diff options
Diffstat (limited to 'Documentation/devicetree/bindings/display')
67 files changed, 244 insertions, 842 deletions
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-backend.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-backend.yaml index 86057d541065..12a7df0e38b2 100644 --- a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-backend.yaml +++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-backend.yaml @@ -84,36 +84,23 @@ properties: const: dma-mem ports: - type: object - description: | - A ports node with endpoint definitions as defined in - Documentation/devicetree/bindings/media/video-interfaces.txt. + $ref: /schemas/graph.yaml#/properties/ports properties: - "#address-cells": - const: 1 - - "#size-cells": - const: 0 - port@0: - type: object - description: | + $ref: /schemas/graph.yaml#/properties/port + description: Input endpoints of the controller. port@1: - type: object - description: | + $ref: /schemas/graph.yaml#/properties/port + description: Output endpoints of the controller. required: - - "#address-cells" - - "#size-cells" - port@0 - port@1 - additionalProperties: false - required: - compatible - reg diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-frontend.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-frontend.yaml index 3eb1c2bbf4e7..055157fbf3bf 100644 --- a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-frontend.yaml +++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-frontend.yaml @@ -57,35 +57,22 @@ properties: maxItems: 1 ports: - type: object - description: | - A ports node with endpoint definitions as defined in - Documentation/devicetree/bindings/media/video-interfaces.txt. + $ref: /schemas/graph.yaml#/properties/ports properties: - "#address-cells": - const: 1 - - "#size-cells": - const: 0 - port@0: - type: object + $ref: /schemas/graph.yaml#/properties/port description: | Input endpoints of the controller. port@1: - type: object + $ref: /schemas/graph.yaml#/properties/port description: | Output endpoints of the controller. required: - - "#address-cells" - - "#size-cells" - port@1 - additionalProperties: false - required: - compatible - reg diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-hdmi.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-hdmi.yaml index 75e6479397a5..7f11452539f4 100644 --- a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-hdmi.yaml +++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-hdmi.yaml @@ -76,37 +76,24 @@ properties: - const: audio-tx ports: - type: object - description: | - A ports node with endpoint definitions as defined in - Documentation/devicetree/bindings/media/video-interfaces.txt. + $ref: /schemas/graph.yaml#/properties/ports properties: - "#address-cells": - const: 1 - - "#size-cells": - const: 0 - port@0: - type: object + $ref: /schemas/graph.yaml#/properties/port description: | Input endpoints of the controller. port@1: - type: object + $ref: /schemas/graph.yaml#/properties/port description: | Output endpoints of the controller. Usually an HDMI connector. required: - - "#address-cells" - - "#size-cells" - port@0 - port@1 - additionalProperties: false - required: - compatible - reg diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml index 4c15a2644a7c..c13faf3e6581 100644 --- a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml +++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml @@ -115,31 +115,24 @@ properties: - const: lvds ports: - type: object - description: | - A ports node with endpoint definitions as defined in - Documentation/devicetree/bindings/media/video-interfaces.txt. + $ref: /schemas/graph.yaml#/properties/ports properties: - "#address-cells": - const: 1 - - "#size-cells": - const: 0 - port@0: - type: object + $ref: /schemas/graph.yaml#/properties/port description: | Input endpoints of the controller. port@1: - type: object + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false description: | Output endpoints of the controller. patternProperties: "^endpoint(@[0-9])$": - type: object + $ref: /schemas/graph.yaml#/$defs/endpoint-base + unevaluatedProperties: false properties: allwinner,tcon-channel: @@ -156,16 +149,10 @@ properties: property is not present, the endpoint number will be used as the channel number. - unevaluatedProperties: true - required: - - "#address-cells" - - "#size-cells" - port@0 - port@1 - additionalProperties: false - required: - compatible - reg diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tv-encoder.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tv-encoder.yaml index 6009324be967..afc0ed799e0e 100644 --- a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tv-encoder.yaml +++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tv-encoder.yaml @@ -24,11 +24,9 @@ properties: maxItems: 1 port: - type: object + $ref: /schemas/graph.yaml#/properties/port description: - A port node with endpoint definitions as defined in - Documentation/devicetree/bindings/media/video-interfaces.txt. The - first port should be the input endpoint, usually coming from the + The first port should be the input endpoint, usually coming from the associated TCON. required: diff --git a/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-drc.yaml b/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-drc.yaml index 0c1ce55940e1..71cce5687580 100644 --- a/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-drc.yaml +++ b/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-drc.yaml @@ -46,36 +46,23 @@ properties: maxItems: 1 ports: - type: object - description: | - A ports node with endpoint definitions as defined in - Documentation/devicetree/bindings/media/video-interfaces.txt. + $ref: /schemas/graph.yaml#/properties/ports properties: - "#address-cells": - const: 1 - - "#size-cells": - const: 0 - port@0: - type: object + $ref: /schemas/graph.yaml#/properties/port description: | Input endpoints of the controller. port@1: - type: object + $ref: /schemas/graph.yaml#/properties/port description: | Output endpoints of the controller. required: - - "#address-cells" - - "#size-cells" - port@0 - port@1 - additionalProperties: false - required: - compatible - reg diff --git a/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml b/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml index 7aa330dabc44..a738d7c12a97 100644 --- a/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml +++ b/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml @@ -47,11 +47,9 @@ properties: const: dphy port: - type: object + $ref: /schemas/graph.yaml#/properties/port description: - A port node with endpoint definitions as defined in - Documentation/devicetree/bindings/media/video-interfaces.txt. That - port should be the input endpoint, usually coming from the + The port should be the input endpoint, usually coming from the associated TCON. required: diff --git a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-de2-mixer.yaml b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-de2-mixer.yaml index c040eef56518..4f91eec26de9 100644 --- a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-de2-mixer.yaml +++ b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-de2-mixer.yaml @@ -43,35 +43,22 @@ properties: maxItems: 1 ports: - type: object - description: | - A ports node with endpoint definitions as defined in - Documentation/devicetree/bindings/media/video-interfaces.txt. + $ref: /schemas/graph.yaml#/properties/ports properties: - "#address-cells": - const: 1 - - "#size-cells": - const: 0 - port@0: - type: object + $ref: /schemas/graph.yaml#/properties/port description: | Input endpoints of the controller. port@1: - type: object + $ref: /schemas/graph.yaml#/properties/port description: | Output endpoints of the controller. required: - - "#address-cells" - - "#size-cells" - port@1 - additionalProperties: false - required: - compatible - reg diff --git a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml index fa4769a0b26e..b3e9992525c2 100644 --- a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml +++ b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml @@ -93,38 +93,25 @@ properties: The VCC power supply of the controller ports: - type: object - description: | - A ports node with endpoint definitions as defined in - Documentation/devicetree/bindings/media/video-interfaces.txt. + $ref: /schemas/graph.yaml#/properties/ports properties: - "#address-cells": - const: 1 - - "#size-cells": - const: 0 - port@0: - type: object + $ref: /schemas/graph.yaml#/properties/port description: | Input endpoints of the controller. Usually the associated TCON. port@1: - type: object + $ref: /schemas/graph.yaml#/properties/port description: | Output endpoints of the controller. Usually an HDMI connector. required: - - "#address-cells" - - "#size-cells" - port@0 - port@1 - additionalProperties: false - required: - compatible - reg diff --git a/Documentation/devicetree/bindings/display/allwinner,sun8i-r40-tcon-top.yaml b/Documentation/devicetree/bindings/display/allwinner,sun8i-r40-tcon-top.yaml index b98ca609824b..ec21e8bf2767 100644 --- a/Documentation/devicetree/bindings/display/allwinner,sun8i-r40-tcon-top.yaml +++ b/Documentation/devicetree/bindings/display/allwinner,sun8i-r40-tcon-top.yaml @@ -80,141 +80,45 @@ properties: maxItems: 1 ports: - type: object - description: | - A ports node with endpoint definitions as defined in - Documentation/devicetree/bindings/media/video-interfaces.txt. - All ports should have only one endpoint connected to - remote endpoint. + $ref: /schemas/graph.yaml#/properties/ports properties: - "#address-cells": - const: 1 - - "#size-cells": - const: 0 - port@0: - type: object + $ref: /schemas/graph.yaml#/properties/port description: | Input endpoint for Mixer 0 mux. port@1: - type: object + $ref: /schemas/graph.yaml#/properties/port description: | Output endpoint for Mixer 0 mux - properties: - "#address-cells": - const: 1 - - "#size-cells": - const: 0 - - reg: true - - patternProperties: - "^endpoint@[0-9]$": - type: object - - properties: - reg: - description: | - ID of the target TCON - - required: - - reg - - required: - - "#address-cells" - - "#size-cells" - - additionalProperties: false - port@2: - type: object + $ref: /schemas/graph.yaml#/properties/port description: | Input endpoint for Mixer 1 mux. port@3: - type: object + $ref: /schemas/graph.yaml#/properties/port description: | Output endpoint for Mixer 1 mux - properties: - "#address-cells": - const: 1 - - "#size-cells": - const: 0 - - reg: true - - patternProperties: - "^endpoint@[0-9]$": - type: object - - properties: - reg: - description: | - ID of the target TCON - - required: - - reg - - required: - - "#address-cells" - - "#size-cells" - - additionalProperties: false - port@4: - type: object + $ref: /schemas/graph.yaml#/properties/port description: | Input endpoint for HDMI mux. - properties: - "#address-cells": - const: 1 - - "#size-cells": - const: 0 - - reg: true - - patternProperties: - "^endpoint@[0-9]$": - type: object - - properties: - reg: - description: | - ID of the target TCON - - required: - - reg - - required: - - "#address-cells" - - "#size-cells" - - additionalProperties: false - port@5: - type: object + $ref: /schemas/graph.yaml#/properties/port description: | Output endpoint for HDMI mux required: - - "#address-cells" - - "#size-cells" - port@0 - port@1 - port@4 - port@5 - additionalProperties: false - required: - "#clock-cells" - compatible diff --git a/Documentation/devicetree/bindings/display/allwinner,sun9i-a80-deu.yaml b/Documentation/devicetree/bindings/display/allwinner,sun9i-a80-deu.yaml index 96de41d32b3e..637372ec4614 100644 --- a/Documentation/devicetree/bindings/display/allwinner,sun9i-a80-deu.yaml +++ b/Documentation/devicetree/bindings/display/allwinner,sun9i-a80-deu.yaml @@ -40,36 +40,23 @@ properties: maxItems: 1 ports: - type: object - description: | - A ports node with endpoint definitions as defined in - Documentation/devicetree/bindings/media/video-interfaces.txt. + $ref: /schemas/graph.yaml#/properties/ports properties: - "#address-cells": - const: 1 - - "#size-cells": - const: 0 - port@0: - type: object + $ref: /schemas/graph.yaml#/properties/port description: | Input endpoints of the controller. port@1: - type: object + $ref: /schemas/graph.yaml#/properties/port description: | Output endpoints of the controller. required: - - "#address-cells" - - "#size-cells" - port@0 - port@1 - additionalProperties: false - required: - compatible - reg diff --git a/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml b/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml index 0da42ab8fd3a..cf5a208f2f10 100644 --- a/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml +++ b/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml @@ -81,12 +81,12 @@ properties: description: phandle to an external 5V regulator to power the HDMI logic port@0: - type: object + $ref: /schemas/graph.yaml#/properties/port description: A port node pointing to the VENC Input port node. port@1: - type: object + $ref: /schemas/graph.yaml#/properties/port description: A port node pointing to the TMDS Output port node. diff --git a/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml b/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml index a8d202c9d004..851cb0781217 100644 --- a/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml +++ b/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml @@ -83,12 +83,12 @@ properties: description: phandle to the associated power domain port@0: - type: object + $ref: /schemas/graph.yaml#/properties/port description: A port node pointing to the CVBS VDAC port node. port@1: - type: object + $ref: /schemas/graph.yaml#/properties/port description: A port node pointing to the HDMI-TX port node. diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml index 7ce06f9f9f8e..a1d5a32660e0 100644 --- a/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml +++ b/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml @@ -53,6 +53,24 @@ properties: - const: audio - const: cec + interrupts: + items: + - description: CEC TX interrupt + - description: CEC RX interrupt + - description: CEC stuck at low interrupt + - description: Wake-up interrupt + - description: Hotplug connected interrupt + - description: Hotplug removed interrupt + + interrupt-names: + items: + - const: cec-tx + - const: cec-rx + - const: cec-low + - const: wakeup + - const: hpd-connected + - const: hpd-removed + ddc: allOf: - $ref: /schemas/types.yaml#/definitions/phandle @@ -60,6 +78,7 @@ properties: Phandle of the I2C controller used for DDC EDID probing hpd-gpios: + maxItems: 1 description: > The GPIO pin for the HDMI hotplug detect (if it doesn't appear as an interrupt/status bit in the HDMI controller itself) diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-dpi.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-dpi.yaml index 5c1024bbc1b3..c9ad0ecc9b6d 100644 --- a/Documentation/devicetree/bindings/display/brcm,bcm2835-dpi.yaml +++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-dpi.yaml @@ -27,10 +27,9 @@ properties: - const: pixel port: - type: object - description: > - Port node with a single endpoint connecting to the panel, as - defined in Documentation/devicetree/bindings/media/video-interfaces.txt. + $ref: /schemas/graph.yaml#/properties/port + description: + Port node with a single endpoint connecting to the panel. required: - compatible diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-hdmi.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-hdmi.yaml index f54b4e4808f0..031e35e76db2 100644 --- a/Documentation/devicetree/bindings/display/brcm,bcm2835-hdmi.yaml +++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-hdmi.yaml @@ -37,6 +37,7 @@ properties: Phandle of the I2C controller used for DDC EDID probing hpd-gpios: + maxItems: 1 description: > The GPIO pin for the HDMI hotplug detect (if it doesn't appear as an interrupt/status bit in the HDMI controller itself) diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-hvs.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-hvs.yaml index e826ab0adb75..2e8566f47e63 100644 --- a/Documentation/devicetree/bindings/display/brcm,bcm2835-hvs.yaml +++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-hvs.yaml @@ -36,7 +36,7 @@ if: properties: compatible: contains: - const: brcm,bcm2711-hvs" + const: brcm,bcm2711-hvs then: required: diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml index 9392b5502a32..c789784efe30 100644 --- a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml +++ b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml @@ -35,16 +35,16 @@ properties: maxItems: 1 ports: - type: object + $ref: /schemas/graph.yaml#/properties/ports properties: port@0: - type: object + $ref: /schemas/graph.yaml#/properties/port description: Video port for MIPI DSI input. port@1: - type: object + $ref: /schemas/graph.yaml#/properties/port description: Video port for panel or connector. diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,anx7814.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,anx7814.yaml index 3ba477aefdd7..8e13f27b28ed 100644 --- a/Documentation/devicetree/bindings/display/bridge/analogix,anx7814.yaml +++ b/Documentation/devicetree/bindings/display/bridge/analogix,anx7814.yaml @@ -42,31 +42,18 @@ properties: description: Regulator for 1.0V digital core power. ports: - type: object - description: - A node containing input and output port nodes with endpoint - definitions as documented in - Documentation/devicetree/bindings/media/video-interfaces.txt - Documentation/devicetree/bindings/graph.txt + $ref: /schemas/graph.yaml#/properties/ports properties: port@0: - type: object + $ref: /schemas/graph.yaml#/properties/port description: Video port for HDMI input. - properties: - reg: - const: 0 - port@1: - type: object + $ref: /schemas/graph.yaml#/properties/port description: Video port for SlimPort, DisplayPort, eDP or MyDP output. - properties: - reg: - const: 1 - required: - port@0 - port@1 diff --git a/Documentation/devicetree/bindings/display/bridge/anx6345.yaml b/Documentation/devicetree/bindings/display/bridge/anx6345.yaml index fccd63521a8c..1c0406c38fe5 100644 --- a/Documentation/devicetree/bindings/display/bridge/anx6345.yaml +++ b/Documentation/devicetree/bindings/display/bridge/anx6345.yaml @@ -32,31 +32,23 @@ properties: description: Regulator for 2.5V digital core power. ports: - type: object + $ref: /schemas/graph.yaml#/properties/ports properties: - '#address-cells': - const: 1 - - '#size-cells': - const: 0 - port@0: - type: object - description: | + $ref: /schemas/graph.yaml#/properties/port + description: Video port for LVTTL input port@1: - type: object - description: | + $ref: /schemas/graph.yaml#/properties/port + description: Video port for eDP output (panel or connector). May be omitted if EDID works reliably. required: - port@0 - additionalProperties: false - required: - compatible - reg diff --git a/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8546.yaml b/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8546.yaml index 74d675fc6e7b..63427878715e 100644 --- a/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8546.yaml +++ b/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8546.yaml @@ -57,47 +57,37 @@ properties: maxItems: 1 ports: - type: object - description: - Ports as described in Documentation/devicetree/bindings/graph.txt. + $ref: /schemas/graph.yaml#/properties/ports properties: - '#address-cells': - const: 1 - - '#size-cells': - const: 0 - port@0: - type: object + $ref: /schemas/graph.yaml#/properties/port description: First input port representing the DP bridge input. port@1: - type: object + $ref: /schemas/graph.yaml#/properties/port description: Second input port representing the DP bridge input. port@2: - type: object + $ref: /schemas/graph.yaml#/properties/port description: Third input port representing the DP bridge input. port@3: - type: object + $ref: /schemas/graph.yaml#/properties/port description: Fourth input port representing the DP bridge input. port@4: - type: object + $ref: /schemas/graph.yaml#/properties/port description: Output port representing the DP bridge output. required: - port@0 - port@4 - - '#address-cells' - - '#size-cells' allOf: - if: diff --git a/Documentation/devicetree/bindings/display/bridge/chrontel,ch7033.yaml b/Documentation/devicetree/bindings/display/bridge/chrontel,ch7033.yaml index 9f38f55fc990..bb6289c7d375 100644 --- a/Documentation/devicetree/bindings/display/bridge/chrontel,ch7033.yaml +++ b/Documentation/devicetree/bindings/display/bridge/chrontel,ch7033.yaml @@ -19,16 +19,16 @@ properties: description: I2C address of the device ports: - type: object + $ref: /schemas/graph.yaml#/properties/ports properties: port@0: - type: object + $ref: /schemas/graph.yaml#/properties/port description: | Video port for RGB input. port@1: - type: object + $ref: /schemas/graph.yaml#/properties/port description: | DVI port, should be connected to a node compatible with the dvi-connector binding. diff --git a/Documentation/devicetree/bindings/display/bridge/intel,keembay-dsi.yaml b/Documentation/devicetree/bindings/display/bridge/intel,keembay-dsi.yaml index 35c9dfd86650..dcb1336ee2a5 100644 --- a/Documentation/devicetree/bindings/display/bridge/intel,keembay-dsi.yaml +++ b/Documentation/devicetree/bindings/display/bridge/intel,keembay-dsi.yaml @@ -35,29 +35,21 @@ properties: - const: clk_mipi_cfg ports: - type: object + $ref: /schemas/graph.yaml#/properties/ports properties: - '#address-cells': - const: 1 - - '#size-cells': - const: 0 - port@0: - type: object + $ref: /schemas/graph.yaml#/properties/port description: MIPI DSI input port. port@1: - type: object + $ref: /schemas/graph.yaml#/properties/port description: DSI output port. required: - port@0 - port@1 - additionalProperties: false - required: - compatible - reg diff --git a/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml b/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml index 02cfc0a3b550..833d11b2303a 100644 --- a/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml +++ b/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml @@ -53,7 +53,7 @@ properties: description: extcon specifier for the Power Delivery port: - type: object + $ref: /schemas/graph.yaml#/properties/port description: A port node pointing to DPI host port node required: diff --git a/Documentation/devicetree/bindings/display/bridge/lontium,lt9611.yaml b/Documentation/devicetree/bindings/display/bridge/lontium,lt9611.yaml index 7a1c89b995e2..5b9d36f7af30 100644 --- a/Documentation/devicetree/bindings/display/bridge/lontium,lt9611.yaml +++ b/Documentation/devicetree/bindings/display/bridge/lontium,lt9611.yaml @@ -38,82 +38,26 @@ properties: description: Regulator for 3.3V IO power. ports: - type: object + $ref: /schemas/graph.yaml#/properties/ports properties: - "#address-cells": - const: 1 - - "#size-cells": - const: 0 - port@0: - type: object - description: | + $ref: /schemas/graph.yaml#/properties/port + description: Primary MIPI port-1 for MIPI input - properties: - reg: - const: 0 - - patternProperties: - "^endpoint(@[0-9])$": - type: object - additionalProperties: false - - properties: - remote-endpoint: - $ref: /schemas/types.yaml#/definitions/phandle - - required: - - reg - port@1: - type: object - description: | + $ref: /schemas/graph.yaml#/properties/port + description: Additional MIPI port-2 for MIPI input, used in combination with primary MIPI port-1 to drive higher resolution displays - properties: - reg: - const: 1 - - patternProperties: - "^endpoint(@[0-9])$": - type: object - additionalProperties: false - - properties: - remote-endpoint: - $ref: /schemas/types.yaml#/definitions/phandle - - required: - - reg - port@2: - type: object - description: | + $ref: /schemas/graph.yaml#/properties/port + description: HDMI port for HDMI output - properties: - reg: - const: 2 - - patternProperties: - "^endpoint(@[0-9])$": - type: object - additionalProperties: false - - properties: - remote-endpoint: - $ref: /schemas/types.yaml#/definitions/phandle - - required: - - reg - required: - - "#address-cells" - - "#size-cells" - port@0 - port@2 diff --git a/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml index 66a14d60ce1d..304a1367faaa 100644 --- a/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml +++ b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml @@ -45,25 +45,17 @@ properties: - thine,thc63lvdm83d # For the THC63LVDM83D LVDS serializer ports: - type: object - description: | - This device has two video ports. Their connections are modeled using the - OF graph bindings specified in Documentation/devicetree/bindings/graph.txt - properties: - '#address-cells': - const: 1 - - '#size-cells': - const: 0 + $ref: /schemas/graph.yaml#/properties/ports + properties: port@0: - type: object + $ref: /schemas/graph.yaml#/properties/port description: | For LVDS encoders, port 0 is the parallel input For LVDS decoders, port 0 is the LVDS input port@1: - type: object + $ref: /schemas/graph.yaml#/properties/port description: | For LVDS encoders, port 1 is the LVDS output For LVDS decoders, port 1 is the parallel output @@ -72,8 +64,6 @@ properties: - port@0 - port@1 - additionalProperties: false - powerdown-gpios: description: The GPIO used to control the power down line of this device. diff --git a/Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml b/Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml index a125b2dd3a2f..350fb8f400f0 100644 --- a/Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml +++ b/Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml @@ -84,40 +84,23 @@ properties: - const: pclk ports: - type: object - description: - A node containing DSI input & output port nodes with endpoint - definitions as documented in - Documentation/devicetree/bindings/graph.txt. + $ref: /schemas/graph.yaml#/properties/ports + properties: port@0: - type: object + $ref: /schemas/graph.yaml#/$defs/port-base description: Input port node to receive pixel data from the display controller. Exactly one endpoint must be specified. properties: - '#address-cells': - const: 1 - - '#size-cells': - const: 0 - endpoint@0: + $ref: /schemas/graph.yaml#/properties/endpoint description: sub-node describing the input from LCDIF - type: object endpoint@1: + $ref: /schemas/graph.yaml#/properties/endpoint description: sub-node describing the input from DCSS - type: object - - reg: - const: 0 - - required: - - '#address-cells' - - '#size-cells' - - reg oneOf: - required: @@ -125,28 +108,18 @@ properties: - required: - endpoint@1 - additionalProperties: false + unevaluatedProperties: false port@1: - type: object + $ref: /schemas/graph.yaml#/properties/port description: DSI output port node to the panel or the next bridge in the chain - '#address-cells': - const: 1 - - '#size-cells': - const: 0 - required: - - '#address-cells' - - '#size-cells' - port@0 - port@1 - additionalProperties: false - required: - '#address-cells' - '#size-cells' diff --git a/Documentation/devicetree/bindings/display/bridge/ps8640.yaml b/Documentation/devicetree/bindings/display/bridge/ps8640.yaml index 763c7909473e..fce82b605c8b 100644 --- a/Documentation/devicetree/bindings/display/bridge/ps8640.yaml +++ b/Documentation/devicetree/bindings/display/bridge/ps8640.yaml @@ -41,34 +41,22 @@ properties: description: Regulator for 3.3V digital core power. ports: - type: object - description: - A node containing DSI input & output port nodes with endpoint - definitions as documented in - Documentation/devicetree/bindings/media/video-interfaces.txt - Documentation/devicetree/bindings/graph.txt - properties: - '#address-cells': - const: 1 - - '#size-cells': - const: 0 + $ref: /schemas/graph.yaml#/properties/ports + properties: port@0: - type: object - description: | + $ref: /schemas/graph.yaml#/properties/port + description: Video port for DSI input port@1: - type: object - description: | + $ref: /schemas/graph.yaml#/properties/port + description: Video port for eDP output (panel or connector). required: - port@0 - additionalProperties: false - required: - compatible - reg diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,lvds.yaml b/Documentation/devicetree/bindings/display/bridge/renesas,lvds.yaml index 7eddcdb666dc..acfc327f70a7 100644 --- a/Documentation/devicetree/bindings/display/bridge/renesas,lvds.yaml +++ b/Documentation/devicetree/bindings/display/bridge/renesas,lvds.yaml @@ -49,33 +49,21 @@ properties: maxItems: 1 ports: - type: object - description: | - This device has two video ports. Their connections are modelled using the - OF graph bindings specified in Documentation/devicetree/bindings/graph.txt. - Each port shall have a single endpoint. + $ref: /schemas/graph.yaml#/properties/ports properties: - '#address-cells': - const: 1 - - '#size-cells': - const: 0 - port@0: - type: object + $ref: /schemas/graph.yaml#/properties/port description: Parallel RGB input port port@1: - type: object + $ref: /schemas/graph.yaml#/properties/port description: LVDS output port required: - port@0 - port@1 - additionalProperties: false - power-domains: maxItems: 1 diff --git a/Documentation/devicetree/bindings/display/bridge/sii902x.txt b/Documentation/devicetree/bindings/display/bridge/sii902x.txt index 02c21b584741..3bc760cc31cb 100644 --- a/Documentation/devicetree/bindings/display/bridge/sii902x.txt +++ b/Documentation/devicetree/bindings/display/bridge/sii902x.txt @@ -40,7 +40,7 @@ Optional properties: documents on how to describe the way the sii902x device is connected to the rest of the audio system: Documentation/devicetree/bindings/sound/simple-card.yaml - Documentation/devicetree/bindings/sound/audio-graph-card.txt + Documentation/devicetree/bindings/sound/audio-graph-card.yaml Note: In case of the audio-graph-card binding the used port index should be 3. diff --git a/Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml b/Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml index 64e8a1c24b40..6c7b577fd471 100644 --- a/Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml +++ b/Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml @@ -30,31 +30,21 @@ properties: - ti,ths8135 ports: - type: object - description: | - This device has two video ports. Their connections are modeled using the - OF graph bindings specified in Documentation/devicetree/bindings/graph.txt. - properties: - '#address-cells': - const: 1 - - '#size-cells': - const: 0 + $ref: /schemas/graph.yaml#/properties/ports + properties: port@0: - type: object + $ref: /schemas/graph.yaml#/properties/port description: The bridge input port@1: - type: object + $ref: /schemas/graph.yaml#/properties/port description: The bridge output required: - port@0 - port@1 - additionalProperties: false - enable-gpios: maxItems: 1 description: GPIO controlling bridge enable diff --git a/Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml b/Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml index e42cb610f545..3c3e51af154b 100644 --- a/Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml +++ b/Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml @@ -47,14 +47,15 @@ properties: const: apb ports: - type: object + $ref: /schemas/graph.yaml#/properties/ports properties: port@0: - type: object + $ref: /schemas/graph.yaml#/properties/port description: Input node to receive pixel data. + port@1: - type: object + $ref: /schemas/graph.yaml#/properties/port description: DSI output node to panel. required: diff --git a/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.yaml b/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.yaml index ac5a3a673a18..8ae382429d2b 100644 --- a/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.yaml +++ b/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.yaml @@ -25,11 +25,8 @@ properties: const: thine,thc63lvd1024 ports: - type: object + $ref: /schemas/graph.yaml#/properties/ports description: | - This device has four video ports. Their connections are modeled using the - OF graph bindings specified in Documentation/devicetree/bindings/graph.txt. - The device can operate in single or dual input and output modes. When operating in single input mode, all pixels are received on port@0, @@ -43,34 +40,26 @@ properties: port@3 shall contain endpoints. properties: - '#address-cells': - const: 1 - - '#size-cells': - const: 0 - port@0: - type: object + $ref: /schemas/graph.yaml#/properties/port description: First LVDS input port port@1: - type: object + $ref: /schemas/graph.yaml#/properties/port description: Second LVDS input port port@2: - type: object + $ref: /schemas/graph.yaml#/properties/port description: First digital CMOS/TTL parallel output port@3: - type: object + $ref: /schemas/graph.yaml#/properties/port description: Second digital CMOS/TTL parallel output required: - port@0 - port@2 - additionalProperties: false - oe-gpios: maxItems: 1 description: Output enable GPIO signal, pin name "OE", active high. diff --git a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml index f8622bd0f61e..26932d2e86ab 100644 --- a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml +++ b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml @@ -71,54 +71,26 @@ properties: description: See ../../pwm/pwm.yaml for description of the cell formats. ports: - type: object - additionalProperties: false + $ref: /schemas/graph.yaml#/properties/ports properties: - "#address-cells": - const: 1 - - "#size-cells": - const: 0 - port@0: - type: object - additionalProperties: false - + $ref: /schemas/graph.yaml#/properties/port description: Video port for MIPI DSI input - properties: - reg: - const: 0 - - endpoint: - type: object - additionalProperties: false - properties: - remote-endpoint: true - - required: - - reg - port@1: - type: object - additionalProperties: false - + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false description: Video port for eDP output (panel or connector). properties: - reg: - const: 1 - endpoint: - type: object - additionalProperties: false + $ref: /schemas/graph.yaml#/$defs/endpoint-base + unevaluatedProperties: false properties: - remote-endpoint: true - data-lanes: oneOf: - minItems: 1 @@ -171,12 +143,7 @@ properties: dependencies: lane-polarities: [data-lanes] - required: - - reg - required: - - "#address-cells" - - "#size-cells" - port@0 - port@1 diff --git a/Documentation/devicetree/bindings/display/bridge/ti,tfp410.yaml b/Documentation/devicetree/bindings/display/bridge/ti,tfp410.yaml index 605831c1e836..4c5dd8ec2951 100644 --- a/Documentation/devicetree/bindings/display/bridge/ti,tfp410.yaml +++ b/Documentation/devicetree/bindings/display/bridge/ti,tfp410.yaml @@ -31,23 +31,18 @@ properties: maximum: 7 ports: - description: - A node containing input and output port nodes with endpoint - definitions as documented in - Documentation/devicetree/bindings/media/video-interfaces.txt - type: object + $ref: /schemas/graph.yaml#/properties/ports properties: port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false description: DPI input port. - type: object properties: - reg: - const: 0 - endpoint: - type: object + $ref: /schemas/graph.yaml#/$defs/endpoint-base + unevaluatedProperties: false properties: pclk-sample: @@ -67,15 +62,8 @@ properties: default: 24 port@1: + $ref: /schemas/graph.yaml#/properties/port description: DVI output port. - type: object - - properties: - reg: - const: 1 - - endpoint: - type: object required: - port@0 diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml index 195025e6803c..5216c27fc0ad 100644 --- a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml +++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml @@ -25,62 +25,20 @@ properties: description: Regulator for 1.2V internal core power. ports: - type: object + $ref: /schemas/graph.yaml#/properties/ports properties: - "#address-cells": - const: 1 - - "#size-cells": - const: 0 - port@0: - type: object - additionalProperties: false - - description: | + $ref: /schemas/graph.yaml#/properties/port + description: Video port for MIPI DSI input - properties: - reg: - const: 0 - - patternProperties: - endpoint: - type: object - additionalProperties: false - - properties: - remote-endpoint: true - - required: - - reg - port@1: - type: object - additionalProperties: false - - description: | + $ref: /schemas/graph.yaml#/properties/port + description: Video port for MIPI DPI output (panel or connector). - properties: - reg: - const: 1 - - patternProperties: - endpoint: - type: object - additionalProperties: false - - properties: - remote-endpoint: true - - required: - - reg - required: - - "#address-cells" - - "#size-cells" - port@0 - port@1 diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml index c036a75db8f7..eacfe7165083 100644 --- a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml +++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml @@ -42,65 +42,30 @@ properties: const: refclk ports: - type: object + $ref: /schemas/graph.yaml#/properties/ports properties: - "#address-cells": - const: 1 - - "#size-cells": - const: 0 - port@0: - type: object - additionalProperties: false - + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false description: | Video port for RGB input properties: - reg: - const: 0 - - patternProperties: endpoint: - type: object - additionalProperties: false + $ref: /schemas/graph.yaml#/$defs/endpoint-base + unevaluatedProperties: false properties: data-lines: enum: [ 16, 18, 24 ] - remote-endpoint: true - - required: - - reg - port@1: - type: object - additionalProperties: false - + $ref: /schemas/graph.yaml#/properties/port description: | Video port for DSI output (panel or connector). - properties: - reg: - const: 1 - - patternProperties: - endpoint: - type: object - additionalProperties: false - - properties: - remote-endpoint: true - - required: - - reg - required: - - "#address-cells" - - "#size-cells" - port@0 - port@1 @@ -156,4 +121,3 @@ examples: }; }; }; - diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml index b5959cc78b8d..10471c6c1ff9 100644 --- a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml +++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml @@ -42,31 +42,22 @@ properties: description: Hardware reset, Low active ports: - type: object - description: - A node containing input and output port nodes with endpoint definitions - as documented in - Documentation/devicetree/bindings/media/video-interfaces.txt - properties: - "#address-cells": - const: 1 - - "#size-cells": - const: 0 + $ref: /schemas/graph.yaml#/properties/ports + properties: port@0: - type: object + $ref: /schemas/graph.yaml#/properties/port description: | DSI Input. The remote endpoint phandle should be a reference to a valid mipi_dsi_host device node. port@1: - type: object + $ref: /schemas/graph.yaml#/properties/port description: | Video port for LVDS output (panel or connector). port@2: - type: object + $ref: /schemas/graph.yaml#/properties/port description: | Video port for Dual link LVDS output (panel or connector). diff --git a/Documentation/devicetree/bindings/display/connector/analog-tv-connector.yaml b/Documentation/devicetree/bindings/display/connector/analog-tv-connector.yaml index eebe88fed999..a31ca2d52b86 100644 --- a/Documentation/devicetree/bindings/display/connector/analog-tv-connector.yaml +++ b/Documentation/devicetree/bindings/display/connector/analog-tv-connector.yaml @@ -25,6 +25,7 @@ properties: $ref: /schemas/types.yaml#/definitions/uint32 port: + $ref: /schemas/graph.yaml#/properties/port description: Connection to controller providing analog TV signals required: diff --git a/Documentation/devicetree/bindings/display/connector/dp-connector.yaml b/Documentation/devicetree/bindings/display/connector/dp-connector.yaml index 1c17d60e7760..22792a79e7ce 100644 --- a/Documentation/devicetree/bindings/display/connector/dp-connector.yaml +++ b/Documentation/devicetree/bindings/display/connector/dp-connector.yaml @@ -26,7 +26,6 @@ properties: dp-pwr-supply: description: Power supply for the DP_PWR pin - maxItems: 1 port: $ref: /schemas/graph.yaml#/properties/port diff --git a/Documentation/devicetree/bindings/display/connector/dvi-connector.yaml b/Documentation/devicetree/bindings/display/connector/dvi-connector.yaml index 71cb9220fa59..93eb14294e68 100644 --- a/Documentation/devicetree/bindings/display/connector/dvi-connector.yaml +++ b/Documentation/devicetree/bindings/display/connector/dvi-connector.yaml @@ -36,6 +36,7 @@ properties: description: the connector has pins for DVI dual-link port: + $ref: /schemas/graph.yaml#/properties/port description: Connection to controller providing DVI signals required: diff --git a/Documentation/devicetree/bindings/display/connector/hdmi-connector.yaml b/Documentation/devicetree/bindings/display/connector/hdmi-connector.yaml index 14d7128af592..83c0d008265b 100644 --- a/Documentation/devicetree/bindings/display/connector/hdmi-connector.yaml +++ b/Documentation/devicetree/bindings/display/connector/hdmi-connector.yaml @@ -37,6 +37,7 @@ properties: maxItems: 1 port: + $ref: /schemas/graph.yaml#/properties/port description: Connection to controller providing HDMI signals required: diff --git a/Documentation/devicetree/bindings/display/connector/vga-connector.yaml b/Documentation/devicetree/bindings/display/connector/vga-connector.yaml index 5782c4bb3252..25f868002000 100644 --- a/Documentation/devicetree/bindings/display/connector/vga-connector.yaml +++ b/Documentation/devicetree/bindings/display/connector/vga-connector.yaml @@ -20,6 +20,7 @@ properties: $ref: /schemas/types.yaml#/definitions/phandle port: + $ref: /schemas/graph.yaml#/properties/port description: Connection to controller providing VGA signals required: diff --git a/Documentation/devicetree/bindings/display/ht16k33.txt b/Documentation/devicetree/bindings/display/ht16k33.txt deleted file mode 100644 index d5a8b070b467..000000000000 --- a/Documentation/devicetree/bindings/display/ht16k33.txt +++ /dev/null @@ -1,40 +0,0 @@ -Holtek ht16k33 RAM mapping 16*8 LED controller driver with keyscan -------------------------------------------------------------------------------- - -Required properties: -- compatible: "holtek,ht16k33" -- reg: I2C slave address of the chip. -- interrupts: Interrupt specification for the key pressed interrupt. -- refresh-rate-hz: Display update interval in HZ. -- debounce-delay-ms: Debouncing interval time in milliseconds. -- linux,keymap: The keymap for keys as described in the binding - document (devicetree/bindings/input/matrix-keymap.txt). - -Optional properties: -- linux,no-autorepeat: Disable keyrepeat. -- default-brightness-level: Initial brightness level [0-15] (default: 15). - -Example: - -&i2c1 { - ht16k33: ht16k33@70 { - compatible = "holtek,ht16k33"; - reg = <0x70>; - refresh-rate-hz = <20>; - debounce-delay-ms = <50>; - interrupt-parent = <&gpio4>; - interrupts = <5 (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING)>; - linux,keymap = < - MATRIX_KEY(2, 0, KEY_F6) - MATRIX_KEY(3, 0, KEY_F8) - MATRIX_KEY(4, 0, KEY_F10) - MATRIX_KEY(5, 0, KEY_F4) - MATRIX_KEY(6, 0, KEY_F2) - MATRIX_KEY(2, 1, KEY_F5) - MATRIX_KEY(3, 1, KEY_F7) - MATRIX_KEY(4, 1, KEY_F9) - MATRIX_KEY(5, 1, KEY_F3) - MATRIX_KEY(6, 1, KEY_F1) - >; - }; -}; diff --git a/Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml b/Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml index f1f25aa794d9..0091df9dd73b 100644 --- a/Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml +++ b/Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml @@ -74,7 +74,7 @@ properties: - description: Must be 400 MHz port: - type: object + $ref: /schemas/graph.yaml#/properties/port description: A port node pointing to the input port of a HDMI/DP or MIPI display bridge. diff --git a/Documentation/devicetree/bindings/display/ingenic,ipu.yaml b/Documentation/devicetree/bindings/display/ingenic,ipu.yaml index 12064a8e7a92..e679f48a3886 100644 --- a/Documentation/devicetree/bindings/display/ingenic,ipu.yaml +++ b/Documentation/devicetree/bindings/display/ingenic,ipu.yaml @@ -31,9 +31,8 @@ properties: clock-names: const: ipu -patternProperties: - "^ports?$": - description: OF graph bindings (specified in bindings/graph.txt). + port: + $ref: /schemas/graph.yaml#/properties/port required: - compatible diff --git a/Documentation/devicetree/bindings/display/ingenic,lcd.yaml b/Documentation/devicetree/bindings/display/ingenic,lcd.yaml index 768050f30dba..50d2b0a50e8a 100644 --- a/Documentation/devicetree/bindings/display/ingenic,lcd.yaml +++ b/Documentation/devicetree/bindings/display/ingenic,lcd.yaml @@ -39,18 +39,18 @@ properties: minItems: 1 port: - description: OF graph bindings (specified in bindings/graph.txt). + $ref: /schemas/graph.yaml#/properties/port ports: - description: OF graph bindings (specified in bindings/graph.txt). - type: object + $ref: /schemas/graph.yaml#/properties/ports + properties: port@0: - type: object + $ref: /schemas/graph.yaml#/properties/port description: DPI output, to interface with TFT panels. port@8: - type: object + $ref: /schemas/graph.yaml#/properties/port description: Link to the Image Processing Unit (IPU). (See ingenic,ipu.yaml). diff --git a/Documentation/devicetree/bindings/display/intel,keembay-display.yaml b/Documentation/devicetree/bindings/display/intel,keembay-display.yaml index 0a697d45c2ad..bc6622b010ca 100644 --- a/Documentation/devicetree/bindings/display/intel,keembay-display.yaml +++ b/Documentation/devicetree/bindings/display/intel,keembay-display.yaml @@ -36,7 +36,7 @@ properties: maxItems: 1 port: - type: object + $ref: /schemas/graph.yaml#/properties/port description: Display output node to DSI. required: diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt index 33977e15bebd..93b160df3eec 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt @@ -23,7 +23,7 @@ connected to. For a description of the display interface sink function blocks, see Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt and -Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt. +Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml. Required properties (all function blocks): - compatible: "mediatek,<chip>-disp-<function>", one of @@ -37,13 +37,14 @@ Required properties (all function blocks): "mediatek,<chip>-disp-aal" - adaptive ambient light controller "mediatek,<chip>-disp-gamma" - gamma correction "mediatek,<chip>-disp-merge" - merge streams from two RDMA sources + "mediatek,<chip>-disp-postmask" - control round corner for display frame "mediatek,<chip>-disp-split" - split stream to two encoders "mediatek,<chip>-disp-ufoe" - data compression engine "mediatek,<chip>-dsi" - DSI controller, see mediatek,dsi.txt "mediatek,<chip>-dpi" - DPI controller, see mediatek,dpi.txt "mediatek,<chip>-disp-mutex" - display mutex "mediatek,<chip>-disp-od" - overdrive - the supported chips are mt2701, mt7623, mt2712, mt8167 and mt8173. + the supported chips are mt2701, mt7623, mt2712, mt8167, mt8173, mt8183 and mt8192. - reg: Physical base address and length of the function block register space - interrupts: The interrupt signal from the function block (required, except for merge and split function blocks). @@ -61,11 +62,19 @@ Required properties (DMA function blocks): "mediatek,<chip>-disp-wdma" the supported chips are mt2701, mt8167 and mt8173. - larb: Should contain a phandle pointing to the local arbiter device as defined - in Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt + in Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml - iommus: Should point to the respective IOMMU block with master port as argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt for details. +Optional properties (RDMA function blocks): +- mediatek,rdma-fifo-size: rdma fifo size may be different even in same SOC, add this + property to the corresponding rdma + the value is the Max value which defined in hardware data sheet. + mediatek,rdma-fifo-size of mt8173-rdma0 is 8K + mediatek,rdma-fifo-size of mt8183-rdma0 is 5K + mediatek,rdma-fifo-size of mt8183-rdma1 is 2K + Examples: mmsys: clock-controller@14000000 { @@ -103,6 +112,7 @@ rdma0: rdma@1400e000 { clocks = <&mmsys CLK_MM_DISP_RDMA0>; iommus = <&iommu M4U_PORT_DISP_RDMA0>; mediatek,larb = <&larb0>; + mediatek,rdma-fifosize = <8192>; }; rdma1: rdma@1400f000 { diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt index f06f24d405a5..8238a86686be 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt @@ -22,23 +22,7 @@ Required properties: MIPI TX Configuration Module ============================ -The MIPI TX configuration module controls the MIPI D-PHY. - -Required properties: -- compatible: "mediatek,<chip>-mipi-tx" -- the supported chips are mt2701, 7623, mt8173 and mt8183. -- reg: Physical base address and length of the controller's registers -- clocks: PLL reference clock -- clock-output-names: name of the output clock line to the DSI encoder -- #clock-cells: must be <0>; -- #phy-cells: must be <0>. - -Optional properties: -- drive-strength-microamp: adjust driving current, should be 3000 ~ 6000. And - the step is 200. -- nvmem-cells: A phandle to the calibration data provided by a nvmem device. If - unspecified default values shall be used. -- nvmem-cell-names: Should be "calibration-data" +See phy/mediatek,dsi-phy.yaml Example: diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.txt index 6b1c586403e4..b284ca51b913 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.txt +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.txt @@ -53,23 +53,7 @@ Required properties: HDMI PHY ======== - -The HDMI PHY serializes the HDMI encoder's three channel 10-bit parallel -output and drives the HDMI pads. - -Required properties: -- compatible: "mediatek,<chip>-hdmi-phy" -- the supported chips are mt2701, mt7623 and mt8173 -- reg: Physical base address and length of the module's registers -- clocks: PLL reference clock -- clock-names: must contain "pll_ref" -- clock-output-names: must be "hdmitx_dig_cts" on mt8173 -- #phy-cells: must be <0> -- #clock-cells: must be <0> - -Optional properties: -- mediatek,ibias: TX DRV bias current for <1.65Gbps, defaults to 0xa -- mediatek,ibias_up: TX DRV bias current for >1.65Gbps, defaults to 0x1c +See phy/mediatek,hdmi-phy.yaml Example: diff --git a/Documentation/devicetree/bindings/display/panel/advantech,idk-2121wr.yaml b/Documentation/devicetree/bindings/display/panel/advantech,idk-2121wr.yaml index 6b7fddc80c41..67682fe77f10 100644 --- a/Documentation/devicetree/bindings/display/panel/advantech,idk-2121wr.yaml +++ b/Documentation/devicetree/bindings/display/panel/advantech,idk-2121wr.yaml @@ -37,34 +37,33 @@ properties: panel-timing: true ports: - type: object + $ref: /schemas/graph.yaml#/properties/ports + properties: port@0: - type: object + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false description: The sink for odd pixels. properties: - reg: - const: 0 - dual-lvds-odd-pixels: true required: - - reg - dual-lvds-odd-pixels port@1: - type: object + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false description: The sink for even pixels. properties: - reg: - const: 1 - dual-lvds-even-pixels: true required: - - reg - dual-lvds-even-pixels + required: + - port@0 + - port@1 + additionalProperties: false required: diff --git a/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.yaml b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.yaml index b8b9435e464c..4f92365e888a 100644 --- a/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.yaml +++ b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.yaml @@ -30,6 +30,7 @@ properties: power supply for LCM (1.8V) dcdc-en-gpios: + maxItems: 1 description: | phandle of the gpio for power ic line Power IC supply enable, High active diff --git a/Documentation/devicetree/bindings/display/panel/mantix,mlaf057we51-x.yaml b/Documentation/devicetree/bindings/display/panel/mantix,mlaf057we51-x.yaml index 9e78f2e60f99..a4b8569ab81c 100644 --- a/Documentation/devicetree/bindings/display/panel/mantix,mlaf057we51-x.yaml +++ b/Documentation/devicetree/bindings/display/panel/mantix,mlaf057we51-x.yaml @@ -38,7 +38,8 @@ properties: reset-gpios: true - 'mantix,tp-rstn-gpios': + mantix,tp-rstn-gpios: + maxItems: 1 description: second reset line that triggers DSI config load backlight: true diff --git a/Documentation/devicetree/bindings/display/panel/novatek,nt36672a.yaml b/Documentation/devicetree/bindings/display/panel/novatek,nt36672a.yaml index 2f5df1d235ae..ef4c0a24512d 100644 --- a/Documentation/devicetree/bindings/display/panel/novatek,nt36672a.yaml +++ b/Documentation/devicetree/bindings/display/panel/novatek,nt36672a.yaml @@ -30,6 +30,7 @@ properties: panel. The novatek,nt36672a compatible shall always be provided as a fallback. reset-gpios: + maxItems: 1 description: phandle of gpio for reset line - This should be 8mA, gpio can be configured using mux, pinctrl, pinctrl-names (active high) diff --git a/Documentation/devicetree/bindings/display/panel/panel-common.yaml b/Documentation/devicetree/bindings/display/panel/panel-common.yaml index cd6dc5461721..5b38dc89cb21 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-common.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-common.yaml @@ -68,16 +68,7 @@ properties: # Connectivity port: - type: object - - ports: - type: object - description: - Panels receive video data through one or multiple connections. While - the nature of those connections is specific to the panel type, the - connectivity is expressed in a standard fashion using ports as specified - in the device graph bindings defined in - Documentation/devicetree/bindings/graph.txt. + $ref: /schemas/graph.yaml#/properties/port ddc-i2c-bus: $ref: /schemas/types.yaml#/definitions/phandle diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml index 35b42ee4ed1d..62b0d54d87b7 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml @@ -107,26 +107,27 @@ properties: - dlc,dlc1010gig # Emerging Display Technology Corp. 3.5" QVGA TFT LCD panel - edt,et035012dm6 + # Emerging Display Technology Corp. 5.7" VGA TFT LCD panel + - edt,et057090dhu + - edt,et070080dh6 # Emerging Display Technology Corp. 480x272 TFT Display with capacitive touch - edt,etm043080dh6gp # Emerging Display Technology Corp. 480x272 TFT Display - edt,etm0430g0dh6 - # Emerging Display Technology Corp. 5.7" VGA TFT LCD panel - - edt,et057090dhu - # Emerging Display Technology Corp. WVGA TFT Display with capacitive touch - - edt,etm070080dh6 - # Emerging Display Technology Corp. WVGA TFT Display with capacitive touch - - edt,etm0700g0dh6 # Emerging Display Technology Corp. WVGA TFT Display with capacitive touch # Same as ETM0700G0DH6 but with inverted pixel clock. - edt,etm070080bdh6 # Emerging Display Technology Corp. WVGA TFT Display with capacitive touch + # Same timings as the ETM0700G0DH6, but with resistive touch. + - edt,etm070080dh6 + # Emerging Display Technology Corp. WVGA TFT Display with capacitive touch # Same display as the ETM0700G0BDH6, but with changed hardware for the # backlight and the touch interface. - edt,etm070080edh6 + - edt,etm0700g0bdh6 # Emerging Display Technology Corp. WVGA TFT Display with capacitive touch - # Same timings as the ETM0700G0DH6, but with resistive touch. - - edt,etm070080dh6 + - edt,etm0700g0dh6 + - edt,etm0700g0edh6 # Evervision Electronics Co. Ltd. VGG804821 5.0" WVGA TFT LCD Panel - evervision,vgg804821 # Foxlink Group 5" WVGA TFT LCD panel @@ -175,6 +176,8 @@ properties: - koe,tx26d202vm0bwa # Kaohsiung Opto-Electronics. TX31D200VM0BAA 12.3" HSXGA LVDS panel - koe,tx31d200vm0baa + # Kyocera Corporation 7" WVGA (800x480) transmissive color TFT + - kyo,tcg070wvlq # Kyocera Corporation 12.1" XGA (1024x768) TFT LCD panel - kyo,tcg121xglp # LeMaker BL035-RGB-002 3.5" QVGA TFT LCD panel diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e63m0.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6e63m0.yaml index 1dab80ae1d0a..ea58df49263a 100644 --- a/Documentation/devicetree/bindings/display/panel/samsung,s6e63m0.yaml +++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e63m0.yaml @@ -11,6 +11,7 @@ maintainers: allOf: - $ref: panel-common.yaml# + - $ref: /schemas/leds/backlight/common.yaml# properties: compatible: @@ -19,6 +20,8 @@ properties: reg: true reset-gpios: true port: true + default-brightness: true + max-brightness: true vdd3-supply: description: VDD regulator @@ -31,7 +34,6 @@ required: - reset-gpios - vdd3-supply - vci-supply - - port unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3066-hdmi.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3066-hdmi.yaml index 4110d003ce1f..008c144257cb 100644 --- a/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3066-hdmi.yaml +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3066-hdmi.yaml @@ -43,34 +43,24 @@ properties: This soc uses GRF regs to switch the HDMI TX input between vop0 and vop1. ports: - type: object + $ref: /schemas/graph.yaml#/properties/ports properties: - "#address-cells": - const: 1 - - "#size-cells": - const: 0 - port@0: - type: object + $ref: /schemas/graph.yaml#/properties/port description: Port node with two endpoints, numbered 0 and 1, connected respectively to vop0 and vop1. port@1: - type: object + $ref: /schemas/graph.yaml#/properties/port description: Port node with one endpoint connected to a hdmi-connector node. required: - - "#address-cells" - - "#size-cells" - port@0 - port@1 - additionalProperties: false - required: - compatible - reg diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml index ed8148e26e24..6f43d885c9b3 100644 --- a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml @@ -70,10 +70,7 @@ properties: - const: dclk port: - type: object - description: - A port node with endpoint definitions as defined in - Documentation/devicetree/bindings/media/video-interfaces.txt. + $ref: /schemas/graph.yaml#/properties/port assigned-clocks: maxItems: 2 diff --git a/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml b/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml index 327a14d85df8..679daed4124e 100644 --- a/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml +++ b/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml @@ -51,20 +51,16 @@ properties: Phandle of the regulator that provides the supply voltage. ports: - type: object - description: - A node containing DSI input & output port nodes with endpoint - definitions as documented in - Documentation/devicetree/bindings/media/video-interfaces.txt - Documentation/devicetree/bindings/graph.txt + $ref: /schemas/graph.yaml#/properties/ports + properties: port@0: - type: object + $ref: /schemas/graph.yaml#/properties/port description: DSI input port node, connected to the ltdc rgb output port. port@1: - type: object + $ref: /schemas/graph.yaml#/properties/port description: DSI output port node, connected to a panel or a bridge input port" diff --git a/Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml b/Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml index bf8ad916e9b0..d54f9ca207af 100644 --- a/Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml +++ b/Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml @@ -35,15 +35,13 @@ properties: maxItems: 1 port: - type: object - description: - "Video port for DPI RGB output. + $ref: /schemas/graph.yaml#/properties/port + description: | + Video port for DPI RGB output. ltdc has one video port with up to 2 endpoints: - for external dpi rgb panel or bridge, using gpios. - for internal dpi input of the MIPI DSI host controller. Note: These 2 endpoints cannot be activated simultaneously. - Please refer to the bindings defined in - Documentation/devicetree/bindings/media/video-interfaces.txt." required: - compatible diff --git a/Documentation/devicetree/bindings/display/ste,mcde.yaml b/Documentation/devicetree/bindings/display/ste,mcde.yaml index 830c9b4091cc..de0c678b3c29 100644 --- a/Documentation/devicetree/bindings/display/ste,mcde.yaml +++ b/Documentation/devicetree/bindings/display/ste,mcde.yaml @@ -42,10 +42,9 @@ properties: description: a phandle to the analog voltage regulator port: - type: object + $ref: /schemas/graph.yaml#/properties/port description: - A DPI port node with endpoint definitions as defined in - Documentation/devicetree/bindings/media/video-interfaces.txt + A DPI port node "#address-cells": const: 1 diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt index 34d993338453..8a6d3e1ee306 100644 --- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt +++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt @@ -111,8 +111,8 @@ of the following host1x client modules: endpoint (required node) Required properties: - - data-lanes: an array of data lane from 1 to 4. Valid array - lengths are 1/2/4. + - data-lanes: an array of data lane from 1 to 8. Valid array + lengths are 1/2/4/8. - remote-endpoint: phandle to sensor 'endpoint' node. port@1 (required node) diff --git a/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml b/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml index 4dc30738ee57..781c1868b0b8 100644 --- a/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml +++ b/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml @@ -74,30 +74,19 @@ properties: type: boolean ports: - type: object - description: - Ports as described in Documentation/devicetree/bindings/graph.txt - properties: - "#address-cells": - const: 1 - - "#size-cells": - const: 0 + $ref: /schemas/graph.yaml#/properties/ports + properties: port@0: - type: object + $ref: /schemas/graph.yaml#/properties/port description: The DSS OLDI output port node form video port 1 port@1: - type: object + $ref: /schemas/graph.yaml#/properties/port description: The DSS DPI output port node from video port 2 - required: - - "#address-cells" - - "#size-cells" - ti,am65x-oldi-io-ctrl: $ref: "/schemas/types.yaml#/definitions/phandle-array" maxItems: 1 diff --git a/Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml b/Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml index c9a947d55fa4..2986f9acc9f0 100644 --- a/Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml +++ b/Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml @@ -107,40 +107,29 @@ properties: type: boolean ports: - type: object - description: - Ports as described in Documentation/devicetree/bindings/graph.txt - properties: - "#address-cells": - const: 1 - - "#size-cells": - const: 0 + $ref: /schemas/graph.yaml#/properties/ports + properties: port@0: - type: object + $ref: /schemas/graph.yaml#/properties/port description: The output port node form video port 1 port@1: - type: object + $ref: /schemas/graph.yaml#/properties/port description: The output port node from video port 2 port@2: - type: object + $ref: /schemas/graph.yaml#/properties/port description: The output port node from video port 3 port@3: - type: object + $ref: /schemas/graph.yaml#/properties/port description: The output port node from video port 4 - required: - - "#address-cells" - - "#size-cells" - max-memory-bandwidth: $ref: /schemas/types.yaml#/definitions/uint32 description: diff --git a/Documentation/devicetree/bindings/display/ti/ti,k2g-dss.yaml b/Documentation/devicetree/bindings/display/ti/ti,k2g-dss.yaml index 8f87b82c6695..7ce7bbad5780 100644 --- a/Documentation/devicetree/bindings/display/ti/ti,k2g-dss.yaml +++ b/Documentation/devicetree/bindings/display/ti/ti,k2g-dss.yaml @@ -54,9 +54,8 @@ properties: description: phandle to the associated power domain port: - type: object + $ref: /schemas/graph.yaml#/properties/port description: - Port as described in Documentation/devicetree/bindings/graph.txt. The DSS DPI output port node max-memory-bandwidth: |