diff options
| -rw-r--r-- | drivers/net/ethernet/mellanox/mlxsw/reg.h | 33 | ||||
| -rw-r--r-- | drivers/net/ethernet/mellanox/mlxsw/spectrum_dcb.c | 17 | ||||
| -rwxr-xr-x | tools/testing/selftests/drivers/net/mlxsw/qos_defprio.sh | 176 | ||||
| -rw-r--r-- | tools/testing/selftests/net/forwarding/lib.sh | 23 |
4 files changed, 249 insertions, 0 deletions
diff --git a/drivers/net/ethernet/mellanox/mlxsw/reg.h b/drivers/net/ethernet/mellanox/mlxsw/reg.h index 2b8b4ed6bbef..fd59280cf979 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/reg.h +++ b/drivers/net/ethernet/mellanox/mlxsw/reg.h @@ -3748,6 +3748,38 @@ mlxsw_reg_qpdsm_prio_pack(char *payload, unsigned short prio, u8 dscp) mlxsw_reg_qpdsm_prio_entry_color2_dscp_set(payload, prio, dscp); } +/* QPDP - QoS Port DSCP to Priority Mapping Register + * ------------------------------------------------- + * This register controls the port default Switch Priority and Color. The + * default Switch Priority and Color are used for frames where the trust state + * uses default values. All member ports of a LAG should be configured with the + * same default values. + */ +#define MLXSW_REG_QPDP_ID 0x4007 +#define MLXSW_REG_QPDP_LEN 0x8 + +MLXSW_REG_DEFINE(qpdp, MLXSW_REG_QPDP_ID, MLXSW_REG_QPDP_LEN); + +/* reg_qpdp_local_port + * Local Port. Supported for data packets from CPU port. + * Access: Index + */ +MLXSW_ITEM32(reg, qpdp, local_port, 0x00, 16, 8); + +/* reg_qpdp_switch_prio + * Default port Switch Priority (default 0) + * Access: RW + */ +MLXSW_ITEM32(reg, qpdp, switch_prio, 0x04, 0, 4); + +static inline void mlxsw_reg_qpdp_pack(char *payload, u8 local_port, + u8 switch_prio) +{ + MLXSW_REG_ZERO(qpdp, payload); + mlxsw_reg_qpdp_local_port_set(payload, local_port); + mlxsw_reg_qpdp_switch_prio_set(payload, switch_prio); +} + /* QPDPM - QoS Port DSCP to Priority Mapping Register * -------------------------------------------------- * This register controls the mapping from DSCP field to @@ -10580,6 +10612,7 @@ static const struct mlxsw_reg_info *mlxsw_reg_infos[] = { MLXSW_REG(qeec), MLXSW_REG(qrwe), MLXSW_REG(qpdsm), + MLXSW_REG(qpdp), MLXSW_REG(qpdpm), MLXSW_REG(qtctm), MLXSW_REG(qpsc), diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_dcb.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_dcb.c index fe3bbba90659..db66f2b56a6d 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_dcb.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_dcb.c @@ -369,6 +369,17 @@ err_update_qrwe: } static int +mlxsw_sp_port_dcb_app_update_qpdp(struct mlxsw_sp_port *mlxsw_sp_port, + u8 default_prio) +{ + struct mlxsw_sp *mlxsw_sp = mlxsw_sp_port->mlxsw_sp; + char qpdp_pl[MLXSW_REG_QPDP_LEN]; + + mlxsw_reg_qpdp_pack(qpdp_pl, mlxsw_sp_port->local_port, default_prio); + return mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(qpdp), qpdp_pl); +} + +static int mlxsw_sp_port_dcb_app_update_qpdpm(struct mlxsw_sp_port *mlxsw_sp_port, struct dcb_ieee_app_dscp_map *map) { @@ -405,6 +416,12 @@ static int mlxsw_sp_port_dcb_app_update(struct mlxsw_sp_port *mlxsw_sp_port) int err; default_prio = mlxsw_sp_port_dcb_app_default_prio(mlxsw_sp_port); + err = mlxsw_sp_port_dcb_app_update_qpdp(mlxsw_sp_port, default_prio); + if (err) { + netdev_err(mlxsw_sp_port->dev, "Couldn't configure port default priority\n"); + return err; + } + have_dscp = mlxsw_sp_port_dcb_app_prio_dscp_map(mlxsw_sp_port, &prio_map); diff --git a/tools/testing/selftests/drivers/net/mlxsw/qos_defprio.sh b/tools/testing/selftests/drivers/net/mlxsw/qos_defprio.sh new file mode 100755 index 000000000000..eff6393ce974 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/qos_defprio.sh @@ -0,0 +1,176 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +# Test for port-default priority. Non-IP packets ingress $swp1 and are +# prioritized according to the default priority specified at the port. +# rx_octets_prio_* counters are used to verify the prioritization. +# +# +-----------------------+ +# | H1 | +# | + $h1 | +# | | 192.0.2.1/28 | +# +----|------------------+ +# | +# +----|------------------+ +# | SW | | +# | + $swp1 | +# | 192.0.2.2/28 | +# | APP=<prio>,1,0 | +# +-----------------------+ + +ALL_TESTS=" + ping_ipv4 + test_defprio +" + +lib_dir=$(dirname $0)/../../../net/forwarding + +NUM_NETIFS=2 +: ${HIT_TIMEOUT:=1000} # ms +source $lib_dir/lib.sh + +declare -a APP + +defprio_install() +{ + local dev=$1; shift + local prio=$1; shift + local app="app=$prio,1,0" + + lldptool -T -i $dev -V APP $app >/dev/null + lldpad_app_wait_set $dev + APP[$prio]=$app +} + +defprio_uninstall() +{ + local dev=$1; shift + local prio=$1; shift + local app=${APP[$prio]} + + lldptool -T -i $dev -V APP -d $app >/dev/null + lldpad_app_wait_del + unset APP[$prio] +} + +defprio_flush() +{ + local dev=$1; shift + local prio + + if ((${#APP[@]})); then + lldptool -T -i $dev -V APP -d ${APP[@]} >/dev/null + fi + lldpad_app_wait_del + APP=() +} + +h1_create() +{ + simple_if_init $h1 192.0.2.1/28 +} + +h1_destroy() +{ + simple_if_fini $h1 192.0.2.1/28 +} + +switch_create() +{ + ip link set dev $swp1 up + ip addr add dev $swp1 192.0.2.2/28 +} + +switch_destroy() +{ + defprio_flush $swp1 + ip addr del dev $swp1 192.0.2.2/28 + ip link set dev $swp1 down +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + swp1=${NETIFS[p2]} + + vrf_prepare + + h1_create + switch_create +} + +cleanup() +{ + pre_cleanup + + switch_destroy + h1_destroy + + vrf_cleanup +} + +ping_ipv4() +{ + ping_test $h1 192.0.2.2 +} + +wait_for_packets() +{ + local t0=$1; shift + local prio_observe=$1; shift + + local t1=$(ethtool_stats_get $swp1 rx_frames_prio_$prio_observe) + local delta=$((t1 - t0)) + echo $delta + ((delta >= 10)) +} + +__test_defprio() +{ + local prio_install=$1; shift + local prio_observe=$1; shift + local delta + local key + local i + + RET=0 + + defprio_install $swp1 $prio_install + + local t0=$(ethtool_stats_get $swp1 rx_frames_prio_$prio_observe) + mausezahn -q $h1 -d 100m -c 10 -t arp reply + delta=$(busywait "$HIT_TIMEOUT" wait_for_packets $t0 $prio_observe) + + check_err $? "Default priority $prio_install/$prio_observe: Expected to capture 10 packets, got $delta." + log_test "Default priority $prio_install/$prio_observe" + + defprio_uninstall $swp1 $prio_install +} + +test_defprio() +{ + local prio + + for prio in {0..7}; do + __test_defprio $prio $prio + done + + defprio_install $swp1 3 + __test_defprio 0 3 + __test_defprio 1 3 + __test_defprio 2 3 + __test_defprio 4 4 + __test_defprio 5 5 + __test_defprio 6 6 + __test_defprio 7 7 + defprio_uninstall $swp1 3 +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/net/forwarding/lib.sh b/tools/testing/selftests/net/forwarding/lib.sh index a0b09bb6995e..8dc5fac98cbc 100644 --- a/tools/testing/selftests/net/forwarding/lib.sh +++ b/tools/testing/selftests/net/forwarding/lib.sh @@ -225,6 +225,29 @@ log_info() echo "INFO: $msg" } +busywait() +{ + local timeout=$1; shift + + local start_time="$(date -u +%s%3N)" + while true + do + local out + out=$("$@") + local ret=$? + if ((!ret)); then + echo -n "$out" + return 0 + fi + + local current_time="$(date -u +%s%3N)" + if ((current_time - start_time > timeout)); then + echo -n "$out" + return 1 + fi + done +} + setup_wait_dev() { local dev=$1; shift |