aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--Documentation/devicetree/bindings/net/sti-dwmac.txt14
-rw-r--r--Documentation/devicetree/bindings/phy/phy-miphy365x.txt15
-rw-r--r--Documentation/devicetree/bindings/phy/phy-stih407-usb.txt10
-rw-r--r--arch/arm/boot/dts/stih407-family.dtsi9
-rw-r--r--arch/arm/boot/dts/stih410.dtsi70
-rw-r--r--arch/arm/boot/dts/stih415.dtsi12
-rw-r--r--arch/arm/boot/dts/stih416.dtsi22
-rw-r--r--arch/arm/configs/multi_v7_defconfig1
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/dwmac-sti.c13
-rw-r--r--drivers/phy/phy-miphy365x.c29
-rw-r--r--drivers/phy/phy-stih407-usb.c25
11 files changed, 143 insertions, 77 deletions
diff --git a/Documentation/devicetree/bindings/net/sti-dwmac.txt b/Documentation/devicetree/bindings/net/sti-dwmac.txt
index 6762a6b5da7e..d05c1e1fd9b6 100644
--- a/Documentation/devicetree/bindings/net/sti-dwmac.txt
+++ b/Documentation/devicetree/bindings/net/sti-dwmac.txt
@@ -9,14 +9,10 @@ The device node has following properties.
Required properties:
- compatible : Can be "st,stih415-dwmac", "st,stih416-dwmac",
"st,stih407-dwmac", "st,stid127-dwmac".
- - reg : Offset of the glue configuration register map in system
- configuration regmap pointed by st,syscon property and size.
- - st,syscon : Should be phandle to system configuration node which
- encompases this glue registers.
+ - st,syscon : Should be phandle/offset pair. The phandle to the syscon node which
+ encompases the glue register, and the offset of the control register.
- st,gmac_en: this is to enable the gmac into a dedicated sysctl control
register available on STiH407 SoC.
- - sti-ethconf: this is the gmac glue logic register to enable the GMAC,
- select among the different modes and program the clk retiming.
- pinctrl-0: pin-control for all the MII mode supported.
Optional properties:
@@ -40,10 +36,10 @@ ethernet0: dwmac@9630000 {
device_type = "network";
status = "disabled";
compatible = "st,stih407-dwmac", "snps,dwmac", "snps,dwmac-3.710";
- reg = <0x9630000 0x8000>, <0x80 0x4>;
- reg-names = "stmmaceth", "sti-ethconf";
+ reg = <0x9630000 0x8000>;
+ reg-names = "stmmaceth";
- st,syscon = <&syscfg_sbc_reg>;
+ st,syscon = <&syscfg_sbc_reg 0x80>;
st,gmac_en;
resets = <&softreset STIH407_ETH1_SOFTRESET>;
reset-names = "stmmaceth";
diff --git a/Documentation/devicetree/bindings/phy/phy-miphy365x.txt b/Documentation/devicetree/bindings/phy/phy-miphy365x.txt
index 42c880886cf7..9802d5d911aa 100644
--- a/Documentation/devicetree/bindings/phy/phy-miphy365x.txt
+++ b/Documentation/devicetree/bindings/phy/phy-miphy365x.txt
@@ -6,8 +6,10 @@ for SATA and PCIe.
Required properties (controller (parent) node):
- compatible : Should be "st,miphy365x-phy"
-- st,syscfg : Should be a phandle of the system configuration register group
- which contain the SATA, PCIe mode setting bits
+- st,syscfg : Phandle / integer array property. Phandle of sysconfig group
+ containing the miphy registers and integer array should contain
+ an entry for each port sub-node, specifying the control
+ register offset inside the sysconfig group.
Required nodes : A sub-node is required for each channel the controller
provides. Address range information including the usual
@@ -26,7 +28,6 @@ Required properties (port (child) node):
registers filled in "reg":
- sata: For SATA devices
- pcie: For PCIe devices
- - syscfg: To specify the syscfg based config register
Optional properties (port (child) node):
- st,sata-gen : Generation of locally attached SATA IP. Expected values
@@ -39,20 +40,20 @@ Example:
miphy365x_phy: miphy365x@fe382000 {
compatible = "st,miphy365x-phy";
- st,syscfg = <&syscfg_rear>;
+ st,syscfg = <&syscfg_rear 0x824 0x828>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
phy_port0: port@fe382000 {
- reg = <0xfe382000 0x100>, <0xfe394000 0x100>, <0x824 0x4>;
- reg-names = "sata", "pcie", "syscfg";
+ reg = <0xfe382000 0x100>, <0xfe394000 0x100>;
+ reg-names = "sata", "pcie";
#phy-cells = <1>;
st,sata-gen = <3>;
};
phy_port1: port@fe38a000 {
- reg = <0xfe38a000 0x100>, <0xfe804000 0x100>, <0x828 0x4>;;
+ reg = <0xfe38a000 0x100>, <0xfe804000 0x100>;;
reg-names = "sata", "pcie", "syscfg";
#phy-cells = <1>;
st,pcie-tx-pol-inv;
diff --git a/Documentation/devicetree/bindings/phy/phy-stih407-usb.txt b/Documentation/devicetree/bindings/phy/phy-stih407-usb.txt
index 1ef8228db73b..de6a706abcdb 100644
--- a/Documentation/devicetree/bindings/phy/phy-stih407-usb.txt
+++ b/Documentation/devicetree/bindings/phy/phy-stih407-usb.txt
@@ -5,10 +5,7 @@ host controllers (when controlling usb2/1.1 devices) available on STiH407 SoC fa
Required properties:
- compatible : should be "st,stih407-usb2-phy"
-- reg : contain the offset and length of the system configuration registers
- used as glue logic to control & parameter phy
-- reg-names : the names of the system configuration registers in "reg", should be "param" and "reg"
-- st,syscfg : sysconfig register to manage phy parameter at driver level
+- st,syscfg : phandle of sysconfig bank plus integer array containing phyparam and phyctrl register offsets
- resets : list of phandle and reset specifier pairs. There should be two entries, one
for the whole phy and one for the port
- reset-names : list of reset signal names. Should be "global" and "port"
@@ -19,11 +16,8 @@ Example:
usb2_picophy0: usbpicophy@f8 {
compatible = "st,stih407-usb2-phy";
- reg = <0xf8 0x04>, /* syscfg 5062 */
- <0xf4 0x04>; /* syscfg 5061 */
- reg-names = "param", "ctrl";
#phy-cells = <0>;
- st,syscfg = <&syscfg_core>;
+ st,syscfg = <&syscfg_core 0x100 0xf4>;
resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
<&picophyreset STIH407_PICOPHY0_RESET>;
reset-names = "global", "port";
diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi
index 3e31d32133b8..d4a8f843cdc8 100644
--- a/arch/arm/boot/dts/stih407-family.dtsi
+++ b/arch/arm/boot/dts/stih407-family.dtsi
@@ -274,5 +274,14 @@
status = "disabled";
};
+
+ usb2_picophy0: phy1 {
+ compatible = "st,stih407-usb2-phy";
+ #phy-cells = <0>;
+ st,syscfg = <&syscfg_core 0x100 0xf4>;
+ resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
+ <&picophyreset STIH407_PICOPHY0_RESET>;
+ reset-names = "global", "port";
+ };
};
};
diff --git a/arch/arm/boot/dts/stih410.dtsi b/arch/arm/boot/dts/stih410.dtsi
index c05627eb717d..37995f4739d2 100644
--- a/arch/arm/boot/dts/stih410.dtsi
+++ b/arch/arm/boot/dts/stih410.dtsi
@@ -10,5 +10,75 @@
#include "stih407-family.dtsi"
#include "stih410-pinctrl.dtsi"
/ {
+ soc {
+ usb2_picophy1: phy2 {
+ compatible = "st,stih407-usb2-phy";
+ #phy-cells = <0>;
+ st,syscfg = <&syscfg_core 0xf8 0xf4>;
+ resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
+ <&picophyreset STIH407_PICOPHY0_RESET>;
+ reset-names = "global", "port";
+ };
+ usb2_picophy2: phy3 {
+ compatible = "st,stih407-usb2-phy";
+ #phy-cells = <0>;
+ st,syscfg = <&syscfg_core 0xfc 0xf4>;
+ resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
+ <&picophyreset STIH407_PICOPHY1_RESET>;
+ reset-names = "global", "port";
+ };
+
+ ohci0: usb@9a03c00 {
+ compatible = "st,st-ohci-300x";
+ reg = <0x9a03c00 0x100>;
+ interrupts = <GIC_SPI 180 IRQ_TYPE_NONE>;
+ clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>;
+ resets = <&powerdown STIH407_USB2_PORT0_POWERDOWN>,
+ <&softreset STIH407_USB2_PORT0_SOFTRESET>;
+ reset-names = "power", "softreset";
+ phys = <&usb2_picophy1>;
+ phy-names = "usb";
+ };
+
+ ehci0: usb@9a03e00 {
+ compatible = "st,st-ehci-300x";
+ reg = <0x9a03e00 0x100>;
+ interrupts = <GIC_SPI 151 IRQ_TYPE_NONE>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb0>;
+ clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>;
+ resets = <&powerdown STIH407_USB2_PORT0_POWERDOWN>,
+ <&softreset STIH407_USB2_PORT0_SOFTRESET>;
+ reset-names = "power", "softreset";
+ phys = <&usb2_picophy1>;
+ phy-names = "usb";
+ };
+
+ ohci1: usb@9a83c00 {
+ compatible = "st,st-ohci-300x";
+ reg = <0x9a83c00 0x100>;
+ interrupts = <GIC_SPI 181 IRQ_TYPE_NONE>;
+ clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>;
+ resets = <&powerdown STIH407_USB2_PORT1_POWERDOWN>,
+ <&softreset STIH407_USB2_PORT1_SOFTRESET>;
+ reset-names = "power", "softreset";
+ phys = <&usb2_picophy2>;
+ phy-names = "usb";
+ };
+
+ ehci1: usb@9a83e00 {
+ compatible = "st,st-ehci-300x";
+ reg = <0x9a83e00 0x100>;
+ interrupts = <GIC_SPI 153 IRQ_TYPE_NONE>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb1>;
+ clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>;
+ resets = <&powerdown STIH407_USB2_PORT1_POWERDOWN>,
+ <&softreset STIH407_USB2_PORT1_SOFTRESET>;
+ reset-names = "power", "softreset";
+ phys = <&usb2_picophy2>;
+ phy-names = "usb";
+ };
+ };
};
diff --git a/arch/arm/boot/dts/stih415.dtsi b/arch/arm/boot/dts/stih415.dtsi
index 9198c12765ea..19b019b5f30e 100644
--- a/arch/arm/boot/dts/stih415.dtsi
+++ b/arch/arm/boot/dts/stih415.dtsi
@@ -153,8 +153,8 @@
compatible = "st,stih415-dwmac", "snps,dwmac", "snps,dwmac-3.610";
status = "disabled";
- reg = <0xfe810000 0x8000>, <0x148 0x4>;
- reg-names = "stmmaceth", "sti-ethconf";
+ reg = <0xfe810000 0x8000>;
+ reg-names = "stmmaceth";
interrupts = <0 147 0>, <0 148 0>, <0 149 0>;
interrupt-names = "macirq", "eth_wake_irq", "eth_lpi";
@@ -165,7 +165,7 @@
snps,mixed-burst;
snps,force_sf_dma_mode;
- st,syscon = <&syscfg_rear>;
+ st,syscon = <&syscfg_rear 0x148>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mii0>;
@@ -177,8 +177,8 @@
device_type = "network";
compatible = "st,stih415-dwmac", "snps,dwmac", "snps,dwmac-3.610";
status = "disabled";
- reg = <0xfef08000 0x8000>, <0x74 0x4>;
- reg-names = "stmmaceth", "sti-ethconf";
+ reg = <0xfef08000 0x8000>;
+ reg-names = "stmmaceth";
interrupts = <0 150 0>, <0 151 0>, <0 152 0>;
interrupt-names = "macirq", "eth_wake_irq", "eth_lpi";
@@ -186,7 +186,7 @@
snps,mixed-burst;
snps,force_sf_dma_mode;
- st,syscon = <&syscfg_sbc>;
+ st,syscon = <&syscfg_sbc 0x74>;
resets = <&softreset STIH415_ETH1_SOFTRESET>;
reset-names = "stmmaceth";
diff --git a/arch/arm/boot/dts/stih416.dtsi b/arch/arm/boot/dts/stih416.dtsi
index fad9073ddeed..ea28ebadab1a 100644
--- a/arch/arm/boot/dts/stih416.dtsi
+++ b/arch/arm/boot/dts/stih416.dtsi
@@ -163,8 +163,8 @@
device_type = "network";
compatible = "st,stih416-dwmac", "snps,dwmac", "snps,dwmac-3.710";
status = "disabled";
- reg = <0xfe810000 0x8000>, <0x8bc 0x4>;
- reg-names = "stmmaceth", "sti-ethconf";
+ reg = <0xfe810000 0x8000>;
+ reg-names = "stmmaceth";
interrupts = <0 133 0>, <0 134 0>, <0 135 0>;
interrupt-names = "macirq", "eth_wake_irq", "eth_lpi";
@@ -172,7 +172,7 @@
snps,pbl = <32>;
snps,mixed-burst;
- st,syscon = <&syscfg_rear>;
+ st,syscon = <&syscfg_rear 0x8bc>;
resets = <&softreset STIH416_ETH0_SOFTRESET>;
reset-names = "stmmaceth";
pinctrl-names = "default";
@@ -185,15 +185,15 @@
device_type = "network";
compatible = "st,stih416-dwmac", "snps,dwmac", "snps,dwmac-3.710";
status = "disabled";
- reg = <0xfef08000 0x8000>, <0x7f0 0x4>;
- reg-names = "stmmaceth", "sti-ethconf";
+ reg = <0xfef08000 0x8000>;
+ reg-names = "stmmaceth";
interrupts = <0 136 0>, <0 137 0>, <0 138 0>;
interrupt-names = "macirq", "eth_wake_irq", "eth_lpi";
snps,pbl = <32>;
snps,mixed-burst;
- st,syscon = <&syscfg_sbc>;
+ st,syscon = <&syscfg_sbc 0x7f0>;
resets = <&softreset STIH416_ETH1_SOFTRESET>;
reset-names = "stmmaceth";
@@ -283,21 +283,21 @@
miphy365x_phy: phy@fe382000 {
compatible = "st,miphy365x-phy";
- st,syscfg = <&syscfg_rear>;
+ st,syscfg = <&syscfg_rear 0x824 0x828>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
phy_port0: port@fe382000 {
#phy-cells = <1>;
- reg = <0xfe382000 0x100>, <0xfe394000 0x100>, <0x824 0x4>;
- reg-names = "sata", "pcie", "syscfg";
+ reg = <0xfe382000 0x100>, <0xfe394000 0x100>;
+ reg-names = "sata", "pcie";
};
phy_port1: port@fe38a000 {
#phy-cells = <1>;
- reg = <0xfe38a000 0x100>, <0xfe804000 0x100>, <0x828 0x4>;
- reg-names = "sata", "pcie", "syscfg";
+ reg = <0xfe38a000 0x100>, <0xfe804000 0x100>;
+ reg-names = "sata", "pcie";
};
};
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index bc393b7e5ece..444685c44055 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -456,6 +456,7 @@ CONFIG_OMAP_USB2=y
CONFIG_TI_PIPE3=y
CONFIG_PHY_MIPHY365X=y
CONFIG_PHY_STIH41X_USB=y
+CONFIG_PHY_STIH407_USB=y
CONFIG_PHY_SUN4I_USB=y
CONFIG_EXT4_FS=y
CONFIG_AUTOFS4_FS=y
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sti.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sti.c
index 056b358b4a72..bb6e2dc61bec 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sti.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sti.c
@@ -122,7 +122,7 @@ struct sti_dwmac {
bool ext_phyclk; /* Clock from external PHY */
u32 tx_retime_src; /* TXCLK Retiming*/
struct clk *clk; /* PHY clock */
- int ctrl_reg; /* GMAC glue-logic control register */
+ u32 ctrl_reg; /* GMAC glue-logic control register */
int clk_sel_reg; /* GMAC ext clk selection register */
struct device *dev;
struct regmap *regmap;
@@ -285,11 +285,6 @@ static int sti_dwmac_parse_data(struct sti_dwmac *dwmac,
if (!np)
return -EINVAL;
- res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "sti-ethconf");
- if (!res)
- return -ENODATA;
- dwmac->ctrl_reg = res->start;
-
/* clk selection from extra syscfg register */
dwmac->clk_sel_reg = -ENXIO;
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "sti-clkconf");
@@ -300,6 +295,12 @@ static int sti_dwmac_parse_data(struct sti_dwmac *dwmac,
if (IS_ERR(regmap))
return PTR_ERR(regmap);
+ err = of_property_read_u32_index(np, "st,syscon", 1, &dwmac->ctrl_reg);
+ if (err) {
+ dev_err(dev, "Can't get sysconfig ctrl offset (%d)\n", err);
+ return err;
+ }
+
dwmac->dev = dev;
dwmac->interface = of_get_phy_mode(np);
dwmac->regmap = regmap;
diff --git a/drivers/phy/phy-miphy365x.c b/drivers/phy/phy-miphy365x.c
index 6ab43a814ad2..6c80154e8bff 100644
--- a/drivers/phy/phy-miphy365x.c
+++ b/drivers/phy/phy-miphy365x.c
@@ -141,7 +141,7 @@ struct miphy365x_phy {
bool pcie_tx_pol_inv;
bool sata_tx_pol_inv;
u32 sata_gen;
- u64 ctrlreg;
+ u32 ctrlreg;
u8 type;
};
@@ -179,7 +179,7 @@ static int miphy365x_set_path(struct miphy365x_phy *miphy_phy,
bool sata = (miphy_phy->type == MIPHY_TYPE_SATA);
return regmap_update_bits(miphy_dev->regmap,
- (unsigned int)miphy_phy->ctrlreg,
+ miphy_phy->ctrlreg,
SYSCFG_SELECT_SATA_MASK,
sata << SYSCFG_SELECT_SATA_POS);
}
@@ -445,7 +445,6 @@ int miphy365x_get_addr(struct device *dev, struct miphy365x_phy *miphy_phy,
{
struct device_node *phynode = miphy_phy->phy->dev.of_node;
const char *name;
- const __be32 *taddr;
int type = miphy_phy->type;
int ret;
@@ -455,22 +454,6 @@ int miphy365x_get_addr(struct device *dev, struct miphy365x_phy *miphy_phy,
return ret;
}
- if (!strncmp(name, "syscfg", 6)) {
- taddr = of_get_address(phynode, index, NULL, NULL);
- if (!taddr) {
- dev_err(dev, "failed to fetch syscfg address\n");
- return -EINVAL;
- }
-
- miphy_phy->ctrlreg = of_translate_address(phynode, taddr);
- if (miphy_phy->ctrlreg == OF_BAD_ADDR) {
- dev_err(dev, "failed to translate syscfg address\n");
- return -EINVAL;
- }
-
- return 0;
- }
-
if (!((!strncmp(name, "sata", 4) && type == MIPHY_TYPE_SATA) ||
(!strncmp(name, "pcie", 4) && type == MIPHY_TYPE_PCIE)))
return 0;
@@ -606,7 +589,15 @@ static int miphy365x_probe(struct platform_device *pdev)
return ret;
phy_set_drvdata(phy, miphy_dev->phys[port]);
+
port++;
+ /* sysconfig offsets are indexed from 1 */
+ ret = of_property_read_u32_index(np, "st,syscfg", port,
+ &miphy_phy->ctrlreg);
+ if (ret) {
+ dev_err(&pdev->dev, "No sysconfig offset found\n");
+ return ret;
+ }
}
provider = devm_of_phy_provider_register(&pdev->dev, miphy365x_xlate);
diff --git a/drivers/phy/phy-stih407-usb.c b/drivers/phy/phy-stih407-usb.c
index 74f0fab3cd8a..1d5ae5f8ef69 100644
--- a/drivers/phy/phy-stih407-usb.c
+++ b/drivers/phy/phy-stih407-usb.c
@@ -22,6 +22,9 @@
#include <linux/mfd/syscon.h>
#include <linux/phy/phy.h>
+#define PHYPARAM_REG 1
+#define PHYCTRL_REG 2
+
/* Default PHY_SEL and REFCLKSEL configuration */
#define STIH407_USB_PICOPHY_CTRL_PORT_CONF 0x6
#define STIH407_USB_PICOPHY_CTRL_PORT_MASK 0x1f
@@ -93,7 +96,7 @@ static int stih407_usb2_picophy_probe(struct platform_device *pdev)
struct device_node *np = dev->of_node;
struct phy_provider *phy_provider;
struct phy *phy;
- struct resource *res;
+ int ret;
phy_dev = devm_kzalloc(dev, sizeof(*phy_dev), GFP_KERNEL);
if (!phy_dev)
@@ -123,19 +126,19 @@ static int stih407_usb2_picophy_probe(struct platform_device *pdev)
return PTR_ERR(phy_dev->regmap);
}
- res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ctrl");
- if (!res) {
- dev_err(dev, "No ctrl reg found\n");
- return -ENXIO;
+ ret = of_property_read_u32_index(np, "st,syscfg", PHYPARAM_REG,
+ &phy_dev->param);
+ if (ret) {
+ dev_err(dev, "can't get phyparam offset (%d)\n", ret);
+ return ret;
}
- phy_dev->ctrl = res->start;
- res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "param");
- if (!res) {
- dev_err(dev, "No param reg found\n");
- return -ENXIO;
+ ret = of_property_read_u32_index(np, "st,syscfg", PHYCTRL_REG,
+ &phy_dev->ctrl);
+ if (ret) {
+ dev_err(dev, "can't get phyctrl offset (%d)\n", ret);
+ return ret;
}
- phy_dev->param = res->start;
phy = devm_phy_create(dev, NULL, &stih407_usb2_picophy_data);
if (IS_ERR(phy)) {
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.