diff options
Diffstat (limited to 'Documentation/devicetree/bindings/display')
21 files changed, 534 insertions, 344 deletions
diff --git a/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml b/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml index 343598c9f473..2e208d2fc98f 100644 --- a/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml +++ b/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml @@ -150,4 +150,3 @@ examples: }; }; }; - diff --git a/Documentation/devicetree/bindings/display/arm,hdlcd.txt b/Documentation/devicetree/bindings/display/arm,hdlcd.txt deleted file mode 100644 index 78bc24296f3e..000000000000 --- a/Documentation/devicetree/bindings/display/arm,hdlcd.txt +++ /dev/null @@ -1,79 +0,0 @@ -ARM HDLCD - -This is a display controller found on several development platforms produced -by ARM Ltd and in more modern of its' Fast Models. The HDLCD is an RGB -streamer that reads the data from a framebuffer and sends it to a single -digital encoder (DVI or HDMI). - -Required properties: - - compatible: "arm,hdlcd" - - reg: Physical base address and length of the controller's registers. - - interrupts: One interrupt used by the display controller to notify the - interrupt controller when any of the interrupt sources programmed in - the interrupt mask register have activated. - - clocks: A list of phandle + clock-specifier pairs, one for each - entry in 'clock-names'. - - clock-names: A list of clock names. For HDLCD it should contain: - - "pxlclk" for the clock feeding the output PLL of the controller. - -Required sub-nodes: - - port: The HDLCD connection to an encoder chip. The connection is modeled - using the OF graph bindings specified in - Documentation/devicetree/bindings/graph.txt. - -Optional properties: - - memory-region: phandle to a node describing memory (see - Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt) to be - used for the framebuffer; if not present, the framebuffer may be located - anywhere in memory. - - -Example: - -/ { - ... - - hdlcd@2b000000 { - compatible = "arm,hdlcd"; - reg = <0 0x2b000000 0 0x1000>; - interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&oscclk5>; - clock-names = "pxlclk"; - port { - hdlcd_output: endpoint@0 { - remote-endpoint = <&hdmi_enc_input>; - }; - }; - }; - - /* HDMI encoder on I2C bus */ - i2c@7ffa0000 { - .... - hdmi-transmitter@70 { - compatible = "....."; - reg = <0x70>; - port@0 { - hdmi_enc_input: endpoint { - remote-endpoint = <&hdlcd_output>; - }; - - hdmi_enc_output: endpoint { - remote-endpoint = <&hdmi_1_port>; - }; - }; - }; - - }; - - hdmi1: connector@1 { - compatible = "hdmi-connector"; - type = "a"; - port { - hdmi_1_port: endpoint { - remote-endpoint = <&hdmi_enc_output>; - }; - }; - }; - - ... -}; diff --git a/Documentation/devicetree/bindings/display/arm,hdlcd.yaml b/Documentation/devicetree/bindings/display/arm,hdlcd.yaml new file mode 100644 index 000000000000..a2670258c48d --- /dev/null +++ b/Documentation/devicetree/bindings/display/arm,hdlcd.yaml @@ -0,0 +1,89 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/arm,hdlcd.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Arm HDLCD display controller binding + +maintainers: + - Liviu Dudau <Liviu.Dudau@arm.com> + - Andre Przywara <andre.przywara@arm.com> + +description: + The Arm HDLCD is a display controller found on several development platforms + produced by ARM Ltd and in more modern of its Fast Models. The HDLCD is an + RGB streamer that reads the data from a framebuffer and sends it to a single + digital encoder (DVI or HDMI). + +properties: + compatible: + const: arm,hdlcd + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clock-names: + const: pxlclk + + clocks: + maxItems: 1 + description: The input reference for the pixel clock. + + memory-region: + maxItems: 1 + description: + Phandle to a node describing memory to be used for the framebuffer. + If not present, the framebuffer may be located anywhere in memory. + + iommus: + maxItems: 1 + + port: + $ref: /schemas/graph.yaml#/properties/port + unevaluatedProperties: false + description: + Output endpoint of the controller, connecting the LCD panel signals. + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + - port + +examples: + - | + hdlcd@2b000000 { + compatible = "arm,hdlcd"; + reg = <0x2b000000 0x1000>; + interrupts = <0 85 4>; + clocks = <&oscclk5>; + clock-names = "pxlclk"; + port { + hdlcd_output: endpoint { + remote-endpoint = <&hdmi_enc_input>; + }; + }; + }; + + /* HDMI encoder on I2C bus */ + i2c { + #address-cells = <1>; + #size-cells = <0>; + hdmi-transmitter@70 { + compatible = "nxp,tda998x"; + reg = <0x70>; + port { + hdmi_enc_input: endpoint { + remote-endpoint = <&hdlcd_output>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/arm,komeda.txt b/Documentation/devicetree/bindings/display/arm,komeda.txt deleted file mode 100644 index 8513695ee47f..000000000000 --- a/Documentation/devicetree/bindings/display/arm,komeda.txt +++ /dev/null @@ -1,78 +0,0 @@ -Device Tree bindings for Arm Komeda display driver - -Required properties: -- compatible: Should be "arm,mali-d71" -- reg: Physical base address and length of the registers in the system -- interrupts: the interrupt line number of the device in the system -- clocks: A list of phandle + clock-specifier pairs, one for each entry - in 'clock-names' -- clock-names: A list of clock names. It should contain: - - "aclk": for the main processor clock -- #address-cells: Must be 1 -- #size-cells: Must be 0 -- iommus: configure the stream id to IOMMU, Must be configured if want to - enable iommu in display. for how to configure this node please reference - devicetree/bindings/iommu/arm,smmu-v3.txt, - devicetree/bindings/iommu/iommu.txt - -Required properties for sub-node: pipeline@nq -Each device contains one or two pipeline sub-nodes (at least one), each -pipeline node should provide properties: -- reg: Zero-indexed identifier for the pipeline -- clocks: A list of phandle + clock-specifier pairs, one for each entry - in 'clock-names' -- clock-names: should contain: - - "pxclk": pixel clock - -- port: each pipeline connect to an encoder input port. The connection is - modeled using the OF graph bindings specified in - Documentation/devicetree/bindings/graph.txt - -Optional properties: - - memory-region: phandle to a node describing memory (see - Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt) - to be used for the framebuffer; if not present, the framebuffer may - be located anywhere in memory. - -Example: -/ { - ... - - dp0: display@c00000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "arm,mali-d71"; - reg = <0xc00000 0x20000>; - interrupts = <0 168 4>; - clocks = <&dpu_aclk>; - clock-names = "aclk"; - iommus = <&smmu 0>, <&smmu 1>, <&smmu 2>, <&smmu 3>, - <&smmu 4>, <&smmu 5>, <&smmu 6>, <&smmu 7>, - <&smmu 8>, <&smmu 9>; - - dp0_pipe0: pipeline@0 { - clocks = <&fpgaosc2>; - clock-names = "pxclk"; - reg = <0>; - - port { - dp0_pipe0_out: endpoint { - remote-endpoint = <&db_dvi0_in>; - }; - }; - }; - - dp0_pipe1: pipeline@1 { - clocks = <&fpgaosc2>; - clock-names = "pxclk"; - reg = <1>; - - port { - dp0_pipe1_out: endpoint { - remote-endpoint = <&db_dvi1_in>; - }; - }; - }; - }; - ... -}; diff --git a/Documentation/devicetree/bindings/display/arm,komeda.yaml b/Documentation/devicetree/bindings/display/arm,komeda.yaml new file mode 100644 index 000000000000..9f4aade97f10 --- /dev/null +++ b/Documentation/devicetree/bindings/display/arm,komeda.yaml @@ -0,0 +1,130 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/arm,komeda.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Arm Komeda display processor + +maintainers: + - Liviu Dudau <Liviu.Dudau@arm.com> + - Andre Przywara <andre.przywara@arm.com> + +description: + The Arm Mali D71 display processor supports up to two displays with up + to a 4K resolution each. Each pipeline can be composed of up to four + layers. It is typically connected to a digital display connector like HDMI. + +properties: + compatible: + oneOf: + - items: + - const: arm,mali-d32 + - const: arm,mali-d71 + - const: arm,mali-d71 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clock-names: + const: aclk + + clocks: + maxItems: 1 + description: The main DPU processor clock + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + memory-region: + maxItems: 1 + description: + Phandle to a node describing memory to be used for the framebuffer. + If not present, the framebuffer may be located anywhere in memory. + + iommus: + description: + The stream IDs for each of the used pipelines, each four IDs for the + four layers, plus one for the write-back stream. + minItems: 5 + maxItems: 10 + +patternProperties: + '^pipeline@[01]$': + type: object + description: + clocks + + properties: + reg: + enum: [ 0, 1 ] + + clock-names: + const: pxclk + + clocks: + maxItems: 1 + description: The input reference for the pixel clock. + + port: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + +additionalProperties: false + +required: + - "#address-cells" + - "#size-cells" + - compatible + - reg + - interrupts + - clock-names + - clocks + - pipeline@0 + +examples: + - | + display@c00000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "arm,mali-d71"; + reg = <0xc00000 0x20000>; + interrupts = <168>; + clocks = <&dpu_aclk>; + clock-names = "aclk"; + iommus = <&smmu 0>, <&smmu 1>, <&smmu 2>, <&smmu 3>, + <&smmu 8>, + <&smmu 4>, <&smmu 5>, <&smmu 6>, <&smmu 7>, + <&smmu 9>; + + dp0_pipe0: pipeline@0 { + clocks = <&fpgaosc2>; + clock-names = "pxclk"; + reg = <0>; + + port { + dp0_pipe0_out: endpoint { + remote-endpoint = <&db_dvi0_in>; + }; + }; + }; + + dp0_pipe1: pipeline@1 { + clocks = <&fpgaosc2>; + clock-names = "pxclk"; + reg = <1>; + + port { + dp0_pipe1_out: endpoint { + remote-endpoint = <&db_dvi1_in>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/arm,malidp.txt b/Documentation/devicetree/bindings/display/arm,malidp.txt deleted file mode 100644 index 7a97a2b48c2a..000000000000 --- a/Documentation/devicetree/bindings/display/arm,malidp.txt +++ /dev/null @@ -1,68 +0,0 @@ -ARM Mali-DP - -The following bindings apply to a family of Display Processors sold as -licensable IP by ARM Ltd. The bindings describe the Mali DP500, DP550 and -DP650 processors that offer multiple composition layers, support for -rotation and scaling output. - -Required properties: - - compatible: should be one of - "arm,mali-dp500" - "arm,mali-dp550" - "arm,mali-dp650" - depending on the particular implementation present in the hardware - - reg: Physical base address and size of the block of registers used by - the processor. - - interrupts: Interrupt list, as defined in ../interrupt-controller/interrupts.txt, - interrupt client nodes. - - interrupt-names: name of the engine inside the processor that will - use the corresponding interrupt. Should be one of "DE" or "SE". - - clocks: A list of phandle + clock-specifier pairs, one for each entry - in 'clock-names' - - clock-names: A list of clock names. It should contain: - - "pclk": for the APB interface clock - - "aclk": for the AXI interface clock - - "mclk": for the main processor clock - - "pxlclk": for the pixel clock feeding the output PLL of the processor. - - arm,malidp-output-port-lines: Array of u8 values describing the number - of output lines per channel (R, G and B). - -Required sub-nodes: - - port: The Mali DP connection to an encoder input port. The connection - is modelled using the OF graph bindings specified in - Documentation/devicetree/bindings/graph.txt - -Optional properties: - - memory-region: phandle to a node describing memory (see - Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt) - to be used for the framebuffer; if not present, the framebuffer may - be located anywhere in memory. - - arm,malidp-arqos-high-level: integer of u32 value describing the ARQoS - levels of DP500's QoS signaling. - - -Example: - -/ { - ... - - dp0: malidp@6f200000 { - compatible = "arm,mali-dp650"; - reg = <0 0x6f200000 0 0x20000>; - memory-region = <&display_reserved>; - interrupts = <0 168 IRQ_TYPE_LEVEL_HIGH>, - <0 168 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "DE", "SE"; - clocks = <&oscclk2>, <&fpgaosc0>, <&fpgaosc1>, <&fpgaosc1>; - clock-names = "pxlclk", "mclk", "aclk", "pclk"; - arm,malidp-output-port-lines = /bits/ 8 <8 8 8>; - arm,malidp-arqos-high-level = <0xd000d000>; - port { - dp0_output: endpoint { - remote-endpoint = <&tda998x_2_input>; - }; - }; - }; - - ... -}; diff --git a/Documentation/devicetree/bindings/display/arm,malidp.yaml b/Documentation/devicetree/bindings/display/arm,malidp.yaml new file mode 100644 index 000000000000..795a08ac9f12 --- /dev/null +++ b/Documentation/devicetree/bindings/display/arm,malidp.yaml @@ -0,0 +1,124 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/arm,malidp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Arm Mali Display Processor (Mali-DP) binding + +maintainers: + - Liviu Dudau <Liviu.Dudau@arm.com> + - Andre Przywara <andre.przywara@arm.com> + +description: + The following bindings apply to a family of Display Processors sold as + licensable IP by ARM Ltd. The bindings describe the Mali DP500, DP550 and + DP650 processors that offer multiple composition layers, support for + rotation and scaling output. + +properties: + compatible: + enum: + - arm,mali-dp500 + - arm,mali-dp550 + - arm,mali-dp650 + + reg: + maxItems: 1 + + interrupts: + items: + - description: + The interrupt used by the Display Engine (DE). Can be shared with + the interrupt for the Scaling Engine (SE), but it will have to be + listed individually. + - description: + The interrupt used by the Scaling Engine (SE). Can be shared with + the interrupt for the Display Engine (DE), but it will have to be + listed individually. + + interrupt-names: + items: + - const: DE + - const: SE + + clock-names: + items: + - const: pxlclk + - const: mclk + - const: aclk + - const: pclk + + clocks: + items: + - description: the pixel clock feeding the output PLL of the processor + - description: the main processor clock + - description: the AXI interface clock + - description: the APB interface clock + + memory-region: + maxItems: 1 + description: + Phandle to a node describing memory to be used for the framebuffer. + If not present, the framebuffer may be located anywhere in memory. + + arm,malidp-output-port-lines: + $ref: /schemas/types.yaml#/definitions/uint8-array + description: + Number of output lines/bits for each colour channel. + items: + - description: number of output lines for the red channel (R) + - description: number of output lines for the green channel (G) + - description: number of output lines for the blue channel (B) + + arm,malidp-arqos-high-level: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + integer describing the ARQoS levels of DP500's QoS signaling + + arm,malidp-arqos-value: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Quality-of-Service value for the display engine FIFOs, to write + into the RQOS register of the DP500. + See the ARM Mali-DP500 TRM for details on the encoding. + If omitted, the RQOS register will not be changed. + + port: + $ref: /schemas/graph.yaml#/properties/port + unevaluatedProperties: false + description: + Output endpoint of the controller, connecting the LCD panel signals. + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + - interrupt-names + - clocks + - clock-names + - port + - arm,malidp-output-port-lines + +examples: + - | + dp0: malidp@6f200000 { + compatible = "arm,mali-dp650"; + reg = <0x6f200000 0x20000>; + memory-region = <&display_reserved>; + interrupts = <168>, <168>; + interrupt-names = "DE", "SE"; + clocks = <&oscclk2>, <&fpgaosc0>, <&fpgaosc1>, <&fpgaosc1>; + clock-names = "pxlclk", "mclk", "aclk", "pclk"; + arm,malidp-output-port-lines = /bits/ 8 <8 8 8>; + arm,malidp-arqos-high-level = <0xd000d000>; + + port { + dp0_output: endpoint { + remote-endpoint = <&tda998x_2_input>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/arm,pl11x.txt b/Documentation/devicetree/bindings/display/arm,pl11x.txt deleted file mode 100644 index 3f977e72a200..000000000000 --- a/Documentation/devicetree/bindings/display/arm,pl11x.txt +++ /dev/null @@ -1,110 +0,0 @@ -* ARM PrimeCell Color LCD Controller PL110/PL111 - -See also Documentation/devicetree/bindings/arm/primecell.yaml - -Required properties: - -- compatible: must be one of: - "arm,pl110", "arm,primecell" - "arm,pl111", "arm,primecell" - -- reg: base address and size of the control registers block - -- interrupt-names: either the single entry "combined" representing a - combined interrupt output (CLCDINTR), or the four entries - "mbe", "vcomp", "lnbu", "fuf" representing the individual - CLCDMBEINTR, CLCDVCOMPINTR, CLCDLNBUINTR, CLCDFUFINTR interrupts - -- interrupts: contains an interrupt specifier for each entry in - interrupt-names - -- clock-names: should contain "clcdclk" and "apb_pclk" - -- clocks: contains phandle and clock specifier pairs for the entries - in the clock-names property. See - Documentation/devicetree/bindings/clock/clock-bindings.txt - -Optional properties: - -- memory-region: phandle to a node describing memory (see - Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt) - to be used for the framebuffer; if not present, the framebuffer - may be located anywhere in the memory - -- max-memory-bandwidth: maximum bandwidth in bytes per second that the - cell's memory interface can handle; if not present, the memory - interface is fast enough to handle all possible video modes - -Required sub-nodes: - -- port: describes LCD panel signals, following the common binding - for video transmitter interfaces; see - Documentation/devicetree/bindings/media/video-interfaces.txt - -Deprecated properties: - The port's endbpoint subnode had this, now deprecated property - in the past. Drivers should be able to survive without it: - - - arm,pl11x,tft-r0g0b0-pads: an array of three 32-bit values, - defining the way CLD pads are wired up; first value - contains index of the "CLD" external pin (pad) used - as R0 (first bit of the red component), second value - index of the pad used as G0, third value index of the - pad used as B0, see also "LCD panel signal multiplexing - details" paragraphs in the PL110/PL111 Technical - Reference Manuals; this implicitly defines available - color modes, for example: - - PL111 TFT 4:4:4 panel: - arm,pl11x,tft-r0g0b0-pads = <4 15 20>; - - PL110 TFT (1:)5:5:5 panel: - arm,pl11x,tft-r0g0b0-pads = <1 7 13>; - - PL111 TFT (1:)5:5:5 panel: - arm,pl11x,tft-r0g0b0-pads = <3 11 19>; - - PL111 TFT 5:6:5 panel: - arm,pl11x,tft-r0g0b0-pads = <3 10 19>; - - PL110 and PL111 TFT 8:8:8 panel: - arm,pl11x,tft-r0g0b0-pads = <0 8 16>; - - PL110 and PL111 TFT 8:8:8 panel, R & B components swapped: - arm,pl11x,tft-r0g0b0-pads = <16 8 0>; - - -Example: - - clcd@10020000 { - compatible = "arm,pl111", "arm,primecell"; - reg = <0x10020000 0x1000>; - interrupt-names = "combined"; - interrupts = <0 44 4>; - clocks = <&oscclk1>, <&oscclk2>; - clock-names = "clcdclk", "apb_pclk"; - max-memory-bandwidth = <94371840>; /* Bps, 1024x768@60 16bpp */ - - port { - clcd_pads: endpoint { - remote-endpoint = <&clcd_panel>; - }; - }; - - }; - - panel { - compatible = "panel-dpi"; - - port { - clcd_panel: endpoint { - remote-endpoint = <&clcd_pads>; - }; - }; - - panel-timing { - clock-frequency = <25175000>; - hactive = <640>; - hback-porch = <40>; - hfront-porch = <24>; - hsync-len = <96>; - vactive = <480>; - vback-porch = <32>; - vfront-porch = <11>; - vsync-len = <2>; - }; - }; diff --git a/Documentation/devicetree/bindings/display/arm,pl11x.yaml b/Documentation/devicetree/bindings/display/arm,pl11x.yaml new file mode 100644 index 000000000000..b545c6d20325 --- /dev/null +++ b/Documentation/devicetree/bindings/display/arm,pl11x.yaml @@ -0,0 +1,183 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/arm,pl11x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Arm PrimeCell Color LCD Controller PL110/PL111 + +maintainers: + - Liviu Dudau <Liviu.Dudau@arm.com> + - Andre Przywara <andre.przywara@arm.com> + +description: + The Arm Primcell PL010/PL111 is an LCD controller IP, than scans out + a framebuffer region in system memory, and creates timed signals for + a variety of LCD panels. + +# We need a select here so we don't match all nodes with 'arm,primecell' +select: + properties: + compatible: + contains: + enum: + - arm,pl110 + - arm,pl111 + required: + - compatible + +properties: + compatible: + items: + - enum: + - arm,pl110 + - arm,pl111 + - const: arm,primecell + + reg: + maxItems: 1 + + interrupt-names: + oneOf: + - const: combined + description: + The IP provides four individual interrupt lines, but also one + combined line. If the integration only connects this line to the + interrupt controller, this single interrupt is noted here. + - items: + - const: mbe # CLCDMBEINTR + - const: vcomp # CLCDVCOMPINTR + - const: lnbu # CLCDLNBUINTR + - const: fuf # CLCDFUFINTR + + interrupts: + minItems: 1 + maxItems: 4 + + clock-names: + items: + - const: clcdclk + - const: apb_pclk + + clocks: + items: + - description: The CLCDCLK reference clock for the controller. + - description: The HCLK AHB slave clock for the register access. + + memory-region: + maxItems: 1 + description: + Phandle to a node describing memory to be used for the framebuffer. + If not present, the framebuffer may be located anywhere in memory. + + max-memory-bandwidth: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Maximum bandwidth in bytes per second that the cell's memory interface + can handle. + If not present, the memory interface is fast enough to handle all + possible video modes. + + port: + $ref: /schemas/graph.yaml#/$defs/port-base + additionalProperties: false + + description: + Output endpoint of the controller, connecting the LCD panel signals. + + properties: + endpoint: + $ref: /schemas/graph.yaml#/$defs/endpoint-base + unevaluatedProperties: false + + properties: + arm,pl11x,tft-r0g0b0-pads: + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - description: index of CLD pad used for first red bit (R0) + - description: index of CLD pad used for first green bit (G0) + - description: index of CLD pad used for first blue bit (G0) + deprecated: true + description: | + DEPRECATED. An array of three 32-bit values, defining the way + CLD[23:0] pads are wired up. + The first value contains the index of the "CLD" external pin (pad) + used as R0 (first bit of the red component), the second value for + green, the third value for blue. + See also "LCD panel signal multiplexing details" paragraphs in the + PL110/PL111 Technical Reference Manuals. + This implicitly defines available color modes, for example: + - PL111 TFT 4:4:4 panel: + arm,pl11x,tft-r0g0b0-pads = <4 15 20>; + - PL110 TFT (1:)5:5:5 panel: + arm,pl11x,tft-r0g0b0-pads = <1 7 13>; + - PL111 TFT (1:)5:5:5 panel: + arm,pl11x,tft-r0g0b0-pads = <3 11 19>; + - PL111 TFT 5:6:5 panel: + arm,pl11x,tft-r0g0b0-pads = <3 10 19>; + - PL110 and PL111 TFT 8:8:8 panel: + arm,pl11x,tft-r0g0b0-pads = <0 8 16>; + - PL110 and PL111 TFT 8:8:8 panel, R & B components swapped: + arm,pl11x,tft-r0g0b0-pads = <16 8 0>; + +additionalProperties: false + +required: + - compatible + - reg + - clock-names + - clocks + - port + +allOf: + - if: + properties: + interrupts: + minItems: 2 + required: + - interrupts + then: + required: + - interrupt-names + +examples: + - | + clcd@10020000 { + compatible = "arm,pl111", "arm,primecell"; + reg = <0x10020000 0x1000>; + interrupt-names = "combined"; + interrupts = <44>; + clocks = <&oscclk1>, <&oscclk2>; + clock-names = "clcdclk", "apb_pclk"; + max-memory-bandwidth = <94371840>; /* Bps, 1024x768@60 16bpp */ + + port { + clcd_pads: endpoint { + remote-endpoint = <&clcd_panel>; + }; + }; + }; + + panel { + compatible = "arm,rtsm-display", "panel-dpi"; + power-supply = <&vcc_supply>; + + port { + clcd_panel: endpoint { + remote-endpoint = <&clcd_pads>; + }; + }; + + panel-timing { + clock-frequency = <25175000>; + hactive = <640>; + hback-porch = <40>; + hfront-porch = <24>; + hsync-len = <96>; + vactive = <480>; + vback-porch = <32>; + vfront-porch = <11>; + vsync-len = <2>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/bridge/google,cros-ec-anx7688.yaml b/Documentation/devicetree/bindings/display/bridge/google,cros-ec-anx7688.yaml index a88a5d8c7ba5..a44d025d33bd 100644 --- a/Documentation/devicetree/bindings/display/bridge/google,cros-ec-anx7688.yaml +++ b/Documentation/devicetree/bindings/display/bridge/google,cros-ec-anx7688.yaml @@ -78,4 +78,3 @@ examples: }; }; }; - diff --git a/Documentation/devicetree/bindings/display/bridge/ps8640.yaml b/Documentation/devicetree/bindings/display/bridge/ps8640.yaml index 186e17be51fb..8ab156e0a8cf 100644 --- a/Documentation/devicetree/bindings/display/bridge/ps8640.yaml +++ b/Documentation/devicetree/bindings/display/bridge/ps8640.yaml @@ -119,4 +119,3 @@ examples: }; }; }; - diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml index 3bd670b8e5cd..0b6f5bef120f 100644 --- a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml +++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml @@ -58,6 +58,7 @@ properties: properties: data-lines: + $ref: /schemas/types.yaml#/definitions/uint32 enum: [ 16, 18, 24 ] port@1: diff --git a/Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml b/Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml index 0091df9dd73b..989ab312c1f4 100644 --- a/Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml +++ b/Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml @@ -105,4 +105,3 @@ examples: }; }; }; - diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml index d635c5dcb68b..69ba75777dac 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml @@ -102,4 +102,3 @@ examples: clock-names = "merge"; }; }; - diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9341.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9341.yaml index 20ce88ab4b3a..6058948a9764 100644 --- a/Documentation/devicetree/bindings/display/panel/ilitek,ili9341.yaml +++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9341.yaml @@ -75,4 +75,3 @@ examples: }; }; ... - diff --git a/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.yaml b/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.yaml index 17cbd0ad32bf..ad7d3575190e 100644 --- a/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.yaml +++ b/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.yaml @@ -50,4 +50,3 @@ examples: }; }; ... - diff --git a/Documentation/devicetree/bindings/display/panel/panel-timing.yaml b/Documentation/devicetree/bindings/display/panel/panel-timing.yaml index 7749de95ee40..229e3b36ee29 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-timing.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-timing.yaml @@ -146,6 +146,7 @@ properties: Horizontal sync pulse. 0 selects active low, 1 selects active high. If omitted then it is not used by the hardware + $ref: /schemas/types.yaml#/definitions/uint32 enum: [0, 1] vsync-active: @@ -153,6 +154,7 @@ properties: Vertical sync pulse. 0 selects active low, 1 selects active high. If omitted then it is not used by the hardware + $ref: /schemas/types.yaml#/definitions/uint32 enum: [0, 1] de-active: @@ -160,6 +162,7 @@ properties: Data enable. 0 selects active low, 1 selects active high. If omitted then it is not used by the hardware + $ref: /schemas/types.yaml#/definitions/uint32 enum: [0, 1] pixelclk-active: @@ -169,6 +172,7 @@ properties: sample data on rising edge. Use 1 to drive pixel data on rising edge and sample data on falling edge + $ref: /schemas/types.yaml#/definitions/uint32 enum: [0, 1] syncclk-active: @@ -179,6 +183,7 @@ properties: sample sync on rising edge of pixel clock. Use 1 to drive sync on rising edge and sample sync on falling edge of pixel clock + $ref: /schemas/types.yaml#/definitions/uint32 enum: [0, 1] interlaced: diff --git a/Documentation/devicetree/bindings/display/panel/raydium,rm67191.yaml b/Documentation/devicetree/bindings/display/panel/raydium,rm67191.yaml index 745dd247c409..617aa8c8c03a 100644 --- a/Documentation/devicetree/bindings/display/panel/raydium,rm67191.yaml +++ b/Documentation/devicetree/bindings/display/panel/raydium,rm67191.yaml @@ -24,6 +24,7 @@ properties: dsi-lanes: description: Number of DSI lanes to be used must be <3> or <4> + $ref: /schemas/types.yaml#/definitions/uint32 enum: [3, 4] v3p3-supply: diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml index ca959451557e..1cdc91b3439f 100644 --- a/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml +++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml @@ -36,6 +36,7 @@ properties: init-delay: description: delay after initialization sequence [ms] + $ref: /schemas/types.yaml#/definitions/uint32 panel-width-mm: description: physical panel width [mm] diff --git a/Documentation/devicetree/bindings/display/sprd/sprd,display-subsystem.yaml b/Documentation/devicetree/bindings/display/sprd/sprd,display-subsystem.yaml index d0a5592bd89d..b3d5e1b96fae 100644 --- a/Documentation/devicetree/bindings/display/sprd/sprd,display-subsystem.yaml +++ b/Documentation/devicetree/bindings/display/sprd/sprd,display-subsystem.yaml @@ -63,4 +63,3 @@ examples: compatible = "sprd,display-subsystem"; ports = <&dpu_out>; }; - diff --git a/Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml b/Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml index 01e2da23790b..d6ea4d62a2cf 100644 --- a/Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml +++ b/Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml @@ -75,4 +75,3 @@ examples: }; ... - |