diff options
Diffstat (limited to 'Documentation/devicetree/bindings/display/msm')
19 files changed, 1067 insertions, 309 deletions
diff --git a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml index 63e585f48789..f2515af8256f 100644 --- a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml +++ b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: MSM Display Port Controller maintainers: - - Kuogee Hsieh <khsieh@codeaurora.org> + - Kuogee Hsieh <quic_khsieh@quicinc.com> description: | Device tree bindings for DisplayPort host controller for MSM targets @@ -17,10 +17,14 @@ properties: compatible: enum: - qcom,sc7180-dp + - qcom,sc7280-dp + - qcom,sc7280-edp - qcom,sc8180x-dp - qcom,sc8180x-edp + - qcom,sm8350-dp reg: + minItems: 4 items: - description: ahb register block - description: aux register block @@ -67,12 +71,29 @@ properties: operating-points-v2: maxItems: 1 + opp-table: true + power-domains: maxItems: 1 + aux-bus: + $ref: /schemas/display/dp-aux-bus.yaml# + + data-lanes: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 4 + items: + maximum: 3 + "#sound-dai-cells": const: 0 + vdda-0p9-supply: + deprecated: true + vdda-1p2-supply: + deprecated: true + ports: $ref: /schemas/graph.yaml#/properties/ports properties: @@ -92,10 +113,33 @@ required: - clock-names - phys - phy-names - - "#sound-dai-cells" - power-domains - ports +allOf: + # AUX BUS does not exist on DP controllers + # Audio output also is present only on DP output + # p1 regions is present on DP, but not on eDP + - if: + properties: + compatible: + contains: + enum: + - qcom,sc7280-edp + - qcom,sc8180x-edp + then: + properties: + "#sound-dai-cells": false + reg: + maxItems: 4 + else: + properties: + aux-bus: false + reg: + minItems: 5 + required: + - "#sound-dai-cells" + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/display/msm/dpu-msm8998.yaml b/Documentation/devicetree/bindings/display/msm/dpu-msm8998.yaml new file mode 100644 index 000000000000..253665c693e6 --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/dpu-msm8998.yaml @@ -0,0 +1,223 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/dpu-msm8998.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Display DPU dt properties for MSM8998 target + +maintainers: + - AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> + +description: | + Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates + sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree + bindings of MDSS and DPU are mentioned for MSM8998 target. + +properties: + compatible: + items: + - const: qcom,msm8998-mdss + + reg: + maxItems: 1 + + reg-names: + const: mdss + + power-domains: + maxItems: 1 + + clocks: + items: + - description: Display AHB clock + - description: Display AXI clock + - description: Display core clock + + clock-names: + items: + - const: iface + - const: bus + - const: core + + interrupts: + maxItems: 1 + + interrupt-controller: true + + "#address-cells": true + + "#size-cells": true + + "#interrupt-cells": + const: 1 + + iommus: + items: + - description: Phandle to apps_smmu node with SID mask for Hard-Fail port0 + + ranges: true + +patternProperties: + "^display-controller@[0-9a-f]+$": + type: object + description: Node containing the properties of DPU. + additionalProperties: false + + properties: + compatible: + items: + - const: qcom,msm8998-dpu + + reg: + items: + - description: Address offset and size for mdp register set + - description: Address offset and size for regdma register set + - description: Address offset and size for vbif register set + - description: Address offset and size for non-realtime vbif register set + + reg-names: + items: + - const: mdp + - const: regdma + - const: vbif + - const: vbif_nrt + + clocks: + items: + - description: Display ahb clock + - description: Display axi clock + - description: Display mem-noc clock + - description: Display core clock + - description: Display vsync clock + + clock-names: + items: + - const: iface + - const: bus + - const: mnoc + - const: core + - const: vsync + + interrupts: + maxItems: 1 + + power-domains: + maxItems: 1 + + operating-points-v2: true + opp-table: + type: object + + ports: + $ref: /schemas/graph.yaml#/properties/ports + description: | + Contains the list of output ports from DPU device. These ports + connect to interfaces that are external to the DPU hardware, + such as DSI, DP etc. Each output port contains an endpoint that + describes how it is connected to an external interface. + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: DPU_INTF1 (DSI1) + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: DPU_INTF2 (DSI2) + + required: + - port@0 + - port@1 + + required: + - compatible + - reg + - reg-names + - clocks + - interrupts + - power-domains + - operating-points-v2 + - ports + +required: + - compatible + - reg + - reg-names + - power-domains + - clocks + - interrupts + - interrupt-controller + - iommus + - ranges + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,mmcc-msm8998.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + mdss: display-subsystem@c900000 { + compatible = "qcom,msm8998-mdss"; + reg = <0x0c900000 0x1000>; + reg-names = "mdss"; + + clocks = <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_AXI_CLK>, + <&mmcc MDSS_MDP_CLK>; + clock-names = "iface", "bus", "core"; + + #address-cells = <1>; + #interrupt-cells = <1>; + #size-cells = <1>; + + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + iommus = <&mmss_smmu 0>; + + power-domains = <&mmcc MDSS_GDSC>; + ranges; + + display-controller@c901000 { + compatible = "qcom,msm8998-dpu"; + reg = <0x0c901000 0x8f000>, + <0x0c9a8e00 0xf0>, + <0x0c9b0000 0x2008>, + <0x0c9b8000 0x1040>; + reg-names = "mdp", "regdma", "vbif", "vbif_nrt"; + + clocks = <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_AXI_CLK>, + <&mmcc MNOC_AHB_CLK>, + <&mmcc MDSS_MDP_CLK>, + <&mmcc MDSS_VSYNC_CLK>; + clock-names = "iface", "bus", "mnoc", "core", "vsync"; + + interrupt-parent = <&mdss>; + interrupts = <0>; + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmpd MSM8998_VDDMX>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + dpu_intf2_out: endpoint { + remote-endpoint = <&dsi1_in>; + }; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/msm/dpu-qcm2290.yaml b/Documentation/devicetree/bindings/display/msm/dpu-qcm2290.yaml new file mode 100644 index 000000000000..c5824e1d2382 --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/dpu-qcm2290.yaml @@ -0,0 +1,222 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/dpu-qcm2290.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Display DPU dt properties for QCM2290 target + +maintainers: + - Loic Poulain <loic.poulain@linaro.org> + +description: | + Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates + sub-blocks like DPU display controller and DSI. Device tree bindings of MDSS + and DPU are mentioned for QCM2290 target. + +properties: + compatible: + items: + - const: qcom,qcm2290-mdss + + reg: + maxItems: 1 + + reg-names: + const: mdss + + power-domains: + maxItems: 1 + + clocks: + items: + - description: Display AHB clock from gcc + - description: Display AXI clock + - description: Display core clock + + clock-names: + items: + - const: iface + - const: bus + - const: core + + interrupts: + maxItems: 1 + + interrupt-controller: true + + "#address-cells": true + + "#size-cells": true + + "#interrupt-cells": + const: 1 + + iommus: + items: + - description: Phandle to apps_smmu node with SID mask for Hard-Fail port0 + - description: Phandle to apps_smmu node with SID mask for Hard-Fail port1 + + ranges: true + + interconnects: + items: + - description: Interconnect path specifying the port ids for data bus + + interconnect-names: + const: mdp0-mem + + resets: + items: + - description: MDSS_CORE reset + +patternProperties: + "^display-controller@[0-9a-f]+$": + type: object + description: Node containing the properties of DPU. + additionalProperties: false + + properties: + compatible: + items: + - const: qcom,qcm2290-dpu + + reg: + items: + - description: Address offset and size for mdp register set + - description: Address offset and size for vbif register set + + reg-names: + items: + - const: mdp + - const: vbif + + clocks: + items: + - description: Display AXI clock from gcc + - description: Display AHB clock from dispcc + - description: Display core clock from dispcc + - description: Display lut clock from dispcc + - description: Display vsync clock from dispcc + + clock-names: + items: + - const: bus + - const: iface + - const: core + - const: lut + - const: vsync + + interrupts: + maxItems: 1 + + power-domains: + maxItems: 1 + + operating-points-v2: true + opp-table: + type: object + + ports: + $ref: /schemas/graph.yaml#/properties/ports + description: | + Contains the list of output ports from DPU device. These ports + connect to interfaces that are external to the DPU hardware, + such as DSI. Each output port contains an endpoint that + describes how it is connected to an external interface. + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: DPU_INTF1 (DSI1) + + required: + - port@0 + + required: + - compatible + - reg + - reg-names + - clocks + - interrupts + - power-domains + - operating-points-v2 + - ports + +required: + - compatible + - reg + - reg-names + - power-domains + - clocks + - interrupts + - interrupt-controller + - iommus + - ranges + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,dispcc-qcm2290.h> + #include <dt-bindings/clock/qcom,gcc-qcm2290.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interconnect/qcom,qcm2290.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + mdss: mdss@5e00000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "qcom,qcm2290-mdss"; + reg = <0x05e00000 0x1000>; + reg-names = "mdss"; + power-domains = <&dispcc MDSS_GDSC>; + clocks = <&gcc GCC_DISP_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + clock-names = "iface", "bus", "core"; + + interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + interconnects = <&mmrt_virt MASTER_MDP0 &bimc SLAVE_EBI1>; + interconnect-names = "mdp0-mem"; + + iommus = <&apps_smmu 0x420 0x2>, + <&apps_smmu 0x421 0x0>; + ranges; + + mdss_mdp: display-controller@5e01000 { + compatible = "qcom,qcm2290-dpu"; + reg = <0x05e01000 0x8f000>, + <0x05eb0000 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "bus", "iface", "core", "lut", "vsync"; + + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmpd QCM2290_VDDCX>; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml index 12a86b1ec1bc..4890bc25f3fd 100644 --- a/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml +++ b/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Display DPU dt properties for SC7180 target maintainers: - - Krishna Manikandan <mkrishn@codeaurora.org> + - Krishna Manikandan <quic_mkrishn@quicinc.com> description: | Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates @@ -65,10 +65,15 @@ properties: interconnect-names: const: mdp0-mem + resets: + items: + - description: MDSS_CORE reset + patternProperties: "^display-controller@[0-9a-f]+$": type: object description: Node containing the properties of DPU. + additionalProperties: false properties: compatible: @@ -110,6 +115,8 @@ patternProperties: maxItems: 1 operating-points-v2: true + opp-table: + type: object ports: $ref: /schemas/graph.yaml#/properties/ports diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sc7280.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sc7280.yaml index fbeb931a026e..584d646021d5 100644 --- a/Documentation/devicetree/bindings/display/msm/dpu-sc7280.yaml +++ b/Documentation/devicetree/bindings/display/msm/dpu-sc7280.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Display DPU dt properties for SC7280 maintainers: - - Krishna Manikandan <mkrishn@codeaurora.org> + - Krishna Manikandan <quic_mkrishn@quicinc.com> description: | Device tree bindings for MSM Mobile Display Subsystem (MDSS) that encapsulates @@ -64,10 +64,15 @@ properties: interconnect-names: const: mdp0-mem + resets: + items: + - description: MDSS_CORE reset + patternProperties: "^display-controller@[0-9a-f]+$": type: object description: Node containing the properties of DPU. + additionalProperties: false properties: compatible: @@ -108,6 +113,8 @@ patternProperties: maxItems: 1 operating-points-v2: true + opp-table: + type: object ports: $ref: /schemas/graph.yaml#/properties/ports diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml index b4ea7c92fb3d..7d1037373175 100644 --- a/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml +++ b/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Display DPU dt properties for SDM845 target maintainers: - - Krishna Manikandan <mkrishn@codeaurora.org> + - Krishna Manikandan <quic_mkrishn@quicinc.com> description: | Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates @@ -31,13 +31,11 @@ properties: clocks: items: - description: Display AHB clock from gcc - - description: Display AXI clock - description: Display core clock clock-names: items: - const: iface - - const: bus - const: core interrupts: @@ -59,10 +57,15 @@ properties: ranges: true + resets: + items: + - description: MDSS_CORE reset + patternProperties: "^display-controller@[0-9a-f]+$": type: object description: Node containing the properties of DPU. + additionalProperties: false properties: compatible: @@ -100,6 +103,9 @@ patternProperties: maxItems: 1 operating-points-v2: true + opp-table: + type: object + ports: $ref: /schemas/graph.yaml#/properties/ports description: | @@ -160,9 +166,8 @@ examples: power-domains = <&dispcc MDSS_GDSC>; clocks = <&gcc GCC_DISP_AHB_CLK>, - <&gcc GCC_DISP_AXI_CLK>, <&dispcc DISP_CC_MDSS_MDP_CLK>; - clock-names = "iface", "bus", "core"; + clock-names = "iface", "core"; interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; diff --git a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml index 35426fde8610..3b609c19e0bc 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml +++ b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml @@ -7,15 +7,16 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Display DSI controller maintainers: - - Krishna Manikandan <mkrishn@codeaurora.org> + - Krishna Manikandan <quic_mkrishn@quicinc.com> allOf: - $ref: "../dsi-controller.yaml#" properties: compatible: - items: - - const: qcom,mdss-dsi-ctrl + enum: + - qcom,mdss-dsi-ctrl + - qcom,dsi-ctrl-6g-qcm2290 reg: maxItems: 1 @@ -65,13 +66,11 @@ properties: 2 DSI links. assigned-clocks: - minItems: 2 maxItems: 2 description: | Parents of "byte" and "pixel" for the given platform. assigned-clock-parents: - minItems: 2 maxItems: 2 description: | The Byte clock and Pixel clock PLL outputs provided by a DSI PHY block. diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml index 4399715953e1..d9ad8b659f58 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml +++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Display DSI 10nm PHY maintainers: - - Krishna Manikandan <mkrishn@codeaurora.org> + - Krishna Manikandan <quic_mkrishn@quicinc.com> allOf: - $ref: dsi-phy-common.yaml# @@ -35,6 +35,36 @@ properties: Connected to DSI0_MIPI_DSI_PLL_VDDA0P9 pin for sc7180 target and connected to VDDA_MIPI_DSI_0_PLL_0P9 pin for sdm845 target + qcom,phy-rescode-offset-top: + $ref: /schemas/types.yaml#/definitions/int8-array + maxItems: 5 + description: + Integer array of offset for pull-up legs rescode for all five lanes. + To offset the drive strength from the calibrated value in an increasing + manner, -32 is the weakest and +31 is the strongest. + items: + minimum: -32 + maximum: 31 + + qcom,phy-rescode-offset-bot: + $ref: /schemas/types.yaml#/definitions/int8-array + maxItems: 5 + description: + Integer array of offset for pull-down legs rescode for all five lanes. + To offset the drive strength from the calibrated value in a decreasing + manner, -32 is the weakest and +31 is the strongest. + items: + minimum: -32 + maximum: 31 + + qcom,phy-drive-ldo-level: + $ref: "/schemas/types.yaml#/definitions/uint32" + description: + The PHY LDO has an amplitude tuning feature to adjust the LDO output + for the HSTX drive. Use supported levels (mV) to offset the drive level + from the default value. + enum: [ 375, 400, 425, 450, 475, 500 ] + required: - compatible - reg @@ -64,5 +94,9 @@ examples: clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, <&rpmhcc RPMH_CXO_CLK>; clock-names = "iface", "ref"; + + qcom,phy-rescode-offset-top = /bits/ 8 <0 0 0 0 0>; + qcom,phy-rescode-offset-bot = /bits/ 8 <0 0 0 0 0>; + qcom,phy-drive-ldo-level = <400>; }; ... diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml index 81dbee4803c0..1342d74ecfe0 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml +++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Display DSI 14nm PHY maintainers: - - Krishna Manikandan <mkrishn@codeaurora.org> + - Krishna Manikandan <quic_mkrishn@quicinc.com> allOf: - $ref: dsi-phy-common.yaml# diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-20nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-20nm.yaml index b8de785ce815..9c1f9140c731 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi-phy-20nm.yaml +++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-20nm.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Display DSI 20nm PHY maintainers: - - Krishna Manikandan <mkrishn@codeaurora.org> + - Krishna Manikandan <quic_mkrishn@quicinc.com> allOf: - $ref: dsi-phy-common.yaml# diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml index 69eecaa64b18..3d8540a06fe2 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml +++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Display DSI 28nm PHY maintainers: - - Krishna Manikandan <mkrishn@codeaurora.org> + - Krishna Manikandan <quic_mkrishn@quicinc.com> allOf: - $ref: dsi-phy-common.yaml# diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-common.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-common.yaml index 502bdda90235..76d40f7933dd 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi-phy-common.yaml +++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-common.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Description of Qualcomm Display DSI PHY common dt properties maintainers: - - Krishna Manikandan <mkrishn@codeaurora.org> + - Krishna Manikandan <quic_mkrishn@quicinc.com> description: | This defines the DSI PHY dt properties which are common for all diff --git a/Documentation/devicetree/bindings/display/msm/edp.txt b/Documentation/devicetree/bindings/display/msm/edp.txt deleted file mode 100644 index eff9daff418c..000000000000 --- a/Documentation/devicetree/bindings/display/msm/edp.txt +++ /dev/null @@ -1,56 +0,0 @@ -Qualcomm Technologies Inc. adreno/snapdragon eDP output - -Required properties: -- compatible: - * "qcom,mdss-edp" -- reg: Physical base address and length of the registers of controller and PLL -- reg-names: The names of register regions. The following regions are required: - * "edp" - * "pll_base" -- interrupts: The interrupt signal from the eDP block. -- power-domains: Should be <&mmcc MDSS_GDSC>. -- clocks: device clocks - See Documentation/devicetree/bindings/clock/clock-bindings.txt for details. -- clock-names: the following clocks are required: - * "core" - * "iface" - * "mdp_core" - * "pixel" - * "link" -- #clock-cells: The value should be 1. -- vdda-supply: phandle to vdda regulator device node -- lvl-vdd-supply: phandle to regulator device node which is used to supply power - to HPD receiving chip -- panel-en-gpios: GPIO pin to supply power to panel. -- panel-hpd-gpios: GPIO pin used for eDP hpd. - - -Example: - mdss_edp: qcom,mdss_edp@fd923400 { - compatible = "qcom,mdss-edp"; - reg-names = - "edp", - "pll_base"; - reg = <0xfd923400 0x700>, - <0xfd923a00 0xd4>; - interrupt-parent = <&mdss_mdp>; - interrupts = <12 0>; - power-domains = <&mmcc MDSS_GDSC>; - clock-names = - "core", - "pixel", - "iface", - "link", - "mdp_core"; - clocks = - <&mmcc MDSS_EDPAUX_CLK>, - <&mmcc MDSS_EDPPIXEL_CLK>, - <&mmcc MDSS_AHB_CLK>, - <&mmcc MDSS_EDPLINK_CLK>, - <&mmcc MDSS_MDP_CLK>; - #clock-cells = <1>; - vdda-supply = <&pma8084_l12>; - lvl-vdd-supply = <&lvl_vreg>; - panel-en-gpios = <&tlmm 137 0>; - panel-hpd-gpios = <&tlmm 103 0>; - }; diff --git a/Documentation/devicetree/bindings/display/msm/gmu.yaml b/Documentation/devicetree/bindings/display/msm/gmu.yaml index fe55611d2603..67fdeeabae0c 100644 --- a/Documentation/devicetree/bindings/display/msm/gmu.yaml +++ b/Documentation/devicetree/bindings/display/msm/gmu.yaml @@ -20,35 +20,24 @@ description: | properties: compatible: items: - - enum: - - qcom,adreno-gmu-630.2 + - pattern: '^qcom,adreno-gmu-6[0-9][0-9]\.[0-9]$' - const: qcom,adreno-gmu reg: - items: - - description: Core GMU registers - - description: GMU PDC registers - - description: GMU PDC sequence registers + minItems: 3 + maxItems: 4 reg-names: - items: - - const: gmu - - const: gmu_pdc - - const: gmu_pdc_seq + minItems: 3 + maxItems: 4 clocks: - items: - - description: GMU clock - - description: GPU CX clock - - description: GPU AXI clock - - description: GPU MEMNOC clock + minItems: 4 + maxItems: 7 clock-names: - items: - - const: gmu - - const: cxo - - const: axi - - const: memnoc + minItems: 4 + maxItems: 7 interrupts: items: @@ -76,6 +65,9 @@ properties: operating-points-v2: true + opp-table: + type: object + required: - compatible - reg @@ -91,6 +83,140 @@ required: additionalProperties: false +allOf: + - if: + properties: + compatible: + contains: + enum: + - qcom,adreno-gmu-618.0 + - qcom,adreno-gmu-630.2 + then: + properties: + reg: + items: + - description: Core GMU registers + - description: GMU PDC registers + - description: GMU PDC sequence registers + reg-names: + items: + - const: gmu + - const: gmu_pdc + - const: gmu_pdc_seq + clocks: + items: + - description: GMU clock + - description: GPU CX clock + - description: GPU AXI clock + - description: GPU MEMNOC clock + clock-names: + items: + - const: gmu + - const: cxo + - const: axi + - const: memnoc + + - if: + properties: + compatible: + contains: + enum: + - qcom,adreno-gmu-635.0 + then: + properties: + reg: + items: + - description: Core GMU registers + - description: Resource controller registers + - description: GMU PDC registers + reg-names: + items: + - const: gmu + - const: rscc + - const: gmu_pdc + clocks: + items: + - description: GMU clock + - description: GPU CX clock + - description: GPU AXI clock + - description: GPU MEMNOC clock + - description: GPU AHB clock + - description: GPU HUB CX clock + - description: GPU SMMU vote clock + clock-names: + items: + - const: gmu + - const: cxo + - const: axi + - const: memnoc + - const: ahb + - const: hub + - const: smmu_vote + + - if: + properties: + compatible: + contains: + enum: + - qcom,adreno-gmu-640.1 + then: + properties: + reg: + items: + - description: Core GMU registers + - description: GMU PDC registers + - description: GMU PDC sequence registers + reg-names: + items: + - const: gmu + - const: gmu_pdc + - const: gmu_pdc_seq + + - if: + properties: + compatible: + contains: + enum: + - qcom,adreno-gmu-650.2 + then: + properties: + reg: + items: + - description: Core GMU registers + - description: Resource controller registers + - description: GMU PDC registers + - description: GMU PDC sequence registers + reg-names: + items: + - const: gmu + - const: rscc + - const: gmu_pdc + - const: gmu_pdc_seq + + - if: + properties: + compatible: + contains: + enum: + - qcom,adreno-gmu-640.1 + - qcom,adreno-gmu-650.2 + then: + properties: + clocks: + items: + - description: GPU AHB clock + - description: GMU clock + - description: GPU CX clock + - description: GPU AXI clock + - description: GPU MEMNOC clock + clock-names: + items: + - const: ahb + - const: gmu + - const: cxo + - const: axi + - const: memnoc + examples: - | #include <dt-bindings/clock/qcom,gpucc-sdm845.h> diff --git a/Documentation/devicetree/bindings/display/msm/gpu.yaml b/Documentation/devicetree/bindings/display/msm/gpu.yaml index 99a1ba3ada56..ec4b1a75f46a 100644 --- a/Documentation/devicetree/bindings/display/msm/gpu.yaml +++ b/Documentation/devicetree/bindings/display/msm/gpu.yaml @@ -58,12 +58,15 @@ properties: - const: ocmem iommus: - maxItems: 1 + minItems: 1 + maxItems: 64 sram: $ref: /schemas/types.yaml#/definitions/phandle-array minItems: 1 maxItems: 4 + items: + maxItems: 1 description: | phandles to one or more reserved on-chip SRAM regions. phandle to the On Chip Memory (OCMEM) that's present on some a3xx and @@ -79,6 +82,7 @@ properties: zap-shader: type: object + additionalProperties: false description: | For a5xx and a6xx devices this node contains a memory-region that points to reserved memory to store the zap shader that can be used to diff --git a/Documentation/devicetree/bindings/display/msm/hdmi.txt b/Documentation/devicetree/bindings/display/msm/hdmi.txt deleted file mode 100644 index 5f90a40da51b..000000000000 --- a/Documentation/devicetree/bindings/display/msm/hdmi.txt +++ /dev/null @@ -1,99 +0,0 @@ -Qualcomm adreno/snapdragon hdmi output - -Required properties: -- compatible: one of the following - * "qcom,hdmi-tx-8996" - * "qcom,hdmi-tx-8994" - * "qcom,hdmi-tx-8084" - * "qcom,hdmi-tx-8974" - * "qcom,hdmi-tx-8660" - * "qcom,hdmi-tx-8960" -- reg: Physical base address and length of the controller's registers -- reg-names: "core_physical" -- interrupts: The interrupt signal from the hdmi block. -- power-domains: Should be <&mmcc MDSS_GDSC>. -- clocks: device clocks - See ../clocks/clock-bindings.txt for details. -- core-vdda-supply: phandle to supply regulator -- hdmi-mux-supply: phandle to mux regulator -- phys: the phandle for the HDMI PHY device -- phy-names: the name of the corresponding PHY device - -Optional properties: -- hpd-gpios: hpd pin -- qcom,hdmi-tx-mux-en-gpios: hdmi mux enable pin -- qcom,hdmi-tx-mux-sel-gpios: hdmi mux select pin -- qcom,hdmi-tx-mux-lpm-gpios: hdmi mux lpm pin -- power-domains: reference to the power domain(s), if available. -- pinctrl-names: the pin control state names; should contain "default" -- pinctrl-0: the default pinctrl state (active) -- pinctrl-1: the "sleep" pinctrl state - -HDMI PHY: -Required properties: -- compatible: Could be the following - * "qcom,hdmi-phy-8660" - * "qcom,hdmi-phy-8960" - * "qcom,hdmi-phy-8974" - * "qcom,hdmi-phy-8084" - * "qcom,hdmi-phy-8996" -- #phy-cells: Number of cells in a PHY specifier; Should be 0. -- reg: Physical base address and length of the registers of the PHY sub blocks. -- reg-names: The names of register regions. The following regions are required: - * "hdmi_phy" - * "hdmi_pll" - For HDMI PHY on msm8996, these additional register regions are required: - * "hdmi_tx_l0" - * "hdmi_tx_l1" - * "hdmi_tx_l3" - * "hdmi_tx_l4" -- power-domains: Should be <&mmcc MDSS_GDSC>. -- clocks: device clocks - See Documentation/devicetree/bindings/clock/clock-bindings.txt for details. -- core-vdda-supply: phandle to vdda regulator device node - -Example: - -/ { - ... - - hdmi: hdmi@4a00000 { - compatible = "qcom,hdmi-tx-8960"; - reg-names = "core_physical"; - reg = <0x04a00000 0x2f0>; - interrupts = <GIC_SPI 79 0>; - power-domains = <&mmcc MDSS_GDSC>; - clock-names = - "core", - "master_iface", - "slave_iface"; - clocks = - <&mmcc HDMI_APP_CLK>, - <&mmcc HDMI_M_AHB_CLK>, - <&mmcc HDMI_S_AHB_CLK>; - qcom,hdmi-tx-ddc-clk = <&msmgpio 70 GPIO_ACTIVE_HIGH>; - qcom,hdmi-tx-ddc-data = <&msmgpio 71 GPIO_ACTIVE_HIGH>; - qcom,hdmi-tx-hpd = <&msmgpio 72 GPIO_ACTIVE_HIGH>; - core-vdda-supply = <&pm8921_hdmi_mvs>; - hdmi-mux-supply = <&ext_3p3v>; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&hpd_active &ddc_active &cec_active>; - pinctrl-1 = <&hpd_suspend &ddc_suspend &cec_suspend>; - - phys = <&hdmi_phy>; - phy-names = "hdmi_phy"; - }; - - hdmi_phy: phy@4a00400 { - compatible = "qcom,hdmi-phy-8960"; - reg-names = "hdmi_phy", - "hdmi_pll"; - reg = <0x4a00400 0x60>, - <0x4a00500 0x100>; - #phy-cells = <0>; - power-domains = <&mmcc MDSS_GDSC>; - clock-names = "slave_iface"; - clocks = <&mmcc HDMI_S_AHB_CLK>; - core-vdda-supply = <&pm8921_hdmi_mvs>; - }; -}; diff --git a/Documentation/devicetree/bindings/display/msm/hdmi.yaml b/Documentation/devicetree/bindings/display/msm/hdmi.yaml new file mode 100644 index 000000000000..47e97669821c --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/hdmi.yaml @@ -0,0 +1,232 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- + +$id: http://devicetree.org/schemas/display/msm/hdmi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Adreno/Snapdragon HDMI output + +maintainers: + - Rob Clark <robdclark@gmail.com> + +properties: + compatible: + enum: + - qcom,hdmi-tx-8084 + - qcom,hdmi-tx-8660 + - qcom,hdmi-tx-8960 + - qcom,hdmi-tx-8974 + - qcom,hdmi-tx-8994 + - qcom,hdmi-tx-8996 + + clocks: + minItems: 1 + maxItems: 5 + + clock-names: + minItems: 1 + maxItems: 5 + + reg: + minItems: 1 + maxItems: 3 + + reg-names: + minItems: 1 + items: + - const: core_physical + - const: qfprom_physical + - const: hdcp_physical + + interrupts: + maxItems: 1 + + phys: + maxItems: 1 + + phy-names: + enum: + - hdmi_phy + - hdmi-phy + deprecated: true + + core-vdda-supply: + description: phandle to VDDA supply regulator + + hdmi-mux-supply: + description: phandle to mux regulator + deprecated: true + + core-vcc-supply: + description: phandle to VCC supply regulator + + hpd-gpios: + maxItems: 1 + description: hpd pin + + qcom,hdmi-tx-mux-en-gpios: + maxItems: 1 + deprecated: true + description: HDMI mux enable pin + + qcom,hdmi-tx-mux-sel-gpios: + maxItems: 1 + deprecated: true + description: HDMI mux select pin + + qcom,hdmi-tx-mux-lpm-gpios: + maxItems: 1 + deprecated: true + description: HDMI mux lpm pin + + '#sound-dai-cells': + const: 1 + + ports: + type: object + $ref: /schemas/graph.yaml#/properties/ports + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + description: | + Input endpoints of the controller. + + port@1: + $ref: /schemas/graph.yaml#/$defs/port-base + description: | + Output endpoints of the controller. + + required: + - port@0 + +required: + - compatible + - clocks + - clock-names + - reg + - reg-names + - interrupts + - phys + +allOf: + - if: + properties: + compatible: + contains: + enum: + - qcom,hdmi-tx-8960 + - qcom,hdmi-tx-8660 + then: + properties: + clocks: + minItems: 3 + maxItems: 3 + clock-names: + items: + - const: core + - const: master_iface + - const: slave_iface + core-vcc-supplies: false + + - if: + properties: + compatible: + contains: + enum: + - qcom,hdmi-tx-8974 + - qcom,hdmi-tx-8084 + - qcom,hdmi-tx-8994 + - qcom,hdmi-tx-8996 + then: + properties: + clocks: + minItems: 5 + clock-names: + items: + - const: mdp_core + - const: iface + - const: core + - const: alt_iface + - const: extp + hdmi-mux-supplies: false + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + hdmi: hdmi@4a00000 { + compatible = "qcom,hdmi-tx-8960"; + reg-names = "core_physical"; + reg = <0x04a00000 0x2f0>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "core", + "master_iface", + "slave_iface"; + clocks = <&clk 61>, + <&clk 72>, + <&clk 98>; + hpd-gpios = <&msmgpio 72 GPIO_ACTIVE_HIGH>; + core-vdda-supply = <&pm8921_hdmi_mvs>; + hdmi-mux-supply = <&ext_3p3v>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&hpd_active &ddc_active &cec_active>; + pinctrl-1 = <&hpd_suspend &ddc_suspend &cec_suspend>; + + phys = <&hdmi_phy>; + }; + - | + #include <dt-bindings/clock/qcom,gcc-msm8996.h> + #include <dt-bindings/clock/qcom,mmcc-msm8996.h> + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + hdmi@9a0000 { + compatible = "qcom,hdmi-tx-8996"; + reg = <0x009a0000 0x50c>, + <0x00070000 0x6158>, + <0x009e0000 0xfff>; + reg-names = "core_physical", + "qfprom_physical", + "hdcp_physical"; + + interrupt-parent = <&mdss>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&mmcc MDSS_MDP_CLK>, + <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_HDMI_CLK>, + <&mmcc MDSS_HDMI_AHB_CLK>, + <&mmcc MDSS_EXTPCLK_CLK>; + clock-names = "mdp_core", + "iface", + "core", + "alt_iface", + "extp"; + + phys = <&hdmi_phy>; + #sound-dai-cells = <1>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&hdmi_hpd_active &hdmi_ddc_active>; + pinctrl-1 = <&hdmi_hpd_suspend &hdmi_ddc_suspend>; + + core-vdda-supply = <&vreg_l12a_1p8>; + core-vcc-supply = <&vreg_s4a_1p8>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + endpoint { + remote-endpoint = <&mdp5_intf3_out>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/msm/mdp4.txt b/Documentation/devicetree/bindings/display/msm/mdp4.txt deleted file mode 100644 index b07eeb38f709..000000000000 --- a/Documentation/devicetree/bindings/display/msm/mdp4.txt +++ /dev/null @@ -1,114 +0,0 @@ -Qualcomm adreno/snapdragon MDP4 display controller - -Description: - -This is the bindings documentation for the MDP4 display controller found in -SoCs like MSM8960, APQ8064 and MSM8660. - -Required properties: -- compatible: - * "qcom,mdp4" - mdp4 -- reg: Physical base address and length of the controller's registers. -- interrupts: The interrupt signal from the display controller. -- clocks: device clocks - See ../clocks/clock-bindings.txt for details. -- clock-names: the following clocks are required. - * "core_clk" - * "iface_clk" - * "bus_clk" - * "lut_clk" - * "hdmi_clk" - * "tv_clk" -- ports: contains the list of output ports from MDP. These connect to interfaces - that are external to the MDP hardware, such as HDMI, DSI, EDP etc (LVDS is a - special case since it is a part of the MDP block itself). - - Each output port contains an endpoint that describes how it is connected to an - external interface. These are described by the standard properties documented - here: - Documentation/devicetree/bindings/graph.txt - Documentation/devicetree/bindings/media/video-interfaces.txt - - The output port mappings are: - Port 0 -> LCDC/LVDS - Port 1 -> DSI1 Cmd/Video - Port 2 -> DSI2 Cmd/Video - Port 3 -> DTV - -Optional properties: -- clock-names: the following clocks are optional: - * "lut_clk" -- qcom,lcdc-align-lsb: Boolean value indicating that LSB alignment should be - used for LCDC. This is only valid for 18bpp panels. - -Example: - -/ { - ... - - hdmi: hdmi@4a00000 { - ... - ports { - ... - port@0 { - reg = <0>; - hdmi_in: endpoint { - remote-endpoint = <&mdp_dtv_out>; - }; - }; - ... - }; - ... - }; - - ... - - mdp: mdp@5100000 { - compatible = "qcom,mdp4"; - reg = <0x05100000 0xf0000>; - interrupts = <GIC_SPI 75 0>; - clock-names = - "core_clk", - "iface_clk", - "lut_clk", - "hdmi_clk", - "tv_clk"; - clocks = - <&mmcc MDP_CLK>, - <&mmcc MDP_AHB_CLK>, - <&mmcc MDP_AXI_CLK>, - <&mmcc MDP_LUT_CLK>, - <&mmcc HDMI_TV_CLK>, - <&mmcc MDP_TV_CLK>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - mdp_lvds_out: endpoint { - }; - }; - - port@1 { - reg = <1>; - mdp_dsi1_out: endpoint { - }; - }; - - port@2 { - reg = <2>; - mdp_dsi2_out: endpoint { - }; - }; - - port@3 { - reg = <3>; - mdp_dtv_out: endpoint { - remote-endpoint = <&hdmi_in>; - }; - }; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/display/msm/mdp4.yaml b/Documentation/devicetree/bindings/display/msm/mdp4.yaml new file mode 100644 index 000000000000..58c13f5277b6 --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/mdp4.yaml @@ -0,0 +1,124 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/display/msm/mdp4.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Qualcomm Adreno/Snapdragon MDP4 display controller + +description: > + MDP4 display controller found in SoCs like MSM8960, APQ8064 and MSM8660. + +maintainers: + - Rob Clark <robdclark@gmail.com> + +properties: + compatible: + const: qcom,mdp4 + + clocks: + minItems: 6 + maxItems: 6 + + clock-names: + items: + - const: core_clk + - const: iface_clk + - const: bus_clk + - const: lut_clk + - const: hdmi_clk + - const: tv_clk + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + iommus: + maxItems: 4 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: LCDC/LVDS + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: DSI1 Cmd / Video + + port@2: + $ref: /schemas/graph.yaml#/properties/port + description: DSI2 Cmd / Video + + port@3: + $ref: /schemas/graph.yaml#/properties/port + description: Digital TV + + qcom,lcdc-align-lsb: + type: boolean + description: > + Indication that LSB alignment should be used for LCDC. + This is only valid for 18bpp panels. + +required: + - compatible + - reg + - clocks + - ports + +additionalProperties: false + +examples: + - | + mdp: mdp@5100000 { + compatible = "qcom,mdp4"; + reg = <0x05100000 0xf0000>; + interrupts = <0 75 0>; + clock-names = + "core_clk", + "iface_clk", + "bus_clk", + "lut_clk", + "hdmi_clk", + "tv_clk"; + clocks = + <&mmcc 77>, + <&mmcc 86>, + <&mmcc 102>, + <&mmcc 75>, + <&mmcc 97>, + <&mmcc 12>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdp_lvds_out: endpoint { + }; + }; + + port@1 { + reg = <1>; + mdp_dsi1_out: endpoint { + }; + }; + + port@2 { + reg = <2>; + mdp_dsi2_out: endpoint { + }; + }; + + port@3 { + reg = <3>; + mdp_dtv_out: endpoint { + remote-endpoint = <&hdmi_in>; + }; + }; + }; + }; |