diff options
Diffstat (limited to 'Documentation/devicetree/bindings/mfd')
34 files changed, 3209 insertions, 1226 deletions
diff --git a/Documentation/devicetree/bindings/mfd/ab8500.txt b/Documentation/devicetree/bindings/mfd/ab8500.txt deleted file mode 100644 index 937b3e5505e0..000000000000 --- a/Documentation/devicetree/bindings/mfd/ab8500.txt +++ /dev/null @@ -1,282 +0,0 @@ -* AB8500 Multi-Functional Device (MFD) - -Required parent device properties: -- compatible : contains "stericsson,ab8500" or "stericsson,ab8505"; -- interrupts : contains the IRQ line for the AB8500 -- interrupt-controller : describes the AB8500 as an Interrupt Controller (has its own domain) -- #interrupt-cells : should be 2, for 2-cell format - - The first cell is the AB8500 local IRQ number - - The second cell is used to specify optional parameters - - bits[3:0] trigger type and level flags: - 1 = low-to-high edge triggered - 2 = high-to-low edge triggered - 4 = active high level-sensitive - 8 = active low level-sensitive - -The AB8500 consists of a large and varied group of sub-devices: - -Device IRQ Names Supply Names Description ------- --------- ------------ ----------- -ab8500-bm : : : Battery Manager -ab8500-btemp : : : Battery Temperature -ab8500-charger : : : Battery Charger -ab8500-codec : : : Audio Codec -ab8500-fg : : vddadc : Fuel Gauge - : NCONV_ACCU : : Accumulate N Sample Conversion - : BATT_OVV : : Battery Over Voltage - : LOW_BAT_F : : LOW threshold battery voltage - : CC_INT_CALIB : : Coulomb Counter Internal Calibration - : CCEOC : : Coulomb Counter End of Conversion -ab8500-btemp : : vtvout : Battery Temperature - : BAT_CTRL_INDB : : Battery Removal Indicator - : BTEMP_LOW : : Btemp < BtempLow, if battery temperature is lower than -10°C - : BTEMP_LOW_MEDIUM : : BtempLow < Btemp < BtempMedium,if battery temperature is between -10 and 0°C - : BTEMP_MEDIUM_HIGH : : BtempMedium < Btemp < BtempHigh,if battery temperature is between 0°C and MaxTemp - : BTEMP_HIGH : : Btemp > BtempHigh, if battery temperature is higher than MaxTemp -ab8500-charger : : vddadc : Charger interface - : MAIN_CH_UNPLUG_DET : : main charger unplug detection management (not in 8505) - : MAIN_CHARGE_PLUG_DET : : main charger plug detection management (not in 8505) - : MAIN_EXT_CH_NOT_OK : : main charger not OK - : MAIN_CH_TH_PROT_R : : Die temp is above main charger - : MAIN_CH_TH_PROT_F : : Die temp is below main charger - : VBUS_DET_F : : VBUS falling detected - : VBUS_DET_R : : VBUS rising detected - : USB_LINK_STATUS : : USB link status has changed - : USB_CH_TH_PROT_R : : Die temp is above usb charger - : USB_CH_TH_PROT_F : : Die temp is below usb charger - : USB_CHARGER_NOT_OKR : : allowed USB charger not ok detection - : VBUS_OVV : : Overvoltage on Vbus ball detected (USB charge is stopped) - : CH_WD_EXP : : Charger watchdog detected -ab8500-gpadc : HW_CONV_END : vddadc : Analogue to Digital Converter - SW_CONV_END : : -ab8500-gpio : : : GPIO Controller (AB8500) -ab8505-gpio : : : GPIO Controller (AB8505) -ab8500-ponkey : ONKEY_DBF : : Power-on Key - ONKEY_DBR : : -ab8500-pwm : : : Pulse Width Modulator -ab8500-regulator : : : Regulators (AB8500) -ab8505-regulator : : : Regulators (AB8505) -ab8500-rtc : 60S : : Real Time Clock - : ALARM : : -ab8500-sysctrl : : : System Control -ab8500-usb : ID_WAKEUP_R : vddulpivio18 : Universal Serial Bus - : ID_WAKEUP_F : v-ape : - : VBUS_DET_F : musb_1v8 : - : VBUS_DET_R : : - : USB_LINK_STATUS : : - : USB_ADP_PROBE_PLUG : : - : USB_ADP_PROBE_UNPLUG : : - -Required child device properties: -- compatible : "stericsson,ab8500-[bm|btemp|charger|fg|gpadc|gpio|ponkey| - pwm|regulator|rtc|sysctrl|usb]"; - - A few child devices require ADC channels from the GPADC node. Those follow the - standard bindings from - https://github.com/devicetree-org/dt-schema/blob/master/schemas/iio/iio-consumer.yaml - and Documentation/devicetree/bindings/iio/adc/adc.yaml - - abx500-temp : io-channels "aux1" and "aux2" for measuring external - temperatures. - ab8500-fg : io-channel "main_bat_v" for measuring main battery voltage, - ab8500-btemp : io-channels "btemp_ball" and "bat_ctrl" for measuring the - battery voltage. - ab8500-charger : io-channels "main_charger_v", "main_charger_c", "vbus_v", - "usb_charger_c" for measuring voltage and current of the - different charging supplies. - -Optional child device properties: -- interrupts : contains the device IRQ(s) using the 2-cell format (see above) -- interrupt-names : contains names of IRQ resource in the order in which they were - supplied in the interrupts property -- <supply_name>-supply : contains a phandle to the regulator supply node in Device Tree - -Non-standard child device properties: - - Audio CODEC: - - stericsson,amic[1|2]-type-single-ended : Single-ended Analoge Mic (default: differential) - - stericsson,amic1a-bias-vamic2 : Analoge Mic wishes to use a non-standard Vamic - - stericsson,amic1b-bias-vamic2 : Analoge Mic wishes to use a non-standard Vamic - - stericsson,amic2-bias-vamic1 : Analoge Mic wishes to use a non-standard Vamic - - stericsson,earpeice-cmv : Earpeice voltage (only: 950 | 1100 | 1270 | 1580) - -ab8500 { - compatible = "stericsson,ab8500"; - interrupts = <0 40 0x4>; - interrupt-controller; - #interrupt-cells = <2>; - - ab8500-rtc { - compatible = "stericsson,ab8500-rtc"; - interrupts = <17 0x4 - 18 0x4>; - interrupt-names = "60S", "ALARM"; - }; - - ab8500-gpadc { - compatible = "stericsson,ab8500-gpadc"; - interrupts = <32 0x4 - 39 0x4>; - interrupt-names = "HW_CONV_END", "SW_CONV_END"; - vddadc-supply = <&ab8500_ldo_tvout_reg>; - #address-cells = <1>; - #size-cells = <0>; - #io-channel-cells = <1>; - - /* GPADC channels */ - bat_ctrl: channel@1 { - reg = <0x01>; - }; - btemp_ball: channel@2 { - reg = <0x02>; - }; - main_charger_v: channel@3 { - reg = <0x03>; - }; - acc_detect1: channel@4 { - reg = <0x04>; - }; - acc_detect2: channel@5 { - reg = <0x05>; - }; - adc_aux1: channel@6 { - reg = <0x06>; - }; - adc_aux2: channel@7 { - reg = <0x07>; - }; - main_batt_v: channel@8 { - reg = <0x08>; - }; - vbus_v: channel@9 { - reg = <0x09>; - }; - main_charger_c: channel@a { - reg = <0x0a>; - }; - usb_charger_c: channel@b { - reg = <0x0b>; - }; - bk_bat_v: channel@c { - reg = <0x0c>; - }; - die_temp: channel@d { - reg = <0x0d>; - }; - usb_id: channel@e { - reg = <0x0e>; - }; - xtal_temp: channel@12 { - reg = <0x12>; - }; - vbat_true_meas: channel@13 { - reg = <0x13>; - }; - bat_ctrl_and_ibat: channel@1c { - reg = <0x1c>; - }; - vbat_meas_and_ibat: channel@1d { - reg = <0x1d>; - }; - vbat_true_meas_and_ibat: channel@1e { - reg = <0x1e>; - }; - bat_temp_and_ibat: channel@1f { - reg = <0x1f>; - }; - }; - - ab8500_temp { - compatible = "stericsson,abx500-temp"; - io-channels = <&gpadc 0x06>, - <&gpadc 0x07>; - io-channel-name = "aux1", "aux2"; - }; - - ab8500_battery: ab8500_battery { - stericsson,battery-type = "LIPO"; - thermistor-on-batctrl; - }; - - ab8500_fg { - compatible = "stericsson,ab8500-fg"; - battery = <&ab8500_battery>; - io-channels = <&gpadc 0x08>; - io-channel-name = "main_bat_v"; - }; - - ab8500_btemp { - compatible = "stericsson,ab8500-btemp"; - battery = <&ab8500_battery>; - io-channels = <&gpadc 0x02>, - <&gpadc 0x01>; - io-channel-name = "btemp_ball", - "bat_ctrl"; - }; - - ab8500_charger { - compatible = "stericsson,ab8500-charger"; - battery = <&ab8500_battery>; - vddadc-supply = <&ab8500_ldo_tvout_reg>; - io-channels = <&gpadc 0x03>, - <&gpadc 0x0a>, - <&gpadc 0x09>, - <&gpadc 0x0b>; - io-channel-name = "main_charger_v", - "main_charger_c", - "vbus_v", - "usb_charger_c"; - }; - - ab8500-usb { - compatible = "stericsson,ab8500-usb"; - interrupts = < 90 0x4 - 96 0x4 - 14 0x4 - 15 0x4 - 79 0x4 - 74 0x4 - 75 0x4>; - interrupt-names = "ID_WAKEUP_R", - "ID_WAKEUP_F", - "VBUS_DET_F", - "VBUS_DET_R", - "USB_LINK_STATUS", - "USB_ADP_PROBE_PLUG", - "USB_ADP_PROBE_UNPLUG"; - vddulpivio18-supply = <&ab8500_ldo_intcore_reg>; - v-ape-supply = <&db8500_vape_reg>; - musb_1v8-supply = <&db8500_vsmps2_reg>; - }; - - ab8500-ponkey { - compatible = "stericsson,ab8500-ponkey"; - interrupts = <6 0x4 - 7 0x4>; - interrupt-names = "ONKEY_DBF", "ONKEY_DBR"; - }; - - ab8500-sysctrl { - compatible = "stericsson,ab8500-sysctrl"; - }; - - ab8500-pwm { - compatible = "stericsson,ab8500-pwm"; - }; - - codec: ab8500-codec { - compatible = "stericsson,ab8500-codec"; - - stericsson,earpeice-cmv = <950>; /* Units in mV. */ - }; - - ab8500-regulators { - compatible = "stericsson,ab8500-regulator"; - - ab8500_ldo_aux1_reg: ab8500_ldo_aux1 { - /* - * See: Documentation/devicetree/bindings/regulator/regulator.txt - * for more information on regulators - */ - }; - }; -}; diff --git a/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt b/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt index 692300117c64..9d837535637b 100644 --- a/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt +++ b/Documentation/devicetree/bindings/mfd/atmel-flexcom.txt @@ -54,7 +54,7 @@ flexcom@f8034000 { clock-names = "spi_clk"; atmel,fifo-size = <32>; - mtd_dataflash@0 { + flash@0 { compatible = "atmel,at25f512b"; reg = <0>; spi-max-frequency = <20000000>; diff --git a/Documentation/devicetree/bindings/mfd/da9063.txt b/Documentation/devicetree/bindings/mfd/da9063.txt index 91b79a21d403..aa8b800cc4ad 100644 --- a/Documentation/devicetree/bindings/mfd/da9063.txt +++ b/Documentation/devicetree/bindings/mfd/da9063.txt @@ -64,10 +64,13 @@ Sub-nodes: and KEY_SLEEP. - watchdog : This node defines settings for the Watchdog timer associated - with the DA9063 and DA9063L. There are currently no entries in this - binding, however compatible = "dlg,da9063-watchdog" should be added - if a node is created. + with the DA9063 and DA9063L. The node should contain the compatible property + with the value "dlg,da9063-watchdog". + Optional watchdog properties: + - dlg,use-sw-pm: Add this property to disable the watchdog during suspend. + Only use this option if you can't use the watchdog automatic suspend + function during a suspend (see register CONTROL_B). Example: diff --git a/Documentation/devicetree/bindings/mfd/delta,tn48m-cpld.yaml b/Documentation/devicetree/bindings/mfd/delta,tn48m-cpld.yaml new file mode 100644 index 000000000000..f6967c1f6235 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/delta,tn48m-cpld.yaml @@ -0,0 +1,90 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/delta,tn48m-cpld.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Delta Networks TN48M CPLD controller + +maintainers: + - Robert Marko <robert.marko@sartura.hr> + +description: | + Lattice CPLD onboard the TN48M switches is used for system + management. + + It provides information about the hardware model, revision, + PSU status etc. + + It is also being used as a GPIO expander and reset controller + for the switch MAC-s and other peripherals. + +properties: + compatible: + const: delta,tn48m-cpld + + reg: + description: + I2C device address. + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + +patternProperties: + "^gpio(@[0-9a-f]+)?$": + $ref: ../gpio/delta,tn48m-gpio.yaml + + "^reset-controller?$": + $ref: ../reset/delta,tn48m-reset.yaml + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + cpld@41 { + compatible = "delta,tn48m-cpld"; + reg = <0x41>; + #address-cells = <1>; + #size-cells = <0>; + + gpio@31 { + compatible = "delta,tn48m-gpo"; + reg = <0x31>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio@3a { + compatible = "delta,tn48m-gpi"; + reg = <0x3a>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio@40 { + compatible = "delta,tn48m-gpi"; + reg = <0x40>; + gpio-controller; + #gpio-cells = <2>; + }; + + reset-controller { + compatible = "delta,tn48m-reset"; + #reset-cells = <1>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml b/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml index d1f53bd449f7..e25caf8ef9f4 100644 --- a/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml +++ b/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml @@ -31,25 +31,21 @@ properties: controller-data: description: - SPI controller data, see bindings/spi/spi-samsung.txt + SPI controller data, see bindings/spi/samsung,spi-peripheral-props.yaml type: object google,cros-ec-spi-pre-delay: description: This property specifies the delay in usecs between the assertion of the CS and the first clock pulse. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - default: 0 - - minimum: 0 + $ref: /schemas/types.yaml#/definitions/uint32 + default: 0 google,cros-ec-spi-msg-delay: description: This property specifies the delay in usecs between messages. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - default: 0 - - minimum: 0 + $ref: /schemas/types.yaml#/definitions/uint32 + default: 0 google,has-vbc-nvram: description: @@ -61,7 +57,7 @@ properties: mediatek,rpmsg-name: description: Must be defined if the cros-ec is a rpmsg device for a Mediatek - ARM Cortex M4 Co-processor. Contains the name pf the rpmsg + ARM Cortex M4 Co-processor. Contains the name of the rpmsg device. Used to match the subnode to the rpmsg device announced by the SCP. $ref: "/schemas/types.yaml#/definitions/string" @@ -89,6 +85,10 @@ properties: ec-pwm: $ref: "/schemas/pwm/google,cros-ec-pwm.yaml#" + deprecated: true + + pwm: + $ref: "/schemas/pwm/google,cros-ec-pwm.yaml#" keyboard-controller: $ref: "/schemas/input/google,cros-ec-keyb.yaml#" @@ -148,18 +148,21 @@ patternProperties: required: - compatible -if: - properties: - compatible: - contains: - enum: - - google,cros-ec-i2c - - google,cros-ec-rpmsg -then: - properties: - google,cros-ec-spi-pre-delay: false - google,cros-ec-spi-msg-delay: false - spi-max-frequency: false +allOf: + - if: + properties: + compatible: + contains: + enum: + - google,cros-ec-i2c + - google,cros-ec-rpmsg + then: + properties: + google,cros-ec-spi-pre-delay: false + google,cros-ec-spi-msg-delay: false + spi-max-frequency: false + else: + $ref: /schemas/spi/spi-peripheral-props.yaml additionalProperties: false @@ -200,7 +203,7 @@ examples: spi-max-frequency = <5000000>; proximity { - compatible = "google,cros-ec-mkbp-proximity"; + compatible = "google,cros-ec-mkbp-proximity"; }; cbas { diff --git a/Documentation/devicetree/bindings/mfd/max14577.txt b/Documentation/devicetree/bindings/mfd/max14577.txt deleted file mode 100644 index be11943a0560..000000000000 --- a/Documentation/devicetree/bindings/mfd/max14577.txt +++ /dev/null @@ -1,147 +0,0 @@ -Maxim MAX14577/77836 Multi-Function Device - -MAX14577 is a Multi-Function Device with Micro-USB Interface Circuit, Li+ -Battery Charger and SFOUT LDO output for powering USB devices. It is -interfaced to host controller using I2C. - -MAX77836 additionally contains PMIC (with two LDO regulators) and Fuel Gauge. -For the description of Fuel Gauge low SOC alert interrupt see: -../power/supply/max17040_battery.txt - - -Required properties: -- compatible : Must be "maxim,max14577" or "maxim,max77836". -- reg : I2C slave address for the max14577 chip (0x25 for max14577/max77836) -- interrupts : IRQ line for the chip. - - -Required nodes: - - charger : - Node for configuring the charger driver. - Required properties: - - compatible : "maxim,max14577-charger" - or "maxim,max77836-charger" - - maxim,fast-charge-uamp : Current in uA for Fast Charge; - Valid values: - - for max14577: 90000 - 950000; - - for max77836: 45000 - 475000; - - maxim,eoc-uamp : Current in uA for End-Of-Charge mode; - Valid values: - - for max14577: 50000 - 200000; - - for max77836: 5000 - 100000; - - maxim,ovp-uvolt : OverVoltage Protection Threshold in uV; - In an overvoltage condition, INT asserts and charging - stops. Valid values: - - 6000000, 6500000, 7000000, 7500000; - - maxim,constant-uvolt : Battery Constant Voltage in uV; - Valid values: - - 4000000 - 4280000 (step by 20000); - - 4350000; - - -Optional nodes: -- max14577-muic/max77836-muic : - Node used only by extcon consumers. - Required properties: - - compatible : "maxim,max14577-muic" or "maxim,max77836-muic" - -- regulators : - Required properties: - - compatible : "maxim,max14577-regulator" - or "maxim,max77836-regulator" - - May contain a sub-node per regulator from the list below. Each - sub-node should contain the constraints and initialization information - for that regulator. See regulator.txt for a description of standard - properties for these sub-nodes. - - List of valid regulator names: - - for max14577: CHARGER, SAFEOUT. - - for max77836: CHARGER, SAFEOUT, LDO1, LDO2. - - The SAFEOUT is a fixed voltage regulator so there is no need to specify - voltages for it. - - -Example: - -#include <dt-bindings/interrupt-controller/irq.h> - -max14577@25 { - compatible = "maxim,max14577"; - reg = <0x25>; - interrupt-parent = <&gpx1>; - interrupts = <5 IRQ_TYPE_LEVEL_LOW>; - - muic: max14577-muic { - compatible = "maxim,max14577-muic"; - }; - - regulators { - compatible = "maxim,max14577-regulator"; - - SAFEOUT { - regulator-name = "SAFEOUT"; - }; - CHARGER { - regulator-name = "CHARGER"; - regulator-min-microamp = <90000>; - regulator-max-microamp = <950000>; - regulator-boot-on; - }; - }; - - charger { - compatible = "maxim,max14577-charger"; - - maxim,constant-uvolt = <4350000>; - maxim,fast-charge-uamp = <450000>; - maxim,eoc-uamp = <50000>; - maxim,ovp-uvolt = <6500000>; - }; -}; - - -max77836@25 { - compatible = "maxim,max77836"; - reg = <0x25>; - interrupt-parent = <&gpx1>; - interrupts = <5 IRQ_TYPE_LEVEL_LOW>; - - muic: max77836-muic { - compatible = "maxim,max77836-muic"; - }; - - regulators { - compatible = "maxim,max77836-regulator"; - - SAFEOUT { - regulator-name = "SAFEOUT"; - }; - CHARGER { - regulator-name = "CHARGER"; - regulator-min-microamp = <90000>; - regulator-max-microamp = <950000>; - regulator-boot-on; - }; - LDO1 { - regulator-name = "LDO1"; - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; - LDO2 { - regulator-name = "LDO2"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <3950000>; - }; - }; - - charger { - compatible = "maxim,max77836-charger"; - - maxim,constant-uvolt = <4350000>; - maxim,fast-charge-uamp = <225000>; - maxim,eoc-uamp = <7500>; - maxim,ovp-uvolt = <6500000>; - }; -}; diff --git a/Documentation/devicetree/bindings/mfd/max77693.txt b/Documentation/devicetree/bindings/mfd/max77693.txt deleted file mode 100644 index 1032df14498b..000000000000 --- a/Documentation/devicetree/bindings/mfd/max77693.txt +++ /dev/null @@ -1,194 +0,0 @@ -Maxim MAX77693 multi-function device - -MAX77693 is a Multifunction device with the following submodules: -- PMIC, -- CHARGER, -- LED, -- MUIC, -- HAPTIC - -It is interfaced to host controller using i2c. -This document describes the bindings for the mfd device. - -Required properties: -- compatible : Must be "maxim,max77693". -- reg : Specifies the i2c slave address of PMIC block. -- interrupts : This i2c device has an IRQ line connected to the main SoC. - -Optional properties: -- regulators : The regulators of max77693 have to be instantiated under subnode - named "regulators" using the following format. - - regulators { - regulator-compatible = ESAFEOUT1/ESAFEOUT2/CHARGER - standard regulator constraints[*]. - }; - - [*] refer Documentation/devicetree/bindings/regulator/regulator.txt - -- haptic : The MAX77693 haptic device utilises a PWM controlled motor to provide - users with tactile feedback. PWM period and duty-cycle are varied in - order to provide the appropriate level of feedback. - - Required properties: - - compatible : Must be "maxim,max77693-haptic" - - haptic-supply : power supply for the haptic motor - [*] refer Documentation/devicetree/bindings/regulator/regulator.txt - - pwms : phandle to the physical PWM(Pulse Width Modulation) device. - PWM properties should be named "pwms". And number of cell is different - for each pwm device. - To get more information, please refer to documentation. - [*] refer Documentation/devicetree/bindings/pwm/pwm.txt - -- charger : Node configuring the charger driver. - If present, required properties: - - compatible : Must be "maxim,max77693-charger". - - Optional properties (if not set, defaults will be used): - - maxim,constant-microvolt : Battery constant voltage in uV. The charger - will operate in fast charge constant current mode till battery voltage - reaches this level. Then the charger will switch to fast charge constant - voltage mode. Also vsys (system voltage) will be set to this value when - DC power is supplied but charger is not enabled. - Valid values: 3650000 - 4400000, step by 25000 (rounded down) - Default: 4200000 - - - maxim,min-system-microvolt : Minimal system voltage in uV. - Valid values: 3000000 - 3700000, step by 100000 (rounded down) - Default: 3600000 - - - maxim,thermal-regulation-celsius : Temperature in Celsius for entering - high temperature charging mode. If die temperature exceeds this value - the charging current will be reduced by 105 mA/Celsius. - Valid values: 70, 85, 100, 115 - Default: 100 - - - maxim,battery-overcurrent-microamp : Overcurrent protection threshold - in uA (current from battery to system). - Valid values: 2000000 - 3500000, step by 250000 (rounded down) - Default: 3500000 - - - maxim,charge-input-threshold-microvolt : Threshold voltage in uV for - triggering input voltage regulation loop. If input voltage decreases - below this value, the input current will be reduced to reach the - threshold voltage. - Valid values: 4300000, 4700000, 4800000, 4900000 - Default: 4300000 - -- led : the LED submodule device node - -There are two LED outputs available - FLED1 and FLED2. Each of them can -control a separate LED or they can be connected together to double -the maximum current for a single connected LED. One LED is represented -by one child node. - -Required properties: -- compatible : Must be "maxim,max77693-led". - -Optional properties: -- maxim,boost-mode : - In boost mode the device can produce up to 1.2A of total current - on both outputs. The maximum current on each output is reduced - to 625mA then. If not enabled explicitly, boost setting defaults to - LEDS_BOOST_FIXED in case both current sources are used. - Possible values: - LEDS_BOOST_OFF (0) - no boost, - LEDS_BOOST_ADAPTIVE (1) - adaptive mode, - LEDS_BOOST_FIXED (2) - fixed mode. -- maxim,boost-mvout : Output voltage of the boost module in millivolts. - Valid values: 3300 - 5500, step by 25 (rounded down) - Default: 3300 -- maxim,mvsys-min : Low input voltage level in millivolts. Flash is not fired - if chip estimates that system voltage could drop below this level due - to flash power consumption. - Valid values: 2400 - 3400, step by 33 (rounded down) - Default: 2400 - -Required properties for the LED child node: -- led-sources : see Documentation/devicetree/bindings/leds/common.txt; - device current output identifiers: 0 - FLED1, 1 - FLED2 -- led-max-microamp : see Documentation/devicetree/bindings/leds/common.txt - Valid values for a LED connected to one FLED output: - 15625 - 250000, step by 15625 (rounded down) - Valid values for a LED connected to both FLED outputs: - 15625 - 500000, step by 15625 (rounded down) -- flash-max-microamp : see Documentation/devicetree/bindings/leds/common.txt - Valid values for a single LED connected to one FLED output - (boost mode must be turned off): - 15625 - 1000000, step by 15625 (rounded down) - Valid values for a single LED connected to both FLED outputs: - 15625 - 1250000, step by 15625 (rounded down) - Valid values for two LEDs case: - 15625 - 625000, step by 15625 (rounded down) -- flash-max-timeout-us : see Documentation/devicetree/bindings/leds/common.txt - Valid values: 62500 - 1000000, step by 62500 (rounded down) - -Optional properties for the LED child node: -- label : see Documentation/devicetree/bindings/leds/common.txt - -Optional nodes: -- max77693-muic : - Node used only by extcon consumers. - Required properties: - - compatible : "maxim,max77693-muic" - -Example: -#include <dt-bindings/leds/common.h> - - max77693@66 { - compatible = "maxim,max77693"; - reg = <0x66>; - interrupt-parent = <&gpx1>; - interrupts = <5 IRQ_TYPE_LEVEL_LOW>; - - regulators { - esafeout@1 { - regulator-compatible = "ESAFEOUT1"; - regulator-name = "ESAFEOUT1"; - regulator-boot-on; - }; - esafeout@2 { - regulator-compatible = "ESAFEOUT2"; - regulator-name = "ESAFEOUT2"; - }; - charger@0 { - regulator-compatible = "CHARGER"; - regulator-name = "CHARGER"; - regulator-min-microamp = <60000>; - regulator-max-microamp = <2580000>; - regulator-boot-on; - }; - }; - - haptic { - compatible = "maxim,max77693-haptic"; - haptic-supply = <&haptic_supply>; - pwms = <&pwm 0 40000 0>; - pwm-names = "haptic"; - }; - - charger { - compatible = "maxim,max77693-charger"; - - maxim,constant-microvolt = <4200000>; - maxim,min-system-microvolt = <3600000>; - maxim,thermal-regulation-celsius = <75>; - maxim,battery-overcurrent-microamp = <3000000>; - maxim,charge-input-threshold-microvolt = <4300000>; - }; - - led { - compatible = "maxim,max77693-led"; - maxim,boost-mode = <LEDS_BOOST_FIXED>; - maxim,boost-mvout = <5000>; - maxim,mvsys-min = <2400>; - - camera_flash: flash-led { - label = "max77693-flash"; - led-sources = <0>, <1>; - led-max-microamp = <500000>; - flash-max-microamp = <1250000>; - flash-max-timeout-us = <1000000>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/mfd/max77802.txt b/Documentation/devicetree/bindings/mfd/max77802.txt deleted file mode 100644 index 09decac20d91..000000000000 --- a/Documentation/devicetree/bindings/mfd/max77802.txt +++ /dev/null @@ -1,25 +0,0 @@ -Maxim MAX77802 multi-function device - -The Maxim MAX77802 is a Power Management IC (PMIC) that contains 10 high -efficiency Buck regulators, 32 Low-DropOut (LDO) regulators used to power -up application processors and peripherals, a 2-channel 32kHz clock outputs, -a Real-Time-Clock (RTC) and a I2C interface to program the individual -regulators, clocks outputs and the RTC. - -Bindings for the built-in 32k clock generator block and -regulators are defined in ../clk/maxim,max77802.txt and -../regulator/max77802.txt respectively. - -Required properties: -- compatible : Must be "maxim,max77802" -- reg : Specifies the I2C slave address of PMIC block. -- interrupts : I2C device IRQ line connected to the main SoC. - -Example: - - max77802: pmic@9 { - compatible = "maxim,max77802"; - interrupt-parent = <&intc>; - interrupts = <26 IRQ_TYPE_NONE>; - reg = <0x09>; - }; diff --git a/Documentation/devicetree/bindings/mfd/maxim,max14577.yaml b/Documentation/devicetree/bindings/mfd/maxim,max14577.yaml new file mode 100644 index 000000000000..52edd1bf549f --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/maxim,max14577.yaml @@ -0,0 +1,195 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/maxim,max14577.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim MAX14577/MAX77836 MicroUSB and Companion Power Management IC + +maintainers: + - Krzysztof Kozlowski <krzk@kernel.org> + +description: | + This is a part of device tree bindings for Maxim MAX14577/MAX77836 MicroUSB + Integrated Circuit (MUIC). + + The Maxim MAX14577 is a MicroUSB and Companion Power Management IC which + includes voltage safeout regulators, charger and MicroUSB management IC. + + The Maxim MAX77836 is a MicroUSB and Companion Power Management IC which + includes voltage safeout and LDO regulators, charger, fuel-gauge and MicroUSB + management IC. + +properties: + compatible: + enum: + - maxim,max14577 + - maxim,max77836 + + interrupts: + maxItems: 1 + + reg: + maxItems: 1 + + wakeup-source: true + + charger: + $ref: /schemas/power/supply/maxim,max14577.yaml + + extcon: + type: object + properties: + compatible: + enum: + - maxim,max14577-muic + - maxim,max77836-muic + + required: + - compatible + + regulators: + $ref: /schemas/regulator/maxim,max14577.yaml + +required: + - compatible + - interrupts + - reg + - charger + +allOf: + - if: + properties: + compatible: + contains: + const: maxim,max14577 + then: + properties: + charger: + properties: + compatible: + const: maxim,max14577-charger + extcon: + properties: + compatible: + const: maxim,max14577-muic + regulator: + properties: + compatible: + const: maxim,max14577-regulator + else: + properties: + charger: + properties: + compatible: + const: maxim,max77836-charger + extcon: + properties: + compatible: + const: maxim,max77836-muic + regulator: + properties: + compatible: + const: maxim,max77836-regulator + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@25 { + compatible = "maxim,max14577"; + reg = <0x25>; + interrupt-parent = <&gpx1>; + interrupts = <5 IRQ_TYPE_LEVEL_LOW>; + + extcon { + compatible = "maxim,max14577-muic"; + }; + + regulators { + compatible = "maxim,max14577-regulator"; + + SAFEOUT { + regulator-name = "SAFEOUT"; + }; + + CHARGER { + regulator-name = "CHARGER"; + regulator-min-microamp = <90000>; + regulator-max-microamp = <950000>; + regulator-boot-on; + }; + }; + + charger { + compatible = "maxim,max14577-charger"; + + maxim,constant-uvolt = <4350000>; + maxim,fast-charge-uamp = <450000>; + maxim,eoc-uamp = <50000>; + maxim,ovp-uvolt = <6500000>; + }; + }; + }; + + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@25 { + compatible = "maxim,max77836"; + interrupt-parent = <&gpx1>; + interrupts = <5 IRQ_TYPE_NONE>; + reg = <0x25>; + wakeup-source; + + extcon { + compatible = "maxim,max77836-muic"; + }; + + regulators { + compatible = "maxim,max77836-regulator"; + + SAFEOUT { + regulator-name = "SAFEOUT"; + }; + + CHARGER { + regulator-name = "CHARGER"; + regulator-min-microamp = <45000>; + regulator-max-microamp = <475000>; + regulator-boot-on; + }; + + LDO1 { + regulator-name = "MOT_2.7V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <2700000>; + }; + + LDO2 { + regulator-name = "UNUSED_LDO2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3950000>; + }; + }; + + charger { + compatible = "maxim,max77836-charger"; + + maxim,constant-uvolt = <4350000>; + maxim,fast-charge-uamp = <225000>; + maxim,eoc-uamp = <7500>; + maxim,ovp-uvolt = <6500000>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/maxim,max77686.yaml b/Documentation/devicetree/bindings/mfd/maxim,max77686.yaml index 859655a789c3..d027aabe453b 100644 --- a/Documentation/devicetree/bindings/mfd/maxim,max77686.yaml +++ b/Documentation/devicetree/bindings/mfd/maxim,max77686.yaml @@ -8,7 +8,7 @@ title: Maxim MAX77686 Power Management IC maintainers: - Chanwoo Choi <cw00.choi@samsung.com> - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> description: | This is a part of device tree bindings for Maxim MAX77686 Power Management diff --git a/Documentation/devicetree/bindings/mfd/maxim,max77693.yaml b/Documentation/devicetree/bindings/mfd/maxim,max77693.yaml new file mode 100644 index 000000000000..1b06a77ec798 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/maxim,max77693.yaml @@ -0,0 +1,143 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/maxim,max77693.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim MAX77693 MicroUSB and Companion Power Management IC + +maintainers: + - Chanwoo Choi <cw00.choi@samsung.com> + - Krzysztof Kozlowski <krzk@kernel.org> + +description: | + This is a part of device tree bindings for Maxim MAX77693 MicroUSB + Integrated Circuit (MUIC). + + The Maxim MAX77693 is a MicroUSB and Companion Power Management IC which + includes voltage current regulators, charger, LED/flash, haptic motor driver + and MicroUSB management IC. + +properties: + compatible: + const: maxim,max77693 + + interrupts: + maxItems: 1 + + reg: + maxItems: 1 + + charger: + $ref: /schemas/power/supply/maxim,max77693.yaml + + led: + $ref: /schemas/leds/maxim,max77693.yaml + + max77693-muic: + type: object + additionalProperties: false + + properties: + compatible: + const: maxim,max77693-muic + + required: + - compatible + + motor-driver: + type: object + additionalProperties: false + + properties: + compatible: + const: maxim,max77693-haptic + + haptic-supply: + description: Power supply to the haptic motor + + pwms: + maxItems: 1 + + required: + - compatible + - haptic-supply + - pwms + + regulators: + $ref: ../regulator/maxim,max77693.yaml + description: + List of child nodes that specify the regulators. + +required: + - compatible + - interrupts + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/leds/common.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@66 { + compatible = "maxim,max77693"; + reg = <0x66>; + interrupt-parent = <&gpx1>; + interrupts = <5 IRQ_TYPE_LEVEL_LOW>; + + regulators { + ESAFEOUT1 { + regulator-name = "ESAFEOUT1"; + }; + + ESAFEOUT2 { + regulator-name = "ESAFEOUT2"; + }; + + CHARGER { + regulator-name = "CHARGER"; + regulator-min-microamp = <60000>; + regulator-max-microamp = <2580000>; + }; + }; + + motor-driver { + compatible = "maxim,max77693-haptic"; + haptic-supply = <&ldo26_reg>; + pwms = <&pwm 0 38022 0>; + }; + + charger { + compatible = "maxim,max77693-charger"; + + maxim,constant-microvolt = <4350000>; + maxim,min-system-microvolt = <3600000>; + maxim,thermal-regulation-celsius = <100>; + maxim,battery-overcurrent-microamp = <3500000>; + maxim,charge-input-threshold-microvolt = <4300000>; + }; + + led { + compatible = "maxim,max77693-led"; + maxim,boost-mode = <LEDS_BOOST_FIXED>; + maxim,boost-mvout = <5000>; + maxim,mvsys-min = <2400>; + + flash-led { + label = "max77693-flash"; + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_WHITE>; + led-sources = <0>, <1>; + led-max-microamp = <500000>; + flash-max-microamp = <1250000>; + flash-max-timeout-us = <1000000>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/maxim,max77714.yaml b/Documentation/devicetree/bindings/mfd/maxim,max77714.yaml new file mode 100644 index 000000000000..edac14af101e --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/maxim,max77714.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/maxim,max77714.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MAX77714 PMIC with GPIO, RTC and watchdog from Maxim Integrated. + +maintainers: + - Luca Ceresoli <luca.ceresoli@bootlin.com> + +description: | + MAX77714 is a Power Management IC with 4 buck regulators, 9 + low-dropout regulators, 8 GPIOs, RTC and watchdog. + +properties: + compatible: + const: maxim,max77714 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + interrupt-controller: true + + "#interrupt-cells": + const: 2 + description: + The first cell is the IRQ number, the second cell is the trigger type. + + regulators: + type: object + additionalProperties: false + + patternProperties: + '^(buck[0-3]|ldo[0-8])$': + type: object + unevaluatedProperties: false + $ref: /schemas/regulator/regulator.yaml# + +required: + - compatible + - reg + - interrupts + - interrupt-controller + - "#interrupt-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@1c { + compatible = "maxim,max77714"; + reg = <0x1c>; + interrupt-parent = <&gpio2>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/maxim,max77802.yaml b/Documentation/devicetree/bindings/mfd/maxim,max77802.yaml new file mode 100644 index 000000000000..ad2013900b03 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/maxim,max77802.yaml @@ -0,0 +1,194 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/maxim,max77802.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim MAX77802 Power Management IC + +maintainers: + - Javier Martinez Canillas <javier@dowhile0.org> + - Krzysztof Kozlowski <krzk@kernel.org> + +description: | + This is a part of device tree bindings for Maxim MAX77802 Power Management + Integrated Circuit (PMIC). + + The Maxim MAX77802 is a Power Management IC which includes voltage and + current regulators (10 high efficiency Buck regulators and 32 Low-DropOut + (LDO)), RTC and clock outputs. + + The MAX77802 provides two 32.768khz clock outputs that can be controlled + (gated/ungated) over I2C. The clock IDs are defined as preprocessor macros + in dt-bindings/clock/maxim,max77802.h. + +properties: + compatible: + const: maxim,max77802 + + '#clock-cells': + const: 1 + + interrupts: + maxItems: 1 + + reg: + maxItems: 1 + + regulators: + $ref: /schemas/regulator/maxim,max77802.yaml + description: + List of child nodes that specify the regulators. + + inb1-supply: + description: Power supply for buck1 + inb2-supply: + description: Power supply for buck2 + inb3-supply: + description: Power supply for buck3 + inb4-supply: + description: Power supply for buck4 + inb5-supply: + description: Power supply for buck5 + inb6-supply: + description: Power supply for buck6 + inb7-supply: + description: Power supply for buck7 + inb8-supply: + description: Power supply for buck8 + inb9-supply: + description: Power supply for buck9 + inb10-supply: + description: Power supply for buck10 + + inl1-supply: + description: Power supply for LDO8, LDO15 + inl2-supply: + description: Power supply for LDO17, LDO27, LDO30, LDO35 + inl3-supply: + description: Power supply for LDO3, LDO5, LDO7, LDO7 + inl4-supply: + description: Power supply for LDO10, LDO11, LDO13, LDO14 + inl5-supply: + description: Power supply for LDO9, LDO19 + inl6-supply: + description: Power supply for LDO4, LDO21, LDO24, LDO33 + inl7-supply: + description: Power supply for LDO18, LDO20, LDO28, LDO29 + inl9-supply: + description: Power supply for LDO12, LDO23, LDO25, LDO26, LDO32, LDO34 + inl10-supply: + description: Power supply for LDO1, LDO2 + + wakeup-source: true + +required: + - compatible + - '#clock-cells' + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/regulator/maxim,max77802.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@9 { + compatible = "maxim,max77802"; + interrupt-parent = <&gpx3>; + interrupts = <1 IRQ_TYPE_NONE>; + pinctrl-names = "default"; + pinctrl-0 = <&max77802_irq>, <&pmic_selb>, + <&pmic_dvs_1>, <&pmic_dvs_2>, <&pmic_dvs_3>; + wakeup-source; + reg = <0x9>; + #clock-cells = <1>; + + inb1-supply = <&tps65090_dcdc2>; + inb2-supply = <&tps65090_dcdc1>; + inb3-supply = <&tps65090_dcdc2>; + inb4-supply = <&tps65090_dcdc2>; + inb5-supply = <&tps65090_dcdc1>; + inb6-supply = <&tps65090_dcdc2>; + inb7-supply = <&tps65090_dcdc1>; + inb8-supply = <&tps65090_dcdc1>; + inb9-supply = <&tps65090_dcdc1>; + inb10-supply = <&tps65090_dcdc1>; + + inl1-supply = <&buck5_reg>; + inl2-supply = <&buck7_reg>; + inl3-supply = <&buck9_reg>; + inl4-supply = <&buck9_reg>; + inl5-supply = <&buck9_reg>; + inl6-supply = <&tps65090_dcdc2>; + inl7-supply = <&buck9_reg>; + inl9-supply = <&tps65090_dcdc2>; + inl10-supply = <&buck7_reg>; + + regulators { + BUCK1 { + regulator-name = "vdd_mif"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + regulator-ramp-delay = <12500>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + BUCK2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + regulator-ramp-delay = <12500>; + regulator-coupled-with = <&buck3_reg>; + regulator-coupled-max-spread = <300000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + // ... + + BUCK10 { + regulator-name = "vdd_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + LDO1 { + regulator-name = "vdd_1v0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-initial-mode = <MAX77802_OPMODE_NORMAL>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-mode = <MAX77802_OPMODE_LP>; + }; + }; + + // ... + + LDO35 { + regulator-name = "ldo_35"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/maxim,max77843.yaml b/Documentation/devicetree/bindings/mfd/maxim,max77843.yaml new file mode 100644 index 000000000000..f30f96bbff43 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/maxim,max77843.yaml @@ -0,0 +1,144 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/maxim,max77843.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim MAX77843 MicroUSB and Companion Power Management IC + +maintainers: + - Krzysztof Kozlowski <krzk@kernel.org> + +description: | + This is a part of device tree bindings for Maxim MAX77843 MicroUSB + Integrated Circuit (MUIC). + + The Maxim MAX77843 is a MicroUSB and Companion Power Management IC which + includes voltage current regulators, charger, fuel-gauge, haptic motor driver + and MicroUSB management IC. + +properties: + compatible: + const: maxim,max77843 + + interrupts: + maxItems: 1 + + reg: + maxItems: 1 + + extcon: + $ref: /schemas/extcon/maxim,max77843.yaml + + motor-driver: + type: object + properties: + compatible: + const: maxim,max77843-haptic + + haptic-supply: + description: Power supply to the haptic motor + + pwms: + maxItems: 1 + + required: + - compatible + - haptic-supply + - pwms + + regulators: + $ref: /schemas/regulator/maxim,max77843.yaml + +required: + - compatible + - interrupts + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@66 { + compatible = "maxim,max77843"; + interrupt-parent = <&gpa1>; + interrupts = <5 IRQ_TYPE_EDGE_FALLING>; + reg = <0x66>; + + extcon { + compatible = "maxim,max77843-muic"; + + connector { + compatible = "samsung,usb-connector-11pin", + "usb-b-connector"; + label = "micro-USB"; + type = "micro"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + /* + * TODO: The DTS this is based on does not have + * port@0 which is a required property. The ports + * look incomplete and need fixing. + * Add a disabled port just to satisfy dtschema. + */ + reg = <0>; + status = "disabled"; + }; + + port@3 { + reg = <3>; + endpoint { + remote-endpoint = <&mhl_to_musb_con>; + }; + }; + }; + }; + + ports { + port { + endpoint { + remote-endpoint = <&usb_to_muic>; + }; + }; + }; + }; + + regulators { + compatible = "maxim,max77843-regulator"; + + SAFEOUT1 { + regulator-name = "SAFEOUT1"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <4950000>; + }; + + SAFEOUT2 { + regulator-name = "SAFEOUT2"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <4950000>; + }; + + CHARGER { + regulator-name = "CHARGER"; + regulator-min-microamp = <100000>; + regulator-max-microamp = <3150000>; + }; + }; + + motor-driver { + compatible = "maxim,max77843-haptic"; + haptic-supply = <&ldo38_reg>; + pwms = <&pwm 0 33670 0>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/mediatek,mt6360.yaml b/Documentation/devicetree/bindings/mfd/mediatek,mt6360.yaml new file mode 100644 index 000000000000..28eee02441ee --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/mediatek,mt6360.yaml @@ -0,0 +1,256 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/mediatek,mt6360.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MT6360 PMIC from MediaTek Integrated + +maintainers: + - Gene Chen <gene_chen@richtek.com> + +description: | + MT6360 is a PMIC device with the following sub modules. + It is interfaced to host controller using I2C interface. + + This document describes the binding for PMIC device and its sub module. + +properties: + compatible: + const: mediatek,mt6360 + + reg: + maxItems: 1 + + wakeup-source: true + + interrupts: + maxItems: 1 + + interrupt-names: + const: IRQB + + interrupt-controller: true + + "#interrupt-cells": + const: 1 + description: + The first cell is the IRQ number. + + regulators: + $ref: /schemas/regulator/mt6360-regulator.yaml# + + charger: + $ref: /schemas/power/supply/mt6360_charger.yaml# + + tcpc: + $ref: /schemas/usb/mediatek,mt6360-tcpc.yaml# + + led-controller: + $ref: /schemas/leds/leds-mt6360.yaml# + +required: + - compatible + - reg + - interrupts + - interrupt-controller + - "#interrupt-cells" + +additionalProperties: + type: object + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/regulator/mediatek,mt6360-regulator.h> + #include <dt-bindings/leds/common.h> + #include <dt-bindings/usb/pd.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@34 { + compatible = "mediatek,mt6360"; + reg = <0x34>; + wakeup-source; + interrupts-extended = <&gpio26 0 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "IRQB"; + interrupt-controller; + #interrupt-cells = <1>; + + mt6360_charger: charger { + compatible = "mediatek,mt6360-chg"; + richtek,vinovp-microvolt = <14500000>; + + otg_vbus_regulator: usb-otg-vbus-regulator { + regulator-compatible = "usb-otg-vbus"; + regulator-name = "usb-otg-vbus"; + regulator-min-microvolt = <4425000>; + regulator-max-microvolt = <5825000>; + }; + }; + + led-controller { + compatible = "mediatek,mt6360-led"; + #address-cells = <1>; + #size-cells = <0>; + + multi-led@0 { + reg = <0>; + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_RGB>; + led-max-microamp = <24000>; + #address-cells = <1>; + #size-cells = <0>; + led@0 { + reg = <0>; + color = <LED_COLOR_ID_RED>; + }; + led@1 { + reg = <1>; + color = <LED_COLOR_ID_GREEN>; + }; + led@2 { + reg = <2>; + color = <LED_COLOR_ID_BLUE>; + }; + }; + led@3 { + reg = <3>; + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_WHITE>; + led-max-microamp = <150000>; + }; + led@4 { + reg = <4>; + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_WHITE>; + function-enumerator = <1>; + led-max-microamp = <200000>; + flash-max-microamp = <500000>; + flash-max-timeout-us = <1024000>; + }; + led@5 { + reg = <5>; + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_WHITE>; + function-enumerator = <2>; + led-max-microamp = <200000>; + flash-max-microamp = <500000>; + flash-max-timeout-us = <1024000>; + }; + }; + + regulators { + compatible = "mediatek,mt6360-regulator"; + LDO_VIN3-supply = <&BUCK2>; + buck1 { + regulator-compatible = "BUCK1"; + regulator-name = "mt6360,buck1"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1300000>; + regulator-allowed-modes = <MT6360_OPMODE_NORMAL + MT6360_OPMODE_LP + MT6360_OPMODE_ULP>; + }; + BUCK2: buck2 { + regulator-compatible = "BUCK2"; + regulator-name = "mt6360,buck2"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1300000>; + regulator-allowed-modes = <MT6360_OPMODE_NORMAL + MT6360_OPMODE_LP + MT6360_OPMODE_ULP>; + }; + ldo6 { + regulator-compatible = "LDO6"; + regulator-name = "mt6360,ldo6"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <2100000>; + regulator-allowed-modes = <MT6360_OPMODE_NORMAL + MT6360_OPMODE_LP>; + }; + ldo7 { + regulator-compatible = "LDO7"; + regulator-name = "mt6360,ldo7"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <2100000>; + regulator-allowed-modes = <MT6360_OPMODE_NORMAL + MT6360_OPMODE_LP>; + }; + ldo1 { + regulator-compatible = "LDO1"; + regulator-name = "mt6360,ldo1"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3600000>; + regulator-allowed-modes = <MT6360_OPMODE_NORMAL + MT6360_OPMODE_LP>; + }; + ldo2 { + regulator-compatible = "LDO2"; + regulator-name = "mt6360,ldo2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3600000>; + regulator-allowed-modes = <MT6360_OPMODE_NORMAL + MT6360_OPMODE_LP>; + }; + ldo3 { + regulator-compatible = "LDO3"; + regulator-name = "mt6360,ldo3"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3600000>; + regulator-allowed-modes = <MT6360_OPMODE_NORMAL + MT6360_OPMODE_LP>; + }; + ldo5 { + regulator-compatible = "LDO5"; + regulator-name = "mt6360,ldo5"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3600000>; + regulator-allowed-modes = <MT6360_OPMODE_NORMAL + MT6360_OPMODE_LP>; + }; + }; + + tcpc { + compatible = "mediatek,mt6360-tcpc"; + interrupts-extended = <&gpio26 3 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "PD_IRQB"; + + connector { + compatible = "usb-c-connector"; + label = "USB-C"; + data-role = "dual"; + power-role = "dual"; + try-power-role = "sink"; + source-pdos = <PDO_FIXED(5000, 1000, PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP)>; + sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP)>; + op-sink-microwatt = <10000000>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + endpoint { + remote-endpoint = <&usb_hs>; + }; + }; + port@1 { + reg = <1>; + endpoint { + remote-endpoint = <&usb_ss>; + }; + }; + port@2 { + reg = <2>; + endpoint { + remote-endpoint = <&dp_aux>; + }; + }; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/mt6397.txt b/Documentation/devicetree/bindings/mfd/mt6397.txt index 99a84b69a29f..293db2a71ef2 100644 --- a/Documentation/devicetree/bindings/mfd/mt6397.txt +++ b/Documentation/devicetree/bindings/mfd/mt6397.txt @@ -20,7 +20,7 @@ This document describes the binding for MFD device and its sub module. Required properties: compatible: "mediatek,mt6323" for PMIC MT6323 - "mediatek,mt6358" for PMIC MT6358 + "mediatek,mt6358" for PMIC MT6358 and MT6366 "mediatek,mt6359" for PMIC MT6359 "mediatek,mt6397" for PMIC MT6397 diff --git a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt index 7a27c500ff63..eb78e3ae7703 100644 --- a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt +++ b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt @@ -35,6 +35,7 @@ Required properties: "qcom,pm8916", "qcom,pm8941", "qcom,pm8950", + "qcom,pm8953", "qcom,pm8994", "qcom,pm8998", "qcom,pma8084", @@ -58,7 +59,7 @@ Required properties for peripheral child nodes: Optional properties for peripheral child nodes: - interrupts: Interrupts are specified as a 4-tuple. For more information see: - Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt + Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml - interrupt-names: Corresponding interrupt name to the interrupts property Each child node of SPMI slave id represents a function of the PMIC. In the diff --git a/Documentation/devicetree/bindings/mfd/qcom,tcsr.txt b/Documentation/devicetree/bindings/mfd/qcom,tcsr.txt index c5f4f0ddfcc3..add61bcc3c74 100644 --- a/Documentation/devicetree/bindings/mfd/qcom,tcsr.txt +++ b/Documentation/devicetree/bindings/mfd/qcom,tcsr.txt @@ -10,6 +10,7 @@ Required properties: "qcom,tcsr-ipq8064", "syscon" for IPQ8064 "qcom,tcsr-apq8064", "syscon" for APQ8064 "qcom,tcsr-msm8660", "syscon" for MSM8660 + "qcom,tcsr-msm8953", "syscon" for MSM8953 "qcom,tcsr-msm8960", "syscon" for MSM8960 "qcom,tcsr-msm8974", "syscon" for MSM8974 "qcom,tcsr-apq8084", "syscon" for APQ8084 diff --git a/Documentation/devicetree/bindings/mfd/rk808.txt b/Documentation/devicetree/bindings/mfd/rk808.txt deleted file mode 100644 index 23a17a6663ec..000000000000 --- a/Documentation/devicetree/bindings/mfd/rk808.txt +++ /dev/null @@ -1,465 +0,0 @@ -RK8XX Power Management Integrated Circuit - -The rk8xx family current members: -rk805 -rk808 -rk809 -rk817 -rk818 - -Required properties: -- compatible: "rockchip,rk805" -- compatible: "rockchip,rk808" -- compatible: "rockchip,rk809" -- compatible: "rockchip,rk817" -- compatible: "rockchip,rk818" -- reg: I2C slave address -- interrupts: the interrupt outputs of the controller. -- #clock-cells: from common clock binding; shall be set to 1 (multiple clock - outputs). See <dt-bindings/clock/rockchip,rk808.h> for clock IDs. - -Optional properties: -- clock-output-names: From common clock binding to override the - default output clock name -- rockchip,system-power-controller: Telling whether or not this pmic is controlling - the system power. -- wakeup-source: Device can be used as a wakeup source. - -Optional RK805 properties: -- vcc1-supply: The input supply for DCDC_REG1 -- vcc2-supply: The input supply for DCDC_REG2 -- vcc3-supply: The input supply for DCDC_REG3 -- vcc4-supply: The input supply for DCDC_REG4 -- vcc5-supply: The input supply for LDO_REG1 and LDO_REG2 -- vcc6-supply: The input supply for LDO_REG3 - -Optional RK808 properties: -- vcc1-supply: The input supply for DCDC_REG1 -- vcc2-supply: The input supply for DCDC_REG2 -- vcc3-supply: The input supply for DCDC_REG3 -- vcc4-supply: The input supply for DCDC_REG4 -- vcc6-supply: The input supply for LDO_REG1 and LDO_REG2 -- vcc7-supply: The input supply for LDO_REG3 and LDO_REG7 -- vcc8-supply: The input supply for SWITCH_REG1 -- vcc9-supply: The input supply for LDO_REG4 and LDO_REG5 -- vcc10-supply: The input supply for LDO_REG6 -- vcc11-supply: The input supply for LDO_REG8 -- vcc12-supply: The input supply for SWITCH_REG2 -- dvs-gpios: buck1/2 can be controlled by gpio dvs, this is GPIO specifiers - for 2 host gpio's used for dvs. The format of the gpio specifier depends in - the gpio controller. If DVS GPIOs aren't present, voltage changes will happen - very quickly with no slow ramp time. - -Optional shared RK809 and RK817 properties: -- vcc1-supply: The input supply for DCDC_REG1 -- vcc2-supply: The input supply for DCDC_REG2 -- vcc3-supply: The input supply for DCDC_REG3 -- vcc4-supply: The input supply for DCDC_REG4 -- vcc5-supply: The input supply for LDO_REG1, LDO_REG2, LDO_REG3 -- vcc6-supply: The input supply for LDO_REG4, LDO_REG5, LDO_REG6 -- vcc7-supply: The input supply for LDO_REG7, LDO_REG8, LDO_REG9 - -Optional RK809 properties: -- vcc8-supply: The input supply for SWITCH_REG1 -- vcc9-supply: The input supply for DCDC_REG5, SWITCH_REG2 - -Optional RK817 properties: -- clocks: The input clock for the audio codec -- clock-names: The clock name for the codec clock. Should be "mclk". -- #sound-dai-cells: Needed for the interpretation of sound dais. Should be 0. - -- vcc8-supply: The input supply for BOOST -- vcc9-supply: The input supply for OTG_SWITCH -- codec: The child node for the codec to hold additional properties. - If no additional properties are required for the codec, this - node can be omitted. - -- rockchip,mic-in-differential: Telling if the microphone uses differential - mode. Should be under the codec child node. - -Optional RK818 properties: -- vcc1-supply: The input supply for DCDC_REG1 -- vcc2-supply: The input supply for DCDC_REG2 -- vcc3-supply: The input supply for DCDC_REG3 -- vcc4-supply: The input supply for DCDC_REG4 -- boost-supply: The input supply for DCDC_BOOST -- vcc6-supply: The input supply for LDO_REG1 and LDO_REG2 -- vcc7-supply: The input supply for LDO_REG3, LDO_REG5 and LDO_REG7 -- vcc8-supply: The input supply for LDO_REG4, LDO_REG6 and LDO_REG8 -- vcc9-supply: The input supply for LDO_REG9 and SWITCH_REG -- h_5v-supply: The input supply for HDMI_SWITCH -- usb-supply: The input supply for OTG_SWITCH - -Regulators: All the regulators of RK8XX to be instantiated shall be -listed in a child node named 'regulators'. Each regulator is represented -by a child node of the 'regulators' node. - - regulator-name { - /* standard regulator bindings here */ - }; - -Following regulators of the RK805 PMIC regulators are supported. Note that -the 'n' in regulator name, as in DCDC_REGn or LDOn, represents the DCDC or LDO -number as described in RK805 datasheet. - - - DCDC_REGn - - valid values for n are 1 to 4. - - LDO_REGn - - valid values for n are 1 to 3 - -Following regulators of the RK808 PMIC block are supported. Note that -the 'n' in regulator name, as in DCDC_REGn or LDOn, represents the DCDC or LDO -number as described in RK808 datasheet. - - - DCDC_REGn - - valid values for n are 1 to 4. - - LDO_REGn - - valid values for n are 1 to 8. - - SWITCH_REGn - - valid values for n are 1 to 2 - -Following regulators of the RK809 and RK817 PMIC blocks are supported. Note that -the 'n' in regulator name, as in DCDC_REGn or LDOn, represents the DCDC or LDO -number as described in RK809 and RK817 datasheets. - - - DCDC_REGn - - valid values for n are 1 to 5 for RK809. - - valid values for n are 1 to 4 for RK817. - - LDO_REGn - - valid values for n are 1 to 9 for RK809. - - valid values for n are 1 to 9 for RK817. - - SWITCH_REGn - - valid values for n are 1 to 2 for RK809. - - BOOST for RK817 - - OTG_SWITCH for RK817 - -Following regulators of the RK818 PMIC block are supported. Note that -the 'n' in regulator name, as in DCDC_REGn or LDOn, represents the DCDC or LDO -number as described in RK818 datasheet. - - - DCDC_REGn - - valid values for n are 1 to 4. - - LDO_REGn - - valid values for n are 1 to 9. - - SWITCH_REG - - HDMI_SWITCH - - OTG_SWITCH - -It is necessary to configure three pins for both the RK809 and RK817, the three -pins are "gpio_ts" "gpio_gt" "gpio_slp". - The gpio_gt and gpio_ts pins support the gpio function. - The gpio_slp pin is for controlling the pmic states, as below: - - reset - - power down - - sleep - -Standard regulator bindings are used inside regulator subnodes. Check - Documentation/devicetree/bindings/regulator/regulator.txt -for more details - -Example: - rk808: pmic@1b { - compatible = "rockchip,rk808"; - clock-output-names = "xin32k", "rk808-clkout2"; - interrupt-parent = <&gpio0>; - interrupts = <4 IRQ_TYPE_LEVEL_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&pmic_int &dvs_1 &dvs_2>; - dvs-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>, - <&gpio7 15 GPIO_ACTIVE_HIGH>; - reg = <0x1b>; - rockchip,system-power-controller; - wakeup-source; - #clock-cells = <1>; - - vcc8-supply = <&vcc_18>; - vcc9-supply = <&vcc_io>; - vcc10-supply = <&vcc_io>; - vcc12-supply = <&vcc_io>; - vddio-supply = <&vccio_pmu>; - - regulators { - vdd_cpu: DCDC_REG1 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1300000>; - regulator-name = "vdd_arm"; - }; - - vdd_gpu: DCDC_REG2 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <1250000>; - regulator-name = "vdd_gpu"; - }; - - vcc_ddr: DCDC_REG3 { - regulator-always-on; - regulator-boot-on; - regulator-name = "vcc_ddr"; - }; - - vcc_io: DCDC_REG4 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc_io"; - }; - - vccio_pmu: LDO_REG1 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vccio_pmu"; - }; - - vcc_tp: LDO_REG2 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc_tp"; - }; - - vdd_10: LDO_REG3 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-name = "vdd_10"; - }; - - vcc18_lcd: LDO_REG4 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "vcc18_lcd"; - }; - - vccio_sd: LDO_REG5 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vccio_sd"; - }; - - vdd10_lcd: LDO_REG6 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-name = "vdd10_lcd"; - }; - - vcc_18: LDO_REG7 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "vcc_18"; - }; - - vcca_codec: LDO_REG8 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcca_codec"; - }; - - vcc_wl: SWITCH_REG1 { - regulator-always-on; - regulator-boot-on; - regulator-name = "vcc_wl"; - }; - - vcc_lcd: SWITCH_REG2 { - regulator-always-on; - regulator-boot-on; - regulator-name = "vcc_lcd"; - }; - }; - }; - - rk817: pmic@20 { - compatible = "rockchip,rk817"; - reg = <0x20>; - interrupt-parent = <&gpio0>; - interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>; - clock-output-names = "rk808-clkout1", "xin32k"; - clock-names = "mclk"; - clocks = <&cru SCLK_I2S1_OUT>; - pinctrl-names = "default"; - pinctrl-0 = <&pmic_int>, <&i2s1_2ch_mclk>; - wakeup-source; - #clock-cells = <1>; - #sound-dai-cells = <0>; - - vcc1-supply = <&vccsys>; - vcc2-supply = <&vccsys>; - vcc3-supply = <&vccsys>; - vcc4-supply = <&vccsys>; - vcc5-supply = <&vccsys>; - vcc6-supply = <&vccsys>; - vcc7-supply = <&vccsys>; - - regulators { - vdd_logic: DCDC_REG1 { - regulator-name = "vdd_logic"; - regulator-min-microvolt = <950000>; - regulator-max-microvolt = <1150000>; - regulator-ramp-delay = <6001>; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <950000>; - }; - }; - - vdd_arm: DCDC_REG2 { - regulator-name = "vdd_arm"; - regulator-min-microvolt = <950000>; - regulator-max-microvolt = <1350000>; - regulator-ramp-delay = <6001>; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-off-in-suspend; - regulator-suspend-microvolt = <950000>; - }; - }; - - vcc_ddr: DCDC_REG3 { - regulator-name = "vcc_ddr"; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - vcc_3v3: DCDC_REG4 { - regulator-name = "vcc_3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-off-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vcc_1v8: LDO_REG2 { - regulator-name = "vcc_1v8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vdd_1v0: LDO_REG3 { - regulator-name = "vdd_1v0"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1000000>; - }; - }; - - vcc3v3_pmu: LDO_REG4 { - regulator-name = "vcc3v3_pmu"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vccio_sd: LDO_REG5 { - regulator-name = "vccio_sd"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vcc_sd: LDO_REG6 { - regulator-name = "vcc_sd"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vcc_bl: LDO_REG7 { - regulator-name = "vcc_bl"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - regulator-state-mem { - regulator-off-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vcc_lcd: LDO_REG8 { - regulator-name = "vcc_lcd"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - - regulator-state-mem { - regulator-off-in-suspend; - regulator-suspend-microvolt = <2800000>; - }; - }; - - vcc_cam: LDO_REG9 { - regulator-name = "vcc_cam"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - - regulator-state-mem { - regulator-off-in-suspend; - regulator-suspend-microvolt = <3000000>; - }; - }; - }; - - rk817_codec: codec { - rockchip,mic-in-differential; - }; - }; diff --git a/Documentation/devicetree/bindings/mfd/rockchip,rk805.yaml b/Documentation/devicetree/bindings/mfd/rockchip,rk805.yaml new file mode 100644 index 000000000000..4992f71b6fc3 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/rockchip,rk805.yaml @@ -0,0 +1,219 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/rockchip,rk805.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RK805 Power Management Integrated Circuit + +maintainers: + - Chris Zhong <zyw@rock-chips.com> + - Zhang Qing <zhangqing@rock-chips.com> + +description: | + Rockchip RK805 series PMIC. This device consists of an i2c controlled MFD + that includes multiple switchable regulators. + +properties: + compatible: + enum: + - rockchip,rk805 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + '#clock-cells': + description: + See <dt-bindings/clock/rockchip,rk808.h> for clock IDs. + minimum: 0 + maximum: 1 + + clock-output-names: + description: + From common clock binding to override the default output clock name. + + gpio-controller: true + + '#gpio-cells': + const: 2 + + rockchip,system-power-controller: + type: boolean + description: + Telling whether or not this PMIC is controlling the system power. + + wakeup-source: + type: boolean + description: + Device can be used as a wakeup source. + + vcc1-supply: + description: + The input supply for DCDC_REG1. + + vcc2-supply: + description: + The input supply for DCDC_REG2. + + vcc3-supply: + description: + The input supply for DCDC_REG3. + + vcc4-supply: + description: + The input supply for DCDC_REG4. + + vcc5-supply: + description: + The input supply for LDO_REG1 and LDO_REG2. + + vcc6-supply: + description: + The input supply for LDO_REG3. + + regulators: + type: object + patternProperties: + "^(DCDC_REG[1-4]|LDO_REG[1-3])$": + type: object + $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false + +allOf: + - if: + properties: + '#clock-cells': + const: 0 + + then: + properties: + clock-output-names: + maxItems: 1 + + else: + properties: + clock-output-names: + maxItems: 2 + +required: + - compatible + - reg + - interrupts + - "#clock-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/pinctrl/rockchip.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/gpio/gpio.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@18 { + compatible = "rockchip,rk805"; + reg = <0x18>; + interrupt-parent = <&gpio2>; + interrupts = <RK_PA6 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>; + rockchip,system-power-controller; + wakeup-source; + #clock-cells = <0>; + + vcc1-supply = <&vcc_sys>; + vcc2-supply = <&vcc_sys>; + vcc3-supply = <&vcc_sys>; + vcc4-supply = <&vcc_sys>; + vcc5-supply = <&vcc_io>; + vcc6-supply = <&vcc_io>; + + regulators { + vdd_logic: DCDC_REG1 { + regulator-name = "vdd_logic"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vdd_arm: DCDC_REG2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <950000>; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_io: DCDC_REG4 { + regulator-name = "vcc_io"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vdd_18: LDO_REG1 { + regulator-name = "vdd_18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc18_emmc: LDO_REG2 { + regulator-name = "vcc_18emmc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_11: LDO_REG3 { + regulator-name = "vdd_11"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1100000>; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/rockchip,rk808.yaml b/Documentation/devicetree/bindings/mfd/rockchip,rk808.yaml new file mode 100644 index 000000000000..f5908fa01a61 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/rockchip,rk808.yaml @@ -0,0 +1,257 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/rockchip,rk808.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RK808 Power Management Integrated Circuit + +maintainers: + - Chris Zhong <zyw@rock-chips.com> + - Zhang Qing <zhangqing@rock-chips.com> + +description: | + Rockchip RK808 series PMIC. This device consists of an i2c controlled MFD + that includes regulators, an RTC, and a power button. + +properties: + compatible: + enum: + - rockchip,rk808 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + '#clock-cells': + description: + See <dt-bindings/clock/rockchip,rk808.h> for clock IDs. + const: 1 + + clock-output-names: + description: + From common clock binding to override the default output clock name. + maxItems: 2 + + rockchip,system-power-controller: + type: boolean + description: + Telling whether or not this PMIC is controlling the system power. + + wakeup-source: + type: boolean + description: + Device can be used as a wakeup source. + + vcc1-supply: + description: + The input supply for DCDC_REG1. + + vcc2-supply: + description: + The input supply for DCDC_REG2. + + vcc3-supply: + description: + The input supply for DCDC_REG3. + + vcc4-supply: + description: + The input supply for DCDC_REG4. + + vcc6-supply: + description: + The input supply for LDO_REG1 and LDO_REG2. + + vcc7-supply: + description: + The input supply for LDO_REG3 and LDO_REG7. + + vcc8-supply: + description: + The input supply for SWITCH_REG1. + + vcc9-supply: + description: + The input supply for LDO_REG4 and LDO_REG5. + + vcc10-supply: + description: + The input supply for LDO_REG6. + + vcc11-supply: + description: + The input supply for LDO_REG8. + + vcc12-supply: + description: + The input supply for SWITCH_REG2. + + vddio-supply: + description: + The input supply for digital IO. + + dvs-gpios: + description: | + buck1/2 can be controlled by gpio dvs, this is GPIO specifiers for + 2 host gpio's used for dvs. The format of the gpio specifier + depends in the gpio controller. If DVS GPIOs aren't present, + voltage changes will happen very quickly with no slow ramp time. + maxItems: 2 + + regulators: + type: object + patternProperties: + "^(DCDC_REG[1-4]|LDO_REG[1-8]|SWITCH_REG[1-2])$": + type: object + $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false + +required: + - compatible + - reg + - interrupts + - "#clock-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/pinctrl/rockchip.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/gpio/gpio.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + rk808: pmic@1b { + compatible = "rockchip,rk808"; + clock-output-names = "xin32k", "rk808-clkout2"; + interrupt-parent = <&gpio0>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int &dvs_1 &dvs_2>; + dvs-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>, + <&gpio7 15 GPIO_ACTIVE_HIGH>; + reg = <0x1b>; + rockchip,system-power-controller; + wakeup-source; + #clock-cells = <1>; + + vcc8-supply = <&vcc_18>; + vcc9-supply = <&vcc_io>; + vcc10-supply = <&vcc_io>; + vcc12-supply = <&vcc_io>; + vddio-supply = <&vccio_pmu>; + + regulators { + vdd_cpu: DCDC_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1300000>; + regulator-name = "vdd_arm"; + }; + + vdd_gpu: DCDC_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1250000>; + regulator-name = "vdd_gpu"; + }; + + vcc_ddr: DCDC_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc_ddr"; + }; + + vcc_io: DCDC_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_io"; + }; + + vccio_pmu: LDO_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vccio_pmu"; + }; + + vcc_tp: LDO_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_tp"; + }; + + vdd_10: LDO_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-name = "vdd_10"; + }; + + vcc18_lcd: LDO_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc18_lcd"; + }; + + vccio_sd: LDO_REG5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vccio_sd"; + }; + + vdd10_lcd: LDO_REG6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-name = "vdd10_lcd"; + }; + + vcc_18: LDO_REG7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_18"; + }; + + vcca_codec: LDO_REG8 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcca_codec"; + }; + + vcc_wl: SWITCH_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc_wl"; + }; + + vcc_lcd: SWITCH_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc_lcd"; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/rockchip,rk809.yaml b/Documentation/devicetree/bindings/mfd/rockchip,rk809.yaml new file mode 100644 index 000000000000..7fb849ac74a7 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/rockchip,rk809.yaml @@ -0,0 +1,284 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/rockchip,rk809.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RK809 Power Management Integrated Circuit + +maintainers: + - Chris Zhong <zyw@rock-chips.com> + - Zhang Qing <zhangqing@rock-chips.com> + +description: | + Rockchip RK809 series PMIC. This device consists of an i2c controlled MFD + that includes regulators, an RTC, and power button. + +properties: + compatible: + enum: + - rockchip,rk809 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + '#clock-cells': + description: | + See <dt-bindings/clock/rockchip,rk808.h> for clock IDs. + minimum: 0 + maximum: 1 + + clock-output-names: + description: + From common clock binding to override the default output clock name. + + rockchip,system-power-controller: + type: boolean + description: + Telling whether or not this PMIC is controlling the system power. + + wakeup-source: + type: boolean + description: + Device can be used as a wakeup source. + + vcc1-supply: + description: + The input supply for DCDC_REG1. + + vcc2-supply: + description: + The input supply for DCDC_REG2. + + vcc3-supply: + description: + The input supply for DCDC_REG3. + + vcc4-supply: + description: + The input supply for DCDC_REG4. + + vcc5-supply: + description: + The input supply for LDO_REG1, LDO_REG2, and LDO_REG3. + + vcc6-supply: + description: + The input supply for LDO_REG4, LDO_REG5, and LDO_REG6. + + vcc7-supply: + description: + The input supply for LDO_REG7, LDO_REG8, and LDO_REG9. + + vcc8-supply: + description: + The input supply for SWITCH_REG1. + + vcc9-supply: + description: + The input supply for DCDC_REG5 and SWITCH_REG2. + + regulators: + type: object + patternProperties: + "^(LDO_REG[1-9]|DCDC_REG[1-5]|SWITCH_REG[1-2])$": + type: object + $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false + +allOf: + - if: + properties: + '#clock-cells': + const: 0 + + then: + properties: + clock-output-names: + maxItems: 1 + + else: + properties: + clock-output-names: + maxItems: 2 + +required: + - compatible + - reg + - interrupts + - "#clock-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/pinctrl/rockchip.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/gpio/gpio.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + rk808: pmic@1b { + compatible = "rockchip,rk808"; + reg = <0x1b>; + #clock-cells = <1>; + clock-output-names = "xin32k", "rk808-clkout2"; + interrupt-parent = <&gpio3>; + interrupts = <10 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l_pin>; + rockchip,system-power-controller; + wakeup-source; + + vcc1-supply = <&vcc_sysin>; + vcc2-supply = <&vcc_sysin>; + vcc3-supply = <&vcc_sysin>; + vcc4-supply = <&vcc_sysin>; + vcc6-supply = <&vcc_sysin>; + vcc7-supply = <&vcc_sysin>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc_sysin>; + vcc10-supply = <&vcc_sysin>; + vcc11-supply = <&vcc_sysin>; + vcc12-supply = <&vcc3v3_sys>; + + regulators { + vdd_center: DCDC_REG1 { + regulator-name = "vdd_center"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_l: DCDC_REG2 { + regulator-name = "vdd_cpu_l"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_1v8: vcc_wl: DCDC_REG4 { + regulator-name = "vcc_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc1v8_pmupll: LDO_REG3 { + regulator-name = "vcc1v8_pmupll"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc_sdio: LDO_REG4 { + regulator-name = "vcc_sdio"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcca3v0_codec: LDO_REG5 { + regulator-name = "vcca3v0_codec"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v5: LDO_REG6 { + regulator-name = "vcc_1v5"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1500000>; + }; + }; + + vcca1v8_codec: LDO_REG7 { + regulator-name = "vcca1v8_codec"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v0: LDO_REG8 { + regulator-name = "vcc_3v0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcc3v3_s3: SWITCH_REG1 { + regulator-name = "vcc3v3_s3"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_s0: SWITCH_REG2 { + regulator-name = "vcc3v3_s0"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/rockchip,rk817.yaml b/Documentation/devicetree/bindings/mfd/rockchip,rk817.yaml new file mode 100644 index 000000000000..bfc1720adc43 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/rockchip,rk817.yaml @@ -0,0 +1,330 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/rockchip,rk817.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RK817 Power Management Integrated Circuit + +maintainers: + - Chris Zhong <zyw@rock-chips.com> + - Zhang Qing <zhangqing@rock-chips.com> + +description: | + Rockchip RK817 series PMIC. This device consists of an i2c controlled MFD + that includes regulators, an RTC, a power button, an audio codec, and a + battery charger manager. + +properties: + compatible: + enum: + - rockchip,rk817 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + '#clock-cells': + description: + See <dt-bindings/clock/rockchip,rk808.h> for clock IDs. + minimum: 0 + maximum: 1 + + clock-output-names: + description: + From common clock binding to override the default output clock name. + + rockchip,system-power-controller: + type: boolean + description: + Telling whether or not this PMIC is controlling the system power. + + wakeup-source: + type: boolean + description: + Device can be used as a wakeup source. + + vcc1-supply: + description: + The input supply for DCDC_REG1. + + vcc2-supply: + description: + The input supply for DCDC_REG2. + + vcc3-supply: + description: + The input supply for DCDC_REG3. + + vcc4-supply: + description: + The input supply for DCDC_REG4. + + vcc5-supply: + description: + The input supply for LDO_REG1, LDO_REG2, and LDO_REG3. + + vcc6-supply: + description: + The input supply for LDO_REG4, LDO_REG5, and LDO_REG6. + + vcc7-supply: + description: + The input supply for LDO_REG7, LDO_REG8, and LDO_REG9. + + vcc8-supply: + description: + The input supply for BOOST. + + vcc9-supply: + description: + The input supply for OTG_SWITCH. + + regulators: + type: object + patternProperties: + "^(LDO_REG[1-9]|DCDC_REG[1-4]|BOOST|OTG_SWITCH)$": + type: object + $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false + + clocks: + description: + The input clock for the audio codec. + + clock-names: + description: + The clock name for the codec clock. + items: + - const: mclk + + '#sound-dai-cells': + description: + Needed for the interpretation of sound dais. + const: 0 + + codec: + description: | + The child node for the codec to hold additional properties. If no + additional properties are required for the codec, this node can be + omitted. + type: object + properties: + rockchip,mic-in-differential: + type: boolean + description: + Describes if the microphone uses differential mode. + +allOf: + - if: + properties: + '#clock-cells': + const: 0 + + then: + properties: + clock-output-names: + maxItems: 1 + + else: + properties: + clock-output-names: + maxItems: 2 + +required: + - compatible + - reg + - interrupts + - "#clock-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/px30-cru.h> + #include <dt-bindings/pinctrl/rockchip.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/gpio/gpio.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + rk817: pmic@20 { + compatible = "rockchip,rk817"; + reg = <0x20>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>; + clock-output-names = "rk808-clkout1", "xin32k"; + clock-names = "mclk"; + clocks = <&cru SCLK_I2S1_OUT>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int>, <&i2s1_2ch_mclk>; + wakeup-source; + #clock-cells = <1>; + #sound-dai-cells = <0>; + + vcc1-supply = <&vccsys>; + vcc2-supply = <&vccsys>; + vcc3-supply = <&vccsys>; + vcc4-supply = <&vccsys>; + vcc5-supply = <&vccsys>; + vcc6-supply = <&vccsys>; + vcc7-supply = <&vccsys>; + + regulators { + vdd_logic: DCDC_REG1 { + regulator-name = "vdd_logic"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1150000>; + regulator-ramp-delay = <6001>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <950000>; + }; + }; + + vdd_arm: DCDC_REG2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <950000>; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_3v3: DCDC_REG4 { + regulator-name = "vcc_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_1v8: LDO_REG2 { + regulator-name = "vcc_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_1v0: LDO_REG3 { + regulator-name = "vdd_1v0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vcc3v3_pmu: LDO_REG4 { + regulator-name = "vcc3v3_pmu"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vccio_sd: LDO_REG5 { + regulator-name = "vccio_sd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_sd: LDO_REG6 { + regulator-name = "vcc_sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_bl: LDO_REG7 { + regulator-name = "vcc_bl"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_lcd: LDO_REG8 { + regulator-name = "vcc_lcd"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <2800000>; + }; + }; + + vcc_cam: LDO_REG9 { + regulator-name = "vcc_cam"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + }; + + rk817_codec: codec { + rockchip,mic-in-differential; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/rockchip,rk818.yaml b/Documentation/devicetree/bindings/mfd/rockchip,rk818.yaml new file mode 100644 index 000000000000..b57c4b005cf4 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/rockchip,rk818.yaml @@ -0,0 +1,282 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/rockchip,rk818.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RK818 Power Management Integrated Circuit + +maintainers: + - Chris Zhong <zyw@rock-chips.com> + - Zhang Qing <zhangqing@rock-chips.com> + +description: | + Rockchip RK818 series PMIC. This device consists of an i2c controlled MFD + that includes regulators, an RTC, and a power button. + +properties: + compatible: + enum: + - rockchip,rk818 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + '#clock-cells': + description: | + See <dt-bindings/clock/rockchip,rk808.h> for clock IDs. + const: 1 + + clock-output-names: + description: + From common clock binding to override the default output clock name. + maxItems: 2 + + rockchip,system-power-controller: + type: boolean + description: + Telling whether or not this PMIC is controlling the system power. + + wakeup-source: + type: boolean + description: + Device can be used as a wakeup source. + + vcc1-supply: + description: + The input supply for DCDC_REG1. + + vcc2-supply: + description: + The input supply for DCDC_REG2. + + vcc3-supply: + description: + The input supply for DCDC_REG3. + + vcc4-supply: + description: + The input supply for DCDC_REG4. + + boost-supply: + description: + The input supply for DCDC_BOOST + + vcc6-supply: + description: + The input supply for LDO_REG1 and LDO_REG2. + + vcc7-supply: + description: + The input supply for LDO_REG3, LDO_REG5, and LDO_REG7. + + vcc8-supply: + description: + The input supply for LDO_REG4, LDO_REG6, and LDO_REG8. + + vcc9-supply: + description: + The input supply for LDO_REG9 and SWITCH_REG. + + vddio-supply: + description: + The input supply for digital IO. + + h_5v-supply: + description: + The input supply for HDMI_SWITCH. + + usb-supply: + description: + The input supply for OTG_SWITCH. + + regulators: + type: object + patternProperties: + "^(DCDC_REG[1-4]|DCDC_BOOST|LDO_REG[1-9]|SWITCH_REG|HDMI_SWITCH|OTG_SWITCH)$": + type: object + $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false + +required: + - compatible + - reg + - interrupts + - "#clock-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/px30-cru.h> + #include <dt-bindings/pinctrl/rockchip.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/gpio/gpio.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + rk818: pmic@1c { + compatible = "rockchip,rk818"; + reg = <0x1c>; + interrupt-parent = <&gpio0>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int>; + rockchip,system-power-controller; + wakeup-source; + #clock-cells = <1>; + + vcc1-supply = <&vdd_sys>; + vcc2-supply = <&vdd_sys>; + vcc3-supply = <&vdd_sys>; + vcc4-supply = <&vdd_sys>; + boost-supply = <&vdd_in_otg_out>; + vcc6-supply = <&vdd_sys>; + vcc7-supply = <&vdd_misc_1v8>; + vcc8-supply = <&vdd_misc_1v8>; + vcc9-supply = <&vdd_3v3_io>; + vddio-supply = <&vdd_3v3_io>; + + regulators { + vdd_log: DCDC_REG1 { + regulator-name = "vdd_log"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu: DCDC_REG2 { + regulator-name = "vdd_gpu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1250000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vdd_3v3_io: DCDC_REG4 { + regulator-name = "vdd_3v3_io"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vdd_sys: DCDC_BOOST { + regulator-name = "vdd_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <5000000>; + }; + }; + + vdd_sd: SWITCH_REG { + regulator-name = "vdd_sd"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_eth_2v5: LDO_REG2 { + regulator-name = "vdd_eth_2v5"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <2500000>; + }; + }; + + vdd_1v0: LDO_REG3 { + regulator-name = "vdd_1v0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vdd_1v8_lcd_ldo: LDO_REG4 { + regulator-name = "vdd_1v8_lcd_ldo"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_1v0_lcd: LDO_REG6 { + regulator-name = "vdd_1v0_lcd"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vdd_1v8_ldo: LDO_REG7 { + regulator-name = "vdd_1v8_ldo"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_io_sd: LDO_REG9 { + regulator-name = "vdd_io_sd"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.txt b/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.txt deleted file mode 100644 index 30ea27c3936d..000000000000 --- a/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.txt +++ /dev/null @@ -1,72 +0,0 @@ -Samsung Exynos SoC Low Power Audio Subsystem (LPASS) - -Required properties: - - - compatible : "samsung,exynos5433-lpass" - - reg : should contain the LPASS top SFR region location - and size - - clock-names : should contain following required clocks: "sfr0_ctrl" - - clocks : should contain clock specifiers of all clocks, which - input names have been specified in clock-names - property, in same order. - - #address-cells : should be 1 - - #size-cells : should be 1 - - ranges : must be present - -Each IP block of the Low Power Audio Subsystem should be specified as -an optional sub-node. For "samsung,exynos5433-lpass" compatible this includes: -UART, SLIMBUS, PCM, I2S, DMAC, Timers 0...4, VIC, WDT 0...1 devices. - -Bindings of the sub-nodes are described in: - ../serial/samsung_uart.yaml - ../sound/samsung-i2s.txt - ../dma/arm-pl330.txt - - -Example: - -audio-subsystem { - compatible = "samsung,exynos5433-lpass"; - reg = <0x11400000 0x100>, <0x11500000 0x08>; - clocks = <&cmu_aud CLK_PCLK_SFR0_CTRL>; - clock-names = "sfr0_ctrl"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - adma: adma@11420000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x11420000 0x1000>; - interrupts = <0 73 0>; - clocks = <&cmu_aud CLK_ACLK_DMAC>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; - }; - - i2s0: i2s0@11440000 { - compatible = "samsung,exynos7-i2s"; - reg = <0x11440000 0x100>; - dmas = <&adma 0 &adma 2>; - dma-names = "tx", "rx"; - interrupts = <0 70 0>; - clocks = <&cmu_aud CLK_PCLK_AUD_I2S>, - <&cmu_aud CLK_SCLK_AUD_I2S>, - <&cmu_aud CLK_SCLK_I2S_BCLK>; - clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; - pinctrl-names = "default"; - pinctrl-0 = <&i2s0_bus>; - }; - - serial_3: serial@11460000 { - compatible = "samsung,exynos5433-uart"; - reg = <0x11460000 0x100>; - interrupts = <0 67 0>; - clocks = <&cmu_aud CLK_PCLK_AUD_UART>, - <&cmu_aud CLK_SCLK_AUD_UART>; - clock-names = "uart", "clk_uart_baud0"; - pinctrl-names = "default"; - pinctrl-0 = <&uart_aud_bus>; - }; - }; diff --git a/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.yaml b/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.yaml new file mode 100644 index 000000000000..b97b06848729 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.yaml @@ -0,0 +1,117 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/samsung,exynos5433-lpass.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung Exynos SoC Low Power Audio Subsystem (LPASS) + +maintainers: + - Krzysztof Kozlowski <krzk@kernel.org> + - Sylwester Nawrocki <s.nawrocki@samsung.com> + +properties: + compatible: + const: samsung,exynos5433-lpass + + '#address-cells': + const: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: sfr0_ctrl + + power-domains: + maxItems: 1 + + ranges: true + + reg: + minItems: 2 + maxItems: 2 + + '#size-cells': + const: 1 + +patternProperties: + "^dma-controller@[0-9a-f]+$": + $ref: /schemas/dma/arm,pl330.yaml + + "^i2s@[0-9a-f]+$": + $ref: /schemas/sound/samsung-i2s.yaml + + "^serial@[0-9a-f]+$": + $ref: /schemas/serial/samsung_uart.yaml + +required: + - compatible + - '#address-cells' + - clocks + - clock-names + - ranges + - reg + - '#size-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/exynos5433.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + audio-subsystem@11400000 { + compatible = "samsung,exynos5433-lpass"; + reg = <0x11400000 0x100>, <0x11500000 0x08>; + clocks = <&cmu_aud CLK_PCLK_SFR0_CTRL>; + clock-names = "sfr0_ctrl"; + power-domains = <&pd_aud>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + dma-controller@11420000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x11420000 0x1000>; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu_aud CLK_ACLK_DMAC>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + dma-channels = <8>; + dma-requests = <32>; + power-domains = <&pd_aud>; + }; + + i2s@11440000 { + compatible = "samsung,exynos7-i2s"; + reg = <0x11440000 0x100>; + dmas = <&adma 0>, <&adma 2>; + dma-names = "tx", "rx"; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cmu_aud CLK_PCLK_AUD_I2S>, + <&cmu_aud CLK_SCLK_AUD_I2S>, + <&cmu_aud CLK_SCLK_I2S_BCLK>; + clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; + #clock-cells = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&i2s0_bus>; + power-domains = <&pd_aud>; + #sound-dai-cells = <1>; + }; + + serial@11460000 { + compatible = "samsung,exynos5433-uart"; + reg = <0x11460000 0x100>; + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu_aud CLK_PCLK_AUD_UART>, + <&cmu_aud CLK_SCLK_AUD_UART>; + clock-names = "uart", "clk_uart_baud0"; + pinctrl-names = "default"; + pinctrl-0 = <&uart_aud_bus>; + power-domains = <&pd_aud>; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/samsung,s2mpa01.yaml b/Documentation/devicetree/bindings/mfd/samsung,s2mpa01.yaml index 017befdf8adb..055dfc337c2f 100644 --- a/Documentation/devicetree/bindings/mfd/samsung,s2mpa01.yaml +++ b/Documentation/devicetree/bindings/mfd/samsung,s2mpa01.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Samsung S2MPA01 Power Management IC maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> description: | This is a part of device tree bindings for S2M and S5M family of Power diff --git a/Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml b/Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml index 771b3f16da96..5ff6546c72b7 100644 --- a/Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml +++ b/Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Samsung S2MPS11/13/14/15 and S2MPU02 Power Management IC maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> description: | This is a part of device tree bindings for S2M and S5M family of Power diff --git a/Documentation/devicetree/bindings/mfd/samsung,s5m8767.yaml b/Documentation/devicetree/bindings/mfd/samsung,s5m8767.yaml index 5531718abdf0..10c7b408f33a 100644 --- a/Documentation/devicetree/bindings/mfd/samsung,s5m8767.yaml +++ b/Documentation/devicetree/bindings/mfd/samsung,s5m8767.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Samsung S5M8767 Power Management IC maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> description: | This is a part of device tree bindings for S2M and S5M family of Power diff --git a/Documentation/devicetree/bindings/mfd/silergy,sy7636a.yaml b/Documentation/devicetree/bindings/mfd/silergy,sy7636a.yaml new file mode 100644 index 000000000000..6de74c701635 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/silergy,sy7636a.yaml @@ -0,0 +1,82 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/silergy,sy7636a.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: silergy sy7636a PMIC + +maintainers: + - Alistair Francis <alistair@alistair23.me> + +properties: + compatible: + const: silergy,sy7636a + + reg: + description: + I2C device address. + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + '#thermal-sensor-cells': + const: 0 + + epd-pwr-good-gpios: + description: + Specifying the power good GPIOs. + maxItems: 1 + + regulators: + type: object + + properties: + compatible: + const: silergy,sy7636a-regulator + + vcom: + type: object + $ref: /schemas/regulator/regulator.yaml# + description: + The regulator for the compenstation voltage. Enabling/disabling this + enables/disables the entire device. + properties: + regulator-name: + const: vcom + + additionalProperties: false + +required: + - compatible + - reg + - '#thermal-sensor-cells' + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@62 { + compatible = "silergy,sy7636a"; + reg = <0x62>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_epdpmic>; + #thermal-sensor-cells = <0>; + + regulators { + reg_epdpmic: vcom { + regulator-name = "vcom"; + regulator-boot-on; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/mfd/stericsson,ab8500.yaml b/Documentation/devicetree/bindings/mfd/stericsson,ab8500.yaml new file mode 100644 index 000000000000..623a4b5cd27a --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/stericsson,ab8500.yaml @@ -0,0 +1,500 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/stericsson,ab8500.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ST-Ericsson Analog Baseband AB8500 and AB8505 + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +description: + the AB8500 "Analog Baseband" is the mixed-signals integrated circuit + handling power management (regulators), analog-to-digital conversion + (ADC), battery charging, fuel gauging of the battery, battery-backed + RTC, PWM, USB PHY and some GPIO lines in the ST-Ericsson U8500 platforms + in connection with the DB8500 digital baseband. The DB8500 PRCMU + communicates directly and autonomously with the AB8500 and thus it + appears as a subnode of the DB8500 PRCMU. An altered version called + AB8505 also exist, the difference in AB8505 is that some of the USB and + USB charging handling has changed, and it has an embedded USB-to-serial + converter. Most subblocks takes their interrupts directly from the + AB8500 embedded interrupt controller. + +properties: + $nodename: + pattern: '^ab850[05]$' + + compatible: + enum: + - stericsson,ab8500 + - stericsson,ab8505 + + interrupts: + maxItems: 1 + + interrupt-controller: true + + '#interrupt-cells': + const: 2 + + # Some subnodes use a reg, some don't. Those that do use a single cell. + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + clock-controller: + description: Node describing the AB8500 clock controller. This + provides the reference clock for the entire U8500 system and + the DB8500 counterpart. + type: object + + properties: + compatible: + const: stericsson,ab8500-clk + + '#clock-cells': + const: 1 + + gpio: + description: Node describing the AB8500 GPIO controller. A few + GPIO pins available for misc usage. + type: object + + properties: + compatible: + enum: + - stericsson,ab8500-gpio + - stericsson,ab8505-gpio + + gpio-controller: true + + '#gpio-cells': + const: 2 + + rtc: + description: Node describing the AB8500 battery-backed RTC. + type: object + + properties: + compatible: + const: stericsson,ab8500-rtc + + interrupts: + items: + - description: 60 second interval alarm interrupt + - description: RTC alarm + + interrupt-names: + items: + - const: 60S + - const: ALARM + + adc: + description: Node describing the AB8500 general purpose analog to digital + converter, GPADC. + type: object + + properties: + compatible: + const: stericsson,ab8500-gpadc + + # AB8505 only supports one (software) EOC interrupt + interrupts: + minItems: 1 + maxItems: 2 + + interrupt-names: true + + vddadc-supply: true + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + '#io-channel-cells': + const: 1 + + patternProperties: + "^channel@[0-9a-f]+$": + type: object + $ref: ../iio/adc/adc.yaml# + description: Represents each of the external channels which are + connected to the ADC. + + properties: + reg: + items: + minimum: 1 + maximum: 31 + + required: + - reg + + additionalProperties: false + + required: + - compatible + - interrupts + - interrupt-names + - vddadc-supply + - '#address-cells' + - '#size-cells' + - '#io-channel-cells' + + additionalProperties: false + + thermal: + description: Node describing the AB8500 thermal control block. All this block + really does is to fire an interrupt when the die becomes 130 degrees Celsius + in temperature. + type: object + + properties: + compatible: + const: stericsson,abx500-temp + + interrupts: + items: + - description: Thermal warm warning interrupt + + interrupt-names: + items: + - const: ABX500_TEMP_WARM + + required: + - compatible + - interrupts + - interrupt-names + + additionalProperties: false + + ab8500_fg: + description: Node describing the AB8500 fuel gauge control block. + type: object + $ref: ../power/supply/stericsson,ab8500-fg.yaml + + ab8500_btemp: + description: Node describing the AB8500 battery temperature control block. + type: object + $ref: ../power/supply/stericsson,ab8500-btemp.yaml + + ab8500_charger: + description: Node describing the AB8500 battery charger control block. + type: object + $ref: ../power/supply/stericsson,ab8500-charger.yaml + + ab8500_chargalg: + description: Node describing the AB8500 battery charger algorithm. + type: object + $ref: ../power/supply/stericsson,ab8500-chargalg.yaml + + phy: + description: Node describing the AB8500 USB PHY control block. + type: object + + properties: + compatible: + const: stericsson,ab8500-usb + + interrupts: + items: + - description: ID wakeup rising IRQ + - description: ID wakeup falling IRQ + - description: VBUS detection falling IRQ + - description: VBUS detection rising IRQ + - description: USB link status change IRQ + - description: ADP probe plug IRQ + - description: ADP probe unplug IRQ + + interrupt-names: + items: + - const: ID_WAKEUP_R + - const: ID_WAKEUP_F + - const: VBUS_DET_F + - const: VBUS_DET_R + - const: USB_LINK_STATUS + - const: USB_ADP_PROBE_PLUG + - const: USB_ADP_PROBE_UNPLUG + + vddulpivio18-supply: true + v-ape-supply: true + musb_1v8-supply: true + + clocks: + items: + - description: PRCMY system clock + + clock-names: + items: + - const: sysclk + + '#phy-cells': + const: 0 + + required: + - compatible + - interrupts + - interrupt-names + - vddulpivio18-supply + - v-ape-supply + - musb_1v8-supply + - clocks + - clock-names + - '#phy-cells' + + additionalProperties: false + + key: + description: Node describing the AB8500 power-on key control block. + type: object + + properties: + compatible: + const: stericsson,ab8500-poweron-key + + interrupts: + items: + - description: ON key falling IRQ + - description: ON key rising IRQ + + interrupt-names: + items: + - const: ONKEY_DBF + - const: ONKEY_DBR + + required: + - compatible + - interrupts + - interrupt-names + + additionalProperties: false + + ab8500-sysctrl: + description: Node describing the AB8500 system control block. + type: object + + properties: + compatible: + const: stericsson,ab8500-sysctrl + + required: + - compatible + + additionalProperties: false + + codec: + description: Node describing the AB8500 audio codec block. + type: object + + properties: + compatible: + const: stericsson,ab8500-codec + + V-AUD-supply: true + V-AMIC1-supply: true + V-AMIC2-supply: true + V-DMIC-supply: true + + clocks: + items: + - description: Audio system clock + + clock-names: + items: + - const: audioclk + + stericsson,earpeice-cmv: + description: Earpeice voltage + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 950, 1100, 1270, 1580 ] + + required: + - compatible + + additionalProperties: false + + regulator: + description: Node describing the AB8500 internal regulators. + type: object + + properties: + compatible: + enum: + - stericsson,ab8500-regulator + - stericsson,ab8505-regulator + + vin-supply: + description: The regulator supplying all of the internal regulators + with power. + + ab8500_ldo_aux1: + description: The voltage for the auxilary LDO regulator 1 + type: object + $ref: ../regulator/regulator.yaml# + + ab8500_ldo_aux2: + description: The voltage for the auxilary LDO regulator 2 + type: object + $ref: ../regulator/regulator.yaml# + + ab8500_ldo_aux3: + description: The voltage for the auxilary LDO regulator 3 + type: object + $ref: ../regulator/regulator.yaml# + + ab8500_ldo_aux4: + description: The voltage for the auxilary LDO regulator 4 + only present on AB8505 + type: object + $ref: ../regulator/regulator.yaml# + + ab8500_ldo_aux5: + description: The voltage for the auxilary LDO regulator 5 + only present on AB8505 + type: object + $ref: ../regulator/regulator.yaml# + + ab8500_ldo_aux6: + description: The voltage for the auxilary LDO regulator 6 + only present on AB8505 + type: object + $ref: ../regulator/regulator.yaml# + + # There is never any AUX7 regulator which is confusing + + ab8500_ldo_aux8: + description: The voltage for the auxilary LDO regulator 8 + only present on AB8505 + type: object + $ref: ../regulator/regulator.yaml# + + ab8500_ldo_intcore: + description: The LDO regulator for the internal core voltage + of the AB8500 + type: object + $ref: ../regulator/regulator.yaml# + + ab8500_ldo_adc: + description: Analog power regulator for the analog to digital converter + ADC, only present on AB8505 + type: object + $ref: ../regulator/regulator.yaml# + + ab8500_ldo_tvout: + description: The voltage for the TV output regulator, incidentally + this voltage is also used for other purposes such as measuring + the temperature of the NTC thermistor on the battery. + Only present on AB8500. + type: object + $ref: ../regulator/regulator.yaml# + + ab8500_ldo_audio: + description: The LDO regulator for the audio codec output + type: object + $ref: ../regulator/regulator.yaml# + + ab8500_ldo_anamic1: + description: The LDO regulator for the analog microphone 1 + type: object + $ref: ../regulator/regulator.yaml# + + ab8500_ldo_anamic2: + description: The LDO regulator for the analog microphone 2 + type: object + $ref: ../regulator/regulator.yaml# + + ab8500_ldo_dmic: + description: The LDO regulator for the digital microphone + only present on AB8500 + type: object + $ref: ../regulator/regulator.yaml# + + ab8500_ldo_ana: + description: Analog power regulator for CSI and DSI interfaces, + Camera Serial Interface CSI and Display Serial Interface DSI. + type: object + $ref: ../regulator/regulator.yaml# + + required: + - compatible + + additionalProperties: false + + + regulator-external: + description: Node describing the AB8500 external regulators. This + concerns the autonomous regulators VSMPS1, VSMPS2 and VSMPS3 + that are normally controlled by external electronics but also + sometimes need to be explicitly controlled by software. + type: object + + properties: + compatible: + const: stericsson,ab8500-ext-regulator + + ab8500_ext1: + description: The voltage for the VSMPS1 external regulator + type: object + $ref: ../regulator/regulator.yaml# + + ab8500_ext2: + description: The voltage for the VSMPS2 external regulator + type: object + $ref: ../regulator/regulator.yaml# + + ab8500_ext3: + description: The voltage for the VSMPS3 external regulator + type: object + $ref: ../regulator/regulator.yaml# + + required: + - compatible + + additionalProperties: false + +patternProperties: + "^pwm@[1-9]+?$": + type: object + $ref: ../pwm/pwm.yaml# + description: Represents each of the PWM blocks in the AB8500 + + properties: + compatible: + const: stericsson,ab8500-pwm + + reg: true + + clocks: + items: + - description: internal clock + + clock-names: + items: + - const: intclk + + required: + - compatible + - reg + +required: + - compatible + - clock-controller + - gpio + - rtc + - adc + - thermal + - ab8500_fg + - ab8500_btemp + - ab8500_charger + - ab8500_chargalg + - phy + - key + - regulator + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/mfd/stericsson,db8500-prcmu.yaml b/Documentation/devicetree/bindings/mfd/stericsson,db8500-prcmu.yaml index a0d4bad5dc81..1d4d88f7e82d 100644 --- a/Documentation/devicetree/bindings/mfd/stericsson,db8500-prcmu.yaml +++ b/Documentation/devicetree/bindings/mfd/stericsson,db8500-prcmu.yaml @@ -263,6 +263,7 @@ patternProperties: set of devicetree bindings. The AB8505 is a newer version of the same ASIC. type: object + $ref: stericsson,ab8500.yaml# required: - compatible diff --git a/Documentation/devicetree/bindings/mfd/syscon.yaml b/Documentation/devicetree/bindings/mfd/syscon.yaml index eeac1cbc5a17..fb784045013f 100644 --- a/Documentation/devicetree/bindings/mfd/syscon.yaml +++ b/Documentation/devicetree/bindings/mfd/syscon.yaml @@ -44,6 +44,11 @@ properties: - hisilicon,hi6220-sramctrl - hisilicon,pcie-sas-subctrl - hisilicon,peri-subctrl + - intel,lgm-syscon + - marvell,armada-3700-usb2-host-misc + - mediatek,mt8135-pctl-a-syscfg + - mediatek,mt8135-pctl-b-syscfg + - microchip,lan966x-cpu-syscon - microchip,sparx5-cpu-syscon - mstar,msc313-pmsleep - rockchip,px30-qos @@ -95,12 +100,4 @@ examples: compatible = "allwinner,sun8i-h3-system-controller", "syscon"; reg = <0x01c00000 0x1000>; }; - - - | - gpr: iomuxc-gpr@20e0000 { - compatible = "fsl,imx6q-iomuxc-gpr", "syscon"; - reg = <0x020e0000 0x38>; - hwlocks = <&hwlock1 1>; - }; - ... diff --git a/Documentation/devicetree/bindings/mfd/wlf,arizona.yaml b/Documentation/devicetree/bindings/mfd/wlf,arizona.yaml index 9e762d474218..ea3337dafaf5 100644 --- a/Documentation/devicetree/bindings/mfd/wlf,arizona.yaml +++ b/Documentation/devicetree/bindings/mfd/wlf,arizona.yaml @@ -14,6 +14,7 @@ description: | range of analogue I/O. allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml - $ref: /schemas/sound/wlf,arizona.yaml# - $ref: /schemas/regulator/wlf,arizona.yaml# - $ref: /schemas/extcon/wlf,arizona.yaml# |