diff options
| -rw-r--r-- | drivers/net/phy/icplus.c | 81 |
1 files changed, 80 insertions, 1 deletions
diff --git a/drivers/net/phy/icplus.c b/drivers/net/phy/icplus.c index 3dc8bbbe746b..7d5938b87660 100644 --- a/drivers/net/phy/icplus.c +++ b/drivers/net/phy/icplus.c @@ -25,6 +25,7 @@ #include <linux/mii.h> #include <linux/ethtool.h> #include <linux/phy.h> +#include <linux/property.h> #include <asm/io.h> #include <asm/irq.h> @@ -48,6 +49,23 @@ MODULE_LICENSE("GPL"); #define IP101A_G_IRQ_DUPLEX_CHANGE BIT(1) #define IP101A_G_IRQ_LINK_CHANGE BIT(0) +#define IP101G_DIGITAL_IO_SPEC_CTRL 0x1d +#define IP101G_DIGITAL_IO_SPEC_CTRL_SEL_INTR32 BIT(2) + +/* The 32-pin IP101GR package can re-configure the mode of the RXER/INTR_32 pin + * (pin number 21). The hardware default is RXER (receive error) mode. But it + * can be configured to interrupt mode manually. + */ +enum ip101gr_sel_intr32 { + IP101GR_SEL_INTR32_KEEP, + IP101GR_SEL_INTR32_INTR, + IP101GR_SEL_INTR32_RXER, +}; + +struct ip101a_g_phy_priv { + enum ip101gr_sel_intr32 sel_intr32; +}; + static int ip175c_config_init(struct phy_device *phydev) { int err, i; @@ -184,14 +202,74 @@ static int ip175c_config_aneg(struct phy_device *phydev) return 0; } +static int ip101a_g_probe(struct phy_device *phydev) +{ + struct device *dev = &phydev->mdio.dev; + struct ip101a_g_phy_priv *priv; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + /* Both functions (RX error and interrupt status) are sharing the same + * pin on the 32-pin IP101GR, so this is an exclusive choice. + */ + if (device_property_read_bool(dev, "icplus,select-rx-error") && + device_property_read_bool(dev, "icplus,select-interrupt")) { + dev_err(dev, + "RXER and INTR mode cannot be selected together\n"); + return -EINVAL; + } + + if (device_property_read_bool(dev, "icplus,select-rx-error")) + priv->sel_intr32 = IP101GR_SEL_INTR32_RXER; + else if (device_property_read_bool(dev, "icplus,select-interrupt")) + priv->sel_intr32 = IP101GR_SEL_INTR32_INTR; + else + priv->sel_intr32 = IP101GR_SEL_INTR32_KEEP; + + phydev->priv = priv; + + return 0; +} + static int ip101a_g_config_init(struct phy_device *phydev) { - int c; + struct ip101a_g_phy_priv *priv = phydev->priv; + int err, c; c = ip1xx_reset(phydev); if (c < 0) return c; + /* configure the RXER/INTR_32 pin of the 32-pin IP101GR if needed: */ + switch (priv->sel_intr32) { + case IP101GR_SEL_INTR32_RXER: + err = phy_modify(phydev, IP101G_DIGITAL_IO_SPEC_CTRL, + IP101G_DIGITAL_IO_SPEC_CTRL_SEL_INTR32, 0); + if (err < 0) + return err; + break; + + case IP101GR_SEL_INTR32_INTR: + err = phy_modify(phydev, IP101G_DIGITAL_IO_SPEC_CTRL, + IP101G_DIGITAL_IO_SPEC_CTRL_SEL_INTR32, + IP101G_DIGITAL_IO_SPEC_CTRL_SEL_INTR32); + if (err < 0) + return err; + break; + + default: + /* Don't touch IP101G_DIGITAL_IO_SPEC_CTRL because it's not + * documented on IP101A and it's not clear whether this would + * cause problems. + * For the 32-pin IP101GR we simply keep the SEL_INTR32 + * configuration as set by the bootloader when not configured + * to one of the special functions. + */ + break; + } + /* Enable Auto Power Saving mode */ c = phy_read(phydev, IP10XX_SPEC_CTRL_STATUS); c |= IP101A_G_APS_ON; @@ -257,6 +335,7 @@ static struct phy_driver icplus_driver[] = { .name = "ICPlus IP101A/G", .phy_id_mask = 0x0ffffff0, .features = PHY_BASIC_FEATURES, + .probe = ip101a_g_probe, .config_intr = ip101a_g_config_intr, .did_interrupt = ip101a_g_did_interrupt, .ack_interrupt = ip101a_g_ack_interrupt, |