diff options
| -rw-r--r-- | Documentation/devicetree/bindings/sound/cs4271.txt | 12 | ||||
| -rw-r--r-- | include/sound/cs4271.h | 15 | ||||
| -rw-r--r-- | sound/soc/codecs/cs4271.c | 34 |
3 files changed, 61 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/sound/cs4271.txt b/Documentation/devicetree/bindings/sound/cs4271.txt index a850fb9c88ea..e2cd1d7539e5 100644 --- a/Documentation/devicetree/bindings/sound/cs4271.txt +++ b/Documentation/devicetree/bindings/sound/cs4271.txt @@ -20,6 +20,18 @@ Optional properties: !RESET pin - cirrus,amuteb-eq-bmutec: When given, the Codec's AMUTEB=BMUTEC flag is enabled. + - cirrus,enable-soft-reset: + The CS4271 requires its LRCLK and MCLK to be stable before its RESET + line is de-asserted. That also means that clocks cannot be changed + without putting the chip back into hardware reset, which also requires + a complete re-initialization of all registers. + + One (undocumented) workaround is to assert and de-assert the PDN bit + in the MODE2 register. This workaround can be enabled with this DT + property. + + Note that this is not needed in case the clocks are stable + throughout the entire runtime of the codec. Examples: diff --git a/include/sound/cs4271.h b/include/sound/cs4271.h index dd8c48d14ed9..70f45355acaa 100644 --- a/include/sound/cs4271.h +++ b/include/sound/cs4271.h @@ -20,6 +20,21 @@ struct cs4271_platform_data { int gpio_nreset; /* GPIO driving Reset pin, if any */ bool amutec_eq_bmutec; /* flag to enable AMUTEC=BMUTEC */ + + /* + * The CS4271 requires its LRCLK and MCLK to be stable before its RESET + * line is de-asserted. That also means that clocks cannot be changed + * without putting the chip back into hardware reset, which also requires + * a complete re-initialization of all registers. + * + * One (undocumented) workaround is to assert and de-assert the PDN bit + * in the MODE2 register. This workaround can be enabled with the + * following flag. + * + * Note that this is not needed in case the clocks are stable + * throughout the entire runtime of the codec. + */ + bool enable_soft_reset; }; #endif /* __CS4271_H */ diff --git a/sound/soc/codecs/cs4271.c b/sound/soc/codecs/cs4271.c index ac8742a1f25a..2415a4118dbd 100644 --- a/sound/soc/codecs/cs4271.c +++ b/sound/soc/codecs/cs4271.c @@ -167,6 +167,8 @@ struct cs4271_private { int gpio_nreset; /* GPIO that disable serial bus, if any */ int gpio_disable; + /* enable soft reset workaround */ + bool enable_soft_reset; }; /* @@ -325,6 +327,33 @@ static int cs4271_hw_params(struct snd_pcm_substream *substream, int i, ret; unsigned int ratio, val; + if (cs4271->enable_soft_reset) { + /* + * Put the codec in soft reset and back again in case it's not + * currently streaming data. This way of bringing the codec in + * sync to the current clocks is not explicitly documented in + * the data sheet, but it seems to work fine, and in contrast + * to a read hardware reset, we don't have to sync back all + * registers every time. + */ + + if ((substream->stream == SNDRV_PCM_STREAM_PLAYBACK && + !dai->capture_active) || + (substream->stream == SNDRV_PCM_STREAM_CAPTURE && + !dai->playback_active)) { + ret = snd_soc_update_bits(codec, CS4271_MODE2, + CS4271_MODE2_PDN, + CS4271_MODE2_PDN); + if (ret < 0) + return ret; + + ret = snd_soc_update_bits(codec, CS4271_MODE2, + CS4271_MODE2_PDN, 0); + if (ret < 0) + return ret; + } + } + cs4271->rate = params_rate(params); /* Configure DAC */ @@ -484,6 +513,10 @@ static int cs4271_probe(struct snd_soc_codec *codec) if (of_get_property(codec->dev->of_node, "cirrus,amutec-eq-bmutec", NULL)) amutec_eq_bmutec = true; + + if (of_get_property(codec->dev->of_node, + "cirrus,enable-soft-reset", NULL)) + cs4271->enable_soft_reset = true; } #endif @@ -492,6 +525,7 @@ static int cs4271_probe(struct snd_soc_codec *codec) gpio_nreset = cs4271plat->gpio_nreset; amutec_eq_bmutec = cs4271plat->amutec_eq_bmutec; + cs4271->enable_soft_reset = cs4271plat->enable_soft_reset; } if (gpio_nreset >= 0) |