diff options
Diffstat (limited to 'Documentation/arm64/booting.rst')
| -rw-r--r-- | Documentation/arm64/booting.rst | 33 |
1 files changed, 32 insertions, 1 deletions
diff --git a/Documentation/arm64/booting.rst b/Documentation/arm64/booting.rst index 4fcc00add117..18b8cc1bf32c 100644 --- a/Documentation/arm64/booting.rst +++ b/Documentation/arm64/booting.rst @@ -277,9 +277,40 @@ Before jumping into the kernel, the following conditions must be met: - SCR_EL3.FGTEn (bit 27) must be initialised to 0b1. + For CPUs with Advanced SIMD and floating point support: + + - If EL3 is present: + + - CPTR_EL3.TFP (bit 10) must be initialised to 0b0. + + - If EL2 is present and the kernel is entered at EL1: + + - CPTR_EL2.TFP (bit 10) must be initialised to 0b0. + + For CPUs with the Scalable Vector Extension (FEAT_SVE) present: + + - if EL3 is present: + + - CPTR_EL3.EZ (bit 8) must be initialised to 0b1. + + - ZCR_EL3.LEN must be initialised to the same value for all CPUs the + kernel is executed on. + + - If the kernel is entered at EL1 and EL2 is present: + + - CPTR_EL2.TZ (bit 8) must be initialised to 0b0. + + - CPTR_EL2.ZEN (bits 17:16) must be initialised to 0b11. + + - ZCR_EL2.LEN must be initialised to the same value for all CPUs the + kernel will execute on. + The requirements described above for CPU mode, caches, MMUs, architected timers, coherency and system registers apply to all CPUs. All CPUs must -enter the kernel in the same exception level. +enter the kernel in the same exception level. Where the values documented +disable traps it is permissible for these traps to be enabled so long as +those traps are handled transparently by higher exception levels as though +the values documented were set. The boot loader is expected to enter the kernel on each CPU in the following manner: |