		length -= len;
 	}
+	/* Update address before sending packet. */
+	update_sge(ss, length);
 	/* must flush early everything before trigger word */
 	ipath_flush_wc();
 	__raw_writel(last, piobuf);
 	/* be sure trigger word is written */
 	ipath_flush_wc();
-	update_sge(ss, length);
 }
 
 /**
@@ -939,17 +944,18 @@ int ipath_verbs_send(struct ipath_devdata *dd, u32 hdrwords,
 	if (likely(ss->num_sge == 1 && len <= ss->sge.length &&
 		   !((unsigned long)ss->sge.vaddr & (sizeof(u32) - 1)))) {
 		u32 w;
+		u32 *addr = (u32 *) ss->sge.vaddr;
 
+		/* Update address before sending packet. */
+		update_sge(ss, len);
 		/* Need to round up for the last dword in the packet. */
 		w = (len + 3) >> 2;
-		__iowrite32_copy(piobuf, ss->sge.vaddr, w - 1);
+		__iowrite32_copy(piobuf, addr, w - 1);
 		/* must flush early everything before trigger word */
 		ipath_flush_wc();
-		__raw_writel(((u32 *) ss->sge.vaddr)[w - 1],
-			     piobuf + w - 1);
+		__raw_writel(addr[w - 1], piobuf + w - 1);
 		/* be sure trigger word is written */
 		ipath_flush_wc();
-		update_sge(ss, len);
 		ret = 0;
 		goto bail;
 	}
diff --git a/drivers/infiniband/hw/ipath/ipath_pe800.c b/drivers/infiniband/hw/ipath/ipath_pe800.c
index e693a7a82667..02e8c75b24f6 100644
--- a/drivers/infiniband/hw/ipath/ipath_pe800.c
+++ b/drivers/infiniband/hw/ipath/ipath_pe800.c
@@ -305,8 +305,8 @@ static const struct ipath_cregs ipath_pe_cregs = {
  * we'll print them and continue.  We reuse the same message buffer as
  * ipath_handle_errors() to avoid excessive stack usage.
  */
-void ipath_pe_handle_hwerrors(struct ipath_devdata *dd, char *msg,
-	size_t msgl)
+static void ipath_pe_handle_hwerrors(struct ipath_devdata *dd, char *msg,
+				     size_t msgl)
 {
 	ipath_err_t hwerrs;
 	u32 bits, ctrl;
@@ -552,7 +552,7 @@ static int ipath_pe_boardname(struct ipath_devdata *dd, char *name,
  * freeze mode), and enable hardware errors as errors (along with
  * everything else) in errormask
  */
-void ipath_pe_init_hwerrors(struct ipath_devdata *dd)
+static void ipath_pe_init_hwerrors(struct ipath_devdata *dd)
 {
 	ipath_err_t val;
 	u64 extsval;
@@ -577,7 +577,7 @@ void ipath_pe_init_hwerrors(struct ipath_devdata *dd)
  * ipath_pe_bringup_serdes - bring up the serdes
  * @dd: the infinipath device
  */
-int ipath_pe_bringup_serdes(struct ipath_devdata *dd)
+static int ipath_pe_bringup_serdes(struct ipath_devdata *dd)
 {
 	u64 val, tmp, config1;
 	int ret = 0, change = 0;
@@ -694,7 +694,7 @@ int ipath_pe_bringup_serdes(struct ipath_devdata *dd)
  * @dd: the infinipath device
  * Called when driver is being unloaded
  */
-void ipath_pe_quiet_serdes(struct ipath_devdata *dd)
+static void ipath_pe_quiet_serdes(struct ipath_devdata *dd)
 {
 	u64 val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_serdesconfig0);
 
@@ -972,6 +972,8 @@ static int ipath_setup_pe_reset(struct ipath_devdata *dd)
 	/* Use ERROR so it shows up in logs, etc. */
 	ipath_dev_err(dd, "Resetting PE-800 unit %u\n",
 		      dd->ipath_unit);
+	/* keep chip from being accessed in a few places */
+	dd->ipath_flags &= ~(IPATH_INITTED|IPATH_PRESENT);
 	val = dd->ipath_control | INFINIPATH_C_RESET;
 	ipath_write_kreg(dd, dd->ipath_kregs->kr_control, val);
 	mb();
@@ -997,6 +999,8 @@ static int ipath_setup_pe_reset(struct ipath_devdata *dd)
 		if ((r = pci_enable_device(dd->pcidev)))
 			ipath_dev_err(dd, "pci_enable_device failed after "
 				      "reset: %d\n", r);
+		/* whether it worked or not, mark as present, again */
+		dd->ipath_flags |= IPATH_PRESENT;
 		val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_revision);
 		if (val == dd->ipath_revision) {
 			ipath_cdbg(VERBOSE, "Got matching revision "
@@ -1176,6 +1180,8 @@ static int ipath_pe_early_init(struct ipath_devdata *dd)
 	 */
 	dd->ipath_rhdrhead_intr_off = 1ULL<<32;
 
+	ipath_get_eeprom_info(dd);
+
 	return 0;
 }
 
diff --git a/drivers/infiniband/hw/ipath/ipath_qp.c b/drivers/infiniband/hw/ipath/ipath_qp.c
index 6058d70d7577..9f8855d970c8 100644
--- a/drivers/infiniband/hw/ipath/ipath_qp.c
+++ b/drivers/infiniband/hw/ipath/ipath_qp.c
@@ -188,8 +188,8 @@ static void free_qpn(struct ipath_qp_table *qpt, u32 qpn)
  * Allocate the next available QPN and put the QP into the hash table.
  * The hash table holds a reference to the QP.
  */
-int ipath_alloc_qpn(struct ipath_qp_table *qpt, struct ipath_qp *qp,
-		    enum ib_qp_type type)
+static int ipath_alloc_qpn(struct ipath_qp_table *qpt, struct ipath_qp *qp,
+			   enum ib_qp_type type)
 {
 	unsigned long flags;
 	u32 qpn;
@@ -232,7 +232,7 @@ bail:
  * Remove the QP from the table so it can't be found asynchronously by
  * the receive interrupt routine.
  */
-void ipath_free_qp(struct ipath_qp_table *qpt, struct ipath_qp *qp)
+static void ipath_free_qp(struct ipath_qp_table *qpt, struct ipath_qp *qp)
 {
 	struct ipath_qp *q, **qpp;
 	unsigned long flags;
@@ -358,6 +358,65 @@ static void ipath_reset_qp(struct ipath_qp *qp)
 }
 
 /**
+ * ipath_error_qp - put a QP into an error state
+ * @qp: the QP to put into an error state
+ *
+ * Flushes both send and receive work queues.
+ * QP r_rq.lock and s_lock should be held.
+ */
+
+static void ipath_error_qp(struct ipath_qp *qp)
+{
+	struct ipath_ibdev *dev = to_idev(qp->ibqp.device);
+	struct ib_wc wc;
+
+	_VERBS_INFO("QP%d/%d in error state\n",
+		    qp->ibqp.qp_num, qp->remote_qpn);
+
+	spin_lock(&dev->pending_lock);
+	/* XXX What if its already removed by the timeout code? */
+	if (!list_empty(&qp->timerwait))
+		list_del_init(&qp->timerwait);
+	if (!list_empty(&qp->piowait))
+		list_del_init(&qp->piowait);
+	spin_unlock(&dev->pending_lock);
+
+	wc.status = IB_WC_WR_FLUSH_ERR;
+	wc.vendor_err = 0;
+	wc.byte_len = 0;
+	wc.imm_data = 0;
+	wc.qp_num = qp->ibqp.qp_num;
+	wc.src_qp = 0;
+	wc.wc_flags = 0;
+	wc.pkey_index = 0;
+	wc.slid = 0;
+	wc.sl = 0;
+	wc.dlid_path_bits = 0;
+	wc.port_num = 0;
+
+	while (qp->s_last != qp->s_head) {
+		struct ipath_swqe *wqe = get_swqe_ptr(qp, qp->s_last);
+
+		wc.wr_id = wqe->wr.wr_id;
+		wc.opcode = ib_ipath_wc_opcode[wqe->wr.opcode];
+		if (++qp->s_last >= qp->s_size)
+			qp->s_last = 0;
+		ipath_cq_enter(to_icq(qp->ibqp.send_cq), &wc, 1);
+	}
+	qp->s_cur = qp->s_tail = qp->s_head;
+	qp->s_hdrwords = 0;
+	qp->s_ack_state = IB_OPCODE_RC_ACKNOWLEDGE;
+
+	wc.opcode = IB_WC_RECV;
+	while (qp->r_rq.tail != qp->r_rq.head) {
+		wc.wr_id = get_rwqe_ptr(&qp->r_rq, qp->r_rq.tail)->wr_id;
+		if (++qp->r_rq.tail >= qp->r_rq.size)
+			qp->r_rq.tail = 0;
+		ipath_cq_enter(to_icq(qp->ibqp.recv_cq), &wc, 1);
+	}
+}
+
+/**
  * ipath_modify_qp - modify the attributes of a queue pair
  * @ibqp: the queue pair who's attributes we're modifying
  * @attr: the new attributes
@@ -368,6 +427,7 @@ static void ipath_reset_qp(struct ipath_qp *qp)
 int ipath_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr,
 		    int attr_mask)
 {
+	struct ipath_ibdev *dev = to_idev(ibqp->device);
 	struct ipath_qp *qp = to_iqp(ibqp);
 	enum ib_qp_state cur_state, new_state;
 	unsigned long flags;
@@ -384,6 +444,19 @@ int ipath_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr,
 				attr_mask))
 		goto inval;
 
+	if (attr_mask & IB_QP_AV)
+		if (attr->ah_attr.dlid == 0 ||
+		    attr->ah_attr.dlid >= IPS_MULTICAST_LID_BASE)
+			goto inval;
+
+	if (attr_mask & IB_QP_PKEY_INDEX)
+		if (attr->pkey_index >= ipath_layer_get_npkeys(dev->dd))
+			goto inval;
+
+	if (attr_mask & IB_QP_MIN_RNR_TIMER)
+		if (attr->min_rnr_timer > 31)
+			goto inval;
+
 	switch (new_state) {
 	case IB_QPS_RESET:
 		ipath_reset_qp(qp);
@@ -398,13 +471,8 @@ int ipath_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr,
 
 	}
 
-	if (attr_mask & IB_QP_PKEY_INDEX) {
-		struct ipath_ibdev *dev = to_idev(ibqp->device);
-
-		if (attr->pkey_index >= ipath_layer_get_npkeys(dev->dd))
-			goto inval;
+	if (attr_mask & IB_QP_PKEY_INDEX)
 		qp->s_pkey_index = attr->pkey_index;
-	}
 
 	if (attr_mask & IB_QP_DEST_QPN)
 		qp->remote_qpn = attr->dest_qp_num;
@@ -420,12 +488,8 @@ int ipath_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr,
 	if (attr_mask & IB_QP_ACCESS_FLAGS)
 		qp->qp_access_flags = attr->qp_access_flags;
 
-	if (attr_mask & IB_QP_AV) {
-		if (attr->ah_attr.dlid == 0 ||
-		    attr->ah_attr.dlid >= IPS_MULTICAST_LID_BASE)
-			goto inval;
+	if (attr_mask & IB_QP_AV)
 		qp->remote_ah_attr = attr->ah_attr;
-	}
 
 	if (attr_mask & IB_QP_PATH_MTU)
 		qp->path_mtu = attr->path_mtu;
@@ -440,11 +504,8 @@ int ipath_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr,
 		qp->s_rnr_retry_cnt = qp->s_rnr_retry;
 	}
 
-	if (attr_mask & IB_QP_MIN_RNR_TIMER) {
-		if (attr->min_rnr_timer > 31)
-			goto inval;
+	if (attr_mask & IB_QP_MIN_RNR_TIMER)
 		qp->s_min_rnr_timer = attr->min_rnr_timer;
-	}
 
 	if (attr_mask & IB_QP_QKEY)
 		qp->qkey = attr->qkey;
@@ -651,10 +712,8 @@ struct ib_qp *ipath_create_qp(struct ib_pd *ibpd,
 			     init_attr->qp_type == IB_QPT_RC ?
 			     ipath_do_rc_send : ipath_do_uc_send,
 			     (unsigned long)qp);
-		qp->piowait.next = LIST_POISON1;
-		qp->piowait.prev = LIST_POISON2;
-		qp->timerwait.next = LIST_POISON1;
-		qp->timerwait.prev = LIST_POISON2;
+		INIT_LIST_HEAD(&qp->piowait);
+		INIT_LIST_HEAD(&qp->timerwait);
 		qp->state = IB_QPS_RESET;
 		qp->s_wq = swq;
 		qp->s_size = init_attr->cap.max_send_wr + 1;
@@ -675,7 +734,7 @@ struct ib_qp *ipath_create_qp(struct ib_pd *ibpd,
 		ipath_reset_qp(qp);
 
 		/* Tell the core driver that the kernel SMA is present. */
-		if (qp->ibqp.qp_type == IB_QPT_SMI)
+		if (init_attr->qp_type == IB_QPT_SMI)
 			ipath_layer_set_verbs_flags(dev->dd,
 						    IPATH_VERBS_KERNEL_SMA);
 		break;
@@ -724,10 +783,10 @@ int ipath_destroy_qp(struct ib_qp *ibqp)
 
 	/* Make sure the QP isn't on the timeout list. */
 	spin_lock_irqsave(&dev->pending_lock, flags);
-	if (qp->timerwait.next != LIST_POISON1)
-		list_del(&qp->timerwait);
-	if (qp->piowait.next != LIST_POISON1)
-		list_del(&qp->piowait);
+	if (!list_empty(&qp->timerwait))
+		list_del_init(&qp->timerwait);
+	if (!list_empty(&qp->piowait))
+		list_del_init(&qp->piowait);
 	spin_unlock_irqrestore(&dev->pending_lock, flags);
 
 	/*
@@ -796,10 +855,10 @@ void ipath_sqerror_qp(struct ipath_qp *qp, struct ib_wc *wc)
 
 	spin_lock(&dev->pending_lock);
 	/* XXX What if its already removed by the timeout code? */
-	if (qp->timerwait.next != LIST_POISON1)
-		list_del(&qp->timerwait);
-	if (qp->piowait.next != LIST_POISON1)
-		list_del(&qp->piowait);
+	if (!list_empty(&qp->timerwait))
+		list_del_init(&qp->timerwait);
+	if (!list_empty(&qp->piowait))
+		list_del_init(&qp->piowait);
 	spin_unlock(&dev->pending_lock);
 
 	ipath_cq_enter(to_icq(qp->ibqp.send_cq), wc, 1);
@@ -821,65 +880,6 @@ void ipath_sqerror_qp(struct ipath_qp *qp, struct ib_wc *wc)
 }
 
 /**
- * ipath_error_qp - put a QP into an error state
- * @qp: the QP to put into an error state
- *
- * Flushes both send and receive work queues.
- * QP r_rq.lock and s_lock should be held.
- */
-
-void ipath_error_qp(struct ipath_qp *qp)
-{
-	struct ipath_ibdev *dev = to_idev(qp->ibqp.device);
-	struct ib_wc wc;
-
-	_VERBS_INFO("QP%d/%d in error state\n",
-		    qp->ibqp.qp_num, qp->remote_qpn);
-
-	spin_lock(&dev->pending_lock);
-	/* XXX What if its already removed by the timeout code? */
-	if (qp->timerwait.next != LIST_POISON1)
-		list_del(&qp->timerwait);
-	if (qp->piowait.next != LIST_POISON1)
-		list_del(&qp->piowait);
-	spin_unlock(&dev->pending_lock);
-
-	wc.status = IB_WC_WR_FLUSH_ERR;
-	wc.vendor_err = 0;
-	wc.byte_len = 0;
-	wc.imm_data = 0;
-	wc.qp_num = qp->ibqp.qp_num;
-	wc.src_qp = 0;
-	wc.wc_flags = 0;
-	wc.pkey_index = 0;
-	wc.slid = 0;
-	wc.sl = 0;
-	wc.dlid_path_bits = 0;
-	wc.port_num = 0;
-
-	while (qp->s_last != qp->s_head) {
-		struct ipath_swqe *wqe = get_swqe_ptr(qp, qp->s_last);
-
-		wc.wr_id = wqe->wr.wr_id;
-		wc.opcode = ib_ipath_wc_opcode[wqe->wr.opcode];
-		if (++qp->s_last >= qp->s_size)
-			qp->s_last = 0;
-		ipath_cq_enter(to_icq(qp->ibqp.send_cq), &wc, 1);
-	}
-	qp->s_cur = qp->s_tail = qp->s_head;
-	qp->s_hdrwords = 0;
-	qp->s_ack_state = IB_OPCODE_RC_ACKNOWLEDGE;
-
-	wc.opcode = IB_WC_RECV;
-	while (qp->r_rq.tail != qp->r_rq.head) {
-		wc.wr_id = get_rwqe_ptr(&qp->r_rq, qp->r_rq.tail)->wr_id;
-		if (++qp->r_rq.tail >= qp->r_rq.size)
-			qp->r_rq.tail = 0;
-		ipath_cq_enter(to_icq(qp->ibqp.recv_cq), &wc, 1);
-	}
-}
-
-/**
  * ipath_get_credit - flush the send work queue of a QP
  * @qp: the qp who's send work queue to flush
  * @aeth: the Acknowledge Extended Transport Header
diff --git a/drivers/infiniband/hw/ipath/ipath_rc.c b/drivers/infiniband/hw/ipath/ipath_rc.c
index a4055ca00614..493b1821a934 100644
--- a/drivers/infiniband/hw/ipath/ipath_rc.c
+++ b/drivers/infiniband/hw/ipath/ipath_rc.c
@@ -57,7 +57,7 @@ static void ipath_init_restart(struct ipath_qp *qp, struct ipath_swqe *wqe)
 	qp->s_len = wqe->length - len;
 	dev = to_idev(qp->ibqp.device);
 	spin_lock(&dev->pending_lock);
-	if (qp->timerwait.next == LIST_POISON1)
+	if (list_empty(&qp->timerwait))
 		list_add_tail(&qp->timerwait,
 			      &dev->pending[dev->pending_index]);
 	spin_unlock(&dev->pending_lock);
@@ -356,7 +356,7 @@ static inline int ipath_make_rc_req(struct ipath_qp *qp,
 		if ((int)(qp->s_psn - qp->s_next_psn) > 0)
 			qp->s_next_psn = qp->s_psn;
 		spin_lock(&dev->pending_lock);
-		if (qp->timerwait.next == LIST_POISON1)
+		if (list_empty(&qp->timerwait))
 			list_add_tail(&qp->timerwait,
 				      &dev->pending[dev->pending_index]);
 		spin_unlock(&dev->pending_lock);
@@ -726,8 +726,8 @@ void ipath_restart_rc(struct ipath_qp *qp, u32 psn, struct ib_wc *wc)
 	 */
 	dev = to_idev(qp->ibqp.device);
 	spin_lock(&dev->pending_lock);
-	if (qp->timerwait.next != LIST_POISON1)
-		list_del(&qp->timerwait);
+	if (!list_empty(&qp->timerwait))
+		list_del_init(&qp->timerwait);
 	spin_unlock(&dev->pending_lock);
 
 	if (wqe->wr.opcode == IB_WR_RDMA_READ)
@@ -886,8 +886,8 @@ static int do_rc_ack(struct ipath_qp *qp, u32 aeth, u32 psn, int opcode)
 	 * just won't find anything to restart if we ACK everything.
 	 */
 	spin_lock(&dev->pending_lock);
-	if (qp->timerwait.next != LIST_POISON1)
-		list_del(&qp->timerwait);
+	if (!list_empty(&qp->timerwait))
+		list_del_init(&qp->timerwait);
 	spin_unlock(&dev->pending_lock);
 
 	/*
@@ -1194,8 +1194,7 @@ static inline void ipath_rc_rcv_resp(struct ipath_ibdev *dev,
 		     IB_WR_RDMA_READ))
 		goto ack_done;
 	spin_lock(&dev->pending_lock);
-	if (qp->s_rnr_timeout == 0 &&
-	    qp->timerwait.next != LIST_POISON1)
+	if (qp->s_rnr_timeout == 0 && !list_empty(&qp->timerwait))
 		list_move_tail(&qp->timerwait,
 			       &dev->pending[dev->pending_index]);
 	spin_unlock(&dev->pending_lock);
diff --git a/drivers/infiniband/hw/ipath/ipath_registers.h b/drivers/infiniband/hw/ipath/ipath_registers.h
index 1e59750c5f63..402126eb79c9 100644
--- a/drivers/infiniband/hw/ipath/ipath_registers.h
+++ b/drivers/infiniband/hw/ipath/ipath_registers.h
@@ -34,8 +34,9 @@
 #define _IPATH_REGISTERS_H
 
 /*
- * This file should only be included by kernel source, and by the diags.
- * It defines the registers, and their contents, for the InfiniPath HT-400 chip
+ * This file should only be included by kernel source, and by the diags.  It
+ * defines the registers, and their contents, for the InfiniPath HT-400
+ * chip.
  */
 
 /*
@@ -156,8 +157,10 @@
 #define INFINIPATH_IBCC_FLOWCTRLWATERMARK_SHIFT 8
 #define INFINIPATH_IBCC_LINKINITCMD_MASK 0x3ULL
 #define INFINIPATH_IBCC_LINKINITCMD_DISABLE 1
-#define INFINIPATH_IBCC_LINKINITCMD_POLL 2	/* cycle through TS1/TS2 till OK */
-#define INFINIPATH_IBCC_LINKINITCMD_SLEEP 3	/* wait for TS1, then go on */
+/* cycle through TS1/TS2 till OK */
+#define INFINIPATH_IBCC_LINKINITCMD_POLL 2
+/* wait for TS1, then go on */
+#define INFINIPATH_IBCC_LINKINITCMD_SLEEP 3
 #define INFINIPATH_IBCC_LINKINITCMD_SHIFT 16
 #define INFINIPATH_IBCC_LINKCMD_MASK 0x3ULL
 #define INFINIPATH_IBCC_LINKCMD_INIT 1	/* move to 0x11 */
@@ -182,7 +185,8 @@
 #define INFINIPATH_IBCS_LINKSTATE_SHIFT 4
 #define INFINIPATH_IBCS_TXREADY       0x40000000
 #define INFINIPATH_IBCS_TXCREDITOK    0x80000000
-/* link training states (shift by INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT) */
+/* link training states (shift by
+   INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT) */
 #define INFINIPATH_IBCS_LT_STATE_DISABLED	0x00
 #define INFINIPATH_IBCS_LT_STATE_LINKUP		0x01
 #define INFINIPATH_IBCS_LT_STATE_POLLACTIVE	0x02
@@ -267,10 +271,12 @@
 /* kr_serdesconfig0 bits */
 #define INFINIPATH_SERDC0_RESET_MASK  0xfULL	/* overal reset bits */
 #define INFINIPATH_SERDC0_RESET_PLL   0x10000000ULL	/* pll reset */
-#define INFINIPATH_SERDC0_TXIDLE      0xF000ULL	/* tx idle enables (per lane) */
-#define INFINIPATH_SERDC0_RXDETECT_EN 0xF0000ULL	/* rx detect enables (per lane) */
-#define INFINIPATH_SERDC0_L1PWR_DN	 0xF0ULL	/* L1 Power down; use with RXDETECT,
-							   Otherwise not used on IB side */
+/* tx idle enables (per lane) */
+#define INFINIPATH_SERDC0_TXIDLE      0xF000ULL
+/* rx detect enables (per lane) */
+#define INFINIPATH_SERDC0_RXDETECT_EN 0xF0000ULL
+/* L1 Power down; use with RXDETECT, Otherwise not used on IB side */
+#define INFINIPATH_SERDC0_L1PWR_DN	 0xF0ULL
 
 /* kr_xgxsconfig bits */
 #define INFINIPATH_XGXS_RESET          0x7ULL
@@ -390,12 +396,13 @@ struct ipath_kregs {
 	ipath_kreg kr_txintmemsize;
 	ipath_kreg kr_xgxsconfig;
 	ipath_kreg kr_ibpllcfg;
-	/* use these two (and the following N ports) only with ipath_k*_kreg64_port();
-	 * not *kreg64() */
+	/* use these two (and the following N ports) only with
+	 * ipath_k*_kreg64_port(); not *kreg64() */
 	ipath_kreg kr_rcvhdraddr;
 	ipath_kreg kr_rcvhdrtailaddr;
 
-	/* remaining registers are not present on all types of infinipath chips  */
+	/* remaining registers are not present on all types of infinipath
+	   chips  */
 	ipath_kreg kr_rcvpktledcnt;
 	ipath_kreg kr_pcierbuftestreg0;
 	ipath_kreg kr_pcierbuftestreg1;
diff --git a/drivers/infiniband/hw/ipath/ipath_ruc.c b/drivers/infiniband/hw/ipath/ipath_ruc.c
index f232e77b78ee..d38f4f3cfd1d 100644
--- a/drivers/infiniband/hw/ipath/ipath_ruc.c
+++ b/drivers/infiniband/hw/ipath/ipath_ruc.c
@@ -435,7 +435,7 @@ void ipath_no_bufs_available(struct ipath_qp *qp, struct ipath_ibdev *dev)
 	unsigned long flags;
 
 	spin_lock_irqsave(&dev->pending_lock, flags);
-	if (qp->piowait.next == LIST_POISON1)
+	if (list_empty(&qp->piowait))
 		list_add_tail(&qp->piowait, &dev->piowait);
 	spin_unlock_irqrestore(&dev->pending_lock, flags);
 	/*
@@ -531,19 +531,12 @@ int ipath_post_rc_send(struct ipath_qp *qp, struct ib_send_wr *wr)
 	}
 	wqe->wr.num_sge = j;
 	qp->s_head = next;
-	/*
-	 * Wake up the send tasklet if the QP is not waiting
-	 * for an RNR timeout.
-	 */
-	next = qp->s_rnr_timeout;
 	spin_unlock_irqrestore(&qp->s_lock, flags);
 
-	if (next == 0) {
-		if (qp->ibqp.qp_type == IB_QPT_UC)
-			ipath_do_uc_send((unsigned long) qp);
-		else
-			ipath_do_rc_send((unsigned long) qp);
-	}
+	if (qp->ibqp.qp_type == IB_QPT_UC)
+		ipath_do_uc_send((unsigned long) qp);
+	else
+		ipath_do_rc_send((unsigned long) qp);
 
 	ret = 0;
 
diff --git a/drivers/infiniband/hw/ipath/ipath_sysfs.c b/drivers/infiniband/hw/ipath/ipath_sysfs.c
index 32acd8048b49..f323791cc495 100644
--- a/drivers/infiniband/hw/ipath/ipath_sysfs.c
+++ b/drivers/infiniband/hw/ipath/ipath_sysfs.c
@@ -711,10 +711,22 @@ static struct attribute_group dev_attr_group = {
  * enters diag mode.  A device reset is quite likely to crash the
  * machine entirely, so we don't want to normally make it
  * available.
+ *
+ * Called with ipath_mutex held.
  */
 int ipath_expose_reset(struct device *dev)
 {
-	return device_create_file(dev, &dev_attr_reset);
+	static int exposed;
+	int ret;
+
+	if (!exposed) {
+		ret = device_create_file(dev, &dev_attr_reset);
+		exposed = 1;
+	}
+	else
+		ret = 0;
+
+	return ret;
 }
 
 int ipath_driver_create_group(struct device_driver *drv)
diff --git a/drivers/infiniband/hw/ipath/ipath_ud.c b/drivers/infiniband/hw/ipath/ipath_ud.c
index 5ff3de6128b2..e606daf83210 100644
--- a/drivers/infiniband/hw/ipath/ipath_ud.c
+++ b/drivers/infiniband/hw/ipath/ipath_ud.c
@@ -46,8 +46,10 @@
  * This is called from ipath_post_ud_send() to forward a WQE addressed
  * to the same HCA.
  */
-void ipath_ud_loopback(struct ipath_qp *sqp, struct ipath_sge_state *ss,
-		       u32 length, struct ib_send_wr *wr, struct ib_wc *wc)
+static void ipath_ud_loopback(struct ipath_qp *sqp,
+			      struct ipath_sge_state *ss,
+			      u32 length, struct ib_send_wr *wr,
+			      struct ib_wc *wc)
 {
 	struct ipath_ibdev *dev = to_idev(sqp->ibqp.device);
 	struct ipath_qp *qp;
diff --git a/drivers/infiniband/hw/ipath/ipath_verbs.c b/drivers/infiniband/hw/ipath/ipath_verbs.c
index 9f27fd35cdbb..28fdbdaa789d 100644
--- a/drivers/infiniband/hw/ipath/ipath_verbs.c
+++ b/drivers/infiniband/hw/ipath/ipath_verbs.c
@@ -41,7 +41,7 @@
 /* Not static, because we don't want the compiler removing it */
 const char ipath_verbs_version[] = "ipath_verbs " IPATH_IDSTR;
 
-unsigned int ib_ipath_qp_table_size = 251;
+static unsigned int ib_ipath_qp_table_size = 251;
 module_param_named(qp_table_size, ib_ipath_qp_table_size, uint, S_IRUGO);
 MODULE_PARM_DESC(qp_table_size, "QP table size");
 
@@ -87,7 +87,7 @@ const enum ib_wc_opcode ib_ipath_wc_opcode[] = {
 /*
  * System image GUID.
  */
-__be64 sys_image_guid;
+static __be64 sys_image_guid;
 
 /**
  * ipath_copy_sge - copy data to SGE memory
@@ -449,7 +449,6 @@ static void ipath_ib_timer(void *arg)
 {
 	struct ipath_ibdev *dev = (struct ipath_ibdev *) arg;
 	struct ipath_qp *resend = NULL;
-	struct ipath_qp *rnr = NULL;
 	struct list_head *last;
 	struct ipath_qp *qp;
 	unsigned long flags;
@@ -465,32 +464,18 @@ static void ipath_ib_timer(void *arg)
 	last = &dev->pending[dev->pending_index];
 	while (!list_empty(last)) {
 		qp = list_entry(last->next, struct ipath_qp, timerwait);
-		if (last->next == LIST_POISON1 ||
-		    last->next != &qp->timerwait ||
-		    qp->timerwait.prev != last) {
-			INIT_LIST_HEAD(last);
-		} else {
-			list_del(&qp->timerwait);
-			qp->timerwait.prev = (struct list_head *) resend;
-			resend = qp;
-			atomic_inc(&qp->refcount);
-		}
+		list_del_init(&qp->timerwait);
+		qp->timer_next = resend;
+		resend = qp;
+		atomic_inc(&qp->refcount);
 	}
 	last = &dev->rnrwait;
 	if (!list_empty(last)) {
 		qp = list_entry(last->next, struct ipath_qp, timerwait);
 		if (--qp->s_rnr_timeout == 0) {
 			do {
-				if (last->next == LIST_POISON1 ||
-				    last->next != &qp->timerwait ||
-				    qp->timerwait.prev != last) {
-					INIT_LIST_HEAD(last);
-					break;
-				}
-				list_del(&qp->timerwait);
-				qp->timerwait.prev =
-					(struct list_head *) rnr;
-				rnr = qp;
+				list_del_init(&qp->timerwait);
+				tasklet_hi_schedule(&qp->s_task);
 				if (list_empty(last))
 					break;
 				qp = list_entry(last->next, struct ipath_qp,
@@ -530,8 +515,7 @@ static void ipath_ib_timer(void *arg)
 	spin_unlock_irqrestore(&dev->pending_lock, flags);
 
 	/* XXX What if timer fires again while this is running? */
-	for (qp = resend; qp != NULL;
-	     qp = (struct ipath_qp *) qp->timerwait.prev) {
+	for (qp = resend; qp != NULL; qp = qp->timer_next) {
 		struct ib_wc wc;
 
 		spin_lock_irqsave(&qp->s_lock, flags);
@@ -545,9 +529,6 @@ static void ipath_ib_timer(void *arg)
 		if (atomic_dec_and_test(&qp->refcount))
 			wake_up(&qp->wait);
 	}
-	for (qp = rnr; qp != NULL;
-	     qp = (struct ipath_qp *) qp->timerwait.prev)
-		tasklet_hi_schedule(&qp->s_task);
 }
 
 /**
@@ -556,9 +537,9 @@ static void ipath_ib_timer(void *arg)
  *
  * This is called from ipath_intr() at interrupt level when a PIO buffer is
  * available after ipath_verbs_send() returned an error that no buffers were
- * available.  Return 0 if we consumed all the PIO buffers and we still have
+ * available.  Return 1 if we consumed all the PIO buffers and we still have
  * QPs waiting for buffers (for now, just do a tasklet_hi_schedule and
- * return one).
+ * return zero).
  */
 static int ipath_ib_piobufavail(void *arg)
 {
@@ -573,13 +554,13 @@ static int ipath_ib_piobufavail(void *arg)
 	while (!list_empty(&dev->piowait)) {
 		qp = list_entry(dev->piowait.next, struct ipath_qp,
 				piowait);
-		list_del(&qp->piowait);
+		list_del_init(&qp->piowait);
 		tasklet_hi_schedule(&qp->s_task);
 	}
 	spin_unlock_irqrestore(&dev->pending_lock, flags);
 
 bail:
-	return 1;
+	return 0;
 }
 
 static int ipath_query_device(struct ib_device *ibdev,
@@ -970,6 +951,7 @@ static void *ipath_register_ib_device(int unit, struct ipath_devdata *dd)
 	idev->dd = dd;
 
 	strlcpy(dev->name, "ipath%d", IB_DEVICE_NAME_MAX);
+	dev->owner = THIS_MODULE;
 	dev->node_guid = ipath_layer_get_guid(dd);
 	dev->uverbs_abi_ver = IPATH_UVERBS_ABI_VERSION;
 	dev->uverbs_cmd_mask =
@@ -1110,7 +1092,7 @@ static void ipath_unregister_ib_device(void *arg)
 	ib_dealloc_device(ibdev);
 }
 
-int __init ipath_verbs_init(void)
+static int __init ipath_verbs_init(void)
 {
 	return ipath_verbs_register(ipath_register_ib_device,
 				    ipath_unregister_ib_device,
@@ -1118,33 +1100,33 @@ int __init ipath_verbs_init(void)
 				    ipath_ib_timer);
 }
 
-void __exit ipath_verbs_cleanup(void)
+static void __exit ipath_verbs_cleanup(void)
 {
 	ipath_verbs_unregister();
 }
 
 static ssize_t show_rev(struct class_device *cdev, char *buf)
 {
-        struct ipath_ibdev *dev =
-                container_of(cdev, struct ipath_ibdev, ibdev.class_dev);
-        int vendor, boardrev, majrev, minrev;
+	struct ipath_ibdev *dev =
+		container_of(cdev, struct ipath_ibdev, ibdev.class_dev);
+	int vendor, boardrev, majrev, minrev;
 
-        ipath_layer_query_device(dev->dd, &vendor, &boardrev,
-                                 &majrev, &minrev);
-        return sprintf(buf, "%d.%d\n", majrev, minrev);
+	ipath_layer_query_device(dev->dd, &vendor, &boardrev,
+				 &majrev, &minrev);
+	return sprintf(buf, "%d.%d\n", majrev, minrev);
 }
 
 static ssize_t show_hca(struct class_device *cdev, char *buf)
 {
-        struct ipath_ibdev *dev =
-                container_of(cdev, struct ipath_ibdev, ibdev.class_dev);
-        int ret;
+	struct ipath_ibdev *dev =
+		container_of(cdev, struct ipath_ibdev, ibdev.class_dev);
+	int ret;
 
-        ret = ipath_layer_get_boardname(dev->dd, buf, 128);
-        if (ret < 0)
-                goto bail;
-        strcat(buf, "\n");
-        ret = strlen(buf);
+	ret = ipath_layer_get_boardname(dev->dd, buf, 128);
+	if (ret < 0)
+		goto bail;
+	strcat(buf, "\n");
+	ret = strlen(buf);
 
 bail:
 	return ret;
@@ -1152,40 +1134,40 @@ bail:
 
 static ssize_t show_stats(struct class_device *cdev, char *buf)
 {
-        struct ipath_ibdev *dev =
-                container_of(cdev, struct ipath_ibdev, ibdev.class_dev);
-        int i;
-        int len;
-
-        len = sprintf(buf,
-                      "RC resends  %d\n"
-                      "RC QACKs    %d\n"
-                      "RC ACKs     %d\n"
-                      "RC SEQ NAKs %d\n"
-                      "RC RDMA seq %d\n"
-                      "RC RNR NAKs %d\n"
-                      "RC OTH NAKs %d\n"
-                      "RC timeouts %d\n"
-                      "RC RDMA dup %d\n"
-                      "piobuf wait %d\n"
-                      "no piobuf   %d\n"
-                      "PKT drops   %d\n"
-                      "WQE errs    %d\n",
-                      dev->n_rc_resends, dev->n_rc_qacks, dev->n_rc_acks,
-                      dev->n_seq_naks, dev->n_rdma_seq, dev->n_rnr_naks,
-                      dev->n_other_naks, dev->n_timeouts,
-                      dev->n_rdma_dup_busy, dev->n_piowait,
-                      dev->n_no_piobuf, dev->n_pkt_drops, dev->n_wqe_errs);
-        for (i = 0; i < ARRAY_SIZE(dev->opstats); i++) {
+	struct ipath_ibdev *dev =
+		container_of(cdev, struct ipath_ibdev, ibdev.class_dev);
+	int i;
+	int len;
+
+	len = sprintf(buf,
+		      "RC resends  %d\n"
+		      "RC no QACK  %d\n"
+		      "RC ACKs     %d\n"
+		      "RC SEQ NAKs %d\n"
+		      "RC RDMA seq %d\n"
+		      "RC RNR NAKs %d\n"
+		      "RC OTH NAKs %d\n"
+		      "RC timeouts %d\n"
+		      "RC RDMA dup %d\n"
+		      "piobuf wait %d\n"
+		      "no piobuf   %d\n"
+		      "PKT drops   %d\n"
+		      "WQE errs    %d\n",
+		      dev->n_rc_resends, dev->n_rc_qacks, dev->n_rc_acks,
+		      dev->n_seq_naks, dev->n_rdma_seq, dev->n_rnr_naks,
+		      dev->n_other_naks, dev->n_timeouts,
+		      dev->n_rdma_dup_busy, dev->n_piowait,
+		      dev->n_no_piobuf, dev->n_pkt_drops, dev->n_wqe_errs);
+	for (i = 0; i < ARRAY_SIZE(dev->opstats); i++) {
 		const struct ipath_opcode_stats *si = &dev->opstats[i];
 
-                if (!si->n_packets && !si->n_bytes)
-                        continue;
-                len += sprintf(buf + len, "%02x %llu/%llu\n", i,
+		if (!si->n_packets && !si->n_bytes)
+			continue;
+		len += sprintf(buf + len, "%02x %llu/%llu\n", i,
 			       (unsigned long long) si->n_packets,
-                               (unsigned long long) si->n_bytes);
-        }
-        return len;
+			       (unsigned long long) si->n_bytes);
+	}
+	return len;
 }
 
 static CLASS_DEVICE_ATTR(hw_rev, S_IRUGO, show_rev, NULL);
@@ -1194,25 +1176,25 @@ static CLASS_DEVICE_ATTR(board_id, S_IRUGO, show_hca, NULL);
 static CLASS_DEVICE_ATTR(stats, S_IRUGO, show_stats, NULL);
 
 static struct class_device_attribute *ipath_class_attributes[] = {
-        &class_device_attr_hw_rev,
-        &class_device_attr_hca_type,
-        &class_device_attr_board_id,
-        &class_device_attr_stats
+	&class_device_attr_hw_rev,
+	&class_device_attr_hca_type,
+	&class_device_attr_board_id,
+	&class_device_attr_stats
 };
 
 static int ipath_verbs_register_sysfs(struct ib_device *dev)
 {
-        int i;
+	int i;
 	int ret;
 
-        for (i = 0; i < ARRAY_SIZE(ipath_class_attributes); ++i)
-                if (class_device_create_file(&dev->class_dev,
-                                             ipath_class_attributes[i])) {
-                        ret = 1;
+	for (i = 0; i < ARRAY_SIZE(ipath_class_attributes); ++i)
+		if (class_device_create_file(&dev->class_dev,
+					     ipath_class_attributes[i])) {
+			ret = 1;
 			goto bail;
 		}
 
-        ret = 0;
+	ret = 0;
 
 bail:
 	return ret;
diff --git a/drivers/infiniband/hw/ipath/ipath_verbs.h b/drivers/infiniband/hw/ipath/ipath_verbs.h
index b824632b2a8c..4f8d59300e9b 100644
--- a/drivers/infiniband/hw/ipath/ipath_verbs.h
+++ b/drivers/infiniband/hw/ipath/ipath_verbs.h
@@ -282,7 +282,8 @@ struct ipath_srq {
  */
 struct ipath_qp {
 	struct ib_qp ibqp;
-	struct ipath_qp *next;	/* link list for QPN hash table */
+	struct ipath_qp *next;		/* link list for QPN hash table */
+	struct ipath_qp *timer_next;	/* link list for ipath_ib_timer() */
 	struct list_head piowait;	/* link for wait PIO buf */
 	struct list_head timerwait;	/* link for waiting for timeouts */
 	struct ib_ah_attr remote_ah_attr;
@@ -577,8 +578,6 @@ int ipath_init_qp_table(struct ipath_ibdev *idev, int size);
 
 void ipath_sqerror_qp(struct ipath_qp *qp, struct ib_wc *wc);
 
-void ipath_error_qp(struct ipath_qp *qp);
-
 void ipath_get_credit(struct ipath_qp *qp, u32 aeth);
 
 void ipath_do_rc_send(unsigned long data);
@@ -607,9 +606,6 @@ void ipath_rc_rcv(struct ipath_ibdev *dev, struct ipath_ib_header *hdr,
 
 void ipath_restart_rc(struct ipath_qp *qp, u32 psn, struct ib_wc *wc);
 
-void ipath_ud_loopback(struct ipath_qp *sqp, struct ipath_sge_state *ss,
-		       u32 length, struct ib_send_wr *wr, struct ib_wc *wc);
-
 int ipath_post_ud_send(struct ipath_qp *qp, struct ib_send_wr *wr);
 
 void ipath_ud_rcv(struct ipath_ibdev *dev, struct ipath_ib_header *hdr,
diff --git a/drivers/infiniband/hw/ipath/ips_common.h b/drivers/infiniband/hw/ipath/ips_common.h
index 410a764dfcef..ab7cbbbfd03a 100644
--- a/drivers/infiniband/hw/ipath/ips_common.h
+++ b/drivers/infiniband/hw/ipath/ips_common.h
@@ -95,7 +95,7 @@ struct ether_header {
 	__u8 seq_num;
 	__le32 len;
 	/* MUST be of word size due to PIO write requirements */
-	__u32 csum;
+	__le32 csum;
 	__le16 csum_offset;
 	__le16 flags;
 	__u16 first_2_bytes;
diff --git a/drivers/infiniband/hw/mthca/mthca_cmd.c b/drivers/infiniband/hw/mthca/mthca_cmd.c
index 1985b5dfa481..798e13e14faf 100644
--- a/drivers/infiniband/hw/mthca/mthca_cmd.c
+++ b/drivers/infiniband/hw/mthca/mthca_cmd.c
@@ -182,7 +182,7 @@ struct mthca_cmd_context {
 	u8                status;
 };
 
-static int fw_cmd_doorbell = 1;
+static int fw_cmd_doorbell = 0;
 module_param(fw_cmd_doorbell, int, 0644);
 MODULE_PARM_DESC(fw_cmd_doorbell, "post FW commands through doorbell page if nonzero "
 		 "(and supported by FW)");
diff --git a/drivers/infiniband/hw/mthca/mthca_cq.c b/drivers/infiniband/hw/mthca/mthca_cq.c
index 312cf90731ea..205854e9c662 100644
--- a/drivers/infiniband/hw/mthca/mthca_cq.c
+++ b/drivers/infiniband/hw/mthca/mthca_cq.c
@@ -238,9 +238,9 @@ void mthca_cq_event(struct mthca_dev *dev, u32 cqn,
 	spin_lock(&dev->cq_table.lock);
 
 	cq = mthca_array_get(&dev->cq_table.cq, cqn & (dev->limits.num_cqs - 1));
-
 	if (cq)
-		atomic_inc(&cq->refcount);
+		++cq->refcount;
+
 	spin_unlock(&dev->cq_table.lock);
 
 	if (!cq) {
@@ -254,8 +254,10 @@ void mthca_cq_event(struct mthca_dev *dev, u32 cqn,
 	if (cq->ibcq.event_handler)
 		cq->ibcq.event_handler(&event, cq->ibcq.cq_context);
 
-	if (atomic_dec_and_test(&cq->refcount))
+	spin_lock(&dev->cq_table.lock);
+	if (!--cq->refcount)
 		wake_up(&cq->wait);
+	spin_unlock(&dev->cq_table.lock);
 }
 
 static inline int is_recv_cqe(struct mthca_cqe *cqe)
@@ -267,23 +269,13 @@ static inline int is_recv_cqe(struct mthca_cqe *cqe)
 		return !(cqe->is_send & 0x80);
 }
 
-void mthca_cq_clean(struct mthca_dev *dev, u32 cqn, u32 qpn,
+void mthca_cq_clean(struct mthca_dev *dev, struct mthca_cq *cq, u32 qpn,
 		    struct mthca_srq *srq)
 {
-	struct mthca_cq *cq;
 	struct mthca_cqe *cqe;
 	u32 prod_index;
 	int nfreed = 0;
 
-	spin_lock_irq(&dev->cq_table.lock);
-	cq = mthca_array_get(&dev->cq_table.cq, cqn & (dev->limits.num_cqs - 1));
-	if (cq)
-		atomic_inc(&cq->refcount);
-	spin_unlock_irq(&dev->cq_table.lock);
-
-	if (!cq)
-		return;
-
 	spin_lock_irq(&cq->lock);
 
 	/*
@@ -301,7 +293,7 @@ void mthca_cq_clean(struct mthca_dev *dev, u32 cqn, u32 qpn,
 
 	if (0)
 		mthca_dbg(dev, "Cleaning QPN %06x from CQN %06x; ci %d, pi %d\n",
-			  qpn, cqn, cq->cons_index, prod_index);
+			  qpn, cq->cqn, cq->cons_index, prod_index);
 
 	/*
 	 * Now sweep backwards through the CQ, removing CQ entries
@@ -325,8 +317,6 @@ void mthca_cq_clean(struct mthca_dev *dev, u32 cqn, u32 qpn,
 	}
 
 	spin_unlock_irq(&cq->lock);
-	if (atomic_dec_and_test(&cq->refcount))
-		wake_up(&cq->wait);
 }
 
 void mthca_cq_resize_copy_cqes(struct mthca_cq *cq)
@@ -821,7 +811,7 @@ int mthca_init_cq(struct mthca_dev *dev, int nent,
 	}
 
 	spin_lock_init(&cq->lock);
-	atomic_set(&cq->refcount, 1);
+	cq->refcount = 1;
 	init_waitqueue_head(&cq->wait);
 
 	memset(cq_context, 0, sizeof *cq_context);
@@ -896,6 +886,17 @@ err_out:
 	return err;
 }
 
+static inline int get_cq_refcount(struct mthca_dev *dev, struct mthca_cq *cq)
+{
+	int c;
+
+	spin_lock_irq(&dev->cq_table.lock);
+	c = cq->refcount;
+	spin_unlock_irq(&dev->cq_table.lock);
+
+	return c;
+}
+
 void mthca_free_cq(struct mthca_dev *dev,
 		   struct mthca_cq *cq)
 {
@@ -929,6 +930,7 @@ void mthca_free_cq(struct mthca_dev *dev,
 	spin_lock_irq(&dev->cq_table.lock);
 	mthca_array_clear(&dev->cq_table.cq,
 			  cq->cqn & (dev->limits.num_cqs - 1));
+	--cq->refcount;
 	spin_unlock_irq(&dev->cq_table.lock);
 
 	if (dev->mthca_flags & MTHCA_FLAG_MSI_X)
@@ -936,8 +938,7 @@ void mthca_free_cq(struct mthca_dev *dev,
 	else
 		synchronize_irq(dev->pdev->irq);
 
-	atomic_dec(&cq->refcount);
-	wait_event(cq->wait, !atomic_read(&cq->refcount));
+	wait_event(cq->wait, !get_cq_refcount(dev, cq));
 
 	if (cq->is_kernel) {
 		mthca_free_cq_buf(dev, &cq->buf, cq->ibcq.cqe);
diff --git a/drivers/infiniband/hw/mthca/mthca_dev.h b/drivers/infiniband/hw/mthca/mthca_dev.h
index 4c1dcb4c1822..f8160b8de090 100644
--- a/drivers/infiniband/hw/mthca/mthca_dev.h
+++ b/drivers/infiniband/hw/mthca/mthca_dev.h
@@ -496,7 +496,7 @@ void mthca_free_cq(struct mthca_dev *dev,
 void mthca_cq_completion(struct mthca_dev *dev, u32 cqn);
 void mthca_cq_event(struct mthca_dev *dev, u32 cqn,
 		    enum ib_event_type event_type);
-void mthca_cq_clean(struct mthca_dev *dev, u32 cqn, u32 qpn,
+void mthca_cq_clean(struct mthca_dev *dev, struct mthca_cq *cq, u32 qpn,
 		    struct mthca_srq *srq);
 void mthca_cq_resize_copy_cqes(struct mthca_cq *cq);
 int mthca_alloc_cq_buf(struct mthca_dev *dev, struct mthca_cq_buf *buf, int nent);
diff --git a/drivers/infiniband/hw/mthca/mthca_mad.c b/drivers/infiniband/hw/mthca/mthca_mad.c
index f235c7ea42f0..4730863ece9a 100644
--- a/drivers/infiniband/hw/mthca/mthca_mad.c
+++ b/drivers/infiniband/hw/mthca/mthca_mad.c
@@ -49,7 +49,7 @@ enum {
 	MTHCA_VENDOR_CLASS2 = 0xa
 };
 
-int mthca_update_rate(struct mthca_dev *dev, u8 port_num)
+static int mthca_update_rate(struct mthca_dev *dev, u8 port_num)
 {
 	struct ib_port_attr *tprops = NULL;
 	int                  ret;
diff --git a/drivers/infiniband/hw/mthca/mthca_mr.c b/drivers/infiniband/hw/mthca/mthca_mr.c
index 25e1c1db9a40..a486dec1707e 100644
--- a/drivers/infiniband/hw/mthca/mthca_mr.c
+++ b/drivers/infiniband/hw/mthca/mthca_mr.c
@@ -761,6 +761,7 @@ void mthca_arbel_fmr_unmap(struct mthca_dev *dev, struct mthca_fmr *fmr)
 
 int __devinit mthca_init_mr_table(struct mthca_dev *dev)
 {
+	unsigned long addr;
 	int err, i;
 
 	err = mthca_alloc_init(&dev->mr_table.mpt_alloc,
@@ -796,9 +797,12 @@ int __devinit mthca_init_mr_table(struct mthca_dev *dev)
 			goto err_fmr_mpt;
 		}
 
+		addr = pci_resource_start(dev->pdev, 4) +
+			((pci_resource_len(dev->pdev, 4) - 1) &
+			 dev->mr_table.mpt_base);
+
 		dev->mr_table.tavor_fmr.mpt_base =
-			ioremap(dev->mr_table.mpt_base,
-				(1 << i) * sizeof (struct mthca_mpt_entry));
+			ioremap(addr, (1 << i) * sizeof(struct mthca_mpt_entry));
 
 		if (!dev->mr_table.tavor_fmr.mpt_base) {
 			mthca_warn(dev, "MPT ioremap for FMR failed.\n");
@@ -806,9 +810,12 @@ int __devinit mthca_init_mr_table(struct mthca_dev *dev)
 			goto err_fmr_mpt;
 		}
 
+		addr = pci_resource_start(dev->pdev, 4) +
+			((pci_resource_len(dev->pdev, 4) - 1) &
+			 dev->mr_table.mtt_base);
+
 		dev->mr_table.tavor_fmr.mtt_base =
-			ioremap(dev->mr_table.mtt_base,
-				(1 << i) * MTHCA_MTT_SEG_SIZE);
+			ioremap(addr, (1 << i) * MTHCA_MTT_SEG_SIZE);
 		if (!dev->mr_table.tavor_fmr.mtt_base) {
 			mthca_warn(dev, "MTT ioremap for FMR failed.\n");
 			err = -ENOMEM;
diff --git a/drivers/infiniband/hw/mthca/mthca_provider.c b/drivers/infiniband/hw/mthca/mthca_provider.c
index 565a24b1756f..a2eae8a30167 100644
--- a/drivers/infiniband/hw/mthca/mthca_provider.c
+++ b/drivers/infiniband/hw/mthca/mthca_provider.c
@@ -306,7 +306,7 @@ static int mthca_query_gid(struct ib_device *ibdev, u8 port,
 		goto out;
 	}
 
-	memcpy(gid->raw + 8, out_mad->data + (index % 8) * 16, 8);
+	memcpy(gid->raw + 8, out_mad->data + (index % 8) * 8, 8);
 
  out:
 	kfree(in_mad);
diff --git a/drivers/infiniband/hw/mthca/mthca_provider.h b/drivers/infiniband/hw/mthca/mthca_provider.h
index 6676a786d690..179a8f610d0f 100644
--- a/drivers/infiniband/hw/mthca/mthca_provider.h
+++ b/drivers/infiniband/hw/mthca/mthca_provider.h
@@ -139,11 +139,12 @@ struct mthca_ah {
  * a qp may be locked, with the send cq locked first.  No other
  * nesting should be done.
  *
- * Each struct mthca_cq/qp also has an atomic_t ref count.  The
- * pointer from the cq/qp_table to the struct counts as one reference.
- * This reference also is good for access through the consumer API, so
- * modifying the CQ/QP etc doesn't need to take another reference.
- * Access because of a completion being polled does need a reference.
+ * Each struct mthca_cq/qp also has an ref count, protected by the
+ * corresponding table lock.  The pointer from the cq/qp_table to the
+ * struct counts as one reference.  This reference also is good for
+ * access through the consumer API, so modifying the CQ/QP etc doesn't
+ * need to take another reference.  Access to a QP because of a
+ * completion being polled does not need a reference either.
  *
  * Finally, each struct mthca_cq/qp has a wait_queue_head_t for the
  * destroy function to sleep on.
@@ -159,8 +160,9 @@ struct mthca_ah {
  * - decrement ref count; if zero, wake up waiters
  *
  * To destroy a CQ/QP, we can do the following:
- * - lock cq/qp_table, remove pointer, unlock cq/qp_table lock
- * - decrement ref count
+ * - lock cq/qp_table
+ * - remove pointer and decrement ref count
+ * - unlock cq/qp_table lock
  * - wait_event until ref count is zero
  *
  * It is the consumer's responsibilty to make sure that no QP
@@ -197,7 +199,7 @@ struct mthca_cq_resize {
 struct mthca_cq {
 	struct ib_cq		ibcq;
 	spinlock_t		lock;
-	atomic_t		refcount;
+	int			refcount;
 	int			cqn;
 	u32			cons_index;
 	struct mthca_cq_buf	buf;
@@ -217,7 +219,7 @@ struct mthca_cq {
 struct mthca_srq {
 	struct ib_srq		ibsrq;
 	spinlock_t		lock;
-	atomic_t		refcount;
+	int			refcount;
 	int			srqn;
 	int			max;
 	int			max_gs;
@@ -254,7 +256,7 @@ struct mthca_wq {
 
 struct mthca_qp {
 	struct ib_qp           ibqp;
-	atomic_t               refcount;
+	int                    refcount;
 	u32                    qpn;
 	int                    is_direct;
 	u8                     port; /* for SQP and memfree use only */
diff --git a/drivers/infiniband/hw/mthca/mthca_qp.c b/drivers/infiniband/hw/mthca/mthca_qp.c
index f37b0e367323..07c13be07a4a 100644
--- a/drivers/infiniband/hw/mthca/mthca_qp.c
+++ b/drivers/infiniband/hw/mthca/mthca_qp.c
@@ -240,7 +240,7 @@ void mthca_qp_event(struct mthca_dev *dev, u32 qpn,
 	spin_lock(&dev->qp_table.lock);
 	qp = mthca_array_get(&dev->qp_table.qp, qpn & (dev->limits.num_qps - 1));
 	if (qp)
-		atomic_inc(&qp->refcount);
+		++qp->refcount;
 	spin_unlock(&dev->qp_table.lock);
 
 	if (!qp) {
@@ -257,8 +257,10 @@ void mthca_qp_event(struct mthca_dev *dev, u32 qpn,
 	if (qp->ibqp.event_handler)
 		qp->ibqp.event_handler(&event, qp->ibqp.qp_context);
 
-	if (atomic_dec_and_test(&qp->refcount))
+	spin_lock(&dev->qp_table.lock);
+	if (!--qp->refcount)
 		wake_up(&qp->wait);
+	spin_unlock(&dev->qp_table.lock);
 }
 
 static int to_mthca_state(enum ib_qp_state ib_state)
@@ -833,10 +835,10 @@ int mthca_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr, int attr_mask)
 	 * entries and reinitialize the QP.
 	 */
 	if (new_state == IB_QPS_RESET && !qp->ibqp.uobject) {
-		mthca_cq_clean(dev, to_mcq(qp->ibqp.send_cq)->cqn, qp->qpn,
+		mthca_cq_clean(dev, to_mcq(qp->ibqp.send_cq), qp->qpn,
 			       qp->ibqp.srq ? to_msrq(qp->ibqp.srq) : NULL);
 		if (qp->ibqp.send_cq != qp->ibqp.recv_cq)
-			mthca_cq_clean(dev, to_mcq(qp->ibqp.recv_cq)->cqn, qp->qpn,
+			mthca_cq_clean(dev, to_mcq(qp->ibqp.recv_cq), qp->qpn,
 				       qp->ibqp.srq ? to_msrq(qp->ibqp.srq) : NULL);
 
 		mthca_wq_init(&qp->sq);
@@ -1096,7 +1098,7 @@ static int mthca_alloc_qp_common(struct mthca_dev *dev,
 	int ret;
 	int i;
 
-	atomic_set(&qp->refcount, 1);
+	qp->refcount = 1;
 	init_waitqueue_head(&qp->wait);
 	qp->state    	 = IB_QPS_RESET;
 	qp->atomic_rd_en = 0;
@@ -1318,6 +1320,17 @@ int mthca_alloc_sqp(struct mthca_dev *dev,
 	return err;
 }
 
+static inline int get_qp_refcount(struct mthca_dev *dev, struct mthca_qp *qp)
+{
+	int c;
+
+	spin_lock_irq(&dev->qp_table.lock);
+	c = qp->refcount;
+	spin_unlock_irq(&dev->qp_table.lock);
+
+	return c;
+}
+
 void mthca_free_qp(struct mthca_dev *dev,
 		   struct mthca_qp *qp)
 {
@@ -1339,14 +1352,14 @@ void mthca_free_qp(struct mthca_dev *dev,
 	spin_lock(&dev->qp_table.lock);
 	mthca_array_clear(&dev->qp_table.qp,
 			  qp->qpn & (dev->limits.num_qps - 1));
+	--qp->refcount;
 	spin_unlock(&dev->qp_table.lock);
 
 	if (send_cq != recv_cq)
 		spin_unlock(&recv_cq->lock);
 	spin_unlock_irq(&send_cq->lock);
 
-	atomic_dec(&qp->refcount);
-	wait_event(qp->wait, !atomic_read(&qp->refcount));
+	wait_event(qp->wait, !get_qp_refcount(dev, qp));
 
 	if (qp->state != IB_QPS_RESET)
 		mthca_MODIFY_QP(dev, qp->state, IB_QPS_RESET, qp->qpn, 0,
@@ -1358,10 +1371,10 @@ void mthca_free_qp(struct mthca_dev *dev,
 	 * unref the mem-free tables and free the QPN in our table.
 	 */
 	if (!qp->ibqp.uobject) {
-		mthca_cq_clean(dev, to_mcq(qp->ibqp.send_cq)->cqn, qp->qpn,
+		mthca_cq_clean(dev, to_mcq(qp->ibqp.send_cq), qp->qpn,
 			       qp->ibqp.srq ? to_msrq(qp->ibqp.srq) : NULL);
 		if (qp->ibqp.send_cq != qp->ibqp.recv_cq)
-			mthca_cq_clean(dev, to_mcq(qp->ibqp.recv_cq)->cqn, qp->qpn,
+			mthca_cq_clean(dev, to_mcq(qp->ibqp.recv_cq), qp->qpn,
 				       qp->ibqp.srq ? to_msrq(qp->ibqp.srq) : NULL);
 
 		mthca_free_memfree(dev, qp);
@@ -1714,23 +1727,7 @@ int mthca_tavor_post_receive(struct ib_qp *ibqp, struct ib_recv_wr *wr,
 
 	ind = qp->rq.next_ind;
 
-	for (nreq = 0; wr; ++nreq, wr = wr->next) {
-		if (unlikely(nreq == MTHCA_TAVOR_MAX_WQES_PER_RECV_DB)) {
-			nreq = 0;
-
-			doorbell[0] = cpu_to_be32((qp->rq.next_ind << qp->rq.wqe_shift) | size0);
-			doorbell[1] = cpu_to_be32(qp->qpn << 8);
-
-			wmb();
-
-			mthca_write64(doorbell,
-				      dev->kar + MTHCA_RECEIVE_DOORBELL,
-				      MTHCA_GET_DOORBELL_LOCK(&dev->doorbell_lock));
-
-			qp->rq.head += MTHCA_TAVOR_MAX_WQES_PER_RECV_DB;
-			size0 = 0;
-		}
-
+	for (nreq = 0; wr; wr = wr->next) {
 		if (mthca_wq_overflow(&qp->rq, nreq, qp->ibqp.recv_cq)) {
 			mthca_err(dev, "RQ %06x full (%u head, %u tail,"
 					" %d max, %d nreq)\n", qp->qpn,
@@ -1784,6 +1781,23 @@ int mthca_tavor_post_receive(struct ib_qp *ibqp, struct ib_recv_wr *wr,
 		++ind;
 		if (unlikely(ind >= qp->rq.max))
 			ind -= qp->rq.max;
+
+		++nreq;
+		if (unlikely(nreq == MTHCA_TAVOR_MAX_WQES_PER_RECV_DB)) {
+			nreq = 0;
+
+			doorbell[0] = cpu_to_be32((qp->rq.next_ind << qp->rq.wqe_shift) | size0);
+			doorbell[1] = cpu_to_be32(qp->qpn << 8);
+
+			wmb();
+
+			mthca_write64(doorbell,
+				      dev->kar + MTHCA_RECEIVE_DOORBELL,
+				      MTHCA_GET_DOORBELL_LOCK(&dev->doorbell_lock));
+
+			qp->rq.head += MTHCA_TAVOR_MAX_WQES_PER_RECV_DB;
+			size0 = 0;
+		}
 	}
 
 out:
diff --git a/drivers/infiniband/hw/mthca/mthca_srq.c b/drivers/infiniband/hw/mthca/mthca_srq.c
index adcaf85355ae..b292fefa3b41 100644
--- a/drivers/infiniband/hw/mthca/mthca_srq.c
+++ b/drivers/infiniband/hw/mthca/mthca_srq.c
@@ -241,7 +241,7 @@ int mthca_alloc_srq(struct mthca_dev *dev, struct mthca_pd *pd,
 		goto err_out_mailbox;
 
 	spin_lock_init(&srq->lock);
-	atomic_set(&srq->refcount, 1);
+	srq->refcount = 1;
 	init_waitqueue_head(&srq->wait);
 
 	if (mthca_is_memfree(dev))
@@ -308,6 +308,17 @@ err_out:
 	return err;
 }
 
+static inline int get_srq_refcount(struct mthca_dev *dev, struct mthca_srq *srq)
+{
+	int c;
+
+	spin_lock_irq(&dev->srq_table.lock);
+	c = srq->refcount;
+	spin_unlock_irq(&dev->srq_table.lock);
+
+	return c;
+}
+
 void mthca_free_srq(struct mthca_dev *dev, struct mthca_srq *srq)
 {
 	struct mthca_mailbox *mailbox;
@@ -329,10 +340,10 @@ void mthca_free_srq(struct mthca_dev *dev, struct mthca_srq *srq)
 	spin_lock_irq(&dev->srq_table.lock);
 	mthca_array_clear(&dev->srq_table.srq,
 			  srq->srqn & (dev->limits.num_srqs - 1));
+	--srq->refcount;
 	spin_unlock_irq(&dev->srq_table.lock);
 
-	atomic_dec(&srq->refcount);
-	wait_event(srq->wait, !atomic_read(&srq->refcount));
+	wait_event(srq->wait, !get_srq_refcount(dev, srq));
 
 	if (!srq->ibsrq.uobject) {
 		mthca_free_srq_buf(dev, srq);
@@ -414,7 +425,7 @@ void mthca_srq_event(struct mthca_dev *dev, u32 srqn,
 	spin_lock(&dev->srq_table.lock);
 	srq = mthca_array_get(&dev->srq_table.srq, srqn & (dev->limits.num_srqs - 1));
 	if (srq)
-		atomic_inc(&srq->refcount);
+		++srq->refcount;
 	spin_unlock(&dev->srq_table.lock);
 
 	if (!srq) {
@@ -431,8 +442,10 @@ void mthca_srq_event(struct mthca_dev *dev, u32 srqn,
 	srq->ibsrq.event_handler(&event, srq->ibsrq.srq_context);
 
 out:
-	if (atomic_dec_and_test(&srq->refcount))
+	spin_lock(&dev->srq_table.lock);
+	if (!--srq->refcount)
 		wake_up(&srq->wait);
+	spin_unlock(&dev->srq_table.lock);
 }
 
 /*
@@ -477,26 +490,7 @@ int mthca_tavor_post_srq_recv(struct ib_srq *ibsrq, struct ib_recv_wr *wr,
 
 	first_ind = srq->first_free;
 
-	for (nreq = 0; wr; ++nreq, wr = wr->next) {
-		if (unlikely(nreq == MTHCA_TAVOR_MAX_WQES_PER_RECV_DB)) {
-			nreq = 0;
-
-			doorbell[0] = cpu_to_be32(first_ind << srq->wqe_shift);
-			doorbell[1] = cpu_to_be32(srq->srqn << 8);
-
-			/*
-			 * Make sure that descriptors are written
-			 * before doorbell is rung.
-			 */
-			wmb();
-
-			mthca_write64(doorbell,
-				      dev->kar + MTHCA_RECEIVE_DOORBELL,
-				      MTHCA_GET_DOORBELL_LOCK(&dev->doorbell_lock));
-
-			first_ind = srq->first_free;
-		}
-
+	for (nreq = 0; wr; wr = wr->next) {
 		ind = srq->first_free;
 
 		if (ind < 0) {
@@ -556,6 +550,26 @@ int mthca_tavor_post_srq_recv(struct ib_srq *ibsrq, struct ib_recv_wr *wr,
 
 		srq->wrid[ind]  = wr->wr_id;
 		srq->first_free = next_ind;
+
+		++nreq;
+		if (unlikely(nreq == MTHCA_TAVOR_MAX_WQES_PER_RECV_DB)) {
+			nreq = 0;
+
+			doorbell[0] = cpu_to_be32(first_ind << srq->wqe_shift);
+			doorbell[1] = cpu_to_be32(srq->srqn << 8);
+
+			/*
+			 * Make sure that descriptors are written
+			 * before doorbell is rung.
+			 */
+			wmb();
+
+			mthca_write64(doorbell,
+				      dev->kar + MTHCA_RECEIVE_DOORBELL,
+				      MTHCA_GET_DOORBELL_LOCK(&dev->doorbell_lock));
+
+			first_ind = srq->first_free;
+		}
 	}
 
 	if (likely(nreq)) {
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_ib.c b/drivers/infiniband/ulp/ipoib/ipoib_ib.c
index a54da42849ae..8406839b91cf 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_ib.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_ib.c
@@ -275,6 +275,7 @@ static void ipoib_ib_handle_wc(struct net_device *dev,
 		spin_lock_irqsave(&priv->tx_lock, flags);
 		++priv->tx_tail;
 		if (netif_queue_stopped(dev) &&
+		    test_bit(IPOIB_FLAG_ADMIN_UP, &priv->flags) &&
 		    priv->tx_head - priv->tx_tail <= ipoib_sendq_size >> 1)
 			netif_wake_queue(dev);
 		spin_unlock_irqrestore(&priv->tx_lock, flags);
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_vlan.c b/drivers/infiniband/ulp/ipoib/ipoib_vlan.c
index 4ca175553f9f..f887780e8093 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_vlan.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_vlan.c
@@ -158,10 +158,8 @@ int ipoib_vlan_delete(struct net_device *pdev, unsigned short pkey)
 		if (priv->pkey == pkey) {
 			unregister_netdev(priv->dev);
 			ipoib_dev_cleanup(priv->dev);
-
 			list_del(&priv->list);
-
-			kfree(priv);
+			free_netdev(priv->dev);
 
 			ret = 0;
 			break;
diff --git a/drivers/infiniband/ulp/srp/ib_srp.c b/drivers/infiniband/ulp/srp/ib_srp.c
index 5f2b3f6e4c47..9cbdffa08dc2 100644
--- a/drivers/infiniband/ulp/srp/ib_srp.c
+++ b/drivers/infiniband/ulp/srp/ib_srp.c
@@ -340,7 +340,10 @@ static void srp_disconnect_target(struct srp_target_port *target)
 	/* XXX should send SRP_I_LOGOUT request */
 
 	init_completion(&target->done);
-	ib_send_cm_dreq(target->cm_id, NULL, 0);
+	if (ib_send_cm_dreq(target->cm_id, NULL, 0)) {
+		printk(KERN_DEBUG PFX "Sending CM DREQ failed\n");
+		return;
+	}
 	wait_for_completion(&target->done);
 }
 
@@ -351,7 +354,6 @@ static void srp_remove_work(void *target_ptr)
 	spin_lock_irq(target->scsi_host->host_lock);
 	if (target->state != SRP_TARGET_DEAD) {
 		spin_unlock_irq(target->scsi_host->host_lock);
-		scsi_host_put(target->scsi_host);
 		return;
 	}
 	target->state = SRP_TARGET_REMOVED;
@@ -365,8 +367,6 @@ static void srp_remove_work(void *target_ptr)
 	ib_destroy_cm_id(target->cm_id);
 	srp_free_target_ib(target);
 	scsi_host_put(target->scsi_host);
-	/* And another put to really free the target port... */
-	scsi_host_put(target->scsi_host);
 }
 
 static int srp_connect_target(struct srp_target_port *target)
@@ -409,6 +409,34 @@ static int srp_connect_target(struct srp_target_port *target)
 	}
 }
 
+static void srp_unmap_data(struct scsi_cmnd *scmnd,
+			   struct srp_target_port *target,
+			   struct srp_request *req)
+{
+	struct scatterlist *scat;
+	int nents;
+
+	if (!scmnd->request_buffer ||
+	    (scmnd->sc_data_direction != DMA_TO_DEVICE &&
+	     scmnd->sc_data_direction != DMA_FROM_DEVICE))
+		return;
+
+	/*
+	 * This handling of non-SG commands can be killed when the
+	 * SCSI midlayer no longer generates non-SG commands.
+	 */
+	if (likely(scmnd->use_sg)) {
+		nents = scmnd->use_sg;
+		scat  = scmnd->request_buffer;
+	} else {
+		nents = 1;
+		scat  = &req->fake_sg;
+	}
+
+	dma_unmap_sg(target->srp_host->dev->dma_device, scat, nents,
+		     scmnd->sc_data_direction);
+}
+
 static int srp_reconnect_target(struct srp_target_port *target)
 {
 	struct ib_cm_id *new_cm_id;
@@ -455,16 +483,16 @@ static int srp_reconnect_target(struct srp_target_port *target)
 	list_for_each_entry(req, &target->req_queue, list) {
 		req->scmnd->result = DID_RESET << 16;
 		req->scmnd->scsi_done(req->scmnd);
+		srp_unmap_data(req->scmnd, target, req);
 	}
 
 	target->rx_head	 = 0;
 	target->tx_head	 = 0;
 	target->tx_tail  = 0;
-	target->req_head = 0;
-	for (i = 0; i < SRP_SQ_SIZE - 1; ++i)
-		target->req_ring[i].next = i + 1;
-	target->req_ring[SRP_SQ_SIZE - 1].next = -1;
+	INIT_LIST_HEAD(&target->free_reqs);
 	INIT_LIST_HEAD(&target->req_queue);
+	for (i = 0; i < SRP_SQ_SIZE; ++i)
+		list_add_tail(&target->req_ring[i].list, &target->free_reqs);
 
 	ret = srp_connect_target(target);
 	if (ret)
@@ -589,32 +617,10 @@ static int srp_map_data(struct scsi_cmnd *scmnd, struct srp_target_port *target,
 	return len;
 }
 
-static void srp_unmap_data(struct scsi_cmnd *scmnd,
-			   struct srp_target_port *target,
-			   struct srp_request *req)
+static void srp_remove_req(struct srp_target_port *target, struct srp_request *req)
 {
-	struct scatterlist *scat;
-	int nents;
-
-	if (!scmnd->request_buffer ||
-	    (scmnd->sc_data_direction != DMA_TO_DEVICE &&
-	     scmnd->sc_data_direction != DMA_FROM_DEVICE))
-		return;
-
-	/*
-	 * This handling of non-SG commands can be killed when the
-	 * SCSI midlayer no longer generates non-SG commands.
-	 */
-	if (likely(scmnd->use_sg)) {
-		nents = scmnd->use_sg;
-		scat  = scmnd->request_buffer;
-	} else {
-		nents = 1;
-		scat  = &req->fake_sg;
-	}
-
-	dma_unmap_sg(target->srp_host->dev->dma_device, scat, nents,
-		     scmnd->sc_data_direction);
+	srp_unmap_data(req->scmnd, target, req);
+	list_move_tail(&req->list, &target->free_reqs);
 }
 
 static void srp_process_rsp(struct srp_target_port *target, struct srp_rsp *rsp)
@@ -639,7 +645,7 @@ static void srp_process_rsp(struct srp_target_port *target, struct srp_rsp *rsp)
 			req->tsk_status = rsp->data[3];
 		complete(&req->done);
 	} else {
-		scmnd 	      = req->scmnd;
+		scmnd = req->scmnd;
 		if (!scmnd)
 			printk(KERN_ERR "Null scmnd for RSP w/tag %016llx\n",
 			       (unsigned long long) rsp->tag);
@@ -657,16 +663,11 @@ static void srp_process_rsp(struct srp_target_port *target, struct srp_rsp *rsp)
 		else if (rsp->flags & (SRP_RSP_FLAG_DIOVER | SRP_RSP_FLAG_DIUNDER))
 			scmnd->resid = be32_to_cpu(rsp->data_in_res_cnt);
 
-		srp_unmap_data(scmnd, target, req);
-
 		if (!req->tsk_mgmt) {
-			req->scmnd = NULL;
 			scmnd->host_scribble = (void *) -1L;
 			scmnd->scsi_done(scmnd);
 
-			list_del(&req->list);
-			req->next = target->req_head;
-			target->req_head = rsp->tag & ~SRP_TAG_TSK_MGMT;
+			srp_remove_req(target, req);
 		} else
 			req->cmd_done = 1;
 	}
@@ -853,7 +854,6 @@ static int srp_queuecommand(struct scsi_cmnd *scmnd,
 	struct srp_request *req;
 	struct srp_iu *iu;
 	struct srp_cmd *cmd;
-	long req_index;
 	int len;
 
 	if (target->state == SRP_TARGET_CONNECTING)
@@ -873,22 +873,20 @@ static int srp_queuecommand(struct scsi_cmnd *scmnd,
 	dma_sync_single_for_cpu(target->srp_host->dev->dma_device, iu->dma,
 				SRP_MAX_IU_LEN, DMA_TO_DEVICE);
 
-	req_index = target->req_head;
+	req = list_entry(target->free_reqs.next, struct srp_request, list);
 
 	scmnd->scsi_done     = done;
 	scmnd->result        = 0;
-	scmnd->host_scribble = (void *) req_index;
+	scmnd->host_scribble = (void *) (long) req->index;
 
 	cmd = iu->buf;
 	memset(cmd, 0, sizeof *cmd);
 
 	cmd->opcode = SRP_CMD;
 	cmd->lun    = cpu_to_be64((u64) scmnd->device->lun << 48);
-	cmd->tag    = req_index;
+	cmd->tag    = req->index;
 	memcpy(cmd->cdb, scmnd->cmnd, scmnd->cmd_len);
 
-	req = &target->req_ring[req_index];
-
 	req->scmnd    = scmnd;
 	req->cmd      = iu;
 	req->cmd_done = 0;
@@ -913,8 +911,7 @@ static int srp_queuecommand(struct scsi_cmnd *scmnd,
 		goto err_unmap;
 	}
 
-	target->req_head = req->next;
-	list_add_tail(&req->list, &target->req_queue);
+	list_move_tail(&req->list, &target->req_queue);
 
 	return 0;
 
@@ -1137,30 +1134,20 @@ static int srp_cm_handler(struct ib_cm_id *cm_id, struct ib_cm_event *event)
 	return 0;
 }
 
-static int srp_send_tsk_mgmt(struct scsi_cmnd *scmnd, u8 func)
+static int srp_send_tsk_mgmt(struct srp_target_port *target,
+			     struct srp_request *req, u8 func)
 {
-	struct srp_target_port *target = host_to_target(scmnd->device->host);
-	struct srp_request *req;
 	struct srp_iu *iu;
 	struct srp_tsk_mgmt *tsk_mgmt;
-	int req_index;
-	int ret = FAILED;
 
 	spin_lock_irq(target->scsi_host->host_lock);
 
 	if (target->state == SRP_TARGET_DEAD ||
 	    target->state == SRP_TARGET_REMOVED) {
-		scmnd->result = DID_BAD_TARGET << 16;
+		req->scmnd->result = DID_BAD_TARGET << 16;
 		goto out;
 	}
 
-	if (scmnd->host_scribble == (void *) -1L)
-		goto out;
-
-	req_index = (long) scmnd->host_scribble;
-	printk(KERN_ERR "Abort for req_index %d\n", req_index);
-
-	req = &target->req_ring[req_index];
 	init_completion(&req->done);
 
 	iu = __srp_get_tx_iu(target);
@@ -1171,10 +1158,10 @@ static int srp_send_tsk_mgmt(struct scsi_cmnd *scmnd, u8 func)
 	memset(tsk_mgmt, 0, sizeof *tsk_mgmt);
 
 	tsk_mgmt->opcode 	= SRP_TSK_MGMT;
-	tsk_mgmt->lun 		= cpu_to_be64((u64) scmnd->device->lun << 48);
-	tsk_mgmt->tag 		= req_index | SRP_TAG_TSK_MGMT;
+	tsk_mgmt->lun 		= cpu_to_be64((u64) req->scmnd->device->lun << 48);
+	tsk_mgmt->tag 		= req->index | SRP_TAG_TSK_MGMT;
 	tsk_mgmt->tsk_mgmt_func = func;
-	tsk_mgmt->task_tag 	= req_index;
+	tsk_mgmt->task_tag 	= req->index;
 
 	if (__srp_post_send(target, iu, sizeof *tsk_mgmt))
 		goto out;
@@ -1182,39 +1169,85 @@ static int srp_send_tsk_mgmt(struct scsi_cmnd *scmnd, u8 func)
 	req->tsk_mgmt = iu;
 
 	spin_unlock_irq(target->scsi_host->host_lock);
+
 	if (!wait_for_completion_timeout(&req->done,
 					 msecs_to_jiffies(SRP_ABORT_TIMEOUT_MS)))
-		return FAILED;
-	spin_lock_irq(target->scsi_host->host_lock);
+		return -1;
 
-	if (req->cmd_done) {
-		list_del(&req->list);
-		req->next = target->req_head;
-		target->req_head = req_index;
-
-		scmnd->scsi_done(scmnd);
-	} else if (!req->tsk_status) {
-		scmnd->result = DID_ABORT << 16;
-		ret = SUCCESS;
-	}
+	return 0;
 
 out:
 	spin_unlock_irq(target->scsi_host->host_lock);
-	return ret;
+	return -1;
+}
+
+static int srp_find_req(struct srp_target_port *target,
+			struct scsi_cmnd *scmnd,
+			struct srp_request **req)
+{
+	if (scmnd->host_scribble == (void *) -1L)
+		return -1;
+
+	*req = &target->req_ring[(long) scmnd->host_scribble];
+
+	return 0;
 }
 
 static int srp_abort(struct scsi_cmnd *scmnd)
 {
+	struct srp_target_port *target = host_to_target(scmnd->device->host);
+	struct srp_request *req;
+	int ret = SUCCESS;
+
 	printk(KERN_ERR "SRP abort called\n");
 
-	return srp_send_tsk_mgmt(scmnd, SRP_TSK_ABORT_TASK);
+	if (srp_find_req(target, scmnd, &req))
+		return FAILED;
+	if (srp_send_tsk_mgmt(target, req, SRP_TSK_ABORT_TASK))
+		return FAILED;
+
+	spin_lock_irq(target->scsi_host->host_lock);
+
+	if (req->cmd_done) {
+		srp_remove_req(target, req);
+		scmnd->scsi_done(scmnd);
+	} else if (!req->tsk_status) {
+		srp_remove_req(target, req);
+		scmnd->result = DID_ABORT << 16;
+	} else
+		ret = FAILED;
+
+	spin_unlock_irq(target->scsi_host->host_lock);
+
+	return ret;
 }
 
 static int srp_reset_device(struct scsi_cmnd *scmnd)
 {
+	struct srp_target_port *target = host_to_target(scmnd->device->host);
+	struct srp_request *req, *tmp;
+
 	printk(KERN_ERR "SRP reset_device called\n");
 
-	return srp_send_tsk_mgmt(scmnd, SRP_TSK_LUN_RESET);
+	if (srp_find_req(target, scmnd, &req))
+		return FAILED;
+	if (srp_send_tsk_mgmt(target, req, SRP_TSK_LUN_RESET))
+		return FAILED;
+	if (req->tsk_status)
+		return FAILED;
+
+	spin_lock_irq(target->scsi_host->host_lock);
+
+	list_for_each_entry_safe(req, tmp, &target->req_queue, list)
+		if (req->scmnd->device == scmnd->device) {
+			req->scmnd->result = DID_RESET << 16;
+			req->scmnd->scsi_done(req->scmnd);
+			srp_remove_req(target, req);
+		}
+
+	spin_unlock_irq(target->scsi_host->host_lock);
+
+	return SUCCESS;
 }
 
 static int srp_reset_host(struct scsi_cmnd *scmnd)
@@ -1514,10 +1547,12 @@ static ssize_t srp_create_target(struct class_device *class_dev,
 
 	INIT_WORK(&target->work, srp_reconnect_work, target);
 
-	for (i = 0; i < SRP_SQ_SIZE - 1; ++i)
-		target->req_ring[i].next = i + 1;
-	target->req_ring[SRP_SQ_SIZE - 1].next = -1;
+	INIT_LIST_HEAD(&target->free_reqs);
 	INIT_LIST_HEAD(&target->req_queue);
+	for (i = 0; i < SRP_SQ_SIZE; ++i) {
+		target->req_ring[i].index = i;
+		list_add_tail(&target->req_ring[i].list, &target->free_reqs);
+	}
 
 	ret = srp_parse_options(buf, target);
 	if (ret)
diff --git a/drivers/infiniband/ulp/srp/ib_srp.h b/drivers/infiniband/ulp/srp/ib_srp.h
index bd7f7c3115de..c5cd43aae860 100644
--- a/drivers/infiniband/ulp/srp/ib_srp.h
+++ b/drivers/infiniband/ulp/srp/ib_srp.h
@@ -101,7 +101,7 @@ struct srp_request {
 	 */
 	struct scatterlist	fake_sg;
 	struct completion	done;
-	short			next;
+	short			index;
 	u8			cmd_done;
 	u8			tsk_status;
 };
@@ -133,7 +133,7 @@ struct srp_target_port {
 	unsigned		tx_tail;
 	struct srp_iu	       *tx_ring[SRP_SQ_SIZE + 1];
 
-	int			req_head;
+	struct list_head	free_reqs;
 	struct list_head	req_queue;
 	struct srp_request	req_ring[SRP_SQ_SIZE];
 
diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c
index a34e3d91d9ed..ba325f16d077 100644
--- a/drivers/input/evdev.c
+++ b/drivers/input/evdev.c
@@ -403,6 +403,27 @@ static long evdev_ioctl_handler(struct file *file, unsigned int cmd,
 		case EVIOCGID:
 			if (copy_to_user(p, &dev->id, sizeof(struct input_id)))
 				return -EFAULT;
+			return 0;
+
+		case EVIOCGREP:
+			if (!test_bit(EV_REP, dev->evbit))
+				return -ENOSYS;
+			if (put_user(dev->rep[REP_DELAY], ip))
+				return -EFAULT;
+			if (put_user(dev->rep[REP_PERIOD], ip + 1))
+				return -EFAULT;
+			return 0;
+
+		case EVIOCSREP:
+			if (!test_bit(EV_REP, dev->evbit))
+				return -ENOSYS;
+			if (get_user(u, ip))
+				return -EFAULT;
+			if (get_user(v, ip + 1))
+				return -EFAULT;
+
+			input_event(dev, EV_REP, REP_DELAY, u);
+			input_event(dev, EV_REP, REP_PERIOD, v);
 
 			return 0;
 
diff --git a/drivers/input/input.c b/drivers/input/input.c
index a935abeffffc..3038c268917d 100644
--- a/drivers/input/input.c
+++ b/drivers/input/input.c
@@ -155,6 +155,9 @@ void input_event(struct input_dev *dev, unsigned int type, unsigned int code, in
 			if (code > SND_MAX || !test_bit(code, dev->sndbit))
 				return;
 
+			if (!!test_bit(code, dev->snd) != !!value)
+				change_bit(code, dev->snd);
+
 			if (dev->event) dev->event(dev, type, code, value);
 
 			break;
@@ -286,19 +289,19 @@ static struct input_device_id *input_match_device(struct input_device_id *id, st
 	for (; id->flags || id->driver_info; id++) {
 
 		if (id->flags & INPUT_DEVICE_ID_MATCH_BUS)
-			if (id->id.bustype != dev->id.bustype)
+			if (id->bustype != dev->id.bustype)
 				continue;
 
 		if (id->flags & INPUT_DEVICE_ID_MATCH_VENDOR)
-			if (id->id.vendor != dev->id.vendor)
+			if (id->vendor != dev->id.vendor)
 				continue;
 
 		if (id->flags & INPUT_DEVICE_ID_MATCH_PRODUCT)
-			if (id->id.product != dev->id.product)
+			if (id->product != dev->id.product)
 				continue;
 
 		if (id->flags & INPUT_DEVICE_ID_MATCH_VERSION)
-			if (id->id.version != dev->id.version)
+			if (id->version != dev->id.version)
 				continue;
 
 		MATCH_BIT(evbit,  EV_MAX);
diff --git a/drivers/input/joystick/sidewinder.c b/drivers/input/joystick/sidewinder.c
index 2b2ec1057dee..95c0de7964a0 100644
--- a/drivers/input/joystick/sidewinder.c
+++ b/drivers/input/joystick/sidewinder.c
@@ -589,7 +589,7 @@ static int sw_connect(struct gameport *gameport, struct gameport_driver *drv)
 	struct sw *sw;
 	struct input_dev *input_dev;
 	int i, j, k, l;
-	int err;
+	int err = 0;
 	unsigned char *buf = NULL;	/* [SW_LENGTH] */
 	unsigned char *idbuf = NULL;	/* [SW_LENGTH] */
 	unsigned char m = 1;
@@ -776,7 +776,10 @@ static int sw_connect(struct gameport *gameport, struct gameport_driver *drv)
 			goto fail4;
 	}
 
-	return 0;
+ out:	kfree(buf);
+	kfree(idbuf);
+
+	return err;
 
  fail4:	input_free_device(sw->dev[i]);
  fail3:	while (--i >= 0)
@@ -784,9 +787,7 @@ static int sw_connect(struct gameport *gameport, struct gameport_driver *drv)
  fail2:	gameport_close(gameport);
  fail1:	gameport_set_drvdata(gameport, NULL);
 	kfree(sw);
-	kfree(buf);
-	kfree(idbuf);
-	return err;
+	goto out;
 }
 
 static void sw_disconnect(struct gameport *gameport)
diff --git a/drivers/input/keyboard/corgikbd.c b/drivers/input/keyboard/corgikbd.c
index 96c6bf77248a..1f0e720267d7 100644
--- a/drivers/input/keyboard/corgikbd.c
+++ b/drivers/input/keyboard/corgikbd.c
@@ -245,9 +245,9 @@ static void corgikbd_hinge_timer(unsigned long data)
 		if (hinge_count >= HINGE_STABLE_COUNT) {
 			spin_lock_irqsave(&corgikbd_data->lock, flags);
 
-			input_report_switch(corgikbd_data->input, SW_0, ((sharpsl_hinge_state & CORGI_SCP_SWA) != 0));
-			input_report_switch(corgikbd_data->input, SW_1, ((sharpsl_hinge_state & CORGI_SCP_SWB) != 0));
-			input_report_switch(corgikbd_data->input, SW_2, (READ_GPIO_BIT(CORGI_GPIO_AK_INT) != 0));
+			input_report_switch(corgikbd_data->input, SW_LID, ((sharpsl_hinge_state & CORGI_SCP_SWA) != 0));
+			input_report_switch(corgikbd_data->input, SW_TABLET_MODE, ((sharpsl_hinge_state & CORGI_SCP_SWB) != 0));
+			input_report_switch(corgikbd_data->input, SW_HEADPHONE_INSERT, (READ_GPIO_BIT(CORGI_GPIO_AK_INT) != 0));
 			input_sync(corgikbd_data->input);
 
 			spin_unlock_irqrestore(&corgikbd_data->lock, flags);
@@ -340,9 +340,9 @@ static int __init corgikbd_probe(struct platform_device *pdev)
 	for (i = 0; i < ARRAY_SIZE(corgikbd_keycode); i++)
 		set_bit(corgikbd->keycode[i], input_dev->keybit);
 	clear_bit(0, input_dev->keybit);
-	set_bit(SW_0, input_dev->swbit);
-	set_bit(SW_1, input_dev->swbit);
-	set_bit(SW_2, input_dev->swbit);
+	set_bit(SW_LID, input_dev->swbit);
+	set_bit(SW_TABLET_MODE, input_dev->swbit);
+	set_bit(SW_HEADPHONE_INSERT, input_dev->swbit);
 
 	input_register_device(corgikbd->input);
 
diff --git a/drivers/input/keyboard/hil_kbd.c b/drivers/input/keyboard/hil_kbd.c
index 1dca3cf42a54..2e4abdc26367 100644
--- a/drivers/input/keyboard/hil_kbd.c
+++ b/drivers/input/keyboard/hil_kbd.c
@@ -350,11 +350,11 @@ static int hil_kbd_connect(struct serio *serio, struct serio_driver *drv)
 	return 0;
  bail2:
 	serio_close(serio);
+	serio_set_drvdata(serio, NULL);
  bail1:
 	input_free_device(kbd->dev);
  bail0:
 	kfree(kbd);
-	serio_set_drvdata(serio, NULL);
 	return -EIO;
 }
 
diff --git a/drivers/input/keyboard/spitzkbd.c b/drivers/input/keyboard/spitzkbd.c
index bc61cf8cfc65..c5d03fb77bcb 100644
--- a/drivers/input/keyboard/spitzkbd.c
+++ b/drivers/input/keyboard/spitzkbd.c
@@ -53,8 +53,8 @@ static unsigned char spitzkbd_keycode[NR_SCANCODES] = {
 	KEY_LEFTCTRL, KEY_1, KEY_3, KEY_5, KEY_6, KEY_7, KEY_9, KEY_0, KEY_BACKSPACE, SPITZ_KEY_EXOK, SPITZ_KEY_EXCANCEL, 0, 0, 0, 0, 0,  /* 1-16 */
 	0, KEY_2, KEY_4, KEY_R, KEY_Y, KEY_8, KEY_I, KEY_O, KEY_P, SPITZ_KEY_EXJOGDOWN, SPITZ_KEY_EXJOGUP, 0, 0, 0, 0, 0, /* 17-32 */
 	KEY_TAB, KEY_Q, KEY_E, KEY_T, KEY_G, KEY_U, KEY_J, KEY_K, 0, 0, 0, 0, 0, 0, 0, 0,                                 /* 33-48 */
-	SPITZ_KEY_CALENDER, KEY_W, KEY_S, KEY_F, KEY_V, KEY_H, KEY_M, KEY_L, 0, KEY_RIGHTSHIFT, 0, 0, 0, 0, 0, 0,         /* 49-64 */
-	SPITZ_KEY_ADDRESS, KEY_A, KEY_D, KEY_C, KEY_B, KEY_N, KEY_DOT, 0, KEY_ENTER, KEY_LEFTSHIFT, 0, 0, 0, 0, 0, 0,	  /* 65-80 */
+	SPITZ_KEY_ADDRESS, KEY_W, KEY_S, KEY_F, KEY_V, KEY_H, KEY_M, KEY_L, 0, KEY_RIGHTSHIFT, 0, 0, 0, 0, 0, 0,         /* 49-64 */
+	SPITZ_KEY_CALENDER, KEY_A, KEY_D, KEY_C, KEY_B, KEY_N, KEY_DOT, 0, KEY_ENTER, KEY_LEFTSHIFT, 0, 0, 0, 0, 0, 0,	  /* 65-80 */
 	SPITZ_KEY_MAIL, KEY_Z, KEY_X, KEY_MINUS, KEY_SPACE, KEY_COMMA, 0, KEY_UP, 0, 0, SPITZ_KEY_FN, 0, 0, 0, 0, 0,      /* 81-96 */
 	KEY_SYSRQ, SPITZ_KEY_JAP1, SPITZ_KEY_JAP2, SPITZ_KEY_CANCEL, SPITZ_KEY_OK, SPITZ_KEY_MENU, KEY_LEFT, KEY_DOWN, KEY_RIGHT, 0, 0, 0, 0, 0, 0, 0  /* 97-112 */
 };
@@ -299,9 +299,9 @@ static void spitzkbd_hinge_timer(unsigned long data)
 	if (hinge_count >= HINGE_STABLE_COUNT) {
 		spin_lock_irqsave(&spitzkbd_data->lock, flags);
 
-		input_report_switch(spitzkbd_data->input, SW_0, ((GPLR(SPITZ_GPIO_SWA) & GPIO_bit(SPITZ_GPIO_SWA)) != 0));
-		input_report_switch(spitzkbd_data->input, SW_1, ((GPLR(SPITZ_GPIO_SWB) & GPIO_bit(SPITZ_GPIO_SWB)) != 0));
-		input_report_switch(spitzkbd_data->input, SW_2, ((GPLR(SPITZ_GPIO_AK_INT) & GPIO_bit(SPITZ_GPIO_AK_INT)) != 0));
+		input_report_switch(spitzkbd_data->input, SW_LID, ((GPLR(SPITZ_GPIO_SWA) & GPIO_bit(SPITZ_GPIO_SWA)) != 0));
+		input_report_switch(spitzkbd_data->input, SW_TABLET_MODE, ((GPLR(SPITZ_GPIO_SWB) & GPIO_bit(SPITZ_GPIO_SWB)) != 0));
+		input_report_switch(spitzkbd_data->input, SW_HEADPHONE_INSERT, ((GPLR(SPITZ_GPIO_AK_INT) & GPIO_bit(SPITZ_GPIO_AK_INT)) != 0));
 		input_sync(spitzkbd_data->input);
 
 		spin_unlock_irqrestore(&spitzkbd_data->lock, flags);
@@ -398,9 +398,9 @@ static int __init spitzkbd_probe(struct platform_device *dev)
 	for (i = 0; i < ARRAY_SIZE(spitzkbd_keycode); i++)
 		set_bit(spitzkbd->keycode[i], input_dev->keybit);
 	clear_bit(0, input_dev->keybit);
-	set_bit(SW_0, input_dev->swbit);
-	set_bit(SW_1, input_dev->swbit);
-	set_bit(SW_2, input_dev->swbit);
+	set_bit(SW_LID, input_dev->swbit);
+	set_bit(SW_TABLET_MODE, input_dev->swbit);
+	set_bit(SW_HEADPHONE_INSERT, input_dev->swbit);
 
 	input_register_device(input_dev);
 
diff --git a/drivers/input/misc/wistron_btns.c b/drivers/input/misc/wistron_btns.c
index 4b415d9b0123..e4e5be111c96 100644
--- a/drivers/input/misc/wistron_btns.c
+++ b/drivers/input/misc/wistron_btns.c
@@ -273,6 +273,18 @@ static struct key_entry keymap_fs_amilo_pro_v2000[] = {
 	{ KE_END,  0 }
 };
 
+static struct key_entry keymap_fujitsu_n3510[] = {
+	{ KE_KEY, 0x11, KEY_PROG1 },
+	{ KE_KEY, 0x12, KEY_PROG2 },
+	{ KE_KEY, 0x36, KEY_WWW },
+	{ KE_KEY, 0x31, KEY_MAIL },
+	{ KE_KEY, 0x71, KEY_STOPCD },
+	{ KE_KEY, 0x72, KEY_PLAYPAUSE },
+	{ KE_KEY, 0x74, KEY_REWIND },
+	{ KE_KEY, 0x78, KEY_FORWARD },
+	{ KE_END, 0 }
+};
+
 static struct key_entry keymap_wistron_ms2141[] = {
 	{ KE_KEY,  0x11, KEY_PROG1 },
 	{ KE_KEY,  0x12, KEY_PROG2 },
@@ -306,6 +318,16 @@ static struct key_entry keymap_acer_travelmate_240[] = {
 	{ KE_END, 0 }
 };
 
+static struct key_entry keymap_aopen_1559as[] = {
+	{ KE_KEY,  0x01, KEY_HELP },
+	{ KE_KEY,  0x06, KEY_PROG3 },
+	{ KE_KEY,  0x11, KEY_PROG1 },
+	{ KE_KEY,  0x12, KEY_PROG2 },
+	{ KE_WIFI, 0x30, 0 },
+	{ KE_KEY,  0x31, KEY_MAIL },
+	{ KE_KEY,  0x36, KEY_WWW },
+};
+
 /*
  * If your machine is not here (which is currently rather likely), please send
  * a list of buttons and their key codes (reported when loading this module
@@ -323,6 +345,24 @@ static struct dmi_system_id dmi_ids[] = {
 	},
 	{
 		.callback = dmi_matched,
+		.ident = "Fujitsu-Siemens Amilo M7400",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "AMILO M        "),
+		},
+		.driver_data = keymap_fs_amilo_pro_v2000
+	},
+	{
+		.callback = dmi_matched,
+		.ident = "Fujitsu N3510",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "N3510"),
+		},
+		.driver_data = keymap_fujitsu_n3510
+	},
+	{
+		.callback = dmi_matched,
 		.ident = "Acer Aspire 1500",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
@@ -339,6 +379,15 @@ static struct dmi_system_id dmi_ids[] = {
 		},
 		.driver_data = keymap_acer_travelmate_240
 	},
+        {
+		.callback = dmi_matched,
+		.ident = "AOpen 1559AS",
+		.matches = {
+			DMI_MATCH(DMI_PRODUCT_NAME, "E2U"),
+			DMI_MATCH(DMI_BOARD_NAME, "E2U"),
+		},
+		.driver_data = keymap_aopen_1559as
+	},
 	{ NULL, }
 };
 
diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c
index 2141501e9f2e..a0e2e797c6d5 100644
--- a/drivers/input/mouse/alps.c
+++ b/drivers/input/mouse/alps.c
@@ -100,8 +100,8 @@ static void alps_process_packet(struct psmouse *psmouse, struct pt_regs *regs)
 	}
 
 	if (priv->i->flags & ALPS_OLDPROTO) {
-		left = packet[2] & 0x08;
-		right = packet[2] & 0x10;
+		left = packet[2] & 0x10;
+		right = packet[2] & 0x08;
 		middle = 0;
 		x = packet[1] | ((packet[0] & 0x07) << 7);
 		y = packet[4] | ((packet[3] & 0x07) << 7);
diff --git a/drivers/input/mouse/lifebook.c b/drivers/input/mouse/lifebook.c
index 5ccc3ef3b89e..c14395ba7980 100644
--- a/drivers/input/mouse/lifebook.c
+++ b/drivers/input/mouse/lifebook.c
@@ -22,12 +22,36 @@
 
 static struct dmi_system_id lifebook_dmi_table[] = {
        {
+               .ident = "LifeBook B",
+               .matches = {
+                       DMI_MATCH(DMI_PRODUCT_NAME, "LifeBook B Series"),
+               },
+       },
+       {
                .ident = "Lifebook B",
                .matches = {
                        DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK B Series"),
                },
        },
        {
+               .ident = "Lifebook B213x/B2150",
+               .matches = {
+                       DMI_MATCH(DMI_PRODUCT_NAME, "LifeBook B2131/B2133/B2150"),
+               },
+       },
+       {
+               .ident = "Zephyr",
+               .matches = {
+                       DMI_MATCH(DMI_PRODUCT_NAME, "ZEPHYR"),
+               },
+       },
+       {
+               .ident = "CF-18",
+               .matches = {
+                       DMI_MATCH(DMI_PRODUCT_NAME, "CF-18"),
+               },
+       },
+       {
                .ident = "Lifebook B142",
                .matches = {
                        DMI_MATCH(DMI_PRODUCT_NAME, "LifeBook B142"),
diff --git a/drivers/input/mouse/logips2pp.c b/drivers/input/mouse/logips2pp.c
index 40333d61093c..2f0d28840810 100644
--- a/drivers/input/mouse/logips2pp.c
+++ b/drivers/input/mouse/logips2pp.c
@@ -19,6 +19,7 @@
 #define PS2PP_KIND_WHEEL	1
 #define PS2PP_KIND_MX		2
 #define PS2PP_KIND_TP3		3
+#define PS2PP_KIND_TRACKMAN	4
 
 /* Logitech mouse features */
 #define PS2PP_WHEEL		0x01
@@ -223,6 +224,7 @@ static struct ps2pp_info *get_model_info(unsigned char model)
 		{ 73,	0,			PS2PP_SIDE_BTN },
 		{ 75,	PS2PP_KIND_WHEEL,	PS2PP_WHEEL },
 		{ 76,	PS2PP_KIND_WHEEL,	PS2PP_WHEEL },
+		{ 79,	PS2PP_KIND_TRACKMAN,	PS2PP_WHEEL },		/* TrackMan with wheel */
 		{ 80,	PS2PP_KIND_WHEEL,	PS2PP_SIDE_BTN | PS2PP_WHEEL },
 		{ 81,	PS2PP_KIND_WHEEL,	PS2PP_WHEEL },
 		{ 83,	PS2PP_KIND_WHEEL,	PS2PP_WHEEL },
@@ -298,6 +300,10 @@ static void ps2pp_set_model_properties(struct psmouse *psmouse, struct ps2pp_inf
 			psmouse->name = "TouchPad 3";
 			break;
 
+		case PS2PP_KIND_TRACKMAN:
+			psmouse->name = "TrackMan";
+			break;
+
 		default:
 			/*
 			 * Set name to "Mouse" only when using PS2++,
diff --git a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c
index 32d70ed8f41d..136321a2cfdb 100644
--- a/drivers/input/mouse/psmouse-base.c
+++ b/drivers/input/mouse/psmouse-base.c
@@ -302,8 +302,10 @@ static irqreturn_t psmouse_interrupt(struct serio *serio,
  * Check if this is a new device announcement (0xAA 0x00)
  */
 	if (unlikely(psmouse->packet[0] == PSMOUSE_RET_BAT && psmouse->pktcnt <= 2)) {
-		if (psmouse->pktcnt == 1)
+		if (psmouse->pktcnt == 1) {
+			psmouse->last = jiffies;
 			goto out;
+		}
 
 		if (psmouse->packet[1] == PSMOUSE_RET_ID) {
 			__psmouse_set_state(psmouse, PSMOUSE_IGNORE);
diff --git a/drivers/input/serio/i8042-io.h b/drivers/input/serio/i8042-io.h
index 9a9221644250..cc21914fbc72 100644
--- a/drivers/input/serio/i8042-io.h
+++ b/drivers/input/serio/i8042-io.h
@@ -67,14 +67,14 @@ static inline int i8042_platform_init(void)
  * On some platforms touching the i8042 data register region can do really
  * bad things. Because of this the region is always reserved on such boxes.
  */
-#if !defined(__sh__) && !defined(__alpha__) && !defined(__mips__) && !defined(CONFIG_PPC64)
+#if !defined(__sh__) && !defined(__alpha__) && !defined(__mips__) && !defined(CONFIG_PPC_MERGE)
 	if (!request_region(I8042_DATA_REG, 16, "i8042"))
 		return -EBUSY;
 #endif
 
         i8042_reset = 1;
 
-#if defined(CONFIG_PPC64)
+#if defined(CONFIG_PPC_MERGE)
 	if (check_legacy_ioport(I8042_DATA_REG))
 		return -EBUSY;
 	if (!request_region(I8042_DATA_REG, 16, "i8042"))
diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
index 46d1fec2cfd8..161afddd0f44 100644
--- a/drivers/input/touchscreen/ads7846.c
+++ b/drivers/input/touchscreen/ads7846.c
@@ -2,6 +2,8 @@
  * ADS7846 based touchscreen and sensor driver
  *
  * Copyright (c) 2005 David Brownell
+ * Copyright (c) 2006 Nokia Corporation
+ * Various changes: Imre Deak <imre.deak@nokia.com>
  *
  * Using code from:
  *  - corgi_ts.c
@@ -34,17 +36,22 @@
 
 
 /*
- * This code has been lightly tested on an ads7846.
+ * This code has been heavily tested on a Nokia 770, and lightly
+ * tested on other ads7846 devices (OSK/Mistral, Lubbock).
  * Support for ads7843 and ads7845 has only been stubbed in.
  *
- * Not yet done:  investigate the values reported.  Are x/y/pressure
- * event values sane enough for X11?  How accurate are the temperature
- * and voltage readings?  (System-specific calibration should support
- * accuracy of 0.3 degrees C; otherwise it's 2.0 degrees.)
+ * IRQ handling needs a workaround because of a shortcoming in handling
+ * edge triggered IRQs on some platforms like the OMAP1/2. These
+ * platforms don't handle the ARM lazy IRQ disabling properly, thus we
+ * have to maintain our own SW IRQ disabled status. This should be
+ * removed as soon as the affected platform's IRQ handling is fixed.
  *
  * app note sbaa036 talks in more detail about accurate sampling...
  * that ought to help in situations like LCDs inducing noise (which
  * can also be helped by using synch signals) and more generally.
+ * This driver tries to utilize the measures described in the app
+ * note. The strength of filtering can be set in the board-* specific
+ * files.
  */
 
 #define	TS_POLL_PERIOD	msecs_to_jiffies(10)
@@ -61,6 +68,7 @@ struct ts_event {
 	__be16 x;
 	__be16 y;
 	__be16 z1, z2;
+	int    ignore;
 };
 
 struct ads7846 {
@@ -71,12 +79,23 @@ struct ads7846 {
 	u16			model;
 	u16			vref_delay_usecs;
 	u16			x_plate_ohms;
+	u16			pressure_max;
 
-	u8			read_x, read_y, read_z1, read_z2;
+	u8			read_x, read_y, read_z1, read_z2, pwrdown;
+	u16			dummy;		/* for the pwrdown read */
 	struct ts_event		tc;
 
-	struct spi_transfer	xfer[8];
-	struct spi_message	msg;
+	struct spi_transfer	xfer[10];
+	struct spi_message	msg[5];
+	struct spi_message	*last_msg;
+	int			msg_idx;
+	int			read_cnt;
+	int			read_rep;
+	int			last_read;
+
+	u16			debounce_max;
+	u16			debounce_tol;
+	u16			debounce_rep;
 
 	spinlock_t		lock;
 	struct timer_list	timer;		/* P: lock */
@@ -84,6 +103,9 @@ struct ads7846 {
 	unsigned		pending:1;	/* P: lock */
 // FIXME remove "irq_disabled"
 	unsigned		irq_disabled:1;	/* P: lock */
+	unsigned		disabled:1;
+
+	int			(*get_pendown_state)(void);
 };
 
 /* leave chip selected when we're done, for quicker re-select? */
@@ -125,7 +147,9 @@ struct ads7846 {
 #define	READ_Y	(READ_12BIT_DFR(y)  | ADS_PD10_ADC_ON)
 #define	READ_Z1	(READ_12BIT_DFR(z1) | ADS_PD10_ADC_ON)
 #define	READ_Z2	(READ_12BIT_DFR(z2) | ADS_PD10_ADC_ON)
-#define	READ_X	(READ_12BIT_DFR(x)  | ADS_PD10_PDOWN)	/* LAST */
+
+#define	READ_X	(READ_12BIT_DFR(x)  | ADS_PD10_ADC_ON)
+#define	PWRDOWN	(READ_12BIT_DFR(y)  | ADS_PD10_PDOWN)	/* LAST */
 
 /* single-ended samples need to first power up reference voltage;
  * we leave both ADC and VREF powered
@@ -152,6 +176,15 @@ struct ser_req {
 	struct spi_transfer	xfer[6];
 };
 
+static void ads7846_enable(struct ads7846 *ts);
+static void ads7846_disable(struct ads7846 *ts);
+
+static int device_suspended(struct device *dev)
+{
+	struct ads7846 *ts = dev_get_drvdata(dev);
+	return dev->power.power_state.event != PM_EVENT_ON || ts->disabled;
+}
+
 static int ads7846_read12_ser(struct device *dev, unsigned command)
 {
 	struct spi_device	*spi = to_spi_device(dev);
@@ -164,7 +197,7 @@ static int ads7846_read12_ser(struct device *dev, unsigned command)
 	if (!req)
 		return -ENOMEM;
 
-	INIT_LIST_HEAD(&req->msg.transfers);
+	spi_message_init(&req->msg);
 
 	/* activate reference, so it has time to settle; */
 	req->ref_on = REF_ON;
@@ -204,16 +237,21 @@ static int ads7846_read12_ser(struct device *dev, unsigned command)
 	for (i = 0; i < 6; i++)
 		spi_message_add_tail(&req->xfer[i], &req->msg);
 
+	ts->irq_disabled = 1;
 	disable_irq(spi->irq);
 	status = spi_sync(spi, &req->msg);
+	ts->irq_disabled = 0;
 	enable_irq(spi->irq);
 
 	if (req->msg.status)
 		status = req->msg.status;
+
+	/* on-wire is a must-ignore bit, a BE12 value, then padding */
 	sample = be16_to_cpu(req->sample);
-	sample = sample >> 4;
-	kfree(req);
+	sample = sample >> 3;
+	sample &= 0x0fff;
 
+	kfree(req);
 	return status ? status : sample;
 }
 
@@ -233,6 +271,52 @@ SHOW(temp1)
 SHOW(vaux)
 SHOW(vbatt)
 
+static int is_pen_down(struct device *dev)
+{
+	struct ads7846		*ts = dev_get_drvdata(dev);
+
+	return ts->pendown;
+}
+
+static ssize_t ads7846_pen_down_show(struct device *dev,
+				     struct device_attribute *attr, char *buf)
+{
+	return sprintf(buf, "%u\n", is_pen_down(dev));
+}
+
+static DEVICE_ATTR(pen_down, S_IRUGO, ads7846_pen_down_show, NULL);
+
+static ssize_t ads7846_disable_show(struct device *dev,
+				     struct device_attribute *attr, char *buf)
+{
+	struct ads7846	*ts = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%u\n", ts->disabled);
+}
+
+static ssize_t ads7846_disable_store(struct device *dev,
+				     struct device_attribute *attr,
+				     const char *buf, size_t count)
+{
+	struct ads7846 *ts = dev_get_drvdata(dev);
+	char *endp;
+	int i;
+
+	i = simple_strtoul(buf, &endp, 10);
+	spin_lock_irq(&ts->lock);
+
+	if (i)
+		ads7846_disable(ts);
+	else
+		ads7846_enable(ts);
+
+	spin_unlock_irq(&ts->lock);
+
+	return count;
+}
+
+static DEVICE_ATTR(disable, 0664, ads7846_disable_show, ads7846_disable_store);
+
 /*--------------------------------------------------------------------------*/
 
 /*
@@ -252,19 +336,19 @@ static void ads7846_rx(void *ads)
 	u16			x, y, z1, z2;
 	unsigned long		flags;
 
-	/* adjust:  12 bit samples (left aligned), built from
-	 * two 8 bit values writen msb-first.
+	/* adjust:  on-wire is a must-ignore bit, a BE12 value, then padding;
+	 * built from two 8 bit values written msb-first.
 	 */
-	x = be16_to_cpu(ts->tc.x) >> 4;
-	y = be16_to_cpu(ts->tc.y) >> 4;
-	z1 = be16_to_cpu(ts->tc.z1) >> 4;
-	z2 = be16_to_cpu(ts->tc.z2) >> 4;
+	x = (be16_to_cpu(ts->tc.x) >> 3) & 0x0fff;
+	y = (be16_to_cpu(ts->tc.y) >> 3) & 0x0fff;
+	z1 = (be16_to_cpu(ts->tc.z1) >> 3) & 0x0fff;
+	z2 = (be16_to_cpu(ts->tc.z2) >> 3) & 0x0fff;
 
 	/* range filtering */
 	if (x == MAX_12BIT)
 		x = 0;
 
-	if (x && z1 && ts->spi->dev.power.power_state.event == PM_EVENT_ON) {
+	if (likely(x && z1 && !device_suspended(&ts->spi->dev))) {
 		/* compute touch pressure resistance using equation #2 */
 		Rt = z2;
 		Rt -= z1;
@@ -275,6 +359,14 @@ static void ads7846_rx(void *ads)
 	} else
 		Rt = 0;
 
+	/* Sample found inconsistent by debouncing or pressure is beyond
+	* the maximum. Don't report it to user space, repeat at least
+	* once more the measurement */
+	if (ts->tc.ignore || Rt > ts->pressure_max) {
+		mod_timer(&ts->timer, jiffies + TS_POLL_PERIOD);
+		return;
+	}
+
 	/* NOTE:  "pendown" is inferred from pressure; we don't rely on
 	 * being able to check nPENIRQ status, or "friendly" trigger modes
 	 * (both-edges is much better than just-falling or low-level).
@@ -296,11 +388,13 @@ static void ads7846_rx(void *ads)
 	if (Rt) {
 		input_report_abs(input_dev, ABS_X, x);
 		input_report_abs(input_dev, ABS_Y, y);
-		input_report_abs(input_dev, ABS_PRESSURE, Rt);
 		sync = 1;
 	}
-	if (sync)
+
+	if (sync) {
+		input_report_abs(input_dev, ABS_PRESSURE, Rt);
 		input_sync(input_dev);
+	}
 
 #ifdef	VERBOSE
 	if (Rt || ts->pendown)
@@ -308,80 +402,137 @@ static void ads7846_rx(void *ads)
 			x, y, Rt, Rt ? "" : " UP");
 #endif
 
-	/* don't retrigger while we're suspended */
 	spin_lock_irqsave(&ts->lock, flags);
 
 	ts->pendown = (Rt != 0);
-	ts->pending = 0;
+	mod_timer(&ts->timer, jiffies + TS_POLL_PERIOD);
 
-	if (ts->spi->dev.power.power_state.event == PM_EVENT_ON) {
-		if (ts->pendown)
-			mod_timer(&ts->timer, jiffies + TS_POLL_PERIOD);
-		else if (ts->irq_disabled) {
-			ts->irq_disabled = 0;
-			enable_irq(ts->spi->irq);
+	spin_unlock_irqrestore(&ts->lock, flags);
+}
+
+static void ads7846_debounce(void *ads)
+{
+	struct ads7846		*ts = ads;
+	struct spi_message	*m;
+	struct spi_transfer	*t;
+	int			val;
+	int			status;
+
+	m = &ts->msg[ts->msg_idx];
+	t = list_entry(m->transfers.prev, struct spi_transfer, transfer_list);
+	val = (be16_to_cpu(*(__be16 *)t->rx_buf) >> 3) & 0x0fff;
+	if (!ts->read_cnt || (abs(ts->last_read - val) > ts->debounce_tol)) {
+		/* Repeat it, if this was the first read or the read
+		 * wasn't consistent enough. */
+		if (ts->read_cnt < ts->debounce_max) {
+			ts->last_read = val;
+			ts->read_cnt++;
+		} else {
+			/* Maximum number of debouncing reached and still
+			 * not enough number of consistent readings. Abort
+			 * the whole sample, repeat it in the next sampling
+			 * period.
+			 */
+			ts->tc.ignore = 1;
+			ts->read_cnt = 0;
+			/* Last message will contain ads7846_rx() as the
+			 * completion function.
+			 */
+			m = ts->last_msg;
 		}
+		/* Start over collecting consistent readings. */
+		ts->read_rep = 0;
+	} else {
+		if (++ts->read_rep > ts->debounce_rep) {
+			/* Got a good reading for this coordinate,
+			 * go for the next one. */
+			ts->tc.ignore = 0;
+			ts->msg_idx++;
+			ts->read_cnt = 0;
+			ts->read_rep = 0;
+			m++;
+		} else
+			/* Read more values that are consistent. */
+			ts->read_cnt++;
 	}
-
-	spin_unlock_irqrestore(&ts->lock, flags);
+	status = spi_async(ts->spi, m);
+	if (status)
+		dev_err(&ts->spi->dev, "spi_async --> %d\n",
+				status);
 }
 
 static void ads7846_timer(unsigned long handle)
 {
 	struct ads7846	*ts = (void *)handle;
 	int		status = 0;
-	unsigned long	flags;
+
+	spin_lock_irq(&ts->lock);
+
+	if (unlikely(ts->msg_idx && !ts->pendown)) {
+		/* measurement cycle ended */
+		if (!device_suspended(&ts->spi->dev)) {
+			ts->irq_disabled = 0;
+			enable_irq(ts->spi->irq);
+		}
+		ts->pending = 0;
+		ts->msg_idx = 0;
+	} else {
+		/* pen is still down, continue with the measurement */
+		ts->msg_idx = 0;
+		status = spi_async(ts->spi, &ts->msg[0]);
+		if (status)
+			dev_err(&ts->spi->dev, "spi_async --> %d\n", status);
+	}
+
+	spin_unlock_irq(&ts->lock);
+}
+
+static irqreturn_t ads7846_irq(int irq, void *handle, struct pt_regs *regs)
+{
+	struct ads7846 *ts = handle;
+	unsigned long flags;
 
 	spin_lock_irqsave(&ts->lock, flags);
-	if (!ts->pending) {
-		ts->pending = 1;
+	if (likely(ts->get_pendown_state())) {
 		if (!ts->irq_disabled) {
+			/* The ARM do_simple_IRQ() dispatcher doesn't act
+			 * like the other dispatchers:  it will report IRQs
+			 * even after they've been disabled.  We work around
+			 * that here.  (The "generic irq" framework may help...)
+			 */
 			ts->irq_disabled = 1;
 			disable_irq(ts->spi->irq);
+			ts->pending = 1;
+			mod_timer(&ts->timer, jiffies);
 		}
-		status = spi_async(ts->spi, &ts->msg);
-		if (status)
-			dev_err(&ts->spi->dev, "spi_async --> %d\n",
-					status);
 	}
 	spin_unlock_irqrestore(&ts->lock, flags);
-}
 
-static irqreturn_t ads7846_irq(int irq, void *handle, struct pt_regs *regs)
-{
-	ads7846_timer((unsigned long) handle);
 	return IRQ_HANDLED;
 }
 
 /*--------------------------------------------------------------------------*/
 
-static int
-ads7846_suspend(struct spi_device *spi, pm_message_t message)
+/* Must be called with ts->lock held */
+static void ads7846_disable(struct ads7846 *ts)
 {
-	struct ads7846 *ts = dev_get_drvdata(&spi->dev);
-	unsigned long	flags;
+	if (ts->disabled)
+		return;
 
-	spin_lock_irqsave(&ts->lock, flags);
-
-	spi->dev.power.power_state = message;
+	ts->disabled = 1;
 
 	/* are we waiting for IRQ, or polling? */
-	if (!ts->pendown) {
-		if (!ts->irq_disabled) {
-			ts->irq_disabled = 1;
-			disable_irq(ts->spi->irq);
-		}
+	if (!ts->pending) {
+		ts->irq_disabled = 1;
+		disable_irq(ts->spi->irq);
 	} else {
-		/* polling; force a final SPI completion;
-		 * that will clean things up neatly
+		/* the timer will run at least once more, and
+		 * leave everything in a clean state, IRQ disabled
 		 */
-		if (!ts->pending)
-			mod_timer(&ts->timer, jiffies);
-
-		while (ts->pendown || ts->pending) {
-			spin_unlock_irqrestore(&ts->lock, flags);
-			udelay(10);
-			spin_lock_irqsave(&ts->lock, flags);
+		while (ts->pending) {
+			spin_unlock_irq(&ts->lock);
+			msleep(1);
+			spin_lock_irq(&ts->lock);
 		}
 	}
 
@@ -389,17 +540,45 @@ ads7846_suspend(struct spi_device *spi, pm_message_t message)
 	 * leave it that way after every request
 	 */
 
-	spin_unlock_irqrestore(&ts->lock, flags);
+}
+
+/* Must be called with ts->lock held */
+static void ads7846_enable(struct ads7846 *ts)
+{
+	if (!ts->disabled)
+		return;
+
+	ts->disabled = 0;
+	ts->irq_disabled = 0;
+	enable_irq(ts->spi->irq);
+}
+
+static int ads7846_suspend(struct spi_device *spi, pm_message_t message)
+{
+	struct ads7846 *ts = dev_get_drvdata(&spi->dev);
+
+	spin_lock_irq(&ts->lock);
+
+	spi->dev.power.power_state = message;
+	ads7846_disable(ts);
+
+	spin_unlock_irq(&ts->lock);
+
 	return 0;
+
 }
 
 static int ads7846_resume(struct spi_device *spi)
 {
 	struct ads7846 *ts = dev_get_drvdata(&spi->dev);
 
-	ts->irq_disabled = 0;
-	enable_irq(ts->spi->irq);
+	spin_lock_irq(&ts->lock);
+
 	spi->dev.power.power_state = PMSG_ON;
+	ads7846_enable(ts);
+
+	spin_unlock_irq(&ts->lock);
+
 	return 0;
 }
 
@@ -408,6 +587,7 @@ static int __devinit ads7846_probe(struct spi_device *spi)
 	struct ads7846			*ts;
 	struct input_dev		*input_dev;
 	struct ads7846_platform_data	*pdata = spi->dev.platform_data;
+	struct spi_message		*m;
 	struct spi_transfer		*x;
 	int				err;
 
@@ -428,11 +608,20 @@ static int __devinit ads7846_probe(struct spi_device *spi)
 		return -EINVAL;
 	}
 
-	/* We'd set the wordsize to 12 bits ... except that some controllers
-	 * will then treat the 8 bit command words as 12 bits (and drop the
-	 * four MSBs of the 12 bit result).  Result: inputs must be shifted
-	 * to discard the four garbage LSBs.
+	/* REVISIT when the irq can be triggered active-low, or if for some
+	 * reason the touchscreen isn't hooked up, we don't need to access
+	 * the pendown state.
 	 */
+	if (pdata->get_pendown_state == NULL) {
+		dev_dbg(&spi->dev, "no get_pendown_state function?\n");
+		return -EINVAL;
+	}
+
+	/* We'd set TX wordsize 8 bits and RX wordsize to 13 bits ... except
+	 * that even if the hardware can do that, the SPI controller driver
+	 * may not.  So we stick to very-portable 8 bit words, both RX and TX.
+	 */
+	spi->bits_per_word = 8;
 
 	ts = kzalloc(sizeof(struct ads7846), GFP_KERNEL);
 	input_dev = input_allocate_device();
@@ -451,9 +640,21 @@ static int __devinit ads7846_probe(struct spi_device *spi)
 	ts->timer.data = (unsigned long) ts;
 	ts->timer.function = ads7846_timer;
 
+	spin_lock_init(&ts->lock);
+
 	ts->model = pdata->model ? : 7846;
 	ts->vref_delay_usecs = pdata->vref_delay_usecs ? : 100;
 	ts->x_plate_ohms = pdata->x_plate_ohms ? : 400;
+	ts->pressure_max = pdata->pressure_max ? : ~0;
+	if (pdata->debounce_max) {
+		ts->debounce_max = pdata->debounce_max;
+		ts->debounce_tol = pdata->debounce_tol;
+		ts->debounce_rep = pdata->debounce_rep;
+		if (ts->debounce_rep > ts->debounce_max + 1)
+			ts->debounce_rep = ts->debounce_max - 1;
+	} else
+		ts->debounce_tol = ~0;
+	ts->get_pendown_state = pdata->get_pendown_state;
 
 	snprintf(ts->phys, sizeof(ts->phys), "%s/input0", spi->dev.bus_id);
 
@@ -477,64 +678,104 @@ static int __devinit ads7846_probe(struct spi_device *spi)
 	/* set up the transfers to read touchscreen state; this assumes we
 	 * use formula #2 for pressure, not #3.
 	 */
-	INIT_LIST_HEAD(&ts->msg.transfers);
+	m = &ts->msg[0];
 	x = ts->xfer;
 
+	spi_message_init(m);
+
 	/* y- still on; turn on only y+ (and ADC) */
 	ts->read_y = READ_Y;
 	x->tx_buf = &ts->read_y;
 	x->len = 1;
-	spi_message_add_tail(x, &ts->msg);
+	spi_message_add_tail(x, m);
 
 	x++;
 	x->rx_buf = &ts->tc.y;
 	x->len = 2;
-	spi_message_add_tail(x, &ts->msg);
+	spi_message_add_tail(x, m);
+
+	m->complete = ads7846_debounce;
+	m->context = ts;
+
+	m++;
+	spi_message_init(m);
+
+	/* turn y- off, x+ on, then leave in lowpower */
+	x++;
+	ts->read_x = READ_X;
+	x->tx_buf = &ts->read_x;
+	x->len = 1;
+	spi_message_add_tail(x, m);
+
+	x++;
+	x->rx_buf = &ts->tc.x;
+	x->len = 2;
+	spi_message_add_tail(x, m);
+
+	m->complete = ads7846_debounce;
+	m->context = ts;
 
 	/* turn y+ off, x- on; we'll use formula #2 */
 	if (ts->model == 7846) {
+		m++;
+		spi_message_init(m);
+
 		x++;
 		ts->read_z1 = READ_Z1;
 		x->tx_buf = &ts->read_z1;
 		x->len = 1;
-		spi_message_add_tail(x, &ts->msg);
+		spi_message_add_tail(x, m);
 
 		x++;
 		x->rx_buf = &ts->tc.z1;
 		x->len = 2;
-		spi_message_add_tail(x, &ts->msg);
+		spi_message_add_tail(x, m);
+
+		m->complete = ads7846_debounce;
+		m->context = ts;
+
+		m++;
+		spi_message_init(m);
 
 		x++;
 		ts->read_z2 = READ_Z2;
 		x->tx_buf = &ts->read_z2;
 		x->len = 1;
-		spi_message_add_tail(x, &ts->msg);
+		spi_message_add_tail(x, m);
 
 		x++;
 		x->rx_buf = &ts->tc.z2;
 		x->len = 2;
-		spi_message_add_tail(x, &ts->msg);
+		spi_message_add_tail(x, m);
+
+		m->complete = ads7846_debounce;
+		m->context = ts;
 	}
 
-	/* turn y- off, x+ on, then leave in lowpower */
+	/* power down */
+	m++;
+	spi_message_init(m);
+
 	x++;
-	ts->read_x = READ_X;
-	x->tx_buf = &ts->read_x;
+	ts->pwrdown = PWRDOWN;
+	x->tx_buf = &ts->pwrdown;
 	x->len = 1;
-	spi_message_add_tail(x, &ts->msg);
+	spi_message_add_tail(x, m);
 
 	x++;
-	x->rx_buf = &ts->tc.x;
+	x->rx_buf = &ts->dummy;
 	x->len = 2;
 	CS_CHANGE(*x);
-	spi_message_add_tail(x, &ts->msg);
+	spi_message_add_tail(x, m);
+
+	m->complete = ads7846_rx;
+	m->context = ts;
 
-	ts->msg.complete = ads7846_rx;
-	ts->msg.context = ts;
+	ts->last_msg = m;
 
 	if (request_irq(spi->irq, ads7846_irq,
 			SA_SAMPLE_RANDOM | SA_TRIGGER_FALLING,
-			spi->dev.bus_id, ts)) {
+			spi->dev.driver->name, ts)) {
 		dev_dbg(&spi->dev, "irq %d busy?\n", spi->irq);
 		err = -EBUSY;
 		goto err_free_mem;
@@ -559,13 +800,27 @@ static int __devinit ads7846_probe(struct spi_device *spi)
 		device_create_file(&spi->dev, &dev_attr_vbatt);
 	device_create_file(&spi->dev, &dev_attr_vaux);
 
+	device_create_file(&spi->dev, &dev_attr_pen_down);
+
+	device_create_file(&spi->dev, &dev_attr_disable);
+
 	err = input_register_device(input_dev);
 	if (err)
-		goto err_free_irq;
+		goto err_remove_attr;
 
 	return 0;
 
- err_free_irq:
+ err_remove_attr:
+	device_remove_file(&spi->dev, &dev_attr_disable);
+	device_remove_file(&spi->dev, &dev_attr_pen_down);
+	if (ts->model == 7846) {
+		device_remove_file(&spi->dev, &dev_attr_temp1);
+		device_remove_file(&spi->dev, &dev_attr_temp0);
+	}
+	if (ts->model != 7845)
+		device_remove_file(&spi->dev, &dev_attr_vbatt);
+	device_remove_file(&spi->dev, &dev_attr_vaux);
+
 	free_irq(spi->irq, ts);
  err_free_mem:
 	input_free_device(input_dev);
@@ -577,20 +832,24 @@ static int __devexit ads7846_remove(struct spi_device *spi)
 {
 	struct ads7846		*ts = dev_get_drvdata(&spi->dev);
 
+	input_unregister_device(ts->input);
+
 	ads7846_suspend(spi, PMSG_SUSPEND);
-	free_irq(ts->spi->irq, ts);
-	if (ts->irq_disabled)
-		enable_irq(ts->spi->irq);
 
+	device_remove_file(&spi->dev, &dev_attr_disable);
+	device_remove_file(&spi->dev, &dev_attr_pen_down);
 	if (ts->model == 7846) {
-		device_remove_file(&spi->dev, &dev_attr_temp0);
 		device_remove_file(&spi->dev, &dev_attr_temp1);
+		device_remove_file(&spi->dev, &dev_attr_temp0);
 	}
 	if (ts->model != 7845)
 		device_remove_file(&spi->dev, &dev_attr_vbatt);
 	device_remove_file(&spi->dev, &dev_attr_vaux);
 
-	input_unregister_device(ts->input);
+	free_irq(ts->spi->irq, ts);
+	/* suspend left the IRQ disabled */
+	enable_irq(ts->spi->irq);
+
 	kfree(ts);
 
 	dev_dbg(&spi->dev, "unregistered touchscreen\n");
diff --git a/drivers/input/touchscreen/corgi_ts.c b/drivers/input/touchscreen/corgi_ts.c
index 1042987856f7..5013703db0e6 100644
--- a/drivers/input/touchscreen/corgi_ts.c
+++ b/drivers/input/touchscreen/corgi_ts.c
@@ -17,7 +17,7 @@
 #include <linux/interrupt.h>
 #include <linux/module.h>
 #include <linux/slab.h>
-#include <asm/irq.h>
+//#include <asm/irq.h>
 
 #include <asm/arch/sharpsl.h>
 #include <asm/arch/hardware.h>
diff --git a/drivers/isdn/capi/capi.c b/drivers/isdn/capi/capi.c
index 9b493f0becc4..173c899a1fb4 100644
--- a/drivers/isdn/capi/capi.c
+++ b/drivers/isdn/capi/capi.c
@@ -1499,7 +1499,6 @@ static int __init capi_init(void)
 		printk(KERN_ERR "capi20: unable to get major %d\n", capi_major);
 		return major_ret;
 	}
-	capi_major = major_ret;
 	capi_class = class_create(THIS_MODULE, "capi");
 	if (IS_ERR(capi_class)) {
 		unregister_chrdev(capi_major, "capi20");
diff --git a/drivers/isdn/gigaset/bas-gigaset.c b/drivers/isdn/gigaset/bas-gigaset.c
index f86ed6af3aa2..eb41aba3ddef 100644
--- a/drivers/isdn/gigaset/bas-gigaset.c
+++ b/drivers/isdn/gigaset/bas-gigaset.c
@@ -5,8 +5,6 @@
  *                       Tilman Schmidt <tilman@imap.cc>,
  *                       Stefan Eilers.
  *
- * Based on usb-gigaset.c.
- *
  * =====================================================================
  *	This program is free software; you can redistribute it and/or
  *	modify it under the terms of the GNU General Public License as
@@ -46,19 +44,20 @@ MODULE_PARM_DESC(cidmode, "Call-ID mode");
 #define GIGASET_DEVFSNAME  "gig/bas/"
 #define GIGASET_DEVNAME    "ttyGB"
 
-#define IF_WRITEBUF 256 //FIXME
+/* length limit according to Siemens 3070usb-protokoll.doc ch. 2.1 */
+#define IF_WRITEBUF 264
 
 /* Values for the Gigaset 307x */
 #define USB_GIGA_VENDOR_ID      0x0681
-#define USB_GIGA_PRODUCT_ID     0x0001
-#define USB_4175_PRODUCT_ID     0x0002
+#define USB_3070_PRODUCT_ID     0x0001
+#define USB_3075_PRODUCT_ID     0x0002
 #define USB_SX303_PRODUCT_ID    0x0021
 #define USB_SX353_PRODUCT_ID    0x0022
 
 /* table of devices that work with this driver */
 static struct usb_device_id gigaset_table [] = {
-	{ USB_DEVICE(USB_GIGA_VENDOR_ID, USB_GIGA_PRODUCT_ID) },
-	{ USB_DEVICE(USB_GIGA_VENDOR_ID, USB_4175_PRODUCT_ID) },
+	{ USB_DEVICE(USB_GIGA_VENDOR_ID, USB_3070_PRODUCT_ID) },
+	{ USB_DEVICE(USB_GIGA_VENDOR_ID, USB_3075_PRODUCT_ID) },
 	{ USB_DEVICE(USB_GIGA_VENDOR_ID, USB_SX303_PRODUCT_ID) },
 	{ USB_DEVICE(USB_GIGA_VENDOR_ID, USB_SX353_PRODUCT_ID) },
 	{ } /* Terminating entry */
@@ -77,6 +76,10 @@ static int gigaset_probe(struct usb_interface *interface,
 /* Function will be called if the device is unplugged */
 static void gigaset_disconnect(struct usb_interface *interface);
 
+static void read_ctrl_callback(struct urb *, struct pt_regs *);
+static void stopurbs(struct bas_bc_state *);
+static int atwrite_submit(struct cardstate *, unsigned char *, int);
+static int start_cbsend(struct cardstate *);
 
 /*==============================================================================*/
 
@@ -111,12 +114,14 @@ struct bas_cardstate {
 };
 
 /* status of direct USB connection to 307x base (bits in basstate) */
-#define BS_ATOPEN	0x001
-#define BS_B1OPEN	0x002
-#define BS_B2OPEN	0x004
-#define BS_ATREADY	0x008
-#define BS_INIT		0x010
-#define BS_ATTIMER	0x020
+#define BS_ATOPEN	0x001	/* AT channel open */
+#define BS_B1OPEN	0x002	/* B channel 1 open */
+#define BS_B2OPEN	0x004	/* B channel 2 open */
+#define BS_ATREADY	0x008	/* base ready for AT command */
+#define BS_INIT		0x010	/* base has signalled INIT_OK */
+#define BS_ATTIMER	0x020	/* waiting for HD_READY_SEND_ATDATA */
+#define BS_ATRDPEND	0x040	/* urb_cmd_in in use */
+#define BS_ATWRPEND	0x080	/* urb_cmd_out in use */
 
 
 static struct gigaset_driver *driver = NULL;
@@ -130,6 +135,47 @@ static struct usb_driver gigaset_usb_driver = {
 	.id_table =     gigaset_table,
 };
 
+/* get message text for usb_submit_urb return code
+ */
+static char *get_usb_rcmsg(int rc)
+{
+	static char unkmsg[28];
+
+	switch (rc) {
+	case 0:
+		return "success";
+	case -ENOMEM:
+		return "out of memory";
+	case -ENODEV:
+		return "device not present";
+	case -ENOENT:
+		return "endpoint not present";
+	case -ENXIO:
+		return "URB type not supported";
+	case -EINVAL:
+		return "invalid argument";
+	case -EAGAIN:
+		return "start frame too early or too much scheduled";
+	case -EFBIG:
+		return "too many isochronous frames requested";
+	case -EPIPE:
+		return "endpoint stalled";
+	case -EMSGSIZE:
+		return "invalid packet size";
+	case -ENOSPC:
+		return "would overcommit USB bandwidth";
+	case -ESHUTDOWN:
+		return "device shut down";
+	case -EPERM:
+		return "reject flag set";
+	case -EHOSTUNREACH:
+		return "device suspended";
+	default:
+		snprintf(unkmsg, sizeof(unkmsg), "unknown error %d", rc);
+		return unkmsg;
+	}
+}
+
 /* get message text for USB status code
  */
 static char *get_usb_statmsg(int status)
@@ -140,43 +186,37 @@ static char *get_usb_statmsg(int status)
 	case 0:
 		return "success";
 	case -ENOENT:
-		return "canceled";
-	case -ECONNRESET:
-		return "canceled (async)";
+		return "unlinked (sync)";
 	case -EINPROGRESS:
 		return "pending";
 	case -EPROTO:
-		return "bit stuffing or unknown USB error";
+		return "bit stuffing error, timeout, or unknown USB error";
 	case -EILSEQ:
-		return "Illegal byte sequence (CRC mismatch)";
-	case -EPIPE:
-		return "babble detect or endpoint stalled";
-	case -ENOSR:
-		return "buffer error";
+		return "CRC mismatch, timeout, or unknown USB error";
 	case -ETIMEDOUT:
 		return "timed out";
-	case -ENODEV:
-		return "device not present";
+	case -EPIPE:
+		return "endpoint stalled";
+	case -ECOMM:
+		return "IN buffer overrun";
+	case -ENOSR:
+		return "OUT buffer underrun";
+	case -EOVERFLOW:
+		return "too much data";
 	case -EREMOTEIO:
 		return "short packet detected";
+	case -ENODEV:
+		return "device removed";
 	case -EXDEV:
 		return "partial isochronous transfer";
 	case -EINVAL:
 		return "invalid argument";
-	case -ENXIO:
-		return "URB already queued";
-	case -EAGAIN:
-		return "isochronous start frame too early or too much scheduled";
-	case -EFBIG:
-		return "too many isochronous frames requested";
-	case -EMSGSIZE:
-		return "endpoint message size zero";
+	case -ECONNRESET:
+		return "unlinked (async)";
 	case -ESHUTDOWN:
-		return "endpoint shutdown";
-	case -EBUSY:
-		return "another request pending";
+		return "device shut down";
 	default:
-		snprintf(unkmsg, sizeof(unkmsg), "unknown error %d", status);
+		snprintf(unkmsg, sizeof(unkmsg), "unknown status %d", status);
 		return unkmsg;
 	}
 }
@@ -277,18 +317,17 @@ static inline void error_hangup(struct bc_state *bcs)
 	gig_dbg(DEBUG_ANY, "%s: scheduling HUP for channel %d",
 		__func__, bcs->channel);
 
-	if (!gigaset_add_event(cs, &bcs->at_state, EV_HUP, NULL, 0, NULL)) {
-		//FIXME what should we do?
-		return;
-	}
+	if (!gigaset_add_event(cs, &bcs->at_state, EV_HUP, NULL, 0, NULL))
+		dev_err(cs->dev, "event queue full\n");
 
 	gigaset_schedule_event(cs);
 }
 
 /* error_reset
  * reset Gigaset device because of an unrecoverable error
- * This function may be called from any context and takes care of scheduling
- * the necessary actions for execution outside of interrupt context.
+ * This function may be called from any context, and should take care of
+ * scheduling the necessary actions for execution outside of interrupt context.
+ * Right now, it just generates a kernel message calling for help.
  * argument:
  *	controller state structure
  */
@@ -364,36 +403,38 @@ static void cmd_in_timeout(unsigned long data)
 {
 	struct cardstate *cs = (struct cardstate *) data;
 	struct bas_cardstate *ucs = cs->hw.bas;
-	unsigned long flags;
 
-	spin_lock_irqsave(&cs->lock, flags);
-	if (unlikely(!cs->connected)) {
-		gig_dbg(DEBUG_USBREQ, "%s: disconnected", __func__);
-		spin_unlock_irqrestore(&cs->lock, flags);
-		return;
-	}
 	if (!ucs->rcvbuf_size) {
 		gig_dbg(DEBUG_USBREQ, "%s: no receive in progress", __func__);
-		spin_unlock_irqrestore(&cs->lock, flags);
 		return;
 	}
-	spin_unlock_irqrestore(&cs->lock, flags);
 
 	dev_err(cs->dev, "timeout reading AT response\n");
 	error_reset(cs);	//FIXME retry?
 }
 
+/* set/clear bits in base connection state, return previous state
+ */
+inline static int update_basstate(struct bas_cardstate *ucs,
+				  int set, int clear)
+{
+	unsigned long flags;
+	int state;
 
-static void read_ctrl_callback(struct urb *urb, struct pt_regs *regs);
+	spin_lock_irqsave(&ucs->lock, flags);
+	state = atomic_read(&ucs->basstate);
+	atomic_set(&ucs->basstate, (state & ~clear) | set);
+	spin_unlock_irqrestore(&ucs->lock, flags);
+	return state;
+}
 
 /* atread_submit
- * submit an HD_READ_ATMESSAGE command URB
+ * submit an HD_READ_ATMESSAGE command URB and optionally start a timeout
  * parameters:
  *	cs	controller state structure
  *	timeout	timeout in 1/10 sec., 0: none
  * return value:
  *	0 on success
- *	-EINVAL if a NULL pointer is encountered somewhere
  *	-EBUSY if another request is pending
  *	any URB submission error code
  */
@@ -405,7 +446,7 @@ static int atread_submit(struct cardstate *cs, int timeout)
 	gig_dbg(DEBUG_USBREQ, "-------> HD_READ_ATMESSAGE (%d)",
 		ucs->rcvbuf_size);
 
-	if (ucs->urb_cmd_in->status == -EINPROGRESS) {
+	if (update_basstate(ucs, BS_ATRDPEND, 0) & BS_ATRDPEND) {
 		dev_err(cs->dev,
 			"could not submit HD_READ_ATMESSAGE: URB busy\n");
 		return -EBUSY;
@@ -423,6 +464,7 @@ static int atread_submit(struct cardstate *cs, int timeout)
 			     read_ctrl_callback, cs->inbuf);
 
 	if ((ret = usb_submit_urb(ucs->urb_cmd_in, SLAB_ATOMIC)) != 0) {
+		update_basstate(ucs, 0, BS_ATRDPEND);
 		dev_err(cs->dev, "could not submit HD_READ_ATMESSAGE: %s\n",
 			get_usb_statmsg(ret));
 		return ret;
@@ -438,26 +480,6 @@ static int atread_submit(struct cardstate *cs, int timeout)
 	return 0;
 }
 
-static void stopurbs(struct bas_bc_state *);
-static int start_cbsend(struct cardstate *);
-
-/* set/clear bits in base connection state
- */
-inline static void update_basstate(struct bas_cardstate *ucs,
-				   int set, int clear)
-{
-	unsigned long flags;
-	int state;
-
-	spin_lock_irqsave(&ucs->lock, flags);
-	state = atomic_read(&ucs->basstate);
-	state &= ~clear;
-	state |= set;
-	atomic_set(&ucs->basstate, state);
-	spin_unlock_irqrestore(&ucs->lock, flags);
-}
-
-
 /* read_int_callback
  * USB completion handler for interrupt pipe input
  * called by the USB subsystem in interrupt context
@@ -471,20 +493,25 @@ static void read_int_callback(struct urb *urb, struct pt_regs *regs)
 	struct bas_cardstate *ucs = cs->hw.bas;
 	struct bc_state *bcs;
 	unsigned long flags;
-	int status;
+	int rc;
 	unsigned l;
 	int channel;
 
 	switch (urb->status) {
 	case 0:			/* success */
 		break;
-	case -ENOENT:			/* canceled */
-	case -ECONNRESET:		/* canceled (async) */
+	case -ENOENT:			/* cancelled */
+	case -ECONNRESET:		/* cancelled (async) */
 	case -EINPROGRESS:		/* pending */
 		/* ignore silently */
 		gig_dbg(DEBUG_USBREQ, "%s: %s",
 			__func__, get_usb_statmsg(urb->status));
 		return;
+	case -ENODEV:			/* device removed */
+	case -ESHUTDOWN:		/* device shut down */
+		//FIXME use this as disconnect indicator?
+		gig_dbg(DEBUG_USBREQ, "%s: device disconnected", __func__);
+		return;
 	default:		/* severe trouble */
 		dev_warn(cs->dev, "interrupt read: %s\n",
 			 get_usb_statmsg(urb->status));
@@ -492,6 +519,13 @@ static void read_int_callback(struct urb *urb, struct pt_regs *regs)
 		goto resubmit;
 	}
 
+	/* drop incomplete packets even if the missing bytes wouldn't matter */
+	if (unlikely(urb->actual_length < 3)) {
+		dev_warn(cs->dev, "incomplete interrupt packet (%d bytes)\n",
+			 urb->actual_length);
+		goto resubmit;
+	}
+
 	l = (unsigned) ucs->int_in_buf[1] +
 	    (((unsigned) ucs->int_in_buf[2]) << 8);
 
@@ -558,25 +592,28 @@ static void read_int_callback(struct urb *urb, struct pt_regs *regs)
 		}
 		spin_lock_irqsave(&cs->lock, flags);
 		if (ucs->rcvbuf_size) {
-			spin_unlock_irqrestore(&cs->lock, flags);
+			/* throw away previous buffer - we have no queue */
 			dev_err(cs->dev,
-				"receive AT data overrun, %d bytes lost\n", l);
-			error_reset(cs);	//FIXME reschedule
-			break;
+				"receive AT data overrun, %d bytes lost\n",
+				ucs->rcvbuf_size);
+			kfree(ucs->rcvbuf);
+			ucs->rcvbuf_size = 0;
 		}
 		if ((ucs->rcvbuf = kmalloc(l, GFP_ATOMIC)) == NULL) {
 			spin_unlock_irqrestore(&cs->lock, flags);
-			dev_err(cs->dev, "out of memory, %d bytes lost\n", l);
-			error_reset(cs);	//FIXME reschedule
+			dev_err(cs->dev, "out of memory receiving AT data\n");
+			error_reset(cs);
 			break;
 		}
 		ucs->rcvbuf_size = l;
 		ucs->retry_cmd_in = 0;
-		if ((status = atread_submit(cs, BAS_TIMEOUT)) < 0) {
+		if ((rc = atread_submit(cs, BAS_TIMEOUT)) < 0) {
 			kfree(ucs->rcvbuf);
 			ucs->rcvbuf = NULL;
 			ucs->rcvbuf_size = 0;
-			error_reset(cs);	//FIXME reschedule
+			if (rc != -ENODEV)
+				//FIXME corrective action?
+				error_reset(cs);
 		}
 		spin_unlock_irqrestore(&cs->lock, flags);
 		break;
@@ -598,12 +635,10 @@ static void read_int_callback(struct urb *urb, struct pt_regs *regs)
 	check_pending(ucs);
 
 resubmit:
-	spin_lock_irqsave(&cs->lock, flags);
-	status = cs->connected ? usb_submit_urb(urb, SLAB_ATOMIC) : -ENODEV;
-	spin_unlock_irqrestore(&cs->lock, flags);
-	if (unlikely(status)) {
+	rc = usb_submit_urb(urb, SLAB_ATOMIC);
+	if (unlikely(rc != 0 && rc != -ENODEV)) {
 		dev_err(cs->dev, "could not resubmit interrupt URB: %s\n",
-			get_usb_statmsg(status));
+			get_usb_rcmsg(rc));
 		error_reset(cs);
 	}
 }
@@ -622,18 +657,12 @@ static void read_ctrl_callback(struct urb *urb, struct pt_regs *regs)
 	struct bas_cardstate *ucs = cs->hw.bas;
 	int have_data = 0;
 	unsigned numbytes;
-	unsigned long flags;
+	int rc;
 
-	spin_lock_irqsave(&cs->lock, flags);
-	if (unlikely(!cs->connected)) {
-		warn("%s: disconnected", __func__);
-		spin_unlock_irqrestore(&cs->lock, flags);
-		return;
-	}
+	update_basstate(ucs, 0, BS_ATRDPEND);
 
 	if (!ucs->rcvbuf_size) {
 		dev_warn(cs->dev, "%s: no receive in progress\n", __func__);
-		spin_unlock_irqrestore(&cs->lock, flags);
 		return;
 	}
 
@@ -666,9 +695,11 @@ static void read_ctrl_callback(struct urb *urb, struct pt_regs *regs)
 		}
 		break;
 
-	case -ENOENT:			/* canceled */
-	case -ECONNRESET:		/* canceled (async) */
+	case -ENOENT:			/* cancelled */
+	case -ECONNRESET:		/* cancelled (async) */
 	case -EINPROGRESS:		/* pending */
+	case -ENODEV:			/* device removed */
+	case -ESHUTDOWN:		/* device shut down */
 		/* no action necessary */
 		gig_dbg(DEBUG_USBREQ, "%s: %s",
 			__func__, get_usb_statmsg(urb->status));
@@ -681,11 +712,11 @@ static void read_ctrl_callback(struct urb *urb, struct pt_regs *regs)
 		if (ucs->retry_cmd_in++ < BAS_RETRY) {
 			dev_notice(cs->dev, "control read: retry %d\n",
 				   ucs->retry_cmd_in);
-			if (atread_submit(cs, BAS_TIMEOUT) >= 0) {
-				/* resubmitted - bypass regular exit block */
-				spin_unlock_irqrestore(&cs->lock, flags);
+			rc = atread_submit(cs, BAS_TIMEOUT);
+			if (rc >= 0 || rc == -ENODEV)
+				/* resubmitted or disconnected */
+				/* - bypass regular exit block */
 				return;
-			}
 		} else {
 			dev_err(cs->dev,
 				"control read: giving up after %d tries\n",
@@ -697,7 +728,6 @@ static void read_ctrl_callback(struct urb *urb, struct pt_regs *regs)
 	kfree(ucs->rcvbuf);
 	ucs->rcvbuf = NULL;
 	ucs->rcvbuf_size = 0;
-	spin_unlock_irqrestore(&cs->lock, flags);
 	if (have_data) {
 		gig_dbg(DEBUG_INTR, "%s-->BH", __func__);
 		gigaset_schedule_event(cs);
@@ -719,8 +749,11 @@ static void read_iso_callback(struct urb *urb, struct pt_regs *regs)
 	int i, rc;
 
 	/* status codes not worth bothering the tasklet with */
-	if (unlikely(urb->status == -ENOENT || urb->status == -ECONNRESET ||
-		     urb->status == -EINPROGRESS)) {
+	if (unlikely(urb->status == -ENOENT ||
+		     urb->status == -ECONNRESET ||
+		     urb->status == -EINPROGRESS ||
+		     urb->status == -ENODEV ||
+		     urb->status == -ESHUTDOWN)) {
 		gig_dbg(DEBUG_ISO, "%s: %s",
 			__func__, get_usb_statmsg(urb->status));
 		return;
@@ -740,9 +773,9 @@ static void read_iso_callback(struct urb *urb, struct pt_regs *regs)
 		for (i = 0; i < BAS_NUMFRAMES; i++) {
 			ubc->isoinlost += urb->iso_frame_desc[i].actual_length;
 			if (unlikely(urb->iso_frame_desc[i].status != 0 &&
-				     urb->iso_frame_desc[i].status != -EINPROGRESS)) {
+				     urb->iso_frame_desc[i].status !=
+								-EINPROGRESS))
 				ubc->loststatus = urb->iso_frame_desc[i].status;
-			}
 			urb->iso_frame_desc[i].status = 0;
 			urb->iso_frame_desc[i].actual_length = 0;
 		}
@@ -754,10 +787,10 @@ static void read_iso_callback(struct urb *urb, struct pt_regs *regs)
 			gig_dbg(DEBUG_ISO, "%s: isoc read overrun/resubmit",
 				__func__);
 			rc = usb_submit_urb(urb, SLAB_ATOMIC);
-			if (unlikely(rc != 0)) {
+			if (unlikely(rc != 0 && rc != -ENODEV)) {
 				dev_err(bcs->cs->dev,
 					"could not resubmit isochronous read "
-					"URB: %s\n", get_usb_statmsg(rc));
+					"URB: %s\n", get_usb_rcmsg(rc));
 				dump_urb(DEBUG_ISO, "isoc read", urb);
 				error_hangup(bcs);
 			}
@@ -780,8 +813,11 @@ static void write_iso_callback(struct urb *urb, struct pt_regs *regs)
 	unsigned long flags;
 
 	/* status codes not worth bothering the tasklet with */
-	if (unlikely(urb->status == -ENOENT || urb->status == -ECONNRESET ||
-		     urb->status == -EINPROGRESS)) {
+	if (unlikely(urb->status == -ENOENT ||
+		     urb->status == -ECONNRESET ||
+		     urb->status == -EINPROGRESS ||
+		     urb->status == -ENODEV ||
+		     urb->status == -ESHUTDOWN)) {
 		gig_dbg(DEBUG_ISO, "%s: %s",
 			__func__, get_usb_statmsg(urb->status));
 		return;
@@ -822,7 +858,6 @@ static int starturbs(struct bc_state *bcs)
 	for (k = 0; k < BAS_INURBS; k++) {
 		urb = ubc->isoinurbs[k];
 		if (!urb) {
-			dev_err(bcs->cs->dev, "isoinurbs[%d]==NULL\n", k);
 			rc = -EFAULT;
 			goto error;
 		}
@@ -844,12 +879,8 @@ static int starturbs(struct bc_state *bcs)
 		}
 
 		dump_urb(DEBUG_ISO, "Initial isoc read", urb);
-		if ((rc = usb_submit_urb(urb, SLAB_ATOMIC)) != 0) {
-			dev_err(bcs->cs->dev,
-			       "could not submit isochronous read URB %d: %s\n",
-				k, get_usb_statmsg(rc));
+		if ((rc = usb_submit_urb(urb, SLAB_ATOMIC)) != 0)
 			goto error;
-		}
 	}
 
 	/* initialize L2 transmission */
@@ -859,7 +890,6 @@ static int starturbs(struct bc_state *bcs)
 	for (k = 0; k < BAS_OUTURBS; ++k) {
 		urb = ubc->isoouturbs[k].urb;
 		if (!urb) {
-			dev_err(bcs->cs->dev, "isoouturbs[%d].urb==NULL\n", k);
 			rc = -EFAULT;
 			goto error;
 		}
@@ -885,12 +915,8 @@ static int starturbs(struct bc_state *bcs)
 	for (k = 0; k < 2; ++k) {
 		dump_urb(DEBUG_ISO, "Initial isoc write", urb);
 		rc = usb_submit_urb(ubc->isoouturbs[k].urb, SLAB_ATOMIC);
-		if (rc != 0) {
-			dev_err(bcs->cs->dev,
-			      "could not submit isochronous write URB %d: %s\n",
-				k, get_usb_statmsg(rc));
+		if (rc != 0)
 			goto error;
-		}
 	}
 	dump_urb(DEBUG_ISO, "Initial isoc write (free)", urb);
 	ubc->isooutfree = &ubc->isoouturbs[2];
@@ -916,15 +942,15 @@ static void stopurbs(struct bas_bc_state *ubc)
 	for (k = 0; k < BAS_INURBS; ++k) {
 		rc = usb_unlink_urb(ubc->isoinurbs[k]);
 		gig_dbg(DEBUG_ISO,
-			"%s: isoc input URB %d unlinked, result = %d",
-			__func__, k, rc);
+			"%s: isoc input URB %d unlinked, result = %s",
+			__func__, k, get_usb_rcmsg(rc));
 	}
 
 	for (k = 0; k < BAS_OUTURBS; ++k) {
 		rc = usb_unlink_urb(ubc->isoouturbs[k].urb);
 		gig_dbg(DEBUG_ISO,
-			"%s: isoc output URB %d unlinked, result = %d",
-			__func__, k, rc);
+			"%s: isoc output URB %d unlinked, result = %s",
+			__func__, k, get_usb_rcmsg(rc));
 	}
 }
 
@@ -934,7 +960,7 @@ static void stopurbs(struct bas_bc_state *ubc)
 /* submit_iso_write_urb
  * fill and submit the next isochronous write URB
  * parameters:
- *	bcs	B channel state structure
+ *	ucx	context structure containing URB
  * return value:
  *	number of frames submitted in URB
  *	0 if URB not submitted because no data available (isooutbuf busy)
@@ -946,7 +972,6 @@ static int submit_iso_write_urb(struct isow_urbctx_t *ucx)
 	struct bas_bc_state *ubc = ucx->bcs->hw.bas;
 	struct usb_iso_packet_descriptor *ifd;
 	int corrbytes, nframe, rc;
-	unsigned long flags;
 
 	/* urb->dev is clobbered by USB subsystem */
 	urb->dev = ucx->bcs->cs->hw.bas->udev;
@@ -992,20 +1017,22 @@ static int submit_iso_write_urb(struct isow_urbctx_t *ucx)
 		ifd->status = 0;
 		ifd->actual_length = 0;
 	}
-	if ((urb->number_of_packets = nframe) > 0) {
-		spin_lock_irqsave(&ucx->bcs->cs->lock, flags);
-		rc = ucx->bcs->cs->connected ? usb_submit_urb(urb, SLAB_ATOMIC) : -ENODEV;
-		spin_unlock_irqrestore(&ucx->bcs->cs->lock, flags);
+	if (unlikely(nframe == 0))
+		return 0;	/* no data to send */
+	urb->number_of_packets = nframe;
 
-		if (rc) {
+	rc = usb_submit_urb(urb, SLAB_ATOMIC);
+	if (unlikely(rc)) {
+		if (rc == -ENODEV)
+			/* device removed - give up silently */
+			gig_dbg(DEBUG_ISO, "%s: disconnected", __func__);
+		else
 			dev_err(ucx->bcs->cs->dev,
 				"could not submit isochronous write URB: %s\n",
-				get_usb_statmsg(rc));
-			dump_urb(DEBUG_ISO, "isoc write", urb);
-			return rc;
-		}
-		++ubc->numsub;
+				get_usb_rcmsg(rc));
+		return rc;
 	}
+	++ubc->numsub;
 	return nframe;
 }
 
@@ -1028,6 +1055,7 @@ static void write_iso_tasklet(unsigned long data)
 	int i;
 	struct sk_buff *skb;
 	int len;
+	int rc;
 
 	/* loop while completed URBs arrive in time */
 	for (;;) {
@@ -1057,7 +1085,8 @@ static void write_iso_tasklet(unsigned long data)
 		ubc->isooutfree = NULL;
 		spin_unlock_irqrestore(&ubc->isooutlock, flags);
 		if (next) {
-			if (submit_iso_write_urb(next) <= 0) {
+			rc = submit_iso_write_urb(next);
+			if (unlikely(rc <= 0 && rc != -ENODEV)) {
 				/* could not submit URB, put it back */
 				spin_lock_irqsave(&ubc->isooutlock, flags);
 				if (ubc->isooutfree == NULL) {
@@ -1077,17 +1106,18 @@ static void write_iso_tasklet(unsigned long data)
 		/* process completed URB */
 		urb = done->urb;
 		switch (urb->status) {
+		case -EXDEV:			/* partial completion */
+			gig_dbg(DEBUG_ISO, "%s: URB partially completed",
+				__func__);
+			/* fall through - what's the difference anyway? */
 		case 0:				/* normal completion */
-			break;
-		case -EXDEV:			/* inspect individual frames */
-			/* assumptions (for lack of documentation):
-			 * - actual_length bytes of the frame in error are
+			/* inspect individual frames
+			 * assumptions (for lack of documentation):
+			 * - actual_length bytes of first frame in error are
 			 *   successfully sent
 			 * - all following frames are not sent at all
 			 */
-			gig_dbg(DEBUG_ISO, "%s: URB partially completed",
-				__func__);
-			offset = done->limit;	/* just in case */
+			offset = done->limit;	/* default (no error) */
 			for (i = 0; i < BAS_NUMFRAMES; i++) {
 				ifd = &urb->iso_frame_desc[i];
 				if (ifd->status ||
@@ -1122,7 +1152,7 @@ static void write_iso_tasklet(unsigned long data)
 			}
 #endif
 			break;
-		case -EPIPE:		//FIXME is this the code for "underrun"?
+		case -EPIPE:			/* stall - probably underrun */
 			dev_err(cs->dev, "isochronous write stalled\n");
 			error_hangup(bcs);
 			break;
@@ -1142,7 +1172,8 @@ static void write_iso_tasklet(unsigned long data)
 		spin_unlock_irqrestore(&ubc->isooutlock, flags);
 		if (next) {
 			/* only one URB still active - resubmit one */
-			if (submit_iso_write_urb(next) <= 0) {
+			rc = submit_iso_write_urb(next);
+			if (unlikely(rc <= 0 && rc != -ENODEV)) {
 				/* couldn't submit */
 				error_hangup(bcs);
 			}
@@ -1222,10 +1253,9 @@ static void read_iso_tasklet(unsigned long data)
 			break;
 		case -ENOENT:
 		case -ECONNRESET:
-			gig_dbg(DEBUG_ISO, "%s: URB canceled", __func__);
-			continue;		/* -> skip */
-		case -EINPROGRESS:		/* huh? */
-			gig_dbg(DEBUG_ISO, "%s: URB still pending", __func__);
+		case -EINPROGRESS:
+			gig_dbg(DEBUG_ISO, "%s: %s",
+				__func__, get_usb_statmsg(urb->status));
 			continue;		/* -> skip */
 		case -EPIPE:
 			dev_err(cs->dev, "isochronous read stalled\n");
@@ -1290,13 +1320,11 @@ static void read_iso_tasklet(unsigned long data)
 		urb->dev = bcs->cs->hw.bas->udev;
 		urb->transfer_flags = URB_ISO_ASAP;
 		urb->number_of_packets = BAS_NUMFRAMES;
-		spin_lock_irqsave(&cs->lock, flags);
-		rc = cs->connected ? usb_submit_urb(urb, SLAB_ATOMIC) : -ENODEV;
-		spin_unlock_irqrestore(&cs->lock, flags);
-		if (rc) {
+		rc = usb_submit_urb(urb, SLAB_ATOMIC);
+		if (unlikely(rc != 0 && rc != -ENODEV)) {
 			dev_err(cs->dev,
 				"could not resubmit isochronous read URB: %s\n",
-				get_usb_statmsg(rc));
+				get_usb_rcmsg(rc));
 			dump_urb(DEBUG_ISO, "resubmit iso read", urb);
 			error_hangup(bcs);
 		}
@@ -1397,7 +1425,6 @@ static void write_ctrl_callback(struct urb *urb, struct pt_regs *regs)
  *	timeout	timeout in seconds (0: no timeout)
  * return value:
  *	0 on success
- *	-EINVAL if a NULL pointer is encountered somewhere
  *	-EBUSY if another request is pending
  *	any URB submission error code
  */
@@ -1418,12 +1445,6 @@ static int req_submit(struct bc_state *bcs, int req, int val, int timeout)
 			req, ucs->pending);
 		return -EBUSY;
 	}
-	if (ucs->urb_ctrl->status == -EINPROGRESS) {
-		spin_unlock_irqrestore(&ucs->lock, flags);
-		dev_err(bcs->cs->dev,
-			"could not submit request 0x%02x: URB busy\n", req);
-		return -EBUSY;
-	}
 
 	ucs->dr_ctrl.bRequestType = OUT_VENDOR_REQ;
 	ucs->dr_ctrl.bRequest = req;
@@ -1465,22 +1486,36 @@ static int req_submit(struct bc_state *bcs, int req, int val, int timeout)
 static int gigaset_init_bchannel(struct bc_state *bcs)
 {
 	int req, ret;
+	unsigned long flags;
+
+	spin_lock_irqsave(&bcs->cs->lock, flags);
+	if (unlikely(!bcs->cs->connected)) {
+		gig_dbg(DEBUG_USBREQ, "%s: not connected", __func__);
+		spin_unlock_irqrestore(&bcs->cs->lock, flags);
+		return -ENODEV;
+	}
 
 	if ((ret = starturbs(bcs)) < 0) {
 		dev_err(bcs->cs->dev,
-			"could not start isochronous I/O for channel %d\n",
-			bcs->channel + 1);
-		error_hangup(bcs);
+			"could not start isochronous I/O for channel B%d: %s\n",
+			bcs->channel + 1,
+			ret == -EFAULT ? "null URB" : get_usb_rcmsg(ret));
+		if (ret != -ENODEV)
+			error_hangup(bcs);
+		spin_unlock_irqrestore(&bcs->cs->lock, flags);
 		return ret;
 	}
 
 	req = bcs->channel ? HD_OPEN_B2CHANNEL : HD_OPEN_B1CHANNEL;
 	if ((ret = req_submit(bcs, req, 0, BAS_TIMEOUT)) < 0) {
-		dev_err(bcs->cs->dev, "could not open channel %d: %s\n",
-			bcs->channel + 1, get_usb_statmsg(ret));
+		dev_err(bcs->cs->dev, "could not open channel B%d\n",
+			bcs->channel + 1);
 		stopurbs(bcs->hw.bas);
-		error_hangup(bcs);
+		if (ret != -ENODEV)
+			error_hangup(bcs);
 	}
+
+	spin_unlock_irqrestore(&bcs->cs->lock, flags);
 	return ret;
 }
 
@@ -1497,19 +1532,30 @@ static int gigaset_init_bchannel(struct bc_state *bcs)
 static int gigaset_close_bchannel(struct bc_state *bcs)
 {
 	int req, ret;
+	unsigned long flags;
+
+	spin_lock_irqsave(&bcs->cs->lock, flags);
+	if (unlikely(!bcs->cs->connected)) {
+		spin_unlock_irqrestore(&bcs->cs->lock, flags);
+		gig_dbg(DEBUG_USBREQ, "%s: not connected", __func__);
+		return -ENODEV;
+	}
 
 	if (!(atomic_read(&bcs->cs->hw.bas->basstate) &
 	      (bcs->channel ? BS_B2OPEN : BS_B1OPEN))) {
 		/* channel not running: just signal common.c */
+		spin_unlock_irqrestore(&bcs->cs->lock, flags);
 		gigaset_bchannel_down(bcs);
 		return 0;
 	}
 
+	/* channel running: tell device to close it */
 	req = bcs->channel ? HD_CLOSE_B2CHANNEL : HD_CLOSE_B1CHANNEL;
 	if ((ret = req_submit(bcs, req, 0, BAS_TIMEOUT)) < 0)
-		dev_err(bcs->cs->dev,
-			"could not submit HD_CLOSE_BxCHANNEL request: %s\n",
-			get_usb_statmsg(ret));
+		dev_err(bcs->cs->dev, "closing channel B%d failed\n",
+			bcs->channel + 1);
+
+	spin_unlock_irqrestore(&bcs->cs->lock, flags);
 	return ret;
 }
 
@@ -1545,8 +1591,6 @@ static void complete_cb(struct cardstate *cs)
 	kfree(cb);
 }
 
-static int atwrite_submit(struct cardstate *cs, unsigned char *buf, int len);
-
 /* write_command_callback
  * USB completion handler for AT command transmission
  * called by the USB subsystem in interrupt context
@@ -1560,13 +1604,17 @@ static void write_command_callback(struct urb *urb, struct pt_regs *regs)
 	struct bas_cardstate *ucs = cs->hw.bas;
 	unsigned long flags;
 
+	update_basstate(ucs, 0, BS_ATWRPEND);
+
 	/* check status */
 	switch (urb->status) {
 	case 0:					/* normal completion */
 		break;
-	case -ENOENT:			/* canceled */
-	case -ECONNRESET:		/* canceled (async) */
+	case -ENOENT:			/* cancelled */
+	case -ECONNRESET:		/* cancelled (async) */
 	case -EINPROGRESS:		/* pending */
+	case -ENODEV:			/* device removed */
+	case -ESHUTDOWN:		/* device shut down */
 		/* ignore silently */
 		gig_dbg(DEBUG_USBREQ, "%s: %s",
 			__func__, get_usb_statmsg(urb->status));
@@ -1627,19 +1675,17 @@ static void atrdy_timeout(unsigned long data)
  *	len	length of command to send
  * return value:
  *	0 on success
- *	-EFAULT if a NULL pointer is encountered somewhere
  *	-EBUSY if another request is pending
  *	any URB submission error code
  */
 static int atwrite_submit(struct cardstate *cs, unsigned char *buf, int len)
 {
 	struct bas_cardstate *ucs = cs->hw.bas;
-	unsigned long flags;
-	int ret;
+	int rc;
 
 	gig_dbg(DEBUG_USBREQ, "-------> HD_WRITE_ATMESSAGE (%d)", len);
 
-	if (ucs->urb_cmd_out->status == -EINPROGRESS) {
+	if (update_basstate(ucs, BS_ATWRPEND, 0) & BS_ATWRPEND) {
 		dev_err(cs->dev,
 			"could not submit HD_WRITE_ATMESSAGE: URB busy\n");
 		return -EBUSY;
@@ -1654,29 +1700,22 @@ static int atwrite_submit(struct cardstate *cs, unsigned char *buf, int len)
 			     usb_sndctrlpipe(ucs->udev, 0),
 			     (unsigned char*) &ucs->dr_cmd_out, buf, len,
 			     write_command_callback, cs);
-
-	spin_lock_irqsave(&cs->lock, flags);
-	ret = cs->connected ? usb_submit_urb(ucs->urb_cmd_out, SLAB_ATOMIC) : -ENODEV;
-	spin_unlock_irqrestore(&cs->lock, flags);
-
-	if (ret) {
+	rc = usb_submit_urb(ucs->urb_cmd_out, SLAB_ATOMIC);
+	if (unlikely(rc)) {
+		update_basstate(ucs, 0, BS_ATWRPEND);
 		dev_err(cs->dev, "could not submit HD_WRITE_ATMESSAGE: %s\n",
-			get_usb_statmsg(ret));
-		return ret;
+			get_usb_rcmsg(rc));
+		return rc;
 	}
 
-	/* submitted successfully */
-	update_basstate(ucs, 0, BS_ATREADY);
-
-	/* start timeout if necessary */
-	if (!(atomic_read(&ucs->basstate) & BS_ATTIMER)) {
+	/* submitted successfully, start timeout if necessary */
+	if (!(update_basstate(ucs, BS_ATTIMER, BS_ATREADY) & BS_ATTIMER)) {
 		gig_dbg(DEBUG_OUTPUT, "setting ATREADY timeout of %d/10 secs",
 			ATRDY_TIMEOUT);
 		ucs->timer_atrdy.expires = jiffies + ATRDY_TIMEOUT * HZ / 10;
 		ucs->timer_atrdy.data = (unsigned long) cs;
 		ucs->timer_atrdy.function = atrdy_timeout;
 		add_timer(&ucs->timer_atrdy);
-		update_basstate(ucs, BS_ATTIMER, 0);
 	}
 	return 0;
 }
@@ -1702,7 +1741,6 @@ static int start_cbsend(struct cardstate *cs)
 		gig_dbg(DEBUG_TRANSCMD|DEBUG_LOCKCMD, "AT channel not open");
 		rc = req_submit(cs->bcs, HD_OPEN_ATCHANNEL, 0, BAS_TIMEOUT);
 		if (rc < 0) {
-			dev_err(cs->dev, "could not open AT channel\n");
 			/* flush command queue */
 			spin_lock_irqsave(&cs->cmdlock, flags);
 			while (cs->cmdbuf != NULL)
@@ -1786,8 +1824,14 @@ static int gigaset_write_cmd(struct cardstate *cs,
 	cs->lastcmdbuf = cb;
 	spin_unlock_irqrestore(&cs->cmdlock, flags);
 
+	spin_lock_irqsave(&cs->lock, flags);
+	if (unlikely(!cs->connected)) {
+		spin_unlock_irqrestore(&cs->lock, flags);
+		gig_dbg(DEBUG_USBREQ, "%s: not connected", __func__);
+		return -ENODEV;
+	}
 	status = start_cbsend(cs);
-
+	spin_unlock_irqrestore(&cs->lock, flags);
 	return status < 0 ? status : len;
 }
 
@@ -1849,12 +1893,32 @@ static int gigaset_brkchars(struct cardstate *cs, const unsigned char buf[6])
  */
 static int gigaset_freebcshw(struct bc_state *bcs)
 {
-	if (!bcs->hw.bas)
+	struct bas_bc_state *ubc = bcs->hw.bas;
+	int i;
+
+	if (!ubc)
 		return 0;
 
-	if (bcs->hw.bas->isooutbuf)
-		kfree(bcs->hw.bas->isooutbuf);
-	kfree(bcs->hw.bas);
+	/* kill URBs and tasklets before freeing - better safe than sorry */
+	atomic_set(&ubc->running, 0);
+	for (i = 0; i < BAS_OUTURBS; ++i)
+		if (ubc->isoouturbs[i].urb) {
+			gig_dbg(DEBUG_INIT, "%s: killing iso out URB %d",
+				__func__, i);
+			usb_kill_urb(ubc->isoouturbs[i].urb);
+			usb_free_urb(ubc->isoouturbs[i].urb);
+		}
+	for (i = 0; i < BAS_INURBS; ++i)
+		if (ubc->isoinurbs[i]) {
+			gig_dbg(DEBUG_INIT, "%s: killing iso in URB %d",
+				__func__, i);
+			usb_kill_urb(ubc->isoinurbs[i]);
+			usb_free_urb(ubc->isoinurbs[i]);
+		}
+	tasklet_kill(&ubc->sent_tasklet);
+	tasklet_kill(&ubc->rcvd_tasklet);
+	kfree(ubc->isooutbuf);
+	kfree(ubc);
 	bcs->hw.bas = NULL;
 	return 1;
 }
@@ -1931,13 +1995,9 @@ static void gigaset_reinitbcshw(struct bc_state *bcs)
 
 static void gigaset_freecshw(struct cardstate *cs)
 {
-	struct bas_cardstate *ucs = cs->hw.bas;
-
-	del_timer(&ucs->timer_ctrl);
-	del_timer(&ucs->timer_atrdy);
-	del_timer(&ucs->timer_cmd_in);
-
+	/* timers, URBs and rcvbuf are disposed of in disconnect */
 	kfree(cs->hw.bas);
+	cs->hw.bas = NULL;
 }
 
 static int gigaset_initcshw(struct cardstate *cs)
@@ -2041,23 +2101,13 @@ static int gigaset_probe(struct usb_interface *interface,
 	struct bas_bc_state *ubc;
 	struct usb_endpoint_descriptor *endpoint;
 	int i, j;
-	int ret;
+	int rc;
 
 	gig_dbg(DEBUG_ANY,
 		"%s: Check if device matches .. (Vendor: 0x%x, Product: 0x%x)",
 		__func__, le16_to_cpu(udev->descriptor.idVendor),
 		le16_to_cpu(udev->descriptor.idProduct));
 
-	/* See if the device offered us matches what we can accept */
-	if ((le16_to_cpu(udev->descriptor.idVendor)  != USB_GIGA_VENDOR_ID) ||
-	    (le16_to_cpu(udev->descriptor.idProduct) != USB_GIGA_PRODUCT_ID &&
-	     le16_to_cpu(udev->descriptor.idProduct) != USB_4175_PRODUCT_ID &&
-	     le16_to_cpu(udev->descriptor.idProduct) != USB_SX303_PRODUCT_ID &&
-	     le16_to_cpu(udev->descriptor.idProduct) != USB_SX353_PRODUCT_ID)) {
-		gig_dbg(DEBUG_ANY, "%s: unmatched ID - exiting", __func__);
-		return -ENODEV;
-	}
-
 	/* set required alternate setting */
 	hostif = interface->cur_altsetting;
 	if (hostif->desc.bAlternateSetting != 3) {
@@ -2105,45 +2155,22 @@ static int gigaset_probe(struct usb_interface *interface,
 	 * - three for the different uses of the default control pipe
 	 * - three for each isochronous pipe
 	 */
-	ucs->urb_int_in = usb_alloc_urb(0, SLAB_KERNEL);
-	if (!ucs->urb_int_in) {
-		dev_err(cs->dev, "no free urbs available\n");
-		goto error;
-	}
-	ucs->urb_cmd_in = usb_alloc_urb(0, SLAB_KERNEL);
-	if (!ucs->urb_cmd_in) {
-		dev_err(cs->dev, "no free urbs available\n");
-		goto error;
-	}
-	ucs->urb_cmd_out = usb_alloc_urb(0, SLAB_KERNEL);
-	if (!ucs->urb_cmd_out) {
-		dev_err(cs->dev, "no free urbs available\n");
-		goto error;
-	}
-	ucs->urb_ctrl = usb_alloc_urb(0, SLAB_KERNEL);
-	if (!ucs->urb_ctrl) {
-		dev_err(cs->dev, "no free urbs available\n");
-		goto error;
-	}
+	if (!(ucs->urb_int_in = usb_alloc_urb(0, SLAB_KERNEL)) ||
+	    !(ucs->urb_cmd_in = usb_alloc_urb(0, SLAB_KERNEL)) ||
+	    !(ucs->urb_cmd_out = usb_alloc_urb(0, SLAB_KERNEL)) ||
+	    !(ucs->urb_ctrl = usb_alloc_urb(0, SLAB_KERNEL)))
+		goto allocerr;
 
 	for (j = 0; j < 2; ++j) {
 		ubc = cs->bcs[j].hw.bas;
-		for (i = 0; i < BAS_OUTURBS; ++i) {
-			ubc->isoouturbs[i].urb =
-				usb_alloc_urb(BAS_NUMFRAMES, SLAB_KERNEL);
-			if (!ubc->isoouturbs[i].urb) {
-				dev_err(cs->dev, "no free urbs available\n");
-				goto error;
-			}
-		}
-		for (i = 0; i < BAS_INURBS; ++i) {
-			ubc->isoinurbs[i] =
-				usb_alloc_urb(BAS_NUMFRAMES, SLAB_KERNEL);
-			if (!ubc->isoinurbs[i]) {
-				dev_err(cs->dev, "no free urbs available\n");
-				goto error;
-			}
-		}
+		for (i = 0; i < BAS_OUTURBS; ++i)
+			if (!(ubc->isoouturbs[i].urb =
+			      usb_alloc_urb(BAS_NUMFRAMES, SLAB_KERNEL)))
+				goto allocerr;
+		for (i = 0; i < BAS_INURBS; ++i)
+			if (!(ubc->isoinurbs[i] =
+			      usb_alloc_urb(BAS_NUMFRAMES, SLAB_KERNEL)))
+				goto allocerr;
 	}
 
 	ucs->rcvbuf = NULL;
@@ -2156,15 +2183,14 @@ static int gigaset_probe(struct usb_interface *interface,
 					(endpoint->bEndpointAddress) & 0x0f),
 			 ucs->int_in_buf, 3, read_int_callback, cs,
 			 endpoint->bInterval);
-	ret = usb_submit_urb(ucs->urb_int_in, SLAB_KERNEL);
-	if (ret) {
+	if ((rc = usb_submit_urb(ucs->urb_int_in, SLAB_KERNEL)) != 0) {
 		dev_err(cs->dev, "could not submit interrupt URB: %s\n",
-			get_usb_statmsg(ret));
+			get_usb_rcmsg(rc));
 		goto error;
 	}
 
 	/* tell the device that the driver is ready */
-	if ((ret = req_submit(cs->bcs, HD_DEVICE_INIT_ACK, 0, 0)) != 0)
+	if ((rc = req_submit(cs->bcs, HD_DEVICE_INIT_ACK, 0, 0)) != 0)
 		goto error;
 
 	/* tell common part that the device is ready */
@@ -2179,6 +2205,8 @@ static int gigaset_probe(struct usb_interface *interface,
 
 	return 0;
 
+allocerr:
+	dev_err(cs->dev, "could not allocate URBs\n");
 error:
 	freeurbs(cs);
 	usb_set_intfdata(interface, NULL);
@@ -2193,19 +2221,34 @@ static void gigaset_disconnect(struct usb_interface *interface)
 {
 	struct cardstate *cs;
 	struct bas_cardstate *ucs;
+	int j;
 
 	cs = usb_get_intfdata(interface);
 
 	ucs = cs->hw.bas;
 
 	dev_info(cs->dev, "disconnecting Gigaset base\n");
+
+	/* mark base as not ready, all channels disconnected */
+	atomic_set(&ucs->basstate, 0);
+
+	/* tell LL all channels are down */
+	//FIXME shouldn't gigaset_stop() do this?
+	for (j = 0; j < 2; ++j)
+		gigaset_bchannel_down(cs->bcs + j);
+
+	/* stop driver (common part) */
 	gigaset_stop(cs);
+
+	/* stop timers and URBs, free ressources */
+	del_timer_sync(&ucs->timer_ctrl);
+	del_timer_sync(&ucs->timer_atrdy);
+	del_timer_sync(&ucs->timer_cmd_in);
 	freeurbs(cs);
 	usb_set_intfdata(interface, NULL);
 	kfree(ucs->rcvbuf);
 	ucs->rcvbuf = NULL;
 	ucs->rcvbuf_size = 0;
-	atomic_set(&ucs->basstate, 0);
 	usb_put_dev(ucs->udev);
 	ucs->interface = NULL;
 	ucs->udev = NULL;
@@ -2277,6 +2320,8 @@ error:	if (cardstate)
  */
 static void __exit bas_gigaset_exit(void)
 {
+	struct bas_cardstate *ucs = cardstate->hw.bas;
+
 	gigaset_blockdriver(driver); /* => probe will fail
 				      * => no gigaset_start any more
 				      */
@@ -2284,14 +2329,26 @@ static void __exit bas_gigaset_exit(void)
 	gigaset_shutdown(cardstate);
 	/* from now on, no isdn callback should be possible */
 
-	if (atomic_read(&cardstate->hw.bas->basstate) & BS_ATOPEN) {
-		gig_dbg(DEBUG_ANY, "closing AT channel");
-		if (req_submit(cardstate->bcs,
-			       HD_CLOSE_ATCHANNEL, 0, BAS_TIMEOUT) >= 0) {
-			/* successfully submitted */
-			//FIXME wait for completion?
-		}
+	/* close all still open channels */
+	if (atomic_read(&ucs->basstate) & BS_B1OPEN) {
+		gig_dbg(DEBUG_INIT, "closing B1 channel");
+		usb_control_msg(ucs->udev, usb_sndctrlpipe(ucs->udev, 0),
+				HD_CLOSE_B1CHANNEL, OUT_VENDOR_REQ, 0, 0,
+				NULL, 0, BAS_TIMEOUT);
+	}
+	if (atomic_read(&ucs->basstate) & BS_B2OPEN) {
+		gig_dbg(DEBUG_INIT, "closing B2 channel");
+		usb_control_msg(ucs->udev, usb_sndctrlpipe(ucs->udev, 0),
+				HD_CLOSE_B2CHANNEL, OUT_VENDOR_REQ, 0, 0,
+				NULL, 0, BAS_TIMEOUT);
+	}
+	if (atomic_read(&ucs->basstate) & BS_ATOPEN) {
+		gig_dbg(DEBUG_INIT, "closing AT channel");
+		usb_control_msg(ucs->udev, usb_sndctrlpipe(ucs->udev, 0),
+				HD_CLOSE_ATCHANNEL, OUT_VENDOR_REQ, 0, 0,
+				NULL, 0, BAS_TIMEOUT);
 	}
+	atomic_set(&ucs->basstate, 0);
 
 	/* deregister this driver with the USB subsystem */
 	usb_deregister(&gigaset_usb_driver);
diff --git a/drivers/isdn/gigaset/common.c b/drivers/isdn/gigaset/common.c
index 749b3da1236e..e55767b2ccd3 100644
--- a/drivers/isdn/gigaset/common.c
+++ b/drivers/isdn/gigaset/common.c
@@ -781,8 +781,7 @@ error:	if (cs)
 }
 EXPORT_SYMBOL_GPL(gigaset_initcs);
 
-/* ReInitialize the b-channel structure */
-/* e.g. called on hangup, disconnect */
+/* ReInitialize the b-channel structure on hangup */
 void gigaset_bcs_reinit(struct bc_state *bcs)
 {
 	struct sk_buff *skb;
diff --git a/drivers/isdn/gigaset/ev-layer.c b/drivers/isdn/gigaset/ev-layer.c
index 1ba3424a286b..18e05c09b71c 100644
--- a/drivers/isdn/gigaset/ev-layer.c
+++ b/drivers/isdn/gigaset/ev-layer.c
@@ -373,6 +373,9 @@ struct reply_t gigaset_tab_cid_m10x[] = /* for M10x */
 
 	{EV_TIMEOUT,  750,750, -1,                  0, 0, {ACT_CONNTIMEOUT}},
 
+	/* B channel closed (general case) */
+	{EV_BC_CLOSED, -1, -1, -1,                 -1,-1, {ACT_NOTIFY_BC_DOWN}}, //FIXME
+
 	/* misc. */
 	{EV_PROTO_L2,  -1, -1, -1,                 -1,-1, {ACT_PROTO_L2}}, //FIXME
 
diff --git a/drivers/isdn/gigaset/gigaset.h b/drivers/isdn/gigaset/gigaset.h
index 9d21ba8757b0..22b9693f7c0a 100644
--- a/drivers/isdn/gigaset/gigaset.h
+++ b/drivers/isdn/gigaset/gigaset.h
@@ -75,7 +75,7 @@ extern int gigaset_debuglevel;	/* "needs" cast to (enum debuglevel) */
  * e.g. 'insmod usb_gigaset.o debug=0x2c' will set DEBUG_OPEN, DEBUG_CMD and
  * DEBUG_INTR.
  */
-enum debuglevel { /* up to 24 bits (atomic_t) */
+enum debuglevel {
 	DEBUG_REG	  = 0x0002, /* serial port I/O register operations */
 	DEBUG_OPEN	  = 0x0004, /* open/close serial port */
 	DEBUG_INTR	  = 0x0008, /* interrupt processing */
@@ -141,7 +141,7 @@ enum debuglevel { /* up to 24 bits (atomic_t) */
 			printk(KERN_DEBUG KBUILD_MODNAME ": " format "\n", \
 			       ## arg); \
 	} while (0)
-#define DEBUG_DEFAULT (DEBUG_INIT | DEBUG_TRANSCMD | DEBUG_CMD | DEBUG_USBREQ)
+#define DEBUG_DEFAULT (DEBUG_TRANSCMD | DEBUG_CMD | DEBUG_USBREQ)
 
 #else
 
@@ -627,8 +627,7 @@ struct gigaset_ops {
 	/* Called by gigaset_freecs() for freeing bcs->hw.xxx */
 	int (*freebcshw)(struct bc_state *bcs);
 
-	/* Called by gigaset_stop() or gigaset_bchannel_down() for resetting
-	   bcs->hw.xxx */
+	/* Called by gigaset_bchannel_down() for resetting bcs->hw.xxx */
 	void (*reinitbcshw)(struct bc_state *bcs);
 
 	/* Called by gigaset_initcs() for setting up cs->hw.xxx */
diff --git a/drivers/isdn/gigaset/i4l.c b/drivers/isdn/gigaset/i4l.c
index 0815dbfb8291..1654fa413575 100644
--- a/drivers/isdn/gigaset/i4l.c
+++ b/drivers/isdn/gigaset/i4l.c
@@ -73,7 +73,7 @@ static int writebuf_from_LL(int driverID, int channel, int ack,
 		len, skblen, (unsigned) skb->head[0], (unsigned) skb->head[1]);
 
 	/* pass to device-specific module */
-	return cs->ops->send_skb(bcs, skb); //FIXME cs->ops->send_skb() must handle !cs->connected correctly
+	return cs->ops->send_skb(bcs, skb);
 }
 
 void gigaset_skb_sent(struct bc_state *bcs, struct sk_buff *skb)
diff --git a/drivers/isdn/gigaset/isocdata.c b/drivers/isdn/gigaset/isocdata.c
index 45f017ed6e8c..8667daaa1a82 100644
--- a/drivers/isdn/gigaset/isocdata.c
+++ b/drivers/isdn/gigaset/isocdata.c
@@ -992,14 +992,18 @@ int gigaset_isoc_send_skb(struct bc_state *bcs, struct sk_buff *skb)
 	int len = skb->len;
 	unsigned long flags;
 
+	spin_lock_irqsave(&bcs->cs->lock, flags);
+	if (!bcs->cs->connected) {
+		spin_unlock_irqrestore(&bcs->cs->lock, flags);
+		return -ENODEV;
+	}
+
 	skb_queue_tail(&bcs->squeue, skb);
 	gig_dbg(DEBUG_ISO, "%s: skb queued, qlen=%d",
 		__func__, skb_queue_len(&bcs->squeue));
 
 	/* tasklet submits URB if necessary */
-	spin_lock_irqsave(&bcs->cs->lock, flags);
-	if (bcs->cs->connected)
-		tasklet_schedule(&bcs->hw.bas->sent_tasklet);
+	tasklet_schedule(&bcs->hw.bas->sent_tasklet);
 	spin_unlock_irqrestore(&bcs->cs->lock, flags);
 
 	return len;	/* ok so far */
diff --git a/drivers/isdn/gigaset/usb-gigaset.c b/drivers/isdn/gigaset/usb-gigaset.c
index bfb73fd5077e..d86ab68114b0 100644
--- a/drivers/isdn/gigaset/usb-gigaset.c
+++ b/drivers/isdn/gigaset/usb-gigaset.c
@@ -710,8 +710,8 @@ static int gigaset_probe(struct usb_interface *interface,
 	retval = -ENODEV; //FIXME
 
 	/* See if the device offered us matches what we can accept */
-	if ((le16_to_cpu(udev->descriptor.idVendor  != USB_M105_VENDOR_ID)) ||
-	    (le16_to_cpu(udev->descriptor.idProduct != USB_M105_PRODUCT_ID)))
+	if ((le16_to_cpu(udev->descriptor.idVendor)  != USB_M105_VENDOR_ID) ||
+	    (le16_to_cpu(udev->descriptor.idProduct) != USB_M105_PRODUCT_ID))
 		return -ENODEV;
 
 	/* this starts to become ascii art... */
diff --git a/drivers/isdn/i4l/isdn_tty.c b/drivers/isdn/i4l/isdn_tty.c
index 3585fb1f3344..2ac90242d263 100644
--- a/drivers/isdn/i4l/isdn_tty.c
+++ b/drivers/isdn/i4l/isdn_tty.c
@@ -2880,7 +2880,7 @@ isdn_tty_cmd_ATand(char **p, modem_info * info)
 			p[0]++;
 			i = 0;
 			while (*p[0] && (strchr("0123456789,-*[]?;", *p[0])) &&
-			       (i < ISDN_LMSNLEN))
+			       (i < ISDN_LMSNLEN - 1))
 				m->lmsn[i++] = *p[0]++;
 			m->lmsn[i] = '\0';
 			break;
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 3f5b64794542..626506234b76 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -4,8 +4,11 @@ menu "LED devices"
 config NEW_LEDS
 	bool "LED Support"
 	help
-	  Say Y to enable Linux LED support.  This is not related to standard
-	  keyboard LEDs which are controlled via the input system.
+	  Say Y to enable Linux LED support.  This allows control of supported
+	  LEDs from both userspace and optionally, by kernel events (triggers).
+
+	  This is not related to standard keyboard LEDs which are controlled
+	  via the input system.
 
 config LEDS_CLASS
 	tristate "LED Class Support"
diff --git a/drivers/leds/led-class.c b/drivers/leds/led-class.c
index b0b5d05fadd6..c75d0ef1609c 100644
--- a/drivers/leds/led-class.c
+++ b/drivers/leds/led-class.c
@@ -19,6 +19,7 @@
 #include <linux/sysdev.h>
 #include <linux/timer.h>
 #include <linux/err.h>
+#include <linux/ctype.h>
 #include <linux/leds.h>
 #include "leds.h"
 
@@ -43,9 +44,13 @@ static ssize_t led_brightness_store(struct class_device *dev,
 	ssize_t ret = -EINVAL;
 	char *after;
 	unsigned long state = simple_strtoul(buf, &after, 10);
+	size_t count = after - buf;
 
-	if (after - buf > 0) {
-		ret = after - buf;
+	if (*after && isspace(*after))
+		count++;
+
+	if (count == size) {
+		ret = count;
 		led_set_brightness(led_cdev, state);
 	}
 
diff --git a/drivers/leds/ledtrig-timer.c b/drivers/leds/ledtrig-timer.c
index f484b5d6dbf8..fbf141ef46ec 100644
--- a/drivers/leds/ledtrig-timer.c
+++ b/drivers/leds/ledtrig-timer.c
@@ -20,6 +20,7 @@
 #include <linux/device.h>
 #include <linux/sysdev.h>
 #include <linux/timer.h>
+#include <linux/ctype.h>
 #include <linux/leds.h>
 #include "leds.h"
 
@@ -69,11 +70,15 @@ static ssize_t led_delay_on_store(struct class_device *dev, const char *buf,
 	int ret = -EINVAL;
 	char *after;
 	unsigned long state = simple_strtoul(buf, &after, 10);
+	size_t count = after - buf;
 
-	if (after - buf > 0) {
+	if (*after && isspace(*after))
+		count++;
+
+	if (count == size) {
 		timer_data->delay_on = state;
 		mod_timer(&timer_data->timer, jiffies + 1);
-		ret = after - buf;
+		ret = count;
 	}
 
 	return ret;
@@ -97,11 +102,15 @@ static ssize_t led_delay_off_store(struct class_device *dev, const char *buf,
 	int ret = -EINVAL;
 	char *after;
 	unsigned long state = simple_strtoul(buf, &after, 10);
+	size_t count = after - buf;
+
+	if (*after && isspace(*after))
+		count++;
 
-	if (after - buf > 0) {
+	if (count == size) {
 		timer_data->delay_off = state;
 		mod_timer(&timer_data->timer, jiffies + 1);
-		ret = after - buf;
+		ret = count;
 	}
 
 	return ret;
diff --git a/drivers/macintosh/therm_adt746x.c b/drivers/macintosh/therm_adt746x.c
index 5ebfd1d138da..5282fec17075 100644
--- a/drivers/macintosh/therm_adt746x.c
+++ b/drivers/macintosh/therm_adt746x.c
@@ -627,8 +627,8 @@ thermostat_init(void)
 	if(therm_type == ADT7460)
 		device_create_file(&of_dev->dev, &dev_attr_sensor2_fan_speed);
 
-#ifndef CONFIG_I2C_KEYWEST
-	request_module("i2c-keywest");
+#ifndef CONFIG_I2C_POWERMAC
+	request_module("i2c-powermac");
 #endif
 
 	return i2c_add_driver(&thermostat_driver);
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 1ed5152db450..f19b874753a9 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -163,9 +163,19 @@ void md_new_event(mddev_t *mddev)
 {
 	atomic_inc(&md_event_count);
 	wake_up(&md_event_waiters);
+	sysfs_notify(&mddev->kobj, NULL, "sync_action");
 }
 EXPORT_SYMBOL_GPL(md_new_event);
 
+/* Alternate version that can be called from interrupts
+ * when calling sysfs_notify isn't needed.
+ */
+void md_new_event_inintr(mddev_t *mddev)
+{
+	atomic_inc(&md_event_count);
+	wake_up(&md_event_waiters);
+}
+
 /*
  * Enables to iterate over all existing md arrays
  * all_mddevs_lock protects this list.
@@ -278,11 +288,6 @@ static inline int mddev_lock(mddev_t * mddev)
 	return mutex_lock_interruptible(&mddev->reconfig_mutex);
 }
 
-static inline void mddev_lock_uninterruptible(mddev_t * mddev)
-{
-	mutex_lock(&mddev->reconfig_mutex);
-}
-
 static inline int mddev_trylock(mddev_t * mddev)
 {
 	return mutex_trylock(&mddev->reconfig_mutex);
@@ -2256,7 +2261,7 @@ action_store(mddev_t *mddev, const char *page, size_t len)
 	} else {
 		if (cmd_match(page, "check"))
 			set_bit(MD_RECOVERY_CHECK, &mddev->recovery);
-		else if (cmd_match(page, "repair"))
+		else if (!cmd_match(page, "repair"))
 			return -EINVAL;
 		set_bit(MD_RECOVERY_REQUESTED, &mddev->recovery);
 		set_bit(MD_RECOVERY_SYNC, &mddev->recovery);
@@ -2457,9 +2462,11 @@ md_attr_show(struct kobject *kobj, struct attribute *attr, char *page)
 
 	if (!entry->show)
 		return -EIO;
-	mddev_lock(mddev);
-	rv = entry->show(mddev, page);
-	mddev_unlock(mddev);
+	rv = mddev_lock(mddev);
+	if (!rv) {
+		rv = entry->show(mddev, page);
+		mddev_unlock(mddev);
+	}
 	return rv;
 }
 
@@ -2473,9 +2480,11 @@ md_attr_store(struct kobject *kobj, struct attribute *attr,
 
 	if (!entry->store)
 		return -EIO;
-	mddev_lock(mddev);
-	rv = entry->store(mddev, page, length);
-	mddev_unlock(mddev);
+	rv = mddev_lock(mddev);
+	if (!rv) {
+		rv = entry->store(mddev, page, length);
+		mddev_unlock(mddev);
+	}
 	return rv;
 }
 
@@ -4149,7 +4158,7 @@ void md_error(mddev_t *mddev, mdk_rdev_t *rdev)
 	set_bit(MD_RECOVERY_INTR, &mddev->recovery);
 	set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
 	md_wakeup_thread(mddev->thread);
-	md_new_event(mddev);
+	md_new_event_inintr(mddev);
 }
 
 /* seq_file implementation /proc/mdstat */
@@ -4340,8 +4349,9 @@ static int md_seq_show(struct seq_file *seq, void *v)
 		return 0;
 	}
 
-	if (mddev_lock(mddev)!=0) 
+	if (mddev_lock(mddev) < 0)
 		return -EINTR;
+
 	if (mddev->pers || mddev->raid_disks || !list_empty(&mddev->disks)) {
 		seq_printf(seq, "%s : %sactive", mdname(mddev),
 						mddev->pers ? "" : "in");
@@ -5027,8 +5037,10 @@ static int md_notify_reboot(struct notifier_block *this,
 		printk(KERN_INFO "md: stopping all md devices.\n");
 
 		ITERATE_MDDEV(mddev,tmp)
-			if (mddev_trylock(mddev))
+			if (mddev_trylock(mddev)) {
 				do_md_stop (mddev, 1);
+				mddev_unlock(mddev);
+			}
 		/*
 		 * certain more exotic SCSI devices are known to be
 		 * volatile wrt too early system reboots. While the
diff --git a/drivers/md/raid0.c b/drivers/md/raid0.c
index 678f4dbbea1d..cb8c6317e4e5 100644
--- a/drivers/md/raid0.c
+++ b/drivers/md/raid0.c
@@ -331,13 +331,14 @@ static int raid0_run (mddev_t *mddev)
 		goto out_free_conf;
 	size = conf->strip_zone[cur].size;
 
-	for (i=0; i< nb_zone; i++) {
-		conf->hash_table[i] = conf->strip_zone + cur;
+	conf->hash_table[0] = conf->strip_zone + cur;
+	for (i=1; i< nb_zone; i++) {
 		while (size <= conf->hash_spacing) {
 			cur++;
 			size += conf->strip_zone[cur].size;
 		}
 		size -= conf->hash_spacing;
+		conf->hash_table[i] = conf->strip_zone + cur;
 	}
 	if (conf->preshift) {
 		conf->hash_spacing >>= conf->preshift;
diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index 6081941de1b3..4070eff6f0f8 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -315,10 +315,11 @@ static int raid1_end_write_request(struct bio *bio, unsigned int bytes_done, int
 		if (r1_bio->bios[mirror] == bio)
 			break;
 
-	if (error == -ENOTSUPP && test_bit(R1BIO_Barrier, &r1_bio->state)) {
+	if (error == -EOPNOTSUPP && test_bit(R1BIO_Barrier, &r1_bio->state)) {
 		set_bit(BarriersNotsupp, &conf->mirrors[mirror].rdev->flags);
 		set_bit(R1BIO_BarrierRetry, &r1_bio->state);
 		r1_bio->mddev->barriers_work = 0;
+		/* Don't rdev_dec_pending in this branch - keep it for the retry */
 	} else {
 		/*
 		 * this branch is our 'one mirror IO has finished' event handler:
@@ -365,6 +366,7 @@ static int raid1_end_write_request(struct bio *bio, unsigned int bytes_done, int
 				}
 			}
 		}
+		rdev_dec_pending(conf->mirrors[mirror].rdev, conf->mddev);
 	}
 	/*
 	 *
@@ -374,11 +376,9 @@ static int raid1_end_write_request(struct bio *bio, unsigned int bytes_done, int
 	if (atomic_dec_and_test(&r1_bio->remaining)) {
 		if (test_bit(R1BIO_BarrierRetry, &r1_bio->state)) {
 			reschedule_retry(r1_bio);
-			/* Don't dec_pending yet, we want to hold
-			 * the reference over the retry
-			 */
 			goto out;
 		}
+		/* it really is the end of this request */
 		if (test_bit(R1BIO_BehindIO, &r1_bio->state)) {
 			/* free extra copy of the data pages */
 			int i = bio->bi_vcnt;
@@ -393,8 +393,6 @@ static int raid1_end_write_request(struct bio *bio, unsigned int bytes_done, int
 		md_write_end(r1_bio->mddev);
 		raid_end_bio_io(r1_bio);
 	}
-
-	rdev_dec_pending(conf->mirrors[mirror].rdev, conf->mddev);
  out:
 	if (to_put)
 		bio_put(to_put);
@@ -753,18 +751,24 @@ static int make_request(request_queue_t *q, struct bio * bio)
 	const int rw = bio_data_dir(bio);
 	int do_barriers;
 
-	if (unlikely(!mddev->barriers_work && bio_barrier(bio))) {
-		bio_endio(bio, bio->bi_size, -EOPNOTSUPP);
-		return 0;
-	}
-
 	/*
 	 * Register the new request and wait if the reconstruction
 	 * thread has put up a bar for new requests.
 	 * Continue immediately if no resync is active currently.
+	 * We test barriers_work *after* md_write_start as md_write_start
+	 * may cause the first superblock write, and that will check out
+	 * if barriers work.
 	 */
+
 	md_write_start(mddev, bio); /* wait on superblock update early */
 
+	if (unlikely(!mddev->barriers_work && bio_barrier(bio))) {
+		if (rw == WRITE)
+			md_write_end(mddev);
+		bio_endio(bio, bio->bi_size, -EOPNOTSUPP);
+		return 0;
+	}
+
 	wait_barrier(conf);
 
 	disk_stat_inc(mddev->gendisk, ios[rw]);
@@ -1404,10 +1408,11 @@ static void raid1d(mddev_t *mddev)
 			unplug = 1;
 		} else if (test_bit(R1BIO_BarrierRetry, &r1_bio->state)) {
 			/* some requests in the r1bio were BIO_RW_BARRIER
-			 * requests which failed with -ENOTSUPP.  Hohumm..
+			 * requests which failed with -EOPNOTSUPP.  Hohumm..
 			 * Better resubmit without the barrier.
 			 * We know which devices to resubmit for, because
 			 * all others have had their bios[] entry cleared.
+			 * We already have a nr_pending reference on these rdevs.
 			 */
 			int i;
 			clear_bit(R1BIO_BarrierRetry, &r1_bio->state);
diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index 617012bc107a..1440935414e6 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -1407,43 +1407,54 @@ static void raid10d(mddev_t *mddev)
 				if (s > (PAGE_SIZE>>9))
 					s = PAGE_SIZE >> 9;
 
+				rcu_read_lock();
 				do {
 					int d = r10_bio->devs[sl].devnum;
-					rdev = conf->mirrors[d].rdev;
+					rdev = rcu_dereference(conf->mirrors[d].rdev);
 					if (rdev &&
-					    test_bit(In_sync, &rdev->flags) &&
-					    sync_page_io(rdev->bdev,
-							 r10_bio->devs[sl].addr +
-							 sect + rdev->data_offset,
-							 s<<9,
-							 conf->tmppage, READ))
-						success = 1;
-					else {
-						sl++;
-						if (sl == conf->copies)
-							sl = 0;
+					    test_bit(In_sync, &rdev->flags)) {
+						atomic_inc(&rdev->nr_pending);
+						rcu_read_unlock();
+						success = sync_page_io(rdev->bdev,
+								       r10_bio->devs[sl].addr +
+								       sect + rdev->data_offset,
+								       s<<9,
+								       conf->tmppage, READ);
+						rdev_dec_pending(rdev, mddev);
+						rcu_read_lock();
+						if (success)
+							break;
 					}
+					sl++;
+					if (sl == conf->copies)
+						sl = 0;
 				} while (!success && sl != r10_bio->read_slot);
+				rcu_read_unlock();
 
 				if (success) {
 					int start = sl;
 					/* write it back and re-read */
+					rcu_read_lock();
 					while (sl != r10_bio->read_slot) {
 						int d;
 						if (sl==0)
 							sl = conf->copies;
 						sl--;
 						d = r10_bio->devs[sl].devnum;
-						rdev = conf->mirrors[d].rdev;
-						atomic_add(s, &rdev->corrected_errors);
+						rdev = rcu_dereference(conf->mirrors[d].rdev);
 						if (rdev &&
 						    test_bit(In_sync, &rdev->flags)) {
+							atomic_inc(&rdev->nr_pending);
+							rcu_read_unlock();
+							atomic_add(s, &rdev->corrected_errors);
 							if (sync_page_io(rdev->bdev,
 									 r10_bio->devs[sl].addr +
 									 sect + rdev->data_offset,
 									 s<<9, conf->tmppage, WRITE) == 0)
 								/* Well, this device is dead */
 								md_error(mddev, rdev);
+							rdev_dec_pending(rdev, mddev);
+							rcu_read_lock();
 						}
 					}
 					sl = start;
@@ -1453,17 +1464,22 @@ static void raid10d(mddev_t *mddev)
 							sl = conf->copies;
 						sl--;
 						d = r10_bio->devs[sl].devnum;
-						rdev = conf->mirrors[d].rdev;
+						rdev = rcu_dereference(conf->mirrors[d].rdev);
 						if (rdev &&
 						    test_bit(In_sync, &rdev->flags)) {
+							atomic_inc(&rdev->nr_pending);
+							rcu_read_unlock();
 							if (sync_page_io(rdev->bdev,
 									 r10_bio->devs[sl].addr +
 									 sect + rdev->data_offset,
 									 s<<9, conf->tmppage, READ) == 0)
 								/* Well, this device is dead */
 								md_error(mddev, rdev);
+							rdev_dec_pending(rdev, mddev);
+							rcu_read_lock();
 						}
 					}
+					rcu_read_unlock();
 				} else {
 					/* Cannot read from anywhere -- bye bye array */
 					md_error(mddev, conf->mirrors[r10_bio->devs[r10_bio->read_slot].devnum].rdev);
diff --git a/drivers/media/Kconfig b/drivers/media/Kconfig
index fffc711c260c..344d83aae3ec 100644
--- a/drivers/media/Kconfig
+++ b/drivers/media/Kconfig
@@ -8,22 +8,54 @@ config VIDEO_DEV
 	tristate "Video For Linux"
 	---help---
 	  Support for audio/video capture and overlay devices and FM radio
-	  cards. The exact capabilities of each device vary. User tools for
-	  this are available from
-	  <ftp://ftp.uk.linux.org/pub/linux/video4linux/>.
+	  cards. The exact capabilities of each device vary.
 
 	  This kernel includes support for the new Video for Linux Two API,
 	  (V4L2) as well as the original system. Drivers and applications
 	  need to be rewritten to use V4L2, but drivers for popular cards
 	  and applications for most video capture functions already exist.
 
-	  Documentation for the original API is included in the file
-	  <file:Documentation/video4linux/API.html>.  Documentation for V4L2 is
-	  available on the web at <http://bytesex.org/v4l/>.
+	  Additional info and docs are available on the web at
+	  <http://linuxtv.org>
+
+	  Documentation for V4L2 is also available on the web at
+	  <http://bytesex.org/v4l/>.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called videodev.
 
+config VIDEO_V4L1
+	boolean "Enable Video For Linux API 1 (DEPRECATED)"
+	depends on VIDEO_DEV
+	select VIDEO_V4L1_COMPAT
+	default y
+	---help---
+	  Enables a compatibility API used by most V4L2 devices to allow
+	  its usage with legacy applications that supports only V4L1 api.
+
+	  If you are unsure as to whether this is required, answer Y.
+
+config VIDEO_V4L1_COMPAT
+	boolean "Enable Video For Linux API 1 compatible Layer"
+	depends on VIDEO_DEV
+	default y
+	---help---
+	  This api were developed to be used at Kernel 2.2 and 2.4, but
+	  lacks support for several video standards. There are several
+	  drivers at kernel that still depends on it.
+
+	  Documentation for the original API is included in the file
+	  <Documentation/video4linux/API.html>.
+
+	  User tools for this are available from
+	  <ftp://ftp.uk.linux.org/pub/linux/video4linux/>.
+
+	  If you are unsure as to whether this is required, answer Y.
+
+config VIDEO_V4L2
+	tristate
+	default y
+
 source "drivers/media/video/Kconfig"
 
 source "drivers/media/radio/Kconfig"
@@ -65,4 +97,3 @@ config USB_DABUSB
 	  module will be called dabusb.
 
 endmenu
-
diff --git a/drivers/media/common/Kconfig b/drivers/media/common/Kconfig
index 6a901a0268e1..1a04db4552da 100644
--- a/drivers/media/common/Kconfig
+++ b/drivers/media/common/Kconfig
@@ -1,9 +1,10 @@
 config VIDEO_SAA7146
 	tristate
-	select I2C
+	depends on I2C
 
 config VIDEO_SAA7146_VV
 	tristate
+	select VIDEO_V4L2
 	select VIDEO_BUF
 	select VIDEO_VIDEOBUF
 	select VIDEO_SAA7146
diff --git a/drivers/media/dvb/Kconfig b/drivers/media/dvb/Kconfig
index 3f0ec6be03ae..a97c8f5e9a5d 100644
--- a/drivers/media/dvb/Kconfig
+++ b/drivers/media/dvb/Kconfig
@@ -22,26 +22,26 @@ config DVB
 source "drivers/media/dvb/dvb-core/Kconfig"
 
 comment "Supported SAA7146 based PCI Adapters"
-	depends on DVB_CORE && PCI
+	depends on DVB_CORE && PCI && I2C
 source "drivers/media/dvb/ttpci/Kconfig"
 
 comment "Supported USB Adapters"
-	depends on DVB_CORE && USB
+	depends on DVB_CORE && USB && I2C
 source "drivers/media/dvb/dvb-usb/Kconfig"
 source "drivers/media/dvb/ttusb-budget/Kconfig"
 source "drivers/media/dvb/ttusb-dec/Kconfig"
 source "drivers/media/dvb/cinergyT2/Kconfig"
 
 comment "Supported FlexCopII (B2C2) Adapters"
-	depends on DVB_CORE && (PCI || USB)
+	depends on DVB_CORE && (PCI || USB) && I2C
 source "drivers/media/dvb/b2c2/Kconfig"
 
 comment "Supported BT878 Adapters"
-	depends on DVB_CORE && PCI
+	depends on DVB_CORE && PCI && I2C
 source "drivers/media/dvb/bt8xx/Kconfig"
 
 comment "Supported Pluto2 Adapters"
-	depends on DVB_CORE && PCI
+	depends on DVB_CORE && PCI && I2C
 source "drivers/media/dvb/pluto2/Kconfig"
 
 comment "Supported DVB Frontends"
diff --git a/drivers/media/dvb/b2c2/Kconfig b/drivers/media/dvb/b2c2/Kconfig
index 2963605c0ecc..d7f1fd5b7b02 100644
--- a/drivers/media/dvb/b2c2/Kconfig
+++ b/drivers/media/dvb/b2c2/Kconfig
@@ -1,6 +1,6 @@
 config DVB_B2C2_FLEXCOP
 	tristate "Technisat/B2C2 FlexCopII(b) and FlexCopIII adapters"
-	depends on DVB_CORE
+	depends on DVB_CORE && I2C
 	select DVB_STV0299
 	select DVB_MT352
 	select DVB_MT312
@@ -16,7 +16,7 @@ config DVB_B2C2_FLEXCOP
 
 config DVB_B2C2_FLEXCOP_PCI
 	tristate "Technisat/B2C2 Air/Sky/Cable2PC PCI"
-	depends on DVB_B2C2_FLEXCOP && PCI
+	depends on DVB_B2C2_FLEXCOP && PCI && I2C
 	help
 	  Support for the Air/Sky/CableStar2 PCI card (DVB/ATSC) by Technisat/B2C2.
 
@@ -24,7 +24,7 @@ config DVB_B2C2_FLEXCOP_PCI
 
 config DVB_B2C2_FLEXCOP_USB
 	tristate "Technisat/B2C2 Air/Sky/Cable2PC USB"
-	depends on DVB_B2C2_FLEXCOP && USB
+	depends on DVB_B2C2_FLEXCOP && USB && I2C
 	help
 	  Support for the Air/Sky/Cable2PC USB1.1 box (DVB/ATSC) by Technisat/B2C2,
 
diff --git a/drivers/media/dvb/bt8xx/Kconfig b/drivers/media/dvb/bt8xx/Kconfig
index 376ca48f1d1d..f394002118f8 100644
--- a/drivers/media/dvb/bt8xx/Kconfig
+++ b/drivers/media/dvb/bt8xx/Kconfig
@@ -1,12 +1,13 @@
 config DVB_BT8XX
 	tristate "BT8xx based PCI cards"
-	depends on DVB_CORE && PCI && VIDEO_BT848
+	depends on DVB_CORE && PCI && I2C && VIDEO_BT848
 	select DVB_MT352
 	select DVB_SP887X
 	select DVB_NXT6000
 	select DVB_CX24110
 	select DVB_OR51211
 	select DVB_LGDT330X
+	select DVB_ZL10353
 	select FW_LOADER
 	help
 	  Support for PCI cards based on the Bt8xx PCI bridge. Examples are
diff --git a/drivers/media/dvb/bt8xx/dvb-bt8xx.c b/drivers/media/dvb/bt8xx/dvb-bt8xx.c
index baa8227ef87c..ccc7b2eb4a2d 100644
--- a/drivers/media/dvb/bt8xx/dvb-bt8xx.c
+++ b/drivers/media/dvb/bt8xx/dvb-bt8xx.c
@@ -115,7 +115,7 @@ static int is_pci_slot_eq(struct pci_dev* adev, struct pci_dev* bdev)
 	return 0;
 }
 
-static struct bt878 __init *dvb_bt8xx_878_match(unsigned int bttv_nr, struct pci_dev* bttv_pci_dev)
+static struct bt878 __devinit *dvb_bt8xx_878_match(unsigned int bttv_nr, struct pci_dev* bttv_pci_dev)
 {
 	unsigned int card_nr;
 
@@ -709,7 +709,7 @@ static void frontend_init(struct dvb_bt8xx_card *card, u32 type)
 		}
 }
 
-static int __init dvb_bt8xx_load_card(struct dvb_bt8xx_card *card, u32 type)
+static int __devinit dvb_bt8xx_load_card(struct dvb_bt8xx_card *card, u32 type)
 {
 	int result;
 
@@ -794,7 +794,7 @@ static int __init dvb_bt8xx_load_card(struct dvb_bt8xx_card *card, u32 type)
 	return 0;
 }
 
-static int dvb_bt8xx_probe(struct bttv_sub_device *sub)
+static int __devinit dvb_bt8xx_probe(struct bttv_sub_device *sub)
 {
 	struct dvb_bt8xx_card *card;
 	struct pci_dev* bttv_pci_dev;
diff --git a/drivers/media/dvb/cinergyT2/cinergyT2.c b/drivers/media/dvb/cinergyT2/cinergyT2.c
index 71b575dc22bd..9325d039ea65 100644
--- a/drivers/media/dvb/cinergyT2/cinergyT2.c
+++ b/drivers/media/dvb/cinergyT2/cinergyT2.c
@@ -902,7 +902,10 @@ static int cinergyt2_probe (struct usb_interface *intf,
 		return -ENOMEM;
 	}
 
-	dvb_register_adapter(&cinergyt2->adapter, DRIVER_NAME, THIS_MODULE);
+	if ((err = dvb_register_adapter(&cinergyt2->adapter, DRIVER_NAME, THIS_MODULE)) < 0) {
+		kfree(cinergyt2);
+		return err;
+	}
 
 	cinergyt2->demux.priv = cinergyt2;
 	cinergyt2->demux.filternum = 256;
diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c
index 4f8f257e6795..a051790161b0 100644
--- a/drivers/media/dvb/dvb-core/dvb_frontend.c
+++ b/drivers/media/dvb/dvb-core/dvb_frontend.c
@@ -106,6 +106,8 @@ struct dvb_frontend_private {
 	unsigned long tune_mode_flags;
 	unsigned int delay;
 	unsigned int reinitialise;
+	int tone;
+	int voltage;
 
 	/* swzigzag values */
 	unsigned int state;
@@ -537,6 +539,12 @@ static int dvb_frontend_thread(void *data)
 
 		if (fepriv->reinitialise) {
 			dvb_frontend_init(fe);
+			if (fepriv->tone != -1) {
+				fe->ops->set_tone(fe, fepriv->tone);
+			}
+			if (fepriv->voltage != -1) {
+				fe->ops->set_voltage(fe, fepriv->voltage);
+			}
 			fepriv->reinitialise = 0;
 		}
 
@@ -788,6 +796,7 @@ static int dvb_frontend_ioctl(struct inode *inode, struct file *file,
 	case FE_SET_TONE:
 		if (fe->ops->set_tone) {
 			err = fe->ops->set_tone(fe, (fe_sec_tone_mode_t) parg);
+			fepriv->tone = (fe_sec_tone_mode_t) parg;
 			fepriv->state = FESTATE_DISEQC;
 			fepriv->status = 0;
 		}
@@ -796,6 +805,7 @@ static int dvb_frontend_ioctl(struct inode *inode, struct file *file,
 	case FE_SET_VOLTAGE:
 		if (fe->ops->set_voltage) {
 			err = fe->ops->set_voltage(fe, (fe_sec_voltage_t) parg);
+			fepriv->voltage = (fe_sec_voltage_t) parg;
 			fepriv->state = FESTATE_DISEQC;
 			fepriv->status = 0;
 		}
@@ -995,6 +1005,8 @@ static int dvb_frontend_open(struct inode *inode, struct file *file)
 
 		/* normal tune mode when opened R/W */
 		fepriv->tune_mode_flags &= ~FE_TUNE_MODE_ONESHOT;
+		fepriv->tone = -1;
+		fepriv->voltage = -1;
 	}
 
 	return ret;
diff --git a/drivers/media/dvb/dvb-core/dvbdev.c b/drivers/media/dvb/dvb-core/dvbdev.c
index 96fe0ecae250..3852430d0260 100644
--- a/drivers/media/dvb/dvb-core/dvbdev.c
+++ b/drivers/media/dvb/dvb-core/dvbdev.c
@@ -219,8 +219,6 @@ int dvb_register_device(struct dvb_adapter *adap, struct dvb_device **pdvbdev,
 		return -ENOMEM;
 	}
 
-	mutex_unlock(&dvbdev_register_lock);
-
 	memcpy(dvbdev, template, sizeof(struct dvb_device));
 	dvbdev->type = type;
 	dvbdev->id = id;
@@ -231,6 +229,8 @@ int dvb_register_device(struct dvb_adapter *adap, struct dvb_device **pdvbdev,
 
 	list_add_tail (&dvbdev->list_head, &adap->device_list);
 
+	mutex_unlock(&dvbdev_register_lock);
+
 	devfs_mk_cdev(MKDEV(DVB_MAJOR, nums2minor(adap->num, type, id)),
 			S_IFCHR | S_IRUSR | S_IWUSR,
 			"dvb/adapter%d/%s%d", adap->num, dnames[type], id);
diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig
index d3df12039b06..e388fb1567d6 100644
--- a/drivers/media/dvb/dvb-usb/Kconfig
+++ b/drivers/media/dvb/dvb-usb/Kconfig
@@ -1,6 +1,6 @@
 config DVB_USB
 	tristate "Support for various USB DVB devices"
-	depends on DVB_CORE && USB
+	depends on DVB_CORE && USB && I2C
 	select FW_LOADER
 	help
 	  By enabling this you will be able to choose the various supported
diff --git a/drivers/media/dvb/dvb-usb/cxusb.c b/drivers/media/dvb/dvb-usb/cxusb.c
index 7edd6362b9cc..1f0d3e995c8d 100644
--- a/drivers/media/dvb/dvb-usb/cxusb.c
+++ b/drivers/media/dvb/dvb-usb/cxusb.c
@@ -150,6 +150,15 @@ static int cxusb_power_ctrl(struct dvb_usb_device *d, int onoff)
 		return cxusb_ctrl_msg(d, CMD_POWER_OFF, &b, 1, NULL, 0);
 }
 
+static int cxusb_bluebird_power_ctrl(struct dvb_usb_device *d, int onoff)
+{
+	u8 b = 0;
+	if (onoff)
+		return cxusb_ctrl_msg(d, CMD_POWER_ON, &b, 1, NULL, 0);
+	else
+		return 0;
+}
+
 static int cxusb_streaming_ctrl(struct dvb_usb_device *d, int onoff)
 {
 	u8 buf[2] = { 0x03, 0x00 };
@@ -544,7 +553,7 @@ static struct dvb_usb_properties cxusb_bluebird_lgh064f_properties = {
 	.size_of_priv     = sizeof(struct cxusb_state),
 
 	.streaming_ctrl   = cxusb_streaming_ctrl,
-	.power_ctrl       = cxusb_power_ctrl,
+	.power_ctrl       = cxusb_bluebird_power_ctrl,
 	.frontend_attach  = cxusb_lgdt3303_frontend_attach,
 	.tuner_attach     = cxusb_lgh064f_tuner_attach,
 
@@ -589,7 +598,7 @@ static struct dvb_usb_properties cxusb_bluebird_dee1601_properties = {
 	.size_of_priv     = sizeof(struct cxusb_state),
 
 	.streaming_ctrl   = cxusb_streaming_ctrl,
-	.power_ctrl       = cxusb_power_ctrl,
+	.power_ctrl       = cxusb_bluebird_power_ctrl,
 	.frontend_attach  = cxusb_dee1601_frontend_attach,
 	.tuner_attach     = cxusb_dee1601_tuner_attach,
 
@@ -638,7 +647,7 @@ static struct dvb_usb_properties cxusb_bluebird_lgz201_properties = {
 	.size_of_priv     = sizeof(struct cxusb_state),
 
 	.streaming_ctrl   = cxusb_streaming_ctrl,
-	.power_ctrl       = cxusb_power_ctrl,
+	.power_ctrl       = cxusb_bluebird_power_ctrl,
 	.frontend_attach  = cxusb_mt352_frontend_attach,
 	.tuner_attach     = cxusb_lgz201_tuner_attach,
 
@@ -683,7 +692,7 @@ static struct dvb_usb_properties cxusb_bluebird_dtt7579_properties = {
 	.size_of_priv     = sizeof(struct cxusb_state),
 
 	.streaming_ctrl   = cxusb_streaming_ctrl,
-	.power_ctrl       = cxusb_power_ctrl,
+	.power_ctrl       = cxusb_bluebird_power_ctrl,
 	.frontend_attach  = cxusb_mt352_frontend_attach,
 	.tuner_attach     = cxusb_dtt7579_tuner_attach,
 
diff --git a/drivers/media/dvb/frontends/cx24123.c b/drivers/media/dvb/frontends/cx24123.c
index d661c6f9cbe5..691dc840dcc0 100644
--- a/drivers/media/dvb/frontends/cx24123.c
+++ b/drivers/media/dvb/frontends/cx24123.c
@@ -29,6 +29,9 @@
 #include "dvb_frontend.h"
 #include "cx24123.h"
 
+#define XTAL 10111000
+
+static int force_band;
 static int debug;
 #define dprintk(args...) \
 	do { \
@@ -52,6 +55,7 @@ struct cx24123_state
 	u32 VGAarg;
 	u32 bandselectarg;
 	u32 pllarg;
+	u32 FILTune;
 
 	/* The Demod/Tuner can't easily provide these, we cache them */
 	u32 currentfreq;
@@ -63,43 +67,33 @@ static struct
 {
 	u32 symbolrate_low;
 	u32 symbolrate_high;
-	u32 VCAslope;
-	u32 VCAoffset;
-	u32 VGA1offset;
-	u32 VGA2offset;
 	u32 VCAprogdata;
 	u32 VGAprogdata;
+	u32 FILTune;
 } cx24123_AGC_vals[] =
 {
 	{
 		.symbolrate_low		= 1000000,
 		.symbolrate_high	= 4999999,
-		.VCAslope		= 0x07,
-		.VCAoffset		= 0x0f,
-		.VGA1offset		= 0x1f8,
-		.VGA2offset		= 0x1f8,
-		.VGAprogdata		= (2 << 18) | (0x1f8 << 9) | 0x1f8,
-		.VCAprogdata		= (4 << 18) | (0x07 << 9) | 0x07,
+		/* the specs recommend other values for VGA offsets,
+		   but tests show they are wrong */
+		.VGAprogdata		= (1 << 19) | (0x180 << 9) | 0x1e0,
+		.VCAprogdata		= (2 << 19) | (0x07 << 9) | 0x07,
+		.FILTune		= 0x27f /* 0.41 V */
 	},
 	{
 		.symbolrate_low		=  5000000,
 		.symbolrate_high	= 14999999,
-		.VCAslope		= 0x1f,
-		.VCAoffset		= 0x1f,
-		.VGA1offset		= 0x1e0,
-		.VGA2offset		= 0x180,
-		.VGAprogdata		= (2 << 18) | (0x180 << 9) | 0x1e0,
-		.VCAprogdata		= (4 << 18) | (0x07 << 9) | 0x1f,
+		.VGAprogdata		= (1 << 19) | (0x180 << 9) | 0x1e0,
+		.VCAprogdata		= (2 << 19) | (0x07 << 9) | 0x1f,
+		.FILTune		= 0x317 /* 0.90 V */
 	},
 	{
 		.symbolrate_low		= 15000000,
 		.symbolrate_high	= 45000000,
-		.VCAslope		= 0x3f,
-		.VCAoffset		= 0x3f,
-		.VGA1offset		= 0x180,
-		.VGA2offset		= 0x100,
-		.VGAprogdata		= (2 << 18) | (0x100 << 9) | 0x180,
-		.VCAprogdata		= (4 << 18) | (0x07 << 9) | 0x3f,
+		.VGAprogdata		= (1 << 19) | (0x100 << 9) | 0x180,
+		.VCAprogdata		= (2 << 19) | (0x07 << 9) | 0x3f,
+		.FILTune		= 0x145 /* 2.70 V */
 	},
 };
 
@@ -112,91 +106,80 @@ static struct
 {
 	u32 freq_low;
 	u32 freq_high;
-	u32 bandselect;
 	u32 VCOdivider;
-	u32 VCOnumber;
 	u32 progdata;
 } cx24123_bandselect_vals[] =
 {
+	/* band 1 */
 	{
 		.freq_low	= 950000,
-		.freq_high	= 1018999,
-		.bandselect	= 0x40,
-		.VCOdivider	= 4,
-		.VCOnumber	= 7,
-		.progdata	= (0 << 18) | (0 << 9) | 0x40,
-	},
-	{
-		.freq_low	= 1019000,
 		.freq_high	= 1074999,
-		.bandselect	= 0x80,
 		.VCOdivider	= 4,
-		.VCOnumber	= 8,
-		.progdata	= (0 << 18) | (0 << 9) | 0x80,
+		.progdata	= (0 << 19) | (0 << 9) | 0x40,
 	},
+
+	/* band 2 */
 	{
 		.freq_low	= 1075000,
-		.freq_high	= 1227999,
-		.bandselect	= 0x01,
-		.VCOdivider	= 2,
-		.VCOnumber	= 1,
-		.progdata	= (0 << 18) | (1 << 9) | 0x01,
+		.freq_high	= 1177999,
+		.VCOdivider	= 4,
+		.progdata	= (0 << 19) | (0 << 9) | 0x80,
 	},
+
+	/* band 3 */
 	{
-		.freq_low	= 1228000,
-		.freq_high	= 1349999,
-		.bandselect	= 0x02,
+		.freq_low	= 1178000,
+		.freq_high	= 1295999,
 		.VCOdivider	= 2,
-		.VCOnumber	= 2,
-		.progdata	= (0 << 18) | (1 << 9) | 0x02,
+		.progdata	= (0 << 19) | (1 << 9) | 0x01,
 	},
+
+	/* band 4 */
 	{
-		.freq_low	= 1350000,
-		.freq_high	= 1481999,
-		.bandselect	= 0x04,
+		.freq_low	= 1296000,
+		.freq_high	= 1431999,
 		.VCOdivider	= 2,
-		.VCOnumber	= 3,
-		.progdata	= (0 << 18) | (1 << 9) | 0x04,
+		.progdata	= (0 << 19) | (1 << 9) | 0x02,
 	},
+
+	/* band 5 */
 	{
-		.freq_low	= 1482000,
-		.freq_high	= 1595999,
-		.bandselect	= 0x08,
+		.freq_low	= 1432000,
+		.freq_high	= 1575999,
 		.VCOdivider	= 2,
-		.VCOnumber	= 4,
-		.progdata	= (0 << 18) | (1 << 9) | 0x08,
+		.progdata	= (0 << 19) | (1 << 9) | 0x04,
 	},
+
+	/* band 6 */
 	{
-		.freq_low	= 1596000,
+		.freq_low	= 1576000,
 		.freq_high	= 1717999,
-		.bandselect	= 0x10,
 		.VCOdivider	= 2,
-		.VCOnumber	= 5,
-		.progdata	= (0 << 18) | (1 << 9) | 0x10,
+		.progdata	= (0 << 19) | (1 << 9) | 0x08,
 	},
+
+	/* band 7 */
 	{
 		.freq_low	= 1718000,
 		.freq_high	= 1855999,
-		.bandselect	= 0x20,
 		.VCOdivider	= 2,
-		.VCOnumber	= 6,
-		.progdata	= (0 << 18) | (1 << 9) | 0x20,
+		.progdata	= (0 << 19) | (1 << 9) | 0x10,
 	},
+
+	/* band 8 */
 	{
 		.freq_low	= 1856000,
 		.freq_high	= 2035999,
-		.bandselect	= 0x40,
 		.VCOdivider	= 2,
-		.VCOnumber	= 7,
-		.progdata	= (0 << 18) | (1 << 9) | 0x40,
+		.progdata	= (0 << 19) | (1 << 9) | 0x20,
 	},
+
+	/* band 9 */
 	{
 		.freq_low	= 2036000,
-		.freq_high	= 2149999,
-		.bandselect	= 0x80,
+		.freq_high	= 2150000,
 		.VCOdivider	= 2,
-		.VCOnumber	= 8,
-		.progdata	= (0 << 18) | (1 << 9) | 0x80,
+		.progdata	= (0 << 19) | (1 << 9) | 0x40,
 	},
 };
 
@@ -207,49 +190,44 @@ static struct {
 {
 	{0x00, 0x03}, /* Reset system */
 	{0x00, 0x00}, /* Clear reset */
-	{0x01, 0x3b}, /* Apply sensible defaults, from an i2c sniffer */
-	{0x03, 0x07},
-	{0x04, 0x10},
-	{0x05, 0x04},
-	{0x06, 0x31},
-	{0x0d, 0x02},
-	{0x0e, 0x03},
-	{0x0f, 0xfe},
-	{0x10, 0x01},
-	{0x14, 0x01},
-	{0x15, 0x98},
-	{0x16, 0x00},
-	{0x17, 0x01},
-	{0x1b, 0x05},
-	{0x1c, 0x80},
-	{0x1d, 0x00},
-	{0x1e, 0x00},
-	{0x20, 0x41},
-	{0x21, 0x15},
-	{0x27, 0x14},
-	{0x28, 0x46},
-	{0x29, 0x00},
-	{0x2a, 0xb0},
-	{0x2b, 0x73},
-	{0x2c, 0x00},
+	{0x03, 0x07}, /* QPSK, DVB, Auto Acquisition (default) */
+	{0x04, 0x10}, /* MPEG */
+	{0x05, 0x04}, /* MPEG */
+	{0x06, 0x31}, /* MPEG (default) */
+	{0x0b, 0x00}, /* Freq search start point (default) */
+	{0x0c, 0x00}, /* Demodulator sample gain (default) */
+	{0x0d, 0x02}, /* Frequency search range = Fsymbol / 4 (default) */
+	{0x0e, 0x03}, /* Default non-inverted, FEC 3/4 (default) */
+	{0x0f, 0xfe}, /* FEC search mask (all supported codes) */
+	{0x10, 0x01}, /* Default search inversion, no repeat (default) */
+	{0x16, 0x00}, /* Enable reading of frequency */
+	{0x17, 0x01}, /* Enable EsNO Ready Counter */
+	{0x1c, 0x80}, /* Enable error counter */
+	{0x20, 0x00}, /* Tuner burst clock rate = 500KHz */
+	{0x21, 0x15}, /* Tuner burst mode, word length = 0x15 */
+	{0x28, 0x00}, /* Enable FILTERV with positive pol., DiSEqC 2.x off */
+	{0x29, 0x00}, /* DiSEqC LNB_DC off */
+	{0x2a, 0xb0}, /* DiSEqC Parameters (default) */
+	{0x2b, 0x73}, /* DiSEqC Tone Frequency (default) */
+	{0x2c, 0x00}, /* DiSEqC Message (0x2c - 0x31) */
 	{0x2d, 0x00},
 	{0x2e, 0x00},
 	{0x2f, 0x00},
 	{0x30, 0x00},
 	{0x31, 0x00},
-	{0x32, 0x8c},
-	{0x33, 0x00},
+	{0x32, 0x8c}, /* DiSEqC Parameters (default) */
+	{0x33, 0x00}, /* Interrupts off (0x33 - 0x34) */
 	{0x34, 0x00},
-	{0x35, 0x03},
-	{0x36, 0x02},
-	{0x37, 0x3a},
-	{0x3a, 0x00},	/* Enable AGC accumulator */
-	{0x44, 0x00},
-	{0x45, 0x00},
-	{0x46, 0x05},
-	{0x56, 0x41},
-	{0x57, 0xff},
-	{0x67, 0x83},
+	{0x35, 0x03}, /* DiSEqC Tone Amplitude (default) */
+	{0x36, 0x02}, /* DiSEqC Parameters (default) */
+	{0x37, 0x3a}, /* DiSEqC Parameters (default) */
+	{0x3a, 0x00}, /* Enable AGC accumulator (for signal strength) */
+	{0x44, 0x00}, /* Constellation (default) */
+	{0x45, 0x00}, /* Symbol count (default) */
+	{0x46, 0x0d}, /* Symbol rate estimator on (default) */
+	{0x56, 0x41}, /* Various (default) */
+	{0x57, 0xff}, /* Error Counter Window (default) */
+	{0x67, 0x83}, /* Non-DCII symbol clock */
 };
 
 static int cx24123_writereg(struct cx24123_state* state, int reg, int data)
@@ -258,6 +236,10 @@ static int cx24123_writereg(struct cx24123_state* state, int reg, int data)
 	struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf, .len = 2 };
 	int err;
 
+	if (debug>1)
+		printk("cx24123: %s:  write reg 0x%02x, value 0x%02x\n",
+						__FUNCTION__,reg, data);
+
 	if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) {
 		printk("%s: writereg error(err == %i, reg == 0x%02x,"
 			 " data == 0x%02x)\n", __FUNCTION__, err, reg, data);
@@ -274,6 +256,10 @@ static int cx24123_writelnbreg(struct cx24123_state* state, int reg, int data)
 	struct i2c_msg msg = { .addr = 0x08, .flags = 0, .buf = buf, .len = 2 };
 	int err;
 
+	if (debug>1)
+		printk("cx24123: %s:  writeln addr=0x08, reg 0x%02x, value 0x%02x\n",
+						__FUNCTION__,reg, data);
+
 	if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) {
 		printk("%s: writelnbreg error (err == %i, reg == 0x%02x,"
 			 " data == 0x%02x)\n", __FUNCTION__, err, reg, data);
@@ -303,6 +289,9 @@ static int cx24123_readreg(struct cx24123_state* state, u8 reg)
 		return ret;
 	}
 
+	if (debug>1)
+		printk("cx24123: read reg 0x%02x, value 0x%02x\n",reg, ret);
+
 	return b1[0];
 }
 
@@ -313,17 +302,23 @@ static int cx24123_readlnbreg(struct cx24123_state* state, u8 reg)
 
 static int cx24123_set_inversion(struct cx24123_state* state, fe_spectral_inversion_t inversion)
 {
+	u8 nom_reg = cx24123_readreg(state, 0x0e);
+	u8 auto_reg = cx24123_readreg(state, 0x10);
+
 	switch (inversion) {
 	case INVERSION_OFF:
-		cx24123_writereg(state, 0x0e, cx24123_readreg(state, 0x0e) & 0x7f);
-		cx24123_writereg(state, 0x10, cx24123_readreg(state, 0x10) | 0x80);
+		dprintk("%s:  inversion off\n",__FUNCTION__);
+		cx24123_writereg(state, 0x0e, nom_reg & ~0x80);
+		cx24123_writereg(state, 0x10, auto_reg | 0x80);
 		break;
 	case INVERSION_ON:
-		cx24123_writereg(state, 0x0e, cx24123_readreg(state, 0x0e) | 0x80);
-		cx24123_writereg(state, 0x10, cx24123_readreg(state, 0x10) | 0x80);
+		dprintk("%s:  inversion on\n",__FUNCTION__);
+		cx24123_writereg(state, 0x0e, nom_reg | 0x80);
+		cx24123_writereg(state, 0x10, auto_reg | 0x80);
 		break;
 	case INVERSION_AUTO:
-		cx24123_writereg(state, 0x10, cx24123_readreg(state, 0x10) & 0x7f);
+		dprintk("%s:  inversion auto\n",__FUNCTION__);
+		cx24123_writereg(state, 0x10, auto_reg & ~0x80);
 		break;
 	default:
 		return -EINVAL;
@@ -338,92 +333,191 @@ static int cx24123_get_inversion(struct cx24123_state* state, fe_spectral_invers
 
 	val = cx24123_readreg(state, 0x1b) >> 7;
 
-	if (val == 0)
+	if (val == 0) {
+		dprintk("%s:  read inversion off\n",__FUNCTION__);
 		*inversion = INVERSION_OFF;
-	else
+	} else {
+		dprintk("%s:  read inversion on\n",__FUNCTION__);
 		*inversion = INVERSION_ON;
+	}
 
 	return 0;
 }
 
 static int cx24123_set_fec(struct cx24123_state* state, fe_code_rate_t fec)
 {
+	u8 nom_reg = cx24123_readreg(state, 0x0e) & ~0x07;
+
 	if ( (fec < FEC_NONE) || (fec > FEC_AUTO) )
 		fec = FEC_AUTO;
 
-	/* Hardware has 5/11 and 3/5 but are never unused */
 	switch (fec) {
-	case FEC_NONE:
-		return cx24123_writereg(state, 0x0f, 0x01);
 	case FEC_1_2:
-		return cx24123_writereg(state, 0x0f, 0x02);
+		dprintk("%s:  set FEC to 1/2\n",__FUNCTION__);
+		cx24123_writereg(state, 0x0e, nom_reg | 0x01);
+		cx24123_writereg(state, 0x0f, 0x02);
+		break;
 	case FEC_2_3:
-		return cx24123_writereg(state, 0x0f, 0x04);
+		dprintk("%s:  set FEC to 2/3\n",__FUNCTION__);
+		cx24123_writereg(state, 0x0e, nom_reg | 0x02);
+		cx24123_writereg(state, 0x0f, 0x04);
+		break;
 	case FEC_3_4:
-		return cx24123_writereg(state, 0x0f, 0x08);
+		dprintk("%s:  set FEC to 3/4\n",__FUNCTION__);
+		cx24123_writereg(state, 0x0e, nom_reg | 0x03);
+		cx24123_writereg(state, 0x0f, 0x08);
+		break;
+	case FEC_4_5:
+		dprintk("%s:  set FEC to 4/5\n",__FUNCTION__);
+		cx24123_writereg(state, 0x0e, nom_reg | 0x04);
+		cx24123_writereg(state, 0x0f, 0x10);
+		break;
 	case FEC_5_6:
-		return cx24123_writereg(state, 0x0f, 0x20);
+		dprintk("%s:  set FEC to 5/6\n",__FUNCTION__);
+		cx24123_writereg(state, 0x0e, nom_reg | 0x05);
+		cx24123_writereg(state, 0x0f, 0x20);
+		break;
+	case FEC_6_7:
+		dprintk("%s:  set FEC to 6/7\n",__FUNCTION__);
+		cx24123_writereg(state, 0x0e, nom_reg | 0x06);
+		cx24123_writereg(state, 0x0f, 0x40);
+		break;
 	case FEC_7_8:
-		return cx24123_writereg(state, 0x0f, 0x80);
+		dprintk("%s:  set FEC to 7/8\n",__FUNCTION__);
+		cx24123_writereg(state, 0x0e, nom_reg | 0x07);
+		cx24123_writereg(state, 0x0f, 0x80);
+		break;
 	case FEC_AUTO:
-		return cx24123_writereg(state, 0x0f, 0xae);
+		dprintk("%s:  set FEC to auto\n",__FUNCTION__);
+		cx24123_writereg(state, 0x0f, 0xfe);
+		break;
 	default:
 		return -EOPNOTSUPP;
 	}
+
+	return 0;
 }
 
 static int cx24123_get_fec(struct cx24123_state* state, fe_code_rate_t *fec)
 {
 	int ret;
-	u8 val;
 
 	ret = cx24123_readreg (state, 0x1b);
 	if (ret < 0)
 		return ret;
-	val = ret & 0x07;
-	switch (val) {
+	ret = ret & 0x07;
+
+	switch (ret) {
 	case 1:
 		*fec = FEC_1_2;
 		break;
-	case 3:
+	case 2:
 		*fec = FEC_2_3;
 		break;
-	case 4:
+	case 3:
 		*fec = FEC_3_4;
 		break;
-	case 5:
+	case 4:
 		*fec = FEC_4_5;
 		break;
-	case 6:
+	case 5:
 		*fec = FEC_5_6;
 		break;
+	case 6:
+		*fec = FEC_6_7;
+		break;
 	case 7:
 		*fec = FEC_7_8;
 		break;
-	case 2:	/* *fec = FEC_3_5; break; */
-	case 0:	/* *fec = FEC_5_11; break; */
-		*fec = FEC_AUTO;
-		break;
 	default:
-		*fec = FEC_NONE; // can't happen
+		/* this can happen when there's no lock */
+		*fec = FEC_NONE;
 	}
 
 	return 0;
 }
 
-/* fixme: Symbol rates < 3MSps may not work because of precision loss */
+/* Approximation of closest integer of log2(a/b). It actually gives the
+   lowest integer i such that 2^i >= round(a/b) */
+static u32 cx24123_int_log2(u32 a, u32 b)
+{
+	u32 exp, nearest = 0;
+	u32 div = a / b;
+	if(a % b >= b / 2) ++div;
+	if(div < (1 << 31))
+	{
+		for(exp = 1; div > exp; nearest++)
+			exp += exp;
+	}
+	return nearest;
+}
+
 static int cx24123_set_symbolrate(struct cx24123_state* state, u32 srate)
 {
-	u32 val;
+	u32 tmp, sample_rate, ratio, sample_gain;
+	u8 pll_mult;
+
+	/*  check if symbol rate is within limits */
+	if ((srate > state->ops.info.symbol_rate_max) ||
+	    (srate < state->ops.info.symbol_rate_min))
+		return -EOPNOTSUPP;;
+
+	/* choose the sampling rate high enough for the required operation,
+	   while optimizing the power consumed by the demodulator */
+	if (srate < (XTAL*2)/2)
+		pll_mult = 2;
+	else if (srate < (XTAL*3)/2)
+		pll_mult = 3;
+	else if (srate < (XTAL*4)/2)
+		pll_mult = 4;
+	else if (srate < (XTAL*5)/2)
+		pll_mult = 5;
+	else if (srate < (XTAL*6)/2)
+		pll_mult = 6;
+	else if (srate < (XTAL*7)/2)
+		pll_mult = 7;
+	else if (srate < (XTAL*8)/2)
+		pll_mult = 8;
+	else
+		pll_mult = 9;
+
+
+	sample_rate = pll_mult * XTAL;
+
+	/*
+	    SYSSymbolRate[21:0] = (srate << 23) / sample_rate
+
+	    We have to use 32 bit unsigned arithmetic without precision loss.
+	    The maximum srate is 45000000 or 0x02AEA540. This number has
+	    only 6 clear bits on top, hence we can shift it left only 6 bits
+	    at a time. Borrowed from cx24110.c
+	*/
+
+	tmp = srate << 6;
+	ratio = tmp / sample_rate;
+
+	tmp = (tmp % sample_rate) << 6;
+	ratio = (ratio << 6) + (tmp / sample_rate);
+
+	tmp = (tmp % sample_rate) << 6;
+	ratio = (ratio << 6) + (tmp / sample_rate);
+
+	tmp = (tmp % sample_rate) << 5;
+	ratio = (ratio << 5) + (tmp / sample_rate);
+
+
+	cx24123_writereg(state, 0x01, pll_mult * 6);
 
-	val = (srate / 1185) * 100;
+	cx24123_writereg(state, 0x08, (ratio >> 16) & 0x3f );
+	cx24123_writereg(state, 0x09, (ratio >>  8) & 0xff );
+	cx24123_writereg(state, 0x0a, (ratio      ) & 0xff );
 
-	/* Compensate for scaling up, by removing 17 symbols per 1Msps */
-	val = val - (17 * (srate / 1000000));
+	/* also set the demodulator sample gain */
+	sample_gain = cx24123_int_log2(sample_rate, srate);
+	tmp = cx24123_readreg(state, 0x0c) & ~0xe0;
+	cx24123_writereg(state, 0x0c, tmp | sample_gain << 5);
 
-	cx24123_writereg(state, 0x08, (val >> 16) & 0xff );
-	cx24123_writereg(state, 0x09, (val >>  8) & 0xff );
-	cx24123_writereg(state, 0x0a, (val      ) & 0xff );
+	dprintk("%s: srate=%d, ratio=0x%08x, sample_rate=%i sample_gain=%d\n", __FUNCTION__, srate, ratio, sample_rate, sample_gain);
 
 	return 0;
 }
@@ -437,6 +531,9 @@ static int cx24123_pll_calculate(struct dvb_frontend* fe, struct dvb_frontend_pa
 	struct cx24123_state *state = fe->demodulator_priv;
 	u32 ndiv = 0, adiv = 0, vco_div = 0;
 	int i = 0;
+	int pump = 2;
+	int band = 0;
+	int num_bands = sizeof(cx24123_bandselect_vals) / sizeof(cx24123_bandselect_vals[0]);
 
 	/* Defaults for low freq, low rate */
 	state->VCAarg = cx24123_AGC_vals[0].VCAprogdata;
@@ -444,38 +541,49 @@ static int cx24123_pll_calculate(struct dvb_frontend* fe, struct dvb_frontend_pa
 	state->bandselectarg = cx24123_bandselect_vals[0].progdata;
 	vco_div = cx24123_bandselect_vals[0].VCOdivider;
 
-	/* For the given symbolerate, determine the VCA and VGA programming bits */
+	/* For the given symbol rate, determine the VCA, VGA and FILTUNE programming bits */
 	for (i = 0; i < sizeof(cx24123_AGC_vals) / sizeof(cx24123_AGC_vals[0]); i++)
 	{
 		if ((cx24123_AGC_vals[i].symbolrate_low <= p->u.qpsk.symbol_rate) &&
-				(cx24123_AGC_vals[i].symbolrate_high >= p->u.qpsk.symbol_rate) ) {
+		    (cx24123_AGC_vals[i].symbolrate_high >= p->u.qpsk.symbol_rate) ) {
 			state->VCAarg = cx24123_AGC_vals[i].VCAprogdata;
 			state->VGAarg = cx24123_AGC_vals[i].VGAprogdata;
+			state->FILTune = cx24123_AGC_vals[i].FILTune;
 		}
 	}
 
-	/* For the given frequency, determine the bandselect programming bits */
-	for (i = 0; i < sizeof(cx24123_bandselect_vals) / sizeof(cx24123_bandselect_vals[0]); i++)
+	/* determine the band to use */
+	if(force_band < 1 || force_band > num_bands)
 	{
-		if ((cx24123_bandselect_vals[i].freq_low <= p->frequency) &&
-				(cx24123_bandselect_vals[i].freq_high >= p->frequency) ) {
-			state->bandselectarg = cx24123_bandselect_vals[i].progdata;
-			vco_div = cx24123_bandselect_vals[i].VCOdivider;
+		for (i = 0; i < num_bands; i++)
+		{
+			if ((cx24123_bandselect_vals[i].freq_low <= p->frequency) &&
+			    (cx24123_bandselect_vals[i].freq_high >= p->frequency) )
+				band = i;
 		}
 	}
+	else
+		band = force_band - 1;
+
+	state->bandselectarg = cx24123_bandselect_vals[band].progdata;
+	vco_div = cx24123_bandselect_vals[band].VCOdivider;
+
+	/* determine the charge pump current */
+	if ( p->frequency < (cx24123_bandselect_vals[band].freq_low + cx24123_bandselect_vals[band].freq_high)/2 )
+		pump = 0x01;
+	else
+		pump = 0x02;
 
 	/* Determine the N/A dividers for the requested lband freq (in kHz). */
-	/* Note: 10111 (kHz) is the Crystal Freq and divider of 10. */
-	ndiv = ( ((p->frequency * vco_div) / (10111 / 10) / 2) / 32) & 0x1ff;
-	adiv = ( ((p->frequency * vco_div) / (10111 / 10) / 2) % 32) & 0x1f;
+	/* Note: the reference divider R=10, frequency is in KHz, XTAL is in Hz */
+	ndiv = ( ((p->frequency * vco_div * 10) / (2 * XTAL / 1000)) / 32) & 0x1ff;
+	adiv = ( ((p->frequency * vco_div * 10) / (2 * XTAL / 1000)) % 32) & 0x1f;
 
 	if (adiv == 0)
-		adiv++;
+		ndiv++;
 
-	/* determine the correct pll frequency values. */
-	/* Command 11, refdiv 11, cpump polarity 1, cpump current 3mA 10. */
-	state->pllarg = (3 << 19) | (3 << 17) | (1 << 16) | (2 << 14);
-	state->pllarg |= (ndiv << 5) | adiv;
+	/* control bits 11, refdiv 11, charge pump polarity 1, charge pump current, ndiv, adiv */
+	state->pllarg = (3 << 19) | (3 << 17) | (1 << 16) | (pump << 14) | (ndiv << 5) | adiv;
 
 	return 0;
 }
@@ -489,6 +597,8 @@ static int cx24123_pll_writereg(struct dvb_frontend* fe, struct dvb_frontend_par
 	struct cx24123_state *state = fe->demodulator_priv;
 	unsigned long timeout;
 
+	dprintk("%s:  pll writereg called, data=0x%08x\n",__FUNCTION__,data);
+
 	/* align the 21 bytes into to bit23 boundary */
 	data = data << 3;
 
@@ -538,6 +648,9 @@ static int cx24123_pll_writereg(struct dvb_frontend* fe, struct dvb_frontend_par
 static int cx24123_pll_tune(struct dvb_frontend* fe, struct dvb_frontend_parameters *p)
 {
 	struct cx24123_state *state = fe->demodulator_priv;
+	u8 val;
+
+	dprintk("frequency=%i\n", p->frequency);
 
 	if (cx24123_pll_calculate(fe, p) != 0) {
 		printk("%s: cx24123_pll_calcutate failed\n",__FUNCTION__);
@@ -552,6 +665,14 @@ static int cx24123_pll_tune(struct dvb_frontend* fe, struct dvb_frontend_paramet
 	cx24123_pll_writereg(fe, p, state->bandselectarg);
 	cx24123_pll_writereg(fe, p, state->pllarg);
 
+	/* set the FILTUNE voltage */
+	val = cx24123_readreg(state, 0x28) & ~0x3;
+	cx24123_writereg(state, 0x27, state->FILTune >> 2);
+	cx24123_writereg(state, 0x28, val | (state->FILTune & 0x3));
+
+	dprintk("%s:  pll tune VCA=%d, band=%d, pll=%d\n",__FUNCTION__,state->VCAarg,
+			state->bandselectarg,state->pllarg);
+
 	return 0;
 }
 
@@ -560,6 +681,8 @@ static int cx24123_initfe(struct dvb_frontend* fe)
 	struct cx24123_state *state = fe->demodulator_priv;
 	int i;
 
+	dprintk("%s:  init frontend\n",__FUNCTION__);
+
 	/* Configure the demod to a good set of defaults */
 	for (i = 0; i < sizeof(cx24123_regdata) / sizeof(cx24123_regdata[0]); i++)
 		cx24123_writereg(state, cx24123_regdata[i].reg, cx24123_regdata[i].data);
@@ -587,10 +710,13 @@ static int cx24123_set_voltage(struct dvb_frontend* fe, fe_sec_voltage_t voltage
 
 		switch (voltage) {
 		case SEC_VOLTAGE_13:
+			dprintk("%s:  isl6421 voltage = 13V\n",__FUNCTION__);
 			return cx24123_writelnbreg(state, 0x0, val & 0x32); /* V 13v */
 		case SEC_VOLTAGE_18:
+			dprintk("%s:  isl6421 voltage = 18V\n",__FUNCTION__);
 			return cx24123_writelnbreg(state, 0x0, val | 0x04); /* H 18v */
 		case SEC_VOLTAGE_OFF:
+			dprintk("%s:  isl5421 voltage off\n",__FUNCTION__);
 			return cx24123_writelnbreg(state, 0x0, val & 0x30);
 		default:
 			return -EINVAL;
@@ -624,13 +750,93 @@ static int cx24123_set_voltage(struct dvb_frontend* fe, fe_sec_voltage_t voltage
 	return 0;
 }
 
-static int cx24123_send_diseqc_msg(struct dvb_frontend* fe,
-				   struct dvb_diseqc_master_cmd *cmd)
+/* wait for diseqc queue to become ready (or timeout) */
+static void cx24123_wait_for_diseqc(struct cx24123_state *state)
+{
+	unsigned long timeout = jiffies + msecs_to_jiffies(200);
+	while (!(cx24123_readreg(state, 0x29) & 0x40)) {
+		if(time_after(jiffies, timeout)) {
+			printk("%s: diseqc queue not ready, command may be lost.\n", __FUNCTION__);
+			break;
+		}
+		msleep(10);
+	}
+}
+
+static int cx24123_send_diseqc_msg(struct dvb_frontend* fe, struct dvb_diseqc_master_cmd *cmd)
 {
-	/* fixme: Implement diseqc */
-	printk("%s: No support yet\n",__FUNCTION__);
+	struct cx24123_state *state = fe->demodulator_priv;
+	int i, val;
+
+	dprintk("%s:\n",__FUNCTION__);
+
+	/* check if continuous tone has been stopped */
+	if (state->config->use_isl6421)
+		val = cx24123_readlnbreg(state, 0x00) & 0x10;
+	else
+		val = cx24123_readreg(state, 0x29) & 0x10;
 
-	return -ENOTSUPP;
+
+	if (val) {
+		printk("%s: ERROR: attempt to send diseqc command before tone is off\n", __FUNCTION__);
+		return -ENOTSUPP;
+	}
+
+	/* wait for diseqc queue ready */
+	cx24123_wait_for_diseqc(state);
+
+	/* select tone mode */
+	cx24123_writereg(state, 0x2a, cx24123_readreg(state, 0x2a) & 0xf8);
+
+	for (i = 0; i < cmd->msg_len; i++)
+		cx24123_writereg(state, 0x2C + i, cmd->msg[i]);
+
+	val = cx24123_readreg(state, 0x29);
+	cx24123_writereg(state, 0x29, ((val & 0x90) | 0x40) | ((cmd->msg_len-3) & 3));
+
+	/* wait for diseqc message to finish sending */
+	cx24123_wait_for_diseqc(state);
+
+	return 0;
+}
+
+static int cx24123_diseqc_send_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t burst)
+{
+	struct cx24123_state *state = fe->demodulator_priv;
+	int val;
+
+	dprintk("%s:\n", __FUNCTION__);
+
+	/* check if continuous tone has been stoped */
+	if (state->config->use_isl6421)
+		val = cx24123_readlnbreg(state, 0x00) & 0x10;
+	else
+		val = cx24123_readreg(state, 0x29) & 0x10;
+
+
+	if (val) {
+		printk("%s: ERROR: attempt to send diseqc command before tone is off\n", __FUNCTION__);
+		return -ENOTSUPP;
+	}
+
+	cx24123_wait_for_diseqc(state);
+
+	/* select tone mode */
+	val = cx24123_readreg(state, 0x2a) & 0xf8;
+	cx24123_writereg(state, 0x2a, val | 0x04);
+
+	val = cx24123_readreg(state, 0x29);
+
+	if (burst == SEC_MINI_A)
+		cx24123_writereg(state, 0x29, ((val & 0x90) | 0x40 | 0x00));
+	else if (burst == SEC_MINI_B)
+		cx24123_writereg(state, 0x29, ((val & 0x90) | 0x40 | 0x08));
+	else
+		return -EINVAL;
+
+	cx24123_wait_for_diseqc(state);
+
+	return 0;
 }
 
 static int cx24123_read_status(struct dvb_frontend* fe, fe_status_t* status)
@@ -642,13 +848,15 @@ static int cx24123_read_status(struct dvb_frontend* fe, fe_status_t* status)
 
 	*status = 0;
 	if (lock & 0x01)
-		*status |= FE_HAS_CARRIER | FE_HAS_SIGNAL;
+		*status |= FE_HAS_SIGNAL;
+	if (sync & 0x02)
+		*status |= FE_HAS_CARRIER;
 	if (sync & 0x04)
 		*status |= FE_HAS_VITERBI;
 	if (sync & 0x08)
-		*status |= FE_HAS_CARRIER;
+		*status |= FE_HAS_SYNC;
 	if (sync & 0x80)
-		*status |= FE_HAS_SYNC | FE_HAS_LOCK;
+		*status |= FE_HAS_LOCK;
 
 	return 0;
 }
@@ -681,6 +889,8 @@ static int cx24123_read_ber(struct dvb_frontend* fe, u32* ber)
 	else
 		state->snr = 0;
 
+	dprintk("%s:  BER = %d, S/N index = %d\n",__FUNCTION__,state->lastber, state->snr);
+
 	*ber = state->lastber;
 
 	return 0;
@@ -691,6 +901,8 @@ static int cx24123_read_signal_strength(struct dvb_frontend* fe, u16* signal_str
 	struct cx24123_state *state = fe->demodulator_priv;
 	*signal_strength = cx24123_readreg(state, 0x3b) << 8; /* larger = better */
 
+	dprintk("%s:  Signal strength = %d\n",__FUNCTION__,*signal_strength);
+
 	return 0;
 }
 
@@ -699,6 +911,8 @@ static int cx24123_read_snr(struct dvb_frontend* fe, u16* snr)
 	struct cx24123_state *state = fe->demodulator_priv;
 	*snr = state->snr;
 
+	dprintk("%s:  read S/N index = %d\n",__FUNCTION__,*snr);
+
 	return 0;
 }
 
@@ -707,6 +921,8 @@ static int cx24123_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
 	struct cx24123_state *state = fe->demodulator_priv;
 	*ucblocks = state->lastber;
 
+	dprintk("%s:  ucblocks (ber) = %d\n",__FUNCTION__,*ucblocks);
+
 	return 0;
 }
 
@@ -714,6 +930,8 @@ static int cx24123_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_par
 {
 	struct cx24123_state *state = fe->demodulator_priv;
 
+	dprintk("%s:  set_frontend\n",__FUNCTION__);
+
 	if (state->config->set_ts_params)
 		state->config->set_ts_params(fe, 0);
 
@@ -737,6 +955,8 @@ static int cx24123_get_frontend(struct dvb_frontend* fe, struct dvb_frontend_par
 {
 	struct cx24123_state *state = fe->demodulator_priv;
 
+	dprintk("%s:  get_frontend\n",__FUNCTION__);
+
 	if (cx24123_get_inversion(state, &p->inversion) != 0) {
 		printk("%s: Failed to get inversion status\n",__FUNCTION__);
 		return -EREMOTEIO;
@@ -763,8 +983,10 @@ static int cx24123_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone)
 
 		switch (tone) {
 		case SEC_TONE_ON:
+			dprintk("%s:  isl6421 sec tone on\n",__FUNCTION__);
 			return cx24123_writelnbreg(state, 0x0, val | 0x10);
 		case SEC_TONE_OFF:
+			dprintk("%s:  isl6421 sec tone off\n",__FUNCTION__);
 			return cx24123_writelnbreg(state, 0x0, val & 0x2f);
 		default:
 			printk("%s: CASE reached default with tone=%d\n", __FUNCTION__, tone);
@@ -855,12 +1077,13 @@ static struct dvb_frontend_ops cx24123_ops = {
 		.frequency_min = 950000,
 		.frequency_max = 2150000,
 		.frequency_stepsize = 1011, /* kHz for QPSK frontends */
-		.frequency_tolerance = 29500,
+		.frequency_tolerance = 5000,
 		.symbol_rate_min = 1000000,
 		.symbol_rate_max = 45000000,
 		.caps = FE_CAN_INVERSION_AUTO |
 			FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
-			FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
+			FE_CAN_FEC_4_5 | FE_CAN_FEC_5_6 | FE_CAN_FEC_6_7 |
+			FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
 			FE_CAN_QPSK | FE_CAN_RECOVER
 	},
 
@@ -875,12 +1098,16 @@ static struct dvb_frontend_ops cx24123_ops = {
 	.read_snr = cx24123_read_snr,
 	.read_ucblocks = cx24123_read_ucblocks,
 	.diseqc_send_master_cmd = cx24123_send_diseqc_msg,
+	.diseqc_send_burst = cx24123_diseqc_send_burst,
 	.set_tone = cx24123_set_tone,
 	.set_voltage = cx24123_set_voltage,
 };
 
 module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
+MODULE_PARM_DESC(debug, "Activates frontend debugging (default:0)");
+
+module_param(force_band, int, 0644);
+MODULE_PARM_DESC(force_band, "Force a specific band select (1-9, default:off).");
 
 MODULE_DESCRIPTION("DVB Frontend module for Conexant cx24123/cx24109 hardware");
 MODULE_AUTHOR("Steven Toth");
diff --git a/drivers/media/dvb/frontends/dvb-pll.c b/drivers/media/dvb/frontends/dvb-pll.c
index b6e2c387a04c..791706ec1da3 100644
--- a/drivers/media/dvb/frontends/dvb-pll.c
+++ b/drivers/media/dvb/frontends/dvb-pll.c
@@ -235,8 +235,8 @@ struct dvb_pll_desc dvb_pll_tdvs_tua6034 = {
 	.max   = 863000000,
 	.count = 3,
 	.entries = {
-		{  160000000, 44000000, 62500, 0xce, 0x01 },
-		{  455000000, 44000000, 62500, 0xce, 0x02 },
+		{  165000000, 44000000, 62500, 0xce, 0x01 },
+		{  450000000, 44000000, 62500, 0xce, 0x02 },
 		{  999999999, 44000000, 62500, 0xce, 0x04 },
 	},
 };
diff --git a/drivers/media/dvb/pluto2/Kconfig b/drivers/media/dvb/pluto2/Kconfig
index 84f8f9f52869..7d8e6e87bdbb 100644
--- a/drivers/media/dvb/pluto2/Kconfig
+++ b/drivers/media/dvb/pluto2/Kconfig
@@ -1,7 +1,6 @@
 config DVB_PLUTO2
 	tristate "Pluto2 cards"
-	depends on DVB_CORE && PCI
-	select I2C
+	depends on DVB_CORE && PCI && I2C
 	select I2C_ALGOBIT
 	select DVB_TDA1004X
 	help
diff --git a/drivers/media/dvb/pluto2/Makefile b/drivers/media/dvb/pluto2/Makefile
index 86ca84b2be6e..ce6a9aaf937e 100644
--- a/drivers/media/dvb/pluto2/Makefile
+++ b/drivers/media/dvb/pluto2/Makefile
@@ -1,3 +1,3 @@
-obj-$(CONFIG_DVB_PLUTO2) = pluto2.o
+obj-$(CONFIG_DVB_PLUTO2) += pluto2.o
 
 EXTRA_CFLAGS = -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/
diff --git a/drivers/media/dvb/ttpci/Kconfig b/drivers/media/dvb/ttpci/Kconfig
index 5b2aadb8385c..b5ac7dfde52f 100644
--- a/drivers/media/dvb/ttpci/Kconfig
+++ b/drivers/media/dvb/ttpci/Kconfig
@@ -1,8 +1,7 @@
 config DVB_AV7110
 	tristate "AV7110 cards"
-	depends on DVB_CORE && PCI
+	depends on DVB_CORE && PCI && I2C && VIDEO_V4L1
 	select FW_LOADER
-	select VIDEO_DEV
 	select VIDEO_SAA7146_VV
 	select DVB_VES1820
 	select DVB_VES1X93
@@ -59,7 +58,7 @@ config DVB_AV7110_OSD
 
 config DVB_BUDGET
 	tristate "Budget cards"
-	depends on DVB_CORE && PCI
+	depends on DVB_CORE && PCI && I2C && VIDEO_V4L1
 	select VIDEO_SAA7146
 	select DVB_STV0299
 	select DVB_VES1X93
@@ -80,7 +79,7 @@ config DVB_BUDGET
 
 config DVB_BUDGET_CI
 	tristate "Budget cards with onboard CI connector"
-	depends on DVB_CORE && PCI
+	depends on DVB_CORE && PCI && I2C && VIDEO_V4L1
 	select VIDEO_SAA7146
 	select DVB_STV0297
 	select DVB_STV0299
@@ -100,8 +99,7 @@ config DVB_BUDGET_CI
 
 config DVB_BUDGET_AV
 	tristate "Budget cards with analog video inputs"
-	depends on DVB_CORE && PCI
-	select VIDEO_DEV
+	depends on DVB_CORE && PCI && I2C && VIDEO_V4L1
 	select VIDEO_SAA7146_VV
 	select DVB_STV0299
 	select DVB_TDA1004X
@@ -119,7 +117,7 @@ config DVB_BUDGET_AV
 
 config DVB_BUDGET_PATCH
 	tristate "AV7110 cards with Budget Patch"
-	depends on DVB_CORE && DVB_BUDGET
+	depends on DVB_CORE && DVB_BUDGET && VIDEO_V4L1
 	select DVB_AV7110
 	select DVB_STV0299
 	select DVB_VES1X93
diff --git a/drivers/media/dvb/ttpci/budget-av.c b/drivers/media/dvb/ttpci/budget-av.c
index 8efe3ce5f66c..8a7cd7d505cf 100644
--- a/drivers/media/dvb/ttpci/budget-av.c
+++ b/drivers/media/dvb/ttpci/budget-av.c
@@ -1190,8 +1190,6 @@ static int budget_av_attach(struct saa7146_dev *dev, struct saa7146_pci_extensio
 						SAA7146_HPS_SYNC_PORT_A);
 
 		saa7113_setinput(budget_av, 0);
-	} else {
-		ciintf_init(budget_av);
 	}
 
 	/* fixme: find some sane values here... */
@@ -1211,6 +1209,10 @@ static int budget_av_attach(struct saa7146_dev *dev, struct saa7146_pci_extensio
 	budget_av->budget.dvb_adapter.priv = budget_av;
 	frontend_init(budget_av);
 
+	if (!budget_av->has_saa7113) {
+		ciintf_init(budget_av);
+	}
+
 	return 0;
 }
 
diff --git a/drivers/media/dvb/ttpci/budget-ci.c b/drivers/media/dvb/ttpci/budget-ci.c
index 5f91036f5b87..e64a609cf4ff 100644
--- a/drivers/media/dvb/ttpci/budget-ci.c
+++ b/drivers/media/dvb/ttpci/budget-ci.c
@@ -71,6 +71,7 @@ struct budget_ci {
 	struct tasklet_struct msp430_irq_tasklet;
 	struct tasklet_struct ciintf_irq_tasklet;
 	int slot_status;
+	int ci_irq;
 	struct dvb_ca_en50221 ca;
 	char ir_dev_name[50];
 	u8 tuner_pll_address; /* used for philips_tdm1316l configs */
@@ -276,8 +277,10 @@ static int ciintf_slot_reset(struct dvb_ca_en50221 *ca, int slot)
 	if (slot != 0)
 		return -EINVAL;
 
-	// trigger on RISING edge during reset so we know when READY is re-asserted
-	saa7146_setgpio(saa, 0, SAA7146_GPIO_IRQHI);
+	if (budget_ci->ci_irq) {
+		// trigger on RISING edge during reset so we know when READY is re-asserted
+		saa7146_setgpio(saa, 0, SAA7146_GPIO_IRQHI);
+	}
 	budget_ci->slot_status = SLOTSTATUS_RESET;
 	ttpci_budget_debiwrite(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, 0, 1, 0);
 	msleep(1);
@@ -370,11 +373,50 @@ static void ciintf_interrupt(unsigned long data)
 	}
 }
 
+static int ciintf_poll_slot_status(struct dvb_ca_en50221 *ca, int slot, int open)
+{
+	struct budget_ci *budget_ci = (struct budget_ci *) ca->data;
+	unsigned int flags;
+
+	// ensure we don't get spurious IRQs during initialisation
+	if (!budget_ci->budget.ci_present)
+		return -EINVAL;
+
+	// read the CAM status
+	flags = ttpci_budget_debiread(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, 1, 0);
+	if (flags & CICONTROL_CAMDETECT) {
+		// mark it as present if it wasn't before
+		if (budget_ci->slot_status & SLOTSTATUS_NONE) {
+			budget_ci->slot_status = SLOTSTATUS_PRESENT;
+		}
+
+		// during a RESET, we check if we can read from IO memory to see when CAM is ready
+		if (budget_ci->slot_status & SLOTSTATUS_RESET) {
+			if (ciintf_read_attribute_mem(ca, slot, 0) == 0x1d) {
+				budget_ci->slot_status = SLOTSTATUS_READY;
+			}
+		}
+	} else {
+		budget_ci->slot_status = SLOTSTATUS_NONE;
+	}
+
+	if (budget_ci->slot_status != SLOTSTATUS_NONE) {
+		if (budget_ci->slot_status & SLOTSTATUS_READY) {
+			return DVB_CA_EN50221_POLL_CAM_PRESENT | DVB_CA_EN50221_POLL_CAM_READY;
+		}
+		return DVB_CA_EN50221_POLL_CAM_PRESENT;
+	}
+
+	return 0;
+}
+
 static int ciintf_init(struct budget_ci *budget_ci)
 {
 	struct saa7146_dev *saa = budget_ci->budget.dev;
 	int flags;
 	int result;
+	int ci_version;
+	int ca_flags;
 
 	memset(&budget_ci->ca, 0, sizeof(struct dvb_ca_en50221));
 
@@ -382,16 +424,29 @@ static int ciintf_init(struct budget_ci *budget_ci)
 	saa7146_write(saa, MC1, saa7146_read(saa, MC1) | (0x800 << 16) | 0x800);
 
 	// test if it is there
-	if ((ttpci_budget_debiread(&budget_ci->budget, DEBICICTL, DEBIADDR_CIVERSION, 1, 1, 0) & 0xa0) != 0xa0) {
+	ci_version = ttpci_budget_debiread(&budget_ci->budget, DEBICICTL, DEBIADDR_CIVERSION, 1, 1, 0);
+	if ((ci_version & 0xa0) != 0xa0) {
 		result = -ENODEV;
 		goto error;
 	}
+
 	// determine whether a CAM is present or not
 	flags = ttpci_budget_debiread(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, 1, 0);
 	budget_ci->slot_status = SLOTSTATUS_NONE;
 	if (flags & CICONTROL_CAMDETECT)
 		budget_ci->slot_status = SLOTSTATUS_PRESENT;
 
+	// version 0xa2 of the CI firmware doesn't generate interrupts
+	if (ci_version == 0xa2) {
+		ca_flags = 0;
+		budget_ci->ci_irq = 0;
+	} else {
+		ca_flags = DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE |
+				DVB_CA_EN50221_FLAG_IRQ_FR |
+				DVB_CA_EN50221_FLAG_IRQ_DA;
+		budget_ci->ci_irq = 1;
+	}
+
 	// register CI interface
 	budget_ci->ca.owner = THIS_MODULE;
 	budget_ci->ca.read_attribute_mem = ciintf_read_attribute_mem;
@@ -401,23 +456,27 @@ static int ciintf_init(struct budget_ci *budget_ci)
 	budget_ci->ca.slot_reset = ciintf_slot_reset;
 	budget_ci->ca.slot_shutdown = ciintf_slot_shutdown;
 	budget_ci->ca.slot_ts_enable = ciintf_slot_ts_enable;
+	budget_ci->ca.poll_slot_status = ciintf_poll_slot_status;
 	budget_ci->ca.data = budget_ci;
 	if ((result = dvb_ca_en50221_init(&budget_ci->budget.dvb_adapter,
 					  &budget_ci->ca,
-					  DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE |
-					  DVB_CA_EN50221_FLAG_IRQ_FR |
-					  DVB_CA_EN50221_FLAG_IRQ_DA, 1)) != 0) {
+					  ca_flags, 1)) != 0) {
 		printk("budget_ci: CI interface detected, but initialisation failed.\n");
 		goto error;
 	}
+
 	// Setup CI slot IRQ
-	tasklet_init(&budget_ci->ciintf_irq_tasklet, ciintf_interrupt, (unsigned long) budget_ci);
-	if (budget_ci->slot_status != SLOTSTATUS_NONE) {
-		saa7146_setgpio(saa, 0, SAA7146_GPIO_IRQLO);
-	} else {
-		saa7146_setgpio(saa, 0, SAA7146_GPIO_IRQHI);
+	if (budget_ci->ci_irq) {
+		tasklet_init(&budget_ci->ciintf_irq_tasklet, ciintf_interrupt, (unsigned long) budget_ci);
+		if (budget_ci->slot_status != SLOTSTATUS_NONE) {
+			saa7146_setgpio(saa, 0, SAA7146_GPIO_IRQLO);
+		} else {
+			saa7146_setgpio(saa, 0, SAA7146_GPIO_IRQHI);
+		}
+		saa7146_write(saa, IER, saa7146_read(saa, IER) | MASK_03);
 	}
-	saa7146_write(saa, IER, saa7146_read(saa, IER) | MASK_03);
+
+	// enable interface
 	ttpci_budget_debiwrite(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1,
 			       CICONTROL_RESET, 1, 0);
 
@@ -426,10 +485,12 @@ static int ciintf_init(struct budget_ci *budget_ci)
 	budget_ci->budget.ci_present = 1;
 
 	// forge a fake CI IRQ so the CAM state is setup correctly
-	flags = DVB_CA_EN50221_CAMCHANGE_REMOVED;
-	if (budget_ci->slot_status != SLOTSTATUS_NONE)
-		flags = DVB_CA_EN50221_CAMCHANGE_INSERTED;
-	dvb_ca_en50221_camchange_irq(&budget_ci->ca, 0, flags);
+	if (budget_ci->ci_irq) {
+		flags = DVB_CA_EN50221_CAMCHANGE_REMOVED;
+		if (budget_ci->slot_status != SLOTSTATUS_NONE)
+			flags = DVB_CA_EN50221_CAMCHANGE_INSERTED;
+		dvb_ca_en50221_camchange_irq(&budget_ci->ca, 0, flags);
+	}
 
 	return 0;
 
@@ -443,9 +504,13 @@ static void ciintf_deinit(struct budget_ci *budget_ci)
 	struct saa7146_dev *saa = budget_ci->budget.dev;
 
 	// disable CI interrupts
-	saa7146_write(saa, IER, saa7146_read(saa, IER) & ~MASK_03);
-	saa7146_setgpio(saa, 0, SAA7146_GPIO_INPUT);
-	tasklet_kill(&budget_ci->ciintf_irq_tasklet);
+	if (budget_ci->ci_irq) {
+		saa7146_write(saa, IER, saa7146_read(saa, IER) & ~MASK_03);
+		saa7146_setgpio(saa, 0, SAA7146_GPIO_INPUT);
+		tasklet_kill(&budget_ci->ciintf_irq_tasklet);
+	}
+
+	// reset interface
 	ttpci_budget_debiwrite(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, 0, 1, 0);
 	msleep(1);
 	ttpci_budget_debiwrite(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1,
@@ -473,7 +538,7 @@ static void budget_ci_irq(struct saa7146_dev *dev, u32 * isr)
 	if (*isr & MASK_10)
 		ttpci_budget_irq10_handler(dev, isr);
 
-	if ((*isr & MASK_03) && (budget_ci->budget.ci_present))
+	if ((*isr & MASK_03) && (budget_ci->budget.ci_present) && (budget_ci->ci_irq))
 		tasklet_schedule(&budget_ci->ciintf_irq_tasklet);
 }
 
diff --git a/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c b/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c
index 248fdc7accfb..6ceae38125c7 100644
--- a/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c
+++ b/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c
@@ -1507,7 +1507,11 @@ static int ttusb_probe(struct usb_interface *intf, const struct usb_device_id *i
 
 	mutex_unlock(&ttusb->semi2c);
 
-	dvb_register_adapter(&ttusb->adapter, "Technotrend/Hauppauge Nova-USB", THIS_MODULE);
+	if ((result = dvb_register_adapter(&ttusb->adapter, "Technotrend/Hauppauge Nova-USB", THIS_MODULE)) < 0) {
+		ttusb_free_iso_urbs(ttusb);
+		kfree(ttusb);
+		return result;
+	}
 	ttusb->adapter.priv = ttusb;
 
 	/* i2c */
diff --git a/drivers/media/radio/Kconfig b/drivers/media/radio/Kconfig
index d318be383de6..3fff75763693 100644
--- a/drivers/media/radio/Kconfig
+++ b/drivers/media/radio/Kconfig
@@ -7,7 +7,7 @@ menu "Radio Adapters"
 
 config RADIO_CADET
 	tristate "ADS Cadet AM/FM Tuner"
-	depends on ISA && VIDEO_DEV
+	depends on ISA && VIDEO_V4L1
 	---help---
 	  Choose Y here if you have one of these AM/FM radio cards, and then
 	  fill in the port address below.
@@ -25,7 +25,7 @@ config RADIO_CADET
 
 config RADIO_RTRACK
 	tristate "AIMSlab RadioTrack (aka RadioReveal) support"
-	depends on ISA && VIDEO_DEV
+	depends on ISA && VIDEO_V4L1
 	---help---
 	  Choose Y here if you have one of these FM radio cards, and then fill
 	  in the port address below.
@@ -59,7 +59,7 @@ config RADIO_RTRACK_PORT
 
 config RADIO_RTRACK2
 	tristate "AIMSlab RadioTrack II support"
-	depends on ISA && VIDEO_DEV
+	depends on ISA && VIDEO_V4L1
 	---help---
 	  Choose Y here if you have this FM radio card, and then fill in the
 	  port address below.
@@ -82,7 +82,7 @@ config RADIO_RTRACK2_PORT
 
 config RADIO_AZTECH
 	tristate "Aztech/Packard Bell Radio"
-	depends on ISA && VIDEO_DEV
+	depends on ISA && VIDEO_V4L1
 	---help---
 	  Choose Y here if you have one of these FM radio cards, and then fill
 	  in the port address below.
@@ -106,7 +106,7 @@ config RADIO_AZTECH_PORT
 
 config RADIO_GEMTEK
 	tristate "GemTek Radio Card support"
-	depends on ISA && VIDEO_DEV
+	depends on ISA && VIDEO_V4L1
 	---help---
 	  Choose Y here if you have this FM radio card, and then fill in the
 	  port address below.
@@ -131,7 +131,7 @@ config RADIO_GEMTEK_PORT
 
 config RADIO_GEMTEK_PCI
 	tristate "GemTek PCI Radio Card support"
-	depends on VIDEO_DEV && PCI
+	depends on VIDEO_V4L1 && PCI
 	---help---
 	  Choose Y here if you have this PCI FM radio card.
 
@@ -145,7 +145,7 @@ config RADIO_GEMTEK_PCI
 
 config RADIO_MAXIRADIO
 	tristate "Guillemot MAXI Radio FM 2000 radio"
-	depends on VIDEO_DEV && PCI
+	depends on VIDEO_V4L1 && PCI
 	---help---
 	  Choose Y here if you have this radio card.  This card may also be
 	  found as Gemtek PCI FM.
@@ -160,7 +160,7 @@ config RADIO_MAXIRADIO
 
 config RADIO_MAESTRO
 	tristate "Maestro on board radio"
-	depends on VIDEO_DEV
+	depends on VIDEO_V4L1
 	---help---
 	  Say Y here to directly support the on-board radio tuner on the
 	  Maestro 2 or 2E sound card.
@@ -175,7 +175,7 @@ config RADIO_MAESTRO
 
 config RADIO_MIROPCM20
 	tristate "miroSOUND PCM20 radio"
-	depends on ISA && VIDEO_DEV && SOUND_ACI_MIXER
+	depends on ISA && VIDEO_V4L1 && SOUND_ACI_MIXER
 	---help---
 	  Choose Y here if you have this FM radio card. You also need to say Y
 	  to "ACI mixer (miroSOUND PCM1-pro/PCM12/PCM20 radio)" (in "Sound")
@@ -208,7 +208,7 @@ config RADIO_MIROPCM20_RDS
 
 config RADIO_SF16FMI
 	tristate "SF16FMI Radio"
-	depends on ISA && VIDEO_DEV
+	depends on ISA && VIDEO_V4L1
 	---help---
 	  Choose Y here if you have one of these FM radio cards.  If you
 	  compile the driver into the kernel and your card is not PnP one, you
@@ -225,7 +225,7 @@ config RADIO_SF16FMI
 
 config RADIO_SF16FMR2
 	tristate "SF16FMR2 Radio"
-	depends on ISA && VIDEO_DEV
+	depends on ISA && VIDEO_V4L1
 	---help---
 	  Choose Y here if you have one of these FM radio cards.
 
@@ -239,7 +239,7 @@ config RADIO_SF16FMR2
 
 config RADIO_TERRATEC
 	tristate "TerraTec ActiveRadio ISA Standalone"
-	depends on ISA && VIDEO_DEV
+	depends on ISA && VIDEO_V4L1
 	---help---
 	  Choose Y here if you have this FM radio card, and then fill in the
 	  port address below. (TODO)
@@ -268,7 +268,7 @@ config RADIO_TERRATEC_PORT
 
 config RADIO_TRUST
 	tristate "Trust FM radio card"
-	depends on ISA && VIDEO_DEV
+	depends on ISA && VIDEO_V4L1
 	help
 	  This is a driver for the Trust FM radio cards. Say Y if you have
 	  such a card and want to use it under Linux.
@@ -286,7 +286,7 @@ config RADIO_TRUST_PORT
 
 config RADIO_TYPHOON
 	tristate "Typhoon Radio (a.k.a. EcoRadio)"
-	depends on ISA && VIDEO_DEV
+	depends on ISA && VIDEO_V4L1
 	---help---
 	  Choose Y here if you have one of these FM radio cards, and then fill
 	  in the port address and the frequency used for muting below.
@@ -330,7 +330,7 @@ config RADIO_TYPHOON_MUTEFREQ
 
 config RADIO_ZOLTRIX
 	tristate "Zoltrix Radio"
-	depends on ISA && VIDEO_DEV
+	depends on ISA && VIDEO_V4L1
 	---help---
 	  Choose Y here if you have one of these FM radio cards, and then fill
 	  in the port address below.
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index 85888a8a93c9..6b4197018561 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -2,10 +2,10 @@
 # Multimedia Video device configuration
 #
 
-menu "Video For Linux"
+menu "Video Capture Adapters"
 	depends on VIDEO_DEV
 
-comment "Video Adapters"
+comment "Video Capture Adapters"
 
 config VIDEO_ADV_DEBUG
 	bool "Enable advanced debug functionality"
@@ -16,11 +16,23 @@ config VIDEO_ADV_DEBUG
 	  V4L devices.
 	  In doubt, say N.
 
+config VIDEO_VIVI
+	tristate "Virtual Video Driver"
+	depends on VIDEO_V4L2 && !SPARC32 && !SPARC64
+	select VIDEO_BUF
+	default n
+	---help---
+	  Enables a virtual video driver. This device shows a color bar
+	  and a timestamp, as a real device would generate by using V4L2
+	  api.
+	  Say Y here if you want to test video apps or debug V4L devices.
+	  In doubt, say N.
+
 source "drivers/media/video/bt8xx/Kconfig"
 
 config VIDEO_SAA6588
 	tristate "SAA6588 Radio Chip RDS decoder support on BT848 cards"
-	depends on VIDEO_DEV && I2C && VIDEO_BT848
+	depends on I2C && VIDEO_BT848
 
 	help
 	  Support for  Radio Data System (RDS) decoder. This allows seeing
@@ -32,7 +44,7 @@ config VIDEO_SAA6588
 
 config VIDEO_PMS
 	tristate "Mediavision Pro Movie Studio Video For Linux"
-	depends on VIDEO_DEV && ISA
+	depends on ISA && VIDEO_V4L1
 	help
 	  Say Y if you have such a thing.
 
@@ -41,7 +53,7 @@ config VIDEO_PMS
 
 config VIDEO_PLANB
 	tristate "PlanB Video-In on PowerMac"
-	depends on PPC_PMAC && VIDEO_DEV && BROKEN
+	depends on PPC_PMAC && VIDEO_V4L1 && BROKEN
 	help
 	  PlanB is the V4L driver for the PowerMac 7x00/8x00 series video
 	  input hardware. If you want to experiment with this, say Y.
@@ -52,7 +64,7 @@ config VIDEO_PLANB
 
 config VIDEO_BWQCAM
 	tristate "Quickcam BW Video For Linux"
-	depends on VIDEO_DEV && PARPORT
+	depends on PARPORT && VIDEO_V4L1
 	help
 	  Say Y have if you the black and white version of the QuickCam
 	  camera. See the next option for the color version.
@@ -62,7 +74,7 @@ config VIDEO_BWQCAM
 
 config VIDEO_CQCAM
 	tristate "QuickCam Colour Video For Linux (EXPERIMENTAL)"
-	depends on EXPERIMENTAL && VIDEO_DEV && PARPORT
+	depends on EXPERIMENTAL && PARPORT && VIDEO_V4L1
 	help
 	  This is the video4linux driver for the colour version of the
 	  Connectix QuickCam.  If you have one of these cameras, say Y here,
@@ -73,7 +85,7 @@ config VIDEO_CQCAM
 
 config VIDEO_W9966
 	tristate "W9966CF Webcam (FlyCam Supra and others) Video For Linux"
-	depends on PARPORT_1284 && VIDEO_DEV && PARPORT
+	depends on PARPORT_1284 && PARPORT && VIDEO_V4L1
 	help
 	  Video4linux driver for Winbond's w9966 based Webcams.
 	  Currently tested with the LifeView FlyCam Supra.
@@ -86,7 +98,7 @@ config VIDEO_W9966
 
 config VIDEO_CPIA
 	tristate "CPiA Video For Linux"
-	depends on VIDEO_DEV
+	depends on VIDEO_V4L1
 	---help---
 	  This is the video4linux driver for cameras based on Vision's CPiA
 	  (Colour Processor Interface ASIC), such as the Creative Labs Video
@@ -123,7 +135,7 @@ source "drivers/media/video/cpia2/Kconfig"
 
 config VIDEO_SAA5246A
 	tristate "SAA5246A, SAA5281 Teletext processor"
-	depends on VIDEO_DEV && I2C
+	depends on I2C && VIDEO_V4L1
 	help
 	  Support for I2C bus based teletext using the SAA5246A or SAA5281
 	  chip. Useful only if you live in Europe.
@@ -150,7 +162,7 @@ config TUNER_3036
 
 config VIDEO_VINO
 	tristate "SGI Vino Video For Linux (EXPERIMENTAL)"
-	depends on VIDEO_DEV && I2C && SGI_IP22 && EXPERIMENTAL
+	depends on I2C && SGI_IP22 && EXPERIMENTAL && VIDEO_V4L1
 	select I2C_ALGO_SGI
 	help
 	  Say Y here to build in support for the Vino video input system found
@@ -158,7 +170,7 @@ config VIDEO_VINO
 
 config VIDEO_STRADIS
 	tristate "Stradis 4:2:2 MPEG-2 video driver  (EXPERIMENTAL)"
-	depends on EXPERIMENTAL && VIDEO_DEV && PCI
+	depends on EXPERIMENTAL && PCI && VIDEO_V4L1 && !PPC64
 	help
 	  Say Y here to enable support for the Stradis 4:2:2 MPEG-2 video
 	  driver for PCI.  There is a product page at
@@ -166,7 +178,7 @@ config VIDEO_STRADIS
 
 config VIDEO_ZORAN
 	tristate "Zoran ZR36057/36067 Video For Linux"
-	depends on VIDEO_DEV && PCI && I2C_ALGOBIT
+	depends on PCI && I2C_ALGOBIT && VIDEO_V4L1 && !PPC64
 	help
 	  Say Y for support for MJPEG capture cards based on the Zoran
 	  36057/36067 PCI controller chipset. This includes the Iomega
@@ -214,7 +226,7 @@ config VIDEO_ZORAN_LML33R10
 
 config VIDEO_ZR36120
 	tristate "Zoran ZR36120/36125 Video For Linux"
-	depends on VIDEO_DEV && PCI && I2C && BROKEN
+	depends on PCI && I2C && VIDEO_V4L1 && BROKEN
 	help
 	  Support for ZR36120/ZR36125 based frame grabber/overlay boards.
 	  This includes the Victor II, WaveWatcher, Video Wonder, Maxi-TV,
@@ -226,7 +238,7 @@ config VIDEO_ZR36120
 
 config VIDEO_MEYE
 	tristate "Sony Vaio Picturebook Motion Eye Video For Linux"
-	depends on VIDEO_DEV && PCI && SONYPI
+	depends on PCI && SONYPI && VIDEO_V4L1
 	---help---
 	  This is the video4linux driver for the Motion Eye camera found
 	  in the Vaio Picturebook laptops. Please read the material in
@@ -242,7 +254,7 @@ source "drivers/media/video/saa7134/Kconfig"
 
 config VIDEO_MXB
 	tristate "Siemens-Nixdorf 'Multimedia eXtension Board'"
-	depends on VIDEO_DEV && PCI
+	depends on PCI && VIDEO_V4L1
 	select VIDEO_SAA7146_VV
 	select VIDEO_TUNER
 	---help---
@@ -254,8 +266,9 @@ config VIDEO_MXB
 
 config VIDEO_DPC
 	tristate "Philips-Semiconductors 'dpc7146 demonstration board'"
-	depends on VIDEO_DEV && PCI
+	depends on PCI && VIDEO_V4L1
 	select VIDEO_SAA7146_VV
+	select VIDEO_V4L2
 	---help---
 	  This is a video4linux driver for the 'dpc7146 demonstration
 	  board' by Philips-Semiconductors. It's the reference design
@@ -268,8 +281,9 @@ config VIDEO_DPC
 
 config VIDEO_HEXIUM_ORION
 	tristate "Hexium HV-PCI6 and Orion frame grabber"
-	depends on VIDEO_DEV && PCI
+	depends on PCI && VIDEO_V4L1
 	select VIDEO_SAA7146_VV
+	select VIDEO_V4L2
 	---help---
 	  This is a video4linux driver for the Hexium HV-PCI6 and
 	  Orion frame grabber cards by Hexium.
@@ -279,8 +293,9 @@ config VIDEO_HEXIUM_ORION
 
 config VIDEO_HEXIUM_GEMINI
 	tristate "Hexium Gemini frame grabber"
-	depends on VIDEO_DEV && PCI
+	depends on PCI && VIDEO_V4L1
 	select VIDEO_SAA7146_VV
+	select VIDEO_V4L2
 	---help---
 	  This is a video4linux driver for the Hexium Gemini frame
 	  grabber card by Hexium. Please note that the Gemini Dual
@@ -293,7 +308,7 @@ source "drivers/media/video/cx88/Kconfig"
 
 config VIDEO_OVCAMCHIP
 	tristate "OmniVision Camera Chip support"
-	depends on VIDEO_DEV && I2C
+	depends on I2C && VIDEO_V4L1
 	---help---
 	  Support for the OmniVision OV6xxx and OV7xxx series of camera chips.
 	  This driver is intended to be used with the ov511 and w9968cf USB
@@ -304,7 +319,7 @@ config VIDEO_OVCAMCHIP
 
 config VIDEO_M32R_AR
 	tristate "AR devices"
-	depends on M32R
+	depends on M32R && VIDEO_V4L1
 	---help---
 	  This is a video4linux driver for the Renesas AR (Artificial Retina)
 	  camera module.
@@ -365,17 +380,17 @@ config VIDEO_WM8739
 source "drivers/media/video/cx25840/Kconfig"
 
 config VIDEO_SAA711X
-	tristate "Philips SAA7113/4/5 video decoders"
-	depends on VIDEO_DEV && I2C && EXPERIMENTAL
+	tristate "Philips SAA7113/4/5 video decoders (OBSOLETED)"
+	depends on VIDEO_V4L1 && I2C && EXPERIMENTAL
 	---help---
-	  Support for the Philips SAA7113/4/5 video decoders.
+	  Old support for the Philips SAA7113/4 video decoders.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called saa7115.
 
 config VIDEO_SAA7127
 	tristate "Philips SAA7127/9 digital video encoders"
-	depends on VIDEO_DEV && I2C && EXPERIMENTAL
+	depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
 	---help---
 	  Support for the Philips SAA7127/9 digital video encoders.
 
@@ -384,7 +399,7 @@ config VIDEO_SAA7127
 
 config VIDEO_UPD64031A
 	tristate "NEC Electronics uPD64031A Ghost Reduction"
-	depends on VIDEO_DEV && I2C && EXPERIMENTAL
+	depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
 	---help---
 	  Support for the NEC Electronics uPD64031A Ghost Reduction
 	  video chip. It is most often found in NTSC TV cards made for
@@ -396,7 +411,7 @@ config VIDEO_UPD64031A
 
 config VIDEO_UPD64083
 	tristate "NEC Electronics uPD64083 3-Dimensional Y/C separation"
-	depends on VIDEO_DEV && I2C && EXPERIMENTAL
+	depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
 	---help---
 	  Support for the NEC Electronics uPD64083 3-Dimensional Y/C
 	  separation video chip. It is used to improve the quality of
@@ -418,7 +433,7 @@ source "drivers/media/video/em28xx/Kconfig"
 
 config USB_DSBR
 	tristate "D-Link USB FM radio support (EXPERIMENTAL)"
-	depends on USB && VIDEO_DEV && EXPERIMENTAL
+	depends on USB && VIDEO_V4L1 && EXPERIMENTAL
 	---help---
 	  Say Y here if you want to connect this type of radio to your
 	  computer's USB port. Note that the audio is not digital, and
@@ -434,7 +449,7 @@ source "drivers/media/video/et61x251/Kconfig"
 
 config USB_OV511
 	tristate "USB OV511 Camera support"
-	depends on USB && VIDEO_DEV
+	depends on USB && VIDEO_V4L1
 	---help---
 	  Say Y here if you want to connect this type of camera to your
 	  computer's USB port. See <file:Documentation/video4linux/ov511.txt>
@@ -445,7 +460,7 @@ config USB_OV511
 
 config USB_SE401
 	tristate "USB SE401 Camera support"
-	depends on USB && VIDEO_DEV
+	depends on USB && VIDEO_V4L1
 	---help---
 	  Say Y here if you want to connect this type of camera to your
 	  computer's USB port. See <file:Documentation/video4linux/se401.txt>
@@ -458,7 +473,7 @@ source "drivers/media/video/sn9c102/Kconfig"
 
 config USB_STV680
 	tristate "USB STV680 (Pencam) Camera support"
-	depends on USB && VIDEO_DEV
+	depends on USB && VIDEO_V4L1
 	---help---
 	  Say Y here if you want to connect this type of camera to your
 	  computer's USB port. This includes the Pencam line of cameras.
@@ -470,7 +485,7 @@ config USB_STV680
 
 config USB_W9968CF
 	tristate "USB W996[87]CF JPEG Dual Mode Camera support"
-	depends on USB && VIDEO_DEV && I2C
+	depends on USB && VIDEO_V4L1 && I2C
 	select VIDEO_OVCAMCHIP
 	---help---
 	  Say Y here if you want support for cameras based on OV681 or
diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile
index b3ea2d63db9b..e5bf2687b76d 100644
--- a/drivers/media/video/Makefile
+++ b/drivers/media/video/Makefile
@@ -10,7 +10,11 @@ tuner-objs	:=	tuner-core.o tuner-types.o tuner-simple.o \
 
 msp3400-objs	:=	msp3400-driver.o msp3400-kthreads.o
 
-obj-$(CONFIG_VIDEO_DEV) += videodev.o v4l2-common.o v4l1-compat.o compat_ioctl32.o
+obj-$(CONFIG_VIDEO_DEV) += videodev.o v4l2-common.o compat_ioctl32.o
+
+ifeq ($(CONFIG_VIDEO_V4L1_COMPAT),y)
+  obj-$(CONFIG_VIDEO_DEV) += v4l1-compat.o
+endif
 
 obj-$(CONFIG_VIDEO_BT848) += bt8xx/
 obj-$(CONFIG_VIDEO_BT848) += tvaudio.o tda7432.o tda9875.o ir-kbd-i2c.o
@@ -84,4 +88,8 @@ obj-$(CONFIG_USB_IBMCAM)        += usbvideo/
 obj-$(CONFIG_USB_KONICAWC)      += usbvideo/
 obj-$(CONFIG_USB_VICAM)         += usbvideo/
 
+obj-$(CONFIG_VIDEO_VIVI) += vivi.o
+
 EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core
+extra-cflags-$(CONFIG_VIDEO_V4L1_COMPAT) += -DCONFIG_VIDEO_V4L1_COMPAT
+
diff --git a/drivers/media/video/bt8xx/Kconfig b/drivers/media/video/bt8xx/Kconfig
index 085477c12612..153f6a4a96c9 100644
--- a/drivers/media/video/bt8xx/Kconfig
+++ b/drivers/media/video/bt8xx/Kconfig
@@ -1,6 +1,6 @@
 config VIDEO_BT848
 	tristate "BT848 Video For Linux"
-	depends on VIDEO_DEV && PCI && I2C
+	depends on VIDEO_DEV && PCI && I2C && VIDEO_V4L2
 	select I2C_ALGOBIT
 	select FW_LOADER
 	select VIDEO_BTCX
diff --git a/drivers/media/video/bt8xx/Makefile b/drivers/media/video/bt8xx/Makefile
index db641a36b197..a096a03418aa 100644
--- a/drivers/media/video/bt8xx/Makefile
+++ b/drivers/media/video/bt8xx/Makefile
@@ -8,5 +8,5 @@ bttv-objs      :=      bttv-driver.o bttv-cards.o bttv-if.o \
 
 obj-$(CONFIG_VIDEO_BT848) += bttv.o
 
-EXTRA_CFLAGS += -I$(src)/..
+EXTRA_CFLAGS += -Idrivers/media/video
 EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core
diff --git a/drivers/media/video/bt8xx/bttv-cards.c b/drivers/media/video/bt8xx/bttv-cards.c
index f209a7492051..2b64aa835b42 100644
--- a/drivers/media/video/bt8xx/bttv-cards.c
+++ b/drivers/media/video/bt8xx/bttv-cards.c
@@ -2991,13 +2991,13 @@ void __devinit bttv_idcard(struct bttv *btv)
 
 	if (UNSET != audiomux[0]) {
 		gpiobits = 0;
-		for (i = 0; i < 5; i++) {
+		for (i = 0; i < 4; i++) {
 			bttv_tvcards[btv->c.type].gpiomux[i] = audiomux[i];
 			gpiobits |= audiomux[i];
 		}
 	} else {
 		gpiobits = audioall;
-		for (i = 0; i < 5; i++) {
+		for (i = 0; i < 4; i++) {
 			bttv_tvcards[btv->c.type].gpiomux[i] = audioall;
 		}
 	}
diff --git a/drivers/media/video/bt8xx/bttv-risc.c b/drivers/media/video/bt8xx/bttv-risc.c
index 16323a5d68ac..afcfe71e3792 100644
--- a/drivers/media/video/bt8xx/bttv-risc.c
+++ b/drivers/media/video/bt8xx/bttv-risc.c
@@ -233,7 +233,7 @@ bttv_risc_overlay(struct bttv *btv, struct btcx_riscmem *risc,
 		  const struct bttv_format *fmt, struct bttv_overlay *ov,
 		  int skip_even, int skip_odd)
 {
-	int instructions,rc,line,maxy,start,end,skip,nskips;
+	int dwords,rc,line,maxy,start,end,skip,nskips;
 	struct btcx_skiplist *skips;
 	u32 *rp,ri,ra;
 	u32 addr;
@@ -242,12 +242,12 @@ bttv_risc_overlay(struct bttv *btv, struct btcx_riscmem *risc,
 	if (NULL == (skips = kmalloc(sizeof(*skips) * ov->nclips,GFP_KERNEL)))
 		return -ENOMEM;
 
-	/* estimate risc mem: worst case is (clip+1) * lines instructions
+	/* estimate risc mem: worst case is (1.5*clip+1) * lines instructions
 	   + sync + jump (all 2 dwords) */
-	instructions  = (ov->nclips + 1) *
-		((skip_even || skip_odd) ? ov->w.height>>1 :  ov->w.height);
-	instructions += 2;
-	if ((rc = btcx_riscmem_alloc(btv->c.pci,risc,instructions*8)) < 0) {
+	dwords  = (3 * ov->nclips + 2) *
+		((skip_even || skip_odd) ? (ov->w.height+1)>>1 :  ov->w.height);
+	dwords += 4;
+	if ((rc = btcx_riscmem_alloc(btv->c.pci,risc,dwords*4)) < 0) {
 		kfree(skips);
 		return rc;
 	}
@@ -276,8 +276,6 @@ bttv_risc_overlay(struct bttv *btv, struct btcx_riscmem *risc,
 		if (line > maxy)
 			btcx_calc_skips(line, ov->w.width, &maxy,
 					skips, &nskips, ov->clips, ov->nclips);
-		else
-			nskips = 0;
 
 		/* write out risc code */
 		for (start = 0, skip = 0; start < ov->w.width; start = end) {
diff --git a/drivers/media/video/cx25840/cx25840-firmware.c b/drivers/media/video/cx25840/cx25840-firmware.c
index f59ced181c55..1958d4016ea1 100644
--- a/drivers/media/video/cx25840/cx25840-firmware.c
+++ b/drivers/media/video/cx25840/cx25840-firmware.c
@@ -39,29 +39,12 @@
 
 #define FWDEV(x) &((x)->adapter->dev)
 
-static int fastfw = 1;
 static char *firmware = FWFILE;
 
-module_param(fastfw, bool, 0444);
 module_param(firmware, charp, 0444);
 
-MODULE_PARM_DESC(fastfw, "Load firmware fast [0=100MHz 1=333MHz (default)]");
 MODULE_PARM_DESC(firmware, "Firmware image [default: " FWFILE "]");
 
-static void set_i2c_delay(struct i2c_client *client, int delay)
-{
-	struct i2c_algo_bit_data *algod = client->adapter->algo_data;
-
-	/* We aren't guaranteed to be using algo_bit,
-	 * so avoid the null pointer dereference
-	 * and disable the 'fast firmware load' */
-	if (algod) {
-		algod->udelay = delay;
-	} else {
-		fastfw = 0;
-	}
-}
-
 static void start_fw_load(struct i2c_client *client)
 {
 	/* DL_ADDR_LB=0 DL_ADDR_HB=0 */
@@ -71,16 +54,10 @@ static void start_fw_load(struct i2c_client *client)
 	cx25840_write(client, 0x803, 0x0b);
 	/* AUTO_INC_DIS=1 */
 	cx25840_write(client, 0x000, 0x20);
-
-	if (fastfw)
-		set_i2c_delay(client, 3);
 }
 
 static void end_fw_load(struct i2c_client *client)
 {
-	if (fastfw)
-		set_i2c_delay(client, 10);
-
 	/* AUTO_INC_DIS=0 */
 	cx25840_write(client, 0x000, 0x00);
 	/* DL_ENABLE=0 */
@@ -107,30 +84,8 @@ static int fw_write(struct i2c_client *client, u8 * data, int size)
 	int sent;
 
 	if ((sent = i2c_master_send(client, data, size)) < size) {
-
-		if (fastfw) {
-			v4l_err(client, "333MHz i2c firmware load failed\n");
-			fastfw = 0;
-			set_i2c_delay(client, 10);
-
-			if (sent > 2) {
-				u16 dl_addr = cx25840_read(client, 0x801) << 8;
-				dl_addr |= cx25840_read(client, 0x800);
-				dl_addr -= sent - 2;
-				cx25840_write(client, 0x801, dl_addr >> 8);
-				cx25840_write(client, 0x800, dl_addr & 0xff);
-			}
-
-			if (i2c_master_send(client, data, size) < size) {
-				v4l_err(client, "100MHz i2c firmware load failed\n");
-				return -ENOSYS;
-			}
-
-		} else {
-			v4l_err(client, "firmware load i2c failure\n");
-			return -ENOSYS;
-		}
-
+		v4l_err(client, "firmware load i2c failure\n");
+		return -ENOSYS;
 	}
 
 	return 0;
diff --git a/drivers/media/video/cx88/cx88-alsa.c b/drivers/media/video/cx88/cx88-alsa.c
index f9d87b86492c..320b3d9384ba 100644
--- a/drivers/media/video/cx88/cx88-alsa.c
+++ b/drivers/media/video/cx88/cx88-alsa.c
@@ -616,7 +616,7 @@ static struct snd_kcontrol_new snd_cx88_capture_volume = {
  * Only boards with eeprom and byte 1 at eeprom=1 have it
  */
 
-static struct pci_device_id cx88_audio_pci_tbl[] = {
+static struct pci_device_id cx88_audio_pci_tbl[] __devinitdata = {
 	{0x14f1,0x8801,PCI_ANY_ID,PCI_ANY_ID,0,0,0},
 	{0x14f1,0x8811,PCI_ANY_ID,PCI_ANY_ID,0,0,0},
 	{0, }
diff --git a/drivers/media/video/cx88/cx88-cards.c b/drivers/media/video/cx88/cx88-cards.c
index c7042cf41231..f80154b87d22 100644
--- a/drivers/media/video/cx88/cx88-cards.c
+++ b/drivers/media/video/cx88/cx88-cards.c
@@ -564,7 +564,7 @@ struct cx88_board cx88_boards[] = {
 	},
 	[CX88_BOARD_PCHDTV_HD3000] = {
 		.name           = "pcHDTV HD3000 HDTV",
-		.tuner_type     = TUNER_THOMSON_DTT7610,
+		.tuner_type     = TUNER_THOMSON_DTT761X,
 		.radio_type     = UNSET,
 		.tuner_addr	= ADDR_UNSET,
 		.radio_addr	= ADDR_UNSET,
diff --git a/drivers/media/video/cx88/cx88-core.c b/drivers/media/video/cx88/cx88-core.c
index 2c3d9f1999be..e1092d5d4628 100644
--- a/drivers/media/video/cx88/cx88-core.c
+++ b/drivers/media/video/cx88/cx88-core.c
@@ -146,9 +146,11 @@ int cx88_risc_buffer(struct pci_dev *pci, struct btcx_riscmem *risc,
 		fields++;
 
 	/* estimate risc mem: worst case is one write per page border +
-	   one write per scan line + syncs + jump (all 2 dwords) */
-	instructions  = (bpl * lines * fields) / PAGE_SIZE + lines * fields;
-	instructions += 3 + 4;
+	   one write per scan line + syncs + jump (all 2 dwords).  Padding
+	   can cause next bpl to start close to a page border.  First DMA
+	   region may be smaller than PAGE_SIZE */
+	instructions  = fields * (1 + ((bpl + padding) * lines) / PAGE_SIZE + lines);
+	instructions += 2;
 	if ((rc = btcx_riscmem_alloc(pci,risc,instructions*8)) < 0)
 		return rc;
 
@@ -176,9 +178,11 @@ int cx88_risc_databuffer(struct pci_dev *pci, struct btcx_riscmem *risc,
 	int rc;
 
 	/* estimate risc mem: worst case is one write per page border +
-	   one write per scan line + syncs + jump (all 2 dwords) */
-	instructions  = (bpl * lines) / PAGE_SIZE + lines;
-	instructions += 3 + 4;
+	   one write per scan line + syncs + jump (all 2 dwords).  Here
+	   there is no padding and no sync.  First DMA region may be smaller
+	   than PAGE_SIZE */
+	instructions  = 1 + (bpl * lines) / PAGE_SIZE + lines;
+	instructions += 1;
 	if ((rc = btcx_riscmem_alloc(pci,risc,instructions*8)) < 0)
 		return rc;
 
diff --git a/drivers/media/video/cx88/cx88-dvb.c b/drivers/media/video/cx88/cx88-dvb.c
index f0ea9b5cdbc2..3619a449aefd 100644
--- a/drivers/media/video/cx88/cx88-dvb.c
+++ b/drivers/media/video/cx88/cx88-dvb.c
@@ -372,7 +372,7 @@ static int or51132_set_ts_param(struct dvb_frontend* fe,
 static struct or51132_config pchdtv_hd3000 = {
 	.demod_address    = 0x15,
 	.pll_address      = 0x61,
-	.pll_desc         = &dvb_pll_thomson_dtt7610,
+	.pll_desc         = &dvb_pll_thomson_dtt761x,
 	.set_ts_params    = or51132_set_ts_param,
 };
 #endif
diff --git a/drivers/media/video/cx88/cx88-video.c b/drivers/media/video/cx88/cx88-video.c
index 72a417b31745..694d1d80ff3f 100644
--- a/drivers/media/video/cx88/cx88-video.c
+++ b/drivers/media/video/cx88/cx88-video.c
@@ -35,8 +35,10 @@
 #include "cx88.h"
 #include <media/v4l2-common.h>
 
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
 /* Include V4L1 specific functions. Should be removed soon */
 #include <linux/videodev.h>
+#endif
 
 MODULE_DESCRIPTION("v4l2 driver module for cx2388x based TV cards");
 MODULE_AUTHOR("Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]");
diff --git a/drivers/media/video/em28xx/Kconfig b/drivers/media/video/em28xx/Kconfig
index 5a793ae7cc23..dfb15bfb83dc 100644
--- a/drivers/media/video/em28xx/Kconfig
+++ b/drivers/media/video/em28xx/Kconfig
@@ -1,6 +1,6 @@
 config VIDEO_EM28XX
 	tristate "Empia EM2800/2820/2840 USB video capture support"
-	depends on VIDEO_DEV && USB && I2C
+	depends on VIDEO_V4L1 && USB && I2C
 	select VIDEO_BUF
 	select VIDEO_TUNER
 	select VIDEO_TVEEPROM
diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c
index ddc92cbb5276..cf7cdf9ef617 100644
--- a/drivers/media/video/em28xx/em28xx-video.c
+++ b/drivers/media/video/em28xx/em28xx-video.c
@@ -1576,8 +1576,8 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev,
 	errCode = em28xx_config(dev);
 	if (errCode) {
 		em28xx_errdev("error configuring device\n");
-		kfree(dev);
 		em28xx_devused&=~(1<<dev->devno);
+		kfree(dev);
 		return -ENOMEM;
 	}
 
@@ -1603,8 +1603,8 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev,
 	dev->vdev = video_device_alloc();
 	if (NULL == dev->vdev) {
 		em28xx_errdev("cannot allocate video_device.\n");
-		kfree(dev);
 		em28xx_devused&=~(1<<dev->devno);
+		kfree(dev);
 		return -ENOMEM;
 	}
 
@@ -1612,8 +1612,8 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev,
 	if (NULL == dev->vbi_dev) {
 		em28xx_errdev("cannot allocate video_device.\n");
 		kfree(dev->vdev);
-		kfree(dev);
 		em28xx_devused&=~(1<<dev->devno);
+		kfree(dev);
 		return -ENOMEM;
 	}
 
@@ -1650,8 +1650,8 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev,
 		mutex_unlock(&dev->lock);
 		list_del(&dev->devlist);
 		video_device_release(dev->vdev);
-		kfree(dev);
 		em28xx_devused&=~(1<<dev->devno);
+		kfree(dev);
 		return -ENODEV;
 	}
 
@@ -1662,8 +1662,8 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev,
 		list_del(&dev->devlist);
 		video_device_release(dev->vbi_dev);
 		video_device_release(dev->vdev);
-		kfree(dev);
 		em28xx_devused&=~(1<<dev->devno);
+		kfree(dev);
 		return -ENODEV;
 	} else {
 		printk("registered VBI\n");
diff --git a/drivers/media/video/et61x251/Kconfig b/drivers/media/video/et61x251/Kconfig
index 6c43a90c6569..c6bff705688d 100644
--- a/drivers/media/video/et61x251/Kconfig
+++ b/drivers/media/video/et61x251/Kconfig
@@ -1,6 +1,6 @@
 config USB_ET61X251
 	tristate "USB ET61X[12]51 PC Camera Controller support"
-	depends on USB && VIDEO_DEV
+	depends on USB && VIDEO_V4L1
 	---help---
 	  Say Y here if you want support for cameras based on Etoms ET61X151
 	  or ET61X251 PC Camera Controllers.
diff --git a/drivers/media/video/pwc/Kconfig b/drivers/media/video/pwc/Kconfig
index 86376556f108..53cbc950f95c 100644
--- a/drivers/media/video/pwc/Kconfig
+++ b/drivers/media/video/pwc/Kconfig
@@ -1,6 +1,6 @@
 config USB_PWC
 	tristate "USB Philips Cameras"
-	depends on USB && VIDEO_DEV
+	depends on USB && VIDEO_V4L1
 	---help---
 	  Say Y or M here if you want to use one of these Philips & OEM
 	  webcams:
diff --git a/drivers/media/video/pwc/Makefile b/drivers/media/video/pwc/Makefile
index 8326684f49f3..33d60126c024 100644
--- a/drivers/media/video/pwc/Makefile
+++ b/drivers/media/video/pwc/Makefile
@@ -1,20 +1,3 @@
-ifneq ($(KERNELRELEASE),)
-
 pwc-objs	:= pwc-if.o pwc-misc.o pwc-ctrl.o pwc-uncompress.o pwc-timon.o pwc-kiara.o
 
 obj-$(CONFIG_USB_PWC) += pwc.o
-
-else
-
-KDIR := /lib/modules/$(shell uname -r)/build
-PWD := $(shell pwd)
-
-default:
-	$(MAKE) -C $(KDIR) SUBDIRS=$(PWD) modules
-
-endif
-
-clean:
-	rm -f *.[oas] .*.flags *.ko .*.cmd .*.d .*.tmp *.mod.c
-	rm -rf .tmp_versions
-
diff --git a/drivers/media/video/saa7127.c b/drivers/media/video/saa7127.c
index 133f9e5252fe..c271e2e14105 100644
--- a/drivers/media/video/saa7127.c
+++ b/drivers/media/video/saa7127.c
@@ -142,6 +142,7 @@ struct i2c_reg_value {
 static const struct i2c_reg_value saa7129_init_config_extra[] = {
 	{ SAA7127_REG_OUTPUT_PORT_CONTROL, 		0x38 },
 	{ SAA7127_REG_VTRIG, 				0xfa },
+	{ 0, 0 }
 };
 
 static const struct i2c_reg_value saa7127_init_config_common[] = {
diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c
index e666a4465ca4..86eae3528330 100644
--- a/drivers/media/video/saa7134/saa7134-cards.c
+++ b/drivers/media/video/saa7134/saa7134-cards.c
@@ -3504,6 +3504,7 @@ int saa7134_board_init1(struct saa7134_dev *dev)
 		/* power-up tuner chip */
 		saa_andorl(SAA7134_GPIO_GPMODE0 >> 2,   0x00040000, 0x00040000);
 		saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x00040000, 0x00000000);
+		break;
 	case SAA7134_BOARD_PINNACLE_300I_DVBT_PAL:
 		/* this turns the remote control chip off to work around a bug in it */
 		saa_writeb(SAA7134_GPIO_GPMODE1, 0x80);
diff --git a/drivers/media/video/saa7134/saa7134-core.c b/drivers/media/video/saa7134/saa7134-core.c
index 13de05532e0a..f0c2111f14ad 100644
--- a/drivers/media/video/saa7134/saa7134-core.c
+++ b/drivers/media/video/saa7134/saa7134-core.c
@@ -548,6 +548,8 @@ static irqreturn_t saa7134_irq(int irq, void *dev_id, struct pt_regs *regs)
 		if (report & SAA7134_IRQ_REPORT_GPIO16) {
 			switch (dev->has_remote) {
 				case SAA7134_REMOTE_GPIO:
+					if (!dev->remote)
+						break;
 					if  (dev->remote->mask_keydown & 0x10000) {
 						saa7134_input_irq(dev);
 					}
@@ -564,6 +566,8 @@ static irqreturn_t saa7134_irq(int irq, void *dev_id, struct pt_regs *regs)
 		if (report & SAA7134_IRQ_REPORT_GPIO18) {
 			switch (dev->has_remote) {
 				case SAA7134_REMOTE_GPIO:
+					if (!dev->remote)
+						break;
 					if ((dev->remote->mask_keydown & 0x40000) ||
 					    (dev->remote->mask_keyup & 0x40000)) {
 						saa7134_input_irq(dev);
@@ -676,7 +680,7 @@ static int saa7134_hwinit2(struct saa7134_dev *dev)
 		SAA7134_IRQ2_INTE_PE      |
 		SAA7134_IRQ2_INTE_AR;
 
-	if (dev->has_remote == SAA7134_REMOTE_GPIO) {
+	if (dev->has_remote == SAA7134_REMOTE_GPIO && dev->remote) {
 		if (dev->remote->mask_keydown & 0x10000)
 			irq2_mask |= SAA7134_IRQ2_INTE_GPIO16;
 		else if (dev->remote->mask_keydown & 0x40000)
diff --git a/drivers/media/video/saa7134/saa7134-video.c b/drivers/media/video/saa7134/saa7134-video.c
index aeef80f88a6b..e4156ec9c6d7 100644
--- a/drivers/media/video/saa7134/saa7134-video.c
+++ b/drivers/media/video/saa7134/saa7134-video.c
@@ -31,8 +31,10 @@
 #include "saa7134.h"
 #include <media/v4l2-common.h>
 
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
 /* Include V4L1 specific functions. Should be removed soon */
 #include <linux/videodev.h>
+#endif
 
 /* ------------------------------------------------------------------ */
 
diff --git a/drivers/media/video/sn9c102/Kconfig b/drivers/media/video/sn9c102/Kconfig
index 55f2bc11964b..cf552e6b8ecf 100644
--- a/drivers/media/video/sn9c102/Kconfig
+++ b/drivers/media/video/sn9c102/Kconfig
@@ -1,6 +1,6 @@
 config USB_SN9C102
 	tristate "USB SN9C10x PC Camera Controller support"
-	depends on USB && VIDEO_DEV
+	depends on USB && VIDEO_V4L1
 	---help---
 	  Say Y here if you want support for cameras based on SONiX SN9C101,
 	  SN9C102 or SN9C103 PC Camera Controllers.
diff --git a/drivers/media/video/tuner-types.c b/drivers/media/video/tuner-types.c
index 72e0f01db563..a1ae036b44ec 100644
--- a/drivers/media/video/tuner-types.c
+++ b/drivers/media/video/tuner-types.c
@@ -877,8 +877,8 @@ static struct tuner_params tuner_philips_fmd1216me_mk3_params[] = {
 /* ------------ TUNER_LG_TDVS_H062F - INFINEON ATSC ------------ */
 
 static struct tuner_range tuner_tua6034_ntsc_ranges[] = {
-	{ 16 * 160.00 /*MHz*/, 0x8e, 0x01 },
-	{ 16 * 455.00 /*MHz*/, 0x8e, 0x02 },
+	{ 16 * 165.00 /*MHz*/, 0x8e, 0x01 },
+	{ 16 * 450.00 /*MHz*/, 0x8e, 0x02 },
 	{ 16 * 999.99        , 0x8e, 0x04 },
 };
 
diff --git a/drivers/media/video/tveeprom.c b/drivers/media/video/tveeprom.c
index 431c3e2f6c42..b463e996961a 100644
--- a/drivers/media/video/tveeprom.c
+++ b/drivers/media/video/tveeprom.c
@@ -218,7 +218,7 @@ hauppauge_tuner[] =
 	/* 110-119 */
 	{ TUNER_ABSENT,        "Thompson DTT75105"},
 	{ TUNER_ABSENT,        "Conexant_CX24109"},
-	{ TUNER_ABSENT,        "TCL M2523_5N_E"},
+	{ TUNER_TCL_2002N,     "TCL M2523_5N_E"},
 	{ TUNER_ABSENT,        "TCL M2523_3DB_E"},
 	{ TUNER_ABSENT,        "Philips 8275A"},
 	{ TUNER_ABSENT,        "Microtune MT2060"},
diff --git a/drivers/media/video/usbvideo/Kconfig b/drivers/media/video/usbvideo/Kconfig
index 08a5d20bb2c0..39269a2c5635 100644
--- a/drivers/media/video/usbvideo/Kconfig
+++ b/drivers/media/video/usbvideo/Kconfig
@@ -3,7 +3,7 @@ config VIDEO_USBVIDEO
 
 config USB_VICAM
 	tristate "USB 3com HomeConnect (aka vicam) support (EXPERIMENTAL)"
-	depends on USB && VIDEO_DEV && EXPERIMENTAL
+	depends on USB && VIDEO_V4L1 && EXPERIMENTAL
 	select VIDEO_USBVIDEO
 	---help---
 	  Say Y here if you have 3com homeconnect camera (vicam).
@@ -13,7 +13,7 @@ config USB_VICAM
 
 config USB_IBMCAM
 	tristate "USB IBM (Xirlink) C-it Camera support"
-	depends on USB && VIDEO_DEV
+	depends on USB && VIDEO_V4L1
 	select VIDEO_USBVIDEO
 	---help---
 	  Say Y here if you want to connect a IBM "C-It" camera, also known as
@@ -28,7 +28,7 @@ config USB_IBMCAM
 
 config USB_KONICAWC
 	tristate "USB Konica Webcam support"
-	depends on USB && VIDEO_DEV
+	depends on USB && VIDEO_V4L1
 	select VIDEO_USBVIDEO
 	---help---
 	  Say Y here if you want support for webcams based on a Konica
diff --git a/drivers/media/video/vivi.c b/drivers/media/video/vivi.c
index 5e813404d068..779db26771c0 100644
--- a/drivers/media/video/vivi.c
+++ b/drivers/media/video/vivi.c
@@ -26,6 +26,11 @@
 #include <linux/random.h>
 #include <linux/version.h>
 #include <linux/videodev2.h>
+#include <linux/dma-mapping.h>
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
+/* Include V4L1 specific functions. Should be removed soon */
+#include <linux/videodev.h>
+#endif
 #include <linux/interrupt.h>
 #include <media/video-buf.h>
 #include <media/v4l2-common.h>
diff --git a/drivers/media/video/zc0301/Kconfig b/drivers/media/video/zc0301/Kconfig
index c3bf886b80cd..115833e4f4dd 100644
--- a/drivers/media/video/zc0301/Kconfig
+++ b/drivers/media/video/zc0301/Kconfig
@@ -1,6 +1,6 @@
 config USB_ZC0301
 	tristate "USB ZC0301 Image Processor and Control Chip support"
-	depends on USB && VIDEO_DEV
+	depends on USB && VIDEO_V4L1
 	---help---
 	  Say Y here if you want support for cameras based on the ZC0301
 	  Image Processor and Control Chip.
diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c
index bb7ad4d0678a..164375eea896 100644
--- a/drivers/message/fusion/mptbase.c
+++ b/drivers/message/fusion/mptbase.c
@@ -1189,7 +1189,6 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id)
 	ioc->diagPending = 0;
 	spin_lock_init(&ioc->diagLock);
 	spin_lock_init(&ioc->fc_rescan_work_lock);
-	spin_lock_init(&ioc->fc_rport_lock);
 	spin_lock_init(&ioc->initializing_hba_lock);
 
 	/* Initialize the event logging.
@@ -1569,6 +1568,21 @@ mpt_resume(struct pci_dev *pdev)
 }
 #endif
 
+static int
+mpt_signal_reset(int index, MPT_ADAPTER *ioc, int reset_phase)
+{
+	if ((MptDriverClass[index] == MPTSPI_DRIVER &&
+	     ioc->bus_type != SPI) ||
+	    (MptDriverClass[index] == MPTFC_DRIVER &&
+	     ioc->bus_type != FC) ||
+	    (MptDriverClass[index] == MPTSAS_DRIVER &&
+	     ioc->bus_type != SAS))
+		/* make sure we only call the relevant reset handler
+		 * for the bus */
+		return 0;
+	return (MptResetHandlers[index])(ioc, reset_phase);
+}
+
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 /*
  *	mpt_do_ioc_recovery - Initialize or recover MPT adapter.
@@ -1892,14 +1906,14 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag)
 			if ((ret == 0) && MptResetHandlers[ii]) {
 				dprintk((MYIOC_s_INFO_FMT "Calling IOC post_reset handler #%d\n",
 						ioc->name, ii));
-				rc += (*(MptResetHandlers[ii]))(ioc, MPT_IOC_POST_RESET);
+				rc += mpt_signal_reset(ii, ioc, MPT_IOC_POST_RESET);
 				handlers++;
 			}
 
 			if (alt_ioc_ready && MptResetHandlers[ii]) {
 				drsprintk((MYIOC_s_INFO_FMT "Calling alt-%s post_reset handler #%d\n",
 						ioc->name, ioc->alt_ioc->name, ii));
-				rc += (*(MptResetHandlers[ii]))(ioc->alt_ioc, MPT_IOC_POST_RESET);
+				rc += mpt_signal_reset(ii, ioc->alt_ioc, MPT_IOC_POST_RESET);
 				handlers++;
 			}
 		}
@@ -3280,11 +3294,11 @@ mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag)
 				if (MptResetHandlers[ii]) {
 					dprintk((MYIOC_s_INFO_FMT "Calling IOC pre_reset handler #%d\n",
 							ioc->name, ii));
-					r += (*(MptResetHandlers[ii]))(ioc, MPT_IOC_PRE_RESET);
+					r += mpt_signal_reset(ii, ioc, MPT_IOC_PRE_RESET);
 					if (ioc->alt_ioc) {
 						dprintk((MYIOC_s_INFO_FMT "Calling alt-%s pre_reset handler #%d\n",
 								ioc->name, ioc->alt_ioc->name, ii));
-						r += (*(MptResetHandlers[ii]))(ioc->alt_ioc, MPT_IOC_PRE_RESET);
+						r += mpt_signal_reset(ii, ioc->alt_ioc, MPT_IOC_PRE_RESET);
 					}
 				}
 			}
@@ -5719,11 +5733,11 @@ mpt_HardResetHandler(MPT_ADAPTER *ioc, int sleepFlag)
 			if (MptResetHandlers[ii]) {
 				dtmprintk((MYIOC_s_INFO_FMT "Calling IOC reset_setup handler #%d\n",
 						ioc->name, ii));
-				r += (*(MptResetHandlers[ii]))(ioc, MPT_IOC_SETUP_RESET);
+				r += mpt_signal_reset(ii, ioc, MPT_IOC_SETUP_RESET);
 				if (ioc->alt_ioc) {
 					dtmprintk((MYIOC_s_INFO_FMT "Calling alt-%s setup reset handler #%d\n",
 							ioc->name, ioc->alt_ioc->name, ii));
-					r += (*(MptResetHandlers[ii]))(ioc->alt_ioc, MPT_IOC_SETUP_RESET);
+					r += mpt_signal_reset(ii, ioc->alt_ioc, MPT_IOC_SETUP_RESET);
 				}
 			}
 		}
@@ -5748,11 +5762,13 @@ mpt_HardResetHandler(MPT_ADAPTER *ioc, int sleepFlag)
 	return rc;
 }
 
+# define EVENT_DESCR_STR_SZ		100
+
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 static void
 EventDescriptionStr(u8 event, u32 evData0, char *evStr)
 {
-	char *ds;
+	char *ds = NULL;
 
 	switch(event) {
 	case MPI_EVENT_NONE:
@@ -5789,9 +5805,9 @@ EventDescriptionStr(u8 event, u32 evData0, char *evStr)
 		if (evData0 == MPI_EVENT_LOOP_STATE_CHANGE_LIP)
 			ds = "Loop State(LIP) Change";
 		else if (evData0 == MPI_EVENT_LOOP_STATE_CHANGE_LPE)
-			ds = "Loop State(LPE) Change";			/* ??? */
+			ds = "Loop State(LPE) Change";		/* ??? */
 		else
-			ds = "Loop State(LPB) Change";			/* ??? */
+			ds = "Loop State(LPB) Change";		/* ??? */
 		break;
 	case MPI_EVENT_LOGOUT:
 		ds = "Logout";
@@ -5853,27 +5869,32 @@ EventDescriptionStr(u8 event, u32 evData0, char *evStr)
 		break;
 	case MPI_EVENT_SAS_DEVICE_STATUS_CHANGE:
 	{
-		char buf[50];
 		u8 id = (u8)(evData0);
 		u8 ReasonCode = (u8)(evData0 >> 16);
 		switch (ReasonCode) {
 		case MPI_EVENT_SAS_DEV_STAT_RC_ADDED:
-			sprintf(buf,"SAS Device Status Change: Added: id=%d", id);
+			snprintf(evStr, EVENT_DESCR_STR_SZ,
+			    "SAS Device Status Change: Added: id=%d", id);
 			break;
 		case MPI_EVENT_SAS_DEV_STAT_RC_NOT_RESPONDING:
-			sprintf(buf,"SAS Device Status Change: Deleted: id=%d", id);
+			snprintf(evStr, EVENT_DESCR_STR_SZ,
+			    "SAS Device Status Change: Deleted: id=%d", id);
 			break;
 		case MPI_EVENT_SAS_DEV_STAT_RC_SMART_DATA:
-			sprintf(buf,"SAS Device Status Change: SMART Data: id=%d", id);
+			snprintf(evStr, EVENT_DESCR_STR_SZ,
+			    "SAS Device Status Change: SMART Data: id=%d",
+			    id);
 			break;
 		case MPI_EVENT_SAS_DEV_STAT_RC_NO_PERSIST_ADDED:
-			sprintf(buf,"SAS Device Status Change: No Persistancy Added: id=%d", id);
+			snprintf(evStr, EVENT_DESCR_STR_SZ,
+			    "SAS Device Status Change: No Persistancy "
+			    "Added: id=%d", id);
 			break;
 		default:
-			sprintf(buf,"SAS Device Status Change: Unknown: id=%d", id);
-		break;
+			snprintf(evStr, EVENT_DESCR_STR_SZ,
+			    "SAS Device Status Change: Unknown: id=%d", id);
+			break;
 		}
-		ds = buf;
 		break;
 	}
 	case MPI_EVENT_ON_BUS_TIMER_EXPIRED:
@@ -5890,41 +5911,46 @@ EventDescriptionStr(u8 event, u32 evData0, char *evStr)
 		break;
 	case MPI_EVENT_SAS_PHY_LINK_STATUS:
 	{
-		char buf[50];
 		u8 LinkRates = (u8)(evData0 >> 8);
 		u8 PhyNumber = (u8)(evData0);
 		LinkRates = (LinkRates & MPI_EVENT_SAS_PLS_LR_CURRENT_MASK) >>
 			MPI_EVENT_SAS_PLS_LR_CURRENT_SHIFT;
 		switch (LinkRates) {
 		case MPI_EVENT_SAS_PLS_LR_RATE_UNKNOWN:
-			sprintf(buf,"SAS PHY Link Status: Phy=%d:"
+			snprintf(evStr, EVENT_DESCR_STR_SZ,
+			   "SAS PHY Link Status: Phy=%d:"
 			   " Rate Unknown",PhyNumber);
 			break;
 		case MPI_EVENT_SAS_PLS_LR_RATE_PHY_DISABLED:
-			sprintf(buf,"SAS PHY Link Status: Phy=%d:"
+			snprintf(evStr, EVENT_DESCR_STR_SZ,
+			   "SAS PHY Link Status: Phy=%d:"
 			   " Phy Disabled",PhyNumber);
 			break;
 		case MPI_EVENT_SAS_PLS_LR_RATE_FAILED_SPEED_NEGOTIATION:
-			sprintf(buf,"SAS PHY Link Status: Phy=%d:"
+			snprintf(evStr, EVENT_DESCR_STR_SZ,
+			   "SAS PHY Link Status: Phy=%d:"
 			   " Failed Speed Nego",PhyNumber);
 			break;
 		case MPI_EVENT_SAS_PLS_LR_RATE_SATA_OOB_COMPLETE:
-			sprintf(buf,"SAS PHY Link Status: Phy=%d:"
+			snprintf(evStr, EVENT_DESCR_STR_SZ,
+			   "SAS PHY Link Status: Phy=%d:"
 			   " Sata OOB Completed",PhyNumber);
 			break;
 		case MPI_EVENT_SAS_PLS_LR_RATE_1_5:
-			sprintf(buf,"SAS PHY Link Status: Phy=%d:"
+			snprintf(evStr, EVENT_DESCR_STR_SZ,
+			   "SAS PHY Link Status: Phy=%d:"
 			   " Rate 1.5 Gbps",PhyNumber);
 			break;
 		case MPI_EVENT_SAS_PLS_LR_RATE_3_0:
-			sprintf(buf,"SAS PHY Link Status: Phy=%d:"
+			snprintf(evStr, EVENT_DESCR_STR_SZ,
+			   "SAS PHY Link Status: Phy=%d:"
 			   " Rate 3.0 Gpbs",PhyNumber);
 			break;
 		default:
-			sprintf(buf,"SAS PHY Link Status: Phy=%d", PhyNumber);
+			snprintf(evStr, EVENT_DESCR_STR_SZ,
+			   "SAS PHY Link Status: Phy=%d", PhyNumber);
 			break;
 		}
-		ds = buf;
 		break;
 	}
 	case MPI_EVENT_SAS_DISCOVERY_ERROR:
@@ -5933,9 +5959,8 @@ EventDescriptionStr(u8 event, u32 evData0, char *evStr)
 	case MPI_EVENT_IR_RESYNC_UPDATE:
 	{
 		u8 resync_complete = (u8)(evData0 >> 16);
-		char buf[40];
-		sprintf(buf,"IR Resync Update: Complete = %d:",resync_complete);
-		ds = buf;
+		snprintf(evStr, EVENT_DESCR_STR_SZ,
+		    "IR Resync Update: Complete = %d:",resync_complete);
 		break;
 	}
 	case MPI_EVENT_IR2:
@@ -5988,7 +6013,8 @@ EventDescriptionStr(u8 event, u32 evData0, char *evStr)
 		ds = "Unknown";
 		break;
 	}
-	strcpy(evStr,ds);
+	if (ds)
+		strncpy(evStr, ds, EVENT_DESCR_STR_SZ);
 }
 
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
@@ -6010,7 +6036,7 @@ ProcessEventNotification(MPT_ADAPTER *ioc, EventNotificationReply_t *pEventReply
 	int ii;
 	int r = 0;
 	int handlers = 0;
-	char evStr[100];
+	char evStr[EVENT_DESCR_STR_SZ];
 	u8 event;
 
 	/*
diff --git a/drivers/message/fusion/mptbase.h b/drivers/message/fusion/mptbase.h
index be7e8501b53c..f673cca507e1 100644
--- a/drivers/message/fusion/mptbase.h
+++ b/drivers/message/fusion/mptbase.h
@@ -76,8 +76,8 @@
 #define COPYRIGHT	"Copyright (c) 1999-2005 " MODULEAUTHOR
 #endif
 
-#define MPT_LINUX_VERSION_COMMON	"3.03.08"
-#define MPT_LINUX_PACKAGE_NAME		"@(#)mptlinux-3.03.08"
+#define MPT_LINUX_VERSION_COMMON	"3.03.09"
+#define MPT_LINUX_PACKAGE_NAME		"@(#)mptlinux-3.03.09"
 #define WHAT_MAGIC_STRING		"@" "(" "#" ")"
 
 #define show_mptmod_ver(s,ver)  \
@@ -489,7 +489,6 @@ typedef	struct _RaidCfgData {
 
 #define MPT_RPORT_INFO_FLAGS_REGISTERED	0x01	/* rport registered */
 #define MPT_RPORT_INFO_FLAGS_MISSING	0x02	/* missing from DevPage0 scan */
-#define MPT_RPORT_INFO_FLAGS_MAPPED_VDEV 0x04	/* target mapped in vdev */
 
 /*
  * data allocated for each fc rport device
@@ -501,7 +500,6 @@ struct mptfc_rport_info
 	struct scsi_target *starget;
 	FCDevicePage0_t pg0;
 	u8		flags;
-	u8		remap_needed;
 };
 
 /*
@@ -628,11 +626,11 @@ typedef struct _MPT_ADAPTER
 	struct work_struct	 mptscsih_persistTask;
 
 	struct list_head	 fc_rports;
-	spinlock_t		 fc_rport_lock; /* list and ri flags */
 	spinlock_t		 fc_rescan_work_lock;
 	int			 fc_rescan_work_count;
 	struct work_struct	 fc_rescan_work;
-
+	char			 fc_rescan_work_q_name[KOBJ_NAME_LEN];
+	struct workqueue_struct *fc_rescan_work_q;
 } MPT_ADAPTER;
 
 /*
diff --git a/drivers/message/fusion/mptfc.c b/drivers/message/fusion/mptfc.c
index b343f2a68b1c..856487741ef4 100644
--- a/drivers/message/fusion/mptfc.c
+++ b/drivers/message/fusion/mptfc.c
@@ -341,9 +341,6 @@ mptfc_generate_rport_ids(FCDevicePage0_t *pg0, struct fc_rport_identifiers *rid)
 	rid->port_name = ((u64)pg0->WWPN.High) << 32 | (u64)pg0->WWPN.Low;
 	rid->port_id =   pg0->PortIdentifier;
 	rid->roles = FC_RPORT_ROLE_UNKNOWN;
-	rid->roles |= FC_RPORT_ROLE_FCP_TARGET;
-	if (pg0->Protocol & MPI_FC_DEVICE_PAGE0_PROT_FCP_INITIATOR)
-		rid->roles |= FC_RPORT_ROLE_FCP_INITIATOR;
 
 	return 0;
 }
@@ -355,15 +352,18 @@ mptfc_register_dev(MPT_ADAPTER *ioc, int channel, FCDevicePage0_t *pg0)
 	struct fc_rport		*rport;
 	struct mptfc_rport_info	*ri;
 	int			new_ri = 1;
-	u64			pn;
-	unsigned long		flags;
+	u64			pn, nn;
 	VirtTarget		*vtarget;
+	u32			roles = FC_RPORT_ROLE_UNKNOWN;
 
 	if (mptfc_generate_rport_ids(pg0, &rport_ids) < 0)
 		return;
 
+	roles |= FC_RPORT_ROLE_FCP_TARGET;
+	if (pg0->Protocol & MPI_FC_DEVICE_PAGE0_PROT_FCP_INITIATOR)
+		roles |= FC_RPORT_ROLE_FCP_INITIATOR;
+
 	/* scan list looking for a match */
-	spin_lock_irqsave(&ioc->fc_rport_lock, flags);
 	list_for_each_entry(ri, &ioc->fc_rports, list) {
 		pn = (u64)ri->pg0.WWPN.High << 32 | (u64)ri->pg0.WWPN.Low;
 		if (pn == rport_ids.port_name) {	/* match */
@@ -373,11 +373,9 @@ mptfc_register_dev(MPT_ADAPTER *ioc, int channel, FCDevicePage0_t *pg0)
 		}
 	}
 	if (new_ri) {	/* allocate one */
-		spin_unlock_irqrestore(&ioc->fc_rport_lock, flags);
 		ri = kzalloc(sizeof(struct mptfc_rport_info), GFP_KERNEL);
 		if (!ri)
 			return;
-		spin_lock_irqsave(&ioc->fc_rport_lock, flags);
 		list_add_tail(&ri->list, &ioc->fc_rports);
 	}
 
@@ -387,14 +385,11 @@ mptfc_register_dev(MPT_ADAPTER *ioc, int channel, FCDevicePage0_t *pg0)
 	/* MPT_RPORT_INFO_FLAGS_REGISTERED - rport not previously deleted */
 	if (!(ri->flags & MPT_RPORT_INFO_FLAGS_REGISTERED)) {
 		ri->flags |= MPT_RPORT_INFO_FLAGS_REGISTERED;
-		spin_unlock_irqrestore(&ioc->fc_rport_lock, flags);
 		rport = fc_remote_port_add(ioc->sh, channel, &rport_ids);
-		spin_lock_irqsave(&ioc->fc_rport_lock, flags);
 		if (rport) {
 			ri->rport = rport;
 			if (new_ri) /* may have been reset by user */
 				rport->dev_loss_tmo = mptfc_dev_loss_tmo;
-			*((struct mptfc_rport_info **)rport->dd_data) = ri;
 			/*
 			 * if already mapped, remap here.  If not mapped,
 			 * target_alloc will allocate vtarget and map,
@@ -406,16 +401,21 @@ mptfc_register_dev(MPT_ADAPTER *ioc, int channel, FCDevicePage0_t *pg0)
 					vtarget->target_id = pg0->CurrentTargetID;
 					vtarget->bus_id = pg0->CurrentBus;
 				}
-				ri->remap_needed = 0;
 			}
+			*((struct mptfc_rport_info **)rport->dd_data) = ri;
+			/* scan will be scheduled once rport becomes a target */
+			fc_remote_port_rolechg(rport,roles);
+
+			pn = (u64)ri->pg0.WWPN.High << 32 | (u64)ri->pg0.WWPN.Low;
+			nn = (u64)ri->pg0.WWNN.High << 32 | (u64)ri->pg0.WWNN.Low;
 			dfcprintk ((MYIOC_s_INFO_FMT
 				"mptfc_reg_dev.%d: %x, %llx / %llx, tid %d, "
 				"rport tid %d, tmo %d\n",
 					ioc->name,
 					ioc->sh->host_no,
 					pg0->PortIdentifier,
-					pg0->WWNN,
-					pg0->WWPN,
+					(unsigned long long)nn,
+					(unsigned long long)pn,
 					pg0->CurrentTargetID,
 					ri->rport->scsi_target_id,
 					ri->rport->dev_loss_tmo));
@@ -425,8 +425,6 @@ mptfc_register_dev(MPT_ADAPTER *ioc, int channel, FCDevicePage0_t *pg0)
 			ri = NULL;
 		}
 	}
-	spin_unlock_irqrestore(&ioc->fc_rport_lock,flags);
-
 }
 
 /*
@@ -476,7 +474,6 @@ mptfc_target_alloc(struct scsi_target *starget)
 			vtarget->target_id = ri->pg0.CurrentTargetID;
 			vtarget->bus_id = ri->pg0.CurrentBus;
 			ri->starget = starget;
-			ri->remap_needed = 0;
 			rc = 0;
 		}
 	}
@@ -502,10 +499,10 @@ mptfc_slave_alloc(struct scsi_device *sdev)
 	VirtDevice		*vdev;
 	struct scsi_target	*starget;
 	struct fc_rport		*rport;
-	unsigned long		flags;
 
 
-	rport = starget_to_rport(scsi_target(sdev));
+	starget = scsi_target(sdev);
+	rport = starget_to_rport(starget);
 
 	if (!rport || fc_remote_port_chkready(rport))
 		return -ENXIO;
@@ -519,10 +516,8 @@ mptfc_slave_alloc(struct scsi_device *sdev)
 		return -ENOMEM;
 	}
 
-	spin_lock_irqsave(&hd->ioc->fc_rport_lock,flags);
 
 	sdev->hostdata = vdev;
-	starget = scsi_target(sdev);
 	vtarget = starget->hostdata;
 
 	if (vtarget->num_luns == 0) {
@@ -535,14 +530,16 @@ mptfc_slave_alloc(struct scsi_device *sdev)
 	vdev->vtarget = vtarget;
 	vdev->lun = sdev->lun;
 
-	spin_unlock_irqrestore(&hd->ioc->fc_rport_lock,flags);
-
 	vtarget->num_luns++;
 
+
 #ifdef DMPT_DEBUG_FC
-	 {
+	{
+	u64 nn, pn;
 	struct mptfc_rport_info *ri;
 	ri = *((struct mptfc_rport_info **)rport->dd_data);
+	pn = (u64)ri->pg0.WWPN.High << 32 | (u64)ri->pg0.WWPN.Low;
+	nn = (u64)ri->pg0.WWNN.High << 32 | (u64)ri->pg0.WWNN.Low;
 	dfcprintk ((MYIOC_s_INFO_FMT
 		"mptfc_slv_alloc.%d: num_luns %d, sdev.id %d, "
 	        "CurrentTargetID %d, %x %llx %llx\n",
@@ -550,7 +547,9 @@ mptfc_slave_alloc(struct scsi_device *sdev)
 		sdev->host->host_no,
 		vtarget->num_luns,
 		sdev->id, ri->pg0.CurrentTargetID,
-		ri->pg0.PortIdentifier, ri->pg0.WWPN, ri->pg0.WWNN));
+		ri->pg0.PortIdentifier,
+		(unsigned long long)pn,
+		(unsigned long long)nn));
 	}
 #endif
 
@@ -570,11 +569,31 @@ mptfc_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
 		done(SCpnt);
 		return 0;
 	}
+
+	/* dd_data is null until finished adding target */
 	ri = *((struct mptfc_rport_info **)rport->dd_data);
-	if (unlikely(ri->remap_needed))
-		return SCSI_MLQUEUE_HOST_BUSY;
+	if (unlikely(!ri)) {
+		dfcprintk ((MYIOC_s_INFO_FMT
+			"mptfc_qcmd.%d: %d:%d, dd_data is null.\n",
+			((MPT_SCSI_HOST *) SCpnt->device->host->hostdata)->ioc->name,
+			((MPT_SCSI_HOST *) SCpnt->device->host->hostdata)->ioc->sh->host_no,
+			SCpnt->device->id,SCpnt->device->lun));
+		SCpnt->result = DID_IMM_RETRY << 16;
+		done(SCpnt);
+		return 0;
+	}
 
-	return mptscsih_qcmd(SCpnt,done);
+	err = mptscsih_qcmd(SCpnt,done);
+#ifdef DMPT_DEBUG_FC
+	if (unlikely(err)) {
+		dfcprintk ((MYIOC_s_INFO_FMT
+			"mptfc_qcmd.%d: %d:%d, mptscsih_qcmd returns non-zero.\n",
+			((MPT_SCSI_HOST *) SCpnt->device->host->hostdata)->ioc->name,
+			((MPT_SCSI_HOST *) SCpnt->device->host->hostdata)->ioc->sh->host_no,
+			SCpnt->device->id,SCpnt->device->lun));
+	}
+#endif
+	return err;
 }
 
 static void
@@ -615,18 +634,17 @@ mptfc_rescan_devices(void *arg)
 	MPT_ADAPTER		*ioc = (MPT_ADAPTER *)arg;
 	int			ii;
 	int			work_to_do;
+	u64			pn;
 	unsigned long		flags;
 	struct mptfc_rport_info *ri;
 
 	do {
 		/* start by tagging all ports as missing */
-		spin_lock_irqsave(&ioc->fc_rport_lock,flags);
 		list_for_each_entry(ri, &ioc->fc_rports, list) {
 			if (ri->flags & MPT_RPORT_INFO_FLAGS_REGISTERED) {
 				ri->flags |= MPT_RPORT_INFO_FLAGS_MISSING;
 			}
 		}
-		spin_unlock_irqrestore(&ioc->fc_rport_lock,flags);
 
 		/*
 		 * now rescan devices known to adapter,
@@ -639,33 +657,24 @@ mptfc_rescan_devices(void *arg)
 		}
 
 		/* delete devices still missing */
-		spin_lock_irqsave(&ioc->fc_rport_lock, flags);
 		list_for_each_entry(ri, &ioc->fc_rports, list) {
 			/* if newly missing, delete it */
-			if ((ri->flags & (MPT_RPORT_INFO_FLAGS_REGISTERED |
-					  MPT_RPORT_INFO_FLAGS_MISSING))
-			  == (MPT_RPORT_INFO_FLAGS_REGISTERED |
-			      MPT_RPORT_INFO_FLAGS_MISSING)) {
+			if (ri->flags & MPT_RPORT_INFO_FLAGS_MISSING) {
 
 				ri->flags &= ~(MPT_RPORT_INFO_FLAGS_REGISTERED|
 					       MPT_RPORT_INFO_FLAGS_MISSING);
-				ri->remap_needed = 1;
-				fc_remote_port_delete(ri->rport);
-				/*
-				 * remote port not really deleted 'cause
-				 * binding is by WWPN and driver only
-				 * registers FCP_TARGETs but cannot trust
-				 * data structures.
-				 */
+				fc_remote_port_delete(ri->rport);	/* won't sleep */
 				ri->rport = NULL;
+
+				pn = (u64)ri->pg0.WWPN.High << 32 |
+				     (u64)ri->pg0.WWPN.Low;
 				dfcprintk ((MYIOC_s_INFO_FMT
 					"mptfc_rescan.%d: %llx deleted\n",
 					ioc->name,
 					ioc->sh->host_no,
-					ri->pg0.WWPN));
+					(unsigned long long)pn));
 			}
 		}
-		spin_unlock_irqrestore(&ioc->fc_rport_lock,flags);
 
 		/*
 		 * allow multiple passes as target state
@@ -870,10 +879,23 @@ mptfc_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 		goto out_mptfc_probe;
 	}
 
-	for (ii=0; ii < ioc->facts.NumberOfPorts; ii++) {
-		mptfc_init_host_attr(ioc,ii);
-		mptfc_GetFcDevPage0(ioc,ii,mptfc_register_dev);
-	}
+	/* initialize workqueue */
+
+	snprintf(ioc->fc_rescan_work_q_name, KOBJ_NAME_LEN, "mptfc_wq_%d",
+		sh->host_no);
+	ioc->fc_rescan_work_q =
+		create_singlethread_workqueue(ioc->fc_rescan_work_q_name);
+	if (!ioc->fc_rescan_work_q)
+		goto out_mptfc_probe;
+
+	/*
+	 * scan for rports -
+	 *	by doing it via the workqueue, some locking is eliminated
+	 */
+
+	ioc->fc_rescan_work_count = 1;
+	queue_work(ioc->fc_rescan_work_q, &ioc->fc_rescan_work);
+	flush_workqueue(ioc->fc_rescan_work_q);
 
 	return 0;
 
@@ -949,8 +971,18 @@ mptfc_init(void)
 static void __devexit
 mptfc_remove(struct pci_dev *pdev)
 {
-	MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
-	struct mptfc_rport_info *p, *n;
+	MPT_ADAPTER		*ioc = pci_get_drvdata(pdev);
+	struct mptfc_rport_info	*p, *n;
+	struct workqueue_struct *work_q;
+	unsigned long		flags;
+
+	/* destroy workqueue */
+	if ((work_q=ioc->fc_rescan_work_q)) {
+		spin_lock_irqsave(&ioc->fc_rescan_work_lock, flags);
+		ioc->fc_rescan_work_q = NULL;
+		spin_unlock_irqrestore(&ioc->fc_rescan_work_lock, flags);
+		destroy_workqueue(work_q);
+	}
 
 	fc_remove_host(ioc->sh);
 
diff --git a/drivers/message/fusion/mptsas.c b/drivers/message/fusion/mptsas.c
index e9716b10acea..af6ec553ff7c 100644
--- a/drivers/message/fusion/mptsas.c
+++ b/drivers/message/fusion/mptsas.c
@@ -91,6 +91,7 @@ enum mptsas_hotplug_action {
 	MPTSAS_DEL_DEVICE,
 	MPTSAS_ADD_RAID,
 	MPTSAS_DEL_RAID,
+	MPTSAS_IGNORE_EVENT,
 };
 
 struct mptsas_hotplug_event {
@@ -298,6 +299,26 @@ mptsas_find_portinfo_by_handle(MPT_ADAPTER *ioc, u16 handle)
 	return rc;
 }
 
+/*
+ * Returns true if there is a scsi end device
+ */
+static inline int
+mptsas_is_end_device(struct mptsas_devinfo * attached)
+{
+	if ((attached->handle) &&
+	    (attached->device_info &
+	    MPI_SAS_DEVICE_INFO_END_DEVICE) &&
+	    ((attached->device_info &
+	    MPI_SAS_DEVICE_INFO_SSP_TARGET) |
+	    (attached->device_info &
+	    MPI_SAS_DEVICE_INFO_STP_TARGET) |
+	    (attached->device_info &
+	    MPI_SAS_DEVICE_INFO_SATA_DEVICE)))
+		return 1;
+	else
+		return 0;
+}
+
 static int
 mptsas_sas_enclosure_pg0(MPT_ADAPTER *ioc, struct mptsas_enclosure *enclosure,
 		u32 form, u32 form_specific)
@@ -872,7 +893,11 @@ mptsas_sas_device_pg0(MPT_ADAPTER *ioc, struct mptsas_devinfo *device_info,
 	SasDevicePage0_t *buffer;
 	dma_addr_t dma_handle;
 	__le64 sas_address;
-	int error;
+	int error=0;
+
+	if (ioc->sas_discovery_runtime &&
+		mptsas_is_end_device(device_info))
+			goto out;
 
 	hdr.PageVersion = MPI_SASDEVICE0_PAGEVERSION;
 	hdr.ExtPageLength = 0;
@@ -1009,7 +1034,11 @@ mptsas_sas_expander_pg1(MPT_ADAPTER *ioc, struct mptsas_phyinfo *phy_info,
 	CONFIGPARMS cfg;
 	SasExpanderPage1_t *buffer;
 	dma_addr_t dma_handle;
-	int error;
+	int error=0;
+
+	if (ioc->sas_discovery_runtime &&
+		mptsas_is_end_device(&phy_info->attached))
+			goto out;
 
 	hdr.PageVersion = MPI_SASEXPANDER0_PAGEVERSION;
 	hdr.ExtPageLength = 0;
@@ -1068,26 +1097,6 @@ mptsas_sas_expander_pg1(MPT_ADAPTER *ioc, struct mptsas_phyinfo *phy_info,
 	return error;
 }
 
-/*
- * Returns true if there is a scsi end device
- */
-static inline int
-mptsas_is_end_device(struct mptsas_devinfo * attached)
-{
-	if ((attached->handle) &&
-	    (attached->device_info &
-	    MPI_SAS_DEVICE_INFO_END_DEVICE) &&
-	    ((attached->device_info &
-	    MPI_SAS_DEVICE_INFO_SSP_TARGET) |
-	    (attached->device_info &
-	    MPI_SAS_DEVICE_INFO_STP_TARGET) |
-	    (attached->device_info &
-	    MPI_SAS_DEVICE_INFO_SATA_DEVICE)))
-		return 1;
-	else
-		return 0;
-}
-
 static void
 mptsas_parse_device_info(struct sas_identify *identify,
 		struct mptsas_devinfo *device_info)
@@ -1737,6 +1746,9 @@ mptsas_hotplug_work(void *arg)
 		break;
 	case MPTSAS_ADD_DEVICE:
 
+		if (ev->phys_disk_num_valid)
+			mpt_findImVolumes(ioc);
+
 		/*
 		 * Refresh sas device pg0 data
 		 */
@@ -1868,6 +1880,9 @@ mptsas_hotplug_work(void *arg)
 		scsi_device_put(sdev);
 		mpt_findImVolumes(ioc);
 		break;
+	case MPTSAS_IGNORE_EVENT:
+	default:
+		break;
 	}
 
 	kfree(ev);
@@ -1940,7 +1955,8 @@ mptscsih_send_raid_event(MPT_ADAPTER *ioc,
 		EVENT_DATA_RAID *raid_event_data)
 {
 	struct mptsas_hotplug_event *ev;
-	RAID_VOL0_STATUS * volumeStatus;
+	int status = le32_to_cpu(raid_event_data->SettingsStatus);
+	int state = (status >> 8) & 0xff;
 
 	if (ioc->bus_type != SAS)
 		return;
@@ -1955,6 +1971,7 @@ mptscsih_send_raid_event(MPT_ADAPTER *ioc,
 	INIT_WORK(&ev->work, mptsas_hotplug_work, ev);
 	ev->ioc = ioc;
 	ev->id = raid_event_data->VolumeID;
+	ev->event_type = MPTSAS_IGNORE_EVENT;
 
 	switch (raid_event_data->ReasonCode) {
 	case MPI_EVENT_RAID_RC_PHYSDISK_DELETED:
@@ -1966,6 +1983,25 @@ mptscsih_send_raid_event(MPT_ADAPTER *ioc,
 		ev->phys_disk_num = raid_event_data->PhysDiskNum;
 		ev->event_type = MPTSAS_DEL_DEVICE;
 		break;
+	case MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED:
+		switch (state) {
+		case MPI_PD_STATE_ONLINE:
+			ioc->raid_data.isRaid = 1;
+			ev->phys_disk_num_valid = 1;
+			ev->phys_disk_num = raid_event_data->PhysDiskNum;
+			ev->event_type = MPTSAS_ADD_DEVICE;
+			break;
+		case MPI_PD_STATE_MISSING:
+		case MPI_PD_STATE_NOT_COMPATIBLE:
+		case MPI_PD_STATE_OFFLINE_AT_HOST_REQUEST:
+		case MPI_PD_STATE_FAILED_AT_HOST_REQUEST:
+		case MPI_PD_STATE_OFFLINE_FOR_ANOTHER_REASON:
+			ev->event_type = MPTSAS_DEL_DEVICE;
+			break;
+		default:
+			break;
+		}
+		break;
 	case MPI_EVENT_RAID_RC_VOLUME_DELETED:
 		ev->event_type = MPTSAS_DEL_RAID;
 		break;
@@ -1973,11 +2009,18 @@ mptscsih_send_raid_event(MPT_ADAPTER *ioc,
 		ev->event_type = MPTSAS_ADD_RAID;
 		break;
 	case MPI_EVENT_RAID_RC_VOLUME_STATUS_CHANGED:
-		volumeStatus = (RAID_VOL0_STATUS *) &
-		    raid_event_data->SettingsStatus;
-		ev->event_type = (volumeStatus->State ==
-		    MPI_RAIDVOL0_STATUS_STATE_FAILED) ?
-		    MPTSAS_DEL_RAID : MPTSAS_ADD_RAID;
+		switch (state) {
+		case MPI_RAIDVOL0_STATUS_STATE_FAILED:
+		case MPI_RAIDVOL0_STATUS_STATE_MISSING:
+			ev->event_type = MPTSAS_DEL_RAID;
+			break;
+		case MPI_RAIDVOL0_STATUS_STATE_OPTIMAL:
+		case MPI_RAIDVOL0_STATUS_STATE_DEGRADED:
+			ev->event_type = MPTSAS_ADD_RAID;
+			break;
+		default:
+			break;
+		}
 		break;
 	default:
 		break;
diff --git a/drivers/message/fusion/mptscsih.c b/drivers/message/fusion/mptscsih.c
index 3729062db317..84fa271eb8f4 100644
--- a/drivers/message/fusion/mptscsih.c
+++ b/drivers/message/fusion/mptscsih.c
@@ -632,7 +632,11 @@ mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
 
 		case MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE:	/* 0x0043 */
 			/* Spoof to SCSI Selection Timeout! */
-			sc->result = DID_NO_CONNECT << 16;
+			if (ioc->bus_type != FC)
+				sc->result = DID_NO_CONNECT << 16;
+			/* else fibre, just stall until rescan event */
+			else
+				sc->result = DID_REQUEUE << 16;
 
 			if (hd->sel_timeout[pScsiReq->TargetID] < 0xFFFF)
 				hd->sel_timeout[pScsiReq->TargetID]++;
@@ -877,7 +881,7 @@ mptscsih_search_running_cmds(MPT_SCSI_HOST *hd, VirtDevice *vdevice)
 	struct scsi_cmnd *sc;
 
 	dsprintk((KERN_INFO MYNAM ": search_running target %d lun %d max %d\n",
-			vdevice->target_id, vdevice->lun, max));
+			vdevice->vtarget->target_id, vdevice->lun, max));
 
 	for (ii=0; ii < max; ii++) {
 		if ((sc = hd->ScsiLookup[ii]) != NULL) {
@@ -1645,7 +1649,6 @@ int
 mptscsih_abort(struct scsi_cmnd * SCpnt)
 {
 	MPT_SCSI_HOST	*hd;
-	MPT_ADAPTER	*ioc;
 	MPT_FRAME_HDR	*mf;
 	u32		 ctx2abort;
 	int		 scpnt_idx;
@@ -1663,14 +1666,6 @@ mptscsih_abort(struct scsi_cmnd * SCpnt)
 		return FAILED;
 	}
 
-	ioc = hd->ioc;
-	if (hd->resetPending) {
-		return FAILED;
-	}
-
-	if (hd->timeouts < -1)
-		hd->timeouts++;
-
 	/* Find this command
 	 */
 	if ((scpnt_idx = SCPNT_TO_LOOKUP_IDX(SCpnt)) < 0) {
@@ -1684,6 +1679,13 @@ mptscsih_abort(struct scsi_cmnd * SCpnt)
 		return SUCCESS;
 	}
 
+	if (hd->resetPending) {
+		return FAILED;
+	}
+
+	if (hd->timeouts < -1)
+		hd->timeouts++;
+
 	printk(KERN_WARNING MYNAM ": %s: attempting task abort! (sc=%p)\n",
 	       hd->ioc->name, SCpnt);
 	scsi_print_command(SCpnt);
@@ -1703,7 +1705,7 @@ mptscsih_abort(struct scsi_cmnd * SCpnt)
 	vdev = SCpnt->device->hostdata;
 	retval = mptscsih_TMHandler(hd, MPI_SCSITASKMGMT_TASKTYPE_ABORT_TASK,
 		vdev->vtarget->bus_id, vdev->vtarget->target_id, vdev->lun,
-		ctx2abort, mptscsih_get_tm_timeout(ioc));
+		ctx2abort, mptscsih_get_tm_timeout(hd->ioc));
 
 	printk (KERN_WARNING MYNAM ": %s: task abort: %s (sc=%p)\n",
 		hd->ioc->name,
@@ -2521,15 +2523,15 @@ mptscsih_ioc_reset(MPT_ADAPTER *ioc, int reset_phase)
 
 		/* 7. FC: Rescan for blocked rports which might have returned.
 		 */
-		else if (ioc->bus_type == FC) {
-			int work_count;
-			unsigned long flags;
-
+		if (ioc->bus_type == FC) {
 			spin_lock_irqsave(&ioc->fc_rescan_work_lock, flags);
-			work_count = ++ioc->fc_rescan_work_count;
+			if (ioc->fc_rescan_work_q) {
+				if (ioc->fc_rescan_work_count++ == 0) {
+					queue_work(ioc->fc_rescan_work_q,
+						   &ioc->fc_rescan_work);
+				}
+			}
 			spin_unlock_irqrestore(&ioc->fc_rescan_work_lock, flags);
-			if (work_count == 1)
-				schedule_work(&ioc->fc_rescan_work);
 		}
 		dtmprintk((MYIOC_s_WARN_FMT "Post-Reset complete.\n", ioc->name));
 
@@ -2544,7 +2546,6 @@ mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply)
 {
 	MPT_SCSI_HOST *hd;
 	u8 event = le32_to_cpu(pEvReply->Event) & 0xFF;
-	int work_count;
 	unsigned long flags;
 
 	devtverboseprintk((MYIOC_s_INFO_FMT "MPT event (=%02Xh) routed to SCSI host driver!\n",
@@ -2569,10 +2570,13 @@ mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply)
 
 	case MPI_EVENT_RESCAN:				/* 06 */
 		spin_lock_irqsave(&ioc->fc_rescan_work_lock, flags);
-		work_count = ++ioc->fc_rescan_work_count;
+		if (ioc->fc_rescan_work_q) {
+			if (ioc->fc_rescan_work_count++ == 0) {
+				queue_work(ioc->fc_rescan_work_q,
+					   &ioc->fc_rescan_work);
+			}
+		}
 		spin_unlock_irqrestore(&ioc->fc_rescan_work_lock, flags);
-		if (work_count == 1)
-			schedule_work(&ioc->fc_rescan_work);
 		break;
 
 		/*
diff --git a/drivers/message/fusion/mptspi.c b/drivers/message/fusion/mptspi.c
index 09c745b19cc8..f2a4d382ea19 100644
--- a/drivers/message/fusion/mptspi.c
+++ b/drivers/message/fusion/mptspi.c
@@ -783,6 +783,70 @@ static struct pci_device_id mptspi_pci_table[] = {
 };
 MODULE_DEVICE_TABLE(pci, mptspi_pci_table);
 
+
+/*
+ * renegotiate for a given target
+ */
+static void
+mptspi_dv_renegotiate_work(void *data)
+{
+	struct work_queue_wrapper *wqw = (struct work_queue_wrapper *)data;
+	struct _MPT_SCSI_HOST *hd = wqw->hd;
+	struct scsi_device *sdev;
+
+	kfree(wqw);
+
+	shost_for_each_device(sdev, hd->ioc->sh)
+		mptspi_dv_device(hd, sdev);
+}
+
+static void
+mptspi_dv_renegotiate(struct _MPT_SCSI_HOST *hd)
+{
+	struct work_queue_wrapper *wqw = kmalloc(sizeof(*wqw), GFP_ATOMIC);
+
+	if (!wqw)
+		return;
+
+	INIT_WORK(&wqw->work, mptspi_dv_renegotiate_work, wqw);
+	wqw->hd = hd;
+
+	schedule_work(&wqw->work);
+}
+
+/*
+ * spi module reset handler
+ */
+static int
+mptspi_ioc_reset(MPT_ADAPTER *ioc, int reset_phase)
+{
+	struct _MPT_SCSI_HOST *hd = (struct _MPT_SCSI_HOST *)ioc->sh->hostdata;
+	int rc;
+
+	rc = mptscsih_ioc_reset(ioc, reset_phase);
+
+	if (reset_phase == MPT_IOC_POST_RESET)
+		mptspi_dv_renegotiate(hd);
+
+	return rc;
+}
+
+/*
+ * spi module resume handler
+ */
+static int
+mptspi_resume(struct pci_dev *pdev)
+{
+	MPT_ADAPTER 	*ioc = pci_get_drvdata(pdev);
+	struct _MPT_SCSI_HOST *hd = (struct _MPT_SCSI_HOST *)ioc->sh->hostdata;
+	int rc;
+
+	rc = mptscsih_resume(pdev);
+	mptspi_dv_renegotiate(hd);
+
+	return rc;
+}
+
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 /*
@@ -1032,7 +1096,7 @@ static struct pci_driver mptspi_driver = {
 	.shutdown	= mptscsih_shutdown,
 #ifdef CONFIG_PM
 	.suspend	= mptscsih_suspend,
-	.resume		= mptscsih_resume,
+	.resume		= mptspi_resume,
 #endif
 };
 
@@ -1061,7 +1125,7 @@ mptspi_init(void)
 		  ": Registered for IOC event notifications\n"));
 	}
 
-	if (mpt_reset_register(mptspiDoneCtx, mptscsih_ioc_reset) == 0) {
+	if (mpt_reset_register(mptspiDoneCtx, mptspi_ioc_reset) == 0) {
 		dprintk((KERN_INFO MYNAM
 		  ": Registered for IOC reset notifications\n"));
 	}
diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig
index 003b077c2324..45bcf098e762 100644
--- a/drivers/mmc/Kconfig
+++ b/drivers/mmc/Kconfig
@@ -84,7 +84,7 @@ config MMC_WBSD
 
 config MMC_AU1X
 	tristate "Alchemy AU1XX0 MMC Card Interface support"
-	depends on SOC_AU1X00 && MMC
+	depends on MMC && SOC_AU1200
 	help
 	  This selects the AMD Alchemy(R) Multimedia card interface.
 	  If you have a Alchemy platform with a MMC slot, say Y or M here.
diff --git a/drivers/mmc/at91_mci.c b/drivers/mmc/at91_mci.c
index 6061c2d101a0..88f0eef9cf33 100644
--- a/drivers/mmc/at91_mci.c
+++ b/drivers/mmc/at91_mci.c
@@ -621,9 +621,6 @@ static void at91_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	struct at91mci_host *host = mmc_priv(mmc);
 	unsigned long at91_master_clock = clk_get_rate(mci_clk);
 
-	DBG("Clock %uHz, busmode %u, powermode %u, Vdd %u\n",
-		ios->clock, ios->bus_mode, ios->power_mode, ios->vdd);
-
 	if (host)
 		host->bus_mode = ios->bus_mode;
 	else
diff --git a/drivers/mmc/au1xmmc.c b/drivers/mmc/au1xmmc.c
index c0326bbc5f28..5dc4bee7abeb 100644
--- a/drivers/mmc/au1xmmc.c
+++ b/drivers/mmc/au1xmmc.c
@@ -310,7 +310,7 @@ static void au1xmmc_data_complete(struct au1xmmc_host *host, u32 status)
 		}
 		else
 			data->bytes_xfered =
-				(data->blocks * (1 << data->blksz_bits)) -
+				(data->blocks * data->blksz) -
 				host->pio.len;
 	}
 
@@ -575,7 +575,7 @@ static int
 au1xmmc_prepare_data(struct au1xmmc_host *host, struct mmc_data *data)
 {
 
-	int datalen = data->blocks * (1 << data->blksz_bits);
+	int datalen = data->blocks * data->blksz;
 
 	if (dma != 0)
 		host->flags |= HOST_F_DMA;
@@ -596,7 +596,7 @@ au1xmmc_prepare_data(struct au1xmmc_host *host, struct mmc_data *data)
 	if (host->dma.len == 0)
 		return MMC_ERR_TIMEOUT;
 
-	au_writel((1 << data->blksz_bits) - 1, HOST_BLKSIZE(host));
+	au_writel(data->blksz - 1, HOST_BLKSIZE(host));
 
 	if (host->flags & HOST_F_DMA) {
 		int i;
@@ -720,10 +720,6 @@ static void au1xmmc_set_ios(struct mmc_host* mmc, struct mmc_ios* ios)
 {
 	struct au1xmmc_host *host = mmc_priv(mmc);
 
-	DBG("set_ios (power=%u, clock=%uHz, vdd=%u, mode=%u)\n",
-	      host->id, ios->power_mode, ios->clock, ios->vdd,
-	      ios->bus_mode);
-
 	if (ios->power_mode == MMC_POWER_OFF)
 		au1xmmc_set_power(host, 0);
 	else if (ios->power_mode == MMC_POWER_ON) {
diff --git a/drivers/mmc/imxmmc.c b/drivers/mmc/imxmmc.c
index ffb7f55d3467..a4eb1d0e7a71 100644
--- a/drivers/mmc/imxmmc.c
+++ b/drivers/mmc/imxmmc.c
@@ -102,6 +102,7 @@ struct imxmci_host {
 #define IMXMCI_PEND_CPU_DATA_b	5
 #define IMXMCI_PEND_CARD_XCHG_b	6
 #define IMXMCI_PEND_SET_INIT_b	7
+#define IMXMCI_PEND_STARTED_b	8
 
 #define IMXMCI_PEND_IRQ_m	(1 << IMXMCI_PEND_IRQ_b)
 #define IMXMCI_PEND_DMA_END_m	(1 << IMXMCI_PEND_DMA_END_b)
@@ -111,6 +112,7 @@ struct imxmci_host {
 #define IMXMCI_PEND_CPU_DATA_m	(1 << IMXMCI_PEND_CPU_DATA_b)
 #define IMXMCI_PEND_CARD_XCHG_m	(1 << IMXMCI_PEND_CARD_XCHG_b)
 #define IMXMCI_PEND_SET_INIT_m	(1 << IMXMCI_PEND_SET_INIT_b)
+#define IMXMCI_PEND_STARTED_m	(1 << IMXMCI_PEND_STARTED_b)
 
 static void imxmci_stop_clock(struct imxmci_host *host)
 {
@@ -131,23 +133,52 @@ static void imxmci_stop_clock(struct imxmci_host *host)
 	dev_dbg(mmc_dev(host->mmc), "imxmci_stop_clock blocked, no luck\n");
 }
 
-static void imxmci_start_clock(struct imxmci_host *host)
+static int imxmci_start_clock(struct imxmci_host *host)
 {
-	int i = 0;
+	unsigned int trials = 0;
+	unsigned int delay_limit = 128;
+	unsigned long flags;
+
 	MMC_STR_STP_CLK &= ~STR_STP_CLK_STOP_CLK;
-	while(i < 0x1000) {
-	        if(!(i & 0x7f))
-			MMC_STR_STP_CLK |= STR_STP_CLK_START_CLK;
 
-		if(MMC_STATUS & STATUS_CARD_BUS_CLK_RUN) {
-			/* Check twice before cut */
+	clear_bit(IMXMCI_PEND_STARTED_b, &host->pending_events);
+
+	/*
+	 * Command start of the clock, this usually succeeds in less
+	 * then 6 delay loops, but during card detection (low clockrate)
+	 * it takes up to 5000 delay loops and sometimes fails for the first time
+	 */
+	MMC_STR_STP_CLK |= STR_STP_CLK_START_CLK;
+
+	do {
+		unsigned int delay = delay_limit;
+
+		while(delay--){
 			if(MMC_STATUS & STATUS_CARD_BUS_CLK_RUN)
-				return;
+				/* Check twice before cut */
+				if(MMC_STATUS & STATUS_CARD_BUS_CLK_RUN)
+					return 0;
+
+			if(test_bit(IMXMCI_PEND_STARTED_b, &host->pending_events))
+				return 0;
 		}
 
-		i++;
-	}
-	dev_dbg(mmc_dev(host->mmc), "imxmci_start_clock blocked, no luck\n");
+		local_irq_save(flags);
+		/*
+		 * Ensure, that request is not doubled under all possible circumstances.
+		 * It is possible, that cock running state is missed, because some other
+		 * IRQ or schedule delays this function execution and the clocks has
+		 * been already stopped by other means (response processing, SDHC HW)
+		 */
+		if(!test_bit(IMXMCI_PEND_STARTED_b, &host->pending_events))
+			MMC_STR_STP_CLK |= STR_STP_CLK_START_CLK;
+		local_irq_restore(flags);
+
+	} while(++trials<256);
+
+	dev_err(mmc_dev(host->mmc), "imxmci_start_clock blocked, no luck\n");
+
+	return -1;
 }
 
 static void imxmci_softreset(void)
@@ -187,8 +218,10 @@ static int imxmci_busy_wait_for_status(struct imxmci_host *host,
 	if(!loops)
 		return 0;
 
-	dev_info(mmc_dev(host->mmc), "busy wait for %d usec in %s, STATUS = 0x%x (0x%x)\n",
-		loops, where, *pstat, stat_mask);
+	/* The busy-wait is expected there for clock <8MHz due to SDHC hardware flaws */
+	if(!(stat_mask & STATUS_END_CMD_RESP) || (host->mmc->ios.clock>=8000000))
+		dev_info(mmc_dev(host->mmc), "busy wait for %d usec in %s, STATUS = 0x%x (0x%x)\n",
+			loops, where, *pstat, stat_mask);
 	return loops;
 }
 
@@ -302,6 +335,9 @@ static void imxmci_start_cmd(struct imxmci_host *host, struct mmc_command *cmd,
 	WARN_ON(host->cmd != NULL);
 	host->cmd = cmd;
 
+	/* Ensure, that clock are stopped else command programming and start fails */
+	imxmci_stop_clock(host);
+
 	if (cmd->flags & MMC_RSP_BUSY)
 		cmdat |= CMD_DAT_CONT_BUSY;
 
@@ -498,7 +534,7 @@ static int imxmci_data_done(struct imxmci_host *host, unsigned int stat)
 
 	data_error = imxmci_finish_data(host, stat);
 
-	if (host->req->stop && (data_error == MMC_ERR_NONE)) {
+	if (host->req->stop) {
 		imxmci_stop_clock(host);
 		imxmci_start_cmd(host, host->req->stop, 0);
 	} else {
@@ -522,7 +558,7 @@ static int imxmci_cpu_driven_data(struct imxmci_host *host, unsigned int *pstat)
 	int trans_done = 0;
 	unsigned int stat = *pstat;
 
-	if(host->actual_bus_width == MMC_BUS_WIDTH_4)
+	if(host->actual_bus_width != MMC_BUS_WIDTH_4)
 		burst_len = 16;
 	else
 		burst_len = 64;
@@ -560,8 +596,7 @@ static int imxmci_cpu_driven_data(struct imxmci_host *host, unsigned int *pstat)
 			stat = MMC_STATUS;
 
 			/* Flush extra bytes from FIFO */
-			while(flush_len >= 2){
-				flush_len -= 2;
+			while(flush_len && !(stat & STATUS_DATA_TRANS_DONE)){
 				i = MMC_BUFFER_ACCESS;
 				stat = MMC_STATUS;
 				stat &= ~STATUS_CRC_READ_ERR; /* Stupid but required there */
@@ -622,6 +657,7 @@ static irqreturn_t imxmci_irq(int irq, void *devid, struct pt_regs *regs)
 	atomic_set(&host->stuck_timeout, 0);
 	host->status_reg = stat;
 	set_bit(IMXMCI_PEND_IRQ_b, &host->pending_events);
+	set_bit(IMXMCI_PEND_STARTED_b, &host->pending_events);
 	tasklet_schedule(&host->tasklet);
 
 	return IRQ_RETVAL(handled);;
@@ -714,10 +750,6 @@ static void imxmci_tasklet_fnc(unsigned long data)
 			data_dir_mask = STATUS_DATA_TRANS_DONE;
 		}
 
-		imxmci_busy_wait_for_status(host, &stat,
-				data_dir_mask,
-				50, "imxmci_tasklet_fnc data");
-
 		if(stat & data_dir_mask) {
 			clear_bit(IMXMCI_PEND_DMA_END_b, &host->pending_events);
 			imxmci_data_done(host, stat);
@@ -775,10 +807,6 @@ static void imxmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	struct imxmci_host *host = mmc_priv(mmc);
 	int prescaler;
 
-	dev_dbg(mmc_dev(host->mmc), "clock %u power %u vdd %u width %u\n",
-		ios->clock, ios->power_mode, ios->vdd,
-		(ios->bus_width==MMC_BUS_WIDTH_4)?4:1);
-
 	if( ios->bus_width==MMC_BUS_WIDTH_4 ) {
 		host->actual_bus_width = MMC_BUS_WIDTH_4;
 		imx_gpio_mode(PB11_PF_SD_DAT3);
@@ -837,7 +865,11 @@ static void imxmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 
 		imxmci_stop_clock(host);
 		MMC_CLK_RATE = (prescaler<<3) | clk;
-		imxmci_start_clock(host);
+		/*
+		 * Under my understanding, clock should not be started there, because it would
+		 * initiate SDHC sequencer and send last or random command into card
+		 */
+		/*imxmci_start_clock(host);*/
 
 		dev_dbg(mmc_dev(host->mmc), "MMC_CLK_RATE: 0x%08x\n", MMC_CLK_RATE);
 	} else {
diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
index da6ddd910fc5..6201f3086a02 100644
--- a/drivers/mmc/mmc.c
+++ b/drivers/mmc/mmc.c
@@ -59,21 +59,23 @@ static const unsigned int tacc_mant[] = {
 
 
 /**
- *	mmc_request_done - finish processing an MMC command
- *	@host: MMC host which completed command
- *	@mrq: MMC request which completed
+ *	mmc_request_done - finish processing an MMC request
+ *	@host: MMC host which completed request
+ *	@mrq: MMC request which request
  *
  *	MMC drivers should call this function when they have completed
- *	their processing of a command.  This should be called before the
- *	data part of the command has completed.
+ *	their processing of a request.
  */
 void mmc_request_done(struct mmc_host *host, struct mmc_request *mrq)
 {
 	struct mmc_command *cmd = mrq->cmd;
-	int err = mrq->cmd->error;
-	pr_debug("MMC: req done (%02x): %d: %08x %08x %08x %08x\n",
-		 cmd->opcode, err, cmd->resp[0], cmd->resp[1],
-		 cmd->resp[2], cmd->resp[3]);
+	int err = cmd->error;
+
+	pr_debug("%s: req done (CMD%u): %d/%d/%d: %08x %08x %08x %08x\n",
+		 mmc_hostname(host), cmd->opcode, err,
+		 mrq->data ? mrq->data->error : 0,
+		 mrq->stop ? mrq->stop->error : 0,
+		 cmd->resp[0], cmd->resp[1], cmd->resp[2], cmd->resp[3]);
 
 	if (err && cmd->retries) {
 		cmd->retries--;
@@ -97,8 +99,9 @@ EXPORT_SYMBOL(mmc_request_done);
 void
 mmc_start_request(struct mmc_host *host, struct mmc_request *mrq)
 {
-	pr_debug("MMC: starting cmd %02x arg %08x flags %08x\n",
-		 mrq->cmd->opcode, mrq->cmd->arg, mrq->cmd->flags);
+	pr_debug("%s: starting CMD%u arg %08x flags %08x\n",
+		 mmc_hostname(host), mrq->cmd->opcode,
+		 mrq->cmd->arg, mrq->cmd->flags);
 
 	WARN_ON(host->card_busy == NULL);
 
@@ -312,6 +315,18 @@ void mmc_release_host(struct mmc_host *host)
 
 EXPORT_SYMBOL(mmc_release_host);
 
+static inline void mmc_set_ios(struct mmc_host *host)
+{
+	struct mmc_ios *ios = &host->ios;
+
+	pr_debug("%s: clock %uHz busmode %u powermode %u cs %u Vdd %u width %u\n",
+		 mmc_hostname(host), ios->clock, ios->bus_mode,
+		 ios->power_mode, ios->chip_select, ios->vdd,
+		 ios->bus_width);
+	
+	host->ops->set_ios(host, ios);
+}
+
 static int mmc_select_card(struct mmc_host *host, struct mmc_card *card)
 {
 	int err;
@@ -364,7 +379,7 @@ static int mmc_select_card(struct mmc_host *host, struct mmc_card *card)
 		}
 	}
 
-	host->ops->set_ios(host, &host->ios);
+	mmc_set_ios(host);
 
 	return MMC_ERR_NONE;
 }
@@ -415,7 +430,7 @@ static u32 mmc_select_voltage(struct mmc_host *host, u32 ocr)
 		ocr = 3 << bit;
 
 		host->ios.vdd = bit;
-		host->ops->set_ios(host, &host->ios);
+		mmc_set_ios(host);
 	} else {
 		ocr = 0;
 	}
@@ -549,6 +564,7 @@ static void mmc_decode_csd(struct mmc_card *card)
 		csd->read_partial = UNSTUFF_BITS(resp, 79, 1);
 		csd->write_misalign = UNSTUFF_BITS(resp, 78, 1);
 		csd->read_misalign = UNSTUFF_BITS(resp, 77, 1);
+		csd->r2w_factor = UNSTUFF_BITS(resp, 26, 3);
 		csd->write_blkbits = UNSTUFF_BITS(resp, 22, 4);
 		csd->write_partial = UNSTUFF_BITS(resp, 21, 1);
 	} else {
@@ -583,6 +599,7 @@ static void mmc_decode_csd(struct mmc_card *card)
 		csd->read_partial = UNSTUFF_BITS(resp, 79, 1);
 		csd->write_misalign = UNSTUFF_BITS(resp, 78, 1);
 		csd->read_misalign = UNSTUFF_BITS(resp, 77, 1);
+		csd->r2w_factor = UNSTUFF_BITS(resp, 26, 3);
 		csd->write_blkbits = UNSTUFF_BITS(resp, 22, 4);
 		csd->write_partial = UNSTUFF_BITS(resp, 21, 1);
 	}
@@ -666,7 +683,7 @@ static void mmc_idle_cards(struct mmc_host *host)
 	struct mmc_command cmd;
 
 	host->ios.chip_select = MMC_CS_HIGH;
-	host->ops->set_ios(host, &host->ios);
+	mmc_set_ios(host);
 
 	mmc_delay(1);
 
@@ -679,7 +696,7 @@ static void mmc_idle_cards(struct mmc_host *host)
 	mmc_delay(1);
 
 	host->ios.chip_select = MMC_CS_DONTCARE;
-	host->ops->set_ios(host, &host->ios);
+	mmc_set_ios(host);
 
 	mmc_delay(1);
 }
@@ -704,13 +721,13 @@ static void mmc_power_up(struct mmc_host *host)
 	host->ios.chip_select = MMC_CS_DONTCARE;
 	host->ios.power_mode = MMC_POWER_UP;
 	host->ios.bus_width = MMC_BUS_WIDTH_1;
-	host->ops->set_ios(host, &host->ios);
+	mmc_set_ios(host);
 
 	mmc_delay(1);
 
 	host->ios.clock = host->f_min;
 	host->ios.power_mode = MMC_POWER_ON;
-	host->ops->set_ios(host, &host->ios);
+	mmc_set_ios(host);
 
 	mmc_delay(2);
 }
@@ -723,7 +740,7 @@ static void mmc_power_off(struct mmc_host *host)
 	host->ios.chip_select = MMC_CS_DONTCARE;
 	host->ios.power_mode = MMC_POWER_OFF;
 	host->ios.bus_width = MMC_BUS_WIDTH_1;
-	host->ops->set_ios(host, &host->ios);
+	mmc_set_ios(host);
 }
 
 static int mmc_send_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr)
@@ -934,6 +951,7 @@ static void mmc_read_scrs(struct mmc_host *host)
 		data.timeout_ns = card->csd.tacc_ns * 10;
 		data.timeout_clks = card->csd.tacc_clks * 10;
 		data.blksz_bits = 3;
+		data.blksz = 1 << 3;
 		data.blocks = 1;
 		data.flags = MMC_DATA_READ;
 		data.sg = &sg;
@@ -971,7 +989,8 @@ static unsigned int mmc_calculate_clock(struct mmc_host *host)
 		if (!mmc_card_dead(card) && max_dtr > card->csd.max_dtr)
 			max_dtr = card->csd.max_dtr;
 
-	pr_debug("MMC: selected %d.%03dMHz transfer rate\n",
+	pr_debug("%s: selected %d.%03dMHz transfer rate\n",
+		 mmc_hostname(host),
 		 max_dtr / 1000000, (max_dtr / 1000) % 1000);
 
 	return max_dtr;
@@ -1046,7 +1065,7 @@ static void mmc_setup(struct mmc_host *host)
 	} else {
 		host->ios.bus_mode = MMC_BUSMODE_OPENDRAIN;
 		host->ios.clock = host->f_min;
-		host->ops->set_ios(host, &host->ios);
+		mmc_set_ios(host);
 
 		/*
 		 * We should remember the OCR mask from the existing
@@ -1082,7 +1101,7 @@ static void mmc_setup(struct mmc_host *host)
 	 * Ok, now switch to push-pull mode.
 	 */
 	host->ios.bus_mode = MMC_BUSMODE_PUSHPULL;
-	host->ops->set_ios(host, &host->ios);
+	mmc_set_ios(host);
 
 	mmc_read_csds(host);
 
@@ -1128,7 +1147,7 @@ static void mmc_rescan(void *data)
 		 * attached cards and the host support.
 		 */
 		host->ios.clock = mmc_calculate_clock(host);
-		host->ops->set_ios(host, &host->ios);
+		mmc_set_ios(host);
 	}
 
 	mmc_release_host(host);
diff --git a/drivers/mmc/mmc_block.c b/drivers/mmc/mmc_block.c
index 8eb2a2ede64b..587458b370b9 100644
--- a/drivers/mmc/mmc_block.c
+++ b/drivers/mmc/mmc_block.c
@@ -175,6 +175,7 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
 		brq.data.timeout_ns = card->csd.tacc_ns * 10;
 		brq.data.timeout_clks = card->csd.tacc_clks * 10;
 		brq.data.blksz_bits = md->block_bits;
+		brq.data.blksz = 1 << md->block_bits;
 		brq.data.blocks = req->nr_sectors >> (md->block_bits - 9);
 		brq.stop.opcode = MMC_STOP_TRANSMISSION;
 		brq.stop.arg = 0;
@@ -187,6 +188,12 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
 			brq.cmd.opcode = MMC_WRITE_BLOCK;
 			brq.data.flags |= MMC_DATA_WRITE;
 			brq.data.blocks = 1;
+
+			/*
+			 * Scale up the timeout by the r2w factor
+			 */
+			brq.data.timeout_ns <<= card->csd.r2w_factor;
+			brq.data.timeout_clks <<= card->csd.r2w_factor;
 		}
 
 		if (brq.data.blocks > 1) {
@@ -346,7 +353,7 @@ static struct mmc_blk_data *mmc_blk_alloc(struct mmc_card *card)
 			 */
 			printk(KERN_ERR "%s: unable to select block size for "
 				"writing (rb%u wb%u rp%u wp%u)\n",
-				md->disk->disk_name,
+				mmc_card_id(card),
 				1 << card->csd.read_blkbits,
 				1 << card->csd.write_blkbits,
 				card->csd.read_partial,
diff --git a/drivers/mmc/mmci.c b/drivers/mmc/mmci.c
index df7e861e2fc7..da8e4d7339cc 100644
--- a/drivers/mmc/mmci.c
+++ b/drivers/mmc/mmci.c
@@ -402,9 +402,6 @@ static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	struct mmci_host *host = mmc_priv(mmc);
 	u32 clk = 0, pwr = 0;
 
-	DBG(host, "clock %uHz busmode %u powermode %u Vdd %u\n",
-	    ios->clock, ios->bus_mode, ios->power_mode, ios->vdd);
-
 	if (ios->clock) {
 		if (ios->clock >= host->mclk) {
 			clk = MCI_CLK_BYPASS;
diff --git a/drivers/mmc/pxamci.c b/drivers/mmc/pxamci.c
index eb9a8826e9b5..b49368fd96b8 100644
--- a/drivers/mmc/pxamci.c
+++ b/drivers/mmc/pxamci.c
@@ -65,11 +65,6 @@ struct pxamci_host {
 	unsigned int		dma_dir;
 };
 
-static inline unsigned int ns_to_clocks(unsigned int ns)
-{
-	return (ns * (CLOCKRATE / 1000000) + 999) / 1000;
-}
-
 static void pxamci_stop_clock(struct pxamci_host *host)
 {
 	if (readl(host->base + MMC_STAT) & STAT_CLK_EN) {
@@ -113,6 +108,7 @@ static void pxamci_disable_irq(struct pxamci_host *host, unsigned int mask)
 static void pxamci_setup_data(struct pxamci_host *host, struct mmc_data *data)
 {
 	unsigned int nob = data->blocks;
+	unsigned long long clks;
 	unsigned int timeout;
 	u32 dcmd;
 	int i;
@@ -123,9 +119,11 @@ static void pxamci_setup_data(struct pxamci_host *host, struct mmc_data *data)
 		nob = 0xffff;
 
 	writel(nob, host->base + MMC_NOB);
-	writel(1 << data->blksz_bits, host->base + MMC_BLKLEN);
+	writel(data->blksz, host->base + MMC_BLKLEN);
 
-	timeout = ns_to_clocks(data->timeout_ns) + data->timeout_clks;
+	clks = (unsigned long long)data->timeout_ns * CLOCKRATE;
+	do_div(clks, 1000000000UL);
+	timeout = (unsigned int)clks + (data->timeout_clks << host->clkrt);
 	writel((timeout + 255) / 256, host->base + MMC_RDTO);
 
 	if (data->flags & MMC_DATA_READ) {
@@ -200,7 +198,6 @@ static void pxamci_start_cmd(struct pxamci_host *host, struct mmc_command *cmd,
 
 static void pxamci_finish_request(struct pxamci_host *host, struct mmc_request *mrq)
 {
-	pr_debug("PXAMCI: request done\n");
 	host->mrq = NULL;
 	host->cmd = NULL;
 	host->data = NULL;
@@ -286,14 +283,14 @@ static int pxamci_data_done(struct pxamci_host *host, unsigned int stat)
 	 * data blocks as being in error.
 	 */
 	if (data->error == MMC_ERR_NONE)
-		data->bytes_xfered = data->blocks << data->blksz_bits;
+		data->bytes_xfered = data->blocks * data->blksz;
 	else
 		data->bytes_xfered = 0;
 
 	pxamci_disable_irq(host, DATA_TRAN_DONE);
 
 	host->data = NULL;
-	if (host->mrq->stop && data->error == MMC_ERR_NONE) {
+	if (host->mrq->stop) {
 		pxamci_stop_clock(host);
 		pxamci_start_cmd(host, host->mrq->stop, 0);
 	} else {
@@ -311,12 +308,10 @@ static irqreturn_t pxamci_irq(int irq, void *devid, struct pt_regs *regs)
 
 	ireg = readl(host->base + MMC_I_REG);
 
-	pr_debug("PXAMCI: irq %08x\n", ireg);
-
 	if (ireg) {
 		unsigned stat = readl(host->base + MMC_STAT);
 
-		pr_debug("PXAMCI: stat %08x\n", stat);
+		pr_debug("PXAMCI: irq %08x stat %08x\n", ireg, stat);
 
 		if (ireg & END_CMD_RES)
 			handled |= pxamci_cmd_done(host, stat);
@@ -370,10 +365,6 @@ static void pxamci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 {
 	struct pxamci_host *host = mmc_priv(mmc);
 
-	pr_debug("pxamci_set_ios: clock %u power %u vdd %u.%02u\n",
-		 ios->clock, ios->power_mode, ios->vdd / 100,
-		 ios->vdd % 100);
-
 	if (ios->clock) {
 		unsigned int clk = CLOCKRATE / ios->clock;
 		if (CLOCKRATE / clk > ios->clock)
@@ -399,7 +390,7 @@ static void pxamci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 			host->cmdat |= CMDAT_INIT;
 	}
 
-	pr_debug("pxamci_set_ios: clkrt = %x cmdat = %x\n",
+	pr_debug("PXAMCI: clkrt = %x cmdat = %x\n",
 		 host->clkrt, host->cmdat);
 }
 
diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c
index bdbfca050029..b0053280ff2d 100644
--- a/drivers/mmc/sdhci.c
+++ b/drivers/mmc/sdhci.c
@@ -570,10 +570,6 @@ static void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 
 	spin_lock_irqsave(&host->lock, flags);
 
-	DBG("clock %uHz busmode %u powermode %u cs %u Vdd %u width %u\n",
-	     ios->clock, ios->bus_mode, ios->power_mode, ios->chip_select,
-	     ios->vdd, ios->bus_width);
-
 	/*
 	 * Reset the chip on each power off.
 	 * Should clear out any weird states.
diff --git a/drivers/mmc/wbsd.c b/drivers/mmc/wbsd.c
index 511f7b0b31d2..8167332d4013 100644
--- a/drivers/mmc/wbsd.c
+++ b/drivers/mmc/wbsd.c
@@ -662,14 +662,14 @@ static void wbsd_prepare_data(struct wbsd_host *host, struct mmc_data *data)
 	unsigned long dmaflags;
 
 	DBGF("blksz %04x blks %04x flags %08x\n",
-		1 << data->blksz_bits, data->blocks, data->flags);
+		data->blksz, data->blocks, data->flags);
 	DBGF("tsac %d ms nsac %d clk\n",
 		data->timeout_ns / 1000000, data->timeout_clks);
 
 	/*
 	 * Calculate size.
 	 */
-	host->size = data->blocks << data->blksz_bits;
+	host->size = data->blocks * data->blksz;
 
 	/*
 	 * Check timeout values for overflow.
@@ -696,12 +696,12 @@ static void wbsd_prepare_data(struct wbsd_host *host, struct mmc_data *data)
 	 * Two bytes are needed for each data line.
 	 */
 	if (host->bus_width == MMC_BUS_WIDTH_1) {
-		blksize = (1 << data->blksz_bits) + 2;
+		blksize = data->blksz + 2;
 
 		wbsd_write_index(host, WBSD_IDX_PBSMSB, (blksize >> 4) & 0xF0);
 		wbsd_write_index(host, WBSD_IDX_PBSLSB, blksize & 0xFF);
 	} else if (host->bus_width == MMC_BUS_WIDTH_4) {
-		blksize = (1 << data->blksz_bits) + 2 * 4;
+		blksize = data->blksz + 2 * 4;
 
 		wbsd_write_index(host, WBSD_IDX_PBSMSB,
 			((blksize >> 4) & 0xF0) | WBSD_DATA_WIDTH);
@@ -931,10 +931,6 @@ static void wbsd_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	struct wbsd_host *host = mmc_priv(mmc);
 	u8 clk, setup, pwr;
 
-	DBGF("clock %uHz busmode %u powermode %u cs %u Vdd %u width %u\n",
-		ios->clock, ios->bus_mode, ios->power_mode, ios->chip_select,
-		ios->vdd, ios->bus_width);
-
 	spin_lock_bh(&host->lock);
 
 	/*
diff --git a/drivers/net/au1000_eth.c b/drivers/net/au1000_eth.c
index 1363083b4d83..14dbad14afb6 100644
--- a/drivers/net/au1000_eth.c
+++ b/drivers/net/au1000_eth.c
@@ -52,6 +52,7 @@
 #include <linux/mii.h>
 #include <linux/skbuff.h>
 #include <linux/delay.h>
+#include <linux/crc32.h>
 #include <asm/mipsregs.h>
 #include <asm/irq.h>
 #include <asm/io.h>
@@ -2070,23 +2071,6 @@ static void au1000_tx_timeout(struct net_device *dev)
 	netif_wake_queue(dev);
 }
 
-
-static unsigned const ethernet_polynomial = 0x04c11db7U;
-static inline u32 ether_crc(int length, unsigned char *data)
-{
-    int crc = -1;
-
-    while(--length >= 0) {
-		unsigned char current_octet = *data++;
-		int bit;
-		for (bit = 0; bit < 8; bit++, current_octet >>= 1)
-			crc = (crc << 1) ^
-				((crc < 0) ^ (current_octet & 1) ? 
-				 ethernet_polynomial : 0);
-    }
-    return crc;
-}
-
 static void set_rx_mode(struct net_device *dev)
 {
 	struct au1000_private *aup = (struct au1000_private *) dev->priv;
diff --git a/drivers/net/b44.c b/drivers/net/b44.c
index 3d306681919e..d8233e0b7899 100644
--- a/drivers/net/b44.c
+++ b/drivers/net/b44.c
@@ -650,9 +650,11 @@ static int b44_alloc_rx_skb(struct b44 *bp, int src_idx, u32 dest_idx_unmasked)
 
 	/* Hardware bug work-around, the chip is unable to do PCI DMA
 	   to/from anything above 1GB :-( */
-	if (mapping + RX_PKT_BUF_SZ > B44_DMA_MASK) {
+	if (dma_mapping_error(mapping) ||
+		mapping + RX_PKT_BUF_SZ > B44_DMA_MASK) {
 		/* Sigh... */
-		pci_unmap_single(bp->pdev, mapping, RX_PKT_BUF_SZ,PCI_DMA_FROMDEVICE);
+		if (!dma_mapping_error(mapping))
+			pci_unmap_single(bp->pdev, mapping, RX_PKT_BUF_SZ,PCI_DMA_FROMDEVICE);
 		dev_kfree_skb_any(skb);
 		skb = __dev_alloc_skb(RX_PKT_BUF_SZ,GFP_DMA);
 		if (skb == NULL)
@@ -660,8 +662,10 @@ static int b44_alloc_rx_skb(struct b44 *bp, int src_idx, u32 dest_idx_unmasked)
 		mapping = pci_map_single(bp->pdev, skb->data,
 					 RX_PKT_BUF_SZ,
 					 PCI_DMA_FROMDEVICE);
-		if (mapping + RX_PKT_BUF_SZ > B44_DMA_MASK) {
-			pci_unmap_single(bp->pdev, mapping, RX_PKT_BUF_SZ,PCI_DMA_FROMDEVICE);
+		if (dma_mapping_error(mapping) ||
+			mapping + RX_PKT_BUF_SZ > B44_DMA_MASK) {
+			if (!dma_mapping_error(mapping))
+				pci_unmap_single(bp->pdev, mapping, RX_PKT_BUF_SZ,PCI_DMA_FROMDEVICE);
 			dev_kfree_skb_any(skb);
 			return -ENOMEM;
 		}
@@ -967,9 +971,10 @@ static int b44_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	}
 
 	mapping = pci_map_single(bp->pdev, skb->data, len, PCI_DMA_TODEVICE);
-	if (mapping + len > B44_DMA_MASK) {
+	if (dma_mapping_error(mapping) || mapping + len > B44_DMA_MASK) {
 		/* Chip can't handle DMA to/from >1GB, use bounce buffer */
-		pci_unmap_single(bp->pdev, mapping, len, PCI_DMA_TODEVICE);
+		if (!dma_mapping_error(mapping))
+			pci_unmap_single(bp->pdev, mapping, len, PCI_DMA_TODEVICE);
 
 		bounce_skb = __dev_alloc_skb(TX_PKT_BUF_SZ,
 					     GFP_ATOMIC|GFP_DMA);
@@ -978,8 +983,9 @@ static int b44_start_xmit(struct sk_buff *skb, struct net_device *dev)
 
 		mapping = pci_map_single(bp->pdev, bounce_skb->data,
 					 len, PCI_DMA_TODEVICE);
-		if (mapping + len > B44_DMA_MASK) {
-			pci_unmap_single(bp->pdev, mapping,
+		if (dma_mapping_error(mapping) || mapping + len > B44_DMA_MASK) {
+			if (!dma_mapping_error(mapping))
+				pci_unmap_single(bp->pdev, mapping,
 					 len, PCI_DMA_TODEVICE);
 			dev_kfree_skb_any(bounce_skb);
 			goto err_out;
@@ -1203,7 +1209,8 @@ static int b44_alloc_consistent(struct b44 *bp)
 		                             DMA_TABLE_BYTES,
 		                             DMA_BIDIRECTIONAL);
 
-		if (rx_ring_dma + size > B44_DMA_MASK) {
+		if (dma_mapping_error(rx_ring_dma) ||
+			rx_ring_dma + size > B44_DMA_MASK) {
 			kfree(rx_ring);
 			goto out_err;
 		}
@@ -1229,7 +1236,8 @@ static int b44_alloc_consistent(struct b44 *bp)
 		                             DMA_TABLE_BYTES,
 		                             DMA_TO_DEVICE);
 
-		if (tx_ring_dma + size > B44_DMA_MASK) {
+		if (dma_mapping_error(tx_ring_dma) ||
+			tx_ring_dma + size > B44_DMA_MASK) {
 			kfree(tx_ring);
 			goto out_err;
 		}
diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index 5ca99e26660a..54161aef3cac 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -55,8 +55,8 @@
 
 #define DRV_MODULE_NAME		"bnx2"
 #define PFX DRV_MODULE_NAME	": "
-#define DRV_MODULE_VERSION	"1.4.39"
-#define DRV_MODULE_RELDATE	"March 22, 2006"
+#define DRV_MODULE_VERSION	"1.4.40"
+#define DRV_MODULE_RELDATE	"May 22, 2006"
 
 #define RUN_AT(x) (jiffies + (x))
 
@@ -2945,7 +2945,7 @@ bnx2_nvram_write(struct bnx2 *bp, u32 offset, u8 *data_buf,
 		int buf_size)
 {
 	u32 written, offset32, len32;
-	u8 *buf, start[4], end[4];
+	u8 *buf, start[4], end[4], *flash_buffer = NULL;
 	int rc = 0;
 	int align_start, align_end;
 
@@ -2985,12 +2985,19 @@ bnx2_nvram_write(struct bnx2 *bp, u32 offset, u8 *data_buf,
 		memcpy(buf + align_start, data_buf, buf_size);
 	}
 
+	if (bp->flash_info->buffered == 0) {
+		flash_buffer = kmalloc(264, GFP_KERNEL);
+		if (flash_buffer == NULL) {
+			rc = -ENOMEM;
+			goto nvram_write_end;
+		}
+	}
+
 	written = 0;
 	while ((written < len32) && (rc == 0)) {
 		u32 page_start, page_end, data_start, data_end;
 		u32 addr, cmd_flags;
 		int i;
-		u8 flash_buffer[264];
 
 	        /* Find the page_start addr */
 		page_start = offset32 + written;
@@ -3061,7 +3068,7 @@ bnx2_nvram_write(struct bnx2 *bp, u32 offset, u8 *data_buf,
 		}
 
 		/* Loop to write the new data from data_start to data_end */
-		for (addr = data_start; addr < data_end; addr += 4, i++) {
+		for (addr = data_start; addr < data_end; addr += 4, i += 4) {
 			if ((addr == page_end - 4) ||
 				((bp->flash_info->buffered) &&
 				 (addr == data_end - 4))) {
@@ -3109,6 +3116,9 @@ bnx2_nvram_write(struct bnx2 *bp, u32 offset, u8 *data_buf,
 	}
 
 nvram_write_end:
+	if (bp->flash_info->buffered == 0)
+		kfree(flash_buffer);
+
 	if (align_start || align_end)
 		kfree(buf);
 	return rc;
diff --git a/drivers/net/dl2k.c b/drivers/net/dl2k.c
index 1f3627470c95..038447fb5c5e 100644
--- a/drivers/net/dl2k.c
+++ b/drivers/net/dl2k.c
@@ -53,6 +53,7 @@
 #define DRV_VERSION	"v1.17b"
 #define DRV_RELDATE	"2006/03/10"
 #include "dl2k.h"
+#include <linux/dma-mapping.h>
 
 static char version[] __devinitdata =
       KERN_INFO DRV_NAME " " DRV_VERSION " " DRV_RELDATE "\n";	
@@ -765,7 +766,7 @@ rio_free_tx (struct net_device *dev, int irq)
 			break;
 		skb = np->tx_skbuff[entry];
 		pci_unmap_single (np->pdev,
-				  np->tx_ring[entry].fraginfo & 0xffffffffffff,
+				  np->tx_ring[entry].fraginfo & DMA_48BIT_MASK,
 				  skb->len, PCI_DMA_TODEVICE);
 		if (irq)
 			dev_kfree_skb_irq (skb);
@@ -893,7 +894,7 @@ receive_packet (struct net_device *dev)
 			/* Small skbuffs for short packets */
 			if (pkt_len > copy_thresh) {
 				pci_unmap_single (np->pdev,
-						  desc->fraginfo & 0xffffffffffff,
+						  desc->fraginfo & DMA_48BIT_MASK,
 						  np->rx_buf_sz,
 						  PCI_DMA_FROMDEVICE);
 				skb_put (skb = np->rx_skbuff[entry], pkt_len);
@@ -901,7 +902,7 @@ receive_packet (struct net_device *dev)
 			} else if ((skb = dev_alloc_skb (pkt_len + 2)) != NULL) {
 				pci_dma_sync_single_for_cpu(np->pdev,
 				  			    desc->fraginfo & 
-							    	0xffffffffffff,
+							    	DMA_48BIT_MASK,
 							    np->rx_buf_sz,
 							    PCI_DMA_FROMDEVICE);
 				skb->dev = dev;
@@ -913,7 +914,7 @@ receive_packet (struct net_device *dev)
 				skb_put (skb, pkt_len);
 				pci_dma_sync_single_for_device(np->pdev,
 				  			       desc->fraginfo &
-							       	 0xffffffffffff,
+							       	 DMA_48BIT_MASK,
 							       np->rx_buf_sz,
 							       PCI_DMA_FROMDEVICE);
 			}
@@ -1800,7 +1801,7 @@ rio_close (struct net_device *dev)
 		skb = np->rx_skbuff[i];
 		if (skb) {
 			pci_unmap_single(np->pdev, 
-					 np->rx_ring[i].fraginfo & 0xffffffffffff,
+					 np->rx_ring[i].fraginfo & DMA_48BIT_MASK,
 					 skb->len, PCI_DMA_FROMDEVICE);
 			dev_kfree_skb (skb);
 			np->rx_skbuff[i] = NULL;
@@ -1810,7 +1811,7 @@ rio_close (struct net_device *dev)
 		skb = np->tx_skbuff[i];
 		if (skb) {
 			pci_unmap_single(np->pdev, 
-					 np->tx_ring[i].fraginfo & 0xffffffffffff,
+					 np->tx_ring[i].fraginfo & DMA_48BIT_MASK,
 					 skb->len, PCI_DMA_TODEVICE);
 			dev_kfree_skb (skb);
 			np->tx_skbuff[i] = NULL;
diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c
index ecccca35c6f4..d1c705b412c2 100644
--- a/drivers/net/e1000/e1000_ethtool.c
+++ b/drivers/net/e1000/e1000_ethtool.c
@@ -870,13 +870,16 @@ e1000_intr_test(struct e1000_adapter *adapter, uint64_t *data)
 	*data = 0;
 
 	/* Hook up test interrupt handler just for this test */
- 	if (!request_irq(irq, &e1000_test_intr, 0, netdev->name, netdev)) {
+	if (!request_irq(irq, &e1000_test_intr, SA_PROBEIRQ, netdev->name,
+	                 netdev)) {
  		shared_int = FALSE;
  	} else if (request_irq(irq, &e1000_test_intr, SA_SHIRQ,
 			      netdev->name, netdev)){
 		*data = 1;
 		return -1;
 	}
+	DPRINTK(PROBE,INFO, "testing %s interrupt\n",
+	        (shared_int ? "shared" : "unshared"));
 
 	/* Disable all the interrupts */
 	E1000_WRITE_REG(&adapter->hw, IMC, 0xFFFFFFFF);
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index add8dc4aa7b0..97e71a4fe8eb 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -220,6 +220,7 @@ static void e1000_restore_vlan(struct e1000_adapter *adapter);
 static int e1000_suspend(struct pci_dev *pdev, pm_message_t state);
 static int e1000_resume(struct pci_dev *pdev);
 #endif
+static void e1000_shutdown(struct pci_dev *pdev);
 
 #ifdef CONFIG_NET_POLL_CONTROLLER
 /* for netdump / net console */
@@ -235,8 +236,9 @@ static struct pci_driver e1000_driver = {
 	/* Power Managment Hooks */
 #ifdef CONFIG_PM
 	.suspend  = e1000_suspend,
-	.resume   = e1000_resume
+	.resume   = e1000_resume,
 #endif
+	.shutdown = e1000_shutdown
 };
 
 MODULE_AUTHOR("Intel Corporation, <linux.nics@intel.com>");
@@ -3517,7 +3519,7 @@ e1000_clean_rx_irq(struct e1000_adapter *adapter,
 	buffer_info = &rx_ring->buffer_info[i];
 
 	while (rx_desc->status & E1000_RXD_STAT_DD) {
-		struct sk_buff *skb, *next_skb;
+		struct sk_buff *skb;
 		u8 status;
 #ifdef CONFIG_E1000_NAPI
 		if (*work_done >= work_to_do)
@@ -3535,8 +3537,6 @@ e1000_clean_rx_irq(struct e1000_adapter *adapter,
 		prefetch(next_rxd);
 
 		next_buffer = &rx_ring->buffer_info[i];
-		next_skb = next_buffer->skb;
-		prefetch(next_skb->data - NET_IP_ALIGN);
 
 		cleaned = TRUE;
 		cleaned_count++;
@@ -3666,7 +3666,7 @@ e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
 	struct e1000_buffer *buffer_info, *next_buffer;
 	struct e1000_ps_page *ps_page;
 	struct e1000_ps_page_dma *ps_page_dma;
-	struct sk_buff *skb, *next_skb;
+	struct sk_buff *skb;
 	unsigned int i, j;
 	uint32_t length, staterr;
 	int cleaned_count = 0;
@@ -3695,8 +3695,6 @@ e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
 		prefetch(next_rxd);
 
 		next_buffer = &rx_ring->buffer_info[i];
-		next_skb = next_buffer->skb;
-		prefetch(next_skb->data - NET_IP_ALIGN);
 
 		cleaned = TRUE;
 		cleaned_count++;
@@ -3768,6 +3766,7 @@ e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
 			ps_page->ps_page[j] = NULL;
 			skb->len += length;
 			skb->data_len += length;
+			skb->truesize += length;
 		}
 
 copydone:
@@ -4610,6 +4609,12 @@ e1000_resume(struct pci_dev *pdev)
 	return 0;
 }
 #endif
+
+static void e1000_shutdown(struct pci_dev *pdev)
+{
+	e1000_suspend(pdev, PMSG_SUSPEND);
+}
+
 #ifdef CONFIG_NET_POLL_CONTROLLER
 /*
  * Polling 'interrupt' - used by things like netconsole to send skbs
diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c
index 7627a75f4f7c..feb5b223cd60 100644
--- a/drivers/net/forcedeth.c
+++ b/drivers/net/forcedeth.c
@@ -105,6 +105,8 @@
  *	0.50: 20 Jan 2006: Add 8021pq tagging support.
  *	0.51: 20 Jan 2006: Add 64bit consistent memory allocation for rings.
  *	0.52: 20 Jan 2006: Add MSI/MSIX support.
+ *	0.53: 19 Mar 2006: Fix init from low power mode and add hw reset.
+ *	0.54: 21 Mar 2006: Fix spin locks for multi irqs and cleanup.
  *
  * Known bugs:
  * We suspect that on some hardware no TX done interrupts are generated.
@@ -116,7 +118,7 @@
  * DEV_NEED_TIMERIRQ will not harm you on sane hardware, only generating a few
  * superfluous timer interrupts from the nic.
  */
-#define FORCEDETH_VERSION		"0.52"
+#define FORCEDETH_VERSION		"0.54"
 #define DRV_NAME			"forcedeth"
 
 #include <linux/module.h>
@@ -160,6 +162,7 @@
 #define DEV_HAS_VLAN            0x0020  /* device supports vlan tagging and striping */
 #define DEV_HAS_MSI             0x0040  /* device supports MSI */
 #define DEV_HAS_MSI_X           0x0080  /* device supports MSI-X */
+#define DEV_HAS_POWER_CNTRL     0x0100  /* device supports power savings */
 
 enum {
 	NvRegIrqStatus = 0x000,
@@ -203,6 +206,8 @@ enum {
 #define NVREG_MISC1_HD		0x02
 #define NVREG_MISC1_FORCE	0x3b0f3c
 
+	NvRegMacReset = 0x3c,
+#define NVREG_MAC_RESET_ASSERT	0x0F3
 	NvRegTransmitterControl = 0x084,
 #define NVREG_XMITCTL_START	0x01
 	NvRegTransmitterStatus = 0x088,
@@ -326,6 +331,10 @@ enum {
 	NvRegMSIXMap0 = 0x3e0,
 	NvRegMSIXMap1 = 0x3e4,
 	NvRegMSIXIrqStatus = 0x3f0,
+
+	NvRegPowerState2 = 0x600,
+#define NVREG_POWERSTATE2_POWERUP_MASK		0x0F11
+#define NVREG_POWERSTATE2_POWERUP_REV_A3	0x0001
 };
 
 /* Big endian: should work, but is untested */
@@ -414,7 +423,8 @@ typedef union _ring_type {
 #define NV_RX3_VLAN_TAG_MASK	(0x0000FFFF)
 
 /* Miscelaneous hardware related defines: */
-#define NV_PCI_REGSZ		0x270
+#define NV_PCI_REGSZ_VER1      	0x270
+#define NV_PCI_REGSZ_VER2      	0x604
 
 /* various timeout delays: all in usec */
 #define NV_TXRX_RESET_DELAY	4
@@ -431,6 +441,7 @@ typedef union _ring_type {
 #define NV_MIIBUSY_DELAY	50
 #define NV_MIIPHY_DELAY	10
 #define NV_MIIPHY_DELAYMAX	10000
+#define NV_MAC_RESET_DELAY	64
 
 #define NV_WAKEUPPATTERNS	5
 #define NV_WAKEUPMASKENTRIES	4
@@ -552,6 +563,8 @@ struct fe_priv {
 	u32 desc_ver;
 	u32 txrxctl_bits;
 	u32 vlanctl_bits;
+	u32 driver_data;
+	u32 register_size;
 
 	void __iomem *base;
 
@@ -698,6 +711,72 @@ static void setup_hw_rings(struct net_device *dev, int rxtx_flags)
 	}
 }
 
+static int using_multi_irqs(struct net_device *dev)
+{
+	struct fe_priv *np = get_nvpriv(dev);
+
+	if (!(np->msi_flags & NV_MSI_X_ENABLED) ||
+	    ((np->msi_flags & NV_MSI_X_ENABLED) &&
+	     ((np->msi_flags & NV_MSI_X_VECTORS_MASK) == 0x1)))
+		return 0;
+	else
+		return 1;
+}
+
+static void nv_enable_irq(struct net_device *dev)
+{
+	struct fe_priv *np = get_nvpriv(dev);
+
+	if (!using_multi_irqs(dev)) {
+		if (np->msi_flags & NV_MSI_X_ENABLED)
+			enable_irq(np->msi_x_entry[NV_MSI_X_VECTOR_ALL].vector);
+		else
+			enable_irq(dev->irq);
+	} else {
+		enable_irq(np->msi_x_entry[NV_MSI_X_VECTOR_RX].vector);
+		enable_irq(np->msi_x_entry[NV_MSI_X_VECTOR_TX].vector);
+		enable_irq(np->msi_x_entry[NV_MSI_X_VECTOR_OTHER].vector);
+	}
+}
+
+static void nv_disable_irq(struct net_device *dev)
+{
+	struct fe_priv *np = get_nvpriv(dev);
+
+	if (!using_multi_irqs(dev)) {
+		if (np->msi_flags & NV_MSI_X_ENABLED)
+			disable_irq(np->msi_x_entry[NV_MSI_X_VECTOR_ALL].vector);
+		else
+			disable_irq(dev->irq);
+	} else {
+		disable_irq(np->msi_x_entry[NV_MSI_X_VECTOR_RX].vector);
+		disable_irq(np->msi_x_entry[NV_MSI_X_VECTOR_TX].vector);
+		disable_irq(np->msi_x_entry[NV_MSI_X_VECTOR_OTHER].vector);
+	}
+}
+
+/* In MSIX mode, a write to irqmask behaves as XOR */
+static void nv_enable_hw_interrupts(struct net_device *dev, u32 mask)
+{
+	u8 __iomem *base = get_hwbase(dev);
+
+	writel(mask, base + NvRegIrqMask);
+}
+
+static void nv_disable_hw_interrupts(struct net_device *dev, u32 mask)
+{
+	struct fe_priv *np = get_nvpriv(dev);
+	u8 __iomem *base = get_hwbase(dev);
+
+	if (np->msi_flags & NV_MSI_X_ENABLED) {
+		writel(mask, base + NvRegIrqMask);
+	} else {
+		if (np->msi_flags & NV_MSI_ENABLED)
+			writel(0, base + NvRegMSIIrqMask);
+		writel(0, base + NvRegIrqMask);
+	}
+}
+
 #define MII_READ	(-1)
 /* mii_rw: read/write a register on the PHY.
  *
@@ -919,6 +998,24 @@ static void nv_txrx_reset(struct net_device *dev)
 	pci_push(base);
 }
 
+static void nv_mac_reset(struct net_device *dev)
+{
+	struct fe_priv *np = netdev_priv(dev);
+	u8 __iomem *base = get_hwbase(dev);
+
+	dprintk(KERN_DEBUG "%s: nv_mac_reset\n", dev->name);
+	writel(NVREG_TXRXCTL_BIT2 | NVREG_TXRXCTL_RESET | np->txrxctl_bits, base + NvRegTxRxControl);
+	pci_push(base);
+	writel(NVREG_MAC_RESET_ASSERT, base + NvRegMacReset);
+	pci_push(base);
+	udelay(NV_MAC_RESET_DELAY);
+	writel(0, base + NvRegMacReset);
+	pci_push(base);
+	udelay(NV_MAC_RESET_DELAY);
+	writel(NVREG_TXRXCTL_BIT2 | np->txrxctl_bits, base + NvRegTxRxControl);
+	pci_push(base);
+}
+
 /*
  * nv_get_stats: dev->get_stats function
  * Get latest stats value from the nic.
@@ -989,24 +1086,25 @@ static void nv_do_rx_refill(unsigned long data)
 	struct net_device *dev = (struct net_device *) data;
 	struct fe_priv *np = netdev_priv(dev);
 
-
-	if (!(np->msi_flags & NV_MSI_X_ENABLED) ||
-	    ((np->msi_flags & NV_MSI_X_ENABLED) && 
-	     ((np->msi_flags & NV_MSI_X_VECTORS_MASK) == 0x1))) {
-		disable_irq(dev->irq);
+	if (!using_multi_irqs(dev)) {
+		if (np->msi_flags & NV_MSI_X_ENABLED)
+			disable_irq(np->msi_x_entry[NV_MSI_X_VECTOR_ALL].vector);
+		else
+			disable_irq(dev->irq);
 	} else {
 		disable_irq(np->msi_x_entry[NV_MSI_X_VECTOR_RX].vector);
 	}
 	if (nv_alloc_rx(dev)) {
-		spin_lock(&np->lock);
+		spin_lock_irq(&np->lock);
 		if (!np->in_shutdown)
 			mod_timer(&np->oom_kick, jiffies + OOM_REFILL);
-		spin_unlock(&np->lock);
+		spin_unlock_irq(&np->lock);
 	}
-	if (!(np->msi_flags & NV_MSI_X_ENABLED) ||
-	    ((np->msi_flags & NV_MSI_X_ENABLED) && 
-	     ((np->msi_flags & NV_MSI_X_VECTORS_MASK) == 0x1))) {
-		enable_irq(dev->irq);
+	if (!using_multi_irqs(dev)) {
+		if (np->msi_flags & NV_MSI_X_ENABLED)
+			enable_irq(np->msi_x_entry[NV_MSI_X_VECTOR_ALL].vector);
+		else
+			enable_irq(dev->irq);
 	} else {
 		enable_irq(np->msi_x_entry[NV_MSI_X_VECTOR_RX].vector);
 	}
@@ -1331,7 +1429,7 @@ static void nv_tx_timeout(struct net_device *dev)
 				dev->name, (unsigned long)np->ring_addr,
 				np->next_tx, np->nic_tx);
 		printk(KERN_INFO "%s: Dumping tx registers\n", dev->name);
-		for (i=0;i<0x400;i+= 32) {
+		for (i=0;i<=np->register_size;i+= 32) {
 			printk(KERN_INFO "%3x: %08x %08x %08x %08x %08x %08x %08x %08x\n",
 					i,
 					readl(base + i + 0), readl(base + i + 4),
@@ -1638,15 +1736,7 @@ static int nv_change_mtu(struct net_device *dev, int new_mtu)
 		 * guessed, there is probably a simpler approach.
 		 * Changing the MTU is a rare event, it shouldn't matter.
 		 */
-		if (!(np->msi_flags & NV_MSI_X_ENABLED) ||
-		    ((np->msi_flags & NV_MSI_X_ENABLED) && 
-		     ((np->msi_flags & NV_MSI_X_VECTORS_MASK) == 0x1))) {
-			disable_irq(dev->irq);
-		} else {
-			disable_irq(np->msi_x_entry[NV_MSI_X_VECTOR_RX].vector);
-			disable_irq(np->msi_x_entry[NV_MSI_X_VECTOR_TX].vector);
-			disable_irq(np->msi_x_entry[NV_MSI_X_VECTOR_OTHER].vector);
-		}
+		nv_disable_irq(dev);
 		spin_lock_bh(&dev->xmit_lock);
 		spin_lock(&np->lock);
 		/* stop engines */
@@ -1679,15 +1769,7 @@ static int nv_change_mtu(struct net_device *dev, int new_mtu)
 		nv_start_tx(dev);
 		spin_unlock(&np->lock);
 		spin_unlock_bh(&dev->xmit_lock);
-		if (!(np->msi_flags & NV_MSI_X_ENABLED) ||
-		    ((np->msi_flags & NV_MSI_X_ENABLED) && 
-		     ((np->msi_flags & NV_MSI_X_VECTORS_MASK) == 0x1))) {
-			enable_irq(dev->irq);
-		} else {
-			enable_irq(np->msi_x_entry[NV_MSI_X_VECTOR_RX].vector);
-			enable_irq(np->msi_x_entry[NV_MSI_X_VECTOR_TX].vector);
-			enable_irq(np->msi_x_entry[NV_MSI_X_VECTOR_OTHER].vector);
-		}
+		nv_enable_irq(dev);
 	}
 	return 0;
 }
@@ -2078,16 +2160,16 @@ static irqreturn_t nv_nic_irq_tx(int foo, void *data, struct pt_regs *regs)
 		if (!(events & np->irqmask))
 			break;
 
-		spin_lock(&np->lock);
+		spin_lock_irq(&np->lock);
 		nv_tx_done(dev);
-		spin_unlock(&np->lock);
+		spin_unlock_irq(&np->lock);
 		
 		if (events & (NVREG_IRQ_TX_ERR)) {
 			dprintk(KERN_DEBUG "%s: received irq with events 0x%x. Probably TX fail.\n",
 						dev->name, events);
 		}
 		if (i > max_interrupt_work) {
-			spin_lock(&np->lock);
+			spin_lock_irq(&np->lock);
 			/* disable interrupts on the nic */
 			writel(NVREG_IRQ_TX_ALL, base + NvRegIrqMask);
 			pci_push(base);
@@ -2097,7 +2179,7 @@ static irqreturn_t nv_nic_irq_tx(int foo, void *data, struct pt_regs *regs)
 				mod_timer(&np->nic_poll, jiffies + POLL_WAIT);
 			}
 			printk(KERN_DEBUG "%s: too many iterations (%d) in nv_nic_irq_tx.\n", dev->name, i);
-			spin_unlock(&np->lock);
+			spin_unlock_irq(&np->lock);
 			break;
 		}
 
@@ -2127,14 +2209,14 @@ static irqreturn_t nv_nic_irq_rx(int foo, void *data, struct pt_regs *regs)
 		
 		nv_rx_process(dev);
 		if (nv_alloc_rx(dev)) {
-			spin_lock(&np->lock);
+			spin_lock_irq(&np->lock);
 			if (!np->in_shutdown)
 				mod_timer(&np->oom_kick, jiffies + OOM_REFILL);
-			spin_unlock(&np->lock);
+			spin_unlock_irq(&np->lock);
 		}
 		
 		if (i > max_interrupt_work) {
-			spin_lock(&np->lock);
+			spin_lock_irq(&np->lock);
 			/* disable interrupts on the nic */
 			writel(NVREG_IRQ_RX_ALL, base + NvRegIrqMask);
 			pci_push(base);
@@ -2144,7 +2226,7 @@ static irqreturn_t nv_nic_irq_rx(int foo, void *data, struct pt_regs *regs)
 				mod_timer(&np->nic_poll, jiffies + POLL_WAIT);
 			}
 			printk(KERN_DEBUG "%s: too many iterations (%d) in nv_nic_irq_rx.\n", dev->name, i);
-			spin_unlock(&np->lock);
+			spin_unlock_irq(&np->lock);
 			break;
 		}
 
@@ -2173,14 +2255,14 @@ static irqreturn_t nv_nic_irq_other(int foo, void *data, struct pt_regs *regs)
 			break;
 		
 		if (events & NVREG_IRQ_LINK) {
-			spin_lock(&np->lock);
+			spin_lock_irq(&np->lock);
 			nv_link_irq(dev);
-			spin_unlock(&np->lock);
+			spin_unlock_irq(&np->lock);
 		}
 		if (np->need_linktimer && time_after(jiffies, np->link_timeout)) {
-			spin_lock(&np->lock);
+			spin_lock_irq(&np->lock);
 			nv_linkchange(dev);
-			spin_unlock(&np->lock);
+			spin_unlock_irq(&np->lock);
 			np->link_timeout = jiffies + LINK_TIMEOUT;
 		}
 		if (events & (NVREG_IRQ_UNKNOWN)) {
@@ -2188,7 +2270,7 @@ static irqreturn_t nv_nic_irq_other(int foo, void *data, struct pt_regs *regs)
 						dev->name, events);
 		}
 		if (i > max_interrupt_work) {
-			spin_lock(&np->lock);
+			spin_lock_irq(&np->lock);
 			/* disable interrupts on the nic */
 			writel(NVREG_IRQ_OTHER, base + NvRegIrqMask);
 			pci_push(base);
@@ -2198,7 +2280,7 @@ static irqreturn_t nv_nic_irq_other(int foo, void *data, struct pt_regs *regs)
 				mod_timer(&np->nic_poll, jiffies + POLL_WAIT);
 			}
 			printk(KERN_DEBUG "%s: too many iterations (%d) in nv_nic_irq_other.\n", dev->name, i);
-			spin_unlock(&np->lock);
+			spin_unlock_irq(&np->lock);
 			break;
 		}
 
@@ -2221,10 +2303,11 @@ static void nv_do_nic_poll(unsigned long data)
 	 * nv_nic_irq because that may decide to do otherwise
 	 */
 
-	if (!(np->msi_flags & NV_MSI_X_ENABLED) ||
-	    ((np->msi_flags & NV_MSI_X_ENABLED) && 
-	     ((np->msi_flags & NV_MSI_X_VECTORS_MASK) == 0x1))) {
-		disable_irq(dev->irq);
+	if (!using_multi_irqs(dev)) {
+		if (np->msi_flags & NV_MSI_X_ENABLED)
+			disable_irq(np->msi_x_entry[NV_MSI_X_VECTOR_ALL].vector);
+		else
+			disable_irq(dev->irq);
 		mask = np->irqmask;
 	} else {
 		if (np->nic_poll_irq & NVREG_IRQ_RX_ALL) {
@@ -2247,11 +2330,12 @@ static void nv_do_nic_poll(unsigned long data)
 	writel(mask, base + NvRegIrqMask);
 	pci_push(base);
 
-	if (!(np->msi_flags & NV_MSI_X_ENABLED) || 
-	    ((np->msi_flags & NV_MSI_X_ENABLED) && 
-	     ((np->msi_flags & NV_MSI_X_VECTORS_MASK) == 0x1))) {
+	if (!using_multi_irqs(dev)) {
 		nv_nic_irq((int) 0, (void *) data, (struct pt_regs *) NULL);
-		enable_irq(dev->irq);
+		if (np->msi_flags & NV_MSI_X_ENABLED)
+			enable_irq(np->msi_x_entry[NV_MSI_X_VECTOR_ALL].vector);
+		else
+			enable_irq(dev->irq);
 	} else {
 		if (np->nic_poll_irq & NVREG_IRQ_RX_ALL) {
 			nv_nic_irq_rx((int) 0, (void *) data, (struct pt_regs *) NULL);
@@ -2488,11 +2572,11 @@ static int nv_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
 }
 
 #define FORCEDETH_REGS_VER	1
-#define FORCEDETH_REGS_SIZE	0x400 /* 256 32-bit registers */
 
 static int nv_get_regs_len(struct net_device *dev)
 {
-	return FORCEDETH_REGS_SIZE;
+	struct fe_priv *np = netdev_priv(dev);
+	return np->register_size;
 }
 
 static void nv_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *buf)
@@ -2504,7 +2588,7 @@ static void nv_get_regs(struct net_device *dev, struct ethtool_regs *regs, void
 
 	regs->version = FORCEDETH_REGS_VER;
 	spin_lock_irq(&np->lock);
-	for (i=0;i<FORCEDETH_REGS_SIZE/sizeof(u32);i++)
+	for (i = 0;i <= np->register_size/sizeof(u32); i++)
 		rbuf[i] = readl(base + i*sizeof(u32));
 	spin_unlock_irq(&np->lock);
 }
@@ -2531,6 +2615,18 @@ static int nv_nway_reset(struct net_device *dev)
 	return ret;
 }
 
+#ifdef NETIF_F_TSO
+static int nv_set_tso(struct net_device *dev, u32 value)
+{
+	struct fe_priv *np = netdev_priv(dev);
+
+	if ((np->driver_data & DEV_HAS_CHECKSUM))
+		return ethtool_op_set_tso(dev, value);
+	else
+		return value ? -EOPNOTSUPP : 0;
+}
+#endif
+
 static struct ethtool_ops ops = {
 	.get_drvinfo = nv_get_drvinfo,
 	.get_link = ethtool_op_get_link,
@@ -2542,6 +2638,10 @@ static struct ethtool_ops ops = {
 	.get_regs = nv_get_regs,
 	.nway_reset = nv_nway_reset,
 	.get_perm_addr = ethtool_op_get_perm_addr,
+#ifdef NETIF_F_TSO
+	.get_tso = ethtool_op_get_tso,
+	.set_tso = nv_set_tso
+#endif
 };
 
 static void nv_vlan_rx_register(struct net_device *dev, struct vlan_group *grp)
@@ -2598,6 +2698,113 @@ static void set_msix_vector_map(struct net_device *dev, u32 vector, u32 irqmask)
 	writel(readl(base + NvRegMSIXMap1) | msixmap, base + NvRegMSIXMap1);
 }
 
+static int nv_request_irq(struct net_device *dev)
+{
+	struct fe_priv *np = get_nvpriv(dev);
+	u8 __iomem *base = get_hwbase(dev);
+	int ret = 1;
+	int i;
+
+	if (np->msi_flags & NV_MSI_X_CAPABLE) {
+		for (i = 0; i < (np->msi_flags & NV_MSI_X_VECTORS_MASK); i++) {
+			np->msi_x_entry[i].entry = i;
+		}
+		if ((ret = pci_enable_msix(np->pci_dev, np->msi_x_entry, (np->msi_flags & NV_MSI_X_VECTORS_MASK))) == 0) {
+			np->msi_flags |= NV_MSI_X_ENABLED;
+			if (optimization_mode == NV_OPTIMIZATION_MODE_THROUGHPUT) {
+				/* Request irq for rx handling */
+				if (request_irq(np->msi_x_entry[NV_MSI_X_VECTOR_RX].vector, &nv_nic_irq_rx, SA_SHIRQ, dev->name, dev) != 0) {
+					printk(KERN_INFO "forcedeth: request_irq failed for rx %d\n", ret);
+					pci_disable_msix(np->pci_dev);
+					np->msi_flags &= ~NV_MSI_X_ENABLED;
+					goto out_err;
+				}
+				/* Request irq for tx handling */
+				if (request_irq(np->msi_x_entry[NV_MSI_X_VECTOR_TX].vector, &nv_nic_irq_tx, SA_SHIRQ, dev->name, dev) != 0) {
+					printk(KERN_INFO "forcedeth: request_irq failed for tx %d\n", ret);
+					pci_disable_msix(np->pci_dev);
+					np->msi_flags &= ~NV_MSI_X_ENABLED;
+					goto out_free_rx;
+				}
+				/* Request irq for link and timer handling */
+				if (request_irq(np->msi_x_entry[NV_MSI_X_VECTOR_OTHER].vector, &nv_nic_irq_other, SA_SHIRQ, dev->name, dev) != 0) {
+					printk(KERN_INFO "forcedeth: request_irq failed for link %d\n", ret);
+					pci_disable_msix(np->pci_dev);
+					np->msi_flags &= ~NV_MSI_X_ENABLED;
+					goto out_free_tx;
+				}
+				/* map interrupts to their respective vector */
+				writel(0, base + NvRegMSIXMap0);
+				writel(0, base + NvRegMSIXMap1);
+				set_msix_vector_map(dev, NV_MSI_X_VECTOR_RX, NVREG_IRQ_RX_ALL);
+				set_msix_vector_map(dev, NV_MSI_X_VECTOR_TX, NVREG_IRQ_TX_ALL);
+				set_msix_vector_map(dev, NV_MSI_X_VECTOR_OTHER, NVREG_IRQ_OTHER);
+			} else {
+				/* Request irq for all interrupts */
+				if (request_irq(np->msi_x_entry[NV_MSI_X_VECTOR_ALL].vector, &nv_nic_irq, SA_SHIRQ, dev->name, dev) != 0) {
+					printk(KERN_INFO "forcedeth: request_irq failed %d\n", ret);
+					pci_disable_msix(np->pci_dev);
+					np->msi_flags &= ~NV_MSI_X_ENABLED;
+					goto out_err;
+				}
+
+				/* map interrupts to vector 0 */
+				writel(0, base + NvRegMSIXMap0);
+				writel(0, base + NvRegMSIXMap1);
+			}
+		}
+	}
+	if (ret != 0 && np->msi_flags & NV_MSI_CAPABLE) {
+		if ((ret = pci_enable_msi(np->pci_dev)) == 0) {
+			np->msi_flags |= NV_MSI_ENABLED;
+			if (request_irq(np->pci_dev->irq, &nv_nic_irq, SA_SHIRQ, dev->name, dev) != 0) {
+				printk(KERN_INFO "forcedeth: request_irq failed %d\n", ret);
+				pci_disable_msi(np->pci_dev);
+				np->msi_flags &= ~NV_MSI_ENABLED;
+				goto out_err;
+			}
+
+			/* map interrupts to vector 0 */
+			writel(0, base + NvRegMSIMap0);
+			writel(0, base + NvRegMSIMap1);
+			/* enable msi vector 0 */
+			writel(NVREG_MSI_VECTOR_0_ENABLED, base + NvRegMSIIrqMask);
+		}
+	}
+	if (ret != 0) {
+		if (request_irq(np->pci_dev->irq, &nv_nic_irq, SA_SHIRQ, dev->name, dev) != 0)
+			goto out_err;
+	}
+
+	return 0;
+out_free_tx:
+	free_irq(np->msi_x_entry[NV_MSI_X_VECTOR_TX].vector, dev);
+out_free_rx:
+	free_irq(np->msi_x_entry[NV_MSI_X_VECTOR_RX].vector, dev);
+out_err:
+	return 1;
+}
+
+static void nv_free_irq(struct net_device *dev)
+{
+	struct fe_priv *np = get_nvpriv(dev);
+	int i;
+
+	if (np->msi_flags & NV_MSI_X_ENABLED) {
+		for (i = 0; i < (np->msi_flags & NV_MSI_X_VECTORS_MASK); i++) {
+			free_irq(np->msi_x_entry[i].vector, dev);
+		}
+		pci_disable_msix(np->pci_dev);
+		np->msi_flags &= ~NV_MSI_X_ENABLED;
+	} else {
+		free_irq(np->pci_dev->irq, dev);
+		if (np->msi_flags & NV_MSI_ENABLED) {
+			pci_disable_msi(np->pci_dev);
+			np->msi_flags &= ~NV_MSI_ENABLED;
+		}
+	}
+}
+
 static int nv_open(struct net_device *dev)
 {
 	struct fe_priv *np = netdev_priv(dev);
@@ -2608,6 +2815,8 @@ static int nv_open(struct net_device *dev)
 	dprintk(KERN_DEBUG "nv_open: begin\n");
 
 	/* 1) erase previous misconfiguration */
+	if (np->driver_data & DEV_HAS_POWER_CNTRL)
+		nv_mac_reset(dev);
 	/* 4.1-1: stop adapter: ignored, 4.3 seems to be overkill */
 	writel(NVREG_MCASTADDRA_FORCE, base + NvRegMulticastAddrA);
 	writel(0, base + NvRegMulticastAddrB);
@@ -2688,86 +2897,18 @@ static int nv_open(struct net_device *dev)
 	udelay(10);
 	writel(readl(base + NvRegPowerState) | NVREG_POWERSTATE_VALID, base + NvRegPowerState);
 
-	writel(0, base + NvRegIrqMask);
+	nv_disable_hw_interrupts(dev, np->irqmask);
 	pci_push(base);
 	writel(NVREG_MIISTAT_MASK2, base + NvRegMIIStatus);
 	writel(NVREG_IRQSTAT_MASK, base + NvRegIrqStatus);
 	pci_push(base);
 
-	if (np->msi_flags & NV_MSI_X_CAPABLE) {
-		for (i = 0; i < (np->msi_flags & NV_MSI_X_VECTORS_MASK); i++) {
-			np->msi_x_entry[i].entry = i;
-		}
-		if ((ret = pci_enable_msix(np->pci_dev, np->msi_x_entry, (np->msi_flags & NV_MSI_X_VECTORS_MASK))) == 0) {
-			np->msi_flags |= NV_MSI_X_ENABLED;
-			if (optimization_mode == NV_OPTIMIZATION_MODE_THROUGHPUT) {
-				/* Request irq for rx handling */
-				if (request_irq(np->msi_x_entry[NV_MSI_X_VECTOR_RX].vector, &nv_nic_irq_rx, SA_SHIRQ, dev->name, dev) != 0) {
-					printk(KERN_INFO "forcedeth: request_irq failed for rx %d\n", ret);
-					pci_disable_msix(np->pci_dev);
-					np->msi_flags &= ~NV_MSI_X_ENABLED;
-					goto out_drain;
-				}
-				/* Request irq for tx handling */
-				if (request_irq(np->msi_x_entry[NV_MSI_X_VECTOR_TX].vector, &nv_nic_irq_tx, SA_SHIRQ, dev->name, dev) != 0) {
-					printk(KERN_INFO "forcedeth: request_irq failed for tx %d\n", ret);
-					pci_disable_msix(np->pci_dev);
-					np->msi_flags &= ~NV_MSI_X_ENABLED;
-					goto out_drain;
-				}
-				/* Request irq for link and timer handling */
-				if (request_irq(np->msi_x_entry[NV_MSI_X_VECTOR_OTHER].vector, &nv_nic_irq_other, SA_SHIRQ, dev->name, dev) != 0) {
-					printk(KERN_INFO "forcedeth: request_irq failed for link %d\n", ret);
-					pci_disable_msix(np->pci_dev);
-					np->msi_flags &= ~NV_MSI_X_ENABLED;
-					goto out_drain;
-				}
-
-				/* map interrupts to their respective vector */
-				writel(0, base + NvRegMSIXMap0);
-				writel(0, base + NvRegMSIXMap1);
-				set_msix_vector_map(dev, NV_MSI_X_VECTOR_RX, NVREG_IRQ_RX_ALL);
-				set_msix_vector_map(dev, NV_MSI_X_VECTOR_TX, NVREG_IRQ_TX_ALL);
-				set_msix_vector_map(dev, NV_MSI_X_VECTOR_OTHER, NVREG_IRQ_OTHER);
-			} else {
-				/* Request irq for all interrupts */
-				if (request_irq(np->msi_x_entry[NV_MSI_X_VECTOR_ALL].vector, &nv_nic_irq, SA_SHIRQ, dev->name, dev) != 0) {
-					printk(KERN_INFO "forcedeth: request_irq failed %d\n", ret);
-					pci_disable_msix(np->pci_dev);
-					np->msi_flags &= ~NV_MSI_X_ENABLED;
-					goto out_drain;
-				}
-
-				/* map interrupts to vector 0 */
-				writel(0, base + NvRegMSIXMap0);
-				writel(0, base + NvRegMSIXMap1);
-			}
-		}
-	}
-	if (ret != 0 && np->msi_flags & NV_MSI_CAPABLE) {
-		if ((ret = pci_enable_msi(np->pci_dev)) == 0) {
-			np->msi_flags |= NV_MSI_ENABLED;
-			if (request_irq(np->pci_dev->irq, &nv_nic_irq, SA_SHIRQ, dev->name, dev) != 0) {
-				printk(KERN_INFO "forcedeth: request_irq failed %d\n", ret);
-				pci_disable_msi(np->pci_dev);
-				np->msi_flags &= ~NV_MSI_ENABLED;
-				goto out_drain;
-			}
-
-			/* map interrupts to vector 0 */
-			writel(0, base + NvRegMSIMap0);
-			writel(0, base + NvRegMSIMap1);
-			/* enable msi vector 0 */
-			writel(NVREG_MSI_VECTOR_0_ENABLED, base + NvRegMSIIrqMask);
-		}
-	}
-	if (ret != 0) {
-		if (request_irq(np->pci_dev->irq, &nv_nic_irq, SA_SHIRQ, dev->name, dev) != 0)
-			goto out_drain;
+	if (nv_request_irq(dev)) {
+		goto out_drain;
 	}
 
 	/* ask for interrupts */
-	writel(np->irqmask, base + NvRegIrqMask);
+	nv_enable_hw_interrupts(dev, np->irqmask);
 
 	spin_lock_irq(&np->lock);
 	writel(NVREG_MCASTADDRA_FORCE, base + NvRegMulticastAddrA);
@@ -2811,7 +2952,6 @@ static int nv_close(struct net_device *dev)
 {
 	struct fe_priv *np = netdev_priv(dev);
 	u8 __iomem *base;
-	int i;
 
 	spin_lock_irq(&np->lock);
 	np->in_shutdown = 1;
@@ -2829,31 +2969,13 @@ static int nv_close(struct net_device *dev)
 
 	/* disable interrupts on the nic or we will lock up */
 	base = get_hwbase(dev);
-	if (np->msi_flags & NV_MSI_X_ENABLED) {
-		writel(np->irqmask, base + NvRegIrqMask);
-	} else {
-		if (np->msi_flags & NV_MSI_ENABLED)
-			writel(0, base + NvRegMSIIrqMask);
-		writel(0, base + NvRegIrqMask);
-	}
+	nv_disable_hw_interrupts(dev, np->irqmask);
 	pci_push(base);
 	dprintk(KERN_INFO "%s: Irqmask is zero again\n", dev->name);
 
 	spin_unlock_irq(&np->lock);
 
-	if (np->msi_flags & NV_MSI_X_ENABLED) {
-		for (i = 0; i < (np->msi_flags & NV_MSI_X_VECTORS_MASK); i++) {
-			free_irq(np->msi_x_entry[i].vector, dev);
-		}
-		pci_disable_msix(np->pci_dev);
-		np->msi_flags &= ~NV_MSI_X_ENABLED;
-	} else {
-		free_irq(np->pci_dev->irq, dev);
-		if (np->msi_flags & NV_MSI_ENABLED) {
-			pci_disable_msi(np->pci_dev);
-			np->msi_flags &= ~NV_MSI_ENABLED;
-		}
-	}
+	nv_free_irq(dev);
 
 	drain_ring(dev);
 
@@ -2878,6 +3000,7 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i
 	unsigned long addr;
 	u8 __iomem *base;
 	int err, i;
+	u32 powerstate;
 
 	dev = alloc_etherdev(sizeof(struct fe_priv));
 	err = -ENOMEM;
@@ -2910,6 +3033,11 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i
 	if (err < 0)
 		goto out_disable;
 
+	if (id->driver_data & (DEV_HAS_VLAN|DEV_HAS_MSI_X|DEV_HAS_POWER_CNTRL))
+		np->register_size = NV_PCI_REGSZ_VER2;
+	else
+		np->register_size = NV_PCI_REGSZ_VER1;
+
 	err = -EINVAL;
 	addr = 0;
 	for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
@@ -2918,7 +3046,7 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i
 				pci_resource_len(pci_dev, i),
 				pci_resource_flags(pci_dev, i));
 		if (pci_resource_flags(pci_dev, i) & IORESOURCE_MEM &&
-				pci_resource_len(pci_dev, i) >= NV_PCI_REGSZ) {
+				pci_resource_len(pci_dev, i) >= np->register_size) {
 			addr = pci_resource_start(pci_dev, i);
 			break;
 		}
@@ -2929,24 +3057,25 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i
 		goto out_relreg;
 	}
 
+	/* copy of driver data */
+	np->driver_data = id->driver_data;
+
 	/* handle different descriptor versions */
 	if (id->driver_data & DEV_HAS_HIGH_DMA) {
 		/* packet format 3: supports 40-bit addressing */
 		np->desc_ver = DESC_VER_3;
+		np->txrxctl_bits = NVREG_TXRXCTL_DESC_3;
 		if (pci_set_dma_mask(pci_dev, DMA_39BIT_MASK)) {
 			printk(KERN_INFO "forcedeth: 64-bit DMA failed, using 32-bit addressing for device %s.\n",
 					pci_name(pci_dev));
 		} else {
-			if (pci_set_consistent_dma_mask(pci_dev, 0x0000007fffffffffULL)) {
-				printk(KERN_INFO "forcedeth: 64-bit DMA (consistent) failed for device %s.\n",
-					pci_name(pci_dev));
-				goto out_relreg;
-			} else {
-				dev->features |= NETIF_F_HIGHDMA;
-				printk(KERN_INFO "forcedeth: using HIGHDMA\n");
-			}
+			dev->features |= NETIF_F_HIGHDMA;
+			printk(KERN_INFO "forcedeth: using HIGHDMA\n");
+		}
+		if (pci_set_consistent_dma_mask(pci_dev, 0x0000007fffffffffULL)) {
+			printk(KERN_INFO "forcedeth: 64-bit DMA (consistent) failed for device %s.\n",
+			       pci_name(pci_dev));
 		}
-		np->txrxctl_bits = NVREG_TXRXCTL_DESC_3;
 	} else if (id->driver_data & DEV_HAS_LARGEDESC) {
 		/* packet format 2: supports jumbo frames */
 		np->desc_ver = DESC_VER_2;
@@ -2986,7 +3115,7 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i
 	}
 
 	err = -ENOMEM;
-	np->base = ioremap(addr, NV_PCI_REGSZ);
+	np->base = ioremap(addr, np->register_size);
 	if (!np->base)
 		goto out_relreg;
 	dev->base_addr = (unsigned long)np->base;
@@ -3062,6 +3191,20 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i
 	writel(0, base + NvRegWakeUpFlags);
 	np->wolenabled = 0;
 
+	if (id->driver_data & DEV_HAS_POWER_CNTRL) {
+		u8 revision_id;
+		pci_read_config_byte(pci_dev, PCI_REVISION_ID, &revision_id);
+
+		/* take phy and nic out of low power mode */
+		powerstate = readl(base + NvRegPowerState2);
+		powerstate &= ~NVREG_POWERSTATE2_POWERUP_MASK;
+		if ((id->device == PCI_DEVICE_ID_NVIDIA_NVENET_12 ||
+		     id->device == PCI_DEVICE_ID_NVIDIA_NVENET_13) &&
+		    revision_id >= 0xA3)
+			powerstate |= NVREG_POWERSTATE2_POWERUP_REV_A3;
+		writel(powerstate, base + NvRegPowerState2);
+	}
+
 	if (np->desc_ver == DESC_VER_1) {
 		np->tx_flags = NV_TX_VALID;
 	} else {
@@ -3223,19 +3366,19 @@ static struct pci_device_id pci_tbl[] = {
 	},
 	{	/* MCP51 Ethernet Controller */
 		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_12),
-		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA,
+		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL,
 	},
 	{	/* MCP51 Ethernet Controller */
 		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_13),
-		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA,
+		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL,
 	},
 	{	/* MCP55 Ethernet Controller */
 		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_14),
-		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_VLAN|DEV_HAS_MSI|DEV_HAS_MSI_X,
+		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_VLAN|DEV_HAS_MSI|DEV_HAS_MSI_X|DEV_HAS_POWER_CNTRL,
 	},
 	{	/* MCP55 Ethernet Controller */
 		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_15),
-		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_VLAN|DEV_HAS_MSI|DEV_HAS_MSI_X,
+		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_VLAN|DEV_HAS_MSI|DEV_HAS_MSI_X|DEV_HAS_POWER_CNTRL,
 	},
 	{0,},
 };
diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c
index 771e25d8c417..218d31764c52 100644
--- a/drivers/net/gianfar.c
+++ b/drivers/net/gianfar.c
@@ -210,7 +210,8 @@ static int gfar_probe(struct platform_device *pdev)
 		goto regs_fail;
 	}
 
-	spin_lock_init(&priv->lock);
+	spin_lock_init(&priv->txlock);
+	spin_lock_init(&priv->rxlock);
 
 	platform_set_drvdata(pdev, dev);
 
@@ -515,11 +516,13 @@ void stop_gfar(struct net_device *dev)
 	phy_stop(priv->phydev);
 
 	/* Lock it down */
-	spin_lock_irqsave(&priv->lock, flags);
+	spin_lock_irqsave(&priv->txlock, flags);
+	spin_lock(&priv->rxlock);
 
 	gfar_halt(dev);
 
-	spin_unlock_irqrestore(&priv->lock, flags);
+	spin_unlock(&priv->rxlock);
+	spin_unlock_irqrestore(&priv->txlock, flags);
 
 	/* Free the IRQs */
 	if (priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_MULTI_INTR) {
@@ -605,14 +608,15 @@ void gfar_start(struct net_device *dev)
 	tempval |= DMACTRL_INIT_SETTINGS;
 	gfar_write(&priv->regs->dmactrl, tempval);
 
-	/* Clear THLT, so that the DMA starts polling now */
-	gfar_write(&regs->tstat, TSTAT_CLEAR_THALT);
-
 	/* Make sure we aren't stopped */
 	tempval = gfar_read(&priv->regs->dmactrl);
 	tempval &= ~(DMACTRL_GRS | DMACTRL_GTS);
 	gfar_write(&priv->regs->dmactrl, tempval);
 
+	/* Clear THLT/RHLT, so that the DMA starts polling now */
+	gfar_write(&regs->tstat, TSTAT_CLEAR_THALT);
+	gfar_write(&regs->rstat, RSTAT_CLEAR_RHALT);
+
 	/* Unmask the interrupts we look for */
 	gfar_write(&regs->imask, IMASK_DEFAULT);
 }
@@ -928,12 +932,13 @@ static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	struct txfcb *fcb = NULL;
 	struct txbd8 *txbdp;
 	u16 status;
+	unsigned long flags;
 
 	/* Update transmit stats */
 	priv->stats.tx_bytes += skb->len;
 
 	/* Lock priv now */
-	spin_lock_irq(&priv->lock);
+	spin_lock_irqsave(&priv->txlock, flags);
 
 	/* Point at the first free tx descriptor */
 	txbdp = priv->cur_tx;
@@ -1004,7 +1009,7 @@ static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	gfar_write(&priv->regs->tstat, TSTAT_CLEAR_THALT);
 
 	/* Unlock priv */
-	spin_unlock_irq(&priv->lock);
+	spin_unlock_irqrestore(&priv->txlock, flags);
 
 	return 0;
 }
@@ -1049,7 +1054,7 @@ static void gfar_vlan_rx_register(struct net_device *dev,
 	unsigned long flags;
 	u32 tempval;
 
-	spin_lock_irqsave(&priv->lock, flags);
+	spin_lock_irqsave(&priv->rxlock, flags);
 
 	priv->vlgrp = grp;
 
@@ -1076,7 +1081,7 @@ static void gfar_vlan_rx_register(struct net_device *dev,
 		gfar_write(&priv->regs->rctrl, tempval);
 	}
 
-	spin_unlock_irqrestore(&priv->lock, flags);
+	spin_unlock_irqrestore(&priv->rxlock, flags);
 }
 
 
@@ -1085,12 +1090,12 @@ static void gfar_vlan_rx_kill_vid(struct net_device *dev, uint16_t vid)
 	struct gfar_private *priv = netdev_priv(dev);
 	unsigned long flags;
 
-	spin_lock_irqsave(&priv->lock, flags);
+	spin_lock_irqsave(&priv->rxlock, flags);
 
 	if (priv->vlgrp)
 		priv->vlgrp->vlan_devices[vid] = NULL;
 
-	spin_unlock_irqrestore(&priv->lock, flags);
+	spin_unlock_irqrestore(&priv->rxlock, flags);
 }
 
 
@@ -1179,7 +1184,7 @@ static irqreturn_t gfar_transmit(int irq, void *dev_id, struct pt_regs *regs)
 	gfar_write(&priv->regs->ievent, IEVENT_TX_MASK);
 
 	/* Lock priv */
-	spin_lock(&priv->lock);
+	spin_lock(&priv->txlock);
 	bdp = priv->dirty_tx;
 	while ((bdp->status & TXBD_READY) == 0) {
 		/* If dirty_tx and cur_tx are the same, then either the */
@@ -1224,7 +1229,7 @@ static irqreturn_t gfar_transmit(int irq, void *dev_id, struct pt_regs *regs)
 	else
 		gfar_write(&priv->regs->txic, 0);
 
-	spin_unlock(&priv->lock);
+	spin_unlock(&priv->txlock);
 
 	return IRQ_HANDLED;
 }
@@ -1305,9 +1310,10 @@ irqreturn_t gfar_receive(int irq, void *dev_id, struct pt_regs *regs)
 {
 	struct net_device *dev = (struct net_device *) dev_id;
 	struct gfar_private *priv = netdev_priv(dev);
-
 #ifdef CONFIG_GFAR_NAPI
 	u32 tempval;
+#else
+	unsigned long flags;
 #endif
 
 	/* Clear IEVENT, so rx interrupt isn't called again
@@ -1330,7 +1336,7 @@ irqreturn_t gfar_receive(int irq, void *dev_id, struct pt_regs *regs)
 	}
 #else
 
-	spin_lock(&priv->lock);
+	spin_lock_irqsave(&priv->rxlock, flags);
 	gfar_clean_rx_ring(dev, priv->rx_ring_size);
 
 	/* If we are coalescing interrupts, update the timer */
@@ -1341,7 +1347,7 @@ irqreturn_t gfar_receive(int irq, void *dev_id, struct pt_regs *regs)
 	else
 		gfar_write(&priv->regs->rxic, 0);
 
-	spin_unlock(&priv->lock);
+	spin_unlock_irqrestore(&priv->rxlock, flags);
 #endif
 
 	return IRQ_HANDLED;
@@ -1490,13 +1496,6 @@ int gfar_clean_rx_ring(struct net_device *dev, int rx_work_limit)
 	/* Update the current rxbd pointer to be the next one */
 	priv->cur_rx = bdp;
 
-	/* If no packets have arrived since the
-	 * last one we processed, clear the IEVENT RX and
-	 * BSY bits so that another interrupt won't be
-	 * generated when we set IMASK */
-	if (bdp->status & RXBD_EMPTY)
-		gfar_write(&priv->regs->ievent, IEVENT_RX_MASK);
-
 	return howmany;
 }
 
@@ -1516,7 +1515,7 @@ static int gfar_poll(struct net_device *dev, int *budget)
 	rx_work_limit -= howmany;
 	*budget -= howmany;
 
-	if (rx_work_limit >= 0) {
+	if (rx_work_limit > 0) {
 		netif_rx_complete(dev);
 
 		/* Clear the halt bit in RSTAT */
@@ -1533,7 +1532,8 @@ static int gfar_poll(struct net_device *dev, int *budget)
 			gfar_write(&priv->regs->rxic, 0);
 	}
 
-	return (rx_work_limit < 0) ? 1 : 0;
+	/* Return 1 if there's more work to do */
+	return (rx_work_limit > 0) ? 0 : 1;
 }
 #endif
 
@@ -1629,7 +1629,7 @@ static void adjust_link(struct net_device *dev)
 	struct phy_device *phydev = priv->phydev;
 	int new_state = 0;
 
-	spin_lock_irqsave(&priv->lock, flags);
+	spin_lock_irqsave(&priv->txlock, flags);
 	if (phydev->link) {
 		u32 tempval = gfar_read(&regs->maccfg2);
 		u32 ecntrl = gfar_read(&regs->ecntrl);
@@ -1694,7 +1694,7 @@ static void adjust_link(struct net_device *dev)
 	if (new_state && netif_msg_link(priv))
 		phy_print_status(phydev);
 
-	spin_unlock_irqrestore(&priv->lock, flags);
+	spin_unlock_irqrestore(&priv->txlock, flags);
 }
 
 /* Update the hash table based on the current list of multicast
diff --git a/drivers/net/gianfar.h b/drivers/net/gianfar.h
index d37d5401be6e..127c98cf3336 100644
--- a/drivers/net/gianfar.h
+++ b/drivers/net/gianfar.h
@@ -656,43 +656,62 @@ struct gfar {
  * the buffer descriptor determines the actual condition.
  */
 struct gfar_private {
-	/* pointers to arrays of skbuffs for tx and rx */
+	/* Fields controlled by TX lock */
+	spinlock_t txlock;
+
+	/* Pointer to the array of skbuffs */
 	struct sk_buff ** tx_skbuff;
-	struct sk_buff ** rx_skbuff;
 
-	/* indices pointing to the next free sbk in skb arrays */
+	/* next free skb in the array */
 	u16 skb_curtx;
-	u16 skb_currx;
 
-	/* index of the first skb which hasn't been transmitted
-	 * yet. */
+	/* First skb in line to be transmitted */
 	u16 skb_dirtytx;
 
 	/* Configuration info for the coalescing features */
 	unsigned char txcoalescing;
 	unsigned short txcount;
 	unsigned short txtime;
+
+	/* Buffer descriptor pointers */
+	struct txbd8 *tx_bd_base;	/* First tx buffer descriptor */
+	struct txbd8 *cur_tx;	        /* Next free ring entry */
+	struct txbd8 *dirty_tx;		/* First buffer in line
+					   to be transmitted */
+	unsigned int tx_ring_size;
+
+	/* RX Locked fields */
+	spinlock_t rxlock;
+
+	/* skb array and index */
+	struct sk_buff ** rx_skbuff;
+	u16 skb_currx;
+
+	/* RX Coalescing values */
 	unsigned char rxcoalescing;
 	unsigned short rxcount;
 	unsigned short rxtime;
 
-	/* GFAR addresses */
-	struct rxbd8 *rx_bd_base;	/* Base addresses of Rx and Tx Buffers */
-	struct txbd8 *tx_bd_base;
+	struct rxbd8 *rx_bd_base;	/* First Rx buffers */
 	struct rxbd8 *cur_rx;           /* Next free rx ring entry */
-	struct txbd8 *cur_tx;	        /* Next free ring entry */
-	struct txbd8 *dirty_tx;		/* The Ring entry to be freed. */
-	struct gfar __iomem *regs;	/* Pointer to the GFAR memory mapped Registers */
-	u32 __iomem *hash_regs[16];
-	int hash_width;
-	struct net_device_stats stats; /* linux network statistics */
-	struct gfar_extra_stats extra_stats;
-	spinlock_t lock;
+
+	/* RX parameters */
+	unsigned int rx_ring_size;
 	unsigned int rx_buffer_size;
 	unsigned int rx_stash_size;
 	unsigned int rx_stash_index;
-	unsigned int tx_ring_size;
-	unsigned int rx_ring_size;
+
+	struct vlan_group *vlgrp;
+
+	/* Unprotected fields */
+	/* Pointer to the GFAR memory mapped Registers */
+	struct gfar __iomem *regs;
+
+	/* Hash registers and their width */
+	u32 __iomem *hash_regs[16];
+	int hash_width;
+
+	/* global parameters */
 	unsigned int fifo_threshold;
 	unsigned int fifo_starve;
 	unsigned int fifo_starve_off;
@@ -702,13 +721,15 @@ struct gfar_private {
 		extended_hash:1,
 		bd_stash_en:1;
 	unsigned short padding;
-	struct vlan_group *vlgrp;
-	/* Info structure initialized by board setup code */
+
 	unsigned int interruptTransmit;
 	unsigned int interruptReceive;
 	unsigned int interruptError;
+
+	/* info structure initialized by platform code */
 	struct gianfar_platform_data *einfo;
 
+	/* PHY stuff */
 	struct phy_device *phydev;
 	struct mii_bus *mii_bus;
 	int oldspeed;
@@ -716,6 +737,10 @@ struct gfar_private {
 	int oldlink;
 
 	uint32_t msg_enable;
+
+	/* Network Statistics */
+	struct net_device_stats stats;
+	struct gfar_extra_stats extra_stats;
 };
 
 static inline u32 gfar_read(volatile unsigned __iomem *addr)
diff --git a/drivers/net/gianfar_ethtool.c b/drivers/net/gianfar_ethtool.c
index 5de7b2e259dc..d69698c695ef 100644
--- a/drivers/net/gianfar_ethtool.c
+++ b/drivers/net/gianfar_ethtool.c
@@ -455,10 +455,14 @@ static int gfar_sringparam(struct net_device *dev, struct ethtool_ringparam *rva
 
 		/* Halt TX and RX, and process the frames which
 		 * have already been received */
-		spin_lock_irqsave(&priv->lock, flags);
+		spin_lock_irqsave(&priv->txlock, flags);
+		spin_lock(&priv->rxlock);
+
 		gfar_halt(dev);
 		gfar_clean_rx_ring(dev, priv->rx_ring_size);
-		spin_unlock_irqrestore(&priv->lock, flags);
+
+		spin_unlock(&priv->rxlock);
+		spin_unlock_irqrestore(&priv->txlock, flags);
 
 		/* Now we take down the rings to rebuild them */
 		stop_gfar(dev);
@@ -488,10 +492,14 @@ static int gfar_set_rx_csum(struct net_device *dev, uint32_t data)
 
 		/* Halt TX and RX, and process the frames which
 		 * have already been received */
-		spin_lock_irqsave(&priv->lock, flags);
+		spin_lock_irqsave(&priv->txlock, flags);
+		spin_lock(&priv->rxlock);
+
 		gfar_halt(dev);
 		gfar_clean_rx_ring(dev, priv->rx_ring_size);
-		spin_unlock_irqrestore(&priv->lock, flags);
+
+		spin_unlock(&priv->rxlock);
+		spin_unlock_irqrestore(&priv->txlock, flags);
 
 		/* Now we take down the rings to rebuild them */
 		stop_gfar(dev);
@@ -523,7 +531,7 @@ static int gfar_set_tx_csum(struct net_device *dev, uint32_t data)
 	if (!(priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_CSUM))
 		return -EOPNOTSUPP;
 
-	spin_lock_irqsave(&priv->lock, flags);
+	spin_lock_irqsave(&priv->txlock, flags);
 	gfar_halt(dev);
 
 	if (data)
@@ -532,7 +540,7 @@ static int gfar_set_tx_csum(struct net_device *dev, uint32_t data)
 		dev->features &= ~NETIF_F_IP_CSUM;
 
 	gfar_start(dev);
-	spin_unlock_irqrestore(&priv->lock, flags);
+	spin_unlock_irqrestore(&priv->txlock, flags);
 
 	return 0;
 }
diff --git a/drivers/net/gianfar_sysfs.c b/drivers/net/gianfar_sysfs.c
index 51ef181b1368..a6d5c43199cb 100644
--- a/drivers/net/gianfar_sysfs.c
+++ b/drivers/net/gianfar_sysfs.c
@@ -82,7 +82,7 @@ static ssize_t gfar_set_bd_stash(struct class_device *cdev,
 	else
 		return count;
 
-	spin_lock_irqsave(&priv->lock, flags);
+	spin_lock_irqsave(&priv->rxlock, flags);
 
 	/* Set the new stashing value */
 	priv->bd_stash_en = new_setting;
@@ -96,7 +96,7 @@ static ssize_t gfar_set_bd_stash(struct class_device *cdev,
 
 	gfar_write(&priv->regs->attr, temp);
 
-	spin_unlock_irqrestore(&priv->lock, flags);
+	spin_unlock_irqrestore(&priv->rxlock, flags);
 
 	return count;
 }
@@ -118,7 +118,7 @@ static ssize_t gfar_set_rx_stash_size(struct class_device *cdev,
 	u32 temp;
 	unsigned long flags;
 
-	spin_lock_irqsave(&priv->lock, flags);
+	spin_lock_irqsave(&priv->rxlock, flags);
 	if (length > priv->rx_buffer_size)
 		return count;
 
@@ -142,7 +142,7 @@ static ssize_t gfar_set_rx_stash_size(struct class_device *cdev,
 
 	gfar_write(&priv->regs->attr, temp);
 
-	spin_unlock_irqrestore(&priv->lock, flags);
+	spin_unlock_irqrestore(&priv->rxlock, flags);
 
 	return count;
 }
@@ -166,7 +166,7 @@ static ssize_t gfar_set_rx_stash_index(struct class_device *cdev,
 	u32 temp;
 	unsigned long flags;
 
-	spin_lock_irqsave(&priv->lock, flags);
+	spin_lock_irqsave(&priv->rxlock, flags);
 	if (index > priv->rx_stash_size)
 		return count;
 
@@ -180,7 +180,7 @@ static ssize_t gfar_set_rx_stash_index(struct class_device *cdev,
 	temp |= ATTRELI_EI(index);
 	gfar_write(&priv->regs->attreli, flags);
 
-	spin_unlock_irqrestore(&priv->lock, flags);
+	spin_unlock_irqrestore(&priv->rxlock, flags);
 
 	return count;
 }
@@ -205,7 +205,7 @@ static ssize_t gfar_set_fifo_threshold(struct class_device *cdev,
 	if (length > GFAR_MAX_FIFO_THRESHOLD)
 		return count;
 
-	spin_lock_irqsave(&priv->lock, flags);
+	spin_lock_irqsave(&priv->txlock, flags);
 
 	priv->fifo_threshold = length;
 
@@ -214,7 +214,7 @@ static ssize_t gfar_set_fifo_threshold(struct class_device *cdev,
 	temp |= length;
 	gfar_write(&priv->regs->fifo_tx_thr, temp);
 
-	spin_unlock_irqrestore(&priv->lock, flags);
+	spin_unlock_irqrestore(&priv->txlock, flags);
 
 	return count;
 }
@@ -240,7 +240,7 @@ static ssize_t gfar_set_fifo_starve(struct class_device *cdev,
 	if (num > GFAR_MAX_FIFO_STARVE)
 		return count;
 
-	spin_lock_irqsave(&priv->lock, flags);
+	spin_lock_irqsave(&priv->txlock, flags);
 
 	priv->fifo_starve = num;
 
@@ -249,7 +249,7 @@ static ssize_t gfar_set_fifo_starve(struct class_device *cdev,
 	temp |= num;
 	gfar_write(&priv->regs->fifo_tx_starve, temp);
 
-	spin_unlock_irqrestore(&priv->lock, flags);
+	spin_unlock_irqrestore(&priv->txlock, flags);
 
 	return count;
 }
@@ -274,7 +274,7 @@ static ssize_t gfar_set_fifo_starve_off(struct class_device *cdev,
 	if (num > GFAR_MAX_FIFO_STARVE_OFF)
 		return count;
 
-	spin_lock_irqsave(&priv->lock, flags);
+	spin_lock_irqsave(&priv->txlock, flags);
 
 	priv->fifo_starve_off = num;
 
@@ -283,7 +283,7 @@ static ssize_t gfar_set_fifo_starve_off(struct class_device *cdev,
 	temp |= num;
 	gfar_write(&priv->regs->fifo_tx_starve_shutoff, temp);
 
-	spin_unlock_irqrestore(&priv->lock, flags);
+	spin_unlock_irqrestore(&priv->txlock, flags);
 
 	return count;
 }
diff --git a/drivers/net/hamradio/dmascc.c b/drivers/net/hamradio/dmascc.c
index 79a8fbcf5f93..0d5fccc984bb 100644
--- a/drivers/net/hamradio/dmascc.c
+++ b/drivers/net/hamradio/dmascc.c
@@ -582,7 +582,6 @@ static int __init setup_adapter(int card_base, int type, int n)
 		INIT_WORK(&priv->rx_work, rx_bh, priv);
 		dev->priv = priv;
 		sprintf(dev->name, "dmascc%i", 2 * n + i);
-		SET_MODULE_OWNER(dev);
 		dev->base_addr = card_base;
 		dev->irq = irq;
 		dev->open = scc_open;
diff --git a/drivers/net/hamradio/scc.c b/drivers/net/hamradio/scc.c
index 6ace0e914fd1..5927784df3f9 100644
--- a/drivers/net/hamradio/scc.c
+++ b/drivers/net/hamradio/scc.c
@@ -1550,7 +1550,6 @@ static unsigned char ax25_nocall[AX25_ADDR_LEN] =
 
 static void scc_net_setup(struct net_device *dev)
 {
-	SET_MODULE_OWNER(dev);
 	dev->tx_queue_len    = 16;	/* should be enough... */
 
 	dev->open            = scc_net_open;
diff --git a/drivers/net/hamradio/yam.c b/drivers/net/hamradio/yam.c
index fe22479eb202..b49884048caa 100644
--- a/drivers/net/hamradio/yam.c
+++ b/drivers/net/hamradio/yam.c
@@ -1098,7 +1098,6 @@ static void yam_setup(struct net_device *dev)
 
 	dev->base_addr = yp->iobase;
 	dev->irq = yp->irq;
-	SET_MODULE_OWNER(dev);
 
 	dev->open = yam_open;
 	dev->stop = yam_close;
diff --git a/drivers/net/irda/Kconfig b/drivers/net/irda/Kconfig
index 5e6d00752990..cff8598aa800 100644
--- a/drivers/net/irda/Kconfig
+++ b/drivers/net/irda/Kconfig
@@ -33,7 +33,7 @@ config DONGLE
 
 config ESI_DONGLE
 	tristate "ESI JetEye PC dongle"
-	depends on DONGLE && IRDA
+	depends on IRTTY_SIR && DONGLE && IRDA
 	help
 	  Say Y here if you want to build support for the Extended Systems
 	  JetEye PC dongle.  To compile it as a module, choose M here. The ESI
@@ -44,7 +44,7 @@ config ESI_DONGLE
 
 config ACTISYS_DONGLE
 	tristate "ACTiSYS IR-220L and IR220L+ dongle"
-	depends on DONGLE && IRDA
+	depends on IRTTY_SIR && DONGLE && IRDA
 	help
 	  Say Y here if you want to build support for the ACTiSYS IR-220L and
 	  IR220L+ dongles.  To compile it as a module, choose M here. The
@@ -55,7 +55,7 @@ config ACTISYS_DONGLE
 
 config TEKRAM_DONGLE
 	tristate "Tekram IrMate 210B dongle"
-	depends on DONGLE && IRDA
+	depends on IRTTY_SIR && DONGLE && IRDA
 	help
 	  Say Y here if you want to build support for the Tekram IrMate 210B
 	  dongle.  To compile it as a module, choose M here. The Tekram dongle
@@ -66,7 +66,7 @@ config TEKRAM_DONGLE
 
 config TOIM3232_DONGLE
 	tristate "TOIM3232 IrDa dongle"
-	depends on DONGLE && IRDA
+	depends on IRTTY_SIR && DONGLE && IRDA
 	help
 	  Say Y here if you want to build support for the Vishay/Temic
 	  TOIM3232 and TOIM4232 based dongles.
@@ -74,7 +74,7 @@ config TOIM3232_DONGLE
 
 config LITELINK_DONGLE
 	tristate "Parallax LiteLink dongle"
-	depends on DONGLE && IRDA
+	depends on IRTTY_SIR && DONGLE && IRDA
 	help
 	  Say Y here if you want to build support for the Parallax Litelink
 	  dongle.  To compile it as a module, choose M here.  The Parallax
@@ -85,7 +85,7 @@ config LITELINK_DONGLE
 
 config MA600_DONGLE
 	tristate "Mobile Action MA600 dongle"
-	depends on DONGLE && IRDA && EXPERIMENTAL
+	depends on IRTTY_SIR && DONGLE && IRDA && EXPERIMENTAL
 	help
 	  Say Y here if you want to build support for the Mobile Action MA600
 	  dongle.  To compile it as a module, choose M here. The MA600 dongle
@@ -98,7 +98,7 @@ config MA600_DONGLE
 
 config GIRBIL_DONGLE
 	tristate "Greenwich GIrBIL dongle"
-	depends on DONGLE && IRDA && EXPERIMENTAL
+	depends on IRTTY_SIR && DONGLE && IRDA && EXPERIMENTAL
 	help
 	  Say Y here if you want to build support for the Greenwich GIrBIL
 	  dongle.  If you want to compile it as a module, choose M here.
@@ -109,7 +109,7 @@ config GIRBIL_DONGLE
 
 config MCP2120_DONGLE
 	tristate "Microchip MCP2120"
-	depends on DONGLE && IRDA && EXPERIMENTAL
+	depends on IRTTY_SIR && DONGLE && IRDA && EXPERIMENTAL
 	help
 	  Say Y here if you want to build support for the Microchip MCP2120
 	  dongle.  If you want to compile it as a module, choose M here.
@@ -123,7 +123,7 @@ config MCP2120_DONGLE
 
 config OLD_BELKIN_DONGLE
 	tristate "Old Belkin dongle"
-	depends on DONGLE && IRDA && EXPERIMENTAL
+	depends on IRTTY_SIR && DONGLE && IRDA && EXPERIMENTAL
 	help
 	  Say Y here if you want to build support for the Adaptec Airport 1000
 	  and 2000 dongles.  If you want to compile it as a module, choose
@@ -132,7 +132,7 @@ config OLD_BELKIN_DONGLE
 
 config ACT200L_DONGLE
 	tristate "ACTiSYS IR-200L dongle"
-	depends on DONGLE && IRDA && EXPERIMENTAL
+	depends on IRTTY_SIR && DONGLE && IRDA && EXPERIMENTAL
 	help
 	  Say Y here if you want to build support for the ACTiSYS IR-200L
 	  dongle. If you want to compile it as a module, choose M here.
diff --git a/drivers/net/irda/Makefile b/drivers/net/irda/Makefile
index 27ab75f20799..c1ce2398efea 100644
--- a/drivers/net/irda/Makefile
+++ b/drivers/net/irda/Makefile
@@ -46,4 +46,4 @@ obj-$(CONFIG_MA600_DONGLE)	+= ma600-sir.o
 obj-$(CONFIG_TOIM3232_DONGLE)	+= toim3232-sir.o
 
 # The SIR helper module
-sir-dev-objs := sir_dev.o sir_dongle.o sir_kthread.o
+sir-dev-objs := sir_dev.o sir_dongle.o
diff --git a/drivers/net/irda/irda-usb.c b/drivers/net/irda/irda-usb.c
index 606243d11793..cd87593e4e8a 100644
--- a/drivers/net/irda/irda-usb.c
+++ b/drivers/net/irda/irda-usb.c
@@ -1778,7 +1778,7 @@ static int irda_usb_probe(struct usb_interface *intf,
 
 	if (self->needspatch) {
 		ret = usb_control_msg (self->usbdev, usb_sndctrlpipe (self->usbdev, 0),
-				       0x02, 0x40, 0, 0, 0, 0, msecs_to_jiffies(500));
+				       0x02, 0x40, 0, 0, NULL, 0, 500);
 		if (ret < 0) {
 			IRDA_DEBUG (0, "usb_control_msg failed %d\n", ret);
 			goto err_out_3;
@@ -1815,14 +1815,14 @@ static int irda_usb_probe(struct usb_interface *intf,
 		self->needspatch = (ret < 0);
 		if (ret < 0) {
 			printk("patch_device failed\n");
-			goto err_out_4;
+			goto err_out_5;
 		}
 
 		/* replace IrDA class descriptor with what patched device is now reporting */
 		irda_desc = irda_usb_find_class_desc (self->usbintf);
 		if (irda_desc == NULL) {
 			ret = -ENODEV;
-			goto err_out_4;
+			goto err_out_5;
 		}
 		if (self->irda_desc)
 			kfree (self->irda_desc);
@@ -1832,6 +1832,8 @@ static int irda_usb_probe(struct usb_interface *intf,
 
 	return 0;
 
+err_out_5:
+	unregister_netdev(self->netdev);
 err_out_4:
 	kfree(self->speed_buff);
 err_out_3:
diff --git a/drivers/net/irda/sir-dev.h b/drivers/net/irda/sir-dev.h
index f69fb4cec76f..9fa294a546d6 100644
--- a/drivers/net/irda/sir-dev.h
+++ b/drivers/net/irda/sir-dev.h
@@ -15,23 +15,14 @@
 #define IRDA_SIR_H
 
 #include <linux/netdevice.h>
+#include <linux/workqueue.h>
 
 #include <net/irda/irda.h>
 #include <net/irda/irda_device.h>		// iobuff_t
 
-/* FIXME: unify irda_request with sir_fsm! */
-
-struct irda_request {
-	struct list_head lh_request;
-	unsigned long pending;
-	void (*func)(void *);
-	void *data;
-	struct timer_list timer;
-};
-
 struct sir_fsm {
 	struct semaphore	sem;
-	struct irda_request	rq;
+	struct work_struct      work;
 	unsigned		state, substate;
 	int			param;
 	int			result;
diff --git a/drivers/net/irda/sir_dev.c b/drivers/net/irda/sir_dev.c
index ea7c9464d46a..3b5854d10c17 100644
--- a/drivers/net/irda/sir_dev.c
+++ b/drivers/net/irda/sir_dev.c
@@ -23,6 +23,298 @@
 
 #include "sir-dev.h"
 
+
+static struct workqueue_struct *irda_sir_wq;
+
+/* STATE MACHINE */
+
+/* substate handler of the config-fsm to handle the cases where we want
+ * to wait for transmit completion before changing the port configuration
+ */
+
+static int sirdev_tx_complete_fsm(struct sir_dev *dev)
+{
+	struct sir_fsm *fsm = &dev->fsm;
+	unsigned next_state, delay;
+	unsigned bytes_left;
+
+	do {
+		next_state = fsm->substate;	/* default: stay in current substate */
+		delay = 0;
+
+		switch(fsm->substate) {
+
+		case SIRDEV_STATE_WAIT_XMIT:
+			if (dev->drv->chars_in_buffer)
+				bytes_left = dev->drv->chars_in_buffer(dev);
+			else
+				bytes_left = 0;
+			if (!bytes_left) {
+				next_state = SIRDEV_STATE_WAIT_UNTIL_SENT;
+				break;
+			}
+
+			if (dev->speed > 115200)
+				delay = (bytes_left*8*10000) / (dev->speed/100);
+			else if (dev->speed > 0)
+				delay = (bytes_left*10*10000) / (dev->speed/100);
+			else
+				delay = 0;
+			/* expected delay (usec) until remaining bytes are sent */
+			if (delay < 100) {
+				udelay(delay);
+				delay = 0;
+				break;
+			}
+			/* sleep some longer delay (msec) */
+			delay = (delay+999) / 1000;
+			break;
+
+		case SIRDEV_STATE_WAIT_UNTIL_SENT:
+			/* block until underlaying hardware buffer are empty */
+			if (dev->drv->wait_until_sent)
+				dev->drv->wait_until_sent(dev);
+			next_state = SIRDEV_STATE_TX_DONE;
+			break;
+
+		case SIRDEV_STATE_TX_DONE:
+			return 0;
+
+		default:
+			IRDA_ERROR("%s - undefined state\n", __FUNCTION__);
+			return -EINVAL;
+		}
+		fsm->substate = next_state;
+	} while (delay == 0);
+	return delay;
+}
+
+/*
+ * Function sirdev_config_fsm
+ *
+ * State machine to handle the configuration of the device (and attached dongle, if any).
+ * This handler is scheduled for execution in kIrDAd context, so we can sleep.
+ * however, kIrDAd is shared by all sir_dev devices so we better don't sleep there too
+ * long. Instead, for longer delays we start a timer to reschedule us later.
+ * On entry, fsm->sem is always locked and the netdev xmit queue stopped.
+ * Both must be unlocked/restarted on completion - but only on final exit.
+ */
+
+static void sirdev_config_fsm(void *data)
+{
+	struct sir_dev *dev = data;
+	struct sir_fsm *fsm = &dev->fsm;
+	int next_state;
+	int ret = -1;
+	unsigned delay;
+
+	IRDA_DEBUG(2, "%s(), <%ld>\n", __FUNCTION__, jiffies);
+
+	do {
+		IRDA_DEBUG(3, "%s - state=0x%04x / substate=0x%04x\n",
+			__FUNCTION__, fsm->state, fsm->substate);
+
+		next_state = fsm->state;
+		delay = 0;
+
+		switch(fsm->state) {
+
+		case SIRDEV_STATE_DONGLE_OPEN:
+			if (dev->dongle_drv != NULL) {
+				ret = sirdev_put_dongle(dev);
+				if (ret) {
+					fsm->result = -EINVAL;
+					next_state = SIRDEV_STATE_ERROR;
+					break;
+				}
+			}
+
+			/* Initialize dongle */
+			ret = sirdev_get_dongle(dev, fsm->param);
+			if (ret) {
+				fsm->result = ret;
+				next_state = SIRDEV_STATE_ERROR;
+				break;
+			}
+
+			/* Dongles are powered through the modem control lines which
+			 * were just set during open. Before resetting, let's wait for
+			 * the power to stabilize. This is what some dongle drivers did
+			 * in open before, while others didn't - should be safe anyway.
+			 */
+
+			delay = 50;
+			fsm->substate = SIRDEV_STATE_DONGLE_RESET;
+			next_state = SIRDEV_STATE_DONGLE_RESET;
+
+			fsm->param = 9600;
+
+			break;
+
+		case SIRDEV_STATE_DONGLE_CLOSE:
+			/* shouldn't we just treat this as success=? */
+			if (dev->dongle_drv == NULL) {
+				fsm->result = -EINVAL;
+				next_state = SIRDEV_STATE_ERROR;
+				break;
+			}
+
+			ret = sirdev_put_dongle(dev);
+			if (ret) {
+				fsm->result = ret;
+				next_state = SIRDEV_STATE_ERROR;
+				break;
+			}
+			next_state = SIRDEV_STATE_DONE;
+			break;
+
+		case SIRDEV_STATE_SET_DTR_RTS:
+			ret = sirdev_set_dtr_rts(dev,
+				(fsm->param&0x02) ? TRUE : FALSE,
+				(fsm->param&0x01) ? TRUE : FALSE);
+			next_state = SIRDEV_STATE_DONE;
+			break;
+
+		case SIRDEV_STATE_SET_SPEED:
+			fsm->substate = SIRDEV_STATE_WAIT_XMIT;
+			next_state = SIRDEV_STATE_DONGLE_CHECK;
+			break;
+
+		case SIRDEV_STATE_DONGLE_CHECK:
+			ret = sirdev_tx_complete_fsm(dev);
+			if (ret < 0) {
+				fsm->result = ret;
+				next_state = SIRDEV_STATE_ERROR;
+				break;
+			}
+			if ((delay=ret) != 0)
+				break;
+
+			if (dev->dongle_drv) {
+				fsm->substate = SIRDEV_STATE_DONGLE_RESET;
+				next_state = SIRDEV_STATE_DONGLE_RESET;
+			}
+			else {
+				dev->speed = fsm->param;
+				next_state = SIRDEV_STATE_PORT_SPEED;
+			}
+			break;
+
+		case SIRDEV_STATE_DONGLE_RESET:
+			if (dev->dongle_drv->reset) {
+				ret = dev->dongle_drv->reset(dev);
+				if (ret < 0) {
+					fsm->result = ret;
+					next_state = SIRDEV_STATE_ERROR;
+					break;
+				}
+			}
+			else
+				ret = 0;
+			if ((delay=ret) == 0) {
+				/* set serial port according to dongle default speed */
+				if (dev->drv->set_speed)
+					dev->drv->set_speed(dev, dev->speed);
+				fsm->substate = SIRDEV_STATE_DONGLE_SPEED;
+				next_state = SIRDEV_STATE_DONGLE_SPEED;
+			}
+			break;
+
+		case SIRDEV_STATE_DONGLE_SPEED:
+			if (dev->dongle_drv->reset) {
+				ret = dev->dongle_drv->set_speed(dev, fsm->param);
+				if (ret < 0) {
+					fsm->result = ret;
+					next_state = SIRDEV_STATE_ERROR;
+					break;
+				}
+			}
+			else
+				ret = 0;
+			if ((delay=ret) == 0)
+				next_state = SIRDEV_STATE_PORT_SPEED;
+			break;
+
+		case SIRDEV_STATE_PORT_SPEED:
+			/* Finally we are ready to change the serial port speed */
+			if (dev->drv->set_speed)
+				dev->drv->set_speed(dev, dev->speed);
+			dev->new_speed = 0;
+			next_state = SIRDEV_STATE_DONE;
+			break;
+
+		case SIRDEV_STATE_DONE:
+			/* Signal network layer so it can send more frames */
+			netif_wake_queue(dev->netdev);
+			next_state = SIRDEV_STATE_COMPLETE;
+			break;
+
+		default:
+			IRDA_ERROR("%s - undefined state\n", __FUNCTION__);
+			fsm->result = -EINVAL;
+			/* fall thru */
+
+		case SIRDEV_STATE_ERROR:
+			IRDA_ERROR("%s - error: %d\n", __FUNCTION__, fsm->result);
+
+#if 0	/* don't enable this before we have netdev->tx_timeout to recover */
+			netif_stop_queue(dev->netdev);
+#else
+			netif_wake_queue(dev->netdev);
+#endif
+			/* fall thru */
+
+		case SIRDEV_STATE_COMPLETE:
+			/* config change finished, so we are not busy any longer */
+			sirdev_enable_rx(dev);
+			up(&fsm->sem);
+			return;
+		}
+		fsm->state = next_state;
+	} while(!delay);
+
+	queue_delayed_work(irda_sir_wq, &fsm->work, msecs_to_jiffies(delay));
+}
+
+/* schedule some device configuration task for execution by kIrDAd
+ * on behalf of the above state machine.
+ * can be called from process or interrupt/tasklet context.
+ */
+
+int sirdev_schedule_request(struct sir_dev *dev, int initial_state, unsigned param)
+{
+	struct sir_fsm *fsm = &dev->fsm;
+
+	IRDA_DEBUG(2, "%s - state=0x%04x / param=%u\n", __FUNCTION__, initial_state, param);
+
+	if (down_trylock(&fsm->sem)) {
+		if (in_interrupt()  ||  in_atomic()  ||  irqs_disabled()) {
+			IRDA_DEBUG(1, "%s(), state machine busy!\n", __FUNCTION__);
+			return -EWOULDBLOCK;
+		} else
+			down(&fsm->sem);
+	}
+
+	if (fsm->state == SIRDEV_STATE_DEAD) {
+		/* race with sirdev_close should never happen */
+		IRDA_ERROR("%s(), instance staled!\n", __FUNCTION__);
+		up(&fsm->sem);
+		return -ESTALE;		/* or better EPIPE? */
+	}
+
+	netif_stop_queue(dev->netdev);
+	atomic_set(&dev->enable_rx, 0);
+
+	fsm->state = initial_state;
+	fsm->param = param;
+	fsm->result = 0;
+
+	INIT_WORK(&fsm->work, sirdev_config_fsm, dev);
+	queue_work(irda_sir_wq, &fsm->work);
+	return 0;
+}
+
+
 /***************************************************************************/
 
 void sirdev_enable_rx(struct sir_dev *dev)
@@ -619,10 +911,6 @@ struct sir_dev * sirdev_get_instance(const struct sir_driver *drv, const char *n
 	spin_lock_init(&dev->tx_lock);
 	init_MUTEX(&dev->fsm.sem);
 
-	INIT_LIST_HEAD(&dev->fsm.rq.lh_request);
-	dev->fsm.rq.pending = 0;
-	init_timer(&dev->fsm.rq.timer);
-
 	dev->drv = drv;
 	dev->netdev = ndev;
 
@@ -682,3 +970,22 @@ int sirdev_put_instance(struct sir_dev *dev)
 }
 EXPORT_SYMBOL(sirdev_put_instance);
 
+static int __init sir_wq_init(void)
+{
+	irda_sir_wq = create_singlethread_workqueue("irda_sir_wq");
+	if (!irda_sir_wq)
+		return -ENOMEM;
+	return 0;
+}
+
+static void __exit sir_wq_exit(void)
+{
+	destroy_workqueue(irda_sir_wq);
+}
+
+module_init(sir_wq_init);
+module_exit(sir_wq_exit);
+
+MODULE_AUTHOR("Martin Diehl <info@mdiehl.de>");
+MODULE_DESCRIPTION("IrDA SIR core");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/irda/sir_kthread.c b/drivers/net/irda/sir_kthread.c
deleted file mode 100644
index e3904d6bfecd..000000000000
--- a/drivers/net/irda/sir_kthread.c
+++ /dev/null
@@ -1,508 +0,0 @@
-/*********************************************************************
- *
- *	sir_kthread.c:		dedicated thread to process scheduled
- *				sir device setup requests
- *
- *	Copyright (c) 2002 Martin Diehl
- *
- *	This program is free software; you can redistribute it and/or 
- *	modify it under the terms of the GNU General Public License as 
- *	published by the Free Software Foundation; either version 2 of 
- *	the License, or (at your option) any later version.
- *
- ********************************************************************/    
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/version.h>
-#include <linux/init.h>
-#include <linux/smp_lock.h>
-#include <linux/completion.h>
-#include <linux/delay.h>
-
-#include <net/irda/irda.h>
-
-#include "sir-dev.h"
-
-/**************************************************************************
- *
- * kIrDAd kernel thread and config state machine
- *
- */
-
-struct irda_request_queue {
-	struct list_head request_list;
-	spinlock_t lock;
-	task_t *thread;
-	struct completion exit;
-	wait_queue_head_t kick, done;
-	atomic_t num_pending;
-};
-
-static struct irda_request_queue irda_rq_queue;
-
-static int irda_queue_request(struct irda_request *rq)
-{
-	int ret = 0;
-	unsigned long flags;
-
-	if (!test_and_set_bit(0, &rq->pending)) {
-		spin_lock_irqsave(&irda_rq_queue.lock, flags);
-		list_add_tail(&rq->lh_request, &irda_rq_queue.request_list);
-		wake_up(&irda_rq_queue.kick);
-		atomic_inc(&irda_rq_queue.num_pending);
-		spin_unlock_irqrestore(&irda_rq_queue.lock, flags);
-		ret = 1;
-	}
-	return ret;
-}
-
-static void irda_request_timer(unsigned long data)
-{
-	struct irda_request *rq = (struct irda_request *)data;
-	unsigned long flags;
-	
-	spin_lock_irqsave(&irda_rq_queue.lock, flags);
-	list_add_tail(&rq->lh_request, &irda_rq_queue.request_list);
-	wake_up(&irda_rq_queue.kick);
-	spin_unlock_irqrestore(&irda_rq_queue.lock, flags);
-}
-
-static int irda_queue_delayed_request(struct irda_request *rq, unsigned long delay)
-{
-	int ret = 0;
-	struct timer_list *timer = &rq->timer;
-
-	if (!test_and_set_bit(0, &rq->pending)) {
-		timer->expires = jiffies + delay;
-		timer->function = irda_request_timer;
-		timer->data = (unsigned long)rq;
-		atomic_inc(&irda_rq_queue.num_pending);
-		add_timer(timer);
-		ret = 1;
-	}
-	return ret;
-}
-
-static void run_irda_queue(void)
-{
-	unsigned long flags;
-	struct list_head *entry, *tmp;
-	struct irda_request *rq;
-
-	spin_lock_irqsave(&irda_rq_queue.lock, flags);
-	list_for_each_safe(entry, tmp, &irda_rq_queue.request_list) {
-		rq = list_entry(entry, struct irda_request, lh_request);
-		list_del_init(entry);
-		spin_unlock_irqrestore(&irda_rq_queue.lock, flags);
-
-		clear_bit(0, &rq->pending);
-		rq->func(rq->data);
-
-		if (atomic_dec_and_test(&irda_rq_queue.num_pending))
-			wake_up(&irda_rq_queue.done);
-
-		spin_lock_irqsave(&irda_rq_queue.lock, flags);
-	}
-	spin_unlock_irqrestore(&irda_rq_queue.lock, flags);
-}		
-
-static int irda_thread(void *startup)
-{
-	DECLARE_WAITQUEUE(wait, current);
-
-	daemonize("kIrDAd");
-
-	irda_rq_queue.thread = current;
-
-	complete((struct completion *)startup);
-
-	while (irda_rq_queue.thread != NULL) {
-
-		/* We use TASK_INTERRUPTIBLE, rather than
-		 * TASK_UNINTERRUPTIBLE.  Andrew Morton made this
-		 * change ; he told me that it is safe, because "signal
-		 * blocking is now handled in daemonize()", he added
-		 * that the problem is that "uninterruptible sleep
-		 * contributes to load average", making user worry.
-		 * Jean II */
-		set_task_state(current, TASK_INTERRUPTIBLE);
-		add_wait_queue(&irda_rq_queue.kick, &wait);
-		if (list_empty(&irda_rq_queue.request_list))
-			schedule();
-		else
-			__set_task_state(current, TASK_RUNNING);
-		remove_wait_queue(&irda_rq_queue.kick, &wait);
-
-		/* make swsusp happy with our thread */
-		try_to_freeze();
-
-		run_irda_queue();
-	}
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,35)
-	reparent_to_init();
-#endif
-	complete_and_exit(&irda_rq_queue.exit, 0);
-	/* never reached */
-	return 0;
-}
-
-
-static void flush_irda_queue(void)
-{
-	if (atomic_read(&irda_rq_queue.num_pending)) {
-
-		DECLARE_WAITQUEUE(wait, current);
-
-		if (!list_empty(&irda_rq_queue.request_list))
-			run_irda_queue();
-
-		set_task_state(current, TASK_UNINTERRUPTIBLE);
-		add_wait_queue(&irda_rq_queue.done, &wait);
-		if (atomic_read(&irda_rq_queue.num_pending))
-			schedule();
-		else
-			__set_task_state(current, TASK_RUNNING);
-		remove_wait_queue(&irda_rq_queue.done, &wait);
-	}
-}
-
-/* substate handler of the config-fsm to handle the cases where we want
- * to wait for transmit completion before changing the port configuration
- */
-
-static int irda_tx_complete_fsm(struct sir_dev *dev)
-{
-	struct sir_fsm *fsm = &dev->fsm;
-	unsigned next_state, delay;
-	unsigned bytes_left;
-
-	do {
-		next_state = fsm->substate;	/* default: stay in current substate */
-		delay = 0;
-
-		switch(fsm->substate) {
-
-		case SIRDEV_STATE_WAIT_XMIT:
-			if (dev->drv->chars_in_buffer)
-				bytes_left = dev->drv->chars_in_buffer(dev);
-			else
-				bytes_left = 0;
-			if (!bytes_left) {
-				next_state = SIRDEV_STATE_WAIT_UNTIL_SENT;
-				break;
-			}
-
-			if (dev->speed > 115200)
-				delay = (bytes_left*8*10000) / (dev->speed/100);
-			else if (dev->speed > 0)
-				delay = (bytes_left*10*10000) / (dev->speed/100);
-			else
-				delay = 0;
-			/* expected delay (usec) until remaining bytes are sent */
-			if (delay < 100) {
-				udelay(delay);
-				delay = 0;
-				break;
-			}
-			/* sleep some longer delay (msec) */
-			delay = (delay+999) / 1000;
-			break;
-
-		case SIRDEV_STATE_WAIT_UNTIL_SENT:
-			/* block until underlaying hardware buffer are empty */
-			if (dev->drv->wait_until_sent)
-				dev->drv->wait_until_sent(dev);
-			next_state = SIRDEV_STATE_TX_DONE;
-			break;
-
-		case SIRDEV_STATE_TX_DONE:
-			return 0;
-
-		default:
-			IRDA_ERROR("%s - undefined state\n", __FUNCTION__);
-			return -EINVAL;
-		}
-		fsm->substate = next_state;
-	} while (delay == 0);
-	return delay;
-}
-
-/*
- * Function irda_config_fsm
- *
- * State machine to handle the configuration of the device (and attached dongle, if any).
- * This handler is scheduled for execution in kIrDAd context, so we can sleep.
- * however, kIrDAd is shared by all sir_dev devices so we better don't sleep there too
- * long. Instead, for longer delays we start a timer to reschedule us later.
- * On entry, fsm->sem is always locked and the netdev xmit queue stopped.
- * Both must be unlocked/restarted on completion - but only on final exit.
- */
-
-static void irda_config_fsm(void *data)
-{
-	struct sir_dev *dev = data;
-	struct sir_fsm *fsm = &dev->fsm;
-	int next_state;
-	int ret = -1;
-	unsigned delay;
-
-	IRDA_DEBUG(2, "%s(), <%ld>\n", __FUNCTION__, jiffies); 
-
-	do {
-		IRDA_DEBUG(3, "%s - state=0x%04x / substate=0x%04x\n",
-			__FUNCTION__, fsm->state, fsm->substate);
-
-		next_state = fsm->state;
-		delay = 0;
-
-		switch(fsm->state) {
-
-		case SIRDEV_STATE_DONGLE_OPEN:
-			if (dev->dongle_drv != NULL) {
-				ret = sirdev_put_dongle(dev);
-				if (ret) {
-					fsm->result = -EINVAL;
-					next_state = SIRDEV_STATE_ERROR;
-					break;
-				}
-			}
-
-			/* Initialize dongle */
-			ret = sirdev_get_dongle(dev, fsm->param);
-			if (ret) {
-				fsm->result = ret;
-				next_state = SIRDEV_STATE_ERROR;
-				break;
-			}
-
-			/* Dongles are powered through the modem control lines which
-			 * were just set during open. Before resetting, let's wait for
-			 * the power to stabilize. This is what some dongle drivers did
-			 * in open before, while others didn't - should be safe anyway.
-			 */
-
-			delay = 50;
-			fsm->substate = SIRDEV_STATE_DONGLE_RESET;
-			next_state = SIRDEV_STATE_DONGLE_RESET;
-
-			fsm->param = 9600;
-
-			break;
-
-		case SIRDEV_STATE_DONGLE_CLOSE:
-			/* shouldn't we just treat this as success=? */
-			if (dev->dongle_drv == NULL) {
-				fsm->result = -EINVAL;
-				next_state = SIRDEV_STATE_ERROR;
-				break;
-			}
-
-			ret = sirdev_put_dongle(dev);
-			if (ret) {
-				fsm->result = ret;
-				next_state = SIRDEV_STATE_ERROR;
-				break;
-			}
-			next_state = SIRDEV_STATE_DONE;
-			break;
-
-		case SIRDEV_STATE_SET_DTR_RTS:
-			ret = sirdev_set_dtr_rts(dev,
-				(fsm->param&0x02) ? TRUE : FALSE,
-				(fsm->param&0x01) ? TRUE : FALSE);
-			next_state = SIRDEV_STATE_DONE;
-			break;
-
-		case SIRDEV_STATE_SET_SPEED:
-			fsm->substate = SIRDEV_STATE_WAIT_XMIT;
-			next_state = SIRDEV_STATE_DONGLE_CHECK;
-			break;
-
-		case SIRDEV_STATE_DONGLE_CHECK:
-			ret = irda_tx_complete_fsm(dev);
-			if (ret < 0) {
-				fsm->result = ret;
-				next_state = SIRDEV_STATE_ERROR;
-				break;
-			}
-			if ((delay=ret) != 0)
-				break;
-
-			if (dev->dongle_drv) {
-				fsm->substate = SIRDEV_STATE_DONGLE_RESET;
-				next_state = SIRDEV_STATE_DONGLE_RESET;
-			}
-			else {
-				dev->speed = fsm->param;
-				next_state = SIRDEV_STATE_PORT_SPEED;
-			}
-			break;
-
-		case SIRDEV_STATE_DONGLE_RESET:
-			if (dev->dongle_drv->reset) {
-				ret = dev->dongle_drv->reset(dev);	
-				if (ret < 0) {
-					fsm->result = ret;
-					next_state = SIRDEV_STATE_ERROR;
-					break;
-				}
-			}
-			else
-				ret = 0;
-			if ((delay=ret) == 0) {
-				/* set serial port according to dongle default speed */
-				if (dev->drv->set_speed)
-					dev->drv->set_speed(dev, dev->speed);
-				fsm->substate = SIRDEV_STATE_DONGLE_SPEED;
-				next_state = SIRDEV_STATE_DONGLE_SPEED;
-			}
-			break;
-
-		case SIRDEV_STATE_DONGLE_SPEED:				
-			if (dev->dongle_drv->reset) {
-				ret = dev->dongle_drv->set_speed(dev, fsm->param);
-				if (ret < 0) {
-					fsm->result = ret;
-					next_state = SIRDEV_STATE_ERROR;
-					break;
-				}
-			}
-			else
-				ret = 0;
-			if ((delay=ret) == 0)
-				next_state = SIRDEV_STATE_PORT_SPEED;
-			break;
-
-		case SIRDEV_STATE_PORT_SPEED:
-			/* Finally we are ready to change the serial port speed */
-			if (dev->drv->set_speed)
-				dev->drv->set_speed(dev, dev->speed);
-			dev->new_speed = 0;
-			next_state = SIRDEV_STATE_DONE;
-			break;
-
-		case SIRDEV_STATE_DONE:
-			/* Signal network layer so it can send more frames */
-			netif_wake_queue(dev->netdev);
-			next_state = SIRDEV_STATE_COMPLETE;
-			break;
-
-		default:
-			IRDA_ERROR("%s - undefined state\n", __FUNCTION__);
-			fsm->result = -EINVAL;
-			/* fall thru */
-
-		case SIRDEV_STATE_ERROR:
-			IRDA_ERROR("%s - error: %d\n", __FUNCTION__, fsm->result);
-
-#if 0	/* don't enable this before we have netdev->tx_timeout to recover */
-			netif_stop_queue(dev->netdev);
-#else
-			netif_wake_queue(dev->netdev);
-#endif
-			/* fall thru */
-
-		case SIRDEV_STATE_COMPLETE:
-			/* config change finished, so we are not busy any longer */
-			sirdev_enable_rx(dev);
-			up(&fsm->sem);
-			return;
-		}
-		fsm->state = next_state;
-	} while(!delay);
-
-	irda_queue_delayed_request(&fsm->rq, msecs_to_jiffies(delay));
-}
-
-/* schedule some device configuration task for execution by kIrDAd
- * on behalf of the above state machine.
- * can be called from process or interrupt/tasklet context.
- */
-
-int sirdev_schedule_request(struct sir_dev *dev, int initial_state, unsigned param)
-{
-	struct sir_fsm *fsm = &dev->fsm;
-	int xmit_was_down;
-
-	IRDA_DEBUG(2, "%s - state=0x%04x / param=%u\n", __FUNCTION__, initial_state, param);
-
-	if (down_trylock(&fsm->sem)) {
-		if (in_interrupt()  ||  in_atomic()  ||  irqs_disabled()) {
-			IRDA_DEBUG(1, "%s(), state machine busy!\n", __FUNCTION__);
-			return -EWOULDBLOCK;
-		} else
-			down(&fsm->sem);
-	}
-
-	if (fsm->state == SIRDEV_STATE_DEAD) {
-		/* race with sirdev_close should never happen */
-		IRDA_ERROR("%s(), instance staled!\n", __FUNCTION__);
-		up(&fsm->sem);
-		return -ESTALE;		/* or better EPIPE? */
-	}
-
-	xmit_was_down = netif_queue_stopped(dev->netdev);
-	netif_stop_queue(dev->netdev);
-	atomic_set(&dev->enable_rx, 0);
-
-	fsm->state = initial_state;
-	fsm->param = param;
-	fsm->result = 0;
-
-	INIT_LIST_HEAD(&fsm->rq.lh_request);
-	fsm->rq.pending = 0;
-	fsm->rq.func = irda_config_fsm;
-	fsm->rq.data = dev;
-
-	if (!irda_queue_request(&fsm->rq)) {	/* returns 0 on error! */
-		atomic_set(&dev->enable_rx, 1);
-		if (!xmit_was_down)
-			netif_wake_queue(dev->netdev);		
-		up(&fsm->sem);
-		return -EAGAIN;
-	}
-	return 0;
-}
-
-static int __init irda_thread_create(void)
-{
-	struct completion startup;
-	int pid;
-
-	spin_lock_init(&irda_rq_queue.lock);
-	irda_rq_queue.thread = NULL;
-	INIT_LIST_HEAD(&irda_rq_queue.request_list);
-	init_waitqueue_head(&irda_rq_queue.kick);
-	init_waitqueue_head(&irda_rq_queue.done);
-	atomic_set(&irda_rq_queue.num_pending, 0);
-
-	init_completion(&startup);
-	pid = kernel_thread(irda_thread, &startup, CLONE_FS|CLONE_FILES);
-	if (pid <= 0)
-		return -EAGAIN;
-	else
-		wait_for_completion(&startup);
-
-	return 0;
-}
-
-static void __exit irda_thread_join(void)
-{
-	if (irda_rq_queue.thread) {
-		flush_irda_queue();
-		init_completion(&irda_rq_queue.exit);
-		irda_rq_queue.thread = NULL;
-		wake_up(&irda_rq_queue.kick);		
-		wait_for_completion(&irda_rq_queue.exit);
-	}
-}
-
-module_init(irda_thread_create);
-module_exit(irda_thread_join);
-
-MODULE_AUTHOR("Martin Diehl <info@mdiehl.de>");
-MODULE_DESCRIPTION("IrDA SIR core");
-MODULE_LICENSE("GPL");
-
diff --git a/drivers/net/irda/smsc-ircc2.c b/drivers/net/irda/smsc-ircc2.c
index bbcfc8ec35a1..a4674044bd6f 100644
--- a/drivers/net/irda/smsc-ircc2.c
+++ b/drivers/net/irda/smsc-ircc2.c
@@ -54,6 +54,7 @@
 #include <linux/rtnetlink.h>
 #include <linux/serial_reg.h>
 #include <linux/dma-mapping.h>
+#include <linux/pnp.h>
 #include <linux/platform_device.h>
 
 #include <asm/io.h>
@@ -225,6 +226,8 @@ static int __init smsc_superio_lpc(unsigned short cfg_base);
 #ifdef CONFIG_PCI
 static int __init preconfigure_smsc_chip(struct smsc_ircc_subsystem_configuration *conf);
 static int __init preconfigure_through_82801(struct pci_dev *dev, struct smsc_ircc_subsystem_configuration *conf);
+static void __init preconfigure_ali_port(struct pci_dev *dev,
+					 unsigned short port);
 static int __init preconfigure_through_ali(struct pci_dev *dev, struct smsc_ircc_subsystem_configuration *conf);
 static int __init smsc_ircc_preconfigure_subsystems(unsigned short ircc_cfg,
 						    unsigned short ircc_fir,
@@ -356,6 +359,16 @@ static inline void register_bank(int iobase, int bank)
                iobase + IRCC_MASTER);
 }
 
+#ifdef	CONFIG_PNP
+/* PNP hotplug support */
+static const struct pnp_device_id smsc_ircc_pnp_table[] = {
+	{ .id = "SMCf010", .driver_data = 0 },
+	/* and presumably others */
+	{ }
+};
+MODULE_DEVICE_TABLE(pnp, smsc_ircc_pnp_table);
+#endif
+
 
 /*******************************************************************************
  *
@@ -2070,7 +2083,8 @@ static void smsc_ircc_sir_wait_hw_transmitter_finish(struct smsc_ircc_cb *self)
 
 /* PROBING
  *
- *
+ * REVISIT we can be told about the device by PNP, and should use that info
+ * instead of probing hardware and creating a platform_device ...
  */
 
 static int __init smsc_ircc_look_for_chips(void)
@@ -2327,9 +2341,14 @@ static int __init smsc_superio_lpc(unsigned short cfg_base)
  * pre-configuration not properly done by the BIOS (especially laptops)
  * This code is based in part on smcinit.c, tosh1800-smcinit.c
  * and tosh2450-smcinit.c. The table lists the device entries
- * for ISA bridges with an LPC (Local Peripheral Configurator)
- * that are in turn used to configure the SMSC device with default
- * SIR and FIR I/O ports, DMA and IRQ.
+ * for ISA bridges with an LPC (Low Pin Count) controller which
+ * handles the communication with the SMSC device. After the LPC
+ * controller is initialized through PCI, the SMSC device is initialized
+ * through a dedicated port in the ISA port-mapped I/O area, this latter
+ * area is used to configure the SMSC device with default
+ * SIR and FIR I/O ports, DMA and IRQ. Different vendors have
+ * used different sets of parameters and different control port
+ * addresses making a subsystem device table necessary.
  */
 #ifdef CONFIG_PCI
 #define PCIID_VENDOR_INTEL 0x8086
@@ -2340,9 +2359,10 @@ static struct smsc_ircc_subsystem_configuration subsystem_configurations[] __dev
 		.device = 0x24cc,
 		.subvendor = 0x103c,
 		.subdevice = 0x088c,
-		.sir_io = 0x02f8, /* Quite certain these are the same for nc8000 as for nc6000 */
+		/* Quite certain these are the same for nc8000 as for nc6000 */
+		.sir_io = 0x02f8,
 		.fir_io = 0x0130,
-		.fir_irq = 0x09,
+		.fir_irq = 0x05,
 		.fir_dma = 0x03,
 		.cfg_base = 0x004e,
 		.preconfigure = preconfigure_through_82801,
@@ -2355,60 +2375,79 @@ static struct smsc_ircc_subsystem_configuration subsystem_configurations[] __dev
 		.subdevice = 0x0890,
 		.sir_io = 0x02f8,
 		.fir_io = 0x0130,
-		.fir_irq = 0x09,
+		.fir_irq = 0x05,
 		.fir_dma = 0x03,
 		.cfg_base = 0x004e,
 		.preconfigure = preconfigure_through_82801,
 		.name = "HP nc6000",
 	},
 	{
-		.vendor = PCIID_VENDOR_INTEL, /* Intel 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge */
+		/* Intel 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge */
+		.vendor = PCIID_VENDOR_INTEL,
 		.device = 0x24c0,
 		.subvendor = 0x1179,
-		.subdevice = 0xffff, /* 0xffff is "any", Not sure, 0x0001 or 0x0002 */
+		.subdevice = 0xffff, /* 0xffff is "any" */
 		.sir_io = 0x03f8,
 		.fir_io = 0x0130,
 		.fir_irq = 0x07,
 		.fir_dma = 0x01,
 		.cfg_base = 0x002e,
 		.preconfigure = preconfigure_through_82801,
-		.name = "Toshiba Satellite 2450",
+		.name = "Toshiba laptop with Intel 82801DB/DBL LPC bridge",
 	},
 	{
 		.vendor = PCIID_VENDOR_INTEL, /* Intel 82801CAM ISA bridge */
-		.device = 0x248c, /* Some use 24cc? */
+		.device = 0x248c,
+		.subvendor = 0x1179,
+		.subdevice = 0xffff, /* 0xffff is "any" */
+		.sir_io = 0x03f8,
+		.fir_io = 0x0130,
+		.fir_irq = 0x03,
+		.fir_dma = 0x03,
+		.cfg_base = 0x002e,
+		.preconfigure = preconfigure_through_82801,
+		.name = "Toshiba laptop with Intel 82801CAM ISA bridge",
+	},
+	{
+		/* 82801DBM (ICH4-M) LPC Interface Bridge */
+		.vendor = PCIID_VENDOR_INTEL,
+		.device = 0x24cc,
 		.subvendor = 0x1179,
-		.subdevice = 0xffff, /* 0xffff is "any", Not sure, 0x0001 or 0x0002 */
+		.subdevice = 0xffff, /* 0xffff is "any" */
 		.sir_io = 0x03f8,
 		.fir_io = 0x0130,
 		.fir_irq = 0x03,
 		.fir_dma = 0x03,
 		.cfg_base = 0x002e,
 		.preconfigure = preconfigure_through_82801,
-		.name = "Toshiba Satellite 5100/5200, Tecra 9100",
+		.name = "Toshiba laptop with Intel 8281DBM LPC bridge",
 	},
 	{
-		.vendor = PCIID_VENDOR_ALI, /* ALi M1533/M1535 PCI to ISA Bridge [Aladdin IV/V/V+] */
+		/* ALi M1533/M1535 PCI to ISA Bridge [Aladdin IV/V/V+] */
+		.vendor = PCIID_VENDOR_ALI,
 		.device = 0x1533,
 		.subvendor = 0x1179,
-		.subdevice = 0xffff, /* 0xffff is "any", Not sure, 0x0001 or 0x0002 */
+		.subdevice = 0xffff, /* 0xffff is "any" */
 		.sir_io = 0x02e8,
 		.fir_io = 0x02f8,
 		.fir_irq = 0x07,
 		.fir_dma = 0x03,
 		.cfg_base = 0x002e,
 		.preconfigure = preconfigure_through_ali,
-		.name = "Toshiba Satellite 1800",
+		.name = "Toshiba laptop with ALi ISA bridge",
 	},
 	{ } // Terminator
 };
 
 
 /*
- * This sets up the basic SMSC parameters (FIR port, SIR port, FIR DMA, FIR IRQ)
+ * This sets up the basic SMSC parameters
+ * (FIR port, SIR port, FIR DMA, FIR IRQ)
  * through the chip configuration port.
  */
-static int __init preconfigure_smsc_chip(struct smsc_ircc_subsystem_configuration *conf)
+static int __init preconfigure_smsc_chip(struct
+					 smsc_ircc_subsystem_configuration
+					 *conf)
 {
 	unsigned short iobase = conf->cfg_base;
 	unsigned char tmpbyte;
@@ -2416,7 +2455,9 @@ static int __init preconfigure_smsc_chip(struct smsc_ircc_subsystem_configuratio
 	outb(LPC47N227_CFGACCESSKEY, iobase); // enter configuration state
 	outb(SMSCSIOFLAT_DEVICEID_REG, iobase); // set for device ID
 	tmpbyte = inb(iobase +1); // Read device ID
-	IRDA_DEBUG(0, "Detected Chip id: 0x%02x, setting up registers...\n",tmpbyte);
+	IRDA_DEBUG(0,
+		   "Detected Chip id: 0x%02x, setting up registers...\n",
+		   tmpbyte);
 
 	/* Disable UART1 and set up SIR I/O port */
 	outb(0x24, iobase);  // select CR24 - UART1 base addr
@@ -2426,6 +2467,7 @@ static int __init preconfigure_smsc_chip(struct smsc_ircc_subsystem_configuratio
 	tmpbyte = inb(iobase + 1);
 	if (tmpbyte != (conf->sir_io >> 2) ) {
 		IRDA_WARNING("ERROR: could not configure SIR ioport.\n");
+		IRDA_WARNING("Try to supply ircc_cfg argument.\n");
 		return -ENXIO;
 	}
 
@@ -2461,7 +2503,8 @@ static int __init preconfigure_smsc_chip(struct smsc_ircc_subsystem_configuratio
 
 	outb(SMSCSIOFLAT_UARTMODE0C_REG, iobase);  // CR0C - UART mode
 	tmpbyte = inb(iobase + 1);
-	tmpbyte &= ~SMSCSIOFLAT_UART2MODE_MASK | SMSCSIOFLAT_UART2MODE_VAL_IRDA;
+	tmpbyte &= ~SMSCSIOFLAT_UART2MODE_MASK |
+		SMSCSIOFLAT_UART2MODE_VAL_IRDA;
 	outb(tmpbyte, iobase + 1); // enable IrDA (HPSIR) mode, high speed
 
 	outb(LPC47N227_APMBOOTDRIVE_REG, iobase);  // CR07 - Auto Pwr Mgt/boot drive sel
@@ -2486,53 +2529,226 @@ static int __init preconfigure_smsc_chip(struct smsc_ircc_subsystem_configuratio
 	return 0;
 }
 
-/* 82801CAM registers */
+/* 82801CAM generic registers */
 #define VID 0x00
 #define DID 0x02
-#define PIRQA_ROUT 0x60
+#define PIRQ_A_D_ROUT 0x60
+#define SIRQ_CNTL 0x64
+#define PIRQ_E_H_ROUT 0x68
 #define PCI_DMA_C 0x90
+/* LPC-specific registers */
 #define COM_DEC 0xe0
+#define GEN1_DEC 0xe4
 #define LPC_EN 0xe6
 #define GEN2_DEC 0xec
 /*
- * Sets up the I/O range using the 82801CAM ISA bridge, 82801DBM LPC bridge or
- * Intel 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge. They all work the same way!
+ * Sets up the I/O range using the 82801CAM ISA bridge, 82801DBM LPC bridge
+ * or Intel 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge.
+ * They all work the same way!
  */
 static int __init preconfigure_through_82801(struct pci_dev *dev,
-				  struct smsc_ircc_subsystem_configuration *conf)
+					     struct
+					     smsc_ircc_subsystem_configuration
+					     *conf)
 {
 	unsigned short tmpword;
-	int ret;
+	unsigned char tmpbyte;
 
-	IRDA_MESSAGE("Setting up the SMSC device via the 82801 controller.\n");
-	pci_write_config_byte(dev, COM_DEC, 0x10);
+	IRDA_MESSAGE("Setting up Intel 82801 controller and SMSC device\n");
+	/*
+	 * Select the range for the COMA COM port (SIR)
+	 * Register COM_DEC:
+	 * Bit 7: reserved
+	 * Bit 6-4, COMB decode range
+	 * Bit 3: reserved
+	 * Bit 2-0, COMA decode range
+	 *
+	 * Decode ranges:
+	 *   000 = 0x3f8-0x3ff (COM1)
+	 *   001 = 0x2f8-0x2ff (COM2)
+	 *   010 = 0x220-0x227
+	 *   011 = 0x228-0x22f
+	 *   100 = 0x238-0x23f
+	 *   101 = 0x2e8-0x2ef (COM4)
+	 *   110 = 0x338-0x33f
+	 *   111 = 0x3e8-0x3ef (COM3)
+	 */
+	pci_read_config_byte(dev, COM_DEC, &tmpbyte);
+	tmpbyte &= 0xf8; /* mask COMA bits */
+	switch(conf->sir_io) {
+	case 0x3f8:
+		tmpbyte |= 0x00;
+		break;
+	case 0x2f8:
+		tmpbyte |= 0x01;
+		break;
+	case 0x220:
+		tmpbyte |= 0x02;
+		break;
+	case 0x228:
+		tmpbyte |= 0x03;
+		break;
+	case 0x238:
+		tmpbyte |= 0x04;
+		break;
+	case 0x2e8:
+		tmpbyte |= 0x05;
+		break;
+	case 0x338:
+		tmpbyte |= 0x06;
+		break;
+	case 0x3e8:
+		tmpbyte |= 0x07;
+		break;
+	default:
+		tmpbyte |= 0x01; /* COM2 default */
+	}
+	IRDA_DEBUG(1, "COM_DEC (write): 0x%02x\n", tmpbyte);
+	pci_write_config_byte(dev, COM_DEC, tmpbyte);
 
-	/* Enable LPC */
-	pci_read_config_word(dev, LPC_EN, &tmpword); /* LPC_EN register */
-	tmpword &= 0xfffd; /* mask bit 1 */
-	tmpword |= 0x0001; /* set bit 0 : COMA addr range enable */
+	/* Enable Low Pin Count interface */
+	pci_read_config_word(dev, LPC_EN, &tmpword);
+	/* These seem to be set up at all times,
+	 * just make sure it is properly set.
+	 */
+	switch(conf->cfg_base) {
+	case 0x04e:
+		tmpword |= 0x2000;
+		break;
+	case 0x02e:
+		tmpword |= 0x1000;
+		break;
+	case 0x062:
+		tmpword |= 0x0800;
+		break;
+	case 0x060:
+		tmpword |= 0x0400;
+		break;
+	default:
+		IRDA_WARNING("Uncommon I/O base address: 0x%04x\n",
+			     conf->cfg_base);
+		break;
+	}
+	tmpword &= 0xfffd; /* disable LPC COMB */
+	tmpword |= 0x0001; /* set bit 0 : enable LPC COMA addr range (GEN2) */
+	IRDA_DEBUG(1, "LPC_EN (write): 0x%04x\n", tmpword);
 	pci_write_config_word(dev, LPC_EN, tmpword);
 
-	/* Setup DMA */
-	pci_write_config_word(dev, PCI_DMA_C, 0xc0c0); /* LPC I/F DMA on, channel 3  -- rtm (?? PCI DMA ?) */
-	pci_write_config_word(dev, GEN2_DEC, 0x131); /* LPC I/F 2nd decode range */
+	/*
+	 * Configure LPC DMA channel
+	 * PCI_DMA_C bits:
+	 * Bit 15-14: DMA channel 7 select
+	 * Bit 13-12: DMA channel 6 select
+	 * Bit 11-10: DMA channel 5 select
+	 * Bit 9-8:   Reserved
+	 * Bit 7-6:   DMA channel 3 select
+	 * Bit 5-4:   DMA channel 2 select
+	 * Bit 3-2:   DMA channel 1 select
+	 * Bit 1-0:   DMA channel 0 select
+	 *  00 = Reserved value
+	 *  01 = PC/PCI DMA
+	 *  10 = Reserved value
+	 *  11 = LPC I/F DMA
+	 */
+	pci_read_config_word(dev, PCI_DMA_C, &tmpword);
+	switch(conf->fir_dma) {
+	case 0x07:
+		tmpword |= 0xc000;
+		break;
+	case 0x06:
+		tmpword |= 0x3000;
+		break;
+	case 0x05:
+		tmpword |= 0x0c00;
+		break;
+	case 0x03:
+		tmpword |= 0x00c0;
+		break;
+	case 0x02:
+		tmpword |= 0x0030;
+		break;
+	case 0x01:
+		tmpword |= 0x000c;
+		break;
+	case 0x00:
+		tmpword |= 0x0003;
+		break;
+	default:
+		break; /* do not change settings */
+	}
+	IRDA_DEBUG(1, "PCI_DMA_C (write): 0x%04x\n", tmpword);
+	pci_write_config_word(dev, PCI_DMA_C, tmpword);
+
+	/*
+	 * GEN2_DEC bits:
+	 * Bit 15-4: Generic I/O range
+	 * Bit 3-1: reserved (read as 0)
+	 * Bit 0: enable GEN2 range on LPC I/F
+	 */
+	tmpword = conf->fir_io & 0xfff8;
+	tmpword |= 0x0001;
+	IRDA_DEBUG(1, "GEN2_DEC (write): 0x%04x\n", tmpword);
+	pci_write_config_word(dev, GEN2_DEC, tmpword);
 
 	/* Pre-configure chip */
-	ret = preconfigure_smsc_chip(conf);
+	return preconfigure_smsc_chip(conf);
+}
 
-	/* Disable LPC */
-	pci_read_config_word(dev, LPC_EN, &tmpword); /* LPC_EN register */
-	tmpword &= 0xfffc; /* mask bit 1 and bit 0, COMA addr range disable */
-	pci_write_config_word(dev, LPC_EN, tmpword);
-	return ret;
+/*
+ * Pre-configure a certain port on the ALi 1533 bridge.
+ * This is based on reverse-engineering since ALi does not
+ * provide any data sheet for the 1533 chip.
+ */
+static void __init preconfigure_ali_port(struct pci_dev *dev,
+					 unsigned short port)
+{
+	unsigned char reg;
+	/* These bits obviously control the different ports */
+	unsigned char mask;
+	unsigned char tmpbyte;
+
+	switch(port) {
+	case 0x0130:
+	case 0x0178:
+		reg = 0xb0;
+		mask = 0x80;
+		break;
+	case 0x03f8:
+		reg = 0xb4;
+		mask = 0x80;
+		break;
+	case 0x02f8:
+		reg = 0xb4;
+		mask = 0x30;
+		break;
+	case 0x02e8:
+		reg = 0xb4;
+		mask = 0x08;
+		break;
+	default:
+		IRDA_ERROR("Failed to configure unsupported port on ALi 1533 bridge: 0x%04x\n", port);
+		return;
+	}
+
+	pci_read_config_byte(dev, reg, &tmpbyte);
+	/* Turn on the right bits */
+	tmpbyte |= mask;
+	pci_write_config_byte(dev, reg, tmpbyte);
+	IRDA_MESSAGE("Activated ALi 1533 ISA bridge port 0x%04x.\n", port);
+	return;
 }
 
 static int __init preconfigure_through_ali(struct pci_dev *dev,
-				  struct smsc_ircc_subsystem_configuration *conf)
+					   struct
+					   smsc_ircc_subsystem_configuration
+					   *conf)
 {
-	/* TODO: put in ALi 1533 configuration here. */
-	IRDA_MESSAGE("SORRY: %s has an unsupported bridge controller (ALi): not pre-configured.\n", conf->name);
-	return -ENODEV;
+	/* Configure the two ports on the ALi 1533 */
+	preconfigure_ali_port(dev, conf->sir_io);
+	preconfigure_ali_port(dev, conf->fir_io);
+
+	/* Pre-configure chip */
+	return preconfigure_smsc_chip(conf);
 }
 
 static int __init smsc_ircc_preconfigure_subsystems(unsigned short ircc_cfg,
@@ -2552,9 +2768,10 @@ static int __init smsc_ircc_preconfigure_subsystems(unsigned short ircc_cfg,
 		struct smsc_ircc_subsystem_configuration *conf;
 
 		/*
-		 * Cache the subsystem vendor/device: some manufacturers fail to set
-		 * this for all components, so we save it in case there is just
-		 * 0x0000 0x0000 on the device we want to check.
+		 * Cache the subsystem vendor/device:
+		 * some manufacturers fail to set this for all components,
+		 * so we save it in case there is just 0x0000 0x0000 on the
+		 * device we want to check.
 		 */
 		if (dev->subsystem_vendor != 0x0000U) {
 			ss_vendor = dev->subsystem_vendor;
@@ -2564,13 +2781,20 @@ static int __init smsc_ircc_preconfigure_subsystems(unsigned short ircc_cfg,
 		for( ; conf->subvendor; conf++) {
 			if(conf->vendor == dev->vendor &&
 			   conf->device == dev->device &&
-			   conf->subvendor == ss_vendor && /* Sometimes these are cached values */
-			   (conf->subdevice == ss_device || conf->subdevice == 0xffff)) {
-				struct smsc_ircc_subsystem_configuration tmpconf;
+			   conf->subvendor == ss_vendor &&
+			   /* Sometimes these are cached values */
+			   (conf->subdevice == ss_device ||
+			    conf->subdevice == 0xffff)) {
+				struct smsc_ircc_subsystem_configuration
+					tmpconf;
 
-				memcpy(&tmpconf, conf, sizeof(struct smsc_ircc_subsystem_configuration));
+				memcpy(&tmpconf, conf,
+				       sizeof(struct smsc_ircc_subsystem_configuration));
 
-				/* Override the default values with anything passed in as parameter */
+				/*
+				 * Override the default values with anything
+				 * passed in as parameter
+				 */
 				if (ircc_cfg != 0)
 					tmpconf.cfg_base = ircc_cfg;
 				if (ircc_fir != 0)
diff --git a/drivers/net/ixp2000/enp2611.c b/drivers/net/ixp2000/enp2611.c
index 6f7dce8eba51..b67f586d7392 100644
--- a/drivers/net/ixp2000/enp2611.c
+++ b/drivers/net/ixp2000/enp2611.c
@@ -149,6 +149,8 @@ static void enp2611_check_link_status(unsigned long __dummy)
 		int status;
 
 		dev = nds[i];
+		if (dev == NULL)
+			continue;
 
 		status = pm3386_is_link_up(i);
 		if (status && !netif_carrier_ok(dev)) {
@@ -191,6 +193,7 @@ static void enp2611_set_port_admin_status(int port, int up)
 
 static int __init enp2611_init_module(void)
 { 
+	int ports;
 	int i;
 
 	if (!machine_is_enp2611())
@@ -199,7 +202,8 @@ static int __init enp2611_init_module(void)
 	caleb_reset();
 	pm3386_reset();
 
-	for (i = 0; i < 3; i++) {
+	ports = pm3386_port_count();
+	for (i = 0; i < ports; i++) {
 		nds[i] = ixpdev_alloc(i, sizeof(struct enp2611_ixpdev_priv));
 		if (nds[i] == NULL) {
 			while (--i >= 0)
@@ -215,9 +219,10 @@ static int __init enp2611_init_module(void)
 
 	ixp2400_msf_init(&enp2611_msf_parameters);
 
-	if (ixpdev_init(3, nds, enp2611_set_port_admin_status)) {
-		for (i = 0; i < 3; i++)
-			free_netdev(nds[i]);
+	if (ixpdev_init(ports, nds, enp2611_set_port_admin_status)) {
+		for (i = 0; i < ports; i++)
+			if (nds[i])
+				free_netdev(nds[i]);
 		return -EINVAL;
 	}
 
diff --git a/drivers/net/ixp2000/pm3386.c b/drivers/net/ixp2000/pm3386.c
index 5c7ab7564053..5224651c9aac 100644
--- a/drivers/net/ixp2000/pm3386.c
+++ b/drivers/net/ixp2000/pm3386.c
@@ -86,40 +86,53 @@ static void pm3386_port_reg_write(int port, int _reg, int spacing, u16 value)
 	pm3386_reg_write(port >> 1, reg, value);
 }
 
+int pm3386_secondary_present(void)
+{
+	return pm3386_reg_read(1, 0) == 0x3386;
+}
 
 void pm3386_reset(void)
 {
 	u8 mac[3][6];
+	int secondary;
+
+	secondary = pm3386_secondary_present();
 
 	/* Save programmed MAC addresses.  */
 	pm3386_get_mac(0, mac[0]);
 	pm3386_get_mac(1, mac[1]);
-	pm3386_get_mac(2, mac[2]);
+	if (secondary)
+		pm3386_get_mac(2, mac[2]);
 
 	/* Assert analog and digital reset.  */
 	pm3386_reg_write(0, 0x002, 0x0060);
-	pm3386_reg_write(1, 0x002, 0x0060);
+	if (secondary)
+		pm3386_reg_write(1, 0x002, 0x0060);
 	mdelay(1);
 
 	/* Deassert analog reset.  */
 	pm3386_reg_write(0, 0x002, 0x0062);
-	pm3386_reg_write(1, 0x002, 0x0062);
+	if (secondary)
+		pm3386_reg_write(1, 0x002, 0x0062);
 	mdelay(10);
 
 	/* Deassert digital reset.  */
 	pm3386_reg_write(0, 0x002, 0x0063);
-	pm3386_reg_write(1, 0x002, 0x0063);
+	if (secondary)
+		pm3386_reg_write(1, 0x002, 0x0063);
 	mdelay(10);
 
 	/* Restore programmed MAC addresses.  */
 	pm3386_set_mac(0, mac[0]);
 	pm3386_set_mac(1, mac[1]);
-	pm3386_set_mac(2, mac[2]);
+	if (secondary)
+		pm3386_set_mac(2, mac[2]);
 
 	/* Disable carrier on all ports.  */
 	pm3386_set_carrier(0, 0);
 	pm3386_set_carrier(1, 0);
-	pm3386_set_carrier(2, 0);
+	if (secondary)
+		pm3386_set_carrier(2, 0);
 }
 
 static u16 swaph(u16 x)
@@ -127,6 +140,11 @@ static u16 swaph(u16 x)
 	return ((x << 8) | (x >> 8)) & 0xffff;
 }
 
+int pm3386_port_count(void)
+{
+	return 2 + pm3386_secondary_present();
+}
+
 void pm3386_init_port(int port)
 {
 	int pm = port >> 1;
diff --git a/drivers/net/ixp2000/pm3386.h b/drivers/net/ixp2000/pm3386.h
index fe92bb056ac4..cc4183dca911 100644
--- a/drivers/net/ixp2000/pm3386.h
+++ b/drivers/net/ixp2000/pm3386.h
@@ -13,6 +13,7 @@
 #define __PM3386_H
 
 void pm3386_reset(void);
+int pm3386_port_count(void);
 void pm3386_init_port(int port);
 void pm3386_get_mac(int port, u8 *mac);
 void pm3386_set_mac(int port, u8 *mac);
diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c
index ea62a3e7d586..411f4d809c47 100644
--- a/drivers/net/mv643xx_eth.c
+++ b/drivers/net/mv643xx_eth.c
@@ -1419,6 +1419,8 @@ static int mv643xx_eth_probe(struct platform_device *pdev)
 	mv643xx_eth_update_pscr(dev, &cmd);
 	mv643xx_set_settings(dev, &cmd);
 
+	SET_MODULE_OWNER(dev);
+	SET_NETDEV_DEV(dev, &pdev->dev);
 	err = register_netdev(dev);
 	if (err)
 		goto out;
diff --git a/drivers/net/ne.c b/drivers/net/ne.c
index 08b218c5bfbc..b32765215f75 100644
--- a/drivers/net/ne.c
+++ b/drivers/net/ne.c
@@ -139,8 +139,9 @@ bad_clone_list[] __initdata = {
 
 #if defined(CONFIG_PLAT_MAPPI)
 #  define DCR_VAL 0x4b
-#elif defined(CONFIG_PLAT_OAKS32R)
-#  define DCR_VAL 0x48
+#elif defined(CONFIG_PLAT_OAKS32R)  || \
+   defined(CONFIG_TOSHIBA_RBTX4927) || defined(CONFIG_TOSHIBA_RBTX4938)
+#  define DCR_VAL 0x48		/* 8-bit mode */
 #else
 #  define DCR_VAL 0x49
 #endif
@@ -226,7 +227,7 @@ struct net_device * __init ne_probe(int unit)
 	netdev_boot_setup_check(dev);
 
 #ifdef CONFIG_TOSHIBA_RBTX4938
-	dev->base_addr = 0x07f20280;
+	dev->base_addr = RBTX4938_RTL_8019_BASE;
 	dev->irq = RBTX4938_RTL_8019_IRQ;
 #endif
 	err = do_ne_probe(dev);
@@ -396,10 +397,22 @@ static int __init ne_probe1(struct net_device *dev, int ioaddr)
 		/* We must set the 8390 for word mode. */
 		outb_p(DCR_VAL, ioaddr + EN0_DCFG);
 		start_page = NESM_START_PG;
-		stop_page = NESM_STOP_PG;
+
+		/*
+		 * Realtek RTL8019AS datasheet says that the PSTOP register
+		 * shouldn't exceed 0x60 in 8-bit mode.
+		 * This chip can be identified by reading the signature from
+		 * the  remote byte count registers (otherwise write-only)...
+		 */
+		if ((DCR_VAL & 0x01) == 0 &&		/* 8-bit mode */
+		    inb(ioaddr + EN0_RCNTLO) == 0x50 &&
+		    inb(ioaddr + EN0_RCNTHI) == 0x70)
+			stop_page = 0x60;
+		else
+			stop_page = NESM_STOP_PG;
 	} else {
 		start_page = NE1SM_START_PG;
-		stop_page = NE1SM_STOP_PG;
+		stop_page  = NE1SM_STOP_PG;
 	}
 
 #if  defined(CONFIG_PLAT_MAPPI) || defined(CONFIG_PLAT_OAKS32R)
@@ -509,15 +522,9 @@ static int __init ne_probe1(struct net_device *dev, int ioaddr)
 	ei_status.name = name;
 	ei_status.tx_start_page = start_page;
 	ei_status.stop_page = stop_page;
-#if defined(CONFIG_TOSHIBA_RBTX4927) || defined(CONFIG_TOSHIBA_RBTX4938)
-	wordlength = 1;
-#endif
 
-#ifdef CONFIG_PLAT_OAKS32R
-	ei_status.word16 = 0;
-#else
-	ei_status.word16 = (wordlength == 2);
-#endif
+	/* Use 16-bit mode only if this wasn't overridden by DCR_VAL */
+	ei_status.word16 = (wordlength == 2 && (DCR_VAL & 0x01));
 
 	ei_status.rx_start_page = start_page + TX_PAGES;
 #ifdef PACKETBUF_MEMSIZE
diff --git a/drivers/net/netconsole.c b/drivers/net/netconsole.c
index 66e74f740261..bf58db29e2ed 100644
--- a/drivers/net/netconsole.c
+++ b/drivers/net/netconsole.c
@@ -107,7 +107,7 @@ static int init_netconsole(void)
 
 	if(!configured) {
 		printk("netconsole: not configured, aborting\n");
-		return -EINVAL;
+		return 0;
 	}
 
 	if(netpoll_setup(&np))
diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c
index 448a09488529..2ea66aca648b 100644
--- a/drivers/net/pcmcia/axnet_cs.c
+++ b/drivers/net/pcmcia/axnet_cs.c
@@ -1691,17 +1691,6 @@ static void do_set_multicast_list(struct net_device *dev)
 		memset(ei_local->mcfilter, 0xFF, 8);
 	}
 
-	/* 
-	 * DP8390 manuals don't specify any magic sequence for altering
-	 * the multicast regs on an already running card. To be safe, we
-	 * ensure multicast mode is off prior to loading up the new hash
-	 * table. If this proves to be not enough, we can always resort
-	 * to stopping the NIC, loading the table and then restarting.
-	 */
-	 
-	if (netif_running(dev))
-		outb_p(E8390_RXCONFIG, e8390_base + EN0_RXCR);
-
 	outb_p(E8390_NODMA + E8390_PAGE1, e8390_base + E8390_CMD);
 	for(i = 0; i < 8; i++) 
 	{
@@ -1715,6 +1704,8 @@ static void do_set_multicast_list(struct net_device *dev)
   		outb_p(E8390_RXCONFIG | 0x48, e8390_base + EN0_RXCR);
   	else
   		outb_p(E8390_RXCONFIG | 0x40, e8390_base + EN0_RXCR);
+
+	outb_p(E8390_NODMA+E8390_PAGE0+E8390_START, e8390_base+E8390_CMD);
 }
 
 /*
diff --git a/drivers/net/pcmcia/nmclan_cs.c b/drivers/net/pcmcia/nmclan_cs.c
index 4260c2128f47..a8f6bfc96fd2 100644
--- a/drivers/net/pcmcia/nmclan_cs.c
+++ b/drivers/net/pcmcia/nmclan_cs.c
@@ -1204,7 +1204,7 @@ static int mace_rx(struct net_device *dev, unsigned char RxCnt)
 
 	dev->last_rx = jiffies;
 	lp->linux_stats.rx_packets++;
-	lp->linux_stats.rx_bytes += skb->len;
+	lp->linux_stats.rx_bytes += pkt_len;
 	outb(0xFF, ioaddr + AM2150_RCV_NEXT); /* skip to next frame */
 	continue;
       } else {
diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c
index 506e777c5f06..d090df413049 100644
--- a/drivers/net/pcmcia/pcnet_cs.c
+++ b/drivers/net/pcmcia/pcnet_cs.c
@@ -1639,6 +1639,7 @@ static struct pcmcia_device_id pcnet_ids[] = {
 	PCMCIA_DEVICE_PROD_ID12("CONTEC", "C-NET(PC)C-10L", 0x21cab552, 0xf6f90722),
 	PCMCIA_DEVICE_PROD_ID12("corega", "FEther PCC-TXF", 0x0a21501a, 0xa51564a2),
 	PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega EtherII PCC-T", 0x5261440f, 0xfa9d85bd),
+	PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega EtherII PCC-TD", 0x5261440f, 0xc49bd73d),
 	PCMCIA_DEVICE_PROD_ID12("Corega K.K.", "corega EtherII PCC-TD", 0xd4fdcbd8, 0xc49bd73d),
 	PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega Ether PCC-T", 0x5261440f, 0x6705fcaa),
 	PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega FastEther PCC-TX", 0x5261440f, 0x485e85d9),
diff --git a/drivers/net/pcnet32.c b/drivers/net/pcnet32.c
index 07c31f19c6ba..fc08c4af506c 100644
--- a/drivers/net/pcnet32.c
+++ b/drivers/net/pcnet32.c
@@ -1774,8 +1774,6 @@ static int pcnet32_open(struct net_device *dev)
 		lp->rx_dma_addr[i] = 0;
 	}
 
-	pcnet32_free_ring(dev);
-
 	/*
 	 * Switch back to 16bit mode to avoid problems with dumb
 	 * DOS packet driver after a warm reboot
diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
index 459443b572ce..1b236bdf6b92 100644
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -60,8 +60,10 @@ int mdiobus_register(struct mii_bus *bus)
 	for (i = 0; i < PHY_MAX_ADDR; i++) {
 		struct phy_device *phydev;
 
-		if (bus->phy_mask & (1 << i))
+		if (bus->phy_mask & (1 << i)) {
+			bus->phy_map[i] = NULL;
 			continue;
+		}
 
 		phydev = get_phy_device(bus, i);
 
diff --git a/drivers/net/pppoe.c b/drivers/net/pppoe.c
index 475dc930380f..0d101a18026a 100644
--- a/drivers/net/pppoe.c
+++ b/drivers/net/pppoe.c
@@ -861,6 +861,9 @@ static int __pppoe_xmit(struct sock *sk, struct sk_buff *skb)
 		 * give dev_queue_xmit something it can free.
 		 */
 		skb2 = skb_clone(skb, GFP_ATOMIC);
+
+		if (skb2 == NULL)
+			goto abort;
 	}
 
 	ph = (struct pppoe_hdr *) skb_push(skb2, sizeof(struct pppoe_hdr));
diff --git a/drivers/net/sis900.c b/drivers/net/sis900.c
index b82191d2bee1..f5a3bf4d959a 100644
--- a/drivers/net/sis900.c
+++ b/drivers/net/sis900.c
@@ -127,6 +127,7 @@ static const struct mii_chip_info {
 } mii_chip_table[] = {
 	{ "SiS 900 Internal MII PHY", 		0x001d, 0x8000, LAN },
 	{ "SiS 7014 Physical Layer Solution", 	0x0016, 0xf830, LAN },
+	{ "SiS 900 on Foxconn 661 7MI",         0x0143, 0xBC70, LAN },
 	{ "Altimata AC101LF PHY",               0x0022, 0x5520, LAN },
 	{ "ADM 7001 LAN PHY",			0x002e, 0xcc60, LAN },
 	{ "AMD 79C901 10BASE-T PHY",  		0x0000, 0x6B70, LAN },
diff --git a/drivers/net/skge.c b/drivers/net/skge.c
index a70c2b0cc104..5ca5a1b546a1 100644
--- a/drivers/net/skge.c
+++ b/drivers/net/skge.c
@@ -78,8 +78,7 @@ static const struct pci_device_id skge_id_table[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, PCI_DEVICE_ID_SYSKONNECT_GE) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, PCI_DEVICE_ID_SYSKONNECT_YU) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_DLINK, PCI_DEVICE_ID_DLINK_DGE510T), },
-	{ PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4b00) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4b01) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4b01) },	/* DGE-530T */
 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4320) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x5005) }, /* Belkin */
 	{ PCI_DEVICE(PCI_VENDOR_ID_CNET, PCI_DEVICE_ID_CNET_GIGACARD) },
@@ -402,7 +401,7 @@ static int skge_set_ring_param(struct net_device *dev,
 	int err;
 
 	if (p->rx_pending == 0 || p->rx_pending > MAX_RX_RING_SIZE ||
-	    p->tx_pending == 0 || p->tx_pending > MAX_TX_RING_SIZE)
+	    p->tx_pending < MAX_SKB_FRAGS+1 || p->tx_pending > MAX_TX_RING_SIZE)
 		return -EINVAL;
 
 	skge->rx_ring.count = p->rx_pending;
@@ -2717,8 +2716,7 @@ static int skge_poll(struct net_device *dev, int *budget)
 		if (control & BMU_OWN)
 			break;
 
-		skb = skge_rx_get(skge, e, control, rd->status,
-				  le16_to_cpu(rd->csum2));
+		skb = skge_rx_get(skge, e, control, rd->status, rd->csum2);
 		if (likely(skb)) {
 			dev->last_rx = jiffies;
 			netif_receive_skb(skb);
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 67b0eab16589..959109609d85 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -51,7 +51,7 @@
 #include "sky2.h"
 
 #define DRV_NAME		"sky2"
-#define DRV_VERSION		"1.1"
+#define DRV_VERSION		"1.4"
 #define PFX			DRV_NAME " "
 
 /*
@@ -79,6 +79,8 @@
 #define NAPI_WEIGHT		64
 #define PHY_RETRIES		1000
 
+#define RING_NEXT(x,s)	(((x)+1) & ((s)-1))
+
 static const u32 default_msg =
     NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK
     | NETIF_MSG_TIMER | NETIF_MSG_TX_ERR | NETIF_MSG_RX_ERR
@@ -96,9 +98,14 @@ static int disable_msi = 0;
 module_param(disable_msi, int, 0);
 MODULE_PARM_DESC(disable_msi, "Disable Message Signaled Interrupt (MSI)");
 
+static int idle_timeout = 100;
+module_param(idle_timeout, int, 0);
+MODULE_PARM_DESC(idle_timeout, "Idle timeout workaround for lost interrupts (ms)");
+
 static const struct pci_device_id sky2_id_table[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9000) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9E00) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4b00) },	/* DGE-560T */
 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4340) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4341) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4342) },
@@ -122,6 +129,7 @@ MODULE_DEVICE_TABLE(pci, sky2_id_table);
 /* Avoid conditionals by using array */
 static const unsigned txqaddr[] = { Q_XA1, Q_XA2 };
 static const unsigned rxqaddr[] = { Q_R1, Q_R2 };
+static const u32 portirq_msk[] = { Y2_IS_PORT_1, Y2_IS_PORT_2 };
 
 /* This driver supports yukon2 chipset only */
 static const char *yukon2_name[] = {
@@ -228,6 +236,7 @@ static int sky2_set_power_state(struct sky2_hw *hw, pci_power_t state)
 		}
 
 		if (hw->chip_id == CHIP_ID_YUKON_EC_U) {
+			sky2_write16(hw, B0_CTST, Y2_HW_WOL_ON);
 			sky2_pci_write32(hw, PCI_DEV_REG3, 0);
 			reg1 = sky2_pci_read32(hw, PCI_DEV_REG4);
 			reg1 &= P_ASPM_CONTROL_MSK;
@@ -298,7 +307,8 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port)
 	struct sky2_port *sky2 = netdev_priv(hw->dev[port]);
 	u16 ctrl, ct1000, adv, pg, ledctrl, ledover;
 
-	if (sky2->autoneg == AUTONEG_ENABLE && hw->chip_id != CHIP_ID_YUKON_XL) {
+	if (sky2->autoneg == AUTONEG_ENABLE &&
+	    !(hw->chip_id == CHIP_ID_YUKON_XL || hw->chip_id == CHIP_ID_YUKON_EC_U)) {
 		u16 ectrl = gm_phy_read(hw, port, PHY_MARV_EXT_CTRL);
 
 		ectrl &= ~(PHY_M_EC_M_DSC_MSK | PHY_M_EC_S_DSC_MSK |
@@ -326,7 +336,7 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port)
 			ctrl |= PHY_M_PC_MDI_XMODE(PHY_M_PC_ENA_AUTO);
 
 			if (sky2->autoneg == AUTONEG_ENABLE &&
-			    hw->chip_id == CHIP_ID_YUKON_XL) {
+			    (hw->chip_id == CHIP_ID_YUKON_XL || hw->chip_id == CHIP_ID_YUKON_EC_U)) {
 				ctrl &= ~PHY_M_PC_DSC_MSK;
 				ctrl |= PHY_M_PC_DSC(2) | PHY_M_PC_DOWN_S_ENA;
 			}
@@ -442,10 +452,11 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port)
 		gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3);
 
 		/* set LED Function Control register */
-		gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, (PHY_M_LEDC_LOS_CTRL(1) |	/* LINK/ACT */
-							   PHY_M_LEDC_INIT_CTRL(7) |	/* 10 Mbps */
-							   PHY_M_LEDC_STA1_CTRL(7) |	/* 100 Mbps */
-							   PHY_M_LEDC_STA0_CTRL(7)));	/* 1000 Mbps */
+		gm_phy_write(hw, port, PHY_MARV_PHY_CTRL,
+			     (PHY_M_LEDC_LOS_CTRL(1) |	/* LINK/ACT */
+			      PHY_M_LEDC_INIT_CTRL(7) |	/* 10 Mbps */
+			      PHY_M_LEDC_STA1_CTRL(7) |	/* 100 Mbps */
+			      PHY_M_LEDC_STA0_CTRL(7)));	/* 1000 Mbps */
 
 		/* set Polarity Control register */
 		gm_phy_write(hw, port, PHY_MARV_PHY_STAT,
@@ -459,6 +470,25 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port)
 		/* restore page register */
 		gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
 		break;
+	case CHIP_ID_YUKON_EC_U:
+		pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
+
+		/* select page 3 to access LED control register */
+		gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3);
+
+		/* set LED Function Control register */
+		gm_phy_write(hw, port, PHY_MARV_PHY_CTRL,
+			     (PHY_M_LEDC_LOS_CTRL(1) |	/* LINK/ACT */
+			      PHY_M_LEDC_INIT_CTRL(8) |	/* 10 Mbps */
+			      PHY_M_LEDC_STA1_CTRL(7) |	/* 100 Mbps */
+			      PHY_M_LEDC_STA0_CTRL(7)));/* 1000 Mbps */
+
+		/* set Blink Rate in LED Timer Control Register */
+		gm_phy_write(hw, port, PHY_MARV_INT_MASK,
+			     ledctrl | PHY_M_LED_BLINK_RT(BLINK_84MS));
+		/* restore page register */
+		gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
+		break;
 
 	default:
 		/* set Tx LED (LED_TX) to blink mode on Rx OR Tx activity */
@@ -467,19 +497,21 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port)
 		ledover |= PHY_M_LED_MO_RX(MO_LED_OFF);
 	}
 
-	if (hw->chip_id == CHIP_ID_YUKON_EC_U && hw->chip_rev >= 2) {
+	if (hw->chip_id == CHIP_ID_YUKON_EC_U && hw->chip_rev == CHIP_REV_YU_EC_A1) {
 		/* apply fixes in PHY AFE */
-		gm_phy_write(hw, port, 22, 255);
+		pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
+		gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 255);
+
 		/* increase differential signal amplitude in 10BASE-T */
-		gm_phy_write(hw, port, 24, 0xaa99);
-		gm_phy_write(hw, port, 23, 0x2011);
+		gm_phy_write(hw, port, 0x18, 0xaa99);
+		gm_phy_write(hw, port, 0x17, 0x2011);
 
 		/* fix for IEEE A/B Symmetry failure in 1000BASE-T */
-		gm_phy_write(hw, port, 24, 0xa204);
-		gm_phy_write(hw, port, 23, 0x2002);
+		gm_phy_write(hw, port, 0x18, 0xa204);
+		gm_phy_write(hw, port, 0x17, 0x2002);
 
 		/* set page register to 0 */
-		gm_phy_write(hw, port, 22, 0);
+		gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
 	} else {
 		gm_phy_write(hw, port, PHY_MARV_LED_CTRL, ledctrl);
 
@@ -553,6 +585,11 @@ static void sky2_mac_init(struct sky2_hw *hw, unsigned port)
 
 		if (sky2->duplex == DUPLEX_FULL)
 			reg |= GM_GPCR_DUP_FULL;
+
+		/* turn off pause in 10/100mbps half duplex */
+		else if (sky2->speed != SPEED_1000 &&
+			 hw->chip_id != CHIP_ID_YUKON_EC_U)
+			sky2->tx_pause = sky2->rx_pause = 0;
 	} else
 		reg = GM_GPCR_SPEED_1000 | GM_GPCR_SPEED_100 | GM_GPCR_DUP_FULL;
 
@@ -719,7 +756,7 @@ static inline struct sky2_tx_le *get_tx_le(struct sky2_port *sky2)
 {
 	struct sky2_tx_le *le = sky2->tx_le + sky2->tx_prod;
 
-	sky2->tx_prod = (sky2->tx_prod + 1) % TX_RING_SIZE;
+	sky2->tx_prod = RING_NEXT(sky2->tx_prod, TX_RING_SIZE);
 	return le;
 }
 
@@ -735,7 +772,7 @@ static inline void sky2_put_idx(struct sky2_hw *hw, unsigned q, u16 idx)
 static inline struct sky2_rx_le *sky2_next_rx(struct sky2_port *sky2)
 {
 	struct sky2_rx_le *le = sky2->rx_le + sky2->rx_put;
-	sky2->rx_put = (sky2->rx_put + 1) % RX_LE_SIZE;
+	sky2->rx_put = RING_NEXT(sky2->rx_put, RX_LE_SIZE);
 	return le;
 }
 
@@ -925,8 +962,7 @@ static inline struct sk_buff *sky2_alloc_skb(unsigned int size, gfp_t gfp_mask)
 	skb = alloc_skb(size + RX_SKB_ALIGN, gfp_mask);
 	if (likely(skb)) {
 		unsigned long p	= (unsigned long) skb->data;
-		skb_reserve(skb,
-			((p + RX_SKB_ALIGN - 1) & ~(RX_SKB_ALIGN - 1)) - p);
+		skb_reserve(skb, ALIGN(p, RX_SKB_ALIGN) - p);
 	}
 
 	return skb;
@@ -943,6 +979,7 @@ static int sky2_rx_start(struct sky2_port *sky2)
 	struct sky2_hw *hw = sky2->hw;
 	unsigned rxq = rxqaddr[sky2->port];
 	int i;
+	unsigned thresh;
 
 	sky2->rx_put = sky2->rx_next = 0;
 	sky2_qset(hw, rxq);
@@ -967,9 +1004,21 @@ static int sky2_rx_start(struct sky2_port *sky2)
 		sky2_rx_add(sky2, re->mapaddr);
 	}
 
- 	/* Truncate oversize frames */
- 	sky2_write16(hw, SK_REG(sky2->port, RX_GMF_TR_THR), sky2->rx_bufsize - 8);
- 	sky2_write32(hw, SK_REG(sky2->port, RX_GMF_CTRL_T), RX_TRUNC_ON);
+
+	/*
+	 * The receiver hangs if it receives frames larger than the
+	 * packet buffer. As a workaround, truncate oversize frames, but
+	 * the register is limited to 9 bits, so if you do frames > 2052
+	 * you better get the MTU right!
+	 */
+	thresh = (sky2->rx_bufsize - 8) / sizeof(u32);
+	if (thresh > 0x1ff)
+		sky2_write32(hw, SK_REG(sky2->port, RX_GMF_CTRL_T), RX_TRUNC_OFF);
+	else {
+		sky2_write16(hw, SK_REG(sky2->port, RX_GMF_TR_THR), thresh);
+		sky2_write32(hw, SK_REG(sky2->port, RX_GMF_CTRL_T), RX_TRUNC_ON);
+	}
+
 
 	/* Tell chip about available buffers */
 	sky2_write16(hw, Y2_QADDR(rxq, PREF_UNIT_PUT_IDX), sky2->rx_put);
@@ -986,7 +1035,25 @@ static int sky2_up(struct net_device *dev)
 	struct sky2_hw *hw = sky2->hw;
 	unsigned port = sky2->port;
 	u32 ramsize, rxspace, imask;
-	int err = -ENOMEM;
+	int cap, err = -ENOMEM;
+	struct net_device *otherdev = hw->dev[sky2->port^1];
+
+	/*
+ 	 * On dual port PCI-X card, there is an problem where status
+	 * can be received out of order due to split transactions
+	 */
+	if (otherdev && netif_running(otherdev) &&
+ 	    (cap = pci_find_capability(hw->pdev, PCI_CAP_ID_PCIX))) {
+ 		struct sky2_port *osky2 = netdev_priv(otherdev);
+ 		u16 cmd;
+
+ 		cmd = sky2_pci_read16(hw, cap + PCI_X_CMD);
+ 		cmd &= ~PCI_X_CMD_MAX_SPLIT;
+ 		sky2_pci_write16(hw, cap + PCI_X_CMD, cmd);
+
+ 		sky2->rx_csum = 0;
+ 		osky2->rx_csum = 0;
+ 	}
 
 	if (netif_msg_ifup(sky2))
 		printk(KERN_INFO PFX "%s: enabling interface\n", dev->name);
@@ -1051,7 +1118,7 @@ static int sky2_up(struct net_device *dev)
 
 	/* Enable interrupts from phy/mac for port */
 	imask = sky2_read32(hw, B0_IMSK);
-	imask |= (port == 0) ? Y2_IS_PORT_1 : Y2_IS_PORT_2;
+	imask |= portirq_msk[port];
 	sky2_write32(hw, B0_IMSK, imask);
 
 	return 0;
@@ -1079,7 +1146,7 @@ err_out:
 /* Modular subtraction in ring */
 static inline int tx_dist(unsigned tail, unsigned head)
 {
-	return (head - tail) % TX_RING_SIZE;
+	return (head - tail) & (TX_RING_SIZE - 1);
 }
 
 /* Number of list elements available for next tx */
@@ -1256,7 +1323,7 @@ static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev)
 		le->opcode = OP_BUFFER | HW_OWNER;
 
 		fre = sky2->tx_ring
-		    + ((re - sky2->tx_ring) + i + 1) % TX_RING_SIZE;
+		    + RING_NEXT((re - sky2->tx_ring) + i, TX_RING_SIZE);
 		pci_unmap_addr_set(fre, mapaddr, mapping);
 	}
 
@@ -1316,7 +1383,7 @@ static void sky2_tx_complete(struct sky2_port *sky2, u16 done)
 
 		for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
 			struct tx_ring_info *fre;
-			fre = sky2->tx_ring + (put + i + 1) % TX_RING_SIZE;
+			fre = sky2->tx_ring + RING_NEXT(put + i, TX_RING_SIZE);
 			pci_unmap_page(pdev, pci_unmap_addr(fre, mapaddr),
 				       skb_shinfo(skb)->frags[i].size,
 				       PCI_DMA_TODEVICE);
@@ -1402,7 +1469,7 @@ static int sky2_down(struct net_device *dev)
 
 	/* Disable port IRQ */
 	imask = sky2_read32(hw, B0_IMSK);
-	imask &= ~(sky2->port == 0) ? Y2_IS_PORT_1 : Y2_IS_PORT_2;
+	imask &= ~portirq_msk[port];
 	sky2_write32(hw, B0_IMSK, imask);
 
 	/* turn off LED's */
@@ -1499,17 +1566,26 @@ static void sky2_link_up(struct sky2_port *sky2)
 	sky2_write8(hw, SK_REG(port, LNK_LED_REG),
 		    LINKLED_ON | LINKLED_BLINK_OFF | LINKLED_LINKSYNC_OFF);
 
-	if (hw->chip_id == CHIP_ID_YUKON_XL) {
+	if (hw->chip_id == CHIP_ID_YUKON_XL || hw->chip_id == CHIP_ID_YUKON_EC_U) {
 		u16 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
+		u16 led = PHY_M_LEDC_LOS_CTRL(1);	/* link active */
+
+		switch(sky2->speed) {
+		case SPEED_10:
+			led |= PHY_M_LEDC_INIT_CTRL(7);
+			break;
+
+		case SPEED_100:
+			led |= PHY_M_LEDC_STA1_CTRL(7);
+			break;
+
+		case SPEED_1000:
+			led |= PHY_M_LEDC_STA0_CTRL(7);
+			break;
+		}
 
 		gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3);
-		gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, PHY_M_LEDC_LOS_CTRL(1) |	/* LINK/ACT */
-			     PHY_M_LEDC_INIT_CTRL(sky2->speed ==
-						  SPEED_10 ? 7 : 0) |
-			     PHY_M_LEDC_STA1_CTRL(sky2->speed ==
-						  SPEED_100 ? 7 : 0) |
-			     PHY_M_LEDC_STA0_CTRL(sky2->speed ==
-						  SPEED_1000 ? 7 : 0));
+		gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, led);
 		gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
 	}
 
@@ -1584,7 +1660,7 @@ static int sky2_autoneg_done(struct sky2_port *sky2, u16 aux)
 	sky2->speed = sky2_phy_speed(hw, aux);
 
 	/* Pause bits are offset (9..8) */
-	if (hw->chip_id == CHIP_ID_YUKON_XL)
+	if (hw->chip_id == CHIP_ID_YUKON_XL || hw->chip_id == CHIP_ID_YUKON_EC_U)
 		aux >>= 6;
 
 	sky2->rx_pause = (aux & PHY_M_PS_RX_P_EN) != 0;
@@ -1686,13 +1762,12 @@ static void sky2_tx_timeout(struct net_device *dev)
 }
 
 
-#define roundup(x, y)   ((((x)+((y)-1))/(y))*(y))
 /* Want receive buffer size to be multiple of 64 bits
  * and incl room for vlan and truncation
  */
 static inline unsigned sky2_buf_size(int mtu)
 {
-	return roundup(mtu + ETH_HLEN + VLAN_HLEN, 8) + 8;
+	return ALIGN(mtu + ETH_HLEN + VLAN_HLEN, 8) + 8;
 }
 
 static int sky2_change_mtu(struct net_device *dev, int new_mtu)
@@ -1857,39 +1932,38 @@ static inline void sky2_tx_done(struct net_device *dev, u16 last)
 	}
 }
 
+/* Is status ring empty or is there more to do? */
+static inline int sky2_more_work(const struct sky2_hw *hw)
+{
+	return (hw->st_idx != sky2_read16(hw, STAT_PUT_IDX));
+}
+
 /* Process status response ring */
 static int sky2_status_intr(struct sky2_hw *hw, int to_do)
 {
 	int work_done = 0;
+	u16 hwidx = sky2_read16(hw, STAT_PUT_IDX);
 
 	rmb();
 
-	for(;;) {
+	while (hw->st_idx != hwidx) {
 		struct sky2_status_le *le  = hw->st_le + hw->st_idx;
 		struct net_device *dev;
 		struct sky2_port *sky2;
 		struct sk_buff *skb;
 		u32 status;
 		u16 length;
-		u8  link, opcode;
 
-		opcode = le->opcode;
-		if (!opcode)
-			break;
-		opcode &= ~HW_OWNER;
+		hw->st_idx = RING_NEXT(hw->st_idx, STATUS_RING_SIZE);
 
-		hw->st_idx = (hw->st_idx + 1) % STATUS_RING_SIZE;
-		le->opcode = 0;
-
-		link = le->link;
-		BUG_ON(link >= 2);
-		dev = hw->dev[link];
+		BUG_ON(le->link >= 2);
+		dev = hw->dev[le->link];
 
 		sky2 = netdev_priv(dev);
 		length = le->length;
 		status = le->status;
 
-		switch (opcode) {
+		switch (le->opcode & ~HW_OWNER) {
 		case OP_RXSTAT:
 			skb = sky2_receive(sky2, length, status);
 			if (!skb)
@@ -1929,7 +2003,8 @@ static int sky2_status_intr(struct sky2_hw *hw, int to_do)
 
 		case OP_TXINDEXLE:
 			/* TX index reports status for both ports */
-			sky2_tx_done(hw->dev[0], status & 0xffff);
+			BUILD_BUG_ON(TX_RING_SIZE > 0x1000);
+			sky2_tx_done(hw->dev[0], status & 0xfff);
 			if (hw->dev[1])
 				sky2_tx_done(hw->dev[1],
 				     ((status >> 24) & 0xff)
@@ -1939,8 +2014,8 @@ static int sky2_status_intr(struct sky2_hw *hw, int to_do)
 		default:
 			if (net_ratelimit())
 				printk(KERN_WARNING PFX
-				       "unknown status opcode 0x%x\n", opcode);
-			break;
+				       "unknown status opcode 0x%x\n", le->opcode);
+			goto exit_loop;
 		}
 	}
 
@@ -2086,6 +2161,21 @@ static void sky2_descriptor_error(struct sky2_hw *hw, unsigned port,
 	}
 }
 
+/* If idle then force a fake soft NAPI poll once a second
+ * to work around cases where sharing an edge triggered interrupt.
+ */
+static void sky2_idle(unsigned long arg)
+{
+	struct sky2_hw *hw = (struct sky2_hw *) arg;
+	struct net_device *dev = hw->dev[0];
+
+	if (__netif_rx_schedule_prep(dev))
+		__netif_rx_schedule(dev);
+
+	mod_timer(&hw->idle_timer, jiffies + msecs_to_jiffies(idle_timeout));
+}
+
+
 static int sky2_poll(struct net_device *dev0, int *budget)
 {
 	struct sky2_hw *hw = ((struct sky2_port *) netdev_priv(dev0))->hw;
@@ -2093,49 +2183,46 @@ static int sky2_poll(struct net_device *dev0, int *budget)
 	int work_done = 0;
 	u32 status = sky2_read32(hw, B0_Y2_SP_EISR);
 
-	if (unlikely(status & ~Y2_IS_STAT_BMU)) {
-		if (status & Y2_IS_HW_ERR)
-			sky2_hw_intr(hw);
-
-		if (status & Y2_IS_IRQ_PHY1)
-			sky2_phy_intr(hw, 0);
+	if (status & Y2_IS_HW_ERR)
+		sky2_hw_intr(hw);
 
-		if (status & Y2_IS_IRQ_PHY2)
-			sky2_phy_intr(hw, 1);
+	if (status & Y2_IS_IRQ_PHY1)
+		sky2_phy_intr(hw, 0);
 
-		if (status & Y2_IS_IRQ_MAC1)
-			sky2_mac_intr(hw, 0);
+	if (status & Y2_IS_IRQ_PHY2)
+		sky2_phy_intr(hw, 1);
 
-		if (status & Y2_IS_IRQ_MAC2)
-			sky2_mac_intr(hw, 1);
+	if (status & Y2_IS_IRQ_MAC1)
+		sky2_mac_intr(hw, 0);
 
-		if (status & Y2_IS_CHK_RX1)
-			sky2_descriptor_error(hw, 0, "receive", Y2_IS_CHK_RX1);
+	if (status & Y2_IS_IRQ_MAC2)
+		sky2_mac_intr(hw, 1);
 
-		if (status & Y2_IS_CHK_RX2)
-			sky2_descriptor_error(hw, 1, "receive", Y2_IS_CHK_RX2);
+	if (status & Y2_IS_CHK_RX1)
+		sky2_descriptor_error(hw, 0, "receive", Y2_IS_CHK_RX1);
 
-		if (status & Y2_IS_CHK_TXA1)
-			sky2_descriptor_error(hw, 0, "transmit", Y2_IS_CHK_TXA1);
+	if (status & Y2_IS_CHK_RX2)
+		sky2_descriptor_error(hw, 1, "receive", Y2_IS_CHK_RX2);
 
-		if (status & Y2_IS_CHK_TXA2)
-			sky2_descriptor_error(hw, 1, "transmit", Y2_IS_CHK_TXA2);
-	}
+	if (status & Y2_IS_CHK_TXA1)
+		sky2_descriptor_error(hw, 0, "transmit", Y2_IS_CHK_TXA1);
 
-	if (status & Y2_IS_STAT_BMU) {
-		work_done = sky2_status_intr(hw, work_limit);
-		*budget -= work_done;
-		dev0->quota -= work_done;
+	if (status & Y2_IS_CHK_TXA2)
+		sky2_descriptor_error(hw, 1, "transmit", Y2_IS_CHK_TXA2);
 
-		if (work_done >= work_limit)
-			return 1;
+	work_done = sky2_status_intr(hw, work_limit);
+	*budget -= work_done;
+	dev0->quota -= work_done;
 
+	if (status & Y2_IS_STAT_BMU)
 		sky2_write32(hw, STAT_CTRL, SC_STAT_CLR_IRQ);
-	}
+
+	if (sky2_more_work(hw))
+		return 1;
 
 	netif_rx_complete(dev0);
 
-	status = sky2_read32(hw, B0_Y2_SP_LISR);
+	sky2_read32(hw, B0_Y2_SP_LISR);
 	return 0;
 }
 
@@ -2153,8 +2240,6 @@ static irqreturn_t sky2_intr(int irq, void *dev_id, struct pt_regs *regs)
 	prefetch(&hw->st_le[hw->st_idx]);
 	if (likely(__netif_rx_schedule_prep(dev0)))
 		__netif_rx_schedule(dev0);
-	else
-		printk(KERN_DEBUG PFX "irq race detected\n");
 
 	return IRQ_HANDLED;
 }
@@ -2193,7 +2278,7 @@ static inline u32 sky2_clk2us(const struct sky2_hw *hw, u32 clk)
 }
 
 
-static int sky2_reset(struct sky2_hw *hw)
+static int __devinit sky2_reset(struct sky2_hw *hw)
 {
 	u16 status;
 	u8 t8, pmd_type;
@@ -2218,13 +2303,6 @@ static int sky2_reset(struct sky2_hw *hw)
 		return -EOPNOTSUPP;
 	}
 
-	/* This chip is new and not tested yet */
-	if (hw->chip_id == CHIP_ID_YUKON_EC_U) {
-		pr_info(PFX "%s: is a version of Yukon 2 chipset that has not been tested yet.\n",
-			pci_name(hw->pdev));
-		pr_info("Please report success/failure to maintainer <shemminger@osdl.org>\n");
-	}
-
 	/* disable ASF */
 	if (hw->chip_id <= CHIP_ID_YUKON_EC) {
 		sky2_write8(hw, B28_Y2_ASF_STAT_CMD, Y2_ASF_RESET);
@@ -3028,12 +3106,7 @@ static __devinit struct net_device *sky2_init_netdev(struct sky2_hw *hw,
 	sky2->duplex = -1;
 	sky2->speed = -1;
 	sky2->advertising = sky2_supported_modes(hw);
-
-	/* Receive checksum disabled for Yukon XL
-	 * because of observed problems with incorrect
-	 * values when multiple packets are received in one interrupt
-	 */
-	sky2->rx_csum = (hw->chip_id != CHIP_ID_YUKON_XL);
+	sky2->rx_csum = 1;
 
 	spin_lock_init(&sky2->phy_lock);
 	sky2->tx_pending = TX_DEF_PENDING;
@@ -3276,6 +3349,11 @@ static int __devinit sky2_probe(struct pci_dev *pdev,
 
 	sky2_write32(hw, B0_IMSK, Y2_IS_BASE);
 
+	setup_timer(&hw->idle_timer, sky2_idle, (unsigned long) hw);
+	if (idle_timeout > 0)
+		mod_timer(&hw->idle_timer,
+			  jiffies + msecs_to_jiffies(idle_timeout));
+
 	pci_set_drvdata(pdev, hw);
 
 	return 0;
@@ -3311,13 +3389,17 @@ static void __devexit sky2_remove(struct pci_dev *pdev)
 	if (!hw)
 		return;
 
+	del_timer_sync(&hw->idle_timer);
+
+	sky2_write32(hw, B0_IMSK, 0);
+	synchronize_irq(hw->pdev->irq);
+
 	dev0 = hw->dev[0];
 	dev1 = hw->dev[1];
 	if (dev1)
 		unregister_netdev(dev1);
 	unregister_netdev(dev0);
 
-	sky2_write32(hw, B0_IMSK, 0);
 	sky2_set_power_state(hw, PCI_D3hot);
 	sky2_write16(hw, B0_Y2LED, LED_STAT_OFF);
 	sky2_write8(hw, B0_CTST, CS_RST_SET);
diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h
index 89dd18cd12f0..8a0bc5525f0a 100644
--- a/drivers/net/sky2.h
+++ b/drivers/net/sky2.h
@@ -214,6 +214,8 @@ enum csr_regs {
 enum {
 	Y2_VMAIN_AVAIL	= 1<<17,/* VMAIN available (YUKON-2 only) */
 	Y2_VAUX_AVAIL	= 1<<16,/* VAUX available (YUKON-2 only) */
+	Y2_HW_WOL_ON	= 1<<15,/* HW WOL On  (Yukon-EC Ultra A1 only) */
+	Y2_HW_WOL_OFF	= 1<<14,/* HW WOL On  (Yukon-EC Ultra A1 only) */
 	Y2_ASF_ENABLE	= 1<<13,/* ASF Unit Enable (YUKON-2 only) */
 	Y2_ASF_DISABLE	= 1<<12,/* ASF Unit Disable (YUKON-2 only) */
 	Y2_CLK_RUN_ENA	= 1<<11,/* CLK_RUN Enable  (YUKON-2 only) */
@@ -378,6 +380,9 @@ enum {
 	CHIP_REV_YU_EC_A1    = 0,  /* Chip Rev. for Yukon-EC A1/A0 */
 	CHIP_REV_YU_EC_A2    = 1,  /* Chip Rev. for Yukon-EC A2 */
 	CHIP_REV_YU_EC_A3    = 2,  /* Chip Rev. for Yukon-EC A3 */
+
+	CHIP_REV_YU_EC_U_A0  = 0,
+	CHIP_REV_YU_EC_U_A1  = 1,
 };
 
 /*	B2_Y2_CLK_GATE	 8 bit	Clock Gating (Yukon-2 only) */
@@ -1880,6 +1885,8 @@ struct sky2_hw {
 	struct sky2_status_le *st_le;
 	u32		     st_idx;
 	dma_addr_t   	     st_dma;
+
+	struct timer_list    idle_timer;
 	int		     msi_detected;
 	wait_queue_head_t    msi_wait;
 };
diff --git a/drivers/net/spider_net.c b/drivers/net/spider_net.c
index 43f5e86fc559..394339d5e87c 100644
--- a/drivers/net/spider_net.c
+++ b/drivers/net/spider_net.c
@@ -1652,6 +1652,8 @@ spider_net_enable_card(struct spider_net_card *card)
 		{ SPIDER_NET_GFTRESTRT, SPIDER_NET_RESTART_VALUE },
 
 		{ SPIDER_NET_GMRWOLCTRL, 0 },
+		{ SPIDER_NET_GTESTMD, 0x10000000 },
+		{ SPIDER_NET_GTTQMSK, 0x00400040 },
 		{ SPIDER_NET_GTESTMD, 0 },
 
 		{ SPIDER_NET_GMACINTEN, 0 },
@@ -1792,15 +1794,7 @@ spider_net_setup_phy(struct spider_net_card *card)
 	if (phy->def->ops->setup_forced)
 		phy->def->ops->setup_forced(phy, SPEED_1000, DUPLEX_FULL);
 
-	/* the following two writes could be moved to sungem_phy.c */
-	/* enable fiber mode */
-	spider_net_write_phy(card->netdev, 1, MII_NCONFIG, 0x9020);
-	/* LEDs active in both modes, autosense prio = fiber */
-	spider_net_write_phy(card->netdev, 1, MII_NCONFIG, 0x945f);
-
-	/* switch off fibre autoneg */
-	spider_net_write_phy(card->netdev, 1, MII_NCONFIG, 0xfc01);
-	spider_net_write_phy(card->netdev, 1, 0x0b, 0x0004);
+	phy->def->ops->enable_fiber(phy);
 
 	phy->def->ops->read_link(phy);
 	pr_info("Found %s with %i Mbps, %s-duplex.\n", phy->def->name,
diff --git a/drivers/net/spider_net.h b/drivers/net/spider_net.h
index 5922b529a048..3b8d951cf73c 100644
--- a/drivers/net/spider_net.h
+++ b/drivers/net/spider_net.h
@@ -120,6 +120,8 @@ extern char spider_net_driver_name[];
 #define SPIDER_NET_GMRUAFILnR		0x00000500
 #define SPIDER_NET_GMRUA0FIL15R		0x00000578
 
+#define SPIDER_NET_GTTQMSK		0x00000934
+
 /* RX DMA controller registers, all 0x00000a.. are for DMA controller A,
  * 0x00000b.. for DMA controller B, etc. */
 #define SPIDER_NET_GDADCHA		0x00000a00
diff --git a/drivers/net/sungem_phy.c b/drivers/net/sungem_phy.c
index cb0aba95d4e3..b2ddd5e79303 100644
--- a/drivers/net/sungem_phy.c
+++ b/drivers/net/sungem_phy.c
@@ -275,7 +275,7 @@ static int bcm5411_init(struct mii_phy* phy)
 	return 0;
 }
 
-static int bcm5411_suspend(struct mii_phy* phy)
+static int generic_suspend(struct mii_phy* phy)
 {
 	phy_write(phy, MII_BMCR, BMCR_PDOWN);
 
@@ -329,6 +329,30 @@ static int bcm5421_init(struct mii_phy* phy)
 	return 0;
 }
 
+static int bcm5421_enable_fiber(struct mii_phy* phy)
+{
+	/* enable fiber mode */
+	phy_write(phy, MII_NCONFIG, 0x9020);
+	/* LEDs active in both modes, autosense prio = fiber */
+	phy_write(phy, MII_NCONFIG, 0x945f);
+
+	/* switch off fibre autoneg */
+	phy_write(phy, MII_NCONFIG, 0xfc01);
+	phy_write(phy, 0x0b, 0x0004);
+
+	return 0;
+}
+
+static int bcm5461_enable_fiber(struct mii_phy* phy)
+{
+        phy_write(phy, MII_NCONFIG, 0xfc0c);
+        phy_write(phy, MII_BMCR, 0x4140);
+        phy_write(phy, MII_NCONFIG, 0xfc0b);
+	phy_write(phy, MII_BMCR, 0x0140);
+
+	return 0;
+}
+
 static int bcm54xx_setup_aneg(struct mii_phy *phy, u32 advertise)
 {
 	u16 ctl, adv;
@@ -738,7 +762,7 @@ static struct mii_phy_def bcm5401_phy_def = {
 /* Broadcom BCM 5411 */
 static struct mii_phy_ops bcm5411_phy_ops = {
 	.init		= bcm5411_init,
-	.suspend	= bcm5411_suspend,
+	.suspend	= generic_suspend,
 	.setup_aneg	= bcm54xx_setup_aneg,
 	.setup_forced	= bcm54xx_setup_forced,
 	.poll_link	= genmii_poll_link,
@@ -757,11 +781,12 @@ static struct mii_phy_def bcm5411_phy_def = {
 /* Broadcom BCM 5421 */
 static struct mii_phy_ops bcm5421_phy_ops = {
 	.init		= bcm5421_init,
-	.suspend	= bcm5411_suspend,
+	.suspend	= generic_suspend,
 	.setup_aneg	= bcm54xx_setup_aneg,
 	.setup_forced	= bcm54xx_setup_forced,
 	.poll_link	= genmii_poll_link,
 	.read_link	= bcm54xx_read_link,
+	.enable_fiber   = bcm5421_enable_fiber,
 };
 
 static struct mii_phy_def bcm5421_phy_def = {
@@ -776,7 +801,7 @@ static struct mii_phy_def bcm5421_phy_def = {
 /* Broadcom BCM 5421 built-in K2 */
 static struct mii_phy_ops bcm5421k2_phy_ops = {
 	.init		= bcm5421_init,
-	.suspend	= bcm5411_suspend,
+	.suspend	= generic_suspend,
 	.setup_aneg	= bcm54xx_setup_aneg,
 	.setup_forced	= bcm54xx_setup_forced,
 	.poll_link	= genmii_poll_link,
@@ -792,10 +817,29 @@ static struct mii_phy_def bcm5421k2_phy_def = {
 	.ops		= &bcm5421k2_phy_ops
 };
 
+static struct mii_phy_ops bcm5461_phy_ops = {
+	.init		= bcm5421_init,
+	.suspend	= generic_suspend,
+	.setup_aneg	= bcm54xx_setup_aneg,
+	.setup_forced	= bcm54xx_setup_forced,
+	.poll_link	= genmii_poll_link,
+	.read_link	= bcm54xx_read_link,
+	.enable_fiber   = bcm5461_enable_fiber,
+};
+
+static struct mii_phy_def bcm5461_phy_def = {
+	.phy_id		= 0x002060c0,
+	.phy_id_mask	= 0xfffffff0,
+	.name		= "BCM5461",
+	.features	= MII_GBIT_FEATURES,
+	.magic_aneg	= 1,
+	.ops		= &bcm5461_phy_ops
+};
+
 /* Broadcom BCM 5462 built-in Vesta */
 static struct mii_phy_ops bcm5462V_phy_ops = {
 	.init		= bcm5421_init,
-	.suspend	= bcm5411_suspend,
+	.suspend	= generic_suspend,
 	.setup_aneg	= bcm54xx_setup_aneg,
 	.setup_forced	= bcm54xx_setup_forced,
 	.poll_link	= genmii_poll_link,
@@ -816,6 +860,7 @@ static struct mii_phy_def bcm5462V_phy_def = {
  * would be useful here) --BenH.
  */
 static struct mii_phy_ops marvell_phy_ops = {
+	.suspend	= generic_suspend,
 	.setup_aneg	= marvell_setup_aneg,
 	.setup_forced	= marvell_setup_forced,
 	.poll_link	= genmii_poll_link,
@@ -856,6 +901,7 @@ static struct mii_phy_def* mii_phy_table[] = {
 	&bcm5411_phy_def,
 	&bcm5421_phy_def,
 	&bcm5421k2_phy_def,
+	&bcm5461_phy_def,
 	&bcm5462V_phy_def,
 	&marvell_phy_def,
 	&genmii_phy_def,
diff --git a/drivers/net/sungem_phy.h b/drivers/net/sungem_phy.h
index 430544496c52..69e125197fcf 100644
--- a/drivers/net/sungem_phy.h
+++ b/drivers/net/sungem_phy.h
@@ -12,6 +12,7 @@ struct mii_phy_ops
 	int		(*setup_forced)(struct mii_phy *phy, int speed, int fd);
 	int		(*poll_link)(struct mii_phy *phy);
 	int		(*read_link)(struct mii_phy *phy);
+	int		(*enable_fiber)(struct mii_phy *phy);
 };
 
 /* Structure used to statically define an mii/gii based PHY */
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 73e271e59c6a..49ad60b72657 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -69,8 +69,8 @@
 
 #define DRV_MODULE_NAME		"tg3"
 #define PFX DRV_MODULE_NAME	": "
-#define DRV_MODULE_VERSION	"3.56"
-#define DRV_MODULE_RELDATE	"Apr 1, 2006"
+#define DRV_MODULE_VERSION	"3.58"
+#define DRV_MODULE_RELDATE	"May 22, 2006"
 
 #define TG3_DEF_MAC_MODE	0
 #define TG3_DEF_RX_MODE		0
@@ -974,6 +974,8 @@ static int tg3_phy_reset_5703_4_5(struct tg3 *tp)
 	return err;
 }
 
+static void tg3_link_report(struct tg3 *);
+
 /* This will reset the tigon3 PHY if there is no valid
  * link unless the FORCE argument is non-zero.
  */
@@ -987,6 +989,11 @@ static int tg3_phy_reset(struct tg3 *tp)
 	if (err != 0)
 		return -EBUSY;
 
+	if (netif_running(tp->dev) && netif_carrier_ok(tp->dev)) {
+		netif_carrier_off(tp->dev);
+		tg3_link_report(tp);
+	}
+
 	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5703 ||
 	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704 ||
 	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705) {
@@ -1023,6 +1030,12 @@ out:
 		tg3_writephy(tp, MII_TG3_DSP_RW_PORT, 0x14e2);
 		tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x0400);
 	}
+	else if (tp->tg3_flags2 & TG3_FLG2_PHY_JITTER_BUG) {
+		tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x0c00);
+		tg3_writephy(tp, MII_TG3_DSP_ADDRESS, 0x000a);
+		tg3_writephy(tp, MII_TG3_DSP_RW_PORT, 0x010b);
+		tg3_writephy(tp, MII_TG3_AUX_CTRL, 0x0400);
+	}
 	/* Set Extended packet length bit (bit 14) on all chips that */
 	/* support jumbo frames */
 	if ((tp->phy_id & PHY_ID_MASK) == PHY_ID_BCM5401) {
@@ -3531,7 +3544,7 @@ static irqreturn_t tg3_test_isr(int irq, void *dev_id,
 	return IRQ_RETVAL(0);
 }
 
-static int tg3_init_hw(struct tg3 *);
+static int tg3_init_hw(struct tg3 *, int);
 static int tg3_halt(struct tg3 *, int, int);
 
 #ifdef CONFIG_NET_POLL_CONTROLLER
@@ -3567,7 +3580,7 @@ static void tg3_reset_task(void *_data)
 	tp->tg3_flags2 &= ~TG3_FLG2_RESTART_TIMER;
 
 	tg3_halt(tp, RESET_KIND_SHUTDOWN, 0);
-	tg3_init_hw(tp);
+	tg3_init_hw(tp, 1);
 
 	tg3_netif_start(tp);
 
@@ -4042,7 +4055,7 @@ static int tg3_change_mtu(struct net_device *dev, int new_mtu)
 
 	tg3_set_mtu(dev, tp, new_mtu);
 
-	tg3_init_hw(tp);
+	tg3_init_hw(tp, 0);
 
 	tg3_netif_start(tp);
 
@@ -5719,9 +5732,23 @@ static int tg3_set_mac_addr(struct net_device *dev, void *p)
 	if (!netif_running(dev))
 		return 0;
 
-	spin_lock_bh(&tp->lock);
-	__tg3_set_mac_addr(tp);
-	spin_unlock_bh(&tp->lock);
+	if (tp->tg3_flags & TG3_FLAG_ENABLE_ASF) {
+		/* Reset chip so that ASF can re-init any MAC addresses it
+		 * needs.
+		 */
+		tg3_netif_stop(tp);
+		tg3_full_lock(tp, 1);
+
+		tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
+		tg3_init_hw(tp, 0);
+
+		tg3_netif_start(tp);
+		tg3_full_unlock(tp);
+	} else {
+		spin_lock_bh(&tp->lock);
+		__tg3_set_mac_addr(tp);
+		spin_unlock_bh(&tp->lock);
+	}
 
 	return 0;
 }
@@ -5771,7 +5798,7 @@ static void __tg3_set_coalesce(struct tg3 *tp, struct ethtool_coalesce *ec)
 }
 
 /* tp->lock is held. */
-static int tg3_reset_hw(struct tg3 *tp)
+static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
 {
 	u32 val, rdmac_mode;
 	int i, err, limit;
@@ -5786,7 +5813,7 @@ static int tg3_reset_hw(struct tg3 *tp)
 		tg3_abort_hw(tp, 1);
 	}
 
-	if (tp->tg3_flags2 & TG3_FLG2_MII_SERDES)
+	if ((tp->tg3_flags2 & TG3_FLG2_MII_SERDES) && reset_phy)
 		tg3_phy_reset(tp);
 
 	err = tg3_chip_reset(tp);
@@ -6327,7 +6354,7 @@ static int tg3_reset_hw(struct tg3 *tp)
 		tw32(GRC_LOCAL_CTRL, tp->grc_local_ctrl);
 	}
 
-	err = tg3_setup_phy(tp, 1);
+	err = tg3_setup_phy(tp, reset_phy);
 	if (err)
 		return err;
 
@@ -6400,7 +6427,7 @@ static int tg3_reset_hw(struct tg3 *tp)
 /* Called at device open time to get the chip ready for
  * packet processing.  Invoked with tp->lock held.
  */
-static int tg3_init_hw(struct tg3 *tp)
+static int tg3_init_hw(struct tg3 *tp, int reset_phy)
 {
 	int err;
 
@@ -6413,7 +6440,7 @@ static int tg3_init_hw(struct tg3 *tp)
 
 	tw32(TG3PCI_MEM_WIN_BASE_ADDR, 0);
 
-	err = tg3_reset_hw(tp);
+	err = tg3_reset_hw(tp, reset_phy);
 
 out:
 	return err;
@@ -6461,6 +6488,10 @@ static void tg3_periodic_fetch_stats(struct tg3 *tp)
 	TG3_STAT_ADD32(&sp->rx_frame_too_long_errors, MAC_RX_STATS_FRAME_TOO_LONG);
 	TG3_STAT_ADD32(&sp->rx_jabbers, MAC_RX_STATS_JABBERS);
 	TG3_STAT_ADD32(&sp->rx_undersize_packets, MAC_RX_STATS_UNDERSIZE);
+
+	TG3_STAT_ADD32(&sp->rxbds_empty, RCVLPC_NO_RCV_BD_CNT);
+	TG3_STAT_ADD32(&sp->rx_discards, RCVLPC_IN_DISCARDS_CNT);
+	TG3_STAT_ADD32(&sp->rx_errors, RCVLPC_IN_ERRORS_CNT);
 }
 
 static void tg3_timer(unsigned long __opaque)
@@ -6683,7 +6714,7 @@ static int tg3_test_msi(struct tg3 *tp)
 	tg3_full_lock(tp, 1);
 
 	tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
-	err = tg3_init_hw(tp);
+	err = tg3_init_hw(tp, 1);
 
 	tg3_full_unlock(tp);
 
@@ -6748,7 +6779,7 @@ static int tg3_open(struct net_device *dev)
 
 	tg3_full_lock(tp, 0);
 
-	err = tg3_init_hw(tp);
+	err = tg3_init_hw(tp, 1);
 	if (err) {
 		tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
 		tg3_free_rings(tp);
@@ -7626,21 +7657,23 @@ static int tg3_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 		cmd->supported |= (SUPPORTED_1000baseT_Half |
 				   SUPPORTED_1000baseT_Full);
 
-	if (!(tp->tg3_flags2 & TG3_FLG2_ANY_SERDES))
+	if (!(tp->tg3_flags2 & TG3_FLG2_ANY_SERDES)) {
 		cmd->supported |= (SUPPORTED_100baseT_Half |
 				  SUPPORTED_100baseT_Full |
 				  SUPPORTED_10baseT_Half |
 				  SUPPORTED_10baseT_Full |
 				  SUPPORTED_MII);
-	else
+		cmd->port = PORT_TP;
+	} else {
 		cmd->supported |= SUPPORTED_FIBRE;
+		cmd->port = PORT_FIBRE;
+	}
   
 	cmd->advertising = tp->link_config.advertising;
 	if (netif_running(dev)) {
 		cmd->speed = tp->link_config.active_speed;
 		cmd->duplex = tp->link_config.active_duplex;
 	}
-	cmd->port = 0;
 	cmd->phy_address = PHY_ADDR;
 	cmd->transceiver = 0;
 	cmd->autoneg = tp->link_config.autoneg;
@@ -7839,7 +7872,7 @@ static int tg3_set_ringparam(struct net_device *dev, struct ethtool_ringparam *e
 
 	if (netif_running(dev)) {
 		tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
-		tg3_init_hw(tp);
+		tg3_init_hw(tp, 1);
 		tg3_netif_start(tp);
 	}
 
@@ -7884,7 +7917,7 @@ static int tg3_set_pauseparam(struct net_device *dev, struct ethtool_pauseparam
 
 	if (netif_running(dev)) {
 		tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
-		tg3_init_hw(tp);
+		tg3_init_hw(tp, 1);
 		tg3_netif_start(tp);
 	}
 
@@ -8427,6 +8460,9 @@ static int tg3_run_loopback(struct tg3 *tp, int loopback_mode)
 
 	tx_len = 1514;
 	skb = dev_alloc_skb(tx_len);
+	if (!skb)
+		return -ENOMEM;
+
 	tx_data = skb_put(skb, tx_len);
 	memcpy(tx_data, tp->dev->dev_addr, 6);
 	memset(tx_data + 6, 0x0, 8);
@@ -8522,7 +8558,7 @@ static int tg3_test_loopback(struct tg3 *tp)
 	if (!netif_running(tp->dev))
 		return TG3_LOOPBACK_FAILED;
 
-	tg3_reset_hw(tp);
+	tg3_reset_hw(tp, 1);
 
 	if (tg3_run_loopback(tp, TG3_MAC_LOOPBACK))
 		err |= TG3_MAC_LOOPBACK_FAILED;
@@ -8596,7 +8632,7 @@ static void tg3_self_test(struct net_device *dev, struct ethtool_test *etest,
 		tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
 		if (netif_running(dev)) {
 			tp->tg3_flags |= TG3_FLAG_INIT_COMPLETE;
-			tg3_init_hw(tp);
+			tg3_init_hw(tp, 1);
 			tg3_netif_start(tp);
 		}
 
@@ -9377,7 +9413,7 @@ static int tg3_nvram_write_block_buffered(struct tg3 *tp, u32 offset, u32 len,
 
 	        if ((page_off == 0) || (i == 0))
 			nvram_cmd |= NVRAM_CMD_FIRST;
-		else if (page_off == (tp->nvram_pagesize - 4))
+		if (page_off == (tp->nvram_pagesize - 4))
 			nvram_cmd |= NVRAM_CMD_LAST;
 
 		if (i == (len - 4))
@@ -10353,10 +10389,13 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
 	if (tp->pci_chip_rev_id == CHIPREV_ID_5704_A0)
 		tp->tg3_flags2 |= TG3_FLG2_PHY_5704_A0_BUG;
 
-	if ((tp->tg3_flags2 & TG3_FLG2_5705_PLUS) &&
-	    (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5755) &&
-	    (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5787))
-		tp->tg3_flags2 |= TG3_FLG2_PHY_BER_BUG;
+	if (tp->tg3_flags2 & TG3_FLG2_5705_PLUS) {
+		if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5755 ||
+		    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5787)
+			tp->tg3_flags2 |= TG3_FLG2_PHY_JITTER_BUG;
+		else
+			tp->tg3_flags2 |= TG3_FLG2_PHY_BER_BUG;
+	}
 
 	tp->coalesce_mode = 0;
 	if (GET_CHIP_REV(tp->pci_chip_rev_id) != CHIPREV_5700_AX &&
@@ -11569,7 +11608,7 @@ static int tg3_suspend(struct pci_dev *pdev, pm_message_t state)
 		tg3_full_lock(tp, 0);
 
 		tp->tg3_flags |= TG3_FLAG_INIT_COMPLETE;
-		tg3_init_hw(tp);
+		tg3_init_hw(tp, 1);
 
 		tp->timer.expires = jiffies + tp->timer_offset;
 		add_timer(&tp->timer);
@@ -11603,7 +11642,7 @@ static int tg3_resume(struct pci_dev *pdev)
 	tg3_full_lock(tp, 0);
 
 	tp->tg3_flags |= TG3_FLAG_INIT_COMPLETE;
-	tg3_init_hw(tp);
+	tg3_init_hw(tp, 1);
 
 	tp->timer.expires = jiffies + tp->timer_offset;
 	add_timer(&tp->timer);
diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h
index 8c8b987d1250..0e29b885d449 100644
--- a/drivers/net/tg3.h
+++ b/drivers/net/tg3.h
@@ -2215,6 +2215,7 @@ struct tg3 {
 #define TG3_FLG2_HW_TSO_2		0x08000000
 #define TG3_FLG2_HW_TSO			(TG3_FLG2_HW_TSO_1 | TG3_FLG2_HW_TSO_2)
 #define TG3_FLG2_1SHOT_MSI		0x10000000
+#define TG3_FLG2_PHY_JITTER_BUG		0x20000000
 
 	u32				split_mode_max_reqs;
 #define SPLIT_MODE_5704_MAX_REQ		3
diff --git a/drivers/net/tulip/winbond-840.c b/drivers/net/tulip/winbond-840.c
index ba05dedf29d3..136a70c4d5e4 100644
--- a/drivers/net/tulip/winbond-840.c
+++ b/drivers/net/tulip/winbond-840.c
@@ -850,7 +850,7 @@ static void init_rxtx_rings(struct net_device *dev)
 			break;
 		skb->dev = dev;			/* Mark as being used by this device. */
 		np->rx_addr[i] = pci_map_single(np->pci_dev,skb->data,
-					skb->len,PCI_DMA_FROMDEVICE);
+					np->rx_buf_sz,PCI_DMA_FROMDEVICE);
 
 		np->rx_ring[i].buffer1 = np->rx_addr[i];
 		np->rx_ring[i].status = DescOwn;
@@ -1316,7 +1316,7 @@ static int netdev_rx(struct net_device *dev)
 			skb->dev = dev;			/* Mark as being used by this device. */
 			np->rx_addr[entry] = pci_map_single(np->pci_dev,
 							skb->data,
-							skb->len, PCI_DMA_FROMDEVICE);
+							np->rx_buf_sz, PCI_DMA_FROMDEVICE);
 			np->rx_ring[entry].buffer1 = np->rx_addr[entry];
 		}
 		wmb();
diff --git a/drivers/net/via-rhine.c b/drivers/net/via-rhine.c
index 6a23964c1317..fdc21037f6dc 100644
--- a/drivers/net/via-rhine.c
+++ b/drivers/net/via-rhine.c
@@ -129,6 +129,7 @@
 	- Massive clean-up
 	- Rewrite PHY, media handling (remove options, full_duplex, backoff)
 	- Fix Tx engine race for good
+	- Craig Brind: Zero padded aligned buffers for short packets.
 
 */
 
@@ -490,8 +491,6 @@ struct rhine_private {
 	u8 tx_thresh, rx_thresh;
 
 	struct mii_if_info mii_if;
-	struct work_struct tx_timeout_task;
-	struct work_struct check_media_task;
 	void __iomem *base;
 };
 
@@ -499,8 +498,6 @@ static int  mdio_read(struct net_device *dev, int phy_id, int location);
 static void mdio_write(struct net_device *dev, int phy_id, int location, int value);
 static int  rhine_open(struct net_device *dev);
 static void rhine_tx_timeout(struct net_device *dev);
-static void rhine_tx_timeout_task(struct net_device *dev);
-static void rhine_check_media_task(struct net_device *dev);
 static int  rhine_start_tx(struct sk_buff *skb, struct net_device *dev);
 static irqreturn_t rhine_interrupt(int irq, void *dev_instance, struct pt_regs *regs);
 static void rhine_tx(struct net_device *dev);
@@ -855,12 +852,6 @@ static int __devinit rhine_init_one(struct pci_dev *pdev,
 	if (rp->quirks & rqRhineI)
 		dev->features |= NETIF_F_SG|NETIF_F_HW_CSUM;
 
-	INIT_WORK(&rp->tx_timeout_task,
-		  (void (*)(void *))rhine_tx_timeout_task, dev);
-
-	INIT_WORK(&rp->check_media_task,
-		  (void (*)(void *))rhine_check_media_task, dev);
-
 	/* dev->name not defined before register_netdev()! */
 	rc = register_netdev(dev);
 	if (rc)
@@ -1107,11 +1098,6 @@ static void rhine_set_carrier(struct mii_if_info *mii)
 		       netif_carrier_ok(mii->dev));
 }
 
-static void rhine_check_media_task(struct net_device *dev)
-{
-	rhine_check_media(dev, 0);
-}
-
 static void init_registers(struct net_device *dev)
 {
 	struct rhine_private *rp = netdev_priv(dev);
@@ -1165,8 +1151,8 @@ static void rhine_disable_linkmon(void __iomem *ioaddr, u32 quirks)
 	if (quirks & rqRhineI) {
 		iowrite8(0x01, ioaddr + MIIRegAddr);	// MII_BMSR
 
-		/* Do not call from ISR! */
-		msleep(1);
+		/* Can be called from ISR. Evil. */
+		mdelay(1);
 
 		/* 0x80 must be set immediately before turning it off */
 		iowrite8(0x80, ioaddr + MIICmd);
@@ -1256,16 +1242,6 @@ static int rhine_open(struct net_device *dev)
 static void rhine_tx_timeout(struct net_device *dev)
 {
 	struct rhine_private *rp = netdev_priv(dev);
-
-	/*
-	 * Move bulk of work outside of interrupt context
-	 */
-	schedule_work(&rp->tx_timeout_task);
-}
-
-static void rhine_tx_timeout_task(struct net_device *dev)
-{
-	struct rhine_private *rp = netdev_priv(dev);
 	void __iomem *ioaddr = rp->base;
 
 	printk(KERN_WARNING "%s: Transmit timed out, status %4.4x, PHY status "
@@ -1326,7 +1302,12 @@ static int rhine_start_tx(struct sk_buff *skb, struct net_device *dev)
 			rp->stats.tx_dropped++;
 			return 0;
 		}
+
+		/* Padding is not copied and so must be redone. */
 		skb_copy_and_csum_dev(skb, rp->tx_buf[entry]);
+		if (skb->len < ETH_ZLEN)
+			memset(rp->tx_buf[entry] + skb->len, 0,
+			       ETH_ZLEN - skb->len);
 		rp->tx_skbuff_dma[entry] = 0;
 		rp->tx_ring[entry].addr = cpu_to_le32(rp->tx_bufs_dma +
 						      (rp->tx_buf[entry] -
@@ -1671,7 +1652,7 @@ static void rhine_error(struct net_device *dev, int intr_status)
 	spin_lock(&rp->lock);
 
 	if (intr_status & IntrLinkChange)
-		schedule_work(&rp->check_media_task);
+		rhine_check_media(dev, 0);
 	if (intr_status & IntrStatsMax) {
 		rp->stats.rx_crc_errors += ioread16(ioaddr + RxCRCErrs);
 		rp->stats.rx_missed_errors += ioread16(ioaddr + RxMissed);
@@ -1921,9 +1902,6 @@ static int rhine_close(struct net_device *dev)
 	spin_unlock_irq(&rp->lock);
 
 	free_irq(rp->pdev->irq, dev);
-
-	flush_scheduled_work();
-
 	free_rbufs(dev);
 	free_tbufs(dev);
 	free_ring(dev);
diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
index bad09ebdb50b..e0874cbfefea 100644
--- a/drivers/net/wireless/Kconfig
+++ b/drivers/net/wireless/Kconfig
@@ -6,7 +6,7 @@ menu "Wireless LAN (non-hamradio)"
 	depends on NETDEVICES
 
 config NET_RADIO
-	bool "Wireless LAN drivers (non-hamradio)"
+	bool "Wireless LAN drivers (non-hamradio) & Wireless Extensions"
 	select WIRELESS_EXT
 	---help---
 	  Support for wireless LANs and everything having to do with radio,
diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c
index 108d9fed8f07..00764ddd74d8 100644
--- a/drivers/net/wireless/airo.c
+++ b/drivers/net/wireless/airo.c
@@ -3139,6 +3139,7 @@ static irqreturn_t airo_interrupt ( int irq, void* dev_id, struct pt_regs *regs)
 		}
 		if ( status & EV_LINK ) {
 			union iwreq_data	wrqu;
+			int scan_forceloss = 0;
 			/* The link status has changed, if you want to put a
 			   monitor hook in, do it here.  (Remember that
 			   interrupts are still disabled!)
@@ -3157,7 +3158,8 @@ static irqreturn_t airo_interrupt ( int irq, void* dev_id, struct pt_regs *regs)
 			  code) */
 #define AUTHFAIL 0x0300 /* Authentication failure (low byte is reason
 			   code) */
-#define ASSOCIATED 0x0400 /* Assocatied */
+#define ASSOCIATED 0x0400 /* Associated */
+#define REASSOCIATED 0x0600 /* Reassociated?  Only on firmware >= 5.30.17 */
 #define RC_RESERVED 0 /* Reserved return code */
 #define RC_NOREASON 1 /* Unspecified reason */
 #define RC_AUTHINV 2 /* Previous authentication invalid */
@@ -3174,44 +3176,30 @@ static irqreturn_t airo_interrupt ( int irq, void* dev_id, struct pt_regs *regs)
 			  leaving BSS */
 #define RC_NOAUTH 9 /* Station requesting (Re)Association is not
 		       Authenticated with the responding station */
-			if (newStatus != ASSOCIATED) {
-				if (auto_wep && !apriv->expires) {
-					apriv->expires = RUN_AT(3*HZ);
-					wake_up_interruptible(&apriv->thr_wait);
-				}
-			} else {
-				struct task_struct *task = apriv->task;
+			if (newStatus == FORCELOSS && apriv->scan_timeout > 0)
+				scan_forceloss = 1;
+			if(newStatus == ASSOCIATED || newStatus == REASSOCIATED) {
 				if (auto_wep)
 					apriv->expires = 0;
-				if (task)
-					wake_up_process (task);
+				if (apriv->task)
+					wake_up_process (apriv->task);
 				set_bit(FLAG_UPDATE_UNI, &apriv->flags);
 				set_bit(FLAG_UPDATE_MULTI, &apriv->flags);
-			}
-			/* Question : is ASSOCIATED the only status
-			 * that is valid ? We want to catch handover
-			 * and reassociations as valid status
-			 * Jean II */
-			if(newStatus == ASSOCIATED) {
-#if 0
-				/* FIXME: Grabbing scan results here
-				 * seems to be too early???  Just wait for
-				 * timeout instead. */
-				if (apriv->scan_timeout > 0) {
-					set_bit(JOB_SCAN_RESULTS, &apriv->flags);
-					wake_up_interruptible(&apriv->thr_wait);
-				}
-#endif
+
 				if (down_trylock(&apriv->sem) != 0) {
 					set_bit(JOB_EVENT, &apriv->flags);
 					wake_up_interruptible(&apriv->thr_wait);
 				} else
 					airo_send_event(dev);
-			} else {
-				memset(wrqu.ap_addr.sa_data, '\0', ETH_ALEN);
-				wrqu.ap_addr.sa_family = ARPHRD_ETHER;
+			} else if (!scan_forceloss) {
+				if (auto_wep && !apriv->expires) {
+					apriv->expires = RUN_AT(3*HZ);
+					wake_up_interruptible(&apriv->thr_wait);
+				}
 
 				/* Send event to user space */
+				memset(wrqu.ap_addr.sa_data, '\0', ETH_ALEN);
+				wrqu.ap_addr.sa_family = ARPHRD_ETHER;
 				wireless_send_event(dev, SIOCGIWAP, &wrqu,NULL);
 			}
 		}
@@ -7136,10 +7124,10 @@ static int airo_set_scan(struct net_device *dev,
 		goto out;
 
 	/* Initiate a scan command */
+	ai->scan_timeout = RUN_AT(3*HZ);
 	memset(&cmd, 0, sizeof(cmd));
 	cmd.cmd=CMD_LISTBSS;
 	issuecommand(ai, &cmd, &rsp);
-	ai->scan_timeout = RUN_AT(3*HZ);
 	wake = 1;
 
 out:
diff --git a/drivers/net/wireless/arlan-main.c b/drivers/net/wireless/arlan-main.c
index 0e1ac338cac1..bed6823d9809 100644
--- a/drivers/net/wireless/arlan-main.c
+++ b/drivers/net/wireless/arlan-main.c
@@ -1838,7 +1838,7 @@ struct net_device * __init arlan_probe(int unit)
 }
 
 #ifdef  MODULE
-int init_module(void)
+int __init init_module(void)
 {
 	int i = 0;
 
@@ -1860,7 +1860,7 @@ int init_module(void)
 }
 
 
-void cleanup_module(void)
+void __exit cleanup_module(void)
 {
 	int i = 0;
 	struct net_device *dev;
diff --git a/drivers/net/wireless/atmel.c b/drivers/net/wireless/atmel.c
index 87afa6878f26..8606c88886fc 100644
--- a/drivers/net/wireless/atmel.c
+++ b/drivers/net/wireless/atmel.c
@@ -3463,6 +3463,7 @@ static void atmel_command_irq(struct atmel_private *priv)
 	u8 status = atmel_rmem8(priv, atmel_co(priv, CMD_BLOCK_STATUS_OFFSET));
 	u8 command = atmel_rmem8(priv, atmel_co(priv, CMD_BLOCK_COMMAND_OFFSET));
 	int fast_scan;
+	union iwreq_data wrqu;
 
 	if (status == CMD_STATUS_IDLE ||
 	    status == CMD_STATUS_IN_PROGRESS)
@@ -3487,6 +3488,7 @@ static void atmel_command_irq(struct atmel_private *priv)
 			atmel_scan(priv, 1);
 		} else {
 			int bss_index = retrieve_bss(priv);
+			int notify_scan_complete = 1;
 			if (bss_index != -1) {
 				atmel_join_bss(priv, bss_index);
 			} else if (priv->operating_mode == IW_MODE_ADHOC &&
@@ -3495,8 +3497,14 @@ static void atmel_command_irq(struct atmel_private *priv)
 			} else {
 				priv->fast_scan = !fast_scan;
 				atmel_scan(priv, 1);
+				notify_scan_complete = 0;
 			}
 			priv->site_survey_state = SITE_SURVEY_COMPLETED;
+			if (notify_scan_complete) {
+				wrqu.data.length = 0;
+				wrqu.data.flags = 0;
+				wireless_send_event(priv->dev, SIOCGIWSCAN, &wrqu, NULL);
+			}
 		}
 		break;
 
@@ -3509,6 +3517,9 @@ static void atmel_command_irq(struct atmel_private *priv)
 		priv->site_survey_state = SITE_SURVEY_COMPLETED;
 		if (priv->station_is_associated) {
 			atmel_enter_state(priv, STATION_STATE_READY);
+			wrqu.data.length = 0;
+			wrqu.data.flags = 0;
+			wireless_send_event(priv->dev, SIOCGIWSCAN, &wrqu, NULL);
 		} else {
 			atmel_scan(priv, 1);
 		}
diff --git a/drivers/net/wireless/bcm43xx/Kconfig b/drivers/net/wireless/bcm43xx/Kconfig
index 418465600a77..25ea4748f0b9 100644
--- a/drivers/net/wireless/bcm43xx/Kconfig
+++ b/drivers/net/wireless/bcm43xx/Kconfig
@@ -17,8 +17,11 @@ config BCM43XX_DEBUG
 
 config BCM43XX_DMA
 	bool
+	depends on BCM43XX
+
 config BCM43XX_PIO
 	bool
+	depends on BCM43XX
 
 choice
 	prompt "BCM43xx data transfer mode"
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx.h b/drivers/net/wireless/bcm43xx/bcm43xx.h
index dcadd295de4f..2e83083935e1 100644
--- a/drivers/net/wireless/bcm43xx/bcm43xx.h
+++ b/drivers/net/wireless/bcm43xx/bcm43xx.h
@@ -15,7 +15,6 @@
 
 #include "bcm43xx_debugfs.h"
 #include "bcm43xx_leds.h"
-#include "bcm43xx_sysfs.h"
 
 
 #define PFX				KBUILD_MODNAME ": "
@@ -638,8 +637,6 @@ struct bcm43xx_key {
 };
 
 struct bcm43xx_private {
-	struct bcm43xx_sysfs sysfs;
-
 	struct ieee80211_device *ieee;
 	struct ieee80211softmac_device *softmac;
 
@@ -772,6 +769,20 @@ struct bcm43xx_private * bcm43xx_priv(struct net_device *dev)
 	return ieee80211softmac_priv(dev);
 }
 
+struct device;
+
+static inline
+struct bcm43xx_private * dev_to_bcm(struct device *dev)
+{
+	struct net_device *net_dev;
+	struct bcm43xx_private *bcm;
+
+	net_dev = dev_get_drvdata(dev);
+	bcm = bcm43xx_priv(net_dev);
+
+	return bcm;
+}
+
 
 /* Helper function, which returns a boolean.
  * TRUE, if PIO is used; FALSE, if DMA is used.
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_debugfs.c b/drivers/net/wireless/bcm43xx/bcm43xx_debugfs.c
index d2c3401e9b70..35a4fcb6d923 100644
--- a/drivers/net/wireless/bcm43xx/bcm43xx_debugfs.c
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_debugfs.c
@@ -452,12 +452,12 @@ void bcm43xx_printk_dump(const char *data,
 	size_t i;
 	char c;
 
-	printk(KERN_INFO PFX "Data dump (%s, %u bytes):",
+	printk(KERN_INFO PFX "Data dump (%s, %zd bytes):",
 	       description, size);
 	for (i = 0; i < size; i++) {
 		c = data[i];
 		if (i % 8 == 0)
-			printk("\n" KERN_INFO PFX "0x%08x:  0x%02x, ", i, c & 0xff);
+			printk("\n" KERN_INFO PFX "0x%08zx:  0x%02x, ", i, c & 0xff);
 		else
 			printk("0x%02x, ", c & 0xff);
 	}
@@ -472,12 +472,12 @@ void bcm43xx_printk_bitdump(const unsigned char *data,
 	int j;
 	const unsigned char *d;
 
-	printk(KERN_INFO PFX "*** Bitdump (%s, %u bytes, %s) ***",
+	printk(KERN_INFO PFX "*** Bitdump (%s, %zd bytes, %s) ***",
 	       description, bytes, msb_to_lsb ? "MSB to LSB" : "LSB to MSB");
 	for (i = 0; i < bytes; i++) {
 		d = data + i;
 		if (i % 8 == 0)
-			printk("\n" KERN_INFO PFX "0x%08x:  ", i);
+			printk("\n" KERN_INFO PFX "0x%08zx:  ", i);
 		if (msb_to_lsb) {
 			for (j = 7; j >= 0; j--) {
 				if (*d & (1 << j))
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_dma.c b/drivers/net/wireless/bcm43xx/bcm43xx_dma.c
index c3681b8f09b4..d0318e525ba7 100644
--- a/drivers/net/wireless/bcm43xx/bcm43xx_dma.c
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_dma.c
@@ -196,8 +196,9 @@ static int alloc_ringmemory(struct bcm43xx_dmaring *ring)
 	}
 	if (ring->dmabase + BCM43xx_DMA_RINGMEMSIZE > BCM43xx_DMA_BUSADDRMAX) {
 		printk(KERN_ERR PFX ">>>FATAL ERROR<<<  DMA RINGMEMORY >1G "
-				    "(0x%08x, len: %lu)\n",
-		       ring->dmabase, BCM43xx_DMA_RINGMEMSIZE);
+				    "(0x%llx, len: %lu)\n",
+				(unsigned long long)ring->dmabase,
+				BCM43xx_DMA_RINGMEMSIZE);
 		dma_free_coherent(dev, BCM43xx_DMA_RINGMEMSIZE,
 				  ring->vbase, ring->dmabase);
 		return -ENOMEM;
@@ -307,8 +308,8 @@ static int setup_rx_descbuffer(struct bcm43xx_dmaring *ring,
 		unmap_descbuffer(ring, dmaaddr, ring->rx_buffersize, 0);
 		dev_kfree_skb_any(skb);
 		printk(KERN_ERR PFX ">>>FATAL ERROR<<<  DMA RX SKB >1G "
-				    "(0x%08x, len: %u)\n",
-		       dmaaddr, ring->rx_buffersize);
+				    "(0x%llx, len: %u)\n",
+			(unsigned long long)dmaaddr, ring->rx_buffersize);
 		return -ENOMEM;
 	}
 	meta->skb = skb;
@@ -623,25 +624,28 @@ err_destroy_tx0:
 static u16 generate_cookie(struct bcm43xx_dmaring *ring,
 			   int slot)
 {
-	u16 cookie = 0x0000;
+	u16 cookie = 0xF000;
 
 	/* Use the upper 4 bits of the cookie as
 	 * DMA controller ID and store the slot number
-	 * in the lower 12 bits
+	 * in the lower 12 bits.
+	 * Note that the cookie must never be 0, as this
+	 * is a special value used in RX path.
 	 */
 	switch (ring->mmio_base) {
 	default:
 		assert(0);
 	case BCM43xx_MMIO_DMA1_BASE:
+		cookie = 0xA000;
 		break;
 	case BCM43xx_MMIO_DMA2_BASE:
-		cookie = 0x1000;
+		cookie = 0xB000;
 		break;
 	case BCM43xx_MMIO_DMA3_BASE:
-		cookie = 0x2000;
+		cookie = 0xC000;
 		break;
 	case BCM43xx_MMIO_DMA4_BASE:
-		cookie = 0x3000;
+		cookie = 0xD000;
 		break;
 	}
 	assert(((u16)slot & 0xF000) == 0x0000);
@@ -659,16 +663,16 @@ struct bcm43xx_dmaring * parse_cookie(struct bcm43xx_private *bcm,
 	struct bcm43xx_dmaring *ring = NULL;
 
 	switch (cookie & 0xF000) {
-	case 0x0000:
+	case 0xA000:
 		ring = dma->tx_ring0;
 		break;
-	case 0x1000:
+	case 0xB000:
 		ring = dma->tx_ring1;
 		break;
-	case 0x2000:
+	case 0xC000:
 		ring = dma->tx_ring2;
 		break;
-	case 0x3000:
+	case 0xD000:
 		ring = dma->tx_ring3;
 		break;
 	default:
@@ -729,8 +733,8 @@ static int dma_tx_fragment(struct bcm43xx_dmaring *ring,
 	if (unlikely(meta->dmaaddr + skb->len > BCM43xx_DMA_BUSADDRMAX)) {
 		return_slot(ring, slot);
 		printk(KERN_ERR PFX ">>>FATAL ERROR<<<  DMA TX SKB >1G "
-				    "(0x%08x, len: %u)\n",
-		       meta->dmaaddr, skb->len);
+				    "(0x%llx, len: %u)\n",
+			(unsigned long long)meta->dmaaddr, skb->len);
 		return -ENOMEM;
 	}
 
@@ -838,8 +842,18 @@ static void dma_rx(struct bcm43xx_dmaring *ring,
 		/* We received an xmit status. */
 		struct bcm43xx_hwxmitstatus *hw = (struct bcm43xx_hwxmitstatus *)skb->data;
 		struct bcm43xx_xmitstatus stat;
+		int i = 0;
 
 		stat.cookie = le16_to_cpu(hw->cookie);
+		while (stat.cookie == 0) {
+			if (unlikely(++i >= 10000)) {
+				assert(0);
+				break;
+			}
+			udelay(2);
+			barrier();
+			stat.cookie = le16_to_cpu(hw->cookie);
+		}
 		stat.flags = hw->flags;
 		stat.cnt1 = hw->cnt1;
 		stat.cnt2 = hw->cnt2;
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_dma.h b/drivers/net/wireless/bcm43xx/bcm43xx_dma.h
index 2d520e4b0276..b7d77638ba8c 100644
--- a/drivers/net/wireless/bcm43xx/bcm43xx_dma.h
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_dma.h
@@ -213,6 +213,14 @@ static inline
 void bcm43xx_dma_rx(struct bcm43xx_dmaring *ring)
 {
 }
+static inline
+void bcm43xx_dma_tx_suspend(struct bcm43xx_dmaring *ring)
+{
+}
+static inline
+void bcm43xx_dma_tx_resume(struct bcm43xx_dmaring *ring)
+{
+}
 
 #endif /* CONFIG_BCM43XX_DMA */
 #endif /* BCM43xx_DMA_H_ */
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_main.c b/drivers/net/wireless/bcm43xx/bcm43xx_main.c
index c37371fc9e01..7ed18cad29f7 100644
--- a/drivers/net/wireless/bcm43xx/bcm43xx_main.c
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_main.c
@@ -52,6 +52,7 @@
 #include "bcm43xx_wx.h"
 #include "bcm43xx_ethtool.h"
 #include "bcm43xx_xmit.h"
+#include "bcm43xx_sysfs.h"
 
 
 MODULE_DESCRIPTION("Broadcom BCM43xx wireless driver");
@@ -938,9 +939,9 @@ static int bcm43xx_sprom_extract(struct bcm43xx_private *bcm)
 	return 0;
 }
 
-static void bcm43xx_geo_init(struct bcm43xx_private *bcm)
+static int bcm43xx_geo_init(struct bcm43xx_private *bcm)
 {
-	struct ieee80211_geo geo;
+	struct ieee80211_geo *geo;
 	struct ieee80211_channel *chan;
 	int have_a = 0, have_bg = 0;
 	int i;
@@ -948,7 +949,10 @@ static void bcm43xx_geo_init(struct bcm43xx_private *bcm)
 	struct bcm43xx_phyinfo *phy;
 	const char *iso_country;
 
-	memset(&geo, 0, sizeof(geo));
+	geo = kzalloc(sizeof(*geo), GFP_KERNEL);
+	if (!geo)
+		return -ENOMEM;
+
 	for (i = 0; i < bcm->nr_80211_available; i++) {
 		phy = &(bcm->core_80211_ext[i].phy);
 		switch (phy->type) {
@@ -966,31 +970,36 @@ static void bcm43xx_geo_init(struct bcm43xx_private *bcm)
 	iso_country = bcm43xx_locale_iso(bcm->sprom.locale);
 
  	if (have_a) {
-		for (i = 0, channel = 0; channel < 201; channel++) {
-			chan = &geo.a[i++];
+		for (i = 0, channel = IEEE80211_52GHZ_MIN_CHANNEL;
+		      channel <= IEEE80211_52GHZ_MAX_CHANNEL; channel++) {
+			chan = &geo->a[i++];
 			chan->freq = bcm43xx_channel_to_freq_a(channel);
 			chan->channel = channel;
 		}
-		geo.a_channels = i;
+		geo->a_channels = i;
 	}
 	if (have_bg) {
-		for (i = 0, channel = 1; channel < 15; channel++) {
-			chan = &geo.bg[i++];
+		for (i = 0, channel = IEEE80211_24GHZ_MIN_CHANNEL;
+		      channel <= IEEE80211_24GHZ_MAX_CHANNEL; channel++) {
+			chan = &geo->bg[i++];
 			chan->freq = bcm43xx_channel_to_freq_bg(channel);
 			chan->channel = channel;
 		}
-		geo.bg_channels = i;
+		geo->bg_channels = i;
 	}
-	memcpy(geo.name, iso_country, 2);
+	memcpy(geo->name, iso_country, 2);
 	if (0 /*TODO: Outdoor use only */)
-		geo.name[2] = 'O';
+		geo->name[2] = 'O';
 	else if (0 /*TODO: Indoor use only */)
-		geo.name[2] = 'I';
+		geo->name[2] = 'I';
 	else
-		geo.name[2] = ' ';
-	geo.name[3] = '\0';
+		geo->name[2] = ' ';
+	geo->name[3] = '\0';
+
+	ieee80211_set_geo(bcm->ieee, geo);
+	kfree(geo);
 
-	ieee80211_set_geo(bcm->ieee, &geo);
+	return 0;
 }
 
 /* DummyTransmission function, as documented on 
@@ -3262,6 +3271,9 @@ static int bcm43xx_init_board(struct bcm43xx_private *bcm)
 	bcm43xx_sysfs_register(bcm);
 	//FIXME: check for bcm43xx_sysfs_register failure. This function is a bit messy regarding unwinding, though...
 
+	/*FIXME: This should be handled by softmac instead. */
+	schedule_work(&bcm->softmac->associnfo.work);
+
 	assert(err == 0);
 out:
 	return err;
@@ -3478,16 +3490,17 @@ static int bcm43xx_attach_board(struct bcm43xx_private *bcm)
 			goto err_80211_unwind;
 		bcm43xx_wireless_core_disable(bcm);
 	}
+	err = bcm43xx_geo_init(bcm);
+	if (err)
+		goto err_80211_unwind;
 	bcm43xx_pctl_set_crystal(bcm, 0);
 
 	/* Set the MAC address in the networking subsystem */
-	if (bcm43xx_current_phy(bcm)->type == BCM43xx_PHYTYPE_A)
+	if (is_valid_ether_addr(bcm->sprom.et1macaddr))
 		memcpy(bcm->net_dev->dev_addr, bcm->sprom.et1macaddr, 6);
 	else
 		memcpy(bcm->net_dev->dev_addr, bcm->sprom.il0macaddr, 6);
 
-	bcm43xx_geo_init(bcm);
-
 	snprintf(bcm->nick, IW_ESSID_MAX_SIZE,
 		 "Broadcom %04X", bcm->chip_id);
 
@@ -3522,6 +3535,7 @@ static inline int bcm43xx_tx(struct bcm43xx_private *bcm,
 		err = bcm43xx_pio_tx(bcm, txb);
 	else
 		err = bcm43xx_dma_tx(bcm, txb);
+	bcm->net_dev->trans_start = jiffies;
 
 	return err;
 }
@@ -3935,9 +3949,6 @@ static int bcm43xx_resume(struct pci_dev *pdev)
 
 	netif_device_attach(net_dev);
 	
-	/*FIXME: This should be handled by softmac instead. */
-	schedule_work(&bcm->softmac->associnfo.work);
-
 	dprintk(KERN_INFO PFX "Device resumed.\n");
 
 	return 0;
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_main.h b/drivers/net/wireless/bcm43xx/bcm43xx_main.h
index eca79a38594a..30a202b258b5 100644
--- a/drivers/net/wireless/bcm43xx/bcm43xx_main.h
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_main.h
@@ -118,12 +118,14 @@ int bcm43xx_channel_to_freq(struct bcm43xx_private *bcm,
 static inline
 int bcm43xx_is_valid_channel_a(u8 channel)
 {
-	return (channel <= 200);
+	return (channel >= IEEE80211_52GHZ_MIN_CHANNEL
+	       && channel <= IEEE80211_52GHZ_MAX_CHANNEL);
 }
 static inline
 int bcm43xx_is_valid_channel_bg(u8 channel)
 {
-	return (channel >= 1 && channel <= 14);
+	return (channel >= IEEE80211_24GHZ_MIN_CHANNEL
+	       && channel <= IEEE80211_24GHZ_MAX_CHANNEL);
 }
 static inline
 int bcm43xx_is_valid_channel(struct bcm43xx_private *bcm,
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_phy.c b/drivers/net/wireless/bcm43xx/bcm43xx_phy.c
index 0a66f43ca0c0..b0abac515530 100644
--- a/drivers/net/wireless/bcm43xx/bcm43xx_phy.c
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_phy.c
@@ -1287,7 +1287,7 @@ static void bcm43xx_phy_initg(struct bcm43xx_private *bcm)
 	if (radio->revision == 8)
 		bcm43xx_phy_write(bcm, 0x0805, 0x3230);
 	bcm43xx_phy_init_pctl(bcm);
-	if (bcm->chip_id == 0x4306 && bcm->chip_package != 2) {
+	if (bcm->chip_id == 0x4306 && bcm->chip_package == 2) {
 		bcm43xx_phy_write(bcm, 0x0429,
 				  bcm43xx_phy_read(bcm, 0x0429) & 0xBFFF);
 		bcm43xx_phy_write(bcm, 0x04C3,
@@ -2151,6 +2151,7 @@ int bcm43xx_phy_init_tssi2dbm_table(struct bcm43xx_private *bcm)
 				phy->tssi2dbm = NULL;
 				printk(KERN_ERR PFX "Could not generate "
 						    "tssi2dBm table\n");
+				kfree(dyn_tssi2dbm);
 				return -ENODEV;
 			}
 		phy->tssi2dbm = dyn_tssi2dbm;
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_pio.c b/drivers/net/wireless/bcm43xx/bcm43xx_pio.c
index c59ddd40680d..0aa1bd269a25 100644
--- a/drivers/net/wireless/bcm43xx/bcm43xx_pio.c
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_pio.c
@@ -27,6 +27,7 @@
 #include "bcm43xx_pio.h"
 #include "bcm43xx_main.h"
 #include "bcm43xx_xmit.h"
+#include "bcm43xx_power.h"
 
 #include <linux/delay.h>
 
@@ -44,10 +45,10 @@ static void tx_octet(struct bcm43xx_pioqueue *queue,
 		bcm43xx_pio_write(queue, BCM43xx_PIO_TXDATA,
 				  octet);
 		bcm43xx_pio_write(queue, BCM43xx_PIO_TXCTL,
-				  BCM43xx_PIO_TXCTL_WRITEHI);
+				  BCM43xx_PIO_TXCTL_WRITELO);
 	} else {
 		bcm43xx_pio_write(queue, BCM43xx_PIO_TXCTL,
-				  BCM43xx_PIO_TXCTL_WRITEHI);
+				  BCM43xx_PIO_TXCTL_WRITELO);
 		bcm43xx_pio_write(queue, BCM43xx_PIO_TXDATA,
 				  octet);
 	}
@@ -103,7 +104,7 @@ static void tx_complete(struct bcm43xx_pioqueue *queue,
 		bcm43xx_pio_write(queue, BCM43xx_PIO_TXDATA,
 				  skb->data[skb->len - 1]);
 		bcm43xx_pio_write(queue, BCM43xx_PIO_TXCTL,
-				  BCM43xx_PIO_TXCTL_WRITEHI |
+				  BCM43xx_PIO_TXCTL_WRITELO |
 				  BCM43xx_PIO_TXCTL_COMPLETE);
 	} else {
 		bcm43xx_pio_write(queue, BCM43xx_PIO_TXCTL,
@@ -112,9 +113,10 @@ static void tx_complete(struct bcm43xx_pioqueue *queue,
 }
 
 static u16 generate_cookie(struct bcm43xx_pioqueue *queue,
-			   int packetindex)
+			   struct bcm43xx_pio_txpacket *packet)
 {
 	u16 cookie = 0x0000;
+	int packetindex;
 
 	/* We use the upper 4 bits for the PIO
 	 * controller ID and the lower 12 bits
@@ -135,6 +137,7 @@ static u16 generate_cookie(struct bcm43xx_pioqueue *queue,
 	default:
 		assert(0);
 	}
+	packetindex = pio_txpacket_getindex(packet);
 	assert(((u16)packetindex & 0xF000) == 0x0000);
 	cookie |= (u16)packetindex;
 
@@ -184,7 +187,7 @@ static void pio_tx_write_fragment(struct bcm43xx_pioqueue *queue,
 	bcm43xx_generate_txhdr(queue->bcm,
 			       &txhdr, skb->data, skb->len,
 			       (packet->xmitted_frags == 0),
-			       generate_cookie(queue, pio_txpacket_getindex(packet)));
+			       generate_cookie(queue, packet));
 
 	tx_start(queue);
 	octets = skb->len + sizeof(txhdr);
@@ -241,7 +244,7 @@ static int pio_tx_packet(struct bcm43xx_pio_txpacket *packet)
 		queue->tx_devq_packets++;
 		queue->tx_devq_used += octets;
 
-		assert(packet->xmitted_frags <= packet->txb->nr_frags);
+		assert(packet->xmitted_frags < packet->txb->nr_frags);
 		packet->xmitted_frags++;
 		packet->xmitted_octets += octets;
 	}
@@ -257,8 +260,14 @@ static void tx_tasklet(unsigned long d)
 	unsigned long flags;
 	struct bcm43xx_pio_txpacket *packet, *tmp_packet;
 	int err;
+	u16 txctl;
 
 	bcm43xx_lock_mmio(bcm, flags);
+
+	txctl = bcm43xx_pio_read(queue, BCM43xx_PIO_TXCTL);
+	if (txctl & BCM43xx_PIO_TXCTL_SUSPEND)
+		goto out_unlock;
+
 	list_for_each_entry_safe(packet, tmp_packet, &queue->txqueue, list) {
 		assert(packet->xmitted_frags < packet->txb->nr_frags);
 		if (packet->xmitted_frags == 0) {
@@ -288,6 +297,7 @@ static void tx_tasklet(unsigned long d)
 	next_packet:
 		continue;
 	}
+out_unlock:
 	bcm43xx_unlock_mmio(bcm, flags);
 }
 
@@ -330,12 +340,19 @@ struct bcm43xx_pioqueue * bcm43xx_setup_pioqueue(struct bcm43xx_private *bcm,
 		     (unsigned long)queue);
 
 	value = bcm43xx_read32(bcm, BCM43xx_MMIO_STATUS_BITFIELD);
-	value |= BCM43xx_SBF_XFER_REG_BYTESWAP;
+	value &= ~BCM43xx_SBF_XFER_REG_BYTESWAP;
 	bcm43xx_write32(bcm, BCM43xx_MMIO_STATUS_BITFIELD, value);
 
 	qsize = bcm43xx_read16(bcm, queue->mmio_base + BCM43xx_PIO_TXQBUFSIZE);
+	if (qsize == 0) {
+		printk(KERN_ERR PFX "ERROR: This card does not support PIO "
+				    "operation mode. Please use DMA mode "
+				    "(module parameter pio=0).\n");
+		goto err_freequeue;
+	}
 	if (qsize <= BCM43xx_PIO_TXQADJUST) {
-		printk(KERN_ERR PFX "PIO tx device-queue too small (%u)\n", qsize);
+		printk(KERN_ERR PFX "PIO tx device-queue too small (%u)\n",
+		       qsize);
 		goto err_freequeue;
 	}
 	qsize -= BCM43xx_PIO_TXQADJUST;
@@ -444,15 +461,10 @@ int bcm43xx_pio_tx(struct bcm43xx_private *bcm,
 {
 	struct bcm43xx_pioqueue *queue = bcm43xx_current_pio(bcm)->queue1;
 	struct bcm43xx_pio_txpacket *packet;
-	u16 tmp;
 
 	assert(!queue->tx_suspended);
 	assert(!list_empty(&queue->txfree));
 
-	tmp = bcm43xx_pio_read(queue, BCM43xx_PIO_TXCTL);
-	if (tmp & BCM43xx_PIO_TXCTL_SUSPEND)
-		return -EBUSY;
-
 	packet = list_entry(queue->txfree.next, struct bcm43xx_pio_txpacket, list);
 	packet->txb = txb;
 	packet->xmitted_frags = 0;
@@ -462,7 +474,7 @@ int bcm43xx_pio_tx(struct bcm43xx_private *bcm,
 	assert(queue->nr_txfree < BCM43xx_PIO_MAXTXPACKETS);
 
 	/* Suspend TX, if we are out of packets in the "free" queue. */
-	if (unlikely(list_empty(&queue->txfree))) {
+	if (list_empty(&queue->txfree)) {
 		netif_stop_queue(queue->bcm->net_dev);
 		queue->tx_suspended = 1;
 	}
@@ -480,15 +492,15 @@ void bcm43xx_pio_handle_xmitstatus(struct bcm43xx_private *bcm,
 
 	queue = parse_cookie(bcm, status->cookie, &packet);
 	assert(queue);
-//TODO
-if (!queue)
-return;
+
 	free_txpacket(packet, 1);
-	if (unlikely(queue->tx_suspended)) {
+	if (queue->tx_suspended) {
 		queue->tx_suspended = 0;
 		netif_wake_queue(queue->bcm->net_dev);
 	}
-	/* If there are packets on the txqueue, poke the tasklet. */
+	/* If there are packets on the txqueue, poke the tasklet
+	 * to transmit them.
+	 */
 	if (!list_empty(&queue->txqueue))
 		tasklet_schedule(&queue->txtask);
 }
@@ -519,12 +531,9 @@ void bcm43xx_pio_rx(struct bcm43xx_pioqueue *queue)
 	int i, preamble_readwords;
 	struct sk_buff *skb;
 
-return;
 	tmp = bcm43xx_pio_read(queue, BCM43xx_PIO_RXCTL);
-	if (!(tmp & BCM43xx_PIO_RXCTL_DATAAVAILABLE)) {
-		dprintkl(KERN_ERR PFX "PIO RX: No data available\n");//TODO: remove this printk.
+	if (!(tmp & BCM43xx_PIO_RXCTL_DATAAVAILABLE))
 		return;
-	}
 	bcm43xx_pio_write(queue, BCM43xx_PIO_RXCTL,
 			  BCM43xx_PIO_RXCTL_DATAAVAILABLE);
 
@@ -538,8 +547,7 @@ return;
 	return;
 data_ready:
 
-//FIXME: endianess in this function.
-	len = le16_to_cpu(bcm43xx_pio_read(queue, BCM43xx_PIO_RXDATA));
+	len = bcm43xx_pio_read(queue, BCM43xx_PIO_RXDATA);
 	if (unlikely(len > 0x700)) {
 		pio_rx_error(queue, 0, "len > 0x700");
 		return;
@@ -555,7 +563,7 @@ data_ready:
 		preamble_readwords = 18 / sizeof(u16);
 	for (i = 0; i < preamble_readwords; i++) {
 		tmp = bcm43xx_pio_read(queue, BCM43xx_PIO_RXDATA);
-		preamble[i + 1] = cpu_to_be16(tmp);//FIXME?
+		preamble[i + 1] = cpu_to_le16(tmp);
 	}
 	rxhdr = (struct bcm43xx_rxhdr *)preamble;
 	rxflags2 = le16_to_cpu(rxhdr->flags2);
@@ -591,16 +599,40 @@ data_ready:
 	}
 	skb_put(skb, len);
 	for (i = 0; i < len - 1; i += 2) {
-		tmp = cpu_to_be16(bcm43xx_pio_read(queue, BCM43xx_PIO_RXDATA));
-		*((u16 *)(skb->data + i)) = tmp;
+		tmp = bcm43xx_pio_read(queue, BCM43xx_PIO_RXDATA);
+		*((u16 *)(skb->data + i)) = cpu_to_le16(tmp);
 	}
 	if (len % 2) {
 		tmp = bcm43xx_pio_read(queue, BCM43xx_PIO_RXDATA);
 		skb->data[len - 1] = (tmp & 0x00FF);
+/* The specs say the following is required, but
+ * it is wrong and corrupts the PLCP. If we don't do
+ * this, the PLCP seems to be correct. So ifdef it out for now.
+ */
+#if 0
 		if (rxflags2 & BCM43xx_RXHDR_FLAGS2_TYPE2FRAME)
-			skb->data[0x20] = (tmp & 0xFF00) >> 8;
+			skb->data[2] = (tmp & 0xFF00) >> 8;
 		else
-			skb->data[0x1E] = (tmp & 0xFF00) >> 8;
+			skb->data[0] = (tmp & 0xFF00) >> 8;
+#endif
 	}
+	skb_trim(skb, len - IEEE80211_FCS_LEN);
 	bcm43xx_rx(queue->bcm, skb, rxhdr);
 }
+
+void bcm43xx_pio_tx_suspend(struct bcm43xx_pioqueue *queue)
+{
+	bcm43xx_power_saving_ctl_bits(queue->bcm, -1, 1);
+	bcm43xx_pio_write(queue, BCM43xx_PIO_TXCTL,
+			  bcm43xx_pio_read(queue, BCM43xx_PIO_TXCTL)
+			  | BCM43xx_PIO_TXCTL_SUSPEND);
+}
+
+void bcm43xx_pio_tx_resume(struct bcm43xx_pioqueue *queue)
+{
+	bcm43xx_pio_write(queue, BCM43xx_PIO_TXCTL,
+			  bcm43xx_pio_read(queue, BCM43xx_PIO_TXCTL)
+			  & ~BCM43xx_PIO_TXCTL_SUSPEND);
+	bcm43xx_power_saving_ctl_bits(queue->bcm, -1, -1);
+	tasklet_schedule(&queue->txtask);
+}
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_pio.h b/drivers/net/wireless/bcm43xx/bcm43xx_pio.h
index 970627bc1769..dfc78209e3a3 100644
--- a/drivers/net/wireless/bcm43xx/bcm43xx_pio.h
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_pio.h
@@ -14,8 +14,8 @@
 #define BCM43xx_PIO_RXCTL		0x08
 #define BCM43xx_PIO_RXDATA		0x0A
 
-#define BCM43xx_PIO_TXCTL_WRITEHI	(1 << 0)
-#define BCM43xx_PIO_TXCTL_WRITELO	(1 << 1)
+#define BCM43xx_PIO_TXCTL_WRITELO	(1 << 0)
+#define BCM43xx_PIO_TXCTL_WRITEHI	(1 << 1)
 #define BCM43xx_PIO_TXCTL_COMPLETE	(1 << 2)
 #define BCM43xx_PIO_TXCTL_INIT		(1 << 3)
 #define BCM43xx_PIO_TXCTL_SUSPEND	(1 << 7)
@@ -95,6 +95,7 @@ void bcm43xx_pio_write(struct bcm43xx_pioqueue *queue,
 		       u16 offset, u16 value)
 {
 	bcm43xx_write16(queue->bcm, queue->mmio_base + offset, value);
+	mmiowb();
 }
 
 
@@ -107,6 +108,9 @@ void bcm43xx_pio_handle_xmitstatus(struct bcm43xx_private *bcm,
 				   struct bcm43xx_xmitstatus *status);
 void bcm43xx_pio_rx(struct bcm43xx_pioqueue *queue);
 
+void bcm43xx_pio_tx_suspend(struct bcm43xx_pioqueue *queue);
+void bcm43xx_pio_tx_resume(struct bcm43xx_pioqueue *queue);
+
 #else /* CONFIG_BCM43XX_PIO */
 
 static inline
@@ -133,6 +137,14 @@ static inline
 void bcm43xx_pio_rx(struct bcm43xx_pioqueue *queue)
 {
 }
+static inline
+void bcm43xx_pio_tx_suspend(struct bcm43xx_pioqueue *queue)
+{
+}
+static inline
+void bcm43xx_pio_tx_resume(struct bcm43xx_pioqueue *queue)
+{
+}
 
 #endif /* CONFIG_BCM43XX_PIO */
 #endif /* BCM43xx_PIO_H_ */
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_power.c b/drivers/net/wireless/bcm43xx/bcm43xx_power.c
index 3c92b62807c5..6569da3a7a39 100644
--- a/drivers/net/wireless/bcm43xx/bcm43xx_power.c
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_power.c
@@ -35,77 +35,101 @@
 #include "bcm43xx_main.h"
 
 
+/* Get the Slow Clock Source */
+static int bcm43xx_pctl_get_slowclksrc(struct bcm43xx_private *bcm)
+{
+	u32 tmp;
+	int err;
+
+	assert(bcm->current_core == &bcm->core_chipcommon);
+	if (bcm->current_core->rev < 6) {
+		if (bcm->bustype == BCM43xx_BUSTYPE_PCMCIA ||
+		    bcm->bustype == BCM43xx_BUSTYPE_SB)
+			return BCM43xx_PCTL_CLKSRC_XTALOS;
+		if (bcm->bustype == BCM43xx_BUSTYPE_PCI) {
+			err = bcm43xx_pci_read_config32(bcm, BCM43xx_PCTL_OUT, &tmp);
+			assert(!err);
+			if (tmp & 0x10)
+				return BCM43xx_PCTL_CLKSRC_PCI;
+			return BCM43xx_PCTL_CLKSRC_XTALOS;
+		}
+	}
+	if (bcm->current_core->rev < 10) {
+		tmp = bcm43xx_read32(bcm, BCM43xx_CHIPCOMMON_SLOWCLKCTL);
+		tmp &= 0x7;
+		if (tmp == 0)
+			return BCM43xx_PCTL_CLKSRC_LOPWROS;
+		if (tmp == 1)
+			return BCM43xx_PCTL_CLKSRC_XTALOS;
+		if (tmp == 2)
+			return BCM43xx_PCTL_CLKSRC_PCI;
+	}
+
+	return BCM43xx_PCTL_CLKSRC_XTALOS;
+}
+
 /* Get max/min slowclock frequency
  * as described in http://bcm-specs.sipsolutions.net/PowerControl
  */
 static int bcm43xx_pctl_clockfreqlimit(struct bcm43xx_private *bcm,
 				       int get_max)
 {
-	int limit = 0;
+	int limit;
+	int clocksrc;
 	int divisor;
-	int selection;
-	int err;
 	u32 tmp;
-	struct bcm43xx_coreinfo *old_core;
 
-	if (!(bcm->chipcommon_capabilities & BCM43xx_CAPABILITIES_PCTL))
-		goto out;
-	old_core = bcm->current_core;
-	err = bcm43xx_switch_core(bcm, &bcm->core_chipcommon);
-	if (err)
-		goto out;
+	assert(bcm->chipcommon_capabilities & BCM43xx_CAPABILITIES_PCTL);
+	assert(bcm->current_core == &bcm->core_chipcommon);
 
+	clocksrc = bcm43xx_pctl_get_slowclksrc(bcm);
 	if (bcm->current_core->rev < 6) {
-		if ((bcm->bustype == BCM43xx_BUSTYPE_PCMCIA) ||
-			(bcm->bustype == BCM43xx_BUSTYPE_SB)) {
-			selection = 1;
+		switch (clocksrc) {
+		case BCM43xx_PCTL_CLKSRC_PCI:
+			divisor = 64;
+			break;
+		case BCM43xx_PCTL_CLKSRC_XTALOS:
 			divisor = 32;
-		} else {
-			err = bcm43xx_pci_read_config32(bcm, BCM43xx_PCTL_OUT, &tmp);
-			if (err) {
-				printk(KERN_ERR PFX "clockfreqlimit pcicfg read failure\n");
-				goto out_switchback;
-			}
-			if (tmp & 0x10) {
-				/* PCI */
-				selection = 2;
-				divisor = 64;
-			} else {
-				/* XTAL */
-				selection = 1;
-				divisor = 32;
-			}
+			break;
+		default:
+			assert(0);
+			divisor = 1;
 		}
 	} else if (bcm->current_core->rev < 10) {
-		selection = (tmp & 0x07);
-		if (selection) {
+		switch (clocksrc) {
+		case BCM43xx_PCTL_CLKSRC_LOPWROS:
+			divisor = 1;
+			break;
+		case BCM43xx_PCTL_CLKSRC_XTALOS:
+		case BCM43xx_PCTL_CLKSRC_PCI:
 			tmp = bcm43xx_read32(bcm, BCM43xx_CHIPCOMMON_SLOWCLKCTL);
-			divisor = 4 * (1 + ((tmp & 0xFFFF0000) >> 16));
-		} else
+			divisor = ((tmp & 0xFFFF0000) >> 16) + 1;
+			divisor *= 4;
+			break;
+		default:
+			assert(0);
 			divisor = 1;
+		}
 	} else {
 		tmp = bcm43xx_read32(bcm, BCM43xx_CHIPCOMMON_SYSCLKCTL);
-		divisor = 4 * (1 + ((tmp & 0xFFFF0000) >> 16));
-		selection = 1;
+		divisor = ((tmp & 0xFFFF0000) >> 16) + 1;
+		divisor *= 4;
 	}
-	
-	switch (selection) {
-	case 0:
-		/* LPO */
+
+	switch (clocksrc) {
+	case BCM43xx_PCTL_CLKSRC_LOPWROS:
 		if (get_max)
 			limit = 43000;
 		else
 			limit = 25000;
 		break;
-	case 1:
-		/* XTAL */
+	case BCM43xx_PCTL_CLKSRC_XTALOS:
 		if (get_max)
 			limit = 20200000;
 		else
 			limit = 19800000;
 		break;
-	case 2:
-		/* PCI */
+	case BCM43xx_PCTL_CLKSRC_PCI:
 		if (get_max)
 			limit = 34000000;
 		else
@@ -113,17 +137,14 @@ static int bcm43xx_pctl_clockfreqlimit(struct bcm43xx_private *bcm,
 		break;
 	default:
 		assert(0);
+		limit = 0;
 	}
 	limit /= divisor;
 
-out_switchback:
-	err = bcm43xx_switch_core(bcm, old_core);
-	assert(err == 0);
-
-out:
 	return limit;
 }
 
+
 /* init power control
  * as described in http://bcm-specs.sipsolutions.net/PowerControl
  */
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_power.h b/drivers/net/wireless/bcm43xx/bcm43xx_power.h
index 5f63640810bd..c966ab3a5a8c 100644
--- a/drivers/net/wireless/bcm43xx/bcm43xx_power.h
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_power.h
@@ -33,6 +33,15 @@
 
 #include <linux/types.h>
 
+/* Clock sources */
+enum {
+	/* PCI clock */
+	BCM43xx_PCTL_CLKSRC_PCI,
+	/* Crystal slow clock oscillator */
+	BCM43xx_PCTL_CLKSRC_XTALOS,
+	/* Low power oscillator */
+	BCM43xx_PCTL_CLKSRC_LOPWROS,
+};
 
 struct bcm43xx_private;
 
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_sysfs.c b/drivers/net/wireless/bcm43xx/bcm43xx_sysfs.c
index c44d890b949b..b438f48e891d 100644
--- a/drivers/net/wireless/bcm43xx/bcm43xx_sysfs.c
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_sysfs.c
@@ -71,14 +71,46 @@ static int get_boolean(const char *buf, size_t count)
 	return -EINVAL;
 }
 
+static int sprom2hex(const u16 *sprom, char *buf, size_t buf_len)
+{
+	int i, pos = 0;
+
+	for (i = 0; i < BCM43xx_SPROM_SIZE; i++) {
+		pos += snprintf(buf + pos, buf_len - pos - 1,
+				"%04X", swab16(sprom[i]) & 0xFFFF);
+	}
+	pos += snprintf(buf + pos, buf_len - pos - 1, "\n");
+
+	return pos + 1;
+}
+
+static int hex2sprom(u16 *sprom, const char *dump, size_t len)
+{
+	char tmp[5] = { 0 };
+	int cnt = 0;
+	unsigned long parsed;
+
+	if (len < BCM43xx_SPROM_SIZE * sizeof(u16) * 2)
+		return -EINVAL;
+
+	while (cnt < BCM43xx_SPROM_SIZE) {
+		memcpy(tmp, dump, 4);
+		dump += 4;
+		parsed = simple_strtoul(tmp, NULL, 16);
+		sprom[cnt++] = swab16((u16)parsed);
+	}
+
+	return 0;
+}
+
 static ssize_t bcm43xx_attr_sprom_show(struct device *dev,
 				       struct device_attribute *attr,
 				       char *buf)
 {
-	struct bcm43xx_private *bcm = devattr_to_bcm(attr, attr_sprom);
+	struct bcm43xx_private *bcm = dev_to_bcm(dev);
 	u16 *sprom;
 	unsigned long flags;
-	int i, err;
+	int err;
 
 	if (!capable(CAP_NET_ADMIN))
 		return -EPERM;
@@ -91,55 +123,53 @@ static ssize_t bcm43xx_attr_sprom_show(struct device *dev,
 	bcm43xx_lock_mmio(bcm, flags);
 	assert(bcm->initialized);
 	err = bcm43xx_sprom_read(bcm, sprom);
-	if (!err) {
-		for (i = 0; i < BCM43xx_SPROM_SIZE; i++) {
-			buf[i * 2] = sprom[i] & 0x00FF;
-			buf[i * 2 + 1] = (sprom[i] & 0xFF00) >> 8;
-		}
-	}
+	if (!err)
+		err = sprom2hex(sprom, buf, PAGE_SIZE);
 	bcm43xx_unlock_mmio(bcm, flags);
 	kfree(sprom);
 
-	return err ? err : BCM43xx_SPROM_SIZE * sizeof(u16);
+	return err;
 }
 
 static ssize_t bcm43xx_attr_sprom_store(struct device *dev,
 					struct device_attribute *attr,
 					const char *buf, size_t count)
 {
-	struct bcm43xx_private *bcm = devattr_to_bcm(attr, attr_sprom);
+	struct bcm43xx_private *bcm = dev_to_bcm(dev);
 	u16 *sprom;
 	unsigned long flags;
-	int i, err;
+	int err;
 
 	if (!capable(CAP_NET_ADMIN))
 		return -EPERM;
 
-	if (count != BCM43xx_SPROM_SIZE * sizeof(u16))
-		return -EINVAL;
 	sprom = kmalloc(BCM43xx_SPROM_SIZE * sizeof(*sprom),
 			GFP_KERNEL);
 	if (!sprom)
 		return -ENOMEM;
-	for (i = 0; i < BCM43xx_SPROM_SIZE; i++) {
-		sprom[i] = buf[i * 2] & 0xFF;
-		sprom[i] |= ((u16)(buf[i * 2 + 1] & 0xFF)) << 8;
-	}
+	err = hex2sprom(sprom, buf, count);
+	if (err)
+		goto out_kfree;
 	bcm43xx_lock_mmio(bcm, flags);
 	assert(bcm->initialized);
 	err = bcm43xx_sprom_write(bcm, sprom);
 	bcm43xx_unlock_mmio(bcm, flags);
+out_kfree:
 	kfree(sprom);
 
 	return err ? err : count;
 
 }
 
+static DEVICE_ATTR(sprom, 0600,
+		   bcm43xx_attr_sprom_show,
+		   bcm43xx_attr_sprom_store);
+
 static ssize_t bcm43xx_attr_interfmode_show(struct device *dev,
 					    struct device_attribute *attr,
 					    char *buf)
 {
-	struct bcm43xx_private *bcm = devattr_to_bcm(attr, attr_interfmode);
+	struct bcm43xx_private *bcm = dev_to_bcm(dev);
 	unsigned long flags;
 	int err;
 	ssize_t count = 0;
@@ -175,7 +205,7 @@ static ssize_t bcm43xx_attr_interfmode_store(struct device *dev,
 					     struct device_attribute *attr,
 					     const char *buf, size_t count)
 {
-	struct bcm43xx_private *bcm = devattr_to_bcm(attr, attr_interfmode);
+	struct bcm43xx_private *bcm = dev_to_bcm(dev);
 	unsigned long flags;
 	int err;
 	int mode;
@@ -215,11 +245,15 @@ static ssize_t bcm43xx_attr_interfmode_store(struct device *dev,
 	return err ? err : count;
 }
 
+static DEVICE_ATTR(interference, 0644,
+		   bcm43xx_attr_interfmode_show,
+		   bcm43xx_attr_interfmode_store);
+
 static ssize_t bcm43xx_attr_preamble_show(struct device *dev,
 					  struct device_attribute *attr,
 					  char *buf)
 {
-	struct bcm43xx_private *bcm = devattr_to_bcm(attr, attr_preamble);
+	struct bcm43xx_private *bcm = dev_to_bcm(dev);
 	unsigned long flags;
 	int err;
 	ssize_t count;
@@ -245,7 +279,7 @@ static ssize_t bcm43xx_attr_preamble_store(struct device *dev,
 					   struct device_attribute *attr,
 					   const char *buf, size_t count)
 {
-	struct bcm43xx_private *bcm = devattr_to_bcm(attr, attr_preamble);
+	struct bcm43xx_private *bcm = dev_to_bcm(dev);
 	unsigned long flags;
 	int err;
 	int value;
@@ -267,56 +301,41 @@ static ssize_t bcm43xx_attr_preamble_store(struct device *dev,
 	return err ? err : count;
 }
 
+static DEVICE_ATTR(shortpreamble, 0644,
+		   bcm43xx_attr_preamble_show,
+		   bcm43xx_attr_preamble_store);
+
 int bcm43xx_sysfs_register(struct bcm43xx_private *bcm)
 {
 	struct device *dev = &bcm->pci_dev->dev;
-	struct bcm43xx_sysfs *sysfs = &bcm->sysfs;
 	int err;
 
 	assert(bcm->initialized);
 
-	sysfs->attr_sprom.attr.name = "sprom";
-	sysfs->attr_sprom.attr.owner = THIS_MODULE;
-	sysfs->attr_sprom.attr.mode = 0600;
-	sysfs->attr_sprom.show = bcm43xx_attr_sprom_show;
-	sysfs->attr_sprom.store = bcm43xx_attr_sprom_store;
-	err = device_create_file(dev, &sysfs->attr_sprom);
+	err = device_create_file(dev, &dev_attr_sprom);
 	if (err)
 		goto out;
-
-	sysfs->attr_interfmode.attr.name = "interference";
-	sysfs->attr_interfmode.attr.owner = THIS_MODULE;
-	sysfs->attr_interfmode.attr.mode = 0600;
-	sysfs->attr_interfmode.show = bcm43xx_attr_interfmode_show;
-	sysfs->attr_interfmode.store = bcm43xx_attr_interfmode_store;
-	err = device_create_file(dev, &sysfs->attr_interfmode);
+	err = device_create_file(dev, &dev_attr_interference);
 	if (err)
 		goto err_remove_sprom;
-
-	sysfs->attr_preamble.attr.name = "shortpreamble";
-	sysfs->attr_preamble.attr.owner = THIS_MODULE;
-	sysfs->attr_preamble.attr.mode = 0600;
-	sysfs->attr_preamble.show = bcm43xx_attr_preamble_show;
-	sysfs->attr_preamble.store = bcm43xx_attr_preamble_store;
-	err = device_create_file(dev, &sysfs->attr_preamble);
+	err = device_create_file(dev, &dev_attr_shortpreamble);
 	if (err)
 		goto err_remove_interfmode;
 
 out:
 	return err;
 err_remove_interfmode:
-	device_remove_file(dev, &sysfs->attr_interfmode);
+	device_remove_file(dev, &dev_attr_interference);
 err_remove_sprom:
-	device_remove_file(dev, &sysfs->attr_sprom);
+	device_remove_file(dev, &dev_attr_sprom);
 	goto out;
 }
 
 void bcm43xx_sysfs_unregister(struct bcm43xx_private *bcm)
 {
 	struct device *dev = &bcm->pci_dev->dev;
-	struct bcm43xx_sysfs *sysfs = &bcm->sysfs;
 
-	device_remove_file(dev, &sysfs->attr_preamble);
-	device_remove_file(dev, &sysfs->attr_interfmode);
-	device_remove_file(dev, &sysfs->attr_sprom);
+	device_remove_file(dev, &dev_attr_shortpreamble);
+	device_remove_file(dev, &dev_attr_interference);
+	device_remove_file(dev, &dev_attr_sprom);
 }
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_sysfs.h b/drivers/net/wireless/bcm43xx/bcm43xx_sysfs.h
index 57f14514e3e0..cc701df71e2a 100644
--- a/drivers/net/wireless/bcm43xx/bcm43xx_sysfs.h
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_sysfs.h
@@ -1,22 +1,6 @@
 #ifndef BCM43xx_SYSFS_H_
 #define BCM43xx_SYSFS_H_
 
-#include <linux/device.h>
-
-
-struct bcm43xx_sysfs {
-	struct device_attribute attr_sprom;
-	struct device_attribute attr_interfmode;
-	struct device_attribute attr_preamble;
-};
-
-#define devattr_to_bcm(attr, attr_name)	({				\
-	struct bcm43xx_sysfs *__s; struct bcm43xx_private *__p;		\
-	__s = container_of((attr), struct bcm43xx_sysfs, attr_name);	\
-	__p = container_of(__s, struct bcm43xx_private, sysfs);		\
-	__p;								\
-					})
-
 struct bcm43xx_private;
 
 int bcm43xx_sysfs_register(struct bcm43xx_private *bcm);
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_wx.c b/drivers/net/wireless/bcm43xx/bcm43xx_wx.c
index 3daee828ef4b..b45063974ae9 100644
--- a/drivers/net/wireless/bcm43xx/bcm43xx_wx.c
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_wx.c
@@ -182,8 +182,11 @@ static int bcm43xx_wx_set_mode(struct net_device *net_dev,
 		mode = BCM43xx_INITIAL_IWMODE;
 
 	bcm43xx_lock_mmio(bcm, flags);
-	if (bcm->ieee->iw_mode != mode)
-		bcm43xx_set_iwmode(bcm, mode);
+	if (bcm->initialized) {
+		if (bcm->ieee->iw_mode != mode)
+			bcm43xx_set_iwmode(bcm, mode);
+	} else
+		bcm->ieee->iw_mode = mode;
 	bcm43xx_unlock_mmio(bcm, flags);
 
 	return 0;
@@ -962,22 +965,22 @@ static const struct iw_priv_args bcm43xx_priv_wx_args[] = {
 	{
 		.cmd		= PRIV_WX_SET_SHORTPREAMBLE,
 		.set_args	= IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
-		.name		= "set_shortpreambl",
+		.name		= "set_shortpreamb",
 	},
 	{
 		.cmd		= PRIV_WX_GET_SHORTPREAMBLE,
 		.get_args	= IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | MAX_WX_STRING,
-		.name		= "get_shortpreambl",
+		.name		= "get_shortpreamb",
 	},
 	{
 		.cmd		= PRIV_WX_SET_SWENCRYPTION,
 		.set_args	= IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
-		.name		= "set_swencryption",
+		.name		= "set_swencrypt",
 	},
 	{
 		.cmd		= PRIV_WX_GET_SWENCRYPTION,
 		.get_args	= IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | MAX_WX_STRING,
-		.name		= "get_swencryption",
+		.name		= "get_swencrypt",
 	},
 	{
 		.cmd		= PRIV_WX_SPROM_WRITE,
diff --git a/drivers/net/wireless/hostap/hostap_ioctl.c b/drivers/net/wireless/hostap/hostap_ioctl.c
index 8b37e824dfcb..8399de581893 100644
--- a/drivers/net/wireless/hostap/hostap_ioctl.c
+++ b/drivers/net/wireless/hostap/hostap_ioctl.c
@@ -1860,7 +1860,7 @@ static char * __prism2_translate_scan(local_info_t *local,
 	memset(&iwe, 0, sizeof(iwe));
 	iwe.cmd = SIOCGIWFREQ;
 	if (scan) {
-		chan = scan->chid;
+		chan = le16_to_cpu(scan->chid);
 	} else if (bss) {
 		chan = bss->chan;
 	} else {
@@ -1868,7 +1868,7 @@ static char * __prism2_translate_scan(local_info_t *local,
 	}
 
 	if (chan > 0) {
-		iwe.u.freq.m = freq_list[le16_to_cpu(chan - 1)] * 100000;
+		iwe.u.freq.m = freq_list[chan - 1] * 100000;
 		iwe.u.freq.e = 1;
 		current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe,
 						  IW_EV_FREQ_LEN);
diff --git a/drivers/net/wireless/orinoco.c b/drivers/net/wireless/orinoco.c
index 8dfdfbd5966c..c2d0b09e0418 100644
--- a/drivers/net/wireless/orinoco.c
+++ b/drivers/net/wireless/orinoco.c
@@ -390,7 +390,7 @@ static struct iw_statistics *orinoco_get_wireless_stats(struct net_device *dev)
 		}
 	} else {
 		struct {
-			__le16 qual, signal, noise;
+			__le16 qual, signal, noise, unused;
 		} __attribute__ ((packed)) cq;
 
 		err = HERMES_READ_RECORD(hw, USER_BAP,
@@ -812,7 +812,6 @@ static void orinoco_rx_monitor(struct net_device *dev, u16 rxfid,
 	if (datalen > IEEE80211_DATA_LEN + 12) {
 		printk(KERN_DEBUG "%s: oversized monitor frame, "
 		       "data length = %d\n", dev->name, datalen);
-		err = -EIO;
 		stats->rx_length_errors++;
 		goto update_stats;
 	}
@@ -821,8 +820,7 @@ static void orinoco_rx_monitor(struct net_device *dev, u16 rxfid,
 	if (!skb) {
 		printk(KERN_WARNING "%s: Cannot allocate skb for monitor frame\n",
 		       dev->name);
-		err = -ENOMEM;
-		goto drop;
+		goto update_stats;
 	}
 
 	/* Copy the 802.11 header to the skb */
diff --git a/drivers/net/wireless/wavelan.c b/drivers/net/wireless/wavelan.c
index ff192e96268a..dade4b903579 100644
--- a/drivers/net/wireless/wavelan.c
+++ b/drivers/net/wireless/wavelan.c
@@ -4306,7 +4306,7 @@ out:
  * Insertion of the module
  * I'm now quite proud of the multi-device support.
  */
-int init_module(void)
+int __init init_module(void)
 {
 	int ret = -EIO;		/* Return error if no cards found */
 	int i;
diff --git a/drivers/parisc/pdc_stable.c b/drivers/parisc/pdc_stable.c
index 4e53be9c03ab..bbeabe3fc4c6 100644
--- a/drivers/parisc/pdc_stable.c
+++ b/drivers/parisc/pdc_stable.c
@@ -535,7 +535,7 @@ pdcs_auto_read(struct subsystem *entry, char *buf, int knob)
 {
 	char *out = buf;
 	struct pdcspath_entry *pathentry;
-	
+
 	if (!entry || !buf)
 		return -EINVAL;
 
diff --git a/drivers/parisc/sba_iommu.c b/drivers/parisc/sba_iommu.c
index 42b32ff2fca6..278f325021ee 100644
--- a/drivers/parisc/sba_iommu.c
+++ b/drivers/parisc/sba_iommu.c
@@ -178,6 +178,11 @@ extern struct proc_dir_entry * proc_mckinley_root;
 #define ROPE6_CTL	0x230
 #define ROPE7_CTL	0x238
 
+#define IOC_ROPE0_CFG	0x500	/* pluto only */
+#define   IOC_ROPE_AO	  0x10	/* Allow "Relaxed Ordering" */
+
+
+
 #define HF_ENABLE	0x40
 
 
@@ -1759,19 +1764,33 @@ printk("sba_hw_init(): mem_boot 0x%x 0x%x 0x%x 0x%x\n", PAGE0->mem_boot.hpa,
 
 	sba_dev->num_ioc = num_ioc;
 	for (i = 0; i < num_ioc; i++) {
-		/*
-		** Make sure the box crashes if we get any errors on a rope.
-		*/
-		WRITE_REG(HF_ENABLE, sba_dev->ioc[i].ioc_hpa + ROPE0_CTL);
-		WRITE_REG(HF_ENABLE, sba_dev->ioc[i].ioc_hpa + ROPE1_CTL);
-		WRITE_REG(HF_ENABLE, sba_dev->ioc[i].ioc_hpa + ROPE2_CTL);
-		WRITE_REG(HF_ENABLE, sba_dev->ioc[i].ioc_hpa + ROPE3_CTL);
-		WRITE_REG(HF_ENABLE, sba_dev->ioc[i].ioc_hpa + ROPE4_CTL);
-		WRITE_REG(HF_ENABLE, sba_dev->ioc[i].ioc_hpa + ROPE5_CTL);
-		WRITE_REG(HF_ENABLE, sba_dev->ioc[i].ioc_hpa + ROPE6_CTL);
-		WRITE_REG(HF_ENABLE, sba_dev->ioc[i].ioc_hpa + ROPE7_CTL);
-
-		/* flush out the writes */
+		unsigned long ioc_hpa = sba_dev->ioc[i].ioc_hpa;
+		unsigned int j;
+
+		for (j=0; j < sizeof(u64) * ROPES_PER_IOC; j+=sizeof(u64)) {
+
+			/*
+			 * Clear ROPE(N)_CONFIG AO bit.
+			 * Disables "NT Ordering" (~= !"Relaxed Ordering")
+			 * Overrides bit 1 in DMA Hint Sets.
+			 * Improves netperf UDP_STREAM by ~10% for bcm5701.
+			 */
+			if (IS_PLUTO(sba_dev->iodc)) {
+				unsigned long rope_cfg, cfg_val;
+
+				rope_cfg = ioc_hpa + IOC_ROPE0_CFG + j;
+				cfg_val = READ_REG(rope_cfg);
+				cfg_val &= ~IOC_ROPE_AO;
+				WRITE_REG(cfg_val, rope_cfg);
+			}
+
+			/*
+			** Make sure the box crashes on rope errors.
+			*/
+			WRITE_REG(HF_ENABLE, ioc_hpa + ROPE0_CTL + j);
+		}
+
+		/* flush out the last writes */
 		READ_REG(sba_dev->ioc[i].ioc_hpa + ROPE7_CTL);
 
 		DBG_INIT("	ioc[%d] ROPE_CFG 0x%Lx  ROPE_DBG 0x%Lx\n",
diff --git a/drivers/parisc/superio.c b/drivers/parisc/superio.c
index 719b863bc20e..828eb45062de 100644
--- a/drivers/parisc/superio.c
+++ b/drivers/parisc/superio.c
@@ -155,7 +155,7 @@ superio_init(struct pci_dev *pcidev)
 	struct pci_dev *pdev = sio->lio_pdev;
 	u16 word;
 
-        if (sio->suckyio_irq_enabled)                                       
+	if (sio->suckyio_irq_enabled)
 		return;
 
 	BUG_ON(!pdev);
@@ -194,7 +194,7 @@ superio_init(struct pci_dev *pcidev)
 	request_region (sio->acpi_base, 0x1f, "acpi");
 
 	/* Enable the legacy I/O function */
-        pci_read_config_word (pdev, PCI_COMMAND, &word);
+	pci_read_config_word (pdev, PCI_COMMAND, &word);
 	word |= PCI_COMMAND_SERR | PCI_COMMAND_PARITY | PCI_COMMAND_IO;
 	pci_write_config_word (pdev, PCI_COMMAND, word);
 
diff --git a/drivers/parport/parport_pc.c b/drivers/parport/parport_pc.c
index d5890027f8af..48bbf32fd980 100644
--- a/drivers/parport/parport_pc.c
+++ b/drivers/parport/parport_pc.c
@@ -97,7 +97,7 @@ static struct superio_struct {	/* For Super-IO chips autodetection */
 	int io;
 	int irq;
 	int dma;
-} superios[NR_SUPERIOS] __devinitdata = { {0,},};
+} superios[NR_SUPERIOS] = { {0,},};
 
 static int user_specified;
 #if defined(CONFIG_PARPORT_PC_SUPERIO) || \
@@ -1557,7 +1557,7 @@ static int __devinit get_superio_dma (struct parport *p)
 	return PARPORT_DMA_NONE;
 }
 
-static int __devinit get_superio_irq (struct parport *p)
+static int get_superio_irq (struct parport *p)
 {
 	int i=0;
         while( (superios[i].io != p->base) && (i<NR_SUPERIOS))
@@ -1579,7 +1579,7 @@ static int __devinit get_superio_irq (struct parport *p)
  *                         this shall always be the case!)
  *
  */
-static int __devinit parport_SPP_supported(struct parport *pb)
+static int parport_SPP_supported(struct parport *pb)
 {
 	unsigned char r, w;
 
@@ -1660,7 +1660,7 @@ static int __devinit parport_SPP_supported(struct parport *pb)
  * two bits of ECR aren't writable, so we check by writing ECR and
  * reading it back to see if it's what we expect.
  */
-static int __devinit parport_ECR_present(struct parport *pb)
+static int parport_ECR_present(struct parport *pb)
 {
 	struct parport_pc_private *priv = pb->private_data;
 	unsigned char r = 0xc;
@@ -1712,7 +1712,7 @@ static int __devinit parport_ECR_present(struct parport *pb)
  * be misdetected here is rather academic. 
  */
 
-static int __devinit parport_PS2_supported(struct parport *pb)
+static int parport_PS2_supported(struct parport *pb)
 {
 	int ok = 0;
   
@@ -1868,7 +1868,7 @@ static int __devinit parport_ECP_supported(struct parport *pb)
 }
 #endif
 
-static int __devinit parport_ECPPS2_supported(struct parport *pb)
+static int parport_ECPPS2_supported(struct parport *pb)
 {
 	const struct parport_pc_private *priv = pb->private_data;
 	int result;
@@ -1886,7 +1886,7 @@ static int __devinit parport_ECPPS2_supported(struct parport *pb)
 
 /* EPP mode detection  */
 
-static int __devinit parport_EPP_supported(struct parport *pb)
+static int parport_EPP_supported(struct parport *pb)
 {
 	const struct parport_pc_private *priv = pb->private_data;
 
@@ -1931,7 +1931,7 @@ static int __devinit parport_EPP_supported(struct parport *pb)
 	return 1;
 }
 
-static int __devinit parport_ECPEPP_supported(struct parport *pb)
+static int parport_ECPEPP_supported(struct parport *pb)
 {
 	struct parport_pc_private *priv = pb->private_data;
 	int result;
@@ -2073,7 +2073,7 @@ static int __devinit irq_probe_SPP(struct parport *pb)
  * When ECP is available we can autoprobe for IRQs.
  * NOTE: If we can autoprobe it, we can register the IRQ.
  */
-static int __devinit parport_irq_probe(struct parport *pb)
+static int parport_irq_probe(struct parport *pb)
 {
 	struct parport_pc_private *priv = pb->private_data;
 
@@ -2779,7 +2779,7 @@ static struct parport_pc_pci {
 	/* If set, this is called after probing for ports.  If 'failed'
 	 * is non-zero we couldn't use any of the ports. */
 	void (*postinit_hook) (struct pci_dev *pdev, int failed);
-} cards[] __devinitdata = {
+} cards[] = {
 	/* siig_1p_10x */		{ 1, { { 2, 3 }, } },
 	/* siig_2p_10x */		{ 2, { { 2, 3 }, { 4, 5 }, } },
 	/* siig_1p_20x */		{ 1, { { 0, 1 }, } },
diff --git a/drivers/pci/hotplug/rpaphp_core.c b/drivers/pci/hotplug/rpaphp_core.c
index 6e79f5675b0d..638004546700 100644
--- a/drivers/pci/hotplug/rpaphp_core.c
+++ b/drivers/pci/hotplug/rpaphp_core.c
@@ -360,9 +360,6 @@ static int __init rpaphp_init(void)
 	while ((dn = of_find_node_by_type(dn, "pci")))
 		rpaphp_add_slot(dn);
 
-	if (!num_slots)
-		return -ENODEV;
-
 	return 0;
 }
 
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index a77e79c8c82e..9855c4c920b8 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -504,6 +504,201 @@ void pci_scan_msi_device(struct pci_dev *dev)
 		nr_reserved_vectors++;
 }
 
+#ifdef CONFIG_PM
+int pci_save_msi_state(struct pci_dev *dev)
+{
+	int pos, i = 0;
+	u16 control;
+	struct pci_cap_saved_state *save_state;
+	u32 *cap;
+
+	pos = pci_find_capability(dev, PCI_CAP_ID_MSI);
+	if (pos <= 0 || dev->no_msi)
+		return 0;
+
+	pci_read_config_word(dev, msi_control_reg(pos), &control);
+	if (!(control & PCI_MSI_FLAGS_ENABLE))
+		return 0;
+
+	save_state = kzalloc(sizeof(struct pci_cap_saved_state) + sizeof(u32) * 5,
+		GFP_KERNEL);
+	if (!save_state) {
+		printk(KERN_ERR "Out of memory in pci_save_msi_state\n");
+		return -ENOMEM;
+	}
+	cap = &save_state->data[0];
+
+	pci_read_config_dword(dev, pos, &cap[i++]);
+	control = cap[0] >> 16;
+	pci_read_config_dword(dev, pos + PCI_MSI_ADDRESS_LO, &cap[i++]);
+	if (control & PCI_MSI_FLAGS_64BIT) {
+		pci_read_config_dword(dev, pos + PCI_MSI_ADDRESS_HI, &cap[i++]);
+		pci_read_config_dword(dev, pos + PCI_MSI_DATA_64, &cap[i++]);
+	} else
+		pci_read_config_dword(dev, pos + PCI_MSI_DATA_32, &cap[i++]);
+	if (control & PCI_MSI_FLAGS_MASKBIT)
+		pci_read_config_dword(dev, pos + PCI_MSI_MASK_BIT, &cap[i++]);
+	disable_msi_mode(dev, pos, PCI_CAP_ID_MSI);
+	save_state->cap_nr = PCI_CAP_ID_MSI;
+	pci_add_saved_cap(dev, save_state);
+	return 0;
+}
+
+void pci_restore_msi_state(struct pci_dev *dev)
+{
+	int i = 0, pos;
+	u16 control;
+	struct pci_cap_saved_state *save_state;
+	u32 *cap;
+
+	save_state = pci_find_saved_cap(dev, PCI_CAP_ID_MSI);
+	pos = pci_find_capability(dev, PCI_CAP_ID_MSI);
+	if (!save_state || pos <= 0)
+		return;
+	cap = &save_state->data[0];
+
+	control = cap[i++] >> 16;
+	pci_write_config_dword(dev, pos + PCI_MSI_ADDRESS_LO, cap[i++]);
+	if (control & PCI_MSI_FLAGS_64BIT) {
+		pci_write_config_dword(dev, pos + PCI_MSI_ADDRESS_HI, cap[i++]);
+		pci_write_config_dword(dev, pos + PCI_MSI_DATA_64, cap[i++]);
+	} else
+		pci_write_config_dword(dev, pos + PCI_MSI_DATA_32, cap[i++]);
+	if (control & PCI_MSI_FLAGS_MASKBIT)
+		pci_write_config_dword(dev, pos + PCI_MSI_MASK_BIT, cap[i++]);
+	pci_write_config_word(dev, pos + PCI_MSI_FLAGS, control);
+	enable_msi_mode(dev, pos, PCI_CAP_ID_MSI);
+	pci_remove_saved_cap(save_state);
+	kfree(save_state);
+}
+
+int pci_save_msix_state(struct pci_dev *dev)
+{
+	int pos;
+	u16 control;
+	struct pci_cap_saved_state *save_state;
+
+	pos = pci_find_capability(dev, PCI_CAP_ID_MSIX);
+	if (pos <= 0 || dev->no_msi)
+		return 0;
+
+	pci_read_config_word(dev, msi_control_reg(pos), &control);
+	if (!(control & PCI_MSIX_FLAGS_ENABLE))
+		return 0;
+	save_state = kzalloc(sizeof(struct pci_cap_saved_state) + sizeof(u16),
+		GFP_KERNEL);
+	if (!save_state) {
+		printk(KERN_ERR "Out of memory in pci_save_msix_state\n");
+		return -ENOMEM;
+	}
+	*((u16 *)&save_state->data[0]) = control;
+
+	disable_msi_mode(dev, pos, PCI_CAP_ID_MSIX);
+	save_state->cap_nr = PCI_CAP_ID_MSIX;
+	pci_add_saved_cap(dev, save_state);
+	return 0;
+}
+
+void pci_restore_msix_state(struct pci_dev *dev)
+{
+	u16 save;
+	int pos;
+	int vector, head, tail = 0;
+	void __iomem *base;
+	int j;
+	struct msg_address address;
+	struct msg_data data;
+	struct msi_desc *entry;
+	int temp;
+	struct pci_cap_saved_state *save_state;
+
+	save_state = pci_find_saved_cap(dev, PCI_CAP_ID_MSIX);
+	if (!save_state)
+		return;
+	save = *((u16 *)&save_state->data[0]);
+	pci_remove_saved_cap(save_state);
+	kfree(save_state);
+
+	pos = pci_find_capability(dev, PCI_CAP_ID_MSIX);
+	if (pos <= 0)
+		return;
+
+	/* route the table */
+	temp = dev->irq;
+	if (msi_lookup_vector(dev, PCI_CAP_ID_MSIX))
+		return;
+	vector = head = dev->irq;
+	while (head != tail) {
+		entry = msi_desc[vector];
+		base = entry->mask_base;
+		j = entry->msi_attrib.entry_nr;
+
+		msi_address_init(&address);
+		msi_data_init(&data, vector);
+
+		address.lo_address.value &= MSI_ADDRESS_DEST_ID_MASK;
+		address.lo_address.value |= entry->msi_attrib.current_cpu <<
+					MSI_TARGET_CPU_SHIFT;
+
+		writel(address.lo_address.value,
+			base + j * PCI_MSIX_ENTRY_SIZE +
+			PCI_MSIX_ENTRY_LOWER_ADDR_OFFSET);
+		writel(address.hi_address,
+			base + j * PCI_MSIX_ENTRY_SIZE +
+			PCI_MSIX_ENTRY_UPPER_ADDR_OFFSET);
+		writel(*(u32*)&data,
+			base + j * PCI_MSIX_ENTRY_SIZE +
+			PCI_MSIX_ENTRY_DATA_OFFSET);
+
+		tail = msi_desc[vector]->link.tail;
+		vector = tail;
+	}
+	dev->irq = temp;
+
+	pci_write_config_word(dev, msi_control_reg(pos), save);
+	enable_msi_mode(dev, pos, PCI_CAP_ID_MSIX);
+}
+#endif
+
+static void msi_register_init(struct pci_dev *dev, struct msi_desc *entry)
+{
+	struct msg_address address;
+	struct msg_data data;
+	int pos, vector = dev->irq;
+	u16 control;
+
+   	pos = pci_find_capability(dev, PCI_CAP_ID_MSI);
+	pci_read_config_word(dev, msi_control_reg(pos), &control);
+	/* Configure MSI capability structure */
+	msi_address_init(&address);
+	msi_data_init(&data, vector);
+	entry->msi_attrib.current_cpu = ((address.lo_address.u.dest_id >>
+				MSI_TARGET_CPU_SHIFT) & MSI_TARGET_CPU_MASK);
+	pci_write_config_dword(dev, msi_lower_address_reg(pos),
+			address.lo_address.value);
+	if (is_64bit_address(control)) {
+		pci_write_config_dword(dev,
+			msi_upper_address_reg(pos), address.hi_address);
+		pci_write_config_word(dev,
+			msi_data_reg(pos, 1), *((u32*)&data));
+	} else
+		pci_write_config_word(dev,
+			msi_data_reg(pos, 0), *((u32*)&data));
+	if (entry->msi_attrib.maskbit) {
+		unsigned int maskbits, temp;
+		/* All MSIs are unmasked by default, Mask them all */
+		pci_read_config_dword(dev,
+			msi_mask_bits_reg(pos, is_64bit_address(control)),
+			&maskbits);
+		temp = (1 << multi_msi_capable(control));
+		temp = ((temp - 1) & ~temp);
+		maskbits |= temp;
+		pci_write_config_dword(dev,
+			msi_mask_bits_reg(pos, is_64bit_address(control)),
+			maskbits);
+	}
+}
+
 /**
  * msi_capability_init - configure device's MSI capability structure
  * @dev: pointer to the pci_dev data structure of MSI device function
@@ -516,8 +711,6 @@ void pci_scan_msi_device(struct pci_dev *dev)
 static int msi_capability_init(struct pci_dev *dev)
 {
 	struct msi_desc *entry;
-	struct msg_address address;
-	struct msg_data data;
 	int pos, vector;
 	u16 control;
 
@@ -549,33 +742,8 @@ static int msi_capability_init(struct pci_dev *dev)
 	/* Replace with MSI handler */
 	irq_handler_init(PCI_CAP_ID_MSI, vector, entry->msi_attrib.maskbit);
 	/* Configure MSI capability structure */
-	msi_address_init(&address);
-	msi_data_init(&data, vector);
-	entry->msi_attrib.current_cpu = ((address.lo_address.u.dest_id >>
-				MSI_TARGET_CPU_SHIFT) & MSI_TARGET_CPU_MASK);
-	pci_write_config_dword(dev, msi_lower_address_reg(pos),
-			address.lo_address.value);
-	if (is_64bit_address(control)) {
-		pci_write_config_dword(dev,
-			msi_upper_address_reg(pos), address.hi_address);
-		pci_write_config_word(dev,
-			msi_data_reg(pos, 1), *((u32*)&data));
-	} else
-		pci_write_config_word(dev,
-			msi_data_reg(pos, 0), *((u32*)&data));
-	if (entry->msi_attrib.maskbit) {
-		unsigned int maskbits, temp;
-		/* All MSIs are unmasked by default, Mask them all */
-		pci_read_config_dword(dev,
-			msi_mask_bits_reg(pos, is_64bit_address(control)),
-			&maskbits);
-		temp = (1 << multi_msi_capable(control));
-		temp = ((temp - 1) & ~temp);
-		maskbits |= temp;
-		pci_write_config_dword(dev,
-			msi_mask_bits_reg(pos, is_64bit_address(control)),
-			maskbits);
-	}
+	msi_register_init(dev, entry);
+
 	attach_msi_entry(entry, vector);
 	/* Set MSI enabled bits	 */
 	enable_msi_mode(dev, pos, PCI_CAP_ID_MSI);
@@ -625,8 +793,10 @@ static int msix_capability_init(struct pci_dev *dev,
 		if (!entry)
 			break;
 		vector = get_msi_vector(dev);
-		if (vector < 0)
+		if (vector < 0) {
+			kmem_cache_free(msi_cachep, entry);
 			break;
+		}
 
  		j = entries[i].entry;
  		entries[i].vector = vector;
@@ -731,6 +901,7 @@ int pci_enable_msi(struct pci_dev* dev)
 			vector_irq[dev->irq] = -1;
 			nr_released_vectors--;
 			spin_unlock_irqrestore(&msi_lock, flags);
+			msi_register_init(dev, msi_desc[dev->irq]);
 			enable_msi_mode(dev, pos, PCI_CAP_ID_MSI);
 			return 0;
 		}
diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c
index 6917c6cb0912..c2ecae5ff0c1 100644
--- a/drivers/pci/pci-acpi.c
+++ b/drivers/pci/pci-acpi.c
@@ -33,13 +33,10 @@ acpi_query_osc (
 	acpi_status		status;
 	struct acpi_object_list	input;
 	union acpi_object 	in_params[4];
-	struct acpi_buffer	output;
-	union acpi_object 	out_obj;	
+	struct acpi_buffer	output = {ACPI_ALLOCATE_BUFFER, NULL};
+	union acpi_object 	*out_obj;
 	u32			osc_dw0;
 
-	/* Setting up output buffer */
-	output.length = sizeof(out_obj) + 3*sizeof(u32);  
-	output.pointer = &out_obj;
 	
 	/* Setting up input parameters */
 	input.count = 4;
@@ -61,12 +58,15 @@ acpi_query_osc (
 			"Evaluate _OSC Set fails. Status = 0x%04x\n", status);
 		return status;
 	}
-	if (out_obj.type != ACPI_TYPE_BUFFER) {
+	out_obj = output.pointer;
+
+	if (out_obj->type != ACPI_TYPE_BUFFER) {
 		printk(KERN_DEBUG  
 			"Evaluate _OSC returns wrong type\n");
-		return AE_TYPE;
+		status = AE_TYPE;
+		goto query_osc_out;
 	}
-	osc_dw0 = *((u32 *) out_obj.buffer.pointer);
+	osc_dw0 = *((u32 *) out_obj->buffer.pointer);
 	if (osc_dw0) {
 		if (osc_dw0 & OSC_REQUEST_ERROR)
 			printk(KERN_DEBUG "_OSC request fails\n"); 
@@ -76,15 +76,21 @@ acpi_query_osc (
 			printk(KERN_DEBUG "_OSC invalid revision\n"); 
 		if (osc_dw0 & OSC_CAPABILITIES_MASK_ERROR) {
 			/* Update Global Control Set */
-			global_ctrlsets = *((u32 *)(out_obj.buffer.pointer+8));
-			return AE_OK;
+			global_ctrlsets = *((u32 *)(out_obj->buffer.pointer+8));
+			status = AE_OK;
+			goto query_osc_out;
 		}
-		return AE_ERROR;
+		status = AE_ERROR;
+		goto query_osc_out;
 	}
 
 	/* Update Global Control Set */
-	global_ctrlsets = *((u32 *)(out_obj.buffer.pointer + 8));
-	return AE_OK;
+	global_ctrlsets = *((u32 *)(out_obj->buffer.pointer + 8));
+	status = AE_OK;
+
+query_osc_out:
+	kfree(output.pointer);
+	return status;
 }
 
 
@@ -96,14 +102,10 @@ acpi_run_osc (
 	acpi_status		status;
 	struct acpi_object_list	input;
 	union acpi_object 	in_params[4];
-	struct acpi_buffer	output;
-	union acpi_object 	out_obj;	
+	struct acpi_buffer	output = {ACPI_ALLOCATE_BUFFER, NULL};
+	union acpi_object 	*out_obj;
 	u32			osc_dw0;
 
-	/* Setting up output buffer */
-	output.length = sizeof(out_obj) + 3*sizeof(u32);  
-	output.pointer = &out_obj;
-	
 	/* Setting up input parameters */
 	input.count = 4;
 	input.pointer = in_params;
@@ -124,12 +126,14 @@ acpi_run_osc (
 			"Evaluate _OSC Set fails. Status = 0x%04x\n", status);
 		return status;
 	}
-	if (out_obj.type != ACPI_TYPE_BUFFER) {
+	out_obj = output.pointer;
+	if (out_obj->type != ACPI_TYPE_BUFFER) {
 		printk(KERN_DEBUG  
 			"Evaluate _OSC returns wrong type\n");
-		return AE_TYPE;
+		status = AE_TYPE;
+		goto run_osc_out;
 	}
-	osc_dw0 = *((u32 *) out_obj.buffer.pointer);
+	osc_dw0 = *((u32 *) out_obj->buffer.pointer);
 	if (osc_dw0) {
 		if (osc_dw0 & OSC_REQUEST_ERROR)
 			printk(KERN_DEBUG "_OSC request fails\n"); 
@@ -139,11 +143,17 @@ acpi_run_osc (
 			printk(KERN_DEBUG "_OSC invalid revision\n"); 
 		if (osc_dw0 & OSC_CAPABILITIES_MASK_ERROR) {
 			printk(KERN_DEBUG "_OSC FW not grant req. control\n");
-			return AE_SUPPORT;
+			status = AE_SUPPORT;
+			goto run_osc_out;
 		}
-		return AE_ERROR;
+		status = AE_ERROR;
+		goto run_osc_out;
 	}
-	return AE_OK;
+	status = AE_OK;
+
+run_osc_out:
+	kfree(output.pointer);
+	return status;
 }
 
 /**
diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
index f22f69ac6445..1456759936c5 100644
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -271,10 +271,12 @@ static int pci_device_suspend(struct device * dev, pm_message_t state)
 	struct pci_driver * drv = pci_dev->driver;
 	int i = 0;
 
-	if (drv && drv->suspend)
+	if (drv && drv->suspend) {
 		i = drv->suspend(pci_dev, state);
-	else
+		suspend_report_result(drv->suspend, i);
+	} else {
 		pci_save_state(pci_dev);
+	}
 	return i;
 }
 
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index bea1ad1ad5ba..2329f941a0dc 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -307,9 +307,11 @@ pci_set_power_state(struct pci_dev *dev, pci_power_t state)
 	 * Can enter D0 from any state, but if we can only go deeper 
 	 * to sleep if we're already in a low power state
 	 */
-	if (state != PCI_D0 && dev->current_state > state)
+	if (state != PCI_D0 && dev->current_state > state) {
+		printk(KERN_ERR "%s(): %s: state=%d, current state=%d\n",
+			__FUNCTION__, pci_name(dev), state, dev->current_state);
 		return -EINVAL;
-	else if (dev->current_state == state) 
+	} else if (dev->current_state == state)
 		return 0;        /* we're already there */
 
 	/* find PCI PM capability in list */
@@ -444,6 +446,10 @@ pci_save_state(struct pci_dev *dev)
 	/* XXX: 100% dword access ok here? */
 	for (i = 0; i < 16; i++)
 		pci_read_config_dword(dev, i * 4,&dev->saved_config_space[i]);
+	if ((i = pci_save_msi_state(dev)) != 0)
+		return i;
+	if ((i = pci_save_msix_state(dev)) != 0)
+		return i;
 	return 0;
 }
 
@@ -458,6 +464,8 @@ pci_restore_state(struct pci_dev *dev)
 
 	for (i = 0; i < 16; i++)
 		pci_write_config_dword(dev,i * 4, dev->saved_config_space[i]);
+	pci_restore_msi_state(dev);
+	pci_restore_msix_state(dev);
 	return 0;
 }
 
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index 8f3fb47ea671..30630cbe2fe3 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -55,6 +55,17 @@ void pci_no_msi(void);
 static inline void disable_msi_mode(struct pci_dev *dev, int pos, int type) { }
 static inline void pci_no_msi(void) { }
 #endif
+#if defined(CONFIG_PCI_MSI) && defined(CONFIG_PM)
+int pci_save_msi_state(struct pci_dev *dev);
+int pci_save_msix_state(struct pci_dev *dev);
+void pci_restore_msi_state(struct pci_dev *dev);
+void pci_restore_msix_state(struct pci_dev *dev);
+#else
+static inline int pci_save_msi_state(struct pci_dev *dev) { return 0; }
+static inline int pci_save_msix_state(struct pci_dev *dev) { return 0; }
+static inline void pci_restore_msi_state(struct pci_dev *dev) {}
+static inline void pci_restore_msix_state(struct pci_dev *dev) {}
+#endif
 
 extern int pcie_mch_quirk;
 extern struct device_attribute pci_dev_attrs[];
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 4970f47be72c..d378478612fb 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -592,7 +592,7 @@ static void __init quirk_amd_8131_ioapic(struct pci_dev *dev)
                 pci_write_config_byte( dev, AMD8131_MISC, tmp);
         }
 } 
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_APIC,         quirk_amd_8131_ioapic ); 
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_amd_8131_ioapic);
 
 static void __init quirk_svw_msi(struct pci_dev *dev)
 {
@@ -634,6 +634,9 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA,	PCI_DEVICE_ID_VIA_82C686_4,	quirk_vi
  * non-x86 architectures (yes Via exists on PPC among other places),
  * we must mask the PCI_INTERRUPT_LINE value versus 0xf to get
  * interrupts delivered properly.
+ *
+ * Some of the on-chip devices are actually '586 devices' so they are
+ * listed here.
  */
 static void quirk_via_irq(struct pci_dev *dev)
 {
@@ -642,13 +645,19 @@ static void quirk_via_irq(struct pci_dev *dev)
 	new_irq = dev->irq & 0xf;
 	pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq);
 	if (new_irq != irq) {
-		printk(KERN_INFO "PCI: Via IRQ fixup for %s, from %d to %d\n",
+		printk(KERN_INFO "PCI: VIA IRQ fixup for %s, from %d to %d\n",
 			pci_name(dev), irq, new_irq);
 		udelay(15);	/* unknown if delay really needed */
 		pci_write_config_byte(dev, PCI_INTERRUPT_LINE, new_irq);
 	}
 }
-DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_via_irq);
+DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_0, quirk_via_irq);
+DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_1, quirk_via_irq);
+DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_2, quirk_via_irq);
+DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_3, quirk_via_irq);
+DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, quirk_via_irq);
+DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4, quirk_via_irq);
+DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_5, quirk_via_irq);
 
 /*
  * VIA VT82C598 has its device ID settable and many BIOSes
@@ -865,6 +874,36 @@ static void __init quirk_eisa_bridge(struct pci_dev *dev)
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_82375,	quirk_eisa_bridge );
 
 /*
+ * On the MSI-K8T-Neo2Fir Board, the internal Soundcard is disabled
+ * when a PCI-Soundcard is added. The BIOS only gives Options
+ * "Disabled" and "AUTO". This Quirk Sets the corresponding
+ * Register-Value to enable the Soundcard.
+ */
+static void __init k8t_sound_hostbridge(struct pci_dev *dev)
+{
+	unsigned char val;
+
+	printk(KERN_INFO "PCI: Quirk-MSI-K8T Soundcard On\n");
+	pci_read_config_byte(dev, 0x50, &val);
+	if (val == 0x88 || val == 0xc8) {
+		pci_write_config_byte(dev, 0x50, val & (~0x40));
+
+		/* Verify the Change for Status output */
+		pci_read_config_byte(dev, 0x50, &val);
+		if (val & 0x40)
+			printk(KERN_INFO "PCI: MSI-K8T soundcard still off\n");
+		else
+			printk(KERN_INFO "PCI: MSI-K8T soundcard on\n");
+	} else {
+		printk(KERN_INFO "PCI: Unexpected Value in PCI-Register: "
+					"no Change!\n");
+	}
+
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, k8t_sound_hostbridge);
+
+#ifndef CONFIG_ACPI_SLEEP
+/*
  * On ASUS P4B boards, the SMBus PCI Device within the ICH2/4 southbridge
  * is not activated. The myth is that Asus said that they do not want the
  * users to be irritated by just another PCI Device in the Win98 device
@@ -875,8 +914,12 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_82375,	quirk_e
  * bridge. Unfortunately, this device has no subvendor/subdevice ID. So it 
  * becomes necessary to do this tweak in two steps -- I've chosen the Host
  * bridge as trigger.
+ *
+ * Actually, leaving it unhidden and not redoing the quirk over suspend2ram
+ * will cause thermal management to break down, and causing machine to
+ * overheat.
  */
-static int __initdata asus_hides_smbus = 0;
+static int __initdata asus_hides_smbus;
 
 static void __init asus_hides_smbus_hostbridge(struct pci_dev *dev)
 {
@@ -921,6 +964,7 @@ static void __init asus_hides_smbus_hostbridge(struct pci_dev *dev)
 		if (dev->device == PCI_DEVICE_ID_INTEL_82915GM_HB) {
 			switch (dev->subsystem_device) {
 			case 0x1882: /* M6V notebook */
+			case 0x1977: /* A6VA notebook */
 				asus_hides_smbus = 1;
 			}
 		}
@@ -999,6 +1043,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_82801BA_0,	asu
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_82801CA_12,	asus_hides_smbus_lpc );
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_82801DB_12,	asus_hides_smbus_lpc );
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_82801EB_0,	asus_hides_smbus_lpc );
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_ICH6_1,	asus_hides_smbus_lpc );
 
 static void __init asus_hides_smbus_lpc_ich6(struct pci_dev *dev)
 {
@@ -1017,6 +1062,8 @@ static void __init asus_hides_smbus_lpc_ich6(struct pci_dev *dev)
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_ICH6_1,	asus_hides_smbus_lpc_ich6 );
 
+#endif
+
 /*
  * SiS 96x south bridge: BIOS typically hides SMBus device...
  */
diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig
index cba6c9eef28e..61cb4b29f55c 100644
--- a/drivers/pcmcia/Kconfig
+++ b/drivers/pcmcia/Kconfig
@@ -250,7 +250,7 @@ config M32R_CFC_NUM
 
 config PCMCIA_VRC4171
 	tristate "NEC VRC4171 Card Controllers support"
-	depends on VRC4171 && PCMCIA
+	depends on CPU_VR41XX && ISA && PCMCIA
 
 config PCMCIA_VRC4173
 	tristate "NEC VRC4173 CARDU support"
diff --git a/drivers/pcmcia/at91_cf.c b/drivers/pcmcia/at91_cf.c
index 67cc5f7d0c90..a4d50940ebeb 100644
--- a/drivers/pcmcia/at91_cf.c
+++ b/drivers/pcmcia/at91_cf.c
@@ -28,8 +28,6 @@
 #include <asm/arch/gpio.h>
 
 
-#define	CF_SIZE		0x30000000	/* CS5+CS6: unavailable */
-
 /*
  * A0..A10 work in each range; A23 indicates I/O space;  A25 is CFRNW;
  * some other bit in {A24,A22..A11} is nREG to flag memory access
@@ -76,7 +74,8 @@ static irqreturn_t at91_cf_irq(int irq, void *_cf, struct pt_regs *r)
 		/* kick pccard as needed */
 		if (present != cf->present) {
 			cf->present = present;
-			pr_debug("%s: card %s\n", driver_name, present ? "present" : "gone");
+			pr_debug("%s: card %s\n", driver_name,
+					present ? "present" : "gone");
 			pcmcia_parse_events(&cf->socket, SS_DETECT);
 		}
 	}
@@ -93,7 +92,7 @@ static int at91_cf_get_status(struct pcmcia_socket *s, u_int *sp)
 
 	cf = container_of(s, struct at91_cf_socket, socket);
 
-	/* NOTE: we assume 3VCARD, not XVCARD...  */
+	/* NOTE: CF is always 3VCARD */
 	if (at91_cf_present(cf)) {
 		int rdy	= cf->board->irq_pin;	/* RDY/nIRQ */
 		int vcc	= cf->board->vcc_pin;
@@ -109,7 +108,8 @@ static int at91_cf_get_status(struct pcmcia_socket *s, u_int *sp)
 	return 0;
 }
 
-static int at91_cf_set_socket(struct pcmcia_socket *sock, struct socket_state_t *s)
+static int
+at91_cf_set_socket(struct pcmcia_socket *sock, struct socket_state_t *s)
 {
 	struct at91_cf_socket	*cf;
 
@@ -184,7 +184,8 @@ static int at91_cf_set_io_map(struct pcmcia_socket *s, struct pccard_io_map *io)
 }
 
 /* pcmcia layer maps/unmaps mem regions */
-static int at91_cf_set_mem_map(struct pcmcia_socket *s, struct pccard_mem_map *map)
+static int
+at91_cf_set_mem_map(struct pcmcia_socket *s, struct pccard_mem_map *map)
 {
 	struct at91_cf_socket	*cf;
 
@@ -218,12 +219,17 @@ static int __init at91_cf_probe(struct device *dev)
 	struct at91_cf_socket	*cf;
 	struct at91_cf_data	*board = dev->platform_data;
 	struct platform_device	*pdev = to_platform_device(dev);
+	struct resource		*io;
 	unsigned int		csa;
 	int			status;
 
 	if (!board || !board->det_pin || !board->rst_pin)
 		return -ENODEV;
 
+	io = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!io)
+		return -ENODEV;
+
 	cf = kcalloc(1, sizeof *cf, GFP_KERNEL);
 	if (!cf)
 		return -ENOMEM;
@@ -250,10 +256,14 @@ static int __init at91_cf_probe(struct device *dev)
 	 * REVISIT:  these timings are in terms of MCK cycles, so
 	 * when MCK changes (cpufreq etc) so must these values...
 	 */
-	at91_sys_write(AT91_SMC_CSR(4), AT91_SMC_ACSS_STD | AT91_SMC_DBW_16 | AT91_SMC_BAT | AT91_SMC_WSEN
-				| AT91_SMC_NWS_(32)		/* wait states */
-				| AT91_SMC_RWSETUP_(6)		/* setup time */
-				| AT91_SMC_RWHOLD_(4)		/* hold time */
+	at91_sys_write(AT91_SMC_CSR(4),
+				  AT91_SMC_ACSS_STD
+				| AT91_SMC_DBW_16
+				| AT91_SMC_BAT
+				| AT91_SMC_WSEN
+				| AT91_SMC_NWS_(32)	/* wait states */
+				| AT91_SMC_RWSETUP_(6)	/* setup time */
+				| AT91_SMC_RWHOLD_(4)	/* hold time */
 	);
 
 	/* must be a GPIO; ergo must trigger on both edges */
@@ -274,8 +284,7 @@ static int __init at91_cf_probe(struct device *dev)
 		if (status < 0)
 			goto fail0a;
 		cf->socket.pci_irq = board->irq_pin;
-	}
-	else
+	} else
 		cf->socket.pci_irq = NR_IRQS + 1;
 
 	/* pcmcia layer only remaps "real" memory not iospace */
@@ -284,7 +293,8 @@ static int __init at91_cf_probe(struct device *dev)
 		goto fail1;
 
 	/* reserve CS4, CS5, and CS6 regions; but use just CS4 */
-	if (!request_mem_region(AT91_CF_BASE, CF_SIZE, driver_name))
+	if (!request_mem_region(io->start, io->end + 1 - io->start,
+				driver_name))
 		goto fail1;
 
 	pr_info("%s: irqs det #%d, io #%d\n", driver_name,
@@ -297,7 +307,7 @@ static int __init at91_cf_probe(struct device *dev)
 	cf->socket.features = SS_CAP_PCCARD | SS_CAP_STATIC_MAP
 				| SS_CAP_MEM_ALIGN;
 	cf->socket.map_size = SZ_2K;
-	cf->socket.io[0].NumPorts = SZ_2K;
+	cf->socket.io[0].res = io;
 
 	status = pcmcia_register_socket(&cf->socket);
 	if (status < 0)
@@ -307,7 +317,7 @@ static int __init at91_cf_probe(struct device *dev)
 
 fail2:
 	iounmap((void __iomem *) cf->socket.io_offset);
-	release_mem_region(AT91_CF_BASE, CF_SIZE);
+	release_mem_region(io->start, io->end + 1 - io->start);
 fail1:
 	if (board->irq_pin)
 		free_irq(board->irq_pin, cf);
@@ -321,14 +331,15 @@ fail0:
 
 static int __exit at91_cf_remove(struct device *dev)
 {
-	struct at91_cf_socket *cf = dev_get_drvdata(dev);
-	unsigned int csa;
+	struct at91_cf_socket	*cf = dev_get_drvdata(dev);
+	struct resource		*io = cf->socket.io[0].res;
+	unsigned int		csa;
 
 	pcmcia_unregister_socket(&cf->socket);
 	free_irq(cf->board->irq_pin, cf);
 	free_irq(cf->board->det_pin, cf);
 	iounmap((void __iomem *) cf->socket.io_offset);
-	release_mem_region(AT91_CF_BASE, CF_SIZE);
+	release_mem_region(io->start, io->end + 1 - io->start);
 
 	csa = at91_sys_read(AT91_EBI_CSA);
 	at91_sys_write(AT91_EBI_CSA, csa & ~AT91_EBI_CS4A);
@@ -342,8 +353,8 @@ static struct device_driver at91_cf_driver = {
 	.bus		= &platform_bus_type,
 	.probe		= at91_cf_probe,
 	.remove		= __exit_p(at91_cf_remove),
-	.suspend 	= pcmcia_socket_dev_suspend,
-	.resume 	= pcmcia_socket_dev_resume,
+	.suspend	= pcmcia_socket_dev_suspend,
+	.resume		= pcmcia_socket_dev_resume,
 };
 
 /*--------------------------------------------------------------------------*/
diff --git a/drivers/pcmcia/ds.c b/drivers/pcmcia/ds.c
index ae10d1eed65e..74b3124e8247 100644
--- a/drivers/pcmcia/ds.c
+++ b/drivers/pcmcia/ds.c
@@ -236,11 +236,11 @@ static void pcmcia_check_driver(struct pcmcia_driver *p_drv)
 /**
  * pcmcia_load_firmware - load CIS from userspace if device-provided is broken
  * @dev - the pcmcia device which needs a CIS override
- * @filename - requested filename in /lib/firmware/cis/
+ * @filename - requested filename in /lib/firmware/
  *
  * This uses the in-kernel firmware loading mechanism to use a "fake CIS" if
  * the one provided by the card is broken. The firmware files reside in
- * /lib/firmware/cis/ in userspace.
+ * /lib/firmware/ in userspace.
  */
 static int pcmcia_load_firmware(struct pcmcia_device *dev, char * filename)
 {
@@ -298,9 +298,6 @@ static inline int pcmcia_load_firmware(struct pcmcia_device *dev, char * filenam
  *
  * Registers a PCMCIA driver with the PCMCIA bus core.
  */
-static int pcmcia_device_probe(struct device *dev);
-static int pcmcia_device_remove(struct device * dev);
-
 int pcmcia_register_driver(struct pcmcia_driver *driver)
 {
 	if (!driver)
@@ -400,7 +397,7 @@ static int pcmcia_device_probe(struct device * dev)
 	 * call which will then check whether there are two
 	 * pseudo devices, and if not, add the second one.
 	 */
-	did = (struct pcmcia_device_id *) p_dev->dev.driver_data;
+	did = p_dev->dev.driver_data;
 	if (did && (did->match_flags & PCMCIA_DEV_ID_MATCH_DEVICE_NO) &&
 	    (p_dev->socket->device_count == 1) && (p_dev->device_no == 0))
 		pcmcia_add_pseudo_device(p_dev->socket);
@@ -448,7 +445,6 @@ static void pcmcia_card_remove(struct pcmcia_socket *s, struct pcmcia_device *le
 	return;
 }
 
-
 static int pcmcia_device_remove(struct device * dev)
 {
 	struct pcmcia_device *p_dev;
@@ -463,7 +459,7 @@ static int pcmcia_device_remove(struct device * dev)
 	 * pseudo multi-function card, we need to unbind
 	 * all devices
 	 */
-	did = (struct pcmcia_device_id *) p_dev->dev.driver_data;
+	did = p_dev->dev.driver_data;
 	if (did && (did->match_flags & PCMCIA_DEV_ID_MATCH_DEVICE_NO) &&
 	    (p_dev->socket->device_count != 0) &&
 	    (p_dev->device_no == 0))
@@ -476,6 +472,8 @@ static int pcmcia_device_remove(struct device * dev)
 	if (p_drv->remove)
 	       	p_drv->remove(p_dev);
 
+	p_dev->dev_node = NULL;
+
 	/* check for proper unloading */
 	if (p_dev->_irq || p_dev->_io || p_dev->_locked)
 		printk(KERN_INFO "pcmcia: driver %s did not release config properly\n",
@@ -628,7 +626,7 @@ struct pcmcia_device * pcmcia_device_add(struct pcmcia_socket *s, unsigned int f
 		}
 
 	/* Add to the list in pcmcia_bus_socket */
-	list_add_tail(&p_dev->socket_device_list, &s->devices_list);
+	list_add(&p_dev->socket_device_list, &s->devices_list);
 
 	spin_unlock_irqrestore(&pcmcia_dev_list_lock, flags);
 
@@ -1145,6 +1143,12 @@ static int ds_event(struct pcmcia_socket *skt, event_t event, int priority)
 {
 	struct pcmcia_socket *s = pcmcia_get_socket(skt);
 
+	if (!s) {
+		printk(KERN_ERR "PCMCIA obtaining reference to socket %p " \
+			"failed, event 0x%x lost!\n", skt, event);
+		return -ENODEV;
+	}
+
 	ds_dbg(1, "ds_event(0x%06x, %d, 0x%p)\n",
 	       event, priority, skt);
 
diff --git a/drivers/pcmcia/i82365.c b/drivers/pcmcia/i82365.c
index bd0308e89815..a2f05f485156 100644
--- a/drivers/pcmcia/i82365.c
+++ b/drivers/pcmcia/i82365.c
@@ -509,7 +509,8 @@ static irqreturn_t i365_count_irq(int irq, void *dev, struct pt_regs *regs)
 static u_int __init test_irq(u_short sock, int irq)
 {
     debug(2, "  testing ISA irq %d\n", irq);
-    if (request_irq(irq, i365_count_irq, 0, "scan", i365_count_irq) != 0)
+    if (request_irq(irq, i365_count_irq, SA_PROBEIRQ, "scan",
+			i365_count_irq) != 0)
 	return 1;
     irq_hits = 0; irq_sock = sock;
     msleep(10);
@@ -561,7 +562,7 @@ static u_int __init isa_scan(u_short sock, u_int mask0)
     } else {
 	/* Fallback: just find interrupts that aren't in use */
 	for (i = 0; i < 16; i++)
-	    if ((mask0 & (1 << i)) && (_check_irq(i, 0) == 0))
+	    if ((mask0 & (1 << i)) && (_check_irq(i, SA_PROBEIRQ) == 0))
 		mask1 |= (1 << i);
 	printk("default");
 	/* If scan failed, default to polled status */
@@ -725,7 +726,7 @@ static void __init add_pcic(int ns, int type)
 	u_int cs_mask = mask & ((cs_irq) ? (1<<cs_irq) : ~(1<<12));
 	for (cs_irq = 15; cs_irq > 0; cs_irq--)
 	    if ((cs_mask & (1 << cs_irq)) &&
-		(_check_irq(cs_irq, 0) == 0))
+		(_check_irq(cs_irq, SA_PROBEIRQ) == 0))
 		break;
 	if (cs_irq) {
 	    grab_irq = 1;
diff --git a/drivers/pcmcia/pcmcia_ioctl.c b/drivers/pcmcia/pcmcia_ioctl.c
index c53db7ceda5e..738b1ef595a3 100644
--- a/drivers/pcmcia/pcmcia_ioctl.c
+++ b/drivers/pcmcia/pcmcia_ioctl.c
@@ -426,7 +426,7 @@ static int ds_open(struct inode *inode, struct file *file)
 
     if (!warning_printed) {
 	    printk(KERN_INFO "pcmcia: Detected deprecated PCMCIA ioctl "
-			"usage.\n");
+			"usage from process: %s.\n", current->comm);
 	    printk(KERN_INFO "pcmcia: This interface will soon be removed from "
 			"the kernel; please expect breakage unless you upgrade "
 			"to new tools.\n");
@@ -601,8 +601,12 @@ static int ds_ioctl(struct inode * inode, struct file * file,
 	    ret = CS_BAD_ARGS;
 	else {
 	    struct pcmcia_device *p_dev = get_pcmcia_device(s, buf->config.Function);
-	    ret = pccard_get_configuration_info(s, p_dev, &buf->config);
-	    pcmcia_put_dev(p_dev);
+	    if (p_dev == NULL)
+		    ret = CS_BAD_ARGS;
+	    else {
+		    ret = pccard_get_configuration_info(s, p_dev, &buf->config);
+		    pcmcia_put_dev(p_dev);
+	    }
 	}
 	break;
     case DS_GET_FIRST_TUPLE:
@@ -632,8 +636,12 @@ static int ds_ioctl(struct inode * inode, struct file * file,
 		    ret = CS_BAD_ARGS;
 	    else {
 		    struct pcmcia_device *p_dev = get_pcmcia_device(s, buf->status.Function);
-		    ret = pccard_get_status(s, p_dev, &buf->status);
-		    pcmcia_put_dev(p_dev);
+		    if (p_dev == NULL)
+			    ret = CS_BAD_ARGS;
+		    else {
+			    ret = pccard_get_status(s, p_dev, &buf->status);
+			    pcmcia_put_dev(p_dev);
+		    }
 	    }
 	    break;
     case DS_VALIDATE_CIS:
@@ -665,9 +673,10 @@ static int ds_ioctl(struct inode * inode, struct file * file,
 	if (!(buf->conf_reg.Function &&
 	     (buf->conf_reg.Function >= s->functions))) {
 		struct pcmcia_device *p_dev = get_pcmcia_device(s, buf->conf_reg.Function);
-		if (p_dev)
+		if (p_dev) {
 			ret = pcmcia_access_configuration_register(p_dev, &buf->conf_reg);
-		pcmcia_put_dev(p_dev);
+			pcmcia_put_dev(p_dev);
+		}
 	}
 	break;
     case DS_GET_FIRST_REGION:
diff --git a/drivers/pcmcia/pcmcia_resource.c b/drivers/pcmcia/pcmcia_resource.c
index 45063b4e5b78..3131bb0a0095 100644
--- a/drivers/pcmcia/pcmcia_resource.c
+++ b/drivers/pcmcia/pcmcia_resource.c
@@ -88,7 +88,6 @@ static int alloc_io_space(struct pcmcia_socket *s, u_int attr, ioaddr_t *base,
 	}
 	if ((s->features & SS_CAP_STATIC_MAP) && s->io_offset) {
 		*base = s->io_offset | (*base & 0x0fff);
-		s->io[0].res->flags = (s->io[0].res->flags & ~IORESOURCE_BITS) | (attr & IORESOURCE_BITS);
 		return 0;
 	}
 	/* Check for an already-allocated window that must conflict with
@@ -209,7 +208,6 @@ int pccard_get_configuration_info(struct pcmcia_socket *s,
 	if (!(s->state & SOCKET_PRESENT))
 		return CS_NO_CARD;
 
-	config->Function = p_dev->func;
 
 #ifdef CONFIG_CARDBUS
 	if (s->state & SOCKET_CARDBUS) {
@@ -223,14 +221,22 @@ int pccard_get_configuration_info(struct pcmcia_socket *s,
 			config->AssignedIRQ = s->irq.AssignedIRQ;
 			if (config->AssignedIRQ)
 				config->Attributes |= CONF_ENABLE_IRQ;
-			config->BasePort1 = s->io[0].res->start;
-			config->NumPorts1 = s->io[0].res->end - config->BasePort1 + 1;
+			if (s->io[0].res) {
+				config->BasePort1 = s->io[0].res->start;
+				config->NumPorts1 = s->io[0].res->end - config->BasePort1 + 1;
+			}
 		}
 		return CS_SUCCESS;
 	}
 #endif
 
-	c = (p_dev) ? p_dev->function_config : NULL;
+	if (p_dev) {
+		c = p_dev->function_config;
+		config->Function = p_dev->func;
+	} else {
+		c = NULL;
+		config->Function = 0;
+	}
 
 	if ((c == NULL) || !(c->state & CONFIG_LOCKED)) {
 		config->Attributes = 0;
@@ -947,7 +953,5 @@ void pcmcia_disable_device(struct pcmcia_device *p_dev) {
 	pcmcia_release_irq(p_dev, &p_dev->irq);
 	if (&p_dev->win)
 		pcmcia_release_window(p_dev->win);
-
-	p_dev->dev_node = NULL;
 }
 EXPORT_SYMBOL(pcmcia_disable_device);
diff --git a/drivers/pcmcia/pd6729.c b/drivers/pcmcia/pd6729.c
index 16d1ea7b0a18..247ab837f841 100644
--- a/drivers/pcmcia/pd6729.c
+++ b/drivers/pcmcia/pd6729.c
@@ -589,7 +589,7 @@ static int pd6729_check_irq(int irq, int flags)
 	return 0;
 }
 
-static u_int __init pd6729_isa_scan(void)
+static u_int __devinit pd6729_isa_scan(void)
 {
 	u_int mask0, mask = 0;
 	int i;
diff --git a/drivers/pcmcia/pxa2xx_sharpsl.c b/drivers/pcmcia/pxa2xx_sharpsl.c
index fd3647368955..b7b9e149c5b9 100644
--- a/drivers/pcmcia/pxa2xx_sharpsl.c
+++ b/drivers/pcmcia/pxa2xx_sharpsl.c
@@ -26,14 +26,6 @@
 #include "soc_common.h"
 
 #define	NO_KEEP_VS 0x0001
-
-/* PCMCIA to Scoop linkage
-
-   There is no easy way to link multiple scoop devices into one
-   single entity for the pxa2xx_pcmcia device so this structure
-   is used which is setup by the platform code
-*/
-struct scoop_pcmcia_config *platform_scoop_config;
 #define SCOOP_DEV platform_scoop_config->devs
 
 static void sharpsl_pcmcia_init_reset(struct soc_pcmcia_socket *skt)
diff --git a/drivers/pnp/manager.c b/drivers/pnp/manager.c
index c4256aa32bcb..6fff109bdab6 100644
--- a/drivers/pnp/manager.c
+++ b/drivers/pnp/manager.c
@@ -479,7 +479,7 @@ int pnp_auto_config_dev(struct pnp_dev *dev)
 int pnp_start_dev(struct pnp_dev *dev)
 {
 	if (!pnp_can_write(dev)) {
-		pnp_info("Device %s does not supported activation.", dev->dev.bus_id);
+		pnp_info("Device %s does not support activation.", dev->dev.bus_id);
 		return -EINVAL;
 	}
 
@@ -503,7 +503,7 @@ int pnp_start_dev(struct pnp_dev *dev)
 int pnp_stop_dev(struct pnp_dev *dev)
 {
 	if (!pnp_can_disable(dev)) {
-		pnp_info("Device %s does not supported disabling.", dev->dev.bus_id);
+		pnp_info("Device %s does not support disabling.", dev->dev.bus_id);
 		return -EINVAL;
 	}
 	if (dev->protocol->disable(dev)<0) {
diff --git a/drivers/rtc/rtc-dev.c b/drivers/rtc/rtc-dev.c
index b1e3e6179e56..2011567005f9 100644
--- a/drivers/rtc/rtc-dev.c
+++ b/drivers/rtc/rtc-dev.c
@@ -58,7 +58,7 @@ rtc_dev_read(struct file *file, char __user *buf, size_t count, loff_t *ppos)
 	unsigned long data;
 	ssize_t ret;
 
-	if (count < sizeof(unsigned long))
+	if (count != sizeof(unsigned int) && count < sizeof(unsigned long))
 		return -EINVAL;
 
 	add_wait_queue(&rtc->irq_queue, &wait);
@@ -90,11 +90,16 @@ rtc_dev_read(struct file *file, char __user *buf, size_t count, loff_t *ppos)
 	if (ret == 0) {
 		/* Check for any data updates */
 		if (rtc->ops->read_callback)
-			data = rtc->ops->read_callback(rtc->class_dev.dev, data);
-
-		ret = put_user(data, (unsigned long __user *)buf);
-		if (ret == 0)
-			ret = sizeof(unsigned long);
+			data = rtc->ops->read_callback(rtc->class_dev.dev,
+						       data);
+
+		if (sizeof(int) != sizeof(long) &&
+		    count == sizeof(unsigned int))
+			ret = put_user(data, (unsigned int __user *)buf) ?:
+				sizeof(unsigned int);
+		else
+			ret = put_user(data, (unsigned long __user *)buf) ?:
+				sizeof(unsigned long);
 	}
 	return ret;
 }
@@ -136,13 +141,13 @@ static int rtc_dev_ioctl(struct inode *inode, struct file *file,
 	/* try the driver's ioctl interface */
 	if (ops->ioctl) {
 		err = ops->ioctl(class_dev->dev, cmd, arg);
-		if (err != -EINVAL)
+		if (err != -ENOIOCTLCMD)
 			return err;
 	}
 
 	/* if the driver does not provide the ioctl interface
 	 * or if that particular ioctl was not implemented
-	 * (-EINVAL), we will try to emulate here.
+	 * (-ENOIOCTLCMD), we will try to emulate here.
 	 */
 
 	switch (cmd) {
@@ -228,7 +233,7 @@ static int rtc_dev_ioctl(struct inode *inode, struct file *file,
 		break;
 
 	default:
-		err = -EINVAL;
+		err = -ENOTTY;
 		break;
 	}
 
diff --git a/drivers/rtc/rtc-m48t86.c b/drivers/rtc/rtc-m48t86.c
index f6e7ee04f3dc..8c0d1a6739ad 100644
--- a/drivers/rtc/rtc-m48t86.c
+++ b/drivers/rtc/rtc-m48t86.c
@@ -48,33 +48,33 @@ static int m48t86_rtc_read_time(struct device *dev, struct rtc_time *tm)
 	struct platform_device *pdev = to_platform_device(dev);
 	struct m48t86_ops *ops = pdev->dev.platform_data;
 
-	reg = ops->readb(M48T86_REG_B);
+	reg = ops->readbyte(M48T86_REG_B);
 
 	if (reg & M48T86_REG_B_DM) {
 		/* data (binary) mode */
-		tm->tm_sec	= ops->readb(M48T86_REG_SEC);
-		tm->tm_min	= ops->readb(M48T86_REG_MIN);
-		tm->tm_hour	= ops->readb(M48T86_REG_HOUR) & 0x3F;
-		tm->tm_mday	= ops->readb(M48T86_REG_DOM);
+		tm->tm_sec	= ops->readbyte(M48T86_REG_SEC);
+		tm->tm_min	= ops->readbyte(M48T86_REG_MIN);
+		tm->tm_hour	= ops->readbyte(M48T86_REG_HOUR) & 0x3F;
+		tm->tm_mday	= ops->readbyte(M48T86_REG_DOM);
 		/* tm_mon is 0-11 */
-		tm->tm_mon	= ops->readb(M48T86_REG_MONTH) - 1;
-		tm->tm_year	= ops->readb(M48T86_REG_YEAR) + 100;
-		tm->tm_wday	= ops->readb(M48T86_REG_DOW);
+		tm->tm_mon	= ops->readbyte(M48T86_REG_MONTH) - 1;
+		tm->tm_year	= ops->readbyte(M48T86_REG_YEAR) + 100;
+		tm->tm_wday	= ops->readbyte(M48T86_REG_DOW);
 	} else {
 		/* bcd mode */
-		tm->tm_sec	= BCD2BIN(ops->readb(M48T86_REG_SEC));
-		tm->tm_min	= BCD2BIN(ops->readb(M48T86_REG_MIN));
-		tm->tm_hour	= BCD2BIN(ops->readb(M48T86_REG_HOUR) & 0x3F);
-		tm->tm_mday	= BCD2BIN(ops->readb(M48T86_REG_DOM));
+		tm->tm_sec	= BCD2BIN(ops->readbyte(M48T86_REG_SEC));
+		tm->tm_min	= BCD2BIN(ops->readbyte(M48T86_REG_MIN));
+		tm->tm_hour	= BCD2BIN(ops->readbyte(M48T86_REG_HOUR) & 0x3F);
+		tm->tm_mday	= BCD2BIN(ops->readbyte(M48T86_REG_DOM));
 		/* tm_mon is 0-11 */
-		tm->tm_mon	= BCD2BIN(ops->readb(M48T86_REG_MONTH)) - 1;
-		tm->tm_year	= BCD2BIN(ops->readb(M48T86_REG_YEAR)) + 100;
-		tm->tm_wday	= BCD2BIN(ops->readb(M48T86_REG_DOW));
+		tm->tm_mon	= BCD2BIN(ops->readbyte(M48T86_REG_MONTH)) - 1;
+		tm->tm_year	= BCD2BIN(ops->readbyte(M48T86_REG_YEAR)) + 100;
+		tm->tm_wday	= BCD2BIN(ops->readbyte(M48T86_REG_DOW));
 	}
 
 	/* correct the hour if the clock is in 12h mode */
 	if (!(reg & M48T86_REG_B_H24))
-		if (ops->readb(M48T86_REG_HOUR) & 0x80)
+		if (ops->readbyte(M48T86_REG_HOUR) & 0x80)
 			tm->tm_hour += 12;
 
 	return 0;
@@ -86,35 +86,35 @@ static int m48t86_rtc_set_time(struct device *dev, struct rtc_time *tm)
 	struct platform_device *pdev = to_platform_device(dev);
 	struct m48t86_ops *ops = pdev->dev.platform_data;
 
-	reg = ops->readb(M48T86_REG_B);
+	reg = ops->readbyte(M48T86_REG_B);
 
 	/* update flag and 24h mode */
 	reg |= M48T86_REG_B_SET | M48T86_REG_B_H24;
-	ops->writeb(reg, M48T86_REG_B);
+	ops->writebyte(reg, M48T86_REG_B);
 
 	if (reg & M48T86_REG_B_DM) {
 		/* data (binary) mode */
-		ops->writeb(tm->tm_sec, M48T86_REG_SEC);
-		ops->writeb(tm->tm_min, M48T86_REG_MIN);
-		ops->writeb(tm->tm_hour, M48T86_REG_HOUR);
-		ops->writeb(tm->tm_mday, M48T86_REG_DOM);
-		ops->writeb(tm->tm_mon + 1, M48T86_REG_MONTH);
-		ops->writeb(tm->tm_year % 100, M48T86_REG_YEAR);
-		ops->writeb(tm->tm_wday, M48T86_REG_DOW);
+		ops->writebyte(tm->tm_sec, M48T86_REG_SEC);
+		ops->writebyte(tm->tm_min, M48T86_REG_MIN);
+		ops->writebyte(tm->tm_hour, M48T86_REG_HOUR);
+		ops->writebyte(tm->tm_mday, M48T86_REG_DOM);
+		ops->writebyte(tm->tm_mon + 1, M48T86_REG_MONTH);
+		ops->writebyte(tm->tm_year % 100, M48T86_REG_YEAR);
+		ops->writebyte(tm->tm_wday, M48T86_REG_DOW);
 	} else {
 		/* bcd mode */
-		ops->writeb(BIN2BCD(tm->tm_sec), M48T86_REG_SEC);
-		ops->writeb(BIN2BCD(tm->tm_min), M48T86_REG_MIN);
-		ops->writeb(BIN2BCD(tm->tm_hour), M48T86_REG_HOUR);
-		ops->writeb(BIN2BCD(tm->tm_mday), M48T86_REG_DOM);
-		ops->writeb(BIN2BCD(tm->tm_mon + 1), M48T86_REG_MONTH);
-		ops->writeb(BIN2BCD(tm->tm_year % 100), M48T86_REG_YEAR);
-		ops->writeb(BIN2BCD(tm->tm_wday), M48T86_REG_DOW);
+		ops->writebyte(BIN2BCD(tm->tm_sec), M48T86_REG_SEC);
+		ops->writebyte(BIN2BCD(tm->tm_min), M48T86_REG_MIN);
+		ops->writebyte(BIN2BCD(tm->tm_hour), M48T86_REG_HOUR);
+		ops->writebyte(BIN2BCD(tm->tm_mday), M48T86_REG_DOM);
+		ops->writebyte(BIN2BCD(tm->tm_mon + 1), M48T86_REG_MONTH);
+		ops->writebyte(BIN2BCD(tm->tm_year % 100), M48T86_REG_YEAR);
+		ops->writebyte(BIN2BCD(tm->tm_wday), M48T86_REG_DOW);
 	}
 
 	/* update ended */
 	reg &= ~M48T86_REG_B_SET;
-	ops->writeb(reg, M48T86_REG_B);
+	ops->writebyte(reg, M48T86_REG_B);
 
 	return 0;
 }
@@ -125,12 +125,12 @@ static int m48t86_rtc_proc(struct device *dev, struct seq_file *seq)
 	struct platform_device *pdev = to_platform_device(dev);
 	struct m48t86_ops *ops = pdev->dev.platform_data;
 
-	reg = ops->readb(M48T86_REG_B);
+	reg = ops->readbyte(M48T86_REG_B);
 
 	seq_printf(seq, "mode\t\t: %s\n",
 		 (reg & M48T86_REG_B_DM) ? "binary" : "bcd");
 
-	reg = ops->readb(M48T86_REG_D);
+	reg = ops->readbyte(M48T86_REG_D);
 
 	seq_printf(seq, "battery\t\t: %s\n",
 		 (reg & M48T86_REG_D_VRT) ? "ok" : "exhausted");
@@ -157,7 +157,7 @@ static int __devinit m48t86_rtc_probe(struct platform_device *dev)
 	platform_set_drvdata(dev, rtc);
 
 	/* read battery status */
-	reg = ops->readb(M48T86_REG_D);
+	reg = ops->readbyte(M48T86_REG_D);
 	dev_info(&dev->dev, "battery %s\n",
 		(reg & M48T86_REG_D_VRT) ? "ok" : "exhausted");
 
diff --git a/drivers/rtc/rtc-sa1100.c b/drivers/rtc/rtc-sa1100.c
index a23ec54989f6..a997529f8926 100644
--- a/drivers/rtc/rtc-sa1100.c
+++ b/drivers/rtc/rtc-sa1100.c
@@ -178,9 +178,9 @@ static int sa1100_rtc_open(struct device *dev)
 	return 0;
 
  fail_pi:
-	free_irq(IRQ_RTCAlrm, NULL);
+	free_irq(IRQ_RTCAlrm, dev);
  fail_ai:
-	free_irq(IRQ_RTC1Hz, NULL);
+	free_irq(IRQ_RTC1Hz, dev);
  fail_ui:
 	return ret;
 }
@@ -247,7 +247,7 @@ static int sa1100_rtc_ioctl(struct device *dev, unsigned int cmd,
 		rtc_freq = arg;
 		return 0;
 	}
-	return -EINVAL;
+	return -ENOIOCTLCMD;
 }
 
 static int sa1100_rtc_read_time(struct device *dev, struct rtc_time *tm)
@@ -295,7 +295,7 @@ static int sa1100_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
 
 static int sa1100_rtc_proc(struct device *dev, struct seq_file *seq)
 {
-	seq_printf(seq, "trim/divider\t: 0x%08x\n", RTTR);
+	seq_printf(seq, "trim/divider\t: 0x%08lx\n", RTTR);
 	seq_printf(seq, "alarm_IRQ\t: %s\n",
 			(RTSR & RTSR_ALE) ? "yes" : "no" );
 	seq_printf(seq, "update_IRQ\t: %s\n",
diff --git a/drivers/rtc/rtc-test.c b/drivers/rtc/rtc-test.c
index e1f7e8e86daf..e1fa5fe7901f 100644
--- a/drivers/rtc/rtc-test.c
+++ b/drivers/rtc/rtc-test.c
@@ -71,7 +71,7 @@ static int test_rtc_ioctl(struct device *dev, unsigned int cmd,
 		return 0;
 
 	default:
-		return -EINVAL;
+		return -ENOIOCTLCMD;
 	}
 }
 
diff --git a/drivers/rtc/rtc-vr41xx.c b/drivers/rtc/rtc-vr41xx.c
index 4d49fd501198..277596c302e3 100644
--- a/drivers/rtc/rtc-vr41xx.c
+++ b/drivers/rtc/rtc-vr41xx.c
@@ -270,7 +270,7 @@ static int vr41xx_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long
 		epoch = arg;
 		break;
 	default:
-		return -EINVAL;
+		return -ENOIOCTLCMD;
 	}
 
 	return 0;
diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c
index a3bfebcf31ef..cfb1fff3787c 100644
--- a/drivers/s390/block/dasd.c
+++ b/drivers/s390/block/dasd.c
@@ -315,6 +315,11 @@ dasd_increase_state(struct dasd_device *device)
 		rc = dasd_state_basic_to_ready(device);
 
 	if (!rc &&
+	    device->state == DASD_STATE_UNFMT &&
+	    device->target > DASD_STATE_UNFMT)
+		rc = -EPERM;
+
+	if (!rc &&
 	    device->state == DASD_STATE_READY &&
 	    device->target >= DASD_STATE_ONLINE)
 		rc = dasd_state_ready_to_online(device);
diff --git a/drivers/s390/block/dasd_devmap.c b/drivers/s390/block/dasd_devmap.c
index c1c6f1381150..216bc4fba199 100644
--- a/drivers/s390/block/dasd_devmap.c
+++ b/drivers/s390/block/dasd_devmap.c
@@ -45,6 +45,7 @@ struct dasd_devmap {
         unsigned int devindex;
         unsigned short features;
 	struct dasd_device *device;
+	struct dasd_uid uid;
 };
 
 /*
@@ -716,6 +717,68 @@ dasd_discipline_show(struct device *dev, struct device_attribute *attr, char *bu
 
 static DEVICE_ATTR(discipline, 0444, dasd_discipline_show, NULL);
 
+static ssize_t
+dasd_alias_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct dasd_devmap *devmap;
+	int alias;
+
+	devmap = dasd_find_busid(dev->bus_id);
+	spin_lock(&dasd_devmap_lock);
+	if (!IS_ERR(devmap))
+		alias = devmap->uid.alias;
+	else
+		alias = 0;
+	spin_unlock(&dasd_devmap_lock);
+
+	return sprintf(buf, alias ? "1\n" : "0\n");
+}
+
+static DEVICE_ATTR(alias, 0444, dasd_alias_show, NULL);
+
+static ssize_t
+dasd_vendor_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct dasd_devmap *devmap;
+	char *vendor;
+
+	devmap = dasd_find_busid(dev->bus_id);
+	spin_lock(&dasd_devmap_lock);
+	if (!IS_ERR(devmap) && strlen(devmap->uid.vendor) > 0)
+		vendor = devmap->uid.vendor;
+	else
+		vendor = "";
+	spin_unlock(&dasd_devmap_lock);
+
+	return snprintf(buf, PAGE_SIZE, "%s\n", vendor);
+}
+
+static DEVICE_ATTR(vendor, 0444, dasd_vendor_show, NULL);
+
+#define UID_STRLEN ( /* vendor */ 3 + 1 + /* serial    */ 14 + 1 +\
+		     /* SSID   */ 4 + 1 + /* unit addr */ 2 + 1)
+
+static ssize_t
+dasd_uid_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct dasd_devmap *devmap;
+	char uid[UID_STRLEN];
+
+	devmap = dasd_find_busid(dev->bus_id);
+	spin_lock(&dasd_devmap_lock);
+	if (!IS_ERR(devmap) && strlen(devmap->uid.vendor) > 0)
+		snprintf(uid, sizeof(uid), "%s.%s.%04x.%02x",
+			 devmap->uid.vendor, devmap->uid.serial,
+			 devmap->uid.ssid, devmap->uid.unit_addr);
+	else
+		uid[0] = 0;
+	spin_unlock(&dasd_devmap_lock);
+
+	return snprintf(buf, PAGE_SIZE, "%s\n", uid);
+}
+
+static DEVICE_ATTR(uid, 0444, dasd_uid_show, NULL);
+
 /*
  * extended error-reporting
  */
@@ -759,6 +822,9 @@ static DEVICE_ATTR(eer_enabled, 0644, dasd_eer_show, dasd_eer_store);
 static struct attribute * dasd_attrs[] = {
 	&dev_attr_readonly.attr,
 	&dev_attr_discipline.attr,
+	&dev_attr_alias.attr,
+	&dev_attr_vendor.attr,
+	&dev_attr_uid.attr,
 	&dev_attr_use_diag.attr,
 	&dev_attr_eer_enabled.attr,
 	NULL,
@@ -768,6 +834,42 @@ static struct attribute_group dasd_attr_group = {
 	.attrs = dasd_attrs,
 };
 
+
+/*
+ * Return copy of the device unique identifier.
+ */
+int
+dasd_get_uid(struct ccw_device *cdev, struct dasd_uid *uid)
+{
+	struct dasd_devmap *devmap;
+
+	devmap = dasd_find_busid(cdev->dev.bus_id);
+	if (IS_ERR(devmap))
+		return PTR_ERR(devmap);
+	spin_lock(&dasd_devmap_lock);
+	*uid = devmap->uid;
+	spin_unlock(&dasd_devmap_lock);
+	return 0;
+}
+
+/*
+ * Register the given device unique identifier into devmap struct.
+ */
+int
+dasd_set_uid(struct ccw_device *cdev, struct dasd_uid *uid)
+{
+	struct dasd_devmap *devmap;
+
+	devmap = dasd_find_busid(cdev->dev.bus_id);
+	if (IS_ERR(devmap))
+		return PTR_ERR(devmap);
+	spin_lock(&dasd_devmap_lock);
+	devmap->uid = *uid;
+	spin_unlock(&dasd_devmap_lock);
+	return 0;
+}
+EXPORT_SYMBOL(dasd_set_uid);
+
 /*
  * Return value of the specified feature.
  */
diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c
index ee09ef33d08d..7d5a6cee4bd8 100644
--- a/drivers/s390/block/dasd_eckd.c
+++ b/drivers/s390/block/dasd_eckd.c
@@ -446,6 +446,39 @@ dasd_eckd_cdl_reclen(int recid)
 	return LABEL_SIZE;
 }
 
+/*
+ * Generate device unique id that specifies the physical device.
+ */
+static int
+dasd_eckd_generate_uid(struct dasd_device *device, struct dasd_uid *uid)
+{
+	struct dasd_eckd_private *private;
+	struct dasd_eckd_confdata *confdata;
+
+	private = (struct dasd_eckd_private *) device->private;
+	if (!private)
+		return -ENODEV;
+	confdata = &private->conf_data;
+	if (!confdata)
+		return -ENODEV;
+
+	memset(uid, 0, sizeof(struct dasd_uid));
+	strncpy(uid->vendor, confdata->ned1.HDA_manufacturer,
+		sizeof(uid->vendor) - 1);
+	EBCASC(uid->vendor, sizeof(uid->vendor) - 1);
+	strncpy(uid->serial, confdata->ned1.HDA_location,
+		sizeof(uid->serial) - 1);
+	EBCASC(uid->serial, sizeof(uid->serial) - 1);
+	uid->ssid = confdata->neq.subsystemID;
+	if (confdata->ned2.sneq.flags == 0x40) {
+		uid->alias = 1;
+		uid->unit_addr = confdata->ned2.sneq.base_unit_addr;
+	} else
+		uid->unit_addr = confdata->ned1.unit_addr;
+
+	return 0;
+}
+
 static int
 dasd_eckd_read_conf(struct dasd_device *device)
 {
@@ -507,11 +540,15 @@ dasd_eckd_read_conf(struct dasd_device *device)
 	return 0;
 }
 
-
+/*
+ * Check device characteristics.
+ * If the device is accessible using ECKD discipline, the device is enabled.
+ */
 static int
 dasd_eckd_check_characteristics(struct dasd_device *device)
 {
 	struct dasd_eckd_private *private;
+	struct dasd_uid uid;
 	void *rdc_data;
 	int rc;
 
@@ -536,6 +573,7 @@ dasd_eckd_check_characteristics(struct dasd_device *device)
 
 	/* Read Device Characteristics */
 	rdc_data = (void *) &(private->rdc_data);
+	memset(rdc_data, 0, sizeof(rdc_data));
 	rc = read_dev_chars(device->cdev, &rdc_data, 64);
 	if (rc) {
 		DEV_MESSAGE(KERN_WARNING, device,
@@ -556,8 +594,17 @@ dasd_eckd_check_characteristics(struct dasd_device *device)
 
 	/* Read Configuration Data */
 	rc = dasd_eckd_read_conf (device);
-	return rc;
+	if (rc)
+		return rc;
+
+	/* Generate device unique id and register in devmap */
+	rc = dasd_eckd_generate_uid(device, &uid);
+	if (rc)
+		return rc;
 
+	rc = dasd_set_uid(device->cdev, &uid);
+
+	return rc;
 }
 
 static struct dasd_ccw_req *
diff --git a/drivers/s390/block/dasd_eckd.h b/drivers/s390/block/dasd_eckd.h
index ad8524bb7bb3..d5734e976e1c 100644
--- a/drivers/s390/block/dasd_eckd.h
+++ b/drivers/s390/block/dasd_eckd.h
@@ -228,26 +228,36 @@ struct dasd_eckd_confdata {
 		unsigned char HDA_manufacturer[3];
 		unsigned char HDA_location[2];
 		unsigned char HDA_seqno[12];
-		__u16 ID;
+		__u8 ID;
+		__u8 unit_addr;
 	} __attribute__ ((packed)) ned1;
-	struct {
+	union {
 		struct {
-			unsigned char identifier:2;
-			unsigned char token_id:1;
-			unsigned char sno_valid:1;
-			unsigned char subst_sno:1;
-			unsigned char recNED:1;
-			unsigned char emuNED:1;
-			unsigned char reserved:1;
-		} __attribute__ ((packed)) flags;
-		__u8 descriptor;
-		__u8 reserved[2];
-		unsigned char dev_type[6];
-		unsigned char dev_model[3];
-		unsigned char DASD_manufacturer[3];
-		unsigned char DASD_location[2];
-		unsigned char DASD_seqno[12];
-		__u16 ID;
+			struct {
+				unsigned char identifier:2;
+				unsigned char token_id:1;
+				unsigned char sno_valid:1;
+				unsigned char subst_sno:1;
+				unsigned char recNED:1;
+				unsigned char emuNED:1;
+				unsigned char reserved:1;
+			} __attribute__ ((packed)) flags;
+			__u8 descriptor;
+			__u8 reserved[2];
+			unsigned char dev_type[6];
+			unsigned char dev_model[3];
+			unsigned char DASD_manufacturer[3];
+			unsigned char DASD_location[2];
+			unsigned char DASD_seqno[12];
+			__u16 ID;
+		} __attribute__ ((packed)) ned;
+		struct {
+			unsigned char flags;            /* byte  0    */
+			unsigned char res2[7];          /* byte  1- 7 */
+			unsigned char sua_flags;	/* byte  8    */
+			__u8 base_unit_addr;            /* byte  9    */
+			unsigned char res3[22];	        /* byte 10-31 */
+		} __attribute__ ((packed)) sneq;
 	} __attribute__ ((packed)) ned2;
 	struct {
 		struct {
diff --git a/drivers/s390/block/dasd_int.h b/drivers/s390/block/dasd_int.h
index 4293ba827523..d4b13e300a76 100644
--- a/drivers/s390/block/dasd_int.h
+++ b/drivers/s390/block/dasd_int.h
@@ -268,6 +268,16 @@ struct dasd_discipline {
 
 extern struct dasd_discipline *dasd_diag_discipline_pointer;
 
+/*
+ * Unique identifier for dasd device.
+ */
+struct dasd_uid {
+	__u8 alias;
+	char vendor[4];
+	char serial[15];
+	__u16 ssid;
+	__u8 unit_addr;
+};
 
 /*
  * Notification numbers for extended error reporting notifications:
@@ -516,6 +526,8 @@ void dasd_devmap_exit(void);
 struct dasd_device *dasd_create_device(struct ccw_device *);
 void dasd_delete_device(struct dasd_device *);
 
+int dasd_get_uid(struct ccw_device *, struct dasd_uid *);
+int dasd_set_uid(struct ccw_device *, struct dasd_uid *);
 int dasd_get_feature(struct ccw_device *, int);
 int dasd_set_feature(struct ccw_device *, int, int);
 
diff --git a/drivers/s390/char/tape_3590.c b/drivers/s390/char/tape_3590.c
index c3915f60a3aa..d71ef1adea59 100644
--- a/drivers/s390/char/tape_3590.c
+++ b/drivers/s390/char/tape_3590.c
@@ -230,14 +230,16 @@ tape_3590_read_attmsg(struct tape_device *device)
  * These functions are used to schedule follow-up actions from within an
  * interrupt context (like unsolicited interrupts).
  */
+struct work_handler_data {
+	struct tape_device *device;
+	enum tape_op        op;
+	struct work_struct  work;
+};
+
 static void
 tape_3590_work_handler(void *data)
 {
-	struct {
-		struct tape_device *device;
-		enum tape_op op;
-		struct work_struct work;
-	} *p = data;
+	struct work_handler_data *p = data;
 
 	switch (p->op) {
 	case TO_MSEN:
@@ -257,11 +259,7 @@ tape_3590_work_handler(void *data)
 static int
 tape_3590_schedule_work(struct tape_device *device, enum tape_op op)
 {
-	struct {
-		struct tape_device *device;
-		enum tape_op op;
-		struct work_struct work;
-	} *p;
+	struct work_handler_data *p;
 
 	if ((p = kzalloc(sizeof(*p), GFP_ATOMIC)) == NULL)
 		return -ENOMEM;
@@ -316,7 +314,7 @@ tape_3590_bread(struct tape_device *device, struct request *req)
 
 	rq_for_each_bio(bio, req) {
 		bio_for_each_segment(bv, bio, i) {
-			dst = kmap(bv->bv_page) + bv->bv_offset;
+			dst = page_address(bv->bv_page) + bv->bv_offset;
 			for (off = 0; off < bv->bv_len;
 			     off += TAPEBLOCK_HSEC_SIZE) {
 				ccw->flags = CCW_FLAG_CC;
@@ -1168,6 +1166,7 @@ tape_3590_setup_device(struct tape_device *device)
 static void
 tape_3590_cleanup_device(struct tape_device *device)
 {
+	flush_scheduled_work();
 	tape_std_unassign(device);
 
 	kfree(device->discdata);
@@ -1234,6 +1233,7 @@ static struct tape_discipline tape_discipline_3590 = {
 
 static struct ccw_device_id tape_3590_ids[] = {
 	{CCW_DEVICE_DEVTYPE(0x3590, 0, 0x3590, 0), .driver_info = tape_3590},
+	{CCW_DEVICE_DEVTYPE(0x3592, 0, 0x3592, 0), .driver_info = tape_3592},
 	{ /* end of list */ }
 };
 
diff --git a/drivers/s390/char/tape_std.h b/drivers/s390/char/tape_std.h
index 2d311798edf4..1fc952359341 100644
--- a/drivers/s390/char/tape_std.h
+++ b/drivers/s390/char/tape_std.h
@@ -153,6 +153,7 @@ enum s390_tape_type {
         tape_3480,
         tape_3490,
         tape_3590,
+        tape_3592,
 };
 
 #endif // _TAPE_STD_H
diff --git a/drivers/s390/cio/chsc.c b/drivers/s390/cio/chsc.c
index 6412b2c3edd3..72187e54dcac 100644
--- a/drivers/s390/cio/chsc.c
+++ b/drivers/s390/cio/chsc.c
@@ -242,28 +242,10 @@ s390_subchannel_remove_chpid(struct device *dev, void *data)
 	if (sch->vpm == mask)
 		goto out_unreg;
 
-	if ((sch->schib.scsw.actl & (SCSW_ACTL_CLEAR_PEND |
-				     SCSW_ACTL_HALT_PEND |
-				     SCSW_ACTL_START_PEND |
-				     SCSW_ACTL_RESUME_PEND)) &&
-	    (sch->schib.pmcw.lpum == mask)) {
-		int cc = cio_cancel(sch);
-		
-		if (cc == -ENODEV)
-			goto out_unreg;
-
-		if (cc == -EINVAL) {
-			cc = cio_clear(sch);
-			if (cc == -ENODEV)
-				goto out_unreg;
-			/* Call handler. */
-			if (sch->driver && sch->driver->termination)
-				sch->driver->termination(&sch->dev);
-			goto out_unlock;
-		}
-	} else if ((sch->schib.scsw.actl & SCSW_ACTL_DEVACT) &&
-		   (sch->schib.scsw.actl & SCSW_ACTL_SCHACT) &&
-		   (sch->schib.pmcw.lpum == mask)) {
+	if ((sch->schib.scsw.actl & SCSW_ACTL_DEVACT) &&
+	    (sch->schib.scsw.actl & SCSW_ACTL_SCHACT) &&
+	    (sch->schib.pmcw.lpum == mask) &&
+	    (sch->vpm == 0)) {
 		int cc;
 
 		cc = cio_clear(sch);
@@ -653,13 +635,13 @@ __chp_add(struct subchannel_id schid, void *data)
 		if (sch->schib.pmcw.chpid[i] == chp->id) {
 			if (stsch(sch->schid, &sch->schib) != 0) {
 				/* Endgame. */
-				spin_unlock(&sch->lock);
+				spin_unlock_irq(&sch->lock);
 				return -ENXIO;
 			}
 			break;
 		}
 	if (i==8) {
-		spin_unlock(&sch->lock);
+		spin_unlock_irq(&sch->lock);
 		return 0;
 	}
 	sch->lpm = ((sch->schib.pmcw.pim &
diff --git a/drivers/s390/cio/css.h b/drivers/s390/cio/css.h
index 74a257b23383..e210f89a2449 100644
--- a/drivers/s390/cio/css.h
+++ b/drivers/s390/cio/css.h
@@ -45,11 +45,11 @@ struct pgid {
 	union {
 		__u8 fc;   	/* SPID function code */
 		struct path_state ps;	/* SNID path state */
-	} inf;
+	} __attribute__ ((packed)) inf;
 	union {
 		__u32 cpu_addr	: 16;	/* CPU address */
 		struct extended_cssid ext_cssid;
-	} pgid_high;
+	} __attribute__ ((packed)) pgid_high;
 	__u32 cpu_id	: 24;	/* CPU identification */
 	__u32 cpu_model : 16;	/* CPU model */
 	__u32 tod_high;		/* high word TOD clock */
diff --git a/drivers/s390/cio/device_fsm.c b/drivers/s390/cio/device_fsm.c
index 180b3bf8b90d..49ec562d7f60 100644
--- a/drivers/s390/cio/device_fsm.c
+++ b/drivers/s390/cio/device_fsm.c
@@ -749,7 +749,7 @@ ccw_device_irq(struct ccw_device *cdev, enum dev_event dev_event)
 			/* Unit check but no sense data. Need basic sense. */
 			if (ccw_device_do_sense(cdev, irb) != 0)
 				goto call_handler_unsol;
-			memcpy(irb, &cdev->private->irb, sizeof(struct irb));
+			memcpy(&cdev->private->irb, irb, sizeof(struct irb));
 			cdev->private->state = DEV_STATE_W4SENSE;
 			cdev->private->intparm = 0;
 			return;
diff --git a/drivers/s390/cio/qdio.c b/drivers/s390/cio/qdio.c
index 814f9258ce00..96f519281d92 100644
--- a/drivers/s390/cio/qdio.c
+++ b/drivers/s390/cio/qdio.c
@@ -38,6 +38,7 @@
 #include <linux/kernel.h>
 #include <linux/proc_fs.h>
 #include <linux/timer.h>
+#include <linux/mempool.h>
 
 #include <asm/ccwdev.h>
 #include <asm/io.h>
@@ -80,6 +81,8 @@ static int indicator_used[INDICATORS_PER_CACHELINE];
 static __u32 * volatile indicators;
 static __u32 volatile spare_indicator;
 static atomic_t spare_indicator_usecount;
+#define QDIO_MEMPOOL_SCSSC_ELEMENTS 2
+static mempool_t *qdio_mempool_scssc;
 
 static debug_info_t *qdio_dbf_setup;
 static debug_info_t *qdio_dbf_sbal;
@@ -1637,7 +1640,7 @@ next:
 
 	}
 	kfree(irq_ptr->qdr);
-	kfree(irq_ptr);
+	free_page((unsigned long) irq_ptr);
 }
 
 static void
@@ -2304,7 +2307,7 @@ qdio_get_ssqd_information(struct qdio_irq *irq_ptr)
 
 	QDIO_DBF_TEXT0(0,setup,"getssqd");
 	qdioac = 0;
-	ssqd_area = (void *)get_zeroed_page(GFP_KERNEL | GFP_DMA);
+	ssqd_area = mempool_alloc(qdio_mempool_scssc, GFP_ATOMIC);
 	if (!ssqd_area) {
 	        QDIO_PRINT_WARN("Could not get memory for chsc. Using all " \
 				"SIGAs for sch x%x.\n", irq_ptr->schid.sch_no);
@@ -2364,7 +2367,7 @@ qdio_get_ssqd_information(struct qdio_irq *irq_ptr)
 out:
 	qdio_check_subchannel_qebsm(irq_ptr, qdioac,
 				    ssqd_area->sch_token);
-	free_page ((unsigned long) ssqd_area);
+	mempool_free(ssqd_area, qdio_mempool_scssc);
 	irq_ptr->qdioac = qdioac;
 }
 
@@ -2458,7 +2461,7 @@ tiqdio_set_subchannel_ind(struct qdio_irq *irq_ptr, int reset_to_zero)
 			virt_to_phys((volatile void *)irq_ptr->dev_st_chg_ind);
 	}
 
-	scssc_area = (void *)get_zeroed_page(GFP_KERNEL | GFP_DMA);
+	scssc_area = mempool_alloc(qdio_mempool_scssc, GFP_ATOMIC);
 	if (!scssc_area) {
 		QDIO_PRINT_WARN("No memory for setting indicators on " \
 				"subchannel 0.%x.%x.\n",
@@ -2514,7 +2517,7 @@ tiqdio_set_subchannel_ind(struct qdio_irq *irq_ptr, int reset_to_zero)
 	QDIO_DBF_HEX2(0,setup,&real_addr_dev_st_chg_ind,sizeof(unsigned long));
 	result = 0;
 out:
-	free_page ((unsigned long) scssc_area);
+	mempool_free(scssc_area, qdio_mempool_scssc);
 	return result;
 
 }
@@ -2543,7 +2546,7 @@ tiqdio_set_delay_target(struct qdio_irq *irq_ptr, unsigned long delay_target)
 	if (!irq_ptr->is_thinint_irq)
 		return -ENODEV;
 
-	scsscf_area = (void *)get_zeroed_page(GFP_KERNEL | GFP_DMA);
+	scsscf_area = mempool_alloc(qdio_mempool_scssc, GFP_ATOMIC);
 	if (!scsscf_area) {
 		QDIO_PRINT_WARN("No memory for setting delay target on " \
 				"subchannel 0.%x.%x.\n",
@@ -2581,7 +2584,7 @@ tiqdio_set_delay_target(struct qdio_irq *irq_ptr, unsigned long delay_target)
 	QDIO_DBF_HEX2(0,trace,&delay_target,sizeof(unsigned long));
 	result = 0; /* not critical */
 out:
-	free_page ((unsigned long) scsscf_area);
+	mempool_free(scsscf_area, qdio_mempool_scssc);
 	return result;
 }
 
@@ -2980,7 +2983,7 @@ qdio_allocate(struct qdio_initialize *init_data)
 	qdio_allocate_do_dbf(init_data);
 
 	/* create irq */
-	irq_ptr = kzalloc(sizeof(struct qdio_irq), GFP_KERNEL | GFP_DMA);
+	irq_ptr = (void *) get_zeroed_page(GFP_KERNEL | GFP_DMA);
 
 	QDIO_DBF_TEXT0(0,setup,"irq_ptr:");
 	QDIO_DBF_HEX0(0,setup,&irq_ptr,sizeof(void*));
@@ -2995,7 +2998,7 @@ qdio_allocate(struct qdio_initialize *init_data)
 	/* QDR must be in DMA area since CCW data address is only 32 bit */
 	irq_ptr->qdr=kmalloc(sizeof(struct qdr), GFP_KERNEL | GFP_DMA);
   	if (!(irq_ptr->qdr)) {
-   		kfree(irq_ptr);
+   		free_page((unsigned long) irq_ptr);
     		QDIO_PRINT_ERR("kmalloc of irq_ptr->qdr failed!\n");
 		return -ENOMEM;
        	}
@@ -3780,6 +3783,16 @@ oom:
 	return -ENOMEM;
 }
 
+static void *qdio_mempool_alloc(gfp_t gfp_mask, void *size)
+{
+	return (void *) get_zeroed_page(gfp_mask|GFP_DMA);
+}
+
+static void qdio_mempool_free(void *element, void *size)
+{
+	free_page((unsigned long) element);
+}
+
 static int __init
 init_QDIO(void)
 {
@@ -3809,6 +3822,10 @@ init_QDIO(void)
 
 	qdio_add_procfs_entry();
 
+	qdio_mempool_scssc = mempool_create(QDIO_MEMPOOL_SCSSC_ELEMENTS,
+					    qdio_mempool_alloc,
+					    qdio_mempool_free, NULL);
+
 	if (tiqdio_check_chsc_availability())
 		QDIO_PRINT_ERR("Not all CHSCs supported. Continuing.\n");
 
@@ -3824,6 +3841,7 @@ cleanup_QDIO(void)
 	qdio_remove_procfs_entry();
 	qdio_release_qdio_memory();
 	qdio_unregister_dbf_views();
+	mempool_destroy(qdio_mempool_scssc);
 
   	printk("qdio: %s: module removed\n",version);
 }
diff --git a/drivers/s390/net/ctcmain.c b/drivers/s390/net/ctcmain.c
index af9f212314b3..fe986af884f8 100644
--- a/drivers/s390/net/ctcmain.c
+++ b/drivers/s390/net/ctcmain.c
@@ -1486,13 +1486,13 @@ ch_action_iofatal(fsm_instance * fi, int event, void *arg)
 	}
 }
 
-static void 
+static void
 ch_action_reinit(fsm_instance *fi, int event, void *arg)
 {
  	struct channel *ch = (struct channel *)arg;
  	struct net_device *dev = ch->netdev;
  	struct ctc_priv *privptr = dev->priv;
- 
+
 	DBF_TEXT(trace, 4, __FUNCTION__);
  	ch_action_iofatal(fi, event, arg);
  	fsm_addtimer(&privptr->restart_timer, 1000, DEV_EVENT_RESTART, dev);
@@ -1624,7 +1624,7 @@ less_than(char *id1, char *id2)
 	}
 	dev1 = simple_strtoul(id1, &id1, 16);
 	dev2 = simple_strtoul(id2, &id2, 16);
-	
+
 	return (dev1 < dev2);
 }
 
@@ -1895,7 +1895,7 @@ ctc_irq_handler(struct ccw_device *cdev, unsigned long intparm, struct irb *irb)
 			    irb->scsw.dstat);
 		return;
 	}
-	
+
 	priv = ((struct ccwgroup_device *)cdev->dev.driver_data)
 		->dev.driver_data;
 
@@ -1909,7 +1909,7 @@ ctc_irq_handler(struct ccw_device *cdev, unsigned long intparm, struct irb *irb)
 			   "device %s\n", cdev->dev.bus_id);
 		return;
 	}
-	
+
 	dev = (struct net_device *) (ch->netdev);
 	if (dev == NULL) {
 		ctc_pr_crit("ctc: ctc_irq_handler dev=NULL bus_id=%s, ch=0x%p\n",
@@ -2008,12 +2008,12 @@ dev_action_stop(fsm_instance * fi, int event, void *arg)
 		fsm_event(ch->fsm, CH_EVENT_STOP, ch);
 	}
 }
-static void 
+static void
 dev_action_restart(fsm_instance *fi, int event, void *arg)
 {
 	struct net_device *dev = (struct net_device *)arg;
 	struct ctc_priv *privptr = dev->priv;
-	
+
 	DBF_TEXT(trace, 3, __FUNCTION__);
 	ctc_pr_debug("%s: Restarting\n", dev->name);
 	dev_action_stop(fi, event, arg);
@@ -2193,7 +2193,7 @@ transmit_skb(struct channel *ch, struct sk_buff *skb)
 
 	DBF_TEXT(trace, 5, __FUNCTION__);
 	/* we need to acquire the lock for testing the state
-	 * otherwise we can have an IRQ changing the state to 
+	 * otherwise we can have an IRQ changing the state to
 	 * TXIDLE after the test but before acquiring the lock.
 	 */
 	spin_lock_irqsave(&ch->collect_lock, saveflags);
@@ -2393,7 +2393,7 @@ ctc_tx(struct sk_buff *skb, struct net_device * dev)
 
 	/**
 	 * If channels are not running, try to restart them
-	 * and throw away packet. 
+	 * and throw away packet.
 	 */
 	if (fsm_getstate(privptr->fsm) != DEV_STATE_RUNNING) {
 		fsm_event(privptr->fsm, DEV_EVENT_START, dev);
@@ -2738,7 +2738,7 @@ ctc_remove_files(struct device *dev)
 /**
  * Add ctc specific attributes.
  * Add ctc private data.
- * 
+ *
  * @param cgdev pointer to ccwgroup_device just added
  *
  * @returns 0 on success, !0 on failure.
@@ -2869,7 +2869,7 @@ ctc_new_device(struct ccwgroup_device *cgdev)
 	DBF_TEXT(setup, 3, buffer);
 
 	type = get_channel_type(&cgdev->cdev[0]->id);
-	
+
 	snprintf(read_id, CTC_ID_SIZE, "ch-%s", cgdev->cdev[0]->dev.bus_id);
 	snprintf(write_id, CTC_ID_SIZE, "ch-%s", cgdev->cdev[1]->dev.bus_id);
 
@@ -2907,7 +2907,7 @@ ctc_new_device(struct ccwgroup_device *cgdev)
 		    channel_get(type, direction == READ ? read_id : write_id,
 				direction);
 		if (privptr->channel[direction] == NULL) {
-			if (direction == WRITE) 
+			if (direction == WRITE)
 				channel_free(privptr->channel[READ]);
 
 			ctc_free_netdevice(dev, 1);
@@ -2955,7 +2955,7 @@ ctc_shutdown_device(struct ccwgroup_device *cgdev)
 {
 	struct ctc_priv *priv;
 	struct net_device *ndev;
-		
+
 	DBF_TEXT(setup, 3, __FUNCTION__);
 	pr_debug("%s() called\n", __FUNCTION__);
 
diff --git a/drivers/s390/net/ctctty.c b/drivers/s390/net/ctctty.c
index 5cdcdbf92962..af54d1de07bf 100644
--- a/drivers/s390/net/ctctty.c
+++ b/drivers/s390/net/ctctty.c
@@ -130,7 +130,7 @@ ctc_tty_readmodem(ctc_tty_info *info)
 	if ((tty = info->tty)) {
 		if (info->mcr & UART_MCR_RTS) {
 			struct sk_buff *skb;
-			
+
 			if ((skb = skb_dequeue(&info->rx_queue))) {
 				int len = skb->len;
 				tty_insert_flip_string(tty, skb->data, len);
@@ -328,7 +328,7 @@ ctc_tty_inject(ctc_tty_info *info, char c)
 {
 	int skb_res;
 	struct sk_buff *skb;
-	
+
 	DBF_TEXT(trace, 4, __FUNCTION__);
 	if (ctc_tty_shuttingdown)
 		return;
@@ -497,7 +497,7 @@ ctc_tty_write(struct tty_struct *tty, const u_char * buf, int count)
 		c = (count < CTC_TTY_XMIT_SIZE) ? count : CTC_TTY_XMIT_SIZE;
 		if (c <= 0)
 			break;
-		
+
 		skb_res = info->netdev->hard_header_len + sizeof(info->mcr) +
 			+ sizeof(__u32);
 		skb = dev_alloc_skb(skb_res + c);
@@ -828,7 +828,7 @@ ctc_tty_block_til_ready(struct tty_struct *tty, struct file *filp, ctc_tty_info
 	if (tty_hung_up_p(filp) ||
 	    (info->flags & CTC_ASYNC_CLOSING)) {
 		if (info->flags & CTC_ASYNC_CLOSING)
-			wait_event(info->close_wait, 
+			wait_event(info->close_wait,
 				   !(info->flags & CTC_ASYNC_CLOSING));
 #ifdef MODEM_DO_RESTART
 		if (info->flags & CTC_ASYNC_HUP_NOTIFY)
@@ -1247,7 +1247,7 @@ ctc_tty_unregister_netdev(struct net_device *dev) {
 void
 ctc_tty_cleanup(void) {
 	unsigned long saveflags;
-	
+
 	DBF_TEXT(trace, 2, __FUNCTION__);
 	spin_lock_irqsave(&ctc_tty_lock, saveflags);
 	ctc_tty_shuttingdown = 1;
diff --git a/drivers/s390/net/cu3088.c b/drivers/s390/net/cu3088.c
index b12533104c1f..e965f03a7291 100644
--- a/drivers/s390/net/cu3088.c
+++ b/drivers/s390/net/cu3088.c
@@ -20,7 +20,7 @@
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  *
  */
-
+
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/err.h>
@@ -77,7 +77,7 @@ group_write(struct device_driver *drv, const char *buf, size_t count)
 		int len;
 
 		if (!(end = strchr(start, delim[i])))
-			return count;
+			return -EINVAL;
 		len = min_t(ptrdiff_t, BUS_ID_SIZE, end - start + 1);
 		strlcpy (bus_ids[i], start, len);
 		argv[i] = bus_ids[i];
@@ -94,7 +94,7 @@ static DRIVER_ATTR(group, 0200, NULL, group_write);
 
 /* Register-unregister for ctc&lcs */
 int
-register_cu3088_discipline(struct ccwgroup_driver *dcp) 
+register_cu3088_discipline(struct ccwgroup_driver *dcp)
 {
 	int rc;
 
@@ -109,7 +109,7 @@ register_cu3088_discipline(struct ccwgroup_driver *dcp)
 	rc = driver_create_file(&dcp->driver, &driver_attr_group);
 	if (rc)
 		ccwgroup_driver_unregister(dcp);
-		
+
 	return rc;
 
 }
@@ -137,7 +137,7 @@ static int __init
 cu3088_init (void)
 {
 	int rc;
-	
+
 	cu3088_root_dev = s390_root_dev_register("cu3088");
 	if (IS_ERR(cu3088_root_dev))
 		return PTR_ERR(cu3088_root_dev);
diff --git a/drivers/s390/net/iucv.c b/drivers/s390/net/iucv.c
index 6190be9dca99..e0c7deb98831 100644
--- a/drivers/s390/net/iucv.c
+++ b/drivers/s390/net/iucv.c
@@ -1,4 +1,4 @@
-/* 
+/*
  * IUCV network driver
  *
  * Copyright (C) 2001 IBM Deutschland Entwicklung GmbH, IBM Corporation
@@ -28,7 +28,7 @@
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  *
  */
-
+
 /* #define DEBUG */
 
 #include <linux/module.h>
@@ -81,7 +81,7 @@ iucv_bus_match (struct device *dev, struct device_driver *drv)
 struct bus_type iucv_bus = {
 	.name = "iucv",
 	.match = iucv_bus_match,
-};	
+};
 
 struct device *iucv_root;
 
@@ -297,7 +297,7 @@ MODULE_LICENSE("GPL");
 /*
  * Debugging stuff
  *******************************************************************************/
-
+
 
 #ifdef DEBUG
 static int debuglevel = 0;
@@ -344,7 +344,7 @@ do { \
 /*
  * Internal functions
  *******************************************************************************/
-
+
 /**
  * print start banner
  */
@@ -810,7 +810,7 @@ iucv_register_program (__u8 pgmname[16],
 			sizeof (new_handler->id.userid));
 		EBC_TOUPPER (new_handler->id.userid,
 			     sizeof (new_handler->id.userid));
-		
+
 		if (pgmmask) {
 			memcpy (new_handler->id.mask, pgmmask,
 				sizeof (new_handler->id.mask));
@@ -1229,7 +1229,7 @@ iucv_purge (__u16 pathid, __u32 msgid, __u32 srccls, __u32 *audit)
 		/* parm->ipaudit has only 3 bytes */
 		*audit >>= 8;
 	}
-	
+
 	release_param(parm);
 
 	iucv_debug(1, "b2f0_result = %ld", b2f0_result);
@@ -2330,14 +2330,14 @@ iucv_do_int(iucv_GeneralInterrupt * int_buf)
 					temp_buff1[j] &= (h->id.mask)[j];
 					temp_buff2[j] &= (h->id.mask)[j];
 				}
-				
+
 				iucv_dumpit("temp_buff1:",
 					    temp_buff1, sizeof(temp_buff1));
 				iucv_dumpit("temp_buff2",
 					    temp_buff2, sizeof(temp_buff2));
-				
+
 				if (!memcmp (temp_buff1, temp_buff2, 24)) {
-					
+
 					iucv_debug(2,
 						   "found a matching handler");
 					break;
@@ -2368,7 +2368,7 @@ iucv_do_int(iucv_GeneralInterrupt * int_buf)
 			} else
 				iucv_sever(int_buf->ippathid, no_listener);
 			break;
-			
+
 		case 0x02:		/*connection complete */
 			if (messagesDisabled) {
 			    iucv_setmask(~0);
@@ -2387,7 +2387,7 @@ iucv_do_int(iucv_GeneralInterrupt * int_buf)
 			} else
 				iucv_sever(int_buf->ippathid, no_listener);
 			break;
-			
+
 		case 0x03:		/* connection severed */
 			if (messagesDisabled) {
 			    iucv_setmask(~0);
@@ -2398,13 +2398,13 @@ iucv_do_int(iucv_GeneralInterrupt * int_buf)
 					interrupt->ConnectionSevered(
 						(iucv_ConnectionSevered *)int_buf,
 						h->pgm_data);
-				
+
 				else
 					iucv_sever (int_buf->ippathid, no_listener);
 			} else
 				iucv_sever(int_buf->ippathid, no_listener);
 			break;
-			
+
 		case 0x04:		/* connection quiesced */
 			if (messagesDisabled) {
 			    iucv_setmask(~0);
@@ -2420,7 +2420,7 @@ iucv_do_int(iucv_GeneralInterrupt * int_buf)
 						   "ConnectionQuiesced not called");
 			}
 			break;
-			
+
 		case 0x05:		/* connection resumed */
 			if (messagesDisabled) {
 			    iucv_setmask(~0);
@@ -2436,7 +2436,7 @@ iucv_do_int(iucv_GeneralInterrupt * int_buf)
 						   "ConnectionResumed not called");
 			}
 			break;
-			
+
 		case 0x06:		/* priority message complete */
 		case 0x07:		/* nonpriority message complete */
 			if (h) {
@@ -2449,7 +2449,7 @@ iucv_do_int(iucv_GeneralInterrupt * int_buf)
 						   "MessageComplete not called");
 			}
 			break;
-			
+
 		case 0x08:		/* priority message pending  */
 		case 0x09:		/* nonpriority message pending  */
 			if (h) {
@@ -2467,7 +2467,7 @@ iucv_do_int(iucv_GeneralInterrupt * int_buf)
 			       __FUNCTION__);
 			break;
 	}			/* end switch */
-	
+
 	iucv_debug(2, "exiting pathid %d, type %02X",
 		 int_buf->ippathid, int_buf->iptype);
 
diff --git a/drivers/s390/net/iucv.h b/drivers/s390/net/iucv.h
index 0c4644d3d2f3..5b6b1b7241c9 100644
--- a/drivers/s390/net/iucv.h
+++ b/drivers/s390/net/iucv.h
@@ -4,7 +4,7 @@
  *
  *  S390 version
  *    Copyright (C) 2000 IBM Corporation
- *    Author(s):Alan Altmark (Alan_Altmark@us.ibm.com) 
+ *    Author(s):Alan Altmark (Alan_Altmark@us.ibm.com)
  *		Xenia Tkatschow (xenia@us.ibm.com)
  *
  *
@@ -16,17 +16,17 @@
  * CP Programming Services book, also available on the web
  * thru www.ibm.com/s390/vm/pubs, manual # SC24-5760
  *
- *      Definition of Return Codes                                    
- *      -All positive return codes including zero are reflected back  
- *       from CP except for iucv_register_program. The definition of each 
- *       return code can be found in CP Programming Services book.    
- *       Also available on the web thru www.ibm.com/s390/vm/pubs, manual # SC24-5760          
- *      - Return Code of:         
- *             (-EINVAL) Invalid value       
- *             (-ENOMEM) storage allocation failed              
+ *      Definition of Return Codes
+ *      -All positive return codes including zero are reflected back
+ *       from CP except for iucv_register_program. The definition of each
+ *       return code can be found in CP Programming Services book.
+ *       Also available on the web thru www.ibm.com/s390/vm/pubs, manual # SC24-5760
+ *      - Return Code of:
+ *             (-EINVAL) Invalid value
+ *             (-ENOMEM) storage allocation failed
  *	pgmask defined in iucv_register_program will be set depending on input
- *	paramters. 
- *	
+ *	paramters.
+ *
  */
 
 #include <linux/types.h>
@@ -124,13 +124,13 @@ iucv_hex_dump(unsigned char *buf, size_t len)
 #define iucv_handle_t void *
 
 /* flags1:
- * All flags are defined in the field IPFLAGS1 of each function   
- * and can be found in CP Programming Services.                  
- * IPLOCAL  - Indicates the connect can only be satisfied on the 
- *            local system                                       
- * IPPRTY   - Indicates a priority message                       
- * IPQUSCE  - Indicates you do not want to receive messages on a 
- *            path until an iucv_resume is issued                
+ * All flags are defined in the field IPFLAGS1 of each function
+ * and can be found in CP Programming Services.
+ * IPLOCAL  - Indicates the connect can only be satisfied on the
+ *            local system
+ * IPPRTY   - Indicates a priority message
+ * IPQUSCE  - Indicates you do not want to receive messages on a
+ *            path until an iucv_resume is issued
  * IPRMDATA - Indicates that the message is in the parameter list
  */
 #define IPLOCAL   	0x01
@@ -154,14 +154,14 @@ iucv_hex_dump(unsigned char *buf, size_t len)
 #define AllInterrupts                                    0xf8
 /*
  * Mapping of external interrupt buffers should be used with the corresponding
- * interrupt types.                  
- * Names: iucv_ConnectionPending    ->  connection pending 
+ * interrupt types.
+ * Names: iucv_ConnectionPending    ->  connection pending
  *        iucv_ConnectionComplete   ->  connection complete
- *        iucv_ConnectionSevered    ->  connection severed 
- *        iucv_ConnectionQuiesced   ->  connection quiesced 
- *        iucv_ConnectionResumed    ->  connection resumed 
- *        iucv_MessagePending       ->  message pending    
- *        iucv_MessageComplete      ->  message complete   
+ *        iucv_ConnectionSevered    ->  connection severed
+ *        iucv_ConnectionQuiesced   ->  connection quiesced
+ *        iucv_ConnectionResumed    ->  connection resumed
+ *        iucv_MessagePending       ->  message pending
+ *        iucv_MessageComplete      ->  message complete
  */
 typedef struct {
 	u16 ippathid;
@@ -260,16 +260,16 @@ typedef struct {
 	uchar res2[3];
 } iucv_MessageComplete;
 
-/* 
- * iucv_interrupt_ops_t: Is a vector of functions that handle 
- * IUCV interrupts.                                          
- * Parameter list:                                           
- *         eib - is a pointer to a 40-byte area described    
- *               with one of the structures above.           
- *         pgm_data - this data is strictly for the          
- *                    interrupt handler that is passed by    
- *                    the application. This may be an address 
- *                    or token.                              
+/*
+ * iucv_interrupt_ops_t: Is a vector of functions that handle
+ * IUCV interrupts.
+ * Parameter list:
+ *         eib - is a pointer to a 40-byte area described
+ *               with one of the structures above.
+ *         pgm_data - this data is strictly for the
+ *                    interrupt handler that is passed by
+ *                    the application. This may be an address
+ *                    or token.
 */
 typedef struct {
 	void (*ConnectionPending) (iucv_ConnectionPending * eib,
@@ -287,8 +287,8 @@ typedef struct {
 } iucv_interrupt_ops_t;
 
 /*
- *iucv_array_t : Defines buffer array.                      
- * Inside the array may be 31- bit addresses and 31-bit lengths. 
+ *iucv_array_t : Defines buffer array.
+ * Inside the array may be 31- bit addresses and 31-bit lengths.
 */
 typedef struct {
 	u32 address;
@@ -299,19 +299,19 @@ extern struct bus_type iucv_bus;
 extern struct device *iucv_root;
 
 /*   -prototypes-    */
-/*                                                                
- * Name: iucv_register_program                                    
- * Purpose: Registers an application with IUCV                    
- * Input: prmname - user identification                           
+/*
+ * Name: iucv_register_program
+ * Purpose: Registers an application with IUCV
+ * Input: prmname - user identification
  *        userid  - machine identification
  *        pgmmask - indicates which bits in the prmname and userid combined will be
  *  		    used to determine who is given control
- *        ops     - address of vector of interrupt handlers       
- *        pgm_data- application data passed to interrupt handlers 
- * Output: NA                                                     
- * Return: address of handler                                     
+ *        ops     - address of vector of interrupt handlers
+ *        pgm_data- application data passed to interrupt handlers
+ * Output: NA
+ * Return: address of handler
  *         (0) - Error occurred, registration not completed.
- * NOTE: Exact cause of failure will be recorded in syslog.                        
+ * NOTE: Exact cause of failure will be recorded in syslog.
 */
 iucv_handle_t iucv_register_program (uchar pgmname[16],
 				     uchar userid[8],
@@ -319,13 +319,13 @@ iucv_handle_t iucv_register_program (uchar pgmname[16],
 				     iucv_interrupt_ops_t * ops,
 				     void *pgm_data);
 
-/*                                                
- * Name: iucv_unregister_program                  
- * Purpose: Unregister application with IUCV      
- * Input: address of handler                      
- * Output: NA                                     
- * Return: (0) - Normal return                    
- *         (-EINVAL) - Internal error, wild pointer     
+/*
+ * Name: iucv_unregister_program
+ * Purpose: Unregister application with IUCV
+ * Input: address of handler
+ * Output: NA
+ * Return: (0) - Normal return
+ *         (-EINVAL) - Internal error, wild pointer
 */
 int iucv_unregister_program (iucv_handle_t handle);
 
@@ -333,7 +333,7 @@ int iucv_unregister_program (iucv_handle_t handle);
  * Name: iucv_accept
  * Purpose: This function is issued after the user receives a Connection Pending external
  *          interrupt and now wishes to complete the IUCV communication path.
- * Input:  pathid - u16 , Path identification number   
+ * Input:  pathid - u16 , Path identification number
  *         msglim_reqstd - u16, The number of outstanding messages requested.
  *         user_data - uchar[16], Data specified by the iucv_connect function.
  *	   flags1 - int, Contains options for this path.
@@ -358,34 +358,34 @@ int iucv_accept (u16 pathid,
 		 void *pgm_data, int *flags1_out, u16 * msglim);
 
 /*
- * Name: iucv_connect                                         
+ * Name: iucv_connect
  * Purpose: This function establishes an IUCV path. Although the connect may complete
- *	    successfully, you are not able to use the path until you receive an IUCV 
- *          Connection Complete external interrupt.            
- * Input: pathid - u16 *, Path identification number          
- *        msglim_reqstd - u16, Number of outstanding messages requested       
- *        user_data - uchar[16], 16-byte user data                    
+ *	    successfully, you are not able to use the path until you receive an IUCV
+ *          Connection Complete external interrupt.
+ * Input: pathid - u16 *, Path identification number
+ *        msglim_reqstd - u16, Number of outstanding messages requested
+ *        user_data - uchar[16], 16-byte user data
  *	  userid - uchar[8], User identification
- *        system_name - uchar[8], 8-byte identifying the system name 
+ *        system_name - uchar[8], 8-byte identifying the system name
  *	  flags1 - int, Contains options for this path.
  *          -IPPRTY -   0x20, Specifies if you want to send priority message.
  *          -IPRMDATA - 0x80, Specifies whether your program can handle a message
  *            	 in  the parameter list.
- *          -IPQUSCE -  0x40, Specifies whether you want to quiesce the path being	 
+ *          -IPQUSCE -  0x40, Specifies whether you want to quiesce the path being
  *		established.
- *          -IPLOCAL -  0X01, Allows an application to force the partner to be on 
+ *          -IPLOCAL -  0X01, Allows an application to force the partner to be on
  *		the local system. If local is specified then target class cannot be
- *		specified.                       
+ *		specified.
  *        flags1_out - int * Contains information about the path
  *           - IPPRTY - 0x20, Indicates you may send priority messages.
  *        msglim - * u16, Number of outstanding messages
- *        handle - iucv_handle_t, Address of handler                         
- *        pgm_data - void *, Application data passed to interrupt handlers              
+ *        handle - iucv_handle_t, Address of handler
+ *        pgm_data - void *, Application data passed to interrupt handlers
  * Output: return code from CP IUCV call
  *         rc - return code from iucv_declare_buffer
- *         -EINVAL - Invalid handle passed by application 
- *         -EINVAL - Pathid address is NULL 
- *         add_pathid_result - Return code from internal function add_pathid         
+ *         -EINVAL - Invalid handle passed by application
+ *         -EINVAL - Pathid address is NULL
+ *         add_pathid_result - Return code from internal function add_pathid
 */
 int
     iucv_connect (u16 * pathid,
@@ -397,16 +397,16 @@ int
 		  int *flags1_out,
 		  u16 * msglim, iucv_handle_t handle, void *pgm_data);
 
-/*                                                                     
- * Name: iucv_purge                                                    
- * Purpose: This function cancels a message that you have sent.        
- * Input: pathid - Path identification number.                          
+/*
+ * Name: iucv_purge
+ * Purpose: This function cancels a message that you have sent.
+ * Input: pathid - Path identification number.
  *        msgid - Specifies the message ID of the message to be purged.
- *        srccls - Specifies the source message class.                  
- * Output: audit - Contains information about asynchronous error       
- *                 that may have affected the normal completion        
- *                 of this message.                                    
- * Return: Return code from CP IUCV call.                           
+ *        srccls - Specifies the source message class.
+ * Output: audit - Contains information about asynchronous error
+ *                 that may have affected the normal completion
+ *                 of this message.
+ * Return: Return code from CP IUCV call.
 */
 int iucv_purge (u16 pathid, u32 msgid, u32 srccls, __u32 *audit);
 /*
@@ -426,38 +426,38 @@ ulong iucv_query_maxconn (void);
  */
 ulong iucv_query_bufsize (void);
 
-/*                                                                     
- * Name: iucv_quiesce                                                  
- * Purpose: This function temporarily suspends incoming messages on an 
- *          IUCV path. You can later reactivate the path by invoking   
- *          the iucv_resume function.                                  
- * Input: pathid - Path identification number                          
- *        user_data  - 16-bytes of user data                           
- * Output: NA                                                          
- * Return: Return code from CP IUCV call.                           
+/*
+ * Name: iucv_quiesce
+ * Purpose: This function temporarily suspends incoming messages on an
+ *          IUCV path. You can later reactivate the path by invoking
+ *          the iucv_resume function.
+ * Input: pathid - Path identification number
+ *        user_data  - 16-bytes of user data
+ * Output: NA
+ * Return: Return code from CP IUCV call.
 */
 int iucv_quiesce (u16 pathid, uchar user_data[16]);
 
-/*                                                                     
- * Name: iucv_receive                                                  
- * Purpose: This function receives messages that are being sent to you 
+/*
+ * Name: iucv_receive
+ * Purpose: This function receives messages that are being sent to you
  *          over established paths. Data will be returned in buffer for length of
  *          buflen.
- * Input: 
- *       pathid - Path identification number.                          
- *       buffer - Address of buffer to receive.                        
- *       buflen - Length of buffer to receive.                         
- *       msgid - Specifies the message ID.          
- *       trgcls - Specifies target class.                       
- * Output: 
+ * Input:
+ *       pathid - Path identification number.
+ *       buffer - Address of buffer to receive.
+ *       buflen - Length of buffer to receive.
+ *       msgid - Specifies the message ID.
+ *       trgcls - Specifies target class.
+ * Output:
  *	 flags1_out: int *, Contains information about this path.
  *         IPNORPY - 0x10 Specifies this is a one-way message and no reply is
- *	   expected.      
- *         IPPRTY  - 0x20 Specifies if you want to send priority message.       
+ *	   expected.
+ *         IPPRTY  - 0x20 Specifies if you want to send priority message.
  *         IPRMDATA - 0x80 specifies the data is contained in the parameter list
  *       residual_buffer - address of buffer updated by the number
  *                         of bytes you have received.
- *       residual_length -      
+ *       residual_length -
  *              Contains one of the following values, if the receive buffer is:
  *               The same length as the message, this field is zero.
  *               Longer than the message, this field contains the number of
@@ -466,8 +466,8 @@ int iucv_quiesce (u16 pathid, uchar user_data[16]);
  *                count (that is, the number of bytes remaining in the
  *                message that does not fit into the buffer. In this
  *                case b2f0_result = 5.
- * Return: Return code from CP IUCV call.                           
- *         (-EINVAL) - buffer address is pointing to NULL                   
+ * Return: Return code from CP IUCV call.
+ *         (-EINVAL) - buffer address is pointing to NULL
 */
 int iucv_receive (u16 pathid,
 		  u32 msgid,
@@ -477,16 +477,16 @@ int iucv_receive (u16 pathid,
 		  int *flags1_out,
 		  ulong * residual_buffer, ulong * residual_length);
 
- /*                                                                     
-  * Name: iucv_receive_array                                            
-  * Purpose: This function receives messages that are being sent to you 
+ /*
+  * Name: iucv_receive_array
+  * Purpose: This function receives messages that are being sent to you
   *          over established paths. Data will be returned in first buffer for
   *          length of first buffer.
-  * Input: pathid - Path identification number.                          
+  * Input: pathid - Path identification number.
   *        msgid - specifies the message ID.
   *        trgcls - Specifies target class.
-  *        buffer - Address of array of buffers.                         
-  *        buflen - Total length of buffers.                             
+  *        buffer - Address of array of buffers.
+  *        buflen - Total length of buffers.
   * Output:
   *        flags1_out: int *, Contains information about this path.
   *          IPNORPY - 0x10 Specifies this is a one-way message and no reply is
@@ -504,8 +504,8 @@ int iucv_receive (u16 pathid,
   *                count (that is, the number of bytes remaining in the
   *                message that does not fit into the buffer. In this
   *                case b2f0_result = 5.
-  * Return: Return code from CP IUCV call.                           
-  *         (-EINVAL) - Buffer address is NULL.       
+  * Return: Return code from CP IUCV call.
+  *         (-EINVAL) - Buffer address is NULL.
   */
 int iucv_receive_array (u16 pathid,
 			u32 msgid,
@@ -515,44 +515,44 @@ int iucv_receive_array (u16 pathid,
 			int *flags1_out,
 			ulong * residual_buffer, ulong * residual_length);
 
-/*                                                                       
- * Name: iucv_reject                                                     
- * Purpose: The reject function refuses a specified message. Between the 
- *          time you are notified of a message and the time that you     
- *          complete the message, the message may be rejected.           
- * Input: pathid - Path identification number.                            
- *        msgid - Specifies the message ID.                   
- *        trgcls - Specifies target class.                                
- * Output: NA                                                            
- * Return: Return code from CP IUCV call.                             
+/*
+ * Name: iucv_reject
+ * Purpose: The reject function refuses a specified message. Between the
+ *          time you are notified of a message and the time that you
+ *          complete the message, the message may be rejected.
+ * Input: pathid - Path identification number.
+ *        msgid - Specifies the message ID.
+ *        trgcls - Specifies target class.
+ * Output: NA
+ * Return: Return code from CP IUCV call.
 */
 int iucv_reject (u16 pathid, u32 msgid, u32 trgcls);
 
-/*                                                                     
- * Name: iucv_reply                                                    
- * Purpose: This function responds to the two-way messages that you    
- *          receive. You must identify completely the message to       
- *          which you wish to reply. ie, pathid, msgid, and trgcls.    
- * Input: pathid - Path identification number.                          
- *        msgid - Specifies the message ID.                
- *        trgcls - Specifies target class.                              
+/*
+ * Name: iucv_reply
+ * Purpose: This function responds to the two-way messages that you
+ *          receive. You must identify completely the message to
+ *          which you wish to reply. ie, pathid, msgid, and trgcls.
+ * Input: pathid - Path identification number.
+ *        msgid - Specifies the message ID.
+ *        trgcls - Specifies target class.
  *        flags1 - Option for path.
- *          IPPRTY- 0x20, Specifies if you want to send priority message.        
- *        buffer - Address of reply buffer.                             
- *        buflen - Length of reply buffer.                              
- * Output: residual_buffer - Address of buffer updated by the number 
- *                    of bytes you have moved.              
+ *          IPPRTY- 0x20, Specifies if you want to send priority message.
+ *        buffer - Address of reply buffer.
+ *        buflen - Length of reply buffer.
+ * Output: residual_buffer - Address of buffer updated by the number
+ *                    of bytes you have moved.
  *         residual_length - Contains one of the following values:
  *		If the answer buffer is the same length as the reply, this field
  *		 contains zero.
  *		If the answer buffer is longer than the reply, this field contains
- *		 the number of bytes remaining in the buffer.  
+ *		 the number of bytes remaining in the buffer.
  *		If the answer buffer is shorter than the reply, this field contains
  *		 a residual count (that is, the number of bytes remianing in the
  *		 reply that does not fit into the buffer. In this
  *               case b2f0_result = 5.
- * Return: Return code from CP IUCV call.                           
- *         (-EINVAL) - Buffer address is NULL.                               
+ * Return: Return code from CP IUCV call.
+ *         (-EINVAL) - Buffer address is NULL.
 */
 int iucv_reply (u16 pathid,
 		u32 msgid,
@@ -561,20 +561,20 @@ int iucv_reply (u16 pathid,
 		void *buffer, ulong buflen, ulong * residual_buffer,
 		ulong * residual_length);
 
-/*                                                                       
- * Name: iucv_reply_array                                                
- * Purpose: This function responds to the two-way messages that you      
- *          receive. You must identify completely the message to         
- *          which you wish to reply. ie, pathid, msgid, and trgcls.      
- *          The array identifies a list of addresses and lengths of      
- *          discontiguous buffers that contains the reply data.          
- * Input: pathid - Path identification number                            
- *        msgid - Specifies the message ID. 
- *        trgcls - Specifies target class.                                
+/*
+ * Name: iucv_reply_array
+ * Purpose: This function responds to the two-way messages that you
+ *          receive. You must identify completely the message to
+ *          which you wish to reply. ie, pathid, msgid, and trgcls.
+ *          The array identifies a list of addresses and lengths of
+ *          discontiguous buffers that contains the reply data.
+ * Input: pathid - Path identification number
+ *        msgid - Specifies the message ID.
+ *        trgcls - Specifies target class.
  *        flags1 - Option for path.
  *          IPPRTY- 0x20, Specifies if you want to send priority message.
- *        buffer - Address of array of reply buffers.                     
- *        buflen - Total length of reply buffers.                         
+ *        buffer - Address of array of reply buffers.
+ *        buflen - Total length of reply buffers.
  * Output: residual_buffer - Address of buffer which IUCV is currently working on.
  *         residual_length - Contains one of the following values:
  *              If the answer buffer is the same length as the reply, this field
@@ -585,8 +585,8 @@ int iucv_reply (u16 pathid,
  *               a residual count (that is, the number of bytes remianing in the
  *               reply that does not fit into the buffer. In this
  *               case b2f0_result = 5.
- * Return: Return code from CP IUCV call.                             
- *         (-EINVAL) - Buffer address is NULL.              
+ * Return: Return code from CP IUCV call.
+ *         (-EINVAL) - Buffer address is NULL.
 */
 int iucv_reply_array (u16 pathid,
 		      u32 msgid,
@@ -596,77 +596,77 @@ int iucv_reply_array (u16 pathid,
 		      ulong buflen, ulong * residual_address,
 		      ulong * residual_length);
 
-/*                                                                  
- * Name: iucv_reply_prmmsg                                          
- * Purpose: This function responds to the two-way messages that you 
- *          receive. You must identify completely the message to    
- *          which you wish to reply. ie, pathid, msgid, and trgcls. 
- *          Prmmsg signifies the data is moved into the             
- *          parameter list.                                         
- * Input: pathid - Path identification number.                       
- *        msgid - Specifies the message ID.              
- *        trgcls - Specifies target class.                           
+/*
+ * Name: iucv_reply_prmmsg
+ * Purpose: This function responds to the two-way messages that you
+ *          receive. You must identify completely the message to
+ *          which you wish to reply. ie, pathid, msgid, and trgcls.
+ *          Prmmsg signifies the data is moved into the
+ *          parameter list.
+ * Input: pathid - Path identification number.
+ *        msgid - Specifies the message ID.
+ *        trgcls - Specifies target class.
  *        flags1 - Option for path.
  *          IPPRTY- 0x20 Specifies if you want to send priority message.
- *        prmmsg - 8-bytes of data to be placed into the parameter.  
- *                 list.                                            
- * Output: NA                                                       
- * Return: Return code from CP IUCV call.                        
+ *        prmmsg - 8-bytes of data to be placed into the parameter.
+ *                 list.
+ * Output: NA
+ * Return: Return code from CP IUCV call.
 */
 int iucv_reply_prmmsg (u16 pathid,
 		       u32 msgid, u32 trgcls, int flags1, uchar prmmsg[8]);
 
-/*                                                                     
- * Name: iucv_resume                                                   
- * Purpose: This function restores communications over a quiesced path 
- * Input: pathid - Path identification number.                          
- *        user_data  - 16-bytes of user data.                           
- * Output: NA                                                          
- * Return: Return code from CP IUCV call.                           
+/*
+ * Name: iucv_resume
+ * Purpose: This function restores communications over a quiesced path
+ * Input: pathid - Path identification number.
+ *        user_data  - 16-bytes of user data.
+ * Output: NA
+ * Return: Return code from CP IUCV call.
 */
 int iucv_resume (u16 pathid, uchar user_data[16]);
 
-/*                                                                   
- * Name: iucv_send                                                   
- * Purpose: This function transmits data to another application.     
- *          Data to be transmitted is in a buffer and this is a      
- *          one-way message and the receiver will not reply to the   
- *          message.                                                 
- * Input: pathid - Path identification number.                        
- *        trgcls - Specifies target class.                            
- *        srccls - Specifies the source message class.                
- *        msgtag - Specifies a tag to be associated with the message. 
+/*
+ * Name: iucv_send
+ * Purpose: This function transmits data to another application.
+ *          Data to be transmitted is in a buffer and this is a
+ *          one-way message and the receiver will not reply to the
+ *          message.
+ * Input: pathid - Path identification number.
+ *        trgcls - Specifies target class.
+ *        srccls - Specifies the source message class.
+ *        msgtag - Specifies a tag to be associated with the message.
  *        flags1 - Option for path.
  *          IPPRTY- 0x20 Specifies if you want to send priority message.
- *        buffer - Address of send buffer.                            
- *        buflen - Length of send buffer.                             
- * Output: msgid - Specifies the message ID.                         
- * Return: Return code from CP IUCV call.                         
- *         (-EINVAL) - Buffer address is NULL.                             
+ *        buffer - Address of send buffer.
+ *        buflen - Length of send buffer.
+ * Output: msgid - Specifies the message ID.
+ * Return: Return code from CP IUCV call.
+ *         (-EINVAL) - Buffer address is NULL.
 */
 int iucv_send (u16 pathid,
 	       u32 * msgid,
 	       u32 trgcls,
 	       u32 srccls, u32 msgtag, int flags1, void *buffer, ulong buflen);
 
-/*                                                                   
- * Name: iucv_send_array                                             
- * Purpose: This function transmits data to another application.     
- *          The contents of buffer is the address of the array of    
- *          addresses and lengths of discontiguous buffers that hold 
- *          the message text. This is a one-way message and the      
- *          receiver will not reply to the message.                  
- * Input: pathid - Path identification number.                        
- *        trgcls - Specifies target class.                            
- *        srccls - Specifies the source message class.                
+/*
+ * Name: iucv_send_array
+ * Purpose: This function transmits data to another application.
+ *          The contents of buffer is the address of the array of
+ *          addresses and lengths of discontiguous buffers that hold
+ *          the message text. This is a one-way message and the
+ *          receiver will not reply to the message.
+ * Input: pathid - Path identification number.
+ *        trgcls - Specifies target class.
+ *        srccls - Specifies the source message class.
  *        msgtag - Specifies a tag to be associated witht the message.
  *        flags1 - Option for path.
- *          IPPRTY- specifies if you want to send priority message. 
- *        buffer - Address of array of send buffers.                  
- *        buflen - Total length of send buffers.                      
- * Output: msgid - Specifies the message ID.                         
- * Return: Return code from CP IUCV call.                         
- *         (-EINVAL) - Buffer address is NULL.                             
+ *          IPPRTY- specifies if you want to send priority message.
+ *        buffer - Address of array of send buffers.
+ *        buflen - Total length of send buffers.
+ * Output: msgid - Specifies the message ID.
+ * Return: Return code from CP IUCV call.
+ *         (-EINVAL) - Buffer address is NULL.
 */
 int iucv_send_array (u16 pathid,
 		     u32 * msgid,
@@ -675,48 +675,48 @@ int iucv_send_array (u16 pathid,
 		     u32 msgtag,
 		     int flags1, iucv_array_t * buffer, ulong buflen);
 
-/*                                                                     
- * Name: iucv_send_prmmsg                                              
- * Purpose: This function transmits data to another application.       
- *          Prmmsg specifies that the 8-bytes of data are to be moved  
- *          into the parameter list. This is a one-way message and the 
- *          receiver will not reply to the message.                    
- * Input: pathid - Path identification number.                          
- *        trgcls - Specifies target class.                              
- *        srccls - Specifies the source message class.                  
- *        msgtag - Specifies a tag to be associated with the message.   
+/*
+ * Name: iucv_send_prmmsg
+ * Purpose: This function transmits data to another application.
+ *          Prmmsg specifies that the 8-bytes of data are to be moved
+ *          into the parameter list. This is a one-way message and the
+ *          receiver will not reply to the message.
+ * Input: pathid - Path identification number.
+ *        trgcls - Specifies target class.
+ *        srccls - Specifies the source message class.
+ *        msgtag - Specifies a tag to be associated with the message.
  *        flags1 - Option for path.
  *          IPPRTY- 0x20 specifies if you want to send priority message.
- *        prmmsg - 8-bytes of data to be placed into parameter list.    
- * Output: msgid - Specifies the message ID.                           
- * Return: Return code from CP IUCV call.                           
+ *        prmmsg - 8-bytes of data to be placed into parameter list.
+ * Output: msgid - Specifies the message ID.
+ * Return: Return code from CP IUCV call.
 */
 int iucv_send_prmmsg (u16 pathid,
 		      u32 * msgid,
 		      u32 trgcls,
 		      u32 srccls, u32 msgtag, int flags1, uchar prmmsg[8]);
 
-/*                                                                
- * Name: iucv_send2way                                            
- * Purpose: This function transmits data to another application.  
- *          Data to be transmitted is in a buffer. The receiver   
- *          of the send is expected to reply to the message and   
- *          a buffer is provided into which IUCV moves the reply  
- *          to this message.                                      
- * Input: pathid - Path identification number.                     
- *        trgcls - Specifies target class.                         
- *        srccls - Specifies the source message class.             
- *        msgtag - Specifies a tag associated with the message.    
+/*
+ * Name: iucv_send2way
+ * Purpose: This function transmits data to another application.
+ *          Data to be transmitted is in a buffer. The receiver
+ *          of the send is expected to reply to the message and
+ *          a buffer is provided into which IUCV moves the reply
+ *          to this message.
+ * Input: pathid - Path identification number.
+ *        trgcls - Specifies target class.
+ *        srccls - Specifies the source message class.
+ *        msgtag - Specifies a tag associated with the message.
  *        flags1 - Option for path.
  *          IPPRTY- 0x20 Specifies if you want to send priority message.
- *        buffer - Address of send buffer.                         
- *        buflen - Length of send buffer.                          
- *        ansbuf - Address of buffer into which IUCV moves the reply of 
- *                 this message.        
- *        anslen - Address of length of buffer.          
- * Output: msgid - Specifies the message ID.                      
- * Return: Return code from CP IUCV call.                      
- *         (-EINVAL) - Buffer or ansbuf address is NULL.    
+ *        buffer - Address of send buffer.
+ *        buflen - Length of send buffer.
+ *        ansbuf - Address of buffer into which IUCV moves the reply of
+ *                 this message.
+ *        anslen - Address of length of buffer.
+ * Output: msgid - Specifies the message ID.
+ * Return: Return code from CP IUCV call.
+ *         (-EINVAL) - Buffer or ansbuf address is NULL.
 */
 int iucv_send2way (u16 pathid,
 		   u32 * msgid,
@@ -726,28 +726,28 @@ int iucv_send2way (u16 pathid,
 		   int flags1,
 		   void *buffer, ulong buflen, void *ansbuf, ulong anslen);
 
-/*                                                                    
- * Name: iucv_send2way_array                                          
- * Purpose: This function transmits data to another application.      
- *          The contents of buffer is the address of the array of     
- *          addresses and lengths of discontiguous buffers that hold  
- *          the message text. The receiver of the send is expected to 
- *          reply to the message and a buffer is provided into which  
- *          IUCV moves the reply to this message.                     
- * Input: pathid - Path identification number.                         
- *        trgcls - Specifies target class.                             
- *        srccls - Specifies the source message class.                 
- *        msgtag - Specifies a tag to be associated with the message.   
+/*
+ * Name: iucv_send2way_array
+ * Purpose: This function transmits data to another application.
+ *          The contents of buffer is the address of the array of
+ *          addresses and lengths of discontiguous buffers that hold
+ *          the message text. The receiver of the send is expected to
+ *          reply to the message and a buffer is provided into which
+ *          IUCV moves the reply to this message.
+ * Input: pathid - Path identification number.
+ *        trgcls - Specifies target class.
+ *        srccls - Specifies the source message class.
+ *        msgtag - Specifies a tag to be associated with the message.
  *        flags1 - Option for path.
  *          IPPRTY- 0x20 Specifies if you want to send priority message.
- *        buffer - Sddress of array of send buffers.                   
- *        buflen - Total length of send buffers.                       
- *        ansbuf - Address of array of buffer into which IUCV moves the reply            
- *                 of this message.                         
- *        anslen - Address of length reply buffers.              
- * Output: msgid - Specifies the message ID.                          
- * Return: Return code from CP IUCV call.                          
- *         (-EINVAL) - Buffer address is NULL.                              
+ *        buffer - Sddress of array of send buffers.
+ *        buflen - Total length of send buffers.
+ *        ansbuf - Address of array of buffer into which IUCV moves the reply
+ *                 of this message.
+ *        anslen - Address of length reply buffers.
+ * Output: msgid - Specifies the message ID.
+ * Return: Return code from CP IUCV call.
+ *         (-EINVAL) - Buffer address is NULL.
 */
 int iucv_send2way_array (u16 pathid,
 			 u32 * msgid,
@@ -758,27 +758,27 @@ int iucv_send2way_array (u16 pathid,
 			 iucv_array_t * buffer,
 			 ulong buflen, iucv_array_t * ansbuf, ulong anslen);
 
-/*                                                                     
- * Name: iucv_send2way_prmmsg                                          
- * Purpose: This function transmits data to another application.       
- *          Prmmsg specifies that the 8-bytes of data are to be moved  
- *          into the parameter list. This is a two-way message and the 
- *          receiver of the message is expected to reply. A buffer     
- *          is provided into which IUCV moves the reply to this        
- *          message.                                                   
- * Input: pathid - Rath identification number.                          
- *        trgcls - Specifies target class.                              
- *        srccls - Specifies the source message class.                  
- *        msgtag - Specifies a tag to be associated with the message.   
+/*
+ * Name: iucv_send2way_prmmsg
+ * Purpose: This function transmits data to another application.
+ *          Prmmsg specifies that the 8-bytes of data are to be moved
+ *          into the parameter list. This is a two-way message and the
+ *          receiver of the message is expected to reply. A buffer
+ *          is provided into which IUCV moves the reply to this
+ *          message.
+ * Input: pathid - Rath identification number.
+ *        trgcls - Specifies target class.
+ *        srccls - Specifies the source message class.
+ *        msgtag - Specifies a tag to be associated with the message.
  *        flags1 - Option for path.
  *          IPPRTY- 0x20 Specifies if you want to send priority message.
- *        prmmsg - 8-bytes of data to be placed in parameter list.      
- *        ansbuf - Address of buffer into which IUCV moves the reply of    
+ *        prmmsg - 8-bytes of data to be placed in parameter list.
+ *        ansbuf - Address of buffer into which IUCV moves the reply of
  *                 this message.
- *        anslen - Address of length of buffer.               
- * Output: msgid - Specifies the message ID.                           
- * Return: Return code from CP IUCV call.                           
- *         (-EINVAL) - Buffer address is NULL.         
+ *        anslen - Address of length of buffer.
+ * Output: msgid - Specifies the message ID.
+ * Return: Return code from CP IUCV call.
+ *         (-EINVAL) - Buffer address is NULL.
 */
 int iucv_send2way_prmmsg (u16 pathid,
 			  u32 * msgid,
@@ -788,29 +788,29 @@ int iucv_send2way_prmmsg (u16 pathid,
 			  ulong flags1,
 			  uchar prmmsg[8], void *ansbuf, ulong anslen);
 
-/*                                                                      
- * Name: iucv_send2way_prmmsg_array                                     
- * Purpose: This function transmits data to another application.        
- *          Prmmsg specifies that the 8-bytes of data are to be moved   
- *          into the parameter list. This is a two-way message and the  
- *          receiver of the message is expected to reply. A buffer      
- *          is provided into which IUCV moves the reply to this         
- *          message. The contents of ansbuf is the address of the       
- *          array of addresses and lengths of discontiguous buffers     
- *          that contain the reply.                                     
- * Input: pathid - Path identification number.                           
- *        trgcls - Specifies target class.                               
- *        srccls - Specifies the source message class.                   
- *        msgtag - Specifies a tag to be associated with the message.    
+/*
+ * Name: iucv_send2way_prmmsg_array
+ * Purpose: This function transmits data to another application.
+ *          Prmmsg specifies that the 8-bytes of data are to be moved
+ *          into the parameter list. This is a two-way message and the
+ *          receiver of the message is expected to reply. A buffer
+ *          is provided into which IUCV moves the reply to this
+ *          message. The contents of ansbuf is the address of the
+ *          array of addresses and lengths of discontiguous buffers
+ *          that contain the reply.
+ * Input: pathid - Path identification number.
+ *        trgcls - Specifies target class.
+ *        srccls - Specifies the source message class.
+ *        msgtag - Specifies a tag to be associated with the message.
  *        flags1 - Option for path.
  *          IPPRTY- 0x20 specifies if you want to send priority message.
- *        prmmsg - 8-bytes of data to be placed into the parameter list. 
+ *        prmmsg - 8-bytes of data to be placed into the parameter list.
  *        ansbuf - Address of array of buffer into which IUCV moves the reply
- *                 of this message.  
- *        anslen - Address of length of reply buffers.                
- * Output: msgid - Specifies the message ID.      
- * Return: Return code from CP IUCV call.      
- *         (-EINVAL) - Ansbuf address is NULL.          
+ *                 of this message.
+ *        anslen - Address of length of reply buffers.
+ * Output: msgid - Specifies the message ID.
+ * Return: Return code from CP IUCV call.
+ *         (-EINVAL) - Ansbuf address is NULL.
 */
 int iucv_send2way_prmmsg_array (u16 pathid,
 				u32 * msgid,
@@ -821,29 +821,29 @@ int iucv_send2way_prmmsg_array (u16 pathid,
 				uchar prmmsg[8],
 				iucv_array_t * ansbuf, ulong anslen);
 
-/*                                                                   
- * Name: iucv_setmask                                                
- * Purpose: This function enables or disables the following IUCV     
- *          external interruptions: Nonpriority and priority message 
- *          interrupts, nonpriority and priority reply interrupts.   
+/*
+ * Name: iucv_setmask
+ * Purpose: This function enables or disables the following IUCV
+ *          external interruptions: Nonpriority and priority message
+ *          interrupts, nonpriority and priority reply interrupts.
  * Input: SetMaskFlag - options for interrupts
- *           0x80 - Nonpriority_MessagePendingInterruptsFlag         
- *           0x40 - Priority_MessagePendingInterruptsFlag            
- *           0x20 - Nonpriority_MessageCompletionInterruptsFlag      
- *           0x10 - Priority_MessageCompletionInterruptsFlag         
+ *           0x80 - Nonpriority_MessagePendingInterruptsFlag
+ *           0x40 - Priority_MessagePendingInterruptsFlag
+ *           0x20 - Nonpriority_MessageCompletionInterruptsFlag
+ *           0x10 - Priority_MessageCompletionInterruptsFlag
  *           0x08 - IUCVControlInterruptsFlag
- * Output: NA                                                        
- * Return: Return code from CP IUCV call.                         
+ * Output: NA
+ * Return: Return code from CP IUCV call.
 */
 int iucv_setmask (int SetMaskFlag);
 
-/*                                                  
- * Name: iucv_sever                                 
- * Purpose: This function terminates an IUCV path.  
- * Input: pathid - Path identification number.       
- *        user_data - 16-bytes of user data.         
- * Output: NA       
- * Return: Return code from CP IUCV call.                                
- *         (-EINVAL) - Interal error, wild pointer.       
+/*
+ * Name: iucv_sever
+ * Purpose: This function terminates an IUCV path.
+ * Input: pathid - Path identification number.
+ *        user_data - 16-bytes of user data.
+ * Output: NA
+ * Return: Return code from CP IUCV call.
+ *         (-EINVAL) - Interal error, wild pointer.
 */
 int iucv_sever (u16 pathid, uchar user_data[16]);
diff --git a/drivers/s390/net/lcs.c b/drivers/s390/net/lcs.c
index 5d6b7a57b02f..f94419b334f7 100644
--- a/drivers/s390/net/lcs.c
+++ b/drivers/s390/net/lcs.c
@@ -68,6 +68,7 @@ static void lcs_tasklet(unsigned long);
 static void lcs_start_kernel_thread(struct lcs_card *card);
 static void lcs_get_frames_cb(struct lcs_channel *, struct lcs_buffer *);
 static int lcs_send_delipm(struct lcs_card *, struct lcs_ipm_list *);
+static int lcs_recovery(void *ptr);
 
 /**
  * Debug Facility Stuff
@@ -429,12 +430,6 @@ lcs_setup_card(struct lcs_card *card)
 	card->tx_buffer = NULL;
 	card->tx_emitted = 0;
 
-	/* Initialize kernel thread task used for LGW commands. */
-	INIT_WORK(&card->kernel_thread_starter,
-		  (void *)lcs_start_kernel_thread,card);
-	card->thread_start_mask = 0;
-	card->thread_allowed_mask = 0;
-	card->thread_running_mask = 0;
 	init_waitqueue_head(&card->wait_q);
 	spin_lock_init(&card->lock);
 	spin_lock_init(&card->ipm_lock);
@@ -675,8 +670,9 @@ lcs_ready_buffer(struct lcs_channel *channel, struct lcs_buffer *buffer)
 	int index, rc;
 
 	LCS_DBF_TEXT(5, trace, "rdybuff");
-	BUG_ON(buffer->state != BUF_STATE_LOCKED &&
-		buffer->state != BUF_STATE_PROCESSED);
+	if (buffer->state != BUF_STATE_LOCKED &&
+	    buffer->state != BUF_STATE_PROCESSED)
+		BUG();
 	spin_lock_irqsave(get_ccwdev_lock(channel->ccwdev), flags);
 	buffer->state = BUF_STATE_READY;
 	index = buffer - channel->iob;
@@ -700,7 +696,8 @@ __lcs_processed_buffer(struct lcs_channel *channel, struct lcs_buffer *buffer)
 	int index, prev, next;
 
 	LCS_DBF_TEXT(5, trace, "prcsbuff");
-	BUG_ON(buffer->state != BUF_STATE_READY);
+	if (buffer->state != BUF_STATE_READY)
+		BUG();
 	buffer->state = BUF_STATE_PROCESSED;
 	index = buffer - channel->iob;
 	prev = (index - 1) & (LCS_NUM_BUFFS - 1);
@@ -732,8 +729,9 @@ lcs_release_buffer(struct lcs_channel *channel, struct lcs_buffer *buffer)
 	unsigned long flags;
 
 	LCS_DBF_TEXT(5, trace, "relbuff");
-	BUG_ON(buffer->state != BUF_STATE_LOCKED &&
-		buffer->state != BUF_STATE_PROCESSED);
+	if (buffer->state != BUF_STATE_LOCKED &&
+	    buffer->state != BUF_STATE_PROCESSED)
+		BUG();
 	spin_lock_irqsave(get_ccwdev_lock(channel->ccwdev), flags);
 	buffer->state = BUF_STATE_EMPTY;
 	spin_unlock_irqrestore(get_ccwdev_lock(channel->ccwdev), flags);
@@ -1147,8 +1145,6 @@ list_modified:
 		list_add_tail(&ipm->list, &card->ipm_list);
 	}
 	spin_unlock_irqrestore(&card->ipm_lock, flags);
-	if (card->state == DEV_STATE_UP)
-		netif_wake_queue(card->dev);
 }
 
 /**
@@ -1231,17 +1227,17 @@ lcs_set_mc_addresses(struct lcs_card *card, struct in_device *in4_dev)
 		if (ipm != NULL)
 			continue;	/* Address already in list. */
 		ipm = (struct lcs_ipm_list *)
-			kmalloc(sizeof(struct lcs_ipm_list), GFP_ATOMIC);
+			kzalloc(sizeof(struct lcs_ipm_list), GFP_ATOMIC);
 		if (ipm == NULL) {
 			PRINT_INFO("Not enough memory to add "
 				   "new multicast entry!\n");
 			break;
 		}
-		memset(ipm, 0, sizeof(struct lcs_ipm_list));
 		memcpy(&ipm->ipm.mac_addr, buf, LCS_MAC_LENGTH);
 		ipm->ipm.ip_addr = im4->multiaddr;
 		ipm->ipm_state = LCS_IPM_STATE_SET_REQUIRED;
 		spin_lock_irqsave(&card->ipm_lock, flags);
+		LCS_DBF_HEX(2,trace,&ipm->ipm.ip_addr,4);
 		list_add(&ipm->list, &card->ipm_list);
 		spin_unlock_irqrestore(&card->ipm_lock, flags);
 	}
@@ -1269,7 +1265,15 @@ lcs_register_mc_addresses(void *data)
 	read_unlock(&in4_dev->mc_list_lock);
 	in_dev_put(in4_dev);
 
+	netif_carrier_off(card->dev);
+	netif_tx_disable(card->dev);
+	wait_event(card->write.wait_q,
+			(card->write.state != CH_STATE_RUNNING));
 	lcs_fix_multicast_list(card);
+	if (card->state == DEV_STATE_UP) {
+		netif_carrier_on(card->dev);
+		netif_wake_queue(card->dev);
+	}
 out:
 	lcs_clear_thread_running_bit(card, LCS_SET_MC_THREAD);
 	return 0;
@@ -1286,7 +1290,7 @@ lcs_set_multicast_list(struct net_device *dev)
         LCS_DBF_TEXT(4, trace, "setmulti");
         card = (struct lcs_card *) dev->priv;
 
-        if (!lcs_set_thread_start_bit(card, LCS_SET_MC_THREAD)) 
+        if (!lcs_set_thread_start_bit(card, LCS_SET_MC_THREAD))
 		schedule_work(&card->kernel_thread_starter);
 }
 
@@ -1318,6 +1322,53 @@ lcs_check_irb_error(struct ccw_device *cdev, struct irb *irb)
 	return PTR_ERR(irb);
 }
 
+static int
+lcs_get_problem(struct ccw_device *cdev, struct irb *irb)
+{
+	int dstat, cstat;
+	char *sense;
+
+	sense = (char *) irb->ecw;
+	cstat = irb->scsw.cstat;
+	dstat = irb->scsw.dstat;
+
+	if (cstat & (SCHN_STAT_CHN_CTRL_CHK | SCHN_STAT_INTF_CTRL_CHK |
+		     SCHN_STAT_CHN_DATA_CHK | SCHN_STAT_CHAIN_CHECK |
+		     SCHN_STAT_PROT_CHECK   | SCHN_STAT_PROG_CHECK)) {
+		LCS_DBF_TEXT(2, trace, "CGENCHK");
+		return 1;
+	}
+	if (dstat & DEV_STAT_UNIT_CHECK) {
+		if (sense[LCS_SENSE_BYTE_1] &
+		    LCS_SENSE_RESETTING_EVENT) {
+			LCS_DBF_TEXT(2, trace, "REVIND");
+			return 1;
+		}
+		if (sense[LCS_SENSE_BYTE_0] &
+		    LCS_SENSE_CMD_REJECT) {
+			LCS_DBF_TEXT(2, trace, "CMDREJ");
+			return 0;
+		}
+		if ((!sense[LCS_SENSE_BYTE_0]) &&
+		    (!sense[LCS_SENSE_BYTE_1]) &&
+		    (!sense[LCS_SENSE_BYTE_2]) &&
+		    (!sense[LCS_SENSE_BYTE_3])) {
+			LCS_DBF_TEXT(2, trace, "ZEROSEN");
+			return 0;
+		}
+		LCS_DBF_TEXT(2, trace, "DGENCHK");
+		return 1;
+	}
+	return 0;
+}
+
+void
+lcs_schedule_recovery(struct lcs_card *card)
+{
+	LCS_DBF_TEXT(2, trace, "startrec");
+	if (!lcs_set_thread_start_bit(card, LCS_RECOVERY_THREAD))
+		schedule_work(&card->kernel_thread_starter);
+}
 
 /**
  * IRQ Handler for LCS channels
@@ -1327,7 +1378,8 @@ lcs_irq(struct ccw_device *cdev, unsigned long intparm, struct irb *irb)
 {
 	struct lcs_card *card;
 	struct lcs_channel *channel;
-	int index;
+	int rc, index;
+	int cstat, dstat;
 
 	if (lcs_check_irb_error(cdev, irb))
 		return;
@@ -1338,17 +1390,30 @@ lcs_irq(struct ccw_device *cdev, unsigned long intparm, struct irb *irb)
 	else
 		channel = &card->write;
 
+	cstat = irb->scsw.cstat;
+	dstat = irb->scsw.dstat;
 	LCS_DBF_TEXT_(5, trace, "Rint%s",cdev->dev.bus_id);
 	LCS_DBF_TEXT_(5, trace, "%4x%4x",irb->scsw.cstat, irb->scsw.dstat);
 	LCS_DBF_TEXT_(5, trace, "%4x%4x",irb->scsw.fctl, irb->scsw.actl);
 
+	/* Check for channel and device errors presented */
+	rc = lcs_get_problem(cdev, irb);
+	if (rc || (dstat & DEV_STAT_UNIT_EXCEP)) {
+		PRINT_WARN("check on device %s, dstat=0x%X, cstat=0x%X \n",
+			    cdev->dev.bus_id, dstat, cstat);
+		if (rc) {
+			lcs_schedule_recovery(card);
+			wake_up(&card->wait_q);
+			return;
+		}
+	}
 	/* How far in the ccw chain have we processed? */
 	if ((channel->state != CH_STATE_INIT) &&
 	    (irb->scsw.fctl & SCSW_FCTL_START_FUNC)) {
-		index = (struct ccw1 *) __va((addr_t) irb->scsw.cpa) 
+		index = (struct ccw1 *) __va((addr_t) irb->scsw.cpa)
 			- channel->ccws;
 		if ((irb->scsw.actl & SCSW_ACTL_SUSPENDED) ||
-		    (irb->scsw.cstat | SCHN_STAT_PCI))
+		    (irb->scsw.cstat & SCHN_STAT_PCI))
 			/* Bloody io subsystem tells us lies about cpa... */
 			index = (index - 1) & (LCS_NUM_BUFFS - 1);
 		while (channel->io_idx != index) {
@@ -1367,7 +1432,6 @@ lcs_irq(struct ccw_device *cdev, unsigned long intparm, struct irb *irb)
 	else if (irb->scsw.actl & SCSW_ACTL_SUSPENDED)
 		/* CCW execution stopped on a suspend bit. */
 		channel->state = CH_STATE_SUSPENDED;
-
 	if (irb->scsw.fctl & SCSW_FCTL_HALT_FUNC) {
 		if (irb->scsw.cc != 0) {
 			ccw_device_halt(channel->ccwdev, (addr_t) channel);
@@ -1376,7 +1440,6 @@ lcs_irq(struct ccw_device *cdev, unsigned long intparm, struct irb *irb)
 		/* The channel has been stopped by halt_IO. */
 		channel->state = CH_STATE_HALTED;
 	}
-
 	if (irb->scsw.fctl & SCSW_FCTL_CLEAR_FUNC) {
 		channel->state = CH_STATE_CLEARED;
 	}
@@ -1452,7 +1515,7 @@ lcs_txbuffer_cb(struct lcs_channel *channel, struct lcs_buffer *buffer)
 	lcs_release_buffer(channel, buffer);
 	card = (struct lcs_card *)
 		((char *) channel - offsetof(struct lcs_card, write));
-	if (netif_queue_stopped(card->dev))
+	if (netif_queue_stopped(card->dev) && netif_carrier_ok(card->dev))
 		netif_wake_queue(card->dev);
 	spin_lock(&card->lock);
 	card->tx_emitted--;
@@ -1488,6 +1551,10 @@ __lcs_start_xmit(struct lcs_card *card, struct sk_buff *skb,
 		card->stats.tx_carrier_errors++;
 		return 0;
 	}
+	if (skb->protocol == htons(ETH_P_IPV6)) {
+		dev_kfree_skb(skb);
+		return 0;
+	}
 	netif_stop_queue(card->dev);
 	spin_lock(&card->lock);
 	if (card->tx_buffer != NULL &&
@@ -1633,30 +1700,6 @@ lcs_detect(struct lcs_card *card)
 }
 
 /**
- * reset card
- */
-static int
-lcs_resetcard(struct lcs_card *card)
-{
-	int retries;
-
-	LCS_DBF_TEXT(2, trace, "rescard");
-	for (retries = 0; retries < 10; retries++) {
-		if (lcs_detect(card) == 0) {
-			netif_wake_queue(card->dev);
-			card->state = DEV_STATE_UP;
-			PRINT_INFO("LCS device %s successfully restarted!\n",
-				   card->dev->name);
-			return 0;
-		}
-		msleep(3000);
-	}
-	PRINT_ERR("Error in Reseting LCS card!\n");
-	return -EIO;
-}
-
-
-/**
  * LCS Stop card
  */
 static int
@@ -1680,126 +1723,18 @@ lcs_stopcard(struct lcs_card *card)
 }
 
 /**
- * LGW initiated commands
- */
-static int
-lcs_lgw_startlan_thread(void *data)
-{
-	struct lcs_card *card;
-
-	card = (struct lcs_card *) data;
-	daemonize("lgwstpln");
-
-	if (!lcs_do_run_thread(card, LCS_STARTLAN_THREAD))
-		return 0;
-	LCS_DBF_TEXT(4, trace, "lgwstpln");
-	if (card->dev)
-		netif_stop_queue(card->dev);
-	if (lcs_startlan(card) == 0) {
-		netif_wake_queue(card->dev);
-		card->state = DEV_STATE_UP;
-		PRINT_INFO("LCS Startlan for device %s succeeded!\n",
-			   card->dev->name);
-
-	} else
-		PRINT_ERR("LCS Startlan for device %s failed!\n",
-			  card->dev->name);
-	lcs_clear_thread_running_bit(card, LCS_STARTLAN_THREAD);
-	return 0;
-}
-
-/**
- * Send startup command initiated by Lan Gateway
- */
-static int
-lcs_lgw_startup_thread(void *data)
-{
-	int rc;
-
-	struct lcs_card *card;
-
-	card = (struct lcs_card *) data;
-	daemonize("lgwstaln");
-
-	if (!lcs_do_run_thread(card, LCS_STARTUP_THREAD))
-		return 0;
-	LCS_DBF_TEXT(4, trace, "lgwstaln");
-	if (card->dev)
-		netif_stop_queue(card->dev);
-	rc = lcs_send_startup(card, LCS_INITIATOR_LGW);
-	if (rc != 0) {
-		PRINT_ERR("Startup for LCS device %s initiated " \
-			  "by LGW failed!\nReseting card ...\n",
-			  card->dev->name);
-		/* do a card reset */
-		rc = lcs_resetcard(card);
-		if (rc == 0)
-			goto Done;
-	}
-	rc = lcs_startlan(card);
-	if (rc == 0) {
-		netif_wake_queue(card->dev);
-		card->state = DEV_STATE_UP;
-	}
-Done:
-	if (rc == 0)
-		PRINT_INFO("LCS Startup for device %s succeeded!\n",
-			   card->dev->name);
-	else
-		PRINT_ERR("LCS Startup for device %s failed!\n",
-			  card->dev->name);
-	lcs_clear_thread_running_bit(card, LCS_STARTUP_THREAD);
-	return 0;
-}
-
-
-/**
- * send stoplan command initiated by Lan Gateway
- */
-static int
-lcs_lgw_stoplan_thread(void *data)
-{
-	struct lcs_card *card;
-	int rc;
-
-	card = (struct lcs_card *) data;
-	daemonize("lgwstop");
-
-	if (!lcs_do_run_thread(card, LCS_STOPLAN_THREAD))
-		return 0;
-	LCS_DBF_TEXT(4, trace, "lgwstop");
-	if (card->dev)
-		netif_stop_queue(card->dev);
-	if (lcs_send_stoplan(card, LCS_INITIATOR_LGW) == 0)
-		PRINT_INFO("Stoplan for %s initiated by LGW succeeded!\n",
-			   card->dev->name);
-	else
-		PRINT_ERR("Stoplan %s initiated by LGW failed!\n",
-			  card->dev->name);
-	/*Try to reset the card, stop it on failure */
-        rc = lcs_resetcard(card);
-        if (rc != 0)
-                rc = lcs_stopcard(card);
-	lcs_clear_thread_running_bit(card, LCS_STOPLAN_THREAD);
-        return rc;
-}
-
-/**
  * Kernel Thread helper functions for LGW initiated commands
  */
 static void
 lcs_start_kernel_thread(struct lcs_card *card)
 {
 	LCS_DBF_TEXT(5, trace, "krnthrd");
-	if (lcs_do_start_thread(card, LCS_STARTUP_THREAD))
-		kernel_thread(lcs_lgw_startup_thread, (void *) card, SIGCHLD);
-	if (lcs_do_start_thread(card, LCS_STARTLAN_THREAD))
-		kernel_thread(lcs_lgw_startlan_thread, (void *) card, SIGCHLD);
-	if (lcs_do_start_thread(card, LCS_STOPLAN_THREAD))
-		kernel_thread(lcs_lgw_stoplan_thread, (void *) card, SIGCHLD);
+	if (lcs_do_start_thread(card, LCS_RECOVERY_THREAD))
+		kernel_thread(lcs_recovery, (void *) card, SIGCHLD);
 #ifdef CONFIG_IP_MULTICAST
 	if (lcs_do_start_thread(card, LCS_SET_MC_THREAD))
-		kernel_thread(lcs_register_mc_addresses, (void *) card, SIGCHLD);
+		kernel_thread(lcs_register_mc_addresses,
+				(void *) card, SIGCHLD);
 #endif
 }
 
@@ -1813,19 +1748,14 @@ lcs_get_control(struct lcs_card *card, struct lcs_cmd *cmd)
 	if (cmd->initiator == LCS_INITIATOR_LGW) {
 		switch(cmd->cmd_code) {
 		case LCS_CMD_STARTUP:
-			if (!lcs_set_thread_start_bit(card,
-						      LCS_STARTUP_THREAD))
-				schedule_work(&card->kernel_thread_starter);
-			break;
 		case LCS_CMD_STARTLAN:
-			if (!lcs_set_thread_start_bit(card,
-						      LCS_STARTLAN_THREAD))
-				schedule_work(&card->kernel_thread_starter);
+			lcs_schedule_recovery(card);
 			break;
 		case LCS_CMD_STOPLAN:
-			if (!lcs_set_thread_start_bit(card,
-						      LCS_STOPLAN_THREAD))
-				schedule_work(&card->kernel_thread_starter);
+			PRINT_WARN("Stoplan for %s initiated by LGW.\n",
+					card->dev->name);
+			if (card->dev)
+				netif_carrier_off(card->dev);
 			break;
 		default:
 			PRINT_INFO("UNRECOGNIZED LGW COMMAND\n");
@@ -1941,8 +1871,11 @@ lcs_stop_device(struct net_device *dev)
 
 	LCS_DBF_TEXT(2, trace, "stopdev");
 	card   = (struct lcs_card *) dev->priv;
-	netif_stop_queue(dev);
+	netif_carrier_off(dev);
+	netif_tx_disable(dev);
 	dev->flags &= ~IFF_UP;
+	wait_event(card->write.wait_q,
+		(card->write.state != CH_STATE_RUNNING));
 	rc = lcs_stopcard(card);
 	if (rc)
 		PRINT_ERR("Try it again!\n ");
@@ -1968,6 +1901,7 @@ lcs_open_device(struct net_device *dev)
 
 	} else {
 		dev->flags |= IFF_UP;
+		netif_carrier_on(dev);
 		netif_wake_queue(dev);
 		card->state = DEV_STATE_UP;
 	}
@@ -2059,10 +1993,31 @@ lcs_timeout_store (struct device *dev, struct device_attribute *attr, const char
 
 DEVICE_ATTR(lancmd_timeout, 0644, lcs_timeout_show, lcs_timeout_store);
 
+static ssize_t
+lcs_dev_recover_store(struct device *dev, struct device_attribute *attr,
+		      const char *buf, size_t count)
+{
+	struct lcs_card *card = dev->driver_data;
+	char *tmp;
+	int i;
+
+	if (!card)
+		return -EINVAL;
+	if (card->state != DEV_STATE_UP)
+		return -EPERM;
+	i = simple_strtoul(buf, &tmp, 16);
+	if (i == 1)
+		lcs_schedule_recovery(card);
+	return count;
+}
+
+static DEVICE_ATTR(recover, 0200, NULL, lcs_dev_recover_store);
+
 static struct attribute * lcs_attrs[] = {
 	&dev_attr_portno.attr,
 	&dev_attr_type.attr,
 	&dev_attr_lancmd_timeout.attr,
+	&dev_attr_recover.attr,
 	NULL,
 };
 
@@ -2099,6 +2054,12 @@ lcs_probe_device(struct ccwgroup_device *ccwgdev)
 	ccwgdev->dev.driver_data = card;
 	ccwgdev->cdev[0]->handler = lcs_irq;
 	ccwgdev->cdev[1]->handler = lcs_irq;
+	card->gdev = ccwgdev;
+	INIT_WORK(&card->kernel_thread_starter,
+		  (void *) lcs_start_kernel_thread, card);
+	card->thread_start_mask = 0;
+	card->thread_allowed_mask = 0;
+	card->thread_running_mask = 0;
         return 0;
 }
 
@@ -2200,6 +2161,7 @@ netdev_out:
 	if (recover_state == DEV_STATE_RECOVER) {
 		lcs_set_multicast_list(card->dev);
 		card->dev->flags |= IFF_UP;
+		netif_carrier_on(card->dev);
 		netif_wake_queue(card->dev);
 		card->state = DEV_STATE_UP;
 	} else {
@@ -2229,7 +2191,7 @@ out:
  * lcs_shutdown_device, called when setting the group device offline.
  */
 static int
-lcs_shutdown_device(struct ccwgroup_device *ccwgdev)
+__lcs_shutdown_device(struct ccwgroup_device *ccwgdev, int recovery_mode)
 {
 	struct lcs_card *card;
 	enum lcs_dev_states recover_state;
@@ -2239,9 +2201,11 @@ lcs_shutdown_device(struct ccwgroup_device *ccwgdev)
 	card = (struct lcs_card *)ccwgdev->dev.driver_data;
 	if (!card)
 		return -ENODEV;
-	lcs_set_allowed_threads(card, 0);
-	if (lcs_wait_for_threads(card, LCS_SET_MC_THREAD))
-		return -ERESTARTSYS;
+	if (recovery_mode == 0) {
+		lcs_set_allowed_threads(card, 0);
+		if (lcs_wait_for_threads(card, LCS_SET_MC_THREAD))
+			return -ERESTARTSYS;
+	}
 	LCS_DBF_HEX(3, setup, &card, sizeof(void*));
 	recover_state = card->state;
 
@@ -2256,6 +2220,43 @@ lcs_shutdown_device(struct ccwgroup_device *ccwgdev)
 	return 0;
 }
 
+static int
+lcs_shutdown_device(struct ccwgroup_device *ccwgdev)
+{
+	return __lcs_shutdown_device(ccwgdev, 0);
+}
+
+/**
+ * drive lcs recovery after startup and startlan initiated by Lan Gateway
+ */
+static int
+lcs_recovery(void *ptr)
+{
+	struct lcs_card *card;
+	struct ccwgroup_device *gdev;
+        int rc;
+
+	card = (struct lcs_card *) ptr;
+	daemonize("lcs_recover");
+
+	LCS_DBF_TEXT(4, trace, "recover1");
+	if (!lcs_do_run_thread(card, LCS_RECOVERY_THREAD))
+		return 0;
+	LCS_DBF_TEXT(4, trace, "recover2");
+	gdev = card->gdev;
+	PRINT_WARN("Recovery of device %s started...\n", gdev->dev.bus_id);
+	rc = __lcs_shutdown_device(gdev, 1);
+	rc = lcs_new_device(gdev);
+	if (!rc)
+		PRINT_INFO("Device %s successfully recovered!\n",
+				card->dev->name);
+	else
+		PRINT_INFO("Device %s could not be recovered!\n",
+				card->dev->name);
+	lcs_clear_thread_running_bit(card, LCS_RECOVERY_THREAD);
+	return 0;
+}
+
 /**
  * lcs_remove_device, free buffers and card
  */
diff --git a/drivers/s390/net/lcs.h b/drivers/s390/net/lcs.h
index 2fad5e40c2e4..93143932983b 100644
--- a/drivers/s390/net/lcs.h
+++ b/drivers/s390/net/lcs.h
@@ -73,13 +73,17 @@ do {                                       \
 /**
  * LCS sense byte definitions
  */
+#define LCS_SENSE_BYTE_0 		0
+#define LCS_SENSE_BYTE_1 		1
+#define LCS_SENSE_BYTE_2 		2
+#define LCS_SENSE_BYTE_3 		3
 #define LCS_SENSE_INTERFACE_DISCONNECT	0x01
 #define LCS_SENSE_EQUIPMENT_CHECK	0x10
 #define LCS_SENSE_BUS_OUT_CHECK		0x20
 #define LCS_SENSE_INTERVENTION_REQUIRED 0x40
 #define LCS_SENSE_CMD_REJECT		0x80
-#define LCS_SENSE_RESETTING_EVENT	0x0080
-#define LCS_SENSE_DEVICE_ONLINE		0x0020
+#define LCS_SENSE_RESETTING_EVENT	0x80
+#define LCS_SENSE_DEVICE_ONLINE		0x20
 
 /**
  * LCS packet type definitions
@@ -152,10 +156,9 @@ enum lcs_dev_states {
 
 enum lcs_threads {
 	LCS_SET_MC_THREAD 	= 1,
-	LCS_STARTLAN_THREAD	= 2,
-	LCS_STOPLAN_THREAD	= 4,
-	LCS_STARTUP_THREAD	= 8,
+	LCS_RECOVERY_THREAD 	= 2,
 };
+
 /**
  * LCS struct declarations
  */
@@ -286,6 +289,7 @@ struct lcs_card {
 	struct net_device_stats stats;
 	unsigned short (*lan_type_trans)(struct sk_buff *skb,
 					 struct net_device *dev);
+	struct ccwgroup_device *gdev;
 	struct lcs_channel read;
 	struct lcs_channel write;
 	struct lcs_buffer *tx_buffer;
diff --git a/drivers/s390/net/netiucv.c b/drivers/s390/net/netiucv.c
index 260a93c8c442..b452cc1afd55 100644
--- a/drivers/s390/net/netiucv.c
+++ b/drivers/s390/net/netiucv.c
@@ -30,7 +30,7 @@
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  *
  */
-
+
 #undef DEBUG
 
 #include <linux/module.h>
@@ -65,7 +65,7 @@ MODULE_AUTHOR
     ("(C) 2001 IBM Corporation by Fritz Elfert (felfert@millenux.com)");
 MODULE_DESCRIPTION ("Linux for S/390 IUCV network driver");
 
-
+
 #define PRINTK_HEADER " iucv: "       /* for debugging */
 
 static struct device_driver netiucv_driver = {
@@ -202,7 +202,7 @@ netiucv_printname(char *name)
 	*p = '\0';
 	return tmp;
 }
-
+
 /**
  * States of the interface statemachine.
  */
@@ -244,7 +244,7 @@ static const char *dev_event_names[] = {
 	"Connection up",
 	"Connection down",
 };
-
+
 /**
  * Events of the connection statemachine
  */
@@ -364,7 +364,7 @@ static const char *conn_state_names[] = {
 	"Connect error",
 };
 
-
+
 /**
  * Debug Facility Stuff
  */
@@ -516,7 +516,7 @@ static void
 fsm_action_nop(fsm_instance *fi, int event, void *arg)
 {
 }
-
+
 /**
  * Actions of the connection statemachine
  *****************************************************************************/
@@ -993,7 +993,7 @@ static const fsm_node conn_fsm[] = {
 
 static const int CONN_FSM_LEN = sizeof(conn_fsm) / sizeof(fsm_node);
 
-
+
 /**
  * Actions for interface - statemachine.
  *****************************************************************************/
@@ -1182,7 +1182,7 @@ netiucv_transmit_skb(struct iucv_connection *conn, struct sk_buff *skb) {
 
 		fsm_newstate(conn->fsm, CONN_STATE_TX);
 		conn->prof.send_stamp = xtime;
-		
+
 		rc = iucv_send(conn->pathid, NULL, 0, 0, 1 /* single_flag */,
 			0, nskb->data, nskb->len);
 			       /* Shut up, gcc! nskb is always below 2G. */
@@ -1220,7 +1220,7 @@ netiucv_transmit_skb(struct iucv_connection *conn, struct sk_buff *skb) {
 
 	return rc;
 }
-
+
 /**
  * Interface API for upper network layers
  *****************************************************************************/
@@ -1291,7 +1291,7 @@ static int netiucv_tx(struct sk_buff *skb, struct net_device *dev)
 
 	/**
 	 * If connection is not running, try to restart it
-	 * and throw away packet. 
+	 * and throw away packet.
 	 */
 	if (fsm_getstate(privptr->fsm) != DEV_STATE_RUNNING) {
 		fsm_event(privptr->fsm, DEV_EVENT_START, dev);
@@ -1538,7 +1538,7 @@ static ssize_t
 maxcq_write (struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
 {
 	struct netiucv_priv *priv = dev->driver_data;
-	
+
 	IUCV_DBF_TEXT(trace, 4, __FUNCTION__);
 	priv->conn->prof.maxcqueue = 0;
 	return count;
@@ -1559,7 +1559,7 @@ static ssize_t
 sdoio_write (struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
 {
 	struct netiucv_priv *priv = dev->driver_data;
-	
+
 	IUCV_DBF_TEXT(trace, 4, __FUNCTION__);
 	priv->conn->prof.doios_single = 0;
 	return count;
@@ -1580,7 +1580,7 @@ static ssize_t
 mdoio_write (struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
 {
 	struct netiucv_priv *priv = dev->driver_data;
-	
+
 	IUCV_DBF_TEXT(trace, 5, __FUNCTION__);
 	priv->conn->prof.doios_multi = 0;
 	return count;
@@ -1601,7 +1601,7 @@ static ssize_t
 txlen_write (struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
 {
 	struct netiucv_priv *priv = dev->driver_data;
-	
+
 	IUCV_DBF_TEXT(trace, 4, __FUNCTION__);
 	priv->conn->prof.txlen = 0;
 	return count;
@@ -1622,7 +1622,7 @@ static ssize_t
 txtime_write (struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
 {
 	struct netiucv_priv *priv = dev->driver_data;
-	
+
 	IUCV_DBF_TEXT(trace, 4, __FUNCTION__);
 	priv->conn->prof.tx_time = 0;
 	return count;
@@ -2000,7 +2000,7 @@ conn_write(struct device_driver *drv, const char *buf, size_t count)
 	}
 
 	PRINT_INFO("%s: '%s'\n", dev->name, netiucv_printname(username));
-	
+
 	return count;
 
 out_free_ndev:
@@ -2099,7 +2099,7 @@ static int __init
 netiucv_init(void)
 {
 	int ret;
-	
+
 	ret = iucv_register_dbf_views();
 	if (ret) {
 		PRINT_WARN("netiucv_init failed, "
@@ -2128,7 +2128,7 @@ netiucv_init(void)
 	}
 	return ret;
 }
-	
+
 module_init(netiucv_init);
 module_exit(netiucv_exit);
 MODULE_LICENSE("GPL");
diff --git a/drivers/s390/net/qeth.h b/drivers/s390/net/qeth.h
index 4df0fcd7b10b..619f4a0c7160 100644
--- a/drivers/s390/net/qeth.h
+++ b/drivers/s390/net/qeth.h
@@ -376,7 +376,7 @@ struct qeth_hdr_osn {
 	__u8 reserved3[18];
 	__u32 ccid;
 } __attribute__ ((packed));
-					    
+
 struct qeth_hdr {
 	union {
 		struct qeth_hdr_layer2 l2;
@@ -825,7 +825,7 @@ struct qeth_card {
 	int use_hard_stop;
 	int (*orig_hard_header)(struct sk_buff *,struct net_device *,
 				unsigned short,void *,void *,unsigned);
-	struct qeth_osn_info osn_info; 
+	struct qeth_osn_info osn_info;
 };
 
 struct qeth_card_list_struct {
@@ -944,7 +944,7 @@ qeth_get_netdev_flags(struct qeth_card *card)
 		return 0;
 	switch (card->info.type) {
 	case QETH_CARD_TYPE_IQD:
-	case QETH_CARD_TYPE_OSN:	
+	case QETH_CARD_TYPE_OSN:
 		return IFF_NOARP;
 #ifdef CONFIG_QETH_IPV6
 	default:
@@ -981,7 +981,7 @@ static inline int
 qeth_get_max_mtu_for_card(int cardtype)
 {
 	switch (cardtype) {
-		
+
 	case QETH_CARD_TYPE_UNKNOWN:
 	case QETH_CARD_TYPE_OSAE:
 	case QETH_CARD_TYPE_OSN:
@@ -1097,9 +1097,9 @@ qeth_string_to_ipaddr4(const char *buf, __u8 *addr)
 	int count = 0, rc = 0;
 	int in[4];
 
-	rc = sscanf(buf, "%d.%d.%d.%d%n", 
+	rc = sscanf(buf, "%d.%d.%d.%d%n",
 		    &in[0], &in[1], &in[2], &in[3], &count);
-	if (rc != 4  || count) 
+	if (rc != 4  || count<=0)
 		return -EINVAL;
 	for (count = 0; count < 4; count++) {
 		if (in[count] > 255)
@@ -1131,7 +1131,7 @@ qeth_string_to_ipaddr6(const char *buf, __u8 *addr)
 
 	cnt = out = found = save_cnt = num2 = 0;
         end = start = (char *) buf;
-	in = (__u16 *) addr;	
+	in = (__u16 *) addr;
 	memset(in, 0, 16);
         while (end) {
                 end = strchr(end,':');
@@ -1139,7 +1139,7 @@ qeth_string_to_ipaddr6(const char *buf, __u8 *addr)
                         end = (char *)buf + (strlen(buf));
                         out = 1;
                 }
-                if ((end - start)) { 
+                if ((end - start)) {
                         memset(num, 0, 5);
                         memcpy(num, start, end - start);
 			if (!qeth_isxdigit(num))
@@ -1241,5 +1241,5 @@ qeth_osn_register(unsigned char *read_dev_no,
 
 extern void
 qeth_osn_deregister(struct net_device *);
-		
+
 #endif /* __QETH_H__ */
diff --git a/drivers/s390/net/qeth_eddp.c b/drivers/s390/net/qeth_eddp.c
index 44e226f211e7..0bab60a20309 100644
--- a/drivers/s390/net/qeth_eddp.c
+++ b/drivers/s390/net/qeth_eddp.c
@@ -81,7 +81,7 @@ void
 qeth_eddp_buf_release_contexts(struct qeth_qdio_out_buffer *buf)
 {
 	struct qeth_eddp_context_reference *ref;
-	
+
 	QETH_DBF_TEXT(trace, 6, "eddprctx");
 	while (!list_empty(&buf->ctx_list)){
 		ref = list_entry(buf->ctx_list.next,
@@ -135,7 +135,7 @@ qeth_eddp_fill_buffer(struct qeth_qdio_out_q *queue,
 					   "buffer!\n");
 				goto out;
 			}
-		}		
+		}
 		/* check if the whole next skb fits into current buffer */
 		if ((QETH_MAX_BUFFER_ELEMENTS(queue->card) -
 					buf->next_element_to_fill)
@@ -148,7 +148,7 @@ qeth_eddp_fill_buffer(struct qeth_qdio_out_q *queue,
 			 * and increment ctx's refcnt */
 			must_refcnt = 1;
 			continue;
-		}	
+		}
 		if (must_refcnt){
 			must_refcnt = 0;
 			if (qeth_eddp_buf_ref_context(buf, ctx)){
@@ -266,7 +266,7 @@ qeth_eddp_copy_data_tcp(char *dst, struct qeth_eddp_data *eddp, int len,
 	int left_in_frag;
 	int copy_len;
 	u8 *src;
-	
+
 	QETH_DBF_TEXT(trace, 5, "eddpcdtc");
 	if (skb_shinfo(eddp->skb)->nr_frags == 0) {
 		memcpy(dst, eddp->skb->data + eddp->skb_offset, len);
@@ -408,7 +408,7 @@ __qeth_eddp_fill_context_tcp(struct qeth_eddp_context *ctx,
 	struct tcphdr *tcph;
 	int data_len;
 	u32 hcsum;
-	
+
 	QETH_DBF_TEXT(trace, 5, "eddpftcp");
 	eddp->skb_offset = sizeof(struct qeth_hdr) + eddp->nhl + eddp->thl;
        if (eddp->qh.hdr.l2.id == QETH_HEADER_TYPE_LAYER2) {
@@ -465,13 +465,13 @@ __qeth_eddp_fill_context_tcp(struct qeth_eddp_context *ctx,
 		eddp->th.tcp.h.seq += data_len;
 	}
 }
-			   
+
 static inline int
 qeth_eddp_fill_context_tcp(struct qeth_eddp_context *ctx,
 			   struct sk_buff *skb, struct qeth_hdr *qhdr)
 {
 	struct qeth_eddp_data *eddp = NULL;
-	
+
 	QETH_DBF_TEXT(trace, 5, "eddpficx");
 	/* create our segmentation headers and copy original headers */
 	if (skb->protocol == ETH_P_IP)
@@ -512,7 +512,7 @@ qeth_eddp_calc_num_pages(struct qeth_eddp_context *ctx, struct sk_buff *skb,
 			 int hdr_len)
 {
 	int skbs_per_page;
-	
+
 	QETH_DBF_TEXT(trace, 5, "eddpcanp");
 	/* can we put multiple skbs in one page? */
 	skbs_per_page = PAGE_SIZE / (skb_shinfo(skb)->tso_size + hdr_len);
@@ -588,7 +588,7 @@ qeth_eddp_create_context_tcp(struct qeth_card *card, struct sk_buff *skb,
 			     struct qeth_hdr *qhdr)
 {
 	struct qeth_eddp_context *ctx = NULL;
-	
+
 	QETH_DBF_TEXT(trace, 5, "creddpct");
 	if (skb->protocol == ETH_P_IP)
 		ctx = qeth_eddp_create_context_generic(card, skb,
diff --git a/drivers/s390/net/qeth_fs.h b/drivers/s390/net/qeth_fs.h
index e422b41c656e..61faf05517d6 100644
--- a/drivers/s390/net/qeth_fs.h
+++ b/drivers/s390/net/qeth_fs.h
@@ -42,7 +42,7 @@ qeth_create_device_attributes_osn(struct device *dev);
 
 extern void
 qeth_remove_device_attributes_osn(struct device *dev);
-		    
+
 extern int
 qeth_create_driver_attributes(void);
 
diff --git a/drivers/s390/net/qeth_main.c b/drivers/s390/net/qeth_main.c
index b3c6e7907790..9e671a48cd2f 100644
--- a/drivers/s390/net/qeth_main.c
+++ b/drivers/s390/net/qeth_main.c
@@ -513,7 +513,7 @@ __qeth_set_offline(struct ccwgroup_device *cgdev, int recovery_mode)
 
 	QETH_DBF_TEXT(setup, 3, "setoffl");
 	QETH_DBF_HEX(setup, 3, &card, sizeof(void *));
-	
+
 	if (card->dev && netif_carrier_ok(card->dev))
 		netif_carrier_off(card->dev);
 	recover_flag = card->state;
@@ -604,13 +604,13 @@ __qeth_ref_ip_on_card(struct qeth_card *card, struct qeth_ipaddr *todo,
 	list_for_each_entry(addr, &card->ip_list, entry) {
 		if (card->options.layer2) {
 			if ((addr->type == todo->type) &&
-			    (memcmp(&addr->mac, &todo->mac, 
+			    (memcmp(&addr->mac, &todo->mac,
 				    OSA_ADDR_LEN) == 0)) {
 				found = 1;
 				break;
 			}
 			continue;
-		} 
+		}
 		if ((addr->proto     == QETH_PROT_IPV4)  &&
 		    (todo->proto     == QETH_PROT_IPV4)  &&
 		    (addr->type      == todo->type)      &&
@@ -694,13 +694,13 @@ __qeth_insert_ip_todo(struct qeth_card *card, struct qeth_ipaddr *addr, int add)
 		if (card->options.layer2) {
 			if ((tmp->type	== addr->type)	&&
 			    (tmp->is_multicast == addr->is_multicast) &&
-			    (memcmp(&tmp->mac, &addr->mac, 
+			    (memcmp(&tmp->mac, &addr->mac,
 				    OSA_ADDR_LEN) == 0)) {
 				found = 1;
 				break;
 			}
 			continue;
-		} 	 
+		}
 		if ((tmp->proto        == QETH_PROT_IPV4)     &&
 		    (addr->proto       == QETH_PROT_IPV4)     &&
 		    (tmp->type         == addr->type)         &&
@@ -1173,7 +1173,7 @@ qeth_determine_card_type(struct qeth_card *card)
 					   "due to hardware limitations!\n");
 				card->qdio.no_out_queues = 1;
 				card->qdio.default_out_queue = 0;
-			} 
+			}
 			return 0;
 		}
 		i++;
@@ -1198,7 +1198,7 @@ qeth_probe_device(struct ccwgroup_device *gdev)
 		return -ENODEV;
 
 	QETH_DBF_TEXT_(setup, 2, "%s", gdev->dev.bus_id);
-	
+
 	card = qeth_alloc_card();
 	if (!card) {
 		put_device(dev);
@@ -1220,7 +1220,7 @@ qeth_probe_device(struct ccwgroup_device *gdev)
 		put_device(dev);
 		qeth_free_card(card);
 		return rc;
-	}			    
+	}
 	if ((rc = qeth_setup_card(card))){
 		QETH_DBF_TEXT_(setup, 2, "2err%d", rc);
 		put_device(dev);
@@ -1843,7 +1843,7 @@ struct qeth_cmd_buffer *iob)
 	       &card->seqno.pdu_hdr_ack, QETH_SEQ_NO_LENGTH);
 	QETH_DBF_HEX(control, 2, iob->data, QETH_DBF_CONTROL_LEN);
 }
-						    
+
 static int
 qeth_send_control_data(struct qeth_card *card, int len,
 		       struct qeth_cmd_buffer *iob,
@@ -1937,7 +1937,7 @@ qeth_osn_send_control_data(struct qeth_card *card, int len,
 		wake_up(&card->wait_q);
 	}
 	return rc;
-}					
+}
 
 static inline void
 qeth_prepare_ipa_cmd(struct qeth_card *card, struct qeth_cmd_buffer *iob,
@@ -1966,7 +1966,7 @@ qeth_osn_send_ipa_cmd(struct qeth_card *card, struct qeth_cmd_buffer *iob,
 	memcpy(QETH_IPA_PDU_LEN_PDU3(iob->data), &s2, 2);
 	return qeth_osn_send_control_data(card, s1, iob);
 }
-							    
+
 static int
 qeth_send_ipa_cmd(struct qeth_card *card, struct qeth_cmd_buffer *iob,
 		  int (*reply_cb)
@@ -2579,7 +2579,7 @@ qeth_process_inbound_buffer(struct qeth_card *card,
 		skb->dev = card->dev;
 		if (hdr->hdr.l2.id == QETH_HEADER_TYPE_LAYER2)
 			vlan_tag = qeth_layer2_rebuild_skb(card, skb, hdr);
-		else if (hdr->hdr.l3.id == QETH_HEADER_TYPE_LAYER3)     
+		else if (hdr->hdr.l3.id == QETH_HEADER_TYPE_LAYER3)
 			qeth_rebuild_skb(card, skb, hdr);
 		else { /*in case of OSN*/
 			skb_push(skb, sizeof(struct qeth_hdr));
@@ -2763,7 +2763,7 @@ qeth_qdio_input_handler(struct ccw_device * ccwdev, unsigned int status,
 		index = i % QDIO_MAX_BUFFERS_PER_Q;
 		buffer = &card->qdio.in_q->bufs[index];
 		if (!((status & QDIO_STATUS_LOOK_FOR_ERROR) &&
-		      qeth_check_qdio_errors(buffer->buffer, 
+		      qeth_check_qdio_errors(buffer->buffer,
 					     qdio_err, siga_err,"qinerr")))
 			qeth_process_inbound_buffer(card, buffer, index);
 		/* clear buffer and give back to hardware */
@@ -3187,7 +3187,7 @@ qeth_alloc_qdio_buffers(struct qeth_card *card)
 	if (card->qdio.state == QETH_QDIO_ALLOCATED)
 		return 0;
 
-	card->qdio.in_q = kmalloc(sizeof(struct qeth_qdio_q), 
+	card->qdio.in_q = kmalloc(sizeof(struct qeth_qdio_q),
 				  GFP_KERNEL|GFP_DMA);
 	if (!card->qdio.in_q)
 		return - ENOMEM;
@@ -3476,7 +3476,7 @@ qeth_halt_channels(struct qeth_card *card)
 	rc3 = qeth_halt_channel(&card->data);
 	if (rc1)
 		return rc1;
-	if (rc2) 
+	if (rc2)
 		return rc2;
 	return rc3;
 }
@@ -3491,7 +3491,7 @@ qeth_clear_channels(struct qeth_card *card)
 	rc3 = qeth_clear_channel(&card->data);
 	if (rc1)
 		return rc1;
-	if (rc2) 
+	if (rc2)
 		return rc2;
 	return rc3;
 }
@@ -3798,10 +3798,10 @@ qeth_open(struct net_device *dev)
 		QETH_DBF_TEXT(trace,4,"nomacadr");
 		return -EPERM;
 	}
-	card->dev->flags |= IFF_UP;
-	netif_start_queue(dev);
 	card->data.state = CH_STATE_UP;
 	card->state = CARD_STATE_UP;
+	card->dev->flags |= IFF_UP;
+	netif_start_queue(dev);
 
 	if (!card->lan_online && netif_carrier_ok(dev))
 		netif_carrier_off(dev);
@@ -3817,7 +3817,7 @@ qeth_stop(struct net_device *dev)
 
 	card = (struct qeth_card *) dev->priv;
 
-	netif_stop_queue(dev);
+	netif_tx_disable(dev);
 	card->dev->flags &= ~IFF_UP;
 	if (card->state == CARD_STATE_UP)
 		card->state = CARD_STATE_SOFTSETUP;
@@ -3958,7 +3958,7 @@ qeth_prepare_skb(struct qeth_card *card, struct sk_buff **skb,
 #endif
 	*hdr = (struct qeth_hdr *)
 		qeth_push_skb(card, skb, sizeof(struct qeth_hdr));
-	if (hdr == NULL)
+	if (*hdr == NULL)
 		return -EINVAL;
 	return 0;
 }
@@ -4098,7 +4098,7 @@ qeth_fill_header(struct qeth_card *card, struct qeth_hdr *hdr,
 		}
 	} else { /* passthrough */
                 if((skb->dev->type == ARPHRD_IEEE802_TR) &&
-		    !memcmp(skb->data + sizeof(struct qeth_hdr) + 
+		    !memcmp(skb->data + sizeof(struct qeth_hdr) +
 		    sizeof(__u16), skb->dev->broadcast, 6)) {
 			hdr->hdr.l3.flags = QETH_CAST_BROADCAST |
 						QETH_HDR_PASSTHRU;
@@ -4385,7 +4385,7 @@ out:
 }
 
 static inline int
-qeth_get_elements_no(struct qeth_card *card, void *hdr, 
+qeth_get_elements_no(struct qeth_card *card, void *hdr,
 		     struct sk_buff *skb, int elems)
 {
 	int elements_needed = 0;
@@ -4416,6 +4416,8 @@ qeth_send_packet(struct qeth_card *card, struct sk_buff *skb)
 	enum qeth_large_send_types large_send = QETH_LARGE_SEND_NO;
 	struct qeth_eddp_context *ctx = NULL;
 	int tx_bytes = skb->len;
+	unsigned short nr_frags = skb_shinfo(skb)->nr_frags;
+	unsigned short tso_size = skb_shinfo(skb)->tso_size;
 	int rc;
 
 	QETH_DBF_TEXT(trace, 6, "sendpkt");
@@ -4441,7 +4443,7 @@ qeth_send_packet(struct qeth_card *card, struct sk_buff *skb)
 		return 0;
 	}
 	cast_type = qeth_get_cast_type(card, skb);
-	if ((cast_type == RTN_BROADCAST) && 
+	if ((cast_type == RTN_BROADCAST) &&
 	    (card->info.broadcast_capable == 0)){
 		card->stats.tx_dropped++;
 		card->stats.tx_errors++;
@@ -4463,7 +4465,7 @@ qeth_send_packet(struct qeth_card *card, struct sk_buff *skb)
 			card->stats.tx_errors++;
 			dev_kfree_skb_any(skb);
 			return NETDEV_TX_OK;
-		} 
+		}
 		elements_needed++;
 	} else {
 		if ((rc = qeth_prepare_skb(card, &skb, &hdr, ipv))) {
@@ -4498,16 +4500,16 @@ qeth_send_packet(struct qeth_card *card, struct sk_buff *skb)
 		card->stats.tx_packets++;
 		card->stats.tx_bytes += tx_bytes;
 #ifdef CONFIG_QETH_PERF_STATS
-		if (skb_shinfo(skb)->tso_size &&
+		if (tso_size &&
 		   !(large_send == QETH_LARGE_SEND_NO)) {
-			card->perf_stats.large_send_bytes += skb->len;
+			card->perf_stats.large_send_bytes += tx_bytes;
 			card->perf_stats.large_send_cnt++;
 		}
- 		if (skb_shinfo(skb)->nr_frags > 0){
+ 		if (nr_frags > 0){
 			card->perf_stats.sg_skbs_sent++;
 			/* nr_frags + skb->data */
 			card->perf_stats.sg_frags_sent +=
-				skb_shinfo(skb)->nr_frags + 1;
+				nr_frags + 1;
 		}
 #endif /* CONFIG_QETH_PERF_STATS */
 	}
@@ -5373,7 +5375,7 @@ qeth_layer2_send_setdelvlan_cb(struct qeth_card *card,
         cmd = (struct qeth_ipa_cmd *) data;
         if (cmd->hdr.return_code) {
 		PRINT_ERR("Error in processing VLAN %i on %s: 0x%x. "
-			  "Continuing\n",cmd->data.setdelvlan.vlan_id, 
+			  "Continuing\n",cmd->data.setdelvlan.vlan_id,
 			  QETH_CARD_IFNAME(card), cmd->hdr.return_code);
 		QETH_DBF_TEXT_(trace, 2, "L2VL%4x", cmd->hdr.command);
 		QETH_DBF_TEXT_(trace, 2, "L2%s", CARD_BUS_ID(card));
@@ -5393,7 +5395,7 @@ qeth_layer2_send_setdelvlan(struct qeth_card *card, __u16 i,
 	iob = qeth_get_ipacmd_buffer(card, ipacmd, QETH_PROT_IPV4);
 	cmd = (struct qeth_ipa_cmd *)(iob->data+IPA_PDU_HEADER_SIZE);
         cmd->data.setdelvlan.vlan_id = i;
-	return qeth_send_ipa_cmd(card, iob, 
+	return qeth_send_ipa_cmd(card, iob,
 				 qeth_layer2_send_setdelvlan_cb, NULL);
 }
 
@@ -5457,7 +5459,7 @@ qeth_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid)
  * Examine hardware response to SET_PROMISC_MODE
  */
 static int
-qeth_setadp_promisc_mode_cb(struct qeth_card *card, 
+qeth_setadp_promisc_mode_cb(struct qeth_card *card,
 			    struct qeth_reply *reply,
 			    unsigned long data)
 {
@@ -5468,10 +5470,10 @@ qeth_setadp_promisc_mode_cb(struct qeth_card *card,
 
 	cmd = (struct qeth_ipa_cmd *) data;
 	setparms = &(cmd->data.setadapterparms);
-	
+
         qeth_default_setadapterparms_cb(card, reply, (unsigned long)cmd);
-	if (cmd->hdr.return_code) { 
-		QETH_DBF_TEXT_(trace,4,"prmrc%2.2x",cmd->hdr.return_code);	
+	if (cmd->hdr.return_code) {
+		QETH_DBF_TEXT_(trace,4,"prmrc%2.2x",cmd->hdr.return_code);
 		setparms->data.mode = SET_PROMISC_MODE_OFF;
 	}
 	card->info.promisc_mode = setparms->data.mode;
@@ -5517,7 +5519,7 @@ qeth_set_multicast_list(struct net_device *dev)
 
 	if (card->info.type == QETH_CARD_TYPE_OSN)
 		return ;
-	 
+
 	QETH_DBF_TEXT(trace, 3, "setmulti");
 	qeth_delete_mc_addresses(card);
 	if (card->options.layer2) {
@@ -5575,7 +5577,7 @@ qeth_osn_assist(struct net_device *dev,
 	struct qeth_cmd_buffer *iob;
 	struct qeth_card *card;
 	int rc;
-	
+
 	QETH_DBF_TEXT(trace, 2, "osnsdmc");
 	if (!dev)
 		return -ENODEV;
@@ -5654,7 +5656,7 @@ qeth_osn_deregister(struct net_device * dev)
 	card->osn_info.data_cb = NULL;
 	return;
 }
-					   
+
 static void
 qeth_delete_mc_addresses(struct qeth_card *card)
 {
@@ -5818,7 +5820,7 @@ qeth_add_multicast_ipv6(struct qeth_card *card)
 	struct inet6_dev *in6_dev;
 
 	QETH_DBF_TEXT(trace,4,"chkmcv6");
-	if (!qeth_is_supported(card, IPA_IPV6)) 
+	if (!qeth_is_supported(card, IPA_IPV6))
 		return ;
 	in6_dev = in6_dev_get(card->dev);
 	if (in6_dev == NULL)
@@ -6359,12 +6361,9 @@ qeth_netdev_init(struct net_device *dev)
 	dev->vlan_rx_kill_vid = qeth_vlan_rx_kill_vid;
 	dev->vlan_rx_add_vid = qeth_vlan_rx_add_vid;
 #endif
-	dev->hard_header = card->orig_hard_header;
 	if (qeth_get_netdev_flags(card) & IFF_NOARP) {
 		dev->rebuild_header = NULL;
 		dev->hard_header = NULL;
-		if (card->options.fake_ll)
-			dev->hard_header = qeth_fake_header;
 		dev->header_cache_update = NULL;
 		dev->hard_header_cache = NULL;
 	}
@@ -6373,6 +6372,9 @@ qeth_netdev_init(struct net_device *dev)
 	if (!(card->info.unique_id & UNIQUE_ID_NOT_BY_CARD))
 		card->dev->dev_id = card->info.unique_id & 0xffff;
 #endif
+	if (card->options.fake_ll &&
+		(qeth_get_netdev_flags(card) & IFF_NOARP))
+			dev->hard_header = qeth_fake_header;
 	dev->hard_header_parse = NULL;
 	dev->set_mac_address = qeth_layer2_set_mac_address;
 	dev->flags |= qeth_get_netdev_flags(card);
@@ -6477,6 +6479,9 @@ retry:
 	/*network device will be recovered*/
 	if (card->dev) {
 		card->dev->hard_header = card->orig_hard_header;
+		if (card->options.fake_ll &&
+		    (qeth_get_netdev_flags(card) & IFF_NOARP))
+			card->dev->hard_header = qeth_fake_header;
 		return 0;
 	}
 	/* at first set_online allocate netdev */
@@ -6584,7 +6589,7 @@ qeth_setadpparms_change_macaddr_cb(struct qeth_card *card,
 
 	cmd = (struct qeth_ipa_cmd *) data;
 	if (!card->options.layer2 || card->info.guestlan ||
-	    !(card->info.mac_bits & QETH_LAYER2_MAC_READ)) {	
+	    !(card->info.mac_bits & QETH_LAYER2_MAC_READ)) {
 		memcpy(card->dev->dev_addr,
 		       &cmd->data.setadapterparms.data.change_addr.addr,
 		       OSA_ADDR_LEN);
@@ -7031,14 +7036,12 @@ qeth_softsetup_ipv6(struct qeth_card *card)
 
 	QETH_DBF_TEXT(trace,3,"softipv6");
 
-	netif_stop_queue(card->dev);
 	rc = qeth_send_startlan(card, QETH_PROT_IPV6);
 	if (rc) {
 		PRINT_ERR("IPv6 startlan failed on %s\n",
 			  QETH_CARD_IFNAME(card));
 		return rc;
 	}
-	netif_wake_queue(card->dev);
 	rc = qeth_query_ipassists(card,QETH_PROT_IPV6);
 	if (rc) {
 		PRINT_ERR("IPv6 query ipassist failed on %s\n",
@@ -7352,7 +7355,8 @@ qeth_set_large_send(struct qeth_card *card, enum qeth_large_send_types type)
 		card->options.large_send = type;
 		return 0;
 	}
-	netif_stop_queue(card->dev);
+	if (card->state == CARD_STATE_UP)
+		netif_tx_disable(card->dev);
 	card->options.large_send = type;
 	switch (card->options.large_send) {
 	case QETH_LARGE_SEND_EDDP:
@@ -7374,7 +7378,8 @@ qeth_set_large_send(struct qeth_card *card, enum qeth_large_send_types type)
 		card->dev->features &= ~(NETIF_F_TSO | NETIF_F_SG);
 		break;
 	}
-	netif_wake_queue(card->dev);
+	if (card->state == CARD_STATE_UP)
+		netif_wake_queue(card->dev);
 	return rc;
 }
 
@@ -7427,7 +7432,7 @@ qeth_softsetup_card(struct qeth_card *card)
 	if ((rc = qeth_setrouting_v6(card)))
 		QETH_DBF_TEXT_(setup, 2, "5err%d", rc);
 out:
-	netif_stop_queue(card->dev);
+	netif_tx_disable(card->dev);
 	return 0;
 }
 
@@ -7567,7 +7572,7 @@ qeth_stop_card(struct qeth_card *card, int recovery_mode)
 	if (card->read.state == CH_STATE_UP &&
 	    card->write.state == CH_STATE_UP &&
 	    (card->state == CARD_STATE_UP)) {
-		if (recovery_mode && 
+		if (recovery_mode &&
 		    card->info.type != QETH_CARD_TYPE_OSN) {
 			qeth_stop(card->dev);
 		} else {
@@ -7736,10 +7741,8 @@ static int
 qeth_register_netdev(struct qeth_card *card)
 {
 	QETH_DBF_TEXT(setup, 3, "regnetd");
-	if (card->dev->reg_state != NETREG_UNINITIALIZED) {
-		qeth_netdev_init(card->dev);
+	if (card->dev->reg_state != NETREG_UNINITIALIZED)
 		return 0;
-	}
 	/* sysfs magic */
 	SET_NETDEV_DEV(card->dev, &card->gdev->dev);
 	return register_netdev(card->dev);
@@ -7750,7 +7753,7 @@ qeth_start_again(struct qeth_card *card, int recovery_mode)
 {
 	QETH_DBF_TEXT(setup ,2, "startag");
 
-	if (recovery_mode && 
+	if (recovery_mode &&
 	    card->info.type != QETH_CARD_TYPE_OSN) {
 		qeth_open(card->dev);
 	} else {
@@ -8014,7 +8017,6 @@ static int (*qeth_old_arp_constructor) (struct neighbour *);
 
 static struct neigh_ops arp_direct_ops_template = {
 	.family = AF_INET,
-	.destructor = NULL,
 	.solicit = NULL,
 	.error_report = NULL,
 	.output = dev_queue_xmit,
diff --git a/drivers/s390/net/qeth_mpc.h b/drivers/s390/net/qeth_mpc.h
index 011c41041029..0477c47471c5 100644
--- a/drivers/s390/net/qeth_mpc.h
+++ b/drivers/s390/net/qeth_mpc.h
@@ -445,7 +445,7 @@ enum qeth_ipa_arp_return_codes {
 /* Helper functions */
 #define IS_IPA_REPLY(cmd) ((cmd->hdr.initiator == IPA_CMD_INITIATOR_HOST) || \
 			   (cmd->hdr.initiator == IPA_CMD_INITIATOR_OSA_REPLY))
-	
+
 /*****************************************************************************/
 /* END OF   IP Assist related definitions                                    */
 /*****************************************************************************/
@@ -490,7 +490,7 @@ extern unsigned char ULP_ENABLE[];
 /* Layer 2 defintions */
 #define QETH_PROT_LAYER2 0x08
 #define QETH_PROT_TCPIP  0x03
-#define QETH_PROT_OSN2   0x0a     
+#define QETH_PROT_OSN2   0x0a
 #define QETH_ULP_ENABLE_PROT_TYPE(buffer) (buffer+0x50)
 #define QETH_IPA_CMD_PROT_TYPE(buffer) (buffer+0x19)
 
diff --git a/drivers/s390/net/qeth_proc.c b/drivers/s390/net/qeth_proc.c
index 360d782c7ada..66f2da14e6e3 100644
--- a/drivers/s390/net/qeth_proc.c
+++ b/drivers/s390/net/qeth_proc.c
@@ -36,7 +36,7 @@ qeth_procfile_seq_start(struct seq_file *s, loff_t *offset)
 {
 	struct device *dev = NULL;
 	loff_t nr = 0;
-	
+
 	down_read(&qeth_ccwgroup_driver.driver.bus->subsys.rwsem);
 	if (*offset == 0)
 		return SEQ_START_TOKEN;
@@ -60,8 +60,8 @@ static void *
 qeth_procfile_seq_next(struct seq_file *s, void *it, loff_t *offset)
 {
 	struct device *prev, *next;
-	
-	if (it == SEQ_START_TOKEN) 
+
+	if (it == SEQ_START_TOKEN)
 		prev = NULL;
 	else
 		prev = (struct device *) it;
@@ -180,7 +180,7 @@ qeth_perf_procfile_seq_show(struct seq_file *s, void *it)
 	struct device *device;
 	struct qeth_card *card;
 
-	
+
 	if (it == SEQ_START_TOKEN)
 		return 0;
 
diff --git a/drivers/s390/net/qeth_sys.c b/drivers/s390/net/qeth_sys.c
index 882d419e4160..185a9cfbcbdc 100644
--- a/drivers/s390/net/qeth_sys.c
+++ b/drivers/s390/net/qeth_sys.c
@@ -785,7 +785,7 @@ qeth_dev_large_send_store(struct device *dev, struct device_attribute *attr, con
 	}
 	if (card->options.large_send == type)
 		return count;
-	if ((rc = qeth_set_large_send(card, type)))	
+	if ((rc = qeth_set_large_send(card, type)))
 		return rc;
 	return count;
 }
@@ -1682,7 +1682,7 @@ qeth_create_device_attributes(struct device *dev)
 	if (card->info.type == QETH_CARD_TYPE_OSN)
 		return sysfs_create_group(&dev->kobj,
 					  &qeth_osn_device_attr_group);
-   	
+
 	if ((ret = sysfs_create_group(&dev->kobj, &qeth_device_attr_group)))
 		return ret;
 	if ((ret = sysfs_create_group(&dev->kobj, &qeth_device_ipato_group))){
@@ -1713,7 +1713,7 @@ qeth_remove_device_attributes(struct device *dev)
 	if (card->info.type == QETH_CARD_TYPE_OSN)
 		return sysfs_remove_group(&dev->kobj,
 					  &qeth_osn_device_attr_group);
-		      
+
 	sysfs_remove_group(&dev->kobj, &qeth_device_attr_group);
 	sysfs_remove_group(&dev->kobj, &qeth_device_ipato_group);
 	sysfs_remove_group(&dev->kobj, &qeth_device_vipa_group);
diff --git a/drivers/s390/net/qeth_tso.h b/drivers/s390/net/qeth_tso.h
index 1286ddea450b..24ef40ca9562 100644
--- a/drivers/s390/net/qeth_tso.h
+++ b/drivers/s390/net/qeth_tso.h
@@ -117,11 +117,11 @@ __qeth_fill_buffer_frag(struct sk_buff *skb, struct qdio_buffer *buffer,
 	int fragno;
 	unsigned long addr;
 	int element, cnt, dlen;
-	
+
 	fragno = skb_shinfo(skb)->nr_frags;
 	element = *next_element_to_fill;
 	dlen = 0;
-	
+
 	if (is_tso)
 		buffer->element[element].flags =
 			SBAL_FLAGS_MIDDLE_FRAG;
diff --git a/drivers/s390/s390mach.c b/drivers/s390/s390mach.c
index 3bf466603512..f99e55308b32 100644
--- a/drivers/s390/s390mach.c
+++ b/drivers/s390/s390mach.c
@@ -13,6 +13,7 @@
 #include <linux/sched.h>
 #include <linux/errno.h>
 #include <linux/workqueue.h>
+#include <linux/time.h>
 
 #include <asm/lowcore.h>
 
@@ -362,12 +363,19 @@ s390_revalidate_registers(struct mci *mci)
 	return kill_task;
 }
 
+#define MAX_IPD_COUNT	29
+#define MAX_IPD_TIME	(5 * 60 * USEC_PER_SEC) /* 5 minutes */
+
 /*
  * machine check handler.
  */
 void
 s390_do_machine_check(struct pt_regs *regs)
 {
+	static DEFINE_SPINLOCK(ipd_lock);
+	static unsigned long long last_ipd;
+	static int ipd_count;
+	unsigned long long tmp;
 	struct mci *mci;
 	struct mcck_struct *mcck;
 	int umode;
@@ -404,11 +412,27 @@ s390_do_machine_check(struct pt_regs *regs)
 				s390_handle_damage("processing backup machine "
 						   "check with damage.");
 			}
-			if (!umode)
-				s390_handle_damage("processing backup machine "
-						   "check in kernel mode.");
-			mcck->kill_task = 1;
-			mcck->mcck_code = *(unsigned long long *) mci;
+
+			/*
+			 * Nullifying exigent condition, therefore we might
+			 * retry this instruction.
+			 */
+
+			spin_lock(&ipd_lock);
+
+			tmp = get_clock();
+
+			if (((tmp - last_ipd) >> 12) < MAX_IPD_TIME)
+				ipd_count++;
+			else
+				ipd_count = 1;
+
+			last_ipd = tmp;
+
+			if (ipd_count == MAX_IPD_COUNT)
+				s390_handle_damage("too many ipd retries.");
+
+			spin_unlock(&ipd_lock);
 		}
 		else {
 			/* Processing damage -> stopping machine */
diff --git a/drivers/sbus/char/openprom.c b/drivers/sbus/char/openprom.c
index 383a95f34a0d..239e108b8ed1 100644
--- a/drivers/sbus/char/openprom.c
+++ b/drivers/sbus/char/openprom.c
@@ -392,13 +392,16 @@ static int openprom_bsd_ioctl(struct inode * inode, struct file * file,
 			return -ENOMEM;
 		}
 
-		prom_getproperty(op.op_nodeid, str, tmp, len);
-
-		tmp[len] = '\0';
+		cnt = prom_getproperty(op.op_nodeid, str, tmp, len);
+		if (cnt <= 0) {
+			error = -EINVAL;
+		} else {
+			tmp[len] = '\0';
 
-		if (__copy_to_user(argp, &op, sizeof(op)) != 0
-		    || copy_to_user(op.op_buf, tmp, len) != 0)
-			error = -EFAULT;
+			if (__copy_to_user(argp, &op, sizeof(op)) != 0 ||
+			    copy_to_user(op.op_buf, tmp, len) != 0)
+				error = -EFAULT;
+		}
 
 		kfree(tmp);
 		kfree(str);
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 13ad88a064b7..44728ae3fe77 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -446,7 +446,9 @@ config SCSI_DPT_I2O
 
 config SCSI_ADVANSYS
 	tristate "AdvanSys SCSI support"
-	depends on (ISA || EISA || PCI) && SCSI && BROKEN
+	depends on SCSI
+	depends on ISA || EISA || PCI
+	depends on BROKEN || X86_32
 	help
 	  This is a driver for all SCSI host adapters manufactured by
 	  AdvanSys. It is documented in the kernel source in
diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c
index 28b93057b607..2a419634b256 100644
--- a/drivers/scsi/advansys.c
+++ b/drivers/scsi/advansys.c
@@ -2051,7 +2051,7 @@ STATIC ASC_DCNT  AscGetMaxDmaCount(ushort);
 #define ADV_VADDR_TO_U32   virt_to_bus
 #define ADV_U32_TO_VADDR   bus_to_virt
 
-#define AdvPortAddr  ulong              /* Virtual memory address size */
+#define AdvPortAddr  void __iomem *     /* Virtual memory address size */
 
 /*
  * Define Adv Library required memory access macros.
diff --git a/drivers/scsi/aic7xxx/aic7xxx_osm_pci.c b/drivers/scsi/aic7xxx/aic7xxx_osm_pci.c
index cb30d9c1153d..0c9c2f400bf6 100644
--- a/drivers/scsi/aic7xxx/aic7xxx_osm_pci.c
+++ b/drivers/scsi/aic7xxx/aic7xxx_osm_pci.c
@@ -219,6 +219,7 @@ ahc_linux_pci_dev_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		ahc->flags |= AHC_39BIT_ADDRESSING;
 	} else {
 		if (dma_set_mask(dev, DMA_32BIT_MASK)) {
+			ahc_free(ahc);
 			printk(KERN_WARNING "aic7xxx: No suitable DMA available.\n");
                 	return (-ENODEV);
 		}
diff --git a/drivers/scsi/aic7xxx/aic7xxx_pci.c b/drivers/scsi/aic7xxx/aic7xxx_pci.c
index 02fed4a02eb3..63cab2d74552 100644
--- a/drivers/scsi/aic7xxx/aic7xxx_pci.c
+++ b/drivers/scsi/aic7xxx/aic7xxx_pci.c
@@ -2042,12 +2042,12 @@ ahc_pci_resume(struct ahc_softc *ahc)
 	 * that the OS doesn't know about and rely on our chip
 	 * reset handler to handle the rest.
 	 */
-	ahc_pci_write_config(ahc->dev_softc, DEVCONFIG, /*bytes*/4,
-			     ahc->bus_softc.pci_softc.devconfig);
-	ahc_pci_write_config(ahc->dev_softc, PCIR_COMMAND, /*bytes*/1,
-			     ahc->bus_softc.pci_softc.command);
-	ahc_pci_write_config(ahc->dev_softc, CSIZE_LATTIME, /*bytes*/1,
-			     ahc->bus_softc.pci_softc.csize_lattime);
+	ahc_pci_write_config(ahc->dev_softc, DEVCONFIG,
+			     ahc->bus_softc.pci_softc.devconfig, /*bytes*/4);
+	ahc_pci_write_config(ahc->dev_softc, PCIR_COMMAND,
+			     ahc->bus_softc.pci_softc.command, /*bytes*/1);
+	ahc_pci_write_config(ahc->dev_softc, CSIZE_LATTIME,
+			     ahc->bus_softc.pci_softc.csize_lattime, /*bytes*/1);
 	if ((ahc->flags & AHC_HAS_TERM_LOGIC) != 0) {
 		struct	seeprom_descriptor sd;
 		u_int	sxfrctl1;
diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.c b/drivers/scsi/ibmvscsi/ibmvscsi.c
index 12cb743d0ce5..944fc1203ebd 100644
--- a/drivers/scsi/ibmvscsi/ibmvscsi.c
+++ b/drivers/scsi/ibmvscsi/ibmvscsi.c
@@ -738,7 +738,8 @@ static void send_mad_adapter_info(struct ibmvscsi_host_data *hostdata)
 {
 	struct viosrp_adapter_info *req;
 	struct srp_event_struct *evt_struct;
-	
+	dma_addr_t addr;
+
 	evt_struct = get_event_struct(&hostdata->pool);
 	if (!evt_struct) {
 		printk(KERN_ERR "ibmvscsi: couldn't allocate an event "
@@ -756,10 +757,10 @@ static void send_mad_adapter_info(struct ibmvscsi_host_data *hostdata)
 	
 	req->common.type = VIOSRP_ADAPTER_INFO_TYPE;
 	req->common.length = sizeof(hostdata->madapter_info);
-	req->buffer = dma_map_single(hostdata->dev,
-				     &hostdata->madapter_info,
-				     sizeof(hostdata->madapter_info),
-				     DMA_BIDIRECTIONAL);
+	req->buffer = addr = dma_map_single(hostdata->dev,
+					    &hostdata->madapter_info,
+					    sizeof(hostdata->madapter_info),
+					    DMA_BIDIRECTIONAL);
 
 	if (dma_mapping_error(req->buffer)) {
 		printk(KERN_ERR
@@ -769,8 +770,13 @@ static void send_mad_adapter_info(struct ibmvscsi_host_data *hostdata)
 		return;
 	}
 	
-	if (ibmvscsi_send_srp_event(evt_struct, hostdata))
+	if (ibmvscsi_send_srp_event(evt_struct, hostdata)) {
 		printk(KERN_ERR "ibmvscsi: couldn't send ADAPTER_INFO_REQ!\n");
+		dma_unmap_single(hostdata->dev,
+				 addr,
+				 sizeof(hostdata->madapter_info),
+				 DMA_BIDIRECTIONAL);
+	}
 };
 
 /**
@@ -1258,6 +1264,7 @@ static int ibmvscsi_do_host_config(struct ibmvscsi_host_data *hostdata,
 {
 	struct viosrp_host_config *host_config;
 	struct srp_event_struct *evt_struct;
+	dma_addr_t addr;
 	int rc;
 
 	evt_struct = get_event_struct(&hostdata->pool);
@@ -1278,8 +1285,9 @@ static int ibmvscsi_do_host_config(struct ibmvscsi_host_data *hostdata,
 	memset(host_config, 0x00, sizeof(*host_config));
 	host_config->common.type = VIOSRP_HOST_CONFIG_TYPE;
 	host_config->common.length = length;
-	host_config->buffer = dma_map_single(hostdata->dev, buffer, length,
-					    DMA_BIDIRECTIONAL);
+	host_config->buffer = addr = dma_map_single(hostdata->dev, buffer,
+						    length,
+						    DMA_BIDIRECTIONAL);
 
 	if (dma_mapping_error(host_config->buffer)) {
 		printk(KERN_ERR
@@ -1290,11 +1298,9 @@ static int ibmvscsi_do_host_config(struct ibmvscsi_host_data *hostdata,
 
 	init_completion(&evt_struct->comp);
 	rc = ibmvscsi_send_srp_event(evt_struct, hostdata);
-	if (rc == 0) {
+	if (rc == 0)
 		wait_for_completion(&evt_struct->comp);
-		dma_unmap_single(hostdata->dev, host_config->buffer,
-				 length, DMA_BIDIRECTIONAL);
-	}
+	dma_unmap_single(hostdata->dev, addr, length, DMA_BIDIRECTIONAL);
 
 	return rc;
 }
diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index bd147207f25d..b046ffa22101 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -864,6 +864,9 @@ static unsigned int ata_id_xfermask(const u16 *id)
 /**
  *	ata_port_queue_task - Queue port_task
  *	@ap: The ata_port to queue port_task for
+ *	@fn: workqueue function to be scheduled
+ *	@data: data value to pass to workqueue function
+ *	@delay: delay time for workqueue function
  *
  *	Schedule @fn(@data) for execution after @delay jiffies using
  *	port_task.  There is one port_task per port and it's the
@@ -2739,6 +2742,8 @@ static unsigned int ata_dev_set_xfermode(struct ata_port *ap,
  *	ata_dev_init_params - Issue INIT DEV PARAMS command
  *	@ap: Port associated with device @dev
  *	@dev: Device to which command will be sent
+ *	@heads: Number of heads (taskfile parameter)
+ *	@sectors: Number of sectors (taskfile parameter)
  *
  *	LOCKING:
  *	Kernel thread context (may sleep)
@@ -3638,6 +3643,8 @@ static void ata_pio_block(struct ata_port *ap)
 
 		ata_pio_sector(qc);
 	}
+
+	ata_altstatus(ap); /* flush */
 }
 
 static void ata_pio_error(struct ata_port *ap)
@@ -3754,11 +3761,14 @@ static void atapi_packet_task(void *_data)
 		spin_lock_irqsave(&ap->host_set->lock, flags);
 		ap->flags &= ~ATA_FLAG_NOINTR;
 		ata_data_xfer(ap, qc->cdb, qc->dev->cdb_len, 1);
+		ata_altstatus(ap); /* flush */
+
 		if (qc->tf.protocol == ATA_PROT_ATAPI_DMA)
 			ap->ops->bmdma_start(qc);	/* initiate bmdma */
 		spin_unlock_irqrestore(&ap->host_set->lock, flags);
 	} else {
 		ata_data_xfer(ap, qc->cdb, qc->dev->cdb_len, 1);
+		ata_altstatus(ap); /* flush */
 
 		/* PIO commands are handled by polling */
 		ap->hsm_task_state = HSM_ST;
@@ -4287,6 +4297,7 @@ static int ata_start_drive(struct ata_port *ap, struct ata_device *dev)
 int ata_device_resume(struct ata_port *ap, struct ata_device *dev)
 {
 	if (ap->flags & ATA_FLAG_SUSPENDED) {
+		ata_busy_wait(ap, ATA_BUSY | ATA_DRQ, 200000);
 		ap->flags &= ~ATA_FLAG_SUSPENDED;
 		ata_set_mode(ap);
 	}
@@ -4302,6 +4313,7 @@ int ata_device_resume(struct ata_port *ap, struct ata_device *dev)
  *	ata_device_suspend - prepare a device for suspend
  *	@ap: port the device is connected to
  *	@dev: the device to suspend
+ *	@state: target power management state
  *
  *	Flush the cache on the drive, if appropriate, then issue a
  *	standbynow command.
diff --git a/drivers/scsi/lpfc/lpfc_crtn.h b/drivers/scsi/lpfc/lpfc_crtn.h
index fad607b2e6f4..ee22173fce43 100644
--- a/drivers/scsi/lpfc/lpfc_crtn.h
+++ b/drivers/scsi/lpfc/lpfc_crtn.h
@@ -27,7 +27,6 @@ void lpfc_config_link(struct lpfc_hba *, LPFC_MBOXQ_t *);
 int lpfc_read_sparam(struct lpfc_hba *, LPFC_MBOXQ_t *);
 void lpfc_read_config(struct lpfc_hba *, LPFC_MBOXQ_t *);
 void lpfc_read_lnk_stat(struct lpfc_hba *, LPFC_MBOXQ_t *);
-void lpfc_set_slim(struct lpfc_hba *, LPFC_MBOXQ_t *, uint32_t, uint32_t);
 int lpfc_reg_login(struct lpfc_hba *, uint32_t, uint8_t *, LPFC_MBOXQ_t *,
 		   uint32_t);
 void lpfc_unreg_login(struct lpfc_hba *, uint32_t, LPFC_MBOXQ_t *);
diff --git a/drivers/scsi/lpfc/lpfc_disc.h b/drivers/scsi/lpfc/lpfc_disc.h
index 8932b1be2b60..41cf5d3ea6ce 100644
--- a/drivers/scsi/lpfc/lpfc_disc.h
+++ b/drivers/scsi/lpfc/lpfc_disc.h
@@ -113,6 +113,7 @@ struct lpfc_nodelist {
 #define NLP_NPR_ADISC      0x2000000	/* Issue ADISC when dq'ed from
 					   NPR list */
 #define NLP_DELAY_REMOVE   0x4000000	/* Defer removal till end of DSM */
+#define NLP_NODEV_REMOVE   0x8000000	/* Defer removal till discovery ends */
 
 /* Defines for list searchs */
 #define NLP_SEARCH_MAPPED    0x1	/* search mapped */
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index 4813beaaca8f..283b7d824c34 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -302,10 +302,6 @@ lpfc_cmpl_els_flogi_fabric(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp,
 	if (lpfc_reg_login(phba, Fabric_DID, (uint8_t *) sp, mbox, 0))
 		goto fail_free_mbox;
 
-	/*
-	 * set_slim mailbox command needs to execute first,
-	 * queue this command to be processed later.
-	 */
 	mbox->mbox_cmpl = lpfc_mbx_cmpl_fabric_reg_login;
 	mbox->context2 = ndlp;
 
@@ -781,25 +777,26 @@ lpfc_cmpl_els_plogi(struct lpfc_hba * phba, struct lpfc_iocbq * cmdiocb,
 	if (disc && phba->num_disc_nodes) {
 		/* Check to see if there are more PLOGIs to be sent */
 		lpfc_more_plogi(phba);
-	}
 
-	if (phba->num_disc_nodes == 0) {
-		spin_lock_irq(phba->host->host_lock);
-		phba->fc_flag &= ~FC_NDISC_ACTIVE;
-		spin_unlock_irq(phba->host->host_lock);
+		if (phba->num_disc_nodes == 0) {
+			spin_lock_irq(phba->host->host_lock);
+			phba->fc_flag &= ~FC_NDISC_ACTIVE;
+			spin_unlock_irq(phba->host->host_lock);
 
-		lpfc_can_disctmo(phba);
-		if (phba->fc_flag & FC_RSCN_MODE) {
-			/* Check to see if more RSCNs came in while we were
-			 * processing this one.
-			 */
-			if ((phba->fc_rscn_id_cnt == 0) &&
-			    (!(phba->fc_flag & FC_RSCN_DISCOVERY))) {
-				spin_lock_irq(phba->host->host_lock);
-				phba->fc_flag &= ~FC_RSCN_MODE;
-				spin_unlock_irq(phba->host->host_lock);
-			} else {
-				lpfc_els_handle_rscn(phba);
+			lpfc_can_disctmo(phba);
+			if (phba->fc_flag & FC_RSCN_MODE) {
+				/*
+				 * Check to see if more RSCNs came in while
+				 * we were processing this one.
+				 */
+				if ((phba->fc_rscn_id_cnt == 0) &&
+			    	(!(phba->fc_flag & FC_RSCN_DISCOVERY))) {
+					spin_lock_irq(phba->host->host_lock);
+					phba->fc_flag &= ~FC_RSCN_MODE;
+					spin_unlock_irq(phba->host->host_lock);
+				} else {
+					lpfc_els_handle_rscn(phba);
+				}
 			}
 		}
 	}
@@ -1263,7 +1260,7 @@ lpfc_issue_els_logo(struct lpfc_hba * phba, struct lpfc_nodelist * ndlp,
 	psli = &phba->sli;
 	pring = &psli->ring[LPFC_ELS_RING];
 
-	cmdsize = 2 * (sizeof (uint32_t) + sizeof (struct lpfc_name));
+	cmdsize = (2 * sizeof (uint32_t)) + sizeof (struct lpfc_name);
 	elsiocb = lpfc_prep_els_iocb(phba, 1, cmdsize, retry, ndlp,
 						ndlp->nlp_DID, ELS_CMD_LOGO);
 	if (!elsiocb)
@@ -1451,22 +1448,23 @@ lpfc_cancel_retry_delay_tmo(struct lpfc_hba *phba, struct lpfc_nodelist * nlp)
 			 * PLOGIs to be sent
 			 */
 			lpfc_more_plogi(phba);
-		}
 
-		if (phba->num_disc_nodes == 0) {
-			phba->fc_flag &= ~FC_NDISC_ACTIVE;
-			lpfc_can_disctmo(phba);
-			if (phba->fc_flag & FC_RSCN_MODE) {
-				/* Check to see if more RSCNs
-				 * came in while we were
-				 * processing this one.
-				 */
-				if((phba->fc_rscn_id_cnt==0) &&
-				   (!(phba->fc_flag & FC_RSCN_DISCOVERY))) {
-					phba->fc_flag &= ~FC_RSCN_MODE;
-				}
-				else {
-					lpfc_els_handle_rscn(phba);
+			if (phba->num_disc_nodes == 0) {
+				phba->fc_flag &= ~FC_NDISC_ACTIVE;
+				lpfc_can_disctmo(phba);
+				if (phba->fc_flag & FC_RSCN_MODE) {
+					/*
+					 * Check to see if more RSCNs
+					 * came in while we were
+					 * processing this one.
+					 */
+					if((phba->fc_rscn_id_cnt==0) &&
+					 !(phba->fc_flag & FC_RSCN_DISCOVERY)) {
+						phba->fc_flag &= ~FC_RSCN_MODE;
+					}
+					else {
+						lpfc_els_handle_rscn(phba);
+					}
 				}
 			}
 		}
@@ -1872,9 +1870,6 @@ lpfc_cmpl_els_acc(struct lpfc_hba * phba, struct lpfc_iocbq * cmdiocb,
 	if (mbox) {
 		if ((rspiocb->iocb.ulpStatus == 0)
 		    && (ndlp->nlp_flag & NLP_ACC_REGLOGIN)) {
-			/* set_slim mailbox command needs to execute first,
-			 * queue this command to be processed later.
-			 */
 			lpfc_unreg_rpi(phba, ndlp);
 			mbox->mbox_cmpl = lpfc_mbx_cmpl_reg_login;
 			mbox->context2 = ndlp;
@@ -1920,6 +1915,7 @@ lpfc_els_rsp_acc(struct lpfc_hba * phba, uint32_t flag,
 	uint8_t *pcmd;
 	uint16_t cmdsize;
 	int rc;
+	ELS_PKT *els_pkt_ptr;
 
 	psli = &phba->sli;
 	pring = &psli->ring[LPFC_ELS_RING];	/* ELS ring */
@@ -1958,6 +1954,23 @@ lpfc_els_rsp_acc(struct lpfc_hba * phba, uint32_t flag,
 		pcmd += sizeof (uint32_t);
 		memcpy(pcmd, &phba->fc_sparam, sizeof (struct serv_parm));
 		break;
+	case ELS_CMD_PRLO:
+		cmdsize = sizeof (uint32_t) + sizeof (PRLO);
+		elsiocb = lpfc_prep_els_iocb(phba, 0, cmdsize, oldiocb->retry,
+					     ndlp, ndlp->nlp_DID, ELS_CMD_PRLO);
+		if (!elsiocb)
+			return 1;
+
+		icmd = &elsiocb->iocb;
+		icmd->ulpContext = oldcmd->ulpContext; /* Xri */
+		pcmd = (((struct lpfc_dmabuf *) elsiocb->context2)->virt);
+
+		memcpy(pcmd, ((struct lpfc_dmabuf *) oldiocb->context2)->virt,
+		       sizeof (uint32_t) + sizeof (PRLO));
+		*((uint32_t *) (pcmd)) = ELS_CMD_PRLO_ACC;
+		els_pkt_ptr = (ELS_PKT *) pcmd;
+		els_pkt_ptr->un.prlo.acceptRspCode = PRLO_REQ_EXECUTED;
+		break;
 	default:
 		return 1;
 	}
@@ -2498,7 +2511,7 @@ lpfc_els_rcv_rscn(struct lpfc_hba * phba,
 	/* If we are about to begin discovery, just ACC the RSCN.
 	 * Discovery processing will satisfy it.
 	 */
-	if (phba->hba_state < LPFC_NS_QRY) {
+	if (phba->hba_state <= LPFC_NS_QRY) {
 		lpfc_els_rsp_acc(phba, ELS_CMD_ACC, cmdiocb, ndlp, NULL,
 								newnode);
 		return 0;
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index 6721e679df62..adb086009ae0 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -311,8 +311,8 @@ lpfc_workq_post_event(struct lpfc_hba * phba, void *arg1, void *arg2,
 	evtp->evt_arg2  = arg2;
 	evtp->evt       = evt;
 
-	list_add_tail(&evtp->evt_listp, &phba->work_list);
 	spin_lock_irq(phba->host->host_lock);
+	list_add_tail(&evtp->evt_listp, &phba->work_list);
 	if (phba->work_wait)
 		wake_up(phba->work_wait);
 	spin_unlock_irq(phba->host->host_lock);
@@ -1071,10 +1071,6 @@ lpfc_register_remote_port(struct lpfc_hba * phba,
 	/* initialize static port data */
 	rport->maxframe_size = ndlp->nlp_maxframe;
 	rport->supported_classes = ndlp->nlp_class_sup;
-	if ((rport->scsi_target_id != -1) &&
-		(rport->scsi_target_id < MAX_FCP_TARGET)) {
-		ndlp->nlp_sid = rport->scsi_target_id;
-	}
 	rdata = rport->dd_data;
 	rdata->pnode = ndlp;
 
@@ -1087,6 +1083,10 @@ lpfc_register_remote_port(struct lpfc_hba * phba,
 	if (rport_ids.roles !=  FC_RPORT_ROLE_UNKNOWN)
 		fc_remote_port_rolechg(rport, rport_ids.roles);
 
+	if ((rport->scsi_target_id != -1) &&
+		(rport->scsi_target_id < MAX_FCP_TARGET)) {
+		ndlp->nlp_sid = rport->scsi_target_id;
+	}
 
 	return;
 }
@@ -1238,6 +1238,7 @@ lpfc_nlp_list(struct lpfc_hba * phba, struct lpfc_nodelist * nlp, int list)
 						evt_listp);
 
 		}
+		nlp->nlp_flag &= ~NLP_NODEV_REMOVE;
 		nlp->nlp_type |= NLP_FC_NODE;
 		break;
 	case NLP_MAPPED_LIST:
@@ -1258,6 +1259,7 @@ lpfc_nlp_list(struct lpfc_hba * phba, struct lpfc_nodelist * nlp, int list)
 						evt_listp);
 
 		}
+		nlp->nlp_flag &= ~NLP_NODEV_REMOVE;
 		break;
 	case NLP_NPR_LIST:
 		nlp->nlp_flag |= list;
@@ -1402,6 +1404,8 @@ lpfc_check_sli_ndlp(struct lpfc_hba * phba,
 			if (icmd->ulpContext == (volatile ushort)ndlp->nlp_rpi)
 				return 1;
 		case CMD_ELS_REQUEST64_CR:
+			if (icmd->un.elsreq64.remoteID == ndlp->nlp_DID)
+				return 1;
 		case CMD_XMIT_ELS_RSP64_CX:
 			if (iocb->context1 == (uint8_t *) ndlp)
 				return 1;
@@ -1901,10 +1905,8 @@ lpfc_setup_disc_node(struct lpfc_hba * phba, uint32_t did)
 			 */
 			if (ndlp->nlp_flag & NLP_DELAY_TMO)
 				lpfc_cancel_retry_delay_tmo(phba, ndlp);
-		} else {
-			ndlp->nlp_flag &= ~NLP_NPR_2B_DISC;
+		} else
 			ndlp = NULL;
-		}
 	} else {
 		flg = ndlp->nlp_flag & NLP_LIST_MASK;
 		if ((flg == NLP_ADISC_LIST) || (flg == NLP_PLOGI_LIST))
diff --git a/drivers/scsi/lpfc/lpfc_hw.h b/drivers/scsi/lpfc/lpfc_hw.h
index 54d04188f7cc..eedf98801366 100644
--- a/drivers/scsi/lpfc/lpfc_hw.h
+++ b/drivers/scsi/lpfc/lpfc_hw.h
@@ -449,6 +449,7 @@ struct serv_parm {	/* Structure is in Big Endian format */
 #define ELS_CMD_RRQ       0x12000000
 #define ELS_CMD_PRLI      0x20100014
 #define ELS_CMD_PRLO      0x21100014
+#define ELS_CMD_PRLO_ACC  0x02100014
 #define ELS_CMD_PDISC     0x50000000
 #define ELS_CMD_FDISC     0x51000000
 #define ELS_CMD_ADISC     0x52000000
@@ -484,6 +485,7 @@ struct serv_parm {	/* Structure is in Big Endian format */
 #define ELS_CMD_RRQ       0x12
 #define ELS_CMD_PRLI      0x14001020
 #define ELS_CMD_PRLO      0x14001021
+#define ELS_CMD_PRLO_ACC  0x14001002
 #define ELS_CMD_PDISC     0x50
 #define ELS_CMD_FDISC     0x51
 #define ELS_CMD_ADISC     0x52
@@ -1539,6 +1541,7 @@ typedef struct {
 
 #define FLAGS_TOPOLOGY_FAILOVER      0x0400	/* Bit 10 */
 #define FLAGS_LINK_SPEED             0x0800	/* Bit 11 */
+#define FLAGS_IMED_ABORT             0x04000	/* Bit 14 */
 
 	uint32_t link_speed;
 #define LINK_SPEED_AUTO 0       /* Auto selection */
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 66d5d003555d..908d0f27706f 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -294,15 +294,6 @@ lpfc_config_port_post(struct lpfc_hba * phba)
 		}
 	}
 
-	/* This should turn on DELAYED ABTS for ELS timeouts */
-	lpfc_set_slim(phba, pmb, 0x052198, 0x1);
-	if (lpfc_sli_issue_mbox(phba, pmb, MBX_POLL) != MBX_SUCCESS) {
-		phba->hba_state = LPFC_HBA_ERROR;
-		mempool_free( pmb, phba->mbox_mem_pool);
-		return -EIO;
-	}
-
-
 	lpfc_read_config(phba, pmb);
 	if (lpfc_sli_issue_mbox(phba, pmb, MBX_POLL) != MBX_SUCCESS) {
 		lpfc_printf_log(phba,
@@ -804,7 +795,7 @@ lpfc_get_hba_model_desc(struct lpfc_hba * phba, uint8_t * mdp, uint8_t * descp)
 		int    max_speed;
 		char * ports;
 		char * bus;
-	} m;
+	} m = {"<Unknown>", 0, "", ""};
 
 	pci_read_config_byte(phba->pcidev, PCI_HEADER_TYPE, &hdrtype);
 	ports = (hdrtype == 0x80) ? "2-port " : "";
@@ -1627,7 +1618,7 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid)
 
 	error = lpfc_alloc_sysfs_attr(phba);
 	if (error)
-		goto out_kthread_stop;
+		goto out_remove_host;
 
 	error =	request_irq(phba->pcidev->irq, lpfc_intr_handler, SA_SHIRQ,
 							LPFC_DRIVER_NAME, phba);
@@ -1644,8 +1635,10 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid)
 	phba->HCregaddr = phba->ctrl_regs_memmap_p + HC_REG_OFFSET;
 
 	error = lpfc_sli_hba_setup(phba);
-	if (error)
+	if (error) {
+		error = -ENODEV;
 		goto out_free_irq;
+	}
 
 	if (phba->cfg_poll & DISABLE_FCP_RING_INT) {
 		spin_lock_irq(phba->host->host_lock);
@@ -1700,6 +1693,9 @@ out_free_irq:
 	free_irq(phba->pcidev->irq, phba);
 out_free_sysfs_attr:
 	lpfc_free_sysfs_attr(phba);
+out_remove_host:
+	fc_remove_host(phba->host);
+	scsi_remove_host(phba->host);
 out_kthread_stop:
 	kthread_stop(phba->worker_thread);
 out_free_iocbq:
@@ -1721,12 +1717,14 @@ out_iounmap_slim:
 out_idr_remove:
 	idr_remove(&lpfc_hba_index, phba->brd_no);
 out_put_host:
+	phba->host = NULL;
 	scsi_host_put(host);
 out_release_regions:
 	pci_release_regions(pdev);
 out_disable_device:
 	pci_disable_device(pdev);
 out:
+	pci_set_drvdata(pdev, NULL);
 	return error;
 }
 
diff --git a/drivers/scsi/lpfc/lpfc_mbox.c b/drivers/scsi/lpfc/lpfc_mbox.c
index c585e2b2e589..e42f22aaf71b 100644
--- a/drivers/scsi/lpfc/lpfc_mbox.c
+++ b/drivers/scsi/lpfc/lpfc_mbox.c
@@ -200,6 +200,9 @@ lpfc_init_link(struct lpfc_hba * phba,
 		break;
 	}
 
+	/* Enable asynchronous ABTS responses from firmware */
+	mb->un.varInitLnk.link_flags |= FLAGS_IMED_ABORT;
+
 	/* NEW_FEATURE
 	 * Setting up the link speed
 	 */
@@ -292,36 +295,6 @@ lpfc_unreg_did(struct lpfc_hba * phba, uint32_t did, LPFC_MBOXQ_t * pmb)
 	return;
 }
 
-/***********************************************/
-
-/*                  command to write slim      */
-/***********************************************/
-void
-lpfc_set_slim(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb, uint32_t addr,
-	      uint32_t value)
-{
-	MAILBOX_t *mb;
-
-	mb = &pmb->mb;
-	memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
-
-	/* addr = 0x090597 is AUTO ABTS disable for ELS commands */
-	/* addr = 0x052198 is DELAYED ABTS enable for ELS commands */
-
-	/*
-	 * Always turn on DELAYED ABTS for ELS timeouts
-	 */
-	if ((addr == 0x052198) && (value == 0))
-		value = 1;
-
-	mb->un.varWords[0] = addr;
-	mb->un.varWords[1] = value;
-
-	mb->mbxCommand = MBX_SET_SLIM;
-	mb->mbxOwner = OWN_HOST;
-	return;
-}
-
 /**********************************************/
 /*  lpfc_read_nv  Issue a READ CONFIG         */
 /*                mailbox command             */
diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c
index 3d77bd999b70..27d60ad897cd 100644
--- a/drivers/scsi/lpfc/lpfc_nportdisc.c
+++ b/drivers/scsi/lpfc/lpfc_nportdisc.c
@@ -465,14 +465,18 @@ lpfc_rcv_padisc(struct lpfc_hba * phba,
 static int
 lpfc_rcv_logo(struct lpfc_hba * phba,
 		      struct lpfc_nodelist * ndlp,
-		      struct lpfc_iocbq *cmdiocb)
+		      struct lpfc_iocbq *cmdiocb,
+		      uint32_t els_cmd)
 {
 	/* Put ndlp on NPR list with 1 sec timeout for plogi, ACC logo */
 	/* Only call LOGO ACC for first LOGO, this avoids sending unnecessary
 	 * PLOGIs during LOGO storms from a device.
 	 */
 	ndlp->nlp_flag |= NLP_LOGO_ACC;
-	lpfc_els_rsp_acc(phba, ELS_CMD_ACC, cmdiocb, ndlp, NULL, 0);
+	if (els_cmd == ELS_CMD_PRLO)
+		lpfc_els_rsp_acc(phba, ELS_CMD_PRLO, cmdiocb, ndlp, NULL, 0);
+	else
+		lpfc_els_rsp_acc(phba, ELS_CMD_ACC, cmdiocb, ndlp, NULL, 0);
 
 	if (!(ndlp->nlp_type & NLP_FABRIC) ||
 		(ndlp->nlp_state == NLP_STE_ADISC_ISSUE)) {
@@ -681,7 +685,7 @@ lpfc_rcv_logo_plogi_issue(struct lpfc_hba * phba,
 	/* software abort outstanding PLOGI */
 	lpfc_els_abort(phba, ndlp, 1);
 
-	lpfc_rcv_logo(phba, ndlp, cmdiocb);
+	lpfc_rcv_logo(phba, ndlp, cmdiocb, ELS_CMD_LOGO);
 	return ndlp->nlp_state;
 }
 
@@ -788,10 +792,6 @@ lpfc_cmpl_plogi_plogi_issue(struct lpfc_hba * phba,
 	if (lpfc_reg_login
 	    (phba, irsp->un.elsreq64.remoteID,
 	     (uint8_t *) sp, mbox, 0) == 0) {
-		/* set_slim mailbox command needs to
-		 * execute first, queue this command to
-		 * be processed later.
-		 */
 		switch (ndlp->nlp_DID) {
 		case NameServer_DID:
 			mbox->mbox_cmpl =
@@ -832,11 +832,17 @@ static uint32_t
 lpfc_device_rm_plogi_issue(struct lpfc_hba * phba,
 			   struct lpfc_nodelist * ndlp, void *arg, uint32_t evt)
 {
-	/* software abort outstanding PLOGI */
-	lpfc_els_abort(phba, ndlp, 1);
+	if(ndlp->nlp_flag & NLP_NPR_2B_DISC) {
+		ndlp->nlp_flag |= NLP_NODEV_REMOVE;
+		return ndlp->nlp_state;
+	}
+	else {
+		/* software abort outstanding PLOGI */
+		lpfc_els_abort(phba, ndlp, 1);
 
-	lpfc_nlp_list(phba, ndlp, NLP_NO_LIST);
-	return NLP_STE_FREED_NODE;
+		lpfc_nlp_list(phba, ndlp, NLP_NO_LIST);
+		return NLP_STE_FREED_NODE;
+	}
 }
 
 static uint32_t
@@ -851,7 +857,7 @@ lpfc_device_recov_plogi_issue(struct lpfc_hba * phba,
 	ndlp->nlp_state = NLP_STE_NPR_NODE;
 	lpfc_nlp_list(phba, ndlp, NLP_NPR_LIST);
 	spin_lock_irq(phba->host->host_lock);
-	ndlp->nlp_flag &= ~NLP_NPR_2B_DISC;
+	ndlp->nlp_flag &= ~(NLP_NODEV_REMOVE | NLP_NPR_2B_DISC);
 	spin_unlock_irq(phba->host->host_lock);
 
 	return ndlp->nlp_state;
@@ -905,7 +911,7 @@ lpfc_rcv_logo_adisc_issue(struct lpfc_hba * phba,
 	/* software abort outstanding ADISC */
 	lpfc_els_abort(phba, ndlp, 0);
 
-	lpfc_rcv_logo(phba, ndlp, cmdiocb);
+	lpfc_rcv_logo(phba, ndlp, cmdiocb, ELS_CMD_LOGO);
 	return ndlp->nlp_state;
 }
 
@@ -932,7 +938,7 @@ lpfc_rcv_prlo_adisc_issue(struct lpfc_hba * phba,
 	cmdiocb = (struct lpfc_iocbq *) arg;
 
 	/* Treat like rcv logo */
-	lpfc_rcv_logo(phba, ndlp, cmdiocb);
+	lpfc_rcv_logo(phba, ndlp, cmdiocb, ELS_CMD_PRLO);
 	return ndlp->nlp_state;
 }
 
@@ -987,11 +993,17 @@ lpfc_device_rm_adisc_issue(struct lpfc_hba * phba,
 			    struct lpfc_nodelist * ndlp, void *arg,
 			    uint32_t evt)
 {
-	/* software abort outstanding ADISC */
-	lpfc_els_abort(phba, ndlp, 1);
+	if(ndlp->nlp_flag & NLP_NPR_2B_DISC) {
+		ndlp->nlp_flag |= NLP_NODEV_REMOVE;
+		return ndlp->nlp_state;
+	}
+	else {
+		/* software abort outstanding ADISC */
+		lpfc_els_abort(phba, ndlp, 1);
 
-	lpfc_nlp_list(phba, ndlp, NLP_NO_LIST);
-	return NLP_STE_FREED_NODE;
+		lpfc_nlp_list(phba, ndlp, NLP_NO_LIST);
+		return NLP_STE_FREED_NODE;
+	}
 }
 
 static uint32_t
@@ -1006,7 +1018,7 @@ lpfc_device_recov_adisc_issue(struct lpfc_hba * phba,
 	ndlp->nlp_state = NLP_STE_NPR_NODE;
 	lpfc_nlp_list(phba, ndlp, NLP_NPR_LIST);
 	spin_lock_irq(phba->host->host_lock);
-	ndlp->nlp_flag &= ~NLP_NPR_2B_DISC;
+	ndlp->nlp_flag &= ~(NLP_NODEV_REMOVE | NLP_NPR_2B_DISC);
 	ndlp->nlp_flag |= NLP_NPR_ADISC;
 	spin_unlock_irq(phba->host->host_lock);
 
@@ -1048,7 +1060,7 @@ lpfc_rcv_logo_reglogin_issue(struct lpfc_hba * phba,
 
 	cmdiocb = (struct lpfc_iocbq *) arg;
 
-	lpfc_rcv_logo(phba, ndlp, cmdiocb);
+	lpfc_rcv_logo(phba, ndlp, cmdiocb, ELS_CMD_LOGO);
 	return ndlp->nlp_state;
 }
 
@@ -1073,7 +1085,7 @@ lpfc_rcv_prlo_reglogin_issue(struct lpfc_hba * phba,
 	struct lpfc_iocbq *cmdiocb;
 
 	cmdiocb = (struct lpfc_iocbq *) arg;
-	lpfc_els_rsp_acc(phba, ELS_CMD_ACC, cmdiocb, ndlp, NULL, 0);
+	lpfc_els_rsp_acc(phba, ELS_CMD_PRLO, cmdiocb, ndlp, NULL, 0);
 	return ndlp->nlp_state;
 }
 
@@ -1133,8 +1145,14 @@ lpfc_device_rm_reglogin_issue(struct lpfc_hba * phba,
 			      struct lpfc_nodelist * ndlp, void *arg,
 			      uint32_t evt)
 {
-	lpfc_nlp_list(phba, ndlp, NLP_NO_LIST);
-	return NLP_STE_FREED_NODE;
+	if(ndlp->nlp_flag & NLP_NPR_2B_DISC) {
+		ndlp->nlp_flag |= NLP_NODEV_REMOVE;
+		return ndlp->nlp_state;
+	}
+	else {
+		lpfc_nlp_list(phba, ndlp, NLP_NO_LIST);
+		return NLP_STE_FREED_NODE;
+	}
 }
 
 static uint32_t
@@ -1146,7 +1164,7 @@ lpfc_device_recov_reglogin_issue(struct lpfc_hba * phba,
 	ndlp->nlp_state = NLP_STE_NPR_NODE;
 	lpfc_nlp_list(phba, ndlp, NLP_NPR_LIST);
 	spin_lock_irq(phba->host->host_lock);
-	ndlp->nlp_flag &= ~NLP_NPR_2B_DISC;
+	ndlp->nlp_flag &= ~(NLP_NODEV_REMOVE | NLP_NPR_2B_DISC);
 	spin_unlock_irq(phba->host->host_lock);
 	return ndlp->nlp_state;
 }
@@ -1186,7 +1204,7 @@ lpfc_rcv_logo_prli_issue(struct lpfc_hba * phba,
 	/* Software abort outstanding PRLI before sending acc */
 	lpfc_els_abort(phba, ndlp, 1);
 
-	lpfc_rcv_logo(phba, ndlp, cmdiocb);
+	lpfc_rcv_logo(phba, ndlp, cmdiocb, ELS_CMD_LOGO);
 	return ndlp->nlp_state;
 }
 
@@ -1214,7 +1232,7 @@ lpfc_rcv_prlo_prli_issue(struct lpfc_hba * phba,
 	struct lpfc_iocbq *cmdiocb;
 
 	cmdiocb = (struct lpfc_iocbq *) arg;
-	lpfc_els_rsp_acc(phba, ELS_CMD_ACC, cmdiocb, ndlp, NULL, 0);
+	lpfc_els_rsp_acc(phba, ELS_CMD_PRLO, cmdiocb, ndlp, NULL, 0);
 	return ndlp->nlp_state;
 }
 
@@ -1278,11 +1296,17 @@ static uint32_t
 lpfc_device_rm_prli_issue(struct lpfc_hba * phba,
 			  struct lpfc_nodelist * ndlp, void *arg, uint32_t evt)
 {
-	/* software abort outstanding PRLI */
-	lpfc_els_abort(phba, ndlp, 1);
+	if(ndlp->nlp_flag & NLP_NPR_2B_DISC) {
+		ndlp->nlp_flag |= NLP_NODEV_REMOVE;
+		return ndlp->nlp_state;
+	}
+	else {
+		/* software abort outstanding PLOGI */
+		lpfc_els_abort(phba, ndlp, 1);
 
-	lpfc_nlp_list(phba, ndlp, NLP_NO_LIST);
-	return NLP_STE_FREED_NODE;
+		lpfc_nlp_list(phba, ndlp, NLP_NO_LIST);
+		return NLP_STE_FREED_NODE;
+	}
 }
 
 
@@ -1313,7 +1337,7 @@ lpfc_device_recov_prli_issue(struct lpfc_hba * phba,
 	ndlp->nlp_state = NLP_STE_NPR_NODE;
 	lpfc_nlp_list(phba, ndlp, NLP_NPR_LIST);
 	spin_lock_irq(phba->host->host_lock);
-	ndlp->nlp_flag &= ~NLP_NPR_2B_DISC;
+	ndlp->nlp_flag &= ~(NLP_NODEV_REMOVE | NLP_NPR_2B_DISC);
 	spin_unlock_irq(phba->host->host_lock);
 	return ndlp->nlp_state;
 }
@@ -1351,7 +1375,7 @@ lpfc_rcv_logo_unmap_node(struct lpfc_hba * phba,
 
 	cmdiocb = (struct lpfc_iocbq *) arg;
 
-	lpfc_rcv_logo(phba, ndlp, cmdiocb);
+	lpfc_rcv_logo(phba, ndlp, cmdiocb, ELS_CMD_LOGO);
 	return ndlp->nlp_state;
 }
 
@@ -1375,7 +1399,7 @@ lpfc_rcv_prlo_unmap_node(struct lpfc_hba * phba,
 
 	cmdiocb = (struct lpfc_iocbq *) arg;
 
-	lpfc_els_rsp_acc(phba, ELS_CMD_ACC, cmdiocb, ndlp, NULL, 0);
+	lpfc_els_rsp_acc(phba, ELS_CMD_PRLO, cmdiocb, ndlp, NULL, 0);
 	return ndlp->nlp_state;
 }
 
@@ -1386,7 +1410,7 @@ lpfc_device_recov_unmap_node(struct lpfc_hba * phba,
 	ndlp->nlp_prev_state = NLP_STE_UNMAPPED_NODE;
 	ndlp->nlp_state = NLP_STE_NPR_NODE;
 	lpfc_nlp_list(phba, ndlp, NLP_NPR_LIST);
-	ndlp->nlp_flag &= ~NLP_NPR_2B_DISC;
+	ndlp->nlp_flag &= ~(NLP_NODEV_REMOVE | NLP_NPR_2B_DISC);
 	lpfc_disc_set_adisc(phba, ndlp);
 
 	return ndlp->nlp_state;
@@ -1424,7 +1448,7 @@ lpfc_rcv_logo_mapped_node(struct lpfc_hba * phba,
 
 	cmdiocb = (struct lpfc_iocbq *) arg;
 
-	lpfc_rcv_logo(phba, ndlp, cmdiocb);
+	lpfc_rcv_logo(phba, ndlp, cmdiocb, ELS_CMD_LOGO);
 	return ndlp->nlp_state;
 }
 
@@ -1456,7 +1480,7 @@ lpfc_rcv_prlo_mapped_node(struct lpfc_hba * phba,
 	spin_unlock_irq(phba->host->host_lock);
 
 	/* Treat like rcv logo */
-	lpfc_rcv_logo(phba, ndlp, cmdiocb);
+	lpfc_rcv_logo(phba, ndlp, cmdiocb, ELS_CMD_PRLO);
 	return ndlp->nlp_state;
 }
 
@@ -1469,7 +1493,7 @@ lpfc_device_recov_mapped_node(struct lpfc_hba * phba,
 	ndlp->nlp_state = NLP_STE_NPR_NODE;
 	lpfc_nlp_list(phba, ndlp, NLP_NPR_LIST);
 	spin_lock_irq(phba->host->host_lock);
-	ndlp->nlp_flag &= ~NLP_NPR_2B_DISC;
+	ndlp->nlp_flag &= ~(NLP_NODEV_REMOVE | NLP_NPR_2B_DISC);
 	spin_unlock_irq(phba->host->host_lock);
 	lpfc_disc_set_adisc(phba, ndlp);
 	return ndlp->nlp_state;
@@ -1551,7 +1575,7 @@ lpfc_rcv_logo_npr_node(struct lpfc_hba * phba,
 
 	cmdiocb = (struct lpfc_iocbq *) arg;
 
-	lpfc_rcv_logo(phba, ndlp, cmdiocb);
+	lpfc_rcv_logo(phba, ndlp, cmdiocb, ELS_CMD_LOGO);
 	return ndlp->nlp_state;
 }
 
@@ -1617,9 +1641,16 @@ lpfc_cmpl_plogi_npr_node(struct lpfc_hba * phba,
 			  struct lpfc_nodelist * ndlp, void *arg, uint32_t evt)
 {
 	struct lpfc_iocbq *cmdiocb, *rspiocb;
+	IOCB_t *irsp;
 
 	cmdiocb = (struct lpfc_iocbq *) arg;
 	rspiocb = cmdiocb->context_un.rsp_iocb;
+
+	irsp = &rspiocb->iocb;
+	if (irsp->ulpStatus) {
+		lpfc_nlp_list(phba, ndlp, NLP_NO_LIST);
+		return NLP_STE_FREED_NODE;
+	}
 	return ndlp->nlp_state;
 }
 
@@ -1628,9 +1659,16 @@ lpfc_cmpl_prli_npr_node(struct lpfc_hba * phba,
 			  struct lpfc_nodelist * ndlp, void *arg, uint32_t evt)
 {
 	struct lpfc_iocbq *cmdiocb, *rspiocb;
+	IOCB_t *irsp;
 
 	cmdiocb = (struct lpfc_iocbq *) arg;
 	rspiocb = cmdiocb->context_un.rsp_iocb;
+
+	irsp = &rspiocb->iocb;
+	if (irsp->ulpStatus && (ndlp->nlp_flag & NLP_NODEV_REMOVE)) {
+		lpfc_nlp_list(phba, ndlp, NLP_NO_LIST);
+		return NLP_STE_FREED_NODE;
+	}
 	return ndlp->nlp_state;
 }
 
@@ -1649,9 +1687,16 @@ lpfc_cmpl_adisc_npr_node(struct lpfc_hba * phba,
 			    uint32_t evt)
 {
 	struct lpfc_iocbq *cmdiocb, *rspiocb;
+	IOCB_t *irsp;
 
 	cmdiocb = (struct lpfc_iocbq *) arg;
 	rspiocb = cmdiocb->context_un.rsp_iocb;
+
+	irsp = &rspiocb->iocb;
+	if (irsp->ulpStatus && (ndlp->nlp_flag & NLP_NODEV_REMOVE)) {
+		lpfc_nlp_list(phba, ndlp, NLP_NO_LIST);
+		return NLP_STE_FREED_NODE;
+	}
 	return ndlp->nlp_state;
 }
 
@@ -1668,7 +1713,12 @@ lpfc_cmpl_reglogin_npr_node(struct lpfc_hba * phba,
 
 	if (!mb->mbxStatus)
 		ndlp->nlp_rpi = mb->un.varWords[0];
-
+	else {
+		if (ndlp->nlp_flag & NLP_NODEV_REMOVE) {
+			lpfc_nlp_list(phba, ndlp, NLP_NO_LIST);
+			return NLP_STE_FREED_NODE;
+		}
+	}
 	return ndlp->nlp_state;
 }
 
@@ -1677,6 +1727,10 @@ lpfc_device_rm_npr_node(struct lpfc_hba * phba,
 			    struct lpfc_nodelist * ndlp, void *arg,
 			    uint32_t evt)
 {
+	if (ndlp->nlp_flag & NLP_NPR_2B_DISC) {
+		ndlp->nlp_flag |= NLP_NODEV_REMOVE;
+		return ndlp->nlp_state;
+	}
 	lpfc_nlp_list(phba, ndlp, NLP_NO_LIST);
 	return NLP_STE_FREED_NODE;
 }
@@ -1687,7 +1741,7 @@ lpfc_device_recov_npr_node(struct lpfc_hba * phba,
 			    uint32_t evt)
 {
 	spin_lock_irq(phba->host->host_lock);
-	ndlp->nlp_flag &= ~NLP_NPR_2B_DISC;
+	ndlp->nlp_flag &= ~(NLP_NODEV_REMOVE | NLP_NPR_2B_DISC);
 	spin_unlock_irq(phba->host->host_lock);
 	if (ndlp->nlp_flag & NLP_DELAY_TMO) {
 		lpfc_cancel_retry_delay_tmo(phba, ndlp);
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index f93799873721..7dc4c2e6bed2 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -629,8 +629,7 @@ lpfc_scsi_prep_task_mgmt_cmd(struct lpfc_hba *phba,
 	struct lpfc_iocbq *piocbq;
 	IOCB_t *piocb;
 	struct fcp_cmnd *fcp_cmnd;
-	struct scsi_device *scsi_dev = lpfc_cmd->pCmd->device;
-	struct lpfc_rport_data *rdata = scsi_dev->hostdata;
+	struct lpfc_rport_data *rdata = lpfc_cmd->rdata;
 	struct lpfc_nodelist *ndlp = rdata->pnode;
 
 	if ((ndlp == NULL) || (ndlp->nlp_state != NLP_STE_MAPPED_NODE)) {
@@ -665,56 +664,18 @@ lpfc_scsi_prep_task_mgmt_cmd(struct lpfc_hba *phba,
 		piocb->ulpTimeout = lpfc_cmd->timeout;
 	}
 
-	lpfc_cmd->rdata = rdata;
-
-	switch (task_mgmt_cmd) {
-	case FCP_LUN_RESET:
-		/* Issue LUN Reset to TGT <num> LUN <num> */
-		lpfc_printf_log(phba,
-				KERN_INFO,
-				LOG_FCP,
-				"%d:0703 Issue LUN Reset to TGT %d LUN %d "
-				"Data: x%x x%x\n",
-				phba->brd_no,
-				scsi_dev->id, scsi_dev->lun,
-				ndlp->nlp_rpi, ndlp->nlp_flag);
-
-		break;
-	case FCP_ABORT_TASK_SET:
-		/* Issue Abort Task Set to TGT <num> LUN <num> */
-		lpfc_printf_log(phba,
-				KERN_INFO,
-				LOG_FCP,
-				"%d:0701 Issue Abort Task Set to TGT %d LUN %d "
-				"Data: x%x x%x\n",
-				phba->brd_no,
-				scsi_dev->id, scsi_dev->lun,
-				ndlp->nlp_rpi, ndlp->nlp_flag);
-
-		break;
-	case FCP_TARGET_RESET:
-		/* Issue Target Reset to TGT <num> */
-		lpfc_printf_log(phba,
-				KERN_INFO,
-				LOG_FCP,
-				"%d:0702 Issue Target Reset to TGT %d "
-				"Data: x%x x%x\n",
-				phba->brd_no,
-				scsi_dev->id, ndlp->nlp_rpi,
-				ndlp->nlp_flag);
-		break;
-	}
-
 	return (1);
 }
 
 static int
-lpfc_scsi_tgt_reset(struct lpfc_scsi_buf * lpfc_cmd, struct lpfc_hba * phba)
+lpfc_scsi_tgt_reset(struct lpfc_scsi_buf * lpfc_cmd, struct lpfc_hba * phba,
+		    unsigned  tgt_id, struct lpfc_rport_data *rdata)
 {
 	struct lpfc_iocbq *iocbq;
 	struct lpfc_iocbq *iocbqrsp;
 	int ret;
 
+	lpfc_cmd->rdata = rdata;
 	ret = lpfc_scsi_prep_task_mgmt_cmd(phba, lpfc_cmd, FCP_TARGET_RESET);
 	if (!ret)
 		return FAILED;
@@ -726,6 +687,13 @@ lpfc_scsi_tgt_reset(struct lpfc_scsi_buf * lpfc_cmd, struct lpfc_hba * phba)
 	if (!iocbqrsp)
 		return FAILED;
 
+	/* Issue Target Reset to TGT <num> */
+	lpfc_printf_log(phba, KERN_INFO, LOG_FCP,
+			"%d:0702 Issue Target Reset to TGT %d "
+			"Data: x%x x%x\n",
+			phba->brd_no, tgt_id, rdata->pnode->nlp_rpi,
+			rdata->pnode->nlp_flag);
+
 	ret = lpfc_sli_issue_iocb_wait(phba,
 				       &phba->sli.ring[phba->sli.fcp_ring],
 				       iocbq, iocbqrsp, lpfc_cmd->timeout);
@@ -1021,6 +989,7 @@ lpfc_reset_lun_handler(struct scsi_cmnd *cmnd)
 	lpfc_cmd->pCmd = cmnd;
 	lpfc_cmd->timeout = 60;
 	lpfc_cmd->scsi_hba = phba;
+	lpfc_cmd->rdata = rdata;
 
 	ret = lpfc_scsi_prep_task_mgmt_cmd(phba, lpfc_cmd, FCP_LUN_RESET);
 	if (!ret)
@@ -1033,6 +1002,11 @@ lpfc_reset_lun_handler(struct scsi_cmnd *cmnd)
 	if (iocbqrsp == NULL)
 		goto out_free_scsi_buf;
 
+	lpfc_printf_log(phba, KERN_INFO, LOG_FCP,
+			"%d:0703 Issue LUN Reset to TGT %d LUN %d "
+			"Data: x%x x%x\n", phba->brd_no, cmnd->device->id,
+			cmnd->device->lun, pnode->nlp_rpi, pnode->nlp_flag);
+
 	ret = lpfc_sli_issue_iocb_wait(phba,
 				       &phba->sli.ring[phba->sli.fcp_ring],
 				       iocbq, iocbqrsp, lpfc_cmd->timeout);
@@ -1104,7 +1078,6 @@ lpfc_reset_bus_handler(struct scsi_cmnd *cmnd)
 	int match;
 	int ret = FAILED, i, err_count = 0;
 	int cnt, loopcnt;
-	unsigned int midlayer_id = 0;
 	struct lpfc_scsi_buf * lpfc_cmd;
 
 	lpfc_block_requests(phba);
@@ -1124,7 +1097,6 @@ lpfc_reset_bus_handler(struct scsi_cmnd *cmnd)
 	 * targets known to the driver.  Should any target reset
 	 * fail, this routine returns failure to the midlayer.
 	 */
-	midlayer_id = cmnd->device->id;
 	for (i = 0; i < MAX_FCP_TARGET; i++) {
 		/* Search the mapped list for this target ID */
 		match = 0;
@@ -1137,9 +1109,8 @@ lpfc_reset_bus_handler(struct scsi_cmnd *cmnd)
 		if (!match)
 			continue;
 
-		lpfc_cmd->pCmd->device->id = i;
-		lpfc_cmd->pCmd->device->hostdata = ndlp->rport->dd_data;
-		ret = lpfc_scsi_tgt_reset(lpfc_cmd, phba);
+		ret = lpfc_scsi_tgt_reset(lpfc_cmd, phba,
+					  i, ndlp->rport->dd_data);
 		if (ret != SUCCESS) {
 			lpfc_printf_log(phba, KERN_ERR, LOG_FCP,
 				"%d:0713 Bus Reset on target %d failed\n",
@@ -1158,7 +1129,6 @@ lpfc_reset_bus_handler(struct scsi_cmnd *cmnd)
 	 * the targets.  Unfortunately, some targets do not abide by
 	 * this forcing the driver to double check.
 	 */
-	cmnd->device->id = midlayer_id;
 	cnt = lpfc_sli_sum_iocb(phba, &phba->sli.ring[phba->sli.fcp_ring],
 				0, 0, LPFC_CTX_HOST);
 	if (cnt)
diff --git a/drivers/scsi/lpfc/lpfc_version.h b/drivers/scsi/lpfc/lpfc_version.h
index 4cf1366108b7..6b737568b831 100644
--- a/drivers/scsi/lpfc/lpfc_version.h
+++ b/drivers/scsi/lpfc/lpfc_version.h
@@ -18,7 +18,7 @@
  * included with this package.                                     *
  *******************************************************************/
 
-#define LPFC_DRIVER_VERSION "8.1.4"
+#define LPFC_DRIVER_VERSION "8.1.6"
 
 #define LPFC_DRIVER_NAME "lpfc"
 
diff --git a/drivers/scsi/megaraid.c b/drivers/scsi/megaraid.c
index d245717fee65..c33857e7b33b 100644
--- a/drivers/scsi/megaraid.c
+++ b/drivers/scsi/megaraid.c
@@ -4471,7 +4471,6 @@ mega_internal_command(adapter_t *adapter, megacmd_t *mc, mega_passthru *pthru)
 {
 	Scsi_Cmnd	*scmd;
 	struct	scsi_device *sdev;
-	unsigned long	flags = 0;
 	scb_t	*scb;
 	int	rval;
 
diff --git a/drivers/scsi/megaraid/megaraid_mbox.c b/drivers/scsi/megaraid/megaraid_mbox.c
index c11e5ce6865e..bec1424eda85 100644
--- a/drivers/scsi/megaraid/megaraid_mbox.c
+++ b/drivers/scsi/megaraid/megaraid_mbox.c
@@ -10,7 +10,7 @@
  *	   2 of the License, or (at your option) any later version.
  *
  * FILE		: megaraid_mbox.c
- * Version	: v2.20.4.7 (Nov 14 2005)
+ * Version	: v2.20.4.8 (Apr 11 2006)
  *
  * Authors:
  * 	Atul Mukker		<Atul.Mukker@lsil.com>
@@ -2278,6 +2278,7 @@ megaraid_mbox_dpc(unsigned long devp)
 	unsigned long		flags;
 	uint8_t			c;
 	int			status;
+	uioc_t			*kioc;
 
 
 	if (!adapter) return;
@@ -2320,6 +2321,9 @@ megaraid_mbox_dpc(unsigned long devp)
 			// remove from local clist
 			list_del_init(&scb->list);
 
+			kioc			= (uioc_t *)scb->gp;
+			kioc->status		= 0;
+
 			megaraid_mbox_mm_done(adapter, scb);
 
 			continue;
@@ -2636,6 +2640,7 @@ megaraid_reset_handler(struct scsi_cmnd *scp)
 	int		recovery_window;
 	int		recovering;
 	int		i;
+	uioc_t		*kioc;
 
 	adapter		= SCP2ADAPTER(scp);
 	raid_dev	= ADAP2RAIDDEV(adapter);
@@ -2655,32 +2660,51 @@ megaraid_reset_handler(struct scsi_cmnd *scp)
 	// Also, reset all the commands currently owned by the driver
 	spin_lock_irqsave(PENDING_LIST_LOCK(adapter), flags);
 	list_for_each_entry_safe(scb, tmp, &adapter->pend_list, list) {
-
 		list_del_init(&scb->list);	// from pending list
 
-		con_log(CL_ANN, (KERN_WARNING
-			"megaraid: %ld:%d[%d:%d], reset from pending list\n",
-				scp->serial_number, scb->sno,
-				scb->dev_channel, scb->dev_target));
+		if (scb->sno >= MBOX_MAX_SCSI_CMDS) {
+			con_log(CL_ANN, (KERN_WARNING
+			"megaraid: IOCTL packet with %d[%d:%d] being reset\n",
+			scb->sno, scb->dev_channel, scb->dev_target));
 
-		scp->result = (DID_RESET << 16);
-		scp->scsi_done(scp);
+			scb->status = -1;
 
-		megaraid_dealloc_scb(adapter, scb);
+			kioc			= (uioc_t *)scb->gp;
+			kioc->status		= -EFAULT;
+
+			megaraid_mbox_mm_done(adapter, scb);
+		} else {
+			if (scb->scp == scp) {	// Found command
+				con_log(CL_ANN, (KERN_WARNING
+					"megaraid: %ld:%d[%d:%d], reset from pending list\n",
+					scp->serial_number, scb->sno,
+					scb->dev_channel, scb->dev_target));
+			} else {
+				con_log(CL_ANN, (KERN_WARNING
+				"megaraid: IO packet with %d[%d:%d] being reset\n",
+				scb->sno, scb->dev_channel, scb->dev_target));
+			}
+
+			scb->scp->result = (DID_RESET << 16);
+			scb->scp->scsi_done(scb->scp);
+
+			megaraid_dealloc_scb(adapter, scb);
+		}
 	}
 	spin_unlock_irqrestore(PENDING_LIST_LOCK(adapter), flags);
 
 	if (adapter->outstanding_cmds) {
 		con_log(CL_ANN, (KERN_NOTICE
 			"megaraid: %d outstanding commands. Max wait %d sec\n",
-			adapter->outstanding_cmds, MBOX_RESET_WAIT));
+			adapter->outstanding_cmds,
+			(MBOX_RESET_WAIT + MBOX_RESET_EXT_WAIT)));
 	}
 
 	recovery_window = MBOX_RESET_WAIT + MBOX_RESET_EXT_WAIT;
 
 	recovering = adapter->outstanding_cmds;
 
-	for (i = 0; i < recovery_window && adapter->outstanding_cmds; i++) {
+	for (i = 0; i < recovery_window; i++) {
 
 		megaraid_ack_sequence(adapter);
 
@@ -2689,12 +2713,11 @@ megaraid_reset_handler(struct scsi_cmnd *scp)
 			con_log(CL_ANN, (
 			"megaraid mbox: Wait for %d commands to complete:%d\n",
 				adapter->outstanding_cmds,
-				MBOX_RESET_WAIT - i));
+				(MBOX_RESET_WAIT + MBOX_RESET_EXT_WAIT) - i));
 		}
 
 		// bailout if no recovery happended in reset time
-		if ((i == MBOX_RESET_WAIT) &&
-			(recovering == adapter->outstanding_cmds)) {
+		if (adapter->outstanding_cmds == 0) {
 			break;
 		}
 
@@ -2918,12 +2941,13 @@ mbox_post_sync_cmd_fast(adapter_t *adapter, uint8_t raw_mbox[])
 	wmb();
 	WRINDOOR(raid_dev, raid_dev->mbox_dma | 0x1);
 
-	for (i = 0; i < 0xFFFFF; i++) {
+	for (i = 0; i < MBOX_SYNC_WAIT_CNT; i++) {
 		if (mbox->numstatus != 0xFF) break;
 		rmb();
+		udelay(MBOX_SYNC_DELAY_200);
 	}
 
-	if (i == 0xFFFFF) {
+	if (i == MBOX_SYNC_WAIT_CNT) {
 		// We may need to re-calibrate the counter
 		con_log(CL_ANN, (KERN_CRIT
 			"megaraid: fast sync command timed out\n"));
@@ -3475,7 +3499,7 @@ megaraid_cmm_register(adapter_t *adapter)
 	adp.drvr_data		= (unsigned long)adapter;
 	adp.pdev		= adapter->pdev;
 	adp.issue_uioc		= megaraid_mbox_mm_handler;
-	adp.timeout		= 300;
+	adp.timeout		= MBOX_RESET_WAIT + MBOX_RESET_EXT_WAIT;
 	adp.max_kioc		= MBOX_MAX_USER_CMDS;
 
 	if ((rval = mraid_mm_register_adp(&adp)) != 0) {
@@ -3702,7 +3726,6 @@ megaraid_mbox_mm_done(adapter_t *adapter, scb_t *scb)
 	unsigned long		flags;
 
 	kioc			= (uioc_t *)scb->gp;
-	kioc->status		= 0;
 	mbox64			= (mbox64_t *)(unsigned long)kioc->cmdbuf;
 	mbox64->mbox32.status	= scb->status;
 	raw_mbox		= (uint8_t *)&mbox64->mbox32;
diff --git a/drivers/scsi/megaraid/megaraid_mbox.h b/drivers/scsi/megaraid/megaraid_mbox.h
index 882fb1a0b575..868fb0ec93e7 100644
--- a/drivers/scsi/megaraid/megaraid_mbox.h
+++ b/drivers/scsi/megaraid/megaraid_mbox.h
@@ -21,8 +21,8 @@
 #include "megaraid_ioctl.h"
 
 
-#define MEGARAID_VERSION	"2.20.4.7"
-#define MEGARAID_EXT_VERSION	"(Release Date: Mon Nov 14 12:27:22 EST 2005)"
+#define MEGARAID_VERSION	"2.20.4.8"
+#define MEGARAID_EXT_VERSION	"(Release Date: Mon Apr 11 12:27:22 EST 2006)"
 
 
 /*
@@ -100,6 +100,9 @@
 #define MBOX_BUSY_WAIT		10	// max usec to wait for busy mailbox
 #define MBOX_RESET_WAIT		180	// wait these many seconds in reset
 #define MBOX_RESET_EXT_WAIT	120	// extended wait reset
+#define MBOX_SYNC_WAIT_CNT	0xFFFF	// wait loop index for synchronous mode
+
+#define MBOX_SYNC_DELAY_200	200	// 200 micro-seconds
 
 /*
  * maximum transfer that can happen through the firmware commands issued
diff --git a/drivers/scsi/megaraid/megaraid_mm.c b/drivers/scsi/megaraid/megaraid_mm.c
index 8f3ce0432295..e8f534fb336b 100644
--- a/drivers/scsi/megaraid/megaraid_mm.c
+++ b/drivers/scsi/megaraid/megaraid_mm.c
@@ -898,10 +898,8 @@ mraid_mm_register_adp(mraid_mmadp_t *lld_adp)
 
 	adapter = kmalloc(sizeof(mraid_mmadp_t), GFP_KERNEL);
 
-	if (!adapter) {
-		rval = -ENOMEM;
-		goto memalloc_error;
-	}
+	if (!adapter)
+		return -ENOMEM;
 
 	memset(adapter, 0, sizeof(mraid_mmadp_t));
 
diff --git a/drivers/scsi/ppa.c b/drivers/scsi/ppa.c
index fee843fab1c7..108910f512e4 100644
--- a/drivers/scsi/ppa.c
+++ b/drivers/scsi/ppa.c
@@ -982,6 +982,12 @@ static int device_check(ppa_struct *dev)
 	return -ENODEV;
 }
 
+static int ppa_adjust_queue(struct scsi_device *device)
+{
+	blk_queue_bounce_limit(device->request_queue, BLK_BOUNCE_HIGH);
+	return 0;
+}
+
 static struct scsi_host_template ppa_template = {
 	.module			= THIS_MODULE,
 	.proc_name		= "ppa",
@@ -997,6 +1003,7 @@ static struct scsi_host_template ppa_template = {
 	.cmd_per_lun		= 1,
 	.use_clustering		= ENABLE_CLUSTERING,
 	.can_queue		= 1,
+	.slave_alloc		= ppa_adjust_queue,
 };
 
 /***************************************************************************
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 1052528c3109..ccaad0b08d35 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -589,6 +589,7 @@ qla2x00_wait_for_loop_ready(scsi_qla_host_t *ha)
 *    Either SUCCESS or FAILED.
 *
 * Note:
+*    Only return FAILED if command not returned by firmware.
 **************************************************************************/
 int
 qla2xxx_eh_abort(struct scsi_cmnd *cmd)
@@ -599,11 +600,12 @@ qla2xxx_eh_abort(struct scsi_cmnd *cmd)
 	unsigned int id, lun;
 	unsigned long serial;
 	unsigned long flags;
+	int wait = 0;
 
 	if (!CMD_SP(cmd))
-		return FAILED;
+		return SUCCESS;
 
-	ret = FAILED;
+	ret = SUCCESS;
 
 	id = cmd->device->id;
 	lun = cmd->device->lun;
@@ -631,7 +633,7 @@ qla2xxx_eh_abort(struct scsi_cmnd *cmd)
 		} else {
 			DEBUG3(printk("%s(%ld): abort_command "
 			    "mbx success.\n", __func__, ha->host_no));
-			ret = SUCCESS;
+			wait = 1;
 		}
 		spin_lock_irqsave(&ha->hardware_lock, flags);
 
@@ -640,17 +642,18 @@ qla2xxx_eh_abort(struct scsi_cmnd *cmd)
 	spin_unlock_irqrestore(&ha->hardware_lock, flags);
 
 	/* Wait for the command to be returned. */
-	if (ret == SUCCESS) {
+	if (wait) {
 		if (qla2x00_eh_wait_on_command(ha, cmd) != QLA_SUCCESS) {
 			qla_printk(KERN_ERR, ha,
 			    "scsi(%ld:%d:%d): Abort handler timed out -- %lx "
 			    "%x.\n", ha->host_no, id, lun, serial, ret);
+			ret = FAILED;
 		}
 	}
 
 	qla_printk(KERN_INFO, ha,
-	    "scsi(%ld:%d:%d): Abort command issued -- %lx %x.\n", ha->host_no,
-	    id, lun, serial, ret);
+	    "scsi(%ld:%d:%d): Abort command issued -- %d %lx %x.\n",
+	    ha->host_no, id, lun, wait, serial, ret);
 
 	return ret;
 }
@@ -1687,8 +1690,8 @@ qla2x00_free_device(scsi_qla_host_t *ha)
 	ha->flags.online = 0;
 
 	/* Detach interrupts */
-	if (ha->pdev->irq)
-		free_irq(ha->pdev->irq, ha);
+	if (ha->host->irq)
+		free_irq(ha->host->irq, ha);
 
 	/* release io space registers  */
 	if (ha->iobase)
diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c
index d5fdcb9a8842..9b8bca1ac1f0 100644
--- a/drivers/scsi/sata_mv.c
+++ b/drivers/scsi/sata_mv.c
@@ -37,7 +37,7 @@
 #include <asm/io.h>
 
 #define DRV_NAME	"sata_mv"
-#define DRV_VERSION	"0.6"
+#define DRV_VERSION	"0.7"
 
 enum {
 	/* BAR's are enumerated in terms of pci_resource_start() terms */
@@ -50,6 +50,12 @@ enum {
 
 	MV_PCI_REG_BASE		= 0,
 	MV_IRQ_COAL_REG_BASE	= 0x18000,	/* 6xxx part only */
+	MV_IRQ_COAL_CAUSE		= (MV_IRQ_COAL_REG_BASE + 0x08),
+	MV_IRQ_COAL_CAUSE_LO		= (MV_IRQ_COAL_REG_BASE + 0x88),
+	MV_IRQ_COAL_CAUSE_HI		= (MV_IRQ_COAL_REG_BASE + 0x8c),
+	MV_IRQ_COAL_THRESHOLD		= (MV_IRQ_COAL_REG_BASE + 0xcc),
+	MV_IRQ_COAL_TIME_THRESHOLD	= (MV_IRQ_COAL_REG_BASE + 0xd0),
+
 	MV_SATAHC0_REG_BASE	= 0x20000,
 	MV_FLASH_CTL		= 0x1046c,
 	MV_GPIO_PORT_CTL	= 0x104f0,
@@ -302,9 +308,6 @@ struct mv_port_priv {
 	dma_addr_t		crpb_dma;
 	struct mv_sg		*sg_tbl;
 	dma_addr_t		sg_tbl_dma;
-
-	unsigned		req_producer;		/* cp of req_in_ptr */
-	unsigned		rsp_consumer;		/* cp of rsp_out_ptr */
 	u32			pp_flags;
 };
 
@@ -937,8 +940,6 @@ static int mv_port_start(struct ata_port *ap)
 	writelfl(pp->crpb_dma & EDMA_RSP_Q_BASE_LO_MASK,
 		 port_mmio + EDMA_RSP_Q_OUT_PTR_OFS);
 
-	pp->req_producer = pp->rsp_consumer = 0;
-
 	/* Don't turn on EDMA here...do it before DMA commands only.  Else
 	 * we'll be unable to send non-data, PIO, etc due to restricted access
 	 * to shadow regs.
@@ -1022,16 +1023,16 @@ static void mv_fill_sg(struct ata_queued_cmd *qc)
 	}
 }
 
-static inline unsigned mv_inc_q_index(unsigned *index)
+static inline unsigned mv_inc_q_index(unsigned index)
 {
-	*index = (*index + 1) & MV_MAX_Q_DEPTH_MASK;
-	return *index;
+	return (index + 1) & MV_MAX_Q_DEPTH_MASK;
 }
 
 static inline void mv_crqb_pack_cmd(u16 *cmdw, u8 data, u8 addr, unsigned last)
 {
-	*cmdw = data | (addr << CRQB_CMD_ADDR_SHIFT) | CRQB_CMD_CS |
+	u16 tmp = data | (addr << CRQB_CMD_ADDR_SHIFT) | CRQB_CMD_CS |
 		(last ? CRQB_CMD_LAST : 0);
+	*cmdw = cpu_to_le16(tmp);
 }
 
 /**
@@ -1053,15 +1054,11 @@ static void mv_qc_prep(struct ata_queued_cmd *qc)
 	u16 *cw;
 	struct ata_taskfile *tf;
 	u16 flags = 0;
+	unsigned in_index;
 
  	if (ATA_PROT_DMA != qc->tf.protocol)
 		return;
 
-	/* the req producer index should be the same as we remember it */
-	WARN_ON(((readl(mv_ap_base(qc->ap) + EDMA_REQ_Q_IN_PTR_OFS) >>
-		  EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) !=
-		pp->req_producer);
-
 	/* Fill in command request block
 	 */
 	if (!(qc->tf.flags & ATA_TFLAG_WRITE))
@@ -1069,13 +1066,17 @@ static void mv_qc_prep(struct ata_queued_cmd *qc)
 	WARN_ON(MV_MAX_Q_DEPTH <= qc->tag);
 	flags |= qc->tag << CRQB_TAG_SHIFT;
 
-	pp->crqb[pp->req_producer].sg_addr =
+	/* get current queue index from hardware */
+	in_index = (readl(mv_ap_base(ap) + EDMA_REQ_Q_IN_PTR_OFS)
+			>> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK;
+
+	pp->crqb[in_index].sg_addr =
 		cpu_to_le32(pp->sg_tbl_dma & 0xffffffff);
-	pp->crqb[pp->req_producer].sg_addr_hi =
+	pp->crqb[in_index].sg_addr_hi =
 		cpu_to_le32((pp->sg_tbl_dma >> 16) >> 16);
-	pp->crqb[pp->req_producer].ctrl_flags = cpu_to_le16(flags);
+	pp->crqb[in_index].ctrl_flags = cpu_to_le16(flags);
 
-	cw = &pp->crqb[pp->req_producer].ata_cmd[0];
+	cw = &pp->crqb[in_index].ata_cmd[0];
 	tf = &qc->tf;
 
 	/* Sadly, the CRQB cannot accomodate all registers--there are
@@ -1144,16 +1145,12 @@ static void mv_qc_prep_iie(struct ata_queued_cmd *qc)
 	struct mv_port_priv *pp = ap->private_data;
 	struct mv_crqb_iie *crqb;
 	struct ata_taskfile *tf;
+	unsigned in_index;
 	u32 flags = 0;
 
  	if (ATA_PROT_DMA != qc->tf.protocol)
 		return;
 
-	/* the req producer index should be the same as we remember it */
-	WARN_ON(((readl(mv_ap_base(qc->ap) + EDMA_REQ_Q_IN_PTR_OFS) >>
-		  EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) !=
-		pp->req_producer);
-
 	/* Fill in Gen IIE command request block
 	 */
 	if (!(qc->tf.flags & ATA_TFLAG_WRITE))
@@ -1162,7 +1159,11 @@ static void mv_qc_prep_iie(struct ata_queued_cmd *qc)
 	WARN_ON(MV_MAX_Q_DEPTH <= qc->tag);
 	flags |= qc->tag << CRQB_TAG_SHIFT;
 
-	crqb = (struct mv_crqb_iie *) &pp->crqb[pp->req_producer];
+	/* get current queue index from hardware */
+	in_index = (readl(mv_ap_base(ap) + EDMA_REQ_Q_IN_PTR_OFS)
+			>> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK;
+
+	crqb = (struct mv_crqb_iie *) &pp->crqb[in_index];
 	crqb->addr = cpu_to_le32(pp->sg_tbl_dma & 0xffffffff);
 	crqb->addr_hi = cpu_to_le32((pp->sg_tbl_dma >> 16) >> 16);
 	crqb->flags = cpu_to_le32(flags);
@@ -1210,6 +1211,7 @@ static unsigned int mv_qc_issue(struct ata_queued_cmd *qc)
 {
 	void __iomem *port_mmio = mv_ap_base(qc->ap);
 	struct mv_port_priv *pp = qc->ap->private_data;
+	unsigned in_index;
 	u32 in_ptr;
 
 	if (ATA_PROT_DMA != qc->tf.protocol) {
@@ -1221,23 +1223,20 @@ static unsigned int mv_qc_issue(struct ata_queued_cmd *qc)
 		return ata_qc_issue_prot(qc);
 	}
 
-	in_ptr = readl(port_mmio + EDMA_REQ_Q_IN_PTR_OFS);
+	in_ptr   = readl(port_mmio + EDMA_REQ_Q_IN_PTR_OFS);
+	in_index = (in_ptr >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK;
 
-	/* the req producer index should be the same as we remember it */
-	WARN_ON(((in_ptr >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) !=
-		pp->req_producer);
 	/* until we do queuing, the queue should be empty at this point */
-	WARN_ON(((in_ptr >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) !=
-		((readl(port_mmio + EDMA_REQ_Q_OUT_PTR_OFS) >>
-		  EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK));
+	WARN_ON(in_index != ((readl(port_mmio + EDMA_REQ_Q_OUT_PTR_OFS)
+		>> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK));
 
-	mv_inc_q_index(&pp->req_producer);	/* now incr producer index */
+	in_index = mv_inc_q_index(in_index);	/* now incr producer index */
 
 	mv_start_dma(port_mmio, pp);
 
 	/* and write the request in pointer to kick the EDMA to life */
 	in_ptr &= EDMA_REQ_Q_BASE_LO_MASK;
-	in_ptr |= pp->req_producer << EDMA_REQ_Q_PTR_SHIFT;
+	in_ptr |= in_index << EDMA_REQ_Q_PTR_SHIFT;
 	writelfl(in_ptr, port_mmio + EDMA_REQ_Q_IN_PTR_OFS);
 
 	return 0;
@@ -1260,28 +1259,26 @@ static u8 mv_get_crpb_status(struct ata_port *ap)
 {
 	void __iomem *port_mmio = mv_ap_base(ap);
 	struct mv_port_priv *pp = ap->private_data;
+	unsigned out_index;
 	u32 out_ptr;
 	u8 ata_status;
 
-	out_ptr = readl(port_mmio + EDMA_RSP_Q_OUT_PTR_OFS);
+	out_ptr   = readl(port_mmio + EDMA_RSP_Q_OUT_PTR_OFS);
+	out_index = (out_ptr >> EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK;
 
-	/* the response consumer index should be the same as we remember it */
-	WARN_ON(((out_ptr >> EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) !=
-		pp->rsp_consumer);
-
-	ata_status = pp->crpb[pp->rsp_consumer].flags >> CRPB_FLAG_STATUS_SHIFT;
+	ata_status = le16_to_cpu(pp->crpb[out_index].flags)
+					>> CRPB_FLAG_STATUS_SHIFT;
 
 	/* increment our consumer index... */
-	pp->rsp_consumer = mv_inc_q_index(&pp->rsp_consumer);
+	out_index = mv_inc_q_index(out_index);
 
 	/* and, until we do NCQ, there should only be 1 CRPB waiting */
-	WARN_ON(((readl(port_mmio + EDMA_RSP_Q_IN_PTR_OFS) >>
-		  EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) !=
-		pp->rsp_consumer);
+	WARN_ON(out_index != ((readl(port_mmio + EDMA_RSP_Q_IN_PTR_OFS)
+		>> EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK));
 
 	/* write out our inc'd consumer index so EDMA knows we're caught up */
 	out_ptr &= EDMA_RSP_Q_BASE_LO_MASK;
-	out_ptr |= pp->rsp_consumer << EDMA_RSP_Q_PTR_SHIFT;
+	out_ptr |= out_index << EDMA_RSP_Q_PTR_SHIFT;
 	writelfl(out_ptr, port_mmio + EDMA_RSP_Q_OUT_PTR_OFS);
 
 	/* Return ATA status register for completed CRPB */
@@ -1291,6 +1288,7 @@ static u8 mv_get_crpb_status(struct ata_port *ap)
 /**
  *      mv_err_intr - Handle error interrupts on the port
  *      @ap: ATA channel to manipulate
+ *      @reset_allowed: bool: 0 == don't trigger from reset here
  *
  *      In most cases, just clear the interrupt and move on.  However,
  *      some cases require an eDMA reset, which is done right before
@@ -1301,7 +1299,7 @@ static u8 mv_get_crpb_status(struct ata_port *ap)
  *      LOCKING:
  *      Inherited from caller.
  */
-static void mv_err_intr(struct ata_port *ap)
+static void mv_err_intr(struct ata_port *ap, int reset_allowed)
 {
 	void __iomem *port_mmio = mv_ap_base(ap);
 	u32 edma_err_cause, serr = 0;
@@ -1323,9 +1321,8 @@ static void mv_err_intr(struct ata_port *ap)
 	writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
 
 	/* check for fatal here and recover if needed */
-	if (EDMA_ERR_FATAL & edma_err_cause) {
+	if (reset_allowed && (EDMA_ERR_FATAL & edma_err_cause))
 		mv_stop_and_reset(ap);
-	}
 }
 
 /**
@@ -1374,12 +1371,12 @@ static void mv_host_intr(struct ata_host_set *host_set, u32 relevant,
 		struct ata_port *ap = host_set->ports[port];
 		struct mv_port_priv *pp = ap->private_data;
 
-		hard_port = port & MV_PORT_MASK;	/* range 0-3 */
+		hard_port = mv_hardport_from_port(port); /* range 0..3 */
 		handled = 0;	/* ensure ata_status is set if handled++ */
 
 		/* Note that DEV_IRQ might happen spuriously during EDMA,
-		 * and should be ignored in such cases.  We could mask it,
-		 * but it's pretty rare and may not be worth the overhead.
+		 * and should be ignored in such cases.
+		 * The cause of this is still under investigation.
 		 */ 
 		if (pp->pp_flags & MV_PP_FLAG_EDMA_EN) {
 			/* EDMA: check for response queue interrupt */
@@ -1393,6 +1390,11 @@ static void mv_host_intr(struct ata_host_set *host_set, u32 relevant,
 				ata_status = readb((void __iomem *)
 					   ap->ioaddr.status_addr);
 				handled = 1;
+				/* ignore spurious intr if drive still BUSY */
+				if (ata_status & ATA_BUSY) {
+					ata_status = 0;
+					handled = 0;
+				}
 			}
 		}
 
@@ -1406,7 +1408,7 @@ static void mv_host_intr(struct ata_host_set *host_set, u32 relevant,
 			shift++;	/* skip bit 8 in the HC Main IRQ reg */
 		}
 		if ((PORT0_ERR << shift) & relevant) {
-			mv_err_intr(ap);
+			mv_err_intr(ap, 1);
 			err_mask |= AC_ERR_OTHER;
 			handled = 1;
 		}
@@ -1448,6 +1450,7 @@ static irqreturn_t mv_interrupt(int irq, void *dev_instance,
 	struct ata_host_set *host_set = dev_instance;
 	unsigned int hc, handled = 0, n_hcs;
 	void __iomem *mmio = host_set->mmio_base;
+	struct mv_host_priv *hpriv;
 	u32 irq_stat;
 
 	irq_stat = readl(mmio + HC_MAIN_IRQ_CAUSE_OFS);
@@ -1469,6 +1472,17 @@ static irqreturn_t mv_interrupt(int irq, void *dev_instance,
 			handled++;
 		}
 	}
+
+	hpriv = host_set->private_data;
+	if (IS_60XX(hpriv)) {
+		/* deal with the interrupt coalescing bits */
+		if (irq_stat & (TRAN_LO_DONE | TRAN_HI_DONE | PORTS_0_7_COAL_DONE)) {
+			writelfl(0, mmio + MV_IRQ_COAL_CAUSE_LO);
+			writelfl(0, mmio + MV_IRQ_COAL_CAUSE_HI);
+			writelfl(0, mmio + MV_IRQ_COAL_CAUSE);
+		}
+	}
+
 	if (PCI_ERR & irq_stat) {
 		printk(KERN_ERR DRV_NAME ": PCI ERROR; PCI IRQ cause=0x%08x\n",
 		       readl(mmio + PCI_IRQ_CAUSE_OFS));
@@ -1867,7 +1881,8 @@ static void mv_channel_reset(struct mv_host_priv *hpriv, void __iomem *mmio,
 
 	if (IS_60XX(hpriv)) {
 		u32 ifctl = readl(port_mmio + SATA_INTERFACE_CTL);
-		ifctl |= (1 << 12) | (1 << 7);
+		ifctl |= (1 << 7);		/* enable gen2i speed */
+		ifctl = (ifctl & 0xfff) | 0x9b1000; /* from chip spec */
 		writelfl(ifctl, port_mmio + SATA_INTERFACE_CTL);
 	}
 
@@ -2031,11 +2046,14 @@ static void mv_eng_timeout(struct ata_port *ap)
 	       ap->host_set->mmio_base, ap, qc, qc->scsicmd,
 	       &qc->scsicmd->cmnd);
 
-	mv_err_intr(ap);
+	mv_err_intr(ap, 0);
 	mv_stop_and_reset(ap);
 
-	qc->err_mask |= AC_ERR_TIMEOUT;
-	ata_eh_qc_complete(qc);
+	WARN_ON(!(qc->flags & ATA_QCFLAG_ACTIVE));
+	if (qc->flags & ATA_QCFLAG_ACTIVE) {
+		qc->err_mask |= AC_ERR_TIMEOUT;
+		ata_eh_qc_complete(qc);
+	}
 }
 
 /**
@@ -2229,7 +2247,8 @@ static int mv_init_host(struct pci_dev *pdev, struct ata_probe_ent *probe_ent,
 			void __iomem *port_mmio = mv_port_base(mmio, port);
 
 			u32 ifctl = readl(port_mmio + SATA_INTERFACE_CTL);
-			ifctl |= (1 << 12);
+			ifctl |= (1 << 7);		/* enable gen2i speed */
+			ifctl = (ifctl & 0xfff) | 0x9b1000; /* from chip spec */
 			writelfl(ifctl, port_mmio + SATA_INTERFACE_CTL);
 		}
 
@@ -2330,6 +2349,7 @@ static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (rc) {
 		return rc;
 	}
+	pci_set_master(pdev);
 
 	rc = pci_request_regions(pdev, DRV_NAME);
 	if (rc) {
diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c
index f7264fd611c2..cb9082fd7e2f 100644
--- a/drivers/scsi/sata_sil24.c
+++ b/drivers/scsi/sata_sil24.c
@@ -454,7 +454,7 @@ static int sil24_softreset(struct ata_port *ap, int verbose,
 	 */
 	msleep(10);
 
-	prb->ctrl = PRB_CTRL_SRST;
+	prb->ctrl = cpu_to_le16(PRB_CTRL_SRST);
 	prb->fis[1] = 0; /* no PM yet */
 
 	writel((u32)paddr, port + PORT_CMD_ACTIVATE);
@@ -551,9 +551,9 @@ static void sil24_qc_prep(struct ata_queued_cmd *qc)
 
 		if (qc->tf.protocol != ATA_PROT_ATAPI_NODATA) {
 			if (qc->tf.flags & ATA_TFLAG_WRITE)
-				prb->ctrl = PRB_CTRL_PACKET_WRITE;
+				prb->ctrl = cpu_to_le16(PRB_CTRL_PACKET_WRITE);
 			else
-				prb->ctrl = PRB_CTRL_PACKET_READ;
+				prb->ctrl = cpu_to_le16(PRB_CTRL_PACKET_READ);
 		} else
 			prb->ctrl = 0;
 
diff --git a/drivers/scsi/scsi_devinfo.c b/drivers/scsi/scsi_devinfo.c
index ae13e4a78d51..fb5cb4c9ac65 100644
--- a/drivers/scsi/scsi_devinfo.c
+++ b/drivers/scsi/scsi_devinfo.c
@@ -56,6 +56,8 @@ static struct {
 	{"DENON", "DRD-25X", "V", BLIST_NOLUN},			/* locks up */
 	{"HITACHI", "DK312C", "CM81", BLIST_NOLUN},	/* responds to all lun */
 	{"HITACHI", "DK314C", "CR21", BLIST_NOLUN},	/* responds to all lun */
+	{"IBM", "2104-DU3", NULL, BLIST_NOLUN},		/* locks up */
+	{"IBM", "2104-TU3", NULL, BLIST_NOLUN},		/* locks up */
 	{"IMS", "CDD521/10", "2.06", BLIST_NOLUN},	/* locks up */
 	{"MAXTOR", "XT-3280", "PR02", BLIST_NOLUN},	/* locks up */
 	{"MAXTOR", "XT-4380S", "B3C", BLIST_NOLUN},	/* locks up */
@@ -165,6 +167,7 @@ static struct {
 	{"HP", "HSV100", NULL, BLIST_REPORTLUN2 | BLIST_NOSTARTONADD},
 	{"HP", "C1557A", NULL, BLIST_FORCELUN},
 	{"HP", "C3323-300", "4269", BLIST_NOTQ},
+	{"HP", "C5713A", NULL, BLIST_NOREPORTLUN},
 	{"IBM", "AuSaV1S2", NULL, BLIST_FORCELUN},
 	{"IBM", "ProFibre 4000R", "*", BLIST_SPARSELUN | BLIST_LARGELUN},
 	{"IBM", "2105", NULL, BLIST_RETRY_HWERROR},
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index 3ca7b9d3086c..bdce9d1f5b71 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -367,7 +367,7 @@ static int scsi_req_map_sg(struct request *rq, struct scatterlist *sgl,
 			   int nsegs, unsigned bufflen, gfp_t gfp)
 {
 	struct request_queue *q = rq->q;
-	int nr_pages = (bufflen + PAGE_SIZE - 1) >> PAGE_SHIFT;
+	int nr_pages = (bufflen + sgl[0].offset + PAGE_SIZE - 1) >> PAGE_SHIFT;
 	unsigned int data_len = 0, len, bytes, off;
 	struct page *page;
 	struct bio *bio = NULL;
@@ -1067,16 +1067,29 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes,
 			break;
 		case NOT_READY:
 			/*
-			 * If the device is in the process of becoming ready,
-			 * retry.
+			 * If the device is in the process of becoming
+			 * ready, or has a temporary blockage, retry.
 			 */
-			if (sshdr.asc == 0x04 && sshdr.ascq == 0x01) {
-				scsi_requeue_command(q, cmd);
-				return;
+			if (sshdr.asc == 0x04) {
+				switch (sshdr.ascq) {
+				case 0x01: /* becoming ready */
+				case 0x04: /* format in progress */
+				case 0x05: /* rebuild in progress */
+				case 0x06: /* recalculation in progress */
+				case 0x07: /* operation in progress */
+				case 0x08: /* Long write in progress */
+				case 0x09: /* self test in progress */
+					scsi_requeue_command(q, cmd);
+					return;
+				default:
+					break;
+				}
 			}
-			if (!(req->flags & REQ_QUIET))
+			if (!(req->flags & REQ_QUIET)) {
 				scmd_printk(KERN_INFO, cmd,
-					   "Device not ready.\n");
+					   "Device not ready: ");
+				scsi_print_sense_hdr("", &sshdr);
+			}
 			scsi_end_request(cmd, 0, this_count, 1);
 			return;
 		case VOLUME_OVERFLOW:
diff --git a/drivers/scsi/scsi_transport_sas.c b/drivers/scsi/scsi_transport_sas.c
index ce4f806bd8ec..6da6721eb0db 100644
--- a/drivers/scsi/scsi_transport_sas.c
+++ b/drivers/scsi/scsi_transport_sas.c
@@ -955,7 +955,8 @@ static int sas_user_scan(struct Scsi_Host *shost, uint channel,
 	list_for_each_entry(rphy, &sas_host->rphy_list, list) {
 		struct sas_phy *parent = dev_to_phy(rphy->dev.parent);
 
-		if (rphy->scsi_target_id == -1)
+		if (rphy->identify.device_type != SAS_END_DEVICE ||
+		    rphy->scsi_target_id == -1)
 			continue;
 
 		if ((channel == SCAN_WILD_CARD || channel == parent->port_identifier) &&
@@ -977,7 +978,6 @@ static int sas_user_scan(struct Scsi_Host *shost, uint channel,
 #define SETUP_TEMPLATE(attrb, field, perm, test)				\
 	i->private_##attrb[count] = class_device_attr_##field;		\
 	i->private_##attrb[count].attr.mode = perm;			\
-	i->private_##attrb[count].store = NULL;				\
 	i->attrb[count] = &i->private_##attrb[count];			\
 	if (test)							\
 		count++
diff --git a/drivers/scsi/sim710.c b/drivers/scsi/sim710.c
index 3274ab76c8d3..255886a9ac55 100644
--- a/drivers/scsi/sim710.c
+++ b/drivers/scsi/sim710.c
@@ -75,7 +75,7 @@ param_setup(char *str)
 		else if(!strncmp(pos, "id:", 3)) {
 			if(slot == -1) {
 				printk(KERN_WARNING "sim710: Must specify slot for id parameter\n");
-			} else if(slot > MAX_SLOTS) {
+			} else if(slot >= MAX_SLOTS) {
 				printk(KERN_WARNING "sim710: Illegal slot %d for id %d\n", slot, val);
 			} else {
 				id_array[slot] = val;
diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c
index 2691248b2cbd..ad87d73f88ee 100644
--- a/drivers/scsi/st.c
+++ b/drivers/scsi/st.c
@@ -4054,7 +4054,7 @@ static int st_probe(struct device *dev)
 	}
 
 	sdev_printk(KERN_WARNING, SDp,
-		    "Attached scsi tape %s", tape_name(tpnt));
+		    "Attached scsi tape %s\n", tape_name(tpnt));
 	printk(KERN_WARNING "%s: try direct i/o: %s (alignment %d B)\n",
 	       tape_name(tpnt), tpnt->try_dio ? "yes" : "no",
 	       queue_dma_alignment(SDp->request_queue) + 1);
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 674b15c78f68..bbf78aaf9e01 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -362,6 +362,40 @@ serial_out(struct uart_8250_port *up, int offset, int value)
 #define serial_inp(up, offset)		serial_in(up, offset)
 #define serial_outp(up, offset, value)	serial_out(up, offset, value)
 
+/* Uart divisor latch read */
+static inline int _serial_dl_read(struct uart_8250_port *up)
+{
+	return serial_inp(up, UART_DLL) | serial_inp(up, UART_DLM) << 8;
+}
+
+/* Uart divisor latch write */
+static inline void _serial_dl_write(struct uart_8250_port *up, int value)
+{
+	serial_outp(up, UART_DLL, value & 0xff);
+	serial_outp(up, UART_DLM, value >> 8 & 0xff);
+}
+
+#ifdef CONFIG_SERIAL_8250_AU1X00
+/* Au1x00 haven't got a standard divisor latch */
+static int serial_dl_read(struct uart_8250_port *up)
+{
+	if (up->port.iotype == UPIO_AU)
+		return __raw_readl(up->port.membase + 0x28);
+	else
+		return _serial_dl_read(up);
+}
+
+static void serial_dl_write(struct uart_8250_port *up, int value)
+{
+	if (up->port.iotype == UPIO_AU)
+		__raw_writel(value, up->port.membase + 0x28);
+	else
+		_serial_dl_write(up, value);
+}
+#else
+#define serial_dl_read(up) _serial_dl_read(up)
+#define serial_dl_write(up, value) _serial_dl_write(up, value)
+#endif
 
 /*
  * For the 16C950
@@ -494,7 +528,8 @@ static void disable_rsa(struct uart_8250_port *up)
  */
 static int size_fifo(struct uart_8250_port *up)
 {
-	unsigned char old_fcr, old_mcr, old_dll, old_dlm, old_lcr;
+	unsigned char old_fcr, old_mcr, old_lcr;
+	unsigned short old_dl;
 	int count;
 
 	old_lcr = serial_inp(up, UART_LCR);
@@ -505,10 +540,8 @@ static int size_fifo(struct uart_8250_port *up)
 		    UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
 	serial_outp(up, UART_MCR, UART_MCR_LOOP);
 	serial_outp(up, UART_LCR, UART_LCR_DLAB);
-	old_dll = serial_inp(up, UART_DLL);
-	old_dlm = serial_inp(up, UART_DLM);
-	serial_outp(up, UART_DLL, 0x01);
-	serial_outp(up, UART_DLM, 0x00);
+	old_dl = serial_dl_read(up);
+	serial_dl_write(up, 0x0001);
 	serial_outp(up, UART_LCR, 0x03);
 	for (count = 0; count < 256; count++)
 		serial_outp(up, UART_TX, count);
@@ -519,8 +552,7 @@ static int size_fifo(struct uart_8250_port *up)
 	serial_outp(up, UART_FCR, old_fcr);
 	serial_outp(up, UART_MCR, old_mcr);
 	serial_outp(up, UART_LCR, UART_LCR_DLAB);
-	serial_outp(up, UART_DLL, old_dll);
-	serial_outp(up, UART_DLM, old_dlm);
+	serial_dl_write(up, old_dl);
 	serial_outp(up, UART_LCR, old_lcr);
 
 	return count;
@@ -750,8 +782,7 @@ static void autoconfig_16550a(struct uart_8250_port *up)
 
 			serial_outp(up, UART_LCR, 0xE0);
 
-			quot = serial_inp(up, UART_DLM) << 8;
-			quot += serial_inp(up, UART_DLL);
+			quot = serial_dl_read(up);
 			quot <<= 3;
 
 			status1 = serial_in(up, 0x04); /* EXCR1 */
@@ -759,8 +790,7 @@ static void autoconfig_16550a(struct uart_8250_port *up)
 			status1 |= 0x10;  /* 1.625 divisor for baud_base --> 921600 */
 			serial_outp(up, 0x04, status1);
 			
-			serial_outp(up, UART_DLL, quot & 0xff);
-			serial_outp(up, UART_DLM, quot >> 8);
+			serial_dl_write(up, quot);
 
 			serial_outp(up, UART_LCR, 0);
 
@@ -1862,8 +1892,7 @@ serial8250_set_termios(struct uart_port *port, struct termios *termios,
 		serial_outp(up, UART_LCR, cval | UART_LCR_DLAB);/* set DLAB */
 	}
 
-	serial_outp(up, UART_DLL, quot & 0xff);		/* LS of divisor */
-	serial_outp(up, UART_DLM, quot >> 8);		/* MS of divisor */
+	serial_dl_write(up, quot);
 
 	/*
 	 * LCR DLAB must be set to enable 64-byte FIFO mode. If the FCR
@@ -1906,6 +1935,9 @@ static int serial8250_request_std_resource(struct uart_8250_port *up)
 	int ret = 0;
 
 	switch (up->port.iotype) {
+	case UPIO_AU:
+		size = 0x100000;
+		/* fall thru */
 	case UPIO_MEM:
 		if (!up->port.mapbase)
 			break;
@@ -1938,6 +1970,9 @@ static void serial8250_release_std_resource(struct uart_8250_port *up)
 	unsigned int size = 8 << up->port.regshift;
 
 	switch (up->port.iotype) {
+	case UPIO_AU:
+		size = 0x100000;
+		/* fall thru */
 	case UPIO_MEM:
 		if (!up->port.mapbase)
 			break;
@@ -2200,10 +2235,17 @@ static void
 serial8250_console_write(struct console *co, const char *s, unsigned int count)
 {
 	struct uart_8250_port *up = &serial8250_ports[co->index];
+	unsigned long flags;
 	unsigned int ier;
+	int locked = 1;
 
 	touch_nmi_watchdog();
 
+	if (oops_in_progress) {
+		locked = spin_trylock_irqsave(&up->port.lock, flags);
+	} else
+		spin_lock_irqsave(&up->port.lock, flags);
+
 	/*
 	 *	First save the IER then disable the interrupts
 	 */
@@ -2221,8 +2263,10 @@ serial8250_console_write(struct console *co, const char *s, unsigned int count)
 	 *	and restore the IER
 	 */
 	wait_for_xmitr(up, BOTH_EMPTY);
-	up->ier |= UART_IER_THRI;
-	serial_out(up, UART_IER, ier | UART_IER_THRI);
+	serial_out(up, UART_IER, ier);
+
+	if (locked)
+		spin_unlock_irqrestore(&up->port.lock, flags);
 }
 
 static int serial8250_console_setup(struct console *co, char *options)
diff --git a/drivers/serial/8250_au1x00.c b/drivers/serial/8250_au1x00.c
index 3d1bfd07208d..58015fd14be9 100644
--- a/drivers/serial/8250_au1x00.c
+++ b/drivers/serial/8250_au1x00.c
@@ -30,13 +30,12 @@
 	{						\
 		.iobase		= _base,		\
 		.membase	= (void __iomem *)_base,\
-		.mapbase	= _base,		\
+		.mapbase	= CPHYSADDR(_base),	\
 		.irq		= _irq,			\
 		.uartclk	= 0,	/* filled */	\
 		.regshift	= 2,			\
 		.iotype		= UPIO_AU,		\
-		.flags		= UPF_SKIP_TEST | 	\
-				  UPF_IOREMAP,		\
+		.flags		= UPF_SKIP_TEST 	\
 	}
 
 static struct plat_serial8250_port au1x00_data[] = {
diff --git a/drivers/serial/cpm_uart/cpm_uart.h b/drivers/serial/cpm_uart/cpm_uart.h
index 73c8a088c160..3b35cb779539 100644
--- a/drivers/serial/cpm_uart/cpm_uart.h
+++ b/drivers/serial/cpm_uart/cpm_uart.h
@@ -5,11 +5,20 @@
  *
  *  Copyright (C) 2004 Freescale Semiconductor, Inc.
  *
+ *  2006 (c) MontaVista Software, Inc.
+ * 	Vitaly Bordug <vbordug@ru.mvista.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ *
  */
 #ifndef CPM_UART_H
 #define CPM_UART_H
 
 #include <linux/config.h>
+#include <linux/platform_device.h>
+#include <linux/fs_uart_pd.h>
 
 #if defined(CONFIG_CPM2)
 #include "cpm_uart_cpm2.h"
@@ -26,14 +35,14 @@
 #define FLAG_SMC	0x00000002
 #define FLAG_CONSOLE	0x00000001
 
-#define UART_SMC1	0
-#define UART_SMC2	1
-#define UART_SCC1	2
-#define UART_SCC2	3
-#define UART_SCC3	4
-#define UART_SCC4	5
+#define UART_SMC1	fsid_smc1_uart
+#define UART_SMC2	fsid_smc2_uart
+#define UART_SCC1	fsid_scc1_uart
+#define UART_SCC2	fsid_scc2_uart
+#define UART_SCC3	fsid_scc3_uart
+#define UART_SCC4	fsid_scc4_uart
 
-#define UART_NR	6
+#define UART_NR		fs_uart_nr
 
 #define RX_NUM_FIFO	4
 #define RX_BUF_SIZE	32
@@ -64,6 +73,7 @@ struct uart_cpm_port {
 	uint			 dp_addr;
 	void			*mem_addr;
 	dma_addr_t		 dma_addr;
+	u32			mem_size;
 	/* helpers */
 	int			 baud;
 	int			 bits;
@@ -90,4 +100,38 @@ void scc2_lineif(struct uart_cpm_port *pinfo);
 void scc3_lineif(struct uart_cpm_port *pinfo);
 void scc4_lineif(struct uart_cpm_port *pinfo);
 
+/*
+   virtual to phys transtalion
+*/
+static inline unsigned long cpu2cpm_addr(void* addr, struct uart_cpm_port *pinfo)
+{
+	int offset;
+	u32 val = (u32)addr;
+	/* sane check */
+	if (likely((val >= (u32)pinfo->mem_addr)) &&
+			(val<((u32)pinfo->mem_addr + pinfo->mem_size))) {
+		offset = val - (u32)pinfo->mem_addr;
+		return pinfo->dma_addr+offset;
+	}
+	/* something nasty happened */
+	BUG();
+	return 0;
+}
+
+static inline void *cpm2cpu_addr(unsigned long addr, struct uart_cpm_port *pinfo)
+{
+	int offset;
+	u32 val = addr;
+	/* sane check */
+	if (likely((val >= pinfo->dma_addr) &&
+			(val<(pinfo->dma_addr + pinfo->mem_size)))) {
+		offset = val - (u32)pinfo->dma_addr;
+		return (void*)(pinfo->mem_addr+offset);
+	}
+	/* something nasty happened */
+	BUG();
+	return 0;
+}
+
+
 #endif /* CPM_UART_H */
diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c
index b7bf4c698a47..5cba59ad7dc5 100644
--- a/drivers/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/serial/cpm_uart/cpm_uart_core.c
@@ -12,7 +12,8 @@
  *
  *  Copyright (C) 2004 Freescale Semiconductor, Inc.
  *            (C) 2004 Intracom, S.A.
- *            (C) 2005 MontaVista Software, Inc. by Vitaly Bordug <vbordug@ru.mvista.com>
+ *            (C) 2005-2006 MontaVista Software, Inc.
+ * 		Vitaly Bordug <vbordug@ru.mvista.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -41,6 +42,7 @@
 #include <linux/device.h>
 #include <linux/bootmem.h>
 #include <linux/dma-mapping.h>
+#include <linux/fs_uart_pd.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
@@ -60,7 +62,7 @@
 /* Track which ports are configured as uarts */
 int cpm_uart_port_map[UART_NR];
 /* How many ports did we config as uarts */
-int cpm_uart_nr;
+int cpm_uart_nr = 0;
 
 /**************************************************************/
 
@@ -71,18 +73,51 @@ static void cpm_uart_initbd(struct uart_cpm_port *pinfo);
 
 /**************************************************************/
 
-static inline unsigned long cpu2cpm_addr(void *addr)
+
+/* Place-holder for board-specific stuff */
+struct platform_device* __attribute__ ((weak)) __init
+early_uart_get_pdev(int index)
+{
+	return NULL;
+}
+
+
+static void cpm_uart_count(void)
 {
-	if ((unsigned long)addr >= CPM_ADDR)
-		return (unsigned long)addr;
-	return virt_to_bus(addr);
+	cpm_uart_nr = 0;
+#ifdef CONFIG_SERIAL_CPM_SMC1
+	cpm_uart_port_map[cpm_uart_nr++] = UART_SMC1;
+#endif
+#ifdef CONFIG_SERIAL_CPM_SMC2
+	cpm_uart_port_map[cpm_uart_nr++] = UART_SMC2;
+#endif
+#ifdef CONFIG_SERIAL_CPM_SCC1
+	cpm_uart_port_map[cpm_uart_nr++] = UART_SCC1;
+#endif
+#ifdef CONFIG_SERIAL_CPM_SCC2
+	cpm_uart_port_map[cpm_uart_nr++] = UART_SCC2;
+#endif
+#ifdef CONFIG_SERIAL_CPM_SCC3
+	cpm_uart_port_map[cpm_uart_nr++] = UART_SCC3;
+#endif
+#ifdef CONFIG_SERIAL_CPM_SCC4
+	cpm_uart_port_map[cpm_uart_nr++] = UART_SCC4;
+#endif
 }
 
-static inline void *cpm2cpu_addr(unsigned long addr)
+/* Get UART number by its id */
+static int cpm_uart_id2nr(int id)
 {
-	if (addr >= CPM_ADDR)
-		return (void *)addr;
-	return bus_to_virt(addr);
+	int i;
+	if (id < UART_NR) {
+		for (i=0; i<UART_NR; i++) {
+			if (cpm_uart_port_map[i] == id)
+				return i;
+		}
+	}
+
+	/* not found or invalid argument */
+	return -1;
 }
 
 /*
@@ -258,7 +293,7 @@ static void cpm_uart_int_rx(struct uart_port *port, struct pt_regs *regs)
 		}
 
 		/* get pointer */
-		cp = cpm2cpu_addr(bdp->cbd_bufaddr);
+		cp = cpm2cpu_addr(bdp->cbd_bufaddr, pinfo);
 
 		/* loop through the buffer */
 		while (i-- > 0) {
@@ -438,7 +473,11 @@ static void cpm_uart_shutdown(struct uart_port *port)
 		}
 
 		/* Shut them really down and reinit buffer descriptors */
-		cpm_line_cr_cmd(line, CPM_CR_STOP_TX);
+		if (IS_SMC(pinfo))
+			cpm_line_cr_cmd(line, CPM_CR_STOP_TX);
+		else
+			cpm_line_cr_cmd(line, CPM_CR_GRA_STOP_TX);
+
 		cpm_uart_initbd(pinfo);
 	}
 }
@@ -601,7 +640,7 @@ static int cpm_uart_tx_pump(struct uart_port *port)
 		/* Pick next descriptor and fill from buffer */
 		bdp = pinfo->tx_cur;
 
-		p = cpm2cpu_addr(bdp->cbd_bufaddr);
+		p = cpm2cpu_addr(bdp->cbd_bufaddr, pinfo);
 
 		*p++ = port->x_char;
 		bdp->cbd_datlen = 1;
@@ -628,7 +667,7 @@ static int cpm_uart_tx_pump(struct uart_port *port)
 
 	while (!(bdp->cbd_sc & BD_SC_READY) && (xmit->tail != xmit->head)) {
 		count = 0;
-		p = cpm2cpu_addr(bdp->cbd_bufaddr);
+		p = cpm2cpu_addr(bdp->cbd_bufaddr, pinfo);
 		while (count < pinfo->tx_fifosize) {
 			*p++ = xmit->buf[xmit->tail];
 			xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
@@ -677,12 +716,12 @@ static void cpm_uart_initbd(struct uart_cpm_port *pinfo)
 	mem_addr = pinfo->mem_addr;
 	bdp = pinfo->rx_cur = pinfo->rx_bd_base;
 	for (i = 0; i < (pinfo->rx_nrfifos - 1); i++, bdp++) {
-		bdp->cbd_bufaddr = cpu2cpm_addr(mem_addr);
+		bdp->cbd_bufaddr = cpu2cpm_addr(mem_addr, pinfo);
 		bdp->cbd_sc = BD_SC_EMPTY | BD_SC_INTRPT;
 		mem_addr += pinfo->rx_fifosize;
 	}
 
-	bdp->cbd_bufaddr = cpu2cpm_addr(mem_addr);
+	bdp->cbd_bufaddr = cpu2cpm_addr(mem_addr, pinfo);
 	bdp->cbd_sc = BD_SC_WRAP | BD_SC_EMPTY | BD_SC_INTRPT;
 
 	/* Set the physical address of the host memory
@@ -692,12 +731,12 @@ static void cpm_uart_initbd(struct uart_cpm_port *pinfo)
 	mem_addr = pinfo->mem_addr + L1_CACHE_ALIGN(pinfo->rx_nrfifos * pinfo->rx_fifosize);
 	bdp = pinfo->tx_cur = pinfo->tx_bd_base;
 	for (i = 0; i < (pinfo->tx_nrfifos - 1); i++, bdp++) {
-		bdp->cbd_bufaddr = cpu2cpm_addr(mem_addr);
+		bdp->cbd_bufaddr = cpu2cpm_addr(mem_addr, pinfo);
 		bdp->cbd_sc = BD_SC_INTRPT;
 		mem_addr += pinfo->tx_fifosize;
 	}
 
-	bdp->cbd_bufaddr = cpu2cpm_addr(mem_addr);
+	bdp->cbd_bufaddr = cpu2cpm_addr(mem_addr, pinfo);
 	bdp->cbd_sc = BD_SC_WRAP | BD_SC_INTRPT;
 }
 
@@ -829,14 +868,6 @@ static int cpm_uart_request_port(struct uart_port *port)
 	if (pinfo->flags & FLAG_CONSOLE)
 		return 0;
 
-	/*
-	 * Setup any port IO, connect any baud rate generators,
-	 * etc.  This is expected to be handled by board
-	 * dependant code
-	 */
-	if (pinfo->set_lineif)
-		pinfo->set_lineif(pinfo);
-
 	if (IS_SMC(pinfo)) {
 		pinfo->smcp->smc_smcm &= ~(SMCM_RX | SMCM_TX);
 		pinfo->smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
@@ -988,6 +1019,58 @@ struct uart_cpm_port cpm_uart_ports[UART_NR] = {
 	},
 };
 
+int cpm_uart_drv_get_platform_data(struct platform_device *pdev, int is_con)
+{
+	struct resource *r;
+	struct fs_uart_platform_info *pdata = pdev->dev.platform_data;
+	int idx = pdata->fs_no;	/* It is UART_SMCx or UART_SCCx index */
+	struct uart_cpm_port *pinfo;
+	int line;
+	u32 mem, pram;
+
+	line = cpm_uart_id2nr(idx);
+	if(line < 0) {
+		printk(KERN_ERR"%s(): port %d is not registered", __FUNCTION__, idx);
+		return -1;
+	}
+
+	pinfo = (struct uart_cpm_port *) &cpm_uart_ports[idx];
+
+	pinfo->brg = pdata->brg;
+
+	if (!is_con) {
+		pinfo->port.line = line;
+		pinfo->port.flags = UPF_BOOT_AUTOCONF;
+	}
+
+	if (!(r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs")))
+		return -EINVAL;
+	mem = r->start;
+
+	if (!(r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pram")))
+		return -EINVAL;
+	pram = r->start;
+
+	if(idx > fsid_smc2_uart) {
+		pinfo->sccp = (scc_t *)mem;
+		pinfo->sccup = (scc_uart_t *)pram;
+	} else {
+		pinfo->smcp = (smc_t *)mem;
+		pinfo->smcup = (smc_uart_t *)pram;
+	}
+	pinfo->tx_nrfifos = pdata->tx_num_fifo;
+	pinfo->tx_fifosize = pdata->tx_buf_size;
+
+	pinfo->rx_nrfifos = pdata->rx_num_fifo;
+	pinfo->rx_fifosize = pdata->rx_buf_size;
+
+	pinfo->port.uartclk = pdata->uart_clk;
+	pinfo->port.mapbase = (unsigned long)mem;
+	pinfo->port.irq = platform_get_irq(pdev, 0);
+
+	return 0;
+}
+
 #ifdef CONFIG_SERIAL_CPM_CONSOLE
 /*
  *	Print a string to the serial port trying not to disturb
@@ -1027,7 +1110,7 @@ static void cpm_uart_console_write(struct console *co, const char *s,
 		 * If the buffer address is in the CPM DPRAM, don't
 		 * convert it.
 		 */
-		cp = cpm2cpu_addr(bdp->cbd_bufaddr);
+		cp = cpm2cpu_addr(bdp->cbd_bufaddr, pinfo);
 
 		*cp = *s;
 
@@ -1044,7 +1127,7 @@ static void cpm_uart_console_write(struct console *co, const char *s,
 			while ((bdp->cbd_sc & BD_SC_READY) != 0)
 				;
 
-			cp = cpm2cpu_addr(bdp->cbd_bufaddr);
+			cp = cpm2cpu_addr(bdp->cbd_bufaddr, pinfo);
 
 			*cp = 13;
 			bdp->cbd_datlen = 1;
@@ -1067,9 +1150,7 @@ static void cpm_uart_console_write(struct console *co, const char *s,
 	pinfo->tx_cur = (volatile cbd_t *) bdp;
 }
 
-/*
- * Setup console. Be careful is called early !
- */
+
 static int __init cpm_uart_console_setup(struct console *co, char *options)
 {
 	struct uart_port *port;
@@ -1080,9 +1161,29 @@ static int __init cpm_uart_console_setup(struct console *co, char *options)
 	int flow = 'n';
 	int ret;
 
+	struct fs_uart_platform_info *pdata;
+	struct platform_device* pdev = early_uart_get_pdev(co->index);
+
+	if (!pdev) {
+		pr_info("cpm_uart: console: compat mode\n");
+		/* compatibility - will be cleaned up */
+		cpm_uart_init_portdesc();
+	}
+
 	port =
 	    (struct uart_port *)&cpm_uart_ports[cpm_uart_port_map[co->index]];
 	pinfo = (struct uart_cpm_port *)port;
+	if (!pdev) {
+		if (pinfo->set_lineif)
+			pinfo->set_lineif(pinfo);
+	} else {
+		pdata = pdev->dev.platform_data;
+		if (pdata)
+			if (pdata->init_ioports)
+    	                	pdata->init_ioports();
+
+		cpm_uart_drv_get_platform_data(pdev, 1);
+	}
 
 	pinfo->flags |= FLAG_CONSOLE;
 
@@ -1097,14 +1198,6 @@ static int __init cpm_uart_console_setup(struct console *co, char *options)
 			baud = 9600;
 	}
 
-	/*
-	 * Setup any port IO, connect any baud rate generators,
-	 * etc.  This is expected to be handled by board
-	 * dependant code
-	 */
-	if (pinfo->set_lineif)
-		pinfo->set_lineif(pinfo);
-
 	if (IS_SMC(pinfo)) {
 		pinfo->smcp->smc_smcm &= ~(SMCM_RX | SMCM_TX);
 		pinfo->smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
@@ -1143,11 +1236,8 @@ static struct console cpm_scc_uart_console = {
 
 int __init cpm_uart_console_init(void)
 {
-	int ret = cpm_uart_init_portdesc();
-
-	if (!ret)
-		register_console(&cpm_scc_uart_console);
-	return ret;
+	register_console(&cpm_scc_uart_console);
+	return 0;
 }
 
 console_initcall(cpm_uart_console_init);
@@ -1165,44 +1255,129 @@ static struct uart_driver cpm_reg = {
 	.minor		= SERIAL_CPM_MINOR,
 	.cons		= CPM_UART_CONSOLE,
 };
-
-static int __init cpm_uart_init(void)
+static int cpm_uart_drv_probe(struct device *dev)
 {
-	int ret, i;
-
-	printk(KERN_INFO "Serial: CPM driver $Revision: 0.01 $\n");
+	struct platform_device  *pdev = to_platform_device(dev);
+	struct fs_uart_platform_info *pdata;
+	int ret = -ENODEV;
 
-#ifndef CONFIG_SERIAL_CPM_CONSOLE
-	ret = cpm_uart_init_portdesc();
-	if (ret)
+	if(!pdev) {
+		printk(KERN_ERR"CPM UART: platform data missing!\n");
 		return ret;
-#endif
+	}
 
-	cpm_reg.nr = cpm_uart_nr;
-	ret = uart_register_driver(&cpm_reg);
+	pdata = pdev->dev.platform_data;
+	pr_debug("cpm_uart_drv_probe: Adding CPM UART %d\n", cpm_uart_id2nr(pdata->fs_no));
 
-	if (ret)
+	if ((ret = cpm_uart_drv_get_platform_data(pdev, 0)))
 		return ret;
 
-	for (i = 0; i < cpm_uart_nr; i++) {
-		int con = cpm_uart_port_map[i];
-		cpm_uart_ports[con].port.line = i;
-		cpm_uart_ports[con].port.flags = UPF_BOOT_AUTOCONF;
-		uart_add_one_port(&cpm_reg, &cpm_uart_ports[con].port);
-	}
+	if (pdata->init_ioports)
+                pdata->init_ioports();
 
-	return ret;
+	ret = uart_add_one_port(&cpm_reg, &cpm_uart_ports[pdata->fs_no].port);
+
+        return ret;
 }
 
-static void __exit cpm_uart_exit(void)
+static int cpm_uart_drv_remove(struct device *dev)
+{
+	struct platform_device  *pdev = to_platform_device(dev);
+	struct fs_uart_platform_info *pdata = pdev->dev.platform_data;
+
+	pr_debug("cpm_uart_drv_remove: Removing CPM UART %d\n",
+			cpm_uart_id2nr(pdata->fs_no));
+
+        uart_remove_one_port(&cpm_reg, &cpm_uart_ports[pdata->fs_no].port);
+        return 0;
+}
+
+static struct device_driver cpm_smc_uart_driver = {
+        .name   = "fsl-cpm-smc:uart",
+        .bus    = &platform_bus_type,
+        .probe  = cpm_uart_drv_probe,
+        .remove = cpm_uart_drv_remove,
+};
+
+static struct device_driver cpm_scc_uart_driver = {
+        .name   = "fsl-cpm-scc:uart",
+        .bus    = &platform_bus_type,
+        .probe  = cpm_uart_drv_probe,
+        .remove = cpm_uart_drv_remove,
+};
+
+/*
+   This is supposed to match uart devices on platform bus,
+   */
+static int match_is_uart (struct device* dev, void* data)
 {
+	struct platform_device* pdev = container_of(dev, struct platform_device, dev);
+	int ret = 0;
+	/* this was setfunc as uart */
+	if(strstr(pdev->name,":uart")) {
+		ret = 1;
+	}
+	return ret;
+}
+
+
+static int cpm_uart_init(void) {
+
+	int ret;
 	int i;
+	struct device *dev;
+	printk(KERN_INFO "Serial: CPM driver $Revision: 0.02 $\n");
+
+	/* lookup the bus for uart devices */
+	dev = bus_find_device(&platform_bus_type, NULL, 0, match_is_uart);
+
+	/* There are devices on the bus - all should be OK  */
+	if (dev) {
+		cpm_uart_count();
+		cpm_reg.nr = cpm_uart_nr;
+
+		if (!(ret = uart_register_driver(&cpm_reg))) {
+			if ((ret = driver_register(&cpm_smc_uart_driver))) {
+				uart_unregister_driver(&cpm_reg);
+				return ret;
+			}
+			if ((ret = driver_register(&cpm_scc_uart_driver))) {
+				driver_unregister(&cpm_scc_uart_driver);
+				uart_unregister_driver(&cpm_reg);
+			}
+		}
+	} else {
+	/* No capable platform devices found - falling back to legacy mode */
+		pr_info("cpm_uart: WARNING: no UART devices found on platform bus!\n");
+		pr_info(
+		"cpm_uart: the driver will guess configuration, but this mode is no longer supported.\n");
+#ifndef CONFIG_SERIAL_CPM_CONSOLE
+		ret = cpm_uart_init_portdesc();
+		if (ret)
+			return ret;
+#endif
+
+		cpm_reg.nr = cpm_uart_nr;
+		ret = uart_register_driver(&cpm_reg);
+
+		if (ret)
+			return ret;
+
+		for (i = 0; i < cpm_uart_nr; i++) {
+			int con = cpm_uart_port_map[i];
+			cpm_uart_ports[con].port.line = i;
+			cpm_uart_ports[con].port.flags = UPF_BOOT_AUTOCONF;
+			uart_add_one_port(&cpm_reg, &cpm_uart_ports[con].port);
+		}
 
-	for (i = 0; i < cpm_uart_nr; i++) {
-		int con = cpm_uart_port_map[i];
-		uart_remove_one_port(&cpm_reg, &cpm_uart_ports[con].port);
 	}
+	return ret;
+}
 
+static void __exit cpm_uart_exit(void)
+{
+	driver_unregister(&cpm_scc_uart_driver);
+	driver_unregister(&cpm_smc_uart_driver);
 	uart_unregister_driver(&cpm_reg);
 }
 
diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm1.c b/drivers/serial/cpm_uart/cpm_uart_cpm1.c
index d789ee55cbb7..17406a05ce1f 100644
--- a/drivers/serial/cpm_uart/cpm_uart_cpm1.c
+++ b/drivers/serial/cpm_uart/cpm_uart_cpm1.c
@@ -8,6 +8,8 @@
  *
  *  Copyright (C) 2004 Freescale Semiconductor, Inc.
  *            (C) 2004 Intracom, S.A.
+ *            (C) 2006 MontaVista Software, Inc.
+ * 		Vitaly Bordug <vbordug@ru.mvista.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -81,58 +83,11 @@ void cpm_line_cr_cmd(int line, int cmd)
 
 void smc1_lineif(struct uart_cpm_port *pinfo)
 {
-	volatile cpm8xx_t *cp = cpmp;
-
-	(void)cp;	/* fix warning */
-#if defined (CONFIG_MPC885ADS)
-	/* Enable SMC1 transceivers */
-	{
-		cp->cp_pepar |= 0x000000c0;
-		cp->cp_pedir &= ~0x000000c0;
-		cp->cp_peso &= ~0x00000040;
-		cp->cp_peso |= 0x00000080;
-	}
-#elif defined (CONFIG_MPC86XADS)
-	unsigned int iobits = 0x000000c0;
-
-	if (!pinfo->is_portb) {
-		cp->cp_pbpar |= iobits;
-		cp->cp_pbdir &= ~iobits;
-		cp->cp_pbodr &= ~iobits;
-	} else {
-		((immap_t *)IMAP_ADDR)->im_ioport.iop_papar |= iobits;
-		((immap_t *)IMAP_ADDR)->im_ioport.iop_padir &= ~iobits;
-		((immap_t *)IMAP_ADDR)->im_ioport.iop_paodr &= ~iobits;
-	}
-#endif
 	pinfo->brg = 1;
 }
 
 void smc2_lineif(struct uart_cpm_port *pinfo)
 {
-	volatile cpm8xx_t *cp = cpmp;
-
-	(void)cp;	/* fix warning */
-#if defined (CONFIG_MPC885ADS)
-	cp->cp_pepar |= 0x00000c00;
-	cp->cp_pedir &= ~0x00000c00;
-	cp->cp_peso &= ~0x00000400;
-	cp->cp_peso |= 0x00000800;
-#elif defined (CONFIG_MPC86XADS)
-	unsigned int iobits = 0x00000c00;
-
-	if (!pinfo->is_portb) {
-		cp->cp_pbpar |= iobits;
-		cp->cp_pbdir &= ~iobits;
-		cp->cp_pbodr &= ~iobits;
-	} else {
-		((immap_t *)IMAP_ADDR)->im_ioport.iop_papar |= iobits;
-		((immap_t *)IMAP_ADDR)->im_ioport.iop_padir &= ~iobits;
-		((immap_t *)IMAP_ADDR)->im_ioport.iop_paodr &= ~iobits;
-	}
-
-#endif
-
 	pinfo->brg = 2;
 }
 
@@ -191,7 +146,7 @@ int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con)
 		/* was hostalloc but changed cause it blows away the */
 		/* large tlb mapping when pinning the kernel area    */
 		mem_addr = (u8 *) cpm_dpram_addr(cpm_dpalloc(memsz, 8));
-		dma_addr = 0;
+		dma_addr = (u32)mem_addr;
 	} else
 		mem_addr = dma_alloc_coherent(NULL, memsz, &dma_addr,
 					      GFP_KERNEL);
@@ -204,8 +159,9 @@ int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con)
 	}
 
 	pinfo->dp_addr = dp_offset;
-	pinfo->mem_addr = mem_addr;
-	pinfo->dma_addr = dma_addr;
+	pinfo->mem_addr = mem_addr;             /*  virtual address*/
+	pinfo->dma_addr = dma_addr;             /*  physical address*/
+	pinfo->mem_size = memsz;
 
 	pinfo->rx_buf = mem_addr;
 	pinfo->tx_buf = pinfo->rx_buf + L1_CACHE_ALIGN(pinfo->rx_nrfifos
diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm2.c b/drivers/serial/cpm_uart/cpm_uart_cpm2.c
index fd9e53ed3feb..cdba128250a9 100644
--- a/drivers/serial/cpm_uart/cpm_uart_cpm2.c
+++ b/drivers/serial/cpm_uart/cpm_uart_cpm2.c
@@ -8,6 +8,8 @@
  * 
  *  Copyright (C) 2004 Freescale Semiconductor, Inc.
  *            (C) 2004 Intracom, S.A.
+ *            (C) 2006 MontaVista Software, Inc.
+ * 		Vitaly Bordug <vbordug@ru.mvista.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -142,14 +144,6 @@ void scc2_lineif(struct uart_cpm_port *pinfo)
 	 * be supported in a sane fashion.
 	 */
 #ifndef CONFIG_STX_GP3
-#ifdef CONFIG_MPC8560_ADS
-	volatile iop_cpm2_t *io = &cpm2_immr->im_ioport;
-	io->iop_ppard |= 0x00000018;
-	io->iop_psord &= ~0x00000008;	/* Rx */
-	io->iop_psord &= ~0x00000010;	/* Tx */
-	io->iop_pdird &= ~0x00000008;	/* Rx */
-	io->iop_pdird |= 0x00000010;	/* Tx */
-#else
 	volatile iop_cpm2_t *io = &cpm2_immr->im_ioport;
 	io->iop_pparb |= 0x008b0000;
 	io->iop_pdirb |= 0x00880000;
@@ -157,7 +151,6 @@ void scc2_lineif(struct uart_cpm_port *pinfo)
 	io->iop_pdirb &= ~0x00030000;
 	io->iop_psorb &= ~0x00030000;
 #endif
-#endif
 	cpm2_immr->im_cpmux.cmx_scr &= 0xff00ffff;
 	cpm2_immr->im_cpmux.cmx_scr |= 0x00090000;
 	pinfo->brg = 2;
@@ -218,8 +211,10 @@ int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con)
 
 	memsz = L1_CACHE_ALIGN(pinfo->rx_nrfifos * pinfo->rx_fifosize) +
 	    L1_CACHE_ALIGN(pinfo->tx_nrfifos * pinfo->tx_fifosize);
-	if (is_con)
+	if (is_con) {
 		mem_addr = alloc_bootmem(memsz);
+		dma_addr = virt_to_bus(mem_addr);
+	}
 	else
 		mem_addr = dma_alloc_coherent(NULL, memsz, &dma_addr,
 					      GFP_KERNEL);
@@ -234,6 +229,7 @@ int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con)
 	pinfo->dp_addr = dp_offset;
 	pinfo->mem_addr = mem_addr;
 	pinfo->dma_addr = dma_addr;
+	pinfo->mem_size = memsz;
 
 	pinfo->rx_buf = mem_addr;
 	pinfo->tx_buf = pinfo->rx_buf + L1_CACHE_ALIGN(pinfo->rx_nrfifos
diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c
index c3b7a6673e9c..d202eb4f3848 100644
--- a/drivers/serial/imx.c
+++ b/drivers/serial/imx.c
@@ -45,6 +45,7 @@
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/hardware.h>
+#include <asm/arch/imx-uart.h>
 
 /* We've been assigned a range on the "Low-density serial ports" major */
 #define SERIAL_IMX_MAJOR	204
@@ -73,7 +74,8 @@ struct imx_port {
 	struct uart_port	port;
 	struct timer_list	timer;
 	unsigned int		old_status;
-	int txirq,rxirq,rtsirq;
+	int			txirq,rxirq,rtsirq;
+	int			have_rtscts:1;
 };
 
 /*
@@ -491,8 +493,12 @@ imx_set_termios(struct uart_port *port, struct termios *termios,
 		ucr2 = UCR2_SRST | UCR2_IRTS;
 
 	if (termios->c_cflag & CRTSCTS) {
-		ucr2 &= ~UCR2_IRTS;
-		ucr2 |= UCR2_CTSC;
+		if( sport->have_rtscts ) {
+			ucr2 &= ~UCR2_IRTS;
+			ucr2 |= UCR2_CTSC;
+		} else {
+			termios->c_cflag &= ~CRTSCTS;
+		}
 	}
 
 	if (termios->c_cflag & CSTOPB)
@@ -719,27 +725,6 @@ static void __init imx_init_ports(void)
 		imx_ports[i].timer.function = imx_timeout;
 		imx_ports[i].timer.data     = (unsigned long)&imx_ports[i];
 	}
-
-	imx_gpio_mode(PC9_PF_UART1_CTS);
-	imx_gpio_mode(PC10_PF_UART1_RTS);
-	imx_gpio_mode(PC11_PF_UART1_TXD);
-	imx_gpio_mode(PC12_PF_UART1_RXD);
-	imx_gpio_mode(PB28_PF_UART2_CTS);
-	imx_gpio_mode(PB29_PF_UART2_RTS);
-
-	imx_gpio_mode(PB30_PF_UART2_TXD);
-	imx_gpio_mode(PB31_PF_UART2_RXD);
-
-#if 0 /* We don't need these, on the mx1 the _modem_ side of the uart
-       * is implemented.
-       */
-	imx_gpio_mode(PD7_AF_UART2_DTR);
-	imx_gpio_mode(PD8_AF_UART2_DCD);
-	imx_gpio_mode(PD9_AF_UART2_RI);
-	imx_gpio_mode(PD10_AF_UART2_DSR);
-#endif
-
-
 }
 
 #ifdef CONFIG_SERIAL_IMX_CONSOLE
@@ -932,7 +917,14 @@ static int serial_imx_resume(struct platform_device *dev)
 
 static int serial_imx_probe(struct platform_device *dev)
 {
+	struct imxuart_platform_data *pdata;
+
 	imx_ports[dev->id].port.dev = &dev->dev;
+
+	pdata = (struct imxuart_platform_data *)dev->dev.platform_data;
+	if(pdata && (pdata->flags & IMXUART_HAVE_RTSCTS))
+		imx_ports[dev->id].have_rtscts = 1;
+
 	uart_add_one_port(&imx_reg, &imx_ports[dev->id].port);
 	platform_set_drvdata(dev, &imx_ports[dev->id]);
 	return 0;
diff --git a/drivers/serial/m32r_sio.c b/drivers/serial/m32r_sio.c
index e9c10c0a30fc..321a40f33b50 100644
--- a/drivers/serial/m32r_sio.c
+++ b/drivers/serial/m32r_sio.c
@@ -1057,7 +1057,6 @@ static void m32r_sio_console_write(struct console *co, const char *s,
 {
 	struct uart_sio_port *up = &m32r_sio_ports[co->index];
 	unsigned int ier;
-	int i;
 
 	/*
 	 *	First save the UER then disable the interrupts
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index fcd7744c4253..17839e753e4c 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -1500,20 +1500,18 @@ uart_block_til_ready(struct file *filp, struct uart_state *state)
 static struct uart_state *uart_get(struct uart_driver *drv, int line)
 {
 	struct uart_state *state;
+	int ret = 0;
 
-	mutex_lock(&port_mutex);
 	state = drv->state + line;
 	if (mutex_lock_interruptible(&state->mutex)) {
-		state = ERR_PTR(-ERESTARTSYS);
-		goto out;
+		ret = -ERESTARTSYS;
+		goto err;
 	}
 
 	state->count++;
-	if (!state->port) {
-		state->count--;
-		mutex_unlock(&state->mutex);
-		state = ERR_PTR(-ENXIO);
-		goto out;
+	if (!state->port || state->port->flags & UPF_DEAD) {
+		ret = -ENXIO;
+		goto err_unlock;
 	}
 
 	if (!state->info) {
@@ -1531,15 +1529,17 @@ static struct uart_state *uart_get(struct uart_driver *drv, int line)
 			tasklet_init(&state->info->tlet, uart_tasklet_action,
 				     (unsigned long)state);
 		} else {
-			state->count--;
-			mutex_unlock(&state->mutex);
-			state = ERR_PTR(-ENOMEM);
+			ret = -ENOMEM;
+			goto err_unlock;
 		}
 	}
-
- out:
-	mutex_unlock(&port_mutex);
 	return state;
+
+ err_unlock:
+	state->count--;
+	mutex_unlock(&state->mutex);
+ err:
+	return ERR_PTR(ret);
 }
 
 /*
@@ -1907,9 +1907,12 @@ uart_set_options(struct uart_port *port, struct console *co,
 static void uart_change_pm(struct uart_state *state, int pm_state)
 {
 	struct uart_port *port = state->port;
-	if (port->ops->pm)
-		port->ops->pm(port, pm_state, state->pm_state);
-	state->pm_state = pm_state;
+
+	if (state->pm_state != pm_state) {
+		if (port->ops->pm)
+			port->ops->pm(port, pm_state, state->pm_state);
+		state->pm_state = pm_state;
+	}
 }
 
 int uart_suspend_port(struct uart_driver *drv, struct uart_port *port)
@@ -2085,45 +2088,6 @@ uart_configure_port(struct uart_driver *drv, struct uart_state *state,
 	}
 }
 
-/*
- * This reverses the effects of uart_configure_port, hanging up the
- * port before removal.
- */
-static void
-uart_unconfigure_port(struct uart_driver *drv, struct uart_state *state)
-{
-	struct uart_port *port = state->port;
-	struct uart_info *info = state->info;
-
-	if (info && info->tty)
-		tty_vhangup(info->tty);
-
-	mutex_lock(&state->mutex);
-
-	state->info = NULL;
-
-	/*
-	 * Free the port IO and memory resources, if any.
-	 */
-	if (port->type != PORT_UNKNOWN)
-		port->ops->release_port(port);
-
-	/*
-	 * Indicate that there isn't a port here anymore.
-	 */
-	port->type = PORT_UNKNOWN;
-
-	/*
-	 * Kill the tasklet, and free resources.
-	 */
-	if (info) {
-		tasklet_kill(&info->tlet);
-		kfree(info);
-	}
-
-	mutex_unlock(&state->mutex);
-}
-
 static struct tty_operations uart_ops = {
 	.open		= uart_open,
 	.close		= uart_close,
@@ -2270,6 +2234,7 @@ int uart_add_one_port(struct uart_driver *drv, struct uart_port *port)
 	state = drv->state + port->line;
 
 	mutex_lock(&port_mutex);
+	mutex_lock(&state->mutex);
 	if (state->port) {
 		ret = -EINVAL;
 		goto out;
@@ -2304,7 +2269,13 @@ int uart_add_one_port(struct uart_driver *drv, struct uart_port *port)
 	    port->cons && !(port->cons->flags & CON_ENABLED))
 		register_console(port->cons);
 
+	/*
+	 * Ensure UPF_DEAD is not set.
+	 */
+	port->flags &= ~UPF_DEAD;
+
  out:
+	mutex_unlock(&state->mutex);
 	mutex_unlock(&port_mutex);
 
 	return ret;
@@ -2322,6 +2293,7 @@ int uart_add_one_port(struct uart_driver *drv, struct uart_port *port)
 int uart_remove_one_port(struct uart_driver *drv, struct uart_port *port)
 {
 	struct uart_state *state = drv->state + port->line;
+	struct uart_info *info;
 
 	BUG_ON(in_interrupt());
 
@@ -2332,11 +2304,48 @@ int uart_remove_one_port(struct uart_driver *drv, struct uart_port *port)
 	mutex_lock(&port_mutex);
 
 	/*
+	 * Mark the port "dead" - this prevents any opens from
+	 * succeeding while we shut down the port.
+	 */
+	mutex_lock(&state->mutex);
+	port->flags |= UPF_DEAD;
+	mutex_unlock(&state->mutex);
+
+	/*
 	 * Remove the devices from devfs
 	 */
 	tty_unregister_device(drv->tty_driver, port->line);
 
-	uart_unconfigure_port(drv, state);
+	info = state->info;
+	if (info && info->tty)
+		tty_vhangup(info->tty);
+
+	/*
+	 * All users of this port should now be disconnected from
+	 * this driver, and the port shut down.  We should be the
+	 * only thread fiddling with this port from now on.
+	 */
+	state->info = NULL;
+
+	/*
+	 * Free the port IO and memory resources, if any.
+	 */
+	if (port->type != PORT_UNKNOWN)
+		port->ops->release_port(port);
+
+	/*
+	 * Indicate that there isn't a port here anymore.
+	 */
+	port->type = PORT_UNKNOWN;
+
+	/*
+	 * Kill the tasklet, and free resources.
+	 */
+	if (info) {
+		tasklet_kill(&info->tlet);
+		kfree(info);
+	}
+
 	state->port = NULL;
 	mutex_unlock(&port_mutex);
 
diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c
index 1c4396c2962d..2b4f96541b8e 100644
--- a/drivers/serial/sunsu.c
+++ b/drivers/serial/sunsu.c
@@ -1730,3 +1730,4 @@ static void __exit sunsu_exit(void)
 
 module_init(sunsu_probe);
 module_exit(sunsu_exit);
+MODULE_LICENSE("GPL");
diff --git a/drivers/sn/ioc3.c b/drivers/sn/ioc3.c
index 0b49ff78efc1..501316b198e5 100644
--- a/drivers/sn/ioc3.c
+++ b/drivers/sn/ioc3.c
@@ -678,7 +678,7 @@ static int ioc3_probe(struct pci_dev *pdev, const struct pci_device_id *pci_id)
 	/* Track PCI-device specific data */
 	pci_set_drvdata(pdev, idd);
 	down_write(&ioc3_devices_rwsem);
-	list_add(&idd->list, &ioc3_devices);
+	list_add_tail(&idd->list, &ioc3_devices);
 	idd->id = ioc3_counter++;
 	up_write(&ioc3_devices_rwsem);
 
diff --git a/drivers/sn/ioc4.c b/drivers/sn/ioc4.c
index 67140a5804f5..cdeff909403e 100644
--- a/drivers/sn/ioc4.c
+++ b/drivers/sn/ioc4.c
@@ -310,7 +310,7 @@ ioc4_probe(struct pci_dev *pdev, const struct pci_device_id *pci_id)
 	pci_set_drvdata(idd->idd_pdev, idd);
 
 	mutex_lock(&ioc4_mutex);
-	list_add(&idd->idd_list, &ioc4_devices);
+	list_add_tail(&idd->idd_list, &ioc4_devices);
 
 	/* Add this IOC4 to all submodules */
 	list_for_each_entry(is, &ioc4_submodules, is_list) {
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 7a75faeb0526..23334c8bc4c7 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -75,11 +75,45 @@ config SPI_BUTTERFLY
 	  inexpensive battery powered microcontroller evaluation board.
 	  This same cable can be used to flash new firmware.
 
+config SPI_MPC83xx
+	tristate "Freescale MPC83xx SPI controller"
+	depends on SPI_MASTER && PPC_83xx && EXPERIMENTAL
+	select SPI_BITBANG
+	help
+	  This enables using the Freescale MPC83xx SPI controller in master
+	  mode.
+
+	  Note, this driver uniquely supports the SPI controller on the MPC83xx
+	  family of PowerPC processors.  The MPC83xx uses a simple set of shift
+	  registers for data (opposed to the CPM based descriptor model).
+
+config SPI_PXA2XX
+	tristate "PXA2xx SSP SPI master"
+	depends on SPI_MASTER && ARCH_PXA && EXPERIMENTAL
+	help
+	  This enables using a PXA2xx SSP port as a SPI master controller.
+	  The driver can be configured to use any SSP port and additional
+	  documentation can be found a Documentation/spi/pxa2xx.
+
+config SPI_S3C24XX_GPIO
+	tristate "Samsung S3C24XX series SPI by GPIO"
+	depends on SPI_MASTER && ARCH_S3C2410 && SPI_BITBANG && EXPERIMENTAL
+	help
+	  SPI driver for Samsung S3C24XX series ARM SoCs using
+	  GPIO lines to provide the SPI bus. This can be used where
+	  the inbuilt hardware cannot provide the transfer mode, or
+	  where the board is using non hardware connected pins.
 #
 # Add new SPI master controllers in alphabetical order above this line
 #
 
 
+config SPI_S3C24XX
+	tristate "Samsung S3C24XX series SPI"
+	depends on SPI_MASTER && ARCH_S3C2410 && EXPERIMENTAL
+	help
+	  SPI driver for Samsung S3C24XX series ARM SoCs
+
 #
 # There are lots of SPI device types, with sensors and memory
 # being probably the most widely used ones.
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index c2c87e845abf..8f4cb67997b3 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -13,6 +13,10 @@ obj-$(CONFIG_SPI_MASTER)		+= spi.o
 # SPI master controller drivers (bus)
 obj-$(CONFIG_SPI_BITBANG)		+= spi_bitbang.o
 obj-$(CONFIG_SPI_BUTTERFLY)		+= spi_butterfly.o
+obj-$(CONFIG_SPI_PXA2XX)		+= pxa2xx_spi.o
+obj-$(CONFIG_SPI_MPC83xx)		+= spi_mpc83xx.o
+obj-$(CONFIG_SPI_S3C24XX_GPIO)		+= spi_s3c24xx_gpio.o
+obj-$(CONFIG_SPI_S3C24XX)		+= spi_s3c24xx.o
 # 	... add above this line ...
 
 # SPI protocol drivers (device/link on bus)
diff --git a/drivers/spi/pxa2xx_spi.c b/drivers/spi/pxa2xx_spi.c
new file mode 100644
index 000000000000..29aec77f98be
--- /dev/null
+++ b/drivers/spi/pxa2xx_spi.c
@@ -0,0 +1,1486 @@
+/*
+ * Copyright (C) 2005 Stephen Street / StreetFire Sound Labs
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/ioport.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/spi/spi.h>
+#include <linux/workqueue.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/hardware.h>
+#include <asm/delay.h>
+#include <asm/dma.h>
+
+#include <asm/arch/hardware.h>
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx_spi.h>
+
+MODULE_AUTHOR("Stephen Street");
+MODULE_DESCRIPTION("PXA2xx SSP SPI Contoller");
+MODULE_LICENSE("GPL");
+
+#define MAX_BUSES 3
+
+#define DMA_INT_MASK (DCSR_ENDINTR | DCSR_STARTINTR | DCSR_BUSERR)
+#define RESET_DMA_CHANNEL (DCSR_NODESC | DMA_INT_MASK)
+#define IS_DMA_ALIGNED(x) (((u32)(x)&0x07)==0)
+
+#define DEFINE_SSP_REG(reg, off) \
+static inline u32 read_##reg(void *p) { return __raw_readl(p + (off)); } \
+static inline void write_##reg(u32 v, void *p) { __raw_writel(v, p + (off)); }
+
+DEFINE_SSP_REG(SSCR0, 0x00)
+DEFINE_SSP_REG(SSCR1, 0x04)
+DEFINE_SSP_REG(SSSR, 0x08)
+DEFINE_SSP_REG(SSITR, 0x0c)
+DEFINE_SSP_REG(SSDR, 0x10)
+DEFINE_SSP_REG(SSTO, 0x28)
+DEFINE_SSP_REG(SSPSP, 0x2c)
+
+#define START_STATE ((void*)0)
+#define RUNNING_STATE ((void*)1)
+#define DONE_STATE ((void*)2)
+#define ERROR_STATE ((void*)-1)
+
+#define QUEUE_RUNNING 0
+#define QUEUE_STOPPED 1
+
+struct driver_data {
+	/* Driver model hookup */
+	struct platform_device *pdev;
+
+	/* SPI framework hookup */
+	enum pxa_ssp_type ssp_type;
+	struct spi_master *master;
+
+	/* PXA hookup */
+	struct pxa2xx_spi_master *master_info;
+
+	/* DMA setup stuff */
+	int rx_channel;
+	int tx_channel;
+	u32 *null_dma_buf;
+
+	/* SSP register addresses */
+	void *ioaddr;
+	u32 ssdr_physical;
+
+	/* SSP masks*/
+	u32 dma_cr1;
+	u32 int_cr1;
+	u32 clear_sr;
+	u32 mask_sr;
+
+	/* Driver message queue */
+	struct workqueue_struct	*workqueue;
+	struct work_struct pump_messages;
+	spinlock_t lock;
+	struct list_head queue;
+	int busy;
+	int run;
+
+	/* Message Transfer pump */
+	struct tasklet_struct pump_transfers;
+
+	/* Current message transfer state info */
+	struct spi_message* cur_msg;
+	struct spi_transfer* cur_transfer;
+	struct chip_data *cur_chip;
+	size_t len;
+	void *tx;
+	void *tx_end;
+	void *rx;
+	void *rx_end;
+	int dma_mapped;
+	dma_addr_t rx_dma;
+	dma_addr_t tx_dma;
+	size_t rx_map_len;
+	size_t tx_map_len;
+	u8 n_bytes;
+	u32 dma_width;
+	int cs_change;
+	void (*write)(struct driver_data *drv_data);
+	void (*read)(struct driver_data *drv_data);
+	irqreturn_t (*transfer_handler)(struct driver_data *drv_data);
+	void (*cs_control)(u32 command);
+};
+
+struct chip_data {
+	u32 cr0;
+	u32 cr1;
+	u32 to;
+	u32 psp;
+	u32 timeout;
+	u8 n_bytes;
+	u32 dma_width;
+	u32 dma_burst_size;
+	u32 threshold;
+	u32 dma_threshold;
+	u8 enable_dma;
+	u8 bits_per_word;
+	u32 speed_hz;
+	void (*write)(struct driver_data *drv_data);
+	void (*read)(struct driver_data *drv_data);
+	void (*cs_control)(u32 command);
+};
+
+static void pump_messages(void *data);
+
+static int flush(struct driver_data *drv_data)
+{
+	unsigned long limit = loops_per_jiffy << 1;
+
+	void *reg = drv_data->ioaddr;
+
+	do {
+		while (read_SSSR(reg) & SSSR_RNE) {
+			read_SSDR(reg);
+		}
+	} while ((read_SSSR(reg) & SSSR_BSY) && limit--);
+	write_SSSR(SSSR_ROR, reg);
+
+	return limit;
+}
+
+static void restore_state(struct driver_data *drv_data)
+{
+	void *reg = drv_data->ioaddr;
+
+	/* Clear status and disable clock */
+	write_SSSR(drv_data->clear_sr, reg);
+	write_SSCR0(drv_data->cur_chip->cr0 & ~SSCR0_SSE, reg);
+
+	/* Load the registers */
+	write_SSCR1(drv_data->cur_chip->cr1, reg);
+	write_SSCR0(drv_data->cur_chip->cr0, reg);
+	if (drv_data->ssp_type != PXA25x_SSP) {
+		write_SSTO(0, reg);
+		write_SSPSP(drv_data->cur_chip->psp, reg);
+	}
+}
+
+static void null_cs_control(u32 command)
+{
+}
+
+static void null_writer(struct driver_data *drv_data)
+{
+	void *reg = drv_data->ioaddr;
+	u8 n_bytes = drv_data->n_bytes;
+
+	while ((read_SSSR(reg) & SSSR_TNF)
+			&& (drv_data->tx < drv_data->tx_end)) {
+		write_SSDR(0, reg);
+		drv_data->tx += n_bytes;
+	}
+}
+
+static void null_reader(struct driver_data *drv_data)
+{
+	void *reg = drv_data->ioaddr;
+	u8 n_bytes = drv_data->n_bytes;
+
+	while ((read_SSSR(reg) & SSSR_RNE)
+			&& (drv_data->rx < drv_data->rx_end)) {
+		read_SSDR(reg);
+		drv_data->rx += n_bytes;
+	}
+}
+
+static void u8_writer(struct driver_data *drv_data)
+{
+	void *reg = drv_data->ioaddr;
+
+	while ((read_SSSR(reg) & SSSR_TNF)
+			&& (drv_data->tx < drv_data->tx_end)) {
+		write_SSDR(*(u8 *)(drv_data->tx), reg);
+		++drv_data->tx;
+	}
+}
+
+static void u8_reader(struct driver_data *drv_data)
+{
+	void *reg = drv_data->ioaddr;
+
+	while ((read_SSSR(reg) & SSSR_RNE)
+			&& (drv_data->rx < drv_data->rx_end)) {
+		*(u8 *)(drv_data->rx) = read_SSDR(reg);
+		++drv_data->rx;
+	}
+}
+
+static void u16_writer(struct driver_data *drv_data)
+{
+	void *reg = drv_data->ioaddr;
+
+	while ((read_SSSR(reg) & SSSR_TNF)
+			&& (drv_data->tx < drv_data->tx_end)) {
+		write_SSDR(*(u16 *)(drv_data->tx), reg);
+		drv_data->tx += 2;
+	}
+}
+
+static void u16_reader(struct driver_data *drv_data)
+{
+	void *reg = drv_data->ioaddr;
+
+	while ((read_SSSR(reg) & SSSR_RNE)
+			&& (drv_data->rx < drv_data->rx_end)) {
+		*(u16 *)(drv_data->rx) = read_SSDR(reg);
+		drv_data->rx += 2;
+	}
+}
+static void u32_writer(struct driver_data *drv_data)
+{
+	void *reg = drv_data->ioaddr;
+
+	while ((read_SSSR(reg) & SSSR_TNF)
+			&& (drv_data->tx < drv_data->tx_end)) {
+		write_SSDR(*(u32 *)(drv_data->tx), reg);
+		drv_data->tx += 4;
+	}
+}
+
+static void u32_reader(struct driver_data *drv_data)
+{
+	void *reg = drv_data->ioaddr;
+
+	while ((read_SSSR(reg) & SSSR_RNE)
+			&& (drv_data->rx < drv_data->rx_end)) {
+		*(u32 *)(drv_data->rx) = read_SSDR(reg);
+		drv_data->rx += 4;
+	}
+}
+
+static void *next_transfer(struct driver_data *drv_data)
+{
+	struct spi_message *msg = drv_data->cur_msg;
+	struct spi_transfer *trans = drv_data->cur_transfer;
+
+	/* Move to next transfer */
+	if (trans->transfer_list.next != &msg->transfers) {
+		drv_data->cur_transfer =
+			list_entry(trans->transfer_list.next,
+					struct spi_transfer,
+					transfer_list);
+		return RUNNING_STATE;
+	} else
+		return DONE_STATE;
+}
+
+static int map_dma_buffers(struct driver_data *drv_data)
+{
+	struct spi_message *msg = drv_data->cur_msg;
+	struct device *dev = &msg->spi->dev;
+
+	if (!drv_data->cur_chip->enable_dma)
+		return 0;
+
+	if (msg->is_dma_mapped)
+		return  drv_data->rx_dma && drv_data->tx_dma;
+
+	if (!IS_DMA_ALIGNED(drv_data->rx) || !IS_DMA_ALIGNED(drv_data->tx))
+		return 0;
+
+	/* Modify setup if rx buffer is null */
+	if (drv_data->rx == NULL) {
+		*drv_data->null_dma_buf = 0;
+		drv_data->rx = drv_data->null_dma_buf;
+		drv_data->rx_map_len = 4;
+	} else
+		drv_data->rx_map_len = drv_data->len;
+
+
+	/* Modify setup if tx buffer is null */
+	if (drv_data->tx == NULL) {
+		*drv_data->null_dma_buf = 0;
+		drv_data->tx = drv_data->null_dma_buf;
+		drv_data->tx_map_len = 4;
+	} else
+		drv_data->tx_map_len = drv_data->len;
+
+	/* Stream map the rx buffer */
+	drv_data->rx_dma = dma_map_single(dev, drv_data->rx,
+						drv_data->rx_map_len,
+						DMA_FROM_DEVICE);
+	if (dma_mapping_error(drv_data->rx_dma))
+		return 0;
+
+	/* Stream map the tx buffer */
+	drv_data->tx_dma = dma_map_single(dev, drv_data->tx,
+						drv_data->tx_map_len,
+						DMA_TO_DEVICE);
+
+	if (dma_mapping_error(drv_data->tx_dma)) {
+		dma_unmap_single(dev, drv_data->rx_dma,
+					drv_data->rx_map_len, DMA_FROM_DEVICE);
+		return 0;
+	}
+
+	return 1;
+}
+
+static void unmap_dma_buffers(struct driver_data *drv_data)
+{
+	struct device *dev;
+
+	if (!drv_data->dma_mapped)
+		return;
+
+	if (!drv_data->cur_msg->is_dma_mapped) {
+		dev = &drv_data->cur_msg->spi->dev;
+		dma_unmap_single(dev, drv_data->rx_dma,
+					drv_data->rx_map_len, DMA_FROM_DEVICE);
+		dma_unmap_single(dev, drv_data->tx_dma,
+					drv_data->tx_map_len, DMA_TO_DEVICE);
+	}
+
+	drv_data->dma_mapped = 0;
+}
+
+/* caller already set message->status; dma and pio irqs are blocked */
+static void giveback(struct driver_data *drv_data)
+{
+	struct spi_transfer* last_transfer;
+	unsigned long flags;
+	struct spi_message *msg;
+
+	spin_lock_irqsave(&drv_data->lock, flags);
+	msg = drv_data->cur_msg;
+	drv_data->cur_msg = NULL;
+	drv_data->cur_transfer = NULL;
+	drv_data->cur_chip = NULL;
+	queue_work(drv_data->workqueue, &drv_data->pump_messages);
+	spin_unlock_irqrestore(&drv_data->lock, flags);
+
+	last_transfer = list_entry(msg->transfers.prev,
+					struct spi_transfer,
+					transfer_list);
+
+	if (!last_transfer->cs_change)
+		drv_data->cs_control(PXA2XX_CS_DEASSERT);
+
+	msg->state = NULL;
+	if (msg->complete)
+		msg->complete(msg->context);
+}
+
+static int wait_ssp_rx_stall(void *ioaddr)
+{
+	unsigned long limit = loops_per_jiffy << 1;
+
+	while ((read_SSSR(ioaddr) & SSSR_BSY) && limit--)
+		cpu_relax();
+
+	return limit;
+}
+
+static int wait_dma_channel_stop(int channel)
+{
+	unsigned long limit = loops_per_jiffy << 1;
+
+	while (!(DCSR(channel) & DCSR_STOPSTATE) && limit--)
+		cpu_relax();
+
+	return limit;
+}
+
+static void dma_handler(int channel, void *data, struct pt_regs *regs)
+{
+	struct driver_data *drv_data = data;
+	struct spi_message *msg = drv_data->cur_msg;
+	void *reg = drv_data->ioaddr;
+	u32 irq_status = DCSR(channel) & DMA_INT_MASK;
+	u32 trailing_sssr = 0;
+
+	if (irq_status & DCSR_BUSERR) {
+
+		/* Disable interrupts, clear status and reset DMA */
+		write_SSCR0(read_SSCR0(reg) & ~SSCR0_SSE, reg);
+		write_SSCR1(read_SSCR1(reg) & ~drv_data->dma_cr1, reg);
+		if (drv_data->ssp_type != PXA25x_SSP)
+			write_SSTO(0, reg);
+		write_SSSR(drv_data->clear_sr, reg);
+		DCSR(drv_data->rx_channel) = RESET_DMA_CHANNEL;
+		DCSR(drv_data->tx_channel) = RESET_DMA_CHANNEL;
+
+		if (flush(drv_data) == 0)
+			dev_err(&drv_data->pdev->dev,
+					"dma_handler: flush fail\n");
+
+		unmap_dma_buffers(drv_data);
+
+		if (channel == drv_data->tx_channel)
+			dev_err(&drv_data->pdev->dev,
+				"dma_handler: bad bus address on "
+				"tx channel %d, source %x target = %x\n",
+				channel, DSADR(channel), DTADR(channel));
+		else
+			dev_err(&drv_data->pdev->dev,
+				"dma_handler: bad bus address on "
+				"rx channel %d, source %x target = %x\n",
+				channel, DSADR(channel), DTADR(channel));
+
+		msg->state = ERROR_STATE;
+		tasklet_schedule(&drv_data->pump_transfers);
+	}
+
+	/* PXA255x_SSP has no timeout interrupt, wait for tailing bytes */
+	if ((drv_data->ssp_type == PXA25x_SSP)
+		&& (channel == drv_data->tx_channel)
+		&& (irq_status & DCSR_ENDINTR)) {
+
+		/* Wait for rx to stall */
+		if (wait_ssp_rx_stall(drv_data->ioaddr) == 0)
+			dev_err(&drv_data->pdev->dev,
+				"dma_handler: ssp rx stall failed\n");
+
+		/* Clear and disable interrupts on SSP and DMA channels*/
+		write_SSCR1(read_SSCR1(reg) & ~drv_data->dma_cr1, reg);
+		write_SSSR(drv_data->clear_sr, reg);
+		DCSR(drv_data->tx_channel) = RESET_DMA_CHANNEL;
+		DCSR(drv_data->rx_channel) = RESET_DMA_CHANNEL;
+		if (wait_dma_channel_stop(drv_data->rx_channel) == 0)
+			dev_err(&drv_data->pdev->dev,
+				"dma_handler: dma rx channel stop failed\n");
+
+		unmap_dma_buffers(drv_data);
+
+		/* Read trailing bytes */
+		/* Calculate number of trailing bytes, read them */
+		trailing_sssr = read_SSSR(reg);
+		if ((trailing_sssr & 0xf008) != 0xf000) {
+			drv_data->rx = drv_data->rx_end -
+					(((trailing_sssr >> 12) & 0x0f) + 1);
+			drv_data->read(drv_data);
+		}
+		msg->actual_length += drv_data->len;
+
+		/* Release chip select if requested, transfer delays are
+		 * handled in pump_transfers */
+		if (drv_data->cs_change)
+			drv_data->cs_control(PXA2XX_CS_DEASSERT);
+
+		/* Move to next transfer */
+		msg->state = next_transfer(drv_data);
+
+		/* Schedule transfer tasklet */
+		tasklet_schedule(&drv_data->pump_transfers);
+	}
+}
+
+static irqreturn_t dma_transfer(struct driver_data *drv_data)
+{
+	u32 irq_status;
+	u32 trailing_sssr = 0;
+	struct spi_message *msg = drv_data->cur_msg;
+	void *reg = drv_data->ioaddr;
+
+	irq_status = read_SSSR(reg) & drv_data->mask_sr;
+	if (irq_status & SSSR_ROR) {
+		/* Clear and disable interrupts on SSP and DMA channels*/
+		write_SSCR0(read_SSCR0(reg) & ~SSCR0_SSE, reg);
+		write_SSCR1(read_SSCR1(reg) & ~drv_data->dma_cr1, reg);
+		if (drv_data->ssp_type != PXA25x_SSP)
+			write_SSTO(0, reg);
+		write_SSSR(drv_data->clear_sr, reg);
+		DCSR(drv_data->tx_channel) = RESET_DMA_CHANNEL;
+		DCSR(drv_data->rx_channel) = RESET_DMA_CHANNEL;
+		unmap_dma_buffers(drv_data);
+
+		if (flush(drv_data) == 0)
+			dev_err(&drv_data->pdev->dev,
+					"dma_transfer: flush fail\n");
+
+		dev_warn(&drv_data->pdev->dev, "dma_transfer: fifo overun\n");
+
+		drv_data->cur_msg->state = ERROR_STATE;
+		tasklet_schedule(&drv_data->pump_transfers);
+
+		return IRQ_HANDLED;
+	}
+
+	/* Check for false positive timeout */
+	if ((irq_status & SSSR_TINT) && DCSR(drv_data->tx_channel) & DCSR_RUN) {
+		write_SSSR(SSSR_TINT, reg);
+		return IRQ_HANDLED;
+	}
+
+	if (irq_status & SSSR_TINT || drv_data->rx == drv_data->rx_end) {
+
+		/* Clear and disable interrupts on SSP and DMA channels*/
+		write_SSCR1(read_SSCR1(reg) & ~drv_data->dma_cr1, reg);
+		if (drv_data->ssp_type != PXA25x_SSP)
+			write_SSTO(0, reg);
+		write_SSSR(drv_data->clear_sr, reg);
+		DCSR(drv_data->tx_channel) = RESET_DMA_CHANNEL;
+		DCSR(drv_data->rx_channel) = RESET_DMA_CHANNEL;
+
+		if (wait_dma_channel_stop(drv_data->rx_channel) == 0)
+			dev_err(&drv_data->pdev->dev,
+				"dma_transfer: dma rx channel stop failed\n");
+
+		if (wait_ssp_rx_stall(drv_data->ioaddr) == 0)
+			dev_err(&drv_data->pdev->dev,
+				"dma_transfer: ssp rx stall failed\n");
+
+		unmap_dma_buffers(drv_data);
+
+		/* Calculate number of trailing bytes, read them */
+		trailing_sssr = read_SSSR(reg);
+		if ((trailing_sssr & 0xf008) != 0xf000) {
+			drv_data->rx = drv_data->rx_end -
+					(((trailing_sssr >> 12) & 0x0f) + 1);
+			drv_data->read(drv_data);
+		}
+		msg->actual_length += drv_data->len;
+
+		/* Release chip select if requested, transfer delays are
+		 * handled in pump_transfers */
+		if (drv_data->cs_change)
+			drv_data->cs_control(PXA2XX_CS_DEASSERT);
+
+		/* Move to next transfer */
+		msg->state = next_transfer(drv_data);
+
+		/* Schedule transfer tasklet */
+		tasklet_schedule(&drv_data->pump_transfers);
+
+		return IRQ_HANDLED;
+	}
+
+	/* Opps problem detected */
+	return IRQ_NONE;
+}
+
+static irqreturn_t interrupt_transfer(struct driver_data *drv_data)
+{
+	struct spi_message *msg = drv_data->cur_msg;
+	void *reg = drv_data->ioaddr;
+	unsigned long limit = loops_per_jiffy << 1;
+	u32 irq_status;
+	u32 irq_mask = (read_SSCR1(reg) & SSCR1_TIE) ?
+			drv_data->mask_sr : drv_data->mask_sr & ~SSSR_TFS;
+
+	while ((irq_status = read_SSSR(reg) & irq_mask)) {
+
+		if (irq_status & SSSR_ROR) {
+
+			/* Clear and disable interrupts */
+			write_SSCR0(read_SSCR0(reg) & ~SSCR0_SSE, reg);
+			write_SSCR1(read_SSCR1(reg) & ~drv_data->int_cr1, reg);
+			if (drv_data->ssp_type != PXA25x_SSP)
+				write_SSTO(0, reg);
+			write_SSSR(drv_data->clear_sr, reg);
+
+			if (flush(drv_data) == 0)
+				dev_err(&drv_data->pdev->dev,
+					"interrupt_transfer: flush fail\n");
+
+			/* Stop the SSP */
+
+			dev_warn(&drv_data->pdev->dev,
+					"interrupt_transfer: fifo overun\n");
+
+			msg->state = ERROR_STATE;
+			tasklet_schedule(&drv_data->pump_transfers);
+
+			return IRQ_HANDLED;
+		}
+
+		/* Look for false positive timeout */
+		if ((irq_status & SSSR_TINT)
+				&& (drv_data->rx < drv_data->rx_end))
+			write_SSSR(SSSR_TINT, reg);
+
+		/* Pump data */
+		drv_data->read(drv_data);
+		drv_data->write(drv_data);
+
+		if (drv_data->tx == drv_data->tx_end) {
+			/* Disable tx interrupt */
+			write_SSCR1(read_SSCR1(reg) & ~SSCR1_TIE, reg);
+			irq_mask = drv_data->mask_sr & ~SSSR_TFS;
+
+			/* PXA25x_SSP has no timeout, read trailing bytes */
+			if (drv_data->ssp_type == PXA25x_SSP) {
+				while ((read_SSSR(reg) & SSSR_BSY) && limit--)
+					drv_data->read(drv_data);
+
+				if (limit == 0)
+					dev_err(&drv_data->pdev->dev,
+						"interrupt_transfer: "
+						"trailing byte read failed\n");
+			}
+		}
+
+		if ((irq_status & SSSR_TINT)
+				|| (drv_data->rx == drv_data->rx_end)) {
+
+			/* Clear timeout */
+			write_SSCR1(read_SSCR1(reg) & ~drv_data->int_cr1, reg);
+			if (drv_data->ssp_type != PXA25x_SSP)
+				write_SSTO(0, reg);
+			write_SSSR(drv_data->clear_sr, reg);
+
+			/* Update total byte transfered */
+			msg->actual_length += drv_data->len;
+
+			/* Release chip select if requested, transfer delays are
+			 * handled in pump_transfers */
+			if (drv_data->cs_change)
+				drv_data->cs_control(PXA2XX_CS_DEASSERT);
+
+			/* Move to next transfer */
+			msg->state = next_transfer(drv_data);
+
+			/* Schedule transfer tasklet */
+			tasklet_schedule(&drv_data->pump_transfers);
+		}
+	}
+
+	/* We did something */
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t ssp_int(int irq, void *dev_id, struct pt_regs *regs)
+{
+	struct driver_data *drv_data = (struct driver_data *)dev_id;
+	void *reg = drv_data->ioaddr;
+
+	if (!drv_data->cur_msg) {
+
+		write_SSCR0(read_SSCR0(reg) & ~SSCR0_SSE, reg);
+		write_SSCR1(read_SSCR1(reg) & ~drv_data->int_cr1, reg);
+		if (drv_data->ssp_type != PXA25x_SSP)
+			write_SSTO(0, reg);
+		write_SSSR(drv_data->clear_sr, reg);
+
+		dev_err(&drv_data->pdev->dev, "bad message state "
+				"in interrupt handler");
+
+		/* Never fail */
+		return IRQ_HANDLED;
+	}
+
+	return drv_data->transfer_handler(drv_data);
+}
+
+static void pump_transfers(unsigned long data)
+{
+	struct driver_data *drv_data = (struct driver_data *)data;
+	struct spi_message *message = NULL;
+	struct spi_transfer *transfer = NULL;
+	struct spi_transfer *previous = NULL;
+	struct chip_data *chip = NULL;
+	void *reg = drv_data->ioaddr;
+	u32 clk_div = 0;
+	u8 bits = 0;
+	u32 speed = 0;
+	u32 cr0;
+
+	/* Get current state information */
+	message = drv_data->cur_msg;
+	transfer = drv_data->cur_transfer;
+	chip = drv_data->cur_chip;
+
+	/* Handle for abort */
+	if (message->state == ERROR_STATE) {
+		message->status = -EIO;
+		giveback(drv_data);
+		return;
+	}
+
+	/* Handle end of message */
+	if (message->state == DONE_STATE) {
+		message->status = 0;
+		giveback(drv_data);
+		return;
+	}
+
+	/* Delay if requested at end of transfer*/
+	if (message->state == RUNNING_STATE) {
+		previous = list_entry(transfer->transfer_list.prev,
+					struct spi_transfer,
+					transfer_list);
+		if (previous->delay_usecs)
+			udelay(previous->delay_usecs);
+	}
+
+	/* Setup the transfer state based on the type of transfer */
+	if (flush(drv_data) == 0) {
+		dev_err(&drv_data->pdev->dev, "pump_transfers: flush failed\n");
+		message->status = -EIO;
+		giveback(drv_data);
+		return;
+	}
+	drv_data->n_bytes = chip->n_bytes;
+	drv_data->dma_width = chip->dma_width;
+	drv_data->cs_control = chip->cs_control;
+	drv_data->tx = (void *)transfer->tx_buf;
+	drv_data->tx_end = drv_data->tx + transfer->len;
+	drv_data->rx = transfer->rx_buf;
+	drv_data->rx_end = drv_data->rx + transfer->len;
+	drv_data->rx_dma = transfer->rx_dma;
+	drv_data->tx_dma = transfer->tx_dma;
+	drv_data->len = transfer->len;
+	drv_data->write = drv_data->tx ? chip->write : null_writer;
+	drv_data->read = drv_data->rx ? chip->read : null_reader;
+	drv_data->cs_change = transfer->cs_change;
+
+	/* Change speed and bit per word on a per transfer */
+	if (transfer->speed_hz || transfer->bits_per_word) {
+
+		/* Disable clock */
+		write_SSCR0(chip->cr0 & ~SSCR0_SSE, reg);
+		cr0 = chip->cr0;
+		bits = chip->bits_per_word;
+		speed = chip->speed_hz;
+
+		if (transfer->speed_hz)
+			speed = transfer->speed_hz;
+
+		if (transfer->bits_per_word)
+			bits = transfer->bits_per_word;
+
+		if (reg == SSP1_VIRT)
+			clk_div = SSP1_SerClkDiv(speed);
+		else if (reg == SSP2_VIRT)
+			clk_div = SSP2_SerClkDiv(speed);
+		else if (reg == SSP3_VIRT)
+			clk_div = SSP3_SerClkDiv(speed);
+
+		if (bits <= 8) {
+			drv_data->n_bytes = 1;
+			drv_data->dma_width = DCMD_WIDTH1;
+			drv_data->read = drv_data->read != null_reader ?
+						u8_reader : null_reader;
+			drv_data->write = drv_data->write != null_writer ?
+						u8_writer : null_writer;
+		} else if (bits <= 16) {
+			drv_data->n_bytes = 2;
+			drv_data->dma_width = DCMD_WIDTH2;
+			drv_data->read = drv_data->read != null_reader ?
+						u16_reader : null_reader;
+			drv_data->write = drv_data->write != null_writer ?
+						u16_writer : null_writer;
+		} else if (bits <= 32) {
+			drv_data->n_bytes = 4;
+			drv_data->dma_width = DCMD_WIDTH4;
+			drv_data->read = drv_data->read != null_reader ?
+						u32_reader : null_reader;
+			drv_data->write = drv_data->write != null_writer ?
+						u32_writer : null_writer;
+		}
+
+		cr0 = clk_div
+			| SSCR0_Motorola
+			| SSCR0_DataSize(bits > 16 ? bits - 16 : bits)
+			| SSCR0_SSE
+			| (bits > 16 ? SSCR0_EDSS : 0);
+
+		/* Start it back up */
+		write_SSCR0(cr0, reg);
+	}
+
+	message->state = RUNNING_STATE;
+
+	/* Try to map dma buffer and do a dma transfer if successful */
+	if ((drv_data->dma_mapped = map_dma_buffers(drv_data))) {
+
+		/* Ensure we have the correct interrupt handler */
+		drv_data->transfer_handler = dma_transfer;
+
+		/* Setup rx DMA Channel */
+		DCSR(drv_data->rx_channel) = RESET_DMA_CHANNEL;
+		DSADR(drv_data->rx_channel) = drv_data->ssdr_physical;
+		DTADR(drv_data->rx_channel) = drv_data->rx_dma;
+		if (drv_data->rx == drv_data->null_dma_buf)
+			/* No target address increment */
+			DCMD(drv_data->rx_channel) = DCMD_FLOWSRC
+							| drv_data->dma_width
+							| chip->dma_burst_size
+							| drv_data->len;
+		else
+			DCMD(drv_data->rx_channel) = DCMD_INCTRGADDR
+							| DCMD_FLOWSRC
+							| drv_data->dma_width
+							| chip->dma_burst_size
+							| drv_data->len;
+
+		/* Setup tx DMA Channel */
+		DCSR(drv_data->tx_channel) = RESET_DMA_CHANNEL;
+		DSADR(drv_data->tx_channel) = drv_data->tx_dma;
+		DTADR(drv_data->tx_channel) = drv_data->ssdr_physical;
+		if (drv_data->tx == drv_data->null_dma_buf)
+			/* No source address increment */
+			DCMD(drv_data->tx_channel) = DCMD_FLOWTRG
+							| drv_data->dma_width
+							| chip->dma_burst_size
+							| drv_data->len;
+		else
+			DCMD(drv_data->tx_channel) = DCMD_INCSRCADDR
+							| DCMD_FLOWTRG
+							| drv_data->dma_width
+							| chip->dma_burst_size
+							| drv_data->len;
+
+		/* Enable dma end irqs on SSP to detect end of transfer */
+		if (drv_data->ssp_type == PXA25x_SSP)
+			DCMD(drv_data->tx_channel) |= DCMD_ENDIRQEN;
+
+		/* Fix me, need to handle cs polarity */
+		drv_data->cs_control(PXA2XX_CS_ASSERT);
+
+		/* Go baby, go */
+		write_SSSR(drv_data->clear_sr, reg);
+		DCSR(drv_data->rx_channel) |= DCSR_RUN;
+		DCSR(drv_data->tx_channel) |= DCSR_RUN;
+		if (drv_data->ssp_type != PXA25x_SSP)
+			write_SSTO(chip->timeout, reg);
+		write_SSCR1(chip->cr1
+				| chip->dma_threshold
+				| drv_data->dma_cr1,
+				reg);
+	} else {
+		/* Ensure we have the correct interrupt handler	*/
+		drv_data->transfer_handler = interrupt_transfer;
+
+		/* Fix me, need to handle cs polarity */
+		drv_data->cs_control(PXA2XX_CS_ASSERT);
+
+		/* Go baby, go */
+		write_SSSR(drv_data->clear_sr, reg);
+		if (drv_data->ssp_type != PXA25x_SSP)
+			write_SSTO(chip->timeout, reg);
+		write_SSCR1(chip->cr1
+				| chip->threshold
+				| drv_data->int_cr1,
+				reg);
+	}
+}
+
+static void pump_messages(void *data)
+{
+	struct driver_data *drv_data = data;
+	unsigned long flags;
+
+	/* Lock queue and check for queue work */
+	spin_lock_irqsave(&drv_data->lock, flags);
+	if (list_empty(&drv_data->queue) || drv_data->run == QUEUE_STOPPED) {
+		drv_data->busy = 0;
+		spin_unlock_irqrestore(&drv_data->lock, flags);
+		return;
+	}
+
+	/* Make sure we are not already running a message */
+	if (drv_data->cur_msg) {
+		spin_unlock_irqrestore(&drv_data->lock, flags);
+		return;
+	}
+
+	/* Extract head of queue */
+	drv_data->cur_msg = list_entry(drv_data->queue.next,
+					struct spi_message, queue);
+	list_del_init(&drv_data->cur_msg->queue);
+
+	/* Initial message state*/
+	drv_data->cur_msg->state = START_STATE;
+	drv_data->cur_transfer = list_entry(drv_data->cur_msg->transfers.next,
+						struct spi_transfer,
+						transfer_list);
+
+	/* Setup the SSP using the per chip configuration */
+	drv_data->cur_chip = spi_get_ctldata(drv_data->cur_msg->spi);
+	restore_state(drv_data);
+
+	/* Mark as busy and launch transfers */
+	tasklet_schedule(&drv_data->pump_transfers);
+
+	drv_data->busy = 1;
+	spin_unlock_irqrestore(&drv_data->lock, flags);
+}
+
+static int transfer(struct spi_device *spi, struct spi_message *msg)
+{
+	struct driver_data *drv_data = spi_master_get_devdata(spi->master);
+	unsigned long flags;
+
+	spin_lock_irqsave(&drv_data->lock, flags);
+
+	if (drv_data->run == QUEUE_STOPPED) {
+		spin_unlock_irqrestore(&drv_data->lock, flags);
+		return -ESHUTDOWN;
+	}
+
+	msg->actual_length = 0;
+	msg->status = -EINPROGRESS;
+	msg->state = START_STATE;
+
+	list_add_tail(&msg->queue, &drv_data->queue);
+
+	if (drv_data->run == QUEUE_RUNNING && !drv_data->busy)
+		queue_work(drv_data->workqueue, &drv_data->pump_messages);
+
+	spin_unlock_irqrestore(&drv_data->lock, flags);
+
+	return 0;
+}
+
+static int setup(struct spi_device *spi)
+{
+	struct pxa2xx_spi_chip *chip_info = NULL;
+	struct chip_data *chip;
+	struct driver_data *drv_data = spi_master_get_devdata(spi->master);
+	unsigned int clk_div;
+
+	if (!spi->bits_per_word)
+		spi->bits_per_word = 8;
+
+	if (drv_data->ssp_type != PXA25x_SSP
+			&& (spi->bits_per_word < 4 || spi->bits_per_word > 32))
+		return -EINVAL;
+	else if (spi->bits_per_word < 4 || spi->bits_per_word > 16)
+		return -EINVAL;
+
+	/* Only alloc (or use chip_info) on first setup */
+	chip = spi_get_ctldata(spi);
+	if (chip == NULL) {
+		chip = kzalloc(sizeof(struct chip_data), GFP_KERNEL);
+		if (!chip)
+			return -ENOMEM;
+
+		chip->cs_control = null_cs_control;
+		chip->enable_dma = 0;
+		chip->timeout = SSP_TIMEOUT(1000);
+		chip->threshold = SSCR1_RxTresh(1) | SSCR1_TxTresh(1);
+		chip->dma_burst_size = drv_data->master_info->enable_dma ?
+					DCMD_BURST8 : 0;
+
+		chip_info = spi->controller_data;
+	}
+
+	/* chip_info isn't always needed */
+	if (chip_info) {
+		if (chip_info->cs_control)
+			chip->cs_control = chip_info->cs_control;
+
+		chip->timeout = SSP_TIMEOUT(chip_info->timeout_microsecs);
+
+		chip->threshold = SSCR1_RxTresh(chip_info->rx_threshold)
+					| SSCR1_TxTresh(chip_info->tx_threshold);
+
+		chip->enable_dma = chip_info->dma_burst_size != 0
+					&& drv_data->master_info->enable_dma;
+		chip->dma_threshold = 0;
+
+		if (chip->enable_dma) {
+			if (chip_info->dma_burst_size <= 8) {
+				chip->dma_threshold = SSCR1_RxTresh(8)
+							| SSCR1_TxTresh(8);
+				chip->dma_burst_size = DCMD_BURST8;
+			} else if (chip_info->dma_burst_size <= 16) {
+				chip->dma_threshold = SSCR1_RxTresh(16)
+							| SSCR1_TxTresh(16);
+				chip->dma_burst_size = DCMD_BURST16;
+			} else {
+				chip->dma_threshold = SSCR1_RxTresh(32)
+							| SSCR1_TxTresh(32);
+				chip->dma_burst_size = DCMD_BURST32;
+			}
+		}
+
+
+		if (chip_info->enable_loopback)
+			chip->cr1 = SSCR1_LBM;
+	}
+
+	if (drv_data->ioaddr == SSP1_VIRT)
+		clk_div = SSP1_SerClkDiv(spi->max_speed_hz);
+	else if (drv_data->ioaddr == SSP2_VIRT)
+		clk_div = SSP2_SerClkDiv(spi->max_speed_hz);
+	else if (drv_data->ioaddr == SSP3_VIRT)
+		clk_div = SSP3_SerClkDiv(spi->max_speed_hz);
+	else
+		return -ENODEV;
+	chip->speed_hz = spi->max_speed_hz;
+
+	chip->cr0 = clk_div
+			| SSCR0_Motorola
+			| SSCR0_DataSize(spi->bits_per_word > 16 ?
+				spi->bits_per_word - 16 : spi->bits_per_word)
+			| SSCR0_SSE
+			| (spi->bits_per_word > 16 ? SSCR0_EDSS : 0);
+	chip->cr1 |= (((spi->mode & SPI_CPHA) != 0) << 4)
+			| (((spi->mode & SPI_CPOL) != 0) << 3);
+
+	/* NOTE:  PXA25x_SSP _could_ use external clocking ... */
+	if (drv_data->ssp_type != PXA25x_SSP)
+		dev_dbg(&spi->dev, "%d bits/word, %d Hz, mode %d\n",
+				spi->bits_per_word,
+				(CLOCK_SPEED_HZ)
+					/ (1 + ((chip->cr0 & SSCR0_SCR) >> 8)),
+				spi->mode & 0x3);
+	else
+		dev_dbg(&spi->dev, "%d bits/word, %d Hz, mode %d\n",
+				spi->bits_per_word,
+				(CLOCK_SPEED_HZ/2)
+					/ (1 + ((chip->cr0 & SSCR0_SCR) >> 8)),
+				spi->mode & 0x3);
+
+	if (spi->bits_per_word <= 8) {
+		chip->n_bytes = 1;
+		chip->dma_width = DCMD_WIDTH1;
+		chip->read = u8_reader;
+		chip->write = u8_writer;
+	} else if (spi->bits_per_word <= 16) {
+		chip->n_bytes = 2;
+		chip->dma_width = DCMD_WIDTH2;
+		chip->read = u16_reader;
+		chip->write = u16_writer;
+	} else if (spi->bits_per_word <= 32) {
+		chip->cr0 |= SSCR0_EDSS;
+		chip->n_bytes = 4;
+		chip->dma_width = DCMD_WIDTH4;
+		chip->read = u32_reader;
+		chip->write = u32_writer;
+	} else {
+		dev_err(&spi->dev, "invalid wordsize\n");
+		kfree(chip);
+		return -ENODEV;
+	}
+	chip->bits_per_word = spi->bits_per_word;
+
+	spi_set_ctldata(spi, chip);
+
+	return 0;
+}
+
+static void cleanup(const struct spi_device *spi)
+{
+	struct chip_data *chip = spi_get_ctldata((struct spi_device *)spi);
+
+	kfree(chip);
+}
+
+static int init_queue(struct driver_data *drv_data)
+{
+	INIT_LIST_HEAD(&drv_data->queue);
+	spin_lock_init(&drv_data->lock);
+
+	drv_data->run = QUEUE_STOPPED;
+	drv_data->busy = 0;
+
+	tasklet_init(&drv_data->pump_transfers,
+			pump_transfers,	(unsigned long)drv_data);
+
+	INIT_WORK(&drv_data->pump_messages, pump_messages, drv_data);
+	drv_data->workqueue = create_singlethread_workqueue(
+					drv_data->master->cdev.dev->bus_id);
+	if (drv_data->workqueue == NULL)
+		return -EBUSY;
+
+	return 0;
+}
+
+static int start_queue(struct driver_data *drv_data)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&drv_data->lock, flags);
+
+	if (drv_data->run == QUEUE_RUNNING || drv_data->busy) {
+		spin_unlock_irqrestore(&drv_data->lock, flags);
+		return -EBUSY;
+	}
+
+	drv_data->run = QUEUE_RUNNING;
+	drv_data->cur_msg = NULL;
+	drv_data->cur_transfer = NULL;
+	drv_data->cur_chip = NULL;
+	spin_unlock_irqrestore(&drv_data->lock, flags);
+
+	queue_work(drv_data->workqueue, &drv_data->pump_messages);
+
+	return 0;
+}
+
+static int stop_queue(struct driver_data *drv_data)
+{
+	unsigned long flags;
+	unsigned limit = 500;
+	int status = 0;
+
+	spin_lock_irqsave(&drv_data->lock, flags);
+
+	/* This is a bit lame, but is optimized for the common execution path.
+	 * A wait_queue on the drv_data->busy could be used, but then the common
+	 * execution path (pump_messages) would be required to call wake_up or
+	 * friends on every SPI message. Do this instead */
+	drv_data->run = QUEUE_STOPPED;
+	while (!list_empty(&drv_data->queue) && drv_data->busy && limit--) {
+		spin_unlock_irqrestore(&drv_data->lock, flags);
+		msleep(10);
+		spin_lock_irqsave(&drv_data->lock, flags);
+	}
+
+	if (!list_empty(&drv_data->queue) || drv_data->busy)
+		status = -EBUSY;
+
+	spin_unlock_irqrestore(&drv_data->lock, flags);
+
+	return status;
+}
+
+static int destroy_queue(struct driver_data *drv_data)
+{
+	int status;
+
+	status = stop_queue(drv_data);
+	if (status != 0)
+		return status;
+
+	destroy_workqueue(drv_data->workqueue);
+
+	return 0;
+}
+
+static int pxa2xx_spi_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct pxa2xx_spi_master *platform_info;
+	struct spi_master *master;
+	struct driver_data *drv_data = 0;
+	struct resource *memory_resource;
+	int irq;
+	int status = 0;
+
+	platform_info = dev->platform_data;
+
+	if (platform_info->ssp_type == SSP_UNDEFINED) {
+		dev_err(&pdev->dev, "undefined SSP\n");
+		return -ENODEV;
+	}
+
+	/* Allocate master with space for drv_data and null dma buffer */
+	master = spi_alloc_master(dev, sizeof(struct driver_data) + 16);
+	if (!master) {
+		dev_err(&pdev->dev, "can not alloc spi_master\n");
+		return -ENOMEM;
+	}
+	drv_data = spi_master_get_devdata(master);
+	drv_data->master = master;
+	drv_data->master_info = platform_info;
+	drv_data->pdev = pdev;
+
+	master->bus_num = pdev->id;
+	master->num_chipselect = platform_info->num_chipselect;
+	master->cleanup = cleanup;
+	master->setup = setup;
+	master->transfer = transfer;
+
+	drv_data->ssp_type = platform_info->ssp_type;
+	drv_data->null_dma_buf = (u32 *)ALIGN((u32)(drv_data +
+						sizeof(struct driver_data)), 8);
+
+	/* Setup register addresses */
+	memory_resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!memory_resource) {
+		dev_err(&pdev->dev, "memory resources not defined\n");
+		status = -ENODEV;
+		goto out_error_master_alloc;
+	}
+
+	drv_data->ioaddr = (void *)io_p2v((unsigned long)(memory_resource->start));
+	drv_data->ssdr_physical = memory_resource->start + 0x00000010;
+	if (platform_info->ssp_type == PXA25x_SSP) {
+		drv_data->int_cr1 = SSCR1_TIE | SSCR1_RIE;
+		drv_data->dma_cr1 = 0;
+		drv_data->clear_sr = SSSR_ROR;
+		drv_data->mask_sr = SSSR_RFS | SSSR_TFS | SSSR_ROR;
+	} else {
+		drv_data->int_cr1 = SSCR1_TIE | SSCR1_RIE | SSCR1_TINTE;
+		drv_data->dma_cr1 = SSCR1_TSRE | SSCR1_RSRE | SSCR1_TINTE;
+		drv_data->clear_sr = SSSR_ROR | SSSR_TINT;
+		drv_data->mask_sr = SSSR_TINT | SSSR_RFS | SSSR_TFS | SSSR_ROR;
+	}
+
+	/* Attach to IRQ */
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(&pdev->dev, "irq resource not defined\n");
+		status = -ENODEV;
+		goto out_error_master_alloc;
+	}
+
+	status = request_irq(irq, ssp_int, 0, dev->bus_id, drv_data);
+	if (status < 0) {
+		dev_err(&pdev->dev, "can not get IRQ\n");
+		goto out_error_master_alloc;
+	}
+
+	/* Setup DMA if requested */
+	drv_data->tx_channel = -1;
+	drv_data->rx_channel = -1;
+	if (platform_info->enable_dma) {
+
+		/* Get two DMA channels	(rx and tx) */
+		drv_data->rx_channel = pxa_request_dma("pxa2xx_spi_ssp_rx",
+							DMA_PRIO_HIGH,
+							dma_handler,
+							drv_data);
+		if (drv_data->rx_channel < 0) {
+			dev_err(dev, "problem (%d) requesting rx channel\n",
+				drv_data->rx_channel);
+			status = -ENODEV;
+			goto out_error_irq_alloc;
+		}
+		drv_data->tx_channel = pxa_request_dma("pxa2xx_spi_ssp_tx",
+							DMA_PRIO_MEDIUM,
+							dma_handler,
+							drv_data);
+		if (drv_data->tx_channel < 0) {
+			dev_err(dev, "problem (%d) requesting tx channel\n",
+				drv_data->tx_channel);
+			status = -ENODEV;
+			goto out_error_dma_alloc;
+		}
+
+		if (drv_data->ioaddr == SSP1_VIRT) {
+				DRCMRRXSSDR = DRCMR_MAPVLD
+						| drv_data->rx_channel;
+				DRCMRTXSSDR = DRCMR_MAPVLD
+						| drv_data->tx_channel;
+		} else if (drv_data->ioaddr == SSP2_VIRT) {
+				DRCMRRXSS2DR = DRCMR_MAPVLD
+						| drv_data->rx_channel;
+				DRCMRTXSS2DR = DRCMR_MAPVLD
+						| drv_data->tx_channel;
+		} else if (drv_data->ioaddr == SSP3_VIRT) {
+				DRCMRRXSS3DR = DRCMR_MAPVLD
+						| drv_data->rx_channel;
+				DRCMRTXSS3DR = DRCMR_MAPVLD
+						| drv_data->tx_channel;
+		} else {
+			dev_err(dev, "bad SSP type\n");
+			goto out_error_dma_alloc;
+		}
+	}
+
+	/* Enable SOC clock */
+	pxa_set_cken(platform_info->clock_enable, 1);
+
+	/* Load default SSP configuration */
+	write_SSCR0(0, drv_data->ioaddr);
+	write_SSCR1(SSCR1_RxTresh(4) | SSCR1_TxTresh(12), drv_data->ioaddr);
+	write_SSCR0(SSCR0_SerClkDiv(2)
+			| SSCR0_Motorola
+			| SSCR0_DataSize(8),
+			drv_data->ioaddr);
+	if (drv_data->ssp_type != PXA25x_SSP)
+		write_SSTO(0, drv_data->ioaddr);
+	write_SSPSP(0, drv_data->ioaddr);
+
+	/* Initial and start queue */
+	status = init_queue(drv_data);
+	if (status != 0) {
+		dev_err(&pdev->dev, "problem initializing queue\n");
+		goto out_error_clock_enabled;
+	}
+	status = start_queue(drv_data);
+	if (status != 0) {
+		dev_err(&pdev->dev, "problem starting queue\n");
+		goto out_error_clock_enabled;
+	}
+
+	/* Register with the SPI framework */
+	platform_set_drvdata(pdev, drv_data);
+	status = spi_register_master(master);
+	if (status != 0) {
+		dev_err(&pdev->dev, "problem registering spi master\n");
+		goto out_error_queue_alloc;
+	}
+
+	return status;
+
+out_error_queue_alloc:
+	destroy_queue(drv_data);
+
+out_error_clock_enabled:
+	pxa_set_cken(platform_info->clock_enable, 0);
+
+out_error_dma_alloc:
+	if (drv_data->tx_channel != -1)
+		pxa_free_dma(drv_data->tx_channel);
+	if (drv_data->rx_channel != -1)
+		pxa_free_dma(drv_data->rx_channel);
+
+out_error_irq_alloc:
+	free_irq(irq, drv_data);
+
+out_error_master_alloc:
+	spi_master_put(master);
+	return status;
+}
+
+static int pxa2xx_spi_remove(struct platform_device *pdev)
+{
+	struct driver_data *drv_data = platform_get_drvdata(pdev);
+	int irq;
+	int status = 0;
+
+	if (!drv_data)
+		return 0;
+
+	/* Remove the queue */
+	status = destroy_queue(drv_data);
+	if (status != 0)
+		return status;
+
+	/* Disable the SSP at the peripheral and SOC level */
+	write_SSCR0(0, drv_data->ioaddr);
+	pxa_set_cken(drv_data->master_info->clock_enable, 0);
+
+	/* Release DMA */
+	if (drv_data->master_info->enable_dma) {
+		if (drv_data->ioaddr == SSP1_VIRT) {
+			DRCMRRXSSDR = 0;
+			DRCMRTXSSDR = 0;
+		} else if (drv_data->ioaddr == SSP2_VIRT) {
+			DRCMRRXSS2DR = 0;
+			DRCMRTXSS2DR = 0;
+		} else if (drv_data->ioaddr == SSP3_VIRT) {
+			DRCMRRXSS3DR = 0;
+			DRCMRTXSS3DR = 0;
+		}
+		pxa_free_dma(drv_data->tx_channel);
+		pxa_free_dma(drv_data->rx_channel);
+	}
+
+	/* Release IRQ */
+	irq = platform_get_irq(pdev, 0);
+	if (irq >= 0)
+		free_irq(irq, drv_data);
+
+	/* Disconnect from the SPI framework */
+	spi_unregister_master(drv_data->master);
+
+	/* Prevent double remove */
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+static void pxa2xx_spi_shutdown(struct platform_device *pdev)
+{
+	int status = 0;
+
+	if ((status = pxa2xx_spi_remove(pdev)) != 0)
+		dev_err(&pdev->dev, "shutdown failed with %d\n", status);
+}
+
+#ifdef CONFIG_PM
+static int suspend_devices(struct device *dev, void *pm_message)
+{
+	pm_message_t *state = pm_message;
+
+	if (dev->power.power_state.event != state->event) {
+		dev_warn(dev, "pm state does not match request\n");
+		return -1;
+	}
+
+	return 0;
+}
+
+static int pxa2xx_spi_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct driver_data *drv_data = platform_get_drvdata(pdev);
+	int status = 0;
+
+	/* Check all childern for current power state */
+	if (device_for_each_child(&pdev->dev, &state, suspend_devices) != 0) {
+		dev_warn(&pdev->dev, "suspend aborted\n");
+		return -1;
+	}
+
+	status = stop_queue(drv_data);
+	if (status != 0)
+		return status;
+	write_SSCR0(0, drv_data->ioaddr);
+	pxa_set_cken(drv_data->master_info->clock_enable, 0);
+
+	return 0;
+}
+
+static int pxa2xx_spi_resume(struct platform_device *pdev)
+{
+	struct driver_data *drv_data = platform_get_drvdata(pdev);
+	int status = 0;
+
+	/* Enable the SSP clock */
+	pxa_set_cken(drv_data->master_info->clock_enable, 1);
+
+	/* Start the queue running */
+	status = start_queue(drv_data);
+	if (status != 0) {
+		dev_err(&pdev->dev, "problem starting queue (%d)\n", status);
+		return status;
+	}
+
+	return 0;
+}
+#else
+#define pxa2xx_spi_suspend NULL
+#define pxa2xx_spi_resume NULL
+#endif /* CONFIG_PM */
+
+static struct platform_driver driver = {
+	.driver = {
+		.name = "pxa2xx-spi",
+		.bus = &platform_bus_type,
+		.owner = THIS_MODULE,
+	},
+	.probe = pxa2xx_spi_probe,
+	.remove = __devexit_p(pxa2xx_spi_remove),
+	.shutdown = pxa2xx_spi_shutdown,
+	.suspend = pxa2xx_spi_suspend,
+	.resume = pxa2xx_spi_resume,
+};
+
+static int __init pxa2xx_spi_init(void)
+{
+	platform_driver_register(&driver);
+
+	return 0;
+}
+module_init(pxa2xx_spi_init);
+
+static void __exit pxa2xx_spi_exit(void)
+{
+	platform_driver_unregister(&driver);
+}
+module_exit(pxa2xx_spi_exit);
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index 94f5e8ed83a7..1cea4a6799fe 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -338,18 +338,18 @@ static struct class spi_master_class = {
  * spi_alloc_master - allocate SPI master controller
  * @dev: the controller, possibly using the platform_bus
  * @size: how much driver-private data to preallocate; the pointer to this
- * 	memory is in the class_data field of the returned class_device,
+ *	memory is in the class_data field of the returned class_device,
  *	accessible with spi_master_get_devdata().
  *
  * This call is used only by SPI master controller drivers, which are the
  * only ones directly touching chip registers.  It's how they allocate
- * an spi_master structure, prior to calling spi_add_master().
+ * an spi_master structure, prior to calling spi_register_master().
  *
  * This must be called from context that can sleep.  It returns the SPI
  * master structure on success, else NULL.
  *
  * The caller is responsible for assigning the bus number and initializing
- * the master's methods before calling spi_add_master(); and (after errors
+ * the master's methods before calling spi_register_master(); and (after errors
  * adding the device) calling spi_master_put() to prevent a memory leak.
  */
 struct spi_master * __init_or_module
@@ -395,7 +395,7 @@ EXPORT_SYMBOL_GPL(spi_alloc_master);
 int __init_or_module
 spi_register_master(struct spi_master *master)
 {
-	static atomic_t		dyn_bus_id = ATOMIC_INIT(0);
+	static atomic_t		dyn_bus_id = ATOMIC_INIT((1<<16) - 1);
 	struct device		*dev = master->cdev.dev;
 	int			status = -ENODEV;
 	int			dynamic = 0;
@@ -404,7 +404,7 @@ spi_register_master(struct spi_master *master)
 		return -ENODEV;
 
 	/* convention:  dynamically assigned bus IDs count down from the max */
-	if (master->bus_num == 0) {
+	if (master->bus_num < 0) {
 		master->bus_num = atomic_dec_return(&dyn_bus_id);
 		dynamic = 1;
 	}
@@ -522,7 +522,8 @@ int spi_sync(struct spi_device *spi, struct spi_message *message)
 }
 EXPORT_SYMBOL_GPL(spi_sync);
 
-#define	SPI_BUFSIZ	(SMP_CACHE_BYTES)
+/* portable code must never pass more than 32 bytes */
+#define	SPI_BUFSIZ	max(32,SMP_CACHE_BYTES)
 
 static u8	*buf;
 
diff --git a/drivers/spi/spi_bitbang.c b/drivers/spi/spi_bitbang.c
index f037e5593269..dd2f950b21a7 100644
--- a/drivers/spi/spi_bitbang.c
+++ b/drivers/spi/spi_bitbang.c
@@ -138,6 +138,45 @@ static unsigned bitbang_txrx_32(
 	return t->len - count;
 }
 
+int spi_bitbang_setup_transfer(struct spi_device *spi, struct spi_transfer *t)
+{
+	struct spi_bitbang_cs	*cs = spi->controller_state;
+	u8			bits_per_word;
+	u32			hz;
+
+	if (t) {
+		bits_per_word = t->bits_per_word;
+		hz = t->speed_hz;
+	} else {
+		bits_per_word = 0;
+		hz = 0;
+	}
+
+	/* spi_transfer level calls that work per-word */
+	if (!bits_per_word)
+		bits_per_word = spi->bits_per_word;
+	if (bits_per_word <= 8)
+		cs->txrx_bufs = bitbang_txrx_8;
+	else if (bits_per_word <= 16)
+		cs->txrx_bufs = bitbang_txrx_16;
+	else if (bits_per_word <= 32)
+		cs->txrx_bufs = bitbang_txrx_32;
+	else
+		return -EINVAL;
+
+	/* nsecs = (clock period)/2 */
+	if (!hz)
+		hz = spi->max_speed_hz;
+	if (hz) {
+		cs->nsecs = (1000000000/2) / hz;
+		if (cs->nsecs > (MAX_UDELAY_MS * 1000 * 1000))
+			return -EINVAL;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(spi_bitbang_setup_transfer);
+
 /**
  * spi_bitbang_setup - default setup for per-word I/O loops
  */
@@ -145,8 +184,16 @@ int spi_bitbang_setup(struct spi_device *spi)
 {
 	struct spi_bitbang_cs	*cs = spi->controller_state;
 	struct spi_bitbang	*bitbang;
+	int			retval;
 
-	if (!spi->max_speed_hz)
+	bitbang = spi_master_get_devdata(spi->master);
+
+	/* REVISIT: some systems will want to support devices using lsb-first
+	 * bit encodings on the wire.  In pure software that would be trivial,
+	 * just bitbang_txrx_le_cphaX() routines shifting the other way, and
+	 * some hardware controllers also have this support.
+	 */
+	if ((spi->mode & SPI_LSB_FIRST) != 0)
 		return -EINVAL;
 
 	if (!cs) {
@@ -155,32 +202,20 @@ int spi_bitbang_setup(struct spi_device *spi)
 			return -ENOMEM;
 		spi->controller_state = cs;
 	}
-	bitbang = spi_master_get_devdata(spi->master);
 
 	if (!spi->bits_per_word)
 		spi->bits_per_word = 8;
 
-	/* spi_transfer level calls that work per-word */
-	if (spi->bits_per_word <= 8)
-		cs->txrx_bufs = bitbang_txrx_8;
-	else if (spi->bits_per_word <= 16)
-		cs->txrx_bufs = bitbang_txrx_16;
-	else if (spi->bits_per_word <= 32)
-		cs->txrx_bufs = bitbang_txrx_32;
-	else
-		return -EINVAL;
-
 	/* per-word shift register access, in hardware or bitbanging */
 	cs->txrx_word = bitbang->txrx_word[spi->mode & (SPI_CPOL|SPI_CPHA)];
 	if (!cs->txrx_word)
 		return -EINVAL;
 
-	/* nsecs = (clock period)/2 */
-	cs->nsecs = (1000000000/2) / (spi->max_speed_hz);
-	if (cs->nsecs > MAX_UDELAY_MS * 1000)
-		return -EINVAL;
+	retval = spi_bitbang_setup_transfer(spi, NULL);
+	if (retval < 0)
+		return retval;
 
-	dev_dbg(&spi->dev, "%s, mode %d, %u bits/w, %u nsec\n",
+	dev_dbg(&spi->dev, "%s, mode %d, %u bits/w, %u nsec/bit\n",
 			__FUNCTION__, spi->mode & (SPI_CPOL | SPI_CPHA),
 			spi->bits_per_word, 2 * cs->nsecs);
 
@@ -246,6 +281,8 @@ static void bitbang_work(void *_bitbang)
 		unsigned		tmp;
 		unsigned		cs_change;
 		int			status;
+		int			(*setup_transfer)(struct spi_device *,
+						struct spi_transfer *);
 
 		m = container_of(bitbang->queue.next, struct spi_message,
 				queue);
@@ -262,6 +299,7 @@ static void bitbang_work(void *_bitbang)
 		tmp = 0;
 		cs_change = 1;
 		status = 0;
+		setup_transfer = NULL;
 
 		list_for_each_entry (t, &m->transfers, transfer_list) {
 			if (bitbang->shutdown) {
@@ -269,6 +307,20 @@ static void bitbang_work(void *_bitbang)
 				break;
 			}
 
+			/* override or restore speed and wordsize */
+			if (t->speed_hz || t->bits_per_word) {
+				setup_transfer = bitbang->setup_transfer;
+				if (!setup_transfer) {
+					status = -ENOPROTOOPT;
+					break;
+				}
+			}
+			if (setup_transfer) {
+				status = setup_transfer(spi, t);
+				if (status < 0)
+					break;
+			}
+
 			/* set up default clock polarity, and activate chip;
 			 * this implicitly updates clock and spi modes as
 			 * previously recorded for this device via setup().
@@ -325,6 +377,10 @@ static void bitbang_work(void *_bitbang)
 		m->status = status;
 		m->complete(m->context);
 
+		/* restore speed and wordsize */
+		if (setup_transfer)
+			setup_transfer(spi, NULL);
+
 		/* normally deactivate chipselect ... unless no error and
 		 * cs_change has hinted that the next message will probably
 		 * be for this chip too.
@@ -348,6 +404,7 @@ int spi_bitbang_transfer(struct spi_device *spi, struct spi_message *m)
 {
 	struct spi_bitbang	*bitbang;
 	unsigned long		flags;
+	int			status = 0;
 
 	m->actual_length = 0;
 	m->status = -EINPROGRESS;
@@ -357,11 +414,15 @@ int spi_bitbang_transfer(struct spi_device *spi, struct spi_message *m)
 		return -ESHUTDOWN;
 
 	spin_lock_irqsave(&bitbang->lock, flags);
-	list_add_tail(&m->queue, &bitbang->queue);
-	queue_work(bitbang->workqueue, &bitbang->work);
+	if (!spi->max_speed_hz)
+		status = -ENETDOWN;
+	else {
+		list_add_tail(&m->queue, &bitbang->queue);
+		queue_work(bitbang->workqueue, &bitbang->work);
+	}
 	spin_unlock_irqrestore(&bitbang->lock, flags);
 
-	return 0;
+	return status;
 }
 EXPORT_SYMBOL_GPL(spi_bitbang_transfer);
 
@@ -406,6 +467,9 @@ int spi_bitbang_start(struct spi_bitbang *bitbang)
 		bitbang->use_dma = 0;
 		bitbang->txrx_bufs = spi_bitbang_bufs;
 		if (!bitbang->master->setup) {
+			if (!bitbang->setup_transfer)
+				bitbang->setup_transfer =
+					 spi_bitbang_setup_transfer;
 			bitbang->master->setup = spi_bitbang_setup;
 			bitbang->master->cleanup = spi_bitbang_cleanup;
 		}
diff --git a/drivers/spi/spi_butterfly.c b/drivers/spi/spi_butterfly.c
index ff9e5faa4dc9..a006a1ee27ac 100644
--- a/drivers/spi/spi_butterfly.c
+++ b/drivers/spi/spi_butterfly.c
@@ -321,6 +321,7 @@ static void butterfly_attach(struct parport *p)
 	 * (firmware resets at45, acts as spi slave) or neither (we ignore
 	 * both, AVR uses AT45).  Here we expect firmware for the first option.
 	 */
+
 	pp->info[0].max_speed_hz = 15 * 1000 * 1000;
 	strcpy(pp->info[0].modalias, "mtd_dataflash");
 	pp->info[0].platform_data = &flash;
diff --git a/drivers/spi/spi_mpc83xx.c b/drivers/spi/spi_mpc83xx.c
new file mode 100644
index 000000000000..5d92a7e5cb41
--- /dev/null
+++ b/drivers/spi/spi_mpc83xx.c
@@ -0,0 +1,483 @@
+/*
+ * MPC83xx SPI controller driver.
+ *
+ * Maintainer: Kumar Gala
+ *
+ * Copyright (C) 2006 Polycom, Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/completion.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/device.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_bitbang.h>
+#include <linux/platform_device.h>
+#include <linux/fsl_devices.h>
+
+#include <asm/irq.h>
+#include <asm/io.h>
+
+/* SPI Controller registers */
+struct mpc83xx_spi_reg {
+	u8 res1[0x20];
+	__be32 mode;
+	__be32 event;
+	__be32 mask;
+	__be32 command;
+	__be32 transmit;
+	__be32 receive;
+};
+
+/* SPI Controller mode register definitions */
+#define	SPMODE_CI_INACTIVEHIGH	(1 << 29)
+#define	SPMODE_CP_BEGIN_EDGECLK	(1 << 28)
+#define	SPMODE_DIV16		(1 << 27)
+#define	SPMODE_REV		(1 << 26)
+#define	SPMODE_MS		(1 << 25)
+#define	SPMODE_ENABLE		(1 << 24)
+#define	SPMODE_LEN(x)		((x) << 20)
+#define	SPMODE_PM(x)		((x) << 16)
+
+/*
+ * Default for SPI Mode:
+ * 	SPI MODE 0 (inactive low, phase middle, MSB, 8-bit length, slow clk
+ */
+#define	SPMODE_INIT_VAL (SPMODE_CI_INACTIVEHIGH | SPMODE_DIV16 | SPMODE_REV | \
+			 SPMODE_MS | SPMODE_LEN(7) | SPMODE_PM(0xf))
+
+/* SPIE register values */
+#define	SPIE_NE		0x00000200	/* Not empty */
+#define	SPIE_NF		0x00000100	/* Not full */
+
+/* SPIM register values */
+#define	SPIM_NE		0x00000200	/* Not empty */
+#define	SPIM_NF		0x00000100	/* Not full */
+
+/* SPI Controller driver's private data. */
+struct mpc83xx_spi {
+	/* bitbang has to be first */
+	struct spi_bitbang bitbang;
+	struct completion done;
+
+	struct mpc83xx_spi_reg __iomem *base;
+
+	/* rx & tx bufs from the spi_transfer */
+	const void *tx;
+	void *rx;
+
+	/* functions to deal with different sized buffers */
+	void (*get_rx) (u32 rx_data, struct mpc83xx_spi *);
+	u32(*get_tx) (struct mpc83xx_spi *);
+
+	unsigned int count;
+	u32 irq;
+
+	unsigned nsecs;		/* (clock cycle time)/2 */
+
+	u32 sysclk;
+	void (*activate_cs) (u8 cs, u8 polarity);
+	void (*deactivate_cs) (u8 cs, u8 polarity);
+};
+
+static inline void mpc83xx_spi_write_reg(__be32 __iomem * reg, u32 val)
+{
+	out_be32(reg, val);
+}
+
+static inline u32 mpc83xx_spi_read_reg(__be32 __iomem * reg)
+{
+	return in_be32(reg);
+}
+
+#define MPC83XX_SPI_RX_BUF(type) 					  \
+void mpc83xx_spi_rx_buf_##type(u32 data, struct mpc83xx_spi *mpc83xx_spi) \
+{									  \
+	type * rx = mpc83xx_spi->rx;					  \
+	*rx++ = (type)data;						  \
+	mpc83xx_spi->rx = rx;						  \
+}
+
+#define MPC83XX_SPI_TX_BUF(type)				\
+u32 mpc83xx_spi_tx_buf_##type(struct mpc83xx_spi *mpc83xx_spi)	\
+{								\
+	u32 data;						\
+	const type * tx = mpc83xx_spi->tx;			\
+	data = *tx++;						\
+	mpc83xx_spi->tx = tx;					\
+	return data;						\
+}
+
+MPC83XX_SPI_RX_BUF(u8)
+MPC83XX_SPI_RX_BUF(u16)
+MPC83XX_SPI_RX_BUF(u32)
+MPC83XX_SPI_TX_BUF(u8)
+MPC83XX_SPI_TX_BUF(u16)
+MPC83XX_SPI_TX_BUF(u32)
+
+static void mpc83xx_spi_chipselect(struct spi_device *spi, int value)
+{
+	struct mpc83xx_spi *mpc83xx_spi;
+	u8 pol = spi->mode & SPI_CS_HIGH ? 1 : 0;
+
+	mpc83xx_spi = spi_master_get_devdata(spi->master);
+
+	if (value == BITBANG_CS_INACTIVE) {
+		if (mpc83xx_spi->deactivate_cs)
+			mpc83xx_spi->deactivate_cs(spi->chip_select, pol);
+	}
+
+	if (value == BITBANG_CS_ACTIVE) {
+		u32 regval = mpc83xx_spi_read_reg(&mpc83xx_spi->base->mode);
+		u32 len = spi->bits_per_word;
+		if (len == 32)
+			len = 0;
+		else
+			len = len - 1;
+
+		/* mask out bits we are going to set */
+		regval &= ~0x38ff0000;
+
+		if (spi->mode & SPI_CPHA)
+			regval |= SPMODE_CP_BEGIN_EDGECLK;
+		if (spi->mode & SPI_CPOL)
+			regval |= SPMODE_CI_INACTIVEHIGH;
+
+		regval |= SPMODE_LEN(len);
+
+		if ((mpc83xx_spi->sysclk / spi->max_speed_hz) >= 64) {
+			u8 pm = mpc83xx_spi->sysclk / (spi->max_speed_hz * 64);
+			regval |= SPMODE_PM(pm) | SPMODE_DIV16;
+		} else {
+			u8 pm = mpc83xx_spi->sysclk / (spi->max_speed_hz * 4);
+			regval |= SPMODE_PM(pm);
+		}
+
+		mpc83xx_spi_write_reg(&mpc83xx_spi->base->mode, regval);
+		if (mpc83xx_spi->activate_cs)
+			mpc83xx_spi->activate_cs(spi->chip_select, pol);
+	}
+}
+
+static
+int mpc83xx_spi_setup_transfer(struct spi_device *spi, struct spi_transfer *t)
+{
+	struct mpc83xx_spi *mpc83xx_spi;
+	u32 regval;
+	u8 bits_per_word;
+	u32 hz;
+
+	mpc83xx_spi = spi_master_get_devdata(spi->master);
+
+	if (t) {
+		bits_per_word = t->bits_per_word;
+		hz = t->speed_hz;
+	} else {
+		bits_per_word = 0;
+		hz = 0;
+	}
+
+	/* spi_transfer level calls that work per-word */
+	if (!bits_per_word)
+		bits_per_word = spi->bits_per_word;
+
+	/* Make sure its a bit width we support [4..16, 32] */
+	if ((bits_per_word < 4)
+	    || ((bits_per_word > 16) && (bits_per_word != 32)))
+		return -EINVAL;
+
+	if (bits_per_word <= 8) {
+		mpc83xx_spi->get_rx = mpc83xx_spi_rx_buf_u8;
+		mpc83xx_spi->get_tx = mpc83xx_spi_tx_buf_u8;
+	} else if (bits_per_word <= 16) {
+		mpc83xx_spi->get_rx = mpc83xx_spi_rx_buf_u16;
+		mpc83xx_spi->get_tx = mpc83xx_spi_tx_buf_u16;
+	} else if (bits_per_word <= 32) {
+		mpc83xx_spi->get_rx = mpc83xx_spi_rx_buf_u32;
+		mpc83xx_spi->get_tx = mpc83xx_spi_tx_buf_u32;
+	} else
+		return -EINVAL;
+
+	/* nsecs = (clock period)/2 */
+	if (!hz)
+		hz = spi->max_speed_hz;
+	mpc83xx_spi->nsecs = (1000000000 / 2) / hz;
+	if (mpc83xx_spi->nsecs > MAX_UDELAY_MS * 1000)
+		return -EINVAL;
+
+	if (bits_per_word == 32)
+		bits_per_word = 0;
+	else
+		bits_per_word = bits_per_word - 1;
+
+	regval = mpc83xx_spi_read_reg(&mpc83xx_spi->base->mode);
+
+	/* Mask out bits_per_wordgth */
+	regval &= 0xff0fffff;
+	regval |= SPMODE_LEN(bits_per_word);
+
+	mpc83xx_spi_write_reg(&mpc83xx_spi->base->mode, regval);
+
+	return 0;
+}
+
+static int mpc83xx_spi_setup(struct spi_device *spi)
+{
+	struct spi_bitbang *bitbang;
+	struct mpc83xx_spi *mpc83xx_spi;
+	int retval;
+
+	if (!spi->max_speed_hz)
+		return -EINVAL;
+
+	bitbang = spi_master_get_devdata(spi->master);
+	mpc83xx_spi = spi_master_get_devdata(spi->master);
+
+	if (!spi->bits_per_word)
+		spi->bits_per_word = 8;
+
+	retval = mpc83xx_spi_setup_transfer(spi, NULL);
+	if (retval < 0)
+		return retval;
+
+	dev_dbg(&spi->dev, "%s, mode %d, %u bits/w, %u nsec\n",
+		__FUNCTION__, spi->mode & (SPI_CPOL | SPI_CPHA),
+		spi->bits_per_word, 2 * mpc83xx_spi->nsecs);
+
+	/* NOTE we _need_ to call chipselect() early, ideally with adapter
+	 * setup, unless the hardware defaults cooperate to avoid confusion
+	 * between normal (active low) and inverted chipselects.
+	 */
+
+	/* deselect chip (low or high) */
+	spin_lock(&bitbang->lock);
+	if (!bitbang->busy) {
+		bitbang->chipselect(spi, BITBANG_CS_INACTIVE);
+		ndelay(mpc83xx_spi->nsecs);
+	}
+	spin_unlock(&bitbang->lock);
+
+	return 0;
+}
+
+static int mpc83xx_spi_bufs(struct spi_device *spi, struct spi_transfer *t)
+{
+	struct mpc83xx_spi *mpc83xx_spi;
+	u32 word;
+
+	mpc83xx_spi = spi_master_get_devdata(spi->master);
+
+	mpc83xx_spi->tx = t->tx_buf;
+	mpc83xx_spi->rx = t->rx_buf;
+	mpc83xx_spi->count = t->len;
+	INIT_COMPLETION(mpc83xx_spi->done);
+
+	/* enable rx ints */
+	mpc83xx_spi_write_reg(&mpc83xx_spi->base->mask, SPIM_NE);
+
+	/* transmit word */
+	word = mpc83xx_spi->get_tx(mpc83xx_spi);
+	mpc83xx_spi_write_reg(&mpc83xx_spi->base->transmit, word);
+
+	wait_for_completion(&mpc83xx_spi->done);
+
+	/* disable rx ints */
+	mpc83xx_spi_write_reg(&mpc83xx_spi->base->mask, 0);
+
+	return t->len - mpc83xx_spi->count;
+}
+
+irqreturn_t mpc83xx_spi_irq(s32 irq, void *context_data,
+			    struct pt_regs * ptregs)
+{
+	struct mpc83xx_spi *mpc83xx_spi = context_data;
+	u32 event;
+	irqreturn_t ret = IRQ_NONE;
+
+	/* Get interrupt events(tx/rx) */
+	event = mpc83xx_spi_read_reg(&mpc83xx_spi->base->event);
+
+	/* We need handle RX first */
+	if (event & SPIE_NE) {
+		u32 rx_data = mpc83xx_spi_read_reg(&mpc83xx_spi->base->receive);
+
+		if (mpc83xx_spi->rx)
+			mpc83xx_spi->get_rx(rx_data, mpc83xx_spi);
+
+		ret = IRQ_HANDLED;
+	}
+
+	if ((event & SPIE_NF) == 0)
+		/* spin until TX is done */
+		while (((event =
+			 mpc83xx_spi_read_reg(&mpc83xx_spi->base->event)) &
+						SPIE_NF) == 0)
+			 cpu_relax();
+
+	mpc83xx_spi->count -= 1;
+	if (mpc83xx_spi->count) {
+		if (mpc83xx_spi->tx) {
+			u32 word = mpc83xx_spi->get_tx(mpc83xx_spi);
+			mpc83xx_spi_write_reg(&mpc83xx_spi->base->transmit,
+					      word);
+		}
+	} else {
+		complete(&mpc83xx_spi->done);
+	}
+
+	/* Clear the events */
+	mpc83xx_spi_write_reg(&mpc83xx_spi->base->event, event);
+
+	return ret;
+}
+
+static int __init mpc83xx_spi_probe(struct platform_device *dev)
+{
+	struct spi_master *master;
+	struct mpc83xx_spi *mpc83xx_spi;
+	struct fsl_spi_platform_data *pdata;
+	struct resource *r;
+	u32 regval;
+	int ret = 0;
+
+	/* Get resources(memory, IRQ) associated with the device */
+	master = spi_alloc_master(&dev->dev, sizeof(struct mpc83xx_spi));
+
+	if (master == NULL) {
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	platform_set_drvdata(dev, master);
+	pdata = dev->dev.platform_data;
+
+	if (pdata == NULL) {
+		ret = -ENODEV;
+		goto free_master;
+	}
+
+	r = platform_get_resource(dev, IORESOURCE_MEM, 0);
+	if (r == NULL) {
+		ret = -ENODEV;
+		goto free_master;
+	}
+
+	mpc83xx_spi = spi_master_get_devdata(master);
+	mpc83xx_spi->bitbang.master = spi_master_get(master);
+	mpc83xx_spi->bitbang.chipselect = mpc83xx_spi_chipselect;
+	mpc83xx_spi->bitbang.setup_transfer = mpc83xx_spi_setup_transfer;
+	mpc83xx_spi->bitbang.txrx_bufs = mpc83xx_spi_bufs;
+	mpc83xx_spi->sysclk = pdata->sysclk;
+	mpc83xx_spi->activate_cs = pdata->activate_cs;
+	mpc83xx_spi->deactivate_cs = pdata->deactivate_cs;
+	mpc83xx_spi->get_rx = mpc83xx_spi_rx_buf_u8;
+	mpc83xx_spi->get_tx = mpc83xx_spi_tx_buf_u8;
+
+	mpc83xx_spi->bitbang.master->setup = mpc83xx_spi_setup;
+	init_completion(&mpc83xx_spi->done);
+
+	mpc83xx_spi->base = ioremap(r->start, r->end - r->start + 1);
+	if (mpc83xx_spi->base == NULL) {
+		ret = -ENOMEM;
+		goto put_master;
+	}
+
+	mpc83xx_spi->irq = platform_get_irq(dev, 0);
+
+	if (mpc83xx_spi->irq < 0) {
+		ret = -ENXIO;
+		goto unmap_io;
+	}
+
+	/* Register for SPI Interrupt */
+	ret = request_irq(mpc83xx_spi->irq, mpc83xx_spi_irq,
+			  0, "mpc83xx_spi", mpc83xx_spi);
+
+	if (ret != 0)
+		goto unmap_io;
+
+	master->bus_num = pdata->bus_num;
+	master->num_chipselect = pdata->max_chipselect;
+
+	/* SPI controller initializations */
+	mpc83xx_spi_write_reg(&mpc83xx_spi->base->mode, 0);
+	mpc83xx_spi_write_reg(&mpc83xx_spi->base->mask, 0);
+	mpc83xx_spi_write_reg(&mpc83xx_spi->base->command, 0);
+	mpc83xx_spi_write_reg(&mpc83xx_spi->base->event, 0xffffffff);
+
+	/* Enable SPI interface */
+	regval = pdata->initial_spmode | SPMODE_INIT_VAL | SPMODE_ENABLE;
+	mpc83xx_spi_write_reg(&mpc83xx_spi->base->mode, regval);
+
+	ret = spi_bitbang_start(&mpc83xx_spi->bitbang);
+
+	if (ret != 0)
+		goto free_irq;
+
+	printk(KERN_INFO
+	       "%s: MPC83xx SPI Controller driver at 0x%p (irq = %d)\n",
+	       dev->dev.bus_id, mpc83xx_spi->base, mpc83xx_spi->irq);
+
+	return ret;
+
+free_irq:
+	free_irq(mpc83xx_spi->irq, mpc83xx_spi);
+unmap_io:
+	iounmap(mpc83xx_spi->base);
+put_master:
+	spi_master_put(master);
+free_master:
+	kfree(master);
+err:
+	return ret;
+}
+
+static int __devexit mpc83xx_spi_remove(struct platform_device *dev)
+{
+	struct mpc83xx_spi *mpc83xx_spi;
+	struct spi_master *master;
+
+	master = platform_get_drvdata(dev);
+	mpc83xx_spi = spi_master_get_devdata(master);
+
+	spi_bitbang_stop(&mpc83xx_spi->bitbang);
+	free_irq(mpc83xx_spi->irq, mpc83xx_spi);
+	iounmap(mpc83xx_spi->base);
+	spi_master_put(mpc83xx_spi->bitbang.master);
+
+	return 0;
+}
+
+static struct platform_driver mpc83xx_spi_driver = {
+	.probe = mpc83xx_spi_probe,
+	.remove = __devexit_p(mpc83xx_spi_remove),
+	.driver = {
+		   .name = "mpc83xx_spi",
+	},
+};
+
+static int __init mpc83xx_spi_init(void)
+{
+	return platform_driver_register(&mpc83xx_spi_driver);
+}
+
+static void __exit mpc83xx_spi_exit(void)
+{
+	platform_driver_unregister(&mpc83xx_spi_driver);
+}
+
+module_init(mpc83xx_spi_init);
+module_exit(mpc83xx_spi_exit);
+
+MODULE_AUTHOR("Kumar Gala");
+MODULE_DESCRIPTION("Simple MPC83xx SPI Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/spi/spi_s3c24xx.c b/drivers/spi/spi_s3c24xx.c
new file mode 100644
index 000000000000..5fc14563ee3a
--- /dev/null
+++ b/drivers/spi/spi_s3c24xx.c
@@ -0,0 +1,453 @@
+/* linux/drivers/spi/spi_s3c24xx.c
+ *
+ * Copyright (c) 2006 Ben Dooks
+ * Copyright (c) 2006 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+
+//#define DEBUG
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/workqueue.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_bitbang.h>
+
+#include <asm/io.h>
+#include <asm/dma.h>
+#include <asm/hardware.h>
+
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-spi.h>
+#include <asm/arch/spi.h>
+
+struct s3c24xx_spi {
+	/* bitbang has to be first */
+	struct spi_bitbang	 bitbang;
+	struct completion	 done;
+
+	void __iomem		*regs;
+	int			 irq;
+	int			 len;
+	int			 count;
+
+	/* data buffers */
+	const unsigned char	*tx;
+	unsigned char		*rx;
+
+	struct clk		*clk;
+	struct resource		*ioarea;
+	struct spi_master	*master;
+	struct spi_device	*curdev;
+	struct device		*dev;
+	struct s3c2410_spi_info *pdata;
+};
+
+#define SPCON_DEFAULT (S3C2410_SPCON_MSTR | S3C2410_SPCON_SMOD_INT)
+#define SPPIN_DEFAULT (S3C2410_SPPIN_KEEP)
+
+static inline struct s3c24xx_spi *to_hw(struct spi_device *sdev)
+{
+	return spi_master_get_devdata(sdev->master);
+}
+
+static void s3c24xx_spi_chipsel(struct spi_device *spi, int value)
+{
+	struct s3c24xx_spi *hw = to_hw(spi);
+	unsigned int cspol = spi->mode & SPI_CS_HIGH ? 1 : 0;
+	unsigned int spcon;
+
+	switch (value) {
+	case BITBANG_CS_INACTIVE:
+		if (hw->pdata->set_cs)
+			hw->pdata->set_cs(hw->pdata, value, cspol);
+		else
+			s3c2410_gpio_setpin(hw->pdata->pin_cs, cspol ^ 1);
+		break;
+
+	case BITBANG_CS_ACTIVE:
+		spcon = readb(hw->regs + S3C2410_SPCON);
+
+		if (spi->mode & SPI_CPHA)
+			spcon |= S3C2410_SPCON_CPHA_FMTB;
+		else
+			spcon &= ~S3C2410_SPCON_CPHA_FMTB;
+
+		if (spi->mode & SPI_CPOL)
+			spcon |= S3C2410_SPCON_CPOL_HIGH;
+		else
+			spcon &= ~S3C2410_SPCON_CPOL_HIGH;
+
+		spcon |= S3C2410_SPCON_ENSCK;
+
+		/* write new configration */
+
+		writeb(spcon, hw->regs + S3C2410_SPCON);
+
+		if (hw->pdata->set_cs)
+			hw->pdata->set_cs(hw->pdata, value, cspol);
+		else
+			s3c2410_gpio_setpin(hw->pdata->pin_cs, cspol);
+
+		break;
+
+	}
+}
+
+static int s3c24xx_spi_setupxfer(struct spi_device *spi,
+				 struct spi_transfer *t)
+{
+	struct s3c24xx_spi *hw = to_hw(spi);
+	unsigned int bpw;
+	unsigned int hz;
+	unsigned int div;
+
+	bpw = t ? t->bits_per_word : spi->bits_per_word;
+	hz  = t ? t->speed_hz : spi->max_speed_hz;
+
+	if (bpw != 8) {
+		dev_err(&spi->dev, "invalid bits-per-word (%d)\n", bpw);
+		return -EINVAL;
+	}
+
+	div = clk_get_rate(hw->clk) / hz;
+
+	/* is clk = pclk / (2 * (pre+1)), or is it
+	 *    clk = (pclk * 2) / ( pre + 1) */
+
+	div = (div / 2) - 1;
+
+	if (div < 0)
+		div = 1;
+
+	if (div > 255)
+		div = 255;
+
+	dev_dbg(&spi->dev, "setting pre-scaler to %d (hz %d)\n", div, hz);
+	writeb(div, hw->regs + S3C2410_SPPRE);
+
+	spin_lock(&hw->bitbang.lock);
+	if (!hw->bitbang.busy) {
+		hw->bitbang.chipselect(spi, BITBANG_CS_INACTIVE);
+		/* need to ndelay for 0.5 clocktick ? */
+	}
+	spin_unlock(&hw->bitbang.lock);
+
+	return 0;
+}
+
+static int s3c24xx_spi_setup(struct spi_device *spi)
+{
+	int ret;
+
+	if (!spi->bits_per_word)
+		spi->bits_per_word = 8;
+
+	if ((spi->mode & SPI_LSB_FIRST) != 0)
+		return -EINVAL;
+
+	ret = s3c24xx_spi_setupxfer(spi, NULL);
+	if (ret < 0) {
+		dev_err(&spi->dev, "setupxfer returned %d\n", ret);
+		return ret;
+	}
+
+	dev_dbg(&spi->dev, "%s: mode %d, %u bpw, %d hz\n",
+		__FUNCTION__, spi->mode, spi->bits_per_word,
+		spi->max_speed_hz);
+
+	return 0;
+}
+
+static inline unsigned int hw_txbyte(struct s3c24xx_spi *hw, int count)
+{
+	return hw->tx ? hw->tx[count] : 0xff;
+}
+
+static int s3c24xx_spi_txrx(struct spi_device *spi, struct spi_transfer *t)
+{
+	struct s3c24xx_spi *hw = to_hw(spi);
+
+	dev_dbg(&spi->dev, "txrx: tx %p, rx %p, len %d\n",
+		t->tx_buf, t->rx_buf, t->len);
+
+	hw->tx = t->tx_buf;
+	hw->rx = t->rx_buf;
+	hw->len = t->len;
+	hw->count = 0;
+
+	/* send the first byte */
+	writeb(hw_txbyte(hw, 0), hw->regs + S3C2410_SPTDAT);
+	wait_for_completion(&hw->done);
+
+	return hw->count;
+}
+
+static irqreturn_t s3c24xx_spi_irq(int irq, void *dev, struct pt_regs *regs)
+{
+	struct s3c24xx_spi *hw = dev;
+	unsigned int spsta = readb(hw->regs + S3C2410_SPSTA);
+	unsigned int count = hw->count;
+
+	if (spsta & S3C2410_SPSTA_DCOL) {
+		dev_dbg(hw->dev, "data-collision\n");
+		complete(&hw->done);
+		goto irq_done;
+	}
+
+	if (!(spsta & S3C2410_SPSTA_READY)) {
+		dev_dbg(hw->dev, "spi not ready for tx?\n");
+		complete(&hw->done);
+		goto irq_done;
+	}
+
+	hw->count++;
+
+	if (hw->rx)
+		hw->rx[count] = readb(hw->regs + S3C2410_SPRDAT);
+
+	count++;
+
+	if (count < hw->len)
+		writeb(hw_txbyte(hw, count), hw->regs + S3C2410_SPTDAT);
+	else
+		complete(&hw->done);
+
+ irq_done:
+	return IRQ_HANDLED;
+}
+
+static int s3c24xx_spi_probe(struct platform_device *pdev)
+{
+	struct s3c24xx_spi *hw;
+	struct spi_master *master;
+	struct spi_board_info *bi;
+	struct resource *res;
+	int err = 0;
+	int i;
+
+	master = spi_alloc_master(&pdev->dev, sizeof(struct s3c24xx_spi));
+	if (master == NULL) {
+		dev_err(&pdev->dev, "No memory for spi_master\n");
+		err = -ENOMEM;
+		goto err_nomem;
+	}
+
+	hw = spi_master_get_devdata(master);
+	memset(hw, 0, sizeof(struct s3c24xx_spi));
+
+	hw->master = spi_master_get(master);
+	hw->pdata = pdev->dev.platform_data;
+	hw->dev = &pdev->dev;
+
+	if (hw->pdata == NULL) {
+		dev_err(&pdev->dev, "No platform data supplied\n");
+		err = -ENOENT;
+		goto err_no_pdata;
+	}
+
+	platform_set_drvdata(pdev, hw);
+	init_completion(&hw->done);
+
+	/* setup the state for the bitbang driver */
+
+	hw->bitbang.master         = hw->master;
+	hw->bitbang.setup_transfer = s3c24xx_spi_setupxfer;
+	hw->bitbang.chipselect     = s3c24xx_spi_chipsel;
+	hw->bitbang.txrx_bufs      = s3c24xx_spi_txrx;
+	hw->bitbang.master->setup  = s3c24xx_spi_setup;
+
+	dev_dbg(hw->dev, "bitbang at %p\n", &hw->bitbang);
+
+	/* find and map our resources */
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (res == NULL) {
+		dev_err(&pdev->dev, "Cannot get IORESOURCE_MEM\n");
+		err = -ENOENT;
+		goto err_no_iores;
+	}
+
+	hw->ioarea = request_mem_region(res->start, (res->end - res->start)+1,
+					pdev->name);
+
+	if (hw->ioarea == NULL) {
+		dev_err(&pdev->dev, "Cannot reserve region\n");
+		err = -ENXIO;
+		goto err_no_iores;
+	}
+
+	hw->regs = ioremap(res->start, (res->end - res->start)+1);
+	if (hw->regs == NULL) {
+		dev_err(&pdev->dev, "Cannot map IO\n");
+		err = -ENXIO;
+		goto err_no_iomap;
+	}
+
+	hw->irq = platform_get_irq(pdev, 0);
+	if (hw->irq < 0) {
+		dev_err(&pdev->dev, "No IRQ specified\n");
+		err = -ENOENT;
+		goto err_no_irq;
+	}
+
+	err = request_irq(hw->irq, s3c24xx_spi_irq, 0, pdev->name, hw);
+	if (err) {
+		dev_err(&pdev->dev, "Cannot claim IRQ\n");
+		goto err_no_irq;
+	}
+
+	hw->clk = clk_get(&pdev->dev, "spi");
+	if (IS_ERR(hw->clk)) {
+		dev_err(&pdev->dev, "No clock for device\n");
+		err = PTR_ERR(hw->clk);
+		goto err_no_clk;
+	}
+
+	/* for the moment, permanently enable the clock */
+
+	clk_enable(hw->clk);
+
+	/* program defaults into the registers */
+
+	writeb(0xff, hw->regs + S3C2410_SPPRE);
+	writeb(SPPIN_DEFAULT, hw->regs + S3C2410_SPPIN);
+	writeb(SPCON_DEFAULT, hw->regs + S3C2410_SPCON);
+
+	/* setup any gpio we can */
+
+	if (!hw->pdata->set_cs) {
+		s3c2410_gpio_setpin(hw->pdata->pin_cs, 1);
+		s3c2410_gpio_cfgpin(hw->pdata->pin_cs, S3C2410_GPIO_OUTPUT);
+	}
+
+	/* register our spi controller */
+
+	err = spi_bitbang_start(&hw->bitbang);
+	if (err) {
+		dev_err(&pdev->dev, "Failed to register SPI master\n");
+		goto err_register;
+	}
+
+	dev_dbg(hw->dev, "shutdown=%d\n", hw->bitbang.shutdown);
+
+	/* register all the devices associated */
+
+	bi = &hw->pdata->board_info[0];
+	for (i = 0; i < hw->pdata->board_size; i++, bi++) {
+		dev_info(hw->dev, "registering %s\n", bi->modalias);
+
+		bi->controller_data = hw;
+		spi_new_device(master, bi);
+	}
+
+	return 0;
+
+ err_register:
+	clk_disable(hw->clk);
+	clk_put(hw->clk);
+
+ err_no_clk:
+	free_irq(hw->irq, hw);
+
+ err_no_irq:
+	iounmap(hw->regs);
+
+ err_no_iomap:
+	release_resource(hw->ioarea);
+	kfree(hw->ioarea);
+
+ err_no_iores:
+ err_no_pdata:
+	spi_master_put(hw->master);;
+
+ err_nomem:
+	return err;
+}
+
+static int s3c24xx_spi_remove(struct platform_device *dev)
+{
+	struct s3c24xx_spi *hw = platform_get_drvdata(dev);
+
+	platform_set_drvdata(dev, NULL);
+
+	spi_unregister_master(hw->master);
+
+	clk_disable(hw->clk);
+	clk_put(hw->clk);
+
+	free_irq(hw->irq, hw);
+	iounmap(hw->regs);
+
+	release_resource(hw->ioarea);
+	kfree(hw->ioarea);
+
+	spi_master_put(hw->master);
+	return 0;
+}
+
+
+#ifdef CONFIG_PM
+
+static int s3c24xx_spi_suspend(struct platform_device *pdev, pm_message_t msg)
+{
+	struct s3c24xx_spi *hw = platform_get_drvdata(pdev);
+
+	clk_disable(hw->clk);
+	return 0;
+}
+
+static int s3c24xx_spi_resume(struct platform_device *pdev)
+{
+	struct s3c24xx_spi *hw = platform_get_drvdata(pdev);
+
+	clk_enable(hw->clk);
+	return 0;
+}
+
+#else
+#define s3c24xx_spi_suspend NULL
+#define s3c24xx_spi_resume  NULL
+#endif
+
+static struct platform_driver s3c24xx_spidrv = {
+	.probe		= s3c24xx_spi_probe,
+	.remove		= s3c24xx_spi_remove,
+	.suspend	= s3c24xx_spi_suspend,
+	.resume		= s3c24xx_spi_resume,
+	.driver		= {
+		.name	= "s3c2410-spi",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init s3c24xx_spi_init(void)
+{
+        return platform_driver_register(&s3c24xx_spidrv);
+}
+
+static void __exit s3c24xx_spi_exit(void)
+{
+        platform_driver_unregister(&s3c24xx_spidrv);
+}
+
+module_init(s3c24xx_spi_init);
+module_exit(s3c24xx_spi_exit);
+
+MODULE_DESCRIPTION("S3C24XX SPI Driver");
+MODULE_AUTHOR("Ben Dooks, <ben@simtec.co.uk>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/spi/spi_s3c24xx_gpio.c b/drivers/spi/spi_s3c24xx_gpio.c
new file mode 100644
index 000000000000..aacdceb8f44b
--- /dev/null
+++ b/drivers/spi/spi_s3c24xx_gpio.c
@@ -0,0 +1,188 @@
+/* linux/drivers/spi/spi_s3c24xx_gpio.c
+ *
+ * Copyright (c) 2006 Ben Dooks
+ * Copyright (c) 2006 Simtec Electronics
+ *
+ * S3C24XX GPIO based SPI driver
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+#include <linux/platform_device.h>
+
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_bitbang.h>
+
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/spi-gpio.h>
+#include <asm/arch/hardware.h>
+
+struct s3c2410_spigpio {
+	struct spi_bitbang		 bitbang;
+
+	struct s3c2410_spigpio_info	*info;
+	struct platform_device		*dev;
+};
+
+static inline struct s3c2410_spigpio *spidev_to_sg(struct spi_device *spi)
+{
+	return spi->controller_data;
+}
+
+static inline void setsck(struct spi_device *dev, int on)
+{
+	struct s3c2410_spigpio *sg = spidev_to_sg(dev);
+	s3c2410_gpio_setpin(sg->info->pin_clk, on ? 1 : 0);
+}
+
+static inline void setmosi(struct spi_device *dev, int on)
+{
+	struct s3c2410_spigpio *sg = spidev_to_sg(dev);
+	s3c2410_gpio_setpin(sg->info->pin_mosi, on ? 1 : 0);
+}
+
+static inline u32 getmiso(struct spi_device *dev)
+{
+	struct s3c2410_spigpio *sg = spidev_to_sg(dev);
+	return s3c2410_gpio_getpin(sg->info->pin_miso) ? 1 : 0;
+}
+
+#define spidelay(x) ndelay(x)
+
+#define	EXPAND_BITBANG_TXRX
+#include <linux/spi/spi_bitbang.h>
+
+
+static u32 s3c2410_spigpio_txrx_mode0(struct spi_device *spi,
+				      unsigned nsecs, u32 word, u8 bits)
+{
+	return bitbang_txrx_be_cpha0(spi, nsecs, 0, word, bits);
+}
+
+static u32 s3c2410_spigpio_txrx_mode1(struct spi_device *spi,
+				      unsigned nsecs, u32 word, u8 bits)
+{
+	return bitbang_txrx_be_cpha1(spi, nsecs, 0, word, bits);
+}
+
+static void s3c2410_spigpio_chipselect(struct spi_device *dev, int value)
+{
+	struct s3c2410_spigpio *sg = spidev_to_sg(dev);
+
+	if (sg->info && sg->info->chip_select)
+		(sg->info->chip_select)(sg->info, value);
+}
+
+static int s3c2410_spigpio_probe(struct platform_device *dev)
+{
+	struct spi_master	*master;
+	struct s3c2410_spigpio  *sp;
+	int ret;
+	int i;
+
+	master = spi_alloc_master(&dev->dev, sizeof(struct s3c2410_spigpio));
+	if (master == NULL) {
+		dev_err(&dev->dev, "failed to allocate spi master\n");
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	sp = spi_master_get_devdata(master);
+
+	platform_set_drvdata(dev, sp);
+
+	/* copy in the plkatform data */
+	sp->info = dev->dev.platform_data;
+
+	/* setup spi bitbang adaptor */
+	sp->bitbang.master = spi_master_get(master);
+	sp->bitbang.chipselect = s3c2410_spigpio_chipselect;
+
+	sp->bitbang.txrx_word[SPI_MODE_0] = s3c2410_spigpio_txrx_mode0;
+	sp->bitbang.txrx_word[SPI_MODE_1] = s3c2410_spigpio_txrx_mode1;
+
+	/* set state of spi pins */
+	s3c2410_gpio_setpin(sp->info->pin_clk, 0);
+	s3c2410_gpio_setpin(sp->info->pin_mosi, 0);
+
+	s3c2410_gpio_cfgpin(sp->info->pin_clk, S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_cfgpin(sp->info->pin_mosi, S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_cfgpin(sp->info->pin_miso, S3C2410_GPIO_INPUT);
+
+	ret = spi_bitbang_start(&sp->bitbang);
+	if (ret)
+		goto err_no_bitbang;
+
+	/* register the chips to go with the board */
+
+	for (i = 0; i < sp->info->board_size; i++) {
+		dev_info(&dev->dev, "registering %p: %s\n",
+			 &sp->info->board_info[i],
+			 sp->info->board_info[i].modalias);
+
+		sp->info->board_info[i].controller_data = sp;
+		spi_new_device(master, sp->info->board_info + i);
+	}
+
+	return 0;
+
+ err_no_bitbang:
+	spi_master_put(sp->bitbang.master);
+ err:
+	return ret;
+
+}
+
+static int s3c2410_spigpio_remove(struct platform_device *dev)
+{
+	struct s3c2410_spigpio *sp = platform_get_drvdata(dev);
+
+	spi_bitbang_stop(&sp->bitbang);
+	spi_master_put(sp->bitbang.master);
+
+	return 0;
+}
+
+/* all gpio should be held over suspend/resume, so we should
+ * not need to deal with this
+*/
+
+#define s3c2410_spigpio_suspend NULL
+#define s3c2410_spigpio_resume NULL
+
+
+static struct platform_driver s3c2410_spigpio_drv = {
+	.probe		= s3c2410_spigpio_probe,
+        .remove		= s3c2410_spigpio_remove,
+        .suspend	= s3c2410_spigpio_suspend,
+        .resume		= s3c2410_spigpio_resume,
+        .driver		= {
+		.name	= "s3c24xx-spi-gpio",
+		.owner	= THIS_MODULE,
+        },
+};
+
+static int __init s3c2410_spigpio_init(void)
+{
+        return platform_driver_register(&s3c2410_spigpio_drv);
+}
+
+static void __exit s3c2410_spigpio_exit(void)
+{
+        platform_driver_unregister(&s3c2410_spigpio_drv);
+}
+
+module_init(s3c2410_spigpio_init);
+module_exit(s3c2410_spigpio_exit);
+
+MODULE_DESCRIPTION("S3C24XX SPI Driver");
+MODULE_AUTHOR("Ben Dooks, <ben@simtec.co.uk>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/atm/speedtch.c b/drivers/usb/atm/speedtch.c
index 7860c8a5800d..956b7a1e8af9 100644
--- a/drivers/usb/atm/speedtch.c
+++ b/drivers/usb/atm/speedtch.c
@@ -69,7 +69,7 @@ static const char speedtch_driver_name[] = "speedtch";
 #define RESUBMIT_DELAY		1000	/* milliseconds */
 
 #define DEFAULT_BULK_ALTSETTING	1
-#define DEFAULT_ISOC_ALTSETTING	2
+#define DEFAULT_ISOC_ALTSETTING	3
 #define DEFAULT_DL_512_FIRST	0
 #define DEFAULT_ENABLE_ISOC	0
 #define DEFAULT_SW_BUFFERING	0
diff --git a/drivers/usb/atm/ueagle-atm.c b/drivers/usb/atm/ueagle-atm.c
index 830d2c982670..b38990adf1cd 100644
--- a/drivers/usb/atm/ueagle-atm.c
+++ b/drivers/usb/atm/ueagle-atm.c
@@ -68,7 +68,7 @@
 
 #include "usbatm.h"
 
-#define EAGLEUSBVERSION "ueagle 1.2"
+#define EAGLEUSBVERSION "ueagle 1.3"
 
 
 /*
@@ -243,7 +243,7 @@ enum {
 #define BULK_TIMEOUT 300
 #define CTRL_TIMEOUT 1000
 
-#define ACK_TIMEOUT msecs_to_jiffies(1500)
+#define ACK_TIMEOUT msecs_to_jiffies(3000)
 
 #define UEA_INTR_IFACE_NO 	0
 #define UEA_US_IFACE_NO		1
@@ -314,6 +314,10 @@ struct cmv {
 	 ((d) & 0xff) << 16 |						\
 	 ((a) & 0xff) << 8  |						\
 	 ((b) & 0xff))
+#define GETSA1(a) ((a >> 8) & 0xff)
+#define GETSA2(a) (a & 0xff)
+#define GETSA3(a) ((a >> 24) & 0xff)
+#define GETSA4(a) ((a >> 16) & 0xff)
 
 #define SA_CNTL MAKESA('C', 'N', 'T', 'L')
 #define SA_DIAG MAKESA('D', 'I', 'A', 'G')
@@ -728,11 +732,12 @@ bad2:
 	uea_err(INS_TO_USBDEV(sc), "sending DSP block %u failed\n", i);
 	return;
 bad1:
-	uea_err(INS_TO_USBDEV(sc), "invalid DSP page %u requested\n",pageno);
+	uea_err(INS_TO_USBDEV(sc), "invalid DSP page %u requested\n", pageno);
 }
 
 static inline void wake_up_cmv_ack(struct uea_softc *sc)
 {
+	BUG_ON(sc->cmv_ack);
 	sc->cmv_ack = 1;
 	wake_up(&sc->cmv_ack_wait);
 }
@@ -743,6 +748,9 @@ static inline int wait_cmv_ack(struct uea_softc *sc)
 						   sc->cmv_ack, ACK_TIMEOUT);
 	sc->cmv_ack = 0;
 
+	uea_dbg(INS_TO_USBDEV(sc), "wait_event_timeout : %d ms\n",
+			jiffies_to_msecs(ret));
+
 	if (ret < 0)
 		return ret;
 
@@ -791,6 +799,12 @@ static int uea_cmv(struct uea_softc *sc,
 	struct cmv cmv;
 	int ret;
 
+	uea_enters(INS_TO_USBDEV(sc));
+	uea_vdbg(INS_TO_USBDEV(sc), "Function : %d-%d, Address : %c%c%c%c, "
+			"offset : 0x%04x, data : 0x%08x\n",
+			FUNCTION_TYPE(function), FUNCTION_SUBTYPE(function),
+			GETSA1(address), GETSA2(address), GETSA3(address),
+			GETSA4(address), offset, data);
 	/* we send a request, but we expect a reply */
 	sc->cmv_function = function | 0x2;
 	sc->cmv_idx++;
@@ -808,7 +822,9 @@ static int uea_cmv(struct uea_softc *sc,
 	ret = uea_request(sc, UEA_SET_BLOCK, UEA_MPTX_START, CMV_SIZE, &cmv);
 	if (ret < 0)
 		return ret;
-	return wait_cmv_ack(sc);
+	ret = wait_cmv_ack(sc);
+	uea_leaves(INS_TO_USBDEV(sc));
+	return ret;
 }
 
 static inline int uea_read_cmv(struct uea_softc *sc,
@@ -922,7 +938,7 @@ static int uea_stat(struct uea_softc *sc)
 	 * we check the status again in order to detect the failure earlier
 	 */
 	if (sc->stats.phy.flags) {
-		uea_dbg(INS_TO_USBDEV(sc), "Stat flag = %d\n",
+		uea_dbg(INS_TO_USBDEV(sc), "Stat flag = 0x%x\n",
 		       sc->stats.phy.flags);
 		return 0;
 	}
@@ -1063,7 +1079,13 @@ static int uea_start_reset(struct uea_softc *sc)
 	uea_enters(INS_TO_USBDEV(sc));
 	uea_info(INS_TO_USBDEV(sc), "(re)booting started\n");
 
+	/* mask interrupt */
 	sc->booting = 1;
+	/* We need to set this here because, a ack timeout could have occured,
+	 * but before we start the reboot, the ack occurs and set this to 1.
+	 * So we will failed to wait Ready CMV.
+	 */
+	sc->cmv_ack = 0;
 	UPDATE_ATM_STAT(signal, ATM_PHY_SIG_LOST);
 
 	/* reset statistics */
@@ -1089,6 +1111,7 @@ static int uea_start_reset(struct uea_softc *sc)
 
 	msleep(1000);
 	sc->cmv_function = MAKEFUNCTION(ADSLDIRECTIVE, MODEMREADY);
+	/* demask interrupt */
 	sc->booting = 0;
 
 	/* start loading DSP */
@@ -1101,6 +1124,8 @@ static int uea_start_reset(struct uea_softc *sc)
 	if (ret < 0)
 		return ret;
 
+	uea_vdbg(INS_TO_USBDEV(sc), "Ready CMV received\n");
+
 	/* Enter in R-IDLE (cmv) until instructed otherwise */
 	ret = uea_write_cmv(sc, SA_CNTL, 0, 1);
 	if (ret < 0)
@@ -1121,6 +1146,7 @@ static int uea_start_reset(struct uea_softc *sc)
 	}
 	/* Enter in R-ACT-REQ */
 	ret = uea_write_cmv(sc, SA_CNTL, 0, 2);
+	uea_vdbg(INS_TO_USBDEV(sc), "Entering in R-ACT-REQ state\n");
 out:
 	release_firmware(cmvs_fw);
 	sc->reset = 0;
@@ -1235,6 +1261,7 @@ static void uea_dispatch_cmv(struct uea_softc *sc, struct cmv* cmv)
 
 	if (cmv->bFunction == MAKEFUNCTION(ADSLDIRECTIVE, MODEMREADY)) {
 		wake_up_cmv_ack(sc);
+		uea_leaves(INS_TO_USBDEV(sc));
 		return;
 	}
 
@@ -1249,6 +1276,7 @@ static void uea_dispatch_cmv(struct uea_softc *sc, struct cmv* cmv)
 	sc->data = sc->data << 16 | sc->data >> 16;
 
 	wake_up_cmv_ack(sc);
+	uea_leaves(INS_TO_USBDEV(sc));
 	return;
 
 bad2:
@@ -1256,12 +1284,14 @@ bad2:
 			"Function : %d, Subfunction : %d\n",
 			FUNCTION_TYPE(cmv->bFunction),
 			FUNCTION_SUBTYPE(cmv->bFunction));
+	uea_leaves(INS_TO_USBDEV(sc));
 	return;
 
 bad1:
 	uea_err(INS_TO_USBDEV(sc), "invalid cmv received, "
 			"wPreamble %d, bDirection %d\n",
 			le16_to_cpu(cmv->wPreamble), cmv->bDirection);
+	uea_leaves(INS_TO_USBDEV(sc));
 }
 
 /*
@@ -1346,7 +1376,7 @@ static int uea_boot(struct uea_softc *sc)
 	if (ret < 0) {
 		uea_err(INS_TO_USBDEV(sc),
 		       "urb submition failed with error %d\n", ret);
-		goto err1;
+		goto err;
 	}
 
 	sc->kthread = kthread_run(uea_kthread, sc, "ueagle-atm");
@@ -1360,10 +1390,10 @@ static int uea_boot(struct uea_softc *sc)
 
 err2:
 	usb_kill_urb(sc->urb_int);
-err1:
-	kfree(intr);
 err:
 	usb_free_urb(sc->urb_int);
+	sc->urb_int = NULL;
+	kfree(intr);
 	uea_leaves(INS_TO_USBDEV(sc));
 	return -ENOMEM;
 }
@@ -1508,7 +1538,7 @@ static ssize_t read_##name(struct device *dev, 			\
 	int ret = -ENODEV; 					\
 	struct uea_softc *sc; 					\
  								\
-	mutex_lock(&uea_mutex); 					\
+	mutex_lock(&uea_mutex); 				\
 	sc = dev_to_uea(dev);					\
 	if (!sc) 						\
 		goto out; 					\
@@ -1516,7 +1546,7 @@ static ssize_t read_##name(struct device *dev, 			\
 	if (reset)						\
 		sc->stats.phy.name = 0;				\
 out: 								\
-	mutex_unlock(&uea_mutex); 					\
+	mutex_unlock(&uea_mutex); 				\
 	return ret; 						\
 } 								\
 								\
@@ -1643,7 +1673,7 @@ static int uea_bind(struct usbatm_data *usbatm, struct usb_interface *intf,
 
 	sc = kzalloc(sizeof(struct uea_softc), GFP_KERNEL);
 	if (!sc) {
-		uea_err(INS_TO_USBDEV(sc), "uea_init: not enough memory !\n");
+		uea_err(usb, "uea_init: not enough memory !\n");
 		return -ENOMEM;
 	}
 
diff --git a/drivers/usb/atm/usbatm.c b/drivers/usb/atm/usbatm.c
index c1211fc037d9..546249843b8e 100644
--- a/drivers/usb/atm/usbatm.c
+++ b/drivers/usb/atm/usbatm.c
@@ -99,11 +99,11 @@ static const char usbatm_driver_name[] = "usbatm";
 
 #define UDSL_MAX_RCV_URBS		16
 #define UDSL_MAX_SND_URBS		16
-#define UDSL_MAX_BUF_SIZE		64 * 1024	/* bytes */
+#define UDSL_MAX_BUF_SIZE		65536
 #define UDSL_DEFAULT_RCV_URBS		4
 #define UDSL_DEFAULT_SND_URBS		4
-#define UDSL_DEFAULT_RCV_BUF_SIZE	64 * ATM_CELL_SIZE	/* bytes */
-#define UDSL_DEFAULT_SND_BUF_SIZE	64 * ATM_CELL_SIZE	/* bytes */
+#define UDSL_DEFAULT_RCV_BUF_SIZE	3392	/* 64 * ATM_CELL_SIZE */
+#define UDSL_DEFAULT_SND_BUF_SIZE	3392	/* 64 * ATM_CELL_SIZE */
 
 #define ATM_CELL_HEADER			(ATM_CELL_SIZE - ATM_CELL_PAYLOAD)
 
@@ -135,7 +135,7 @@ MODULE_PARM_DESC(rcv_buf_bytes,
 module_param(snd_buf_bytes, uint, S_IRUGO);
 MODULE_PARM_DESC(snd_buf_bytes,
 		 "Size of the buffers used for transmission, in bytes (range: 1-"
-		 __MODULE_STRING(UDSL_MAX_SND_BUF_SIZE) ", default: "
+		 __MODULE_STRING(UDSL_MAX_BUF_SIZE) ", default: "
 		 __MODULE_STRING(UDSL_DEFAULT_SND_BUF_SIZE) ")");
 
 
diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig
index ff03184da403..a08787e253aa 100644
--- a/drivers/usb/core/Kconfig
+++ b/drivers/usb/core/Kconfig
@@ -99,4 +99,11 @@ config USB_OTG_WHITELIST
 	  normal Linux-USB hosts do (other than the warning), and is
 	  convenient for many stages of product development.
 
+config USB_OTG_BLACKLIST_HUB
+	bool "Disable external hubs"
+	depends on USB_OTG
+	help
+	  If you say Y here, then Linux will refuse to enumerate
+	  external hubs.  OTG hosts are allowed to reduce hardware
+	  and software costs by not supporting external hubs.
 
diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
index 0d2193b69235..66b78404ab34 100644
--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
@@ -213,11 +213,9 @@ int usb_hcd_pci_suspend (struct pci_dev *dev, pm_message_t message)
 
 	if (hcd->driver->suspend) {
 		retval = hcd->driver->suspend(hcd, message);
-		if (retval) {
-			dev_dbg (&dev->dev, "PCI pre-suspend fail, %d\n",
-				retval);
+		suspend_report_result(hcd->driver->suspend, retval);
+		if (retval)
 			goto done;
-		}
 	}
 	synchronize_irq(dev->irq);
 
@@ -263,6 +261,7 @@ int usb_hcd_pci_suspend (struct pci_dev *dev, pm_message_t message)
 		 * some device state (e.g. as part of clock reinit).
 		 */
 		retval = pci_set_power_state (dev, PCI_D3hot);
+		suspend_report_result(pci_set_power_state, retval);
 		if (retval == 0) {
 			int wake = device_can_wakeup(&hcd->self.root_hub->dev);
 
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index fbd938d4ea58..e2e00ba4e1e6 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -1805,6 +1805,12 @@ int usb_add_hcd(struct usb_hcd *hcd,
 			USB_SPEED_FULL;
 	hcd->self.root_hub = rhdev;
 
+	/* wakeup flag init defaults to "everything works" for root hubs,
+	 * but drivers can override it in reset() if needed, along with
+	 * recording the overall controller's system wakeup capability.
+	 */
+	device_init_wakeup(&rhdev->dev, 1);
+
 	/* "reset" is misnamed; its role is now one-time init. the controller
 	 * should already have been reset (and boot firmware kicked off etc).
 	 */
@@ -1813,13 +1819,6 @@ int usb_add_hcd(struct usb_hcd *hcd,
 		goto err_hcd_driver_setup;
 	}
 
-	/* wakeup flag init is in transition; for now we can't rely on PCI to
-	 * initialize these bits properly, so we let reset() override it.
-	 * This init should _precede_ the reset() once PCI behaves.
-	 */
-	device_init_wakeup(&rhdev->dev,
-			device_can_wakeup(hcd->self.controller));
-
 	/* NOTE: root hub and controller capabilities may not be the same */
 	if (device_can_wakeup(hcd->self.controller)
 			&& device_can_wakeup(&hcd->self.root_hub->dev))
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 8e65f7a237e4..90b8d43c6b33 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -836,6 +836,13 @@ static int hub_probe(struct usb_interface *intf, const struct usb_device_id *id)
 	desc = intf->cur_altsetting;
 	hdev = interface_to_usbdev(intf);
 
+#ifdef	CONFIG_USB_OTG_BLACKLIST_HUB
+	if (hdev->parent) {
+		dev_warn(&intf->dev, "ignoring external hub\n");
+		return -ENODEV;
+	}
+#endif
+
 	/* Some hubs have a subclass of 1, which AFAICT according to the */
 	/*  specs is not defined, but it works */
 	if ((desc->desc.bInterfaceSubClass != 0) &&
@@ -1022,7 +1029,6 @@ void usb_set_device_state(struct usb_device *udev,
 		recursively_mark_NOTATTACHED(udev);
 	spin_unlock_irqrestore(&device_state_lock, flags);
 }
-EXPORT_SYMBOL(usb_set_device_state);
 
 
 #ifdef CONFIG_PM
@@ -1162,19 +1168,9 @@ static inline const char *plural(int n)
 static int choose_configuration(struct usb_device *udev)
 {
 	int i;
-	u16 devstatus;
-	int bus_powered;
 	int num_configs;
 	struct usb_host_config *c, *best;
 
-	/* If this fails, assume the device is bus-powered */
-	devstatus = 0;
-	usb_get_status(udev, USB_RECIP_DEVICE, 0, &devstatus);
-	le16_to_cpus(&devstatus);
-	bus_powered = ((devstatus & (1 << USB_DEVICE_SELF_POWERED)) == 0);
-	dev_dbg(&udev->dev, "device is %s-powered\n",
-			bus_powered ? "bus" : "self");
-
 	best = NULL;
 	c = udev->config;
 	num_configs = udev->descriptor.bNumConfigurations;
@@ -1191,6 +1187,19 @@ static int choose_configuration(struct usb_device *udev)
 		 * similar errors in their descriptors.  If the next test
 		 * were allowed to execute, such configurations would always
 		 * be rejected and the devices would not work as expected.
+		 * In the meantime, we run the risk of selecting a config
+		 * that requires external power at a time when that power
+		 * isn't available.  It seems to be the lesser of two evils.
+		 *
+		 * Bugzilla #6448 reports a device that appears to crash
+		 * when it receives a GET_DEVICE_STATUS request!  We don't
+		 * have any other way to tell whether a device is self-powered,
+		 * but since we don't use that information anywhere but here,
+		 * the call has been removed.
+		 *
+		 * Maybe the GET_DEVICE_STATUS call and the test below can
+		 * be reinstated when device firmwares become more reliable.
+		 * Don't hold your breath.
 		 */
 #if 0
 		/* Rule out self-powered configs for a bus-powered device */
diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
index d7352aa73b5e..b7fdc1cd134a 100644
--- a/drivers/usb/core/usb.c
+++ b/drivers/usb/core/usb.c
@@ -1194,7 +1194,6 @@ EXPORT_SYMBOL(usb_disabled);
 EXPORT_SYMBOL_GPL(usb_get_intf);
 EXPORT_SYMBOL_GPL(usb_put_intf);
 
-EXPORT_SYMBOL(usb_alloc_dev);
 EXPORT_SYMBOL(usb_put_dev);
 EXPORT_SYMBOL(usb_get_dev);
 EXPORT_SYMBOL(usb_hub_tt_clear_buffer);
@@ -1208,7 +1207,6 @@ EXPORT_SYMBOL(usb_ifnum_to_if);
 EXPORT_SYMBOL(usb_altnum_to_altsetting);
 
 EXPORT_SYMBOL(usb_reset_device);
-EXPORT_SYMBOL(usb_disconnect);
 
 EXPORT_SYMBOL(__usb_get_extra_descriptor);
 
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index d80f71877d68..363b2ad74ae6 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -69,11 +69,11 @@ choice
 	   often need board-specific hooks.
 
 config USB_GADGET_NET2280
-	boolean "NetChip 2280"
+	boolean "NetChip 228x"
 	depends on PCI
 	select USB_GADGET_DUALSPEED
 	help
-	   NetChip 2280 is a PCI based USB peripheral controller which
+	   NetChip 2280 / 2282 is a PCI based USB peripheral controller which
 	   supports both full and high speed USB 2.0 data transfers.  
 	   
 	   It has six configurable endpoints, as well as endpoint zero
diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
index 865858cfd1c2..b8d0b7825bf3 100644
--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
@@ -1709,7 +1709,7 @@ static int __devexit at91udc_remove(struct platform_device *dev)
 }
 
 #ifdef CONFIG_PM
-static int at91udc_suspend(struct platform_device *dev, u32 state, u32 level)
+static int at91udc_suspend(struct platform_device *dev, pm_message_t mesg)
 {
 	struct at91_udc *udc = platform_get_drvdata(dev);
 
@@ -1731,7 +1731,7 @@ static int at91udc_suspend(struct platform_device *dev, u32 state, u32 level)
 	return 0;
 }
 
-static int at91udc_resume(struct platform_device *dev, u32 level)
+static int at91udc_resume(struct platform_device *dev)
 {
 	struct at91_udc *udc = platform_get_drvdata(dev);
 
diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c
index c3d8e5c5bf28..9c4422ac9de4 100644
--- a/drivers/usb/gadget/ether.c
+++ b/drivers/usb/gadget/ether.c
@@ -2338,6 +2338,9 @@ autoconf_fail:
 		hs_subset_descriptors();
 	}
 
+	device_desc.bMaxPacketSize0 = gadget->ep0->maxpacket;
+	usb_gadget_set_selfpowered (gadget);
+
 	/* For now RNDIS is always a second config */
 	if (rndis)
 		device_desc.bNumConfigurations = 2;
@@ -2361,9 +2364,6 @@ autoconf_fail:
 #endif
 #endif	/* DUALSPEED */
 
-	device_desc.bMaxPacketSize0 = gadget->ep0->maxpacket;
-	usb_gadget_set_selfpowered (gadget);
-
 	if (gadget->is_otg) {
 		otg_descriptor.bmAttributes |= USB_OTG_HNP,
 		eth_config.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c
index cf3be299e353..6f887478b148 100644
--- a/drivers/usb/gadget/file_storage.c
+++ b/drivers/usb/gadget/file_storage.c
@@ -71,6 +71,12 @@
  * requirement amounts to two 16K buffers, size configurable by a parameter.
  * Support is included for both full-speed and high-speed operation.
  *
+ * Note that the driver is slightly non-portable in that it assumes a
+ * single memory/DMA buffer will be useable for bulk-in, bulk-out, and
+ * interrupt-in endpoints.  With most device controllers this isn't an
+ * issue, but there may be some with hardware restrictions that prevent
+ * a buffer from being used by more than one endpoint.
+ *
  * Module options:
  *
  *	file=filename[,filename...]
@@ -108,6 +114,14 @@
  * setting are not allowed when the medium is loaded.
  *
  * This gadget driver is heavily based on "Gadget Zero" by David Brownell.
+ * The driver's SCSI command interface was based on the "Information
+ * technology - Small Computer System Interface - 2" document from
+ * X3T9.2 Project 375D, Revision 10L, 7-SEP-93, available at
+ * <http://www.t10.org/ftp/t10/drafts/s2/s2-r10l.pdf>.  The single exception
+ * is opcode 0x23 (READ FORMAT CAPACITIES), which was based on the
+ * "Universal Serial Bus Mass Storage Class UFI Command Specification"
+ * document, Revision 1.0, December 14, 1998, available at
+ * <http://www.usb.org/developers/devclass_docs/usbmass-ufi10.pdf>.
  */
 
 
@@ -334,11 +348,9 @@ MODULE_LICENSE("Dual BSD/GPL");
 
 #define MAX_LUNS	8
 
-	/* Arggh!  There should be a module_param_array_named macro! */
-static char		*file[MAX_LUNS];
-static int		ro[MAX_LUNS];
-
 static struct {
+	char		*file[MAX_LUNS];
+	int		ro[MAX_LUNS];
 	int		num_filenames;
 	int		num_ros;
 	unsigned int	nluns;
@@ -370,10 +382,11 @@ static struct {
 	};
 
 
-module_param_array(file, charp, &mod_data.num_filenames, S_IRUGO);
+module_param_array_named(file, mod_data.file, charp, &mod_data.num_filenames,
+		S_IRUGO);
 MODULE_PARM_DESC(file, "names of backing files or devices");
 
-module_param_array(ro, bool, &mod_data.num_ros, S_IRUGO);
+module_param_array_named(ro, mod_data.ro, bool, &mod_data.num_ros, S_IRUGO);
 MODULE_PARM_DESC(ro, "true to force read-only");
 
 module_param_named(luns, mod_data.nluns, uint, S_IRUGO);
@@ -1795,6 +1808,7 @@ static int do_write(struct fsg_dev *fsg)
 			 * the bulk-out maxpacket size */
 			bh->outreq->length = bh->bulk_out_intended_length =
 					amount;
+			bh->outreq->short_not_ok = 1;
 			start_transfer(fsg, fsg->bulk_out, bh->outreq,
 					&bh->outreq_busy, &bh->state);
 			fsg->next_buffhd_to_fill = bh->next;
@@ -2398,6 +2412,7 @@ static int throw_away_data(struct fsg_dev *fsg)
 			 * the bulk-out maxpacket size */
 			bh->outreq->length = bh->bulk_out_intended_length =
 					amount;
+			bh->outreq->short_not_ok = 1;
 			start_transfer(fsg, fsg->bulk_out, bh->outreq,
 					&bh->outreq_busy, &bh->state);
 			fsg->next_buffhd_to_fill = bh->next;
@@ -3029,6 +3044,7 @@ static int get_next_command(struct fsg_dev *fsg)
 
 		/* Queue a request to read a Bulk-only CBW */
 		set_bulk_out_req_length(fsg, bh, USB_BULK_CB_WRAP_LEN);
+		bh->outreq->short_not_ok = 1;
 		start_transfer(fsg, fsg->bulk_out, bh->outreq,
 				&bh->outreq_busy, &bh->state);
 
@@ -3859,7 +3875,7 @@ static int __init fsg_bind(struct usb_gadget *gadget)
 
 	for (i = 0; i < fsg->nluns; ++i) {
 		curlun = &fsg->luns[i];
-		curlun->ro = ro[i];
+		curlun->ro = mod_data.ro[i];
 		curlun->dev.parent = &gadget->dev;
 		curlun->dev.driver = &fsg_driver.driver;
 		dev_set_drvdata(&curlun->dev, fsg);
@@ -3876,8 +3892,9 @@ static int __init fsg_bind(struct usb_gadget *gadget)
 			kref_get(&fsg->ref);
 		}
 
-		if (file[i] && *file[i]) {
-			if ((rc = open_backing_file(curlun, file[i])) != 0)
+		if (mod_data.file[i] && *mod_data.file[i]) {
+			if ((rc = open_backing_file(curlun,
+					mod_data.file[i])) != 0)
 				goto out;
 		} else if (!mod_data.removable) {
 			ERROR(fsg, "no file given for LUN%d\n", i);
@@ -3953,6 +3970,9 @@ static int __init fsg_bind(struct usb_gadget *gadget)
 	for (i = 0; i < NUM_BUFFERS; ++i) {
 		struct fsg_buffhd	*bh = &fsg->buffhds[i];
 
+		/* Allocate for the bulk-in endpoint.  We assume that
+		 * the buffer will also work with the bulk-out (and
+		 * interrupt-in) endpoint. */
 		bh->buf = usb_ep_alloc_buffer(fsg->bulk_in, mod_data.buflen,
 				&bh->dma, GFP_KERNEL);
 		if (!bh->buf)
diff --git a/drivers/usb/gadget/gadget_chips.h b/drivers/usb/gadget/gadget_chips.h
index c4081407171f..aa80f0910720 100644
--- a/drivers/usb/gadget/gadget_chips.h
+++ b/drivers/usb/gadget/gadget_chips.h
@@ -100,9 +100,9 @@
 #define gadget_is_musbhsfc(g)	0
 #endif
 
-/* Mentor high speed "dual role" controller, peripheral mode */
-#ifdef CONFIG_USB_GADGET_MUSBHDRC
-#define gadget_is_musbhdrc(g)	!strcmp("musbhdrc_udc", (g)->name)
+/* Mentor high speed "dual role" controller, in peripheral role */
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+#define gadget_is_musbhdrc(g)	!strcmp("musb_hdrc", (g)->name)
 #else
 #define gadget_is_musbhdrc(g)	0
 #endif
diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c
index 3f618ce6998d..0eb010a3f5bc 100644
--- a/drivers/usb/gadget/inode.c
+++ b/drivers/usb/gadget/inode.c
@@ -810,7 +810,7 @@ ep_config (struct file *fd, const char __user *buf, size_t len, loff_t *ptr)
 		if (value == 0)
 			data->state = STATE_EP_ENABLED;
 		break;
-#ifdef	HIGHSPEED
+#ifdef	CONFIG_USB_GADGET_DUALSPEED
 	case USB_SPEED_HIGH:
 		/* fails if caller didn't provide that descriptor... */
 		value = usb_ep_enable (ep, &data->hs_desc);
@@ -982,7 +982,7 @@ ep0_read (struct file *fd, char __user *buf, size_t len, loff_t *ptr)
 			/* assume that was SET_CONFIGURATION */
 			if (dev->current_config) {
 				unsigned power;
-#ifdef	HIGHSPEED
+#ifdef	CONFIG_USB_GADGET_DUALSPEED
 				if (dev->gadget->speed == USB_SPEED_HIGH)
 					power = dev->hs_config->bMaxPower;
 				else
@@ -1262,7 +1262,7 @@ static struct file_operations ep0_io_operations = {
  * Unrecognized ep0 requests may be handled in user space.
  */
 
-#ifdef	HIGHSPEED
+#ifdef	CONFIG_USB_GADGET_DUALSPEED
 static void make_qualifier (struct dev_data *dev)
 {
 	struct usb_qualifier_descriptor		qual;
@@ -1291,7 +1291,7 @@ static int
 config_buf (struct dev_data *dev, u8 type, unsigned index)
 {
 	int		len;
-#ifdef HIGHSPEED
+#ifdef CONFIG_USB_GADGET_DUALSPEED
 	int		hs;
 #endif
 
@@ -1299,7 +1299,7 @@ config_buf (struct dev_data *dev, u8 type, unsigned index)
 	if (index > 0)
 		return -EINVAL;
 
-#ifdef HIGHSPEED
+#ifdef CONFIG_USB_GADGET_DUALSPEED
 	hs = (dev->gadget->speed == USB_SPEED_HIGH);
 	if (type == USB_DT_OTHER_SPEED_CONFIG)
 		hs = !hs;
@@ -1335,12 +1335,12 @@ gadgetfs_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
 		dev->state = STATE_CONNECTED;
 		dev->dev->bMaxPacketSize0 = gadget->ep0->maxpacket;
 
-#ifdef	HIGHSPEED
+#ifdef	CONFIG_USB_GADGET_DUALSPEED
 		if (gadget->speed == USB_SPEED_HIGH && dev->hs_config == 0) {
 			ERROR (dev, "no high speed config??\n");
 			return -EINVAL;
 		}
-#endif	/* HIGHSPEED */
+#endif	/* CONFIG_USB_GADGET_DUALSPEED */
 
 		INFO (dev, "connected\n");
 		event = next_event (dev, GADGETFS_CONNECT);
@@ -1352,11 +1352,11 @@ gadgetfs_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
 			/* ... down_trylock (&data->lock) ... */
 			if (data->state != STATE_EP_DEFER_ENABLE)
 				continue;
-#ifdef	HIGHSPEED
+#ifdef	CONFIG_USB_GADGET_DUALSPEED
 			if (gadget->speed == USB_SPEED_HIGH)
 				value = usb_ep_enable (ep, &data->hs_desc);
 			else
-#endif	/* HIGHSPEED */
+#endif	/* CONFIG_USB_GADGET_DUALSPEED */
 				value = usb_ep_enable (ep, &data->desc);
 			if (value) {
 				ERROR (dev, "deferred %s enable --> %d\n",
@@ -1391,7 +1391,7 @@ gadgetfs_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
 			value = min (w_length, (u16) sizeof *dev->dev);
 			req->buf = dev->dev;
 			break;
-#ifdef	HIGHSPEED
+#ifdef	CONFIG_USB_GADGET_DUALSPEED
 		case USB_DT_DEVICE_QUALIFIER:
 			if (!dev->hs_config)
 				break;
@@ -1428,7 +1428,7 @@ gadgetfs_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
 			// user mode expected to disable endpoints
 		} else {
 			u8	config, power;
-#ifdef	HIGHSPEED
+#ifdef	CONFIG_USB_GADGET_DUALSPEED
 			if (gadget->speed == USB_SPEED_HIGH) {
 				config = dev->hs_config->bConfigurationValue;
 				power = dev->hs_config->bMaxPower;
@@ -1614,6 +1614,7 @@ static int activate_ep_files (struct dev_data *dev)
 				data, &ep_config_operations,
 				&data->dentry);
 		if (!data->inode) {
+			usb_ep_free_request(ep, data->req);
 			kfree (data);
 			goto enomem;
 		}
@@ -1728,7 +1729,7 @@ gadgetfs_suspend (struct usb_gadget *gadget)
 }
 
 static struct usb_gadget_driver gadgetfs_driver = {
-#ifdef	HIGHSPEED
+#ifdef	CONFIG_USB_GADGET_DUALSPEED
 	.speed		= USB_SPEED_HIGH,
 #else
 	.speed		= USB_SPEED_FULL,
diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c
index fb73dc100535..0b9293493957 100644
--- a/drivers/usb/gadget/net2280.c
+++ b/drivers/usb/gadget/net2280.c
@@ -26,6 +26,8 @@
  * Copyright (C) 2003 David Brownell
  * Copyright (C) 2003-2005 PLX Technology, Inc.
  *
+ * Modified Seth Levy 2005 PLX Technology, Inc. to provide compatibility with 2282 chip
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
@@ -71,8 +73,8 @@
 #include <asm/unaligned.h>
 
 
-#define	DRIVER_DESC		"PLX NET2280 USB Peripheral Controller"
-#define	DRIVER_VERSION		"2005 Feb 03"
+#define	DRIVER_DESC		"PLX NET228x USB Peripheral Controller"
+#define	DRIVER_VERSION		"2005 Sept 27"
 
 #define	DMA_ADDR_INVALID	(~(dma_addr_t)0)
 #define	EP_DONTUSE		13	/* nonzero */
@@ -118,7 +120,7 @@ module_param (fifo_mode, ushort, 0644);
 /* enable_suspend -- When enabled, the driver will respond to
  * USB suspend requests by powering down the NET2280.  Otherwise,
  * USB suspend requests will be ignored.  This is acceptible for
- * self-powered devices, and helps avoid some quirks.
+ * self-powered devices
  */
 static int enable_suspend = 0;
 
@@ -223,6 +225,11 @@ net2280_enable (struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
 	ep->is_in = (tmp & USB_DIR_IN) != 0;
 	if (!ep->is_in)
 		writel ((1 << SET_NAK_OUT_PACKETS), &ep->regs->ep_rsp);
+	else if (dev->pdev->device != 0x2280) {
+		/* Added for 2282, Don't use nak packets on an in endpoint, this was ignored on 2280 */
+		writel ((1 << CLEAR_NAK_OUT_PACKETS)
+			| (1 << CLEAR_NAK_OUT_PACKETS_MODE), &ep->regs->ep_rsp);
+	}
 
 	writel (tmp, &ep->regs->ep_cfg);
 
@@ -232,8 +239,9 @@ net2280_enable (struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
 		writel (tmp, &dev->regs->pciirqenb0);
 
 		tmp = (1 << DATA_PACKET_RECEIVED_INTERRUPT_ENABLE)
-			| (1 << DATA_PACKET_TRANSMITTED_INTERRUPT_ENABLE)
-			| readl (&ep->regs->ep_irqenb);
+			| (1 << DATA_PACKET_TRANSMITTED_INTERRUPT_ENABLE);
+		if (dev->pdev->device == 0x2280)
+			tmp |= readl (&ep->regs->ep_irqenb);
 		writel (tmp, &ep->regs->ep_irqenb);
 	} else {				/* dma, per-request */
 		tmp = (1 << (8 + ep->num));	/* completion */
@@ -314,10 +322,18 @@ static void ep_reset (struct net2280_regs __iomem *regs, struct net2280_ep *ep)
 	/* init to our chosen defaults, notably so that we NAK OUT
 	 * packets until the driver queues a read (+note erratum 0112)
 	 */
-	tmp = (1 << SET_NAK_OUT_PACKETS_MODE)
+	if (!ep->is_in || ep->dev->pdev->device == 0x2280) {
+		tmp = (1 << SET_NAK_OUT_PACKETS_MODE)
 		| (1 << SET_NAK_OUT_PACKETS)
 		| (1 << CLEAR_EP_HIDE_STATUS_PHASE)
 		| (1 << CLEAR_INTERRUPT_MODE);
+	} else {
+		/* added for 2282 */
+		tmp = (1 << CLEAR_NAK_OUT_PACKETS_MODE)
+		| (1 << CLEAR_NAK_OUT_PACKETS)
+		| (1 << CLEAR_EP_HIDE_STATUS_PHASE)
+		| (1 << CLEAR_INTERRUPT_MODE);
+	}
 
 	if (ep->num != 0) {
 		tmp |= (1 << CLEAR_ENDPOINT_TOGGLE)
@@ -326,14 +342,18 @@ static void ep_reset (struct net2280_regs __iomem *regs, struct net2280_ep *ep)
 	writel (tmp, &ep->regs->ep_rsp);
 
 	/* scrub most status bits, and flush any fifo state */
-	writel (  (1 << TIMEOUT)
+	if (ep->dev->pdev->device == 0x2280)
+		tmp = (1 << FIFO_OVERFLOW)
+			| (1 << FIFO_UNDERFLOW);
+	else
+		tmp = 0;
+
+	writel (tmp | (1 << TIMEOUT)
 		| (1 << USB_STALL_SENT)
 		| (1 << USB_IN_NAK_SENT)
 		| (1 << USB_IN_ACK_RCVD)
 		| (1 << USB_OUT_PING_NAK_SENT)
 		| (1 << USB_OUT_ACK_SENT)
-		| (1 << FIFO_OVERFLOW)
-		| (1 << FIFO_UNDERFLOW)
 		| (1 << FIFO_FLUSH)
 		| (1 << SHORT_PACKET_OUT_DONE_INTERRUPT)
 		| (1 << SHORT_PACKET_TRANSFERRED_INTERRUPT)
@@ -718,7 +738,7 @@ fill_dma_desc (struct net2280_ep *ep, struct net2280_request *req, int valid)
 	 */
 	if (ep->is_in)
 		dmacount |= (1 << DMA_DIRECTION);
-	else if ((dmacount % ep->ep.maxpacket) != 0)
+	if ((!ep->is_in && (dmacount % ep->ep.maxpacket) != 0) || ep->dev->pdev->device != 0x2280)
 		dmacount |= (1 << END_OF_CHAIN);
 
 	req->valid = valid;
@@ -760,9 +780,12 @@ static inline void stop_dma (struct net2280_dma_regs __iomem *dma)
 static void start_queue (struct net2280_ep *ep, u32 dmactl, u32 td_dma)
 {
 	struct net2280_dma_regs	__iomem *dma = ep->dma;
+	unsigned int tmp = (1 << VALID_BIT) | (ep->is_in << DMA_DIRECTION);
+
+	if (ep->dev->pdev->device != 0x2280)
+		tmp |= (1 << END_OF_CHAIN);
 
-	writel ((1 << VALID_BIT) | (ep->is_in << DMA_DIRECTION),
-			&dma->dmacount);
+	writel (tmp, &dma->dmacount);
 	writel (readl (&dma->dmastat), &dma->dmastat);
 
 	writel (td_dma, &dma->dmadesc);
@@ -2110,7 +2133,11 @@ static void handle_ep_small (struct net2280_ep *ep)
 	VDEBUG (ep->dev, "%s ack ep_stat %08x, req %p\n",
 			ep->ep.name, t, req ? &req->req : 0);
 #endif
-	writel (t & ~(1 << NAK_OUT_PACKETS), &ep->regs->ep_stat);
+	if (!ep->is_in || ep->dev->pdev->device == 0x2280)
+		writel (t & ~(1 << NAK_OUT_PACKETS), &ep->regs->ep_stat);
+	else
+		/* Added for 2282 */
+		writel (t, &ep->regs->ep_stat);
 
 	/* for ep0, monitor token irqs to catch data stage length errors
 	 * and to synchronize on status.
@@ -2139,7 +2166,7 @@ static void handle_ep_small (struct net2280_ep *ep)
 					ep->stopped = 1;
 					set_halt (ep);
 					mode = 2;
-				} else if (!req && ep->stopped)
+				} else if (!req && !ep->stopped)
 					write_fifo (ep, NULL);
 			}
 		} else {
@@ -2214,7 +2241,8 @@ static void handle_ep_small (struct net2280_ep *ep)
 			if (likely (req)) {
 				req->td->dmacount = 0;
 				t = readl (&ep->regs->ep_avail);
-				dma_done (ep, req, count, t);
+				dma_done (ep, req, count,
+					(ep->out_overflow || t) ? -EOVERFLOW : 0);
 			}
 
 			/* also flush to prevent erratum 0106 trouble */
@@ -2252,9 +2280,7 @@ static void handle_ep_small (struct net2280_ep *ep)
 		/* if we wrote it all, we're usually done */
 		if (req->req.actual == req->req.length) {
 			if (ep->num == 0) {
-				/* wait for control status */
-				if (mode != 2)
-					req = NULL;
+				/* send zlps until the status stage */
 			} else if (!req->req.zero || len != ep->ep.maxpacket)
 				mode = 2;
 		}
@@ -2337,7 +2363,7 @@ static void handle_stat0_irqs (struct net2280 *dev, u32 stat)
 			u32			raw [2];
 			struct usb_ctrlrequest	r;
 		} u;
-		int				tmp = 0;
+		int				tmp;
 		struct net2280_request		*req;
 
 		if (dev->gadget.speed == USB_SPEED_UNKNOWN) {
@@ -2364,14 +2390,19 @@ static void handle_stat0_irqs (struct net2280 *dev, u32 stat)
 		}
 		ep->stopped = 0;
 		dev->protocol_stall = 0;
-		writel (  (1 << TIMEOUT)
+
+		if (ep->dev->pdev->device == 0x2280)
+			tmp = (1 << FIFO_OVERFLOW)
+				| (1 << FIFO_UNDERFLOW);
+		else
+			tmp = 0;
+
+		writel (tmp | (1 << TIMEOUT)
 			| (1 << USB_STALL_SENT)
 			| (1 << USB_IN_NAK_SENT)
 			| (1 << USB_IN_ACK_RCVD)
 			| (1 << USB_OUT_PING_NAK_SENT)
 			| (1 << USB_OUT_ACK_SENT)
-			| (1 << FIFO_OVERFLOW)
-			| (1 << FIFO_UNDERFLOW)
 			| (1 << SHORT_PACKET_OUT_DONE_INTERRUPT)
 			| (1 << SHORT_PACKET_TRANSFERRED_INTERRUPT)
 			| (1 << DATA_PACKET_RECEIVED_INTERRUPT)
@@ -2385,6 +2416,8 @@ static void handle_stat0_irqs (struct net2280 *dev, u32 stat)
 		cpu_to_le32s (&u.raw [0]);
 		cpu_to_le32s (&u.raw [1]);
 
+		tmp = 0;
+
 #define	w_value		le16_to_cpup (&u.r.wValue)
 #define	w_index		le16_to_cpup (&u.r.wIndex)
 #define	w_length	le16_to_cpup (&u.r.wLength)
@@ -2594,10 +2627,17 @@ static void handle_stat1_irqs (struct net2280 *dev, u32 stat)
 		writel (stat, &dev->regs->irqstat1);
 
 	/* some status we can just ignore */
-	stat &= ~((1 << CONTROL_STATUS_INTERRUPT)
-			| (1 << SUSPEND_REQUEST_INTERRUPT)
-			| (1 << RESUME_INTERRUPT)
-			| (1 << SOF_INTERRUPT));
+	if (dev->pdev->device == 0x2280)
+		stat &= ~((1 << CONTROL_STATUS_INTERRUPT)
+			  | (1 << SUSPEND_REQUEST_INTERRUPT)
+			  | (1 << RESUME_INTERRUPT)
+			  | (1 << SOF_INTERRUPT));
+	else
+		stat &= ~((1 << CONTROL_STATUS_INTERRUPT)
+			  | (1 << RESUME_INTERRUPT)
+			  | (1 << SOF_DOWN_INTERRUPT)
+			  | (1 << SOF_INTERRUPT));
+
 	if (!stat)
 		return;
 	// DEBUG (dev, "irqstat1 %08x\n", stat);
@@ -2702,6 +2742,10 @@ static irqreturn_t net2280_irq (int irq, void *_dev, struct pt_regs * r)
 {
 	struct net2280		*dev = _dev;
 
+	/* shared interrupt, not ours */
+	if (!(readl(&dev->regs->irqstat0) & (1 << INTA_ASSERTED)))
+		return IRQ_NONE;
+
 	spin_lock (&dev->lock);
 
 	/* handle disconnect, dma, and more */
@@ -2789,13 +2833,13 @@ static int net2280_probe (struct pci_dev *pdev, const struct pci_device_id *id)
 	}
 
 	/* alloc, and start init */
-	dev = kmalloc (sizeof *dev, SLAB_KERNEL);
+	dev = kzalloc (sizeof *dev, SLAB_KERNEL);
 	if (dev == NULL){
 		retval = -ENOMEM;
 		goto done;
 	}
 
-	memset (dev, 0, sizeof *dev);
+	pci_set_drvdata (pdev, dev);
 	spin_lock_init (&dev->lock);
 	dev->pdev = pdev;
 	dev->gadget.ops = &net2280_ops;
@@ -2908,7 +2952,6 @@ static int net2280_probe (struct pci_dev *pdev, const struct pci_device_id *id)
 	dev->chiprev = get_idx_reg (dev->regs, REG_CHIPREV) & 0xffff;
 
 	/* done */
-	pci_set_drvdata (pdev, dev);
 	INFO (dev, "%s\n", driver_desc);
 	INFO (dev, "irq %s, pci mem %p, chip rev %04x\n",
 			bufp, base, dev->chiprev);
@@ -2939,6 +2982,13 @@ static struct pci_device_id pci_ids [] = { {
 	.device =	0x2280,
 	.subvendor =	PCI_ANY_ID,
 	.subdevice =	PCI_ANY_ID,
+}, {
+	.class = 	((PCI_CLASS_SERIAL_USB << 8) | 0xfe),
+	.class_mask = 	~0,
+	.vendor =	0x17cc,
+	.device =	0x2282,
+	.subvendor =	PCI_ANY_ID,
+	.subdevice =	PCI_ANY_ID,
 
 }, { /* end: all zeroes */ }
 };
diff --git a/drivers/usb/gadget/net2280.h b/drivers/usb/gadget/net2280.h
index fff4509cf340..957d6df34015 100644
--- a/drivers/usb/gadget/net2280.h
+++ b/drivers/usb/gadget/net2280.h
@@ -22,420 +22,7 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
-/*-------------------------------------------------------------------------*/
-
-/* NET2280 MEMORY MAPPED REGISTERS
- *
- * The register layout came from the chip documentation, and the bit
- * number definitions were extracted from chip specification.
- *
- * Use the shift operator ('<<') to build bit masks, with readl/writel
- * to access the registers through PCI.
- */
-
-/* main registers, BAR0 + 0x0000 */
-struct net2280_regs {
-	// offset 0x0000
-	u32		devinit;
-#define     LOCAL_CLOCK_FREQUENCY                               8
-#define     FORCE_PCI_RESET                                     7
-#define     PCI_ID                                              6
-#define     PCI_ENABLE                                          5
-#define     FIFO_SOFT_RESET                                     4
-#define     CFG_SOFT_RESET                                      3
-#define     PCI_SOFT_RESET                                      2
-#define     USB_SOFT_RESET                                      1
-#define     M8051_RESET                                         0
-	u32		eectl;
-#define     EEPROM_ADDRESS_WIDTH                                23
-#define     EEPROM_CHIP_SELECT_ACTIVE                           22
-#define     EEPROM_PRESENT                                      21
-#define     EEPROM_VALID                                        20
-#define     EEPROM_BUSY                                         19
-#define     EEPROM_CHIP_SELECT_ENABLE                           18
-#define     EEPROM_BYTE_READ_START                              17
-#define     EEPROM_BYTE_WRITE_START                             16
-#define     EEPROM_READ_DATA                                    8
-#define     EEPROM_WRITE_DATA                                   0
-	u32		eeclkfreq;
-	u32		_unused0;
-	// offset 0x0010
-
-	u32		pciirqenb0;		/* interrupt PCI master ... */
-#define     SETUP_PACKET_INTERRUPT_ENABLE                       7
-#define     ENDPOINT_F_INTERRUPT_ENABLE                         6
-#define     ENDPOINT_E_INTERRUPT_ENABLE                         5
-#define     ENDPOINT_D_INTERRUPT_ENABLE                         4
-#define     ENDPOINT_C_INTERRUPT_ENABLE                         3
-#define     ENDPOINT_B_INTERRUPT_ENABLE                         2
-#define     ENDPOINT_A_INTERRUPT_ENABLE                         1
-#define     ENDPOINT_0_INTERRUPT_ENABLE                         0
-	u32		pciirqenb1;
-#define     PCI_INTERRUPT_ENABLE                                31
-#define     POWER_STATE_CHANGE_INTERRUPT_ENABLE                 27
-#define     PCI_ARBITER_TIMEOUT_INTERRUPT_ENABLE                26
-#define     PCI_PARITY_ERROR_INTERRUPT_ENABLE                   25
-#define     PCI_MASTER_ABORT_RECEIVED_INTERRUPT_ENABLE          20
-#define     PCI_TARGET_ABORT_RECEIVED_INTERRUPT_ENABLE          19
-#define     PCI_TARGET_ABORT_ASSERTED_INTERRUPT_ENABLE          18
-#define     PCI_RETRY_ABORT_INTERRUPT_ENABLE                    17
-#define     PCI_MASTER_CYCLE_DONE_INTERRUPT_ENABLE              16
-#define     GPIO_INTERRUPT_ENABLE                               13
-#define     DMA_D_INTERRUPT_ENABLE                              12
-#define     DMA_C_INTERRUPT_ENABLE                              11
-#define     DMA_B_INTERRUPT_ENABLE                              10
-#define     DMA_A_INTERRUPT_ENABLE                              9
-#define     EEPROM_DONE_INTERRUPT_ENABLE                        8
-#define     VBUS_INTERRUPT_ENABLE                               7
-#define     CONTROL_STATUS_INTERRUPT_ENABLE                     6
-#define     ROOT_PORT_RESET_INTERRUPT_ENABLE                    4
-#define     SUSPEND_REQUEST_INTERRUPT_ENABLE                    3
-#define     SUSPEND_REQUEST_CHANGE_INTERRUPT_ENABLE             2
-#define     RESUME_INTERRUPT_ENABLE                             1
-#define     SOF_INTERRUPT_ENABLE                                0
-	u32		cpu_irqenb0;		/* ... or onboard 8051 */
-#define     SETUP_PACKET_INTERRUPT_ENABLE                       7
-#define     ENDPOINT_F_INTERRUPT_ENABLE                         6
-#define     ENDPOINT_E_INTERRUPT_ENABLE                         5
-#define     ENDPOINT_D_INTERRUPT_ENABLE                         4
-#define     ENDPOINT_C_INTERRUPT_ENABLE                         3
-#define     ENDPOINT_B_INTERRUPT_ENABLE                         2
-#define     ENDPOINT_A_INTERRUPT_ENABLE                         1
-#define     ENDPOINT_0_INTERRUPT_ENABLE                         0
-	u32		cpu_irqenb1;
-#define     CPU_INTERRUPT_ENABLE                                31
-#define     POWER_STATE_CHANGE_INTERRUPT_ENABLE                 27
-#define     PCI_ARBITER_TIMEOUT_INTERRUPT_ENABLE                26
-#define     PCI_PARITY_ERROR_INTERRUPT_ENABLE                   25
-#define     PCI_INTA_INTERRUPT_ENABLE                           24
-#define     PCI_PME_INTERRUPT_ENABLE                            23
-#define     PCI_SERR_INTERRUPT_ENABLE                           22
-#define     PCI_PERR_INTERRUPT_ENABLE                           21
-#define     PCI_MASTER_ABORT_RECEIVED_INTERRUPT_ENABLE          20
-#define     PCI_TARGET_ABORT_RECEIVED_INTERRUPT_ENABLE          19
-#define     PCI_RETRY_ABORT_INTERRUPT_ENABLE                    17
-#define     PCI_MASTER_CYCLE_DONE_INTERRUPT_ENABLE              16
-#define     GPIO_INTERRUPT_ENABLE                               13
-#define     DMA_D_INTERRUPT_ENABLE                              12
-#define     DMA_C_INTERRUPT_ENABLE                              11
-#define     DMA_B_INTERRUPT_ENABLE                              10
-#define     DMA_A_INTERRUPT_ENABLE                              9
-#define     EEPROM_DONE_INTERRUPT_ENABLE                        8
-#define     VBUS_INTERRUPT_ENABLE                               7
-#define     CONTROL_STATUS_INTERRUPT_ENABLE                     6
-#define     ROOT_PORT_RESET_INTERRUPT_ENABLE                    4
-#define     SUSPEND_REQUEST_INTERRUPT_ENABLE                    3
-#define     SUSPEND_REQUEST_CHANGE_INTERRUPT_ENABLE             2
-#define     RESUME_INTERRUPT_ENABLE                             1
-#define     SOF_INTERRUPT_ENABLE                                0
-
-	// offset 0x0020
-	u32		_unused1;
-	u32		usbirqenb1;
-#define     USB_INTERRUPT_ENABLE                                31
-#define     POWER_STATE_CHANGE_INTERRUPT_ENABLE                 27
-#define     PCI_ARBITER_TIMEOUT_INTERRUPT_ENABLE                26
-#define     PCI_PARITY_ERROR_INTERRUPT_ENABLE                   25
-#define     PCI_INTA_INTERRUPT_ENABLE                           24
-#define     PCI_PME_INTERRUPT_ENABLE                            23
-#define     PCI_SERR_INTERRUPT_ENABLE                           22
-#define     PCI_PERR_INTERRUPT_ENABLE                           21
-#define     PCI_MASTER_ABORT_RECEIVED_INTERRUPT_ENABLE          20
-#define     PCI_TARGET_ABORT_RECEIVED_INTERRUPT_ENABLE          19
-#define     PCI_RETRY_ABORT_INTERRUPT_ENABLE                    17
-#define     PCI_MASTER_CYCLE_DONE_INTERRUPT_ENABLE              16
-#define     GPIO_INTERRUPT_ENABLE                               13
-#define     DMA_D_INTERRUPT_ENABLE                              12
-#define     DMA_C_INTERRUPT_ENABLE                              11
-#define     DMA_B_INTERRUPT_ENABLE                              10
-#define     DMA_A_INTERRUPT_ENABLE                              9
-#define     EEPROM_DONE_INTERRUPT_ENABLE                        8
-#define     VBUS_INTERRUPT_ENABLE                               7
-#define     CONTROL_STATUS_INTERRUPT_ENABLE                     6
-#define     ROOT_PORT_RESET_INTERRUPT_ENABLE                    4
-#define     SUSPEND_REQUEST_INTERRUPT_ENABLE                    3
-#define     SUSPEND_REQUEST_CHANGE_INTERRUPT_ENABLE             2
-#define     RESUME_INTERRUPT_ENABLE                             1
-#define     SOF_INTERRUPT_ENABLE                                0
-	u32		irqstat0;
-#define     INTA_ASSERTED                                       12
-#define     SETUP_PACKET_INTERRUPT                              7
-#define     ENDPOINT_F_INTERRUPT                                6
-#define     ENDPOINT_E_INTERRUPT                                5
-#define     ENDPOINT_D_INTERRUPT                                4
-#define     ENDPOINT_C_INTERRUPT                                3
-#define     ENDPOINT_B_INTERRUPT                                2
-#define     ENDPOINT_A_INTERRUPT                                1
-#define     ENDPOINT_0_INTERRUPT                                0
-	u32		irqstat1;
-#define     POWER_STATE_CHANGE_INTERRUPT                        27
-#define     PCI_ARBITER_TIMEOUT_INTERRUPT                       26
-#define     PCI_PARITY_ERROR_INTERRUPT                          25
-#define     PCI_INTA_INTERRUPT                                  24
-#define     PCI_PME_INTERRUPT                                   23
-#define     PCI_SERR_INTERRUPT                                  22
-#define     PCI_PERR_INTERRUPT                                  21
-#define     PCI_MASTER_ABORT_RECEIVED_INTERRUPT                 20
-#define     PCI_TARGET_ABORT_RECEIVED_INTERRUPT                 19
-#define     PCI_RETRY_ABORT_INTERRUPT                           17
-#define     PCI_MASTER_CYCLE_DONE_INTERRUPT                     16
-#define     GPIO_INTERRUPT                                      13
-#define     DMA_D_INTERRUPT                                     12
-#define     DMA_C_INTERRUPT                                     11
-#define     DMA_B_INTERRUPT                                     10
-#define     DMA_A_INTERRUPT                                     9
-#define     EEPROM_DONE_INTERRUPT                               8
-#define     VBUS_INTERRUPT                                      7
-#define     CONTROL_STATUS_INTERRUPT                            6
-#define     ROOT_PORT_RESET_INTERRUPT                           4
-#define     SUSPEND_REQUEST_INTERRUPT                           3
-#define     SUSPEND_REQUEST_CHANGE_INTERRUPT                    2
-#define     RESUME_INTERRUPT                                    1
-#define     SOF_INTERRUPT                                       0
-	// offset 0x0030
-	u32		idxaddr;
-	u32		idxdata;
-	u32		fifoctl;
-#define     PCI_BASE2_RANGE                                     16
-#define     IGNORE_FIFO_AVAILABILITY                            3
-#define     PCI_BASE2_SELECT                                    2
-#define     FIFO_CONFIGURATION_SELECT                           0
-	u32		_unused2;
-	// offset 0x0040
-	u32		memaddr;
-#define     START                                               28
-#define     DIRECTION                                           27
-#define     FIFO_DIAGNOSTIC_SELECT                              24
-#define     MEMORY_ADDRESS                                      0
-	u32		memdata0;
-	u32		memdata1;
-	u32		_unused3;
-	// offset 0x0050
-	u32		gpioctl;
-#define     GPIO3_LED_SELECT                                    12
-#define     GPIO3_INTERRUPT_ENABLE                              11
-#define     GPIO2_INTERRUPT_ENABLE                              10
-#define     GPIO1_INTERRUPT_ENABLE                              9
-#define     GPIO0_INTERRUPT_ENABLE                              8
-#define     GPIO3_OUTPUT_ENABLE                                 7
-#define     GPIO2_OUTPUT_ENABLE                                 6
-#define     GPIO1_OUTPUT_ENABLE                                 5
-#define     GPIO0_OUTPUT_ENABLE                                 4
-#define     GPIO3_DATA                                          3
-#define     GPIO2_DATA                                          2
-#define     GPIO1_DATA                                          1
-#define     GPIO0_DATA                                          0
-	u32		gpiostat;
-#define     GPIO3_INTERRUPT                                     3
-#define     GPIO2_INTERRUPT                                     2
-#define     GPIO1_INTERRUPT                                     1
-#define     GPIO0_INTERRUPT                                     0
-} __attribute__ ((packed));
-
-/* usb control, BAR0 + 0x0080 */
-struct net2280_usb_regs {
-	// offset 0x0080
-	u32		stdrsp;
-#define     STALL_UNSUPPORTED_REQUESTS                          31
-#define     SET_TEST_MODE                                       16
-#define     GET_OTHER_SPEED_CONFIGURATION                       15
-#define     GET_DEVICE_QUALIFIER                                14
-#define     SET_ADDRESS                                         13
-#define     ENDPOINT_SET_CLEAR_HALT                             12
-#define     DEVICE_SET_CLEAR_DEVICE_REMOTE_WAKEUP               11
-#define     GET_STRING_DESCRIPTOR_2                             10
-#define     GET_STRING_DESCRIPTOR_1                             9
-#define     GET_STRING_DESCRIPTOR_0                             8
-#define     GET_SET_INTERFACE                                   6
-#define     GET_SET_CONFIGURATION                               5
-#define     GET_CONFIGURATION_DESCRIPTOR                        4
-#define     GET_DEVICE_DESCRIPTOR                               3
-#define     GET_ENDPOINT_STATUS                                 2
-#define     GET_INTERFACE_STATUS                                1
-#define     GET_DEVICE_STATUS                                   0
-	u32		prodvendid;
-#define     PRODUCT_ID                                          16
-#define     VENDOR_ID                                           0
-	u32		relnum;
-	u32		usbctl;
-#define     SERIAL_NUMBER_INDEX                                 16
-#define     PRODUCT_ID_STRING_ENABLE                            13
-#define     VENDOR_ID_STRING_ENABLE                             12
-#define     USB_ROOT_PORT_WAKEUP_ENABLE                         11
-#define     VBUS_PIN                                            10
-#define     TIMED_DISCONNECT                                    9
-#define     SUSPEND_IMMEDIATELY                                 7
-#define     SELF_POWERED_USB_DEVICE                             6
-#define     REMOTE_WAKEUP_SUPPORT                               5
-#define     PME_POLARITY                                        4
-#define     USB_DETECT_ENABLE                                   3
-#define     PME_WAKEUP_ENABLE                                   2
-#define     DEVICE_REMOTE_WAKEUP_ENABLE                         1
-#define     SELF_POWERED_STATUS                                 0
-	// offset 0x0090
-	u32		usbstat;
-#define     HIGH_SPEED                                          7
-#define     FULL_SPEED                                          6
-#define     GENERATE_RESUME                                     5
-#define     GENERATE_DEVICE_REMOTE_WAKEUP                       4
-	u32		xcvrdiag;
-#define     FORCE_HIGH_SPEED_MODE                               31
-#define     FORCE_FULL_SPEED_MODE                               30
-#define     USB_TEST_MODE                                       24
-#define     LINE_STATE                                          16
-#define     TRANSCEIVER_OPERATION_MODE                          2
-#define     TRANSCEIVER_SELECT                                  1
-#define     TERMINATION_SELECT                                  0
-	u32		setup0123;
-	u32		setup4567;
-	// offset 0x0090
-	u32		_unused0;
-	u32		ouraddr;
-#define     FORCE_IMMEDIATE                                     7
-#define     OUR_USB_ADDRESS                                     0
-	u32		ourconfig;
-} __attribute__ ((packed));
-
-/* pci control, BAR0 + 0x0100 */
-struct net2280_pci_regs {
-	// offset 0x0100
-	u32		 pcimstctl;
-#define     PCI_ARBITER_PARK_SELECT                             13
-#define     PCI_MULTI LEVEL_ARBITER                             12
-#define     PCI_RETRY_ABORT_ENABLE                              11
-#define     DMA_MEMORY_WRITE_AND_INVALIDATE_ENABLE              10
-#define     DMA_READ_MULTIPLE_ENABLE                            9
-#define     DMA_READ_LINE_ENABLE                                8
-#define     PCI_MASTER_COMMAND_SELECT                           6
-#define         MEM_READ_OR_WRITE                                   0
-#define         IO_READ_OR_WRITE                                    1
-#define         CFG_READ_OR_WRITE                                   2
-#define     PCI_MASTER_START                                    5
-#define     PCI_MASTER_READ_WRITE                               4
-#define         PCI_MASTER_WRITE                                    0
-#define         PCI_MASTER_READ                                     1
-#define     PCI_MASTER_BYTE_WRITE_ENABLES                       0
-	u32		 pcimstaddr;
-	u32		 pcimstdata;
-	u32		 pcimststat;
-#define     PCI_ARBITER_CLEAR                                   2
-#define     PCI_EXTERNAL_ARBITER                                1
-#define     PCI_HOST_MODE                                       0
-} __attribute__ ((packed));
-
-/* dma control, BAR0 + 0x0180 ... array of four structs like this,
- * for channels 0..3.  see also struct net2280_dma:  descriptor
- * that can be loaded into some of these registers.
- */
-struct net2280_dma_regs {	/* [11.7] */
-	// offset 0x0180, 0x01a0, 0x01c0, 0x01e0, 
-	u32		dmactl;
-#define     DMA_SCATTER_GATHER_DONE_INTERRUPT_ENABLE            25
-#define     DMA_CLEAR_COUNT_ENABLE                              21
-#define     DESCRIPTOR_POLLING_RATE                             19
-#define         POLL_CONTINUOUS                                     0
-#define         POLL_1_USEC                                         1
-#define         POLL_100_USEC                                       2
-#define         POLL_1_MSEC                                         3
-#define     DMA_VALID_BIT_POLLING_ENABLE                        18
-#define     DMA_VALID_BIT_ENABLE                                17
-#define     DMA_SCATTER_GATHER_ENABLE                           16
-#define     DMA_OUT_AUTO_START_ENABLE                           4
-#define     DMA_PREEMPT_ENABLE                                  3
-#define     DMA_FIFO_VALIDATE                                   2
-#define     DMA_ENABLE                                          1
-#define     DMA_ADDRESS_HOLD                                    0
-	u32		dmastat;
-#define     DMA_SCATTER_GATHER_DONE_INTERRUPT                   25
-#define     DMA_TRANSACTION_DONE_INTERRUPT                      24
-#define     DMA_ABORT                                           1
-#define     DMA_START                                           0
-	u32		_unused0 [2];
-	// offset 0x0190, 0x01b0, 0x01d0, 0x01f0, 
-	u32		dmacount;
-#define     VALID_BIT                                           31
-#define     DMA_DIRECTION                                       30
-#define     DMA_DONE_INTERRUPT_ENABLE                           29
-#define     END_OF_CHAIN                                        28
-#define         DMA_BYTE_COUNT_MASK                                 ((1<<24)-1)
-#define     DMA_BYTE_COUNT                                      0
-	u32		dmaaddr;
-	u32		dmadesc;
-	u32		_unused1;
-} __attribute__ ((packed));
-
-/* dedicated endpoint registers, BAR0 + 0x0200 */
-
-struct net2280_dep_regs {	/* [11.8] */
-	// offset 0x0200, 0x0210, 0x220, 0x230, 0x240
-	u32		dep_cfg;
-	// offset 0x0204, 0x0214, 0x224, 0x234, 0x244
-	u32		dep_rsp;
-	u32		_unused [2];
-} __attribute__ ((packed));
-
-/* configurable endpoint registers, BAR0 + 0x0300 ... array of seven structs
- * like this, for ep0 then the configurable endpoints A..F
- * ep0 reserved for control; E and F have only 64 bytes of fifo
- */
-struct net2280_ep_regs {	/* [11.9] */
-	// offset 0x0300, 0x0320, 0x0340, 0x0360, 0x0380, 0x03a0, 0x03c0
-	u32		ep_cfg;
-#define     ENDPOINT_BYTE_COUNT                                 16
-#define     ENDPOINT_ENABLE                                     10
-#define     ENDPOINT_TYPE                                       8
-#define     ENDPOINT_DIRECTION                                  7
-#define     ENDPOINT_NUMBER                                     0
-	u32		ep_rsp;
-#define     SET_NAK_OUT_PACKETS                                 15
-#define     SET_EP_HIDE_STATUS_PHASE                            14
-#define     SET_EP_FORCE_CRC_ERROR                              13
-#define     SET_INTERRUPT_MODE                                  12
-#define     SET_CONTROL_STATUS_PHASE_HANDSHAKE                  11
-#define     SET_NAK_OUT_PACKETS_MODE                            10
-#define     SET_ENDPOINT_TOGGLE                                 9
-#define     SET_ENDPOINT_HALT                                   8
-#define     CLEAR_NAK_OUT_PACKETS                               7
-#define     CLEAR_EP_HIDE_STATUS_PHASE                          6
-#define     CLEAR_EP_FORCE_CRC_ERROR                            5
-#define     CLEAR_INTERRUPT_MODE                                4
-#define     CLEAR_CONTROL_STATUS_PHASE_HANDSHAKE                3
-#define     CLEAR_NAK_OUT_PACKETS_MODE                          2
-#define     CLEAR_ENDPOINT_TOGGLE                               1
-#define     CLEAR_ENDPOINT_HALT                                 0
-	u32		ep_irqenb;
-#define     SHORT_PACKET_OUT_DONE_INTERRUPT_ENABLE              6
-#define     SHORT_PACKET_TRANSFERRED_INTERRUPT_ENABLE           5
-#define     DATA_PACKET_RECEIVED_INTERRUPT_ENABLE               3
-#define     DATA_PACKET_TRANSMITTED_INTERRUPT_ENABLE            2
-#define     DATA_OUT_PING_TOKEN_INTERRUPT_ENABLE                1
-#define     DATA_IN_TOKEN_INTERRUPT_ENABLE                      0
-	u32		ep_stat;
-#define     FIFO_VALID_COUNT                                    24
-#define     HIGH_BANDWIDTH_OUT_TRANSACTION_PID                  22
-#define     TIMEOUT                                             21
-#define     USB_STALL_SENT                                      20
-#define     USB_IN_NAK_SENT                                     19
-#define     USB_IN_ACK_RCVD                                     18
-#define     USB_OUT_PING_NAK_SENT                               17
-#define     USB_OUT_ACK_SENT                                    16
-#define     FIFO_OVERFLOW                                       13
-#define     FIFO_UNDERFLOW                                      12
-#define     FIFO_FULL                                           11
-#define     FIFO_EMPTY                                          10
-#define     FIFO_FLUSH                                          9
-#define     SHORT_PACKET_OUT_DONE_INTERRUPT                     6
-#define     SHORT_PACKET_TRANSFERRED_INTERRUPT                  5
-#define     NAK_OUT_PACKETS                                     4
-#define     DATA_PACKET_RECEIVED_INTERRUPT                      3
-#define     DATA_PACKET_TRANSMITTED_INTERRUPT                   2
-#define     DATA_OUT_PING_TOKEN_INTERRUPT                       1
-#define     DATA_IN_TOKEN_INTERRUPT                             0
-	// offset 0x0310, 0x0330, 0x0350, 0x0370, 0x0390, 0x03b0, 0x03d0
-	u32		ep_avail;
-	u32		ep_data;
-	u32		_unused0 [2];
-} __attribute__ ((packed));
+#include <linux/usb/net2280.h>
 
 /*-------------------------------------------------------------------------*/
 
diff --git a/drivers/usb/gadget/zero.c b/drivers/usb/gadget/zero.c
index 51424f66a765..68e3d8f5da89 100644
--- a/drivers/usb/gadget/zero.c
+++ b/drivers/usb/gadget/zero.c
@@ -572,9 +572,10 @@ static void source_sink_complete (struct usb_ep *ep, struct usb_request *req)
 	switch (status) {
 
 	case 0: 			/* normal completion? */
-		if (ep == dev->out_ep)
+		if (ep == dev->out_ep) {
 			check_read_data (dev, ep, req);
-		else
+			memset (req->buf, 0x55, req->length);
+		} else
 			reinit_write_data (dev, ep, req);
 		break;
 
@@ -626,6 +627,8 @@ source_sink_start_ep (struct usb_ep *ep, gfp_t gfp_flags)
 
 	if (strcmp (ep->name, EP_IN_NAME) == 0)
 		reinit_write_data (ep->driver_data, ep, req);
+	else
+		memset (req->buf, 0x55, req->length);
 
 	status = usb_ep_queue (ep, req, gfp_flags);
 	if (status) {
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index 1e03f1a5a5fd..a1bd2bea6deb 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -350,7 +350,7 @@ static const struct hc_driver ehci_pci_hc_driver = {
 /* PCI driver selection metadata; PCI hotplugging uses this */
 static const struct pci_device_id pci_ids [] = { {
 	/* handle any USB 2.0 EHCI controller */
-	PCI_DEVICE_CLASS(((PCI_CLASS_SERIAL_USB << 8) | 0x20), ~0),
+	PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_EHCI, ~0),
 	.driver_data =	(unsigned long) &ehci_pci_hc_driver,
 	},
 	{ /* end: all zeroes */ }
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index 980030d684d5..6b7350b52419 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -20,7 +20,7 @@
 #include <asm/arch/board.h>
 
 #ifndef CONFIG_ARCH_AT91RM9200
-#error "This file is AT91RM9200 bus glue.  CONFIG_ARCH_AT91RM9200 must be defined."
+#error "CONFIG_ARCH_AT91RM9200 must be defined."
 #endif
 
 /* interface and function clocks */
@@ -84,8 +84,6 @@ static int usb_hcd_at91_remove (struct usb_hcd *, struct platform_device *);
  * Allocates basic resources for this USB host controller, and
  * then invokes the start() method for the HCD associated with it
  * through the hotplug entry's driver_data.
- *
- * Store this function in the HCD's struct pci_driver as probe().
  */
 int usb_hcd_at91_probe (const struct hc_driver *driver, struct platform_device *pdev)
 {
@@ -148,7 +146,6 @@ int usb_hcd_at91_probe (const struct hc_driver *driver, struct platform_device *
 }
 
 
-/* may be called without controller electrically present */
 /* may be called with controller, bus, and devices active */
 
 /**
@@ -166,11 +163,11 @@ static int usb_hcd_at91_remove (struct usb_hcd *hcd, struct platform_device *pde
 	usb_remove_hcd(hcd);
 	at91_stop_hc(pdev);
 	iounmap(hcd->regs);
- 	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
 
- 	clk_put(fclk);
- 	clk_put(iclk);
- 	fclk = iclk = NULL;
+	clk_put(fclk);
+	clk_put(iclk);
+	fclk = iclk = NULL;
 
 	dev_set_drvdata(&pdev->dev, NULL);
 	return 0;
@@ -235,8 +232,8 @@ static const struct hc_driver ohci_at91_hc_driver = {
 	.hub_control =		ohci_hub_control,
 
 #ifdef CONFIG_PM
-	.hub_suspend =		ohci_hub_suspend,
-	.hub_resume =		ohci_hub_resume,
+	.bus_suspend =		ohci_bus_suspend,
+	.bus_resume =		ohci_bus_resume,
 #endif
 	.start_port_reset =	ohci_start_port_reset,
 };
@@ -254,21 +251,21 @@ static int ohci_hcd_at91_drv_remove(struct platform_device *dev)
 }
 
 #ifdef CONFIG_PM
-static int ohci_hcd_at91_drv_suspend(struct platform_device *dev, u32 state, u32 level)
-{
-	printk("%s(%s:%d): not implemented yet\n",
-		__func__, __FILE__, __LINE__);
 
+/* REVISIT suspend/resume look "too" simple here */
+
+static int
+ohci_hcd_at91_drv_suspend(struct platform_device *dev, pm_message_t mesg)
+{
 	clk_disable(fclk);
+	clk_disable(iclk);
 
 	return 0;
 }
 
-static int ohci_hcd_at91_drv_resume(struct platform_device *dev, u32 state)
+static int ohci_hcd_at91_drv_resume(struct platform_device *dev)
 {
-	printk("%s(%s:%d): not implemented yet\n",
-		__func__, __FILE__, __LINE__);
-
+	clk_enable(iclk);
 	clk_enable(fclk);
 
 	return 0;
@@ -278,6 +275,8 @@ static int ohci_hcd_at91_drv_resume(struct platform_device *dev, u32 state)
 #define ohci_hcd_at91_drv_resume  NULL
 #endif
 
+MODULE_ALIAS("at91rm9200-ohci");
+
 static struct platform_driver ohci_hcd_at91_driver = {
 	.probe		= ohci_hcd_at91_drv_probe,
 	.remove		= ohci_hcd_at91_drv_remove,
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 544f7589912f..73f5a379d9b3 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -863,7 +863,7 @@ static int ohci_restart (struct ohci_hcd *ohci)
 		i = ohci->num_ports;
 		while (i--)
 			ohci_writel (ohci, RH_PS_PSS,
-				&ohci->regs->roothub.portstatus [temp]);
+				&ohci->regs->roothub.portstatus [i]);
 		ohci_dbg (ohci, "restart complete\n");
 	}
 	return 0;
diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c
index 1bfe96f4d045..b268537e389e 100644
--- a/drivers/usb/host/ohci-pci.c
+++ b/drivers/usb/host/ohci-pci.c
@@ -206,7 +206,7 @@ static const struct hc_driver ohci_pci_hc_driver = {
 
 static const struct pci_device_id pci_ids [] = { {
 	/* handle any USB OHCI controller */
-	PCI_DEVICE_CLASS((PCI_CLASS_SERIAL_USB << 8) | 0x10, ~0),
+	PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_OHCI, ~0),
 	.driver_data =	(unsigned long) &ohci_pci_hc_driver,
 	}, { /* end: all zeroes */ }
 };
diff --git a/drivers/usb/host/ohci-s3c2410.c b/drivers/usb/host/ohci-s3c2410.c
index 682bf2215660..1da5de573a6f 100644
--- a/drivers/usb/host/ohci-s3c2410.c
+++ b/drivers/usb/host/ohci-s3c2410.c
@@ -30,6 +30,7 @@
 /* clock device associated with the hcd */
 
 static struct clk *clk;
+static struct clk *usb_clk;
 
 /* forward definitions */
 
@@ -37,7 +38,7 @@ static void s3c2410_hcd_oc(struct s3c2410_hcd_info *info, int port_oc);
 
 /* conversion functions */
 
-struct s3c2410_hcd_info *to_s3c2410_info(struct usb_hcd *hcd)
+static struct s3c2410_hcd_info *to_s3c2410_info(struct usb_hcd *hcd)
 {
 	return hcd->self.controller->platform_data;
 }
@@ -47,6 +48,10 @@ static void s3c2410_start_hc(struct platform_device *dev, struct usb_hcd *hcd)
 	struct s3c2410_hcd_info *info = dev->dev.platform_data;
 
 	dev_dbg(&dev->dev, "s3c2410_start_hc:\n");
+
+	clk_enable(usb_clk);
+	mdelay(2);			/* let the bus clock stabilise */
+
 	clk_enable(clk);
 
 	if (info != NULL) {
@@ -75,6 +80,7 @@ static void s3c2410_stop_hc(struct platform_device *dev)
 	}
 
 	clk_disable(clk);
+	clk_disable(usb_clk);
 }
 
 /* ohci_s3c2410_hub_status_data
@@ -316,7 +322,8 @@ static void s3c2410_hcd_oc(struct s3c2410_hcd_info *info, int port_oc)
  *
 */
 
-void usb_hcd_s3c2410_remove (struct usb_hcd *hcd, struct platform_device *dev)
+static void
+usb_hcd_s3c2410_remove (struct usb_hcd *hcd, struct platform_device *dev)
 {
 	usb_remove_hcd(hcd);
 	s3c2410_stop_hc(dev);
@@ -334,8 +341,8 @@ void usb_hcd_s3c2410_remove (struct usb_hcd *hcd, struct platform_device *dev)
  * through the hotplug entry's driver_data.
  *
  */
-int usb_hcd_s3c2410_probe (const struct hc_driver *driver,
-			   struct platform_device *dev)
+static int usb_hcd_s3c2410_probe (const struct hc_driver *driver,
+				  struct platform_device *dev)
 {
 	struct usb_hcd *hcd = NULL;
 	int retval;
@@ -353,14 +360,21 @@ int usb_hcd_s3c2410_probe (const struct hc_driver *driver,
 	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
 		dev_err(&dev->dev, "request_mem_region failed");
 		retval = -EBUSY;
-		goto err0;
+		goto err_put;
 	}
 
-	clk = clk_get(NULL, "usb-host");
+	clk = clk_get(&dev->dev, "usb-host");
 	if (IS_ERR(clk)) {
 		dev_err(&dev->dev, "cannot get usb-host clock\n");
 		retval = -ENOENT;
-		goto err1;
+		goto err_mem;
+	}
+
+	usb_clk = clk_get(&dev->dev, "upll");
+	if (IS_ERR(usb_clk)) {
+		dev_err(&dev->dev, "cannot get usb-host clock\n");
+		retval = -ENOENT;
+		goto err_clk;
 	}
 
 	s3c2410_start_hc(dev, hcd);
@@ -369,26 +383,29 @@ int usb_hcd_s3c2410_probe (const struct hc_driver *driver,
 	if (!hcd->regs) {
 		dev_err(&dev->dev, "ioremap failed\n");
 		retval = -ENOMEM;
-		goto err2;
+		goto err_ioremap;
 	}
 
 	ohci_hcd_init(hcd_to_ohci(hcd));
 
 	retval = usb_add_hcd(hcd, dev->resource[1].start, SA_INTERRUPT);
 	if (retval != 0)
-		goto err2;
+		goto err_ioremap;
 
 	return 0;
 
- err2:
+ err_ioremap:
 	s3c2410_stop_hc(dev);
 	iounmap(hcd->regs);
+	clk_put(usb_clk);
+
+ err_clk:
 	clk_put(clk);
 
- err1:
+ err_mem:
 	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
 
- err0:
+ err_put:
 	usb_put_hcd(hcd);
 	return retval;
 }
diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index 9e81c26313f9..1045f846fbe2 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -15,6 +15,7 @@
 #include <linux/init.h>
 #include <linux/delay.h>
 #include <linux/acpi.h>
+#include "pci-quirks.h"
 
 
 #define UHCI_USBLEGSUP		0xc0		/* legacy support */
diff --git a/drivers/usb/host/pci-quirks.h b/drivers/usb/host/pci-quirks.h
new file mode 100644
index 000000000000..1564edfff6fe
--- /dev/null
+++ b/drivers/usb/host/pci-quirks.h
@@ -0,0 +1,7 @@
+#ifndef __LINUX_USB_PCI_QUIRKS_H
+#define __LINUX_USB_PCI_QUIRKS_H
+
+void uhci_reset_hc(struct pci_dev *pdev, unsigned long base);
+int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base);
+
+#endif  /*  __LINUX_USB_PCI_QUIRKS_H  */
diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c
index 4edb8330c440..d225e11f4055 100644
--- a/drivers/usb/host/uhci-hcd.c
+++ b/drivers/usb/host/uhci-hcd.c
@@ -50,6 +50,7 @@
 
 #include "../core/hcd.h"
 #include "uhci-hcd.h"
+#include "pci-quirks.h"
 
 /*
  * Version Information
@@ -100,9 +101,6 @@ static void uhci_get_current_frame_number(struct uhci_hcd *uhci);
 #include "uhci-q.c"
 #include "uhci-hub.c"
 
-extern void uhci_reset_hc(struct pci_dev *pdev, unsigned long base);
-extern int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base);
-
 /*
  * Finish up a host controller reset and update the recorded state.
  */
@@ -117,8 +115,7 @@ static void finish_reset(struct uhci_hcd *uhci)
 	for (port = 0; port < uhci->rh_numports; ++port)
 		outw(0, uhci->io_addr + USBPORTSC1 + (port * 2));
 
-	uhci->port_c_suspend = uhci->suspended_ports =
-			uhci->resuming_ports = 0;
+	uhci->port_c_suspend = uhci->resuming_ports = 0;
 	uhci->rh_state = UHCI_RH_RESET;
 	uhci->is_stopped = UHCI_IS_STOPPED;
 	uhci_to_hcd(uhci)->state = HC_STATE_HALT;
@@ -861,7 +858,7 @@ static const struct hc_driver uhci_driver = {
 
 static const struct pci_device_id uhci_pci_ids[] = { {
 	/* handle any USB UHCI controller */
-	PCI_DEVICE_CLASS(((PCI_CLASS_SERIAL_USB << 8) | 0x00), ~0),
+	PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_UHCI, ~0),
 	.driver_data =	(unsigned long) &uhci_driver,
 	}, { /* end: all zeroes */ }
 };
diff --git a/drivers/usb/host/uhci-hcd.h b/drivers/usb/host/uhci-hcd.h
index 4a69c7eb09bd..d5c8f4d92823 100644
--- a/drivers/usb/host/uhci-hcd.h
+++ b/drivers/usb/host/uhci-hcd.h
@@ -415,7 +415,6 @@ struct uhci_hcd {
 
 	/* Support for port suspend/resume/reset */
 	unsigned long port_c_suspend;		/* Bit-arrays of ports */
-	unsigned long suspended_ports;
 	unsigned long resuming_ports;
 	unsigned long ports_timeout;		/* Time to stop signalling */
 
diff --git a/drivers/usb/host/uhci-hub.c b/drivers/usb/host/uhci-hub.c
index 152971d16769..c8451d9578f1 100644
--- a/drivers/usb/host/uhci-hub.c
+++ b/drivers/usb/host/uhci-hub.c
@@ -85,11 +85,10 @@ static void uhci_finish_suspend(struct uhci_hcd *uhci, int port,
 {
 	int status;
 
-	if (test_bit(port, &uhci->suspended_ports)) {
+	if (inw(port_addr) & (USBPORTSC_SUSP | USBPORTSC_RD)) {
 		CLR_RH_PORTSTAT(USBPORTSC_SUSP | USBPORTSC_RD);
-		clear_bit(port, &uhci->suspended_ports);
-		clear_bit(port, &uhci->resuming_ports);
-		set_bit(port, &uhci->port_c_suspend);
+		if (test_bit(port, &uhci->resuming_ports))
+			set_bit(port, &uhci->port_c_suspend);
 
 		/* The controller won't actually turn off the RD bit until
 		 * it has had a chance to send a low-speed EOP sequence,
@@ -97,6 +96,7 @@ static void uhci_finish_suspend(struct uhci_hcd *uhci, int port,
 		 * slightly longer for good luck. */
 		udelay(4);
 	}
+	clear_bit(port, &uhci->resuming_ports);
 }
 
 /* Wait for the UHCI controller in HP's iLO2 server management chip.
@@ -265,8 +265,6 @@ static int uhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 			wPortChange |= USB_PORT_STAT_C_SUSPEND;
 			lstatus |= 1;
 		}
-		if (test_bit(port, &uhci->suspended_ports))
-			lstatus |= 2;
 		if (test_bit(port, &uhci->resuming_ports))
 			lstatus |= 4;
 
@@ -309,7 +307,6 @@ static int uhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 
 		switch (wValue) {
 		case USB_PORT_FEAT_SUSPEND:
-			set_bit(port, &uhci->suspended_ports);
 			SET_RH_PORTSTAT(USBPORTSC_SUSP);
 			OK(0);
 		case USB_PORT_FEAT_RESET:
@@ -343,8 +340,11 @@ static int uhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 			CLR_RH_PORTSTAT(USBPORTSC_PEC);
 			OK(0);
 		case USB_PORT_FEAT_SUSPEND:
-			if (test_bit(port, &uhci->suspended_ports) &&
-					!test_and_set_bit(port,
+			if (!(inw(port_addr) & USBPORTSC_SUSP)) {
+
+				/* Make certain the port isn't suspended */
+				uhci_finish_suspend(uhci, port, port_addr);
+			} else if (!test_and_set_bit(port,
 						&uhci->resuming_ports)) {
 				SET_RH_PORTSTAT(USBPORTSC_RD);
 
diff --git a/drivers/usb/input/Kconfig b/drivers/usb/input/Kconfig
index 5246b35301de..650103bc9618 100644
--- a/drivers/usb/input/Kconfig
+++ b/drivers/usb/input/Kconfig
@@ -200,45 +200,41 @@ config USB_POWERMATE
 	  To compile this driver as a module, choose M here: the
 	  module will be called powermate.
 
-config USB_MTOUCH
-	tristate "MicroTouch USB Touchscreen Driver"
+config USB_TOUCHSCREEN
+	tristate "USB Touchscreen Driver"
 	depends on USB && INPUT
 	---help---
-	  Say Y here if you want to use a MicroTouch (Now 3M) USB 
-	  Touchscreen controller.
+	  USB Touchscreen driver for:
+	  - eGalax Touchkit USB
+	  - PanJit TouchSet USB
+	  - 3M MicroTouch USB
+	  - ITM
 
-	  See <file:Documentation/usb/mtouch.txt> for additional information.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called mtouchusb.
-
-config USB_ITMTOUCH
-	tristate "ITM Touch USB Touchscreen Driver"
-	depends on USB && INPUT
-	---help---
-	  Say Y here if you want to use a ITM Touch USB
-	  Touchscreen controller.
-
-	  This touchscreen is used in LG 1510SF monitors.
+	  Have a look at <http://linux.chapter7.ch/touchkit/> for
+	  a usage description and the required user-space stuff.
 
 	  To compile this driver as a module, choose M here: the
-	  module will be called itmtouch.
+	  module will be called usbtouchscreen.
 
-config USB_EGALAX
-	tristate "eGalax TouchKit USB Touchscreen Driver"
-	depends on USB && INPUT
-	---help---
-	  Say Y here if you want to use a eGalax TouchKit USB
-	  Touchscreen controller.
+config USB_TOUCHSCREEN_EGALAX
+	default y
+	bool "eGalax device support" if EMBEDDED
+	depends on USB_TOUCHSCREEN
 
-	  The driver has been tested on a Xenarc 700TSV monitor
-	  with eGalax touchscreen.
+config USB_TOUCHSCREEN_PANJIT
+	default y
+	bool "PanJit device support" if EMBEDDED
+	depends on USB_TOUCHSCREEN
 
-	  Have a look at <http://linux.chapter7.ch/touchkit/> for
-	  a usage description and the required user-space stuff.
+config USB_TOUCHSCREEN_3M
+	default y
+	bool "3M/Microtouch device support" if EMBEDDED
+	depends on USB_TOUCHSCREEN
 
-	  To compile this driver as a module, choose M here: the
-	  module will be called touchkitusb.
+config USB_TOUCHSCREEN_ITM
+	default y
+	bool "ITM device support" if EMBEDDED
+	depends on USB_TOUCHSCREEN
 
 config USB_YEALINK
 	tristate "Yealink usb-p1k voip phone"
diff --git a/drivers/usb/input/Makefile b/drivers/usb/input/Makefile
index d512d9f488fe..764114529c56 100644
--- a/drivers/usb/input/Makefile
+++ b/drivers/usb/input/Makefile
@@ -37,6 +37,7 @@ obj-$(CONFIG_USB_MOUSE)		+= usbmouse.o
 obj-$(CONFIG_USB_MTOUCH)	+= mtouchusb.o
 obj-$(CONFIG_USB_ITMTOUCH)	+= itmtouch.o
 obj-$(CONFIG_USB_EGALAX)	+= touchkitusb.o
+obj-$(CONFIG_USB_TOUCHSCREEN)	+= usbtouchscreen.o
 obj-$(CONFIG_USB_POWERMATE)	+= powermate.o
 obj-$(CONFIG_USB_WACOM)		+= wacom.o
 obj-$(CONFIG_USB_ACECAD)	+= acecad.o
diff --git a/drivers/usb/input/hid-core.c b/drivers/usb/input/hid-core.c
index d4bf1701046b..435273e7c85c 100644
--- a/drivers/usb/input/hid-core.c
+++ b/drivers/usb/input/hid-core.c
@@ -1372,6 +1372,11 @@ void hid_close(struct hid_device *hid)
 		usb_kill_urb(hid->urbin);
 }
 
+#define USB_VENDOR_ID_PANJIT		0x134c
+
+#define USB_VENDOR_ID_SILVERCREST	0x062a
+#define USB_DEVICE_ID_SILVERCREST_KB	0x0201
+
 /*
  * Initialize all reports
  */
@@ -1552,6 +1557,9 @@ void hid_init_reports(struct hid_device *hid)
 #define USB_VENDOR_ID_HP		0x03f0
 #define USB_DEVICE_ID_HP_USBHUB_KB	0x020c
 
+#define USB_VENDOR_ID_IBM		0x04b3
+#define USB_DEVICE_ID_IBM_USBHUB_KB	0x3005
+
 #define USB_VENDOR_ID_CREATIVELABS	0x062a
 #define USB_DEVICE_ID_CREATIVELABS_SILVERCREST	0x0201
 
@@ -1655,9 +1663,12 @@ static const struct hid_blacklist {
 	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS3, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS3 + 1, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS3 + 2, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS3 + 3, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS3 + 4, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS3 + 5, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_CINTIQ, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_DTF, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_DTF + 3, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_4_PHIDGETSERVO_20, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_1_PHIDGETSERVO_20, HID_QUIRK_IGNORE },
 
@@ -1673,8 +1684,10 @@ static const struct hid_blacklist {
 	{ USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_USBHUB_KB, HID_QUIRK_NOGET},
 	{ USB_VENDOR_ID_CREATIVELABS, USB_DEVICE_ID_CREATIVELABS_SILVERCREST, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_HP, USB_DEVICE_ID_HP_USBHUB_KB, HID_QUIRK_NOGET },
+	{ USB_VENDOR_ID_IBM, USB_DEVICE_ID_IBM_USBHUB_KB, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_TANGTOP, USB_DEVICE_ID_TANGTOP_USBPS2, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_DUAL_USB_JOYPAD, HID_QUIRK_NOGET | HID_QUIRK_MULTI_INPUT },
+	{ USB_VENDOR_ID_SILVERCREST, USB_DEVICE_ID_SILVERCREST_KB, HID_QUIRK_NOGET },
 
 	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_POWERMOUSE, HID_QUIRK_2WHEEL_POWERMOUSE },
 	{ USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_WCP32PU, HID_QUIRK_2WHEEL_MOUSE_HACK_7 },
@@ -1701,6 +1714,11 @@ static const struct hid_blacklist {
 	{ USB_VENDOR_ID_APPLE, 0x030A, HID_QUIRK_POWERBOOK_HAS_FN },
 	{ USB_VENDOR_ID_APPLE, 0x030B, HID_QUIRK_POWERBOOK_HAS_FN },
 
+	{ USB_VENDOR_ID_PANJIT, 0x0001, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_PANJIT, 0x0002, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_PANJIT, 0x0003, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_PANJIT, 0x0004, HID_QUIRK_IGNORE },
+
 	{ 0, 0 }
 };
 
diff --git a/drivers/usb/input/hid-ff.c b/drivers/usb/input/hid-ff.c
index 72e698658b53..d5c91ee67991 100644
--- a/drivers/usb/input/hid-ff.c
+++ b/drivers/usb/input/hid-ff.c
@@ -34,12 +34,6 @@
 
 #include "hid.h"
 
-/* Drivers' initializing functions */
-extern int hid_lgff_init(struct hid_device* hid);
-extern int hid_lg3d_init(struct hid_device* hid);
-extern int hid_pid_init(struct hid_device* hid);
-extern int hid_tmff_init(struct hid_device* hid);
-
 /*
  * This table contains pointers to initializers. To add support for new
  * devices, you need to add the USB vendor and product ids here.
diff --git a/drivers/usb/input/hid.h b/drivers/usb/input/hid.h
index 4e1b784fe527..9c62837b5b89 100644
--- a/drivers/usb/input/hid.h
+++ b/drivers/usb/input/hid.h
@@ -533,3 +533,8 @@ static inline int hid_ff_event(struct hid_device *hid, struct input_dev *input,
 		return hid->ff_event(hid, input, type, code, value);
 	return -ENOSYS;
 }
+
+int hid_lgff_init(struct hid_device* hid);
+int hid_tmff_init(struct hid_device* hid);
+int hid_pid_init(struct hid_device* hid);
+
diff --git a/drivers/usb/input/hiddev.c b/drivers/usb/input/hiddev.c
index 6dd666696178..c4670e1d4654 100644
--- a/drivers/usb/input/hiddev.c
+++ b/drivers/usb/input/hiddev.c
@@ -317,6 +317,7 @@ static ssize_t hiddev_read(struct file * file, char __user * buffer, size_t coun
 				}
 
 				schedule();
+				set_current_state(TASK_INTERRUPTIBLE);
 			}
 
 			set_current_state(TASK_RUNNING);
diff --git a/drivers/usb/input/keyspan_remote.c b/drivers/usb/input/keyspan_remote.c
index b4a051b549d1..3d911976f378 100644
--- a/drivers/usb/input/keyspan_remote.c
+++ b/drivers/usb/input/keyspan_remote.c
@@ -297,6 +297,8 @@ static void keyspan_check_data(struct usb_keyspan *remote, struct pt_regs *regs)
 			remote->data.bits_left -= 6;
 		} else {
 			err("%s - Error in message, invalid toggle.\n", __FUNCTION__);
+			remote->stage = 0;
+			return;
 		}
 
 		keyspan_load_tester(remote, 5);
diff --git a/drivers/usb/input/usbtouchscreen.c b/drivers/usb/input/usbtouchscreen.c
new file mode 100644
index 000000000000..e9a07c1e905b
--- /dev/null
+++ b/drivers/usb/input/usbtouchscreen.c
@@ -0,0 +1,605 @@
+/******************************************************************************
+ * usbtouchscreen.c
+ * Driver for USB Touchscreens, supporting those devices:
+ *  - eGalax Touchkit
+ *  - 3M/Microtouch
+ *  - ITM
+ *  - PanJit TouchSet
+ *
+ * Copyright (C) 2004-2006 by Daniel Ritz <daniel.ritz@gmx.ch>
+ * Copyright (C) by Todd E. Johnson (mtouchusb.c)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Driver is based on touchkitusb.c
+ * - ITM parts are from itmtouch.c
+ * - 3M parts are from mtouchusb.c
+ * - PanJit parts are from an unmerged driver by Lanslott Gish
+ *
+ *****************************************************************************/
+
+//#define DEBUG
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/usb.h>
+#include <linux/usb_input.h>
+
+
+#define DRIVER_VERSION		"v0.3"
+#define DRIVER_AUTHOR		"Daniel Ritz <daniel.ritz@gmx.ch>"
+#define DRIVER_DESC		"USB Touchscreen Driver"
+
+static int swap_xy;
+module_param(swap_xy, bool, 0644);
+MODULE_PARM_DESC(swap_xy, "If set X and Y axes are swapped.");
+
+/* device specifc data/functions */
+struct usbtouch_usb;
+struct usbtouch_device_info {
+	int min_xc, max_xc;
+	int min_yc, max_yc;
+	int min_press, max_press;
+	int rept_size;
+	int flags;
+
+	void (*process_pkt) (struct usbtouch_usb *usbtouch, struct pt_regs *regs, unsigned char *pkt, int len);
+	int  (*read_data)   (unsigned char *pkt, int *x, int *y, int *touch, int *press);
+	int  (*init)        (struct usbtouch_usb *usbtouch);
+};
+
+#define USBTOUCH_FLG_BUFFER	0x01
+
+
+/* a usbtouch device */
+struct usbtouch_usb {
+	unsigned char *data;
+	dma_addr_t data_dma;
+	unsigned char *buffer;
+	int buf_len;
+	struct urb *irq;
+	struct usb_device *udev;
+	struct input_dev *input;
+	struct usbtouch_device_info *type;
+	char name[128];
+	char phys[64];
+};
+
+static void usbtouch_process_pkt(struct usbtouch_usb *usbtouch,
+                                 struct pt_regs *regs, unsigned char *pkt, int len);
+
+/* device types */
+enum {
+	DEVTPYE_DUMMY = -1,
+	DEVTYPE_EGALAX,
+	DEVTYPE_PANJIT,
+	DEVTYPE_3M,
+	DEVTYPE_ITM,
+};
+
+static struct usb_device_id usbtouch_devices[] = {
+#ifdef CONFIG_USB_TOUCHSCREEN_EGALAX
+	{USB_DEVICE(0x3823, 0x0001), .driver_info = DEVTYPE_EGALAX},
+	{USB_DEVICE(0x0123, 0x0001), .driver_info = DEVTYPE_EGALAX},
+	{USB_DEVICE(0x0eef, 0x0001), .driver_info = DEVTYPE_EGALAX},
+	{USB_DEVICE(0x0eef, 0x0002), .driver_info = DEVTYPE_EGALAX},
+#endif
+
+#ifdef CONFIG_USB_TOUCHSCREEN_PANJIT
+	{USB_DEVICE(0x134c, 0x0001), .driver_info = DEVTYPE_PANJIT},
+	{USB_DEVICE(0x134c, 0x0002), .driver_info = DEVTYPE_PANJIT},
+	{USB_DEVICE(0x134c, 0x0003), .driver_info = DEVTYPE_PANJIT},
+	{USB_DEVICE(0x134c, 0x0004), .driver_info = DEVTYPE_PANJIT},
+#endif
+
+#ifdef CONFIG_USB_TOUCHSCREEN_3M
+	{USB_DEVICE(0x0596, 0x0001), .driver_info = DEVTYPE_3M},
+#endif
+
+#ifdef CONFIG_USB_TOUCHSCREEN_ITM
+	{USB_DEVICE(0x0403, 0xf9e9), .driver_info = DEVTYPE_ITM},
+#endif
+
+	{}
+};
+
+
+/*****************************************************************************
+ * eGalax part
+ */
+
+#ifdef CONFIG_USB_TOUCHSCREEN_EGALAX
+
+#define EGALAX_PKT_TYPE_MASK		0xFE
+#define EGALAX_PKT_TYPE_REPT		0x80
+#define EGALAX_PKT_TYPE_DIAG		0x0A
+
+static int egalax_read_data(unsigned char *pkt, int *x, int *y, int *touch, int *press)
+{
+	if ((pkt[0] & EGALAX_PKT_TYPE_MASK) != EGALAX_PKT_TYPE_REPT)
+		return 0;
+
+	*x = ((pkt[3] & 0x0F) << 7) | (pkt[4] & 0x7F);
+	*y = ((pkt[1] & 0x0F) << 7) | (pkt[2] & 0x7F);
+	*touch = pkt[0] & 0x01;
+
+	return 1;
+
+}
+
+static int egalax_get_pkt_len(unsigned char *buf)
+{
+	switch (buf[0] & EGALAX_PKT_TYPE_MASK) {
+	case EGALAX_PKT_TYPE_REPT:
+		return 5;
+
+	case EGALAX_PKT_TYPE_DIAG:
+		return buf[1] + 2;
+	}
+
+	return 0;
+}
+
+static void egalax_process(struct usbtouch_usb *usbtouch, struct pt_regs *regs,
+                           unsigned char *pkt, int len)
+{
+	unsigned char *buffer;
+	int pkt_len, buf_len, pos;
+
+	/* if the buffer contains data, append */
+	if (unlikely(usbtouch->buf_len)) {
+		int tmp;
+
+		/* if only 1 byte in buffer, add another one to get length */
+		if (usbtouch->buf_len == 1)
+			usbtouch->buffer[1] = pkt[0];
+
+		pkt_len = egalax_get_pkt_len(usbtouch->buffer);
+
+		/* unknown packet: drop everything */
+		if (!pkt_len)
+			return;
+
+		/* append, process */
+		tmp = pkt_len - usbtouch->buf_len;
+		memcpy(usbtouch->buffer + usbtouch->buf_len, pkt, tmp);
+		usbtouch_process_pkt(usbtouch, regs, usbtouch->buffer, pkt_len);
+
+		buffer = pkt + tmp;
+		buf_len = len - tmp;
+	} else {
+		buffer = pkt;
+		buf_len = len;
+	}
+
+	/* only one byte left in buffer */
+	if (unlikely(buf_len == 1)) {
+		usbtouch->buffer[0] = buffer[0];
+		usbtouch->buf_len = 1;
+		return;
+	}
+
+	/* loop over the buffer */
+	pos = 0;
+	while (pos < buf_len) {
+		/* get packet len */
+		pkt_len = egalax_get_pkt_len(buffer + pos);
+
+		/* unknown packet: drop everything */
+		if (unlikely(!pkt_len))
+			return;
+
+		/* full packet: process */
+		if (likely(pkt_len <= buf_len)) {
+			usbtouch_process_pkt(usbtouch, regs, buffer + pos, pkt_len);
+		} else {
+			/* incomplete packet: save in buffer */
+			memcpy(usbtouch->buffer, buffer + pos, buf_len - pos);
+			usbtouch->buf_len = buf_len - pos;
+		}
+		pos += pkt_len;
+	}
+}
+#endif
+
+
+/*****************************************************************************
+ * PanJit Part
+ */
+#ifdef CONFIG_USB_TOUCHSCREEN_PANJIT
+static int panjit_read_data(unsigned char *pkt, int *x, int *y, int *touch, int *press)
+{
+	*x = ((pkt[2] & 0x0F) << 8) | pkt[1];
+	*y = ((pkt[4] & 0x0F) << 8) | pkt[3];
+	*touch = pkt[0] & 0x01;
+
+	return 1;
+}
+#endif
+
+
+/*****************************************************************************
+ * 3M/Microtouch Part
+ */
+#ifdef CONFIG_USB_TOUCHSCREEN_3M
+
+#define MTOUCHUSB_ASYNC_REPORT          1
+#define MTOUCHUSB_RESET                 7
+#define MTOUCHUSB_REQ_CTRLLR_ID         10
+
+static int mtouch_read_data(unsigned char *pkt, int *x, int *y, int *touch, int *press)
+{
+	*x = (pkt[8] << 8) | pkt[7];
+	*y = (pkt[10] << 8) | pkt[9];
+	*touch = (pkt[2] & 0x40) ? 1 : 0;
+
+	return 1;
+}
+
+static int mtouch_init(struct usbtouch_usb *usbtouch)
+{
+	int ret;
+
+	ret = usb_control_msg(usbtouch->udev, usb_rcvctrlpipe(usbtouch->udev, 0),
+	                      MTOUCHUSB_RESET,
+	                      USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+	                      1, 0, NULL, 0, USB_CTRL_SET_TIMEOUT);
+	dbg("%s - usb_control_msg - MTOUCHUSB_RESET - bytes|err: %d",
+	    __FUNCTION__, ret);
+	if (ret < 0)
+		return ret;
+
+	ret = usb_control_msg(usbtouch->udev, usb_rcvctrlpipe(usbtouch->udev, 0),
+	                      MTOUCHUSB_ASYNC_REPORT,
+	                      USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+	                      1, 1, NULL, 0, USB_CTRL_SET_TIMEOUT);
+	dbg("%s - usb_control_msg - MTOUCHUSB_ASYNC_REPORT - bytes|err: %d",
+	    __FUNCTION__, ret);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+#endif
+
+
+/*****************************************************************************
+ * ITM Part
+ */
+#ifdef CONFIG_USB_TOUCHSCREEN_ITM
+static int itm_read_data(unsigned char *pkt, int *x, int *y, int *touch, int *press)
+{
+	*x = ((pkt[0] & 0x1F) << 7) | (pkt[3] & 0x7F);
+	*x = ((pkt[1] & 0x1F) << 7) | (pkt[4] & 0x7F);
+	*press = ((pkt[2] & 0x1F) << 7) | (pkt[5] & 0x7F);
+	*touch = ~pkt[7] & 0x20;
+
+	return 1;
+}
+#endif
+
+
+/*****************************************************************************
+ * the different device descriptors
+ */
+static struct usbtouch_device_info usbtouch_dev_info[] = {
+#ifdef CONFIG_USB_TOUCHSCREEN_EGALAX
+	[DEVTYPE_EGALAX] = {
+		.min_xc		= 0x0,
+		.max_xc		= 0x07ff,
+		.min_yc		= 0x0,
+		.max_yc		= 0x07ff,
+		.rept_size	= 16,
+		.flags		= USBTOUCH_FLG_BUFFER,
+		.process_pkt	= egalax_process,
+		.read_data	= egalax_read_data,
+	},
+#endif
+
+#ifdef CONFIG_USB_TOUCHSCREEN_PANJIT
+	[DEVTYPE_PANJIT] = {
+		.min_xc		= 0x0,
+		.max_xc		= 0x0fff,
+		.min_yc		= 0x0,
+		.max_yc		= 0x0fff,
+		.rept_size	= 8,
+		.read_data	= panjit_read_data,
+	},
+#endif
+
+#ifdef CONFIG_USB_TOUCHSCREEN_3M
+	[DEVTYPE_3M] = {
+		.min_xc		= 0x0,
+		.max_xc		= 0x4000,
+		.min_yc		= 0x0,
+		.max_yc		= 0x4000,
+		.rept_size	= 11,
+		.read_data	= mtouch_read_data,
+		.init		= mtouch_init,
+	},
+#endif
+
+#ifdef CONFIG_USB_TOUCHSCREEN_ITM
+	[DEVTYPE_ITM] = {
+		.min_xc		= 0x0,
+		.max_xc		= 0x0fff,
+		.min_yc		= 0x0,
+		.max_yc		= 0x0fff,
+		.max_press	= 0xff,
+		.rept_size	= 8,
+		.read_data	= itm_read_data,
+	},
+#endif
+};
+
+
+/*****************************************************************************
+ * Generic Part
+ */
+static void usbtouch_process_pkt(struct usbtouch_usb *usbtouch,
+                                 struct pt_regs *regs, unsigned char *pkt, int len)
+{
+	int x, y, touch, press;
+	struct usbtouch_device_info *type = usbtouch->type;
+
+	if (!type->read_data(pkt, &x, &y, &touch, &press))
+			return;
+
+	input_regs(usbtouch->input, regs);
+	input_report_key(usbtouch->input, BTN_TOUCH, touch);
+
+	if (swap_xy) {
+		input_report_abs(usbtouch->input, ABS_X, y);
+		input_report_abs(usbtouch->input, ABS_Y, x);
+	} else {
+		input_report_abs(usbtouch->input, ABS_X, x);
+		input_report_abs(usbtouch->input, ABS_Y, y);
+	}
+	if (type->max_press)
+		input_report_abs(usbtouch->input, ABS_PRESSURE, press);
+	input_sync(usbtouch->input);
+}
+
+
+static void usbtouch_irq(struct urb *urb, struct pt_regs *regs)
+{
+	struct usbtouch_usb *usbtouch = urb->context;
+	int retval;
+
+	switch (urb->status) {
+	case 0:
+		/* success */
+		break;
+	case -ETIMEDOUT:
+		/* this urb is timing out */
+		dbg("%s - urb timed out - was the device unplugged?",
+		    __FUNCTION__);
+		return;
+	case -ECONNRESET:
+	case -ENOENT:
+	case -ESHUTDOWN:
+		/* this urb is terminated, clean up */
+		dbg("%s - urb shutting down with status: %d",
+		    __FUNCTION__, urb->status);
+		return;
+	default:
+		dbg("%s - nonzero urb status received: %d",
+		    __FUNCTION__, urb->status);
+		goto exit;
+	}
+
+	usbtouch->type->process_pkt(usbtouch, regs, usbtouch->data, urb->actual_length);
+
+exit:
+	retval = usb_submit_urb(urb, GFP_ATOMIC);
+	if (retval)
+		err("%s - usb_submit_urb failed with result: %d",
+		    __FUNCTION__, retval);
+}
+
+static int usbtouch_open(struct input_dev *input)
+{
+	struct usbtouch_usb *usbtouch = input->private;
+
+	usbtouch->irq->dev = usbtouch->udev;
+
+	if (usb_submit_urb(usbtouch->irq, GFP_KERNEL))
+		return -EIO;
+
+	return 0;
+}
+
+static void usbtouch_close(struct input_dev *input)
+{
+	struct usbtouch_usb *usbtouch = input->private;
+
+	usb_kill_urb(usbtouch->irq);
+}
+
+
+static void usbtouch_free_buffers(struct usb_device *udev,
+				  struct usbtouch_usb *usbtouch)
+{
+	if (usbtouch->data)
+		usb_buffer_free(udev, usbtouch->type->rept_size,
+		                usbtouch->data, usbtouch->data_dma);
+	kfree(usbtouch->buffer);
+}
+
+
+static int usbtouch_probe(struct usb_interface *intf,
+			  const struct usb_device_id *id)
+{
+	struct usbtouch_usb *usbtouch;
+	struct input_dev *input_dev;
+	struct usb_host_interface *interface;
+	struct usb_endpoint_descriptor *endpoint;
+	struct usb_device *udev = interface_to_usbdev(intf);
+	struct usbtouch_device_info *type;
+	int err;
+
+	interface = intf->cur_altsetting;
+	endpoint = &interface->endpoint[0].desc;
+
+	usbtouch = kzalloc(sizeof(struct usbtouch_usb), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!usbtouch || !input_dev)
+		goto out_free;
+
+	type = &usbtouch_dev_info[id->driver_info];
+	usbtouch->type = type;
+	if (!type->process_pkt)
+		type->process_pkt = usbtouch_process_pkt;
+
+	usbtouch->data = usb_buffer_alloc(udev, type->rept_size,
+	                                  SLAB_KERNEL, &usbtouch->data_dma);
+	if (!usbtouch->data)
+		goto out_free;
+
+	if (type->flags & USBTOUCH_FLG_BUFFER) {
+		usbtouch->buffer = kmalloc(type->rept_size, GFP_KERNEL);
+		if (!usbtouch->buffer)
+			goto out_free_buffers;
+	}
+
+	usbtouch->irq = usb_alloc_urb(0, GFP_KERNEL);
+	if (!usbtouch->irq) {
+		dbg("%s - usb_alloc_urb failed: usbtouch->irq", __FUNCTION__);
+		goto out_free_buffers;
+	}
+
+	usbtouch->udev = udev;
+	usbtouch->input = input_dev;
+
+	if (udev->manufacturer)
+		strlcpy(usbtouch->name, udev->manufacturer, sizeof(usbtouch->name));
+
+	if (udev->product) {
+		if (udev->manufacturer)
+			strlcat(usbtouch->name, " ", sizeof(usbtouch->name));
+		strlcat(usbtouch->name, udev->product, sizeof(usbtouch->name));
+	}
+
+	if (!strlen(usbtouch->name))
+		snprintf(usbtouch->name, sizeof(usbtouch->name),
+			"USB Touchscreen %04x:%04x",
+			 le16_to_cpu(udev->descriptor.idVendor),
+			 le16_to_cpu(udev->descriptor.idProduct));
+
+	usb_make_path(udev, usbtouch->phys, sizeof(usbtouch->phys));
+	strlcpy(usbtouch->phys, "/input0", sizeof(usbtouch->phys));
+
+	input_dev->name = usbtouch->name;
+	input_dev->phys = usbtouch->phys;
+	usb_to_input_id(udev, &input_dev->id);
+	input_dev->cdev.dev = &intf->dev;
+	input_dev->private = usbtouch;
+	input_dev->open = usbtouch_open;
+	input_dev->close = usbtouch_close;
+
+	input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
+	input_dev->keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH);
+	input_set_abs_params(input_dev, ABS_X, type->min_xc, type->max_xc, 0, 0);
+	input_set_abs_params(input_dev, ABS_Y, type->min_yc, type->max_yc, 0, 0);
+	if (type->max_press)
+		input_set_abs_params(input_dev, ABS_PRESSURE, type->min_press,
+		                     type->max_press, 0, 0);
+
+	usb_fill_int_urb(usbtouch->irq, usbtouch->udev,
+			 usb_rcvintpipe(usbtouch->udev, 0x81),
+			 usbtouch->data, type->rept_size,
+			 usbtouch_irq, usbtouch, endpoint->bInterval);
+
+	usbtouch->irq->transfer_dma = usbtouch->data_dma;
+	usbtouch->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+	/* device specific init */
+	if (type->init) {
+		err = type->init(usbtouch);
+		if (err) {
+			dbg("%s - type->init() failed, err: %d", __FUNCTION__, err);
+			goto out_free_buffers;
+		}
+	}
+
+	err = input_register_device(usbtouch->input);
+	if (err) {
+		dbg("%s - input_register_device failed, err: %d", __FUNCTION__, err);
+		goto out_free_buffers;
+	}
+
+	usb_set_intfdata(intf, usbtouch);
+
+	return 0;
+
+out_free_buffers:
+	usbtouch_free_buffers(udev, usbtouch);
+out_free:
+	input_free_device(input_dev);
+	kfree(usbtouch);
+	return -ENOMEM;
+}
+
+static void usbtouch_disconnect(struct usb_interface *intf)
+{
+	struct usbtouch_usb *usbtouch = usb_get_intfdata(intf);
+
+	dbg("%s - called", __FUNCTION__);
+
+	if (!usbtouch)
+		return;
+
+	dbg("%s - usbtouch is initialized, cleaning up", __FUNCTION__);
+	usb_set_intfdata(intf, NULL);
+	usb_kill_urb(usbtouch->irq);
+	input_unregister_device(usbtouch->input);
+	usb_free_urb(usbtouch->irq);
+	usbtouch_free_buffers(interface_to_usbdev(intf), usbtouch);
+	kfree(usbtouch);
+}
+
+MODULE_DEVICE_TABLE(usb, usbtouch_devices);
+
+static struct usb_driver usbtouch_driver = {
+	.name		= "usbtouchscreen",
+	.probe		= usbtouch_probe,
+	.disconnect	= usbtouch_disconnect,
+	.id_table	= usbtouch_devices,
+};
+
+static int __init usbtouch_init(void)
+{
+	return usb_register(&usbtouch_driver);
+}
+
+static void __exit usbtouch_cleanup(void)
+{
+	usb_deregister(&usbtouch_driver);
+}
+
+module_init(usbtouch_init);
+module_exit(usbtouch_cleanup);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+MODULE_ALIAS("touchkitusb");
+MODULE_ALIAS("itmtouch");
+MODULE_ALIAS("mtouchusb");
diff --git a/drivers/usb/input/wacom.c b/drivers/usb/input/wacom.c
index d3e15df9e815..cf84c6096f29 100644
--- a/drivers/usb/input/wacom.c
+++ b/drivers/usb/input/wacom.c
@@ -9,7 +9,7 @@
  *  Copyright (c) 2000 Daniel Egger		<egger@suse.de>
  *  Copyright (c) 2001 Frederic Lepied		<flepied@mandrakesoft.com>
  *  Copyright (c) 2004 Panagiotis Issaris	<panagiotis.issaris@mech.kuleuven.ac.be>
- *  Copyright (c) 2002-2005 Ping Cheng		<pingc@wacom.com>
+ *  Copyright (c) 2002-2006 Ping Cheng		<pingc@wacom.com>
  *
  *  ChangeLog:
  *      v0.1 (vp)  - Initial release
@@ -56,6 +56,8 @@
  *		   - Merged wacom_intuos3_irq into wacom_intuos_irq
  *	v1.44 (pc) - Added support for Graphire4, Cintiq 710, Intuos3 6x11, etc.
  *		   - Report Device IDs
+ *	v1.45 (pc) - Added support for DTF 521, Intuos3 12x12 and 12x19
+ *		   - Minor data report fix
  */
 
 /*
@@ -78,7 +80,7 @@
 /*
  * Version Information
  */
-#define DRIVER_VERSION "v1.44"
+#define DRIVER_VERSION "v1.45"
 #define DRIVER_AUTHOR "Vojtech Pavlik <vojtech@ucw.cz>"
 #define DRIVER_DESC "USB Wacom Graphire and Wacom Intuos tablet driver"
 #define DRIVER_LICENSE "GPL"
@@ -99,6 +101,8 @@ enum {
 	PL,
 	INTUOS,
 	INTUOS3,
+	INTUOS312,
+	INTUOS319,
 	CINTIQ,
 	MAX_TYPE
 };
@@ -127,7 +131,19 @@ struct wacom {
 	char phys[32];
 };
 
+#define USB_REQ_GET_REPORT	0x01
 #define USB_REQ_SET_REPORT	0x09
+
+static int usb_get_report(struct usb_interface *intf, unsigned char type,
+				unsigned char id, void *buf, int size)
+{
+	return usb_control_msg(interface_to_usbdev(intf),
+		usb_rcvctrlpipe(interface_to_usbdev(intf), 0),
+		USB_REQ_GET_REPORT, USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+		(type << 8) + id, intf->altsetting[0].desc.bInterfaceNumber,
+		buf, size, 100);
+}
+
 static int usb_set_report(struct usb_interface *intf, unsigned char type,
 				unsigned char id, void *buf, int size)
 {
@@ -206,7 +222,8 @@ static void wacom_pl_irq(struct urb *urb, struct pt_regs *regs)
 			wacom->tool[1] = BTN_TOOL_PEN;
 			id = STYLUS_DEVICE_ID;
 		}
-		input_report_key(dev, wacom->tool[1], id); /* report in proximity for tool */
+		input_report_key(dev, wacom->tool[1], prox); /* report in proximity for tool */
+		input_report_abs(dev, ABS_MISC, id); /* report tool id */
 		input_report_abs(dev, ABS_X, data[3] | (data[2] << 7) | ((data[1] & 0x03) << 14));
 		input_report_abs(dev, ABS_Y, data[6] | (data[5] << 7) | ((data[4] & 0x03) << 14));
 		input_report_abs(dev, ABS_PRESSURE, pressure);
@@ -239,7 +256,7 @@ static void wacom_ptu_irq(struct urb *urb, struct pt_regs *regs)
 	struct wacom *wacom = urb->context;
 	unsigned char *data = wacom->data;
 	struct input_dev *dev = wacom->dev;
-	int retval;
+	int retval, id;
 
 	switch (urb->status) {
 	case 0:
@@ -263,12 +280,15 @@ static void wacom_ptu_irq(struct urb *urb, struct pt_regs *regs)
 
 	input_regs(dev, regs);
 	if (data[1] & 0x04) {
-		input_report_key(dev, BTN_TOOL_RUBBER, (data[1] & 0x20) ? ERASER_DEVICE_ID : 0);
+		input_report_key(dev, BTN_TOOL_RUBBER, data[1] & 0x20);
 		input_report_key(dev, BTN_TOUCH, data[1] & 0x08);
+		id = ERASER_DEVICE_ID;
 	} else {
-		input_report_key(dev, BTN_TOOL_PEN, (data[1] & 0x20) ? STYLUS_DEVICE_ID : 0);
+		input_report_key(dev, BTN_TOOL_PEN, data[1] & 0x20);
 		input_report_key(dev, BTN_TOUCH, data[1] & 0x01);
+		id = STYLUS_DEVICE_ID;
 	}
+	input_report_abs(dev, ABS_MISC, id); /* report tool id */
 	input_report_abs(dev, ABS_X, le16_to_cpu(*(__le16 *) &data[2]));
 	input_report_abs(dev, ABS_Y, le16_to_cpu(*(__le16 *) &data[4]));
 	input_report_abs(dev, ABS_PRESSURE, le16_to_cpu(*(__le16 *) &data[6]));
@@ -312,7 +332,8 @@ static void wacom_penpartner_irq(struct urb *urb, struct pt_regs *regs)
 	}
 
 	input_regs(dev, regs);
-	input_report_key(dev, BTN_TOOL_PEN, STYLUS_DEVICE_ID);
+	input_report_key(dev, BTN_TOOL_PEN, 1);
+	input_report_abs(dev, ABS_MISC, STYLUS_DEVICE_ID); /* report tool id */
 	input_report_abs(dev, ABS_X, le16_to_cpu(*(__le16 *) &data[1]));
 	input_report_abs(dev, ABS_Y, le16_to_cpu(*(__le16 *) &data[3]));
 	input_report_abs(dev, ABS_PRESSURE, (signed char)data[6] + 127);
@@ -350,6 +371,8 @@ static void wacom_graphire_irq(struct urb *urb, struct pt_regs *regs)
 		goto exit;
 	}
 
+	if (data[0] == 99) return; /* for Volito tablets */
+
 	if (data[0] != 2) {
 		dbg("wacom_graphire_irq: received unknown report #%d", data[0]);
 		goto exit;
@@ -374,10 +397,10 @@ static void wacom_graphire_irq(struct urb *urb, struct pt_regs *regs)
 			case 2: /* Mouse with wheel */
 				input_report_key(dev, BTN_MIDDLE, data[1] & 0x04);
 				if (wacom->features->type == WACOM_G4) {
-					rw = data[7] & 0x04 ? -(data[7] & 0x03) : (data[7] & 0x03);
-					input_report_rel(dev, REL_WHEEL, rw);
+					rw = data[7] & 0x04 ? (data[7] & 0x03)-4 : (data[7] & 0x03);
+					input_report_rel(dev, REL_WHEEL, -rw);
 				} else
-					input_report_rel(dev, REL_WHEEL, (signed char) data[6]);
+					input_report_rel(dev, REL_WHEEL, -(signed char) data[6]);
 				/* fall through */
 
 			case 3: /* Mouse without wheel */
@@ -406,39 +429,27 @@ static void wacom_graphire_irq(struct urb *urb, struct pt_regs *regs)
 		}
 	}
 
-	input_report_key(dev, wacom->tool[0], (data[1] & 0x10) ? id : 0);
+	if (data[1] & 0x10)
+		input_report_abs(dev, ABS_MISC, id); /* report tool id */
+	else
+		input_report_abs(dev, ABS_MISC, 0); /* reset tool id */
+	input_report_key(dev, wacom->tool[0], data[1] & 0x10);
 	input_sync(dev);
 
 	/* send pad data */
 	if (wacom->features->type == WACOM_G4) {
-		/* fist time sending pad data */
-		if (wacom->tool[1] != BTN_TOOL_FINGER) {
-			wacom->id[1] = 0;
-			wacom->serial[1] = (data[7] & 0x38) >> 2;
-		}
-		if (data[7] & 0xf8) {
+		if ((wacom->serial[1] & 0xc0) != (data[7] & 0xf8)) {
+			wacom->id[1] = 1;
+			wacom->serial[1] = (data[7] & 0xf8);
 			input_report_key(dev, BTN_0, (data[7] & 0x40));
 			input_report_key(dev, BTN_4, (data[7] & 0x80));
-			if (((data[7] & 0x38) >> 2) == (wacom->serial[1] & 0x0e))
-				/* alter REL_WHEEL value so X apps can get it */
-				wacom->serial[1] += (wacom->serial[1] & 0x01) ? -1 : 1;
-			else
-				 wacom->serial[1] = (data[7] & 0x38 ) >> 2;
-
-			/* don't alter the value when there is no wheel event */
-			if (wacom->serial[1] == 1)
-				wacom->serial[1] = 0;
-			rw = wacom->serial[1];
-			rw = (rw & 0x08) ? -(rw & 0x07) : (rw & 0x07);
+			rw = ((data[7] & 0x18) >> 3) - ((data[7] & 0x20) >> 3);
 			input_report_rel(dev, REL_WHEEL, rw);
-			wacom->tool[1] = BTN_TOOL_FINGER;
-			wacom->id[1] = data[7] & 0xf8;
-			input_report_key(dev, wacom->tool[1], 0xf0);
+			input_report_key(dev, BTN_TOOL_FINGER, 0xf0);
 			input_event(dev, EV_MSC, MSC_SERIAL, 0xf0);
 		} else if (wacom->id[1]) {
 			wacom->id[1] = 0;
-			wacom->serial[1] = 0;
-			input_report_key(dev, wacom->tool[1], 0);
+			input_report_key(dev, BTN_TOOL_FINGER, 0);
 			input_event(dev, EV_MSC, MSC_SERIAL, 0xf0);
 		}
 		input_sync(dev);
@@ -516,21 +527,31 @@ static int wacom_intuos_inout(struct urb *urb)
 			default: /* Unknown tool */
 				wacom->tool[idx] = BTN_TOOL_PEN;
 		}
-		input_report_key(dev, wacom->tool[idx], wacom->id[idx]);
-		input_event(dev, EV_MSC, MSC_SERIAL, wacom->serial[idx]);
-		input_sync(dev);
+		if(!((wacom->tool[idx] == BTN_TOOL_LENS) &&
+				((wacom->features->type == INTUOS312)
+					|| (wacom->features->type == INTUOS319)))) {
+			input_report_abs(dev, ABS_MISC, wacom->id[idx]); /* report tool id */
+			input_report_key(dev, wacom->tool[idx], 1);
+			input_event(dev, EV_MSC, MSC_SERIAL, wacom->serial[idx]);
+			input_sync(dev);
+		}
 		return 1;
 	}
 
 	/* Exit report */
 	if ((data[1] & 0xfe) == 0x80) {
 		input_report_key(dev, wacom->tool[idx], 0);
+		input_report_abs(dev, ABS_MISC, 0); /* reset tool id */
 		input_event(dev, EV_MSC, MSC_SERIAL, wacom->serial[idx]);
 		input_sync(dev);
 		return 1;
 	}
 
-	return 0;
+	if((wacom->tool[idx] == BTN_TOOL_LENS) && ((wacom->features->type == INTUOS312)
+			|| (wacom->features->type == INTUOS319)))
+		return 1;
+	else
+		return 0;
 }
 
 static void wacom_intuos_general(struct urb *urb)
@@ -600,10 +621,9 @@ static void wacom_intuos_irq(struct urb *urb, struct pt_regs *regs)
 	/* pad packets. Works as a second tool and is always in prox */
 	if (data[0] == 12) {
 		/* initiate the pad as a device */
-		if (wacom->tool[1] != BTN_TOOL_FINGER) {
+		if (wacom->tool[1] != BTN_TOOL_FINGER)
 			wacom->tool[1] = BTN_TOOL_FINGER;
-			input_report_key(dev, wacom->tool[1], 1);
-		}
+
 		input_report_key(dev, BTN_0, (data[5] & 0x01));
 		input_report_key(dev, BTN_1, (data[5] & 0x02));
 		input_report_key(dev, BTN_2, (data[5] & 0x04));
@@ -614,6 +634,11 @@ static void wacom_intuos_irq(struct urb *urb, struct pt_regs *regs)
 		input_report_key(dev, BTN_7, (data[6] & 0x08));
 		input_report_abs(dev, ABS_RX, ((data[1] & 0x1f) << 8) | data[2]);
 		input_report_abs(dev, ABS_RY, ((data[3] & 0x1f) << 8) | data[4]);
+
+		if((data[5] & 0x0f) | (data[6] & 0x0f) | (data[1] & 0x1f) | data[2])
+			input_report_key(dev, wacom->tool[1], 1);
+		else
+			input_report_key(dev, wacom->tool[1], 0);
 		input_event(dev, EV_MSC, MSC_SERIAL, 0xffffffff);
 		input_sync(dev);
 		goto exit;
@@ -676,8 +701,8 @@ static void wacom_intuos_irq(struct urb *urb, struct pt_regs *regs)
 			input_report_key(dev, BTN_LEFT,   data[8] & 0x04);
 			input_report_key(dev, BTN_MIDDLE, data[8] & 0x08);
 			input_report_key(dev, BTN_RIGHT,  data[8] & 0x10);
-			input_report_rel(dev, REL_WHEEL, ((data[8] & 0x02) >> 1)
-						 - (data[8] & 0x01));
+			input_report_rel(dev, REL_WHEEL, (data[8] & 0x01)
+						 - ((data[8] & 0x02) >> 1));
 
 			/* I3 2D mouse side buttons */
 			if (wacom->features->type == INTUOS3) {
@@ -695,7 +720,8 @@ static void wacom_intuos_irq(struct urb *urb, struct pt_regs *regs)
 		}
 	}
 
-	input_report_key(dev, wacom->tool[idx], wacom->id[idx]);
+	input_report_abs(dev, ABS_MISC, wacom->id[idx]); /* report tool id */
+	input_report_key(dev, wacom->tool[idx], 1);
 	input_event(dev, EV_MSC, MSC_SERIAL, wacom->serial[idx]);
 	input_sync(dev);
 
@@ -733,7 +759,8 @@ static struct wacom_features wacom_features[] = {
 	{ "Wacom PL800",         8,   7220,  5780,  511, 32, PL,         wacom_pl_irq },
 	{ "Wacom PL700",         8,   6758,  5406,  511, 32, PL,	 wacom_pl_irq },
 	{ "Wacom PL510",         8,   6282,  4762,  511, 32, PL,	 wacom_pl_irq },
-	{ "Wacom PL710",         8,  34080, 27660,  511, 32, PL,	 wacom_pl_irq },
+	{ "Wacom DTU710",        8,  34080, 27660,  511, 32, PL,	 wacom_pl_irq },
+	{ "Wacom DTF521",        8,   6282,  4762,  511, 32, PL,         wacom_pl_irq },
 	{ "Wacom DTF720",        8,   6858,  5506,  511, 32, PL,	 wacom_pl_irq },
 	{ "Wacom Cintiq Partner",8,  20480, 15360,  511, 32, PL,         wacom_ptu_irq },
 	{ "Wacom Intuos2 4x5",   10, 12700, 10600, 1023, 15, INTUOS,     wacom_intuos_irq },
@@ -744,6 +771,8 @@ static struct wacom_features wacom_features[] = {
 	{ "Wacom Intuos3 4x5",   10, 25400, 20320, 1023, 15, INTUOS3,    wacom_intuos_irq },
 	{ "Wacom Intuos3 6x8",   10, 40640, 30480, 1023, 15, INTUOS3,    wacom_intuos_irq },
 	{ "Wacom Intuos3 9x12",  10, 60960, 45720, 1023, 15, INTUOS3,    wacom_intuos_irq },
+	{ "Wacom Intuos3 12x12", 10, 60960, 60960, 1023, 15, INTUOS312,  wacom_intuos_irq },
+	{ "Wacom Intuos3 12x19", 10, 97536, 60960, 1023, 15, INTUOS319,  wacom_intuos_irq },
 	{ "Wacom Intuos3 6x11",  10, 54204, 31750, 1023, 15, INTUOS3,    wacom_intuos_irq },
 	{ "Wacom Cintiq 21UX",   10, 87200, 65600, 1023, 15, CINTIQ,     wacom_intuos_irq },
 	{ "Wacom Intuos2 6x8",   10, 20320, 16240, 1023, 15, INTUOS,     wacom_intuos_irq },
@@ -779,6 +808,7 @@ static struct usb_device_id wacom_ids[] = {
 	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x38) },
 	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x39) },
 	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC0) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC3) },
 	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x03) },
 	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x41) },
 	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x42) },
@@ -788,6 +818,8 @@ static struct usb_device_id wacom_ids[] = {
 	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB0) },
 	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB1) },
 	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB2) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB3) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB4) },
 	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB5) },
 	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x3F) },
 	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x47) },
@@ -820,7 +852,7 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i
 	struct usb_endpoint_descriptor *endpoint;
 	struct wacom *wacom;
 	struct input_dev *input_dev;
-	char rep_data[2] = {0x02, 0x02};
+	char rep_data[2], limit = 0;
 
 	wacom = kzalloc(sizeof(struct wacom), GFP_KERNEL);
 	input_dev = input_allocate_device();
@@ -857,6 +889,7 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i
 	input_set_abs_params(input_dev, ABS_X, 0, wacom->features->x_max, 4, 0);
 	input_set_abs_params(input_dev, ABS_Y, 0, wacom->features->y_max, 4, 0);
 	input_set_abs_params(input_dev, ABS_PRESSURE, 0, wacom->features->pressure_max, 0, 0);
+	input_dev->absbit[LONG(ABS_MISC)] |= BIT(ABS_MISC);
 
 	switch (wacom->features->type) {
 		case WACOM_G4:
@@ -875,6 +908,8 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i
 			break;
 
 		case INTUOS3:
+		case INTUOS312:
+		case INTUOS319:
 		case CINTIQ:
 			input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_FINGER);
 			input_dev->keybit[LONG(BTN_LEFT)] |= BIT(BTN_0) | BIT(BTN_1) | BIT(BTN_2) | BIT(BTN_3) | BIT(BTN_4) | BIT(BTN_5) | BIT(BTN_6) | BIT(BTN_7);
@@ -916,10 +951,13 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i
 
 	input_register_device(wacom->dev);
 
-	/* ask the tablet to report tablet data */
-	usb_set_report(intf, 3, 2, rep_data, 2);
-	/* repeat once (not sure why the first call often fails) */
-	usb_set_report(intf, 3, 2, rep_data, 2);
+	/* Ask the tablet to report tablet data. Repeat until it succeeds */
+	do {
+		rep_data[0] = 2;
+		rep_data[1] = 2;
+		usb_set_report(intf, 3, 2, rep_data, 2);
+		usb_get_report(intf, 3, 2, rep_data, 2);
+	} while (rep_data[1] != 2 && limit++ < 5);
 
 	usb_set_intfdata(intf, wacom);
 	return 0;
diff --git a/drivers/usb/misc/emi26.c b/drivers/usb/misc/emi26.c
index 3824df33094e..1fd9cb85f4ca 100644
--- a/drivers/usb/misc/emi26.c
+++ b/drivers/usb/misc/emi26.c
@@ -15,6 +15,7 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/usb.h>
+#include <linux/delay.h>
 
 #define MAX_INTEL_HEX_RECORD_LENGTH 16
 typedef struct _INTEL_HEX_RECORD
@@ -114,6 +115,7 @@ static int emi26_load_firmware (struct usb_device *dev)
 
 	/* De-assert reset (let the CPU run) */
 	err = emi26_set_reset(dev,0);
+	msleep(250);	/* let device settle */
 
 	/* 2. We upload the FPGA firmware into the EMI
 	 * Note: collect up to 1023 (yes!) bytes and send them with
@@ -150,6 +152,7 @@ static int emi26_load_firmware (struct usb_device *dev)
 			goto wraperr;
 		}
 	}
+	msleep(250);	/* let device settle */
 
 	/* De-assert reset (let the CPU run) */
 	err = emi26_set_reset(dev,0);
@@ -192,6 +195,7 @@ static int emi26_load_firmware (struct usb_device *dev)
 		err("%s - error loading firmware: error = %d", __FUNCTION__, err);
 		goto wraperr;
 	}
+	msleep(250);	/* let device settle */
 
 	/* return 1 to fail the driver inialization
 	 * and give real driver change to load */
diff --git a/drivers/usb/misc/emi62.c b/drivers/usb/misc/emi62.c
index 52fea2e08db8..fe351371f274 100644
--- a/drivers/usb/misc/emi62.c
+++ b/drivers/usb/misc/emi62.c
@@ -15,6 +15,7 @@
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/usb.h>
+#include <linux/delay.h>
 
 #define MAX_INTEL_HEX_RECORD_LENGTH 16
 typedef struct _INTEL_HEX_RECORD
@@ -123,6 +124,7 @@ static int emi62_load_firmware (struct usb_device *dev)
 
 	/* De-assert reset (let the CPU run) */
 	err = emi62_set_reset(dev,0);
+	msleep(250);	/* let device settle */
 
 	/* 2. We upload the FPGA firmware into the EMI
 	 * Note: collect up to 1023 (yes!) bytes and send them with
@@ -166,6 +168,7 @@ static int emi62_load_firmware (struct usb_device *dev)
 		err("%s - error loading firmware: error = %d", __FUNCTION__, err);
 		goto wraperr;
 	}
+	msleep(250);	/* let device settle */
 
 	/* 4. We put the part of the firmware that lies in the external RAM into the EZ-USB */
 
@@ -228,6 +231,7 @@ static int emi62_load_firmware (struct usb_device *dev)
 		err("%s - error loading firmware: error = %d", __FUNCTION__, err);
 		goto wraperr;
 	}
+	msleep(250);	/* let device settle */
 
 	kfree(buf);
 
diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c
index 9d59b901841c..ccc5e8238bd8 100644
--- a/drivers/usb/misc/usbtest.c
+++ b/drivers/usb/misc/usbtest.c
@@ -381,6 +381,7 @@ alloc_sglist (int nents, int max, int vary)
 
 	for (i = 0; i < nents; i++) {
 		char		*buf;
+		unsigned	j;
 
 		buf = kzalloc (size, SLAB_KERNEL);
 		if (!buf) {
@@ -391,6 +392,16 @@ alloc_sglist (int nents, int max, int vary)
 		/* kmalloc pages are always physically contiguous! */
 		sg_init_one(&sg[i], buf, size);
 
+		switch (pattern) {
+		case 0:
+			/* already zeroed */
+			break;
+		case 1:
+			for (j = 0; j < size; j++)
+				*buf++ = (u8) (j % 63);
+			break;
+		}
+
 		if (vary) {
 			size += vary;
 			size %= max;
@@ -425,6 +436,8 @@ static int perform_sglist (
 		usb_sg_wait (req);
 		retval = req->status;
 
+		/* FIXME check resulting data pattern */
+
 		/* FIXME if endpoint halted, clear halt (and log) */
 	}
 
diff --git a/drivers/usb/net/asix.c b/drivers/usb/net/asix.c
index 3094970615cb..12b599a0b539 100644
--- a/drivers/usb/net/asix.c
+++ b/drivers/usb/net/asix.c
@@ -37,7 +37,6 @@
 
 #include "usbnet.h"
 
-
 /* ASIX AX8817X based USB 2.0 Ethernet Devices */
 
 #define AX_CMD_SET_SW_MII		0x06
@@ -109,7 +108,7 @@
 #define AX_EEPROM_MAGIC			0xdeadbeef
 
 /* This structure cannot exceed sizeof(unsigned long [5]) AKA 20 bytes */
-struct ax8817x_data {
+struct asix_data {
 	u8 multi_filter[AX_MCAST_FILTER_SIZE];
 };
 
@@ -121,7 +120,7 @@ struct ax88172_int_data {
 	u16 res3;
 } __attribute__ ((packed));
 
-static int ax8817x_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
+static int asix_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
 			    u16 size, void *data)
 {
 	return usb_control_msg(
@@ -136,7 +135,7 @@ static int ax8817x_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
 		USB_CTRL_GET_TIMEOUT);
 }
 
-static int ax8817x_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
+static int asix_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
 			     u16 size, void *data)
 {
 	return usb_control_msg(
@@ -151,19 +150,80 @@ static int ax8817x_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
 		USB_CTRL_SET_TIMEOUT);
 }
 
-static void ax8817x_async_cmd_callback(struct urb *urb, struct pt_regs *regs)
+static void asix_async_cmd_callback(struct urb *urb, struct pt_regs *regs)
 {
 	struct usb_ctrlrequest *req = (struct usb_ctrlrequest *)urb->context;
 
 	if (urb->status < 0)
-		printk(KERN_DEBUG "ax8817x_async_cmd_callback() failed with %d",
+		printk(KERN_DEBUG "asix_async_cmd_callback() failed with %d",
 			urb->status);
 
 	kfree(req);
 	usb_free_urb(urb);
 }
 
-static void ax8817x_status(struct usbnet *dev, struct urb *urb)
+static inline int asix_set_sw_mii(struct usbnet *dev)
+{
+	int ret;
+	ret = asix_write_cmd(dev, AX_CMD_SET_SW_MII, 0x0000, 0, 0, NULL);
+	if (ret < 0)
+		devdbg(dev, "Failed to enable software MII access");
+	return ret;
+}
+
+static inline int asix_set_hw_mii(struct usbnet *dev)
+{
+	int ret;
+	ret = asix_write_cmd(dev, AX_CMD_SET_HW_MII, 0x0000, 0, 0, NULL);
+	if (ret < 0)
+		devdbg(dev, "Failed to enable hardware MII access");
+	return ret;
+}
+
+static inline int asix_get_phyid(struct usbnet *dev)
+{
+	int ret = 0;
+	void *buf;
+
+	buf = kmalloc(2, GFP_KERNEL);
+	if (!buf)
+		goto out1;
+
+	if ((ret = asix_read_cmd(dev, AX_CMD_READ_PHY_ID,
+				    0, 0, 2, buf)) < 2) {
+		devdbg(dev, "Error reading PHYID register: %02x", ret);
+		goto out2;
+	}
+	ret = *((u8 *)buf + 1);
+out2:
+	kfree(buf);
+out1:
+	return ret;
+}
+
+static int asix_sw_reset(struct usbnet *dev, u8 flags)
+{
+	int ret;
+
+        ret = asix_write_cmd(dev, AX_CMD_SW_RESET, flags, 0, 0, NULL);
+	if (ret < 0)
+		devdbg(dev,"Failed to send software reset: %02x", ret);
+
+	return ret;
+}
+
+static int asix_write_rx_ctl(struct usbnet *dev, u16 mode)
+{
+	int ret;
+
+	ret = asix_write_cmd(dev, AX_CMD_WRITE_RX_CTL, mode, 0, 0, NULL);
+	if (ret < 0)
+                devdbg(dev, "Failed to write RX_CTL mode: %02x", ret);
+
+	return ret;
+}
+
+static void asix_status(struct usbnet *dev, struct urb *urb)
 {
 	struct ax88172_int_data *event;
 	int link;
@@ -179,12 +239,12 @@ static void ax8817x_status(struct usbnet *dev, struct urb *urb)
 			usbnet_defer_kevent (dev, EVENT_LINK_RESET );
 		} else
 			netif_carrier_off(dev->net);
-		devdbg(dev, "ax8817x - Link Status is: %d", link);
+		devdbg(dev, "Link Status is: %d", link);
 	}
 }
 
 static void
-ax8817x_write_cmd_async(struct usbnet *dev, u8 cmd, u16 value, u16 index,
+asix_write_cmd_async(struct usbnet *dev, u8 cmd, u16 value, u16 index,
 				    u16 size, void *data)
 {
 	struct usb_ctrlrequest *req;
@@ -211,7 +271,7 @@ ax8817x_write_cmd_async(struct usbnet *dev, u8 cmd, u16 value, u16 index,
 	usb_fill_control_urb(urb, dev->udev,
 			     usb_sndctrlpipe(dev->udev, 0),
 			     (void *)req, data, size,
-			     ax8817x_async_cmd_callback, req);
+			     asix_async_cmd_callback, req);
 
 	if((status = usb_submit_urb(urb, GFP_ATOMIC)) < 0) {
 		deverr(dev, "Error submitting the control message: status=%d",
@@ -221,10 +281,10 @@ ax8817x_write_cmd_async(struct usbnet *dev, u8 cmd, u16 value, u16 index,
 	}
 }
 
-static void ax8817x_set_multicast(struct net_device *net)
+static void asix_set_multicast(struct net_device *net)
 {
 	struct usbnet *dev = netdev_priv(net);
-	struct ax8817x_data *data = (struct ax8817x_data *)&dev->data;
+	struct asix_data *data = (struct asix_data *)&dev->data;
 	u8 rx_ctl = 0x8c;
 
 	if (net->flags & IFF_PROMISC) {
@@ -255,53 +315,51 @@ static void ax8817x_set_multicast(struct net_device *net)
 			mc_list = mc_list->next;
 		}
 
-		ax8817x_write_cmd_async(dev, AX_CMD_WRITE_MULTI_FILTER, 0, 0,
+		asix_write_cmd_async(dev, AX_CMD_WRITE_MULTI_FILTER, 0, 0,
 				   AX_MCAST_FILTER_SIZE, data->multi_filter);
 
 		rx_ctl |= 0x10;
 	}
 
-	ax8817x_write_cmd_async(dev, AX_CMD_WRITE_RX_CTL, rx_ctl, 0, 0, NULL);
+	asix_write_cmd_async(dev, AX_CMD_WRITE_RX_CTL, rx_ctl, 0, 0, NULL);
 }
 
-static int ax8817x_mdio_read(struct net_device *netdev, int phy_id, int loc)
+static int asix_mdio_read(struct net_device *netdev, int phy_id, int loc)
 {
 	struct usbnet *dev = netdev_priv(netdev);
 	u16 res;
-	u8 buf[1];
 
-	ax8817x_write_cmd(dev, AX_CMD_SET_SW_MII, 0, 0, 0, &buf);
-	ax8817x_read_cmd(dev, AX_CMD_READ_MII_REG, phy_id,
+	asix_set_sw_mii(dev);
+	asix_read_cmd(dev, AX_CMD_READ_MII_REG, phy_id,
 				(__u16)loc, 2, (u16 *)&res);
-	ax8817x_write_cmd(dev, AX_CMD_SET_HW_MII, 0, 0, 0, &buf);
+	asix_set_hw_mii(dev);
 
 	return res & 0xffff;
 }
 
 /* same as above, but converts resulting value to cpu byte order */
-static int ax8817x_mdio_read_le(struct net_device *netdev, int phy_id, int loc)
+static int asix_mdio_read_le(struct net_device *netdev, int phy_id, int loc)
 {
-	return le16_to_cpu(ax8817x_mdio_read(netdev,phy_id, loc));
+	return le16_to_cpu(asix_mdio_read(netdev,phy_id, loc));
 }
 
 static void
-ax8817x_mdio_write(struct net_device *netdev, int phy_id, int loc, int val)
+asix_mdio_write(struct net_device *netdev, int phy_id, int loc, int val)
 {
 	struct usbnet *dev = netdev_priv(netdev);
 	u16 res = val;
-	u8 buf[1];
 
-	ax8817x_write_cmd(dev, AX_CMD_SET_SW_MII, 0, 0, 0, &buf);
-	ax8817x_write_cmd(dev, AX_CMD_WRITE_MII_REG, phy_id,
+	asix_set_sw_mii(dev);
+	asix_write_cmd(dev, AX_CMD_WRITE_MII_REG, phy_id,
 				(__u16)loc, 2, (u16 *)&res);
-	ax8817x_write_cmd(dev, AX_CMD_SET_HW_MII, 0, 0, 0, &buf);
+	asix_set_hw_mii(dev);
 }
 
 /* same as above, but converts new value to le16 byte order before writing */
 static void
-ax8817x_mdio_write_le(struct net_device *netdev, int phy_id, int loc, int val)
+asix_mdio_write_le(struct net_device *netdev, int phy_id, int loc, int val)
 {
-	ax8817x_mdio_write( netdev, phy_id, loc, cpu_to_le16(val) );
+	asix_mdio_write( netdev, phy_id, loc, cpu_to_le16(val) );
 }
 
 static int ax88172_link_reset(struct usbnet *dev)
@@ -312,23 +370,23 @@ static int ax88172_link_reset(struct usbnet *dev)
 	u8 mode;
 
 	mode = AX_MEDIUM_TX_ABORT_ALLOW | AX_MEDIUM_FLOW_CONTROL_EN;
-	lpa = ax8817x_mdio_read_le(dev->net, dev->mii.phy_id, MII_LPA);
-	adv = ax8817x_mdio_read_le(dev->net, dev->mii.phy_id, MII_ADVERTISE);
+	lpa = asix_mdio_read_le(dev->net, dev->mii.phy_id, MII_LPA);
+	adv = asix_mdio_read_le(dev->net, dev->mii.phy_id, MII_ADVERTISE);
 	res = mii_nway_result(lpa|adv);
 	if (res & LPA_DUPLEX)
 		mode |= AX_MEDIUM_FULL_DUPLEX;
-	ax8817x_write_cmd(dev, AX_CMD_WRITE_MEDIUM_MODE, mode, 0, 0, NULL);
+	asix_write_cmd(dev, AX_CMD_WRITE_MEDIUM_MODE, mode, 0, 0, NULL);
 
 	return 0;
 }
 
 static void
-ax8817x_get_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
+asix_get_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
 {
 	struct usbnet *dev = netdev_priv(net);
 	u8 opt;
 
-	if (ax8817x_read_cmd(dev, AX_CMD_READ_MONITOR_MODE, 0, 0, 1, &opt) < 0) {
+	if (asix_read_cmd(dev, AX_CMD_READ_MONITOR_MODE, 0, 0, 1, &opt) < 0) {
 		wolinfo->supported = 0;
 		wolinfo->wolopts = 0;
 		return;
@@ -344,7 +402,7 @@ ax8817x_get_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
 }
 
 static int
-ax8817x_set_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
+asix_set_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
 {
 	struct usbnet *dev = netdev_priv(net);
 	u8 opt = 0;
@@ -357,19 +415,19 @@ ax8817x_set_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
 	if (opt != 0)
 		opt |= AX_MONITOR_MODE;
 
-	if (ax8817x_write_cmd(dev, AX_CMD_WRITE_MONITOR_MODE,
+	if (asix_write_cmd(dev, AX_CMD_WRITE_MONITOR_MODE,
 			      opt, 0, 0, &buf) < 0)
 		return -EINVAL;
 
 	return 0;
 }
 
-static int ax8817x_get_eeprom_len(struct net_device *net)
+static int asix_get_eeprom_len(struct net_device *net)
 {
 	return AX_EEPROM_LEN;
 }
 
-static int ax8817x_get_eeprom(struct net_device *net,
+static int asix_get_eeprom(struct net_device *net,
 			      struct ethtool_eeprom *eeprom, u8 *data)
 {
 	struct usbnet *dev = netdev_priv(net);
@@ -386,14 +444,14 @@ static int ax8817x_get_eeprom(struct net_device *net,
 
 	/* ax8817x returns 2 bytes from eeprom on read */
 	for (i=0; i < eeprom->len / 2; i++) {
-		if (ax8817x_read_cmd(dev, AX_CMD_READ_EEPROM,
+		if (asix_read_cmd(dev, AX_CMD_READ_EEPROM,
 			eeprom->offset + i, 0, 2, &ebuf[i]) < 0)
 			return -EINVAL;
 	}
 	return 0;
 }
 
-static void ax8817x_get_drvinfo (struct net_device *net,
+static void asix_get_drvinfo (struct net_device *net,
 				 struct ethtool_drvinfo *info)
 {
 	/* Inherit standard device info */
@@ -401,14 +459,14 @@ static void ax8817x_get_drvinfo (struct net_device *net,
 	info->eedump_len = 0x3e;
 }
 
-static int ax8817x_get_settings(struct net_device *net, struct ethtool_cmd *cmd)
+static int asix_get_settings(struct net_device *net, struct ethtool_cmd *cmd)
 {
 	struct usbnet *dev = netdev_priv(net);
 
 	return mii_ethtool_gset(&dev->mii,cmd);
 }
 
-static int ax8817x_set_settings(struct net_device *net, struct ethtool_cmd *cmd)
+static int asix_set_settings(struct net_device *net, struct ethtool_cmd *cmd)
 {
 	struct usbnet *dev = netdev_priv(net);
 
@@ -418,27 +476,27 @@ static int ax8817x_set_settings(struct net_device *net, struct ethtool_cmd *cmd)
 /* We need to override some ethtool_ops so we require our
    own structure so we don't interfere with other usbnet
    devices that may be connected at the same time. */
-static struct ethtool_ops ax8817x_ethtool_ops = {
-	.get_drvinfo		= ax8817x_get_drvinfo,
+static struct ethtool_ops ax88172_ethtool_ops = {
+	.get_drvinfo		= asix_get_drvinfo,
 	.get_link		= ethtool_op_get_link,
 	.get_msglevel		= usbnet_get_msglevel,
 	.set_msglevel		= usbnet_set_msglevel,
-	.get_wol		= ax8817x_get_wol,
-	.set_wol		= ax8817x_set_wol,
-	.get_eeprom_len		= ax8817x_get_eeprom_len,
-	.get_eeprom		= ax8817x_get_eeprom,
-	.get_settings		= ax8817x_get_settings,
-	.set_settings		= ax8817x_set_settings,
+	.get_wol		= asix_get_wol,
+	.set_wol		= asix_set_wol,
+	.get_eeprom_len		= asix_get_eeprom_len,
+	.get_eeprom		= asix_get_eeprom,
+	.get_settings		= asix_get_settings,
+	.set_settings		= asix_set_settings,
 };
 
-static int ax8817x_ioctl (struct net_device *net, struct ifreq *rq, int cmd)
+static int asix_ioctl (struct net_device *net, struct ifreq *rq, int cmd)
 {
 	struct usbnet *dev = netdev_priv(net);
 
 	return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL);
 }
 
-static int ax8817x_bind(struct usbnet *dev, struct usb_interface *intf)
+static int ax88172_bind(struct usbnet *dev, struct usb_interface *intf)
 {
 	int ret = 0;
 	void *buf;
@@ -455,55 +513,39 @@ static int ax8817x_bind(struct usbnet *dev, struct usb_interface *intf)
 
 	/* Toggle the GPIOs in a manufacturer/model specific way */
 	for (i = 2; i >= 0; i--) {
-		if ((ret = ax8817x_write_cmd(dev, AX_CMD_WRITE_GPIOS,
+		if ((ret = asix_write_cmd(dev, AX_CMD_WRITE_GPIOS,
 					(gpio_bits >> (i * 8)) & 0xff, 0, 0,
 					buf)) < 0)
 			goto out2;
 		msleep(5);
 	}
 
-	if ((ret = ax8817x_write_cmd(dev, AX_CMD_WRITE_RX_CTL,
-				0x80, 0, 0, buf)) < 0) {
-		dbg("send AX_CMD_WRITE_RX_CTL failed: %d", ret);
+	if ((ret = asix_write_rx_ctl(dev,0x80)) < 0)
 		goto out2;
-	}
 
 	/* Get the MAC address */
 	memset(buf, 0, ETH_ALEN);
-	if ((ret = ax8817x_read_cmd(dev, AX_CMD_READ_NODE_ID,
+	if ((ret = asix_read_cmd(dev, AX_CMD_READ_NODE_ID,
 				0, 0, 6, buf)) < 0) {
 		dbg("read AX_CMD_READ_NODE_ID failed: %d", ret);
 		goto out2;
 	}
 	memcpy(dev->net->dev_addr, buf, ETH_ALEN);
 
-	/* Get the PHY id */
-	if ((ret = ax8817x_read_cmd(dev, AX_CMD_READ_PHY_ID,
-				0, 0, 2, buf)) < 0) {
-		dbg("error on read AX_CMD_READ_PHY_ID: %02x", ret);
-		goto out2;
-	} else if (ret < 2) {
-		/* this should always return 2 bytes */
-		dbg("AX_CMD_READ_PHY_ID returned less than 2 bytes: ret=%02x",
-				ret);
-		ret = -EIO;
-		goto out2;
-	}
-
 	/* Initialize MII structure */
 	dev->mii.dev = dev->net;
-	dev->mii.mdio_read = ax8817x_mdio_read;
-	dev->mii.mdio_write = ax8817x_mdio_write;
+	dev->mii.mdio_read = asix_mdio_read;
+	dev->mii.mdio_write = asix_mdio_write;
 	dev->mii.phy_id_mask = 0x3f;
 	dev->mii.reg_num_mask = 0x1f;
-	dev->mii.phy_id = *((u8 *)buf + 1);
-	dev->net->do_ioctl = ax8817x_ioctl;
+	dev->mii.phy_id = asix_get_phyid(dev);
+	dev->net->do_ioctl = asix_ioctl;
 
-	dev->net->set_multicast_list = ax8817x_set_multicast;
-	dev->net->ethtool_ops = &ax8817x_ethtool_ops;
+	dev->net->set_multicast_list = asix_set_multicast;
+	dev->net->ethtool_ops = &ax88172_ethtool_ops;
 
-	ax8817x_mdio_write_le(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET);
-	ax8817x_mdio_write_le(dev->net, dev->mii.phy_id, MII_ADVERTISE,
+	asix_mdio_write_le(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET);
+	asix_mdio_write_le(dev->net, dev->mii.phy_id, MII_ADVERTISE,
 		ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP);
 	mii_nway_restart(&dev->mii);
 
@@ -515,16 +557,16 @@ out1:
 }
 
 static struct ethtool_ops ax88772_ethtool_ops = {
-	.get_drvinfo		= ax8817x_get_drvinfo,
+	.get_drvinfo		= asix_get_drvinfo,
 	.get_link		= ethtool_op_get_link,
 	.get_msglevel		= usbnet_get_msglevel,
 	.set_msglevel		= usbnet_set_msglevel,
-	.get_wol		= ax8817x_get_wol,
-	.set_wol		= ax8817x_set_wol,
-	.get_eeprom_len		= ax8817x_get_eeprom_len,
-	.get_eeprom		= ax8817x_get_eeprom,
-	.get_settings		= ax8817x_get_settings,
-	.set_settings		= ax8817x_set_settings,
+	.get_wol		= asix_get_wol,
+	.set_wol		= asix_set_wol,
+	.get_eeprom_len		= asix_get_eeprom_len,
+	.get_eeprom		= asix_get_eeprom,
+	.get_settings		= asix_get_settings,
+	.set_settings		= asix_set_settings,
 };
 
 static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf)
@@ -541,62 +583,45 @@ static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf)
 		goto out1;
 	}
 
-	if ((ret = ax8817x_write_cmd(dev, AX_CMD_WRITE_GPIOS,
+	if ((ret = asix_write_cmd(dev, AX_CMD_WRITE_GPIOS,
 				     0x00B0, 0, 0, buf)) < 0)
 		goto out2;
 
 	msleep(5);
-	if ((ret = ax8817x_write_cmd(dev, AX_CMD_SW_PHY_SELECT,
+	if ((ret = asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT,
 				0x0001, 0, 0, buf)) < 0) {
 		dbg("Select PHY #1 failed: %d", ret);
 		goto out2;
 	}
 
-	if ((ret = ax8817x_write_cmd(dev, AX_CMD_SW_RESET, AX_SWRESET_IPPD,
-				0, 0, buf)) < 0) {
-		dbg("Failed to power down internal PHY: %d", ret);
+	if ((ret = asix_sw_reset(dev, AX_SWRESET_IPPD)) < 0)
 		goto out2;
-	}
 
 	msleep(150);
-	if ((ret = ax8817x_write_cmd(dev, AX_CMD_SW_RESET, AX_SWRESET_CLEAR,
-				0, 0, buf)) < 0) {
-		dbg("Failed to perform software reset: %d", ret);
+	if ((ret = asix_sw_reset(dev, AX_SWRESET_CLEAR)) < 0)
 		goto out2;
-	}
 
 	msleep(150);
-	if ((ret = ax8817x_write_cmd(dev, AX_CMD_SW_RESET,
-	     			AX_SWRESET_IPRL | AX_SWRESET_PRL,
-				0, 0, buf)) < 0) {
-		dbg("Failed to set Internal/External PHY reset control: %d",
-					ret);
+	if ((ret = asix_sw_reset(dev, AX_SWRESET_IPRL | AX_SWRESET_PRL)) < 0)
 		goto out2;
-	}
 
 	msleep(150);
-	if ((ret = ax8817x_write_cmd(dev, AX_CMD_WRITE_RX_CTL,
-				0x0000, 0, 0, buf)) < 0) {
-		dbg("Failed to reset RX_CTL: %d", ret);
+	if ((ret = asix_write_rx_ctl(dev, 0x00)) < 0)
 		goto out2;
-	}
 
 	/* Get the MAC address */
 	memset(buf, 0, ETH_ALEN);
-	if ((ret = ax8817x_read_cmd(dev, AX88772_CMD_READ_NODE_ID,
+	if ((ret = asix_read_cmd(dev, AX88772_CMD_READ_NODE_ID,
 				0, 0, ETH_ALEN, buf)) < 0) {
 		dbg("Failed to read MAC address: %d", ret);
 		goto out2;
 	}
 	memcpy(dev->net->dev_addr, buf, ETH_ALEN);
 
-	if ((ret = ax8817x_write_cmd(dev, AX_CMD_SET_SW_MII,
-				0, 0, 0, buf)) < 0) {
-		dbg("Enabling software MII failed: %d", ret);
+	if ((ret = asix_set_sw_mii(dev)) < 0)
 		goto out2;
-	}
 
-	if (((ret = ax8817x_read_cmd(dev, AX_CMD_READ_MII_REG,
+	if (((ret = asix_read_cmd(dev, AX_CMD_READ_MII_REG,
 	      			0x0010, 2, 2, buf)) < 0)
 			|| (*((u16 *)buf) != 0x003b)) {
 		dbg("Read PHY register 2 must be 0x3b00: %d", ret);
@@ -605,74 +630,49 @@ static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf)
 
 	/* Initialize MII structure */
 	dev->mii.dev = dev->net;
-	dev->mii.mdio_read = ax8817x_mdio_read;
-	dev->mii.mdio_write = ax8817x_mdio_write;
+	dev->mii.mdio_read = asix_mdio_read;
+	dev->mii.mdio_write = asix_mdio_write;
 	dev->mii.phy_id_mask = 0xff;
 	dev->mii.reg_num_mask = 0xff;
-	dev->net->do_ioctl = ax8817x_ioctl;
+	dev->net->do_ioctl = asix_ioctl;
+	dev->mii.phy_id = asix_get_phyid(dev);
 
-	/* Get the PHY id */
-	if ((ret = ax8817x_read_cmd(dev, AX_CMD_READ_PHY_ID,
-			0, 0, 2, buf)) < 0) {
-		dbg("Error reading PHY ID: %02x", ret);
+	if ((ret = asix_sw_reset(dev, AX_SWRESET_PRL)) < 0)
 		goto out2;
-	} else if (ret < 2) {
-		/* this should always return 2 bytes */
-		dbg("AX_CMD_READ_PHY_ID returned less than 2 bytes: ret=%02x",
-		    ret);
-		ret = -EIO;
-		goto out2;
-	}
-	dev->mii.phy_id = *((u8 *)buf + 1);
 
-	if ((ret = ax8817x_write_cmd(dev, AX_CMD_SW_RESET, AX_SWRESET_PRL,
-				0, 0, buf)) < 0) {
-		dbg("Set external PHY reset pin level: %d", ret);
-		goto out2;
-	}
 	msleep(150);
-	if ((ret = ax8817x_write_cmd(dev, AX_CMD_SW_RESET,
-	     			AX_SWRESET_IPRL | AX_SWRESET_PRL,
-				0, 0, buf)) < 0) {
-		dbg("Set Internal/External PHY reset control: %d", ret);
+
+	if ((ret = asix_sw_reset(dev, AX_SWRESET_IPRL | AX_SWRESET_PRL)) < 0)
 		goto out2;
-	}
-	msleep(150);
 
+	msleep(150);
 
-	dev->net->set_multicast_list = ax8817x_set_multicast;
+	dev->net->set_multicast_list = asix_set_multicast;
 	dev->net->ethtool_ops = &ax88772_ethtool_ops;
 
-	ax8817x_mdio_write_le(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET);
-	ax8817x_mdio_write_le(dev->net, dev->mii.phy_id, MII_ADVERTISE,
+	asix_mdio_write_le(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET);
+	asix_mdio_write_le(dev->net, dev->mii.phy_id, MII_ADVERTISE,
 			ADVERTISE_ALL | ADVERTISE_CSMA);
 	mii_nway_restart(&dev->mii);
 
-	if ((ret = ax8817x_write_cmd(dev, AX_CMD_WRITE_MEDIUM_MODE,
+	if ((ret = asix_write_cmd(dev, AX_CMD_WRITE_MEDIUM_MODE,
 				AX88772_MEDIUM_DEFAULT, 0, 0, buf)) < 0) {
 		dbg("Write medium mode register: %d", ret);
 		goto out2;
 	}
 
-	if ((ret = ax8817x_write_cmd(dev, AX_CMD_WRITE_IPG0,
+	if ((ret = asix_write_cmd(dev, AX_CMD_WRITE_IPG0,
 				AX88772_IPG0_DEFAULT | AX88772_IPG1_DEFAULT,
 				AX88772_IPG2_DEFAULT, 0, buf)) < 0) {
 		dbg("Write IPG,IPG1,IPG2 failed: %d", ret);
 		goto out2;
 	}
-	if ((ret =
-	     ax8817x_write_cmd(dev, AX_CMD_SET_HW_MII, 0, 0, 0, &buf)) < 0) {
-		dbg("Failed to set hardware MII: %02x", ret);
+	if ((ret = asix_set_hw_mii(dev)) < 0)
 		goto out2;
-	}
 
 	/* Set RX_CTL to default values with 2k buffer, and enable cactus */
-	if ((ret =
-	     ax8817x_write_cmd(dev, AX_CMD_WRITE_RX_CTL, 0x0088, 0, 0,
-			       buf)) < 0) {
-		dbg("Reset RX_CTL failed: %d", ret);
+	if ((ret = asix_write_rx_ctl(dev, 0x0088)) < 0)
 		goto out2;
-	}
 
 	kfree(buf);
 
@@ -794,23 +794,23 @@ static int ax88772_link_reset(struct usbnet *dev)
 	u16 mode;
 
 	mode = AX88772_MEDIUM_DEFAULT;
-	lpa = ax8817x_mdio_read_le(dev->net, dev->mii.phy_id, MII_LPA);
-	adv = ax8817x_mdio_read_le(dev->net, dev->mii.phy_id, MII_ADVERTISE);
+	lpa = asix_mdio_read_le(dev->net, dev->mii.phy_id, MII_LPA);
+	adv = asix_mdio_read_le(dev->net, dev->mii.phy_id, MII_ADVERTISE);
 	res = mii_nway_result(lpa|adv);
 
 	if ((res & LPA_DUPLEX) == 0)
 		mode &= ~AX88772_MEDIUM_FULL_DUPLEX;
 	if ((res & LPA_100) == 0)
 		mode &= ~AX88772_MEDIUM_100MB;
-	ax8817x_write_cmd(dev, AX_CMD_WRITE_MEDIUM_MODE, mode, 0, 0, NULL);
+	asix_write_cmd(dev, AX_CMD_WRITE_MEDIUM_MODE, mode, 0, 0, NULL);
 
 	return 0;
 }
 
 static const struct driver_info ax8817x_info = {
 	.description = "ASIX AX8817x USB 2.0 Ethernet",
-	.bind = ax8817x_bind,
-	.status = ax8817x_status,
+	.bind = ax88172_bind,
+	.status = asix_status,
 	.link_reset = ax88172_link_reset,
 	.reset = ax88172_link_reset,
 	.flags =  FLAG_ETHER,
@@ -819,8 +819,8 @@ static const struct driver_info ax8817x_info = {
 
 static const struct driver_info dlink_dub_e100_info = {
 	.description = "DLink DUB-E100 USB Ethernet",
-	.bind = ax8817x_bind,
-	.status = ax8817x_status,
+	.bind = ax88172_bind,
+	.status = asix_status,
 	.link_reset = ax88172_link_reset,
 	.reset = ax88172_link_reset,
 	.flags =  FLAG_ETHER,
@@ -829,8 +829,8 @@ static const struct driver_info dlink_dub_e100_info = {
 
 static const struct driver_info netgear_fa120_info = {
 	.description = "Netgear FA-120 USB Ethernet",
-	.bind = ax8817x_bind,
-	.status = ax8817x_status,
+	.bind = ax88172_bind,
+	.status = asix_status,
 	.link_reset = ax88172_link_reset,
 	.reset = ax88172_link_reset,
 	.flags =  FLAG_ETHER,
@@ -839,8 +839,8 @@ static const struct driver_info netgear_fa120_info = {
 
 static const struct driver_info hawking_uf200_info = {
 	.description = "Hawking UF200 USB Ethernet",
-	.bind = ax8817x_bind,
-	.status = ax8817x_status,
+	.bind = ax88172_bind,
+	.status = asix_status,
 	.link_reset = ax88172_link_reset,
 	.reset = ax88172_link_reset,
 	.flags =  FLAG_ETHER,
@@ -850,13 +850,12 @@ static const struct driver_info hawking_uf200_info = {
 static const struct driver_info ax88772_info = {
 	.description = "ASIX AX88772 USB 2.0 Ethernet",
 	.bind = ax88772_bind,
-	.status = ax8817x_status,
+	.status = asix_status,
 	.link_reset = ax88772_link_reset,
 	.reset = ax88772_link_reset,
 	.flags = FLAG_ETHER | FLAG_FRAMING_AX,
 	.rx_fixup = ax88772_rx_fixup,
 	.tx_fixup = ax88772_tx_fixup,
-	.data = 0x00130103,
 };
 
 static const struct usb_device_id	products [] = {
diff --git a/drivers/usb/net/pegasus.c b/drivers/usb/net/pegasus.c
index 5b6675684567..7683926a1b6f 100644
--- a/drivers/usb/net/pegasus.c
+++ b/drivers/usb/net/pegasus.c
@@ -262,7 +262,7 @@ static int set_register(pegasus_t * pegasus, __u16 indx, __u8 data)
 	usb_fill_control_urb(pegasus->ctrl_urb, pegasus->usb,
 			     usb_sndctrlpipe(pegasus->usb, 0),
 			     (char *) &pegasus->dr,
-			     &tmp, 1, ctrl_callback, pegasus);
+			     tmp, 1, ctrl_callback, pegasus);
 
 	add_wait_queue(&pegasus->ctrl_wait, &wait);
 	set_current_state(TASK_UNINTERRUPTIBLE);
@@ -318,6 +318,8 @@ static int read_mii_word(pegasus_t * pegasus, __u8 phy, __u8 indx, __u16 * regd)
 	set_register(pegasus, PhyCtrl, (indx | PHY_READ));
 	for (i = 0; i < REG_TIMEOUT; i++) {
 		ret = get_registers(pegasus, PhyCtrl, 1, data);
+		if (ret == -ESHUTDOWN)
+			goto fail;
 		if (data[0] & PHY_DONE)
 			break;
 	}
@@ -326,6 +328,7 @@ static int read_mii_word(pegasus_t * pegasus, __u8 phy, __u8 indx, __u16 * regd)
 		*regd = le16_to_cpu(regdi);
 		return ret;
 	}
+fail:
 	if (netif_msg_drv(pegasus))
 		dev_warn(&pegasus->intf->dev, "fail %s\n", __FUNCTION__);
 
@@ -354,12 +357,15 @@ static int write_mii_word(pegasus_t * pegasus, __u8 phy, __u8 indx, __u16 regd)
 	set_register(pegasus, PhyCtrl, (indx | PHY_WRITE));
 	for (i = 0; i < REG_TIMEOUT; i++) {
 		ret = get_registers(pegasus, PhyCtrl, 1, data);
+		if (ret == -ESHUTDOWN)
+			goto fail;
 		if (data[0] & PHY_DONE)
 			break;
 	}
 	if (i < REG_TIMEOUT)
 		return ret;
 
+fail:
 	if (netif_msg_drv(pegasus))
 		dev_warn(&pegasus->intf->dev, "fail %s\n", __FUNCTION__);
 	return -ETIMEDOUT;
@@ -387,6 +393,8 @@ static int read_eprom_word(pegasus_t * pegasus, __u8 index, __u16 * retdata)
 		ret = get_registers(pegasus, EpromCtrl, 1, &tmp);
 		if (tmp & EPROM_DONE)
 			break;
+		if (ret == -ESHUTDOWN)
+			goto fail;
 	}
 	if (i < REG_TIMEOUT) {
 		ret = get_registers(pegasus, EpromData, 2, &retdatai);
@@ -394,6 +402,7 @@ static int read_eprom_word(pegasus_t * pegasus, __u8 index, __u16 * retdata)
 		return ret;
 	}
 
+fail:
 	if (netif_msg_drv(pegasus))
 		dev_warn(&pegasus->intf->dev, "fail %s\n", __FUNCTION__);
 	return -ETIMEDOUT;
@@ -433,12 +442,15 @@ static int write_eprom_word(pegasus_t * pegasus, __u8 index, __u16 data)
 
 	for (i = 0; i < REG_TIMEOUT; i++) {
 		ret = get_registers(pegasus, EpromCtrl, 1, &tmp);
+		if (ret == -ESHUTDOWN)
+			goto fail;
 		if (tmp & EPROM_DONE)
 			break;
 	}
 	disable_eprom_write(pegasus);
 	if (i < REG_TIMEOUT)
 		return ret;
+fail:
 	if (netif_msg_drv(pegasus))
 		dev_warn(&pegasus->intf->dev, "fail %s\n", __FUNCTION__);
 	return -ETIMEDOUT;
@@ -1378,9 +1390,8 @@ static int pegasus_suspend (struct usb_interface *intf, pm_message_t message)
 	struct pegasus *pegasus = usb_get_intfdata(intf);
 	
 	netif_device_detach (pegasus->net);
+	cancel_delayed_work(&pegasus->carrier_check);
 	if (netif_running(pegasus->net)) {
-		cancel_delayed_work(&pegasus->carrier_check);
-
 		usb_kill_urb(pegasus->rx_urb);
 		usb_kill_urb(pegasus->intr_urb);
 	}
@@ -1400,10 +1411,9 @@ static int pegasus_resume (struct usb_interface *intf)
 		pegasus->intr_urb->status = 0;
 		pegasus->intr_urb->actual_length = 0;
 		intr_callback(pegasus->intr_urb, NULL);
-
-		queue_delayed_work(pegasus_workqueue, &pegasus->carrier_check,
-					CARRIER_CHECK_DELAY);
 	}
+	queue_delayed_work(pegasus_workqueue, &pegasus->carrier_check,
+				CARRIER_CHECK_DELAY);
 	return 0;
 }
 
diff --git a/drivers/usb/net/rndis_host.c b/drivers/usb/net/rndis_host.c
index 49991ac1bf3b..94ddfe16fdda 100644
--- a/drivers/usb/net/rndis_host.c
+++ b/drivers/usb/net/rndis_host.c
@@ -39,6 +39,20 @@
  * RNDIS is NDIS remoted over USB.  It's a MSFT variant of CDC ACM ... of
  * course ACM was intended for modems, not Ethernet links!  USB's standard
  * for Ethernet links is "CDC Ethernet", which is significantly simpler.
+ *
+ * NOTE that Microsoft's "RNDIS 1.0" specification is incomplete.  Issues
+ * include:
+ *    - Power management in particular relies on information that's scattered
+ *	through other documentation, and which is incomplete or incorrect even
+ *	there.
+ *    - There are various undocumented protocol requirements, such as the
+ *	need to send unused garbage in control-OUT messages.
+ *    - In some cases, MS-Windows will emit undocumented requests; this
+ *	matters more to peripheral implementations than host ones.
+ *
+ * For these reasons and others, ** USE OF RNDIS IS STRONGLY DISCOURAGED ** in
+ * favor of such non-proprietary alternatives as CDC Ethernet or the newer (and
+ * currently rare) "Ethernet Emulation Model" (EEM).
  */
 
 /*
@@ -72,17 +86,17 @@ struct rndis_msg_hdr {
  */
 #define RNDIS_MSG_PACKET	ccpu2(0x00000001)	/* 1-N packets */
 #define RNDIS_MSG_INIT		ccpu2(0x00000002)
-#define RNDIS_MSG_INIT_C 	(RNDIS_MSG_INIT|RNDIS_MSG_COMPLETION)
+#define RNDIS_MSG_INIT_C	(RNDIS_MSG_INIT|RNDIS_MSG_COMPLETION)
 #define RNDIS_MSG_HALT		ccpu2(0x00000003)
 #define RNDIS_MSG_QUERY		ccpu2(0x00000004)
-#define RNDIS_MSG_QUERY_C 	(RNDIS_MSG_QUERY|RNDIS_MSG_COMPLETION)
+#define RNDIS_MSG_QUERY_C	(RNDIS_MSG_QUERY|RNDIS_MSG_COMPLETION)
 #define RNDIS_MSG_SET		ccpu2(0x00000005)
-#define RNDIS_MSG_SET_C 	(RNDIS_MSG_SET|RNDIS_MSG_COMPLETION)
+#define RNDIS_MSG_SET_C		(RNDIS_MSG_SET|RNDIS_MSG_COMPLETION)
 #define RNDIS_MSG_RESET		ccpu2(0x00000006)
-#define RNDIS_MSG_RESET_C 	(RNDIS_MSG_RESET|RNDIS_MSG_COMPLETION)
+#define RNDIS_MSG_RESET_C	(RNDIS_MSG_RESET|RNDIS_MSG_COMPLETION)
 #define RNDIS_MSG_INDICATE	ccpu2(0x00000007)
 #define RNDIS_MSG_KEEPALIVE	ccpu2(0x00000008)
-#define RNDIS_MSG_KEEPALIVE_C 	(RNDIS_MSG_KEEPALIVE|RNDIS_MSG_COMPLETION)
+#define RNDIS_MSG_KEEPALIVE_C	(RNDIS_MSG_KEEPALIVE|RNDIS_MSG_COMPLETION)
 
 /* codes for "status" field of completion messages */
 #define	RNDIS_STATUS_SUCCESS		ccpu2(0x00000000)
@@ -596,13 +610,13 @@ static struct usb_driver rndis_driver = {
 
 static int __init rndis_init(void)
 {
- 	return usb_register(&rndis_driver);
+	return usb_register(&rndis_driver);
 }
 module_init(rndis_init);
 
 static void __exit rndis_exit(void)
 {
- 	usb_deregister(&rndis_driver);
+	usb_deregister(&rndis_driver);
 }
 module_exit(rndis_exit);
 
diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
index 5a8a2c91c2b2..5c60be521561 100644
--- a/drivers/usb/serial/Kconfig
+++ b/drivers/usb/serial/Kconfig
@@ -71,6 +71,16 @@ config USB_SERIAL_ANYDATA
 	  To compile this driver as a module, choose M here: the
 	  module will be called anydata.
 
+config USB_SERIAL_ARK3116
+	tristate "USB ARK Micro 3116 USB Serial Driver (EXPERIMENTAL)"
+	depends on USB_SERIAL && EXPERIMENTAL
+	help
+	  Say Y here if you want to use a ARK Micro 3116 USB to Serial
+	  device.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ark3116
+
 config USB_SERIAL_BELKIN
 	tristate "USB Belkin and Peracom Single Port Serial Driver"
 	depends on USB_SERIAL
@@ -158,6 +168,15 @@ config USB_SERIAL_FTDI_SIO
 	  To compile this driver as a module, choose M here: the
 	  module will be called ftdi_sio.
 
+config USB_SERIAL_FUNSOFT
+	tristate "USB Fundamental Software Dongle Driver"
+	depends on USB_SERIAL
+	---help---
+	  Say Y here if you want to use the Fundamental Software dongle.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called funsoft.
+
 config USB_SERIAL_VISOR
 	tristate "USB Handspring Visor / Palm m50x / Sony Clie Driver"
 	depends on USB_SERIAL
diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile
index f7fe4172efed..5a0960fc9d3e 100644
--- a/drivers/usb/serial/Makefile
+++ b/drivers/usb/serial/Makefile
@@ -13,6 +13,7 @@ usbserial-objs	:= usb-serial.o generic.o bus.o $(usbserial-obj-y)
 
 obj-$(CONFIG_USB_SERIAL_AIRPRIME)		+= airprime.o
 obj-$(CONFIG_USB_SERIAL_ANYDATA)		+= anydata.o
+obj-$(CONFIG_USB_SERIAL_ARK3116)		+= ark3116.o
 obj-$(CONFIG_USB_SERIAL_BELKIN)			+= belkin_sa.o
 obj-$(CONFIG_USB_SERIAL_CP2101)			+= cp2101.o
 obj-$(CONFIG_USB_SERIAL_CYBERJACK)		+= cyberjack.o
@@ -22,6 +23,7 @@ obj-$(CONFIG_USB_SERIAL_EDGEPORT)		+= io_edgeport.o
 obj-$(CONFIG_USB_SERIAL_EDGEPORT_TI)		+= io_ti.o
 obj-$(CONFIG_USB_SERIAL_EMPEG)			+= empeg.o
 obj-$(CONFIG_USB_SERIAL_FTDI_SIO)		+= ftdi_sio.o
+obj-$(CONFIG_USB_SERIAL_FUNSOFT)		+= funsoft.o
 obj-$(CONFIG_USB_SERIAL_GARMIN)			+= garmin_gps.o
 obj-$(CONFIG_USB_SERIAL_HP4X)			+= hp4x.o
 obj-$(CONFIG_USB_SERIAL_IPAQ)			+= ipaq.o
diff --git a/drivers/usb/serial/airprime.c b/drivers/usb/serial/airprime.c
index dbf1f063098c..694b205f9b73 100644
--- a/drivers/usb/serial/airprime.c
+++ b/drivers/usb/serial/airprime.c
@@ -18,6 +18,7 @@
 static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(0xf3d, 0x0112) },  /* AirPrime CDMA Wireless PC Card */
 	{ USB_DEVICE(0x1410, 0x1110) }, /* Novatel Wireless Merlin CDMA */
+	{ USB_DEVICE(0x1199, 0x0112) }, /* Sierra Wireless Aircard 580 */
 	{ },
 };
 MODULE_DEVICE_TABLE(usb, id_table);
diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c
new file mode 100644
index 000000000000..8dec796222a0
--- /dev/null
+++ b/drivers/usb/serial/ark3116.c
@@ -0,0 +1,465 @@
+/*
+ * ark3116
+ * - implements a driver for the arkmicro ark3116 chipset (vendor=0x6547,
+ *   productid=0x0232) (used in a datacable called KQ-U8A)
+ *
+ * - based on code by krisfx -> thanks !!
+ *   (see http://www.linuxquestions.org/questions/showthread.php?p=2184457#post2184457)
+ *
+ *  - based on logs created by usbsnoopy
+ *
+ *  Author   : Simon Schulz [ark3116_driver<AT>auctionant.de]
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/tty.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include "usb-serial.h"
+
+
+static int debug;
+
+static struct usb_device_id id_table [] = {
+	{ USB_DEVICE(0x6547, 0x0232) },
+	{ },
+};
+MODULE_DEVICE_TABLE(usb, id_table);
+
+struct ark3116_private {
+	spinlock_t lock;
+	u8 termios_initialized;
+};
+
+static inline void ARK3116_SND(struct usb_serial *serial, int seq,
+			       __u8 request, __u8 requesttype,
+			       __u16 value, __u16 index)
+{
+	int result;
+	result = usb_control_msg(serial->dev,
+				 usb_sndctrlpipe(serial->dev,0),
+				 request, requesttype, value, index,
+				 NULL,0x00, 1000);
+	dbg("%03d > ok",seq);
+}
+
+static inline void ARK3116_RCV(struct usb_serial *serial, int seq,
+			       __u8 request, __u8 requesttype,
+			       __u16 value, __u16 index, __u8 expected,
+			       char *buf)
+{
+	int result;
+	result = usb_control_msg(serial->dev,
+			      usb_rcvctrlpipe(serial->dev,0),
+			      request, requesttype, value, index,
+			      buf, 0x0000001, 1000);
+	if (result)
+		dbg("%03d < %d bytes [0x%02X]",seq, result, buf[0]);
+	else
+		dbg("%03d < 0 bytes", seq);
+}
+
+
+static inline void ARK3116_RCV_QUIET(struct usb_serial *serial,
+				     __u8 request, __u8 requesttype,
+				     __u16 value, __u16 index, char *buf)
+{
+	usb_control_msg(serial->dev,
+			usb_rcvctrlpipe(serial->dev,0),
+			request, requesttype, value, index,
+			buf, 0x0000001, 1000);
+}
+
+
+static int ark3116_attach(struct usb_serial *serial)
+{
+	char *buf;
+	struct ark3116_private *priv;
+	int i;
+
+	for (i = 0; i < serial->num_ports; ++i) {
+		priv = kmalloc (sizeof (struct ark3116_private), GFP_KERNEL);
+		if (!priv)
+			goto cleanup;
+		memset (priv, 0x00, sizeof (struct ark3116_private));
+		spin_lock_init(&priv->lock);
+
+		usb_set_serial_port_data(serial->port[i], priv);
+	}
+
+	buf = kmalloc(1, GFP_KERNEL);
+	if (!buf) {
+		dbg("error kmalloc -> out of mem ?");
+		goto cleanup;
+	}
+
+	/* 3 */
+	ARK3116_SND(serial, 3,0xFE,0x40,0x0008,0x0002);
+	ARK3116_SND(serial, 4,0xFE,0x40,0x0008,0x0001);
+	ARK3116_SND(serial, 5,0xFE,0x40,0x0000,0x0008);
+	ARK3116_SND(serial, 6,0xFE,0x40,0x0000,0x000B);
+
+	/* <-- seq7 */
+	ARK3116_RCV(serial, 7,0xFE,0xC0,0x0000,0x0003, 0x00, buf);
+	ARK3116_SND(serial, 8,0xFE,0x40,0x0080,0x0003);
+	ARK3116_SND(serial, 9,0xFE,0x40,0x001A,0x0000);
+	ARK3116_SND(serial,10,0xFE,0x40,0x0000,0x0001);
+	ARK3116_SND(serial,11,0xFE,0x40,0x0000,0x0003);
+
+	/* <-- seq12 */
+	ARK3116_RCV(serial,12,0xFE,0xC0,0x0000,0x0004, 0x00, buf);
+	ARK3116_SND(serial,13,0xFE,0x40,0x0000,0x0004);
+
+	/* 14 */
+	ARK3116_RCV(serial,14,0xFE,0xC0,0x0000,0x0004, 0x00, buf);
+	ARK3116_SND(serial,15,0xFE,0x40,0x0000,0x0004);
+
+	/* 16 */
+	ARK3116_RCV(serial,16,0xFE,0xC0,0x0000,0x0004, 0x00, buf);
+	/* --> seq17 */
+	ARK3116_SND(serial,17,0xFE,0x40,0x0001,0x0004);
+
+	/* <-- seq18 */
+	ARK3116_RCV(serial,18,0xFE,0xC0,0x0000,0x0004, 0x01, buf);
+
+	/* --> seq19 */
+	ARK3116_SND(serial,19,0xFE,0x40,0x0003,0x0004);
+
+
+	/* <-- seq20 */
+	/* seems like serial port status info (RTS, CTS,...) */
+	/* returns modem control line status ?! */
+	ARK3116_RCV(serial,20,0xFE,0xC0,0x0000,0x0006, 0xFF, buf);
+
+	/* set 9600 baud & do some init ?! */
+	ARK3116_SND(serial,147,0xFE,0x40,0x0083,0x0003);
+	ARK3116_SND(serial,148,0xFE,0x40,0x0038,0x0000);
+	ARK3116_SND(serial,149,0xFE,0x40,0x0001,0x0001);
+	ARK3116_SND(serial,150,0xFE,0x40,0x0003,0x0003);
+	ARK3116_RCV(serial,151,0xFE,0xC0,0x0000,0x0004,0x03, buf);
+	ARK3116_SND(serial,152,0xFE,0x40,0x0000,0x0003);
+	ARK3116_RCV(serial,153,0xFE,0xC0,0x0000,0x0003,0x00, buf);
+	ARK3116_SND(serial,154,0xFE,0x40,0x0003,0x0003);
+
+	kfree(buf);
+	return(0);
+
+cleanup:
+	for (--i; i>=0; --i)
+		usb_set_serial_port_data(serial->port[i], NULL);
+	return -ENOMEM;
+}
+
+static void ark3116_set_termios(struct usb_serial_port *port,
+				struct termios *old_termios)
+{
+	struct usb_serial *serial = port->serial;
+	struct ark3116_private *priv = usb_get_serial_port_data(port);
+	unsigned int cflag = port->tty->termios->c_cflag;
+	unsigned long flags;
+	int baud;
+	int ark3116_baud;
+	char *buf;
+	char config;
+
+	config = 0;
+
+	dbg("%s - port %d", __FUNCTION__, port->number);
+
+	if ((!port->tty) || (!port->tty->termios)) {
+		dbg("%s - no tty structures", __FUNCTION__);
+		return;
+	}
+
+	spin_lock_irqsave(&priv->lock, flags);
+	if (!priv->termios_initialized) {
+		*(port->tty->termios) = tty_std_termios;
+		port->tty->termios->c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL;
+		priv->termios_initialized = 1;
+	}
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	cflag = port->tty->termios->c_cflag;
+
+	/* check that they really want us to change something: */
+	if (old_termios) {
+		if ((cflag == old_termios->c_cflag) &&
+		    (RELEVANT_IFLAG(port->tty->termios->c_iflag) ==
+		     RELEVANT_IFLAG(old_termios->c_iflag))) {
+			dbg("%s - nothing to change...", __FUNCTION__);
+			return;
+		}
+	}
+
+	buf = kmalloc(1, GFP_KERNEL);
+	if (!buf) {
+		dbg("error kmalloc");
+		return;
+	}
+
+	/* set data bit count (8/7/6/5) */
+	if (cflag & CSIZE){
+		switch (cflag & CSIZE){
+		case CS5:
+			config |= 0x00;
+			dbg("setting CS5");
+			break;
+		case CS6:
+			config |= 0x01;
+			dbg("setting CS6");
+			break;
+		case CS7:
+			config |= 0x02;
+			dbg("setting CS7");
+			break;
+		default:
+			err ("CSIZE was set but not CS5-CS8, using CS8!");
+		case CS8:
+			config |= 0x03;
+			dbg("setting CS8");
+			break;
+		}
+	}
+
+	/* set parity (NONE,EVEN,ODD) */
+	if (cflag & PARENB){
+		if (cflag & PARODD) {
+			config |= 0x08;
+			dbg("setting parity to ODD");
+		} else {
+			config |= 0x18;
+			dbg("setting parity to EVEN");
+		}
+	} else {
+		dbg("setting parity to NONE");
+	}
+
+	/* SET STOPBIT (1/2) */
+	if (cflag & CSTOPB) {
+		config |= 0x04;
+		dbg ("setting 2 stop bits");
+	} else {
+		dbg ("setting 1 stop bit");
+	}
+
+
+	/* set baudrate: */
+	baud = 0;
+	switch (cflag & CBAUD){
+		case B0:
+			err("can't set 0baud, using 9600 instead");
+			break;
+		case B75:	baud = 75;	break;
+		case B150:	baud = 150;	break;
+		case B300:	baud = 300;	break;
+		case B600:	baud = 600;	break;
+		case B1200:	baud = 1200;	break;
+		case B1800:	baud = 1800;	break;
+		case B2400:	baud = 2400;	break;
+		case B4800:	baud = 4800;	break;
+		case B9600:	baud = 9600;	break;
+		case B19200:	baud = 19200;	break;
+		case B38400:	baud = 38400;	break;
+		case B57600:	baud = 57600;	break;
+		case B115200:	baud = 115200;	break;
+		case B230400:	baud = 230400;	break;
+		case B460800:	baud = 460800;	break;
+		default:
+			dbg("does not support the baudrate requested (fix it)");
+			break;
+	}
+
+	/* set 9600 as default (if given baudrate is invalid for example) */
+	if (baud == 0)
+		baud = 9600;
+
+	/*
+	 * found by try'n'error, be careful, maybe there are other options
+	 * for multiplicator etc!
+	 */
+	if (baud == 460800)
+		/* strange, for 460800 the formula is wrong
+		 * (dont use round(), then 9600baud is wrong) */
+		ark3116_baud = 7;
+	else
+		ark3116_baud = 3000000 / baud;
+
+	/* ? */
+	ARK3116_RCV(serial,0,0xFE,0xC0,0x0000,0x0003, 0x03, buf);
+	/* offset = buf[0]; */
+	/* offset = 0x03; */
+	/* dbg("using 0x%04X as target for 0x0003:",0x0080+offset); */
+
+
+	/* set baudrate */
+	dbg("setting baudrate to %d (->reg=%d)",baud,ark3116_baud);
+	ARK3116_SND(serial,147,0xFE,0x40,0x0083,0x0003);
+	ARK3116_SND(serial,148,0xFE,0x40,(ark3116_baud & 0x00FF)   ,0x0000);
+	ARK3116_SND(serial,149,0xFE,0x40,(ark3116_baud & 0xFF00)>>8,0x0001);
+	ARK3116_SND(serial,150,0xFE,0x40,0x0003,0x0003);
+
+	/* ? */
+	ARK3116_RCV(serial,151,0xFE,0xC0,0x0000,0x0004,0x03, buf);
+	ARK3116_SND(serial,152,0xFE,0x40,0x0000,0x0003);
+
+	/* set data bit count, stop bit count & parity: */
+	dbg("updating bit count, stop bit or parity (cfg=0x%02X)", config);
+	ARK3116_RCV(serial,153,0xFE,0xC0,0x0000,0x0003,0x00, buf);
+	ARK3116_SND(serial,154,0xFE,0x40,config,0x0003);
+
+	if (cflag & CRTSCTS)
+		dbg("CRTSCTS not supported by chipset ?!");
+
+	/* TEST ARK3116_SND(154,0xFE,0x40,0xFFFF, 0x0006); */
+
+	kfree(buf);
+	return;
+}
+
+static int ark3116_open(struct usb_serial_port *port, struct file *filp)
+{
+	struct termios tmp_termios;
+	struct usb_serial *serial = port->serial;
+	char *buf;
+	int result = 0;
+
+	dbg("%s -  port %d", __FUNCTION__, port->number);
+
+	buf = kmalloc(1, GFP_KERNEL);
+	if (!buf) {
+		dbg("error kmalloc -> out of mem ?");
+		return -ENOMEM;
+	}
+
+	result = usb_serial_generic_open(port, filp);
+	if (result)
+		return result;
+
+	/* open */
+	ARK3116_RCV(serial,111,0xFE,0xC0,0x0000,0x0003, 0x02, buf);
+
+	ARK3116_SND(serial,112,0xFE,0x40,0x0082,0x0003);
+	ARK3116_SND(serial,113,0xFE,0x40,0x001A,0x0000);
+	ARK3116_SND(serial,114,0xFE,0x40,0x0000,0x0001);
+	ARK3116_SND(serial,115,0xFE,0x40,0x0002,0x0003);
+
+	ARK3116_RCV(serial,116,0xFE,0xC0,0x0000,0x0004, 0x03, buf);
+	ARK3116_SND(serial,117,0xFE,0x40,0x0002,0x0004);
+
+	ARK3116_RCV(serial,118,0xFE,0xC0,0x0000,0x0004, 0x02, buf);
+	ARK3116_SND(serial,119,0xFE,0x40,0x0000,0x0004);
+
+	ARK3116_RCV(serial,120,0xFE,0xC0,0x0000,0x0004, 0x00, buf);
+
+	ARK3116_SND(serial,121,0xFE,0x40,0x0001,0x0004);
+
+	ARK3116_RCV(serial,122,0xFE,0xC0,0x0000,0x0004, 0x01, buf);
+
+	ARK3116_SND(serial,123,0xFE,0x40,0x0003,0x0004);
+
+	/* returns different values (control lines ?!) */
+	ARK3116_RCV(serial,124,0xFE,0xC0,0x0000,0x0006, 0xFF, buf);
+
+	/* initialise termios: */
+	if (port->tty)
+		ark3116_set_termios(port, &tmp_termios);
+
+	kfree(buf);
+
+	return result;
+
+}
+
+static int ark3116_ioctl(struct usb_serial_port *port, struct file *file,
+			 unsigned int cmd, unsigned long arg)
+{
+	dbg("ioctl not supported yet...");
+	return -ENOIOCTLCMD;
+}
+
+static int ark3116_tiocmget(struct usb_serial_port *port, struct file *file)
+{
+	struct usb_serial *serial = port->serial;
+	char *buf;
+	char temp;
+
+	/* seems like serial port status info (RTS, CTS,...) is stored
+	 * in reg(?) 0x0006
+	 * pcb connection point 11 = GND -> sets bit4 of response
+	 * pcb connection point  7 = GND -> sets bit6 of response
+	 */
+
+	buf = kmalloc(1, GFP_KERNEL);
+	if (!buf) {
+		dbg("error kmalloc");
+		return -ENOMEM;
+	}
+
+	/* read register: */
+	ARK3116_RCV_QUIET(serial,0xFE,0xC0,0x0000,0x0006,buf);
+	temp = buf[0];
+	kfree(buf);
+
+	/* i do not really know if bit4=CTS and bit6=DSR... was just a
+	 * quick guess !!
+	 */
+	return  (temp & (1<<4) ? TIOCM_CTS : 0) |
+	        (temp & (1<<6) ? TIOCM_DSR : 0);
+}
+
+static struct usb_driver ark3116_driver = {
+	.name =		"ark3116",
+	.probe =	usb_serial_probe,
+	.disconnect =	usb_serial_disconnect,
+	.id_table =	id_table,
+};
+
+static struct usb_serial_driver ark3116_device = {
+	.driver = {
+		.owner =	THIS_MODULE,
+		.name =		"ark3116",
+	},
+	.id_table =		id_table,
+	.num_interrupt_in =	1,
+	.num_bulk_in =		1,
+	.num_bulk_out =		1,
+	.num_ports =		1,
+	.attach =		ark3116_attach,
+	.set_termios =		ark3116_set_termios,
+	.ioctl =		ark3116_ioctl,
+	.tiocmget =		ark3116_tiocmget,
+	.open =			ark3116_open,
+};
+
+static int __init ark3116_init(void)
+{
+	int retval;
+
+	retval = usb_serial_register(&ark3116_device);
+	if (retval)
+		return retval;
+	retval = usb_register(&ark3116_driver);
+	if (retval)
+		usb_serial_deregister(&ark3116_device);
+	return retval;
+}
+
+static void __exit ark3116_exit(void)
+{
+	usb_deregister(&ark3116_driver);
+	usb_serial_deregister(&ark3116_device);
+}
+
+module_init(ark3116_init);
+module_exit(ark3116_exit);
+MODULE_LICENSE("GPL");
+
+module_param(debug, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Debug enabled or not");
+
diff --git a/drivers/usb/serial/console.c b/drivers/usb/serial/console.c
index 167f8ec56131..8023bb7279b1 100644
--- a/drivers/usb/serial/console.c
+++ b/drivers/usb/serial/console.c
@@ -54,7 +54,7 @@ static struct console usbcons;
  * serial.c code, except that the specifier is "ttyUSB" instead
  * of "ttyS".
  */
-static int __init usb_console_setup(struct console *co, char *options)
+static int usb_console_setup(struct console *co, char *options)
 {
 	struct usbcons_info *info = &usbcons_info;
 	int baud = 9600;
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index f3af81b4dd29..986d7622273d 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -307,7 +307,9 @@ static struct ftdi_sio_quirk ftdi_HE_TIRA1_quirk = {
 
 
 static struct usb_device_id id_table_combined [] = {
+	{ USB_DEVICE(FTDI_VID, FTDI_ACTZWAVE_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_IRTRANS_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_IPLUS_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_SIO_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_8U232AM_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_8U232AM_ALT_PID) },
@@ -489,10 +491,15 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(KOBIL_VID, KOBIL_CONV_KAAN_PID) },
 	{ USB_DEVICE(POSIFLEX_VID, POSIFLEX_PP7000_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_TTUSB_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ECLO_COM_1WIRE_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_WESTREX_MODEL_777_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_WESTREX_MODEL_8900F_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_PCDJ_DAC2_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_RRCIRKITS_LOCOBUFFER_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ASK_RDR400_PID) },
 	{ USB_DEVICE(ICOM_ID1_VID, ICOM_ID1_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_TMU_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ACG_HFDUAL_PID) },
 	{ },					/* Optional parameter entry */
 	{ }					/* Terminating entry */
 };
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index 8da773c2744d..d69a917e768f 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -32,6 +32,10 @@
 #define FTDI_NF_RIC_PID	0x0001	/* Product Id */
 
 
+/* ACT Solutions HomePro ZWave interface (http://www.act-solutions.com/HomePro.htm) */
+#define FTDI_ACTZWAVE_PID	0xF2D0
+
+
 /* www.irtrans.de device */
 #define FTDI_IRTRANS_PID 0xFC60 /* Product Id */
 
@@ -39,6 +43,9 @@
 /* www.thoughttechnology.com/ TT-USB provide with procomp use ftdi_sio */
 #define FTDI_TTUSB_PID 0xFF20 /* Product Id */
 
+/* iPlus device */
+#define FTDI_IPLUS_PID 0xD070 /* Product Id */
+
 /* www.crystalfontz.com devices - thanx for providing free devices for evaluation ! */
 /* they use the ftdi chipset for the USB interface and the vendor id is the same */
 #define FTDI_XF_632_PID 0xFC08	/* 632: 16x2 Character Display */
@@ -153,6 +160,11 @@
 #define ICOM_ID1_PID            0x0004
 
 /*
+ * ASK.fr devices
+ */
+#define FTDI_ASK_RDR400_PID	0xC991	/* ASK RDR 400 series card reader */
+
+/*
  * DSS-20 Sync Station for Sony Ericsson P800
  */
  
@@ -399,6 +411,31 @@
 #define FTDI_WESTREX_MODEL_777_PID	0xDC00	/* Model 777 */
 #define FTDI_WESTREX_MODEL_8900F_PID	0xDC01	/* Model 8900F */
 
+/*
+ * RR-CirKits LocoBuffer USB (http://www.rr-cirkits.com)
+ */
+#define FTDI_RRCIRKITS_LOCOBUFFER_PID	0xc7d0	/* LocoBuffer USB */
+
+/*
+ * Eclo (http://www.eclo.pt/) product IDs.
+ * PID 0xEA90 submitted by Martin Grill.
+ */
+#define FTDI_ECLO_COM_1WIRE_PID	0xEA90	/* COM to 1-Wire USB adaptor */
+
+/*
+ * Papouch products (http://www.papouch.com/)
+ * Submitted by Folkert van Heusden
+ */
+
+#define PAPOUCH_VID			0x5050	/* Vendor ID */
+#define PAPOUCH_TMU_PID			0x0400	/* TMU USB Thermometer */
+
+/*
+ * ACG Identification Technologies GmbH products (http://www.acg.de/).
+ * Submitted by anton -at- goto10 -dot- org.
+ */
+#define FTDI_ACG_HFDUAL_PID		0xDD20	/* HF Dual ISO Reader (RFID) */
+
 /* Commands */
 #define FTDI_SIO_RESET 		0 /* Reset the port */
 #define FTDI_SIO_MODEM_CTRL 	1 /* Set the modem control register */
diff --git a/drivers/usb/serial/funsoft.c b/drivers/usb/serial/funsoft.c
new file mode 100644
index 000000000000..803721b97e2e
--- /dev/null
+++ b/drivers/usb/serial/funsoft.c
@@ -0,0 +1,65 @@
+/*
+ * Funsoft Serial USB driver
+ *
+ * Copyright (C) 2006 Greg Kroah-Hartman <gregkh@suse.de>
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License version
+ *	2 as published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/tty.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include "usb-serial.h"
+
+static struct usb_device_id id_table [] = {
+	{ USB_DEVICE(0x1404, 0xcddc) },
+	{ },
+};
+MODULE_DEVICE_TABLE(usb, id_table);
+
+static struct usb_driver funsoft_driver = {
+	.name =		"funsoft",
+	.probe =	usb_serial_probe,
+	.disconnect =	usb_serial_disconnect,
+	.id_table =	id_table,
+	.no_dynamic_id = 	1,
+};
+
+static struct usb_serial_driver funsoft_device = {
+	.driver = {
+		.owner =	THIS_MODULE,
+		.name =		"funsoft",
+	},
+	.id_table =		id_table,
+	.num_interrupt_in =	NUM_DONT_CARE,
+	.num_bulk_in =		NUM_DONT_CARE,
+	.num_bulk_out =		NUM_DONT_CARE,
+	.num_ports =		1,
+};
+
+static int __init funsoft_init(void)
+{
+	int retval;
+
+	retval = usb_serial_register(&funsoft_device);
+	if (retval)
+		return retval;
+	retval = usb_register(&funsoft_driver);
+	if (retval)
+		usb_serial_deregister(&funsoft_device);
+	return retval;
+}
+
+static void __exit funsoft_exit(void)
+{
+	usb_deregister(&funsoft_driver);
+	usb_serial_deregister(&funsoft_device);
+}
+
+module_init(funsoft_init);
+module_exit(funsoft_exit);
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c
index 476cda107f4f..c62cc2876519 100644
--- a/drivers/usb/serial/generic.c
+++ b/drivers/usb/serial/generic.c
@@ -138,6 +138,7 @@ int usb_serial_generic_open (struct usb_serial_port *port, struct file *filp)
 
 	return result;
 }
+EXPORT_SYMBOL_GPL(usb_serial_generic_open);
 
 static void generic_cleanup (struct usb_serial_port *port)
 {
diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c
index 4d40704dea2c..238033a87092 100644
--- a/drivers/usb/serial/omninet.c
+++ b/drivers/usb/serial/omninet.c
@@ -257,14 +257,14 @@ static int omninet_write (struct usb_serial_port *port, const unsigned char *buf
 		return (0);
 	}
 
-	spin_lock(&port->lock);
-	if (port->write_urb_busy) {
-		spin_unlock(&port->lock);
+	spin_lock(&wport->lock);
+	if (wport->write_urb_busy) {
+		spin_unlock(&wport->lock);
 		dbg("%s - already writing", __FUNCTION__);
 		return 0;
 	}
-	port->write_urb_busy = 1;
-	spin_unlock(&port->lock);
+	wport->write_urb_busy = 1;
+	spin_unlock(&wport->lock);
 
 	count = (count > OMNINET_BULKOUTSIZE) ? OMNINET_BULKOUTSIZE : count;
 
@@ -283,7 +283,7 @@ static int omninet_write (struct usb_serial_port *port, const unsigned char *buf
 	wport->write_urb->dev = serial->dev;
 	result = usb_submit_urb(wport->write_urb, GFP_ATOMIC);
 	if (result) {
-		port->write_urb_busy = 0;
+		wport->write_urb_busy = 0;
 		err("%s - failed submitting write urb, error %d", __FUNCTION__, result);
 	} else
 		result = count;
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index b3014fda645c..c96714bb1cb8 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -61,6 +61,7 @@ static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(ELCOM_VENDOR_ID, ELCOM_PRODUCT_ID) },
 	{ USB_DEVICE(ELCOM_VENDOR_ID, ELCOM_PRODUCT_ID_UCSGT) },
 	{ USB_DEVICE(ITEGNO_VENDOR_ID, ITEGNO_PRODUCT_ID) },
+	{ USB_DEVICE(ITEGNO_VENDOR_ID, ITEGNO_PRODUCT_ID_2080) },
 	{ USB_DEVICE(MA620_VENDOR_ID, MA620_PRODUCT_ID) },
 	{ USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID) },
 	{ USB_DEVICE(TRIPP_VENDOR_ID, TRIPP_PRODUCT_ID) },
@@ -78,6 +79,7 @@ static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(SAGEM_VENDOR_ID, SAGEM_PRODUCT_ID) },
 	{ USB_DEVICE(LEADTEK_VENDOR_ID, LEADTEK_9531_PRODUCT_ID) },
 	{ USB_DEVICE(SPEEDDRAGON_VENDOR_ID, SPEEDDRAGON_PRODUCT_ID) },
+	{ USB_DEVICE(OTI_VENDOR_ID, OTI_PRODUCT_ID) },
 	{ }					/* Terminating entry */
 };
 
diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h
index 77901d143979..7f29e81d3e35 100644
--- a/drivers/usb/serial/pl2303.h
+++ b/drivers/usb/serial/pl2303.h
@@ -26,6 +26,7 @@
 
 #define ITEGNO_VENDOR_ID	0x0eba
 #define ITEGNO_PRODUCT_ID	0x1080
+#define ITEGNO_PRODUCT_ID_2080	0x2080
 
 #define MA620_VENDOR_ID		0x0df7
 #define MA620_PRODUCT_ID	0x0620
@@ -79,3 +80,7 @@
 /* USB GSM cable from Speed Dragon Multimedia, Ltd */
 #define SPEEDDRAGON_VENDOR_ID	0x0e55
 #define SPEEDDRAGON_PRODUCT_ID	0x110b
+
+/* Ours Technology Inc DKU-5 clone, chipset: Prolific Technology Inc */
+#define OTI_VENDOR_ID	0x0ea0
+#define OTI_PRODUCT_ID	0x6858
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 097f4e8488fe..9c36f0ece20f 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -27,10 +27,10 @@
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/spinlock.h>
+#include <linux/mutex.h>
 #include <linux/list.h>
 #include <linux/smp_lock.h>
 #include <asm/uaccess.h>
-#include <asm/semaphore.h>
 #include <linux/usb.h>
 #include "usb-serial.h"
 #include "pl2303.h"
@@ -189,11 +189,15 @@ static int serial_open (struct tty_struct *tty, struct file * filp)
 
 	portNumber = tty->index - serial->minor;
 	port = serial->port[portNumber];
-	if (!port)
-		return -ENODEV;
+	if (!port) {
+		retval = -ENODEV;
+		goto bailout_kref_put;
+	}
 
-	if (down_interruptible(&port->sem))
-		return -ERESTARTSYS;
+	if (mutex_lock_interruptible(&port->mutex)) {
+		retval = -ERESTARTSYS;
+		goto bailout_kref_put;
+	}
 	 
 	++port->open_count;
 
@@ -209,7 +213,7 @@ static int serial_open (struct tty_struct *tty, struct file * filp)
 		 * safe because we are called with BKL held */
 		if (!try_module_get(serial->type->driver.owner)) {
 			retval = -ENODEV;
-			goto bailout_kref_put;
+			goto bailout_mutex_unlock;
 		}
 
 		/* only call the device specific open if this 
@@ -219,15 +223,16 @@ static int serial_open (struct tty_struct *tty, struct file * filp)
 			goto bailout_module_put;
 	}
 
-	up(&port->sem);
+	mutex_unlock(&port->mutex);
 	return 0;
 
 bailout_module_put:
 	module_put(serial->type->driver.owner);
+bailout_mutex_unlock:
+	port->open_count = 0;
+	mutex_unlock(&port->mutex);
 bailout_kref_put:
 	kref_put(&serial->kref, destroy_serial);
-	port->open_count = 0;
-	up(&port->sem);
 	return retval;
 }
 
@@ -240,10 +245,10 @@ static void serial_close(struct tty_struct *tty, struct file * filp)
 
 	dbg("%s - port %d", __FUNCTION__, port->number);
 
-	down(&port->sem);
+	mutex_lock(&port->mutex);
 
 	if (port->open_count == 0) {
-		up(&port->sem);
+		mutex_unlock(&port->mutex);
 		return;
 	}
 
@@ -262,7 +267,7 @@ static void serial_close(struct tty_struct *tty, struct file * filp)
 		module_put(port->serial->type->driver.owner);
 	}
 
-	up(&port->sem);
+	mutex_unlock(&port->mutex);
 	kref_put(&port->serial->kref, destroy_serial);
 }
 
@@ -783,7 +788,7 @@ int usb_serial_probe(struct usb_interface *interface,
 		port->number = i + serial->minor;
 		port->serial = serial;
 		spin_lock_init(&port->lock);
-		sema_init(&port->sem, 1);
+		mutex_init(&port->mutex);
 		INIT_WORK(&port->work, usb_serial_port_softint, port);
 		serial->port[i] = port;
 	}
diff --git a/drivers/usb/serial/usb-serial.h b/drivers/usb/serial/usb-serial.h
index d7d27c3385b3..dc89d8710460 100644
--- a/drivers/usb/serial/usb-serial.h
+++ b/drivers/usb/serial/usb-serial.h
@@ -16,7 +16,7 @@
 
 #include <linux/config.h>
 #include <linux/kref.h>
-#include <asm/semaphore.h>
+#include <linux/mutex.h>
 
 #define SERIAL_TTY_MAJOR	188	/* Nice legal number now */
 #define SERIAL_TTY_MINORS	255	/* loads of devices :) */
@@ -31,7 +31,7 @@
  * @serial: pointer back to the struct usb_serial owner of this port.
  * @tty: pointer to the corresponding tty for this port.
  * @lock: spinlock to grab when updating portions of this structure.
- * @sem: semaphore used to synchronize serial_open() and serial_close()
+ * @mutex: mutex used to synchronize serial_open() and serial_close()
  *	access for this port.
  * @number: the number of the port (the minor number).
  * @interrupt_in_buffer: pointer to the interrupt in buffer for this port.
@@ -63,7 +63,7 @@ struct usb_serial_port {
 	struct usb_serial *	serial;
 	struct tty_struct *	tty;
 	spinlock_t		lock;
-	struct semaphore        sem;
+	struct mutex            mutex;
 	unsigned char		number;
 
 	unsigned char *		interrupt_in_buffer;
diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c
index 557411c6e7c7..f806553cd9a4 100644
--- a/drivers/usb/serial/whiteheat.c
+++ b/drivers/usb/serial/whiteheat.c
@@ -508,6 +508,7 @@ no_firmware:
 	err("%s: Unable to retrieve firmware version, try replugging\n", serial->type->description);
 	err("%s: If the firmware is not running (status led not blinking)\n", serial->type->description);
 	err("%s: please contact support@connecttech.com\n", serial->type->description);
+	kfree(result);
 	return -ENODEV;
 
 no_command_private:
diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig
index 92be101feba7..be9eec225743 100644
--- a/drivers/usb/storage/Kconfig
+++ b/drivers/usb/storage/Kconfig
@@ -48,7 +48,8 @@ config USB_STORAGE_FREECOM
 
 config USB_STORAGE_ISD200
 	bool "ISD-200 USB/ATA Bridge support"
-	depends on USB_STORAGE && BLK_DEV_IDE
+	depends on USB_STORAGE
+	depends on BLK_DEV_IDE=y || BLK_DEV_IDE=USB_STORAGE
 	---help---
 	  Say Y here if you want to use USB Mass Store devices based
 	  on the In-Systems Design ISD-200 USB/ATA bridge.
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index c4a9dcff5f2b..aec5ea8682d5 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -411,7 +411,7 @@ UNUSUAL_DEV(  0x050d, 0x0115, 0x0133, 0x0133,
 UNUSUAL_DEV(  0x0525, 0xa140, 0x0100, 0x0100,
 		"Iomega",
 		"USB Clik! 40",
-		US_SC_8070, US_PR_BULK, NULL,
+		US_SC_8070, US_PR_DEVICE, NULL,
 		US_FL_FIX_INQUIRY ),
 
 /* Yakumo Mega Image 37
@@ -773,6 +773,13 @@ UNUSUAL_DEV(  0x069b, 0x3004, 0x0001, 0x0001,
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_FIX_CAPACITY ),
 
+/* Reported by Olivier Blondeau <zeitoun@gmail.com> */
+UNUSUAL_DEV(  0x0727, 0x0306, 0x0100, 0x0100,
+		"ATMEL",
+		"SND1 Storage",
+		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		US_FL_IGNORE_RESIDUE),
+
 /* Submitted by Roman Hodek <roman@hodek.net> */
 UNUSUAL_DEV(  0x0781, 0x0001, 0x0200, 0x0200,
 		"Sandisk",
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 9060e7137441..4587087d777a 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -400,6 +400,8 @@ config FB_ASILIANT
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
+	help
+	  This is the frame buffer device driver for the Asiliant 69030 chipset
 
 config FB_IMSTT
 	bool "IMS Twin Turbo display support"
diff --git a/drivers/video/aty/radeon_base.c b/drivers/video/aty/radeon_base.c
index 9a6b5b39b88e..387a18a47ac2 100644
--- a/drivers/video/aty/radeon_base.c
+++ b/drivers/video/aty/radeon_base.c
@@ -2265,7 +2265,7 @@ static struct bin_attribute edid2_attr = {
 };
 
 
-static int radeonfb_pci_register (struct pci_dev *pdev,
+static int __devinit radeonfb_pci_register (struct pci_dev *pdev,
 				  const struct pci_device_id *ent)
 {
 	struct fb_info *info;
diff --git a/drivers/video/au1100fb.c b/drivers/video/au1100fb.c
index 3d04b2def0f1..789450bb0bc9 100644
--- a/drivers/video/au1100fb.c
+++ b/drivers/video/au1100fb.c
@@ -214,10 +214,13 @@ int au1100fb_setmode(struct au1100fb_device *fbdev)
  */
 int au1100fb_fb_setcolreg(unsigned regno, unsigned red, unsigned green, unsigned blue, unsigned transp, struct fb_info *fbi)
 {
-	struct au1100fb_device *fbdev = to_au1100fb_device(fbi);
-	u32 *palette = fbdev->regs->lcd_pallettebase;
+	struct au1100fb_device *fbdev;
+	u32 *palette;
 	u32 value;
 
+	fbdev = to_au1100fb_device(fbi);
+	palette = fbdev->regs->lcd_pallettebase;
+
 	if (regno > (AU1100_LCD_NBR_PALETTE_ENTRIES - 1))
 		return -EINVAL;
 
@@ -316,9 +319,11 @@ int au1100fb_fb_blank(int blank_mode, struct fb_info *fbi)
  */
 int au1100fb_fb_pan_display(struct fb_var_screeninfo *var, struct fb_info *fbi)
 {
-	struct au1100fb_device *fbdev = to_au1100fb_device(fbi);
+	struct au1100fb_device *fbdev;
 	int dy;
 
+	fbdev = to_au1100fb_device(fbi);
+
 	print_dbg("fb_pan_display %p %p", var, fbi);
 
 	if (!var || !fbdev) {
@@ -382,10 +387,12 @@ void au1100fb_fb_rotate(struct fb_info *fbi, int angle)
  */
 int au1100fb_fb_mmap(struct fb_info *fbi, struct vm_area_struct *vma)
 {
-	struct au1100fb_device *fbdev = to_au1100fb_device(fbi);
+	struct au1100fb_device *fbdev;
 	unsigned int len;
 	unsigned long start=0, off;
 
+	fbdev = to_au1100fb_device(fbi);
+
 	if (vma->vm_pgoff > (~0UL >> PAGE_SHIFT)) {
 		return -EINVAL;
 	}
@@ -467,7 +474,7 @@ int au1100fb_drv_probe(struct device *dev)
 
 	if (!request_mem_region(au1100fb_fix.mmio_start, au1100fb_fix.mmio_len,
 				DRIVER_NAME)) {
-		print_err("fail to lock memory region at 0x%08x",
+		print_err("fail to lock memory region at 0x%08lx",
 				au1100fb_fix.mmio_start);
 		return -EBUSY;
 	}
@@ -595,13 +602,13 @@ int au1100fb_drv_remove(struct device *dev)
 	return 0;
 }
 
-int au1100fb_drv_suspend(struct device *dev, u32 state, u32 level)
+int au1100fb_drv_suspend(struct device *dev, pm_message_t state)
 {
 	/* TODO */
 	return 0;
 }
 
-int au1100fb_drv_resume(struct device *dev, u32 level)
+int au1100fb_drv_resume(struct device *dev)
 {
 	/* TODO */
 	return 0;
diff --git a/drivers/video/au1200fb.c b/drivers/video/au1200fb.c
index b367de30b98c..600d3e0e08b7 100644
--- a/drivers/video/au1200fb.c
+++ b/drivers/video/au1200fb.c
@@ -1920,1925 +1920,3 @@ module_exit(au1200fb_cleanup);
 
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE("GPL");
-/*
- * BRIEF MODULE DESCRIPTION
- *	Au1200 LCD Driver.
- *
- * Copyright 2004-2005 AMD
- * Author: AMD
- *
- * Based on:
- * linux/drivers/video/skeletonfb.c -- Skeleton for a frame buffer device
- *  Created 28 Dec 1997 by Geert Uytterhoeven
- *
- *  This program is free software; you can redistribute	 it and/or modify it
- *  under  the terms of	 the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the	License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED	  ``AS	IS'' AND   ANY	EXPRESS OR IMPLIED
- *  WARRANTIES,	  INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO	EVENT  SHALL   THE AUTHOR  BE	 LIABLE FOR ANY	  DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED	  TO, PROCUREMENT OF  SUBSTITUTE GOODS	OR SERVICES; LOSS OF
- *  USE, DATA,	OR PROFITS; OR	BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN	 CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/fb.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/ctype.h>
-#include <linux/dma-mapping.h>
-
-#include <asm/mach-au1x00/au1000.h>
-#include "au1200fb.h"
-
-#ifdef CONFIG_PM
-#include <asm/mach-au1x00/au1xxx_pm.h>
-#endif
-
-#ifndef CONFIG_FB_AU1200_DEVS
-#define CONFIG_FB_AU1200_DEVS 4
-#endif
-
-#define DRIVER_NAME "au1200fb"
-#define DRIVER_DESC "LCD controller driver for AU1200 processors"
-
-#define DEBUG 1
-
-#define print_err(f, arg...) printk(KERN_ERR DRIVER_NAME ": " f "\n", ## arg)
-#define print_warn(f, arg...) printk(KERN_WARNING DRIVER_NAME ": " f "\n", ## arg)
-#define print_info(f, arg...) printk(KERN_INFO DRIVER_NAME ": " f "\n", ## arg)
-
-#if DEBUG
-#define print_dbg(f, arg...) printk(KERN_DEBUG __FILE__ ": " f "\n", ## arg)
-#else
-#define print_dbg(f, arg...) do {} while (0)
-#endif
-
-
-#define AU1200_LCD_FB_IOCTL 0x46FF
-
-#define AU1200_LCD_SET_SCREEN 1
-#define AU1200_LCD_GET_SCREEN 2
-#define AU1200_LCD_SET_WINDOW 3
-#define AU1200_LCD_GET_WINDOW 4
-#define AU1200_LCD_SET_PANEL  5
-#define AU1200_LCD_GET_PANEL  6
-
-#define SCREEN_SIZE		    (1<< 1)
-#define SCREEN_BACKCOLOR    (1<< 2)
-#define SCREEN_BRIGHTNESS   (1<< 3)
-#define SCREEN_COLORKEY     (1<< 4)
-#define SCREEN_MASK         (1<< 5)
-
-struct au1200_lcd_global_regs_t {
-	unsigned int flags;
-	unsigned int xsize;
-	unsigned int ysize;
-	unsigned int backcolor;
-	unsigned int brightness;
-	unsigned int colorkey;
-	unsigned int mask;
-	unsigned int panel_choice;
-	char panel_desc[80];
-
-};
-
-#define WIN_POSITION            (1<< 0)
-#define WIN_ALPHA_COLOR         (1<< 1)
-#define WIN_ALPHA_MODE          (1<< 2)
-#define WIN_PRIORITY            (1<< 3)
-#define WIN_CHANNEL             (1<< 4)
-#define WIN_BUFFER_FORMAT       (1<< 5)
-#define WIN_COLOR_ORDER         (1<< 6)
-#define WIN_PIXEL_ORDER         (1<< 7)
-#define WIN_SIZE                (1<< 8)
-#define WIN_COLORKEY_MODE       (1<< 9)
-#define WIN_DOUBLE_BUFFER_MODE  (1<< 10)
-#define WIN_RAM_ARRAY_MODE      (1<< 11)
-#define WIN_BUFFER_SCALE        (1<< 12)
-#define WIN_ENABLE	            (1<< 13)
-
-struct au1200_lcd_window_regs_t {
-	unsigned int flags;
-	unsigned int xpos;
-	unsigned int ypos;
-	unsigned int alpha_color;
-	unsigned int alpha_mode;
-	unsigned int priority;
-	unsigned int channel;
-	unsigned int buffer_format;
-	unsigned int color_order;
-	unsigned int pixel_order;
-	unsigned int xsize;
-	unsigned int ysize;
-	unsigned int colorkey_mode;
-	unsigned int double_buffer_mode;
-	unsigned int ram_array_mode;
-	unsigned int xscale;
-	unsigned int yscale;
-	unsigned int enable;
-};
-
-
-struct au1200_lcd_iodata_t {
-	unsigned int subcmd;
-	struct au1200_lcd_global_regs_t global;
-	struct au1200_lcd_window_regs_t window;
-};
-
-#if defined(__BIG_ENDIAN)
-#define LCD_CONTROL_DEFAULT_PO LCD_CONTROL_PO_11
-#else
-#define LCD_CONTROL_DEFAULT_PO LCD_CONTROL_PO_00
-#endif
-#define LCD_CONTROL_DEFAULT_SBPPF LCD_CONTROL_SBPPF_565
-
-/* Private, per-framebuffer management information (independent of the panel itself) */
-struct au1200fb_device {
-	struct fb_info fb_info;			/* FB driver info record */
-
-	int					plane;
-	unsigned char* 		fb_mem;		/* FrameBuffer memory map */
-	unsigned int		fb_len;
-	dma_addr_t    		fb_phys;
-};
-
-static struct au1200fb_device _au1200fb_devices[CONFIG_FB_AU1200_DEVS];
-/********************************************************************/
-
-/* LCD controller restrictions */
-#define AU1200_LCD_MAX_XRES	1280
-#define AU1200_LCD_MAX_YRES	1024
-#define AU1200_LCD_MAX_BPP	32
-#define AU1200_LCD_MAX_CLK	96000000 /* fixme: this needs to go away ? */
-#define AU1200_LCD_NBR_PALETTE_ENTRIES 256
-
-/* Default number of visible screen buffer to allocate */
-#define AU1200FB_NBR_VIDEO_BUFFERS 1
-
-/********************************************************************/
-
-static struct au1200_lcd *lcd = (struct au1200_lcd *) AU1200_LCD_ADDR;
-static int window_index = 2; /* default is zero */
-static int panel_index = 2; /* default is zero */
-static struct window_settings *win;
-static struct panel_settings *panel;
-static int noblanking = 1;
-static int nohwcursor = 0;
-
-struct window_settings {
-	unsigned char name[64];
-	uint32 mode_backcolor;
-	uint32 mode_colorkey;
-	uint32 mode_colorkeymsk;
-	struct {
-		int xres;
-		int yres;
-		int xpos;
-		int ypos;
-		uint32 mode_winctrl1; /* winctrl1[FRM,CCO,PO,PIPE] */
-		uint32 mode_winenable;
-	} w[4];
-};
-
-#if defined(__BIG_ENDIAN)
-#define LCD_WINCTRL1_PO_16BPP LCD_WINCTRL1_PO_00
-#else
-#define LCD_WINCTRL1_PO_16BPP LCD_WINCTRL1_PO_01
-#endif
-
-extern int board_au1200fb_panel_init (void);
-extern int board_au1200fb_panel_shutdown (void);
-
-#ifdef CONFIG_PM
-int au1200fb_pm_callback(au1xxx_power_dev_t *dev,
-		au1xxx_request_t request, void *data);
-au1xxx_power_dev_t *LCD_pm_dev;
-#endif
-
-/*
- * Default window configurations
- */
-static struct window_settings windows[] = {
-	{ /* Index 0 */
-		"0-FS gfx, 1-video, 2-ovly gfx, 3-ovly gfx",
-		/* mode_backcolor	*/ 0x006600ff,
-		/* mode_colorkey,msk*/ 0, 0,
-		{
-			{
-			/* xres, yres, xpos, ypos */ 0, 0, 0, 0,
-			/* mode_winctrl1 */ LCD_WINCTRL1_FRM_16BPP565 |
-				LCD_WINCTRL1_PO_16BPP,
-			/* mode_winenable*/ LCD_WINENABLE_WEN0,
-			},
-			{
-			/* xres, yres, xpos, ypos */ 100, 100, 100, 100,
-			/* mode_winctrl1 */ LCD_WINCTRL1_FRM_16BPP565 |
-				LCD_WINCTRL1_PO_16BPP |
-				LCD_WINCTRL1_PIPE,
-			/* mode_winenable*/ LCD_WINENABLE_WEN1,
-			},
-			{
-			/* xres, yres, xpos, ypos */ 0, 0, 0, 0,
-			/* mode_winctrl1 */ LCD_WINCTRL1_FRM_16BPP565 |
-				LCD_WINCTRL1_PO_16BPP,
-			/* mode_winenable*/ 0,
-			},
-			{
-			/* xres, yres, xpos, ypos */ 0, 0, 0, 0,
-			/* mode_winctrl1 */ LCD_WINCTRL1_FRM_16BPP565 |
-				LCD_WINCTRL1_PO_16BPP |
-				LCD_WINCTRL1_PIPE,
-			/* mode_winenable*/ 0,
-			},
-		},
-	},
-
-	{ /* Index 1 */
-		"0-FS gfx, 1-video, 2-ovly gfx, 3-ovly gfx",
-		/* mode_backcolor	*/ 0x006600ff,
-		/* mode_colorkey,msk*/ 0, 0,
-		{
-			{
-			/* xres, yres, xpos, ypos */ 320, 240, 5, 5,
-			/* mode_winctrl1 */ LCD_WINCTRL1_FRM_24BPP |
-				LCD_WINCTRL1_PO_00,
-			/* mode_winenable*/ LCD_WINENABLE_WEN0,
-			},
-			{
-			/* xres, yres, xpos, ypos */ 0, 0, 0, 0,
-			/* mode_winctrl1 */ LCD_WINCTRL1_FRM_16BPP565
-				| LCD_WINCTRL1_PO_16BPP,
-			/* mode_winenable*/ 0,
-			},
-			{
-			/* xres, yres, xpos, ypos */ 100, 100, 0, 0,
-			/* mode_winctrl1 */ LCD_WINCTRL1_FRM_16BPP565 |
-				LCD_WINCTRL1_PO_16BPP |
-				LCD_WINCTRL1_PIPE,
-			/* mode_winenable*/ 0/*LCD_WINENABLE_WEN2*/,
-			},
-			{
-			/* xres, yres, xpos, ypos */ 200, 25, 0, 0,
-			/* mode_winctrl1 */ LCD_WINCTRL1_FRM_16BPP565 |
-				LCD_WINCTRL1_PO_16BPP |
-				LCD_WINCTRL1_PIPE,
-			/* mode_winenable*/ 0,
-			},
-		},
-	},
-	{ /* Index 2 */
-		"0-FS gfx, 1-video, 2-ovly gfx, 3-ovly gfx",
-		/* mode_backcolor	*/ 0x006600ff,
-		/* mode_colorkey,msk*/ 0, 0,
-		{
-			{
-			/* xres, yres, xpos, ypos */ 0, 0, 0, 0,
-			/* mode_winctrl1 */ LCD_WINCTRL1_FRM_16BPP565 |
-				LCD_WINCTRL1_PO_16BPP,
-			/* mode_winenable*/ LCD_WINENABLE_WEN0,
-			},
-			{
-			/* xres, yres, xpos, ypos */ 0, 0, 0, 0,
-			/* mode_winctrl1 */ LCD_WINCTRL1_FRM_16BPP565 |
-				LCD_WINCTRL1_PO_16BPP,
-			/* mode_winenable*/ 0,
-			},
-			{
-			/* xres, yres, xpos, ypos */ 0, 0, 0, 0,
-			/* mode_winctrl1 */ LCD_WINCTRL1_FRM_32BPP |
-				LCD_WINCTRL1_PO_00|LCD_WINCTRL1_PIPE,
-			/* mode_winenable*/ 0/*LCD_WINENABLE_WEN2*/,
-			},
-			{
-			/* xres, yres, xpos, ypos */ 0, 0, 0, 0,
-			/* mode_winctrl1 */ LCD_WINCTRL1_FRM_16BPP565 |
-				LCD_WINCTRL1_PO_16BPP |
-				LCD_WINCTRL1_PIPE,
-			/* mode_winenable*/ 0,
-			},
-		},
-	},
-	/* Need VGA 640 @ 24bpp, @ 32bpp */
-	/* Need VGA 800 @ 24bpp, @ 32bpp */
-	/* Need VGA 1024 @ 24bpp, @ 32bpp */
-};
-
-/*
- * Controller configurations for various panels.
- */
-
-struct panel_settings
-{
-	const char name[25];		/* Full name <vendor>_<model> */
-
-	struct 	fb_monspecs monspecs; 	/* FB monitor specs */
-
-	/* panel timings */
-	uint32 mode_screen;
-	uint32 mode_horztiming;
-	uint32 mode_verttiming;
-	uint32 mode_clkcontrol;
-	uint32 mode_pwmdiv;
-	uint32 mode_pwmhi;
-	uint32 mode_outmask;
-	uint32 mode_fifoctrl;
-	uint32 mode_toyclksrc;
-	uint32 mode_backlight;
-	uint32 mode_auxpll;
-	int (*device_init)(void);
-	int (*device_shutdown)(void);
-#define Xres min_xres
-#define Yres min_yres
-	u32	min_xres;		/* Minimum horizontal resolution */
-	u32	max_xres;		/* Maximum horizontal resolution */
-	u32 	min_yres;		/* Minimum vertical resolution */
-	u32 	max_yres;		/* Maximum vertical resolution */
-};
-
-/********************************************************************/
-/* fixme: Maybe a modedb for the CRT ? otherwise panels should be as-is */
-
-/* List of panels known to work with the AU1200 LCD controller.
- * To add a new panel, enter the same specifications as the
- * Generic_TFT one, and MAKE SURE that it doesn't conflicts
- * with the controller restrictions. Restrictions are:
- *
- * STN color panels: max_bpp <= 12
- * STN mono panels: max_bpp <= 4
- * TFT panels: max_bpp <= 16
- * max_xres <= 800
- * max_yres <= 600
- */
-static struct panel_settings known_lcd_panels[] =
-{
-	[0] = { /* QVGA 320x240 H:33.3kHz V:110Hz */
-		.name = "QVGA_320x240",
-		.monspecs = {
-			.modedb = NULL,
-			.modedb_len = 0,
-			.hfmin = 30000,
-			.hfmax = 70000,
-			.vfmin = 60,
-			.vfmax = 60,
-			.dclkmin = 6000000,
-			.dclkmax = 28000000,
-			.input = FB_DISP_RGB,
-		},
-		.mode_screen		= LCD_SCREEN_SX_N(320) |
-			LCD_SCREEN_SY_N(240),
-		.mode_horztiming	= 0x00c4623b,
-		.mode_verttiming	= 0x00502814,
-		.mode_clkcontrol	= 0x00020002, /* /4=24Mhz */
-		.mode_pwmdiv		= 0x00000000,
-		.mode_pwmhi		= 0x00000000,
-		.mode_outmask	= 0x00FFFFFF,
-		.mode_fifoctrl	= 0x2f2f2f2f,
-		.mode_toyclksrc	= 0x00000004, /* AUXPLL directly */
-		.mode_backlight	= 0x00000000,
-		.mode_auxpll		= 8, /* 96MHz AUXPLL */
-		.device_init		= NULL,
-		.device_shutdown	= NULL,
-		320, 320,
-		240, 240,
-	},
-
-	[1] = { /* VGA 640x480 H:30.3kHz V:58Hz */
-		.name = "VGA_640x480",
-		.monspecs = {
-			.modedb = NULL,
-			.modedb_len = 0,
-			.hfmin = 30000,
-			.hfmax = 70000,
-			.vfmin = 60,
-			.vfmax = 60,
-			.dclkmin = 6000000,
-			.dclkmax = 28000000,
-			.input = FB_DISP_RGB,
-		},
-		.mode_screen		= 0x13f9df80,
-		.mode_horztiming	= 0x003c5859,
-		.mode_verttiming	= 0x00741201,
-		.mode_clkcontrol	= 0x00020001, /* /4=24Mhz */
-		.mode_pwmdiv		= 0x00000000,
-		.mode_pwmhi		= 0x00000000,
-		.mode_outmask	= 0x00FFFFFF,
-		.mode_fifoctrl	= 0x2f2f2f2f,
-		.mode_toyclksrc	= 0x00000004, /* AUXPLL directly */
-		.mode_backlight	= 0x00000000,
-		.mode_auxpll		= 8, /* 96MHz AUXPLL */
-		.device_init		= NULL,
-		.device_shutdown	= NULL,
-		640, 480,
-		640, 480,
-	},
-
-	[2] = { /* SVGA 800x600 H:46.1kHz V:69Hz */
-		.name = "SVGA_800x600",
-		.monspecs = {
-			.modedb = NULL,
-			.modedb_len = 0,
-			.hfmin = 30000,
-			.hfmax = 70000,
-			.vfmin = 60,
-			.vfmax = 60,
-			.dclkmin = 6000000,
-			.dclkmax = 28000000,
-			.input = FB_DISP_RGB,
-		},
-		.mode_screen		= 0x18fa5780,
-		.mode_horztiming	= 0x00dc7e77,
-		.mode_verttiming	= 0x00584805,
-		.mode_clkcontrol	= 0x00020000, /* /2=48Mhz */
-		.mode_pwmdiv		= 0x00000000,
-		.mode_pwmhi		= 0x00000000,
-		.mode_outmask	= 0x00FFFFFF,
-		.mode_fifoctrl	= 0x2f2f2f2f,
-		.mode_toyclksrc	= 0x00000004, /* AUXPLL directly */
-		.mode_backlight	= 0x00000000,
-		.mode_auxpll		= 8, /* 96MHz AUXPLL */
-		.device_init		= NULL,
-		.device_shutdown	= NULL,
-		800, 800,
-		600, 600,
-	},
-
-	[3] = { /* XVGA 1024x768 H:56.2kHz V:70Hz */
-		.name = "XVGA_1024x768",
-		.monspecs = {
-			.modedb = NULL,
-			.modedb_len = 0,
-			.hfmin = 30000,
-			.hfmax = 70000,
-			.vfmin = 60,
-			.vfmax = 60,
-			.dclkmin = 6000000,
-			.dclkmax = 28000000,
-			.input = FB_DISP_RGB,
-		},
-		.mode_screen		= 0x1ffaff80,
-		.mode_horztiming	= 0x007d0e57,
-		.mode_verttiming	= 0x00740a01,
-		.mode_clkcontrol	= 0x000A0000, /* /1 */
-		.mode_pwmdiv		= 0x00000000,
-		.mode_pwmhi		= 0x00000000,
-		.mode_outmask	= 0x00FFFFFF,
-		.mode_fifoctrl	= 0x2f2f2f2f,
-		.mode_toyclksrc	= 0x00000004, /* AUXPLL directly */
-		.mode_backlight	= 0x00000000,
-		.mode_auxpll		= 6, /* 72MHz AUXPLL */
-		.device_init		= NULL,
-		.device_shutdown	= NULL,
-		1024, 1024,
-		768, 768,
-	},
-
-	[4] = { /* XVGA XVGA 1280x1024 H:68.5kHz V:65Hz */
-		.name = "XVGA_1280x1024",
-		.monspecs = {
-			.modedb = NULL,
-			.modedb_len = 0,
-			.hfmin = 30000,
-			.hfmax = 70000,
-			.vfmin = 60,
-			.vfmax = 60,
-			.dclkmin = 6000000,
-			.dclkmax = 28000000,
-			.input = FB_DISP_RGB,
-		},
-		.mode_screen		= 0x27fbff80,
-		.mode_horztiming	= 0x00cdb2c7,
-		.mode_verttiming	= 0x00600002,
-		.mode_clkcontrol	= 0x000A0000, /* /1 */
-		.mode_pwmdiv		= 0x00000000,
-		.mode_pwmhi		= 0x00000000,
-		.mode_outmask	= 0x00FFFFFF,
-		.mode_fifoctrl	= 0x2f2f2f2f,
-		.mode_toyclksrc	= 0x00000004, /* AUXPLL directly */
-		.mode_backlight	= 0x00000000,
-		.mode_auxpll		= 10, /* 120MHz AUXPLL */
-		.device_init		= NULL,
-		.device_shutdown	= NULL,
-		1280, 1280,
-		1024, 1024,
-	},
-
-	[5] = { /* Samsung 1024x768 TFT */
-		.name = "Samsung_1024x768_TFT",
-		.monspecs = {
-			.modedb = NULL,
-			.modedb_len = 0,
-			.hfmin = 30000,
-			.hfmax = 70000,
-			.vfmin = 60,
-			.vfmax = 60,
-			.dclkmin = 6000000,
-			.dclkmax = 28000000,
-			.input = FB_DISP_RGB,
-		},
-		.mode_screen		= 0x1ffaff80,
-		.mode_horztiming	= 0x018cc677,
-		.mode_verttiming	= 0x00241217,
-		.mode_clkcontrol	= 0x00000000, /* SCB 0x1 /4=24Mhz */
-		.mode_pwmdiv		= 0x8000063f, /* SCB 0x0 */
-		.mode_pwmhi		= 0x03400000, /* SCB 0x0 */
-		.mode_outmask	= 0x00FFFFFF,
-		.mode_fifoctrl	= 0x2f2f2f2f,
-		.mode_toyclksrc	= 0x00000004, /* AUXPLL directly */
-		.mode_backlight	= 0x00000000,
-		.mode_auxpll		= 8, /* 96MHz AUXPLL */
-		.device_init		= board_au1200fb_panel_init,
-		.device_shutdown	= board_au1200fb_panel_shutdown,
-		1024, 1024,
-		768, 768,
-	},
-
-	[6] = { /* Toshiba 640x480 TFT */
-		.name = "Toshiba_640x480_TFT",
-		.monspecs = {
-			.modedb = NULL,
-			.modedb_len = 0,
-			.hfmin = 30000,
-			.hfmax = 70000,
-			.vfmin = 60,
-			.vfmax = 60,
-			.dclkmin = 6000000,
-			.dclkmax = 28000000,
-			.input = FB_DISP_RGB,
-		},
-		.mode_screen		= LCD_SCREEN_SX_N(640) |
-			LCD_SCREEN_SY_N(480),
-		.mode_horztiming	= LCD_HORZTIMING_HPW_N(96) |
-			LCD_HORZTIMING_HND1_N(13) | LCD_HORZTIMING_HND2_N(51),
-		.mode_verttiming	= LCD_VERTTIMING_VPW_N(2) |
-			LCD_VERTTIMING_VND1_N(11) | LCD_VERTTIMING_VND2_N(32),
-		.mode_clkcontrol	= 0x00000000, /* /4=24Mhz */
-		.mode_pwmdiv		= 0x8000063f,
-		.mode_pwmhi		= 0x03400000,
-		.mode_outmask	= 0x00fcfcfc,
-		.mode_fifoctrl	= 0x2f2f2f2f,
-		.mode_toyclksrc	= 0x00000004, /* AUXPLL directly */
-		.mode_backlight	= 0x00000000,
-		.mode_auxpll		= 8, /* 96MHz AUXPLL */
-		.device_init		= board_au1200fb_panel_init,
-		.device_shutdown	= board_au1200fb_panel_shutdown,
-		640, 480,
-		640, 480,
-	},
-
-	[7] = { /* Sharp 320x240 TFT */
-		.name = "Sharp_320x240_TFT",
-		.monspecs = {
-			.modedb = NULL,
-			.modedb_len = 0,
-			.hfmin = 12500,
-			.hfmax = 20000,
-			.vfmin = 38,
-			.vfmax = 81,
-			.dclkmin = 4500000,
-			.dclkmax = 6800000,
-			.input = FB_DISP_RGB,
-		},
-		.mode_screen		= LCD_SCREEN_SX_N(320) |
-			LCD_SCREEN_SY_N(240),
-		.mode_horztiming	= LCD_HORZTIMING_HPW_N(60) |
-			LCD_HORZTIMING_HND1_N(13) | LCD_HORZTIMING_HND2_N(2),
-		.mode_verttiming	= LCD_VERTTIMING_VPW_N(2) |
-			LCD_VERTTIMING_VND1_N(2) | LCD_VERTTIMING_VND2_N(5),
-		.mode_clkcontrol	= LCD_CLKCONTROL_PCD_N(7), /*16=6Mhz*/
-		.mode_pwmdiv		= 0x8000063f,
-		.mode_pwmhi		= 0x03400000,
-		.mode_outmask	= 0x00fcfcfc,
-		.mode_fifoctrl	= 0x2f2f2f2f,
-		.mode_toyclksrc	= 0x00000004, /* AUXPLL directly */
-		.mode_backlight	= 0x00000000,
-		.mode_auxpll		= 8, /* 96MHz AUXPLL */
-		.device_init		= board_au1200fb_panel_init,
-		.device_shutdown	= board_au1200fb_panel_shutdown,
-		320, 320,
-		240, 240,
-	},
-
-	[8] = { /* Toppoly TD070WGCB2 7" 856x480 TFT */
-		.name = "Toppoly_TD070WGCB2",
-		.monspecs = {
-			.modedb = NULL,
-			.modedb_len = 0,
-			.hfmin = 30000,
-			.hfmax = 70000,
-			.vfmin = 60,
-			.vfmax = 60,
-			.dclkmin = 6000000,
-			.dclkmax = 28000000,
-			.input = FB_DISP_RGB,
-		},
-		.mode_screen		= LCD_SCREEN_SX_N(856) |
-			LCD_SCREEN_SY_N(480),
-		.mode_horztiming	= LCD_HORZTIMING_HND2_N(43) |
-			LCD_HORZTIMING_HND1_N(43) | LCD_HORZTIMING_HPW_N(114),
-		.mode_verttiming	= LCD_VERTTIMING_VND2_N(20) |
-			LCD_VERTTIMING_VND1_N(21) | LCD_VERTTIMING_VPW_N(4),
-		.mode_clkcontrol	= 0x00020001, /* /4=24Mhz */
-		.mode_pwmdiv		= 0x8000063f,
-		.mode_pwmhi		= 0x03400000,
-		.mode_outmask	= 0x00fcfcfc,
-		.mode_fifoctrl	= 0x2f2f2f2f,
-		.mode_toyclksrc	= 0x00000004, /* AUXPLL directly */
-		.mode_backlight	= 0x00000000,
-		.mode_auxpll		= 8, /* 96MHz AUXPLL */
-		.device_init		= board_au1200fb_panel_init,
-		.device_shutdown	= board_au1200fb_panel_shutdown,
-		856, 856,
-		480, 480,
-	},
-};
-
-#define NUM_PANELS (ARRAY_SIZE(known_lcd_panels))
-
-/********************************************************************/
-
-#ifdef CONFIG_PM
-static int set_brightness(unsigned int brightness)
-{
-	unsigned int hi1, divider;
-
-	/* limit brightness pwm duty to >= 30/1600 */
-	if (brightness < 30) {
-		brightness = 30;
-	}
-	divider = (lcd->pwmdiv & 0x3FFFF) + 1;
-	hi1 = (lcd->pwmhi >> 16) + 1;
-	hi1 = (((brightness & 0xFF) + 1) * divider >> 8);
-	lcd->pwmhi &= 0xFFFF;
-	lcd->pwmhi |= (hi1 << 16);
-
-	return brightness;
-}
-#endif /* CONFIG_PM */
-
-static int winbpp (unsigned int winctrl1)
-{
-	int bits = 0;
-
-	/* how many bits are needed for each pixel format */
-	switch (winctrl1 & LCD_WINCTRL1_FRM) {
-	case LCD_WINCTRL1_FRM_1BPP:
-		bits = 1;
-		break;
-	case LCD_WINCTRL1_FRM_2BPP:
-		bits = 2;
-		break;
-	case LCD_WINCTRL1_FRM_4BPP:
-		bits = 4;
-		break;
-	case LCD_WINCTRL1_FRM_8BPP:
-		bits = 8;
-		break;
-	case LCD_WINCTRL1_FRM_12BPP:
-	case LCD_WINCTRL1_FRM_16BPP655:
-	case LCD_WINCTRL1_FRM_16BPP565:
-	case LCD_WINCTRL1_FRM_16BPP556:
-	case LCD_WINCTRL1_FRM_16BPPI1555:
-	case LCD_WINCTRL1_FRM_16BPPI5551:
-	case LCD_WINCTRL1_FRM_16BPPA1555:
-	case LCD_WINCTRL1_FRM_16BPPA5551:
-		bits = 16;
-		break;
-	case LCD_WINCTRL1_FRM_24BPP:
-	case LCD_WINCTRL1_FRM_32BPP:
-		bits = 32;
-		break;
-	}
-
-	return bits;
-}
-
-static int fbinfo2index (struct fb_info *fb_info)
-{
-	int i;
-
-	for (i = 0; i < CONFIG_FB_AU1200_DEVS; ++i) {
-		if (fb_info == (struct fb_info *)(&_au1200fb_devices[i].fb_info))
-			return i;
-	}
-	printk("au1200fb: ERROR: fbinfo2index failed!\n");
-	return -1;
-}
-
-static int au1200_setlocation (struct au1200fb_device *fbdev, int plane,
-	int xpos, int ypos)
-{
-	uint32 winctrl0, winctrl1, winenable, fb_offset = 0;
-	int xsz, ysz;
-
-	/* FIX!!! NOT CHECKING FOR COMPLETE OFFSCREEN YET */
-
-	winctrl0 = lcd->window[plane].winctrl0;
-	winctrl1 = lcd->window[plane].winctrl1;
-	winctrl0 &= (LCD_WINCTRL0_A | LCD_WINCTRL0_AEN);
-	winctrl1 &= ~(LCD_WINCTRL1_SZX | LCD_WINCTRL1_SZY);
-
-	/* Check for off-screen adjustments */
-	xsz = win->w[plane].xres;
-	ysz = win->w[plane].yres;
-	if ((xpos + win->w[plane].xres) > panel->Xres) {
-		/* Off-screen to the right */
-		xsz = panel->Xres - xpos; /* off by 1 ??? */
-		/*printk("off screen right\n");*/
-	}
-
-	if ((ypos + win->w[plane].yres) > panel->Yres) {
-		/* Off-screen to the bottom */
-		ysz = panel->Yres - ypos; /* off by 1 ??? */
-		/*printk("off screen bottom\n");*/
-	}
-
-	if (xpos < 0) {
-		/* Off-screen to the left */
-		xsz = win->w[plane].xres + xpos;
-		fb_offset += (((0 - xpos) * winbpp(lcd->window[plane].winctrl1))/8);
-		xpos = 0;
-		/*printk("off screen left\n");*/
-	}
-
-	if (ypos < 0) {
-		/* Off-screen to the top */
-		ysz = win->w[plane].yres + ypos;
-		/* fixme: fb_offset += ((0-ypos)*fb_pars[plane].line_length); */
-		ypos = 0;
-		/*printk("off screen top\n");*/
-	}
-
-	/* record settings */
-	win->w[plane].xpos = xpos;
-	win->w[plane].ypos = ypos;
-
-	xsz -= 1;
-	ysz -= 1;
-	winctrl0 |= (xpos << 21);
-	winctrl0 |= (ypos << 10);
-	winctrl1 |= (xsz << 11);
-	winctrl1 |= (ysz << 0);
-
-	/* Disable the window while making changes, then restore WINEN */
-	winenable = lcd->winenable & (1 << plane);
-	au_sync();
-	lcd->winenable &= ~(1 << plane);
-	lcd->window[plane].winctrl0 = winctrl0;
-	lcd->window[plane].winctrl1 = winctrl1;
-	lcd->window[plane].winbuf0 =
-	lcd->window[plane].winbuf1 = fbdev->fb_phys;
-	lcd->window[plane].winbufctrl = 0; /* select winbuf0 */
-	lcd->winenable |= winenable;
-	au_sync();
-
-	return 0;
-}
-
-static void au1200_setpanel (struct panel_settings *newpanel)
-{
-	/*
-	 * Perform global setup/init of LCD controller
-	 */
-	uint32 winenable;
-
-	/* Make sure all windows disabled */
-	winenable = lcd->winenable;
-	lcd->winenable = 0;
-	au_sync();
-	/*
-	 * Ensure everything is disabled before reconfiguring
-	 */
-	if (lcd->screen & LCD_SCREEN_SEN) {
-		/* Wait for vertical sync period */
-		lcd->intstatus = LCD_INT_SS;
-		while ((lcd->intstatus & LCD_INT_SS) == 0) {
-			au_sync();
-		}
-
-		lcd->screen &= ~LCD_SCREEN_SEN;	/*disable the controller*/
-
-		do {
-			lcd->intstatus = lcd->intstatus; /*clear interrupts*/
-			au_sync();
-		/*wait for controller to shut down*/
-		} while ((lcd->intstatus & LCD_INT_SD) == 0);
-
-		/* Call shutdown of current panel (if up) */
-		/* this must occur last, because if an external clock is driving
-		    the controller, the clock cannot be turned off before first
-			shutting down the controller.
-		 */
-		if (panel->device_shutdown != NULL)
-			panel->device_shutdown();
-	}
-
-	/* Newpanel == NULL indicates a shutdown operation only */
-	if (newpanel == NULL)
-		return;
-
-	panel = newpanel;
-
-	printk("Panel(%s), %dx%d\n", panel->name, panel->Xres, panel->Yres);
-
-	/*
-	 * Setup clocking if internal LCD clock source (assumes sys_auxpll valid)
-	 */
-	if (!(panel->mode_clkcontrol & LCD_CLKCONTROL_EXT))
-	{
-		uint32 sys_clksrc;
-		au_writel(panel->mode_auxpll, SYS_AUXPLL);
-		sys_clksrc = au_readl(SYS_CLKSRC) & ~0x0000001f;
-		sys_clksrc |= panel->mode_toyclksrc;
-		au_writel(sys_clksrc, SYS_CLKSRC);
-	}
-
-	/*
-	 * Configure panel timings
-	 */
-	lcd->screen = panel->mode_screen;
-	lcd->horztiming = panel->mode_horztiming;
-	lcd->verttiming = panel->mode_verttiming;
-	lcd->clkcontrol = panel->mode_clkcontrol;
-	lcd->pwmdiv = panel->mode_pwmdiv;
-	lcd->pwmhi = panel->mode_pwmhi;
-	lcd->outmask = panel->mode_outmask;
-	lcd->fifoctrl = panel->mode_fifoctrl;
-	au_sync();
-
-	/* fixme: Check window settings to make sure still valid
-	 * for new geometry */
-#if 0
-	au1200_setlocation(fbdev, 0, win->w[0].xpos, win->w[0].ypos);
-	au1200_setlocation(fbdev, 1, win->w[1].xpos, win->w[1].ypos);
-	au1200_setlocation(fbdev, 2, win->w[2].xpos, win->w[2].ypos);
-	au1200_setlocation(fbdev, 3, win->w[3].xpos, win->w[3].ypos);
-#endif
-	lcd->winenable = winenable;
-
-	/*
-	 * Re-enable screen now that it is configured
-	 */
-	lcd->screen |= LCD_SCREEN_SEN;
-	au_sync();
-
-	/* Call init of panel */
-	if (panel->device_init != NULL) panel->device_init();
-
-	/* FIX!!!! not appropriate on panel change!!! Global setup/init */
-	lcd->intenable = 0;
-	lcd->intstatus = ~0;
-	lcd->backcolor = win->mode_backcolor;
-
-	/* Setup Color Key - FIX!!! */
-	lcd->colorkey = win->mode_colorkey;
-	lcd->colorkeymsk = win->mode_colorkeymsk;
-
-	/* Setup HWCursor - FIX!!! Need to support this eventually */
-	lcd->hwc.cursorctrl = 0;
-	lcd->hwc.cursorpos = 0;
-	lcd->hwc.cursorcolor0 = 0;
-	lcd->hwc.cursorcolor1 = 0;
-	lcd->hwc.cursorcolor2 = 0;
-	lcd->hwc.cursorcolor3 = 0;
-
-
-#if 0
-#define D(X) printk("%25s: %08X\n", #X, X)
-	D(lcd->screen);
-	D(lcd->horztiming);
-	D(lcd->verttiming);
-	D(lcd->clkcontrol);
-	D(lcd->pwmdiv);
-	D(lcd->pwmhi);
-	D(lcd->outmask);
-	D(lcd->fifoctrl);
-	D(lcd->window[0].winctrl0);
-	D(lcd->window[0].winctrl1);
-	D(lcd->window[0].winctrl2);
-	D(lcd->window[0].winbuf0);
-	D(lcd->window[0].winbuf1);
-	D(lcd->window[0].winbufctrl);
-	D(lcd->window[1].winctrl0);
-	D(lcd->window[1].winctrl1);
-	D(lcd->window[1].winctrl2);
-	D(lcd->window[1].winbuf0);
-	D(lcd->window[1].winbuf1);
-	D(lcd->window[1].winbufctrl);
-	D(lcd->window[2].winctrl0);
-	D(lcd->window[2].winctrl1);
-	D(lcd->window[2].winctrl2);
-	D(lcd->window[2].winbuf0);
-	D(lcd->window[2].winbuf1);
-	D(lcd->window[2].winbufctrl);
-	D(lcd->window[3].winctrl0);
-	D(lcd->window[3].winctrl1);
-	D(lcd->window[3].winctrl2);
-	D(lcd->window[3].winbuf0);
-	D(lcd->window[3].winbuf1);
-	D(lcd->window[3].winbufctrl);
-	D(lcd->winenable);
-	D(lcd->intenable);
-	D(lcd->intstatus);
-	D(lcd->backcolor);
-	D(lcd->winenable);
-	D(lcd->colorkey);
-    D(lcd->colorkeymsk);
-	D(lcd->hwc.cursorctrl);
-	D(lcd->hwc.cursorpos);
-	D(lcd->hwc.cursorcolor0);
-	D(lcd->hwc.cursorcolor1);
-	D(lcd->hwc.cursorcolor2);
-	D(lcd->hwc.cursorcolor3);
-#endif
-}
-
-static void au1200_setmode(struct au1200fb_device *fbdev)
-{
-	int plane = fbdev->plane;
-	/* Window/plane setup */
-	lcd->window[plane].winctrl1 = ( 0
-		| LCD_WINCTRL1_PRI_N(plane)
-		| win->w[plane].mode_winctrl1 /* FRM,CCO,PO,PIPE */
-		) ;
-
-	au1200_setlocation(fbdev, plane, win->w[plane].xpos, win->w[plane].ypos);
-
-	lcd->window[plane].winctrl2 = ( 0
-		| LCD_WINCTRL2_CKMODE_00
-		| LCD_WINCTRL2_DBM
-		| LCD_WINCTRL2_BX_N( fbdev->fb_info.fix.line_length)
-		| LCD_WINCTRL2_SCX_1
-		| LCD_WINCTRL2_SCY_1
-		) ;
-	lcd->winenable |= win->w[plane].mode_winenable;
-	au_sync();
-}
-
-
-/* Inline helpers */
-
-/*#define panel_is_dual(panel)  ((panel->mode_screen & LCD_SCREEN_PT) == LCD_SCREEN_PT_010)*/
-/*#define panel_is_active(panel)((panel->mode_screen & LCD_SCREEN_PT) == LCD_SCREEN_PT_010)*/
-
-#define panel_is_color(panel) ((panel->mode_screen & LCD_SCREEN_PT) <= LCD_SCREEN_PT_CDSTN)
-
-/* Bitfields format supported by the controller. */
-static struct fb_bitfield rgb_bitfields[][4] = {
-  	/*     Red, 	   Green, 	 Blue, 	     Transp   */
-	[LCD_WINCTRL1_FRM_16BPP655 >> 25] =
-		{ { 10, 6, 0 }, { 5, 5, 0 }, { 0, 5, 0 }, { 0, 0, 0 } },
-
-	[LCD_WINCTRL1_FRM_16BPP565 >> 25] =
-		{ { 11, 5, 0 }, { 5, 6, 0 }, { 0, 5, 0 }, { 0, 0, 0 } },
-
-	[LCD_WINCTRL1_FRM_16BPP556 >> 25] =
-		{ { 11, 5, 0 }, { 6, 5, 0 }, { 0, 6, 0 }, { 0, 0, 0 } },
-
-	[LCD_WINCTRL1_FRM_16BPPI1555 >> 25] =
-		{ { 10, 5, 0 }, { 5, 5, 0 }, { 0, 5, 0 }, { 0, 0, 0 } },
-
-	[LCD_WINCTRL1_FRM_16BPPI5551 >> 25] =
-		{ { 11, 5, 0 }, { 6, 5, 0 }, { 1, 5, 0 }, { 0, 0, 0 } },
-
-	[LCD_WINCTRL1_FRM_16BPPA1555 >> 25] =
-		{ { 10, 5, 0 }, { 5, 5, 0 }, { 0, 5, 0 }, { 15, 1, 0 } },
-
-	[LCD_WINCTRL1_FRM_16BPPA5551 >> 25] =
-		{ { 11, 5, 0 }, { 6, 5, 0 }, { 1, 5, 0 }, { 0, 1, 0 } },
-
-	[LCD_WINCTRL1_FRM_24BPP >> 25] =
-		{ { 16, 8, 0 }, { 8, 8, 0 }, { 0, 8, 0 }, { 0, 0, 0 } },
-
-	[LCD_WINCTRL1_FRM_32BPP >> 25] =
-		{ { 16, 8, 0 }, { 8, 8, 0 }, { 0, 8, 0 }, { 24, 0, 0 } },
-};
-
-/*-------------------------------------------------------------------------*/
-
-/* Helpers */
-
-static void au1200fb_update_fbinfo(struct fb_info *fbi)
-{
-	/* FIX!!!! This also needs to take the window pixel format into account!!! */
-
-	/* Update var-dependent FB info */
-	if (panel_is_color(panel)) {
-		if (fbi->var.bits_per_pixel <= 8) {
-			/* palettized */
-			fbi->fix.visual = FB_VISUAL_PSEUDOCOLOR;
-			fbi->fix.line_length = fbi->var.xres_virtual /
-				(8/fbi->var.bits_per_pixel);
-		} else {
-			/* non-palettized */
-			fbi->fix.visual = FB_VISUAL_TRUECOLOR;
-			fbi->fix.line_length = fbi->var.xres_virtual * (fbi->var.bits_per_pixel / 8);
-		}
-	} else {
-		/* mono FIX!!! mono 8 and 4 bits */
-		fbi->fix.visual = FB_VISUAL_MONO10;
-		fbi->fix.line_length = fbi->var.xres_virtual / 8;
-	}
-
-	fbi->screen_size = fbi->fix.line_length * fbi->var.yres_virtual;
-	print_dbg("line length: %d\n", fbi->fix.line_length);
-	print_dbg("bits_per_pixel: %d\n", fbi->var.bits_per_pixel);
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* AU1200 framebuffer driver */
-
-/* fb_check_var
- * Validate var settings with hardware restrictions and modify it if necessary
- */
-static int au1200fb_fb_check_var(struct fb_var_screeninfo *var,
-	struct fb_info *fbi)
-{
-	struct au1200fb_device *fbdev = (struct au1200fb_device *)fbi;
-	u32 pixclock;
-	int screen_size, plane;
-
-	plane = fbdev->plane;
-
-	/* Make sure that the mode respect all LCD controller and
-	 * panel restrictions. */
-	var->xres = win->w[plane].xres;
-	var->yres = win->w[plane].yres;
-
-	/* No need for virtual resolution support */
-	var->xres_virtual = var->xres;
-	var->yres_virtual = var->yres;
-
-	var->bits_per_pixel = winbpp(win->w[plane].mode_winctrl1);
-
-	screen_size = var->xres_virtual * var->yres_virtual;
-	if (var->bits_per_pixel > 8) screen_size *= (var->bits_per_pixel / 8);
-	else screen_size /= (8/var->bits_per_pixel);
-
-	if (fbdev->fb_len < screen_size)
-		return -EINVAL; /* Virtual screen is to big, abort */
-
-	/* FIX!!!! what are the implicaitons of ignoring this for windows ??? */
-	/* The max LCD clock is fixed to 48MHz (value of AUX_CLK). The pixel
-	 * clock can only be obtain by dividing this value by an even integer.
-	 * Fallback to a slower pixel clock if necessary. */
-	pixclock = max((u32)(PICOS2KHZ(var->pixclock) * 1000), fbi->monspecs.dclkmin);
-	pixclock = min(pixclock, min(fbi->monspecs.dclkmax, (u32)AU1200_LCD_MAX_CLK/2));
-
-	if (AU1200_LCD_MAX_CLK % pixclock) {
-		int diff = AU1200_LCD_MAX_CLK % pixclock;
-		pixclock -= diff;
-	}
-
-	var->pixclock = KHZ2PICOS(pixclock/1000);
-#if 0
-	if (!panel_is_active(panel)) {
-		int pcd = AU1200_LCD_MAX_CLK / (pixclock * 2) - 1;
-
-		if (!panel_is_color(panel)
-			&& (panel->control_base & LCD_CONTROL_MPI) && (pcd < 3)) {
-			/* STN 8bit mono panel support is up to 6MHz pixclock */
-			var->pixclock = KHZ2PICOS(6000);
-		} else if (!pcd) {
-			/* Other STN panel support is up to 12MHz  */
-			var->pixclock = KHZ2PICOS(12000);
-		}
-	}
-#endif
-	/* Set bitfield accordingly */
-	switch (var->bits_per_pixel) {
-		case 16:
-		{
-			/* 16bpp True color.
-			 * These must be set to MATCH WINCTRL[FORM] */
-			int idx;
-			idx = (win->w[0].mode_winctrl1 & LCD_WINCTRL1_FRM) >> 25;
-			var->red    = rgb_bitfields[idx][0];
-			var->green  = rgb_bitfields[idx][1];
-			var->blue   = rgb_bitfields[idx][2];
-			var->transp = rgb_bitfields[idx][3];
-			break;
-		}
-
-		case 32:
-		{
-			/* 32bpp True color.
-			 * These must be set to MATCH WINCTRL[FORM] */
-			int idx;
-			idx = (win->w[0].mode_winctrl1 & LCD_WINCTRL1_FRM) >> 25;
-			var->red    = rgb_bitfields[idx][0];
-			var->green  = rgb_bitfields[idx][1];
-			var->blue   = rgb_bitfields[idx][2];
-			var->transp = rgb_bitfields[idx][3];
-			break;
-		}
-		default:
-			print_dbg("Unsupported depth %dbpp", var->bits_per_pixel);
-			return -EINVAL;
-	}
-
-	return 0;
-}
-
-/* fb_set_par
- * Set hardware with var settings. This will enable the controller with a
- * specific mode, normally validated with the fb_check_var method
- */
-static int au1200fb_fb_set_par(struct fb_info *fbi)
-{
-	struct au1200fb_device *fbdev = (struct au1200fb_device *)fbi;
-
-	au1200fb_update_fbinfo(fbi);
-	au1200_setmode(fbdev);
-
-	return 0;
-}
-
-/* fb_setcolreg
- * Set color in LCD palette.
- */
-static int au1200fb_fb_setcolreg(unsigned regno, unsigned red, unsigned green,
-	unsigned blue, unsigned transp, struct fb_info *fbi)
-{
-	volatile u32 *palette = lcd->palette;
-	u32 value;
-
-	if (regno > (AU1200_LCD_NBR_PALETTE_ENTRIES - 1))
-		return -EINVAL;
-
-	if (fbi->var.grayscale) {
-		/* Convert color to grayscale */
-		red = green = blue =
-			(19595 * red + 38470 * green + 7471 * blue) >> 16;
-	}
-
-	if (fbi->fix.visual == FB_VISUAL_TRUECOLOR) {
-		/* Place color in the pseudopalette */
-		if (regno > 16)
-			return -EINVAL;
-
-		palette = (u32*) fbi->pseudo_palette;
-
-		red   >>= (16 - fbi->var.red.length);
-		green >>= (16 - fbi->var.green.length);
-		blue  >>= (16 - fbi->var.blue.length);
-
-		value = (red   << fbi->var.red.offset) 	|
-			(green << fbi->var.green.offset)|
-			(blue  << fbi->var.blue.offset);
-		value &= 0xFFFF;
-
-	} else if (1 /*FIX!!! panel_is_active(fbdev->panel)*/) {
-		/* COLOR TFT PALLETTIZED (use RGB 565) */
-		value = (red & 0xF800)|((green >> 5) &
-				0x07E0)|((blue >> 11) & 0x001F);
-		value &= 0xFFFF;
-
-	} else if (0 /*panel_is_color(fbdev->panel)*/) {
-		/* COLOR STN MODE */
-		value = 0x1234;
-		value &= 0xFFF;
-	} else {
-		/* MONOCHROME MODE */
-		value = (green >> 12) & 0x000F;
-		value &= 0xF;
-	}
-
-	palette[regno] = value;
-
-	return 0;
-}
-
-/* fb_blank
- * Blank the screen. Depending on the mode, the screen will be
- * activated with the backlight color, or desactivated
- */
-static int au1200fb_fb_blank(int blank_mode, struct fb_info *fbi)
-{
-	/* Short-circuit screen blanking */
-	if (noblanking)
-		return 0;
-
-	switch (blank_mode) {
-
-	case FB_BLANK_UNBLANK:
-	case FB_BLANK_NORMAL:
-		/* printk("turn on panel\n"); */
-		au1200_setpanel(panel);
-		break;
-	case FB_BLANK_VSYNC_SUSPEND:
-	case FB_BLANK_HSYNC_SUSPEND:
-	case FB_BLANK_POWERDOWN:
-		/* printk("turn off panel\n"); */
-		au1200_setpanel(NULL);
-		break;
-	default:
-		break;
-
-	}
-
-	/* FB_BLANK_NORMAL is a soft blank */
-	return (blank_mode == FB_BLANK_NORMAL) ? -EINVAL : 0;
-}
-
-/* fb_mmap
- * Map video memory in user space. We don't use the generic fb_mmap
- * method mainly to allow the use of the TLB streaming flag (CCA=6)
- */
-static int au1200fb_fb_mmap(struct fb_info *info, struct vm_area_struct *vma)
-
-{
-	unsigned int len;
-	unsigned long start=0, off;
-	struct au1200fb_device *fbdev = (struct au1200fb_device *) info;
-
-#ifdef CONFIG_PM
-	au1xxx_pm_access(LCD_pm_dev);
-#endif
-
-	if (vma->vm_pgoff > (~0UL >> PAGE_SHIFT)) {
-		return -EINVAL;
-	}
-
-	start = fbdev->fb_phys & PAGE_MASK;
-	len = PAGE_ALIGN((start & ~PAGE_MASK) + fbdev->fb_len);
-
-	off = vma->vm_pgoff << PAGE_SHIFT;
-
-	if ((vma->vm_end - vma->vm_start + off) > len) {
-		return -EINVAL;
-	}
-
-	off += start;
-	vma->vm_pgoff = off >> PAGE_SHIFT;
-
-	vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
-	pgprot_val(vma->vm_page_prot) |= _CACHE_MASK; /* CCA=7 */
-
-	vma->vm_flags |= VM_IO;
-
-	return io_remap_pfn_range(vma, vma->vm_start, off >> PAGE_SHIFT,
-				  vma->vm_end - vma->vm_start,
-				  vma->vm_page_prot);
-
-	return 0;
-}
-
-static void set_global(u_int cmd, struct au1200_lcd_global_regs_t *pdata)
-{
-
-	unsigned int hi1, divider;
-
-	/* SCREEN_SIZE: user cannot reset size, must switch panel choice */
-
-	if (pdata->flags & SCREEN_BACKCOLOR)
-		lcd->backcolor = pdata->backcolor;
-
-	if (pdata->flags & SCREEN_BRIGHTNESS) {
-
-		// limit brightness pwm duty to >= 30/1600
-		if (pdata->brightness < 30) {
-			pdata->brightness = 30;
-		}
-		divider = (lcd->pwmdiv & 0x3FFFF) + 1;
-		hi1 = (lcd->pwmhi >> 16) + 1;
-		hi1 = (((pdata->brightness & 0xFF)+1) * divider >> 8);
-		lcd->pwmhi &= 0xFFFF;
-		lcd->pwmhi |= (hi1 << 16);
-	}
-
-	if (pdata->flags & SCREEN_COLORKEY)
-		lcd->colorkey = pdata->colorkey;
-
-	if (pdata->flags & SCREEN_MASK)
-		lcd->colorkeymsk = pdata->mask;
-	au_sync();
-}
-
-static void get_global(u_int cmd, struct au1200_lcd_global_regs_t *pdata)
-{
-	unsigned int hi1, divider;
-
-	pdata->xsize = ((lcd->screen & LCD_SCREEN_SX) >> 19) + 1;
-	pdata->ysize = ((lcd->screen & LCD_SCREEN_SY) >> 8) + 1;
-
-	pdata->backcolor = lcd->backcolor;
-	pdata->colorkey = lcd->colorkey;
-	pdata->mask = lcd->colorkeymsk;
-
-	// brightness
-	hi1 = (lcd->pwmhi >> 16) + 1;
-	divider = (lcd->pwmdiv & 0x3FFFF) + 1;
-	pdata->brightness = ((hi1 << 8) / divider) - 1;
-	au_sync();
-}
-
-static void set_window(unsigned int plane,
-	struct au1200_lcd_window_regs_t *pdata)
-{
-	unsigned int val, bpp;
-
-	/* Window control register 0 */
-	if (pdata->flags & WIN_POSITION) {
-		val = lcd->window[plane].winctrl0 & ~(LCD_WINCTRL0_OX |
-				LCD_WINCTRL0_OY);
-		val |= ((pdata->xpos << 21) & LCD_WINCTRL0_OX);
-		val |= ((pdata->ypos << 10) & LCD_WINCTRL0_OY);
-		lcd->window[plane].winctrl0 = val;
-	}
-	if (pdata->flags & WIN_ALPHA_COLOR) {
-		val = lcd->window[plane].winctrl0 & ~(LCD_WINCTRL0_A);
-		val |= ((pdata->alpha_color << 2) & LCD_WINCTRL0_A);
-		lcd->window[plane].winctrl0 = val;
-	}
-	if (pdata->flags & WIN_ALPHA_MODE) {
-		val = lcd->window[plane].winctrl0 & ~(LCD_WINCTRL0_AEN);
-		val |= ((pdata->alpha_mode << 1) & LCD_WINCTRL0_AEN);
-		lcd->window[plane].winctrl0 = val;
-	}
-
-	/* Window control register 1 */
-	if (pdata->flags & WIN_PRIORITY) {
-		val = lcd->window[plane].winctrl1 & ~(LCD_WINCTRL1_PRI);
-		val |= ((pdata->priority << 30) & LCD_WINCTRL1_PRI);
-		lcd->window[plane].winctrl1 = val;
-	}
-	if (pdata->flags & WIN_CHANNEL) {
-		val = lcd->window[plane].winctrl1 & ~(LCD_WINCTRL1_PIPE);
-		val |= ((pdata->channel << 29) & LCD_WINCTRL1_PIPE);
-		lcd->window[plane].winctrl1 = val;
-	}
-	if (pdata->flags & WIN_BUFFER_FORMAT) {
-		val = lcd->window[plane].winctrl1 & ~(LCD_WINCTRL1_FRM);
-		val |= ((pdata->buffer_format << 25) & LCD_WINCTRL1_FRM);
-		lcd->window[plane].winctrl1 = val;
-	}
-	if (pdata->flags & WIN_COLOR_ORDER) {
-		val = lcd->window[plane].winctrl1 & ~(LCD_WINCTRL1_CCO);
-		val |= ((pdata->color_order << 24) & LCD_WINCTRL1_CCO);
-		lcd->window[plane].winctrl1 = val;
-	}
-	if (pdata->flags & WIN_PIXEL_ORDER) {
-		val = lcd->window[plane].winctrl1 & ~(LCD_WINCTRL1_PO);
-		val |= ((pdata->pixel_order << 22) & LCD_WINCTRL1_PO);
-		lcd->window[plane].winctrl1 = val;
-	}
-	if (pdata->flags & WIN_SIZE) {
-		val = lcd->window[plane].winctrl1 & ~(LCD_WINCTRL1_SZX |
-				LCD_WINCTRL1_SZY);
-		val |= (((pdata->xsize << 11) - 1) & LCD_WINCTRL1_SZX);
-		val |= (((pdata->ysize) - 1) & LCD_WINCTRL1_SZY);
-		lcd->window[plane].winctrl1 = val;
-		/* program buffer line width */
-		bpp = winbpp(val) / 8;
-		val = lcd->window[plane].winctrl2 & ~(LCD_WINCTRL2_BX);
-		val |= (((pdata->xsize * bpp) << 8) & LCD_WINCTRL2_BX);
-		lcd->window[plane].winctrl2 = val;
-	}
-
-	/* Window control register 2 */
-	if (pdata->flags & WIN_COLORKEY_MODE) {
-		val = lcd->window[plane].winctrl2 & ~(LCD_WINCTRL2_CKMODE);
-		val |= ((pdata->colorkey_mode << 24) & LCD_WINCTRL2_CKMODE);
-		lcd->window[plane].winctrl2 = val;
-	}
-	if (pdata->flags & WIN_DOUBLE_BUFFER_MODE) {
-		val = lcd->window[plane].winctrl2 & ~(LCD_WINCTRL2_DBM);
-		val |= ((pdata->double_buffer_mode << 23) & LCD_WINCTRL2_DBM);
-		lcd->window[plane].winctrl2 = val;
-	}
-	if (pdata->flags & WIN_RAM_ARRAY_MODE) {
-		val = lcd->window[plane].winctrl2 & ~(LCD_WINCTRL2_RAM);
-		val |= ((pdata->ram_array_mode << 21) & LCD_WINCTRL2_RAM);
-		lcd->window[plane].winctrl2 = val;
-	}
-
-	/* Buffer line width programmed with WIN_SIZE */
-
-	if (pdata->flags & WIN_BUFFER_SCALE) {
-		val = lcd->window[plane].winctrl2 & ~(LCD_WINCTRL2_SCX |
-				LCD_WINCTRL2_SCY);
-		val |= ((pdata->xsize << 11) & LCD_WINCTRL2_SCX);
-		val |= ((pdata->ysize) & LCD_WINCTRL2_SCY);
-		lcd->window[plane].winctrl2 = val;
-	}
-
-	if (pdata->flags & WIN_ENABLE) {
-		val = lcd->winenable;
-		val &= ~(1<<plane);
-		val |= (pdata->enable & 1) << plane;
-		lcd->winenable = val;
-	}
-	au_sync();
-}
-
-static void get_window(unsigned int plane,
-	struct au1200_lcd_window_regs_t *pdata)
-{
-	/* Window control register 0 */
-	pdata->xpos = (lcd->window[plane].winctrl0 & LCD_WINCTRL0_OX) >> 21;
-	pdata->ypos = (lcd->window[plane].winctrl0 & LCD_WINCTRL0_OY) >> 10;
-	pdata->alpha_color = (lcd->window[plane].winctrl0 & LCD_WINCTRL0_A) >> 2;
-	pdata->alpha_mode = (lcd->window[plane].winctrl0 & LCD_WINCTRL0_AEN) >> 1;
-
-	/* Window control register 1 */
-	pdata->priority = (lcd->window[plane].winctrl1& LCD_WINCTRL1_PRI) >> 30;
-	pdata->channel = (lcd->window[plane].winctrl1 & LCD_WINCTRL1_PIPE) >> 29;
-	pdata->buffer_format = (lcd->window[plane].winctrl1 & LCD_WINCTRL1_FRM) >> 25;
-	pdata->color_order = (lcd->window[plane].winctrl1 & LCD_WINCTRL1_CCO) >> 24;
-	pdata->pixel_order = (lcd->window[plane].winctrl1 & LCD_WINCTRL1_PO) >> 22;
-	pdata->xsize = ((lcd->window[plane].winctrl1 & LCD_WINCTRL1_SZX) >> 11) + 1;
-	pdata->ysize = (lcd->window[plane].winctrl1 & LCD_WINCTRL1_SZY) + 1;
-
-	/* Window control register 2 */
-	pdata->colorkey_mode = (lcd->window[plane].winctrl2 & LCD_WINCTRL2_CKMODE) >> 24;
-	pdata->double_buffer_mode = (lcd->window[plane].winctrl2 & LCD_WINCTRL2_DBM) >> 23;
-	pdata->ram_array_mode = (lcd->window[plane].winctrl2 & LCD_WINCTRL2_RAM) >> 21;
-
-	pdata->enable = (lcd->winenable >> plane) & 1;
-	au_sync();
-}
-
-static int au1200fb_ioctl(struct fb_info *info, unsigned int cmd,
-                          unsigned long arg)
-{
-	int plane;
-	int val;
-
-#ifdef CONFIG_PM
-	au1xxx_pm_access(LCD_pm_dev);
-#endif
-
-	plane = fbinfo2index(info);
-	print_dbg("au1200fb: ioctl %d on plane %d\n", cmd, plane);
-
-	if (cmd == AU1200_LCD_FB_IOCTL) {
-		struct au1200_lcd_iodata_t iodata;
-
-		if (copy_from_user(&iodata, (void __user *) arg, sizeof(iodata)))
-			return -EFAULT;
-
-		print_dbg("FB IOCTL called\n");
-
-		switch (iodata.subcmd) {
-		case AU1200_LCD_SET_SCREEN:
-			print_dbg("AU1200_LCD_SET_SCREEN\n");
-			set_global(cmd, &iodata.global);
-			break;
-
-		case AU1200_LCD_GET_SCREEN:
-			print_dbg("AU1200_LCD_GET_SCREEN\n");
-			get_global(cmd, &iodata.global);
-			break;
-
-		case AU1200_LCD_SET_WINDOW:
-			print_dbg("AU1200_LCD_SET_WINDOW\n");
-			set_window(plane, &iodata.window);
-			break;
-
-		case AU1200_LCD_GET_WINDOW:
-			print_dbg("AU1200_LCD_GET_WINDOW\n");
-			get_window(plane, &iodata.window);
-			break;
-
-		case AU1200_LCD_SET_PANEL:
-			print_dbg("AU1200_LCD_SET_PANEL\n");
-			if ((iodata.global.panel_choice >= 0) &&
-					(iodata.global.panel_choice <
-					 NUM_PANELS))
-			{
-				struct panel_settings *newpanel;
-				panel_index = iodata.global.panel_choice;
-				newpanel = &known_lcd_panels[panel_index];
-				au1200_setpanel(newpanel);
-			}
-			break;
-
-		case AU1200_LCD_GET_PANEL:
-			print_dbg("AU1200_LCD_GET_PANEL\n");
-			iodata.global.panel_choice = panel_index;
-			break;
-
-		default:
-			return -EINVAL;
-		}
-
-		val = copy_to_user((void __user *) arg, &iodata, sizeof(iodata));
-		if (val) {
-			print_dbg("error: could not copy %d bytes\n", val);
-			return -EFAULT;
-		}
-	}
-
-	return 0;
-}
-
-
-static struct fb_ops au1200fb_fb_ops = {
-	.owner		= THIS_MODULE,
-	.fb_check_var	= au1200fb_fb_check_var,
-	.fb_set_par	= au1200fb_fb_set_par,
-	.fb_setcolreg	= au1200fb_fb_setcolreg,
-	.fb_blank	= au1200fb_fb_blank,
-	.fb_fillrect	= cfb_fillrect,
-	.fb_copyarea	= cfb_copyarea,
-	.fb_imageblit	= cfb_imageblit,
-	.fb_sync	= NULL,
-	.fb_ioctl	= au1200fb_ioctl,
-	.fb_mmap	= au1200fb_fb_mmap,
-};
-
-/*-------------------------------------------------------------------------*/
-
-static irqreturn_t au1200fb_handle_irq(int irq, void* dev_id, struct pt_regs *regs)
-{
-	/* Nothing to do for now, just clear any pending interrupt */
-	lcd->intstatus = lcd->intstatus;
-	au_sync();
-
-	return IRQ_HANDLED;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* AU1200 LCD device probe helpers */
-
-static int au1200fb_init_fbinfo(struct au1200fb_device *fbdev)
-{
-	struct fb_info *fbi = &fbdev->fb_info;
-	int bpp;
-
-	memset(fbi, 0, sizeof(struct fb_info));
-	fbi->fbops = &au1200fb_fb_ops;
-
-	bpp = winbpp(win->w[fbdev->plane].mode_winctrl1);
-
-	/* Copy monitor specs from panel data */
-	/* fixme: we're setting up LCD controller windows, so these dont give a
-	damn as to what the monitor specs are (the panel itself does, but that
-	isnt done here...so maybe need a generic catchall monitor setting??? */
-	memcpy(&fbi->monspecs, &panel->monspecs, sizeof(struct fb_monspecs));
-
-	/* We first try the user mode passed in argument. If that failed,
-	 * or if no one has been specified, we default to the first mode of the
-	 * panel list. Note that after this call, var data will be set */
-	if (!fb_find_mode(&fbi->var,
-			  fbi,
-			  NULL, /* drv_info.opt_mode, */
-			  fbi->monspecs.modedb,
-			  fbi->monspecs.modedb_len,
-			  fbi->monspecs.modedb,
-			  bpp)) {
-
-		print_err("Cannot find valid mode for panel %s", panel->name);
-		return -EFAULT;
-	}
-
-	fbi->pseudo_palette = kmalloc(sizeof(u32) * 16, GFP_KERNEL);
-	if (!fbi->pseudo_palette) {
-		return -ENOMEM;
-	}
-	memset(fbi->pseudo_palette, 0, sizeof(u32) * 16);
-
-	if (fb_alloc_cmap(&fbi->cmap, AU1200_LCD_NBR_PALETTE_ENTRIES, 0) < 0) {
-		print_err("Fail to allocate colormap (%d entries)",
-			   AU1200_LCD_NBR_PALETTE_ENTRIES);
-		kfree(fbi->pseudo_palette);
-		return -EFAULT;
-	}
-
-	strncpy(fbi->fix.id, "AU1200", sizeof(fbi->fix.id));
-	fbi->fix.smem_start = fbdev->fb_phys;
-	fbi->fix.smem_len = fbdev->fb_len;
-	fbi->fix.type = FB_TYPE_PACKED_PIXELS;
-	fbi->fix.xpanstep = 0;
-	fbi->fix.ypanstep = 0;
-	fbi->fix.mmio_start = 0;
-	fbi->fix.mmio_len = 0;
-	fbi->fix.accel = FB_ACCEL_NONE;
-
-	fbi->screen_base = (char __iomem *) fbdev->fb_mem;
-
-	au1200fb_update_fbinfo(fbi);
-
-	return 0;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* AU1200 LCD controller device driver */
-
-static int au1200fb_drv_probe(struct device *dev)
-{
-	struct au1200fb_device *fbdev;
-	unsigned long page;
-	int bpp, plane, ret;
-
-	if (!dev)
-		return -EINVAL;
-
-	for (plane = 0; plane < CONFIG_FB_AU1200_DEVS; ++plane) {
-		bpp = winbpp(win->w[plane].mode_winctrl1);
-		if (win->w[plane].xres == 0)
-			win->w[plane].xres = panel->Xres;
-		if (win->w[plane].yres == 0)
-			win->w[plane].yres = panel->Yres;
-
-		fbdev = &_au1200fb_devices[plane];
-		memset(fbdev, 0, sizeof(struct au1200fb_device));
-		fbdev->plane = plane;
-
-		/* Allocate the framebuffer to the maximum screen size */
-		fbdev->fb_len = (win->w[plane].xres * win->w[plane].yres * bpp) / 8;
-
-		fbdev->fb_mem = dma_alloc_noncoherent(dev,
-				PAGE_ALIGN(fbdev->fb_len),
-				&fbdev->fb_phys, GFP_KERNEL);
-		if (!fbdev->fb_mem) {
-			print_err("fail to allocate frambuffer (size: %dK))",
-				  fbdev->fb_len / 1024);
-			return -ENOMEM;
-		}
-
-		/*
-		 * Set page reserved so that mmap will work. This is necessary
-		 * since we'll be remapping normal memory.
-		 */
-		for (page = (unsigned long)fbdev->fb_phys;
-		     page < PAGE_ALIGN((unsigned long)fbdev->fb_phys +
-			     fbdev->fb_len);
-		     page += PAGE_SIZE) {
-			SetPageReserved(pfn_to_page(page >> PAGE_SHIFT)); /* LCD DMA is NOT coherent on Au1200 */
-		}
-		print_dbg("Framebuffer memory map at %p", fbdev->fb_mem);
-		print_dbg("phys=0x%08x, size=%dK", fbdev->fb_phys, fbdev->fb_len / 1024);
-
-		/* Init FB data */
-		if ((ret = au1200fb_init_fbinfo(fbdev)) < 0)
-			goto failed;
-
-		/* Register new framebuffer */
-		if ((ret = register_framebuffer(&fbdev->fb_info)) < 0) {
-			print_err("cannot register new framebuffer");
-			goto failed;
-		}
-
-		au1200fb_fb_set_par(&fbdev->fb_info);
-
-#if !defined(CONFIG_FRAMEBUFFER_CONSOLE) && defined(CONFIG_LOGO)
-		if (plane == 0)
-			if (fb_prepare_logo(&fbdev->fb_info, FB_ROTATE_UR)) {
-				/* Start display and show logo on boot */
-				fb_set_cmap(&fbdev->fb_info.cmap,
-						&fbdev->fb_info);
-
-				fb_show_logo(&fbdev->fb_info, FB_ROTATE_UR);
-			}
-#endif
-	}
-
-	/* Now hook interrupt too */
-	if ((ret = request_irq(AU1200_LCD_INT, au1200fb_handle_irq,
-		 	  SA_INTERRUPT | SA_SHIRQ, "lcd", (void *)dev)) < 0) {
-		print_err("fail to request interrupt line %d (err: %d)",
-			  AU1200_LCD_INT, ret);
-		goto failed;
-	}
-
-	return 0;
-
-failed:
-	/* NOTE: This only does the current plane/window that failed; others are still active */
-	if (fbdev->fb_mem)
-		dma_free_noncoherent(dev, PAGE_ALIGN(fbdev->fb_len),
-				fbdev->fb_mem, fbdev->fb_phys);
-	if (fbdev->fb_info.cmap.len != 0)
-		fb_dealloc_cmap(&fbdev->fb_info.cmap);
-	if (fbdev->fb_info.pseudo_palette)
-		kfree(fbdev->fb_info.pseudo_palette);
-	if (plane == 0)
-		free_irq(AU1200_LCD_INT, (void*)dev);
-	return ret;
-}
-
-static int au1200fb_drv_remove(struct device *dev)
-{
-	struct au1200fb_device *fbdev;
-	int plane;
-
-	if (!dev)
-		return -ENODEV;
-
-	/* Turn off the panel */
-	au1200_setpanel(NULL);
-
-	for (plane = 0; plane < CONFIG_FB_AU1200_DEVS; ++plane)
-	{
-		fbdev = &_au1200fb_devices[plane];
-
-		/* Clean up all probe data */
-		unregister_framebuffer(&fbdev->fb_info);
-		if (fbdev->fb_mem)
-			dma_free_noncoherent(dev, PAGE_ALIGN(fbdev->fb_len),
-					fbdev->fb_mem, fbdev->fb_phys);
-		if (fbdev->fb_info.cmap.len != 0)
-			fb_dealloc_cmap(&fbdev->fb_info.cmap);
-		if (fbdev->fb_info.pseudo_palette)
-			kfree(fbdev->fb_info.pseudo_palette);
-	}
-
-	free_irq(AU1200_LCD_INT, (void *)dev);
-
-	return 0;
-}
-
-#ifdef CONFIG_PM
-static int au1200fb_drv_suspend(struct device *dev, u32 state, u32 level)
-{
-	/* TODO */
-	return 0;
-}
-
-static int au1200fb_drv_resume(struct device *dev, u32 level)
-{
-	/* TODO */
-	return 0;
-}
-#endif /* CONFIG_PM */
-
-static struct device_driver au1200fb_driver = {
-	.name		= "au1200-lcd",
-	.bus		= &platform_bus_type,
-	.probe		= au1200fb_drv_probe,
-	.remove		= au1200fb_drv_remove,
-#ifdef CONFIG_PM
-	.suspend	= au1200fb_drv_suspend,
-	.resume		= au1200fb_drv_resume,
-#endif
-};
-
-/*-------------------------------------------------------------------------*/
-
-/* Kernel driver */
-
-static void au1200fb_setup(void)
-{
-	char* options = NULL;
-	char* this_opt;
-	int num_panels = ARRAY_SIZE(known_lcd_panels);
-	int panel_idx = -1;
-
-	fb_get_options(DRIVER_NAME, &options);
-
-	if (options) {
-		while ((this_opt = strsep(&options,",")) != NULL) {
-			/* Panel option - can be panel name,
-			 * "bs" for board-switch, or number/index */
-			if (!strncmp(this_opt, "panel:", 6)) {
-				int i;
-				long int li;
-				char *endptr;
-				this_opt += 6;
-				/* First check for index, which allows
-				 * to short circuit this mess */
-				li = simple_strtol(this_opt, &endptr, 0);
-				if (*endptr == '\0') {
-					panel_idx = (int)li;
-				}
-				else if (strcmp(this_opt, "bs") == 0) {
-					extern int board_au1200fb_panel(void);
-					panel_idx = board_au1200fb_panel();
-				}
-
-				else
-				for (i = 0; i < num_panels; i++) {
-					if (!strcmp(this_opt, known_lcd_panels[i].name)) {
-						panel_idx = i;
-						break;
-					}
-				}
-
-				if ((panel_idx < 0) || (panel_idx >= num_panels)) {
-						print_warn("Panel %s not supported!", this_opt);
-				}
-				else
-					panel_index = panel_idx;
-			}
-
-			else if (strncmp(this_opt, "nohwcursor", 10) == 0) {
-				nohwcursor = 1;
-			}
-
-			/* Unsupported option */
-			else {
-				print_warn("Unsupported option \"%s\"", this_opt);
-			}
-		}
-	}
-}
-
-#ifdef CONFIG_PM
-static int au1200fb_pm_callback(au1xxx_power_dev_t *dev,
-		au1xxx_request_t request, void *data) {
-	int retval = -1;
-	unsigned int d = 0;
-	unsigned int brightness = 0;
-
-	if (request == AU1XXX_PM_SLEEP) {
-		board_au1200fb_panel_shutdown();
-	}
-	else if (request == AU1XXX_PM_WAKEUP) {
-		if(dev->prev_state == SLEEP_STATE)
-		{
-			int plane;
-			au1200_setpanel(panel);
-			for (plane = 0; plane < CONFIG_FB_AU1200_DEVS; ++plane) 	{
-				struct au1200fb_device *fbdev;
-				fbdev = &_au1200fb_devices[plane];
-				au1200fb_fb_set_par(&fbdev->fb_info);
-			}
-		}
-
-		d = *((unsigned int*)data);
-		if(d <=10) brightness = 26;
-		else if(d<=20) brightness = 51;
-		else if(d<=30) brightness = 77;
-		else if(d<=40) brightness = 102;
-		else if(d<=50) brightness = 128;
-		else if(d<=60) brightness = 153;
-		else if(d<=70) brightness = 179;
-		else if(d<=80) brightness = 204;
-		else if(d<=90) brightness = 230;
-		else brightness = 255;
-		set_brightness(brightness);
-	} else if (request == AU1XXX_PM_GETSTATUS) {
-		return dev->cur_state;
-	} else if (request == AU1XXX_PM_ACCESS) {
-		if (dev->cur_state != SLEEP_STATE)
-			return retval;
-		else {
-			au1200_setpanel(panel);
-		}
-	} else if (request == AU1XXX_PM_IDLE) {
-	} else if (request == AU1XXX_PM_CLEANUP) {
-	}
-
-	return retval;
-}
-#endif
-
-static int __init au1200fb_init(void)
-{
-	print_info("" DRIVER_DESC "");
-
-	/* Setup driver with options */
-	au1200fb_setup();
-
-	/* Point to the panel selected */
-	panel = &known_lcd_panels[panel_index];
-	win = &windows[window_index];
-
-	printk(DRIVER_NAME ": Panel %d %s\n", panel_index, panel->name);
-	printk(DRIVER_NAME ": Win %d %s\n", window_index, win->name);
-
-	/* Kickstart the panel, the framebuffers/windows come soon enough */
-	au1200_setpanel(panel);
-
-	#ifdef CONFIG_PM
-	LCD_pm_dev = new_au1xxx_power_device("LCD", &au1200fb_pm_callback, NULL);
-	if ( LCD_pm_dev == NULL)
-		printk(KERN_INFO "Unable to create a power management device entry for the au1200fb.\n");
-	else
-		printk(KERN_INFO "Power management device entry for the au1200fb loaded.\n");
-	#endif
-
-	return driver_register(&au1200fb_driver);
-}
-
-static void __exit au1200fb_cleanup(void)
-{
-	driver_unregister(&au1200fb_driver);
-}
-
-module_init(au1200fb_init);
-module_exit(au1200fb_cleanup);
-
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_LICENSE("GPL");
diff --git a/drivers/video/backlight/backlight.c b/drivers/video/backlight/backlight.c
index 334b1db1bd7c..27597c576eff 100644
--- a/drivers/video/backlight/backlight.c
+++ b/drivers/video/backlight/backlight.c
@@ -29,12 +29,15 @@ static ssize_t backlight_show_power(struct class_device *cdev, char *buf)
 
 static ssize_t backlight_store_power(struct class_device *cdev, const char *buf, size_t count)
 {
-	int rc = -ENXIO, power;
+	int rc = -ENXIO;
 	char *endp;
 	struct backlight_device *bd = to_backlight_device(cdev);
+	int power = simple_strtoul(buf, &endp, 0);
+	size_t size = endp - buf;
 
-	power = simple_strtoul(buf, &endp, 0);
-	if (*endp && !isspace(*endp))
+	if (*endp && isspace(*endp))
+		size++;
+	if (size != count)
 		return -EINVAL;
 
 	down(&bd->sem);
@@ -65,12 +68,15 @@ static ssize_t backlight_show_brightness(struct class_device *cdev, char *buf)
 
 static ssize_t backlight_store_brightness(struct class_device *cdev, const char *buf, size_t count)
 {
-	int rc = -ENXIO, brightness;
+	int rc = -ENXIO;
 	char *endp;
 	struct backlight_device *bd = to_backlight_device(cdev);
+	int brightness = simple_strtoul(buf, &endp, 0);
+	size_t size = endp - buf;
 
-	brightness = simple_strtoul(buf, &endp, 0);
-	if (*endp && !isspace(*endp))
+	if (*endp && isspace(*endp))
+		size++;
+	if (size != count)
 		return -EINVAL;
 
 	down(&bd->sem);
diff --git a/drivers/video/backlight/lcd.c b/drivers/video/backlight/lcd.c
index 86908a60c630..bc8ab005a3fb 100644
--- a/drivers/video/backlight/lcd.c
+++ b/drivers/video/backlight/lcd.c
@@ -31,12 +31,15 @@ static ssize_t lcd_show_power(struct class_device *cdev, char *buf)
 
 static ssize_t lcd_store_power(struct class_device *cdev, const char *buf, size_t count)
 {
-	int rc, power;
+	int rc = -ENXIO;
 	char *endp;
 	struct lcd_device *ld = to_lcd_device(cdev);
+	int power = simple_strtoul(buf, &endp, 0);
+	size_t size = endp - buf;
 
-	power = simple_strtoul(buf, &endp, 0);
-	if (*endp && !isspace(*endp))
+	if (*endp && isspace(*endp))
+		size++;
+	if (size != count)
 		return -EINVAL;
 
 	down(&ld->sem);
@@ -44,8 +47,7 @@ static ssize_t lcd_store_power(struct class_device *cdev, const char *buf, size_
 		pr_debug("lcd: set power to %d\n", power);
 		ld->props->set_power(ld, power);
 		rc = count;
-	} else
-		rc = -ENXIO;
+	}
 	up(&ld->sem);
 
 	return rc;
@@ -53,14 +55,12 @@ static ssize_t lcd_store_power(struct class_device *cdev, const char *buf, size_
 
 static ssize_t lcd_show_contrast(struct class_device *cdev, char *buf)
 {
-	int rc;
+	int rc = -ENXIO;
 	struct lcd_device *ld = to_lcd_device(cdev);
 
 	down(&ld->sem);
 	if (likely(ld->props && ld->props->get_contrast))
 		rc = sprintf(buf, "%d\n", ld->props->get_contrast(ld));
-	else
-		rc = -ENXIO;
 	up(&ld->sem);
 
 	return rc;
@@ -68,12 +68,15 @@ static ssize_t lcd_show_contrast(struct class_device *cdev, char *buf)
 
 static ssize_t lcd_store_contrast(struct class_device *cdev, const char *buf, size_t count)
 {
-	int rc, contrast;
+	int rc = -ENXIO;
 	char *endp;
 	struct lcd_device *ld = to_lcd_device(cdev);
+	int contrast = simple_strtoul(buf, &endp, 0);
+	size_t size = endp - buf;
 
-	contrast = simple_strtoul(buf, &endp, 0);
-	if (*endp && !isspace(*endp))
+	if (*endp && isspace(*endp))
+		size++;
+	if (size != count)
 		return -EINVAL;
 
 	down(&ld->sem);
@@ -81,8 +84,7 @@ static ssize_t lcd_store_contrast(struct class_device *cdev, const char *buf, si
 		pr_debug("lcd: set contrast to %d\n", contrast);
 		ld->props->set_contrast(ld, contrast);
 		rc = count;
-	} else
-		rc = -ENXIO;
+	}
 	up(&ld->sem);
 
 	return rc;
@@ -90,14 +92,12 @@ static ssize_t lcd_store_contrast(struct class_device *cdev, const char *buf, si
 
 static ssize_t lcd_show_max_contrast(struct class_device *cdev, char *buf)
 {
-	int rc;
+	int rc = -ENXIO;
 	struct lcd_device *ld = to_lcd_device(cdev);
 
 	down(&ld->sem);
 	if (likely(ld->props))
 		rc = sprintf(buf, "%d\n", ld->props->max_contrast);
-	else
-		rc = -ENXIO;
 	up(&ld->sem);
 
 	return rc;
diff --git a/drivers/video/console/fbcon.c b/drivers/video/console/fbcon.c
index ca020719d20b..47ba1a79adcd 100644
--- a/drivers/video/console/fbcon.c
+++ b/drivers/video/console/fbcon.c
@@ -1745,7 +1745,7 @@ static int fbcon_scroll(struct vc_data *vc, int t, int b, int dir,
 					fbcon_redraw_move(vc, p, 0, t, count);
 				ypan_up_redraw(vc, t, count);
 				if (vc->vc_rows - b > 0)
-					fbcon_redraw_move(vc, p, b - count,
+					fbcon_redraw_move(vc, p, b,
 							  vc->vc_rows - b, b);
 			} else
 				fbcon_redraw_move(vc, p, t + count, b - t - count, t);
@@ -2631,7 +2631,7 @@ static int fbcon_scrolldelta(struct vc_data *vc, int lines)
 					scr_memcpyw((u16 *) q, (u16 *) p,
 						    vc->vc_size_row);
 				}
-				softback_in = p;
+				softback_in = softback_curr = p;
 				update_region(vc, vc->vc_origin,
 					      logo_lines * vc->vc_cols);
 			}
diff --git a/drivers/video/fbmem.c b/drivers/video/fbmem.c
index 8d8eadb64853..372aa1776827 100644
--- a/drivers/video/fbmem.c
+++ b/drivers/video/fbmem.c
@@ -674,13 +674,19 @@ fb_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos)
 		total_size = info->fix.smem_len;
 
 	if (p > total_size)
-		return 0;
+		return -EFBIG;
 
-	if (count >= total_size)
+	if (count > total_size) {
+		err = -EFBIG;
 		count = total_size;
+	}
+
+	if (count + p > total_size) {
+		if (!err)
+			err = -ENOSPC;
 
-	if (count + p > total_size)
 		count = total_size - p;
+	}
 
 	buffer = kmalloc((count > PAGE_SIZE) ? PAGE_SIZE : count,
 			 GFP_KERNEL);
@@ -722,7 +728,7 @@ fb_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos)
 
 	kfree(buffer);
 
-	return (err) ? err : cnt;
+	return (cnt) ? cnt : err;
 }
 
 #ifdef CONFIG_KMOD
diff --git a/drivers/video/fbsysfs.c b/drivers/video/fbsysfs.c
index b72b05250a9d..34e07399756b 100644
--- a/drivers/video/fbsysfs.c
+++ b/drivers/video/fbsysfs.c
@@ -305,94 +305,6 @@ static ssize_t show_stride(struct class_device *class_device, char *buf)
 	return snprintf(buf, PAGE_SIZE, "%d\n", fb_info->fix.line_length);
 }
 
-/* Format for cmap is "%02x%c%4x%4x%4x\n" */
-/* %02x entry %c transp %4x red %4x blue %4x green \n */
-/* 256 rows at 16 chars equals 4096, the normal page size */
-/* the code will automatically adjust for different page sizes */
-static ssize_t store_cmap(struct class_device *class_device, const char *buf,
-			  size_t count)
-{
-	struct fb_info *fb_info = class_get_devdata(class_device);
-	int rc, i, start, length, transp = 0;
-
-	if ((count > PAGE_SIZE) || ((count % 16) != 0))
-		return -EINVAL;
-
-	if (!fb_info->fbops->fb_setcolreg && !fb_info->fbops->fb_setcmap)
-		return -EINVAL;
-
-	sscanf(buf, "%02x", &start);
-	length = count / 16;
-
-	for (i = 0; i < length; i++)
-		if (buf[i * 16 + 2] != ' ')
-			transp = 1;
-
-	/* If we can batch, do it */
-	if (fb_info->fbops->fb_setcmap && length > 1) {
-		struct fb_cmap umap;
-
-		memset(&umap, 0, sizeof(umap));
-		if ((rc = fb_alloc_cmap(&umap, length, transp)))
-			return rc;
-
-		umap.start = start;
-		for (i = 0; i < length; i++) {
-			sscanf(&buf[i * 16 +  3], "%4hx", &umap.red[i]);
-			sscanf(&buf[i * 16 +  7], "%4hx", &umap.blue[i]);
-			sscanf(&buf[i * 16 + 11], "%4hx", &umap.green[i]);
-			if (transp)
-				umap.transp[i] = (buf[i * 16 +  2] != ' ');
-		}
-		rc = fb_info->fbops->fb_setcmap(&umap, fb_info);
-		fb_copy_cmap(&umap, &fb_info->cmap);
-		fb_dealloc_cmap(&umap);
-
-		return rc ?: count;
-	}
-	for (i = 0; i < length; i++) {
-		u16 red, blue, green, tsp;
-
-		sscanf(&buf[i * 16 +  3], "%4hx", &red);
-		sscanf(&buf[i * 16 +  7], "%4hx", &blue);
-		sscanf(&buf[i * 16 + 11], "%4hx", &green);
-		tsp = (buf[i * 16 +  2] != ' ');
-		if ((rc = fb_info->fbops->fb_setcolreg(start++,
-				      red, green, blue, tsp, fb_info)))
-			return rc;
-
-		fb_info->cmap.red[i] = red;
-		fb_info->cmap.blue[i] = blue;
-		fb_info->cmap.green[i] = green;
-		if (transp)
-			fb_info->cmap.transp[i] = tsp;
-	}
-	return count;
-}
-
-static ssize_t show_cmap(struct class_device *class_device, char *buf)
-{
-	struct fb_info *fb_info = class_get_devdata(class_device);
-	unsigned int i;
-
-	if (!fb_info->cmap.red || !fb_info->cmap.blue ||
-	   !fb_info->cmap.green)
-		return -EINVAL;
-
-	if (fb_info->cmap.len > PAGE_SIZE / 16)
-		return -EINVAL;
-
-	/* don't mess with the format, the buffer is PAGE_SIZE */
-	/* 256 entries at 16 chars per line equals 4096 = PAGE_SIZE */
-	for (i = 0; i < fb_info->cmap.len; i++) {
-		snprintf(&buf[ i * 16], PAGE_SIZE - i * 16, "%02x%c%4x%4x%4x\n", i + fb_info->cmap.start,
-			((fb_info->cmap.transp && fb_info->cmap.transp[i]) ? '*' : ' '),
-			fb_info->cmap.red[i], fb_info->cmap.blue[i],
-			fb_info->cmap.green[i]);
-	}
-	return 16 * fb_info->cmap.len;
-}
-
 static ssize_t store_blank(struct class_device *class_device, const char * buf,
 			   size_t count)
 {
@@ -502,10 +414,12 @@ static ssize_t show_fbstate(struct class_device *class_device, char *buf)
 	return snprintf(buf, PAGE_SIZE, "%d\n", fb_info->state);
 }
 
+/* When cmap is added back in it should be a binary attribute
+ * not a text one. Consideration should also be given to converting
+ * fbdev to use configfs instead of sysfs */
 static struct class_device_attribute class_device_attrs[] = {
 	__ATTR(bits_per_pixel, S_IRUGO|S_IWUSR, show_bpp, store_bpp),
 	__ATTR(blank, S_IRUGO|S_IWUSR, show_blank, store_blank),
-	__ATTR(color_map, S_IRUGO|S_IWUSR, show_cmap, store_cmap),
 	__ATTR(console, S_IRUGO|S_IWUSR, show_console, store_console),
 	__ATTR(cursor, S_IRUGO|S_IWUSR, show_cursor, store_cursor),
 	__ATTR(mode, S_IRUGO|S_IWUSR, show_mode, store_mode),
diff --git a/drivers/video/i810/i810_main.c b/drivers/video/i810/i810_main.c
index 788297e9d59e..44aa2ffff973 100644
--- a/drivers/video/i810/i810_main.c
+++ b/drivers/video/i810/i810_main.c
@@ -76,8 +76,8 @@
  *
  * Experiment with v_offset to find out which works best for you.
  */
-static u32 v_offset_default __initdata; /* For 32 MiB Aper size, 8 should be the default */
-static u32 voffset          __initdata = 0;
+static u32 v_offset_default __devinitdata; /* For 32 MiB Aper size, 8 should be the default */
+static u32 voffset          __devinitdata;
 
 static int i810fb_cursor(struct fb_info *info, struct fb_cursor *cursor);
 static int  __devinit i810fb_init_pci (struct pci_dev *dev,
diff --git a/drivers/video/logo/Makefile b/drivers/video/logo/Makefile
index 4ef5cd19609d..b985dfad6c63 100644
--- a/drivers/video/logo/Makefile
+++ b/drivers/video/logo/Makefile
@@ -34,7 +34,7 @@ extra-y += $(call logo-cfiles,_clut224,ppm)
 extra-y += $(call logo-cfiles,_gray256,pgm)
 
 # Create commands like "pnmtologo -t mono -n logo_mac_mono -o ..."
-quiet_cmd_logo = LOGO	$@
+quiet_cmd_logo = LOGO    $@
 	cmd_logo = scripts/pnmtologo \
 			-t $(patsubst $*_%,%,$(notdir $(basename $<))) \
 			-n $(notdir $(basename $<)) -o $@ $<
diff --git a/drivers/video/matrox/g450_pll.c b/drivers/video/matrox/g450_pll.c
index 8073a73f6f35..440272ad10e7 100644
--- a/drivers/video/matrox/g450_pll.c
+++ b/drivers/video/matrox/g450_pll.c
@@ -316,14 +316,24 @@ static int __g450_setclk(WPMINFO unsigned int fout, unsigned int pll,
 		case M_PIXEL_PLL_B:
 		case M_PIXEL_PLL_C:
 			{
-				u_int8_t tmp;
+				u_int8_t tmp, xpwrctrl;
 				unsigned long flags;
 				
 				matroxfb_DAC_lock_irqsave(flags);
+
+				xpwrctrl = matroxfb_DAC_in(PMINFO M1064_XPWRCTRL);
+				matroxfb_DAC_out(PMINFO M1064_XPWRCTRL, xpwrctrl & ~M1064_XPWRCTRL_PANELPDN);
+				mga_outb(M_SEQ_INDEX, M_SEQ1);
+				mga_outb(M_SEQ_DATA, mga_inb(M_SEQ_DATA) | M_SEQ1_SCROFF);
 				tmp = matroxfb_DAC_in(PMINFO M1064_XPIXCLKCTRL);
+				tmp |= M1064_XPIXCLKCTRL_DIS;
 				if (!(tmp & M1064_XPIXCLKCTRL_PLL_UP)) {
-					matroxfb_DAC_out(PMINFO M1064_XPIXCLKCTRL, tmp | M1064_XPIXCLKCTRL_PLL_UP);
+					tmp |= M1064_XPIXCLKCTRL_PLL_UP;
 				}
+				matroxfb_DAC_out(PMINFO M1064_XPIXCLKCTRL, tmp);
+				matroxfb_DAC_out(PMINFO M1064_XDVICLKCTRL, 0);
+				matroxfb_DAC_out(PMINFO M1064_XPWRCTRL, xpwrctrl);
+
 				matroxfb_DAC_unlock_irqrestore(flags);
 			}
 			{
@@ -418,6 +428,15 @@ static int __g450_setclk(WPMINFO unsigned int fout, unsigned int pll,
 				   frequency to higher - with <= lowest wins, while
 				   with < highest one wins */
 				if (delta <= deltaarray[idx-1]) {
+					/* all else being equal except VCO,
+					 * choose VCO not near (within 1/16th or so) VCOmin
+					 * (freqs near VCOmin aren't as stable)
+					 */
+					if (delta == deltaarray[idx-1]
+					    && vco != g450_mnp2vco(PMINFO mnparray[idx-1])
+					    && vco < (pi->vcomin * 17 / 16)) {
+						break;
+					}
 					mnparray[idx] = mnparray[idx-1];
 					deltaarray[idx] = deltaarray[idx-1];
 				} else {
diff --git a/drivers/video/matrox/matroxfb_DAC1064.h b/drivers/video/matrox/matroxfb_DAC1064.h
index 2e7238aa2432..56513a5d220b 100644
--- a/drivers/video/matrox/matroxfb_DAC1064.h
+++ b/drivers/video/matrox/matroxfb_DAC1064.h
@@ -40,6 +40,7 @@ void DAC1064_global_restore(WPMINFO2);
 #define M1064_XCURCOL1RED	0x0C
 #define M1064_XCURCOL1GREEN	0x0D
 #define M1064_XCURCOL1BLUE	0x0E
+#define M1064_XDVICLKCTRL	0x0F
 #define M1064_XCURCOL2RED	0x10
 #define M1064_XCURCOL2GREEN	0x11
 #define M1064_XCURCOL2BLUE	0x12
@@ -144,6 +145,7 @@ void DAC1064_global_restore(WPMINFO2);
 #define M1064_XVIDPLLN		0x8F
 
 #define M1064_XPWRCTRL		0xA0
+#define     M1064_XPWRCTRL_PANELPDN	0x04
 
 #define M1064_XPANMODE		0xA2
 
diff --git a/drivers/video/matrox/matroxfb_base.h b/drivers/video/matrox/matroxfb_base.h
index 3a3e1804c56a..b71737178d0d 100644
--- a/drivers/video/matrox/matroxfb_base.h
+++ b/drivers/video/matrox/matroxfb_base.h
@@ -672,6 +672,8 @@ void matroxfb_unregister_driver(struct matroxfb_driver* drv);
 
 #define M_SEQ_INDEX	0x1FC4
 #define M_SEQ_DATA	0x1FC5
+#define     M_SEQ1		0x01
+#define        M_SEQ1_SCROFF		0x20
 
 #define M_MISC_REG_READ	0x1FCC
 
diff --git a/drivers/video/maxinefb.c b/drivers/video/maxinefb.c
index 743e7ad26acc..f85421bf7cb5 100644
--- a/drivers/video/maxinefb.c
+++ b/drivers/video/maxinefb.c
@@ -55,7 +55,7 @@ static struct fb_var_screeninfo maxinefb_defined = {
 };
 
 static struct fb_fix_screeninfo maxinefb_fix = {
-	.id =		"Maxine onboard graphics 1024x768x8",
+	.id =		"Maxine",
 	.smem_len =	(1024*768),
 	.type =		FB_TYPE_PACKED_PIXELS,
 	.visual =	FB_VISUAL_PSEUDOCOLOR,
@@ -107,8 +107,6 @@ static int maxinefb_setcolreg(unsigned regno, unsigned red, unsigned green,
 
 static struct fb_ops maxinefb_ops = {
 	.owner		= THIS_MODULE,
-	.fb_get_fix	= gen_get_fix,
-	.fb_get_var	= gen_get_var,
 	.fb_setcolreg	= maxinefb_setcolreg,
 	.fb_fillrect	= cfb_fillrect,
 	.fb_copyarea	= cfb_copyarea,
diff --git a/drivers/video/pm2fb.c b/drivers/video/pm2fb.c
index 5fe197943deb..4e963930b50a 100644
--- a/drivers/video/pm2fb.c
+++ b/drivers/video/pm2fb.c
@@ -73,8 +73,8 @@ static char *mode __devinitdata = NULL;
  * these flags allow the user to specify that requests for +ve sync
  * should be silently turned in -ve sync.
  */
-static int lowhsync __devinitdata = 0;
-static int lowvsync __devinitdata = 0;
+static int lowhsync;
+static int lowvsync;
 
 /*
  * The hardware state of the graphics card that isn't part of the
diff --git a/drivers/video/savage/savagefb_driver.c b/drivers/video/savage/savagefb_driver.c
index 10e6b3aab9ea..0da624e6524f 100644
--- a/drivers/video/savage/savagefb_driver.c
+++ b/drivers/video/savage/savagefb_driver.c
@@ -73,7 +73,7 @@
 /* --------------------------------------------------------------------- */
 
 
-static char *mode_option __initdata = NULL;
+static char *mode_option __devinitdata = NULL;
 
 #ifdef MODULE
 
@@ -1545,7 +1545,7 @@ static int __devinit savage_map_mmio (struct fb_info *info)
 	return 0;
 }
 
-static void __devinit savage_unmap_mmio (struct fb_info *info)
+static void savage_unmap_mmio (struct fb_info *info)
 {
 	struct savagefb_par *par = info->par;
 	DBG ("savage_unmap_mmio");
@@ -1597,7 +1597,7 @@ static int __devinit savage_map_video (struct fb_info *info,
 	return 0;
 }
 
-static void __devinit savage_unmap_video (struct fb_info *info)
+static void savage_unmap_video (struct fb_info *info)
 {
 	struct savagefb_par *par = info->par;
 
@@ -1614,7 +1614,7 @@ static void __devinit savage_unmap_video (struct fb_info *info)
 	}
 }
 
-static int __devinit savage_init_hw (struct savagefb_par *par)
+static int savage_init_hw (struct savagefb_par *par)
 {
 	unsigned char config1, m, n, n1, n2, sr8, cr3f, cr66 = 0, tmp;
 
diff --git a/fs/9p/fcall.c b/fs/9p/fcall.c
index 71742ba150c4..6f2617820a4e 100644
--- a/fs/9p/fcall.c
+++ b/fs/9p/fcall.c
@@ -98,23 +98,20 @@ v9fs_t_attach(struct v9fs_session_info *v9ses, char *uname, char *aname,
 static void v9fs_t_clunk_cb(void *a, struct v9fs_fcall *tc,
 	struct v9fs_fcall *rc, int err)
 {
-	int fid;
+	int fid, id;
 	struct v9fs_session_info *v9ses;
 
-	if (err)
-		return;
-
+	id = 0;
 	fid = tc->params.tclunk.fid;
-	kfree(tc);
-
-	if (!rc)
-		return;
-
-	v9ses = a;
-	if (rc->id == RCLUNK)
-		v9fs_put_idpool(fid, &v9ses->fidpool);
+	if (rc)
+		id = rc->id;
 
+	kfree(tc);
 	kfree(rc);
+	if (id == RCLUNK) {
+		v9ses = a;
+		v9fs_put_idpool(fid, &v9ses->fidpool);
+	}
 }
 
 /**
diff --git a/fs/9p/mux.c b/fs/9p/mux.c
index 3e5b124a7212..f4407eb276c7 100644
--- a/fs/9p/mux.c
+++ b/fs/9p/mux.c
@@ -50,15 +50,23 @@ enum {
 	Wpending = 8,		/* can write */
 };
 
+enum {
+	None,
+	Flushing,
+	Flushed,
+};
+
 struct v9fs_mux_poll_task;
 
 struct v9fs_req {
+	spinlock_t lock;
 	int tag;
 	struct v9fs_fcall *tcall;
 	struct v9fs_fcall *rcall;
 	int err;
 	v9fs_mux_req_callback cb;
 	void *cba;
+	int flush;
 	struct list_head req_list;
 };
 
@@ -96,8 +104,8 @@ struct v9fs_mux_poll_task {
 
 struct v9fs_mux_rpc {
 	struct v9fs_mux_data *m;
-	struct v9fs_req *req;
 	int err;
+	struct v9fs_fcall *tcall;
 	struct v9fs_fcall *rcall;
 	wait_queue_head_t wqueue;
 };
@@ -524,10 +532,9 @@ again:
 
 static void process_request(struct v9fs_mux_data *m, struct v9fs_req *req)
 {
-	int ecode, tag;
+	int ecode;
 	struct v9fs_str *ename;
 
-	tag = req->tag;
 	if (!req->err && req->rcall->id == RERROR) {
 		ecode = req->rcall->params.rerror.errno;
 		ename = &req->rcall->params.rerror.error;
@@ -553,23 +560,6 @@ static void process_request(struct v9fs_mux_data *m, struct v9fs_req *req)
 		if (!req->err)
 			req->err = -EIO;
 	}
-
-	if (req->err == ERREQFLUSH)
-		return;
-
-	if (req->cb) {
-		dprintk(DEBUG_MUX, "calling callback tcall %p rcall %p\n",
-			req->tcall, req->rcall);
-
-		(*req->cb) (req->cba, req->tcall, req->rcall, req->err);
-		req->cb = NULL;
-	} else
-		kfree(req->rcall);
-
-	v9fs_mux_put_tag(m, tag);
-
-	wake_up(&m->equeue);
-	kfree(req);
 }
 
 /**
@@ -669,17 +659,26 @@ static void v9fs_read_work(void *a)
 		list_for_each_entry_safe(rreq, rptr, &m->req_list, req_list) {
 			if (rreq->tag == rcall->tag) {
 				req = rreq;
-				req->rcall = rcall;
-				list_del(&req->req_list);
-				spin_unlock(&m->lock);
-				process_request(m, req);
+				if (req->flush != Flushing)
+					list_del(&req->req_list);
 				break;
 			}
-
 		}
+		spin_unlock(&m->lock);
 
-		if (!req) {
-			spin_unlock(&m->lock);
+		if (req) {
+			req->rcall = rcall;
+			process_request(m, req);
+
+			if (req->flush != Flushing) {
+				if (req->cb)
+					(*req->cb) (req, req->cba);
+				else
+					kfree(req->rcall);
+
+				wake_up(&m->equeue);
+			}
+		} else {
 			if (err >= 0 && rcall->id != RFLUSH)
 				dprintk(DEBUG_ERROR,
 					"unexpected response mux %p id %d tag %d\n",
@@ -746,7 +745,6 @@ static struct v9fs_req *v9fs_send_request(struct v9fs_mux_data *m,
 		return ERR_PTR(-ENOMEM);
 
 	v9fs_set_tag(tc, n);
-
 	if ((v9fs_debug_level&DEBUG_FCALL) == DEBUG_FCALL) {
 		char buf[150];
 
@@ -754,12 +752,14 @@ static struct v9fs_req *v9fs_send_request(struct v9fs_mux_data *m,
 		printk(KERN_NOTICE "<<< %p %s\n", m, buf);
 	}
 
+	spin_lock_init(&req->lock);
 	req->tag = n;
 	req->tcall = tc;
 	req->rcall = NULL;
 	req->err = 0;
 	req->cb = cb;
 	req->cba = cba;
+	req->flush = None;
 
 	spin_lock(&m->lock);
 	list_add_tail(&req->req_list, &m->unsent_req_list);
@@ -776,72 +776,108 @@ static struct v9fs_req *v9fs_send_request(struct v9fs_mux_data *m,
 	return req;
 }
 
-static void v9fs_mux_flush_cb(void *a, struct v9fs_fcall *tc,
-			      struct v9fs_fcall *rc, int err)
+static void v9fs_mux_free_request(struct v9fs_mux_data *m, struct v9fs_req *req)
+{
+	v9fs_mux_put_tag(m, req->tag);
+	kfree(req);
+}
+
+static void v9fs_mux_flush_cb(struct v9fs_req *freq, void *a)
 {
 	v9fs_mux_req_callback cb;
 	int tag;
 	struct v9fs_mux_data *m;
-	struct v9fs_req *req, *rptr;
+	struct v9fs_req *req, *rreq, *rptr;
 
 	m = a;
-	dprintk(DEBUG_MUX, "mux %p tc %p rc %p err %d oldtag %d\n", m, tc,
-		rc, err, tc->params.tflush.oldtag);
+	dprintk(DEBUG_MUX, "mux %p tc %p rc %p err %d oldtag %d\n", m,
+		freq->tcall, freq->rcall, freq->err,
+		freq->tcall->params.tflush.oldtag);
 
 	spin_lock(&m->lock);
 	cb = NULL;
-	tag = tc->params.tflush.oldtag;
-	list_for_each_entry_safe(req, rptr, &m->req_list, req_list) {
-		if (req->tag == tag) {
+	tag = freq->tcall->params.tflush.oldtag;
+	req = NULL;
+	list_for_each_entry_safe(rreq, rptr, &m->req_list, req_list) {
+		if (rreq->tag == tag) {
+			req = rreq;
 			list_del(&req->req_list);
-			if (req->cb) {
-				cb = req->cb;
-				req->cb = NULL;
-				spin_unlock(&m->lock);
-				(*cb) (req->cba, req->tcall, req->rcall,
-				       req->err);
-			}
-			kfree(req);
-			wake_up(&m->equeue);
 			break;
 		}
 	}
+	spin_unlock(&m->lock);
 
-	if (!cb)
-		spin_unlock(&m->lock);
+	if (req) {
+		spin_lock(&req->lock);
+		req->flush = Flushed;
+		spin_unlock(&req->lock);
+
+		if (req->cb)
+			(*req->cb) (req, req->cba);
+		else
+			kfree(req->rcall);
+
+		wake_up(&m->equeue);
+	}
 
-	v9fs_mux_put_tag(m, tag);
-	kfree(tc);
-	kfree(rc);
+	kfree(freq->tcall);
+	kfree(freq->rcall);
+	v9fs_mux_free_request(m, freq);
 }
 
-static void
+static int
 v9fs_mux_flush_request(struct v9fs_mux_data *m, struct v9fs_req *req)
 {
 	struct v9fs_fcall *fc;
+	struct v9fs_req *rreq, *rptr;
 
 	dprintk(DEBUG_MUX, "mux %p req %p tag %d\n", m, req, req->tag);
 
+	/* if a response was received for a request, do nothing */
+	spin_lock(&req->lock);
+	if (req->rcall || req->err) {
+		spin_unlock(&req->lock);
+		dprintk(DEBUG_MUX, "mux %p req %p response already received\n", m, req);
+		return 0;
+	}
+
+	req->flush = Flushing;
+	spin_unlock(&req->lock);
+
+	spin_lock(&m->lock);
+	/* if the request is not sent yet, just remove it from the list */
+	list_for_each_entry_safe(rreq, rptr, &m->unsent_req_list, req_list) {
+		if (rreq->tag == req->tag) {
+			dprintk(DEBUG_MUX, "mux %p req %p request is not sent yet\n", m, req);
+			list_del(&rreq->req_list);
+			req->flush = Flushed;
+			spin_unlock(&m->lock);
+			if (req->cb)
+				(*req->cb) (req, req->cba);
+			return 0;
+		}
+	}
+	spin_unlock(&m->lock);
+
+	clear_thread_flag(TIF_SIGPENDING);
 	fc = v9fs_create_tflush(req->tag);
 	v9fs_send_request(m, fc, v9fs_mux_flush_cb, m);
+	return 1;
 }
 
 static void
-v9fs_mux_rpc_cb(void *a, struct v9fs_fcall *tc, struct v9fs_fcall *rc, int err)
+v9fs_mux_rpc_cb(struct v9fs_req *req, void *a)
 {
 	struct v9fs_mux_rpc *r;
 
-	if (err == ERREQFLUSH) {
-		kfree(rc);
-		dprintk(DEBUG_MUX, "err req flush\n");
-		return;
-	}
-
+	dprintk(DEBUG_MUX, "req %p r %p\n", req, a);
 	r = a;
-	dprintk(DEBUG_MUX, "mux %p req %p tc %p rc %p err %d\n", r->m, r->req,
-		tc, rc, err);
-	r->rcall = rc;
-	r->err = err;
+	r->rcall = req->rcall;
+	r->err = req->err;
+
+	if (req->flush!=None && !req->err)
+		r->err = -ERESTARTSYS;
+
 	wake_up(&r->wqueue);
 }
 
@@ -856,12 +892,13 @@ int
 v9fs_mux_rpc(struct v9fs_mux_data *m, struct v9fs_fcall *tc,
 	     struct v9fs_fcall **rc)
 {
-	int err;
+	int err, sigpending;
 	unsigned long flags;
 	struct v9fs_req *req;
 	struct v9fs_mux_rpc r;
 
 	r.err = 0;
+	r.tcall = tc;
 	r.rcall = NULL;
 	r.m = m;
 	init_waitqueue_head(&r.wqueue);
@@ -869,48 +906,50 @@ v9fs_mux_rpc(struct v9fs_mux_data *m, struct v9fs_fcall *tc,
 	if (rc)
 		*rc = NULL;
 
+	sigpending = 0;
+	if (signal_pending(current)) {
+		sigpending = 1;
+		clear_thread_flag(TIF_SIGPENDING);
+	}
+
 	req = v9fs_send_request(m, tc, v9fs_mux_rpc_cb, &r);
 	if (IS_ERR(req)) {
 		err = PTR_ERR(req);
 		dprintk(DEBUG_MUX, "error %d\n", err);
-		return PTR_ERR(req);
+		return err;
 	}
 
-	r.req = req;
-	dprintk(DEBUG_MUX, "mux %p tc %p tag %d rpc %p req %p\n", m, tc,
-		req->tag, &r, req);
 	err = wait_event_interruptible(r.wqueue, r.rcall != NULL || r.err < 0);
 	if (r.err < 0)
 		err = r.err;
 
 	if (err == -ERESTARTSYS && m->trans->status == Connected && m->err == 0) {
-		spin_lock(&m->lock);
-		req->tcall = NULL;
-		req->err = ERREQFLUSH;
-		spin_unlock(&m->lock);
+		if (v9fs_mux_flush_request(m, req)) {
+			/* wait until we get response of the flush message */
+			do {
+				clear_thread_flag(TIF_SIGPENDING);
+				err = wait_event_interruptible(r.wqueue,
+					r.rcall || r.err);
+			} while (!r.rcall && !r.err && err==-ERESTARTSYS &&
+				m->trans->status==Connected && !m->err);
+		}
+		sigpending = 1;
+	}
 
-		clear_thread_flag(TIF_SIGPENDING);
-		v9fs_mux_flush_request(m, req);
+	if (sigpending) {
 		spin_lock_irqsave(&current->sighand->siglock, flags);
 		recalc_sigpending();
 		spin_unlock_irqrestore(&current->sighand->siglock, flags);
 	}
 
-	if (!err) {
-		if (r.rcall)
-			dprintk(DEBUG_MUX, "got response id %d tag %d\n",
-				r.rcall->id, r.rcall->tag);
-
-		if (rc)
-			*rc = r.rcall;
-		else
-			kfree(r.rcall);
-	} else {
+	if (rc)
+		*rc = r.rcall;
+	else
 		kfree(r.rcall);
-		dprintk(DEBUG_MUX, "got error %d\n", err);
-		if (err > 0)
-			err = -EIO;
-	}
+
+	v9fs_mux_free_request(m, req);
+	if (err > 0)
+		err = -EIO;
 
 	return err;
 }
@@ -951,12 +990,15 @@ void v9fs_mux_cancel(struct v9fs_mux_data *m, int err)
 	struct v9fs_req *req, *rtmp;
 	LIST_HEAD(cancel_list);
 
-	dprintk(DEBUG_MUX, "mux %p err %d\n", m, err);
+	dprintk(DEBUG_ERROR, "mux %p err %d\n", m, err);
 	m->err = err;
 	spin_lock(&m->lock);
 	list_for_each_entry_safe(req, rtmp, &m->req_list, req_list) {
 		list_move(&req->req_list, &cancel_list);
 	}
+	list_for_each_entry_safe(req, rtmp, &m->unsent_req_list, req_list) {
+		list_move(&req->req_list, &cancel_list);
+	}
 	spin_unlock(&m->lock);
 
 	list_for_each_entry_safe(req, rtmp, &cancel_list, req_list) {
@@ -965,11 +1007,9 @@ void v9fs_mux_cancel(struct v9fs_mux_data *m, int err)
 			req->err = err;
 
 		if (req->cb)
-			(*req->cb) (req->cba, req->tcall, req->rcall, req->err);
+			(*req->cb) (req, req->cba);
 		else
 			kfree(req->rcall);
-
-		kfree(req);
 	}
 
 	wake_up(&m->equeue);
diff --git a/fs/9p/mux.h b/fs/9p/mux.h
index e90bfd32ea42..fb10c50186a1 100644
--- a/fs/9p/mux.h
+++ b/fs/9p/mux.h
@@ -24,6 +24,7 @@
  */
 
 struct v9fs_mux_data;
+struct v9fs_req;
 
 /**
  * v9fs_mux_req_callback - callback function that is called when the
@@ -36,8 +37,7 @@ struct v9fs_mux_data;
  * @rc - response call
  * @err - error code (non-zero if error occured)
  */
-typedef void (*v9fs_mux_req_callback)(void *a, struct v9fs_fcall *tc,
-	struct v9fs_fcall *rc, int err);
+typedef void (*v9fs_mux_req_callback)(struct v9fs_req *req, void *a);
 
 int v9fs_mux_global_init(void);
 void v9fs_mux_global_exit(void);
diff --git a/fs/9p/vfs_file.c b/fs/9p/vfs_file.c
index 083dcfcd158e..1a8e46084f0e 100644
--- a/fs/9p/vfs_file.c
+++ b/fs/9p/vfs_file.c
@@ -72,11 +72,17 @@ int v9fs_file_open(struct inode *inode, struct file *file)
 		return -ENOSPC;
 	}
 
-	err = v9fs_t_walk(v9ses, vfid->fid, fid, NULL, NULL);
+	err = v9fs_t_walk(v9ses, vfid->fid, fid, NULL, &fcall);
 	if (err < 0) {
 		dprintk(DEBUG_ERROR, "rewalk didn't work\n");
-		goto put_fid;
+		if (fcall && fcall->id == RWALK)
+			goto clunk_fid;
+		else {
+			v9fs_put_idpool(fid, &v9ses->fidpool);
+			goto free_fcall;
+		}
 	}
+	kfree(fcall);
 
 	/* TODO: do special things for O_EXCL, O_NOFOLLOW, O_SYNC */
 	/* translate open mode appropriately */
@@ -109,8 +115,7 @@ int v9fs_file_open(struct inode *inode, struct file *file)
 clunk_fid:
 	v9fs_t_clunk(v9ses, fid);
 
-put_fid:
-	v9fs_put_idpool(fid, &v9ses->fidpool);
+free_fcall:
 	kfree(fcall);
 
 	return err;
diff --git a/fs/9p/vfs_inode.c b/fs/9p/vfs_inode.c
index 133db366d306..2cb87ba4b1c1 100644
--- a/fs/9p/vfs_inode.c
+++ b/fs/9p/vfs_inode.c
@@ -270,7 +270,10 @@ v9fs_create(struct v9fs_session_info *v9ses, u32 pfid, char *name, u32 perm,
 	err = v9fs_t_walk(v9ses, pfid, fid, NULL, &fcall);
 	if (err < 0) {
 		PRINT_FCALL_ERROR("clone error", fcall);
-		goto put_fid;
+		if (fcall && fcall->id == RWALK)
+			goto clunk_fid;
+		else
+			goto put_fid;
 	}
 	kfree(fcall);
 
@@ -322,6 +325,9 @@ v9fs_clone_walk(struct v9fs_session_info *v9ses, u32 fid, struct dentry *dentry)
 		&fcall);
 
 	if (err < 0) {
+		if (fcall && fcall->id == RWALK)
+			goto clunk_fid;
+
 		PRINT_FCALL_ERROR("walk error", fcall);
 		v9fs_put_idpool(nfid, &v9ses->fidpool);
 		goto error;
@@ -640,19 +646,26 @@ static struct dentry *v9fs_vfs_lookup(struct inode *dir, struct dentry *dentry,
 	}
 
 	result = v9fs_t_walk(v9ses, dirfidnum, newfid,
-		(char *)dentry->d_name.name, NULL);
+		(char *)dentry->d_name.name, &fcall);
+
 	if (result < 0) {
-		v9fs_put_idpool(newfid, &v9ses->fidpool);
+		if (fcall && fcall->id == RWALK)
+			v9fs_t_clunk(v9ses, newfid);
+		else
+			v9fs_put_idpool(newfid, &v9ses->fidpool);
+
 		if (result == -ENOENT) {
 			d_add(dentry, NULL);
 			dprintk(DEBUG_VFS,
 				"Return negative dentry %p count %d\n",
 				dentry, atomic_read(&dentry->d_count));
+			kfree(fcall);
 			return NULL;
 		}
 		dprintk(DEBUG_ERROR, "walk error:%d\n", result);
 		goto FreeFcall;
 	}
+	kfree(fcall);
 
 	result = v9fs_t_stat(v9ses, newfid, &fcall);
 	if (result < 0) {
diff --git a/fs/Kconfig b/fs/Kconfig
index 2524629dc835..f9b5842c8d2d 100644
--- a/fs/Kconfig
+++ b/fs/Kconfig
@@ -842,6 +842,12 @@ config TMPFS
 config HUGETLBFS
 	bool "HugeTLB file system support"
 	depends X86 || IA64 || PPC64 || SPARC64 || SUPERH || BROKEN
+	help
+	  hugetlbfs is a filesystem backing for HugeTLB pages, based on
+	  ramfs. For architectures that support it, say Y here and read
+	  <file:Documentation/vm/hugetlbpage.txt> for details.
+
+	  If unsure, say N.
 
 config HUGETLB_PAGE
 	def_bool HUGETLBFS
diff --git a/fs/Makefile b/fs/Makefile
index 83bf478e786b..078d3d1191a5 100644
--- a/fs/Makefile
+++ b/fs/Makefile
@@ -45,6 +45,7 @@ obj-$(CONFIG_DNOTIFY)		+= dnotify.o
 obj-$(CONFIG_PROC_FS)		+= proc/
 obj-y				+= partitions/
 obj-$(CONFIG_SYSFS)		+= sysfs/
+obj-$(CONFIG_CONFIGFS_FS)	+= configfs/
 obj-y				+= devpts/
 
 obj-$(CONFIG_PROFILING)		+= dcookies.o
@@ -100,5 +101,4 @@ obj-$(CONFIG_BEFS_FS)		+= befs/
 obj-$(CONFIG_HOSTFS)		+= hostfs/
 obj-$(CONFIG_HPPFS)		+= hppfs/
 obj-$(CONFIG_DEBUG_FS)		+= debugfs/
-obj-$(CONFIG_CONFIGFS_FS)	+= configfs/
 obj-$(CONFIG_OCFS2_FS)		+= ocfs2/
diff --git a/fs/affs/namei.c b/fs/affs/namei.c
index d4c2d636c479..a42143ca0169 100644
--- a/fs/affs/namei.c
+++ b/fs/affs/namei.c
@@ -416,10 +416,9 @@ affs_rename(struct inode *old_dir, struct dentry *old_dentry,
 			return retval;
 	}
 
-	retval = -EIO;
 	bh = affs_bread(sb, old_dentry->d_inode->i_ino);
 	if (!bh)
-		goto done;
+		return -EIO;
 
 	/* Remove header from its parent directory. */
 	affs_lock_dir(old_dir);
diff --git a/fs/autofs4/autofs_i.h b/fs/autofs4/autofs_i.h
index 57c4903614e5..d6603d02304c 100644
--- a/fs/autofs4/autofs_i.h
+++ b/fs/autofs4/autofs_i.h
@@ -74,8 +74,8 @@ struct autofs_wait_queue {
 	struct autofs_wait_queue *next;
 	autofs_wqt_t wait_queue_token;
 	/* We use the following to see what we are waiting for */
-	int hash;
-	int len;
+	unsigned int hash;
+	unsigned int len;
 	char *name;
 	u32 dev;
 	u64 ino;
@@ -85,7 +85,6 @@ struct autofs_wait_queue {
 	pid_t tgid;
 	/* This is for status reporting upon return */
 	int status;
-	atomic_t notify;
 	atomic_t wait_ctr;
 };
 
diff --git a/fs/autofs4/root.c b/fs/autofs4/root.c
index 84e030c8ddd0..5100f984783f 100644
--- a/fs/autofs4/root.c
+++ b/fs/autofs4/root.c
@@ -327,6 +327,7 @@ static int try_to_fill_dentry(struct dentry *dentry, int flags)
 static void *autofs4_follow_link(struct dentry *dentry, struct nameidata *nd)
 {
 	struct autofs_sb_info *sbi = autofs4_sbi(dentry->d_sb);
+	struct autofs_info *ino = autofs4_dentry_ino(dentry);
 	int oz_mode = autofs4_oz_mode(sbi);
 	unsigned int lookup_type;
 	int status;
@@ -340,13 +341,8 @@ static void *autofs4_follow_link(struct dentry *dentry, struct nameidata *nd)
 	if (oz_mode || !lookup_type)
 		goto done;
 
-	/*
-	 * If a request is pending wait for it.
-	 * If it's a mount then it won't be expired till at least
-	 * a liitle later and if it's an expire then we might need
-	 * to mount it again.
-	 */
-	if (autofs4_ispending(dentry)) {
+	/* If an expire request is pending wait for it. */
+	if (ino && (ino->flags & AUTOFS_INF_EXPIRING)) {
 		DPRINTK("waiting for active request %p name=%.*s",
 			dentry, dentry->d_name.len, dentry->d_name.name);
 
diff --git a/fs/autofs4/waitq.c b/fs/autofs4/waitq.c
index 142ab6aa2aa1..ce103e7b0bc3 100644
--- a/fs/autofs4/waitq.c
+++ b/fs/autofs4/waitq.c
@@ -189,14 +189,30 @@ static int autofs4_getpath(struct autofs_sb_info *sbi,
 	return len;
 }
 
+static struct autofs_wait_queue *
+autofs4_find_wait(struct autofs_sb_info *sbi,
+		  char *name, unsigned int hash, unsigned int len)
+{
+	struct autofs_wait_queue *wq;
+
+	for (wq = sbi->queues; wq; wq = wq->next) {
+		if (wq->hash == hash &&
+		    wq->len == len &&
+		    wq->name && !memcmp(wq->name, name, len))
+			break;
+	}
+	return wq;
+}
+
 int autofs4_wait(struct autofs_sb_info *sbi, struct dentry *dentry,
 		enum autofs_notify notify)
 {
+	struct autofs_info *ino;
 	struct autofs_wait_queue *wq;
 	char *name;
 	unsigned int len = 0;
 	unsigned int hash = 0;
-	int status;
+	int status, type;
 
 	/* In catatonic mode, we don't wait for nobody */
 	if (sbi->catatonic)
@@ -223,21 +239,41 @@ int autofs4_wait(struct autofs_sb_info *sbi, struct dentry *dentry,
 		return -EINTR;
 	}
 
-	for (wq = sbi->queues ; wq ; wq = wq->next) {
-		if (wq->hash == dentry->d_name.hash &&
-		    wq->len == len &&
-		    wq->name && !memcmp(wq->name, name, len))
-			break;
-	}
+	wq = autofs4_find_wait(sbi, name, hash, len);
+	ino = autofs4_dentry_ino(dentry);
+	if (!wq && ino && notify == NFY_NONE) {
+		/*
+		 * Either we've betean the pending expire to post it's
+		 * wait or it finished while we waited on the mutex.
+		 * So we need to wait till either, the wait appears
+		 * or the expire finishes.
+		 */
+
+		while (ino->flags & AUTOFS_INF_EXPIRING) {
+			mutex_unlock(&sbi->wq_mutex);
+			schedule_timeout_interruptible(HZ/10);
+			if (mutex_lock_interruptible(&sbi->wq_mutex)) {
+				kfree(name);
+				return -EINTR;
+			}
+			wq = autofs4_find_wait(sbi, name, hash, len);
+			if (wq)
+				break;
+		}
 
-	if (!wq) {
-		/* Can't wait for an expire if there's no mount */
-		if (notify == NFY_NONE && !d_mountpoint(dentry)) {
+		/*
+		 * Not ideal but the status has already gone. Of the two
+		 * cases where we wait on NFY_NONE neither depend on the
+		 * return status of the wait.
+		 */
+		if (!wq) {
 			kfree(name);
 			mutex_unlock(&sbi->wq_mutex);
-			return -ENOENT;
+			return 0;
 		}
+	}
 
+	if (!wq) {
 		/* Create a new wait queue */
 		wq = kmalloc(sizeof(struct autofs_wait_queue),GFP_KERNEL);
 		if (!wq) {
@@ -263,20 +299,7 @@ int autofs4_wait(struct autofs_sb_info *sbi, struct dentry *dentry,
 		wq->tgid = current->tgid;
 		wq->status = -EINTR; /* Status return if interrupted */
 		atomic_set(&wq->wait_ctr, 2);
-		atomic_set(&wq->notify, 1);
-		mutex_unlock(&sbi->wq_mutex);
-	} else {
-		atomic_inc(&wq->wait_ctr);
 		mutex_unlock(&sbi->wq_mutex);
-		kfree(name);
-		DPRINTK("existing wait id = 0x%08lx, name = %.*s, nfy=%d",
-			(unsigned long) wq->wait_queue_token, wq->len, wq->name, notify);
-	}
-
-	if (notify != NFY_NONE && atomic_read(&wq->notify)) {
-		int type;
-
-		atomic_dec(&wq->notify);
 
 		if (sbi->version < 5) {
 			if (notify == NFY_MOUNT)
@@ -299,6 +322,12 @@ int autofs4_wait(struct autofs_sb_info *sbi, struct dentry *dentry,
 
 		/* autofs4_notify_daemon() may block */
 		autofs4_notify_daemon(sbi, wq, type);
+	} else {
+		atomic_inc(&wq->wait_ctr);
+		mutex_unlock(&sbi->wq_mutex);
+		kfree(name);
+		DPRINTK("existing wait id = 0x%08lx, name = %.*s, nfy=%d",
+			(unsigned long) wq->wait_queue_token, wq->len, wq->name, notify);
 	}
 
 	/* wq->name is NULL if and only if the lock is already released */
diff --git a/fs/binfmt_flat.c b/fs/binfmt_flat.c
index 69f44dcdb0b4..b1c902e319c1 100644
--- a/fs/binfmt_flat.c
+++ b/fs/binfmt_flat.c
@@ -428,7 +428,6 @@ static int load_flat_file(struct linux_binprm * bprm,
 	loff_t fpos;
 	unsigned long start_code, end_code;
 	int ret;
-	int exec_fileno;
 
 	hdr = ((struct flat_hdr *) bprm->buf);		/* exec-header */
 	inode = bprm->file->f_dentry->d_inode;
@@ -502,21 +501,12 @@ static int load_flat_file(struct linux_binprm * bprm,
 		goto err;
 	}
 
-	/* check file descriptor */
-	exec_fileno = get_unused_fd();
-	if (exec_fileno < 0) {
-		ret = -EMFILE;
-		goto err;
-	}
-	get_file(bprm->file);
-	fd_install(exec_fileno, bprm->file);
-
 	/* Flush all traces of the currently running executable */
 	if (id == 0) {
 		result = flush_old_exec(bprm);
 		if (result) {
 			ret = result;
-			goto err_close;
+			goto err;
 		}
 
 		/* OK, This is the point of no return */
@@ -548,7 +538,7 @@ static int load_flat_file(struct linux_binprm * bprm,
 				textpos = (unsigned long) -ENOMEM;
 			printk("Unable to mmap process text, errno %d\n", (int)-textpos);
 			ret = textpos;
-			goto err_close;
+			goto err;
 		}
 
 		down_write(&current->mm->mmap_sem);
@@ -564,7 +554,7 @@ static int load_flat_file(struct linux_binprm * bprm,
 					(int)-datapos);
 			do_munmap(current->mm, textpos, text_len);
 			ret = realdatastart;
-			goto err_close;
+			goto err;
 		}
 		datapos = realdatastart + MAX_SHARED_LIBS * sizeof(unsigned long);
 
@@ -587,7 +577,7 @@ static int load_flat_file(struct linux_binprm * bprm,
 			do_munmap(current->mm, textpos, text_len);
 			do_munmap(current->mm, realdatastart, data_len + extra);
 			ret = result;
-			goto err_close;
+			goto err;
 		}
 
 		reloc = (unsigned long *) (datapos+(ntohl(hdr->reloc_start)-text_len));
@@ -606,7 +596,7 @@ static int load_flat_file(struct linux_binprm * bprm,
 			printk("Unable to allocate RAM for process text/data, errno %d\n",
 					(int)-textpos);
 			ret = textpos;
-			goto err_close;
+			goto err;
 		}
 
 		realdatastart = textpos + ntohl(hdr->data_start);
@@ -652,7 +642,7 @@ static int load_flat_file(struct linux_binprm * bprm,
 			do_munmap(current->mm, textpos, text_len + data_len + extra +
 				MAX_SHARED_LIBS * sizeof(unsigned long));
 			ret = result;
-			goto err_close;
+			goto err;
 		}
 	}
 
@@ -717,7 +707,7 @@ static int load_flat_file(struct linux_binprm * bprm,
 				addr = calc_reloc(*rp, libinfo, id, 0);
 				if (addr == RELOC_FAILED) {
 					ret = -ENOEXEC;
-					goto err_close;
+					goto err;
 				}
 				*rp = addr;
 			}
@@ -747,7 +737,7 @@ static int load_flat_file(struct linux_binprm * bprm,
 			rp = (unsigned long *) calc_reloc(addr, libinfo, id, 1);
 			if (rp == (unsigned long *)RELOC_FAILED) {
 				ret = -ENOEXEC;
-				goto err_close;
+				goto err;
 			}
 
 			/* Get the pointer's value.  */
@@ -762,7 +752,7 @@ static int load_flat_file(struct linux_binprm * bprm,
 				addr = calc_reloc(addr, libinfo, id, 0);
 				if (addr == RELOC_FAILED) {
 					ret = -ENOEXEC;
-					goto err_close;
+					goto err;
 				}
 
 				/* Write back the relocated pointer.  */
@@ -783,8 +773,6 @@ static int load_flat_file(struct linux_binprm * bprm,
 			stack_len);
 
 	return 0;
-err_close:
-	sys_close(exec_fileno);
 err:
 	return ret;
 }
diff --git a/fs/bio.c b/fs/bio.c
index eb8fbc53f2cd..098c12b2d60a 100644
--- a/fs/bio.c
+++ b/fs/bio.c
@@ -1116,6 +1116,9 @@ struct bio_pair *bio_split(struct bio *bi, mempool_t *pool, int first_sectors)
 	bp->bio1.bi_io_vec = &bp->bv1;
 	bp->bio2.bi_io_vec = &bp->bv2;
 
+	bp->bio1.bi_max_vecs = 1;
+	bp->bio2.bi_max_vecs = 1;
+
 	bp->bio1.bi_end_io = bio_pair_end_1;
 	bp->bio2.bi_end_io = bio_pair_end_2;
 
diff --git a/fs/block_dev.c b/fs/block_dev.c
index af88c43043d5..f5958f413bd1 100644
--- a/fs/block_dev.c
+++ b/fs/block_dev.c
@@ -1104,6 +1104,8 @@ const struct file_operations def_blk_fops = {
 	.readv		= generic_file_readv,
 	.writev		= generic_file_write_nolock,
 	.sendfile	= generic_file_sendfile,
+	.splice_read	= generic_file_splice_read,
+	.splice_write	= generic_file_splice_write,
 };
 
 int ioctl_by_bdev(struct block_device *bdev, unsigned cmd, unsigned long arg)
diff --git a/fs/cifs/CHANGES b/fs/cifs/CHANGES
index 8a2de038882e..7271bb0257f6 100644
--- a/fs/cifs/CHANGES
+++ b/fs/cifs/CHANGES
@@ -1,7 +1,18 @@
+Version 1.43
+------------
+POSIX locking to servers which support CIFS POSIX Extensions
+(disabled by default controlled by proc/fs/cifs/Experimental).
+Handle conversion of long share names (especially Asian languages)
+to Unicode during mount. 
+
 Version 1.42
 ------------
 Fix slow oplock break when mounted to different servers at the same time and
-the tids match and we try to find matching fid on wrong server.
+the tids match and we try to find matching fid on wrong server. Fix read
+looping when signing required by server (2.6.16 kernel only). Fix readdir
+vs. rename race which could cause each to hang. Return . and .. even
+if server does not.  Allow searches to skip first three entries and
+begin at any location. Fix oops in find_writeable_file.
 
 Version 1.41
 ------------
diff --git a/fs/cifs/README b/fs/cifs/README
index b2b4d0803761..0355003f4f0a 100644
--- a/fs/cifs/README
+++ b/fs/cifs/README
@@ -511,6 +511,14 @@ LinuxExtensionsEnabled	If set to one then the client will attempt to
 			support and want to map the uid and gid fields 
 			to values supplied at mount (rather than the 
 			actual values, then set this to zero. (default 1)
+Experimental            When set to 1 used to enable certain experimental
+			features (currently enables multipage writes
+			when signing is enabled, the multipage write
+			performance enhancement was disabled when
+			signing turned on in case buffer was modified
+			just before it was sent, also this flag will
+			be used to use the new experimental sessionsetup
+			code).
 
 These experimental features and tracing can be enabled by changing flags in 
 /proc/fs/cifs (after the cifs module has been installed or built into the 
diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c
index d4b713e5affb..c262d8874ce9 100644
--- a/fs/cifs/cifsfs.c
+++ b/fs/cifs/cifsfs.c
@@ -33,6 +33,7 @@
 #include <linux/vfs.h>
 #include <linux/mempool.h>
 #include <linux/delay.h>
+#include <linux/kthread.h>
 #include "cifsfs.h"
 #include "cifspdu.h"
 #define DECLARE_GLOBALS_HERE
@@ -75,9 +76,6 @@ unsigned int cifs_max_pending = CIFS_MAX_REQ;
 module_param(cifs_max_pending, int, 0);
 MODULE_PARM_DESC(cifs_max_pending,"Simultaneous requests to server. Default: 50 Range: 2 to 256");
 
-static DECLARE_COMPLETION(cifs_oplock_exited);
-static DECLARE_COMPLETION(cifs_dnotify_exited);
-
 extern mempool_t *cifs_sm_req_poolp;
 extern mempool_t *cifs_req_poolp;
 extern mempool_t *cifs_mid_poolp;
@@ -841,10 +839,6 @@ static int cifs_oplock_thread(void * dummyarg)
 	__u16  netfid;
 	int rc;
 
-	daemonize("cifsoplockd");
-	allow_signal(SIGTERM);
-
-	oplockThread = current;
 	do {
 		if (try_to_freeze()) 
 			continue;
@@ -900,9 +894,9 @@ static int cifs_oplock_thread(void * dummyarg)
 			set_current_state(TASK_INTERRUPTIBLE);
 			schedule_timeout(1);  /* yield in case q were corrupt */
 		}
-	} while(!signal_pending(current));
-	oplockThread = NULL;
-	complete_and_exit (&cifs_oplock_exited, 0);
+	} while (!kthread_should_stop());
+
+	return 0;
 }
 
 static int cifs_dnotify_thread(void * dummyarg)
@@ -910,10 +904,6 @@ static int cifs_dnotify_thread(void * dummyarg)
 	struct list_head *tmp;
 	struct cifsSesInfo *ses;
 
-	daemonize("cifsdnotifyd");
-	allow_signal(SIGTERM);
-
-	dnotifyThread = current;
 	do {
 		if(try_to_freeze())
 			continue;
@@ -931,8 +921,9 @@ static int cifs_dnotify_thread(void * dummyarg)
 				wake_up_all(&ses->server->response_q);
 		}
 		read_unlock(&GlobalSMBSeslock);
-	} while(!signal_pending(current));
-	complete_and_exit (&cifs_dnotify_exited, 0);
+	} while (!kthread_should_stop());
+
+	return 0;
 }
 
 static int __init
@@ -982,32 +973,48 @@ init_cifs(void)
 	}
 
 	rc = cifs_init_inodecache();
-	if (!rc) {
-		rc = cifs_init_mids();
-		if (!rc) {
-			rc = cifs_init_request_bufs();
-			if (!rc) {
-				rc = register_filesystem(&cifs_fs_type);
-				if (!rc) {                
-					rc = (int)kernel_thread(cifs_oplock_thread, NULL, 
-						CLONE_FS | CLONE_FILES | CLONE_VM);
-					if(rc > 0) {
-						rc = (int)kernel_thread(cifs_dnotify_thread, NULL,
-							CLONE_FS | CLONE_FILES | CLONE_VM);
-						if(rc > 0)
-							return 0;
-						else
-							cERROR(1,("error %d create dnotify thread", rc));
-					} else {
-						cERROR(1,("error %d create oplock thread",rc));
-					}
-				}
-				cifs_destroy_request_bufs();
-			}
-			cifs_destroy_mids();
-		}
-		cifs_destroy_inodecache();
+	if (rc)
+		goto out_clean_proc;
+
+	rc = cifs_init_mids();
+	if (rc)
+		goto out_destroy_inodecache;
+
+	rc = cifs_init_request_bufs();
+	if (rc)
+		goto out_destroy_mids;
+
+	rc = register_filesystem(&cifs_fs_type);
+	if (rc)
+		goto out_destroy_request_bufs;
+
+	oplockThread = kthread_run(cifs_oplock_thread, NULL, "cifsoplockd");
+	if (IS_ERR(oplockThread)) {
+		rc = PTR_ERR(oplockThread);
+		cERROR(1,("error %d create oplock thread", rc));
+		goto out_unregister_filesystem;
 	}
+
+	dnotifyThread = kthread_run(cifs_dnotify_thread, NULL, "cifsdnotifyd");
+	if (IS_ERR(dnotifyThread)) {
+		rc = PTR_ERR(dnotifyThread);
+		cERROR(1,("error %d create dnotify thread", rc));
+		goto out_stop_oplock_thread;
+	}
+
+	return 0;
+
+ out_stop_oplock_thread:
+	kthread_stop(oplockThread);
+ out_unregister_filesystem:
+	unregister_filesystem(&cifs_fs_type);
+ out_destroy_request_bufs:
+	cifs_destroy_request_bufs();
+ out_destroy_mids:
+	cifs_destroy_mids();
+ out_destroy_inodecache:
+	cifs_destroy_inodecache();
+ out_clean_proc:
 #ifdef CONFIG_PROC_FS
 	cifs_proc_clean();
 #endif
@@ -1025,14 +1032,8 @@ exit_cifs(void)
 	cifs_destroy_inodecache();
 	cifs_destroy_mids();
 	cifs_destroy_request_bufs();
-	if(oplockThread) {
-		send_sig(SIGTERM, oplockThread, 1);
-		wait_for_completion(&cifs_oplock_exited);
-	}
-	if(dnotifyThread) {
-		send_sig(SIGTERM, dnotifyThread, 1);
-		wait_for_completion(&cifs_dnotify_exited);
-	}
+	kthread_stop(oplockThread);
+	kthread_stop(dnotifyThread);
 }
 
 MODULE_AUTHOR("Steve French <sfrench@us.ibm.com>");
diff --git a/fs/cifs/cifsfs.h b/fs/cifs/cifsfs.h
index 4e829dc672a6..c98755dca868 100644
--- a/fs/cifs/cifsfs.h
+++ b/fs/cifs/cifsfs.h
@@ -99,5 +99,5 @@ extern ssize_t	cifs_getxattr(struct dentry *, const char *, void *, size_t);
 extern ssize_t	cifs_listxattr(struct dentry *, char *, size_t);
 extern int cifs_ioctl (struct inode * inode, struct file * filep,
 		       unsigned int command, unsigned long arg);
-#define CIFS_VERSION   "1.42"
+#define CIFS_VERSION   "1.43"
 #endif				/* _CIFSFS_H */
diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h
index 2879ba343ca7..310ea2f0e0bf 100644
--- a/fs/cifs/cifsproto.h
+++ b/fs/cifs/cifsproto.h
@@ -267,7 +267,7 @@ extern int CIFSSMBLock(const int xid, struct cifsTconInfo *tcon,
 			const int waitFlag);
 extern int CIFSSMBPosixLock(const int xid, struct cifsTconInfo *tcon,
 			const __u16 smb_file_id, const int get_flag,
-			const __u64 len, const __u64 offset, 
+			const __u64 len, struct file_lock *, 
 			const __u16 lock_type, const int waitFlag);
 extern int CIFSSMBTDis(const int xid, struct cifsTconInfo *tcon);
 extern int CIFSSMBLogoff(const int xid, struct cifsSesInfo *ses);
diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c
index d705500aa283..925881e00ff2 100644
--- a/fs/cifs/cifssmb.c
+++ b/fs/cifs/cifssmb.c
@@ -1355,7 +1355,8 @@ CIFSSMBLock(const int xid, struct cifsTconInfo *tcon,
 int
 CIFSSMBPosixLock(const int xid, struct cifsTconInfo *tcon,
 		const __u16 smb_file_id, const int get_flag, const __u64 len,
-		const __u64 lkoffset, const __u16 lock_type, const int waitFlag)
+		struct file_lock *pLockData, const __u16 lock_type, 
+		const int waitFlag)
 {
 	struct smb_com_transaction2_sfi_req *pSMB  = NULL;
 	struct smb_com_transaction2_sfi_rsp *pSMBr = NULL;
@@ -1366,6 +1367,10 @@ CIFSSMBPosixLock(const int xid, struct cifsTconInfo *tcon,
 	__u16 params, param_offset, offset, byte_count, count;
 
 	cFYI(1, ("Posix Lock"));
+
+	if(pLockData == NULL)
+		return EINVAL;
+
 	rc = small_smb_init(SMB_COM_TRANSACTION2, 15, tcon, (void **) &pSMB);
 
 	if (rc)
@@ -1404,10 +1409,10 @@ CIFSSMBPosixLock(const int xid, struct cifsTconInfo *tcon,
 
 	parm_data->lock_type = cpu_to_le16(lock_type);
 	if(waitFlag)
-		parm_data->lock_flags = 1;
+		parm_data->lock_flags = cpu_to_le16(1);
 	parm_data->pid = cpu_to_le32(current->tgid);
-	parm_data->start = lkoffset;
-	parm_data->length = len;  /* normalize negative numbers */
+	parm_data->start = cpu_to_le64(pLockData->fl_start);
+	parm_data->length = cpu_to_le64(len);  /* normalize negative numbers */
 
 	pSMB->DataOffset = cpu_to_le16(offset);
 	pSMB->Fid = smb_file_id;
@@ -1419,8 +1424,33 @@ CIFSSMBPosixLock(const int xid, struct cifsTconInfo *tcon,
 			(struct smb_hdr *) pSMBr, &bytes_returned, 0);
 	if (rc) {
 		cFYI(1, ("Send error in Posix Lock = %d", rc));
-	}
+	} else if (get_flag) {
+		/* lock structure can be returned on get */
+		__u16 data_offset;
+		__u16 data_count;
+		rc = validate_t2((struct smb_t2_rsp *)pSMBr);
 
+		if (rc || (pSMBr->ByteCount < sizeof(struct cifs_posix_lock))) {
+			rc = -EIO;      /* bad smb */
+			goto plk_err_exit;
+		}
+		if(pLockData == NULL) {
+			rc = -EINVAL;
+			goto plk_err_exit;
+		}
+		data_offset = le16_to_cpu(pSMBr->t2.DataOffset);
+		data_count  = le16_to_cpu(pSMBr->t2.DataCount);
+		if(data_count < sizeof(struct cifs_posix_lock)) {
+			rc = -EIO;
+			goto plk_err_exit;
+		}
+		parm_data = (struct cifs_posix_lock *)
+			((char *)&pSMBr->hdr.Protocol + data_offset);
+		if(parm_data->lock_type == cpu_to_le16(CIFS_UNLCK))
+			pLockData->fl_type = F_UNLCK;
+	}
+ 
+plk_err_exit:
 	if (pSMB)
 		cifs_small_buf_release(pSMB);
 
@@ -3119,7 +3149,7 @@ findFirstRetry:
 				psrch_inf->endOfSearch = FALSE;
 
 			psrch_inf->entries_in_buffer  = le16_to_cpu(parms->SearchCount);
-			psrch_inf->index_of_last_entry = 
+			psrch_inf->index_of_last_entry = 2 /* skip . and .. */ +
 				psrch_inf->entries_in_buffer;
 			*pnetfid = parms->SearchHandle;
 		} else {
diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index 0b86d5ca9014..bae1479318d1 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -2148,6 +2148,8 @@ CIFSSessSetup(unsigned int xid, struct cifsSesInfo *ses,
 /* We look for obvious messed up bcc or strings in response so we do not go off
    the end since (at least) WIN2K and Windows XP have a major bug in not null
    terminating last Unicode string in response  */
+				if(ses->serverOS)
+					kfree(ses->serverOS);
 				ses->serverOS = kzalloc(2 * (len + 1), GFP_KERNEL);
 				if(ses->serverOS == NULL)
 					goto sesssetup_nomem;
@@ -2160,6 +2162,8 @@ CIFSSessSetup(unsigned int xid, struct cifsSesInfo *ses,
 				if (remaining_words > 0) {
 					len = UniStrnlen((wchar_t *)bcc_ptr,
 							 remaining_words-1);
+					if(ses->serverNOS)
+						kfree(ses->serverNOS);
 					ses->serverNOS = kzalloc(2 * (len + 1),GFP_KERNEL);
 					if(ses->serverNOS == NULL)
 						goto sesssetup_nomem;
@@ -2177,6 +2181,8 @@ CIFSSessSetup(unsigned int xid, struct cifsSesInfo *ses,
 					if (remaining_words > 0) {
 						len = UniStrnlen((wchar_t *) bcc_ptr, remaining_words);
           /* last string is not always null terminated (for e.g. for Windows XP & 2000) */
+						if(ses->serverDomain)
+							kfree(ses->serverDomain);
 						ses->serverDomain =
 						    kzalloc(2*(len+1),GFP_KERNEL);
 						if(ses->serverDomain == NULL)
@@ -2187,15 +2193,22 @@ CIFSSessSetup(unsigned int xid, struct cifsSesInfo *ses,
 						ses->serverDomain[2*len] = 0;
 						ses->serverDomain[1+(2*len)] = 0;
 					} /* else no more room so create dummy domain string */
-					else
+					else {
+						if(ses->serverDomain)
+							kfree(ses->serverDomain);
 						ses->serverDomain = 
 							kzalloc(2, GFP_KERNEL);
+					}
 				} else {	/* no room so create dummy domain and NOS string */
 					/* if these kcallocs fail not much we
 					   can do, but better to not fail the
 					   sesssetup itself */
+					if(ses->serverDomain)
+						kfree(ses->serverDomain);
 					ses->serverDomain =
 					    kzalloc(2, GFP_KERNEL);
+					if(ses->serverNOS)
+						kfree(ses->serverNOS);
 					ses->serverNOS =
 					    kzalloc(2, GFP_KERNEL);
 				}
@@ -2204,6 +2217,8 @@ CIFSSessSetup(unsigned int xid, struct cifsSesInfo *ses,
 				if (((long) bcc_ptr + len) - (long)
 				    pByteArea(smb_buffer_response)
 					    <= BCC(smb_buffer_response)) {
+					if(ses->serverOS)
+						kfree(ses->serverOS);
 					ses->serverOS = kzalloc(len + 1,GFP_KERNEL);
 					if(ses->serverOS == NULL)
 						goto sesssetup_nomem;
@@ -2214,6 +2229,8 @@ CIFSSessSetup(unsigned int xid, struct cifsSesInfo *ses,
 					bcc_ptr++;
 
 					len = strnlen(bcc_ptr, 1024);
+					if(ses->serverNOS)
+						kfree(ses->serverNOS);
 					ses->serverNOS = kzalloc(len + 1,GFP_KERNEL);
 					if(ses->serverNOS == NULL)
 						goto sesssetup_nomem;
@@ -2223,6 +2240,8 @@ CIFSSessSetup(unsigned int xid, struct cifsSesInfo *ses,
 					bcc_ptr++;
 
 					len = strnlen(bcc_ptr, 1024);
+					if(ses->serverDomain)
+						kfree(ses->serverDomain);
 					ses->serverDomain = kzalloc(len + 1,GFP_KERNEL);
 					if(ses->serverDomain == NULL)
 						goto sesssetup_nomem;
@@ -2427,6 +2446,8 @@ CIFSSpnegoSessSetup(unsigned int xid, struct cifsSesInfo *ses,
 /* We look for obvious messed up bcc or strings in response so we do not go off
    the end since (at least) WIN2K and Windows XP have a major bug in not null
    terminating last Unicode string in response  */
+					if(ses->serverOS)
+						kfree(ses->serverOS);
 					ses->serverOS =
 					    kzalloc(2 * (len + 1), GFP_KERNEL);
 					cifs_strfromUCS_le(ses->serverOS,
@@ -2441,6 +2462,8 @@ CIFSSpnegoSessSetup(unsigned int xid, struct cifsSesInfo *ses,
 						len = UniStrnlen((wchar_t *)bcc_ptr,
 								 remaining_words
 								 - 1);
+						if(ses->serverNOS)
+							kfree(ses->serverNOS);
 						ses->serverNOS =
 						    kzalloc(2 * (len + 1),
 							    GFP_KERNEL);
@@ -2454,7 +2477,9 @@ CIFSSpnegoSessSetup(unsigned int xid, struct cifsSesInfo *ses,
 						remaining_words -= len + 1;
 						if (remaining_words > 0) {
 							len = UniStrnlen((wchar_t *) bcc_ptr, remaining_words);	
-                            /* last string is not always null terminated (for e.g. for Windows XP & 2000) */
+                     /* last string not null terminated (e.g.Windows XP/2000) */
+							if(ses->serverDomain)
+								kfree(ses->serverDomain);
 							ses->serverDomain = kzalloc(2*(len+1),GFP_KERNEL);
 							cifs_strfromUCS_le(ses->serverDomain,
 							     (__le16 *)bcc_ptr, 
@@ -2463,11 +2488,18 @@ CIFSSpnegoSessSetup(unsigned int xid, struct cifsSesInfo *ses,
 							ses->serverDomain[2*len] = 0;
 							ses->serverDomain[1+(2*len)] = 0;
 						} /* else no more room so create dummy domain string */
-						else
+						else {
+							if(ses->serverDomain)
+								kfree(ses->serverDomain);
 							ses->serverDomain =
 							    kzalloc(2,GFP_KERNEL);
-					} else {	/* no room so create dummy domain and NOS string */
+						}
+					} else {/* no room use dummy domain&NOS */
+						if(ses->serverDomain)
+							kfree(ses->serverDomain);
 						ses->serverDomain = kzalloc(2, GFP_KERNEL);
+						if(ses->serverNOS)
+							kfree(ses->serverNOS);
 						ses->serverNOS = kzalloc(2, GFP_KERNEL);
 					}
 				} else {	/* ASCII */
@@ -2476,6 +2508,8 @@ CIFSSpnegoSessSetup(unsigned int xid, struct cifsSesInfo *ses,
 					if (((long) bcc_ptr + len) - (long)
 					    pByteArea(smb_buffer_response)
 					    <= BCC(smb_buffer_response)) {
+						if(ses->serverOS)
+							kfree(ses->serverOS);
 						ses->serverOS = kzalloc(len + 1, GFP_KERNEL);
 						strncpy(ses->serverOS, bcc_ptr, len);
 
@@ -2484,6 +2518,8 @@ CIFSSpnegoSessSetup(unsigned int xid, struct cifsSesInfo *ses,
 						bcc_ptr++;
 
 						len = strnlen(bcc_ptr, 1024);
+						if(ses->serverNOS)
+							kfree(ses->serverNOS);
 						ses->serverNOS = kzalloc(len + 1,GFP_KERNEL);
 						strncpy(ses->serverNOS, bcc_ptr, len);
 						bcc_ptr += len;
@@ -2491,6 +2527,8 @@ CIFSSpnegoSessSetup(unsigned int xid, struct cifsSesInfo *ses,
 						bcc_ptr++;
 
 						len = strnlen(bcc_ptr, 1024);
+						if(ses->serverDomain)
+							kfree(ses->serverDomain);
 						ses->serverDomain = kzalloc(len + 1, GFP_KERNEL);
 						strncpy(ses->serverDomain, bcc_ptr, len);
 						bcc_ptr += len;
@@ -2728,6 +2766,8 @@ CIFSNTLMSSPNegotiateSessSetup(unsigned int xid,
 /* We look for obvious messed up bcc or strings in response so we do not go off
    the end since (at least) WIN2K and Windows XP have a major bug in not null
    terminating last Unicode string in response  */
+					if(ses->serverOS)
+						kfree(ses->serverOS);
 					ses->serverOS =
 					    kzalloc(2 * (len + 1), GFP_KERNEL);
 					cifs_strfromUCS_le(ses->serverOS,
@@ -2743,6 +2783,8 @@ CIFSNTLMSSPNegotiateSessSetup(unsigned int xid,
 								 bcc_ptr,
 								 remaining_words
 								 - 1);
+						if(ses->serverNOS)
+							kfree(ses->serverNOS);
 						ses->serverNOS =
 						    kzalloc(2 * (len + 1),
 							    GFP_KERNEL);
@@ -2760,6 +2802,8 @@ CIFSNTLMSSPNegotiateSessSetup(unsigned int xid,
 						if (remaining_words > 0) {
 							len = UniStrnlen((wchar_t *) bcc_ptr, remaining_words);	
            /* last string is not always null terminated (for e.g. for Windows XP & 2000) */
+							if(ses->serverDomain)
+								kfree(ses->serverDomain);
 							ses->serverDomain =
 							    kzalloc(2 *
 								    (len +
@@ -2777,13 +2821,20 @@ CIFSNTLMSSPNegotiateSessSetup(unsigned int xid,
 								[1 + (2 * len)]
 							    = 0;
 						} /* else no more room so create dummy domain string */
-						else
+						else {
+							if(ses->serverDomain)
+								kfree(ses->serverDomain);
 							ses->serverDomain =
 							    kzalloc(2,
 								    GFP_KERNEL);
+						}
 					} else {	/* no room so create dummy domain and NOS string */
+						if(ses->serverDomain);
+							kfree(ses->serverDomain);
 						ses->serverDomain =
 						    kzalloc(2, GFP_KERNEL);
+						if(ses->serverNOS)
+							kfree(ses->serverNOS);
 						ses->serverNOS =
 						    kzalloc(2, GFP_KERNEL);
 					}
@@ -2792,6 +2843,8 @@ CIFSNTLMSSPNegotiateSessSetup(unsigned int xid,
 					if (((long) bcc_ptr + len) - (long)
 					    pByteArea(smb_buffer_response)
 					    <= BCC(smb_buffer_response)) {
+						if(ses->serverOS)
+							kfree(ses->serverOS);
 						ses->serverOS =
 						    kzalloc(len + 1,
 							    GFP_KERNEL);
@@ -2803,6 +2856,8 @@ CIFSNTLMSSPNegotiateSessSetup(unsigned int xid,
 						bcc_ptr++;
 
 						len = strnlen(bcc_ptr, 1024);
+						if(ses->serverNOS)
+							kfree(ses->serverNOS);
 						ses->serverNOS =
 						    kzalloc(len + 1,
 							    GFP_KERNEL);
@@ -2812,6 +2867,8 @@ CIFSNTLMSSPNegotiateSessSetup(unsigned int xid,
 						bcc_ptr++;
 
 						len = strnlen(bcc_ptr, 1024);
+						if(ses->serverDomain)
+							kfree(ses->serverDomain);
 						ses->serverDomain =
 						    kzalloc(len + 1,
 							    GFP_KERNEL);
@@ -3116,6 +3173,8 @@ CIFSNTLMSSPAuthSessSetup(unsigned int xid, struct cifsSesInfo *ses,
 /* We look for obvious messed up bcc or strings in response so we do not go off
   the end since (at least) WIN2K and Windows XP have a major bug in not null
   terminating last Unicode string in response  */
+					if(ses->serverOS)
+						kfree(ses->serverOS);
 					ses->serverOS =
 					    kzalloc(2 * (len + 1), GFP_KERNEL);
 					cifs_strfromUCS_le(ses->serverOS,
@@ -3131,6 +3190,8 @@ CIFSNTLMSSPAuthSessSetup(unsigned int xid, struct cifsSesInfo *ses,
 								 bcc_ptr,
 								 remaining_words
 								 - 1);
+						if(ses->serverNOS)
+							kfree(ses->serverNOS);
 						ses->serverNOS =
 						    kzalloc(2 * (len + 1),
 							    GFP_KERNEL);
@@ -3147,6 +3208,8 @@ CIFSNTLMSSPAuthSessSetup(unsigned int xid, struct cifsSesInfo *ses,
 						if (remaining_words > 0) {
 							len = UniStrnlen((wchar_t *) bcc_ptr, remaining_words);	
      /* last string not always null terminated (e.g. for Windows XP & 2000) */
+							if(ses->serverDomain)
+								kfree(ses->serverDomain);
 							ses->serverDomain =
 							    kzalloc(2 *
 								    (len +
@@ -3172,10 +3235,17 @@ CIFSNTLMSSPAuthSessSetup(unsigned int xid, struct cifsSesInfo *ses,
 									  len)]
 							    = 0;
 						} /* else no more room so create dummy domain string */
-						else
+						else {
+							if(ses->serverDomain)
+								kfree(ses->serverDomain);
 							ses->serverDomain = kzalloc(2,GFP_KERNEL);
+						}
 					} else {  /* no room so create dummy domain and NOS string */
+						if(ses->serverDomain)
+							kfree(ses->serverDomain);
 						ses->serverDomain = kzalloc(2, GFP_KERNEL);
+						if(ses->serverNOS)
+							kfree(ses->serverNOS);
 						ses->serverNOS = kzalloc(2, GFP_KERNEL);
 					}
 				} else {	/* ASCII */
@@ -3183,6 +3253,8 @@ CIFSNTLMSSPAuthSessSetup(unsigned int xid, struct cifsSesInfo *ses,
 					if (((long) bcc_ptr + len) - 
                         (long) pByteArea(smb_buffer_response) 
                             <= BCC(smb_buffer_response)) {
+						if(ses->serverOS)
+							kfree(ses->serverOS);
 						ses->serverOS = kzalloc(len + 1,GFP_KERNEL);
 						strncpy(ses->serverOS,bcc_ptr, len);
 
@@ -3191,6 +3263,8 @@ CIFSNTLMSSPAuthSessSetup(unsigned int xid, struct cifsSesInfo *ses,
 						bcc_ptr++;
 
 						len = strnlen(bcc_ptr, 1024);
+						if(ses->serverNOS)
+							kfree(ses->serverNOS);
 						ses->serverNOS = kzalloc(len+1,GFP_KERNEL);
 						strncpy(ses->serverNOS, bcc_ptr, len);	
 						bcc_ptr += len;
@@ -3198,6 +3272,8 @@ CIFSNTLMSSPAuthSessSetup(unsigned int xid, struct cifsSesInfo *ses,
 						bcc_ptr++;
 
 						len = strnlen(bcc_ptr, 1024);
+						if(ses->serverDomain)
+							kfree(ses->serverDomain);
 						ses->serverDomain = kzalloc(len+1,GFP_KERNEL);
 						strncpy(ses->serverDomain, bcc_ptr, len);
 						bcc_ptr += len;
@@ -3282,7 +3358,8 @@ CIFSTCon(unsigned int xid, struct cifsSesInfo *ses,
 		bcc_ptr++; /* align */
 	}
 
-	if(ses->server->secMode & (SECMODE_SIGN_REQUIRED | SECMODE_SIGN_ENABLED))
+	if(ses->server->secMode & 
+			(SECMODE_SIGN_REQUIRED | SECMODE_SIGN_ENABLED))
 		smb_buffer->Flags2 |= SMBFLG2_SECURITY_SIGNATURE;
 
 	if (ses->capabilities & CAP_STATUS32) {
@@ -3294,8 +3371,10 @@ CIFSTCon(unsigned int xid, struct cifsSesInfo *ses,
 	if (ses->capabilities & CAP_UNICODE) {
 		smb_buffer->Flags2 |= SMBFLG2_UNICODE;
 		length =
-		    cifs_strtoUCS((__le16 *) bcc_ptr, tree, 100, nls_codepage);
-		bcc_ptr += 2 * length;	/* convert num of 16 bit words to bytes */
+		    cifs_strtoUCS((__le16 *) bcc_ptr, tree, 
+			6 /* max utf8 char length in bytes */ * 
+			(/* server len*/ + 256 /* share len */), nls_codepage);
+		bcc_ptr += 2 * length;	/* convert num 16 bit words to bytes */
 		bcc_ptr += 2;	/* skip trailing null */
 	} else {		/* ASCII */
 		strcpy(bcc_ptr, tree);
@@ -3447,6 +3526,12 @@ int cifs_setup_session(unsigned int xid, struct cifsSesInfo *pSesInfo,
 			pSesInfo->server->secMode,
 			pSesInfo->server->capabilities,
 			pSesInfo->server->timeZone));
+#ifdef CONFIG_CIFS_EXPERIMENTAL
+		if(experimEnabled > 1)
+			rc = CIFS_SessSetup(xid, pSesInfo, CIFS_NTLM /* type */,
+					    &ntlmv2_flag, nls_info);	
+		else
+#endif
 		if (extended_security
 				&& (pSesInfo->capabilities & CAP_EXTENDED_SECURITY)
 				&& (pSesInfo->server->secType == NTLMSSP)) {
diff --git a/fs/cifs/dir.c b/fs/cifs/dir.c
index 1d0ca3eaaca5..82315edc77d7 100644
--- a/fs/cifs/dir.c
+++ b/fs/cifs/dir.c
@@ -139,9 +139,7 @@ cifs_create(struct inode *inode, struct dentry *direntry, int mode,
 	cifs_sb = CIFS_SB(inode->i_sb);
 	pTcon = cifs_sb->tcon;
 
-	mutex_lock(&direntry->d_sb->s_vfs_rename_mutex);
 	full_path = build_path_from_dentry(direntry);
-	mutex_unlock(&direntry->d_sb->s_vfs_rename_mutex);
 	if(full_path == NULL) {
 		FreeXid(xid);
 		return -ENOMEM;
@@ -316,9 +314,7 @@ int cifs_mknod(struct inode *inode, struct dentry *direntry, int mode,
 	cifs_sb = CIFS_SB(inode->i_sb);
 	pTcon = cifs_sb->tcon;
 
-	mutex_lock(&direntry->d_sb->s_vfs_rename_mutex);
 	full_path = build_path_from_dentry(direntry);
-	mutex_unlock(&direntry->d_sb->s_vfs_rename_mutex);
 	if(full_path == NULL)
 		rc = -ENOMEM;
 	else if (pTcon->ses->capabilities & CAP_UNIX) {
@@ -440,6 +436,20 @@ cifs_lookup(struct inode *parent_dir_inode, struct dentry *direntry, struct name
 	cifs_sb = CIFS_SB(parent_dir_inode->i_sb);
 	pTcon = cifs_sb->tcon;
 
+	/*
+	 * Don't allow the separator character in a path component.
+	 * The VFS will not allow "/", but "\" is allowed by posix.
+	 */
+	if (!(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_POSIX_PATHS)) {
+		int i;
+		for (i = 0; i < direntry->d_name.len; i++)
+			if (direntry->d_name.name[i] == '\\') {
+				cFYI(1, ("Invalid file name"));
+				FreeXid(xid);
+				return ERR_PTR(-EINVAL);
+			}
+	}
+
 	/* can not grab the rename sem here since it would
 	deadlock in the cases (beginning of sys_rename itself)
 	in which we already have the sb rename sem */
diff --git a/fs/cifs/fcntl.c b/fs/cifs/fcntl.c
index ec4dfe9bf5ef..633a93811328 100644
--- a/fs/cifs/fcntl.c
+++ b/fs/cifs/fcntl.c
@@ -86,9 +86,7 @@ int cifs_dir_notify(struct file * file, unsigned long arg)
 	cifs_sb = CIFS_SB(file->f_dentry->d_sb);
 	pTcon = cifs_sb->tcon;
 
-	mutex_lock(&file->f_dentry->d_sb->s_vfs_rename_mutex);
 	full_path = build_path_from_dentry(file->f_dentry);
-	mutex_unlock(&file->f_dentry->d_sb->s_vfs_rename_mutex);
 
 	if(full_path == NULL) {
 		rc = -ENOMEM;
diff --git a/fs/cifs/file.c b/fs/cifs/file.c
index 5c497c529772..e2b4ce1dad66 100644
--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -84,6 +84,8 @@ static inline int cifs_get_disposition(unsigned int flags)
 		return FILE_OVERWRITE_IF;
 	else if ((flags & O_CREAT) == O_CREAT)
 		return FILE_OPEN_IF;
+	else if ((flags & O_TRUNC) == O_TRUNC)
+		return FILE_OVERWRITE;
 	else
 		return FILE_OPEN;
 }
@@ -203,9 +205,7 @@ int cifs_open(struct inode *inode, struct file *file)
 		}
 	}
 
-	mutex_lock(&inode->i_sb->s_vfs_rename_mutex);
 	full_path = build_path_from_dentry(file->f_dentry);
-	mutex_unlock(&inode->i_sb->s_vfs_rename_mutex);
 	if (full_path == NULL) {
 		FreeXid(xid);
 		return -ENOMEM;
@@ -658,7 +658,7 @@ int cifs_lock(struct file *file, int cmd, struct file_lock *pfLock)
 			else
 				posix_lock_type = CIFS_WRLCK;
 			rc = CIFSSMBPosixLock(xid, pTcon, netfid, 1 /* get */,
-					length,	pfLock->fl_start,
+					length,	pfLock,
 					posix_lock_type, wait_flag);
 			FreeXid(xid);
 			return rc;
@@ -706,7 +706,7 @@ int cifs_lock(struct file *file, int cmd, struct file_lock *pfLock)
 			return -EOPNOTSUPP;
 		}
 		rc = CIFSSMBPosixLock(xid, pTcon, netfid, 0 /* set */,
-				      length, pfLock->fl_start,
+				      length, pfLock,
 				      posix_lock_type, wait_flag);
 	} else
 		rc = CIFSSMBLock(xid, pTcon, netfid, length, pfLock->fl_start,
@@ -906,9 +906,10 @@ static ssize_t cifs_write(struct file *file, const char *write_data,
 				if (rc != 0)
 					break;
 			}
-			/* BB FIXME We can not sign across two buffers yet */
-			if((pTcon->ses->server->secMode & 
-			 (SECMODE_SIGN_REQUIRED | SECMODE_SIGN_ENABLED)) == 0) {
+			if(experimEnabled || (pTcon->ses->server &&
+				((pTcon->ses->server->secMode & 
+				(SECMODE_SIGN_REQUIRED | SECMODE_SIGN_ENABLED))
+				== 0))) {
 				struct kvec iov[2];
 				unsigned int len;
 
@@ -923,13 +924,13 @@ static ssize_t cifs_write(struct file *file, const char *write_data,
 						*poffset, &bytes_written,
 						iov, 1, long_op);
 			} else
-			/* BB FIXME fixup indentation of line below */
-			rc = CIFSSMBWrite(xid, pTcon,
-				 open_file->netfid,
-				 min_t(const int, cifs_sb->wsize, 
-				       write_size - total_written),
-				 *poffset, &bytes_written,
-				 write_data + total_written, NULL, long_op);
+				rc = CIFSSMBWrite(xid, pTcon,
+					 open_file->netfid,
+					 min_t(const int, cifs_sb->wsize,
+					       write_size - total_written),
+					 *poffset, &bytes_written,
+					 write_data + total_written,
+					 NULL, long_op);
 		}
 		if (rc || (bytes_written == 0)) {
 			if (total_written)
@@ -968,6 +969,16 @@ struct cifsFileInfo *find_writable_file(struct cifsInodeInfo *cifs_inode)
 	struct cifsFileInfo *open_file;
 	int rc;
 
+	/* Having a null inode here (because mapping->host was set to zero by
+	the VFS or MM) should not happen but we had reports of on oops (due to
+	it being zero) during stress testcases so we need to check for it */
+
+	if(cifs_inode == NULL) {
+		cERROR(1,("Null inode passed to cifs_writeable_file"));
+		dump_stack();
+		return NULL;
+	}
+
 	read_lock(&GlobalSMBSeslock);
 	list_for_each_entry(open_file, &cifs_inode->openFileList, flist) {
 		if (open_file->closePend)
@@ -1093,12 +1104,11 @@ static int cifs_writepages(struct address_space *mapping,
 	if (cifs_sb->wsize < PAGE_CACHE_SIZE)
 		return generic_writepages(mapping, wbc);
 
-	/* BB FIXME we do not have code to sign across multiple buffers yet,
-	   so go to older writepage style write which we can sign if needed */
 	if((cifs_sb->tcon->ses) && (cifs_sb->tcon->ses->server))
 		if(cifs_sb->tcon->ses->server->secMode &
                           (SECMODE_SIGN_REQUIRED | SECMODE_SIGN_ENABLED))
-			return generic_writepages(mapping, wbc);
+			if(!experimEnabled)
+				return generic_writepages(mapping, wbc);
 
 	/*
 	 * BB: Is this meaningful for a non-block-device file system?
diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c
index 957ddd1571c6..4093764ef461 100644
--- a/fs/cifs/inode.c
+++ b/fs/cifs/inode.c
@@ -722,9 +722,7 @@ int cifs_mkdir(struct inode *inode, struct dentry *direntry, int mode)
 	cifs_sb = CIFS_SB(inode->i_sb);
 	pTcon = cifs_sb->tcon;
 
-	mutex_lock(&inode->i_sb->s_vfs_rename_mutex);
 	full_path = build_path_from_dentry(direntry);
-	mutex_unlock(&inode->i_sb->s_vfs_rename_mutex);
 	if (full_path == NULL) {
 		FreeXid(xid);
 		return -ENOMEM;
@@ -807,9 +805,7 @@ int cifs_rmdir(struct inode *inode, struct dentry *direntry)
 	cifs_sb = CIFS_SB(inode->i_sb);
 	pTcon = cifs_sb->tcon;
 
-	mutex_lock(&inode->i_sb->s_vfs_rename_mutex);
 	full_path = build_path_from_dentry(direntry);
-	mutex_unlock(&inode->i_sb->s_vfs_rename_mutex);
 	if (full_path == NULL) {
 		FreeXid(xid);
 		return -ENOMEM;
@@ -1141,9 +1137,7 @@ int cifs_setattr(struct dentry *direntry, struct iattr *attrs)
 			rc = 0;
 	}
 		
-	mutex_lock(&direntry->d_sb->s_vfs_rename_mutex);
 	full_path = build_path_from_dentry(direntry);
-	mutex_unlock(&direntry->d_sb->s_vfs_rename_mutex);
 	if (full_path == NULL) {
 		FreeXid(xid);
 		return -ENOMEM;
diff --git a/fs/cifs/link.c b/fs/cifs/link.c
index 9562f5bba65c..2ec99f833142 100644
--- a/fs/cifs/link.c
+++ b/fs/cifs/link.c
@@ -48,10 +48,8 @@ cifs_hardlink(struct dentry *old_file, struct inode *inode,
 /* No need to check for cross device links since server will do that
    BB note DFS case in future though (when we may have to check) */
 
-	mutex_lock(&inode->i_sb->s_vfs_rename_mutex);
 	fromName = build_path_from_dentry(old_file);
 	toName = build_path_from_dentry(direntry);
-	mutex_unlock(&inode->i_sb->s_vfs_rename_mutex);
 	if((fromName == NULL) || (toName == NULL)) {
 		rc = -ENOMEM;
 		goto cifs_hl_exit;
@@ -103,9 +101,7 @@ cifs_follow_link(struct dentry *direntry, struct nameidata *nd)
 
 	xid = GetXid();
 
-	mutex_lock(&direntry->d_sb->s_vfs_rename_mutex);
 	full_path = build_path_from_dentry(direntry);
-	mutex_unlock(&direntry->d_sb->s_vfs_rename_mutex);
 
 	if (!full_path)
 		goto out_no_free;
@@ -164,9 +160,7 @@ cifs_symlink(struct inode *inode, struct dentry *direntry, const char *symname)
 	cifs_sb = CIFS_SB(inode->i_sb);
 	pTcon = cifs_sb->tcon;
 
-	mutex_lock(&inode->i_sb->s_vfs_rename_mutex);
 	full_path = build_path_from_dentry(direntry);
-	mutex_unlock(&inode->i_sb->s_vfs_rename_mutex);
 
 	if(full_path == NULL) {
 		FreeXid(xid);
diff --git a/fs/cifs/ntlmssp.c b/fs/cifs/ntlmssp.c
index 78866f925747..115359cc7a32 100644
--- a/fs/cifs/ntlmssp.c
+++ b/fs/cifs/ntlmssp.c
@@ -121,6 +121,20 @@ CIFS_SessSetup(unsigned int xid, struct cifsSesInfo *ses, const int type,
 	}
 
 
+	/* copy session key */
+
+	/* if Unicode, align strings to two byte boundary */
+
+	/* copy user name */ /* BB Do we need to special case null user name? */
+
+	/* copy domain name */
+
+	/* copy Linux version */
+
+	/* copy network operating system name */
+
+	/* update bcc and smb buffer length */
+
 /*	rc = SendReceive2(xid, ses, iov, num_iovecs, &resp_buf_type, 0); */
 	/* SMB request buf freed in SendReceive2 */
 
diff --git a/fs/cifs/readdir.c b/fs/cifs/readdir.c
index 2f6e2825571e..b689c5035124 100644
--- a/fs/cifs/readdir.c
+++ b/fs/cifs/readdir.c
@@ -404,9 +404,7 @@ static int initiate_cifs_search(const int xid, struct file *file)
 	if(pTcon == NULL)
 		return -EINVAL;
 
-	mutex_lock(&file->f_dentry->d_sb->s_vfs_rename_mutex);
 	full_path = build_path_from_dentry(file->f_dentry);
-	mutex_unlock(&file->f_dentry->d_sb->s_vfs_rename_mutex);
 
 	if(full_path == NULL) {
 		return -ENOMEM;
@@ -592,6 +590,13 @@ static int find_cifs_entry(const int xid, struct cifsTconInfo *pTcon,
 	first_entry_in_buffer = 
 		cifsFile->srch_inf.index_of_last_entry - 
 			cifsFile->srch_inf.entries_in_buffer;
+
+	/* if first entry in buf is zero then is first buffer
+	in search response data which means it is likely . and ..
+	will be in this buffer, although some servers do not return
+	. and .. for the root of a drive and for those we need
+	to start two entries earlier */
+
 /*	dump_cifs_file_struct(file, "In fce ");*/
 	if(((index_to_find < cifsFile->srch_inf.index_of_last_entry) && 
 	     is_dir_changed(file)) || 
@@ -634,23 +639,14 @@ static int find_cifs_entry(const int xid, struct cifsTconInfo *pTcon,
 		char * end_of_smb = cifsFile->srch_inf.ntwrk_buf_start + 
 			smbCalcSize((struct smb_hdr *)
 				cifsFile->srch_inf.ntwrk_buf_start);
+
+		current_entry = cifsFile->srch_inf.srch_entries_start;
 		first_entry_in_buffer = cifsFile->srch_inf.index_of_last_entry
 					- cifsFile->srch_inf.entries_in_buffer;
 		pos_in_buf = index_to_find - first_entry_in_buffer;
 		cFYI(1,("found entry - pos_in_buf %d",pos_in_buf)); 
-		current_entry = cifsFile->srch_inf.srch_entries_start;
 		for(i=0;(i<(pos_in_buf)) && (current_entry != NULL);i++) {
 			/* go entry by entry figuring out which is first */
-			/* if( . or ..)
-				skip */
-			rc = cifs_entry_is_dot(current_entry,cifsFile);
-			if(rc == 1) /* is . or .. so skip */ {
-				cFYI(1,("Entry is .")); /* BB removeme BB */
-				/* continue; */
-			} else if (rc == 2 ) {
-				cFYI(1,("Entry is ..")); /* BB removeme BB */
-				/* continue; */
-			}
 			current_entry = nxt_dir_entry(current_entry,end_of_smb);
 		}
 		if((current_entry == NULL) && (i < pos_in_buf)) {
@@ -770,6 +766,11 @@ static int cifs_filldir(char *pfindEntry, struct file *file,
 	if(file->f_dentry == NULL)
 		return -ENOENT;
 
+	rc = cifs_entry_is_dot(pfindEntry,pCifsF);
+	/* skip . and .. since we added them first */
+	if(rc != 0) 
+		return 0;
+
 	cifs_sb = CIFS_SB(file->f_dentry->d_sb);
 
 	qstring.name = scratch_buf;
@@ -898,22 +899,22 @@ int cifs_readdir(struct file *file, void *direntry, filldir_t filldir)
 
 	switch ((int) file->f_pos) {
 	case 0:
-		/*if (filldir(direntry, ".", 1, file->f_pos,
+		if (filldir(direntry, ".", 1, file->f_pos,
 		     file->f_dentry->d_inode->i_ino, DT_DIR) < 0) {
-			cERROR(1, ("Filldir for current dir failed "));
+			cERROR(1, ("Filldir for current dir failed"));
 			rc = -ENOMEM;
 			break;
 		}
-		file->f_pos++; */
+		file->f_pos++;
 	case 1:
-		/* if (filldir(direntry, "..", 2, file->f_pos,
+		if (filldir(direntry, "..", 2, file->f_pos,
 		     file->f_dentry->d_parent->d_inode->i_ino, DT_DIR) < 0) {
 			cERROR(1, ("Filldir for parent dir failed "));
 			rc = -ENOMEM;
 			break;
 		}
-		file->f_pos++; */
-	case 2:
+		file->f_pos++;
+	default:
 		/* 1) If search is active, 
 			is in current search buffer? 
 			if it before then restart search
@@ -927,7 +928,6 @@ int cifs_readdir(struct file *file, void *direntry, filldir_t filldir)
 				return rc;
 			}
 		}
-	default:
 		if(file->private_data == NULL) {
 			rc = -EINVAL;
 			FreeXid(xid);
@@ -947,8 +947,6 @@ int cifs_readdir(struct file *file, void *direntry, filldir_t filldir)
 		kfree(cifsFile->search_resume_name);
 		cifsFile->search_resume_name = NULL; */
 
-		/* BB account for . and .. in f_pos as special case */
-
 		rc = find_cifs_entry(xid,pTcon, file,
 				&current_entry,&num_to_fill);
 		if(rc) {
@@ -977,7 +975,8 @@ int cifs_readdir(struct file *file, void *direntry, filldir_t filldir)
 					  num_to_fill, i));
 				break;
 			}
-
+			/* if buggy server returns . and .. late do
+			we want to check for that here? */
 			rc = cifs_filldir(current_entry, file, 
 					filldir, direntry,tmp_buf);
 			file->f_pos++;
diff --git a/fs/cifs/xattr.c b/fs/cifs/xattr.c
index 3938444d87b2..7754d641775e 100644
--- a/fs/cifs/xattr.c
+++ b/fs/cifs/xattr.c
@@ -62,9 +62,7 @@ int cifs_removexattr(struct dentry * direntry, const char * ea_name)
 	cifs_sb = CIFS_SB(sb);
 	pTcon = cifs_sb->tcon;
                                                                                      
-	mutex_lock(&sb->s_vfs_rename_mutex);
 	full_path = build_path_from_dentry(direntry);
-	mutex_unlock(&sb->s_vfs_rename_mutex);
 	if(full_path == NULL) {
 		FreeXid(xid);
 		return -ENOMEM;
@@ -116,9 +114,7 @@ int cifs_setxattr(struct dentry * direntry, const char * ea_name,
 	cifs_sb = CIFS_SB(sb);
 	pTcon = cifs_sb->tcon;
 
-	mutex_lock(&sb->s_vfs_rename_mutex);
 	full_path = build_path_from_dentry(direntry);
-	mutex_unlock(&sb->s_vfs_rename_mutex);
 	if(full_path == NULL) {
 		FreeXid(xid);
 		return -ENOMEM;
@@ -223,9 +219,7 @@ ssize_t cifs_getxattr(struct dentry * direntry, const char * ea_name,
 	cifs_sb = CIFS_SB(sb);
 	pTcon = cifs_sb->tcon;
 
-	mutex_lock(&sb->s_vfs_rename_mutex);
 	full_path = build_path_from_dentry(direntry);
-	mutex_unlock(&sb->s_vfs_rename_mutex);
 	if(full_path == NULL) {
 		FreeXid(xid);
 		return -ENOMEM;
@@ -341,9 +335,7 @@ ssize_t cifs_listxattr(struct dentry * direntry, char * data, size_t buf_size)
 	cifs_sb = CIFS_SB(sb);
 	pTcon = cifs_sb->tcon;
 
-	mutex_lock(&sb->s_vfs_rename_mutex);
 	full_path = build_path_from_dentry(direntry);
-	mutex_unlock(&sb->s_vfs_rename_mutex);
 	if(full_path == NULL) {
 		FreeXid(xid);
 		return -ENOMEM;
diff --git a/fs/compat.c b/fs/compat.c
index 7f8e26ea427c..b1f64786a613 100644
--- a/fs/compat.c
+++ b/fs/compat.c
@@ -1217,6 +1217,10 @@ static ssize_t compat_do_readv_writev(int type, struct file *file,
 	if (ret < 0)
 		goto out;
 
+	ret = security_file_permission(file, type == READ ? MAY_READ:MAY_WRITE);
+	if (ret)
+		goto out;
+
 	fnv = NULL;
 	if (type == READ) {
 		fn = file->f_op->read;
@@ -1313,6 +1317,26 @@ out:
 	return ret;
 }
 
+asmlinkage long
+compat_sys_vmsplice(int fd, const struct compat_iovec __user *iov32,
+		    unsigned int nr_segs, unsigned int flags)
+{
+	unsigned i;
+	struct iovec *iov;
+	if (nr_segs > UIO_MAXIOV)
+		return -EINVAL;
+	iov = compat_alloc_user_space(nr_segs * sizeof(struct iovec));
+	for (i = 0; i < nr_segs; i++) {
+		struct compat_iovec v;
+		if (get_user(v.iov_base, &iov32[i].iov_base) ||
+		    get_user(v.iov_len, &iov32[i].iov_len) ||
+		    put_user(compat_ptr(v.iov_base), &iov[i].iov_base) ||
+		    put_user(v.iov_len, &iov[i].iov_len))
+			return -EFAULT;
+	}
+	return sys_vmsplice(fd, iov, nr_segs, flags);
+}
+
 /*
  * Exactly like fs/open.c:sys_open(), except that it doesn't set the
  * O_LARGEFILE flag.
@@ -1889,7 +1913,7 @@ asmlinkage long compat_sys_ppoll(struct pollfd __user *ufds,
 	}
 
 	if (sigmask) {
-		if (sigsetsize |= sizeof(compat_sigset_t))
+		if (sigsetsize != sizeof(compat_sigset_t))
 			return -EINVAL;
 		if (copy_from_user(&ss32, sigmask, sizeof(ss32)))
 			return -EFAULT;
@@ -2006,109 +2030,115 @@ union compat_nfsctl_res {
 	struct knfsd_fh		cr32_getfs;
 };
 
-static int compat_nfs_svc_trans(struct nfsctl_arg *karg, struct compat_nfsctl_arg __user *arg)
+static int compat_nfs_svc_trans(struct nfsctl_arg *karg,
+				struct compat_nfsctl_arg __user *arg)
 {
-	int err;
-
-	err = access_ok(VERIFY_READ, &arg->ca32_svc, sizeof(arg->ca32_svc));
-	err |= get_user(karg->ca_version, &arg->ca32_version);
-	err |= __get_user(karg->ca_svc.svc_port, &arg->ca32_svc.svc32_port);
-	err |= __get_user(karg->ca_svc.svc_nthreads, &arg->ca32_svc.svc32_nthreads);
-	return (err) ? -EFAULT : 0;
+	if (!access_ok(VERIFY_READ, &arg->ca32_svc, sizeof(arg->ca32_svc)) ||
+		get_user(karg->ca_version, &arg->ca32_version) ||
+		__get_user(karg->ca_svc.svc_port, &arg->ca32_svc.svc32_port) ||
+		__get_user(karg->ca_svc.svc_nthreads,
+				&arg->ca32_svc.svc32_nthreads))
+		return -EFAULT;
+	return 0;
 }
 
-static int compat_nfs_clnt_trans(struct nfsctl_arg *karg, struct compat_nfsctl_arg __user *arg)
+static int compat_nfs_clnt_trans(struct nfsctl_arg *karg,
+				struct compat_nfsctl_arg __user *arg)
 {
-	int err;
-
-	err = access_ok(VERIFY_READ, &arg->ca32_client, sizeof(arg->ca32_client));
-	err |= get_user(karg->ca_version, &arg->ca32_version);
-	err |= __copy_from_user(&karg->ca_client.cl_ident[0],
-			  &arg->ca32_client.cl32_ident[0],
-			  NFSCLNT_IDMAX);
-	err |= __get_user(karg->ca_client.cl_naddr, &arg->ca32_client.cl32_naddr);
-	err |= __copy_from_user(&karg->ca_client.cl_addrlist[0],
-			  &arg->ca32_client.cl32_addrlist[0],
-			  (sizeof(struct in_addr) * NFSCLNT_ADDRMAX));
-	err |= __get_user(karg->ca_client.cl_fhkeytype,
-		      &arg->ca32_client.cl32_fhkeytype);
-	err |= __get_user(karg->ca_client.cl_fhkeylen,
-		      &arg->ca32_client.cl32_fhkeylen);
-	err |= __copy_from_user(&karg->ca_client.cl_fhkey[0],
-			  &arg->ca32_client.cl32_fhkey[0],
-			  NFSCLNT_KEYMAX);
+	if (!access_ok(VERIFY_READ, &arg->ca32_client,
+			sizeof(arg->ca32_client)) ||
+		get_user(karg->ca_version, &arg->ca32_version) ||
+		__copy_from_user(&karg->ca_client.cl_ident[0],
+				&arg->ca32_client.cl32_ident[0],
+				NFSCLNT_IDMAX) ||
+		__get_user(karg->ca_client.cl_naddr,
+				&arg->ca32_client.cl32_naddr) ||
+		__copy_from_user(&karg->ca_client.cl_addrlist[0],
+				&arg->ca32_client.cl32_addrlist[0],
+				(sizeof(struct in_addr) * NFSCLNT_ADDRMAX)) ||
+		__get_user(karg->ca_client.cl_fhkeytype,
+				&arg->ca32_client.cl32_fhkeytype) ||
+		__get_user(karg->ca_client.cl_fhkeylen,
+				&arg->ca32_client.cl32_fhkeylen) ||
+		__copy_from_user(&karg->ca_client.cl_fhkey[0],
+				&arg->ca32_client.cl32_fhkey[0],
+				NFSCLNT_KEYMAX))
+		return -EFAULT;
 
-	return (err) ? -EFAULT : 0;
+	return 0;
 }
 
-static int compat_nfs_exp_trans(struct nfsctl_arg *karg, struct compat_nfsctl_arg __user *arg)
+static int compat_nfs_exp_trans(struct nfsctl_arg *karg,
+				struct compat_nfsctl_arg __user *arg)
 {
-	int err;
-
-	err = access_ok(VERIFY_READ, &arg->ca32_export, sizeof(arg->ca32_export));
-	err |= get_user(karg->ca_version, &arg->ca32_version);
-	err |= __copy_from_user(&karg->ca_export.ex_client[0],
-			  &arg->ca32_export.ex32_client[0],
-			  NFSCLNT_IDMAX);
-	err |= __copy_from_user(&karg->ca_export.ex_path[0],
-			  &arg->ca32_export.ex32_path[0],
-			  NFS_MAXPATHLEN);
-	err |= __get_user(karg->ca_export.ex_dev,
-		      &arg->ca32_export.ex32_dev);
-	err |= __get_user(karg->ca_export.ex_ino,
-		      &arg->ca32_export.ex32_ino);
-	err |= __get_user(karg->ca_export.ex_flags,
-		      &arg->ca32_export.ex32_flags);
-	err |= __get_user(karg->ca_export.ex_anon_uid,
-		      &arg->ca32_export.ex32_anon_uid);
-	err |= __get_user(karg->ca_export.ex_anon_gid,
-		      &arg->ca32_export.ex32_anon_gid);
+	if (!access_ok(VERIFY_READ, &arg->ca32_export,
+				sizeof(arg->ca32_export)) ||
+		get_user(karg->ca_version, &arg->ca32_version) ||
+		__copy_from_user(&karg->ca_export.ex_client[0],
+				&arg->ca32_export.ex32_client[0],
+				NFSCLNT_IDMAX) ||
+		__copy_from_user(&karg->ca_export.ex_path[0],
+				&arg->ca32_export.ex32_path[0],
+				NFS_MAXPATHLEN) ||
+		__get_user(karg->ca_export.ex_dev,
+				&arg->ca32_export.ex32_dev) ||
+		__get_user(karg->ca_export.ex_ino,
+				&arg->ca32_export.ex32_ino) ||
+		__get_user(karg->ca_export.ex_flags,
+				&arg->ca32_export.ex32_flags) ||
+		__get_user(karg->ca_export.ex_anon_uid,
+				&arg->ca32_export.ex32_anon_uid) ||
+		__get_user(karg->ca_export.ex_anon_gid,
+				&arg->ca32_export.ex32_anon_gid))
+		return -EFAULT;
 	SET_UID(karg->ca_export.ex_anon_uid, karg->ca_export.ex_anon_uid);
 	SET_GID(karg->ca_export.ex_anon_gid, karg->ca_export.ex_anon_gid);
 
-	return (err) ? -EFAULT : 0;
+	return 0;
 }
 
-static int compat_nfs_getfd_trans(struct nfsctl_arg *karg, struct compat_nfsctl_arg __user *arg)
+static int compat_nfs_getfd_trans(struct nfsctl_arg *karg,
+				struct compat_nfsctl_arg __user *arg)
 {
-	int err;
-
-	err = access_ok(VERIFY_READ, &arg->ca32_getfd, sizeof(arg->ca32_getfd));
-	err |= get_user(karg->ca_version, &arg->ca32_version);
-	err |= __copy_from_user(&karg->ca_getfd.gd_addr,
-			  &arg->ca32_getfd.gd32_addr,
-			  (sizeof(struct sockaddr)));
-	err |= __copy_from_user(&karg->ca_getfd.gd_path,
-			  &arg->ca32_getfd.gd32_path,
-			  (NFS_MAXPATHLEN+1));
-	err |= __get_user(karg->ca_getfd.gd_version,
-		      &arg->ca32_getfd.gd32_version);
+	if (!access_ok(VERIFY_READ, &arg->ca32_getfd,
+			sizeof(arg->ca32_getfd)) ||
+		get_user(karg->ca_version, &arg->ca32_version) ||
+		__copy_from_user(&karg->ca_getfd.gd_addr,
+				&arg->ca32_getfd.gd32_addr,
+				(sizeof(struct sockaddr))) ||
+		__copy_from_user(&karg->ca_getfd.gd_path,
+				&arg->ca32_getfd.gd32_path,
+				(NFS_MAXPATHLEN+1)) ||
+		__get_user(karg->ca_getfd.gd_version,
+				&arg->ca32_getfd.gd32_version))
+		return -EFAULT;
 
-	return (err) ? -EFAULT : 0;
+	return 0;
 }
 
-static int compat_nfs_getfs_trans(struct nfsctl_arg *karg, struct compat_nfsctl_arg __user *arg)
+static int compat_nfs_getfs_trans(struct nfsctl_arg *karg,
+				struct compat_nfsctl_arg __user *arg)
 {
-	int err;
-
-	err = access_ok(VERIFY_READ, &arg->ca32_getfs, sizeof(arg->ca32_getfs));
-	err |= get_user(karg->ca_version, &arg->ca32_version);
-	err |= __copy_from_user(&karg->ca_getfs.gd_addr,
-			  &arg->ca32_getfs.gd32_addr,
-			  (sizeof(struct sockaddr)));
-	err |= __copy_from_user(&karg->ca_getfs.gd_path,
-			  &arg->ca32_getfs.gd32_path,
-			  (NFS_MAXPATHLEN+1));
-	err |= __get_user(karg->ca_getfs.gd_maxlen,
-		      &arg->ca32_getfs.gd32_maxlen);
+	if (!access_ok(VERIFY_READ,&arg->ca32_getfs,sizeof(arg->ca32_getfs)) ||
+		get_user(karg->ca_version, &arg->ca32_version) ||
+		__copy_from_user(&karg->ca_getfs.gd_addr,
+				&arg->ca32_getfs.gd32_addr,
+				(sizeof(struct sockaddr))) ||
+		__copy_from_user(&karg->ca_getfs.gd_path,
+				&arg->ca32_getfs.gd32_path,
+				(NFS_MAXPATHLEN+1)) ||
+		__get_user(karg->ca_getfs.gd_maxlen,
+				&arg->ca32_getfs.gd32_maxlen))
+		return -EFAULT;
 
-	return (err) ? -EFAULT : 0;
+	return 0;
 }
 
 /* This really doesn't need translations, we are only passing
  * back a union which contains opaque nfs file handle data.
  */
-static int compat_nfs_getfh_res_trans(union nfsctl_res *kres, union compat_nfsctl_res __user *res)
+static int compat_nfs_getfh_res_trans(union nfsctl_res *kres,
+				union compat_nfsctl_res __user *res)
 {
 	int err;
 
@@ -2117,8 +2147,9 @@ static int compat_nfs_getfh_res_trans(union nfsctl_res *kres, union compat_nfsct
 	return (err) ? -EFAULT : 0;
 }
 
-asmlinkage long compat_sys_nfsservctl(int cmd, struct compat_nfsctl_arg __user *arg,
-					union compat_nfsctl_res __user *res)
+asmlinkage long compat_sys_nfsservctl(int cmd,
+				struct compat_nfsctl_arg __user *arg,
+				union compat_nfsctl_res __user *res)
 {
 	struct nfsctl_arg *karg;
 	union nfsctl_res *kres;
diff --git a/fs/configfs/dir.c b/fs/configfs/dir.c
index 5638c8f9362f..5f952187fc53 100644
--- a/fs/configfs/dir.c
+++ b/fs/configfs/dir.c
@@ -505,13 +505,15 @@ static int populate_groups(struct config_group *group)
 	int i;
 
 	if (group->default_groups) {
-		/* FYI, we're faking mkdir here
+		/*
+		 * FYI, we're faking mkdir here
 		 * I'm not sure we need this semaphore, as we're called
 		 * from our parent's mkdir.  That holds our parent's
 		 * i_mutex, so afaik lookup cannot continue through our
 		 * parent to find us, let alone mess with our tree.
 		 * That said, taking our i_mutex is closer to mkdir
-		 * emulation, and shouldn't hurt. */
+		 * emulation, and shouldn't hurt.
+		 */
 		mutex_lock(&dentry->d_inode->i_mutex);
 
 		for (i = 0; group->default_groups[i]; i++) {
@@ -546,20 +548,34 @@ static void unlink_obj(struct config_item *item)
 
 		item->ci_group = NULL;
 		item->ci_parent = NULL;
+
+		/* Drop the reference for ci_entry */
 		config_item_put(item);
 
+		/* Drop the reference for ci_parent */
 		config_group_put(group);
 	}
 }
 
 static void link_obj(struct config_item *parent_item, struct config_item *item)
 {
-	/* Parent seems redundant with group, but it makes certain
-	 * traversals much nicer. */
+	/*
+	 * Parent seems redundant with group, but it makes certain
+	 * traversals much nicer.
+	 */
 	item->ci_parent = parent_item;
+
+	/*
+	 * We hold a reference on the parent for the child's ci_parent
+	 * link.
+	 */
 	item->ci_group = config_group_get(to_config_group(parent_item));
 	list_add_tail(&item->ci_entry, &item->ci_group->cg_children);
 
+	/*
+	 * We hold a reference on the child for ci_entry on the parent's
+	 * cg_children
+	 */
 	config_item_get(item);
 }
 
@@ -684,6 +700,10 @@ static void client_drop_item(struct config_item *parent_item,
 	type = parent_item->ci_type;
 	BUG_ON(!type);
 
+	/*
+	 * If ->drop_item() exists, it is responsible for the
+	 * config_item_put().
+	 */
 	if (type->ct_group_ops && type->ct_group_ops->drop_item)
 		type->ct_group_ops->drop_item(to_config_group(parent_item),
 						item);
@@ -694,23 +714,28 @@ static void client_drop_item(struct config_item *parent_item,
 
 static int configfs_mkdir(struct inode *dir, struct dentry *dentry, int mode)
 {
-	int ret;
+	int ret, module_got = 0;
 	struct config_group *group;
 	struct config_item *item;
 	struct config_item *parent_item;
 	struct configfs_subsystem *subsys;
 	struct configfs_dirent *sd;
 	struct config_item_type *type;
-	struct module *owner;
+	struct module *owner = NULL;
 	char *name;
 
-	if (dentry->d_parent == configfs_sb->s_root)
-		return -EPERM;
+	if (dentry->d_parent == configfs_sb->s_root) {
+		ret = -EPERM;
+		goto out;
+	}
 
 	sd = dentry->d_parent->d_fsdata;
-	if (!(sd->s_type & CONFIGFS_USET_DIR))
-		return -EPERM;
+	if (!(sd->s_type & CONFIGFS_USET_DIR)) {
+		ret = -EPERM;
+		goto out;
+	}
 
+	/* Get a working ref for the duration of this function */
 	parent_item = configfs_get_config_item(dentry->d_parent);
 	type = parent_item->ci_type;
 	subsys = to_config_group(parent_item)->cg_subsys;
@@ -719,15 +744,16 @@ static int configfs_mkdir(struct inode *dir, struct dentry *dentry, int mode)
 	if (!type || !type->ct_group_ops ||
 	    (!type->ct_group_ops->make_group &&
 	     !type->ct_group_ops->make_item)) {
-		config_item_put(parent_item);
-		return -EPERM;  /* What lack-of-mkdir returns */
+		ret = -EPERM;  /* Lack-of-mkdir returns -EPERM */
+		goto out_put;
 	}
 
 	name = kmalloc(dentry->d_name.len + 1, GFP_KERNEL);
 	if (!name) {
-		config_item_put(parent_item);
-		return -ENOMEM;
+		ret = -ENOMEM;
+		goto out_put;
 	}
+
 	snprintf(name, dentry->d_name.len + 1, "%s", dentry->d_name.name);
 
 	down(&subsys->su_sem);
@@ -748,40 +774,67 @@ static int configfs_mkdir(struct inode *dir, struct dentry *dentry, int mode)
 
 	kfree(name);
 	if (!item) {
-		config_item_put(parent_item);
-		return -ENOMEM;
+		/*
+		 * If item == NULL, then link_obj() was never called.
+		 * There are no extra references to clean up.
+		 */
+		ret = -ENOMEM;
+		goto out_put;
 	}
 
-	ret = -EINVAL;
+	/*
+	 * link_obj() has been called (via link_group() for groups).
+	 * From here on out, errors must clean that up.
+	 */
+
 	type = item->ci_type;
-	if (type) {
-		owner = type->ct_owner;
-		if (try_module_get(owner)) {
-			if (group) {
-				ret = configfs_attach_group(parent_item,
-							    item,
-							    dentry);
-			} else {
-				ret = configfs_attach_item(parent_item,
-							   item,
-							   dentry);
-			}
+	if (!type) {
+		ret = -EINVAL;
+		goto out_unlink;
+	}
 
-			if (ret) {
-				down(&subsys->su_sem);
-				if (group)
-					unlink_group(group);
-				else
-					unlink_obj(item);
-				client_drop_item(parent_item, item);
-				up(&subsys->su_sem);
+	owner = type->ct_owner;
+	if (!try_module_get(owner)) {
+		ret = -EINVAL;
+		goto out_unlink;
+	}
 
-				config_item_put(parent_item);
-				module_put(owner);
-			}
-		}
+	/*
+	 * I hate doing it this way, but if there is
+	 * an error,  module_put() probably should
+	 * happen after any cleanup.
+	 */
+	module_got = 1;
+
+	if (group)
+		ret = configfs_attach_group(parent_item, item, dentry);
+	else
+		ret = configfs_attach_item(parent_item, item, dentry);
+
+out_unlink:
+	if (ret) {
+		/* Tear down everything we built up */
+		down(&subsys->su_sem);
+		if (group)
+			unlink_group(group);
+		else
+			unlink_obj(item);
+		client_drop_item(parent_item, item);
+		up(&subsys->su_sem);
+
+		if (module_got)
+			module_put(owner);
 	}
 
+out_put:
+	/*
+	 * link_obj()/link_group() took a reference from child->parent,
+	 * so the parent is safely pinned.  We can drop our working
+	 * reference.
+	 */
+	config_item_put(parent_item);
+
+out:
 	return ret;
 }
 
@@ -801,6 +854,7 @@ static int configfs_rmdir(struct inode *dir, struct dentry *dentry)
 	if (sd->s_type & CONFIGFS_USET_DEFAULT)
 		return -EPERM;
 
+	/* Get a working ref until we have the child */
 	parent_item = configfs_get_config_item(dentry->d_parent);
 	subsys = to_config_group(parent_item)->cg_subsys;
 	BUG_ON(!subsys);
@@ -817,6 +871,7 @@ static int configfs_rmdir(struct inode *dir, struct dentry *dentry)
 		return ret;
 	}
 
+	/* Get a working ref for the duration of this function */
 	item = configfs_get_config_item(dentry);
 
 	/* Drop reference from above, item already holds one. */
diff --git a/fs/debugfs/inode.c b/fs/debugfs/inode.c
index 85d166cdcae4..b55b4ea9a676 100644
--- a/fs/debugfs/inode.c
+++ b/fs/debugfs/inode.c
@@ -67,12 +67,13 @@ static struct inode *debugfs_get_inode(struct super_block *sb, int mode, dev_t d
 static int debugfs_mknod(struct inode *dir, struct dentry *dentry,
 			 int mode, dev_t dev)
 {
-	struct inode *inode = debugfs_get_inode(dir->i_sb, mode, dev);
+	struct inode *inode;
 	int error = -EPERM;
 
 	if (dentry->d_inode)
 		return -EEXIST;
 
+	inode = debugfs_get_inode(dir->i_sb, mode, dev);
 	if (inode) {
 		d_instantiate(dentry, inode);
 		dget(dentry);
diff --git a/fs/exec.c b/fs/exec.c
index 3234a0c32d54..3a79d97ac234 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -665,9 +665,7 @@ static int de_thread(struct task_struct *tsk)
 	 * and to assume its PID:
 	 */
 	if (!thread_group_leader(current)) {
-		struct task_struct *parent;
 		struct dentry *proc_dentry1, *proc_dentry2;
-		unsigned long ptrace;
 
 		/*
 		 * Wait for the thread group leader to be a zombie.
@@ -704,22 +702,6 @@ static int de_thread(struct task_struct *tsk)
 		 * two threads with a switched PID, and release
 		 * the former thread group leader:
 		 */
-		ptrace = leader->ptrace;
-		parent = leader->parent;
-		if (unlikely(ptrace) && unlikely(parent == current)) {
-			/*
-			 * Joker was ptracing his own group leader,
-			 * and now he wants to be his own parent!
-			 * We can't have that.
-			 */
-			ptrace = 0;
-		}
-
-		ptrace_unlink(current);
-		ptrace_unlink(leader);
-		remove_parent(current);
-		remove_parent(leader);
-
 
 		/* Become a process group leader with the old leader's pid.
 		 * Note: The old leader also uses thispid until release_task
@@ -730,10 +712,8 @@ static int de_thread(struct task_struct *tsk)
 		attach_pid(current, PIDTYPE_PID,  current->pid);
 		attach_pid(current, PIDTYPE_PGID, current->signal->pgrp);
 		attach_pid(current, PIDTYPE_SID,  current->signal->session);
-		list_add_tail(&current->tasks, &init_task.tasks);
+		list_add_tail_rcu(&current->tasks, &init_task.tasks);
 
-		current->parent = current->real_parent = leader->real_parent;
-		leader->parent = leader->real_parent = child_reaper;
 		current->group_leader = current;
 		leader->group_leader = current;
 
@@ -742,13 +722,6 @@ static int de_thread(struct task_struct *tsk)
 		detach_pid(leader, PIDTYPE_SID);
 		list_del_init(&leader->tasks);
 
-		add_parent(current);
-		add_parent(leader);
-		if (ptrace) {
-			current->ptrace = ptrace;
-			__ptrace_link(current, parent);
-		}
-
 		current->exit_signal = SIGCHLD;
 
 		BUG_ON(leader->exit_state != EXIT_ZOMBIE);
diff --git a/fs/exportfs/expfs.c b/fs/exportfs/expfs.c
index b06b54f1bbbb..4c39009350f3 100644
--- a/fs/exportfs/expfs.c
+++ b/fs/exportfs/expfs.c
@@ -102,7 +102,7 @@ find_exported_dentry(struct super_block *sb, void *obj, void *parent,
 		if (acceptable(context, result))
 			return result;
 		if (S_ISDIR(result->d_inode->i_mode)) {
-			/* there is no other dentry, so fail */
+			err = -EACCES;
 			goto err_result;
 		}
 
diff --git a/fs/ext3/inode.c b/fs/ext3/inode.c
index 48ae0339af17..2edd7eec88fd 100644
--- a/fs/ext3/inode.c
+++ b/fs/ext3/inode.c
@@ -711,7 +711,7 @@ static int ext3_splice_branch(handle_t *handle, struct inode *inode,
 	 * direct blocks blocks
 	 */
 	if (num == 0 && blks > 1) {
-		current_block = le32_to_cpu(where->key + 1);
+		current_block = le32_to_cpu(where->key) + 1;
 		for (i = 1; i < blks; i++)
 			*(where->p + i ) = cpu_to_le32(current_block++);
 	}
@@ -724,7 +724,7 @@ static int ext3_splice_branch(handle_t *handle, struct inode *inode,
 	if (block_i) {
 		block_i->last_alloc_logical_block = block + blks - 1;
 		block_i->last_alloc_physical_block =
-				le32_to_cpu(where[num].key + blks - 1);
+				le32_to_cpu(where[num].key) + blks - 1;
 	}
 
 	/* We are done with atomic stuff, now do the rest of housekeeping */
@@ -814,11 +814,13 @@ int ext3_get_blocks_handle(handle_t *handle, struct inode *inode,
 
 	/* Simplest case - block found, no allocation needed */
 	if (!partial) {
-		first_block = chain[depth - 1].key;
+		first_block = le32_to_cpu(chain[depth - 1].key);
 		clear_buffer_new(bh_result);
 		count++;
 		/*map more blocks*/
 		while (count < maxblocks && count <= blocks_to_boundary) {
+			unsigned long blk;
+
 			if (!verify_chain(chain, partial)) {
 				/*
 				 * Indirect block might be removed by
@@ -831,8 +833,9 @@ int ext3_get_blocks_handle(handle_t *handle, struct inode *inode,
 				count = 0;
 				break;
 			}
-			if (le32_to_cpu(*(chain[depth-1].p+count) ==
-					(first_block + count)))
+			blk = le32_to_cpu(*(chain[depth-1].p + count));
+
+			if (blk == first_block + count)
 				count++;
 			else
 				break;
diff --git a/fs/ext3/ioctl.c b/fs/ext3/ioctl.c
index aaf1da17b6d4..8c22aa9a7fbb 100644
--- a/fs/ext3/ioctl.c
+++ b/fs/ext3/ioctl.c
@@ -48,6 +48,7 @@ int ext3_ioctl (struct inode * inode, struct file * filp, unsigned int cmd,
 		if (!S_ISDIR(inode->i_mode))
 			flags &= ~EXT3_DIRSYNC_FL;
 
+		mutex_lock(&inode->i_mutex);
 		oldflags = ei->i_flags;
 
 		/* The JOURNAL_DATA flag is modifiable only by root */
@@ -60,8 +61,10 @@ int ext3_ioctl (struct inode * inode, struct file * filp, unsigned int cmd,
 		 * This test looks nicer. Thanks to Pauline Middelink
 		 */
 		if ((flags ^ oldflags) & (EXT3_APPEND_FL | EXT3_IMMUTABLE_FL)) {
-			if (!capable(CAP_LINUX_IMMUTABLE))
+			if (!capable(CAP_LINUX_IMMUTABLE)) {
+				mutex_unlock(&inode->i_mutex);
 				return -EPERM;
+			}
 		}
 
 		/*
@@ -69,14 +72,18 @@ int ext3_ioctl (struct inode * inode, struct file * filp, unsigned int cmd,
 		 * the relevant capability.
 		 */
 		if ((jflag ^ oldflags) & (EXT3_JOURNAL_DATA_FL)) {
-			if (!capable(CAP_SYS_RESOURCE))
+			if (!capable(CAP_SYS_RESOURCE)) {
+				mutex_unlock(&inode->i_mutex);
 				return -EPERM;
+			}
 		}
 
 
 		handle = ext3_journal_start(inode, 1);
-		if (IS_ERR(handle))
+		if (IS_ERR(handle)) {
+			mutex_unlock(&inode->i_mutex);
 			return PTR_ERR(handle);
+		}
 		if (IS_SYNC(inode))
 			handle->h_sync = 1;
 		err = ext3_reserve_inode_write(handle, inode, &iloc);
@@ -93,11 +100,14 @@ int ext3_ioctl (struct inode * inode, struct file * filp, unsigned int cmd,
 		err = ext3_mark_iloc_dirty(handle, inode, &iloc);
 flags_err:
 		ext3_journal_stop(handle);
-		if (err)
+		if (err) {
+			mutex_unlock(&inode->i_mutex);
 			return err;
+		}
 
 		if ((jflag ^ oldflags) & (EXT3_JOURNAL_DATA_FL))
 			err = ext3_change_inode_journal_flag(inode, jflag);
+		mutex_unlock(&inode->i_mutex);
 		return err;
 	}
 	case EXT3_IOC_GETVERSION:
diff --git a/fs/ext3/resize.c b/fs/ext3/resize.c
index 14f5f6ea3e72..34b39e9a1e5a 100644
--- a/fs/ext3/resize.c
+++ b/fs/ext3/resize.c
@@ -213,7 +213,7 @@ static int setup_new_group_blocks(struct super_block *sb,
 			goto exit_bh;
 		}
 		lock_buffer(bh);
-		memcpy(gdb->b_data, sbi->s_group_desc[i], bh->b_size);
+		memcpy(gdb->b_data, sbi->s_group_desc[i]->b_data, bh->b_size);
 		set_buffer_uptodate(gdb);
 		unlock_buffer(bh);
 		ext3_journal_dirty_metadata(handle, gdb);
diff --git a/fs/fuse/dev.c b/fs/fuse/dev.c
index 6c740f860665..104a62dadb94 100644
--- a/fs/fuse/dev.c
+++ b/fs/fuse/dev.c
@@ -92,40 +92,52 @@ struct fuse_req *fuse_get_req(struct fuse_conn *fc)
 {
 	struct fuse_req *req;
 	sigset_t oldset;
+	int intr;
 	int err;
 
+	atomic_inc(&fc->num_waiting);
 	block_sigs(&oldset);
-	err = wait_event_interruptible(fc->blocked_waitq, !fc->blocked);
+	intr = wait_event_interruptible(fc->blocked_waitq, !fc->blocked);
 	restore_sigs(&oldset);
-	if (err)
-		return ERR_PTR(-EINTR);
+	err = -EINTR;
+	if (intr)
+		goto out;
 
 	req = fuse_request_alloc();
+	err = -ENOMEM;
 	if (!req)
-		return ERR_PTR(-ENOMEM);
+		goto out;
 
-	atomic_inc(&fc->num_waiting);
-	fuse_request_init(req);
 	req->in.h.uid = current->fsuid;
 	req->in.h.gid = current->fsgid;
 	req->in.h.pid = current->pid;
+	req->waiting = 1;
 	return req;
+
+ out:
+	atomic_dec(&fc->num_waiting);
+	return ERR_PTR(err);
 }
 
 void fuse_put_request(struct fuse_conn *fc, struct fuse_req *req)
 {
 	if (atomic_dec_and_test(&req->count)) {
-		atomic_dec(&fc->num_waiting);
+		if (req->waiting)
+			atomic_dec(&fc->num_waiting);
 		fuse_request_free(req);
 	}
 }
 
+/*
+ * Called with sbput_sem held for read (request_end) or write
+ * (fuse_put_super).  By the time fuse_put_super() is finished, all
+ * inodes belonging to background requests must be released, so the
+ * iputs have to be done within the locked region.
+ */
 void fuse_release_background(struct fuse_conn *fc, struct fuse_req *req)
 {
 	iput(req->inode);
 	iput(req->inode2);
-	if (req->file)
-		fput(req->file);
 	spin_lock(&fc->lock);
 	list_del(&req->bg_entry);
 	if (fc->num_background == FUSE_MAX_BACKGROUND) {
@@ -170,6 +182,11 @@ static void request_end(struct fuse_conn *fc, struct fuse_req *req)
 		if (fc->mounted)
 			fuse_release_background(fc, req);
 		up_read(&fc->sbput_sem);
+
+		/* fput must go outside sbput_sem, otherwise it can deadlock */
+		if (req->file)
+			fput(req->file);
+
 		if (end)
 			end(fc, req);
 		else
@@ -277,6 +294,10 @@ static void queue_request(struct fuse_conn *fc, struct fuse_req *req)
 		len_args(req->in.numargs, (struct fuse_arg *) req->in.args);
 	list_add_tail(&req->list, &fc->pending);
 	req->state = FUSE_REQ_PENDING;
+	if (!req->waiting) {
+		req->waiting = 1;
+		atomic_inc(&fc->num_waiting);
+	}
 	wake_up(&fc->waitq);
 	kill_fasync(&fc->fasync, SIGIO, POLL_IN);
 }
diff --git a/fs/fuse/file.c b/fs/fuse/file.c
index e4f041a11bb5..fc342cf7c2cc 100644
--- a/fs/fuse/file.c
+++ b/fs/fuse/file.c
@@ -1,6 +1,6 @@
 /*
   FUSE: Filesystem in Userspace
-  Copyright (C) 2001-2005  Miklos Szeredi <miklos@szeredi.hu>
+  Copyright (C) 2001-2006  Miklos Szeredi <miklos@szeredi.hu>
 
   This program can be distributed under the terms of the GNU GPL.
   See the file COPYING.
@@ -565,8 +565,12 @@ static ssize_t fuse_direct_io(struct file *file, const char __user *buf,
 		buf += nres;
 		if (nres != nbytes)
 			break;
-		if (count)
-			fuse_reset_request(req);
+		if (count) {
+			fuse_put_request(fc, req);
+			req = fuse_get_req(fc);
+			if (IS_ERR(req))
+				break;
+		}
 	}
 	fuse_put_request(fc, req);
 	if (res > 0) {
diff --git a/fs/fuse/fuse_i.h b/fs/fuse/fuse_i.h
index 19c7185a7546..0474202cb5dc 100644
--- a/fs/fuse/fuse_i.h
+++ b/fs/fuse/fuse_i.h
@@ -159,6 +159,9 @@ struct fuse_req {
 	/** Data is being copied to/from the request */
 	unsigned locked:1;
 
+	/** Request is counted as "waiting" */
+	unsigned waiting:1;
+
 	/** State of the request */
 	enum fuse_req_state state;
 
diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c
index fd34037b0588..7627022446b2 100644
--- a/fs/fuse/inode.c
+++ b/fs/fuse/inode.c
@@ -500,11 +500,6 @@ static int fuse_fill_super(struct super_block *sb, void *data, int silent)
 	if (file->f_op != &fuse_dev_operations)
 		return -EINVAL;
 
-	/* Setting file->private_data can't race with other mount()
-	   instances, since BKL is held for ->get_sb() */
-	if (file->private_data)
-		return -EINVAL;
-
 	fc = new_conn();
 	if (!fc)
 		return -ENOMEM;
@@ -540,6 +535,12 @@ static int fuse_fill_super(struct super_block *sb, void *data, int silent)
 	if (err)
 		goto err_free_req;
 
+	/* Setting file->private_data can't race with other mount()
+	   instances, since BKL is held for ->get_sb() */
+	err = -EINVAL;
+	if (file->private_data)
+		goto err_kobject_del;
+
 	sb->s_root = root_dentry;
 	fc->mounted = 1;
 	fc->connected = 1;
@@ -556,6 +557,8 @@ static int fuse_fill_super(struct super_block *sb, void *data, int silent)
 
 	return 0;
 
+ err_kobject_del:
+	kobject_del(&fc->kobj);
  err_free_req:
 	fuse_request_free(init_req);
  err_put_root:
diff --git a/fs/inotify.c b/fs/inotify.c
index 1f50302849c5..732ec4bd5774 100644
--- a/fs/inotify.c
+++ b/fs/inotify.c
@@ -848,7 +848,11 @@ static int inotify_release(struct inode *ignored, struct file *file)
 		inode = watch->inode;
 		mutex_lock(&inode->inotify_mutex);
 		mutex_lock(&dev->mutex);
-		remove_watch_no_event(watch, dev);
+
+		/* make sure we didn't race with another list removal */
+		if (likely(idr_find(&dev->idr, watch->wd)))
+			remove_watch_no_event(watch, dev);
+
 		mutex_unlock(&dev->mutex);
 		mutex_unlock(&inode->inotify_mutex);
 		put_inotify_watch(watch);
@@ -890,8 +894,7 @@ static int inotify_ignore(struct inotify_device *dev, s32 wd)
 	mutex_lock(&dev->mutex);
 
 	/* make sure that we did not race */
-	watch = idr_find(&dev->idr, wd);
-	if (likely(watch))
+	if (likely(idr_find(&dev->idr, wd) == watch))
 		remove_watch(watch, dev);
 
 	mutex_unlock(&dev->mutex);
diff --git a/fs/jffs2/nodelist.c b/fs/jffs2/nodelist.c
index d4d0c41490cd..1d46677afd17 100644
--- a/fs/jffs2/nodelist.c
+++ b/fs/jffs2/nodelist.c
@@ -438,7 +438,8 @@ static int check_node_data(struct jffs2_sb_info *c, struct jffs2_tmp_dnode_info
 	if (c->mtd->point) {
 		err = c->mtd->point(c->mtd, ofs, len, &retlen, &buffer);
 		if (!err && retlen < tn->csize) {
-			JFFS2_WARNING("MTD point returned len too short: %u instead of %u.\n", retlen, tn->csize);
+			JFFS2_WARNING("MTD point returned len too short: %zu "
+					"instead of %u.\n", retlen, tn->csize);
 			c->mtd->unpoint(c->mtd, buffer, ofs, len);
 		} else if (err)
 			JFFS2_WARNING("MTD point failed: error code %d.\n", err);
@@ -461,7 +462,8 @@ static int check_node_data(struct jffs2_sb_info *c, struct jffs2_tmp_dnode_info
 		}
 
 		if (retlen != len) {
-			JFFS2_ERROR("short read at %#08x: %d instead of %d.\n", ofs, retlen, len);
+			JFFS2_ERROR("short read at %#08x: %zd instead of %d.\n",
+					ofs, retlen, len);
 			err = -EIO;
 			goto free_out;
 		}
diff --git a/fs/jfs/jfs_metapage.c b/fs/jfs/jfs_metapage.c
index f28696f235c4..2b220dd6b4e7 100644
--- a/fs/jfs/jfs_metapage.c
+++ b/fs/jfs/jfs_metapage.c
@@ -542,7 +542,7 @@ add_failed:
 static int metapage_releasepage(struct page *page, gfp_t gfp_mask)
 {
 	struct metapage *mp;
-	int busy = 0;
+	int ret = 1;
 	unsigned int offset;
 
 	for (offset = 0; offset < PAGE_CACHE_SIZE; offset += PSIZE) {
@@ -552,30 +552,20 @@ static int metapage_releasepage(struct page *page, gfp_t gfp_mask)
 			continue;
 
 		jfs_info("metapage_releasepage: mp = 0x%p", mp);
-		if (mp->count || mp->nohomeok) {
+		if (mp->count || mp->nohomeok ||
+		    test_bit(META_dirty, &mp->flag)) {
 			jfs_info("count = %ld, nohomeok = %d", mp->count,
 				 mp->nohomeok);
-			busy = 1;
+			ret = 0;
 			continue;
 		}
-		wait_on_page_writeback(page);
-		//WARN_ON(test_bit(META_dirty, &mp->flag));
-		if (test_bit(META_dirty, &mp->flag)) {
-			dump_mem("dirty mp in metapage_releasepage", mp,
-				 sizeof(struct metapage));
-			dump_mem("page", page, sizeof(struct page));
-			dump_stack();
-		}
 		if (mp->lsn)
 			remove_from_logsync(mp);
 		remove_metapage(page, mp);
 		INCREMENT(mpStat.pagefree);
 		free_metapage(mp);
 	}
-	if (busy)
-		return -1;
-
-	return 0;
+	return ret;
 }
 
 static void metapage_invalidatepage(struct page *page, unsigned long offset)
diff --git a/fs/lockd/svclock.c b/fs/lockd/svclock.c
index d2b66bad7d50..3ef739120dff 100644
--- a/fs/lockd/svclock.c
+++ b/fs/lockd/svclock.c
@@ -650,7 +650,7 @@ static void nlmsvc_grant_callback(struct rpc_task *task, void *data)
 	svc_wake_up(block->b_daemon);
 }
 
-void nlmsvc_grant_release(void *data)
+static void nlmsvc_grant_release(void *data)
 {
 	struct nlm_rqst		*call = data;
 
diff --git a/fs/locks.c b/fs/locks.c
index dda83d6cd48b..6f99c0a6f836 100644
--- a/fs/locks.c
+++ b/fs/locks.c
@@ -446,15 +446,14 @@ static struct lock_manager_operations lease_manager_ops = {
  */
 static int lease_init(struct file *filp, int type, struct file_lock *fl)
  {
+	if (assign_type(fl, type) != 0)
+		return -EINVAL;
+
 	fl->fl_owner = current->files;
 	fl->fl_pid = current->tgid;
 
 	fl->fl_file = filp;
 	fl->fl_flags = FL_LEASE;
-	if (assign_type(fl, type) != 0) {
-		locks_free_lock(fl);
-		return -EINVAL;
-	}
 	fl->fl_start = 0;
 	fl->fl_end = OFFSET_MAX;
 	fl->fl_ops = NULL;
@@ -466,16 +465,19 @@ static int lease_init(struct file *filp, int type, struct file_lock *fl)
 static int lease_alloc(struct file *filp, int type, struct file_lock **flp)
 {
 	struct file_lock *fl = locks_alloc_lock();
-	int error;
+	int error = -ENOMEM;
 
 	if (fl == NULL)
-		return -ENOMEM;
+		goto out;
 
 	error = lease_init(filp, type, fl);
-	if (error)
-		return error;
+	if (error) {
+		locks_free_lock(fl);
+		fl = NULL;
+	}
+out:
 	*flp = fl;
-	return 0;
+	return error;
 }
 
 /* Check if two locks overlap each other.
@@ -1372,6 +1374,7 @@ static int __setlease(struct file *filp, long arg, struct file_lock **flp)
 		goto out;
 
 	if (my_before != NULL) {
+		*flp = *my_before;
 		error = lease->fl_lmops->fl_change(my_before, arg);
 		goto out;
 	}
@@ -2230,7 +2233,12 @@ void steal_locks(fl_owner_t from)
 
 	lock_kernel();
 	j = 0;
-	rcu_read_lock();
+
+	/*
+	 * We are not taking a ref to the file structures, so
+	 * we need to acquire ->file_lock.
+	 */
+	spin_lock(&files->file_lock);
 	fdt = files_fdtable(files);
 	for (;;) {
 		unsigned long set;
@@ -2248,7 +2256,7 @@ void steal_locks(fl_owner_t from)
 			set >>= 1;
 		}
 	}
-	rcu_read_unlock();
+	spin_unlock(&files->file_lock);
 	unlock_kernel();
 }
 EXPORT_SYMBOL(steal_locks);
diff --git a/fs/namei.c b/fs/namei.c
index 96723ae83c89..d6e2ee251736 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -1080,8 +1080,8 @@ static int fastcall do_path_lookup(int dfd, const char *name,
 	nd->flags = flags;
 	nd->depth = 0;
 
-	read_lock(&current->fs->lock);
 	if (*name=='/') {
+		read_lock(&current->fs->lock);
 		if (current->fs->altroot && !(nd->flags & LOOKUP_NOALT)) {
 			nd->mnt = mntget(current->fs->altrootmnt);
 			nd->dentry = dget(current->fs->altroot);
@@ -1092,33 +1092,35 @@ static int fastcall do_path_lookup(int dfd, const char *name,
 		}
 		nd->mnt = mntget(current->fs->rootmnt);
 		nd->dentry = dget(current->fs->root);
+		read_unlock(&current->fs->lock);
 	} else if (dfd == AT_FDCWD) {
+		read_lock(&current->fs->lock);
 		nd->mnt = mntget(current->fs->pwdmnt);
 		nd->dentry = dget(current->fs->pwd);
+		read_unlock(&current->fs->lock);
 	} else {
 		struct dentry *dentry;
 
 		file = fget_light(dfd, &fput_needed);
 		retval = -EBADF;
 		if (!file)
-			goto unlock_fail;
+			goto out_fail;
 
 		dentry = file->f_dentry;
 
 		retval = -ENOTDIR;
 		if (!S_ISDIR(dentry->d_inode->i_mode))
-			goto fput_unlock_fail;
+			goto fput_fail;
 
 		retval = file_permission(file, MAY_EXEC);
 		if (retval)
-			goto fput_unlock_fail;
+			goto fput_fail;
 
 		nd->mnt = mntget(file->f_vfsmnt);
 		nd->dentry = dget(dentry);
 
 		fput_light(file, fput_needed);
 	}
-	read_unlock(&current->fs->lock);
 	current->total_link_count = 0;
 	retval = link_path_walk(name, nd);
 out:
@@ -1127,13 +1129,12 @@ out:
 				nd->dentry->d_inode))
 		audit_inode(name, nd->dentry->d_inode, flags);
 	}
+out_fail:
 	return retval;
 
-fput_unlock_fail:
+fput_fail:
 	fput_light(file, fput_needed);
-unlock_fail:
-	read_unlock(&current->fs->lock);
-	return retval;
+	goto out_fail;
 }
 
 int fastcall path_lookup(const char *name, unsigned int flags,
diff --git a/fs/namespace.c b/fs/namespace.c
index 2c5f1f80bdc2..bf478addb852 100644
--- a/fs/namespace.c
+++ b/fs/namespace.c
@@ -899,13 +899,11 @@ static int do_change_type(struct nameidata *nd, int flag)
 /*
  * do loopback mount.
  */
-static int do_loopback(struct nameidata *nd, char *old_name, unsigned long flags, int mnt_flags)
+static int do_loopback(struct nameidata *nd, char *old_name, int recurse)
 {
 	struct nameidata old_nd;
 	struct vfsmount *mnt = NULL;
-	int recurse = flags & MS_REC;
 	int err = mount_is_safe(nd);
-
 	if (err)
 		return err;
 	if (!old_name || !*old_name)
@@ -939,7 +937,6 @@ static int do_loopback(struct nameidata *nd, char *old_name, unsigned long flags
 		spin_unlock(&vfsmount_lock);
 		release_mounts(&umount_list);
 	}
-	mnt->mnt_flags = mnt_flags;
 
 out:
 	up_write(&namespace_sem);
@@ -1353,7 +1350,7 @@ long do_mount(char *dev_name, char *dir_name, char *type_page,
 		retval = do_remount(&nd, flags & ~MS_REMOUNT, mnt_flags,
 				    data_page);
 	else if (flags & MS_BIND)
-		retval = do_loopback(&nd, dev_name, flags, mnt_flags);
+		retval = do_loopback(&nd, dev_name, flags & MS_REC);
 	else if (flags & (MS_SHARED | MS_PRIVATE | MS_SLAVE | MS_UNBINDABLE))
 		retval = do_change_type(&nd, flags);
 	else if (flags & MS_MOVE)
diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c
index a23f34894167..cae74dd4c7f5 100644
--- a/fs/nfs/dir.c
+++ b/fs/nfs/dir.c
@@ -128,15 +128,14 @@ struct inode_operations nfs4_dir_inode_operations = {
 static int
 nfs_opendir(struct inode *inode, struct file *filp)
 {
-	int res = 0;
+	int res;
 
 	dfprintk(VFS, "NFS: opendir(%s/%ld)\n",
 			inode->i_sb->s_id, inode->i_ino);
 
 	lock_kernel();
 	/* Call generic open code in order to cache credentials */
-	if (!res)
-		res = nfs_open(inode, filp);
+	res = nfs_open(inode, filp);
 	unlock_kernel();
 	return res;
 }
diff --git a/fs/nfs/direct.c b/fs/nfs/direct.c
index 0f583cb16ddb..3c72b0c07283 100644
--- a/fs/nfs/direct.c
+++ b/fs/nfs/direct.c
@@ -112,10 +112,9 @@ static void nfs_direct_write_complete(struct nfs_direct_req *dreq, struct inode
  */
 ssize_t nfs_direct_IO(int rw, struct kiocb *iocb, const struct iovec *iov, loff_t pos, unsigned long nr_segs)
 {
-	struct dentry *dentry = iocb->ki_filp->f_dentry;
-
 	dprintk("NFS: nfs_direct_IO (%s) off/no(%Ld/%lu) EINVAL\n",
-			dentry->d_name.name, (long long) pos, nr_segs);
+			iocb->ki_filp->f_dentry->d_name.name,
+			(long long) pos, nr_segs);
 
 	return -EINVAL;
 }
@@ -468,7 +467,6 @@ static const struct rpc_call_ops nfs_commit_direct_ops = {
 static void nfs_direct_commit_schedule(struct nfs_direct_req *dreq)
 {
 	struct nfs_write_data *data = dreq->commit_data;
-	struct rpc_task *task = &data->task;
 
 	data->inode = dreq->inode;
 	data->cred = dreq->ctx->cred;
@@ -489,7 +487,7 @@ static void nfs_direct_commit_schedule(struct nfs_direct_req *dreq)
 	/* Note: task.tk_ops->rpc_release will free dreq->commit_data */
 	dreq->commit_data = NULL;
 
-	dprintk("NFS: %5u initiated commit call\n", task->tk_pid);
+	dprintk("NFS: %5u initiated commit call\n", data->task.tk_pid);
 
 	lock_kernel();
 	rpc_execute(&data->task);
diff --git a/fs/nfs/file.c b/fs/nfs/file.c
index f1df2c8d9259..fade02c15e6e 100644
--- a/fs/nfs/file.c
+++ b/fs/nfs/file.c
@@ -534,10 +534,9 @@ static int nfs_lock(struct file *filp, int cmd, struct file_lock *fl)
  */
 static int nfs_flock(struct file *filp, int cmd, struct file_lock *fl)
 {
-	struct inode * inode = filp->f_mapping->host;
-
 	dprintk("NFS: nfs_flock(f=%s/%ld, t=%x, fl=%x)\n",
-			inode->i_sb->s_id, inode->i_ino,
+			filp->f_dentry->d_inode->i_sb->s_id,
+			filp->f_dentry->d_inode->i_ino,
 			fl->fl_type, fl->fl_flags);
 
 	/*
diff --git a/fs/nfs/inode.c b/fs/nfs/inode.c
index 2f7656b911b6..d0b991a92327 100644
--- a/fs/nfs/inode.c
+++ b/fs/nfs/inode.c
@@ -700,12 +700,9 @@ static int nfs_show_stats(struct seq_file *m, struct vfsmount *mnt)
 	/*
 	 * Display superblock I/O counters
 	 */
-	for (cpu = 0; cpu < NR_CPUS; cpu++) {
+	for_each_possible_cpu(cpu) {
 		struct nfs_iostats *stats;
 
-		if (!cpu_possible(cpu))
-			continue;
-
 		preempt_disable();
 		stats = per_cpu_ptr(nfss->io_stats, cpu);
 
diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c
index 47ece1dd3c67..d86c0db7b1e8 100644
--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -1218,7 +1218,7 @@ out:
 	return status;
 }
 
-static void nfs4_intent_set_file(struct nameidata *nd, struct dentry *dentry, struct nfs4_state *state)
+static int nfs4_intent_set_file(struct nameidata *nd, struct dentry *dentry, struct nfs4_state *state)
 {
 	struct file *filp;
 
@@ -1227,8 +1227,10 @@ static void nfs4_intent_set_file(struct nameidata *nd, struct dentry *dentry, st
 		struct nfs_open_context *ctx;
 		ctx = (struct nfs_open_context *)filp->private_data;
 		ctx->state = state;
-	} else
-		nfs4_close_state(state, nd->intent.open.flags);
+		return 0;
+	}
+	nfs4_close_state(state, nd->intent.open.flags);
+	return PTR_ERR(filp);
 }
 
 struct dentry *
@@ -1835,7 +1837,7 @@ nfs4_proc_create(struct inode *dir, struct dentry *dentry, struct iattr *sattr,
 			nfs_setattr_update_inode(state->inode, sattr);
 	}
 	if (status == 0 && nd != NULL && (nd->flags & LOOKUP_OPEN))
-		nfs4_intent_set_file(nd, dentry, state);
+		status = nfs4_intent_set_file(nd, dentry, state);
 	else
 		nfs4_close_state(state, flags);
 out:
diff --git a/fs/nfsd/export.c b/fs/nfsd/export.c
index 4e0578121d9a..3eec30000f3f 100644
--- a/fs/nfsd/export.c
+++ b/fs/nfsd/export.c
@@ -1066,9 +1066,11 @@ exp_pseudoroot(struct auth_domain *clp, struct svc_fh *fhp,
 		rv = nfserr_perm;
 	else if (IS_ERR(exp))
 		rv = nfserrno(PTR_ERR(exp));
-	else
+	else {
 		rv = fh_compose(fhp, exp,
 				fsid_key->ek_dentry, NULL);
+		exp_put(exp);
+	}
 	cache_put(&fsid_key->h, &svc_expkey_cache);
 	return rv;
 }
diff --git a/fs/nfsd/vfs.c b/fs/nfsd/vfs.c
index 6aa92d0e6876..1d65f13f458c 100644
--- a/fs/nfsd/vfs.c
+++ b/fs/nfsd/vfs.c
@@ -1922,11 +1922,10 @@ nfsd_set_posix_acl(struct svc_fh *fhp, int type, struct posix_acl *acl)
 		value = kmalloc(size, GFP_KERNEL);
 		if (!value)
 			return -ENOMEM;
-		size = posix_acl_to_xattr(acl, value, size);
-		if (size < 0) {
-			error = size;
+		error = posix_acl_to_xattr(acl, value, size);
+		if (error < 0)
 			goto getout;
-		}
+		size = error;
 	} else
 		size = 0;
 
diff --git a/fs/ocfs2/aops.c b/fs/ocfs2/aops.c
index 0d858d0b25be..47152bf9a7f2 100644
--- a/fs/ocfs2/aops.c
+++ b/fs/ocfs2/aops.c
@@ -276,13 +276,29 @@ static int ocfs2_writepage(struct page *page, struct writeback_control *wbc)
 	return ret;
 }
 
+/* This can also be called from ocfs2_write_zero_page() which has done
+ * it's own cluster locking. */
+int ocfs2_prepare_write_nolock(struct inode *inode, struct page *page,
+			       unsigned from, unsigned to)
+{
+	int ret;
+
+	down_read(&OCFS2_I(inode)->ip_alloc_sem);
+
+	ret = block_prepare_write(page, from, to, ocfs2_get_block);
+
+	up_read(&OCFS2_I(inode)->ip_alloc_sem);
+
+	return ret;
+}
+
 /*
  * ocfs2_prepare_write() can be an outer-most ocfs2 call when it is called
  * from loopback.  It must be able to perform its own locking around
  * ocfs2_get_block().
  */
-int ocfs2_prepare_write(struct file *file, struct page *page,
-			unsigned from, unsigned to)
+static int ocfs2_prepare_write(struct file *file, struct page *page,
+			       unsigned from, unsigned to)
 {
 	struct inode *inode = page->mapping->host;
 	int ret;
@@ -295,11 +311,7 @@ int ocfs2_prepare_write(struct file *file, struct page *page,
 		goto out;
 	}
 
-	down_read(&OCFS2_I(inode)->ip_alloc_sem);
-
-	ret = block_prepare_write(page, from, to, ocfs2_get_block);
-
-	up_read(&OCFS2_I(inode)->ip_alloc_sem);
+	ret = ocfs2_prepare_write_nolock(inode, page, from, to);
 
 	ocfs2_meta_unlock(inode, 0);
 out:
@@ -625,11 +637,31 @@ static ssize_t ocfs2_direct_IO(int rw,
 	int ret;
 
 	mlog_entry_void();
+
+	/*
+	 * We get PR data locks even for O_DIRECT.  This allows
+	 * concurrent O_DIRECT I/O but doesn't let O_DIRECT with
+	 * extending and buffered zeroing writes race.  If they did
+	 * race then the buffered zeroing could be written back after
+	 * the O_DIRECT I/O.  It's one thing to tell people not to mix
+	 * buffered and O_DIRECT writes, but expecting them to
+	 * understand that file extension is also an implicit buffered
+	 * write is too much.  By getting the PR we force writeback of
+	 * the buffered zeroing before proceeding.
+	 */
+	ret = ocfs2_data_lock(inode, 0);
+	if (ret < 0) {
+		mlog_errno(ret);
+		goto out;
+	}
+	ocfs2_data_unlock(inode, 0);
+
 	ret = blockdev_direct_IO_no_locking(rw, iocb, inode,
 					    inode->i_sb->s_bdev, iov, offset,
 					    nr_segs, 
 					    ocfs2_direct_IO_get_blocks,
 					    ocfs2_dio_end_io);
+out:
 	mlog_exit(ret);
 	return ret;
 }
diff --git a/fs/ocfs2/aops.h b/fs/ocfs2/aops.h
index d40456d509a0..e88c3f0b8fa9 100644
--- a/fs/ocfs2/aops.h
+++ b/fs/ocfs2/aops.h
@@ -22,8 +22,8 @@
 #ifndef OCFS2_AOPS_H
 #define OCFS2_AOPS_H
 
-int ocfs2_prepare_write(struct file *file, struct page *page,
-			unsigned from, unsigned to);
+int ocfs2_prepare_write_nolock(struct inode *inode, struct page *page,
+			       unsigned from, unsigned to);
 
 struct ocfs2_journal_handle *ocfs2_start_walk_page_trans(struct inode *inode,
 							 struct page *page,
diff --git a/fs/ocfs2/extent_map.c b/fs/ocfs2/extent_map.c
index 4601fc256f11..1a5c69071df6 100644
--- a/fs/ocfs2/extent_map.c
+++ b/fs/ocfs2/extent_map.c
@@ -569,7 +569,7 @@ static int ocfs2_extent_map_insert(struct inode *inode,
 
 	ret = -ENOMEM;
 	ctxt.new_ent = kmem_cache_alloc(ocfs2_em_ent_cachep,
-					GFP_KERNEL);
+					GFP_NOFS);
 	if (!ctxt.new_ent) {
 		mlog_errno(ret);
 		return ret;
@@ -583,14 +583,14 @@ static int ocfs2_extent_map_insert(struct inode *inode,
 		if (ctxt.need_left && !ctxt.left_ent) {
 			ctxt.left_ent =
 				kmem_cache_alloc(ocfs2_em_ent_cachep,
-						 GFP_KERNEL);
+						 GFP_NOFS);
 			if (!ctxt.left_ent)
 				break;
 		}
 		if (ctxt.need_right && !ctxt.right_ent) {
 			ctxt.right_ent =
 				kmem_cache_alloc(ocfs2_em_ent_cachep,
-						 GFP_KERNEL);
+						 GFP_NOFS);
 			if (!ctxt.right_ent)
 				break;
 		}
diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c
index 581eb451a41a..a9559c874530 100644
--- a/fs/ocfs2/file.c
+++ b/fs/ocfs2/file.c
@@ -613,7 +613,8 @@ leave:
 
 /* Some parts of this taken from generic_cont_expand, which turned out
  * to be too fragile to do exactly what we need without us having to
- * worry about recursive locking in ->commit_write(). */
+ * worry about recursive locking in ->prepare_write() and
+ * ->commit_write(). */
 static int ocfs2_write_zero_page(struct inode *inode,
 				 u64 size)
 {
@@ -641,7 +642,7 @@ static int ocfs2_write_zero_page(struct inode *inode,
 		goto out;
 	}
 
-	ret = ocfs2_prepare_write(NULL, page, offset, offset);
+	ret = ocfs2_prepare_write_nolock(inode, page, offset, offset);
 	if (ret < 0) {
 		mlog_errno(ret);
 		goto out_unlock;
@@ -695,13 +696,26 @@ out:
 	return ret;
 }
 
+/* 
+ * A tail_to_skip value > 0 indicates that we're being called from
+ * ocfs2_file_aio_write(). This has the following implications:
+ *
+ * - we don't want to update i_size
+ * - di_bh will be NULL, which is fine because it's only used in the
+ *   case where we want to update i_size.
+ * - ocfs2_zero_extend() will then only be filling the hole created
+ *   between i_size and the start of the write.
+ */
 static int ocfs2_extend_file(struct inode *inode,
 			     struct buffer_head *di_bh,
-			     u64 new_i_size)
+			     u64 new_i_size,
+			     size_t tail_to_skip)
 {
 	int ret = 0;
 	u32 clusters_to_add;
 
+	BUG_ON(!tail_to_skip && !di_bh);
+
 	/* setattr sometimes calls us like this. */
 	if (new_i_size == 0)
 		goto out;
@@ -714,27 +728,44 @@ static int ocfs2_extend_file(struct inode *inode,
 		OCFS2_I(inode)->ip_clusters;
 
 	if (clusters_to_add) {
-		ret = ocfs2_extend_allocation(inode, clusters_to_add);
+		/* 
+		 * protect the pages that ocfs2_zero_extend is going to
+		 * be pulling into the page cache.. we do this before the
+		 * metadata extend so that we don't get into the situation
+		 * where we've extended the metadata but can't get the data
+		 * lock to zero.
+		 */
+		ret = ocfs2_data_lock(inode, 1);
 		if (ret < 0) {
 			mlog_errno(ret);
 			goto out;
 		}
 
-		ret = ocfs2_zero_extend(inode, new_i_size);
+		ret = ocfs2_extend_allocation(inode, clusters_to_add);
 		if (ret < 0) {
 			mlog_errno(ret);
-			goto out;
+			goto out_unlock;
 		}
-	} 
 
-	/* No allocation required, we just use this helper to
-	 * do a trivial update of i_size. */
-	ret = ocfs2_simple_size_update(inode, di_bh, new_i_size);
-	if (ret < 0) {
-		mlog_errno(ret);
-		goto out;
+		ret = ocfs2_zero_extend(inode, (u64)new_i_size - tail_to_skip);
+		if (ret < 0) {
+			mlog_errno(ret);
+			goto out_unlock;
+		}
+	}
+
+	if (!tail_to_skip) {
+		/* We're being called from ocfs2_setattr() which wants
+		 * us to update i_size */
+		ret = ocfs2_simple_size_update(inode, di_bh, new_i_size);
+		if (ret < 0)
+			mlog_errno(ret);
 	}
 
+out_unlock:
+	if (clusters_to_add) /* this is the only case in which we lock */
+		ocfs2_data_unlock(inode, 1);
+
 out:
 	return ret;
 }
@@ -793,7 +824,7 @@ int ocfs2_setattr(struct dentry *dentry, struct iattr *attr)
 		if (i_size_read(inode) > attr->ia_size)
 			status = ocfs2_truncate_file(inode, bh, attr->ia_size);
 		else
-			status = ocfs2_extend_file(inode, bh, attr->ia_size);
+			status = ocfs2_extend_file(inode, bh, attr->ia_size, 0);
 		if (status < 0) {
 			if (status != -ENOSPC)
 				mlog_errno(status);
@@ -1049,21 +1080,12 @@ static ssize_t ocfs2_file_aio_write(struct kiocb *iocb,
 		if (!clusters)
 			break;
 
-		ret = ocfs2_extend_allocation(inode, clusters);
+		ret = ocfs2_extend_file(inode, NULL, newsize, count);
 		if (ret < 0) {
 			if (ret != -ENOSPC)
 				mlog_errno(ret);
 			goto out;
 		}
-
-		/* Fill any holes which would've been created by this
-		 * write. If we're O_APPEND, this will wind up
-		 * (correctly) being a noop. */
-		ret = ocfs2_zero_extend(inode, (u64) newsize - count);
-		if (ret < 0) {
-			mlog_errno(ret);
-			goto out;
-		}
 		break;
 	}
 
@@ -1146,6 +1168,22 @@ static ssize_t ocfs2_file_aio_read(struct kiocb *iocb,
 		ocfs2_iocb_set_rw_locked(iocb);
 	}
 
+	/*
+	 * We're fine letting folks race truncates and extending
+	 * writes with read across the cluster, just like they can
+	 * locally. Hence no rw_lock during read.
+	 * 
+	 * Take and drop the meta data lock to update inode fields
+	 * like i_size. This allows the checks down below
+	 * generic_file_aio_read() a chance of actually working. 
+	 */
+	ret = ocfs2_meta_lock(inode, NULL, NULL, 0);
+	if (ret < 0) {
+		mlog_errno(ret);
+		goto bail;
+	}
+	ocfs2_meta_unlock(inode, 0);
+
 	ret = generic_file_aio_read(iocb, buf, count, iocb->ki_pos);
 	if (ret == -EINVAL)
 		mlog(ML_ERROR, "generic_file_aio_read returned -EINVAL\n");
diff --git a/fs/ocfs2/journal.c b/fs/ocfs2/journal.c
index 6a610ae53583..eebc3cfa6be8 100644
--- a/fs/ocfs2/journal.c
+++ b/fs/ocfs2/journal.c
@@ -117,7 +117,7 @@ struct ocfs2_journal_handle *ocfs2_alloc_handle(struct ocfs2_super *osb)
 {
 	struct ocfs2_journal_handle *retval = NULL;
 
-	retval = kcalloc(1, sizeof(*retval), GFP_KERNEL);
+	retval = kcalloc(1, sizeof(*retval), GFP_NOFS);
 	if (!retval) {
 		mlog(ML_ERROR, "Failed to allocate memory for journal "
 		     "handle!\n");
@@ -870,9 +870,11 @@ static int ocfs2_force_read_journal(struct inode *inode)
 		if (p_blocks > CONCURRENT_JOURNAL_FILL)
 			p_blocks = CONCURRENT_JOURNAL_FILL;
 
+		/* We are reading journal data which should not
+		 * be put in the uptodate cache */
 		status = ocfs2_read_blocks(OCFS2_SB(inode->i_sb),
 					   p_blkno, p_blocks, bhs, 0,
-					   inode);
+					   NULL);
 		if (status < 0) {
 			mlog_errno(status);
 			goto bail;
@@ -982,7 +984,7 @@ static void ocfs2_queue_recovery_completion(struct ocfs2_journal *journal,
 {
 	struct ocfs2_la_recovery_item *item;
 
-	item = kmalloc(sizeof(struct ocfs2_la_recovery_item), GFP_KERNEL);
+	item = kmalloc(sizeof(struct ocfs2_la_recovery_item), GFP_NOFS);
 	if (!item) {
 		/* Though we wish to avoid it, we are in fact safe in
 		 * skipping local alloc cleanup as fsck.ocfs2 is more
diff --git a/fs/ocfs2/uptodate.c b/fs/ocfs2/uptodate.c
index 04a684dfdd96..b8a00a793326 100644
--- a/fs/ocfs2/uptodate.c
+++ b/fs/ocfs2/uptodate.c
@@ -337,7 +337,7 @@ static void __ocfs2_set_buffer_uptodate(struct ocfs2_inode_info *oi,
 	     (unsigned long long)oi->ip_blkno,
 	     (unsigned long long)block, expand_tree);
 
-	new = kmem_cache_alloc(ocfs2_uptodate_cachep, GFP_KERNEL);
+	new = kmem_cache_alloc(ocfs2_uptodate_cachep, GFP_NOFS);
 	if (!new) {
 		mlog_errno(-ENOMEM);
 		return;
@@ -349,7 +349,7 @@ static void __ocfs2_set_buffer_uptodate(struct ocfs2_inode_info *oi,
 		 * has no way of tracking that. */
 		for(i = 0; i < OCFS2_INODE_MAX_CACHE_ARRAY; i++) {
 			tree[i] = kmem_cache_alloc(ocfs2_uptodate_cachep,
-						   GFP_KERNEL);
+						   GFP_NOFS);
 			if (!tree[i]) {
 				mlog_errno(-ENOMEM);
 				goto out_free;
diff --git a/fs/ocfs2/vote.c b/fs/ocfs2/vote.c
index 53049a204197..ee42765a8553 100644
--- a/fs/ocfs2/vote.c
+++ b/fs/ocfs2/vote.c
@@ -586,7 +586,7 @@ static struct ocfs2_net_wait_ctxt *ocfs2_new_net_wait_ctxt(unsigned int response
 {
 	struct ocfs2_net_wait_ctxt *w;
 
-	w = kcalloc(1, sizeof(*w), GFP_KERNEL);
+	w = kcalloc(1, sizeof(*w), GFP_NOFS);
 	if (!w) {
 		mlog_errno(-ENOMEM);
 		goto bail;
@@ -749,7 +749,7 @@ static struct ocfs2_vote_msg * ocfs2_new_vote_request(struct ocfs2_super *osb,
 
 	BUG_ON(!ocfs2_is_valid_vote_request(type));
 
-	request = kcalloc(1, sizeof(*request), GFP_KERNEL);
+	request = kcalloc(1, sizeof(*request), GFP_NOFS);
 	if (!request) {
 		mlog_errno(-ENOMEM);
 	} else {
@@ -1129,7 +1129,7 @@ static int ocfs2_handle_vote_message(struct o2net_msg *msg,
 	struct ocfs2_super *osb = data;
 	struct ocfs2_vote_work *work;
 
-	work = kmalloc(sizeof(struct ocfs2_vote_work), GFP_KERNEL);
+	work = kmalloc(sizeof(struct ocfs2_vote_work), GFP_NOFS);
 	if (!work) {
 		status = -ENOMEM;
 		mlog_errno(status);
diff --git a/fs/open.c b/fs/open.c
index c32c89d6d8db..317b7c7f38a7 100644
--- a/fs/open.c
+++ b/fs/open.c
@@ -331,7 +331,10 @@ out:
 
 asmlinkage long sys_ftruncate(unsigned int fd, unsigned long length)
 {
-	return do_sys_ftruncate(fd, length, 1);
+	long ret = do_sys_ftruncate(fd, length, 1);
+	/* avoid REGPARM breakage on x86: */
+	prevent_tail_call(ret);
+	return ret;
 }
 
 /* LFS versions of truncate are only needed on 32 bit machines */
@@ -343,7 +346,10 @@ asmlinkage long sys_truncate64(const char __user * path, loff_t length)
 
 asmlinkage long sys_ftruncate64(unsigned int fd, loff_t length)
 {
-	return do_sys_ftruncate(fd, length, 0);
+	long ret = do_sys_ftruncate(fd, length, 0);
+	/* avoid REGPARM breakage on x86: */
+	prevent_tail_call(ret);
+	return ret;
 }
 #endif
 
@@ -1093,22 +1099,31 @@ long do_sys_open(int dfd, const char __user *filename, int flags, int mode)
 
 asmlinkage long sys_open(const char __user *filename, int flags, int mode)
 {
+	long ret;
+
 	if (force_o_largefile())
 		flags |= O_LARGEFILE;
 
-	return do_sys_open(AT_FDCWD, filename, flags, mode);
+	ret = do_sys_open(AT_FDCWD, filename, flags, mode);
+	/* avoid REGPARM breakage on x86: */
+	prevent_tail_call(ret);
+	return ret;
 }
 EXPORT_SYMBOL_GPL(sys_open);
 
 asmlinkage long sys_openat(int dfd, const char __user *filename, int flags,
 			   int mode)
 {
+	long ret;
+
 	if (force_o_largefile())
 		flags |= O_LARGEFILE;
 
-	return do_sys_open(dfd, filename, flags, mode);
+	ret = do_sys_open(dfd, filename, flags, mode);
+	/* avoid REGPARM breakage on x86: */
+	prevent_tail_call(ret);
+	return ret;
 }
-EXPORT_SYMBOL_GPL(sys_openat);
 
 #ifndef __alpha__
 
diff --git a/fs/partitions/check.c b/fs/partitions/check.c
index af0cb4b9e784..7ef1f094de91 100644
--- a/fs/partitions/check.c
+++ b/fs/partitions/check.c
@@ -331,7 +331,9 @@ void delete_partition(struct gendisk *disk, int part)
 	devfs_remove("%s/part%d", disk->devfs_name, part);
 	if (p->holder_dir)
 		kobject_unregister(p->holder_dir);
-	kobject_unregister(&p->kobj);
+	kobject_uevent(&p->kobj, KOBJ_REMOVE);
+	kobject_del(&p->kobj);
+	kobject_put(&p->kobj);
 }
 
 void add_partition(struct gendisk *disk, int part, sector_t start, sector_t len)
@@ -357,7 +359,10 @@ void add_partition(struct gendisk *disk, int part, sector_t start, sector_t len)
 		snprintf(p->kobj.name,KOBJ_NAME_LEN,"%s%d",disk->kobj.name,part);
 	p->kobj.parent = &disk->kobj;
 	p->kobj.ktype = &ktype_part;
-	kobject_register(&p->kobj);
+	kobject_init(&p->kobj);
+	kobject_add(&p->kobj);
+	if (!disk->part_uevent_suppress)
+		kobject_uevent(&p->kobj, KOBJ_ADD);
 	partition_sysfs_add_subdir(p);
 	disk->part[part-1] = p;
 }
@@ -367,6 +372,7 @@ static char *make_block_name(struct gendisk *disk)
 	char *name;
 	static char *block_str = "block:";
 	int size;
+	char *s;
 
 	size = strlen(block_str) + strlen(disk->disk_name) + 1;
 	name = kmalloc(size, GFP_KERNEL);
@@ -374,6 +380,10 @@ static char *make_block_name(struct gendisk *disk)
 		return NULL;
 	strcpy(name, block_str);
 	strcat(name, disk->disk_name);
+	/* ewww... some of these buggers have / in name... */
+	s = strchr(name, '/');
+	if (s)
+		*s = '!';
 	return name;
 }
 
@@ -395,6 +405,8 @@ void register_disk(struct gendisk *disk)
 {
 	struct block_device *bdev;
 	char *s;
+	int i;
+	struct hd_struct *p;
 	int err;
 
 	strlcpy(disk->kobj.name,disk->disk_name,KOBJ_NAME_LEN);
@@ -406,13 +418,12 @@ void register_disk(struct gendisk *disk)
 		return;
 	disk_sysfs_symlinks(disk);
  	disk_sysfs_add_subdirs(disk);
-	kobject_uevent(&disk->kobj, KOBJ_ADD);
 
 	/* No minors to use for partitions */
 	if (disk->minors == 1) {
 		if (disk->devfs_name[0] != '\0')
 			devfs_add_disk(disk);
-		return;
+		goto exit;
 	}
 
 	/* always add handle for the whole disk */
@@ -420,16 +431,32 @@ void register_disk(struct gendisk *disk)
 
 	/* No such device (e.g., media were just removed) */
 	if (!get_capacity(disk))
-		return;
+		goto exit;
 
 	bdev = bdget_disk(disk, 0);
 	if (!bdev)
-		return;
+		goto exit;
 
+	/* scan partition table, but suppress uevents */
 	bdev->bd_invalidated = 1;
-	if (blkdev_get(bdev, FMODE_READ, 0) < 0)
-		return;
+	disk->part_uevent_suppress = 1;
+	err = blkdev_get(bdev, FMODE_READ, 0);
+	disk->part_uevent_suppress = 0;
+	if (err < 0)
+		goto exit;
 	blkdev_put(bdev);
+
+exit:
+	/* announce disk after possible partitions are already created */
+	kobject_uevent(&disk->kobj, KOBJ_ADD);
+
+	/* announce possible partitions */
+	for (i = 1; i < disk->minors; i++) {
+		p = disk->part[i-1];
+		if (!p || !p->nr_sects)
+			continue;
+		kobject_uevent(&p->kobj, KOBJ_ADD);
+	}
 }
 
 int rescan_partitions(struct gendisk *disk, struct block_device *bdev)
@@ -506,6 +533,7 @@ void del_gendisk(struct gendisk *disk)
 
 	devfs_remove_disk(disk);
 
+	kobject_uevent(&disk->kobj, KOBJ_REMOVE);
 	if (disk->holder_dir)
 		kobject_unregister(disk->holder_dir);
 	if (disk->slave_dir)
@@ -518,7 +546,7 @@ void del_gendisk(struct gendisk *disk)
 			kfree(disk_name);
 		}
 		put_device(disk->driverfs_dev);
+		disk->driverfs_dev = NULL;
 	}
-	kobject_uevent(&disk->kobj, KOBJ_REMOVE);
 	kobject_del(&disk->kobj);
 }
diff --git a/fs/pipe.c b/fs/pipe.c
index e984beb93a0e..5acd8954aaa0 100644
--- a/fs/pipe.c
+++ b/fs/pipe.c
@@ -55,7 +55,8 @@ void pipe_wait(struct pipe_inode_info *pipe)
 }
 
 static int
-pipe_iov_copy_from_user(void *to, struct iovec *iov, unsigned long len)
+pipe_iov_copy_from_user(void *to, struct iovec *iov, unsigned long len,
+			int atomic)
 {
 	unsigned long copy;
 
@@ -64,8 +65,13 @@ pipe_iov_copy_from_user(void *to, struct iovec *iov, unsigned long len)
 			iov++;
 		copy = min_t(unsigned long, len, iov->iov_len);
 
-		if (copy_from_user(to, iov->iov_base, copy))
-			return -EFAULT;
+		if (atomic) {
+			if (__copy_from_user_inatomic(to, iov->iov_base, copy))
+				return -EFAULT;
+		} else {
+			if (copy_from_user(to, iov->iov_base, copy))
+				return -EFAULT;
+		}
 		to += copy;
 		len -= copy;
 		iov->iov_base += copy;
@@ -75,7 +81,8 @@ pipe_iov_copy_from_user(void *to, struct iovec *iov, unsigned long len)
 }
 
 static int
-pipe_iov_copy_to_user(struct iovec *iov, const void *from, unsigned long len)
+pipe_iov_copy_to_user(struct iovec *iov, const void *from, unsigned long len,
+		      int atomic)
 {
 	unsigned long copy;
 
@@ -84,8 +91,13 @@ pipe_iov_copy_to_user(struct iovec *iov, const void *from, unsigned long len)
 			iov++;
 		copy = min_t(unsigned long, len, iov->iov_len);
 
-		if (copy_to_user(iov->iov_base, from, copy))
-			return -EFAULT;
+		if (atomic) {
+			if (__copy_to_user_inatomic(iov->iov_base, from, copy))
+				return -EFAULT;
+		} else {
+			if (copy_to_user(iov->iov_base, from, copy))
+				return -EFAULT;
+		}
 		from += copy;
 		len -= copy;
 		iov->iov_base += copy;
@@ -94,13 +106,52 @@ pipe_iov_copy_to_user(struct iovec *iov, const void *from, unsigned long len)
 	return 0;
 }
 
+/*
+ * Attempt to pre-fault in the user memory, so we can use atomic copies.
+ * Returns the number of bytes not faulted in.
+ */
+static int iov_fault_in_pages_write(struct iovec *iov, unsigned long len)
+{
+	while (!iov->iov_len)
+		iov++;
+
+	while (len > 0) {
+		unsigned long this_len;
+
+		this_len = min_t(unsigned long, len, iov->iov_len);
+		if (fault_in_pages_writeable(iov->iov_base, this_len))
+			break;
+
+		len -= this_len;
+		iov++;
+	}
+
+	return len;
+}
+
+/*
+ * Pre-fault in the user memory, so we can use atomic copies.
+ */
+static void iov_fault_in_pages_read(struct iovec *iov, unsigned long len)
+{
+	while (!iov->iov_len)
+		iov++;
+
+	while (len > 0) {
+		unsigned long this_len;
+
+		this_len = min_t(unsigned long, len, iov->iov_len);
+		fault_in_pages_readable(iov->iov_base, this_len);
+		len -= this_len;
+		iov++;
+	}
+}
+
 static void anon_pipe_buf_release(struct pipe_inode_info *pipe,
 				  struct pipe_buffer *buf)
 {
 	struct page *page = buf->page;
 
-	buf->flags &= ~PIPE_BUF_FLAG_STOLEN;
-
 	/*
 	 * If nobody else uses this page, and we don't already have a
 	 * temporary page, let's keep track of it as a one-deep
@@ -112,31 +163,58 @@ static void anon_pipe_buf_release(struct pipe_inode_info *pipe,
 		page_cache_release(page);
 }
 
-static void * anon_pipe_buf_map(struct file *file, struct pipe_inode_info *pipe,
-				struct pipe_buffer *buf)
+void *generic_pipe_buf_map(struct pipe_inode_info *pipe,
+			   struct pipe_buffer *buf, int atomic)
 {
+	if (atomic) {
+		buf->flags |= PIPE_BUF_FLAG_ATOMIC;
+		return kmap_atomic(buf->page, KM_USER0);
+	}
+
 	return kmap(buf->page);
 }
 
-static void anon_pipe_buf_unmap(struct pipe_inode_info *pipe,
-				struct pipe_buffer *buf)
+void generic_pipe_buf_unmap(struct pipe_inode_info *pipe,
+			    struct pipe_buffer *buf, void *map_data)
+{
+	if (buf->flags & PIPE_BUF_FLAG_ATOMIC) {
+		buf->flags &= ~PIPE_BUF_FLAG_ATOMIC;
+		kunmap_atomic(map_data, KM_USER0);
+	} else
+		kunmap(buf->page);
+}
+
+int generic_pipe_buf_steal(struct pipe_inode_info *pipe,
+			   struct pipe_buffer *buf)
+{
+	struct page *page = buf->page;
+
+	if (page_count(page) == 1) {
+		lock_page(page);
+		return 0;
+	}
+
+	return 1;
+}
+
+void generic_pipe_buf_get(struct pipe_inode_info *info, struct pipe_buffer *buf)
 {
-	kunmap(buf->page);
+	page_cache_get(buf->page);
 }
 
-static int anon_pipe_buf_steal(struct pipe_inode_info *pipe,
-			       struct pipe_buffer *buf)
+int generic_pipe_buf_pin(struct pipe_inode_info *info, struct pipe_buffer *buf)
 {
-	buf->flags |= PIPE_BUF_FLAG_STOLEN;
 	return 0;
 }
 
 static struct pipe_buf_operations anon_pipe_buf_ops = {
 	.can_merge = 1,
-	.map = anon_pipe_buf_map,
-	.unmap = anon_pipe_buf_unmap,
+	.map = generic_pipe_buf_map,
+	.unmap = generic_pipe_buf_unmap,
+	.pin = generic_pipe_buf_pin,
 	.release = anon_pipe_buf_release,
-	.steal = anon_pipe_buf_steal,
+	.steal = generic_pipe_buf_steal,
+	.get = generic_pipe_buf_get,
 };
 
 static ssize_t
@@ -167,22 +245,33 @@ pipe_readv(struct file *filp, const struct iovec *_iov,
 			struct pipe_buf_operations *ops = buf->ops;
 			void *addr;
 			size_t chars = buf->len;
-			int error;
+			int error, atomic;
 
 			if (chars > total_len)
 				chars = total_len;
 
-			addr = ops->map(filp, pipe, buf);
-			if (IS_ERR(addr)) {
+			error = ops->pin(pipe, buf);
+			if (error) {
 				if (!ret)
-					ret = PTR_ERR(addr);
+					error = ret;
 				break;
 			}
-			error = pipe_iov_copy_to_user(iov, addr + buf->offset, chars);
-			ops->unmap(pipe, buf);
+
+			atomic = !iov_fault_in_pages_write(iov, chars);
+redo:
+			addr = ops->map(pipe, buf, atomic);
+			error = pipe_iov_copy_to_user(iov, addr + buf->offset, chars, atomic);
+			ops->unmap(pipe, buf, addr);
 			if (unlikely(error)) {
+				/*
+				 * Just retry with the slow path if we failed.
+				 */
+				if (atomic) {
+					atomic = 0;
+					goto redo;
+				}
 				if (!ret)
-					ret = -EFAULT;
+					ret = error;
 				break;
 			}
 			ret += chars;
@@ -286,21 +375,28 @@ pipe_writev(struct file *filp, const struct iovec *_iov,
 		int offset = buf->offset + buf->len;
 
 		if (ops->can_merge && offset + chars <= PAGE_SIZE) {
+			int error, atomic = 1;
 			void *addr;
-			int error;
 
-			addr = ops->map(filp, pipe, buf);
-			if (IS_ERR(addr)) {
-				error = PTR_ERR(addr);
+			error = ops->pin(pipe, buf);
+			if (error)
 				goto out;
-			}
+
+			iov_fault_in_pages_read(iov, chars);
+redo1:
+			addr = ops->map(pipe, buf, atomic);
 			error = pipe_iov_copy_from_user(offset + addr, iov,
-							chars);
-			ops->unmap(pipe, buf);
+							chars, atomic);
+			ops->unmap(pipe, buf, addr);
 			ret = error;
 			do_wakeup = 1;
-			if (error)
+			if (error) {
+				if (atomic) {
+					atomic = 0;
+					goto redo1;
+				}
 				goto out;
+			}
 			buf->len += chars;
 			total_len -= chars;
 			ret = chars;
@@ -323,7 +419,8 @@ pipe_writev(struct file *filp, const struct iovec *_iov,
 			int newbuf = (pipe->curbuf + bufs) & (PIPE_BUFFERS-1);
 			struct pipe_buffer *buf = pipe->bufs + newbuf;
 			struct page *page = pipe->tmp_page;
-			int error;
+			char *src;
+			int error, atomic = 1;
 
 			if (!page) {
 				page = alloc_page(GFP_HIGHUSER);
@@ -343,11 +440,27 @@ pipe_writev(struct file *filp, const struct iovec *_iov,
 			if (chars > total_len)
 				chars = total_len;
 
-			error = pipe_iov_copy_from_user(kmap(page), iov, chars);
-			kunmap(page);
+			iov_fault_in_pages_read(iov, chars);
+redo2:
+			if (atomic)
+				src = kmap_atomic(page, KM_USER0);
+			else
+				src = kmap(page);
+
+			error = pipe_iov_copy_from_user(src, iov, chars,
+							atomic);
+			if (atomic)
+				kunmap_atomic(src, KM_USER0);
+			else
+				kunmap(page);
+
 			if (unlikely(error)) {
+				if (atomic) {
+					atomic = 0;
+					goto redo2;
+				}
 				if (!ret)
-					ret = -EFAULT;
+					ret = error;
 				break;
 			}
 			ret += chars;
diff --git a/fs/proc/base.c b/fs/proc/base.c
index a3a3eecef689..6cc77dc3f3ff 100644
--- a/fs/proc/base.c
+++ b/fs/proc/base.c
@@ -297,16 +297,20 @@ static int proc_fd_link(struct inode *inode, struct dentry **dentry, struct vfsm
 
 	files = get_files_struct(task);
 	if (files) {
-		rcu_read_lock();
+		/*
+		 * We are not taking a ref to the file structure, so we must
+		 * hold ->file_lock.
+		 */
+		spin_lock(&files->file_lock);
 		file = fcheck_files(files, fd);
 		if (file) {
 			*mnt = mntget(file->f_vfsmnt);
 			*dentry = dget(file->f_dentry);
-			rcu_read_unlock();
+			spin_unlock(&files->file_lock);
 			put_files_struct(files);
 			return 0;
 		}
-		rcu_read_unlock();
+		spin_unlock(&files->file_lock);
 		put_files_struct(files);
 	}
 	return -ENOENT;
@@ -1523,7 +1527,12 @@ static struct dentry *proc_lookupfd(struct inode * dir, struct dentry * dentry,
 	if (!files)
 		goto out_unlock;
 	inode->i_mode = S_IFLNK;
-	rcu_read_lock();
+
+	/*
+	 * We are not taking a ref to the file structure, so we must
+	 * hold ->file_lock.
+	 */
+	spin_lock(&files->file_lock);
 	file = fcheck_files(files, fd);
 	if (!file)
 		goto out_unlock2;
@@ -1531,7 +1540,7 @@ static struct dentry *proc_lookupfd(struct inode * dir, struct dentry * dentry,
 		inode->i_mode |= S_IRUSR | S_IXUSR;
 	if (file->f_mode & 2)
 		inode->i_mode |= S_IWUSR | S_IXUSR;
-	rcu_read_unlock();
+	spin_unlock(&files->file_lock);
 	put_files_struct(files);
 	inode->i_op = &proc_pid_link_inode_operations;
 	inode->i_size = 64;
@@ -1541,7 +1550,7 @@ static struct dentry *proc_lookupfd(struct inode * dir, struct dentry * dentry,
 	return NULL;
 
 out_unlock2:
-	rcu_read_unlock();
+	spin_unlock(&files->file_lock);
 	put_files_struct(files);
 out_unlock:
 	iput(inode);
diff --git a/fs/reiserfs/xattr_acl.c b/fs/reiserfs/xattr_acl.c
index 58c418fbca2c..97ae1b92bc47 100644
--- a/fs/reiserfs/xattr_acl.c
+++ b/fs/reiserfs/xattr_acl.c
@@ -408,8 +408,9 @@ int reiserfs_cache_default_acl(struct inode *inode)
 		acl = reiserfs_get_acl(inode, ACL_TYPE_DEFAULT);
 		reiserfs_read_unlock_xattrs(inode->i_sb);
 		reiserfs_read_unlock_xattr_i(inode);
-		ret = acl ? 1 : 0;
-		posix_acl_release(acl);
+		ret = (acl && !IS_ERR(acl));
+		if (ret)
+			posix_acl_release(acl);
 	}
 
 	return ret;
diff --git a/fs/smbfs/dir.c b/fs/smbfs/dir.c
index 34c7a11d91f0..70d9c5a37f5a 100644
--- a/fs/smbfs/dir.c
+++ b/fs/smbfs/dir.c
@@ -434,6 +434,11 @@ smb_lookup(struct inode *dir, struct dentry *dentry, struct nameidata *nd)
 	if (dentry->d_name.len > SMB_MAXNAMELEN)
 		goto out;
 
+	/* Do not allow lookup of names with backslashes in */
+	error = -EINVAL;
+	if (memchr(dentry->d_name.name, '\\', dentry->d_name.len))
+		goto out;
+
 	lock_kernel();
 	error = smb_proc_getattr(dentry, &finfo);
 #ifdef SMBFS_PARANOIA
diff --git a/fs/smbfs/request.c b/fs/smbfs/request.c
index c71c375863cc..c71dd2760d32 100644
--- a/fs/smbfs/request.c
+++ b/fs/smbfs/request.c
@@ -339,9 +339,11 @@ int smb_add_request(struct smb_request *req)
 		/*
 		 * On timeout or on interrupt we want to try and remove the
 		 * request from the recvq/xmitq.
+		 * First check if the request is still part of a queue. (May
+		 * have been removed by some error condition)
 		 */
 		smb_lock_server(server);
-		if (!(req->rq_flags & SMB_REQ_RECEIVED)) {
+		if (!list_empty(&req->rq_queue)) {
 			list_del_init(&req->rq_queue);
 			smb_rput(req);
 		}
diff --git a/fs/splice.c b/fs/splice.c
index e50a460239dd..a285fd746dc0 100644
--- a/fs/splice.c
+++ b/fs/splice.c
@@ -27,15 +27,22 @@
 #include <linux/buffer_head.h>
 #include <linux/module.h>
 #include <linux/syscalls.h>
+#include <linux/uio.h>
+
+struct partial_page {
+	unsigned int offset;
+	unsigned int len;
+};
 
 /*
- * Passed to the actors
+ * Passed to splice_to_pipe
  */
-struct splice_desc {
-	unsigned int len, total_len;	/* current and remaining length */
+struct splice_pipe_desc {
+	struct page **pages;		/* page map */
+	struct partial_page *partial;	/* pages[] may not be contig */
+	int nr_pages;			/* number of pages in map */
 	unsigned int flags;		/* splice flags */
-	struct file *file;		/* file to read/write */
-	loff_t pos;			/* file position */
+	struct pipe_buf_operations *ops;/* ops associated with output pipe */
 };
 
 /*
@@ -44,13 +51,14 @@ struct splice_desc {
  * addition of remove_mapping(). If success is returned, the caller may
  * attempt to reuse this page for another destination.
  */
-static int page_cache_pipe_buf_steal(struct pipe_inode_info *info,
+static int page_cache_pipe_buf_steal(struct pipe_inode_info *pipe,
 				     struct pipe_buffer *buf)
 {
 	struct page *page = buf->page;
 	struct address_space *mapping = page_mapping(page);
 
-	WARN_ON(!PageLocked(page));
+	lock_page(page);
+
 	WARN_ON(!PageUptodate(page));
 
 	/*
@@ -65,24 +73,24 @@ static int page_cache_pipe_buf_steal(struct pipe_inode_info *info,
 	if (PagePrivate(page))
 		try_to_release_page(page, mapping_gfp_mask(mapping));
 
-	if (!remove_mapping(mapping, page))
+	if (!remove_mapping(mapping, page)) {
+		unlock_page(page);
 		return 1;
+	}
 
-	buf->flags |= PIPE_BUF_FLAG_STOLEN | PIPE_BUF_FLAG_LRU;
+	buf->flags |= PIPE_BUF_FLAG_LRU;
 	return 0;
 }
 
-static void page_cache_pipe_buf_release(struct pipe_inode_info *info,
+static void page_cache_pipe_buf_release(struct pipe_inode_info *pipe,
 					struct pipe_buffer *buf)
 {
 	page_cache_release(buf->page);
-	buf->page = NULL;
-	buf->flags &= ~(PIPE_BUF_FLAG_STOLEN | PIPE_BUF_FLAG_LRU);
+	buf->flags &= ~PIPE_BUF_FLAG_LRU;
 }
 
-static void *page_cache_pipe_buf_map(struct file *file,
-				     struct pipe_inode_info *info,
-				     struct pipe_buffer *buf)
+static int page_cache_pipe_buf_pin(struct pipe_inode_info *pipe,
+				   struct pipe_buffer *buf)
 {
 	struct page *page = buf->page;
 	int err;
@@ -108,44 +116,59 @@ static void *page_cache_pipe_buf_map(struct file *file,
 		}
 
 		/*
-		 * Page is ok afterall, fall through to mapping.
+		 * Page is ok afterall, we are done.
 		 */
 		unlock_page(page);
 	}
 
-	return kmap(page);
+	return 0;
 error:
 	unlock_page(page);
-	return ERR_PTR(err);
+	return err;
 }
 
-static void page_cache_pipe_buf_unmap(struct pipe_inode_info *info,
-				      struct pipe_buffer *buf)
+static struct pipe_buf_operations page_cache_pipe_buf_ops = {
+	.can_merge = 0,
+	.map = generic_pipe_buf_map,
+	.unmap = generic_pipe_buf_unmap,
+	.pin = page_cache_pipe_buf_pin,
+	.release = page_cache_pipe_buf_release,
+	.steal = page_cache_pipe_buf_steal,
+	.get = generic_pipe_buf_get,
+};
+
+static int user_page_pipe_buf_steal(struct pipe_inode_info *pipe,
+				    struct pipe_buffer *buf)
 {
-	kunmap(buf->page);
+	if (!(buf->flags & PIPE_BUF_FLAG_GIFT))
+		return 1;
+
+	buf->flags |= PIPE_BUF_FLAG_LRU;
+	return generic_pipe_buf_steal(pipe, buf);
 }
 
-static struct pipe_buf_operations page_cache_pipe_buf_ops = {
+static struct pipe_buf_operations user_page_pipe_buf_ops = {
 	.can_merge = 0,
-	.map = page_cache_pipe_buf_map,
-	.unmap = page_cache_pipe_buf_unmap,
+	.map = generic_pipe_buf_map,
+	.unmap = generic_pipe_buf_unmap,
+	.pin = generic_pipe_buf_pin,
 	.release = page_cache_pipe_buf_release,
-	.steal = page_cache_pipe_buf_steal,
+	.steal = user_page_pipe_buf_steal,
+	.get = generic_pipe_buf_get,
 };
 
 /*
  * Pipe output worker. This sets up our pipe format with the page cache
  * pipe buffer operations. Otherwise very similar to the regular pipe_writev().
  */
-static ssize_t move_to_pipe(struct pipe_inode_info *pipe, struct page **pages,
-			    int nr_pages, unsigned long offset,
-			    unsigned long len, unsigned int flags)
+static ssize_t splice_to_pipe(struct pipe_inode_info *pipe,
+			      struct splice_pipe_desc *spd)
 {
-	int ret, do_wakeup, i;
+	int ret, do_wakeup, page_nr;
 
 	ret = 0;
 	do_wakeup = 0;
-	i = 0;
+	page_nr = 0;
 
 	if (pipe->inode)
 		mutex_lock(&pipe->inode->i_mutex);
@@ -161,27 +184,22 @@ static ssize_t move_to_pipe(struct pipe_inode_info *pipe, struct page **pages,
 		if (pipe->nrbufs < PIPE_BUFFERS) {
 			int newbuf = (pipe->curbuf + pipe->nrbufs) & (PIPE_BUFFERS - 1);
 			struct pipe_buffer *buf = pipe->bufs + newbuf;
-			struct page *page = pages[i++];
-			unsigned long this_len;
 
-			this_len = PAGE_CACHE_SIZE - offset;
-			if (this_len > len)
-				this_len = len;
+			buf->page = spd->pages[page_nr];
+			buf->offset = spd->partial[page_nr].offset;
+			buf->len = spd->partial[page_nr].len;
+			buf->ops = spd->ops;
+			if (spd->flags & SPLICE_F_GIFT)
+				buf->flags |= PIPE_BUF_FLAG_GIFT;
 
-			buf->page = page;
-			buf->offset = offset;
-			buf->len = this_len;
-			buf->ops = &page_cache_pipe_buf_ops;
 			pipe->nrbufs++;
+			page_nr++;
+			ret += buf->len;
+
 			if (pipe->inode)
 				do_wakeup = 1;
 
-			ret += this_len;
-			len -= this_len;
-			offset = 0;
-			if (!--nr_pages)
-				break;
-			if (!len)
+			if (!--spd->nr_pages)
 				break;
 			if (pipe->nrbufs < PIPE_BUFFERS)
 				continue;
@@ -189,7 +207,7 @@ static ssize_t move_to_pipe(struct pipe_inode_info *pipe, struct page **pages,
 			break;
 		}
 
-		if (flags & SPLICE_F_NONBLOCK) {
+		if (spd->flags & SPLICE_F_NONBLOCK) {
 			if (!ret)
 				ret = -EAGAIN;
 			break;
@@ -224,26 +242,36 @@ static ssize_t move_to_pipe(struct pipe_inode_info *pipe, struct page **pages,
 		kill_fasync(&pipe->fasync_readers, SIGIO, POLL_IN);
 	}
 
-	while (i < nr_pages)
-		page_cache_release(pages[i++]);
+	while (page_nr < spd->nr_pages)
+		page_cache_release(spd->pages[page_nr++]);
 
 	return ret;
 }
 
 static int
-__generic_file_splice_read(struct file *in, struct pipe_inode_info *pipe,
-			   size_t len, unsigned int flags)
+__generic_file_splice_read(struct file *in, loff_t *ppos,
+			   struct pipe_inode_info *pipe, size_t len,
+			   unsigned int flags)
 {
 	struct address_space *mapping = in->f_mapping;
-	unsigned int offset, nr_pages;
+	unsigned int loff, nr_pages;
 	struct page *pages[PIPE_BUFFERS];
+	struct partial_page partial[PIPE_BUFFERS];
 	struct page *page;
-	pgoff_t index;
-	int i, error;
-
-	index = in->f_pos >> PAGE_CACHE_SHIFT;
-	offset = in->f_pos & ~PAGE_CACHE_MASK;
-	nr_pages = (len + offset + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT;
+	pgoff_t index, end_index;
+	loff_t isize;
+	size_t total_len;
+	int error, page_nr;
+	struct splice_pipe_desc spd = {
+		.pages = pages,
+		.partial = partial,
+		.flags = flags,
+		.ops = &page_cache_pipe_buf_ops,
+	};
+
+	index = *ppos >> PAGE_CACHE_SHIFT;
+	loff = *ppos & ~PAGE_CACHE_MASK;
+	nr_pages = (len + loff + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT;
 
 	if (nr_pages > PIPE_BUFFERS)
 		nr_pages = PIPE_BUFFERS;
@@ -253,49 +281,94 @@ __generic_file_splice_read(struct file *in, struct pipe_inode_info *pipe,
 	 * read-ahead if this is a non-zero offset (we are likely doing small
 	 * chunk splice and the page is already there) for a single page.
 	 */
-	if (!offset || nr_pages > 1)
-		do_page_cache_readahead(mapping, in, index, nr_pages);
+	if (!loff || nr_pages > 1)
+		page_cache_readahead(mapping, &in->f_ra, in, index, nr_pages);
 
 	/*
 	 * Now fill in the holes:
 	 */
 	error = 0;
-	for (i = 0; i < nr_pages; i++, index++) {
-find_page:
+	total_len = 0;
+
+	/*
+	 * Lookup the (hopefully) full range of pages we need.
+	 */
+	spd.nr_pages = find_get_pages_contig(mapping, index, nr_pages, pages);
+
+	/*
+	 * If find_get_pages_contig() returned fewer pages than we needed,
+	 * allocate the rest.
+	 */
+	index += spd.nr_pages;
+	while (spd.nr_pages < nr_pages) {
 		/*
-		 * lookup the page for this index
+		 * Page could be there, find_get_pages_contig() breaks on
+		 * the first hole.
 		 */
 		page = find_get_page(mapping, index);
 		if (!page) {
 			/*
-			 * If in nonblock mode then dont block on
-			 * readpage (we've kicked readahead so there
-			 * will be asynchronous progress):
+			 * Make sure the read-ahead engine is notified
+			 * about this failure.
 			 */
-			if (flags & SPLICE_F_NONBLOCK)
-				break;
+			handle_ra_miss(mapping, &in->f_ra, index);
 
 			/*
-			 * page didn't exist, allocate one
+			 * page didn't exist, allocate one.
 			 */
 			page = page_cache_alloc_cold(mapping);
 			if (!page)
 				break;
 
 			error = add_to_page_cache_lru(page, mapping, index,
-						mapping_gfp_mask(mapping));
+					      mapping_gfp_mask(mapping));
 			if (unlikely(error)) {
 				page_cache_release(page);
+				if (error == -EEXIST)
+					continue;
 				break;
 			}
-
-			goto readpage;
+			/*
+			 * add_to_page_cache() locks the page, unlock it
+			 * to avoid convoluting the logic below even more.
+			 */
+			unlock_page(page);
 		}
 
+		pages[spd.nr_pages++] = page;
+		index++;
+	}
+
+	/*
+	 * Now loop over the map and see if we need to start IO on any
+	 * pages, fill in the partial map, etc.
+	 */
+	index = *ppos >> PAGE_CACHE_SHIFT;
+	nr_pages = spd.nr_pages;
+	spd.nr_pages = 0;
+	for (page_nr = 0; page_nr < nr_pages; page_nr++) {
+		unsigned int this_len;
+
+		if (!len)
+			break;
+
+		/*
+		 * this_len is the max we'll use from this page
+		 */
+		this_len = min_t(unsigned long, len, PAGE_CACHE_SIZE - loff);
+		page = pages[page_nr];
+
 		/*
 		 * If the page isn't uptodate, we may need to start io on it
 		 */
 		if (!PageUptodate(page)) {
+			/*
+			 * If in nonblock mode then dont block on waiting
+			 * for an in-flight io page
+			 */
+			if (flags & SPLICE_F_NONBLOCK)
+				break;
+
 			lock_page(page);
 
 			/*
@@ -305,7 +378,6 @@ find_page:
 			 */
 			if (!page->mapping) {
 				unlock_page(page);
-				page_cache_release(page);
 				break;
 			}
 			/*
@@ -316,25 +388,66 @@ find_page:
 				goto fill_it;
 			}
 
-readpage:
 			/*
 			 * need to read in the page
 			 */
 			error = mapping->a_ops->readpage(in, page);
-
 			if (unlikely(error)) {
-				page_cache_release(page);
+				/*
+				 * We really should re-lookup the page here,
+				 * but it complicates things a lot. Instead
+				 * lets just do what we already stored, and
+				 * we'll get it the next time we are called.
+				 */
 				if (error == AOP_TRUNCATED_PAGE)
-					goto find_page;
+					error = 0;
+
 				break;
 			}
+
+			/*
+			 * i_size must be checked after ->readpage().
+			 */
+			isize = i_size_read(mapping->host);
+			end_index = (isize - 1) >> PAGE_CACHE_SHIFT;
+			if (unlikely(!isize || index > end_index))
+				break;
+
+			/*
+			 * if this is the last page, see if we need to shrink
+			 * the length and stop
+			 */
+			if (end_index == index) {
+				loff = PAGE_CACHE_SIZE - (isize & ~PAGE_CACHE_MASK);
+				if (total_len + loff > isize)
+					break;
+				/*
+				 * force quit after adding this page
+				 */
+				len = this_len;
+				this_len = min(this_len, loff);
+				loff = 0;
+			}
 		}
 fill_it:
-		pages[i] = page;
+		partial[page_nr].offset = loff;
+		partial[page_nr].len = this_len;
+		len -= this_len;
+		total_len += this_len;
+		loff = 0;
+		spd.nr_pages++;
+		index++;
 	}
 
-	if (i)
-		return move_to_pipe(pipe, pages, i, offset, len, flags);
+	/*
+	 * Release any pages at the end, if we quit early. 'i' is how far
+	 * we got, 'nr_pages' is how many pages are in the map.
+	 */
+	while (page_nr < nr_pages)
+		page_cache_release(pages[page_nr++]);
+
+	if (spd.nr_pages)
+		return splice_to_pipe(pipe, &spd);
 
 	return error;
 }
@@ -348,8 +461,9 @@ fill_it:
  *
  * Will read pages from given file and fill them into a pipe.
  */
-ssize_t generic_file_splice_read(struct file *in, struct pipe_inode_info *pipe,
-				 size_t len, unsigned int flags)
+ssize_t generic_file_splice_read(struct file *in, loff_t *ppos,
+				 struct pipe_inode_info *pipe, size_t len,
+				 unsigned int flags)
 {
 	ssize_t spliced;
 	int ret;
@@ -358,19 +472,22 @@ ssize_t generic_file_splice_read(struct file *in, struct pipe_inode_info *pipe,
 	spliced = 0;
 
 	while (len) {
-		ret = __generic_file_splice_read(in, pipe, len, flags);
+		ret = __generic_file_splice_read(in, ppos, pipe, len, flags);
 
-		if (ret <= 0)
+		if (ret < 0)
 			break;
+		else if (!ret) {
+			if (spliced)
+				break;
+			if (flags & SPLICE_F_NONBLOCK) {
+				ret = -EAGAIN;
+				break;
+			}
+		}
 
-		in->f_pos += ret;
+		*ppos += ret;
 		len -= ret;
 		spliced += ret;
-
-		if (!(flags & SPLICE_F_NONBLOCK))
-			continue;
-		ret = -EAGAIN;
-		break;
 	}
 
 	if (spliced)
@@ -383,38 +500,24 @@ EXPORT_SYMBOL(generic_file_splice_read);
 
 /*
  * Send 'sd->len' bytes to socket from 'sd->file' at position 'sd->pos'
- * using sendpage().
+ * using sendpage(). Return the number of bytes sent.
  */
-static int pipe_to_sendpage(struct pipe_inode_info *info,
+static int pipe_to_sendpage(struct pipe_inode_info *pipe,
 			    struct pipe_buffer *buf, struct splice_desc *sd)
 {
 	struct file *file = sd->file;
 	loff_t pos = sd->pos;
-	unsigned int offset;
-	ssize_t ret;
-	void *ptr;
-	int more;
-
-	/*
-	 * Sub-optimal, but we are limited by the pipe ->map. We don't
-	 * need a kmap'ed buffer here, we just want to make sure we
-	 * have the page pinned if the pipe page originates from the
-	 * page cache.
-	 */
-	ptr = buf->ops->map(file, info, buf);
-	if (IS_ERR(ptr))
-		return PTR_ERR(ptr);
+	int ret, more;
 
-	offset = pos & ~PAGE_CACHE_MASK;
-	more = (sd->flags & SPLICE_F_MORE) || sd->len < sd->total_len;
+	ret = buf->ops->pin(pipe, buf);
+	if (!ret) {
+		more = (sd->flags & SPLICE_F_MORE) || sd->len < sd->total_len;
 
-	ret = file->f_op->sendpage(file, buf->page, offset, sd->len, &pos,more);
-
-	buf->ops->unmap(info, buf);
-	if (ret == sd->len)
-		return 0;
+		ret = file->f_op->sendpage(file, buf->page, buf->offset,
+					   sd->len, &pos, more);
+	}
 
-	return -EIO;
+	return ret;
 }
 
 /*
@@ -437,62 +540,80 @@ static int pipe_to_sendpage(struct pipe_inode_info *info,
  * SPLICE_F_MOVE isn't set, or we cannot move the page, we simply create
  * a new page in the output file page cache and fill/dirty that.
  */
-static int pipe_to_file(struct pipe_inode_info *info, struct pipe_buffer *buf,
+static int pipe_to_file(struct pipe_inode_info *pipe, struct pipe_buffer *buf,
 			struct splice_desc *sd)
 {
 	struct file *file = sd->file;
 	struct address_space *mapping = file->f_mapping;
 	gfp_t gfp_mask = mapping_gfp_mask(mapping);
-	unsigned int offset;
+	unsigned int offset, this_len;
 	struct page *page;
 	pgoff_t index;
-	char *src;
 	int ret;
 
 	/*
 	 * make sure the data in this buffer is uptodate
 	 */
-	src = buf->ops->map(file, info, buf);
-	if (IS_ERR(src))
-		return PTR_ERR(src);
+	ret = buf->ops->pin(pipe, buf);
+	if (unlikely(ret))
+		return ret;
 
 	index = sd->pos >> PAGE_CACHE_SHIFT;
 	offset = sd->pos & ~PAGE_CACHE_MASK;
 
+	this_len = sd->len;
+	if (this_len + offset > PAGE_CACHE_SIZE)
+		this_len = PAGE_CACHE_SIZE - offset;
+
 	/*
-	 * Reuse buf page, if SPLICE_F_MOVE is set.
+	 * Reuse buf page, if SPLICE_F_MOVE is set and we are doing a full
+	 * page.
 	 */
-	if (sd->flags & SPLICE_F_MOVE) {
+	if ((sd->flags & SPLICE_F_MOVE) && this_len == PAGE_CACHE_SIZE) {
 		/*
-		 * If steal succeeds, buf->page is now pruned from the vm
-		 * side (LRU and page cache) and we can reuse it.
+		 * If steal succeeds, buf->page is now pruned from the
+		 * pagecache and we can reuse it. The page will also be
+		 * locked on successful return.
 		 */
-		if (buf->ops->steal(info, buf))
+		if (buf->ops->steal(pipe, buf))
 			goto find_page;
 
-		/*
-		 * this will also set the page locked
-		 */
 		page = buf->page;
-		if (add_to_page_cache(page, mapping, index, gfp_mask))
+		if (add_to_page_cache(page, mapping, index, gfp_mask)) {
+			unlock_page(page);
 			goto find_page;
+		}
+
+		page_cache_get(page);
 
 		if (!(buf->flags & PIPE_BUF_FLAG_LRU))
 			lru_cache_add(page);
 	} else {
 find_page:
-		ret = -ENOMEM;
-		page = find_or_create_page(mapping, index, gfp_mask);
-		if (!page)
-			goto out_nomem;
+		page = find_lock_page(mapping, index);
+		if (!page) {
+			ret = -ENOMEM;
+			page = page_cache_alloc_cold(mapping);
+			if (unlikely(!page))
+				goto out_nomem;
+
+			/*
+			 * This will also lock the page
+			 */
+			ret = add_to_page_cache_lru(page, mapping, index,
+						    gfp_mask);
+			if (unlikely(ret))
+				goto out;
+		}
 
 		/*
-		 * If the page is uptodate, it is also locked. If it isn't
-		 * uptodate, we can mark it uptodate if we are filling the
-		 * full page. Otherwise we need to read it in first...
+		 * We get here with the page locked. If the page is also
+		 * uptodate, we don't need to do more. If it isn't, we
+		 * may need to bring it in if we are not going to overwrite
+		 * the full page.
 		 */
 		if (!PageUptodate(page)) {
-			if (sd->len < PAGE_CACHE_SIZE) {
+			if (this_len < PAGE_CACHE_SIZE) {
 				ret = mapping->a_ops->readpage(file, page);
 				if (unlikely(ret))
 					goto out;
@@ -511,58 +632,72 @@ find_page:
 					ret = -EIO;
 					goto out;
 				}
-			} else {
-				WARN_ON(!PageLocked(page));
+			} else
 				SetPageUptodate(page);
-			}
 		}
 	}
 
-	ret = mapping->a_ops->prepare_write(file, page, 0, sd->len);
-	if (ret == AOP_TRUNCATED_PAGE) {
+	ret = mapping->a_ops->prepare_write(file, page, offset, offset+this_len);
+	if (unlikely(ret)) {
+		loff_t isize = i_size_read(mapping->host);
+
+		if (ret != AOP_TRUNCATED_PAGE)
+			unlock_page(page);
 		page_cache_release(page);
-		goto find_page;
-	} else if (ret)
+		if (ret == AOP_TRUNCATED_PAGE)
+			goto find_page;
+
+		/*
+		 * prepare_write() may have instantiated a few blocks
+		 * outside i_size.  Trim these off again.
+		 */
+		if (sd->pos + this_len > isize)
+			vmtruncate(mapping->host, isize);
+
 		goto out;
+	}
 
-	if (!(buf->flags & PIPE_BUF_FLAG_STOLEN)) {
-		char *dst = kmap_atomic(page, KM_USER0);
+	if (buf->page != page) {
+		/*
+		 * Careful, ->map() uses KM_USER0!
+		 */
+		char *src = buf->ops->map(pipe, buf, 1);
+		char *dst = kmap_atomic(page, KM_USER1);
 
-		memcpy(dst + offset, src + buf->offset, sd->len);
+		memcpy(dst + offset, src + buf->offset, this_len);
 		flush_dcache_page(page);
-		kunmap_atomic(dst, KM_USER0);
+		kunmap_atomic(dst, KM_USER1);
+		buf->ops->unmap(pipe, buf, src);
 	}
 
-	ret = mapping->a_ops->commit_write(file, page, 0, sd->len);
-	if (ret == AOP_TRUNCATED_PAGE) {
+	ret = mapping->a_ops->commit_write(file, page, offset, offset+this_len);
+	if (!ret) {
+		/*
+		 * Return the number of bytes written and mark page as
+		 * accessed, we are now done!
+		 */
+		ret = this_len;
+		mark_page_accessed(page);
+		balance_dirty_pages_ratelimited(mapping);
+	} else if (ret == AOP_TRUNCATED_PAGE) {
 		page_cache_release(page);
 		goto find_page;
-	} else if (ret)
-		goto out;
-
-	mark_page_accessed(page);
-	balance_dirty_pages_ratelimited(mapping);
-out:
-	if (!(buf->flags & PIPE_BUF_FLAG_STOLEN)) {
-		page_cache_release(page);
-		unlock_page(page);
 	}
+out:
+	page_cache_release(page);
+	unlock_page(page);
 out_nomem:
-	buf->ops->unmap(info, buf);
 	return ret;
 }
 
-typedef int (splice_actor)(struct pipe_inode_info *, struct pipe_buffer *,
-			   struct splice_desc *);
-
 /*
  * Pipe input worker. Most of this logic works like a regular pipe, the
  * key here is the 'actor' worker passed in that actually moves the data
  * to the wanted destination. See pipe_to_file/pipe_to_sendpage above.
  */
-static ssize_t move_from_pipe(struct pipe_inode_info *pipe, struct file *out,
-			      size_t len, unsigned int flags,
-			      splice_actor *actor)
+ssize_t splice_from_pipe(struct pipe_inode_info *pipe, struct file *out,
+			 loff_t *ppos, size_t len, unsigned int flags,
+			 splice_actor *actor)
 {
 	int ret, do_wakeup, err;
 	struct splice_desc sd;
@@ -573,7 +708,7 @@ static ssize_t move_from_pipe(struct pipe_inode_info *pipe, struct file *out,
 	sd.total_len = len;
 	sd.flags = flags;
 	sd.file = out;
-	sd.pos = out->f_pos;
+	sd.pos = *ppos;
 
 	if (pipe->inode)
 		mutex_lock(&pipe->inode->i_mutex);
@@ -588,16 +723,22 @@ static ssize_t move_from_pipe(struct pipe_inode_info *pipe, struct file *out,
 				sd.len = sd.total_len;
 
 			err = actor(pipe, buf, &sd);
-			if (err) {
+			if (err <= 0) {
 				if (!ret && err != -ENODATA)
 					ret = err;
 
 				break;
 			}
 
-			ret += sd.len;
-			buf->offset += sd.len;
-			buf->len -= sd.len;
+			ret += err;
+			buf->offset += err;
+			buf->len -= err;
+
+			sd.len -= err;
+			sd.pos += err;
+			sd.total_len -= err;
+			if (sd.len)
+				continue;
 
 			if (!buf->len) {
 				buf->ops = NULL;
@@ -608,8 +749,6 @@ static ssize_t move_from_pipe(struct pipe_inode_info *pipe, struct file *out,
 					do_wakeup = 1;
 			}
 
-			sd.pos += sd.len;
-			sd.total_len -= sd.len;
 			if (!sd.total_len)
 				break;
 		}
@@ -656,9 +795,7 @@ static ssize_t move_from_pipe(struct pipe_inode_info *pipe, struct file *out,
 		kill_fasync(&pipe->fasync_writers, SIGIO, POLL_OUT);
 	}
 
-	out->f_pos = sd.pos;
 	return ret;
-
 }
 
 /**
@@ -674,28 +811,32 @@ static ssize_t move_from_pipe(struct pipe_inode_info *pipe, struct file *out,
  */
 ssize_t
 generic_file_splice_write(struct pipe_inode_info *pipe, struct file *out,
-			  size_t len, unsigned int flags)
+			  loff_t *ppos, size_t len, unsigned int flags)
 {
 	struct address_space *mapping = out->f_mapping;
 	ssize_t ret;
 
-	ret = move_from_pipe(pipe, out, len, flags, pipe_to_file);
-
-	/*
-	 * If file or inode is SYNC and we actually wrote some data, sync it.
-	 */
-	if (unlikely((out->f_flags & O_SYNC) || IS_SYNC(mapping->host))
-	    && ret > 0) {
+	ret = splice_from_pipe(pipe, out, ppos, len, flags, pipe_to_file);
+	if (ret > 0) {
 		struct inode *inode = mapping->host;
-		int err;
 
-		mutex_lock(&inode->i_mutex);
-		err = generic_osync_inode(mapping->host, mapping,
-					  OSYNC_METADATA|OSYNC_DATA);
-		mutex_unlock(&inode->i_mutex);
+		*ppos += ret;
 
-		if (err)
-			ret = err;
+		/*
+		 * If file or inode is SYNC and we actually wrote some data,
+		 * sync it.
+		 */
+		if (unlikely((out->f_flags & O_SYNC) || IS_SYNC(inode))) {
+			int err;
+
+			mutex_lock(&inode->i_mutex);
+			err = generic_osync_inode(inode, mapping,
+						  OSYNC_METADATA|OSYNC_DATA);
+			mutex_unlock(&inode->i_mutex);
+
+			if (err)
+				ret = err;
+		}
 	}
 
 	return ret;
@@ -715,9 +856,9 @@ EXPORT_SYMBOL(generic_file_splice_write);
  *
  */
 ssize_t generic_splice_sendpage(struct pipe_inode_info *pipe, struct file *out,
-				size_t len, unsigned int flags)
+				loff_t *ppos, size_t len, unsigned int flags)
 {
-	return move_from_pipe(pipe, out, len, flags, pipe_to_sendpage);
+	return splice_from_pipe(pipe, out, ppos, len, flags, pipe_to_sendpage);
 }
 
 EXPORT_SYMBOL(generic_splice_sendpage);
@@ -726,9 +867,8 @@ EXPORT_SYMBOL(generic_splice_sendpage);
  * Attempt to initiate a splice from pipe to file.
  */
 static long do_splice_from(struct pipe_inode_info *pipe, struct file *out,
-			   size_t len, unsigned int flags)
+			   loff_t *ppos, size_t len, unsigned int flags)
 {
-	loff_t pos;
 	int ret;
 
 	if (unlikely(!out->f_op || !out->f_op->splice_write))
@@ -737,22 +877,21 @@ static long do_splice_from(struct pipe_inode_info *pipe, struct file *out,
 	if (unlikely(!(out->f_mode & FMODE_WRITE)))
 		return -EBADF;
 
-	pos = out->f_pos;
-
-	ret = rw_verify_area(WRITE, out, &pos, len);
+	ret = rw_verify_area(WRITE, out, ppos, len);
 	if (unlikely(ret < 0))
 		return ret;
 
-	return out->f_op->splice_write(pipe, out, len, flags);
+	return out->f_op->splice_write(pipe, out, ppos, len, flags);
 }
 
 /*
  * Attempt to initiate a splice from a file to a pipe.
  */
-static long do_splice_to(struct file *in, struct pipe_inode_info *pipe,
-			 size_t len, unsigned int flags)
+static long do_splice_to(struct file *in, loff_t *ppos,
+			 struct pipe_inode_info *pipe, size_t len,
+			 unsigned int flags)
 {
-	loff_t pos, isize, left;
+	loff_t isize, left;
 	int ret;
 
 	if (unlikely(!in->f_op || !in->f_op->splice_read))
@@ -761,28 +900,27 @@ static long do_splice_to(struct file *in, struct pipe_inode_info *pipe,
 	if (unlikely(!(in->f_mode & FMODE_READ)))
 		return -EBADF;
 
-	pos = in->f_pos;
-
-	ret = rw_verify_area(READ, in, &pos, len);
+	ret = rw_verify_area(READ, in, ppos, len);
 	if (unlikely(ret < 0))
 		return ret;
 
 	isize = i_size_read(in->f_mapping->host);
-	if (unlikely(in->f_pos >= isize))
+	if (unlikely(*ppos >= isize))
 		return 0;
 	
-	left = isize - in->f_pos;
+	left = isize - *ppos;
 	if (unlikely(left < len))
 		len = left;
 
-	return in->f_op->splice_read(in, pipe, len, flags);
+	return in->f_op->splice_read(in, ppos, pipe, len, flags);
 }
 
-long do_splice_direct(struct file *in, struct file *out, size_t len,
-		      unsigned int flags)
+long do_splice_direct(struct file *in, loff_t *ppos, struct file *out,
+		      size_t len, unsigned int flags)
 {
 	struct pipe_inode_info *pipe;
 	long ret, bytes;
+	loff_t out_off;
 	umode_t i_mode;
 	int i;
 
@@ -807,7 +945,7 @@ long do_splice_direct(struct file *in, struct file *out, size_t len,
 
 		/*
 		 * We don't have an immediate reader, but we'll read the stuff
-		 * out of the pipe right after the move_to_pipe(). So set
+		 * out of the pipe right after the splice_to_pipe(). So set
 		 * PIPE_READERS appropriately.
 		 */
 		pipe->readers = 1;
@@ -820,6 +958,7 @@ long do_splice_direct(struct file *in, struct file *out, size_t len,
 	 */
 	ret = 0;
 	bytes = 0;
+	out_off = 0;
 
 	while (len) {
 		size_t read_len, max_read_len;
@@ -829,7 +968,7 @@ long do_splice_direct(struct file *in, struct file *out, size_t len,
 		 */
 		max_read_len = min(len, (size_t)(PIPE_BUFFERS*PAGE_SIZE));
 
-		ret = do_splice_to(in, pipe, max_read_len, flags);
+		ret = do_splice_to(in, ppos, pipe, max_read_len, flags);
 		if (unlikely(ret < 0))
 			goto out_release;
 
@@ -840,7 +979,7 @@ long do_splice_direct(struct file *in, struct file *out, size_t len,
 		 * must not do the output in nonblocking mode as then we
 		 * could get stuck data in the internal pipe:
 		 */
-		ret = do_splice_from(pipe, out, read_len,
+		ret = do_splice_from(pipe, out, &out_off, read_len,
 				     flags & ~SPLICE_F_NONBLOCK);
 		if (unlikely(ret < 0))
 			goto out_release;
@@ -898,6 +1037,8 @@ static long do_splice(struct file *in, loff_t __user *off_in,
 		      size_t len, unsigned int flags)
 {
 	struct pipe_inode_info *pipe;
+	loff_t offset, *off;
+	long ret;
 
 	pipe = in->f_dentry->d_inode->i_pipe;
 	if (pipe) {
@@ -906,12 +1047,18 @@ static long do_splice(struct file *in, loff_t __user *off_in,
 		if (off_out) {
 			if (out->f_op->llseek == no_llseek)
 				return -EINVAL;
-			if (copy_from_user(&out->f_pos, off_out,
-					   sizeof(loff_t)))
+			if (copy_from_user(&offset, off_out, sizeof(loff_t)))
 				return -EFAULT;
-		}
+			off = &offset;
+		} else
+			off = &out->f_pos;
 
-		return do_splice_from(pipe, out, len, flags);
+		ret = do_splice_from(pipe, out, off, len, flags);
+
+		if (off_out && copy_to_user(off_out, off, sizeof(loff_t)))
+			ret = -EFAULT;
+
+		return ret;
 	}
 
 	pipe = out->f_dentry->d_inode->i_pipe;
@@ -921,16 +1068,201 @@ static long do_splice(struct file *in, loff_t __user *off_in,
 		if (off_in) {
 			if (in->f_op->llseek == no_llseek)
 				return -EINVAL;
-			if (copy_from_user(&in->f_pos, off_in, sizeof(loff_t)))
+			if (copy_from_user(&offset, off_in, sizeof(loff_t)))
 				return -EFAULT;
-		}
+			off = &offset;
+		} else
+			off = &in->f_pos;
 
-		return do_splice_to(in, pipe, len, flags);
+		ret = do_splice_to(in, off, pipe, len, flags);
+
+		if (off_in && copy_to_user(off_in, off, sizeof(loff_t)))
+			ret = -EFAULT;
+
+		return ret;
 	}
 
 	return -EINVAL;
 }
 
+/*
+ * Map an iov into an array of pages and offset/length tupples. With the
+ * partial_page structure, we can map several non-contiguous ranges into
+ * our ones pages[] map instead of splitting that operation into pieces.
+ * Could easily be exported as a generic helper for other users, in which
+ * case one would probably want to add a 'max_nr_pages' parameter as well.
+ */
+static int get_iovec_page_array(const struct iovec __user *iov,
+				unsigned int nr_vecs, struct page **pages,
+				struct partial_page *partial, int aligned)
+{
+	int buffers = 0, error = 0;
+
+	/*
+	 * It's ok to take the mmap_sem for reading, even
+	 * across a "get_user()".
+	 */
+	down_read(&current->mm->mmap_sem);
+
+	while (nr_vecs) {
+		unsigned long off, npages;
+		void __user *base;
+		size_t len;
+		int i;
+
+		/*
+		 * Get user address base and length for this iovec.
+		 */
+		error = get_user(base, &iov->iov_base);
+		if (unlikely(error))
+			break;
+		error = get_user(len, &iov->iov_len);
+		if (unlikely(error))
+			break;
+
+		/*
+		 * Sanity check this iovec. 0 read succeeds.
+		 */
+		if (unlikely(!len))
+			break;
+		error = -EFAULT;
+		if (unlikely(!base))
+			break;
+
+		/*
+		 * Get this base offset and number of pages, then map
+		 * in the user pages.
+		 */
+		off = (unsigned long) base & ~PAGE_MASK;
+
+		/*
+		 * If asked for alignment, the offset must be zero and the
+		 * length a multiple of the PAGE_SIZE.
+		 */
+		error = -EINVAL;
+		if (aligned && (off || len & ~PAGE_MASK))
+			break;
+
+		npages = (off + len + PAGE_SIZE - 1) >> PAGE_SHIFT;
+		if (npages > PIPE_BUFFERS - buffers)
+			npages = PIPE_BUFFERS - buffers;
+
+		error = get_user_pages(current, current->mm,
+				       (unsigned long) base, npages, 0, 0,
+				       &pages[buffers], NULL);
+
+		if (unlikely(error <= 0))
+			break;
+
+		/*
+		 * Fill this contiguous range into the partial page map.
+		 */
+		for (i = 0; i < error; i++) {
+			const int plen = min_t(size_t, len, PAGE_SIZE - off);
+
+			partial[buffers].offset = off;
+			partial[buffers].len = plen;
+
+			off = 0;
+			len -= plen;
+			buffers++;
+		}
+
+		/*
+		 * We didn't complete this iov, stop here since it probably
+		 * means we have to move some of this into a pipe to
+		 * be able to continue.
+		 */
+		if (len)
+			break;
+
+		/*
+		 * Don't continue if we mapped fewer pages than we asked for,
+		 * or if we mapped the max number of pages that we have
+		 * room for.
+		 */
+		if (error < npages || buffers == PIPE_BUFFERS)
+			break;
+
+		nr_vecs--;
+		iov++;
+	}
+
+	up_read(&current->mm->mmap_sem);
+
+	if (buffers)
+		return buffers;
+
+	return error;
+}
+
+/*
+ * vmsplice splices a user address range into a pipe. It can be thought of
+ * as splice-from-memory, where the regular splice is splice-from-file (or
+ * to file). In both cases the output is a pipe, naturally.
+ *
+ * Note that vmsplice only supports splicing _from_ user memory to a pipe,
+ * not the other way around. Splicing from user memory is a simple operation
+ * that can be supported without any funky alignment restrictions or nasty
+ * vm tricks. We simply map in the user memory and fill them into a pipe.
+ * The reverse isn't quite as easy, though. There are two possible solutions
+ * for that:
+ *
+ *	- memcpy() the data internally, at which point we might as well just
+ *	  do a regular read() on the buffer anyway.
+ *	- Lots of nasty vm tricks, that are neither fast nor flexible (it
+ *	  has restriction limitations on both ends of the pipe).
+ *
+ * Alas, it isn't here.
+ *
+ */
+static long do_vmsplice(struct file *file, const struct iovec __user *iov,
+			unsigned long nr_segs, unsigned int flags)
+{
+	struct pipe_inode_info *pipe = file->f_dentry->d_inode->i_pipe;
+	struct page *pages[PIPE_BUFFERS];
+	struct partial_page partial[PIPE_BUFFERS];
+	struct splice_pipe_desc spd = {
+		.pages = pages,
+		.partial = partial,
+		.flags = flags,
+		.ops = &user_page_pipe_buf_ops,
+	};
+
+	if (unlikely(!pipe))
+		return -EBADF;
+	if (unlikely(nr_segs > UIO_MAXIOV))
+		return -EINVAL;
+	else if (unlikely(!nr_segs))
+		return 0;
+
+	spd.nr_pages = get_iovec_page_array(iov, nr_segs, pages, partial,
+					    flags & SPLICE_F_GIFT);
+	if (spd.nr_pages <= 0)
+		return spd.nr_pages;
+
+	return splice_to_pipe(pipe, &spd);
+}
+
+asmlinkage long sys_vmsplice(int fd, const struct iovec __user *iov,
+			     unsigned long nr_segs, unsigned int flags)
+{
+	struct file *file;
+	long error;
+	int fput;
+
+	error = -EBADF;
+	file = fget_light(fd, &fput);
+	if (file) {
+		if (file->f_mode & FMODE_WRITE)
+			error = do_vmsplice(file, iov, nr_segs, flags);
+
+		fput_light(file, fput);
+	}
+
+	return error;
+}
+
 asmlinkage long sys_splice(int fd_in, loff_t __user *off_in,
 			   int fd_out, loff_t __user *off_out,
 			   size_t len, unsigned int flags)
@@ -961,3 +1293,198 @@ asmlinkage long sys_splice(int fd_in, loff_t __user *off_in,
 
 	return error;
 }
+
+/*
+ * Link contents of ipipe to opipe.
+ */
+static int link_pipe(struct pipe_inode_info *ipipe,
+		     struct pipe_inode_info *opipe,
+		     size_t len, unsigned int flags)
+{
+	struct pipe_buffer *ibuf, *obuf;
+	int ret, do_wakeup, i, ipipe_first;
+
+	ret = do_wakeup = ipipe_first = 0;
+
+	/*
+	 * Potential ABBA deadlock, work around it by ordering lock
+	 * grabbing by inode address. Otherwise two different processes
+	 * could deadlock (one doing tee from A -> B, the other from B -> A).
+	 */
+	if (ipipe->inode < opipe->inode) {
+		ipipe_first = 1;
+		mutex_lock(&ipipe->inode->i_mutex);
+		mutex_lock(&opipe->inode->i_mutex);
+	} else {
+		mutex_lock(&opipe->inode->i_mutex);
+		mutex_lock(&ipipe->inode->i_mutex);
+	}
+
+	for (i = 0;; i++) {
+		if (!opipe->readers) {
+			send_sig(SIGPIPE, current, 0);
+			if (!ret)
+				ret = -EPIPE;
+			break;
+		}
+		if (ipipe->nrbufs - i) {
+			ibuf = ipipe->bufs + ((ipipe->curbuf + i) & (PIPE_BUFFERS - 1));
+
+			/*
+			 * If we have room, fill this buffer
+			 */
+			if (opipe->nrbufs < PIPE_BUFFERS) {
+				int nbuf = (opipe->curbuf + opipe->nrbufs) & (PIPE_BUFFERS - 1);
+
+				/*
+				 * Get a reference to this pipe buffer,
+				 * so we can copy the contents over.
+				 */
+				ibuf->ops->get(ipipe, ibuf);
+
+				obuf = opipe->bufs + nbuf;
+				*obuf = *ibuf;
+
+				/*
+				 * Don't inherit the gift flag, we need to
+				 * prevent multiple steals of this page.
+				 */
+				obuf->flags &= ~PIPE_BUF_FLAG_GIFT;
+
+				if (obuf->len > len)
+					obuf->len = len;
+
+				opipe->nrbufs++;
+				do_wakeup = 1;
+				ret += obuf->len;
+				len -= obuf->len;
+
+				if (!len)
+					break;
+				if (opipe->nrbufs < PIPE_BUFFERS)
+					continue;
+			}
+
+			/*
+			 * We have input available, but no output room.
+			 * If we already copied data, return that. If we
+			 * need to drop the opipe lock, it must be ordered
+			 * last to avoid deadlocks.
+			 */
+			if ((flags & SPLICE_F_NONBLOCK) || !ipipe_first) {
+				if (!ret)
+					ret = -EAGAIN;
+				break;
+			}
+			if (signal_pending(current)) {
+				if (!ret)
+					ret = -ERESTARTSYS;
+				break;
+			}
+			if (do_wakeup) {
+				smp_mb();
+				if (waitqueue_active(&opipe->wait))
+					wake_up_interruptible(&opipe->wait);
+				kill_fasync(&opipe->fasync_readers, SIGIO, POLL_IN);
+				do_wakeup = 0;
+			}
+
+			opipe->waiting_writers++;
+			pipe_wait(opipe);
+			opipe->waiting_writers--;
+			continue;
+		}
+
+		/*
+		 * No input buffers, do the usual checks for available
+		 * writers and blocking and wait if necessary
+		 */
+		if (!ipipe->writers)
+			break;
+		if (!ipipe->waiting_writers) {
+			if (ret)
+				break;
+		}
+		/*
+		 * pipe_wait() drops the ipipe mutex. To avoid deadlocks
+		 * with another process, we can only safely do that if
+		 * the ipipe lock is ordered last.
+		 */
+		if ((flags & SPLICE_F_NONBLOCK) || ipipe_first) {
+			if (!ret)
+				ret = -EAGAIN;
+			break;
+		}
+		if (signal_pending(current)) {
+			if (!ret)
+				ret = -ERESTARTSYS;
+			break;
+		}
+
+		if (waitqueue_active(&ipipe->wait))
+			wake_up_interruptible_sync(&ipipe->wait);
+		kill_fasync(&ipipe->fasync_writers, SIGIO, POLL_OUT);
+
+		pipe_wait(ipipe);
+	}
+
+	mutex_unlock(&ipipe->inode->i_mutex);
+	mutex_unlock(&opipe->inode->i_mutex);
+
+	if (do_wakeup) {
+		smp_mb();
+		if (waitqueue_active(&opipe->wait))
+			wake_up_interruptible(&opipe->wait);
+		kill_fasync(&opipe->fasync_readers, SIGIO, POLL_IN);
+	}
+
+	return ret;
+}
+
+/*
+ * This is a tee(1) implementation that works on pipes. It doesn't copy
+ * any data, it simply references the 'in' pages on the 'out' pipe.
+ * The 'flags' used are the SPLICE_F_* variants, currently the only
+ * applicable one is SPLICE_F_NONBLOCK.
+ */
+static long do_tee(struct file *in, struct file *out, size_t len,
+		   unsigned int flags)
+{
+	struct pipe_inode_info *ipipe = in->f_dentry->d_inode->i_pipe;
+	struct pipe_inode_info *opipe = out->f_dentry->d_inode->i_pipe;
+
+	/*
+	 * Link ipipe to the two output pipes, consuming as we go along.
+	 */
+	if (ipipe && opipe)
+		return link_pipe(ipipe, opipe, len, flags);
+
+	return -EINVAL;
+}
+
+asmlinkage long sys_tee(int fdin, int fdout, size_t len, unsigned int flags)
+{
+	struct file *in;
+	int error, fput_in;
+
+	if (unlikely(!len))
+		return 0;
+
+	error = -EBADF;
+	in = fget_light(fdin, &fput_in);
+	if (in) {
+		if (in->f_mode & FMODE_READ) {
+			int fput_out;
+			struct file *out = fget_light(fdout, &fput_out);
+
+			if (out) {
+				if (out->f_mode & FMODE_WRITE)
+					error = do_tee(in, out, len, flags);
+				fput_light(out, fput_out);
+			}
+		}
+ 		fput_light(in, fput_in);
+ 	}
+
+	return error;
+}
diff --git a/fs/stat.c b/fs/stat.c
index 9948cc1685a4..0f282face322 100644
--- a/fs/stat.c
+++ b/fs/stat.c
@@ -261,7 +261,7 @@ asmlinkage long sys_newlstat(char __user *filename, struct stat __user *statbuf)
 	return error;
 }
 
-#ifndef __ARCH_WANT_STAT64
+#if !defined(__ARCH_WANT_STAT64) || defined(__ARCH_WANT_SYS_NEWFSTATAT)
 asmlinkage long sys_newfstatat(int dfd, char __user *filename,
 				struct stat __user *statbuf, int flag)
 {
diff --git a/fs/sysfs/dir.c b/fs/sysfs/dir.c
index 6cfdc9a87772..610b5bdbe75b 100644
--- a/fs/sysfs/dir.c
+++ b/fs/sysfs/dir.c
@@ -43,6 +43,7 @@ static struct sysfs_dirent * sysfs_new_dirent(struct sysfs_dirent * parent_sd,
 
 	memset(sd, 0, sizeof(*sd));
 	atomic_set(&sd->s_count, 1);
+	atomic_set(&sd->s_event, 0);
 	INIT_LIST_HEAD(&sd->s_children);
 	list_add(&sd->s_sibling, &parent_sd->s_children);
 	sd->s_element = element;
diff --git a/fs/sysfs/file.c b/fs/sysfs/file.c
index f1cb1ddde511..cf3786625bfa 100644
--- a/fs/sysfs/file.c
+++ b/fs/sysfs/file.c
@@ -6,6 +6,7 @@
 #include <linux/fsnotify.h>
 #include <linux/kobject.h>
 #include <linux/namei.h>
+#include <linux/poll.h>
 #include <asm/uaccess.h>
 #include <asm/semaphore.h>
 
@@ -57,6 +58,7 @@ struct sysfs_buffer {
 	struct sysfs_ops	* ops;
 	struct semaphore	sem;
 	int			needs_read_fill;
+	int			event;
 };
 
 
@@ -72,6 +74,7 @@ struct sysfs_buffer {
  */
 static int fill_read_buffer(struct dentry * dentry, struct sysfs_buffer * buffer)
 {
+	struct sysfs_dirent * sd = dentry->d_fsdata;
 	struct attribute * attr = to_attr(dentry);
 	struct kobject * kobj = to_kobj(dentry->d_parent);
 	struct sysfs_ops * ops = buffer->ops;
@@ -83,6 +86,7 @@ static int fill_read_buffer(struct dentry * dentry, struct sysfs_buffer * buffer
 	if (!buffer->page)
 		return -ENOMEM;
 
+	buffer->event = atomic_read(&sd->s_event);
 	count = ops->show(kobj,attr,buffer->page);
 	buffer->needs_read_fill = 0;
 	BUG_ON(count > (ssize_t)PAGE_SIZE);
@@ -348,12 +352,84 @@ static int sysfs_release(struct inode * inode, struct file * filp)
 	return 0;
 }
 
+/* Sysfs attribute files are pollable.  The idea is that you read
+ * the content and then you use 'poll' or 'select' to wait for
+ * the content to change.  When the content changes (assuming the
+ * manager for the kobject supports notification), poll will
+ * return POLLERR|POLLPRI, and select will return the fd whether
+ * it is waiting for read, write, or exceptions.
+ * Once poll/select indicates that the value has changed, you
+ * need to close and re-open the file, as simply seeking and reading
+ * again will not get new data, or reset the state of 'poll'.
+ * Reminder: this only works for attributes which actively support
+ * it, and it is not possible to test an attribute from userspace
+ * to see if it supports poll (Nether 'poll' or 'select' return
+ * an appropriate error code).  When in doubt, set a suitable timeout value.
+ */
+static unsigned int sysfs_poll(struct file *filp, poll_table *wait)
+{
+	struct sysfs_buffer * buffer = filp->private_data;
+	struct kobject * kobj = to_kobj(filp->f_dentry->d_parent);
+	struct sysfs_dirent * sd = filp->f_dentry->d_fsdata;
+	int res = 0;
+
+	poll_wait(filp, &kobj->poll, wait);
+
+	if (buffer->event != atomic_read(&sd->s_event)) {
+		res = POLLERR|POLLPRI;
+		buffer->needs_read_fill = 1;
+	}
+
+	return res;
+}
+
+
+static struct dentry *step_down(struct dentry *dir, const char * name)
+{
+	struct dentry * de;
+
+	if (dir == NULL || dir->d_inode == NULL)
+		return NULL;
+
+	mutex_lock(&dir->d_inode->i_mutex);
+	de = lookup_one_len(name, dir, strlen(name));
+	mutex_unlock(&dir->d_inode->i_mutex);
+	dput(dir);
+	if (IS_ERR(de))
+		return NULL;
+	if (de->d_inode == NULL) {
+		dput(de);
+		return NULL;
+	}
+	return de;
+}
+
+void sysfs_notify(struct kobject * k, char *dir, char *attr)
+{
+	struct dentry *de = k->dentry;
+	if (de)
+		dget(de);
+	if (de && dir)
+		de = step_down(de, dir);
+	if (de && attr)
+		de = step_down(de, attr);
+	if (de) {
+		struct sysfs_dirent * sd = de->d_fsdata;
+		if (sd)
+			atomic_inc(&sd->s_event);
+		wake_up_interruptible(&k->poll);
+		dput(de);
+	}
+}
+EXPORT_SYMBOL_GPL(sysfs_notify);
+
 const struct file_operations sysfs_file_operations = {
 	.read		= sysfs_read_file,
 	.write		= sysfs_write_file,
 	.llseek		= generic_file_llseek,
 	.open		= sysfs_open_file,
 	.release	= sysfs_release,
+	.poll		= sysfs_poll,
 };
 
 
diff --git a/fs/sysfs/sysfs.h b/fs/sysfs/sysfs.h
index 32958a7c50e9..3651ffb5ec09 100644
--- a/fs/sysfs/sysfs.h
+++ b/fs/sysfs/sysfs.h
@@ -11,6 +11,7 @@ extern int sysfs_make_dirent(struct sysfs_dirent *, struct dentry *, void *,
 
 extern int sysfs_add_file(struct dentry *, const struct attribute *, int);
 extern void sysfs_hash_and_remove(struct dentry * dir, const char * name);
+extern struct sysfs_dirent *sysfs_find(struct sysfs_dirent *dir, const char * name);
 
 extern int sysfs_create_subdir(struct kobject *, const char *, struct dentry **);
 extern void sysfs_remove_subdir(struct dentry *);
diff --git a/fs/xfs/linux-2.6/xfs_file.c b/fs/xfs/linux-2.6/xfs_file.c
index 269721af02f3..c847416f6d10 100644
--- a/fs/xfs/linux-2.6/xfs_file.c
+++ b/fs/xfs/linux-2.6/xfs_file.c
@@ -252,6 +252,7 @@ xfs_file_sendfile_invis(
 STATIC ssize_t
 xfs_file_splice_read(
 	struct file		*infilp,
+	loff_t			*ppos,
 	struct pipe_inode_info	*pipe,
 	size_t			len,
 	unsigned int		flags)
@@ -259,13 +260,14 @@ xfs_file_splice_read(
 	vnode_t			*vp = vn_from_inode(infilp->f_dentry->d_inode);
 	ssize_t			rval;
 
-	VOP_SPLICE_READ(vp, infilp, pipe, len, flags, 0, NULL, rval);
+	VOP_SPLICE_READ(vp, infilp, ppos, pipe, len, flags, 0, NULL, rval);
 	return rval;
 }
 
 STATIC ssize_t
 xfs_file_splice_read_invis(
 	struct file		*infilp,
+	loff_t			*ppos,
 	struct pipe_inode_info	*pipe,
 	size_t			len,
 	unsigned int		flags)
@@ -273,7 +275,7 @@ xfs_file_splice_read_invis(
 	vnode_t			*vp = vn_from_inode(infilp->f_dentry->d_inode);
 	ssize_t			rval;
 
-	VOP_SPLICE_READ(vp, infilp, pipe, len, flags, IO_INVIS, NULL, rval);
+	VOP_SPLICE_READ(vp, infilp, ppos, pipe, len, flags, IO_INVIS, NULL, rval);
 	return rval;
 }
 
@@ -281,13 +283,14 @@ STATIC ssize_t
 xfs_file_splice_write(
 	struct pipe_inode_info	*pipe,
 	struct file		*outfilp,
+	loff_t			*ppos,
 	size_t			len,
 	unsigned int		flags)
 {
 	vnode_t			*vp = vn_from_inode(outfilp->f_dentry->d_inode);
 	ssize_t			rval;
 
-	VOP_SPLICE_WRITE(vp, pipe, outfilp, len, flags, 0, NULL, rval);
+	VOP_SPLICE_WRITE(vp, pipe, outfilp, ppos, len, flags, 0, NULL, rval);
 	return rval;
 }
 
@@ -295,13 +298,14 @@ STATIC ssize_t
 xfs_file_splice_write_invis(
 	struct pipe_inode_info	*pipe,
 	struct file		*outfilp,
+	loff_t			*ppos,
 	size_t			len,
 	unsigned int		flags)
 {
 	vnode_t			*vp = vn_from_inode(outfilp->f_dentry->d_inode);
 	ssize_t			rval;
 
-	VOP_SPLICE_WRITE(vp, pipe, outfilp, len, flags, IO_INVIS, NULL, rval);
+	VOP_SPLICE_WRITE(vp, pipe, outfilp, ppos, len, flags, IO_INVIS, NULL, rval);
 	return rval;
 }
 
diff --git a/fs/xfs/linux-2.6/xfs_lrw.c b/fs/xfs/linux-2.6/xfs_lrw.c
index 74a52937f208..67efe3308980 100644
--- a/fs/xfs/linux-2.6/xfs_lrw.c
+++ b/fs/xfs/linux-2.6/xfs_lrw.c
@@ -338,6 +338,7 @@ ssize_t
 xfs_splice_read(
 	bhv_desc_t		*bdp,
 	struct file		*infilp,
+	loff_t			*ppos,
 	struct pipe_inode_info	*pipe,
 	size_t			count,
 	int			flags,
@@ -360,7 +361,7 @@ xfs_splice_read(
 		int error;
 
 		error = XFS_SEND_DATA(mp, DM_EVENT_READ, BHV_TO_VNODE(bdp),
-					infilp->f_pos, count,
+					*ppos, count,
 					FILP_DELAY_FLAG(infilp), &locktype);
 		if (error) {
 			xfs_iunlock(ip, XFS_IOLOCK_SHARED);
@@ -368,8 +369,8 @@ xfs_splice_read(
 		}
 	}
 	xfs_rw_enter_trace(XFS_SPLICE_READ_ENTER, &ip->i_iocore,
-			   pipe, count, infilp->f_pos, ioflags);
-	ret = generic_file_splice_read(infilp, pipe, count, flags);
+			   pipe, count, *ppos, ioflags);
+	ret = generic_file_splice_read(infilp, ppos, pipe, count, flags);
 	if (ret > 0)
 		XFS_STATS_ADD(xs_read_bytes, ret);
 
@@ -382,6 +383,7 @@ xfs_splice_write(
 	bhv_desc_t		*bdp,
 	struct pipe_inode_info	*pipe,
 	struct file		*outfilp,
+	loff_t			*ppos,
 	size_t			count,
 	int			flags,
 	int			ioflags,
@@ -403,7 +405,7 @@ xfs_splice_write(
 		int error;
 
 		error = XFS_SEND_DATA(mp, DM_EVENT_WRITE, BHV_TO_VNODE(bdp),
-					outfilp->f_pos, count,
+					*ppos, count,
 					FILP_DELAY_FLAG(outfilp), &locktype);
 		if (error) {
 			xfs_iunlock(ip, XFS_IOLOCK_EXCL);
@@ -411,8 +413,8 @@ xfs_splice_write(
 		}
 	}
 	xfs_rw_enter_trace(XFS_SPLICE_WRITE_ENTER, &ip->i_iocore,
-			   pipe, count, outfilp->f_pos, ioflags);
-	ret = generic_file_splice_write(pipe, outfilp, count, flags);
+			   pipe, count, *ppos, ioflags);
+	ret = generic_file_splice_write(pipe, outfilp, ppos, count, flags);
 	if (ret > 0)
 		XFS_STATS_ADD(xs_write_bytes, ret);
 
diff --git a/fs/xfs/linux-2.6/xfs_lrw.h b/fs/xfs/linux-2.6/xfs_lrw.h
index 55c689a86ad2..8f4539952350 100644
--- a/fs/xfs/linux-2.6/xfs_lrw.h
+++ b/fs/xfs/linux-2.6/xfs_lrw.h
@@ -93,11 +93,11 @@ extern ssize_t xfs_write(struct bhv_desc *, struct kiocb *,
 extern ssize_t xfs_sendfile(struct bhv_desc *, struct file *,
 				loff_t *, int, size_t, read_actor_t,
 				void *, struct cred *);
-extern ssize_t xfs_splice_read(struct bhv_desc *, struct file *,
+extern ssize_t xfs_splice_read(struct bhv_desc *, struct file *, loff_t *,
 				struct pipe_inode_info *, size_t, int, int,
 				struct cred *);
 extern ssize_t xfs_splice_write(struct bhv_desc *, struct pipe_inode_info *,
-				struct file *, size_t, int, int,
+				struct file *, loff_t *, size_t, int, int,
 				struct cred *);
 
 #endif	/* __XFS_LRW_H__ */
diff --git a/fs/xfs/linux-2.6/xfs_vnode.h b/fs/xfs/linux-2.6/xfs_vnode.h
index 88b09f186289..2a8e16c22353 100644
--- a/fs/xfs/linux-2.6/xfs_vnode.h
+++ b/fs/xfs/linux-2.6/xfs_vnode.h
@@ -173,11 +173,11 @@ typedef ssize_t (*vop_write_t)(bhv_desc_t *, struct kiocb *,
 typedef ssize_t (*vop_sendfile_t)(bhv_desc_t *, struct file *,
 				loff_t *, int, size_t, read_actor_t,
 				void *, struct cred *);
-typedef ssize_t (*vop_splice_read_t)(bhv_desc_t *, struct file *,
+typedef ssize_t (*vop_splice_read_t)(bhv_desc_t *, struct file *, loff_t *,
 				struct pipe_inode_info *, size_t, int, int,
 				struct cred *);
 typedef ssize_t (*vop_splice_write_t)(bhv_desc_t *, struct pipe_inode_info *,
-				struct file *, size_t, int, int,
+				struct file *, loff_t *, size_t, int, int,
 				struct cred *);
 typedef int	(*vop_ioctl_t)(bhv_desc_t *, struct inode *, struct file *,
 				int, unsigned int, void __user *);
@@ -284,10 +284,10 @@ typedef struct vnodeops {
 	rv = _VOP_(vop_write, vp)((vp)->v_fbhv,file,iov,segs,offset,ioflags,cr)
 #define VOP_SENDFILE(vp,f,off,ioflags,cnt,act,targ,cr,rv)		\
 	rv = _VOP_(vop_sendfile, vp)((vp)->v_fbhv,f,off,ioflags,cnt,act,targ,cr)
-#define VOP_SPLICE_READ(vp,f,pipe,cnt,fl,iofl,cr,rv)			\
-	rv = _VOP_(vop_splice_read, vp)((vp)->v_fbhv,f,pipe,cnt,fl,iofl,cr)
-#define VOP_SPLICE_WRITE(vp,f,pipe,cnt,fl,iofl,cr,rv)			\
-	rv = _VOP_(vop_splice_write, vp)((vp)->v_fbhv,f,pipe,cnt,fl,iofl,cr)
+#define VOP_SPLICE_READ(vp,f,o,pipe,cnt,fl,iofl,cr,rv)			\
+	rv = _VOP_(vop_splice_read, vp)((vp)->v_fbhv,f,o,pipe,cnt,fl,iofl,cr)
+#define VOP_SPLICE_WRITE(vp,f,o,pipe,cnt,fl,iofl,cr,rv)			\
+	rv = _VOP_(vop_splice_write, vp)((vp)->v_fbhv,f,o,pipe,cnt,fl,iofl,cr)
 #define VOP_BMAP(vp,of,sz,rw,b,n,rv)					\
 	rv = _VOP_(vop_bmap, vp)((vp)->v_fbhv,of,sz,rw,b,n)
 #define VOP_OPEN(vp, cr, rv)						\
diff --git a/fs/xfs/xfs_alloc.c b/fs/xfs/xfs_alloc.c
index 64ee07db0d5e..8558226281c4 100644
--- a/fs/xfs/xfs_alloc.c
+++ b/fs/xfs/xfs_alloc.c
@@ -1942,8 +1942,10 @@ xfs_alloc_fix_freelist(
 		/*
 		 * Allocate as many blocks as possible at once.
 		 */
-		if ((error = xfs_alloc_ag_vextent(&targs)))
+		if ((error = xfs_alloc_ag_vextent(&targs))) {
+			xfs_trans_brelse(tp, agflbp);
 			return error;
+		}
 		/*
 		 * Stop if we run out.  Won't happen if callers are obeying
 		 * the restrictions correctly.  Can happen for free calls
@@ -1960,6 +1962,7 @@ xfs_alloc_fix_freelist(
 				return error;
 		}
 	}
+	xfs_trans_brelse(tp, agflbp);
 	args->agbp = agbp;
 	return 0;
 }
diff --git a/fs/xfs/xfs_rename.c b/fs/xfs/xfs_rename.c
index 81a05cfd77d2..1f148762eb28 100644
--- a/fs/xfs/xfs_rename.c
+++ b/fs/xfs/xfs_rename.c
@@ -316,6 +316,18 @@ xfs_rename(
 		}
 	}
 
+	/*
+	 * If we are using project inheritance, we only allow renames
+	 * into our tree when the project IDs are the same; else the
+	 * tree quota mechanism would be circumvented.
+	 */
+	if (unlikely((target_dp->i_d.di_flags & XFS_DIFLAG_PROJINHERIT) &&
+		     (target_dp->i_d.di_projid != src_ip->i_d.di_projid))) {
+		error = XFS_ERROR(EXDEV);
+		xfs_rename_unlock4(inodes, XFS_ILOCK_SHARED);
+		goto rele_return;
+	}
+
 	new_parent = (src_dp != target_dp);
 	src_is_directory = ((src_ip->i_d.di_mode & S_IFMT) == S_IFDIR);
 
diff --git a/fs/xfs/xfs_vfsops.c b/fs/xfs/xfs_vfsops.c
index f0e09ca14139..36ea1b2094f2 100644
--- a/fs/xfs/xfs_vfsops.c
+++ b/fs/xfs/xfs_vfsops.c
@@ -669,31 +669,22 @@ xfs_mntupdate(
 	xfs_mount_t	*mp = XFS_BHVTOM(bdp);
 	int		error;
 
-	if (args->flags & XFSMNT_BARRIER)
-		mp->m_flags |= XFS_MOUNT_BARRIER;
-	else
-		mp->m_flags &= ~XFS_MOUNT_BARRIER;
-
-	if ((vfsp->vfs_flag & VFS_RDONLY) &&
-	    !(*flags & MS_RDONLY)) {
-		vfsp->vfs_flag &= ~VFS_RDONLY;
-
-		if (args->flags & XFSMNT_BARRIER)
+	if (!(*flags & MS_RDONLY)) {			/* rw/ro -> rw */
+		if (vfsp->vfs_flag & VFS_RDONLY)
+			vfsp->vfs_flag &= ~VFS_RDONLY;
+		if (args->flags & XFSMNT_BARRIER) {
+			mp->m_flags |= XFS_MOUNT_BARRIER;
 			xfs_mountfs_check_barriers(mp);
-	}
-
-	if (!(vfsp->vfs_flag & VFS_RDONLY) &&
-	    (*flags & MS_RDONLY)) {
+		} else {
+			mp->m_flags &= ~XFS_MOUNT_BARRIER;
+		}
+	} else if (!(vfsp->vfs_flag & VFS_RDONLY)) {	/* rw -> ro */
 		VFS_SYNC(vfsp, SYNC_FSDATA|SYNC_BDFLUSH|SYNC_ATTR, NULL, error);
-
 		xfs_quiesce_fs(mp);
-
-		/* Ok now write out an unmount record */
 		xfs_log_unmount_write(mp);
 		xfs_unmountfs_writesb(mp);
 		vfsp->vfs_flag |= VFS_RDONLY;
 	}
-
 	return 0;
 }
 
diff --git a/fs/xfs/xfs_vnodeops.c b/fs/xfs/xfs_vnodeops.c
index fa71b305ba5c..7027ae68ee38 100644
--- a/fs/xfs/xfs_vnodeops.c
+++ b/fs/xfs/xfs_vnodeops.c
@@ -2663,7 +2663,7 @@ xfs_link(
 	 */
 	if (unlikely((tdp->i_d.di_flags & XFS_DIFLAG_PROJINHERIT) &&
 		     (tdp->i_d.di_projid != sip->i_d.di_projid))) {
-		error = XFS_ERROR(EPERM);
+		error = XFS_ERROR(EXDEV);
 		goto error_return;
 	}
 
diff --git a/include/asm-alpha/smp.h b/include/asm-alpha/smp.h
index 9950706abdf8..e1432102be05 100644
--- a/include/asm-alpha/smp.h
+++ b/include/asm-alpha/smp.h
@@ -45,10 +45,8 @@ extern struct cpuinfo_alpha cpu_data[NR_CPUS];
 #define hard_smp_processor_id()	__hard_smp_processor_id()
 #define raw_smp_processor_id()	(current_thread_info()->cpu)
 
-extern cpumask_t cpu_present_mask;
-extern cpumask_t cpu_online_map;
 extern int smp_num_cpus;
-#define cpu_possible_map	cpu_present_mask
+#define cpu_possible_map	cpu_present_map
 
 int smp_call_function_on_cpu(void (*func) (void *info), void *info,int retry, int wait, cpumask_t cpu);
 
diff --git a/include/asm-alpha/termbits.h b/include/asm-alpha/termbits.h
index f4837fa29420..5541101b58ae 100644
--- a/include/asm-alpha/termbits.h
+++ b/include/asm-alpha/termbits.h
@@ -148,6 +148,7 @@ struct termios {
 #define HUPCL	00040000
 
 #define CLOCAL	00100000
+#define CMSPAR	  010000000000		/* mark or space (stick) parity */
 #define CRTSCTS	  020000000000		/* flow control */
 
 /* c_lflag bits */
diff --git a/include/asm-arm/arch-aaec2000/debug-macro.S b/include/asm-arm/arch-aaec2000/debug-macro.S
index e4f1fa539a74..7b1fce021d8a 100644
--- a/include/asm-arm/arch-aaec2000/debug-macro.S
+++ b/include/asm-arm/arch-aaec2000/debug-macro.S
@@ -9,6 +9,7 @@
  *  published by the Free Software Foundation.
  */
 
+#include "hardware.h"
 		.macro	addruart,rx
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1			@ MMU enabled?
diff --git a/include/asm-arm/arch-aaec2000/entry-macro.S b/include/asm-arm/arch-aaec2000/entry-macro.S
index df31313ab07e..1eb3503bd16e 100644
--- a/include/asm-arm/arch-aaec2000/entry-macro.S
+++ b/include/asm-arm/arch-aaec2000/entry-macro.S
@@ -10,6 +10,7 @@
  *  published by the Free Software Foundation.
  *
  */
+#include <asm/arch/irqs.h>
 
 		.macro	disable_fiq
 		.endm
diff --git a/include/asm-arm/arch-imx/debug-macro.S b/include/asm-arm/arch-imx/debug-macro.S
index 83f552f7bcc1..c611871643a2 100644
--- a/include/asm-arm/arch-imx/debug-macro.S
+++ b/include/asm-arm/arch-imx/debug-macro.S
@@ -16,7 +16,7 @@
 		tst	\rx, #1			@ MMU enabled?
 		moveq	\rx, #0x00000000	@ physical
 		movne	\rx, #0xe0000000	@ virtual
-		orr	\rx, \rx, #0x00200000
+		orreq	\rx, \rx, #0x00200000	@ physical
 		orr	\rx, \rx, #0x00006000	@ UART1 offset
 		.endm
 
diff --git a/include/asm-arm/arch-imx/imx-uart.h b/include/asm-arm/arch-imx/imx-uart.h
new file mode 100644
index 000000000000..3a685e1780ea
--- /dev/null
+++ b/include/asm-arm/arch-imx/imx-uart.h
@@ -0,0 +1,10 @@
+#ifndef ASMARM_ARCH_UART_H
+#define ASMARM_ARCH_UART_H
+
+#define IMXUART_HAVE_RTSCTS (1<<0)
+
+struct imxuart_platform_data {
+	unsigned int flags;
+};
+
+#endif
diff --git a/include/asm-arm/arch-ixp23xx/memory.h b/include/asm-arm/arch-ixp23xx/memory.h
index 6e19f46d54d1..c85fc06a043c 100644
--- a/include/asm-arm/arch-ixp23xx/memory.h
+++ b/include/asm-arm/arch-ixp23xx/memory.h
@@ -49,7 +49,7 @@ static inline int __ixp23xx_arch_is_coherent(void)
 {
 	extern unsigned int processor_id;
 
-	if (((processor_id & 15) >= 2) || machine_is_roadrunner())
+	if (((processor_id & 15) >= 4) || machine_is_roadrunner())
 		return 1;
 
 	return 0;
diff --git a/include/asm-arm/arch-ixp4xx/io.h b/include/asm-arm/arch-ixp4xx/io.h
index 942b622455bc..b59520e56fc7 100644
--- a/include/asm-arm/arch-ixp4xx/io.h
+++ b/include/asm-arm/arch-ixp4xx/io.h
@@ -260,6 +260,12 @@ out:
 
 #endif
 
+#ifndef CONFIG_PCI
+
+#define	__io(v)		v
+
+#else
+
 /*
  * IXP4xx does not have a transparent cpu -> PCI I/O translation
  * window.  Instead, it has a set of registers that must be tweaked
@@ -578,6 +584,7 @@ __ixp4xx_iowrite32_rep(void __iomem *addr, const void *vaddr, u32 count)
 
 #define	ioport_map(port, nr)		((void __iomem*)(port + PIO_OFFSET))
 #define	ioport_unmap(addr)
+#endif	// !CONFIG_PCI
 
 #endif	//  __ASM_ARM_ARCH_IO_H
 
diff --git a/include/asm-arm/arch-ixp4xx/memory.h b/include/asm-arm/arch-ixp4xx/memory.h
index ee211d28a3ef..af9667b57ab3 100644
--- a/include/asm-arm/arch-ixp4xx/memory.h
+++ b/include/asm-arm/arch-ixp4xx/memory.h
@@ -14,7 +14,7 @@
  */
 #define PHYS_OFFSET	UL(0x00000000)
 
-#ifndef __ASSEMBLY__
+#if !defined(__ASSEMBLY__) && defined(CONFIG_PCI)
 
 void ixp4xx_adjust_zones(int node, unsigned long *size, unsigned long *holes);
 
diff --git a/include/asm-arm/arch-l7200/serial_l7200.h b/include/asm-arm/arch-l7200/serial_l7200.h
index 238c595d97ea..b1008a9d23e5 100644
--- a/include/asm-arm/arch-l7200/serial_l7200.h
+++ b/include/asm-arm/arch-l7200/serial_l7200.h
@@ -28,7 +28,7 @@
 #define UARTDR			0x00	/* Tx/Rx data */
 #define RXSTAT			0x04	/* Rx status */
 #define H_UBRLCR		0x08	/* mode register high */
-#define M_UBRLCR		0x0C	/* mode reg mid (MSB of buad)*/
+#define M_UBRLCR		0x0C	/* mode reg mid (MSB of baud)*/
 #define L_UBRLCR		0x10	/* mode reg low (LSB of baud)*/
 #define UARTCON			0x14	/* control register */
 #define UARTFLG			0x18	/* flag register */
diff --git a/include/asm-arm/arch-l7200/uncompress.h b/include/asm-arm/arch-l7200/uncompress.h
index 9fcd40aee3e3..04be2a088639 100644
--- a/include/asm-arm/arch-l7200/uncompress.h
+++ b/include/asm-arm/arch-l7200/uncompress.h
@@ -6,7 +6,7 @@
  * Changelog:
  *  05-01-2000	SJH	Created
  *  05-13-2000	SJH	Filled in function bodies
- *  07-26-2000	SJH	Removed hard coded buad rate
+ *  07-26-2000	SJH	Removed hard coded baud rate
  */
 
 #include <asm/hardware.h>
diff --git a/include/asm-arm/arch-pxa/dma.h b/include/asm-arm/arch-pxa/dma.h
index 3e88a2a02a0f..a008150abc59 100644
--- a/include/asm-arm/arch-pxa/dma.h
+++ b/include/asm-arm/arch-pxa/dma.h
@@ -24,27 +24,29 @@ typedef struct pxa_dma_desc {
 	volatile u32 dcmd;	/* DCMD value for the current transfer */
 } pxa_dma_desc;
 
+typedef enum {
+	DMA_PRIO_HIGH = 0,
+	DMA_PRIO_MEDIUM = 1,
+	DMA_PRIO_LOW = 2
+} pxa_dma_prio;
+
 #if defined(CONFIG_PXA27x)
 
 #define PXA_DMA_CHANNELS	32
-#define PXA_DMA_NBCH(prio)	((prio == DMA_PRIO_LOW) ? 16 : 8)
 
-typedef enum {
-	DMA_PRIO_HIGH = 0,
-	DMA_PRIO_MEDIUM = 8,
-	DMA_PRIO_LOW = 16
-} pxa_dma_prio;
+#define pxa_for_each_dma_prio(ch, prio)					\
+for (									\
+	ch = prio * 4;							\
+	ch != (4 << prio) + 16;						\
+	ch = (ch + 1 == (4 << prio)) ? (prio * 4 + 16) : (ch + 1)	\
+)
 
 #elif defined(CONFIG_PXA25x)
 
 #define PXA_DMA_CHANNELS	16
-#define PXA_DMA_NBCH(prio)	((prio == DMA_PRIO_LOW) ? 8 : 4)
 
-typedef enum {
-	DMA_PRIO_HIGH = 0,
-	DMA_PRIO_MEDIUM = 4,
-	DMA_PRIO_LOW = 8
-} pxa_dma_prio;
+#define pxa_for_each_dma_prio(ch, prio)					\
+	for (ch = prio * 4; ch != (4 << prio); ch++)
 
 #endif
 
diff --git a/include/asm-arm/arch-pxa/pxa2xx_spi.h b/include/asm-arm/arch-pxa/pxa2xx_spi.h
new file mode 100644
index 000000000000..915590c391c8
--- /dev/null
+++ b/include/asm-arm/arch-pxa/pxa2xx_spi.h
@@ -0,0 +1,71 @@
+/*
+ * Copyright (C) 2005 Stephen Street / StreetFire Sound Labs
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef PXA2XX_SPI_H_
+#define PXA2XX_SPI_H_
+
+#define PXA2XX_CS_ASSERT (0x01)
+#define PXA2XX_CS_DEASSERT (0x02)
+
+#if defined(CONFIG_PXA25x)
+#define CLOCK_SPEED_HZ 3686400
+#define SSP1_SerClkDiv(x) (((CLOCK_SPEED_HZ/2/(x+1))<<8)&0x0000ff00)
+#define SSP2_SerClkDiv(x) (((CLOCK_SPEED_HZ/(x+1))<<8)&0x000fff00)
+#define SSP3_SerClkDiv(x) (((CLOCK_SPEED_HZ/(x+1))<<8)&0x000fff00)
+#define SSP_TIMEOUT_SCALE (2712)
+#elif defined(CONFIG_PXA27x)
+#define CLOCK_SPEED_HZ 13000000
+#define SSP1_SerClkDiv(x) (((CLOCK_SPEED_HZ/(x+1))<<8)&0x000fff00)
+#define SSP2_SerClkDiv(x) (((CLOCK_SPEED_HZ/(x+1))<<8)&0x000fff00)
+#define SSP3_SerClkDiv(x) (((CLOCK_SPEED_HZ/(x+1))<<8)&0x000fff00)
+#define SSP_TIMEOUT_SCALE (769)
+#endif
+
+#define SSP_TIMEOUT(x) ((x*10000)/SSP_TIMEOUT_SCALE)
+#define SSP1_VIRT ((void *)(io_p2v(__PREG(SSCR0_P(1)))))
+#define SSP2_VIRT ((void *)(io_p2v(__PREG(SSCR0_P(2)))))
+#define SSP3_VIRT ((void *)(io_p2v(__PREG(SSCR0_P(3)))))
+
+enum pxa_ssp_type {
+	SSP_UNDEFINED = 0,
+	PXA25x_SSP,  /* pxa 210, 250, 255, 26x */
+	PXA25x_NSSP, /* pxa 255, 26x (including ASSP) */
+	PXA27x_SSP,
+};
+
+/* device.platform_data for SSP controller devices */
+struct pxa2xx_spi_master {
+	enum pxa_ssp_type ssp_type;
+	u32 clock_enable;
+	u16 num_chipselect;
+	u8 enable_dma;
+};
+
+/* spi_board_info.controller_data for SPI slave devices,
+ * copied to spi_device.platform_data ... mostly for dma tuning
+ */
+struct pxa2xx_spi_chip {
+	u8 tx_threshold;
+	u8 rx_threshold;
+	u8 dma_burst_size;
+	u32 timeout_microsecs;
+	u8 enable_loopback;
+	void (*cs_control)(u32 command);
+};
+
+#endif /*PXA2XX_SPI_H_*/
diff --git a/include/asm-arm/arch-s3c2410/spi-gpio.h b/include/asm-arm/arch-s3c2410/spi-gpio.h
new file mode 100644
index 000000000000..258c00bca270
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/spi-gpio.h
@@ -0,0 +1,31 @@
+/* linux/include/asm-arm/arch-s3c2410/spi.h
+ *
+ * Copyright (c) 2006 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - SPI Controller platfrom_device info
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_SPIGPIO_H
+#define __ASM_ARCH_SPIGPIO_H __FILE__
+
+struct s3c2410_spigpio_info;
+struct spi_board_info;
+
+struct s3c2410_spigpio_info {
+	unsigned long		 pin_clk;
+	unsigned long		 pin_mosi;
+	unsigned long		 pin_miso;
+
+	unsigned long		 board_size;
+	struct spi_board_info	*board_info;
+
+	void (*chip_select)(struct s3c2410_spigpio_info *spi, int cs);
+};
+
+
+#endif /* __ASM_ARCH_SPIGPIO_H */
diff --git a/include/asm-arm/arch-s3c2410/spi.h b/include/asm-arm/arch-s3c2410/spi.h
new file mode 100644
index 000000000000..4029a1a1ab40
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/spi.h
@@ -0,0 +1,29 @@
+/* linux/include/asm-arm/arch-s3c2410/spi.h
+ *
+ * Copyright (c) 2006 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - SPI Controller platform_device info
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_SPI_H
+#define __ASM_ARCH_SPI_H __FILE__
+
+struct s3c2410_spi_info;
+struct spi_board_info;
+
+struct s3c2410_spi_info {
+	unsigned long		 pin_cs;	/* simple gpio cs */
+
+	unsigned long		 board_size;
+	struct spi_board_info	*board_info;
+
+	void (*set_cs)(struct s3c2410_spi_info *spi, int cs, int pol);
+};
+
+
+#endif /* __ASM_ARCH_SPI_H */
diff --git a/include/asm-arm/bug.h b/include/asm-arm/bug.h
index 7fb02138f585..5ab8216f5204 100644
--- a/include/asm-arm/bug.h
+++ b/include/asm-arm/bug.h
@@ -2,6 +2,7 @@
 #define _ASMARM_BUG_H
 
 #include <linux/config.h>
+#include <linux/stddef.h>
 
 #ifdef CONFIG_BUG
 #ifdef CONFIG_DEBUG_BUGVERBOSE
diff --git a/include/asm-arm/procinfo.h b/include/asm-arm/procinfo.h
index a9c75b2c314f..842526055225 100644
--- a/include/asm-arm/procinfo.h
+++ b/include/asm-arm/procinfo.h
@@ -45,8 +45,6 @@ extern unsigned int elf_hwcap;
 
 #endif	/* __ASSEMBLY__ */
 
-#define PROC_INFO_SZ	48
-
 #define HWCAP_SWP	1
 #define HWCAP_HALF	2
 #define HWCAP_THUMB	4
diff --git a/include/asm-arm/spinlock.h b/include/asm-arm/spinlock.h
index 43ad4e55878c..406ca97a8ab2 100644
--- a/include/asm-arm/spinlock.h
+++ b/include/asm-arm/spinlock.h
@@ -142,6 +142,9 @@ static inline void __raw_write_unlock(raw_rwlock_t *rw)
 	: "cc");
 }
 
+/* write_can_lock - would write_trylock() succeed? */
+#define __raw_write_can_lock(x)		((x)->lock == 0x80000000)
+
 /*
  * Read locks are a bit more hairy:
  *  - Exclusively load the lock value.
@@ -198,4 +201,7 @@ static inline void __raw_read_unlock(raw_rwlock_t *rw)
 
 #define __raw_read_trylock(lock) generic__raw_read_trylock(lock)
 
+/* read_can_lock - would read_trylock() succeed? */
+#define __raw_read_can_lock(x)		((x)->lock < 0x80000000)
+
 #endif /* __ASM_SPINLOCK_H */
diff --git a/include/asm-arm/system.h b/include/asm-arm/system.h
index 95b3abf4851b..7c9568d30307 100644
--- a/include/asm-arm/system.h
+++ b/include/asm-arm/system.h
@@ -127,6 +127,12 @@ static inline int cpu_is_xsc3(void)
 }
 #endif
 
+#if !defined(CONFIG_CPU_XSCALE) && !defined(CONFIG_CPU_XSC3)
+#define	cpu_is_xscale()	0
+#else
+#define	cpu_is_xscale()	1
+#endif
+
 #define set_cr(x)					\
 	__asm__ __volatile__(				\
 	"mcr	p15, 0, %0, c1, c0, 0	@ set CR"	\
diff --git a/include/asm-arm/unistd.h b/include/asm-arm/unistd.h
index 65ac305c2d45..cbf39a56dbe7 100644
--- a/include/asm-arm/unistd.h
+++ b/include/asm-arm/unistd.h
@@ -360,6 +360,24 @@
 #define __ARM_NR_usr32			(__ARM_NR_BASE+4)
 #define __ARM_NR_set_tls		(__ARM_NR_BASE+5)
 
+/*
+ * The following syscalls are obsolete and no longer available for EABI.
+ */
+#if defined(__ARM_EABI__) && !defined(__KERNEL__)
+#undef __NR_time
+#undef __NR_umount
+#undef __NR_stime
+#undef __NR_alarm
+#undef __NR_utime
+#undef __NR_getrlimit
+#undef __NR_select
+#undef __NR_readdir
+#undef __NR_mmap
+#undef __NR_socketcall
+#undef __NR_syscall
+#undef __NR_ipc
+#endif
+
 #define __sys2(x) #x
 #define __sys1(x) __sys2(x)
 
@@ -392,7 +410,8 @@ type name(void) {							\
   __asm__ __volatile__ (						\
   __syscall(name)							\
 	: "=r" (__res_r0)						\
-	: __SYS_REG_LIST() );						\
+	: __SYS_REG_LIST()						\
+	: "memory" );							\
   __res = __res_r0;							\
   __syscall_return(type,__res);						\
 }
@@ -406,7 +425,8 @@ type name(type1 arg1) { 						\
   __asm__ __volatile__ (						\
   __syscall(name)							\
 	: "=r" (__res_r0)						\
-	: __SYS_REG_LIST( "0" (__r0) ) );				\
+	: __SYS_REG_LIST( "0" (__r0) )					\
+	: "memory" );							\
   __res = __res_r0;							\
   __syscall_return(type,__res);						\
 }
@@ -421,7 +441,8 @@ type name(type1 arg1,type2 arg2) {					\
   __asm__ __volatile__ (						\
   __syscall(name)							\
 	: "=r" (__res_r0)						\
-	: __SYS_REG_LIST( "0" (__r0), "r" (__r1) ) );			\
+	: __SYS_REG_LIST( "0" (__r0), "r" (__r1) )			\
+	: "memory" );							\
   __res = __res_r0;							\
   __syscall_return(type,__res);						\
 }
@@ -438,7 +459,8 @@ type name(type1 arg1,type2 arg2,type3 arg3) {				\
   __asm__ __volatile__ (						\
   __syscall(name)							\
 	: "=r" (__res_r0)						\
-	: __SYS_REG_LIST( "0" (__r0), "r" (__r1), "r" (__r2) ) );	\
+	: __SYS_REG_LIST( "0" (__r0), "r" (__r1), "r" (__r2) )		\
+	: "memory" );							\
   __res = __res_r0;							\
   __syscall_return(type,__res);						\
 }
@@ -456,7 +478,8 @@ type name(type1 arg1, type2 arg2, type3 arg3, type4 arg4) {		\
   __asm__ __volatile__ (						\
   __syscall(name)							\
 	: "=r" (__res_r0)						\
-	: __SYS_REG_LIST( "0" (__r0), "r" (__r1), "r" (__r2), "r" (__r3) ) ); \
+	: __SYS_REG_LIST( "0" (__r0), "r" (__r1), "r" (__r2), "r" (__r3) ) \
+	: "memory" );							\
   __res = __res_r0;							\
   __syscall_return(type,__res);						\
 }
@@ -476,7 +499,8 @@ type name(type1 arg1, type2 arg2, type3 arg3, type4 arg4, type5 arg5) {	\
   __syscall(name)							\
 	: "=r" (__res_r0)						\
 	: __SYS_REG_LIST( "0" (__r0), "r" (__r1), "r" (__r2),		\
-			  "r" (__r3), "r" (__r4) ) );			\
+			  "r" (__r3), "r" (__r4) )			\
+	: "memory" );							\
   __res = __res_r0;							\
   __syscall_return(type,__res);						\
 }
@@ -496,7 +520,8 @@ type name(type1 arg1, type2 arg2, type3 arg3, type4 arg4, type5 arg5, type6 arg6
   __syscall(name)							\
 	: "=r" (__res_r0)						\
 	: __SYS_REG_LIST( "0" (__r0), "r" (__r1), "r" (__r2),		\
-			  "r" (__r3), "r" (__r4), "r" (__r5) ) );	\
+			  "r" (__r3), "r" (__r4), "r" (__r5) )		\
+	: "memory" );							\
   __res = __res_r0;							\
   __syscall_return(type,__res);						\
 }
diff --git a/include/asm-generic/pgtable.h b/include/asm-generic/pgtable.h
index 358e4d309ceb..c2059a3a0621 100644
--- a/include/asm-generic/pgtable.h
+++ b/include/asm-generic/pgtable.h
@@ -159,17 +159,8 @@ static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addres
 #define lazy_mmu_prot_update(pte)	do { } while (0)
 #endif
 
-#ifndef __HAVE_ARCH_MULTIPLE_ZERO_PAGE
+#ifndef __HAVE_ARCH_MOVE_PTE
 #define move_pte(pte, prot, old_addr, new_addr)	(pte)
-#else
-#define move_pte(pte, prot, old_addr, new_addr)				\
-({									\
- 	pte_t newpte = (pte);						\
-	if (pte_present(pte) && pfn_valid(pte_pfn(pte)) &&		\
-			pte_page(pte) == ZERO_PAGE(old_addr))		\
-		newpte = mk_pte(ZERO_PAGE(new_addr), (prot));		\
-	newpte;								\
-})
 #endif
 
 /*
diff --git a/include/asm-i386/atomic.h b/include/asm-i386/atomic.h
index 22d80ece95cb..4ddce5296a78 100644
--- a/include/asm-i386/atomic.h
+++ b/include/asm-i386/atomic.h
@@ -183,6 +183,7 @@ static __inline__ int atomic_add_return(int i, atomic_t *v)
 {
 	int __i;
 #ifdef CONFIG_M386
+	unsigned long flags;
 	if(unlikely(boot_cpu_data.x86==3))
 		goto no_xadd;
 #endif
@@ -196,10 +197,10 @@ static __inline__ int atomic_add_return(int i, atomic_t *v)
 
 #ifdef CONFIG_M386
 no_xadd: /* Legacy 386 processor */
-	local_irq_disable();
+	local_irq_save(flags);
 	__i = atomic_read(v);
 	atomic_set(v, i + __i);
-	local_irq_enable();
+	local_irq_restore(flags);
 	return i + __i;
 #endif
 }
diff --git a/include/asm-i386/cpufeature.h b/include/asm-i386/cpufeature.h
index 5c0b5876b931..b44bfc6239cb 100644
--- a/include/asm-i386/cpufeature.h
+++ b/include/asm-i386/cpufeature.h
@@ -71,6 +71,7 @@
 #define X86_FEATURE_P4		(3*32+ 7) /* P4 */
 #define X86_FEATURE_CONSTANT_TSC (3*32+ 8) /* TSC ticks at a constant rate */
 #define X86_FEATURE_UP		(3*32+ 9) /* smp kernel running on up */
+#define X86_FEATURE_FXSAVE_LEAK (3*32+10) /* FXSAVE leaks FOP/FIP/FOP */
 
 /* Intel-defined CPU features, CPUID level 0x00000001 (ecx), word 4 */
 #define X86_FEATURE_XMM3	(4*32+ 0) /* Streaming SIMD Extensions-3 */
diff --git a/include/asm-i386/i387.h b/include/asm-i386/i387.h
index 152d0baa576a..bc1d6edae1ed 100644
--- a/include/asm-i386/i387.h
+++ b/include/asm-i386/i387.h
@@ -13,6 +13,7 @@
 
 #include <linux/sched.h>
 #include <linux/init.h>
+#include <linux/kernel_stat.h>
 #include <asm/processor.h>
 #include <asm/sigcontext.h>
 #include <asm/user.h>
@@ -38,17 +39,38 @@ extern void init_fpu(struct task_struct *);
 extern void kernel_fpu_begin(void);
 #define kernel_fpu_end() do { stts(); preempt_enable(); } while(0)
 
+/* We need a safe address that is cheap to find and that is already
+   in L1 during context switch. The best choices are unfortunately
+   different for UP and SMP */
+#ifdef CONFIG_SMP
+#define safe_address (__per_cpu_offset[0])
+#else
+#define safe_address (kstat_cpu(0).cpustat.user)
+#endif
+
 /*
  * These must be called with preempt disabled
  */
 static inline void __save_init_fpu( struct task_struct *tsk )
 {
+	/* Use more nops than strictly needed in case the compiler
+	   varies code */
 	alternative_input(
-		"fnsave %1 ; fwait ;" GENERIC_NOP2,
-		"fxsave %1 ; fnclex",
+		"fnsave %[fx] ;fwait;" GENERIC_NOP8 GENERIC_NOP4,
+		"fxsave %[fx]\n"
+		"bt $7,%[fsw] ; jnc 1f ; fnclex\n1:",
 		X86_FEATURE_FXSR,
-		"m" (tsk->thread.i387.fxsave)
-		:"memory");
+		[fx] "m" (tsk->thread.i387.fxsave),
+		[fsw] "m" (tsk->thread.i387.fxsave.swd) : "memory");
+	/* AMD K7/K8 CPUs don't save/restore FDP/FIP/FOP unless an exception
+	   is pending.  Clear the x87 state here by setting it to fixed
+   	   values. safe_address is a random variable that should be in L1 */
+	alternative_input(
+		GENERIC_NOP8 GENERIC_NOP2,
+		"emms\n\t"	  	/* clear stack tags */
+		"fildl %[addr]", 	/* set F?P to defined value */
+		X86_FEATURE_FXSAVE_LEAK,
+		[addr] "m" (safe_address));
 	task_thread_info(tsk)->status &= ~TS_USEDFPU;
 }
 
diff --git a/include/asm-i386/io_apic.h b/include/asm-i386/io_apic.h
index 51c4e5fe6062..d92e253f7f6f 100644
--- a/include/asm-i386/io_apic.h
+++ b/include/asm-i386/io_apic.h
@@ -200,6 +200,7 @@ extern int io_apic_get_unique_id (int ioapic, int apic_id);
 extern int io_apic_get_version (int ioapic);
 extern int io_apic_get_redir_entries (int ioapic);
 extern int io_apic_set_pci_routing (int ioapic, int pin, int irq, int edge_level, int active_high_low);
+extern int timer_uses_ioapic_pin_0;
 #endif /* CONFIG_ACPI */
 
 extern int (*ioapic_renumber_irq)(int ioapic, int irq);
diff --git a/include/asm-i386/pgtable-2level.h b/include/asm-i386/pgtable-2level.h
index 27bde973abc7..2756d4b04c27 100644
--- a/include/asm-i386/pgtable-2level.h
+++ b/include/asm-i386/pgtable-2level.h
@@ -18,6 +18,9 @@
 #define set_pte_atomic(pteptr, pteval) set_pte(pteptr,pteval)
 #define set_pmd(pmdptr, pmdval) (*(pmdptr) = (pmdval))
 
+#define pte_clear(mm,addr,xp)	do { set_pte_at(mm, addr, xp, __pte(0)); } while (0)
+#define pmd_clear(xp)	do { set_pmd(xp, __pmd(0)); } while (0)
+
 #define ptep_get_and_clear(mm,addr,xp)	__pte(xchg(&(xp)->pte_low, 0))
 #define pte_same(a, b)		((a).pte_low == (b).pte_low)
 #define pte_page(x)		pfn_to_page(pte_pfn(x))
diff --git a/include/asm-i386/pgtable-3level.h b/include/asm-i386/pgtable-3level.h
index 36a5aa63cbbf..dccb1b3337ad 100644
--- a/include/asm-i386/pgtable-3level.h
+++ b/include/asm-i386/pgtable-3level.h
@@ -85,6 +85,26 @@ static inline void pud_clear (pud_t * pud) { }
 #define pmd_offset(pud, address) ((pmd_t *) pud_page(*(pud)) + \
 			pmd_index(address))
 
+/*
+ * For PTEs and PDEs, we must clear the P-bit first when clearing a page table
+ * entry, so clear the bottom half first and enforce ordering with a compiler
+ * barrier.
+ */
+static inline void pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
+{
+	ptep->pte_low = 0;
+	smp_wmb();
+	ptep->pte_high = 0;
+}
+
+static inline void pmd_clear(pmd_t *pmd)
+{
+	u32 *tmp = (u32 *)pmd;
+	*tmp = 0;
+	smp_wmb();
+	*(tmp + 1) = 0;
+}
+
 static inline pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
 {
 	pte_t res;
diff --git a/include/asm-i386/pgtable.h b/include/asm-i386/pgtable.h
index ee056c41a9fb..672c3f76b9df 100644
--- a/include/asm-i386/pgtable.h
+++ b/include/asm-i386/pgtable.h
@@ -204,12 +204,10 @@ extern unsigned long long __PAGE_KERNEL, __PAGE_KERNEL_EXEC;
 extern unsigned long pg0[];
 
 #define pte_present(x)	((x).pte_low & (_PAGE_PRESENT | _PAGE_PROTNONE))
-#define pte_clear(mm,addr,xp)	do { set_pte_at(mm, addr, xp, __pte(0)); } while (0)
 
 /* To avoid harmful races, pmd_none(x) should check only the lower when PAE */
 #define pmd_none(x)	(!(unsigned long)pmd_val(x))
 #define pmd_present(x)	(pmd_val(x) & _PAGE_PRESENT)
-#define pmd_clear(xp)	do { set_pmd(xp, __pmd(0)); } while (0)
 #define	pmd_bad(x)	((pmd_val(x) & (~PAGE_MASK & ~_PAGE_USER)) != _KERNPG_TABLE)
 
 
@@ -268,7 +266,7 @@ static inline pte_t ptep_get_and_clear_full(struct mm_struct *mm, unsigned long
 	pte_t pte;
 	if (full) {
 		pte = *ptep;
-		*ptep = __pte(0);
+		pte_clear(mm, addr, ptep);
 	} else {
 		pte = ptep_get_and_clear(mm, addr, ptep);
 	}
diff --git a/include/asm-i386/unistd.h b/include/asm-i386/unistd.h
index 6a8dd83c350f..eb4b152c82fc 100644
--- a/include/asm-i386/unistd.h
+++ b/include/asm-i386/unistd.h
@@ -320,8 +320,10 @@
 #define __NR_get_robust_list	312
 #define __NR_splice		313
 #define __NR_sync_file_range	314
+#define __NR_tee		315
+#define __NR_vmsplice		316
 
-#define NR_syscalls 315
+#define NR_syscalls 317
 
 /*
  * user-visible error numbers are in the range -1 - -128: see
diff --git a/include/asm-ia64/acpi.h b/include/asm-ia64/acpi.h
index d734585a23cf..09a5dd0e44a8 100644
--- a/include/asm-ia64/acpi.h
+++ b/include/asm-ia64/acpi.h
@@ -110,9 +110,8 @@ extern void prefill_possible_map(void);
 extern int additional_cpus;
 
 #ifdef CONFIG_ACPI_NUMA
-/* Proximity bitmap length; _PXM is at most 255 (8 bit)*/
-#ifdef CONFIG_IA64_NR_NODES
-#define MAX_PXM_DOMAINS CONFIG_IA64_NR_NODES
+#if MAX_NUMNODES > 256
+#define MAX_PXM_DOMAINS MAX_NUMNODES
 #else
 #define MAX_PXM_DOMAINS (256)
 #endif
diff --git a/include/asm-ia64/bitops.h b/include/asm-ia64/bitops.h
index 90921e162793..6cc517e212a9 100644
--- a/include/asm-ia64/bitops.h
+++ b/include/asm-ia64/bitops.h
@@ -11,7 +11,6 @@
 
 #include <linux/compiler.h>
 #include <linux/types.h>
-#include <asm/bitops.h>
 #include <asm/intrinsics.h>
 
 /**
diff --git a/include/asm-ia64/machvec.h b/include/asm-ia64/machvec.h
index c3e4ed8a3e17..a9c995a86c21 100644
--- a/include/asm-ia64/machvec.h
+++ b/include/asm-ia64/machvec.h
@@ -347,9 +347,11 @@ extern ia64_mv_dma_supported		swiotlb_dma_supported;
 #endif
 #ifndef platform_pci_legacy_read
 # define platform_pci_legacy_read	ia64_pci_legacy_read
+extern int ia64_pci_legacy_read(struct pci_bus *bus, u16 port, u32 *val, u8 size);
 #endif
 #ifndef platform_pci_legacy_write
 # define platform_pci_legacy_write	ia64_pci_legacy_write
+extern int ia64_pci_legacy_write(struct pci_bus *bus, u16 port, u32 val, u8 size);
 #endif
 #ifndef platform_inb
 # define platform_inb		__ia64_inb
diff --git a/include/asm-ia64/sn/sn2/sn_hwperf.h b/include/asm-ia64/sn/sn2/sn_hwperf.h
index 291ef3d69da2..e61ebac38cdd 100644
--- a/include/asm-ia64/sn/sn2/sn_hwperf.h
+++ b/include/asm-ia64/sn/sn2/sn_hwperf.h
@@ -45,8 +45,12 @@ struct sn_hwperf_object_info {
 #define SN_HWPERF_IS_NODE(x)		((x) && strstr((x)->name, "SHub"))
 #define SN_HWPERF_IS_NODE_SHUB2(x)	((x) && strstr((x)->name, "SHub 2."))
 #define SN_HWPERF_IS_IONODE(x)		((x) && strstr((x)->name, "TIO"))
-#define SN_HWPERF_IS_ROUTER(x)		((x) && strstr((x)->name, "Router"))
 #define SN_HWPERF_IS_NL3ROUTER(x)	((x) && strstr((x)->name, "NL3Router"))
+#define SN_HWPERF_IS_NL4ROUTER(x)	((x) && strstr((x)->name, "NL4Router"))
+#define SN_HWPERF_IS_OLDROUTER(x)	((x) && strstr((x)->name, "Router"))
+#define SN_HWPERF_IS_ROUTER(x)		(SN_HWPERF_IS_NL3ROUTER(x) || 		\
+					 	SN_HWPERF_IS_NL4ROUTER(x) || 	\
+					 	SN_HWPERF_IS_OLDROUTER(x))
 #define SN_HWPERF_FOREIGN(x)		((x) && !(x)->sn_hwp_this_part && !(x)->sn_hwp_is_shared)
 #define SN_HWPERF_SAME_OBJTYPE(x,y)	((SN_HWPERF_IS_NODE(x) && SN_HWPERF_IS_NODE(y)) ||\
 					(SN_HWPERF_IS_IONODE(x) && SN_HWPERF_IS_IONODE(y)) ||\
diff --git a/include/asm-ia64/sn/sn_sal.h b/include/asm-ia64/sn/sn_sal.h
index bf4cc867a698..51aca022cf39 100644
--- a/include/asm-ia64/sn/sn_sal.h
+++ b/include/asm-ia64/sn/sn_sal.h
@@ -8,7 +8,7 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  *
- * Copyright (c) 2000-2005 Silicon Graphics, Inc.  All rights reserved.
+ * Copyright (c) 2000-2006 Silicon Graphics, Inc.  All rights reserved.
  */
 
 
@@ -85,6 +85,7 @@
 
 #define  SN_SAL_GET_PROM_FEATURE_SET		   0x02000065
 #define  SN_SAL_SET_OS_FEATURE_SET		   0x02000066
+#define  SN_SAL_INJECT_ERROR			   0x02000067
 
 /*
  * Service-specific constants
@@ -705,10 +706,8 @@ static inline int
 sn_change_memprotect(u64 paddr, u64 len, u64 perms, u64 *nasid_array)
 {
 	struct ia64_sal_retval ret_stuff;
-	int cnodeid;
 	unsigned long irq_flags;
 
-	cnodeid = nasid_to_cnodeid(get_node_number(paddr));
 	local_irq_save(irq_flags);
 	ia64_sal_oemcall_nolock(&ret_stuff, SN_SAL_MEMPROTECT, paddr, len,
 				(u64)nasid_array, perms, 0, 0, 0);
@@ -1140,4 +1139,16 @@ ia64_sn_set_os_feature(int feature)
 	return rv.status;
 }
 
+static inline int
+sn_inject_error(u64 paddr, u64 *data, u64 *ecc)
+{
+	struct ia64_sal_retval ret_stuff;
+	unsigned long irq_flags;
+
+	local_irq_save(irq_flags);
+	ia64_sal_oemcall_nolock(&ret_stuff, SN_SAL_INJECT_ERROR, paddr, (u64)data,
+				(u64)ecc, 0, 0, 0, 0);
+	local_irq_restore(irq_flags);
+	return ret_stuff.status;
+}
 #endif /* _ASM_IA64_SN_SN_SAL_H */
diff --git a/include/asm-ia64/thread_info.h b/include/asm-ia64/thread_info.h
index 56394a2c7055..e5392c4d30c6 100644
--- a/include/asm-ia64/thread_info.h
+++ b/include/asm-ia64/thread_info.h
@@ -67,7 +67,7 @@ struct thread_info {
 #define end_of_stack(p) (unsigned long *)((void *)(p) + IA64_RBS_OFFSET)
 
 #define __HAVE_ARCH_TASK_STRUCT_ALLOCATOR
-#define alloc_task_struct()	((task_t *)__get_free_pages(GFP_KERNEL, KERNEL_STACK_SIZE_ORDER))
+#define alloc_task_struct()	((task_t *)__get_free_pages(GFP_KERNEL | __GFP_COMP, KERNEL_STACK_SIZE_ORDER))
 #define free_task_struct(tsk)	free_pages((unsigned long) (tsk), KERNEL_STACK_SIZE_ORDER)
 
 #endif /* !__ASSEMBLY */
diff --git a/include/asm-ia64/topology.h b/include/asm-ia64/topology.h
index 3ee19dfa46df..616b5ed2aa72 100644
--- a/include/asm-ia64/topology.h
+++ b/include/asm-ia64/topology.h
@@ -23,6 +23,11 @@
 #define PENALTY_FOR_NODE_WITH_CPUS 255
 
 /*
+ * Distance above which we begin to use zone reclaim
+ */
+#define RECLAIM_DISTANCE 15
+
+/*
  * Returns the number of the node containing CPU 'cpu'
  */
 #define cpu_to_node(cpu) (int)(cpu_to_node_map[cpu])
diff --git a/include/asm-ia64/unistd.h b/include/asm-ia64/unistd.h
index 1c749acca021..7107763168bf 100644
--- a/include/asm-ia64/unistd.h
+++ b/include/asm-ia64/unistd.h
@@ -289,12 +289,14 @@
 #define __NR_set_robust_list		1298
 #define __NR_get_robust_list		1299
 #define __NR_sync_file_range		1300
+#define __NR_tee			1301
+#define __NR_vmsplice			1302
 
 #ifdef __KERNEL__
 
 #include <linux/config.h>
 
-#define NR_syscalls			277 /* length of syscall table */
+#define NR_syscalls			279 /* length of syscall table */
 
 #define __ARCH_WANT_SYS_RT_SIGACTION
 
diff --git a/include/asm-m32r/assembler.h b/include/asm-m32r/assembler.h
index b7f4d8aaeb46..1a1aa17edd33 100644
--- a/include/asm-m32r/assembler.h
+++ b/include/asm-m32r/assembler.h
@@ -109,6 +109,9 @@
 	push	r13
 	mvfachi	r13
 	push	r13
+	ldi	r13, #0
+	push	r13		; dummy push acc1h
+	push	r13		; dummy push acc1l
 #else
 #error unknown isa configuration
 #endif
@@ -156,6 +159,8 @@
 	pop	r13
 	mvtaclo	r13, a1
 #elif defined(CONFIG_ISA_M32R2) || defined(CONFIG_ISA_M32R)
+	pop	r13		; dummy pop acc1h
+	pop	r13		; dummy pop acc1l
 	pop	r13
 	mvtachi	r13
 	pop	r13
diff --git a/include/asm-m32r/mappi3/mappi3_pld.h b/include/asm-m32r/mappi3/mappi3_pld.h
index 1d3c25d61bcb..031369a7afc8 100644
--- a/include/asm-m32r/mappi3/mappi3_pld.h
+++ b/include/asm-m32r/mappi3/mappi3_pld.h
@@ -53,16 +53,14 @@
 /* Power Control of MMC and CF */
 #define PLD_CPCR		__reg16(PLD_BASE + 0x14000)
 
-
-/*==== ICU ====*/
-#define  M32R_IRQ_PC104        (5)   /* INT4(PC/104) */
-#define  M32R_IRQ_I2C          (28)  /* I2C-BUS     */
-#define  PLD_IRQ_CFIREQ       (6)  /* INT5 CFC Card Interrupt */
-#define  PLD_IRQ_CFC_INSERT   (7)  /* INT6 CFC Card Insert */
-#define  PLD_IRQ_IDEIREQ      (8)  /* INT7 IDE Interrupt   */
-#define  PLD_IRQ_MMCCARD      (43)  /* MMC Card Insert */
-#define  PLD_IRQ_MMCIRQ       (44)  /* MMC Transfer Done */
-
+/* ICU */
+#define M32R_IRQ_PC104		(5)	/* INT4(PC/104) */
+#define M32R_IRQ_I2C		(28)	/* I2C-BUS */
+#define PLD_IRQ_CFIREQ		(6)	/* INT5 CFC Card Interrupt */
+#define PLD_IRQ_CFC_INSERT	(7)	/* INT6 CFC Card Insert & Eject */
+#define PLD_IRQ_IDEIREQ		(8)	/* INT7 IDE Interrupt */
+#define PLD_IRQ_MMCCARD		(43)	/* MMC Card Insert */
+#define PLD_IRQ_MMCIRQ		(44)	/* MMC Transfer Done */
 
 #if 0
 /* LED Control
@@ -97,7 +95,6 @@
 #define PLD_CRC16ADATA		__reg16(PLD_BASE + 0x18008)
 #define PLD_CRC16AINDATA	__reg16(PLD_BASE + 0x1800a)
 
-
 #if 0
 /* RTC */
 #define PLD_RTCCR		__reg16(PLD_BASE + 0x1c000)
@@ -140,4 +137,7 @@
 
 #endif
 
+/* Reset Control */
+#define PLD_REBOOT		__reg16(PLD_BASE + 0x38000)
+
 #endif	/* _MAPPI3_PLD.H */
diff --git a/include/asm-m32r/ptrace.h b/include/asm-m32r/ptrace.h
index 0d058b2d844e..53c792452dfc 100644
--- a/include/asm-m32r/ptrace.h
+++ b/include/asm-m32r/ptrace.h
@@ -43,6 +43,14 @@
 #define PT_ACC1L	18
 #define PT_ACCH		PT_ACC0H
 #define PT_ACCL		PT_ACC0L
+#elif defined(CONFIG_ISA_M32R2) || defined(CONFIG_ISA_M32R)
+#define PT_ACCH		15
+#define PT_ACCL		16
+#define PT_DUMMY_ACC1H	17
+#define PT_DUMMY_ACC1L	18
+#else
+#error unknown isa conifiguration
+#endif
 #define PT_PSW		19
 #define PT_BPC		20
 #define PT_BBPSW	21
@@ -52,21 +60,6 @@
 #define PT_LR		25
 #define PT_SPI		26
 #define PT_ORIGR0	27
-#elif defined(CONFIG_ISA_M32R2) || defined(CONFIG_ISA_M32R)
-#define PT_ACCH		15
-#define PT_ACCL		16
-#define PT_PSW		17
-#define PT_BPC		18
-#define PT_BBPSW	19
-#define PT_BBPC		20
-#define PT_SPU		21
-#define PT_FP		22
-#define PT_LR		23
-#define PT_SPI		24
-#define PT_ORIGR0	25
-#else
-#error unknown isa conifiguration
-#endif
 
 /* virtual pt_reg entry for gdb */
 #define PT_PC		30
@@ -121,6 +114,8 @@ struct pt_regs {
 #elif defined(CONFIG_ISA_M32R2) || defined(CONFIG_ISA_M32R)
 	unsigned long acch;
 	unsigned long accl;
+	unsigned long dummy_acc1h;
+	unsigned long dummy_acc1l;
 #else
 #error unknown isa configuration
 #endif
diff --git a/include/asm-m32r/semaphore.h b/include/asm-m32r/semaphore.h
index bf447c52a0a1..81750edc8916 100644
--- a/include/asm-m32r/semaphore.h
+++ b/include/asm-m32r/semaphore.h
@@ -9,7 +9,7 @@
  * SMP- and interrupt-safe semaphores..
  *
  * Copyright (C) 1996  Linus Torvalds
- * Copyright (C) 2004  Hirokazu Takata <takata at linux-m32r.org>
+ * Copyright (C) 2004, 2006  Hirokazu Takata <takata at linux-m32r.org>
  */
 
 #include <linux/config.h>
@@ -77,27 +77,8 @@ asmlinkage void __up(struct semaphore * sem);
  */
 static inline void down(struct semaphore * sem)
 {
-	unsigned long flags;
-	long count;
-
 	might_sleep();
-	local_irq_save(flags);
-	__asm__ __volatile__ (
-		"# down				\n\t"
-		DCACHE_CLEAR("%0", "r4", "%1")
-		M32R_LOCK" %0, @%1;		\n\t"
-		"addi	%0, #-1;		\n\t"
-		M32R_UNLOCK" %0, @%1;		\n\t"
-		: "=&r" (count)
-		: "r" (&sem->count)
-		: "memory"
-#ifdef CONFIG_CHIP_M32700_TS1
-		, "r4"
-#endif	/* CONFIG_CHIP_M32700_TS1 */
-	);
-	local_irq_restore(flags);
-
-	if (unlikely(count < 0))
+	if (unlikely(atomic_dec_return(&sem->count) < 0))
 		__down(sem);
 }
 
@@ -107,28 +88,10 @@ static inline void down(struct semaphore * sem)
  */
 static inline int down_interruptible(struct semaphore * sem)
 {
-	unsigned long flags;
-	long count;
 	int result = 0;
 
 	might_sleep();
-	local_irq_save(flags);
-	__asm__ __volatile__ (
-		"# down_interruptible		\n\t"
-		DCACHE_CLEAR("%0", "r4", "%1")
-		M32R_LOCK" %0, @%1;		\n\t"
-		"addi	%0, #-1;		\n\t"
-		M32R_UNLOCK" %0, @%1;		\n\t"
-		: "=&r" (count)
-		: "r" (&sem->count)
-		: "memory"
-#ifdef CONFIG_CHIP_M32700_TS1
-		, "r4"
-#endif	/* CONFIG_CHIP_M32700_TS1 */
-	);
-	local_irq_restore(flags);
-
-	if (unlikely(count < 0))
+	if (unlikely(atomic_dec_return(&sem->count) < 0))
 		result = __down_interruptible(sem);
 
 	return result;
@@ -174,26 +137,7 @@ static inline int down_trylock(struct semaphore * sem)
  */
 static inline void up(struct semaphore * sem)
 {
-	unsigned long flags;
-	long count;
-
-	local_irq_save(flags);
-	__asm__ __volatile__ (
-		"# up				\n\t"
-		DCACHE_CLEAR("%0", "r4", "%1")
-		M32R_LOCK" %0, @%1;		\n\t"
-		"addi	%0, #1;			\n\t"
-		M32R_UNLOCK" %0, @%1;		\n\t"
-		: "=&r" (count)
-		: "r" (&sem->count)
-		: "memory"
-#ifdef CONFIG_CHIP_M32700_TS1
-		, "r4"
-#endif	/* CONFIG_CHIP_M32700_TS1 */
-	);
-	local_irq_restore(flags);
-
-	if (unlikely(count <= 0))
+	if (unlikely(atomic_inc_return(&sem->count) <= 0))
 		__up(sem);
 }
 
diff --git a/include/asm-m32r/sigcontext.h b/include/asm-m32r/sigcontext.h
index c233e2def2a3..942b8a30937d 100644
--- a/include/asm-m32r/sigcontext.h
+++ b/include/asm-m32r/sigcontext.h
@@ -32,6 +32,8 @@ struct sigcontext {
 #elif defined(CONFIG_ISA_M32R2) || defined(CONFIG_ISA_M32R)
 	unsigned long sc_acch;
 	unsigned long sc_accl;
+	unsigned long sc_dummy_acc1h;
+	unsigned long sc_dummy_acc1l;
 #else
 #error unknown isa configuration
 #endif
diff --git a/include/asm-m32r/system.h b/include/asm-m32r/system.h
index c5ab5da56d21..e55013f378e5 100644
--- a/include/asm-m32r/system.h
+++ b/include/asm-m32r/system.h
@@ -6,8 +6,8 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  *
- * Copyright (C) 2001  by Hiroyuki Kondo, Hirokazu Takata, and Hitoshi Yamamoto
- * Copyright (C) 2004  Hirokazu Takata <takata at linux-m32r.org>
+ * Copyright (C) 2001  Hiroyuki Kondo, Hirokazu Takata, and Hitoshi Yamamoto
+ * Copyright (C) 2004, 2006  Hirokazu Takata <takata at linux-m32r.org>
  */
 
 #include <linux/config.h>
@@ -19,49 +19,28 @@
  * switch_to(prev, next) should switch from task `prev' to `next'
  * `prev' will never be the same as `next'.
  *
- * `next' and `prev' should be struct task_struct, but it isn't always defined
+ * `next' and `prev' should be task_t, but it isn't always defined
  */
 
 #define switch_to(prev, next, last)  do { \
-	register unsigned long  arg0 __asm__ ("r0") = (unsigned long)prev; \
-	register unsigned long  arg1 __asm__ ("r1") = (unsigned long)next; \
-	register unsigned long  *oldsp __asm__ ("r2") = &(prev->thread.sp); \
-	register unsigned long  *newsp __asm__ ("r3") = &(next->thread.sp); \
-	register unsigned long  *oldlr __asm__ ("r4") = &(prev->thread.lr); \
-	register unsigned long  *newlr __asm__ ("r5") = &(next->thread.lr); \
-	register struct task_struct  *__last __asm__ ("r6"); \
 	__asm__ __volatile__ ( \
-		"st     r8, @-r15                                 \n\t" \
-		"st     r9, @-r15                                 \n\t" \
-		"st    r10, @-r15                                 \n\t" \
-		"st    r11, @-r15                                 \n\t" \
-		"st    r12, @-r15                                 \n\t" \
-		"st    r13, @-r15                                 \n\t" \
-		"st    r14, @-r15                                 \n\t" \
-		"seth  r14, #high(1f)                             \n\t" \
-		"or3   r14, r14, #low(1f)                         \n\t" \
-		"st    r14, @r4    ; store old LR                 \n\t" \
-		"st    r15, @r2    ; store old SP                 \n\t" \
-		"ld    r15, @r3    ; load new SP                  \n\t" \
-		"st     r0, @-r15  ; store 'prev' onto new stack  \n\t" \
-		"ld    r14, @r5    ; load new LR                  \n\t" \
-		"jmp   r14                                        \n\t" \
-		".fillinsn                                        \n  " \
-		"1:                                               \n\t" \
-		"ld     r6, @r15+  ; load 'prev' from new stack   \n\t" \
-		"ld    r14, @r15+                                 \n\t" \
-		"ld    r13, @r15+                                 \n\t" \
-		"ld    r12, @r15+                                 \n\t" \
-		"ld    r11, @r15+                                 \n\t" \
-		"ld    r10, @r15+                                 \n\t" \
-		"ld     r9, @r15+                                 \n\t" \
-		"ld     r8, @r15+                                 \n\t" \
-		: "=&r" (__last) \
-		: "r" (arg0), "r" (arg1), "r" (oldsp), "r" (newsp), \
-		  "r" (oldlr), "r" (newlr) \
-		: "memory" \
+		"	seth	lr, #high(1f)				\n" \
+		"	or3	lr, lr, #low(1f)			\n" \
+		"	st	lr, @%4  ; store old LR			\n" \
+		"	ld	lr, @%5  ; load new LR			\n" \
+		"	st	sp, @%2  ; store old SP			\n" \
+		"	ld	sp, @%3  ; load new SP			\n" \
+		"	push	%1  ; store `prev' on new stack		\n" \
+		"	jmp	lr					\n" \
+		"	.fillinsn					\n" \
+		"1:							\n" \
+		"	pop	%0  ; restore `__last' from new stack	\n" \
+		: "=r" (last) \
+		: "0" (prev), \
+		  "r" (&(prev->thread.sp)), "r" (&(next->thread.sp)), \
+		  "r" (&(prev->thread.lr)), "r" (&(next->thread.lr)) \
+		: "memory", "lr" \
 	); \
-	last = __last; \
 } while(0)
 
 /*
@@ -167,8 +146,8 @@ extern void  __xchg_called_with_bad_pointer(void);
 #define DCACHE_CLEAR(reg0, reg1, addr)
 #endif	/* CONFIG_CHIP_M32700_TS1 */
 
-static __inline__ unsigned long __xchg(unsigned long x, volatile void * ptr,
-	int size)
+static inline unsigned long
+__xchg(unsigned long x, volatile void * ptr, int size)
 {
 	unsigned long flags;
 	unsigned long tmp = 0;
@@ -220,7 +199,7 @@ static __inline__ unsigned long __xchg(unsigned long x, volatile void * ptr,
 
 #define __HAVE_ARCH_CMPXCHG	1
 
-static __inline__ unsigned long
+static inline unsigned long
 __cmpxchg_u32(volatile unsigned int *p, unsigned int old, unsigned int new)
 {
 	unsigned long flags;
@@ -254,7 +233,7 @@ __cmpxchg_u32(volatile unsigned int *p, unsigned int old, unsigned int new)
    if something tries to do an invalid cmpxchg().  */
 extern void __cmpxchg_called_with_bad_pointer(void);
 
-static __inline__ unsigned long
+static inline unsigned long
 __cmpxchg(volatile void *ptr, unsigned long old, unsigned long new, int size)
 {
 	switch (size) {
diff --git a/include/asm-mips/addrspace.h b/include/asm-mips/addrspace.h
index 42520cc84b0f..1386af1cb7d9 100644
--- a/include/asm-mips/addrspace.h
+++ b/include/asm-mips/addrspace.h
@@ -129,6 +129,7 @@
 #if defined (CONFIG_CPU_R4300)						\
     || defined (CONFIG_CPU_R4X00)					\
     || defined (CONFIG_CPU_R5000)					\
+    || defined (CONFIG_CPU_RM7000)					\
     || defined (CONFIG_CPU_NEVADA)					\
     || defined (CONFIG_CPU_TX49XX)					\
     || defined (CONFIG_CPU_MIPS64)
diff --git a/include/asm-mips/asmmacro.h b/include/asm-mips/asmmacro.h
index 30b18ea6cb11..f54aa147ec19 100644
--- a/include/asm-mips/asmmacro.h
+++ b/include/asm-mips/asmmacro.h
@@ -17,7 +17,26 @@
 #ifdef CONFIG_64BIT
 #include <asm/asmmacro-64.h>
 #endif
+#ifdef CONFIG_MIPS_MT_SMTC
+#include <asm/mipsmtregs.h>
+#endif
 
+#ifdef CONFIG_MIPS_MT_SMTC
+	.macro	local_irq_enable reg=t0
+	mfc0	\reg, CP0_TCSTATUS
+	ori	\reg, \reg, TCSTATUS_IXMT
+	xori	\reg, \reg, TCSTATUS_IXMT
+	mtc0	\reg, CP0_TCSTATUS
+	ehb
+	.endm
+
+	.macro	local_irq_disable reg=t0
+	mfc0	\reg, CP0_TCSTATUS
+	ori	\reg, \reg, TCSTATUS_IXMT
+	mtc0	\reg, CP0_TCSTATUS
+	ehb
+	.endm
+#else
 	.macro	local_irq_enable reg=t0
 	mfc0	\reg, CP0_STATUS
 	ori	\reg, \reg, 1
@@ -32,6 +51,7 @@
 	mtc0	\reg, CP0_STATUS
 	irq_disable_hazard
 	.endm
+#endif /* CONFIG_MIPS_MT_SMTC */
 
 #ifdef CONFIG_CPU_SB1
 	.macro	fpu_enable_hazard
@@ -48,4 +68,31 @@
 	.endm
 #endif
 
+/*
+ * Temporary until all gas have MT ASE support
+ */
+	.macro	DMT	reg=0
+	.word	(0x41600bc1 | (\reg << 16))
+	.endm
+
+	.macro	EMT	reg=0
+	.word	(0x41600be1 | (\reg << 16))
+	.endm
+
+	.macro	DVPE	reg=0
+	.word	(0x41600001 | (\reg << 16))
+	.endm
+
+	.macro	EVPE	reg=0
+	.word	(0x41600021 | (\reg << 16))
+	.endm
+
+	.macro	MFTR	rt=0, rd=0, u=0, sel=0
+	 .word	(0x41000000 | (\rt << 16) | (\rd << 11) | (\u << 5) | (\sel))
+	.endm
+
+	.macro	MTTR	rt=0, rd=0, u=0, sel=0
+	 .word	(0x41800000 | (\rt << 16) | (\rd << 11) | (\u << 5) | (\sel))
+	.endm
+
 #endif /* _ASM_ASMMACRO_H */
diff --git a/include/asm-mips/bitops.h b/include/asm-mips/bitops.h
index a1728f8c0705..d2f444537e4b 100644
--- a/include/asm-mips/bitops.h
+++ b/include/asm-mips/bitops.h
@@ -467,64 +467,56 @@ static inline unsigned long __ffs(unsigned long word)
 }
 
 /*
- * ffs - find first bit set.
+ * fls - find last bit set.
  * @word: The word to search
  *
- * Returns 1..SZLONG
- * Returns 0 if no bit exists
+ * This is defined the same way as ffs.
+ * Note fls(0) = 0, fls(1) = 1, fls(0x80000000) = 32.
  */
-
-static inline unsigned long ffs(unsigned long word)
+static inline int fls(int word)
 {
-	if (!word)
-		return 0;
+	__asm__ ("clz %0, %1" : "=r" (word) : "r" (word));
 
-	return __ffs(word) + 1;
+	return 32 - word;
 }
 
-/*
- * ffz - find first zero in word.
- * @word: The word to search
- *
- * Undefined if no zero exists, so code should check against ~0UL first.
- */
-static inline unsigned long ffz(unsigned long word)
+#if defined(CONFIG_64BIT) && defined(CONFIG_CPU_MIPS64)
+static inline int fls64(__u64 word)
 {
-	return __ffs (~word);
+	__asm__ ("dclz %0, %1" : "=r" (word) : "r" (word));
+
+	return 64 - word;
 }
+#else
+#include <asm-generic/bitops/fls64.h>
+#endif
 
 /*
- * fls - find last bit set.
+ * ffs - find first bit set.
  * @word: The word to search
  *
- * Returns 1..SZLONG
- * Returns 0 if no bit exists
+ * This is defined the same way as
+ * the libc and compiler builtin ffs routines, therefore
+ * differs in spirit from the above ffz (man ffs).
  */
-static inline unsigned long fls(unsigned long word)
+static inline int ffs(int word)
 {
-#ifdef CONFIG_CPU_MIPS32
-	__asm__ ("clz %0, %1" : "=r" (word) : "r" (word));
-
-	return 32 - word;
-#endif
-
-#ifdef CONFIG_CPU_MIPS64
-	__asm__ ("dclz %0, %1" : "=r" (word) : "r" (word));
+	if (!word)
+		return 0;
 
-	return 64 - word;
-#endif
+	return fls(word & -word);
 }
 
 #else
 
 #include <asm-generic/bitops/__ffs.h>
 #include <asm-generic/bitops/ffs.h>
-#include <asm-generic/bitops/ffz.h>
 #include <asm-generic/bitops/fls.h>
+#include <asm-generic/bitops/fls64.h>
 
 #endif /*defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64) */
 
-#include <asm-generic/bitops/fls64.h>
+#include <asm-generic/bitops/ffz.h>
 #include <asm-generic/bitops/find.h>
 
 #ifdef __KERNEL__
diff --git a/include/asm-mips/cacheflush.h b/include/asm-mips/cacheflush.h
index aeae9fabf4a9..47bc8f6c20d2 100644
--- a/include/asm-mips/cacheflush.h
+++ b/include/asm-mips/cacheflush.h
@@ -74,6 +74,7 @@ static inline void copy_from_user_page(struct vm_area_struct *vma,
 
 extern void (*flush_cache_sigtramp)(unsigned long addr);
 extern void (*flush_icache_all)(void);
+extern void (*local_flush_data_cache_page)(void * addr);
 extern void (*flush_data_cache_page)(unsigned long addr);
 
 /*
diff --git a/include/asm-mips/cpu-features.h b/include/asm-mips/cpu-features.h
index 3f2b6d9ac45e..254e11ed247b 100644
--- a/include/asm-mips/cpu-features.h
+++ b/include/asm-mips/cpu-features.h
@@ -40,7 +40,7 @@
 #define cpu_has_sb1_cache	(cpu_data[0].options & MIPS_CPU_SB1_CACHE)
 #endif
 #ifndef cpu_has_fpu
-#define cpu_has_fpu		(cpu_data[0].options & MIPS_CPU_FPU)
+#define cpu_has_fpu		(current_cpu_data.options & MIPS_CPU_FPU)
 #endif
 #ifndef cpu_has_32fpr
 #define cpu_has_32fpr		(cpu_data[0].options & MIPS_CPU_32FPR)
diff --git a/include/asm-mips/cpu-info.h b/include/asm-mips/cpu-info.h
index 140be1c67da7..6572ac703662 100644
--- a/include/asm-mips/cpu-info.h
+++ b/include/asm-mips/cpu-info.h
@@ -73,6 +73,16 @@ struct cpuinfo_mips {
 	struct cache_desc	dcache;	/* Primary D or combined I/D cache */
 	struct cache_desc	scache;	/* Secondary cache */
 	struct cache_desc	tcache;	/* Tertiary/split secondary cache */
+#if defined(CONFIG_MIPS_MT_SMTC)
+	/*
+	 * In the MIPS MT "SMTC" model, each TC is considered
+	 * to be a "CPU" for the purposes of scheduling, but
+	 * exception resources, ASID spaces, etc, are common
+	 * to all TCs within the same VPE.
+	 */
+	int			vpe_id;  /* Virtual Processor number */
+	int			tc_id;   /* Thread Context number */
+#endif /* CONFIG_MIPS_MT */
 	void 			*data;	/* Additional data */
 } __attribute__((aligned(SMP_CACHE_BYTES)));
 
diff --git a/include/asm-mips/cpu.h b/include/asm-mips/cpu.h
index 818b9a97e214..dff2a0a52f8f 100644
--- a/include/asm-mips/cpu.h
+++ b/include/asm-mips/cpu.h
@@ -51,6 +51,7 @@
 #define PRID_IMP_R4300		0x0b00
 #define PRID_IMP_VR41XX		0x0c00
 #define PRID_IMP_R12000		0x0e00
+#define PRID_IMP_R14000		0x0f00
 #define PRID_IMP_R8000		0x1000
 #define PRID_IMP_PR4450		0x1200
 #define PRID_IMP_R4600		0x2000
@@ -87,6 +88,7 @@
 #define PRID_IMP_24K		0x9300
 #define PRID_IMP_34K		0x9500
 #define PRID_IMP_24KE		0x9600
+#define PRID_IMP_74K		0x9700
 
 /*
  * These are the PRID's for when 23:16 == PRID_COMP_SIBYTE
@@ -196,7 +198,9 @@
 #define CPU_34K			60
 #define CPU_PR4450		61
 #define CPU_SB1A		62
-#define CPU_LAST		62
+#define CPU_74K			63
+#define CPU_R14000		64
+#define CPU_LAST		64
 
 /*
  * ISA Level encodings
diff --git a/include/asm-mips/delay.h b/include/asm-mips/delay.h
index 64dd45150f64..928f30f8c45c 100644
--- a/include/asm-mips/delay.h
+++ b/include/asm-mips/delay.h
@@ -19,20 +19,22 @@ static inline void __delay(unsigned long loops)
 {
 	if (sizeof(long) == 4)
 		__asm__ __volatile__ (
-		".set\tnoreorder\n"
-		"1:\tbnez\t%0,1b\n\t"
-		"subu\t%0,1\n\t"
-		".set\treorder"
+		"	.set	noreorder				\n"
+		"	.align	3					\n"
+		"1:	bnez	%0, 1b					\n"
+		"	subu	%0, 1					\n"
+		"	.set	reorder					\n"
 		: "=r" (loops)
 		: "0" (loops));
 	else if (sizeof(long) == 8)
 		__asm__ __volatile__ (
-		".set\tnoreorder\n"
-		"1:\tbnez\t%0,1b\n\t"
-		"dsubu\t%0,1\n\t"
-		".set\treorder"
-		:"=r" (loops)
-		:"0" (loops));
+		"	.set	noreorder				\n"
+		"	.align	3					\n"
+		"1:	bnez	%0, 1b					\n"
+		"	dsubu	%0, 1					\n"
+		"	.set	reorder					\n"
+		: "=r" (loops)
+		: "0" (loops));
 }
 
 
diff --git a/include/asm-mips/ds1742.h b/include/asm-mips/ds1742.h
new file mode 100644
index 000000000000..c2f2c32da637
--- /dev/null
+++ b/include/asm-mips/ds1742.h
@@ -0,0 +1,13 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2006 by Ralf Baechle (ralf@linux-mips.org)
+ */
+#ifndef _ASM_DS1742_H
+#define _ASM_DS1742_H
+
+#include <ds1742.h>
+
+#endif /* _ASM_DS1742_H */
diff --git a/include/asm-mips/elf.h b/include/asm-mips/elf.h
index 851f013adad3..bdc9de2df1ef 100644
--- a/include/asm-mips/elf.h
+++ b/include/asm-mips/elf.h
@@ -119,8 +119,49 @@
 #define SHT_MIPS_CONFLICT	0x70000002
 #define SHT_MIPS_GPTAB		0x70000003
 #define SHT_MIPS_UCODE		0x70000004
-
-#define SHF_MIPS_GPREL	0x10000000
+#define SHT_MIPS_DEBUG		0x70000005
+#define SHT_MIPS_REGINFO	0x70000006
+#define SHT_MIPS_PACKAGE	0x70000007
+#define SHT_MIPS_PACKSYM	0x70000008
+#define SHT_MIPS_RELD		0x70000009
+#define SHT_MIPS_IFACE		0x7000000b
+#define SHT_MIPS_CONTENT	0x7000000c
+#define SHT_MIPS_OPTIONS	0x7000000d
+#define SHT_MIPS_SHDR		0x70000010
+#define SHT_MIPS_FDESC		0x70000011
+#define SHT_MIPS_EXTSYM		0x70000012
+#define SHT_MIPS_DENSE		0x70000013
+#define SHT_MIPS_PDESC		0x70000014
+#define SHT_MIPS_LOCSYM		0x70000015
+#define SHT_MIPS_AUXSYM		0x70000016
+#define SHT_MIPS_OPTSYM		0x70000017
+#define SHT_MIPS_LOCSTR		0x70000018
+#define SHT_MIPS_LINE		0x70000019
+#define SHT_MIPS_RFDESC		0x7000001a
+#define SHT_MIPS_DELTASYM	0x7000001b
+#define SHT_MIPS_DELTAINST	0x7000001c
+#define SHT_MIPS_DELTACLASS	0x7000001d
+#define SHT_MIPS_DWARF		0x7000001e
+#define SHT_MIPS_DELTADECL	0x7000001f
+#define SHT_MIPS_SYMBOL_LIB	0x70000020
+#define SHT_MIPS_EVENTS		0x70000021
+#define SHT_MIPS_TRANSLATE	0x70000022
+#define SHT_MIPS_PIXIE		0x70000023
+#define SHT_MIPS_XLATE		0x70000024
+#define SHT_MIPS_XLATE_DEBUG	0x70000025
+#define SHT_MIPS_WHIRL		0x70000026
+#define SHT_MIPS_EH_REGION	0x70000027
+#define SHT_MIPS_XLATE_OLD	0x70000028
+#define SHT_MIPS_PDR_EXCEPTION	0x70000029
+
+#define SHF_MIPS_GPREL		0x10000000
+#define SHF_MIPS_MERGE		0x20000000
+#define SHF_MIPS_ADDR		0x40000000
+#define SHF_MIPS_STRING		0x80000000
+#define SHF_MIPS_NOSTRIP	0x08000000
+#define SHF_MIPS_LOCAL		0x04000000
+#define SHF_MIPS_NAMES		0x02000000
+#define SHF_MIPS_NODUPES	0x01000000
 
 #ifndef ELF_ARCH
 /* ELF register definitions */
diff --git a/include/asm-mips/fpu.h b/include/asm-mips/fpu.h
index 9c828b1f8218..b0f50015e252 100644
--- a/include/asm-mips/fpu.h
+++ b/include/asm-mips/fpu.h
@@ -21,6 +21,10 @@
 #include <asm/processor.h>
 #include <asm/current.h>
 
+#ifdef CONFIG_MIPS_MT_FPAFF
+#include <asm/mips_mt.h>
+#endif
+
 struct sigcontext;
 struct sigcontext32;
 
diff --git a/include/asm-mips/futex.h b/include/asm-mips/futex.h
index a554089991f2..12d118f1bc9c 100644
--- a/include/asm-mips/futex.h
+++ b/include/asm-mips/futex.h
@@ -7,6 +7,7 @@
 #include <linux/futex.h>
 #include <asm/errno.h>
 #include <asm/uaccess.h>
+#include <asm/war.h>
 
 #ifdef CONFIG_SMP
 #define __FUTEX_SMP_SYNC "	sync					\n"
@@ -16,30 +17,58 @@
 
 #define __futex_atomic_op(insn, ret, oldval, uaddr, oparg)		\
 {									\
-	__asm__ __volatile__(						\
-	"	.set	push					\n"	\
-	"	.set	noat					\n"	\
-	"	.set	mips3					\n"	\
-	"1:	ll	%1, (%3)	# __futex_atomic_op1	\n"	\
-	"	.set	mips0					\n"	\
-	"	" insn	"					\n"	\
-	"	.set	mips3					\n"	\
-	"2:	sc	$1, (%3)				\n"	\
-	"	beqzl	$1, 1b					\n"	\
-	__FUTEX_SMP_SYNC						\
-	"3:							\n"	\
-	"	.set	pop					\n"	\
-	"	.set	mips0					\n"	\
-	"	.section .fixup,\"ax\"				\n"	\
-	"4:	li	%0, %5					\n"	\
-	"	j	2b					\n"	\
-	"	.previous					\n"	\
-	"	.section __ex_table,\"a\"			\n"	\
-	"	"__UA_ADDR "\t1b, 4b				\n"	\
-	"	"__UA_ADDR "\t2b, 4b				\n"	\
-	"	.previous					\n"	\
-	: "=r" (ret), "=r" (oldval)					\
-	: "0" (0), "r" (uaddr), "Jr" (oparg), "i" (-EFAULT));		\
+	if (cpu_has_llsc && R10000_LLSC_WAR) {				\
+		__asm__ __volatile__(					\
+		"	.set	push				\n"	\
+		"	.set	noat				\n"	\
+		"	.set	mips3				\n"	\
+		"1:	ll	%1, (%3)	# __futex_atomic_op	\n" \
+		"	.set	mips0				\n"	\
+		"	" insn	"				\n"	\
+		"	.set	mips3				\n"	\
+		"2:	sc	$1, (%3)			\n"	\
+		"	beqzl	$1, 1b				\n"	\
+		__FUTEX_SMP_SYNC					\
+		"3:						\n"	\
+		"	.set	pop				\n"	\
+		"	.set	mips0				\n"	\
+		"	.section .fixup,\"ax\"			\n"	\
+		"4:	li	%0, %5				\n"	\
+		"	j	2b				\n"	\
+		"	.previous				\n"	\
+		"	.section __ex_table,\"a\"		\n"	\
+		"	"__UA_ADDR "\t1b, 4b			\n"	\
+		"	"__UA_ADDR "\t2b, 4b			\n"	\
+		"	.previous				\n"	\
+		: "=r" (ret), "=r" (oldval)				\
+		: "0" (0), "r" (uaddr), "Jr" (oparg), "i" (-EFAULT));	\
+	} else if (cpu_has_llsc) {					\
+		__asm__ __volatile__(					\
+		"	.set	push				\n"	\
+		"	.set	noat				\n"	\
+		"	.set	mips3				\n"	\
+		"1:	ll	%1, (%3)	# __futex_atomic_op	\n" \
+		"	.set	mips0				\n"	\
+		"	" insn	"				\n"	\
+		"	.set	mips3				\n"	\
+		"2:	sc	$1, (%3)			\n"	\
+		"	beqz	$1, 1b				\n"	\
+		__FUTEX_SMP_SYNC					\
+		"3:						\n"	\
+		"	.set	pop				\n"	\
+		"	.set	mips0				\n"	\
+		"	.section .fixup,\"ax\"			\n"	\
+		"4:	li	%0, %5				\n"	\
+		"	j	2b				\n"	\
+		"	.previous				\n"	\
+		"	.section __ex_table,\"a\"		\n"	\
+		"	"__UA_ADDR "\t1b, 4b			\n"	\
+		"	"__UA_ADDR "\t2b, 4b			\n"	\
+		"	.previous				\n"	\
+		: "=r" (ret), "=r" (oldval)				\
+		: "0" (0), "r" (uaddr), "Jr" (oparg), "i" (-EFAULT));	\
+	} else								\
+		ret = -ENOSYS;						\
 }
 
 static inline int
@@ -102,7 +131,69 @@ futex_atomic_op_inuser (int encoded_op, int __user *uaddr)
 static inline int
 futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval)
 {
-	return -ENOSYS;
+	int retval;
+
+	if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int)))
+		return -EFAULT;
+
+	if (cpu_has_llsc && R10000_LLSC_WAR) {
+		__asm__ __volatile__(
+		"# futex_atomic_cmpxchg_inatomic			\n"
+		"	.set	push					\n"
+		"	.set	noat					\n"
+		"	.set	mips3					\n"
+		"1:	ll	%0, %2					\n"
+		"	bne	%0, %z3, 3f				\n"
+		"	.set	mips0					\n"
+		"	move	$1, %z4					\n"
+		"	.set	mips3					\n"
+		"2:	sc	$1, %1					\n"
+		"	beqzl	$1, 1b					\n"
+		__FUTEX_SMP_SYNC
+		"3:							\n"
+		"	.set	pop					\n"
+		"	.section .fixup,\"ax\"				\n"
+		"4:	li	%0, %5					\n"
+		"	j	3b					\n"
+		"	.previous					\n"
+		"	.section __ex_table,\"a\"			\n"
+		"	"__UA_ADDR "\t1b, 4b				\n"
+		"	"__UA_ADDR "\t2b, 4b				\n"
+		"	.previous					\n"
+		: "=&r" (retval), "=R" (*uaddr)
+		: "R" (*uaddr), "Jr" (oldval), "Jr" (newval), "i" (-EFAULT)
+		: "memory");
+	} else if (cpu_has_llsc) {
+		__asm__ __volatile__(
+		"# futex_atomic_cmpxchg_inatomic			\n"
+		"	.set	push					\n"
+		"	.set	noat					\n"
+		"	.set	mips3					\n"
+		"1:	ll	%0, %2					\n"
+		"	bne	%0, %z3, 3f				\n"
+		"	.set	mips0					\n"
+		"	move	$1, %z4					\n"
+		"	.set	mips3					\n"
+		"2:	sc	$1, %1					\n"
+		"	beqz	$1, 1b					\n"
+		__FUTEX_SMP_SYNC
+		"3:							\n"
+		"	.set	pop					\n"
+		"	.section .fixup,\"ax\"				\n"
+		"4:	li	%0, %5					\n"
+		"	j	3b					\n"
+		"	.previous					\n"
+		"	.section __ex_table,\"a\"			\n"
+		"	"__UA_ADDR "\t1b, 4b				\n"
+		"	"__UA_ADDR "\t2b, 4b				\n"
+		"	.previous					\n"
+		: "=&r" (retval), "=R" (*uaddr)
+		: "R" (*uaddr), "Jr" (oldval), "Jr" (newval), "i" (-EFAULT)
+		: "memory");
+	} else
+		return -ENOSYS;
+
+	return retval;
 }
 
 #endif
diff --git a/include/asm-mips/hazards.h b/include/asm-mips/hazards.h
index feb29a793888..dadc05188db7 100644
--- a/include/asm-mips/hazards.h
+++ b/include/asm-mips/hazards.h
@@ -284,6 +284,8 @@ do {									\
 #define instruction_hazard() do { } while (0)
 #endif
 
+extern void mips_ihb(void);
+
 #endif /* __ASSEMBLY__ */
 
 #endif /* _ASM_HAZARDS_H */
diff --git a/include/asm-mips/inst.h b/include/asm-mips/inst.h
index e0745f4ff624..1ed8d0f62577 100644
--- a/include/asm-mips/inst.h
+++ b/include/asm-mips/inst.h
@@ -6,6 +6,7 @@
  * for more details.
  *
  * Copyright (C) 1996, 2000 by Ralf Baechle
+ * Copyright (C) 2006 by Thiemo Seufer
  */
 #ifndef _ASM_INST_H
 #define _ASM_INST_H
@@ -21,14 +22,14 @@ enum major_op {
 	cop0_op, cop1_op, cop2_op, cop1x_op,
 	beql_op, bnel_op, blezl_op, bgtzl_op,
 	daddi_op, daddiu_op, ldl_op, ldr_op,
-	major_1c_op, jalx_op, major_1e_op, major_1f_op,
+	spec2_op, jalx_op, mdmx_op, spec3_op,
 	lb_op, lh_op, lwl_op, lw_op,
 	lbu_op, lhu_op, lwr_op, lwu_op,
 	sb_op, sh_op, swl_op, sw_op,
 	sdl_op, sdr_op, swr_op, cache_op,
 	ll_op, lwc1_op, lwc2_op, pref_op,
 	lld_op, ldc1_op, ldc2_op, ld_op,
-	sc_op, swc1_op, swc2_op, rdhwr_op,
+	sc_op, swc1_op, swc2_op, major_3b_op,
 	scd_op, sdc1_op, sdc2_op, sd_op
 };
 
@@ -37,7 +38,7 @@ enum major_op {
  */
 enum spec_op {
 	sll_op, movc_op, srl_op, sra_op,
-	sllv_op, srlv_op, srav_op, spec1_unused_op, /* Opcode 0x07 is unused */
+	sllv_op, pmon_op, srlv_op, srav_op,
 	jr_op, jalr_op, movz_op, movn_op,
 	syscall_op, break_op, spim_op, sync_op,
 	mfhi_op, mthi_op, mflo_op, mtlo_op,
@@ -55,6 +56,28 @@ enum spec_op {
 };
 
 /*
+ * func field of spec2 opcode.
+ */
+enum spec2_op {
+	madd_op, maddu_op, mul_op, spec2_3_unused_op,
+	msub_op, msubu_op, /* more unused ops */
+	clz_op = 0x20, clo_op,
+	dclz_op = 0x24, dclo_op,
+	sdbpp_op = 0x3f
+};
+
+/*
+ * func field of spec3 opcode.
+ */
+enum spec3_op {
+	ext_op, dextm_op, dextu_op, dext_op,
+	ins_op, dinsm_op, dinsu_op, dins_op,
+	bshfl_op = 0x20,
+	dbshfl_op = 0x24,
+	rdhwr_op = 0x3f
+};
+
+/*
  * rt field of bcond opcodes.
  */
 enum rt_op {
@@ -151,8 +174,8 @@ enum cop1x_func {
  * func field for mad opcodes (MIPS IV).
  */
 enum mad_func {
-	madd_op      = 0x08, msub_op      = 0x0a,
-	nmadd_op     = 0x0c, nmsub_op     = 0x0e
+	madd_fp_op      = 0x08, msub_fp_op      = 0x0a,
+	nmadd_fp_op     = 0x0c, nmsub_fp_op     = 0x0e
 };
 
 /*
diff --git a/include/asm-mips/interrupt.h b/include/asm-mips/interrupt.h
index 774348734fa0..4bb9c06f4410 100644
--- a/include/asm-mips/interrupt.h
+++ b/include/asm-mips/interrupt.h
@@ -19,7 +19,12 @@ __asm__ (
 	"	.set	push						\n"
 	"	.set	reorder						\n"
 	"	.set	noat						\n"
-#ifdef CONFIG_CPU_MIPSR2
+#ifdef CONFIG_MIPS_MT_SMTC
+	"	mfc0	$1, $2, 1	# SMTC - clear TCStatus.IXMT	\n"
+	"	ori	$1, 0x400					\n"
+	"	xori	$1, 0x400					\n"
+	"	mtc0	$1, $2, 1					\n"
+#elif defined(CONFIG_CPU_MIPSR2)
 	"	ei							\n"
 #else
 	"	mfc0	$1,$12						\n"
@@ -62,7 +67,12 @@ __asm__ (
 	"	.macro	local_irq_disable\n"
 	"	.set	push						\n"
 	"	.set	noat						\n"
-#ifdef CONFIG_CPU_MIPSR2
+#ifdef CONFIG_MIPS_MT_SMTC
+	"	mfc0	$1, $2, 1					\n"
+	"	ori	$1, 0x400					\n"
+	"	.set	noreorder					\n"
+	"	mtc0	$1, $2, 1					\n"
+#elif defined(CONFIG_CPU_MIPSR2)
 	"	di							\n"
 #else
 	"	mfc0	$1,$12						\n"
@@ -88,7 +98,11 @@ __asm__ (
 	"	.macro	local_save_flags flags				\n"
 	"	.set	push						\n"
 	"	.set	reorder						\n"
+#ifdef CONFIG_MIPS_MT_SMTC
+	"	mfc0	\\flags, $2, 1					\n"
+#else
 	"	mfc0	\\flags, $12					\n"
+#endif
 	"	.set	pop						\n"
 	"	.endm							\n");
 
@@ -102,7 +116,13 @@ __asm__ (
 	"	.set	push						\n"
 	"	.set	reorder						\n"
 	"	.set	noat						\n"
-#ifdef CONFIG_CPU_MIPSR2
+#ifdef CONFIG_MIPS_MT_SMTC
+	"	mfc0	\\result, $2, 1					\n"
+	"	ori	$1, \\result, 0x400				\n"
+	"	.set	noreorder					\n"
+	"	mtc0	$1, $2, 1					\n"
+	"	andi	\\result, \\result, 0x400			\n"
+#elif defined(CONFIG_CPU_MIPSR2)
 	"	di	\\result					\n"
 	"	andi	\\result, 1					\n"
 #else
@@ -128,7 +148,14 @@ __asm__ (
 	"	.set	push						\n"
 	"	.set	noreorder					\n"
 	"	.set	noat						\n"
-#if defined(CONFIG_CPU_MIPSR2) && defined(CONFIG_IRQ_CPU)
+#ifdef CONFIG_MIPS_MT_SMTC
+	"mfc0	$1, $2, 1						\n"
+	"andi	\\flags, 0x400						\n"
+	"ori	$1, 0x400						\n"
+	"xori	$1, 0x400						\n"
+	"or	\\flags, $1						\n"
+	"mtc0	\\flags, $2, 1						\n"
+#elif defined(CONFIG_CPU_MIPSR2) && defined(CONFIG_IRQ_CPU)
 	/*
 	 * Slow, but doesn't suffer from a relativly unlikely race
 	 * condition we're having since days 1.
@@ -167,11 +194,29 @@ do {									\
 		: "memory");						\
 } while(0)
 
-#define irqs_disabled()							\
-({									\
-	unsigned long flags;						\
-	local_save_flags(flags);					\
-	!(flags & 1);							\
-})
+static inline int irqs_disabled(void)
+{
+#ifdef CONFIG_MIPS_MT_SMTC
+	/*
+	 * SMTC model uses TCStatus.IXMT to disable interrupts for a thread/CPU
+	 */
+	unsigned long __result;
+
+	__asm__ __volatile__(
+	"	.set	noreorder					\n"
+	"	mfc0	%0, $2, 1					\n"
+	"	andi	%0, 0x400					\n"
+	"	slt	%0, $0, %0					\n"
+	"	.set	reorder						\n"
+	: "=r" (__result));
+
+	return __result;
+#else
+	unsigned long flags;
+	local_save_flags(flags);
+
+	return !(flags & 1);
+#endif
+}
 
 #endif /* _ASM_INTERRUPT_H */
diff --git a/include/asm-mips/irq.h b/include/asm-mips/irq.h
index 8a342ccb34a8..dde677f02bc0 100644
--- a/include/asm-mips/irq.h
+++ b/include/asm-mips/irq.h
@@ -11,6 +11,9 @@
 
 #include <linux/config.h>
 #include <linux/linkage.h>
+
+#include <asm/mipsmtregs.h>
+
 #include <irq.h>
 
 #ifdef CONFIG_I8259
@@ -26,6 +29,23 @@ struct pt_regs;
 
 extern asmlinkage unsigned int do_IRQ(unsigned int irq, struct pt_regs *regs);
 
+#ifdef CONFIG_MIPS_MT_SMTC
+/*
+ * Clear interrupt mask handling "backstop" if irq_hwmask
+ * entry so indicates. This implies that the ack() or end()
+ * functions will take over re-enabling the low-level mask.
+ * Otherwise it will be done on return from exception.
+ */
+#define __DO_IRQ_SMTC_HOOK()						\
+do {									\
+	if (irq_hwmask[irq] & 0x0000ff00)				\
+		write_c0_tccontext(read_c0_tccontext() &		\
+		                   ~(irq_hwmask[irq] & 0x0000ff00));	\
+} while (0)
+#else
+#define __DO_IRQ_SMTC_HOOK() do { } while (0)
+#endif
+
 #ifdef CONFIG_PREEMPT
 
 /*
@@ -39,6 +59,7 @@ extern asmlinkage unsigned int do_IRQ(unsigned int irq, struct pt_regs *regs);
 #define do_IRQ(irq, regs)						\
 do {									\
 	irq_enter();							\
+	__DO_IRQ_SMTC_HOOK();						\
 	__do_IRQ((irq), (regs));					\
 	irq_exit();							\
 } while (0)
@@ -46,5 +67,14 @@ do {									\
 #endif
 
 extern void arch_init_irq(void);
+extern void spurious_interrupt(struct pt_regs *regs);
+
+#ifdef CONFIG_MIPS_MT_SMTC
+struct irqaction;
+
+extern unsigned long irq_hwmask[];
+extern int setup_irq_smtc(unsigned int irq, struct irqaction * new,
+                          unsigned long hwmask);
+#endif /* CONFIG_MIPS_MT_SMTC */
 
 #endif /* _ASM_IRQ_H */
diff --git a/include/asm-mips/kspd.h b/include/asm-mips/kspd.h
new file mode 100644
index 000000000000..4e9e724c8935
--- /dev/null
+++ b/include/asm-mips/kspd.h
@@ -0,0 +1,36 @@
+/*
+ * Copyright (C) 2005 MIPS Technologies, Inc.  All rights reserved.
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ */
+
+#ifndef _ASM_KSPD_H
+#define _ASM_KSPD_H
+
+struct kspd_notifications {
+	void (*kspd_sp_exit)(int sp_id);
+
+	struct list_head list;
+};
+
+#ifdef CONFIG_MIPS_APSP_KSPD
+extern void kspd_notify(struct kspd_notifications *notify);
+#else
+static inline void kspd_notify(struct kspd_notifications *notify)
+{
+}
+#endif
+
+#endif
diff --git a/include/asm-mips/mach-generic/ide.h b/include/asm-mips/mach-generic/ide.h
index 550979a9ea9d..e3315359500a 100644
--- a/include/asm-mips/mach-generic/ide.h
+++ b/include/asm-mips/mach-generic/ide.h
@@ -104,65 +104,107 @@ static __inline__ unsigned long ide_default_io_base(int index)
 #endif
 
 /* MIPS port and memory-mapped I/O string operations.  */
+static inline void __ide_flush_prologue(void)
+{
+#ifdef CONFIG_SMP
+	if (cpu_has_dc_aliases)
+		preempt_disable();
+#endif
+}
+
+static inline void __ide_flush_epilogue(void)
+{
+#ifdef CONFIG_SMP
+	if (cpu_has_dc_aliases)
+		preempt_enable();
+#endif
+}
 
 static inline void __ide_flush_dcache_range(unsigned long addr, unsigned long size)
 {
 	if (cpu_has_dc_aliases) {
 		unsigned long end = addr + size;
-		for (; addr < end; addr += PAGE_SIZE)
-			flush_dcache_page(virt_to_page(addr));
+
+		while (addr < end) {
+			local_flush_data_cache_page((void *)addr);
+			addr += PAGE_SIZE;
+		}
 	}
 }
 
+/*
+ * insw() and gang might be called with interrupts disabled, so we can't
+ * send IPIs for flushing due to the potencial of deadlocks, see the comment
+ * above smp_call_function() in arch/mips/kernel/smp.c.  We work around the
+ * problem by disabling preemption so we know we actually perform the flush
+ * on the processor that actually has the lines to be flushed which hopefully
+ * is even better for performance anyway.
+ */
 static inline void __ide_insw(unsigned long port, void *addr,
 	unsigned int count)
 {
+	__ide_flush_prologue();
 	insw(port, addr, count);
 	__ide_flush_dcache_range((unsigned long)addr, count * 2);
+	__ide_flush_epilogue();
 }
 
 static inline void __ide_insl(unsigned long port, void *addr, unsigned int count)
 {
+	__ide_flush_prologue();
 	insl(port, addr, count);
 	__ide_flush_dcache_range((unsigned long)addr, count * 4);
+	__ide_flush_epilogue();
 }
 
 static inline void __ide_outsw(unsigned long port, const void *addr,
 	unsigned long count)
 {
+	__ide_flush_prologue();
 	outsw(port, addr, count);
 	__ide_flush_dcache_range((unsigned long)addr, count * 2);
+	__ide_flush_epilogue();
 }
 
 static inline void __ide_outsl(unsigned long port, const void *addr,
 	unsigned long count)
 {
+	__ide_flush_prologue();
 	outsl(port, addr, count);
 	__ide_flush_dcache_range((unsigned long)addr, count * 4);
+	__ide_flush_epilogue();
 }
 
 static inline void __ide_mm_insw(void __iomem *port, void *addr, u32 count)
 {
+	__ide_flush_prologue();
 	readsw(port, addr, count);
 	__ide_flush_dcache_range((unsigned long)addr, count * 2);
+	__ide_flush_epilogue();
 }
 
 static inline void __ide_mm_insl(void __iomem *port, void *addr, u32 count)
 {
+	__ide_flush_prologue();
 	readsl(port, addr, count);
 	__ide_flush_dcache_range((unsigned long)addr, count * 4);
+	__ide_flush_epilogue();
 }
 
 static inline void __ide_mm_outsw(void __iomem *port, void *addr, u32 count)
 {
+	__ide_flush_prologue();
 	writesw(port, addr, count);
 	__ide_flush_dcache_range((unsigned long)addr, count * 2);
+	__ide_flush_epilogue();
 }
 
 static inline void __ide_mm_outsl(void __iomem * port, void *addr, u32 count)
 {
+	__ide_flush_prologue();
 	writesl(port, addr, count);
 	__ide_flush_dcache_range((unsigned long)addr, count * 4);
+	__ide_flush_epilogue();
 }
 
 /* ide_insw calls insw, not __ide_insw.  Why? */
diff --git a/include/asm-mips/mach-jmr3927/ds1742.h b/include/asm-mips/mach-jmr3927/ds1742.h
index cff6192d4bdb..8a8fef6d07fa 100644
--- a/include/asm-mips/mach-jmr3927/ds1742.h
+++ b/include/asm-mips/mach-jmr3927/ds1742.h
@@ -3,14 +3,14 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  *
- * Copyright (C) 2003 by Ralf Baechle
+ * Copyright (C) 2003, 06 by Ralf Baechle
  */
 #ifndef __ASM_MACH_JMR3927_DS1742_H
 #define __ASM_MACH_JMR3927_DS1742_H
 
 #include <asm/jmr3927/jmr3927.h>
 
-#define rtc_read(reg)		(jmr3927_nvram_in(addr))
+#define rtc_read(reg)		(jmr3927_nvram_in(reg))
 #define rtc_write(data, reg)	(jmr3927_nvram_out((data),(reg)))
 
 #endif /* __ASM_MACH_JMR3927_DS1742_H */
diff --git a/include/asm-mips/mach-mips/param.h b/include/asm-mips/mach-mips/param.h
new file mode 100644
index 000000000000..805ef6d27d3c
--- /dev/null
+++ b/include/asm-mips/mach-mips/param.h
@@ -0,0 +1,13 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003 by Ralf Baechle
+ */
+#ifndef __ASM_MACH_MIPS_PARAM_H
+#define __ASM_MACH_MIPS_PARAM_H
+
+#define HZ		100		/* Internal kernel timer frequency */
+
+#endif /* __ASM_MACH_MIPS_PARAM_H */
diff --git a/include/asm-mips/marvell.h b/include/asm-mips/marvell.h
index 9225b3397a4f..6bb2125bb053 100644
--- a/include/asm-mips/marvell.h
+++ b/include/asm-mips/marvell.h
@@ -53,4 +53,6 @@ struct mv_pci_controller {
 	unsigned long   config_vreg;
 };
 
+extern void ll_mv64340_irq(struct pt_regs *regs);
+
 #endif	/* __ASM_MIPS_MARVELL_H */
diff --git a/include/asm-mips/mips-boards/atlas.h b/include/asm-mips/mips-boards/atlas.h
index 0998151fb3a1..a8ae12d120ee 100644
--- a/include/asm-mips/mips-boards/atlas.h
+++ b/include/asm-mips/mips-boards/atlas.h
@@ -33,13 +33,29 @@
 #define ATLAS_RTC_ADR_REG       0x1f000800
 #define ATLAS_RTC_DAT_REG       0x1f000808
 
-
 /*
  * Atlas interrupt controller register base.
  */
 #define ATLAS_ICTRL_REGS_BASE   0x1f000000
 
 /*
+ * Atlas registers are memory mapped on 64-bit aligned boundaries and
+ * only word access are allowed.
+ */
+struct atlas_ictrl_regs {
+	volatile unsigned int intraw;
+	int dummy1;
+	volatile unsigned int intseten;
+	int dummy2;
+	volatile unsigned int intrsten;
+	int dummy3;
+	volatile unsigned int intenable;
+	int dummy4;
+	volatile unsigned int intstatus;
+	int dummy5;
+};
+
+/*
  * Atlas UART register base.
  */
 #define ATLAS_UART_REGS_BASE    0x1f000900
diff --git a/include/asm-mips/mips-boards/atlasint.h b/include/asm-mips/mips-boards/atlasint.h
index bba35c183d08..fd7ebc54fa90 100644
--- a/include/asm-mips/mips-boards/atlasint.h
+++ b/include/asm-mips/mips-boards/atlasint.h
@@ -62,23 +62,4 @@
 #define ATLASINT_RES31		(ATLASINT_BASE+31)
 #define ATLASINT_END		(ATLASINT_BASE+31)
 
-/*
- * Atlas registers are memory mapped on 64-bit aligned boundaries and
- * only word access are allowed.
- */
-struct atlas_ictrl_regs {
-        volatile unsigned int intraw;
-        int dummy1;
-        volatile unsigned int intseten;
-        int dummy2;
-        volatile unsigned int intrsten;
-        int dummy3;
-        volatile unsigned int intenable;
-        int dummy4;
-        volatile unsigned int intstatus;
-        int dummy5;
-};
-
-extern void atlasint_init(void);
-
 #endif /* !(_MIPS_ATLASINT_H) */
diff --git a/include/asm-mips/mips-boards/generic.h b/include/asm-mips/mips-boards/generic.h
index 25b6ffc26623..fa8b913cc3e0 100644
--- a/include/asm-mips/mips-boards/generic.h
+++ b/include/asm-mips/mips-boards/generic.h
@@ -67,6 +67,7 @@
 #define MIPS_REVISION_CORID_CORE_FPGA2     7
 #define MIPS_REVISION_CORID_CORE_FPGAR2    8
 #define MIPS_REVISION_CORID_CORE_FPGA3     9
+#define MIPS_REVISION_CORID_CORE_24K       10
 
 /**** Artificial corid defines ****/
 /*
diff --git a/include/asm-mips/mips_mt.h b/include/asm-mips/mips_mt.h
new file mode 100644
index 000000000000..c31a312b9783
--- /dev/null
+++ b/include/asm-mips/mips_mt.h
@@ -0,0 +1,15 @@
+/*
+ * Definitions and decalrations for MIPS MT support
+ * that are common between SMTC, VSMP, and/or AP/SP
+ * kernel models.
+ */
+#ifndef __ASM_MIPS_MT_H
+#define __ASM_MIPS_MT_H
+
+extern cpumask_t mt_fpu_cpumask;
+extern unsigned long mt_fpemul_threshold;
+
+extern void mips_mt_regdump(unsigned long previous_mvpcontrol_value);
+extern void mips_mt_set_cpuoptions(void);
+
+#endif /* __ASM_MIPS_MT_H */
diff --git a/include/asm-mips/mipsmtregs.h b/include/asm-mips/mipsmtregs.h
index a669c0702c66..f637ce70758f 100644
--- a/include/asm-mips/mipsmtregs.h
+++ b/include/asm-mips/mipsmtregs.h
@@ -165,7 +165,7 @@
 
 #ifndef __ASSEMBLY__
 
-extern void mips_mt_regdump(void);
+extern void mips_mt_regdump(unsigned long previous_mvpcontrol_value);
 
 static inline unsigned int dvpe(void)
 {
@@ -234,7 +234,7 @@ static inline void __raw_emt(void)
 	__asm__ __volatile__(
 	"	.set	noreorder					\n"
 	"	.set	mips32r2					\n"
-	"	emt							\n"
+	"	.word	0x41600be1			# emt		\n"
 	"	ehb							\n"
 	"	.set	mips0						\n"
 	"	.set	reorder");
@@ -282,8 +282,11 @@ static inline void ehb(void)
 									\
 	__asm__ __volatile__(						\
 	"	.set	push					\n"	\
+	"	.set	noat					\n"	\
 	"	.set	mips32r2				\n"	\
-	"	mftgpr	%0," #rt "				\n"	\
+	"	# mftgpr $1," #rt "				\n"	\
+	"	.word	0x41000820 | (" #rt " << 16)		\n"	\
+	"	move	%0, $1					\n"	\
 	"	.set	pop					\n"	\
 	: "=r" (__res));						\
 									\
@@ -295,9 +298,7 @@ static inline void ehb(void)
 	unsigned long __res;						\
 									\
 	__asm__ __volatile__(						\
-	".set noat\n\t"							\
-	"mftr\t%0, " #rt ", " #u ", " #sel "\n\t"			\
-	".set at\n\t"							\
+	"	mftr	%0, " #rt ", " #u ", " #sel "		\n"	\
 	: "=r" (__res));						\
 									\
 	__res;								\
@@ -364,6 +365,9 @@ do {									\
 #define read_vpe_c0_ebase()		mftc0(15,1)
 #define write_vpe_c0_ebase(val)		mttc0(15, 1, val)
 #define write_vpe_c0_compare(val)	mttc0(11, 0, val)
+#define read_vpe_c0_badvaddr()		mftc0(8, 0)
+#define read_vpe_c0_epc()		mftc0(14, 0)
+#define write_vpe_c0_epc(val)		mttc0(14, 0, val)
 
 
 /* TC */
diff --git a/include/asm-mips/mipsregs.h b/include/asm-mips/mipsregs.h
index 035ba0a9b0df..5af7517fce8a 100644
--- a/include/asm-mips/mipsregs.h
+++ b/include/asm-mips/mipsregs.h
@@ -291,7 +291,7 @@
 #define ST0_DL			(_ULCAST_(1) << 24)
 
 /*
- * Enable the MIPS DSP ASE
+ * Enable the MIPS MDMX and DSP ASEs
  */
 #define ST0_MX			0x01000000
 
@@ -836,6 +836,9 @@ do {									\
 #define read_c0_cache()		__read_32bit_c0_register($7, 0)	/* TX39xx */
 #define write_c0_cache(val)	__write_32bit_c0_register($7, 0, val)
 
+#define read_c0_badvaddr()	__read_ulong_c0_register($8, 0)
+#define write_c0_badvaddr(val)	__write_ulong_c0_register($8, 0, val)
+
 #define read_c0_count()		__read_32bit_c0_register($9, 0)
 #define write_c0_count(val)	__write_32bit_c0_register($9, 0, val)
 
@@ -858,7 +861,19 @@ do {									\
 #define write_c0_compare3(val)	__write_32bit_c0_register($11, 7, val)
 
 #define read_c0_status()	__read_32bit_c0_register($12, 0)
+#ifdef CONFIG_MIPS_MT_SMTC
+#define write_c0_status(val)						\
+do {									\
+	__write_32bit_c0_register($12, 0, val);				\
+	__ehb();							\
+} while (0)
+#else
+/*
+ * Legacy non-SMTC code, which may be hazardous
+ * but which might not support EHB
+ */
 #define write_c0_status(val)	__write_32bit_c0_register($12, 0, val)
+#endif /* CONFIG_MIPS_MT_SMTC */
 
 #define read_c0_cause()		__read_32bit_c0_register($13, 0)
 #define write_c0_cause(val)	__write_32bit_c0_register($13, 0, val)
@@ -1001,6 +1016,9 @@ do {									\
 #define read_c0_taglo()		__read_32bit_c0_register($28, 0)
 #define write_c0_taglo(val)	__write_32bit_c0_register($28, 0, val)
 
+#define read_c0_dtaglo()	__read_32bit_c0_register($28, 2)
+#define write_c0_dtaglo(val)	__write_32bit_c0_register($28, 2, val)
+
 #define read_c0_taghi()		__read_32bit_c0_register($29, 0)
 #define write_c0_taghi(val)	__write_32bit_c0_register($29, 0, val)
 
@@ -1354,15 +1372,119 @@ static inline void tlb_write_random(void)
 /*
  * Manipulate bits in a c0 register.
  */
+#ifndef CONFIG_MIPS_MT_SMTC
+/*
+ * SMTC Linux requires shutting-down microthread scheduling
+ * during CP0 register read-modify-write sequences.
+ */
+#define __BUILD_SET_C0(name)					\
+static inline unsigned int					\
+set_c0_##name(unsigned int set)					\
+{								\
+	unsigned int res;					\
+								\
+	res = read_c0_##name();					\
+	res |= set;						\
+	write_c0_##name(res);					\
+								\
+	return res;						\
+}								\
+								\
+static inline unsigned int					\
+clear_c0_##name(unsigned int clear)				\
+{								\
+	unsigned int res;					\
+								\
+	res = read_c0_##name();					\
+	res &= ~clear;						\
+	write_c0_##name(res);					\
+								\
+	return res;						\
+}								\
+								\
+static inline unsigned int					\
+change_c0_##name(unsigned int change, unsigned int new)		\
+{								\
+	unsigned int res;					\
+								\
+	res = read_c0_##name();					\
+	res &= ~change;						\
+	res |= (new & change);					\
+	write_c0_##name(res);					\
+								\
+	return res;						\
+}
+
+#else /* SMTC versions that manage MT scheduling */
+
+#include <asm/interrupt.h>
+
+/*
+ * This is a duplicate of dmt() in mipsmtregs.h to avoid problems with
+ * header file recursion.
+ */
+static inline unsigned int __dmt(void)
+{
+	int res;
+
+	__asm__ __volatile__(
+	"	.set	push						\n"
+	"	.set	mips32r2					\n"
+	"	.set	noat						\n"
+	"	.word	0x41610BC1			# dmt $1	\n"
+	"	ehb							\n"
+	"	move	%0, $1						\n"
+	"	.set	pop						\n"
+	: "=r" (res));
+
+	instruction_hazard();
+
+	return res;
+}
+
+#define __VPECONTROL_TE_SHIFT	15
+#define __VPECONTROL_TE		(1UL << __VPECONTROL_TE_SHIFT)
+
+#define __EMT_ENABLE		__VPECONTROL_TE
+
+static inline void __emt(unsigned int previous)
+{
+	if ((previous & __EMT_ENABLE))
+		__asm__ __volatile__(
+		"	.set	noreorder				\n"
+		"	.set	mips32r2				\n"
+		"	.word	0x41600be1		# emt		\n"
+		"	ehb						\n"
+		"	.set	mips0					\n"
+		"	.set	reorder					\n");
+}
+
+static inline void __ehb(void)
+{
+	__asm__ __volatile__(
+	"	ehb							\n");
+}
+
+/*
+ * Note that local_irq_save/restore affect TC-specific IXMT state,
+ * not Status.IE as in non-SMTC kernel.
+ */
+
 #define __BUILD_SET_C0(name)					\
 static inline unsigned int					\
 set_c0_##name(unsigned int set)					\
 {								\
 	unsigned int res;					\
+	unsigned int omt;					\
+	unsigned int flags;					\
 								\
+	local_irq_save(flags);					\
+	omt = __dmt();						\
 	res = read_c0_##name();					\
 	res |= set;						\
 	write_c0_##name(res);					\
+	__emt(omt);						\
+	local_irq_restore(flags);				\
 								\
 	return res;						\
 }								\
@@ -1371,10 +1493,16 @@ static inline unsigned int					\
 clear_c0_##name(unsigned int clear)				\
 {								\
 	unsigned int res;					\
+	unsigned int omt;					\
+	unsigned int flags;					\
 								\
+	local_irq_save(flags);					\
+	omt = __dmt();						\
 	res = read_c0_##name();					\
 	res &= ~clear;						\
 	write_c0_##name(res);					\
+	__emt(omt);						\
+	local_irq_restore(flags);				\
 								\
 	return res;						\
 }								\
@@ -1383,14 +1511,22 @@ static inline unsigned int					\
 change_c0_##name(unsigned int change, unsigned int new)		\
 {								\
 	unsigned int res;					\
+	unsigned int omt;					\
+	unsigned int flags;					\
 								\
+	local_irq_save(flags);					\
+								\
+	omt = __dmt();						\
 	res = read_c0_##name();					\
 	res &= ~change;						\
 	res |= (new & change);					\
 	write_c0_##name(res);					\
+	__emt(omt);						\
+	local_irq_restore(flags);				\
 								\
 	return res;						\
 }
+#endif
 
 __BUILD_SET_C0(status)
 __BUILD_SET_C0(cause)
diff --git a/include/asm-mips/mmu_context.h b/include/asm-mips/mmu_context.h
index 61cf22588137..6e09f4c87211 100644
--- a/include/asm-mips/mmu_context.h
+++ b/include/asm-mips/mmu_context.h
@@ -17,6 +17,10 @@
 #include <linux/slab.h>
 #include <asm/cacheflush.h>
 #include <asm/tlbflush.h>
+#ifdef CONFIG_MIPS_MT_SMTC
+#include <asm/mipsmtregs.h>
+#include <asm/smtc.h>
+#endif /* SMTC */
 
 /*
  * For the fast tlb miss handlers, we keep a per cpu array of pointers
@@ -54,6 +58,14 @@ extern unsigned long pgd_current[];
 #define ASID_INC	0x1
 #define ASID_MASK	0xfff
 
+/* SMTC/34K debug hack - but maybe we'll keep it */
+#elif defined(CONFIG_MIPS_MT_SMTC)
+
+#define ASID_INC	0x1
+extern unsigned long smtc_asid_mask;
+#define ASID_MASK	(smtc_asid_mask)
+#define	HW_ASID_MASK	0xff
+/* End SMTC/34K debug hack */
 #else /* FIXME: not correct for R6000 */
 
 #define ASID_INC	0x1
@@ -76,6 +88,8 @@ static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
 #define ASID_VERSION_MASK  ((unsigned long)~(ASID_MASK|(ASID_MASK-1)))
 #define ASID_FIRST_VERSION ((unsigned long)(~ASID_VERSION_MASK) + 1)
 
+#ifndef CONFIG_MIPS_MT_SMTC
+/* Normal, classic MIPS get_new_mmu_context */
 static inline void
 get_new_mmu_context(struct mm_struct *mm, unsigned long cpu)
 {
@@ -91,6 +105,12 @@ get_new_mmu_context(struct mm_struct *mm, unsigned long cpu)
 	cpu_context(cpu, mm) = asid_cache(cpu) = asid;
 }
 
+#else /* CONFIG_MIPS_MT_SMTC */
+
+#define get_new_mmu_context(mm,cpu) smtc_get_new_mmu_context((mm),(cpu))
+
+#endif /* CONFIG_MIPS_MT_SMTC */
+
 /*
  * Initialize the context related info for a new mm_struct
  * instance.
@@ -111,14 +131,46 @@ static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
 {
 	unsigned int cpu = smp_processor_id();
 	unsigned long flags;
-
+#ifdef CONFIG_MIPS_MT_SMTC
+	unsigned long oldasid;
+	unsigned long mtflags;
+	int mytlb = (smtc_status & SMTC_TLB_SHARED) ? 0 : cpu_data[cpu].vpe_id;
 	local_irq_save(flags);
+	mtflags = dvpe();
+#else /* Not SMTC */
+	local_irq_save(flags);
+#endif /* CONFIG_MIPS_MT_SMTC */
 
 	/* Check if our ASID is of an older version and thus invalid */
 	if ((cpu_context(cpu, next) ^ asid_cache(cpu)) & ASID_VERSION_MASK)
 		get_new_mmu_context(next, cpu);
-
+#ifdef CONFIG_MIPS_MT_SMTC
+	/*
+	 * If the EntryHi ASID being replaced happens to be
+	 * the value flagged at ASID recycling time as having
+	 * an extended life, clear the bit showing it being
+	 * in use by this "CPU", and if that's the last bit,
+	 * free up the ASID value for use and flush any old
+	 * instances of it from the TLB.
+	 */
+	oldasid = (read_c0_entryhi() & ASID_MASK);
+	if(smtc_live_asid[mytlb][oldasid]) {
+		smtc_live_asid[mytlb][oldasid] &= ~(0x1 << cpu);
+		if(smtc_live_asid[mytlb][oldasid] == 0)
+			smtc_flush_tlb_asid(oldasid);
+	}
+	/*
+	 * Tread softly on EntryHi, and so long as we support
+	 * having ASID_MASK smaller than the hardware maximum,
+	 * make sure no "soft" bits become "hard"...
+	 */
+	write_c0_entryhi((read_c0_entryhi() & ~HW_ASID_MASK)
+			| (cpu_context(cpu, next) & ASID_MASK));
+	ehb(); /* Make sure it propagates to TCStatus */
+	evpe(mtflags);
+#else
 	write_c0_entryhi(cpu_context(cpu, next));
+#endif /* CONFIG_MIPS_MT_SMTC */
 	TLBMISS_HANDLER_SETUP_PGD(next->pgd);
 
 	/*
@@ -151,12 +203,34 @@ activate_mm(struct mm_struct *prev, struct mm_struct *next)
 	unsigned long flags;
 	unsigned int cpu = smp_processor_id();
 
+#ifdef CONFIG_MIPS_MT_SMTC
+	unsigned long oldasid;
+	unsigned long mtflags;
+	int mytlb = (smtc_status & SMTC_TLB_SHARED) ? 0 : cpu_data[cpu].vpe_id;
+#endif /* CONFIG_MIPS_MT_SMTC */
+
 	local_irq_save(flags);
 
 	/* Unconditionally get a new ASID.  */
 	get_new_mmu_context(next, cpu);
 
+#ifdef CONFIG_MIPS_MT_SMTC
+	/* See comments for similar code above */
+	mtflags = dvpe();
+	oldasid = read_c0_entryhi() & ASID_MASK;
+	if(smtc_live_asid[mytlb][oldasid]) {
+		smtc_live_asid[mytlb][oldasid] &= ~(0x1 << cpu);
+       		if(smtc_live_asid[mytlb][oldasid] == 0)
+               		 smtc_flush_tlb_asid(oldasid);
+	}
+	/* See comments for similar code above */
+	write_c0_entryhi((read_c0_entryhi() & ~HW_ASID_MASK) |
+	                 (cpu_context(cpu, next) & ASID_MASK));
+	ehb(); /* Make sure it propagates to TCStatus */
+	evpe(mtflags);
+#else
 	write_c0_entryhi(cpu_context(cpu, next));
+#endif /* CONFIG_MIPS_MT_SMTC */
 	TLBMISS_HANDLER_SETUP_PGD(next->pgd);
 
 	/* mark mmu ownership change */
@@ -174,17 +248,49 @@ static inline void
 drop_mmu_context(struct mm_struct *mm, unsigned cpu)
 {
 	unsigned long flags;
+#ifdef CONFIG_MIPS_MT_SMTC
+	unsigned long oldasid;
+	/* Can't use spinlock because called from TLB flush within DVPE */
+	unsigned int prevvpe;
+	int mytlb = (smtc_status & SMTC_TLB_SHARED) ? 0 : cpu_data[cpu].vpe_id;
+#endif /* CONFIG_MIPS_MT_SMTC */
 
 	local_irq_save(flags);
 
 	if (cpu_isset(cpu, mm->cpu_vm_mask))  {
 		get_new_mmu_context(mm, cpu);
+#ifdef CONFIG_MIPS_MT_SMTC
+		/* See comments for similar code above */
+		prevvpe = dvpe();
+		oldasid = (read_c0_entryhi() & ASID_MASK);
+		if(smtc_live_asid[mytlb][oldasid]) {
+		  smtc_live_asid[mytlb][oldasid] &= ~(0x1 << cpu);
+		  if(smtc_live_asid[mytlb][oldasid] == 0)
+			smtc_flush_tlb_asid(oldasid);
+		}
+		/* See comments for similar code above */
+		write_c0_entryhi((read_c0_entryhi() & ~HW_ASID_MASK)
+				| cpu_asid(cpu, mm));
+		ehb(); /* Make sure it propagates to TCStatus */
+		evpe(prevvpe);
+#else /* not CONFIG_MIPS_MT_SMTC */
 		write_c0_entryhi(cpu_asid(cpu, mm));
+#endif /* CONFIG_MIPS_MT_SMTC */
 	} else {
 		/* will get a new context next time */
+#ifndef CONFIG_MIPS_MT_SMTC
 		cpu_context(cpu, mm) = 0;
+#else /* SMTC */
+		int i;
+
+		/* SMTC shares the TLB (and ASIDs) across VPEs */
+		for (i = 0; i < num_online_cpus(); i++) {
+	    	    if((smtc_status & SMTC_TLB_SHARED)
+	    	    || (cpu_data[i].vpe_id == cpu_data[cpu].vpe_id))
+			cpu_context(i, mm) = 0;
+		}
+#endif /* CONFIG_MIPS_MT_SMTC */
 	}
-
 	local_irq_restore(flags);
 }
 
diff --git a/include/asm-mips/page.h b/include/asm-mips/page.h
index a1eab136ff6c..4035ec79ecd4 100644
--- a/include/asm-mips/page.h
+++ b/include/asm-mips/page.h
@@ -139,9 +139,11 @@ typedef struct { unsigned long pgprot; } pgprot_t;
 
 #define pfn_to_kaddr(pfn)	__va((pfn) << PAGE_SHIFT)
 
+#ifndef CONFIG_SPARSEMEM
 #ifndef CONFIG_NEED_MULTIPLE_NODES
 #define pfn_valid(pfn)		((pfn) < max_mapnr)
 #endif
+#endif
 
 #define virt_to_page(kaddr)	pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
 #define virt_addr_valid(kaddr)	pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
diff --git a/include/asm-mips/pgtable-32.h b/include/asm-mips/pgtable-32.h
index 4d6bc45df594..087c20769256 100644
--- a/include/asm-mips/pgtable-32.h
+++ b/include/asm-mips/pgtable-32.h
@@ -177,48 +177,67 @@ pfn_pte(unsigned long pfn, pgprot_t prot)
 	((swp_entry_t) { ((type) << 10) | ((offset) << 15) })
 
 /*
- * Bits 0, 1, 2, 9 and 10 are taken, split up the 27 bits of offset
- * into this range:
+ * Bits 0, 4, 8, and 9 are taken, split up 28 bits of offset into this range:
  */
-#define PTE_FILE_MAX_BITS	27
+#define PTE_FILE_MAX_BITS	28
 
-#define pte_to_pgoff(_pte) \
-	((((_pte).pte >> 3) & 0x3f ) + (((_pte).pte >> 11) << 8 ))
+#define pte_to_pgoff(_pte)	((((_pte).pte >> 1 ) & 0x07) | \
+				 (((_pte).pte >> 2 ) & 0x38) | \
+				 (((_pte).pte >> 10) <<  6 ))
 
-#define pgoff_to_pte(off) \
-	((pte_t) { (((off) & 0x3f) << 3) + (((off) >> 8) << 11) + _PAGE_FILE })
+#define pgoff_to_pte(off)	((pte_t) { (((off) & 0x07) << 1 ) | \
+					   (((off) & 0x38) << 2 ) | \
+					   (((off) >>  6 ) << 10) | \
+					   _PAGE_FILE })
 
 #else
 
 /* Swap entries must have VALID and GLOBAL bits cleared. */
+#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32)
+#define __swp_type(x)		(((x).val >> 2) & 0x1f)
+#define __swp_offset(x) 	 ((x).val >> 7)
+#define __swp_entry(type,offset)	\
+		((swp_entry_t)  { ((type) << 2) | ((offset) << 7) })
+#else
 #define __swp_type(x)		(((x).val >> 8) & 0x1f)
-#define __swp_offset(x)		((x).val >> 13)
+#define __swp_offset(x) 	 ((x).val >> 13)
 #define __swp_entry(type,offset)	\
-		((swp_entry_t) { ((type) << 8) | ((offset) << 13) })
+		((swp_entry_t)  { ((type) << 8) | ((offset) << 13) })
+#endif /* defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32) */
 
+#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32)
 /*
- * Bits 0, 1, 2, 7 and 8 are taken, split up the 27 bits of offset
- * into this range:
+ * Bits 0 and 1 of pte_high are taken, use the rest for the page offset...
  */
-#define PTE_FILE_MAX_BITS	27
+#define PTE_FILE_MAX_BITS	30
 
-#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32_R1)
-	/* fixme */
-#define pte_to_pgoff(_pte) (((_pte).pte_high >> 6) + ((_pte).pte_high & 0x3f))
-#define pgoff_to_pte(off) \
-	((pte_t){(((off) & 0x3f) + ((off) << 6) + _PAGE_FILE)})
+#define pte_to_pgoff(_pte)	((_pte).pte_high >> 2)
+#define pgoff_to_pte(off) 	((pte_t) { _PAGE_FILE, (off) << 2 })
 
 #else
-#define pte_to_pgoff(_pte) \
-	((((_pte).pte >> 3) & 0x1f ) + (((_pte).pte >> 9) << 6 ))
+/*
+ * Bits 0, 4, 6, and 7 are taken, split up 28 bits of offset into this range:
+ */
+#define PTE_FILE_MAX_BITS	28
+
+#define pte_to_pgoff(_pte)	((((_pte).pte >> 1) & 0x7) | \
+				 (((_pte).pte >> 2) & 0x8) | \
+				 (((_pte).pte >> 8) <<  4))
 
-#define pgoff_to_pte(off) \
-	((pte_t) { (((off) & 0x1f) << 3) + (((off) >> 6) << 9) + _PAGE_FILE })
+#define pgoff_to_pte(off)	((pte_t) { (((off) & 0x7) << 1) | \
+					   (((off) & 0x8) << 2) | \
+					   (((off) >>  4) << 8) | \
+					   _PAGE_FILE })
 #endif
 
 #endif
 
+#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32)
+#define __pte_to_swp_entry(pte) ((swp_entry_t) { (pte).pte_high })
+#define __swp_entry_to_pte(x)	((pte_t) { 0, (x).val })
+#else
 #define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
 #define __swp_entry_to_pte(x)	((pte_t) { (x).val })
+#endif
 
 #endif /* _ASM_PGTABLE_32_H */
diff --git a/include/asm-mips/pgtable-64.h b/include/asm-mips/pgtable-64.h
index 82166b254b27..2faf5c9ff127 100644
--- a/include/asm-mips/pgtable-64.h
+++ b/include/asm-mips/pgtable-64.h
@@ -224,15 +224,12 @@ static inline pte_t mk_swap_pte(unsigned long type, unsigned long offset)
 #define __swp_entry_to_pte(x)	((pte_t) { (x).val })
 
 /*
- * Bits 0, 1, 2, 7 and 8 are taken, split up the 32 bits of offset
- * into this range:
+ * Bits 0, 4, 6, and 7 are taken. Let's leave bits 1, 2, 3, and 5 alone to
+ * make things easier, and only use the upper 56 bits for the page offset...
  */
-#define PTE_FILE_MAX_BITS	32
+#define PTE_FILE_MAX_BITS	56
 
-#define pte_to_pgoff(_pte) \
-	((((_pte).pte >> 3) & 0x1f ) + (((_pte).pte >> 9) << 6 ))
-
-#define pgoff_to_pte(off) \
-	((pte_t) { (((off) & 0x1f) << 3) + (((off) >> 6) << 9) + _PAGE_FILE })
+#define pte_to_pgoff(_pte)	((_pte).pte >> 8)
+#define pgoff_to_pte(off)	((pte_t) { ((off) << 8) | _PAGE_FILE })
 
 #endif /* _ASM_PGTABLE_64_H */
diff --git a/include/asm-mips/pgtable.h b/include/asm-mips/pgtable.h
index 702a28fa7a34..d0af2a3b0152 100644
--- a/include/asm-mips/pgtable.h
+++ b/include/asm-mips/pgtable.h
@@ -70,7 +70,15 @@ extern unsigned long zero_page_mask;
 #define ZERO_PAGE(vaddr) \
 	(virt_to_page(empty_zero_page + (((unsigned long)(vaddr)) & zero_page_mask)))
 
-#define __HAVE_ARCH_MULTIPLE_ZERO_PAGE
+#define __HAVE_ARCH_MOVE_PTE
+#define move_pte(pte, prot, old_addr, new_addr)				\
+({									\
+ 	pte_t newpte = (pte);						\
+	if (pte_present(pte) && pfn_valid(pte_pfn(pte)) &&		\
+			pte_page(pte) == ZERO_PAGE(old_addr))		\
+		newpte = mk_pte(ZERO_PAGE(new_addr), (prot));		\
+	newpte;								\
+})
 
 extern void paging_init(void);
 
@@ -82,10 +90,11 @@ extern void paging_init(void);
 #define pmd_page(pmd)		(pfn_to_page(pmd_phys(pmd) >> PAGE_SHIFT))
 #define pmd_page_kernel(pmd)	pmd_val(pmd)
 
-#define pte_none(pte)		(!(pte_val(pte) & ~_PAGE_GLOBAL))
-#define pte_present(pte)	(pte_val(pte) & _PAGE_PRESENT)
-
 #if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32_R1)
+
+#define pte_none(pte)		(!(((pte).pte_low | (pte).pte_high) & ~_PAGE_GLOBAL))
+#define pte_present(pte)	((pte).pte_low & _PAGE_PRESENT)
+
 static inline void set_pte(pte_t *ptep, pte_t pte)
 {
 	ptep->pte_high = pte.pte_high;
@@ -93,27 +102,35 @@ static inline void set_pte(pte_t *ptep, pte_t pte)
 	ptep->pte_low = pte.pte_low;
 	//printk("pte_high %x pte_low %x\n", ptep->pte_high, ptep->pte_low);
 
-	if (pte_val(pte) & _PAGE_GLOBAL) {
+	if (pte.pte_low & _PAGE_GLOBAL) {
 		pte_t *buddy = ptep_buddy(ptep);
 		/*
 		 * Make sure the buddy is global too (if it's !none,
 		 * it better already be global)
 		 */
-		if (pte_none(*buddy))
-			buddy->pte_low |= _PAGE_GLOBAL;
+		if (pte_none(*buddy)) {
+			buddy->pte_low  |= _PAGE_GLOBAL;
+			buddy->pte_high |= _PAGE_GLOBAL;
+		}
 	}
 }
 #define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval)
 
 static inline void pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
 {
+	pte_t null = __pte(0);
+
 	/* Preserve global status for the pair */
-	if (pte_val(*ptep_buddy(ptep)) & _PAGE_GLOBAL)
-		set_pte_at(mm, addr, ptep, __pte(_PAGE_GLOBAL));
-	else
-		set_pte_at(mm, addr, ptep, __pte(0));
+	if (ptep_buddy(ptep)->pte_low & _PAGE_GLOBAL)
+		null.pte_low = null.pte_high = _PAGE_GLOBAL;
+
+	set_pte_at(mm, addr, ptep, null);
 }
 #else
+
+#define pte_none(pte)		(!(pte_val(pte) & ~_PAGE_GLOBAL))
+#define pte_present(pte)	(pte_val(pte) & _PAGE_PRESENT)
+
 /*
  * Certain architectures need to do special things when pte's
  * within a page table are directly modified.  Thus, the following
@@ -174,75 +191,76 @@ extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
  */
 static inline int pte_user(pte_t pte)	{ BUG(); return 0; }
 #if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32_R1)
-static inline int pte_read(pte_t pte)	{ return (pte).pte_low & _PAGE_READ; }
-static inline int pte_write(pte_t pte)	{ return (pte).pte_low & _PAGE_WRITE; }
-static inline int pte_dirty(pte_t pte)	{ return (pte).pte_low & _PAGE_MODIFIED; }
-static inline int pte_young(pte_t pte)	{ return (pte).pte_low & _PAGE_ACCESSED; }
-static inline int pte_file(pte_t pte)	{ return (pte).pte_low & _PAGE_FILE; }
+static inline int pte_read(pte_t pte)	{ return pte.pte_low & _PAGE_READ; }
+static inline int pte_write(pte_t pte)	{ return pte.pte_low & _PAGE_WRITE; }
+static inline int pte_dirty(pte_t pte)	{ return pte.pte_low & _PAGE_MODIFIED; }
+static inline int pte_young(pte_t pte)	{ return pte.pte_low & _PAGE_ACCESSED; }
+static inline int pte_file(pte_t pte)	{ return pte.pte_low & _PAGE_FILE; }
+
 static inline pte_t pte_wrprotect(pte_t pte)
 {
-	(pte).pte_low &= ~(_PAGE_WRITE | _PAGE_SILENT_WRITE);
-	(pte).pte_high &= ~_PAGE_SILENT_WRITE;
+	pte.pte_low  &= ~(_PAGE_WRITE | _PAGE_SILENT_WRITE);
+	pte.pte_high &= ~_PAGE_SILENT_WRITE;
 	return pte;
 }
 
 static inline pte_t pte_rdprotect(pte_t pte)
 {
-	(pte).pte_low &= ~(_PAGE_READ | _PAGE_SILENT_READ);
-	(pte).pte_high &= ~_PAGE_SILENT_READ;
+	pte.pte_low  &= ~(_PAGE_READ | _PAGE_SILENT_READ);
+	pte.pte_high &= ~_PAGE_SILENT_READ;
 	return pte;
 }
 
 static inline pte_t pte_mkclean(pte_t pte)
 {
-	(pte).pte_low &= ~(_PAGE_MODIFIED|_PAGE_SILENT_WRITE);
-	(pte).pte_high &= ~_PAGE_SILENT_WRITE;
+	pte.pte_low  &= ~(_PAGE_MODIFIED | _PAGE_SILENT_WRITE);
+	pte.pte_high &= ~_PAGE_SILENT_WRITE;
 	return pte;
 }
 
 static inline pte_t pte_mkold(pte_t pte)
 {
-	(pte).pte_low &= ~(_PAGE_ACCESSED|_PAGE_SILENT_READ);
-	(pte).pte_high &= ~_PAGE_SILENT_READ;
+	pte.pte_low  &= ~(_PAGE_ACCESSED | _PAGE_SILENT_READ);
+	pte.pte_high &= ~_PAGE_SILENT_READ;
 	return pte;
 }
 
 static inline pte_t pte_mkwrite(pte_t pte)
 {
-	(pte).pte_low |= _PAGE_WRITE;
-	if ((pte).pte_low & _PAGE_MODIFIED) {
-		(pte).pte_low |= _PAGE_SILENT_WRITE;
-		(pte).pte_high |= _PAGE_SILENT_WRITE;
+	pte.pte_low |= _PAGE_WRITE;
+	if (pte.pte_low & _PAGE_MODIFIED) {
+		pte.pte_low  |= _PAGE_SILENT_WRITE;
+		pte.pte_high |= _PAGE_SILENT_WRITE;
 	}
 	return pte;
 }
 
 static inline pte_t pte_mkread(pte_t pte)
 {
-	(pte).pte_low |= _PAGE_READ;
-	if ((pte).pte_low & _PAGE_ACCESSED) {
-		(pte).pte_low |= _PAGE_SILENT_READ;
-		(pte).pte_high |= _PAGE_SILENT_READ;
+	pte.pte_low |= _PAGE_READ;
+	if (pte.pte_low & _PAGE_ACCESSED) {
+		pte.pte_low  |= _PAGE_SILENT_READ;
+		pte.pte_high |= _PAGE_SILENT_READ;
 	}
 	return pte;
 }
 
 static inline pte_t pte_mkdirty(pte_t pte)
 {
-	(pte).pte_low |= _PAGE_MODIFIED;
-	if ((pte).pte_low & _PAGE_WRITE) {
-		(pte).pte_low |= _PAGE_SILENT_WRITE;
-		(pte).pte_high |= _PAGE_SILENT_WRITE;
+	pte.pte_low |= _PAGE_MODIFIED;
+	if (pte.pte_low & _PAGE_WRITE) {
+		pte.pte_low  |= _PAGE_SILENT_WRITE;
+		pte.pte_high |= _PAGE_SILENT_WRITE;
 	}
 	return pte;
 }
 
 static inline pte_t pte_mkyoung(pte_t pte)
 {
-	(pte).pte_low |= _PAGE_ACCESSED;
-	if ((pte).pte_low & _PAGE_READ)
-		(pte).pte_low |= _PAGE_SILENT_READ;
-		(pte).pte_high |= _PAGE_SILENT_READ;
+	pte.pte_low |= _PAGE_ACCESSED;
+	if (pte.pte_low & _PAGE_READ)
+		pte.pte_low  |= _PAGE_SILENT_READ;
+		pte.pte_high |= _PAGE_SILENT_READ;
 	return pte;
 }
 #else
@@ -335,8 +353,9 @@ static inline pgprot_t pgprot_noncached(pgprot_t _prot)
 #if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32_R1)
 static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
 {
-	pte.pte_low &= _PAGE_CHG_MASK;
-	pte.pte_low |= pgprot_val(newprot);
+	pte.pte_low  &= _PAGE_CHG_MASK;
+	pte.pte_high &= ~0x3f;
+	pte.pte_low  |= pgprot_val(newprot);
 	pte.pte_high |= pgprot_val(newprot) & 0x3f;
 	return pte;
 }
diff --git a/include/asm-mips/processor.h b/include/asm-mips/processor.h
index 39d2bd50fece..0fb75f0762e0 100644
--- a/include/asm-mips/processor.h
+++ b/include/asm-mips/processor.h
@@ -12,6 +12,7 @@
 #define _ASM_PROCESSOR_H
 
 #include <linux/config.h>
+#include <linux/cpumask.h>
 #include <linux/threads.h>
 
 #include <asm/cachectl.h>
@@ -107,6 +108,10 @@ struct mips_dsp_state {
 
 #define INIT_DSP {{0,},}
 
+#define INIT_CPUMASK { \
+	{0,} \
+}
+
 typedef struct {
 	unsigned long seg;
 } mm_segment_t;
@@ -129,6 +134,12 @@ struct thread_struct {
 
 	/* Saved fpu/fpu emulator stuff. */
 	union mips_fpu_union fpu;
+#ifdef CONFIG_MIPS_MT_FPAFF
+	/* Emulated instruction count */
+	unsigned long emulated_fp;
+	/* Saved per-thread scheduler affinity mask */
+	cpumask_t user_cpus_allowed;
+#endif /* CONFIG_MIPS_MT_FPAFF */
 
 	/* Saved state of the DSP ASE, if available. */
 	struct mips_dsp_state dsp;
@@ -142,6 +153,7 @@ struct thread_struct {
 #define MF_LOGADE	2		/* Log address errors to syslog */
 #define MF_32BIT_REGS	4		/* also implies 16/32 fprs */
 #define MF_32BIT_ADDR	8		/* 32-bit address space (o32/n32) */
+#define MF_FPUBOUND	0x10		/* thread bound to FPU-full CPU set */
 	unsigned long mflags;
 	unsigned long irix_trampoline;  /* Wheee... */
 	unsigned long irix_oldctx;
@@ -153,6 +165,12 @@ struct thread_struct {
 #define MF_N32		MF_32BIT_ADDR
 #define MF_N64		0
 
+#ifdef CONFIG_MIPS_MT_FPAFF
+#define FPAFF_INIT 0, INIT_CPUMASK,
+#else
+#define FPAFF_INIT
+#endif /* CONFIG_MIPS_MT_FPAFF */
+
 #define INIT_THREAD  { \
         /* \
          * saved main processor registers \
@@ -168,6 +186,10 @@ struct thread_struct {
 	 */ \
 	INIT_FPU, \
 	/* \
+	 * fpu affinity state (null if not FPAFF) \
+	 */ \
+	FPAFF_INIT \
+	/* \
 	 * saved dsp/dsp emulator stuff \
 	 */ \
 	INIT_DSP, \
diff --git a/include/asm-mips/ptrace.h b/include/asm-mips/ptrace.h
index 95c5839ac465..fa9d8713c12a 100644
--- a/include/asm-mips/ptrace.h
+++ b/include/asm-mips/ptrace.h
@@ -45,6 +45,10 @@ struct pt_regs {
 	unsigned long cp0_badvaddr;
 	unsigned long cp0_cause;
 	unsigned long cp0_epc;
+#ifdef CONFIG_MIPS_MT_SMTC
+	unsigned long cp0_tcstatus;
+	unsigned long smtc_pad;
+#endif /* CONFIG_MIPS_MT_SMTC */
 };
 
 /* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
diff --git a/include/asm-mips/r4kcache.h b/include/asm-mips/r4kcache.h
index 90c374700977..3c8e3c8d1a9a 100644
--- a/include/asm-mips/r4kcache.h
+++ b/include/asm-mips/r4kcache.h
@@ -15,6 +15,7 @@
 #include <asm/asm.h>
 #include <asm/cacheops.h>
 #include <asm/cpu-features.h>
+#include <asm/mipsmtregs.h>
 
 /*
  * This macro return a properly sign-extended address suitable as base address
@@ -37,16 +38,120 @@
 	"	cache	%0, %1					\n"	\
 	"	.set	pop					\n"	\
 	:								\
-	: "i" (op), "m" (*(unsigned char *)(addr)))
+	: "i" (op), "R" (*(unsigned char *)(addr)))
+
+#ifdef CONFIG_MIPS_MT
+/*
+ * Temporary hacks for SMTC debug. Optionally force single-threaded
+ * execution during I-cache flushes.
+ */
+
+#define PROTECT_CACHE_FLUSHES 1
+
+#ifdef PROTECT_CACHE_FLUSHES
+
+extern int mt_protiflush;
+extern int mt_protdflush;
+extern void mt_cflush_lockdown(void);
+extern void mt_cflush_release(void);
+
+#define BEGIN_MT_IPROT \
+	unsigned long flags = 0;			\
+	unsigned long mtflags = 0;			\
+	if(mt_protiflush) {				\
+		local_irq_save(flags);			\
+		ehb();					\
+		mtflags = dvpe();			\
+		mt_cflush_lockdown();			\
+	}
+
+#define END_MT_IPROT \
+	if(mt_protiflush) {				\
+		mt_cflush_release();			\
+		evpe(mtflags);				\
+		local_irq_restore(flags);		\
+	}
+
+#define BEGIN_MT_DPROT \
+	unsigned long flags = 0;			\
+	unsigned long mtflags = 0;			\
+	if(mt_protdflush) {				\
+		local_irq_save(flags);			\
+		ehb();					\
+		mtflags = dvpe();			\
+		mt_cflush_lockdown();			\
+	}
+
+#define END_MT_DPROT \
+	if(mt_protdflush) {				\
+		mt_cflush_release();			\
+		evpe(mtflags);				\
+		local_irq_restore(flags);		\
+	}
+
+#else
+
+#define BEGIN_MT_IPROT
+#define BEGIN_MT_DPROT
+#define END_MT_IPROT
+#define END_MT_DPROT
+
+#endif /* PROTECT_CACHE_FLUSHES */
+
+#define __iflush_prologue						\
+	unsigned long redundance;					\
+	extern int mt_n_iflushes;					\
+	BEGIN_MT_IPROT							\
+	for (redundance = 0; redundance < mt_n_iflushes; redundance++) {
+
+#define __iflush_epilogue						\
+	END_MT_IPROT							\
+	}
+
+#define __dflush_prologue						\
+	unsigned long redundance;					\
+	extern int mt_n_dflushes;					\
+	BEGIN_MT_DPROT							\
+	for (redundance = 0; redundance < mt_n_dflushes; redundance++) {
+
+#define __dflush_epilogue \
+	END_MT_DPROT	 \
+	}
+
+#define __inv_dflush_prologue __dflush_prologue
+#define __inv_dflush_epilogue __dflush_epilogue
+#define __sflush_prologue {
+#define __sflush_epilogue }
+#define __inv_sflush_prologue __sflush_prologue
+#define __inv_sflush_epilogue __sflush_epilogue
+
+#else /* CONFIG_MIPS_MT */
+
+#define __iflush_prologue {
+#define __iflush_epilogue }
+#define __dflush_prologue {
+#define __dflush_epilogue }
+#define __inv_dflush_prologue {
+#define __inv_dflush_epilogue }
+#define __sflush_prologue {
+#define __sflush_epilogue }
+#define __inv_sflush_prologue {
+#define __inv_sflush_epilogue }
+
+#endif /* CONFIG_MIPS_MT */
 
 static inline void flush_icache_line_indexed(unsigned long addr)
 {
+	__iflush_prologue
 	cache_op(Index_Invalidate_I, addr);
+	__iflush_epilogue
 }
 
 static inline void flush_dcache_line_indexed(unsigned long addr)
 {
+	__dflush_prologue
 	cache_op(Index_Writeback_Inv_D, addr);
+	__dflush_epilogue
 }
 
 static inline void flush_scache_line_indexed(unsigned long addr)
@@ -56,17 +161,23 @@ static inline void flush_scache_line_indexed(unsigned long addr)
 
 static inline void flush_icache_line(unsigned long addr)
 {
+	__iflush_prologue
 	cache_op(Hit_Invalidate_I, addr);
+	__iflush_epilogue
 }
 
 static inline void flush_dcache_line(unsigned long addr)
 {
+	__dflush_prologue
 	cache_op(Hit_Writeback_Inv_D, addr);
+	__dflush_epilogue
 }
 
 static inline void invalidate_dcache_line(unsigned long addr)
 {
+	__dflush_prologue
 	cache_op(Hit_Invalidate_D, addr);
+	__dflush_epilogue
 }
 
 static inline void invalidate_scache_line(unsigned long addr)
@@ -239,9 +350,13 @@ static inline void blast_##pfx##cache##lsize(void)			\
 	                       current_cpu_data.desc.waybit;		\
 	unsigned long ws, addr;						\
 									\
+	__##pfx##flush_prologue						\
+									\
 	for (ws = 0; ws < ws_end; ws += ws_inc)				\
 		for (addr = start; addr < end; addr += lsize * 32)	\
 			cache##lsize##_unroll32(addr|ws,indexop);	\
+									\
+	__##pfx##flush_epilogue						\
 }									\
 									\
 static inline void blast_##pfx##cache##lsize##_page(unsigned long page)	\
@@ -249,10 +364,14 @@ static inline void blast_##pfx##cache##lsize##_page(unsigned long page)	\
 	unsigned long start = page;					\
 	unsigned long end = page + PAGE_SIZE;				\
 									\
+	__##pfx##flush_prologue						\
+									\
 	do {								\
 		cache##lsize##_unroll32(start,hitop);			\
 		start += lsize * 32;					\
 	} while (start < end);						\
+									\
+	__##pfx##flush_epilogue						\
 }									\
 									\
 static inline void blast_##pfx##cache##lsize##_page_indexed(unsigned long page) \
@@ -265,9 +384,13 @@ static inline void blast_##pfx##cache##lsize##_page_indexed(unsigned long page)
 	                       current_cpu_data.desc.waybit;		\
 	unsigned long ws, addr;						\
 									\
+	__##pfx##flush_prologue						\
+									\
 	for (ws = 0; ws < ws_end; ws += ws_inc)				\
 		for (addr = start; addr < end; addr += lsize * 32)	\
 			cache##lsize##_unroll32(addr|ws,indexop);	\
+									\
+	__##pfx##flush_epilogue						\
 }
 
 __BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 16)
@@ -288,12 +411,17 @@ static inline void prot##blast_##pfx##cache##_range(unsigned long start, \
 	unsigned long lsize = cpu_##desc##_line_size();			\
 	unsigned long addr = start & ~(lsize - 1);			\
 	unsigned long aend = (end - 1) & ~(lsize - 1);			\
+									\
+	__##pfx##flush_prologue						\
+									\
 	while (1) {							\
 		prot##cache_op(hitop, addr);				\
 		if (addr == aend)					\
 			break;						\
 		addr += lsize;						\
 	}								\
+									\
+	__##pfx##flush_epilogue						\
 }
 
 __BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, protected_)
diff --git a/include/asm-mips/rtc.h b/include/asm-mips/rtc.h
index a2abc4572b63..82ad401c7dca 100644
--- a/include/asm-mips/rtc.h
+++ b/include/asm-mips/rtc.h
@@ -32,7 +32,7 @@ static inline unsigned int get_rtc_time(struct rtc_time *time)
 {
 	unsigned long nowtime;
 
-	nowtime = rtc_get_time();
+	nowtime = rtc_mips_get_time();
 	to_tm(nowtime, time);
 	time->tm_year -= 1900;
 
@@ -47,7 +47,7 @@ static inline int set_rtc_time(struct rtc_time *time)
 	nowtime = mktime(time->tm_year+1900, time->tm_mon+1,
 			time->tm_mday, time->tm_hour, time->tm_min,
 			time->tm_sec);
-	ret = rtc_set_time(nowtime);
+	ret = rtc_mips_set_time(nowtime);
 
 	return ret;
 }
diff --git a/include/asm-mips/rtlx.h b/include/asm-mips/rtlx.h
index 1298c3fdf6c9..76cd51c6be39 100644
--- a/include/asm-mips/rtlx.h
+++ b/include/asm-mips/rtlx.h
@@ -3,32 +3,46 @@
  *
  */
 
-#ifndef _RTLX_H
-#define _RTLX_H_
+#ifndef __ASM_RTLX_H
+#define __ASM_RTLX_H_
 
 #define LX_NODE_BASE 10
 
 #define MIPSCPU_INT_BASE       16
 #define MIPS_CPU_RTLX_IRQ 0
 
-#define RTLX_VERSION 1
+#define RTLX_VERSION 2
 #define RTLX_xID 0x12345600
 #define RTLX_ID (RTLX_xID | RTLX_VERSION)
 #define RTLX_CHANNELS 8
 
-#define RTLX_BUFFER_SIZE 1024
+#define RTLX_CHANNEL_STDIO	0
+#define RTLX_CHANNEL_DBG	1
+#define RTLX_CHANNEL_SYSIO	2
 
-/*
- * lx_state bits
- */
-#define RTLX_STATE_OPENED 1UL
+extern int rtlx_open(int index, int can_sleep);
+extern int rtlx_release(int index);
+extern ssize_t rtlx_read(int index, void *buff, size_t count, int user);
+extern ssize_t rtlx_write(int index, void *buffer, size_t count, int user);
+extern unsigned int rtlx_read_poll(int index, int can_sleep);
+extern unsigned int rtlx_write_poll(int index);
+
+enum rtlx_state {
+	RTLX_STATE_UNUSED,
+	RTLX_STATE_INITIALISED,
+	RTLX_STATE_REMOTE_READY,
+	RTLX_STATE_OPENED
+};
+
+#define RTLX_BUFFER_SIZE 1024
 
 /* each channel supports read and write.
    linux (vpe0) reads lx_buffer  and writes rt_buffer
    SP (vpe1) reads rt_buffer and writes lx_buffer
 */
 struct rtlx_channel {
-	unsigned long lx_state;
+	enum rtlx_state rt_state;
+	enum rtlx_state lx_state;
 
 	int buffer_size;
 
@@ -38,15 +52,13 @@ struct rtlx_channel {
 
 	int lx_write, lx_read;
 	char *lx_buffer;
-
-	void *queues;
-
 };
 
 struct rtlx_info {
 	unsigned long id;
+	enum rtlx_state state;
 
 	struct rtlx_channel channel[RTLX_CHANNELS];
 };
 
-#endif /* _RTLX_H_ */
+#endif /* __ASM_RTLX_H_ */
diff --git a/include/asm-mips/serial.h b/include/asm-mips/serial.h
index 7b2366412203..7196ceb0e948 100644
--- a/include/asm-mips/serial.h
+++ b/include/asm-mips/serial.h
@@ -77,15 +77,15 @@
 #include <asm/it8712.h>
 #define ITE_SERIAL_PORT_DEFNS                                  \
     { .baud_base = BASE_BAUD, .port = (IT8172_PCI_IO_BASE + IT_UART_BASE), \
-      .irq = IT8172_UART_IRQ, .flags = STD_COM_FLAGS, .type = 0x3 }, \
+      .irq = IT8172_UART_IRQ, .flags = STD_COM_FLAGS, .port = PORT_16550 }, \
     { .baud_base = (24000000/(16*13)), .port = (IT8172_PCI_IO_BASE + IT8712_UART1_PORT), \
-      .irq = IT8172_SERIRQ_4, .flags = STD_COM_FLAGS, .type = 0x3 }, \
+      .irq = IT8172_SERIRQ_4, .flags = STD_COM_FLAGS, .port = PORT_16550 }, \
     /* Smart Card Reader 0 */ \
     { .baud_base = BASE_BAUD, .port = (IT8172_PCI_IO_BASE + IT_SCR0_BASE), \
-      .irq = IT8172_SCR0_IRQ, .flags = STD_COM_FLAGS, .type = 0x3 }, \
+      .irq = IT8172_SCR0_IRQ, .flags = STD_COM_FLAGS, .port = PORT_16550 }, \
     /* Smart Card Reader 1 */ \
     { .baud_base = BASE_BAUD, .port = (IT8172_PCI_IO_BASE + IT_SCR1_BASE), \
-      .irq = IT8172_SCR1_IRQ, .flags = STD_COM_FLAGS, .type = 0x3 },
+      .irq = IT8172_SCR1_IRQ, .flags = STD_COM_FLAGS, .port = PORT_16550 },
 #else
 #define ITE_SERIAL_PORT_DEFNS
 #endif
@@ -95,10 +95,10 @@
 #include <asm/it8172/it8172_int.h>
 #define IVR_SERIAL_PORT_DEFNS                                  \
     { .baud_base = BASE_BAUD, .port = (IT8172_PCI_IO_BASE + IT_UART_BASE), \
-      .irq = IT8172_UART_IRQ, .flags = STD_COM_FLAGS, .type = 0x3 },         \
+      .irq = IT8172_UART_IRQ, .flags = STD_COM_FLAGS, .port = PORT_16550 },         \
     /* Smart Card Reader 1 */ \
     { .baud_base = BASE_BAUD, .port = (IT8172_PCI_IO_BASE + IT_SCR1_BASE), \
-      .irq = IT8172_SCR1_IRQ, .flags = STD_COM_FLAGS, .type = 0x3 },
+      .irq = IT8172_SCR1_IRQ, .flags = STD_COM_FLAGS, .port = PORT_16550 },
 #else
 #define IVR_SERIAL_PORT_DEFNS
 #endif
diff --git a/include/asm-mips/sigcontext.h b/include/asm-mips/sigcontext.h
index 8edabb0be23f..cefa657dd04a 100644
--- a/include/asm-mips/sigcontext.h
+++ b/include/asm-mips/sigcontext.h
@@ -55,8 +55,14 @@ struct sigcontext {
 struct sigcontext {
 	unsigned long	sc_regs[32];
 	unsigned long	sc_fpregs[32];
-	unsigned long	sc_hi[4];
-	unsigned long	sc_lo[4];
+	unsigned long	sc_mdhi;
+	unsigned long	sc_hi1;
+	unsigned long	sc_hi2;
+	unsigned long	sc_hi3;
+	unsigned long	sc_mdlo;
+	unsigned long	sc_lo1;
+	unsigned long	sc_lo2;
+	unsigned long	sc_lo3;
 	unsigned long	sc_pc;
 	unsigned int	sc_fpc_csr;
 	unsigned int	sc_used_math;
diff --git a/include/asm-mips/smp.h b/include/asm-mips/smp.h
index 75c6fe7c2126..e14e4b69de21 100644
--- a/include/asm-mips/smp.h
+++ b/include/asm-mips/smp.h
@@ -48,7 +48,6 @@ extern struct call_data_struct *call_data;
 #define SMP_CALL_FUNCTION	0x2
 
 extern cpumask_t phys_cpu_present_map;
-extern cpumask_t cpu_online_map;
 #define cpu_possible_map	phys_cpu_present_map
 
 extern cpumask_t cpu_callout_map;
@@ -86,9 +85,9 @@ extern void prom_init_secondary(void);
 extern void plat_smp_setup(void);
 
 /*
- * Called after init_IRQ but before __cpu_up.
+ * Called in smp_prepare_cpus.
  */
-extern void prom_prepare_cpus(unsigned int max_cpus);
+extern void plat_prepare_cpus(unsigned int max_cpus);
 
 /*
  * Last chance for the board code to finish SMP initialization before
diff --git a/include/asm-mips/smtc.h b/include/asm-mips/smtc.h
new file mode 100644
index 000000000000..e1941d1b8726
--- /dev/null
+++ b/include/asm-mips/smtc.h
@@ -0,0 +1,55 @@
+#ifndef _ASM_SMTC_MT_H
+#define _ASM_SMTC_MT_H
+
+/*
+ * Definitions for SMTC multitasking on MIPS MT cores
+ */
+
+#include <asm/mips_mt.h>
+
+/*
+ * System-wide SMTC status information
+ */
+
+extern unsigned int smtc_status;
+
+#define SMTC_TLB_SHARED	0x00000001
+#define SMTC_MTC_ACTIVE	0x00000002
+
+/*
+ * TLB/ASID Management information
+ */
+
+#define MAX_SMTC_TLBS 2
+#define MAX_SMTC_ASIDS 256
+#if NR_CPUS <= 8
+typedef char asiduse;
+#else
+#if NR_CPUS <= 16
+typedef short asiduse;
+#else
+typedef long asiduse;
+#endif
+#endif
+
+extern asiduse smtc_live_asid[MAX_SMTC_TLBS][MAX_SMTC_ASIDS];
+
+void smtc_get_new_mmu_context(struct mm_struct *mm, unsigned long cpu);
+
+void smtc_flush_tlb_asid(unsigned long asid);
+extern int mipsmt_build_cpu_map(int startslot);
+extern void mipsmt_prepare_cpus(void);
+extern void smtc_smp_finish(void);
+extern void smtc_boot_secondary(int cpu, struct task_struct *t);
+
+/*
+ * Sharing the TLB between multiple VPEs means that the
+ * "random" index selection function is not allowed to
+ * select the current value of the Index register. To
+ * avoid additional TLB pressure, the Index registers
+ * are "parked" with an non-Valid value.
+ */
+
+#define PARKED_INDEX	((unsigned int)0x80000000)
+
+#endif /*  _ASM_SMTC_MT_H */
diff --git a/include/asm-mips/smtc_ipi.h b/include/asm-mips/smtc_ipi.h
new file mode 100644
index 000000000000..f22c3e2f993a
--- /dev/null
+++ b/include/asm-mips/smtc_ipi.h
@@ -0,0 +1,118 @@
+/*
+ * Definitions used in MIPS MT SMTC "Interprocessor Interrupt" code.
+ */
+#ifndef __ASM_SMTC_IPI_H
+#define __ASM_SMTC_IPI_H
+
+//#define SMTC_IPI_DEBUG
+
+#ifdef SMTC_IPI_DEBUG
+#include <asm/mipsregs.h>
+#include <asm/mipsmtregs.h>
+#endif /* SMTC_IPI_DEBUG */
+
+/*
+ * An IPI "message"
+ */
+
+struct smtc_ipi {
+	struct smtc_ipi *flink;
+	int type;
+	void *arg;
+	int dest;
+#ifdef	SMTC_IPI_DEBUG
+	int sender;
+	long stamp;
+#endif /* SMTC_IPI_DEBUG */
+};
+
+/*
+ * Defined IPI Types
+ */
+
+#define LINUX_SMP_IPI 1
+#define SMTC_CLOCK_TICK 2
+
+/*
+ * A queue of IPI messages
+ */
+
+struct smtc_ipi_q {
+	struct smtc_ipi *head;
+	spinlock_t lock;
+	struct smtc_ipi *tail;
+	int depth;
+};
+
+extern struct smtc_ipi_q IPIQ[NR_CPUS];
+extern struct smtc_ipi_q freeIPIq;
+
+static inline void smtc_ipi_nq(struct smtc_ipi_q *q, struct smtc_ipi *p)
+{
+	long flags;
+
+	spin_lock_irqsave(&q->lock, flags);
+	if (q->head == NULL)
+		q->head = q->tail = p;
+	else
+		q->tail->flink = p;
+	p->flink = NULL;
+	q->tail = p;
+	q->depth++;
+#ifdef	SMTC_IPI_DEBUG
+	p->sender = read_c0_tcbind();
+	p->stamp = read_c0_count();
+#endif /* SMTC_IPI_DEBUG */
+	spin_unlock_irqrestore(&q->lock, flags);
+}
+
+static inline struct smtc_ipi *smtc_ipi_dq(struct smtc_ipi_q *q)
+{
+	struct smtc_ipi *p;
+	long flags;
+
+	spin_lock_irqsave(&q->lock, flags);
+	if (q->head == NULL)
+		p = NULL;
+	else {
+		p = q->head;
+		q->head = q->head->flink;
+		q->depth--;
+		/* Arguably unnecessary, but leaves queue cleaner */
+		if (q->head == NULL)
+			q->tail = NULL;
+	}
+	spin_unlock_irqrestore(&q->lock, flags);
+	return p;
+}
+
+static inline void smtc_ipi_req(struct smtc_ipi_q *q, struct smtc_ipi *p)
+{
+	long flags;
+
+	spin_lock_irqsave(&q->lock, flags);
+	if (q->head == NULL) {
+		q->head = q->tail = p;
+		p->flink = NULL;
+	} else {
+		p->flink = q->head;
+		q->head = p;
+	}
+	q->depth++;
+	spin_unlock_irqrestore(&q->lock, flags);
+}
+
+static inline int smtc_ipi_qdepth(struct smtc_ipi_q *q)
+{
+	long flags;
+	int retval;
+
+	spin_lock_irqsave(&q->lock, flags);
+	retval = q->depth;
+	spin_unlock_irqrestore(&q->lock, flags);
+	return retval;
+}
+
+extern void smtc_send_ipi(int cpu, int type, unsigned int action);
+
+#endif /* __ASM_SMTC_IPI_H */
diff --git a/include/asm-mips/smtc_proc.h b/include/asm-mips/smtc_proc.h
new file mode 100644
index 000000000000..25da651f1f5f
--- /dev/null
+++ b/include/asm-mips/smtc_proc.h
@@ -0,0 +1,23 @@
+/*
+ * Definitions for SMTC /proc entries
+ * Copyright(C) 2005 MIPS Technologies Inc.
+ */
+#ifndef __ASM_SMTC_PROC_H
+#define __ASM_SMTC_PROC_H
+
+/*
+ * per-"CPU" statistics
+ */
+
+struct smtc_cpu_proc {
+	unsigned long timerints;
+	unsigned long selfipis;
+};
+
+extern struct smtc_cpu_proc smtc_cpu_stats[NR_CPUS];
+
+/* Count of number of recoveries of "stolen" FPU access rights on 34K */
+
+extern atomic_t smtc_fpu_recoveries;
+
+#endif /* __ASM_SMTC_PROC_H */
diff --git a/include/asm-mips/sparsemem.h b/include/asm-mips/sparsemem.h
new file mode 100644
index 000000000000..795ac6c23203
--- /dev/null
+++ b/include/asm-mips/sparsemem.h
@@ -0,0 +1,14 @@
+#ifndef _MIPS_SPARSEMEM_H
+#define _MIPS_SPARSEMEM_H
+#ifdef CONFIG_SPARSEMEM
+
+/*
+ * SECTION_SIZE_BITS		2^N: how big each section will be
+ * MAX_PHYSMEM_BITS		2^N: how much memory we can have in that space
+ */
+#define SECTION_SIZE_BITS       28
+#define MAX_PHYSMEM_BITS        35
+
+#endif /* CONFIG_SPARSEMEM */
+#endif /* _MIPS_SPARSEMEM_H */
+
diff --git a/include/asm-mips/stackframe.h b/include/asm-mips/stackframe.h
index 2acf3e844f00..c4856a874965 100644
--- a/include/asm-mips/stackframe.h
+++ b/include/asm-mips/stackframe.h
@@ -14,9 +14,14 @@
 #include <linux/threads.h>
 
 #include <asm/asm.h>
+#include <asm/asmmacro.h>
 #include <asm/mipsregs.h>
 #include <asm/asm-offsets.h>
 
+#ifdef CONFIG_MIPS_MT_SMTC
+#include <asm/mipsmtregs.h>
+#endif /* CONFIG_MIPS_MT_SMTC */
+
 		.macro	SAVE_AT
 		.set	push
 		.set	noat
@@ -57,13 +62,30 @@
 #ifdef CONFIG_SMP
 		.macro	get_saved_sp	/* SMP variation */
 #ifdef CONFIG_32BIT
+#ifdef CONFIG_MIPS_MT_SMTC
+		.set	mips32
+		mfc0	k0, CP0_TCBIND;
+		.set	mips0
+		lui	k1, %hi(kernelsp)
+		srl	k0, k0, 19
+		/* No need to shift down and up to clear bits 0-1 */
+#else
 		mfc0	k0, CP0_CONTEXT
 		lui	k1, %hi(kernelsp)
 		srl	k0, k0, 23
+#endif
 		addu	k1, k0
 		LONG_L	k1, %lo(kernelsp)(k1)
 #endif
 #ifdef CONFIG_64BIT
+#ifdef CONFIG_MIPS_MT_SMTC
+		.set	mips64
+		mfc0	k0, CP0_TCBIND;
+		.set	mips0
+		lui	k0, %highest(kernelsp)
+		dsrl	k1, 19
+		/* No need to shift down and up to clear bits 0-2 */
+#else
 		MFC0	k1, CP0_CONTEXT
 		lui	k0, %highest(kernelsp)
 		dsrl	k1, 23
@@ -71,20 +93,31 @@
 		dsll	k0, k0, 16
 		daddiu	k0, %hi(kernelsp)
 		dsll	k0, k0, 16
+#endif /* CONFIG_MIPS_MT_SMTC */
 		daddu	k1, k1, k0
 		LONG_L	k1, %lo(kernelsp)(k1)
-#endif
+#endif /* CONFIG_64BIT */
 		.endm
 
 		.macro	set_saved_sp stackp temp temp2
 #ifdef CONFIG_32BIT
+#ifdef CONFIG_MIPS_MT_SMTC
+		mfc0	\temp, CP0_TCBIND
+		srl	\temp, 19
+#else
 		mfc0	\temp, CP0_CONTEXT
 		srl	\temp, 23
 #endif
+#endif
 #ifdef CONFIG_64BIT
+#ifdef CONFIG_MIPS_MT_SMTC
+		mfc0	\temp, CP0_TCBIND
+		dsrl	\temp, 19
+#else
 		MFC0	\temp, CP0_CONTEXT
 		dsrl	\temp, 23
 #endif
+#endif
 		LONG_S	\stackp, kernelsp(\temp)
 		.endm
 #else
@@ -122,10 +155,25 @@
 		PTR_SUBU sp, k1, PT_SIZE
 		LONG_S	k0, PT_R29(sp)
 		LONG_S	$3, PT_R3(sp)
+		/*
+		 * You might think that you don't need to save $0,
+		 * but the FPU emulator and gdb remote debug stub
+		 * need it to operate correctly
+		 */
 		LONG_S	$0, PT_R0(sp)
 		mfc0	v1, CP0_STATUS
 		LONG_S	$2, PT_R2(sp)
 		LONG_S	v1, PT_STATUS(sp)
+#ifdef CONFIG_MIPS_MT_SMTC
+		/*
+		 * Ideally, these instructions would be shuffled in
+		 * to cover the pipeline delay.
+		 */
+		.set	mips32
+		mfc0	v1, CP0_TCSTATUS
+		.set	mips0
+		LONG_S	v1, PT_TCSTATUS(sp)
+#endif /* CONFIG_MIPS_MT_SMTC */
 		LONG_S	$4, PT_R4(sp)
 		mfc0	v1, CP0_CAUSE
 		LONG_S	$5, PT_R5(sp)
@@ -234,14 +282,36 @@
 		.endm
 
 #else
+/*
+ * For SMTC kernel, global IE should be left set, and interrupts
+ * controlled exclusively via IXMT.
+ */
 
+#ifdef CONFIG_MIPS_MT_SMTC
+#define STATMASK 0x1e
+#else
+#define STATMASK 0x1f
+#endif
 		.macro	RESTORE_SOME
 		.set	push
 		.set	reorder
 		.set	noat
+#ifdef CONFIG_MIPS_MT_SMTC
+		.set	mips32r2
+		/*
+		 * This may not really be necessary if ints are already
+		 * inhibited here.
+		 */
+		mfc0	v0, CP0_TCSTATUS
+		ori	v0, TCSTATUS_IXMT
+		mtc0	v0, CP0_TCSTATUS
+		ehb
+		DMT	5				# dmt a1
+		jal	mips_ihb
+#endif /* CONFIG_MIPS_MT_SMTC */
 		mfc0	a0, CP0_STATUS
-		ori	a0, 0x1f
-		xori	a0, 0x1f
+		ori	a0, STATMASK
+		xori	a0, STATMASK
 		mtc0	a0, CP0_STATUS
 		li	v1, 0xff00
 		and	a0, v1
@@ -250,6 +320,26 @@
 		and	v0, v1
 		or	v0, a0
 		mtc0	v0, CP0_STATUS
+#ifdef CONFIG_MIPS_MT_SMTC
+/*
+ * Only after EXL/ERL have been restored to status can we
+ * restore TCStatus.IXMT.
+ */
+		LONG_L	v1, PT_TCSTATUS(sp)
+		ehb
+		mfc0	v0, CP0_TCSTATUS
+		andi	v1, TCSTATUS_IXMT
+		/* We know that TCStatua.IXMT should be set from above */
+		xori	v0, v0, TCSTATUS_IXMT
+		or	v0, v0, v1
+		mtc0	v0, CP0_TCSTATUS
+		ehb
+		andi	a1, a1, VPECONTROL_TE
+		beqz	a1, 1f
+		emt
+1:
+		.set	mips0
+#endif /* CONFIG_MIPS_MT_SMTC */
 		LONG_L	v1, PT_EPC(sp)
 		MTC0	v1, CP0_EPC
 		LONG_L	$31, PT_R31(sp)
@@ -302,11 +392,33 @@
  * Set cp0 enable bit as sign that we're running on the kernel stack
  */
 		.macro	CLI
+#if !defined(CONFIG_MIPS_MT_SMTC)
 		mfc0	t0, CP0_STATUS
 		li	t1, ST0_CU0 | 0x1f
 		or	t0, t1
 		xori	t0, 0x1f
 		mtc0	t0, CP0_STATUS
+#else /* CONFIG_MIPS_MT_SMTC */
+		/*
+		 * For SMTC, we need to set privilege
+		 * and disable interrupts only for the
+		 * current TC, using the TCStatus register.
+		 */
+		mfc0	t0,CP0_TCSTATUS
+		/* Fortunately CU 0 is in the same place in both registers */
+		/* Set TCU0, TMX, TKSU (for later inversion) and IXMT */
+		li	t1, ST0_CU0 | 0x08001c00
+		or	t0,t1
+		/* Clear TKSU, leave IXMT */
+		xori	t0, 0x00001800
+		mtc0	t0, CP0_TCSTATUS
+		ehb
+		/* We need to leave the global IE bit set, but clear EXL...*/
+		mfc0	t0, CP0_STATUS
+		ori	t0, ST0_EXL | ST0_ERL
+		xori	t0, ST0_EXL | ST0_ERL
+		mtc0	t0, CP0_STATUS
+#endif /* CONFIG_MIPS_MT_SMTC */
 		irq_disable_hazard
 		.endm
 
@@ -315,11 +427,35 @@
  * Set cp0 enable bit as sign that we're running on the kernel stack
  */
 		.macro	STI
+#if !defined(CONFIG_MIPS_MT_SMTC)
 		mfc0	t0, CP0_STATUS
 		li	t1, ST0_CU0 | 0x1f
 		or	t0, t1
 		xori	t0, 0x1e
 		mtc0	t0, CP0_STATUS
+#else /* CONFIG_MIPS_MT_SMTC */
+		/*
+		 * For SMTC, we need to set privilege
+		 * and enable interrupts only for the
+		 * current TC, using the TCStatus register.
+		 */
+		ehb
+		mfc0	t0,CP0_TCSTATUS
+		/* Fortunately CU 0 is in the same place in both registers */
+		/* Set TCU0, TKSU (for later inversion) and IXMT */
+		li	t1, ST0_CU0 | 0x08001c00
+		or	t0,t1
+		/* Clear TKSU *and* IXMT */
+		xori	t0, 0x00001c00
+		mtc0	t0, CP0_TCSTATUS
+		ehb
+		/* We need to leave the global IE bit set, but clear EXL...*/
+		mfc0	t0, CP0_STATUS
+		ori	t0, ST0_EXL
+		xori	t0, ST0_EXL
+		mtc0	t0, CP0_STATUS
+		/* irq_enable_hazard below should expand to EHB for 24K/34K cpus */
+#endif /* CONFIG_MIPS_MT_SMTC */
 		irq_enable_hazard
 		.endm
 
@@ -328,11 +464,56 @@
  * Set cp0 enable bit as sign that we're running on the kernel stack
  */
 		.macro	KMODE
+#ifdef CONFIG_MIPS_MT_SMTC
+		/*
+		 * This gets baroque in SMTC.  We want to
+		 * protect the non-atomic clearing of EXL
+		 * with DMT/EMT, but we don't want to take
+		 * an interrupt while DMT is still in effect.
+		 */
+
+		/* KMODE gets invoked from both reorder and noreorder code */
+		.set	push
+		.set	mips32r2
+		.set	noreorder
+		mfc0	v0, CP0_TCSTATUS
+		andi	v1, v0, TCSTATUS_IXMT
+		ori	v0, TCSTATUS_IXMT
+		mtc0	v0, CP0_TCSTATUS
+		ehb
+		DMT	2				# dmt	v0
+		/*
+		 * We don't know a priori if ra is "live"
+		 */
+		move	t0, ra
+		jal	mips_ihb
+		nop	/* delay slot */
+		move	ra, t0
+#endif /* CONFIG_MIPS_MT_SMTC */
 		mfc0	t0, CP0_STATUS
 		li	t1, ST0_CU0 | 0x1e
 		or	t0, t1
 		xori	t0, 0x1e
 		mtc0	t0, CP0_STATUS
+#ifdef CONFIG_MIPS_MT_SMTC
+		ehb
+		andi	v0, v0, VPECONTROL_TE
+		beqz	v0, 2f
+		nop	/* delay slot */
+		emt
+2:
+		mfc0	v0, CP0_TCSTATUS
+		/* Clear IXMT, then OR in previous value */
+		ori	v0, TCSTATUS_IXMT
+		xori	v0, TCSTATUS_IXMT
+		or	v0, v1, v0
+		mtc0	v0, CP0_TCSTATUS
+		/*
+		 * irq_disable_hazard below should expand to EHB
+		 * on 24K/34K CPUS
+		 */
+		.set pop
+#endif /* CONFIG_MIPS_MT_SMTC */
 		irq_disable_hazard
 		.endm
 
diff --git a/include/asm-mips/system.h b/include/asm-mips/system.h
index 4097fac5ac3c..261f71d16a07 100644
--- a/include/asm-mips/system.h
+++ b/include/asm-mips/system.h
@@ -155,6 +155,37 @@ extern asmlinkage void *resume(void *last, void *next, void *next_ti);
 
 struct task_struct;
 
+#ifdef CONFIG_MIPS_MT_FPAFF
+
+/*
+ * Handle the scheduler resume end of FPU affinity management.  We do this
+ * inline to try to keep the overhead down. If we have been forced to run on
+ * a "CPU" with an FPU because of a previous high level of FP computation,
+ * but did not actually use the FPU during the most recent time-slice (CU1
+ * isn't set), we undo the restriction on cpus_allowed.
+ *
+ * We're not calling set_cpus_allowed() here, because we have no need to
+ * force prompt migration - we're already switching the current CPU to a
+ * different thread.
+ */
+
+#define switch_to(prev,next,last)					\
+do {									\
+	if (cpu_has_fpu &&						\
+	    (prev->thread.mflags & MF_FPUBOUND) &&			\
+	     (!(KSTK_STATUS(prev) & ST0_CU1))) {			\
+		prev->thread.mflags &= ~MF_FPUBOUND;			\
+		prev->cpus_allowed = prev->thread.user_cpus_allowed;	\
+	}								\
+	if (cpu_has_dsp)						\
+		__save_dsp(prev);					\
+	next->thread.emulated_fp = 0;					\
+	(last) = resume(prev, next, next->thread_info);			\
+	if (cpu_has_dsp)						\
+		__restore_dsp(current);					\
+} while(0)
+
+#else
 #define switch_to(prev,next,last)					\
 do {									\
 	if (cpu_has_dsp)						\
@@ -163,6 +194,7 @@ do {									\
 	if (cpu_has_dsp)						\
 		__restore_dsp(current);					\
 } while(0)
+#endif
 
 /*
  * On SMP systems, when the scheduler does migration-cost autodetection,
@@ -440,8 +472,8 @@ static inline unsigned long __cmpxchg(volatile void * ptr, unsigned long old,
 extern void set_handler (unsigned long offset, void *addr, unsigned long len);
 extern void set_uncached_handler (unsigned long offset, void *addr, unsigned long len);
 extern void *set_vi_handler (int n, void *addr);
-extern void *set_vi_srs_handler (int n, void *addr, int regset);
 extern void *set_except_vector(int n, void *addr);
+extern unsigned long ebase;
 extern void per_cpu_trap_init(void);
 
 extern NORET_TYPE void die(const char *, struct pt_regs *);
diff --git a/include/asm-mips/unistd.h b/include/asm-mips/unistd.h
index b5c78a4a0192..1068fe9a0a58 100644
--- a/include/asm-mips/unistd.h
+++ b/include/asm-mips/unistd.h
@@ -324,16 +324,18 @@
 #define __NR_pselect6			(__NR_Linux + 301)
 #define __NR_ppoll			(__NR_Linux + 302)
 #define __NR_unshare			(__NR_Linux + 303)
+#define __NR_splice			(__NR_Linux + 304)
+#define __NR_sync_file_range		(__NR_Linux + 305)
 
 /*
  * Offset of the last Linux o32 flavoured syscall
  */
-#define __NR_Linux_syscalls		303
+#define __NR_Linux_syscalls		305
 
 #endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */
 
 #define __NR_O32_Linux			4000
-#define __NR_O32_Linux_syscalls		303
+#define __NR_O32_Linux_syscalls		305
 
 #if _MIPS_SIM == _MIPS_SIM_ABI64
 
@@ -604,16 +606,18 @@
 #define __NR_pselect6			(__NR_Linux + 260)
 #define __NR_ppoll			(__NR_Linux + 261)
 #define __NR_unshare			(__NR_Linux + 262)
+#define __NR_splice			(__NR_Linux + 263)
+#define __NR_sync_file_range		(__NR_Linux + 264)
 
 /*
  * Offset of the last Linux 64-bit flavoured syscall
  */
-#define __NR_Linux_syscalls		262
+#define __NR_Linux_syscalls		264
 
 #endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */
 
 #define __NR_64_Linux			5000
-#define __NR_64_Linux_syscalls		262
+#define __NR_64_Linux_syscalls		264
 
 #if _MIPS_SIM == _MIPS_SIM_NABI32
 
@@ -888,16 +892,18 @@
 #define __NR_pselect6			(__NR_Linux + 264)
 #define __NR_ppoll			(__NR_Linux + 265)
 #define __NR_unshare			(__NR_Linux + 266)
+#define __NR_splice			(__NR_Linux + 267)
+#define __NR_sync_file_range		(__NR_Linux + 268)
 
 /*
  * Offset of the last N32 flavoured syscall
  */
-#define __NR_Linux_syscalls		266
+#define __NR_Linux_syscalls		268
 
 #endif /* _MIPS_SIM == _MIPS_SIM_NABI32 */
 
 #define __NR_N32_Linux			6000
-#define __NR_N32_Linux_syscalls		266
+#define __NR_N32_Linux_syscalls		268
 
 #ifndef __ASSEMBLY__
 
diff --git a/include/asm-mips/vpe.h b/include/asm-mips/vpe.h
new file mode 100644
index 000000000000..c6e1b961537d
--- /dev/null
+++ b/include/asm-mips/vpe.h
@@ -0,0 +1,37 @@
+/*
+ * Copyright (C) 2005 MIPS Technologies, Inc.  All rights reserved.
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ */
+
+#ifndef _ASM_VPE_H
+#define _ASM_VPE_H
+
+struct vpe_notifications {
+	void (*start)(int vpe);
+	void (*stop)(int vpe);
+
+	struct list_head list;
+};
+
+
+extern int vpe_notify(int index, struct vpe_notifications *notify);
+
+extern void *vpe_get_shared(int index);
+extern int vpe_getuid(int index);
+extern int vpe_getgid(int index);
+extern char *vpe_getcwd(int index);
+
+#endif /* _ASM_VPE_H */
diff --git a/include/asm-parisc/io.h b/include/asm-parisc/io.h
index 29da31194b91..244f6b8883f4 100644
--- a/include/asm-parisc/io.h
+++ b/include/asm-parisc/io.h
@@ -126,24 +126,17 @@ static inline void gsc_writeq(unsigned long long val, unsigned long addr)
 
 extern void __iomem * __ioremap(unsigned long offset, unsigned long size, unsigned long flags);
 
-extern inline void __iomem * ioremap(unsigned long offset, unsigned long size)
-{
-	return __ioremap(offset, size, 0);
-}
-
-/*
- * This one maps high address device memory and turns off caching for that area.
- * it's useful if some control registers are in such an area and write combining
- * or read caching is not desirable:
+/* Most machines react poorly to I/O-space being cacheable... Instead let's
+ * define ioremap() in terms of ioremap_nocache().
  */
-extern inline void * ioremap_nocache(unsigned long offset, unsigned long size)
+extern inline void __iomem * ioremap(unsigned long offset, unsigned long size)
 {
-        return __ioremap(offset, size, _PAGE_NO_CACHE /* _PAGE_PCD */);
+	return __ioremap(offset, size, _PAGE_NO_CACHE);
 }
+#define ioremap_nocache(off, sz)	ioremap((off), (sz))
 
 extern void iounmap(void __iomem *addr);
 
-
 static inline unsigned char __raw_readb(const volatile void __iomem *addr)
 {
 	return (*(volatile unsigned char __force *) (addr));
diff --git a/include/asm-parisc/page.h b/include/asm-parisc/page.h
index 45e02aa5bf4b..c0dd461fb8f1 100644
--- a/include/asm-parisc/page.h
+++ b/include/asm-parisc/page.h
@@ -1,13 +1,30 @@
 #ifndef _PARISC_PAGE_H
 #define _PARISC_PAGE_H
 
-/* PAGE_SHIFT determines the page size */
-#define PAGE_SHIFT	12
-#define PAGE_SIZE	(1UL << PAGE_SHIFT)
-#define PAGE_MASK	(~(PAGE_SIZE-1))
+#if !defined(__KERNEL__)
+/* this is for userspace applications (4k page size) */
+# define PAGE_SHIFT	12	/* 4k */
+# define PAGE_SIZE	(1UL << PAGE_SHIFT)
+# define PAGE_MASK	(~(PAGE_SIZE-1))
+#endif
+
 
 #ifdef __KERNEL__
 #include <linux/config.h>
+
+#if defined(CONFIG_PARISC_PAGE_SIZE_4KB)
+# define PAGE_SHIFT	12	/* 4k */
+#elif defined(CONFIG_PARISC_PAGE_SIZE_16KB)
+# define PAGE_SHIFT	14	/* 16k */
+#elif defined(CONFIG_PARISC_PAGE_SIZE_64KB)
+# define PAGE_SHIFT	16	/* 64k */
+#else
+# error "unknown default kernel page size"
+#endif
+#define PAGE_SIZE	(1UL << PAGE_SHIFT)
+#define PAGE_MASK	(~(PAGE_SIZE-1))
+
+
 #ifndef __ASSEMBLY__
 
 #include <asm/types.h>
diff --git a/include/asm-parisc/pgtable.h b/include/asm-parisc/pgtable.h
index 4e34c6b44059..aec089eb8b85 100644
--- a/include/asm-parisc/pgtable.h
+++ b/include/asm-parisc/pgtable.h
@@ -59,16 +59,15 @@
 #define  ISTACK_SIZE  32768 /* Interrupt Stack Size */
 #define  ISTACK_ORDER 3
 
-/* This is the size of the initially mapped kernel memory (i.e. currently
- * 0 to 1<<23 == 8MB */
+/* This is the size of the initially mapped kernel memory */
 #ifdef CONFIG_64BIT
-#define KERNEL_INITIAL_ORDER	24
+#define KERNEL_INITIAL_ORDER	24	/* 0 to 1<<24 = 16MB */
 #else
-#define KERNEL_INITIAL_ORDER	23
+#define KERNEL_INITIAL_ORDER	23	/* 0 to 1<<23 = 8MB */
 #endif
 #define KERNEL_INITIAL_SIZE	(1 << KERNEL_INITIAL_ORDER)
 
-#ifdef CONFIG_64BIT
+#if defined(CONFIG_64BIT) && defined(CONFIG_PARISC_PAGE_SIZE_4KB)
 #define PT_NLEVELS	3
 #define PGD_ORDER	1 /* Number of pages per pgd */
 #define PMD_ORDER	1 /* Number of pages per pmd */
@@ -111,11 +110,15 @@
 #define MAX_ADDRBITS	(PGDIR_SHIFT + BITS_PER_PGD)
 #define MAX_ADDRESS	(1UL << MAX_ADDRBITS)
 
-#define SPACEID_SHIFT (MAX_ADDRBITS - 32)
+#define SPACEID_SHIFT	(MAX_ADDRBITS - 32)
 
 /* This calculates the number of initial pages we need for the initial
  * page tables */
-#define PT_INITIAL	(1 << (KERNEL_INITIAL_ORDER - PMD_SHIFT))
+#if (KERNEL_INITIAL_ORDER) >= (PMD_SHIFT)
+# define PT_INITIAL	(1 << (KERNEL_INITIAL_ORDER - PMD_SHIFT))
+#else
+# define PT_INITIAL	(1)  /* all initial PTEs fit into one page */
+#endif
 
 /*
  * pgd entries used up by user/kernel:
@@ -160,6 +163,10 @@ extern  void *vmalloc_start;
  * to zero */
 #define PTE_SHIFT	   	xlate_pabit(_PAGE_USER_BIT)
 
+/* PFN_PTE_SHIFT defines the shift of a PTE value to access the PFN field */
+#define PFN_PTE_SHIFT		12
+
+
 /* this is how many bits may be used by the file functions */
 #define PTE_FILE_MAX_BITS	(BITS_PER_LONG - PTE_SHIFT)
 
@@ -188,7 +195,8 @@ extern  void *vmalloc_start;
 /* The pgd/pmd contains a ptr (in phys addr space); since all pgds/pmds
  * are page-aligned, we don't care about the PAGE_OFFSET bits, except
  * for a few meta-information bits, so we shift the address to be
- * able to effectively address 40-bits of physical address space. */
+ * able to effectively address 40/42/44-bits of physical address space
+ * depending on 4k/16k/64k PAGE_SIZE */
 #define _PxD_PRESENT_BIT   31
 #define _PxD_ATTACHED_BIT  30
 #define _PxD_VALID_BIT     29
@@ -198,7 +206,7 @@ extern  void *vmalloc_start;
 #define PxD_FLAG_VALID    (1 << xlate_pabit(_PxD_VALID_BIT))
 #define PxD_FLAG_MASK     (0xf)
 #define PxD_FLAG_SHIFT    (4)
-#define PxD_VALUE_SHIFT   (8)
+#define PxD_VALUE_SHIFT   (8) /* (PAGE_SHIFT-PxD_FLAG_SHIFT) */
 
 #ifndef __ASSEMBLY__
 
@@ -246,6 +254,7 @@ extern  void *vmalloc_start;
 #define __S110  PAGE_RWX
 #define __S111  PAGE_RWX
 
+
 extern pgd_t swapper_pg_dir[]; /* declared in init_task.c */
 
 /* initial page tables for 0-8MB for kernel */
@@ -272,7 +281,7 @@ extern unsigned long *empty_zero_page;
 #define pgd_flag(x)	(pgd_val(x) & PxD_FLAG_MASK)
 #define pgd_address(x)	((unsigned long)(pgd_val(x) &~ PxD_FLAG_MASK) << PxD_VALUE_SHIFT)
 
-#ifdef CONFIG_64BIT
+#if PT_NLEVELS == 3
 /* The first entry of the permanent pmd is not there if it contains
  * the gateway marker */
 #define pmd_none(x)	(!pmd_val(x) || pmd_flag(x) == PxD_FLAG_ATTACHED)
@@ -282,7 +291,7 @@ extern unsigned long *empty_zero_page;
 #define pmd_bad(x)	(!(pmd_flag(x) & PxD_FLAG_VALID))
 #define pmd_present(x)	(pmd_flag(x) & PxD_FLAG_PRESENT)
 static inline void pmd_clear(pmd_t *pmd) {
-#ifdef CONFIG_64BIT
+#if PT_NLEVELS == 3
 	if (pmd_flag(*pmd) & PxD_FLAG_ATTACHED)
 		/* This is the entry pointing to the permanent pmd
 		 * attached to the pgd; cannot clear it */
@@ -303,7 +312,7 @@ static inline void pmd_clear(pmd_t *pmd) {
 #define pgd_bad(x)      (!(pgd_flag(x) & PxD_FLAG_VALID))
 #define pgd_present(x)  (pgd_flag(x) & PxD_FLAG_PRESENT)
 static inline void pgd_clear(pgd_t *pgd) {
-#ifdef CONFIG_64BIT
+#if PT_NLEVELS == 3
 	if(pgd_flag(*pgd) & PxD_FLAG_ATTACHED)
 		/* This is the permanent pmd attached to the pgd; cannot
 		 * free it */
@@ -351,7 +360,7 @@ extern inline pte_t pte_mkwrite(pte_t pte)	{ pte_val(pte) |= _PAGE_WRITE; return
 ({									\
 	pte_t __pte;							\
 									\
-	pte_val(__pte) = ((addr)+pgprot_val(pgprot));			\
+	pte_val(__pte) = ((((addr)>>PAGE_SHIFT)<<PFN_PTE_SHIFT) + pgprot_val(pgprot));	\
 									\
 	__pte;								\
 })
@@ -361,20 +370,16 @@ extern inline pte_t pte_mkwrite(pte_t pte)	{ pte_val(pte) |= _PAGE_WRITE; return
 static inline pte_t pfn_pte(unsigned long pfn, pgprot_t pgprot)
 {
 	pte_t pte;
-	pte_val(pte) = (pfn << PAGE_SHIFT) | pgprot_val(pgprot);
+	pte_val(pte) = (pfn << PFN_PTE_SHIFT) | pgprot_val(pgprot);
 	return pte;
 }
 
-/* This takes a physical page address that is used by the remapping functions */
-#define mk_pte_phys(physpage, pgprot) \
-({ pte_t __pte; pte_val(__pte) = physpage + pgprot_val(pgprot); __pte; })
-
 extern inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
 { pte_val(pte) = (pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot); return pte; }
 
 /* Permanent address of a page.  On parisc we don't have highmem. */
 
-#define pte_pfn(x) (pte_val(x) >> PAGE_SHIFT)
+#define pte_pfn(x)		(pte_val(x) >> PFN_PTE_SHIFT)
 
 #define pte_page(pte)		(pfn_to_page(pte_pfn(pte)))
 
@@ -499,6 +504,26 @@ static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr,
 
 #endif /* !__ASSEMBLY__ */
 
+
+/* TLB page size encoding - see table 3-1 in parisc20.pdf */
+#define _PAGE_SIZE_ENCODING_4K		0
+#define _PAGE_SIZE_ENCODING_16K	1
+#define _PAGE_SIZE_ENCODING_64K	2
+#define _PAGE_SIZE_ENCODING_256K	3
+#define _PAGE_SIZE_ENCODING_1M		4
+#define _PAGE_SIZE_ENCODING_4M		5
+#define _PAGE_SIZE_ENCODING_16M	6
+#define _PAGE_SIZE_ENCODING_64M	7
+
+#if defined(CONFIG_PARISC_PAGE_SIZE_4KB)
+# define _PAGE_SIZE_ENCODING_DEFAULT _PAGE_SIZE_ENCODING_4K
+#elif defined(CONFIG_PARISC_PAGE_SIZE_16KB)
+# define _PAGE_SIZE_ENCODING_DEFAULT _PAGE_SIZE_ENCODING_16K
+#elif defined(CONFIG_PARISC_PAGE_SIZE_64KB)
+# define _PAGE_SIZE_ENCODING_DEFAULT _PAGE_SIZE_ENCODING_64K
+#endif
+
+
 #define io_remap_pfn_range(vma, vaddr, pfn, size, prot)		\
 		remap_pfn_range(vma, vaddr, pfn, size, prot)
 
diff --git a/include/asm-parisc/unistd.h b/include/asm-parisc/unistd.h
index c56fccbf34ad..0e1a30be2e30 100644
--- a/include/asm-parisc/unistd.h
+++ b/include/asm-parisc/unistd.h
@@ -780,8 +780,14 @@
 #define __NR_readlinkat		(__NR_Linux + 285)
 #define __NR_fchmodat		(__NR_Linux + 286)
 #define __NR_faccessat		(__NR_Linux + 287)
+#define __NR_unshare		(__NR_Linux + 288)
+#define __NR_set_robust_list	(__NR_Linux + 289)
+#define __NR_get_robust_list	(__NR_Linux + 290)
+#define __NR_splice		(__NR_Linux + 291)
+#define __NR_sync_file_range	(__NR_Linux + 292)
+#define __NR_tee		(__NR_Linux + 293)
 
-#define __NR_Linux_syscalls     288
+#define __NR_Linux_syscalls     294
 
 #define HPUX_GATEWAY_ADDR       0xC0000004
 #define LINUX_GATEWAY_ADDR      0x100
diff --git a/include/asm-powerpc/cputable.h b/include/asm-powerpc/cputable.h
index 4321483cce51..9fcf0162d859 100644
--- a/include/asm-powerpc/cputable.h
+++ b/include/asm-powerpc/cputable.h
@@ -22,6 +22,7 @@
 #define PPC_FEATURE_BOOKE		0x00008000
 #define PPC_FEATURE_SMT			0x00004000
 #define PPC_FEATURE_ICACHE_SNOOP	0x00002000
+#define PPC_FEATURE_ARCH_2_05		0x00001000
 
 #ifdef __KERNEL__
 #ifndef __ASSEMBLY__
@@ -320,6 +321,11 @@ extern void do_cpu_ftr_fixups(unsigned long offset);
 	    CPU_FTR_MMCRA | CPU_FTR_SMT | \
 	    CPU_FTR_COHERENT_ICACHE | CPU_FTR_LOCKLESS_TLBIE | \
 	    CPU_FTR_MMCRA_SIHV | CPU_FTR_PURR)
+#define CPU_FTRS_POWER6 (CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | \
+	    CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | \
+	    CPU_FTR_MMCRA | CPU_FTR_SMT | \
+	    CPU_FTR_COHERENT_ICACHE | CPU_FTR_LOCKLESS_TLBIE | \
+	    CPU_FTR_PURR | CPU_FTR_CI_LARGE_PAGE)
 #define CPU_FTRS_CELL	(CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | \
 	    CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | \
 	    CPU_FTR_ALTIVEC_COMP | CPU_FTR_MMCRA | CPU_FTR_SMT | \
@@ -331,8 +337,8 @@ extern void do_cpu_ftr_fixups(unsigned long offset);
 #ifdef __powerpc64__
 #define CPU_FTRS_POSSIBLE	\
 	    (CPU_FTRS_POWER3 | CPU_FTRS_RS64 | CPU_FTRS_POWER4 |	\
-	    CPU_FTRS_PPC970 | CPU_FTRS_POWER5 | CPU_FTRS_CELL |	\
-            CPU_FTR_CI_LARGE_PAGE)
+	    CPU_FTRS_PPC970 | CPU_FTRS_POWER5 | CPU_FTRS_POWER6 |	\
+	    CPU_FTRS_CELL | CPU_FTR_CI_LARGE_PAGE)
 #else
 enum {
 	CPU_FTRS_POSSIBLE =
@@ -376,8 +382,8 @@ enum {
 #ifdef __powerpc64__
 #define CPU_FTRS_ALWAYS		\
 	    (CPU_FTRS_POWER3 & CPU_FTRS_RS64 & CPU_FTRS_POWER4 &	\
-	    CPU_FTRS_PPC970 & CPU_FTRS_POWER5 & CPU_FTRS_CELL &	\
-	    CPU_FTRS_POSSIBLE)
+	    CPU_FTRS_PPC970 & CPU_FTRS_POWER5 & CPU_FTRS_POWER6 &	\
+	    CPU_FTRS_CELL & CPU_FTRS_POSSIBLE)
 #else
 enum {
 	CPU_FTRS_ALWAYS =
diff --git a/include/asm-powerpc/io.h b/include/asm-powerpc/io.h
index 68efbea379c9..f1c2469b8844 100644
--- a/include/asm-powerpc/io.h
+++ b/include/asm-powerpc/io.h
@@ -9,6 +9,9 @@
  * 2 of the License, or (at your option) any later version.
  */
 
+/* Check of existence of legacy devices */
+extern int check_legacy_ioport(unsigned long base_port);
+
 #ifndef CONFIG_PPC64
 #include <asm-ppc/io.h>
 #else
@@ -437,9 +440,6 @@ out:
 #define dma_cache_wback(_start,_size)		do { } while (0)
 #define dma_cache_wback_inv(_start,_size)	do { } while (0)
 
-/* Check of existence of legacy devices */
-extern int check_legacy_ioport(unsigned long base_port);
-
 
 /*
  * Convert a physical pointer to a virtual kernel pointer for /dev/mem
diff --git a/include/asm-powerpc/iommu.h b/include/asm-powerpc/iommu.h
index d5677cbec200..18ca29e9105a 100644
--- a/include/asm-powerpc/iommu.h
+++ b/include/asm-powerpc/iommu.h
@@ -70,17 +70,18 @@ extern void iommu_free_table(struct device_node *dn);
 extern struct iommu_table *iommu_init_table(struct iommu_table * tbl);
 
 extern int iommu_map_sg(struct device *dev, struct iommu_table *tbl,
-		struct scatterlist *sglist, int nelems,
+		struct scatterlist *sglist, int nelems, unsigned long mask,
 		enum dma_data_direction direction);
 extern void iommu_unmap_sg(struct iommu_table *tbl, struct scatterlist *sglist,
 		int nelems, enum dma_data_direction direction);
 
 extern void *iommu_alloc_coherent(struct iommu_table *tbl, size_t size,
-		dma_addr_t *dma_handle, gfp_t flag);
+		dma_addr_t *dma_handle, unsigned long mask, gfp_t flag);
 extern void iommu_free_coherent(struct iommu_table *tbl, size_t size,
 		void *vaddr, dma_addr_t dma_handle);
 extern dma_addr_t iommu_map_single(struct iommu_table *tbl, void *vaddr,
-		size_t size, enum dma_data_direction direction);
+		size_t size, unsigned long mask,
+		enum dma_data_direction direction);
 extern void iommu_unmap_single(struct iommu_table *tbl, dma_addr_t dma_handle,
 		size_t size, enum dma_data_direction direction);
 
diff --git a/include/asm-powerpc/irq.h b/include/asm-powerpc/irq.h
index 51f87d9993b6..7bc6d73b2823 100644
--- a/include/asm-powerpc/irq.h
+++ b/include/asm-powerpc/irq.h
@@ -54,6 +54,13 @@
  */
 extern unsigned int virt_irq_to_real_map[NR_IRQS];
 
+/* The maximum virtual IRQ number that we support.  This
+ * can be set by the platform and will be reduced by the
+ * value of __irq_offset_value.  It defaults to and is
+ * capped by (NR_IRQS - 1).
+ */
+extern unsigned int virt_irq_max;
+
 /* Create a mapping for a real_irq if it doesn't already exist.
  * Return the virtual irq as a convenience.
  */
diff --git a/include/asm-powerpc/machdep.h b/include/asm-powerpc/machdep.h
index 5ed847680754..0f9254c18914 100644
--- a/include/asm-powerpc/machdep.h
+++ b/include/asm-powerpc/machdep.h
@@ -253,7 +253,11 @@ extern struct machdep_calls *machine_id;
 
 #define __machine_desc __attribute__ ((__section__ (".machine.desc")))
 
-#define define_machine(name) struct machdep_calls mach_##name __machine_desc =
+#define define_machine(name)					\
+	extern struct machdep_calls mach_##name;		\
+	EXPORT_SYMBOL(mach_##name);				\
+	struct machdep_calls mach_##name __machine_desc =
+
 #define machine_is(name) \
 	({ \
 		extern struct machdep_calls mach_##name \
diff --git a/include/asm-powerpc/page_64.h b/include/asm-powerpc/page_64.h
index 3fb061bab9ec..eab779c21995 100644
--- a/include/asm-powerpc/page_64.h
+++ b/include/asm-powerpc/page_64.h
@@ -101,6 +101,7 @@ extern unsigned int HPAGE_SHIFT;
 		                      - (1U << GET_HTLB_AREA(addr))) & 0xffff)
 
 #define ARCH_HAS_HUGEPAGE_ONLY_RANGE
+#define ARCH_HAS_HUGETLB_FREE_PGD_RANGE
 #define ARCH_HAS_PREPARE_HUGEPAGE_RANGE
 #define ARCH_HAS_SETCLEAR_HUGE_PTE
 
diff --git a/include/asm-powerpc/pgalloc.h b/include/asm-powerpc/pgalloc.h
index a00ee002cd11..9f0917c68659 100644
--- a/include/asm-powerpc/pgalloc.h
+++ b/include/asm-powerpc/pgalloc.h
@@ -17,11 +17,13 @@ extern kmem_cache_t *pgtable_cache[];
 #define PTE_CACHE_NUM	0
 #define PMD_CACHE_NUM	1
 #define PGD_CACHE_NUM	2
+#define HUGEPTE_CACHE_NUM 3
 #else
 #define PTE_CACHE_NUM	0
 #define PMD_CACHE_NUM	1
 #define PUD_CACHE_NUM	1
 #define PGD_CACHE_NUM	0
+#define HUGEPTE_CACHE_NUM 2
 #endif
 
 /*
diff --git a/include/asm-powerpc/spu.h b/include/asm-powerpc/spu.h
index f431d8b0b651..7cfcff3ef027 100644
--- a/include/asm-powerpc/spu.h
+++ b/include/asm-powerpc/spu.h
@@ -117,6 +117,7 @@ struct spu {
 	struct list_head list;
 	struct list_head sched_list;
 	int number;
+	int nid;
 	u32 isrc;
 	u32 node;
 	u64 flags;
diff --git a/include/asm-powerpc/termbits.h b/include/asm-powerpc/termbits.h
index ebf6055481dc..6d533b07aaf5 100644
--- a/include/asm-powerpc/termbits.h
+++ b/include/asm-powerpc/termbits.h
@@ -153,6 +153,7 @@ struct termios {
 #define HUPCL	00040000
 
 #define CLOCAL	00100000
+#define CMSPAR	  010000000000		/* mark or space (stick) parity */
 #define CRTSCTS	  020000000000		/* flow control */
 
 /* c_lflag bits */
diff --git a/include/asm-powerpc/thread_info.h b/include/asm-powerpc/thread_info.h
index ffc7462d77ba..88b553c6b26c 100644
--- a/include/asm-powerpc/thread_info.h
+++ b/include/asm-powerpc/thread_info.h
@@ -37,6 +37,8 @@ struct thread_info {
 	int		preempt_count;		/* 0 => preemptable,
 						   <0 => BUG */
 	struct restart_block restart_block;
+	unsigned long	local_flags;		/* private flags for thread */
+
 	/* low level flags - has atomic operations done on it */
 	unsigned long	flags ____cacheline_aligned_in_smp;
 };
@@ -143,6 +145,12 @@ static inline struct thread_info *current_thread_info(void)
 				 _TIF_NEED_RESCHED | _TIF_RESTORE_SIGMASK)
 #define _TIF_PERSYSCALL_MASK	(_TIF_RESTOREALL|_TIF_NOERROR)
 
+/* Bits in local_flags */
+/* Don't move TLF_NAPPING without adjusting the code in entry_32.S */
+#define TLF_NAPPING		0	/* idle thread enabled NAP mode */
+
+#define _TLF_NAPPING		(1 << TLF_NAPPING)
+
 #endif /* __KERNEL__ */
 
 #endif /* _ASM_POWERPC_THREAD_INFO_H */
diff --git a/include/asm-powerpc/topology.h b/include/asm-powerpc/topology.h
index 1e19cd00af25..87362a05542b 100644
--- a/include/asm-powerpc/topology.h
+++ b/include/asm-powerpc/topology.h
@@ -4,6 +4,9 @@
 
 #include <linux/config.h>
 
+struct sys_device;
+struct device_node;
+
 #ifdef CONFIG_NUMA
 
 #include <asm/mmzone.h>
@@ -27,6 +30,8 @@ static inline int node_to_first_cpu(int node)
 	return first_cpu(tmp);
 }
 
+int of_node_to_nid(struct device_node *device);
+
 #define pcibus_to_node(node)    (-1)
 #define pcibus_to_cpumask(bus)	(cpu_online_map)
 
@@ -57,10 +62,29 @@ static inline int node_to_first_cpu(int node)
 
 extern void __init dump_numa_cpu_topology(void);
 
+extern int sysfs_add_device_to_node(struct sys_device *dev, int nid);
+extern void sysfs_remove_device_from_node(struct sys_device *dev, int nid);
+
 #else
 
+static inline int of_node_to_nid(struct device_node *device)
+{
+	return 0;
+}
+
 static inline void dump_numa_cpu_topology(void) {}
 
+static inline int sysfs_add_device_to_node(struct sys_device *dev, int nid)
+{
+	return 0;
+}
+
+static inline void sysfs_remove_device_from_node(struct sys_device *dev,
+						int nid)
+{
+}
+
+
 #include <asm-generic/topology.h>
 
 #endif /* CONFIG_NUMA */
diff --git a/include/asm-powerpc/uaccess.h b/include/asm-powerpc/uaccess.h
index 3872e924cdd6..d83fc29c2bbf 100644
--- a/include/asm-powerpc/uaccess.h
+++ b/include/asm-powerpc/uaccess.h
@@ -7,6 +7,7 @@
 #include <linux/sched.h>
 #include <linux/errno.h>
 #include <asm/processor.h>
+#include <asm/page.h>
 
 #define VERIFY_READ	0
 #define VERIFY_WRITE	1
@@ -179,9 +180,11 @@ do {								\
 #define __put_user_nocheck(x, ptr, size)			\
 ({								\
 	long __pu_err;						\
-	might_sleep();						\
+	__typeof__(*(ptr)) __user *__pu_addr = (ptr);		\
+	if (!is_kernel_addr((unsigned long)__pu_addr))		\
+		might_sleep();					\
 	__chk_user_ptr(ptr);					\
-	__put_user_size((x), (ptr), (size), __pu_err);		\
+	__put_user_size((x), __pu_addr, (size), __pu_err);	\
 	__pu_err;						\
 })
 
@@ -258,9 +261,11 @@ do {								\
 ({								\
 	long __gu_err;						\
 	unsigned long __gu_val;					\
+	const __typeof__(*(ptr)) __user *__gu_addr = (ptr);	\
 	__chk_user_ptr(ptr);					\
-	might_sleep();						\
-	__get_user_size(__gu_val, (ptr), (size), __gu_err);	\
+	if (!is_kernel_addr((unsigned long)__gu_addr))		\
+		might_sleep();					\
+	__get_user_size(__gu_val, __gu_addr, (size), __gu_err);	\
 	(x) = (__typeof__(*(ptr)))__gu_val;			\
 	__gu_err;						\
 })
@@ -270,9 +275,11 @@ do {								\
 ({								\
 	long __gu_err;						\
 	long long __gu_val;					\
+	const __typeof__(*(ptr)) __user *__gu_addr = (ptr);	\
 	__chk_user_ptr(ptr);					\
-	might_sleep();						\
-	__get_user_size(__gu_val, (ptr), (size), __gu_err);	\
+	if (!is_kernel_addr((unsigned long)__gu_addr))		\
+		might_sleep();					\
+	__get_user_size(__gu_val, __gu_addr, (size), __gu_err);	\
 	(x) = (__typeof__(*(ptr)))__gu_val;			\
 	__gu_err;						\
 })
diff --git a/include/asm-powerpc/unistd.h b/include/asm-powerpc/unistd.h
index 536ba0873052..edde2462bf52 100644
--- a/include/asm-powerpc/unistd.h
+++ b/include/asm-powerpc/unistd.h
@@ -302,8 +302,29 @@
 #define __NR_ppoll		281
 #define __NR_unshare		282
 #define __NR_splice		283
+#define __NR_tee		284
+#define __NR_vmsplice		285
+#define __NR_openat		286
+#define __NR_mkdirat		287
+#define __NR_mknodat		288
+#define __NR_fchownat		289
+#define __NR_futimesat		290
+#ifdef __powerpc64__
+#define __NR_newfstatat		291
+#else
+#define __NR_fstatat64		291
+#endif
+#define __NR_unlinkat		292
+#define __NR_renameat		293
+#define __NR_linkat		294
+#define __NR_symlinkat		295
+#define __NR_readlinkat		296
+#define __NR_fchmodat		297
+#define __NR_faccessat		298
+#define __NR_get_robust_list	299
+#define __NR_set_robust_list	300
 
-#define __NR_syscalls		284
+#define __NR_syscalls		301
 
 #ifdef __KERNEL__
 #define __NR__exit __NR_exit
@@ -456,6 +477,7 @@ type name(type1 arg1, type2 arg2, type3 arg3, type4 arg4, type5 arg5, type6 arg6
 #ifdef CONFIG_PPC64
 #define __ARCH_WANT_COMPAT_SYS_TIME
 #define __ARCH_WANT_COMPAT_SYS_RT_SIGSUSPEND
+#define __ARCH_WANT_SYS_NEWFSTATAT
 #endif
 
 /*
diff --git a/include/asm-ppc/commproc.h b/include/asm-ppc/commproc.h
index 973e60908234..31f362966a58 100644
--- a/include/asm-ppc/commproc.h
+++ b/include/asm-ppc/commproc.h
@@ -35,6 +35,7 @@
 #define CPM_CR_INIT_TX		((ushort)0x0002)
 #define CPM_CR_HUNT_MODE	((ushort)0x0003)
 #define CPM_CR_STOP_TX		((ushort)0x0004)
+#define CPM_CR_GRA_STOP_TX	((ushort)0x0005)
 #define CPM_CR_RESTART_TX	((ushort)0x0006)
 #define CPM_CR_CLOSE_RX_BD	((ushort)0x0007)
 #define CPM_CR_SET_GADDR	((ushort)0x0008)
diff --git a/include/asm-ppc/cpm2.h b/include/asm-ppc/cpm2.h
index b638b87cebe3..c70344b91049 100644
--- a/include/asm-ppc/cpm2.h
+++ b/include/asm-ppc/cpm2.h
@@ -69,7 +69,7 @@
 #define CPM_CR_INIT_TX		((ushort)0x0002)
 #define CPM_CR_HUNT_MODE	((ushort)0x0003)
 #define CPM_CR_STOP_TX		((ushort)0x0004)
-#define CPM_CR_GRA_STOP_TX      ((ushort)0x0005)
+#define CPM_CR_GRA_STOP_TX	((ushort)0x0005)
 #define CPM_CR_RESTART_TX	((ushort)0x0006)
 #define CPM_CR_SET_GADDR	((ushort)0x0008)
 #define CPM_CR_START_IDMA	((ushort)0x0009)
diff --git a/include/asm-ppc/page.h b/include/asm-ppc/page.h
index a70ba2ee552d..0fb68a0b0181 100644
--- a/include/asm-ppc/page.h
+++ b/include/asm-ppc/page.h
@@ -20,6 +20,7 @@
 /* This must match what is in arch/ppc/Makefile */
 #define PAGE_OFFSET	CONFIG_KERNEL_START
 #define KERNELBASE	PAGE_OFFSET
+#define is_kernel_addr(x)	((x) >= PAGE_OFFSET)
 
 #ifndef __ASSEMBLY__
 
diff --git a/include/asm-ppc/ppc_sys.h b/include/asm-ppc/ppc_sys.h
index 4b94f7059ebe..40f197af6508 100644
--- a/include/asm-ppc/ppc_sys.h
+++ b/include/asm-ppc/ppc_sys.h
@@ -39,6 +39,8 @@
 #error "need definition of ppc_sys_devices"
 #endif
 
+#define PPC_SYS_IORESOURCE_FIXUPPED	0x00000001	
+
 struct ppc_sys_spec {
 	/* PPC sys is matched via (ID & mask) == value, id could be
 	 * PVR, SVR, IMMR, * etc. */
diff --git a/include/asm-ppc/reg_booke.h b/include/asm-ppc/reg_booke.h
index 00ad9c754c78..4944c0fb8bea 100644
--- a/include/asm-ppc/reg_booke.h
+++ b/include/asm-ppc/reg_booke.h
@@ -237,6 +237,7 @@ do {						\
 #endif
 
 /* Bit definitions for CCR1. */
+#define	CCR1_DPC	0x00000100 /* Disable L1 I-Cache/D-Cache parity checking */
 #define	CCR1_TCS	0x00000080 /* Timer Clock Select */
 
 /* Bit definitions for the MCSR. */
diff --git a/include/asm-s390/cache.h b/include/asm-s390/cache.h
index e20cdd9074db..cdf431b061bb 100644
--- a/include/asm-s390/cache.h
+++ b/include/asm-s390/cache.h
@@ -16,4 +16,6 @@
 
 #define ARCH_KMALLOC_MINALIGN	8
 
+#define __read_mostly __attribute__((__section__(".data.read_mostly")))
+
 #endif
diff --git a/include/asm-s390/futex.h b/include/asm-s390/futex.h
index 6a332a9f099c..1802775568b9 100644
--- a/include/asm-s390/futex.h
+++ b/include/asm-s390/futex.h
@@ -1,6 +1,122 @@
-#ifndef _ASM_FUTEX_H
-#define _ASM_FUTEX_H
+#ifndef _ASM_S390_FUTEX_H
+#define _ASM_S390_FUTEX_H
 
-#include <asm-generic/futex.h>
+#ifdef __KERNEL__
 
-#endif
+#include <linux/futex.h>
+#include <asm/errno.h>
+#include <asm/uaccess.h>
+
+#ifndef __s390x__
+#define __futex_atomic_fixup \
+		     ".section __ex_table,\"a\"\n"			\
+		     "   .align 4\n"					\
+		     "   .long  0b,4b,2b,4b,3b,4b\n"			\
+		     ".previous"
+#else /* __s390x__ */
+#define __futex_atomic_fixup \
+		     ".section __ex_table,\"a\"\n"			\
+		     "   .align 8\n"					\
+		     "   .quad  0b,4b,2b,4b,3b,4b\n"			\
+		     ".previous"
+#endif /* __s390x__ */
+
+#define __futex_atomic_op(insn, ret, oldval, newval, uaddr, oparg)	\
+	asm volatile("   sacf 256\n"					\
+		     "0: l   %1,0(%6)\n"				\
+		     "1: " insn						\
+		     "2: cs  %1,%2,0(%6)\n"				\
+		     "3: jl  1b\n"					\
+		     "   lhi %0,0\n"					\
+		     "4: sacf 0\n"					\
+		     __futex_atomic_fixup				\
+		     : "=d" (ret), "=&d" (oldval), "=&d" (newval),	\
+		       "=m" (*uaddr)					\
+		     : "0" (-EFAULT), "d" (oparg), "a" (uaddr),		\
+		       "m" (*uaddr) : "cc" );
+
+static inline int futex_atomic_op_inuser (int encoded_op, int __user *uaddr)
+{
+	int op = (encoded_op >> 28) & 7;
+	int cmp = (encoded_op >> 24) & 15;
+	int oparg = (encoded_op << 8) >> 20;
+	int cmparg = (encoded_op << 20) >> 20;
+	int oldval = 0, newval, ret;
+	if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28))
+		oparg = 1 << oparg;
+
+	if (! access_ok (VERIFY_WRITE, uaddr, sizeof(int)))
+		return -EFAULT;
+
+	inc_preempt_count();
+
+	switch (op) {
+	case FUTEX_OP_SET:
+		__futex_atomic_op("lr %2,%5\n",
+				  ret, oldval, newval, uaddr, oparg);
+		break;
+	case FUTEX_OP_ADD:
+		__futex_atomic_op("lr %2,%1\nar %2,%5\n",
+				  ret, oldval, newval, uaddr, oparg);
+		break;
+	case FUTEX_OP_OR:
+		__futex_atomic_op("lr %2,%1\nor %2,%5\n",
+				  ret, oldval, newval, uaddr, oparg);
+		break;
+	case FUTEX_OP_ANDN:
+		__futex_atomic_op("lr %2,%1\nnr %2,%5\n",
+				  ret, oldval, newval, uaddr, oparg);
+		break;
+	case FUTEX_OP_XOR:
+		__futex_atomic_op("lr %2,%1\nxr %2,%5\n",
+				  ret, oldval, newval, uaddr, oparg);
+		break;
+	default:
+		ret = -ENOSYS;
+	}
+
+	dec_preempt_count();
+
+	if (!ret) {
+		switch (cmp) {
+		case FUTEX_OP_CMP_EQ: ret = (oldval == cmparg); break;
+		case FUTEX_OP_CMP_NE: ret = (oldval != cmparg); break;
+		case FUTEX_OP_CMP_LT: ret = (oldval < cmparg); break;
+		case FUTEX_OP_CMP_GE: ret = (oldval >= cmparg); break;
+		case FUTEX_OP_CMP_LE: ret = (oldval <= cmparg); break;
+		case FUTEX_OP_CMP_GT: ret = (oldval > cmparg); break;
+		default: ret = -ENOSYS;
+		}
+	}
+	return ret;
+}
+
+static inline int
+futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval)
+{
+	int ret;
+
+	if (! access_ok (VERIFY_WRITE, uaddr, sizeof(int)))
+		return -EFAULT;
+	asm volatile("   cs   %1,%4,0(%5)\n"
+		     "0: lr   %0,%1\n"
+		     "1:\n"
+#ifndef __s390x__
+		     ".section __ex_table,\"a\"\n"
+		     "   .align 4\n"
+		     "   .long  0b,1b\n"
+		     ".previous"
+#else /* __s390x__ */
+		     ".section __ex_table,\"a\"\n"
+		     "   .align 8\n"
+		     "   .quad  0b,1b\n"
+		     ".previous"
+#endif /* __s390x__ */
+		     : "=d" (ret), "+d" (oldval), "=m" (*uaddr)
+		     : "0" (-EFAULT), "d" (newval), "a" (uaddr), "m" (*uaddr)
+		     : "cc", "memory" );
+	return oldval;
+}
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_S390_FUTEX_H */
diff --git a/include/asm-s390/lowcore.h b/include/asm-s390/lowcore.h
index db0606c1abd4..bea727904287 100644
--- a/include/asm-s390/lowcore.h
+++ b/include/asm-s390/lowcore.h
@@ -98,8 +98,8 @@
 #define __LC_KERNEL_ASCE		0xD58
 #define __LC_USER_ASCE			0xD60
 #define __LC_PANIC_STACK                0xD68
-#define __LC_CPUID                      0xD90
-#define __LC_CPUADDR                    0xD98
+#define __LC_CPUID			0xD80
+#define __LC_CPUADDR			0xD88
 #define __LC_IPLDEV                     0xDB8
 #define __LC_JIFFY_TIMER		0xDC0
 #define __LC_CURRENT			0xDD8
diff --git a/include/asm-s390/unistd.h b/include/asm-s390/unistd.h
index 657d582e8149..41c2792ff6b0 100644
--- a/include/asm-s390/unistd.h
+++ b/include/asm-s390/unistd.h
@@ -296,8 +296,14 @@
 #define __NR_pselect6		301
 #define __NR_ppoll		302
 #define __NR_unshare		303
+#define __NR_set_robust_list	304
+#define __NR_get_robust_list	305
+#define __NR_splice		306
+#define __NR_sync_file_range	307
+#define __NR_tee		308
+#define __NR_vmsplice		309
 
-#define NR_syscalls 304
+#define NR_syscalls 310
 
 /* 
  * There are some system calls that are not present on 64 bit, some
diff --git a/include/asm-sparc/unistd.h b/include/asm-sparc/unistd.h
index 264f0ebeaedc..45a576507785 100644
--- a/include/asm-sparc/unistd.h
+++ b/include/asm-sparc/unistd.h
@@ -41,7 +41,7 @@
 #define __NR_capset		 22 /* Linux Specific				   */
 #define __NR_setuid              23 /* Implemented via setreuid in SunOS           */
 #define __NR_getuid              24 /* Common                                      */
-/* #define __NR_time alias	 25    ENOSYS under SunOS			   */
+#define __NR_vmsplice	         25 /* ENOSYS under SunOS			   */
 #define __NR_ptrace              26 /* Common                                      */
 #define __NR_alarm               27 /* Implemented via setitimer in SunOS          */
 #define __NR_sigaltstack	 28 /* Common					   */
@@ -248,7 +248,7 @@
 #define __NR_setfsgid           229 /* Linux Specific                              */
 #define __NR__newselect         230 /* Linux Specific                              */
 #define __NR_time               231 /* Linux Specific                              */
-#define __NR_sys_splice         232 /* Linux Specific                              */
+#define __NR_splice             232 /* Linux Specific                              */
 #define __NR_stime              233 /* Linux Specific                              */
 #define __NR_statfs64           234 /* Linux Specific                              */
 #define __NR_fstatfs64          235 /* Linux Specific                              */
@@ -271,7 +271,7 @@
 #define __NR_getsid             252
 #define __NR_fdatasync          253
 #define __NR_nfsservctl         254
-#define __NR_sys_sync_file_range 255
+#define __NR_sync_file_range	255
 #define __NR_clock_settime	256
 #define __NR_clock_gettime	257
 #define __NR_clock_getres	258
@@ -296,7 +296,7 @@
 #define __NR_mq_notify		277
 #define __NR_mq_getsetattr	278
 #define __NR_waitid		279
-#define __NR_sys_setaltroot	280
+#define __NR_tee		280
 #define __NR_add_key		281
 #define __NR_request_key	282
 #define __NR_keyctl		283
@@ -316,11 +316,13 @@
 #define __NR_pselect6		297
 #define __NR_ppoll		298
 #define __NR_unshare		299
+#define __NR_set_robust_list	300
+#define __NR_get_robust_list	301
 
-/* WARNING: You MAY NOT add syscall numbers larger than 299, since
+/* WARNING: You MAY NOT add syscall numbers larger than 301, since
  *          all of the syscall tables in the Sparc kernel are
- *          sized to have 299 entries (starting at zero).  Therefore
- *          find a free slot in the 0-299 range.
+ *          sized to have 301 entries (starting at zero).  Therefore
+ *          find a free slot in the 0-301 range.
  */
 
 #define _syscall0(type,name) \
diff --git a/include/asm-sparc64/dma-mapping.h b/include/asm-sparc64/dma-mapping.h
index c7d5804ba76d..a8d39f23d43b 100644
--- a/include/asm-sparc64/dma-mapping.h
+++ b/include/asm-sparc64/dma-mapping.h
@@ -4,7 +4,146 @@
 #include <linux/config.h>
 
 #ifdef CONFIG_PCI
-#include <asm-generic/dma-mapping.h>
+
+/* we implement the API below in terms of the existing PCI one,
+ * so include it */
+#include <linux/pci.h>
+/* need struct page definitions */
+#include <linux/mm.h>
+
+static inline int
+dma_supported(struct device *dev, u64 mask)
+{
+	BUG_ON(dev->bus != &pci_bus_type);
+
+	return pci_dma_supported(to_pci_dev(dev), mask);
+}
+
+static inline int
+dma_set_mask(struct device *dev, u64 dma_mask)
+{
+	BUG_ON(dev->bus != &pci_bus_type);
+
+	return pci_set_dma_mask(to_pci_dev(dev), dma_mask);
+}
+
+static inline void *
+dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle,
+		   gfp_t flag)
+{
+	BUG_ON(dev->bus != &pci_bus_type);
+
+	return pci_iommu_ops->alloc_consistent(to_pci_dev(dev), size, dma_handle, flag);
+}
+
+static inline void
+dma_free_coherent(struct device *dev, size_t size, void *cpu_addr,
+		    dma_addr_t dma_handle)
+{
+	BUG_ON(dev->bus != &pci_bus_type);
+
+	pci_free_consistent(to_pci_dev(dev), size, cpu_addr, dma_handle);
+}
+
+static inline dma_addr_t
+dma_map_single(struct device *dev, void *cpu_addr, size_t size,
+	       enum dma_data_direction direction)
+{
+	BUG_ON(dev->bus != &pci_bus_type);
+
+	return pci_map_single(to_pci_dev(dev), cpu_addr, size, (int)direction);
+}
+
+static inline void
+dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
+		 enum dma_data_direction direction)
+{
+	BUG_ON(dev->bus != &pci_bus_type);
+
+	pci_unmap_single(to_pci_dev(dev), dma_addr, size, (int)direction);
+}
+
+static inline dma_addr_t
+dma_map_page(struct device *dev, struct page *page,
+	     unsigned long offset, size_t size,
+	     enum dma_data_direction direction)
+{
+	BUG_ON(dev->bus != &pci_bus_type);
+
+	return pci_map_page(to_pci_dev(dev), page, offset, size, (int)direction);
+}
+
+static inline void
+dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size,
+	       enum dma_data_direction direction)
+{
+	BUG_ON(dev->bus != &pci_bus_type);
+
+	pci_unmap_page(to_pci_dev(dev), dma_address, size, (int)direction);
+}
+
+static inline int
+dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
+	   enum dma_data_direction direction)
+{
+	BUG_ON(dev->bus != &pci_bus_type);
+
+	return pci_map_sg(to_pci_dev(dev), sg, nents, (int)direction);
+}
+
+static inline void
+dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries,
+	     enum dma_data_direction direction)
+{
+	BUG_ON(dev->bus != &pci_bus_type);
+
+	pci_unmap_sg(to_pci_dev(dev), sg, nhwentries, (int)direction);
+}
+
+static inline void
+dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, size_t size,
+			enum dma_data_direction direction)
+{
+	BUG_ON(dev->bus != &pci_bus_type);
+
+	pci_dma_sync_single_for_cpu(to_pci_dev(dev), dma_handle,
+				    size, (int)direction);
+}
+
+static inline void
+dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle, size_t size,
+			   enum dma_data_direction direction)
+{
+	BUG_ON(dev->bus != &pci_bus_type);
+
+	pci_dma_sync_single_for_device(to_pci_dev(dev), dma_handle,
+				       size, (int)direction);
+}
+
+static inline void
+dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nelems,
+		    enum dma_data_direction direction)
+{
+	BUG_ON(dev->bus != &pci_bus_type);
+
+	pci_dma_sync_sg_for_cpu(to_pci_dev(dev), sg, nelems, (int)direction);
+}
+
+static inline void
+dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nelems,
+		       enum dma_data_direction direction)
+{
+	BUG_ON(dev->bus != &pci_bus_type);
+
+	pci_dma_sync_sg_for_device(to_pci_dev(dev), sg, nelems, (int)direction);
+}
+
+static inline int
+dma_mapping_error(dma_addr_t dma_addr)
+{
+	return pci_dma_mapping_error(dma_addr);
+}
+
 #else
 
 struct device;
diff --git a/include/asm-sparc64/pci.h b/include/asm-sparc64/pci.h
index 7c5a589ea437..e1ea67bc32f2 100644
--- a/include/asm-sparc64/pci.h
+++ b/include/asm-sparc64/pci.h
@@ -42,7 +42,7 @@ static inline void pcibios_penalize_isa_irq(int irq, int active)
 struct pci_dev;
 
 struct pci_iommu_ops {
-	void *(*alloc_consistent)(struct pci_dev *, size_t, dma_addr_t *);
+	void *(*alloc_consistent)(struct pci_dev *, size_t, dma_addr_t *, gfp_t);
 	void (*free_consistent)(struct pci_dev *, size_t, void *, dma_addr_t);
 	dma_addr_t (*map_single)(struct pci_dev *, void *, size_t, int);
 	void (*unmap_single)(struct pci_dev *, dma_addr_t, size_t, int);
@@ -59,7 +59,7 @@ extern struct pci_iommu_ops *pci_iommu_ops;
  */
 static inline void *pci_alloc_consistent(struct pci_dev *hwdev, size_t size, dma_addr_t *dma_handle)
 {
-	return pci_iommu_ops->alloc_consistent(hwdev, size, dma_handle);
+	return pci_iommu_ops->alloc_consistent(hwdev, size, dma_handle, GFP_ATOMIC);
 }
 
 /* Free and unmap a consistent DMA buffer.
diff --git a/include/asm-sparc64/pgtable.h b/include/asm-sparc64/pgtable.h
index c44e7466534e..cd464f469a2c 100644
--- a/include/asm-sparc64/pgtable.h
+++ b/include/asm-sparc64/pgtable.h
@@ -689,6 +689,23 @@ static inline void set_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *p
 #define pte_clear(mm,addr,ptep)		\
 	set_pte_at((mm), (addr), (ptep), __pte(0UL))
 
+#ifdef DCACHE_ALIASING_POSSIBLE
+#define __HAVE_ARCH_MOVE_PTE
+#define move_pte(pte, prot, old_addr, new_addr)				\
+({									\
+ 	pte_t newpte = (pte);						\
+	if (tlb_type != hypervisor && pte_present(pte)) {		\
+		unsigned long this_pfn = pte_pfn(pte);			\
+									\
+		if (pfn_valid(this_pfn) &&				\
+		    (((old_addr) ^ (new_addr)) & (1 << 13)))		\
+			flush_dcache_page_all(current->mm,		\
+					      pfn_to_page(this_pfn));	\
+	}								\
+	newpte;								\
+})
+#endif
+
 extern pgd_t swapper_pg_dir[2048];
 extern pmd_t swapper_low_pmd_dir[2048];
 
diff --git a/include/asm-sparc64/tlbflush.h b/include/asm-sparc64/tlbflush.h
index 9ad5d9c51d42..e3a7c453b500 100644
--- a/include/asm-sparc64/tlbflush.h
+++ b/include/asm-sparc64/tlbflush.h
@@ -22,8 +22,6 @@ extern void flush_tlb_pending(void);
 /* Local cpu only.  */
 extern void __flush_tlb_all(void);
 
-extern void __flush_tlb_page(unsigned long context, unsigned long page, unsigned long r);
-
 extern void __flush_tlb_kernel_range(unsigned long start, unsigned long end);
 
 #ifndef CONFIG_SMP
diff --git a/include/asm-sparc64/unistd.h b/include/asm-sparc64/unistd.h
index d0544b4f47b7..998ef4ab0e06 100644
--- a/include/asm-sparc64/unistd.h
+++ b/include/asm-sparc64/unistd.h
@@ -41,7 +41,7 @@
 #define __NR_capset		 22 /* Linux Specific				   */
 #define __NR_setuid              23 /* Implemented via setreuid in SunOS           */
 #define __NR_getuid              24 /* Common                                      */
-/* #define __NR_time alias	 25    ENOSYS under SunOS			   */
+#define __NR_vmsplice	         25 /* ENOSYS under SunOS			   */
 #define __NR_ptrace              26 /* Common                                      */
 #define __NR_alarm               27 /* Implemented via setitimer in SunOS          */
 #define __NR_sigaltstack	 28 /* Common					   */
@@ -250,7 +250,7 @@
 #ifdef __KERNEL__
 #define __NR_time		231 /* Linux sparc32                               */
 #endif
-#define __NR_sys_splice         232 /* Linux Specific                              */
+#define __NR_splice             232 /* Linux Specific                              */
 #define __NR_stime              233 /* Linux Specific                              */
 #define __NR_statfs64           234 /* Linux Specific                              */
 #define __NR_fstatfs64          235 /* Linux Specific                              */
@@ -273,7 +273,7 @@
 #define __NR_getsid             252
 #define __NR_fdatasync          253
 #define __NR_nfsservctl         254
-#define __NR_sys_sync_file_range 255
+#define __NR_sync_file_range	255
 #define __NR_clock_settime	256
 #define __NR_clock_gettime	257
 #define __NR_clock_getres	258
@@ -298,7 +298,7 @@
 #define __NR_mq_notify		277
 #define __NR_mq_getsetattr	278
 #define __NR_waitid		279
-/*#define __NR_sys_setaltroot	280 available (was setaltroot) */
+#define __NR_tee		280
 #define __NR_add_key		281
 #define __NR_request_key	282
 #define __NR_keyctl		283
@@ -318,11 +318,13 @@
 #define __NR_pselect6		297
 #define __NR_ppoll		298
 #define __NR_unshare		299
+#define __NR_set_robust_list	300
+#define __NR_get_robust_list	301
 
-/* WARNING: You MAY NOT add syscall numbers larger than 299, since
+/* WARNING: You MAY NOT add syscall numbers larger than 301, since
  *          all of the syscall tables in the Sparc kernel are
- *          sized to have 299 entries (starting at zero).  Therefore
- *          find a free slot in the 0-299 range.
+ *          sized to have 301 entries (starting at zero).  Therefore
+ *          find a free slot in the 0-301 range.
  */
 
 #define _syscall0(type,name) \
diff --git a/include/asm-um/irqflags.h b/include/asm-um/irqflags.h
new file mode 100644
index 000000000000..659b9abdfdba
--- /dev/null
+++ b/include/asm-um/irqflags.h
@@ -0,0 +1,6 @@
+#ifndef __UM_IRQFLAGS_H
+#define __UM_IRQFLAGS_H
+
+/* Empty for now */
+
+#endif
diff --git a/include/asm-um/uaccess.h b/include/asm-um/uaccess.h
index bea5a015f667..16c734af9193 100644
--- a/include/asm-um/uaccess.h
+++ b/include/asm-um/uaccess.h
@@ -41,11 +41,11 @@
 
 #define __get_user(x, ptr) \
 ({ \
-	const __typeof__(ptr) __private_ptr = ptr;	\
+	const __typeof__(*(ptr)) __user *__private_ptr = (ptr);	\
 	__typeof__(x) __private_val;			\
 	int __private_ret = -EFAULT;			\
 	(x) = (__typeof__(*(__private_ptr)))0;				\
-	if (__copy_from_user((void *) &__private_val, (__private_ptr),	\
+	if (__copy_from_user((__force void *)&__private_val, (__private_ptr),\
 			     sizeof(*(__private_ptr))) == 0) {		\
 		(x) = (__typeof__(*(__private_ptr))) __private_val;	\
 		__private_ret = 0;					\
@@ -62,7 +62,7 @@
 
 #define __put_user(x, ptr) \
 ({ \
-        __typeof__(ptr) __private_ptr = ptr; \
+        __typeof__(*(ptr)) __user *__private_ptr = ptr; \
         __typeof__(*(__private_ptr)) __private_val; \
         int __private_ret = -EFAULT; \
         __private_val = (__typeof__(*(__private_ptr))) (x); \
diff --git a/include/asm-x86_64/cache.h b/include/asm-x86_64/cache.h
index c8043a16152e..f8dff1c67538 100644
--- a/include/asm-x86_64/cache.h
+++ b/include/asm-x86_64/cache.h
@@ -20,8 +20,8 @@
        __attribute__((__section__(".data.page_aligned")))
 #endif
 
-#define __read_mostly __attribute__((__section__(".data.read_mostly")))
-
 #endif
 
+#define __read_mostly __attribute__((__section__(".data.read_mostly")))
+
 #endif
diff --git a/include/asm-x86_64/cpufeature.h b/include/asm-x86_64/cpufeature.h
index 76bb6193ae91..662964b74e34 100644
--- a/include/asm-x86_64/cpufeature.h
+++ b/include/asm-x86_64/cpufeature.h
@@ -64,6 +64,7 @@
 #define X86_FEATURE_REP_GOOD	(3*32+ 4) /* rep microcode works well on this CPU */
 #define X86_FEATURE_CONSTANT_TSC (3*32+5) /* TSC runs at constant rate */
 #define X86_FEATURE_SYNC_RDTSC  (3*32+6)  /* RDTSC syncs CPU core */
+#define X86_FEATURE_FXSAVE_LEAK (3*32+7)  /* FIP/FOP/FDP leaks through FXSAVE */
 
 /* Intel-defined CPU features, CPUID level 0x00000001 (ecx), word 4 */
 #define X86_FEATURE_XMM3	(4*32+ 0) /* Streaming SIMD Extensions-3 */
diff --git a/include/asm-x86_64/e820.h b/include/asm-x86_64/e820.h
index 93b51df51687..670a3388e70a 100644
--- a/include/asm-x86_64/e820.h
+++ b/include/asm-x86_64/e820.h
@@ -59,6 +59,8 @@ extern void __init parse_memopt(char *p, char **end);
 extern void __init parse_memmapopt(char *p, char **end);
 
 extern struct e820map e820;
+
+extern unsigned ebda_addr, ebda_size;
 #endif/*!__ASSEMBLY__*/
 
 #endif/*__E820_HEADER*/
diff --git a/include/asm-x86_64/elf.h b/include/asm-x86_64/elf.h
index c98633af07d2..b4f8f4a41a6e 100644
--- a/include/asm-x86_64/elf.h
+++ b/include/asm-x86_64/elf.h
@@ -159,7 +159,7 @@ extern int dump_task_fpu (struct task_struct *, elf_fpregset_t *);
 #define ELF_CORE_COPY_FPREGS(tsk, elf_fpregs) dump_task_fpu(tsk, elf_fpregs)
 
 /* 1GB for 64bit, 8MB for 32bit */
-#define STACK_RND_MASK (is_compat_task() ? 0x7ff : 0x3fffff)
+#define STACK_RND_MASK (test_thread_flag(TIF_IA32) ? 0x7ff : 0x3fffff)
 
 #endif
 
diff --git a/include/asm-x86_64/i387.h b/include/asm-x86_64/i387.h
index 876eb9a2fe78..cba8a3b0cded 100644
--- a/include/asm-x86_64/i387.h
+++ b/include/asm-x86_64/i387.h
@@ -72,6 +72,23 @@ extern int set_fpregs(struct task_struct *tsk,
 #define set_fpu_swd(t,val) ((t)->thread.i387.fxsave.swd = (val))
 #define set_fpu_fxsr_twd(t,val) ((t)->thread.i387.fxsave.twd = (val))
 
+#define X87_FSW_ES (1 << 7)	/* Exception Summary */
+
+/* AMD CPUs don't save/restore FDP/FIP/FOP unless an exception
+   is pending. Clear the x87 state here by setting it to fixed
+   values. The kernel data segment can be sometimes 0 and sometimes
+   new user value. Both should be ok.
+   Use the PDA as safe address because it should be already in L1. */
+static inline void clear_fpu_state(struct i387_fxsave_struct *fx)
+{
+	if (unlikely(fx->swd & X87_FSW_ES))
+		 asm volatile("fnclex");
+	alternative_input(ASM_NOP8 ASM_NOP2,
+	     	     "    emms\n"		/* clear stack tags */
+	     	     "    fildl %%gs:0",	/* load to clear state */
+		     X86_FEATURE_FXSAVE_LEAK);
+}
+
 static inline int restore_fpu_checking(struct i387_fxsave_struct *fx) 
 { 
 	int err;
@@ -119,6 +136,7 @@ static inline int save_i387_checking(struct i387_fxsave_struct __user *fx)
 #endif
 	if (unlikely(err))
 		__clear_user(fx, sizeof(struct i387_fxsave_struct));
+	/* No need to clear here because the caller clears USED_MATH */
 	return err;
 } 
 
@@ -149,7 +167,7 @@ static inline void __fxsave_clear(struct task_struct *tsk)
 				"i" (offsetof(__typeof__(*tsk),
 					      thread.i387.fxsave)));
 #endif
-	__asm__ __volatile__("fnclex");
+	clear_fpu_state(&tsk->thread.i387.fxsave);
 }
 
 static inline void kernel_fpu_begin(void)
diff --git a/include/asm-x86_64/io_apic.h b/include/asm-x86_64/io_apic.h
index ee1bc69aec9c..52484e82c641 100644
--- a/include/asm-x86_64/io_apic.h
+++ b/include/asm-x86_64/io_apic.h
@@ -205,6 +205,7 @@ extern int skip_ioapic_setup;
 extern int io_apic_get_version (int ioapic);
 extern int io_apic_get_redir_entries (int ioapic);
 extern int io_apic_set_pci_routing (int ioapic, int pin, int irq, int, int);
+extern int timer_uses_ioapic_pin_0;
 #endif
 
 extern int sis_apic_bug; /* dummy */ 
diff --git a/include/asm-x86_64/mmzone.h b/include/asm-x86_64/mmzone.h
index 6b18cd8f293d..6944e7122df5 100644
--- a/include/asm-x86_64/mmzone.h
+++ b/include/asm-x86_64/mmzone.h
@@ -12,7 +12,8 @@
 
 #include <asm/smp.h>
 
-#define NODEMAPSIZE 0xfff
+/* Should really switch to dynamic allocation at some point */
+#define NODEMAPSIZE 0x4fff
 
 /* Simple perfect hash to map physical addresses to node numbers */
 struct memnode {
diff --git a/include/asm-x86_64/percpu.h b/include/asm-x86_64/percpu.h
index 4405b4adeaba..7f33aaf9f7b1 100644
--- a/include/asm-x86_64/percpu.h
+++ b/include/asm-x86_64/percpu.h
@@ -26,7 +26,7 @@
 #define percpu_modcopy(pcpudst, src, size)			\
 do {								\
 	unsigned int __i;					\
-	for_each_cpu(__i)					\
+	for_each_possible_cpu(__i)				\
 		memcpy((pcpudst)+__per_cpu_offset(__i),		\
 		       (src), (size));				\
 } while (0)
diff --git a/include/asm-x86_64/unistd.h b/include/asm-x86_64/unistd.h
index f21ff2c1e960..feb77cb8c044 100644
--- a/include/asm-x86_64/unistd.h
+++ b/include/asm-x86_64/unistd.h
@@ -611,8 +611,14 @@ __SYSCALL(__NR_set_robust_list, sys_set_robust_list)
 __SYSCALL(__NR_get_robust_list, sys_get_robust_list)
 #define __NR_splice		275
 __SYSCALL(__NR_splice, sys_splice)
-
-#define __NR_syscall_max __NR_splice
+#define __NR_tee		276
+__SYSCALL(__NR_tee, sys_tee)
+#define __NR_sync_file_range	277
+__SYSCALL(__NR_sync_file_range, sys_sync_file_range)
+#define __NR_vmsplice		278
+__SYSCALL(__NR_vmsplice, sys_vmsplice)
+
+#define __NR_syscall_max __NR_vmsplice
 
 #ifndef __NO_STUBS
 
diff --git a/include/asm-xtensa/ioctls.h b/include/asm-xtensa/ioctls.h
index 10c443435c11..3b89a772d0a0 100644
--- a/include/asm-xtensa/ioctls.h
+++ b/include/asm-xtensa/ioctls.h
@@ -107,6 +107,6 @@
 #define TIOCSERSETMULTI _IOW('T', 91, struct serial_multiport_struct) /* Set multiport config */
 
 #define TIOCMIWAIT	_IO('T', 92) /* wait for a change on serial input line(s) */
-#define TIOCGICOUNT	_IOR('T', 93, struct async_icount) /* read serial port inline interrupt counts */
+#define TIOCGICOUNT	0x545D	/* read serial port inline interrupt counts */
 
 #endif /* _XTENSA_IOCTLS_H */
diff --git a/include/asm-xtensa/signal.h b/include/asm-xtensa/signal.h
index 5d6fc9cdf58d..a99c9aec64ec 100644
--- a/include/asm-xtensa/signal.h
+++ b/include/asm-xtensa/signal.h
@@ -118,9 +118,9 @@ typedef struct {
  * SA_INTERRUPT is also used by the irq handling routines.
  * SA_SHIRQ is for shared interrupt support on PCI and EISA.
  */
-#define SA_PROBE		SA_ONESHOT
 #define SA_SAMPLE_RANDOM	SA_RESTART
 #define SA_SHIRQ		0x04000000
+#define SA_PROBEIRQ		0x08000000
 #endif
 
 #define SIG_BLOCK          0	/* for blocking signals */
diff --git a/include/linux/audit.h b/include/linux/audit.h
index 1c47c59058c1..b74c148f14e3 100644
--- a/include/linux/audit.h
+++ b/include/linux/audit.h
@@ -83,6 +83,7 @@
 #define AUDIT_CONFIG_CHANGE	1305	/* Audit system configuration change */
 #define AUDIT_SOCKADDR		1306	/* sockaddr copied as syscall arg */
 #define AUDIT_CWD		1307	/* Current working directory */
+#define AUDIT_IPC_SET_PERM	1311	/* IPC new permissions record type */
 
 #define AUDIT_AVC		1400	/* SE Linux avc denial or grant */
 #define AUDIT_SELINUX_ERR	1401	/* Internal SE Linux Errors */
@@ -145,6 +146,11 @@
 #define AUDIT_PERS	10
 #define AUDIT_ARCH	11
 #define AUDIT_MSGTYPE	12
+#define AUDIT_SE_USER	13	/* security label user */
+#define AUDIT_SE_ROLE	14	/* security label role */
+#define AUDIT_SE_TYPE	15	/* security label type */
+#define AUDIT_SE_SEN	16	/* security label sensitivity label */
+#define AUDIT_SE_CLR	17	/* security label clearance label */
 
 				/* These are ONLY useful when checking
 				 * at syscall exit time (AUDIT_AT_EXIT). */
@@ -287,10 +293,10 @@ struct netlink_skb_parms;
 				/* Public API */
 extern int  audit_alloc(struct task_struct *task);
 extern void audit_free(struct task_struct *task);
-extern void audit_syscall_entry(struct task_struct *task, int arch,
+extern void audit_syscall_entry(int arch,
 				int major, unsigned long a0, unsigned long a1,
 				unsigned long a2, unsigned long a3);
-extern void audit_syscall_exit(struct task_struct *task, int failed, long return_code);
+extern void audit_syscall_exit(int failed, long return_code);
 extern void audit_getname(const char *name);
 extern void audit_putname(const char *name);
 extern void __audit_inode(const char *name, const struct inode *inode, unsigned flags);
@@ -314,7 +320,8 @@ extern void auditsc_get_stamp(struct audit_context *ctx,
 			      struct timespec *t, unsigned int *serial);
 extern int  audit_set_loginuid(struct task_struct *task, uid_t loginuid);
 extern uid_t audit_get_loginuid(struct audit_context *ctx);
-extern int audit_ipc_perms(unsigned long qbytes, uid_t uid, gid_t gid, mode_t mode, struct kern_ipc_perm *ipcp);
+extern int audit_ipc_obj(struct kern_ipc_perm *ipcp);
+extern int audit_ipc_set_perm(unsigned long qbytes, uid_t uid, gid_t gid, mode_t mode, struct kern_ipc_perm *ipcp);
 extern int audit_socketcall(int nargs, unsigned long *args);
 extern int audit_sockaddr(int len, void *addr);
 extern int audit_avc_path(struct dentry *dentry, struct vfsmount *mnt);
@@ -323,8 +330,8 @@ extern int audit_set_macxattr(const char *name);
 #else
 #define audit_alloc(t) ({ 0; })
 #define audit_free(t) do { ; } while (0)
-#define audit_syscall_entry(t,ta,a,b,c,d,e) do { ; } while (0)
-#define audit_syscall_exit(t,f,r) do { ; } while (0)
+#define audit_syscall_entry(ta,a,b,c,d,e) do { ; } while (0)
+#define audit_syscall_exit(f,r) do { ; } while (0)
 #define audit_getname(n) do { ; } while (0)
 #define audit_putname(n) do { ; } while (0)
 #define __audit_inode(n,i,f) do { ; } while (0)
@@ -333,7 +340,8 @@ extern int audit_set_macxattr(const char *name);
 #define audit_inode_child(d,i,p) do { ; } while (0)
 #define auditsc_get_stamp(c,t,s) do { BUG(); } while (0)
 #define audit_get_loginuid(c) ({ -1; })
-#define audit_ipc_perms(q,u,g,m,i) ({ 0; })
+#define audit_ipc_obj(i) ({ 0; })
+#define audit_ipc_set_perm(q,u,g,m,i) ({ 0; })
 #define audit_socketcall(n,a) ({ 0; })
 #define audit_sockaddr(len, addr) ({ 0; })
 #define audit_avc_path(dentry, mnt) ({ 0; })
@@ -366,7 +374,7 @@ extern void		    audit_log_d_path(struct audit_buffer *ab,
 extern int audit_filter_user(struct netlink_skb_parms *cb, int type);
 extern int audit_filter_type(int type);
 extern int  audit_receive_filter(int type, int pid, int uid, int seq,
-				 void *data, size_t datasz, uid_t loginuid);
+			 void *data, size_t datasz, uid_t loginuid, u32 sid);
 #else
 #define audit_log(c,g,t,f,...) do { ; } while (0)
 #define audit_log_start(c,g,t) ({ NULL; })
diff --git a/include/linux/debugfs.h b/include/linux/debugfs.h
index 176e2d371577..047567d34ca7 100644
--- a/include/linux/debugfs.h
+++ b/include/linux/debugfs.h
@@ -58,9 +58,8 @@ struct dentry *debugfs_create_blob(const char *name, mode_t mode,
  */
 
 static inline struct dentry *debugfs_create_file(const char *name, mode_t mode,
-						 struct dentry *parent,
-						 void *data,
-						 struct file_operations *fops)
+					struct dentry *parent, void *data,
+					const struct file_operations *fops)
 {
 	return ERR_PTR(-ENODEV);
 }
diff --git a/include/linux/device.h b/include/linux/device.h
index f6e72a65a3f2..e8e53b9accc6 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -200,6 +200,7 @@ extern int class_device_create_file(struct class_device *,
  * @node: for internal use by the driver core only.
  * @kobj: for internal use by the driver core only.
  * @devt_attr: for internal use by the driver core only.
+ * @groups: optional additional groups to be created
  * @dev: if set, a symlink to the struct device is created in the sysfs
  * directory for this struct class device.
  * @class_data: pointer to whatever you want to store here for this struct
@@ -228,6 +229,7 @@ struct class_device {
 	struct device		* dev;		/* not necessary, but nice to have */
 	void			* class_data;	/* class-specific data */
 	struct class_device	*parent;	/* parent of this child device, if there is one */
+	struct attribute_group  ** groups;	/* optional groups */
 
 	void	(*release)(struct class_device *dev);
 	int	(*uevent)(struct class_device *dev, char **envp,
diff --git a/include/linux/dma-mapping.h b/include/linux/dma-mapping.h
index ff61817082fa..635690cf3e3d 100644
--- a/include/linux/dma-mapping.h
+++ b/include/linux/dma-mapping.h
@@ -14,6 +14,7 @@ enum dma_data_direction {
 };
 
 #define DMA_64BIT_MASK	0xffffffffffffffffULL
+#define DMA_48BIT_MASK	0x0000ffffffffffffULL
 #define DMA_40BIT_MASK	0x000000ffffffffffULL
 #define DMA_39BIT_MASK	0x0000007fffffffffULL
 #define DMA_32BIT_MASK	0x00000000ffffffffULL
diff --git a/include/linux/elevator.h b/include/linux/elevator.h
index ad133fcfb239..1713ace808bf 100644
--- a/include/linux/elevator.h
+++ b/include/linux/elevator.h
@@ -21,7 +21,7 @@ typedef void (elevator_put_req_fn) (request_queue_t *, struct request *);
 typedef void (elevator_activate_req_fn) (request_queue_t *, struct request *);
 typedef void (elevator_deactivate_req_fn) (request_queue_t *, struct request *);
 
-typedef int (elevator_init_fn) (request_queue_t *, elevator_t *);
+typedef void *(elevator_init_fn) (request_queue_t *, elevator_t *);
 typedef void (elevator_exit_fn) (elevator_t *);
 
 struct elevator_ops
diff --git a/include/linux/firmware.h b/include/linux/firmware.h
index 2d716080be4a..33d8f2087b6e 100644
--- a/include/linux/firmware.h
+++ b/include/linux/firmware.h
@@ -19,5 +19,4 @@ int request_firmware_nowait(
 	void (*cont)(const struct firmware *fw, void *context));
 
 void release_firmware(const struct firmware *fw);
-void register_firmware(const char *name, const u8 *data, size_t size);
 #endif
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 162c6e57307a..f813bc8266aa 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -213,6 +213,10 @@ extern int dir_notify_enable;
 #define FIBMAP	   _IO(0x00,1)	/* bmap access */
 #define FIGETBSZ   _IO(0x00,2)	/* get the block size used for bmap */
 
+#define SYNC_FILE_RANGE_WAIT_BEFORE	1
+#define SYNC_FILE_RANGE_WRITE		2
+#define SYNC_FILE_RANGE_WAIT_AFTER	4
+
 #ifdef __KERNEL__
 
 #include <linux/linkage.h>
@@ -758,9 +762,6 @@ extern int fcntl_setlease(unsigned int fd, struct file *filp, long arg);
 extern int fcntl_getlease(struct file *filp);
 
 /* fs/sync.c */
-#define SYNC_FILE_RANGE_WAIT_BEFORE	1
-#define SYNC_FILE_RANGE_WRITE		2
-#define SYNC_FILE_RANGE_WAIT_AFTER	4
 extern int do_sync_file_range(struct file *file, loff_t offset, loff_t endbyte,
 			unsigned int flags);
 
@@ -1039,8 +1040,8 @@ struct file_operations {
 	int (*check_flags)(int);
 	int (*dir_notify)(struct file *filp, unsigned long arg);
 	int (*flock) (struct file *, int, struct file_lock *);
-	ssize_t (*splice_write)(struct pipe_inode_info *, struct file *, size_t, unsigned int);
-	ssize_t (*splice_read)(struct file *, struct pipe_inode_info *, size_t, unsigned int);
+	ssize_t (*splice_write)(struct pipe_inode_info *, struct file *, loff_t *, size_t, unsigned int);
+	ssize_t (*splice_read)(struct file *, loff_t *, struct pipe_inode_info *, size_t, unsigned int);
 };
 
 struct inode_operations {
@@ -1613,13 +1614,13 @@ extern void do_generic_mapping_read(struct address_space *mapping,
 				    loff_t *, read_descriptor_t *, read_actor_t);
 
 /* fs/splice.c */
-extern ssize_t generic_file_splice_read(struct file *,
+extern ssize_t generic_file_splice_read(struct file *, loff_t *,
 		struct pipe_inode_info *, size_t, unsigned int);
 extern ssize_t generic_file_splice_write(struct pipe_inode_info *,
-		struct file *, size_t, unsigned int);
+		struct file *, loff_t *, size_t, unsigned int);
 extern ssize_t generic_splice_sendpage(struct pipe_inode_info *pipe,
-		struct file *out, size_t len, unsigned int flags);
-extern long do_splice_direct(struct file *in, struct file *out,
+		struct file *out, loff_t *, size_t len, unsigned int flags);
+extern long do_splice_direct(struct file *in, loff_t *ppos, struct file *out,
 		size_t len, unsigned int flags);
 
 extern void
diff --git a/include/linux/fs_uart_pd.h b/include/linux/fs_uart_pd.h
new file mode 100644
index 000000000000..f5975126b712
--- /dev/null
+++ b/include/linux/fs_uart_pd.h
@@ -0,0 +1,60 @@
+/*
+ * Platform information definitions for the CPM Uart driver.
+ *
+ * 2006 (c) MontaVista Software, Inc.
+ * Vitaly Bordug <vbordug@ru.mvista.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#ifndef FS_UART_PD_H
+#define FS_UART_PD_H
+
+#include <linux/version.h>
+#include <asm/types.h>
+
+enum fs_uart_id {
+	fsid_smc1_uart,
+	fsid_smc2_uart,
+	fsid_scc1_uart,
+	fsid_scc2_uart,
+	fsid_scc3_uart,
+	fsid_scc4_uart,
+	fs_uart_nr,
+};
+
+static inline int fs_uart_id_scc2fsid(int id)
+{
+    return fsid_scc1_uart + id - 1;
+}
+
+static inline int fs_uart_id_fsid2scc(int id)
+{
+    return id - fsid_scc1_uart + 1;
+}
+
+static inline int fs_uart_id_smc2fsid(int id)
+{
+    return fsid_smc1_uart + id - 1;
+}
+
+static inline int fs_uart_id_fsid2smc(int id)
+{
+    return id - fsid_smc1_uart + 1;
+}
+
+struct fs_uart_platform_info {
+        void(*init_ioports)(void);
+	/* device specific information */
+	int fs_no;		/* controller index */
+	u32 uart_clk;
+	u8 tx_num_fifo;
+	u8 tx_buf_size;
+	u8 rx_num_fifo;
+	u8 rx_buf_size;
+	u8 brg;
+};
+
+#endif
diff --git a/include/linux/fsl_devices.h b/include/linux/fsl_devices.h
index a3a0e078f79d..16fbe59edeb1 100644
--- a/include/linux/fsl_devices.h
+++ b/include/linux/fsl_devices.h
@@ -110,5 +110,16 @@ struct fsl_usb2_platform_data {
 #define FSL_USB2_PORT0_ENABLED	0x00000001
 #define FSL_USB2_PORT1_ENABLED	0x00000002
 
+struct fsl_spi_platform_data {
+	u32 	initial_spmode;	/* initial SPMODE value */
+	u16	bus_num;
+
+	/* board specific information */
+	u16	max_chipselect;
+	void	(*activate_cs)(u8 cs, u8 polarity);
+	void	(*deactivate_cs)(u8 cs, u8 polarity);
+	u32	sysclk;
+};
+
 #endif				/* _FSL_DEVICE_H_ */
 #endif				/* __KERNEL__ */
diff --git a/include/linux/genhd.h b/include/linux/genhd.h
index 10a27f29d692..2ef845b35175 100644
--- a/include/linux/genhd.h
+++ b/include/linux/genhd.h
@@ -105,6 +105,7 @@ struct gendisk {
                                          * disks that can't be partitioned. */
 	char disk_name[32];		/* name of major driver */
 	struct hd_struct **part;	/* [indexed by minor] */
+	int part_uevent_suppress;
 	struct block_device_operations *fops;
 	struct request_queue *queue;
 	void *private_data;
diff --git a/include/linux/ide.h b/include/linux/ide.h
index 8d2db412ba9c..a8bef1d1371c 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -1220,7 +1220,6 @@ typedef struct ide_pci_enablebit_s {
 enum {
 	/* Uses ISA control ports not PCI ones. */
 	IDEPCI_FLAG_ISA_PORTS		= (1 << 0),
-	IDEPCI_FLAG_FORCE_PDC		= (1 << 1),
 };
 
 typedef struct ide_pci_device_s {
diff --git a/include/linux/input.h b/include/linux/input.h
index b0e612dda0cf..ce1a756c4c30 100644
--- a/include/linux/input.h
+++ b/include/linux/input.h
@@ -12,8 +12,6 @@
 #ifdef __KERNEL__
 #include <linux/time.h>
 #include <linux/list.h>
-#include <linux/device.h>
-#include <linux/mod_devicetable.h>
 #else
 #include <sys/time.h>
 #include <sys/ioctl.h>
@@ -58,6 +56,8 @@ struct input_absinfo {
 
 #define EVIOCGVERSION		_IOR('E', 0x01, int)			/* get driver version */
 #define EVIOCGID		_IOR('E', 0x02, struct input_id)	/* get device ID */
+#define EVIOCGREP		_IOR('E', 0x03, int[2])			/* get repeat settings */
+#define EVIOCSREP		_IOW('E', 0x03, int[2])			/* set repeat settings */
 #define EVIOCGKEYCODE		_IOR('E', 0x04, int[2])			/* get keycode */
 #define EVIOCSKEYCODE		_IOW('E', 0x04, int[2])			/* set keycode */
 
@@ -345,6 +345,8 @@ struct input_absinfo {
 #define KEY_SAVE		234
 #define KEY_DOCUMENTS		235
 
+#define KEY_BATTERY		236
+
 #define KEY_UNKNOWN		240
 
 #define BTN_MISC		0x100
@@ -577,15 +579,10 @@ struct input_absinfo {
  * Switch events
  */
 
-#define SW_0		0x00
-#define SW_1		0x01
-#define SW_2		0x02
-#define SW_3		0x03
-#define SW_4		0x04
-#define SW_5		0x05
-#define SW_6		0x06
-#define SW_7		0x07
-#define SW_MAX		0x0f
+#define SW_LID			0x00  /* set = lid shut */
+#define SW_TABLET_MODE		0x01  /* set = tablet mode */
+#define SW_HEADPHONE_INSERT	0x02  /* set = inserted */
+#define SW_MAX			0x0f
 
 /*
  * Misc events
@@ -805,52 +802,16 @@ struct ff_effect {
 
 #define FF_MAX		0x7f
 
-struct input_device_id {
-
-	kernel_ulong_t flags;
-
-	struct input_id id;
-
-	kernel_ulong_t evbit[EV_MAX/BITS_PER_LONG+1];
-	kernel_ulong_t keybit[KEY_MAX/BITS_PER_LONG+1];
-	kernel_ulong_t relbit[REL_MAX/BITS_PER_LONG+1];
-	kernel_ulong_t absbit[ABS_MAX/BITS_PER_LONG+1];
-	kernel_ulong_t mscbit[MSC_MAX/BITS_PER_LONG+1];
-	kernel_ulong_t ledbit[LED_MAX/BITS_PER_LONG+1];
-	kernel_ulong_t sndbit[SND_MAX/BITS_PER_LONG+1];
-	kernel_ulong_t ffbit[FF_MAX/BITS_PER_LONG+1];
-	kernel_ulong_t swbit[SW_MAX/BITS_PER_LONG+1];
-
-	kernel_ulong_t driver_info;
-};
-
-/*
- * Structure for hotplug & device<->driver matching.
- */
-
-#define INPUT_DEVICE_ID_MATCH_BUS	1
-#define INPUT_DEVICE_ID_MATCH_VENDOR	2
-#define INPUT_DEVICE_ID_MATCH_PRODUCT	4
-#define INPUT_DEVICE_ID_MATCH_VERSION	8
-
-#define INPUT_DEVICE_ID_MATCH_EVBIT	0x010
-#define INPUT_DEVICE_ID_MATCH_KEYBIT	0x020
-#define INPUT_DEVICE_ID_MATCH_RELBIT	0x040
-#define INPUT_DEVICE_ID_MATCH_ABSBIT	0x080
-#define INPUT_DEVICE_ID_MATCH_MSCIT	0x100
-#define INPUT_DEVICE_ID_MATCH_LEDBIT	0x200
-#define INPUT_DEVICE_ID_MATCH_SNDBIT	0x400
-#define INPUT_DEVICE_ID_MATCH_FFBIT	0x800
-#define INPUT_DEVICE_ID_MATCH_SWBIT	0x1000
-
 #ifdef __KERNEL__
 
 /*
  * In-kernel definitions.
  */
 
+#include <linux/device.h>
 #include <linux/fs.h>
 #include <linux/timer.h>
+#include <linux/mod_devicetable.h>
 
 #define NBITS(x) (((x)/BITS_PER_LONG)+1)
 #define BIT(x)	(1UL<<((x)%BITS_PER_LONG))
@@ -951,9 +912,49 @@ struct input_dev {
 };
 #define to_input_dev(d) container_of(d, struct input_dev, cdev)
 
-#define INPUT_DEVICE_ID_MATCH_DEVICE\
+/*
+ * Verify that we are in sync with input_device_id mod_devicetable.h #defines
+ */
+
+#if EV_MAX != INPUT_DEVICE_ID_EV_MAX
+#error "EV_MAX and INPUT_DEVICE_ID_EV_MAX do not match"
+#endif
+
+#if KEY_MAX != INPUT_DEVICE_ID_KEY_MAX
+#error "KEY_MAX and INPUT_DEVICE_ID_KEY_MAX do not match"
+#endif
+
+#if REL_MAX != INPUT_DEVICE_ID_REL_MAX
+#error "REL_MAX and INPUT_DEVICE_ID_REL_MAX do not match"
+#endif
+
+#if ABS_MAX != INPUT_DEVICE_ID_ABS_MAX
+#error "ABS_MAX and INPUT_DEVICE_ID_ABS_MAX do not match"
+#endif
+
+#if MSC_MAX != INPUT_DEVICE_ID_MSC_MAX
+#error "MSC_MAX and INPUT_DEVICE_ID_MSC_MAX do not match"
+#endif
+
+#if LED_MAX != INPUT_DEVICE_ID_LED_MAX
+#error "LED_MAX and INPUT_DEVICE_ID_LED_MAX do not match"
+#endif
+
+#if SND_MAX != INPUT_DEVICE_ID_SND_MAX
+#error "SND_MAX and INPUT_DEVICE_ID_SND_MAX do not match"
+#endif
+
+#if FF_MAX != INPUT_DEVICE_ID_FF_MAX
+#error "FF_MAX and INPUT_DEVICE_ID_FF_MAX do not match"
+#endif
+
+#if SW_MAX != INPUT_DEVICE_ID_SW_MAX
+#error "SW_MAX and INPUT_DEVICE_ID_SW_MAX do not match"
+#endif
+
+#define INPUT_DEVICE_ID_MATCH_DEVICE \
 	(INPUT_DEVICE_ID_MATCH_BUS | INPUT_DEVICE_ID_MATCH_VENDOR | INPUT_DEVICE_ID_MATCH_PRODUCT)
-#define INPUT_DEVICE_ID_MATCH_DEVICE_AND_VERSION\
+#define INPUT_DEVICE_ID_MATCH_DEVICE_AND_VERSION \
 	(INPUT_DEVICE_ID_MATCH_DEVICE | INPUT_DEVICE_ID_MATCH_VERSION)
 
 struct input_handle;
@@ -1016,7 +1017,8 @@ static inline void input_put_device(struct input_dev *dev)
 
 static inline void input_free_device(struct input_dev *dev)
 {
-	input_put_device(dev);
+	if (dev)
+		input_put_device(dev);
 }
 
 int input_register_device(struct input_dev *);
diff --git a/include/linux/kernel.h b/include/linux/kernel.h
index e1bd0842f6a1..f4fc576ed4c4 100644
--- a/include/linux/kernel.h
+++ b/include/linux/kernel.h
@@ -124,6 +124,7 @@ extern int get_option(char **str, int *pint);
 extern char *get_options(const char *str, int nints, int *ints);
 extern unsigned long long memparse(char *ptr, char **retptr);
 
+extern int core_kernel_text(unsigned long addr);
 extern int __kernel_text_address(unsigned long addr);
 extern int kernel_text_address(unsigned long addr);
 extern int session_of_pgrp(int pgrp);
diff --git a/include/linux/kobject.h b/include/linux/kobject.h
index 4cb1214ec290..c187c53cecd0 100644
--- a/include/linux/kobject.h
+++ b/include/linux/kobject.h
@@ -24,6 +24,7 @@
 #include <linux/rwsem.h>
 #include <linux/kref.h>
 #include <linux/kernel.h>
+#include <linux/wait.h>
 #include <asm/atomic.h>
 
 #define KOBJ_NAME_LEN			20
@@ -56,6 +57,7 @@ struct kobject {
 	struct kset		* kset;
 	struct kobj_type	* ktype;
 	struct dentry		* dentry;
+	wait_queue_head_t	poll;
 };
 
 extern int kobject_set_name(struct kobject *, const char *, ...)
@@ -255,9 +257,8 @@ struct subsys_attribute {
 };
 
 extern int subsys_create_file(struct subsystem * , struct subsys_attribute *);
-extern void subsys_remove_file(struct subsystem * , struct subsys_attribute *);
 
-#if defined(CONFIG_HOTPLUG) && defined(CONFIG_NET)
+#if defined(CONFIG_HOTPLUG)
 void kobject_uevent(struct kobject *kobj, enum kobject_action action);
 
 int add_uevent_var(char **envp, int num_envp, int *cur_index,
diff --git a/include/linux/list.h b/include/linux/list.h
index 67258b47e9ca..76f05718342c 100644
--- a/include/linux/list.h
+++ b/include/linux/list.h
@@ -619,7 +619,7 @@ static inline void hlist_del_rcu(struct hlist_node *n)
 
 static inline void hlist_del_init(struct hlist_node *n)
 {
-	if (n->pprev)  {
+	if (!hlist_unhashed(n)) {
 		__hlist_del(n);
 		INIT_HLIST_NODE(n);
 	}
diff --git a/include/linux/m48t86.h b/include/linux/m48t86.h
index 9065199319d0..915d6b4f0f89 100644
--- a/include/linux/m48t86.h
+++ b/include/linux/m48t86.h
@@ -11,6 +11,6 @@
 
 struct m48t86_ops
 {
-	void (*writeb)(unsigned char value, unsigned long addr);
-	unsigned char (*readb)(unsigned long addr);
+	void (*writebyte)(unsigned char value, unsigned long addr);
+	unsigned char (*readbyte)(unsigned long addr);
 };
diff --git a/include/linux/memory_hotplug.h b/include/linux/memory_hotplug.h
index 4ca3e6ad03ec..911206386171 100644
--- a/include/linux/memory_hotplug.h
+++ b/include/linux/memory_hotplug.h
@@ -99,10 +99,7 @@ static inline int __remove_pages(struct zone *zone, unsigned long start_pfn,
 	return -ENOSYS;
 }
 
-#if defined(CONFIG_MEMORY_HOTPLUG) || defined(CONFIG_ACPI_HOTPLUG_MEMORY) \
-	|| defined(CONFIG_ACPI_HOTPLUG_MEMORY_MODULE)
 extern int add_memory(u64 start, u64 size);
 extern int remove_memory(u64 start, u64 size);
-#endif
 
 #endif /* __LINUX_MEMORY_HOTPLUG_H */
diff --git a/include/linux/mempolicy.h b/include/linux/mempolicy.h
index 6a7621b2b12b..f5fdca1d67e6 100644
--- a/include/linux/mempolicy.h
+++ b/include/linux/mempolicy.h
@@ -36,6 +36,7 @@
 #include <linux/nodemask.h>
 
 struct vm_area_struct;
+struct mm_struct;
 
 #ifdef CONFIG_NUMA
 
diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h
index 30dd978c1ec8..991a37382a22 100644
--- a/include/linux/mmc/card.h
+++ b/include/linux/mmc/card.h
@@ -28,6 +28,7 @@ struct mmc_csd {
 	unsigned short		cmdclass;
 	unsigned short		tacc_clks;
 	unsigned int		tacc_ns;
+	unsigned int		r2w_factor;
 	unsigned int		max_dtr;
 	unsigned int		read_blkbits;
 	unsigned int		write_blkbits;
diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h
index bdc556d88498..03a14a30c46a 100644
--- a/include/linux/mmc/mmc.h
+++ b/include/linux/mmc/mmc.h
@@ -69,6 +69,7 @@ struct mmc_data {
 	unsigned int		timeout_ns;	/* data timeout (in ns, max 80ms) */
 	unsigned int		timeout_clks;	/* data timeout (in clocks) */
 	unsigned int		blksz_bits;	/* data block size */
+	unsigned int		blksz;		/* data block size */
 	unsigned int		blocks;		/* number of blocks */
 	unsigned int		error;		/* data error */
 	unsigned int		flags;
diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h
index b5c21122c299..2d8337150493 100644
--- a/include/linux/mmzone.h
+++ b/include/linux/mmzone.h
@@ -15,6 +15,7 @@
 #include <linux/seqlock.h>
 #include <linux/nodemask.h>
 #include <asm/atomic.h>
+#include <asm/page.h>
 
 /* Free memory management - zoned buddy allocator.  */
 #ifndef CONFIG_FORCE_MAX_ZONEORDER
@@ -22,6 +23,7 @@
 #else
 #define MAX_ORDER CONFIG_FORCE_MAX_ZONEORDER
 #endif
+#define MAX_ORDER_NR_PAGES (1 << (MAX_ORDER - 1))
 
 struct free_area {
 	struct list_head	free_list;
diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h
index 7b08c11ec4cc..f6977708585c 100644
--- a/include/linux/mod_devicetable.h
+++ b/include/linux/mod_devicetable.h
@@ -249,4 +249,52 @@ struct i2c_device_id {
 	__u16 id;
 };
 
+/* Input */
+#define INPUT_DEVICE_ID_EV_MAX		0x1f
+#define INPUT_DEVICE_ID_KEY_MAX		0x1ff
+#define INPUT_DEVICE_ID_REL_MAX		0x0f
+#define INPUT_DEVICE_ID_ABS_MAX		0x3f
+#define INPUT_DEVICE_ID_MSC_MAX		0x07
+#define INPUT_DEVICE_ID_LED_MAX		0x0f
+#define INPUT_DEVICE_ID_SND_MAX		0x07
+#define INPUT_DEVICE_ID_FF_MAX		0x7f
+#define INPUT_DEVICE_ID_SW_MAX		0x0f
+
+#define INPUT_DEVICE_ID_MATCH_BUS	1
+#define INPUT_DEVICE_ID_MATCH_VENDOR	2
+#define INPUT_DEVICE_ID_MATCH_PRODUCT	4
+#define INPUT_DEVICE_ID_MATCH_VERSION	8
+
+#define INPUT_DEVICE_ID_MATCH_EVBIT	0x0010
+#define INPUT_DEVICE_ID_MATCH_KEYBIT	0x0020
+#define INPUT_DEVICE_ID_MATCH_RELBIT	0x0040
+#define INPUT_DEVICE_ID_MATCH_ABSBIT	0x0080
+#define INPUT_DEVICE_ID_MATCH_MSCIT	0x0100
+#define INPUT_DEVICE_ID_MATCH_LEDBIT	0x0200
+#define INPUT_DEVICE_ID_MATCH_SNDBIT	0x0400
+#define INPUT_DEVICE_ID_MATCH_FFBIT	0x0800
+#define INPUT_DEVICE_ID_MATCH_SWBIT	0x1000
+
+struct input_device_id {
+
+	kernel_ulong_t flags;
+
+	__u16 bustype;
+	__u16 vendor;
+	__u16 product;
+	__u16 version;
+
+	kernel_ulong_t evbit[INPUT_DEVICE_ID_EV_MAX / BITS_PER_LONG + 1];
+	kernel_ulong_t keybit[INPUT_DEVICE_ID_KEY_MAX / BITS_PER_LONG + 1];
+	kernel_ulong_t relbit[INPUT_DEVICE_ID_REL_MAX / BITS_PER_LONG + 1];
+	kernel_ulong_t absbit[INPUT_DEVICE_ID_ABS_MAX / BITS_PER_LONG + 1];
+	kernel_ulong_t mscbit[INPUT_DEVICE_ID_MSC_MAX / BITS_PER_LONG + 1];
+	kernel_ulong_t ledbit[INPUT_DEVICE_ID_LED_MAX / BITS_PER_LONG + 1];
+	kernel_ulong_t sndbit[INPUT_DEVICE_ID_SND_MAX / BITS_PER_LONG + 1];
+	kernel_ulong_t ffbit[INPUT_DEVICE_ID_FF_MAX / BITS_PER_LONG + 1];
+	kernel_ulong_t swbit[INPUT_DEVICE_ID_SW_MAX / BITS_PER_LONG + 1];
+
+	kernel_ulong_t driver_info;
+};
+
 #endif /* LINUX_MOD_DEVICETABLE_H */
diff --git a/include/linux/mv643xx.h b/include/linux/mv643xx.h
index 955d3069d727..edfa012fad3a 100644
--- a/include/linux/mv643xx.h
+++ b/include/linux/mv643xx.h
@@ -13,7 +13,7 @@
 #ifndef __ASM_MV643XX_H
 #define __ASM_MV643XX_H
 
-#ifdef __MIPS__
+#ifdef __mips__
 #include <asm/addrspace.h>
 #include <asm/marvell.h>
 #endif
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index 40ccf8cc4239..f4169bbb60eb 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -433,8 +433,7 @@ struct net_device
 
 	/* register/unregister state machine */
 	enum { NETREG_UNINITIALIZED=0,
-	       NETREG_REGISTERING,	/* called register_netdevice */
-	       NETREG_REGISTERED,	/* completed register todo */
+	       NETREG_REGISTERED,	/* completed register_netdevice */
 	       NETREG_UNREGISTERING,	/* called unregister_netdevice */
 	       NETREG_UNREGISTERED,	/* completed unregister todo */
 	       NETREG_RELEASED,		/* called free_netdev */
@@ -506,6 +505,8 @@ struct net_device
 
 	/* class/net/name entry */
 	struct class_device	class_dev;
+	/* space for optional statistics and wireless sysfs groups */
+	struct attribute_group  *sysfs_groups[3];
 };
 
 #define	NETDEV_ALIGN		32
diff --git a/include/linux/netfilter/x_tables.h b/include/linux/netfilter/x_tables.h
index f6bdef82a322..48cc32d83f77 100644
--- a/include/linux/netfilter/x_tables.h
+++ b/include/linux/netfilter/x_tables.h
@@ -337,6 +337,10 @@ struct compat_xt_entry_match
 			char name[XT_FUNCTION_MAXNAMELEN - 1];
 			u_int8_t revision;
 		} user;
+		struct {
+			u_int16_t match_size;
+			compat_uptr_t match;
+		} kernel;
 		u_int16_t match_size;
 	} u;
 	unsigned char data[0];
@@ -350,6 +354,10 @@ struct compat_xt_entry_target
 			char name[XT_FUNCTION_MAXNAMELEN - 1];
 			u_int8_t revision;
 		} user;
+		struct {
+			u_int16_t target_size;
+			compat_uptr_t target;
+		} kernel;
 		u_int16_t target_size;
 	} u;
 	unsigned char data[0];
@@ -361,7 +369,11 @@ struct compat_xt_entry_target
 
 struct compat_xt_counters
 {
+#if defined(CONFIG_X86_64) || defined(CONFIG_IA64)
 	u_int32_t cnt[4];
+#else
+	u_int64_t cnt[2];
+#endif
 };
 
 struct compat_xt_counters_info
diff --git a/include/linux/netfilter_ipv4/ip_conntrack_helper_h323_asn1.h b/include/linux/netfilter_ipv4/ip_conntrack_helper_h323_asn1.h
index 0bd828081c0c..c6e9a0b6d30b 100644
--- a/include/linux/netfilter_ipv4/ip_conntrack_helper_h323_asn1.h
+++ b/include/linux/netfilter_ipv4/ip_conntrack_helper_h323_asn1.h
@@ -2,7 +2,7 @@
  * ip_conntrack_helper_h323_asn1.h - BER and PER decoding library for H.323
  * 			      	     conntrack/NAT module.
  *
- * Copyright (c) 2006 by Jing Min Zhao <zhaojingmin@hotmail.com>
+ * Copyright (c) 2006 by Jing Min Zhao <zhaojingmin@users.sourceforge.net>
  *
  * This source code is licensed under General Public License version 2.
  *
diff --git a/include/linux/netlink.h b/include/linux/netlink.h
index f8f3d1c927f8..87b8a5703ebc 100644
--- a/include/linux/netlink.h
+++ b/include/linux/netlink.h
@@ -143,6 +143,7 @@ struct netlink_skb_parms
 	__u32			dst_group;
 	kernel_cap_t		eff_cap;
 	__u32			loginuid;	/* Login (audit) uid */
+	__u32			sid;		/* SELinux security id */
 };
 
 #define NETLINK_CB(skb)		(*(struct netlink_skb_parms*)&((skb)->cb))
diff --git a/include/linux/pagemap.h b/include/linux/pagemap.h
index 9539efd4f7e6..7a1af574dedf 100644
--- a/include/linux/pagemap.h
+++ b/include/linux/pagemap.h
@@ -78,6 +78,8 @@ extern struct page * find_or_create_page(struct address_space *mapping,
 				unsigned long index, gfp_t gfp_mask);
 unsigned find_get_pages(struct address_space *mapping, pgoff_t start,
 			unsigned int nr_pages, struct page **pages);
+unsigned find_get_pages_contig(struct address_space *mapping, pgoff_t start,
+			       unsigned int nr_pages, struct page **pages);
 unsigned find_get_pages_tag(struct address_space *mapping, pgoff_t *index,
 			int tag, unsigned int nr_pages, struct page **pages);
 
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 0aad5a378e95..3a6a4e37a482 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -97,7 +97,13 @@ enum pci_channel_state {
 
 typedef unsigned short __bitwise pci_bus_flags_t;
 enum pci_bus_flags {
-	PCI_BUS_FLAGS_NO_MSI = (pci_bus_flags_t) 1,
+	PCI_BUS_FLAGS_NO_MSI = (__force pci_bus_flags_t) 1,
+};
+
+struct pci_cap_saved_state {
+	struct hlist_node next;
+	char cap_nr;
+	u32 data[0];
 };
 
 /*
@@ -159,6 +165,7 @@ struct pci_dev {
 	unsigned int	block_ucfg_access:1;	/* userspace config space access is blocked */
 
 	u32		saved_config_space[16]; /* config space saved at suspend time */
+	struct hlist_head saved_cap_space;
 	struct bin_attribute *rom_attr; /* attribute descriptor for sysfs ROM entry */
 	int rom_attr_enabled;		/* has display of the rom attribute been enabled? */
 	struct bin_attribute *res_attr[DEVICE_COUNT_RESOURCE]; /* sysfs file for resources */
@@ -169,6 +176,30 @@ struct pci_dev {
 #define	to_pci_dev(n) container_of(n, struct pci_dev, dev)
 #define for_each_pci_dev(d) while ((d = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, d)) != NULL)
 
+static inline struct pci_cap_saved_state *pci_find_saved_cap(
+	struct pci_dev *pci_dev,char cap)
+{
+	struct pci_cap_saved_state *tmp;
+	struct hlist_node *pos;
+
+	hlist_for_each_entry(tmp, pos, &pci_dev->saved_cap_space, next) {
+		if (tmp->cap_nr == cap)
+			return tmp;
+	}
+	return NULL;
+}
+
+static inline void pci_add_saved_cap(struct pci_dev *pci_dev,
+	struct pci_cap_saved_state *new_cap)
+{
+	hlist_add_head(&new_cap->next, &pci_dev->saved_cap_space);
+}
+
+static inline void pci_remove_saved_cap(struct pci_cap_saved_state *cap)
+{
+	hlist_del(&cap->next);
+}
+
 /*
  *  For PCI devices, the region numbers are assigned this way:
  *
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 870fe38378b1..590dc6dca315 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -356,6 +356,10 @@
 #define PCI_DEVICE_ID_ATI_IXP300_SATA   0x436e
 #define PCI_DEVICE_ID_ATI_IXP400_IDE	0x4376
 #define PCI_DEVICE_ID_ATI_IXP400_SATA   0x4379
+#define PCI_DEVICE_ID_ATI_IXP400_SATA2	0x437a
+#define PCI_DEVICE_ID_ATI_IXP600_SATA	0x4380
+#define PCI_DEVICE_ID_ATI_IXP600_SRAID	0x4381
+#define PCI_DEVICE_ID_ATI_IXP600_IDE	0x438c
 
 #define PCI_VENDOR_ID_VLSI		0x1004
 #define PCI_DEVICE_ID_VLSI_82C592	0x0005
@@ -497,7 +501,8 @@
 #define PCI_DEVICE_ID_AMD_8111_SMBUS	0x746b
 #define PCI_DEVICE_ID_AMD_8111_AUDIO	0x746d
 #define PCI_DEVICE_ID_AMD_8151_0	0x7454
-#define PCI_DEVICE_ID_AMD_8131_APIC     0x7450
+#define PCI_DEVICE_ID_AMD_8131_BRIDGE	0x7450
+#define PCI_DEVICE_ID_AMD_8131_APIC	0x7451
 #define PCI_DEVICE_ID_AMD_CS5536_ISA    0x2090
 #define PCI_DEVICE_ID_AMD_CS5536_FLASH  0x2091
 #define PCI_DEVICE_ID_AMD_CS5536_AUDIO  0x2093
@@ -1226,6 +1231,7 @@
 #define PCI_DEVICE_ID_VIA_8380_0	0x0204
 #define PCI_DEVICE_ID_VIA_3238_0	0x0238
 #define PCI_DEVICE_ID_VIA_PT880		0x0258
+#define PCI_DEVICE_ID_VIA_PT880ULTRA	0x0308
 #define PCI_DEVICE_ID_VIA_PX8X0_0	0x0259
 #define PCI_DEVICE_ID_VIA_3269_0	0x0269
 #define PCI_DEVICE_ID_VIA_K8T800PRO_0	0x0282
diff --git a/include/linux/pipe_fs_i.h b/include/linux/pipe_fs_i.h
index 123a7c24bc72..ea4f7cd7bfd8 100644
--- a/include/linux/pipe_fs_i.h
+++ b/include/linux/pipe_fs_i.h
@@ -5,8 +5,9 @@
 
 #define PIPE_BUFFERS (16)
 
-#define PIPE_BUF_FLAG_STOLEN	0x01
-#define PIPE_BUF_FLAG_LRU	0x02
+#define PIPE_BUF_FLAG_LRU	0x01	/* page is on the LRU */
+#define PIPE_BUF_FLAG_ATOMIC	0x02	/* was atomically mapped */
+#define PIPE_BUF_FLAG_GIFT	0x04	/* page is a gift */
 
 struct pipe_buffer {
 	struct page *page;
@@ -15,12 +16,26 @@ struct pipe_buffer {
 	unsigned int flags;
 };
 
+/*
+ * Note on the nesting of these functions:
+ *
+ * ->pin()
+ *	->steal()
+ *	...
+ *	->map()
+ *	...
+ *	->unmap()
+ *
+ * That is, ->map() must be called on a pinned buffer, same goes for ->steal().
+ */
 struct pipe_buf_operations {
 	int can_merge;
-	void * (*map)(struct file *, struct pipe_inode_info *, struct pipe_buffer *);
-	void (*unmap)(struct pipe_inode_info *, struct pipe_buffer *);
+	void * (*map)(struct pipe_inode_info *, struct pipe_buffer *, int);
+	void (*unmap)(struct pipe_inode_info *, struct pipe_buffer *, void *);
+	int (*pin)(struct pipe_inode_info *, struct pipe_buffer *);
 	void (*release)(struct pipe_inode_info *, struct pipe_buffer *);
 	int (*steal)(struct pipe_inode_info *, struct pipe_buffer *);
+	void (*get)(struct pipe_inode_info *, struct pipe_buffer *);
 };
 
 struct pipe_inode_info {
@@ -50,6 +65,13 @@ struct pipe_inode_info * alloc_pipe_info(struct inode * inode);
 void free_pipe_info(struct inode * inode);
 void __free_pipe_info(struct pipe_inode_info *);
 
+/* Generic pipe buffer ops functions */
+void *generic_pipe_buf_map(struct pipe_inode_info *, struct pipe_buffer *, int);
+void generic_pipe_buf_unmap(struct pipe_inode_info *, struct pipe_buffer *, void *);
+void generic_pipe_buf_get(struct pipe_inode_info *, struct pipe_buffer *);
+int generic_pipe_buf_pin(struct pipe_inode_info *, struct pipe_buffer *);
+int generic_pipe_buf_steal(struct pipe_inode_info *, struct pipe_buffer *);
+
 /*
  * splice is tied to pipes as a transport (at least for now), so we'll just
  * add the splice flags here.
@@ -59,5 +81,23 @@ void __free_pipe_info(struct pipe_inode_info *);
 				 /* we may still block on the fd we splice */
 				 /* from/to, of course */
 #define SPLICE_F_MORE	(0x04)	/* expect more data */
+#define SPLICE_F_GIFT	(0x08)	/* pages passed in are a gift */
+
+/*
+ * Passed to the actors
+ */
+struct splice_desc {
+	unsigned int len, total_len;	/* current and remaining length */
+	unsigned int flags;		/* splice flags */
+	struct file *file;		/* file to read/write */
+	loff_t pos;			/* file position */
+};
+
+typedef int (splice_actor)(struct pipe_inode_info *, struct pipe_buffer *,
+			   struct splice_desc *);
+
+extern ssize_t splice_from_pipe(struct pipe_inode_info *, struct file *,
+				loff_t *, size_t, unsigned int,
+				splice_actor *);
 
 #endif
diff --git a/include/linux/pm.h b/include/linux/pm.h
index 6df2585c0169..66be58902b17 100644
--- a/include/linux/pm.h
+++ b/include/linux/pm.h
@@ -199,6 +199,12 @@ extern int device_suspend(pm_message_t state);
 
 extern int dpm_runtime_suspend(struct device *, pm_message_t);
 extern void dpm_runtime_resume(struct device *);
+extern void __suspend_report_result(const char *function, void *fn, int ret);
+
+#define suspend_report_result(fn, ret)					\
+	do {								\
+		__suspend_report_result(__FUNCTION__, fn, ret);		\
+	} while (0)
 
 #else /* !CONFIG_PM */
 
@@ -219,6 +225,8 @@ static inline void dpm_runtime_resume(struct device * dev)
 {
 }
 
+#define suspend_report_result(fn, ret) do { } while (0)
+
 #endif
 
 /* changes to device_may_wakeup take effect on the next pm state change.
diff --git a/include/linux/pm_legacy.h b/include/linux/pm_legacy.h
index 1252b45face1..008932d73c35 100644
--- a/include/linux/pm_legacy.h
+++ b/include/linux/pm_legacy.h
@@ -16,11 +16,6 @@ struct pm_dev __deprecated *
 pm_register(pm_dev_t type, unsigned long id, pm_callback callback);
 
 /*
- * Unregister a device with power management
- */
-void __deprecated pm_unregister(struct pm_dev *dev);
-
-/*
  * Unregister all devices with matching callback
  */
 void __deprecated pm_unregister_all(pm_callback callback);
@@ -41,8 +36,6 @@ static inline struct pm_dev *pm_register(pm_dev_t type,
 	return NULL;
 }
 
-static inline void pm_unregister(struct pm_dev *dev) {}
-
 static inline void pm_unregister_all(pm_callback callback) {}
 
 static inline int pm_send_all(pm_request_t rqst, void *data)
diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h
index 5673008b61e1..970284f571a6 100644
--- a/include/linux/rcupdate.h
+++ b/include/linux/rcupdate.h
@@ -132,6 +132,7 @@ static inline void rcu_bh_qsctr_inc(int cpu)
 }
 
 extern int rcu_pending(int cpu);
+extern int rcu_needs_cpu(int cpu);
 
 /**
  * rcu_read_lock - mark the beginning of an RCU read-side critical section.
diff --git a/include/linux/sched.h b/include/linux/sched.h
index e3539c14e47e..29b7d4f87d20 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -911,7 +911,6 @@ static inline int pid_alive(struct task_struct *p)
 extern void free_task(struct task_struct *tsk);
 #define get_task_struct(tsk) do { atomic_inc(&(tsk)->usage); } while(0)
 
-extern void __put_task_struct_cb(struct rcu_head *rhp);
 extern void __put_task_struct(struct task_struct *t);
 
 static inline void put_task_struct(struct task_struct *t)
@@ -1193,8 +1192,7 @@ extern void wait_task_inactive(task_t * p);
 #define remove_parent(p)	list_del_init(&(p)->sibling)
 #define add_parent(p)		list_add_tail(&(p)->sibling,&(p)->parent->children)
 
-#define next_task(p)	list_entry((p)->tasks.next, struct task_struct, tasks)
-#define prev_task(p)	list_entry((p)->tasks.prev, struct task_struct, tasks)
+#define next_task(p)	list_entry(rcu_dereference((p)->tasks.next), struct task_struct, tasks)
 
 #define for_each_process(p) \
 	for (p = &init_task ; (p = next_task(p)) != &init_task ; )
diff --git a/include/linux/security.h b/include/linux/security.h
index aaa0a5cdbf75..1bab48f6aeac 100644
--- a/include/linux/security.h
+++ b/include/linux/security.h
@@ -869,11 +869,6 @@ struct swap_info_struct;
  *	@ipcp contains the kernel IPC permission structure
  *	@flag contains the desired (requested) permission set
  *	Return 0 if permission is granted.
- * @ipc_getsecurity:
- *      Copy the security label associated with the ipc object into
- *      @buffer.  @buffer may be NULL to request the size of the buffer 
- *      required.  @size indicates the size of @buffer in bytes. Return 
- *      number of bytes used/required on success.
  *
  * Security hooks for individual messages held in System V IPC message queues
  * @msg_msg_alloc_security:
@@ -1223,7 +1218,6 @@ struct security_operations {
 	void (*task_to_inode)(struct task_struct *p, struct inode *inode);
 
 	int (*ipc_permission) (struct kern_ipc_perm * ipcp, short flag);
-	int (*ipc_getsecurity)(struct kern_ipc_perm *ipcp, void *buffer, size_t size);
 
 	int (*msg_msg_alloc_security) (struct msg_msg * msg);
 	void (*msg_msg_free_security) (struct msg_msg * msg);
@@ -1887,11 +1881,6 @@ static inline int security_ipc_permission (struct kern_ipc_perm *ipcp,
 	return security_ops->ipc_permission (ipcp, flag);
 }
 
-static inline int security_ipc_getsecurity(struct kern_ipc_perm *ipcp, void *buffer, size_t size)
-{
-	return security_ops->ipc_getsecurity(ipcp, buffer, size);
-}
-
 static inline int security_msg_msg_alloc (struct msg_msg * msg)
 {
 	return security_ops->msg_msg_alloc_security (msg);
@@ -2532,11 +2521,6 @@ static inline int security_ipc_permission (struct kern_ipc_perm *ipcp,
 	return 0;
 }
 
-static inline int security_ipc_getsecurity(struct kern_ipc_perm *ipcp, void *buffer, size_t size)
-{
-	return -EOPNOTSUPP;
-}
-
 static inline int security_msg_msg_alloc (struct msg_msg * msg)
 {
 	return 0;
diff --git a/include/linux/selinux.h b/include/linux/selinux.h
new file mode 100644
index 000000000000..4047bcde4484
--- /dev/null
+++ b/include/linux/selinux.h
@@ -0,0 +1,177 @@
+/*
+ * SELinux services exported to the rest of the kernel.
+ *
+ * Author: James Morris <jmorris@redhat.com>
+ *
+ * Copyright (C) 2005 Red Hat, Inc., James Morris <jmorris@redhat.com>
+ * Copyright (C) 2006 Trusted Computer Solutions, Inc. <dgoeddel@trustedcs.com>
+ * Copyright (C) 2006 IBM Corporation, Timothy R. Chavez <tinytim@us.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2,
+ * as published by the Free Software Foundation.
+ */
+#ifndef _LINUX_SELINUX_H
+#define _LINUX_SELINUX_H
+
+struct selinux_audit_rule;
+struct audit_context;
+struct inode;
+struct kern_ipc_perm;
+
+#ifdef CONFIG_SECURITY_SELINUX
+
+/**
+ *	selinux_audit_rule_init - alloc/init an selinux audit rule structure.
+ *	@field: the field this rule refers to
+ *	@op: the operater the rule uses
+ *	@rulestr: the text "target" of the rule
+ *	@rule: pointer to the new rule structure returned via this
+ *
+ *	Returns 0 if successful, -errno if not.  On success, the rule structure
+ *	will be allocated internally.  The caller must free this structure with
+ *	selinux_audit_rule_free() after use.
+ */
+int selinux_audit_rule_init(u32 field, u32 op, char *rulestr,
+                            struct selinux_audit_rule **rule);
+
+/**
+ *	selinux_audit_rule_free - free an selinux audit rule structure.
+ *	@rule: pointer to the audit rule to be freed
+ *
+ *	This will free all memory associated with the given rule.
+ *	If @rule is NULL, no operation is performed.
+ */
+void selinux_audit_rule_free(struct selinux_audit_rule *rule);
+
+/**
+ *	selinux_audit_rule_match - determine if a context ID matches a rule.
+ *	@ctxid: the context ID to check
+ *	@field: the field this rule refers to
+ *	@op: the operater the rule uses
+ *	@rule: pointer to the audit rule to check against
+ *	@actx: the audit context (can be NULL) associated with the check
+ *
+ *	Returns 1 if the context id matches the rule, 0 if it does not, and
+ *	-errno on failure.
+ */
+int selinux_audit_rule_match(u32 ctxid, u32 field, u32 op,
+                             struct selinux_audit_rule *rule,
+                             struct audit_context *actx);
+
+/**
+ *	selinux_audit_set_callback - set the callback for policy reloads.
+ *	@callback: the function to call when the policy is reloaded
+ *
+ *	This sets the function callback function that will update the rules
+ *	upon policy reloads.  This callback should rebuild all existing rules
+ *	using selinux_audit_rule_init().
+ */
+void selinux_audit_set_callback(int (*callback)(void));
+
+/**
+ *	selinux_task_ctxid - determine a context ID for a process.
+ *	@tsk: the task object
+ *	@ctxid: ID value returned via this
+ *
+ *	On return, ctxid will contain an ID for the context.  This value
+ *	should only be used opaquely.
+ */
+void selinux_task_ctxid(struct task_struct *tsk, u32 *ctxid);
+
+/**
+ *     selinux_ctxid_to_string - map a security context ID to a string
+ *     @ctxid: security context ID to be converted.
+ *     @ctx: address of context string to be returned
+ *     @ctxlen: length of returned context string.
+ *
+ *     Returns 0 if successful, -errno if not.  On success, the context
+ *     string will be allocated internally, and the caller must call
+ *     kfree() on it after use.
+ */
+int selinux_ctxid_to_string(u32 ctxid, char **ctx, u32 *ctxlen);
+
+/**
+ *     selinux_get_inode_sid - get the inode's security context ID
+ *     @inode: inode structure to get the sid from.
+ *     @sid: pointer to security context ID to be filled in.
+ *
+ *     Returns nothing
+ */
+void selinux_get_inode_sid(const struct inode *inode, u32 *sid);
+
+/**
+ *     selinux_get_ipc_sid - get the ipc security context ID
+ *     @ipcp: ipc structure to get the sid from.
+ *     @sid: pointer to security context ID to be filled in.
+ *
+ *     Returns nothing
+ */
+void selinux_get_ipc_sid(const struct kern_ipc_perm *ipcp, u32 *sid);
+
+/**
+ *     selinux_get_task_sid - return the SID of task
+ *     @tsk: the task whose SID will be returned
+ *     @sid: pointer to security context ID to be filled in.
+ *
+ *     Returns nothing
+ */
+void selinux_get_task_sid(struct task_struct *tsk, u32 *sid);
+
+
+#else
+
+static inline int selinux_audit_rule_init(u32 field, u32 op,
+                                          char *rulestr,
+                                          struct selinux_audit_rule **rule)
+{
+	return -ENOTSUPP;
+}
+
+static inline void selinux_audit_rule_free(struct selinux_audit_rule *rule)
+{
+	return;
+}
+
+static inline int selinux_audit_rule_match(u32 ctxid, u32 field, u32 op,
+                                           struct selinux_audit_rule *rule,
+                                           struct audit_context *actx)
+{
+	return 0;
+}
+
+static inline void selinux_audit_set_callback(int (*callback)(void))
+{
+	return;
+}
+
+static inline void selinux_task_ctxid(struct task_struct *tsk, u32 *ctxid)
+{
+	*ctxid = 0;
+}
+
+static inline int selinux_ctxid_to_string(u32 ctxid, char **ctx, u32 *ctxlen)
+{
+       *ctx = NULL;
+       *ctxlen = 0;
+       return 0;
+}
+
+static inline void selinux_get_inode_sid(const struct inode *inode, u32 *sid)
+{
+	*sid = 0;
+}
+
+static inline void selinux_get_ipc_sid(const struct kern_ipc_perm *ipcp, u32 *sid)
+{
+	*sid = 0;
+}
+
+static inline void selinux_get_task_sid(struct task_struct *tsk, u32 *sid)
+{
+	*sid = 0;
+}
+
+#endif	/* CONFIG_SECURITY_SELINUX */
+
+#endif /* _LINUX_SELINUX_H */
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index c32e60e79dea..bd14858121ea 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -254,6 +254,7 @@ struct uart_port {
 #define UPF_CONS_FLOW		((__force upf_t) (1 << 23))
 #define UPF_SHARE_IRQ		((__force upf_t) (1 << 24))
 #define UPF_BOOT_AUTOCONF	((__force upf_t) (1 << 28))
+#define UPF_DEAD		((__force upf_t) (1 << 30))
 #define UPF_IOREMAP		((__force upf_t) (1 << 31))
 
 #define UPF_CHANGE_MASK		((__force upf_t) (0x17fff))
diff --git a/include/linux/signal.h b/include/linux/signal.h
index 162a8fd10b29..70739f51a09f 100644
--- a/include/linux/signal.h
+++ b/include/linux/signal.h
@@ -14,10 +14,12 @@
  *
  * SA_INTERRUPT is also used by the irq handling routines.
  * SA_SHIRQ is for shared interrupt support on PCI and EISA.
+ * SA_PROBEIRQ is set by callers when they expect sharing mismatches to occur
  */
-#define SA_PROBE		SA_ONESHOT
 #define SA_SAMPLE_RANDOM	SA_RESTART
 #define SA_SHIRQ		0x04000000
+#define SA_PROBEIRQ		0x08000000
+
 /*
  * As above, these correspond to the IORESOURCE_IRQ_* defines in
  * linux/ioport.h to select the interrupt line behaviour.  When
diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
index c4619a428d9b..f8f234708b98 100644
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -344,6 +344,13 @@ extern void	      skb_over_panic(struct sk_buff *skb, int len,
 				     void *here);
 extern void	      skb_under_panic(struct sk_buff *skb, int len,
 				      void *here);
+extern void	      skb_truesize_bug(struct sk_buff *skb);
+
+static inline void skb_truesize_check(struct sk_buff *skb)
+{
+	if (unlikely((int)skb->truesize < sizeof(struct sk_buff) + skb->len))
+		skb_truesize_bug(skb);
+}
 
 extern int skb_append_datato_frags(struct sock *sk, struct sk_buff *skb,
 			int getfrag(void *from, char *to, int offset,
diff --git a/include/linux/slab.h b/include/linux/slab.h
index 3af03b19c983..2d985d59c7b8 100644
--- a/include/linux/slab.h
+++ b/include/linux/slab.h
@@ -150,6 +150,7 @@ static inline void *kcalloc(size_t n, size_t size, gfp_t flags)
 
 extern void kfree(const void *);
 extern unsigned int ksize(const void *);
+extern int slab_is_available(void);
 
 #ifdef CONFIG_NUMA
 extern void *kmem_cache_alloc_node(kmem_cache_t *, gfp_t flags, int node);
diff --git a/include/linux/spi/ads7846.h b/include/linux/spi/ads7846.h
index 72261e0f2ac1..adb3dafd33e9 100644
--- a/include/linux/spi/ads7846.h
+++ b/include/linux/spi/ads7846.h
@@ -14,5 +14,12 @@ struct ads7846_platform_data {
 	u16	x_min, x_max;
 	u16	y_min, y_max;
 	u16	pressure_min, pressure_max;
+
+	u16	debounce_max;		/* max number of additional readings
+					 * per sample */
+	u16	debounce_tol;		/* tolerance used for filtering */
+	u16	debounce_rep;		/* additional consecutive good readings
+					 * required after the first two */
+	int	(*get_pendown_state)(void);
 };
 
diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
index b05f1463a267..e928c0dcc297 100644
--- a/include/linux/spi/spi.h
+++ b/include/linux/spi/spi.h
@@ -31,18 +31,23 @@ extern struct bus_type spi_bus_type;
  * @master: SPI controller used with the device.
  * @max_speed_hz: Maximum clock rate to be used with this chip
  *	(on this board); may be changed by the device's driver.
+ *	The spi_transfer.speed_hz can override this for each transfer.
  * @chip-select: Chipselect, distinguishing chips handled by "master".
  * @mode: The spi mode defines how data is clocked out and in.
  *	This may be changed by the device's driver.
+ *	The "active low" default for chipselect mode can be overridden,
+ *	as can the "MSB first" default for each word in a transfer.
  * @bits_per_word: Data transfers involve one or more words; word sizes
- * 	like eight or 12 bits are common.  In-memory wordsizes are
+ *	like eight or 12 bits are common.  In-memory wordsizes are
  *	powers of two bytes (e.g. 20 bit samples use 32 bits).
- *	This may be changed by the device's driver.
+ *	This may be changed by the device's driver, or left at the
+ *	default (0) indicating protocol words are eight bit bytes.
+ *	The spi_transfer.bits_per_word can override this for each transfer.
  * @irq: Negative, or the number passed to request_irq() to receive
- * 	interrupts from this device.
+ *	interrupts from this device.
  * @controller_state: Controller's runtime state
  * @controller_data: Board-specific definitions for controller, such as
- * 	FIFO initialization parameters; from board_info.controller_data
+ *	FIFO initialization parameters; from board_info.controller_data
  *
  * An spi_device is used to interchange data between an SPI slave
  * (usually a discrete chip) and CPU memory.
@@ -65,6 +70,7 @@ struct spi_device {
 #define	SPI_MODE_2	(SPI_CPOL|0)
 #define	SPI_MODE_3	(SPI_CPOL|SPI_CPHA)
 #define	SPI_CS_HIGH	0x04			/* chipselect active high? */
+#define	SPI_LSB_FIRST	0x08			/* per-word bits-on-wire */
 	u8			bits_per_word;
 	int			irq;
 	void			*controller_state;
@@ -73,7 +79,6 @@ struct spi_device {
 
 	// likely need more hooks for more protocol options affecting how
 	// the controller talks to each chip, like:
-	//  - bit order (default is wordwise msb-first)
 	//  - memory packing (12 bit samples into low bits, others zeroed)
 	//  - priority
 	//  - drop chipselect after each word
@@ -143,13 +148,13 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv)
  * struct spi_master - interface to SPI master controller
  * @cdev: class interface to this driver
  * @bus_num: board-specific (and often SOC-specific) identifier for a
- * 	given SPI controller.
+ *	given SPI controller.
  * @num_chipselect: chipselects are used to distinguish individual
- * 	SPI slaves, and are numbered from zero to num_chipselects.
- * 	each slave has a chipselect signal, but it's common that not
- * 	every chipselect is connected to a slave.
+ *	SPI slaves, and are numbered from zero to num_chipselects.
+ *	each slave has a chipselect signal, but it's common that not
+ *	every chipselect is connected to a slave.
  * @setup: updates the device mode and clocking records used by a
- * 	device's SPI controller; protocol code may call this.
+ *	device's SPI controller; protocol code may call this.
  * @transfer: adds a message to the controller's transfer queue.
  * @cleanup: frees controller-specific state
  *
@@ -167,13 +172,13 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv)
 struct spi_master {
 	struct class_device	cdev;
 
-	/* other than zero (== assign one dynamically), bus_num is fully
+	/* other than negative (== assign one dynamically), bus_num is fully
 	 * board-specific.  usually that simplifies to being SOC-specific.
-	 * example:  one SOC has three SPI controllers, numbered 1..3,
+	 * example:  one SOC has three SPI controllers, numbered 0..2,
 	 * and one board's schematics might show it using SPI-2.  software
 	 * would normally use bus_num=2 for that controller.
 	 */
-	u16			bus_num;
+	s16			bus_num;
 
 	/* chipselects will be integral to many controllers; some others
 	 * might use board-specific GPIOs.
@@ -268,10 +273,14 @@ extern struct spi_master *spi_busnum_to_master(u16 busnum);
  * @tx_dma: DMA address of tx_buf, if spi_message.is_dma_mapped
  * @rx_dma: DMA address of rx_buf, if spi_message.is_dma_mapped
  * @len: size of rx and tx buffers (in bytes)
+ * @speed_hz: Select a speed other then the device default for this
+ *      transfer. If 0 the default (from spi_device) is used.
+ * @bits_per_word: select a bits_per_word other then the device default
+ *      for this transfer. If 0 the default (from spi_device) is used.
  * @cs_change: affects chipselect after this transfer completes
  * @delay_usecs: microseconds to delay after this transfer before
- * 	(optionally) changing the chipselect status, then starting
- * 	the next transfer or completing this spi_message.
+ *	(optionally) changing the chipselect status, then starting
+ *	the next transfer or completing this spi_message.
  * @transfer_list: transfers are sequenced through spi_message.transfers
  *
  * SPI transfers always write the same number of bytes as they read.
@@ -322,7 +331,9 @@ struct spi_transfer {
 	dma_addr_t	rx_dma;
 
 	unsigned	cs_change:1;
+	u8		bits_per_word;
 	u16		delay_usecs;
+	u32		speed_hz;
 
 	struct list_head transfer_list;
 };
@@ -356,7 +367,7 @@ struct spi_transfer {
  * and its transfers, ignore them until its completion callback.
  */
 struct spi_message {
-	struct list_head 	transfers;
+	struct list_head	transfers;
 
 	struct spi_device	*spi;
 
@@ -374,7 +385,7 @@ struct spi_message {
 	 */
 
 	/* completion is reported through a callback */
-	void 			(*complete)(void *context);
+	void			(*complete)(void *context);
 	void			*context;
 	unsigned		actual_length;
 	int			status;
diff --git a/include/linux/spi/spi_bitbang.h b/include/linux/spi/spi_bitbang.h
index c961fe9bf3eb..16ce178f54d7 100644
--- a/include/linux/spi/spi_bitbang.h
+++ b/include/linux/spi/spi_bitbang.h
@@ -30,6 +30,12 @@ struct spi_bitbang {
 
 	struct spi_master	*master;
 
+	/* setup_transfer() changes clock and/or wordsize to match settings
+	 * for this transfer; zeroes restore defaults from spi_device.
+	 */
+	int	(*setup_transfer)(struct spi_device *spi,
+			struct spi_transfer *t);
+
 	void	(*chipselect)(struct spi_device *spi, int is_on);
 #define	BITBANG_CS_ACTIVE	1	/* normally nCS, active low */
 #define	BITBANG_CS_INACTIVE	0
@@ -51,6 +57,8 @@ struct spi_bitbang {
 extern int spi_bitbang_setup(struct spi_device *spi);
 extern void spi_bitbang_cleanup(const struct spi_device *spi);
 extern int spi_bitbang_transfer(struct spi_device *spi, struct spi_message *m);
+extern int spi_bitbang_setup_transfer(struct spi_device *spi,
+				      struct spi_transfer *t);
 
 /* start or stop queue processing */
 extern int spi_bitbang_start(struct spi_bitbang *spi);
diff --git a/include/linux/sunrpc/metrics.h b/include/linux/sunrpc/metrics.h
index 8f96e9dc369a..77f78e56c481 100644
--- a/include/linux/sunrpc/metrics.h
+++ b/include/linux/sunrpc/metrics.h
@@ -69,9 +69,21 @@ struct rpc_clnt;
 /*
  * EXPORTed functions for managing rpc_iostats structures
  */
+
+#ifdef CONFIG_PROC_FS
+
 struct rpc_iostats *	rpc_alloc_iostats(struct rpc_clnt *);
 void			rpc_count_iostats(struct rpc_task *);
 void			rpc_print_iostats(struct seq_file *, struct rpc_clnt *);
 void			rpc_free_iostats(struct rpc_iostats *);
 
+#else  /*  CONFIG_PROC_FS  */
+
+static inline struct rpc_iostats *rpc_alloc_iostats(struct rpc_clnt *clnt) { return NULL; }
+static inline void rpc_count_iostats(struct rpc_task *task) {}
+static inline void rpc_print_iostats(struct seq_file *seq, struct rpc_clnt *clnt) {}
+static inline void rpc_free_iostats(struct rpc_iostats *stats) {}
+
+#endif  /*  CONFIG_PROC_FS  */
+
 #endif /* _LINUX_SUNRPC_METRICS_H */
diff --git a/include/linux/sunrpc/xprt.h b/include/linux/sunrpc/xprt.h
index 7eebbab7160b..e8bbe8118de8 100644
--- a/include/linux/sunrpc/xprt.h
+++ b/include/linux/sunrpc/xprt.h
@@ -53,6 +53,7 @@ struct rpc_timeout {
 
 struct rpc_task;
 struct rpc_xprt;
+struct seq_file;
 
 /*
  * This describes a complete RPC request
diff --git a/include/linux/swap.h b/include/linux/swap.h
index 5b1fdf1cff4f..f03c24719302 100644
--- a/include/linux/swap.h
+++ b/include/linux/swap.h
@@ -296,7 +296,7 @@ static inline void disable_swap_token(void)
 #define read_swap_cache_async(swp,vma,addr)	NULL
 #define lookup_swap_cache(swp)			NULL
 #define valid_swaphandles(swp, off)		0
-#define can_share_swap_page(p)			0
+#define can_share_swap_page(p)			(page_mapcount(p) == 1)
 #define move_to_swap_cache(p, swp)		1
 #define move_from_swap_cache(p, i, m)		1
 #define __delete_from_swap_cache(p)		/*NOTHING*/
diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h
index f001bad28d9a..60d49e5456e7 100644
--- a/include/linux/syscalls.h
+++ b/include/linux/syscalls.h
@@ -52,6 +52,7 @@ struct utimbuf;
 struct mq_attr;
 struct compat_stat;
 struct compat_timeval;
+struct robust_list_head;
 
 #include <linux/config.h>
 #include <linux/types.h>
@@ -574,7 +575,17 @@ asmlinkage long sys_splice(int fd_in, loff_t __user *off_in,
 			   int fd_out, loff_t __user *off_out,
 			   size_t len, unsigned int flags);
 
+asmlinkage long sys_vmsplice(int fd, const struct iovec __user *iov,
+			     unsigned long nr_segs, unsigned int flags);
+
+asmlinkage long sys_tee(int fdin, int fdout, size_t len, unsigned int flags);
+
 asmlinkage long sys_sync_file_range(int fd, loff_t offset, loff_t nbytes,
 					unsigned int flags);
+asmlinkage long sys_get_robust_list(int pid,
+				    struct robust_list_head __user **head_ptr,
+				    size_t __user *len_ptr);
+asmlinkage long sys_set_robust_list(struct robust_list_head __user *head,
+				    size_t len);
 
 #endif
diff --git a/include/linux/sysfs.h b/include/linux/sysfs.h
index 392da5a6dacb..1ea5d3cda6ae 100644
--- a/include/linux/sysfs.h
+++ b/include/linux/sysfs.h
@@ -74,6 +74,7 @@ struct sysfs_dirent {
 	umode_t			s_mode;
 	struct dentry		* s_dentry;
 	struct iattr		* s_iattr;
+	atomic_t		s_event;
 };
 
 #define SYSFS_ROOT		0x0001
@@ -117,6 +118,7 @@ int sysfs_remove_bin_file(struct kobject * kobj, struct bin_attribute * attr);
 
 int sysfs_create_group(struct kobject *, const struct attribute_group *);
 void sysfs_remove_group(struct kobject *, const struct attribute_group *);
+void sysfs_notify(struct kobject * k, char *dir, char *attr);
 
 #else /* CONFIG_SYSFS */
 
@@ -185,6 +187,10 @@ static inline void sysfs_remove_group(struct kobject * k, const struct attribute
 	;
 }
 
+static inline void sysfs_notify(struct kobject * k, char *dir, char *attr)
+{
+}
+
 #endif /* CONFIG_SYSFS */
 
 #endif /* _SYSFS_H_ */
diff --git a/include/linux/usb/net2280.h b/include/linux/usb/net2280.h
new file mode 100644
index 000000000000..c602f884f182
--- /dev/null
+++ b/include/linux/usb/net2280.h
@@ -0,0 +1,444 @@
+/*
+ * NetChip 2280 high/full speed USB device controller.
+ * Unlike many such controllers, this one talks PCI.
+ */
+#ifndef __LINUX_USB_NET2280_H
+#define __LINUX_USB_NET2280_H
+
+/*
+ * Copyright (C) 2002 NetChip Technology, Inc. (http://www.netchip.com)
+ * Copyright (C) 2003 David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+/*-------------------------------------------------------------------------*/
+
+/* NET2280 MEMORY MAPPED REGISTERS
+ *
+ * The register layout came from the chip documentation, and the bit
+ * number definitions were extracted from chip specification.
+ *
+ * Use the shift operator ('<<') to build bit masks, with readl/writel
+ * to access the registers through PCI.
+ */
+
+/* main registers, BAR0 + 0x0000 */
+struct net2280_regs {
+	// offset 0x0000
+	u32		devinit;
+#define     LOCAL_CLOCK_FREQUENCY                               8
+#define     FORCE_PCI_RESET                                     7
+#define     PCI_ID                                              6
+#define     PCI_ENABLE                                          5
+#define     FIFO_SOFT_RESET                                     4
+#define     CFG_SOFT_RESET                                      3
+#define     PCI_SOFT_RESET                                      2
+#define     USB_SOFT_RESET                                      1
+#define     M8051_RESET                                         0
+	u32		eectl;
+#define     EEPROM_ADDRESS_WIDTH                                23
+#define     EEPROM_CHIP_SELECT_ACTIVE                           22
+#define     EEPROM_PRESENT                                      21
+#define     EEPROM_VALID                                        20
+#define     EEPROM_BUSY                                         19
+#define     EEPROM_CHIP_SELECT_ENABLE                           18
+#define     EEPROM_BYTE_READ_START                              17
+#define     EEPROM_BYTE_WRITE_START                             16
+#define     EEPROM_READ_DATA                                    8
+#define     EEPROM_WRITE_DATA                                   0
+	u32		eeclkfreq;
+	u32		_unused0;
+	// offset 0x0010
+
+	u32		pciirqenb0;		/* interrupt PCI master ... */
+#define     SETUP_PACKET_INTERRUPT_ENABLE                       7
+#define     ENDPOINT_F_INTERRUPT_ENABLE                         6
+#define     ENDPOINT_E_INTERRUPT_ENABLE                         5
+#define     ENDPOINT_D_INTERRUPT_ENABLE                         4
+#define     ENDPOINT_C_INTERRUPT_ENABLE                         3
+#define     ENDPOINT_B_INTERRUPT_ENABLE                         2
+#define     ENDPOINT_A_INTERRUPT_ENABLE                         1
+#define     ENDPOINT_0_INTERRUPT_ENABLE                         0
+	u32		pciirqenb1;
+#define     PCI_INTERRUPT_ENABLE                                31
+#define     POWER_STATE_CHANGE_INTERRUPT_ENABLE                 27
+#define     PCI_ARBITER_TIMEOUT_INTERRUPT_ENABLE                26
+#define     PCI_PARITY_ERROR_INTERRUPT_ENABLE                   25
+#define     PCI_MASTER_ABORT_RECEIVED_INTERRUPT_ENABLE          20
+#define     PCI_TARGET_ABORT_RECEIVED_INTERRUPT_ENABLE          19
+#define     PCI_TARGET_ABORT_ASSERTED_INTERRUPT_ENABLE          18
+#define     PCI_RETRY_ABORT_INTERRUPT_ENABLE                    17
+#define     PCI_MASTER_CYCLE_DONE_INTERRUPT_ENABLE              16
+#define     GPIO_INTERRUPT_ENABLE                               13
+#define     DMA_D_INTERRUPT_ENABLE                              12
+#define     DMA_C_INTERRUPT_ENABLE                              11
+#define     DMA_B_INTERRUPT_ENABLE                              10
+#define     DMA_A_INTERRUPT_ENABLE                              9
+#define     EEPROM_DONE_INTERRUPT_ENABLE                        8
+#define     VBUS_INTERRUPT_ENABLE                               7
+#define     CONTROL_STATUS_INTERRUPT_ENABLE                     6
+#define     ROOT_PORT_RESET_INTERRUPT_ENABLE                    4
+#define     SUSPEND_REQUEST_INTERRUPT_ENABLE                    3
+#define     SUSPEND_REQUEST_CHANGE_INTERRUPT_ENABLE             2
+#define     RESUME_INTERRUPT_ENABLE                             1
+#define     SOF_INTERRUPT_ENABLE                                0
+	u32		cpu_irqenb0;		/* ... or onboard 8051 */
+#define     SETUP_PACKET_INTERRUPT_ENABLE                       7
+#define     ENDPOINT_F_INTERRUPT_ENABLE                         6
+#define     ENDPOINT_E_INTERRUPT_ENABLE                         5
+#define     ENDPOINT_D_INTERRUPT_ENABLE                         4
+#define     ENDPOINT_C_INTERRUPT_ENABLE                         3
+#define     ENDPOINT_B_INTERRUPT_ENABLE                         2
+#define     ENDPOINT_A_INTERRUPT_ENABLE                         1
+#define     ENDPOINT_0_INTERRUPT_ENABLE                         0
+	u32		cpu_irqenb1;
+#define     CPU_INTERRUPT_ENABLE                                31
+#define     POWER_STATE_CHANGE_INTERRUPT_ENABLE                 27
+#define     PCI_ARBITER_TIMEOUT_INTERRUPT_ENABLE                26
+#define     PCI_PARITY_ERROR_INTERRUPT_ENABLE                   25
+#define     PCI_INTA_INTERRUPT_ENABLE                           24
+#define     PCI_PME_INTERRUPT_ENABLE                            23
+#define     PCI_SERR_INTERRUPT_ENABLE                           22
+#define     PCI_PERR_INTERRUPT_ENABLE                           21
+#define     PCI_MASTER_ABORT_RECEIVED_INTERRUPT_ENABLE          20
+#define     PCI_TARGET_ABORT_RECEIVED_INTERRUPT_ENABLE          19
+#define     PCI_RETRY_ABORT_INTERRUPT_ENABLE                    17
+#define     PCI_MASTER_CYCLE_DONE_INTERRUPT_ENABLE              16
+#define     GPIO_INTERRUPT_ENABLE                               13
+#define     DMA_D_INTERRUPT_ENABLE                              12
+#define     DMA_C_INTERRUPT_ENABLE                              11
+#define     DMA_B_INTERRUPT_ENABLE                              10
+#define     DMA_A_INTERRUPT_ENABLE                              9
+#define     EEPROM_DONE_INTERRUPT_ENABLE                        8
+#define     VBUS_INTERRUPT_ENABLE                               7
+#define     CONTROL_STATUS_INTERRUPT_ENABLE                     6
+#define     ROOT_PORT_RESET_INTERRUPT_ENABLE                    4
+#define     SUSPEND_REQUEST_INTERRUPT_ENABLE                    3
+#define     SUSPEND_REQUEST_CHANGE_INTERRUPT_ENABLE             2
+#define     RESUME_INTERRUPT_ENABLE                             1
+#define     SOF_INTERRUPT_ENABLE                                0
+
+	// offset 0x0020
+	u32		_unused1;
+	u32		usbirqenb1;
+#define     USB_INTERRUPT_ENABLE                                31
+#define     POWER_STATE_CHANGE_INTERRUPT_ENABLE                 27
+#define     PCI_ARBITER_TIMEOUT_INTERRUPT_ENABLE                26
+#define     PCI_PARITY_ERROR_INTERRUPT_ENABLE                   25
+#define     PCI_INTA_INTERRUPT_ENABLE                           24
+#define     PCI_PME_INTERRUPT_ENABLE                            23
+#define     PCI_SERR_INTERRUPT_ENABLE                           22
+#define     PCI_PERR_INTERRUPT_ENABLE                           21
+#define     PCI_MASTER_ABORT_RECEIVED_INTERRUPT_ENABLE          20
+#define     PCI_TARGET_ABORT_RECEIVED_INTERRUPT_ENABLE          19
+#define     PCI_RETRY_ABORT_INTERRUPT_ENABLE                    17
+#define     PCI_MASTER_CYCLE_DONE_INTERRUPT_ENABLE              16
+#define     GPIO_INTERRUPT_ENABLE                               13
+#define     DMA_D_INTERRUPT_ENABLE                              12
+#define     DMA_C_INTERRUPT_ENABLE                              11
+#define     DMA_B_INTERRUPT_ENABLE                              10
+#define     DMA_A_INTERRUPT_ENABLE                              9
+#define     EEPROM_DONE_INTERRUPT_ENABLE                        8
+#define     VBUS_INTERRUPT_ENABLE                               7
+#define     CONTROL_STATUS_INTERRUPT_ENABLE                     6
+#define     ROOT_PORT_RESET_INTERRUPT_ENABLE                    4
+#define     SUSPEND_REQUEST_INTERRUPT_ENABLE                    3
+#define     SUSPEND_REQUEST_CHANGE_INTERRUPT_ENABLE             2
+#define     RESUME_INTERRUPT_ENABLE                             1
+#define     SOF_INTERRUPT_ENABLE                                0
+	u32		irqstat0;
+#define     INTA_ASSERTED                                       12
+#define     SETUP_PACKET_INTERRUPT                              7
+#define     ENDPOINT_F_INTERRUPT                                6
+#define     ENDPOINT_E_INTERRUPT                                5
+#define     ENDPOINT_D_INTERRUPT                                4
+#define     ENDPOINT_C_INTERRUPT                                3
+#define     ENDPOINT_B_INTERRUPT                                2
+#define     ENDPOINT_A_INTERRUPT                                1
+#define     ENDPOINT_0_INTERRUPT                                0
+	u32		irqstat1;
+#define     POWER_STATE_CHANGE_INTERRUPT                        27
+#define     PCI_ARBITER_TIMEOUT_INTERRUPT                       26
+#define     PCI_PARITY_ERROR_INTERRUPT                          25
+#define     PCI_INTA_INTERRUPT                                  24
+#define     PCI_PME_INTERRUPT                                   23
+#define     PCI_SERR_INTERRUPT                                  22
+#define     PCI_PERR_INTERRUPT                                  21
+#define     PCI_MASTER_ABORT_RECEIVED_INTERRUPT                 20
+#define     PCI_TARGET_ABORT_RECEIVED_INTERRUPT                 19
+#define     PCI_RETRY_ABORT_INTERRUPT                           17
+#define     PCI_MASTER_CYCLE_DONE_INTERRUPT                     16
+#define     SOF_DOWN_INTERRUPT                                  14
+#define     GPIO_INTERRUPT                                      13
+#define     DMA_D_INTERRUPT                                     12
+#define     DMA_C_INTERRUPT                                     11
+#define     DMA_B_INTERRUPT                                     10
+#define     DMA_A_INTERRUPT                                     9
+#define     EEPROM_DONE_INTERRUPT                               8
+#define     VBUS_INTERRUPT                                      7
+#define     CONTROL_STATUS_INTERRUPT                            6
+#define     ROOT_PORT_RESET_INTERRUPT                           4
+#define     SUSPEND_REQUEST_INTERRUPT                           3
+#define     SUSPEND_REQUEST_CHANGE_INTERRUPT                    2
+#define     RESUME_INTERRUPT                                    1
+#define     SOF_INTERRUPT                                       0
+	// offset 0x0030
+	u32		idxaddr;
+	u32		idxdata;
+	u32		fifoctl;
+#define     PCI_BASE2_RANGE                                     16
+#define     IGNORE_FIFO_AVAILABILITY                            3
+#define     PCI_BASE2_SELECT                                    2
+#define     FIFO_CONFIGURATION_SELECT                           0
+	u32		_unused2;
+	// offset 0x0040
+	u32		memaddr;
+#define     START                                               28
+#define     DIRECTION                                           27
+#define     FIFO_DIAGNOSTIC_SELECT                              24
+#define     MEMORY_ADDRESS                                      0
+	u32		memdata0;
+	u32		memdata1;
+	u32		_unused3;
+	// offset 0x0050
+	u32		gpioctl;
+#define     GPIO3_LED_SELECT                                    12
+#define     GPIO3_INTERRUPT_ENABLE                              11
+#define     GPIO2_INTERRUPT_ENABLE                              10
+#define     GPIO1_INTERRUPT_ENABLE                              9
+#define     GPIO0_INTERRUPT_ENABLE                              8
+#define     GPIO3_OUTPUT_ENABLE                                 7
+#define     GPIO2_OUTPUT_ENABLE                                 6
+#define     GPIO1_OUTPUT_ENABLE                                 5
+#define     GPIO0_OUTPUT_ENABLE                                 4
+#define     GPIO3_DATA                                          3
+#define     GPIO2_DATA                                          2
+#define     GPIO1_DATA                                          1
+#define     GPIO0_DATA                                          0
+	u32		gpiostat;
+#define     GPIO3_INTERRUPT                                     3
+#define     GPIO2_INTERRUPT                                     2
+#define     GPIO1_INTERRUPT                                     1
+#define     GPIO0_INTERRUPT                                     0
+} __attribute__ ((packed));
+
+/* usb control, BAR0 + 0x0080 */
+struct net2280_usb_regs {
+	// offset 0x0080
+	u32		stdrsp;
+#define     STALL_UNSUPPORTED_REQUESTS                          31
+#define     SET_TEST_MODE                                       16
+#define     GET_OTHER_SPEED_CONFIGURATION                       15
+#define     GET_DEVICE_QUALIFIER                                14
+#define     SET_ADDRESS                                         13
+#define     ENDPOINT_SET_CLEAR_HALT                             12
+#define     DEVICE_SET_CLEAR_DEVICE_REMOTE_WAKEUP               11
+#define     GET_STRING_DESCRIPTOR_2                             10
+#define     GET_STRING_DESCRIPTOR_1                             9
+#define     GET_STRING_DESCRIPTOR_0                             8
+#define     GET_SET_INTERFACE                                   6
+#define     GET_SET_CONFIGURATION                               5
+#define     GET_CONFIGURATION_DESCRIPTOR                        4
+#define     GET_DEVICE_DESCRIPTOR                               3
+#define     GET_ENDPOINT_STATUS                                 2
+#define     GET_INTERFACE_STATUS                                1
+#define     GET_DEVICE_STATUS                                   0
+	u32		prodvendid;
+#define     PRODUCT_ID                                          16
+#define     VENDOR_ID                                           0
+	u32		relnum;
+	u32		usbctl;
+#define     SERIAL_NUMBER_INDEX                                 16
+#define     PRODUCT_ID_STRING_ENABLE                            13
+#define     VENDOR_ID_STRING_ENABLE                             12
+#define     USB_ROOT_PORT_WAKEUP_ENABLE                         11
+#define     VBUS_PIN                                            10
+#define     TIMED_DISCONNECT                                    9
+#define     SUSPEND_IMMEDIATELY                                 7
+#define     SELF_POWERED_USB_DEVICE                             6
+#define     REMOTE_WAKEUP_SUPPORT                               5
+#define     PME_POLARITY                                        4
+#define     USB_DETECT_ENABLE                                   3
+#define     PME_WAKEUP_ENABLE                                   2
+#define     DEVICE_REMOTE_WAKEUP_ENABLE                         1
+#define     SELF_POWERED_STATUS                                 0
+	// offset 0x0090
+	u32		usbstat;
+#define     HIGH_SPEED                                          7
+#define     FULL_SPEED                                          6
+#define     GENERATE_RESUME                                     5
+#define     GENERATE_DEVICE_REMOTE_WAKEUP                       4
+	u32		xcvrdiag;
+#define     FORCE_HIGH_SPEED_MODE                               31
+#define     FORCE_FULL_SPEED_MODE                               30
+#define     USB_TEST_MODE                                       24
+#define     LINE_STATE                                          16
+#define     TRANSCEIVER_OPERATION_MODE                          2
+#define     TRANSCEIVER_SELECT                                  1
+#define     TERMINATION_SELECT                                  0
+	u32		setup0123;
+	u32		setup4567;
+	// offset 0x0090
+	u32		_unused0;
+	u32		ouraddr;
+#define     FORCE_IMMEDIATE                                     7
+#define     OUR_USB_ADDRESS                                     0
+	u32		ourconfig;
+} __attribute__ ((packed));
+
+/* pci control, BAR0 + 0x0100 */
+struct net2280_pci_regs {
+	// offset 0x0100
+	u32		 pcimstctl;
+#define     PCI_ARBITER_PARK_SELECT                             13
+#define     PCI_MULTI LEVEL_ARBITER                             12
+#define     PCI_RETRY_ABORT_ENABLE                              11
+#define     DMA_MEMORY_WRITE_AND_INVALIDATE_ENABLE              10
+#define     DMA_READ_MULTIPLE_ENABLE                            9
+#define     DMA_READ_LINE_ENABLE                                8
+#define     PCI_MASTER_COMMAND_SELECT                           6
+#define         MEM_READ_OR_WRITE                                   0
+#define         IO_READ_OR_WRITE                                    1
+#define         CFG_READ_OR_WRITE                                   2
+#define     PCI_MASTER_START                                    5
+#define     PCI_MASTER_READ_WRITE                               4
+#define         PCI_MASTER_WRITE                                    0
+#define         PCI_MASTER_READ                                     1
+#define     PCI_MASTER_BYTE_WRITE_ENABLES                       0
+	u32		 pcimstaddr;
+	u32		 pcimstdata;
+	u32		 pcimststat;
+#define     PCI_ARBITER_CLEAR                                   2
+#define     PCI_EXTERNAL_ARBITER                                1
+#define     PCI_HOST_MODE                                       0
+} __attribute__ ((packed));
+
+/* dma control, BAR0 + 0x0180 ... array of four structs like this,
+ * for channels 0..3.  see also struct net2280_dma:  descriptor
+ * that can be loaded into some of these registers.
+ */
+struct net2280_dma_regs {	/* [11.7] */
+	// offset 0x0180, 0x01a0, 0x01c0, 0x01e0,
+	u32		dmactl;
+#define     DMA_SCATTER_GATHER_DONE_INTERRUPT_ENABLE            25
+#define     DMA_CLEAR_COUNT_ENABLE                              21
+#define     DESCRIPTOR_POLLING_RATE                             19
+#define         POLL_CONTINUOUS                                     0
+#define         POLL_1_USEC                                         1
+#define         POLL_100_USEC                                       2
+#define         POLL_1_MSEC                                         3
+#define     DMA_VALID_BIT_POLLING_ENABLE                        18
+#define     DMA_VALID_BIT_ENABLE                                17
+#define     DMA_SCATTER_GATHER_ENABLE                           16
+#define     DMA_OUT_AUTO_START_ENABLE                           4
+#define     DMA_PREEMPT_ENABLE                                  3
+#define     DMA_FIFO_VALIDATE                                   2
+#define     DMA_ENABLE                                          1
+#define     DMA_ADDRESS_HOLD                                    0
+	u32		dmastat;
+#define     DMA_ABORT_DONE_INTERRUPT                            27
+#define     DMA_SCATTER_GATHER_DONE_INTERRUPT                   25
+#define     DMA_TRANSACTION_DONE_INTERRUPT                      24
+#define     DMA_ABORT                                           1
+#define     DMA_START                                           0
+	u32		_unused0 [2];
+	// offset 0x0190, 0x01b0, 0x01d0, 0x01f0,
+	u32		dmacount;
+#define     VALID_BIT                                           31
+#define     DMA_DIRECTION                                       30
+#define     DMA_DONE_INTERRUPT_ENABLE                           29
+#define     END_OF_CHAIN                                        28
+#define         DMA_BYTE_COUNT_MASK                                 ((1<<24)-1)
+#define     DMA_BYTE_COUNT                                      0
+	u32		dmaaddr;
+	u32		dmadesc;
+	u32		_unused1;
+} __attribute__ ((packed));
+
+/* dedicated endpoint registers, BAR0 + 0x0200 */
+
+struct net2280_dep_regs {	/* [11.8] */
+	// offset 0x0200, 0x0210, 0x220, 0x230, 0x240
+	u32		dep_cfg;
+	// offset 0x0204, 0x0214, 0x224, 0x234, 0x244
+	u32		dep_rsp;
+	u32		_unused [2];
+} __attribute__ ((packed));
+
+/* configurable endpoint registers, BAR0 + 0x0300 ... array of seven structs
+ * like this, for ep0 then the configurable endpoints A..F
+ * ep0 reserved for control; E and F have only 64 bytes of fifo
+ */
+struct net2280_ep_regs {	/* [11.9] */
+	// offset 0x0300, 0x0320, 0x0340, 0x0360, 0x0380, 0x03a0, 0x03c0
+	u32		ep_cfg;
+#define     ENDPOINT_BYTE_COUNT                                 16
+#define     ENDPOINT_ENABLE                                     10
+#define     ENDPOINT_TYPE                                       8
+#define     ENDPOINT_DIRECTION                                  7
+#define     ENDPOINT_NUMBER                                     0
+	u32		ep_rsp;
+#define     SET_NAK_OUT_PACKETS                                 15
+#define     SET_EP_HIDE_STATUS_PHASE                            14
+#define     SET_EP_FORCE_CRC_ERROR                              13
+#define     SET_INTERRUPT_MODE                                  12
+#define     SET_CONTROL_STATUS_PHASE_HANDSHAKE                  11
+#define     SET_NAK_OUT_PACKETS_MODE                            10
+#define     SET_ENDPOINT_TOGGLE                                 9
+#define     SET_ENDPOINT_HALT                                   8
+#define     CLEAR_NAK_OUT_PACKETS                               7
+#define     CLEAR_EP_HIDE_STATUS_PHASE                          6
+#define     CLEAR_EP_FORCE_CRC_ERROR                            5
+#define     CLEAR_INTERRUPT_MODE                                4
+#define     CLEAR_CONTROL_STATUS_PHASE_HANDSHAKE                3
+#define     CLEAR_NAK_OUT_PACKETS_MODE                          2
+#define     CLEAR_ENDPOINT_TOGGLE                               1
+#define     CLEAR_ENDPOINT_HALT                                 0
+	u32		ep_irqenb;
+#define     SHORT_PACKET_OUT_DONE_INTERRUPT_ENABLE              6
+#define     SHORT_PACKET_TRANSFERRED_INTERRUPT_ENABLE           5
+#define     DATA_PACKET_RECEIVED_INTERRUPT_ENABLE               3
+#define     DATA_PACKET_TRANSMITTED_INTERRUPT_ENABLE            2
+#define     DATA_OUT_PING_TOKEN_INTERRUPT_ENABLE                1
+#define     DATA_IN_TOKEN_INTERRUPT_ENABLE                      0
+	u32		ep_stat;
+#define     FIFO_VALID_COUNT                                    24
+#define     HIGH_BANDWIDTH_OUT_TRANSACTION_PID                  22
+#define     TIMEOUT                                             21
+#define     USB_STALL_SENT                                      20
+#define     USB_IN_NAK_SENT                                     19
+#define     USB_IN_ACK_RCVD                                     18
+#define     USB_OUT_PING_NAK_SENT                               17
+#define     USB_OUT_ACK_SENT                                    16
+#define     FIFO_OVERFLOW                                       13
+#define     FIFO_UNDERFLOW                                      12
+#define     FIFO_FULL                                           11
+#define     FIFO_EMPTY                                          10
+#define     FIFO_FLUSH                                          9
+#define     SHORT_PACKET_OUT_DONE_INTERRUPT                     6
+#define     SHORT_PACKET_TRANSFERRED_INTERRUPT                  5
+#define     NAK_OUT_PACKETS                                     4
+#define     DATA_PACKET_RECEIVED_INTERRUPT                      3
+#define     DATA_PACKET_TRANSMITTED_INTERRUPT                   2
+#define     DATA_OUT_PING_TOKEN_INTERRUPT                       1
+#define     DATA_IN_TOKEN_INTERRUPT                             0
+	// offset 0x0310, 0x0330, 0x0350, 0x0370, 0x0390, 0x03b0, 0x03d0
+	u32		ep_avail;
+	u32		ep_data;
+	u32		_unused0 [2];
+} __attribute__ ((packed));
+
+#endif /* __LINUX_USB_NET2280_H */
diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h
index d7670ec1ec1e..ad7fa9c86c10 100644
--- a/include/linux/videodev2.h
+++ b/include/linux/videodev2.h
@@ -1141,8 +1141,13 @@ extern char *v4l2_type_names[];
 /*  Compatibility layer interface  --  v4l1-compat module */
 typedef int (*v4l2_kioctl)(struct inode *inode, struct file *file,
 			   unsigned int cmd, void *arg);
+
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
 int v4l_compat_translate_ioctl(struct inode *inode, struct file *file,
 			       int cmd, void *arg, v4l2_kioctl driver_ioctl);
+#else
+#define v4l_compat_translate_ioctl(inode,file,cmd,arg,ioctl) -EINVAL
+#endif
 
 /* 32 Bits compatibility layer for 64 bits processors */
 extern long v4l_compat_ioctl32(struct file *file, unsigned int cmd,
diff --git a/include/linux/vt_kern.h b/include/linux/vt_kern.h
index 530ae3f4248c..fab5aed8ca31 100644
--- a/include/linux/vt_kern.h
+++ b/include/linux/vt_kern.h
@@ -73,11 +73,6 @@ int con_copy_unimap(struct vc_data *dst_vc, struct vc_data *src_vc);
 int vt_waitactive(int vt);
 void change_console(struct vc_data *new_vc);
 void reset_vc(struct vc_data *vc);
-#ifdef CONFIG_VT
-int is_console_suspend_safe(void);
-#else
-static inline int is_console_suspend_safe(void) { return 1; }
-#endif
 
 /*
  * vc_screen.c shares this temporary buffer with the console write code so that
diff --git a/include/net/arp.h b/include/net/arp.h
index a13e30c35f42..643bded9f557 100644
--- a/include/net/arp.h
+++ b/include/net/arp.h
@@ -10,8 +10,6 @@
 extern struct neigh_table arp_tbl;
 
 extern void	arp_init(void);
-extern int	arp_rcv(struct sk_buff *skb, struct net_device *dev,
-			struct packet_type *pt, struct net_device *orig_dev);
 extern int	arp_find(unsigned char *haddr, struct sk_buff *skb);
 extern int	arp_ioctl(unsigned int cmd, void __user *arg);
 extern void     arp_send(int type, int ptype, u32 dest_ip, 
diff --git a/include/net/ax25.h b/include/net/ax25.h
index d052b221dbcd..5bd997487054 100644
--- a/include/net/ax25.h
+++ b/include/net/ax25.h
@@ -145,14 +145,14 @@ enum {
 #define	AX25_DEF_CONMODE	2			/* Connected mode allowed */
 #define	AX25_DEF_WINDOW		2			/* Window=2 */
 #define	AX25_DEF_EWINDOW	32			/* Module-128 Window=32 */
-#define	AX25_DEF_T1		(10 * HZ)		/* T1=10s */
-#define	AX25_DEF_T2		(3 * HZ)		/* T2=3s  */
-#define	AX25_DEF_T3		(300 * HZ)		/* T3=300s */
+#define	AX25_DEF_T1		10000			/* T1=10s */
+#define	AX25_DEF_T2		3000			/* T2=3s  */
+#define	AX25_DEF_T3		300000			/* T3=300s */
 #define	AX25_DEF_N2		10			/* N2=10 */
-#define AX25_DEF_IDLE		(0 * 60 * HZ)		/* Idle=None */
+#define AX25_DEF_IDLE		0			/* Idle=None */
 #define AX25_DEF_PACLEN		256			/* Paclen=256 */
 #define	AX25_DEF_PROTOCOL	AX25_PROTO_STD_SIMPLEX	/* Standard AX.25 */
-#define AX25_DEF_DS_TIMEOUT	(3 * 60 * HZ)		/* DAMA timeout 3 minutes */
+#define AX25_DEF_DS_TIMEOUT	180000			/* DAMA timeout 3 minutes */
 
 typedef struct ax25_uid_assoc {
 	struct hlist_node	uid_node;
diff --git a/include/net/compat.h b/include/net/compat.h
index 8662b8f43df5..e65cbedb6abc 100644
--- a/include/net/compat.h
+++ b/include/net/compat.h
@@ -3,6 +3,8 @@
 
 #include <linux/config.h>
 
+struct sock;
+
 #if defined(CONFIG_COMPAT)
 
 #include <linux/compat.h>
@@ -23,7 +25,6 @@ struct compat_cmsghdr {
 	compat_int_t	cmsg_type;
 };
 
-struct sock;
 extern int compat_sock_get_timestamp(struct sock *, struct timeval __user *);
 
 #else /* defined(CONFIG_COMPAT) */
diff --git a/include/net/ieee80211.h b/include/net/ieee80211.h
index 4725ff861c57..d5926bfb1fc9 100644
--- a/include/net/ieee80211.h
+++ b/include/net/ieee80211.h
@@ -955,11 +955,13 @@ enum ieee80211_state {
 
 #define IEEE80211_24GHZ_MIN_CHANNEL 1
 #define IEEE80211_24GHZ_MAX_CHANNEL 14
-#define IEEE80211_24GHZ_CHANNELS    14
+#define IEEE80211_24GHZ_CHANNELS (IEEE80211_24GHZ_MAX_CHANNEL - \
+				  IEEE80211_24GHZ_MIN_CHANNEL + 1)
 
 #define IEEE80211_52GHZ_MIN_CHANNEL 34
 #define IEEE80211_52GHZ_MAX_CHANNEL 165
-#define IEEE80211_52GHZ_CHANNELS    131
+#define IEEE80211_52GHZ_CHANNELS (IEEE80211_52GHZ_MAX_CHANNEL - \
+				  IEEE80211_52GHZ_MIN_CHANNEL + 1)
 
 enum {
 	IEEE80211_CH_PASSIVE_ONLY = (1 << 0),
diff --git a/include/net/ieee80211softmac.h b/include/net/ieee80211softmac.h
index b971d8c82bdd..052ed596a4e4 100644
--- a/include/net/ieee80211softmac.h
+++ b/include/net/ieee80211softmac.h
@@ -96,10 +96,13 @@ struct ieee80211softmac_assoc_info {
 	 *
 	 * bssvalid is true if we found a matching network
 	 * and saved it's BSSID into the bssid above.
+	 *
+	 * bssfixed is used for SIOCSIWAP.
 	 */
 	u8 static_essid:1,
 	   associating:1,
-	   bssvalid:1;
+	   bssvalid:1,
+	   bssfixed:1;
 
 	/* Scan retries remaining */
 	int scan_retry;
@@ -201,7 +204,8 @@ struct ieee80211softmac_device {
 	
 	/* couple of flags */
 	u8 scanning:1, /* protects scanning from being done multiple times at once */
-	   associated:1;
+	   associated:1,
+	   running:1;
 	
 	struct ieee80211softmac_scaninfo *scaninfo;
 	struct ieee80211softmac_assoc_info associnfo;
@@ -267,8 +271,9 @@ extern void ieee80211softmac_stop(struct net_device *dev);
 #define IEEE80211SOFTMAC_EVENT_AUTH_FAILED		5
 #define IEEE80211SOFTMAC_EVENT_AUTH_TIMEOUT		6
 #define IEEE80211SOFTMAC_EVENT_ASSOCIATE_NET_NOT_FOUND	7
+#define IEEE80211SOFTMAC_EVENT_DISASSOCIATED		8
 /* keep this updated! */
-#define IEEE80211SOFTMAC_EVENT_LAST			7
+#define IEEE80211SOFTMAC_EVENT_LAST			8
 /*
  * If you want to be notified of certain events, you can call
  * ieee80211softmac_notify[_atomic] with
diff --git a/include/net/inet_timewait_sock.h b/include/net/inet_timewait_sock.h
index 1da294c47522..e837f98fdb50 100644
--- a/include/net/inet_timewait_sock.h
+++ b/include/net/inet_timewait_sock.h
@@ -150,7 +150,7 @@ static inline void inet_twsk_add_bind_node(struct inet_timewait_sock *tw,
 
 static inline int inet_twsk_dead_hashed(const struct inet_timewait_sock *tw)
 {
-	return tw->tw_death_node.pprev != NULL;
+	return !hlist_unhashed(&tw->tw_death_node);
 }
 
 static inline void inet_twsk_dead_node_init(struct inet_timewait_sock *tw)
diff --git a/include/net/ipv6.h b/include/net/ipv6.h
index 6d6f0634ae41..4abedb8eaece 100644
--- a/include/net/ipv6.h
+++ b/include/net/ipv6.h
@@ -230,7 +230,7 @@ extern int 			ip6_ra_control(struct sock *sk, int sel,
 					       void (*destructor)(struct sock *));
 
 
-extern int			ipv6_parse_hopopts(struct sk_buff *skb, int);
+extern int			ipv6_parse_hopopts(struct sk_buff *skb);
 
 extern struct ipv6_txoptions *  ipv6_dup_options(struct sock *sk, struct ipv6_txoptions *opt);
 extern struct ipv6_txoptions *	ipv6_renew_options(struct sock *sk, struct ipv6_txoptions *opt,
diff --git a/include/net/irda/irlmp.h b/include/net/irda/irlmp.h
index 86aefb1fda5e..c0c895d379ba 100644
--- a/include/net/irda/irlmp.h
+++ b/include/net/irda/irlmp.h
@@ -112,7 +112,7 @@ struct lsap_cb {
 
 	struct timer_list watchdog_timer;
 
-	IRLMP_STATE     lsap_state;  /* Connection state */
+	LSAP_STATE      lsap_state;  /* Connection state */
 	notify_t        notify;      /* Indication/Confirm entry points */
 	struct qos_info qos;         /* QoS for this connection */
 
diff --git a/include/net/neighbour.h b/include/net/neighbour.h
index b0666d66293f..4901ee446879 100644
--- a/include/net/neighbour.h
+++ b/include/net/neighbour.h
@@ -211,6 +211,7 @@ struct neigh_table
 #define NEIGH_UPDATE_F_ADMIN			0x80000000
 
 extern void			neigh_table_init(struct neigh_table *tbl);
+extern void			neigh_table_init_no_netlink(struct neigh_table *tbl);
 extern int			neigh_table_clear(struct neigh_table *tbl);
 extern struct neighbour *	neigh_lookup(struct neigh_table *tbl,
 					     const void *pkey,
diff --git a/include/net/netrom.h b/include/net/netrom.h
index a5ee53bce62f..e0ca112024a3 100644
--- a/include/net/netrom.h
+++ b/include/net/netrom.h
@@ -42,11 +42,11 @@ enum {
 #define	NR_COND_PEER_RX_BUSY		0x04
 #define	NR_COND_OWN_RX_BUSY		0x08
 
-#define NR_DEFAULT_T1			(120 * HZ)	/* Outstanding frames - 120 seconds */
-#define NR_DEFAULT_T2			(5   * HZ)	/* Response delay     - 5 seconds */
+#define NR_DEFAULT_T1			120000		/* Outstanding frames - 120 seconds */
+#define NR_DEFAULT_T2			5000		/* Response delay     - 5 seconds */
 #define NR_DEFAULT_N2			3		/* Number of Retries - 3 */
-#define	NR_DEFAULT_T4			(180 * HZ)	/* Busy Delay - 180 seconds */
-#define	NR_DEFAULT_IDLE			(0 * 60 * HZ)	/* No Activity Timeout - none */
+#define	NR_DEFAULT_T4			180000		/* Busy Delay - 180 seconds */
+#define	NR_DEFAULT_IDLE			0		/* No Activity Timeout - none */
 #define	NR_DEFAULT_WINDOW		4		/* Default Window Size - 4 */
 #define	NR_DEFAULT_OBS			6		/* Default Obsolescence Count - 6 */
 #define	NR_DEFAULT_QUAL			10		/* Default Neighbour Quality - 10 */
diff --git a/include/net/rose.h b/include/net/rose.h
index 3249b979605a..012b09ed2401 100644
--- a/include/net/rose.h
+++ b/include/net/rose.h
@@ -49,14 +49,14 @@ enum {
 	ROSE_STATE_5			/* Deferred Call Acceptance */
 };
 
-#define ROSE_DEFAULT_T0			(180 * HZ)	/* Default T10 T20 value */
-#define ROSE_DEFAULT_T1			(200 * HZ)	/* Default T11 T21 value */
-#define ROSE_DEFAULT_T2			(180 * HZ)	/* Default T12 T22 value */
-#define	ROSE_DEFAULT_T3			(180 * HZ)	/* Default T13 T23 value */
-#define	ROSE_DEFAULT_HB			(5 * HZ)	/* Default Holdback value */
-#define	ROSE_DEFAULT_IDLE		(0 * 60 * HZ)	/* No Activity Timeout - none */
+#define ROSE_DEFAULT_T0			180000		/* Default T10 T20 value */
+#define ROSE_DEFAULT_T1			200000		/* Default T11 T21 value */
+#define ROSE_DEFAULT_T2			180000		/* Default T12 T22 value */
+#define	ROSE_DEFAULT_T3			180000		/* Default T13 T23 value */
+#define	ROSE_DEFAULT_HB			5000		/* Default Holdback value */
+#define	ROSE_DEFAULT_IDLE		0		/* No Activity Timeout - none */
 #define	ROSE_DEFAULT_ROUTING		1		/* Default routing flag */
-#define	ROSE_DEFAULT_FAIL_TIMEOUT	(120 * HZ)	/* Time until link considered usable */
+#define	ROSE_DEFAULT_FAIL_TIMEOUT	120000		/* Time until link considered usable */
 #define	ROSE_DEFAULT_MAXVC		50		/* Maximum number of VCs per neighbour */
 #define	ROSE_DEFAULT_WINDOW_SIZE	7		/* Default window size */
 
diff --git a/include/net/sctp/command.h b/include/net/sctp/command.h
index 34a1a09e5aef..807d6f1ef4b5 100644
--- a/include/net/sctp/command.h
+++ b/include/net/sctp/command.h
@@ -99,6 +99,7 @@ typedef enum {
 	SCTP_CMD_DEL_NON_PRIMARY, /* Removes non-primary peer transports. */
 	SCTP_CMD_T3_RTX_TIMERS_STOP, /* Stops T3-rtx pending timers */
 	SCTP_CMD_FORCE_PRIM_RETRAN,  /* Forces retrans. over primary path. */
+	SCTP_CMD_SET_SK_ERR,	 /* Set sk_err */
 	SCTP_CMD_LAST
 } sctp_verb_t;
 
diff --git a/include/net/sctp/sctp.h b/include/net/sctp/sctp.h
index e673b2c984e9..aa6033ca7cd8 100644
--- a/include/net/sctp/sctp.h
+++ b/include/net/sctp/sctp.h
@@ -461,12 +461,12 @@ static inline int sctp_frag_point(const struct sctp_sock *sp, int pmtu)
  * there is room for a param header too.
  */
 #define sctp_walk_params(pos, chunk, member)\
-_sctp_walk_params((pos), (chunk), WORD_ROUND(ntohs((chunk)->chunk_hdr.length)), member)
+_sctp_walk_params((pos), (chunk), ntohs((chunk)->chunk_hdr.length), member)
 
 #define _sctp_walk_params(pos, chunk, end, member)\
 for (pos.v = chunk->member;\
      pos.v <= (void *)chunk + end - sizeof(sctp_paramhdr_t) &&\
-     pos.v <= (void *)chunk + end - WORD_ROUND(ntohs(pos.p->length)) &&\
+     pos.v <= (void *)chunk + end - ntohs(pos.p->length) &&\
      ntohs(pos.p->length) >= sizeof(sctp_paramhdr_t);\
      pos.v += WORD_ROUND(ntohs(pos.p->length)))
 
@@ -477,7 +477,7 @@ _sctp_walk_errors((err), (chunk_hdr), ntohs((chunk_hdr)->length))
 for (err = (sctp_errhdr_t *)((void *)chunk_hdr + \
 	    sizeof(sctp_chunkhdr_t));\
      (void *)err <= (void *)chunk_hdr + end - sizeof(sctp_errhdr_t) &&\
-     (void *)err <= (void *)chunk_hdr + end - WORD_ROUND(ntohs(err->length)) &&\
+     (void *)err <= (void *)chunk_hdr + end - ntohs(err->length) &&\
      ntohs(err->length) >= sizeof(sctp_errhdr_t); \
      err = (sctp_errhdr_t *)((void *)err + WORD_ROUND(ntohs(err->length))))
 
diff --git a/include/net/sctp/structs.h b/include/net/sctp/structs.h
index eba99f375517..7f4fea173fb1 100644
--- a/include/net/sctp/structs.h
+++ b/include/net/sctp/structs.h
@@ -712,6 +712,7 @@ struct sctp_chunk {
 	__u8 tsn_gap_acked;	/* Is this chunk acked by a GAP ACK? */
 	__s8 fast_retransmit;	 /* Is this chunk fast retransmitted? */
 	__u8 tsn_missing_report; /* Data chunk missing counter. */
+	__u8 data_accepted; 	/* At least 1 chunk in this packet accepted */
 };
 
 void sctp_chunk_hold(struct sctp_chunk *);
diff --git a/include/net/sock.h b/include/net/sock.h
index af2b0544586e..c9fad6fb629b 100644
--- a/include/net/sock.h
+++ b/include/net/sock.h
@@ -279,7 +279,7 @@ static inline int sk_unhashed(const struct sock *sk)
 
 static inline int sk_hashed(const struct sock *sk)
 {
-	return sk->sk_node.pprev != NULL;
+	return !sk_unhashed(sk);
 }
 
 static __inline__ void sk_node_init(struct hlist_node *node)
@@ -454,6 +454,7 @@ static inline void sk_stream_set_owner_r(struct sk_buff *skb, struct sock *sk)
 
 static inline void sk_stream_free_skb(struct sock *sk, struct sk_buff *skb)
 {
+	skb_truesize_check(skb);
 	sock_set_flag(sk, SOCK_QUEUE_SHRUNK);
 	sk->sk_wmem_queued   -= skb->truesize;
 	sk->sk_forward_alloc += skb->truesize;
diff --git a/include/net/xfrm.h b/include/net/xfrm.h
index 0d5529c382e8..afa508d92c93 100644
--- a/include/net/xfrm.h
+++ b/include/net/xfrm.h
@@ -143,6 +143,11 @@ struct xfrm_state
 	/* Replay detection state at the time we sent the last notification */
 	struct xfrm_replay_state preplay;
 
+	/* internal flag that only holds state for delayed aevent at the
+	 * moment
+	*/
+	u32			xflags;
+
 	/* Replay detection notification settings */
 	u32			replay_maxage;
 	u32			replay_maxdiff;
@@ -168,6 +173,9 @@ struct xfrm_state
 	void			*data;
 };
 
+/* xflags - make enum if more show up */
+#define XFRM_TIME_DEFER	1
+
 enum {
 	XFRM_STATE_VOID,
 	XFRM_STATE_ACQ,
diff --git a/include/scsi/srp.h b/include/scsi/srp.h
index 6c2681dc5b46..637f77eccf0c 100644
--- a/include/scsi/srp.h
+++ b/include/scsi/srp.h
@@ -95,14 +95,15 @@ struct srp_direct_buf {
 
 /*
  * We need the packed attribute because the SRP spec puts the list of
- * descriptors at an offset of 20, which is not aligned to the size
- * of struct srp_direct_buf.
+ * descriptors at an offset of 20, which is not aligned to the size of
+ * struct srp_direct_buf.  The whole structure must be packed to avoid
+ * having the 20-byte structure padded to 24 bytes on 64-bit architectures.
  */
 struct srp_indirect_buf {
 	struct srp_direct_buf	table_desc;
 	__be32			len;
-	struct srp_direct_buf	desc_list[0] __attribute__((packed));
-};
+	struct srp_direct_buf	desc_list[0];
+} __attribute__((packed));
 
 enum {
 	SRP_MULTICHAN_SINGLE = 0,
@@ -122,6 +123,11 @@ struct srp_login_req {
 	u8	target_port_id[16];
 };
 
+/*
+ * The SRP spec defines the size of the LOGIN_RSP structure to be 52
+ * bytes, so it needs to be packed to avoid having it padded to 56
+ * bytes on 64-bit architectures.
+ */
 struct srp_login_rsp {
 	u8	opcode;
 	u8	reserved1[3];
@@ -132,7 +138,7 @@ struct srp_login_rsp {
 	__be16	buf_fmt;
 	u8	rsp_flags;
 	u8	reserved2[25];
-};
+} __attribute__((packed));
 
 struct srp_login_rej {
 	u8	opcode;
@@ -207,6 +213,11 @@ enum {
 	SRP_RSP_FLAG_DIUNDER  = 1 << 5
 };
 
+/*
+ * The SRP spec defines the size of the RSP structure to be 36 bytes,
+ * so it needs to be packed to avoid having it padded to 40 bytes on
+ * 64-bit architectures.
+ */
 struct srp_rsp {
 	u8	opcode;
 	u8	sol_not;
@@ -221,6 +232,6 @@ struct srp_rsp {
 	__be32	sense_data_len;
 	__be32	resp_data_len;
 	u8	data[0];
-};
+} __attribute__((packed));
 
 #endif /* SCSI_SRP_H */
diff --git a/include/sound/pcm.h b/include/sound/pcm.h
index df70e7592ab5..373425895faa 100644
--- a/include/sound/pcm.h
+++ b/include/sound/pcm.h
@@ -374,12 +374,14 @@ struct snd_pcm_substream {
 	/* -- OSS things -- */
 	struct snd_pcm_oss_substream oss;
 #endif
+#ifdef CONFIG_SND_VERBOSE_PROCFS
 	struct snd_info_entry *proc_root;
 	struct snd_info_entry *proc_info_entry;
 	struct snd_info_entry *proc_hw_params_entry;
 	struct snd_info_entry *proc_sw_params_entry;
 	struct snd_info_entry *proc_status_entry;
 	struct snd_info_entry *proc_prealloc_entry;
+#endif
 	/* misc flags */
 	unsigned int no_mmap_ctrl: 1;
 	unsigned int hw_opened: 1;
@@ -400,12 +402,14 @@ struct snd_pcm_str {
 	struct snd_pcm_oss_stream oss;
 #endif
 	struct snd_pcm_file *files;
+#ifdef CONFIG_SND_VERBOSE_PROCFS
 	struct snd_info_entry *proc_root;
 	struct snd_info_entry *proc_info_entry;
-#ifdef CONFIG_SND_DEBUG
+#ifdef CONFIG_SND_PCM_XRUN_DEBUG
 	unsigned int xrun_debug;	/* 0 = disabled, 1 = verbose, 2 = stacktrace */
 	struct snd_info_entry *proc_xrun_debug_entry;
 #endif
+#endif
 };
 
 struct snd_pcm {
diff --git a/include/sound/pcm_oss.h b/include/sound/pcm_oss.h
index 39df2baca18a..c854647b6f3c 100644
--- a/include/sound/pcm_oss.h
+++ b/include/sound/pcm_oss.h
@@ -75,7 +75,9 @@ struct snd_pcm_oss_substream {
 struct snd_pcm_oss_stream {
 	struct snd_pcm_oss_setup *setup_list;	/* setup list */
 	struct mutex setup_mutex;
+#ifdef CONFIG_SND_VERBOSE_PROCFS
 	struct snd_info_entry *proc_entry;
+#endif
 };
 
 struct snd_pcm_oss {
diff --git a/init/Kconfig b/init/Kconfig
index f1bc2f0e94e5..3b36a1d53656 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -374,15 +374,6 @@ config SLAB
 	  SLOB is more space efficient but does not scale well and is
 	  more susceptible to fragmentation.
 
-config DOUBLEFAULT
-	default y
-	bool "Enable doublefault exception handler" if EMBEDDED && X86_32
-	help
-          This option allows trapping of rare doublefault exceptions that
-          would otherwise cause a system to silently reboot. Disabling this
-          option saves about 4k and might cause you much additional grey
-          hair.
-
 endmenu		# General setup
 
 config TINY_SHMEM
diff --git a/init/do_mounts.c b/init/do_mounts.c
index adb7cad3e6ee..f4b7b9d278cd 100644
--- a/init/do_mounts.c
+++ b/init/do_mounts.c
@@ -310,6 +310,11 @@ retry:
 
 		panic("VFS: Unable to mount root fs on %s", b);
 	}
+
+	printk("No filesystem could mount root, tried: ");
+	for (p = fs_names; *p; p += strlen(p)+1)
+		printk(" %s", p);
+	printk("\n");
 	panic("VFS: Unable to mount root fs on %s", __bdevname(ROOT_DEV, b));
 out:
 	putname(fs_names);
diff --git a/init/initramfs.c b/init/initramfs.c
index 679d870d991b..f81cfa40a719 100644
--- a/init/initramfs.c
+++ b/init/initramfs.c
@@ -26,10 +26,12 @@ static void __init free(void *where)
 
 /* link hash */
 
+#define N_ALIGN(len) ((((len) + 1) & ~3) + 2)
+
 static __initdata struct hash {
 	int ino, minor, major;
 	struct hash *next;
-	char *name;
+	char name[N_ALIGN(PATH_MAX)];
 } *head[32];
 
 static inline int hash(int major, int minor, int ino)
@@ -57,7 +59,7 @@ static char __init *find_link(int major, int minor, int ino, char *name)
 	q->ino = ino;
 	q->minor = minor;
 	q->major = major;
-	q->name = name;
+	strcpy(q->name, name);
 	q->next = NULL;
 	*p = q;
 	return NULL;
@@ -133,8 +135,6 @@ static inline void eat(unsigned n)
 	count -= n;
 }
 
-#define N_ALIGN(len) ((((len) + 1) & ~3) + 2)
-
 static __initdata char *collected;
 static __initdata int remains;
 static __initdata char *collect;
diff --git a/init/main.c b/init/main.c
index 4a2f0898dda1..f715b9b89753 100644
--- a/init/main.c
+++ b/init/main.c
@@ -582,7 +582,7 @@ static void __init do_initcalls(void)
 
 		result = (*call)();
 
-		if (result && (result != -ENODEV || initcall_debug)) {
+		if (result && result != -ENODEV && initcall_debug) {
 			sprintf(msgbuf, "error code %d", result);
 			msg = msgbuf;
 		}
diff --git a/ipc/msg.c b/ipc/msg.c
index 48a7f17a7236..7d1340ccb16b 100644
--- a/ipc/msg.c
+++ b/ipc/msg.c
@@ -13,6 +13,9 @@
  * mostly rewritten, threaded and wake-one semantics added
  * MSGMAX limit removed, sysctl's added
  * (c) 1999 Manfred Spraul <manfred@colorfullife.com>
+ *
+ * support for audit of ipc object properties and permission changes
+ * Dustin Kirkland <dustin.kirkland@us.ibm.com>
  */
 
 #include <linux/capability.h>
@@ -447,6 +450,11 @@ asmlinkage long sys_msgctl (int msqid, int cmd, struct msqid_ds __user *buf)
 	if (msg_checkid(msq,msqid))
 		goto out_unlock_up;
 	ipcp = &msq->q_perm;
+
+	err = audit_ipc_obj(ipcp);
+	if (err)
+		goto out_unlock_up;
+
 	err = -EPERM;
 	if (current->euid != ipcp->cuid && 
 	    current->euid != ipcp->uid && !capable(CAP_SYS_ADMIN))
@@ -460,7 +468,8 @@ asmlinkage long sys_msgctl (int msqid, int cmd, struct msqid_ds __user *buf)
 	switch (cmd) {
 	case IPC_SET:
 	{
-		if ((err = audit_ipc_perms(setbuf.qbytes, setbuf.uid, setbuf.gid, setbuf.mode, ipcp)))
+		err = audit_ipc_set_perm(setbuf.qbytes, setbuf.uid, setbuf.gid, setbuf.mode, ipcp);
+		if (err)
 			goto out_unlock_up;
 
 		err = -EPERM;
diff --git a/ipc/sem.c b/ipc/sem.c
index 642659cd596b..7919f8ece6ba 100644
--- a/ipc/sem.c
+++ b/ipc/sem.c
@@ -61,6 +61,9 @@
  * (c) 2001 Red Hat Inc <alan@redhat.com>
  * Lockless wakeup
  * (c) 2003 Manfred Spraul <manfred@colorfullife.com>
+ *
+ * support for audit of ipc object properties and permission changes
+ * Dustin Kirkland <dustin.kirkland@us.ibm.com>
  */
 
 #include <linux/config.h>
@@ -820,6 +823,11 @@ static int semctl_down(int semid, int semnum, int cmd, int version, union semun
 		goto out_unlock;
 	}	
 	ipcp = &sma->sem_perm;
+
+	err = audit_ipc_obj(ipcp);
+	if (err)
+		goto out_unlock;
+
 	if (current->euid != ipcp->cuid && 
 	    current->euid != ipcp->uid && !capable(CAP_SYS_ADMIN)) {
 	    	err=-EPERM;
@@ -836,7 +844,8 @@ static int semctl_down(int semid, int semnum, int cmd, int version, union semun
 		err = 0;
 		break;
 	case IPC_SET:
-		if ((err = audit_ipc_perms(0, setbuf.uid, setbuf.gid, setbuf.mode, ipcp)))
+		err = audit_ipc_set_perm(0, setbuf.uid, setbuf.gid, setbuf.mode, ipcp);
+		if (err)
 			goto out_unlock;
 		ipcp->uid = setbuf.uid;
 		ipcp->gid = setbuf.gid;
diff --git a/ipc/shm.c b/ipc/shm.c
index 6b0c9af5bbf7..809896851902 100644
--- a/ipc/shm.c
+++ b/ipc/shm.c
@@ -13,6 +13,8 @@
  * Shared /dev/zero support, Kanoj Sarcar <kanoj@sgi.com>
  * Move the mm functionality over to mm/shmem.c, Christoph Rohland <cr@sap.com>
  *
+ * support for audit of ipc object properties and permission changes
+ * Dustin Kirkland <dustin.kirkland@us.ibm.com>
  */
 
 #include <linux/config.h>
@@ -162,6 +164,8 @@ static int shm_mmap(struct file * file, struct vm_area_struct * vma)
 	ret = shmem_mmap(file, vma);
 	if (ret == 0) {
 		vma->vm_ops = &shm_vm_ops;
+		if (!(vma->vm_flags & VM_WRITE))
+			vma->vm_flags &= ~VM_MAYWRITE;
 		shm_inc(file->f_dentry->d_inode->i_ino);
 	}
 
@@ -540,6 +544,10 @@ asmlinkage long sys_shmctl (int shmid, int cmd, struct shmid_ds __user *buf)
 		if(err)
 			goto out_unlock;
 
+		err = audit_ipc_obj(&(shp->shm_perm));
+		if (err)
+			goto out_unlock;
+
 		if (!capable(CAP_IPC_LOCK)) {
 			err = -EPERM;
 			if (current->euid != shp->shm_perm.uid &&
@@ -592,6 +600,10 @@ asmlinkage long sys_shmctl (int shmid, int cmd, struct shmid_ds __user *buf)
 		if(err)
 			goto out_unlock_up;
 
+		err = audit_ipc_obj(&(shp->shm_perm));
+		if (err)
+			goto out_unlock_up;
+
 		if (current->euid != shp->shm_perm.uid &&
 		    current->euid != shp->shm_perm.cuid && 
 		    !capable(CAP_SYS_ADMIN)) {
@@ -625,12 +637,15 @@ asmlinkage long sys_shmctl (int shmid, int cmd, struct shmid_ds __user *buf)
 		err=-EINVAL;
 		if(shp==NULL)
 			goto out_up;
-		if ((err = audit_ipc_perms(0, setbuf.uid, setbuf.gid,
-					setbuf.mode, &(shp->shm_perm))))
-			goto out_unlock_up;
 		err = shm_checkid(shp,shmid);
 		if(err)
 			goto out_unlock_up;
+		err = audit_ipc_obj(&(shp->shm_perm));
+		if (err)
+			goto out_unlock_up;
+		err = audit_ipc_set_perm(0, setbuf.uid, setbuf.gid, setbuf.mode, &(shp->shm_perm));
+		if (err)
+			goto out_unlock_up;
 		err=-EPERM;
 		if (current->euid != shp->shm_perm.uid &&
 		    current->euid != shp->shm_perm.cuid && 
diff --git a/ipc/util.c b/ipc/util.c
index 5e785a29e1e6..8193299f45f6 100644
--- a/ipc/util.c
+++ b/ipc/util.c
@@ -10,6 +10,8 @@
  *	      Manfred Spraul <manfred@colorfullife.com>
  * Oct 2002 - One lock per IPC id. RCU ipc_free for lock-free grow_ary().
  *            Mingming Cao <cmm@us.ibm.com>
+ * Mar 2006 - support for audit of ipc object properties
+ *            Dustin Kirkland <dustin.kirkland@us.ibm.com>
  */
 
 #include <linux/config.h>
@@ -27,6 +29,7 @@
 #include <linux/workqueue.h>
 #include <linux/seq_file.h>
 #include <linux/proc_fs.h>
+#include <linux/audit.h>
 
 #include <asm/unistd.h>
 
@@ -183,8 +186,7 @@ static int grow_ary(struct ipc_ids* ids, int newsize)
 	if(new == NULL)
 		return size;
 	new->size = newsize;
-	memcpy(new->p, ids->entries->p, sizeof(struct kern_ipc_perm *)*size +
-					sizeof(struct ipc_id_ary));
+	memcpy(new->p, ids->entries->p, sizeof(struct kern_ipc_perm *)*size);
 	for(i=size;i<newsize;i++) {
 		new->p[i] = NULL;
 	}
@@ -465,8 +467,10 @@ void ipc_rcu_putref(void *ptr)
  
 int ipcperms (struct kern_ipc_perm *ipcp, short flag)
 {	/* flag will most probably be 0 or S_...UGO from <linux/stat.h> */
-	int requested_mode, granted_mode;
+	int requested_mode, granted_mode, err;
 
+	if (unlikely((err = audit_ipc_obj(ipcp))))
+		return err;
 	requested_mode = (flag >> 6) | (flag >> 3) | flag;
 	granted_mode = ipcp->mode;
 	if (current->euid == ipcp->cuid || current->euid == ipcp->uid)
diff --git a/kernel/audit.c b/kernel/audit.c
index c8ccbd09048f..df57b493e1cb 100644
--- a/kernel/audit.c
+++ b/kernel/audit.c
@@ -55,6 +55,9 @@
 #include <net/netlink.h>
 #include <linux/skbuff.h>
 #include <linux/netlink.h>
+#include <linux/selinux.h>
+
+#include "audit.h"
 
 /* No auditing will take place until audit_initialized != 0.
  * (Initialization happens after skb_init is called.) */
@@ -227,49 +230,103 @@ void audit_log_lost(const char *message)
 	}
 }
 
-static int audit_set_rate_limit(int limit, uid_t loginuid)
+static int audit_set_rate_limit(int limit, uid_t loginuid, u32 sid)
 {
-	int old		 = audit_rate_limit;
-	audit_rate_limit = limit;
-	audit_log(NULL, GFP_KERNEL, AUDIT_CONFIG_CHANGE, 
+	int old	= audit_rate_limit;
+
+	if (sid) {
+		char *ctx = NULL;
+		u32 len;
+		int rc;
+		if ((rc = selinux_ctxid_to_string(sid, &ctx, &len)))
+			return rc;
+		else
+			audit_log(NULL, GFP_KERNEL, AUDIT_CONFIG_CHANGE,
+				"audit_rate_limit=%d old=%d by auid=%u subj=%s",
+				limit, old, loginuid, ctx);
+		kfree(ctx);
+	} else
+		audit_log(NULL, GFP_KERNEL, AUDIT_CONFIG_CHANGE,
 			"audit_rate_limit=%d old=%d by auid=%u",
-			audit_rate_limit, old, loginuid);
+			limit, old, loginuid);
+	audit_rate_limit = limit;
 	return old;
 }
 
-static int audit_set_backlog_limit(int limit, uid_t loginuid)
+static int audit_set_backlog_limit(int limit, uid_t loginuid, u32 sid)
 {
-	int old		 = audit_backlog_limit;
-	audit_backlog_limit = limit;
-	audit_log(NULL, GFP_KERNEL, AUDIT_CONFIG_CHANGE,
+	int old	= audit_backlog_limit;
+
+	if (sid) {
+		char *ctx = NULL;
+		u32 len;
+		int rc;
+		if ((rc = selinux_ctxid_to_string(sid, &ctx, &len)))
+			return rc;
+		else
+			audit_log(NULL, GFP_KERNEL, AUDIT_CONFIG_CHANGE,
+			    "audit_backlog_limit=%d old=%d by auid=%u subj=%s",
+				limit, old, loginuid, ctx);
+		kfree(ctx);
+	} else
+		audit_log(NULL, GFP_KERNEL, AUDIT_CONFIG_CHANGE,
 			"audit_backlog_limit=%d old=%d by auid=%u",
-			audit_backlog_limit, old, loginuid);
+			limit, old, loginuid);
+	audit_backlog_limit = limit;
 	return old;
 }
 
-static int audit_set_enabled(int state, uid_t loginuid)
+static int audit_set_enabled(int state, uid_t loginuid, u32 sid)
 {
-	int old		 = audit_enabled;
+	int old = audit_enabled;
+
 	if (state != 0 && state != 1)
 		return -EINVAL;
-	audit_enabled = state;
-	audit_log(NULL, GFP_KERNEL, AUDIT_CONFIG_CHANGE,
+
+	if (sid) {
+		char *ctx = NULL;
+		u32 len;
+		int rc;
+		if ((rc = selinux_ctxid_to_string(sid, &ctx, &len)))
+			return rc;
+		else
+			audit_log(NULL, GFP_KERNEL, AUDIT_CONFIG_CHANGE,
+				"audit_enabled=%d old=%d by auid=%u subj=%s",
+				state, old, loginuid, ctx);
+		kfree(ctx);
+	} else
+		audit_log(NULL, GFP_KERNEL, AUDIT_CONFIG_CHANGE,
 			"audit_enabled=%d old=%d by auid=%u",
-			audit_enabled, old, loginuid);
+			state, old, loginuid);
+	audit_enabled = state;
 	return old;
 }
 
-static int audit_set_failure(int state, uid_t loginuid)
+static int audit_set_failure(int state, uid_t loginuid, u32 sid)
 {
-	int old		 = audit_failure;
+	int old = audit_failure;
+
 	if (state != AUDIT_FAIL_SILENT
 	    && state != AUDIT_FAIL_PRINTK
 	    && state != AUDIT_FAIL_PANIC)
 		return -EINVAL;
-	audit_failure = state;
-	audit_log(NULL, GFP_KERNEL, AUDIT_CONFIG_CHANGE,
+
+	if (sid) {
+		char *ctx = NULL;
+		u32 len;
+		int rc;
+		if ((rc = selinux_ctxid_to_string(sid, &ctx, &len)))
+			return rc;
+		else
+			audit_log(NULL, GFP_KERNEL, AUDIT_CONFIG_CHANGE,
+				"audit_failure=%d old=%d by auid=%u subj=%s",
+				state, old, loginuid, ctx);
+		kfree(ctx);
+	} else
+		audit_log(NULL, GFP_KERNEL, AUDIT_CONFIG_CHANGE,
 			"audit_failure=%d old=%d by auid=%u",
-			audit_failure, old, loginuid);
+			state, old, loginuid);
+	audit_failure = state;
 	return old;
 }
 
@@ -387,7 +444,7 @@ static int audit_netlink_ok(kernel_cap_t eff_cap, u16 msg_type)
 
 static int audit_receive_msg(struct sk_buff *skb, struct nlmsghdr *nlh)
 {
-	u32			uid, pid, seq;
+	u32			uid, pid, seq, sid;
 	void			*data;
 	struct audit_status	*status_get, status_set;
 	int			err;
@@ -413,6 +470,7 @@ static int audit_receive_msg(struct sk_buff *skb, struct nlmsghdr *nlh)
 	pid  = NETLINK_CREDS(skb)->pid;
 	uid  = NETLINK_CREDS(skb)->uid;
 	loginuid = NETLINK_CB(skb).loginuid;
+	sid  = NETLINK_CB(skb).sid;
 	seq  = nlh->nlmsg_seq;
 	data = NLMSG_DATA(nlh);
 
@@ -433,25 +491,43 @@ static int audit_receive_msg(struct sk_buff *skb, struct nlmsghdr *nlh)
 			return -EINVAL;
 		status_get   = (struct audit_status *)data;
 		if (status_get->mask & AUDIT_STATUS_ENABLED) {
-			err = audit_set_enabled(status_get->enabled, loginuid);
+			err = audit_set_enabled(status_get->enabled,
+							loginuid, sid);
 			if (err < 0) return err;
 		}
 		if (status_get->mask & AUDIT_STATUS_FAILURE) {
-			err = audit_set_failure(status_get->failure, loginuid);
+			err = audit_set_failure(status_get->failure,
+							 loginuid, sid);
 			if (err < 0) return err;
 		}
 		if (status_get->mask & AUDIT_STATUS_PID) {
 			int old   = audit_pid;
+			if (sid) {
+				char *ctx = NULL;
+				u32 len;
+				int rc;
+				if ((rc = selinux_ctxid_to_string(
+						sid, &ctx, &len)))
+					return rc;
+				else
+					audit_log(NULL, GFP_KERNEL,
+						AUDIT_CONFIG_CHANGE,
+						"audit_pid=%d old=%d by auid=%u subj=%s",
+						status_get->pid, old,
+						loginuid, ctx);
+				kfree(ctx);
+			} else
+				audit_log(NULL, GFP_KERNEL, AUDIT_CONFIG_CHANGE,
+					"audit_pid=%d old=%d by auid=%u",
+					  status_get->pid, old, loginuid);
 			audit_pid = status_get->pid;
-			audit_log(NULL, GFP_KERNEL, AUDIT_CONFIG_CHANGE,
-				"audit_pid=%d old=%d by auid=%u",
-				  audit_pid, old, loginuid);
 		}
 		if (status_get->mask & AUDIT_STATUS_RATE_LIMIT)
-			audit_set_rate_limit(status_get->rate_limit, loginuid);
+			audit_set_rate_limit(status_get->rate_limit,
+							 loginuid, sid);
 		if (status_get->mask & AUDIT_STATUS_BACKLOG_LIMIT)
 			audit_set_backlog_limit(status_get->backlog_limit,
-							loginuid);
+							loginuid, sid);
 		break;
 	case AUDIT_USER:
 	case AUDIT_FIRST_USER_MSG...AUDIT_LAST_USER_MSG:
@@ -465,8 +541,23 @@ static int audit_receive_msg(struct sk_buff *skb, struct nlmsghdr *nlh)
 			ab = audit_log_start(NULL, GFP_KERNEL, msg_type);
 			if (ab) {
 				audit_log_format(ab,
-						 "user pid=%d uid=%u auid=%u msg='%.1024s'",
-						 pid, uid, loginuid, (char *)data);
+						 "user pid=%d uid=%u auid=%u",
+						 pid, uid, loginuid);
+				if (sid) {
+					char *ctx = NULL;
+					u32 len;
+					if (selinux_ctxid_to_string(
+							sid, &ctx, &len)) {
+						audit_log_format(ab, 
+							" ssid=%u", sid);
+						/* Maybe call audit_panic? */
+					} else
+						audit_log_format(ab, 
+							" subj=%s", ctx);
+					kfree(ctx);
+				}
+				audit_log_format(ab, " msg='%.1024s'",
+					 (char *)data);
 				audit_set_pid(ab, pid);
 				audit_log_end(ab);
 			}
@@ -480,7 +571,7 @@ static int audit_receive_msg(struct sk_buff *skb, struct nlmsghdr *nlh)
 	case AUDIT_LIST:
 		err = audit_receive_filter(nlh->nlmsg_type, NETLINK_CB(skb).pid,
 					   uid, seq, data, nlmsg_len(nlh),
-					   loginuid);
+					   loginuid, sid);
 		break;
 	case AUDIT_ADD_RULE:
 	case AUDIT_DEL_RULE:
@@ -490,7 +581,7 @@ static int audit_receive_msg(struct sk_buff *skb, struct nlmsghdr *nlh)
 	case AUDIT_LIST_RULES:
 		err = audit_receive_filter(nlh->nlmsg_type, NETLINK_CB(skb).pid,
 					   uid, seq, data, nlmsg_len(nlh),
-					   loginuid);
+					   loginuid, sid);
 		break;
 	case AUDIT_SIGNAL_INFO:
 		sig_data.uid = audit_sig_uid;
@@ -564,6 +655,11 @@ static int __init audit_init(void)
 	skb_queue_head_init(&audit_skb_queue);
 	audit_initialized = 1;
 	audit_enabled = audit_default;
+
+	/* Register the callback with selinux.  This callback will be invoked
+	 * when a new policy is loaded. */
+	selinux_audit_set_callback(&selinux_audit_rule_update);
+
 	audit_log(NULL, GFP_KERNEL, AUDIT_KERNEL, "initialized");
 	return 0;
 }
diff --git a/kernel/audit.h b/kernel/audit.h
index bc5392076e2b..6f733920fd32 100644
--- a/kernel/audit.h
+++ b/kernel/audit.h
@@ -54,9 +54,11 @@ enum audit_state {
 
 /* Rule lists */
 struct audit_field {
-	u32			type;
-	u32			val;
-	u32			op;
+	u32				type;
+	u32				val;
+	u32				op;
+	char				*se_str;
+	struct selinux_audit_rule	*se_rule;
 };
 
 struct audit_krule {
@@ -86,3 +88,5 @@ extern void		    audit_send_reply(int pid, int seq, int type,
 extern void		    audit_log_lost(const char *message);
 extern void		    audit_panic(const char *message);
 extern struct mutex audit_netlink_mutex;
+
+extern int selinux_audit_rule_update(void);
diff --git a/kernel/auditfilter.c b/kernel/auditfilter.c
index d3a8539f3a83..7c134906d689 100644
--- a/kernel/auditfilter.c
+++ b/kernel/auditfilter.c
@@ -23,6 +23,7 @@
 #include <linux/audit.h>
 #include <linux/kthread.h>
 #include <linux/netlink.h>
+#include <linux/selinux.h>
 #include "audit.h"
 
 /* There are three lists of rules -- one to search at task creation
@@ -42,6 +43,13 @@ struct list_head audit_filter_list[AUDIT_NR_FILTERS] = {
 
 static inline void audit_free_rule(struct audit_entry *e)
 {
+	int i;
+	if (e->rule.fields)
+		for (i = 0; i < e->rule.field_count; i++) {
+			struct audit_field *f = &e->rule.fields[i];
+			kfree(f->se_str);
+			selinux_audit_rule_free(f->se_rule);
+		}
 	kfree(e->rule.fields);
 	kfree(e);
 }
@@ -52,9 +60,29 @@ static inline void audit_free_rule_rcu(struct rcu_head *head)
 	audit_free_rule(e);
 }
 
+/* Initialize an audit filterlist entry. */
+static inline struct audit_entry *audit_init_entry(u32 field_count)
+{
+	struct audit_entry *entry;
+	struct audit_field *fields;
+
+	entry = kzalloc(sizeof(*entry), GFP_KERNEL);
+	if (unlikely(!entry))
+		return NULL;
+
+	fields = kzalloc(sizeof(*fields) * field_count, GFP_KERNEL);
+	if (unlikely(!fields)) {
+		kfree(entry);
+		return NULL;
+	}
+	entry->rule.fields = fields;
+
+	return entry;
+}
+
 /* Unpack a filter field's string representation from user-space
  * buffer. */
-static __attribute__((unused)) char *audit_unpack_string(void **bufp, size_t *remain, size_t len)
+static char *audit_unpack_string(void **bufp, size_t *remain, size_t len)
 {
 	char *str;
 
@@ -84,7 +112,6 @@ static inline struct audit_entry *audit_to_entry_common(struct audit_rule *rule)
 {
 	unsigned listnr;
 	struct audit_entry *entry;
-	struct audit_field *fields;
 	int i, err;
 
 	err = -EINVAL;
@@ -108,23 +135,14 @@ static inline struct audit_entry *audit_to_entry_common(struct audit_rule *rule)
 		goto exit_err;
 
 	err = -ENOMEM;
-	entry = kmalloc(sizeof(*entry), GFP_KERNEL);
-	if (unlikely(!entry))
-		goto exit_err;
-	fields = kmalloc(sizeof(*fields) * rule->field_count, GFP_KERNEL);
-	if (unlikely(!fields)) {
-		kfree(entry);
+	entry = audit_init_entry(rule->field_count);
+	if (!entry)
 		goto exit_err;
-	}
-
-	memset(&entry->rule, 0, sizeof(struct audit_krule));
-	memset(fields, 0, sizeof(struct audit_field));
 
 	entry->rule.flags = rule->flags & AUDIT_FILTER_PREPEND;
 	entry->rule.listnr = listnr;
 	entry->rule.action = rule->action;
 	entry->rule.field_count = rule->field_count;
-	entry->rule.fields = fields;
 
 	for (i = 0; i < AUDIT_BITMASK_SIZE; i++)
 		entry->rule.mask[i] = rule->mask[i];
@@ -150,15 +168,20 @@ static struct audit_entry *audit_rule_to_entry(struct audit_rule *rule)
 	for (i = 0; i < rule->field_count; i++) {
 		struct audit_field *f = &entry->rule.fields[i];
 
-		if (rule->fields[i] & AUDIT_UNUSED_BITS) {
-			err = -EINVAL;
-			goto exit_free;
-		}
-
 		f->op = rule->fields[i] & (AUDIT_NEGATE|AUDIT_OPERATORS);
 		f->type = rule->fields[i] & ~(AUDIT_NEGATE|AUDIT_OPERATORS);
 		f->val = rule->values[i];
 
+		if (f->type & AUDIT_UNUSED_BITS ||
+		    f->type == AUDIT_SE_USER ||
+		    f->type == AUDIT_SE_ROLE ||
+		    f->type == AUDIT_SE_TYPE ||
+		    f->type == AUDIT_SE_SEN ||
+		    f->type == AUDIT_SE_CLR) {
+			err = -EINVAL;
+			goto exit_free;
+		}
+
 		entry->rule.vers_ops = (f->op & AUDIT_OPERATORS) ? 2 : 1;
 
 		/* Support for legacy operators where
@@ -188,8 +211,9 @@ static struct audit_entry *audit_data_to_entry(struct audit_rule_data *data,
 	int err = 0;
 	struct audit_entry *entry;
 	void *bufp;
-	/* size_t remain = datasz - sizeof(struct audit_rule_data); */
+	size_t remain = datasz - sizeof(struct audit_rule_data);
 	int i;
+	char *str;
 
 	entry = audit_to_entry_common((struct audit_rule *)data);
 	if (IS_ERR(entry))
@@ -207,10 +231,35 @@ static struct audit_entry *audit_data_to_entry(struct audit_rule_data *data,
 
 		f->op = data->fieldflags[i] & AUDIT_OPERATORS;
 		f->type = data->fields[i];
+		f->val = data->values[i];
+		f->se_str = NULL;
+		f->se_rule = NULL;
 		switch(f->type) {
-		/* call type-specific conversion routines here */
-		default:
-			f->val = data->values[i];
+		case AUDIT_SE_USER:
+		case AUDIT_SE_ROLE:
+		case AUDIT_SE_TYPE:
+		case AUDIT_SE_SEN:
+		case AUDIT_SE_CLR:
+			str = audit_unpack_string(&bufp, &remain, f->val);
+			if (IS_ERR(str))
+				goto exit_free;
+			entry->rule.buflen += f->val;
+
+			err = selinux_audit_rule_init(f->type, f->op, str,
+						      &f->se_rule);
+			/* Keep currently invalid fields around in case they
+			 * become valid after a policy reload. */
+			if (err == -EINVAL) {
+				printk(KERN_WARNING "audit rule for selinux "
+				       "\'%s\' is invalid\n",  str);
+				err = 0;
+			}
+			if (err) {
+				kfree(str);
+				goto exit_free;
+			} else
+				f->se_str = str;
+			break;
 		}
 	}
 
@@ -286,7 +335,14 @@ static struct audit_rule_data *audit_krule_to_data(struct audit_krule *krule)
 		data->fields[i] = f->type;
 		data->fieldflags[i] = f->op;
 		switch(f->type) {
-		/* call type-specific conversion routines here */
+		case AUDIT_SE_USER:
+		case AUDIT_SE_ROLE:
+		case AUDIT_SE_TYPE:
+		case AUDIT_SE_SEN:
+		case AUDIT_SE_CLR:
+			data->buflen += data->values[i] =
+				audit_pack_string(&bufp, f->se_str);
+			break;
 		default:
 			data->values[i] = f->val;
 		}
@@ -314,7 +370,14 @@ static int audit_compare_rule(struct audit_krule *a, struct audit_krule *b)
 			return 1;
 
 		switch(a->fields[i].type) {
-		/* call type-specific comparison routines here */
+		case AUDIT_SE_USER:
+		case AUDIT_SE_ROLE:
+		case AUDIT_SE_TYPE:
+		case AUDIT_SE_SEN:
+		case AUDIT_SE_CLR:
+			if (strcmp(a->fields[i].se_str, b->fields[i].se_str))
+				return 1;
+			break;
 		default:
 			if (a->fields[i].val != b->fields[i].val)
 				return 1;
@@ -328,6 +391,81 @@ static int audit_compare_rule(struct audit_krule *a, struct audit_krule *b)
 	return 0;
 }
 
+/* Duplicate selinux field information.  The se_rule is opaque, so must be
+ * re-initialized. */
+static inline int audit_dupe_selinux_field(struct audit_field *df,
+					   struct audit_field *sf)
+{
+	int ret = 0;
+	char *se_str;
+
+	/* our own copy of se_str */
+	se_str = kstrdup(sf->se_str, GFP_KERNEL);
+	if (unlikely(IS_ERR(se_str)))
+	    return -ENOMEM;
+	df->se_str = se_str;
+
+	/* our own (refreshed) copy of se_rule */
+	ret = selinux_audit_rule_init(df->type, df->op, df->se_str,
+				      &df->se_rule);
+	/* Keep currently invalid fields around in case they
+	 * become valid after a policy reload. */
+	if (ret == -EINVAL) {
+		printk(KERN_WARNING "audit rule for selinux \'%s\' is "
+		       "invalid\n", df->se_str);
+		ret = 0;
+	}
+
+	return ret;
+}
+
+/* Duplicate an audit rule.  This will be a deep copy with the exception
+ * of the watch - that pointer is carried over.  The selinux specific fields
+ * will be updated in the copy.  The point is to be able to replace the old
+ * rule with the new rule in the filterlist, then free the old rule. */
+static struct audit_entry *audit_dupe_rule(struct audit_krule *old)
+{
+	u32 fcount = old->field_count;
+	struct audit_entry *entry;
+	struct audit_krule *new;
+	int i, err = 0;
+
+	entry = audit_init_entry(fcount);
+	if (unlikely(!entry))
+		return ERR_PTR(-ENOMEM);
+
+	new = &entry->rule;
+	new->vers_ops = old->vers_ops;
+	new->flags = old->flags;
+	new->listnr = old->listnr;
+	new->action = old->action;
+	for (i = 0; i < AUDIT_BITMASK_SIZE; i++)
+		new->mask[i] = old->mask[i];
+	new->buflen = old->buflen;
+	new->field_count = old->field_count;
+	memcpy(new->fields, old->fields, sizeof(struct audit_field) * fcount);
+
+	/* deep copy this information, updating the se_rule fields, because
+	 * the originals will all be freed when the old rule is freed. */
+	for (i = 0; i < fcount; i++) {
+		switch (new->fields[i].type) {
+		case AUDIT_SE_USER:
+		case AUDIT_SE_ROLE:
+		case AUDIT_SE_TYPE:
+		case AUDIT_SE_SEN:
+		case AUDIT_SE_CLR:
+			err = audit_dupe_selinux_field(&new->fields[i],
+						       &old->fields[i]);
+		}
+		if (err) {
+			audit_free_rule(entry);
+			return ERR_PTR(err);
+		}
+	}
+
+	return entry;
+}
+
 /* Add rule to given filterlist if not a duplicate.  Protected by
  * audit_netlink_mutex. */
 static inline int audit_add_rule(struct audit_entry *entry,
@@ -448,9 +586,10 @@ static int audit_list_rules(void *_dest)
  * @data: payload data
  * @datasz: size of payload data
  * @loginuid: loginuid of sender
+ * @sid: SE Linux Security ID of sender
  */
 int audit_receive_filter(int type, int pid, int uid, int seq, void *data,
-			 size_t datasz, uid_t loginuid)
+			 size_t datasz, uid_t loginuid, u32 sid)
 {
 	struct task_struct *tsk;
 	int *dest;
@@ -493,9 +632,23 @@ int audit_receive_filter(int type, int pid, int uid, int seq, void *data,
 
 		err = audit_add_rule(entry,
 				     &audit_filter_list[entry->rule.listnr]);
-		audit_log(NULL, GFP_KERNEL, AUDIT_CONFIG_CHANGE,
-			"auid=%u add rule to list=%d res=%d\n",
-			loginuid, entry->rule.listnr, !err);
+		if (sid) {
+			char *ctx = NULL;
+			u32 len;
+			if (selinux_ctxid_to_string(sid, &ctx, &len)) {
+				/* Maybe call audit_panic? */
+				audit_log(NULL, GFP_KERNEL, AUDIT_CONFIG_CHANGE,
+				 "auid=%u ssid=%u add rule to list=%d res=%d",
+				 loginuid, sid, entry->rule.listnr, !err);
+			} else
+				audit_log(NULL, GFP_KERNEL, AUDIT_CONFIG_CHANGE,
+				 "auid=%u subj=%s add rule to list=%d res=%d",
+				 loginuid, ctx, entry->rule.listnr, !err);
+			kfree(ctx);
+		} else
+			audit_log(NULL, GFP_KERNEL, AUDIT_CONFIG_CHANGE,
+				"auid=%u add rule to list=%d res=%d",
+				loginuid, entry->rule.listnr, !err);
 
 		if (err)
 			audit_free_rule(entry);
@@ -511,9 +664,24 @@ int audit_receive_filter(int type, int pid, int uid, int seq, void *data,
 
 		err = audit_del_rule(entry,
 				     &audit_filter_list[entry->rule.listnr]);
-		audit_log(NULL, GFP_KERNEL, AUDIT_CONFIG_CHANGE,
-			"auid=%u remove rule from list=%d res=%d\n",
-			loginuid, entry->rule.listnr, !err);
+
+		if (sid) {
+			char *ctx = NULL;
+			u32 len;
+			if (selinux_ctxid_to_string(sid, &ctx, &len)) {
+				/* Maybe call audit_panic? */
+				audit_log(NULL, GFP_KERNEL, AUDIT_CONFIG_CHANGE,
+					"auid=%u ssid=%u remove rule from list=%d res=%d",
+					 loginuid, sid, entry->rule.listnr, !err);
+			} else
+				audit_log(NULL, GFP_KERNEL, AUDIT_CONFIG_CHANGE,
+					"auid=%u subj=%s remove rule from list=%d res=%d",
+					 loginuid, ctx, entry->rule.listnr, !err);
+			kfree(ctx);
+		} else
+			audit_log(NULL, GFP_KERNEL, AUDIT_CONFIG_CHANGE,
+				"auid=%u remove rule from list=%d res=%d",
+				loginuid, entry->rule.listnr, !err);
 
 		audit_free_rule(entry);
 		break;
@@ -628,3 +796,62 @@ unlock_and_return:
 	rcu_read_unlock();
 	return result;
 }
+
+/* Check to see if the rule contains any selinux fields.  Returns 1 if there
+   are selinux fields specified in the rule, 0 otherwise. */
+static inline int audit_rule_has_selinux(struct audit_krule *rule)
+{
+	int i;
+
+	for (i = 0; i < rule->field_count; i++) {
+		struct audit_field *f = &rule->fields[i];
+		switch (f->type) {
+		case AUDIT_SE_USER:
+		case AUDIT_SE_ROLE:
+		case AUDIT_SE_TYPE:
+		case AUDIT_SE_SEN:
+		case AUDIT_SE_CLR:
+			return 1;
+		}
+	}
+
+	return 0;
+}
+
+/* This function will re-initialize the se_rule field of all applicable rules.
+ * It will traverse the filter lists serarching for rules that contain selinux
+ * specific filter fields.  When such a rule is found, it is copied, the
+ * selinux field is re-initialized, and the old rule is replaced with the
+ * updated rule. */
+int selinux_audit_rule_update(void)
+{
+	struct audit_entry *entry, *n, *nentry;
+	int i, err = 0;
+
+	/* audit_netlink_mutex synchronizes the writers */
+	mutex_lock(&audit_netlink_mutex);
+
+	for (i = 0; i < AUDIT_NR_FILTERS; i++) {
+		list_for_each_entry_safe(entry, n, &audit_filter_list[i], list) {
+			if (!audit_rule_has_selinux(&entry->rule))
+				continue;
+
+			nentry = audit_dupe_rule(&entry->rule);
+			if (unlikely(IS_ERR(nentry))) {
+				/* save the first error encountered for the
+				 * return value */
+				if (!err)
+					err = PTR_ERR(nentry);
+				audit_panic("error updating selinux filters");
+				list_del_rcu(&entry->list);
+			} else {
+				list_replace_rcu(&entry->list, &nentry->list);
+			}
+			call_rcu(&entry->rcu, audit_free_rule_rcu);
+		}
+	}
+
+	mutex_unlock(&audit_netlink_mutex);
+
+	return err;
+}
diff --git a/kernel/auditsc.c b/kernel/auditsc.c
index 7f160df21a23..1c03a4ed1b27 100644
--- a/kernel/auditsc.c
+++ b/kernel/auditsc.c
@@ -58,6 +58,7 @@
 #include <linux/security.h>
 #include <linux/list.h>
 #include <linux/tty.h>
+#include <linux/selinux.h>
 
 #include "audit.h"
 
@@ -89,7 +90,7 @@ struct audit_names {
 	uid_t		uid;
 	gid_t		gid;
 	dev_t		rdev;
-	char		*ctx;
+	u32		osid;
 };
 
 struct audit_aux_data {
@@ -106,7 +107,7 @@ struct audit_aux_data_ipcctl {
 	uid_t			uid;
 	gid_t			gid;
 	mode_t			mode;
-	char 			*ctx;
+	u32			osid;
 };
 
 struct audit_aux_data_socketcall {
@@ -167,7 +168,8 @@ static int audit_filter_rules(struct task_struct *tsk,
 			      struct audit_context *ctx,
 			      enum audit_state *state)
 {
-	int i, j;
+	int i, j, need_sid = 1;
+	u32 sid;
 
 	for (i = 0; i < rule->field_count; i++) {
 		struct audit_field *f = &rule->fields[i];
@@ -257,6 +259,27 @@ static int audit_filter_rules(struct task_struct *tsk,
 			if (ctx)
 				result = audit_comparator(ctx->loginuid, f->op, f->val);
 			break;
+		case AUDIT_SE_USER:
+		case AUDIT_SE_ROLE:
+		case AUDIT_SE_TYPE:
+		case AUDIT_SE_SEN:
+		case AUDIT_SE_CLR:
+			/* NOTE: this may return negative values indicating
+			   a temporary error.  We simply treat this as a
+			   match for now to avoid losing information that
+			   may be wanted.   An error message will also be
+			   logged upon error */
+			if (f->se_rule) {
+				if (need_sid) {
+					selinux_task_ctxid(tsk, &sid);
+					need_sid = 0;
+				}
+				result = selinux_audit_rule_match(sid, f->type,
+				                                  f->op,
+				                                  f->se_rule,
+				                                  ctx);
+			}
+			break;
 		case AUDIT_ARG0:
 		case AUDIT_ARG1:
 		case AUDIT_ARG2:
@@ -329,7 +352,6 @@ static enum audit_state audit_filter_syscall(struct task_struct *tsk,
 	return AUDIT_BUILD_CONTEXT;
 }
 
-/* This should be called with task_lock() held. */
 static inline struct audit_context *audit_get_context(struct task_struct *tsk,
 						      int return_valid,
 						      int return_code)
@@ -391,9 +413,6 @@ static inline void audit_free_names(struct audit_context *context)
 #endif
 
 	for (i = 0; i < context->name_count; i++) {
-		char *p = context->names[i].ctx;
-		context->names[i].ctx = NULL;
-		kfree(p);
 		if (context->names[i].name)
 			__putname(context->names[i].name);
 	}
@@ -416,11 +435,6 @@ static inline void audit_free_aux(struct audit_context *context)
 			dput(axi->dentry);
 			mntput(axi->mnt);
 		}
-		if ( aux->type == AUDIT_IPC ) {
-			struct audit_aux_data_ipcctl *axi = (void *)aux;
-			if (axi->ctx)
-				kfree(axi->ctx);
-		}
 
 		context->aux = aux->next;
 		kfree(aux);
@@ -506,7 +520,7 @@ static inline void audit_free_context(struct audit_context *context)
 		printk(KERN_ERR "audit: freed %d contexts\n", count);
 }
 
-static void audit_log_task_context(struct audit_buffer *ab, gfp_t gfp_mask)
+static void audit_log_task_context(struct audit_buffer *ab)
 {
 	char *ctx = NULL;
 	ssize_t len = 0;
@@ -518,7 +532,7 @@ static void audit_log_task_context(struct audit_buffer *ab, gfp_t gfp_mask)
 		return;
 	}
 
-	ctx = kmalloc(len, gfp_mask);
+	ctx = kmalloc(len, GFP_KERNEL);
 	if (!ctx)
 		goto error_path;
 
@@ -536,47 +550,46 @@ error_path:
 	return;
 }
 
-static void audit_log_task_info(struct audit_buffer *ab, gfp_t gfp_mask)
+static void audit_log_task_info(struct audit_buffer *ab, struct task_struct *tsk)
 {
-	char name[sizeof(current->comm)];
-	struct mm_struct *mm = current->mm;
+	char name[sizeof(tsk->comm)];
+	struct mm_struct *mm = tsk->mm;
 	struct vm_area_struct *vma;
 
-	get_task_comm(name, current);
+	/* tsk == current */
+
+	get_task_comm(name, tsk);
 	audit_log_format(ab, " comm=");
 	audit_log_untrustedstring(ab, name);
 
-	if (!mm)
-		return;
-
-	/*
-	 * this is brittle; all callers that pass GFP_ATOMIC will have
-	 * NULL current->mm and we won't get here.
-	 */
-	down_read(&mm->mmap_sem);
-	vma = mm->mmap;
-	while (vma) {
-		if ((vma->vm_flags & VM_EXECUTABLE) &&
-		    vma->vm_file) {
-			audit_log_d_path(ab, "exe=",
-					 vma->vm_file->f_dentry,
-					 vma->vm_file->f_vfsmnt);
-			break;
+	if (mm) {
+		down_read(&mm->mmap_sem);
+		vma = mm->mmap;
+		while (vma) {
+			if ((vma->vm_flags & VM_EXECUTABLE) &&
+			    vma->vm_file) {
+				audit_log_d_path(ab, "exe=",
+						 vma->vm_file->f_dentry,
+						 vma->vm_file->f_vfsmnt);
+				break;
+			}
+			vma = vma->vm_next;
 		}
-		vma = vma->vm_next;
+		up_read(&mm->mmap_sem);
 	}
-	up_read(&mm->mmap_sem);
-	audit_log_task_context(ab, gfp_mask);
+	audit_log_task_context(ab);
 }
 
-static void audit_log_exit(struct audit_context *context, gfp_t gfp_mask)
+static void audit_log_exit(struct audit_context *context, struct task_struct *tsk)
 {
-	int i;
+	int i, call_panic = 0;
 	struct audit_buffer *ab;
 	struct audit_aux_data *aux;
 	const char *tty;
 
-	ab = audit_log_start(context, gfp_mask, AUDIT_SYSCALL);
+	/* tsk == current */
+
+	ab = audit_log_start(context, GFP_KERNEL, AUDIT_SYSCALL);
 	if (!ab)
 		return;		/* audit_panic has been called */
 	audit_log_format(ab, "arch=%x syscall=%d",
@@ -587,8 +600,8 @@ static void audit_log_exit(struct audit_context *context, gfp_t gfp_mask)
 		audit_log_format(ab, " success=%s exit=%ld", 
 				 (context->return_valid==AUDITSC_SUCCESS)?"yes":"no",
 				 context->return_code);
-	if (current->signal->tty && current->signal->tty->name)
-		tty = current->signal->tty->name;
+	if (tsk->signal && tsk->signal->tty && tsk->signal->tty->name)
+		tty = tsk->signal->tty->name;
 	else
 		tty = "(none)";
 	audit_log_format(ab,
@@ -607,12 +620,12 @@ static void audit_log_exit(struct audit_context *context, gfp_t gfp_mask)
 		  context->gid,
 		  context->euid, context->suid, context->fsuid,
 		  context->egid, context->sgid, context->fsgid, tty);
-	audit_log_task_info(ab, gfp_mask);
+	audit_log_task_info(ab, tsk);
 	audit_log_end(ab);
 
 	for (aux = context->aux; aux; aux = aux->next) {
 
-		ab = audit_log_start(context, gfp_mask, aux->type);
+		ab = audit_log_start(context, GFP_KERNEL, aux->type);
 		if (!ab)
 			continue; /* audit_panic has been called */
 
@@ -620,8 +633,39 @@ static void audit_log_exit(struct audit_context *context, gfp_t gfp_mask)
 		case AUDIT_IPC: {
 			struct audit_aux_data_ipcctl *axi = (void *)aux;
 			audit_log_format(ab, 
-					 " qbytes=%lx iuid=%u igid=%u mode=%x obj=%s",
-					 axi->qbytes, axi->uid, axi->gid, axi->mode, axi->ctx);
+				 " qbytes=%lx iuid=%u igid=%u mode=%x",
+				 axi->qbytes, axi->uid, axi->gid, axi->mode);
+			if (axi->osid != 0) {
+				char *ctx = NULL;
+				u32 len;
+				if (selinux_ctxid_to_string(
+						axi->osid, &ctx, &len)) {
+					audit_log_format(ab, " osid=%u",
+							axi->osid);
+					call_panic = 1;
+				} else
+					audit_log_format(ab, " obj=%s", ctx);
+				kfree(ctx);
+			}
+			break; }
+
+		case AUDIT_IPC_SET_PERM: {
+			struct audit_aux_data_ipcctl *axi = (void *)aux;
+			audit_log_format(ab,
+				" new qbytes=%lx new iuid=%u new igid=%u new mode=%x",
+				axi->qbytes, axi->uid, axi->gid, axi->mode);
+			if (axi->osid != 0) {
+				char *ctx = NULL;
+				u32 len;
+				if (selinux_ctxid_to_string(
+						axi->osid, &ctx, &len)) {
+					audit_log_format(ab, " osid=%u",
+							axi->osid);
+					call_panic = 1;
+				} else
+					audit_log_format(ab, " obj=%s", ctx);
+				kfree(ctx);
+			}
 			break; }
 
 		case AUDIT_SOCKETCALL: {
@@ -649,7 +693,7 @@ static void audit_log_exit(struct audit_context *context, gfp_t gfp_mask)
 	}
 
 	if (context->pwd && context->pwdmnt) {
-		ab = audit_log_start(context, gfp_mask, AUDIT_CWD);
+		ab = audit_log_start(context, GFP_KERNEL, AUDIT_CWD);
 		if (ab) {
 			audit_log_d_path(ab, "cwd=", context->pwd, context->pwdmnt);
 			audit_log_end(ab);
@@ -659,7 +703,7 @@ static void audit_log_exit(struct audit_context *context, gfp_t gfp_mask)
 		unsigned long ino  = context->names[i].ino;
 		unsigned long pino = context->names[i].pino;
 
-		ab = audit_log_start(context, gfp_mask, AUDIT_PATH);
+		ab = audit_log_start(context, GFP_KERNEL, AUDIT_PATH);
 		if (!ab)
 			continue; /* audit_panic has been called */
 
@@ -685,32 +729,35 @@ static void audit_log_exit(struct audit_context *context, gfp_t gfp_mask)
 					 context->names[i].gid, 
 					 MAJOR(context->names[i].rdev), 
 					 MINOR(context->names[i].rdev));
-		if (context->names[i].ctx) {
-			audit_log_format(ab, " obj=%s",
-					context->names[i].ctx);
+		if (context->names[i].osid != 0) {
+			char *ctx = NULL;
+			u32 len;
+			if (selinux_ctxid_to_string(
+				context->names[i].osid, &ctx, &len)) {
+				audit_log_format(ab, " osid=%u",
+						context->names[i].osid);
+				call_panic = 2;
+			} else
+				audit_log_format(ab, " obj=%s", ctx);
+			kfree(ctx);
 		}
 
 		audit_log_end(ab);
 	}
+	if (call_panic)
+		audit_panic("error converting sid to string");
 }
 
 /**
  * audit_free - free a per-task audit context
  * @tsk: task whose audit context block to free
  *
- * Called from copy_process and __put_task_struct.
+ * Called from copy_process and do_exit
  */
 void audit_free(struct task_struct *tsk)
 {
 	struct audit_context *context;
 
-	/*
-	 * No need to lock the task - when we execute audit_free()
-	 * then the task has no external references anymore, and
-	 * we are tearing it down. (The locking also confuses
-	 * DEBUG_LOCKDEP - this freeing may occur in softirq
-	 * contexts as well, via RCU.)
-	 */
 	context = audit_get_context(tsk, 0, 0);
 	if (likely(!context))
 		return;
@@ -719,8 +766,9 @@ void audit_free(struct task_struct *tsk)
 	 * function (e.g., exit_group), then free context block. 
 	 * We use GFP_ATOMIC here because we might be doing this 
 	 * in the context of the idle thread */
+	/* that can happen only if we are called from do_exit() */
 	if (context->in_syscall && context->auditable)
-		audit_log_exit(context, GFP_ATOMIC);
+		audit_log_exit(context, tsk);
 
 	audit_free_context(context);
 }
@@ -743,10 +791,11 @@ void audit_free(struct task_struct *tsk)
  * will only be written if another part of the kernel requests that it
  * be written).
  */
-void audit_syscall_entry(struct task_struct *tsk, int arch, int major,
+void audit_syscall_entry(int arch, int major,
 			 unsigned long a1, unsigned long a2,
 			 unsigned long a3, unsigned long a4)
 {
+	struct task_struct *tsk = current;
 	struct audit_context *context = tsk->audit_context;
 	enum audit_state     state;
 
@@ -824,22 +873,18 @@ void audit_syscall_entry(struct task_struct *tsk, int arch, int major,
  * message), then write out the syscall information.  In call cases,
  * free the names stored from getname().
  */
-void audit_syscall_exit(struct task_struct *tsk, int valid, long return_code)
+void audit_syscall_exit(int valid, long return_code)
 {
+	struct task_struct *tsk = current;
 	struct audit_context *context;
 
-	get_task_struct(tsk);
-	task_lock(tsk);
 	context = audit_get_context(tsk, valid, return_code);
-	task_unlock(tsk);
 
-	/* Not having a context here is ok, since the parent may have
-	 * called __put_task_struct. */
 	if (likely(!context))
-		goto out;
+		return;
 
 	if (context->in_syscall && context->auditable)
-		audit_log_exit(context, GFP_KERNEL);
+		audit_log_exit(context, tsk);
 
 	context->in_syscall = 0;
 	context->auditable  = 0;
@@ -854,8 +899,6 @@ void audit_syscall_exit(struct task_struct *tsk, int valid, long return_code)
 		audit_free_aux(context);
 		tsk->audit_context = context;
 	}
- out:
-	put_task_struct(tsk);
 }
 
 /**
@@ -936,40 +979,11 @@ void audit_putname(const char *name)
 #endif
 }
 
-void audit_inode_context(int idx, const struct inode *inode)
+static void audit_inode_context(int idx, const struct inode *inode)
 {
 	struct audit_context *context = current->audit_context;
-	const char *suffix = security_inode_xattr_getsuffix();
-	char *ctx = NULL;
-	int len = 0;
-
-	if (!suffix)
-		goto ret;
-
-	len = security_inode_getsecurity(inode, suffix, NULL, 0, 0);
-	if (len == -EOPNOTSUPP)
-		goto ret;
-	if (len < 0) 
-		goto error_path;
-
-	ctx = kmalloc(len, GFP_KERNEL);
-	if (!ctx) 
-		goto error_path;
 
-	len = security_inode_getsecurity(inode, suffix, ctx, len, 0);
-	if (len < 0)
-		goto error_path;
-
-	kfree(context->names[idx].ctx);
-	context->names[idx].ctx = ctx;
-	goto ret;
-
-error_path:
-	if (ctx)
-		kfree(ctx);
-	audit_panic("error in audit_inode_context");
-ret:
-	return;
+	selinux_get_inode_sid(inode, &context->names[idx].osid);
 }
 
 
@@ -1155,40 +1169,37 @@ uid_t audit_get_loginuid(struct audit_context *ctx)
 	return ctx ? ctx->loginuid : -1;
 }
 
-static char *audit_ipc_context(struct kern_ipc_perm *ipcp)
+/**
+ * audit_ipc_obj - record audit data for ipc object
+ * @ipcp: ipc permissions
+ *
+ * Returns 0 for success or NULL context or < 0 on error.
+ */
+int audit_ipc_obj(struct kern_ipc_perm *ipcp)
 {
+	struct audit_aux_data_ipcctl *ax;
 	struct audit_context *context = current->audit_context;
-	char *ctx = NULL;
-	int len = 0;
 
 	if (likely(!context))
-		return NULL;
-
-	len = security_ipc_getsecurity(ipcp, NULL, 0);
-	if (len == -EOPNOTSUPP)
-		goto ret;
-	if (len < 0)
-		goto error_path;
-
-	ctx = kmalloc(len, GFP_ATOMIC);
-	if (!ctx)
-		goto error_path;
+		return 0;
 
-	len = security_ipc_getsecurity(ipcp, ctx, len);
-	if (len < 0)
-		goto error_path;
+	ax = kmalloc(sizeof(*ax), GFP_ATOMIC);
+	if (!ax)
+		return -ENOMEM;
 
-	return ctx;
+	ax->uid = ipcp->uid;
+	ax->gid = ipcp->gid;
+	ax->mode = ipcp->mode;
+	selinux_get_ipc_sid(ipcp, &ax->osid);
 
-error_path:
-	kfree(ctx);
-	audit_panic("error in audit_ipc_context");
-ret:
-	return NULL;
+	ax->d.type = AUDIT_IPC;
+	ax->d.next = context->aux;
+	context->aux = (void *)ax;
+	return 0;
 }
 
 /**
- * audit_ipc_perms - record audit data for ipc
+ * audit_ipc_set_perm - record audit data for new ipc permissions
  * @qbytes: msgq bytes
  * @uid: msgq user id
  * @gid: msgq group id
@@ -1196,7 +1207,7 @@ ret:
  *
  * Returns 0 for success or NULL context or < 0 on error.
  */
-int audit_ipc_perms(unsigned long qbytes, uid_t uid, gid_t gid, mode_t mode, struct kern_ipc_perm *ipcp)
+int audit_ipc_set_perm(unsigned long qbytes, uid_t uid, gid_t gid, mode_t mode, struct kern_ipc_perm *ipcp)
 {
 	struct audit_aux_data_ipcctl *ax;
 	struct audit_context *context = current->audit_context;
@@ -1212,9 +1223,9 @@ int audit_ipc_perms(unsigned long qbytes, uid_t uid, gid_t gid, mode_t mode, str
 	ax->uid = uid;
 	ax->gid = gid;
 	ax->mode = mode;
-	ax->ctx = audit_ipc_context(ipcp);
+	selinux_get_ipc_sid(ipcp, &ax->osid);
 
-	ax->d.type = AUDIT_IPC;
+	ax->d.type = AUDIT_IPC_SET_PERM;
 	ax->d.next = context->aux;
 	context->aux = (void *)ax;
 	return 0;
diff --git a/kernel/cpuset.c b/kernel/cpuset.c
index 72248d1b9e3f..ab81fdd4572b 100644
--- a/kernel/cpuset.c
+++ b/kernel/cpuset.c
@@ -2231,19 +2231,25 @@ static const struct cpuset *nearest_exclusive_ancestor(const struct cpuset *cs)
  * So only GFP_KERNEL allocations, if all nodes in the cpuset are
  * short of memory, might require taking the callback_mutex mutex.
  *
- * The first loop over the zonelist in mm/page_alloc.c:__alloc_pages()
- * calls here with __GFP_HARDWALL always set in gfp_mask, enforcing
- * hardwall cpusets - no allocation on a node outside the cpuset is
- * allowed (unless in interrupt, of course).
- *
- * The second loop doesn't even call here for GFP_ATOMIC requests
- * (if the __alloc_pages() local variable 'wait' is set).  That check
- * and the checks below have the combined affect in the second loop of
- * the __alloc_pages() routine that:
+ * The first call here from mm/page_alloc:get_page_from_freelist()
+ * has __GFP_HARDWALL set in gfp_mask, enforcing hardwall cpusets, so
+ * no allocation on a node outside the cpuset is allowed (unless in
+ * interrupt, of course).
+ *
+ * The second pass through get_page_from_freelist() doesn't even call
+ * here for GFP_ATOMIC calls.  For those calls, the __alloc_pages()
+ * variable 'wait' is not set, and the bit ALLOC_CPUSET is not set
+ * in alloc_flags.  That logic and the checks below have the combined
+ * affect that:
  *	in_interrupt - any node ok (current task context irrelevant)
  *	GFP_ATOMIC   - any node ok
  *	GFP_KERNEL   - any node in enclosing mem_exclusive cpuset ok
  *	GFP_USER     - only nodes in current tasks mems allowed ok.
+ *
+ * Rule:
+ *    Don't call cpuset_zone_allowed() if you can't sleep, unless you
+ *    pass in the __GFP_HARDWALL flag set in gfp_flag, which disables
+ *    the code that might scan up ancestor cpusets and sleep.
  **/
 
 int __cpuset_zone_allowed(struct zone *z, gfp_t gfp_mask)
@@ -2255,6 +2261,7 @@ int __cpuset_zone_allowed(struct zone *z, gfp_t gfp_mask)
 	if (in_interrupt())
 		return 1;
 	node = z->zone_pgdat->node_id;
+	might_sleep_if(!(gfp_mask & __GFP_HARDWALL));
 	if (node_isset(node, current->mems_allowed))
 		return 1;
 	if (gfp_mask & __GFP_HARDWALL)	/* If hardwall request, stop here */
diff --git a/kernel/exit.c b/kernel/exit.c
index 1a9787ac6173..e95b93282210 100644
--- a/kernel/exit.c
+++ b/kernel/exit.c
@@ -35,6 +35,7 @@
 #include <linux/futex.h>
 #include <linux/compat.h>
 #include <linux/pipe_fs_i.h>
+#include <linux/audit.h> /* for audit_free() */
 
 #include <asm/uaccess.h>
 #include <asm/unistd.h>
@@ -56,7 +57,7 @@ static void __unhash_process(struct task_struct *p)
 		detach_pid(p, PIDTYPE_PGID);
 		detach_pid(p, PIDTYPE_SID);
 
-		list_del_init(&p->tasks);
+		list_del_rcu(&p->tasks);
 		__get_cpu_var(process_counts)--;
 	}
 	list_del_rcu(&p->thread_group);
@@ -910,6 +911,8 @@ fastcall NORET_TYPE void do_exit(long code)
 	if (unlikely(tsk->compat_robust_list))
 		compat_exit_robust_list(tsk);
 #endif
+	if (unlikely(tsk->audit_context))
+		audit_free(tsk);
 	exit_mm(tsk);
 
 	exit_sem(tsk);
diff --git a/kernel/extable.c b/kernel/extable.c
index 7501b531ceed..7fe262855317 100644
--- a/kernel/extable.c
+++ b/kernel/extable.c
@@ -40,7 +40,7 @@ const struct exception_table_entry *search_exception_tables(unsigned long addr)
 	return e;
 }
 
-static int core_kernel_text(unsigned long addr)
+int core_kernel_text(unsigned long addr)
 {
 	if (addr >= (unsigned long)_stext &&
 	    addr <= (unsigned long)_etext)
diff --git a/kernel/fork.c b/kernel/fork.c
index 3384eb89cb1c..ac8100e3088a 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -114,8 +114,6 @@ void __put_task_struct(struct task_struct *tsk)
 	WARN_ON(atomic_read(&tsk->usage));
 	WARN_ON(tsk == current);
 
-	if (unlikely(tsk->audit_context))
-		audit_free(tsk);
 	security_task_free(tsk);
 	free_uid(tsk->user);
 	put_group_info(tsk->group_info);
@@ -124,12 +122,6 @@ void __put_task_struct(struct task_struct *tsk)
 		free_task(tsk);
 }
 
-void __put_task_struct_cb(struct rcu_head *rhp)
-{
-	struct task_struct *tsk = container_of(rhp, struct task_struct, rcu);
-	__put_task_struct(tsk);
-}
-
 void __init fork_init(unsigned long mempages)
 {
 #ifndef __HAVE_ARCH_TASK_STRUCT_ALLOCATOR
@@ -186,6 +178,7 @@ static struct task_struct *dup_task_struct(struct task_struct *orig)
 	atomic_set(&tsk->usage,2);
 	atomic_set(&tsk->fs_excl, 0);
 	tsk->btrace_seq = 0;
+	tsk->splice_pipe = NULL;
 	return tsk;
 }
 
@@ -1210,7 +1203,7 @@ static task_t *copy_process(unsigned long clone_flags,
 			attach_pid(p, PIDTYPE_PGID, process_group(p));
 			attach_pid(p, PIDTYPE_SID, p->signal->session);
 
-			list_add_tail(&p->tasks, &init_task.tasks);
+			list_add_tail_rcu(&p->tasks, &init_task.tasks);
 			__get_cpu_var(process_counts)++;
 		}
 		attach_pid(p, PIDTYPE_PID, p->pid);
diff --git a/kernel/hrtimer.c b/kernel/hrtimer.c
index d2a7296c8251..01fa2ae98a85 100644
--- a/kernel/hrtimer.c
+++ b/kernel/hrtimer.c
@@ -456,6 +456,7 @@ hrtimer_start(struct hrtimer *timer, ktime_t tim, const enum hrtimer_mode mode)
 
 	return ret;
 }
+EXPORT_SYMBOL_GPL(hrtimer_start);
 
 /**
  * hrtimer_try_to_cancel - try to deactivate a timer
@@ -484,6 +485,7 @@ int hrtimer_try_to_cancel(struct hrtimer *timer)
 	return ret;
 
 }
+EXPORT_SYMBOL_GPL(hrtimer_try_to_cancel);
 
 /**
  * hrtimer_cancel - cancel a timer and wait for the handler to finish.
@@ -504,6 +506,7 @@ int hrtimer_cancel(struct hrtimer *timer)
 		cpu_relax();
 	}
 }
+EXPORT_SYMBOL_GPL(hrtimer_cancel);
 
 /**
  * hrtimer_get_remaining - get remaining time for the timer
@@ -522,6 +525,7 @@ ktime_t hrtimer_get_remaining(const struct hrtimer *timer)
 
 	return rem;
 }
+EXPORT_SYMBOL_GPL(hrtimer_get_remaining);
 
 #ifdef CONFIG_NO_IDLE_HZ
 /**
@@ -580,6 +584,7 @@ void hrtimer_init(struct hrtimer *timer, clockid_t clock_id,
 	timer->base = &bases[clock_id];
 	timer->node.rb_parent = HRTIMER_INACTIVE;
 }
+EXPORT_SYMBOL_GPL(hrtimer_init);
 
 /**
  * hrtimer_get_res - get the timer resolution for a clock
@@ -599,6 +604,7 @@ int hrtimer_get_res(const clockid_t which_clock, struct timespec *tp)
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(hrtimer_get_res);
 
 /*
  * Expire the per base hrtimer-queue:
@@ -836,7 +842,7 @@ static void migrate_hrtimers(int cpu)
 }
 #endif /* CONFIG_HOTPLUG_CPU */
 
-static int __devinit hrtimer_cpu_notify(struct notifier_block *self,
+static int hrtimer_cpu_notify(struct notifier_block *self,
 					unsigned long action, void *hcpu)
 {
 	long cpu = (long)hcpu;
@@ -860,7 +866,7 @@ static int __devinit hrtimer_cpu_notify(struct notifier_block *self,
 	return NOTIFY_OK;
 }
 
-static struct notifier_block __devinitdata hrtimers_nb = {
+static struct notifier_block hrtimers_nb = {
 	.notifier_call = hrtimer_cpu_notify,
 };
 
diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c
index ac766ad573e8..1279e3499534 100644
--- a/kernel/irq/manage.c
+++ b/kernel/irq/manage.c
@@ -246,8 +246,10 @@ int setup_irq(unsigned int irq, struct irqaction * new)
 
 mismatch:
 	spin_unlock_irqrestore(&desc->lock, flags);
-	printk(KERN_ERR "%s: irq handler mismatch\n", __FUNCTION__);
-	dump_stack();
+	if (!(new->flags & SA_PROBEIRQ)) {
+		printk(KERN_ERR "%s: irq handler mismatch\n", __FUNCTION__);
+		dump_stack();
+	}
 	return -EBUSY;
 }
 
diff --git a/kernel/kprobes.c b/kernel/kprobes.c
index 1156eb0977d0..1fbf466a29aa 100644
--- a/kernel/kprobes.c
+++ b/kernel/kprobes.c
@@ -585,6 +585,9 @@ int __kprobes register_kretprobe(struct kretprobe *rp)
 	int i;
 
 	rp->kp.pre_handler = pre_handler_kretprobe;
+	rp->kp.post_handler = NULL;
+	rp->kp.fault_handler = NULL;
+	rp->kp.break_handler = NULL;
 
 	/* Pre-allocate memory for max kretprobe instances */
 	if (rp->maxactive <= 0) {
diff --git a/kernel/module.c b/kernel/module.c
index d24deb0dbbc9..bbe04862e1b0 100644
--- a/kernel/module.c
+++ b/kernel/module.c
@@ -705,14 +705,14 @@ EXPORT_SYMBOL(__symbol_put);
 
 void symbol_put_addr(void *addr)
 {
-	unsigned long flags;
+	struct module *modaddr;
 
-	spin_lock_irqsave(&modlist_lock, flags);
-	if (!kernel_text_address((unsigned long)addr))
-		BUG();
+	if (core_kernel_text((unsigned long)addr))
+		return;
 
-	module_put(module_text_address((unsigned long)addr));
-	spin_unlock_irqrestore(&modlist_lock, flags);
+	if (!(modaddr = module_text_address((unsigned long)addr)))
+		BUG();
+	module_put(modaddr);
 }
 EXPORT_SYMBOL_GPL(symbol_put_addr);
 
diff --git a/kernel/power/main.c b/kernel/power/main.c
index ee371f50ccaa..a6d9ef46009e 100644
--- a/kernel/power/main.c
+++ b/kernel/power/main.c
@@ -272,7 +272,7 @@ static ssize_t state_store(struct subsystem * subsys, const char * buf, size_t n
 		if (*s && !strncmp(buf, *s, len))
 			break;
 	}
-	if (*s)
+	if (state < PM_SUSPEND_MAX && *s)
 		error = enter_state(state);
 	else
 		error = -EINVAL;
diff --git a/kernel/power/pm.c b/kernel/power/pm.c
index 0f6908cce1dd..84063ac8fcfc 100644
--- a/kernel/power/pm.c
+++ b/kernel/power/pm.c
@@ -75,25 +75,6 @@ struct pm_dev *pm_register(pm_dev_t type,
 	return dev;
 }
 
-/**
- *	pm_unregister -  unregister a device with power management
- *	@dev: device to unregister
- *
- *	Remove a device from the power management notification lists. The
- *	dev passed must be a handle previously returned by pm_register.
- */
- 
-void pm_unregister(struct pm_dev *dev)
-{
-	if (dev) {
-		mutex_lock(&pm_devs_lock);
-		list_del(&dev->entry);
-		mutex_unlock(&pm_devs_lock);
-
-		kfree(dev);
-	}
-}
-
 static void __pm_unregister(struct pm_dev *dev)
 {
 	if (dev) {
@@ -258,7 +239,6 @@ int pm_send_all(pm_request_t rqst, void *data)
 }
 
 EXPORT_SYMBOL(pm_register);
-EXPORT_SYMBOL(pm_unregister);
 EXPORT_SYMBOL(pm_unregister_all);
 EXPORT_SYMBOL(pm_send_all);
 EXPORT_SYMBOL(pm_active);
diff --git a/kernel/power/snapshot.c b/kernel/power/snapshot.c
index c5863d02c89e..3eeedbb13b78 100644
--- a/kernel/power/snapshot.c
+++ b/kernel/power/snapshot.c
@@ -240,14 +240,15 @@ static void copy_data_pages(struct pbe *pblist)
  *	free_pagedir - free pages allocated with alloc_pagedir()
  */
 
-static void free_pagedir(struct pbe *pblist)
+static void free_pagedir(struct pbe *pblist, int clear_nosave_free)
 {
 	struct pbe *pbe;
 
 	while (pblist) {
 		pbe = (pblist + PB_PAGE_SKIP)->next;
 		ClearPageNosave(virt_to_page(pblist));
-		ClearPageNosaveFree(virt_to_page(pblist));
+		if (clear_nosave_free)
+			ClearPageNosaveFree(virt_to_page(pblist));
 		free_page((unsigned long)pblist);
 		pblist = pbe;
 	}
@@ -389,7 +390,7 @@ struct pbe *alloc_pagedir(unsigned int nr_pages, gfp_t gfp_mask, int safe_needed
 		pbe->next = alloc_image_page(gfp_mask, safe_needed);
 	}
 	if (!pbe) { /* get_zeroed_page() failed */
-		free_pagedir(pblist);
+		free_pagedir(pblist, 1);
 		pblist = NULL;
         } else
 		create_pbe_list(pblist, nr_pages);
@@ -736,7 +737,7 @@ static int create_image(struct snapshot_handle *handle)
 		pblist = alloc_pagedir(nr_copy_pages, GFP_ATOMIC, 1);
 		if (pblist)
 			copy_page_backup_list(pblist, p);
-		free_pagedir(p);
+		free_pagedir(p, 0);
 		if (!pblist)
 			error = -ENOMEM;
 	}
diff --git a/kernel/profile.c b/kernel/profile.c
index 5a730fdb1a2c..68afe121e507 100644
--- a/kernel/profile.c
+++ b/kernel/profile.c
@@ -299,7 +299,7 @@ out:
 }
 
 #ifdef CONFIG_HOTPLUG_CPU
-static int __devinit profile_cpu_callback(struct notifier_block *info,
+static int profile_cpu_callback(struct notifier_block *info,
 					unsigned long action, void *__cpu)
 {
 	int node, cpu = (unsigned long)__cpu;
diff --git a/kernel/ptrace.c b/kernel/ptrace.c
index 0eeb7e66722c..921c22ad16e4 100644
--- a/kernel/ptrace.c
+++ b/kernel/ptrace.c
@@ -56,10 +56,6 @@ void ptrace_untrace(task_t *child)
 			signal_wake_up(child, 1);
 		}
 	}
-	if (child->signal->flags & SIGNAL_GROUP_EXIT) {
-		sigaddset(&child->pending.signal, SIGKILL);
-		signal_wake_up(child, 1);
-	}
 	spin_unlock(&child->sighand->siglock);
 }
 
@@ -81,7 +77,8 @@ void __ptrace_unlink(task_t *child)
 		add_parent(child);
 	}
 
-	ptrace_untrace(child);
+	if (child->state == TASK_TRACED)
+		ptrace_untrace(child);
 }
 
 /*
@@ -151,12 +148,34 @@ int ptrace_may_attach(struct task_struct *task)
 int ptrace_attach(struct task_struct *task)
 {
 	int retval;
-	task_lock(task);
+
 	retval = -EPERM;
 	if (task->pid <= 1)
-		goto bad;
+		goto out;
 	if (task->tgid == current->tgid)
-		goto bad;
+		goto out;
+
+repeat:
+	/*
+	 * Nasty, nasty.
+	 *
+	 * We want to hold both the task-lock and the
+	 * tasklist_lock for writing at the same time.
+	 * But that's against the rules (tasklist_lock
+	 * is taken for reading by interrupts on other
+	 * cpu's that may have task_lock).
+	 */
+	task_lock(task);
+	local_irq_disable();
+	if (!write_trylock(&tasklist_lock)) {
+		local_irq_enable();
+		task_unlock(task);
+		do {
+			cpu_relax();
+		} while (!write_can_lock(&tasklist_lock));
+		goto repeat;
+	}
+
 	/* the same process cannot be attached many times */
 	if (task->ptrace & PT_PTRACED)
 		goto bad;
@@ -169,17 +188,15 @@ int ptrace_attach(struct task_struct *task)
 				      ? PT_ATTACHED : 0);
 	if (capable(CAP_SYS_PTRACE))
 		task->ptrace |= PT_PTRACE_CAP;
-	task_unlock(task);
 
-	write_lock_irq(&tasklist_lock);
 	__ptrace_link(task, current);
-	write_unlock_irq(&tasklist_lock);
 
 	force_sig_specific(SIGSTOP, task);
-	return 0;
 
 bad:
+	write_unlock_irq(&tasklist_lock);
 	task_unlock(task);
+out:
 	return retval;
 }
 
@@ -420,21 +437,22 @@ int ptrace_request(struct task_struct *child, long request,
  */
 int ptrace_traceme(void)
 {
-	int ret;
+	int ret = -EPERM;
 
 	/*
 	 * Are we already being traced?
 	 */
-	if (current->ptrace & PT_PTRACED)
-		return -EPERM;
-	ret = security_ptrace(current->parent, current);
-	if (ret)
-		return -EPERM;
-	/*
-	 * Set the ptrace bit in the process ptrace flags.
-	 */
-	current->ptrace |= PT_PTRACED;
-	return 0;
+	task_lock(current);
+	if (!(current->ptrace & PT_PTRACED)) {
+		ret = security_ptrace(current->parent, current);
+		/*
+		 * Set the ptrace bit in the process ptrace flags.
+		 */
+		if (!ret)
+			current->ptrace |= PT_PTRACED;
+	}
+	task_unlock(current);
+	return ret;
 }
 
 /**
diff --git a/kernel/rcupdate.c b/kernel/rcupdate.c
index 13458bbaa1be..2058f88c7bbb 100644
--- a/kernel/rcupdate.c
+++ b/kernel/rcupdate.c
@@ -479,12 +479,31 @@ static int __rcu_pending(struct rcu_ctrlblk *rcp, struct rcu_data *rdp)
 	return 0;
 }
 
+/*
+ * Check to see if there is any immediate RCU-related work to be done
+ * by the current CPU, returning 1 if so.  This function is part of the
+ * RCU implementation; it is -not- an exported member of the RCU API.
+ */
 int rcu_pending(int cpu)
 {
 	return __rcu_pending(&rcu_ctrlblk, &per_cpu(rcu_data, cpu)) ||
 		__rcu_pending(&rcu_bh_ctrlblk, &per_cpu(rcu_bh_data, cpu));
 }
 
+/*
+ * Check to see if any future RCU-related work will need to be done
+ * by the current CPU, even if none need be done immediately, returning
+ * 1 if so.  This function is part of the RCU implementation; it is -not-
+ * an exported member of the RCU API.
+ */
+int rcu_needs_cpu(int cpu)
+{
+	struct rcu_data *rdp = &per_cpu(rcu_data, cpu);
+	struct rcu_data *rdp_bh = &per_cpu(rcu_bh_data, cpu);
+
+	return (!!rdp->curlist || !!rdp_bh->curlist || rcu_pending(cpu));
+}
+
 void rcu_check_callbacks(int cpu, int user)
 {
 	if (user || 
@@ -520,7 +539,7 @@ static void __devinit rcu_online_cpu(int cpu)
 	tasklet_init(&per_cpu(rcu_tasklet, cpu), rcu_process_callbacks, 0UL);
 }
 
-static int __devinit rcu_cpu_notify(struct notifier_block *self, 
+static int rcu_cpu_notify(struct notifier_block *self,
 				unsigned long action, void *hcpu)
 {
 	long cpu = (long)hcpu;
@@ -537,7 +556,7 @@ static int __devinit rcu_cpu_notify(struct notifier_block *self,
 	return NOTIFY_OK;
 }
 
-static struct notifier_block __devinitdata rcu_nb = {
+static struct notifier_block rcu_nb = {
 	.notifier_call	= rcu_cpu_notify,
 };
 
diff --git a/kernel/sched.c b/kernel/sched.c
index 365f0b90b4de..c13f1bd2df7d 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -665,55 +665,13 @@ static int effective_prio(task_t *p)
 }
 
 /*
- * We place interactive tasks back into the active array, if possible.
- *
- * To guarantee that this does not starve expired tasks we ignore the
- * interactivity of a task if the first expired task had to wait more
- * than a 'reasonable' amount of time. This deadline timeout is
- * load-dependent, as the frequency of array switched decreases with
- * increasing number of running tasks. We also ignore the interactivity
- * if a better static_prio task has expired, and switch periodically
- * regardless, to ensure that highly interactive tasks do not starve
- * the less fortunate for unreasonably long periods.
- */
-static inline int expired_starving(runqueue_t *rq)
-{
-	int limit;
-
-	/*
-	 * Arrays were recently switched, all is well
-	 */
-	if (!rq->expired_timestamp)
-		return 0;
-
-	limit = STARVATION_LIMIT * rq->nr_running;
-
-	/*
-	 * It's time to switch arrays
-	 */
-	if (jiffies - rq->expired_timestamp >= limit)
-		return 1;
-
-	/*
-	 * There's a better selection in the expired array
-	 */
-	if (rq->curr->static_prio > rq->best_expired_prio)
-		return 1;
-
-	/*
-	 * All is well
-	 */
-	return 0;
-}
-
-/*
  * __activate_task - move a task to the runqueue.
  */
 static void __activate_task(task_t *p, runqueue_t *rq)
 {
 	prio_array_t *target = rq->active;
 
-	if (unlikely(batch_task(p) || (expired_starving(rq) && !rt_task(p))))
+	if (batch_task(p))
 		target = rq->expired;
 	enqueue_task(p, target);
 	rq->nr_running++;
@@ -2532,6 +2490,22 @@ unsigned long long current_sched_time(const task_t *tsk)
 }
 
 /*
+ * We place interactive tasks back into the active array, if possible.
+ *
+ * To guarantee that this does not starve expired tasks we ignore the
+ * interactivity of a task if the first expired task had to wait more
+ * than a 'reasonable' amount of time. This deadline timeout is
+ * load-dependent, as the frequency of array switched decreases with
+ * increasing number of running tasks. We also ignore the interactivity
+ * if a better static_prio task has expired:
+ */
+#define EXPIRED_STARVING(rq) \
+	((STARVATION_LIMIT && ((rq)->expired_timestamp && \
+		(jiffies - (rq)->expired_timestamp >= \
+			STARVATION_LIMIT * ((rq)->nr_running) + 1))) || \
+			((rq)->curr->static_prio > (rq)->best_expired_prio))
+
+/*
  * Account user cpu time to a process.
  * @p: the process that the cpu time gets accounted to
  * @hardirq_offset: the offset to subtract from hardirq_count()
@@ -2666,7 +2640,7 @@ void scheduler_tick(void)
 
 		if (!rq->expired_timestamp)
 			rq->expired_timestamp = jiffies;
-		if (!TASK_INTERACTIVE(p) || expired_starving(rq)) {
+		if (!TASK_INTERACTIVE(p) || EXPIRED_STARVING(rq)) {
 			enqueue_task(p, rq->expired);
 			if (p->static_prio < rq->best_expired_prio)
 				rq->best_expired_prio = p->static_prio;
@@ -4814,7 +4788,7 @@ static int migration_call(struct notifier_block *nfb, unsigned long action,
 /* Register at highest priority so that task migration (migrate_all_tasks)
  * happens before everything else.
  */
-static struct notifier_block __devinitdata migration_notifier = {
+static struct notifier_block migration_notifier = {
 	.notifier_call = migration_call,
 	.priority = 10
 };
diff --git a/kernel/signal.c b/kernel/signal.c
index b14f895027c3..e5f8aea78ffe 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -1754,9 +1754,9 @@ relock:
 			/* Let the debugger run.  */
 			ptrace_stop(signr, signr, info);
 
-			/* We're back.  Did the debugger cancel the sig or group_exit? */
+			/* We're back.  Did the debugger cancel the sig?  */
 			signr = current->exit_code;
-			if (signr == 0 || current->signal->flags & SIGNAL_GROUP_EXIT)
+			if (signr == 0)
 				continue;
 
 			current->exit_code = 0;
diff --git a/kernel/softirq.c b/kernel/softirq.c
index ec8fed42a86f..336f92d64e2e 100644
--- a/kernel/softirq.c
+++ b/kernel/softirq.c
@@ -446,7 +446,7 @@ static void takeover_tasklets(unsigned int cpu)
 }
 #endif /* CONFIG_HOTPLUG_CPU */
 
-static int __devinit cpu_callback(struct notifier_block *nfb,
+static int cpu_callback(struct notifier_block *nfb,
 				  unsigned long action,
 				  void *hcpu)
 {
@@ -484,7 +484,7 @@ static int __devinit cpu_callback(struct notifier_block *nfb,
 	return NOTIFY_OK;
 }
 
-static struct notifier_block __devinitdata cpu_nfb = {
+static struct notifier_block cpu_nfb = {
 	.notifier_call = cpu_callback
 };
 
diff --git a/kernel/softlockup.c b/kernel/softlockup.c
index ced91e1ff564..14c7faf02909 100644
--- a/kernel/softlockup.c
+++ b/kernel/softlockup.c
@@ -104,7 +104,7 @@ static int watchdog(void * __bind_cpu)
 /*
  * Create/destroy watchdog threads as CPUs come and go:
  */
-static int __devinit
+static int
 cpu_callback(struct notifier_block *nfb, unsigned long action, void *hcpu)
 {
 	int hotcpu = (unsigned long)hcpu;
@@ -140,7 +140,7 @@ cpu_callback(struct notifier_block *nfb, unsigned long action, void *hcpu)
 	return NOTIFY_OK;
 }
 
-static struct notifier_block __devinitdata cpu_nfb = {
+static struct notifier_block cpu_nfb = {
 	.notifier_call = cpu_callback
 };
 
diff --git a/kernel/timer.c b/kernel/timer.c
index 883773788836..9e49deed468c 100644
--- a/kernel/timer.c
+++ b/kernel/timer.c
@@ -541,6 +541,22 @@ found:
 	}
 	spin_unlock(&base->lock);
 
+	/*
+	 * It can happen that other CPUs service timer IRQs and increment
+	 * jiffies, but we have not yet got a local timer tick to process
+	 * the timer wheels.  In that case, the expiry time can be before
+	 * jiffies, but since the high-resolution timer here is relative to
+	 * jiffies, the default expression when high-resolution timers are
+	 * not active,
+	 *
+	 *   time_before(MAX_JIFFY_OFFSET + jiffies, expires)
+	 *
+	 * would falsely evaluate to true.  If that is the case, just
+	 * return jiffies so that we can immediately fire the local timer
+	 */
+	if (time_before(expires, jiffies))
+		return jiffies;
+
 	if (time_before(hr_expires, expires))
 		return hr_expires;
 
@@ -1314,7 +1330,7 @@ static void __devinit migrate_timers(int cpu)
 }
 #endif /* CONFIG_HOTPLUG_CPU */
 
-static int __devinit timer_cpu_notify(struct notifier_block *self, 
+static int timer_cpu_notify(struct notifier_block *self,
 				unsigned long action, void *hcpu)
 {
 	long cpu = (long)hcpu;
@@ -1334,7 +1350,7 @@ static int __devinit timer_cpu_notify(struct notifier_block *self,
 	return NOTIFY_OK;
 }
 
-static struct notifier_block __devinitdata timers_nb = {
+static struct notifier_block timers_nb = {
 	.notifier_call	= timer_cpu_notify,
 };
 
diff --git a/kernel/uid16.c b/kernel/uid16.c
index aa25605027c8..187e2a423878 100644
--- a/kernel/uid16.c
+++ b/kernel/uid16.c
@@ -20,43 +20,67 @@
 
 asmlinkage long sys_chown16(const char __user * filename, old_uid_t user, old_gid_t group)
 {
-	return sys_chown(filename, low2highuid(user), low2highgid(group));
+	long ret = sys_chown(filename, low2highuid(user), low2highgid(group));
+	/* avoid REGPARM breakage on x86: */
+	prevent_tail_call(ret);
+	return ret;
 }
 
 asmlinkage long sys_lchown16(const char __user * filename, old_uid_t user, old_gid_t group)
 {
-	return sys_lchown(filename, low2highuid(user), low2highgid(group));
+	long ret = sys_lchown(filename, low2highuid(user), low2highgid(group));
+	/* avoid REGPARM breakage on x86: */
+	prevent_tail_call(ret);
+	return ret;
 }
 
 asmlinkage long sys_fchown16(unsigned int fd, old_uid_t user, old_gid_t group)
 {
-	return sys_fchown(fd, low2highuid(user), low2highgid(group));
+	long ret = sys_fchown(fd, low2highuid(user), low2highgid(group));
+	/* avoid REGPARM breakage on x86: */
+	prevent_tail_call(ret);
+	return ret;
 }
 
 asmlinkage long sys_setregid16(old_gid_t rgid, old_gid_t egid)
 {
-	return sys_setregid(low2highgid(rgid), low2highgid(egid));
+	long ret = sys_setregid(low2highgid(rgid), low2highgid(egid));
+	/* avoid REGPARM breakage on x86: */
+	prevent_tail_call(ret);
+	return ret;
 }
 
 asmlinkage long sys_setgid16(old_gid_t gid)
 {
-	return sys_setgid(low2highgid(gid));
+	long ret = sys_setgid(low2highgid(gid));
+	/* avoid REGPARM breakage on x86: */
+	prevent_tail_call(ret);
+	return ret;
 }
 
 asmlinkage long sys_setreuid16(old_uid_t ruid, old_uid_t euid)
 {
-	return sys_setreuid(low2highuid(ruid), low2highuid(euid));
+	long ret = sys_setreuid(low2highuid(ruid), low2highuid(euid));
+	/* avoid REGPARM breakage on x86: */
+	prevent_tail_call(ret);
+	return ret;
 }
 
 asmlinkage long sys_setuid16(old_uid_t uid)
 {
-	return sys_setuid(low2highuid(uid));
+	long ret = sys_setuid(low2highuid(uid));
+	/* avoid REGPARM breakage on x86: */
+	prevent_tail_call(ret);
+	return ret;
 }
 
 asmlinkage long sys_setresuid16(old_uid_t ruid, old_uid_t euid, old_uid_t suid)
 {
-	return sys_setresuid(low2highuid(ruid), low2highuid(euid),
-		low2highuid(suid));
+	long ret = sys_setresuid(low2highuid(ruid), low2highuid(euid),
+				 low2highuid(suid));
+	/* avoid REGPARM breakage on x86: */
+	prevent_tail_call(ret);
+	return ret;
 }
 
 asmlinkage long sys_getresuid16(old_uid_t __user *ruid, old_uid_t __user *euid, old_uid_t __user *suid)
@@ -72,8 +96,11 @@ asmlinkage long sys_getresuid16(old_uid_t __user *ruid, old_uid_t __user *euid,
 
 asmlinkage long sys_setresgid16(old_gid_t rgid, old_gid_t egid, old_gid_t sgid)
 {
-	return sys_setresgid(low2highgid(rgid), low2highgid(egid),
-		low2highgid(sgid));
+	long ret = sys_setresgid(low2highgid(rgid), low2highgid(egid),
+				 low2highgid(sgid));
+	/* avoid REGPARM breakage on x86: */
+	prevent_tail_call(ret);
+	return ret;
 }
 
 asmlinkage long sys_getresgid16(old_gid_t __user *rgid, old_gid_t __user *egid, old_gid_t __user *sgid)
@@ -89,12 +116,18 @@ asmlinkage long sys_getresgid16(old_gid_t __user *rgid, old_gid_t __user *egid,
 
 asmlinkage long sys_setfsuid16(old_uid_t uid)
 {
-	return sys_setfsuid(low2highuid(uid));
+	long ret = sys_setfsuid(low2highuid(uid));
+	/* avoid REGPARM breakage on x86: */
+	prevent_tail_call(ret);
+	return ret;
 }
 
 asmlinkage long sys_setfsgid16(old_gid_t gid)
 {
-	return sys_setfsgid(low2highgid(gid));
+	long ret = sys_setfsgid(low2highgid(gid));
+	/* avoid REGPARM breakage on x86: */
+	prevent_tail_call(ret);
+	return ret;
 }
 
 static int groups16_to_user(old_gid_t __user *grouplist,
diff --git a/kernel/workqueue.c b/kernel/workqueue.c
index e9e464a90376..880fb415a8f6 100644
--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -547,7 +547,7 @@ static void take_over_work(struct workqueue_struct *wq, unsigned int cpu)
 }
 
 /* We're holding the cpucontrol mutex here */
-static int __devinit workqueue_cpu_callback(struct notifier_block *nfb,
+static int workqueue_cpu_callback(struct notifier_block *nfb,
 				  unsigned long action,
 				  void *hcpu)
 {
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index d57fd9181b18..ccb0c1fdf1b5 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -101,7 +101,7 @@ config DEBUG_PREEMPT
 
 config DEBUG_MUTEXES
 	bool "Mutex debugging, deadlock detection"
-	default y
+	default n
 	depends on DEBUG_KERNEL
 	help
 	 This allows mutex semantics violations and mutex related deadlocks
@@ -189,7 +189,7 @@ config FRAME_POINTER
 config UNWIND_INFO
 	bool "Compile the kernel with frame unwind information"
 	depends on !IA64
-	depends on !MODULES || !(MIPS || PARISC || PPC || SUPERH || SPARC64 || V850)
+	depends on !MODULES || !(MIPS || PARISC || PPC || SUPERH || V850)
 	help
 	  If you say Y here the resulting kernel image will be slightly larger
 	  but not slower, and it will give very useful debugging information.
diff --git a/lib/kobject.c b/lib/kobject.c
index 25204a41a9b0..687ab418d292 100644
--- a/lib/kobject.c
+++ b/lib/kobject.c
@@ -128,6 +128,7 @@ void kobject_init(struct kobject * kobj)
 {
 	kref_init(&kobj->kref);
 	INIT_LIST_HEAD(&kobj->entry);
+	init_waitqueue_head(&kobj->poll);
 	kobj->kset = kset_get(kobj->kset);
 }
 
@@ -197,14 +198,14 @@ int kobject_add(struct kobject * kobj)
 
 		/* be noisy on error issues */
 		if (error == -EEXIST)
-			printk("kobject_add failed for %s with -EEXIST, "
+			pr_debug("kobject_add failed for %s with -EEXIST, "
 			       "don't try to register things with the "
 			       "same name in the same directory.\n",
 			       kobject_name(kobj));
 		else
-			printk("kobject_add failed for %s (%d)\n",
+			pr_debug("kobject_add failed for %s (%d)\n",
 			       kobject_name(kobj), error);
-		dump_stack();
+		/* dump_stack(); */
 	}
 
 	return error;
@@ -421,7 +422,6 @@ struct kobject *kobject_add_dir(struct kobject *parent, const char *name)
 
 	return k;
 }
-EXPORT_SYMBOL_GPL(kobject_add_dir);
 
 /**
  *	kset_init - initialize a kset for use
@@ -568,7 +568,7 @@ int subsys_create_file(struct subsystem * s, struct subsys_attribute * a)
  *	@s:	subsystem.
  *	@a:	attribute desciptor.
  */
-
+#if 0
 void subsys_remove_file(struct subsystem * s, struct subsys_attribute * a)
 {
 	if (subsys_get(s)) {
@@ -576,6 +576,7 @@ void subsys_remove_file(struct subsystem * s, struct subsys_attribute * a)
 		subsys_put(s);
 	}
 }
+#endif  /*  0  */
 
 EXPORT_SYMBOL(kobject_init);
 EXPORT_SYMBOL(kobject_register);
@@ -587,10 +588,7 @@ EXPORT_SYMBOL(kobject_del);
 
 EXPORT_SYMBOL(kset_register);
 EXPORT_SYMBOL(kset_unregister);
-EXPORT_SYMBOL(kset_find_obj);
 
-EXPORT_SYMBOL(subsystem_init);
 EXPORT_SYMBOL(subsystem_register);
 EXPORT_SYMBOL(subsystem_unregister);
 EXPORT_SYMBOL(subsys_create_file);
-EXPORT_SYMBOL(subsys_remove_file);
diff --git a/lib/kobject_uevent.c b/lib/kobject_uevent.c
index 982226daf939..7f20e7b857cb 100644
--- a/lib/kobject_uevent.c
+++ b/lib/kobject_uevent.c
@@ -25,11 +25,13 @@
 #define BUFFER_SIZE	2048	/* buffer for the variables */
 #define NUM_ENVP	32	/* number of env pointers */
 
-#if defined(CONFIG_HOTPLUG) && defined(CONFIG_NET)
+#if defined(CONFIG_HOTPLUG)
 u64 uevent_seqnum;
 char uevent_helper[UEVENT_HELPER_PATH_LEN] = "/sbin/hotplug";
 static DEFINE_SPINLOCK(sequence_lock);
+#if defined(CONFIG_NET)
 static struct sock *uevent_sock;
+#endif
 
 static char *action_to_string(enum kobject_action action)
 {
@@ -155,6 +157,7 @@ void kobject_uevent(struct kobject *kobj, enum kobject_action action)
 	spin_unlock(&sequence_lock);
 	sprintf(seq_buff, "SEQNUM=%llu", (unsigned long long)seq);
 
+#if defined(CONFIG_NET)
 	/* send netlink message */
 	if (uevent_sock) {
 		struct sk_buff *skb;
@@ -179,6 +182,7 @@ void kobject_uevent(struct kobject *kobj, enum kobject_action action)
 			netlink_broadcast(uevent_sock, skb, 0, 1, GFP_KERNEL);
 		}
 	}
+#endif
 
 	/* call uevent_helper, usually only enabled during early boot */
 	if (uevent_helper[0]) {
@@ -249,6 +253,7 @@ int add_uevent_var(char **envp, int num_envp, int *cur_index,
 }
 EXPORT_SYMBOL_GPL(add_uevent_var);
 
+#if defined(CONFIG_NET)
 static int __init kobject_uevent_init(void)
 {
 	uevent_sock = netlink_kernel_create(NETLINK_KOBJECT_UEVENT, 1, NULL,
@@ -264,5 +269,6 @@ static int __init kobject_uevent_init(void)
 }
 
 postcore_initcall(kobject_uevent_init);
+#endif
 
 #endif /* CONFIG_HOTPLUG */
diff --git a/mm/filemap.c b/mm/filemap.c
index 3ef20739e725..fd57442186cb 100644
--- a/mm/filemap.c
+++ b/mm/filemap.c
@@ -697,6 +697,38 @@ unsigned find_get_pages(struct address_space *mapping, pgoff_t start,
 	return ret;
 }
 
+/**
+ * find_get_pages_contig - gang contiguous pagecache lookup
+ * @mapping:	The address_space to search
+ * @index:	The starting page index
+ * @nr_pages:	The maximum number of pages
+ * @pages:	Where the resulting pages are placed
+ *
+ * find_get_pages_contig() works exactly like find_get_pages(), except
+ * that the returned number of pages are guaranteed to be contiguous.
+ *
+ * find_get_pages_contig() returns the number of pages which were found.
+ */
+unsigned find_get_pages_contig(struct address_space *mapping, pgoff_t index,
+			       unsigned int nr_pages, struct page **pages)
+{
+	unsigned int i;
+	unsigned int ret;
+
+	read_lock_irq(&mapping->tree_lock);
+	ret = radix_tree_gang_lookup(&mapping->page_tree,
+				(void **)pages, index, nr_pages);
+	for (i = 0; i < ret; i++) {
+		if (pages[i]->mapping == NULL || pages[i]->index != index)
+			break;
+
+		page_cache_get(pages[i]);
+		index++;
+	}
+	read_unlock_irq(&mapping->tree_lock);
+	return i;
+}
+
 /*
  * Like find_get_pages, except we only return pages which are tagged with
  * `tag'.   We update *index to index the next page for the traversal.
diff --git a/mm/madvise.c b/mm/madvise.c
index af3d573b0141..4e196155a0c3 100644
--- a/mm/madvise.c
+++ b/mm/madvise.c
@@ -168,6 +168,9 @@ static long madvise_remove(struct vm_area_struct *vma,
 			return -EINVAL;
 	}
 
+	if ((vma->vm_flags & (VM_SHARED|VM_WRITE)) != (VM_SHARED|VM_WRITE))
+		return -EACCES;
+
 	mapping = vma->vm_file->f_mapping;
 
 	offset = (loff_t)(start - vma->vm_start)
diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
index 1fe76d963ac2..70df5c0d957e 100644
--- a/mm/memory_hotplug.c
+++ b/mm/memory_hotplug.c
@@ -69,12 +69,16 @@ int __add_pages(struct zone *zone, unsigned long phys_start_pfn,
 	for (i = 0; i < nr_pages; i += PAGES_PER_SECTION) {
 		err = __add_section(zone, phys_start_pfn + i);
 
-		if (err)
+		/* We want to keep adding the rest of the
+		 * sections if the first ones already exist
+		 */
+		if (err && (err != -EEXIST))
 			break;
 	}
 
 	return err;
 }
+EXPORT_SYMBOL_GPL(__add_pages);
 
 static void grow_zone_span(struct zone *zone,
 		unsigned long start_pfn, unsigned long end_pfn)
@@ -87,8 +91,8 @@ static void grow_zone_span(struct zone *zone,
 	if (start_pfn < zone->zone_start_pfn)
 		zone->zone_start_pfn = start_pfn;
 
-	if (end_pfn > old_zone_end_pfn)
-		zone->spanned_pages = end_pfn - zone->zone_start_pfn;
+	zone->spanned_pages = max(old_zone_end_pfn, end_pfn) -
+				zone->zone_start_pfn;
 
 	zone_span_writeunlock(zone);
 }
@@ -102,8 +106,8 @@ static void grow_pgdat_span(struct pglist_data *pgdat,
 	if (start_pfn < pgdat->node_start_pfn)
 		pgdat->node_start_pfn = start_pfn;
 
-	if (end_pfn > old_pgdat_end_pfn)
-		pgdat->node_spanned_pages = end_pfn - pgdat->node_start_pfn;
+	pgdat->node_spanned_pages = max(old_pgdat_end_pfn, end_pfn) -
+					pgdat->node_start_pfn;
 }
 
 int online_pages(unsigned long pfn, unsigned long nr_pages)
diff --git a/mm/mempolicy.c b/mm/mempolicy.c
index dec8249e972d..8778f58880c4 100644
--- a/mm/mempolicy.c
+++ b/mm/mempolicy.c
@@ -1761,7 +1761,6 @@ static void gather_stats(struct page *page, void *private, int pte_dirty)
 		md->mapcount_max = count;
 
 	md->node[page_to_nid(page)]++;
-	cond_resched();
 }
 
 #ifdef CONFIG_HUGETLB_PAGE
diff --git a/mm/migrate.c b/mm/migrate.c
index d444229f2599..1c25040693d2 100644
--- a/mm/migrate.c
+++ b/mm/migrate.c
@@ -439,6 +439,17 @@ redo:
 			goto unlock_both;
                 }
 
+		/* Make sure the dirty bit is up to date */
+		if (try_to_unmap(page, 1) == SWAP_FAIL) {
+			rc = -EPERM;
+			goto unlock_both;
+		}
+
+		if (page_mapcount(page)) {
+			rc = -EAGAIN;
+			goto unlock_both;
+		}
+
 		/*
 		 * Default handling if a filesystem does not provide
 		 * a migration function. We can only migrate clean
diff --git a/mm/oom_kill.c b/mm/oom_kill.c
index 78747afad6b0..042e6436c3ee 100644
--- a/mm/oom_kill.c
+++ b/mm/oom_kill.c
@@ -46,15 +46,25 @@
 unsigned long badness(struct task_struct *p, unsigned long uptime)
 {
 	unsigned long points, cpu_time, run_time, s;
-	struct list_head *tsk;
+	struct mm_struct *mm;
+	struct task_struct *child;
 
-	if (!p->mm)
+	task_lock(p);
+	mm = p->mm;
+	if (!mm) {
+		task_unlock(p);
 		return 0;
+	}
 
 	/*
 	 * The memory size of the process is the basis for the badness.
 	 */
-	points = p->mm->total_vm;
+	points = mm->total_vm;
+
+	/*
+	 * After this unlock we can no longer dereference local variable `mm'
+	 */
+	task_unlock(p);
 
 	/*
 	 * Processes which fork a lot of child processes are likely
@@ -64,11 +74,11 @@ unsigned long badness(struct task_struct *p, unsigned long uptime)
 	 * child is eating the vast majority of memory, adding only half
 	 * to the parents will make the child our kill candidate of choice.
 	 */
-	list_for_each(tsk, &p->children) {
-		struct task_struct *chld;
-		chld = list_entry(tsk, struct task_struct, sibling);
-		if (chld->mm != p->mm && chld->mm)
-			points += chld->mm->total_vm/2 + 1;
+	list_for_each_entry(child, &p->children, sibling) {
+		task_lock(child);
+		if (child->mm != mm && child->mm)
+			points += child->mm->total_vm/2 + 1;
+		task_unlock(child);
 	}
 
 	/*
@@ -244,17 +254,24 @@ static void __oom_kill_task(task_t *p, const char *message)
 	force_sig(SIGKILL, p);
 }
 
-static struct mm_struct *oom_kill_task(task_t *p, const char *message)
+static int oom_kill_task(task_t *p, const char *message)
 {
-	struct mm_struct *mm = get_task_mm(p);
+	struct mm_struct *mm;
 	task_t * g, * q;
 
-	if (!mm)
-		return NULL;
-	if (mm == &init_mm) {
-		mmput(mm);
-		return NULL;
-	}
+	mm = p->mm;
+
+	/* WARNING: mm may not be dereferenced since we did not obtain its
+	 * value from get_task_mm(p).  This is OK since all we need to do is
+	 * compare mm to q->mm below.
+	 *
+	 * Furthermore, even if mm contains a non-NULL value, p->mm may
+	 * change to NULL at any time since we do not hold task_lock(p).
+	 * However, this is of no concern to us.
+	 */
+
+	if (mm == NULL || mm == &init_mm)
+		return 1;
 
 	__oom_kill_task(p, message);
 	/*
@@ -266,13 +283,12 @@ static struct mm_struct *oom_kill_task(task_t *p, const char *message)
 			__oom_kill_task(q, message);
 	while_each_thread(g, q);
 
-	return mm;
+	return 0;
 }
 
-static struct mm_struct *oom_kill_process(struct task_struct *p,
-				unsigned long points, const char *message)
+static int oom_kill_process(struct task_struct *p, unsigned long points,
+		const char *message)
 {
- 	struct mm_struct *mm;
 	struct task_struct *c;
 	struct list_head *tsk;
 
@@ -283,9 +299,8 @@ static struct mm_struct *oom_kill_process(struct task_struct *p,
 		c = list_entry(tsk, struct task_struct, sibling);
 		if (c->mm == p->mm)
 			continue;
-		mm = oom_kill_task(c, message);
-		if (mm)
-			return mm;
+		if (!oom_kill_task(c, message))
+			return 0;
 	}
 	return oom_kill_task(p, message);
 }
@@ -300,7 +315,6 @@ static struct mm_struct *oom_kill_process(struct task_struct *p,
  */
 void out_of_memory(struct zonelist *zonelist, gfp_t gfp_mask, int order)
 {
-	struct mm_struct *mm = NULL;
 	task_t *p;
 	unsigned long points = 0;
 
@@ -320,12 +334,12 @@ void out_of_memory(struct zonelist *zonelist, gfp_t gfp_mask, int order)
 	 */
 	switch (constrained_alloc(zonelist, gfp_mask)) {
 	case CONSTRAINT_MEMORY_POLICY:
-		mm = oom_kill_process(current, points,
+		oom_kill_process(current, points,
 				"No available memory (MPOL_BIND)");
 		break;
 
 	case CONSTRAINT_CPUSET:
-		mm = oom_kill_process(current, points,
+		oom_kill_process(current, points,
 				"No available memory in cpuset");
 		break;
 
@@ -347,8 +361,7 @@ retry:
 			panic("Out of memory and no killable processes...\n");
 		}
 
-		mm = oom_kill_process(p, points, "Out of memory");
-		if (!mm)
+		if (oom_kill_process(p, points, "Out of memory"))
 			goto retry;
 
 		break;
@@ -357,8 +370,6 @@ retry:
 out:
 	read_unlock(&tasklist_lock);
 	cpuset_unlock();
-	if (mm)
-		mmput(mm);
 
 	/*
 	 * Give "p" a good chance of killing itself before we
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 97d6827c7d66..253a450c400d 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -39,6 +39,7 @@
 #include <linux/mempolicy.h>
 
 #include <asm/tlbflush.h>
+#include <asm/div64.h>
 #include "internal.h"
 
 /*
@@ -232,11 +233,13 @@ static inline void prep_zero_page(struct page *page, int order, gfp_t gfp_flags)
  * zone->lock is already acquired when we use these.
  * So, we don't need atomic page->flags operations here.
  */
-static inline unsigned long page_order(struct page *page) {
+static inline unsigned long page_order(struct page *page)
+{
 	return page_private(page);
 }
 
-static inline void set_page_order(struct page *page, int order) {
+static inline void set_page_order(struct page *page, int order)
+{
 	set_page_private(page, order);
 	__SetPageBuddy(page);
 }
@@ -299,9 +302,9 @@ static inline int page_is_buddy(struct page *page, int order)
 
 	if (PageBuddy(page) && page_order(page) == order) {
 		BUG_ON(page_count(page) != 0);
-               return 1;
+		return 1;
 	}
-       return 0;
+	return 0;
 }
 
 /*
@@ -948,7 +951,7 @@ restart:
 		goto got_pg;
 
 	do {
-		if (cpuset_zone_allowed(*z, gfp_mask))
+		if (cpuset_zone_allowed(*z, gfp_mask|__GFP_HARDWALL))
 			wakeup_kswapd(*z, order);
 	} while (*(++z));
 
@@ -967,7 +970,8 @@ restart:
 		alloc_flags |= ALLOC_HARDER;
 	if (gfp_mask & __GFP_HIGH)
 		alloc_flags |= ALLOC_HIGH;
-	alloc_flags |= ALLOC_CPUSET;
+	if (wait)
+		alloc_flags |= ALLOC_CPUSET;
 
 	/*
 	 * Go through the zonelist again. Let __GFP_HIGH and allocations
@@ -1960,7 +1964,7 @@ static inline void free_zone_pagesets(int cpu)
 	}
 }
 
-static int __cpuinit pageset_cpuup_callback(struct notifier_block *nfb,
+static int pageset_cpuup_callback(struct notifier_block *nfb,
 		unsigned long action,
 		void *hcpu)
 {
@@ -2121,14 +2125,22 @@ static void __init alloc_node_mem_map(struct pglist_data *pgdat)
 #ifdef CONFIG_FLAT_NODE_MEM_MAP
 	/* ia64 gets its own node_mem_map, before this, without bootmem */
 	if (!pgdat->node_mem_map) {
-		unsigned long size;
+		unsigned long size, start, end;
 		struct page *map;
 
-		size = (pgdat->node_spanned_pages + 1) * sizeof(struct page);
+		/*
+		 * The zone's endpoints aren't required to be MAX_ORDER
+		 * aligned but the node_mem_map endpoints must be in order
+		 * for the buddy allocator to function correctly.
+		 */
+		start = pgdat->node_start_pfn & ~(MAX_ORDER_NR_PAGES - 1);
+		end = pgdat->node_start_pfn + pgdat->node_spanned_pages;
+		end = ALIGN(end, MAX_ORDER_NR_PAGES);
+		size =  (end - start) * sizeof(struct page);
 		map = alloc_remap(pgdat->node_id, size);
 		if (!map)
 			map = alloc_bootmem_node(pgdat, size);
-		pgdat->node_mem_map = map;
+		pgdat->node_mem_map = map + (pgdat->node_start_pfn - start);
 	}
 #ifdef CONFIG_FLATMEM
 	/*
@@ -2564,9 +2576,11 @@ void setup_per_zone_pages_min(void)
 	}
 
 	for_each_zone(zone) {
-		unsigned long tmp;
+		u64 tmp;
+
 		spin_lock_irqsave(&zone->lru_lock, flags);
-		tmp = (pages_min * zone->present_pages) / lowmem_pages;
+		tmp = (u64)pages_min * zone->present_pages;
+		do_div(tmp, lowmem_pages);
 		if (is_highmem(zone)) {
 			/*
 			 * __GFP_HIGH and PF_MEMALLOC allocations usually don't
@@ -2593,8 +2607,8 @@ void setup_per_zone_pages_min(void)
 			zone->pages_min = tmp;
 		}
 
-		zone->pages_low   = zone->pages_min + tmp / 4;
-		zone->pages_high  = zone->pages_min + tmp / 2;
+		zone->pages_low   = zone->pages_min + (tmp >> 2);
+		zone->pages_high  = zone->pages_min + (tmp >> 1);
 		spin_unlock_irqrestore(&zone->lru_lock, flags);
 	}
 
diff --git a/mm/shmem.c b/mm/shmem.c
index 37eaf42ed2c6..4c5e68e4e9ae 100644
--- a/mm/shmem.c
+++ b/mm/shmem.c
@@ -46,6 +46,8 @@
 #include <linux/mempolicy.h>
 #include <linux/namei.h>
 #include <linux/ctype.h>
+#include <linux/migrate.h>
+
 #include <asm/uaccess.h>
 #include <asm/div64.h>
 #include <asm/pgtable.h>
@@ -2173,6 +2175,7 @@ static struct address_space_operations shmem_aops = {
 	.prepare_write	= shmem_prepare_write,
 	.commit_write	= simple_commit_write,
 #endif
+	.migratepage	= migrate_page,
 };
 
 static struct file_operations shmem_file_operations = {
diff --git a/mm/slab.c b/mm/slab.c
index e6ef9bd52335..f1b644eb39d8 100644
--- a/mm/slab.c
+++ b/mm/slab.c
@@ -207,11 +207,6 @@ typedef unsigned int kmem_bufctl_t;
 #define	BUFCTL_ACTIVE	(((kmem_bufctl_t)(~0U))-2)
 #define	SLAB_LIMIT	(((kmem_bufctl_t)(~0U))-3)
 
-/* Max number of objs-per-slab for caches which use off-slab slabs.
- * Needed to avoid a possible looping condition in cache_grow().
- */
-static unsigned long offslab_limit;
-
 /*
  * struct slab
  *
@@ -700,6 +695,14 @@ static enum {
 	FULL
 } g_cpucache_up;
 
+/*
+ * used by boot code to determine if it can use slab based allocator
+ */
+int slab_is_available(void)
+{
+	return g_cpucache_up == FULL;
+}
+
 static DEFINE_PER_CPU(struct work_struct, reap_work);
 
 static void free_block(struct kmem_cache *cachep, void **objpp, int len,
@@ -979,7 +982,8 @@ static void __drain_alien_cache(struct kmem_cache *cachep,
 		 * That way we could avoid the overhead of putting the objects
 		 * into the free lists and getting them back later.
 		 */
-		transfer_objects(rl3->shared, ac, ac->limit);
+		if (rl3->shared)
+			transfer_objects(rl3->shared, ac, ac->limit);
 
 		free_block(cachep, ac->entry, ac->avail, node);
 		ac->avail = 0;
@@ -1036,7 +1040,7 @@ static inline void free_alien_cache(struct array_cache **ac_ptr)
 
 #endif
 
-static int __devinit cpuup_callback(struct notifier_block *nfb,
+static int cpuup_callback(struct notifier_block *nfb,
 				    unsigned long action, void *hcpu)
 {
 	long cpu = (long)hcpu;
@@ -1347,12 +1351,6 @@ void __init kmem_cache_init(void)
 					NULL, NULL);
 		}
 
-		/* Inc off-slab bufctl limit until the ceiling is hit. */
-		if (!(OFF_SLAB(sizes->cs_cachep))) {
-			offslab_limit = sizes->cs_size - sizeof(struct slab);
-			offslab_limit /= sizeof(kmem_bufctl_t);
-		}
-
 		sizes->cs_dmacachep = kmem_cache_create(names->name_dma,
 					sizes->cs_size,
 					ARCH_KMALLOC_MINALIGN,
@@ -1771,6 +1769,7 @@ static void set_up_list3s(struct kmem_cache *cachep, int index)
 static size_t calculate_slab_order(struct kmem_cache *cachep,
 			size_t size, size_t align, unsigned long flags)
 {
+	unsigned long offslab_limit;
 	size_t left_over = 0;
 	int gfporder;
 
@@ -1782,9 +1781,18 @@ static size_t calculate_slab_order(struct kmem_cache *cachep,
 		if (!num)
 			continue;
 
-		/* More than offslab_limit objects will cause problems */
-		if ((flags & CFLGS_OFF_SLAB) && num > offslab_limit)
-			break;
+		if (flags & CFLGS_OFF_SLAB) {
+			/*
+			 * Max number of objs-per-slab for caches which
+			 * use off-slab slabs. Needed to avoid a possible
+			 * looping condition in cache_grow().
+			 */
+			offslab_limit = size - sizeof(struct slab);
+			offslab_limit /= sizeof(kmem_bufctl_t);
+
+ 			if (num > offslab_limit)
+				break;
+		}
 
 		/* Found something acceptable - save it away */
 		cachep->num = num;
@@ -2191,11 +2199,14 @@ static void drain_cpu_caches(struct kmem_cache *cachep)
 	check_irq_on();
 	for_each_online_node(node) {
 		l3 = cachep->nodelists[node];
-		if (l3) {
+		if (l3 && l3->alien)
+			drain_alien_cache(cachep, l3->alien);
+	}
+
+	for_each_online_node(node) {
+		l3 = cachep->nodelists[node];
+		if (l3)
 			drain_array(cachep, l3, l3->shared, 1, node);
-			if (l3->alien)
-				drain_alien_cache(cachep, l3->alien);
-		}
 	}
 }
 
diff --git a/mm/slob.c b/mm/slob.c
index 9bcc7e2cabfd..a68255ba4553 100644
--- a/mm/slob.c
+++ b/mm/slob.c
@@ -354,9 +354,7 @@ void *__alloc_percpu(size_t size)
 	if (!pdata)
 		return NULL;
 
-	for (i = 0; i < NR_CPUS; i++) {
-		if (!cpu_possible(i))
-			continue;
+	for_each_possible_cpu(i) {
 		pdata->ptrs[i] = kmalloc(size, GFP_KERNEL);
 		if (!pdata->ptrs[i])
 			goto unwind_oom;
@@ -383,11 +381,9 @@ free_percpu(const void *objp)
 	int i;
 	struct percpu_data *p = (struct percpu_data *) (~(unsigned long) objp);
 
-	for (i = 0; i < NR_CPUS; i++) {
-		if (!cpu_possible(i))
-			continue;
+	for_each_possible_cpu(i)
 		kfree(p->ptrs[i]);
-	}
+
 	kfree(p);
 }
 EXPORT_SYMBOL(free_percpu);
diff --git a/mm/sparse.c b/mm/sparse.c
index 0a51f36ba3a1..100040c0dfb6 100644
--- a/mm/sparse.c
+++ b/mm/sparse.c
@@ -32,7 +32,10 @@ static struct mem_section *sparse_index_alloc(int nid)
 	unsigned long array_size = SECTIONS_PER_ROOT *
 				   sizeof(struct mem_section);
 
-	section = alloc_bootmem_node(NODE_DATA(nid), array_size);
+	if (slab_is_available())
+		section = kmalloc_node(array_size, GFP_KERNEL, nid);
+	else
+		section = alloc_bootmem_node(NODE_DATA(nid), array_size);
 
 	if (section)
 		memset(section, 0, array_size);
@@ -84,11 +87,8 @@ int __section_nr(struct mem_section* ms)
 	unsigned long root_nr;
 	struct mem_section* root;
 
-	for (root_nr = 0;
-	     root_nr < NR_MEM_SECTIONS;
-	     root_nr += SECTIONS_PER_ROOT) {
-		root = __nr_to_section(root_nr);
-
+	for (root_nr = 0; root_nr < NR_SECTION_ROOTS; root_nr++) {
+		root = __nr_to_section(root_nr * SECTIONS_PER_ROOT);
 		if (!root)
 			continue;
 
@@ -281,9 +281,9 @@ int sparse_add_one_section(struct zone *zone, unsigned long start_pfn,
 
 	ret = sparse_init_one_section(ms, section_nr, memmap);
 
-	if (ret <= 0)
-		__kfree_section_memmap(memmap, nr_pages);
 out:
 	pgdat_resize_unlock(pgdat, &flags);
+	if (ret <= 0)
+		__kfree_section_memmap(memmap, nr_pages);
 	return ret;
 }
diff --git a/mm/vmscan.c b/mm/vmscan.c
index acdf001d6941..4649a63a8cb6 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -1328,7 +1328,7 @@ repeat:
    not required for correctness.  So if the last cpu in a node goes
    away, we get changed to run anywhere: as the first one comes back,
    restore their cpu bindings. */
-static int __devinit cpu_callback(struct notifier_block *nfb,
+static int cpu_callback(struct notifier_block *nfb,
 				  unsigned long action, void *hcpu)
 {
 	pg_data_t *pgdat;
diff --git a/net/802/tr.c b/net/802/tr.c
index afd8385c0c9c..e9dc803f2fe0 100644
--- a/net/802/tr.c
+++ b/net/802/tr.c
@@ -643,6 +643,5 @@ static int __init rif_init(void)
 
 module_init(rif_init);
 
-EXPORT_SYMBOL(tr_source_route);
 EXPORT_SYMBOL(tr_type_trans);
 EXPORT_SYMBOL(alloc_trdev);
diff --git a/net/atm/clip.c b/net/atm/clip.c
index 3ab4e7947bab..72d852982664 100644
--- a/net/atm/clip.c
+++ b/net/atm/clip.c
@@ -2,7 +2,6 @@
 
 /* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */
 
-
 #include <linux/config.h>
 #include <linux/string.h>
 #include <linux/errno.h>
@@ -54,24 +53,24 @@ static struct net_device *clip_devs;
 static struct atm_vcc *atmarpd;
 static struct neigh_table clip_tbl;
 static struct timer_list idle_timer;
-static int start_timer = 1;
-
 
-static int to_atmarpd(enum atmarp_ctrl_type type,int itf,unsigned long ip)
+static int to_atmarpd(enum atmarp_ctrl_type type, int itf, unsigned long ip)
 {
 	struct sock *sk;
 	struct atmarp_ctrl *ctrl;
 	struct sk_buff *skb;
 
-	DPRINTK("to_atmarpd(%d)\n",type);
-	if (!atmarpd) return -EUNATCH;
+	DPRINTK("to_atmarpd(%d)\n", type);
+	if (!atmarpd)
+		return -EUNATCH;
 	skb = alloc_skb(sizeof(struct atmarp_ctrl),GFP_ATOMIC);
-	if (!skb) return -ENOMEM;
+	if (!skb)
+		return -ENOMEM;
 	ctrl = (struct atmarp_ctrl *) skb_put(skb,sizeof(struct atmarp_ctrl));
 	ctrl->type = type;
 	ctrl->itf_num = itf;
 	ctrl->ip = ip;
-	atm_force_charge(atmarpd,skb->truesize);
+	atm_force_charge(atmarpd, skb->truesize);
 
 	sk = sk_atm(atmarpd);
 	skb_queue_tail(&sk->sk_receive_queue, skb);
@@ -79,26 +78,24 @@ static int to_atmarpd(enum atmarp_ctrl_type type,int itf,unsigned long ip)
 	return 0;
 }
 
-
-static void link_vcc(struct clip_vcc *clip_vcc,struct atmarp_entry *entry)
+static void link_vcc(struct clip_vcc *clip_vcc, struct atmarp_entry *entry)
 {
-	DPRINTK("link_vcc %p to entry %p (neigh %p)\n",clip_vcc,entry,
-	    entry->neigh);
+	DPRINTK("link_vcc %p to entry %p (neigh %p)\n", clip_vcc, entry,
+		entry->neigh);
 	clip_vcc->entry = entry;
-	clip_vcc->xoff = 0; /* @@@ may overrun buffer by one packet */
+	clip_vcc->xoff = 0;	/* @@@ may overrun buffer by one packet */
 	clip_vcc->next = entry->vccs;
 	entry->vccs = clip_vcc;
 	entry->neigh->used = jiffies;
 }
 
-
 static void unlink_clip_vcc(struct clip_vcc *clip_vcc)
 {
 	struct atmarp_entry *entry = clip_vcc->entry;
 	struct clip_vcc **walk;
 
 	if (!entry) {
-		printk(KERN_CRIT "!clip_vcc->entry (clip_vcc %p)\n",clip_vcc);
+		printk(KERN_CRIT "!clip_vcc->entry (clip_vcc %p)\n", clip_vcc);
 		return;
 	}
 	spin_lock_bh(&entry->neigh->dev->xmit_lock);	/* block clip_start_xmit() */
@@ -107,24 +104,24 @@ static void unlink_clip_vcc(struct clip_vcc *clip_vcc)
 		if (*walk == clip_vcc) {
 			int error;
 
-			*walk = clip_vcc->next; /* atomic */
+			*walk = clip_vcc->next;	/* atomic */
 			clip_vcc->entry = NULL;
 			if (clip_vcc->xoff)
 				netif_wake_queue(entry->neigh->dev);
 			if (entry->vccs)
 				goto out;
-			entry->expires = jiffies-1;
-				/* force resolution or expiration */
+			entry->expires = jiffies - 1;
+			/* force resolution or expiration */
 			error = neigh_update(entry->neigh, NULL, NUD_NONE,
 					     NEIGH_UPDATE_F_ADMIN);
 			if (error)
 				printk(KERN_CRIT "unlink_clip_vcc: "
-				    "neigh_update failed with %d\n",error);
+				       "neigh_update failed with %d\n", error);
 			goto out;
 		}
 	printk(KERN_CRIT "ATMARP: unlink_clip_vcc failed (entry %p, vcc "
-	  "0x%p)\n",entry,clip_vcc);
-out:
+	       "0x%p)\n", entry, clip_vcc);
+      out:
 	spin_unlock_bh(&entry->neigh->dev->xmit_lock);
 }
 
@@ -153,13 +150,13 @@ static int neigh_check_cb(struct neighbour *n)
 		DPRINTK("destruction postponed with ref %d\n",
 			atomic_read(&n->refcnt));
 
-		while ((skb = skb_dequeue(&n->arp_queue)) != NULL) 
+		while ((skb = skb_dequeue(&n->arp_queue)) != NULL)
 			dev_kfree_skb(skb);
 
 		return 0;
 	}
 
-	DPRINTK("expired neigh %p\n",n);
+	DPRINTK("expired neigh %p\n", n);
 	return 1;
 }
 
@@ -167,7 +164,7 @@ static void idle_timer_check(unsigned long dummy)
 {
 	write_lock(&clip_tbl.lock);
 	__neigh_for_each_release(&clip_tbl, neigh_check_cb);
-	mod_timer(&idle_timer, jiffies+CLIP_CHECK_INTERVAL*HZ);
+	mod_timer(&idle_timer, jiffies + CLIP_CHECK_INTERVAL * HZ);
 	write_unlock(&clip_tbl.lock);
 }
 
@@ -177,13 +174,13 @@ static int clip_arp_rcv(struct sk_buff *skb)
 
 	DPRINTK("clip_arp_rcv\n");
 	vcc = ATM_SKB(skb)->vcc;
-	if (!vcc || !atm_charge(vcc,skb->truesize)) {
+	if (!vcc || !atm_charge(vcc, skb->truesize)) {
 		dev_kfree_skb_any(skb);
 		return 0;
 	}
-	DPRINTK("pushing to %p\n",vcc);
-	DPRINTK("using %p\n",CLIP_VCC(vcc)->old_push);
-	CLIP_VCC(vcc)->old_push(vcc,skb);
+	DPRINTK("pushing to %p\n", vcc);
+	DPRINTK("using %p\n", CLIP_VCC(vcc)->old_push);
+	CLIP_VCC(vcc)->old_push(vcc, skb);
 	return 0;
 }
 
@@ -193,34 +190,38 @@ static const unsigned char llc_oui[] = {
 	0x03,	/* Ctrl: Unnumbered Information Command PDU */
 	0x00,	/* OUI: EtherType */
 	0x00,
-	0x00 };
+	0x00
+};
 
-static void clip_push(struct atm_vcc *vcc,struct sk_buff *skb)
+static void clip_push(struct atm_vcc *vcc, struct sk_buff *skb)
 {
 	struct clip_vcc *clip_vcc = CLIP_VCC(vcc);
 
 	DPRINTK("clip push\n");
 	if (!skb) {
-		DPRINTK("removing VCC %p\n",clip_vcc);
-		if (clip_vcc->entry) unlink_clip_vcc(clip_vcc);
-		clip_vcc->old_push(vcc,NULL); /* pass on the bad news */
+		DPRINTK("removing VCC %p\n", clip_vcc);
+		if (clip_vcc->entry)
+			unlink_clip_vcc(clip_vcc);
+		clip_vcc->old_push(vcc, NULL);	/* pass on the bad news */
 		kfree(clip_vcc);
 		return;
 	}
-	atm_return(vcc,skb->truesize);
+	atm_return(vcc, skb->truesize);
 	skb->dev = clip_vcc->entry ? clip_vcc->entry->neigh->dev : clip_devs;
-		/* clip_vcc->entry == NULL if we don't have an IP address yet */
+	/* clip_vcc->entry == NULL if we don't have an IP address yet */
 	if (!skb->dev) {
 		dev_kfree_skb_any(skb);
 		return;
 	}
 	ATM_SKB(skb)->vcc = vcc;
 	skb->mac.raw = skb->data;
-	if (!clip_vcc->encap || skb->len < RFC1483LLC_LEN || memcmp(skb->data,
-	    llc_oui,sizeof(llc_oui))) skb->protocol = htons(ETH_P_IP);
+	if (!clip_vcc->encap
+	    || skb->len < RFC1483LLC_LEN
+	    || memcmp(skb->data, llc_oui, sizeof (llc_oui)))
+		skb->protocol = htons(ETH_P_IP);
 	else {
 		skb->protocol = ((u16 *) skb->data)[3];
-		skb_pull(skb,RFC1483LLC_LEN);
+		skb_pull(skb, RFC1483LLC_LEN);
 		if (skb->protocol == htons(ETH_P_ARP)) {
 			PRIV(skb->dev)->stats.rx_packets++;
 			PRIV(skb->dev)->stats.rx_bytes += skb->len;
@@ -235,58 +236,54 @@ static void clip_push(struct atm_vcc *vcc,struct sk_buff *skb)
 	netif_rx(skb);
 }
 
-
 /*
  * Note: these spinlocks _must_not_ block on non-SMP. The only goal is that
  * clip_pop is atomic with respect to the critical section in clip_start_xmit.
  */
 
-
-static void clip_pop(struct atm_vcc *vcc,struct sk_buff *skb)
+static void clip_pop(struct atm_vcc *vcc, struct sk_buff *skb)
 {
 	struct clip_vcc *clip_vcc = CLIP_VCC(vcc);
 	struct net_device *dev = skb->dev;
 	int old;
 	unsigned long flags;
 
-	DPRINTK("clip_pop(vcc %p)\n",vcc);
-	clip_vcc->old_pop(vcc,skb);
+	DPRINTK("clip_pop(vcc %p)\n", vcc);
+	clip_vcc->old_pop(vcc, skb);
 	/* skb->dev == NULL in outbound ARP packets */
-	if (!dev) return;
-	spin_lock_irqsave(&PRIV(dev)->xoff_lock,flags);
-	if (atm_may_send(vcc,0)) {
-		old = xchg(&clip_vcc->xoff,0);
-		if (old) netif_wake_queue(dev);
+	if (!dev)
+		return;
+	spin_lock_irqsave(&PRIV(dev)->xoff_lock, flags);
+	if (atm_may_send(vcc, 0)) {
+		old = xchg(&clip_vcc->xoff, 0);
+		if (old)
+			netif_wake_queue(dev);
 	}
-	spin_unlock_irqrestore(&PRIV(dev)->xoff_lock,flags);
+	spin_unlock_irqrestore(&PRIV(dev)->xoff_lock, flags);
 }
 
-
 static void clip_neigh_destroy(struct neighbour *neigh)
 {
-	DPRINTK("clip_neigh_destroy (neigh %p)\n",neigh);
+	DPRINTK("clip_neigh_destroy (neigh %p)\n", neigh);
 	if (NEIGH2ENTRY(neigh)->vccs)
 		printk(KERN_CRIT "clip_neigh_destroy: vccs != NULL !!!\n");
 	NEIGH2ENTRY(neigh)->vccs = (void *) 0xdeadbeef;
 }
 
-
-static void clip_neigh_solicit(struct neighbour *neigh,struct sk_buff *skb)
+static void clip_neigh_solicit(struct neighbour *neigh, struct sk_buff *skb)
 {
-	DPRINTK("clip_neigh_solicit (neigh %p, skb %p)\n",neigh,skb);
-	to_atmarpd(act_need,PRIV(neigh->dev)->number,NEIGH2ENTRY(neigh)->ip);
+	DPRINTK("clip_neigh_solicit (neigh %p, skb %p)\n", neigh, skb);
+	to_atmarpd(act_need, PRIV(neigh->dev)->number, NEIGH2ENTRY(neigh)->ip);
 }
 
-
-static void clip_neigh_error(struct neighbour *neigh,struct sk_buff *skb)
+static void clip_neigh_error(struct neighbour *neigh, struct sk_buff *skb)
 {
 #ifndef CONFIG_ATM_CLIP_NO_ICMP
-	icmp_send(skb,ICMP_DEST_UNREACH,ICMP_HOST_UNREACH,0);
+	icmp_send(skb, ICMP_DEST_UNREACH, ICMP_HOST_UNREACH, 0);
 #endif
 	kfree_skb(skb);
 }
 
-
 static struct neigh_ops clip_neigh_ops = {
 	.family =		AF_INET,
 	.solicit =		clip_neigh_solicit,
@@ -297,7 +294,6 @@ static struct neigh_ops clip_neigh_ops = {
 	.queue_xmit =		dev_queue_xmit,
 };
 
-
 static int clip_constructor(struct neighbour *neigh)
 {
 	struct atmarp_entry *entry = NEIGH2ENTRY(neigh);
@@ -305,9 +301,10 @@ static int clip_constructor(struct neighbour *neigh)
 	struct in_device *in_dev;
 	struct neigh_parms *parms;
 
-	DPRINTK("clip_constructor (neigh %p, entry %p)\n",neigh,entry);
+	DPRINTK("clip_constructor (neigh %p, entry %p)\n", neigh, entry);
 	neigh->type = inet_addr_type(entry->ip);
-	if (neigh->type != RTN_UNICAST) return -EINVAL;
+	if (neigh->type != RTN_UNICAST)
+		return -EINVAL;
 
 	rcu_read_lock();
 	in_dev = __in_dev_get_rcu(dev);
@@ -326,13 +323,13 @@ static int clip_constructor(struct neighbour *neigh)
 	    neigh->ops->connected_output : neigh->ops->output;
 	entry->neigh = neigh;
 	entry->vccs = NULL;
-	entry->expires = jiffies-1;
+	entry->expires = jiffies - 1;
 	return 0;
 }
 
 static u32 clip_hash(const void *pkey, const struct net_device *dev)
 {
-	return jhash_2words(*(u32 *)pkey, dev->ifindex, clip_tbl.hash_rnd);
+	return jhash_2words(*(u32 *) pkey, dev->ifindex, clip_tbl.hash_rnd);
 }
 
 static struct neigh_table clip_tbl = {
@@ -366,7 +363,6 @@ static struct neigh_table clip_tbl = {
 	.gc_thresh3 	= 1024,
 };
 
-
 /* @@@ copy bh locking from arp.c -- need to bh-enable atm code before */
 
 /*
@@ -376,15 +372,13 @@ static struct neigh_table clip_tbl = {
  * clip_setentry.
  */
 
-
-static int clip_encap(struct atm_vcc *vcc,int mode)
+static int clip_encap(struct atm_vcc *vcc, int mode)
 {
 	CLIP_VCC(vcc)->encap = mode;
 	return 0;
 }
 
-
-static int clip_start_xmit(struct sk_buff *skb,struct net_device *dev)
+static int clip_start_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	struct clip_priv *clip_priv = PRIV(dev);
 	struct atmarp_entry *entry;
@@ -392,7 +386,7 @@ static int clip_start_xmit(struct sk_buff *skb,struct net_device *dev)
 	int old;
 	unsigned long flags;
 
-	DPRINTK("clip_start_xmit (skb %p)\n",skb);
+	DPRINTK("clip_start_xmit (skb %p)\n", skb);
 	if (!skb->dst) {
 		printk(KERN_ERR "clip_start_xmit: skb->dst == NULL\n");
 		dev_kfree_skb(skb);
@@ -401,9 +395,9 @@ static int clip_start_xmit(struct sk_buff *skb,struct net_device *dev)
 	}
 	if (!skb->dst->neighbour) {
 #if 0
-		skb->dst->neighbour = clip_find_neighbour(skb->dst,1);
+		skb->dst->neighbour = clip_find_neighbour(skb->dst, 1);
 		if (!skb->dst->neighbour) {
-			dev_kfree_skb(skb); /* lost that one */
+			dev_kfree_skb(skb);	/* lost that one */
 			clip_priv->stats.tx_dropped++;
 			return 0;
 		}
@@ -417,73 +411,73 @@ static int clip_start_xmit(struct sk_buff *skb,struct net_device *dev)
 	if (!entry->vccs) {
 		if (time_after(jiffies, entry->expires)) {
 			/* should be resolved */
-			entry->expires = jiffies+ATMARP_RETRY_DELAY*HZ;
-			to_atmarpd(act_need,PRIV(dev)->number,entry->ip);
+			entry->expires = jiffies + ATMARP_RETRY_DELAY * HZ;
+			to_atmarpd(act_need, PRIV(dev)->number, entry->ip);
 		}
 		if (entry->neigh->arp_queue.qlen < ATMARP_MAX_UNRES_PACKETS)
-			skb_queue_tail(&entry->neigh->arp_queue,skb);
+			skb_queue_tail(&entry->neigh->arp_queue, skb);
 		else {
 			dev_kfree_skb(skb);
 			clip_priv->stats.tx_dropped++;
 		}
 		return 0;
 	}
-	DPRINTK("neigh %p, vccs %p\n",entry,entry->vccs);
+	DPRINTK("neigh %p, vccs %p\n", entry, entry->vccs);
 	ATM_SKB(skb)->vcc = vcc = entry->vccs->vcc;
-	DPRINTK("using neighbour %p, vcc %p\n",skb->dst->neighbour,vcc);
+	DPRINTK("using neighbour %p, vcc %p\n", skb->dst->neighbour, vcc);
 	if (entry->vccs->encap) {
 		void *here;
 
-		here = skb_push(skb,RFC1483LLC_LEN);
-		memcpy(here,llc_oui,sizeof(llc_oui));
+		here = skb_push(skb, RFC1483LLC_LEN);
+		memcpy(here, llc_oui, sizeof(llc_oui));
 		((u16 *) here)[3] = skb->protocol;
 	}
 	atomic_add(skb->truesize, &sk_atm(vcc)->sk_wmem_alloc);
 	ATM_SKB(skb)->atm_options = vcc->atm_options;
 	entry->vccs->last_use = jiffies;
-	DPRINTK("atm_skb(%p)->vcc(%p)->dev(%p)\n",skb,vcc,vcc->dev);
-	old = xchg(&entry->vccs->xoff,1); /* assume XOFF ... */
+	DPRINTK("atm_skb(%p)->vcc(%p)->dev(%p)\n", skb, vcc, vcc->dev);
+	old = xchg(&entry->vccs->xoff, 1);	/* assume XOFF ... */
 	if (old) {
 		printk(KERN_WARNING "clip_start_xmit: XOFF->XOFF transition\n");
 		return 0;
 	}
 	clip_priv->stats.tx_packets++;
 	clip_priv->stats.tx_bytes += skb->len;
-	(void) vcc->send(vcc,skb);
-	if (atm_may_send(vcc,0)) {
+	vcc->send(vcc, skb);
+	if (atm_may_send(vcc, 0)) {
 		entry->vccs->xoff = 0;
 		return 0;
 	}
-	spin_lock_irqsave(&clip_priv->xoff_lock,flags);
-	netif_stop_queue(dev); /* XOFF -> throttle immediately */
+	spin_lock_irqsave(&clip_priv->xoff_lock, flags);
+	netif_stop_queue(dev);	/* XOFF -> throttle immediately */
 	barrier();
 	if (!entry->vccs->xoff)
 		netif_start_queue(dev);
-		/* Oh, we just raced with clip_pop. netif_start_queue should be
-		   good enough, because nothing should really be asleep because
-		   of the brief netif_stop_queue. If this isn't true or if it
-		   changes, use netif_wake_queue instead. */
-	spin_unlock_irqrestore(&clip_priv->xoff_lock,flags);
+	/* Oh, we just raced with clip_pop. netif_start_queue should be
+	   good enough, because nothing should really be asleep because
+	   of the brief netif_stop_queue. If this isn't true or if it
+	   changes, use netif_wake_queue instead. */
+	spin_unlock_irqrestore(&clip_priv->xoff_lock, flags);
 	return 0;
 }
 
-
 static struct net_device_stats *clip_get_stats(struct net_device *dev)
 {
 	return &PRIV(dev)->stats;
 }
 
-
-static int clip_mkip(struct atm_vcc *vcc,int timeout)
+static int clip_mkip(struct atm_vcc *vcc, int timeout)
 {
 	struct clip_vcc *clip_vcc;
 	struct sk_buff_head copy;
 	struct sk_buff *skb;
 
-	if (!vcc->push) return -EBADFD;
-	clip_vcc = kmalloc(sizeof(struct clip_vcc),GFP_KERNEL);
-	if (!clip_vcc) return -ENOMEM;
-	DPRINTK("mkip clip_vcc %p vcc %p\n",clip_vcc,vcc);
+	if (!vcc->push)
+		return -EBADFD;
+	clip_vcc = kmalloc(sizeof(struct clip_vcc), GFP_KERNEL);
+	if (!clip_vcc)
+		return -ENOMEM;
+	DPRINTK("mkip clip_vcc %p vcc %p\n", clip_vcc, vcc);
 	clip_vcc->vcc = vcc;
 	vcc->user_back = clip_vcc;
 	set_bit(ATM_VF_IS_CLIP, &vcc->flags);
@@ -491,7 +485,7 @@ static int clip_mkip(struct atm_vcc *vcc,int timeout)
 	clip_vcc->xoff = 0;
 	clip_vcc->encap = 1;
 	clip_vcc->last_use = jiffies;
-	clip_vcc->idle_timeout = timeout*HZ;
+	clip_vcc->idle_timeout = timeout * HZ;
 	clip_vcc->old_push = vcc->push;
 	clip_vcc->old_pop = vcc->pop;
 	vcc->push = clip_push;
@@ -501,27 +495,25 @@ static int clip_mkip(struct atm_vcc *vcc,int timeout)
 	/* re-process everything received between connection setup and MKIP */
 	while ((skb = skb_dequeue(&copy)) != NULL)
 		if (!clip_devs) {
-			atm_return(vcc,skb->truesize);
+			atm_return(vcc, skb->truesize);
 			kfree_skb(skb);
-		}
-		else {
+		} else {
 			unsigned int len = skb->len;
 
-			clip_push(vcc,skb);
+			clip_push(vcc, skb);
 			PRIV(skb->dev)->stats.rx_packets--;
 			PRIV(skb->dev)->stats.rx_bytes -= len;
 		}
 	return 0;
 }
 
-
-static int clip_setentry(struct atm_vcc *vcc,u32 ip)
+static int clip_setentry(struct atm_vcc *vcc, u32 ip)
 {
 	struct neighbour *neigh;
 	struct atmarp_entry *entry;
 	int error;
 	struct clip_vcc *clip_vcc;
-	struct flowi fl = { .nl_u = { .ip4_u = { .daddr = ip, .tos = 1 } } };
+	struct flowi fl = { .nl_u = { .ip4_u = { .daddr = ip, .tos = 1}} };
 	struct rtable *rt;
 
 	if (vcc->push != clip_push) {
@@ -538,28 +530,29 @@ static int clip_setentry(struct atm_vcc *vcc,u32 ip)
 		unlink_clip_vcc(clip_vcc);
 		return 0;
 	}
-	error = ip_route_output_key(&rt,&fl);
-	if (error) return error;
-	neigh = __neigh_lookup(&clip_tbl,&ip,rt->u.dst.dev,1);
+	error = ip_route_output_key(&rt, &fl);
+	if (error)
+		return error;
+	neigh = __neigh_lookup(&clip_tbl, &ip, rt->u.dst.dev, 1);
 	ip_rt_put(rt);
 	if (!neigh)
 		return -ENOMEM;
 	entry = NEIGH2ENTRY(neigh);
 	if (entry != clip_vcc->entry) {
-		if (!clip_vcc->entry) DPRINTK("setentry: add\n");
+		if (!clip_vcc->entry)
+			DPRINTK("setentry: add\n");
 		else {
 			DPRINTK("setentry: update\n");
 			unlink_clip_vcc(clip_vcc);
 		}
-		link_vcc(clip_vcc,entry);
+		link_vcc(clip_vcc, entry);
 	}
-	error = neigh_update(neigh, llc_oui, NUD_PERMANENT, 
-			     NEIGH_UPDATE_F_OVERRIDE|NEIGH_UPDATE_F_ADMIN);
+	error = neigh_update(neigh, llc_oui, NUD_PERMANENT,
+			     NEIGH_UPDATE_F_OVERRIDE | NEIGH_UPDATE_F_ADMIN);
 	neigh_release(neigh);
 	return error;
 }
 
-
 static void clip_setup(struct net_device *dev)
 {
 	dev->hard_start_xmit = clip_start_xmit;
@@ -568,15 +561,14 @@ static void clip_setup(struct net_device *dev)
 	dev->type = ARPHRD_ATM;
 	dev->hard_header_len = RFC1483LLC_LEN;
 	dev->mtu = RFC1626_MTU;
-	dev->tx_queue_len = 100; /* "normal" queue (packets) */
-	    /* When using a "real" qdisc, the qdisc determines the queue */
-	    /* length. tx_queue_len is only used for the default case, */
-	    /* without any more elaborate queuing. 100 is a reasonable */
-	    /* compromise between decent burst-tolerance and protection */
-	    /* against memory hogs. */
+	dev->tx_queue_len = 100;	/* "normal" queue (packets) */
+	/* When using a "real" qdisc, the qdisc determines the queue */
+	/* length. tx_queue_len is only used for the default case, */
+	/* without any more elaborate queuing. 100 is a reasonable */
+	/* compromise between decent burst-tolerance and protection */
+	/* against memory hogs. */
 }
 
-
 static int clip_create(int number)
 {
 	struct net_device *dev;
@@ -585,19 +577,19 @@ static int clip_create(int number)
 
 	if (number != -1) {
 		for (dev = clip_devs; dev; dev = PRIV(dev)->next)
-			if (PRIV(dev)->number == number) return -EEXIST;
-	}
-	else {
+			if (PRIV(dev)->number == number)
+				return -EEXIST;
+	} else {
 		number = 0;
 		for (dev = clip_devs; dev; dev = PRIV(dev)->next)
 			if (PRIV(dev)->number >= number)
-				number = PRIV(dev)->number+1;
+				number = PRIV(dev)->number + 1;
 	}
 	dev = alloc_netdev(sizeof(struct clip_priv), "", clip_setup);
 	if (!dev)
 		return -ENOMEM;
 	clip_priv = PRIV(dev);
-	sprintf(dev->name,"atm%d",number);
+	sprintf(dev->name, "atm%d", number);
 	spin_lock_init(&clip_priv->xoff_lock);
 	clip_priv->number = number;
 	error = register_netdev(dev);
@@ -607,53 +599,48 @@ static int clip_create(int number)
 	}
 	clip_priv->next = clip_devs;
 	clip_devs = dev;
-	DPRINTK("registered (net:%s)\n",dev->name);
+	DPRINTK("registered (net:%s)\n", dev->name);
 	return number;
 }
 
-
-static int clip_device_event(struct notifier_block *this,unsigned long event,
-    void *dev)
+static int clip_device_event(struct notifier_block *this, unsigned long event,
+			     void *arg)
 {
+	struct net_device *dev = arg;
+
+	if (event == NETDEV_UNREGISTER) {
+		neigh_ifdown(&clip_tbl, dev);
+		return NOTIFY_DONE;
+	}
+
 	/* ignore non-CLIP devices */
-	if (((struct net_device *) dev)->type != ARPHRD_ATM ||
-	    ((struct net_device *) dev)->hard_start_xmit != clip_start_xmit)
+	if (dev->type != ARPHRD_ATM || dev->hard_start_xmit != clip_start_xmit)
 		return NOTIFY_DONE;
+
 	switch (event) {
-		case NETDEV_UP:
-			DPRINTK("clip_device_event NETDEV_UP\n");
-			(void) to_atmarpd(act_up,PRIV(dev)->number,0);
-			break;
-		case NETDEV_GOING_DOWN:
-			DPRINTK("clip_device_event NETDEV_DOWN\n");
-			(void) to_atmarpd(act_down,PRIV(dev)->number,0);
-			break;
-		case NETDEV_CHANGE:
-		case NETDEV_CHANGEMTU:
-			DPRINTK("clip_device_event NETDEV_CHANGE*\n");
-			(void) to_atmarpd(act_change,PRIV(dev)->number,0);
-			break;
-		case NETDEV_REBOOT:
-		case NETDEV_REGISTER:
-		case NETDEV_DOWN:
-			DPRINTK("clip_device_event %ld\n",event);
-			/* ignore */
-			break;
-		default:
-			printk(KERN_WARNING "clip_device_event: unknown event "
-			    "%ld\n",event);
-			break;
+	case NETDEV_UP:
+		DPRINTK("clip_device_event NETDEV_UP\n");
+		to_atmarpd(act_up, PRIV(dev)->number, 0);
+		break;
+	case NETDEV_GOING_DOWN:
+		DPRINTK("clip_device_event NETDEV_DOWN\n");
+		to_atmarpd(act_down, PRIV(dev)->number, 0);
+		break;
+	case NETDEV_CHANGE:
+	case NETDEV_CHANGEMTU:
+		DPRINTK("clip_device_event NETDEV_CHANGE*\n");
+		to_atmarpd(act_change, PRIV(dev)->number, 0);
+		break;
 	}
 	return NOTIFY_DONE;
 }
 
-
-static int clip_inet_event(struct notifier_block *this,unsigned long event,
-    void *ifa)
+static int clip_inet_event(struct notifier_block *this, unsigned long event,
+			   void *ifa)
 {
 	struct in_device *in_dev;
 
-	in_dev = ((struct in_ifaddr *) ifa)->ifa_dev;
+	in_dev = ((struct in_ifaddr *)ifa)->ifa_dev;
 	if (!in_dev || !in_dev->dev) {
 		printk(KERN_WARNING "clip_inet_event: no device\n");
 		return NOTIFY_DONE;
@@ -662,23 +649,20 @@ static int clip_inet_event(struct notifier_block *this,unsigned long event,
 	 * Transitions are of the down-change-up type, so it's sufficient to
 	 * handle the change on up.
 	 */
-	if (event != NETDEV_UP) return NOTIFY_DONE;
-	return clip_device_event(this,NETDEV_CHANGE,in_dev->dev);
+	if (event != NETDEV_UP)
+		return NOTIFY_DONE;
+	return clip_device_event(this, NETDEV_CHANGE, in_dev->dev);
 }
 
 
 static struct notifier_block clip_dev_notifier = {
-	clip_device_event,
-	NULL,
-	0
+	.notifier_call = clip_device_event,
 };
 
 
 
 static struct notifier_block clip_inet_notifier = {
-	clip_inet_event,
-	NULL,
-	0
+	.notifier_call = clip_inet_event,
 };
 
 
@@ -686,14 +670,12 @@ static struct notifier_block clip_inet_notifier = {
 static void atmarpd_close(struct atm_vcc *vcc)
 {
 	DPRINTK("atmarpd_close\n");
-	atmarpd = NULL; /* assumed to be atomic */
-	barrier();
-	unregister_inetaddr_notifier(&clip_inet_notifier);
-	unregister_netdevice_notifier(&clip_dev_notifier);
-	if (skb_peek(&sk_atm(vcc)->sk_receive_queue))
-		printk(KERN_ERR "atmarpd_close: closing with requests "
-		    "pending\n");
+
+	rtnl_lock();
+	atmarpd = NULL;
 	skb_queue_purge(&sk_atm(vcc)->sk_receive_queue);
+	rtnl_unlock();
+
 	DPRINTK("(done)\n");
 	module_put(THIS_MODULE);
 }
@@ -714,14 +696,14 @@ static struct atm_dev atmarpd_dev = {
 
 static int atm_init_atmarp(struct atm_vcc *vcc)
 {
-	if (atmarpd) return -EADDRINUSE;
-	if (start_timer) {
-		start_timer = 0;
-		init_timer(&idle_timer);
-		idle_timer.expires = jiffies+CLIP_CHECK_INTERVAL*HZ;
-		idle_timer.function = idle_timer_check;
-		add_timer(&idle_timer);
+	rtnl_lock();
+	if (atmarpd) {
+		rtnl_unlock();
+		return -EADDRINUSE;
 	}
+
+	mod_timer(&idle_timer, jiffies+CLIP_CHECK_INTERVAL*HZ);
+
 	atmarpd = vcc;
 	set_bit(ATM_VF_META,&vcc->flags);
 	set_bit(ATM_VF_READY,&vcc->flags);
@@ -731,10 +713,7 @@ static int atm_init_atmarp(struct atm_vcc *vcc)
 	vcc->push = NULL;
 	vcc->pop = NULL; /* crash */
 	vcc->push_oam = NULL; /* crash */
-	if (register_netdevice_notifier(&clip_dev_notifier))
-		printk(KERN_ERR "register_netdevice_notifier failed\n");
-	if (register_inetaddr_notifier(&clip_inet_notifier))
-		printk(KERN_ERR "register_inetaddr_notifier failed\n");
+	rtnl_unlock();
 	return 0;
 }
 
@@ -744,53 +723,53 @@ static int clip_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg)
 	int err = 0;
 
 	switch (cmd) {
-		case SIOCMKCLIP:
-		case ATMARPD_CTRL:
-		case ATMARP_MKIP:
-		case ATMARP_SETENTRY:
-		case ATMARP_ENCAP:
-			if (!capable(CAP_NET_ADMIN))
-				return -EPERM;
-			break;
-		default:
-			return -ENOIOCTLCMD;
+	case SIOCMKCLIP:
+	case ATMARPD_CTRL:
+	case ATMARP_MKIP:
+	case ATMARP_SETENTRY:
+	case ATMARP_ENCAP:
+		if (!capable(CAP_NET_ADMIN))
+			return -EPERM;
+		break;
+	default:
+		return -ENOIOCTLCMD;
 	}
 
 	switch (cmd) {
-		case SIOCMKCLIP:
-			err = clip_create(arg);
-			break;
-		case ATMARPD_CTRL:
-			err = atm_init_atmarp(vcc);
-			if (!err) {
-				sock->state = SS_CONNECTED;
-				__module_get(THIS_MODULE);
-			}
-			break;
-		case ATMARP_MKIP:
-			err = clip_mkip(vcc ,arg);
-			break;
-		case ATMARP_SETENTRY:
-			err = clip_setentry(vcc, arg);
-			break;
-		case ATMARP_ENCAP:
-			err = clip_encap(vcc, arg);
-			break;
+	case SIOCMKCLIP:
+		err = clip_create(arg);
+		break;
+	case ATMARPD_CTRL:
+		err = atm_init_atmarp(vcc);
+		if (!err) {
+			sock->state = SS_CONNECTED;
+			__module_get(THIS_MODULE);
+		}
+		break;
+	case ATMARP_MKIP:
+		err = clip_mkip(vcc, arg);
+		break;
+	case ATMARP_SETENTRY:
+		err = clip_setentry(vcc, arg);
+		break;
+	case ATMARP_ENCAP:
+		err = clip_encap(vcc, arg);
+		break;
 	}
 	return err;
 }
 
 static struct atm_ioctl clip_ioctl_ops = {
-	.owner 	= THIS_MODULE,
-	.ioctl	= clip_ioctl,
+	.owner = THIS_MODULE,
+	.ioctl = clip_ioctl,
 };
 
 #ifdef CONFIG_PROC_FS
 
 static void svc_addr(struct seq_file *seq, struct sockaddr_atmsvc *addr)
 {
-	static int code[] = { 1,2,10,6,1,0 };
-	static int e164[] = { 1,8,4,6,1,0 };
+	static int code[] = { 1, 2, 10, 6, 1, 0 };
+	static int e164[] = { 1, 8, 4, 6, 1, 0 };
 
 	if (*addr->sas_addr.pub) {
 		seq_printf(seq, "%s", addr->sas_addr.pub);
@@ -809,7 +788,7 @@ static void svc_addr(struct seq_file *seq, struct sockaddr_atmsvc *addr)
 		for (i = 0; fields[i]; i++) {
 			for (j = fields[i]; j; j--)
 				seq_printf(seq, "%02X", *prv++);
-			if (fields[i+1])
+			if (fields[i + 1])
 				seq_putc(seq, '.');
 		}
 	}
@@ -828,8 +807,7 @@ static void atmarp_info(struct seq_file *seq, struct net_device *dev,
 	svc = ((clip_vcc == SEQ_NO_VCC_TOKEN) ||
 	       (sk_atm(clip_vcc->vcc)->sk_family == AF_ATMSVC));
 
-	llc = ((clip_vcc == SEQ_NO_VCC_TOKEN) ||
-	       clip_vcc->encap);
+	llc = ((clip_vcc == SEQ_NO_VCC_TOKEN) || clip_vcc->encap);
 
 	if (clip_vcc == SEQ_NO_VCC_TOKEN)
 		exp = entry->neigh->used;
@@ -839,10 +817,7 @@ static void atmarp_info(struct seq_file *seq, struct net_device *dev,
 	exp = (jiffies - exp) / HZ;
 
 	seq_printf(seq, "%-6s%-4s%-4s%5ld ",
-		   dev->name,
-		   svc ? "SVC" : "PVC",
-		   llc ? "LLC" : "NULL",
-		   exp);
+		   dev->name, svc ? "SVC" : "PVC", llc ? "LLC" : "NULL", exp);
 
 	off = scnprintf(buf, sizeof(buf) - 1, "%d.%d.%d.%d",
 			NIPQUAD(entry->ip));
@@ -860,8 +835,7 @@ static void atmarp_info(struct seq_file *seq, struct net_device *dev,
 	} else if (!svc) {
 		seq_printf(seq, "%d.%d.%d\n",
 			   clip_vcc->vcc->dev->number,
-			   clip_vcc->vcc->vpi,
-			   clip_vcc->vcc->vci);
+			   clip_vcc->vcc->vpi, clip_vcc->vcc->vci);
 	} else {
 		svc_addr(seq, &clip_vcc->vcc->remote);
 		seq_putc(seq, '\n');
@@ -894,7 +868,7 @@ static struct clip_vcc *clip_seq_next_vcc(struct atmarp_entry *e,
 }
 
 static void *clip_seq_vcc_walk(struct clip_seq_state *state,
-			       struct atmarp_entry *e, loff_t *pos)
+			       struct atmarp_entry *e, loff_t * pos)
 {
 	struct clip_vcc *vcc = state->vcc;
 
@@ -911,24 +885,24 @@ static void *clip_seq_vcc_walk(struct clip_seq_state *state,
 
 	return vcc;
 }
-  
+
 static void *clip_seq_sub_iter(struct neigh_seq_state *_state,
-			       struct neighbour *n, loff_t *pos)
+			       struct neighbour *n, loff_t * pos)
 {
-	struct clip_seq_state *state = (struct clip_seq_state *) _state;
+	struct clip_seq_state *state = (struct clip_seq_state *)_state;
 
 	return clip_seq_vcc_walk(state, NEIGH2ENTRY(n), pos);
 }
 
-static void *clip_seq_start(struct seq_file *seq, loff_t *pos)
+static void *clip_seq_start(struct seq_file *seq, loff_t * pos)
 {
 	return neigh_seq_start(seq, pos, &clip_tbl, NEIGH_SEQ_NEIGH_ONLY);
 }
 
 static int clip_seq_show(struct seq_file *seq, void *v)
 {
-	static char atm_arp_banner[] = 
-		"IPitf TypeEncp Idle IP address      ATM address\n";
+	static char atm_arp_banner[] =
+	    "IPitf TypeEncp Idle IP address      ATM address\n";
 
 	if (v == SEQ_START_TOKEN) {
 		seq_puts(seq, atm_arp_banner);
@@ -939,7 +913,7 @@ static int clip_seq_show(struct seq_file *seq, void *v)
 
 		atmarp_info(seq, n->dev, NEIGH2ENTRY(n), vcc);
 	}
-  	return 0;
+	return 0;
 }
 
 static struct seq_operations arp_seq_ops = {
@@ -988,20 +962,19 @@ static struct file_operations arp_seq_fops = {
 
 static int __init atm_clip_init(void)
 {
-	neigh_table_init(&clip_tbl);
+	struct proc_dir_entry *p;
+	neigh_table_init_no_netlink(&clip_tbl);
 
 	clip_tbl_hook = &clip_tbl;
 	register_atm_ioctl(&clip_ioctl_ops);
+	register_netdevice_notifier(&clip_dev_notifier);
+	register_inetaddr_notifier(&clip_inet_notifier);
 
-#ifdef CONFIG_PROC_FS
-{
-	struct proc_dir_entry *p;
+	setup_timer(&idle_timer, idle_timer_check, 0);
 
 	p = create_proc_entry("arp", S_IRUGO, atm_proc_root);
 	if (p)
 		p->proc_fops = &arp_seq_fops;
-}
-#endif
 
 	return 0;
 }
@@ -1012,13 +985,15 @@ static void __exit atm_clip_exit(void)
 
 	remove_proc_entry("arp", atm_proc_root);
 
+	unregister_inetaddr_notifier(&clip_inet_notifier);
+	unregister_netdevice_notifier(&clip_dev_notifier);
+
 	deregister_atm_ioctl(&clip_ioctl_ops);
 
 	/* First, stop the idle timer, so it stops banging
 	 * on the table.
 	 */
-	if (start_timer == 0)
-		del_timer(&idle_timer);
+	del_timer_sync(&idle_timer);
 
 	/* Next, purge the table, so that the device
 	 * unregister loop below does not hang due to
@@ -1042,5 +1017,6 @@ static void __exit atm_clip_exit(void)
 
 module_init(atm_clip_init);
 module_exit(atm_clip_exit);
-
+MODULE_AUTHOR("Werner Almesberger");
+MODULE_DESCRIPTION("Classical/IP over ATM interface");
 MODULE_LICENSE("GPL");
diff --git a/net/ax25/af_ax25.c b/net/ax25/af_ax25.c
index dbf9b47681f7..a2e0dd047e9f 100644
--- a/net/ax25/af_ax25.c
+++ b/net/ax25/af_ax25.c
@@ -228,6 +228,8 @@ ax25_cb *ax25_find_cb(ax25_address *src_addr, ax25_address *dest_addr,
 	return NULL;
 }
 
+EXPORT_SYMBOL(ax25_find_cb);
+
 void ax25_send_to_raw(ax25_address *addr, struct sk_buff *skb, int proto)
 {
 	ax25_cb *s;
@@ -424,6 +426,26 @@ static int ax25_ctl_ioctl(const unsigned int cmd, void __user *arg)
 	return 0;
 }
 
+static void ax25_fillin_cb_from_dev(ax25_cb *ax25, ax25_dev *ax25_dev)
+{
+	ax25->rtt     = msecs_to_jiffies(ax25_dev->values[AX25_VALUES_T1]) / 2;
+	ax25->t1      = msecs_to_jiffies(ax25_dev->values[AX25_VALUES_T1]);
+	ax25->t2      = msecs_to_jiffies(ax25_dev->values[AX25_VALUES_T2]);
+	ax25->t3      = msecs_to_jiffies(ax25_dev->values[AX25_VALUES_T3]);
+	ax25->n2      = ax25_dev->values[AX25_VALUES_N2];
+	ax25->paclen  = ax25_dev->values[AX25_VALUES_PACLEN];
+	ax25->idle    = msecs_to_jiffies(ax25_dev->values[AX25_VALUES_IDLE]);
+	ax25->backoff = ax25_dev->values[AX25_VALUES_BACKOFF];
+
+	if (ax25_dev->values[AX25_VALUES_AXDEFMODE]) {
+		ax25->modulus = AX25_EMODULUS;
+		ax25->window  = ax25_dev->values[AX25_VALUES_EWINDOW];
+	} else {
+		ax25->modulus = AX25_MODULUS;
+		ax25->window  = ax25_dev->values[AX25_VALUES_WINDOW];
+	}
+}
+
 /*
  *	Fill in a created AX.25 created control block with the default
  *	values for a particular device.
@@ -433,39 +455,28 @@ void ax25_fillin_cb(ax25_cb *ax25, ax25_dev *ax25_dev)
 	ax25->ax25_dev = ax25_dev;
 
 	if (ax25->ax25_dev != NULL) {
-		ax25->rtt     = ax25_dev->values[AX25_VALUES_T1] / 2;
-		ax25->t1      = ax25_dev->values[AX25_VALUES_T1];
-		ax25->t2      = ax25_dev->values[AX25_VALUES_T2];
-		ax25->t3      = ax25_dev->values[AX25_VALUES_T3];
-		ax25->n2      = ax25_dev->values[AX25_VALUES_N2];
-		ax25->paclen  = ax25_dev->values[AX25_VALUES_PACLEN];
-		ax25->idle    = ax25_dev->values[AX25_VALUES_IDLE];
-		ax25->backoff = ax25_dev->values[AX25_VALUES_BACKOFF];
-
-		if (ax25_dev->values[AX25_VALUES_AXDEFMODE]) {
-			ax25->modulus = AX25_EMODULUS;
-			ax25->window  = ax25_dev->values[AX25_VALUES_EWINDOW];
-		} else {
-			ax25->modulus = AX25_MODULUS;
-			ax25->window  = ax25_dev->values[AX25_VALUES_WINDOW];
-		}
+		ax25_fillin_cb_from_dev(ax25, ax25_dev);
+		return;
+	}
+
+	/*
+	 * No device, use kernel / AX.25 spec default values
+	 */
+	ax25->rtt     = msecs_to_jiffies(AX25_DEF_T1) / 2;
+	ax25->t1      = msecs_to_jiffies(AX25_DEF_T1);
+	ax25->t2      = msecs_to_jiffies(AX25_DEF_T2);
+	ax25->t3      = msecs_to_jiffies(AX25_DEF_T3);
+	ax25->n2      = AX25_DEF_N2;
+	ax25->paclen  = AX25_DEF_PACLEN;
+	ax25->idle    = msecs_to_jiffies(AX25_DEF_IDLE);
+	ax25->backoff = AX25_DEF_BACKOFF;
+
+	if (AX25_DEF_AXDEFMODE) {
+		ax25->modulus = AX25_EMODULUS;
+		ax25->window  = AX25_DEF_EWINDOW;
 	} else {
-		ax25->rtt     = AX25_DEF_T1 / 2;
-		ax25->t1      = AX25_DEF_T1;
-		ax25->t2      = AX25_DEF_T2;
-		ax25->t3      = AX25_DEF_T3;
-		ax25->n2      = AX25_DEF_N2;
-		ax25->paclen  = AX25_DEF_PACLEN;
-		ax25->idle    = AX25_DEF_IDLE;
-		ax25->backoff = AX25_DEF_BACKOFF;
-
-		if (AX25_DEF_AXDEFMODE) {
-			ax25->modulus = AX25_EMODULUS;
-			ax25->window  = AX25_DEF_EWINDOW;
-		} else {
-			ax25->modulus = AX25_MODULUS;
-			ax25->window  = AX25_DEF_WINDOW;
-		}
+		ax25->modulus = AX25_MODULUS;
+		ax25->window  = AX25_DEF_WINDOW;
 	}
 }
 
@@ -1979,24 +1990,6 @@ static struct notifier_block ax25_dev_notifier = {
 	.notifier_call =ax25_device_event,
 };
 
-EXPORT_SYMBOL(ax25_hard_header);
-EXPORT_SYMBOL(ax25_rebuild_header);
-EXPORT_SYMBOL(ax25_findbyuid);
-EXPORT_SYMBOL(ax25_find_cb);
-EXPORT_SYMBOL(ax25_linkfail_register);
-EXPORT_SYMBOL(ax25_linkfail_release);
-EXPORT_SYMBOL(ax25_listen_register);
-EXPORT_SYMBOL(ax25_listen_release);
-EXPORT_SYMBOL(ax25_protocol_register);
-EXPORT_SYMBOL(ax25_protocol_release);
-EXPORT_SYMBOL(ax25_send_frame);
-EXPORT_SYMBOL(ax25_uid_policy);
-EXPORT_SYMBOL(ax25cmp);
-EXPORT_SYMBOL(ax2asc);
-EXPORT_SYMBOL(asc2ax);
-EXPORT_SYMBOL(null_ax25_address);
-EXPORT_SYMBOL(ax25_display_timer);
-
 static int __init ax25_init(void)
 {
 	int rc = proto_register(&ax25_proto, 0);
diff --git a/net/ax25/ax25_addr.c b/net/ax25/ax25_addr.c
index 0164a155b8c4..5f0896ad0042 100644
--- a/net/ax25/ax25_addr.c
+++ b/net/ax25/ax25_addr.c
@@ -11,6 +11,7 @@
 #include <linux/socket.h>
 #include <linux/in.h>
 #include <linux/kernel.h>
+#include <linux/module.h>
 #include <linux/sched.h>
 #include <linux/timer.h>
 #include <linux/string.h>
@@ -33,6 +34,8 @@
  */
 ax25_address null_ax25_address = {{0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x00}};
 
+EXPORT_SYMBOL(null_ax25_address);
+
 /*
  *	ax25 -> ascii conversion
  */
@@ -64,6 +67,8 @@ char *ax2asc(char *buf, ax25_address *a)
 
 }
 
+EXPORT_SYMBOL(ax2asc);
+
 /*
  *	ascii -> ax25 conversion
  */
@@ -97,6 +102,8 @@ void asc2ax(ax25_address *addr, char *callsign)
 	addr->ax25_call[6] &= 0x1E;
 }
 
+EXPORT_SYMBOL(asc2ax);
+
 /*
  *	Compare two ax.25 addresses
  */
@@ -116,6 +123,8 @@ int ax25cmp(ax25_address *a, ax25_address *b)
  	return 2;			/* Partial match */
 }
 
+EXPORT_SYMBOL(ax25cmp);
+
 /*
  *	Compare two AX.25 digipeater paths.
  */
diff --git a/net/ax25/ax25_ds_timer.c b/net/ax25/ax25_ds_timer.c
index 061083efc1dc..5961459935eb 100644
--- a/net/ax25/ax25_ds_timer.c
+++ b/net/ax25/ax25_ds_timer.c
@@ -61,7 +61,8 @@ void ax25_ds_set_timer(ax25_dev *ax25_dev)
 		return;
 
 	del_timer(&ax25_dev->dama.slave_timer);
-	ax25_dev->dama.slave_timeout = ax25_dev->values[AX25_VALUES_DS_TIMEOUT] / 10;
+	ax25_dev->dama.slave_timeout =
+		msecs_to_jiffies(ax25_dev->values[AX25_VALUES_DS_TIMEOUT]) / 10;
 	ax25_ds_add_timer(ax25_dev);
 }
 
diff --git a/net/ax25/ax25_iface.c b/net/ax25/ax25_iface.c
index d68aff100729..3bb152710b77 100644
--- a/net/ax25/ax25_iface.c
+++ b/net/ax25/ax25_iface.c
@@ -12,6 +12,7 @@
 #include <linux/socket.h>
 #include <linux/in.h>
 #include <linux/kernel.h>
+#include <linux/module.h>
 #include <linux/sched.h>
 #include <linux/spinlock.h>
 #include <linux/timer.h>
@@ -74,6 +75,8 @@ int ax25_protocol_register(unsigned int pid,
 	return 1;
 }
 
+EXPORT_SYMBOL(ax25_protocol_register);
+
 void ax25_protocol_release(unsigned int pid)
 {
 	struct protocol_struct *s, *protocol;
@@ -106,6 +109,8 @@ void ax25_protocol_release(unsigned int pid)
 	write_unlock(&protocol_list_lock);
 }
 
+EXPORT_SYMBOL(ax25_protocol_release);
+
 int ax25_linkfail_register(void (*func)(ax25_cb *, int))
 {
 	struct linkfail_struct *linkfail;
@@ -123,6 +128,8 @@ int ax25_linkfail_register(void (*func)(ax25_cb *, int))
 	return 1;
 }
 
+EXPORT_SYMBOL(ax25_linkfail_register);
+
 void ax25_linkfail_release(void (*func)(ax25_cb *, int))
 {
 	struct linkfail_struct *s, *linkfail;
@@ -155,6 +162,8 @@ void ax25_linkfail_release(void (*func)(ax25_cb *, int))
 	spin_unlock_bh(&linkfail_lock);
 }
 
+EXPORT_SYMBOL(ax25_linkfail_release);
+
 int ax25_listen_register(ax25_address *callsign, struct net_device *dev)
 {
 	struct listen_struct *listen;
@@ -176,6 +185,8 @@ int ax25_listen_register(ax25_address *callsign, struct net_device *dev)
 	return 1;
 }
 
+EXPORT_SYMBOL(ax25_listen_register);
+
 void ax25_listen_release(ax25_address *callsign, struct net_device *dev)
 {
 	struct listen_struct *s, *listen;
@@ -208,6 +219,8 @@ void ax25_listen_release(ax25_address *callsign, struct net_device *dev)
 	spin_unlock_bh(&listen_lock);
 }
 
+EXPORT_SYMBOL(ax25_listen_release);
+
 int (*ax25_protocol_function(unsigned int pid))(struct sk_buff *, ax25_cb *)
 {
 	int (*res)(struct sk_buff *, ax25_cb *) = NULL;
diff --git a/net/ax25/ax25_ip.c b/net/ax25/ax25_ip.c
index d643dac3eccc..a0b534f80f17 100644
--- a/net/ax25/ax25_ip.c
+++ b/net/ax25/ax25_ip.c
@@ -12,6 +12,7 @@
 #include <linux/socket.h>
 #include <linux/in.h>
 #include <linux/kernel.h>
+#include <linux/module.h>
 #include <linux/sched.h>
 #include <linux/timer.h>
 #include <linux/string.h>
@@ -221,3 +222,5 @@ int ax25_rebuild_header(struct sk_buff *skb)
 
 #endif
 
+EXPORT_SYMBOL(ax25_hard_header);
+EXPORT_SYMBOL(ax25_rebuild_header);
diff --git a/net/ax25/ax25_out.c b/net/ax25/ax25_out.c
index 5fc048dcd39a..5d99852b239c 100644
--- a/net/ax25/ax25_out.c
+++ b/net/ax25/ax25_out.c
@@ -14,6 +14,7 @@
 #include <linux/socket.h>
 #include <linux/in.h>
 #include <linux/kernel.h>
+#include <linux/module.h>
 #include <linux/sched.h>
 #include <linux/timer.h>
 #include <linux/string.h>
@@ -104,6 +105,8 @@ ax25_cb *ax25_send_frame(struct sk_buff *skb, int paclen, ax25_address *src, ax2
 	return ax25;			/* We had to create it */
 }
 
+EXPORT_SYMBOL(ax25_send_frame);
+
 /*
  *	All outgoing AX.25 I frames pass via this routine. Therefore this is
  *	where the fragmentation of frames takes place. If fragment is set to
diff --git a/net/ax25/ax25_route.c b/net/ax25/ax25_route.c
index f04f8630fd28..5ac98250797b 100644
--- a/net/ax25/ax25_route.c
+++ b/net/ax25/ax25_route.c
@@ -360,7 +360,7 @@ struct file_operations ax25_route_fops = {
 /*
  *	Find AX.25 route
  *
- *	Only routes with a refernce rout of zero can be destroyed.
+ *	Only routes with a reference count of zero can be destroyed.
  */
 static ax25_route *ax25_get_route(ax25_address *addr, struct net_device *dev)
 {
diff --git a/net/ax25/ax25_timer.c b/net/ax25/ax25_timer.c
index 7a6b50a14554..ec254057f212 100644
--- a/net/ax25/ax25_timer.c
+++ b/net/ax25/ax25_timer.c
@@ -18,6 +18,7 @@
 #include <linux/socket.h>
 #include <linux/in.h>
 #include <linux/kernel.h>
+#include <linux/module.h>
 #include <linux/jiffies.h>
 #include <linux/timer.h>
 #include <linux/string.h>
@@ -137,6 +138,8 @@ unsigned long ax25_display_timer(struct timer_list *timer)
 	return timer->expires - jiffies;
 }
 
+EXPORT_SYMBOL(ax25_display_timer);
+
 static void ax25_heartbeat_expiry(unsigned long param)
 {
 	int proto = AX25_PROTO_STD_SIMPLEX;
diff --git a/net/ax25/ax25_uid.c b/net/ax25/ax25_uid.c
index b8b5854bce9a..5e9a81e8b214 100644
--- a/net/ax25/ax25_uid.c
+++ b/net/ax25/ax25_uid.c
@@ -49,6 +49,8 @@ static DEFINE_RWLOCK(ax25_uid_lock);
 
 int ax25_uid_policy = 0;
 
+EXPORT_SYMBOL(ax25_uid_policy);
+
 ax25_uid_assoc *ax25_findbyuid(uid_t uid)
 {
 	ax25_uid_assoc *ax25_uid, *res = NULL;
@@ -67,6 +69,8 @@ ax25_uid_assoc *ax25_findbyuid(uid_t uid)
 	return res;
 }
 
+EXPORT_SYMBOL(ax25_findbyuid);
+
 int ax25_uid_ioctl(int cmd, struct sockaddr_ax25 *sax)
 {
 	ax25_uid_assoc *ax25_uid;
diff --git a/net/ax25/sysctl_net_ax25.c b/net/ax25/sysctl_net_ax25.c
index 894a22558d9d..bdb64c36df12 100644
--- a/net/ax25/sysctl_net_ax25.c
+++ b/net/ax25/sysctl_net_ax25.c
@@ -18,14 +18,14 @@ static int min_backoff[1],		max_backoff[] = {2};
 static int min_conmode[1],		max_conmode[] = {2};
 static int min_window[] = {1},		max_window[] = {7};
 static int min_ewindow[] = {1},		max_ewindow[] = {63};
-static int min_t1[] = {1},		max_t1[] = {30 * HZ};
-static int min_t2[] = {1},		max_t2[] = {20 * HZ};
-static int min_t3[1],   		max_t3[] = {3600 * HZ};
-static int min_idle[1],  		max_idle[] = {65535 * HZ};
+static int min_t1[] = {1},		max_t1[] = {30000};
+static int min_t2[] = {1},		max_t2[] = {20000};
+static int min_t3[1],			max_t3[] = {3600000};
+static int min_idle[1],			max_idle[] = {65535000};
 static int min_n2[] = {1},		max_n2[] = {31};
 static int min_paclen[] = {1},		max_paclen[] = {512};
 static int min_proto[1],		max_proto[] = { AX25_PROTO_MAX };
-static int min_ds_timeout[1],   	max_ds_timeout[] = {65535 * HZ};
+static int min_ds_timeout[1],		max_ds_timeout[] = {65535000};
 
 static struct ctl_table_header *ax25_table_header;
 
diff --git a/net/bridge/br.c b/net/bridge/br.c
index 22d806cf40ca..12da21afb9ca 100644
--- a/net/bridge/br.c
+++ b/net/bridge/br.c
@@ -55,7 +55,7 @@ static int __init br_init(void)
 
 static void __exit br_deinit(void)
 {
-	llc_sap_close(br_stp_sap);
+	rcu_assign_pointer(br_stp_sap->rcv_func, NULL);
 
 #ifdef CONFIG_BRIDGE_NETFILTER
 	br_netfilter_fini();
@@ -67,6 +67,7 @@ static void __exit br_deinit(void)
 
 	synchronize_net();
 
+	llc_sap_put(br_stp_sap);
 	br_fdb_get_hook = NULL;
 	br_fdb_put_hook = NULL;
 
diff --git a/net/bridge/br_forward.c b/net/bridge/br_forward.c
index 2d24fb400e0c..56f3aa47e758 100644
--- a/net/bridge/br_forward.c
+++ b/net/bridge/br_forward.c
@@ -16,6 +16,7 @@
 #include <linux/kernel.h>
 #include <linux/netdevice.h>
 #include <linux/skbuff.h>
+#include <linux/if_vlan.h>
 #include <linux/netfilter_bridge.h>
 #include "br_private.h"
 
@@ -29,10 +30,15 @@ static inline int should_deliver(const struct net_bridge_port *p,
 	return 1;
 }
 
+static inline unsigned packet_length(const struct sk_buff *skb)
+{
+	return skb->len - (skb->protocol == htons(ETH_P_8021Q) ? VLAN_HLEN : 0);
+}
+
 int br_dev_queue_push_xmit(struct sk_buff *skb)
 {
 	/* drop mtu oversized packets except tso */
-	if (skb->len > skb->dev->mtu && !skb_shinfo(skb)->tso_size)
+	if (packet_length(skb) > skb->dev->mtu && !skb_shinfo(skb)->tso_size)
 		kfree_skb(skb);
 	else {
 #ifdef CONFIG_BRIDGE_NETFILTER
diff --git a/net/bridge/br_if.c b/net/bridge/br_if.c
index 59eef42d4a42..f5d47bf4f967 100644
--- a/net/bridge/br_if.c
+++ b/net/bridge/br_if.c
@@ -300,34 +300,22 @@ int br_add_bridge(const char *name)
 	rtnl_lock();
 	if (strchr(dev->name, '%')) {
 		ret = dev_alloc_name(dev, dev->name);
-		if (ret < 0)
-			goto err1;
+		if (ret < 0) {
+			free_netdev(dev);
+			goto out;
+		}
 	}
 
 	ret = register_netdevice(dev);
 	if (ret)
-		goto err2;
-
-	/* network device kobject is not setup until
-	 * after rtnl_unlock does it's hotplug magic.
-	 * so hold reference to avoid race.
-	 */
-	dev_hold(dev);
-	rtnl_unlock();
+		goto out;
 
 	ret = br_sysfs_addbr(dev);
-	dev_put(dev);
-
-	if (ret) 
-		unregister_netdev(dev);
+	if (ret)
+		unregister_netdevice(dev);
  out:
-	return ret;
-
- err2:
-	free_netdev(dev);
- err1:
 	rtnl_unlock();
-	goto out;
+	return ret;
 }
 
 int br_del_bridge(const char *name)
diff --git a/net/bridge/br_input.c b/net/bridge/br_input.c
index b0b7f55c1edd..bfa4d8c333f7 100644
--- a/net/bridge/br_input.c
+++ b/net/bridge/br_input.c
@@ -66,6 +66,7 @@ int br_handle_frame_finish(struct sk_buff *skb)
 	}
 
 	if (is_multicast_ether_addr(dest)) {
+		br->statistics.multicast++;
 		br_flood_forward(br, skb, !passedup);
 		if (!passedup)
 			br_pass_frame_up(br, skb);
diff --git a/net/bridge/netfilter/ebt_log.c b/net/bridge/netfilter/ebt_log.c
index d159c92cca84..466ed3440b74 100644
--- a/net/bridge/netfilter/ebt_log.c
+++ b/net/bridge/netfilter/ebt_log.c
@@ -168,7 +168,7 @@ static void ebt_log(const struct sk_buff *skb, unsigned int hooknr,
 
 	if (info->bitmask & EBT_LOG_NFLOG)
 		nf_log_packet(PF_BRIDGE, hooknr, skb, in, out, &li,
-		              info->prefix);
+		              "%s", info->prefix);
 	else
 		ebt_log_packet(PF_BRIDGE, hooknr, skb, in, out, &li,
 		               info->prefix);
diff --git a/net/bridge/netfilter/ebtables.c b/net/bridge/netfilter/ebtables.c
index 84b9af76f0a2..3a13ed643459 100644
--- a/net/bridge/netfilter/ebtables.c
+++ b/net/bridge/netfilter/ebtables.c
@@ -831,7 +831,7 @@ static int translate_table(struct ebt_replace *repl,
 			return -ENOMEM;
 		for_each_possible_cpu(i) {
 			newinfo->chainstack[i] =
-			   vmalloc(udc_cnt * sizeof(struct ebt_chainstack));
+			  vmalloc(udc_cnt * sizeof(*(newinfo->chainstack[0])));
 			if (!newinfo->chainstack[i]) {
 				while (i)
 					vfree(newinfo->chainstack[--i]);
@@ -841,8 +841,7 @@ static int translate_table(struct ebt_replace *repl,
 			}
 		}
 
-		cl_s = (struct ebt_cl_stack *)
-		   vmalloc(udc_cnt * sizeof(struct ebt_cl_stack));
+		cl_s = vmalloc(udc_cnt * sizeof(*cl_s));
 		if (!cl_s)
 			return -ENOMEM;
 		i = 0; /* the i'th udc */
@@ -944,8 +943,7 @@ static int do_replace(void __user *user, unsigned int len)
 
 	countersize = COUNTER_OFFSET(tmp.nentries) * 
 					(highest_possible_processor_id()+1);
-	newinfo = (struct ebt_table_info *)
-	   vmalloc(sizeof(struct ebt_table_info) + countersize);
+	newinfo = vmalloc(sizeof(*newinfo) + countersize);
 	if (!newinfo)
 		return -ENOMEM;
 
@@ -967,8 +965,7 @@ static int do_replace(void __user *user, unsigned int len)
 	/* the user wants counters back
 	   the check on the size is done later, when we have the lock */
 	if (tmp.num_counters) {
-		counterstmp = (struct ebt_counter *)
-		   vmalloc(tmp.num_counters * sizeof(struct ebt_counter));
+		counterstmp = vmalloc(tmp.num_counters * sizeof(*counterstmp));
 		if (!counterstmp) {
 			ret = -ENOMEM;
 			goto free_entries;
@@ -1148,8 +1145,7 @@ int ebt_register_table(struct ebt_table *table)
 
 	countersize = COUNTER_OFFSET(table->table->nentries) *
 					(highest_possible_processor_id()+1);
-	newinfo = (struct ebt_table_info *)
-	   vmalloc(sizeof(struct ebt_table_info) + countersize);
+	newinfo = vmalloc(sizeof(*newinfo) + countersize);
 	ret = -ENOMEM;
 	if (!newinfo)
 		return -ENOMEM;
@@ -1247,8 +1243,7 @@ static int update_counters(void __user *user, unsigned int len)
 	if (hlp.num_counters == 0)
 		return -EINVAL;
 
-	if ( !(tmp = (struct ebt_counter *)
-	   vmalloc(hlp.num_counters * sizeof(struct ebt_counter))) ){
+	if (!(tmp = vmalloc(hlp.num_counters * sizeof(*tmp)))) {
 		MEMPRINT("Update_counters && nomemory\n");
 		return -ENOMEM;
 	}
@@ -1377,8 +1372,7 @@ static int copy_everything_to_user(struct ebt_table *t, void __user *user,
 			BUGPRINT("Num_counters wrong\n");
 			return -EINVAL;
 		}
-		counterstmp = (struct ebt_counter *)
-		   vmalloc(nentries * sizeof(struct ebt_counter));
+		counterstmp = vmalloc(nentries * sizeof(*counterstmp));
 		if (!counterstmp) {
 			MEMPRINT("Couldn't copy counters, out of memory\n");
 			return -ENOMEM;
diff --git a/net/core/dev.c b/net/core/dev.c
index 83231a27ae02..4fba549caf29 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -127,7 +127,7 @@
  *             sure which should go first, but I bet it won't make much
  *             difference if we are running VLANs.  The good news is that
  *             this protocol won't be in the list unless compiled in, so
- *             the average user (w/out VLANs) will not be adversly affected.
+ *             the average user (w/out VLANs) will not be adversely affected.
  *             --BLG
  *
  *		0800	IP
@@ -149,7 +149,7 @@ static struct list_head ptype_base[16];	/* 16 way hashed list */
 static struct list_head ptype_all;		/* Taps */
 
 /*
- * The @dev_base list is protected by @dev_base_lock and the rtln
+ * The @dev_base list is protected by @dev_base_lock and the rtnl
  * semaphore.
  *
  * Pure readers hold dev_base_lock for reading.
@@ -193,7 +193,7 @@ static inline struct hlist_head *dev_index_hash(int ifindex)
  *	Our notifier list
  */
 
-static BLOCKING_NOTIFIER_HEAD(netdev_chain);
+static RAW_NOTIFIER_HEAD(netdev_chain);
 
 /*
  *	Device drivers call our routines to queue packets here. We empty the
@@ -641,10 +641,12 @@ int dev_valid_name(const char *name)
  *	@name: name format string
  *
  *	Passed a format string - eg "lt%d" it will try and find a suitable
- *	id. Not efficient for many devices, not called a lot. The caller
- *	must hold the dev_base or rtnl lock while allocating the name and
- *	adding the device in order to avoid duplicates. Returns the number
- *	of the unit assigned or a negative errno code.
+ *	id. It scans list of devices to build up a free map, then chooses
+ *	the first empty slot. The caller must hold the dev_base or rtnl lock
+ *	while allocating the name and adding the device in order to avoid
+ *	duplicates.
+ *	Limited to bits_per_byte * page size devices (ie 32K on most platforms).
+ *	Returns the number of the unit assigned or a negative errno code.
  */
 
 int dev_alloc_name(struct net_device *dev, const char *name)
@@ -736,7 +738,7 @@ int dev_change_name(struct net_device *dev, char *newname)
 	if (!err) {
 		hlist_del(&dev->name_hlist);
 		hlist_add_head(&dev->name_hlist, dev_name_hash(dev->name));
-		blocking_notifier_call_chain(&netdev_chain,
+		raw_notifier_call_chain(&netdev_chain,
 				NETDEV_CHANGENAME, dev);
 	}
 
@@ -744,14 +746,14 @@ int dev_change_name(struct net_device *dev, char *newname)
 }
 
 /**
- *	netdev_features_change - device changes fatures
+ *	netdev_features_change - device changes features
  *	@dev: device to cause notification
  *
  *	Called to indicate a device has changed features.
  */
 void netdev_features_change(struct net_device *dev)
 {
-	blocking_notifier_call_chain(&netdev_chain, NETDEV_FEAT_CHANGE, dev);
+	raw_notifier_call_chain(&netdev_chain, NETDEV_FEAT_CHANGE, dev);
 }
 EXPORT_SYMBOL(netdev_features_change);
 
@@ -766,7 +768,7 @@ EXPORT_SYMBOL(netdev_features_change);
 void netdev_state_change(struct net_device *dev)
 {
 	if (dev->flags & IFF_UP) {
-		blocking_notifier_call_chain(&netdev_chain,
+		raw_notifier_call_chain(&netdev_chain,
 				NETDEV_CHANGE, dev);
 		rtmsg_ifinfo(RTM_NEWLINK, dev, 0);
 	}
@@ -864,7 +866,7 @@ int dev_open(struct net_device *dev)
 		/*
 		 *	... and announce new interface.
 		 */
-		blocking_notifier_call_chain(&netdev_chain, NETDEV_UP, dev);
+		raw_notifier_call_chain(&netdev_chain, NETDEV_UP, dev);
 	}
 	return ret;
 }
@@ -887,7 +889,7 @@ int dev_close(struct net_device *dev)
 	 *	Tell people we are going down, so that they can
 	 *	prepare to death, when device is still operating.
 	 */
-	blocking_notifier_call_chain(&netdev_chain, NETDEV_GOING_DOWN, dev);
+	raw_notifier_call_chain(&netdev_chain, NETDEV_GOING_DOWN, dev);
 
 	dev_deactivate(dev);
 
@@ -924,7 +926,7 @@ int dev_close(struct net_device *dev)
 	/*
 	 * Tell people we are down
 	 */
-	blocking_notifier_call_chain(&netdev_chain, NETDEV_DOWN, dev);
+	raw_notifier_call_chain(&netdev_chain, NETDEV_DOWN, dev);
 
 	return 0;
 }
@@ -955,7 +957,7 @@ int register_netdevice_notifier(struct notifier_block *nb)
 	int err;
 
 	rtnl_lock();
-	err = blocking_notifier_chain_register(&netdev_chain, nb);
+	err = raw_notifier_chain_register(&netdev_chain, nb);
 	if (!err) {
 		for (dev = dev_base; dev; dev = dev->next) {
 			nb->notifier_call(nb, NETDEV_REGISTER, dev);
@@ -983,7 +985,7 @@ int unregister_netdevice_notifier(struct notifier_block *nb)
 	int err;
 
 	rtnl_lock();
-	err = blocking_notifier_chain_unregister(&netdev_chain, nb);
+	err = raw_notifier_chain_unregister(&netdev_chain, nb);
 	rtnl_unlock();
 	return err;
 }
@@ -994,12 +996,12 @@ int unregister_netdevice_notifier(struct notifier_block *nb)
  *      @v:   pointer passed unmodified to notifier function
  *
  *	Call all network notifier blocks.  Parameters and return value
- *	are as for blocking_notifier_call_chain().
+ *	are as for raw_notifier_call_chain().
  */
 
 int call_netdevice_notifiers(unsigned long val, void *v)
 {
-	return blocking_notifier_call_chain(&netdev_chain, val, v);
+	return raw_notifier_call_chain(&netdev_chain, val, v);
 }
 
 /* When > 0 there are consumers of rx skb time stamps */
@@ -2196,7 +2198,7 @@ int netdev_set_master(struct net_device *slave, struct net_device *master)
  *	@dev: device
  *	@inc: modifier
  *
- *	Add or remove promsicuity from a device. While the count in the device
+ *	Add or remove promiscuity from a device. While the count in the device
  *	remains above zero the interface remains promiscuous. Once it hits zero
  *	the device reverts back to normal filtering operation. A negative inc
  *	value is used to drop promiscuity on the device.
@@ -2308,7 +2310,7 @@ int dev_change_flags(struct net_device *dev, unsigned flags)
 	if (dev->flags & IFF_UP &&
 	    ((old_flags ^ dev->flags) &~ (IFF_UP | IFF_PROMISC | IFF_ALLMULTI |
 					  IFF_VOLATILE)))
-		blocking_notifier_call_chain(&netdev_chain,
+		raw_notifier_call_chain(&netdev_chain,
 				NETDEV_CHANGE, dev);
 
 	if ((flags ^ dev->gflags) & IFF_PROMISC) {
@@ -2353,7 +2355,7 @@ int dev_set_mtu(struct net_device *dev, int new_mtu)
 	else
 		dev->mtu = new_mtu;
 	if (!err && dev->flags & IFF_UP)
-		blocking_notifier_call_chain(&netdev_chain,
+		raw_notifier_call_chain(&netdev_chain,
 				NETDEV_CHANGEMTU, dev);
 	return err;
 }
@@ -2370,7 +2372,7 @@ int dev_set_mac_address(struct net_device *dev, struct sockaddr *sa)
 		return -ENODEV;
 	err = dev->set_mac_address(dev, sa);
 	if (!err)
-		blocking_notifier_call_chain(&netdev_chain,
+		raw_notifier_call_chain(&netdev_chain,
 				NETDEV_CHANGEADDR, dev);
 	return err;
 }
@@ -2427,7 +2429,7 @@ static int dev_ifsioc(struct ifreq *ifr, unsigned int cmd)
 				return -EINVAL;
 			memcpy(dev->broadcast, ifr->ifr_hwaddr.sa_data,
 			       min(sizeof ifr->ifr_hwaddr.sa_data, (size_t) dev->addr_len));
-			blocking_notifier_call_chain(&netdev_chain,
+			raw_notifier_call_chain(&netdev_chain,
 					    NETDEV_CHANGEADDR, dev);
 			return 0;
 
@@ -2698,7 +2700,8 @@ int dev_ioctl(unsigned int cmd, void __user *arg)
 				/* If command is `set a parameter', or
 				 * `get the encoding parameters', check if
 				 * the user has the right to do it */
-				if (IW_IS_SET(cmd) || cmd == SIOCGIWENCODE) {
+				if (IW_IS_SET(cmd) || cmd == SIOCGIWENCODE
+				    || cmd == SIOCGIWENCODEEXT) {
 					if (!capable(CAP_NET_ADMIN))
 						return -EPERM;
 				}
@@ -2776,6 +2779,8 @@ int register_netdevice(struct net_device *dev)
 	BUG_ON(dev_boot_phase);
 	ASSERT_RTNL();
 
+	might_sleep();
+
 	/* When net_device's are persistent, this will be fatal. */
 	BUG_ON(dev->reg_state != NETREG_UNINITIALIZED);
 
@@ -2862,6 +2867,11 @@ int register_netdevice(struct net_device *dev)
 	if (!dev->rebuild_header)
 		dev->rebuild_header = default_rebuild_header;
 
+	ret = netdev_register_sysfs(dev);
+	if (ret)
+		goto out_err;
+	dev->reg_state = NETREG_REGISTERED;
+
 	/*
 	 *	Default initial state at registry is that the
 	 *	device is present.
@@ -2877,14 +2887,11 @@ int register_netdevice(struct net_device *dev)
 	hlist_add_head(&dev->name_hlist, head);
 	hlist_add_head(&dev->index_hlist, dev_index_hash(dev->ifindex));
 	dev_hold(dev);
-	dev->reg_state = NETREG_REGISTERING;
 	write_unlock_bh(&dev_base_lock);
 
 	/* Notify protocols, that a new device appeared. */
-	blocking_notifier_call_chain(&netdev_chain, NETDEV_REGISTER, dev);
+	raw_notifier_call_chain(&netdev_chain, NETDEV_REGISTER, dev);
 
-	/* Finish registration after unlock */
-	net_set_todo(dev);
 	ret = 0;
 
 out:
@@ -2960,7 +2967,7 @@ static void netdev_wait_allrefs(struct net_device *dev)
 			rtnl_lock();
 
 			/* Rebroadcast unregister notification */
-			blocking_notifier_call_chain(&netdev_chain,
+			raw_notifier_call_chain(&netdev_chain,
 					    NETDEV_UNREGISTER, dev);
 
 			if (test_bit(__LINK_STATE_LINKWATCH_PENDING,
@@ -3007,7 +3014,7 @@ static void netdev_wait_allrefs(struct net_device *dev)
  *
  * We are invoked by rtnl_unlock() after it drops the semaphore.
  * This allows us to deal with problems:
- * 1) We can create/delete sysfs objects which invoke hotplug
+ * 1) We can delete sysfs objects which invoke hotplug
  *    without deadlocking with linkwatch via keventd.
  * 2) Since we run with the RTNL semaphore not held, we can sleep
  *    safely in order to wait for the netdev refcnt to drop to zero.
@@ -3016,8 +3023,6 @@ static DEFINE_MUTEX(net_todo_run_mutex);
 void netdev_run_todo(void)
 {
 	struct list_head list = LIST_HEAD_INIT(list);
-	int err;
-
 
 	/* Need to guard against multiple cpu's getting out of order. */
 	mutex_lock(&net_todo_run_mutex);
@@ -3040,40 +3045,29 @@ void netdev_run_todo(void)
 			= list_entry(list.next, struct net_device, todo_list);
 		list_del(&dev->todo_list);
 
-		switch(dev->reg_state) {
-		case NETREG_REGISTERING:
-			dev->reg_state = NETREG_REGISTERED;
-			err = netdev_register_sysfs(dev);
-			if (err)
-				printk(KERN_ERR "%s: failed sysfs registration (%d)\n",
-				       dev->name, err);
-			break;
-
-		case NETREG_UNREGISTERING:
-			netdev_unregister_sysfs(dev);
-			dev->reg_state = NETREG_UNREGISTERED;
-
-			netdev_wait_allrefs(dev);
+		if (unlikely(dev->reg_state != NETREG_UNREGISTERING)) {
+			printk(KERN_ERR "network todo '%s' but state %d\n",
+			       dev->name, dev->reg_state);
+			dump_stack();
+			continue;
+		}
 
-			/* paranoia */
-			BUG_ON(atomic_read(&dev->refcnt));
-			BUG_TRAP(!dev->ip_ptr);
-			BUG_TRAP(!dev->ip6_ptr);
-			BUG_TRAP(!dev->dn_ptr);
+		netdev_unregister_sysfs(dev);
+		dev->reg_state = NETREG_UNREGISTERED;
 
+		netdev_wait_allrefs(dev);
 
-			/* It must be the very last action, 
-			 * after this 'dev' may point to freed up memory.
-			 */
-			if (dev->destructor)
-				dev->destructor(dev);
-			break;
+		/* paranoia */
+		BUG_ON(atomic_read(&dev->refcnt));
+		BUG_TRAP(!dev->ip_ptr);
+		BUG_TRAP(!dev->ip6_ptr);
+		BUG_TRAP(!dev->dn_ptr);
 
-		default:
-			printk(KERN_ERR "network todo '%s' but state %d\n",
-			       dev->name, dev->reg_state);
-			break;
-		}
+		/* It must be the very last action,
+		 * after this 'dev' may point to freed up memory.
+		 */
+		if (dev->destructor)
+			dev->destructor(dev);
 	}
 
 out:
@@ -3130,7 +3124,7 @@ EXPORT_SYMBOL(alloc_netdev);
 void free_netdev(struct net_device *dev)
 {
 #ifdef CONFIG_SYSFS
-	/*  Compatiablity with error handling in drivers */
+	/*  Compatibility with error handling in drivers */
 	if (dev->reg_state == NETREG_UNINITIALIZED) {
 		kfree((char *)dev - dev->padded);
 		return;
@@ -3215,7 +3209,7 @@ int unregister_netdevice(struct net_device *dev)
 	/* Notify protocols, that we are about to destroy
 	   this device. They should clean all the things.
 	*/
-	blocking_notifier_call_chain(&netdev_chain, NETDEV_UNREGISTER, dev);
+	raw_notifier_call_chain(&netdev_chain, NETDEV_UNREGISTER, dev);
 	
 	/*
 	 *	Flush the multicast chain
diff --git a/net/core/filter.c b/net/core/filter.c
index 93fbd01d2259..5b4486a60cf6 100644
--- a/net/core/filter.c
+++ b/net/core/filter.c
@@ -34,6 +34,7 @@
 #include <linux/timer.h>
 #include <asm/system.h>
 #include <asm/uaccess.h>
+#include <asm/unaligned.h>
 #include <linux/filter.h>
 
 /* No hurry in this branch */
@@ -177,7 +178,7 @@ unsigned int sk_run_filter(struct sk_buff *skb, struct sock_filter *filter, int
 load_w:
 			ptr = load_pointer(skb, k, 4, &tmp);
 			if (ptr != NULL) {
-				A = ntohl(*(u32 *)ptr);
+				A = ntohl(get_unaligned((u32 *)ptr));
 				continue;
 			}
 			break;
@@ -186,7 +187,7 @@ load_w:
 load_h:
 			ptr = load_pointer(skb, k, 2, &tmp);
 			if (ptr != NULL) {
-				A = ntohs(*(u16 *)ptr);
+				A = ntohs(get_unaligned((u16 *)ptr));
 				continue;
 			}
 			break;
diff --git a/net/core/link_watch.c b/net/core/link_watch.c
index 341de44c7ed1..646937cc2d84 100644
--- a/net/core/link_watch.c
+++ b/net/core/link_watch.c
@@ -170,13 +170,13 @@ void linkwatch_fire_event(struct net_device *dev)
 		spin_unlock_irqrestore(&lweventlist_lock, flags);
 
 		if (!test_and_set_bit(LW_RUNNING, &linkwatch_flags)) {
-			unsigned long thisevent = jiffies;
+			unsigned long delay = linkwatch_nextevent - jiffies;
 
-			if (thisevent >= linkwatch_nextevent) {
+			/* If we wrap around we'll delay it by at most HZ. */
+			if (!delay || delay > HZ)
 				schedule_work(&linkwatch_work);
-			} else {
-				schedule_delayed_work(&linkwatch_work, linkwatch_nextevent - thisevent);
-			}
+			else
+				schedule_delayed_work(&linkwatch_work, delay);
 		}
 	}
 }
diff --git a/net/core/neighbour.c b/net/core/neighbour.c
index 4cf878efdb49..50a8c73caf97 100644
--- a/net/core/neighbour.c
+++ b/net/core/neighbour.c
@@ -1326,8 +1326,7 @@ void neigh_parms_destroy(struct neigh_parms *parms)
 	kfree(parms);
 }
 
-
-void neigh_table_init(struct neigh_table *tbl)
+void neigh_table_init_no_netlink(struct neigh_table *tbl)
 {
 	unsigned long now = jiffies;
 	unsigned long phsize;
@@ -1383,10 +1382,27 @@ void neigh_table_init(struct neigh_table *tbl)
 
 	tbl->last_flush = now;
 	tbl->last_rand	= now + tbl->parms.reachable_time * 20;
+}
+
+void neigh_table_init(struct neigh_table *tbl)
+{
+	struct neigh_table *tmp;
+
+	neigh_table_init_no_netlink(tbl);
 	write_lock(&neigh_tbl_lock);
+	for (tmp = neigh_tables; tmp; tmp = tmp->next) {
+		if (tmp->family == tbl->family)
+			break;
+	}
 	tbl->next	= neigh_tables;
 	neigh_tables	= tbl;
 	write_unlock(&neigh_tbl_lock);
+
+	if (unlikely(tmp)) {
+		printk(KERN_ERR "NEIGH: Registering multiple tables for "
+		       "family %d\n", tbl->family);
+		dump_stack();
+	}
 }
 
 int neigh_table_clear(struct neigh_table *tbl)
@@ -2657,6 +2673,7 @@ EXPORT_SYMBOL(neigh_rand_reach_time);
 EXPORT_SYMBOL(neigh_resolve_output);
 EXPORT_SYMBOL(neigh_table_clear);
 EXPORT_SYMBOL(neigh_table_init);
+EXPORT_SYMBOL(neigh_table_init_no_netlink);
 EXPORT_SYMBOL(neigh_update);
 EXPORT_SYMBOL(neigh_update_hhs);
 EXPORT_SYMBOL(pneigh_enqueue);
diff --git a/net/core/net-sysfs.c b/net/core/net-sysfs.c
index c12990c9c603..47a6fceb6771 100644
--- a/net/core/net-sysfs.c
+++ b/net/core/net-sysfs.c
@@ -29,7 +29,7 @@ static const char fmt_ulong[] = "%lu\n";
 
 static inline int dev_isalive(const struct net_device *dev) 
 {
-	return dev->reg_state == NETREG_REGISTERED;
+	return dev->reg_state <= NETREG_REGISTERED;
 }
 
 /* use same locking rules as GIF* ioctl's */
@@ -445,58 +445,33 @@ static struct class net_class = {
 
 void netdev_unregister_sysfs(struct net_device * net)
 {
-	struct class_device * class_dev = &(net->class_dev);
-
-	if (net->get_stats)
-		sysfs_remove_group(&class_dev->kobj, &netstat_group);
-
-#ifdef WIRELESS_EXT
-	if (net->get_wireless_stats || (net->wireless_handlers &&
-			net->wireless_handlers->get_wireless_stats))
-		sysfs_remove_group(&class_dev->kobj, &wireless_group);
-#endif
-	class_device_del(class_dev);
-
+	class_device_del(&(net->class_dev));
 }
 
 /* Create sysfs entries for network device. */
 int netdev_register_sysfs(struct net_device *net)
 {
 	struct class_device *class_dev = &(net->class_dev);
-	int ret;
+	struct attribute_group **groups = net->sysfs_groups;
 
+	class_device_initialize(class_dev);
 	class_dev->class = &net_class;
 	class_dev->class_data = net;
+	class_dev->groups = groups;
 
+	BUILD_BUG_ON(BUS_ID_SIZE < IFNAMSIZ);
 	strlcpy(class_dev->class_id, net->name, BUS_ID_SIZE);
-	if ((ret = class_device_register(class_dev)))
-		goto out;
 
-	if (net->get_stats &&
-	    (ret = sysfs_create_group(&class_dev->kobj, &netstat_group)))
-		goto out_unreg; 
+	if (net->get_stats)
+		*groups++ = &netstat_group;
 
 #ifdef WIRELESS_EXT
-	if (net->get_wireless_stats || (net->wireless_handlers &&
-			net->wireless_handlers->get_wireless_stats)) {
-		ret = sysfs_create_group(&class_dev->kobj, &wireless_group);
-		if (ret)
-			goto out_cleanup;
-	}
-	return 0;
-out_cleanup:
-	if (net->get_stats)
-		sysfs_remove_group(&class_dev->kobj, &netstat_group);
-#else
-	return 0;
+	if (net->get_wireless_stats
+	    || (net->wireless_handlers && net->wireless_handlers->get_wireless_stats))
+		*groups++ = &wireless_group;
 #endif
 
-out_unreg:
-	printk(KERN_WARNING "%s: sysfs attribute registration failed %d\n",
-	       net->name, ret);
-	class_device_unregister(class_dev);
-out:
-	return ret;
+	return class_device_add(class_dev);
 }
 
 int netdev_sysfs_init(void)
diff --git a/net/core/skbuff.c b/net/core/skbuff.c
index 09464fa8d72f..fb3770f9c094 100644
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -112,6 +112,14 @@ void skb_under_panic(struct sk_buff *skb, int sz, void *here)
 	BUG();
 }
 
+void skb_truesize_bug(struct sk_buff *skb)
+{
+	printk(KERN_ERR "SKB BUG: Invalid truesize (%u) "
+	       "len=%u, sizeof(sk_buff)=%Zd\n",
+	       skb->truesize, skb->len, sizeof(struct sk_buff));
+}
+EXPORT_SYMBOL(skb_truesize_bug);
+
 /* 	Allocate a new skbuff. We do this ourselves so we can fill in a few
  *	'private' fields and also do memory statistics to find all the
  *	[BEEP] leaks.
diff --git a/net/core/stream.c b/net/core/stream.c
index 35e25259fd95..e9489696f694 100644
--- a/net/core/stream.c
+++ b/net/core/stream.c
@@ -176,6 +176,7 @@ void sk_stream_rfree(struct sk_buff *skb)
 {
 	struct sock *sk = skb->sk;
 
+	skb_truesize_check(skb);
 	atomic_sub(skb->truesize, &sk->sk_rmem_alloc);
 	sk->sk_forward_alloc += skb->truesize;
 }
diff --git a/net/core/wireless.c b/net/core/wireless.c
index 81d6995fcfdb..d2bc72d318f7 100644
--- a/net/core/wireless.c
+++ b/net/core/wireless.c
@@ -1726,6 +1726,14 @@ int wireless_rtnetlink_get(struct net_device *	dev,
 	if(!IW_IS_GET(request->cmd))
 		return -EOPNOTSUPP;
 
+	/* If command is `get the encoding parameters', check if
+	 * the user has the right to do it */
+	if (request->cmd == SIOCGIWENCODE ||
+	    request->cmd == SIOCGIWENCODEEXT) {
+		if (!capable(CAP_NET_ADMIN))
+			return -EPERM;
+	}
+
 	/* Special cases */
 	if(request->cmd == SIOCGIWSTATS)
 		/* Get Wireless Stats */
diff --git a/net/dccp/proto.c b/net/dccp/proto.c
index 1ff7328b0e17..2e0ee8355c41 100644
--- a/net/dccp/proto.c
+++ b/net/dccp/proto.c
@@ -848,6 +848,7 @@ static int dccp_close_state(struct sock *sk)
 void dccp_close(struct sock *sk, long timeout)
 {
 	struct sk_buff *skb;
+	int state;
 
 	lock_sock(sk);
 
@@ -882,6 +883,11 @@ void dccp_close(struct sock *sk, long timeout)
 	sk_stream_wait_close(sk, timeout);
 
 adjudge_to_death:
+	state = sk->sk_state;
+	sock_hold(sk);
+	sock_orphan(sk);
+	atomic_inc(sk->sk_prot->orphan_count);
+
 	/*
 	 * It is the last release_sock in its life. It will remove backlog.
 	 */
@@ -894,8 +900,9 @@ adjudge_to_death:
 	bh_lock_sock(sk);
 	BUG_TRAP(!sock_owned_by_user(sk));
 
-	sock_hold(sk);
-	sock_orphan(sk);
+	/* Have we already been destroyed by a softirq or backlog? */
+	if (state != DCCP_CLOSED && sk->sk_state == DCCP_CLOSED)
+		goto out;
 
 	/*
 	 * The last release_sock may have processed the CLOSE or RESET
@@ -915,12 +922,12 @@ adjudge_to_death:
 #endif
 	}
 
-	atomic_inc(sk->sk_prot->orphan_count);
 	if (sk->sk_state == DCCP_CLOSED)
 		inet_csk_destroy_sock(sk);
 
 	/* Otherwise, socket is reprieved until protocol close. */
 
+out:
 	bh_unlock_sock(sk);
 	local_bh_enable();
 	sock_put(sk);
diff --git a/net/decnet/dn_neigh.c b/net/decnet/dn_neigh.c
index 7c8692c26bfe..66e230c3b328 100644
--- a/net/decnet/dn_neigh.c
+++ b/net/decnet/dn_neigh.c
@@ -493,7 +493,6 @@ struct elist_cb_state {
 static void neigh_elist_cb(struct neighbour *neigh, void *_info)
 {
 	struct elist_cb_state *s = _info;
-	struct dn_dev *dn_db;
 	struct dn_neigh *dn;
 
 	if (neigh->dev != s->dev)
@@ -503,10 +502,6 @@ static void neigh_elist_cb(struct neighbour *neigh, void *_info)
 	if (!(dn->flags & (DN_NDFLAG_R1|DN_NDFLAG_R2)))
 		return;
 
-	dn_db = (struct dn_dev *) s->dev->dn_ptr;
-	if (dn_db->parms.forwarding == 1 && (dn->flags & DN_NDFLAG_R2))
-		return;
-
 	if (s->t == s->n)
 		s->rs = dn_find_slot(s->ptr, s->n, dn->priority);
 	else
diff --git a/net/ethernet/Makefile b/net/ethernet/Makefile
index 69b74a9a0fc3..7cef1d8ace27 100644
--- a/net/ethernet/Makefile
+++ b/net/ethernet/Makefile
@@ -3,6 +3,5 @@
 #
 
 obj-y					+= eth.o
-obj-$(CONFIG_SYSCTL)			+= sysctl_net_ether.o
 obj-$(subst m,y,$(CONFIG_IPX))		+= pe2.o
 obj-$(subst m,y,$(CONFIG_ATALK))	+= pe2.o
diff --git a/net/ethernet/sysctl_net_ether.c b/net/ethernet/sysctl_net_ether.c
deleted file mode 100644
index 66b39fc342d2..000000000000
--- a/net/ethernet/sysctl_net_ether.c
+++ /dev/null
@@ -1,14 +0,0 @@
-/* -*- linux-c -*-
- * sysctl_net_ether.c: sysctl interface to net Ethernet subsystem.
- *
- * Begun April 1, 1996, Mike Shaver.
- * Added /proc/sys/net/ether directory entry (empty =) ). [MS]
- */
-
-#include <linux/mm.h>
-#include <linux/sysctl.h>
-#include <linux/if_ether.h>
-
-ctl_table ether_table[] = {
-	{0}
-};
diff --git a/net/ieee80211/softmac/Kconfig b/net/ieee80211/softmac/Kconfig
index 6cd9f3427be6..f2a27cc6ecb1 100644
--- a/net/ieee80211/softmac/Kconfig
+++ b/net/ieee80211/softmac/Kconfig
@@ -1,6 +1,7 @@
 config IEEE80211_SOFTMAC
 	tristate "Software MAC add-on to the IEEE 802.11 networking stack"
 	depends on IEEE80211 && EXPERIMENTAL
+	select WIRELESS_EXT
 	---help---
 	This option enables the hardware independent software MAC addon
 	for the IEEE 802.11 networking stack.
diff --git a/net/ieee80211/softmac/ieee80211softmac_assoc.c b/net/ieee80211/softmac/ieee80211softmac_assoc.c
index be61de78dfa4..57ea9f6f465c 100644
--- a/net/ieee80211/softmac/ieee80211softmac_assoc.c
+++ b/net/ieee80211/softmac/ieee80211softmac_assoc.c
@@ -51,11 +51,12 @@ ieee80211softmac_assoc(struct ieee80211softmac_device *mac, struct ieee80211soft
 	spin_lock_irqsave(&mac->lock, flags);
 	mac->associnfo.associating = 1;
 	mac->associated = 0; /* just to make sure */
-	spin_unlock_irqrestore(&mac->lock, flags);
 
 	/* Set a timer for timeout */
 	/* FIXME: make timeout configurable */
-	schedule_delayed_work(&mac->associnfo.timeout, 5 * HZ);
+	if (likely(mac->running))
+		schedule_delayed_work(&mac->associnfo.timeout, 5 * HZ);
+	spin_unlock_irqrestore(&mac->lock, flags);
 }
 
 void
@@ -101,6 +102,7 @@ ieee80211softmac_disassoc(struct ieee80211softmac_device *mac, u16 reason)
 	/* Do NOT clear bssvalid as that will break ieee80211softmac_assoc_work! */
 	mac->associated = 0;
 	mac->associnfo.associating = 0;
+	ieee80211softmac_call_events_locked(mac, IEEE80211SOFTMAC_EVENT_DISASSOCIATED, NULL);
 	spin_unlock_irqrestore(&mac->lock, flags);
 }
 
@@ -143,6 +145,12 @@ network_matches_request(struct ieee80211softmac_device *mac, struct ieee80211_ne
 	if (!we_support_all_basic_rates(mac, net->rates_ex, net->rates_ex_len))
 		return 0;
 
+	/* assume that users know what they're doing ...
+	 * (note we don't let them select a net we're incompatible with) */
+	if (mac->associnfo.bssfixed) {
+		return !memcmp(mac->associnfo.bssid, net->bssid, ETH_ALEN);
+	}
+
 	/* if 'ANY' network requested, take any that doesn't have privacy enabled */
 	if (mac->associnfo.req_essid.len == 0 
 	    && !(net->capability & WLAN_CAPABILITY_PRIVACY))
@@ -175,7 +183,7 @@ ieee80211softmac_assoc_work(void *d)
 		ieee80211softmac_disassoc(mac, WLAN_REASON_DISASSOC_STA_HAS_LEFT);
 
 	/* try to find the requested network in our list, if we found one already */
-	if (mac->associnfo.bssvalid)
+	if (mac->associnfo.bssvalid || mac->associnfo.bssfixed)
 		found = ieee80211softmac_get_network_by_bssid(mac, mac->associnfo.bssid);	
 	
 	/* Search the ieee80211 networks for this network if we didn't find it by bssid,
@@ -240,19 +248,25 @@ ieee80211softmac_assoc_work(void *d)
 			if (ieee80211softmac_start_scan(mac))
 				dprintk(KERN_INFO PFX "Associate: failed to initiate scan. Is device up?\n");
 			return;
-		}
-		else {
+		} else {
 			spin_lock_irqsave(&mac->lock, flags);
 			mac->associnfo.associating = 0;
 			mac->associated = 0;
 			spin_unlock_irqrestore(&mac->lock, flags);
 
 			dprintk(KERN_INFO PFX "Unable to find matching network after scan!\n");
+			/* reset the retry counter for the next user request since we
+			 * break out and don't reschedule ourselves after this point. */
+			mac->associnfo.scan_retry = IEEE80211SOFTMAC_ASSOC_SCAN_RETRY_LIMIT;
 			ieee80211softmac_call_events(mac, IEEE80211SOFTMAC_EVENT_ASSOCIATE_NET_NOT_FOUND, NULL);
 			return;
 		}
 	}
-	
+
+	/* reset the retry counter for the next user request since we
+	 * now found a net and will try to associate to it, but not
+	 * schedule this function again. */
+	mac->associnfo.scan_retry = IEEE80211SOFTMAC_ASSOC_SCAN_RETRY_LIMIT;
 	mac->associnfo.bssvalid = 1;
 	memcpy(mac->associnfo.bssid, found->bssid, ETH_ALEN);
 	/* copy the ESSID for displaying it */
@@ -306,6 +320,9 @@ ieee80211softmac_handle_assoc_response(struct net_device * dev,
 	u16 status = le16_to_cpup(&resp->status);
 	struct ieee80211softmac_network *network = NULL;
 	unsigned long flags;
+
+	if (unlikely(!mac->running))
+		return -ENODEV;
 	
 	spin_lock_irqsave(&mac->lock, flags);
 
@@ -364,15 +381,22 @@ ieee80211softmac_handle_disassoc(struct net_device * dev,
 {
 	struct ieee80211softmac_device *mac = ieee80211_priv(dev);
 	unsigned long flags;
+
+	if (unlikely(!mac->running))
+		return -ENODEV;
+
 	if (memcmp(disassoc->header.addr2, mac->associnfo.bssid, ETH_ALEN))
 		return 0;
+
 	if (memcmp(disassoc->header.addr1, mac->dev->dev_addr, ETH_ALEN))
 		return 0;
+
 	dprintk(KERN_INFO PFX "got disassoc frame\n");
 	netif_carrier_off(dev);
 	spin_lock_irqsave(&mac->lock, flags);
 	mac->associnfo.bssvalid = 0;
 	mac->associated = 0;
+	ieee80211softmac_call_events_locked(mac, IEEE80211SOFTMAC_EVENT_DISASSOCIATED, NULL);
 	schedule_work(&mac->associnfo.work);
 	spin_unlock_irqrestore(&mac->lock, flags);
 	
@@ -386,11 +410,15 @@ ieee80211softmac_handle_reassoc_req(struct net_device * dev,
 	struct ieee80211softmac_device *mac = ieee80211_priv(dev);
 	struct ieee80211softmac_network *network;
 
+	if (unlikely(!mac->running))
+		return -ENODEV;
+
 	network = ieee80211softmac_get_network_by_bssid(mac, resp->header.addr3);
 	if (!network) {
 		dprintkl(KERN_INFO PFX "reassoc request from unknown network\n");
 		return 0;
 	}
-	ieee80211softmac_assoc(mac, network);
+	schedule_work(&mac->associnfo.work);
+
 	return 0;
 }
diff --git a/net/ieee80211/softmac/ieee80211softmac_auth.c b/net/ieee80211/softmac/ieee80211softmac_auth.c
index 9a0eac6c61eb..06e332624665 100644
--- a/net/ieee80211/softmac/ieee80211softmac_auth.c
+++ b/net/ieee80211/softmac/ieee80211softmac_auth.c
@@ -86,6 +86,11 @@ ieee80211softmac_auth_queue(void *data)
 		
 		/* Lock and set flags */
 		spin_lock_irqsave(&mac->lock, flags);
+		if (unlikely(!mac->running)) {
+			/* Prevent reschedule on workqueue flush */
+			spin_unlock_irqrestore(&mac->lock, flags);
+			return;
+		}
 		net->authenticated = 0;
 		net->authenticating = 1;
 		/* add a timeout call so we eventually give up waiting for an auth reply */
@@ -124,6 +129,9 @@ ieee80211softmac_auth_resp(struct net_device *dev, struct ieee80211_auth *auth)
 	unsigned long flags;
 	u8 * data;
 	
+	if (unlikely(!mac->running))
+		return -ENODEV;
+
 	/* Find correct auth queue item */
 	spin_lock_irqsave(&mac->lock, flags);
 	list_for_each(list_ptr, &mac->auth_queue) {
@@ -298,8 +306,6 @@ ieee80211softmac_deauth_from_net(struct ieee80211softmac_device *mac,
 	
 	/* can't transmit data right now... */
 	netif_carrier_off(mac->dev);
-	/* let's try to re-associate */
-	schedule_work(&mac->associnfo.work);
 	spin_unlock_irqrestore(&mac->lock, flags);
 }
 
@@ -338,6 +344,9 @@ ieee80211softmac_deauth_resp(struct net_device *dev, struct ieee80211_deauth *de
 	struct ieee80211softmac_network *net = NULL;
 	struct ieee80211softmac_device *mac = ieee80211_priv(dev);
 	
+	if (unlikely(!mac->running))
+		return -ENODEV;
+
 	if (!deauth) {
 		dprintk("deauth without deauth packet. eek!\n");
 		return 0;
@@ -360,5 +369,8 @@ ieee80211softmac_deauth_resp(struct net_device *dev, struct ieee80211_deauth *de
 	}
 
 	ieee80211softmac_deauth_from_net(mac, net);
+
+	/* let's try to re-associate */
+	schedule_work(&mac->associnfo.work);
 	return 0;
 }
diff --git a/net/ieee80211/softmac/ieee80211softmac_event.c b/net/ieee80211/softmac/ieee80211softmac_event.c
index 0a52bbda1e4c..8cc8f3f0f8e7 100644
--- a/net/ieee80211/softmac/ieee80211softmac_event.c
+++ b/net/ieee80211/softmac/ieee80211softmac_event.c
@@ -67,6 +67,7 @@ static char *event_descriptions[IEEE80211SOFTMAC_EVENT_LAST+1] = {
 	"authenticating failed",
 	"authenticating timed out",
 	"associating failed because no suitable network was found",
+	"disassociated",
 };
 
 
@@ -128,13 +129,42 @@ void
 ieee80211softmac_call_events_locked(struct ieee80211softmac_device *mac, int event, void *event_ctx)
 {
 	struct ieee80211softmac_event *eventptr, *tmp;
-	union iwreq_data wrqu;
-	char *msg;
+	struct ieee80211softmac_network *network;
 	
 	if (event >= 0) {
-		msg = event_descriptions[event];
-		wrqu.data.length = strlen(msg);
-		wireless_send_event(mac->dev, IWEVCUSTOM, &wrqu, msg);
+		union iwreq_data wrqu;
+		int we_event;
+		char *msg = NULL;
+
+		switch(event) {
+		case IEEE80211SOFTMAC_EVENT_ASSOCIATED:
+			network = (struct ieee80211softmac_network *)event_ctx;
+			wrqu.data.length = 0;
+			wrqu.data.flags = 0;
+			memcpy(wrqu.ap_addr.sa_data, &network->bssid[0], ETH_ALEN);
+			wrqu.ap_addr.sa_family = ARPHRD_ETHER;
+			we_event = SIOCGIWAP;
+			break;
+		case IEEE80211SOFTMAC_EVENT_DISASSOCIATED:
+			wrqu.data.length = 0;
+			wrqu.data.flags = 0;
+			memset(&wrqu, '\0', sizeof (union iwreq_data));
+			wrqu.ap_addr.sa_family = ARPHRD_ETHER;
+			we_event = SIOCGIWAP;
+			break;
+		case IEEE80211SOFTMAC_EVENT_SCAN_FINISHED:
+			wrqu.data.length = 0;
+			wrqu.data.flags = 0;
+			memset(&wrqu, '\0', sizeof (union iwreq_data));
+			we_event = SIOCGIWSCAN;
+			break;
+		default:
+			msg = event_descriptions[event];
+			wrqu.data.length = strlen(msg);
+			we_event = IWEVCUSTOM;
+			break;
+		}
+		wireless_send_event(mac->dev, we_event, &wrqu, msg);
 	}
 
 	if (!list_empty(&mac->events))
diff --git a/net/ieee80211/softmac/ieee80211softmac_io.c b/net/ieee80211/softmac/ieee80211softmac_io.c
index febc51dbb412..cc6cd56c85b1 100644
--- a/net/ieee80211/softmac/ieee80211softmac_io.c
+++ b/net/ieee80211/softmac/ieee80211softmac_io.c
@@ -180,9 +180,21 @@ ieee80211softmac_assoc_req(struct ieee80211_assoc_request **pkt,
 	ieee80211softmac_hdr_3addr(mac, &((*pkt)->header), IEEE80211_STYPE_ASSOC_REQ, net->bssid, net->bssid);
 
 	/* Fill in capability Info */
-	(*pkt)->capability = (mac->ieee->iw_mode == IW_MODE_MASTER) || (mac->ieee->iw_mode == IW_MODE_INFRA) ?
-		cpu_to_le16(WLAN_CAPABILITY_ESS) :
-		cpu_to_le16(WLAN_CAPABILITY_IBSS);
+	switch (mac->ieee->iw_mode) {
+	case IW_MODE_INFRA:
+		(*pkt)->capability = cpu_to_le16(WLAN_CAPABILITY_ESS);
+		break;
+	case IW_MODE_ADHOC:
+		(*pkt)->capability = cpu_to_le16(WLAN_CAPABILITY_IBSS);
+		break;
+	case IW_MODE_AUTO:
+		(*pkt)->capability = net->capabilities & (WLAN_CAPABILITY_ESS|WLAN_CAPABILITY_IBSS);
+		break;
+	default:
+		/* bleh. we don't ever go to these modes */
+		printk(KERN_ERR PFX "invalid iw_mode!\n");
+		break;
+	}
 	/* Need to add this
 	(*pkt)->capability |= mac->ieee->short_slot ? 
 			cpu_to_le16(WLAN_CAPABILITY_SHORT_SLOT_TIME) : 0;
diff --git a/net/ieee80211/softmac/ieee80211softmac_module.c b/net/ieee80211/softmac/ieee80211softmac_module.c
index 60f06a31f0d1..6252be2c0db9 100644
--- a/net/ieee80211/softmac/ieee80211softmac_module.c
+++ b/net/ieee80211/softmac/ieee80211softmac_module.c
@@ -45,6 +45,8 @@ struct net_device *alloc_ieee80211softmac(int sizeof_priv)
 	softmac->ieee->handle_disassoc = ieee80211softmac_handle_disassoc;
 	softmac->scaninfo = NULL;
 
+	softmac->associnfo.scan_retry = IEEE80211SOFTMAC_ASSOC_SCAN_RETRY_LIMIT;
+
 	/* TODO: initialise all the other callbacks in the ieee struct
 	 *	 (once they're written)
 	 */
@@ -87,6 +89,8 @@ ieee80211softmac_clear_pending_work(struct ieee80211softmac_device *sm)
 	ieee80211softmac_wait_for_scan(sm);
 	
 	spin_lock_irqsave(&sm->lock, flags);
+	sm->running = 0;
+
 	/* Free all pending assoc work items */
 	cancel_delayed_work(&sm->associnfo.work);
 	
@@ -202,6 +206,8 @@ void ieee80211softmac_start(struct net_device *dev)
 		assert(0);
 	if (mac->txrates_change)
 		mac->txrates_change(dev, change, &oldrates);
+
+	mac->running = 1;
 }
 EXPORT_SYMBOL_GPL(ieee80211softmac_start);
 
diff --git a/net/ieee80211/softmac/ieee80211softmac_scan.c b/net/ieee80211/softmac/ieee80211softmac_scan.c
index bb9ab8b45d09..d31cf77498c4 100644
--- a/net/ieee80211/softmac/ieee80211softmac_scan.c
+++ b/net/ieee80211/softmac/ieee80211softmac_scan.c
@@ -47,6 +47,7 @@ ieee80211softmac_start_scan(struct ieee80211softmac_device *sm)
 	sm->scanning = 1;
 	spin_unlock_irqrestore(&sm->lock, flags);
 
+	netif_tx_disable(sm->ieee->dev);
 	ret = sm->start_scan(sm->dev);
 	if (ret) {
 		spin_lock_irqsave(&sm->lock, flags);
@@ -114,7 +115,15 @@ void ieee80211softmac_scan(void *d)
 			// TODO: is this if correct, or should we do this only if scanning from assoc request?
 			if (sm->associnfo.req_essid.len)
 				ieee80211softmac_send_mgt_frame(sm, &sm->associnfo.req_essid, IEEE80211_STYPE_PROBE_REQ, 0);
+
+			spin_lock_irqsave(&sm->lock, flags);
+			if (unlikely(!sm->running)) {
+				/* Prevent reschedule on workqueue flush */
+				spin_unlock_irqrestore(&sm->lock, flags);
+				break;
+			}
 			schedule_delayed_work(&si->softmac_scan, IEEE80211SOFTMAC_PROBE_DELAY);
+			spin_unlock_irqrestore(&sm->lock, flags);
 			return;
 		} else {
 			dprintk(PFX "Not probing Channel %d (not allowed here)\n", si->channels[current_channel_idx].channel);
@@ -239,6 +248,7 @@ void ieee80211softmac_scan_finished(struct ieee80211softmac_device *sm)
 		if (net)
 			sm->set_channel(sm->dev, net->channel);
 	}
+	netif_wake_queue(sm->ieee->dev);
 	ieee80211softmac_call_events(sm, IEEE80211SOFTMAC_EVENT_SCAN_FINISHED, NULL);
 }
 EXPORT_SYMBOL_GPL(ieee80211softmac_scan_finished);
diff --git a/net/ieee80211/softmac/ieee80211softmac_wx.c b/net/ieee80211/softmac/ieee80211softmac_wx.c
index b559aa9b5507..27edb2b5581a 100644
--- a/net/ieee80211/softmac/ieee80211softmac_wx.c
+++ b/net/ieee80211/softmac/ieee80211softmac_wx.c
@@ -27,7 +27,8 @@
 #include "ieee80211softmac_priv.h"
 
 #include <net/iw_handler.h>
-
+/* for is_broadcast_ether_addr and is_zero_ether_addr */
+#include <linux/etherdevice.h>
 
 int
 ieee80211softmac_wx_trigger_scan(struct net_device *net_dev,
@@ -41,13 +42,23 @@ ieee80211softmac_wx_trigger_scan(struct net_device *net_dev,
 EXPORT_SYMBOL_GPL(ieee80211softmac_wx_trigger_scan);
 
 
+/* if we're still scanning, return -EAGAIN so that userspace tools
+ * can get the complete scan results, otherwise return 0. */
 int
 ieee80211softmac_wx_get_scan_results(struct net_device *net_dev,
 				     struct iw_request_info *info,
 				     union iwreq_data *data,
 				     char *extra)
 {
+	unsigned long flags;
 	struct ieee80211softmac_device *sm = ieee80211_priv(net_dev);
+
+	spin_lock_irqsave(&sm->lock, flags);
+	if (sm->scanning) {
+		spin_unlock_irqrestore(&sm->lock, flags);
+		return -EAGAIN;
+	}
+	spin_unlock_irqrestore(&sm->lock, flags);
 	return ieee80211_wx_get_scan(sm->ieee, info, data, extra);
 }
 EXPORT_SYMBOL_GPL(ieee80211softmac_wx_get_scan_results);
@@ -73,7 +84,6 @@ ieee80211softmac_wx_set_essid(struct net_device *net_dev,
 			sm->associnfo.static_essid = 1;
 		}
 	}
-	sm->associnfo.scan_retry = IEEE80211SOFTMAC_ASSOC_SCAN_RETRY_LIMIT;
 
 	/* set our requested ESSID length.
 	 * If applicable, we have already copied the data in */
@@ -300,8 +310,6 @@ ieee80211softmac_wx_set_wap(struct net_device *net_dev,
 			    char *extra)
 {
 	struct ieee80211softmac_device *mac = ieee80211_priv(net_dev);
-	static const unsigned char any[] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
-	static const unsigned char off[] = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
 	unsigned long flags;
 
 	/* sanity check */
@@ -310,10 +318,17 @@ ieee80211softmac_wx_set_wap(struct net_device *net_dev,
 	}
 
 	spin_lock_irqsave(&mac->lock, flags);
-	if (!memcmp(any, data->ap_addr.sa_data, ETH_ALEN) ||
-	    !memcmp(off, data->ap_addr.sa_data, ETH_ALEN)) {
-		schedule_work(&mac->associnfo.work);
-		goto out;
+	if (is_broadcast_ether_addr(data->ap_addr.sa_data)) {
+		/* the bssid we have is not to be fixed any longer,
+		 * and we should reassociate to the best AP. */
+		mac->associnfo.bssfixed = 0;
+		/* force reassociation */
+		mac->associnfo.bssvalid = 0;
+		if (mac->associated)
+			schedule_work(&mac->associnfo.work);
+	} else if (is_zero_ether_addr(data->ap_addr.sa_data)) {
+		/* the bssid we have is no longer fixed */
+		mac->associnfo.bssfixed = 0;
         } else {
 		if (!memcmp(mac->associnfo.bssid, data->ap_addr.sa_data, ETH_ALEN)) {
 			if (mac->associnfo.associating || mac->associated) {
@@ -323,12 +338,14 @@ ieee80211softmac_wx_set_wap(struct net_device *net_dev,
 		} else {
 			/* copy new value in data->ap_addr.sa_data to bssid */
 			memcpy(mac->associnfo.bssid, data->ap_addr.sa_data, ETH_ALEN);
-		}	
+		}
+		/* tell the other code that this bssid should be used no matter what */
+		mac->associnfo.bssfixed = 1;
 		/* queue associate if new bssid or (old one again and not associated) */
 		schedule_work(&mac->associnfo.work);
         }
 
-out:
+ out:
 	spin_unlock_irqrestore(&mac->lock, flags);
 	return 0;
 }
diff --git a/net/ipv4/af_inet.c b/net/ipv4/af_inet.c
index dc206f1f914f..0a277453526b 100644
--- a/net/ipv4/af_inet.c
+++ b/net/ipv4/af_inet.c
@@ -1257,7 +1257,7 @@ out_unregister_udp_proto:
 	goto out;
 }
 
-module_init(inet_init);
+fs_initcall(inet_init);
 
 /* ------------------------------------------------------------------------ */
 
diff --git a/net/ipv4/arp.c b/net/ipv4/arp.c
index 041dadde31af..4749d504c629 100644
--- a/net/ipv4/arp.c
+++ b/net/ipv4/arp.c
@@ -928,7 +928,8 @@ static void parp_redo(struct sk_buff *skb)
  *	Receive an arp request from the device layer.
  */
 
-int arp_rcv(struct sk_buff *skb, struct net_device *dev, struct packet_type *pt, struct net_device *orig_dev)
+static int arp_rcv(struct sk_buff *skb, struct net_device *dev,
+		   struct packet_type *pt, struct net_device *orig_dev)
 {
 	struct arphdr *arp;
 
@@ -1417,7 +1418,6 @@ static int __init arp_proc_init(void)
 
 EXPORT_SYMBOL(arp_broken_ops);
 EXPORT_SYMBOL(arp_find);
-EXPORT_SYMBOL(arp_rcv);
 EXPORT_SYMBOL(arp_create);
 EXPORT_SYMBOL(arp_xmit);
 EXPORT_SYMBOL(arp_send);
diff --git a/net/ipv4/devinet.c b/net/ipv4/devinet.c
index 81c2f7885292..54419b27686f 100644
--- a/net/ipv4/devinet.c
+++ b/net/ipv4/devinet.c
@@ -1556,7 +1556,6 @@ void __init devinet_init(void)
 #endif
 }
 
-EXPORT_SYMBOL(devinet_ioctl);
 EXPORT_SYMBOL(in_dev_finish_destroy);
 EXPORT_SYMBOL(inet_select_addr);
 EXPORT_SYMBOL(inetdev_by_index);
diff --git a/net/ipv4/fib_frontend.c b/net/ipv4/fib_frontend.c
index 4e3d3811dea2..cdde96390960 100644
--- a/net/ipv4/fib_frontend.c
+++ b/net/ipv4/fib_frontend.c
@@ -666,4 +666,3 @@ void __init ip_fib_init(void)
 }
 
 EXPORT_SYMBOL(inet_addr_type);
-EXPORT_SYMBOL(ip_rt_ioctl);
diff --git a/net/ipv4/inet_hashtables.c b/net/ipv4/inet_hashtables.c
index ef7366fc132f..ee9b5515b9ae 100644
--- a/net/ipv4/inet_hashtables.c
+++ b/net/ipv4/inet_hashtables.c
@@ -43,8 +43,6 @@ struct inet_bind_bucket *inet_bind_bucket_create(kmem_cache_t *cachep,
 	return tb;
 }
 
-EXPORT_SYMBOL(inet_bind_bucket_create);
-
 /*
  * Caller must hold hashbucket lock for this tb with local BH disabled
  */
@@ -64,8 +62,6 @@ void inet_bind_hash(struct sock *sk, struct inet_bind_bucket *tb,
 	inet_csk(sk)->icsk_bind_hash = tb;
 }
 
-EXPORT_SYMBOL(inet_bind_hash);
-
 /*
  * Get rid of any references to a local port held by the given sock.
  */
diff --git a/net/ipv4/ip_input.c b/net/ipv4/ip_input.c
index 18d7fad474d7..c9026dbf4c93 100644
--- a/net/ipv4/ip_input.c
+++ b/net/ipv4/ip_input.c
@@ -337,7 +337,7 @@ static inline int ip_rcv_finish(struct sk_buff *skb)
 	 *	Initialise the virtual path cache for the packet. It describes
 	 *	how the packet travels inside Linux networking.
 	 */ 
-	if (likely(skb->dst == NULL)) {
+	if (skb->dst == NULL) {
 		int err = ip_route_input(skb, iph->daddr, iph->saddr, iph->tos,
 					 skb->dev);
 		if (unlikely(err)) {
diff --git a/net/ipv4/ip_options.c b/net/ipv4/ip_options.c
index 9bebad07bf2e..cbcae6544622 100644
--- a/net/ipv4/ip_options.c
+++ b/net/ipv4/ip_options.c
@@ -209,7 +209,7 @@ int ip_options_echo(struct ip_options * dopt, struct sk_buff * skb)
 
 void ip_options_fragment(struct sk_buff * skb) 
 {
-	unsigned char * optptr = skb->nh.raw;
+	unsigned char * optptr = skb->nh.raw + sizeof(struct iphdr);
 	struct ip_options * opt = &(IPCB(skb)->opt);
 	int  l = opt->optlen;
 	int  optlen;
diff --git a/net/ipv4/ip_output.c b/net/ipv4/ip_output.c
index 8dcba3887f04..cff9c3a72daf 100644
--- a/net/ipv4/ip_output.c
+++ b/net/ipv4/ip_output.c
@@ -904,7 +904,7 @@ alloc_new_skb:
 			 * because we have no idea what fragment will be
 			 * the last.
 			 */
-			if (datalen == length)
+			if (datalen == length + fraggap)
 				alloclen += rt->u.dst.trailer_len;
 
 			if (transhdrlen) {
diff --git a/net/ipv4/ipcomp.c b/net/ipv4/ipcomp.c
index 04a429465665..95278b22b669 100644
--- a/net/ipv4/ipcomp.c
+++ b/net/ipv4/ipcomp.c
@@ -210,7 +210,7 @@ static void ipcomp4_err(struct sk_buff *skb, u32 info)
 	    skb->h.icmph->code != ICMP_FRAG_NEEDED)
 		return;
 
-	spi = ntohl(ntohs(ipch->cpi));
+	spi = htonl(ntohs(ipch->cpi));
 	x = xfrm_state_lookup((xfrm_address_t *)&iph->daddr,
 	                      spi, IPPROTO_COMP, AF_INET);
 	if (!x)
@@ -290,11 +290,8 @@ static void ipcomp_free_scratches(void)
 	if (!scratches)
 		return;
 
-	for_each_possible_cpu(i) {
-		void *scratch = *per_cpu_ptr(scratches, i);
-		if (scratch)
-			vfree(scratch);
-	}
+	for_each_possible_cpu(i)
+		vfree(*per_cpu_ptr(scratches, i));
 
 	free_percpu(scratches);
 }
diff --git a/net/ipv4/netfilter/Kconfig b/net/ipv4/netfilter/Kconfig
index c60fd5c4ea1e..d4072533da21 100644
--- a/net/ipv4/netfilter/Kconfig
+++ b/net/ipv4/netfilter/Kconfig
@@ -170,8 +170,8 @@ config IP_NF_PPTP
 	  Documentation/modules.txt.  If unsure, say `N'.
 
 config IP_NF_H323
-	tristate  'H.323 protocol support'
-	depends on IP_NF_CONNTRACK
+	tristate  'H.323 protocol support (EXPERIMENTAL)'
+	depends on IP_NF_CONNTRACK && EXPERIMENTAL
 	help
 	  H.323 is a VoIP signalling protocol from ITU-T. As one of the most
 	  important VoIP protocols, it is widely used by voice hardware and
@@ -345,7 +345,7 @@ config IP_NF_TARGET_LOG
 	  To compile it as a module, choose M here.  If unsure, say N.
 
 config IP_NF_TARGET_ULOG
-	tristate "ULOG target support (OBSOLETE)"
+	tristate "ULOG target support"
 	depends on IP_NF_IPTABLES
 	---help---
 
diff --git a/net/ipv4/netfilter/arp_tables.c b/net/ipv4/netfilter/arp_tables.c
index c2d92f99a2b8..d0d19192026d 100644
--- a/net/ipv4/netfilter/arp_tables.c
+++ b/net/ipv4/netfilter/arp_tables.c
@@ -948,7 +948,7 @@ static int do_add_counters(void __user *user, unsigned int len)
 
 	write_lock_bh(&t->lock);
 	private = t->private;
-	if (private->number != paddc->num_counters) {
+	if (private->number != tmp.num_counters) {
 		ret = -EINVAL;
 		goto unlock_up_free;
 	}
diff --git a/net/ipv4/netfilter/ip_conntrack_core.c b/net/ipv4/netfilter/ip_conntrack_core.c
index 979a2eac6f00..a297da7bbef5 100644
--- a/net/ipv4/netfilter/ip_conntrack_core.c
+++ b/net/ipv4/netfilter/ip_conntrack_core.c
@@ -1318,6 +1318,7 @@ getorigdst(struct sock *sk, int optval, void __user *user, int *len)
 			.tuple.dst.u.tcp.port;
 		sin.sin_addr.s_addr = ct->tuplehash[IP_CT_DIR_ORIGINAL]
 			.tuple.dst.ip;
+		memset(sin.sin_zero, 0, sizeof(sin.sin_zero));
 
 		DEBUGP("SO_ORIGINAL_DST: %u.%u.%u.%u %u\n",
 		       NIPQUAD(sin.sin_addr.s_addr), ntohs(sin.sin_port));
diff --git a/net/ipv4/netfilter/ip_conntrack_helper_h323.c b/net/ipv4/netfilter/ip_conntrack_helper_h323.c
index 2c2fb700d835..518f581d39ec 100644
--- a/net/ipv4/netfilter/ip_conntrack_helper_h323.c
+++ b/net/ipv4/netfilter/ip_conntrack_helper_h323.c
@@ -162,6 +162,8 @@ static int get_tpkt_data(struct sk_buff **pskb, struct ip_conntrack *ct,
 
 	/* Validate TPKT length */
 	tpktlen = tpkt[2] * 256 + tpkt[3];
+	if (tpktlen < 4)
+		goto clear_out;
 	if (tpktlen > tcpdatalen) {
 		if (tcpdatalen == 4) {	/* Separate TPKT header */
 			/* Netmeeting sends TPKT header and data separately */
diff --git a/net/ipv4/netfilter/ip_conntrack_helper_h323_asn1.c b/net/ipv4/netfilter/ip_conntrack_helper_h323_asn1.c
index 48078002e450..26dfecadb335 100644
--- a/net/ipv4/netfilter/ip_conntrack_helper_h323_asn1.c
+++ b/net/ipv4/netfilter/ip_conntrack_helper_h323_asn1.c
@@ -2,7 +2,7 @@
  * ip_conntrack_helper_h323_asn1.c - BER and PER decoding library for H.323
  * 			      	     conntrack/NAT module.
  *
- * Copyright (c) 2006 by Jing Min Zhao <zhaojingmin@hotmail.com>
+ * Copyright (c) 2006 by Jing Min Zhao <zhaojingmin@users.sourceforge.net>
  *
  * This source code is licensed under General Public License version 2.
  *
@@ -528,14 +528,15 @@ int decode_seq(bitstr_t * bs, field_t * f, char *base, int level)
 
 			/* Decode */
 			if ((err = (Decoders[son->type]) (bs, son, base,
-							  level + 1)) >
-			    H323_ERROR_STOP)
+							  level + 1)) <
+			    H323_ERROR_NONE)
 				return err;
 
 			bs->cur = beg + len;
 			bs->bit = 0;
 		} else if ((err = (Decoders[son->type]) (bs, son, base,
-							 level + 1)))
+							 level + 1)) <
+			   H323_ERROR_NONE)
 			return err;
 	}
 
@@ -554,7 +555,7 @@ int decode_seq(bitstr_t * bs, field_t * f, char *base, int level)
 
 	/* Decode the extension components */
 	for (opt = 0; opt < bmp2_len; opt++, i++, son++) {
-		if (son->attr & STOP) {
+		if (i < f->ub && son->attr & STOP) {
 			PRINT("%*.s%s\n", (level + 1) * TAB_SIZE, " ",
 			      son->name);
 			return H323_ERROR_STOP;
@@ -584,8 +585,8 @@ int decode_seq(bitstr_t * bs, field_t * f, char *base, int level)
 		beg = bs->cur;
 
 		if ((err = (Decoders[son->type]) (bs, son, base,
-						  level + 1)) >
-		    H323_ERROR_STOP)
+						  level + 1)) <
+		    H323_ERROR_NONE)
 			return err;
 
 		bs->cur = beg + len;
@@ -660,18 +661,20 @@ int decode_seqof(bitstr_t * bs, field_t * f, char *base, int level)
 							  i <
 							  effective_count ?
 							  base : NULL,
-							  level + 1)) >
-			    H323_ERROR_STOP)
+							  level + 1)) <
+			    H323_ERROR_NONE)
 				return err;
 
 			bs->cur = beg + len;
 			bs->bit = 0;
 		} else
-		    if ((err = (Decoders[son->type]) (bs, son,
-						      i < effective_count ?
-						      base : NULL,
-						      level + 1)))
-			return err;
+			if ((err = (Decoders[son->type]) (bs, son,
+							  i <
+							  effective_count ?
+							  base : NULL,
+							  level + 1)) <
+			    H323_ERROR_NONE)
+				return err;
 
 		if (base)
 			base += son->offset;
@@ -703,6 +706,10 @@ int decode_choice(bitstr_t * bs, field_t * f, char *base, int level)
 		type = get_bits(bs, f->sz);
 	}
 
+	/* Write Type */
+	if (base)
+		*(unsigned *) base = type;
+
 	/* Check Range */
 	if (type >= f->ub) {	/* Newer version? */
 		BYTE_ALIGN(bs);
@@ -712,10 +719,6 @@ int decode_choice(bitstr_t * bs, field_t * f, char *base, int level)
 		return H323_ERROR_NONE;
 	}
 
-	/* Write Type */
-	if (base)
-		*(unsigned *) base = type;
-
 	/* Transfer to son level */
 	son = &f->fields[type];
 	if (son->attr & STOP) {
@@ -735,13 +738,14 @@ int decode_choice(bitstr_t * bs, field_t * f, char *base, int level)
 		}
 		beg = bs->cur;
 
-		if ((err = (Decoders[son->type]) (bs, son, base, level + 1)) >
-		    H323_ERROR_STOP)
+		if ((err = (Decoders[son->type]) (bs, son, base, level + 1)) <
+		    H323_ERROR_NONE)
 			return err;
 
 		bs->cur = beg + len;
 		bs->bit = 0;
-	} else if ((err = (Decoders[son->type]) (bs, son, base, level + 1)))
+	} else if ((err = (Decoders[son->type]) (bs, son, base, level + 1)) <
+		   H323_ERROR_NONE)
 		return err;
 
 	return H323_ERROR_NONE;
diff --git a/net/ipv4/netfilter/ip_conntrack_helper_pptp.c b/net/ipv4/netfilter/ip_conntrack_helper_pptp.c
index 7d3ba4302e9e..8ccfe17bb253 100644
--- a/net/ipv4/netfilter/ip_conntrack_helper_pptp.c
+++ b/net/ipv4/netfilter/ip_conntrack_helper_pptp.c
@@ -469,8 +469,8 @@ pptp_inbound_pkt(struct sk_buff **pskb,
 			DEBUGP("%s but no session\n", pptp_msg_name[msg]);
 			break;
 		}
-		if (info->sstate != PPTP_CALL_IN_REP
-		    && info->sstate != PPTP_CALL_IN_CONF) {
+		if (info->cstate != PPTP_CALL_IN_REP
+		    && info->cstate != PPTP_CALL_IN_CONF) {
 			DEBUGP("%s but never sent IN_CALL_REPLY\n",
 				pptp_msg_name[msg]);
 			break;
diff --git a/net/ipv4/netfilter/ip_conntrack_proto_sctp.c b/net/ipv4/netfilter/ip_conntrack_proto_sctp.c
index 5259abd0fb42..0416073c5600 100644
--- a/net/ipv4/netfilter/ip_conntrack_proto_sctp.c
+++ b/net/ipv4/netfilter/ip_conntrack_proto_sctp.c
@@ -235,12 +235,15 @@ static int do_basic_checks(struct ip_conntrack *conntrack,
 			flag = 1;
 		}
 
-		/* Cookie Ack/Echo chunks not the first OR 
-		   Init / Init Ack / Shutdown compl chunks not the only chunks */
-		if ((sch->type == SCTP_CID_COOKIE_ACK 
+		/*
+		 * Cookie Ack/Echo chunks not the first OR
+		 * Init / Init Ack / Shutdown compl chunks not the only chunks
+		 * OR zero-length.
+		 */
+		if (((sch->type == SCTP_CID_COOKIE_ACK
 			|| sch->type == SCTP_CID_COOKIE_ECHO
 			|| flag)
-		     && count !=0 ) {
+		      && count !=0) || !sch->length) {
 			DEBUGP("Basic checks failed\n");
 			return 1;
 		}
diff --git a/net/ipv4/netfilter/ip_nat_proto_gre.c b/net/ipv4/netfilter/ip_nat_proto_gre.c
index 6c4899d8046a..96ceabaec402 100644
--- a/net/ipv4/netfilter/ip_nat_proto_gre.c
+++ b/net/ipv4/netfilter/ip_nat_proto_gre.c
@@ -49,15 +49,15 @@ gre_in_range(const struct ip_conntrack_tuple *tuple,
 	     const union ip_conntrack_manip_proto *min,
 	     const union ip_conntrack_manip_proto *max)
 {
-	u_int32_t key;
+	__be16 key;
 
 	if (maniptype == IP_NAT_MANIP_SRC)
 		key = tuple->src.u.gre.key;
 	else
 		key = tuple->dst.u.gre.key;
 
-	return ntohl(key) >= ntohl(min->gre.key)
-		&& ntohl(key) <= ntohl(max->gre.key);
+	return ntohs(key) >= ntohs(min->gre.key)
+		&& ntohs(key) <= ntohs(max->gre.key);
 }
 
 /* generate unique tuple ... */
@@ -81,14 +81,14 @@ gre_unique_tuple(struct ip_conntrack_tuple *tuple,
 		min = 1;
 		range_size = 0xffff;
 	} else {
-		min = ntohl(range->min.gre.key);
-		range_size = ntohl(range->max.gre.key) - min + 1;
+		min = ntohs(range->min.gre.key);
+		range_size = ntohs(range->max.gre.key) - min + 1;
 	}
 
 	DEBUGP("min = %u, range_size = %u\n", min, range_size); 
 
 	for (i = 0; i < range_size; i++, key++) {
-		*keyptr = htonl(min + key % range_size);
+		*keyptr = htons(min + key % range_size);
 		if (!ip_nat_used_tuple(tuple, conntrack))
 			return 1;
 	}
diff --git a/net/ipv4/netfilter/ip_nat_snmp_basic.c b/net/ipv4/netfilter/ip_nat_snmp_basic.c
index c62253845538..c33244263b90 100644
--- a/net/ipv4/netfilter/ip_nat_snmp_basic.c
+++ b/net/ipv4/netfilter/ip_nat_snmp_basic.c
@@ -768,6 +768,7 @@ static unsigned char snmp_object_decode(struct asn1_ctx *ctx,
 			len *= sizeof(unsigned long);
 			*obj = kmalloc(sizeof(struct snmp_object) + len, GFP_ATOMIC);
 			if (*obj == NULL) {
+				kfree(lp);
 				kfree(id);
 				if (net_ratelimit())
 					printk("OOM in bsalg (%d)\n", __LINE__);
@@ -1003,12 +1004,12 @@ static unsigned char snmp_trap_decode(struct asn1_ctx *ctx,
 		
 	return 1;
 
+err_addr_free:
+	kfree((unsigned long *)trap->ip_address);
+
 err_id_free:
 	kfree(trap->id);
 
-err_addr_free:
-	kfree((unsigned long *)trap->ip_address);
-	
 	return 0;
 }
 
@@ -1126,11 +1127,10 @@ static int snmp_parse_mangle(unsigned char *msg,
 		struct snmp_v1_trap trap;
 		unsigned char ret = snmp_trap_decode(&ctx, &trap, map, check);
 		
-		/* Discard trap allocations regardless */
-		kfree(trap.id);
-		kfree((unsigned long *)trap.ip_address);
-		
-		if (!ret)
+		if (ret) {
+			kfree(trap.id);
+			kfree((unsigned long *)trap.ip_address);
+		} else 
 			return ret;
 		
 	} else {
diff --git a/net/ipv4/netfilter/ip_nat_standalone.c b/net/ipv4/netfilter/ip_nat_standalone.c
index 8f760b28617e..67e676783da9 100644
--- a/net/ipv4/netfilter/ip_nat_standalone.c
+++ b/net/ipv4/netfilter/ip_nat_standalone.c
@@ -219,8 +219,10 @@ ip_nat_out(unsigned int hooknum,
 	   const struct net_device *out,
 	   int (*okfn)(struct sk_buff *))
 {
+#ifdef CONFIG_XFRM
 	struct ip_conntrack *ct;
 	enum ip_conntrack_info ctinfo;
+#endif
 	unsigned int ret;
 
 	/* root is playing with raw sockets. */
diff --git a/net/ipv4/netfilter/ip_tables.c b/net/ipv4/netfilter/ip_tables.c
index d25ac8ba6eba..cee3397ec277 100644
--- a/net/ipv4/netfilter/ip_tables.c
+++ b/net/ipv4/netfilter/ip_tables.c
@@ -956,15 +956,16 @@ struct compat_ipt_standard_target
 	compat_int_t verdict;
 };
 
-#define IPT_ST_OFFSET	(sizeof(struct ipt_standard_target) - \
-				sizeof(struct compat_ipt_standard_target))
-
 struct compat_ipt_standard
 {
 	struct compat_ipt_entry entry;
 	struct compat_ipt_standard_target target;
 };
 
+#define IPT_ST_LEN		XT_ALIGN(sizeof(struct ipt_standard_target))
+#define IPT_ST_COMPAT_LEN	COMPAT_XT_ALIGN(sizeof(struct compat_ipt_standard_target))
+#define IPT_ST_OFFSET		(IPT_ST_LEN - IPT_ST_COMPAT_LEN)
+
 static int compat_ipt_standard_fn(void *target,
 		void **dstptr, int *size, int convert)
 {
@@ -975,35 +976,29 @@ static int compat_ipt_standard_fn(void *target,
 	ret = 0;
 	switch (convert) {
 		case COMPAT_TO_USER:
-			pst = (struct ipt_standard_target *)target;
+			pst = target;
 			memcpy(&compat_st.target, &pst->target,
-					sizeof(struct ipt_entry_target));
+				sizeof(compat_st.target));
 			compat_st.verdict = pst->verdict;
 			if (compat_st.verdict > 0)
 				compat_st.verdict -=
 					compat_calc_jump(compat_st.verdict);
-			compat_st.target.u.user.target_size =
-			sizeof(struct compat_ipt_standard_target);
-			if (__copy_to_user(*dstptr, &compat_st,
-				sizeof(struct compat_ipt_standard_target)))
+			compat_st.target.u.user.target_size = IPT_ST_COMPAT_LEN;
+			if (copy_to_user(*dstptr, &compat_st, IPT_ST_COMPAT_LEN))
 				ret = -EFAULT;
 			*size -= IPT_ST_OFFSET;
-			*dstptr += sizeof(struct compat_ipt_standard_target);
+			*dstptr += IPT_ST_COMPAT_LEN;
 			break;
 		case COMPAT_FROM_USER:
-			pcompat_st =
-				(struct compat_ipt_standard_target *)target;
-			memcpy(&st.target, &pcompat_st->target,
-					sizeof(struct ipt_entry_target));
+			pcompat_st = target;
+			memcpy(&st.target, &pcompat_st->target, IPT_ST_COMPAT_LEN);
 			st.verdict = pcompat_st->verdict;
 			if (st.verdict > 0)
 				st.verdict += compat_calc_jump(st.verdict);
-			st.target.u.user.target_size =
-			sizeof(struct ipt_standard_target);
-			memcpy(*dstptr, &st,
-					sizeof(struct ipt_standard_target));
+			st.target.u.user.target_size = IPT_ST_LEN;
+			memcpy(*dstptr, &st, IPT_ST_LEN);
 			*size += IPT_ST_OFFSET;
-			*dstptr += sizeof(struct ipt_standard_target);
+			*dstptr += IPT_ST_LEN;
 			break;
 		case COMPAT_CALC_SIZE:
 			*size += IPT_ST_OFFSET;
@@ -1446,7 +1441,7 @@ static int compat_copy_entry_to_user(struct ipt_entry *e,
 	ret = -EFAULT;
 	origsize = *size;
 	ce = (struct compat_ipt_entry __user *)*dstptr;
-	if (__copy_to_user(ce, e, sizeof(struct ipt_entry)))
+	if (copy_to_user(ce, e, sizeof(struct ipt_entry)))
 		goto out;
 
 	*dstptr += sizeof(struct compat_ipt_entry);
@@ -1464,9 +1459,9 @@ static int compat_copy_entry_to_user(struct ipt_entry *e,
 		goto out;
 	ret = -EFAULT;
 	next_offset = e->next_offset - (origsize - *size);
-	if (__put_user(target_offset, &ce->target_offset))
+	if (put_user(target_offset, &ce->target_offset))
 		goto out;
-	if (__put_user(next_offset, &ce->next_offset))
+	if (put_user(next_offset, &ce->next_offset))
 		goto out;
 	return 0;
 out:
diff --git a/net/ipv4/netfilter/ipt_LOG.c b/net/ipv4/netfilter/ipt_LOG.c
index 39fd4c2a2386..b98f7b08b084 100644
--- a/net/ipv4/netfilter/ipt_LOG.c
+++ b/net/ipv4/netfilter/ipt_LOG.c
@@ -428,7 +428,7 @@ ipt_log_target(struct sk_buff **pskb,
 
 	if (loginfo->logflags & IPT_LOG_NFLOG)
 		nf_log_packet(PF_INET, hooknum, *pskb, in, out, &li,
-		              loginfo->prefix);
+		              "%s", loginfo->prefix);
 	else
 		ipt_log_packet(PF_INET, hooknum, *pskb, in, out, &li,
 		               loginfo->prefix);
diff --git a/net/ipv4/netfilter/ipt_recent.c b/net/ipv4/netfilter/ipt_recent.c
index 143843285702..b847ee409efb 100644
--- a/net/ipv4/netfilter/ipt_recent.c
+++ b/net/ipv4/netfilter/ipt_recent.c
@@ -821,6 +821,7 @@ checkentry(const char *tablename,
 	/* Create our proc 'status' entry. */
 	curr_table->status_proc = create_proc_entry(curr_table->name, ip_list_perms, proc_net_ipt_recent);
 	if (!curr_table->status_proc) {
+		vfree(hold);
 		printk(KERN_INFO RECENT_NAME ": checkentry: unable to allocate for /proc entry.\n");
 		/* Destroy the created table */
 		spin_lock_bh(&recent_lock);
@@ -845,7 +846,6 @@ checkentry(const char *tablename,
 		spin_unlock_bh(&recent_lock);
 		vfree(curr_table->time_info);
 		vfree(curr_table->hash_table);
-		vfree(hold);
 		vfree(curr_table->table);
 		vfree(curr_table);
 		return 0;
diff --git a/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c b/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c
index 5bc9f64d7b5b..77d974443c7b 100644
--- a/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c
+++ b/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c
@@ -348,6 +348,7 @@ getorigdst(struct sock *sk, int optval, void __user *user, int *len)
 			.tuple.dst.u.tcp.port;
 		sin.sin_addr.s_addr = ct->tuplehash[IP_CT_DIR_ORIGINAL]
 			.tuple.dst.u3.ip;
+		memset(sin.sin_zero, 0, sizeof(sin.sin_zero));
 
 		DEBUGP("SO_ORIGINAL_DST: %u.%u.%u.%u %u\n",
 		       NIPQUAD(sin.sin_addr.s_addr), ntohs(sin.sin_port));
diff --git a/net/ipv4/route.c b/net/ipv4/route.c
index ff434821909f..cc9423de7311 100644
--- a/net/ipv4/route.c
+++ b/net/ipv4/route.c
@@ -2741,7 +2741,10 @@ int inet_rtm_getroute(struct sk_buff *in_skb, struct nlmsghdr* nlh, void *arg)
 	/* Reserve room for dummy headers, this skb can pass
 	   through good chunk of routing engine.
 	 */
-	skb->mac.raw = skb->data;
+	skb->mac.raw = skb->nh.raw = skb->data;
+
+	/* Bugfix: need to give ip_route_input enough of an IP header to not gag. */
+	skb->nh.iph->protocol = IPPROTO_ICMP;
 	skb_reserve(skb, MAX_HEADER + sizeof(struct iphdr));
 
 	if (rta[RTA_SRC - 1])
diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c
index 87f68e787d0c..e2b7b8055037 100644
--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -1468,6 +1468,7 @@ void tcp_close(struct sock *sk, long timeout)
 {
 	struct sk_buff *skb;
 	int data_was_unread = 0;
+	int state;
 
 	lock_sock(sk);
 	sk->sk_shutdown = SHUTDOWN_MASK;
@@ -1544,6 +1545,11 @@ void tcp_close(struct sock *sk, long timeout)
 	sk_stream_wait_close(sk, timeout);
 
 adjudge_to_death:
+	state = sk->sk_state;
+	sock_hold(sk);
+	sock_orphan(sk);
+	atomic_inc(sk->sk_prot->orphan_count);
+
 	/* It is the last release_sock in its life. It will remove backlog. */
 	release_sock(sk);
 
@@ -1555,8 +1561,9 @@ adjudge_to_death:
 	bh_lock_sock(sk);
 	BUG_TRAP(!sock_owned_by_user(sk));
 
-	sock_hold(sk);
-	sock_orphan(sk);
+	/* Have we already been destroyed by a softirq or backlog? */
+	if (state != TCP_CLOSE && sk->sk_state == TCP_CLOSE)
+		goto out;
 
 	/*	This is a (useful) BSD violating of the RFC. There is a
 	 *	problem with TCP as specified in that the other end could
@@ -1584,7 +1591,6 @@ adjudge_to_death:
 			if (tmo > TCP_TIMEWAIT_LEN) {
 				inet_csk_reset_keepalive_timer(sk, tcp_fin_time(sk));
 			} else {
-				atomic_inc(sk->sk_prot->orphan_count);
 				tcp_time_wait(sk, TCP_FIN_WAIT2, tmo);
 				goto out;
 			}
@@ -1603,7 +1609,6 @@ adjudge_to_death:
 			NET_INC_STATS_BH(LINUX_MIB_TCPABORTONMEMORY);
 		}
 	}
-	atomic_inc(sk->sk_prot->orphan_count);
 
 	if (sk->sk_state == TCP_CLOSE)
 		inet_csk_destroy_sock(sk);
diff --git a/net/ipv4/tcp_highspeed.c b/net/ipv4/tcp_highspeed.c
index e0e9d1383c7c..ba7c63ca5bb1 100644
--- a/net/ipv4/tcp_highspeed.c
+++ b/net/ipv4/tcp_highspeed.c
@@ -135,10 +135,11 @@ static void hstcp_cong_avoid(struct sock *sk, u32 adk, u32 rtt,
 
 		/* Do additive increase */
 		if (tp->snd_cwnd < tp->snd_cwnd_clamp) {
-			tp->snd_cwnd_cnt += ca->ai;
+			/* cwnd = cwnd + a(w) / cwnd */
+			tp->snd_cwnd_cnt += ca->ai + 1;
 			if (tp->snd_cwnd_cnt >= tp->snd_cwnd) {
-				tp->snd_cwnd++;
 				tp->snd_cwnd_cnt -= tp->snd_cwnd;
+				tp->snd_cwnd++;
 			}
 		}
 	}
diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c
index 195d83584558..4a538bc1683d 100644
--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -1662,6 +1662,8 @@ static void tcp_update_scoreboard(struct sock *sk, struct tcp_sock *tp)
 			if (!(TCP_SKB_CB(skb)->sacked&TCPCB_TAGBITS)) {
 				TCP_SKB_CB(skb)->sacked |= TCPCB_LOST;
 				tp->lost_out += tcp_skb_pcount(skb);
+				if (IsReno(tp))
+					tcp_remove_reno_sacks(sk, tp, tcp_skb_pcount(skb) + 1);
 
 				/* clear xmit_retrans hint */
 				if (tp->retransmit_skb_hint &&
@@ -4559,7 +4561,6 @@ discard:
 
 EXPORT_SYMBOL(sysctl_tcp_ecn);
 EXPORT_SYMBOL(sysctl_tcp_reordering);
-EXPORT_SYMBOL(sysctl_tcp_abc);
 EXPORT_SYMBOL(tcp_parse_options);
 EXPORT_SYMBOL(tcp_rcv_established);
 EXPORT_SYMBOL(tcp_rcv_state_process);
diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c
index 9e85c0416109..672950e54c49 100644
--- a/net/ipv4/tcp_ipv4.c
+++ b/net/ipv4/tcp_ipv4.c
@@ -1859,5 +1859,4 @@ EXPORT_SYMBOL(tcp_proc_unregister);
 #endif
 EXPORT_SYMBOL(sysctl_local_port_range);
 EXPORT_SYMBOL(sysctl_tcp_low_latency);
-EXPORT_SYMBOL(sysctl_tcp_tw_reuse);
 
diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c
index 9d79546d384e..f33c9dddaa12 100644
--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -59,9 +59,6 @@ int sysctl_tcp_tso_win_divisor = 3;
 int sysctl_tcp_mtu_probing = 0;
 int sysctl_tcp_base_mss = 512;
 
-EXPORT_SYMBOL(sysctl_tcp_mtu_probing);
-EXPORT_SYMBOL(sysctl_tcp_base_mss);
-
 static void update_send_head(struct sock *sk, struct tcp_sock *tp,
 			     struct sk_buff *skb)
 {
@@ -468,7 +465,7 @@ static int tcp_transmit_skb(struct sock *sk, struct sk_buff *skb, int clone_it,
 	TCP_INC_STATS(TCP_MIB_OUTSEGS);
 
 	err = icsk->icsk_af_ops->queue_xmit(skb, 0);
-	if (unlikely(err <= 0))
+	if (likely(err <= 0))
 		return err;
 
 	tcp_enter_cwr(sk);
@@ -536,6 +533,7 @@ int tcp_fragment(struct sock *sk, struct sk_buff *skb, u32 len, unsigned int mss
 	struct tcp_sock *tp = tcp_sk(sk);
 	struct sk_buff *buff;
 	int nsize, old_factor;
+	int nlen;
 	u16 flags;
 
 	BUG_ON(len > skb->len);
@@ -554,7 +552,11 @@ int tcp_fragment(struct sock *sk, struct sk_buff *skb, u32 len, unsigned int mss
 	buff = sk_stream_alloc_skb(sk, nsize, GFP_ATOMIC);
 	if (buff == NULL)
 		return -ENOMEM; /* We'll just try again later. */
+
 	sk_charge_skb(sk, buff);
+	nlen = skb->len - len - nsize;
+	buff->truesize += nlen;
+	skb->truesize -= nlen;
 
 	/* Correct the sequence numbers. */
 	TCP_SKB_CB(buff)->seq = TCP_SKB_CB(skb)->seq + len;
@@ -640,7 +642,7 @@ int tcp_fragment(struct sock *sk, struct sk_buff *skb, u32 len, unsigned int mss
  * eventually). The difference is that pulled data not copied, but
  * immediately discarded.
  */
-static unsigned char *__pskb_trim_head(struct sk_buff *skb, int len)
+static void __pskb_trim_head(struct sk_buff *skb, int len)
 {
 	int i, k, eat;
 
@@ -665,7 +667,6 @@ static unsigned char *__pskb_trim_head(struct sk_buff *skb, int len)
 	skb->tail = skb->data;
 	skb->data_len -= len;
 	skb->len = skb->data_len;
-	return skb->tail;
 }
 
 int tcp_trim_head(struct sock *sk, struct sk_buff *skb, u32 len)
@@ -674,12 +675,11 @@ int tcp_trim_head(struct sock *sk, struct sk_buff *skb, u32 len)
 	    pskb_expand_head(skb, 0, 0, GFP_ATOMIC))
 		return -ENOMEM;
 
-	if (len <= skb_headlen(skb)) {
+	/* If len == headlen, we avoid __skb_pull to preserve alignment. */
+	if (unlikely(len < skb_headlen(skb)))
 		__skb_pull(skb, len);
-	} else {
-		if (__pskb_trim_head(skb, len-skb_headlen(skb)) == NULL)
-			return -ENOMEM;
-	}
+	else
+		__pskb_trim_head(skb, len - skb_headlen(skb));
 
 	TCP_SKB_CB(skb)->seq += len;
 	skb->ip_summed = CHECKSUM_HW;
@@ -1040,7 +1040,8 @@ static int tso_fragment(struct sock *sk, struct sk_buff *skb, unsigned int len,
 	if (unlikely(buff == NULL))
 		return -ENOMEM;
 
-	buff->truesize = nlen;
+	sk_charge_skb(sk, buff);
+	buff->truesize += nlen;
 	skb->truesize -= nlen;
 
 	/* Correct the sequence numbers. */
diff --git a/net/ipv4/xfrm4_output.c b/net/ipv4/xfrm4_output.c
index 32ad229b4fed..4ef8efaf6a67 100644
--- a/net/ipv4/xfrm4_output.c
+++ b/net/ipv4/xfrm4_output.c
@@ -62,7 +62,7 @@ static void xfrm4_encap(struct sk_buff *skb)
 	top_iph->frag_off = (flags & XFRM_STATE_NOPMTUDISC) ?
 		0 : (iph->frag_off & htons(IP_DF));
 	if (!top_iph->frag_off)
-		__ip_select_ident(top_iph, dst, 0);
+		__ip_select_ident(top_iph, dst->child, 0);
 
 	top_iph->ttl = dst_metric(dst->child, RTAX_HOPLIMIT);
 
diff --git a/net/ipv4/xfrm4_policy.c b/net/ipv4/xfrm4_policy.c
index f285bbf296e2..8604c747bca5 100644
--- a/net/ipv4/xfrm4_policy.c
+++ b/net/ipv4/xfrm4_policy.c
@@ -221,7 +221,7 @@ _decode_session4(struct sk_buff *skb, struct flowi *fl)
 			if (pskb_may_pull(skb, xprth + 4 - skb->data)) {
 				u16 *ipcomp_hdr = (u16 *)xprth;
 
-				fl->fl_ipsec_spi = ntohl(ntohs(ipcomp_hdr[1]));
+				fl->fl_ipsec_spi = htonl(ntohs(ipcomp_hdr[1]));
 			}
 			break;
 		default:
diff --git a/net/ipv6/exthdrs.c b/net/ipv6/exthdrs.c
index 2a1e7e45b890..a18d4256372c 100644
--- a/net/ipv6/exthdrs.c
+++ b/net/ipv6/exthdrs.c
@@ -485,15 +485,27 @@ static struct tlvtype_proc tlvprochopopt_lst[] = {
 	{ -1, }
 };
 
-int ipv6_parse_hopopts(struct sk_buff *skb, int nhoff)
+int ipv6_parse_hopopts(struct sk_buff *skb)
 {
 	struct inet6_skb_parm *opt = IP6CB(skb);
 
+	/*
+	 * skb->nh.raw is equal to skb->data, and
+	 * skb->h.raw - skb->nh.raw is always equal to
+	 * sizeof(struct ipv6hdr) by definition of
+	 * hop-by-hop options.
+	 */
+	if (!pskb_may_pull(skb, sizeof(struct ipv6hdr) + 8) ||
+	    !pskb_may_pull(skb, sizeof(struct ipv6hdr) + ((skb->h.raw[1] + 1) << 3))) {
+		kfree_skb(skb);
+		return -1;
+	}
+
 	opt->hop = sizeof(struct ipv6hdr);
 	if (ip6_parse_tlv(tlvprochopopt_lst, skb)) {
 		skb->h.raw += (skb->h.raw[1]+1)<<3;
 		opt->nhoff = sizeof(struct ipv6hdr);
-		return sizeof(struct ipv6hdr);
+		return 1;
 	}
 	return -1;
 }
diff --git a/net/ipv6/inet6_connection_sock.c b/net/ipv6/inet6_connection_sock.c
index f8f3a37a1494..eb2865d5ae28 100644
--- a/net/ipv6/inet6_connection_sock.c
+++ b/net/ipv6/inet6_connection_sock.c
@@ -173,6 +173,7 @@ int inet6_csk_xmit(struct sk_buff *skb, int ipfragok)
 
 		if (err) {
 			sk->sk_err_soft = -err;
+			kfree_skb(skb);
 			return err;
 		}
 
@@ -181,6 +182,7 @@ int inet6_csk_xmit(struct sk_buff *skb, int ipfragok)
 
 		if ((err = xfrm_lookup(&dst, &fl, sk, 0)) < 0) {
 			sk->sk_route_caps = 0;
+			kfree_skb(skb);
 			return err;
 		}
 
diff --git a/net/ipv6/ip6_input.c b/net/ipv6/ip6_input.c
index 29f73592e68e..aceee252503d 100644
--- a/net/ipv6/ip6_input.c
+++ b/net/ipv6/ip6_input.c
@@ -114,11 +114,10 @@ int ipv6_rcv(struct sk_buff *skb, struct net_device *dev, struct packet_type *pt
 	}
 
 	if (hdr->nexthdr == NEXTHDR_HOP) {
-		if (ipv6_parse_hopopts(skb, IP6CB(skb)->nhoff) < 0) {
+		if (ipv6_parse_hopopts(skb) < 0) {
 			IP6_INC_STATS_BH(IPSTATS_MIB_INHDRERRORS);
 			return 0;
 		}
-		hdr = skb->nh.ipv6h;
 	}
 
 	return NF_HOOK(PF_INET6,NF_IP6_PRE_ROUTING, skb, dev, NULL, ip6_rcv_finish);
diff --git a/net/ipv6/ipcomp6.c b/net/ipv6/ipcomp6.c
index 05eb67def39f..48636436028a 100644
--- a/net/ipv6/ipcomp6.c
+++ b/net/ipv6/ipcomp6.c
@@ -208,7 +208,7 @@ static void ipcomp6_err(struct sk_buff *skb, struct inet6_skb_parm *opt,
 	if (type != ICMPV6_DEST_UNREACH && type != ICMPV6_PKT_TOOBIG)
 		return;
 
-	spi = ntohl(ntohs(ipcomph->cpi));
+	spi = htonl(ntohs(ipcomph->cpi));
 	x = xfrm_state_lookup((xfrm_address_t *)&iph->daddr, spi, IPPROTO_COMP, AF_INET6);
 	if (!x)
 		return;
diff --git a/net/ipv6/netfilter/ip6_tables.c b/net/ipv6/netfilter/ip6_tables.c
index 642b4b11464f..2e72f89a7019 100644
--- a/net/ipv6/netfilter/ip6_tables.c
+++ b/net/ipv6/netfilter/ip6_tables.c
@@ -288,19 +288,6 @@ ip6t_do_table(struct sk_buff **pskb,
 	table_base = (void *)private->entries[smp_processor_id()];
 	e = get_entry(table_base, private->hook_entry[hook]);
 
-#ifdef CONFIG_NETFILTER_DEBUG
-	/* Check noone else using our table */
-	if (((struct ip6t_entry *)table_base)->comefrom != 0xdead57ac
-	    && ((struct ip6t_entry *)table_base)->comefrom != 0xeeeeeeec) {
-		printk("ASSERT: CPU #%u, %s comefrom(%p) = %X\n",
-		       smp_processor_id(),
-		       table->name,
-		       &((struct ip6t_entry *)table_base)->comefrom,
-		       ((struct ip6t_entry *)table_base)->comefrom);
-	}
-	((struct ip6t_entry *)table_base)->comefrom = 0x57acc001;
-#endif
-
 	/* For return from builtin chain */
 	back = get_entry(table_base, private->underflow[hook]);
 
@@ -1116,7 +1103,7 @@ do_add_counters(void __user *user, unsigned int len)
 
 	write_lock_bh(&t->lock);
 	private = t->private;
-	if (private->number != paddc->num_counters) {
+	if (private->number != tmp.num_counters) {
 		ret = -EINVAL;
 		goto unlock_up_free;
 	}
diff --git a/net/ipv6/netfilter/ip6t_LOG.c b/net/ipv6/netfilter/ip6t_LOG.c
index a96c0de14b00..73c6300109d6 100644
--- a/net/ipv6/netfilter/ip6t_LOG.c
+++ b/net/ipv6/netfilter/ip6t_LOG.c
@@ -439,7 +439,7 @@ ip6t_log_target(struct sk_buff **pskb,
 
 	if (loginfo->logflags & IP6T_LOG_NFLOG)
 		nf_log_packet(PF_INET6, hooknum, *pskb, in, out, &li,
-		              loginfo->prefix);
+		              "%s", loginfo->prefix);
 	else
 		ip6t_log_packet(PF_INET6, hooknum, *pskb, in, out, &li,
 		                loginfo->prefix);
diff --git a/net/ipv6/netfilter/ip6t_eui64.c b/net/ipv6/netfilter/ip6t_eui64.c
index 94dbdb8b458d..4f6b84c8f4ab 100644
--- a/net/ipv6/netfilter/ip6t_eui64.c
+++ b/net/ipv6/netfilter/ip6t_eui64.c
@@ -40,7 +40,7 @@ match(const struct sk_buff *skb,
 
 	memset(eui64, 0, sizeof(eui64));
 
-	if (eth_hdr(skb)->h_proto == ntohs(ETH_P_IPV6)) {
+	if (eth_hdr(skb)->h_proto == htons(ETH_P_IPV6)) {
 		if (skb->nh.ipv6h->version == 0x6) {
 			memcpy(eui64, eth_hdr(skb)->h_source, 3);
 			memcpy(eui64 + 5, eth_hdr(skb)->h_source + 3, 3);
diff --git a/net/ipv6/route.c b/net/ipv6/route.c
index 79078747a646..8a777932786d 100644
--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -280,10 +280,13 @@ static int inline rt6_check_neigh(struct rt6_info *rt)
 {
 	struct neighbour *neigh = rt->rt6i_nexthop;
 	int m = 0;
-	if (neigh) {
+	if (rt->rt6i_flags & RTF_NONEXTHOP ||
+	    !(rt->rt6i_flags & RTF_GATEWAY))
+		m = 1;
+	else if (neigh) {
 		read_lock_bh(&neigh->lock);
 		if (neigh->nud_state & NUD_VALID)
-			m = 1;
+			m = 2;
 		read_unlock_bh(&neigh->lock);
 	}
 	return m;
@@ -292,15 +295,18 @@ static int inline rt6_check_neigh(struct rt6_info *rt)
 static int rt6_score_route(struct rt6_info *rt, int oif,
 			   int strict)
 {
-	int m = rt6_check_dev(rt, oif);
+	int m, n;
+		
+	m = rt6_check_dev(rt, oif);
 	if (!m && (strict & RT6_SELECT_F_IFACE))
 		return -1;
 #ifdef CONFIG_IPV6_ROUTER_PREF
 	m |= IPV6_DECODE_PREF(IPV6_EXTRACT_PREF(rt->rt6i_flags)) << 2;
 #endif
-	if (rt6_check_neigh(rt))
+	n = rt6_check_neigh(rt);
+	if (n > 1)
 		m |= 16;
-	else if (strict & RT6_SELECT_F_REACHABLE)
+	else if (!n && strict & RT6_SELECT_F_REACHABLE)
 		return -1;
 	return m;
 }
@@ -317,7 +323,7 @@ static struct rt6_info *rt6_select(struct rt6_info **head, int oif,
 		  __FUNCTION__, head, head ? *head : NULL, oif);
 
 	for (rt = rt0, metric = rt0->rt6i_metric;
-	     rt && rt->rt6i_metric == metric;
+	     rt && rt->rt6i_metric == metric && (!last || rt != rt0);
 	     rt = rt->u.next) {
 		int m;
 
@@ -343,9 +349,12 @@ static struct rt6_info *rt6_select(struct rt6_info **head, int oif,
 	    (strict & RT6_SELECT_F_REACHABLE) &&
 	    last && last != rt0) {
 		/* no entries matched; do round-robin */
+		static spinlock_t lock = SPIN_LOCK_UNLOCKED;
+		spin_lock(&lock);
 		*head = rt0->u.next;
 		rt0->u.next = last->u.next;
 		last->u.next = rt0;
+		spin_unlock(&lock);
 	}
 
 	RT6_TRACE("%s() => %p, score=%d\n",
diff --git a/net/ipv6/xfrm6_policy.c b/net/ipv6/xfrm6_policy.c
index 91cce8b2d7a5..88c840f1beb6 100644
--- a/net/ipv6/xfrm6_policy.c
+++ b/net/ipv6/xfrm6_policy.c
@@ -191,16 +191,18 @@ error:
 static inline void
 _decode_session6(struct sk_buff *skb, struct flowi *fl)
 {
-	u16 offset = sizeof(struct ipv6hdr);
+	u16 offset = skb->h.raw - skb->nh.raw;
 	struct ipv6hdr *hdr = skb->nh.ipv6h;
-	struct ipv6_opt_hdr *exthdr = (struct ipv6_opt_hdr*)(skb->nh.raw + offset);
-	u8 nexthdr = skb->nh.ipv6h->nexthdr;
+	struct ipv6_opt_hdr *exthdr;
+	u8 nexthdr = skb->nh.raw[IP6CB(skb)->nhoff];
 
 	memset(fl, 0, sizeof(struct flowi));
 	ipv6_addr_copy(&fl->fl6_dst, &hdr->daddr);
 	ipv6_addr_copy(&fl->fl6_src, &hdr->saddr);
 
 	while (pskb_may_pull(skb, skb->nh.raw + offset + 1 - skb->data)) {
+		exthdr = (struct ipv6_opt_hdr*)(skb->nh.raw + offset);
+
 		switch (nexthdr) {
 		case NEXTHDR_ROUTING:
 		case NEXTHDR_HOP:
diff --git a/net/ipx/af_ipx.c b/net/ipx/af_ipx.c
index 2dbf134d5266..811d998725bc 100644
--- a/net/ipx/af_ipx.c
+++ b/net/ipx/af_ipx.c
@@ -944,9 +944,9 @@ out:
 	return rc;
 }
 
-static int ipx_map_frame_type(unsigned char type)
+static __be16 ipx_map_frame_type(unsigned char type)
 {
-	int rc = 0;
+	__be16 rc = 0;
 
 	switch (type) {
 	case IPX_FRAME_ETHERII:	rc = htons(ETH_P_IPX);		break;
diff --git a/net/ipx/ipx_route.c b/net/ipx/ipx_route.c
index 67774448efd9..a394c6fe19a2 100644
--- a/net/ipx/ipx_route.c
+++ b/net/ipx/ipx_route.c
@@ -119,7 +119,7 @@ out:
 	return rc;
 }
 
-static int ipxrtr_delete(long net)
+static int ipxrtr_delete(__u32 net)
 {
 	struct ipx_route *r, *tmp;
 	int rc;
diff --git a/net/irda/iriap.c b/net/irda/iriap.c
index 254f90746900..2d2e2b1919f4 100644
--- a/net/irda/iriap.c
+++ b/net/irda/iriap.c
@@ -544,7 +544,8 @@ static void iriap_getvaluebyclass_response(struct iriap_cb *self,
 {
 	struct sk_buff *tx_skb;
 	int n;
-	__u32 tmp_be32, tmp_be16;
+	__u32 tmp_be32;
+	__be16 tmp_be16;
 	__u8 *fp;
 
 	IRDA_DEBUG(4, "%s()\n", __FUNCTION__);
diff --git a/net/irda/irias_object.c b/net/irda/irias_object.c
index c6d169fbdceb..82e665c79991 100644
--- a/net/irda/irias_object.c
+++ b/net/irda/irias_object.c
@@ -257,7 +257,6 @@ struct ias_attrib *irias_find_attrib(struct ias_object *obj, char *name)
 	/* Unsafe (locking), attrib might change */
 	return attrib;
 }
-EXPORT_SYMBOL(irias_find_attrib);
 
 /*
  * Function irias_add_attribute (obj, attrib)
@@ -484,7 +483,6 @@ struct ias_value *irias_new_string_value(char *string)
 
 	return value;
 }
-EXPORT_SYMBOL(irias_new_string_value);
 
 /*
  * Function irias_new_octseq_value (octets, len)
@@ -519,7 +517,6 @@ struct ias_value *irias_new_octseq_value(__u8 *octseq , int len)
 	memcpy(value->t.oct_seq, octseq , len);
 	return value;
 }
-EXPORT_SYMBOL(irias_new_octseq_value);
 
 struct ias_value *irias_new_missing_value(void)
 {
diff --git a/net/irda/irlap.c b/net/irda/irlap.c
index 7029618f5719..a16528657b4c 100644
--- a/net/irda/irlap.c
+++ b/net/irda/irlap.c
@@ -884,7 +884,8 @@ static void irlap_change_speed(struct irlap_cb *self, __u32 speed, int now)
 	if (now) {
 		/* Send down empty frame to trigger speed change */
 		skb = dev_alloc_skb(0);
-		irlap_queue_xmit(self, skb);
+		if (skb)
+			irlap_queue_xmit(self, skb);
 	}
 }
 
diff --git a/net/llc/llc_input.c b/net/llc/llc_input.c
index 8f3addf0724c..d62e0f9b9da3 100644
--- a/net/llc/llc_input.c
+++ b/net/llc/llc_input.c
@@ -118,7 +118,8 @@ static inline int llc_fixup_skb(struct sk_buff *skb)
 		u16 pdulen = eth_hdr(skb)->h_proto,
 		    data_size = ntohs(pdulen) - llc_len;
 
-		skb_trim(skb, data_size);
+		if (unlikely(pskb_trim_rcsum(skb, data_size)))
+			return 0;
 	}
 	return 1;
 }
diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c
index e581190fb6c3..f9b83f91371a 100644
--- a/net/netfilter/nf_conntrack_core.c
+++ b/net/netfilter/nf_conntrack_core.c
@@ -178,9 +178,6 @@ static struct {
 	/* allocated slab cache + modules which uses this slab cache */
 	int use;
 
-	/* Initialization */
-	int (*init_conntrack)(struct nf_conn *, u_int32_t);
-
 } nf_ct_cache[NF_CT_F_NUM];
 
 /* protect members of nf_ct_cache except of "use" */
@@ -208,10 +205,8 @@ nf_ct_proto_find_get(u_int16_t l3proto, u_int8_t protocol)
 
 	preempt_disable();
 	p = __nf_ct_proto_find(l3proto, protocol);
-	if (p) {
-		if (!try_module_get(p->me))
-			p = &nf_conntrack_generic_protocol;
-	}
+	if (!try_module_get(p->me))
+		p = &nf_conntrack_generic_protocol;
 	preempt_enable();
 	
 	return p;
@@ -229,10 +224,8 @@ nf_ct_l3proto_find_get(u_int16_t l3proto)
 
 	preempt_disable();
 	p = __nf_ct_l3proto_find(l3proto);
-	if (p) {
-		if (!try_module_get(p->me))
-			p = &nf_conntrack_generic_l3proto;
-	}
+	if (!try_module_get(p->me))
+		p = &nf_conntrack_generic_l3proto;
 	preempt_enable();
 
 	return p;
diff --git a/net/netfilter/nf_conntrack_l3proto_generic.c b/net/netfilter/nf_conntrack_l3proto_generic.c
index 7de4f06c63c5..3fc58e454d4e 100644
--- a/net/netfilter/nf_conntrack_l3proto_generic.c
+++ b/net/netfilter/nf_conntrack_l3proto_generic.c
@@ -94,5 +94,4 @@ struct nf_conntrack_l3proto nf_conntrack_generic_l3proto = {
 	.print_conntrack = generic_print_conntrack,
 	.prepare	 = generic_prepare,
 	.get_features	 = generic_get_features,
-	.me		 = THIS_MODULE,
 };
diff --git a/net/netfilter/nf_conntrack_proto_sctp.c b/net/netfilter/nf_conntrack_proto_sctp.c
index 9cccc325b687..0c6da496cfa9 100644
--- a/net/netfilter/nf_conntrack_proto_sctp.c
+++ b/net/netfilter/nf_conntrack_proto_sctp.c
@@ -240,12 +240,15 @@ static int do_basic_checks(struct nf_conn *conntrack,
 			flag = 1;
 		}
 
-		/* Cookie Ack/Echo chunks not the first OR 
-		   Init / Init Ack / Shutdown compl chunks not the only chunks */
-		if ((sch->type == SCTP_CID_COOKIE_ACK 
+		/*
+		 * Cookie Ack/Echo chunks not the first OR
+		 * Init / Init Ack / Shutdown compl chunks not the only chunks
+		 * OR zero-length.
+		 */
+		if (((sch->type == SCTP_CID_COOKIE_ACK
 			|| sch->type == SCTP_CID_COOKIE_ECHO
 			|| flag)
-		     && count !=0 ) {
+		      && count !=0) || !sch->length) {
 			DEBUGP("Basic checks failed\n");
 			return 1;
 		}
diff --git a/net/netfilter/nfnetlink_log.c b/net/netfilter/nfnetlink_log.c
index c60273cad778..61cdda4e5d3b 100644
--- a/net/netfilter/nfnetlink_log.c
+++ b/net/netfilter/nfnetlink_log.c
@@ -321,7 +321,7 @@ static int
 nfulnl_set_flags(struct nfulnl_instance *inst, u_int16_t flags)
 {
 	spin_lock_bh(&inst->lock);
-	inst->flags = ntohs(flags);
+	inst->flags = flags;
 	spin_unlock_bh(&inst->lock);
 
 	return 0;
@@ -902,7 +902,7 @@ nfulnl_recv_config(struct sock *ctnl, struct sk_buff *skb,
 	if (nfula[NFULA_CFG_FLAGS-1]) {
 		u_int16_t flags =
 			*(u_int16_t *)NFA_DATA(nfula[NFULA_CFG_FLAGS-1]);
-		nfulnl_set_flags(inst, ntohl(flags));
+		nfulnl_set_flags(inst, ntohs(flags));
 	}
 
 out_put:
diff --git a/net/netfilter/x_tables.c b/net/netfilter/x_tables.c
index 00cf0a4f4d92..99293c63ff73 100644
--- a/net/netfilter/x_tables.c
+++ b/net/netfilter/x_tables.c
@@ -289,7 +289,7 @@ int xt_compat_match(void *match, void **dstptr, int *size, int convert)
 		case COMPAT_TO_USER:
 			pm = (struct xt_entry_match *)match;
 			msize = pm->u.user.match_size;
-			if (__copy_to_user(*dstptr, pm, msize)) {
+			if (copy_to_user(*dstptr, pm, msize)) {
 				ret = -EFAULT;
 				break;
 			}
@@ -366,7 +366,7 @@ int xt_compat_target(void *target, void **dstptr, int *size, int convert)
 		case COMPAT_TO_USER:
 			pt = (struct xt_entry_target *)target;
 			tsize = pt->u.user.target_size;
-			if (__copy_to_user(*dstptr, pt, tsize)) {
+			if (copy_to_user(*dstptr, pt, tsize)) {
 				ret = -EFAULT;
 				break;
 			}
@@ -529,6 +529,7 @@ int xt_register_table(struct xt_table *table,
 
 	/* Simplifies replace_table code. */
 	table->private = bootstrap;
+	rwlock_init(&table->lock);
 	if (!xt_replace_table(table, 0, newinfo, &ret))
 		goto unlock;
 
@@ -538,7 +539,6 @@ int xt_register_table(struct xt_table *table,
 	/* save number of initial entries */
 	private->initial_entries = private->number;
 
-	rwlock_init(&table->lock);
 	list_prepend(&xt[table->af].tables, table);
 
 	ret = 0;
diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c
index 2a233ffcf618..3862e73d14d7 100644
--- a/net/netlink/af_netlink.c
+++ b/net/netlink/af_netlink.c
@@ -56,12 +56,12 @@
 #include <linux/mm.h>
 #include <linux/types.h>
 #include <linux/audit.h>
+#include <linux/selinux.h>
 
 #include <net/sock.h>
 #include <net/scm.h>
 #include <net/netlink.h>
 
-#define Nprintk(a...)
 #define NLGRPSZ(x)	(ALIGN(x, sizeof(unsigned long) * 8) / 8)
 
 struct netlink_sock {
@@ -1157,6 +1157,7 @@ static int netlink_sendmsg(struct kiocb *kiocb, struct socket *sock,
 	NETLINK_CB(skb).dst_pid = dst_pid;
 	NETLINK_CB(skb).dst_group = dst_group;
 	NETLINK_CB(skb).loginuid = audit_get_loginuid(current->audit_context);
+	selinux_get_task_sid(current, &(NETLINK_CB(skb).sid));
 	memcpy(NETLINK_CREDS(skb), &siocb->scm->creds, sizeof(struct ucred));
 
 	/* What can I do? Netlink is asynchronous, so that
diff --git a/net/netrom/af_netrom.c b/net/netrom/af_netrom.c
index d44981f5a619..3669cb953e6e 100644
--- a/net/netrom/af_netrom.c
+++ b/net/netrom/af_netrom.c
@@ -425,11 +425,16 @@ static int nr_create(struct socket *sock, int protocol)
 
 	nr_init_timers(sk);
 
-	nr->t1     = sysctl_netrom_transport_timeout;
-	nr->t2     = sysctl_netrom_transport_acknowledge_delay;
-	nr->n2     = sysctl_netrom_transport_maximum_tries;
-	nr->t4     = sysctl_netrom_transport_busy_delay;
-	nr->idle   = sysctl_netrom_transport_no_activity_timeout;
+	nr->t1     =
+		msecs_to_jiffies(sysctl_netrom_transport_timeout);
+	nr->t2     =
+		msecs_to_jiffies(sysctl_netrom_transport_acknowledge_delay);
+	nr->n2     =
+		msecs_to_jiffies(sysctl_netrom_transport_maximum_tries);
+	nr->t4     =
+		msecs_to_jiffies(sysctl_netrom_transport_busy_delay);
+	nr->idle   =
+		msecs_to_jiffies(sysctl_netrom_transport_no_activity_timeout);
 	nr->window = sysctl_netrom_transport_requested_window_size;
 
 	nr->bpqext = 1;
@@ -1365,8 +1370,6 @@ static struct notifier_block nr_dev_notifier = {
 
 static struct net_device **dev_nr;
 
-static char banner[] __initdata = KERN_INFO "G4KLX NET/ROM for Linux. Version 0.7 for AX25.037 Linux 2.4\n";
-
 static int __init nr_proto_init(void)
 {
 	int i;
@@ -1414,7 +1417,6 @@ static int __init nr_proto_init(void)
 	}
 		
 	register_netdevice_notifier(&nr_dev_notifier);
-	printk(banner);
 
 	ax25_protocol_register(AX25_P_NETROM, nr_route_frame);
 	ax25_linkfail_register(nr_link_failed);
diff --git a/net/netrom/nr_dev.c b/net/netrom/nr_dev.c
index 509afddae569..621e5586ab03 100644
--- a/net/netrom/nr_dev.c
+++ b/net/netrom/nr_dev.c
@@ -185,7 +185,6 @@ static struct net_device_stats *nr_get_stats(struct net_device *dev)
 
 void nr_setup(struct net_device *dev)
 {
-	SET_MODULE_OWNER(dev);
 	dev->mtu		= NR_MAX_PACKET_SIZE;
 	dev->hard_start_xmit	= nr_xmit;
 	dev->open		= nr_open;
diff --git a/net/rose/af_rose.c b/net/rose/af_rose.c
index ea65396d1619..55564efccf11 100644
--- a/net/rose/af_rose.c
+++ b/net/rose/af_rose.c
@@ -518,11 +518,11 @@ static int rose_create(struct socket *sock, int protocol)
 	init_timer(&rose->timer);
 	init_timer(&rose->idletimer);
 
-	rose->t1   = sysctl_rose_call_request_timeout;
-	rose->t2   = sysctl_rose_reset_request_timeout;
-	rose->t3   = sysctl_rose_clear_request_timeout;
-	rose->hb   = sysctl_rose_ack_hold_back_timeout;
-	rose->idle = sysctl_rose_no_activity_timeout;
+	rose->t1   = msecs_to_jiffies(sysctl_rose_call_request_timeout);
+	rose->t2   = msecs_to_jiffies(sysctl_rose_reset_request_timeout);
+	rose->t3   = msecs_to_jiffies(sysctl_rose_clear_request_timeout);
+	rose->hb   = msecs_to_jiffies(sysctl_rose_ack_hold_back_timeout);
+	rose->idle = msecs_to_jiffies(sysctl_rose_no_activity_timeout);
 
 	rose->state = ROSE_STATE_0;
 
@@ -1469,8 +1469,6 @@ static struct notifier_block rose_dev_notifier = {
 
 static struct net_device **dev_rose;
 
-static const char banner[] = KERN_INFO "F6FBB/G4KLX ROSE for Linux. Version 0.62 for AX25.037 Linux 2.4\n";
-
 static int __init rose_proto_init(void)
 {
 	int i;
@@ -1519,7 +1517,6 @@ static int __init rose_proto_init(void)
 
 	sock_register(&rose_family_ops);
 	register_netdevice_notifier(&rose_dev_notifier);
-	printk(banner);
 
 	ax25_protocol_register(AX25_P_ROSE, rose_route_frame);
 	ax25_linkfail_register(rose_link_failed);
diff --git a/net/rose/rose_dev.c b/net/rose/rose_dev.c
index d297af737d10..2a1bf8e119e5 100644
--- a/net/rose/rose_dev.c
+++ b/net/rose/rose_dev.c
@@ -135,7 +135,6 @@ static struct net_device_stats *rose_get_stats(struct net_device *dev)
 
 void rose_setup(struct net_device *dev)
 {
-	SET_MODULE_OWNER(dev);
 	dev->mtu		= ROSE_MAX_PACKET_SIZE - 2;
 	dev->hard_start_xmit	= rose_xmit;
 	dev->open		= rose_open;
diff --git a/net/rose/rose_link.c b/net/rose/rose_link.c
index 09e9e9d04d92..bd86a63960ce 100644
--- a/net/rose/rose_link.c
+++ b/net/rose/rose_link.c
@@ -40,7 +40,8 @@ void rose_start_ftimer(struct rose_neigh *neigh)
 
 	neigh->ftimer.data     = (unsigned long)neigh;
 	neigh->ftimer.function = &rose_ftimer_expiry;
-	neigh->ftimer.expires  = jiffies + sysctl_rose_link_fail_timeout;
+	neigh->ftimer.expires  =
+		jiffies + msecs_to_jiffies(sysctl_rose_link_fail_timeout);
 
 	add_timer(&neigh->ftimer);
 }
@@ -51,7 +52,8 @@ static void rose_start_t0timer(struct rose_neigh *neigh)
 
 	neigh->t0timer.data     = (unsigned long)neigh;
 	neigh->t0timer.function = &rose_t0timer_expiry;
-	neigh->t0timer.expires  = jiffies + sysctl_rose_restart_request_timeout;
+	neigh->t0timer.expires  =
+		jiffies + msecs_to_jiffies(sysctl_rose_restart_request_timeout);
 
 	add_timer(&neigh->t0timer);
 }
diff --git a/net/rose/rose_route.c b/net/rose/rose_route.c
index 8631b65a7312..a22542fa1bc8 100644
--- a/net/rose/rose_route.c
+++ b/net/rose/rose_route.c
@@ -48,8 +48,6 @@ static DEFINE_SPINLOCK(rose_route_list_lock);
 
 struct rose_neigh *rose_loopback_neigh;
 
-static void rose_remove_neigh(struct rose_neigh *);
-
 /*
  *	Add a new route to a node, and in the process add the node and the
  *	neighbour if it is new.
@@ -235,11 +233,8 @@ static void rose_remove_neigh(struct rose_neigh *rose_neigh)
 
 	skb_queue_purge(&rose_neigh->queue);
 
-	spin_lock_bh(&rose_neigh_list_lock);
-
 	if ((s = rose_neigh_list) == rose_neigh) {
 		rose_neigh_list = rose_neigh->next;
-		spin_unlock_bh(&rose_neigh_list_lock);
 		kfree(rose_neigh->digipeat);
 		kfree(rose_neigh);
 		return;
@@ -248,7 +243,6 @@ static void rose_remove_neigh(struct rose_neigh *rose_neigh)
 	while (s != NULL && s->next != NULL) {
 		if (s->next == rose_neigh) {
 			s->next = rose_neigh->next;
-			spin_unlock_bh(&rose_neigh_list_lock);
 			kfree(rose_neigh->digipeat);
 			kfree(rose_neigh);
 			return;
@@ -256,7 +250,6 @@ static void rose_remove_neigh(struct rose_neigh *rose_neigh)
 
 		s = s->next;
 	}
-	spin_unlock_bh(&rose_neigh_list_lock);
 }
 
 /*
diff --git a/net/sched/act_ipt.c b/net/sched/act_ipt.c
index 6056d20ef429..37640c6fc014 100644
--- a/net/sched/act_ipt.c
+++ b/net/sched/act_ipt.c
@@ -69,6 +69,11 @@ ipt_init_target(struct ipt_entry_target *t, char *table, unsigned int hook)
 	DPRINTK("ipt_init_target: found %s\n", target->name);
 	t->u.kernel.target = target;
 
+	ret = xt_check_target(target, AF_INET, t->u.target_size - sizeof(*t),
+			      table, hook, 0, 0);
+	if (ret)
+		return ret;
+
 	if (t->u.kernel.target->checkentry
 	    && !t->u.kernel.target->checkentry(table, NULL,
 		    			       t->u.kernel.target, t->data,
diff --git a/net/sched/sch_generic.c b/net/sched/sch_generic.c
index 31eb83717c26..138ea92ed268 100644
--- a/net/sched/sch_generic.c
+++ b/net/sched/sch_generic.c
@@ -193,8 +193,10 @@ static void dev_watchdog(unsigned long arg)
 		    netif_running(dev) &&
 		    netif_carrier_ok(dev)) {
 			if (netif_queue_stopped(dev) &&
-			    (jiffies - dev->trans_start) > dev->watchdog_timeo) {
-				printk(KERN_INFO "NETDEV WATCHDOG: %s: transmit timed out\n", dev->name);
+			    time_after(jiffies, dev->trans_start + dev->watchdog_timeo)) {
+
+				printk(KERN_INFO "NETDEV WATCHDOG: %s: transmit timed out\n",
+				       dev->name);
 				dev->tx_timeout(dev);
 			}
 			if (!mod_timer(&dev->watchdog_timer, jiffies + dev->watchdog_timeo))
diff --git a/net/sched/sch_hfsc.c b/net/sched/sch_hfsc.c
index 91132f6871d7..f1c7bd29f2cd 100644
--- a/net/sched/sch_hfsc.c
+++ b/net/sched/sch_hfsc.c
@@ -974,10 +974,10 @@ hfsc_adjust_levels(struct hfsc_class *cl)
 	do {
 		level = 0;
 		list_for_each_entry(p, &cl->children, siblings) {
-			if (p->level > level)
-				level = p->level;
+			if (p->level >= level)
+				level = p->level + 1;
 		}
-		cl->level = level + 1;
+		cl->level = level;
 	} while ((cl = cl->cl_parent) != NULL);
 }
 
diff --git a/net/sched/sch_netem.c b/net/sched/sch_netem.c
index 7228d30512c7..5a4a4d0ae502 100644
--- a/net/sched/sch_netem.c
+++ b/net/sched/sch_netem.c
@@ -167,7 +167,7 @@ static int netem_enqueue(struct sk_buff *skb, struct Qdisc *sch)
 	if (count == 0) {
 		sch->qstats.drops++;
 		kfree_skb(skb);
-		return NET_XMIT_DROP;
+		return NET_XMIT_BYPASS;
 	}
 
 	/*
diff --git a/net/sctp/input.c b/net/sctp/input.c
index d117ebc75cf8..1662f9cc869e 100644
--- a/net/sctp/input.c
+++ b/net/sctp/input.c
@@ -73,6 +73,8 @@ static struct sctp_association *__sctp_lookup_association(
 					const union sctp_addr *peer,
 					struct sctp_transport **pt);
 
+static void sctp_add_backlog(struct sock *sk, struct sk_buff *skb);
+
 
 /* Calculate the SCTP checksum of an SCTP packet.  */
 static inline int sctp_rcv_checksum(struct sk_buff *skb)
@@ -186,7 +188,6 @@ int sctp_rcv(struct sk_buff *skb)
 	 */
 	if (sk->sk_bound_dev_if && (sk->sk_bound_dev_if != af->skb_iif(skb)))
 	{
-		sock_put(sk);
 		if (asoc) {
 			sctp_association_put(asoc);
 			asoc = NULL;
@@ -197,7 +198,6 @@ int sctp_rcv(struct sk_buff *skb)
 		sk = sctp_get_ctl_sock();
 		ep = sctp_sk(sk)->ep;
 		sctp_endpoint_hold(ep);
-		sock_hold(sk);
 		rcvr = &ep->base;
 	}
 
@@ -253,25 +253,18 @@ int sctp_rcv(struct sk_buff *skb)
 	 */
 	sctp_bh_lock_sock(sk);
 
-	/* It is possible that the association could have moved to a different
-	 * socket if it is peeled off. If so, update the sk.
-	 */ 
-	if (sk != rcvr->sk) {
-		sctp_bh_lock_sock(rcvr->sk);
-		sctp_bh_unlock_sock(sk);
-		sk = rcvr->sk;
-	}
-
 	if (sock_owned_by_user(sk))
-		sk_add_backlog(sk, skb);
+		sctp_add_backlog(sk, skb);
 	else
-		sctp_backlog_rcv(sk, skb);
+		sctp_inq_push(&chunk->rcvr->inqueue, chunk);
 
-	/* Release the sock and the sock ref we took in the lookup calls.
-	 * The asoc/ep ref will be released in sctp_backlog_rcv.
-	 */
 	sctp_bh_unlock_sock(sk);
-	sock_put(sk);
+
+	/* Release the asoc/ep ref we took in the lookup calls. */
+	if (asoc)
+		sctp_association_put(asoc);
+	else
+		sctp_endpoint_put(ep);
 
 	return 0;
 
@@ -280,8 +273,7 @@ discard_it:
 	return 0;
 
 discard_release:
-	/* Release any structures we may be holding. */
-	sock_put(sk);
+	/* Release the asoc/ep ref we took in the lookup calls. */
 	if (asoc)
 		sctp_association_put(asoc);
 	else
@@ -290,56 +282,87 @@ discard_release:
 	goto discard_it;
 }
 
-/* Handle second half of inbound skb processing.  If the sock was busy,
- * we may have need to delay processing until later when the sock is
- * released (on the backlog).   If not busy, we call this routine
- * directly from the bottom half.
+/* Process the backlog queue of the socket.  Every skb on
+ * the backlog holds a ref on an association or endpoint.
+ * We hold this ref throughout the state machine to make
+ * sure that the structure we need is still around.
  */
 int sctp_backlog_rcv(struct sock *sk, struct sk_buff *skb)
 {
 	struct sctp_chunk *chunk = SCTP_INPUT_CB(skb)->chunk;
- 	struct sctp_inq *inqueue = NULL;
+ 	struct sctp_inq *inqueue = &chunk->rcvr->inqueue;
  	struct sctp_ep_common *rcvr = NULL;
+	int backloged = 0;
 
  	rcvr = chunk->rcvr;
 
-	BUG_TRAP(rcvr->sk == sk);
-
- 	if (rcvr->dead) {
- 		sctp_chunk_free(chunk);
- 	} else {
- 		inqueue = &chunk->rcvr->inqueue;
- 		sctp_inq_push(inqueue, chunk);
- 	}
-
-	/* Release the asoc/ep ref we took in the lookup calls in sctp_rcv. */ 
- 	if (SCTP_EP_TYPE_ASSOCIATION == rcvr->type)
- 		sctp_association_put(sctp_assoc(rcvr));
- 	else
- 		sctp_endpoint_put(sctp_ep(rcvr));
-  
+	/* If the rcvr is dead then the association or endpoint
+	 * has been deleted and we can safely drop the chunk
+	 * and refs that we are holding.
+	 */
+	if (rcvr->dead) {
+		sctp_chunk_free(chunk);
+		goto done;
+	}
+
+	if (unlikely(rcvr->sk != sk)) {
+		/* In this case, the association moved from one socket to
+		 * another.  We are currently sitting on the backlog of the
+		 * old socket, so we need to move.
+		 * However, since we are here in the process context we
+		 * need to take make sure that the user doesn't own
+		 * the new socket when we process the packet.
+		 * If the new socket is user-owned, queue the chunk to the
+		 * backlog of the new socket without dropping any refs.
+		 * Otherwise, we can safely push the chunk on the inqueue.
+		 */
+
+		sk = rcvr->sk;
+		sctp_bh_lock_sock(sk);
+
+		if (sock_owned_by_user(sk)) {
+			sk_add_backlog(sk, skb);
+			backloged = 1;
+		} else
+			sctp_inq_push(inqueue, chunk);
+
+		sctp_bh_unlock_sock(sk);
+
+		/* If the chunk was backloged again, don't drop refs */
+		if (backloged)
+			return 0;
+	} else {
+		sctp_inq_push(inqueue, chunk);
+	}
+
+done:
+	/* Release the refs we took in sctp_add_backlog */
+	if (SCTP_EP_TYPE_ASSOCIATION == rcvr->type)
+		sctp_association_put(sctp_assoc(rcvr));
+	else if (SCTP_EP_TYPE_SOCKET == rcvr->type)
+		sctp_endpoint_put(sctp_ep(rcvr));
+	else
+		BUG();
+
         return 0;
 }
 
-void sctp_backlog_migrate(struct sctp_association *assoc, 
-			  struct sock *oldsk, struct sock *newsk)
+static void sctp_add_backlog(struct sock *sk, struct sk_buff *skb)
 {
-	struct sk_buff *skb;
-	struct sctp_chunk *chunk;
+	struct sctp_chunk *chunk = SCTP_INPUT_CB(skb)->chunk;
+	struct sctp_ep_common *rcvr = chunk->rcvr;
 
-	skb = oldsk->sk_backlog.head;
-	oldsk->sk_backlog.head = oldsk->sk_backlog.tail = NULL;
-	while (skb != NULL) {
-		struct sk_buff *next = skb->next;
-
-		chunk = SCTP_INPUT_CB(skb)->chunk;
-		skb->next = NULL;
-		if (&assoc->base == chunk->rcvr)
-			sk_add_backlog(newsk, skb);
-		else
-			sk_add_backlog(oldsk, skb);
-		skb = next;
-	}
+	/* Hold the assoc/ep while hanging on the backlog queue.
+	 * This way, we know structures we need will not disappear from us
+	 */
+	if (SCTP_EP_TYPE_ASSOCIATION == rcvr->type)
+		sctp_association_hold(sctp_assoc(rcvr));
+	else if (SCTP_EP_TYPE_SOCKET == rcvr->type)
+		sctp_endpoint_hold(sctp_ep(rcvr));
+	else
+		BUG();
+
+	sk_add_backlog(sk, skb);
 }
 
 /* Handle icmp frag needed error. */
@@ -412,7 +435,7 @@ struct sock *sctp_err_lookup(int family, struct sk_buff *skb,
 	union sctp_addr daddr;
 	struct sctp_af *af;
 	struct sock *sk = NULL;
-	struct sctp_association *asoc = NULL;
+	struct sctp_association *asoc;
 	struct sctp_transport *transport = NULL;
 
 	*app = NULL; *tpp = NULL;
@@ -453,7 +476,6 @@ struct sock *sctp_err_lookup(int family, struct sk_buff *skb,
 	return sk;
 
 out:
-	sock_put(sk);
 	if (asoc)
 		sctp_association_put(asoc);
 	return NULL;
@@ -463,7 +485,6 @@ out:
 void sctp_err_finish(struct sock *sk, struct sctp_association *asoc)
 {
 	sctp_bh_unlock_sock(sk);
-	sock_put(sk);
 	if (asoc)
 		sctp_association_put(asoc);
 }
@@ -490,7 +511,7 @@ void sctp_v4_err(struct sk_buff *skb, __u32 info)
 	int type = skb->h.icmph->type;
 	int code = skb->h.icmph->code;
 	struct sock *sk;
-	struct sctp_association *asoc;
+	struct sctp_association *asoc = NULL;
 	struct sctp_transport *transport;
 	struct inet_sock *inet;
 	char *saveip, *savesctp;
@@ -716,7 +737,6 @@ static struct sctp_endpoint *__sctp_rcv_lookup_endpoint(const union sctp_addr *l
 
 hit:
 	sctp_endpoint_hold(ep);
-	sock_hold(epb->sk);
 	read_unlock(&head->lock);
 	return ep;
 }
@@ -818,7 +838,6 @@ static struct sctp_association *__sctp_lookup_association(
 hit:
 	*pt = transport;
 	sctp_association_hold(asoc);
-	sock_hold(epb->sk);
 	read_unlock(&head->lock);
 	return asoc;
 }
@@ -846,7 +865,6 @@ int sctp_has_association(const union sctp_addr *laddr,
 	struct sctp_transport *transport;
 
 	if ((asoc = sctp_lookup_association(laddr, paddr, &transport))) {
-		sock_put(asoc->base.sk);
 		sctp_association_put(asoc);
 		return 1;
 	}
diff --git a/net/sctp/inqueue.c b/net/sctp/inqueue.c
index 297b8951463e..cf0c767d43ae 100644
--- a/net/sctp/inqueue.c
+++ b/net/sctp/inqueue.c
@@ -149,6 +149,7 @@ struct sctp_chunk *sctp_inq_pop(struct sctp_inq *queue)
 		/* This is the first chunk in the packet.  */
 		chunk->singleton = 1;
 		ch = (sctp_chunkhdr_t *) chunk->skb->data;
+		chunk->data_accepted = 0;
 	}
 
         chunk->chunk_hdr = ch;
diff --git a/net/sctp/sm_sideeffect.c b/net/sctp/sm_sideeffect.c
index 8d1dc24bab4c..c5beb2ad7ef7 100644
--- a/net/sctp/sm_sideeffect.c
+++ b/net/sctp/sm_sideeffect.c
@@ -498,10 +498,6 @@ static void sctp_cmd_assoc_failed(sctp_cmd_seq_t *commands,
 	sctp_add_cmd_sf(commands, SCTP_CMD_NEW_STATE,
 			SCTP_STATE(SCTP_STATE_CLOSED));
 
-	/* Set sk_err to ECONNRESET on a 1-1 style socket. */
-	if (!sctp_style(asoc->base.sk, UDP))
-		asoc->base.sk->sk_err = ECONNRESET; 
-
 	/* SEND_FAILED sent later when cleaning up the association. */
 	asoc->outqueue.error = error;
 	sctp_add_cmd_sf(commands, SCTP_CMD_DELETE_TCB, SCTP_NULL());
@@ -838,6 +834,15 @@ static void sctp_cmd_del_non_primary(struct sctp_association *asoc)
 	return;
 }
 
+/* Helper function to set sk_err on a 1-1 style socket. */
+static void sctp_cmd_set_sk_err(struct sctp_association *asoc, int error)
+{
+	struct sock *sk = asoc->base.sk;
+
+	if (!sctp_style(sk, UDP))
+		sk->sk_err = error;
+}
+
 /* These three macros allow us to pull the debugging code out of the
  * main flow of sctp_do_sm() to keep attention focused on the real
  * functionality there.
@@ -1458,6 +1463,9 @@ static int sctp_cmd_interpreter(sctp_event_t event_type,
 			local_cork = 0;
 			asoc->peer.retran_path = t;
 			break;
+		case SCTP_CMD_SET_SK_ERR:
+			sctp_cmd_set_sk_err(asoc, cmd->obj.error);
+			break;
 		default:
 			printk(KERN_WARNING "Impossible command: %u, %p\n",
 			       cmd->verb, cmd->obj.ptr);
diff --git a/net/sctp/sm_statefuns.c b/net/sctp/sm_statefuns.c
index 2b9a832b29a7..8bc279219a72 100644
--- a/net/sctp/sm_statefuns.c
+++ b/net/sctp/sm_statefuns.c
@@ -93,7 +93,7 @@ static sctp_disposition_t sctp_sf_shut_8_4_5(const struct sctp_endpoint *ep,
 static struct sctp_sackhdr *sctp_sm_pull_sack(struct sctp_chunk *chunk);
 
 static sctp_disposition_t sctp_stop_t1_and_abort(sctp_cmd_seq_t *commands,
-					   __u16 error,
+					   __u16 error, int sk_err,
 					   const struct sctp_association *asoc,
 					   struct sctp_transport *transport);
 
@@ -448,7 +448,7 @@ sctp_disposition_t sctp_sf_do_5_1C_ack(const struct sctp_endpoint *ep,
 	__u32 init_tag;
 	struct sctp_chunk *err_chunk;
 	struct sctp_packet *packet;
-	sctp_disposition_t ret;
+	__u16 error;
 
 	if (!sctp_vtag_verify(chunk, asoc))
 		return sctp_sf_pdiscard(ep, asoc, type, arg, commands);
@@ -480,11 +480,9 @@ sctp_disposition_t sctp_sf_do_5_1C_ack(const struct sctp_endpoint *ep,
 			goto nomem;
 
 		sctp_add_cmd_sf(commands, SCTP_CMD_REPLY, SCTP_CHUNK(reply));
-		sctp_add_cmd_sf(commands, SCTP_CMD_NEW_STATE,
-				SCTP_STATE(SCTP_STATE_CLOSED));
-		SCTP_INC_STATS(SCTP_MIB_ABORTEDS);
-		sctp_add_cmd_sf(commands, SCTP_CMD_DELETE_TCB, SCTP_NULL());
-		return SCTP_DISPOSITION_DELETE_TCB;
+		return sctp_stop_t1_and_abort(commands, SCTP_ERROR_INV_PARAM,
+					      ECONNREFUSED, asoc,
+					      chunk->transport);
 	}
 
 	/* Verify the INIT chunk before processing it. */
@@ -511,27 +509,16 @@ sctp_disposition_t sctp_sf_do_5_1C_ack(const struct sctp_endpoint *ep,
 				sctp_add_cmd_sf(commands, SCTP_CMD_SEND_PKT,
 						SCTP_PACKET(packet));
 				SCTP_INC_STATS(SCTP_MIB_OUTCTRLCHUNKS);
-				sctp_add_cmd_sf(commands, SCTP_CMD_NEW_STATE,
-						SCTP_STATE(SCTP_STATE_CLOSED));
-				sctp_add_cmd_sf(commands, SCTP_CMD_DELETE_TCB,
-						SCTP_NULL());
-				return SCTP_DISPOSITION_CONSUME;
+				error = SCTP_ERROR_INV_PARAM;
 			} else {
-				sctp_add_cmd_sf(commands, SCTP_CMD_NEW_STATE,
-						SCTP_STATE(SCTP_STATE_CLOSED));
-				sctp_add_cmd_sf(commands, SCTP_CMD_DELETE_TCB,
-						SCTP_NULL());
-				return SCTP_DISPOSITION_NOMEM;
+				error = SCTP_ERROR_NO_RESOURCE;
 			}
 		} else {
-			ret = sctp_sf_tabort_8_4_8(ep, asoc, type, arg,
-						   commands);
-			sctp_add_cmd_sf(commands, SCTP_CMD_NEW_STATE,
-					SCTP_STATE(SCTP_STATE_CLOSED));
-			sctp_add_cmd_sf(commands, SCTP_CMD_DELETE_TCB,
-					SCTP_NULL());
-			return ret;
+			sctp_sf_tabort_8_4_8(ep, asoc, type, arg, commands);
+			error = SCTP_ERROR_INV_PARAM;
 		}
+		return sctp_stop_t1_and_abort(commands, error, ECONNREFUSED,
+						asoc, chunk->transport);
 	}
 
 	/* Tag the variable length parameters.  Note that we never
@@ -636,8 +623,9 @@ sctp_disposition_t sctp_sf_do_5_1D_ce(const struct sctp_endpoint *ep,
 	 */
         chunk->subh.cookie_hdr =
 		(struct sctp_signed_cookie *)chunk->skb->data;
-	skb_pull(chunk->skb,
-		 ntohs(chunk->chunk_hdr->length) - sizeof(sctp_chunkhdr_t));
+	if (!pskb_pull(chunk->skb, ntohs(chunk->chunk_hdr->length) -
+					 sizeof(sctp_chunkhdr_t)))
+		goto nomem;
 
 	/* 5.1 D) Upon reception of the COOKIE ECHO chunk, Endpoint
 	 * "Z" will reply with a COOKIE ACK chunk after building a TCB
@@ -885,6 +873,8 @@ sctp_disposition_t sctp_sf_sendbeat_8_3(const struct sctp_endpoint *ep,
 	struct sctp_transport *transport = (struct sctp_transport *) arg;
 
 	if (asoc->overall_error_count >= asoc->max_retrans) {
+		sctp_add_cmd_sf(commands, SCTP_CMD_SET_SK_ERR,
+				SCTP_ERROR(ETIMEDOUT));
 		/* CMD_ASSOC_FAILED calls CMD_DELETE_TCB. */
 		sctp_add_cmd_sf(commands, SCTP_CMD_ASSOC_FAILED,
 				SCTP_U32(SCTP_ERROR_NO_ERROR));
@@ -965,7 +955,8 @@ sctp_disposition_t sctp_sf_beat_8_3(const struct sctp_endpoint *ep,
 	 */
 	chunk->subh.hb_hdr = (sctp_heartbeathdr_t *) chunk->skb->data;
 	paylen = ntohs(chunk->chunk_hdr->length) - sizeof(sctp_chunkhdr_t);
-	skb_pull(chunk->skb, paylen);
+	if (!pskb_pull(chunk->skb, paylen))
+		goto nomem;
 
 	reply = sctp_make_heartbeat_ack(asoc, chunk,
 					chunk->subh.hb_hdr, paylen);
@@ -1028,6 +1019,12 @@ sctp_disposition_t sctp_sf_backbeat_8_3(const struct sctp_endpoint *ep,
 						  commands);
 
 	hbinfo = (sctp_sender_hb_info_t *) chunk->skb->data;
+	/* Make sure that the length of the parameter is what we expect */
+	if (ntohs(hbinfo->param_hdr.length) !=
+				    sizeof(sctp_sender_hb_info_t)) {
+		return SCTP_DISPOSITION_DISCARD;
+	}
+
 	from_addr = hbinfo->daddr;
 	link = sctp_assoc_lookup_paddr(asoc, &from_addr);
 
@@ -1860,8 +1857,9 @@ sctp_disposition_t sctp_sf_do_5_2_4_dupcook(const struct sctp_endpoint *ep,
 	 * are in good shape.
 	 */
         chunk->subh.cookie_hdr = (struct sctp_signed_cookie *)chunk->skb->data;
-	skb_pull(chunk->skb, ntohs(chunk->chunk_hdr->length) -
-		 sizeof(sctp_chunkhdr_t));
+	if (!pskb_pull(chunk->skb, ntohs(chunk->chunk_hdr->length) -
+					sizeof(sctp_chunkhdr_t)))
+		goto nomem;
 
 	/* In RFC 2960 5.2.4 3, if both Verification Tags in the State Cookie
 	 * of a duplicate COOKIE ECHO match the Verification Tags of the
@@ -2123,6 +2121,8 @@ static sctp_disposition_t sctp_sf_do_5_2_6_stale(const struct sctp_endpoint *ep,
 	int attempts = asoc->init_err_counter + 1;
 
 	if (attempts > asoc->max_init_attempts) {
+		sctp_add_cmd_sf(commands, SCTP_CMD_SET_SK_ERR,
+				SCTP_ERROR(ETIMEDOUT));
 		sctp_add_cmd_sf(commands, SCTP_CMD_INIT_FAILED,
 				SCTP_U32(SCTP_ERROR_STALE_COOKIE));
 		return SCTP_DISPOSITION_DELETE_TCB;
@@ -2259,6 +2259,7 @@ sctp_disposition_t sctp_sf_do_9_1_abort(const struct sctp_endpoint *ep,
 	if (len >= sizeof(struct sctp_chunkhdr) + sizeof(struct sctp_errhdr))
 		error = ((sctp_errhdr_t *)chunk->skb->data)->cause;
 
+	sctp_add_cmd_sf(commands, SCTP_CMD_SET_SK_ERR, SCTP_ERROR(ECONNRESET));
  	/* ASSOC_FAILED will DELETE_TCB. */
 	sctp_add_cmd_sf(commands, SCTP_CMD_ASSOC_FAILED, SCTP_U32(error));
 	SCTP_INC_STATS(SCTP_MIB_ABORTEDS);
@@ -2303,7 +2304,8 @@ sctp_disposition_t sctp_sf_cookie_wait_abort(const struct sctp_endpoint *ep,
 	if (len >= sizeof(struct sctp_chunkhdr) + sizeof(struct sctp_errhdr))
 		error = ((sctp_errhdr_t *)chunk->skb->data)->cause;
 
-	return sctp_stop_t1_and_abort(commands, error, asoc, chunk->transport);
+	return sctp_stop_t1_and_abort(commands, error, ECONNREFUSED, asoc,
+				      chunk->transport);
 }
 
 /*
@@ -2315,7 +2317,8 @@ sctp_disposition_t sctp_sf_cookie_wait_icmp_abort(const struct sctp_endpoint *ep
 					void *arg,
 					sctp_cmd_seq_t *commands)
 {
-	return sctp_stop_t1_and_abort(commands, SCTP_ERROR_NO_ERROR, asoc,
+	return sctp_stop_t1_and_abort(commands, SCTP_ERROR_NO_ERROR,
+				      ENOPROTOOPT, asoc,
 				      (struct sctp_transport *)arg);
 }
 
@@ -2340,7 +2343,7 @@ sctp_disposition_t sctp_sf_cookie_echoed_abort(const struct sctp_endpoint *ep,
  * This is common code called by several sctp_sf_*_abort() functions above.
  */
 static sctp_disposition_t sctp_stop_t1_and_abort(sctp_cmd_seq_t *commands,
-					   __u16 error,
+					   __u16 error, int sk_err,
 					   const struct sctp_association *asoc,
 					   struct sctp_transport *transport)
 {
@@ -2350,6 +2353,7 @@ static sctp_disposition_t sctp_stop_t1_and_abort(sctp_cmd_seq_t *commands,
 	SCTP_INC_STATS(SCTP_MIB_ABORTEDS);
 	sctp_add_cmd_sf(commands, SCTP_CMD_TIMER_STOP,
 			SCTP_TO(SCTP_EVENT_TIMEOUT_T1_INIT));
+	sctp_add_cmd_sf(commands, SCTP_CMD_SET_SK_ERR, SCTP_ERROR(sk_err));
 	/* CMD_INIT_FAILED will DELETE_TCB. */
 	sctp_add_cmd_sf(commands, SCTP_CMD_INIT_FAILED,
 			SCTP_U32(error));
@@ -3333,6 +3337,8 @@ sctp_disposition_t sctp_sf_do_asconf_ack(const struct sctp_endpoint *ep,
 		sctp_add_cmd_sf(commands, SCTP_CMD_TIMER_STOP,
 				SCTP_TO(SCTP_EVENT_TIMEOUT_T4_RTO));
 		sctp_add_cmd_sf(commands, SCTP_CMD_DISCARD_PACKET,SCTP_NULL());
+		sctp_add_cmd_sf(commands, SCTP_CMD_SET_SK_ERR,
+			        SCTP_ERROR(ECONNABORTED));
 		sctp_add_cmd_sf(commands, SCTP_CMD_ASSOC_FAILED,
 				SCTP_U32(SCTP_ERROR_ASCONF_ACK));
 		SCTP_INC_STATS(SCTP_MIB_ABORTEDS);
@@ -3359,6 +3365,8 @@ sctp_disposition_t sctp_sf_do_asconf_ack(const struct sctp_endpoint *ep,
 		 * processing the rest of the chunks in the packet.
 		 */
 		sctp_add_cmd_sf(commands, SCTP_CMD_DISCARD_PACKET,SCTP_NULL());
+		sctp_add_cmd_sf(commands, SCTP_CMD_SET_SK_ERR,
+			        SCTP_ERROR(ECONNABORTED));
 		sctp_add_cmd_sf(commands, SCTP_CMD_ASSOC_FAILED,
 				SCTP_U32(SCTP_ERROR_ASCONF_ACK));
 		SCTP_INC_STATS(SCTP_MIB_ABORTEDS);
@@ -3711,9 +3719,13 @@ static sctp_disposition_t sctp_sf_violation_chunklen(
 	if (asoc->state <= SCTP_STATE_COOKIE_ECHOED) {
 		sctp_add_cmd_sf(commands, SCTP_CMD_TIMER_STOP,
 				SCTP_TO(SCTP_EVENT_TIMEOUT_T1_INIT));
+		sctp_add_cmd_sf(commands, SCTP_CMD_SET_SK_ERR,
+				SCTP_ERROR(ECONNREFUSED));
 		sctp_add_cmd_sf(commands, SCTP_CMD_INIT_FAILED,
 				SCTP_U32(SCTP_ERROR_PROTO_VIOLATION));
 	} else {
+		sctp_add_cmd_sf(commands, SCTP_CMD_SET_SK_ERR,
+			        SCTP_ERROR(ECONNABORTED));
 		sctp_add_cmd_sf(commands, SCTP_CMD_ASSOC_FAILED,
 				SCTP_U32(SCTP_ERROR_PROTO_VIOLATION));
 		SCTP_DEC_STATS(SCTP_MIB_CURRESTAB);
@@ -4031,6 +4043,8 @@ sctp_disposition_t sctp_sf_do_9_1_prm_abort(
 	 * TCB.  This is a departure from our typical NOMEM handling.
 	 */
 
+	sctp_add_cmd_sf(commands, SCTP_CMD_SET_SK_ERR,
+			SCTP_ERROR(ECONNABORTED));
 	/* Delete the established association. */
 	sctp_add_cmd_sf(commands, SCTP_CMD_ASSOC_FAILED,
 			SCTP_U32(SCTP_ERROR_USER_ABORT));
@@ -4172,6 +4186,8 @@ sctp_disposition_t sctp_sf_cookie_wait_prm_abort(
 	 * TCB.  This is a departure from our typical NOMEM handling.
 	 */
 
+	sctp_add_cmd_sf(commands, SCTP_CMD_SET_SK_ERR,
+			SCTP_ERROR(ECONNREFUSED));
 	/* Delete the established association. */
 	sctp_add_cmd_sf(commands, SCTP_CMD_INIT_FAILED,
 			SCTP_U32(SCTP_ERROR_USER_ABORT));
@@ -4540,6 +4556,8 @@ sctp_disposition_t sctp_sf_do_6_3_3_rtx(const struct sctp_endpoint *ep,
 	struct sctp_transport *transport = arg;
 
 	if (asoc->overall_error_count >= asoc->max_retrans) {
+		sctp_add_cmd_sf(commands, SCTP_CMD_SET_SK_ERR,
+				SCTP_ERROR(ETIMEDOUT));
 		/* CMD_ASSOC_FAILED calls CMD_DELETE_TCB. */
 		sctp_add_cmd_sf(commands, SCTP_CMD_ASSOC_FAILED,
 				SCTP_U32(SCTP_ERROR_NO_ERROR));
@@ -4659,6 +4677,8 @@ sctp_disposition_t sctp_sf_t1_init_timer_expire(const struct sctp_endpoint *ep,
 		SCTP_DEBUG_PRINTK("Giving up on INIT, attempts: %d"
 				  " max_init_attempts: %d\n",
 				  attempts, asoc->max_init_attempts);
+		sctp_add_cmd_sf(commands, SCTP_CMD_SET_SK_ERR,
+				SCTP_ERROR(ETIMEDOUT));
 		sctp_add_cmd_sf(commands, SCTP_CMD_INIT_FAILED,
 				SCTP_U32(SCTP_ERROR_NO_ERROR));
 		return SCTP_DISPOSITION_DELETE_TCB;
@@ -4708,6 +4728,8 @@ sctp_disposition_t sctp_sf_t1_cookie_timer_expire(const struct sctp_endpoint *ep
 
 		sctp_add_cmd_sf(commands, SCTP_CMD_REPLY, SCTP_CHUNK(repl));
 	} else {
+		sctp_add_cmd_sf(commands, SCTP_CMD_SET_SK_ERR,
+				SCTP_ERROR(ETIMEDOUT));
 		sctp_add_cmd_sf(commands, SCTP_CMD_INIT_FAILED,
 				SCTP_U32(SCTP_ERROR_NO_ERROR));
 		return SCTP_DISPOSITION_DELETE_TCB;
@@ -4739,6 +4761,8 @@ sctp_disposition_t sctp_sf_t2_timer_expire(const struct sctp_endpoint *ep,
 
 	SCTP_DEBUG_PRINTK("Timer T2 expired.\n");
 	if (asoc->overall_error_count >= asoc->max_retrans) {
+		sctp_add_cmd_sf(commands, SCTP_CMD_SET_SK_ERR,
+				SCTP_ERROR(ETIMEDOUT));
 		/* Note:  CMD_ASSOC_FAILED calls CMD_DELETE_TCB. */
 		sctp_add_cmd_sf(commands, SCTP_CMD_ASSOC_FAILED,
 				SCTP_U32(SCTP_ERROR_NO_ERROR));
@@ -4814,6 +4838,8 @@ sctp_disposition_t sctp_sf_t4_timer_expire(
 	if (asoc->overall_error_count >= asoc->max_retrans) {
 		sctp_add_cmd_sf(commands, SCTP_CMD_TIMER_STOP,
 				SCTP_TO(SCTP_EVENT_TIMEOUT_T4_RTO));
+		sctp_add_cmd_sf(commands, SCTP_CMD_SET_SK_ERR,
+				SCTP_ERROR(ETIMEDOUT));
 		sctp_add_cmd_sf(commands, SCTP_CMD_ASSOC_FAILED,
 				SCTP_U32(SCTP_ERROR_NO_ERROR));
 		SCTP_INC_STATS(SCTP_MIB_ABORTEDS);
@@ -4867,6 +4893,8 @@ sctp_disposition_t sctp_sf_t5_timer_expire(const struct sctp_endpoint *ep,
 		goto nomem;
 
 	sctp_add_cmd_sf(commands, SCTP_CMD_REPLY, SCTP_CHUNK(reply));
+	sctp_add_cmd_sf(commands, SCTP_CMD_SET_SK_ERR,
+			SCTP_ERROR(ETIMEDOUT));
 	sctp_add_cmd_sf(commands, SCTP_CMD_ASSOC_FAILED,
 			SCTP_U32(SCTP_ERROR_NO_ERROR));
 
@@ -5151,7 +5179,9 @@ static int sctp_eat_data(const struct sctp_association *asoc,
 	int tmp;
 	__u32 tsn;
 	int account_value;
+	struct sctp_tsnmap *map = (struct sctp_tsnmap *)&asoc->peer.tsn_map;
 	struct sock *sk = asoc->base.sk;
+	int rcvbuf_over = 0;
 
 	data_hdr = chunk->subh.data_hdr = (sctp_datahdr_t *)chunk->skb->data;
 	skb_pull(chunk->skb, sizeof(sctp_datahdr_t));
@@ -5162,10 +5192,16 @@ static int sctp_eat_data(const struct sctp_association *asoc,
 	/* ASSERT:  Now skb->data is really the user data.  */
 
 	/*
-	 * if we are established, and we have used up our receive
-	 * buffer memory, drop the frame
-	 */
-	if (asoc->state == SCTP_STATE_ESTABLISHED) {
+	 * If we are established, and we have used up our receive buffer
+	 * memory, think about droping the frame.
+	 * Note that we have an opportunity to improve performance here.
+	 * If we accept one chunk from an skbuff, we have to keep all the
+	 * memory of that skbuff around until the chunk is read into user
+	 * space. Therefore, once we accept 1 chunk we may as well accept all
+	 * remaining chunks in the skbuff. The data_accepted flag helps us do
+	 * that.
+	 */
+	if ((asoc->state == SCTP_STATE_ESTABLISHED) && (!chunk->data_accepted)) {
 		/*
 		 * If the receive buffer policy is 1, then each
 		 * association can allocate up to sk_rcvbuf bytes
@@ -5176,9 +5212,25 @@ static int sctp_eat_data(const struct sctp_association *asoc,
 			account_value = atomic_read(&asoc->rmem_alloc);
 		else
 			account_value = atomic_read(&sk->sk_rmem_alloc);
-
-		if (account_value > sk->sk_rcvbuf)
-			return SCTP_IERROR_IGNORE_TSN;
+		if (account_value > sk->sk_rcvbuf) {
+			/*
+			 * We need to make forward progress, even when we are
+			 * under memory pressure, so we always allow the
+			 * next tsn after the ctsn ack point to be accepted.
+			 * This lets us avoid deadlocks in which we have to
+			 * drop frames that would otherwise let us drain the
+			 * receive queue.
+			 */
+			if ((sctp_tsnmap_get_ctsn(map) + 1) != tsn)
+				return SCTP_IERROR_IGNORE_TSN;
+
+			/*
+			 * We're going to accept the frame but we should renege
+			 * to make space for it. This will send us down that
+			 * path later in this function.
+			 */
+			rcvbuf_over = 1;
+		}
 	}
 
 	/* Process ECN based congestion.
@@ -5226,6 +5278,7 @@ static int sctp_eat_data(const struct sctp_association *asoc,
 	datalen -= sizeof(sctp_data_chunk_t);
 
 	deliver = SCTP_CMD_CHUNK_ULP;
+	chunk->data_accepted = 1;
 
 	/* Think about partial delivery. */
 	if ((datalen >= asoc->rwnd) && (!asoc->ulpq.pd_mode)) {
@@ -5242,7 +5295,8 @@ static int sctp_eat_data(const struct sctp_association *asoc,
 	 * large spill over.
 	 */
 	if (!asoc->rwnd || asoc->rwnd_over ||
-	    (datalen > asoc->rwnd + asoc->frag_point)) {
+	    (datalen > asoc->rwnd + asoc->frag_point) ||
+	    rcvbuf_over) {
 
 		/* If this is the next TSN, consider reneging to make
 		 * room.   Note: Playing nice with a confused sender.  A
@@ -5250,8 +5304,8 @@ static int sctp_eat_data(const struct sctp_association *asoc,
 		 * space and in the future we may want to detect and
 		 * do more drastic reneging.
 		 */
-		if (sctp_tsnmap_has_gap(&asoc->peer.tsn_map) &&
-		    (sctp_tsnmap_get_ctsn(&asoc->peer.tsn_map) + 1) == tsn) {
+		if (sctp_tsnmap_has_gap(map) &&
+		    (sctp_tsnmap_get_ctsn(map) + 1) == tsn) {
 			SCTP_DEBUG_PRINTK("Reneging for tsn:%u\n", tsn);
 			deliver = SCTP_CMD_RENEGE;
 		} else {
@@ -5280,6 +5334,8 @@ static int sctp_eat_data(const struct sctp_association *asoc,
 		 * processing the rest of the chunks in the packet.
 		 */
 		sctp_add_cmd_sf(commands, SCTP_CMD_DISCARD_PACKET,SCTP_NULL());
+		sctp_add_cmd_sf(commands, SCTP_CMD_SET_SK_ERR,
+				SCTP_ERROR(ECONNABORTED));
 		sctp_add_cmd_sf(commands, SCTP_CMD_ASSOC_FAILED,
 				SCTP_U32(SCTP_ERROR_NO_DATA));
 		SCTP_INC_STATS(SCTP_MIB_ABORTEDS);
diff --git a/net/sctp/sm_statetable.c b/net/sctp/sm_statetable.c
index 75ef10408764..8bcca5676151 100644
--- a/net/sctp/sm_statetable.c
+++ b/net/sctp/sm_statetable.c
@@ -366,9 +366,9 @@ const sctp_sm_table_entry_t *sctp_sm_lookup_event(sctp_event_t event_type,
 	/* SCTP_STATE_EMPTY */ \
 	{.fn = sctp_sf_ootb, .name = "sctp_sf_ootb"}, \
 	/* SCTP_STATE_CLOSED */ \
-	{.fn = sctp_sf_bug, .name = "sctp_sf_bug"}, \
+	{.fn = sctp_sf_discard_chunk, .name = "sctp_sf_discard_chunk"}, \
 	/* SCTP_STATE_COOKIE_WAIT */ \
-	{.fn = sctp_sf_bug, .name = "sctp_sf_bug"}, \
+	{.fn = sctp_sf_discard_chunk, .name = "sctp_sf_discard_chunk"}, \
 	/* SCTP_STATE_COOKIE_ECHOED */ \
 	{.fn = sctp_sf_do_ecne, .name = "sctp_sf_do_ecne"}, \
 	/* SCTP_STATE_ESTABLISHED */ \
@@ -380,7 +380,7 @@ const sctp_sm_table_entry_t *sctp_sm_lookup_event(sctp_event_t event_type,
 	/* SCTP_STATE_SHUTDOWN_RECEIVED */ \
 	{.fn = sctp_sf_do_ecne, .name = "sctp_sf_do_ecne"}, \
 	/* SCTP_STATE_SHUTDOWN_ACK_SENT */ \
-	{.fn = sctp_sf_bug, .name = "sctp_sf_bug"}, \
+	{.fn = sctp_sf_discard_chunk, .name = "sctp_sf_discard_chunk"}, \
 } /* TYPE_SCTP_ECN_ECNE */
 
 #define TYPE_SCTP_ECN_CWR { \
@@ -401,7 +401,7 @@ const sctp_sm_table_entry_t *sctp_sm_lookup_event(sctp_event_t event_type,
 	/* SCTP_STATE_SHUTDOWN_RECEIVED */ \
 	{.fn = sctp_sf_discard_chunk, .name = "sctp_sf_discard_chunk"}, \
 	/* SCTP_STATE_SHUTDOWN_ACK_SENT */ \
-	{.fn = sctp_sf_bug, .name = "sctp_sf_bug"}, \
+	{.fn = sctp_sf_discard_chunk, .name = "sctp_sf_discard_chunk"}, \
 } /* TYPE_SCTP_ECN_CWR */
 
 #define TYPE_SCTP_SHUTDOWN_COMPLETE { \
@@ -647,7 +647,7 @@ chunk_event_table_unknown[SCTP_STATE_NUM_STATES] = {
 	/* SCTP_STATE_EMPTY */ \
 	{.fn = sctp_sf_bug, .name = "sctp_sf_bug"}, \
 	/* SCTP_STATE_CLOSED */ \
-	{.fn = sctp_sf_bug, .name = "sctp_sf_bug"}, \
+	{.fn = sctp_sf_error_closed, .name = "sctp_sf_error_closed"}, \
 	/* SCTP_STATE_COOKIE_WAIT */ \
 	{.fn = sctp_sf_do_prm_requestheartbeat,		      \
 	 .name = "sctp_sf_do_prm_requestheartbeat"},          \
diff --git a/net/sctp/socket.c b/net/sctp/socket.c
index b6e4b89539b3..174d4d35e951 100644
--- a/net/sctp/socket.c
+++ b/net/sctp/socket.c
@@ -1057,6 +1057,7 @@ static int __sctp_connect(struct sock* sk,
 	inet_sk(sk)->dport = htons(asoc->peer.port);
 	af = sctp_get_af_specific(to.sa.sa_family);
 	af->to_sk_daddr(&to, sk);
+	sk->sk_err = 0;
 
 	timeo = sock_sndtimeo(sk, sk->sk_socket->file->f_flags & O_NONBLOCK);
 	err = sctp_wait_for_connect(asoc, &timeo);
@@ -1228,7 +1229,7 @@ SCTP_STATIC void sctp_close(struct sock *sk, long timeout)
 
 	ep = sctp_sk(sk)->ep;
 
-	/* Walk all associations on a socket, not on an endpoint.  */
+	/* Walk all associations on an endpoint.  */
 	list_for_each_safe(pos, temp, &ep->asocs) {
 		asoc = list_entry(pos, struct sctp_association, asocs);
 
@@ -1241,13 +1242,13 @@ SCTP_STATIC void sctp_close(struct sock *sk, long timeout)
 			if (sctp_state(asoc, CLOSED)) {
 				sctp_unhash_established(asoc);
 				sctp_association_free(asoc);
+				continue;
+			}
+		}
 
-			} else if (sock_flag(sk, SOCK_LINGER) &&
-				   !sk->sk_lingertime)
-				sctp_primitive_ABORT(asoc, NULL);
-			else
-				sctp_primitive_SHUTDOWN(asoc, NULL);
-		} else
+		if (sock_flag(sk, SOCK_LINGER) && !sk->sk_lingertime)
+			sctp_primitive_ABORT(asoc, NULL);
+		else
 			sctp_primitive_SHUTDOWN(asoc, NULL);
 	}
 
@@ -5317,6 +5318,7 @@ static int sctp_wait_for_sndbuf(struct sctp_association *asoc, long *timeo_p,
 		 */
 		sctp_release_sock(sk);
 		current_timeo = schedule_timeout(current_timeo);
+		BUG_ON(sk != asoc->base.sk);
 		sctp_lock_sock(sk);
 
 		*timeo_p = current_timeo;
@@ -5604,12 +5606,14 @@ static void sctp_sock_migrate(struct sock *oldsk, struct sock *newsk,
 	 */
 	newsp->type = type;
 
-	spin_lock_bh(&oldsk->sk_lock.slock);
-	/* Migrate the backlog from oldsk to newsk. */
-	sctp_backlog_migrate(assoc, oldsk, newsk);
-	/* Migrate the association to the new socket. */
+	/* Mark the new socket "in-use" by the user so that any packets
+	 * that may arrive on the association after we've moved it are
+	 * queued to the backlog.  This prevents a potential race between
+	 * backlog processing on the old socket and new-packet processing
+	 * on the new socket.
+	 */
+	sctp_lock_sock(newsk);
 	sctp_assoc_migrate(assoc, newsk);
-	spin_unlock_bh(&oldsk->sk_lock.slock);
 
 	/* If the association on the newsk is already closed before accept()
 	 * is called, set RCV_SHUTDOWN flag.
@@ -5618,6 +5622,7 @@ static void sctp_sock_migrate(struct sock *oldsk, struct sock *newsk,
 		newsk->sk_shutdown |= RCV_SHUTDOWN;
 
 	newsk->sk_state = SCTP_SS_ESTABLISHED;
+	sctp_release_sock(newsk);
 }
 
 /* This proto struct describes the ULP interface for SCTP.  */
diff --git a/net/sctp/ulpqueue.c b/net/sctp/ulpqueue.c
index 2080b2d28c98..575e556aeb3e 100644
--- a/net/sctp/ulpqueue.c
+++ b/net/sctp/ulpqueue.c
@@ -279,6 +279,7 @@ static inline void sctp_ulpq_store_reasm(struct sctp_ulpq *ulpq,
 static struct sctp_ulpevent *sctp_make_reassembled_event(struct sk_buff_head *queue, struct sk_buff *f_frag, struct sk_buff *l_frag)
 {
 	struct sk_buff *pos;
+	struct sk_buff *new = NULL;
 	struct sctp_ulpevent *event;
 	struct sk_buff *pnext, *last;
 	struct sk_buff *list = skb_shinfo(f_frag)->frag_list;
@@ -297,11 +298,33 @@ static struct sctp_ulpevent *sctp_make_reassembled_event(struct sk_buff_head *qu
 	 */
 	if (last)
 		last->next = pos;
-	else
-		skb_shinfo(f_frag)->frag_list = pos;
+ 	else {
+ 		if (skb_cloned(f_frag)) {
+ 			/* This is a cloned skb, we can't just modify
+ 			 * the frag_list.  We need a new skb to do that.
+ 			 * Instead of calling skb_unshare(), we'll do it
+ 			 * ourselves since we need to delay the free.
+ 			 */
+ 			new = skb_copy(f_frag, GFP_ATOMIC);
+ 			if (!new)
+ 				return NULL;	/* try again later */
+
+ 			new->sk = f_frag->sk;
+
+ 			skb_shinfo(new)->frag_list = pos;
+ 		} else
+ 			skb_shinfo(f_frag)->frag_list = pos;
+ 	}
 
 	/* Remove the first fragment from the reassembly queue.  */
 	__skb_unlink(f_frag, queue);
+
+ 	/* if we did unshare, then free the old skb and re-assign */
+ 	if (new) {
+ 		kfree_skb(f_frag);
+ 		f_frag = new;
+ 	}
+
 	while (pos) {
 
 		pnext = pos->next;
diff --git a/net/socket.c b/net/socket.c
index 23898f45f713..02948b622bd2 100644
--- a/net/socket.c
+++ b/net/socket.c
@@ -267,6 +267,8 @@ int move_addr_to_user(void *kaddr, int klen, void __user *uaddr, int __user *ule
 		return -EINVAL;
 	if(len)
 	{
+		if (audit_sockaddr(klen, kaddr))
+			return -ENOMEM;
 		if(copy_to_user(uaddr,kaddr,len))
 			return -EFAULT;
 	}
@@ -490,6 +492,7 @@ static struct socket *sockfd_lookup_light(int fd, int *err, int *fput_needed)
 	struct file *file;
 	struct socket *sock;
 
+	*err = -EBADF;
 	file = fget_light(fd, fput_needed);
 	if (file) {
 		sock = sock_from_file(file, err);
diff --git a/net/sunrpc/auth_gss/auth_gss.c b/net/sunrpc/auth_gss/auth_gss.c
index 900ef31f5a0e..519ebc17c028 100644
--- a/net/sunrpc/auth_gss/auth_gss.c
+++ b/net/sunrpc/auth_gss/auth_gss.c
@@ -794,7 +794,6 @@ gss_create_cred(struct rpc_auth *auth, struct auth_cred *acred, int flags)
 
 out_err:
 	dprintk("RPC:      gss_create_cred failed with error %d\n", err);
-	if (cred) gss_destroy_cred(&cred->gc_base);
 	return ERR_PTR(err);
 }
 
diff --git a/net/sunrpc/auth_gss/gss_krb5_crypto.c b/net/sunrpc/auth_gss/gss_krb5_crypto.c
index 97c981fa6b8e..76b969e6904f 100644
--- a/net/sunrpc/auth_gss/gss_krb5_crypto.c
+++ b/net/sunrpc/auth_gss/gss_krb5_crypto.c
@@ -212,7 +212,6 @@ make_checksum(s32 cksumtype, char *header, int hdrlen, struct xdr_buf *body,
 	char                            *cksumname;
 	struct crypto_tfm               *tfm = NULL; /* XXX add to ctx? */
 	struct scatterlist              sg[1];
-	u32                             code = GSS_S_FAILURE;
 
 	switch (cksumtype) {
 		case CKSUMTYPE_RSA_MD5:
@@ -221,13 +220,11 @@ make_checksum(s32 cksumtype, char *header, int hdrlen, struct xdr_buf *body,
 		default:
 			dprintk("RPC:      krb5_make_checksum:"
 				" unsupported checksum %d", cksumtype);
-			goto out;
+			return GSS_S_FAILURE;
 	}
 	if (!(tfm = crypto_alloc_tfm(cksumname, CRYPTO_TFM_REQ_MAY_SLEEP)))
-		goto out;
+		return GSS_S_FAILURE;
 	cksum->len = crypto_tfm_alg_digestsize(tfm);
-	if ((cksum->data = kmalloc(cksum->len, GFP_KERNEL)) == NULL)
-		goto out;
 
 	crypto_digest_init(tfm);
 	sg_set_buf(sg, header, hdrlen);
@@ -235,10 +232,8 @@ make_checksum(s32 cksumtype, char *header, int hdrlen, struct xdr_buf *body,
 	process_xdr_buf(body, body_offset, body->len - body_offset,
 			checksummer, tfm);
 	crypto_digest_final(tfm, cksum->data);
-	code = 0;
-out:
 	crypto_free_tfm(tfm);
-	return code;
+	return 0;
 }
 
 EXPORT_SYMBOL(make_checksum);
diff --git a/net/sunrpc/cache.c b/net/sunrpc/cache.c
index 3ac4193a78ed..7026b0866b7b 100644
--- a/net/sunrpc/cache.c
+++ b/net/sunrpc/cache.c
@@ -159,6 +159,7 @@ struct cache_head *sunrpc_cache_update(struct cache_detail *detail,
 		detail->update(tmp, new);
 	tmp->next = *head;
 	*head = tmp;
+	detail->entries++;
 	cache_get(tmp);
 	is_new = cache_fresh_locked(tmp, new->expiry_time);
 	cache_fresh_locked(old, 0);
diff --git a/net/sunrpc/stats.c b/net/sunrpc/stats.c
index dea529666d69..15c2db26767b 100644
--- a/net/sunrpc/stats.c
+++ b/net/sunrpc/stats.c
@@ -176,7 +176,8 @@ void rpc_count_iostats(struct rpc_task *task)
 	op_metrics->om_execute += execute;
 }
 
-void _print_name(struct seq_file *seq, unsigned int op, struct rpc_procinfo *procs)
+static void _print_name(struct seq_file *seq, unsigned int op,
+			struct rpc_procinfo *procs)
 {
 	if (procs[op].p_name)
 		seq_printf(seq, "\t%12s: ", procs[op].p_name);
diff --git a/net/sysctl_net.c b/net/sysctl_net.c
index 55538f6b60ff..58a1b6b42ddd 100644
--- a/net/sysctl_net.c
+++ b/net/sysctl_net.c
@@ -37,14 +37,6 @@ struct ctl_table net_table[] = {
 		.mode		= 0555,
 		.child		= core_table,
 	},
-#ifdef CONFIG_NET
-	{
-		.ctl_name	= NET_ETHER,
-		.procname	= "ethernet",
-		.mode		= 0555,
-		.child		= ether_table,
-	},
-#endif
 #ifdef CONFIG_INET
 	{
 		.ctl_name	= NET_IPV4,
diff --git a/net/tipc/name_distr.c b/net/tipc/name_distr.c
index 953307a9df1d..a3bbc891f959 100644
--- a/net/tipc/name_distr.c
+++ b/net/tipc/name_distr.c
@@ -229,8 +229,7 @@ static void node_is_down(struct publication *publ)
 				     publ->node, publ->ref, publ->key);
         assert(p == publ);
 	write_unlock_bh(&tipc_nametbl_lock);
-	if (publ)
-		kfree(publ);
+	kfree(publ);
 }
 
 /**
diff --git a/net/x25/x25_timer.c b/net/x25/x25_timer.c
index 0a92e1da3922..71ff3088f6fe 100644
--- a/net/x25/x25_timer.c
+++ b/net/x25/x25_timer.c
@@ -114,8 +114,9 @@ static void x25_heartbeat_expiry(unsigned long param)
 			if (sock_flag(sk, SOCK_DESTROY) ||
 			    (sk->sk_state == TCP_LISTEN &&
 			     sock_flag(sk, SOCK_DEAD))) {
+				bh_unlock_sock(sk);
 				x25_destroy_socket(sk);
-				goto unlock;
+				return;
 			}
 			break;
 
@@ -128,7 +129,6 @@ static void x25_heartbeat_expiry(unsigned long param)
 	}
 restart_heartbeat:
 	x25_start_heartbeat(sk);
-unlock:
 	bh_unlock_sock(sk);
 }
 
diff --git a/net/xfrm/xfrm_input.c b/net/xfrm/xfrm_input.c
index b54971059f16..891a6090cc09 100644
--- a/net/xfrm/xfrm_input.c
+++ b/net/xfrm/xfrm_input.c
@@ -62,7 +62,7 @@ int xfrm_parse_spi(struct sk_buff *skb, u8 nexthdr, u32 *spi, u32 *seq)
 	case IPPROTO_COMP:
 		if (!pskb_may_pull(skb, sizeof(struct ip_comp_hdr)))
 			return -EINVAL;
-		*spi = ntohl(ntohs(*(u16*)(skb->h.raw + 2)));
+		*spi = htonl(ntohs(*(u16*)(skb->h.raw + 2)));
 		*seq = 0;
 		return 0;
 	default:
diff --git a/net/xfrm/xfrm_policy.c b/net/xfrm/xfrm_policy.c
index c3725fe2a8fb..b469c8b54613 100644
--- a/net/xfrm/xfrm_policy.c
+++ b/net/xfrm/xfrm_policy.c
@@ -57,12 +57,12 @@ int xfrm_register_type(struct xfrm_type *type, unsigned short family)
 		return -EAFNOSUPPORT;
 	typemap = afinfo->type_map;
 
-	write_lock(&typemap->lock);
+	write_lock_bh(&typemap->lock);
 	if (likely(typemap->map[type->proto] == NULL))
 		typemap->map[type->proto] = type;
 	else
 		err = -EEXIST;
-	write_unlock(&typemap->lock);
+	write_unlock_bh(&typemap->lock);
 	xfrm_policy_put_afinfo(afinfo);
 	return err;
 }
@@ -78,12 +78,12 @@ int xfrm_unregister_type(struct xfrm_type *type, unsigned short family)
 		return -EAFNOSUPPORT;
 	typemap = afinfo->type_map;
 
-	write_lock(&typemap->lock);
+	write_lock_bh(&typemap->lock);
 	if (unlikely(typemap->map[type->proto] != type))
 		err = -ENOENT;
 	else
 		typemap->map[type->proto] = NULL;
-	write_unlock(&typemap->lock);
+	write_unlock_bh(&typemap->lock);
 	xfrm_policy_put_afinfo(afinfo);
 	return err;
 }
@@ -1251,7 +1251,7 @@ int xfrm_policy_register_afinfo(struct xfrm_policy_afinfo *afinfo)
 		return -EINVAL;
 	if (unlikely(afinfo->family >= NPROTO))
 		return -EAFNOSUPPORT;
-	write_lock(&xfrm_policy_afinfo_lock);
+	write_lock_bh(&xfrm_policy_afinfo_lock);
 	if (unlikely(xfrm_policy_afinfo[afinfo->family] != NULL))
 		err = -ENOBUFS;
 	else {
@@ -1268,7 +1268,7 @@ int xfrm_policy_register_afinfo(struct xfrm_policy_afinfo *afinfo)
 			afinfo->garbage_collect = __xfrm_garbage_collect;
 		xfrm_policy_afinfo[afinfo->family] = afinfo;
 	}
-	write_unlock(&xfrm_policy_afinfo_lock);
+	write_unlock_bh(&xfrm_policy_afinfo_lock);
 	return err;
 }
 EXPORT_SYMBOL(xfrm_policy_register_afinfo);
@@ -1280,7 +1280,7 @@ int xfrm_policy_unregister_afinfo(struct xfrm_policy_afinfo *afinfo)
 		return -EINVAL;
 	if (unlikely(afinfo->family >= NPROTO))
 		return -EAFNOSUPPORT;
-	write_lock(&xfrm_policy_afinfo_lock);
+	write_lock_bh(&xfrm_policy_afinfo_lock);
 	if (likely(xfrm_policy_afinfo[afinfo->family] != NULL)) {
 		if (unlikely(xfrm_policy_afinfo[afinfo->family] != afinfo))
 			err = -EINVAL;
@@ -1294,7 +1294,7 @@ int xfrm_policy_unregister_afinfo(struct xfrm_policy_afinfo *afinfo)
 			afinfo->garbage_collect = NULL;
 		}
 	}
-	write_unlock(&xfrm_policy_afinfo_lock);
+	write_unlock_bh(&xfrm_policy_afinfo_lock);
 	return err;
 }
 EXPORT_SYMBOL(xfrm_policy_unregister_afinfo);
diff --git a/net/xfrm/xfrm_state.c b/net/xfrm/xfrm_state.c
index a8e14dc1b04e..93a2f36ad3db 100644
--- a/net/xfrm/xfrm_state.c
+++ b/net/xfrm/xfrm_state.c
@@ -805,16 +805,22 @@ void xfrm_replay_notify(struct xfrm_state *x, int event)
 	case XFRM_REPLAY_UPDATE:
 		if (x->replay_maxdiff &&
 		    (x->replay.seq - x->preplay.seq < x->replay_maxdiff) &&
-		    (x->replay.oseq - x->preplay.oseq < x->replay_maxdiff))
-			return;
+		    (x->replay.oseq - x->preplay.oseq < x->replay_maxdiff)) {
+			if (x->xflags & XFRM_TIME_DEFER)
+				event = XFRM_REPLAY_TIMEOUT;
+			else
+				return;
+		}
 
 		break;
 
 	case XFRM_REPLAY_TIMEOUT:
 		if ((x->replay.seq == x->preplay.seq) &&
 		    (x->replay.bitmap == x->preplay.bitmap) &&
-		    (x->replay.oseq == x->preplay.oseq))
+		    (x->replay.oseq == x->preplay.oseq)) {
+			x->xflags |= XFRM_TIME_DEFER;
 			return;
+		}
 
 		break;
 	}
@@ -825,8 +831,10 @@ void xfrm_replay_notify(struct xfrm_state *x, int event)
 	km_state_notify(x, &c);
 
 	if (x->replay_maxage &&
-	    !mod_timer(&x->rtimer, jiffies + x->replay_maxage))
+	    !mod_timer(&x->rtimer, jiffies + x->replay_maxage)) {
 		xfrm_state_hold(x);
+		x->xflags &= ~XFRM_TIME_DEFER;
+	}
 }
 EXPORT_SYMBOL(xfrm_replay_notify);
 
@@ -836,10 +844,15 @@ static void xfrm_replay_timer_handler(unsigned long data)
 
 	spin_lock(&x->lock);
 
-	if (xfrm_aevent_is_on() && x->km.state == XFRM_STATE_VALID)
-		xfrm_replay_notify(x, XFRM_REPLAY_TIMEOUT);
+	if (x->km.state == XFRM_STATE_VALID) {
+		if (xfrm_aevent_is_on())
+			xfrm_replay_notify(x, XFRM_REPLAY_TIMEOUT);
+		else
+			x->xflags |= XFRM_TIME_DEFER;
+	}
 
 	spin_unlock(&x->lock);
+	xfrm_state_put(x);
 }
 
 int xfrm_replay_check(struct xfrm_state *x, u32 seq)
@@ -1048,7 +1061,7 @@ int xfrm_state_register_afinfo(struct xfrm_state_afinfo *afinfo)
 		return -EINVAL;
 	if (unlikely(afinfo->family >= NPROTO))
 		return -EAFNOSUPPORT;
-	write_lock(&xfrm_state_afinfo_lock);
+	write_lock_bh(&xfrm_state_afinfo_lock);
 	if (unlikely(xfrm_state_afinfo[afinfo->family] != NULL))
 		err = -ENOBUFS;
 	else {
@@ -1056,7 +1069,7 @@ int xfrm_state_register_afinfo(struct xfrm_state_afinfo *afinfo)
 		afinfo->state_byspi = xfrm_state_byspi;
 		xfrm_state_afinfo[afinfo->family] = afinfo;
 	}
-	write_unlock(&xfrm_state_afinfo_lock);
+	write_unlock_bh(&xfrm_state_afinfo_lock);
 	return err;
 }
 EXPORT_SYMBOL(xfrm_state_register_afinfo);
@@ -1068,7 +1081,7 @@ int xfrm_state_unregister_afinfo(struct xfrm_state_afinfo *afinfo)
 		return -EINVAL;
 	if (unlikely(afinfo->family >= NPROTO))
 		return -EAFNOSUPPORT;
-	write_lock(&xfrm_state_afinfo_lock);
+	write_lock_bh(&xfrm_state_afinfo_lock);
 	if (likely(xfrm_state_afinfo[afinfo->family] != NULL)) {
 		if (unlikely(xfrm_state_afinfo[afinfo->family] != afinfo))
 			err = -EINVAL;
@@ -1078,7 +1091,7 @@ int xfrm_state_unregister_afinfo(struct xfrm_state_afinfo *afinfo)
 			afinfo->state_bydst = NULL;
 		}
 	}
-	write_unlock(&xfrm_state_afinfo_lock);
+	write_unlock_bh(&xfrm_state_afinfo_lock);
 	return err;
 }
 EXPORT_SYMBOL(xfrm_state_unregister_afinfo);
diff --git a/scripts/gen_initramfs_list.sh b/scripts/gen_initramfs_list.sh
index 56b3bed1108f..331c079f029b 100644
--- a/scripts/gen_initramfs_list.sh
+++ b/scripts/gen_initramfs_list.sh
@@ -200,7 +200,11 @@ input_file() {
 			print_mtime "$1" >> ${output}
 			cat "$1"         >> ${output}
 		else
-			grep ^file "$1" | cut -d ' ' -f 3
+			cat "$1" | while read type dir file perm ; do
+				if [ "$type" == "file" ]; then
+					echo "$file \\";
+				fi
+			done
 		fi
 	elif [ -d "$1" ]; then
 		dir_filelist "$1"
diff --git a/scripts/kconfig/conf.c b/scripts/kconfig/conf.c
index ae5ab981bb1d..8012d1076876 100644
--- a/scripts/kconfig/conf.c
+++ b/scripts/kconfig/conf.c
@@ -5,6 +5,7 @@
 
 #include <ctype.h>
 #include <stdlib.h>
+#include <stdio.h>
 #include <string.h>
 #include <unistd.h>
 #include <time.h>
@@ -531,7 +532,7 @@ int main(int ac, char **av)
 			break;
 		case 'h':
 		case '?':
-			printf("%s [-o|-s] config\n", av[0]);
+			fprintf(stderr, "See README for usage info\n");
 			exit(0);
 		}
 	}
diff --git a/scripts/kconfig/lxdialog/checklist.c b/scripts/kconfig/lxdialog/checklist.c
index db07ae73e051..be0200e9cdaf 100644
--- a/scripts/kconfig/lxdialog/checklist.c
+++ b/scripts/kconfig/lxdialog/checklist.c
@@ -196,8 +196,8 @@ int dialog_checklist(const char *title, const char *prompt, int height,
 
 	print_buttons(dialog, height, width, 0);
 
-	wnoutrefresh(list);
 	wnoutrefresh(dialog);
+	wnoutrefresh(list);
 	doupdate();
 
 	while (key != ESC) {
@@ -225,12 +225,11 @@ int dialog_checklist(const char *title, const char *prompt, int height,
 					}
 					scroll--;
 					print_item(list, items[scroll * 3 + 1], status[scroll], 0, TRUE);
-					wnoutrefresh(list);
-
 					print_arrows(dialog, choice, item_no,
 						     scroll, box_y, box_x + check_x + 5, list_height);
 
-					wrefresh(dialog);
+					wnoutrefresh(dialog);
+					wrefresh(list);
 
 					continue;	/* wait for another key press */
 				} else
@@ -252,12 +251,12 @@ int dialog_checklist(const char *title, const char *prompt, int height,
 					scroll++;
 					print_item(list, items[(scroll + max_choice - 1) * 3 + 1],
 						   status[scroll + max_choice - 1], max_choice - 1, TRUE);
-					wnoutrefresh(list);
 
 					print_arrows(dialog, choice, item_no,
 						     scroll, box_y, box_x + check_x + 5, list_height);
 
-					wrefresh(dialog);
+					wnoutrefresh(dialog);
+					wrefresh(list);
 
 					continue;	/* wait for another key press */
 				} else
@@ -271,8 +270,8 @@ int dialog_checklist(const char *title, const char *prompt, int height,
 				choice = i;
 				print_item(list, items[(scroll + choice) * 3 + 1],
 					   status[scroll + choice], choice, TRUE);
-				wnoutrefresh(list);
-				wrefresh(dialog);
+				wnoutrefresh(dialog);
+				wrefresh(list);
 			}
 			continue;	/* wait for another key press */
 		}
@@ -306,8 +305,8 @@ int dialog_checklist(const char *title, const char *prompt, int height,
 						print_item(list, items[(scroll + i) * 3 + 1],
 							   status[scroll + i], i, i == choice);
 				}
-				wnoutrefresh(list);
-				wrefresh(dialog);
+				wnoutrefresh(dialog);
+				wrefresh(list);
 
 				for (i = 0; i < item_no; i++)
 					if (status[i])
diff --git a/scripts/mkmakefile b/scripts/mkmakefile
index a22cbedd3b3e..7f9d544f9b6c 100644
--- a/scripts/mkmakefile
+++ b/scripts/mkmakefile
@@ -10,7 +10,10 @@
 # $4 - patchlevel
 
 
-cat << EOF
+test ! -r $2/Makefile -o -O $2/Makefile || exit 0
+echo "  GEN     $2/Makefile"
+
+cat << EOF > $2/Makefile
 # Automatically generated by $0: don't edit
 
 VERSION = $3
diff --git a/scripts/mod/file2alias.c b/scripts/mod/file2alias.c
index 84e21201f3c0..37f67c23e11b 100644
--- a/scripts/mod/file2alias.c
+++ b/scripts/mod/file2alias.c
@@ -374,10 +374,10 @@ static void do_input(char *alias,
 		     kernel_ulong_t *arr, unsigned int min, unsigned int max)
 {
 	unsigned int i;
-	for (i = min; i < max; i++) {
-		if (arr[i/BITS_PER_LONG] & (1 << (i%BITS_PER_LONG)))
-			sprintf(alias+strlen(alias), "%X,*", i);
-	}
+
+	for (i = min; i < max; i++)
+		if (arr[i / BITS_PER_LONG] & (1 << (i%BITS_PER_LONG)))
+			sprintf(alias + strlen(alias), "%X,*", i);
 }
 
 /* input:b0v0p0e0-eXkXrXaXmXlXsXfXwX where X is comma-separated %02X. */
@@ -386,39 +386,37 @@ static int do_input_entry(const char *filename, struct input_device_id *id,
 {
 	sprintf(alias, "input:");
 
-	ADD(alias, "b", id->flags&INPUT_DEVICE_ID_MATCH_BUS, id->id.bustype);
-	ADD(alias, "v", id->flags&INPUT_DEVICE_ID_MATCH_VENDOR, id->id.vendor);
-	ADD(alias, "p", id->flags&INPUT_DEVICE_ID_MATCH_PRODUCT,
-	    id->id.product);
-	ADD(alias, "e", id->flags&INPUT_DEVICE_ID_MATCH_VERSION,
-	    id->id.version);
+	ADD(alias, "b", id->flags & INPUT_DEVICE_ID_MATCH_BUS, id->bustype);
+	ADD(alias, "v", id->flags & INPUT_DEVICE_ID_MATCH_VENDOR, id->vendor);
+	ADD(alias, "p", id->flags & INPUT_DEVICE_ID_MATCH_PRODUCT, id->product);
+	ADD(alias, "e", id->flags & INPUT_DEVICE_ID_MATCH_VERSION, id->version);
 
 	sprintf(alias + strlen(alias), "-e*");
-	if (id->flags&INPUT_DEVICE_ID_MATCH_EVBIT)
+	if (id->flags & INPUT_DEVICE_ID_MATCH_EVBIT)
 		do_input(alias, id->evbit, 0, EV_MAX);
 	sprintf(alias + strlen(alias), "k*");
-	if (id->flags&INPUT_DEVICE_ID_MATCH_KEYBIT)
+	if (id->flags & INPUT_DEVICE_ID_MATCH_KEYBIT)
 		do_input(alias, id->keybit, KEY_MIN_INTERESTING, KEY_MAX);
 	sprintf(alias + strlen(alias), "r*");
-	if (id->flags&INPUT_DEVICE_ID_MATCH_RELBIT)
+	if (id->flags & INPUT_DEVICE_ID_MATCH_RELBIT)
 		do_input(alias, id->relbit, 0, REL_MAX);
 	sprintf(alias + strlen(alias), "a*");
-	if (id->flags&INPUT_DEVICE_ID_MATCH_ABSBIT)
+	if (id->flags & INPUT_DEVICE_ID_MATCH_ABSBIT)
 		do_input(alias, id->absbit, 0, ABS_MAX);
 	sprintf(alias + strlen(alias), "m*");
-	if (id->flags&INPUT_DEVICE_ID_MATCH_MSCIT)
+	if (id->flags & INPUT_DEVICE_ID_MATCH_MSCIT)
 		do_input(alias, id->mscbit, 0, MSC_MAX);
 	sprintf(alias + strlen(alias), "l*");
-	if (id->flags&INPUT_DEVICE_ID_MATCH_LEDBIT)
+	if (id->flags & INPUT_DEVICE_ID_MATCH_LEDBIT)
 		do_input(alias, id->ledbit, 0, LED_MAX);
 	sprintf(alias + strlen(alias), "s*");
-	if (id->flags&INPUT_DEVICE_ID_MATCH_SNDBIT)
+	if (id->flags & INPUT_DEVICE_ID_MATCH_SNDBIT)
 		do_input(alias, id->sndbit, 0, SND_MAX);
 	sprintf(alias + strlen(alias), "f*");
-	if (id->flags&INPUT_DEVICE_ID_MATCH_FFBIT)
+	if (id->flags & INPUT_DEVICE_ID_MATCH_FFBIT)
 		do_input(alias, id->ffbit, 0, FF_MAX);
 	sprintf(alias + strlen(alias), "w*");
-	if (id->flags&INPUT_DEVICE_ID_MATCH_SWBIT)
+	if (id->flags & INPUT_DEVICE_ID_MATCH_SWBIT)
 		do_input(alias, id->swbit, 0, SW_MAX);
 	return 1;
 }
diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c
index 7e8079a34adf..d0f86ed43f7a 100644
--- a/scripts/mod/modpost.c
+++ b/scripts/mod/modpost.c
@@ -487,22 +487,24 @@ static int strrcmp(const char *s, const char *sub)
  *   atsym   =__param*
  *
  * Pattern 2:
- *   Many drivers utilise a *_driver container with references to
+ *   Many drivers utilise a *driver container with references to
  *   add, remove, probe functions etc.
  *   These functions may often be marked __init and we do not want to
  *   warn here.
  *   the pattern is identified by:
- *   tosec   = .init.text | .exit.text
+ *   tosec   = .init.text | .exit.text | .init.data
  *   fromsec = .data
- *   atsym = *_driver, *_ops, *_probe, *probe_one
+ *   atsym = *driver, *_template, *_sht, *_ops, *_probe, *probe_one
  **/
 static int secref_whitelist(const char *tosec, const char *fromsec,
-			  const char *atsym)
+			    const char *atsym)
 {
 	int f1 = 1, f2 = 1;
 	const char **s;
 	const char *pat2sym[] = {
-		"_driver",
+		"driver",
+		"_template", /* scsi uses *_template a lot */
+		"_sht",      /* scsi also used *_sht to some extent */
 		"_ops",
 		"_probe",
 		"_probe_one",
@@ -522,7 +524,8 @@ static int secref_whitelist(const char *tosec, const char *fromsec,
 
 	/* Check for pattern 2 */
 	if ((strcmp(tosec, ".init.text") != 0) &&
-	    (strcmp(tosec, ".exit.text") != 0))
+	    (strcmp(tosec, ".exit.text") != 0) &&
+	    (strcmp(tosec, ".init.data") != 0))
 		f2 = 0;
 	if (strcmp(fromsec, ".data") != 0)
 		f2 = 0;
@@ -694,29 +697,79 @@ static void check_sec_ref(struct module *mod, const char *modname,
 
 	/* Walk through all sections */
 	for (i = 0; i < hdr->e_shnum; i++) {
-		Elf_Rela *rela;
-		Elf_Rela *start = (void *)hdr + sechdrs[i].sh_offset;
-		Elf_Rela *stop  = (void*)start + sechdrs[i].sh_size;
-		const char *name = secstrings + sechdrs[i].sh_name +
-						strlen(".rela");
+		const char *name = secstrings + sechdrs[i].sh_name;
+		const char *secname;
+		Elf_Rela r;
+		unsigned int r_sym;
 		/* We want to process only relocation sections and not .init */
-		if (section_ref_ok(name) || (sechdrs[i].sh_type != SHT_RELA))
-			continue;
+		if (sechdrs[i].sh_type == SHT_RELA) {
+			Elf_Rela *rela;
+			Elf_Rela *start = (void *)hdr + sechdrs[i].sh_offset;
+			Elf_Rela *stop  = (void*)start + sechdrs[i].sh_size;
+			name += strlen(".rela");
+			if (section_ref_ok(name))
+				continue;
 
-		for (rela = start; rela < stop; rela++) {
-			Elf_Rela r;
-			const char *secname;
-			r.r_offset = TO_NATIVE(rela->r_offset);
-			r.r_info   = TO_NATIVE(rela->r_info);
-			r.r_addend = TO_NATIVE(rela->r_addend);
-			sym = elf->symtab_start + ELF_R_SYM(r.r_info);
-			/* Skip special sections */
-			if (sym->st_shndx >= SHN_LORESERVE)
+			for (rela = start; rela < stop; rela++) {
+				r.r_offset = TO_NATIVE(rela->r_offset);
+#if KERNEL_ELFCLASS == ELFCLASS64
+				if (hdr->e_machine == EM_MIPS) {
+					r_sym = ELF64_MIPS_R_SYM(rela->r_info);
+					r_sym = TO_NATIVE(r_sym);
+				} else {
+					r.r_info = TO_NATIVE(rela->r_info);
+					r_sym = ELF_R_SYM(r.r_info);
+				}
+#else
+				r.r_info = TO_NATIVE(rela->r_info);
+				r_sym = ELF_R_SYM(r.r_info);
+#endif
+				r.r_addend = TO_NATIVE(rela->r_addend);
+				sym = elf->symtab_start + r_sym;
+				/* Skip special sections */
+				if (sym->st_shndx >= SHN_LORESERVE)
+					continue;
+
+				secname = secstrings +
+					sechdrs[sym->st_shndx].sh_name;
+				if (section(secname))
+					warn_sec_mismatch(modname, name,
+							  elf, sym, r);
+			}
+		} else if (sechdrs[i].sh_type == SHT_REL) {
+			Elf_Rel *rel;
+			Elf_Rel *start = (void *)hdr + sechdrs[i].sh_offset;
+			Elf_Rel *stop  = (void*)start + sechdrs[i].sh_size;
+			name += strlen(".rel");
+			if (section_ref_ok(name))
 				continue;
 
-			secname = secstrings + sechdrs[sym->st_shndx].sh_name;
-			if (section(secname))
-				warn_sec_mismatch(modname, name, elf, sym, r);
+			for (rel = start; rel < stop; rel++) {
+				r.r_offset = TO_NATIVE(rel->r_offset);
+#if KERNEL_ELFCLASS == ELFCLASS64
+				if (hdr->e_machine == EM_MIPS) {
+					r_sym = ELF64_MIPS_R_SYM(rel->r_info);
+					r_sym = TO_NATIVE(r_sym);
+				} else {
+					r.r_info = TO_NATIVE(rel->r_info);
+					r_sym = ELF_R_SYM(r.r_info);
+				}
+#else
+				r.r_info = TO_NATIVE(rel->r_info);
+				r_sym = ELF_R_SYM(r.r_info);
+#endif
+				r.r_addend = 0;
+				sym = elf->symtab_start + r_sym;
+				/* Skip special sections */
+				if (sym->st_shndx >= SHN_LORESERVE)
+					continue;
+
+				secname = secstrings +
+					sechdrs[sym->st_shndx].sh_name;
+				if (section(secname))
+					warn_sec_mismatch(modname, name,
+							  elf, sym, r);
+			}
 		}
 	}
 }
@@ -820,6 +873,7 @@ static int exit_section(const char *name)
  * For our future {in}sanity, add a comment that this is the ppc .opd
  * section, not the ia64 .opd section.
  * ia64 .opd should not point to discarded sections.
+ * [.rodata] like for .init.text we ignore .rodata references -same reason
  **/
 static int exit_section_ref_ok(const char *name)
 {
@@ -829,6 +883,7 @@ static int exit_section_ref_ok(const char *name)
 		".exit.text",
 		".exit.data",
 		".init.text",
+		".rodata",
 		".opd", /* See comment [OPD] */
 		".toc1",  /* used by ppc64 */
 		".altinstructions",
diff --git a/scripts/mod/modpost.h b/scripts/mod/modpost.h
index b14255c72a37..861d866fcd83 100644
--- a/scripts/mod/modpost.h
+++ b/scripts/mod/modpost.h
@@ -21,6 +21,7 @@
 #define ELF_ST_BIND ELF32_ST_BIND
 #define ELF_ST_TYPE ELF32_ST_TYPE
 
+#define Elf_Rel     Elf32_Rel
 #define Elf_Rela    Elf32_Rela
 #define ELF_R_SYM   ELF32_R_SYM
 #define ELF_R_TYPE  ELF32_R_TYPE
@@ -34,11 +35,31 @@
 #define ELF_ST_BIND ELF64_ST_BIND
 #define ELF_ST_TYPE ELF64_ST_TYPE
 
+#define Elf_Rel     Elf64_Rel
 #define Elf_Rela    Elf64_Rela
 #define ELF_R_SYM   ELF64_R_SYM
 #define ELF_R_TYPE  ELF64_R_TYPE
 #endif
 
+/* The 64-bit MIPS ELF ABI uses an unusual reloc format. */
+typedef struct
+{
+	Elf32_Word    r_sym;	/* Symbol index */
+	unsigned char r_ssym;	/* Special symbol for 2nd relocation */
+	unsigned char r_type3;	/* 3rd relocation type */
+	unsigned char r_type2;	/* 2nd relocation type */
+	unsigned char r_type1;	/* 1st relocation type */
+} _Elf64_Mips_R_Info;
+
+typedef union
+{
+	Elf64_Xword		r_info_number;
+	_Elf64_Mips_R_Info	r_info_fields;
+} _Elf64_Mips_R_Info_union;
+
+#define ELF64_MIPS_R_SYM(i) \
+  ((__extension__ (_Elf64_Mips_R_Info_union)(i)).r_info_fields.r_sym)
+
 #if KERNEL_ELFDATA != HOST_ELFDATA
 
 static inline void __endian(const void *src, void *dest, unsigned int size)
@@ -48,8 +69,6 @@ static inline void __endian(const void *src, void *dest, unsigned int size)
 		((unsigned char*)dest)[i] = ((unsigned char*)src)[size - i-1];
 }
 
-
-
 #define TO_NATIVE(x)						\
 ({								\
 	typeof(x) __x;						\
diff --git a/security/dummy.c b/security/dummy.c
index fd99429278e9..8ccccccc12ac 100644
--- a/security/dummy.c
+++ b/security/dummy.c
@@ -563,11 +563,6 @@ static int dummy_ipc_permission (struct kern_ipc_perm *ipcp, short flag)
 	return 0;
 }
 
-static int dummy_ipc_getsecurity(struct kern_ipc_perm *ipcp, void *buffer, size_t size)
-{
-	return -EOPNOTSUPP;
-}
-
 static int dummy_msg_msg_alloc_security (struct msg_msg *msg)
 {
 	return 0;
@@ -976,7 +971,6 @@ void security_fixup_ops (struct security_operations *ops)
 	set_to_dummy_if_null(ops, task_reparent_to_init);
  	set_to_dummy_if_null(ops, task_to_inode);
 	set_to_dummy_if_null(ops, ipc_permission);
-	set_to_dummy_if_null(ops, ipc_getsecurity);
 	set_to_dummy_if_null(ops, msg_msg_alloc_security);
 	set_to_dummy_if_null(ops, msg_msg_free_security);
 	set_to_dummy_if_null(ops, msg_queue_alloc_security);
diff --git a/security/selinux/Makefile b/security/selinux/Makefile
index 688c0a267b62..faf2e02e4410 100644
--- a/security/selinux/Makefile
+++ b/security/selinux/Makefile
@@ -4,7 +4,7 @@
 
 obj-$(CONFIG_SECURITY_SELINUX) := selinux.o ss/
 
-selinux-y := avc.o hooks.o selinuxfs.o netlink.o nlmsgtab.o netif.o
+selinux-y := avc.o hooks.o selinuxfs.o netlink.o nlmsgtab.o netif.o exports.o
 
 selinux-$(CONFIG_SECURITY_NETWORK_XFRM) += xfrm.o
 
diff --git a/security/selinux/avc.c b/security/selinux/avc.c
index ac5d69bb3377..a300702da527 100644
--- a/security/selinux/avc.c
+++ b/security/selinux/avc.c
@@ -800,7 +800,7 @@ out:
 int avc_ss_reset(u32 seqno)
 {
 	struct avc_callback_node *c;
-	int i, rc = 0;
+	int i, rc = 0, tmprc;
 	unsigned long flag;
 	struct avc_node *node;
 
@@ -813,15 +813,16 @@ int avc_ss_reset(u32 seqno)
 
 	for (c = avc_callbacks; c; c = c->next) {
 		if (c->events & AVC_CALLBACK_RESET) {
-			rc = c->callback(AVC_CALLBACK_RESET,
-					 0, 0, 0, 0, NULL);
-			if (rc)
-				goto out;
+			tmprc = c->callback(AVC_CALLBACK_RESET,
+			                    0, 0, 0, 0, NULL);
+			/* save the first error encountered for the return
+			   value and continue processing the callbacks */
+			if (!rc)
+				rc = tmprc;
 		}
 	}
 
 	avc_latest_notif_update(seqno, 0);
-out:
 	return rc;
 }
 
diff --git a/security/selinux/exports.c b/security/selinux/exports.c
new file mode 100644
index 000000000000..ae4c73eb3085
--- /dev/null
+++ b/security/selinux/exports.c
@@ -0,0 +1,74 @@
+/*
+ * SELinux services exported to the rest of the kernel.
+ *
+ * Author: James Morris <jmorris@redhat.com>
+ *
+ * Copyright (C) 2005 Red Hat, Inc., James Morris <jmorris@redhat.com>
+ * Copyright (C) 2006 Trusted Computer Solutions, Inc. <dgoeddel@trustedcs.com>
+ * Copyright (C) 2006 IBM Corporation, Timothy R. Chavez <tinytim@us.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2,
+ * as published by the Free Software Foundation.
+ */
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/selinux.h>
+#include <linux/fs.h>
+#include <linux/ipc.h>
+
+#include "security.h"
+#include "objsec.h"
+
+void selinux_task_ctxid(struct task_struct *tsk, u32 *ctxid)
+{
+	struct task_security_struct *tsec = tsk->security;
+	if (selinux_enabled)
+		*ctxid = tsec->sid;
+	else
+		*ctxid = 0;
+}
+
+int selinux_ctxid_to_string(u32 ctxid, char **ctx, u32 *ctxlen)
+{
+	if (selinux_enabled)
+		return security_sid_to_context(ctxid, ctx, ctxlen);
+	else {
+		*ctx = NULL;
+		*ctxlen = 0;
+	}
+
+	return 0;
+}
+
+void selinux_get_inode_sid(const struct inode *inode, u32 *sid)
+{
+	if (selinux_enabled) {
+		struct inode_security_struct *isec = inode->i_security;
+		*sid = isec->sid;
+		return;
+	}
+	*sid = 0;
+}
+
+void selinux_get_ipc_sid(const struct kern_ipc_perm *ipcp, u32 *sid)
+{
+	if (selinux_enabled) {
+		struct ipc_security_struct *isec = ipcp->security;
+		*sid = isec->sid;
+		return;
+	}
+	*sid = 0;
+}
+
+void selinux_get_task_sid(struct task_struct *tsk, u32 *sid)
+{
+	if (selinux_enabled) {
+		struct task_security_struct *tsec = tsk->security;
+		*sid = tsec->sid;
+		return;
+	}
+	*sid = 0;
+}
+
diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c
index b61b9554bc27..90b4cdc0c948 100644
--- a/security/selinux/hooks.c
+++ b/security/selinux/hooks.c
@@ -101,6 +101,8 @@ static int __init selinux_enabled_setup(char *str)
 	return 1;
 }
 __setup("selinux=", selinux_enabled_setup);
+#else
+int selinux_enabled = 1;
 #endif
 
 /* Original (dummy) security module. */
@@ -3229,7 +3231,7 @@ static int selinux_socket_sock_rcv_skb(struct sock *sk, struct sk_buff *skb)
 		goto out;
 
 	/* Handle mapped IPv4 packets arriving via IPv6 sockets */
-	if (family == PF_INET6 && skb->protocol == ntohs(ETH_P_IP))
+	if (family == PF_INET6 && skb->protocol == htons(ETH_P_IP))
 		family = PF_INET;
 
  	read_lock_bh(&sk->sk_callback_lock);
@@ -4052,13 +4054,6 @@ static int selinux_ipc_permission(struct kern_ipc_perm *ipcp, short flag)
 	return ipc_has_perm(ipcp, av);
 }
 
-static int selinux_ipc_getsecurity(struct kern_ipc_perm *ipcp, void *buffer, size_t size)
-{
-	struct ipc_security_struct *isec = ipcp->security;
-
-	return selinux_getsecurity(isec->sid, buffer, size);
-}
-
 /* module stacking operations */
 static int selinux_register_security (const char *name, struct security_operations *ops)
 {
@@ -4321,7 +4316,6 @@ static struct security_operations selinux_ops = {
 	.task_to_inode =                selinux_task_to_inode,
 
 	.ipc_permission =		selinux_ipc_permission,
-	.ipc_getsecurity =		selinux_ipc_getsecurity,
 
 	.msg_msg_alloc_security =	selinux_msg_msg_alloc_security,
 	.msg_msg_free_security =	selinux_msg_msg_free_security,
@@ -4428,6 +4422,7 @@ void selinux_complete_init(void)
 
 	/* Set up any superblocks initialized prior to the policy load. */
 	printk(KERN_INFO "SELinux:  Setting up existing superblocks.\n");
+	spin_lock(&sb_lock);
 	spin_lock(&sb_security_lock);
 next_sb:
 	if (!list_empty(&superblock_security_head)) {
@@ -4436,19 +4431,20 @@ next_sb:
 				           struct superblock_security_struct,
 				           list);
 		struct super_block *sb = sbsec->sb;
-		spin_lock(&sb_lock);
 		sb->s_count++;
-		spin_unlock(&sb_lock);
 		spin_unlock(&sb_security_lock);
+		spin_unlock(&sb_lock);
 		down_read(&sb->s_umount);
 		if (sb->s_root)
 			superblock_doinit(sb, NULL);
 		drop_super(sb);
+		spin_lock(&sb_lock);
 		spin_lock(&sb_security_lock);
 		list_del_init(&sbsec->list);
 		goto next_sb;
 	}
 	spin_unlock(&sb_security_lock);
+	spin_unlock(&sb_lock);
 }
 
 /* SELinux requires early initialization in order to label
@@ -4543,6 +4539,7 @@ int selinux_disable(void)
 	printk(KERN_INFO "SELinux:  Disabled at runtime.\n");
 
 	selinux_disabled = 1;
+	selinux_enabled = 0;
 
 	/* Reset security_ops to the secondary module, dummy or capability. */
 	security_ops = secondary_ops;
diff --git a/security/selinux/include/security.h b/security/selinux/include/security.h
index 5f016c98056f..063af47bb231 100644
--- a/security/selinux/include/security.h
+++ b/security/selinux/include/security.h
@@ -29,12 +29,7 @@
 #define POLICYDB_VERSION_MIN   POLICYDB_VERSION_BASE
 #define POLICYDB_VERSION_MAX   POLICYDB_VERSION_AVTAB
 
-#ifdef CONFIG_SECURITY_SELINUX_BOOTPARAM
 extern int selinux_enabled;
-#else
-#define selinux_enabled 1
-#endif
-
 extern int selinux_mls_enabled;
 
 int security_load_policy(void * data, size_t len);
diff --git a/security/selinux/ss/mls.c b/security/selinux/ss/mls.c
index 640d0bfdbc68..7bc5b6440f70 100644
--- a/security/selinux/ss/mls.c
+++ b/security/selinux/ss/mls.c
@@ -8,7 +8,7 @@
  *
  *	Support for enhanced MLS infrastructure.
  *
- * Copyright (C) 2004-2005 Trusted Computer Solutions, Inc.
+ * Copyright (C) 2004-2006 Trusted Computer Solutions, Inc.
  */
 
 #include <linux/kernel.h>
@@ -264,7 +264,7 @@ int mls_context_to_sid(char oldc,
 
 	if (!selinux_mls_enabled) {
 		if (def_sid != SECSID_NULL && oldc)
-			*scontext += strlen(*scontext);
+			*scontext += strlen(*scontext)+1;
 		return 0;
 	}
 
@@ -385,6 +385,34 @@ out:
 }
 
 /*
+ * Set the MLS fields in the security context structure
+ * `context' based on the string representation in
+ * the string `str'.  This function will allocate temporary memory with the
+ * given constraints of gfp_mask.
+ */
+int mls_from_string(char *str, struct context *context, gfp_t gfp_mask)
+{
+	char *tmpstr, *freestr;
+	int rc;
+
+	if (!selinux_mls_enabled)
+		return -EINVAL;
+
+	/* we need freestr because mls_context_to_sid will change
+	   the value of tmpstr */
+	tmpstr = freestr = kstrdup(str, gfp_mask);
+	if (!tmpstr) {
+		rc = -ENOMEM;
+	} else {
+		rc = mls_context_to_sid(':', &tmpstr, context,
+		                        NULL, SECSID_NULL);
+		kfree(freestr);
+	}
+
+	return rc;
+}
+
+/*
  * Copies the effective MLS range from `src' into `dst'.
  */
 static inline int mls_scopy_context(struct context *dst,
diff --git a/security/selinux/ss/mls.h b/security/selinux/ss/mls.h
index 03de697c8058..fbb42f07dd7c 100644
--- a/security/selinux/ss/mls.h
+++ b/security/selinux/ss/mls.h
@@ -8,7 +8,7 @@
  *
  *	Support for enhanced MLS infrastructure.
  *
- * Copyright (C) 2004-2005 Trusted Computer Solutions, Inc.
+ * Copyright (C) 2004-2006 Trusted Computer Solutions, Inc.
  */
 
 #ifndef _SS_MLS_H_
@@ -27,6 +27,8 @@ int mls_context_to_sid(char oldc,
 		       struct sidtab *s,
 		       u32 def_sid);
 
+int mls_from_string(char *str, struct context *context, gfp_t gfp_mask);
+
 int mls_convert_context(struct policydb *oldp,
 			struct policydb *newp,
 			struct context *context);
diff --git a/security/selinux/ss/services.c b/security/selinux/ss/services.c
index 61492485de84..c284dbb8b8c0 100644
--- a/security/selinux/ss/services.c
+++ b/security/selinux/ss/services.c
@@ -7,12 +7,13 @@
  * Updated: Trusted Computer Solutions, Inc. <dgoeddel@trustedcs.com>
  *
  *	Support for enhanced MLS infrastructure.
+ *	Support for context based audit filters.
  *
  * Updated: Frank Mayer <mayerf@tresys.com> and Karl MacMillan <kmacmillan@tresys.com>
  *
  * 	Added conditional policy language extensions
  *
- * Copyright (C) 2004-2005 Trusted Computer Solutions, Inc.
+ * Copyright (C) 2004-2006 Trusted Computer Solutions, Inc.
  * Copyright (C) 2003 - 2004 Tresys Technology, LLC
  * Copyright (C) 2003 Red Hat, Inc., James Morris <jmorris@redhat.com>
  *	This program is free software; you can redistribute it and/or modify
@@ -593,6 +594,10 @@ int security_sid_to_context(u32 sid, char **scontext, u32 *scontext_len)
 
 			*scontext_len = strlen(initial_sid_to_string[sid]) + 1;
 			scontextp = kmalloc(*scontext_len,GFP_ATOMIC);
+			if (!scontextp) {
+				rc = -ENOMEM;
+				goto out;
+			}
 			strcpy(scontextp, initial_sid_to_string[sid]);
 			*scontext = scontextp;
 			goto out;
@@ -1811,3 +1816,235 @@ out:
 	POLICY_RDUNLOCK;
 	return rc;
 }
+
+struct selinux_audit_rule {
+	u32 au_seqno;
+	struct context au_ctxt;
+};
+
+void selinux_audit_rule_free(struct selinux_audit_rule *rule)
+{
+	if (rule) {
+		context_destroy(&rule->au_ctxt);
+		kfree(rule);
+	}
+}
+
+int selinux_audit_rule_init(u32 field, u32 op, char *rulestr,
+                            struct selinux_audit_rule **rule)
+{
+	struct selinux_audit_rule *tmprule;
+	struct role_datum *roledatum;
+	struct type_datum *typedatum;
+	struct user_datum *userdatum;
+	int rc = 0;
+
+	*rule = NULL;
+
+	if (!ss_initialized)
+		return -ENOTSUPP;
+
+	switch (field) {
+	case AUDIT_SE_USER:
+	case AUDIT_SE_ROLE:
+	case AUDIT_SE_TYPE:
+		/* only 'equals' and 'not equals' fit user, role, and type */
+		if (op != AUDIT_EQUAL && op != AUDIT_NOT_EQUAL)
+			return -EINVAL;
+		break;
+	case AUDIT_SE_SEN:
+	case AUDIT_SE_CLR:
+		/* we do not allow a range, indicated by the presense of '-' */
+		if (strchr(rulestr, '-'))
+			return -EINVAL;
+		break;
+	default:
+		/* only the above fields are valid */
+		return -EINVAL;
+	}
+
+	tmprule = kzalloc(sizeof(struct selinux_audit_rule), GFP_KERNEL);
+	if (!tmprule)
+		return -ENOMEM;
+
+	context_init(&tmprule->au_ctxt);
+
+	POLICY_RDLOCK;
+
+	tmprule->au_seqno = latest_granting;
+
+	switch (field) {
+	case AUDIT_SE_USER:
+		userdatum = hashtab_search(policydb.p_users.table, rulestr);
+		if (!userdatum)
+			rc = -EINVAL;
+		else
+			tmprule->au_ctxt.user = userdatum->value;
+		break;
+	case AUDIT_SE_ROLE:
+		roledatum = hashtab_search(policydb.p_roles.table, rulestr);
+		if (!roledatum)
+			rc = -EINVAL;
+		else
+			tmprule->au_ctxt.role = roledatum->value;
+		break;
+	case AUDIT_SE_TYPE:
+		typedatum = hashtab_search(policydb.p_types.table, rulestr);
+		if (!typedatum)
+			rc = -EINVAL;
+		else
+			tmprule->au_ctxt.type = typedatum->value;
+		break;
+	case AUDIT_SE_SEN:
+	case AUDIT_SE_CLR:
+		rc = mls_from_string(rulestr, &tmprule->au_ctxt, GFP_ATOMIC);
+		break;
+	}
+
+	POLICY_RDUNLOCK;
+
+	if (rc) {
+		selinux_audit_rule_free(tmprule);
+		tmprule = NULL;
+	}
+
+	*rule = tmprule;
+
+	return rc;
+}
+
+int selinux_audit_rule_match(u32 ctxid, u32 field, u32 op,
+                             struct selinux_audit_rule *rule,
+                             struct audit_context *actx)
+{
+	struct context *ctxt;
+	struct mls_level *level;
+	int match = 0;
+
+	if (!rule) {
+		audit_log(actx, GFP_ATOMIC, AUDIT_SELINUX_ERR,
+		          "selinux_audit_rule_match: missing rule\n");
+		return -ENOENT;
+	}
+
+	POLICY_RDLOCK;
+
+	if (rule->au_seqno < latest_granting) {
+		audit_log(actx, GFP_ATOMIC, AUDIT_SELINUX_ERR,
+		          "selinux_audit_rule_match: stale rule\n");
+		match = -ESTALE;
+		goto out;
+	}
+
+	ctxt = sidtab_search(&sidtab, ctxid);
+	if (!ctxt) {
+		audit_log(actx, GFP_ATOMIC, AUDIT_SELINUX_ERR,
+		          "selinux_audit_rule_match: unrecognized SID %d\n",
+		          ctxid);
+		match = -ENOENT;
+		goto out;
+	}
+
+	/* a field/op pair that is not caught here will simply fall through
+	   without a match */
+	switch (field) {
+	case AUDIT_SE_USER:
+		switch (op) {
+		case AUDIT_EQUAL:
+			match = (ctxt->user == rule->au_ctxt.user);
+			break;
+		case AUDIT_NOT_EQUAL:
+			match = (ctxt->user != rule->au_ctxt.user);
+			break;
+		}
+		break;
+	case AUDIT_SE_ROLE:
+		switch (op) {
+		case AUDIT_EQUAL:
+			match = (ctxt->role == rule->au_ctxt.role);
+			break;
+		case AUDIT_NOT_EQUAL:
+			match = (ctxt->role != rule->au_ctxt.role);
+			break;
+		}
+		break;
+	case AUDIT_SE_TYPE:
+		switch (op) {
+		case AUDIT_EQUAL:
+			match = (ctxt->type == rule->au_ctxt.type);
+			break;
+		case AUDIT_NOT_EQUAL:
+			match = (ctxt->type != rule->au_ctxt.type);
+			break;
+		}
+		break;
+	case AUDIT_SE_SEN:
+	case AUDIT_SE_CLR:
+		level = (op == AUDIT_SE_SEN ?
+		         &ctxt->range.level[0] : &ctxt->range.level[1]);
+		switch (op) {
+		case AUDIT_EQUAL:
+			match = mls_level_eq(&rule->au_ctxt.range.level[0],
+			                     level);
+			break;
+		case AUDIT_NOT_EQUAL:
+			match = !mls_level_eq(&rule->au_ctxt.range.level[0],
+			                      level);
+			break;
+		case AUDIT_LESS_THAN:
+			match = (mls_level_dom(&rule->au_ctxt.range.level[0],
+			                       level) &&
+			         !mls_level_eq(&rule->au_ctxt.range.level[0],
+			                       level));
+			break;
+		case AUDIT_LESS_THAN_OR_EQUAL:
+			match = mls_level_dom(&rule->au_ctxt.range.level[0],
+			                      level);
+			break;
+		case AUDIT_GREATER_THAN:
+			match = (mls_level_dom(level,
+			                      &rule->au_ctxt.range.level[0]) &&
+			         !mls_level_eq(level,
+			                       &rule->au_ctxt.range.level[0]));
+			break;
+		case AUDIT_GREATER_THAN_OR_EQUAL:
+			match = mls_level_dom(level,
+			                      &rule->au_ctxt.range.level[0]);
+			break;
+		}
+	}
+
+out:
+	POLICY_RDUNLOCK;
+	return match;
+}
+
+static int (*aurule_callback)(void) = NULL;
+
+static int aurule_avc_callback(u32 event, u32 ssid, u32 tsid,
+                               u16 class, u32 perms, u32 *retained)
+{
+	int err = 0;
+
+	if (event == AVC_CALLBACK_RESET && aurule_callback)
+		err = aurule_callback();
+	return err;
+}
+
+static int __init aurule_init(void)
+{
+	int err;
+
+	err = avc_add_callback(aurule_avc_callback, AVC_CALLBACK_RESET,
+	                       SECSID_NULL, SECSID_NULL, SECCLASS_NULL, 0);
+	if (err)
+		panic("avc_add_callback() failed, error %d\n", err);
+
+	return err;
+}
+__initcall(aurule_init);
+
+void selinux_audit_set_callback(int (*callback)(void))
+{
+	aurule_callback = callback;
+}
diff --git a/sound/core/Kconfig b/sound/core/Kconfig
index 8efc1b12f3a8..4262a1c87731 100644
--- a/sound/core/Kconfig
+++ b/sound/core/Kconfig
@@ -142,7 +142,7 @@ config SND_SUPPORT_OLD_API
 
 config SND_VERBOSE_PROCFS
 	bool "Verbose procfs contents"
-	depends on SND
+	depends on SND && PROC_FS
 	default y
 	help
 	  Say Y here to include code for verbose procfs contents (provides
@@ -171,3 +171,13 @@ config SND_DEBUG_DETECT
 	help
 	  Say Y here to enable extra-verbose log messages printed when
 	  detecting devices.
+
+config SND_PCM_XRUN_DEBUG
+	bool "Enable PCM ring buffer overrun/underrun debugging"
+	default n
+	depends on SND_DEBUG && SND_VERBOSE_PROCFS
+	help
+	  Say Y to enable the PCM ring buffer overrun/underrun debugging.
+	  It is usually not required, but if you have trouble with
+	  sound clicking when system is loaded, it may help to determine
+	  the process or driver which causes the scheduling gaps.
diff --git a/sound/core/oss/pcm_oss.c b/sound/core/oss/pcm_oss.c
index c5978d6c6080..ac990bf0b48f 100644
--- a/sound/core/oss/pcm_oss.c
+++ b/sound/core/oss/pcm_oss.c
@@ -1242,6 +1242,8 @@ static int snd_pcm_oss_set_format(struct snd_pcm_oss_file *pcm_oss_file, int for
 	
 	if (format != AFMT_QUERY) {
 		formats = snd_pcm_oss_get_formats(pcm_oss_file);
+		if (formats < 0)
+			return formats;
 		if (!(formats & format))
 			format = AFMT_U8;
 		for (idx = 1; idx >= 0; --idx) {
@@ -2212,7 +2214,7 @@ static int snd_pcm_oss_mmap(struct file *file, struct vm_area_struct *area)
 	return 0;
 }
 
-#ifdef CONFIG_PROC_FS
+#ifdef CONFIG_SND_VERBOSE_PROCFS
 /*
  *  /proc interface
  */
@@ -2366,10 +2368,10 @@ static void snd_pcm_oss_proc_done(struct snd_pcm *pcm)
 		}
 	}
 }
-#else /* !CONFIG_PROC_FS */
+#else /* !CONFIG_SND_VERBOSE_PROCFS */
 #define snd_pcm_oss_proc_init(pcm)
 #define snd_pcm_oss_proc_done(pcm)
-#endif /* CONFIG_PROC_FS */
+#endif /* CONFIG_SND_VERBOSE_PROCFS */
 
 /*
  *  ENTRY functions
diff --git a/sound/core/pcm.c b/sound/core/pcm.c
index 122e10a61ab9..84b00038236d 100644
--- a/sound/core/pcm.c
+++ b/sound/core/pcm.c
@@ -142,7 +142,7 @@ static int snd_pcm_control_ioctl(struct snd_card *card,
 	return -ENOIOCTLCMD;
 }
 
-#if defined(CONFIG_PROC_FS) && defined(CONFIG_SND_VERBOSE_PROCFS)
+#ifdef CONFIG_SND_VERBOSE_PROCFS
 
 #define STATE(v) [SNDRV_PCM_STATE_##v] = #v
 #define STREAM(v) [SNDRV_PCM_STREAM_##v] = #v
@@ -436,7 +436,7 @@ static void snd_pcm_substream_proc_status_read(struct snd_info_entry *entry,
 	snd_iprintf(buffer, "appl_ptr    : %ld\n", runtime->control->appl_ptr);
 }
 
-#ifdef CONFIG_SND_DEBUG
+#ifdef CONFIG_SND_PCM_XRUN_DEBUG
 static void snd_pcm_xrun_debug_read(struct snd_info_entry *entry,
 				    struct snd_info_buffer *buffer)
 {
@@ -480,7 +480,7 @@ static int snd_pcm_stream_proc_init(struct snd_pcm_str *pstr)
 	}
 	pstr->proc_info_entry = entry;
 
-#ifdef CONFIG_SND_DEBUG
+#ifdef CONFIG_SND_PCM_XRUN_DEBUG
 	if ((entry = snd_info_create_card_entry(pcm->card, "xrun_debug",
 						pstr->proc_root)) != NULL) {
 		entry->c.text.read_size = 64;
@@ -501,7 +501,7 @@ static int snd_pcm_stream_proc_init(struct snd_pcm_str *pstr)
 
 static int snd_pcm_stream_proc_done(struct snd_pcm_str *pstr)
 {
-#ifdef CONFIG_SND_DEBUG
+#ifdef CONFIG_SND_PCM_XRUN_DEBUG
 	if (pstr->proc_xrun_debug_entry) {
 		snd_info_unregister(pstr->proc_xrun_debug_entry);
 		pstr->proc_xrun_debug_entry = NULL;
@@ -599,12 +599,12 @@ static int snd_pcm_substream_proc_done(struct snd_pcm_substream *substream)
 	}
 	return 0;
 }
-#else /* !CONFIG_PROC_FS */
+#else /* !CONFIG_SND_VERBOSE_PROCFS */
 static inline int snd_pcm_stream_proc_init(struct snd_pcm_str *pstr) { return 0; }
 static inline int snd_pcm_stream_proc_done(struct snd_pcm_str *pstr) { return 0; }
 static inline int snd_pcm_substream_proc_init(struct snd_pcm_substream *substream) { return 0; }
 static inline int snd_pcm_substream_proc_done(struct snd_pcm_substream *substream) { return 0; }
-#endif /* CONFIG_PROC_FS */
+#endif /* CONFIG_SND_VERBOSE_PROCFS */
 
 /**
  * snd_pcm_new_stream - create a new PCM stream
diff --git a/sound/core/pcm_lib.c b/sound/core/pcm_lib.c
index 230a940d00bd..eedc6cb038bb 100644
--- a/sound/core/pcm_lib.c
+++ b/sound/core/pcm_lib.c
@@ -130,7 +130,7 @@ void snd_pcm_playback_silence(struct snd_pcm_substream *substream, snd_pcm_ufram
 static void xrun(struct snd_pcm_substream *substream)
 {
 	snd_pcm_stop(substream, SNDRV_PCM_STATE_XRUN);
-#ifdef CONFIG_SND_DEBUG
+#ifdef CONFIG_SND_PCM_XRUN_DEBUG
 	if (substream->pstr->xrun_debug) {
 		snd_printd(KERN_DEBUG "XRUN: pcmC%dD%d%c\n",
 			   substream->pcm->card->number,
@@ -204,7 +204,7 @@ static inline int snd_pcm_update_hw_ptr_interrupt(struct snd_pcm_substream *subs
 	delta = hw_ptr_interrupt - new_hw_ptr;
 	if (delta > 0) {
 		if ((snd_pcm_uframes_t)delta < runtime->buffer_size / 2) {
-#ifdef CONFIG_SND_DEBUG
+#ifdef CONFIG_SND_PCM_XRUN_DEBUG
 			if (runtime->periods > 1 && substream->pstr->xrun_debug) {
 				snd_printd(KERN_ERR "Unexpected hw_pointer value [1] (stream = %i, delta: -%ld, max jitter = %ld): wrong interrupt acknowledge?\n", substream->stream, (long) delta, runtime->buffer_size / 2);
 				if (substream->pstr->xrun_debug > 1)
@@ -249,7 +249,7 @@ int snd_pcm_update_hw_ptr(struct snd_pcm_substream *substream)
 	delta = old_hw_ptr - new_hw_ptr;
 	if (delta > 0) {
 		if ((snd_pcm_uframes_t)delta < runtime->buffer_size / 2) {
-#ifdef CONFIG_SND_DEBUG
+#ifdef CONFIG_SND_PCM_XRUN_DEBUG
 			if (runtime->periods > 2 && substream->pstr->xrun_debug) {
 				snd_printd(KERN_ERR "Unexpected hw_pointer value [2] (stream = %i, delta: -%ld, max jitter = %ld): wrong interrupt acknowledge?\n", substream->stream, (long) delta, runtime->buffer_size / 2);
 				if (substream->pstr->xrun_debug > 1)
diff --git a/sound/core/pcm_memory.c b/sound/core/pcm_memory.c
index a0119ae67dcd..428f8c169ee1 100644
--- a/sound/core/pcm_memory.c
+++ b/sound/core/pcm_memory.c
@@ -100,8 +100,10 @@ static void snd_pcm_lib_preallocate_dma_free(struct snd_pcm_substream *substream
 int snd_pcm_lib_preallocate_free(struct snd_pcm_substream *substream)
 {
 	snd_pcm_lib_preallocate_dma_free(substream);
+#ifdef CONFIG_SND_VERBOSE_PROCFS
 	snd_info_unregister(substream->proc_prealloc_entry);
 	substream->proc_prealloc_entry = NULL;
+#endif
 	return 0;
 }
 
@@ -124,7 +126,7 @@ int snd_pcm_lib_preallocate_free_for_all(struct snd_pcm *pcm)
 	return 0;
 }
 
-#ifdef CONFIG_PROC_FS
+#ifdef CONFIG_SND_VERBOSE_PROCFS
 /*
  * read callback for prealloc proc file
  *
@@ -203,9 +205,9 @@ static inline void preallocate_info_init(struct snd_pcm_substream *substream)
 	substream->proc_prealloc_entry = entry;
 }
 
-#else /* !CONFIG_PROC_FS */
+#else /* !CONFIG_SND_VERBOSE_PROCFS */
 #define preallocate_info_init(s)
-#endif
+#endif /* CONFIG_SND_VERBOSE_PROCFS */
 
 /*
  * pre-allocate the buffer and create a proc file for the substream
diff --git a/sound/drivers/dummy.c b/sound/drivers/dummy.c
index e35fd5779a9d..ae0df549fac7 100644
--- a/sound/drivers/dummy.c
+++ b/sound/drivers/dummy.c
@@ -675,10 +675,8 @@ static int __init alsa_card_dummy_init(void)
 			continue;
 		device = platform_device_register_simple(SND_DUMMY_DRIVER,
 							 i, NULL, 0);
-		if (IS_ERR(device)) {
-			err = PTR_ERR(device);
-			goto errout;
-		}
+		if (IS_ERR(device))
+			continue;
 		devices[i] = device;
 		cards++;
 	}
@@ -686,14 +684,10 @@ static int __init alsa_card_dummy_init(void)
 #ifdef MODULE
 		printk(KERN_ERR "Dummy soundcard not found or device busy\n");
 #endif
-		err = -ENODEV;
-		goto errout;
+		snd_dummy_unregister_all();
+		return -ENODEV;
 	}
 	return 0;
-
- errout:
-	snd_dummy_unregister_all();
-	return err;
 }
 
 static void __exit alsa_card_dummy_exit(void)
diff --git a/sound/drivers/mpu401/mpu401.c b/sound/drivers/mpu401/mpu401.c
index 9ea3059a7064..77b06009735d 100644
--- a/sound/drivers/mpu401/mpu401.c
+++ b/sound/drivers/mpu401/mpu401.c
@@ -151,7 +151,7 @@ static struct pnp_device_id snd_mpu401_pnpids[] = {
 
 MODULE_DEVICE_TABLE(pnp, snd_mpu401_pnpids);
 
-static int __init snd_mpu401_pnp(int dev, struct pnp_dev *device,
+static int __devinit snd_mpu401_pnp(int dev, struct pnp_dev *device,
 				 const struct pnp_device_id *id)
 {
 	if (!pnp_port_valid(device, 0) ||
@@ -251,10 +251,8 @@ static int __init alsa_card_mpu401_init(void)
 #endif
 		device = platform_device_register_simple(SND_MPU401_DRIVER,
 							 i, NULL, 0);
-		if (IS_ERR(device)) {
-			err = PTR_ERR(device);
-			goto errout;
-		}
+		if (IS_ERR(device))
+			continue;
 		platform_devices[i] = device;
 		snd_mpu401_devices++;
 	}
@@ -266,14 +264,10 @@ static int __init alsa_card_mpu401_init(void)
 #ifdef MODULE
 		printk(KERN_ERR "MPU-401 device not found or device busy\n");
 #endif
-		err = -ENODEV;
-		goto errout;
+		snd_mpu401_unregister_all();
+		return -ENODEV;
 	}
 	return 0;
-
- errout:
-	snd_mpu401_unregister_all();
-	return err;
 }
 
 static void __exit alsa_card_mpu401_exit(void)
diff --git a/sound/drivers/mpu401/mpu401_uart.c b/sound/drivers/mpu401/mpu401_uart.c
index 8687ae3c66b8..b49a45cbf67a 100644
--- a/sound/drivers/mpu401/mpu401_uart.c
+++ b/sound/drivers/mpu401/mpu401_uart.c
@@ -183,7 +183,8 @@ static void snd_mpu401_uart_remove_timer (struct snd_mpu401 *mpu, int input)
 
  */
 
-static void snd_mpu401_uart_cmd(struct snd_mpu401 * mpu, unsigned char cmd, int ack)
+static int snd_mpu401_uart_cmd(struct snd_mpu401 * mpu, unsigned char cmd,
+		int ack)
 {
 	unsigned long flags;
 	int timeout, ok;
@@ -218,9 +219,11 @@ static void snd_mpu401_uart_cmd(struct snd_mpu401 * mpu, unsigned char cmd, int
 		ok = 1;
 	}
 	spin_unlock_irqrestore(&mpu->input_lock, flags);
-	if (! ok)
+	if (!ok) {
 		snd_printk("cmd: 0x%x failed at 0x%lx (status = 0x%x, data = 0x%x)\n", cmd, mpu->port, mpu->read(mpu, MPU401C(mpu)), mpu->read(mpu, MPU401D(mpu)));
-	// snd_printk("cmd: 0x%x at 0x%lx (status = 0x%x, data = 0x%x)\n", cmd, mpu->port, mpu->read(mpu, MPU401C(mpu)), mpu->read(mpu, MPU401D(mpu)));
+		return 1;
+	}
+	return 0;
 }
 
 /*
@@ -235,12 +238,19 @@ static int snd_mpu401_uart_input_open(struct snd_rawmidi_substream *substream)
 	if (mpu->open_input && (err = mpu->open_input(mpu)) < 0)
 		return err;
 	if (! test_bit(MPU401_MODE_BIT_OUTPUT, &mpu->mode)) {
-		snd_mpu401_uart_cmd(mpu, MPU401_RESET, 1);
-		snd_mpu401_uart_cmd(mpu, MPU401_ENTER_UART, 1);
+		if (snd_mpu401_uart_cmd(mpu, MPU401_RESET, 1))
+			goto error_out;
+		if (snd_mpu401_uart_cmd(mpu, MPU401_ENTER_UART, 1))
+			goto error_out;
 	}
 	mpu->substream_input = substream;
 	set_bit(MPU401_MODE_BIT_INPUT, &mpu->mode);
 	return 0;
+
+error_out:
+	if (mpu->open_input && mpu->close_input)
+		mpu->close_input(mpu);
+	return -EIO;
 }
 
 static int snd_mpu401_uart_output_open(struct snd_rawmidi_substream *substream)
@@ -252,39 +262,52 @@ static int snd_mpu401_uart_output_open(struct snd_rawmidi_substream *substream)
 	if (mpu->open_output && (err = mpu->open_output(mpu)) < 0)
 		return err;
 	if (! test_bit(MPU401_MODE_BIT_INPUT, &mpu->mode)) {
-		snd_mpu401_uart_cmd(mpu, MPU401_RESET, 1);
-		snd_mpu401_uart_cmd(mpu, MPU401_ENTER_UART, 1);
+		if (snd_mpu401_uart_cmd(mpu, MPU401_RESET, 1))
+			goto error_out;
+		if (snd_mpu401_uart_cmd(mpu, MPU401_ENTER_UART, 1))
+			goto error_out;
 	}
 	mpu->substream_output = substream;
 	set_bit(MPU401_MODE_BIT_OUTPUT, &mpu->mode);
 	return 0;
+
+error_out:
+	if (mpu->open_output && mpu->close_output)
+		mpu->close_output(mpu);
+	return -EIO;
 }
 
 static int snd_mpu401_uart_input_close(struct snd_rawmidi_substream *substream)
 {
 	struct snd_mpu401 *mpu;
+	int err = 0;
 
 	mpu = substream->rmidi->private_data;
 	clear_bit(MPU401_MODE_BIT_INPUT, &mpu->mode);
 	mpu->substream_input = NULL;
 	if (! test_bit(MPU401_MODE_BIT_OUTPUT, &mpu->mode))
-		snd_mpu401_uart_cmd(mpu, MPU401_RESET, 0);
+		err = snd_mpu401_uart_cmd(mpu, MPU401_RESET, 0);
 	if (mpu->close_input)
 		mpu->close_input(mpu);
+	if (err)
+		return -EIO;
 	return 0;
 }
 
 static int snd_mpu401_uart_output_close(struct snd_rawmidi_substream *substream)
 {
 	struct snd_mpu401 *mpu;
+	int err = 0;
 
 	mpu = substream->rmidi->private_data;
 	clear_bit(MPU401_MODE_BIT_OUTPUT, &mpu->mode);
 	mpu->substream_output = NULL;
 	if (! test_bit(MPU401_MODE_BIT_INPUT, &mpu->mode))
-		snd_mpu401_uart_cmd(mpu, MPU401_RESET, 0);
+		err = snd_mpu401_uart_cmd(mpu, MPU401_RESET, 0);
 	if (mpu->close_output)
 		mpu->close_output(mpu);
+	if (err)
+		return -EIO;
 	return 0;
 }
 
@@ -316,6 +339,7 @@ static void snd_mpu401_uart_input_trigger(struct snd_rawmidi_substream *substrea
 			snd_mpu401_uart_remove_timer(mpu, 1);
 		clear_bit(MPU401_MODE_BIT_INPUT_TRIGGER, &mpu->mode);
 	}
+
 }
 
 /*
diff --git a/sound/drivers/serial-u16550.c b/sound/drivers/serial-u16550.c
index 1a7fbefe4740..c01b4c5118b9 100644
--- a/sound/drivers/serial-u16550.c
+++ b/sound/drivers/serial-u16550.c
@@ -996,10 +996,8 @@ static int __init alsa_card_serial_init(void)
 			continue;
 		device = platform_device_register_simple(SND_SERIAL_DRIVER,
 							 i, NULL, 0);
-		if (IS_ERR(device)) {
-			err = PTR_ERR(device);
-			goto errout;
-		}
+		if (IS_ERR(device))
+			continue;
 		devices[i] = device;
 		cards++;
 	}
@@ -1007,14 +1005,10 @@ static int __init alsa_card_serial_init(void)
 #ifdef MODULE
 		printk(KERN_ERR "serial midi soundcard not found or device busy\n");
 #endif
-		err = -ENODEV;
-		goto errout;
+		snd_serial_unregister_all();
+		return -ENODEV;
 	}
 	return 0;
-
- errout:
-	snd_serial_unregister_all();
-	return err;
 }
 
 static void __exit alsa_card_serial_exit(void)
diff --git a/sound/drivers/virmidi.c b/sound/drivers/virmidi.c
index a3ee306239c9..26eb2499d442 100644
--- a/sound/drivers/virmidi.c
+++ b/sound/drivers/virmidi.c
@@ -169,10 +169,8 @@ static int __init alsa_card_virmidi_init(void)
 			continue;
 		device = platform_device_register_simple(SND_VIRMIDI_DRIVER,
 							 i, NULL, 0);
-		if (IS_ERR(device)) {
-			err = PTR_ERR(device);
-			goto errout;
-		}
+		if (IS_ERR(device))
+			continue;
 		devices[i] = device;
 		cards++;
 	}
@@ -180,14 +178,10 @@ static int __init alsa_card_virmidi_init(void)
 #ifdef MODULE
 		printk(KERN_ERR "Card-VirMIDI soundcard not found or device busy\n");
 #endif
-		err = -ENODEV;
-		goto errout;
+		snd_virmidi_unregister_all();
+		return -ENODEV;
 	}
 	return 0;
-
- errout:
-	snd_virmidi_unregister_all();
-	return err;
 }
 
 static void __exit alsa_card_virmidi_exit(void)
diff --git a/sound/isa/es18xx.c b/sound/isa/es18xx.c
index a36ec1daa5cb..e6945db8ed1b 100644
--- a/sound/isa/es18xx.c
+++ b/sound/isa/es18xx.c
@@ -85,6 +85,8 @@
 #include <linux/pnp.h>
 #include <linux/isapnp.h>
 #include <linux/moduleparam.h>
+#include <linux/delay.h>
+
 #include <asm/io.h>
 #include <asm/dma.h>
 #include <sound/core.h>
diff --git a/sound/isa/opti9xx/miro.c b/sound/isa/opti9xx/miro.c
index 83d64bc07ff0..e6bfcf74c1c1 100644
--- a/sound/isa/opti9xx/miro.c
+++ b/sound/isa/opti9xx/miro.c
@@ -1179,20 +1179,17 @@ static int __init snd_card_miro_aci_detect(struct snd_card *card, struct snd_mir
         /* force ACI into a known state */
 	for (i = 0; i < 3; i++)
 		if (aci_cmd(miro, ACI_ERROR_OP, -1, -1) < 0) {
-			snd_card_free(card);
 			snd_printk(KERN_ERR "can't force aci into known state.\n");
 			return -ENXIO;
 		}
 
 	if ((miro->aci_vendor=aci_cmd(miro, ACI_READ_IDCODE, -1, -1)) < 0 ||
 	    (miro->aci_product=aci_cmd(miro, ACI_READ_IDCODE, -1, -1)) < 0) {
-		snd_card_free(card);
 		snd_printk(KERN_ERR "can't read aci id on 0x%lx.\n", miro->aci_port);
 		return -ENXIO;
 	}
 
 	if ((miro->aci_version=aci_cmd(miro, ACI_READ_VERSION, -1, -1)) < 0) {
-		snd_card_free(card);
 		snd_printk(KERN_ERR "can't read aci version on 0x%lx.\n", 
 			   miro->aci_port);
 		return -ENXIO;
diff --git a/sound/oss/Kconfig b/sound/oss/Kconfig
index 88e52dc84c09..558c6ed443be 100644
--- a/sound/oss/Kconfig
+++ b/sound/oss/Kconfig
@@ -5,23 +5,9 @@
 #
 # Prompt user for primary drivers.
 
-config OBSOLETE_OSS_DRIVER
-	bool "Obsolete OSS drivers"
-	depends on SOUND_PRIME
-	help
-	  This option enables support for obsolete OSS drivers that
-	  are scheduled for removal in the near future since there
-	  are ALSA drivers for the same hardware.
-
-	  Please contact Adrian Bunk <bunk@stusta.de> if you had to
-	  say Y here because your soundcard is not properly supported
-	  by ALSA.
-
-	  If unsure, say N.
-
 config SOUND_BT878
 	tristate "BT878 audio dma"
-	depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
+	depends on SOUND_PRIME && PCI
 	---help---
 	  Audio DMA support for bt878 based grabber boards.  As you might have
 	  already noticed, bt878 is listed with two functions in /proc/pci.
@@ -35,48 +21,9 @@ config SOUND_BT878
 	  To compile this driver as a module, choose M here: the module will
 	  be called btaudio.
 
-config SOUND_CMPCI
-	tristate "C-Media PCI (CMI8338/8738)"
-	depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
-	help
-	  Say Y or M if you have a PCI sound card using the CMI8338
-	  or the CMI8738 chipset.  Data on these chips are available at
-	  <http://www.cmedia.com.tw/>.
-
-	  A userspace utility to control some internal registers of these
-	  chips is available at
-	  <http://member.nifty.ne.jp/Breeze/softwares/unix/cmictl-e.html>.
-
-config SOUND_CMPCI_FM
-	bool "Enable legacy FM"
-	depends on SOUND_CMPCI && X86
-	help
-	  Say Y here to enable the legacy FM (frequency-modulation) synthesizer
-	  support on a card using the CMI8338 or CMI8378 chipset. Even it is
-	  enabled, you need to set fmio as proper value to enable it.
-	  Say N here if you don't need this.
-
-config SOUND_CMPCI_MIDI
-	bool "Enable legacy MPU-401"
-	depends on SOUND_CMPCI && X86
-	help
-	  Say Y here to enable the legacy MPU401 MIDI synthesizer support on a
-	  card using the CMI8338 or CMI8378 chipset. Even it is enabled,
-	  you need to set mpuio as proper value to enable it.
-	  Say N here if you don't need this.
-
-config SOUND_CMPCI_JOYSTICK
-	bool "Enable joystick"
-	depends on SOUND_CMPCI && X86 && (GAMEPORT=y || SOUND_CMPCI=GAMEPORT)
-	help
-	  Say Y here in order to enable the joystick port on a sound card using
-	  the CMI8338 or the CMI8738 chipset.  You need to config the
-	  gameport support and set joystick parameter as 1 to use it.
-	  Say N here if you don't need this.
-
 config SOUND_EMU10K1
 	tristate "Creative SBLive! (EMU10K1)"
-	depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
+	depends on SOUND_PRIME && PCI
 	---help---
 	  Say Y or M if you have a PCI sound card using the EMU10K1 chipset,
 	  such as the Creative SBLive!, SB PCI512 or Emu-APS.
@@ -108,13 +55,6 @@ config SOUND_FUSION
 	  series) when wired as native sound drivers with AC97 codecs.  If
 	  this driver does not work try the CS4232 driver.
 
-config SOUND_CS4281
-	tristate "Crystal Sound CS4281"
-	depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
-	help
-	  Picture and feature list at
-	  <http://www.pcbroker.com/crystal4281.html>.
-
 config SOUND_BCM_CS4297A
 	tristate "Crystal Sound CS4297a (for Swarm)"
 	depends on SOUND_PRIME && SIBYTE_SWARM
@@ -125,22 +65,9 @@ config SOUND_BCM_CS4297A
 	  note that CONFIG_KGDB should not be enabled at the same
 	  time, since it also attempts to use this UART port.
 
-config SOUND_ES1370
-	tristate "Ensoniq AudioPCI (ES1370)"
-	depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
-	help
-	  Say Y or M if you have a PCI sound card utilizing the Ensoniq
-	  ES1370 chipset, such as Ensoniq's AudioPCI (non-97). To find
-	  out if your sound card uses an ES1370 without removing your
-	  computer's cover, use lspci -n and look for the PCI ID
-	  1274:5000. Since Ensoniq was bought by Creative Labs,
-	  Sound Blaster 64/PCI models are either ES1370 or ES1371 based.
-	  This driver differs slightly from OSS/Free, so PLEASE READ
-	  <file:Documentation/sound/oss/es1370>.
-
 config SOUND_ES1371
 	tristate "Creative Ensoniq AudioPCI 97 (ES1371)"
-	depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
+	depends on SOUND_PRIME && PCI
 	help
 	  Say Y or M if you have a PCI sound card utilizing the Ensoniq
 	  ES1371 chipset, such as Ensoniq's AudioPCI97. To find out if
@@ -151,33 +78,6 @@ config SOUND_ES1371
 	  slightly from OSS/Free, so PLEASE READ
 	  <file:Documentation/sound/oss/es1371>.
 
-config SOUND_ESSSOLO1
-	tristate "ESS Technology Solo1" 
-	depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
-	help
-	  Say Y or M if you have a PCI sound card utilizing the ESS Technology
-	  Solo1 chip. To find out if your sound card uses a
-	  Solo1 chip without removing your computer's cover, use
-	  lspci -n and look for the PCI ID 125D:1969. This driver
-	  differs slightly from OSS/Free, so PLEASE READ
-	  <file:Documentation/sound/oss/solo1>.
-
-config SOUND_MAESTRO
-	tristate "ESS Maestro, Maestro2, Maestro2E driver"
-	depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
-	help
-	  Say Y or M if you have a sound system driven by ESS's Maestro line
-	  of PCI sound chips.  These include the Maestro 1, Maestro 2, and
-	  Maestro 2E.  See <file:Documentation/sound/oss/Maestro> for more
-	  details.
-
-config SOUND_MAESTRO3
-	tristate "ESS Maestro3/Allegro driver (EXPERIMENTAL)"
-	depends on SOUND_PRIME && PCI && EXPERIMENTAL && OBSOLETE_OSS_DRIVER
-	help
-	  Say Y or M if you have a sound system driven by ESS's Maestro 3
-	  PCI sound chip.
-
 config SOUND_ICH
 	tristate "Intel ICH (i8xx) audio support"
 	depends on SOUND_PRIME && PCI
@@ -185,24 +85,6 @@ config SOUND_ICH
 	  Support for integral audio in Intel's I/O Controller Hub (ICH)
 	  chipset, as used on the 810/820/840 motherboards.
 
-config SOUND_HARMONY
-	tristate "PA Harmony audio driver"
-	depends on GSC_LASI && SOUND_PRIME && OBSOLETE_OSS_DRIVER
-	help
-	  Say 'Y' or 'M' to include support for Harmony soundchip
-	  on HP 712, 715/new and many other GSC based machines.
-
-config SOUND_SONICVIBES
-	tristate "S3 SonicVibes"
-	depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
-	help
-	  Say Y or M if you have a PCI sound card utilizing the S3
-	  SonicVibes chipset. To find out if your sound card uses a
-	  SonicVibes chip without removing your computer's cover, use
-	  lspci -n and look for the PCI ID 5333:CA00. This driver
-	  differs slightly from OSS/Free, so PLEASE READ
-	  <file:Documentation/sound/oss/sonicvibes>.
-
 config SOUND_VWSND
 	tristate "SGI Visual Workstation Sound"
 	depends on SOUND_PRIME && X86_VISWS
@@ -231,10 +113,6 @@ config SOUND_VRC5477
 	  integrated, multi-function controller chip for MIPS CPUs.  Works
 	  with the AC97 codec.
 
-config SOUND_AU1000
-	tristate "Au1000 Sound"
-	depends on SOUND_PRIME && (SOC_AU1000 || SOC_AU1100 || SOC_AU1500) && OBSOLETE_OSS_DRIVER
-
 config SOUND_AU1550_AC97
 	tristate "Au1550 AC97 Sound"
 	depends on SOUND_PRIME && SOC_AU1550
@@ -507,7 +385,7 @@ config MSND_FIFOSIZE
 
 config SOUND_VIA82CXXX
 	tristate "VIA 82C686 Audio Codec"
-	depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
+	depends on SOUND_PRIME && PCI
 	help
 	  Say Y here to include support for the audio codec found on VIA
 	  82Cxxx-based chips. Typically these are built into a motherboard.
@@ -576,18 +454,6 @@ config SOUND_AD1889
 	  Say M here if you have a sound card based on the Analog Devices
 	  AD1889 chip.
 
-config SOUND_SGALAXY
-	tristate "Aztech Sound Galaxy (non-PnP) cards"
-	depends on SOUND_OSS && OBSOLETE_OSS_DRIVER
-	help
-	  This module initializes the older non Plug and Play sound galaxy
-	  cards from Aztech. It supports the Waverider Pro 32 - 3D and the
-	  Galaxy Washington 16.
-
-	  If you compile the driver into the kernel, you have to add
-	  "sgalaxy=<io>,<irq>,<dma>,<dma2>,<sgbase>" to the kernel command
-	  line.
-
 config SOUND_ADLIB
 	tristate "Adlib Cards"
 	depends on SOUND_OSS
@@ -614,7 +480,7 @@ config SOUND_ACI_MIXER
 
 config SOUND_CS4232
 	tristate "Crystal CS4232 based (PnP) cards"
-	depends on SOUND_OSS && OBSOLETE_OSS_DRIVER
+	depends on SOUND_OSS
 	help
 	  Say Y here if you have a card based on the Crystal CS4232 chip set,
 	  which uses its own Plug and Play protocol.
@@ -626,42 +492,6 @@ config SOUND_CS4232
 	  See <file:Documentation/sound/oss/CS4232> for more information on
 	  configuring this card.
 
-config SOUND_SSCAPE
-	tristate "Ensoniq SoundScape support"
-	depends on SOUND_OSS && OBSOLETE_OSS_DRIVER
-	help
-	  Answer Y if you have a sound card based on the Ensoniq SoundScape
-	  chipset. Such cards are being manufactured at least by Ensoniq, Spea
-	  and Reveal (Reveal makes also other cards).
-
-	  If you compile the driver into the kernel, you have to add
-	  "sscape=<io>,<irq>,<dma>,<mpuio>,<mpuirq>" to the kernel command
-	  line.
-
-config SOUND_GUS
-	tristate "Gravis Ultrasound support"
-	depends on SOUND_OSS && OBSOLETE_OSS_DRIVER
-	help
-	  Say Y here for any type of Gravis Ultrasound card, including the GUS
-	  or GUS MAX.  See also <file:Documentation/sound/oss/ultrasound> for more
-	  information on configuring this card with modules.
-
-	  If you compile the driver into the kernel, you have to add
-	  "gus=<io>,<irq>,<dma>,<dma2>" to the kernel command line.
-
-config SOUND_GUS16
-	bool "16 bit sampling option of GUS (_NOT_ GUS MAX)"
-	depends on SOUND_GUS
-	help
-	  Support for Gravis Ulstrasound (GUS) cards (other than the GUS),
-	  sampling at 16-bit width.
-
-config SOUND_GUSMAX
-	bool "GUS MAX support"
-	depends on SOUND_GUS
-	help
-	  Support for Gravis Ulstrasound MAX.
-
 config SOUND_VMIDI
 	tristate "Loopback MIDI device support"
 	depends on SOUND_OSS
@@ -742,7 +572,7 @@ config SOUND_MPU401
 
 config SOUND_NM256
 	tristate "NM256AV/NM256ZX audio support"
-	depends on SOUND_OSS && OBSOLETE_OSS_DRIVER
+	depends on SOUND_OSS
 	help
 	  Say M here to include audio support for the NeoMagic 256AV/256ZX
 	  chipsets. These are the audio chipsets found in the Sony
@@ -752,35 +582,6 @@ config SOUND_NM256
 
 	  See <file:Documentation/sound/oss/NM256> for further information.
 
-config SOUND_MAD16
-	tristate "OPTi MAD16 and/or Mozart based cards"
-	depends on SOUND_OSS && OBSOLETE_OSS_DRIVER
-	---help---
-	  Answer Y if your card has a Mozart (OAK OTI-601) or MAD16 (OPTi
-	  82C928 or 82C929 or 82C931) audio interface chip. These chips are
-	  quite common so it's possible that many no-name cards have one of
-	  them. In addition the MAD16 chip is used in some cards made by known
-	  manufacturers such as Turtle Beach (Tropez), Reveal (some models)
-	  and Diamond (latest ones). Note however that the Tropez sound cards
-	  have their own driver; if you have one of those, say N here and Y or
-	  M to "Full support for Turtle Beach WaveFront", below.
-
-	  If you compile the driver into the kernel, you have to add
-	  "mad16=<io>,<irq>,<dma>,<dma2>,<mpuio>,<mpuirq>" to the
-	  kernel command line.
-
-	  See also <file:Documentation/sound/oss/Opti> and
-	  <file:Documentation/sound/oss/MAD16> for more information on setting
-	  these cards up as modules.
-
-config MAD16_OLDCARD
-	bool "Support MIDI in older MAD16 based cards (requires SB)"
-	depends on SOUND_MAD16
-	help
-	  Answer Y (or M) if you have an older card based on the C928 or
-	  Mozart chipset and you want to have MIDI support. If you enable this
-	  option you also need to enable support for Sound Blaster.
-
 config SOUND_PAS
 	tristate "ProAudioSpectrum 16 support"
 	depends on SOUND_OSS
@@ -873,53 +674,9 @@ config SOUND_SB
 	  You can say M here to compile this driver as a module; the module is
 	  called sb.
 
-config SOUND_AWE32_SYNTH
-	tristate "AWE32 synth"
-	depends on SOUND_OSS && OBSOLETE_OSS_DRIVER
-	help
-	  Say Y here if you have a Sound Blaster SB32, AWE32-PnP, SB AWE64 or
-	  similar sound card. See <file:Documentation/sound/oss/README.awe>,
-	  <file:Documentation/sound/oss/AWE32> and the Soundblaster-AWE
-	  mini-HOWTO, available from <http://www.tldp.org/docs.html#howto>
-	  for more info.
-
-config SOUND_WAVEFRONT
-	tristate "Full support for Turtle Beach WaveFront (Tropez Plus, Tropez, Maui) synth/soundcards"
-	depends on SOUND_OSS && m && OBSOLETE_OSS_DRIVER
-	help
-	  Answer Y or M if you have a Tropez Plus, Tropez or Maui sound card
-	  and read the files <file:Documentation/sound/oss/Wavefront> and
-	  <file:Documentation/sound/oss/Tropez+>.
-
-config SOUND_MAUI
-	tristate "Limited support for Turtle Beach Wave Front (Maui, Tropez) synthesizers"
-	depends on SOUND_OSS && OBSOLETE_OSS_DRIVER
-	help
-	  Say Y here if you have a Turtle Beach Wave Front, Maui, or Tropez
-	  sound card.
-
-	  If you compile the driver into the kernel, you have to add
-	  "maui=<io>,<irq>" to the kernel command line.
-
-config MAUI_HAVE_BOOT
-	bool "Have OSWF.MOT firmware file"
-	depends on SOUND_MAUI=y && !STANDALONE
-	help
-	  Turtle Beach Maui and Tropez sound cards have a microcontroller
-	  which needs to be initialized prior to use. OSWF.MOT is a file
-	  distributed with the card's DOS/Windows drivers. Answer Y if you
-	  have this file.
-
-config MAUI_BOOT_FILE
-	string "Full pathname of OSWF.MOT firmware file"
-	depends on MAUI_HAVE_BOOT
-	default "/etc/sound/oswf.mot"
-	help
-	  Enter the full pathname of your OSWF.MOT file, starting from /.
-
 config SOUND_YM3812
 	tristate "Yamaha FM synthesizer (YM3812/OPL-3) support"
-	depends on SOUND_OSS && OBSOLETE_OSS_DRIVER
+	depends on SOUND_OSS
 	---help---
 	  Answer Y if your card has a FM chip made by Yamaha (OPL2/OPL3/OPL4).
 	  Answering Y is usually a safe and recommended choice, however some
@@ -933,18 +690,6 @@ config SOUND_YM3812
 
 	  If unsure, say Y.
 
-config SOUND_OPL3SA1
-	tristate "Yamaha OPL3-SA1 audio controller"
-	depends on SOUND_OSS && OBSOLETE_OSS_DRIVER
-	help
-	  Say Y or M if you have a Yamaha OPL3-SA1 sound chip, which is
-	  usually built into motherboards. Read
-	  <file:Documentation/sound/oss/OPL3-SA> for details.
-
-	  If you compile the driver into the kernel, you have to add
-	  "opl3sa=<io>,<irq>,<dma>,<dma2>,<mpuio>,<mpuirq>" to the kernel
-	  command line.
-
 config SOUND_OPL3SA2
 	tristate "Yamaha OPL3-SA2 and SA3 based PnP cards"
 	depends on SOUND_OSS
@@ -959,19 +704,6 @@ config SOUND_OPL3SA2
 	  "opl3sa2=<io>,<irq>,<dma>,<dma2>,<mssio>,<mpuio>" to the kernel
 	  command line.
 
-config SOUND_YMFPCI
-	tristate "Yamaha YMF7xx PCI audio (native mode)"
-	depends on SOUND_OSS && PCI && OBSOLETE_OSS_DRIVER
-	help
-	  Support for Yamaha cards including the YMF711, YMF715, YMF718,
-	  YMF719, YMF724, Waveforce 192XG, and Waveforce 192 Digital.
-
-config SOUND_YMFPCI_LEGACY
-	bool "Yamaha PCI legacy ports support"
-	depends on SOUND_YMFPCI
-	help
-	  Support for YMF7xx PCI cards emulating an MP401.
-
 config SOUND_UART6850
 	tristate "6850 UART support"
 	depends on SOUND_OSS
@@ -1101,30 +833,6 @@ config SOUND_KAHLUA
 	tristate "XpressAudio Sound Blaster emulation"
 	depends on SOUND_SB
 
-config SOUND_ALI5455
-	tristate "ALi5455 audio support"
-	depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
-
-config SOUND_FORTE
-	tristate "ForteMedia FM801 driver"
-	depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
-	help
-	  Say Y or M if you want driver support for the ForteMedia FM801 PCI
-	  audio controller (Abit AU10, Genius Sound Maker, HP Workstation
-	  zx2000, and others).
-
-config SOUND_RME96XX
-	tristate "RME Hammerfall (RME96XX) support"
-	depends on SOUND_PRIME && PCI && OBSOLETE_OSS_DRIVER
-	help
-	  Say Y or M if you have a Hammerfall or Hammerfall light
-	  multichannel card from RME. If you want to access advanced
-	  features of the card, read <file:Documentation/sound/oss/rme96xx>.
-
-config SOUND_AD1980
-	tristate "AD1980 front/back switch plugin"
-	depends on SOUND_PRIME && OBSOLETE_OSS_DRIVER
-
 config SOUND_SH_DAC_AUDIO
 	tristate "SuperH DAC audio support"
 	depends on SOUND_PRIME && CPU_SH3
diff --git a/sound/oss/ad1848.c b/sound/oss/ad1848.c
index 49796be955f3..e04fa49b0dc8 100644
--- a/sound/oss/ad1848.c
+++ b/sound/oss/ad1848.c
@@ -2026,7 +2026,8 @@ int ad1848_init (char *name, struct resource *ports, int irq, int dma_playback,
 	if (irq > 0)
 	{
 		devc->dev_no = my_dev;
-		if (request_irq(devc->irq, adintr, 0, devc->name, (void *)my_dev) < 0)
+		if (request_irq(devc->irq, adintr, 0, devc->name,
+				(void *)(long)my_dev) < 0)
 		{
 			printk(KERN_WARNING "ad1848: Unable to allocate IRQ\n");
 			/* Don't free it either then.. */
@@ -2175,7 +2176,7 @@ void ad1848_unload(int io_base, int irq, int dma_playback, int dma_capture, int
 		if (!share_dma)
 		{
 			if (devc->irq > 0) /* There is no point in freeing irq, if it wasn't allocated */
-				free_irq(devc->irq, (void *)devc->dev_no);
+				free_irq(devc->irq, (void *)(long)devc->dev_no);
 
 			sound_free_dma(dma_playback);
 
@@ -2204,7 +2205,7 @@ irqreturn_t adintr(int irq, void *dev_id, struct pt_regs *dummy)
 	unsigned char c930_stat = 0;
 	int cnt = 0;
 
-	dev = (int)dev_id;
+	dev = (long)dev_id;
 	devc = (ad1848_info *) audio_devs[dev]->devc;
 
 interrupt_again:		/* Jump back here if int status doesn't reset */
@@ -2900,7 +2901,8 @@ static struct pnp_dev *activate_dev(char *devname, char *resname, struct pnp_dev
 	return(dev);
 }
 
-static struct pnp_dev *ad1848_init_generic(struct pnp_card *bus, struct address_info *hw_config, int slot)
+static struct pnp_dev __init *ad1848_init_generic(struct pnp_card *bus,
+				struct address_info *hw_config, int slot)
 {
 
 	/* Configure Audio device */
diff --git a/sound/oss/ad1889.c b/sound/oss/ad1889.c
index 54dabf862802..a4ca7569e700 100644
--- a/sound/oss/ad1889.c
+++ b/sound/oss/ad1889.c
@@ -75,7 +75,7 @@ static inline void ad1889_set_wav_rate(ad1889_dev_t *dev, int rate)
 
 	DBG("Setting WAV rate to %d\n", rate);
 	dev->state[AD_WAV_STATE].dmabuf.rate = rate;
-	AD1889_WRITEW(dev, AD_DSWAS, rate);
+	AD1889_WRITEW(dev, AD_DS_WAS, rate);
 
 	/* Cycle the DAC to enable the new rate */
 	ac97_codec->codec_write(dev->ac97_codec, AC97_POWER_CONTROL, 0x0200);
@@ -89,14 +89,14 @@ static inline void ad1889_set_wav_fmt(ad1889_dev_t *dev, int fmt)
 
 	DBG("Setting WAV format to 0x%x\n", fmt);
 
-	tmp = AD1889_READW(ad1889_dev, AD_DSWSMC);
+	tmp = AD1889_READW(ad1889_dev, AD_DS_WSMC);
 	if (fmt & AFMT_S16_LE) {
 		//tmp |= 0x0100; /* set WA16 */
 		tmp |= 0x0300; /* set WA16 stereo */
 	} else if (fmt & AFMT_U8) {
 		tmp &= ~0x0100; /* clear WA16 */
 	} 
-	AD1889_WRITEW(ad1889_dev, AD_DSWSMC, tmp);
+	AD1889_WRITEW(ad1889_dev, AD_DS_WSMC, tmp);
 }
 
 static inline void ad1889_set_adc_fmt(ad1889_dev_t *dev, int fmt)
@@ -105,13 +105,13 @@ static inline void ad1889_set_adc_fmt(ad1889_dev_t *dev, int fmt)
 
 	DBG("Setting ADC format to 0x%x\n", fmt);
 
-	tmp = AD1889_READW(ad1889_dev, AD_DSRAMC);
+	tmp = AD1889_READW(ad1889_dev, AD_DS_RAMC);
 	if (fmt & AFMT_S16_LE) {
 		tmp |= 0x0100; /* set WA16 */
 	} else if (fmt & AFMT_U8) {
 		tmp &= ~0x0100; /* clear WA16 */
 	} 
-	AD1889_WRITEW(ad1889_dev, AD_DSRAMC, tmp);
+	AD1889_WRITEW(ad1889_dev, AD_DS_RAMC, tmp);
 }
 
 static void ad1889_start_wav(ad1889_state_t *state)
@@ -145,21 +145,21 @@ static void ad1889_start_wav(ad1889_state_t *state)
 	    dmabuf->rd_ptr, dmabuf->dma_len);
 
         /* load up the current register set */
-	AD1889_WRITEL(ad1889_dev, AD_DMAWAVCC, cnt);
-	AD1889_WRITEL(ad1889_dev, AD_DMAWAVICC, cnt);
-	AD1889_WRITEL(ad1889_dev, AD_DMAWAVCA, dmabuf->dma_handle);
+	AD1889_WRITEL(ad1889_dev, AD_DMA_WAVCC, cnt);
+	AD1889_WRITEL(ad1889_dev, AD_DMA_WAVICC, cnt);
+	AD1889_WRITEL(ad1889_dev, AD_DMA_WAVCA, dmabuf->dma_handle);
 
 	/* TODO: for now we load the base registers with the same thing */
-	AD1889_WRITEL(ad1889_dev, AD_DMAWAVBC, cnt);
-	AD1889_WRITEL(ad1889_dev, AD_DMAWAVIBC, cnt);
-	AD1889_WRITEL(ad1889_dev, AD_DMAWAVBA, dmabuf->dma_handle);
+	AD1889_WRITEL(ad1889_dev, AD_DMA_WAVBC, cnt);
+	AD1889_WRITEL(ad1889_dev, AD_DMA_WAVIBC, cnt);
+	AD1889_WRITEL(ad1889_dev, AD_DMA_WAVBA, dmabuf->dma_handle);
 
 	/* and we're off to the races... */
-	AD1889_WRITEL(ad1889_dev, AD_DMACHSS, 0x8);
-	tmp = AD1889_READW(ad1889_dev, AD_DSWSMC);
+	AD1889_WRITEL(ad1889_dev, AD_DMA_CHSS, 0x8);
+	tmp = AD1889_READW(ad1889_dev, AD_DS_WSMC);
 	tmp |= 0x0400; /* set WAEN */
-	AD1889_WRITEW(ad1889_dev, AD_DSWSMC, tmp);
-	(void) AD1889_READW(ad1889_dev, AD_DSWSMC); /* flush posted PCI write */
+	AD1889_WRITEW(ad1889_dev, AD_DS_WSMC, tmp);
+	(void) AD1889_READW(ad1889_dev, AD_DS_WSMC); /* flush posted PCI write */
 
 	dmabuf->enable |= DAC_RUNNING;
 
@@ -179,10 +179,10 @@ static void ad1889_stop_wav(ad1889_state_t *state)
 		u16 tmp;
 		unsigned long cnt = dmabuf->dma_len;
 
-		tmp = AD1889_READW(ad1889_dev, AD_DSWSMC);
+		tmp = AD1889_READW(ad1889_dev, AD_DS_WSMC);
 		tmp &= ~0x0400; /* clear WAEN */
-		AD1889_WRITEW(ad1889_dev, AD_DSWSMC, tmp);
-		(void) AD1889_READW(ad1889_dev, AD_DSWSMC); /* flush posted PCI write */
+		AD1889_WRITEW(ad1889_dev, AD_DS_WSMC, tmp);
+		(void) AD1889_READW(ad1889_dev, AD_DS_WSMC); /* flush posted PCI write */
 		pci_unmap_single(ad1889_dev->pci, dmabuf->dma_handle, 
 				cnt, PCI_DMA_TODEVICE);
 
@@ -211,7 +211,7 @@ static void ad1889_startstop_adc(ad1889_state_t *state, int start)
 
 	spin_lock_irqsave(&state->card->lock, flags);
 	
-	tmp = AD1889_READW(ad1889_dev, AD_DSRAMC);
+	tmp = AD1889_READW(ad1889_dev, AD_DS_RAMC);
 	if (start) {
 		state->dmabuf.enable |= ADC_RUNNING;
 		tmp |= 0x0004; /* set ADEN */
@@ -219,7 +219,7 @@ static void ad1889_startstop_adc(ad1889_state_t *state, int start)
 		state->dmabuf.enable &= ~ADC_RUNNING;
 		tmp &= ~0x0004; /* clear ADEN */
 	}
-	AD1889_WRITEW(ad1889_dev, AD_DSRAMC, tmp);
+	AD1889_WRITEW(ad1889_dev, AD_DS_RAMC, tmp);
 
 	spin_unlock_irqrestore(&state->card->lock, flags);
 }
@@ -301,53 +301,53 @@ static int ad1889_read_proc (char *page, char **start, off_t off,
 	int len, i;
 	ad1889_dev_t *dev = data;
 	ad1889_reg_t regs[] = {
-		{ "WSMC", AD_DSWSMC, 16 },
-		{ "RAMC", AD_DSRAMC, 16 },
-		{ "WADA", AD_DSWADA, 16 },
-		{ "SYDA", AD_DSSYDA, 16 },
-		{ "WAS", AD_DSWAS, 16 },
-		{ "RES", AD_DSRES, 16 },
-		{ "CCS", AD_DSCCS, 16 },
-		{ "ADCBA", AD_DMAADCBA, 32 },
-		{ "ADCCA", AD_DMAADCCA, 32 },
-		{ "ADCBC", AD_DMAADCBC, 32 },
-		{ "ADCCC", AD_DMAADCCC, 32 },
-		{ "ADCIBC", AD_DMAADCIBC, 32 },
-		{ "ADCICC", AD_DMAADCICC, 32 },
-		{ "ADCCTRL", AD_DMAADCCTRL, 16 },
-		{ "WAVBA", AD_DMAWAVBA, 32 },
-		{ "WAVCA", AD_DMAWAVCA, 32 },
-		{ "WAVBC", AD_DMAWAVBC, 32 },
-		{ "WAVCC", AD_DMAWAVCC, 32 },
-		{ "WAVIBC", AD_DMAWAVIBC, 32 },
-		{ "WAVICC", AD_DMAWAVICC, 32 },
-		{ "WAVCTRL", AD_DMAWAVCTRL, 16 },
-		{ "DISR", AD_DMADISR, 32 },
-		{ "CHSS", AD_DMACHSS, 32 },
-		{ "IPC", AD_GPIOIPC, 16 },
-		{ "OP", AD_GPIOOP, 16 },
-		{ "IP", AD_GPIOIP, 16 },
-		{ "ACIC", AD_ACIC, 16 },
-		{ "AC97_RESET", 0x100 + AC97_RESET, 16 },
-		{ "AC97_MASTER_VOL_STEREO", 0x100 + AC97_MASTER_VOL_STEREO, 16 },
-		{ "AC97_HEADPHONE_VOL", 0x100 + AC97_HEADPHONE_VOL, 16 },
-		{ "AC97_MASTER_VOL_MONO", 0x100 + AC97_MASTER_VOL_MONO, 16 },
-		{ "AC97_MASTER_TONE", 0x100 + AC97_MASTER_TONE, 16 },
-		{ "AC97_PCBEEP_VOL", 0x100 + AC97_PCBEEP_VOL, 16 },
-		{ "AC97_PHONE_VOL", 0x100 + AC97_PHONE_VOL, 16 },
-		{ "AC97_MIC_VOL", 0x100 + AC97_MIC_VOL, 16 },
-		{ "AC97_LINEIN_VOL", 0x100 + AC97_LINEIN_VOL, 16 },
-		{ "AC97_CD_VOL", 0x100 + AC97_CD_VOL, 16 },
-		{ "AC97_VIDEO_VOL", 0x100 + AC97_VIDEO_VOL, 16 },
-		{ "AC97_AUX_VOL", 0x100 + AC97_AUX_VOL, 16 },
-		{ "AC97_PCMOUT_VOL", 0x100 + AC97_PCMOUT_VOL, 16 },
-		{ "AC97_RECORD_SELECT", 0x100 + AC97_RECORD_SELECT, 16 },
-		{ "AC97_RECORD_GAIN", 0x100 + AC97_RECORD_GAIN, 16 },
-		{ "AC97_RECORD_GAIN_MIC", 0x100 + AC97_RECORD_GAIN_MIC, 16 },
-		{ "AC97_GENERAL_PURPOSE", 0x100 + AC97_GENERAL_PURPOSE, 16 },
-		{ "AC97_3D_CONTROL", 0x100 + AC97_3D_CONTROL, 16 },
-		{ "AC97_MODEM_RATE", 0x100 + AC97_MODEM_RATE, 16 },
-		{ "AC97_POWER_CONTROL", 0x100 + AC97_POWER_CONTROL, 16 },
+		{ "WSMC", AD_DS_WSMC, 16 },
+		{ "RAMC", AD_DS_RAMC, 16 },
+		{ "WADA", AD_DS_WADA, 16 },
+		{ "SYDA", AD_DS_SYDA, 16 },
+		{ "WAS", AD_DS_WAS, 16 },
+		{ "RES", AD_DS_RES, 16 },
+		{ "CCS", AD_DS_CCS, 16 },
+		{ "ADCBA", AD_DMA_ADCBA, 32 },
+		{ "ADCCA", AD_DMA_ADCCA, 32 },
+		{ "ADCBC", AD_DMA_ADCBC, 32 },
+		{ "ADCCC", AD_DMA_ADCCC, 32 },
+		{ "ADCIBC", AD_DMA_ADCIBC, 32 },
+		{ "ADCICC", AD_DMA_ADCICC, 32 },
+		{ "ADCCTRL", AD_DMA_ADCCTRL, 16 },
+		{ "WAVBA", AD_DMA_WAVBA, 32 },
+		{ "WAVCA", AD_DMA_WAVCA, 32 },
+		{ "WAVBC", AD_DMA_WAVBC, 32 },
+		{ "WAVCC", AD_DMA_WAVCC, 32 },
+		{ "WAVIBC", AD_DMA_WAVIBC, 32 },
+		{ "WAVICC", AD_DMA_WAVICC, 32 },
+		{ "WAVCTRL", AD_DMA_WAVCTRL, 16 },
+		{ "DISR", AD_DMA_DISR, 32 },
+		{ "CHSS", AD_DMA_CHSS, 32 },
+		{ "IPC", AD_GPIO_IPC, 16 },
+		{ "OP", AD_GPIO_OP, 16 },
+		{ "IP", AD_GPIO_IP, 16 },
+		{ "ACIC", AD_AC97_ACIC, 16 },
+		{ "AC97_RESET", AD_AC97_BASE + AC97_RESET, 16 },
+		{ "AC97_MASTER_VOL_STEREO", AD_AC97_BASE + AC97_MASTER_VOL_STEREO, 16 },
+		{ "AC97_HEADPHONE_VOL", AD_AC97_BASE + AC97_HEADPHONE_VOL, 16 },
+		{ "AC97_MASTER_VOL_MONO", AD_AC97_BASE + AC97_MASTER_VOL_MONO, 16 },
+		{ "AC97_MASTER_TONE", AD_AC97_BASE + AC97_MASTER_TONE, 16 },
+		{ "AC97_PCBEEP_VOL", AD_AC97_BASE + AC97_PCBEEP_VOL, 16 },
+		{ "AC97_PHONE_VOL", AD_AC97_BASE + AC97_PHONE_VOL, 16 },
+		{ "AC97_MIC_VOL", AD_AC97_BASE + AC97_MIC_VOL, 16 },
+		{ "AC97_LINEIN_VOL", AD_AC97_BASE + AC97_LINEIN_VOL, 16 },
+		{ "AC97_CD_VOL", AD_AC97_BASE + AC97_CD_VOL, 16 },
+		{ "AC97_VIDEO_VOL", AD_AC97_BASE + AC97_VIDEO_VOL, 16 },
+		{ "AC97_AUX_VOL", AD_AC97_BASE + AC97_AUX_VOL, 16 },
+		{ "AC97_PCMOUT_VOL", AD_AC97_BASE + AC97_PCMOUT_VOL, 16 },
+		{ "AC97_RECORD_SELECT", AD_AC97_BASE + AC97_RECORD_SELECT, 16 },
+		{ "AC97_RECORD_GAIN", AD_AC97_BASE + AC97_RECORD_GAIN, 16 },
+		{ "AC97_RECORD_GAIN_MIC", AD_AC97_BASE + AC97_RECORD_GAIN_MIC, 16 },
+		{ "AC97_GENERAL_PURPOSE", AD_AC97_BASE + AC97_GENERAL_PURPOSE, 16 },
+		{ "AC97_3D_CONTROL", AD_AC97_BASE + AC97_3D_CONTROL, 16 },
+		{ "AC97_MODEM_RATE", AD_AC97_BASE + AC97_MODEM_RATE, 16 },
+		{ "AC97_POWER_CONTROL", AD_AC97_BASE + AC97_POWER_CONTROL, 16 },
 		{ NULL }
 	};
 
@@ -400,9 +400,9 @@ static inline unsigned long ad1889_get_dma_addr(ad1889_state_t *state)
 	}
 	
 	if (dmabuf->enable & DAC_RUNNING)
-		offset = le32_to_cpu(AD1889_READL(state->card, AD_DMAWAVBA));
+		offset = le32_to_cpu(AD1889_READL(state->card, AD_DMA_WAVBA));
 	else
-		offset = le32_to_cpu(AD1889_READL(state->card, AD_DMAADCBA));
+		offset = le32_to_cpu(AD1889_READL(state->card, AD_DMA_ADCBA));
 
 	return (unsigned long)bus_to_virt((unsigned long)offset) - (unsigned long)dmabuf->rawbuf;
 }
@@ -639,9 +639,9 @@ static int ad1889_ioctl(struct inode *inode, struct file *file, unsigned int cmd
 		if (val > 5400 && val < 48000)
 		{
 			if (file->f_mode & FMODE_WRITE)
-				AD1889_WRITEW(ad1889_dev, AD_DSWAS, val);
+				AD1889_WRITEW(ad1889_dev, AD_DS_WAS, val);
 			if (file->f_mode & FMODE_READ)
-				AD1889_WRITEW(ad1889_dev, AD_DSRES, val);
+				AD1889_WRITEW(ad1889_dev, AD_DS_RES, val);
 		}
 		return 0;
 
@@ -649,22 +649,22 @@ static int ad1889_ioctl(struct inode *inode, struct file *file, unsigned int cmd
 		if (get_user(val, p))
 			return -EFAULT;
 		if (file->f_mode & FMODE_READ) {
-			val = AD1889_READW(ad1889_dev, AD_DSWSMC);
+			val = AD1889_READW(ad1889_dev, AD_DS_WSMC);
 			if (val) {
 				val |= 0x0200;  /* set WAST */
 			} else {
 				val &= ~0x0200; /* clear WAST */
 			}
-			AD1889_WRITEW(ad1889_dev, AD_DSWSMC, val);
+			AD1889_WRITEW(ad1889_dev, AD_DS_WSMC, val);
 		}
 		if (file->f_mode & FMODE_WRITE) {
-			val = AD1889_READW(ad1889_dev, AD_DSRAMC);
+			val = AD1889_READW(ad1889_dev, AD_DS_RAMC);
 			if (val) {
 				val |= 0x0002;  /* set ADST */
 			} else {
 				val &= ~0x0002; /* clear ADST */
 			}
-			AD1889_WRITEW(ad1889_dev, AD_DSRAMC, val);
+			AD1889_WRITEW(ad1889_dev, AD_DS_RAMC, val);
 		}
 
 		return 0;
@@ -739,7 +739,7 @@ static int ad1889_ioctl(struct inode *inode, struct file *file, unsigned int cmd
 		break;
 
 	case SOUND_PCM_READ_RATE:
-		return put_user(AD1889_READW(ad1889_dev, AD_DSWAS), p);
+		return put_user(AD1889_READW(ad1889_dev, AD_DS_WAS), p);
 
 	case SOUND_PCM_READ_CHANNELS:
 	case SOUND_PCM_READ_BITS:
@@ -769,7 +769,7 @@ static int ad1889_open(struct inode *inode, struct file *file)
 
 	ad1889_set_wav_rate(ad1889_dev, 48000);
 	ad1889_set_wav_fmt(ad1889_dev, AFMT_S16_LE);
-	AD1889_WRITEW(ad1889_dev, AD_DSWADA, 0x0404); /* attenuation */
+	AD1889_WRITEW(ad1889_dev, AD_DS_WADA, 0x0404); /* attenuation */
 	return nonseekable_open(inode, file);
 }
 
@@ -826,15 +826,15 @@ static void ad1889_codec_write(struct ac97_codec *ac97, u8 reg, u16 val)
 {
 	ad1889_dev_t *dev = ac97->private_data;
 
-	//DBG("Writing 0x%x to 0x%lx\n", val, dev->regbase + 0x100 + reg);
-	AD1889_WRITEW(dev, 0x100 + reg, val);
+	//DBG("Writing 0x%x to 0x%lx\n", val, dev->regbase + AD_AC97_BASE + reg);
+	AD1889_WRITEW(dev, AD_AC97_BASE + reg, val);
 }
 
 static u16 ad1889_codec_read(struct ac97_codec *ac97, u8 reg)
 {
 	ad1889_dev_t *dev = ac97->private_data;
-	//DBG("Reading from 0x%lx\n", dev->regbase + 0x100 + reg);
-	return AD1889_READW(dev, 0x100 + reg);
+	//DBG("Reading from 0x%lx\n", dev->regbase + AD_AC97_BASE + reg);
+	return AD1889_READW(dev, AD_AC97_BASE + reg);
 }	
 
 static int ad1889_ac97_init(ad1889_dev_t *dev, int id)
@@ -883,24 +883,24 @@ static int ad1889_aclink_reset(struct pci_dev * pcidev)
 	int retry = 200;
 	ad1889_dev_t *dev = pci_get_drvdata(pcidev);
 
-	AD1889_WRITEW(dev, AD_DSCCS, 0x8000); /* turn on clock */
-	AD1889_READW(dev, AD_DSCCS); 
+	AD1889_WRITEW(dev, AD_DS_CCS, 0x8000); /* turn on clock */
+	AD1889_READW(dev, AD_DS_CCS);
 
 	WAIT_10MS();
 
-	stat = AD1889_READW(dev, AD_ACIC);
+	stat = AD1889_READW(dev, AD_AC97_ACIC);
 	stat |= 0x0002;				/* Reset Disable */
-	AD1889_WRITEW(dev, AD_ACIC, stat);
-	(void) AD1889_READW(dev, AD_ACIC);	/* flush posted write */
+	AD1889_WRITEW(dev, AD_AC97_ACIC, stat);
+	(void) AD1889_READW(dev, AD_AC97_ACIC);	/* flush posted write */
 
 	udelay(10);
 
-	stat = AD1889_READW(dev, AD_ACIC);
+	stat = AD1889_READW(dev, AD_AC97_ACIC);
 	stat |= 0x0001;				/* Interface Enable */
-	AD1889_WRITEW(dev, AD_ACIC, stat);
+	AD1889_WRITEW(dev, AD_AC97_ACIC, stat);
 
 	do {
-		if (AD1889_READW(dev, AD_ACIC) & 0x8000)	/* Ready */
+		if (AD1889_READW(dev, AD_AC97_ACIC) & 0x8000)	/* Ready */
 			break;
 		WAIT_10MS();
 		retry--;
@@ -908,16 +908,16 @@ static int ad1889_aclink_reset(struct pci_dev * pcidev)
 
 	if (!retry) {
 		printk(KERN_ERR "ad1889_aclink_reset: codec is not ready [0x%x]\n",
-			    AD1889_READW(dev, AD_ACIC));
+			    AD1889_READW(dev, AD_AC97_ACIC));
 		return -EBUSY;
 	}
 
 	/* TODO reset AC97 codec */
 	/* TODO set wave/adc pci ctrl status */
 
-	stat = AD1889_READW(dev, AD_ACIC);
+	stat = AD1889_READW(dev, AD_AC97_ACIC);
 	stat |= 0x0004;				/* Audio Stream Output Enable */
-	AD1889_WRITEW(dev, AD_ACIC, stat);
+	AD1889_WRITEW(dev, AD_AC97_ACIC, stat);
 	return 0;
 }
 
@@ -935,10 +935,10 @@ static irqreturn_t ad1889_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 	u32 stat;
 	ad1889_dev_t *dev = (ad1889_dev_t *)dev_id;
 
-	stat = AD1889_READL(dev, AD_DMADISR);
+	stat = AD1889_READL(dev, AD_DMA_DISR);
 
 	/* clear ISR */
-	AD1889_WRITEL(dev, AD_DMADISR, stat);
+	AD1889_WRITEL(dev, AD_DMA_DISR, stat);
 
 	if (stat & 0x8) {		/* WAVI */
 		DBG("WAV interrupt\n");
@@ -964,15 +964,15 @@ static void ad1889_initcfg(ad1889_dev_t *dev)
 	u32 tmp32;
 
 	/* make sure the interrupt bits are setup the way we want */
-	tmp32 = AD1889_READL(dev, AD_DMAWAVCTRL);
+	tmp32 = AD1889_READL(dev, AD_DMA_WAVCTRL);
 	tmp32 &= ~0xff; /* flat dma, no sg, mask out the intr bits */
 	tmp32 |= 0x6;  /* intr on count, loop */
-	AD1889_WRITEL(dev, AD_DMAWAVCTRL, tmp32);
+	AD1889_WRITEL(dev, AD_DMA_WAVCTRL, tmp32);
 
 	/* unmute... */
-	tmp16 = AD1889_READW(dev, AD_DSWADA);
+	tmp16 = AD1889_READW(dev, AD_DS_WADA);
 	tmp16 &= ~0x8080;
-	AD1889_WRITEW(dev, AD_DSWADA, tmp16);
+	AD1889_WRITEW(dev, AD_DS_WADA, tmp16);
 }
 
 static int __devinit ad1889_probe(struct pci_dev *pcidev, const struct pci_device_id *ent)
@@ -1005,7 +1005,7 @@ static int __devinit ad1889_probe(struct pci_dev *pcidev, const struct pci_devic
 		goto out1;
 	}
 
-	dev->regbase = ioremap_nocache(bar, AD_DSIOMEMSIZE);
+	dev->regbase = ioremap_nocache(bar, AD_DS_IOMEMSIZE);
 	if (!dev->regbase) {
 		printk(KERN_ERR DEVNAME ": unable to remap iomem\n");
 		goto out2;
diff --git a/sound/oss/ad1889.h b/sound/oss/ad1889.h
index 861b3213f30b..09913765967a 100644
--- a/sound/oss/ad1889.h
+++ b/sound/oss/ad1889.h
@@ -1,57 +1,58 @@
 #ifndef _AD1889_H_
 #define _AD1889_H_
 
-#define AD_DSWSMC	0x00	/* DMA input wave/syn mixer control */
-#define AD_DSRAMC	0x02	/* DMA output resamp/ADC mixer control */
-#define AD_DSWADA	0x04	/* DMA input wave attenuation */
-#define AD_DSSYDA	0x06	/* DMA input syn attentuation */
-#define AD_DSWAS	0x08	/* wave input sample rate */
-#define AD_DSRES	0x0a	/* resampler output sample rate */
-#define AD_DSCCS	0x0c	/* chip control/status */
-
-#define AD_DMARESBA	0x40	/* RES base addr */
-#define AD_DMARESCA	0x44	/* RES current addr */
-#define AD_DMARESBC	0x48	/* RES base cnt */
-#define AD_DMARESCC	0x4c	/* RES current count */
-#define AD_DMAADCBA	0x50	/* ADC */
-#define AD_DMAADCCA	0x54
-#define AD_DMAADCBC	0x58
-#define AD_DMAADCCC	0x5c
-#define AD_DMASYNBA	0x60	/* SYN */
-#define AD_DMASYNCA	0x64
-#define AD_DMASYNBC	0x68
-#define AD_DMASYNCC	0x6c
-#define AD_DMAWAVBA	0x70	/* WAV */
-#define AD_DMAWAVCA	0x74
-#define AD_DMAWAVBC	0x78
-#define AD_DMAWAVCC	0x7c
-#define AD_DMARESICC	0x80	/* RES interrupt current count */
-#define AD_DMARESIBC	0x84	/* RES interrupt base count */
-#define AD_DMAADCICC	0x88	/* ADC interrupt current count */
-#define AD_DMAADCIBC	0x8c	/* ADC interrupt base count */
-#define AD_DMASYNICC	0x90	/* SYN interrupt current count */
-#define AD_DMASYNIBC	0x94	/* SYN interrupt base count */
-#define AD_DMAWAVICC	0x98	/* WAV interrupt current count */
-#define AD_DMAWAVIBC	0x9c	/* WAV interrupt base count */
-#define AD_DMARESCTRL	0xa0	/* RES PCI control/status */
-#define AD_DMAADCCTRL	0xa8	/* ADC PCI control/status */
-#define AD_DMASYNCTRL	0xb0	/* SYN PCI control/status */
-#define AD_DMAWAVCTRL	0xb8	/* WAV PCI control/status */
-#define AD_DMADISR	0xc0	/* PCI DMA intr status */
-#define AD_DMACHSS	0xc4	/* PCI DMA channel stop status */
-
-#define AD_GPIOIPC	0xc8	/* IO port ctrl */
-#define AD_GPIOOP	0xca	/* IO output status */
-#define AD_GPIOIP	0xcc	/* IO input status */
+#define AD_DS_WSMC	0x00	/* DMA input wave/syn mixer control */
+#define AD_DS_RAMC	0x02	/* DMA output resamp/ADC mixer control */
+#define AD_DS_WADA	0x04	/* DMA input wave attenuation */
+#define AD_DS_SYDA	0x06	/* DMA input syn attentuation */
+#define AD_DS_WAS	0x08	/* wave input sample rate */
+#define AD_DS_RES	0x0a	/* resampler output sample rate */
+#define AD_DS_CCS	0x0c	/* chip control/status */
+
+#define AD_DMA_RESBA	0x40	/* RES base addr */
+#define AD_DMA_RESCA	0x44	/* RES current addr */
+#define AD_DMA_RESBC	0x48	/* RES base cnt */
+#define AD_DMA_RESCC	0x4c	/* RES current count */
+#define AD_DMA_ADCBA	0x50	/* ADC */
+#define AD_DMA_ADCCA	0x54
+#define AD_DMA_ADCBC	0x58
+#define AD_DMA_ADCCC	0x5c
+#define AD_DMA_SYNBA	0x60	/* SYN */
+#define AD_DMA_SYNCA	0x64
+#define AD_DMA_SYNBC	0x68
+#define AD_DMA_SYNCC	0x6c
+#define AD_DMA_WAVBA	0x70	/* WAV */
+#define AD_DMA_WAVCA	0x74
+#define AD_DMA_WAVBC	0x78
+#define AD_DMA_WAVCC	0x7c
+#define AD_DMA_RESICC	0x80	/* RES interrupt current count */
+#define AD_DMA_RESIBC	0x84	/* RES interrupt base count */
+#define AD_DMA_ADCICC	0x88	/* ADC interrupt current count */
+#define AD_DMA_ADCIBC	0x8c	/* ADC interrupt base count */
+#define AD_DMA_SYNICC	0x90	/* SYN interrupt current count */
+#define AD_DMA_SYNIBC	0x94	/* SYN interrupt base count */
+#define AD_DMA_WAVICC	0x98	/* WAV interrupt current count */
+#define AD_DMA_WAVIBC	0x9c	/* WAV interrupt base count */
+#define AD_DMA_RESCTRL	0xa0	/* RES PCI control/status */
+#define AD_DMA_ADCCTRL	0xa8	/* ADC PCI control/status */
+#define AD_DMA_SYNCTRL	0xb0	/* SYN PCI control/status */
+#define AD_DMA_WAVCTRL	0xb8	/* WAV PCI control/status */
+#define AD_DMA_DISR	0xc0	/* PCI DMA intr status */
+#define AD_DMA_CHSS	0xc4	/* PCI DMA channel stop status */
+
+#define AD_GPIO_IPC	0xc8	/* IO port ctrl */
+#define AD_GPIO_OP	0xca	/* IO output status */
+#define AD_GPIO_IP	0xcc	/* IO input status */
 
 /* AC97 registers, 0x100 - 0x17f; see ac97.h */
-#define AD_ACIC		0x180	/* AC Link interface ctrl */
+#define AD_AC97_BASE    0x100   /* ac97 base register */
+#define AD_AC97_ACIC	0x180	/* AC Link interface ctrl */
 
 /* OPL3; BAR1 */
-#define AD_OPLM0AS	0x00	/* Music0 address/status */
-#define AD_OPLM0DATA	0x01	/* Music0 data */
-#define AD_OPLM1A	0x02	/* Music1 address */
-#define AD_OPLM1DATA	0x03	/* Music1 data */
+#define AD_OPL_M0AS	0x00	/* Music0 address/status */
+#define AD_OPL_M0DATA	0x01	/* Music0 data */
+#define AD_OPL_M1A	0x02	/* Music1 address */
+#define AD_OPL_M1DATA	0x03	/* Music1 data */
 /* 0x04-0x0f reserved */
 
 /* MIDI; BAR2 */
@@ -59,9 +60,9 @@
 #define AD_MISC		0x01	/* MIDI status/cmd */
 /* 0x02-0xff reserved */
 
-#define AD_DSIOMEMSIZE	512
-#define AD_OPLMEMSIZE	16
-#define AD_MIDIMEMSIZE	16
+#define AD_DS_IOMEMSIZE	512
+#define AD_OPL_MEMSIZE	16
+#define AD_MIDI_MEMSIZE	16
 
 #define AD_WAV_STATE	0
 #define AD_ADC_STATE	1
diff --git a/sound/oss/dmasound/tas_common.c b/sound/oss/dmasound/tas_common.c
index 81315996c0f1..882ae98a41b1 100644
--- a/sound/oss/dmasound/tas_common.c
+++ b/sound/oss/dmasound/tas_common.c
@@ -195,8 +195,8 @@ tas_init(int driver_id, const char *driver_name)
 
 	printk(KERN_INFO "tas driver [%s])\n", driver_name);
 
-#ifndef CONFIG_I2C_KEYWEST
-	request_module("i2c-keywest");
+#ifndef CONFIG_I2C_POWERMAC
+	request_module("i2c-powermac");
 #endif
 	tas_node = find_devices("deq");
 	if (tas_node == NULL)
diff --git a/sound/oss/nm256_audio.c b/sound/oss/nm256_audio.c
index 7de079b202f2..6e662ac009ae 100644
--- a/sound/oss/nm256_audio.c
+++ b/sound/oss/nm256_audio.c
@@ -960,7 +960,7 @@ static struct ac97_mixer_value_list mixer_defaults[] = {
 
 
 /* Installs the AC97 mixer into CARD.  */
-static int __init
+static int __devinit
 nm256_install_mixer (struct nm256_info *card)
 {
     int mixer;
@@ -995,7 +995,7 @@ nm256_install_mixer (struct nm256_info *card)
  * RAM.
  */
 
-static void __init
+static void __devinit
 nm256_peek_for_sig (struct nm256_info *card)
 {
     u32 port1offset 
@@ -1056,7 +1056,7 @@ nm256_install(struct pci_dev *pcidev, enum nm256rev rev, char *verstr)
     card->playing  = 0;
     card->recording = 0;
     card->rev = rev;
-	spin_lock_init(&card->lock);
+    spin_lock_init(&card->lock);
 
     /* Init the memory port info.  */
     for (x = 0; x < 2; x++) {
diff --git a/sound/pci/ad1889.c b/sound/pci/ad1889.c
index c6c8333acc62..eece1c7e55a0 100644
--- a/sound/pci/ad1889.c
+++ b/sound/pci/ad1889.c
@@ -39,7 +39,6 @@
 #include <linux/interrupt.h>
 #include <linux/compiler.h>
 #include <linux/delay.h>
-#include <linux/dma-mapping.h>
 
 #include <sound/driver.h>
 #include <sound/core.h>
@@ -1052,7 +1051,7 @@ snd_ad1889_remove(struct pci_dev *pci)
 	pci_set_drvdata(pci, NULL);
 }
 
-static struct pci_device_id snd_ad1889_ids[] = {
+static struct pci_device_id snd_ad1889_ids[] __devinitdata = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_ANALOG_DEVICES, PCI_DEVICE_ID_AD1889JS) },
 	{ 0, },
 };
diff --git a/sound/pci/ali5451/ali5451.c b/sound/pci/ali5451/ali5451.c
index fc92b6896c24..e2dbc2118902 100644
--- a/sound/pci/ali5451/ali5451.c
+++ b/sound/pci/ali5451/ali5451.c
@@ -279,7 +279,7 @@ struct snd_ali {
 #endif
 };
 
-static struct pci_device_id snd_ali_ids[] = {
+static struct pci_device_id snd_ali_ids[] __devinitdata = {
 	{PCI_DEVICE(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M5451), 0, 0, 0},
 	{0, }
 };
diff --git a/sound/pci/als300.c b/sound/pci/als300.c
index 91899f87f037..901b08ae9174 100644
--- a/sound/pci/als300.c
+++ b/sound/pci/als300.c
@@ -146,7 +146,7 @@ struct snd_als300_substream_data {
 	int block_counter_register;
 };
 
-static struct pci_device_id snd_als300_ids[] = {
+static struct pci_device_id snd_als300_ids[] __devinitdata = {
 	{ 0x4005, 0x0300, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_ALS300 },
 	{ 0x4005, 0x0308, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_ALS300_PLUS },
 	{ 0, }
diff --git a/sound/pci/als4000.c b/sound/pci/als4000.c
index 100d8127a411..60423b1c678b 100644
--- a/sound/pci/als4000.c
+++ b/sound/pci/als4000.c
@@ -116,7 +116,7 @@ struct snd_card_als4000 {
 #endif
 };
 
-static struct pci_device_id snd_als4000_ids[] = {
+static struct pci_device_id snd_als4000_ids[] __devinitdata = {
 	{ 0x4005, 0x4000, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },   /* ALS4000 */
 	{ 0, }
 };
diff --git a/sound/pci/atiixp.c b/sound/pci/atiixp.c
index 12e618851262..d0f759d86d3d 100644
--- a/sound/pci/atiixp.c
+++ b/sound/pci/atiixp.c
@@ -284,7 +284,7 @@ struct atiixp {
 
 /*
  */
-static struct pci_device_id snd_atiixp_ids[] = {
+static struct pci_device_id snd_atiixp_ids[] __devinitdata = {
 	{ 0x1002, 0x4341, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* SB200 */
 	{ 0x1002, 0x4361, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* SB300 */
 	{ 0x1002, 0x4370, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* SB400 */
diff --git a/sound/pci/atiixp_modem.c b/sound/pci/atiixp_modem.c
index 1d3766044643..12a34c39caa7 100644
--- a/sound/pci/atiixp_modem.c
+++ b/sound/pci/atiixp_modem.c
@@ -262,7 +262,7 @@ struct atiixp_modem {
 
 /*
  */
-static struct pci_device_id snd_atiixp_ids[] = {
+static struct pci_device_id snd_atiixp_ids[] __devinitdata = {
 	{ 0x1002, 0x434d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* SB200 */
 	{ 0x1002, 0x4378, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, /* SB400 */
 	{ 0, }
diff --git a/sound/pci/au88x0/au8810.c b/sound/pci/au88x0/au8810.c
index fce22c7af0ea..bd3352998ad0 100644
--- a/sound/pci/au88x0/au8810.c
+++ b/sound/pci/au88x0/au8810.c
@@ -1,6 +1,6 @@
 #include "au8810.h"
 #include "au88x0.h"
-static struct pci_device_id snd_vortex_ids[] = {
+static struct pci_device_id snd_vortex_ids[] __devinitdata = {
 	{PCI_VENDOR_ID_AUREAL, PCI_DEVICE_ID_AUREAL_ADVANTAGE,
 	 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1,},
 	{0,}
diff --git a/sound/pci/au88x0/au8820.c b/sound/pci/au88x0/au8820.c
index d1fbcce07257..7e3fd8372d8d 100644
--- a/sound/pci/au88x0/au8820.c
+++ b/sound/pci/au88x0/au8820.c
@@ -1,6 +1,6 @@
 #include "au8820.h"
 #include "au88x0.h"
-static struct pci_device_id snd_vortex_ids[] = {
+static struct pci_device_id snd_vortex_ids[] __devinitdata = {
 	{PCI_VENDOR_ID_AUREAL, PCI_DEVICE_ID_AUREAL_VORTEX_1,
 	 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0,},
 	{0,}
diff --git a/sound/pci/au88x0/au8830.c b/sound/pci/au88x0/au8830.c
index d4f2717c14fb..b840f6608a61 100644
--- a/sound/pci/au88x0/au8830.c
+++ b/sound/pci/au88x0/au8830.c
@@ -1,6 +1,6 @@
 #include "au8830.h"
 #include "au88x0.h"
-static struct pci_device_id snd_vortex_ids[] = {
+static struct pci_device_id snd_vortex_ids[] __devinitdata = {
 	{PCI_VENDOR_ID_AUREAL, PCI_DEVICE_ID_AUREAL_VORTEX_2,
 	 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0,},
 	{0,}
diff --git a/sound/pci/azt3328.c b/sound/pci/azt3328.c
index 680077e1e057..52a364524262 100644
--- a/sound/pci/azt3328.c
+++ b/sound/pci/azt3328.c
@@ -216,7 +216,7 @@ struct snd_azf3328 {
 	int irq;
 };
 
-static const struct pci_device_id snd_azf3328_ids[] = {
+static const struct pci_device_id snd_azf3328_ids[] __devinitdata = {
 	{ 0x122D, 0x50DC, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },   /* PCI168/3328 */
 	{ 0x122D, 0x80DA, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },   /* 3328 */
 	{ 0, }
diff --git a/sound/pci/bt87x.c b/sound/pci/bt87x.c
index 7b44a8db033d..9ee07d4aac1e 100644
--- a/sound/pci/bt87x.c
+++ b/sound/pci/bt87x.c
@@ -774,7 +774,7 @@ static int __devinit snd_bt87x_create(struct snd_card *card,
 	  .driver_data = rate }
 
 /* driver_data is the default digital_rate value for that device */
-static struct pci_device_id snd_bt87x_ids[] = {
+static struct pci_device_id snd_bt87x_ids[] __devinitdata = {
 	/* Hauppauge WinTV series */
 	BT_DEVICE(PCI_DEVICE_ID_BROOKTREE_878, 0x0070, 0x13eb, 32000),
 	/* Hauppauge WinTV series */
@@ -911,7 +911,7 @@ static void __devexit snd_bt87x_remove(struct pci_dev *pci)
 
 /* default entries for all Bt87x cards - it's not exported */
 /* driver_data is set to 0 to call detection */
-static struct pci_device_id snd_bt87x_default_ids[] = {
+static struct pci_device_id snd_bt87x_default_ids[] __devinitdata = {
 	BT_DEVICE(PCI_DEVICE_ID_BROOKTREE_878, PCI_ANY_ID, PCI_ANY_ID, 0),
 	BT_DEVICE(PCI_DEVICE_ID_BROOKTREE_879, PCI_ANY_ID, PCI_ANY_ID, 0),
 	{ }
diff --git a/sound/pci/ca0106/ca0106_main.c b/sound/pci/ca0106/ca0106_main.c
index 9477838a9c88..fd8bfebfbd54 100644
--- a/sound/pci/ca0106/ca0106_main.c
+++ b/sound/pci/ca0106/ca0106_main.c
@@ -1561,7 +1561,7 @@ static void __devexit snd_ca0106_remove(struct pci_dev *pci)
 }
 
 // PCI IDs
-static struct pci_device_id snd_ca0106_ids[] = {
+static struct pci_device_id snd_ca0106_ids[] __devinitdata = {
 	{ 0x1102, 0x0007, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },	/* Audigy LS or Live 24bit */
 	{ 0, }
 };
diff --git a/sound/pci/cmipci.c b/sound/pci/cmipci.c
index 2ecbddbbdcf0..e5ce2dabd081 100644
--- a/sound/pci/cmipci.c
+++ b/sound/pci/cmipci.c
@@ -2609,7 +2609,7 @@ static inline void snd_cmipci_proc_init(struct cmipci *cm) {}
 #endif
 
 
-static struct pci_device_id snd_cmipci_ids[] = {
+static struct pci_device_id snd_cmipci_ids[] __devinitdata = {
 	{PCI_VENDOR_ID_CMEDIA, PCI_DEVICE_ID_CMEDIA_CM8338A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
 	{PCI_VENDOR_ID_CMEDIA, PCI_DEVICE_ID_CMEDIA_CM8338B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
 	{PCI_VENDOR_ID_CMEDIA, PCI_DEVICE_ID_CMEDIA_CM8738, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
diff --git a/sound/pci/cs4281.c b/sound/pci/cs4281.c
index ac4e73f69c1d..b3c94d83450a 100644
--- a/sound/pci/cs4281.c
+++ b/sound/pci/cs4281.c
@@ -494,7 +494,7 @@ struct cs4281 {
 
 static irqreturn_t snd_cs4281_interrupt(int irq, void *dev_id, struct pt_regs *regs);
 
-static struct pci_device_id snd_cs4281_ids[] = {
+static struct pci_device_id snd_cs4281_ids[] __devinitdata = {
 	{ 0x1013, 0x6005, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },	/* CS4281 */
 	{ 0, }
 };
diff --git a/sound/pci/cs46xx/cs46xx.c b/sound/pci/cs46xx/cs46xx.c
index c590602e20cd..848d772ae3c6 100644
--- a/sound/pci/cs46xx/cs46xx.c
+++ b/sound/pci/cs46xx/cs46xx.c
@@ -65,7 +65,7 @@ MODULE_PARM_DESC(thinkpad, "Force to enable Thinkpad's CLKRUN control.");
 module_param_array(mmap_valid, bool, NULL, 0444);
 MODULE_PARM_DESC(mmap_valid, "Support OSS mmap.");
 
-static struct pci_device_id snd_cs46xx_ids[] = {
+static struct pci_device_id snd_cs46xx_ids[] __devinitdata = {
         { 0x1013, 0x6001, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },   /* CS4280 */
         { 0x1013, 0x6003, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },   /* CS4612 */
         { 0x1013, 0x6004, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },   /* CS4615 */
diff --git a/sound/pci/cs5535audio/cs5535audio.c b/sound/pci/cs5535audio/cs5535audio.c
index 9fc7f3827461..2c1213a35dcc 100644
--- a/sound/pci/cs5535audio/cs5535audio.c
+++ b/sound/pci/cs5535audio/cs5535audio.c
@@ -45,7 +45,7 @@ static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX;
 static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR;
 static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP;
 
-static struct pci_device_id snd_cs5535audio_ids[] = {
+static struct pci_device_id snd_cs5535audio_ids[] __devinitdata = {
 	{ PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_CS5535_AUDIO,
 	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },
 	{ PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_AUDIO,
diff --git a/sound/pci/emu10k1/emu10k1.c b/sound/pci/emu10k1/emu10k1.c
index 2dfa932f7825..42b11ba1d210 100644
--- a/sound/pci/emu10k1/emu10k1.c
+++ b/sound/pci/emu10k1/emu10k1.c
@@ -77,7 +77,7 @@ MODULE_PARM_DESC(subsystem, "Force card subsystem model.");
 /*
  * Class 0401: 1102:0008 (rev 00) Subsystem: 1102:1001 -> Audigy2 Value  Model:SB0400
  */
-static struct pci_device_id snd_emu10k1_ids[] = {
+static struct pci_device_id snd_emu10k1_ids[] __devinitdata = {
 	{ 0x1102, 0x0002, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },	/* EMU10K1 */
 	{ 0x1102, 0x0004, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1 },	/* Audigy */
 	{ 0x1102, 0x0008, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1 },	/* Audigy 2 Value SB0400 */
diff --git a/sound/pci/emu10k1/emu10k1x.c b/sound/pci/emu10k1/emu10k1x.c
index 3e332f398162..d51290c18167 100644
--- a/sound/pci/emu10k1/emu10k1x.c
+++ b/sound/pci/emu10k1/emu10k1x.c
@@ -36,7 +36,6 @@
 #include <linux/dma-mapping.h>
 #include <linux/slab.h>
 #include <linux/moduleparam.h>
-#include <linux/dma-mapping.h>
 #include <sound/core.h>
 #include <sound/initval.h>
 #include <sound/pcm.h>
@@ -1596,7 +1595,7 @@ static void __devexit snd_emu10k1x_remove(struct pci_dev *pci)
 }
 
 // PCI IDs
-static struct pci_device_id snd_emu10k1x_ids[] = {
+static struct pci_device_id snd_emu10k1x_ids[] __devinitdata = {
 	{ 0x1102, 0x0006, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },	/* Dell OEM version (EMU10K1) */
 	{ 0, }
 };
diff --git a/sound/pci/ens1370.c b/sound/pci/ens1370.c
index a5533c86b0b6..ca9e34e88f62 100644
--- a/sound/pci/ens1370.c
+++ b/sound/pci/ens1370.c
@@ -446,7 +446,7 @@ struct ensoniq {
 
 static irqreturn_t snd_audiopci_interrupt(int irq, void *dev_id, struct pt_regs *regs);
 
-static struct pci_device_id snd_audiopci_ids[] = {
+static struct pci_device_id snd_audiopci_ids[] __devinitdata = {
 #ifdef CHIP1370
 	{ 0x1274, 0x5000, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },	/* ES1370 */
 #endif
diff --git a/sound/pci/es1938.c b/sound/pci/es1938.c
index 4d62fe439177..6f9094ca4fb4 100644
--- a/sound/pci/es1938.c
+++ b/sound/pci/es1938.c
@@ -242,7 +242,7 @@ struct es1938 {
 
 static irqreturn_t snd_es1938_interrupt(int irq, void *dev_id, struct pt_regs *regs);
 
-static struct pci_device_id snd_es1938_ids[] = {
+static struct pci_device_id snd_es1938_ids[] __devinitdata = {
         { 0x125d, 0x1969, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },   /* Solo-1 */
 	{ 0, }
 };
diff --git a/sound/pci/es1968.c b/sound/pci/es1968.c
index e3ad17f53c29..5ff4175c7b6d 100644
--- a/sound/pci/es1968.c
+++ b/sound/pci/es1968.c
@@ -104,7 +104,6 @@
 #include <linux/slab.h>
 #include <linux/gameport.h>
 #include <linux/moduleparam.h>
-#include <linux/dma-mapping.h>
 #include <linux/mutex.h>
 
 #include <sound/core.h>
@@ -593,7 +592,7 @@ struct es1968 {
 
 static irqreturn_t snd_es1968_interrupt(int irq, void *dev_id, struct pt_regs *regs);
 
-static struct pci_device_id snd_es1968_ids[] = {
+static struct pci_device_id snd_es1968_ids[] __devinitdata = {
 	/* Maestro 1 */
         { 0x1285, 0x0100, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_MULTIMEDIA_AUDIO << 8, 0xffff00, TYPE_MAESTRO },
 	/* Maestro 2 */
diff --git a/sound/pci/fm801.c b/sound/pci/fm801.c
index 6ab4aefbccf8..d72fc28c580e 100644
--- a/sound/pci/fm801.c
+++ b/sound/pci/fm801.c
@@ -199,7 +199,7 @@ struct fm801 {
 #endif
 };
 
-static struct pci_device_id snd_fm801_ids[] = {
+static struct pci_device_id snd_fm801_ids[] __devinitdata = {
 	{ 0x1319, 0x0801, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_MULTIMEDIA_AUDIO << 8, 0xffff00, 0, },   /* FM801 */
 	{ 0x5213, 0x0510, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_MULTIMEDIA_AUDIO << 8, 0xffff00, 0, },   /* Gallant Odyssey Sound 4 */
 	{ 0, }
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index 0ad60ae29011..e821d65afa11 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -1614,7 +1614,7 @@ static void __devexit azx_remove(struct pci_dev *pci)
 }
 
 /* PCI IDs */
-static struct pci_device_id azx_ids[] = {
+static struct pci_device_id azx_ids[] __devinitdata = {
 	{ 0x8086, 0x2668, PCI_ANY_ID, PCI_ANY_ID, 0, 0, AZX_DRIVER_ICH }, /* ICH6 */
 	{ 0x8086, 0x27d8, PCI_ANY_ID, PCI_ANY_ID, 0, 0, AZX_DRIVER_ICH }, /* ICH7 */
 	{ 0x8086, 0x269a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, AZX_DRIVER_ICH }, /* ESB2 */
diff --git a/sound/pci/hda/patch_analog.c b/sound/pci/hda/patch_analog.c
index bcfca159c6a2..40f000ba1362 100644
--- a/sound/pci/hda/patch_analog.c
+++ b/sound/pci/hda/patch_analog.c
@@ -799,10 +799,14 @@ static struct hda_board_config ad1986a_cfg_tbl[] = {
 	{ .modelname = "laptop-eapd",	.config = AD1986A_LAPTOP_EAPD },
 	{ .pci_subvendor = 0x144d, .pci_subdevice = 0xc024,
 	  .config = AD1986A_LAPTOP_EAPD }, /* Samsung R65-T2300 Charis */
+	{ .pci_subvendor = 0x1043, .pci_subdevice = 0x1153,
+	  .config = AD1986A_LAPTOP_EAPD }, /* ASUS M9 */
 	{ .pci_subvendor = 0x1043, .pci_subdevice = 0x1213,
 	  .config = AD1986A_LAPTOP_EAPD }, /* ASUS A6J */
 	{ .pci_subvendor = 0x1043, .pci_subdevice = 0x11f7,
 	  .config = AD1986A_LAPTOP_EAPD }, /* ASUS U5A */
+	{ .pci_subvendor = 0x1043, .pci_subdevice = 0x1297,
+	  .config = AD1986A_LAPTOP_EAPD }, /* ASUS Z62F */
 	{ .pci_subvendor = 0x103c, .pci_subdevice = 0x30af,
 	  .config = AD1986A_LAPTOP_EAPD }, /* HP Compaq Presario B2800 */
 	{}
@@ -1330,12 +1334,8 @@ enum { AD1981_BASIC, AD1981_HP };
 
 static struct hda_board_config ad1981_cfg_tbl[] = {
 	{ .modelname = "hp", .config = AD1981_HP },
-	{ .pci_subvendor = 0x103c, .pci_subdevice = 0x30aa,
-	  .config = AD1981_HP }, /* HP nx6320 */
-	{ .pci_subvendor = 0x103c, .pci_subdevice = 0x309f,
-	  .config = AD1981_HP }, /* HP nx9420 AngelFire */
-	{ .pci_subvendor = 0x103c, .pci_subdevice = 0x30a2,
-	  .config = AD1981_HP }, /* HP nx9420 AngelFire */
+	/* All HP models */
+	{ .pci_subvendor = 0x103c, .config = AD1981_HP },
 	{ .modelname = "basic", .config = AD1981_BASIC },
 	{}
 };
@@ -2623,5 +2623,6 @@ struct hda_codec_preset snd_hda_preset_analog[] = {
 	{ .id = 0x11d41983, .name = "AD1983", .patch = patch_ad1983 },
 	{ .id = 0x11d41986, .name = "AD1986A", .patch = patch_ad1986a },
 	{ .id = 0x11d41988, .name = "AD1988", .patch = patch_ad1988 },
+	{ .id = 0x11d4198b, .name = "AD1988B", .patch = patch_ad1988 },
 	{} /* terminator */
 };
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 66bbdb60f50b..f0e9a9c90780 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -2148,6 +2148,7 @@ static struct hda_board_config alc880_cfg_tbl[] = {
 	{ .pci_subvendor = 0x1025, .pci_subdevice = 0x0087, .config = ALC880_6ST_DIG },
 	{ .pci_subvendor = 0x1297, .pci_subdevice = 0xc790, .config = ALC880_6ST_DIG }, /* Shuttle ST20G5 */
 	{ .pci_subvendor = 0x1509, .pci_subdevice = 0x925d, .config = ALC880_6ST_DIG }, /* FIC P4M-915GD1 */
+	{ .pci_subvendor = 0x1695, .pci_subdevice = 0x4012, .config = ALC880_5ST_DIG }, /* Epox EP-5LDA+ GLi */
 
 	{ .modelname = "asus", .config = ALC880_ASUS },
 	{ .pci_subvendor = 0x1043, .pci_subdevice = 0x1964, .config = ALC880_ASUS_DIG },
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 715260787953..8c440fb98603 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -1212,8 +1212,8 @@ static hda_nid_t vaio_mux_nids[] = { 0x15 };
 static struct hda_input_mux vaio_mux = {
 	.num_items = 2,
 	.items = {
-		/* { "HP", 0x0 },
-		   { "Unknown", 0x1 }, */
+		/* { "HP", 0x0 }, */
+		{ "Line", 0x1 },
 		{ "Mic", 0x2 },
 		{ "PCM", 0x3 },
 	}
diff --git a/sound/pci/ice1712/ice1712.c b/sound/pci/ice1712/ice1712.c
index 32f8415558a5..c56793b381e2 100644
--- a/sound/pci/ice1712/ice1712.c
+++ b/sound/pci/ice1712/ice1712.c
@@ -56,7 +56,6 @@
 #include <linux/dma-mapping.h>
 #include <linux/slab.h>
 #include <linux/moduleparam.h>
-#include <linux/dma-mapping.h>
 #include <linux/mutex.h>
 
 #include <sound/core.h>
@@ -108,7 +107,7 @@ module_param_array(dxr_enable, int, NULL, 0444);
 MODULE_PARM_DESC(dxr_enable, "Enable DXR support for Terratec DMX6FIRE.");
 
 
-static struct pci_device_id snd_ice1712_ids[] = {
+static struct pci_device_id snd_ice1712_ids[] __devinitdata = {
 	{ PCI_VENDOR_ID_ICE, PCI_DEVICE_ID_ICE_1712, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },   /* ICE1712 */
 	{ 0, }
 };
diff --git a/sound/pci/ice1712/ice1724.c b/sound/pci/ice1712/ice1724.c
index fce616c2761f..b1c007e022d2 100644
--- a/sound/pci/ice1712/ice1724.c
+++ b/sound/pci/ice1712/ice1724.c
@@ -86,7 +86,7 @@ MODULE_PARM_DESC(model, "Use the given board model.");
 
 
 /* Both VT1720 and VT1724 have the same PCI IDs */
-static struct pci_device_id snd_vt1724_ids[] = {
+static struct pci_device_id snd_vt1724_ids[] __devinitdata = {
 	{ PCI_VENDOR_ID_ICE, PCI_DEVICE_ID_VT1724, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
 	{ 0, }
 };
diff --git a/sound/pci/intel8x0.c b/sound/pci/intel8x0.c
index ebbf2cf4ca0f..0df7602568e2 100644
--- a/sound/pci/intel8x0.c
+++ b/sound/pci/intel8x0.c
@@ -413,7 +413,7 @@ struct intel8x0 {
 	u32 int_sta_mask;		/* interrupt status mask */
 };
 
-static struct pci_device_id snd_intel8x0_ids[] = {
+static struct pci_device_id snd_intel8x0_ids[] __devinitdata = {
 	{ 0x8086, 0x2415, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL },	/* 82801AA */
 	{ 0x8086, 0x2425, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL },	/* 82901AB */
 	{ 0x8086, 0x2445, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL },	/* 82801BA */
@@ -1293,6 +1293,7 @@ static int snd_intel8x0_ali_ac97spdifout_close(struct snd_pcm_substream *substre
 	return 0;
 }
 
+#if 0 // NYI
 static int snd_intel8x0_ali_spdifin_open(struct snd_pcm_substream *substream)
 {
 	struct intel8x0 *chip = snd_pcm_substream_chip(substream);
@@ -1308,7 +1309,6 @@ static int snd_intel8x0_ali_spdifin_close(struct snd_pcm_substream *substream)
 	return 0;
 }
 
-#if 0 // NYI
 static int snd_intel8x0_ali_spdifout_open(struct snd_pcm_substream *substream)
 {
 	struct intel8x0 *chip = snd_pcm_substream_chip(substream);
@@ -1435,6 +1435,7 @@ static struct snd_pcm_ops snd_intel8x0_ali_ac97spdifout_ops = {
 	.pointer =	snd_intel8x0_pcm_pointer,
 };
 
+#if 0 // NYI
 static struct snd_pcm_ops snd_intel8x0_ali_spdifin_ops = {
 	.open =		snd_intel8x0_ali_spdifin_open,
 	.close =	snd_intel8x0_ali_spdifin_close,
@@ -1446,7 +1447,6 @@ static struct snd_pcm_ops snd_intel8x0_ali_spdifin_ops = {
 	.pointer =	snd_intel8x0_pcm_pointer,
 };
 
-#if 0 // NYI
 static struct snd_pcm_ops snd_intel8x0_ali_spdifout_ops = {
 	.open =		snd_intel8x0_ali_spdifout_open,
 	.close =	snd_intel8x0_ali_spdifout_close,
@@ -1582,7 +1582,7 @@ static struct ich_pcm_table ali_pcms[] __devinitdata = {
 	{
 		.suffix = "IEC958",
 		.playback_ops = &snd_intel8x0_ali_ac97spdifout_ops,
-		.capture_ops = &snd_intel8x0_ali_spdifin_ops,
+		/* .capture_ops = &snd_intel8x0_ali_spdifin_ops, */
 		.prealloc_size = 64 * 1024,
 		.prealloc_max_size = 128 * 1024,
 		.ac97_idx = ALID_AC97SPDIFOUT,
diff --git a/sound/pci/intel8x0m.c b/sound/pci/intel8x0m.c
index 47e26aaa9ad7..720635f0cb81 100644
--- a/sound/pci/intel8x0m.c
+++ b/sound/pci/intel8x0m.c
@@ -224,7 +224,7 @@ struct intel8x0m {
 	unsigned int pcm_pos_shift;
 };
 
-static struct pci_device_id snd_intel8x0m_ids[] = {
+static struct pci_device_id snd_intel8x0m_ids[] __devinitdata = {
 	{ 0x8086, 0x2416, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL },	/* 82801AA */
 	{ 0x8086, 0x2426, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL },	/* 82901AB */
 	{ 0x8086, 0x2446, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DEVICE_INTEL },	/* 82801BA */
diff --git a/sound/pci/korg1212/korg1212.c b/sound/pci/korg1212/korg1212.c
index 4721c096335e..e39fad1a4200 100644
--- a/sound/pci/korg1212/korg1212.c
+++ b/sound/pci/korg1212/korg1212.c
@@ -424,7 +424,7 @@ module_param_array(enable, bool, NULL, 0444);
 MODULE_PARM_DESC(enable, "Enable Korg 1212 soundcard.");
 MODULE_AUTHOR("Haroldo Gamal <gamal@alternex.com.br>");
 
-static struct pci_device_id snd_korg1212_ids[] = {
+static struct pci_device_id snd_korg1212_ids[] __devinitdata = {
 	{
 		.vendor	   = 0x10b5,
 		.device	   = 0x906d,
diff --git a/sound/pci/maestro3.c b/sound/pci/maestro3.c
index 9c90d901e6b9..1928e06b6d82 100644
--- a/sound/pci/maestro3.c
+++ b/sound/pci/maestro3.c
@@ -41,7 +41,6 @@
 #include <linux/slab.h>
 #include <linux/vmalloc.h>
 #include <linux/moduleparam.h>
-#include <linux/dma-mapping.h>
 #include <sound/core.h>
 #include <sound/info.h>
 #include <sound/control.h>
@@ -870,7 +869,7 @@ struct snd_m3 {
 /*
  * pci ids
  */
-static struct pci_device_id snd_m3_ids[] = {
+static struct pci_device_id snd_m3_ids[] __devinitdata = {
 	{PCI_VENDOR_ID_ESS, PCI_DEVICE_ID_ESS_ALLEGRO_1, PCI_ANY_ID, PCI_ANY_ID,
 	 PCI_CLASS_MULTIMEDIA_AUDIO << 8, 0xffff00, 0},
 	{PCI_VENDOR_ID_ESS, PCI_DEVICE_ID_ESS_ALLEGRO, PCI_ANY_ID, PCI_ANY_ID,
diff --git a/sound/pci/mixart/mixart.c b/sound/pci/mixart/mixart.c
index b5a095052d4c..09cc0786495a 100644
--- a/sound/pci/mixart/mixart.c
+++ b/sound/pci/mixart/mixart.c
@@ -28,7 +28,6 @@
 #include <linux/dma-mapping.h>
 #include <linux/moduleparam.h>
 #include <linux/mutex.h>
-#include <linux/dma-mapping.h>
 
 #include <sound/core.h>
 #include <sound/initval.h>
@@ -62,7 +61,7 @@ MODULE_PARM_DESC(enable, "Enable Digigram " CARD_NAME " soundcard.");
 /*
  */
 
-static struct pci_device_id snd_mixart_ids[] = {
+static struct pci_device_id snd_mixart_ids[] __devinitdata = {
 	{ 0x1057, 0x0003, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, }, /* MC8240 */
 	{ 0, }
 };
diff --git a/sound/pci/nm256/nm256.c b/sound/pci/nm256/nm256.c
index cc297abc9d11..b92d6600deb9 100644
--- a/sound/pci/nm256/nm256.c
+++ b/sound/pci/nm256/nm256.c
@@ -263,7 +263,7 @@ struct nm256 {
 /*
  * PCI ids
  */
-static struct pci_device_id snd_nm256_ids[] = {
+static struct pci_device_id snd_nm256_ids[] __devinitdata = {
 	{PCI_VENDOR_ID_NEOMAGIC, PCI_DEVICE_ID_NEOMAGIC_NM256AV_AUDIO, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
 	{PCI_VENDOR_ID_NEOMAGIC, PCI_DEVICE_ID_NEOMAGIC_NM256ZX_AUDIO, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
 	{PCI_VENDOR_ID_NEOMAGIC, PCI_DEVICE_ID_NEOMAGIC_NM256XL_PLUS_AUDIO, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
diff --git a/sound/pci/pcxhr/pcxhr.c b/sound/pci/pcxhr/pcxhr.c
index 35875c8aa299..dafa2235abaa 100644
--- a/sound/pci/pcxhr/pcxhr.c
+++ b/sound/pci/pcxhr/pcxhr.c
@@ -30,7 +30,6 @@
 #include <linux/delay.h>
 #include <linux/moduleparam.h>
 #include <linux/mutex.h>
-#include <linux/dma-mapping.h>
 
 #include <sound/core.h>
 #include <sound/initval.h>
@@ -74,7 +73,7 @@ enum {
 	PCI_ID_LAST
 };
 
-static struct pci_device_id pcxhr_ids[] = {
+static struct pci_device_id pcxhr_ids[] __devinitdata = {
 	{ 0x10b5, 0x9656, 0x1369, 0xb001, 0, 0, PCI_ID_VX882HR, },   /* VX882HR */
 	{ 0x10b5, 0x9656, 0x1369, 0xb101, 0, 0, PCI_ID_PCX882HR, },  /* PCX882HR */
 	{ 0x10b5, 0x9656, 0x1369, 0xb201, 0, 0, PCI_ID_VX881HR, },   /* VX881HR */
diff --git a/sound/pci/pcxhr/pcxhr_hwdep.c b/sound/pci/pcxhr/pcxhr_hwdep.c
index 03517c10e99c..369c19fea985 100644
--- a/sound/pci/pcxhr/pcxhr_hwdep.c
+++ b/sound/pci/pcxhr/pcxhr_hwdep.c
@@ -385,8 +385,8 @@ static int pcxhr_hwdep_dsp_load(struct snd_hwdep *hw,
 	fw.size = dsp->length;
 	fw.data = vmalloc(fw.size);
 	if (! fw.data) {
-		snd_printk(KERN_ERR "pcxhr: cannot allocate dsp image (%d bytes)\n",
-			   fw.size);
+		snd_printk(KERN_ERR "pcxhr: cannot allocate dsp image (%lu bytes)\n",
+			   (unsigned long)fw.size);
 		return -ENOMEM;
 	}
 	if (copy_from_user(fw.data, dsp->image, dsp->length)) {
diff --git a/sound/pci/riptide/riptide.c b/sound/pci/riptide/riptide.c
index f148ee434a6b..d8cc985d7241 100644
--- a/sound/pci/riptide/riptide.c
+++ b/sound/pci/riptide/riptide.c
@@ -506,7 +506,7 @@ static int riptide_reset(struct cmdif *cif, struct snd_riptide *chip);
 /*
  */
 
-static struct pci_device_id snd_riptide_ids[] = {
+static struct pci_device_id snd_riptide_ids[] __devinitdata = {
 	{
 	 .vendor = 0x127a,.device = 0x4310,
 	 .subvendor = PCI_ANY_ID,.subdevice = PCI_ANY_ID,
@@ -527,7 +527,7 @@ static struct pci_device_id snd_riptide_ids[] = {
 };
 
 #ifdef SUPPORT_JOYSTICK
-static struct pci_device_id snd_riptide_joystick_ids[] = {
+static struct pci_device_id snd_riptide_joystick_ids[] __devinitdata = {
 	{
 	 .vendor = 0x127a,.device = 0x4312,
 	 .subvendor = PCI_ANY_ID,.subdevice = PCI_ANY_ID,
diff --git a/sound/pci/rme32.c b/sound/pci/rme32.c
index ab78544bf042..55b1d4838d97 100644
--- a/sound/pci/rme32.c
+++ b/sound/pci/rme32.c
@@ -227,7 +227,7 @@ struct rme32 {
 	struct snd_kcontrol *spdif_ctl;
 };
 
-static struct pci_device_id snd_rme32_ids[] = {
+static struct pci_device_id snd_rme32_ids[] __devinitdata = {
 	{PCI_VENDOR_ID_XILINX_RME, PCI_DEVICE_ID_RME_DIGI32,
 	 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0,},
 	{PCI_VENDOR_ID_XILINX_RME, PCI_DEVICE_ID_RME_DIGI32_8,
diff --git a/sound/pci/rme96.c b/sound/pci/rme96.c
index 6c2a9f4a7659..3c1bc533d511 100644
--- a/sound/pci/rme96.c
+++ b/sound/pci/rme96.c
@@ -232,7 +232,7 @@ struct rme96 {
 	struct snd_kcontrol   *spdif_ctl;
 };
 
-static struct pci_device_id snd_rme96_ids[] = {
+static struct pci_device_id snd_rme96_ids[] __devinitdata = {
 	{ PCI_VENDOR_ID_XILINX, PCI_DEVICE_ID_RME_DIGI96,
 	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },
 	{ PCI_VENDOR_ID_XILINX, PCI_DEVICE_ID_RME_DIGI96_8,
diff --git a/sound/pci/rme9652/hdsp.c b/sound/pci/rme9652/hdsp.c
index ebf7a2b86c23..61f82f0d5cc6 100644
--- a/sound/pci/rme9652/hdsp.c
+++ b/sound/pci/rme9652/hdsp.c
@@ -568,7 +568,7 @@ static void snd_hammerfall_free_buffer(struct snd_dma_buffer *dmab, struct pci_d
 }
 
 
-static struct pci_device_id snd_hdsp_ids[] = {
+static struct pci_device_id snd_hdsp_ids[] __devinitdata = {
 	{
 		.vendor = PCI_VENDOR_ID_XILINX,
 		.device = PCI_DEVICE_ID_XILINX_HAMMERFALL_DSP, 
diff --git a/sound/pci/rme9652/hdspm.c b/sound/pci/rme9652/hdspm.c
index b5538efd146b..722b9e6ce54a 100644
--- a/sound/pci/rme9652/hdspm.c
+++ b/sound/pci/rme9652/hdspm.c
@@ -426,7 +426,7 @@ static char channel_map_madi_qs[HDSPM_MAX_CHANNELS] = {
 };
 
 
-static struct pci_device_id snd_hdspm_ids[] = {
+static struct pci_device_id snd_hdspm_ids[] __devinitdata = {
 	{
 	 .vendor = PCI_VENDOR_ID_XILINX,
 	 .device = PCI_DEVICE_ID_XILINX_HAMMERFALL_DSP_MADI,
diff --git a/sound/pci/rme9652/rme9652.c b/sound/pci/rme9652/rme9652.c
index a687eb63236f..75d6406303d3 100644
--- a/sound/pci/rme9652/rme9652.c
+++ b/sound/pci/rme9652/rme9652.c
@@ -315,7 +315,7 @@ static void snd_hammerfall_free_buffer(struct snd_dma_buffer *dmab, struct pci_d
 }
 
 
-static struct pci_device_id snd_rme9652_ids[] = {
+static struct pci_device_id snd_rme9652_ids[] __devinitdata = {
 	{
 		.vendor	   = 0x10ee,
 		.device	   = 0x3fc4,
diff --git a/sound/pci/sonicvibes.c b/sound/pci/sonicvibes.c
index 2d66a09fe5ee..91f8bf3ae9fa 100644
--- a/sound/pci/sonicvibes.c
+++ b/sound/pci/sonicvibes.c
@@ -243,7 +243,7 @@ struct sonicvibes {
 #endif
 };
 
-static struct pci_device_id snd_sonic_ids[] = {
+static struct pci_device_id snd_sonic_ids[] __devinitdata = {
 	{ 0x5333, 0xca00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },
         { 0, }
 };
diff --git a/sound/pci/trident/trident.c b/sound/pci/trident/trident.c
index b4538045049f..9624a5f2b875 100644
--- a/sound/pci/trident/trident.c
+++ b/sound/pci/trident/trident.c
@@ -63,7 +63,7 @@ MODULE_PARM_DESC(pcm_channels, "Number of hardware channels assigned for PCM.");
 module_param_array(wavetable_size, int, NULL, 0444);
 MODULE_PARM_DESC(wavetable_size, "Maximum memory size in kB for wavetable synth.");
 
-static struct pci_device_id snd_trident_ids[] = {
+static struct pci_device_id snd_trident_ids[] __devinitdata = {
 	{PCI_DEVICE(PCI_VENDOR_ID_TRIDENT, PCI_DEVICE_ID_TRIDENT_4DWAVE_DX), 
 		PCI_CLASS_MULTIMEDIA_AUDIO << 8, 0xffff00, 0},
 	{PCI_DEVICE(PCI_VENDOR_ID_TRIDENT, PCI_DEVICE_ID_TRIDENT_4DWAVE_NX), 
diff --git a/sound/pci/via82xx.c b/sound/pci/via82xx.c
index 0f171dd1377b..39daf62d2bad 100644
--- a/sound/pci/via82xx.c
+++ b/sound/pci/via82xx.c
@@ -123,6 +123,7 @@ module_param(enable, bool, 0444);
 #define VIA_REV_8233A		0x40	/* 1 rec, 1 multi-pb, spdf */
 #define VIA_REV_8235		0x50	/* 2 rec, 4 pb, 1 multi-pb, spdif */
 #define VIA_REV_8237		0x60
+#define VIA_REV_8251		0x70
 
 /*
  *  Direct registers
@@ -395,7 +396,7 @@ struct via82xx {
 #endif
 };
 
-static struct pci_device_id snd_via82xx_ids[] = {
+static struct pci_device_id snd_via82xx_ids[] __devinitdata = {
 	/* 0x1106, 0x3058 */
 	{ PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_5, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TYPE_CARD_VIA686, },	/* 686A */
 	/* 0x1106, 0x3059 */
@@ -862,6 +863,11 @@ static snd_pcm_uframes_t snd_via8233_pcm_pointer(struct snd_pcm_substream *subst
 	if (!status)
 		status = inb(VIADEV_REG(viadev, OFFSET_STATUS));
 
+	/* An apparent bug in the 8251 is worked around by sending a 
+	 * REG_CTRL_START. */
+	if (chip->revision == VIA_REV_8251 && (status & VIA_REG_STAT_EOL))
+		snd_via82xx_pcm_trigger(substream, SNDRV_PCM_TRIGGER_START);
+
 	if (!(status & VIA_REG_STAT_ACTIVE)) {
 		res = 0;
 		goto unlock;
@@ -2313,6 +2319,7 @@ static struct via823x_info via823x_cards[] __devinitdata = {
 	{ VIA_REV_8233A, "VIA 8233A", TYPE_VIA8233A },
 	{ VIA_REV_8235, "VIA 8235", TYPE_VIA8233 },
 	{ VIA_REV_8237, "VIA 8237", TYPE_VIA8233 },
+	{ VIA_REV_8251, "VIA 8251", TYPE_VIA8233 },
 };
 
 /*
@@ -2325,7 +2332,7 @@ struct dxs_whitelist {
 	short action;	/* new dxs_support value */
 };
 
-static int __devinit check_dxs_list(struct pci_dev *pci)
+static int __devinit check_dxs_list(struct pci_dev *pci, int revision)
 {
 	static struct dxs_whitelist whitelist[] = {
 		{ .subvendor = 0x1005, .subdevice = 0x4710, .action = VIA_DXS_ENABLE }, /* Avance Logic Mobo */
@@ -2342,6 +2349,7 @@ static int __devinit check_dxs_list(struct pci_dev *pci)
 		{ .subvendor = 0x1043, .subdevice = 0x810d, .action = VIA_DXS_SRC }, /* ASUS */
 		{ .subvendor = 0x1043, .subdevice = 0x812a, .action = VIA_DXS_SRC    }, /* ASUS A8V Deluxe */ 
 		{ .subvendor = 0x1043, .subdevice = 0x8174, .action = VIA_DXS_SRC    }, /* ASUS */
+		{ .subvendor = 0x1043, .subdevice = 0x81b9, .action = VIA_DXS_SRC    }, /* ASUS A8V-MX */
 		{ .subvendor = 0x1071, .subdevice = 0x8375, .action = VIA_DXS_NO_VRA }, /* Vobis/Yakumo/Mitac notebook */
 		{ .subvendor = 0x1071, .subdevice = 0x8399, .action = VIA_DXS_NO_VRA }, /* Umax AB 595T (VIA K8N800A - VT8237) */
 		{ .subvendor = 0x10cf, .subdevice = 0x118e, .action = VIA_DXS_ENABLE }, /* FSC laptop */
@@ -2405,6 +2413,10 @@ static int __devinit check_dxs_list(struct pci_dev *pci)
 		}
 	}
 
+	/* for newer revision, default to DXS_SRC */
+	if (revision >= VIA_REV_8235)
+		return VIA_DXS_SRC;
+
 	/*
 	 * not detected, try 48k rate only to be sure.
 	 */
@@ -2449,7 +2461,7 @@ static int __devinit snd_via82xx_probe(struct pci_dev *pci,
 		}
 		if (chip_type != TYPE_VIA8233A) {
 			if (dxs_support == VIA_DXS_AUTO)
-				dxs_support = check_dxs_list(pci);
+				dxs_support = check_dxs_list(pci, revision);
 			/* force to use VIA8233 or 8233A model according to
 			 * dxs_support module option
 			 */
diff --git a/sound/pci/via82xx_modem.c b/sound/pci/via82xx_modem.c
index 22ce4d309929..ef97e50cd6c2 100644
--- a/sound/pci/via82xx_modem.c
+++ b/sound/pci/via82xx_modem.c
@@ -261,7 +261,7 @@ struct via82xx_modem {
 	struct snd_info_entry *proc_entry;
 };
 
-static struct pci_device_id snd_via82xx_modem_ids[] = {
+static struct pci_device_id snd_via82xx_modem_ids[] __devinitdata = {
 	{ 0x1106, 0x3068, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TYPE_CARD_VIA82XX_MODEM, },
 	{ 0, }
 };
diff --git a/sound/pci/vx222/vx222.c b/sound/pci/vx222/vx222.c
index c816ddf1b215..0f1ebb010a5e 100644
--- a/sound/pci/vx222/vx222.c
+++ b/sound/pci/vx222/vx222.c
@@ -60,7 +60,7 @@ enum {
 	VX_PCI_VX222_NEW
 };
 
-static struct pci_device_id snd_vx222_ids[] = {
+static struct pci_device_id snd_vx222_ids[] __devinitdata = {
 	{ 0x10b5, 0x9050, 0x1369, PCI_ANY_ID, 0, 0, VX_PCI_VX222_OLD, },   /* PLX */
 	{ 0x10b5, 0x9030, 0x1369, PCI_ANY_ID, 0, 0, VX_PCI_VX222_NEW, },   /* PLX */
 	{ 0, }
diff --git a/sound/pci/ymfpci/ymfpci.c b/sound/pci/ymfpci/ymfpci.c
index db57ce939fa8..65ebf5f1933a 100644
--- a/sound/pci/ymfpci/ymfpci.c
+++ b/sound/pci/ymfpci/ymfpci.c
@@ -70,7 +70,7 @@ MODULE_PARM_DESC(rear_switch, "Enable shared rear/line-in switch");
 module_param_array(rear_swap, bool, NULL, 0444);
 MODULE_PARM_DESC(rear_swap, "Swap rear channels (must be enabled for correct IEC958 (S/PDIF)) output");
 
-static struct pci_device_id snd_ymfpci_ids[] = {
+static struct pci_device_id snd_ymfpci_ids[] __devinitdata = {
         { 0x1073, 0x0004, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },   /* YMF724 */
         { 0x1073, 0x000d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },   /* YMF724F */
         { 0x1073, 0x000a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },   /* YMF740 */
diff --git a/sound/pcmcia/Kconfig b/sound/pcmcia/Kconfig
index 5d1b0b762efa..c9fa1a2bc58b 100644
--- a/sound/pcmcia/Kconfig
+++ b/sound/pcmcia/Kconfig
@@ -5,7 +5,7 @@ menu "PCMCIA devices"
 
 config SND_VXPOCKET
 	tristate "Digigram VXpocket"
-	depends on SND && PCMCIA && ISA
+	depends on SND && PCMCIA
 	select SND_VX_LIB
 	help
 	  Say Y here to include support for Digigram VXpocket and
@@ -16,7 +16,7 @@ config SND_VXPOCKET
 
 config SND_PDAUDIOCF
 	tristate "Sound Core PDAudioCF"
-	depends on SND && PCMCIA && ISA
+	depends on SND && PCMCIA
 	select SND_PCM
 	help
 	  Say Y here to include support for Sound Core PDAudioCF
diff --git a/sound/ppc/daca.c b/sound/ppc/daca.c
index aa09ebd9ffb8..46eebf5610e3 100644
--- a/sound/ppc/daca.c
+++ b/sound/ppc/daca.c
@@ -255,7 +255,7 @@ int __init snd_pmac_daca_init(struct snd_pmac *chip)
 
 #ifdef CONFIG_KMOD
 	if (current->fs->root)
-		request_module("i2c-keywest");
+		request_module("i2c-powermac");
 #endif /* CONFIG_KMOD */	
 
 	mix = kmalloc(sizeof(*mix), GFP_KERNEL);
diff --git a/sound/ppc/toonie.c b/sound/ppc/toonie.c
index 4e595172e423..1ac7c8552f50 100644
--- a/sound/ppc/toonie.c
+++ b/sound/ppc/toonie.c
@@ -335,7 +335,7 @@ static void toonie_cleanup(struct snd_pmac *chip)
 	chip->mixer_data = NULL;
 }
 
-int snd_pmac_toonie_init(struct snd_pmac *chip)
+int __init snd_pmac_toonie_init(struct snd_pmac *chip)
 {
 	struct pmac_toonie *mix;
 
diff --git a/sound/ppc/tumbler.c b/sound/ppc/tumbler.c
index 1146dd882bb1..70e4ebc70260 100644
--- a/sound/ppc/tumbler.c
+++ b/sound/ppc/tumbler.c
@@ -1313,7 +1313,7 @@ int __init snd_pmac_tumbler_init(struct snd_pmac *chip)
 
 #ifdef CONFIG_KMOD
 	if (current->fs->root)
-		request_module("i2c-keywest");
+		request_module("i2c-powermac");
 #endif /* CONFIG_KMOD */	
 
 	mix = kmalloc(sizeof(*mix), GFP_KERNEL);
diff --git a/sound/usb/usbquirks.h b/sound/usb/usbquirks.h
index 0992a0923f1a..9351846d7a9d 100644
--- a/sound/usb/usbquirks.h
+++ b/sound/usb/usbquirks.h
@@ -1531,6 +1531,15 @@ YAMAHA_DEVICE(0x7010, "UB99"),
 	}
 },
 {
+	USB_DEVICE_VENDOR_SPEC(0x0ccd, 0x0014),
+	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+		.vendor_name = "TerraTec",
+		.product_name = "PHASE 26",
+		.ifnum = 3,
+		.type = QUIRK_MIDI_STANDARD_INTERFACE
+	}
+},
+{
 	USB_DEVICE(0x0ccd, 0x0035),
 	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
 		.vendor_name = "Miditech",
diff --git a/usr/gen_init_cpio.c b/usr/gen_init_cpio.c
index 33dbcbf77c5b..83acd6cc0b3c 100644
--- a/usr/gen_init_cpio.c
+++ b/usr/gen_init_cpio.c
@@ -471,6 +471,7 @@ int main (int argc, char *argv[])
 				"ERROR: incorrect format, could not locate file type line %d: '%s'\n",
 				line_nr, line);
 			ec = -1;
+			break;
 		}
 
 		if ('\n' == *type) {
@@ -506,7 +507,8 @@ int main (int argc, char *argv[])
 				line_nr, line);
 		}
 	}
-	cpio_trailer();
+	if (ec == 0)
+		cpio_trailer();
 
 	exit(ec);
 }