diff options
Diffstat (limited to 'Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.txt')
-rw-r--r-- | Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.txt | 53 |
1 files changed, 0 insertions, 53 deletions
diff --git a/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.txt b/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.txt deleted file mode 100644 index ae2074184528..000000000000 --- a/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.txt +++ /dev/null @@ -1,53 +0,0 @@ -* BROADCOM BRCMSTB/BMIPS SDHCI Controller - -This file documents differences between the core properties in mmc.txt -and the properties used by the sdhci-brcmstb driver. - -NOTE: The driver disables all UHS speed modes by default and depends -on Device Tree properties to enable them for SoC/Board combinations -that support them. - -Required properties: -- compatible: should be one of the following - - "brcm,bcm7425-sdhci" - - "brcm,bcm7445-sdhci" - - "brcm,bcm7216-sdhci" - -Refer to clocks/clock-bindings.txt for generic clock consumer properties. - -Example: - - sdhci@84b0000 { - sd-uhs-sdr50; - sd-uhs-ddr50; - sd-uhs-sdr104; - sdhci,auto-cmd12; - compatible = "brcm,bcm7216-sdhci", - "brcm,bcm7445-sdhci", - "brcm,sdhci-brcmstb"; - reg = <0x84b0000 0x260 0x84b0300 0x200>; - reg-names = "host", "cfg"; - interrupts = <0x0 0x26 0x4>; - interrupt-names = "sdio0_0"; - clocks = <&scmi_clk 245>; - clock-names = "sw_sdio"; - }; - - sdhci@84b1000 { - mmc-ddr-1_8v; - mmc-hs200-1_8v; - mmc-hs400-1_8v; - mmc-hs400-enhanced-strobe; - supports-cqe; - non-removable; - bus-width = <0x8>; - compatible = "brcm,bcm7216-sdhci", - "brcm,bcm7445-sdhci", - "brcm,sdhci-brcmstb"; - reg = <0x84b1000 0x260 0x84b1300 0x200>; - reg-names = "host", "cfg"; - interrupts = <0x0 0x27 0x4>; - interrupt-names = "sdio1_0"; - clocks = <&scmi_clk 245>; - clock-names = "sw_sdio"; - }; |