diff options
Diffstat (limited to 'Documentation/ABI')
| -rw-r--r-- | Documentation/ABI/testing/sysfs-bus-iio | 15 | ||||
| -rw-r--r-- | Documentation/ABI/testing/sysfs-bus-iio-adc-stm32 | 18 | ||||
| -rw-r--r-- | Documentation/ABI/testing/sysfs-bus-iio-distance-srf08 | 22 | ||||
| -rw-r--r-- | Documentation/ABI/testing/sysfs-bus-iio-timer-stm32 | 29 |
4 files changed, 82 insertions, 2 deletions
diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio index b8f220f978dd..530809ccfacf 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio +++ b/Documentation/ABI/testing/sysfs-bus-iio @@ -170,6 +170,16 @@ Description: Has all of the equivalent parameters as per voltageY. Units after application of scale and offset are m/s^2. +What: /sys/bus/iio/devices/iio:deviceX/in_gravity_x_raw +What: /sys/bus/iio/devices/iio:deviceX/in_gravity_y_raw +What: /sys/bus/iio/devices/iio:deviceX/in_gravity_z_raw +KernelVersion: 4.11 +Contact: linux-iio@vger.kernel.org +Description: + Gravity in direction x, y or z (may be arbitrarily assigned + but should match other such assignments on device). + Units after application of scale and offset are m/s^2. + What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_x_raw What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_y_raw What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_z_raw @@ -805,7 +815,7 @@ Description: attribute. E.g. if in_voltage0_raw_thresh_rising_value is set to 1200 and in_voltage0_raw_thresh_rising_hysteresis is set to 50. The event will get activated once in_voltage0_raw goes above 1200 and will become - deactived again once the value falls below 1150. + deactivated again once the value falls below 1150. What: /sys/.../events/in_accel_x_raw_roc_rising_value What: /sys/.../events/in_accel_x_raw_roc_falling_value @@ -1245,7 +1255,8 @@ Description: reflectivity of infrared or ultrasound emitted. Often these sensors are unit less and as such conversion to SI units is not possible. Higher proximity measurements - indicate closer objects, and vice versa. + indicate closer objects, and vice versa. Units after + application of scale and offset are meters. What: /sys/.../iio:deviceX/in_illuminance_input What: /sys/.../iio:deviceX/in_illuminance_raw diff --git a/Documentation/ABI/testing/sysfs-bus-iio-adc-stm32 b/Documentation/ABI/testing/sysfs-bus-iio-adc-stm32 new file mode 100644 index 000000000000..efe4c85e3c8b --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-adc-stm32 @@ -0,0 +1,18 @@ +What: /sys/bus/iio/devices/triggerX/trigger_polarity +KernelVersion: 4.11 +Contact: fabrice.gasnier@st.com +Description: + The STM32 ADC can be configured to use external trigger sources + (e.g. timers, pwm or exti gpio). Then, it can be tuned to start + conversions on external trigger by either: + - "rising-edge" + - "falling-edge" + - "both-edges". + Reading returns current trigger polarity. + Writing value before enabling conversions sets trigger polarity. + +What: /sys/bus/iio/devices/triggerX/trigger_polarity_available +KernelVersion: 4.11 +Contact: fabrice.gasnier@st.com +Description: + List all available trigger_polarity settings. diff --git a/Documentation/ABI/testing/sysfs-bus-iio-distance-srf08 b/Documentation/ABI/testing/sysfs-bus-iio-distance-srf08 new file mode 100644 index 000000000000..0a1ca1487fa9 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-distance-srf08 @@ -0,0 +1,22 @@ +What /sys/bus/iio/devices/iio:deviceX/sensor_sensitivity +Date: January 2017 +KernelVersion: 4.11 +Contact: linux-iio@vger.kernel.org +Description: + Show or set the gain boost of the amp, from 0-31 range. + default 31 + +What /sys/bus/iio/devices/iio:deviceX/sensor_max_range +Date: January 2017 +KernelVersion: 4.11 +Contact: linux-iio@vger.kernel.org +Description: + Show or set the maximum range between the sensor and the + first object echoed in meters. Default value is 6.020. + This setting limits the time the driver is waiting for a + echo. + Showing the range of available values is represented as the + minimum value, the step and the maximum value, all enclosed + in square brackets. + Example: + [0.043 0.043 11.008] diff --git a/Documentation/ABI/testing/sysfs-bus-iio-timer-stm32 b/Documentation/ABI/testing/sysfs-bus-iio-timer-stm32 new file mode 100644 index 000000000000..6534a60037ff --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-timer-stm32 @@ -0,0 +1,29 @@ +What: /sys/bus/iio/devices/triggerX/master_mode_available +KernelVersion: 4.11 +Contact: benjamin.gaignard@st.com +Description: + Reading returns the list possible master modes which are: + - "reset" : The UG bit from the TIMx_EGR register is used as trigger output (TRGO). + - "enable" : The Counter Enable signal CNT_EN is used as trigger output. + - "update" : The update event is selected as trigger output. + For instance a master timer can then be used as a prescaler for a slave timer. + - "compare_pulse" : The trigger output send a positive pulse when the CC1IF flag is to be set. + - "OC1REF" : OC1REF signal is used as trigger output. + - "OC2REF" : OC2REF signal is used as trigger output. + - "OC3REF" : OC3REF signal is used as trigger output. + - "OC4REF" : OC4REF signal is used as trigger output. + +What: /sys/bus/iio/devices/triggerX/master_mode +KernelVersion: 4.11 +Contact: benjamin.gaignard@st.com +Description: + Reading returns the current master modes. + Writing set the master mode + +What: /sys/bus/iio/devices/triggerX/sampling_frequency +KernelVersion: 4.11 +Contact: benjamin.gaignard@st.com +Description: + Reading returns the current sampling frequency. + Writing an value different of 0 set and start sampling. + Writing 0 stop sampling. |