2 files changed, 7 insertions, 4 deletions
diff --git a/Documentation/devicetree/bindings/eeprom/at24.yaml b/Documentation/devicetree/bindings/eeprom/at24.yaml
index e8778560d966..0f6d8db18d6c 100644
--- a/Documentation/devicetree/bindings/eeprom/at24.yaml
+++ b/Documentation/devicetree/bindings/eeprom/at24.yaml
@@ -145,10 +145,7 @@ properties:
       over reads to the next slave address. Please consult the manual of
       your device.
 
-  wp-gpios:
-    description:
-      GPIO to which the write-protect pin of the chip is connected.
-    maxItems: 1
+  wp-gpios: true
 
   address-width:
     allOf:
@@ -167,6 +164,10 @@ properties:
     minimum: 1
     maximum: 8
 
+  vcc-supply:
+    description:
+      phandle of the regulator that provides the supply voltage.
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/eeprom/at25.txt b/Documentation/devicetree/bindings/eeprom/at25.txt
index 42577dd113dd..fcacd97abd0a 100644
--- a/Documentation/devicetree/bindings/eeprom/at25.txt
+++ b/Documentation/devicetree/bindings/eeprom/at25.txt
@@ -20,6 +20,7 @@ Optional properties:
 - spi-cpha : SPI shifted clock phase, as per spi-bus bindings.
 - spi-cpol : SPI inverse clock polarity, as per spi-bus bindings.
 - read-only : this parameter-less property disables writes to the eeprom
+- wp-gpios : GPIO to which the write-protect pin of the chip is connected
 
 Obsolete legacy properties can be used in place of "size", "pagesize",
 "address-width", and "read-only":
@@ -36,6 +37,7 @@ Example:
 		spi-max-frequency = <5000000>;
 		spi-cpha;
 		spi-cpol;
+		wp-gpios = <&gpio1 3 0>;
 
 		pagesize = <64>;
 		size = <32768>;