aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c74
-rw-r--r--drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h1
-rw-r--r--drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c50
-rw-r--r--drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.h3
4 files changed, 112 insertions, 16 deletions
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index 90cbdbe06078..6e978375c439 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -35,6 +35,7 @@
static int hclge_set_mac_mtu(struct hclge_dev *hdev, int new_mps);
static int hclge_init_vlan_config(struct hclge_dev *hdev);
+static void hclge_sync_vlan_filter(struct hclge_dev *hdev);
static int hclge_reset_ae_dev(struct hnae3_ae_dev *ae_dev);
static bool hclge_get_hw_reset_stat(struct hnae3_handle *handle);
static int hclge_set_umv_space(struct hclge_dev *hdev, u16 space_size,
@@ -3539,6 +3540,7 @@ static void hclge_service_task(struct work_struct *work)
hclge_update_port_info(hdev);
hclge_update_link_status(hdev);
hclge_update_vport_alive(hdev);
+ hclge_sync_vlan_filter(hdev);
if (hdev->fd_arfs_expire_timer >= HCLGE_FD_ARFS_EXPIRE_TIMER_INTERVAL) {
hclge_rfs_filter_expire(hdev);
hdev->fd_arfs_expire_timer = 0;
@@ -7742,11 +7744,20 @@ int hclge_set_vlan_filter(struct hnae3_handle *handle, __be16 proto,
bool writen_to_tbl = false;
int ret = 0;
- /* when port based VLAN enabled, we use port based VLAN as the VLAN
- * filter entry. In this case, we don't update VLAN filter table
- * when user add new VLAN or remove exist VLAN, just update the vport
- * VLAN list. The VLAN id in VLAN list won't be writen in VLAN filter
- * table until port based VLAN disabled
+ /* When device is resetting, firmware is unable to handle
+ * mailbox. Just record the vlan id, and remove it after
+ * reset finished.
+ */
+ if (test_bit(HCLGE_STATE_RST_HANDLING, &hdev->state) && is_kill) {
+ set_bit(vlan_id, vport->vlan_del_fail_bmap);
+ return -EBUSY;
+ }
+
+ /* When port base vlan enabled, we use port base vlan as the vlan
+ * filter entry. In this case, we don't update vlan filter table
+ * when user add new vlan or remove exist vlan, just update the vport
+ * vlan list. The vlan id in vlan list will be writen in vlan filter
+ * table until port base vlan disabled
*/
if (handle->port_base_vlan_state == HNAE3_PORT_BASE_VLAN_DISABLE) {
ret = hclge_set_vlan_filter_hw(hdev, proto, vport->vport_id,
@@ -7754,16 +7765,53 @@ int hclge_set_vlan_filter(struct hnae3_handle *handle, __be16 proto,
writen_to_tbl = true;
}
- if (ret)
- return ret;
+ if (!ret) {
+ if (is_kill)
+ hclge_rm_vport_vlan_table(vport, vlan_id, false);
+ else
+ hclge_add_vport_vlan_table(vport, vlan_id,
+ writen_to_tbl);
+ } else if (is_kill) {
+ /* When remove hw vlan filter failed, record the vlan id,
+ * and try to remove it from hw later, to be consistence
+ * with stack
+ */
+ set_bit(vlan_id, vport->vlan_del_fail_bmap);
+ }
+ return ret;
+}
- if (is_kill)
- hclge_rm_vport_vlan_table(vport, vlan_id, false);
- else
- hclge_add_vport_vlan_table(vport, vlan_id,
- writen_to_tbl);
+static void hclge_sync_vlan_filter(struct hclge_dev *hdev)
+{
+#define HCLGE_MAX_SYNC_COUNT 60
- return 0;
+ int i, ret, sync_cnt = 0;
+ u16 vlan_id;
+
+ /* start from vport 1 for PF is always alive */
+ for (i = 0; i < hdev->num_alloc_vport; i++) {
+ struct hclge_vport *vport = &hdev->vport[i];
+
+ vlan_id = find_first_bit(vport->vlan_del_fail_bmap,
+ VLAN_N_VID);
+ while (vlan_id != VLAN_N_VID) {
+ ret = hclge_set_vlan_filter_hw(hdev, htons(ETH_P_8021Q),
+ vport->vport_id, vlan_id,
+ 0, true);
+ if (ret && ret != -EINVAL)
+ return;
+
+ clear_bit(vlan_id, vport->vlan_del_fail_bmap);
+ hclge_rm_vport_vlan_table(vport, vlan_id, false);
+
+ sync_cnt++;
+ if (sync_cnt >= HCLGE_MAX_SYNC_COUNT)
+ return;
+
+ vlan_id = find_first_bit(vport->vlan_del_fail_bmap,
+ VLAN_N_VID);
+ }
+ }
}
static int hclge_set_mac_mtu(struct hclge_dev *hdev, int new_mps)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h
index c55fd61a2e49..8c4e47a4c266 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h
@@ -929,6 +929,7 @@ struct hclge_vport {
u32 bw_limit; /* VSI BW Limit (0 = disabled) */
u8 dwrr;
+ unsigned long vlan_del_fail_bmap[BITS_TO_LONGS(VLAN_N_VID)];
struct hclge_port_base_vlan_config port_base_vlan_cfg;
struct hclge_tx_vtag_cfg txvlan_cfg;
struct hclge_rx_vtag_cfg rxvlan_cfg;
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
index 270447e02fc2..21736e5024be 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c
@@ -1244,6 +1244,7 @@ static int hclgevf_set_vlan_filter(struct hnae3_handle *handle,
#define HCLGEVF_VLAN_MBX_MSG_LEN 5
struct hclgevf_dev *hdev = hclgevf_ae_get_hdev(handle);
u8 msg_data[HCLGEVF_VLAN_MBX_MSG_LEN];
+ int ret;
if (vlan_id > HCLGEVF_MAX_VLAN_ID)
return -EINVAL;
@@ -1251,12 +1252,53 @@ static int hclgevf_set_vlan_filter(struct hnae3_handle *handle,
if (proto != htons(ETH_P_8021Q))
return -EPROTONOSUPPORT;
+ /* When device is resetting, firmware is unable to handle
+ * mailbox. Just record the vlan id, and remove it after
+ * reset finished.
+ */
+ if (test_bit(HCLGEVF_STATE_RST_HANDLING, &hdev->state) && is_kill) {
+ set_bit(vlan_id, hdev->vlan_del_fail_bmap);
+ return -EBUSY;
+ }
+
msg_data[0] = is_kill;
memcpy(&msg_data[1], &vlan_id, sizeof(vlan_id));
memcpy(&msg_data[3], &proto, sizeof(proto));
- return hclgevf_send_mbx_msg(hdev, HCLGE_MBX_SET_VLAN,
- HCLGE_MBX_VLAN_FILTER, msg_data,
- HCLGEVF_VLAN_MBX_MSG_LEN, false, NULL, 0);
+ ret = hclgevf_send_mbx_msg(hdev, HCLGE_MBX_SET_VLAN,
+ HCLGE_MBX_VLAN_FILTER, msg_data,
+ HCLGEVF_VLAN_MBX_MSG_LEN, false, NULL, 0);
+
+ /* When remove hw vlan filter failed, record the vlan id,
+ * and try to remove it from hw later, to be consistence
+ * with stack.
+ */
+ if (is_kill && ret)
+ set_bit(vlan_id, hdev->vlan_del_fail_bmap);
+
+ return ret;
+}
+
+static void hclgevf_sync_vlan_filter(struct hclgevf_dev *hdev)
+{
+#define HCLGEVF_MAX_SYNC_COUNT 60
+ struct hnae3_handle *handle = &hdev->nic;
+ int ret, sync_cnt = 0;
+ u16 vlan_id;
+
+ vlan_id = find_first_bit(hdev->vlan_del_fail_bmap, VLAN_N_VID);
+ while (vlan_id != VLAN_N_VID) {
+ ret = hclgevf_set_vlan_filter(handle, htons(ETH_P_8021Q),
+ vlan_id, true);
+ if (ret)
+ return;
+
+ clear_bit(vlan_id, hdev->vlan_del_fail_bmap);
+ sync_cnt++;
+ if (sync_cnt >= HCLGEVF_MAX_SYNC_COUNT)
+ return;
+
+ vlan_id = find_first_bit(hdev->vlan_del_fail_bmap, VLAN_N_VID);
+ }
}
static int hclgevf_en_hw_strip_rxvtag(struct hnae3_handle *handle, bool enable)
@@ -1797,6 +1839,8 @@ static void hclgevf_service_task(struct work_struct *work)
hclgevf_update_link_mode(hdev);
+ hclgevf_sync_vlan_filter(hdev);
+
hclgevf_deferred_task_schedule(hdev);
clear_bit(HCLGEVF_STATE_SERVICE_SCHED, &hdev->state);
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.h b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.h
index 4f86c870092a..b0ee986bfcc2 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.h
@@ -4,6 +4,7 @@
#ifndef __HCLGEVF_MAIN_H
#define __HCLGEVF_MAIN_H
#include <linux/fs.h>
+#include <linux/if_vlan.h>
#include <linux/types.h>
#include "hclge_mbx.h"
#include "hclgevf_cmd.h"
@@ -270,6 +271,8 @@ struct hclgevf_dev {
u16 *vector_status;
int *vector_irq;
+ unsigned long vlan_del_fail_bmap[BITS_TO_LONGS(VLAN_N_VID)];
+
bool mbx_event_pending;
struct hclgevf_mbx_resp_status mbx_resp; /* mailbox response */
struct hclgevf_mbx_arq_ring arq; /* mailbox async rx queue */