diff options
5 files changed, 60 insertions, 59 deletions
diff --git a/Documentation/devicetree/bindings/hwmon/adt7475.yaml b/Documentation/devicetree/bindings/hwmon/adt7475.yaml index ad0ec9f35bd8..7d9c083632b9 100644 --- a/Documentation/devicetree/bindings/hwmon/adt7475.yaml +++ b/Documentation/devicetree/bindings/hwmon/adt7475.yaml @@ -39,17 +39,7 @@ properties: reg: maxItems: 1 -patternProperties: - "^adi,bypass-attenuator-in[0-4]$": - description: | - Configures bypassing the individual voltage input attenuator. If - set to 1 the attenuator is bypassed if set to 0 the attenuator is - not bypassed. If the property is absent then the attenuator - retains it's configuration from the bios/bootloader. - $ref: /schemas/types.yaml#/definitions/uint32 - enum: [0, 1] - - "^adi,pwm-active-state$": + adi,pwm-active-state: description: | Integer array, represents the active state of the pwm outputs If set to 0 the pwm uses a logic low output for 100% duty cycle. If set to 1 the pwm @@ -61,6 +51,16 @@ patternProperties: enum: [0, 1] default: 1 +patternProperties: + "^adi,bypass-attenuator-in[0-4]$": + description: | + Configures bypassing the individual voltage input attenuator. If + set to 1 the attenuator is bypassed if set to 0 the attenuator is + not bypassed. If the property is absent then the attenuator + retains it's configuration from the bios/bootloader. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml index 5272b6f284ba..dcd63908aeae 100644 --- a/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml +++ b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml @@ -77,6 +77,34 @@ properties: Type-C spec states minimum CC pin debounce of 100 ms and maximum of 200 ms. However, some solutions might need more than 200 ms. + refclk-dig: + type: object + description: | + WIZ node should have subnode for refclk_dig to select the reference + clock source for the reference clock used in the PHY and PMA digital + logic. + properties: + clocks: + minItems: 2 + maxItems: 4 + description: Phandle to two (Torrent) or four (Sierra) clock nodes representing + the inputs to refclk_dig + + "#clock-cells": + const: 0 + + assigned-clocks: + maxItems: 1 + + assigned-clock-parents: + maxItems: 1 + + required: + - clocks + - "#clock-cells" + - assigned-clocks + - assigned-clock-parents + patternProperties: "^pll[0|1]-refclk$": type: object @@ -121,34 +149,6 @@ patternProperties: - clocks - "#clock-cells" - "^refclk-dig$": - type: object - description: | - WIZ node should have subnode for refclk_dig to select the reference - clock source for the reference clock used in the PHY and PMA digital - logic. - properties: - clocks: - minItems: 2 - maxItems: 4 - description: Phandle to two (Torrent) or four (Sierra) clock nodes representing - the inputs to refclk_dig - - "#clock-cells": - const: 0 - - assigned-clocks: - maxItems: 1 - - assigned-clock-parents: - maxItems: 1 - - required: - - clocks - - "#clock-cells" - - assigned-clocks - - assigned-clock-parents - "^serdes@[0-9a-f]+$": type: object description: | diff --git a/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml b/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml index 12b8963615c3..c2e8c54e5311 100644 --- a/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml +++ b/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml @@ -36,12 +36,12 @@ properties: switching frequency must be one of following corresponding value 1.1MHz, 1.65MHz, 2.2MHz, 2.75MHz - patternProperties: - "^ldo[1-4]$": + ldortc: type: object $ref: regulator.yaml# - "^ldortc$": + patternProperties: + "^ldo[1-4]$": type: object $ref: regulator.yaml# diff --git a/Documentation/devicetree/bindings/regulator/nxp,pf8x00-regulator.yaml b/Documentation/devicetree/bindings/regulator/nxp,pf8x00-regulator.yaml index 8761437ed8ad..aabf50f5b39e 100644 --- a/Documentation/devicetree/bindings/regulator/nxp,pf8x00-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/nxp,pf8x00-regulator.yaml @@ -83,7 +83,8 @@ properties: unevaluatedProperties: false - "^vsnvs$": + properties: + vsnvs: type: object $ref: regulator.yaml# description: diff --git a/Documentation/devicetree/bindings/spi/spi-controller.yaml b/Documentation/devicetree/bindings/spi/spi-controller.yaml index faef4f6f55b8..8246891602e7 100644 --- a/Documentation/devicetree/bindings/spi/spi-controller.yaml +++ b/Documentation/devicetree/bindings/spi/spi-controller.yaml @@ -79,22 +79,7 @@ properties: description: The SPI controller acts as a slave, instead of a master. -allOf: - - if: - not: - required: - - spi-slave - then: - properties: - "#address-cells": - const: 1 - else: - properties: - "#address-cells": - const: 0 - -patternProperties: - "^slave$": + slave: type: object properties: @@ -105,6 +90,7 @@ patternProperties: required: - compatible +patternProperties: "^.*@[0-9a-f]+$": type: object @@ -180,6 +166,20 @@ patternProperties: - compatible - reg +allOf: + - if: + not: + required: + - spi-slave + then: + properties: + "#address-cells": + const: 1 + else: + properties: + "#address-cells": + const: 0 + additionalProperties: true examples: |